2946 files changed, 172753 insertions, 260549 deletions

diff --git a/.gitignore b/.gitignore
index a2939fc10b2..8faa6c02b39 100644
--- a/.gitignore
+++ b/.gitignore
@@ -28,6 +28,7 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
+*.lzo
 *.patch
 *.gcno
 
diff --git a/Documentation/.gitignore b/Documentation/.gitignore
new file mode 100644
index 00000000000..bcd907b4141
--- /dev/null
+++ b/Documentation/.gitignore
@@ -0,0 +1,7 @@
+filesystems/dnotify_test
+laptops/dslm
+timers/hpet_example
+vm/hugepage-mmap
+vm/hugepage-shm
+vm/map_hugetlb
+
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index dd10b51b4e6..5405f7aecef 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@ DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
-	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
@@ -84,6 +82,8 @@ blockdev/
 	- info on block devices & drivers
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
@@ -168,6 +168,8 @@ initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+io-mapping.txt
+	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/
diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 00000000000..6546115a94d
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 428676cfa61..25be3250f7d 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -133,46 +133,6 @@ Description:
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
-
-What:		/sys/bus/pci/slots/...
-Date:		April 2005 (possibly older)
-KernelVersion:	2.6.12 (possibly older)
-Contact:	linux-pci@vger.kernel.org
-Description:
-		When the appropriate driver is loaded, it will create a
-		directory per claimed physical PCI slot in
-		/sys/bus/pci/slots/.  The names of these directories are
-		specific to the driver, which in turn, are specific to the
-		platform, but in general, should match the label on the
-		machine's physical chassis.
-
-		The drivers that can create slot directories include the
-		PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
-
-		The slot directories contain, at a minimum, a file named
-		'address' which contains the PCI bus:device:function tuple.
-		Other files may appear as well, but are specific to the
-		driver.
-
-What:		/sys/bus/pci/slots/.../function[0-7]
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		and the physical slot is actually populated with a device,
-		symbolic links in the slot directory pointing to the
-		device's PCI functions are created as well.
-
-What:		/sys/bus/pci/devices/.../slot
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		a symbolic link pointing to the slot directory will be
-		created as well.
-
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index d6a801f45b4..2875f1f74a0 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -114,3 +114,18 @@ Description:
 		if this file contains "1", which is the default.  It may be
 		disabled by writing "0" to this file, in which case all devices
 		will be suspended and resumed synchronously.
+
+What:		/sys/power/wakeup_count
+Date:		July 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wakeup_count file allows user space to put the
+		system into a sleep state while taking into account the
+		concurrent arrival of wakeup events.  Reading from it returns
+		the current number of registered wakeup events and it blocks if
+		some wakeup events are being processed at the time the file is
+		read from.  Writing to it will only succeed if the current
+		number of wakeup events is equal to the written value and, if
+		successful, will make the kernel abort a subsequent transition
+		to a sleep state if any wakeup events are reported after the
+		write has returned.
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 7583dc7cf64..910c923a9b8 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -389,7 +389,7 @@
       </para>
       <para>
 	If your driver supports memory management (it should!), you'll
-	need to set that up at load time as well.  How you intialize
+	need to set that up at load time as well.  How you initialize
 	it depends on which memory manager you're using, TTM or GEM.
       </para>
       <sect3>
@@ -399,7 +399,7 @@
 	  aperture space for graphics devices. TTM supports both UMA devices
 	  and devices with dedicated video RAM (VRAM), i.e. most discrete
 	  graphics devices.  If your device has dedicated RAM, supporting
-	  TTM is desireable.  TTM also integrates tightly with your
+	  TTM is desirable.  TTM also integrates tightly with your
 	  driver specific buffer execution function.  See the radeon
 	  driver for examples.
 	</para>
@@ -443,7 +443,7 @@
 	  likely eventually calling ttm_bo_global_init and
 	  ttm_bo_global_release, respectively.  Also like the previous
 	  object, ttm_global_item_ref is used to create an initial reference
-	  count for the TTM, which will call your initalization function.
+	  count for the TTM, which will call your initialization function.
 	</para>
       </sect3>
       <sect3>
@@ -557,7 +557,7 @@ void intel_crt_init(struct drm_device *dev)
 	  CRT connector and encoder combination is created.  A device
 	  specific i2c bus is also created, for fetching EDID data and
 	  performing monitor detection.  Once the process is complete,
-	  the new connector is regsitered with sysfs, to make its
+	  the new connector is registered with sysfs, to make its
 	  properties available to applications.
 	</para>
 	<sect4>
@@ -581,12 +581,12 @@ void intel_crt_init(struct drm_device *dev)
 	<para>
 	  For each encoder, CRTC and connector, several functions must
 	  be provided, depending on the object type.  Encoder objects
-	  need should provide a DPMS (basically on/off) function, mode fixup
+	  need to provide a DPMS (basically on/off) function, mode fixup
 	  (for converting requested modes into native hardware timings),
 	  and prepare, set and commit functions for use by the core DRM
 	  helper functions.  Connector helpers need to provide mode fetch and
 	  validity functions as well as an encoder matching function for
-	  returing an ideal encoder for a given connector.  The core
+	  returning an ideal encoder for a given connector.  The core
 	  connector functions include a DPMS callback, (deprecated)
 	  save/restore routines, detection, mode probing, property handling,
 	  and cleanup functions.
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index 63c528fee62..e3a97fdd62a 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -12,10 +12,12 @@
 <othername role="mi">O. C.</othername>
 <affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
 </author>
+</authorgroup>
+<authorgroup>
 <author>
 <firstname>Mauro</firstname>
-<surname>Chehab</surname>
 <othername role="mi">Carvalho</othername>
+<surname>Chehab</surname>
 <affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
 <contrib>Ported document to Docbook XML.</contrib>
 </author>
@@ -23,13 +25,24 @@
 <copyright>
 	<year>2002</year>
 	<year>2003</year>
-	<year>2009</year>
 	<holder>Convergence GmbH</holder>
 </copyright>
+<copyright>
+	<year>2009-2010</year>
+	<holder>Mauro Carvalho Chehab</holder>
+</copyright>
 
 <revhistory>
 <!-- Put document revisions here, newest first. -->
 <revision>
+	<revnumber>2.0.3</revnumber>
+	<date>2010-07-03</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add some frontend capabilities flags, present on kernel, but missing at the specs.
+	</revremark>
+</revision>
+<revision>
 	<revnumber>2.0.2</revnumber>
 	<date>2009-10-25</date>
 	<authorinitials>mcc</authorinitials>
@@ -63,7 +76,7 @@ Added ISDB-T test originally written by Patrick Boettcher
 
 
 <title>LINUX DVB API</title>
-<subtitle>Version 3</subtitle>
+<subtitle>Version 5.2</subtitle>
 <!-- ADD THE CHAPTERS HERE -->
   <chapter id="dvb_introdution">
     &sub-intro;
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
index b99644f5340..d08e0d40141 100644
--- a/Documentation/DocBook/dvb/frontend.h.xml
+++ b/Documentation/DocBook/dvb/frontend.h.xml
@@ -63,6 +63,7 @@ typedef enum fe_caps {
         FE_CAN_8VSB                     = 0x200000,
         FE_CAN_16VSB                    = 0x400000,
         FE_HAS_EXTENDED_CAPS            = 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+        FE_CAN_TURBO_FEC                = 0x8000000,  /* frontend supports "turbo fec modulation" */
         FE_CAN_2G_MODULATION            = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
         FE_NEEDS_BENDING                = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
         FE_CAN_RECOVER                  = 0x40000000, /* frontend can recover from a cable unplug automatically */
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 300ba1f0417..78d756de590 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -64,8 +64,14 @@ a specific frontend type.</para>
 	FE_CAN_BANDWIDTH_AUTO         = 0x40000,
 	FE_CAN_GUARD_INTERVAL_AUTO    = 0x80000,
 	FE_CAN_HIERARCHY_AUTO         = 0x100000,
-	FE_CAN_MUTE_TS                = 0x80000000,
-	FE_CAN_CLEAN_SETUP            = 0x40000000
+	FE_CAN_8VSB                   = 0x200000,
+	FE_CAN_16VSB                  = 0x400000,
+	FE_HAS_EXTENDED_CAPS          = 0x800000,
+	FE_CAN_TURBO_FEC              = 0x8000000,
+	FE_CAN_2G_MODULATION          = 0x10000000,
+	FE_NEEDS_BENDING              = 0x20000000,
+	FE_CAN_RECOVER                = 0x40000000,
+	FE_CAN_MUTE_TS                = 0x80000000
 	} fe_caps_t;
 </programlisting>
 </section>
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 5d4d40f429a..6ae97157b1c 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -218,6 +218,7 @@
 <!ENTITY sub-dev-teletext SYSTEM "v4l/dev-teletext.xml">
 <!ENTITY sub-driver SYSTEM "v4l/driver.xml">
 <!ENTITY sub-libv4l SYSTEM "v4l/libv4l.xml">
+<!ENTITY sub-lirc_device_interface SYSTEM "v4l/lirc_device_interface.xml">
 <!ENTITY sub-remote_controllers SYSTEM "v4l/remote_controllers.xml">
 <!ENTITY sub-fdl-appendix SYSTEM "v4l/fdl-appendix.xml">
 <!ENTITY sub-close SYSTEM "v4l/func-close.xml">
diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl
index eea564bb12c..f11048d4053 100644
--- a/Documentation/DocBook/media.tmpl
+++ b/Documentation/DocBook/media.tmpl
@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009</year>
+	<year>2009-2010</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -61,7 +61,7 @@ Foundation. A copy of the license is included in the chapter entitled
 		in fact it covers several different video standards including
 		DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
 		to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
-	<para>The third part covers other API's used by all media infrastructure devices</para>
+	<para>The third part covers Remote Controller API</para>
 	<para>For additional information and for the latest development code,
 		see: <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
 	<para>For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: <ulink url="http://vger.kernel.org/vger-lists.html#linux-media">Linux Media Mailing List (LMML).</ulink>.</para>
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009</year>
+	<year>2009-2010</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 
@@ -101,7 +101,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </revhistory>
 </partinfo>
 
-<title>Other API's used by media infrastructure drivers</title>
+<title>Remote Controller API</title>
 <chapter id="remote_controllers">
 &sub-remote_controllers;
 </chapter>
diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml
new file mode 100644
index 00000000000..0413234023d
--- /dev/null
+++ b/Documentation/DocBook/v4l/lirc_device_interface.xml
@@ -0,0 +1,235 @@
+<section id="lirc_dev">
+<title>LIRC Device Interface</title>
+
+
+<section id="lirc_dev_intro">
+<title>Introduction</title>
+
+<para>The LIRC device interface is a bi-directional interface for
+transporting raw IR data between userspace and kernelspace. Fundamentally,
+it is just a chardev (/dev/lircX, for X = 0, 1, 2, ...), with a number
+of standard struct file_operations defined on it. With respect to
+transporting raw IR data to and fro, the essential fops are read, write
+and ioctl.</para>
+
+<para>Example dmesg output upon a driver registering w/LIRC:</para>
+  <blockquote>
+    <para>$ dmesg |grep lirc_dev</para>
+    <para>lirc_dev: IR Remote Control driver registered, major 248</para>
+    <para>rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0</para>
+  </blockquote>
+
+<para>What you should see for a chardev:</para>
+  <blockquote>
+    <para>$ ls -l /dev/lirc*</para>
+    <para>crw-rw---- 1 root root 248, 0 Jul  2 22:20 /dev/lirc0</para>
+  </blockquote>
+</section>
+
+<section id="lirc_read">
+<title>LIRC read fop</title>
+
+<para>The lircd userspace daemon reads raw IR data from the LIRC chardev. The
+exact format of the data depends on what modes a driver supports, and what
+mode has been selected. lircd obtains supported modes and sets the active mode
+via the ioctl interface, detailed at <xref linkend="lirc_ioctl"/>. The generally
+preferred mode is LIRC_MODE_MODE2, in which packets containing an int value
+describing an IR signal are read from the chardev.</para>
+
+<para>See also <ulink url="http://www.lirc.org/html/technical.html">http://www.lirc.org/html/technical.html</ulink> for more info.</para>
+</section>
+
+<section id="lirc_write">
+<title>LIRC write fop</title>
+
+<para>The data written to the chardev is a pulse/space sequence of integer
+values. Pulses and spaces are only marked implicitly by their position. The
+data must start and end with a pulse, therefore, the data must always include
+an unevent number of samples. The write function must block until the data has
+been transmitted by the hardware.</para>
+</section>
+
+<section id="lirc_ioctl">
+<title>LIRC ioctl fop</title>
+
+<para>The LIRC device's ioctl definition is bound by the ioctl function
+definition of struct file_operations, leaving us with an unsigned int
+for the ioctl command and an unsigned long for the arg. For the purposes
+of ioctl portability across 32-bit and 64-bit, these values are capped
+to their 32-bit sizes.</para>
+
+<para>The following ioctls can be used to change specific hardware settings.
+In general each driver should have a default set of settings. The driver
+implementation is expected to re-apply the default settings when the device
+is closed by user-space, so that every application opening the device can rely
+on working with the default settings initially.</para>
+
+<variablelist>
+  <varlistentry>
+    <term>LIRC_GET_FEATURES</term>
+    <listitem>
+      <para>Obviously, get the underlying hardware device's features. If a driver
+      does not announce support of certain features, calling of the corresponding
+      ioctls is undefined.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_SEND_MODE</term>
+    <listitem>
+      <para>Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_MODE</term>
+    <listitem>
+      <para>Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE
+      are supported by lircd.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_SEND_CARRIER</term>
+    <listitem>
+      <para>Get carrier frequency (in Hz) currently used for transmit.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_CARRIER</term>
+    <listitem>
+      <para>Get carrier frequency (in Hz) currently used for IR reception.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE</term>
+    <listitem>
+      <para>Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently,
+      no special meaning is defined for 0 or 100, but this could be used to switch
+      off carrier generation in the future, so these values should be reserved.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_RESOLUTION</term>
+    <listitem>
+      <para>Some receiver have maximum resolution which is defined by internal
+      sample rate or data format limitations. E.g. it's common that signals can
+      only be reported in 50 microsecond steps. This integer value is used by
+      lircd to automatically adjust the aeps tolerance value in the lircd
+      config file.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_M{IN,AX}_TIMEOUT</term>
+    <listitem>
+      <para>Some devices have internal timers that can be used to detect when
+      there's no IR activity for a long time. This can help lircd in detecting
+      that a IR signal is finished and can speed up the decoding process.
+      Returns an integer value with the minimum/maximum timeout that can be
+      set. Some devices have a fixed timeout, in that case both ioctls will
+      return the same value even though the timeout cannot be changed.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE}</term>
+    <listitem>
+      <para>Some devices are able to filter out spikes in the incoming signal
+      using given filter rules. These ioctls return the hardware capabilities
+      that describe the bounds of the possible filters. Filter settings depend
+      on the IR protocols that are expected. lircd derives the settings from
+      all protocols definitions found in its config file.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_LENGTH</term>
+    <listitem>
+      <para>Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE).
+      Reads on the device must be done in blocks matching the bit count.
+      The bit could should be rounded up so that it matches full bytes.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_{SEND,REC}_MODE</term>
+    <listitem>
+      <para>Set send/receive mode. Largely obsolete for send, as only
+      LIRC_MODE_PULSE is supported.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_{SEND,REC}_CARRIER</term>
+    <listitem>
+      <para>Set send/receive carrier (in Hz).</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_TRANSMITTER_MASK</term>
+    <listitem>
+      <para>This enables the given set of transmitters. The first transmitter
+      is encoded by the least significant bit, etc. When an invalid bit mask
+      is given, i.e. a bit is set, even though the device does not have so many
+      transitters, then this ioctl returns the number of available transitters
+      and does nothing otherwise.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_TIMEOUT</term>
+    <listitem>
+      <para>Sets the integer value for IR inactivity timeout (cf.
+      LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if
+      supported by the hardware) disables all hardware timeouts and data should
+      be reported as soon as possible. If the exact value cannot be set, then
+      the next possible value _greater_ than the given value should be set.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_TIMEOUT_REPORTS</term>
+    <listitem>
+      <para>Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By
+      default, timeout reports should be turned off.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_FILTER_{,PULSE,SPACE}</term>
+    <listitem>
+      <para>Pulses/spaces shorter than this are filtered out by hardware. If
+      filters cannot be set independently for pulse/space, the corresponding
+      ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_MEASURE_CARRIER_MODE</term>
+    <listitem>
+      <para>Enable (1)/disable (0) measure mode. If enabled, from the next key
+      press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default
+      this should be turned off.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE</term>
+    <listitem>
+      <para>To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE
+      with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER
+      with the upper bound.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_NOTIFY_DECODE</term>
+    <listitem>
+      <para>This ioctl is called by lircd whenever a successful decoding of an
+      incoming IR signal could be done. This can be used by supporting hardware
+      to give visual feedback to the user e.g. by flashing a LED.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SETUP_{START,END}</term>
+    <listitem>
+      <para>Setting of several driver parameters can be optimized by encapsulating
+      the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a
+      driver receives a LIRC_SETUP_START ioctl it can choose to not commit
+      further setting changes to the hardware until a LIRC_SETUP_END is received.
+      But this is open to the driver implementation and every driver must also
+      handle parameter changes which are not encapsulated by LIRC_SETUP_START
+      and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
+    </listitem>
+  </varlistentry>
+</variablelist>
+
+</section>
+</section>
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml
index 73f5eab091f..3c3b667b28e 100644
--- a/Documentation/DocBook/v4l/remote_controllers.xml
+++ b/Documentation/DocBook/v4l/remote_controllers.xml
@@ -173,3 +173,5 @@ keymapping.</para>
 <para>This program demonstrates how to replace the keymap tables.</para>
 &sub-keytable-c;
 </section>
+
+&sub-lirc_device_interface;
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 9737243377a..7c3c098d5d0 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -58,7 +58,7 @@ MPEG stream embedded, sliced VBI data format in this specification.
 </contrib>
 	<affiliation>
 	  <address>
-	    <email>awalls@radix.net</email>
+	    <email>awalls@md.metrocast.net</email>
 	  </address>
 	</affiliation>
       </author>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
index 87e4f0f6151..402229ee06f 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -53,8 +53,10 @@ input</refpurpose>
 automatically, similar to sensing the video standard. To do so, applications
 call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
 &v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. When detection is not
-possible or fails, the value V4L2_DV_INVALID is returned.</para>
+returned in the preset field of &v4l2-dv-preset;. If the preset could not be
+detected because there was no signal, or the signal was unreliable, or the
+signal did not map to a supported preset, then the value V4L2_DV_INVALID is
+returned.</para>
   </refsect1>
 
   <refsect1>
diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt
new file mode 100644
index 00000000000..93c1fd7d063
--- /dev/null
+++ b/Documentation/apparmor.txt
@@ -0,0 +1,39 @@
+--- What is AppArmor? ---
+
+AppArmor is MAC style security extension for the Linux kernel.  It implements
+a task centered policy, with task "profiles" being created and loaded
+from user space.  Tasks on the system that do not have a profile defined for
+them run in an unconfined state which is equivalent to standard Linux DAC
+permissions.
+
+--- How to enable/disable ---
+
+set CONFIG_SECURITY_APPARMOR=y
+
+If AppArmor should be selected as the default security module then
+   set CONFIG_DEFAULT_SECURITY="apparmor"
+   and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+
+Build the kernel
+
+If AppArmor is not the default security module it can be enabled by passing
+security=apparmor on the kernel's command line.
+
+If AppArmor is the default security module it can be disabled by passing
+apparmor=0, security=XXXX (where XXX is valid security module), on the
+kernel's command line
+
+For AppArmor to enforce any restrictions beyond standard Linux DAC permissions
+policy must be loaded into the kernel from user space (see the Documentation
+and tools links).
+
+--- Documentation ---
+
+Documentation can be found on the wiki.
+
+--- Links ---
+
+Mailing List - apparmor@lists.ubuntu.com
+Wiki - http://apparmor.wiki.kernel.org/
+User space tools - https://launchpad.net/apparmor
+Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index eb0fae18ffb..771d48d3b33 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -33,7 +33,13 @@ ffff0000	ffff0fff	CPU vector page.
 
 fffe0000	fffeffff	XScale cache flush area.  This is used
 				in proc-xscale.S to flush the whole data
-				cache.  Free for other usage on non-XScale.
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
 
 fff00000	fffdffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 77fd9376e6d..7c15871c188 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
 system control coprocessor. Documentation from ARM can be found
 at http://infocenter.arm.com, search for "TCM Status Register"
 to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
 
 There is further a TCM region register (search for "TCM Region
 Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using
 the MMU, but notice that the TCM if often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
 
 TCM is used for a few things:
 
@@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
 
 Functions to go into itcm can be tagged like this:
 int __tcmfunc foo(int bar);
 
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
 Variables to go into dtcm can be tagged like this:
 int __tcmdata foo;
 
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 1b5aa10df84..1b5aa10df84 100644
--- a/Documentation/IO-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt
index a2db3528700..995baf379c0 100644
--- a/Documentation/credentials.txt
+++ b/Documentation/credentials.txt
@@ -417,6 +417,9 @@ reference on them using:
 This does all the RCU magic inside of it.  The caller must call put_cred() on
 the credentials so obtained when they're finished with.
 
+ [*] Note: The result of __task_cred() should not be passed directly to
+     get_cred() as this may race with commit_cred().
+
 There are a couple of convenience functions to access bits of another task's
 credentials, hiding the RCU magic from the caller:
 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 239cbdbf4d1..350959f4e41 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -26,7 +26,7 @@ use IO::Handle;
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
-		"af9015", "ngene");
+		"af9015", "ngene", "az6027");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -518,11 +518,11 @@ sub bluebird {
 sub af9015 {
 	my $sourcefile = "download.ashx?file=57";
 	my $url = "http://www.ite.com.tw/EN/Services/$sourcefile";
-	my $hash = "ff5b096ed47c080870eacdab2de33ad6";
+	my $hash = "e3f08935158038d385ad382442f4bb2d";
 	my $outfile = "dvb-usb-af9015.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
-	my $fwoffset = 0x22708;
-	my $fwlength = 18225;
+	my $fwoffset = 0x25690;
+	my $fwlength = 18725;
 	my ($chunklength, $buf, $rcount);
 
 	checkstandard();
@@ -567,6 +567,23 @@ sub ngene {
     "$file1, $file2";
 }
 
+sub az6027{
+    my $file = "AZ6027_Linux_Driver.tar.gz";
+    my $url = "http://linux.terratec.de/files/$file";
+    my $firmware = "dvb-usb-az6027-03.fw";
+
+    wgetfile($file, $url);
+
+    #untar
+    if( system("tar xzvf $file $firmware")){
+        die "failed to untar firmware";
+    }
+    if( system("rm $file")){
+        die ("unable to remove unnecessary files");
+    }
+
+    $firmware;
+}
 # ---------------------------------------------------------------
 # Utilities
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 79c53322376..0b875e8da96 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -6,6 +6,8 @@ Written by Doug Thompson <dougthompson@xmission.com>
 7 Dec 2005
 17 Jul 2007	Updated
 
+(c) Mauro Carvalho Chehab <mchehab@redhat.com>
+05 Aug 2009	Nehalem interface
 
 EDAC is maintained and written by:
 
@@ -717,3 +719,153 @@ unique drivers for their hardware systems.
 The 'test_device_edac' sample driver is located at the
 bluesmoke.sourceforge.net project site for EDAC.
 
+=======================================================================
+NEHALEM USAGE OF EDAC APIs
+
+This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
+Nehalem EDAC driver. They will likely be changed on future versions
+of the driver.
+
+Due to the way Nehalem exports Memory Controller data, some adjustments
+were done at i7core_edac driver. This chapter will cover those differences
+
+1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+   (QPI). At the driver, the term "socket" means one QPI. This is
+   associated with a physical CPU socket.
+
+   Each MC have 3 physical read channels, 3 physical write channels and
+   3 logic channels. The driver currenty sees it as just 3 channels.
+   Each channel can have up to 3 DIMMs.
+
+   The minimum known unity is DIMMs. There are no information about csrows.
+   As EDAC API maps the minimum unity is csrows, the driver sequencially
+   maps channel/dimm into different csrows.
+
+   For example, suposing the following layout:
+	Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	  dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
+        Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+   The driver will map it as:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+
+exports one
+   DIMM per csrow.
+
+   Each QPI is exported as a different memory controller.
+
+2) Nehalem MC has the hability to generate errors. The driver implements this
+   functionality via some error injection nodes:
+
+   For injecting a memory error, there are some sysfs nodes, under
+   /sys/devices/system/edac/mc/mc?/:
+
+   inject_addrmatch/*:
+      Controls the error injection mask register. It is possible to specify
+      several characteristics of the address to match an error code:
+         dimm = the affected dimm. Numbers are relative to a channel;
+         rank = the memory rank;
+         channel = the channel that will generate an error;
+         bank = the affected bank;
+         page = the page address;
+         column (or col) = the address column.
+      each of the above values can be set to "any" to match any valid value.
+
+      At driver init, all values are set to any.
+
+      For example, to generate an error at rank 1 of dimm 2, for any channel,
+      any bank, any page, any column:
+		echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+	To return to the default behaviour of matching any, you can do:
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+   inject_eccmask:
+       specifies what bits will have troubles,
+
+   inject_section:
+       specifies what ECC cache section will get the error:
+		3 for both
+		2 for the highest
+		1 for the lowest
+
+   inject_type:
+       specifies the type of error, being a combination of the following bits:
+		bit 0 - repeat
+		bit 1 - ecc
+		bit 2 - parity
+
+       inject_enable starts the error generation when something different
+       than 0 is written.
+
+   All inject vars can be read. root permission is needed for write.
+
+   Datasheet states that the error will only be generated after a write on an
+   address that matches inject_addrmatch. It seems, however, that reading will
+   also produce an error.
+
+   For example, the following code will generate an error for any write access
+   at socket 0, on any DIMM/address on channel 2:
+
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_type
+   echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask
+   echo 3 >/sys/devices/system/edac/mc/mc0/inject_section
+   echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable
+   dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null
+
+   For socket 1, it is needed to replace "mc0" by "mc1" at the above
+   commands.
+
+   The generated error message will look like:
+
+   EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error))
+
+3) Nehalem specific Corrected Error memory counters
+
+   Nehalem have some registers to count memory errors. The driver uses those
+   registers to report Corrected Errors on devices with Registered Dimms.
+
+   However, those counters don't work with Unregistered Dimms. As the chipset
+   offers some counters that also work with UDIMMS (but with a worse level of
+   granularity than the default ones), the driver exposes those registers for
+   UDIMM memories.
+
+   They can be read by looking at the contents of all_channel_counts/
+
+   $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2
+	0
+
+   What happens here is that errors on different csrows, but at the same
+   dimm number will increment the same counter.
+   So, in this memory mapping:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+   The hardware will increment udimm0 for an error at the first dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm1 for an error at the second dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm2 for an error at the third dimm at either
+	csrow0, csrow2  or csrow3;
+
+4) Standard error counters
+
+   The standard error counters are generated when an mcelog error is received
+   by the driver. Since, with udimm, this is counted by software, it is
+   possible that some errors could be lost. With rdimm's, they displays the
+   contents of the registers
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 92f021aac92..2f1e5b621d0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -368,16 +368,6 @@ Who:	Eric Paris <eparis@redhat.com>
 
 ----------------------------
 
-What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
-	exported interface anymore.
-When:	2.6.33
-Why:	cpu_policy_rwsem has a new cleaner definition making it local to
-	cpufreq core and contained inside cpufreq.c. Other dependent
-	drivers should not use it in order to safely avoid lockdep issues.
-Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
-----------------------------
-
 What:	sound-slot/service-* module aliases and related clutters in
 	sound/sound_core.c
 When:	August 2010
@@ -450,57 +440,6 @@ Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
 
-What:	usbvideo quickcam_messenger driver
-When:	2.6.35
-Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv06xx
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ov511 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/ov511.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	w9968cf v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/w9968cf*.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ovcamchip sensor framework
-When:	2.6.35
-Files:	drivers/media/video/ovcamchip/*
-Why:	Only used by obsoleted v4l1 drivers
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	stv680 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/stv680.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv0680
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	zc0301 v4l driver
-When:	2.6.35
-Files:	drivers/media/video/zc0301/*
-Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
-	supports 2 USB-ID's (because it only supports a limited set of
-	sensors) wich are also supported by the gspca_zc3xx driver
-	(which supports 53 USB-ID's in total)
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
 What:	sysfs-class-rfkill state file
 When:	Feb 2014
 Files:	net/rfkill/core.c
@@ -529,17 +468,6 @@ Who:	Jan Kiszka <jan.kiszka@web.de>
 
 ----------------------------
 
-What:	KVM memory aliases support
-When:	July 2010
-Why:	Memory aliasing support is used for speeding up guest vga access
-	through the vga windows.
-
-	Modern userspace no longer uses this feature, so it's just bitrotted
-	code and can be removed with no impact.
-Who:	Avi Kivity <avi@redhat.com>
-
-----------------------------
-
 What:	xtime, wall_to_monotonic
 When:	2.6.36+
 Files:	kernel/time/timekeeping.c include/linux/time.h
@@ -550,16 +478,6 @@ Who:	John Stultz <johnstul@us.ibm.com>
 
 ----------------------------
 
-What:	KVM kernel-allocated memory slots
-When:	July 2010
-Why:	Since 2.6.25, kvm supports user-allocated memory slots, which are
-	much more flexible than kernel-allocated slots.  All current userspace
-	supports the newer interface and this code can be removed with no
-	impact.
-Who:	Avi Kivity <avi@redhat.com>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
@@ -569,15 +487,6 @@ Who:	Avi Kivity <avi@redhat.com>
 
 ----------------------------
 
-What: 	"acpi=ht" boot option
-When:	2.6.35
-Why:	Useful in 2003, implementation is a hack.
-	Generally invoked by accident today.
-	Seen as doing more harm than good.
-Who:	Len Brown <len.brown@intel.com>
-
-----------------------------
-
 What:	iwlwifi 50XX module parameters
 When:	2.6.40
 Why:	The "..50" modules parameters were used to configure 5000 series and
@@ -647,3 +556,10 @@ Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 
 ----------------------------
 
+What:	The acpi_sleep=s4_nonvs command line option
+When:	2.6.37
+Files:	arch/x86/kernel/acpi/sleep.c
+Why:	superseded by acpi_sleep=nonvs
+Who:	Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index d8119e9d2d6..96d0df28bed 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,11 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.35 Inclusion in mainline as an experimental mount option
-	=> approximately 2-3 months to merge window
-	=> needs to be in xfs-dev tree in 4-6 weeks
-	=> code is nearing readiness for review
-
 2.6.37 Remove experimental tag from mount option
 	=> should be roughly 6 months after initial merge
 	=> enough time to:
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 9878f50d6ed..7bff3e4f35d 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -131,17 +131,6 @@ When mounting an XFS filesystem, the following options are accepted.
 	Don't check for double mounted file systems using the file system uuid.
 	This is useful to mount LVM snapshot volumes.
 
-  osyncisosync
-	Make O_SYNC writes implement true O_SYNC.  WITHOUT this option,
-	Linux XFS behaves as if an "osyncisdsync" option is used,
-	which will make writes to files opened with the O_SYNC flag set
-	behave as if the O_DSYNC flag had been used instead.
-	This can result in better performance without compromising
-	data safety.
-	However if this option is not in effect, timestamp updates from
-	O_SYNC writes can be lost if the system crashes.
-	If timestamp updates are critical, use the osyncisosync option.
-
   uquota/usrquota/uqnoenforce/quota
 	User disk quota accounting enabled, and limits (optionally)
 	enforced.  Refer to xfs_quota(8) for further details.
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535
index 0db3b4c74ad..acbc65a0809 100644
--- a/Documentation/i2c/busses/i2c-ali1535
+++ b/Documentation/i2c/busses/i2c-ali1535
@@ -6,12 +6,12 @@ Supported adapters:
 	http://www.ali.com.tw/eng/support/datasheet_request.php
 
 Authors:
-	Frodo Looijaard <frodol@dds.nl>, 
+	Frodo Looijaard <frodol@dds.nl>,
 	Philip Edelbrock <phil@netroedge.com>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
 	Dan Eaton <dan.eaton@rocketlogix.com>,
 	Stephen Rousset<stephen.rousset@rocketlogix.com>
-												
+
 Description
 -----------
 
diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563
index 99ad4b9bcc3..54691698d2d 100644
--- a/Documentation/i2c/busses/i2c-ali1563
+++ b/Documentation/i2c/busses/i2c-ali1563
@@ -18,7 +18,7 @@ For an overview of these chips see http://www.acerlabs.com
 The M1563 southbridge is deceptively similar to the M1533, with a few
 notable exceptions. One of those happens to be the fact they upgraded the
 i2c core to be SMBus 2.0 compliant, and happens to be almost identical to
-the i2c controller found in the Intel 801 south bridges. 
+the i2c controller found in the Intel 801 south bridges.
 
 Features
 --------
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3
index ff28d381beb..600da90b8f1 100644
--- a/Documentation/i2c/busses/i2c-ali15x3
+++ b/Documentation/i2c/busses/i2c-ali15x3
@@ -6,8 +6,8 @@ Supported adapters:
 	http://www.ali.com.tw/eng/support/datasheet_request.php
 
 Authors:
-	Frodo Looijaard <frodol@dds.nl>, 
-	Philip Edelbrock <phil@netroedge.com>, 
+	Frodo Looijaard <frodol@dds.nl>,
+	Philip Edelbrock <phil@netroedge.com>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>
 
 Module Parameters
@@ -40,10 +40,10 @@ M1541 and M1543C South Bridges.
 The M1543C is a South bridge for desktop systems.
 The M1541 is a South bridge for portable systems.
 They are part of the following ALI chipsets:
-   
- * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and 
+
+ * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
  		100MHz CPU Front Side bus
- * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz 
+ * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
  		CPU Front Side bus
    Some Aladdin V motherboards:
 	Asus P5A
@@ -77,7 +77,7 @@ output of lspci will show something similar to the following:
 ** then run lspci.
 ** If you see the 1533 and 5229 devices but NOT the 7101 device,
 ** then you must enable ACPI, the PMU, SMB, or something similar
-** in the BIOS. 
+** in the BIOS.
 ** The driver won't work if it can't find the M7101 device.
 
 The SMB controller is part of the M7101 device, which is an ACPI-compliant
@@ -87,8 +87,8 @@ The whole M7101 device has to be enabled for the SMB to work. You can't
 just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
 We make sure that the SMB is enabled. We leave the ACPI alone.
 
-Features 
--------- 
+Features
+--------
 
 This driver controls the SMB Host only. The SMB Slave
 controller on the M15X3 is not enabled. This driver does not use
diff --git a/Documentation/i2c/busses/i2c-pca-isa b/Documentation/i2c/busses/i2c-pca-isa
index 6fc8f4c27c3..b044e526548 100644
--- a/Documentation/i2c/busses/i2c-pca-isa
+++ b/Documentation/i2c/busses/i2c-pca-isa
@@ -1,10 +1,10 @@
 Kernel driver i2c-pca-isa
 
 Supported adapters:
-This driver supports ISA boards using the Philips PCA 9564 
-Parallel bus to I2C bus controller 
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
 
-Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems 
+Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
 
 Module Parameters
 -----------------
@@ -12,12 +12,12 @@ Module Parameters
 * base int
  I/O base address
 * irq int
- IRQ interrupt 
-* clock int 
+ IRQ interrupt
+* clock int
  Clock rate as described in table 1 of PCA9564 datasheet
 
 Description
 -----------
 
-This driver supports ISA boards using the Philips PCA 9564 
-Parallel bus to I2C bus controller 
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
diff --git a/Documentation/i2c/busses/i2c-sis5595 b/Documentation/i2c/busses/i2c-sis5595
index cc47db7d00a..ecd21fb49a8 100644
--- a/Documentation/i2c/busses/i2c-sis5595
+++ b/Documentation/i2c/busses/i2c-sis5595
@@ -1,41 +1,41 @@
 Kernel driver i2c-sis5595
 
-Authors: 
+Authors:
 	Frodo Looijaard <frodol@dds.nl>,
         Mark D. Studebaker <mdsxyz123@yahoo.com>,
-	Philip Edelbrock <phil@netroedge.com> 
+	Philip Edelbrock <phil@netroedge.com>
 
 Supported adapters:
   * Silicon Integrated Systems Corp. SiS5595 Southbridge
     Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
 
-Note: all have mfr. ID 0x1039. 
-
-   SUPPORTED            PCI ID           
-        5595            0008 
- 
-   Note: these chips contain a 0008 device which is incompatible with the 
-         5595. We recognize these by the presence of the listed 
-         "blacklist" PCI ID and refuse to load. 
- 
-   NOT SUPPORTED        PCI ID          BLACKLIST PCI ID         
-         540            0008            0540 
-         550            0008            0550 
-        5513            0008            5511 
-        5581            0008            5597 
-        5582            0008            5597 
-        5597            0008            5597 
-        5598            0008            5597/5598 
-         630            0008            0630 
-         645            0008            0645 
-         646            0008            0646 
-         648            0008            0648 
-         650            0008            0650 
-         651            0008            0651 
-         730            0008            0730 
-         735            0008            0735 
-         745            0008            0745 
-         746            0008            0746 
+Note: all have mfr. ID 0x1039.
+
+   SUPPORTED            PCI ID
+        5595            0008
+
+   Note: these chips contain a 0008 device which is incompatible with the
+         5595. We recognize these by the presence of the listed
+         "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED        PCI ID          BLACKLIST PCI ID
+         540            0008            0540
+         550            0008            0550
+        5513            0008            5511
+        5581            0008            5597
+        5582            0008            5597
+        5597            0008            5597
+        5598            0008            5597/5598
+         630            0008            0630
+         645            0008            0645
+         646            0008            0646
+         648            0008            0648
+         650            0008            0650
+         651            0008            0651
+         730            0008            0730
+         735            0008            0735
+         745            0008            0745
+         746            0008            0746
 
 Module Parameters
 -----------------
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 9aca6889f74..629ea2c356f 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -14,9 +14,9 @@ Module Parameters
 * force = [1|0] Forcibly enable the SIS630. DANGEROUS!
 		This can be interesting for chipsets not named
 		above to check if it works for you chipset, but DANGEROUS!
-		
-* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default, 
-			what your BIOS use). DANGEROUS! This should be a bit 
+
+* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
+			what your BIOS use). DANGEROUS! This should be a bit
 			faster, but freeze some systems (i.e. my Laptop).
 
 
@@ -44,6 +44,6 @@ Philip Edelbrock <phil@netroedge.com>
 - testing SiS730 support
 Mark M. Hoffman <mhoffman@lightlink.com>
 - bug fixes
- 
+
 To anyone else which I forgot here ;), thanks!
 
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index 200074f8136..e9890709c50 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,17 +1,17 @@
-The I2C protocol knows about two kinds of device addresses: normal 7 bit 
+The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
 address 0x10 (though a single device could respond to both of them). You
 select a 10 bit address by adding an extra byte after the address
 byte:
-  S Addr7 Rd/Wr ....  
+  S Addr7 Rd/Wr ....
 becomes
   S 11110 Addr10 Rd/Wr
 S is the start bit, Rd/Wr the read/write bit, and if you count the number
 of bits, you will see the there are 8 after the S bit for 7 bit addresses,
 and 16 after the S bit for 10 bit addresses.
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are 
+WARNING! The current 10 bit address support is EXPERIMENTAL. There are
 several places in the code that will cause SEVERE PROBLEMS with 10 bit
 addresses, even though there is some basic handling and hooks. Also,
 almost no supported adapter handles the 10 bit addresses correctly.
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index c0fc1c75fd8..bdcba154b83 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -6,31 +6,149 @@ Multi-touch (MT) Protocol
 Introduction
 ------------
 
-In order to utilize the full power of the new multi-touch devices, a way to
-report detailed finger data to user space is needed. This document
-describes the multi-touch (MT) protocol which allows kernel drivers to
-report details for an arbitrary number of fingers.
+In order to utilize the full power of the new multi-touch and multi-user
+devices, a way to report detailed data from multiple contacts, i.e.,
+objects in direct contact with the device surface, is needed.  This
+document describes the multi-touch (MT) protocol which allows kernel
+drivers to report details for an arbitrary number of contacts.
+
+The protocol is divided into two types, depending on the capabilities of the
+hardware. For devices handling anonymous contacts (type A), the protocol
+describes how to send the raw data for all contacts to the receiver. For
+devices capable of tracking identifiable contacts (type B), the protocol
+describes how to send updates for individual contacts via event slots.
+
+
+Protocol Usage
+--------------
+
+Contact details are sent sequentially as separate packets of ABS_MT
+events. Only the ABS_MT events are recognized as part of a contact
+packet. Since these events are ignored by current single-touch (ST)
+applications, the MT protocol can be implemented on top of the ST protocol
+in an existing driver.
+
+Drivers for type A devices separate contact packets by calling
+input_mt_sync() at the end of each packet. This generates a SYN_MT_REPORT
+event, which instructs the receiver to accept the data for the current
+contact and prepare to receive another.
+
+Drivers for type B devices separate contact packets by calling
+input_mt_slot(), with a slot as argument, at the beginning of each packet.
+This generates an ABS_MT_SLOT event, which instructs the receiver to
+prepare for updates of the given slot.
+
+All drivers mark the end of a multi-touch transfer by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new set
+of events/packets.
+
+The main difference between the stateless type A protocol and the stateful
+type B slot protocol lies in the usage of identifiable contacts to reduce
+the amount of data sent to userspace. The slot protocol requires the use of
+the ABS_MT_TRACKING_ID, either provided by the hardware or computed from
+the raw data [5].
+
+For type A devices, the kernel driver should generate an arbitrary
+enumeration of the full set of anonymous contacts currently on the
+surface. The order in which the packets appear in the event stream is not
+important.  Event filtering and finger tracking is left to user space [3].
+
+For type B devices, the kernel driver should associate a slot with each
+identified contact, and use that slot to propagate changes for the contact.
+Creation, replacement and destruction of contacts is achieved by modifying
+the ABS_MT_TRACKING_ID of the associated slot.  A non-negative tracking id
+is interpreted as a contact, and the value -1 denotes an unused slot.  A
+tracking id not previously present is considered new, and a tracking id no
+longer present is considered removed.  Since only changes are propagated,
+the full state of each initiated contact has to reside in the receiving
+end.  Upon receiving an MT event, one simply updates the appropriate
+attribute of the current slot.
+
+
+Protocol Example A
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type A device:
+
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   SYN_MT_REPORT
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
 
+The sequence after moving one of the contacts looks exactly the same; the
+raw data for all present contacts are sent between every synchronization
+with SYN_REPORT.
 
-Usage
------
+Here is the sequence after lifting the first contact:
+
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
+
+And here is the sequence after lifting the second contact:
+
+   SYN_MT_REPORT
+   SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-contact event reaching userland.
 
-Anonymous finger details are sent sequentially as separate packets of ABS
-events. Only the ABS_MT events are recognized as part of a finger
-packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. This instructs the
-receiver to accept the data for the current finger and prepare to receive
-another. The end of a multi-touch transfer is marked by calling the usual
-input_sync() function. This instructs the receiver to act upon events
-accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
-set of events/packets.
+
+Protocol Example B
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type B device:
+
+   ABS_MT_SLOT 0
+   ABS_MT_TRACKING_ID 45
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID 46
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_REPORT
+
+Here is the sequence after moving contact 45 in the x direction:
+
+   ABS_MT_SLOT 0
+   ABS_MT_POSITION_X x[0]
+   SYN_REPORT
+
+Here is the sequence after lifting the contact in slot 0:
+
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+The slot being modified is already 0, so the ABS_MT_SLOT is omitted.  The
+message removes the association of slot 0 with contact 45, thereby
+destroying contact 45 and freeing slot 0 to be reused for another contact.
+
+Finally, here is the sequence after lifting the second contact:
+
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+
+Event Usage
+-----------
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
 minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
-allows for multiple fingers to be tracked.  If the device supports it, the
+allows for multiple contacts to be tracked.  If the device supports it, the
 ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching finger, respectively.
+of the contact area and approaching contact, respectively.
 
 The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
 looking through a window at someone gently holding a finger against the
@@ -41,56 +159,26 @@ ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
 ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
 against the glass. The inner region will increase, and in general, the
 ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the finger pressure. For pressure-based devices,
+unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
 instead.
 
-In addition to the MAJOR parameters, the oval shape of the finger can be
+In addition to the MAJOR parameters, the oval shape of the contact can be
 described by adding the MINOR parameters, such that MAJOR and MINOR are the
 major and minor axis of an ellipse. Finally, the orientation of the oval
 shape can be describe with the ORIENTATION parameter.
 
 The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-finger or a pen or something else.  Devices with more granular information
+contact or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
 that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report finger tracking from hardware [5].
+report contact tracking from hardware [5].
 
-Here is what a minimal event sequence for a two-finger touch would look
-like:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-Here is the sequence after lifting one of the fingers:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-And here is the sequence after lifting the remaining finger:
-
-   SYN_MT_REPORT
-   SYN_REPORT
-
-If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
-ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
-last SYN_REPORT will be dropped by the input core, resulting in no
-zero-finger event reaching userland.
 
 Event Semantics
 ---------------
 
-The word "contact" is used to describe a tool which is in direct contact
-with the surface. A finger, a pen or a rubber all classify as contacts.
-
 ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
@@ -157,15 +245,16 @@ MT_TOOL_PEN [2].
 ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level trackingID [5]. Most kernel drivers will not have blob
-capability, and can safely omit the event.
+contact. This is a low-level anonymous grouping for type A devices, and
+should not be confused with the high-level trackingID [5]. Most type A
+devices do not have blob capability, so drivers can safely omit this event.
 
 ABS_MT_TRACKING_ID
 
 The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. There are currently only a few devices that support it, so this event
-should normally be omitted.
+[5]. This event is mandatory for type B devices. The value range of the
+TRACKING_ID should be large enough to ensure unique identification of a
+contact maintained over an extended period of time.
 
 
 Event Computation
@@ -192,20 +281,11 @@ finger along the X axis (1).
 Finger Tracking
 ---------------
 
-The kernel driver should generate an arbitrary enumeration of the set of
-anonymous contacts currently on the surface. The order in which the packets
-appear in the event stream is not important.
-
 The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the trackingID stays the same and
-unique until the contact vanishes (when the finger leaves the surface). The
-problem of assigning a set of anonymous fingers to a set of identified
-fingers is a euclidian bipartite matching problem at each event update, and
-relies on a sufficiently rapid update rate.
-
-There are a few devices that support trackingID in hardware. User space can
-make use of these native identifiers to reduce bandwidth and cpu usage.
+initiated contact on the surface, is a Euclidian Bipartite Matching
+problem.  At each event synchronization, the set of actual contacts is
+matched to the set of contacts from the previous synchronization. A full
+implementation can be found in [3].
 
 
 Gestures
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 6f8c1cabbc5..634c625da8c 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -65,7 +65,7 @@ CROSS_COMPILE
 Specify an optional fixed part of the binutils filename.
 CROSS_COMPILE can be a part of the filename or the full path.
 
-CROSS_COMPILE is also used for ccache is some setups.
+CROSS_COMPILE is also used for ccache in some setups.
 
 CF
 --------------------------------------------------
@@ -162,3 +162,7 @@ For tags/TAGS/cscope targets, you can specify more than one arch
 to be included in the databases, separated by blank space. E.g.:
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags
+
+To get all available archs you can also specify all. E.g.:
+
+    $ make ALLSOURCE_ARCHS=all tags
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cee62515ffa..d9239d5f3ad 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -93,6 +93,7 @@ parameter is applicable:
 			Documentation/scsi/.
 	SECURITY Different security models are enabled.
 	SELINUX SELinux support is enabled.
+	APPARMOR AppArmor support is enabled.
 	SERIAL	Serial support is enabled.
 	SH	SuperH architecture is enabled.
 	SMP	The kernel is an SMP kernel.
@@ -254,8 +255,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			control method, with respect to putting devices into
 			low power states, to be enforced (the ACPI 2.0 ordering
 			of _PTS is used by default).
-			s4_nonvs prevents the kernel from saving/restoring the
-			ACPI NVS memory during hibernation.
+			nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during suspend/hibernation and resume.
 			sci_force_enable causes the kernel to set SCI_EN directly
 			on resume from S1/S3 (which is against the ACPI spec,
 			but some broken systems don't work without it).
@@ -1265,7 +1266,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
-	lmb=debug	[KNL] Enable lmb debug messages.
+	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/blockdev/ramdisk.txt.
@@ -2047,7 +2048,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.
@@ -2309,6 +2312,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
+	apparmor=	[APPARMOR] Disable or enable AppArmor at boot time
+			Format: { "0" | "1" }
+			See security/apparmor/Kconfig help text
+			0 -- disable.
+			1 -- enable.
+			Default value is set via kernel config option.
+
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index a237518e51b..5f5b64982b1 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -126,6 +126,10 @@ user fills in the size of the indices array in nmsrs, and in return
 kvm adjusts nmsrs to reflect the actual number of msrs and fills in
 the indices array with their numbers.
 
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
 4.4 KVM_CHECK_EXTENSION
 
 Capability: basic
@@ -160,29 +164,7 @@ Type: vm ioctl
 Parameters: struct kvm_memory_region (in)
 Returns: 0 on success, -1 on error
 
-struct kvm_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-};
-
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES  1UL
-
-This ioctl allows the user to create or modify a guest physical memory
-slot.  When changing an existing slot, it may be moved in the guest
-physical memory space, or its flags may be modified.  It may not be
-resized.  Slots may not overlap.
-
-The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
-instructs kvm to keep track of writes to memory within the slot.  See
-the KVM_GET_DIRTY_LOG ioctl.
-
-It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead
-of this API, if available.  This newer API allows placing guest memory
-at specified locations in the host address space, yielding better
-control and easy access.
+This ioctl is obsolete and has been removed.
 
 4.6 KVM_CREATE_VCPU
 
@@ -226,17 +208,7 @@ Type: vm ioctl
 Parameters: struct kvm_memory_alias (in)
 Returns: 0 (success), -1 (error)
 
-struct kvm_memory_alias {
-	__u32 slot;  /* this has a different namespace than memory slots */
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size;
-	__u64 target_phys_addr;
-};
-
-Defines a guest physical address space region as an alias to another
-region.  Useful for aliased address, for example the VGA low memory
-window. Should not be used with userspace memory.
+This ioctl is obsolete and has been removed.
 
 4.9 KVM_RUN
 
@@ -892,6 +864,174 @@ arguments.
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
 
+4.39 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space.  The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address.  The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts.  This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.40 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP).  Values are the same
+as the vcpu id in KVM_CREATE_VCPU.  If this ioctl is not called, the default
+is vcpu 0.
+
+4.41 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+	__u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+4.42 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+	__u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+4.43 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+4.44 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+4.45 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC    2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT  4
+
+struct kvm_cpuid_entry2 {
+	__u32 function;
+	__u32 index;
+	__u32 flags;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm.  Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'.  If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned.  If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned.  If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out.  The fields in each entry
+are defined as follows:
+
+  function: the eax value used to obtain the entry
+  index: the ecx value used to obtain the entry (for entries that are
+         affected by ecx)
+  flags: an OR of zero or more of the following:
+        KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+           if the index field is valid
+        KVM_CPUID_FLAG_STATEFUL_FUNC:
+           if cpuid for this function returns different values for successive
+           invocations; there will be several entries with the same function,
+           all with this flag set
+        KVM_CPUID_FLAG_STATE_READ_NEXT:
+           for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+           the first entry to be read by a cpu
+   eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+         this function/index combination
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/kvm/mmu.txt b/Documentation/kvm/mmu.txt
index aaed6ab9d7a..142cc513665 100644
--- a/Documentation/kvm/mmu.txt
+++ b/Documentation/kvm/mmu.txt
@@ -77,10 +77,10 @@ Memory
 
 Guest memory (gpa) is part of the user address space of the process that is
 using kvm.  Userspace defines the translation between guest addresses and user
-addresses (gpa->hva); note that two gpas may alias to the same gva, but not
+addresses (gpa->hva); note that two gpas may alias to the same hva, but not
 vice versa.
 
-These gvas may be backed using any method available to the host: anonymous
+These hvas may be backed using any method available to the host: anonymous
 memory, file backed memory, and device memory.  Memory might be paged by the
 host at any time.
 
@@ -161,7 +161,7 @@ Shadow pages contain the following information:
   role.cr4_pae:
     Contains the value of cr4.pae for which the page is valid (e.g. whether
     32-bit or 64-bit gptes are in use).
-  role.cr4_nxe:
+  role.nxe:
     Contains the value of efer.nxe for which the page is valid.
   role.cr0_wp:
     Contains the value of cr0.wp for which the page is valid.
@@ -180,7 +180,9 @@ Shadow pages contain the following information:
     guest pages as leaves.
   gfns:
     An array of 512 guest frame numbers, one for each present pte.  Used to
-    perform a reverse map from a pte to a gfn.
+    perform a reverse map from a pte to a gfn. When role.direct is set, any
+    element of this array can be calculated from the gfn field when used, in
+    this case, the array of gfns is not allocated. See role.direct and gfn.
   slot_bitmap:
     A bitmap containing one bit per memory slot.  If the page contains a pte
     mapping a page from memory slot n, then bit n of slot_bitmap will be set
@@ -296,6 +298,48 @@ Host translation updates:
   - look up affected sptes through reverse map
   - drop (or update) translations
 
+Emulating cr0.wp
+================
+
+If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
+works for the guest kernel, not guest guest userspace.  When the guest
+cr0.wp=1, this does not present a problem.  However when the guest cr0.wp=0,
+we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
+semantics require allowing any guest kernel access plus user read access).
+
+We handle this by mapping the permissions to two possible sptes, depending
+on fault type:
+
+- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
+  disallows user access)
+- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
+  write access)
+
+(user write faults generate a #PF)
+
+Large pages
+===========
+
+The mmu supports all combinations of large and small guest and host pages.
+Supported page sizes include 4k, 2M, 4M, and 1G.  4M pages are treated as
+two separate 2M pages, on both guest and host, since the mmu always uses PAE
+paging.
+
+To instantiate a large spte, four constraints must be satisfied:
+
+- the spte must point to a large host page
+- the guest pte must be a large pte of at least equivalent size (if tdp is
+  enabled, there is no guest pte and this condition is satisified)
+- if the spte will be writeable, the large page frame may not overlap any
+  write-protected pages
+- the guest page must be wholly contained by a single memory slot
+
+To check the last two conditions, the mmu maintains a ->write_count set of
+arrays for each memory slot and large page size.  Every write protected page
+causes its write_count to be incremented, thus preventing instantiation of
+a large spte.  The frames at the end of an unaligned memory slot have
+artificically inflated ->write_counts so they can never be instantiated.
+
 Further reading
 ===============
 
diff --git a/Documentation/kvm/msr.txt b/Documentation/kvm/msr.txt
new file mode 100644
index 00000000000..8ddcfe84c09
--- /dev/null
+++ b/Documentation/kvm/msr.txt
@@ -0,0 +1,153 @@
+KVM-specific MSRs.
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+KVM makes use of some custom MSRs to service some requests.
+At present, this facility is only used by kvmclock.
+
+Custom MSRs have a range reserved for them, that goes from
+0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
+but they are deprecated and their use is discouraged.
+
+Custom MSR list
+--------
+
+The current supported Custom MSR list is:
+
+MSR_KVM_WALL_CLOCK_NEW:   0x4b564d00
+
+	data: 4-byte alignment physical address of a memory area which must be
+	in guest RAM. This memory is expected to hold a copy of the following
+	structure:
+
+	struct pvclock_wall_clock {
+		u32   version;
+		u32   sec;
+		u32   nsec;
+	} __attribute__((__packed__));
+
+	whose data will be filled in by the hypervisor. The hypervisor is only
+	guaranteed to update this data at the moment of MSR write.
+	Users that want to reliably query this information more than once have
+	to write more than once to this MSR. Fields have the following meanings:
+
+		version: guest has to check version before and after grabbing
+		time information and check that they are both equal and even.
+		An odd version indicates an in-progress update.
+
+		sec: number of seconds for wallclock.
+
+		nsec: number of nanoseconds for wallclock.
+
+	Note that although MSRs are per-CPU entities, the effect of this
+	particular MSR is global.
+
+	Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+	leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME_NEW:  0x4b564d01
+
+	data: 4-byte aligned physical address of a memory area which must be in
+	guest RAM, plus an enable bit in bit 0. This memory is expected to hold
+	a copy of the following structure:
+
+	struct pvclock_vcpu_time_info {
+		u32   version;
+		u32   pad0;
+		u64   tsc_timestamp;
+		u64   system_time;
+		u32   tsc_to_system_mul;
+		s8    tsc_shift;
+		u8    flags;
+		u8    pad[2];
+	} __attribute__((__packed__)); /* 32 bytes */
+
+	whose data will be filled in by the hypervisor periodically. Only one
+	write, or registration, is needed for each VCPU. The interval between
+	updates of this structure is arbitrary and implementation-dependent.
+	The hypervisor may update this structure at any time it sees fit until
+	anything with bit0 == 0 is written to it.
+
+	Fields have the following meanings:
+
+		version: guest has to check version before and after grabbing
+		time information and check that they are both equal and even.
+		An odd version indicates an in-progress update.
+
+		tsc_timestamp: the tsc value at the current VCPU at the time
+		of the update of this structure. Guests can subtract this value
+		from current tsc to derive a notion of elapsed time since the
+		structure update.
+
+		system_time: a host notion of monotonic time, including sleep
+		time at the time this structure was last updated. Unit is
+		nanoseconds.
+
+		tsc_to_system_mul: a function of the tsc frequency. One has
+		to multiply any tsc-related quantity by this value to get
+		a value in nanoseconds, besides dividing by 2^tsc_shift
+
+		tsc_shift: cycle to nanosecond divider, as a power of two, to
+		allow for shift rights. One has to shift right any tsc-related
+		quantity by this value to get a value in nanoseconds, besides
+		multiplying by tsc_to_system_mul.
+
+		With this information, guests can derive per-CPU time by
+		doing:
+
+			time = (current_tsc - tsc_timestamp)
+			time = (time * tsc_to_system_mul) >> tsc_shift
+			time = time + system_time
+
+		flags: bits in this field indicate extended capabilities
+		coordinated between the guest and the hypervisor. Availability
+		of specific flags has to be checked in 0x40000001 cpuid leaf.
+		Current flags are:
+
+		 flag bit   | cpuid bit    | meaning
+		-------------------------------------------------------------
+			    |	           | time measures taken across
+		     0      |	   24      | multiple cpus are guaranteed to
+			    |		   | be monotonic
+		-------------------------------------------------------------
+
+	Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+	leaf prior to usage.
+
+
+MSR_KVM_WALL_CLOCK:  0x11
+
+	data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
+
+	This MSR falls outside the reserved KVM range and may be removed in the
+	future. Its usage is deprecated.
+
+	Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+	leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME: 0x12
+
+	data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
+
+	This MSR falls outside the reserved KVM range and may be removed in the
+	future. Its usage is deprecated.
+
+	Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+	leaf prior to usage.
+
+	The suggested algorithm for detecting kvmclock presence is then:
+
+		if (!kvm_para_available())    /* refer to cpuid.txt */
+			return NON_PRESENT;
+
+		flags = cpuid_eax(0x40000001);
+		if (flags & 3) {
+			msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+			msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+			return PRESENT;
+		} else if (flags & 0) {
+			msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+			msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+			return PRESENT;
+		} else
+			return NON_PRESENT;
diff --git a/Documentation/kvm/review-checklist.txt b/Documentation/kvm/review-checklist.txt
new file mode 100644
index 00000000000..730475ae1b8
--- /dev/null
+++ b/Documentation/kvm/review-checklist.txt
@@ -0,0 +1,38 @@
+Review checklist for kvm patches
+================================
+
+1.  The patch must follow Documentation/CodingStyle and
+    Documentation/SubmittingPatches.
+
+2.  Patches should be against kvm.git master branch.
+
+3.  If the patch introduces or modifies a new userspace API:
+    - the API must be documented in Documentation/kvm/api.txt
+    - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4.  New state must include support for save/restore.
+
+5.  New features must default to off (userspace should explicitly request them).
+    Performance improvements can and should default to on.
+
+6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7.  Emulator changes should be accompanied by unit tests for qemu-kvm.git
+    kvm/test directory.
+
+8.  Changes should be vendor neutral when possible.  Changes to common code
+    are better than duplicating changes to vendor code.
+
+9.  Similarly, prefer changes to arch independent code than to arch dependent
+    code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+    (all variables and sizes naturally aligned on 64-bit; use specific types
+    only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+    or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+    host/guest memory must be unshared to prevent the host from writing to
+    guest memory that the guest has not reserved for this purpose.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index fc15538d8b4..f6f80257add 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -960,70 +960,21 @@ Sysfs notes:
 	subsystem, and follow all of the hwmon guidelines at
 	Documentation/hwmon.
 
+EXPERIMENTAL: Embedded controller register dump
+-----------------------------------------------
 
-EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
-------------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature dumps the values of 256 embedded controller
-registers. Values which have changed since the last time the registers
-were dumped are marked with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00 *85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03 *bc *02 *bc
-EC 0x60: *02 *bc *02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40 *24 *26 *2c *27 *20  80 *1f  80
-EC 0x80:  00  00  00  06 *37 *0e  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0: *ff  09  ff  09  ff  ff *64  00 *00 *00 *a2  41 *ff *ff *e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-This feature can be used to determine the register holding the fan
-speed on some models. To do that, do the following:
+This feature is not included in the thinkpad driver anymore.
+Instead the EC can be accessed through /sys/kernel/debug/ec with
+a userspace tool which can be found here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec
 
+Use it to determine the register holding the fan
+speed on some models. To do that, do the following:
 	- make sure the battery is fully charged
 	- make sure the fan is running
-	- run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
-
-The first step makes sure various charging-related values don't
-vary. The second ensures that the fan-related values do vary, since
-the fan speed fluctuates a bit. The third will (hopefully) mark the
-fan register with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00  85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03  bc  02  bc
-EC 0x60:  02  bc  02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40  24  27  2c  27  21  80  1f  80
-EC 0x80:  00  00  00  06 *be  0d  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0:  ff  09  ff  09  ff  ff  64  00  00  00  a2  41  ff  ff  e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-Another set of values that varies often is the temperature
+	- use above mentioned tool to read out the EC
+
+Often fan and temperature values vary between
 readings. Since temperatures don't change vary fast, you can take
 several quick dumps to eliminate them.
 
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index aa60d1f627e..c91ccc0720f 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -66,14 +66,14 @@ of advantages of mutexes:
 
     c0377ccb <mutex_lock>:
     c0377ccb:       f0 ff 08                lock decl (%eax)
-    c0377cce:       78 0e                   js     c0377cde <.text.lock.mutex>
+    c0377cce:       78 0e                   js     c0377cde <.text..lock.mutex>
     c0377cd0:       c3                      ret
 
    the unlocking fastpath is equally tight:
 
     c0377cd1 <mutex_unlock>:
     c0377cd1:       f0 ff 00                lock incl (%eax)
-    c0377cd4:       7e 0f                   jle    c0377ce5 <.text.lock.mutex+0x7>
+    c0377cd4:       7e 0f                   jle    c0377ce5 <.text..lock.mutex+0x7>
     c0377cd6:       c3                      ret
 
  - 'struct mutex' semantics are well-defined and are enforced if
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
index c85625f4ab2..73f75f8a87d 100644
--- a/Documentation/timers/Makefile
+++ b/Documentation/timers/Makefile
@@ -2,7 +2,7 @@
 obj- := dummy.o
 
 # List of programs to build
-hostprogs-y := hpet_example
+hostprogs-$(CONFIG_X86) := hpet_example
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
index b3a232cae7f..200a2d37cbc 100644
--- a/Documentation/tomoyo.txt
+++ b/Documentation/tomoyo.txt
@@ -3,8 +3,8 @@
 TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
 
 LiveCD-based tutorials are available at
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/
+http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ .
 Though these tutorials use non-LSM version of TOMOYO, they are useful for you
 to know what TOMOYO is.
 
@@ -13,12 +13,12 @@ to know what TOMOYO is.
 Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
 kernel's command line.
 
-Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+Please see http://tomoyo.sourceforge.jp/2.3/ for details.
 
 --- Where is documentation? ---
 
 User <-> Kernel interface documentation is available at
-http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+http://tomoyo.sourceforge.jp/2.3/policy-reference.html .
 
 Materials we prepared for seminars and symposiums are available at
 http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
@@ -50,6 +50,6 @@ multiple LSM modules at the same time. We feel sorry that you have to give up
 SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
 
 We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
-version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ .
 LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
 to port non-LSM version's functionalities to LSM versions.
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 16ca030e118..87c46347bd6 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -17,9 +17,9 @@
  16 -> DVBWorld DVB-S2 2005                                [0001:2005]
  17 -> NetUP Dual DVB-S2 CI                                [1b55:2a2c]
  18 -> Hauppauge WinTV-HVR1270                             [0070:2211]
- 19 -> Hauppauge WinTV-HVR1275                             [0070:2215]
- 20 -> Hauppauge WinTV-HVR1255                             [0070:2251]
- 21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
+ 19 -> Hauppauge WinTV-HVR1275                             [0070:2215,0070:221d,0070:22f2]
+ 20 -> Hauppauge WinTV-HVR1255                             [0070:2251,0070:2259,0070:22f1]
+ 21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
  24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 3a623aaeae5..5c568757c30 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -72,3 +72,4 @@
  73 -> Reddo DVB-C USB TV Box                   (em2870)
  74 -> Actionmaster/LinXcel/Digitus VC211A      (em2800)
  75 -> Dikom DK300                              (em2882)
+ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC)     (em2870)        [1b80:a340]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 070f2576707..4000c29fcfb 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -176,5 +176,7 @@
 175 -> Leadtek Winfast DTV1000S                 [107d:6655]
 176 -> Beholder BeholdTV 505 RDS                [0000:5051]
 177 -> Hawell HW-404M7
-179 -> Beholder BeholdTV H7			[5ace:7190]
-180 -> Beholder BeholdTV A7			[5ace:7090]
+178 -> Beholder BeholdTV H7                     [5ace:7190]
+179 -> Beholder BeholdTV A7                     [5ace:7090]
+180 -> Avermedia PCI M733A                      [1461:4155,1461:4255]
+181 -> TechoTrend TT-budget T-3000              [13c2:2804]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 9b2e0dd6017..e67c1db9685 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -82,3 +82,4 @@ tuner=81 - Partsnic (Daewoo) PTI-5NF05
 tuner=82 - Philips CU1216L
 tuner=83 - NXP TDA18271
 tuner=84 - Sony BTF-Pxn01Z
+tuner=85 - Philips FQ1236 MK5
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 8f3f5d33327..56ba7bba716 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -29,8 +29,12 @@ zc3xx		041e:4029	Creative WebCam Vista Pro
 zc3xx		041e:4034	Creative Instant P0620
 zc3xx		041e:4035	Creative Instant P0620D
 zc3xx		041e:4036	Creative Live !
+sq930x		041e:4038	Creative Joy-IT
 zc3xx		041e:403a	Creative Nx Pro 2
 spca561		041e:403b	Creative Webcam Vista (VF0010)
+sq930x		041e:403c	Creative Live! Ultra
+sq930x		041e:403d	Creative Live! Ultra for Notebooks
+sq930x		041e:4041	Creative Live! Motion
 zc3xx		041e:4051	Creative Live!Cam Notebook Pro (VF0250)
 ov519		041e:4052	Creative Live! VISTA IM
 zc3xx		041e:4053	Creative Live!Cam Video IM
@@ -138,6 +142,7 @@ finepix		04cb:013d	Fujifilm FinePix unknown model
 finepix		04cb:013f	Fujifilm FinePix F420
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
+spca1528	04fc:1528	Sunplus MD80 clone
 sunplus		04fc:500c	Sunplus CA500C
 sunplus		04fc:504a	Aiptek Mini PenCam 1.3
 sunplus		04fc:504b	Maxell MaxPocket LE 1.3
@@ -253,6 +258,7 @@ pac7302		093a:2620	Apollo AC-905
 pac7302		093a:2621	PAC731x
 pac7302		093a:2622	Genius Eye 312
 pac7302		093a:2624	PAC7302
+pac7302		093a:2625	Genius iSlim 310
 pac7302		093a:2626	Labtec 2200
 pac7302		093a:2628	Genius iLook 300
 pac7302		093a:2629	Genious iSlim 300
@@ -290,6 +296,7 @@ sonixb		0c45:602e	Genius VideoCam Messenger
 sonixj		0c45:6040	Speed NVC 350K
 sonixj		0c45:607c	Sonix sn9c102p Hv7131R
 sonixj		0c45:60c0	Sangha Sn535
+sonixj		0c45:60ce	USB-PC-Camera-168 (TALK-5067)
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
@@ -361,6 +368,8 @@ sq905c		2770:9052	Disney pix micro 2 (VGA)
 sq905c		2770:905c	All 11 known cameras with this ID
 sq905		2770:9120	All 24 known cameras with this ID
 sq905c		2770:913d	All 4 known cameras with this ID
+sq930x		2770:930b	Sweex Motion Tracking / I-Tec iCam Tracer
+sq930x		2770:930c	Trust WB-3500T / NSG Robbie 2.0
 spca500		2899:012c	Toptro Industrial
 ov519		8020:ef04	ov519
 spca508		8086:0110	Intel Easy PC Camera
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 41c95cc1dc1..17ddd822b45 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -125,6 +125,11 @@ ibmasr:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 indydog:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
diff --git a/MAINTAINERS b/MAINTAINERS
index b04b97fe321..7c3b67c34e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -894,11 +894,13 @@ S:	Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-s5p/
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1146,7 +1148,7 @@ F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1158,18 +1160,18 @@ F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
-L:	kernel@avr32linux.org
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
@@ -1579,7 +1581,7 @@ F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -1729,7 +1731,7 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-M:	Andy Walls <awalls@radix.net>
+M:	Andy Walls <awalls@md.metrocast.net>
 L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2114,11 +2116,20 @@ F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7CORE
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7core_edac.c
+F:	drivers/edac/edac_mce.c
+F:	include/linux/edac_mce.h
+
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvind@jetztechnologies.com>
@@ -2892,6 +2903,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -3161,7 +3179,7 @@ F:	Documentation/hwmon/it87
 F:	drivers/hwmon/it87.c
 
 IVTV VIDEO4LINUX DRIVER
-M:	Andy Walls <awalls@radix.net>
+M:	Andy Walls <awalls@md.metrocast.net>
 L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -3238,7 +3256,7 @@ L:	autofs@linux.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
-KERNEL BUILD
+KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
 M:	Michal Marek <mmarek@suse.cz>
 T:	git git://repo.or.cz/linux-kbuild.git for-next
 T:	git git://repo.or.cz/linux-kbuild.git for-linus
@@ -3247,6 +3265,9 @@ S:	Maintained
 F:	Documentation/kbuild/
 F:	Makefile
 F:	scripts/Makefile.*
+F:	scripts/basic/
+F:	scripts/mk*
+F:	scripts/package/
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
@@ -3375,7 +3396,7 @@ KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
-M:	Masami Hiramatsu <mhiramat@redhat.com>
+M:	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -3496,9 +3517,8 @@ F:	arch/powerpc/platforms/83xx/
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
 M:	Olof Johansson <olof@lixom.net>
-W:	http://www.pasemi.com/
 L:	linuxppc-dev@ozlabs.org
-S:	Supported
+S:	Maintained
 F:	arch/powerpc/platforms/pasemi/
 F:	drivers/*/*pasemi*
 F:	drivers/*/*/*pasemi*
@@ -4211,6 +4231,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	devicetree-discuss@lists.ozlabs.org
 W:	http://fdt.secretlab.ca
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
@@ -4624,6 +4645,12 @@ M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
+QLOGIC QLA1280 SCSI DRIVER
+M:	Michael Reed <mdr@sgi.com>
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/qla1280.[ch]
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5039,6 +5066,14 @@ S:	Supported
 F:	include/linux/selinux*
 F:	security/selinux/
 
+APPARMOR SECURITY MODULE
+M:	John Johansen <john.johansen@canonical.com>
+L:	apparmor@lists.ubuntu.com (subscribers-only, general discussion)
+W:	apparmor.wiki.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
+S:	Supported
+F:	security/apparmor/
+
 SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
@@ -5314,6 +5349,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
+F:	drivers/sbus
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
@@ -5381,6 +5417,7 @@ M:	David Brownell <dbrownell@users.sourceforge.net>
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/
@@ -5581,7 +5618,7 @@ L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and us
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
 W:	http://tomoyo.sourceforge.jp/
-T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/
+T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.3.x/tomoyo-lsm/patches/
 S:	Maintained
 F:	security/tomoyo/
 
@@ -6218,6 +6255,8 @@ F:	drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
+L:	linux-watchdog@vger.kernel.org
+W:	http://www.linux-watchdog.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
diff --git a/Makefile b/Makefile
index 6e39ec701cb..141da26fda4 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -183,11 +183,14 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 # CROSS_COMPILE can be set on the command line
 # make CROSS_COMPILE=ia64-linux-
 # Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 export KBUILD_BUILDHOST := $(SUBARCH)
 ARCH		?= $(SUBARCH)
 CROSS_COMPILE	?=
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
 
 # Architecture as present in compile.h
 UTS_MACHINE 	:= $(ARCH)
@@ -576,9 +579,6 @@ KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
-# revert to pre-gcc-4.4 behaviour of .eh_frame
-KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
-
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
@@ -882,73 +882,11 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
 PHONY += $(vmlinux-dirs)
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
-ifdef CONFIG_MODULES
-	$(Q)$(MAKE) $(modbuiltin)=$@
-endif
-
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-#	$(KERNELVERSION)
-#	  $(VERSION)			eg, 2
-#	  $(PATCHLEVEL)			eg, 6
-#	  $(SUBLEVEL)			eg, 18
-#	  $(EXTRAVERSION)		eg, -rc6
-#	$(localver-full)
-#	  $(localver)
-#	    localversion*		(files without backups, containing '~')
-#	    $(CONFIG_LOCALVERSION)	(from kernel config setting)
-#	  $(localver-auto)		(only if CONFIG_LOCALVERSION_AUTO is set)
-#	    ./scripts/setlocalversion	(SCM tag, if one exists)
-#	    $(LOCALVERSION)		(from make command line if provided)
-#
-#  Note how the final $(localver-auto) string is included *only* if the
-# kernel config option CONFIG_LOCALVERSION_AUTO is selected.  Also, at the
-# moment, only git is supported but other SCMs can edit the script
-# scripts/setlocalversion and add the appropriate checks as needed.
-
-pattern = ".*/localversion[^~]*"
-string  = $(shell cat /dev/null \
-	   `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
-			      $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
-# and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determined by the SCM used.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifdef CONFIG_LOCALVERSION_AUTO
-
-ifeq ($(wildcard .scmversion),)
-        _localver-auto = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
-else
-        _localver-auto = $(shell cat .scmversion 2> /dev/null)
-endif
-
-	localver-auto  = $(LOCALVERSION)$(_localver-auto)
-endif
-
-localver-full = $(localver)$(localver-auto)
 
 # Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
 include/config/kernel.release: include/config/auto.conf FORCE
 	$(Q)rm -f $@
-	$(Q)echo $(kernelrelease) > $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
 
 
 # Things we need to do before we recursively start building the kernel
@@ -1087,13 +1025,18 @@ all: modules
 #	using awk while concatenating to the final file.
 
 PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
 	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
-	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin
 	@$(kecho) '  Building modules, stage 2.';
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
 
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
 
 # Target to prepare building external modules
 PHONY += modules_prepare
@@ -1247,7 +1190,9 @@ help:
 	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
 	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
 	@echo  '  dir/            - Build all files in dir and below'
-	@echo  '  dir/file.[ois]  - Build specified target only'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
 	@echo  '  dir/file.ko     - Build module including final link'
 	@echo  '  modules_prepare - Set up for building external modules'
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 1dce24bc455..adfab8a21df 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -410,7 +410,7 @@ static inline unsigned long __arch_hweight64(unsigned long w)
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 7739a62440a..5a62fb46ef2 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support
diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
deleted file mode 100644
index 342b56d24c2..00000000000
--- a/arch/alpha/kernel/ns87312.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 00000000000..27dcbff8561
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 00000000000..25e16956fe3
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index a5fffc882c7..738fc824e2e 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -53,7 +53,6 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index d4327e461c2..85b4aea01ef 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1f254bd6c93..e39caa8b0c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,6 +10,7 @@ config ARM
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -24,6 +25,7 @@ config ARM
 	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -55,7 +57,7 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	depends on GENERIC_CLOCKEVENTS
-	default y if SMP && !LOCAL_TIMERS
+	default y if SMP
 
 config HAVE_TCM
 	bool
@@ -301,6 +303,7 @@ config ARCH_CNS3XXX
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
@@ -439,21 +442,6 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_L7200
-	bool "LinkUp-L7200"
-	select CPU_ARM720T
-	select FIQ
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Say Y here if you intend to run this kernel on a LinkUp Systems
-	  L7200 Software Development Board which uses an ARM720T processor.
-	  Information on this board can be obtained at:
-
-	  <http://www.linkupsys.com/>
-
-	  If you have any questions or comments about the Linux kernel port
-	  to this board, send e-mail to <sjhill@cotw.com>.
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
@@ -482,6 +470,19 @@ config ARCH_LOKI
 	help
 	  Support for the Marvell Loki (88RC8480) SoC.
 
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_IDE
+	select ARM_AMBA
+	select USB_ARCH_HAS_OHCI
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for the NXP LPC32XX family of processors
+
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	select CPU_FEROCEON
@@ -586,6 +587,7 @@ config ARCH_MSM
 	bool "Qualcomm MSM"
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -719,7 +721,6 @@ config ARCH_SHARK
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
-	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_USES_GETTIMEOFFSET
 	help
@@ -845,6 +846,8 @@ source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-lpc32xx/Kconfig"
+
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -955,7 +958,8 @@ config XSCALE_PMU
 	default y
 
 config CPU_HAS_PMU
-	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool
 
@@ -1030,11 +1034,6 @@ endmenu
 
 source "arch/arm/common/Kconfig"
 
-config FORCE_MAX_ZONEORDER
-	int
-	depends on SA1111
-	default "9"
-
 menu "Bus support"
 
 config ARM_AMBA
@@ -1059,7 +1058,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1171,9 +1170,10 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1184,10 +1184,10 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 128 if ARCH_L7200
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
+	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100
 
 config THUMB2_KERNEL
@@ -1240,10 +1240,6 @@ config OABI_COMPAT
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
 
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
@@ -1251,13 +1247,7 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
-	int
-	default "4" if ARCH_LH7A40X
-	default "2"
-	depends on NEED_MULTIPLE_NODES
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
 	bool "High Memory Support (EXPERIMENTAL)"
@@ -1289,8 +1279,33 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SPARSE_IRQ
+	def_bool n
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
 source "mm/Kconfig"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order" if ARCH_SHMOBILE
+	range 11 64 if ARCH_SHMOBILE
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
@@ -1374,6 +1389,24 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+	  This feature requires gcc version 4.2 or above.
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
 endmenu
 
 menu "Boot options"
@@ -1484,6 +1517,105 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
+config AUTO_ZRELADDR
+	bool "Auto calculation of the decompressed kernel image address"
+	depends on !ZBOOT_ROM && !ARCH_U300
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. If AUTO_ZRELADDR is selected, the address
+	  will be determined at run-time by masking the current IP with
+	  0xf8000000. This assumes the zImage being placed in the first 128MB
+	  from start of memory.
+
+config ZRELADDR
+	hex "Physical address of the decompressed kernel image"
+	depends on !AUTO_ZRELADDR
+	default 0x00008000 if ARCH_BCMRING ||\
+		ARCH_CNS3XXX ||\
+		ARCH_DOVE ||\
+		ARCH_EBSA110 ||\
+		ARCH_FOOTBRIDGE ||\
+		ARCH_INTEGRATOR ||\
+		ARCH_IOP13XX ||\
+		ARCH_IOP33X ||\
+		ARCH_IXP2000 ||\
+		ARCH_IXP23XX ||\
+		ARCH_IXP4XX ||\
+		ARCH_KIRKWOOD ||\
+		ARCH_KS8695 ||\
+		ARCH_LOKI ||\
+		ARCH_MMP ||\
+		ARCH_MV78XX0 ||\
+		ARCH_NOMADIK ||\
+		ARCH_NUC93X ||\
+		ARCH_NS9XXX ||\
+		ARCH_ORION5X ||\
+		ARCH_SPEAR3XX ||\
+		ARCH_SPEAR6XX ||\
+		ARCH_U8500 ||\
+		ARCH_VERSATILE ||\
+		ARCH_W90X900
+	default 0x08008000 if ARCH_MX1 ||\
+		ARCH_SHARK
+	default 0x10008000 if ARCH_MSM ||\
+		ARCH_OMAP1 ||\
+		ARCH_RPC
+	default 0x20008000 if ARCH_S5P6440 ||\
+		ARCH_S5P6442 ||\
+		ARCH_S5PC100 ||\
+		ARCH_S5PV210
+	default 0x30008000 if ARCH_S3C2410 ||\
+		ARCH_S3C2400 ||\
+		ARCH_S3C2412 ||\
+		ARCH_S3C2416 ||\
+		ARCH_S3C2440 ||\
+		ARCH_S3C2443
+	default 0x40008000 if ARCH_STMP378X ||\
+		ARCH_STMP37XX ||\
+		ARCH_SH7372 ||\
+		ARCH_SH7377
+	default 0x50008000 if ARCH_S3C64XX ||\
+		ARCH_SH7367
+	default 0x60008000 if ARCH_VEXPRESS
+	default 0x80008000 if ARCH_MX25 ||\
+		ARCH_MX3 ||\
+		ARCH_NETX ||\
+		ARCH_OMAP2PLUS ||\
+		ARCH_PNX4008
+	default 0x90008000 if ARCH_MX5 ||\
+		ARCH_MX91231
+	default 0xa0008000 if ARCH_IOP32X ||\
+		ARCH_PXA ||\
+		MACH_MX27
+	default 0xc0008000 if ARCH_LH7A40X ||\
+		MACH_MX21
+	default 0xf0008000 if ARCH_AAEC2000 ||\
+		ARCH_L7200
+	default 0xc0028000 if ARCH_CLPS711X
+	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
+	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
+	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
+	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
+	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
+	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
+	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
+	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
+	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
+	default 0xc0208000 if ARCH_SA1100 && SA1111
+	default 0xc0008000 if ARCH_SA1100 && !SA1111
+	default 0x30108000 if ARCH_S3C2410 && PM_H1940
+	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
+	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. ZRELADDR has to be specified when the
+	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
+	  selected.
+
 endmenu
 
 menu "CPU Power Management"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313724d..63d998e8c67 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -34,6 +34,10 @@ ifeq ($(CONFIG_FRAME_POINTER),y)
 KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
 
+ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
+KBUILD_CFLAGS	+=-fstack-protector
+endif
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 AS		+= -EB
@@ -139,14 +143,14 @@ machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_L7200)		:= l7200
 machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
 machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_MX1)		:= mx1
-machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX1)		:= imx
+machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_MX5)		:= mx5
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4113e..f705213caa8 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,18 +14,16 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
+-include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+export INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(ZRELADDR)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 53faa9063a0..7636c9b3f9a 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -19,10 +20,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS		+= head-l7200.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
@@ -71,6 +68,9 @@ targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
 		 font.o font.c head.o misc.o $(OBJS)
 
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
@@ -79,19 +79,9 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
-# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
-# linker symbols.  We only define initrd_phys and params_phys if the
-# machine class defined the corresponding makefile variable.
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-ifneq ($(INITRD_PHYS),)
-LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
-endif
-ifneq ($(PARAMS_PHYS),)
-LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
-endif
 # ?
 LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
deleted file mode 100644
index 491a037b297..00000000000
--- a/arch/arm/boot/compressed/Makefile.debug
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# linux/arch/arm/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-COMPRESSED_EXTRA=../../lib/ll_char_wr.o
-OBJECTS=misc-debug.o ll_char_wr.aout.o
-
-CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
-
-test-gzip: piggy.aout.o $(OBJECTS)
-	$(CC) -o $@ $(OBJECTS) piggy.aout.o
-
-misc-debug.o: misc.c
-	$(CC) $(CFLAGS) -o $@ misc.c
-
-piggy.aout.o: piggy.o
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
-
-ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
-
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
deleted file mode 100644
index d0e3b20856c..00000000000
--- a/arch/arm/boot/compressed/head-l7200.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * linux/arch/arm/boot/compressed/head-l7200.S
- * 
- * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
- * 
- * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
- * is merged with head.S by the linker.
- */
-
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_ARCH_L7200
-#error What am I doing here...
-#endif
-
-		.section        ".start", "ax"
-
-__L7200_start:
-		mov	r0, #0x00100000		@ FLASH address of initrd
-		mov	r2, #0xf1000000		@ RAM address of initrd
-		add	r3, r2, #0x00700000	@ Size of initrd 
-1:
-		ldmia   r0!, {r4, r5, r6, r7}
-		stmia   r2!, {r4, r5, r6, r7}
-		cmp	r2, r3
-		ble	1b
-
-		mov	r8, #0			@ Zero it out
-		mov	r7, #MACH_TYPE_L7200	@ Set architecture ID
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5191b1532e..abf4d65acf6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,9 +170,16 @@ not_angel:
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
+ ARM(		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip, sp})
+ THUMB(		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip}	)
  THUMB(		ldr	sp, [r0, #32]				)
+#ifdef CONFIG_AUTO_ZRELADDR
+		@ determine final kernel image address
+		and	r4, pc, #0xf8000000
+		add	r4, r4, #TEXT_OFFSET
+#else
+		ldr	r4, =CONFIG_ZRELADDR
+#endif
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -310,18 +317,17 @@ wont_overwrite:	mov	r0, r4
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	zreladdr		@ r4
 		.word	_start			@ r5
 		.word	_image_size		@ r6
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	user_stack+4096		@ sp
+		.word	user_stack_end		@ sp
 LC1:		.word	reloc_end - reloc_start
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
-params:		ldr	r0, =params_phys
+params:		ldr	r0, =0x10000100		@ params_phys for RPC
 		mov	pc, lr
 		.ltorg
 		.align
@@ -339,9 +345,8 @@ params:		ldr	r0, =params_phys
  *  r4 = kernel execution address
  *  r7 = architecture number
  *  r8 = atags pointer
- *  r9 = run-time address of "start"  (???)
  * On exit,
- *  r1, r2, r3, r9, r10, r12 corrupted
+ *  r0, r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
  *  r4, r5, r6, r7, r8
  */
@@ -396,12 +401,18 @@ __armv3_mpu_cache_on:
 
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		/*
+		 * ?? ARMv3 MMU does not allow reading the control register,
+		 * does this really work on ARMv3 MPU?
+		 */
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 						@ .... .... .... WC.M
 		orr	r0, r0, #0x000d		@ .... .... .... 11.1
+		/* ?? this overwrites the value constructed above? */
 		mov	r0, #0
 		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
 
+		/* ?? invalidate for the second time? */
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
@@ -771,8 +782,10 @@ proc_types:
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On exit, r0, r1, r2, r3, r9, r12 corrupted
- * This routine must preserve: r4, r6, r7
+ * On exit,
+ *  r0, r1, r2, r3, r9, r12 corrupted
+ * This routine must preserve:
+ *  r4, r6, r7
  */
 		.align	5
 cache_off:	mov	r3, #12			@ cache_off function
@@ -845,7 +858,7 @@ __armv3_mmu_cache_off:
  * Clean and flush the cache to maintain consistency.
  *
  * On exit,
- *  r1, r2, r3, r9, r11, r12 corrupted
+ *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -988,7 +1001,7 @@ no_cache_id:
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
 /*
@@ -1001,6 +1014,7 @@ __armv3_mpu_cache_flush:
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
 
+@ phex corrupts {r0, r1, r2, r3}
 phex:		adr	r3, phexbuf
 		mov	r2, #0
 		strb	r2, [r3, r1]
@@ -1015,6 +1029,7 @@ phex:		adr	r3, phexbuf
 		strb	r2, [r3, r1]
 		b	1b
 
+@ puts corrupts {r0, r1, r2, r3}
 puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
@@ -1029,12 +1044,14 @@ puts:		loadsp	r3, r1
 		teq	r0, #0
 		bne	1b
 		mov	pc, lr
+@ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
 		mov	r0, #0
 		loadsp	r3, r1
 		b	2b
 
+@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
 memdump:	mov	r12, r0
 		mov	r10, lr
 		mov	r11, #0
@@ -1070,3 +1087,4 @@ reloc_end:
 		.align
 		.section ".stack", "w"
 user_stack:	.space	4096
+user_stack_end:
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d2b2ef41cd4..e653a6d3c8d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -28,9 +28,6 @@ unsigned int __machine_arch_type;
 
 #include <asm/unaligned.h>
 
-#ifdef STANDALONE_DEBUG
-#define putstr printf
-#else
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -116,7 +113,6 @@ static void putstr(const char *ptr)
 	flush();
 }
 
-#endif
 
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
@@ -186,7 +182,6 @@ asmlinkage void __div0(void)
 
 extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
-#ifndef STANDALONE_DEBUG
 
 unsigned long
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
@@ -211,18 +206,3 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
-#else
-
-char output_buffer[1500*1024];
-
-int main()
-{
-	output_data = output_buffer;
-
-	putstr("Uncompressing Linux...");
-	decompress(input_data, input_data_end - input_data,
-			NULL, NULL, output_data, NULL, error);
-	putstr("done.\n");
-	return 0;
-}
-#endif
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 337741f734a..7dfa9a85bc0 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -108,6 +108,51 @@ static void gic_unmask_irq(unsigned int irq)
 	spin_unlock(&irq_controller_lock);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(irq);
+	unsigned int gicirq = gic_irq(irq);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	spin_lock(&irq_controller_lock);
+
+	val = readl(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -161,6 +206,7 @@ static struct irq_chip gic_chip = {
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
+	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a52a27c1d9b..517d50ddbeb 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = SZ_1M >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
@@ -951,8 +948,6 @@ static int sa1111_resume(struct platform_device *dev)
 	if (!save)
 		return 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-
 	/*
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
@@ -969,6 +964,13 @@ static int sa1111_resume(struct platform_device *dev)
 	 * First of all, wake up the chip.
 	 */
 	sa1111_wake(sachip);
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 
@@ -1023,13 +1025,12 @@ static int sa1111_remove(struct platform_device *pdev)
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-
 #ifdef CONFIG_PM
 		kfree(sachip->saved_state);
 		sachip->saved_state = NULL;
 #endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
 	}
 
 	return 0;
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
index 6e32a85641a..92b0f90d151 100644
--- a/arch/arm/configs/acs5k_defconfig
+++ b/arch/arm/configs/acs5k_defconfig
@@ -1,1232 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Dec 16 13:31:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
index b34b1eabac3..2a27a147463 100644
--- a/arch/arm/configs/acs5k_tiny_defconfig
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -1,940 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Jan  6 13:23:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
-# CONFIG_MACH_KS8695 is not set
-# CONFIG_MACH_DSM320 is not set
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 64fe7f10c12..2afdf67c212 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -1,1258 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Tue Aug 12 22:30:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_AFEB9260=y
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
 CONFIG_RTC_DRV_FM3130=y
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 30927cac6a9..5536c488dd0 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,1148 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun Apr 20 00:29:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="gum"
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
 CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_MACH_GUMSTIX_F=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=2
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_VIRTUAL=m
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
index e4f4fb522ba..ad2bc503f2b 100644
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,1377 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Wed Oct 28 15:47:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
 CONFIG_MACH_OMAP3517EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=y
 CONFIG_CAN_DEV=y
 CONFIG_CAN_CALC_BITTIMING=y
 CONFIG_CAN_TI_HECC=y
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
 CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 6d8a0c891f8..75de45e949b 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -1,906 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 04:28:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=m
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
 CONFIG_MACH_AMS_DELTA=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
 CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_AMS_DELTA=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_AMS_DELTA=y
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
@@ -908,418 +84,38 @@ CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_AMS_DELTA=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
index e14229be767..2eef85e3c9b 100644
--- a/arch/arm/configs/ap4evb_defconfig
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:25:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
-# CONFIG_ARCH_SH7377 is not set
 CONFIG_ARCH_SH7372=y
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_AP4EVB=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index daa75bc98d4..558ecd8f66f 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 13:13:30 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_SA1100_FIR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
index 76d724b8041..695e32d4fb5 100644
--- a/arch/arm/configs/at572d940hfek_defconfig
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -1,452 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec  5 10:58:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-AT572D940HF"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
 CONFIG_ARCH_AT572D940HF=y
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT572D940HF Board Type
-#
 CONFIG_MACH_AT572D940HFEB=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-CONFIG_NUM_SERIAL=3
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=1
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_BLOCK_RO=m
 CONFIG_FTL=m
@@ -456,162 +72,52 @@ CONFIG_INFTL=m
 CONFIG_RFD_FTL=m
 CONFIG_SSFDC=m
 CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
 CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
 CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_ATMEL is not set
 CONFIG_MTD_NAND_NANDSIM=m
 CONFIG_MTD_NAND_PLATFORM=m
 CONFIG_MTD_ALAUDA=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -620,10 +126,6 @@ CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -633,809 +135,198 @@ CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
 CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
 CONFIG_MOUSE_VSXXXAA=m
 CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
 CONFIG_SPECIALIX=m
-CONFIG_RIO=m
-# CONFIG_RIO_OLDPCI is not set
 CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=m
 CONFIG_R3964=m
 CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
 CONFIG_TCG_TPM=m
 CONFIG_TCG_NSC=m
 CONFIG_TCG_ATMEL=m
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_DS1682=m
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_BITBANG=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_AT25=m
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_PCM_OSS_PLUGINS is not set
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_AT73C213 is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
 CONFIG_RTC_DRV_DS1305=y
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
 CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_CHECK=y
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
-# CONFIG_UBIFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
@@ -1443,198 +334,25 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
 CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_SECURITYFS=y
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index b1ab50bee46..ffb1edd9336 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -1,1218 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 22:55:57 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91CAP9=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91CAP9 Board Type
-#
 CONFIG_MACH_AT91CAP9ADK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 1fffec86a11..4438e64f3bf 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -1,1009 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:54:30 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_ECO920=y
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index c846a795d1d..ccd517c64bc 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -1,997 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:57:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
 CONFIG_MACH_AT91RM9200EK=y
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 472ea11eedf..f8a9226413b 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,1039 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:20:50 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
 CONFIG_MACH_AT91SAM9260EK=y
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4ecde429cf1..b46025b66b6 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,1178 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:21:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
 CONFIG_ARCH_AT91SAM9261=y
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9261 Board Type
-#
 CONFIG_MACH_AT91SAM9261EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_INTSRAM is not set
-# CONFIG_FB_ATMEL_STN is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 9b792b60c7f..8a04d6f4e06 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,1207 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:12:20 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
 CONFIG_MACH_AT91SAM9263EK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_AT91=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 64ce106d53e..f1bac70d6ce 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,1167 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Jun 10 15:51:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
 CONFIG_MACH_AT91SAM9G20EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_AT91_SLOW_CLOCK is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_AT91_AC97 is not set
-
-#
-# SPI devices
-#
 CONFIG_SND_AT73C213=y
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 90e48bfda16..75621e4d03f 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -1,946 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:24:14 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
 CONFIG_ARCH_AT91SAM9RL=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9RL Board Type
-#
 CONFIG_MACH_AT91SAM9RLEK=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 6315534976c..1b0e9a1689b 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1,1311 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:53:18 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_ATEB9200=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=m
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_NET1080=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b175b6b8feb..3a1ad15a779 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,1242 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 19:00:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
 CONFIG_SA1100_BADGE4=y
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ARTHUR=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+CONFIG_SA1100_FIR=y
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIVHCI=m
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=y
-# CONFIG_VIA_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIVHCI=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=y
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
+CONFIG_USB_MON=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
 CONFIG_USB_RIO500=m
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 6ac6693299b..75984cd1e23 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -1,800 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Mon Mar 29 12:01:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
 CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
 CONFIG_ARCH_BCMRING=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_FPGA11107 is not set
-CONFIG_ARCH_BCM11107=y
-
-#
-# BCMRING Options
-#
 CONFIG_BCM_ZRELADDR=0x8000
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0e000000
 CONFIG_ZBOOT_ROM_BSS=0x0ea00000
 CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BCM_UMI=y
 CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
 # CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index eef33de3ca1..cedc92ef88a 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -1,554 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Mar  6 10:07:26 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
 CONFIG_MACH_CAM60=y
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0x20004000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -557,671 +77,98 @@ CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index b6a70630678..ac64dbd8a49 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -1,723 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue Jun 14 12:05:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
 CONFIG_MACH_CARMEVA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-CONFIG_ARM_AT91_ETHER_RMII=y
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_NFSD=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index d662cab9cc2..dce912d146b 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -1,902 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 14:19:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
-# CONFIG_SA1100_CERF_FLASH_32MB is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 032b49bad91..8bb06334ce9 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -1,1732 +1,157 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 17:10:40 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
 CONFIG_MACH_CM_T35=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 47d22d09e70..dcfbcf3b6c3 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,1369 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:31:36 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
 CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=m
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_ENE_TUNE is not set
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
 CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_UCB1400_CORE=m
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 # CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1373,589 +136,54 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index a334069c790..921e56a7572 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,446 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 19:03:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-cm-x300"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA3xx=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -450,1304 +48,141 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_WACOM=m
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index d5c088149e4..313627adf46 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -1,831 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sun May  2 21:58:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=m
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
 CONFIG_ARCH_CNS3XXX=y
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# CNS3XXX platform type
-#
 CONFIG_MACH_CNS3420VB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_GIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=20000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
 # CONFIG_ATA_SFF is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
 CONFIG_FSCACHE=y
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-# CONFIG_CACHEFILES is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index c962870b3f8..f52c64e36d8 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,443 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
 CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -447,1290 +53,128 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=y
-CONFIG_LIB80211_CRYPT_CCMP=y
-CONFIG_LIB80211_CRYPT_TKIP=y
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 11fdb5afdec..b985334e42d 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -1,1155 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:13:20 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
 CONFIG_MACH_COLIBRI300=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_AX88796=y
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 26e458d8263..310f9a6270b 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,959 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Fri Apr 14 19:09:52 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
 CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 5e4069f4275..4a1fa81ed37 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,542 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:12:23 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_AKITA is not set
-# CONFIG_MACH_SPITZ is not set
-# CONFIG_MACH_BORZOI is not set
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-# CONFIG_TOSA_BT is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -546,18 +77,9 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -566,848 +88,107 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1415,479 +196,79 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index c9137aaf23a..bbf729e2fb6 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -1,1337 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:57:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_AFEB9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
 CONFIG_MACH_CPU9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index d2344799171..e7d7942927f 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -1,1327 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 15:03:43 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
 CONFIG_MACH_CPU9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
index 1f8dda6e37c..022aeb55b67 100644
--- a/arch/arm/configs/cpuat91_defconfig
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -1,1315 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:45:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
 CONFIG_MACH_CPUAT91=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index f095040dab0..a24c448840c 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1,863 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:19:24 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
 CONFIG_MACH_CSB337=y
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
-# CONFIG_MACH_HOMEMATIC is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_SWEDATMS is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=128
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -871,345 +83,22 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_AT91 is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
 # CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 507154016fc..98552adac5f 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -1,937 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Fri Apr  4 22:06:15 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
 CONFIG_MACH_CSB637=y
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -945,276 +79,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index e14c99c2b57..ba6670556f7 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,1331 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DA8XX=y
-# CONFIG_ARCH_DAVINCI_DM365 is not set
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
-CONFIG_DA830_UI_LCD=y
-# CONFIG_DA830_UI_NAND is not set
-CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
-CONFIG_DA850_UI_NONE=y
-# CONFIG_DA850_UI_RMII is not set
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_DAVINCI is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_DA8XX=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_SND_DA830_SOC_EVM is not set
-# CONFIG_SND_DA850_SOC_EVM is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 625035fd0a6..2519cc5a5f8 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,1835 +1,194 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Mon Oct 12 14:13:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_AINTC=y
-CONFIG_ARCH_DAVINCI_DMx=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-# CONFIG_ARCH_DAVINCI_DA830 is not set
-# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_DAVINCI_DM6467_EVM=y
-CONFIG_MACH_DAVINCI_DM365_EVM=y
-CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_DAVINCI=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
 CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_DM355EVM=m
-CONFIG_INPUT_DM365EVM=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_DAVINCI_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 CONFIG_MFD_DM355EVM_MSP=y
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_DAVINCI_SOC_EVM=m
 CONFIG_SND_DM6467_SOC_EVM=m
-# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# DaVinci 35x and 644x USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_DAVINCI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_DM355EVM is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
index c7a68202fa3..786cbe49528 100644
--- a/arch/arm/configs/devkit8000_defconfig
+++ b/arch/arm/configs/devkit8000_defconfig
@@ -1,1914 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Wed Mar 24 13:27:25 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_DEVKIT8000=y
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=y
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
 CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index b7b2ab088dd..9359e1bf32c 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,1619 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:53:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_DOVE=y
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Dove Implementations
-#
 CONFIG_MACH_DOVE_DB=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
index d5e82796911..c3194186920 100644
--- a/arch/arm/configs/ebsa110_defconfig
+++ b/arch/arm/configs/ebsa110_defconfig
@@ -1,747 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 18:29:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 CONFIG_ARCH_EBSA110=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
 CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
 CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
 CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
 CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_MARK=y
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_MATCH_RT=y
 CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_FW_LOADER=m
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_AM79C961A=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 25dd53b7cef..6bb6abdcea8 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -1,1313 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jun  9 01:30:18 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
 CONFIG_MACH_ECBAT91=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91RM9200_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_AT91_SPI is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ATMEL is not set
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_AT91=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig
index e3a6cd32669..7b62be1561e 100644
--- a/arch/arm/configs/edb7211_defconfig
+++ b/arch/arm/configs/edb7211_defconfig
@@ -1,573 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:48:12 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
 CONFIG_ARCH_EDB7211=y
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_ARCH_EP7211=y
-# CONFIG_EP72XX_ROM_BOOT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 2bee932439f..d7db34f7970 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,1140 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:43:31 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
 CONFIG_MACH_EM_X270=y
 CONFIG_MACH_EXEDA=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
 CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_MBX_DEBUG is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1144,597 +136,59 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 35d735ede9b..6d6689cdf39 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,1464 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Tue May 19 12:26:49 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Cirrus EP93xx Implementation Options
-#
 CONFIG_CRUNCH=y
-
-#
-# EP93xx Platforms
-#
-# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
-CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB93XX=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9=y
 CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
 CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_TS7250 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_EP93XX=y
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 74baf570929..1691dea582f 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,1246 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Wed Dec 24 23:35:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_E330=y
-CONFIG_MACH_E350=y
-CONFIG_MACH_E740=y
-CONFIG_MACH_E750=y
-CONFIG_MACH_E400=y
-CONFIG_MACH_E800=y
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_PXA_FICP=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_MFD_TMIO=y
 CONFIG_MFD_T7L66XB=y
 CONFIG_MFD_TC6387XB=y
 CONFIG_MFD_TC6393XB=y
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 9e9057c5a2a..c4eeb6d1cbf 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,451 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Mon Nov  2 13:18:50 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
-CONFIG_MACH_EZX_A780=y
-CONFIG_MACH_EZX_E680=y
-CONFIG_MACH_EZX_A1200=y
-CONFIG_MACH_EZX_A910=y
-CONFIG_MACH_EZX_E6=y
-CONFIG_MACH_EZX_E2=y
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -458,22 +77,12 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -484,21 +93,15 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -506,15 +109,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -526,21 +121,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -549,10 +133,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -570,38 +150,7 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -611,192 +160,42 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -804,289 +203,38 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_PCAP=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_PCAP=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1105,650 +253,96 @@ CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
 CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_RTC_DRV_PCAP=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1787,214 +381,40 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 04d97937afe..4f925ead261 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -1,234 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:02:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
 CONFIG_ARCH_CATS=y
 CONFIG_ARCH_PERSONAL_SERVER=y
-# CONFIG_ARCH_EBSA285_ADDIN is not set
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-CONFIG_ARCH_EBSA285=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_ATM=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=y
-
-#
-# Parallel IDE high-level drivers
-#
 CONFIG_PARIDE_PD=m
 CONFIG_PARIDE_PCD=m
 CONFIG_PARIDE_PF=m
 CONFIG_PARIDE_PT=m
 CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
 CONFIG_PARIDE_ATEN=m
 CONFIG_PARIDE_BPCK=m
-# CONFIG_PARIDE_BPCK6 is not set
 CONFIG_PARIDE_COMM=m
 CONFIG_PARIDE_DSTR=m
 CONFIG_PARIDE_FIT2=m
 CONFIG_PARIDE_FIT3=m
 CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
 CONFIG_PARIDE_EPIA=m
 CONFIG_PARIDE_FRIQ=m
 CONFIG_PARIDE_FRPW=m
@@ -236,1019 +63,65 @@ CONFIG_PARIDE_KBIC=m
 CONFIG_PARIDE_KTTI=m
 CONFIG_PARIDE_ON20=m
 CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-CONFIG_WINBOND_FIR=m
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_21285_WATCHDOG=m
+CONFIG_977_WATCHDOG=m
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_PRINTER=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFSD=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-# CONFIG_ACORN_PARTITION_ICS is not set
 CONFIG_ACORN_PARTITION_ADFS=y
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-# CONFIG_ACORN_PARTITION_RISCIX is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_CODEPAGE_852=m
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig
index d58142bf6fa..e11c7eab8ed 100644
--- a/arch/arm/configs/fortunet_defconfig
+++ b/arch/arm/configs/fortunet_defconfig
@@ -1,556 +1,28 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:51:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
 CONFIG_ARCH_FORTUNET=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
index 3c19031961d..4a336ab5a0c 100644
--- a/arch/arm/configs/g3evm_defconfig
+++ b/arch/arm/configs/g3evm_defconfig
@@ -1,774 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:20:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
 CONFIG_ARCH_SH7367=y
-# CONFIG_ARCH_SH7377 is not set
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G3EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x50000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
index 8ee79a53713..21c6d0307bc 100644
--- a/arch/arm/configs/g4evm_defconfig
+++ b/arch/arm/configs/g4evm_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:21:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
 CONFIG_ARCH_SH7377=y
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G4EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index a8ad8fbe118..317960f1248 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,1163 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 24 00:09:30 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index 5bb73728fad..ac336f10000 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -1,995 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 16:13:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_MACH_H5000=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-CONFIG_USB_PXA25X_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
index 09a6c6a27bd..bee94d29655 100644
--- a/arch/arm/configs/h7201_defconfig
+++ b/arch/arm/configs/h7201_defconfig
@@ -1,565 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:11:33 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
 CONFIG_ARCH_H7201=y
-# CONFIG_ARCH_H7202 is not set
-CONFIG_CPU_H7201=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_H720X is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index fedc52bd22b..69405a76242 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -1,729 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:15:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
-# CONFIG_ARCH_H7201 is not set
 CONFIG_ARCH_H7202=y
-CONFIG_CPU_H7202=y
-# CONFIG_H7202_SERIAL23 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,19200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 CONFIG_MTD_H720X=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 2da1acf41f4..bed80472992 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,766 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 20:58:58 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
index e0ef0d121aa..edfa1c0daab 100644
--- a/arch/arm/configs/htcherald_defconfig
+++ b/arch/arm/configs/htcherald_defconfig
@@ -1,1144 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sat Dec  5 12:16:24 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 CONFIG_ARCH_OMAP850=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_HTCWIZARD is not set
 CONFIG_MACH_HERALD=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_182MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM925T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_ZLIB=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
index e7940a9c5cc..fcda057d584 100644
--- a/arch/arm/configs/igep0020_defconfig
+++ b/arch/arm/configs/igep0020_defconfig
@@ -1,460 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Thu Jan  7 16:14:55 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_IGEP0020=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -464,1183 +51,129 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
 CONFIG_MTD_ONENAND_2X_PROGRAM=y
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
 CONFIG_SSB=m
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=14
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
 # CONFIG_OMAP2_DSS_VENC is not set
-# CONFIG_OMAP2_DSS_SDI is not set
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
 # CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_TAAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_IGEP0020=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 21f2bff8a36..ade55c8c408 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -1,491 +1,62 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Thu Apr  8 14:49:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_ARCOM_ZEUS is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_CAPC7117 is not set
-# CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_RAUMFELD_RC is not set
-# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
-# CONFIG_MACH_RAUMFELD_SPEAKER is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_ICONTROL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_CPU_HAS_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -498,23 +69,12 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -525,21 +85,15 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -547,15 +101,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -567,21 +113,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -590,10 +125,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -611,215 +142,40 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_IEEE802154=y
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_IEEE802154_DRIVERS=y
-# CONFIG_IEEE802154_FAKEHARD is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -827,302 +183,36 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DA9030 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1141,645 +231,89 @@ CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=y
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV9640 is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_DA903X is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1818,222 +352,41 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 6b0d0439563..7196ade07e2 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,862 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:14:51 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_INTEGRATOR=y
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Integrator Options
-#
 CONFIG_ARCH_INTEGRATOR_AP=y
-# CONFIG_ARCH_INTEGRATOR_CP is not set
-# CONFIG_INTEGRATOR_IMPD1 is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1022 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ICST525=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_INTEGRATOR=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 3c040cc9f3b..4fa94a1f115 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,1159 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:03 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_IOP13XX=y
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP13XX Implementation Options
-#
-
-#
-# IOP13XX Platform Support
-#
 CONFIG_MACH_IQ81340SC=y
 CONFIG_MACH_IQ81340MC=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfa000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 62a854996be..4f2ec3ac138 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,1389 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 15:49:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
 CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP32x Implementation Options
-#
-
-#
-# IOP32x Platform Types
-#
-CONFIG_MACH_EP80219=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
-CONFIG_IOP3XX_ATU=y
-# CONFIG_MACH_EM7210 is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
 CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 0bc23ece4c2..aa36128abca 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,1391 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 13:41:41 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP33x Implementation Options
-#
-
-#
-# IOP33x Platform Types
-#
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 8b5b5764a22..90832468454 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,1113 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:39 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
 CONFIG_ARCH_ENP2611=y
 CONFIG_ARCH_IXDP2400=y
 CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
 CONFIG_ARCH_IXDP2401=y
 CONFIG_ARCH_IXDP2801=y
-CONFIG_MACH_IXDP28X5=y
-CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_ENP2611_MSF_NET=y
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_WATCHDOG=y
+CONFIG_IXP2000_WATCHDOG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 59c11c93180..7fc056a8569 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,1408 +1,105 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:45 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP23xx Implementation Options
-#
-
-#
-# IXP23xx Platforms
-#
 CONFIG_MACH_ESPRESSO=y
 CONFIG_MACH_IXDP2351=y
 CONFIG_MACH_ROADRUNNER=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index a907ad50ad3..5c502393400 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,155 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Jan 27 07:33:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_LOFT=y
@@ -160,190 +18,43 @@ CONFIG_ARCH_IXDP425=y
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
-CONFIG_ARCH_IXDP4XX=y
 CONFIG_MACH_FSG=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
-
-#
-# IXP4xx Options
-#
-CONFIG_DMABOUNCE=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_NPE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -352,102 +63,24 @@ CONFIG_IP_VS_LBLC=m
 CONFIG_IP_VS_LBLCR=m
 CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -460,1132 +93,113 @@ CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
 CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
 CONFIG_SATA_VIA=y
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
 CONFIG_PATA_ARTOP=y
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_IXP4XX_CF=y
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_IXP4XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=m
 CONFIG_HDLC_RAW=m
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_IXP4XX_HSS is not set
 CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
 CONFIG_WAN_ROUTER_DRIVERS=m
-# CONFIG_CYCLADES_SYNC is not set
-# CONFIG_LAPBETHER is not set
-# CONFIG_X25_ASY is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_IXP4XX=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_FSG=y
-
-#
-# LED Triggers
-#
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index d1f1646e23c..ea80e7e867c 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,960 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Fri Aug 21 15:41:39 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-CONFIG_SA1100_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP7XX=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_HP700=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_HP700=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -993,182 +104,9 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index f661e765d9b..896dbe00dc6 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -1,883 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:54:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KAFA=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 668ba59946d..9f906a85f5c 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,1304 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Wed Jun  3 13:52:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4611d3ce451..ccc9c9959b8 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,1876 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:08:54 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Marvell Kirkwood Implementations
-#
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_ESATA_SHEEVAPLUG=y
+CONFIG_MACH_GURUPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_OPENRD_ULTIMATE=y
 CONFIG_MACH_NETSPACE_V2=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
+CONFIG_MACH_INETSPACE_V2=y
+CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_NET2BIG_V2=y
+CONFIG_MACH_NET5BIG_V2=y
+CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index e6f2276904f..47c488379f8 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -1,1021 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Fri Dec  5 10:30:27 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index af759517693..faa2865658a 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -1,875 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:53:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
 CONFIG_SA1100_LART=y
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_LART=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_LART=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
 CONFIG_CRC32=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 6df7b147161..e1eaff7f553 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -1,1146 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 03:07:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_LOKI=y
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Marvell Loki (88RC8480) Implementations
-#
 CONFIG_MACH_LB88RC8480=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_MV=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index aeb76861534..1c8c9ee71d3 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,1031 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:51 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index 6116feea2e1..20caaaba4a0 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -1,877 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Nov  3 14:15:32 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
+# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
 CONFIG_MACH_LPD7A400=y
-# CONFIG_MACH_LPD7A404 is not set
-CONFIG_ARCH_LH7A400=y
-CONFIG_LPD7A40X_CPLD_SSP=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADS7843_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 142cccdd971..1efcce97b4a 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1,1127 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 17:50:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
-# CONFIG_MACH_LPD7A400 is not set
 CONFIG_MACH_LPD7A404=y
-CONFIG_ARCH_LH7A404=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADC_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
-# CONFIG_FB_ARMCLCD_HITACHI is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_LH7=y
-CONFIG_USB_LH7=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 75c6293376b..c4ba27458ba 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -1,800 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:18:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
 CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LUBBOCK=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_G_SERIAL=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
deleted file mode 100644
index c1a1fb049a7..00000000000
--- a/arch/arm/configs/lusl7200_defconfig
+++ /dev/null
@@ -1,453 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:24:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_FIQ=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-CONFIG_ARCH_L7200=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x00010000
-CONFIG_ZBOOT_ROM_BSS=0xf03e0000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 8e9a7232bc4..af805e8fd03 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,432 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Jan 30 12:42:03 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -436,1101 +56,127 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DS2760=y
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
 CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_BQ24022=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_BQ24022=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 1cddb617849..04efa1b3ef2 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -1,794 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 20:00:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index ff44bd1615c..2472a958583 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -1,383 +1,38 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Wed May 20 12:29:51 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_S3C_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -385,82 +40,21 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -470,10 +64,6 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
@@ -484,298 +74,60 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_INFTL=y
 CONFIG_RFD_FTL=y
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
 CONFIG_MTD_LPDDR=y
-CONFIG_MTD_QINFO_PROBE=y
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_SENSORS_TSL2550=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
 CONFIG_ZD1211RW=m
 CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -784,1065 +136,159 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=128
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_S3C24XX=y
-# CONFIG_SPI_S3C24XX_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IBMAEM is not set
-# CONFIG_SENSORS_IBMPEX is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=m
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
-# CONFIG_USB_STORAGE_FREECOM is not set
 CONFIG_USB_STORAGE_ISD200=m
 CONFIG_USB_STORAGE_USBAT=m
 CONFIG_USB_STORAGE_SDDR09=m
 CONFIG_USB_STORAGE_SDDR55=m
 CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 CONFIG_USB_SERIAL_CP210X=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
 CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1882,165 +328,41 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2048,7 +370,6 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2056,41 +377,8 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 4b55dcb6002..47ad3b1a4fe 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -1,1223 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Wed Apr 28 11:23:19 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910/MMP2 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
-# CONFIG_MACH_AVENGERS_LITE is not set
-# CONFIG_MACH_TTC_DKB is not set
 CONFIG_MACH_FLINT=y
 CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_CPU_MMP2=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
 CONFIG_MFD_MAX8925=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_MAX8649=y
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_MAX8925=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_MAX8925=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_MAX8925=y
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index fe25e3b9a45..2b8f7affc1e 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -1,894 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Nov  7 01:36:45 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_GPIOS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_GOLDFISH is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_MSM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# MSM7200 Board Type
-#
 CONFIG_MACH_HALIBUT=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_SERIAL_MSM_NOINIT is not set
-CONFIG_MSM_SMD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_MSM_NAND=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_GOLDFISH_NAND is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-CONFIG_MSM_RMNET=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_GPIO=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DCC_TTY=y
-# CONFIG_GOLDFISH_TTY is not set
-CONFIG_BINDER=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MSM=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9633=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_AKM8976=y
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_LOW_MEMORY_KILLER=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_MSM=y
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# USB Function Support
-#
-CONFIG_USB_FUNCTION=y
-CONFIG_USB_FUNCTION_MSM_HSUSB=y
-# CONFIG_USB_FUNCTION_NULL is not set
-# CONFIG_USB_FUNCTION_ZERO is not set
-# CONFIG_USB_FUNCTION_LOOPBACK is not set
-CONFIG_USB_FUNCTION_ADB=y
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Android
-#
-# CONFIG_ANDROID_GADGET is not set
-# CONFIG_ANDROID_RAM_CONSOLE is not set
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_VIBRATOR=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index da4710dd1da..b0d082422d4 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,1687 +1,140 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:22:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
 CONFIG_ARCH_MV78XX0=y
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Marvell MV78xx0 Implementations
-#
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index f5750703b70..2f38d971543 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,1104 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:11:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Freescale MXC Implementations
-#
 CONFIG_ARCH_MX1=y
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX1 platforms:
-#
-CONFIG_MACH_MXLADS=y
+CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_IMX=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 1ecd6276e0f..6454e18e2ab 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -1,1169 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Tue Apr 14 16:58:09 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-CONFIG_MACH_MX21=y
-# CONFIG_MACH_MX27 is not set
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX21ADS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b4c1366e9e0..b2038b0e266 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,1273 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Fri Jul 24 16:08:06 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
index d40953798d9..2d29329749e 100644
--- a/arch/arm/configs/mx31pdk_defconfig
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -1,772 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Sun Oct 26 15:55:29 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
 # CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
 CONFIG_MACH_MX31_3DS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 8a06bc64fe5..161f907b611 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,203 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 22:56:24 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-CONFIG_ARCH_MX3=y
-# CONFIG_ARCH_MXC91231 is not set
-CONFIG_ARCH_MX31=y
-CONFIG_ARCH_MX35=y
-
-#
-# MX3 platforms:
-#
-CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
@@ -212,1001 +26,98 @@ CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-CONFIG_ARCH_HAS_RNGA=y
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-CONFIG_MFD_WM8350=y
-CONFIG_MFD_WM8350_CONFIG_MODE_0=y
-CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
 CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_FB_MX3=y
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a708fd6d6ff..a665ecbbe2b 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -1,528 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Tue Feb  2 15:20:48 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX5=y
-CONFIG_ARCH_MX51=y
-
-#
-# MX5 platforms:
-#
 CONFIG_MACH_MX51_BABBAGE=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXC_TZIC=y
-# CONFIG_MXC_PWM is not set
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
 CONFIG_PM_TEST_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -541,761 +74,98 @@ CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
 CONFIG_MOUSE_PS2_ELANTECH=y
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_IMX is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_MXC=y
-
-
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_MXC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_MXC is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
 CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index de0c28aa43e..993e94df5d0 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -1,1421 +1,138 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8-omap1
-# Fri Jan 18 10:21:06 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_GPIO_SWITCH=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_STI=y
-CONFIG_OMAP_STI_CONSOLE=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
 CONFIG_MACH_NOKIA770=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIBRF6150=y
-# CONFIG_BT_HCIH4P is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP_HW=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-CONFIG_SENSORS_TLV320AIC23=y
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
-# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
 CONFIG_SND_DUMMY=y
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_OMAP_AIC23=y
-# CONFIG_SND_OMAP_TSC2101 is not set
-# CONFIG_SND_SX1 is not set
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-CONFIG_CBUS=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USER=y
-CONFIG_CBUS_TAHVO_USB=y
-# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_USER=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_RTC=y
-CONFIG_CBUS_RETU_WDT=y
-# CONFIG_CBUS_RETU_HEADSET is not set
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 9405e32783d..56aebb69411 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -1,1226 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug  6 22:17:23 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_HAVE_MTD_OTP=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
 CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_MENELAUS=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_TUSB6010=y
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_EEM=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index d165c757e44..462dd1850d1 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -1,1301 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Jul 29 10:46:54 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
-# CONFIG_MACH_USB_A9263 is not set
 CONFIG_MACH_NEOCORE926=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 # CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_MMC_AT91=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 171265ed02e..d7dc9922cff 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,1141 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 14:28:26 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
 CONFIG_PCMCIA_SA1111=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
-# CONFIG_ULTRA is not set
-CONFIG_SMC91X=y
 CONFIG_SMC9194=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_SA1111=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-CONFIG_USB_MOUSE=m
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 78f58a99c5a..25ed772dfb2 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,1043 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:18:42 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
 CONFIG_IP_NF_QUEUE=y
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_21285 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_21285_WATCHDOG is not set
-CONFIG_977_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=y
 CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_MAUI is not set
 CONFIG_SOUND_YM3812=y
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_WAVEARTIST=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 2a97e361ec7..316af5479d9 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -1,923 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Tue Jun  6 15:26:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_NETX=y
-
-#
-# NetX Implementations
-#
 CONFIG_MACH_NXDKN=y
 CONFIG_MACH_NXDB500=y
 CONFIG_MACH_NXEB500HMI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySMX0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_NET_NETX=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_NETX=y
 CONFIG_SERIAL_NETX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_NETX=m
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 92d90862f5e..0e2dc26ebe6 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,388 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 23 22:57:16 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_NOMADIK=y
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Nomadik boards
-#
 CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_NOMADIK_8815=y
-CONFIG_I2C_BITBANG_8815NHK=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
 CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -392,924 +46,87 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_TESTS=m
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_NOMADIK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_PL061 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
index 7dc1580e4d9..1f528a00298 100644
--- a/arch/arm/configs/ns9xxx_defconfig
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -3,26 +3,11 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_A9M9360=y
-CONFIG_MACH_A9M9750=y
-CONFIG_MACH_CC7UCAMRY=y
-CONFIG_MACH_CC9C=y
-CONFIG_MACH_CC9P9210=y
-CONFIG_MACH_CC9P9210JS=y
-CONFIG_MACH_CC9P9215=y
-CONFIG_MACH_CC9P9215JS=y
 CONFIG_MACH_CC9P9360DEV=y
 CONFIG_MACH_CC9P9360JS=y
-CONFIG_MACH_CC9P9360VAL=y
-CONFIG_MACH_CC9P9750DEV=y
-CONFIG_MACH_CC9P9750VAL=y
-CONFIG_MACH_CCW9C=y
-CONFIG_MACH_INC20OTTER=y
-CONFIG_MACH_OTTER=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_FPE_NWFPE=y
@@ -39,24 +24,18 @@ CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_NS9XXX_ETH=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_NS921X=y
-CONFIG_SERIAL_NS921X_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_ADC_NS9215=m
 CONFIG_I2C=m
 CONFIG_I2C_GPIO=m
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_DEBUG is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
@@ -65,7 +44,6 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_NS9215=m
 CONFIG_EXT2_FS=m
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
@@ -73,7 +51,6 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig
index f80848a929a..10180cfde16 100644
--- a/arch/arm/configs/nuc910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 10 22:09:25 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-CONFIG_CPU_W90P910=y
-
-#
-# W90P910 Machines
-#
-CONFIG_MACH_W90P910EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 51cc2a260cb..27aa8731330 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -1,972 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:31:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC950=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
 CONFIG_MACH_W90P950EVB=y
-
-#
-# NUC960 Machines
-#
-# CONFIG_MACH_W90N960EVB is not set
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NUC900=y
 CONFIG_GPM1040A0_320X240=y
 CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
index aa7e128f5d7..56fd7ad0ff1 100644
--- a/arch/arm/configs/nuc960_defconfig
+++ b/arch/arm/configs/nuc960_defconfig
@@ -1,921 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:20:11 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC960=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
-# CONFIG_MACH_W90P950EVB is not set
-
-#
-# NUC960 Machines
-#
 CONFIG_MACH_W90N960EVB=y
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 5a9e95fa728..aa24172a3e2 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -1,1388 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Wed Oct  1 17:14:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP3_BEAGLE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 94dfcf0aa67..5db9a6be205 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -1,287 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Thu May 13 10:54:43 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-CONFIG_OMAP_DEBUG_LEDS=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
 CONFIG_ARCH_OMAP2430=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PACKAGE_CUS=y
-CONFIG_OMAP_PACKAGE_CBP=y
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
 CONFIG_MACH_OMAP_H4=y
 CONFIG_MACH_OMAP_APOLLON=y
 CONFIG_MACH_OMAP_2430SDP=y
@@ -294,9 +43,6 @@ CONFIG_MACH_OMAP3517EVM=y
 CONFIG_MACH_OMAP3_PANDORA=y
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
 CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
 CONFIG_MACH_NOKIA_RX51=y
 CONFIG_MACH_OMAP_ZOOM2=y
@@ -306,264 +52,41 @@ CONFIG_MACH_IGEP0020=y
 CONFIG_MACH_SBC3530=y
 CONFIG_MACH_OMAP_3630SDP=y
 CONFIG_MACH_OMAP_4430SDP=y
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -573,1689 +96,197 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
 CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_MESH is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_MENELAUS=y
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_OMAP2_DSS is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_N810 is not set
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
-# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
-# CONFIG_SND_OMAP_SOC_SDP3430 is not set
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
-# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
-# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_TWL4030_USB=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index b02e371b099..3b072e8e71f 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1,1585 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 18 14:01:52 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_SMARTREFLEX=y
-# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
 CONFIG_MACH_OMAP3EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
 CONFIG_FB_OMAP2=y
 # CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 5d08e0b0361..d5a62268937 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -1,1796 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Sat Feb  6 20:25:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
 CONFIG_MACH_OMAP3_PANDORA=y
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_ALS is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
 CONFIG_PANEL_TPO_TD043MTEA1=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-# CONFIG_SHM_SIGNAL is not set
-# CONFIG_IOQ is not set
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
index 83365f075ce..1d1ab0b0b71 100644
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ b/arch/arm/configs/omap3_stalker_lks_defconfig
@@ -1,1691 +1,150 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Mon May 17 16:57:28 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
 CONFIG_MACH_SBC3530=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_OMAP2_DSS is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 968fbaa8f04..e988eccc93a 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -1,475 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Fri Dec  4 16:02:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
-# CONFIG_IPV6_PIMSM_V2 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
@@ -481,33 +97,21 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -516,38 +120,24 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_IP_VS=m
 CONFIG_IP_VS_IPV6=y
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -558,18 +148,8 @@ CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -581,22 +161,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -605,10 +173,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -626,62 +190,19 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -696,15 +217,9 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_DRR=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
@@ -712,20 +227,7 @@ CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -735,10 +237,6 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTSDIO=y
 CONFIG_BT_HCIUART=y
@@ -748,230 +246,38 @@ CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
 CONFIG_BT_HCIBFUSB=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -979,22 +285,15 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1002,44 +301,8 @@ CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-# CONFIG_WIMAX_I2400M_USB is not set
-# CONFIG_WIMAX_I2400M_SDIO is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 # CONFIG_ATM_DRIVERS is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -1050,620 +313,81 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
 CONFIG_BATTERY_BQ27x00=y
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_OXU210HP_HCD=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
 CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
 CONFIG_USB_SERIAL_ARK3116=m
@@ -1671,7 +395,6 @@ CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1707,14 +430,11 @@ CONFIG_USB_SERIAL_MOTOROLA=m
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
 CONFIG_USB_SERIAL_SIEMENS_MPI=m
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1722,441 +442,95 @@ CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_SERIAL_OPTICON=m
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ZERO_HNPTEST=y
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 CONFIG_UIO_PDRV=m
 CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_XATTR=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
 CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2195,183 +569,37 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2379,7 +607,6 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2387,44 +614,8 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index 45b4ebae305..0cf4147a936 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -1,1303 +1,136 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:47:37 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
 # CONFIG_OMAP_MUX_WARNINGS is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
-# CONFIG_ARCH_OMAP2420 is not set
 CONFIG_ARCH_OMAP2430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
 CONFIG_MACH_OMAP_2430SDP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_GPIO=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MENELAUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_OMAP24XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index ddde429a7d9..5dbe595999b 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,1727 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc9-omap1
-# Tue Sep 15 16:48:34 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-# CONFIG_LEDS_OMAP_PWM is not set
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index 609f348b105..8e8f4e94609 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -1,1610 +1,154 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 12:21:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
 CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 1fb04567f6e..63e0c2d50f3 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,1279 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Wed May 12 12:26:05 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_4430SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_LOCAL_TIMERS is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 CONFIG_KS8851=y
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_TWL4030 is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index cc86342896a..0b24858f5d4 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -1,961 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:07:29 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OMAP2 is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 61744e507e4..0e42ba4ede9 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -1,1171 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:20:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index d773857ed0c..5e536cf0f9f 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -1,1177 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:01:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
index 6ec487e6e02..c0867b1d981 100644
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -1,1087 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:02:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_ARTHUR=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AN2720 is not set
 # CONFIG_USB_BELKIN is not set
 # CONFIG_USB_ARMLINUX is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
index 7218b96c0b7..ac08e51180d 100644
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -1,654 +1,37 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:48 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_ROMFS_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 91ef2ed0f80..e2de2aa17e6 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,1339 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2-omap1
-# Wed Feb 20 17:12:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
-CONFIG_OMAP_ARM_60MHZ=y
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 CONFIG_DEBUG_DRIVER=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-CONFIG_SPI_TSC2101=y
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_TEST=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-# CONFIG_OMAP_DSP is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index b12b406c196..858f93aac2b 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -1,1119 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
 CONFIG_MACH_OMAP_H4=y
-# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
-# CONFIG_MACH_OMAP2_H4_USB1 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=y
 CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_OMAP_IR=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-CONFIG_GPIOEXPANDER_OMAP=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_MENELAUS=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index e9c14082125..265af2669ed 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -1,1252 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:02 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-CONFIG_OMAP_PS2=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
index fea9319ed7f..cc7fbf84ddd 100644
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -1,838 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:05 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 0efb4b044ff..c7bb558316d 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -1,1259 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OMAP_LDP=y
-# CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index 556fcca1b1d..9105de7661f 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,1090 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3-omap1
-# Fri Nov 23 12:24:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
-# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_OMAP_CF=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
index 9a15d5da57f..aa777e624e2 100644
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -1,927 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP730=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_PERSEUS2=y
-# CONFIG_MACH_OMAP_FSAMPLE is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_195MHZ is not set
 CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 881faea03d7..0a7ed449cde 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,663 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Fri Jun 12 17:25:46 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_ZOOM2=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -667,879 +73,71 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL4030_POWEROFF is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ZERO=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index 5e55b550a40..f8085b0b9ec 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -1,682 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 13:04:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_OMAP_ZOOM3=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -686,925 +73,83 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 19b91dedc7f..1579857aeea 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,1133 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:18 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_MACH_ONEARM=y
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AT91 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index ee1ebd8dfa8..439323b3b0e 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,225 +1,16 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:30:00 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Orion Implementations
-#
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
@@ -242,1631 +33,147 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
 CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
 # CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index bf06d3660a3..6fa1b14a7a9 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -1,426 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Fri Oct  3 11:50:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OVERO=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -430,209 +61,34 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_93CX6=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -640,64 +96,36 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
 CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
@@ -707,1178 +135,141 @@ CONFIG_USB_NET_RNDIS_HOST=m
 CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
index feffaa2deae..828d7cb9e66 100644
--- a/arch/arm/configs/palmte_defconfig
+++ b/arch/arm/configs/palmte_defconfig
@@ -1,760 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Sat May 19 11:04:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
 CONFIG_MACH_OMAP_PALMTE=y
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_OMAP_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
index 55d5b7dfb7a..31d02c48a3d 100644
--- a/arch/arm/configs/palmtt_defconfig
+++ b/arch/arm/configs/palmtt_defconfig
@@ -1,843 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3-omap1
-# Sun Oct 29 00:36:12 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-CONFIG_OMAP_LL_DEBUG_UART2=y
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
 CONFIG_MACH_OMAP_PALMTT=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_OMAP_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_TSC2102 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OMAP=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_OMAP=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 CONFIG_RTC_DRV_OMAP=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# Synchronous Serial Interfaces (SSI)
-#
-# CONFIG_OMAP_UWIRE is not set
-# CONFIG_OMAP_TSC2101 is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6efc7465a76..c478db6f519 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -1,890 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:13:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-z71"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
 CONFIG_MACH_OMAP_PALMZ71=y
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_TSC2046 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 6d162b137ce..4baa83c1c57 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -1,950 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Sun Aug 24 02:29:27 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
-CONFIG_MACH_PALMZ72=y
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index fa153f2711b..583a0610bd0 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -1,1095 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Dec 21 10:52:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 6e7155c122a..4c9afa478d5 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -1,355 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 16:19:50 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_PICOTUX2XX=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -359,429 +55,70 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
 CONFIG_SENSORS_ADM1029=m
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
@@ -796,440 +133,49 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_PCF8591=m
 CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VT1211 is not set
 CONFIG_SENSORS_W83781D=m
 CONFIG_SENSORS_W83791D=m
 CONFIG_SENSORS_W83792D=m
 CONFIG_SENSORS_W83793=m
 CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=m
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_AT91=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1269,115 +215,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index dbfabb5eede..d1efbdc1e6d 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -1,745 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:03:02 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
 CONFIG_SA1100_PLEB=y
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 2f7b9ce7dad..bd481f04276 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1,272 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Mon Sep 11 13:59:24 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PNX4008=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -277,64 +60,10 @@ CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
 CONFIG_IP6_NF_QUEUE=m
-
-#
-# DECnet: Netfilter Configuration
-#
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -354,42 +83,17 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
 CONFIG_LLC2=m
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -397,23 +101,11 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
 CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -426,303 +118,71 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=m
 CONFIG_MTD_DOC2001=m
 CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_NANDSIM=m
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_SCSI_SATA=m
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_WAN=y
 CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
 CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
 CONFIG_LAPBETHER=m
 CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -738,44 +198,15 @@ CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_VSXXXAA=m
@@ -799,736 +230,187 @@ CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
 CONFIG_JOYSTICK_STINGER=m
-# CONFIG_JOYSTICK_TWIDJOY is not set
 CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_GUNZE=m
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-# CONFIG_DVB_CX24123 is not set
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-# CONFIG_DVB_S5H1420 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-# CONFIG_DVB_ZL10353 is not set
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-
-#
-# Miscellaneous devices
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_USBPCWATCHDOG=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_SL811_HCD=m
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
 CONFIG_USB_SERIAL_IPW=m
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
 CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
 CONFIG_NCPFS_STRONG=y
 CONFIG_NCPFS_NFS_NS=y
 CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
 CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
 CONFIG_ACORN_PARTITION_RISCIX=y
 CONFIG_OSF_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_ATARI_PARTITION=y
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
 CONFIG_SGI_PARTITION=y
 CONFIG_ULTRIX_PARTITION=y
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1567,96 +449,24 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 113511f91eb..74d7e0104f8 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,973 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Tue Jan 12 08:57:10 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910 Implmentations
-#
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
 CONFIG_MACH_AVENGERS_LITE=y
-# CONFIG_MACH_TTC_DKB is not set
-CONFIG_CPU_PXA168=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 3365c5d77ca..917a070b4bb 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -1,796 +1,59 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
 CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 82ca6c80d6a..1677a0607ca 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,1331 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Mon Jul 13 22:48:49 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-CONFIG_CPU_PXA930=y
-CONFIG_CPU_PXA935=y
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-CONFIG_MACH_ZYLONITE=y
 CONFIG_MACH_LITTLETON=y
 CONFIG_MACH_TAVOREVB=y
 CONFIG_MACH_SAAR=y
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_MOUSE_PXA930_TRKBALL=y
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_GPIO_MAX7301=y
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_DA903X=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 94e20fe6dbd..1cd381e1d47 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:45:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_MACH_TAVOREVB=y
-
-#
-# Marvell PXA168/910 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
 CONFIG_MACH_TTC_DKB=y
-CONFIG_CPU_PXA910=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 12d0d64e321..9160f3b7751 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 12:28:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
 CONFIG_MACH_QIL_A9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_AT91_EARLY_DBGU is not set
 CONFIG_AT91_EARLY_USART0=y
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_M41T94=y
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index acb1a8f30e3..f7caa909b40 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -1,1655 +1,164 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 21:57:32 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-CONFIG_CPU_PXA320=y
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
 CONFIG_MACH_RAUMFELD_RC=y
 CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_PROTO=y
 CONFIG_MACH_RAUMFELD_SPEAKER=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_ISL29003=y
 CONFIG_TI_DAC7512=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
 CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 CONFIG_TOUCHSCREEN_EETI=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-CONFIG_W1=m
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
 CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
 CONFIG_BATTERY_DS2760=m
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
 CONFIG_SENSORS_LIS3_SPI=y
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_MAX8660=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-CONFIG_PXA3XX_GCU=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_RAUMFELD_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=y
-# CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA_SOC_SSP=y
 CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AK4104=y
-CONFIG_SND_SOC_CS4270=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
 CONFIG_LEDS_LT3593=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
 CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
 CONFIG_CACHEFILES=y
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFS_FSCACHE=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1688,211 +197,12 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 123701754d4..9312ef9f9bf 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -1,1095 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:41:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
-# CONFIG_MACH_REALVIEW_PB1176 is not set
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index a509a5e59d2..fb75192ee7e 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,1090 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index e9124a00039..af278f7a224 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -1,910 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Mon Aug  6 16:47:24 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ZONE_DMA=y
-CONFIG_FIQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_RPC=y
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_ARCH_ACORN=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM610=y
 CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
-CONFIG_CPU_32v3=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V3=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V3=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V3=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_TIMER_ACORN=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_ARXESCSI=m
 CONFIG_SCSI_CUMANA_2=m
 CONFIG_SCSI_EESOXSCSI=m
 CONFIG_SCSI_POWERTECSCSI=y
-
-#
-# The following drivers are not fully supported
-#
 CONFIG_SCSI_CUMANA_1=m
 CONFIG_SCSI_OAK1=m
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_ICSIDE=y
-# CONFIG_MD is not set
+CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_RISCPC=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_RPCKBD=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_ACORN=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_ACORN=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ACORN=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_VIDC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=y
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=y
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -920,14 +116,8 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
 CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
@@ -937,79 +127,9 @@ CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=m
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 56d4928cd4c..ffaef43ec0b 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1,462 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 15:28:56 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
 CONFIG_MACH_NOKIA_RX51=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -466,753 +61,80 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-
-# Frame buffer hardware drivers
-#
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
 # CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
 # CONFIG_OMAP2_DSS_VENC is not set
 CONFIG_OMAP2_DSS_SDI=y
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
 CONFIG_PANEL_ACX565AKM=y
-
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -1222,645 +144,79 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_USB_G_NOKIA=m
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=m
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 44cea2ddd22..f9096c1b0a6 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,347 +1,31 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Fri May 28 19:15:48 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_PULL_UP=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_ADC=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HWMON=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2443_CLOCK=y
-CONFIG_S3C24XX_DCLK=y
 CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=128
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C24XX_GPIO_EXTRA128=y
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
-CONFIG_S3C24XX_SIMTEC_AUDIO=y
-CONFIG_S3C2410_SETUP_TS=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_SIMTEC_NOR=y
-CONFIG_MACH_BAST_IDE=y
-
-#
-# S3C2410 Machines
-#
 CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
-# CONFIG_H1940BT is not set
-CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_N35=y
 CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
-CONFIG_BAST_PC104_IRQ=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
-CONFIG_CPU_S3C2412=y
-CONFIG_S3C2412_DMA=y
-CONFIG_S3C2412_PM=y
-
-#
-# S3C2412 Machines
-#
 CONFIG_MACH_JIVE=y
-# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
-CONFIG_CPU_S3C2416=y
-CONFIG_S3C2416_DMA=y
-
-#
-# S3C2416 Machines
-#
 CONFIG_MACH_SMDK2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C2440_XTAL_12000000=y
-CONFIG_S3C2440_XTAL_16934400=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 and S3C2442 Machines
-#
 CONFIG_MACH_ANUBIS=y
 CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
@@ -349,236 +33,57 @@ CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2440=y
 CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_MACH_MINI2440=y
 CONFIG_MACH_RX1950=y
-CONFIG_CPU_S3C2443=y
-CONFIG_S3C2443_DMA=y
-
-#
-# S3C2443 Machines
-#
 CONFIG_MACH_SMDK2443=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_HYBLA is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_VENO is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -591,37 +96,13 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -633,14 +114,12 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -656,43 +135,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-# CONFIG_IP_VS_RR is not set
-# CONFIG_IP_VS_WRR is not set
-# CONFIG_IP_VS_LC is not set
-# CONFIG_IP_VS_WLC is not set
-# CONFIG_IP_VS_LBLC is not set
-# CONFIG_IP_VS_LBLCR is not set
-# CONFIG_IP_VS_DH is not set
-# CONFIG_IP_VS_SH is not set
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -704,22 +147,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -728,10 +159,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -749,39 +176,8 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_L2CAP_EXT_FEATURES is not set
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -789,12 +185,6 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -803,428 +193,58 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=m
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
 CONFIG_BLK_DEV_PLATFORM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_HAVE_PATA_PLATFORM=y
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
 CONFIG_JOYSTICK_A3D=m
@@ -1238,9 +258,6 @@ CONFIG_JOYSTICK_INTERACT=m
 CONFIG_JOYSTICK_SIDEWINDER=m
 CONFIG_JOYSTICK_TMDC=m
 CONFIG_JOYSTICK_IFORCE=m
-# CONFIG_JOYSTICK_IFORCE_USB is not set
-# CONFIG_JOYSTICK_IFORCE_232 is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
 CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
@@ -1254,52 +271,9 @@ CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_JOYSTICK_XPAD=m
 CONFIG_JOYSTICK_XPAD_FF=y
 CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
 CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -1307,537 +281,68 @@ CONFIG_INPUT_POWERMATE=m
 CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_PCF50633_PMU is not set
-# CONFIG_INPUT_PCF8574 is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_N_GSM is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2412=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
 CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
-# CONFIG_SPI_S3C24XX_FIQ is not set
 CONFIG_SPI_S3C24XX_GPIO=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_TLE62X0=m
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_CHARGER_PCF50633 is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_S3C is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_TPS65010=m
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-CONFIG_MFD_PCF50633=y
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_PCF50633_ADC is not set
-CONFIG_PCF50633_GPIO=y
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
 CONFIG_SND_USB_CAIAQ=m
-# CONFIG_SND_USB_CAIAQ_INPUT is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-CONFIG_SND_S3C_I2SV2_SOC=m
-CONFIG_SND_S3C2412_SOC_I2S=m
-CONFIG_SND_S3C_SOC_AC97=m
-# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-CONFIG_SND_SOC_WM8750=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_U132_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
 CONFIG_USB_STORAGE_FREECOM=m
 CONFIG_USB_STORAGE_ISD200=m
@@ -1850,73 +355,15 @@ CONFIG_USB_STORAGE_ONETOUCH=m
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_WWAN=m
 CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
@@ -1934,315 +381,64 @@ CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_SDHCI_S3C is not set
 CONFIG_MMC_SPI=m
 CONFIG_MMC_S3C=y
-# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-CONFIG_MMC_S3C_PIO=y
-# CONFIG_MMC_S3C_DMA is not set
-# CONFIG_MMC_S3C_PIODMA is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_DAC124S085=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2802=m
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_PCF50633 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2281,227 +477,13 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2b642386f03..ba6a515086b 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,1538 +1,93 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Fri May 28 19:05:39 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HSMMC2=y
-CONFIG_S3C_DEV_HWMON=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_USB_HSOTG=y
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DEV_RTC=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_S3C_PM_DEBUG_LED_SMDK is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_SAMSUNG_WAKEMASK=y
-CONFIG_PLAT_S3C64XX=y
-CONFIG_CPU_S3C6400=y
-CONFIG_CPU_S3C6410=y
-CONFIG_S3C64XX_DMA=y
-CONFIG_S3C64XX_SETUP_SDHCI=y
-CONFIG_S3C64XX_SETUP_I2C0=y
-CONFIG_S3C64XX_SETUP_I2C1=y
-CONFIG_S3C64XX_SETUP_FB_24BPP=y
-CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
 CONFIG_MACH_SMDK6400=y
 CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
-CONFIG_SMDK6410_SD_CH0=y
-# CONFIG_SMDK6410_SD_CH1 is not set
-# CONFIG_SMDK6410_WM1190_EV1 is not set
-# CONFIG_SMDK6410_WM1192_EV1 is not set
 CONFIG_MACH_NCP=y
 CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ=y
 CONFIG_MACH_SMARTQ5=y
 CONFIG_MACH_SMARTQ7=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C64XX=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C=y
-# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_S3C_SOC_AC97=m
-# CONFIG_SND_S3C64XX_SOC_WM8580 is not set
 CONFIG_SND_SOC_SMDK_WM9713=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9713=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-# CONFIG_HID_CANDO is not set
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-# CONFIG_HID_PRODIKEYS is not set
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
-# CONFIG_MMC_SDHCI_S3C_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
index 532e987beb4..0b0266c6d32 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -1,1012 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:32 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_S5P6440=y
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6440=y
 CONFIG_MACH_SMDK6440=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
index 068219b360f..0e92a784af6 100644
--- a/arch/arm/configs/s5p6442_defconfig
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -1,907 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:34 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
 CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6442=y
 CONFIG_MACH_SMDK6442=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index ebc6245b9fc..41bafc94dd8 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,1026 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
 CONFIG_ARCH_S5PC100=y
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HSMMC2=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PC100=y
-CONFIG_S5PC100_SETUP_FB_24BPP=y
-CONFIG_S5PC100_SETUP_I2C1=y
-CONFIG_S5PC100_SETUP_SDHCI=y
-CONFIG_S5PC100_SETUP_SDHCI_GPIO=y
 CONFIG_MACH_SMDKC100=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
index c4de360b0f6..22c2d147f79 100644
--- a/arch/arm/configs/s5pc110_defconfig
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -1,924 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:37 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_AQUILA is not set
-# CONFIG_MACH_GONI is not set
-# CONFIG_MACH_SMDKV210 is not set
 CONFIG_MACH_SMDKC110=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index e2f5bce2982..1753836d005 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,927 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:39 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_AQUILA is not set
-# CONFIG_MACH_GONI is not set
 CONFIG_MACH_SMDKV210=y
-# CONFIG_MACH_SMDKC110 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 81b290ad5d2..ecf2531523a 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -1,987 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 14 02:01:07 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
 CONFIG_MACH_SAM9_L9260=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=3
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-# CONFIG_MISC_DEVICES is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RTC_DRV_DS1553=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1020,77 +141,8 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index 7c49bc35246..b0b96942f4b 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -1,869 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:26:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
 CONFIG_SA1100_SHANNON=y
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=y
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 46de1247d12..caa07db90cf 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,1248 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git6
-# Thu Jan  8 17:14:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_VIA82C505=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-CONFIG_CS89x0_NOEEPROM=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_KAHLUA is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index ee25e634415..af3b12e3b46 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -1,451 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:10:36 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="oe1"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
 CONFIG_SA1100_SIMPAD=y
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
@@ -455,110 +40,33 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -567,395 +75,37 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=800
-CONFIG_INPUT_TSDEV_SCREEN_Y=600
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig
index 35e64d1cb75..cf29f3e5692 100644
--- a/arch/arm/configs/spear300_defconfig
+++ b/arch/arm/configs/spear300_defconfig
@@ -1,773 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:36:23 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-CONFIG_MACH_SPEAR300=y
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-CONFIG_BOARD_SPEAR300_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig
index cbbfd290bba..824e44418b1 100644
--- a/arch/arm/configs/spear310_defconfig
+++ b/arch/arm/configs/spear310_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
 CONFIG_MACH_SPEAR310=y
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR310_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig
index 2ae3c110a21..842f7f3c512 100644
--- a/arch/arm/configs/spear320_defconfig
+++ b/arch/arm/configs/spear320_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:12 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
 CONFIG_MACH_SPEAR320=y
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR320_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig
index c85a02924ec..6777c11f63e 100644
--- a/arch/arm/configs/spear600_defconfig
+++ b/arch/arm/configs/spear600_defconfig
@@ -1,760 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:26 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-# CONFIG_ARCH_SPEAR3XX is not set
 CONFIG_ARCH_SPEAR6XX=y
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_MACH_SPEAR600=y
-CONFIG_BOARD_SPEAR600_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d894894194..aebd4bb0ad0 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,539 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:25:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -543,18 +74,9 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -563,774 +85,105 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1338,483 +191,85 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index 06a8293c61c..d5e260b8b16 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -1,1456 +1,129 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 17 16:38:03 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
 CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_HAVE_AT91_USART3=y
-CONFIG_HAVE_AT91_USART4=y
-CONFIG_HAVE_AT91_USART5=y
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9G10 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91SAM9G45 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT572D940HF is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
-# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
-# CONFIG_MACH_CPU9G20 is not set
 CONFIG_MACH_PORTUXG20=y
 CONFIG_MACH_STAMP9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
 CONFIG_W1_MASTER_GPIO=y
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
 CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
index b1a3a97d46e..94a2d904bf9 100644
--- a/arch/arm/configs/stmp378x_defconfig
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -1,1140 +1,128 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 02:44:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-# CONFIG_ARCH_STMP37XX is not set
 CONFIG_ARCH_STMP378X=y
-# CONFIG_MACH_STMP37XX is not set
-CONFIG_MACH_STMP378X=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# RDS decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_EVENT_TRACER is not set
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
index a3751c9e141..d8ee58cfa87 100644
--- a/arch/arm/configs/stmp37xx_defconfig
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -1,1001 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.1
-# Mon Apr 20 04:41:26 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-CONFIG_ARCH_STMP37XX=y
-# CONFIG_ARCH_STMP378X is not set
-CONFIG_MACH_STMP37XX=y
-# CONFIG_MACH_STMP378X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_STMP_DBG is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 8a9e7e6bd03..20a861877a3 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -1,1117 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:16:10 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
 CONFIG_MACH_SX1=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_OMAP_AIC23 is not set
-# CONFIG_SND_OMAP_TSC2101 is not set
-CONFIG_SND_SX1=y
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
 CONFIG_NLS_ISO8859_5=y
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index dccf14b4ee0..e89ca19489c 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -1,883 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7-hammer
-# Thu Mar 27 16:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_PLAT_S3C24XX=y
-# CONFIG_S3C2410_DMA is not set
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_TCT_HAMMER=y
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_ETH=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 # CONFIG_PROC_SYSCTL is not set
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 1e8f5a21185..37f48342827 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,409 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon Apr 30 21:23:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
-CONFIG_MACH_TRIZEPS4_CONXS=y
-# CONFIG_MACH_TRIZEPS4_ANY is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -413,370 +57,63 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=y
 CONFIG_MTD_DOC2001=y
 CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE=y
-CONFIG_MTD_DOCECC=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
-# CONFIG_MTD_DOCPROBE_55AA is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_PATA_PLATFORM=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_HERMES=y
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=y
-# CONFIG_ZD1211RW is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_HERMES=y
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -785,920 +122,105 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_PXA=y
 CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 9155196e623..46e5e074726 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,1225 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan  6 00:01:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_TCM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# ST-Ericsson AB U300/U330/U335/U365 Platform
-#
-
-#
-# ST-Ericsson Mobile Platform Products
-#
 CONFIG_MACH_U300=y
-
-#
-# ST-Ericsson U300/U330/U335/U365 Feature Selections
-#
-# CONFIG_MACH_U300_BS2X is not set
-# CONFIG_MACH_U300_BS330 is not set
 CONFIG_MACH_U300_BS335=y
-# CONFIG_MACH_U300_BS365 is not set
-# CONFIG_MACH_U300_SINGLE_RAM is not set
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
-# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
 CONFIG_MACH_U300_SPIDUMMY=y
-
-#
-# All the settings below must match the bootloader's settings
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_STU300=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_PL022=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_COH901327_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-CONFIG_AB3100_CORE=y
-CONFIG_AB3100_OTP=y
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-CONFIG_REGULATOR_AB3100=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_AB3100=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
 CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_COH901318=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 727aff9fe34..be80f037f85 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,679 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Mon Nov 30 11:11:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_ARCH_U8500=y
-CONFIG_PLAT_NOMADIK=y
-CONFIG_HAS_MTU=y
-
-#
-# ST-Ericsson platform type
-#
-
-#
-# ST-Ericsson Multicore Mobile Platforms
-#
-CONFIG_MACH_U8500_MOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PL022=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 87b700e2db8..2e39f38b962 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -1,1141 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:39:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_USB_A9260=y
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 7f018edd248..ee82d09249c 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -1,1133 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:15:19 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
 CONFIG_MACH_USB_A9263=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index a1af0b972c0..0ce710f4750 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,1000 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Mon May  8 20:15:57 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
 CONFIG_MACH_VERSATILE_AB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
 CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_ARMMMCI=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 909887ae524..9d7bf5e0d0f 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -1,1676 +1,174 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 17:12:07 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_ARCH_VIPER=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_PWM=m
-CONFIG_PXA_HAVE_ISA_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_SPARSE_RAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
 CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=m
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 84a72ac222c..70d47dbae6d 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -1,1128 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 09:02:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=".xcep-itech"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLOCK is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
 CONFIG_MACH_XCEP=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
 CONFIG_SENSORS_MAX6650=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 3b627aadeb5..30c537f6108 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -1,1215 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 09:53:59 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
 CONFIG_MACH_YL9200=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=3
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S1D135XX=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
 CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=y
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_FILE_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index fca5ff68ea6..960f65514d8 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -1,2031 +1,189 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Dec  8 20:27:05 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_MACH_ARCOM_ZEUS=y
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_ARCOM_PCMCIA=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PXA_HAVE_ISA_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SOC_COMMON=m
 CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
 CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_P54_COMMON is not set
 CONFIG_RT2X00=m
-# CONFIG_RT2500USB is not set
 CONFIG_RT73USB=m
-# CONFIG_RT2800USB is not set
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=7
 CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_PXA is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=m
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index a0162fa9456..7e79503ab89 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -40,12 +40,12 @@ static inline void atomic_add(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -58,12 +58,12 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -78,12 +78,12 @@ static inline void atomic_sub(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -96,12 +96,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -118,11 +118,11 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
+		"ldrex	%1, [%3]\n"
 		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
+		"teq	%1, %4\n"
+		"strexeq %0, %5, [%3]\n"
+		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
 		    : "cc");
 	} while (res);
@@ -137,12 +137,12 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 	unsigned long tmp, tmp2;
 
 	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
+	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
 	: "r" (addr), "Ir" (mask)
 	: "cc");
 }
@@ -249,7 +249,7 @@ static inline u64 atomic64_read(atomic64_t *v)
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
 	: "=&r" (result)
-	: "r" (&v->counter)
+	: "r" (&v->counter), "Qo" (v->counter)
 	);
 
 	return result;
@@ -260,11 +260,11 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 	u64 tmp;
 
 	__asm__ __volatile__("@ atomic64_set\n"
-"1:	ldrexd	%0, %H0, [%1]\n"
-"	strexd	%0, %2, %H2, [%1]\n"
+"1:	ldrexd	%0, %H0, [%2]\n"
+"	strexd	%0, %3, %H3, [%2]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
-	: "=&r" (tmp)
+	: "=&r" (tmp), "=Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -275,13 +275,13 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_add\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -294,13 +294,13 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -315,13 +315,13 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_sub\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -334,13 +334,13 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -358,12 +358,12 @@ static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
 
 	do {
 		__asm__ __volatile__("@ atomic64_cmpxchg\n"
-		"ldrexd		%1, %H1, [%2]\n"
+		"ldrexd		%1, %H1, [%3]\n"
 		"mov		%0, #0\n"
-		"teq		%1, %3\n"
-		"teqeq		%H1, %H3\n"
-		"strexdeq	%0, %4, %H4, [%2]"
-		: "=&r" (res), "=&r" (oldval)
+		"teq		%1, %4\n"
+		"teqeq		%H1, %H4\n"
+		"strexdeq	%0, %5, %H5, [%3]"
+		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		: "r" (&ptr->counter), "r" (old), "r" (new)
 		: "cc");
 	} while (res);
@@ -381,11 +381,11 @@ static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	strexd	%1, %3, %H3, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	strexd	%1, %4, %H4, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
 	: "r" (&ptr->counter), "r" (new)
 	: "cc");
 
@@ -402,16 +402,16 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
 "	subs	%0, %0, #1\n"
 "	sbc	%H0, %H0, #0\n"
 "	teq	%H0, #0\n"
 "	bmi	2f\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter)
 	: "cc");
 
@@ -429,18 +429,18 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_unless\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	teq	%0, %4\n"
-"	teqeq	%H0, %H4\n"
+"1:	ldrexd	%0, %H0, [%4]\n"
+"	teq	%0, %5\n"
+"	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %5\n"
-"	adc	%H0, %H0, %H5\n"
-"	strexd	%2, %0, %H0, [%3]\n"
+"	adds	%0, %0, %6\n"
+"	adc	%H0, %H0, %H6\n"
+"	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (val), "=&r" (ret), "=&r" (tmp)
+	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (u), "r" (a)
 	: "cc");
 
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 51662feb9f1..6750b8e45a4 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -121,4 +121,8 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 extern void elf_set_personality(const struct elf32_hdr *);
 #define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
 
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
 #endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index f7bd52b1c36..c1062c31710 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -19,6 +19,7 @@
 #define HWCAP_NEON	4096
 #define HWCAP_VFPv3	8192
 #define HWCAP_VFPv3D16	16384
+#define HWCAP_TLS	32768
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index c980156f326..1261b1f928d 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
+#include <asm/system.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -179,25 +180,38 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * IO port primitives for more information.
  */
 #ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+#define readb_relaxed(c) ({ u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
 					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
 					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,__mem_pci(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),__mem_pci(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),__mem_pci(c)))
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 #define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
 #define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
 #define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
 #define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
 #define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
 #define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
@@ -244,13 +258,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * io{read,write}{8,16,32} macros
  */
 #ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 237282f7c76..2721a5814cb 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -7,6 +7,8 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
+#define NR_IRQS_LEGACY	16
+
 /*
  * Use this value to indicate lack of interrupt
  * capability
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index df15a0dc228..8ec9ef5c3c7 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -19,10 +19,26 @@
 
 #ifndef __ASSEMBLY__
 
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ *
+ * Function copies machine registers from @oldregs to @newregs. If @oldregs is
+ * %NULL then current registers are stored there.
+ */
 static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		__asm__ __volatile__ ("stmia %0, {r0 - r15}"
+				      : : "r" (&newregs->ARM_r0));
+		__asm__ __volatile__ ("mrs %0, cpsr"
+				      : "=r" (newregs->ARM_cpsr));
+	}
+}
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index c59842dc7cb..8a0dd18ba64 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -20,6 +20,7 @@ struct machine_desc {
 	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
+	unsigned int		nr_irqs;	/* number of IRQs */
 	unsigned int		phys_io;	/* start of physical io	*/
 	unsigned int		io_pg_offst;	/* byte offset for io 
 						 * page tabe entry	*/
@@ -37,6 +38,7 @@ struct machine_desc {
 	void			(*fixup)(struct machine_desc *,
 					 struct tag *, char **,
 					 struct meminfo *);
+	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 8920b2d6e3b..ce3eee9fe26 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,6 +17,7 @@ struct seq_file;
 /*
  * This is internal.  Do not use it.
  */
+extern unsigned int arch_nr_irqs;
 extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, void *);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 742c2aaeb02..d2fedb5aeb1 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,8 @@ struct map_desc {
 #define MT_MEMORY		9
 #define MT_ROM			10
 #define MT_MEMORY_NONCACHED	11
+#define MT_MEMORY_DTCM		12
+#define MT_MEMORY_ITCM		13
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 52f0da1e97d..16330bd0657 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -46,6 +46,7 @@ struct pci_sys_data {
 					/* IRQ mapping				*/
 	int		(*map_irq)(struct pci_dev *, u8, u8);
 	struct hw_pci	*hw;
+	void		*private_data;	/* platform controller private data	*/
 };
 
 /*
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index f3eabf1ecec..833306ee9e7 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info {
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
+	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
-	u16	gpio_pullup;			/* high == pullup activated */
+	int	gpio_pullup;			/* high == pullup activated */
 };
 
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
new file mode 100644
index 00000000000..fdbc43b2e6c
--- /dev/null
+++ b/arch/arm/include/asm/memblock.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_ARM_MEMBLOCK_H
+#define _ASM_ARM_MEMBLOCK_H
+
+#ifdef CONFIG_MMU
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+struct meminfo;
+struct machine_desc;
+
+extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
+
+#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 4312ee5e3d0..23c2e8e5c0f 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -124,6 +124,15 @@
 #endif /* !CONFIG_MMU */
 
 /*
+ * We fix the TCM memories max 32 KiB ITCM resp DTCM at these
+ * locations
+ */
+#ifdef CONFIG_HAVE_TCM
+#define ITCM_OFFSET	UL(0xfffe0000)
+#define DTCM_OFFSET	UL(0xfffe8000)
+#endif
+
+/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
@@ -158,7 +167,7 @@
 #endif
 
 #ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
+#define arch_adjust_zones(size,holes) do { } while (0)
 #elif !defined(CONFIG_ZONE_DMA)
 #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
 #endif
@@ -234,76 +243,11 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#ifndef CONFIG_DISCONTIGMEM
-
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
 /*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
deleted file mode 100644
index ae63a4fd28c..00000000000
--- a/arch/arm/include/asm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <mach/memory.h>
-
-#endif
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 6a89567ffc5..7bed3daf83b 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -91,7 +91,11 @@ extern void release_thread(struct task_struct *);
 
 unsigned long get_wchan(struct task_struct *p);
 
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax()			smp_mb()
+#else
 #define cpu_relax()			barrier()
+#endif
 
 /*
  * Create a new kernel thread
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 9dcb11e5902..c974be8913a 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -184,6 +184,42 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
 
+/*
+ * kprobe-based event tracer support
+ */
+#include <linux/stddef.h>
+#include <linux/types.h>
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f392fb4437a..f1e5a9bca24 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,8 +201,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	unsigned short node;
-	unsigned short highmem;
+	unsigned int highmem;
 };
 
 struct meminfo {
@@ -212,9 +211,8 @@ struct meminfo {
 
 extern struct meminfo meminfo;
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)	\
-		if ((mi)->bank[iter].node == no)
+#define for_each_bank(iter,mi)				\
+	for (iter = 0; iter < (mi)->nr_banks; iter++)
 
 #define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
 #define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h
new file mode 100644
index 00000000000..de003327be9
--- /dev/null
+++ b/arch/arm/include/asm/stackprotector.h
@@ -0,0 +1,38 @@
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and gcc expects it to be defined by a global variable called
+ * "__stack_chk_guard" on ARM.  This unfortunately means that on SMP
+ * we cannot have a different canary value per task.
+ */
+
+#ifndef _ASM_STACKPROTECTOR_H
+#define _ASM_STACKPROTECTOR_H 1
+
+#include <linux/random.h>
+#include <linux/version.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+	unsigned long canary;
+
+	/* Try to get a semi random initial value. */
+	get_random_bytes(&canary, sizeof(canary));
+	canary ^= LINUX_VERSION_CODE;
+
+	current->stack_canary = canary;
+	__stack_chk_guard = current->stack_canary;
+}
+
+#endif	/* _ASM_STACKPROTECTOR_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 5f4f4800273..8ba1ccf82a0 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -83,7 +83,7 @@ void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
 
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
-		     int sig, const char *name);
+		     int sig, int code, const char *name);
 
 #define xchg(ptr,x) \
 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
new file mode 100644
index 00000000000..e71d6ff8d10
--- /dev/null
+++ b/arch/arm/include/asm/tls.h
@@ -0,0 +1,46 @@
+#ifndef __ASMARM_TLS_H
+#define __ASMARM_TLS_H
+
+#ifdef __ASSEMBLY__
+	.macro set_tls_none, tp, tmp1, tmp2
+	.endm
+
+	.macro set_tls_v6k, tp, tmp1, tmp2
+	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	.endm
+
+	.macro set_tls_v6, tp, tmp1, tmp2
+	ldr	\tmp1, =elf_hwcap
+	ldr	\tmp1, [\tmp1, #0]
+	mov	\tmp2, #0xffff0fff
+	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
+	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+
+	.macro set_tls_software, tp, tmp1, tmp2
+	mov	\tmp1, #0xffff0fff
+	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+#endif
+
+#ifdef CONFIG_TLS_REG_EMUL
+#define tls_emu		1
+#define has_tls_reg		1
+#define set_tls		set_tls_none
+#elif __LINUX_ARM_ARCH__ >= 7 ||					\
+	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
+#define tls_emu		0
+#define has_tls_reg		1
+#define set_tls		set_tls_v6k
+#elif __LINUX_ARM_ARCH__ == 6
+#define tls_emu		0
+#define has_tls_reg		(elf_hwcap & HWCAP_TLS)
+#define set_tls		set_tls_v6
+#else
+#define tls_emu		0
+#define has_tls_reg		0
+#define set_tls		set_tls_software
+#endif
+
+#endif	/* __ASMARM_TLS_H */
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 422f3cc204a..3d5fc41ae8d 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -3,6 +3,8 @@
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
+#include <asm/hwcap.h>
+
 #include "vfp.h"
 
 @ Macros to allow building with old toolkits (with no VFP support)
@@ -22,12 +24,20 @@
 	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
 
 	@ write all the working registers out of the VFP
@@ -38,10 +48,18 @@
 	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 26d302c28e1..980b78e3132 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,10 +13,12 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 # Object file lists.
 
-obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
+obj-y		:= elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
+
 obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
@@ -39,6 +41,7 @@ obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 883511522fc..85f2a019f77 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -40,6 +40,9 @@
 int main(void)
 {
   DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_CC_STACKPROTECTOR
+  DEFINE(TSK_STACK_CANARY,	offsetof(struct task_struct, stack_canary));
+#endif
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c
index 0a1385442f4..925652318b8 100644
--- a/arch/arm/kernel/compat.c
+++ b/arch/arm/kernel/compat.c
@@ -217,10 +217,3 @@ void __init convert_to_tag_list(struct tag *tags)
 	struct param_struct *params = (struct param_struct *)tags;
 	build_tag_list(params, &params->u2);
 }
-
-void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h
index 27e61a68bd1..39264ab1b9c 100644
--- a/arch/arm/kernel/compat.h
+++ b/arch/arm/kernel/compat.h
@@ -9,5 +9,3 @@
 */
 
 extern void convert_to_tag_list(struct tag *tags);
-
-extern void squash_mem_tags(struct tag *tag);
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
new file mode 100644
index 00000000000..cd3b853a8a6
--- /dev/null
+++ b/arch/arm/kernel/crash_dump.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/kernel/crash_dump.c
+ *
+ * Copyright (C) 2010 Nokia Corporation.
+ * Author: Mika Westerberg
+ *
+ * This code is taken from arch/x86/kernel/crash_dump_64.c
+ *   Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *   Copyright (C) IBM Corporation, 2004. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* stores the physical address of elf header of crash image */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is int he user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user(buf, vaddr + offset, csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	iounmap(vaddr);
+	return csize;
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7ee48e7f8f3..bb8e93a7640 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -22,6 +22,7 @@
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
+#include <asm/tls.h>
 
 #include "entry-header.S"
 
@@ -162,8 +163,6 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -204,7 +203,7 @@ __dabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -218,6 +217,9 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -291,7 +293,7 @@ __und_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq
+1:	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -327,7 +329,7 @@ __pabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -393,8 +395,6 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -465,9 +465,6 @@ __irq_usr:
  THUMB(	movne	r0, #0		)
  THUMB(	strne	r0, [r0]	)
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_on
-#endif
 
 	mov	why, #0
 	b	ret_to_user
@@ -739,11 +736,11 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if defined(CONFIG_HAS_TLS_REG)
-	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
-#elif !defined(CONFIG_TLS_REG_EMUL)
-	mov	r4, #0xffff0fff
-	str	r3, [r4, #-15]			@ TLS val at 0xffff0ff0
+	set_tls	r3, r4, r5
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	ldr	r7, [r2, #TI_TASK]
+	ldr	r8, =__stack_chk_guard
+	ldr	r7, [r7, #TSK_STACK_CANARY]
 #endif
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
@@ -753,6 +750,9 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	str	r7, [r8]
+#endif
  THUMB(	mov	ip, r4			   )
 	mov	r0, r5
  ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
@@ -1009,17 +1009,12 @@ kuser_cmpxchg_fixup:
  */
 
 __kuser_get_tls:				@ 0xffff0fe0
-
-#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
-	ldr	r0, [pc, #(16 - 8)]		@ TLS stored at 0xffff0ff0
-#else
-	mrc	p15, 0, r0, c13, c0, 3		@ read TLS register
-#endif
+	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
-
-	.rep	5
-	.word	0			@ pad up to __kuser_helper_version
-	.endr
+	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
+	.rep	4
+	.word	0			@ 0xffff0ff0 software TLS value, then
+	.endr				@ pad up to __kuser_helper_version
 
 /*
  * Reference declaration:
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 3b3d2c80509..c0d5c3b3a76 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -47,12 +47,14 @@
 #define irq_finish(irq) do { } while (0)
 #endif
 
+unsigned int arch_nr_irqs;
 void (*init_arch_irq)(void) __initdata = NULL;
 unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, cpu;
+	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
 
@@ -67,24 +69,25 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
-		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
+	if (i < nr_irqs) {
+		desc = irq_to_desc(i);
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		action = desc->action;
 		if (!action)
 			goto unlock;
 
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
-		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, " %10s", desc->chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 
 		seq_putc(p, '\n');
 unlock:
-		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
@@ -112,7 +115,7 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (unlikely(irq >= NR_IRQS)) {
+	if (unlikely(irq >= nr_irqs)) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Bad IRQ%u\n", irq);
 		ack_bad_irq(irq);
@@ -132,12 +135,12 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	struct irq_desc *desc;
 	unsigned long flags;
 
-	if (irq >= NR_IRQS) {
+	if (irq >= nr_irqs) {
 		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
 		return;
 	}
 
-	desc = irq_desc + irq;
+	desc = irq_to_desc(irq);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
 	if (iflags & IRQF_VALID)
@@ -151,14 +154,25 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 
 void __init init_IRQ(void)
 {
+	struct irq_desc *desc;
 	int irq;
 
-	for (irq = 0; irq < NR_IRQS; irq++)
-		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	for (irq = 0; irq < nr_irqs; irq++) {
+		desc = irq_to_desc_alloc_node(irq, 0);
+		desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	}
 
 	init_arch_irq();
 }
 
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
@@ -178,10 +192,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 void migrate_irqs(void)
 {
 	unsigned int i, cpu = smp_processor_id();
+	struct irq_desc *desc;
 
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_desc *desc = irq_desc + i;
-
+	for_each_irq_desc(i, desc) {
 		if (desc->node == cpu) {
 			unsigned int newcpu = cpumask_any_and(desc->affinity,
 							      cpu_online_mask);
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index da1f94906a4..8bccbfa693f 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -583,13 +583,14 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	union reg_pair fnr;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 	long rdv;
-	long rnv  = regs->uregs[rn];
-	long rmv  = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 598ca61e7bc..1fc74cbd1a1 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -37,12 +37,12 @@ void machine_kexec_cleanup(struct kimage *image)
 {
 }
 
-void machine_shutdown(void)
-{
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+	crash_save_cpu(regs, smp_processor_id());
+
+	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
 
 void machine_kexec(struct kimage *image)
@@ -74,7 +74,11 @@ void machine_kexec(struct kimage *image)
 			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
-	cpu_proc_fin();
+	local_irq_disable();
+	local_fiq_disable();
 	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+	flush_cache_all();
+	cpu_proc_fin();
+	flush_cache_all();
 	cpu_reset(reboot_code_buffer_phys);
 }
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index c45768614c8..de12536d687 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -201,7 +201,7 @@ armpmu_event_update(struct perf_event *event,
 {
 	int shift = 64 - 32;
 	s64 prev_raw_count, new_raw_count;
-	s64 delta;
+	u64 delta;
 
 again:
 	prev_raw_count = atomic64_read(&hwc->prev_count);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index acf5e6fdb6d..401e38be1f7 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,7 +28,9 @@
 #include <linux/tick.h>
 #include <linux/utsname.h>
 #include <linux/uaccess.h>
+#include <linux/random.h>
 
+#include <asm/cacheflush.h>
 #include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -36,6 +38,12 @@
 #include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
 static const char *processor_modes[] = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
@@ -84,10 +92,9 @@ __setup("hlt", hlt_setup);
 
 void arm_machine_restart(char mode, const char *cmd)
 {
-	/*
-	 * Clean and disable cache, and turn off interrupts
-	 */
-	cpu_proc_fin();
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
 
 	/*
 	 * Tell the mm system that we are going to reboot -
@@ -96,6 +103,15 @@ void arm_machine_restart(char mode, const char *cmd)
 	 */
 	setup_mm_for_reboot(mode);
 
+	/* Clean and invalidate caches */
+	flush_cache_all();
+
+	/* Turn off caching */
+	cpu_proc_fin();
+
+	/* Push out any further dirty data, and ensure cache is empty */
+	flush_cache_all();
+
 	/*
 	 * Now call the architecture specific reboot code.
 	 */
@@ -189,19 +205,29 @@ int __init reboot_setup(char *str)
 
 __setup("reboot=", reboot_setup);
 
-void machine_halt(void)
+void machine_shutdown(void)
 {
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
 }
 
+void machine_halt(void)
+{
+	machine_shutdown();
+	while (1);
+}
 
 void machine_power_off(void)
 {
+	machine_shutdown();
 	if (pm_power_off)
 		pm_power_off();
 }
 
 void machine_restart(char *cmd)
 {
+	machine_shutdown();
 	arm_pm_restart(reboot_mode, cmd);
 }
 
@@ -351,17 +377,21 @@ EXPORT_SYMBOL(dump_fpu);
 
 /*
  * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function.  r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
  */
 extern void kernel_thread_helper(void);
 asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
-"	mov	r0, r1\n"
-"	mov	lr, r3\n"
-"	mov	pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+"	bl	trace_hardirqs_on\n"
+#endif
+"	msr	cpsr_c, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
 "	.popsection");
 
@@ -391,11 +421,12 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 	memset(&regs, 0, sizeof(regs));
 
-	regs.ARM_r1 = (unsigned long)arg;
-	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r4 = (unsigned long)arg;
+	regs.ARM_r5 = (unsigned long)fn;
+	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
@@ -421,3 +452,9 @@ unsigned long get_wchan(struct task_struct *p)
 	} while (count ++ < 16);
 	return 0;
 }
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3f562a7c0a9..f99d489822d 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -52,6 +52,102 @@
 #define BREAKINST_THUMB	0xde01
 #endif
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) \
+	{.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(lr),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(cpsr),
+	REG_OFFSET_NAME(ORIG_r0),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 /*
  * this routine will get a word off of the processes privileged stack.
  * the offset is how far from the base addr as stored in the THREAD.
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 61930eb0902..fd26f8d6515 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -10,6 +10,12 @@ relocate_new_kernel:
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
 
+	/*
+	 * If there is no indirection page (we are doing crashdumps)
+	 * skip any relocation.
+	 */
+	cmp	r0, #0
+	beq	2f
 
 0:	/* top, read another word for the indirection page */
 	ldr	r3, [r0],#4
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 122d999bdc7..d5231ae7355 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -19,12 +19,15 @@
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
 #include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
+#include <linux/memblock.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -44,7 +47,9 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 #include "compat.h"
+#endif
 #include "atags.h"
 #include "tcm.h"
 
@@ -269,6 +274,21 @@ static void __init cacheid_init(void)
 extern struct proc_info_list *lookup_processor_type(unsigned int);
 extern struct machine_desc *lookup_machine_type(unsigned int);
 
+static void __init feat_v6_fixup(void)
+{
+	int id = read_cpuid_id();
+
+	if ((id & 0xff0f0000) != 0x41070000)
+		return;
+
+	/*
+	 * HWCAP_TLS is available only on 1136 r1p0 and later,
+	 * see also kuser_get_tls_init.
+	 */
+	if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
+		elf_hwcap &= ~HWCAP_TLS;
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
@@ -311,6 +331,8 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~HWCAP_THUMB;
 #endif
 
+	feat_v6_fixup();
+
 	cacheid_init();
 	cpu_proc_init();
 }
@@ -402,13 +424,12 @@ static int __init arm_add_memory(unsigned long start, unsigned long size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 	bank->size  = size & PAGE_MASK;
-	bank->node  = PHYS_TO_NID(start);
 
 	/*
 	 * Check whether this memory region has non-zero size or
 	 * invalid node number.
 	 */
-	if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+	if (bank->size == 0)
 		return -EINVAL;
 
 	meminfo.nr_banks++;
@@ -663,6 +684,86 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long total;
+
+	total = max_low_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+/**
+ * reserve_crashkernel() - reserves memory are for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by a dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	unsigned long long total_mem;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret)
+		return;
+
+	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+	if (ret < 0) {
+		printk(KERN_WARNING "crashkernel reservation failed - "
+		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+		return;
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+	       "for crashkernel (System RAM: %ldMB)\n",
+	       (unsigned long)(crash_size >> 20),
+	       (unsigned long)(crash_base >> 20),
+	       (unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
+}
+#else
+static inline void reserve_crashkernel(void) {}
+#endif /* CONFIG_KEXEC */
+
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif /* CONFIG_CRASH_DUMP */
+
+static void __init squash_mem_tags(struct tag *tag)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM)
+			tag->hdr.tag = ATAG_NONE;
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct tag *tags = (struct tag *)&init_tags;
@@ -683,12 +784,14 @@ void __init setup_arch(char **cmdline_p)
 	else if (mdesc->boot_params)
 		tags = phys_to_virt(mdesc->boot_params);
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*
 	 * If we have the old style parameters, convert them to
 	 * a tag list.
 	 */
 	if (tags->hdr.tag != ATAG_CORE)
 		convert_to_tag_list(tags);
+#endif
 	if (tags->hdr.tag != ATAG_CORE)
 		tags = (struct tag *)&init_tags;
 
@@ -716,12 +819,15 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	arm_memblock_init(&meminfo, mdesc);
+
 	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
 	smp_init_cpus();
 #endif
+	reserve_crashkernel();
 
 	cpu_init();
 	tcm_init();
@@ -729,6 +835,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * Set up various architecture-specific pointers
 	 */
+	arch_nr_irqs = mdesc->nr_irqs;
 	init_arch_irq = mdesc->init_irq;
 	system_timer = mdesc->timer;
 	init_machine = mdesc->init_machine;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b8c3d0f689d..40dc74f2b27 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -429,7 +429,11 @@ static void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
+#else
+#define smp_timer_broadcast	NULL
+#endif
 
+#ifndef CONFIG_LOCAL_TIMERS
 static void broadcast_timer_set_mode(enum clock_event_mode mode,
 	struct clock_event_device *evt)
 {
@@ -444,7 +448,6 @@ static void local_timer_setup(struct clock_event_device *evt)
 	evt->rating	= 400;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
-	evt->broadcast	= smp_timer_broadcast;
 
 	clockevents_register_device(evt);
 }
@@ -456,6 +459,7 @@ void __cpuinit percpu_timer_setup(void)
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
 	evt->cpumask = cpumask_of(cpu);
+	evt->broadcast = smp_timer_broadcast;
 
 	local_timer_setup(evt);
 }
@@ -467,10 +471,13 @@ static DEFINE_SPINLOCK(stop_lock);
  */
 static void ipi_cpu_stop(unsigned int cpu)
 {
-	spin_lock(&stop_lock);
-	printk(KERN_CRIT "CPU%u: stopping\n", cpu);
-	dump_stack();
-	spin_unlock(&stop_lock);
+	if (system_state == SYSTEM_BOOTING ||
+	    system_state == SYSTEM_RUNNING) {
+		spin_lock(&stop_lock);
+		printk(KERN_CRIT "CPU%u: stopping\n", cpu);
+		dump_stack();
+		spin_unlock(&stop_lock);
+	}
 
 	set_cpu_online(cpu, false);
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 7c5f0c024db..35882fbf37f 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -132,7 +132,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	twd_calibrate_rate();
 
 	clk->name = "local_timer";
-	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+			CLOCK_EVT_FEAT_C3STOP;
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index e50303868f1..26685c2f7a4 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -13,38 +13,35 @@
 #include <linux/ioport.h>
 #include <linux/genalloc.h>
 #include <linux/string.h> /* memcpy */
-#include <asm/page.h> /* PAGE_SHIFT */
 #include <asm/cputype.h>
 #include <asm/mach/map.h>
 #include <mach/memory.h>
 #include "tcm.h"
 
-/* Scream and warn about misuse */
-#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
-    !defined(DTCM_OFFSET) || !defined(DTCM_END)
-#error "TCM support selected but offsets not defined!"
-#endif
-
 static struct gen_pool *tcm_pool;
 
 /* TCM section definitions from the linker */
 extern char __itcm_start, __sitcm_text, __eitcm_text;
 extern char __dtcm_start, __sdtcm_data, __edtcm_data;
 
+/* These will be increased as we run */
+u32 dtcm_end = DTCM_OFFSET;
+u32 itcm_end = ITCM_OFFSET;
+
 /*
  * TCM memory resources
  */
 static struct resource dtcm_res = {
 	.name = "DTCM RAM",
 	.start = DTCM_OFFSET,
-	.end = DTCM_END,
+	.end = DTCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
 static struct resource itcm_res = {
 	.name = "ITCM RAM",
 	.start = ITCM_OFFSET,
-	.end = ITCM_END,
+	.end = ITCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
@@ -52,8 +49,8 @@ static struct map_desc dtcm_iomap[] __initdata = {
 	{
 		.virtual	= DTCM_OFFSET,
 		.pfn		= __phys_to_pfn(DTCM_OFFSET),
-		.length		= (DTCM_END - DTCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_DTCM
 	}
 };
 
@@ -61,8 +58,8 @@ static struct map_desc itcm_iomap[] __initdata = {
 	{
 		.virtual	= ITCM_OFFSET,
 		.pfn		= __phys_to_pfn(ITCM_OFFSET),
-		.length		= (ITCM_END - ITCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_ITCM
 	}
 };
 
@@ -93,14 +90,24 @@ void tcm_free(void *addr, size_t len)
 }
 EXPORT_SYMBOL(tcm_free);
 
-
-static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
+				  u32 *offset)
 {
 	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
 				    256, 512, 1024, -1, -1, -1, -1 };
 	u32 tcm_region;
 	int tcm_size;
 
+	/*
+	 * If there are more than one TCM bank of this type,
+	 * select the TCM bank to operate on in the TCM selection
+	 * register.
+	 */
+	if (banks > 1)
+		asm("mcr	p15, 0, %0, c9, c2, 0"
+		    : /* No output operands */
+		    : "r" (bank));
+
 	/* Read the special TCM region register c9, 0 */
 	if (!type)
 		asm("mrc	p15, 0, %0, c9, c1, 0"
@@ -111,26 +118,24 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 
 	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
 	if (tcm_size < 0) {
-		pr_err("CPU: %sTCM of unknown size!\n",
-			type ? "I" : "D");
+		pr_err("CPU: %sTCM%d of unknown size\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
+	} else if (tcm_size > 32) {
+		pr_err("CPU: %sTCM%d larger than 32k found\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
 	} else {
-		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+		pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n",
 			type ? "I" : "D",
+			bank,
 			tcm_size,
 			(tcm_region & 0xfffff000U),
 			(tcm_region & 1) ? "" : "not ");
 	}
 
-	if (tcm_size != expected_size) {
-		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
-		       type ? "I" : "D",
-		       tcm_size,
-		       expected_size);
-		/* Adjust to the expected size? what can we do... */
-	}
-
 	/* Force move the TCM bank to where we want it, enable */
-	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+	tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
 
 	if (!type)
 		asm("mcr	p15, 0, %0, c9, c1, 0"
@@ -141,10 +146,15 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 		    : /* No output operands */
 		    : "r" (tcm_region));
 
-	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
-		 type ? "I" : "D",
-		 tcm_size,
-		 (tcm_region & 0xfffff000U));
+	/* Increase offset */
+	*offset += (tcm_size << 10);
+
+	pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n",
+		type ? "I" : "D",
+		bank,
+		tcm_size,
+		(tcm_region & 0xfffff000U));
+	return 0;
 }
 
 /*
@@ -153,34 +163,52 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 void __init tcm_init(void)
 {
 	u32 tcm_status = read_cpuid_tcmstatus();
+	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
+	u8 itcm_banks = (tcm_status & 0x03);
 	char *start;
 	char *end;
 	char *ram;
+	int ret;
+	int i;
 
 	/* Setup DTCM if present */
-	if (tcm_status & (1 << 16)) {
-		setup_tcm_bank(0, DTCM_OFFSET,
-			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+	if (dtcm_banks > 0) {
+		for (i = 0; i < dtcm_banks; i++) {
+			ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
+			if (ret)
+				return;
+		}
+		dtcm_res.end = dtcm_end - 1;
 		request_resource(&iomem_resource, &dtcm_res);
+		dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
 		iotable_init(dtcm_iomap, 1);
 		/* Copy data from RAM to DTCM */
 		start = &__sdtcm_data;
 		end   = &__edtcm_data;
 		ram   = &__dtcm_start;
+		/* This means you compiled more code than fits into DTCM */
+		BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
 	}
 
 	/* Setup ITCM if present */
-	if (tcm_status & 1) {
-		setup_tcm_bank(1, ITCM_OFFSET,
-			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+	if (itcm_banks > 0) {
+		for (i = 0; i < itcm_banks; i++) {
+			ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
+			if (ret)
+				return;
+		}
+		itcm_res.end = itcm_end - 1;
 		request_resource(&iomem_resource, &itcm_res);
+		itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
 		iotable_init(itcm_iomap, 1);
 		/* Copy code from RAM to ITCM */
 		start = &__sitcm_text;
 		end   = &__eitcm_text;
 		ram   = &__itcm_start;
+		/* This means you compiled more code than fits into ITCM */
+		BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
 	}
@@ -208,10 +236,10 @@ static int __init setup_tcm_pool(void)
 	pr_debug("Setting up TCM memory pool\n");
 
 	/* Add the rest of DTCM to the TCM pool */
-	if (tcm_status & (1 << 16)) {
-		if (dtcm_pool_start < DTCM_END) {
+	if (tcm_status & (0x03 << 16)) {
+		if (dtcm_pool_start < dtcm_end) {
 			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
-					   DTCM_END - dtcm_pool_start + 1, -1);
+					   dtcm_end - dtcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU DTCM: could not add DTCM " \
 				       "remainder to pool!\n");
@@ -219,16 +247,16 @@ static int __init setup_tcm_pool(void)
 			}
 			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_end - dtcm_pool_start,
 				 dtcm_pool_start);
 		}
 	}
 
 	/* Add the rest of ITCM to the TCM pool */
-	if (tcm_status & 1) {
-		if (itcm_pool_start < ITCM_END) {
+	if (tcm_status & 0x03) {
+		if (itcm_pool_start < itcm_end) {
 			ret = gen_pool_add(tcm_pool, itcm_pool_start,
-					   ITCM_END - itcm_pool_start + 1, -1);
+					   itcm_end - itcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU ITCM: could not add ITCM " \
 				       "remainder to pool!\n");
@@ -236,7 +264,7 @@ static int __init setup_tcm_pool(void)
 			}
 			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 ITCM_END - itcm_pool_start + 1,
+				 itcm_end - itcm_pool_start,
 				 itcm_pool_start);
 		}
 	}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 1621e5327b2..cda78d59aa3 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
+#include <asm/tls.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -518,17 +519,20 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 
 	case NR(set_tls):
 		thread->tp_value = regs->ARM_r0;
-#if defined(CONFIG_HAS_TLS_REG)
-		asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) );
-#elif !defined(CONFIG_TLS_REG_EMUL)
-		/*
-		 * User space must never try to access this directly.
-		 * Expect your app to break eventually if you do so.
-		 * The user helper at 0xffff0fe0 must be used instead.
-		 * (see entry-armv.S for details)
-		 */
-		*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-#endif
+		if (tls_emu)
+			return 0;
+		if (has_tls_reg) {
+			asm ("mcr p15, 0, %0, c13, c0, 3"
+				: : "r" (regs->ARM_r0));
+		} else {
+			/*
+			 * User space must never try to access this directly.
+			 * Expect your app to break eventually if you do so.
+			 * The user helper at 0xffff0fe0 must be used instead.
+			 * (see entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
+		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
@@ -743,6 +747,16 @@ void __init trap_init(void)
 	return;
 }
 
+static void __init kuser_get_tls_init(unsigned long vectors)
+{
+	/*
+	 * vectors + 0xfe0 = __kuser_get_tls
+	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
+	 */
+	if (tls_emu || has_tls_reg)
+		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+}
+
 void __init early_trap_init(void)
 {
 	unsigned long vectors = CONFIG_VECTORS_BASE;
@@ -761,6 +775,11 @@ void __init early_trap_init(void)
 	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
 	/*
+	 * Do processor specific fixups for the kuser helpers
+	 */
+	kuser_get_tls_init(vectors);
+
+	/*
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.
 	 */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 030ba7219f4..59ff42ddf0a 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_L7200)	+= io-acorn.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 59ff6fdc1e6..7d08b43d2c0 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -71,7 +71,7 @@
 		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
-		ldr	r5, [fp, #4]		@ *err_ptr
+		ldr	r5, [sp, #8*4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index c00822543d9..4f93c567a35 100644
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -14,14 +14,4 @@
 
 #define PHYS_OFFSET	UL(0xf0000000)
 
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841eaf8f27e..939bccd7056 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -366,6 +366,17 @@ config MACH_STAMP9G20
 
 endif
 
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
 # ----------------------------------------------------------
 
 if ARCH_AT91SAM9G45
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c1f821e5822..ca2ac003f41 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
+
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 85166b7e69a..753c0d31a3d 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -176,6 +177,13 @@ static struct clk mmc1_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+	.name		= "vdec_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
 /* One additional fake clock for ohci */
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
@@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+		clk_register(&vdec_clk);
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a4102d72cc9..c49f5c003ee 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -26,6 +26,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -256,6 +299,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c11fd47aec5..6ea9808b886 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -27,6 +27,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
         {
@@ -294,6 +337,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
new file mode 100644
index 00000000000..2c08ae4ad3a
--- /dev/null
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ *  Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon  <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+	at91sam9260_initialize(18432000);
+
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+	at91_set_serial_console(0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+	.vbus_pin		= SNAPPER9260_IO_EXP_GPIO(5),
+	.vbus_active_low	= 1,
+	.vbus_polled		= 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+	.is_rmii	= 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+	{
+		.name	= "Preboot",
+		.offset	= 0,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Bootloader",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	},
+	{
+		.name	= "Environment",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4M,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+	return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.partition_info	= snapper9260_nand_partition_info,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 5,
+	.nrd_pulse		= 2,
+	.ncs_write_pulse	= 5,
+	.nwe_pulse		= 2,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+				   AT91_SMC_EXNWMODE_DISABLE),
+	.tdf_cycles		= 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+	.gpio_base		= SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+	{
+		/* IO expander */
+		I2C_BOARD_INFO("max7312", 0x28),
+		.platform_data = &snapper9260_io_expander_data,
+	},
+	{
+		/* Audio codec */
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+	{
+		/* RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+	at91_set_A_periph(AT91_PIN_PC14, 0);
+	sam9_smc_configure(3, &snapper9260_nand_smc_config);
+	at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+	at91_add_device_i2c(snapper9260_i2c_devices,
+			    ARRAY_SIZE(snapper9260_i2c_devices));
+	at91_add_device_serial();
+	at91_add_device_usbh(&snapper9260_usbh_data);
+	at91_add_device_udc(&snapper9260_udc_data);
+	at91_add_device_eth(&snapper9260_macb_data);
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+						 ATMEL_SSC_TD | ATMEL_SSC_RD));
+	snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= snapper9260_map_io,
+	.init_irq	= snapper9260_init_irq,
+	.init_machine	= snapper9260_board_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index d8c1ededaa7..9c6af973748 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -84,7 +84,7 @@
  */
 #define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index 1499b1cbffd..976f4a6c335 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -15,7 +15,7 @@
 #ifndef AT91CAP9_DDRSDR_H
 #define AT91CAP9_DDRSDR_H
 
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
 #define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_DDRSDRC_MODE_NORMAL		0
 #define			AT91_DDRSDRC_MODE_NOP		1
@@ -25,10 +25,10 @@
 #define			AT91_DDRSDRC_MODE_EXT_LMR	5
 #define			AT91_DDRSDRC_MODE_DEEP		6
 
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
 #define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
 #define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
 #define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
@@ -49,7 +49,7 @@
 #define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
 
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
 #define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
 #define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
@@ -59,13 +59,13 @@
 #define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
 #define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
 #define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -80,14 +80,14 @@
 #define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
@@ -98,5 +98,11 @@
 #define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
 #define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 43c396b9b4c..4e79036d3b8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -84,7 +84,7 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 87de8be1748..2b561851812 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,7 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
new file mode 100644
index 00000000000..d27b15ba8eb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *	Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0x7 << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL	0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define			AT91_DDRSDRC_NR_14	(3 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
+#define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
+#define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
+#define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT	(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+#define		AT91_DDRSDRC_APDE	(1 << 16)	 /* Active power down exit time */
+#define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+#define			AT91_DDRSDRC_MD_DDR2		6
+#define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
+#define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
+#define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
+
+#define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
+#define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
+#define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
+#define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index b7260389f7c..100f5a59292 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -17,7 +17,7 @@
 #define AT91SAM9_SDRAMC_H
 
 /* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR		0x00	/* SDRAM Controller Mode Register */
 #define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_SDRAMC_MODE_NORMAL		0
 #define			AT91_SDRAMC_MODE_NOP		1
@@ -27,10 +27,10 @@
 #define			AT91_SDRAMC_MODE_EXT_LMR	5
 #define			AT91_SDRAMC_MODE_DEEP		6
 
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR		0x04	/* SDRAM Controller Refresh Timer Register */
 #define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR		0x08	/* SDRAM Controller Configuration Register */
 #define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_SDRAMC_NC_8	(0 << 0)
 #define			AT91_SDRAMC_NC_9	(1 << 0)
@@ -57,7 +57,7 @@
 #define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
 #define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
 
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR		0x10	/* SDRAM Controller Low Power Register */
 #define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_SDRAMC_LPCB_DISABLE		0
 #define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
@@ -71,16 +71,21 @@
 #define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER		0x14	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		0x18	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		0x1C	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		0x20	/* SDRAM Controller Interrupt Status Register */
 #define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
 
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR		0x24	/* SDRAM Memory Device Register */
 #define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_SDRAMC##num + reg, value)
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index fc2de6c09c8..87ba8517ad9 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -74,7 +74,7 @@
  */
 #define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index df2ed848c9f..58528aa9c8a 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,6 +44,8 @@
  /* USB Device */
 struct at91_udc_data {
 	u8	vbus_pin;		/* high == host powering us */
+	u8	vbus_active_low;	/* vbus polarity */
+	u8	vbus_polled;		/* Use polling, not interrupt */
 	u8	pullup_pin;		/* active == D+ pulled up */
 	u8	pullup_active_low;	/* true == pullup_pin is active low */
 };
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 833659d1200..3bef931d0b1 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void)
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
 static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void)
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
 #else
 #define cpu_is_at91sam9g45()	(0)
 #define cpu_is_at91sam9g45es()	(0)
+#define cpu_is_at91sam9m10()	(0)
+#define cpu_is_at91sam9g46()	(0)
+#define cpu_is_at91sam9m11()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 04c91e31c9c..bfdd8ab26dc 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -19,6 +19,7 @@
 #define PIN_BASE		NR_AIC_IRQS
 
 #define MAX_GPIO_BANKS		5
+#define NR_BUILTIN_GPIO		(PIN_BASE + (MAX_GPIO_BANKS * 32))
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 08322c44df1..8c87d0c1b8f 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	/* Those tow values allow us to delay self-refresh activation
+	 * to the maximum. */
+	u32 lpr0, lpr1;
+	u32 saved_lpr0;
+
+	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+	return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0)	\
+	do { \
+		at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+	} while (0)
 
 #else
 #include <mach/at91sam9_sdramc.h>
@@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void)
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define	AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
 
 	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
 
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 9c5b48e68a7..b6b00a1f612 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,10 +16,12 @@
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
 #endif
@@ -30,7 +32,6 @@
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -113,12 +114,14 @@ ENTRY(at91_slow_clock)
 	/*
 	 * Register usage:
 	 *  R1 = Base address of AT91_PMC
-	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
 	 *  R3 = temporary register
 	 *  R4 = temporary register
+	 *  R5 = Base address of second RAM Controller or 0 if not present
 	 */
 	ldr	r1, .at91_va_base_pmc
 	ldr	r2, .at91_va_base_sdramc
+	ldr	r5, .at91_va_base_ramc1
 
 	/* Drain write buffer */
 	mcr	p15, 0, r0, c7, c10, 4
@@ -127,20 +130,33 @@ ENTRY(at91_slow_clock)
 	/* Put SDRAM in self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-	str	r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 
-	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	/* prepare for DDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, #AT91_DDRSDRC_LPCB
+	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
+	strne	r4, .saved_sam9_lpr1
+	bicne	r4, #AT91_DDRSDRC_LPCB
+	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
 #else
 	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
 	str	r3, .saved_sam9_lpr
 
-	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	bic	r3, #AT91_SDRAMC_LPCB
+	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Save Master clock setting */
@@ -247,14 +263,21 @@ ENTRY(at91_slow_clock)
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, .saved_sam9_lpr1
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
+
 #else
-	/* Restore LPR on AT91SAM9 */
+	/* Restore LPR on AT91 with SDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Restore registers, and return */
@@ -273,18 +296,29 @@ ENTRY(at91_slow_clock)
 .saved_sam9_lpr:
 	.word 0
 
+.saved_sam9_lpr1:
+	.word 0
+
 .at91_va_base_pmc:
 	.word AT91_VA_BASE_SYS + AT91_PMC
 
 #ifdef CONFIG_ARCH_AT91RM9200
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
 #else
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+	.word 0
 #endif
 
 ENTRY(at91_slow_clock_sz)
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 72e405df0fb..d3f959e92b2 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -91,14 +91,23 @@ static struct clk uart_clk = {
 	.parent = &pll1_clk,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name = "BUSCLK",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+};
+
 static struct clk_lookup lookups[] = {
-	{			/* UART0 */
-	 .dev_id = "uarta",
-	 .clk = &uart_clk,
-	 }, {			/* UART1 */
-	     .dev_id = "uartb",
-	     .clk = &uart_clk,
-	     }
+	{			/* Bus clock */
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	}, {			/* UART0 */
+		.dev_id = "uarta",
+		.clk = &uart_clk,
+	}, {			/* UART1 */
+		.dev_id = "uartb",
+		.clk = &uart_clk,
+	}
 };
 
 static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index dbaae5f746a..eb34bd1251d 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -30,7 +30,6 @@ config ARCH_CLEP7312
 config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
 	help
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 09fb57e4521..3c3bf45039f 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -32,7 +32,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 0x01000000;
-	mi->bank[0].node = 0;
 }
 
 
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index dc81cc68595..4a7a2322979 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
+#include <linux/memblock.h>
 #include <linux/types.h>
 #include <linux/string.h>
 
@@ -29,6 +30,12 @@
 
 extern void edb7211_map_io(void);
 
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
 static void __init
 fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	      char **cmdline, struct meminfo *mi)
@@ -43,10 +50,8 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	 */
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 8*1024*1024;
-	mi->bank[0].node = 0;
 	mi->bank[1].start = 0xc1000000;
 	mi->bank[1].size = 8*1024*1024;
-	mi->bank[1].node = 1;
 	mi->nr_banks = 2;
 }
 
@@ -57,6 +62,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
+	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 7430e4049d8..a696099aa4f 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -39,7 +39,6 @@ struct meminfo memmap = {
 		{
 			.start	= 0xC0000000,
 			.size	= 0x01000000,
-			.node	= 0
 		},
 	},
 };
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index fedd8076a68..072cc6b61ba 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,6 +11,7 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rx, tmp
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index f70d52be48a..f45c8e892cb 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -20,7 +20,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
 /*
  * Physical DRAM offset.
  */
@@ -72,7 +71,6 @@
  * 	node 2:  0xd0000000 - 0xd7ffffff
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
-#define NODE_MEM_SIZE_BITS	24
 #define SECTION_SIZE_BITS	24
 #define MAX_PHYSMEM_BITS	32
 
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
index 427507a2d69..11033f1c2e2 100644
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -1,2 +1,3 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
+obj-$(CONFIG_PCI)			+= pcie.o
 obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 2e30c828874..9df8391fd78 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -32,6 +32,7 @@
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
 #include "core.h"
+#include "devices.h"
 
 /*
  * NOR Flash
@@ -117,6 +118,9 @@ static void __init cns3420_init(void)
 {
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
+	cns3xxx_ahci_init();
+	cns3xxx_sdhci_init();
+
 	pm_power_off = cns3xxx_power_off;
 }
 
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
new file mode 100644
index 00000000000..50b4d31c27c
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -0,0 +1,111 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+#include "devices.h"
+
+/*
+ * AHCI
+ */
+static struct resource cns3xxx_ahci_resource[] = {
+	[0] = {
+		.start	= CNS3XXX_SATA2_BASE,
+		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CNS3XXX_SATA,
+		.end	= IRQ_CNS3XXX_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_ahci_pdev = {
+	.name		= "ahci",
+	.id		= 0,
+	.resource	= cns3xxx_ahci_resource,
+	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
+	.dev		= {
+		.dma_mask		= &cns3xxx_ahci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init cns3xxx_ahci_init(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(MISC_SATA_POWER_MODE);
+	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+	__raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+	/* Enable SATA PHY */
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+	/* Enable SATA Clock */
+	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+	/* De-Asscer SATA Reset */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+
+	platform_device_register(&cns3xxx_ahci_pdev);
+}
+
+/*
+ * SDHCI
+ */
+static struct resource cns3xxx_sdhci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_SDIO_BASE,
+		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_SDIO,
+		.end   = IRQ_CNS3XXX_SDIO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cns3xxx_sdhci_pdev = {
+	.name		= "sdhci-cns3xxx",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
+	.resource	= cns3xxx_sdhci_resources,
+};
+
+void __init cns3xxx_sdhci_init(void)
+{
+	u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014);
+	u32 gpioa_pins = __raw_readl(gpioa);
+
+	/* MMC/SD pins share with GPIOA */
+	gpioa_pins |= 0x1fff0004;
+	__raw_writel(gpioa_pins, gpioa);
+
+	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+
+	platform_device_register(&cns3xxx_sdhci_pdev);
+}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
new file mode 100644
index 00000000000..27e15a10aa8
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.h
@@ -0,0 +1,20 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_DEVICES_H_
+#define __CNS3XXX_DEVICES_H_
+
+void __init cns3xxx_ahci_init(void);
+void __init cns3xxx_sdhci_init(void);
+
+#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 8a2f5a21d4e..6dbce13771c 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -247,37 +247,36 @@
  * Misc block
  */
 #define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP_VALUE(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP_VALUE(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP_VALUE(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP_VALUE(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP_VALUE(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP_VALUE(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP_VALUE(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP_VALUE(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP_VALUE(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP_VALUE(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP_VALUE(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP_VALUE(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP_VALUE(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP_VALUE(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP_VALUE(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP_VALUE(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP_VALUE(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP_VALUE(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP_VALUE(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP_VALUE(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP_VALUE(0x814)
+
+#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
+#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
+#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
+#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
+#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
+#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
+#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
+#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
+
+#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
+
+#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
+#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
+#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
+#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
+#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
+#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
 
 #define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
 #define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
@@ -300,21 +299,21 @@
 /*
  * Power management and clock control
  */
-#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
-
-#define PM_CLK_GATE_REG					PMU_REG_VALUE(0x000)
-#define PM_SOFT_RST_REG					PMU_REG_VALUE(0x004)
-#define PM_HS_CFG_REG					PMU_REG_VALUE(0x008)
-#define PM_CACTIVE_STA_REG				PMU_REG_VALUE(0x00C)
-#define PM_PWR_STA_REG					PMU_REG_VALUE(0x010)
-#define PM_CLK_CTRL_REG					PMU_REG_VALUE(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_REG_VALUE(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_REG_VALUE(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_REG_VALUE(0x020)
-#define PM_WDT_CTRL_REG					PMU_REG_VALUE(0x024)
-#define PM_WU_CTRL0_REG					PMU_REG_VALUE(0x028)
-#define PM_WU_CTRL1_REG					PMU_REG_VALUE(0x02C)
-#define PM_CSR_REG					PMU_REG_VALUE(0x030)
+#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
+
+#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
+#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
+#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
+#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
+#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
+#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
+#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
+#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
+#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
+#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
+#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
+#define PM_CSR_REG					PMU_MEM_MAP(0x030)
 
 /* PM_CLK_GATE_REG */
 #define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
new file mode 100644
index 00000000000..38088c36936
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -0,0 +1,389 @@
+/*
+ * PCI-E support for CNS3xxx
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Richard Liu <richard.liu@caviumnetworks.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <asm/mach/map.h>
+#include <mach/cns3xxx.h>
+#include "core.h"
+
+enum cns3xxx_access_type {
+	CNS3XXX_HOST_TYPE = 0,
+	CNS3XXX_CFG0_TYPE,
+	CNS3XXX_CFG1_TYPE,
+	CNS3XXX_NUM_ACCESS_TYPES,
+};
+
+struct cns3xxx_pcie {
+	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
+	unsigned int irqs[2];
+	struct resource res_io;
+	struct resource res_mem;
+	struct hw_pci hw_pci;
+
+	bool linked;
+};
+
+static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */
+
+static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
+{
+	struct pci_sys_data *root = sysdata;
+
+	return &cns3xxx_pcie[root->domain];
+}
+
+static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+{
+	return sysdata_to_cnspci(dev->sysdata);
+}
+
+static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
+{
+	return sysdata_to_cnspci(bus->sysdata);
+}
+
+static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
+				  unsigned int devfn, int where)
+{
+	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
+	int busno = bus->number;
+	int slot = PCI_SLOT(devfn);
+	int offset;
+	enum cns3xxx_access_type type;
+	void __iomem *base;
+
+	/* If there is no link, just show the CNS PCI bridge. */
+	if (!cnspci->linked && (busno > 0 || slot > 0))
+		return NULL;
+
+	/*
+	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
+	 * we still want to access it. For this to work, we must place
+	 * the first device on the same bus as the CNS PCI bridge.
+	 */
+	if (busno == 0) {
+		if (slot > 1)
+			return NULL;
+		type = slot;
+	} else {
+		type = CNS3XXX_CFG1_TYPE;
+	}
+
+	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
+	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
+
+	return base + offset;
+}
+
+static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base) {
+		*val = 0xffffffff;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	v = __raw_readl(base);
+
+	if (bus->number == 0 && devfn == 0 &&
+			(where & 0xffc) == PCI_CLASS_REVISION) {
+		/*
+		 * RC's class is 0xb, but Linux PCI driver needs 0x604
+		 * for a PCIe bridge. So we must fixup the class code
+		 * to 0x604 here.
+		 */
+		v &= 0xff;
+		v |= 0x604 << 16;
+	}
+
+	*val = (v >> shift) & mask;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base)
+		return PCIBIOS_SUCCESSFUL;
+
+	v = __raw_readl(base);
+
+	v &= ~(mask << shift);
+	v |= (val & mask) << shift;
+
+	__raw_writel(v, base);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
+	struct resource *res_io = &cnspci->res_io;
+	struct resource *res_mem = &cnspci->res_mem;
+	struct resource **sysres = sys->resource;
+
+	BUG_ON(request_resource(&iomem_resource, res_io) ||
+	       request_resource(&iomem_resource, res_mem));
+
+	sysres[0] = res_io;
+	sysres[1] = res_mem;
+
+	return 1;
+}
+
+static struct pci_ops cns3xxx_pcie_ops = {
+	.read = cns3xxx_pci_read_config,
+	.write = cns3xxx_pci_write_config,
+};
+
+static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
+}
+
+static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
+	int irq = cnspci->irqs[slot];
+
+	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
+		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
+		PCI_FUNC(dev->devfn), slot, pin, irq);
+
+	return irq;
+}
+
+static struct cns3xxx_pcie cns3xxx_pcie[] = {
+	[0] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe0 I/O space",
+			.start = CNS3XXX_PCIE0_IO_BASE,
+			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe0 non-prefetchable",
+			.start = CNS3XXX_PCIE0_MEM_BASE,
+			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
+		.hw_pci = {
+			.domain = 0,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+	[1] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe1 I/O space",
+			.start = CNS3XXX_PCIE1_IO_BASE,
+			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe1 non-prefetchable",
+			.start = CNS3XXX_PCIE1_MEM_BASE,
+			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
+		.hw_pci = {
+			.domain = 1,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+};
+
+static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	u32 reg;
+	unsigned long time;
+
+	reg = __raw_readl(MISC_PCIE_CTRL(port));
+	/*
+	 * Enable Application Request to 1, it will exit L1 automatically,
+	 * but when chip back, it will use another clock, still can use 0x1.
+	 */
+	reg |= 0x3;
+	__raw_writel(reg, MISC_PCIE_CTRL(port));
+
+	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
+	pr_info("PCIe: Port[%d] Check data link layer...", port);
+
+	time = jiffies;
+	while (1) {
+		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
+		if (reg & 0x1) {
+			pr_info("Link up.\n");
+			cnspci->linked = 1;
+			break;
+		} else if (time_after(jiffies, time + 50)) {
+			pr_info("Device not found.\n");
+			break;
+		}
+	}
+}
+
+static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	struct pci_sys_data sd = {
+		.domain = port,
+	};
+	struct pci_bus bus = {
+		.number = 0,
+		.ops = &cns3xxx_pcie_ops,
+		.sysdata = &sd,
+	};
+	u32 io_base = cnspci->res_io.start >> 16;
+	u32 mem_base = cnspci->res_mem.start >> 16;
+	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
+	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
+	u32 devfn = 0;
+	u8 tmp8;
+	u16 pos;
+	u16 dc;
+
+	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
+	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
+
+	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
+
+	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
+
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
+
+	if (!cnspci->linked)
+		return;
+
+	/* Set Device Max_Read_Request_Size to 128 byte */
+	devfn = PCI_DEVFN(1, 0);
+	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	dc &= ~(0x3 << 12);	/* Clear Device Control Register [14:12] */
+	pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	if (!(dc & (0x3 << 12)))
+		pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
+
+	/* Disable PCIe0 Interrupt Mask INTA to INTD */
+	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+}
+
+static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
+				      struct pt_regs *regs)
+{
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+	return 0;
+}
+
+static int __init cns3xxx_pcie_init(void)
+{
+	int i;
+
+	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+			"imprecise external abort");
+
+	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+		iotable_init(cns3xxx_pcie[i].cfg_bases,
+			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
+		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+		pci_common_init(&cns3xxx_pcie[i].hw_pci);
+	}
+
+	pci_assign_unassigned_resources();
+
+	return 0;
+}
+device_initcall(cns3xxx_pcie_init);
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 725e1a4fc23..38e44706fea 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,18 +6,25 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
-	PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg |= (block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
 }
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
-	PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
+	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
@@ -25,22 +32,29 @@ void cns3xxx_pwr_power_up(unsigned int block)
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
 	/* write '1' to power down */
-	PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+	reg |= (block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_SOFT_RST_REG);
+
 	/*
 	 * bit 0, 28, 29 => program low to reset,
 	 * the other else program low and then high
 	 */
 	if (block & 0x30000001) {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
 	} else {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
-		PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg |= (block & PM_SOFT_RST_REG_MASK);
 	}
+
+	__raw_writel(reg, PM_SOFT_RST_REG);
 }
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
@@ -73,12 +87,13 @@ void arch_reset(char mode, const char *cmd)
  */
 int cns3xxx_cpu_clock(void)
 {
+	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
 	int cpu;
 	int cpu_sel;
 	int div_sel;
 
-	cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
 
 	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 2ec3095ffb7..b280efb1fa1 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
 
@@ -469,6 +470,11 @@ struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 	},
 };
 
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+	.defdcdc_default = true,
+};
+
 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
@@ -494,6 +500,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* dcdc3 */
@@ -507,6 +514,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* ldo1 */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index a91edfb8bee..22eb97c1c30 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -48,19 +48,16 @@
  * below 128M
  */
 static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+__arch_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = (128<<20) >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
 
-#define arch_adjust_zones(node, zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+#define arch_adjust_zones(zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 5da2cf402c8..f7a12586a1f 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -752,6 +752,67 @@ void __init dove_xor1_init(void)
 	platform_device_register(&dove_xor11_channel);
 }
 
+/*****************************************************************************
+ * SDIO
+ ****************************************************************************/
+static u64 sdio_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_sdio0_resources[] = {
+	{
+		.start	= DOVE_SDIO0_PHYS_BASE,
+		.end	= DOVE_SDIO0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO0,
+		.end	= IRQ_DOVE_SDIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio0 = {
+	.name		= "sdhci-mv",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio0_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio0_resources),
+};
+
+void __init dove_sdio0_init(void)
+{
+	platform_device_register(&dove_sdio0);
+}
+
+static struct resource dove_sdio1_resources[] = {
+	{
+		.start	= DOVE_SDIO1_PHYS_BASE,
+		.end	= DOVE_SDIO1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO1,
+		.end	= IRQ_DOVE_SDIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio1 = {
+	.name		= "sdhci-mv",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio1_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio1_resources),
+};
+
+void __init dove_sdio1_init(void)
+{
+	platform_device_register(&dove_sdio1);
+}
+
 void __init dove_init(void)
 {
 	int tclk;
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index b29e8937de4..a51517c3fe7 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -36,5 +36,7 @@ void dove_uart3_init(void);
 void dove_spi0_init(void);
 void dove_spi1_init(void);
 void dove_i2c_init(void);
+void dove_sdio0_init(void);
+void dove_sdio1_init(void);
 
 #endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index f2971b74522..bef70460fbc 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -82,6 +82,8 @@ static void __init dove_db_init(void)
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_sata_init(&dove_db_sata_data);
+	dove_sdio0_init();
+	dove_sdio1_init();
 	dove_spi0_init();
 	dove_spi1_init();
 	dove_uart0_init();
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3a1a855bfdc..f744f676783 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data adssphere_flash_data = {
-	.width		= 4,
-};
-
-static struct resource adssphere_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device adssphere_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &adssphere_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &adssphere_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 static void __init adssphere_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&adssphere_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	ep93xx_register_eth(&adssphere_eth_data, 1);
 }
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e29bdef9b2e..7f3039761d9 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -185,7 +185,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll1",		&clk_pll1),
 	INIT_CK(NULL,			"fclk",		&clk_f),
 	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9092677f63e..8e37a045188 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -29,6 +29,7 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
@@ -215,8 +216,8 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 	spin_lock_irqsave(&syscon_swlock, flags);
 
 	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val |= set_bits;
 	val &= ~clear_bits;
+	val |= set_bits;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
 
@@ -348,6 +349,43 @@ static struct platform_device ep93xx_ohci_device = {
 
 
 /*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width:	bank width in octets
+ * @start:	resource start address
+ * @size:	resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+				  resource_size_t start, resource_size_t size)
+{
+	ep93xx_flash_data.width		= width;
+
+	ep93xx_flash_resource.start	= start;
+	ep93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
  * EP93xx ethernet peripheral handling
  *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
@@ -620,6 +658,11 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+static struct platform_device ep93xx_bl_device = {
+	.name		= "ep93xx-bl",
+	.id		= -1,
+};
+
 /**
  * ep93xx_register_fb - Register the framebuffer platform device.
  * @data:	platform specific framebuffer configuration (__initdata)
@@ -628,6 +671,7 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
 	platform_device_register(&ep93xx_fb_device);
+	platform_device_register(&ep93xx_bl_device);
 }
 
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3884182cd36..c2ce9034ba8 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -38,39 +37,13 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data edb93xx_flash_data;
-
-static struct resource edb93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb93xx_flash_resource,
-};
-
-static void __init __edb93xx_register_flash(unsigned int width,
-			resource_size_t start, resource_size_t size)
-{
-	edb93xx_flash_data.width	= width;
-	edb93xx_flash_resource.start	= start;
-	edb93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&edb93xx_flash);
-}
-
 static void __init edb93xx_register_flash(void)
 {
 	if (machine_is_edb9307() || machine_is_edb9312() ||
 	    machine_is_edb9315()) {
-		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	} else {
-		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index a809618e9f0..d97168c0ba3 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data gesbc9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource gesbc9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gesbc9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gesbc9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gesbc9312_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 static void __init gesbc9312_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&gesbc9312_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&gesbc9312_eth_data, 0);
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 9a4413dd44b..a6c09176334 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -43,6 +43,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 unsigned int ep93xx_chip_revision(void);
 
+void ep93xx_register_flash(unsigned int width,
+			   resource_size_t start, resource_size_t size);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 1cc911b4efa..2ba776320a8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,31 +30,6 @@
  * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
-static struct physmap_flash_data micro9_flash_data;
-
-static struct resource micro9_flash_resource = {
-	.start		= EP93XX_CS1_PHYS_BASE,
-	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device micro9_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &micro9_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &micro9_flash_resource,
-};
-
-static void __init __micro9_register_flash(unsigned int width)
-{
-	micro9_flash_data.width = width;
-
-	platform_device_register(&micro9_flash);
-}
-
 static unsigned int __init micro9_detect_bootwidth(void)
 {
 	u32 v;
@@ -70,10 +44,17 @@ static unsigned int __init micro9_detect_bootwidth(void)
 
 static void __init micro9_register_flash(void)
 {
+	unsigned int width;
+
 	if (machine_is_micro9())
-		__micro9_register_flash(4);
+		width = 4;
 	else if (machine_is_micro9m() || machine_is_micro9s())
-		__micro9_register_flash(micro9_detect_bootwidth());
+		width = micro9_detect_bootwidth();
+	else
+		width = 0;
+
+	if (width)
+		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
 }
 
 
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 388aec95f60..5dded588413 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -29,26 +28,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static struct physmap_flash_data simone_flash_data = {
-	.width		= 2,
-};
-
-static struct resource simone_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device simone_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &simone_flash_resource,
-	.dev = {
-		.platform_data	= &simone_flash_data,
-	},
-};
-
 static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
@@ -77,8 +56,7 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = {
 static void __init simone_init_machine(void)
 {
 	ep93xx_init_devices();
-
-	platform_device_register(&simone_flash);
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&simone_eth_data, 1);
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index ae7319e588c..93aeab8af70 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
@@ -173,31 +172,13 @@ static struct platform_device ts72xx_nand_flash = {
 };
 
 
-/*************************************************************************
- * NOR flash (TS-7200 only)
- *************************************************************************/
-static struct physmap_flash_data ts72xx_nor_data = {
-	.width		= 2,
-};
-
-static struct resource ts72xx_nor_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ts72xx_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev.platform_data	= &ts72xx_nor_data,
-	.resource		= &ts72xx_nor_resource,
-	.num_resources		= 1,
-};
-
 static void __init ts72xx_register_flash(void)
 {
+	/*
+	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
+	 */
 	if (board_is_ts7200()) {
-		platform_device_register(&ts72xx_nor_flash);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	} else {
 		resource_size_t start;
 
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index e3bc3f6f6b1..88b3dd89be8 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -232,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt);
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index a9ee8f0d48b..27cafd12f03 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,8 +11,10 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
+
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
 
 		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-imx/Kconfig
index 742fd4e6dcb..c5c0369bb48 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,42 +1,103 @@
+config IMX_HAVE_DMA_V1
+	bool
+
+if ARCH_MX1
+
+config SOC_IMX1
+	select CPU_ARM920T
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+endif
+
 if ARCH_MX2
 
+config SOC_IMX21
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+config SOC_IMX27
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
 choice
 	prompt "CPUs:"
 	default MACH_MX21
 
 config MACH_MX21
 	bool "i.MX21 support"
-	select ARCH_MXC_AUDMUX_V1
+	select SOC_IMX21
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
-	select ARCH_MXC_AUDMUX_V1
+	select SOC_IMX27
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
 endchoice
 
-comment "MX2 platforms:"
+endif
+
+if MACH_MX21
+
+comment "MX21 platforms:"
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
-	depends on MACH_MX21
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
+endif
+
+if MACH_MX27
+
+comment "MX27 platforms:"
+
 config MACH_MX27ADS
 	bool "MX27ADS platform"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -58,7 +119,9 @@ endchoice
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -67,9 +130,16 @@ config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
 	depends on MACH_CPUIMX27
 	help
-	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  This adds support for the internal SDHC2 used on CPUIMX27
 	  for wifi or eMMC.
 
+config MACH_EUKREA_CPUIMX27_USEUART4
+	bool "CPUIMX27 integrates UART4 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal UART4 used on CPUIMX27
+	  for bluetooth.
+
 choice
 	prompt "Baseboard"
 	depends on MACH_CPUIMX27
@@ -78,6 +148,8 @@ choice
 config MACH_EUKREA_MBIMX27_BASEBOARD
 	prompt "Eukrea MBIMX27 development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMX27 evaluation board.
@@ -86,21 +158,24 @@ endchoice
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
@@ -108,7 +183,9 @@ config MACH_PCA100
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
-	depends on MACH_MX27
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-imx/Makefile
index e3254faac82..46a9fdfbbd1 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,14 +4,24 @@
 
 # Object file lists.
 
-obj-y	:=  devices.o serial.o
+obj-y	:=  devices.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index e867398a8fd..7988a85cf07 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,3 +1,7 @@
+zreladdr-$(CONFIG_ARCH_MX1)	:= 0x08008000
+params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+
 zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
 params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
 initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c
index 6cf2d4a7511..c05096c3830 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -2,18 +2,17 @@
  *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
  */
 
 #include <linux/kernel.h>
@@ -29,7 +28,41 @@
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include "crm_regs.h"
+
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+/* CCM register addresses */
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xf
+
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+/* SCM register addresses */
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
 
 static int _clk_enable(struct clk *clk)
 {
@@ -596,7 +629,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c
index bb419ef4d13..bb419ef4d13 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 0f0823c8b17..5a1aa15c8a1 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index d8d3b2d84dc..d8d3b2d84dc 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 00000000000..a8d94f07819
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+
+#define imx1_add_i2c_imx(pdata)		\
+	imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+
+#define imx1_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
+#define imx1_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 00000000000..42788e99d12
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+
+#define imx21_add_i2c_imx(pdata)	\
+	imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+
+#define imx21_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
+#define imx21_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
+#define imx21_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
+#define imx21_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+
+#define imx21_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+
+#define imx21_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
+#define imx21_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 00000000000..65e7bb7ec2e
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+
+#define imx27_add_i2c_imx0(pdata)	\
+	imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
+#define imx27_add_i2c_imx1(pdata)	\
+	imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+
+#define imx27_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
+#define imx27_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
+#define imx27_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
+#define imx27_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
+#define imx27_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
+#define imx27_add_imx_uart5(pdata)	\
+	imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+
+#define imx27_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+
+#define imx27_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
+#define imx27_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
+#define imx27_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c
index a0aeb8a4adc..9c271a752b8 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -11,6 +11,9 @@
  *
  * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -32,6 +35,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/serial.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -40,38 +44,179 @@
 
 #include "devices.h"
 
-/*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
-	static struct resource mxc_spi_resources ## n[] = {			\
-		{								\
-			.start = baseaddr,					\
-			.end = baseaddr + SZ_4K - 1,				\
-			.flags = IORESOURCE_MEM,				\
-		}, {								\
-			.start = irq,						\
-			.end = irq,						\
-			.flags = IORESOURCE_IRQ,				\
-		},								\
-	};									\
-										\
-	struct platform_device mxc_spi_device ## n = {				\
-		.name = "spi_imx",						\
-		.id = n,							\
-		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
-		.resource = mxc_spi_resources ## n,				\
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+	{
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CSI_INT,
+		.end    = MX1_CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device imx1_camera_device = {
+	.name           = "mx1-camera",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx1_camera_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource       = imx1_camera_resources,
+	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
+};
+
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_RTC_INT,
+		.end    = MX1_RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = MX1_RTC_SAMINT,
+		.end    = MX1_RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	{
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_WDT_INT,
+		.end    = MX1_WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	{
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX1_USBD_INT0,
+		.end	= MX1_USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT1,
+		.end	= MX1_USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT2,
+		.end	= MX1_USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT3,
+		.end	= MX1_USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT4,
+		.end	= MX1_USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT5,
+		.end	= MX1_USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT6,
+		.end	= MX1_USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+		.irq = MX1_GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+		.irq = MX1_GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+		.irq = MX1_GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+		.irq = MX1_GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
+};
+
+int __init imx1_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
 
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
 
 #ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
+static struct resource mx27_camera_resources[] = {
+	{
+	       .start = MX27_CSI_BASE_ADDR,
+	       .end = MX27_CSI_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_EMMA_PRP_BASE_ADDR,
+	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_INT_CSI,
+	       .end = MX27_INT_CSI,
+	       .flags = IORESOURCE_IRQ,
+	},{
+	       .start = MX27_INT_EMMAPRP,
+	       .end = MX27_INT_EMMAPRP,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device mx27_camera_device = {
+	.name = "mx2-camera",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mx27_camera_resources),
+	.resource = mx27_camera_resources,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
 #endif
 
 /*
@@ -140,34 +285,6 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
-	static struct resource pfx ## _nand_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-	};								\
-									\
-	struct platform_device pfx ## _nand_device = {			\
-		.name = "mxc_nand",					\
-		.id = 0,						\
-		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
-		.resource = pfx ## _nand_resources,			\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
-
 /*
  * lcdc:
  * - i.MX1: the basic controller
@@ -218,32 +335,6 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
-	static struct resource mxc_i2c_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_i2c_device ## n = {			\
-		.name = "imx-i2c",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
-		.resource = mxc_i2c_resources ## n,			\
-	}
-
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
-
 static struct resource mxc_pwm_resources[] = {
 	{
 		.start = MX2x_PWM_BASE_ADDR,
@@ -454,26 +545,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 #ifdef CONFIG_MACH_MX21
 DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+
+int __init imx21_register_gpios(void)
+{
+	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
 #endif
 
 #ifdef CONFIG_MACH_MX27
 DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
 
-int __init mxc_register_gpios(void)
+int __init imx27_register_gpios(void)
 {
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-	else
-#endif
-		return 0;
+	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
 }
+#endif
 
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
@@ -501,3 +587,23 @@ struct platform_device mx21_usbhc_device = {
 };
 #endif
 
+static struct resource imx_kpp_resources[] = {
+	{
+		.start  = MX2x_KPP_BASE_ADDR,
+		.end    = MX2x_KPP_BASE_ADDR + 0xf,
+		.flags  = IORESOURCE_MEM
+	}, {
+		.start  = MX2x_INT_KPP,
+		.end    = MX2x_INT_KPP,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
+#endif
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-imx/devices.h
index 84ed5138017..efd4527506a 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -1,3 +1,11 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
 #ifdef CONFIG_MACH_MX27
@@ -6,37 +14,19 @@ extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 #endif
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
 extern struct platform_device mx21_usbhc_device;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c
index e16014b0d13..fd1d9197d06 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ *  linux/arch/arm/plat-mxc/dma-v1.c
  *
  *  i.MX DMA registration and IRQ dispatching
  *
@@ -34,7 +34,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma-v1.h>
 
 #define DMA_DCR     0x00		/* Control Register */
 #define DMA_DISR    0x04		/* Interrupt status Register */
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index f3b169d5245..4edc5f43920 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
  *
  * Based on pcm970-baseboard.c which is :
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
@@ -24,6 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach/arch.h>
 
@@ -32,8 +35,11 @@
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
-#include <mach/imx-uart.h>
+#include <mach/spi.h>
+#include <mach/ssi.h>
+#include <mach/audmux.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int eukrea_mbimx27_pins[] = {
@@ -48,10 +54,12 @@ static int eukrea_mbimx27_pins[] = {
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
 	/* UART4 */
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
 	PB31_AF_UART4_RXD,
+#endif
 	/* SDHC1*/
 	PE18_PF_SD1_D0,
 	PE19_PF_SD1_D1,
@@ -84,10 +92,29 @@ static int eukrea_mbimx27_pins[] = {
 	PA30_PF_CONTRAST,
 	PA31_PF_OE_ACD,
 	/* SPI1 */
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
+	/* SSI4 */
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD | GPIO_PUEN,
+	PC18_PF_SSI4_TXD | GPIO_PUEN,
+	PC19_PF_SSI4_CLK,
+#endif
+};
+
+static const uint32_t eukrea_mbimx27_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+};
+
+static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+	.keymap         = eukrea_mbimx27_keymap,
+	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
 
 static struct gpio_led gpio_leds[] = {
@@ -103,12 +130,6 @@ static struct gpio_led gpio_leds[] = {
 		.active_low		= 1,
 		.gpio			= GPIO_PORTF | 19,
 	},
-	{
-		.name			= "backlight",
-		.default_trigger	= "backlight",
-		.active_low		= 0,
-		.gpio			= GPIO_PORTE | 5,
-	},
 };
 
 static struct gpio_led_platform_data gpio_led_info = {
@@ -127,7 +148,7 @@ static struct platform_device leds_gpio = {
 static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
 	{
 		.mode = {
-			.name		= "CMO-QGVA",
+			.name		= "CMO-QVGA",
 			.refresh	= 60,
 			.xres		= 320,
 			.yres		= 240,
@@ -141,6 +162,38 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
 		},
 		.pcr		= 0xFAD08B80,
 		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
 	},
 };
 
@@ -153,16 +206,52 @@ static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
 	.dmacr		= 0x00040060,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
 	},
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
@@ -173,7 +262,6 @@ static void ads7846_dev_init(void)
 		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 		return;
 	}
-
 	gpio_direction_input(ADS7846_PENDOWN);
 }
 
@@ -186,7 +274,9 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
+#endif
 
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -201,16 +291,30 @@ static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 
 static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
 
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
 #endif
 
+static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&leds_gpio,
 };
 
+static struct imxmmc_platform_data sdhc_pdata = {
+	.dat3_card_detect = 1,
+};
+
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx27 init.
  *
@@ -222,21 +326,52 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
 		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	/* SSI unit master I2S codec connected to SSI_PINS_4*/
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_TFSDIR |
+			MXC_AUDMUX_V1_PCR_TCLKDIR |
+			MXC_AUDMUX_V1_PCR_RFSDIR |
+			MXC_AUDMUX_V1_PCR_RCLKDIR |
+			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
+	);
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+	);
+#endif
+
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
 
 	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, NULL);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* SPI and ADS7846 Touchscreen controler init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	/* ADS7846 Touchscreen controller init */
 	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	ads7846_dev_init();
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
 	spi_register_board_info(eukrea_mbimx27_spi_board_info,
 			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-	ads7846_dev_init();
 #endif
 
 	/* Leds configuration */
@@ -244,6 +379,14 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
 	/* Backlight */
 	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
+
+	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 00000000000..df5f522da6b
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+
+#include <mach/dma-v1.h>
+
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h
index 7c4870bd5a2..287431cc13e 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
  *
  *  i.MX DMA registration and IRQ dispatching
  *
@@ -22,8 +22,10 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_DMA_H
-#define __ASM_ARCH_MXC_DMA_H
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
 
 #define IMX_DMA_CHANNELS  16
 
@@ -102,4 +104,4 @@ enum imx_dma_prio {
 
 int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
 
-#endif	/* _ASM_ARCH_MXC_DMA_H */
+#endif	/* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 1f616dcaabc..575ff1ae85a 100644
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -26,20 +26,24 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int eukrea_cpuimx27_pins[] = {
@@ -49,10 +53,12 @@ static int eukrea_cpuimx27_pins[] = {
 	PE14_PF_UART1_CTS,
 	PE15_PF_UART1_RTS,
 	/* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
 	PB31_AF_UART4_RXD,
+#endif
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -76,19 +82,47 @@ static int eukrea_cpuimx27_pins[] = {
 	PD17_PF_I2C_DATA,
 	PD18_PF_I2C_CLK,
 	/* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+#endif
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	/* Quad UART's IRQ */
-	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
 #endif
+	/* OTG */
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
@@ -111,15 +145,12 @@ static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
 	.resource = &eukrea_cpuimx27_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -127,9 +158,11 @@ static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_cpuimx27_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_wdt,
+	&mxc_w1_master_device,
 };
 
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -182,34 +215,83 @@ static struct platform_device serial_device = {
 };
 #endif
 
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
 static void __init eukrea_cpuimx27_init(void)
 {
 	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
 		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&imx27_nand_device,
-			&eukrea_cpuimx27_nand_board_info);
+	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	/* SDHC2 can be used for Wifi */
 	mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+	imx27_add_imx_uart3(&uart_pdata);
 #endif
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	platform_device_register(&serial_device);
 #endif
 
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
 #endif
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index b5710bf18b9..22a2b5d9121 100644
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -26,10 +22,9 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mx27lite_pins[] = {
@@ -59,7 +54,7 @@ static unsigned int mx27lite_pins[] = {
 	PF23_AIN_FEC_TX_EN,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -71,7 +66,7 @@ static void __init mx27lite_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
 		"imx27lite");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 51f3cfd83db..77a760cfadc 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,10 +26,10 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
 static int mx1ads_pins[] = {
@@ -58,12 +58,12 @@ static int mx1ads_pins[] = {
  * UARTs platform data
  */
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+       
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
 };
 
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 	}
 };
 
-static struct imxi2c_platform_data mx1ads_i2c_data = {
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -121,8 +121,8 @@ static void __init mx1ads_init(void)
 		ARRAY_SIZE(mx1ads_pins), "mx1ads");
 
 	/* UART */
-	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
-	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
@@ -131,7 +131,7 @@ static void __init mx1ads_init(void)
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
-	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+	imx1_add_i2c_imx(&mx1ads_i2c_data);
 }
 
 static void __init mx1ads_timer_init(void)
@@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
@@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 113e58d7cb4..96d7f8189f3 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -28,15 +24,49 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imx-uart.h>
 #include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
 
+#include "devices-imx21.h"
 #include "devices.h"
 
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
 static unsigned int mx21ads_pins[] = {
 
 	/* CS8900A */
@@ -133,14 +163,13 @@ static struct platform_device mx21ads_nor_mtd_device = {
 	.resource = &mx21ads_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxuart_platform_data uart_norts_pdata = {
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 
-
 static int mx21ads_fb_init(struct platform_device *pdev)
 {
 	u16 tmp;
@@ -227,7 +256,8 @@ static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
 	.exit = mx21ads_sdhc_exit,
 };
 
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -263,12 +293,12 @@ static void __init mx21ads_board_init(void)
 	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
 			"mx21ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	imx21_add_imx_uart0(&uart_pdata_rts);
+	imx21_add_imx_uart2(&uart_pdata_norts);
+	imx21_add_imx_uart3(&uart_pdata_rts);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index b2f4e0db3fb..e66ffaa1c26 100644
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -12,23 +12,25 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
  */
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mx27pdk_pins[] = {
@@ -58,7 +60,7 @@ static unsigned int mx27pdk_pins[] = {
 	PF23_AIN_FEC_TX_EN,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -66,12 +68,34 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mxc_fec_device,
 };
 
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx27_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx27_3ds_keymap_data = {
+	.keymap		= mx27_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
+};
+
 static void __init mx27pdk_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 6ce323669e5..9c77da98a10 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,16 +28,44 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
 static unsigned int mx27ads_pins[] = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
@@ -141,7 +165,8 @@ static unsigned int mx27ads_pins[] = {
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -168,7 +193,7 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static struct imxi2c_platform_data mx27ads_i2c_data = {
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -263,20 +288,8 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mxc_w1_master_device,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mx27ads_board_init(void)
@@ -284,18 +297,18 @@ static void __init mx27ads_board_init(void)
 	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 			"mx27ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_imx_uart3(&uart_pdata);
+	imx27_add_imx_uart4(&uart_pdata);
+	imx27_add_imx_uart5(&uart_pdata);
+	imx27_add_mxc_nand(&mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
-	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	imx27_add_i2c_imx1(&mx27ads_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
@@ -342,4 +355,3 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index bc385599267..a3a1e452d4c 100644
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,14 +28,13 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mxt_td60_pins[] __initdata = {
@@ -128,12 +123,13 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -173,7 +169,7 @@ static struct i2c_board_info mxt_td60_i2c_devices[] = {
 	},
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -239,14 +235,8 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mxc_fec_device,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mxt_td60_board_init(void)
@@ -254,10 +244,10 @@ static void __init mxt_td60_board_init(void)
 	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
 			"MXT_TD60");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -265,8 +255,8 @@ static void __init mxt_td60_board_init(void)
 	i2c_register_board_info(1, mxt_td60_i2c2_devices,
 				ARRAY_SIZE(mxt_td60_i2c2_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
+	imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index a87422ed4ff..6c92deaf468 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,12 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
 #include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 #include <mach/mxc_nand.h>
@@ -49,11 +44,16 @@
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include <mach/imxfb.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+#define SPI1_SS0 (GPIO_PORTD + 28)
+#define SPI1_SS1 (GPIO_PORTD + 27)
+#define SD2_CD (GPIO_PORTC + 29)
 
 static int pca100_pins[] = {
 	/* UART1 */
@@ -68,6 +68,7 @@ static int pca100_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	SD2_CD | GPIO_GPIO | GPIO_IN,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -131,13 +132,42 @@ static int pca100_pins[] = {
 	PD23_AF_USBH2_DATA2,
 	PD24_AF_USBH2_DATA1,
 	PD26_AF_USBH2_DATA5,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA26_PF_PS,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA31_PF_OE_ACD,
+	/* free GPIO */
+	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
+	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
+	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pca100_nand_board_info = {
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -148,7 +178,7 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mxc_wdt,
 };
 
-static struct imxi2c_platform_data pca100_i2c_1_data = {
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -189,9 +219,9 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = {
 	},
 };
 
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
 
-static struct spi_imx_master pca100_spi_0_data = {
+static const struct spi_imx_master pca100_spi0_data __initconst = {
 	.chipselect	= pca100_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
@@ -253,6 +283,7 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -276,6 +307,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -297,6 +329,45 @@ static int __init pca100_otg_mode(char *options)
 }
 __setup("otg_mode=", pca100_otg_mode);
 
+/* framebuffer info */
+static struct imx_fb_videomode pca100_fb_modes[] = {
+	{
+		.mode = {
+			.name		= "EMERGING-ETV570G0DHU",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39722, /* in ps (25.175 MHz) */
+			.hsync_len	= 30,
+			.left_margin	= 114,
+			.right_margin	= 16,
+			.vsync_len	= 3,
+			.upper_margin	= 32,
+			.lower_margin	= 0,
+		},
+		/*
+		 * TFT
+		 * Pixel pol active high
+		 * HSYNC active low
+		 * VSYNC active low
+		 * use HSYNC for ACD count
+		 * line clock disable while idle
+		 * always enable line clock even if no data
+		 */
+		.pcr = 0xf0c08080,
+		.bpp = 16,
+	},
+};
+
+static struct imx_fb_platform_data pca100_fb_data = {
+	.mode = pca100_fb_modes,
+	.num_modes = ARRAY_SIZE(pca100_fb_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init pca100_init(void)
 {
 	int ret;
@@ -320,33 +391,24 @@ static void __init pca100_init(void)
 
 	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pca100_i2c_devices,
 				ARRAY_SIZE(pca100_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+	imx27_add_i2c_imx1(&pca100_i2c1_data);
 
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+	imx27_add_spi_imx0(&pca100_spi_0_data);
 #endif
 
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
@@ -372,6 +434,8 @@ static void __init pca100_init(void)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 	}
 
+	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 36c89431679..9212e8f3700 100644
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -35,14 +35,12 @@
 #include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int pcm038_pins[] = {
@@ -162,17 +160,12 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -192,7 +185,7 @@ static void __init pcm038_init_sram(void)
 	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -215,7 +208,7 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 
 static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
 
-static struct spi_imx_master pcm038_spi_0_data = {
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
 	.chipselect = pcm038_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
 };
@@ -305,18 +298,18 @@ static void __init pcm038_init(void)
 
 	pcm038_init_sram();
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+	imx27_add_mxc_nand(&pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+	imx27_add_i2c_imx1(&pcm038_i2c1_data);
 
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -326,7 +319,7 @@ static void __init pcm038_init(void)
 	/* MC13783 IRQ */
 	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
 
-	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	imx27_add_spi_imx0(&pcm038_spi0_data);
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 7587a7a1246..88bf0d1e26e 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -22,17 +22,17 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash
  */
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = {
 static struct resource dm9000x_resources[] = {
 	{
 		.name	= "address area",
-		.start	= IMX_CS5_PHYS,
-		.end	= IMX_CS5_PHYS + 1,
+		.start	= MX1_CS5_PHYS,
+		.end	= MX1_CS5_PHYS + 1,
 		.flags	= IORESOURCE_MEM,	/* address access */
 	}, {
 		.name	= "data area",
-		.start	= IMX_CS5_PHYS + 4,
-		.end	= IMX_CS5_PHYS + 5,
+		.start	= MX1_CS5_PHYS + 4,
+		.end	= MX1_CS5_PHYS + 5,
 		.flags	= IORESOURCE_MEM,	/* data access */
 	}, {
 		.start	= IRQ_GPIOC(3),
@@ -108,14 +108,13 @@ static int uart1_mxc_init(struct platform_device *pdev)
 			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
 }
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.init = uart1_mxc_init,
 	.exit = uart1_mxc_exit,
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -131,7 +130,7 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init scb9328_init(void)
 {
-	mxc_register_device(&imx_uart1_device, &uart_pdata);
+	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c
index 7f9fc1034c0..9be92b96dc8 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -3,7 +3,7 @@
  *  Created: april 20th, 2004
  *  Copyright: Synertronixx GmbH
  *
- *  Common code for i.MX machines
+ *  Common code for i.MX1 machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -31,23 +26,25 @@
 
 static struct map_desc imx_io_desc[] __initdata = {
 	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
+		.virtual = MX1_IO_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+		.length = MX1_IO_SIZE,
+		.type = MT_DEVICE
 	}
 };
 
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
 
+int imx1_register_gpios(void);
+
 void __init mx1_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
+	imx1_register_gpios();
 }
-
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 64134314d01..12faeeaa0a9 100644
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx21.c
+ * arch/arm/mach-imx/mm-imx21.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@ void __init mx21_map_io(void)
 	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
 
+int imx21_register_gpios(void);
+
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+	imx21_register_gpios();
 }
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 3366ed44cfd..a24622957ff 100644
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx27.c
+ * arch/arm/mach-imx/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@ void __init mx27_map_io(void)
 	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
+int imx27_register_gpios(void);
+
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+	imx27_register_gpios();
 }
diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
index b09ee12a4ff..b09ee12a4ff 100644
--- a/arch/arm/mach-mx1/ksym_mx1.c
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
index 9c69aa65bf1..9c69aa65bf1 100644
--- a/arch/arm/mach-mx1/mx1_camera_fiq.S
+++ b/arch/arm/mach-imx/mx1-camera-fiq.S
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a406d57..f490a406d57 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
new file mode 100644
index 00000000000..afc17ce0bb5
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -0,0 +1,46 @@
+/*
+ * i.MX27 Power Management Routines
+ *
+ * Based on Freescale's BSP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/system.h>
+#include <mach/mx27.h>
+
+static int mx27_suspend_enter(suspend_state_t state)
+{
+	u32 cscr;
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* Clear MPEN and SPEN to disable MPLL/SPLL */
+		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr &= 0xFFFFFFFC;
+		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		/* Executes WFI */
+		arch_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mx27_suspend_ops = {
+	.enter = mx27_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init mx27_pm_init(void)
+{
+	suspend_set_ops(&mx27_suspend_ops);
+	return 0;
+}
+
+device_initcall(mx27_pm_init);
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
new file mode 100644
index 00000000000..5f96e1518aa
--- /dev/null
+++ b/arch/arm/mach-integrator/common.h
@@ -0,0 +1 @@
+void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index b02cfc06e0a..8f4fb6d638f 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/termios.h>
@@ -30,6 +31,7 @@
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
+#include <asm/pgtable.h>
 
 static struct amba_pl010_data integrator_uart_data;
 
@@ -119,8 +121,13 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
 	}, {	/* UART1 */
@@ -215,3 +222,13 @@ void cm_control(u32 mask, u32 set)
 }
 
 EXPORT_SYMBOL(cm_control);
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 227cf4d0508..6ab5a03ab9d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -48,6 +48,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "common.h"
+
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -502,6 +504,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ap_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index cde57b2b83b..05db40e3c4f 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -43,6 +43,8 @@
 
 #include <plat/timer-sp.h>
 
+#include "common.h"
+
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
@@ -601,6 +603,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= intcp_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 9cef0590d5a..6467d99fa2e 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -505,10 +505,10 @@ void __init pci_v3_preinit(void)
 	/*
 	 * Hook in our fault handler for PCI errors
 	 */
-	hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 
 	spin_lock_irqsave(&v3_lock, flags);
 
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 25b1da9a503..7415e433865 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -69,6 +69,4 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
-#define PFN_TO_NID(addr)	(0)
-
 #endif
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 6d5a90813d3..773ea0c95b9 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -987,7 +987,7 @@ void __init iop13xx_pci_init(void)
 		iop13xx_atux_setup();
 	}
 
-	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
+	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
 			"imprecise external abort");
 }
 
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 90771cad06f..f797c5f538b 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -209,7 +209,7 @@ ixp2000_pci_preinit(void)
 			"the needed workaround has not been configured in");
 #endif
 
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
 				"PCI config cycle to non-existent device");
 }
 
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 4b0e598a91c..563819a8329 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -229,7 +229,7 @@ void __init ixp23xx_pci_preinit(void)
 {
 	ixp23xx_pci_common_init();
 
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
 			"PCI config cycle to non-existent device");
 
 	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index e3181534c7f..61cd4d64b98 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -348,7 +348,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+void __init ixp4xx_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -356,7 +356,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 	/*
 	 * Only adjust if > 64M on current system
 	 */
-	if (node || (zone_size[0] <= sz))
+	if (zone_size[0] <= sz)
 		return;
 
 	zone_size[1] = zone_size[0] - sz;
@@ -382,7 +382,8 @@ void __init ixp4xx_pci_preinit(void)
 
 
 	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
+			"imprecise external abort");
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 98f5e5e2098..0136eaa2922 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -16,10 +16,10 @@
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	ixp4xx_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163b1fe..cc25501b57f 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -75,6 +75,13 @@ config MACH_OPENRD_CLIENT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Client Board.
 
+config MACH_OPENRD_ULTIMATE
+	bool "Marvell OpenRD Ultimate Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Ultimate Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
@@ -87,6 +94,12 @@ config MACH_INETSPACE_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Internet Space v2 NAS.
 
+config MACH_NETSPACE_MAX_V2
+	bool "LaCie Network Space Max v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space Max v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help
@@ -99,6 +112,12 @@ config MACH_NET5BIG_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
+config MACH_T5325
+	bool "HP t5325 Thin Client"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP t5325 Thin Client.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index c0cd5d36200..295d7baa6ae 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -12,7 +12,9 @@ obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 2e69168fc69..8d03bcef518 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -31,6 +31,8 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_PCIE1_IO		0xd0
+#define ATTR_PCIE1_MEM		0xd8
 #define ATTR_SRAM		0x01
 
 /*
@@ -106,17 +108,21 @@ void __init kirkwood_setup_cpu_mbus(void)
 		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
 	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
 		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
+	setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
 
 	/*
 	 * Setup window for NAND controller.
 	 */
-	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+	setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
 	/*
 	 * Setup window for SRAM.
 	 */
-	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+	setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
 		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 6072eaa5e66..9dd67c7b445 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -44,6 +44,11 @@ static struct map_desc kirkwood_io_desc[] __initdata = {
 		.length		= KIRKWOOD_PCIE_IO_SIZE,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
+		.length		= KIRKWOOD_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
@@ -402,7 +407,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (rev == 0)  /* catch all Kirkwood Z0's */
+	if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
 		mvsdio_data->clock = 100000000;
 	else
 		mvsdio_data->clock = 200000000;
@@ -847,8 +852,10 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1))
+
+	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1)) ||
+	    (dev == MV88F6282_DEV_ID))
 		return 200000000;
 
 	return 166666667;
@@ -891,13 +898,22 @@ static char * __init kirkwood_id(void)
 			return "MV88F6192-Z0";
 		else if (rev == MV88F6192_REV_A0)
 			return "MV88F6192-A0";
+		else if (rev == MV88F6192_REV_A1)
+			return "MV88F6192-A1";
 		else
 			return "MV88F6192-Rev-Unsupported";
 	} else if (dev == MV88F6180_DEV_ID) {
 		if (rev == MV88F6180_REV_A0)
 			return "MV88F6180-Rev-A0";
+		else if (rev == MV88F6180_REV_A1)
+			return "MV88F6180-Rev-A1";
 		else
 			return "MV88F6180-Rev-Unsupported";
+	} else if (dev == MV88F6282_DEV_ID) {
+		if (rev == MV88F6282_REV_A0)
+			return "MV88F6282-Rev-A0";
+		else
+			return "MV88F6282-Rev-Unsupported";
 	} else {
 		return "Device-Unknown";
 	}
@@ -949,12 +965,14 @@ void __init kirkwood_init(void)
 static int __init kirkwood_clock_gate(void)
 {
 	unsigned int curr = readl(CLOCK_GATING_CTRL);
+	u32 dev, rev;
 
+	kirkwood_pcie_id(&dev, &rev);
 	printk(KERN_DEBUG "Gating clock of unused units\n");
 	printk(KERN_DEBUG "before: 0x%08x\n", curr);
 
 	/* Make sure those units are accessible */
-	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
 
 	/* For SATA: first shutdown the phy */
 	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
@@ -979,6 +997,18 @@ static int __init kirkwood_clock_gate(void)
 		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
 	}
 
+	/* For PCIe 1: first shutdown the phy */
+	if (dev == MV88F6282_DEV_ID) {
+		if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
+			writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+			while (1)
+				if (readl(PCIE1_STATUS) & 0x1)
+					break;
+			writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+		}
+	} else  /* keep this bit set for devices that don't have PCIe1 */
+		kirkwood_clk_ctrl |= CGC_PEX1;
+
 	/* Now gate clock the required units */
 	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
 	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05e8a8a5692..5b2c1c18d64 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -18,6 +18,9 @@ struct mvsdio_platform_data;
 struct mtd_partition;
 struct mtd_info;
 
+#define KW_PCIE0	(1 << 0)
+#define KW_PCIE1	(1 << 1)
+
 /*
  * Basic Kirkwood init functions used early by machine-setup.
  */
@@ -34,7 +37,7 @@ void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(void);
+void kirkwood_pcie_init(unsigned int portmask);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 39bdf4bcace..16f6691e7c6 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -51,6 +51,14 @@ static struct mvsdio_platform_data db88f6281_mvsdio_data = {
 };
 
 static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
 	MPP37_GPIO,
 	MPP38_GPIO,
 	0
@@ -74,9 +82,15 @@ static void __init db88f6281_init(void)
 
 static int __init db88f6281_pci_init(void)
 {
-	if (machine_is_db88f6281_bp())
-		kirkwood_pcie_init();
+	if (machine_is_db88f6281_bp()) {
+		u32 dev, rev;
 
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
 	return 0;
 }
 subsys_initcall(db88f6281_pci_init);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 418f5017c50..aff0e1327e3 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -59,8 +59,9 @@
 #define CGC_SATA1		(1 << 15)
 #define CGC_XOR1		(1 << 16)
 #define CGC_CRYPTO		(1 << 17)
+#define CGC_PEX1		(1 << 18)
 #define CGC_GE1			(1 << 19)
 #define CGC_TDM			(1 << 20)
-#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+#define CGC_RESERVED		(0x6 << 21)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index f00a0a45a67..9da2eb59180 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -23,6 +23,7 @@
 #define IRQ_KIRKWOOD_XOR_10	7
 #define IRQ_KIRKWOOD_XOR_11	8
 #define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_PCIE1	10
 #define IRQ_KIRKWOOD_GE00_SUM	11
 #define IRQ_KIRKWOOD_GE01_SUM	15
 #define IRQ_KIRKWOOD_USB	19
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index a15cf0ee22b..d141af4c274 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -16,36 +16,48 @@
  * Marvell Kirkwood address maps.
  *
  * phys
- * e0000000	PCIe Memory space
+ * e0000000	PCIe #0 Memory space
+ * e8000000	PCIe #1 Memory space
  * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- * f4000000	Security Accelerator SRAM
+ * f2000000	PCIe #0 I/O space
+ * f3000000	PCIe #1 I/O space
+ * f4000000	NAND controller address window
+ * f5000000	Security Accelerator SRAM
  *
  * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
+ * fed00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	1M	PCIe #0 I/O space
+ * fef00000	f3000000	1M	PCIe #1 I/O space
  */
 
-#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf5000000
 #define KIRKWOOD_SRAM_SIZE		SZ_2K
 
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf4000000
 #define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
+#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
+
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
 #define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
 #define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE		SZ_128M
+
 /*
  * Register Map
  */
@@ -72,6 +84,9 @@
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 #define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
 #define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -107,8 +122,12 @@
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
 #define MV88F6192_REV_A0	2
+#define MV88F6192_REV_A1	3
 
 #define MV88F6180_DEV_ID	0x6180
 #define MV88F6180_REV_A0	2
+#define MV88F6180_REV_A1	3
 
+#define MV88F6282_DEV_ID	0x6282
+#define MV88F6282_REV_A0	0
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
new file mode 100644
index 00000000000..e21272e5f66
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+ *
+ * Platform data structure for Network Space v2 LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NS2_H
+#define __MACH_LEDS_NS2_H
+
+struct ns2_led {
+	const char	*name;
+	const char	*default_trigger;
+	unsigned	cmd;
+	unsigned	slow;
+};
+
+struct ns2_led_platform_data {
+	int		num_leds;
+	struct ns2_led	*leds;
+};
+
+#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index a5900f64e38..065187d177c 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -23,7 +23,8 @@ static unsigned int __init kirkwood_variant(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+	if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
+	    (dev == MV88F6282_DEV_ID))
 		return MPP_F6281_MASK;
 	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
 		return MPP_F6192_MASK;
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index bc74278ed31..9b0a94d85c3 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -11,7 +11,7 @@
 #ifndef __KIRKWOOD_MPP_H
 #define __KIRKWOOD_MPP_H
 
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
 	/* MPP number */		((_num) & 0xff) | \
 	/* MPP select value */		(((_sel) & 0xf) << 8) | \
 	/* may be input signal */	((!!(_in)) << 12) | \
@@ -19,282 +19,332 @@
 	/* available on F6180 */	((!!(_F6180)) << 14) | \
 	/* available on F6190 */	((!!(_F6190)) << 15) | \
 	/* available on F6192 */	((!!(_F6192)) << 16) | \
-	/* available on F6281 */	((!!(_F6281)) << 17))
+	/* available on F6281 */	((!!(_F6281)) << 17) | \
+	/* available on F6282 */	((!!(_F6282)) << 18))
 
 #define MPP_NUM(x)	((x) & 0xff)
 #define MPP_SEL(x)	(((x) >> 8) & 0xf)
 
-				/*   num sel  i  o  6180 6190 6192 6281 */
-
-#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
-#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
-
-#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
-#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
-#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
-#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
-
-#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
-
-#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,    1,  1,   1    )
-#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
-
-#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
-
-#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
-
-#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
-
-#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
-
-#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
-
-#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
-
-#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
-
-#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
-
-#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
-
-#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
-
-#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
-#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
-
-#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
-
-#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
-
-#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
-
-#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+				/*   num sel  i  o  6180 6190 6192 6281 6282 */
+
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0,   0 )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0,   0 )
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 1, 0, 0,   0,   0,   0,   1 )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP_MAX			49
 
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 5e6f711b1c6..c6b92b42eb4 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -155,7 +155,7 @@ static void __init mv88f6281gtw_ge_init(void)
 static int __init mv88f6281gtw_ge_pci_init(void)
 {
 	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 3ae158d7268..d26bf324738 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -39,6 +39,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
 #include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
@@ -126,6 +127,18 @@ static void __init netspace_v2_sata_power_init(void)
 	}
 	if (err)
 		pr_err("netspace_v2: failed to setup SATA0 power\n");
+
+	if (machine_is_netspace_max_v2()) {
+		err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
+		if (err == 0) {
+			err = gpio_direction_output(
+					NETSPACE_V2_GPIO_SATA1_POWER, 1);
+			if (err)
+				gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
+		}
+		if (err)
+			pr_err("netspace_v2: failed to setup SATA1 power\n");
+	}
 }
 
 /*****************************************************************************
@@ -160,36 +173,12 @@ static struct platform_device netspace_v2_gpio_buttons = {
  * GPIO LEDs
  ****************************************************************************/
 
-/*
- * The blue front LED is wired to a CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- *  cmd_led   |  slow_led  | /SATA active | LED state
- *            |            |              |
- *     1      |     0      |      x       |  off
- *     -      |     1      |      x       |  on
- *     0      |     0      |      1       |  on
- *     0      |     0      |      0       |  blink (rate 300ms)
- */
-
 #define NETSPACE_V2_GPIO_RED_LED	12
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name			= "ns_v2:blue:sata",
-		.default_trigger	= "default-on",
-		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.active_low		= 1,
-	},
-	{
-		.name			= "ns_v2:red:fail",
-		.gpio			= NETSPACE_V2_GPIO_RED_LED,
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -206,22 +195,33 @@ static struct platform_device netspace_v2_gpio_leds = {
 	},
 };
 
-static void __init netspace_v2_gpio_leds_init(void)
-{
-	int err;
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
 
-	/* Configure register slow_led to allow SATA activity LED blinking */
-	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
 
-	platform_device_register(&netspace_v2_gpio_leds);
-}
+static struct ns2_led netspace_v2_led_pins[] = {
+	{
+		.name	= "ns_v2:blue:sata",
+		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data netspace_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
+	.leds		= netspace_v2_led_pins,
+};
+
+static struct platform_device netspace_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_leds_data,
+	},
+};
 
 /*****************************************************************************
  * Timer
@@ -249,17 +249,21 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP4_NF_IO6,
 	MPP5_NF_IO7,
 	MPP6_SYSRST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP12_GPO,		/* Red led */
 	MPP14_GPIO,		/* USB fuse */
 	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
 	MPP18_NF_IO0,
 	MPP19_NF_IO1,
 	MPP20_SATA1_ACTn,
 	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
 	MPP24_GPIO,		/* USB mode select */
 	MPP25_GPIO,		/* Fan rotation fail */
 	MPP26_GPIO,		/* USB device vbus */
@@ -268,6 +272,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP30_GPIO,		/* Blue led (command register) */
 	MPP31_GPIO,		/* Board power off */
 	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
 	0
 };
 
@@ -299,7 +304,8 @@ static void __init netspace_v2_init(void)
 	i2c_register_board_info(0, netspace_v2_i2c_info,
 				ARRAY_SIZE(netspace_v2_i2c_info));
 
-	netspace_v2_gpio_leds_init();
+	platform_device_register(&netspace_v2_leds);
+	platform_device_register(&netspace_v2_gpio_leds);
 	platform_device_register(&netspace_v2_gpio_buttons);
 
 	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
@@ -332,3 +338,15 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.timer		= &netspace_v2_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 8a2bb0228e4..2bd14c5079d 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -270,8 +270,8 @@ static unsigned int net2big_v2_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -306,8 +306,8 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -315,20 +315,20 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP15_GPIO,		/* Rear power switch (auto|off) */
 	MPP16_GPIO,		/* SATA HDD1 power */
 	MPP17_GPIO,		/* SATA HDD2 power */
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
 	MPP28_GPIO,		/* USB enable host vbus */
 	MPP29_GPIO,		/* CPLD extension ALE */
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP34_GPIO,		/* Rear Push button */
 	MPP35_GPIO,		/* Inhibit switch power-off */
 	MPP36_GPIO,		/* SATA HDD1 presence */
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index ad3f1ec3379..fd64cd2b4e0 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-kirkwood/openrd-setup.c
  *
- * Marvell OpenRD (Base|Client) Board Setup
+ * Marvell OpenRD (Base|Client|Ultimate) Board Setup
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -73,9 +73,15 @@ static void __init openrd_init(void)
 
 	kirkwood_ehci_init();
 
+	if (machine_is_openrd_ultimate()) {
+		openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
+
 	kirkwood_ge00_init(&openrd_ge00_data);
-	if (machine_is_openrd_client())
+	if (!machine_is_openrd_base())
 		kirkwood_ge01_init(&openrd_ge01_data);
+
 	kirkwood_sata_init(&openrd_sata_data);
 	kirkwood_sdio_init(&openrd_mvsdio_data);
 
@@ -84,8 +90,10 @@ static void __init openrd_init(void)
 
 static int __init openrd_pci_init(void)
 {
-	if (machine_is_openrd_base() || machine_is_openrd_client())
-		kirkwood_pcie_init();
+	if (machine_is_openrd_base() ||
+	    machine_is_openrd_client() ||
+	    machine_is_openrd_ultimate())
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -116,3 +124,16 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index dee1eff50d3..55e7f00836b 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,29 +18,43 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+}
 
-#define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
+struct pcie_port {
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	int			irq;
+	struct resource		res[2];
+};
 
-void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+static int pcie_port_map[2];
+static int num_pcie_ports;
+
+static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
 {
-	*dev = orion_pcie_dev_id(PCIE_BASE);
-	*rev = orion_pcie_rev(PCIE_BASE);
+	struct pci_sys_data *sys = bus->sysdata;
+	return sys->private_data;
 }
 
-static int pcie_valid_config(int bus, int dev)
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
 	 * Don't go out when trying to access --
 	 * 1. nonexisting device on local bus
 	 * 2. where there's no device connected (no link)
 	 */
-	if (bus == 0 && dev == 0)
+	if (bus == pp->root_bus_nr && dev == 0)
 		return 1;
 
-	if (!orion_pcie_link_up(PCIE_BASE))
+	if (!orion_pcie_link_up(pp->base))
 		return 0;
 
-	if (bus == 0 && dev != 1)
+	if (bus == pp->root_bus_nr && dev != 1)
 		return 0;
 
 	return 1;
@@ -52,22 +66,22 @@ static int pcie_valid_config(int bus, int dev)
  * and then reading the PCIE_CONF_DATA register. Need to make sure these
  * transactions are atomic.
  */
-static DEFINE_SPINLOCK(kirkwood_pcie_lock);
 
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -75,15 +89,16 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -93,50 +108,98 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	struct resource *res;
-	extern unsigned int kirkwood_clk_ctrl;
+	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
-	 * Generic PCIe unit setup.
+	 * IORESOURCE_IO
 	 */
-	orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+	pp->res[0].name = "PCIe 0 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
 
 	/*
-	 * Request resources.
+	 * IORESOURCE_MEM
 	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("pcie_setup unable to alloc resources");
+	pp->res[1].name = "PCIe 0 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
+
+static void __init pcie1_ioresources_init(struct pcie_port *pp)
+{
+	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
 	 * IORESOURCE_IO
 	 */
-	res[0].name = "PCIe I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIe IO resource failed\n");
-	sys->resource[0] = &res[0];
+	pp->res[0].name = "PCIe 1 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
 
 	/*
 	 * IORESOURCE_MEM
 	 */
-	res[1].name = "PCIe Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
-	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	sys->resource[1] = &res[1];
+	pp->res[1].name = "PCIe 1 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
+
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	extern unsigned int kirkwood_clk_ctrl;
+	struct pcie_port *pp;
+	int index;
 
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	index = pcie_port_map[nr];
+	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		panic("PCIe: failed to allocate pcie_port data");
+	sys->private_data = pp;
+	pp->root_bus_nr = sys->busnr;
+	spin_lock_init(&pp->conf_lock);
+
+	switch (index) {
+	case 0:
+		kirkwood_clk_ctrl |= CGC_PEX0;
+		pcie0_ioresources_init(pp);
+		break;
+	case 1:
+		kirkwood_clk_ctrl |= CGC_PEX1;
+		pcie1_ioresources_init(pp);
+		break;
+	default:
+		panic("PCIe setup: invalid controller %d", index);
+	}
+
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe%d IO resource failed\n", index);
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe%d Memory resource failed\n", index);
+
+	sys->resource[0] = &pp->res[0];
+	sys->resource[1] = &pp->res[1];
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
-	kirkwood_clk_ctrl |= CGC_PEX0;
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
 
 	return 1;
 }
@@ -163,7 +226,7 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct pci_bus *bus;
 
-	if (nr == 0) {
+	if (nr < num_pcie_ports) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
 	} else {
 		bus = NULL;
@@ -175,18 +238,37 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	return IRQ_KIRKWOOD_PCIE;
+	struct pcie_port *pp = bus_to_port(dev->bus);
+
+	return pp->irq;
 }
 
 static struct hw_pci kirkwood_pci __initdata = {
-	.nr_controllers	= 1,
 	.swizzle	= pci_std_swizzle,
 	.setup		= kirkwood_pcie_setup,
 	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-void __init kirkwood_pcie_init(void)
+static void __init add_pcie_port(int index, unsigned long base)
 {
+	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		printk(KERN_INFO "link up\n");
+		pcie_port_map[num_pcie_ports++] = index;
+	} else
+		printk(KERN_INFO "link down, ignoring\n");
+}
+
+void __init kirkwood_pcie_init(unsigned int portmask)
+{
+	if (portmask & KW_PCIE0)
+		add_pcie_port(0, PCIE_VIRT_BASE);
+
+	if (portmask & KW_PCIE1)
+		add_pcie_port(1, PCIE1_VIRT_BASE);
+
+	kirkwood_pci.nr_controllers = num_pcie_ports;
 	pci_common_init(&kirkwood_pci);
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 3bf6304158f..c34718c2cfe 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -71,7 +71,7 @@ static void __init rd88f6192_init(void)
 static int __init rd88f6192_pci_init(void)
 {
 	if (machine_is_rd88f6192_nas())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31708ddbc83..3d1477135e1 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -107,7 +107,7 @@ static void __init rd88f6281_init(void)
 static int __init rd88f6281_pci_init(void)
 {
 	if (machine_is_rd88f6281())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
new file mode 100644
index 00000000000..d01bf89cedb
--- /dev/null
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -0,0 +1,194 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition hp_t5325_partitions[] = {
+	{
+		.name		= "u-boot env",
+		.size		= SZ_64K,
+		.offset		= SZ_512K + SZ_256K,
+	},
+	{
+		.name		= "permanent u-boot env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "HP env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+	{
+		.name		= "u-boot",
+		.size		= SZ_512K,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "SSD firmware",
+		.size		= SZ_256K,
+		.offset		= SZ_512K,
+	},
+};
+
+const struct flash_platform_data hp_t5325_flash = {
+	.type		= "mx25l8005",
+	.name		= "spi_flash",
+	.parts		= hp_t5325_partitions,
+	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
+};
+
+struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &hp_t5325_flash,
+		.irq		= -1,
+	},
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 45,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+	.buttons	= hp_t5325_buttons,
+	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &hp_t5325_button_data,
+	}
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_SPI_SCn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_SD_CLK,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP32_GPIO,
+	MPP33_GE1_TXCTL,
+	MPP39_AU_I2SBCLK,
+	MPP40_AU_I2SDO,
+	MPP41_AU_I2SLRCLK,
+	MPP42_AU_I2SMCLK,
+	MPP45_GPIO,		/* Power button */
+	MPP48_GPIO,		/* Board power off */
+	0
+};
+
+#define HP_T5325_GPIO_POWER_OFF		48
+
+static void hp_t5325_power_off(void)
+{
+	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+	kirkwood_uart0_init();
+	spi_register_board_info(hp_t5325_spi_slave_info,
+				ARRAY_SIZE(hp_t5325_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	kirkwood_ge00_init(&hp_t5325_ge00_data);
+	kirkwood_sata_init(&hp_t5325_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&hp_t5325_button_device);
+
+	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = hp_t5325_power_off;
+	else
+		pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+	if (machine_is_t5325())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= hp_t5325_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 2830f0fe80e..a5bd7fde04a 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -74,8 +74,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP4_SATA1_ACTn,
 	MPP5_SATA0_ACTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
@@ -83,6 +83,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
 	0
 };
 
@@ -110,10 +111,10 @@ static void __init qnap_ts219_init(void)
 
 static int __init ts219_pci_init(void)
 {
-   if (machine_is_ts219())
-           kirkwood_pcie_init();
+	if (machine_is_ts219())
+		kirkwood_pcie_init(KW_PCIE0);
 
-   return 0;
+	return 0;
 }
 subsys_initcall(ts219_pci_init);
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index de49c2d9e74..2e14afef07a 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -2,7 +2,7 @@
  *
  * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
  *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2009-2010  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <asm/mach-types.h>
@@ -26,6 +27,8 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+#define QNAP_TS41X_JUMPER_JP1	45
+
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
@@ -78,31 +81,31 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_PEX_RST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_SATA0_ACTn,
 	MPP16_SATA1_ACTn,
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	MPP37_GPIO,		/* Reset button */
 	MPP43_GPIO,		/* USB Copy button */
 	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
-	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP45_GPIO,		/* JP1: 0: LCD, 1: serial console */
 	MPP46_GPIO,		/* External SATA HDD1 error indicator */
 	MPP47_GPIO,		/* External SATA HDD2 error indicator */
 	MPP48_GPIO,		/* External SATA HDD3 error indicator */
@@ -131,12 +134,14 @@ static void __init qnap_ts41x_init(void)
 
 	pm_power_off = qnap_tsx1x_power_off;
 
+	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
 }
 
 static int __init ts41x_pci_init(void)
 {
 	if (machine_is_ts41x())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
    return 0;
 }
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 7221c20b2af..f781164e623 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -77,7 +77,7 @@ struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	},
 };
 
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
index 9a592962a6e..7fa037361b5 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 78499667eb7..5fcd082a17f 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -268,8 +268,8 @@ static void __init ks8695_pci_preinit(void)
 	__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
 
 	/* hook in fault handlers */
-	hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 }
 
 static void ks8695_show_pciregs(void)
diff --git a/arch/arm/mach-l7200/Makefile b/arch/arm/mach-l7200/Makefile
deleted file mode 100644
index 4bd8ebd70e7..00000000000
--- a/arch/arm/mach-l7200/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/arch/arm/mach-l7200/Makefile.boot b/arch/arm/mach-l7200/Makefile.boot
deleted file mode 100644
index 6c72ecbe6b6..00000000000
--- a/arch/arm/mach-l7200/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0xf0008000
-
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
deleted file mode 100644
index 50d23246d4f..00000000000
--- a/arch/arm/mach-l7200/core.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/mm/mm-lusl7200.c
- *
- *  Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- *  Extra MM routines for L7200 architecture
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <asm/types.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-/*
- * IRQ base register
- */
-#define	IRQ_BASE	(IO_BASE_2 + 0x1000)
-
-/* 
- * Normal IRQ registers
- */
-#define IRQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x000))
-#define IRQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x004))
-#define IRQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x008))
-#define IRQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x00c))
-#define IRQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x010))
-#define IRQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x018))
-
-/* 
- * Fast IRQ registers
- */
-#define FIQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x100))
-#define FIQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x104))
-#define FIQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x108))
-#define FIQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x10c))
-#define FIQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x110))
-#define FIQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x118))
-
-static void l7200_mask_irq(unsigned int irq)
-{
-	IRQ_ENABLECLEAR = 1 << irq;
-}
-
-static void l7200_unmask_irq(unsigned int irq)
-{
-	IRQ_ENABLE = 1 << irq;
-}
-
-static struct irq_chip l7200_irq_chip = {
-	.ack		= l7200_mask_irq,
-	.mask		= l7200_mask_irq,
-	.unmask		= l7200_unmask_irq
-};
- 
-static void __init l7200_init_irq(void)
-{
-	int irq;
-
-	IRQ_ENABLECLEAR = 0xffffffff;	/* clear all interrupt enables */
-	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		set_irq_chip(irq, &l7200_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-		set_irq_handler(irq, handle_level_irq);
-	}
-
-	init_FIQ();
-}
-
-static struct map_desc l7200_io_desc[] __initdata = {
-	{ IO_BASE,	IO_START,	IO_SIZE,	MT_DEVICE },
-	{ IO_BASE_2,	IO_START_2,	IO_SIZE_2,	MT_DEVICE },
-	{ AUX_BASE,     AUX_START,      AUX_SIZE,       MT_DEVICE },
-	{ FLASH1_BASE,  FLASH1_START,   FLASH1_SIZE,    MT_DEVICE },
-	{ FLASH2_BASE,  FLASH2_START,   FLASH2_SIZE,    MT_DEVICE }
-};
-
-static void __init l7200_map_io(void)
-{
-	iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc));
-}
-
-MACHINE_START(L7200, "LinkUp Systems L7200")
-	/* Maintainer: Steve Hill / Scott McConnell */
-	.phys_io	= 0x80040000,
-	.io_pg_offst	= ((0xd0000000) >> 18) & 0xfffc,
-	.map_io		= l7200_map_io,
-	.init_irq	= l7200_init_irq,
-MACHINE_END
-
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
deleted file mode 100644
index 4671558cdd5..00000000000
--- a/arch/arm/mach-l7200/include/mach/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <mach/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
deleted file mode 100644
index b69ed344c7c..00000000000
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-l7200/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
deleted file mode 100644
index 1726d91fc1d..00000000000
--- a/arch/arm/mach-l7200/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
deleted file mode 100644
index 2b7086a26b8..00000000000
--- a/arch/arm/mach-l7200/include/mach/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <mach/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
deleted file mode 100644
index c7b0a5d7b8b..00000000000
--- a/arch/arm/mach-l7200/include/mach/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      arch/arm/mach-l7200/include/mach/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
deleted file mode 100644
index c31909cfc25..00000000000
--- a/arch/arm/mach-l7200/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
deleted file mode 100644
index a770a89fb70..00000000000
--- a/arch/arm/mach-l7200/include/mach/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
deleted file mode 100644
index 7edffd713c5..00000000000
--- a/arch/arm/mach-l7200/include/mach/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
deleted file mode 100644
index 9fb40ed2f03..00000000000
--- a/arch/arm/mach-l7200/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
deleted file mode 100644
index 3959871e836..00000000000
--- a/arch/arm/mach-l7200/include/mach/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
deleted file mode 100644
index a2da7aedf20..00000000000
--- a/arch/arm/mach-l7200/include/mach/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
deleted file mode 100644
index adc05e5f837..00000000000
--- a/arch/arm/mach-l7200/include/mach/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
deleted file mode 100644
index 645f1c5e568..00000000000
--- a/arch/arm/mach-l7200/include/mach/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <mach/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
deleted file mode 100644
index 965728712cf..00000000000
--- a/arch/arm/mach-l7200/include/mach/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
deleted file mode 100644
index e9729a35751..00000000000
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
deleted file mode 100644
index e0dd3b6ae4a..00000000000
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
deleted file mode 100644
index 061771c2c2b..00000000000
--- a/arch/arm/mach-l7200/include/mach/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <mach/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
deleted file mode 100644
index ffc96a63b5a..00000000000
--- a/arch/arm/mach-l7200/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
deleted file mode 100644
index 591c962bb31..00000000000
--- a/arch/arm/mach-l7200/include/mach/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <mach/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
deleted file mode 100644
index 85f0abbf15f..00000000000
--- a/arch/arm/mach-l7200/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 189d20e543e..edb8f5faf5d 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -19,50 +19,6 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
 /*
  * Sparsemem version of the above
  */
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 00000000000..fde66350869
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,33 @@
+if ARCH_LPC32XX
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_UART3_SELECT
+	bool "Add support for standard UART3"
+	help
+	 Adds support for standard UART 3 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART4_SELECT
+	bool "Add support for standard UART4"
+	help
+	 Adds support for standard UART 4 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART5_SELECT
+	bool "Add support for standard UART5"
+	default y
+	help
+	 Adds support for standard UART 5 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART6_SELECT
+	bool "Add support for standard UART6"
+	help
+	 Adds support for standard UART 6 when the 8250 serial support
+	 is enabled.
+
+endmenu
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 00000000000..a5fc5d0eeae
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y	:= timer.o irq.o common.o serial.o clock.o
+obj-y	+= gpiolib.o pm.o suspend.o
+obj-y	+= phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 00000000000..b796b41ebf8
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x82000000
+
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 00000000000..32d63796430
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1137 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * LPC32xx clock management driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a caret are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ *                               32KHz oscillator*
+ *                               /      |      \
+ *                             RTC*   PLL397^ TOUCH
+ *                                     /
+ *               Main oscillator^     /
+ *                   |        \      /
+ *                   |         SYSCLK&
+ *                   |            \
+ *                   |             \
+ *                USB_PLL       HCLK_PLL&
+ *                   |           |    |
+ *            USB host/device  PCLK&  |
+ *                               |    |
+ *                             Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ *   clk_enable() and clk_disable() functions unless SYSCLK is based
+ *   on that clock. This allows the other oscillator that isn't driving
+ *   the HCLK PLL to be used as another system clock that can be routed
+ *   to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ *   this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ *   will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+static DEFINE_MUTEX(clkm_lock);
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+static const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+static unsigned long local_return_parent_rate(struct clk *clk)
+{
+	/*
+	 * If a clock has a rate of 0, then it inherits it's parent
+	 * clock rate
+	 */
+	while (clk->rate == 0)
+		clk = clk->parent;
+
+	return clk->rate;
+}
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+	.rate		= LPC32XX_CLOCK_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+	} else {
+		/* Enable PLL397 */
+		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+
+		/* Wait for PLL397 lock */
+		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+	} else {
+		/* Enable main oscillator */
+		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+		/* Wait for main oscillator to start */
+		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct clk osc_pll397 = {
+	.parent		= &osc_32KHz,
+	.enable		= local_pll397_enable,
+	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk osc_main = {
+	.enable		= local_oscmain_enable,
+	.rate		= LPC32XX_MAIN_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Convert a PLL register value to a PLL output frequency
+ */
+u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
+{
+	struct clk_pll_setup pllcfg;
+
+	pllcfg.cco_bypass_b15 = 0;
+	pllcfg.direct_output_b14 = 0;
+	pllcfg.fdbk_div_ctrl_b13 = 0;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
+		pllcfg.cco_bypass_b15 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
+		pllcfg.direct_output_b14 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
+		pllcfg.fdbk_div_ctrl_b13 = 1;
+	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
+	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
+	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
+
+	return clk_check_pll_setup(inputclk, &pllcfg);
+}
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+	u32 tv, tmp = 0;
+
+	if (PllSetup->analog_on != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
+	if (PllSetup->cco_bypass_b15 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
+	if (PllSetup->direct_output_b14 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+	if (PllSetup->fdbk_div_ctrl_b13 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+	tv = ffs(PllSetup->pll_p) - 1;
+	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
+		return 0;
+
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+	return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+	u32 clkin, pllreg;
+
+	clkin = clk_armpll.parent->rate;
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+
+	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+	struct clk_pll_setup *pllsetup)
+{
+	u32 ifreq, freqtol, m, n, p, fclkout;
+
+	/* Determine frequency tolerance limits */
+	freqtol = target_freq / 250;
+	ifreq = pllin_freq;
+
+	/* Is direct bypass mode possible? */
+	if (abs(pllin_freq - target_freq) <= freqtol) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 1;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_p = pll_postdivs[0];
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		return clk_check_pll_setup(ifreq, pllsetup);
+	} else if (target_freq <= ifreq) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 0;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		for (p = 0; p <= 3; p++) {
+			pllsetup->pll_p = pll_postdivs[p];
+			fclkout = clk_check_pll_setup(ifreq, pllsetup);
+			if (abs(target_freq - fclkout) <= freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is direct mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 1;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	pllsetup->pll_p = pll_postdivs[0];
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			/* Compute output frequency for this value */
+			pllsetup->pll_n = n;
+			pllsetup->pll_m = m;
+			fclkout = clk_check_pll_setup(ifreq,
+				pllsetup);
+			if (abs(target_freq - fclkout) <=
+				freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is integer mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 1;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	/* Try non-integer mode */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct clk clk_armpll = {
+	.parent		= &clk_sys,
+	.get_rate	= local_return_parent_rate,
+};
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
+	reg |= tmp;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return clk_check_pll_setup(clk_usbpll.parent->rate,
+		pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	int ret = -ENODEV;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable == 0) {
+		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/* Wait for PLL lock */
+		while ((timeout > jiffies) & (ret == -ENODEV)) {
+			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
+				ret = 0;
+		}
+
+		if (ret == 0) {
+			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+		}
+	}
+
+	return ret;
+}
+
+static unsigned long local_usbpll_round_rate(struct clk *clk,
+	unsigned long rate)
+{
+	u32 clkin, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->parent->rate;
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return 0;
+
+	return clk_check_pll_setup(clkin, &pllsetup);
+}
+
+static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 clkin, reg, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->get_rate(clk);
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return -EINVAL;
+
+	local_usbpll_enable(clk, 0);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	pllsetup.analog_on = 1;
+	local_clk_usbpll_setup(&pllsetup);
+
+	clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_usbpll = {
+	.parent		= &osc_main,
+	.set_rate	= local_usbpll_set_rate,
+	.enable		= local_usbpll_enable,
+	.rate		= 48000, /* In KHz */
+	.get_rate	= local_return_parent_rate,
+	.round_rate	= local_usbpll_round_rate,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+	static const u32 hclkdivs[4] = {1, 2, 4, 4};
+	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
+		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
+}
+
+static struct clk clk_hclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_pclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(clk->enable_reg);
+
+	if (enable == 0)
+		tmp &= ~clk->enable_mask;
+	else
+		tmp |= clk->enable_mask;
+
+	__raw_writel(tmp, clk->enable_reg);
+
+	return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer1 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_wdt = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_vfp9 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_dma = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart4 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart5 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart6 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
+	.enable_mask	= 0x4,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_kscan = {
+	.parent		= &osc_32KHz,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_nand = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_net = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
+	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_rtc = {
+	.parent		= &osc_32KHz,
+	.rate		= 1, /* 1 Hz */
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_usbd = {
+	.parent		= &clk_usbpll,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	/* Make sure 32KHz clock is the selected clock */
+	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+	if (enable == 0)
+		__raw_writel(0, clk->enable_reg);
+	else
+		__raw_writel(clk->enable_mask, clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk clk_tsc = {
+	.parent		= &osc_32KHz,
+	.enable		= tsc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	/* If rate is 0, disable clock */
+	if (enable != 0)
+		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static unsigned long mmc_get_rate(struct clk *clk)
+{
+	u32 div, rate, oldclk;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	/* Get the parent clock rate */
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Get the MMC controller clock divider value */
+	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+
+	if (!div)
+		div = 1;
+
+	return rate / div;
+}
+
+static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, prate;
+
+	/* Get the parent clock rate */
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		return prate;
+
+	div = prate / rate;
+	if (div > 0xf)
+		div = 0xf;
+
+	return prate / div;
+}
+
+static int mmc_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 oldclk, tmp;
+	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	div = prate / crate;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_mmc = {
+	.parent		= &clk_armpll,
+	.set_rate	= mmc_set_rate,
+	.get_rate	= mmc_get_rate,
+	.round_rate	= mmc_round_rate,
+	.enable		= mmc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static unsigned long clcd_get_rate(struct clk *clk)
+{
+	u32 tmp, div, rate, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Only supports internal clocking */
+	if (tmp & TIM2_BCD)
+		return rate;
+
+	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+	tmp = rate / (2 + div);
+
+	return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 tmp, prate, div, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate < prate) {
+		/* Find closest divider */
+		div = prate / rate;
+		if (div >= 2) {
+			div -= 2;
+			tmp &= ~TIM2_BCD;
+		}
+
+		tmp &= ~(0xF800001F);
+		tmp |= (div & 0x1F);
+		tmp |= (((div >> 5) & 0x1F) << 27);
+	}
+
+	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	return 0;
+}
+
+static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 prate, div;
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		rate = prate;
+	else {
+		div = prate / rate;
+		if (div > 0x3ff)
+			div = 0x3ff;
+
+		rate = prate / div;
+	}
+
+	return rate;
+}
+
+static struct clk clk_lcd = {
+	.parent		= &clk_hclk,
+	.set_rate	= clcd_set_rate,
+	.get_rate	= clcd_get_rate,
+	.round_rate	= clcd_round_rate,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+	mutex_lock(&clkm_lock);
+}
+
+static inline void clk_unlock(void)
+{
+	mutex_unlock(&clkm_lock);
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+	WARN_ON(clk->usecount == 0);
+
+	/* Don't attempt to disable clock if it has no users */
+	if (clk->usecount > 0) {
+		clk->usecount--;
+
+		/* Only disable clock when it has no more users */
+		if ((clk->usecount == 0) && (clk->enable))
+			clk->enable(clk, 0);
+
+		/* Check parent clocks, they may need to be disabled too */
+		if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	/* Enable parent clocks first and update use counts */
+	if (clk->parent)
+		ret = local_clk_enable(clk->parent);
+
+	if (!ret) {
+		/* Only enable clock if it's currently disabled */
+		if ((clk->usecount == 0) && (clk->enable))
+			ret = clk->enable(clk, 1);
+
+		if (!ret)
+			clk->usecount++;
+		else if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+
+	return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret;
+
+	clk_lock();
+	ret = local_clk_enable(clk);
+	clk_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+	clk_lock();
+	local_clk_disable(clk);
+	clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	clk_lock();
+	rate = clk->get_rate(clk);
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	/*
+	 * Most system clocks can only be enabled or disabled, with
+	 * the actual rate set as part of the peripheral dividers
+	 * instead of high level clock control
+	 */
+	if (clk->set_rate) {
+		clk_lock();
+		ret = clk->set_rate(clk, rate);
+		clk_unlock();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	clk_lock();
+
+	if (clk->round_rate)
+		rate = clk->round_rate(clk, rate);
+	else
+		rate = clk->get_rate(clk);
+
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	/* Clock re-parenting is not supported */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = (d), \
+		.con_id = (n), \
+		.clk = &(c), \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
+	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+	_REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/*
+	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
+	 * parent clock used for the ARM PLL and is used to derive
+	 * the many system clock rates in the device.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clk_sys.parent = &osc_main;
+	else
+		clk_sys.parent = &osc_pll397;
+
+	clk_sys.rate = clk_sys.parent->rate;
+
+	/* Compute the current ARM PLL and USB PLL frequencies */
+	local_update_armpll_rate();
+
+	/* Compute HCLK and PCLK bus rates */
+	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+	/*
+	 * Enable system clocks - this step is somewhat formal, as the
+	 * clocks are already running, but it does get the clock data
+	 * inline with the actual system state. Never disable these
+	 * clocks as they will only stop if the system is going to sleep.
+	 * In that case, the chip/system power management functions will
+	 * handle clock gating.
+	 */
+	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
+		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
+
+	/*
+	 * Timers 0 and 1 were enabled and are being used by the high
+	 * resolution tick function prior to this driver being initialized.
+	 * Tag them now as used.
+	 */
+	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
+		printk(KERN_ERR "Error enabling timer tick clocks\n");
+
+	return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 00000000000..c0a8434307f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+	struct list_head node;
+	struct clk *parent;
+	u32 rate;
+	u32 usecount;
+
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *clk);
+	int (*enable) (struct clk *, int);
+
+	/* Register address and bit mask for simple clocks */
+	void __iomem *enable_reg;
+	u32 enable_mask;
+};
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
new file mode 100644
index 00000000000..ee24dc28e93
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -0,0 +1,271 @@
+/*
+ * arch/arm/mach-lpc32xx/common.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/i2c.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Watchdog timer
+ */
+static struct resource watchdog_resources[] = {
+	[0] = {
+		.start = LPC32XX_WDTIM_BASE,
+		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device lpc32xx_watchdog_device = {
+	.name = "pnx4008-watchdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(watchdog_resources),
+	.resource = watchdog_resources,
+};
+
+/*
+ * I2C busses
+ */
+static struct i2c_pnx_data i2c0_data = {
+	.name = I2C_CHIP_NAME "1",
+	.base = LPC32XX_I2C1_BASE,
+	.irq = IRQ_LPC32XX_I2C_1,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+	.name = I2C_CHIP_NAME "2",
+	.base = LPC32XX_I2C2_BASE,
+	.irq = IRQ_LPC32XX_I2C_2,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+	.name = "USB-I2C",
+	.base = LPC32XX_OTG_I2C_BASE,
+	.irq = IRQ_LPC32XX_USB_I2C,
+};
+
+struct platform_device lpc32xx_i2c0_device = {
+	.name = "pnx-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &i2c0_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c1_device = {
+	.name = "pnx-i2c",
+	.id = 1,
+	.dev = {
+		.platform_data = &i2c1_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c2_device = {
+	.name = "pnx-i2c",
+	.id = 2,
+	.dev = {
+		.platform_data = &i2c2_data,
+	},
+};
+
+/*
+ * Returns the unique ID for the device
+ */
+void lpc32xx_get_uid(u32 devid[4])
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
+}
+
+/*
+ * Returns SYSCLK source
+ * 0 = PLL397, 1 = main oscillator
+ */
+int clk_is_sysclk_mainosc(void)
+{
+	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
+		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * System reset via the watchdog timer
+ */
+void lpc32xx_watchdog_reset(void)
+{
+	/* Make sure WDT clocks are enabled */
+	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
+
+	/* Instant assert of RESETOUT_N with pulse length 1mS */
+	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
+	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
+}
+
+/*
+ * Detects and returns IRAM size for the device variation
+ */
+#define LPC32XX_IRAM_BANK_SIZE SZ_128K
+static u32 iram_size;
+u32 lpc32xx_return_iram_size(void)
+{
+	if (iram_size == 0) {
+		u32 savedval1, savedval2;
+		void __iomem *iramptr1, *iramptr2;
+
+		iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
+		iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
+		savedval1 = __raw_readl(iramptr1);
+		savedval2 = __raw_readl(iramptr2);
+
+		if (savedval1 == savedval2) {
+			__raw_writel(savedval2 + 1, iramptr2);
+			if (__raw_readl(iramptr1) == savedval2 + 1)
+				iram_size = LPC32XX_IRAM_BANK_SIZE;
+			else
+				iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+			__raw_writel(savedval2, iramptr2);
+		} else
+			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+	}
+
+	return iram_size;
+}
+
+/*
+ * Computes PLL rate from PLL register and input clock
+ */
+u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
+{
+	u32 ilfreq, p, m, n, fcco, fref, cfreq;
+	int mode;
+
+	/*
+	 * PLL requirements
+	 * ifreq must be >= 1MHz and <= 20MHz
+	 * FCCO must be >= 156MHz and <= 320MHz
+	 * FREF must be >= 1MHz and <= 27MHz
+	 * Assume the passed input data is not valid
+	 */
+
+	ilfreq = ifreq;
+	m = pllsetup->pll_m;
+	n = pllsetup->pll_n;
+	p = pllsetup->pll_p;
+
+	mode = (pllsetup->cco_bypass_b15 << 2) |
+		(pllsetup->direct_output_b14 << 1) |
+	pllsetup->fdbk_div_ctrl_b13;
+
+	switch (mode) {
+	case 0x0: /* Non-integer mode */
+		cfreq = (m * ilfreq) / (2 * p * n);
+		fcco = (m * ilfreq) / n;
+		fref = ilfreq / n;
+		break;
+
+	case 0x1: /* integer mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = (m * ilfreq) / (n * 2 * p);
+		fref = ilfreq / n;
+		break;
+
+	case 0x2:
+	case 0x3: /* Direct mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = cfreq;
+		fref = ilfreq / n;
+		break;
+
+	case 0x4:
+	case 0x5: /* Bypass mode */
+		cfreq = ilfreq / (2 * p);
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+
+	case 0x6:
+	case 0x7: /* Direct bypass mode */
+	default:
+		cfreq = ilfreq;
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+	}
+
+	if (fcco < 156000000 || fcco > 320000000)
+		cfreq = 0;
+
+	if (fref < 1000000 || fref > 27000000)
+		cfreq = 0;
+
+	return (u32) cfreq;
+}
+
+u32 clk_get_pclk_div(void)
+{
+	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
+}
+
+static struct map_desc lpc32xx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
+		.length		= LPC32XX_AHB0_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
+		.length		= LPC32XX_AHB1_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
+		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
+		.length		= LPC32XX_FABAPB_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
+		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
+		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
+		.type		= MT_DEVICE
+	},
+};
+
+void __init lpc32xx_map_io(void)
+{
+	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
new file mode 100644
index 00000000000..f82211fd80c
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-lpc32xx/common.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009-2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_COMMON_H
+#define __LPC32XX_COMMON_H
+
+#include <linux/platform_device.h>
+
+/*
+ * Arch specific platform device structures
+ */
+extern struct platform_device lpc32xx_watchdog_device;
+extern struct platform_device lpc32xx_i2c0_device;
+extern struct platform_device lpc32xx_i2c1_device;
+extern struct platform_device lpc32xx_i2c2_device;
+
+/*
+ * Other arch specific structures and functions
+ */
+extern struct sys_timer lpc32xx_timer;
+extern void __init lpc32xx_init_irq(void);
+extern void __init lpc32xx_map_io(void);
+extern void __init lpc32xx_serial_init(void);
+extern void __init lpc32xx_gpio_init(void);
+
+/*
+ * Structure used for setting up and querying the PLLS
+ */
+struct clk_pll_setup {
+	int analog_on;
+	int cco_bypass_b15;
+	int direct_output_b14;
+	int fdbk_div_ctrl_b13;
+	int pll_p;
+	int pll_n;
+	u32 pll_m;
+};
+
+extern int clk_is_sysclk_mainosc(void);
+extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
+extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
+extern u32 clk_get_pclk_div(void);
+
+/*
+ * Returns the LPC32xx unique 128-bit chip ID
+ */
+extern void lpc32xx_get_uid(u32 devid[4]);
+
+extern void lpc32xx_watchdog_reset(void);
+extern u32 lpc32xx_return_iram_size(void);
+
+/*
+ * Pointers used for sizing and copying suspend function data
+ */
+extern int lpc32xx_sys_suspend(void);
+extern int lpc32xx_sys_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c
new file mode 100644
index 00000000000..69061ea8997
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/gpiolib.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+struct gpio_regs {
+	void __iomem *inp_state;
+	void __iomem *outp_set;
+	void __iomem *outp_clr;
+	void __iomem *dir_set;
+	void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpi000", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+	struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		__raw_writel(u, group->gpio_grp->dir_clr);
+	else
+		__raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		__raw_writel(u, group->gpio_grp->outp_set);
+	else
+		__raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = __raw_readl(group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
index 1ac4e1682e5..9bf0637e29c 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -1,5 +1,9 @@
 /*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,13 +14,12 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
 
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 383f1c04df0..621744d6b15 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -1,5 +1,9 @@
 /*
- *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,13 +14,18 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+/*
+ * Debug output is hardcoded to standard UART 5
+*/
+
+	.macro	addruart,rx, tmp
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1				@ MMU enabled?
+	ldreq	\rx, =0x40090000
+	ldrne	\rx, =0xF4090000
+	.endm
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..870227c9660
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+/*
+ * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
+ * as set if an interrupt is pending.
+ */
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
+	clz	\irqnr, \irqstat
+	rsb	\irqnr, \irqnr, #31
+	teq	\irqstat, #0
+	.endm
+
+	.macro	irq_prio_table
+	.endm
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 00000000000..67d03da1eee
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 00000000000..33e1dde37bd
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 00000000000..034dc9286bc
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/mach-lpc32xx/include/mach/io.h
index 13411709b13..9b59ab5cef8 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -1,5 +1,9 @@
 /*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,13 +14,14 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 00000000000..2667f52e3b0
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
+#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_LPC32XX_SUB1IRQ		0
+#define IRQ_LPC32XX_SUB2IRQ		1
+#define IRQ_LPC32XX_PWM3		3
+#define IRQ_LPC32XX_PWM4		4
+#define IRQ_LPC32XX_HSTIMER		5
+#define IRQ_LPC32XX_WATCH		6
+#define IRQ_LPC32XX_UART_IIR3		7
+#define IRQ_LPC32XX_UART_IIR4		8
+#define IRQ_LPC32XX_UART_IIR5		9
+#define IRQ_LPC32XX_UART_IIR6		10
+#define IRQ_LPC32XX_FLASH		11
+#define IRQ_LPC32XX_SD1			13
+#define IRQ_LPC32XX_LCD			14
+#define IRQ_LPC32XX_SD0			15
+#define IRQ_LPC32XX_TIMER0		16
+#define IRQ_LPC32XX_TIMER1		17
+#define IRQ_LPC32XX_TIMER2		18
+#define IRQ_LPC32XX_TIMER3		19
+#define IRQ_LPC32XX_SSP0		20
+#define IRQ_LPC32XX_SSP1		21
+#define IRQ_LPC32XX_I2S0		22
+#define IRQ_LPC32XX_I2S1		23
+#define IRQ_LPC32XX_UART_IIR7		24
+#define IRQ_LPC32XX_UART_IIR2		25
+#define IRQ_LPC32XX_UART_IIR1		26
+#define IRQ_LPC32XX_MSTIMER		27
+#define IRQ_LPC32XX_DMA			28
+#define IRQ_LPC32XX_ETHERNET		29
+#define IRQ_LPC32XX_SUB1FIQ		30
+#define IRQ_LPC32XX_SUB2FIQ		31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
+#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
+#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
+#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
+#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
+#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
+#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
+#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
+#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
+#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
+#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
+#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
+#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
+#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
+#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
+#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
+#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
+#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
+#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
+#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
+#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
+#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
+#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
+#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
+#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
+#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
+#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
+#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
+#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
+#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
+#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
+#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
+#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
+#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
+#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
+#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
+#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
+#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
+#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
+#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
+#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
+#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
+#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
+#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
+#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
+#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
+
+#define NR_IRQS				96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 00000000000..044e1acecbe
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET	UL(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 00000000000..14ea8d1aadb
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,694 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v)				((v) << (f))
+#define _BIT(n)					_SBF(n, 1)
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define LPC32XX_SLC_BASE			0x20020000
+#define LPC32XX_SSP0_BASE			0x20084000
+#define LPC32XX_SPI1_BASE			0x20088000
+#define LPC32XX_SSP1_BASE			0x2008C000
+#define LPC32XX_SPI2_BASE			0x20090000
+#define LPC32XX_I2S0_BASE			0x20094000
+#define LPC32XX_SD_BASE				0x20098000
+#define LPC32XX_I2S1_BASE			0x2009C000
+#define LPC32XX_MLC_BASE			0x200A8000
+#define LPC32XX_AHB0_START			LPC32XX_SLC_BASE
+#define LPC32XX_AHB0_SIZE			0x00089000
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define LPC32XX_DMA_BASE			0x31000000
+#define LPC32XX_USB_BASE			0x31020000
+#define LPC32XX_USBH_BASE			0x31020000
+#define LPC32XX_USB_OTG_BASE			0x31020000
+#define LPC32XX_OTG_I2C_BASE			0x31020300
+#define LPC32XX_LCD_BASE			0x31040000
+#define LPC32XX_ETHERNET_BASE			0x31060000
+#define LPC32XX_EMC_BASE			0x31080000
+#define LPC32XX_ETB_CFG_BASE			0x310C0000
+#define LPC32XX_ETB_DATA_BASE			0x310E0000
+#define LPC32XX_AHB1_START			LPC32XX_DMA_BASE
+#define LPC32XX_AHB1_SIZE			0x000E1000
+
+/*
+ * FAB physical base addresses
+ */
+#define LPC32XX_CLK_PM_BASE			0x40004000
+#define LPC32XX_MIC_BASE			0x40008000
+#define LPC32XX_SIC1_BASE			0x4000C000
+#define LPC32XX_SIC2_BASE			0x40010000
+#define LPC32XX_HS_UART1_BASE			0x40014000
+#define LPC32XX_HS_UART2_BASE			0x40018000
+#define LPC32XX_HS_UART7_BASE			0x4001C000
+#define LPC32XX_RTC_BASE			0x40024000
+#define LPC32XX_RTC_RAM_BASE			0x40024080
+#define LPC32XX_GPIO_BASE			0x40028000
+#define LPC32XX_PWM3_BASE			0x4002C000
+#define LPC32XX_PWM4_BASE			0x40030000
+#define LPC32XX_MSTIM_BASE			0x40034000
+#define LPC32XX_HSTIM_BASE			0x40038000
+#define LPC32XX_WDTIM_BASE			0x4003C000
+#define LPC32XX_DEBUG_CTRL_BASE			0x40040000
+#define LPC32XX_TIMER0_BASE			0x40044000
+#define LPC32XX_ADC_BASE			0x40048000
+#define LPC32XX_TIMER1_BASE			0x4004C000
+#define LPC32XX_KSCAN_BASE			0x40050000
+#define LPC32XX_UART_CTRL_BASE			0x40054000
+#define LPC32XX_TIMER2_BASE			0x40058000
+#define LPC32XX_PWM1_BASE			0x4005C000
+#define LPC32XX_PWM2_BASE			0x4005C004
+#define LPC32XX_TIMER3_BASE			0x40060000
+
+/*
+ * APB physical base addresses
+ */
+#define LPC32XX_UART3_BASE			0x40080000
+#define LPC32XX_UART4_BASE			0x40088000
+#define LPC32XX_UART5_BASE			0x40090000
+#define LPC32XX_UART6_BASE			0x40098000
+#define LPC32XX_I2C1_BASE			0x400A0000
+#define LPC32XX_I2C2_BASE			0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define LPC32XX_FABAPB_START			LPC32XX_CLK_PM_BASE
+#define LPC32XX_FABAPB_SIZE			0x000A5000
+
+/*
+ * Internal memory bases and sizes
+ */
+#define LPC32XX_IRAM_BASE			0x08000000
+#define LPC32XX_IROM_BASE			0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_CS0_BASE			0xE0000000
+#define LPC32XX_EMC_CS1_BASE			0xE1000000
+#define LPC32XX_EMC_CS2_BASE			0xE2000000
+#define LPC32XX_EMC_CS3_BASE			0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_DYCS0_BASE			0x80000000
+#define LPC32XX_EMC_DYCS1_BASE			0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+#define LPC32XX_CLOCK_OSC_FREQ			32768
+
+/*
+ * Clock and Power control register offsets
+ */
+#define _PMREG(x)				io_p2v(LPC32XX_CLK_PM_BASE +\
+						(x))
+#define LPC32XX_CLKPWR_DEBUG_CTRL		_PMREG(0x000)
+#define LPC32XX_CLKPWR_BOOTMAP			_PMREG(0x014)
+#define LPC32XX_CLKPWR_P01_ER			_PMREG(0x018)
+#define LPC32XX_CLKPWR_USBCLK_PDIV		_PMREG(0x01C)
+#define LPC32XX_CLKPWR_INT_ER			_PMREG(0x020)
+#define LPC32XX_CLKPWR_INT_RS			_PMREG(0x024)
+#define LPC32XX_CLKPWR_INT_SR			_PMREG(0x028)
+#define LPC32XX_CLKPWR_INT_AP			_PMREG(0x02C)
+#define LPC32XX_CLKPWR_PIN_ER			_PMREG(0x030)
+#define LPC32XX_CLKPWR_PIN_RS			_PMREG(0x034)
+#define LPC32XX_CLKPWR_PIN_SR			_PMREG(0x038)
+#define LPC32XX_CLKPWR_PIN_AP			_PMREG(0x03C)
+#define LPC32XX_CLKPWR_HCLK_DIV			_PMREG(0x040)
+#define LPC32XX_CLKPWR_PWR_CTRL			_PMREG(0x044)
+#define LPC32XX_CLKPWR_PLL397_CTRL		_PMREG(0x048)
+#define LPC32XX_CLKPWR_MAIN_OSC_CTRL		_PMREG(0x04C)
+#define LPC32XX_CLKPWR_SYSCLK_CTRL		_PMREG(0x050)
+#define LPC32XX_CLKPWR_LCDCLK_CTRL		_PMREG(0x054)
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL		_PMREG(0x058)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1		_PMREG(0x060)
+#define LPC32XX_CLKPWR_USB_CTRL			_PMREG(0x064)
+#define LPC32XX_CLKPWR_SDRAMCLK_CTRL		_PMREG(0x068)
+#define LPC32XX_CLKPWR_DDR_LAP_NOM		_PMREG(0x06C)
+#define LPC32XX_CLKPWR_DDR_LAP_COUNT		_PMREG(0x070)
+#define LPC32XX_CLKPWR_DDR_LAP_DELAY		_PMREG(0x074)
+#define LPC32XX_CLKPWR_SSP_CLK_CTRL		_PMREG(0x078)
+#define LPC32XX_CLKPWR_I2S_CLK_CTRL		_PMREG(0x07C)
+#define LPC32XX_CLKPWR_MS_CTRL			_PMREG(0x080)
+#define LPC32XX_CLKPWR_MACCLK_CTRL		_PMREG(0x090)
+#define LPC32XX_CLKPWR_TEST_CLK_SEL		_PMREG(0x0A4)
+#define LPC32XX_CLKPWR_SFW_INT			_PMREG(0x0A8)
+#define LPC32XX_CLKPWR_I2C_CLK_CTRL		_PMREG(0x0AC)
+#define LPC32XX_CLKPWR_KEY_CLK_CTRL		_PMREG(0x0B0)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL		_PMREG(0x0B4)
+#define LPC32XX_CLKPWR_PWM_CLK_CTRL		_PMREG(0x0B8)
+#define LPC32XX_CLKPWR_TIMER_CLK_CTRL		_PMREG(0x0BC)
+#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1	_PMREG(0x0C0)
+#define LPC32XX_CLKPWR_SPI_CLK_CTRL		_PMREG(0x0C4)
+#define LPC32XX_CLKPWR_NAND_CLK_CTRL		_PMREG(0x0C8)
+#define LPC32XX_CLKPWR_UART3_CLK_CTRL		_PMREG(0x0D0)
+#define LPC32XX_CLKPWR_UART4_CLK_CTRL		_PMREG(0x0D4)
+#define LPC32XX_CLKPWR_UART5_CLK_CTRL		_PMREG(0x0D8)
+#define LPC32XX_CLKPWR_UART6_CLK_CTRL		_PMREG(0x0DC)
+#define LPC32XX_CLKPWR_IRDA_CLK_CTRL		_PMREG(0x0E0)
+#define LPC32XX_CLKPWR_UART_CLK_CTRL		_PMREG(0x0E4)
+#define LPC32XX_CLKPWR_DMA_CLK_CTRL		_PMREG(0x0E8)
+#define LPC32XX_CLKPWR_AUTOCLOCK		_PMREG(0x0EC)
+#define LPC32XX_CLKPWR_DEVID(x)			_PMREG(0x130 + (x))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT	_BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT		_BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT	_BIT(31)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT	_BIT(27)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT	_BIT(24)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT	_BIT(22)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT	_BIT(21)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT	_BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK		0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define LPC32XX_CLKPWR_INTSRC_ADC_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT		_BIT(30)
+#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_INTSRC_RTC_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_INTSRC_USB_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_INTSRC_I2C_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_INTSRC_KEY_BIT		_BIT(16)
+#define LPC32XX_CLKPWR_INTSRC_MAC_BIT		_BIT(7)
+#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT		_BIT(6)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT	_BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT		_BIT(26)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT	_BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP	(0x0 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM	(0x1 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF	(0x2 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n)	((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK		_BIT(10)
+#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH		_BIT(9)
+#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH	_BIT(8)
+#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH	_BIT(7)
+#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN		_BIT(3)
+#define LPC32XX_CLKPWR_SELECT_RUN_MODE		_BIT(2)
+#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN		_BIT(1)
+#define LPC32XX_CLKPWR_STOP_MODE_CTRL		_BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS	_BIT(10)
+#define LPC32XX_CLKPWR_PLL397_BYPASS		_BIT(9)
+#define LPC32XX_CLKPWR_PLL397_BIAS_NORM		0x000
+#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5	0x040
+#define LPC32XX_CLKPWR_PLL397_BIAS_N25		0x080
+#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5	0x0C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5	0x100
+#define LPC32XX_CLKPWR_PLL397_BIAS_P25		0x140
+#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5	0x180
+#define LPC32XX_CLKPWR_PLL397_BIAS_P50		0x1C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_MASK		0x1C0
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS	_BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n)		(((n) & 0x7F) << 2)
+#define LPC32XX_CLKPWR_MOSC_CAP_MASK		(0x7F << 2)
+#define LPC32XX_CLKPWR_TEST_MODE		_BIT(1)
+#define LPC32XX_CLKPWR_MOSC_DISABLE		_BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n)	(((n) & 0x3FF) << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK		(0x3FF << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX	_BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12	0x000
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16	0x040
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15	0x080
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24	0x0C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M	0x100
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C	0x140
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M	0x180
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C	0x1C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK	0x01C0
+#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN		0x020
+#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n)	((n - 1) & 0x1F)
+#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK	0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP		_BIT(16)
+#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n)		(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n)	(((n) & 0xFF) << 0)
+#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL	_BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN		_BIT(24)
+#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN	_BIT(23)
+#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN	_BIT(22)
+#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN	_BIT(21)
+#define LPC32XX_CLKPWR_USBCTRL_PU_ADD		(0x0 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER	(0x1 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_PD_ADD		(0x3 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2		_BIT(18)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1		_BIT(17)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP	_BIT(16)
+#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n)	(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK	_BIT(22)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW		_BIT(21)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT	_BIT(20)
+#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET	_BIT(19)
+#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n)	(((n) & 0x1F) << 14)
+#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS	_BIT(13)
+#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n)	(((n) & 0x7) << 10)
+#define LPC32XX_CLKPWR_SDRCLK_USE_CAL		_BIT(9)
+#define LPC32XX_CLKPWR_SDRCLK_DO_CAL		_BIT(8)
+#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC	_BIT(7)
+#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_SDRCLK_USE_DDR		_BIT(1)
+#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS		_BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX	_BIT(5)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX	_BIT(4)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX	_BIT(3)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX	_BIT(2)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX	_BIT(6)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX	_BIT(5)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA	_BIT(4)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX	_BIT(3)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX	_BIT(2)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS	_BIT(10)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN	_BIT(9)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS	_BIT(8)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS	_BIT(7)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS	_BIT(6)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN		_BIT(5)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n)	((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS	0x00
+#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS	0x08
+#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS	0x18
+#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK		0x18
+#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN	_BIT(2)
+#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN	_BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK	(0x0 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC		(0x1 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC	(0x2 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK	(0x3 << 5)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN	_BIT(4)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK	(0x0 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK	(0x1 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK	(0x2 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC	(0x5 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN	_BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define LPC32XX_CLKPWR_SW_INT(n)		(_BIT(0) | (((n) & 0x7F) << 1))
+#define LPC32XX_CLKPWR_SW_GET_ARG(n)		(((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE	_BIT(4)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE	_BIT(3)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE	_BIT(2)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN	_BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n)	(((n) & 0xF) << 8)
+#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n)	(((n) & 0xF) << 4)
+#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK	0x8
+#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN	0x4
+#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK	0x2
+#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN	0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN	0x2
+#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN		0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN	0x20
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN	0x10
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN	0x08
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN	0x04
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN	0x02
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN	0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO	0x80
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK	0x40
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI2		0x20
+#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN	0x10
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO	0x08
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK	0x04
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI1		0x02
+#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN	0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC	0x20
+#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB		0x10
+#define LPC32XX_CLKPWR_NANDCLK_DMA_INT		0x08
+#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC		0x04
+#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN	0x02
+#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN	0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UART_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_UART_X_DIV(x)		(((x) & 0xFF) << 8)
+#define LPC32XX_CLKPWR_UART_USE_HCLK		_BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_IRDA_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_IRDA_X_DIV(x)		(((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN	_BIT(3)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN	_BIT(2)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN	_BIT(1)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN	_BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define LPC32XX_CLKPWR_AUTOCLK_USB_EN		0x40
+#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN		0x02
+#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN		0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define LPC32XX_INTC_MASK(x)			io_p2v((x) + 0x00)
+#define LPC32XX_INTC_RAW_STAT(x)		io_p2v((x) + 0x04)
+#define LPC32XX_INTC_STAT(x)			io_p2v((x) + 0x08)
+#define LPC32XX_INTC_POLAR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_INTC_ACT_TYPE(x)		io_p2v((x) + 0x10)
+#define LPC32XX_INTC_TYPE(x)			io_p2v((x) + 0x14)
+
+/*
+ * Timer/counter register offsets
+ */
+#define LCP32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
+#define LCP32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
+#define LCP32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
+#define LCP32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
+#define LCP32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
+#define LCP32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
+#define LCP32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
+#define LCP32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
+#define LCP32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
+#define LCP32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
+#define LCP32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
+#define LCP32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
+#define LCP32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
+#define LCP32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
+#define LCP32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
+#define LCP32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
+#define LCP32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
+#define LCP32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_TCR_EN		0x1
+#define LCP32XX_TIMER_CNTR_TCR_RESET		0x2
+
+/*
+ * mcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
+#define LCP32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
+#define LCP32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
+
+/*
+ * Standard UART register offsets
+ */
+#define LPC32XX_UART_DLL_FIFO(x)		io_p2v((x) + 0x00)
+#define LPC32XX_UART_DLM_IER(x)			io_p2v((x) + 0x04)
+#define LPC32XX_UART_IIR_FCR(x)			io_p2v((x) + 0x08)
+#define LPC32XX_UART_LCR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_UART_MODEM_CTRL(x)		io_p2v((x) + 0x10)
+#define LPC32XX_UART_LSR(x)			io_p2v((x) + 0x14)
+#define LPC32XX_UART_MODEM_STATUS(x)		io_p2v((x) + 0x18)
+#define LPC32XX_UART_RXLEV(x)			io_p2v((x) + 0x1C)
+
+/*
+ * UART control structure offsets
+ */
+#define _UCREG(x)				io_p2v(\
+						LPC32XX_UART_CTRL_BASE + (x))
+#define LPC32XX_UARTCTL_CTRL			_UCREG(0x00)
+#define LPC32XX_UARTCTL_CLKMODE			_UCREG(0x04)
+#define LPC32XX_UARTCTL_CLOOP			_UCREG(0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define LPC32XX_UART_U3_MD_CTRL_EN		_BIT(11)
+#define LPC32XX_UART_IRRX6_INV_EN		_BIT(10)
+#define LPC32XX_UART_HDPX_EN			_BIT(9)
+#define LPC32XX_UART_UART6_IRDAMOD_BYPASS	_BIT(5)
+#define LPC32XX_RT_IRTX6_INV_EN			_BIT(4)
+#define LPC32XX_RT_IRTX6_INV_MIR_EN		_BIT(3)
+#define LPC32XX_RT_RX_IRPULSE_3_16_115K		_BIT(2)
+#define LPC32XX_RT_TX_IRPULSE_3_16_115K		_BIT(1)
+#define LPC32XX_UART_U5_ROUTE_TO_USB		_BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define LPC32XX_UART_ENABLED_CLOCKS(n)		(((n) >> 16) & 0x7F)
+#define LPC32XX_UART_ENABLED_CLOCK(n, u)	(((n) >> (16 + (u))) & 0x1)
+#define LPC32XX_UART_ENABLED_CLKS_ANY		_BIT(14)
+#define LPC32XX_UART_CLKMODE_OFF		0x0
+#define LPC32XX_UART_CLKMODE_ON			0x1
+#define LPC32XX_UART_CLKMODE_AUTO		0x2
+#define LPC32XX_UART_CLKMODE_MASK(u)		(0x3 << ((((u) - 3) * 2) + 4))
+#define LPC32XX_UART_CLKMODE_LOAD(m, u)		((m) << ((((u) - 3) * 2) + 4))
+
+/*
+ * GPIO Module Register offsets
+ */
+#define _GPREG(x)				io_p2v(LPC32XX_GPIO_BASE + (x))
+#define LPC32XX_GPIO_P_MUX_SET			_GPREG(0x100)
+#define LPC32XX_GPIO_P_MUX_CLR			_GPREG(0x104)
+#define LPC32XX_GPIO_P_MUX_STATE		_GPREG(0x108)
+#define LPC32XX_GPIO_P3_MUX_SET			_GPREG(0x110)
+#define LPC32XX_GPIO_P3_MUX_CLR			_GPREG(0x114)
+#define LPC32XX_GPIO_P3_MUX_STATE		_GPREG(0x118)
+#define LPC32XX_GPIO_P0_MUX_SET			_GPREG(0x120)
+#define LPC32XX_GPIO_P0_MUX_CLR			_GPREG(0x124)
+#define LPC32XX_GPIO_P0_MUX_STATE		_GPREG(0x128)
+#define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
+#define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
+#define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 00000000000..df3b0dea4d7
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	extern void lpc32xx_watchdog_reset(void);
+
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: Rebooting system\n");
+
+		/* Disable interrupts */
+		local_irq_disable();
+
+		lpc32xx_watchdog_reset();
+		break;
+
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Wait for watchdog to reset system */
+	while (1)
+		;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 00000000000..8d4066b16b3
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE	13000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 00000000000..c142487d299
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+/*
+ * Uncompress output is hardcoded to standard UART 5
+ */
+
+#define UART_FIFO_CTL_TX_RESET	(1 << 2)
+#define UART_STATUS_TX_MT	(1 << 6)
+
+#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
+
+#define LPC32XX_UART_DLLFIFO_O	0x00
+#define LPC32XX_UART_IIRFCR_O	0x08
+#define LPC32XX_UART_LSR_O	0x14
+
+static inline void putc(int ch)
+{
+	/* Wait for transmit FIFO to empty */
+	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
+		UART_STATUS_TX_MT) == 0)
+		;
+
+	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
+}
+
+static inline void flush(void)
+{
+	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
+		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
+}
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..d1d936c7236
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	0xF0000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
new file mode 100644
index 00000000000..bd0df26c415
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -0,0 +1,432 @@
+/*
+ * arch/arm/mach-lpc32xx/irq.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Default value representing the Activation polarity of all internal
+ * interrupt sources
+ */
+#define MIC_APR_DEFAULT		0x3FF0EFE0
+#define SIC1_APR_DEFAULT	0xFBD27186
+#define SIC2_APR_DEFAULT	0x801810C0
+
+/*
+ * Default value representing the Activation Type of all internal
+ * interrupt sources. All are level sensitive.
+ */
+#define MIC_ATR_DEFAULT		0x00000000
+#define SIC1_ATR_DEFAULT	0x00026000
+#define SIC2_ATR_DEFAULT	0x00000000
+
+struct lpc32xx_event_group_regs {
+	void __iomem *enab_reg;
+	void __iomem *edge_reg;
+	void __iomem *maskstat_reg;
+	void __iomem *rawstat_reg;
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
+	.enab_reg = LPC32XX_CLKPWR_INT_ER,
+	.edge_reg = LPC32XX_CLKPWR_INT_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_INT_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_INT_RS,
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
+	.enab_reg = LPC32XX_CLKPWR_PIN_ER,
+	.edge_reg = LPC32XX_CLKPWR_PIN_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
+};
+
+struct lpc32xx_event_info {
+	const struct lpc32xx_event_group_regs *event_group;
+	u32 mask;
+};
+
+/*
+ * Maps an IRQ number to and event mask and register
+ */
+static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
+	[IRQ_LPC32XX_GPI_08] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
+	},
+	[IRQ_LPC32XX_GPI_09] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
+	},
+	[IRQ_LPC32XX_GPI_19] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
+	},
+	[IRQ_LPC32XX_GPI_07] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
+	},
+	[IRQ_LPC32XX_GPI_00] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
+	},
+	[IRQ_LPC32XX_GPI_01] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
+	},
+	[IRQ_LPC32XX_GPI_02] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
+	},
+	[IRQ_LPC32XX_GPI_03] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
+	},
+	[IRQ_LPC32XX_GPI_04] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
+	},
+	[IRQ_LPC32XX_GPI_05] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
+	},
+	[IRQ_LPC32XX_GPI_06] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_00] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_01] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_02] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_03] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_04] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_05] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
+	},
+	[IRQ_LPC32XX_KEY] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
+	},
+	[IRQ_LPC32XX_USB_OTG_ATX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
+	},
+	[IRQ_LPC32XX_USB_HOST] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
+	},
+	[IRQ_LPC32XX_RTC] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+	},
+	[IRQ_LPC32XX_MSTIMER] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
+	},
+	[IRQ_LPC32XX_TS_AUX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
+	},
+	[IRQ_LPC32XX_TS_P] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
+	},
+	[IRQ_LPC32XX_TS_IRQ] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
+	},
+};
+
+static void get_controller(unsigned int irq, unsigned int *base,
+	unsigned int *irqbit)
+{
+	if (irq < 32) {
+		*base = LPC32XX_MIC_BASE;
+		*irqbit = 1 << irq;
+	} else if (irq < 64) {
+		*base = LPC32XX_SIC1_BASE;
+		*irqbit = 1 << (irq - 32);
+	} else {
+		*base = LPC32XX_SIC2_BASE;
+		*irqbit = 1 << (irq - 64);
+	}
+}
+
+static void lpc32xx_mask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_unmask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_ack_irq(unsigned int irq)
+{
+	unsigned int ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
+
+	/* Also need to clear pending wake event */
+	if (lpc32xx_events[irq].mask != 0)
+		__raw_writel(lpc32xx_events[irq].mask,
+			lpc32xx_events[irq].event_group->rawstat_reg);
+}
+
+static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
+	int use_edge)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	/* Activation level, high or low */
+	reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
+	if (use_high_level)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
+
+	/* Activation type, edge or level */
+	reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
+	if (use_edge)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
+
+	/* Use same polarity for the wake events */
+	if (lpc32xx_events[irq].mask != 0) {
+		reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
+
+		if (use_high_level)
+			reg |= lpc32xx_events[irq].mask;
+		else
+			reg &= ~lpc32xx_events[irq].mask;
+
+		__raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
+	}
+}
+
+static int lpc32xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		/* Rising edge sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 1);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		/* Falling edge sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 1);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		/* Low level sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 0);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* High level sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 0);
+		break;
+
+	/* Other modes are not supported */
+	default:
+		return -EINVAL;
+	}
+
+	/* Ok to use the level handler for all types */
+	set_irq_handler(irq, handle_level_irq);
+
+	return 0;
+}
+
+static int lpc32xx_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long eventreg;
+
+	if (lpc32xx_events[irqno].mask != 0) {
+		eventreg = __raw_readl(lpc32xx_events[irqno].
+			event_group->enab_reg);
+
+		if (state)
+			eventreg |= lpc32xx_events[irqno].mask;
+		else
+			eventreg &= ~lpc32xx_events[irqno].mask;
+
+		__raw_writel(eventreg,
+			lpc32xx_events[irqno].event_group->enab_reg);
+
+		return 0;
+	}
+
+	/* Clear event */
+	__raw_writel(lpc32xx_events[irqno].mask,
+		lpc32xx_events[irqno].event_group->rawstat_reg);
+
+	return -ENODEV;
+}
+
+static void __init lpc32xx_set_default_mappings(unsigned int apr,
+	unsigned int atr, unsigned int offset)
+{
+	unsigned int i;
+
+	/* Set activation levels for each interrupt */
+	i = 0;
+	while (i < 32) {
+		__lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
+			((atr >> i) & 0x1));
+		i++;
+	}
+}
+
+static struct irq_chip lpc32xx_irq_chip = {
+	.ack = lpc32xx_ack_irq,
+	.mask = lpc32xx_mask_irq,
+	.unmask = lpc32xx_unmask_irq,
+	.set_type = lpc32xx_set_irq_type,
+	.set_wake = lpc32xx_irq_wake
+};
+
+static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
+	}
+}
+
+static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
+	}
+}
+
+void __init lpc32xx_init_irq(void)
+{
+	unsigned int i;
+
+	/* Setup MIC */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
+
+	/* Setup SIC1 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+
+	/* Setup SIC2 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+
+	/* Configure supported IRQ's */
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &lpc32xx_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* Set default mappings */
+	lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
+	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
+	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
+
+	/* mask all interrupts except SUBIRQ */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+
+	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
+	set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
+	set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
+
+	/* Initially disable all wake events */
+	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
+
+	/*
+	 * Default wake activation polarities, all pin sources are low edge
+	 * triggered
+	 */
+	__raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
+		LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
+		LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+		LPC32XX_CLKPWR_INT_AP);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
+
+	/* Clear latched wake event states */
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
+		LPC32XX_CLKPWR_PIN_RS);
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
+		LPC32XX_CLKPWR_INT_RS);
+}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
new file mode 100644
index 00000000000..bc9a42da214
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -0,0 +1,397 @@
+/*
+ * arch/arm/mach-lpc32xx/phy3250.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/amba/pl022.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Mapped GPIOLIB GPIOs
+ */
+#define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
+
+/*
+ * AMBA LCD controller
+ */
+static struct clcd_panel conn_lcd_panel = {
+	.mode		= {
+		.name		= "QVGA portrait",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 191828,
+		.left_margin	= 22,
+		.right_margin	= 11,
+		.upper_margin	= 2,
+		.lower_margin	= 1,
+		.hsync_len	= 5,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= (TIM2_IVS | TIM2_IHS),
+	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+				CNTL_LCDBPP16_565),
+	.bpp		= 16,
+};
+#define PANEL_SIZE (3 * SZ_64K)
+
+static int lpc32xx_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+		PANEL_SIZE, &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = PANEL_SIZE;
+	fb->panel = &conn_lcd_panel;
+
+	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			LCD_POWER_GPIO);
+	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			LCD_POWER_GPIO);
+
+	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			BKL_POWER_GPIO);
+	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			BKL_POWER_GPIO);
+
+	return 0;
+}
+
+static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+		fb->fb.screen_base, fb->fb.fix.smem_start,
+		fb->fb.fix.smem_len);
+}
+
+static void lpc32xx_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+/*
+ * On some early LCD modules (1307.0), the backlight logic is inverted.
+ * For those board variants, swap the disable and enable states for
+ * BKL_POWER_GPIO.
+*/
+static void clcd_disable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 0);
+	gpio_set_value(LCD_POWER_GPIO, 0);
+}
+
+static void clcd_enable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 1);
+	gpio_set_value(LCD_POWER_GPIO, 1);
+}
+
+static struct clcd_board lpc32xx_clcd_data = {
+	.name		= "Phytec LCD",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= clcd_disable,
+	.enable		= clcd_enable,
+	.setup		= lpc32xx_clcd_setup,
+	.mmap		= lpc32xx_clcd_mmap,
+	.remove		= lpc32xx_clcd_remove,
+};
+
+static struct amba_device lpc32xx_clcd_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:clcd",
+		.platform_data		= &lpc32xx_clcd_data,
+	},
+	.res				= {
+		.start			= LPC32XX_LCD_BASE,
+		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
+};
+
+/*
+ * AMBA SSP (SPI)
+ */
+static void phy3250_spi_cs_set(u32 control)
+{
+	gpio_set_value(SPI0_CS_GPIO, (int) control);
+}
+
+static struct pl022_config_chip spi0_chip_info = {
+	.lbm			= LOOPBACK_DISABLED,
+	.com_mode		= INTERRUPT_TRANSFER,
+	.iface			= SSP_INTERFACE_MOTOROLA_SPI,
+	.hierarchy		= SSP_MASTER,
+	.slave_tx_disable	= 0,
+	.endian_tx		= SSP_TX_LSB,
+	.endian_rx		= SSP_RX_LSB,
+	.data_size		= SSP_DATA_BITS_8,
+	.rx_lev_trig		= SSP_RX_4_OR_MORE_ELEM,
+	.tx_lev_trig		= SSP_TX_4_OR_MORE_EMPTY_LOC,
+	.clk_phase		= SSP_CLK_FIRST_EDGE,
+	.clk_pol		= SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len		= SSP_BITS_8,
+	.wait_state		= SSP_MWIRE_WAIT_ZERO,
+	.duplex			= SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	.cs_control		= phy3250_spi_cs_set,
+};
+
+static struct pl022_ssp_controller lpc32xx_ssp0_data = {
+	.bus_id			= 0,
+	.num_chipselect		= 1,
+	.enable_dma		= 0,
+};
+
+static struct amba_device lpc32xx_ssp0_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:ssp0",
+		.platform_data		= &lpc32xx_ssp0_data,
+	},
+	.res				= {
+		.start			= LPC32XX_SSP0_BASE,
+		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
+};
+
+/* AT25 driver registration */
+static int __init phy3250_spi_board_register(void)
+{
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "spidev",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+
+#else
+	static struct spi_eeprom eeprom = {
+		.name = "at25256a",
+		.byte_len = 0x8000,
+		.page_size = 64,
+		.flags = EE_ADDR2,
+	};
+
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "at25",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.platform_data = &eeprom,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+#endif
+	return spi_register_board_info(info, ARRAY_SIZE(info));
+}
+arch_initcall(phy3250_spi_board_register);
+
+static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led phy_leds[] = {
+	{
+		.name			= "led0",
+		.gpio			= LED_GPIO,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
+static struct gpio_led_platform_data led_data = {
+	.leds = phy_leds,
+	.num_leds = ARRAY_SIZE(phy_leds),
+};
+
+static struct platform_device lpc32xx_gpio_led_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &led_data,
+};
+
+static struct platform_device *phy3250_devs[] __initdata = {
+	&lpc32xx_i2c0_device,
+	&lpc32xx_i2c1_device,
+	&lpc32xx_i2c2_device,
+	&lpc32xx_watchdog_device,
+	&lpc32xx_gpio_led_device,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&lpc32xx_clcd_device,
+	&lpc32xx_ssp0_device,
+};
+
+/*
+ * Board specific functions
+ */
+static void __init phy3250_board_init(void)
+{
+	u32 tmp;
+	int i;
+
+	lpc32xx_gpio_init();
+
+	/* Register GPIOs used on this board */
+	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			SPI0_CS_GPIO);
+	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			SPI0_CS_GPIO);
+
+	/* Setup network interface for RMII mode */
+	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+
+	/* Setup SLC NAND controller muxing */
+	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
+		LPC32XX_CLKPWR_NAND_CLK_CTRL);
+
+	/* Setup LCD muxing to RGB565 */
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
+		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
+		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
+	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
+	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	/* Set up I2C pull levels */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
+	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
+		LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
+
+	/* Disable IrDA pulsing support on UART6 */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	/* Enable DMA for I2S1 channel */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
+	tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
+
+	lpc32xx_serial_init();
+
+	/*
+	 * AMBA peripheral clocks need to be enabled prior to AMBA device
+	 * detection or a data fault will occur, so enable the clocks
+	 * here. However, we don't want to enable them if the peripheral
+	 * isn't included in the image
+	 */
+#ifdef CONFIG_FB_ARMCLCD
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+#endif
+#ifdef CONFIG_SPI_PL022
+	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
+		LPC32XX_CLKPWR_SSP_CLK_CTRL);
+#endif
+
+	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+	/* Test clock needed for UDA1380 initial init */
+	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
+		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
+		LPC32XX_CLKPWR_TEST_CLK_SEL);
+
+	i2c_register_board_info(0, phy3250_i2c_board_info,
+		ARRAY_SIZE(phy3250_i2c_board_info));
+}
+
+static int __init lpc32xx_display_uid(void)
+{
+	u32 uid[4];
+
+	lpc32xx_get_uid(uid);
+
+	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+		uid[3], uid[2], uid[1], uid[0]);
+
+	return 1;
+}
+arch_initcall(lpc32xx_display_uid);
+
+MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
+	/* Maintainer: Kevin Wells, NXP Semiconductors */
+	.phys_io	= LPC32XX_UART5_BASE,
+	.io_pg_offst	= ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= lpc32xx_map_io,
+	.init_irq	= lpc32xx_init_irq,
+	.timer		= &lpc32xx_timer,
+	.init_machine	= phy3250_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
new file mode 100644
index 00000000000..a6e2aed9a49
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-lpc32xx/pm.c
+ *
+ * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * LPC32XX CPU and system power management
+ *
+ * The LCP32XX has three CPU modes for controlling system power: run,
+ * direct-run, and halt modes. When switching between halt and run modes,
+ * the CPU transistions through direct-run mode. For Linux, direct-run
+ * mode is not used in normal operation. Halt mode is used when the
+ * system is fully suspended.
+ *
+ * Run mode:
+ * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
+ * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
+ * the HCLK_PLL rate. Linux runs in this mode.
+ *
+ * Direct-run mode:
+ * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
+ * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
+ * source or the frequency of the main oscillator. In this mode, the
+ * HCLK_PLL can be safely enabled, changed, or disabled.
+ *
+ * Halt mode:
+ * SYSCLK is gated off and the CPU and system clocks are halted.
+ * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
+ * key scanner, etc.) still operate if enabled. In this state, an enabled
+ * system event (ie, GPIO state change, RTC match, key press, etc.) will
+ * wake the system up back into direct-run mode.
+ *
+ * DRAM refresh
+ * DRAM clocking and refresh are slightly different for systems with DDR
+ * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
+ * SDRAM will still be accessible in direct-run mode. In DDR based systems,
+ * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * Because of this, the code to switch power modes and the code to enter
+ * and exit DRAM self-refresh modes must not be executed in DRAM. A small
+ * section of IRAM is used instead for this.
+ *
+ * Suspend is handled with the following logic:
+ *  Backup a small area of IRAM used for the suspend code
+ *  Copy suspend code to IRAM
+ *  Transfer control to code in IRAM
+ *  Places DRAMs in self-refresh mode
+ *  Enter direct-run mode
+ *  Save state of HCLK_PLL PLL
+ *  Disable HCLK_PLL PLL
+ *  Enter halt mode - CPU and buses will stop
+ *  System enters direct-run mode when an enabled event occurs
+ *  HCLK PLL state is restored
+ *  Run mode is entered
+ *  DRAMS are placed back into normal mode
+ *  Code execution returns from IRAM
+ *  IRAM code are used for suspend is restored
+ *  Suspend mode is exited
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+#include "clock.h"
+
+#define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
+
+/*
+ * Both STANDBY and MEM suspend states are handled the same with no
+ * loss of CPU or memory state
+ */
+static int lpc32xx_pm_enter(suspend_state_t state)
+{
+	int (*lpc32xx_suspend_ptr) (void);
+	void *iram_swap_area;
+
+	/* Allocate some space for temporary IRAM storage */
+	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
+	if (!iram_swap_area) {
+		printk(KERN_ERR
+		       "PM Suspend: cannot allocate memory to save portion "
+			"of SRAM\n");
+		return -ENOMEM;
+	}
+
+	/* Backup a small area of IRAM used for the suspend code */
+	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
+		lpc32xx_sys_suspend_sz);
+
+	/*
+	 * Copy code to suspend system into IRAM. The suspend code
+	 * needs to run from IRAM as DRAM may no longer be available
+	 * when the PLL is stopped.
+	 */
+	memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
+		lpc32xx_sys_suspend_sz);
+	flush_icache_range((unsigned long)TEMP_IRAM_AREA,
+		(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
+
+	/* Transfer to suspend code in IRAM */
+	lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
+	flush_cache_all();
+	(void) lpc32xx_suspend_ptr();
+
+	/* Restore original IRAM contents */
+	memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
+		lpc32xx_sys_suspend_sz);
+
+	kfree(iram_swap_area);
+
+	return 0;
+}
+
+static struct platform_suspend_ops lpc32xx_pm_ops = {
+	.valid	= suspend_valid_only_mem,
+	.enter	= lpc32xx_pm_enter,
+};
+
+#define EMC_DYN_MEM_CTRL_OFS 0x20
+#define EMC_SRMMC           (1 << 3)
+#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
+static int __init lpc32xx_pm_init(void)
+{
+	/*
+	 * Setup SDRAM self-refresh clock to automatically disable o
+	 * start of self-refresh. This only needs to be done once.
+	 */
+	__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
+
+	suspend_set_ops(&lpc32xx_pm_ops);
+
+	return 0;
+}
+arch_initcall(lpc32xx_pm_init);
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
new file mode 100644
index 00000000000..429cfdbb2b3
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-lpc32xx/serial.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_SUART_FIFO_SIZE	64
+
+/* Standard 8250/16550 compatible serial ports */
+static struct plat_serial8250_port serial_std_platform_data[] = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.membase        = io_p2v(LPC32XX_UART5_BASE),
+		.mapbase        = LPC32XX_UART5_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR5,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART3_BASE),
+		.mapbase        = LPC32XX_UART3_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR3,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART4_BASE),
+		.mapbase        = LPC32XX_UART4_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR4,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART6_BASE),
+		.mapbase        = LPC32XX_UART6_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR6,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+struct uartinit {
+	char *uart_ck_name;
+	u32 ck_mode_mask;
+	void __iomem *pdiv_clk_reg;
+};
+
+static struct uartinit uartinit_data[] __initdata = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.uart_ck_name = "uart5_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.uart_ck_name = "uart3_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.uart_ck_name = "uart4_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.uart_ck_name = "uart6_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+	},
+#endif
+};
+
+static struct platform_device serial_std_platform_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_std_platform_data,
+	},
+};
+
+static struct platform_device *lpc32xx_serial_devs[] __initdata = {
+	&serial_std_platform_device,
+};
+
+void __init lpc32xx_serial_init(void)
+{
+	u32 tmp, clkmodes = 0;
+	struct clk *clk;
+	unsigned int puart;
+	int i, j;
+
+	/* UART clocks are off, let clock driver manage them */
+	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
+		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			serial_std_platform_data[i].uartclk =
+				clk_get_rate(clk);
+		}
+
+		/* Fall back on main osc rate if clock rate return fails */
+		if (serial_std_platform_data[i].uartclk == 0)
+			serial_std_platform_data[i].uartclk =
+				LPC32XX_MAIN_OSC_FREQ;
+
+		/* Setup UART clock modes for all UARTs, disable autoclock */
+		clkmodes |= uartinit_data[i].ck_mode_mask;
+
+		/* pre-UART clock divider set to 1 */
+		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+	}
+
+	/* This needs to be done after all UART clocks are setup */
+	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
+	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+		/* Force a flush of the RX FIFOs to work around a HW bug */
+		puart = serial_std_platform_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
+	}
+
+	/* Disable UART5->USB transparent mode or USB won't work */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	platform_add_devices(lpc32xx_serial_devs,
+		ARRAY_SIZE(lpc32xx_serial_devs));
+}
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
new file mode 100644
index 00000000000..374f9f07fe4
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-lpc32xx/suspend.S
+ *
+ * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/* Using named register defines makes the code easier to follow */
+#define WORK1_REG			r0
+#define WORK2_REG			r1
+#define SAVED_HCLK_DIV_REG		r2
+#define SAVED_HCLK_PLL_REG		r3
+#define SAVED_DRAM_CLKCTRL_REG		r4
+#define SAVED_PWR_CTRL_REG		r5
+#define CLKPWRBASE_REG			r6
+#define EMCBASE_REG			r7
+
+#define LPC32XX_EMC_STATUS_OFFS		0x04
+#define LPC32XX_EMC_STATUS_BUSY		0x1
+#define LPC32XX_EMC_STATUS_SELF_RFSH	0x4
+
+#define LPC32XX_CLKPWR_PWR_CTRL_OFFS	0x44
+#define LPC32XX_CLKPWR_HCLK_DIV_OFFS	0x40
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
+
+#define CLKPWR_PCLK_DIV_MASK		0xFFFFFE7F
+
+	.text
+
+ENTRY(lpc32xx_sys_suspend)
+	@ Save a copy of the used registers in IRAM, r0 is corrupted
+	adr	r0, tmp_stack_end
+	stmfd	r0!, {r3 - r7, sp, lr}
+
+	@ Load a few common register addresses
+	adr	WORK1_REG, reg_bases
+	ldr	CLKPWRBASE_REG, [WORK1_REG, #0]
+	ldr	EMCBASE_REG, [WORK1_REG, #4]
+
+	ldr	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
+
+	@ Wait for SDRAM busy status to go busy and then idle
+	@ This guarantees a small windows where DRAM isn't busy
+1:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	bne	1b @ Branch while idle
+2:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	beq	2b @ Branch until idle
+
+	@ Setup self-refresh with support for manual exit of
+	@ self-refresh mode
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for self-refresh acknowledge, clocks to the DRAM device
+	@ will automatically stop on start of self-refresh
+3:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	3b @ Branch until self-refresh mode starts
+
+	@ Enter direct-run mode from run mode
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Safe disable of DRAM clock in EMC block, prevents DDR sync
+	@ issues on restart
+	ldr	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+	and	WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Save HCLK PLL state and disable HCLK PLL
+	ldr	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	bic	WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+
+	@ Enter stop mode until an enabled event occurs
+	orr	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	.rept 9
+	nop
+	.endr
+
+	@ Clear stop status
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+
+	@ Restore original HCLK PLL value and wait for PLL lock
+	str	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+4:
+	ldr	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
+	bne	4b
+
+	@ Re-enter run mode with self-refresh flag cleared, but no DRAM
+	@ update yet. DRAM is still in self-refresh
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Restore original DRAM clock mode to restore DRAM clocks
+	str	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Clear self-refresh mode
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG,\
+		#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for EMC to clear self-refresh mode
+5:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	5b @ Branch until self-refresh has exited
+
+	@ restore regs and return
+	adr	r0, tmp_stack
+	ldmfd	r0!, {r3 - r7, sp, pc}
+
+reg_bases:
+	.long	IO_ADDRESS(LPC32XX_CLK_PM_BASE)
+	.long	IO_ADDRESS(LPC32XX_EMC_BASE)
+
+tmp_stack:
+	.long	0, 0, 0, 0, 0, 0, 0
+tmp_stack_end:
+
+ENTRY(lpc32xx_sys_suspend_sz)
+	.word	. - lpc32xx_sys_suspend
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
new file mode 100644
index 00000000000..630dd4a74b2
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mach-lpc32xx/timer.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009 - 2010 NXP Semiconductors
+ * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
+ *                    Ed Schouten <e.schouten@fontys.nl>
+ *                    Laurens Timmermans <l.timmermans@fontys.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
+{
+	return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
+}
+
+static struct clocksource lpc32xx_clksrc = {
+	.name	= "lpc32xx_clksrc",
+	.shift	= 24,
+	.rating	= 300,
+	.read	= lpc32xx_clksrc_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+    struct clock_event_device *dev)
+{
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+
+	return 0;
+}
+
+static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
+    struct clock_event_device *dev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		WARN_ON(1);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/*
+		 * Disable the timer. When using oneshot, we must also
+		 * disable the timer to wait for the first call to
+		 * set_next_event().
+		 */
+		__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device lpc32xx_clkevt = {
+	.name		= "lpc32xx_clkevt",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= lpc32xx_clkevt_next_event,
+	.set_mode	= lpc32xx_clkevt_mode,
+};
+
+static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &lpc32xx_clkevt;
+
+	/* Clear match */
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction lpc32xx_timer_irq = {
+	.name		= "LPC32XX Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= lpc32xx_timer_interrupt,
+};
+
+/*
+ * The clock management driver isn't initialized at this point, so the
+ * clocks need to be enabled here manually and then tagged as used in
+ * the clock driver initialization
+ */
+static void __init lpc32xx_timer_init(void)
+{
+	u32 clkrate, pllreg;
+
+	/* Enable timer clock */
+	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
+		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
+
+	/*
+	 * The clock driver isn't initialized at this point. So determine if
+	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
+	 * it to compute the PLL frequency and the PCLK divider to get the base
+	 * timer rates. This rate is needed to compute the tick rate.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clkrate = LPC32XX_MAIN_OSC_FREQ;
+	else
+		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
+
+	/* Get ARM HCLKPLL register and convert it into a frequency */
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
+
+	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
+	clkrate = clkrate / clk_get_pclk_div();
+
+	/* Initial timer setup */
+	__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+	__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
+		LCP32XX_TIMER_CNTR_MCR_STOP(0) |
+		LCP32XX_TIMER_CNTR_MCR_RESET(0),
+		LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+
+	/* Setup tick interrupt */
+	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
+
+	/* Setup the clockevent structure. */
+	lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
+		lpc32xx_clkevt.shift);
+	lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
+		&lpc32xx_clkevt);
+	lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
+		&lpc32xx_clkevt) + 1;
+	lpc32xx_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&lpc32xx_clkevt);
+
+	/* Use timer1 as clock source. */
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
+		lpc32xx_clksrc.shift);
+	clocksource_register(&lpc32xx_clksrc);
+}
+
+struct sys_timer lpc32xx_timer = {
+	.init		= &lpc32xx_timer_init,
+};
+
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 66677f0acae..7ff8020d4d2 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
-obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
new file mode 100644
index 00000000000..523d213bf79
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "board-trout.h"
+
+struct msm_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*reg;	/* Base of register bank */
+	u8			shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	return !!(readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	if (val)
+		msm_gpio->shadow |= mask;
+	else
+		msm_gpio->shadow &= ~mask;
+
+	writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	msm_gpiolib_set(chip, offset, 0);
+	return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	msm_gpiolib_set(chip, offset, val);
+	return 0;
+}
+
+#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = msm_gpiolib_direction_input,\
+			.direction_output = msm_gpiolib_direction_output, \
+			.get		  = msm_gpiolib_get,		\
+			.set		  = msm_gpiolib_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = 8,				\
+		},							\
+		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
+		.shadow = shadow_val,					\
+	}
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+	/* H2W pins <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
+#else
+	/* H2W pins <-> UART3, Bluetooth <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x80),
+#endif
+	/* I2C pull */
+	TROUT_GPIO_BANK("MISC3", 0x02,   TROUT_GPIO_MISC3_BASE, 0x04),
+	TROUT_GPIO_BANK("MISC4", 0x04,   TROUT_GPIO_MISC4_BASE, 0),
+	/* mmdi 32k en */
+	TROUT_GPIO_BANK("MISC5", 0x06,   TROUT_GPIO_MISC5_BASE, 0x04),
+	TROUT_GPIO_BANK("INT2", 0x08,    TROUT_GPIO_INT2_BASE,  0),
+	TROUT_GPIO_BANK("MISC1", 0x0a,   TROUT_GPIO_MISC1_BASE, 0),
+	TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
+};
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init trout_init_gpio(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+		gpiochip_add(&msm_gpio_banks[i].chip);
+
+	return 0;
+}
+
+postcore_initcall(trout_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index dca5a5f062d..e69a1502e4e 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -50,7 +50,6 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
 {
 	mi->nr_banks = 1;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = (101*1024*1024);
 }
 
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5a0a6..651851c3e1d 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -1,5 +1,162 @@
+/* linux/arch/arm/mach-msm/board-trout.h
+** Author: Brian Swetland <swetland@google.com>
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE		0x00000000
+#define MSM_SMI_SIZE		0x00800000
+
+#define MSM_EBI_BASE		0x10000000
+#define MSM_EBI_SIZE		0x06e00000
+
+#define MSM_PMEM_GPU0_BASE	0x00000000
+#define MSM_PMEM_GPU0_SIZE	0x00700000
+
+#define MSM_PMEM_MDP_BASE	0x02000000
+#define MSM_PMEM_MDP_SIZE	0x00800000
+
+#define MSM_PMEM_ADSP_BASE      0x02800000
+#define MSM_PMEM_ADSP_SIZE	0x00800000
+
+#define MSM_PMEM_CAMERA_BASE	0x03000000
+#define MSM_PMEM_CAMERA_SIZE	0x00800000
+
+#define MSM_FB_BASE		0x03800000
+#define MSM_FB_SIZE		0x00100000
+
+#define MSM_LINUX_BASE		MSM_EBI_BASE
+#define MSM_LINUX_SIZE		0x06500000
+
+#define MSM_PMEM_GPU1_SIZE	0x800000
+#define MSM_PMEM_GPU1_BASE	(MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
+
+#define MSM_RAM_CONSOLE_BASE	(MSM_EBI_BASE + 0x6d00000)
+#define MSM_RAM_CONSOLE_SIZE	(128 * SZ_1K)
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define TROUT_4_BALL_UP_0     1
+#define TROUT_4_BALL_LEFT_0   18
+#define TROUT_4_BALL_DOWN_0   57
+#define TROUT_4_BALL_RIGHT_0  91
+
+#define TROUT_5_BALL_UP_0     94
+#define TROUT_5_BALL_LEFT_0   18
+#define TROUT_5_BALL_DOWN_0   90
+#define TROUT_5_BALL_RIGHT_0  19
+
+#define TROUT_POWER_KEY     20
+
+#define TROUT_4_TP_LS_EN    19
+#define TROUT_5_TP_LS_EN    1
 
 #define TROUT_CPLD_BASE   0xE8100000
 #define TROUT_CPLD_START  0x98000000
 #define TROUT_CPLD_SIZE   SZ_4K
 
+#define TROUT_GPIO_CABLE_IN1		(83)
+#define TROUT_GPIO_CABLE_IN2		(49)
+
+#define TROUT_GPIO_START (128)
+
+#define TROUT_GPIO_INT_MASK0_REG            (0x0c)
+#define TROUT_GPIO_INT_STAT0_REG            (0x0e)
+#define TROUT_GPIO_INT_MASK1_REG            (0x14)
+#define TROUT_GPIO_INT_STAT1_REG            (0x10)
+
+#define TROUT_GPIO_HAPTIC_PWM               (28)
+#define TROUT_GPIO_PS_HOLD                  (25)
+
+#define TROUT_GPIO_MISC2_BASE               (TROUT_GPIO_START + 0x00)
+#define TROUT_GPIO_MISC3_BASE               (TROUT_GPIO_START + 0x08)
+#define TROUT_GPIO_MISC4_BASE               (TROUT_GPIO_START + 0x10)
+#define TROUT_GPIO_MISC5_BASE               (TROUT_GPIO_START + 0x18)
+#define TROUT_GPIO_INT2_BASE                (TROUT_GPIO_START + 0x20)
+#define TROUT_GPIO_MISC1_BASE               (TROUT_GPIO_START + 0x28)
+#define TROUT_GPIO_VIRTUAL_BASE             (TROUT_GPIO_START + 0x30)
+#define TROUT_GPIO_INT5_BASE                (TROUT_GPIO_START + 0x48)
+
+#define TROUT_GPIO_CHARGER_EN               (TROUT_GPIO_MISC2_BASE + 0)
+#define TROUT_GPIO_ISET                     (TROUT_GPIO_MISC2_BASE + 1)
+#define TROUT_GPIO_H2W_DAT_DIR              (TROUT_GPIO_MISC2_BASE + 2)
+#define TROUT_GPIO_H2W_CLK_DIR              (TROUT_GPIO_MISC2_BASE + 3)
+#define TROUT_GPIO_H2W_DAT_GPO              (TROUT_GPIO_MISC2_BASE + 4)
+#define TROUT_GPIO_H2W_CLK_GPO              (TROUT_GPIO_MISC2_BASE + 5)
+#define TROUT_GPIO_H2W_SEL0                 (TROUT_GPIO_MISC2_BASE + 6)
+#define TROUT_GPIO_H2W_SEL1                 (TROUT_GPIO_MISC2_BASE + 7)
+
+#define TROUT_GPIO_SPOTLIGHT_EN             (TROUT_GPIO_MISC3_BASE + 0)
+#define TROUT_GPIO_FLASH_EN                 (TROUT_GPIO_MISC3_BASE + 1)
+#define TROUT_GPIO_I2C_PULL                 (TROUT_GPIO_MISC3_BASE + 2)
+#define TROUT_GPIO_TP_I2C_PULL              (TROUT_GPIO_MISC3_BASE + 3)
+#define TROUT_GPIO_TP_EN                    (TROUT_GPIO_MISC3_BASE + 4)
+#define TROUT_GPIO_JOG_EN                   (TROUT_GPIO_MISC3_BASE + 5)
+#define TROUT_GPIO_UI_LED_EN                (TROUT_GPIO_MISC3_BASE + 6)
+#define TROUT_GPIO_QTKEY_LED_EN             (TROUT_GPIO_MISC3_BASE + 7)
+
+#define TROUT_GPIO_VCM_PWDN                 (TROUT_GPIO_MISC4_BASE + 0)
+#define TROUT_GPIO_USB_H2W_SW               (TROUT_GPIO_MISC4_BASE + 1)
+#define TROUT_GPIO_COMPASS_RST_N            (TROUT_GPIO_MISC4_BASE + 2)
+#define TROUT_GPIO_HAPTIC_EN_UP             (TROUT_GPIO_MISC4_BASE + 3)
+#define TROUT_GPIO_HAPTIC_EN_MAIN           (TROUT_GPIO_MISC4_BASE + 4)
+#define TROUT_GPIO_USB_PHY_RST_N            (TROUT_GPIO_MISC4_BASE + 5)
+#define TROUT_GPIO_WIFI_PA_RESETX           (TROUT_GPIO_MISC4_BASE + 6)
+#define TROUT_GPIO_WIFI_EN                  (TROUT_GPIO_MISC4_BASE + 7)
+
+#define TROUT_GPIO_BT_32K_EN                (TROUT_GPIO_MISC5_BASE + 0)
+#define TROUT_GPIO_MAC_32K_EN               (TROUT_GPIO_MISC5_BASE + 1)
+#define TROUT_GPIO_MDDI_32K_EN              (TROUT_GPIO_MISC5_BASE + 2)
+#define TROUT_GPIO_COMPASS_32K_EN           (TROUT_GPIO_MISC5_BASE + 3)
+
+#define TROUT_GPIO_NAVI_ACT_N               (TROUT_GPIO_INT2_BASE + 0)
+#define TROUT_GPIO_COMPASS_IRQ              (TROUT_GPIO_INT2_BASE + 1)
+#define TROUT_GPIO_SLIDING_DET              (TROUT_GPIO_INT2_BASE + 2)
+#define TROUT_GPIO_AUD_HSMIC_DET_N          (TROUT_GPIO_INT2_BASE + 3)
+#define TROUT_GPIO_SD_DOOR_N                (TROUT_GPIO_INT2_BASE + 4)
+#define TROUT_GPIO_CAM_BTN_STEP1_N          (TROUT_GPIO_INT2_BASE + 5)
+#define TROUT_GPIO_CAM_BTN_STEP2_N          (TROUT_GPIO_INT2_BASE + 6)
+#define TROUT_GPIO_TP_ATT_N                 (TROUT_GPIO_INT2_BASE + 7)
+#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE   (TROUT_GPIO_NAVI_ACT_N)
+#define TROUT_GPIO_BANK0_LAST_INT_SOURCE    (TROUT_GPIO_TP_ATT_N)
+
+#define TROUT_GPIO_H2W_DAT_GPI              (TROUT_GPIO_MISC1_BASE + 0)
+#define TROUT_GPIO_H2W_CLK_GPI              (TROUT_GPIO_MISC1_BASE + 1)
+#define TROUT_GPIO_CPLD128_VER_0            (TROUT_GPIO_MISC1_BASE + 4)
+#define TROUT_GPIO_CPLD128_VER_1            (TROUT_GPIO_MISC1_BASE + 5)
+#define TROUT_GPIO_CPLD128_VER_2            (TROUT_GPIO_MISC1_BASE + 6)
+#define TROUT_GPIO_CPLD128_VER_3            (TROUT_GPIO_MISC1_BASE + 7)
+
+#define TROUT_GPIO_SDMC_CD_N                (TROUT_GPIO_VIRTUAL_BASE + 0)
+#define TROUT_GPIO_END                      (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE   (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_LAST_INT_SOURCE    (TROUT_GPIO_SDMC_CD_N)
+
+#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
+	(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
+
+#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define TROUT_INT_BANK0_COUNT (8)
+#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_BANK1_COUNT (1)
+#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
+			TROUT_INT_BANK1_COUNT - 1)
+#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
+	(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+	(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
+#define TROUT_BANK_TO_MASK_REG(bank) \
+	(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
+#define TROUT_BANK_TO_STAT_REG(bank) \
+	(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
+
+#endif /* GUARD */
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index d029d1f5f9e..02cae5e2951 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/completion.h>
 #include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 262b441b437..83e47c0d5c2 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -16,6 +16,13 @@
 #ifndef __ASM_ARCH_MSM_GPIO_H
 #define __ASM_ARCH_MSM_GPIO_H
 
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
 /**
  * struct msm_gpio - GPIO pin description
  * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
deleted file mode 100644
index eb7660f5d4b..00000000000
--- a/arch/arm/mach-mx1/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_MX1
-
-comment "MX1 platforms:"
-
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select MACH_MXLADS
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
deleted file mode 100644
index fc2ddf82441..00000000000
--- a/arch/arm/mach-mx1/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-y			+= generic.o clock.o devices.o
-
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
deleted file mode 100644
index 8ed1492288a..00000000000
--- a/arch/arm/mach-mx1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	:= 0x08008000
-params_phys-y	:= 0x08000100
-initrd_phys-y	:= 0x08800000
-
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
deleted file mode 100644
index 22e866ff0c0..00000000000
--- a/arch/arm/mach-mx1/crm_regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
-
-/* CCM register addresses */
-#define CCM_CSCR	(CCM_BASE + 0x0)
-#define CCM_MPCTL0	(CCM_BASE + 0x4)
-#define CCM_MPCTL1	(CCM_BASE + 0x8)
-#define CCM_SPCTL0	(CCM_BASE + 0xC)
-#define CCM_SPCTL1	(CCM_BASE + 0x10)
-#define CCM_PCDR	(CCM_BASE + 0x20)
-
-#define CCM_CSCR_CLKO_OFFSET	29
-#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << 26)
-#define CCM_CSCR_SPLL_RESTART	(1 << 22)
-#define CCM_CSCR_MPLL_RESTART	(1 << 21)
-#define CCM_CSCR_OSC_EN_SHIFT	17
-#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xF << 10)
-#define CCM_CSCR_PRESC		(1 << 15)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		(1 << 0)
-
-#define CCM_PCDR_PCLK3_OFFSET	16
-#define CCM_PCDR_PCLK3_MASK	(0x7F << 16)
-#define CCM_PCDR_PCLK2_OFFSET	4
-#define CCM_PCDR_PCLK2_MASK	(0xF << 4)
-#define CCM_PCDR_PCLK1_OFFSET	0
-#define CCM_PCDR_PCLK1_MASK	0xF
-
-/* SCM register addresses */
-#define SCM_SIDR	(SCM_BASE + 0x0)
-#define SCM_FMCR	(SCM_BASE + 0x4)
-#define SCM_GPCR	(SCM_BASE + 0x8)
-#define SCM_GCCR	(SCM_BASE + 0xC)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
deleted file mode 100644
index b6be29d1cb0..00000000000
--- a/arch/arm/mach-mx1/devices.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-
-static struct resource imx_csi_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = CSI_INT,
-		.end    = CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx_csi_dmamask = 0xffffffffUL;
-
-struct platform_device imx_csi_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx_csi_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.resource       = imx_csi_resources,
-	.num_resources  = ARRAY_SIZE(imx_csi_resources),
-};
-
-static struct resource imx_i2c_resources[] = {
-	{
-		.start  = 0x00217000,
-		.end    = 0x00217010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = I2C_INT,
-		.end    = I2C_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_i2c_device = {
-	.name           = "imx-i2c",
-	.id             = 0,
-	.resource       = imx_i2c_resources,
-	.num_resources  = ARRAY_SIZE(imx_i2c_resources),
-};
-
-static struct resource imx_uart1_resources[] = {
-	{
-		.start	= UART1_BASE_ADDR,
-		.end	= UART1_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART1_MINT_RX,
-		.end	= UART1_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_TX,
-		.end	= UART1_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-	{
-		.start	= UART2_BASE_ADDR,
-		.end	= UART2_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART2_MINT_RX,
-		.end	= UART2_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_TX,
-		.end	= UART2_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = RTC_INT,
-		.end    = RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = RTC_SAMINT,
-		.end    = RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = WDT_INT,
-		.end    = WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= USBD_INT0,
-		.end	= USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT1,
-		.end	= USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT2,
-		.end	= USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT3,
-		.end	= USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT4,
-		.end	= USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT5,
-		.end	= USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT6,
-		.end	= USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
-		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init mxc_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
deleted file mode 100644
index 0da5d7cce3a..00000000000
--- a/arch/arm/mach-mx1/devices.h
+++ /dev/null
@@ -1,7 +0,0 @@
-extern struct platform_device imx_csi_device;
-extern struct platform_device imx_i2c_device;
-extern struct platform_device imx_uart1_device;
-extern struct platform_device imx_uart2_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835b225..00000000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-
-static struct resource uart0[] = {
-	{
-		.start = MX2x_UART1_BASE_ADDR,
-		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART1,
-		.end = MX2x_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX2x_UART2_BASE_ADDR,
-		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART2,
-		.end = MX2x_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MX2x_UART3_BASE_ADDR,
-		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART3,
-		.end = MX2x_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = MX2x_UART4_BASE_ADDR,
-		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART4,
-		.end = MX2x_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
-	{
-		.start = MX27_UART5_BASE_ADDR,
-		.end = MX27_UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART5,
-		.end = MX27_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-static struct resource uart5[] = {
-	{
-		.start = MX27_UART6_BASE_ADDR,
-		.end = MX27_UART6_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART6,
-		.end = MX27_INT_UART6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device5 = {
-	.name = "imx-uart",
-	.id = 5,
-	.resource = uart5,
-	.num_resources = ARRAY_SIZE(uart5),
-};
-#endif
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 54d217314ee..c71a7bc1928 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -4,5 +4,28 @@ comment "MX25 platforms:"
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+
+config MACH_EUKREA_CPUIMX25
+	bool "Support Eukrea CPUIMX25 Platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 10cebc5ced8..d9e46ce00a4 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,5 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 155014993b1..40c7cc41cee 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -109,6 +109,16 @@ static unsigned long get_rate_uart(struct clk *clk)
 	return get_rate_per(15);
 }
 
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_per(14);
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_per(13);
+}
+
 static unsigned long get_rate_i2c(struct clk *clk)
 {
 	return get_rate_per(6);
@@ -129,9 +139,17 @@ static unsigned long get_rate_lcdc(struct clk *clk)
 	return get_rate_per(7);
 }
 
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	return get_rate_per(0);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
-	return 48000000; /* FIXME */
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_upll();
+
+	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
 }
 
 static int clk_cgcr_enable(struct clk *clk)
@@ -166,14 +184,40 @@ static void clk_cgcr_disable(struct clk *clk)
 		.secondary	= s,			\
 	}
 
+/*
+ * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
+ * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
+ * taken from the Freescale released BSP.
+ *
+ * bit	reg	offset	clock
+ *
+ * 0	CGCR1	0	AUDMUX
+ * 12	CGCR1	12	ESAI
+ * 16	CGCR1	16	GPIO1
+ * 17	CGCR1	17	GPIO2
+ * 18	CGCR1	18	GPIO3
+ * 23	CGCR1	23	I2C1
+ * 24	CGCR1	24	I2C2
+ * 25	CGCR1	25	I2C3
+ * 27	CGCR1	27	IOMUXC
+ * 28	CGCR1	28	KPP
+ * 30	CGCR1	30	OWIRE
+ * 36	CGCR2	4	RTIC
+ * 51	CGCR2	19	WDOG
+ */
+
 DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
 DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
+DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -191,6 +235,13 @@ DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
+DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
+DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
+DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
+DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
+DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk,	 0, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -217,7 +268,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
 	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
 	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
@@ -225,6 +276,13 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -238,9 +296,13 @@ int __init mx25_clocks_init(void)
 	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
 
-	/* Clock source for lcdc is upll */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+	/* Clock source for lcdc and csi is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
+			CRM_BASE + 0x64);
 
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
new file mode 100644
index 00000000000..d86a7c3ca8b
--- /dev/null
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+#define imx25_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
+#define imx25_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
+
+#define imx25_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
+#define imx25_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
+#define imx25_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
+
+#define imx25_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
+#define imx25_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
+#define imx25_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
+#define imx25_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
+#define imx25_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+
+#define imx25_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
+
+#define imx25_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
+#define imx25_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
+#define imx25_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3a405fa400e..3468eb15b23 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -22,103 +22,6 @@
 #include <mach/mx25.h>
 #include <mach/irqs.h>
 
-static struct resource uart0[] = {
-	{
-		.start = 0x43f90000,
-		.end = 0x43f93fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 45,
-		.end = 45,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = 0x43f94000,
-		.end = 0x43f97fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 32,
-		.end = 32,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = 0x5000c000,
-		.end = 0x5000ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 18,
-		.end = 18,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = 0x50008000,
-		.end = 0x5000bfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 5,
-		.end = 5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = 0x5002c000,
-		.end = 0x5002ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 40,
-		.end = 40,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-#define MX25_OTG_BASE_ADDR 0x53FF4000
-
 static u64 otg_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_otg_resources[] = {
@@ -181,63 +84,6 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = 0x43fa4000,
-	       .end = 0x43fa7fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 14,
-	       .end = 14,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
-
-static struct resource mxc_spi_resources1[] = {
-	{
-	       .start = 0x50010000,
-	       .end = 0x50013fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 13,
-	       .end = 13,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
-
-static struct resource mxc_spi_resources2[] = {
-	{
-	       .start = 0x50004000,
-	       .end = 0x50007fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 0,
-	       .end = 0,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
-
 static struct resource mxc_pwm_resources0[] = {
 	{
 		.start	= 0x53fe0000,
@@ -333,63 +179,6 @@ struct platform_device mxc_pwm_device3 = {
 	.resource = mxc_pwm_resources3,
 };
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= 0x43f80000,
-		.end	= 0x43f83fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
-
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= 0x43f98000,
-		.end	= 0x43f9bfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 4,
-		.end	= 4,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
-
-static struct resource mxc_i2c_3_resources[] = {
-	{
-		.start	= 0x43f84000,
-		.end	= 0x43f87fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 10,
-		.end	= 10,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
-	.resource = mxc_i2c_3_resources,
-};
-
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
@@ -414,7 +203,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx25_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -439,26 +228,6 @@ struct platform_device mx25_fec_device = {
 	.resource	= mx25_fec_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MX25_NFC_BASE_ADDR,
-		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_NANDFC,
-		.end	= MX25_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name		= "mxc_nand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
-	.resource	= mxc_nand_resources,
-};
-
 static struct resource mx25_rtc_resources[] = {
 	{
 		.start	= MX25_DRYICE_BASE_ADDR,
@@ -515,3 +284,83 @@ struct platform_device mxc_wdt = {
 	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
 	.resource = mxc_wdt_resources,
 };
+
+static struct resource mx25_kpp_resources[] = {
+	{
+		.start	= MX25_KPP_BASE_ADDR,
+		.end	= MX25_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_KPP,
+		.end	= MX25_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_kpp_device = {
+	.name	= "imx-keypad",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(mx25_kpp_resources),
+	.resource	= mx25_kpp_resources,
+};
+
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= MX25_SSI1_BASE_ADDR,
+		.end	= MX25_SSI1_BASE_ADDR + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX25_INT_SSI1,
+		.end	= MX25_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= MX25_SSI2_BASE_ADDR,
+		.end	= MX25_SSI2_BASE_ADDR + 0x3fff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX25_INT_SSI2,
+		.end	= MX25_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
+static struct resource mx25_csi_resources[] = {
+	{
+		.start	= MX25_CSI_BASE_ADDR,
+		.end	= MX25_CSI_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_CSI,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_csi_device = {
+	.name	= "mx2-camera",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_csi_resources),
+	.resource	= mx25_csi_resources,
+	.dev		= {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index cee12c0a0be..4aceb68e35a 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -1,24 +1,16 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_otg;
 extern struct platform_device otg_udc_device;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device mxc_pwm_device0;
 extern struct platform_device mxc_pwm_device1;
 extern struct platform_device mxc_pwm_device2;
 extern struct platform_device mxc_pwm_device3;
 extern struct platform_device mxc_keypad_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
-extern struct platform_device mxc_nand_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mx25_kpp_device;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 00000000000..91931dcb068
--- /dev/null
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux-mx25.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mx25.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/ssi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+};
+
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+	{
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD5*/
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(4),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
+	);
+	mxc_audmux_v2_configure_port(4,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx25_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
new file mode 100644
index 00000000000..56b2e26d23b
--- /dev/null
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fec.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc eukrea_cpuimx25_pads[] = {
+	/* FEC - RMII */
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	/* I2C1 */
+	MX25_PAD_I2C1_CLK__I2C1_CLK,
+	MX25_PAD_I2C1_DAT__I2C1_DAT,
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+	.phy	= PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx25_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
+
+static void __init eukrea_cpuimx25_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
+			ARRAY_SIZE(eukrea_cpuimx25_pads)))
+		printk(KERN_ERR "error setting cpuimx25 pads !\n");
+
+	imx25_add_imx_uart0(&uart_pdata);
+	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+
+	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
+	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg, &otg_pdata);
+	}
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
+	eukrea_mbimxsd_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx25_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer eukrea_cpuimx25_timer = {
+	.init   = eukrea_cpuimx25_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+	/* Maintainer: Eukrea Electromatique */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = eukrea_cpuimx25_init,
+	.timer          = &eukrea_cpuimx25_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
index 83d74109e7d..62bc21f11a7 100644
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -16,6 +16,12 @@
  * Boston, MA  02110-1301, USA.
  */
 
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -24,6 +30,7 @@
 #include <linux/gpio.h>
 #include <linux/fec.h>
 #include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,14 +39,14 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
-#include "devices.h"
 #include <mach/iomux-mx25.h>
 
-static struct imxuart_platform_data uart_pdata = {
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -80,6 +87,16 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_LSCLK__LSCLK,
 	MX25_PAD_OE_ACD__OE_ACD,
 	MX25_PAD_CONTRAST__CONTRAST,
+
+	/* Keypad */
+	MX25_PAD_KPP_ROW0__KPP_ROW0,
+	MX25_PAD_KPP_ROW1__KPP_ROW1,
+	MX25_PAD_KPP_ROW2__KPP_ROW2,
+	MX25_PAD_KPP_ROW3__KPP_ROW3,
+	MX25_PAD_KPP_COL0__KPP_COL0,
+	MX25_PAD_KPP_COL1__KPP_COL1,
+	MX25_PAD_KPP_COL2__KPP_COL2,
+	MX25_PAD_KPP_COL3__KPP_COL3,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -103,7 +120,8 @@ static void __init mx25pdk_fec_reset(void)
 	gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
-static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 	.flash_bbt	= 1,
@@ -137,19 +155,45 @@ static struct imx_fb_platform_data mx25pdk_fb_pdata = {
 	.dmacr		= 0x00020010,
 };
 
+static const uint32_t mx25pdk_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HOME),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(1, 3, KEY_VOLUMEUP),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+	KEY(3, 0, KEY_F1),
+	KEY(3, 1, KEY_F2),
+	KEY(3, 2, KEY_F3),
+	KEY(3, 3, KEY_POWER),
+};
+
+static struct matrix_keymap_data mx25pdk_keymap_data = {
+	.keymap		= mx25pdk_keymap,
+	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 			ARRAY_SIZE(mx25pdk_pads));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx25_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
 	mxc_register_device(&mx25_rtc_device, NULL);
 	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
+	mxc_register_device(&mxc_wdt, NULL);
 
 	mx25pdk_fec_reset();
 	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
 }
 
 static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
index a7e587ff3e9..bb677111fb0 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-mx25/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -69,8 +65,11 @@ void __init mx25_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx25_register_gpios(void);
+
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+	imx25_register_gpios();
 }
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 344753fdf25..85beece802a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -15,6 +15,8 @@ comment "MX3 platforms:"
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
@@ -34,6 +36,9 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -42,6 +47,7 @@ config MACH_PCM037
 config MACH_PCM037_EET
 	bool "Support pcm037 EET board extensions"
 	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Add support for PCM037 EET baseboard extensions. If you are using the
 	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +57,9 @@ config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -58,6 +67,10 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -74,6 +87,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -82,6 +98,8 @@ config MACH_MX31MOBOARD
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +108,7 @@ config MACH_MX31LILLY
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -97,6 +116,10 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -105,6 +128,9 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +139,7 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific
@@ -121,8 +148,34 @@ config MACH_MX35_3DS
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5d650fda5d5..2bd7beceb99 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,5 +22,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
 obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 9f3e943e223..d3af0fdf847 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -359,7 +359,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -428,8 +428,8 @@ static struct clk nfc_clk = {
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "can", can1_clk)
-	_REGISTER_CLOCK(NULL, "can", can2_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
 	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK(NULL, "ect", ect_clk)
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 00000000000..3b1a44a2058
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+#define imx31_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
+#define imx31_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
+#define imx31_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+
+#define imx31_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
+#define imx31_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
+#define imx31_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
+#define imx31_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
+#define imx31_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+
+#define imx31_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
+#define imx31_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
+#define imx31_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 00000000000..f6a431a4c3d
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+#define imx35_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
+#define imx35_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+
+#define imx35_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
+#define imx35_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
+#define imx35_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+
+#define imx35_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
+#define imx35_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
+#define imx35_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+
+#define imx35_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
+#define imx35_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6e910..a4fd1a26fc9 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx3_camera.h>
 
 #include "devices.h"
 
-static struct resource uart0[] = {
-	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
-	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
@@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -167,82 +69,6 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= 0, /* runtime dependent */
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
-	{
-		.start = I2C_BASE_ADDR,
-		.end = I2C_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C,
-		.end = MXC_INT_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-	.resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
-	{
-		.start = I2C2_BASE_ADDR,
-		.end = I2C2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C2,
-		.end = MXC_INT_I2C2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-	.resource = mxc_i2c1_resources,
-};
-
-static struct resource mxc_i2c2_resources[] = {
-	{
-		.start = I2C3_BASE_ADDR,
-		.end = I2C3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C3,
-		.end = MXC_INT_I2C3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
-	.resource = mxc_i2c2_resources,
-};
-
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
@@ -455,68 +281,7 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-/*
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_1_resources[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_2_resources[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-	.resource = mxc_spi_0_resources,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-	.resource = mxc_spi_1_resources,
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-	.resource = mxc_spi_2_resources,
-};
-
-#ifdef CONFIG_ARCH_MX35
+#if defined(CONFIG_ARCH_MX35)
 static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
@@ -628,16 +393,15 @@ struct platform_device imx_kpp_device = {
 
 static int __init mx3_devices_init(void)
 {
+#if defined(CONFIG_ARCH_MX31)
 	if (cpu_is_mx31()) {
-		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
 		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
+#endif
+#if defined(CONFIG_ARCH_MX35)
 	if (cpu_is_mx35()) {
-		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -653,6 +417,7 @@ static int __init mx3_devices_init(void)
 		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c8646a29..e5535234839 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
@@ -20,9 +10,6 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 00000000000..1dc5004df86
--- /dev/null
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO_QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CMO_QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	/* Backlight */
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD_PWR */
+	MX35_PAD_D3_CLS__GPIO1_4,
+	/* LED */
+	MX35_PAD_LD23__GPIO3_29,
+	/* SWITCH */
+	MX35_PAD_LD19__GPIO3_25,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* I2S */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define GPIO_LED1	(2 * 32 + 29)
+#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LCDPWR	(4)
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx35 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD4 */
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(3),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
+	);
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx35_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec91af2..96aadcadb4f 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "crm_regs.h"
 
@@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 };
@@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = {
 };
 
 /* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&mxc_i2c_device1,
 	&armadillo5x0_button_device,
 };
 
@@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	/* SMSC9118 IRQ pin */
 	gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void)
 			    &armadillo5x0_nor_flash_pdata);
 
 	/* Register NAND Flash */
-	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
new file mode 100644
index 00000000000..63f970f340a
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx35_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+#define TSC2007_IRQGPIO		(2 * 32 + 2)
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(TSC2007_IRQGPIO);
+	gpio_request(TSC2007_IRQGPIO, NULL);
+	gpio_direction_input(TSC2007_IRQGPIO);
+
+	val = gpio_get_value(TSC2007_IRQGPIO);
+
+	gpio_free(TSC2007_IRQGPIO);
+	gpio_request(TSC2007_IRQGPIO, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(TSC2007_IRQGPIO, NULL);
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+	&imx_wdt_device0,
+};
+
+static struct pad_desc eukrea_cpuimx35_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* TSC2007 IRQ */
+	MX35_PAD_ATA_DA2__GPIO3_2,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx35_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx35_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
+			ARRAY_SIZE(eukrea_cpuimx35_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
+	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
+	eukrea_mbimxsd_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx35_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer eukrea_cpuimx35_timer = {
+	.init	= eukrea_cpuimx35_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+	/* Maintainer: Eukrea Electromatique */
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &eukrea_cpuimx35_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d1a6d..5b23e416d6c 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -37,13 +33,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/memory.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (					\
@@ -51,6 +46,23 @@
 	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
 	MX31_IO_ADDRESS(x))
 
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init kzm_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 }
 #else
 static inline void kzm_init_imx_uart(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 58e57291b79..6fe69e124d3 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -22,7 +18,6 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
@@ -37,19 +32,47 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
@@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi1_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
@@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -182,8 +206,10 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
 
 #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
 
-static void mx31_3ds_usbotg_init(void)
+static int mx31_3ds_usbotg_init(void)
 {
+	int err;
+
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
@@ -197,10 +223,25 @@ static void mx31_3ds_usbotg_init(void)
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
-	gpio_request(USBOTG_RST_B, "otgusb-reset");
-	gpio_direction_output(USBOTG_RST_B, 0);
+	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
+	if (err) {
+		pr_err("Failed to request the USB OTG reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBOTG_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB OTG reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
 	mdelay(1);
 	gpio_set_value(USBOTG_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBOTG_RST_B);
+	return err;
 }
 
 static struct fsl_usb2_platform_data usbotg_pdata = {
@@ -208,178 +249,16 @@ static struct fsl_usb2_platform_data usbotg_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
- * Support for the SMSC9217 on the Debug board.
- */
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= LAN9217_BASE_ADDR,
-		.end		= LAN9217_BASE_ADDR + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= EXPIO_INT_ENET,
-		.end		= EXPIO_INT_ENET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * Routines for the CPLD on the debug board. It contains a CPLD handling
- * LEDs, switches, interrupts for Ethernet.
- */
-
-static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
-{
-	uint32_t imr_val;
-	uint32_t int_valid;
-	uint32_t expio_irq;
-
-	imr_val = __raw_readw(CPLD_INT_MASK_REG);
-	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
- */
-static void expio_mask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* mask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg |= 1 << expio;
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
- */
-static void expio_ack_irq(uint32_t irq)
-{
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	/* mask the interrupt */
-	expio_mask_irq(irq);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
- */
-static void expio_unmask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* unmask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg &= ~(1 << expio);
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.ack = expio_ack_irq,
-	.mask = expio_mask_irq,
-	.unmask = expio_unmask_irq,
-};
-
-static int __init mx31_3ds_init_expio(void)
-{
-	int i;
-	int ret;
-
-	/* Check if there's a debug board connected */
-	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
-		/* No Debug board found */
-		return -ENODEV;
-	}
-
-	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
-		__raw_readw(CPLD_CODE_VER_REG));
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/* Disable the interrupts and clear the status */
-	__raw_writew(0, CPLD_INT_MASK_REG);
-	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	__raw_writew(0x1F, CPLD_INT_MASK_REG);
-	for (i = MXC_EXP_IO_BASE;
-	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		set_irq_chip(i, &expio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
-
-	return 0;
-}
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31_3ds_io_desc[] __initdata = {
-	{
-		.virtual = MX31_CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
-		.length = MX31_CS5_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-/*
  * Set up static virtual mappings.
  */
 static void __init mx31_3ds_map_io(void)
 {
 	mx31_map_io();
-	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
 }
 
 /*!
@@ -390,10 +269,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
@@ -402,8 +281,9 @@ static void __init mxc_board_init(void)
 	mx31_3ds_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
 
-	if (!mx31_3ds_init_expio())
-		platform_device_register(&smsc911x_device);
+	if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
 }
 
 static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a1895c2..94b3e7c4240 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -33,8 +29,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,45 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +123,7 @@ static inline int mxc_init_extuart(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -112,7 +137,7 @@ static unsigned int uart_pins[] = {
 static inline void mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -475,7 +500,7 @@ static void mxc_init_i2c(void)
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
 
-	mxc_register_device(&mxc_i2c_device1, NULL);
+	imx31_add_imx_i2c1(NULL);
 }
 #else
 static void mxc_init_i2c(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index d3d5877c750..8f66f65e80e 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -46,10 +42,10 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -115,6 +111,8 @@ static struct platform_device physmap_flash_device = {
 
 /* USB */
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -244,10 +242,20 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
+static void lilly1131_usb_init(void)
+{
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
 
 /* SPI */
 
@@ -257,12 +265,12 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -277,6 +285,12 @@ static struct spi_board_info mc13783_dev __initdata = {
 	.bus_num	= 1,
 	.chip_select	= 0,
 	.platform_data	= &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
 };
 
 static int mx31lilly_baseboard;
@@ -314,20 +328,14 @@ static void __init mx31lilly_board_init(void)
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	lilly1131_usb_init();
 }
 
 static void __init mx31lilly_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d1140087..da236c497d2 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -42,14 +38,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = {
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -253,9 +248,9 @@ static void __init mxc_board_init(void)
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
-	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
 #if defined(CONFIG_USB_ULPI)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 62b5e40165d..67776bc61c3 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -42,16 +38,15 @@
 #include <mach/board-mx31moboard.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = {
 
 static int moboard_uart0_init(struct platform_device *pdev)
 {
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	return 0;
+	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	if (ret)
+		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+	return ret;
+}
+
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
 }
 
-static struct imxuart_platform_data uart0_pdata = {
+static const struct imxuart_platform_data uart0_pdata __initconst = {
 	.init = moboard_uart0_init,
+	.exit = moboard_uart0_exit,
 };
 
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
 	.bitrate = 400000,
 };
 
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 	.chipselect	= moboard_spi1_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
 };
@@ -286,7 +293,7 @@ static int moboard_spi2_cs[] = {
 	MXC_SPI_CS(1),
 };
 
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
 	.chipselect	= moboard_spi2_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
 };
@@ -499,15 +506,14 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-
-	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+	imx31_add_imx_uart0(&uart0_pdata);
+	imx31_add_imx_uart4(&uart4_pdata);
 
-	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
-	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+	imx31_add_imx_i2c0(&moboard_i2c0_data);
+	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
-	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+	imx31_add_spi_imx1(&moboard_spi1_pdata);
+	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d4dca..1c30d7212f1 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -12,10 +12,12 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
  */
 
 #include <linux/types.h>
@@ -32,12 +34,12 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -90,7 +92,7 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx35_add_imx_uart0(&uart_pdata);
 
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index cce41066238..8a292dd1a71 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -43,20 +39,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "pcm037.h"
 
@@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = {
 	.resource = &pcm038_sram_resource,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
 	.bitrate = 20000,
 };
 
@@ -545,6 +539,7 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -554,6 +549,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -581,7 +577,6 @@ __setup("otg_mode=", pcm037_otg_mode);
 static void __init mxc_board_init(void)
 {
 	int ret;
-	u32 tmp;
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
@@ -614,9 +609,10 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
@@ -634,10 +630,10 @@ static void __init mxc_board_init(void)
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+	imx31_add_imx_i2c1(&pcm037_i2c1_data);
+	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc4..c8b98218efe 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,9 +13,6 @@
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
 #include <mach/iomux-mx3.h>
 
 #include <asm/mach-types.h>
@@ -64,7 +61,7 @@ static struct spi_board_info pcm037_spi_dev[] = {
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
@@ -184,7 +181,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+	imx35_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 78d9185a9d4..47f5311b301 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -40,19 +36,15 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +114,12 @@ static struct platform_device pcm043_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
 
@@ -222,6 +214,9 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
 };
 
 #define AC97_GPIO_TXFS	(1 * 32 + 31)
@@ -304,11 +299,13 @@ static struct imx_ssi_platform_data pcm043_ssi_pdata = {
 	.flags = IMX_SSI_USE_AC97,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -319,6 +316,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -361,17 +359,17 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx35_add_imx_uart1(&uart_pdata);
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 #endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -390,6 +388,7 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
+	imx35_add_flexcan1(NULL);
 }
 
 static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b8323a1..d44ac70222a 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -34,9 +30,9 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
 /* FPGA defines */
@@ -62,7 +58,7 @@
  * This file contains the board-specific initialization routines.
  */
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -73,11 +69,11 @@ static int uart_pins[] = {
 	MX31_PIN_RXD1__RXD1
 };
 
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
 			"uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 
 static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = {
 
 static struct resource qong_flash_resource = {
 	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f9806..20e48c0195c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -97,9 +93,12 @@ void __init mx35_map_io(void)
 }
 #endif
 
+int imx3x_register_gpios(void);
+
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	imx3x_register_gpios();
 }
 
 void __init mx35_init_irq(void)
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74a12e..827fd3c8020 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -36,13 +32,13 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void)
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfbec38..7b0e74e275b 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -37,12 +33,11 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
-#include <mach/spi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -201,9 +196,9 @@ void __init mx31lite_db_init(void)
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	mxc_register_device(&imx_wdt_device0, NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299cb2c0..fc395a7a859 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -27,13 +23,13 @@
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void)
 	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
 		"devboard");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c27e6..0551eb39d97 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6d9d9..40c3e7564cb 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -30,7 +26,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
 #include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -183,8 +179,7 @@ void __init mx31moboard_smartbot_init(int board)
 	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
 		"smartbot");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
+	imx31_add_imx_uart1(&uart_pdata);
 
 	switch (board) {
 	case MX31SMARTBOT:
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 1576d51e676..0848db5dd36 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -15,4 +15,31 @@ config MACH_MX51_BABBAGE
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index bf23f869ef5..86c66e7f52f 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,4 +6,6 @@
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-
+obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
new file mode 100644
index 00000000000..623607a20f5
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define CPUIMX51_USBH1_STP	(0*32 + 27)
+#define CPUIMX51_QUARTA_GPIO	(2*32 + 28)
+#define CPUIMX51_QUARTB_GPIO	(2*32 + 25)
+#define CPUIMX51_QUARTC_GPIO	(2*32 + 26)
+#define CPUIMX51_QUARTD_GPIO	(2*32 + 27)
+#define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
+#define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
+#define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
+#define CPUIMX51_QUARTD_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
+#define CPUIMX51_QUART_XTAL	14745600
+#define CPUIMX51_QUART_REGSHIFT	17
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
+		.irq = CPUIMX51_QUARTA_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
+		.irq = CPUIMX51_QUARTB_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
+		.irq = CPUIMX51_QUARTC_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
+		.irq = CPUIMX51_QUARTD_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	&serial_device,
+#endif
+};
+
+static struct pad_desc eukrea_cpuimx51_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* I2C2 */
+	MX51_PAD_GPIO_1_2__I2C2_SCL,
+	MX51_PAD_GPIO_1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* QUART IRQ */
+	MX51_PAD_NANDF_D15__GPIO_3_25,
+	MX51_PAD_NANDF_D14__GPIO_3_26,
+	MX51_PAD_NANDF_D13__GPIO_3_27,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx51_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
+					ARRAY_SIZE(eukrea_cpuimx51_pads));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
+	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
+	gpio_free(CPUIMX51_QUARTA_GPIO);
+	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
+	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
+	gpio_free(CPUIMX51_QUARTB_GPIO);
+	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
+	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
+	gpio_free(CPUIMX51_QUARTC_GPIO);
+	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
+	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
+	gpio_free(CPUIMX51_QUARTD_GPIO);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
+	eukrea_mbimx51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
new file mode 100644
index 00000000000..f95c2fd9466
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx51.h>
+#include <mach/imx-uart.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+
+static struct pad_desc mx51_3ds_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	MX51_PAD_EIM_D25__UART2_CTS,
+	MX51_PAD_EIM_D26__UART2_RTS,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_EIM_D24__UART3_CTS,
+	MX51_PAD_EIM_D27__UART3_RTS,
+
+	/* CPLD PARENT IRQ PIN */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+	MX51_PAD_KEY_COL4__KEY_COL4,
+	MX51_PAD_KEY_COL5__KEY_COL5,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
+static int mx51_3ds_board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F1),
+	KEY(0, 4, KEY_UP),
+	KEY(0, 5, KEY_F2),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+	KEY(1, 4, KEY_SELECT),
+	KEY(1, 5, KEY_RIGHT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_F3),
+	KEY(2, 4, KEY_DOWN),
+	KEY(2, 5, KEY_F4),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_OK),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+	KEY(3, 4, KEY_MENU),
+	KEY(3, 5, KEY_BACK)
+};
+
+static struct matrix_keymap_data mx51_3ds_map_data = {
+	.keymap		= mx51_3ds_board_keymap,
+	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
+};
+
+static void mxc_init_keypad(void)
+{
+	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+}
+#else
+static inline void mxc_init_keypad(void)
+{
+}
+#endif
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
+					ARRAY_SIZE(mx51_3ds_pads));
+	mxc_init_imx_uart();
+
+	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
+
+	mxc_init_keypad();
+}
+
+static void __init mx51_3ds_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_3ds_timer_init,
+};
+
+MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index ed885f9d7b7..6e384d92e62 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -21,6 +22,7 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
 #include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
@@ -64,6 +66,18 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_EIM_D27__UART3_RTS,
 	MX51_PAD_EIM_D24__UART3_CTS,
 
+	/* I2C1 */
+	MX51_PAD_EIM_D16__I2C1_SDA,
+	MX51_PAD_EIM_D19__I2C1_SCL,
+
+	/* I2C2 */
+	MX51_PAD_KEY_COL4__I2C2_SCL,
+	MX51_PAD_KEY_COL5__I2C2_SDA,
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__HSI2C_CLK,
+	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
 	MX51_PAD_USBH1_DIR__USBH1_DIR,
@@ -78,7 +92,7 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO1_7,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
 };
 
 /* Serial ports */
@@ -99,6 +113,14 @@ static inline void mxc_init_imx_uart(void)
 }
 #endif /* SERIAL_IMX */
 
+static struct imxi2c_platform_data babbage_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct imxi2c_platform_data babbage_hsi2c_data = {
+	.bitrate = 400000,
+};
+
 static int gpio_usbh1_active(void)
 {
 	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
@@ -230,6 +252,10 @@ static void __init mxc_board_init(void)
 	mxc_init_imx_uart();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+
 	if (otg_mode_host)
 		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
 	else {
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index d9f612d3370..6af69def357 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -758,6 +758,10 @@ static struct clk gpt_32k_clk = {
 	.parent = &ckil_clk,
 };
 
+static struct clk kpp_clk = {
+	.id = 0,
+};
+
 #define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
@@ -798,6 +802,14 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
+/* I2C */
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
@@ -815,12 +827,16 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 7130449aacd..1920ff4963b 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -93,6 +93,64 @@ struct platform_device mxc_fec_device = {
 	.resource = mxc_fec_resources,
 };
 
+static struct resource mxc_i2c0_resources[] = {
+	{
+		.start = MX51_I2C1_BASE_ADDR,
+		.end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C1,
+		.end = MX51_MXC_INT_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+	.resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+	{
+		.start = MX51_I2C2_BASE_ADDR,
+		.end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C2,
+		.end = MX51_MXC_INT_I2C2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+	.resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_hsi2c_resources[] = {
+	{
+		.start = MX51_HSI2C_DMA_BASE_ADDR,
+		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_HS_I2C,
+		.end = MX51_MXC_INT_HS_I2C,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_hsi2c_device = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
+	.resource = mxc_hsi2c_resources
+};
+
 static u64 usb_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource usbotg_resources[] = {
@@ -168,34 +226,57 @@ struct platform_device mxc_wdt = {
 	.resource = mxc_wdt_resources,
 };
 
+static struct resource mxc_kpp_resources[] = {
+	{
+		.start = MX51_MXC_INT_KPP,
+		.end = MX51_MXC_INT_KPP,
+		.flags = IORESOURCE_IRQ,
+	} , {
+		.start = MX51_KPP_BASE_ADDR,
+		.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "imx-keypad",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_kpp_resources),
+	.resource = mxc_kpp_resources,
+};
+
 static struct mxc_gpio_port mxc_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
 		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START
 	},
 	{
 		.chip.label = "gpio-1",
 		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
 	},
 	{
 		.chip.label = "gpio-2",
 		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
 	},
 	{
 		.chip.label = "gpio-3",
 		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index c879ae71cd5..e509cfaad1d 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -6,3 +6,7 @@ extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_hsi2c_device;
+extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
new file mode 100644
index 00000000000..ffa93d1d6ef
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -0,0 +1,200 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/leds.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+#define MBIMX51_TSC2007_GPIO	(2*32 + 30)
+#define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
+#define MBIMX51_LED0		(2*32 + 5)
+#define MBIMX51_LED1		(2*32 + 6)
+#define MBIMX51_LED2		(2*32 + 7)
+#define MBIMX51_LED3		(2*32 + 8)
+
+static struct gpio_led mbimx51_leds[] = {
+	{
+		.name			= "led0",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED0,
+	},
+	{
+		.name			= "led1",
+		.default_trigger	= "nand-disk",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED1,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED2,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "default-on",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED3,
+	},
+};
+
+static struct gpio_led_platform_data mbimx51_leds_info = {
+	.leds		= mbimx51_leds,
+	.num_leds	= ARRAY_SIZE(mbimx51_leds),
+};
+
+static struct platform_device mbimx51_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mbimx51_leds_info,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mbimx51_leds_gpio,
+};
+
+static struct pad_desc mbimx51_pads[] = {
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+
+	/* TSC2007 IRQ */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* LEDS */
+	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mbimx51_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_UP),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_RIGHT),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+};
+
+static struct matrix_keymap_data mbimx51_map_data = {
+	.keymap		= mbimx51_keymap,
+	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
+};
+
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
+}
+
+struct tsc2007_platform_data tsc2007_data = {
+	.model = 2007,
+	.x_plate_ohms = 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
+};
+
+static struct i2c_board_info mbimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.irq  = MBIMX51_TSC2007_IRQ,
+		.platform_data = &tsc2007_data,
+	},
+};
+
+/*
+ * baseboard initialization.
+ */
+void __init eukrea_mbimx51_baseboard_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
+					ARRAY_SIZE(mbimx51_pads));
+
+	mxc_register_device(&mxc_uart_device1, NULL);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+	gpio_request(MBIMX51_LED0, "LED0");
+	gpio_direction_output(MBIMX51_LED0, 1);
+	gpio_free(MBIMX51_LED0);
+	gpio_request(MBIMX51_LED1, "LED1");
+	gpio_direction_output(MBIMX51_LED1, 1);
+	gpio_free(MBIMX51_LED1);
+	gpio_request(MBIMX51_LED2, "LED2");
+	gpio_direction_output(MBIMX51_LED2, 1);
+	gpio_free(MBIMX51_LED2);
+	gpio_request(MBIMX51_LED3, "LED3");
+	gpio_direction_output(MBIMX51_LED3, 1);
+	gpio_free(MBIMX51_LED3);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+
+	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
+	gpio_direction_input(MBIMX51_TSC2007_GPIO);
+	set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+	i2c_register_board_info(1, mbimx51_i2c_devices,
+				ARRAY_SIZE(mbimx51_i2c_devices));
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef80cc..bc3f30db8d9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@ void __init mx51_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx51_register_gpios(void);
+
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -80,4 +82,5 @@ void __init mx51_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
+	imx51_register_gpios();
 }
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
index ce4f5905818..b989baccd67 100644
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -11,11 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
index 353bd977b39..027af4f0d18 100644
--- a/arch/arm/mach-mxc91231/devices.c
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -135,7 +135,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init mxc91231_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 6becda3ff33..aeccfd755fe 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -15,11 +15,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/mm.h>
@@ -88,7 +83,10 @@ void __init mxc91231_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int mxc91231_register_gpios(void);
+
 void __init mxc91231_init_irq(void)
 {
+	mxc91231_register_gpios();
 	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 2c471fc451d..89f793adf77 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,7 +32,10 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+	.rate = 2400000,
+};
+
 static struct clk clk_48 = {
 	.rate = 48 * 1000 * 1000,
 };
@@ -50,6 +53,12 @@ static struct clk clk_default;
 	}
 
 static struct clk_lookup lookups[] = {
+	{
+		.con_id		= "apb_pclk",
+		.clk		= &clk_default,
+	},
+	CLK(&clk_24, "mtu0"),
+	CLK(&clk_24, "mtu1"),
 	CLK(&clk_48, "uart0"),
 	CLK(&clk_48, "uart1"),
 	CLK(&clk_default, "gpio.0"),
@@ -59,10 +68,8 @@ static struct clk_lookup lookups[] = {
 	CLK(&clk_default, "rng"),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 5563985a2cc..78da2e7c398 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,3 +11,5 @@
 struct clk {
 	unsigned long		rate;
 };
+
+int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 91c3c901b46..ac58e3b03b1 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -31,6 +31,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "clock.h"
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -143,6 +145,12 @@ void __init cpu8815_init_irq(void)
 	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 /*
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 0859336a8e6..5c934bdb715 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 1b12d324b08..770a68c46e8 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -20,50 +20,49 @@ static void putc_dummy(char c, void __iomem *base)
 	/* nothing */
 }
 
+static int timeout;
+
 static void putc_ns9360(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@ static void putc_ns921x(char c, void __iomem *base)
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
+	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fdd1dd53fa9..0a9d61d2d22 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -301,6 +301,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= ams_delta_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed102c..059bac60b35 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -378,6 +378,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e1195a3467b..7a65684d2a1 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -98,6 +98,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d1100e4f65a..68b2beda8b9 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -467,6 +467,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index a53ab8297d2..0b0825fe675 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -437,6 +437,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 8e313b4b99a..d70a4f0923f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -304,6 +304,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
+	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 5d12fd35681..91064b37859 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -463,6 +463,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 71e1a3fad0e..8c28b10f3da 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -400,6 +400,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_nokia770_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 80d862001de..e2a72af3089 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -584,6 +584,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= osk_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 569b4c9085c..61a2321b973 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -373,6 +373,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmte_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 6ad49a2cc1a..21c01c6afcc 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,6 +321,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmtt_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 6641de9257e..f3249245153 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -338,10 +338,12 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.phys_io = 0xfff00000,
-	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
-	.boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
-	.init_irq = omap_palmz71_init_irq,
-	.init_machine = omap_palmz71_init,
-	.timer = &omap_timer,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmz71_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_palmz71_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d5741c8..8b5ab1fcc40 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -339,6 +339,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2fb1e5f8e2e..995566b862b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -423,7 +423,8 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_sx1_map_io,
-	.init_irq		= omap_sx1_init_irq,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 87b9436fe7c..4c483dc1de5 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -287,6 +287,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= voiceblue_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d9b8d82530a..0ce3fec2d25 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,7 +22,6 @@
 
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
-extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -122,7 +121,6 @@ void __init omap1_map_common_io(void)
 #endif
 
 	omap_sram_init();
-	omapfb_reserve_sdram();
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a11a575745e..42f49f785c9 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -248,6 +248,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_2430sdp_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index f474a80b886..dd9c03171a1 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -815,6 +815,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 504d2bd222f..57290fb3fcd 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -108,6 +108,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e4a5d66b83b..4bb2c5d151e 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -402,6 +402,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_4430sdp_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index af383a87694..7da92defcde 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -472,6 +472,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= am3517_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index aa69fb99974..bd75642aee6 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -346,6 +346,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_apollon_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2cc86c..bc4c3f80706 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -837,6 +837,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= cm_t35_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b58881..922b7464807 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -825,6 +825,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= devkit8000_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 16cc0686067..9242902d3a4 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -59,6 +59,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0665f2c8dc8..16703fdb351 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -378,6 +378,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d55c57b761a..759e39d1a70 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -543,6 +543,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= igep2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index fefd7e6e977..9cd2669113e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -417,6 +417,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3ccc34ebdcc..2565ff08a22 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -667,6 +667,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -677,6 +678,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -687,6 +689,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 69b154cdc75..0ab0c26db4d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -519,6 +519,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9526101381..a3d2e285e11 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -727,6 +727,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index db06dc910ba..c0f4f12eba5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -601,6 +601,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f848ba8dbc1..a04cffd691c 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -538,9 +538,7 @@ static void ads7846_dev_init(void)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2f5f8233dd5..f05b867c585 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -571,6 +571,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_touchbook_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac41400c2..87acb2f198e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -495,6 +495,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321c2d4..03483920ed6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void)
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -182,6 +186,7 @@ static int board_keymap[] = {
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -190,6 +195,7 @@ static int board_keymap[] = {
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -197,6 +203,8 @@ static int board_keymap[] = {
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -205,20 +213,23 @@ static int board_keymap[] = {
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1b86b5bb87a..3bd956f9e19 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -154,6 +154,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= rx51_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 803ef14cbf2..ffe188cb18e 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -95,6 +95,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 33147042485..5b605eba3e7 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -77,6 +77,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 41b155acfca..d33744117ce 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3166,6 +3166,10 @@ static struct clk uart4_ick_am35xx = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.ops		= &clkops_null,
+};
 
 /*
  * clkdev
@@ -3173,6 +3177,7 @@ static struct clk uart4_ick_am35xx = {
 
 /* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
+	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
 	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
 	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 02804224517..e10db7a90cb 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1369,6 +1369,7 @@ static struct clk emif1_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1379,6 +1380,7 @@ static struct clk emif2_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3cfb425ea67..4e1f53d0b88 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/vram.h>
 
 #include "clock2xxx.h"
 #include "clock3xxx.h"
@@ -241,8 +240,6 @@ static void __init _omap2_map_common_io(void)
 
 	omap2_check_revision();
 	omap_sram_init();
-	omapfb_reserve_sdram();
-	omap_vram_reserve_sdram();
 }
 
 #ifdef CONFIG_ARCH_OMAP2420
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 95c9a5f774e..b7a4133267d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -409,10 +409,11 @@ static int _init_main_clk(struct omap_hwmod *oh)
 		return 0;
 
 	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk)
+	if (!oh->_clk) {
 		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			   oh->name, oh->main_clk);
 		return -EINVAL;
+	}
 
 	if (!oh->_clk->clkdm)
 		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
@@ -444,10 +445,11 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			continue;
 
 		c = omap_clk_get_by_name(os->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -470,10 +472,11 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = omap_clk_get_by_name(oc->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2e967716cc3..b88737fd6cf 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void)
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
 			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
@@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void)
 				return;
 			}
 			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKST);
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index c68f799e83c..d72d1ac3033 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 905719a677a..c897e03e413 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -26,6 +26,7 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
+	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index fe0de1698ed..a47100d46a4 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -3,6 +3,10 @@
  *
  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
+ * Support for HW Rev C1:
+ *
+ * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU Lesser General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -23,6 +27,8 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -31,6 +37,7 @@
 #include "common.h"
 #include "mpp.h"
 
+/* Rev A1 and B1 */
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
@@ -42,6 +49,23 @@
 #define DNS323_GPIO_KEY_POWER		9
 #define DNS323_GPIO_KEY_RESET		10
 
+/* Rev C1 */
+#define DNS323C_GPIO_KEY_POWER		1
+#define DNS323C_GPIO_POWER_OFF		2
+#define DNS323C_GPIO_LED_RIGHT_AMBER	8
+#define DNS323C_GPIO_LED_LEFT_AMBER	9
+#define DNS323C_GPIO_LED_POWER		17
+#define DNS323C_GPIO_FAN_BIT1		18
+#define DNS323C_GPIO_FAN_BIT0		19
+
+/* Exposed to userspace, do not change */
+enum {
+	DNS323_REV_A1,	/* 0 */
+	DNS323_REV_B1,	/* 1 */
+	DNS323_REV_C1,	/* 2 */
+};
+
+
 /****************************************************************************
  * PCI setup
  */
@@ -68,21 +92,12 @@ static struct hw_pci dns323_pci __initdata = {
 	.map_irq	= dns323_pci_map_irq,
 };
 
-static int __init dns323_dev_id(void)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-
-	return dev;
-}
-
 static int __init dns323_pci_init(void)
 {
-	/* The 5182 doesn't really use its PCI bus, and initialising PCI
+	/* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
 	 * gets in the way of initialising the SATA controller.
 	 */
-	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
+	if (machine_is_dns323() && system_rev == DNS323_REV_A1)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -221,7 +236,7 @@ static int __init dns323_read_mac_addr(void)
 	}
 
 	iounmap(mac_page);
-	printk("DNS323: Found ethernet MAC address: ");
+	printk("DNS-323: Found ethernet MAC address: ");
 	for (i = 0; i < 6; i++)
 		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
 
@@ -259,12 +274,11 @@ static int dns323_gpio_blink_set(unsigned gpio, int state,
 	return 0;
 }
 
-static struct gpio_led dns323_leds[] = {
+static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
-		.default_trigger = "timer",
-		.active_low = 1,
+		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -276,9 +290,34 @@ static struct gpio_led dns323_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data dns323_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323_leds),
-	.leds		= dns323_leds,
+
+static struct gpio_led dns323c_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = DNS323C_GPIO_LED_POWER,
+		.default_trigger = "timer",
+		.active_low = 1,
+	}, {
+		.name = "right:amber",
+		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
+		.active_low = 1,
+	}, {
+		.name = "left:amber",
+		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
+		.active_low = 1,
+	},
+};
+
+
+static struct gpio_led_platform_data dns323ab_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323ab_leds),
+	.leds		= dns323ab_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
+};
+
+static struct gpio_led_platform_data dns323c_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323c_leds),
+	.leds		= dns323c_leds,
 	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
@@ -286,7 +325,7 @@ static struct platform_device dns323_gpio_leds = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &dns323_led_data,
+		.platform_data	= &dns323ab_led_data,
 	},
 };
 
@@ -294,7 +333,7 @@ static struct platform_device dns323_gpio_leds = {
  * GPIO Attached Keys
  */
 
-static struct gpio_keys_button dns323_buttons[] = {
+static struct gpio_keys_button dns323ab_buttons[] = {
 	{
 		.code		= KEY_RESTART,
 		.gpio		= DNS323_GPIO_KEY_RESET,
@@ -308,9 +347,23 @@ static struct gpio_keys_button dns323_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data dns323_button_data = {
-	.buttons	= dns323_buttons,
-	.nbuttons	= ARRAY_SIZE(dns323_buttons),
+static struct gpio_keys_platform_data dns323ab_button_data = {
+	.buttons	= dns323ab_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323ab_buttons),
+};
+
+static struct gpio_keys_button dns323c_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= DNS323C_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dns323c_button_data = {
+	.buttons	= dns323c_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323c_buttons),
 };
 
 static struct platform_device dns323_button_device = {
@@ -318,7 +371,7 @@ static struct platform_device dns323_button_device = {
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
-		.platform_data	= &dns323_button_data,
+		.platform_data	= &dns323ab_button_data,
 	},
 };
 
@@ -332,7 +385,7 @@ static struct mv_sata_platform_data dns323_sata_data = {
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -356,7 +409,7 @@ static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
-static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -380,15 +433,57 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* ? input */
+	{  1, MPP_GPIO },		/* input power switch (0 = pressed) */
+	{  2, MPP_GPIO },		/* output power off */
+	{  3, MPP_UNUSED },		/* ? output */
+	{  4, MPP_UNUSED },		/* ? output */
+	{  5, MPP_UNUSED },		/* ? output */
+	{  6, MPP_UNUSED },		/* ? output */
+	{  7, MPP_UNUSED },		/* ? output */
+	{  8, MPP_GPIO },		/* i/o right amber LED */
+	{  9, MPP_GPIO },		/* i/o left amber LED */
+	{ 10, MPP_GPIO },		/* input */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO },		/* power button LED */
+	{ 18, MPP_GPIO },		/* fan speed bit 0 */
+	{ 19, MPP_GPIO },		/* fan speed bit 1 */
+	{ -1 },
+};
+
+/* Rev C1 Fan speed notes:
+ *
+ * The fan is controlled by 2 GPIOs on this board. The settings
+ * of the bits is as follow:
+ *
+ *  GPIO 18    GPIO 19    Fan
+ *
+ *    0          0        stopped
+ *    0          1        low speed
+ *    1          0        high speed
+ *    1          1        don't do that (*)
+ *
+ * (*) I think the two bits control two feed-in resistors into a fixed
+ *     PWN circuit, setting both bits will basically go a 'bit' faster
+ *     than high speed, but d-link doesn't do it and you may get out of
+ *     HW spec so don't do it.
+ */
+
 /*
- * On the DNS-323 the following devices are attached via I2C:
+ * On the DNS-323 A1 and B1 the following devices are attached via I2C:
  *
  *  i2c addr | chip        | description
  *  0x3e     | GMT G760Af  | fan speed PWM controller
  *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
  *  0x68     | ST M41T80   | RTC w/ alarm
  */
-static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
 	}, {
@@ -398,36 +493,140 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
+/*
+ * On the DNS-323 C1 the following devices are attached via I2C:
+ *
+ *  i2c addr | chip        | description
+ *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ *  0x68     | ST M41T80   | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41t80", 0x68),
+	},
+};
+
 /* DNS-323 rev. A specific power off method */
 static void dns323a_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
 /* DNS-323 rev B specific power off method */
 static void dns323b_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 	mdelay(100);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
 }
 
+/* DNS-323 rev. C specific power off method */
+static void dns323c_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
+}
+
+static int dns323c_phy_fixup(struct phy_device *phy)
+{
+	phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
+
+	return 0;
+}
+
+static int __init dns323_identify_rev(void)
+{
+	u32 dev, rev, i, reg;
+
+	pr_debug("DNS-323: Identifying board ... \n");
+
+	/* Rev A1 has a 5181 */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5181_DEV_ID) {
+		pr_debug("DNS-323: 5181 found, board is A1\n");
+		return DNS323_REV_A1;
+	}
+	pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
+
+	/* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
+	 * a bit gross but we want to do that without links into the eth
+	 * driver so let's poke at it directly. We default to rev B1 in
+	 * case the accesses fail
+	 */
+
+#define ETH_SMI_REG		(ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
+#define  SMI_BUSY		0x10000000
+#define  SMI_READ_VALID		0x08000000
+#define  SMI_OPCODE_READ	0x04000000
+#define  SMI_OPCODE_WRITE	0x00000000
+
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (!(reg & SMI_BUSY))
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	writel((3 << 21)	/* phy ID reg */ |
+	       (8 << 16)	/* phy addr */ |
+	       SMI_OPCODE_READ, ETH_SMI_REG);
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (reg & SMI_READ_VALID)
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
+
+	/* Note: the Marvell tools mask the ID with 0x3f0 before comparison
+	 * but I don't see that making a difference here, at least with
+	 * any known Marvell PHY ID
+	 */
+	switch(reg & 0xfff0) {
+	case 0x0cc0: /* MV88E1111 */
+		return DNS323_REV_B1;
+	case 0x0e10: /* MV88E1118 */
+		return DNS323_REV_C1;
+	default:
+		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+			   reg & 0xffff);
+	}
+	return DNS323_REV_B1;
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
+	/* Identify revision */
+	system_rev = dns323_identify_rev();
+	pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
+
 	/* Just to be tricky, the 5182 has a completely different
 	 * set of MPP modes to the 5181.
 	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
-	else {
-		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		orion5x_mpp_conf(dns323a_mpp_modes);
 		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+		break;
+	case DNS323_REV_B1:
+		orion5x_mpp_conf(dns323b_mpp_modes);
+		break;
+	case DNS323_REV_C1:
+		orion5x_mpp_conf(dns323c_mpp_modes);
+		break;
 	}
 
 	/* setup flash mapping
@@ -436,53 +635,96 @@ static void __init dns323_init(void)
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
-	/* The 5181 power LED is active low and requires
-	 * DNS323_GPIO_LED_POWER1 to also be low.
-	 */
-	if (dns323_dev_id() == MV88F5181_DEV_ID) {
-		dns323_leds[0].active_low = 1;
-		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
-		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	/* Sort out LEDs, Buttons and i2c devices */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* The 5181 power LED is active low and requires
+		 * DNS323_GPIO_LED_POWER1 to also be low.
+		 */
+		 dns323ab_leds[0].active_low = 1;
+		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+		/* Fall through */
+	case DNS323_REV_B1:
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+				ARRAY_SIZE(dns323ab_i2c_devices));
+		break;
+	case DNS323_REV_C1:
+		/* Hookup LEDs & Buttons */
+		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
+		dns323_button_device.dev.platform_data = &dns323c_button_data;
+
+		/* Hookup i2c devices and fan driver */
+		i2c_register_board_info(0, dns323c_i2c_devices,
+				ARRAY_SIZE(dns323c_i2c_devices));
+		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
+
+		/* Register fixup for the PHY LEDs */
+		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
+					   MARVELL_PHY_ID_MASK,
+					   dns323c_phy_fixup);
 	}
 
 	platform_device_register(&dns323_gpio_leds);
-
 	platform_device_register(&dns323_button_device);
 
-	i2c_register_board_info(0, dns323_i2c_devices,
-				ARRAY_SIZE(dns323_i2c_devices));
-
 	/*
 	 * Configure peripherals.
 	 */
 	if (dns323_read_mac_addr() < 0)
-		printk("DNS323: Failed to read MAC address\n");
-
+		printk("DNS-323: Failed to read MAC address\n");
 	orion5x_ehci0_init();
 	orion5x_eth_init(&dns323_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	/* The 5182 has its SATA controller on-chip, and needs its own little
-	 * init routine.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+	/* Remaining GPIOs */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_B1:
+		/* 5182 built-in SATA init */
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* The 5182 has flag to indicate the system is up. Without this flag
-	 * set, power LED will flash and cannot be controlled via leds-gpio.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
-
-	/* Register dns323 specific power-off method */
-	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-		pr_err("DNS323: failed to setup power-off GPIO\n");
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		/* The DNS323 rev B1 has flag to indicate the system is up.
+		 * Without this flag set, power LED will flash and cannot be
+		 * controlled via leds-gpio.
+		 */
+		if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
+			gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
 		pm_power_off = dns323b_power_off;
-	else
-		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_C1:
+		/* 5182 built-in SATA init */
+		orion5x_sata_init(&dns323_sata_data);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323c_power_off;
+
+		/* Now, -this- should theorically be done by the sata_mv driver
+		 * once I figure out what's going on there. Maybe the behaviour
+		 * of the LEDs should be somewhat passed via the platform_data.
+		 * for now, just whack the register and make the LEDs happy
+		 *
+		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
+		 * somebody else test it.
+		 */
+		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+		break;
+	}
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 60e734c1045..a1d6e46ab03 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -25,6 +25,8 @@ static inline void arch_reset(char mode, const char *cmd)
 	 */
 	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
+	mdelay(200);
+	orion5x_clrbits(CPU_SOFT_RESET, 1);
 }
 
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 161fc2d6120..0f313059977 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -35,7 +35,7 @@ static int cmx2xx_it8152_irq_gpio;
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -46,7 +46,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 		/*
 		 * Only adjust if > 64M on current system
 		 */
-		if (node || (zone_size[0] <= sz))
+		if (zone_size[0] <= sz)
 			return;
 
 		zone_size[1] = zone_size[0] - sz;
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 45c23fd6df3..40b6ac2de87 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -26,6 +26,7 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,7 @@ static void __init colibri_pxa300_init_lcd(void)
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3d1dcb9ac08..461ba408015 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -446,7 +446,7 @@ static struct platform_device corgiled_device = {
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
@@ -715,7 +715,6 @@ static void __init fixup_corgi(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_corgi())
 		mi->bank[0].size = (32*1024*1024);
 	else
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 9e4d9816726..268a9bc6be8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -256,13 +256,9 @@ static void init_sdram_rows(void)
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 dri = 0;
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
 
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
-	return dri;
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
 }
 
 /* find a valid frequency point */
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 96ed1308163..a0ab3082a00 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -34,7 +34,6 @@ void __init eseries_fixup(struct machine_desc *desc,
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_e800())
 		mi->bank[0].size = (128*1024*1024);
 	else
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 890fb90a672..c6305c5b8a7 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -26,8 +26,7 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index f626730ee42..92361a66b22 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,24 +17,11 @@
  */
 #define PHYS_OFFSET	UL(0xa0000000)
 
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
+void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	cmx2xx_pci_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	cmx2xx_pci_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index d60db87dde0..fa6a708b409 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 };
 
 /* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5305a3993e6..5e92d84fe50 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -21,6 +21,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
@@ -396,6 +397,11 @@ static void __init palmt5_udc_init(void)
 	}
 }
 
+static void __init palmt5_reserve(void)
+{
+	memblock_reserve(0xa0200000, 0x1000);
+}
+
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
@@ -421,6 +427,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmt5_init
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 033b567e50b..ce1104d1bc1 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -263,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = {
 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
 };
 
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
 	0, 9, 10, 11
 };
 
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
 };
 
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b4469607a..3d0c9cc2a40 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
@@ -633,6 +634,12 @@ static void __init treo_lcd_power_init(void)
 	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
 }
 
+static void __init treo_reserve(void)
+{
+	memblock_reserve(0xa0000000, 0x1000);
+	memblock_reserve(0xa2000000, 0x1000);
+}
+
 static void __init treo_init(void)
 {
 	pxa_set_ffuart_info(NULL);
@@ -668,6 +675,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
@@ -691,6 +699,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
        .init_machine   = centro_init,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f4abdaafdac..bc2758b5444 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -463,7 +463,6 @@ static void __init fixup_poodle(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (32*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0af36177ff0..c059dac02b6 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -41,10 +41,10 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO95_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO113_AC97_nRESET,
 	GPIO113_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO95_AC97_nRESET,
 };
 
 void pxa27x_assert_ac97reset(int reset_gpio, int on)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413ed0ff..51756c72355 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
@@ -844,7 +847,6 @@ static void __init fixup_spitz(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks = 1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7512b822c6c..83cc3a18c2e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -948,7 +948,6 @@ static void __init fixup_tosa(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index f5d1ae3db3a..d303c6929d3 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -3,8 +3,9 @@
  *
  *  Support for the Zipit Z2 Handheld device.
  *
- *  Author: 	Ken McGuire
- *  Created:	Jan 25, 2009
+ *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on research and code by: Ken McGuire
  *  Based on mainstone.c as modified for the Zipit Z2.
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = {
 	{
 		.name	= "U-Boot Bootloader",
 		.offset	= 0x0,
-		.size	= 0x20000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x20000,
-		.size	= 0x220000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x240000,
-		.size	= 0x5b0000,
-	},
-	{
+		.size	= 0x40000,
+	}, {
 		.name	= "U-Boot Environment",
-		.offset	= 0x7f0000,
+		.offset	= 0x40000,
+		.size	= 0x60000,
+	}, {
+		.name	= "Flash",
+		.offset	= 0x60000,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ee5e392430e..b4575ae9648 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -18,6 +18,7 @@ config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -35,6 +36,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 595be19f8ad..2fa38df2841 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -61,12 +61,11 @@ void __iomem *gic_cpu_base_addr;
 /*
  * Adjust the zones if there are restrictions for DMA access.
  */
-void __init realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole)
+void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
 {
 	unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
 
-	if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+	if (!machine_is_realview_pbx() || size[0] <= dma_size)
 		return;
 
 	size[ZONE_NORMAL] = size[0] - dma_size;
@@ -232,12 +231,27 @@ static unsigned int realview_mmc_status(struct device *dev)
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
 	u32 mask;
 
+	if (machine_is_realview_pb1176()) {
+		static bool inserted = false;
+
+		/*
+		 * The PB1176 does not have the status register,
+		 * assume it is inserted at startup, then invert
+		 * for each call so card insertion/removal will
+		 * be detected anyway. This will not be called if
+		 * GPIO on PL061 is active, which is the proper
+		 * way to do this on the PB1176.
+		 */
+		inserted = !inserted;
+		return inserted ? 0 : 1;
+	}
+
 	if (adev->res.start == REALVIEW_MMCI0_BASE)
 		mask = 1;
 	else
 		mask = 2;
 
-	return !(readl(REALVIEW_SYSMCI) & mask);
+	return readl(REALVIEW_SYSMCI) & mask;
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {
@@ -300,8 +314,13 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -313,6 +332,12 @@ static struct clk_lookup lookups[] = {
 	}, {	/* UART3 */
 		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
+	}, {	/* UART3 is on the dev chip in PB1176 */
+		.dev_id		= "dev:uart3",
+		.clk		= &ref24_clk,
+	}, {	/* UART4 only exists in PB1176 */
+		.dev_id		= "fpga:uart4",
+		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
 		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
@@ -322,12 +347,15 @@ static struct clk_lookup lookups[] = {
 	}, {	/* MMC0 */
 		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
-	}, {	/* EB:CLCD */
+	}, {	/* CLCD is in the PB1176 and EB DevChip */
 		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
 		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:ssp0",
+		.clk		= &ref24_clk,
 	}
 };
 
@@ -342,7 +370,7 @@ static int __init clk_init(void)
 
 	return 0;
 }
-arch_initcall(clk_init);
+core_initcall(clk_init);
 
 /*
  * CLCD support.
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
new file mode 100644
index 00000000000..0c5d749d7b5
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb()		dsb()
+#define rmb()		dmb()
+#define wmb()		mb()
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 2f5ccb29885..002ab5d8c11 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -26,6 +26,7 @@
 /*
  * Peripheral addresses
  */
+#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
 #define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
 #define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
 #define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 830055bb862..5c3c625e3e0 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
 #define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
 #define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2417bbcf97f..5dafc157b27 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -30,10 +30,9 @@
 #endif
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole);
-#define arch_adjust_zones(node, size, hole) \
-	realview_adjust_zones(node, size, hole)
+extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
+#define arch_adjust_zones(size, hole) \
+	realview_adjust_zones(size, hole)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 422ccd70d5f..991c1f8390e 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -128,6 +130,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -212,7 +220,7 @@ AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
 AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
 AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -323,6 +331,26 @@ static struct platform_device pmu_device = {
 	.resource		= pmu_resources,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EB_CHARLCD,
+		.end	= IRQ_EB_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -441,6 +469,7 @@ static void __init realview_eb_init(void)
 
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
+	platform_device_register(&char_lcd_device);
 	eth_device_register();
 	realview_usb_register(realview_eb_isp1761_resources);
 
@@ -457,7 +486,7 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 96568ebfa2b..d2be12eb829 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -122,6 +124,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -143,8 +151,6 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define MPMC_DMA	{ 0, 0 }
 #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
 #define PB1176_CLCD_DMA	{ 0, 0 }
-#define DMAC_IRQ	{ IRQ_PB1176_DMAC, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define SCTL_DMA	{ 0, 0 }
 #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
@@ -165,7 +171,9 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB1176_UART2_DMA	{ 11, 10 }
 #define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
 #define PB1176_UART3_DMA	{ 0x86, 0x87 }
-#define PB1176_SSP_IRQ		{ IRQ_PB1176_SSP, NO_IRQ }
+#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
+#define PB1176_UART4_DMA	{ 0, 0 }
+#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
@@ -173,7 +181,7 @@ AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
 AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
 AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
 AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
 
 /* DevChip Primecells */
 AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
@@ -187,18 +195,16 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
-
-/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
+AMBA_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
-//	&dmac_device,
 	&uart0_device,
 	&uart1_device,
 	&uart2_device,
 	&uart3_device,
+	&uart4_device,
 	&smc_device,
 	&clcd_device,
 	&sctl_device,
@@ -275,6 +281,26 @@ static struct platform_device pmu_device = {
 	.resource		= &pmu_resource,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_PB1176_CHARLCD,
+		.end	= IRQ_PB1176_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -337,6 +363,7 @@ static void __init realview_pb1176_init(void)
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
 	platform_device_register(&pmu_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -351,7 +378,7 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7fbefbbebaf..d591bc00b86 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -123,6 +125,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -189,7 +197,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
@@ -373,7 +381,7 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d3c113b3dfc..6c37621217b 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -25,12 +25,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 
 #include <asm/mach/arch.h>
@@ -113,6 +115,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -179,7 +187,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
@@ -323,7 +331,7 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a235ba30996..9428eff0b11 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -24,6 +24,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -31,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
 #include <asm/smp_twd.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -135,6 +137,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -201,7 +209,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
@@ -409,7 +417,7 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 779b45b3f80..3ba3bab139d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
@@ -304,6 +305,13 @@ static void __init h1940_map_io(void)
 	s3c_pm_init();
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 static void __init h1940_init_irq(void)
 {
 	s3c24xx_init_irq();
@@ -346,6 +354,7 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
+	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index ba93a356a83..054c9f92232 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -119,7 +119,6 @@ static void __init smdk2413_fixup(struct machine_desc *desc,
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 3ca9265b699..f291ac25d31 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -137,7 +137,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 8603b577a24..142d1f92117 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/init.h>
@@ -570,12 +571,20 @@ static void __init rx1950_init_machine(void)
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
     .phys_io = S3C2410_PA_UART,
 	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params = S3C2410_SDRAM_PA + 0x100,
 	.map_io = rx1950_map_io,
+	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index d2946de3f36..6bb44f75a9c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/tty.h>
@@ -191,6 +192,13 @@ static void __init rx3715_map_io(void)
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 static void __init rx3715_init_irq(void)
 {
 	s3c24xx_init_irq();
@@ -214,6 +222,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= rx3715_map_io,
+	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index 3aadbf42c11..087e57f20ad 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -294,7 +294,7 @@ void __init_or_cpufreq s5p6442_setup_clocks(void)
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
 	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
 
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
 			apll, mpll, epll);
 
 	clk_fout_apll.rate = apll;
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 154bca4abc0..af91fefef2c 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
 }
 
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.id		= -1,
@@ -406,14 +411,14 @@ static struct clk init_clocks_disable[] = {
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
+		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "i2s_v32",
 		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
-	}
+		.ctrlbit	= (1 << 6),
+	},
 };
 
 static struct clk init_clocks[] = {
@@ -429,25 +434,25 @@ static struct clk init_clocks[] = {
 		.id		= 0,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<7),
+		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "uart",
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "uart",
 		.id		= 2,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<9),
+		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "uart",
 		.id		= 3,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<10),
+		.ctrlbit	= (1 << 20),
 	},
 };
 
@@ -497,8 +502,8 @@ static struct clksrc_clk clk_sclk_dac = {
 	.clk		= {
 		.name		= "sclk_dac",
 		.id		= -1,
-		.ctrlbit	= (1 << 10),
-		.enable		= s5pv210_clk_ip1_ctrl,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 2),
 	},
 	.sources	= &clkset_sclk_dac,
 	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
@@ -527,8 +532,8 @@ static struct clksrc_clk clk_sclk_hdmi = {
 	.clk		= {
 		.name		= "sclk_hdmi",
 		.id		= -1,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 11),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 0),
 	},
 	.sources	= &clkset_sclk_hdmi,
 	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
@@ -565,8 +570,8 @@ static struct clksrc_clk clk_sclk_audio0 = {
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 0,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 4),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 24),
 	},
 	.sources = &clkset_sclk_audio0,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
@@ -594,8 +599,8 @@ static struct clksrc_clk clk_sclk_audio1 = {
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 1,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 5),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 25),
 	},
 	.sources = &clkset_sclk_audio1,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
@@ -623,8 +628,8 @@ static struct clksrc_clk clk_sclk_audio2 = {
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 2,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 6),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 26),
 	},
 	.sources = &clkset_sclk_audio2,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
@@ -680,8 +685,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "uclk1",
 			.id		= 0,
-			.ctrlbit	= (1<<17),
-			.enable		= s5pv210_clk_ip3_ctrl,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 12),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
@@ -690,8 +695,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 18),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 13),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
@@ -700,8 +705,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 19),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 14),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
@@ -710,8 +715,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 3,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 20),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 15),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
@@ -720,8 +725,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "sclk_mixer",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip1_ctrl,
-			.ctrlbit	= (1 << 9),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 1),
 		},
 		.sources = &clkset_sclk_mixer,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
@@ -738,8 +743,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 24),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 2),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
@@ -748,8 +753,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 25),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 3),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
@@ -758,8 +763,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 26),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 4),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
@@ -768,6 +773,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_cam",
 			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 3),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
@@ -776,6 +783,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_cam",
 			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 4),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
@@ -784,8 +793,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_fimd",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip1_ctrl,
-			.ctrlbit	= (1 << 0),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 5),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
@@ -794,8 +803,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 16),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 8),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
@@ -804,8 +813,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 17),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 9),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
@@ -814,8 +823,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 18),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 10),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
@@ -824,8 +833,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 3,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 19),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 11),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
@@ -864,8 +873,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_csis",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 31),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 6),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
@@ -874,8 +883,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_spi",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 12),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 16),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
@@ -884,8 +893,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_spi",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 13),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 17),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
@@ -894,8 +903,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_pwi",
 			.id		= -1,
-			.enable		= &s5pv210_clk_ip4_ctrl,
-			.ctrlbit	= (1 << 2),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 29),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
@@ -904,8 +913,8 @@ static struct clksrc_clk clksrcs[] = {
 		.clk		= {
 			.name		= "sclk_pwm",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 23),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 19),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index ec03f187c52..b7a9a601c2d 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -13,8 +13,7 @@ extern void __init sa1100_init_gpio(void);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index d5277f9bee7..128a1dfa96b 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -17,10 +17,10 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	sa1111_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 50f071c5bf4..5ea24d4d1ba 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -20,6 +20,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 3053e5b7f16..d9c4812f1c3 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -19,9 +19,8 @@
 
 #ifndef __ASSEMBLY__
 
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
 {
-  if (node != 0) return;
   /* Only the first 4 MB (=1024 Pages) are usable for DMA */
   /* See dev / -> .properties in OpenFirmware. */
   zone_size[1] = zone_size[0] - 1024;
@@ -30,8 +29,8 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig
   zhole_size[0] = 0;
 }
 
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	__arch_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_4M)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f2b88c5fe14..4c704b4e8b3 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -70,6 +70,18 @@ endmenu
 
 menu "Timer and clock configuration"
 
+config SHMOBILE_TIMER_HZ
+	int "Kernel HZ (jiffies per second)"
+	range 32 1024
+	default "128"
+	help
+	  Allows the configuration of the timer frequency. It is customary
+	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
+	  case of low timer frequencies other values may be more suitable.
+	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
+	  to select a HZ value such as 128 that can evenly divide RCLK.
+	  A HZ value that does not divide evenly may cause timer drift.
+
 config SH_TIMER_CMT
 	bool "CMT timer driver"
 	default y
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 5179b72e1ee..132256bb8c8 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -2,7 +2,6 @@
 #define __ASM_MACH_IRQS_H
 
 #define NR_IRQS         512
-#define NR_IRQS_LEGACY  8
 
 #define evt2irq(evt)		(((evt) >> 5) - 16)
 #define irq2evt(irq)		(((irq) + 16) << 5)
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 39f6ccf2229..18febf92f20 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -341,8 +341,11 @@ static struct clk gpio_clk = {
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 13e27c76968..36ff056b732 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -428,8 +428,11 @@ static struct clk gpio2_clk = {
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 6xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5af71d5ba66..5d12d547789 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -1212,6 +1212,8 @@ static struct clk ppm_clk = {
 };
 #endif
 
+static struct clk dummy_apb_pclk;
+
 #define DEF_LOOKUP(devid, clkref)		\
 	{					\
 	.dev_id = devid,			\
@@ -1223,6 +1225,10 @@ static struct clk ppm_clk = {
  * look up through clockdevice.
  */
 static struct clk_lookup lookups[] = {
+	{
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	},
 	/* Connected directly to the AMBA bus */
 	DEF_LOOKUP("amba",      &amba_clk),
 	DEF_LOOKUP("cpu",       &cpu_clk),
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index ab000df7fc0..bf134bcc129 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -35,14 +35,6 @@
 #endif
 
 /*
- * TCM memory whereabouts
- */
-#define ITCM_OFFSET	0xffff2000
-#define ITCM_END	0xffff3fff
-#define DTCM_OFFSET	0xffff4000
-#define DTCM_END	0xffff5fff
-
-/*
  * We enable a real big DMA buffer if need be.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index d2a0b8847a1..bfcda982088 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/memblock.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
@@ -22,6 +23,21 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init u300_reserve(void)
+{
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+        memblock_reserve(PHYS_OFFSET, 0x00100000);
+#endif
+#endif
+}
+
 static void __init u300_init_machine(void)
 {
 	u300_init_devices();
@@ -49,6 +65,7 @@ MACHINE_START(U300, MACH_U300_STRING)
 	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
+	.reserve	= u300_reserve,
 	.init_irq	= u300_init_irq,
 	.timer		= &u300_timer,
 	.init_machine	= u300_init_machine,
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c7bc4199e3a..4556aea9c3c 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b77181..0e8fd135a57 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <plat/pincfg.h>
 #include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+	/* SSP0 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD,
+	GPIO146_SSP0_TXD,
+
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+};
+
 static void ab4500_spi_cs_control(u32 command)
 {
 	/* set the FRM signal, which is CS  - TODO */
@@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = {
 	.cs_control = ab4500_spi_cs_control,
 };
 
+static struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+};
+
 static struct spi_board_info u8500_spi_devices[] = {
 	{
 		.modalias = "ab8500",
 		.controller_data = &ab4500_chip_info,
+		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
 		.chip_select = 0,
 		.mode = SPI_MODE_0,
-		.irq = IRQ_AB4500,
+		.irq = IRQ_DB8500_AB8500,
 	},
 };
 
@@ -118,6 +146,10 @@ static void __init u8500_init_machine(void)
 {
 	int i;
 
+	u8500_init_devices();
+
+	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
 	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
 	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
 	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@ static void __init u8500_init_machine(void)
 
 	spi_register_board_info(u8500_spi_devices,
 			ARRAY_SIZE(u8500_spi_devices));
-
-	u8500_init_devices();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 6544855af2f..d8ab7f184fe 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -16,6 +16,7 @@
 
 #include <asm/clkdev.h>
 
+#include <plat/mtu.h>
 #include <mach/hardware.h>
 #include "clock.h"
 
@@ -59,6 +60,9 @@
 #define PRCM_DMACLK_MGT		0x074
 #define PRCM_B2R2CLK_MGT	0x078
 #define PRCM_TVCLK_MGT		0x07C
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_STOPPED	(1 << 16)
+#define PRCM_TCR_DOZE_MODE	(1 << 17)
 #define PRCM_UNIPROCLK_MGT	0x278
 #define PRCM_SSPCLK_MGT		0x280
 #define PRCM_RNGCLK_MGT		0x284
@@ -120,10 +124,95 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+		+ PRCM_TCR;
+	u32 tcr = readl(addr);
+	int mtu = (int) clk->data;
+	/*
+	 * One of these is selected eventually
+	 * TODO: Replace the constant with a reference
+	 * to the ULP source once this is modeled.
+	 */
+	unsigned long clk32k = 32768;
+	unsigned long mturate;
+	unsigned long retclk;
+
+	/* Get the rate from the parent as a default */
+	if (clk->parent_periph)
+		mturate = clk_get_rate(clk->parent_periph);
+	else if (clk->parent_cluster)
+		mturate = clk_get_rate(clk->parent_cluster);
+	else
+		/* We need to be connected SOMEWHERE */
+		BUG();
+
+	/*
+	 * Are we in doze mode?
+	 * In this mode the parent peripheral or the fixed 32768 Hz
+	 * clock is fed into the block.
+	 */
+	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+		/*
+		 * Here we're using the clock input from the APE ULP
+		 * clock domain. But first: are the timers stopped?
+		 */
+		if (tcr & PRCM_TCR_STOPPED) {
+			clk32k = 0;
+			mturate = 0;
+		} else {
+			/* Else default mode: 0 and 2.4 MHz */
+			clk32k = 0;
+			if (cpu_is_u5500())
+				/* DB5500 divides by 8 */
+				mturate /= 8;
+			else if (cpu_is_u8500ed()) {
+				/*
+				 * This clocking setting must not be used
+				 * in the ED chip, it is simply not
+				 * connected anywhere!
+				 */
+				mturate = 0;
+				BUG();
+			} else
+				/*
+				 * In this mode the ulp38m4 clock is divided
+				 * by a factor 16, on the DB8500 typically
+				 * 38400000 / 16 ~ 2.4 MHz.
+				 * TODO: Replace the constant with a reference
+				 * to the ULP source once this is modeled.
+				 */
+				mturate = 38400000 / 16;
+		}
+	}
+
+	/* Return the clock selected for this MTU */
+	if (tcr & (1 << mtu))
+		retclk = clk32k;
+	else
+		retclk = mturate;
+
+	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+	return retclk;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long rate;
 
+	/*
+	 * If there is a custom getrate callback for this clock,
+	 * it will take precedence.
+	 */
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	if (clk->ops && clk->ops->get_rate)
 		return clk->ops->get_rate(clk);
 
@@ -341,8 +430,9 @@ static DEFINE_PRCC_CLK(5, usb_v1, 	0,  0, NULL);
 
 /* Peripheral Cluster #6 */
 
-static DEFINE_PRCC_CLK(6, mtu1_v1, 	8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 	7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
@@ -357,12 +447,17 @@ static DEFINE_PRCC_CLK(6, rng_v1, 	0,  0, &clk_rngclk);
 /* Peripheral Cluster #7 */
 
 static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 	3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 	2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
 static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
 
+static struct clk clk_dummy_apb_pclk;
+
 static struct clk_lookup u8500_common_clks[] = {
+	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
+
 	/* Peripheral Cluster #1 */
 	CLK(gpio0,	"gpio.0",	NULL),
 	CLK(gpio0,	"gpio.1",	NULL),
@@ -503,15 +598,17 @@ static struct clk_lookup u8500_v1_clks[] = {
 	CLK(uiccclk,	"uicc",		NULL),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	if (cpu_is_u8500ed()) {
 		clk_prcmu_ops.enable = clk_prcmu_ed_enable;
 		clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+		clk_per6clk.rate = 100000000;
 	} else if (cpu_is_u5500()) {
 		/* Clock tree for U5500 not implemented yet */
 		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
 		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+		clk_per6clk.rate = 26000000;
 	}
 
 	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -522,4 +619,3 @@ static int __init clk_init(void)
 
 	return 0;
 }
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index e4f99b65026..a0580250152 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -28,6 +28,9 @@ struct clkops {
  * @ops:		pointer to clkops struct used to control this clock
  * @name:		name, for debugging
  * @enabled:		refcount. positive if enabled, zero if disabled
+ * @get_rate:		custom callback for getting the clock rate
+ * @data:		custom per-clock data for example for the get_rate
+ *			callback
  * @rate:		fixed rate for clocks which don't implement
  * 			ops->getrate
  * @prcmu_cg_off:	address offset of the combined enable/disable register
@@ -67,6 +70,8 @@ struct clk {
 	const struct clkops	*ops;
 	const char 		*name;
 	unsigned int		enabled;
+	unsigned long		(*get_rate)(struct clk *);
+	void			*data;
 
 	unsigned long		rate;
 	struct list_head	list;
@@ -117,9 +122,26 @@ struct clk clk_##_name = {						\
 		.parent_periph 	= _kernclk				\
 	}
 
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops		= &clk_prcc_ops,			\
+		.cluster	= _pclust,				\
+		.prcc_bus	= _bus_en,				\
+		.prcc_kernel	= _kernel_en,				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph	= _kernclk,				\
+		.get_rate	= _callback,				\
+		.data		= (void *) _data			\
+	}
+
+
 #define CLK(_clk, _devname, _conname)			\
 	{						\
 		.clk	= &clk_##_clk,			\
 		.dev_id	= _devname,			\
 		.con_id = _conname,			\
 	}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 6a3ac4539f1..e9278f6d67a 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -21,6 +21,7 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
 static struct platform_device *u5500_platform_devs[] __initdata = {
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d81ad023963..e0fd747e447 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -62,6 +62,12 @@ void __init ux500_init_irq(void)
 {
 	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
 	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 #ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 82290342194..654fca944e6 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -65,7 +65,7 @@ struct amba_device u8500_ssp0_device = {
 		.end   = U8500_SSP0_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {IRQ_SSP0, NO_IRQ },
+	.irq = {IRQ_DB8500_SSP0, NO_IRQ },
 	/* ST-Ericsson modified id */
 	.periphid = SSP_PER_ID,
 };
@@ -77,8 +77,8 @@ static struct resource u8500_i2c0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C0,
-		.end	= IRQ_I2C0,
+		.start	= IRQ_DB8500_I2C0,
+		.end	= IRQ_DB8500_I2C0,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -97,8 +97,8 @@ static struct resource u8500_i2c4_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C4,
-		.end	= IRQ_I2C4,
+		.start	= IRQ_DB8500_I2C4,
+		.end	= IRQ_DB8500_I2C4,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -130,8 +130,8 @@ static struct resource dma40_resources[] = {
 		.name = "lcla",
 	},
 	[3] = {
-		.start = IRQ_DMA,
-		.end = IRQ_DMA,
+		.start = IRQ_DB8500_DMA,
+		.end   = IRQ_DB8500_DMA,
 		.flags = IORESOURCE_IRQ}
 };
 
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
new file mode 100644
index 00000000000..cca4f705601
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_MOP500_H
+#define __MACH_IRQS_BOARD_MOP500_H
+
+#define AB8500_NR_IRQS			104
+
+#define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
+#define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
+					 + AB8500_NR_IRQS)
+#define MOP500_IRQ_END			MOP500_AB8500_IRQ_END
+
+#if MOP500_IRQ_END > IRQ_BOARD_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END	MOP500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
new file mode 100644
index 00000000000..6fbfe5e2065
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB5500_H
+#define __MACH_IRQS_DB5500_H
+
+#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
+#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
+#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
+#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
+#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
+#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
+#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
+#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
+#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
+#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
+#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
+#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
+#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
+#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
+#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
+#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
new file mode 100644
index 00000000000..8b5d9f0a163
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB8500_H
+#define __MACH_IRQS_DB8500_H
+
+#define IRQ_DB8500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB8500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB8500_PMU			(IRQ_SHPI_START + 7)
+#define IRQ_DB8500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB8500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB8500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB8500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB8500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB8500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB8500_SSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB8500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB8500_MSP1_RX		(IRQ_SHPI_START + 16)
+#define IRQ_DB8500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB8500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB8500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB8500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB8500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB8500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB8500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB8500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB8500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB8500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB8500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB8500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB8500_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_DB8500_MSP0			(IRQ_SHPI_START + 31)
+#define IRQ_DB8500_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_DB8500_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_DB8500_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_DB8500_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_DB8500_HSIR_CH4_OVRRUN	(IRQ_SHPI_START + 36)
+#define IRQ_DB8500_HSIR_CH5_OVRRUN	(IRQ_SHPI_START + 37)
+#define IRQ_DB8500_HSIR_CH6_OVRRUN	(IRQ_SHPI_START + 38)
+#define IRQ_DB8500_HSIR_CH7_OVRRUN	(IRQ_SHPI_START + 39)
+#define IRQ_DB8500_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_DB8500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB8500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB8500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB8500_SVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB8500_SVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB8500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB8500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB8500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB8500_SPI3			(IRQ_SHPI_START + 49)
+#define IRQ_DB8500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB8500_I2C4			(IRQ_SHPI_START + 51)
+#define IRQ_DB8500_SSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB8500_SKE			(IRQ_SHPI_START + 53)
+#define IRQ_DB8500_KB			(IRQ_SHPI_START + 54)
+#define IRQ_DB8500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB8500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB8500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB8500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB8500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB8500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB8500_MSP1			(IRQ_SHPI_START + 62)
+#define IRQ_DB8500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB8500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB8500_SRPTIMER		(IRQ_SHPI_START + 97)
+#define IRQ_DB8500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB8500_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_DB8500_SDMMC5		(IRQ_SHPI_START + 100)
+#define IRQ_DB8500_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_DB8500_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_DB8500_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_DB8500_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_DB8500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB8500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB8500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB8500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB8500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB8500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB8500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB8500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB8500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB8500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB8500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB8500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB8500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB8500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB8500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB8500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 7970684b1d0..10385bdc2b7 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,7 +10,8 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
 
 #define IRQ_LOCALTIMER                  29
 #define IRQ_LOCALWDOG                   30
@@ -67,12 +68,21 @@
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
  */
-#define U8500_SOC_NR_IRQS		161
+#define DBX500_NR_INTERNAL_IRQS		161
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + U8500_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - U8500_SOC_NR_IRQS)
-#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
+#define IRQ_BOARD_START			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
-#endif /*ASM_ARCH_IRQS_H*/
+/* This will be overridden by board-specific irq headers */
+#define IRQ_BOARD_END			IRQ_BOARD_START
+
+#ifdef CONFIG_MACH_U8500_MOP
+#include <mach/irqs-board-mop500.h>
+#endif
+
+#define NR_IRQS				IRQ_BOARD_END
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 8552eb188b5..0271ca0a83d 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -30,22 +30,22 @@
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(U8500_UART_FR) & (1 << 5))
 		barrier();
-	writeb(c, U8500_UART_DR);
+	__raw_writeb(c, U8500_UART_DR);
 }
 
 static void flush(void)
 {
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
-	while (readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(U8500_UART_FR) & (1 << 3))
 		barrier();
 }
 
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
new file mode 100644
index 00000000000..9055d5d3233
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -0,0 +1,742 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_PINS_DB8500_H
+#define __MACH_PINS_DB8500_H
+
+/*
+ * TODO: Eventually encode all non-board specific pull up/down configuration
+ * here.
+ */
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
+#define GPIO2_NONE		PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
+#define GPIO3_NONE		PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL		PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA		PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL		PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA		PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA		PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA		PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL		PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL		PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA	PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA		PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL	PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL		PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL		PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA		PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
+#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
+#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
+#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
+#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
+#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
+#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
+#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
+#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
+#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
+#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
+#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
+#define GPIO34_NONE		PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
+#define GPIO35_NONE		PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO		PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
+#define GPIO77_NONE		PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO		PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO		PIN_CFG(84, GPIO)
+#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO		PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO		PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO		PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO		PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO		PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO		PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO		PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO		PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO		PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO		PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO		PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
+#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
+#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
+#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
+#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
+#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
+#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
+#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
+#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
+#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
+#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
+#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL	PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA	PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO		PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO		PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO		PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO		PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO		PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
+#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO		PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
+#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO		PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
+#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO		PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
+#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO		PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
+#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO		PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
+#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO		PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
+#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
+#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
+#define GPIO160_NONE		PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
+#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
+#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
+#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
+#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
+#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
+#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
+#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
+#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
+#define GPIO168_NONE		PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
+#define GPIO202_PWL		PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA	PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL	PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
+#define GPIO226_PWL		PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO		PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO		PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
+#define GPIO229_PWL		PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA	PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO		PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
+#define GPIO230_PWL		PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL	PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO		PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO		PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO		PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
+#define GPIO258_NONE		PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO		PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO		PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO		PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO		PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO		PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO		PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO		PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO		PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO		PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3dff8641b03..e38acb0f89c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,6 +28,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
 
@@ -354,6 +355,21 @@ static struct mmci_platform_data mmc0_plat_data = {
 	.gpio_cd	= -1,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = VERSATILE_CHAR_LCD_BASE,
+		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name           =       "arm-charlcd",
+	.id             =       -1,
+	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
+	.resource       =       char_lcd_resources,
+};
+
 /*
  * Clock handling
  */
@@ -400,8 +416,13 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -425,6 +446,9 @@ static struct clk_lookup lookups[] = {
 	}, {	/* MMC1 */
 		.dev_id		= "fpga:0b",
 		.clk		= &ref24_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:f4",
+		.clk		= &ref24_clk,
 	}, {	/* CLCD */
 		.dev_id		= "dev:20",
 		.clk		= &osc4_clk,
@@ -703,6 +727,12 @@ static struct pl061_platform_data gpio1_plat_data = {
 	.irq_base	= IRQ_GPIO1_START,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -772,7 +802,7 @@ AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -843,6 +873,7 @@ void __init versatile_init(void)
 	platform_device_register(&versatile_flash_device);
 	platform_device_register(&versatile_i2c_device);
 	platform_device_register(&smc91x_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 334f0df4e94..13c7e5f90a8 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -304,7 +304,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 }
 
 
-struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e6f73030d5f..577df6cccb0 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -2,6 +2,7 @@
  * Versatile Express Core Tile Cortex A9x4 Support
  */
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -9,11 +10,13 @@
 #include <linux/amba/clcd.h>
 
 #include <asm/clkdev.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/smp_twd.h>
 
 #include <mach/clkdev.h>
 #include <mach/ct-ca9x4.h>
@@ -51,6 +54,7 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+	twd_base = MMIO_P2V(A9_MPCORE_TWD);
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 
@@ -235,7 +239,7 @@ static void ct_ca9x4_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
-	.phys_io	= V2M_UART0,
+	.phys_io	= V2M_UART0 & SECTION_MASK,
 	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= ct_ca9x4_map_io,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index 8650f04136e..f9e2f8d2296 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -28,6 +28,7 @@
 #define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
 #define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
 #define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_TWD		(CT_CA9X4_MPIC + 0x0600)
 #define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
 
 /*
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d250711b8c7..817f0ad38a0 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -241,7 +241,7 @@ static struct platform_device v2m_flash_device = {
 
 static unsigned int v2m_mmci_status(struct device *dev)
 {
-	return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0));
+	return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
 }
 
 static struct mmci_platform_data v2m_mmci_data = {
@@ -298,8 +298,13 @@ static struct clk osc2_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup v2m_lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:uart0",
 		.clk		= &osc2_clk,
 	}, {	/* UART1 */
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 642207e1819..83c56324a47 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -93,7 +93,7 @@ static struct clk_lookup nuc900_clkregs[] = {
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index b2eda4dc1c3..7a1fa6adb7c 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -36,6 +36,8 @@
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
 #include <mach/fb.h>
+#include <mach/regs-ldm.h>
+#include <mach/w90p910_keypad.h>
 
 #include "cpu.h"
 
@@ -207,7 +209,7 @@ static struct nuc900_spi_info nuc900_spiflash_data = {
 	.divider	= 24,
 	.sleep		= 0,
 	.txnum		= 0,
-	.txbitlen	= 1,
+	.txbitlen	= 8,
 	.bus_num	= 0,
 };
 
@@ -256,7 +258,7 @@ static struct spi_board_info nuc900_spi_board_info[] __initdata = {
 		.modalias = "m25p80",
 		.max_speed_hz = 20000000,
 		.bus_num = 0,
-		.chip_select = 1,
+		.chip_select = 0,
 		.platform_data = &nuc900_spi_flash_data,
 		.mode = SPI_MODE_0,
 	},
@@ -361,6 +363,39 @@ struct platform_device nuc900_device_fmi = {
 
 /* KPI controller*/
 
+static int nuc900_keymap[] = {
+	KEY(0, 0, KEY_A),
+	KEY(0, 1, KEY_B),
+	KEY(0, 2, KEY_C),
+	KEY(0, 3, KEY_D),
+
+	KEY(1, 0, KEY_E),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_H),
+
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_J),
+	KEY(2, 2, KEY_K),
+	KEY(2, 3, KEY_L),
+
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P),
+};
+
+static struct matrix_keymap_data nuc900_map_data = {
+	.keymap			= nuc900_keymap,
+	.keymap_size		= ARRAY_SIZE(nuc900_keymap),
+};
+
+struct w90p910_keypad_platform_data nuc900_keypad_info = {
+	.keymap_data	= &nuc900_map_data,
+	.prescale	= 0xfa,
+	.debounce	= 0x50,
+};
+
 static struct resource nuc900_kpi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_KPI,
@@ -380,9 +415,49 @@ struct platform_device nuc900_device_kpi = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
 	.resource	= nuc900_kpi_resource,
+	.dev		= {
+				.platform_data = &nuc900_keypad_info,
+			}
 };
 
-#ifdef CONFIG_FB_NUC900
+/* LCD controller*/
+
+static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc900_lcd_info[0],
+#else
+	.displays		= nuc900_lcd_info,
+#endif
+	.num_displays		= ARRAY_SIZE(nuc900_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
 
 static struct resource nuc900_lcd_resource[] = {
 	[0] = {
@@ -406,23 +481,10 @@ struct platform_device nuc900_device_lcd = {
 	.dev              = {
 		.dma_mask               = &nuc900_device_lcd_dmamask,
 		.coherent_dma_mask      = -1,
+		.platform_data = &nuc900_fb_info,
 	}
 };
 
-void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
-{
-	struct nuc900fb_mach_info *npd;
-
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
-	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
-		nuc900_device_lcd.dev.platform_data = npd;
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif
-
 /* AUDIO controller*/
 static u64 nuc900_device_audio_dmamask = -1;
 static struct resource nuc900_ac97_resource[] = {
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
new file mode 100644
index 00000000000..6087abd93ef
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-gcr.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_GCR_H
+#define __ASM_ARCH_REGS_GCR_H
+
+/* Global control registers */
+
+#define GCR_BA		W90X900_VA_GCR
+#define REG_PDID	(GCR_BA+0x000)
+#define REG_PWRON	(GCR_BA+0x004)
+#define REG_ARBCON	(GCR_BA+0x008)
+#define REG_MFSEL	(GCR_BA+0x00C)
+#define REG_EBIDPE	(GCR_BA+0x010)
+#define REG_LCDDPE	(GCR_BA+0x014)
+#define REG_GPIOCPE	(GCR_BA+0x018)
+#define REG_GPIODPE	(GCR_BA+0x01C)
+#define REG_GPIOEPE	(GCR_BA+0x020)
+#define REG_GPIOFPE	(GCR_BA+0x024)
+#define REG_GPIOGPE	(GCR_BA+0x028)
+#define REG_GPIOHPE	(GCR_BA+0x02C)
+#define REG_GPIOIPE	(GCR_BA+0x030)
+#define REG_GTMP1	(GCR_BA+0x034)
+#define REG_GTMP2	(GCR_BA+0x038)
+#define REG_GTMP3	(GCR_BA+0x03C)
+
+#endif /*  __ASM_ARCH_REGS_GCR_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index b3edc3cccf5..04d295f89eb 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,51 +20,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
-#include <mach/regs-ldm.h>
 #include <mach/fb.h>
 
 #include "nuc950.h"
 
-#ifdef CONFIG_FB_NUC900
-/* LCD Controller */
-static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
-	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
-	[0] = {
-		.type		= LCM_DCCS_VA_SRC_RGB565,
-		.width 		= 320,
-		.height		= 240,
-		.xres		= 320,
-		.yres		= 240,
-		.bpp		= 16,
-		.pixclock	= 200000,
-		.left_margin	= 34,
-		.right_margin   = 54,
-		.hsync_len	= 10,
-		.upper_margin	= 18,
-		.lower_margin	= 4,
-		.vsync_len	= 1,
-		.dccs		= 0x8e00041a,
-		.devctl		= 0x060800c0,
-		.fbctrl		= 0x00a000a0,
-		.scale		= 0x04000400,
-	},
-};
-
-static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
-#if defined(CONFIG_GPM1040A0_320X240)
-	.displays		= &nuc950_lcd_info[0],
-#else
-	.displays		= nuc950_lcd_info,
-#endif
-	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
-	.default_display	= 0,
-	.gpio_dir		= 0x00000004,
-	.gpio_dir_mask		= 0xFFFFFFFD,
-	.gpio_data		= 0x00000004,
-	.gpio_data_mask		= 0xFFFFFFFD,
-};
-#endif
-
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -74,9 +33,6 @@ static void __init nuc950evb_map_io(void)
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
-#ifdef CONFIG_FB_NUC900
-	nuc900_fb_set_platdata(&nuc950_fb_info);
-#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
index 656f03b3b62..1523f413698 100644
--- a/arch/arm/mach-w90x900/nuc910.c
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -26,6 +26,8 @@
 static struct platform_device *nuc910_dev[] __initdata = {
 	&nuc900_device_ts,
 	&nuc900_device_rtc,
+	&nuc900_device_lcd,
+	&nuc900_device_kpi,
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 4d1f1ab044c..5704f74a50e 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -26,9 +26,7 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
-#ifdef CONFIG_FB_NUC900
 	&nuc900_device_lcd,
-#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 346ae14824a..87ec141fcaa 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -717,17 +717,6 @@ config TLS_REG_EMUL
 	  a few prototypes like that in existence) and therefore access to
 	  that required register must be emulated.
 
-config HAS_TLS_REG
-	bool
-	depends on !TLS_REG_EMUL
-	default y if SMP || CPU_32v7
-	help
-	  This selects support for the CP15 thread register.
-	  It is defined to be available on some ARMv6 processors (including
-	  all SMP capable ARMv6's) or later processors.  User space may
-	  assume directly accessing that register and always obtain the
-	  expected value only on ARMv7 and above.
-
 config NEEDS_SYSCALL_FOR_CMPXCHG
 	bool
 	help
@@ -735,6 +724,25 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 
@@ -794,6 +802,8 @@ config ARM_L1_CACHE_SHIFT
 
 config ARM_DMA_MEM_BUFFERABLE
 	bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+		     MACH_REALVIEW_PB11MP)
 	default y if CPU_V6 || CPU_V7
 	help
 	  Historically, the kernel has used strongly ordered mappings to
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index e8d34a80851..d63b6c41375 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -15,7 +15,6 @@ endif
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f98c358989..d073b64ae87 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -924,8 +924,20 @@ static int __init alignment_init(void)
 		ai_usermode = UM_FIXUP;
 	}
 
-	hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
-	hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
+	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+			"alignment exception");
+
+	/*
+	 * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section
+	 * fault, not as alignment error.
+	 *
+	 * TODO: handle ARMv6K properly. Runtime check for 'K' extension is
+	 * needed.
+	 */
+	if (cpu_architecture() <= CPU_ARCH_ARMv6) {
+		hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN,
+				"alignment exception");
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9819869d2bc..9982eb385c0 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,14 +32,14 @@ static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
 static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -47,14 +47,14 @@ static inline void l2x0_clean_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 }
 
 static inline void l2x0_inv_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -75,9 +75,9 @@ static inline void l2x0_flush_line(unsigned long addr)
 
 	/* Clean by PA followed by Invalidate by PA */
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 #else
 
@@ -90,7 +90,7 @@ static inline void l2x0_flush_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
 }
 #endif
 
@@ -109,7 +109,7 @@ static inline void l2x0_inv_all(void)
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
@@ -215,8 +215,11 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 
 	l2x0_base = base;
 
-	cache_id = readl(l2x0_base + L2X0_CACHE_ID);
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
+	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	aux &= aux_mask;
+	aux |= aux_val;
 
 	/* Determine the number of ways */
 	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
@@ -245,17 +248,15 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
 
 		/* l2x0 controller is disabled */
-		aux &= aux_mask;
-		aux |= aux_val;
-		writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
 		l2x0_inv_all();
 
 		/* enable L2X0 */
-		writel(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
 	outer_cache.inv_range = l2x0_inv_range;
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index e46ecd84713..86aa689ef1a 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -211,8 +211,9 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_SMP
-	str	r0, [r0]			@ write for ownership
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
 #endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
@@ -234,7 +235,7 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
@@ -257,7 +258,7 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -283,9 +284,13 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
+#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -295,6 +300,11 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)
 
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 5eb4fd93893..ac163de7dc0 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -18,7 +18,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %0				\n\
+	mov	ip, %2				\n\
 1:	mov	lr, r1				\n\
 	ldmia	r1!, {r2 - r9}			\n\
 	pld	[lr, #32]			\n\
@@ -64,7 +64,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
 	ldmfd	sp!, {r4-r9, pc}"
 	:
-	: "I" (PAGE_SIZE));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 7c2eb55cd4a..cb589cbb2b6 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -27,7 +27,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
@@ -44,7 +44,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
 	ldmfd	 sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 172e6a55458..30c7d048a32 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -25,7 +25,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
@@ -40,7 +40,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
 	ldmfd	sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 747ad4140fc..f9cde0702f1 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -34,7 +34,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %0				\n\
+	mov	lr, %2				\n\
 						\n\
 	pld	[r1, #0]			\n\
 	pld	[r1, #32]			\n\
@@ -67,7 +67,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 						\n\
 	ldmfd	sp!, {r4, r5, pc}"
 	:
-	: "I" (PAGE_SIZE / 64 - 1));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
deleted file mode 100644
index c8c0c4b0f0a..00000000000
--- a/arch/arm/mm/discontig.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mm/discontig.c
- *
- * Discontiguous memory support.
- *
- * Initial code: Copyright (C) 1999-2000 Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mmzone.h>
-#include <linux/bootmem.h>
-
-#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
-# error Fix Me Please
-#endif
-
-/*
- * Our node_data structure for discontiguous memory.
- */
-
-pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &bootmem_node_data[0] },
-  { .bdata = &bootmem_node_data[1] },
-  { .bdata = &bootmem_node_data[2] },
-  { .bdata = &bootmem_node_data[3] },
-#if MAX_NUMNODES == 16
-  { .bdata = &bootmem_node_data[4] },
-  { .bdata = &bootmem_node_data[5] },
-  { .bdata = &bootmem_node_data[6] },
-  { .bdata = &bootmem_node_data[7] },
-  { .bdata = &bootmem_node_data[8] },
-  { .bdata = &bootmem_node_data[9] },
-  { .bdata = &bootmem_node_data[10] },
-  { .bdata = &bootmem_node_data[11] },
-  { .bdata = &bootmem_node_data[12] },
-  { .bdata = &bootmem_node_data[13] },
-  { .bdata = &bootmem_node_data[14] },
-  { .bdata = &bootmem_node_data[15] },
-#endif
-};
-
-EXPORT_SYMBOL(discontig_node_data);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 13fa536d82e..c704eed63c5 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -24,15 +24,6 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = ISA_DMA_THRESHOLD;
@@ -123,6 +114,15 @@ static void __dma_free_buffer(struct page *page, size_t size)
 }
 
 #ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -183,6 +183,8 @@ static void *
 __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 {
 	struct arm_vmregion *c;
+	size_t align;
+	int bit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -191,9 +193,20 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	}
 
 	/*
+	 * Align the virtual region allocation - maximum alignment is
+	 * a section size, minimum is a page size.  This helps reduce
+	 * fragmentation of the DMA space, and also prevents allocations
+	 * smaller than a section from crossing a section boundary.
+	 */
+	bit = fls(size - 1) + 1;
+	if (bit > SECTION_SHIFT)
+		bit = SECTION_SHIFT;
+	align = 1 << bit;
+
+	/*
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
-	c = arm_vmregion_alloc(&consistent_head, size,
+	c = arm_vmregion_alloc(&consistent_head, align, size,
 			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
 	if (c) {
 		pte_t *pte;
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 92f5801f99c..23b0b03af5e 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -393,6 +393,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	if (addr < TASK_SIZE)
 		return do_page_fault(addr, fsr, regs);
 
+	if (user_mode(regs))
+		goto bad_area;
+
 	index = pgd_index(addr);
 
 	/*
@@ -410,7 +413,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	pmd_k = pmd_offset(pgd_k, addr);
 	pmd   = pmd_offset(pgd, addr);
 
-	if (pmd_none(*pmd_k))
+	/*
+	 * On ARM one Linux PGD entry contains two hardware entries (see page
+	 * tables layout in pgtable.h). We normally guarantee that we always
+	 * fill both L1 entries. But create_mapping() doesn't follow the rule.
+	 * It can create inidividual L1 entries, so here we have to call
+	 * pmd_none() check for the entry really corresponded to address, not
+	 * for the first of pair.
+	 */
+	index = (addr >> SECTION_SHIFT) & 1;
+	if (pmd_none(pmd_k[index]))
 		goto bad_area;
 
 	copy_pmd(pmd, pmd_k);
@@ -460,15 +472,10 @@ static struct fsr_info {
 	 * defines these to be "precise" aborts.
 	 */
 	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
-/* Do we need runtime check ? */
-#if __LINUX_ARM_ARCH__ < 6
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-#else
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"I-cache maintenance fault"	   },
-#endif
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
@@ -505,13 +512,15 @@ static struct fsr_info {
 
 void __init
 hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		int sig, const char *name)
+		int sig, int code, const char *name)
 {
-	if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
-		fsr_info[nr].fn   = fn;
-		fsr_info[nr].sig  = sig;
-		fsr_info[nr].name = name;
-	}
+	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
+		BUG();
+
+	fsr_info[nr].fn   = fn;
+	fsr_info[nr].sig  = sig;
+	fsr_info[nr].code = code;
+	fsr_info[nr].name = name;
 }
 
 /*
@@ -591,3 +600,25 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+static int __init exceptions_init(void)
+{
+	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
+		hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR,
+				"I-cache maintenance fault");
+	}
+
+	if (cpu_architecture() >= CPU_ARCH_ARMv7) {
+		/*
+		 * TODO: Access flag faults introduced in ARMv6K.
+		 * Runtime check for 'K' extension is needed
+		 */
+		hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+		hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+	}
+
+	return 0;
+}
+
+arch_initcall(exceptions_init);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 77b030f5ec0..6ab244062b4 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -48,7 +48,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	debug_kmap_atomic(type);
 
-	kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * There is no cache coherency issue when non VIVT, so force the
+	 * dedicated kmap usage for better debugging purposes in that case.
+	 */
+	if (!cache_is_vivt())
+		kmap = NULL;
+	else
+#endif
+		kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
 
@@ -154,19 +163,22 @@ static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
 
 void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
 {
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+	unsigned int idx, cpu;
+	int *depth;
 	unsigned long vaddr, flags;
 	pte_t pte, *ptep;
 
+	if (!in_interrupt())
+		preempt_disable();
+
+	cpu = smp_processor_id();
+	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+
 	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	ptep = TOP_PTE(vaddr);
 	pte = mk_pte(page, kmap_prot);
 
-	if (!in_interrupt())
-		preempt_disable();
-
 	raw_local_irq_save(flags);
 	(*depth)++;
 	if (pte_val(*ptep) == pte_val(pte)) {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 1ba6cf5a2c0..7185b00650f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/initrd.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
@@ -79,38 +80,37 @@ struct meminfo meminfo;
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, node, i;
+	int shared = 0, cached = 0, slab = 0, i;
 	struct meminfo * mi = &meminfo;
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	for_each_online_node(node) {
-		for_each_nodebank (i,mi,node) {
-			struct membank *bank = &mi->bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
-
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
-
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
-
-			do {
-				total++;
-				if (PageReserved(page))
-					reserved++;
-				else if (PageSwapCache(page))
-					cached++;
-				else if (PageSlab(page))
-					slab++;
-				else if (!page_count(page))
-					free++;
-				else
-					shared += page_count(page) - 1;
-				page++;
-			} while (page < end);
-		}
+
+	for_each_bank (i, mi) {
+		struct membank *bank = &mi->bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (PageSlab(page))
+				slab++;
+			else if (!page_count(page))
+				free++;
+			else
+				shared += page_count(page) - 1;
+			page++;
+		} while (page < end);
 	}
 
 	printk("%d pages of RAM\n", total);
@@ -121,7 +121,7 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-static void __init find_node_limits(int node, struct meminfo *mi,
+static void __init find_limits(struct meminfo *mi,
 	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
 {
 	int i;
@@ -129,7 +129,7 @@ static void __init find_node_limits(int node, struct meminfo *mi,
 	*min = -1UL;
 	*max_low = *max_high = 0;
 
-	for_each_nodebank(i, mi, node) {
+	for_each_bank (i, mi) {
 		struct membank *bank = &mi->bank[i];
 		unsigned long start, end;
 
@@ -147,155 +147,64 @@ static void __init find_node_limits(int node, struct meminfo *mi,
 	}
 }
 
-/*
- * FIXME: We really want to avoid allocating the bootmap bitmap
- * over the top of the initrd.  Hopefully, this is located towards
- * the start of a bank, so if we allocate the bootmap bitmap at
- * the end, we won't clash.
- */
-static unsigned int __init
-find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
-{
-	unsigned int start_pfn, i, bootmap_pfn;
-
-	start_pfn   = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
-	bootmap_pfn = 0;
-
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		unsigned int start, end;
-
-		start = bank_pfn_start(bank);
-		end   = bank_pfn_end(bank);
-
-		if (end < start_pfn)
-			continue;
-
-		if (start < start_pfn)
-			start = start_pfn;
-
-		if (end <= start)
-			continue;
-
-		if (end - start >= bootmap_pages) {
-			bootmap_pfn = start;
-			break;
-		}
-	}
-
-	if (bootmap_pfn == 0)
-		BUG();
-
-	return bootmap_pfn;
-}
-
-static int __init check_initrd(struct meminfo *mi)
-{
-	int initrd_node = -2;
-#ifdef CONFIG_BLK_DEV_INITRD
-	unsigned long end = phys_initrd_start + phys_initrd_size;
-
-	/*
-	 * Make sure that the initrd is within a valid area of
-	 * memory.
-	 */
-	if (phys_initrd_size) {
-		unsigned int i;
-
-		initrd_node = -1;
-
-		for (i = 0; i < mi->nr_banks; i++) {
-			struct membank *bank = &mi->bank[i];
-			if (bank_phys_start(bank) <= phys_initrd_start &&
-			    end <= bank_phys_end(bank))
-				initrd_node = bank->node;
-		}
-	}
-
-	if (initrd_node == -1) {
-		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
-		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, phys_initrd_size);
-		phys_initrd_start = phys_initrd_size = 0;
-	}
-#endif
-
-	return initrd_node;
-}
-
-static void __init bootmem_init_node(int node, struct meminfo *mi,
+static void __init arm_bootmem_init(struct meminfo *mi,
 	unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long boot_pfn;
 	unsigned int boot_pages;
+	phys_addr_t bitmap;
 	pg_data_t *pgdat;
 	int i;
 
 	/*
-	 * Allocate the bootmem bitmap page.
+	 * Allocate the bootmem bitmap page.  This must be in a region
+	 * of memory which has already been mapped.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+				__pfn_to_phys(end_pfn));
 
 	/*
-	 * Initialise the bootmem allocator for this node, handing the
+	 * Initialise the bootmem allocator, handing the
 	 * memory banks over to bootmem.
 	 */
-	node_set_online(node);
-	pgdat = NODE_DATA(node);
-	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+	node_set_online(0);
+	pgdat = NODE_DATA(0);
+	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
 
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		struct membank *bank = &mi->bank[i];
 		if (!bank->highmem)
-			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+			free_bootmem(bank_phys_start(bank), bank_phys_size(bank));
 	}
 
 	/*
-	 * Reserve the bootmem bitmap for this node.
+	 * Reserve the memblock reserved regions in bootmem.
 	 */
-	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
-			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-}
-
-static void __init bootmem_reserve_initrd(int node)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	pg_data_t *pgdat = NODE_DATA(node);
-	int res;
-
-	res = reserve_bootmem_node(pgdat, phys_initrd_start,
-			     phys_initrd_size, BOOTMEM_EXCLUSIVE);
-
-	if (res == 0) {
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	} else {
-		printk(KERN_ERR
-			"INITRD: 0x%08lx+0x%08lx overlaps in-use "
-			"memory region - disabling initrd\n",
-			phys_initrd_start, phys_initrd_size);
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		phys_addr_t start = memblock_start_pfn(&memblock.reserved, i);
+		if (start >= start_pfn &&
+		    memblock_end_pfn(&memblock.reserved, i) <= end_pfn)
+			reserve_bootmem_node(pgdat, __pfn_to_phys(start),
+				memblock_size_bytes(&memblock.reserved, i),
+				BOOTMEM_DEFAULT);
 	}
-#endif
 }
 
-static void __init bootmem_free_node(int node, struct meminfo *mi)
+static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
+	unsigned long max_low, unsigned long max_high)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long min, max_low, max_high;
 	int i;
 
-	find_node_limits(node, mi, &min, &max_low, &max_high);
-
 	/*
-	 * initialise the zones within this node.
+	 * initialise the zones.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
 
 	/*
-	 * The size of this node has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory to the
-	 * zones, now is the time to do it.
+	 * The memory size has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory
+	 * to the zones, now is the time to do it.
 	 */
 	zone_size[0] = max_low - min;
 #ifdef CONFIG_HIGHMEM
@@ -303,11 +212,11 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 #endif
 
 	/*
-	 * For each bank in this node, calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes_in_node)
+	 * Calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes)
 	 */
 	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		int idx = 0;
 #ifdef CONFIG_HIGHMEM
 		if (mi->bank[i].highmem)
@@ -320,24 +229,23 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	 * Adjust the sizes according to any special requirements for
 	 * this machine type.
 	 */
-	arch_adjust_zones(node, zone_size, zhole_size);
+	arch_adjust_zones(zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, min, zhole_size);
+	free_area_init_node(0, zone_size, min, zhole_size);
 }
 
 #ifndef CONFIG_SPARSEMEM
 int pfn_valid(unsigned long pfn)
 {
-	struct meminfo *mi = &meminfo;
-	unsigned int left = 0, right = mi->nr_banks;
+	struct memblock_region *mem = &memblock.memory;
+	unsigned int left = 0, right = mem->cnt;
 
 	do {
 		unsigned int mid = (right + left) / 2;
-		struct membank *bank = &mi->bank[mid];
 
-		if (pfn < bank_pfn_start(bank))
+		if (pfn < memblock_start_pfn(mem, mid))
 			right = mid;
-		else if (pfn >= bank_pfn_end(bank))
+		else if (pfn >= memblock_end_pfn(mem, mid))
 			left = mid + 1;
 		else
 			return 1;
@@ -346,73 +254,69 @@ int pfn_valid(unsigned long pfn)
 }
 EXPORT_SYMBOL(pfn_valid);
 
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
 	int i;
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
-	}
+	for (i = 0; i < memblock.memory.cnt; i++)
+		memory_present(0, memblock_start_pfn(&memblock.memory, i),
+				  memblock_end_pfn(&memblock.memory, i));
 }
 #endif
 
-void __init bootmem_init(void)
+void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 {
-	struct meminfo *mi = &meminfo;
-	unsigned long min, max_low, max_high;
-	int node, initrd_node;
+	int i;
 
-	/*
-	 * Locate which node contains the ramdisk image, if any.
-	 */
-	initrd_node = check_initrd(mi);
+	memblock_init();
+	for (i = 0; i < mi->nr_banks; i++)
+		memblock_add(mi->bank[i].start, mi->bank[i].size);
 
-	max_low = max_high = 0;
+	/* Register the kernel text, kernel data and initrd with memblock. */
+#ifdef CONFIG_XIP_KERNEL
+	memblock_reserve(__pa(_data), _end - _data);
+#else
+	memblock_reserve(__pa(_stext), _end - _stext);
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
 
-	/*
-	 * Run through each node initialising the bootmem allocator.
-	 */
-	for_each_node(node) {
-		unsigned long node_low, node_high;
+		/* Now convert initrd to virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
 
-		find_node_limits(node, mi, &min, &node_low, &node_high);
+	arm_mm_memblock_reserve();
 
-		if (node_low > max_low)
-			max_low = node_low;
-		if (node_high > max_high)
-			max_high = node_high;
+	/* reserve any platform specific memblock areas */
+	if (mdesc->reserve)
+		mdesc->reserve();
 
-		/*
-		 * If there is no memory in this node, ignore it.
-		 * (We can't have nodes which have no lowmem)
-		 */
-		if (node_low == 0)
-			continue;
+	memblock_analyze();
+	memblock_dump_all();
+}
 
-		bootmem_init_node(node, mi, min, node_low);
+void __init bootmem_init(void)
+{
+	struct meminfo *mi = &meminfo;
+	unsigned long min, max_low, max_high;
 
-		/*
-		 * Reserve any special node zero regions.
-		 */
-		if (node == 0)
-			reserve_node_zero(NODE_DATA(node));
+	max_low = max_high = 0;
 
-		/*
-		 * If the initrd is in this node, reserve its memory.
-		 */
-		if (node == initrd_node)
-			bootmem_reserve_initrd(node);
+	find_limits(mi, &min, &max_low, &max_high);
 
-		/*
-		 * Sparsemem tries to allocate bootmem in memory_present(),
-		 * so must be done after the fixed reservations
-		 */
-		arm_memory_present(mi, node);
-	}
+	arm_bootmem_init(mi, min, max_low);
+
+	/*
+	 * Sparsemem tries to allocate bootmem in memory_present(),
+	 * so must be done after the fixed reservations
+	 */
+	arm_memory_present();
 
 	/*
 	 * sparse_init() needs the bootmem allocator up and running.
@@ -420,12 +324,11 @@ void __init bootmem_init(void)
 	sparse_init();
 
 	/*
-	 * Now free memory in each node - free_area_init_node needs
+	 * Now free the memory - free_area_init_node needs
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
-	for_each_node(node)
-		bootmem_free_node(node, mi);
+	arm_bootmem_free(mi, min, max_low, max_high);
 
 	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
@@ -460,7 +363,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 }
 
 static inline void
-free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct page *start_pg, *end_pg;
 	unsigned long pg, pgend;
@@ -483,40 +386,39 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	 * free the section of the memmap array.
 	 */
 	if (pg < pgend)
-		free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+		free_bootmem(pg, pgend - pg);
 }
 
 /*
  * The mem_map array can get very big.  Free the unused area of the memory map.
  */
-static void __init free_unused_memmap_node(int node, struct meminfo *mi)
+static void __init free_unused_memmap(struct meminfo *mi)
 {
 	unsigned long bank_start, prev_bank_end = 0;
 	unsigned int i;
 
 	/*
-	 * [FIXME] This relies on each bank being in address order.  This
-	 * may not be the case, especially if the user has provided the
-	 * information on the command line.
+	 * This relies on each bank being in address order.
+	 * The banks are sorted previously in bootmem_init().
 	 */
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		struct membank *bank = &mi->bank[i];
 
 		bank_start = bank_pfn_start(bank);
-		if (bank_start < prev_bank_end) {
-			printk(KERN_ERR "MEM: unordered memory banks.  "
-				"Not freeing memmap.\n");
-			break;
-		}
 
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
 		 */
-		if (prev_bank_end && prev_bank_end != bank_start)
-			free_memmap(node, prev_bank_end, bank_start);
+		if (prev_bank_end && prev_bank_end < bank_start)
+			free_memmap(prev_bank_end, bank_start);
 
-		prev_bank_end = bank_pfn_end(bank);
+		/*
+		 * Align up here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank end aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
 	}
 }
 
@@ -528,21 +430,19 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 void __init mem_init(void)
 {
 	unsigned long reserved_pages, free_pages;
-	int i, node;
+	int i;
+#ifdef CONFIG_HAVE_TCM
+	/* These pointers are filled in on TCM detection */
+	extern u32 dtcm_end;
+	extern u32 itcm_end;
+#endif
 
-#ifndef CONFIG_DISCONTIGMEM
 	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-#endif
 
 	/* this will put all unused low memory onto the freelists */
-	for_each_online_node(node) {
-		pg_data_t *pgdat = NODE_DATA(node);
+	free_unused_memmap(&meminfo);
 
-		free_unused_memmap_node(node, &meminfo);
-
-		if (pgdat->node_spanned_pages != 0)
-			totalram_pages += free_all_bootmem_node(pgdat);
-	}
+	totalram_pages += free_all_bootmem();
 
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
@@ -552,39 +452,35 @@ void __init mem_init(void)
 
 #ifdef CONFIG_HIGHMEM
 	/* set highmem page free */
-	for_each_online_node(node) {
-		for_each_nodebank (i, &meminfo, node) {
-			unsigned long start = bank_pfn_start(&meminfo.bank[i]);
-			unsigned long end = bank_pfn_end(&meminfo.bank[i]);
-			if (start >= max_low_pfn + PHYS_PFN_OFFSET)
-				totalhigh_pages += free_area(start, end, NULL);
-		}
+	for_each_bank (i, &meminfo) {
+		unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+		unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+		if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+			totalhigh_pages += free_area(start, end, NULL);
 	}
 	totalram_pages += totalhigh_pages;
 #endif
 
 	reserved_pages = free_pages = 0;
 
-	for_each_online_node(node) {
-		for_each_nodebank(i, &meminfo, node) {
-			struct membank *bank = &meminfo.bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
-
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
-
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
-
-			do {
-				if (PageReserved(page))
-					reserved_pages++;
-				else if (!page_count(page))
-					free_pages++;
-				page++;
-			} while (page < end);
-		}
+	for_each_bank(i, &meminfo) {
+		struct membank *bank = &meminfo.bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			if (PageReserved(page))
+				reserved_pages++;
+			else if (!page_count(page))
+				free_pages++;
+			page++;
+		} while (page < end);
 	}
 
 	/*
@@ -611,6 +507,10 @@ void __init mem_init(void)
 
 	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
 			"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_HAVE_TCM
+			"    DTCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+			"    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#endif
 			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #ifdef CONFIG_MMU
 			"    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
@@ -627,6 +527,10 @@ void __init mem_init(void)
 
 			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
 				(PAGE_SIZE)),
+#ifdef CONFIG_HAVE_TCM
+			MLK(DTCM_OFFSET, (unsigned long) dtcm_end),
+			MLK(ITCM_OFFSET, (unsigned long) itcm_end),
+#endif
 			MLK(FIXADDR_START, FIXADDR_TOP),
 #ifdef CONFIG_MMU
 			MLM(CONSISTENT_BASE, CONSISTENT_END),
@@ -678,10 +582,10 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 #ifdef CONFIG_HAVE_TCM
-	extern char *__tcm_start, *__tcm_end;
+	extern char __tcm_start, __tcm_end;
 
-	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
-				    __phys_to_pfn(__pa(__tcm_end)),
+	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 28c8b950ef0..ab506272b2d 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -42,78 +42,11 @@
  */
 #define VM_ARM_SECTION_MAPPING	0x80000000
 
-static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
-			  unsigned long phys_addr, const struct mem_type *type)
-{
-	pgprot_t prot = __pgprot(type->prot_pte);
-	pte_t *pte;
-
-	pte = pte_alloc_kernel(pmd, addr);
-	if (!pte)
-		return -ENOMEM;
-
-	do {
-		if (!pte_none(*pte))
-			goto bad;
-
-		set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
-		phys_addr += PAGE_SIZE;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-	return 0;
-
- bad:
-	printk(KERN_CRIT "remap_area_pte: page already exists\n");
-	BUG();
-}
-
-static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr,
-				 unsigned long end, unsigned long phys_addr,
-				 const struct mem_type *type)
-{
-	unsigned long next;
-	pmd_t *pmd;
-	int ret = 0;
-
-	pmd = pmd_alloc(&init_mm, pgd, addr);
-	if (!pmd)
-		return -ENOMEM;
-
-	do {
-		next = pmd_addr_end(addr, end);
-		ret = remap_area_pte(pmd, addr, next, phys_addr, type);
-		if (ret)
-			return ret;
-		phys_addr += next - addr;
-	} while (pmd++, addr = next, addr != end);
-	return ret;
-}
-
-static int remap_area_pages(unsigned long start, unsigned long pfn,
-			    size_t size, const struct mem_type *type)
-{
-	unsigned long addr = start;
-	unsigned long next, end = start + size;
-	unsigned long phys_addr = __pfn_to_phys(pfn);
-	pgd_t *pgd;
-	int err = 0;
-
-	BUG_ON(addr >= end);
-	pgd = pgd_offset_k(addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		err = remap_area_pmd(pgd, addr, next, phys_addr, type);
-		if (err)
-			break;
-		phys_addr += next - addr;
-	} while (pgd++, addr = next, addr != end);
-
-	return err;
-}
-
 int ioremap_page(unsigned long virt, unsigned long phys,
 		 const struct mem_type *mtype)
 {
-	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
+				  __pgprot(mtype->prot_pte));
 }
 EXPORT_SYMBOL(ioremap_page);
 
@@ -268,6 +201,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
 		return NULL;
 
+	/*
+	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
+	 */
+	if (WARN_ON(pfn_valid(pfn)))
+		return NULL;
+
 	type = get_mem_type(mtype);
 	if (!type)
 		return NULL;
@@ -294,7 +233,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 		err = remap_area_sections(addr, pfn, size, type);
 	} else
 #endif
-		err = remap_area_pages(addr, pfn, size, type);
+		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+					 __pgprot(type->prot_pte));
 
 	if (err) {
  		vunmap((void *)addr);
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 815d08eecbb..6630620380a 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -28,7 +28,5 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 #endif
 
-struct pglist_data;
-
 void __init bootmem_init(void);
-void reserve_node_zero(struct pglist_data *pgdat);
+void arm_mm_memblock_reserve(void);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f5abc51c5a0..4f5b39687df 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
 #include <linux/shm.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <asm/cputype.h>
 #include <asm/system.h>
 
@@ -80,6 +81,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	        start_addr = addr = TASK_UNMAPPED_BASE;
 	        mm->cached_hole_size = 0;
 	}
+	/* 8 bits of randomness in 20 address space bits */
+	if (current->flags & PF_RANDOMIZE)
+		addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
 	if (do_align)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 28589417118..6e1c4f6a2b3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -11,13 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
+#include <linux/memblock.h>
 #include <linux/sort.h>
 
 #include <asm/cputype.h>
-#include <asm/mach-types.h>
 #include <asm/sections.h>
 #include <asm/cachetype.h>
 #include <asm/setup.h>
@@ -258,6 +257,19 @@ static struct mem_type mem_types[] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_DTCM] = {
+		.prot_pte	= L_PTE_PRESENT | L_PTE_YOUNG |
+		                  L_PTE_DIRTY | L_PTE_WRITE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PMD_TYPE_SECT | PMD_SECT_XN,
+		.domain		= DOMAIN_KERNEL,
+	},
+	[MT_MEMORY_ITCM] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_IO,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -488,18 +500,28 @@ static void __init build_mem_type_table(void)
 
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
+static void __init *early_alloc(unsigned long sz)
 {
-	pte_t *pte;
+	void *ptr = __va(memblock_alloc(sz, sz));
+	memset(ptr, 0, sz);
+	return ptr;
+}
 
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+{
 	if (pmd_none(*pmd)) {
-		pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-		__pmd_populate(pmd, __pa(pte) | type->prot_l1);
+		pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t));
+		__pmd_populate(pmd, __pa(pte) | prot);
 	}
+	BUG_ON(pmd_bad(*pmd));
+	return pte_offset_kernel(pmd, addr);
+}
 
-	pte = pte_offset_kernel(pmd, addr);
+static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
+				  unsigned long end, unsigned long pfn,
+				  const struct mem_type *type)
+{
+	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 	do {
 		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 		pfn++;
@@ -668,7 +690,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
-static unsigned long __initdata vmalloc_reserve = SZ_128M;
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
 
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
@@ -677,7 +699,7 @@ static unsigned long __initdata vmalloc_reserve = SZ_128M;
  */
 static int __init early_vmalloc(char *arg)
 {
-	vmalloc_reserve = memparse(arg, NULL);
+	unsigned long vmalloc_reserve = memparse(arg, NULL);
 
 	if (vmalloc_reserve < SZ_16M) {
 		vmalloc_reserve = SZ_16M;
@@ -692,22 +714,26 @@ static int __init early_vmalloc(char *arg)
 			"vmalloc area is too big, limiting to %luMB\n",
 			vmalloc_reserve >> 20);
 	}
+
+	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 	return 0;
 }
 early_param("vmalloc", early_vmalloc);
 
-#define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
+phys_addr_t lowmem_end_addr;
 
 static void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
+	lowmem_end_addr = __pa(vmalloc_min - 1) + 1;
+
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
-		if (__va(bank->start) > VMALLOC_MIN ||
+		if (__va(bank->start) > vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET)
 			highmem = 1;
 
@@ -717,8 +743,8 @@ static void __init sanity_check_meminfo(void)
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
 		 */
-		if (__va(bank->start) < VMALLOC_MIN &&
-		    bank->size > VMALLOC_MIN - __va(bank->start)) {
+		if (__va(bank->start) < vmalloc_min &&
+		    bank->size > vmalloc_min - __va(bank->start)) {
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
@@ -727,12 +753,12 @@ static void __init sanity_check_meminfo(void)
 					(meminfo.nr_banks - i) * sizeof(*bank));
 				meminfo.nr_banks++;
 				i++;
-				bank[1].size -= VMALLOC_MIN - __va(bank->start);
-				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].size -= vmalloc_min - __va(bank->start);
+				bank[1].start = __pa(vmalloc_min - 1) + 1;
 				bank[1].highmem = highmem = 1;
 				j++;
 			}
-			bank->size = VMALLOC_MIN - __va(bank->start);
+			bank->size = vmalloc_min - __va(bank->start);
 		}
 #else
 		bank->highmem = highmem;
@@ -741,7 +767,7 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start) >= VMALLOC_MIN ||
+		if (__va(bank->start) >= vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
@@ -753,9 +779,9 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+		if (__va(bank->start + bank->size) > vmalloc_min ||
 		    __va(bank->start + bank->size) < __va(bank->start)) {
-			unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
 			       "to -%.8lx (vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1,
@@ -827,101 +853,23 @@ static inline void prepare_page_table(void)
 }
 
 /*
- * Reserve the various regions of node 0
+ * Reserve the special regions of memory
  */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
-	unsigned long res_size = 0;
-
-	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
 	/*
 	 * Reserve the page tables.  These are already in use,
 	 * and can only be in node 0.
 	 */
-	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
-			     PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT);
-
-	/*
-	 * Hmm... This should go elsewhere, but we really really need to
-	 * stop things allocating the low memory; ideally we need a better
-	 * implementation of GFP_DMA which does not assume that DMA-able
-	 * memory starts at zero.
-	 */
-	if (machine_is_integrator() || machine_is_cintegrator())
-		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen memory region at the start of main system memory.
-	 */
-	if (machine_is_edb7211())
-		res_size = 0x00020000;
-	if (machine_is_p720t())
-		res_size = 0x00014000;
-
-	/* H1940, RX3715 and RX1950 need to reserve this for suspend */
-
-	if (machine_is_h1940() || machine_is_rx3715()
-		|| machine_is_rx1950()) {
-		reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
-				BOOTMEM_DEFAULT);
-		reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
-				BOOTMEM_DEFAULT);
-	}
-
-	if (machine_is_palmld() || machine_is_palmtx()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_treo680() || machine_is_centro()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_palmt5())
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-
-	/*
-	 * U300 - This platform family can share physical memory
-	 * between two ARM cpus, one running Linux and the other
-	 * running another OS.
-	 */
-	if (machine_is_u300()) {
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
-	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-		res_size = 0x00100000;
-#endif
-#endif
-	}
+	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
 
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
 	 * precious DMA-able memory...
 	 */
-	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 #endif
-	if (res_size)
-		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size,
-				BOOTMEM_DEFAULT);
 }
 
 /*
@@ -940,7 +888,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1011,11 +959,8 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 static void __init kmap_init(void)
 {
 #ifdef CONFIG_HIGHMEM
-	pmd_t *pmd = pmd_off_k(PKMAP_BASE);
-	pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-	BUG_ON(!pmd_none(*pmd) || !pte);
-	__pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
-	pkmap_page_table = pte + PTRS_PER_PTE;
+	pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
+		PKMAP_BASE, _PAGE_KERNEL_TABLE);
 #endif
 }
 
@@ -1066,17 +1011,16 @@ void __init paging_init(struct machine_desc *mdesc)
 	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
-	bootmem_init();
 	devicemaps_init(mdesc);
 	kmap_init();
 
 	top_pmd = pmd_off_k(0xffff0000);
 
-	/*
-	 * allocate the zero page.  Note that this always succeeds and
-	 * returns a zeroed result.
-	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	/* allocate the zero page. */
+	zero_page = early_alloc(PAGE_SIZE);
+
+	bootmem_init();
+
 	empty_zero_page = virt_to_page(zero_page);
 	__flush_dcache_page(NULL, empty_zero_page);
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 33b327379f0..687d02319a4 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -6,8 +6,8 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
@@ -17,30 +17,14 @@
 
 #include "mm.h"
 
-/*
- * Reserve the various regions of node 0
- */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
 	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/*
 	 * Register the exception vector page.
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE,
-			BOOTMEM_DEFAULT);
+	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
 /*
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 72507c630ce..203a4e944d9 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -79,15 +79,11 @@ ENTRY(cpu_arm1020_proc_init)
  * cpu_arm1020_proc_fin()
  */
 ENTRY(cpu_arm1020_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020_reset(loc)
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index d2782980560..1a511e76590 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -79,15 +79,11 @@ ENTRY(cpu_arm1020e_proc_init)
  * cpu_arm1020e_proc_fin()
  */
 ENTRY(cpu_arm1020e_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020e_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020e_reset(loc)
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index ce13e4a827d..1ffa4eb9c34 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -68,15 +68,11 @@ ENTRY(cpu_arm1022_proc_init)
  * cpu_arm1022_proc_fin()
  */
 ENTRY(cpu_arm1022_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1022_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1022_reset(loc)
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 636672a29c6..5697c34b95b 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -68,15 +68,11 @@ ENTRY(cpu_arm1026_proc_init)
  * cpu_arm1026_proc_fin()
  */
 ENTRY(cpu_arm1026_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1026_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1026_reset(loc)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 795dc615f43..64e0b327c7c 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -184,8 +184,6 @@ ENTRY(cpu_arm7_proc_init)
 
 ENTRY(cpu_arm6_proc_fin)
 ENTRY(cpu_arm7_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	r0, #0x31			@ ....S..DP...M
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 		mov	pc, lr
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 0b62de24466..9d96824134f 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -54,15 +54,11 @@ ENTRY(cpu_arm720_proc_init)
 		mov	pc, lr
 
 ENTRY(cpu_arm720_proc_fin)
-		stmfd	sp!, {lr}
-		mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, ip
 		mrc	p15, 0, r0, c1, c0, 0
 		bic	r0, r0, #0x1000			@ ...i............
 		bic	r0, r0, #0x000e			@ ............wca.
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
-		ldmfd	sp!, {pc}
+		mov	pc, lr
 
 /*
  * Function: arm720_proc_do_idle(void)
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 01860cdeb2e..6c1a9ab059a 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -36,15 +36,11 @@ ENTRY(cpu_arm740_switch_mm)
  * cpu_arm740_proc_fin()
  */
 ENTRY(cpu_arm740_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
 	bic	r0, r0, #0x0000000c		@ w-buffer/cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mcr	p15, 0, r0, c7, c0, 0		@ invalidate cache
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm740_reset(loc)
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 1201b986382..6a850dbba22 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -36,8 +36,6 @@ ENTRY(cpu_arm7tdmi_switch_mm)
  * cpu_arm7tdmi_proc_fin()
  */
 ENTRY(cpu_arm7tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 8be81992645..86f80aa5621 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -69,19 +69,11 @@ ENTRY(cpu_arm920_proc_init)
  * cpu_arm920_proc_fin()
  */
 ENTRY(cpu_arm920_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm920_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm920_reset(loc)
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index c0ff8e4b107..f76ce9b6288 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -71,19 +71,11 @@ ENTRY(cpu_arm922_proc_init)
  * cpu_arm922_proc_fin()
  */
 ENTRY(cpu_arm922_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm922_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm922_reset(loc)
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 3c6cffe400f..657bd3f7c15 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -92,15 +92,11 @@ ENTRY(cpu_arm925_proc_init)
  * cpu_arm925_proc_fin()
  */
 ENTRY(cpu_arm925_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm925_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm925_reset(loc)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 75b707c9cce..73f1f3c6891 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -61,15 +61,11 @@ ENTRY(cpu_arm926_proc_init)
  * cpu_arm926_proc_fin()
  */
 ENTRY(cpu_arm926_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm926_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm926_reset(loc)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1af1657819e..fffb061a45a 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -37,15 +37,11 @@ ENTRY(cpu_arm940_switch_mm)
  * cpu_arm940_proc_fin()
  */
 ENTRY(cpu_arm940_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm940_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm940_reset(loc)
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 1664b6aaff7..249a6053760 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -44,15 +44,11 @@ ENTRY(cpu_arm946_switch_mm)
  * cpu_arm946_proc_fin()
  */
 ENTRY(cpu_arm946_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm946_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm946_reset(loc)
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 28545c29dbc..db475667fac 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -36,8 +36,6 @@ ENTRY(cpu_arm9tdmi_switch_mm)
  * cpu_arm9tdmi_proc_fin()
  */
 ENTRY(cpu_arm9tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08f5ac237ad..7803fdf7002 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -39,17 +39,13 @@ ENTRY(cpu_fa526_proc_init)
  * cpu_fa526_proc_fin()
  */
 ENTRY(cpu_fa526_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	fa_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	nop
 	nop
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_fa526_reset(loc)
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 53e63234384..b304d0104a4 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -75,11 +75,6 @@ ENTRY(cpu_feroceon_proc_init)
  * cpu_feroceon_proc_fin()
  */
 ENTRY(cpu_feroceon_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	feroceon_flush_kern_cache_all
-
 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
 	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r0, #0
@@ -91,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin)
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_feroceon_reset(loc)
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index caa31154e7d..5f6892fcc16 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -51,15 +51,11 @@ ENTRY(cpu_mohawk_proc_init)
  * cpu_mohawk_proc_fin()
  */
 ENTRY(cpu_mohawk_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	mohawk_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...iz...........
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_mohawk_reset(loc)
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 7b706b38990..a201eb04b5e 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -44,17 +44,13 @@ ENTRY(cpu_sa110_proc_init)
  * cpu_sa110_proc_fin()
  */
 ENTRY(cpu_sa110_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all	@ clean caches
-1:	mov	r0, #0
+	mov	r0, #0
 	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa110_reset(loc)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 5c47760c206..7ddc4805bf9 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -55,16 +55,12 @@ ENTRY(cpu_sa1100_proc_init)
  *  - Clean and turn off caches.
  */
 ENTRY(cpu_sa1100_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all
 	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa1100_reset(loc)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7a5337ed7d6..22aac851519 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -42,14 +42,11 @@ ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v6_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  *	cpu_v6_reset(loc)
@@ -239,7 +236,8 @@ __v6_proc_info:
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+	/* See also feat_v6_fixup() for HWCAP_TLS */
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
 	.long	cpu_v6_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
@@ -262,7 +260,7 @@ __pj4_v6_proc_info:
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_pj4_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7aaf88a3b7a..6a8506d99ee 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -45,14 +45,11 @@ ENTRY(cpu_v7_proc_init)
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v7_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -344,7 +341,7 @@ __v7_proc_info:
 	b	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index e5797f1c1db..361a51e4903 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -90,15 +90,11 @@ ENTRY(cpu_xsc3_proc_init)
  * cpu_xsc3_proc_fin()
  */
 ENTRY(cpu_xsc3_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xsc3_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xsc3_reset(loc)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 63037e2162f..14075979bcb 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -124,15 +124,11 @@ ENTRY(cpu_xscale_proc_init)
  * cpu_xscale_proc_fin()
  */
 ENTRY(cpu_xscale_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xscale_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xscale_reset(loc)
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
index 19e09bdb1b8..935993e1b1e 100644
--- a/arch/arm/mm/vmregion.c
+++ b/arch/arm/mm/vmregion.c
@@ -35,7 +35,8 @@
  */
 
 struct arm_vmregion *
-arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
+		   size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -58,7 +59,7 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
 			goto nospc;
 		if ((addr + size) <= c->vm_start)
 			goto found;
-		addr = c->vm_end;
+		addr = ALIGN(c->vm_end, align);
 		if (addr > end)
 			goto nospc;
 	}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index 6b2cdbdf3a8..15e9f044db9 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -21,7 +21,7 @@ struct arm_vmregion {
 	int			vm_active;
 };
 
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t);
 struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
 struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
 void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index ce31f316ac7..43f2b158237 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -359,7 +359,7 @@ static void __init iop3xx_atu_debug(void)
 	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
 	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
 
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
 }
 
 /* for platforms that might be host-bus-adapters */
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6c8a02ad98e..85d3e55ca4a 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -29,6 +29,11 @@
 #include <mach/time.h>
 
 /*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define IOP_MIN_RANGE 4
+
+/*
  * IOP clocksource (free-running timer 1).
  */
 static cycle_t iop_clocksource_read(struct clocksource *unused)
@@ -44,27 +49,6 @@ static struct clocksource iop_clocksource = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, hz);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-
-	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
-	       cs->name, cs->shift, cs->mult);
-}
-
 /*
  * IOP sched_clock() implementation via its clocksource.
  */
@@ -130,27 +114,6 @@ static struct clock_event_device iop_clockevent = {
 	.set_mode	= iop_set_mode,
 };
 
-static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) hz << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	ce->shift = shift;
-	ce->mult = (u32) temp;
-
-	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
-	       ce->name, ce->shift, ce->mult);
-}
-
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
@@ -190,7 +153,8 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	clockevents_calc_mult_shift(&iop_clockevent,
+				    tick_rate, IOP_MIN_RANGE);
 	iop_clockevent.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
 	iop_clockevent.min_delta_ns =
@@ -207,6 +171,7 @@ void __init iop_init_time(unsigned long tick_rate)
 	write_trr1(0xffffffff);
 	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
+				    IOP_MIN_RANGE);
 	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
new file mode 100644
index 00000000000..639c54a0799
--- /dev/null
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/hardware.h>
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n)	(n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n)	(n + 0x8000)
+#define UARTB_BASE_ADDR(n)	(n + 0x10000)
+
+#define BOARD_IO_ADDR(n)	(n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG		0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG	0x08
+/* status, interrupt */
+#define INTR_STATUS_REG	0x10
+#define INTR_MASK_REG		0x38
+#define INTR_RESET_REG		0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG	0x40
+#define MAGIC_NUMBER2_REG	0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG	0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG	0x58
+/* module reset register*/
+#define MODULE_RESET_REG	0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG	0x68
+
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_GPIO(irq)	((irq) - MXC_INTERNAL_IRQS)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET		(MXC_BOARD_IRQ_START + 0)
+#define EXPIO_INT_XUART_A	(MXC_BOARD_IRQ_START + 1)
+#define EXPIO_INT_XUART_B	(MXC_BOARD_IRQ_START + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_BOARD_IRQ_START + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_BOARD_IRQ_START + 4)
+
+static void __iomem *brd_io;
+static void expio_ack_irq(u32 irq);
+
+static struct resource smsc911x_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	} , {
+		.start = EXPIO_INT_ENET,
+		.end = EXPIO_INT_ENET,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	desc->chip->mask(irq);	/* irq = gpio irq number */
+
+	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_BOARD_IRQ_START;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		struct irq_desc *d;
+		if ((int_valid & 1) == 0)
+			continue;
+		d = irq_desc + expio_irq;
+		if (unlikely(!(d->handle_irq)))
+			pr_err("\nEXPIO irq: %d unhandled\n", expio_irq);
+		else
+			d->handle_irq(expio_irq, d);
+	}
+
+	desc->chip->ack(irq);
+	desc->chip->unmask(irq);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg |= (1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	expio_mask_irq(irq);
+}
+
+static void expio_unmask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+int __init mxc_expio_init(u32 base, u32 p_irq)
+{
+	int i;
+
+	brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+	if (brd_io == NULL)
+		return -ENOMEM;
+
+	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		pr_info("3-Stack Debug board not detected\n");
+		iounmap(brd_io);
+		brd_io = NULL;
+		return -ENODEV;
+	}
+
+	pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+		readw(brd_io + CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
+	gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0, brd_io + INTR_MASK_REG);
+	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+	set_irq_chained_handler(p_irq, mxc_expio_irq_handler);
+
+	/* Register Lan device on the debugboard */
+	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+	platform_device_register(&smsc_lan9217_device);
+
+	return 0;
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 7f7ad6f289b..0527e65318f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -1,5 +1,7 @@
 if ARCH_MXC
 
+source "arch/arm/plat-mxc/devices/Kconfig"
+
 menu "Freescale MXC Implementations"
 
 choice
@@ -8,15 +10,12 @@ choice
 
 config ARCH_MX1
 	bool "MX1-based"
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
+	select SOC_IMX1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
-	select CPU_ARM926T
-	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
@@ -25,6 +24,7 @@ config ARCH_MX25
 	select CPU_ARM926T
 	select ARCH_MXC_IOMUX_V3
 	select HAVE_FB_IMX
+	select ARCH_MXC_AUDMUX_V2
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
@@ -48,8 +48,7 @@ config ARCH_MX5
 
 endchoice
 
-source "arch/arm/mach-mx1/Kconfig"
-source "arch/arm/mach-mx2/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
@@ -81,6 +80,17 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
 config MXC_ULPI
 	bool
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 895bc3c5e0c..78d405ed861 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -8,8 +8,6 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 
-obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
@@ -17,7 +15,10 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index b62917ca3f9..1180bef7664 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 0c2cc5cd4d8..f9e7cdbd000 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -191,6 +187,7 @@ static int mxc_audmux_v2_init(void)
 {
 	int ret;
 
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31())
 		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
 
@@ -204,7 +201,19 @@ static int mxc_audmux_v2_init(void)
 		}
 		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
-
+#endif
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
+	}
+#endif
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 323ff8ccc87..2ed3ab173ad 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -52,13 +52,14 @@ static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
 		return;
-
-	__clk_disable(clk->parent);
-	__clk_disable(clk->secondary);
-
 	WARN_ON(!clk->usecount);
-	if (!(--clk->usecount) && clk->disable)
-		clk->disable(clk);
+
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		__clk_disable(clk->parent);
+		__clk_disable(clk->secondary);
+	}
 }
 
 static int __clk_enable(struct clk *clk)
@@ -66,12 +67,13 @@ static int __clk_enable(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	__clk_enable(clk->parent);
-	__clk_enable(clk->secondary);
-
-	if (clk->usecount++ == 0 && clk->enable)
-		clk->enable(clk);
+	if (clk->usecount++ == 0) {
+		__clk_enable(clk->parent);
+		__clk_enable(clk->secondary);
 
+		if (clk->enable)
+			clk->enable(clk);
+	}
 	return 0;
 }
 
@@ -160,17 +162,28 @@ EXPORT_SYMBOL(clk_set_rate);
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	int ret = -EINVAL;
+	struct clk *old;
 
 	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
 	    IS_ERR(parent) || clk->set_parent == NULL)
 		return ret;
 
+	if (clk->usecount)
+		clk_enable(parent);
+
 	mutex_lock(&clocks_mutex);
 	ret = clk->set_parent(clk, parent);
-	if (ret == 0)
+	if (ret == 0) {
+		old = clk->parent;
 		clk->parent = parent;
+	} else {
+		old = parent;
+	}
 	mutex_unlock(&clocks_mutex);
 
+	if (clk->usecount)
+		clk_disable(old);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 56f2fb5cc45..735776d8495 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 
@@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data)
 	return ret;
 }
 
+struct platform_device *__init imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		goto err;
+
+	if (res) {
+		ret = platform_device_add_resources(pdev, res, num_resources);
+		if (ret)
+			goto err;
+	}
+
+	if (data) {
+		ret = platform_device_add_data(pdev, data, size_data);
+		if (ret)
+			goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
+
+	return pdev;
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
new file mode 100644
index 00000000000..9ab784b776f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -0,0 +1,15 @@
+config IMX_HAVE_PLATFORM_FLEXCAN
+	select HAVE_CAN_FLEXCAN
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_I2C
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_UART
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_NAND
+	bool
+
+config IMX_HAVE_PLATFORM_SPI_IMX
+	bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
new file mode 100644
index 00000000000..347da5161f7
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -0,0 +1,8 @@
+ifdef CONFIG_CAN_FLEXCAN
+# the ifdef can be removed once the flexcan driver has been merged
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) +=  platform-flexcan.o
+endif
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
new file mode 100644
index 00000000000..5e97a01f14f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
new file mode 100644
index 00000000000..d0af9f7d8ae
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_i2c(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct imxi2c_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
new file mode 100644
index 00000000000..fa3dff1433e
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irqrx, resource_size_t irqtx,
+		resource_size_t irqrts,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irqrx,
+			.end = irqrx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irqtx,
+			.end = irqtx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irqrts,
+			.end = irqrx,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
new file mode 100644
index 00000000000..1c286418d12
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata,
+		resource_size_t iosize)
+{
+	static int id = 0;
+	
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata)
+{
+	return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
+}
+
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata)
+{
+	return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
new file mode 100644
index 00000000000..2831a6d3eb4
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_spi_imx(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct spi_imx_master *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 2a8646173c2..35a064ff02b 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -11,10 +11,6 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/platform_device.h>
@@ -73,7 +69,51 @@
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX25 */
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31()) {
 		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 71437c61cfd..57ec4a896a5 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -214,13 +214,16 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 	struct mxc_gpio_port *port =
 		container_of(chip, struct mxc_gpio_port, chip);
 	u32 l;
+	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	l = __raw_readl(port->base + GPIO_GDIR);
 	if (dir)
 		l |= 1 << offset;
 	else
 		l &= ~(1 << offset);
 	__raw_writel(l, port->base + GPIO_GDIR);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -229,9 +232,12 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 		container_of(chip, struct mxc_gpio_port, chip);
 	void __iomem *reg = port->base + GPIO_DR;
 	u32 l;
+	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
 	__raw_writel(l, reg);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -285,6 +291,8 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		port[i].chip.base = i * 32;
 		port[i].chip.ngpio = 32;
 
+		spin_lock_init(&port[i].lock);
+
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
@@ -292,6 +300,12 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
+			if (port[i].irq_high) {
+				/* setup handler for GPIO 16 to 31 */
+				set_irq_chained_handler(port[i].irq_high,
+						mx3_gpio_irq_handler);
+				set_irq_data(port[i].irq_high, &port[i]);
+			}
 		}
 	}
 
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
new file mode 100644
index 00000000000..a384fdd49c6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_3DS_DB_H__
+#define __ASM_ARCH_MXC_3DS_DB_H__
+
+extern int __init mxc_expio_init(u32 base, u32 p_irq);
+
+#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c133c9f..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f104c..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa29510..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d230327..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-				MXC_MAX_VIRTUAL_INTS)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-	MXC_CARD_SD2 = 0,
-	MXC_CARD_SD3,
-	MXC_CARD_MS,
-	MXC_CARD_SD1,
-	MXC_CARD_MIN = MXC_CARD_SD2,
-	MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50       0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-					0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-	((__raw_readw(PBC_VERSION_REG) & \
-	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-	== 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-	__raw_writew(           \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
-	__raw_writew(  \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-	__raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551d273..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcfa916..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933a233..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199591c..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a5024622..0df71bfefbb 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@ enum mx31lilly_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da036757..c1ad0ae807c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@ enum mx31lite_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 36ff3cedee1..de14543891c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -31,7 +31,7 @@ enum mx31moboard_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f9786ed2..6f371e35753 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside pcm038_init().
  *
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7af4b2..00000000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-
-/* NOR FLASH */
-#define QONG_NOR_SIZE		(128*1024*1024)
-
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 0b6e11eaeb8..25606409aab 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -23,8 +23,8 @@
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mx25.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX25_UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
new file mode 100644
index 00000000000..c5f68c58730
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data);
+
+#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE)
+#include <linux/can/platform/flexcan.h>
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata);
+#else
+/* the ifdef can be removed once the flexcan driver has been merged */
+struct flexcan_platform_data;
+static inline struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata)
+{
+	return NULL;
+}
+#endif
+
+#include <mach/i2c.h>
+struct platform_device *__init imx_add_imx_i2c(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct imxi2c_platform_data *pdata);
+
+#include <mach/imx-uart.h>
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irqrx, resource_size_t irqtx,
+		resource_size_t irqrts,
+		const struct imxuart_platform_data *pdata);
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct imxuart_platform_data *pdata);
+
+#include <mach/mxc_nand.h>
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata);
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata);
+
+#include <mach/spi.h>
+struct platform_device *__init imx_add_spi_imx(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct spi_imx_master *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index a1fd5830af4..634e3f4c454 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
  *
  * Based on board-pcm038.h which is :
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
@@ -19,22 +19,29 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#ifndef __MACH_EUKREA_BASEBOARDS_H__
+#define __MACH_EUKREA_BASEBOARDS_H__
 
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx27_init().
+ * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
+ * eukrea_cpuimx35_init() or eukrea_cpuimx51_init().
  *
  * This example here is for the development board. Refer
- * eukrea_mbimx27-baseboard.c
+ * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
+ * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
+ * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
+ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
+extern void eukrea_mbimx25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
+extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif
 
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
+#endif /* __MACH_EUKREA_BASEBOARDS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 894d2f87c85..661fbc60575 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -33,9 +33,11 @@
 struct mxc_gpio_port {
 	void __iomem *base;
 	int irq;
+	int irq_high;
 	int virtual_irq_start;
 	struct gpio_chip chip;
 	u32 both_edges;
+	spinlock_t lock;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index f39220d1b67..d7f52c91f82 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -252,6 +252,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
@@ -371,30 +372,41 @@
 #define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define KPP_CTL_ROW	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define KPP_CTL_COL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index ab0f95d953d..21bfa46785b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -27,8 +27,8 @@ typedef enum iomux_config {
 	IOMUX_CONFIG_ALT5,
 	IOMUX_CONFIG_ALT6,
 	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+	IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
 } iomux_pin_cfg_t;
 
 /* Pad control groupings */
@@ -38,6 +38,8 @@ typedef enum iomux_config {
 				PAD_CTL_SRE_FAST)
 #define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_SRE_FAST)
+#define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
 #define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
 				PAD_CTL_PKE | PAD_CTL_HYS)
@@ -46,289 +48,278 @@ typedef enum iomux_config {
 
 /*
  * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux-v3.h
  */
 
-/*
- * FIXME: This was converted using scripts from existing Freescale code to
- * this form used upstream. Need to verify the name format.
- */
-
-/*						PAD      MUX   ALT INPSE PATH PADCTRL */
-
-#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO_2_5	IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
-
-/* Babbage UART3 */
-#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
-
-#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
-/* REVISIT: Not sure of these values
-
-  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-*/
-#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
-
-/* Babbage UART1 */
-#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
-
-/* Babbage UART2 */
-#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
-
-#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK	IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO_1_27	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT	IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
-						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
-#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
-
-/* EIM */
-#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+/*							  PAD    MUX   ALT INPSE PATH PADCTRL */
+#define MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__GPIO_2_0              IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \
+							0x09b4, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D17__GPIO_2_1              IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__GPIO_2_2              IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__GPIO_2_3              IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \
+							0x09b0, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D20__GPIO_2_4              IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO_2_5		IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__GPIO_2_6              IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__GPIO_2_7              IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__UART3_CTS             IOMUX_PAD(0x410, 0x07c, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD             IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD             IOMUX_PAD(0x418, 0x084, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS             IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D28__EIM_D28               IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29               IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30               IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31               IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__GPIO_2_10             IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__GPIO_2_11             IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__GPIO_2_12             IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__GPIO_2_13             IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__GPIO_2_14             IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__GPIO_2_15             IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__GPIO_2_16             IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__GPIO_2_17             IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__GPIO_2_18             IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__GPIO_2_19             IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__GPIO_2_20             IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__GPIO_2_21             IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0               IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1               IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPIO_2_22             IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPIO_2_23             IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__GPIO_2_24              IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__GPIO_2_25             IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__GPIO_2_26             IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO_2_27             IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__GPIO_2_28             IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__GPIO_2_29             IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__GPIO_2_30             IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__GPIO_2_31           IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO_3_1              IOMUX_PAD(0x494, 0x0FC, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__GPIO_3_2              IOMUX_PAD(0x4A0, 0x100, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1             IOMUX_PAD(0x4D0, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__GPIO_3_3           IOMUX_PAD(0x4E4, 0x108, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__GPIO_3_4           IOMUX_PAD(0x4E8, 0x10C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__GPIO_3_5            IOMUX_PAD(0x4EC, 0x110, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__GPIO_3_6            IOMUX_PAD(0x4F0, 0x114, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__GPIO_3_7           IOMUX_PAD(0x4F4, 0x118, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__GPIO_3_8            IOMUX_PAD(0x4F8, 0x11C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPIO_3_9            IOMUX_PAD(0x4FC, 0x120, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPIO_3_10           IOMUX_PAD(0x500, 0x124, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__GPIO_3_11           IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__GPIO_3_12           IOMUX_PAD(0x514, 0x12C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__GPIO_3_16           IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__GPIO_3_17           IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__GPIO_3_18           IOMUX_PAD(0x520, 0x138, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__GPIO_3_19           IOMUX_PAD(0x524, 0x13C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__GPIO_3_20           IOMUX_PAD(0x528, 0x140, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__GPIO_3_21           IOMUX_PAD(0x52C, 0x144, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__GPIO_3_22           IOMUX_PAD(0x530, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__GPIO_3_23           IOMUX_PAD(0x534, 0x14C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24       IOMUX_PAD(0x538, 0x150, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__GPIO_3_25           IOMUX_PAD(0x53C, 0x154, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__GPIO_3_26           IOMUX_PAD(0x540, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__GPIO_3_27           IOMUX_PAD(0x544, 0x15C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__GPIO_3_28           IOMUX_PAD(0x548, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO_3_29           IOMUX_PAD(0x54C, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__GPIO_3_30           IOMUX_PAD(0x550, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__GPIO_3_31            IOMUX_PAD(0x554, 0x16C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__GPIO_4_0             IOMUX_PAD(0x558, 0x170, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__GPIO_4_1             IOMUX_PAD(0x55C, 0x174, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__GPIO_4_2             IOMUX_PAD(0x560, 0x178, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__GPIO_4_3             IOMUX_PAD(0x564, 0x17C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__GPIO_4_4             IOMUX_PAD(0x568, 0x180, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__GPIO_4_5             IOMUX_PAD(0x56C, 0x184, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__GPIO_4_6             IOMUX_PAD(0x570, 0x188, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__GPIO_4_7             IOMUX_PAD(0x574, 0x18C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__GPIO_4_8             IOMUX_PAD(0x578, 0x190, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__GPIO_3_12             IOMUX_PAD(0x57C, 0x194, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO_3_13             IOMUX_PAD(0x580, 0x198, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10             IOMUX_PAD(0x584, 0x19C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11             IOMUX_PAD(0x588, 0x1A0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12             IOMUX_PAD(0x58C, 0x1A4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13             IOMUX_PAD(0x590, 0x1A8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14             IOMUX_PAD(0x594, 0x1AC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15             IOMUX_PAD(0x598, 0x1B0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16             IOMUX_PAD(0x59C, 0x1B4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17             IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18             IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19             IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC         IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC         IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK       IOMUX_PAD(0x5B4, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK           IOMUX_PAD(0x5B8, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0           IOMUX_PAD(0x860, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__GPIO_4_9             IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO_4_10            IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D14__GPIO_4_11            IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D15__GPIO_4_12            IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D16__GPIO_4_11            IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D17__GPIO_4_12            IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__GPIO_4_11            IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__GPIO_4_12            IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__GPIO_4_13          IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__GPIO_4_14          IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15         IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__GPIO_4_16            IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__HSI2C_CLK		IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__GPIO_4_17            IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__HSI2C_DAT		IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18         IOMUX_PAD(0x5F0, 0x200, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19         IOMUX_PAD(0x5F4, 0x204, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO_4_20          IOMUX_PAD(0x5F8, 0x208, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__GPIO_4_21          IOMUX_PAD(0x5FC, 0x20C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__GPIO_4_22          IOMUX_PAD(0x600, 0x210, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__GPIO_4_23          IOMUX_PAD(0x604, 0x214, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO_4_24           IOMUX_PAD(0x608, 0x218, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO_4_25           IOMUX_PAD(0x60C, 0x21C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__GPIO_4_26           IOMUX_PAD(0x610, 0x220, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__GPIO_4_27          IOMUX_PAD(0x614, 0x224, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__UART1_RXD           IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD           IOMUX_PAD(0x61C, 0x22C, 0, 0x0,   0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS           IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS           IOMUX_PAD(0x624, 0x234, 0, 0x0,   0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__UART2_RXD           IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD           IOMUX_PAD(0x62C, 0x23C, 0, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__GPIO_1_22           IOMUX_PAD(0x630, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__GPIO_1_23           IOMUX_PAD(0x634, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__GPIO_1_24          IOMUX_PAD(0x638, 0x248, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0             IOMUX_PAD(0x63C, 0x24C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1             IOMUX_PAD(0x640, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2             IOMUX_PAD(0x644, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3             IOMUX_PAD(0x648, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0             IOMUX_PAD(0x64C, 0x25C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1             IOMUX_PAD(0x650, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2             IOMUX_PAD(0x654, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3             IOMUX_PAD(0x658, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4             IOMUX_PAD(0x65C, 0x26C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \
+							0x09b8, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5             IOMUX_PAD(0x660, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, 0,     0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \
+							0x09bc, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK           IOMUX_PAD(0x678, 0x278, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR           IOMUX_PAD(0x67C, 0x27C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP           IOMUX_PAD(0x680, 0x280, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO_1_27           IOMUX_PAD(0x680, 0x280, 2, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT           IOMUX_PAD(0x684, 0x284, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0       IOMUX_PAD(0x688, 0x288, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1       IOMUX_PAD(0x68C, 0x28C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2       IOMUX_PAD(0x690, 0x290, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3       IOMUX_PAD(0x694, 0x294, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4       IOMUX_PAD(0x698, 0x298, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5       IOMUX_PAD(0x69C, 0x29C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6       IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7       IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__GPIO_3_0            IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0         IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1         IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2         IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3         IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4         IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5         IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6         IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7         IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8         IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9         IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10       IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11       IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12       IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13       IOMUX_PAD(0x700, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14       IOMUX_PAD(0x704, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15       IOMUX_PAD(0x708, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16       IOMUX_PAD(0x70C, 0x30C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17       IOMUX_PAD(0x710, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18       IOMUX_PAD(0x714, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19       IOMUX_PAD(0x718, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20       IOMUX_PAD(0x71C, 0x31C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21       IOMUX_PAD(0x720, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22       IOMUX_PAD(0x724, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23       IOMUX_PAD(0x728, 0x328, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3             IOMUX_PAD(0x72C, 0x32C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2             IOMUX_PAD(0x734, 0x330, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1                 IOMUX_PAD(0x73C, 0x334, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2                 IOMUX_PAD(0x740, 0x338, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3                 IOMUX_PAD(0x744, 0x33C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4             IOMUX_PAD(0x748, 0x340, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2             IOMUX_PAD(0x74C, 0x344, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3             IOMUX_PAD(0x750, 0x348, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     IOMUX_PAD(0x754, 0x34C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4                 IOMUX_PAD(0x758, 0x350, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0         IOMUX_PAD(0x75C, 0x354, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1         IOMUX_PAD(0x760, 0x358, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2         IOMUX_PAD(0x764, 0x35C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3         IOMUX_PAD(0x768, 0x360, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4         IOMUX_PAD(0x76C, 0x364, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5         IOMUX_PAD(0x770, 0x368, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO_1_19          IOMUX_PAD(0x774, 0x36C, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO_1_29          IOMUX_PAD(0x778, 0x370, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO_1_30          IOMUX_PAD(0x77C, 0x374, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO_1_31          IOMUX_PAD(0x780, 0x378, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10       IOMUX_PAD(0x784, 0x37C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11       IOMUX_PAD(0x788, 0x380, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12       IOMUX_PAD(0x78C, 0x384, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD               IOMUX_PAD(0x79C, 0x394, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK               IOMUX_PAD(0x7A0, 0x398, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0           IOMUX_PAD(0x7A4, 0x39C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1           IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2           IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3           IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD               IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK               IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0           IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1           IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2           IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3           IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
+							0x9b8,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
+							0x9bc,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 0, 0x0,   1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 0, 0x0,   0, NO_PAD_CTRL)
 
 #endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 3887f3fe29d..15d59510f59 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __MACH_IOMUX_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index f2f73d31d5b..0880a4a1aed 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -89,6 +89,21 @@ struct pad_desc {
 #define PAD_CTL_SRE_FAST		(1 << 0)
 #define PAD_CTL_SRE_SLOW		(0 << 0)
 
+
+#define MX51_NUM_GPIO_PORT	4
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
 /*
  * setups a single pad in the iomuxer
  */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index c4b40c35a6a..564ec9dbc93 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -44,12 +44,12 @@
  */
 #define CONSISTENT_DMA_SIZE SZ_8M
 
-#elif defined(CONFIG_MX1_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
 /*
  * Increase size of DMA-consistent memory region.
  * This is required for i.MX camera driver to capture at least four VGA frames.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
index de2128dada5..29115f405af 100644
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ b/arch/arm/plat-mxc/include/mach/mmc.h
@@ -31,6 +31,9 @@ struct imxmmc_platform_data {
 
 	/* adjust slot voltage */
 	void (*setpower)(struct device *, unsigned int vdd);
+
+	/* enable card detect using DAT3 */
+	int dat3_card_detect;
 };
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 5eba7e6785d..641b2461823 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -91,24 +91,24 @@
 #define MX1_SIM_DATA_INT	16
 #define MX1_RTC_INT		17
 #define MX1_RTC_SAMINT		18
-#define MX1_UART2_MINT_PFERR	19
-#define MX1_UART2_MINT_RTS	20
-#define MX1_UART2_MINT_DTR	21
-#define MX1_UART2_MINT_UARTC	22
-#define MX1_UART2_MINT_TX	23
-#define MX1_UART2_MINT_RX	24
-#define MX1_UART1_MINT_PFERR	25
-#define MX1_UART1_MINT_RTS	26
-#define MX1_UART1_MINT_DTR	27
-#define MX1_UART1_MINT_UARTC	28
-#define MX1_UART1_MINT_TX	29
-#define MX1_UART1_MINT_RX	30
+#define MX1_INT_UART2PFERR	19
+#define MX1_INT_UART2RTS	20
+#define MX1_INT_UART2DTR	21
+#define MX1_INT_UART2UARTC	22
+#define MX1_INT_UART2TX		23
+#define MX1_INT_UART2RX		24
+#define MX1_INT_UART1PFERR	25
+#define MX1_INT_UART1RTS	26
+#define MX1_INT_UART1DTR	27
+#define MX1_INT_UART1UARTC	28
+#define MX1_INT_UART1TX		29
+#define MX1_INT_UART1RX		30
 #define MX1_VOICE_DAC_INT	31
 #define MX1_VOICE_ADC_INT	32
 #define MX1_PEN_DATA_INT	33
 #define MX1_PWM_INT		34
 #define MX1_SDHC_INT		35
-#define MX1_I2C_INT		39
+#define MX1_INT_I2C		39
 #define MX1_CSPI_INT		41
 #define MX1_SSI_TX_INT		42
 #define MX1_SSI_TX_ERR_INT	43
@@ -245,7 +245,7 @@
 #define PEN_DATA_INT MX1_PEN_DATA_INT
 #define PWM_INT MX1_PWM_INT
 #define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_I2C_INT
+#define I2C_INT MX1_INT_I2C
 #define CSPI_INT MX1_CSPI_INT
 #define SSI_TX_INT MX1_SSI_TX_INT
 #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 4eb6e334bda..4a6f800990f 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -11,6 +11,12 @@
 #define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
+#define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_CAN1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x88000)
+#define MX25_CAN2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x8c000)
+#define MX25_I2C2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xa4000)
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
 
 #define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
@@ -27,22 +33,48 @@
 	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
 	IMX_IO_ADDRESS(x, MX25_AVIC))
 
+#define MX25_AIPS1_IO_ADDRESS(x) \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
+#define MX25_AUDMUX_BASE_ADDR		0x43fb0000
+#define MX25_UART3_BASE_ADDR		0x5000c000
+#define MX25_UART4_BASE_ADDR		0x50008000
+#define MX25_UART5_BASE_ADDR		0x5002c000
 
+#define MX25_CSPI3_BASE_ADDR		0x50004000
+#define MX25_CSPI2_BASE_ADDR		0x50010000
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_SSI2_BASE_ADDR		0x50014000
+#define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
 #define MX25_LCDC_BASE_ADDR		0x53fbc000
+#define MX25_KPP_BASE_ADDR		0x43fa8000
+#define MX25_OTG_BASE_ADDR		0x53ff4000
+#define MX25_CSI_BASE_ADDR		0x53ff8000
 
-#define MX25_INT_DRYICE	25
-#define MX25_INT_FEC	57
-#define MX25_INT_NANDFC	33
-#define MX25_INT_LCDC	39
-
-#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
-#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
-#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
-#endif
+#define MX25_INT_CSPI3		0
+#define MX25_INT_I2C1		3
+#define MX25_INT_I2C2		4
+#define MX25_INT_UART4		5
+#define MX25_INT_I2C3		10
+#define MX25_INT_SSI2		11
+#define MX25_INT_SSI1		12
+#define MX25_INT_CSPI2		13
+#define MX25_INT_CSPI1		14
+#define MX25_INT_CSI		17
+#define MX25_INT_UART3		18
+#define MX25_INT_KPP		24
+#define MX25_INT_DRYICE		25
+#define MX25_INT_UART2		32
+#define MX25_INT_NANDFC		33
+#define MX25_INT_LCDC		39
+#define MX25_INT_UART5		40
+#define MX25_INT_CAN1		43
+#define MX25_INT_CAN2		44
+#define MX25_INT_UART1		45
+#define MX25_INT_FEC		57
 
 #endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index bae9cd75bee..a8ab2e02a8c 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -48,7 +48,7 @@
 #define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
 #define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
 #define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_I2C1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
 #define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
 #define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
 #define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
@@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_SDHC3		9
 #define MX27_INT_SDHC2		10
 #define MX27_INT_SDHC1		11
-#define MX27_INT_I2C		12
+#define MX27_INT_I2C1		12
 #define MX27_INT_SSI2		13
 #define MX27_INT_SSI1		14
 #define MX27_INT_CSPI2		15
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
new file mode 100644
index 00000000000..3c080a32dbf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -0,0 +1,46 @@
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_SWAP16		(1 << 0)
+#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
+#define MX2_CAMERA_CCIR			(1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
+#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
+#define MX2_CAMERA_INV_DATA		(1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+	unsigned long flags;
+	unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index fb90e119c2b..afee3ab9d62 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -23,7 +23,7 @@
 #define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
 #define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
 #define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
 #define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
 #define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
 #define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
@@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
 #define MX31_INT_MMC_SDHC1	9
-#define MX31_INT_I2C		10
+#define MX31_INT_I2C1		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
 #define MX31_INT_CSPI2		13
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 526a55842ae..af3038c12e3 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -18,7 +18,7 @@
 #define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
 #define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
 #define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
 #define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
 #define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
 #define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
@@ -60,6 +60,8 @@
 #define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
 #define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
 #define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_CAN1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe4000)
+#define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
 #define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
 #define MX35_OTG_BASE_ADDR		0x53ff4000
 
@@ -123,7 +125,7 @@
 #define MX35_INT_MMC_SDHC1	7
 #define MX35_INT_MMC_SDHC2	8
 #define MX35_INT_MMC_SDHC3	9
-#define MX35_INT_I2C		10
+#define MX35_INT_I2C1		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
 #define MX35_INT_CSPI2		13
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
index 36d7ff27b5e..f226ee3777e 100644
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _MX3_CAMERA_H_
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 5182b986b78..0ca3101ebf3 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __MACH_MXC91231_H__
 #define __MACH_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 5d2d21d414e..04c0d060d81 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -20,9 +20,13 @@
 #ifndef __ASM_ARCH_NAND_H
 #define __ASM_ARCH_NAND_H
 
+#include <linux/mtd/partitions.h>
+
 struct mxc_nand_platform_data {
-	int width;	/* data bus width in bytes */
-	int hw_ecc:1;	/* 0 if supress hardware ECC */
-	int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	unsigned int width;	/* data bus width in bytes */
+	unsigned int hw_ecc:1;	/* 0 if supress hardware ECC */
+	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	struct mtd_partition *parts;	/* partition table */
+	int nr_parts;			/* size of parts */
 };
 #endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index ef00199568d..4acd1143a9b 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 024416ed11c..2d9624697cc 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6d3d0fddc4..d9bd37e4667 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
 #define __ASM_ARCH_MXC_UNCOMPRESS_H__
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 44243a27843..ef6379c474b 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_VMALLOC_H__
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe57d8..7331f2ace5f 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	for (i = 0; i < 8; i++)
 		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
-	/* init architectures chained interrupt handler */
-	mxc_register_gpios();
-
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
 	init_FIQ();
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 97f42799fa5..925bce4607e 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 9b86d2a60d4..b3da9aad429 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase)
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
-	mxc_register_gpios();
-
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
 
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 5a6ef252c38..977c8f9a07a 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 
+#include <plat/pincfg.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 
@@ -46,28 +47,217 @@ struct nmk_gpio_chip {
 	u32 edge_falling;
 };
 
+static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, int gpio_mode)
+{
+	u32 bit = 1 << offset;
+	u32 afunc, bfunc;
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+}
+
+static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_slpm mode)
+{
+	u32 bit = 1 << offset;
+	u32 slpm;
+
+	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
+	if (mode == NMK_GPIO_SLPM_NOCHANGE)
+		slpm |= bit;
+	else
+		slpm &= ~bit;
+	writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
+}
+
+static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_pull pull)
+{
+	u32 bit = 1 << offset;
+	u32 pdis;
+
+	pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
+	if (pull == NMK_GPIO_PULL_NONE)
+		pdis |= bit;
+	else
+		pdis &= ~bit;
+	writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
+
+	if (pull == NMK_GPIO_PULL_UP)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else if (pull == NMK_GPIO_PULL_DOWN)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+}
+
+static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
+			     pin_cfg_t cfg)
+{
+	static const char *afnames[] = {
+		[NMK_GPIO_ALT_GPIO]	= "GPIO",
+		[NMK_GPIO_ALT_A]	= "A",
+		[NMK_GPIO_ALT_B]	= "B",
+		[NMK_GPIO_ALT_C]	= "C"
+	};
+	static const char *pullnames[] = {
+		[NMK_GPIO_PULL_NONE]	= "none",
+		[NMK_GPIO_PULL_UP]	= "up",
+		[NMK_GPIO_PULL_DOWN]	= "down",
+		[3] /* illegal */	= "??"
+	};
+	static const char *slpmnames[] = {
+		[NMK_GPIO_SLPM_INPUT]		= "input",
+		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change",
+	};
+
+	int pin = PIN_NUM(cfg);
+	int pull = PIN_PULL(cfg);
+	int af = PIN_ALT(cfg);
+	int slpm = PIN_SLPM(cfg);
+
+	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n",
+		pin, afnames[af], pullnames[pull], slpmnames[slpm]);
+
+	__nmk_gpio_make_input(nmk_chip, offset);
+	__nmk_gpio_set_pull(nmk_chip, offset, pull);
+	__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
+	__nmk_gpio_set_mode(nmk_chip, offset, af);
+}
+
+/**
+ * nmk_config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration.  The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects.  The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+int nmk_config_pin(pin_cfg_t cfg)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	int gpio = PIN_NUM(cfg);
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_config_pin);
+
+/**
+ * nmk_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using nmk_config_pin().  Refer to that function for
+ * further information.
+ */
+int nmk_config_pins(pin_cfg_t *cfgs, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		int ret = nmk_config_pin(cfgs[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins);
+
+/**
+ * nmk_gpio_set_slpm() - configure the sleep mode of a pin
+ * @gpio: pin number
+ * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
+ *
+ * Sets the sleep mode of a pin.  If @mode is NMK_GPIO_SLPM_INPUT, the pin is
+ * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
+ * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
+ * configured even when in sleep and deep sleep.
+ */
+int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+/**
+ * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin.  This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input.  Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
 /* Mode functions */
 int nmk_gpio_set_mode(int gpio, int gpio_mode)
 {
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
-	u32 afunc, bfunc, bit;
 
 	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
 	if (!nmk_chip)
 		return -EINVAL;
 
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
-	if (gpio_mode & NMK_GPIO_ALT_A)
-		afunc |= bit;
-	if (gpio_mode & NMK_GPIO_ALT_B)
-		bfunc |= bit;
-	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
-	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
 	return 0;
@@ -111,32 +301,41 @@ static void nmk_gpio_irq_ack(unsigned int irq)
 	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
 }
 
+enum nmk_gpio_irq_type {
+	NORMAL,
+	WAKE,
+};
+
 static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
-				  int gpio, bool enable)
+				  int gpio, enum nmk_gpio_irq_type which,
+				  bool enable)
 {
+	u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
+	u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
 	u32 bitmask = nmk_gpio_get_bitmask(gpio);
 	u32 reg;
 
 	/* we must individually set/clear the two edges */
 	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+		reg = readl(nmk_chip->addr + rimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+		writel(reg, nmk_chip->addr + rimsc);
 	}
 	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+		reg = readl(nmk_chip->addr + fimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+		writel(reg, nmk_chip->addr + fimsc);
 	}
 }
 
-static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which,
+			       bool enable)
 {
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
@@ -147,26 +346,35 @@ static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
 	nmk_chip = get_irq_chip_data(irq);
 	bitmask = nmk_gpio_get_bitmask(gpio);
 	if (!nmk_chip)
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+	__nmk_gpio_irq_modify(nmk_chip, gpio, which, enable);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
 }
 
 static void nmk_gpio_irq_mask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, false);
-};
+	nmk_gpio_irq_modify(irq, NORMAL, false);
+}
 
 static void nmk_gpio_irq_unmask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, true);
+	nmk_gpio_irq_modify(irq, NORMAL, true);
+}
+
+static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	return nmk_gpio_irq_modify(irq, WAKE, on);
 }
 
 static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 {
-	bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+	struct irq_desc *desc = irq_to_desc(irq);
+	bool enabled = !(desc->status & IRQ_DISABLED);
+	bool wake = desc->wake_depth;
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
@@ -186,7 +394,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, false);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
 
 	nmk_chip->edge_rising &= ~bitmask;
 	if (type & IRQ_TYPE_EDGE_RISING)
@@ -197,7 +408,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 		nmk_chip->edge_falling |= bitmask;
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, true);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
 
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
@@ -210,6 +424,7 @@ static struct irq_chip nmk_gpio_irq_chip = {
 	.mask		= nmk_gpio_irq_mask,
 	.unmask		= nmk_gpio_irq_unmask,
 	.set_type	= nmk_gpio_irq_set_type,
+	.set_wake	= nmk_gpio_irq_set_wake,
 };
 
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -266,16 +481,6 @@ static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	return 0;
-}
-
 static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct nmk_gpio_chip *nmk_chip =
@@ -298,12 +503,33 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
 		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
 }
 
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	nmk_gpio_set_output(chip, offset, val);
+
+	return 0;
+}
+
+static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
+}
+
 /* This structure is replicated for each GPIO block allocated at probe time */
 static struct gpio_chip nmk_gpio_template = {
 	.direction_input	= nmk_gpio_make_input,
 	.get			= nmk_gpio_get_input,
 	.direction_output	= nmk_gpio_make_output,
 	.set			= nmk_gpio_set_output,
+	.to_irq			= nmk_gpio_to_irq,
 	.ngpio			= NMK_GPIO_PER_CHIP,
 	.can_sleep		= 0,
 };
@@ -393,30 +619,12 @@ out:
 	return ret;
 }
 
-static int __exit nmk_gpio_remove(struct platform_device *dev)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct resource *res;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
-	nmk_chip = platform_get_drvdata(dev);
-	gpiochip_remove(&nmk_chip->chip);
-	clk_disable(nmk_chip->clk);
-	clk_put(nmk_chip->clk);
-	kfree(nmk_chip);
-	release_mem_region(res->start, resource_size(res));
-	return 0;
-}
-
-
 static struct platform_driver nmk_gpio_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "gpio",
 		},
 	.probe = nmk_gpio_probe,
-	.remove = __exit_p(nmk_gpio_remove),
 	.suspend = NULL, /* to be done */
 	.resume = NULL,
 };
@@ -426,7 +634,7 @@ static int __init nmk_gpio_init(void)
 	return platform_driver_register(&nmk_gpio_driver);
 }
 
-arch_initcall(nmk_gpio_init);
+core_initcall(nmk_gpio_init);
 
 MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
 MODULE_DESCRIPTION("Nomadik GPIO Driver");
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 4200811249c..aba355101f4 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -55,6 +55,21 @@
 #define NMK_GPIO_ALT_B	2
 #define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
 
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
 extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
 extern int nmk_gpio_get_mode(int gpio);
 
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 42c907258b1..65704a3d424 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,6 +1,12 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
 /* should be set by the platform code */
 extern void __iomem *mtu_base;
 
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
new file mode 100644
index 00000000000..7eed11c1038
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ *
+ * Based on arch/arm/mach-pxa/include/mach/mfp.h:
+ *   Copyright (C) 2007 Marvell International Ltd.
+ *   eric miao <eric.miao@marvell.com>
+ */
+
+#ifndef __PLAT_PINCFG_H
+#define __PLAT_PINCFG_H
+
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *	bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *	bit  9..10 - Alternate Function Selection
+ *	bit 11..12 - Pull up/down state
+ *	bit     13 - Sleep mode behaviour
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *		     pull up/down = disabled
+ *		     sleep mode = input
+ *
+ * PIN_CFG	   - default config with alternate function
+ * PIN_CFG_PULL	   - default config with alternate function and pull up/down
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK		0x1ff
+#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT		9
+#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT		11
+#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT		13
+#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_INPUT		(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+
+#define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
+
+#define PIN_CFG(num, alt)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_PULL(num, alt, pull)	\
+	((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
+
+extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+
+#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 0ff3798769a..ea3ca86c528 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -13,7 +13,9 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/err.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
@@ -40,7 +42,6 @@ static struct clocksource nmdk_clksrc = {
 	.rating		= 200,
 	.read		= nmdk_read_timer_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -80,6 +81,12 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 		/* disable irq */
 		writel(0, mtu_base + MTU_IMSC);
+		/* disable timer */
+		cr = readl(mtu_base + MTU_CR(1));
+		cr &= ~MTU_CRn_ENA;
+		writel(cr, mtu_base + MTU_CR(1));
+		/* load some high default value */
+		writel(0xffffffff, mtu_base + MTU_LR(1));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -96,7 +103,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
@@ -124,19 +130,32 @@ static struct irqaction nmdk_timer_irq = {
 void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
-	u32 cr = MTU_CRn_32BITS;;
+	struct clk *clk0;
+	struct clk *clk1;
+	u32 cr;
+
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
+
+	clk1 = clk_get_sys("mtu1", NULL);
+	BUG_ON(IS_ERR(clk1));
+
+	clk_enable(clk0);
+	clk_enable(clk1);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
 	 * use a divide-by-16 counter if it's more than 16MHz
 	 */
-	rate = CLOCK_TICK_RATE;
+	cr = MTU_CRn_32BITS;;
+	rate = clk_get_rate(clk0);
 	if (rate > 16 << 20) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
 		cr |= MTU_CRn_PRESCALE_1;
 	}
+	clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
 
 	/* Timer 0 is the free running clocksource */
 	writel(cr, mtu_base + MTU_CR(0));
@@ -144,7 +163,6 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
 	/* Now the scheduling clock is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
@@ -153,8 +171,18 @@ void __init nmdk_timer_init(void)
 		       nmdk_clksrc.name);
 
 	/* Timer 1 is used for events, fix according to rate */
+	cr = MTU_CRn_32BITS;
+	rate = clk_get_rate(clk1);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
+	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
+
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+
 	nmdk_clkevt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
 	nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 219c01e82bc..ebed82699eb 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -22,6 +22,7 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -35,6 +36,7 @@
 #include <plat/mux.h>
 #include <plat/fpga.h>
 #include <plat/serial.h>
+#include <plat/vram.h>
 
 #include <plat/clock.h>
 
@@ -81,6 +83,12 @@ const void *omap_get_var_config(u16 tag, size_t *len)
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
+void __init omap_reserve(void)
+{
+	omapfb_reserve_sdram_memblock();
+	omap_vram_reserve_sdram_memblock();
+}
+
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index c64875f11fa..44bafdab2dc 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -541,11 +541,11 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index d3eea4f4753..0054b9501a5 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/io.h>
 #include <linux/omapfb.h>
 
@@ -171,49 +171,78 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
 	return 0;
 }
 
+static int valid_sdram(unsigned long addr, unsigned long size)
+{
+	struct memblock_property res;
+
+	res.base = addr;
+	res.size = size;
+	return !memblock_find(&res) && res.base == addr && res.size == size;
+}
+
+static int reserve_sdram(unsigned long addr, unsigned long size)
+{
+	if (memblock_is_region_reserved(addr, size))
+		return -EBUSY;
+	if (memblock_reserve(addr, size))
+		return -ENOMEM;
+	return 0;
+}
+
 /*
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void __init omapfb_reserve_sdram(void)
+void __init omapfb_reserve_sdram_memblock(void)
 {
-	struct bootmem_data	*bdata;
-	unsigned long		sdram_start, sdram_size;
-	unsigned long		reserved;
-	int			i;
+	unsigned long reserved = 0;
+	int i;
 
 	if (config_invalid)
 		return;
 
-	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-	reserved = 0;
 	for (i = 0; ; i++) {
-		struct omapfb_mem_region	rg;
+		struct omapfb_mem_region rg;
 
 		if (get_fbmem_region(i, &rg) < 0)
 			break;
+
 		if (i == OMAPFB_PLANE_NUM) {
-			printk(KERN_ERR
-				"Extraneous FB mem configuration entries\n");
+			pr_err("Extraneous FB mem configuration entries\n");
 			config_invalid = 1;
 			return;
 		}
+
 		/* Check if it's our memory type. */
-		if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
-				          sdram_start, sdram_size) < 0 ||
-		    (rg.type != OMAPFB_MEMTYPE_SDRAM))
+		if (rg.type != OMAPFB_MEMTYPE_SDRAM)
 			continue;
-		BUG_ON(omapfb_config.mem_desc.region[i].size);
-		if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+
+		/* Check if the region falls within SDRAM */
+		if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
+			continue;
+
+		if (rg.size == 0) {
+			pr_err("Zero size for FB region %d\n", i);
 			config_invalid = 1;
 			return;
 		}
+
 		if (rg.paddr) {
-			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
+			if (reserve_sdram(rg.paddr, rg.size)) {
+				pr_err("Trying to use reserved memory for FB region %d\n",
+					i);
+				config_invalid = 1;
+				return;
+			}
 			reserved += rg.size;
 		}
+
+		if (omapfb_config.mem_desc.region[i].size) {
+			pr_err("FB region %d already set\n", i);
+			config_invalid = 1;
+			return;
+		}
+
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}
@@ -359,7 +388,10 @@ static inline int omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
@@ -375,7 +407,10 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data)
 {
 }
 
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 393e9219a5b..9b7e3545f32 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -673,6 +673,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
 }
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index d265018f5e6..5e4afbee0fd 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -34,6 +34,8 @@ struct sys_timer;
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
+extern void omap_reserve(void);
+
 /*
  * IO bases for various OMAP processors
  * Except the tap base, rest all the io bases
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index edd4987758a..0aa4ecd12c7 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -38,7 +38,7 @@ extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
 extern void omap_vram_set_sdram_vram(u32 size, u32 start);
 extern void omap_vram_set_sram_vram(u32 size, u32 start);
 
-extern void omap_vram_reserve_sdram(void);
+extern void omap_vram_reserve_sdram_memblock(void);
 extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
@@ -48,7 +48,7 @@ extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
 static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
 
-static inline void omap_vram_reserve_sdram(void) { }
+static inline void omap_vram_reserve_sdram_memblock(void) { }
 static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index e43983ba59c..8ce0de247c7 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -140,8 +140,10 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 54c84a492a0..779553a1595 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -13,6 +13,7 @@
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <linux/delay.h>
 
 /*
  * PCIe unit register offsets.
@@ -46,6 +47,8 @@
 #define  PCIE_STAT_BUS_OFFS		8
 #define  PCIE_STAT_BUS_MASK		0xff
 #define  PCIE_STAT_LINK_DOWN		1
+#define PCIE_DEBUG_CTRL         0x1a60
+#define  PCIE_DEBUG_SOFT_RESET		(1<<20)
 
 
 u32 __init orion_pcie_dev_id(void __iomem *base)
@@ -85,6 +88,32 @@ void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr)
 	writel(stat, base + PCIE_STAT_OFF);
 }
 
+void __init orion_pcie_reset(void __iomem *base)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * MV-S104860-U0, Rev. C:
+	 * PCI Express Unit Soft Reset
+	 * When set, generates an internal reset in the PCI Express unit.
+	 * This bit should be cleared after the link is re-established.
+	 */
+	reg = readl(base + PCIE_DEBUG_CTRL);
+	reg |= PCIE_DEBUG_SOFT_RESET;
+	writel(reg, base + PCIE_DEBUG_CTRL);
+
+	for (i = 0; i < 20; i++) {
+		mdelay(10);
+
+		if (orion_pcie_link_up(base))
+			break;
+	}
+
+	reg &= ~(PCIE_DEBUG_SOFT_RESET);
+	writel(reg, base + PCIE_DEBUG_CTRL);
+}
+
 /*
  * Setup PCIE BARs and Address Decode Wins:
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
@@ -153,6 +182,11 @@ void __init orion_pcie_setup(void __iomem *base,
 	u32 mask;
 
 	/*
+	 * soft reset PCIe unit
+	 */
+	orion_pcie_reset(base);
+
+	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
 	orion_pcie_setup_wins(base, dram);
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 6187edfbcb7..a17cc0c6a6b 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,8 +2,9 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o pmu.o
+obj-y	:= dma.o
 
+obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index e56c8075df9..f36cd332702 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -71,7 +71,7 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_EXTINT_RISEEDGE;
+		newvalue = S5P_EXTINT_FALLEDGE;
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
new file mode 100644
index 00000000000..3a70c125fe5
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -0,0 +1,43 @@
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS	8
+#define SAMSUNG_MAX_COLS	8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+	const struct matrix_keymap_data	*keymap_data;
+	unsigned int rows;
+	unsigned int cols;
+	bool no_autorepeat;
+	bool wakeup;
+
+	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 13f9fb20900..016674fa20d 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -166,8 +166,10 @@ static inline void s3c6410_default_sdhci2(void) { }
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
@@ -239,7 +241,7 @@ static inline void s5pv210_default_sdhci0(void)
 	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 }
 #else
-static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci0(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC */
 
 #ifdef CONFIG_S3C_DEV_HSMMC1
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 1670734b7e5..37fa593884e 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -17,8 +17,8 @@
 		.macro	addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, =SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, =VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index a1025d38f38..ab211652e4c 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -58,6 +58,11 @@
 
 #define INT_STATUS		0x1
 
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define SPEAR_MIN_RANGE 4
+
 static __iomem void *gpt_base;
 static struct clk *gpt_clk;
 
@@ -66,44 +71,6 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
-/*
- * Following clocksource_set_clock and clockevent_set_clock picked
- * from arch/mips/kernel/time.c
- */
-
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, clock);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-}
-
-void __init clockevent_set_clock(struct clock_event_device *cd,
-	unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) clock << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cd->shift = shift;
-	cd->mult = (u32) temp;
-}
-
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
@@ -138,7 +105,7 @@ static void spear_clocksource_init(void)
 	val |= CTRL_ENABLE ;
 	writew(val, gpt_base + CR(CLKSRC));
 
-	clocksource_set_clock(&clksrc, tick_rate);
+	clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
 
 	/* register the clocksource */
 	clocksource_register(&clksrc);
@@ -233,7 +200,7 @@ static void __init spear_clockevent_init(void)
 	tick_rate = clk_get_rate(gpt_clk);
 	tick_rate >>= CTRL_PRESCALER16;
 
-	clockevent_set_clock(&clkevt, tick_rate);
+	clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
 
 	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
 			&clkevt);
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 9b1a66816aa..5cf88e8427b 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -2,3 +2,7 @@ obj-y	:= clock.o
 obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
 obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
 obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifeq ($(CONFIG_LEDS_CLASS),y)
+obj-$(CONFIG_ARCH_REALVIEW) += leds.o
+obj-$(CONFIG_ARCH_VERSATILE) += leds.o
+endif
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
new file mode 100644
index 00000000000..3169fa555ea
--- /dev/null
+++ b/arch/arm/plat-versatile/leds.c
@@ -0,0 +1,103 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+#endif
+
+struct versatile_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} versatile_leds[] = {
+	{ "versatile:0", "heartbeat", },
+	{ "versatile:1", "mmc0", },
+	{ "versatile:2", },
+	{ "versatile:3", },
+	{ "versatile:4", },
+	{ "versatile:5", },
+	{ "versatile:6", },
+	{ "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+	writel(reg, LEDREG);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init versatile_leds_init(void)
+{
+	int i;
+
+	/* All ON */
+	writel(0xff, LEDREG);
+	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+		struct versatile_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = versatile_leds[i].name;
+		led->cdev.brightness_set = versatile_led_set;
+		led->cdev.brightness_get = versatile_led_get;
+		led->cdev.default_trigger = versatile_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(versatile_leds_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8f10d24ae62..48cbdcb6bbd 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat May 1 10:36:42 2010
+# Last update: Mon Jul 12 21:10:14 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1994,7 +1994,7 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
 sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
 hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
 sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
@@ -2609,7 +2609,7 @@ fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-sheevad			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_SHEEVAD		SHEEVAD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2804,3 +2804,149 @@ teton_bga		MACH_TETON_BGA		TETON_BGA		2816
 snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
 tam3517			MACH_TAM3517		TAM3517			2818
 pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
+fuji			MACH_FUJI		FUJI			2875
+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
+em1sy			MACH_EM1SY		EM1SY			2877
+m502			MACH_M502		M502			2878
+matrix518		MACH_MATRIX518		MATRIX518		2879
+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
+spear1310		MACH_SPEAR1310		SPEAR1310		2881
+bv07			MACH_BV07		BV07			2882
+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
+devixp			MACH_DEVIXP		DEVIXP			2885
+miccpt			MACH_MICCPT		MICCPT			2886
+mic256			MACH_MIC256		MIC256			2887
+as1167			MACH_AS1167		AS1167			2888
+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
+u5500			MACH_U5500		U5500			2890
+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
+mecha			MACH_MECHA		MECHA			2892
+bubba3			MACH_BUBBA3		BUBBA3			2893
+pupitre			MACH_PUPITRE		PUPITRE			2894
+tegra_harmony		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
+simplenet		MACH_SIMPLENET		SIMPLENET		2898
+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
+pec_tc			MACH_PEC_TC		PEC_TC			2900
+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
+blueshark		MACH_BLUESHARK		BLUESHARK		2907
+e10			MACH_E10		E10			2908
+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
+pov15hd			MACH_POV15HD		POV15HD			2910
+stella			MACH_STELLA		STELLA			2911
+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
+netwalker		MACH_NETWALKER		NETWALKER		2914
+acsx106			MACH_ACSX106		ACSX106			2915
+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
+nsb3ast			MACH_NSB3AST		NSB3AST			2917
+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
+af4000			MACH_AF4000		AF4000			2919
+ark9431			MACH_ARK9431		ARK9431			2920
+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
+oratisaes		MACH_ORATISAES		ORATISAES		2924
+smdkv310		MACH_SMDKV310		SMDKV310		2925
+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
+ventana			MACH_VENTANA		VENTANA			2927
+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
+mimas			MACH_MIMAS		MIMAS			2930
+titan			MACH_TITAN		TITAN			2931
+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
+es2440			MACH_ES2440		ES2440			2933
+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
+jigen301		MACH_JIGEN		JIGEN			2937
+smdk6450		MACH_SMDK6450		SMDK6450		2938
+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
+ns2416			MACH_NS2416		NS2416			2940
+rpc353			MACH_RPC353		RPC353			2941
+tq6410			MACH_TQ6410		TQ6410			2942
+sky6410			MACH_SKY6410		SKY6410			2943
+dynasty			MACH_DYNASTY		DYNASTY			2944
+vivo			MACH_VIVO		VIVO			2945
+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
+basi			MACH_BASI		BASI			2948
+tn200			MACH_TN200		TN200			2949
+c2mmi			MACH_C2MMI		C2MMI			2950
+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
+tube			MACH_TUBE		TUBE			2953
+messina			MACH_MESSINA		MESSINA			2954
+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
+cetus9263		MACH_CETUS9263		CETUS9263		2956
+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
+vmx25			MACH_VMX25		VMX25			2958
+vmx51			MACH_VMX51		VMX51			2959
+abacus			MACH_ABACUS		ABACUS			2960
+cm4745			MACH_CM4745		CM4745			2961
+oratislink		MACH_ORATISLINK		ORATISLINK		2962
+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
+netviz			MACH_NETVIZ		NETVIZ			2964
+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 66dc2d03b7f..d66cead97d2 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -277,7 +277,7 @@ ENTRY(vfp_put_double)
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
 	mov	pc, lr
 	.org	1b + 8
 	.endr
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 315a540c7ce..8063a322c79 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 
+#include <asm/cputype.h>
 #include <asm/thread_notify.h>
 #include <asm/vfp.h>
 
@@ -549,10 +550,13 @@ static int __init vfp_init(void)
 		/*
 		 * Check for the presence of the Advanced SIMD
 		 * load/store instructions, integer and single
-		 * precision floating point operations.
+		 * precision floating point operations. Only check
+		 * for NEON if the hardware has the MVFR registers.
 		 */
-		if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
-			elf_hwcap |= HWCAP_NEON;
+		if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
+			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+				elf_hwcap |= HWCAP_NEON;
+		}
 #endif
 	}
 	return 0;
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a4502..e6ac0b66107 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -54,6 +54,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c7f25bb1d06..61740201b31 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -5,6 +5,7 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
+#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -35,6 +36,7 @@ struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index 77630df9434..884275629ef 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
 #include <linux/bcd.h>
 #include <linux/capability.h>
 
@@ -238,9 +239,7 @@ static unsigned char days_in_mo[] =
 
 /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
 
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg) 
+static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 
@@ -354,6 +353,17 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	}
 }
 
+static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = rtc_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static void
 print_rtc_status(void)
 {
@@ -375,8 +385,8 @@ print_rtc_status(void)
 /* The various file operations we support. */
 
 static const struct file_operations rtc_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	rtc_ioctl,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = rtc_unlocked_ioctl,
 }; 
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 1e90c1a9c84..7dcb1f85f42 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -53,7 +54,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -62,7 +63,7 @@ static int voltage_low;
 
 static const struct file_operations pcf8563_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = pcf8563_ioctl,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -212,8 +213,7 @@ pcf8563_exit(void)
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -339,6 +339,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 1a61efc1398..a0c0df8be9c 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -17,8 +17,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
-#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
 /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
  * global just so that the kernel gdb can use it.
@@ -116,12 +116,12 @@ static unsigned int startup_crisv10_irq(unsigned int irq)
 
 static void enable_crisv10_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv10_unmask_irq(irq);
 }
 
 static void disable_crisv10_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv10_mask_irq(irq);
 }
 
 static void ack_crisv10_irq(unsigned int irq)
diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c
index e5fb44f505c..49f5b8ca5b4 100644
--- a/arch/cris/arch-v10/lib/dmacopy.c
+++ b/arch/cris/arch-v10/lib/dmacopy.c
@@ -1,5 +1,4 @@
-/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $ 
- *
+/*
  * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
  */
 
@@ -13,11 +12,11 @@ void *dma_memcpy(void *pdst,
 		 unsigned int pn)
 {
 	static etrax_dma_descr indma, outdma;
-	
-	D(printk("dma_memcpy %d bytes... ", pn));
+
+	D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
 
 #if 0
-	*R_GEN_CONFIG = genconfig_shadow = 
+	*R_GEN_CONFIG = genconfig_shadow =
 		(genconfig_shadow & ~0x3c0000) |
 		IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
 		IO_STATE(R_GEN_CONFIG, dma7, intdma6);
@@ -32,11 +31,11 @@ void *dma_memcpy(void *pdst,
 	*R_DMA_CH7_FIRST = &outdma;
 	*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
 	*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
-	
-	while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
 
-	D(printk("done\n"));
+	while (*R_DMA_CH7_CMD == 1)
+		/* wait for completion */;
 
+	D(printk(KERN_DEBUG "done\n"));
 }
 
 
diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S
index 56905aaa7b6..c09f19f478a 100644
--- a/arch/cris/arch-v10/lib/hw_settings.S
+++ b/arch/cris/arch-v10/lib/hw_settings.S
@@ -1,13 +1,11 @@
 /*
- * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- * 
  * This table is used by some tools to extract hardware parameters.
  * The table should be included in the kernel and the decompressor.
  * Don't forget to update the tools if you change this table.
  *
  * Copyright (C) 2001 Axis Communications AB
  *
- * Authors:  Mikael Starvik (starvik@axis.com)	
+ * Authors:  Mikael Starvik (starvik@axis.com)
  */
 
 #define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
@@ -15,13 +13,13 @@
 #define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-	
+
 	.ascii "HW_PARAM_MAGIC" ; Magic number
 	.dword 0xc0004000	; Kernel start address
 
 	; Debug port
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-	.dword 0		
+	.dword 0
 #elif defined(CONFIG_ETRAX_DEBUG_PORT1)
 	.dword 1
 #elif defined(CONFIG_ETRAX_DEBUG_PORT2)
@@ -30,7 +28,7 @@
 	.dword 3
 #else
 	.dword 4 ; No debug
-#endif			
+#endif
 
 	; SDRAM or EDO DRAM?
 #ifdef CONFIG_ETRAX_SDRAM
@@ -39,7 +37,7 @@
 	.dword 0
 #endif
 
-	; Register values 
+	; Register values
 	.dword R_WAITSTATES
 	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
 	.dword R_BUS_CONFIG
@@ -56,7 +54,7 @@
 	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
 #endif
 	.dword R_PORT_PA_SET
-	.dword PA_SET_VALUE 
+	.dword PA_SET_VALUE
 	.dword R_PORT_PB_SET
 	.dword PB_SET_VALUE
 	.dword 0 ; No more register values
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index b9e328e688b..a2dd740c590 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -360,24 +360,10 @@ config ETRAX_SER4_DSR_BIT
 	string "Ser 4 DSR bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_SER3_CD_BIT
+config ETRAX_SER4_CD_BIT
 	string "Ser 4 CD bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_RS485
-	bool "RS-485 support"
-	depends on ETRAXFS_SERIAL
-	help
-	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-
-config ETRAX_RS485_DISABLE_RECEIVER
-	bool "Disable serial receiver"
-	depends on ETRAX_RS485
-	help
-	  It is necessary to disable the serial receiver to avoid serial
-	  loopback.  Not all products are able to do this in software only.
-
 config ETRAX_SYNCHRONOUS_SERIAL
 	bool "Synchronous serial-port support"
 	depends on ETRAX_ARCH_V32
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 506826399ae..2fd6a740d89 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -649,10 +649,10 @@ i2c_release(struct inode *inode, struct file *filp)
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long
+i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
+	int ret;
 	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
 		return -ENOTTY;
 	}
@@ -665,9 +665,13 @@ i2c_ioctl(struct inode *inode, struct file *file,
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
 
-			return i2c_writereg(I2C_ARGSLAVE(arg),
+			lock_kernel();
+			ret = i2c_writereg(I2C_ARGSLAVE(arg),
 					    I2C_ARGREG(arg),
 					    I2C_ARGVALUE(arg));
+			unlock_kernel();
+			return ret;
+
 		case I2C_READREG:
 		{
 			unsigned char val;
@@ -675,7 +679,9 @@ i2c_ioctl(struct inode *inode, struct file *file,
 			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
+			lock_kernel();
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			unlock_kernel();
 			D(printk("= %d\n", val));
 			return val;
 		}
@@ -688,10 +694,10 @@ i2c_ioctl(struct inode *inode, struct file *file,
 }
 
 static const struct file_operations i2c_fops = {
-	.owner =    THIS_MODULE,
-	.ioctl =    i2c_ioctl,
-	.open =     i2c_open,
-	.release =  i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 static int __init i2c_init(void)
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index f4478506e52..bef6eb53b15 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
@@ -49,7 +50,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -57,8 +58,8 @@ int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
 static int voltage_low;
 
 static const struct file_operations pcf8563_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	pcf8563_ioctl
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -208,8 +209,7 @@ pcf8563_exit(void)
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -335,6 +335,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c
index 64933e2c0f5..bde8d1a10ca 100644
--- a/arch/cris/arch-v32/kernel/crisksyms.c
+++ b/arch/cris/arch-v32/kernel/crisksyms.c
@@ -24,5 +24,5 @@ EXPORT_SYMBOL(crisv32_io_get_name);
 EXPORT_SYMBOL(crisv32_io_get);
 
 /* Functions masking/unmasking interrupts */
-EXPORT_SYMBOL(mask_irq);
-EXPORT_SYMBOL(unmask_irq);
+EXPORT_SYMBOL(crisv32_mask_irq);
+EXPORT_SYMBOL(crisv32_unmask_irq);
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index b6241198fb9..0b1febe44aa 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -280,8 +280,7 @@ out:
 	return cpu;
 }
 
-void
-mask_irq(int irq)
+void crisv32_mask_irq(int irq)
 {
 	int cpu;
 
@@ -289,8 +288,7 @@ mask_irq(int irq)
 		block_irq(irq, cpu);
 }
 
-void
-unmask_irq(int irq)
+void crisv32_unmask_irq(int irq)
 {
 	unblock_irq(irq, irq_cpu(irq));
 }
@@ -298,23 +296,23 @@ unmask_irq(int irq)
 
 static unsigned int startup_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 	return 0;
 }
 
 static void shutdown_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void enable_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 }
 
 static void disable_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void ack_crisv32_irq(unsigned int irq)
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 058adddf4e4..84fed3b4b07 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -168,8 +168,8 @@ void __init smp_callin(void)
 
 	/* Enable IRQ and idle */
 	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
-	unmask_irq(IPI_INTR_VECT);
-	unmask_irq(TIMER0_INTR_VECT);
+	crisv32_unmask_irq(IPI_INTR_VECT);
+	crisv32_unmask_irq(TIMER0_INTR_VECT);
 	preempt_disable();
 	notify_cpu_starting(cpu);
 	local_irq_enable();
diff --git a/arch/cris/include/arch-v10/arch/irq.h b/arch/cris/include/arch-v10/arch/irq.h
index 6248004eca1..7d345947b3e 100644
--- a/arch/cris/include/arch-v10/arch/irq.h
+++ b/arch/cris/include/arch-v10/arch/irq.h
@@ -93,15 +93,16 @@ void set_break_vector(int n, irqvectptr addr);
   "push $r10\n\t"       /* push orig_r10 */ \
   "clear.d [$sp=$sp-4]\n\t"  /* frametype - this is a normal stackframe */
 
-  /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
+/* BLOCK_IRQ and UNBLOCK_IRQ do the same as
+ * crisv10_mask_irq and crisv10_unmask_irq */
 
 #define BLOCK_IRQ(mask,nr) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000d8]\n\t" 
-  
+  "move.d $r0,[0xb00000d8]\n\t"
+
 #define UNBLOCK_IRQ(mask) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000dc]\n\t" 
+  "move.d $r0,[0xb00000dc]\n\t"
 
 #define IRQ_NAME2(nr) nr##_interrupt(void)
 #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h
index 9e4c9fbdfdd..b31e9984f84 100644
--- a/arch/cris/include/arch-v32/arch/irq.h
+++ b/arch/cris/include/arch-v32/arch/irq.h
@@ -23,8 +23,8 @@ struct etrax_interrupt_vector {
 
 extern struct etrax_interrupt_vector *etrax_irv;	/* head.S */
 
-void mask_irq(int irq);
-void unmask_irq(int irq);
+void crisv32_mask_irq(int irq);
+void crisv32_unmask_irq(int irq);
 
 void set_exception_vector(int n, irqvectptr addr);
 
diff --git a/arch/cris/include/asm/param.h b/arch/cris/include/asm/param.h
index 0e47994e40b..484fcf8667c 100644
--- a/arch/cris/include/asm/param.h
+++ b/arch/cris/include/asm/param.h
@@ -2,22 +2,9 @@
 #define _ASMCRIS_PARAM_H
 
 /* Currently we assume that HZ=100 is good for CRIS. */
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
 
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
-#endif
+#endif /* _ASMCRIS_PARAM_H */
diff --git a/arch/frv/kernel/break.S b/arch/frv/kernel/break.S
index bd0bdf908d9..cbb6958a314 100644
--- a/arch/frv/kernel/break.S
+++ b/arch/frv/kernel/break.S
@@ -21,7 +21,7 @@
 #
 # the break handler has its own stack
 #
-	.section	.bss.stack
+	.section	.bss..stack
 	.globl		__break_user_context
 	.balign		THREAD_SIZE
 __break_stack:
@@ -63,7 +63,7 @@ __break_trace_through_exceptions:
 # entry point for Break Exceptions/Interrupts
 #
 ###############################################################################
-	.section	.text.break
+	.section	.text..break
 	.balign		4
 	.globl		__entry_break
 __entry_break:
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 189397ec012..63d579bf1c2 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -38,7 +38,7 @@
 
 #define nr_syscalls ((syscall_table_size)/4)
 
-	.section	.text.entry
+	.section	.text..entry
 	.balign		4
 
 .macro LEDS val
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 84d103c33c9..a4dba6b20bd 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -1789,6 +1789,12 @@ void gdbstub(int sigval)
 			flush_cache = 1;
 			break;
 
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
 			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
 		case 'P':
 			ptr = &input_buffer[1];
diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S
index b825ef3f2d5..e9a8cc63ac9 100644
--- a/arch/frv/kernel/head.S
+++ b/arch/frv/kernel/head.S
@@ -542,7 +542,7 @@ __head_end:
 	.size		_boot, .-_boot
 
 	# provide a point for GDB to place a break
-	.section	.text.start,"ax"
+	.section	.text..start,"ax"
 	.globl		_start
 	.balign		4
 _start:
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index cbe811fccfc..8b973f3cc90 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -57,10 +57,10 @@ SECTIONS
   _text = .;
   _stext = .;
   .text : {
-	*(.text.start)
-	*(.text.entry)
-	*(.text.break)
-	*(.text.tlbmiss)
+	*(.text..start)
+	*(.text..entry)
+	*(.text..break)
+	*(.text..tlbmiss)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -114,7 +114,7 @@ SECTIONS
 
   .sbss		: { *(.sbss .sbss.*) }
   .bss		: { *(.bss .bss.*) }
-  .bss.stack	: { *(.bss) }
+  .bss..stack	: { *(.bss) }
 
   __bss_stop = .;
   _end = . ;
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 30f5d100a81..a325d57a83d 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -257,10 +257,10 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
  */
  out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(__frame))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(__frame))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/frv/mm/tlb-miss.S b/arch/frv/mm/tlb-miss.S
index 7f392bc651a..f3ac019bb18 100644
--- a/arch/frv/mm/tlb-miss.S
+++ b/arch/frv/mm/tlb-miss.S
@@ -15,7 +15,7 @@
 #include <asm/pgtable.h>
 #include <asm/spr-regs.h>
 
-	.section	.text.tlbmiss
+	.section	.text..tlbmiss
 	.balign		4
 
 	.globl		__entry_insn_mmu_miss
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
index 985a81a2435..10e9a2d1cc6 100644
--- a/arch/h8300/boot/compressed/head.S
+++ b/arch/h8300/boot/compressed/head.S
@@ -9,7 +9,7 @@
 
 #define SRAM_START 0xff4000
 
-	.section	.text.startup
+	.section	.text..startup
 	.global	startup
 startup:
 	mov.l	#SRAM_START+0x8000, sp
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
index 65e2a0d1ae3..a0a3a0ed54e 100644
--- a/arch/h8300/boot/compressed/vmlinux.lds
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -4,7 +4,7 @@ SECTIONS
         {
         __stext = . ;
 	__text = .;
-	       *(.text.startup)
+	       *(.text..startup)
 	       *(.text)
         __etext = . ;
         }
diff --git a/arch/ia64/include/asm/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
index c1642fd6402..3ab6d75aa3d 100644
--- a/arch/ia64/include/asm/asmmacro.h
+++ b/arch/ia64/include/asm/asmmacro.h
@@ -70,12 +70,12 @@ name:
  * path (ivt.S - TLB miss processing) or in places where it might not be
  * safe to use a "tpa" instruction (mca_asm.S - error recovery).
  */
-	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.section ".data..patch.vtop", "a"	// declare section & section attributes
 	.previous
 
 #define	LOAD_PHYSICAL(pr, reg, obj)		\
 [1:](pr)movl reg = obj;				\
-	.xdata4 ".data.patch.vtop", 1b-.
+	.xdata4 ".data..patch.vtop", 1b-.
 
 /*
  * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
@@ -84,11 +84,11 @@ name:
 #define DO_MCKINLEY_E9_WORKAROUND
 
 #ifdef DO_MCKINLEY_E9_WORKAROUND
-	.section ".data.patch.mckinley_e9", "a"
+	.section ".data..patch.mckinley_e9", "a"
 	.previous
 /* workaround for Itanium 2 Errata 9: */
 # define FSYS_RETURN					\
-	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+	.xdata4 ".data..patch.mckinley_e9", 1f-.;	\
 1:{ .mib;						\
 	nop.m 0;					\
 	mov r16=ar.pfs;					\
@@ -107,11 +107,11 @@ name:
  * If physical stack register size is different from DEF_NUM_STACK_REG,
  * dynamically patch the kernel for correct size.
  */
-	.section ".data.patch.phys_stack_reg", "a"
+	.section ".data..patch.phys_stack_reg", "a"
 	.previous
 #define LOAD_PHYS_STACK_REG_SIZE(reg)			\
 [1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
-	.xdata4 ".data.patch.phys_stack_reg", 1b-.
+	.xdata4 ".data..patch.phys_stack_reg", 1b-.
 
 /*
  * Up until early 2004, use of .align within a function caused bad unwind info.
diff --git a/arch/ia64/include/asm/cache.h b/arch/ia64/include/asm/cache.h
index e7482bd628f..988254a7d34 100644
--- a/arch/ia64/include/asm/cache.h
+++ b/arch/ia64/include/asm/cache.h
@@ -24,6 +24,6 @@
 # define SMP_CACHE_BYTES	(1 << 3)
 #endif
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif /* _ASM_IA64_CACHE_H */
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index a362e67e0ca..2f229e5de49 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -235,6 +235,7 @@ struct kvm_vm_data {
 #define KVM_REQ_PTC_G		32
 #define KVM_REQ_RESUME		33
 
+#define KVM_HPAGE_GFN_SHIFT(x)	0
 #define KVM_NR_PAGE_SIZES	1
 #define KVM_PAGES_PER_HPAGE(x)	1
 
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
index 1bd40826569..14aa1c58912 100644
--- a/arch/ia64/include/asm/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
@@ -31,7 +31,7 @@ extern void *per_cpu_init(void);
 
 #endif	/* SMP */
 
-#define PER_CPU_BASE_SECTION ".data.percpu"
+#define PER_CPU_BASE_SECTION ".data..percpu"
 
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
diff --git a/arch/ia64/kernel/Makefile.gate b/arch/ia64/kernel/Makefile.gate
index ab9b03a9adc..ceeffc50976 100644
--- a/arch/ia64/kernel/Makefile.gate
+++ b/arch/ia64/kernel/Makefile.gate
@@ -21,7 +21,7 @@ GATECFLAGS_gate-syms.o = -r
 $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 	$(call if_changed,gate)
 
-# gate-data.o contains the gate DSO image as data in section .data.gate.
+# gate-data.o contains the gate DSO image as data in section .data..gate.
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
diff --git a/arch/ia64/kernel/gate-data.S b/arch/ia64/kernel/gate-data.S
index 258c0a3238f..b3ef1c72e13 100644
--- a/arch/ia64/kernel/gate-data.S
+++ b/arch/ia64/kernel/gate-data.S
@@ -1,3 +1,3 @@
-	.section .data.gate, "aw"
+	.section .data..gate, "aw"
 
 	.incbin "arch/ia64/kernel/gate.so"
diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S
index cf5e0a105e1..245d3e1ec7e 100644
--- a/arch/ia64/kernel/gate.S
+++ b/arch/ia64/kernel/gate.S
@@ -21,18 +21,18 @@
  * to targets outside the shared object) and to avoid multi-phase kernel builds, we
  * simply create minimalistic "patch lists" in special ELF sections.
  */
-	.section ".data.patch.fsyscall_table", "a"
+	.section ".data..patch.fsyscall_table", "a"
 	.previous
 #define LOAD_FSYSCALL_TABLE(reg)			\
 [1:]	movl reg=0;					\
-	.xdata4 ".data.patch.fsyscall_table", 1b-.
+	.xdata4 ".data..patch.fsyscall_table", 1b-.
 
-	.section ".data.patch.brl_fsys_bubble_down", "a"
+	.section ".data..patch.brl_fsys_bubble_down", "a"
 	.previous
 #define BRL_COND_FSYS_BUBBLE_DOWN(pr)			\
 [1:](pr)brl.cond.sptk 0;				\
 	;;						\
-	.xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
+	.xdata4 ".data..patch.brl_fsys_bubble_down", 1b-.
 
 GLOBAL_ENTRY(__kernel_syscall_via_break)
 	.prologue
diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S
index 88c64ed47c3..d32b0855110 100644
--- a/arch/ia64/kernel/gate.lds.S
+++ b/arch/ia64/kernel/gate.lds.S
@@ -33,21 +33,21 @@ SECTIONS
 	 */
 	. = GATE_ADDR + 0x600;
 
-	.data.patch		: {
+	.data..patch		: {
 		__paravirt_start_gate_mckinley_e9_patchlist = .;
-		*(.data.patch.mckinley_e9)
+		*(.data..patch.mckinley_e9)
 		__paravirt_end_gate_mckinley_e9_patchlist = .;
 
 		__paravirt_start_gate_vtop_patchlist = .;
-		*(.data.patch.vtop)
+		*(.data..patch.vtop)
 		__paravirt_end_gate_vtop_patchlist = .;
 
 		__paravirt_start_gate_fsyscall_patchlist = .;
-		*(.data.patch.fsyscall_table)
+		*(.data..patch.fsyscall_table)
 		__paravirt_end_gate_fsyscall_patchlist = .;
 
 		__paravirt_start_gate_brl_fsys_bubble_down_patchlist = .;
-		*(.data.patch.brl_fsys_bubble_down)
+		*(.data..patch.brl_fsys_bubble_down)
 		__paravirt_end_gate_brl_fsys_bubble_down_patchlist = .;
 	}						:readable
 
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index e253ab8fcbc..f9efe9739d3 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -23,7 +23,7 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * Initial task structure.
  *
  * We need to make sure that this is properly aligned due to the way process stacks are
- * handled. This is done by having a special ".data.init_task" section...
+ * handled. This is done by having a special ".data..init_task" section...
  */
 #define init_thread_info	init_task_mem.s.thread_info
 
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 179fd122e83..d93e396bf59 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -82,7 +82,7 @@
 	mov r19=n;;			/* prepare to save predicates */		\
 	br.sptk.many dispatch_to_fault_handler
 
-	.section .text.ivt,"ax"
+	.section .text..ivt,"ax"
 
 	.align 32768	// align on 32KB boundary
 	.global ia64_ivt
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 292e214a3b8..d56753a1163 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -16,7 +16,7 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
-.section ".data.patch.rse", "a"
+.section ".data..patch.rse", "a"
 .previous
 
 /*
@@ -215,7 +215,7 @@
 (pUStk) extr.u r17=r18,3,6;			\
 (pUStk)	sub r16=r18,r22;			\
 [1:](pKStk)	br.cond.sptk.many 1f;		\
-	.xdata4 ".data.patch.rse",1b-.		\
+	.xdata4 ".data..patch.rse",1b-.		\
 	;;					\
 	cmp.ge p6,p7 = 33,r17;			\
 	;;					\
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
index 6158560d7f1..92d880c4d3d 100644
--- a/arch/ia64/kernel/paravirtentry.S
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -28,7 +28,7 @@
 #include "entry.h"
 
 #define DATA8(sym, init_value)			\
-	.pushsection .data.read_mostly ;	\
+	.pushsection .data..read_mostly ;	\
 	.align 8 ;				\
 	.global sym ;				\
 	sym: ;					\
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 1295ba327f6..e07218a2577 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -8,7 +8,7 @@
 
 #define IVT_TEXT							\
 		VMLINUX_SYMBOL(__start_ivt_text) = .;			\
-		*(.text.ivt)						\
+		*(.text..ivt)						\
 		VMLINUX_SYMBOL(__end_ivt_text) = .;
 
 OUTPUT_FORMAT("elf64-ia64-little")
@@ -54,8 +54,8 @@ SECTIONS
   .text2 : AT(ADDR(.text2) - LOAD_OFFSET)
 	{ *(.text2) }
 #ifdef CONFIG_SMP
-  .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET)
-	{ *(.text.lock) }
+  .text..lock : AT(ADDR(.text..lock) - LOAD_OFFSET)
+	{ *(.text..lock) }
 #endif
   _etext = .;
 
@@ -75,10 +75,10 @@ SECTIONS
 	  __stop___mca_table = .;
 	}
 
-  .data.patch.phys_stack_reg : AT(ADDR(.data.patch.phys_stack_reg) - LOAD_OFFSET)
+  .data..patch.phys_stack_reg : AT(ADDR(.data..patch.phys_stack_reg) - LOAD_OFFSET)
 	{
 	  __start___phys_stack_reg_patchlist = .;
-	  *(.data.patch.phys_stack_reg)
+	  *(.data..patch.phys_stack_reg)
 	  __end___phys_stack_reg_patchlist = .;
 	}
 
@@ -110,24 +110,24 @@ SECTIONS
   INIT_TEXT_SECTION(PAGE_SIZE)
   INIT_DATA_SECTION(16)
 
-  .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
+  .data..patch.vtop : AT(ADDR(.data..patch.vtop) - LOAD_OFFSET)
 	{
 	  __start___vtop_patchlist = .;
-	  *(.data.patch.vtop)
+	  *(.data..patch.vtop)
 	  __end___vtop_patchlist = .;
 	}
 
-  .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+  .data..patch.rse : AT(ADDR(.data..patch.rse) - LOAD_OFFSET)
 	{
 	  __start___rse_patchlist = .;
-	  *(.data.patch.rse)
+	  *(.data..patch.rse)
 	  __end___rse_patchlist = .;
 	}
 
-  .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
+  .data..patch.mckinley_e9 : AT(ADDR(.data..patch.mckinley_e9) - LOAD_OFFSET)
 	{
 	  __start___mckinley_e9_bundles = .;
-	  *(.data.patch.mckinley_e9)
+	  *(.data..patch.mckinley_e9)
 	  __end___mckinley_e9_bundles = .;
 	}
 
@@ -175,17 +175,17 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
+  .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET)
         {
 	PAGE_ALIGNED_DATA(PAGE_SIZE)
 	  . = ALIGN(PAGE_SIZE);
 	  __start_gate_section = .;
-	  *(.data.gate)
+	  *(.data..gate)
 	  __stop_gate_section = .;
 #ifdef CONFIG_XEN
 	  . = ALIGN(PAGE_SIZE);
 	  __xen_start_gate_section = .;
-	  *(.data.gate.xen)
+	  *(.data..gate.xen)
 	  __xen_stop_gate_section = .;
 #endif
 	}
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d5f4e916120..5cb58655cd5 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -144,6 +144,7 @@ int kvm_arch_hardware_enable(void *garbage)
 				VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
+		spin_unlock(&vp_lock);
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
 		return -EINVAL;
 	}
@@ -724,8 +725,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	int r;
 	sigset_t sigsaved;
 
-	vcpu_load(vcpu);
-
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
@@ -747,7 +746,6 @@ out:
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	vcpu_put(vcpu);
 	return r;
 }
 
@@ -882,8 +880,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
 	int i;
 
-	vcpu_load(vcpu);
-
 	for (i = 0; i < 16; i++) {
 		vpd->vgr[i] = regs->vpd.vgr[i];
 		vpd->vbgr[i] = regs->vpd.vbgr[i];
@@ -930,8 +926,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	vcpu->arch.itc_offset = regs->saved_itc - kvm_get_itc(vcpu);
 	set_bit(KVM_REQ_RESUME, &vcpu->requests);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -1801,35 +1795,24 @@ void kvm_arch_exit(void)
 	kvm_vmm_info = NULL;
 }
 
-static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
-		struct kvm_dirty_log *log)
+static void kvm_ia64_sync_dirty_log(struct kvm *kvm,
+				    struct kvm_memory_slot *memslot)
 {
-	struct kvm_memory_slot *memslot;
-	int r, i;
+	int i;
 	long base;
 	unsigned long n;
 	unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
 			offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
 
-	r = -EINVAL;
-	if (log->slot >= KVM_MEMORY_SLOTS)
-		goto out;
-
-	memslot = &kvm->memslots->memslots[log->slot];
-	r = -ENOENT;
-	if (!memslot->dirty_bitmap)
-		goto out;
-
 	n = kvm_dirty_bitmap_bytes(memslot);
 	base = memslot->base_gfn / BITS_PER_LONG;
 
+	spin_lock(&kvm->arch.dirty_log_lock);
 	for (i = 0; i < n/sizeof(long); ++i) {
 		memslot->dirty_bitmap[i] = dirty_bitmap[base + i];
 		dirty_bitmap[base + i] = 0;
 	}
-	r = 0;
-out:
-	return r;
+	spin_unlock(&kvm->arch.dirty_log_lock);
 }
 
 int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
@@ -1841,12 +1824,17 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	int is_dirty = 0;
 
 	mutex_lock(&kvm->slots_lock);
-	spin_lock(&kvm->arch.dirty_log_lock);
 
-	r = kvm_ia64_sync_dirty_log(kvm, log);
-	if (r)
+	r = -EINVAL;
+	if (log->slot >= KVM_MEMORY_SLOTS)
+		goto out;
+
+	memslot = &kvm->memslots->memslots[log->slot];
+	r = -ENOENT;
+	if (!memslot->dirty_bitmap)
 		goto out;
 
+	kvm_ia64_sync_dirty_log(kvm, memslot);
 	r = kvm_get_dirty_log(kvm, log, &is_dirty);
 	if (r)
 		goto out;
@@ -1854,14 +1842,12 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
 		kvm_flush_remote_tlbs(kvm);
-		memslot = &kvm->memslots->memslots[log->slot];
 		n = kvm_dirty_bitmap_bytes(memslot);
 		memset(memslot->dirty_bitmap, 0, n);
 	}
 	r = 0;
 out:
 	mutex_unlock(&kvm->slots_lock);
-	spin_unlock(&kvm->arch.dirty_log_lock);
 	return r;
 }
 
@@ -1952,11 +1938,6 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return vcpu->arch.timer_fired;
 }
 
-gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
-{
-	return gfn;
-}
-
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE) ||
@@ -1966,9 +1947,7 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	vcpu_load(vcpu);
 	mp_state->mp_state = vcpu->arch.mp_state;
-	vcpu_put(vcpu);
 	return 0;
 }
 
@@ -1999,10 +1978,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 {
 	int r = 0;
 
-	vcpu_load(vcpu);
 	vcpu->arch.mp_state = mp_state->mp_state;
 	if (vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)
 		r = vcpu_reset(vcpu);
-	vcpu_put(vcpu);
 	return r;
 }
diff --git a/arch/ia64/kvm/vmm_ivt.S b/arch/ia64/kvm/vmm_ivt.S
index 40920c63064..24018484c6e 100644
--- a/arch/ia64/kvm/vmm_ivt.S
+++ b/arch/ia64/kvm/vmm_ivt.S
@@ -104,7 +104,7 @@ GLOBAL_ENTRY(kvm_vmm_panic)
 	br.call.sptk.many b6=vmm_panic_handler;
 END(kvm_vmm_panic)
 
-    .section .text.ivt,"ax"
+    .section .text..ivt,"ax"
 
     .align 32768    // align on 32KB boundary
     .global kvm_ia64_ivt
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 5dfd916e9ea..7b3cdc6c6d9 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -121,7 +121,7 @@ static inline void down_spin(struct spinaphore *ss)
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();
diff --git a/arch/ia64/scripts/unwcheck.py b/arch/ia64/scripts/unwcheck.py
index c27849889e1..2bfd941ff7c 100644
--- a/arch/ia64/scripts/unwcheck.py
+++ b/arch/ia64/scripts/unwcheck.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 #
 # Usage: unwcheck.py FILE
 #
diff --git a/arch/ia64/xen/gate-data.S b/arch/ia64/xen/gate-data.S
index 7d4830afc91..6f95b6b32a4 100644
--- a/arch/ia64/xen/gate-data.S
+++ b/arch/ia64/xen/gate-data.S
@@ -1,3 +1,3 @@
-	.section .data.gate.xen, "aw"
+	.section .data..gate.xen, "aw"
 
 	.incbin "arch/ia64/xen/gate.so"
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
index aff8346ea19..b820ed02ab9 100644
--- a/arch/ia64/xen/xensetup.S
+++ b/arch/ia64/xen/xensetup.S
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <xen/interface/elfnote.h>
 
-	.section .data.read_mostly
+	.section .data..read_mostly
 	.align 8
 	.global xen_domain_type
 xen_domain_type:
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 28ee389e5f5..b8ec002aef8 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -188,7 +188,6 @@ good_area:
 	if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
 	  goto bad_area;
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (error_code & ACE_USERMODE)
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!(error_code & ACE_USERMODE))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 9f1784f586b..a91b2713451 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -57,7 +57,7 @@ SECTIONS {
 	.romvec : {
 		__rom_start = . ;
 		_romvec = .;
-		*(.data.initvect)
+		*(.data..initvect)
 	} > romvec
 #endif
 
@@ -68,7 +68,7 @@ SECTIONS {
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-        	*(.text.lock)
+		*(.text..lock)
 
 		. = ALIGN(16);          /* Exception table              */
 		__start___ex_table = .;
diff --git a/arch/m68knommu/platform/68360/head-ram.S b/arch/m68knommu/platform/68360/head-ram.S
index 2ef06242398..8eb94fb6b97 100644
--- a/arch/m68knommu/platform/68360/head-ram.S
+++ b/arch/m68knommu/platform/68360/head-ram.S
@@ -280,7 +280,7 @@ _dprbase:
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
diff --git a/arch/m68knommu/platform/68360/head-rom.S b/arch/m68knommu/platform/68360/head-rom.S
index 62ecf4144b3..97510e55b80 100644
--- a/arch/m68knommu/platform/68360/head-rom.S
+++ b/arch/m68knommu/platform/68360/head-rom.S
@@ -291,7 +291,7 @@ _dprbase:
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 76818f92653..505a0859242 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -5,7 +5,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 
 config MICROBLAZE
 	def_bool y
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER
diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/memblock.h
index a0a0a929c29..f9c2fa331d2 100644
--- a/arch/microblaze/include/asm/lmb.h
+++ b/arch/microblaze/include/asm/memblock.h
@@ -6,12 +6,12 @@
  * for more details.
  */
 
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
 
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT	0xFFFFFFFF
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT	0xFFFFFFFF
 
-#endif /* _ASM_MICROBLAZE_LMB_H */
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
 
 
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index de493f86d28..464ff32bee3 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -34,6 +34,8 @@
 /* MS be sure that SLAB allocates aligned objects */
 #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index 9dcd90b5df5..79c74659f20 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -90,7 +90,6 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
-		sg->dma_length = sg->length;
 		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
 							sg->length, direction);
 	}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index a15ef6d67ca..427b13b4740 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -29,7 +29,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -49,12 +49,12 @@ void __init early_init_dt_scan_chosen_arch(unsigned long node)
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	lmb_add(base, size);
+	memblock_add(base, size);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -104,8 +104,8 @@ void __init early_init_devtree(void *params)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -113,9 +113,9 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	lmb_analyze();
+	memblock_analyze();
 
-	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
 	pr_debug(" <- early_init_devtree()\n");
 }
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index cca3579d426..db593498992 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -10,7 +10,7 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h> /* mem_init */
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
@@ -76,10 +76,10 @@ void __init setup_memory(void)
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		memory_start = (u32) lmb.memory.region[i].base;
-		memory_end = (u32) lmb.memory.region[i].base
-				+ (u32) lmb.memory.region[i].size;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		memory_start = (u32) memblock.memory.region[i].base;
+		memory_end = (u32) memblock.memory.region[i].base
+				+ (u32) memblock.memory.region[i].size;
 		if ((memory_start <= (u32)_text) &&
 					((u32)_text <= memory_end)) {
 			memory_size = memory_end - memory_start;
@@ -100,7 +100,7 @@ void __init setup_memory(void)
 	kernel_align_start = PAGE_DOWN((u32)_text);
 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
-	lmb_reserve(kernel_align_start, kernel_align_size);
+	memblock_reserve(kernel_align_start, kernel_align_size);
 	printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
@@ -141,18 +141,18 @@ void __init setup_memory(void)
 	map_size = init_bootmem_node(&contig_page_data,
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
 
 	/* reserve allocate blocks */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
+	for (i = 0; i < memblock.reserved.cnt; i++) {
 		pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
-			(u32) lmb.reserved.region[i].base,
-			(u32) lmb_size_bytes(&lmb.reserved, i));
-		reserve_bootmem(lmb.reserved.region[i].base,
-			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+			(u32) memblock.reserved.region[i].base,
+			(u32) memblock_size_bytes(&memblock.reserved, i));
+		reserve_bootmem(memblock.reserved.region[i].base,
+			memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
 #ifdef CONFIG_MMU
 	init_bootmem_done = 1;
@@ -235,7 +235,7 @@ static void mm_cmdline_setup(void)
 		if (maxmem && memory_size > maxmem) {
 			memory_size = maxmem;
 			memory_end = memory_start + memory_size;
-			lmb.memory.region[0].size = memory_size;
+			memblock.memory.region[0].size = memory_size;
 		}
 	}
 }
@@ -273,19 +273,19 @@ asmlinkage void __init mmu_init(void)
 {
 	unsigned int kstart, ksize;
 
-	if (!lmb.reserved.cnt) {
+	if (!memblock.reserved.cnt) {
 		printk(KERN_EMERG "Error memory count\n");
 		machine_restart(NULL);
 	}
 
-	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+	if ((u32) memblock.memory.region[0].size < 0x1000000) {
 		printk(KERN_EMERG "Memory must be greater than 16MB\n");
 		machine_restart(NULL);
 	}
 	/* Find main memory where the kernel is */
-	memory_start = (u32) lmb.memory.region[0].base;
-	memory_end = (u32) lmb.memory.region[0].base +
-				(u32) lmb.memory.region[0].size;
+	memory_start = (u32) memblock.memory.region[0].base;
+	memory_end = (u32) memblock.memory.region[0].base +
+				(u32) memblock.memory.region[0].size;
 	memory_size = memory_end - memory_start;
 
 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -297,7 +297,7 @@ asmlinkage void __init mmu_init(void)
 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 	/* kernel size */
 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
-	lmb_reserve(kstart, ksize);
+	memblock_reserve(kstart, ksize);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/* Remove the init RAM disk from the available memory. */
@@ -335,7 +335,7 @@ void __init *early_get_page(void)
 		 * Mem start + 32MB -> here is limit
 		 * because of mem mapping from head.S
 		 */
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					memory_start + 0x2000000));
 	}
 	return p;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 9cb782b8e03..23be25fec4d 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1277,6 +1277,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 2580e77624d..f9e5622ebc9 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -435,20 +435,21 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int i;
+	int err, i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+	err = platform_add_devices(au1xxx_platform_devices,
+				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
 	/* Register second MAC if enabled in pinfunc */
-	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
 		platform_device_register(&au1xxx_eth1_device);
 #endif
 
-	return platform_add_devices(au1xxx_platform_devices,
-				    ARRAY_SIZE(au1xxx_platform_devices));
+	return err;
 }
 
 arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 14eb8c492da..5ef06a164a8 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -193,9 +193,15 @@ static void restore_core_regs(void)
 
 void au_sleep(void)
 {
-	save_core_regs();
-	au1xxx_save_and_sleep();
-	restore_core_regs();
+	int cpuid = alchemy_get_cputype();
+	if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+		save_core_regs();
+		if (cpuid <= ALCHEMY_CPU_AU1500)
+			alchemy_sleep_au1000();
+		else if (cpuid <= ALCHEMY_CPU_AU1200)
+			alchemy_sleep_au1550();
+		restore_core_regs();
+	}
 }
 
 #endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4f4b16741d1..77f3c743b71 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -22,10 +22,9 @@
 	.set noat
 	.align	5
 
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
 	subu	sp, PT_SIZE
 	sw	$1, PT_R1(sp)
 	sw	$2, PT_R2(sp)
@@ -69,12 +68,32 @@ LEAF(au1xxx_save_and_sleep)
 	 */
 	lui	t3, 0xb190		/* sys_xxx */
 	sw	sp, 0x0018(t3)
-	la	k0, 3f			/* resume path */
+	la	k0, alchemy_sleep_wakeup	/* resume path */
 	sw	k0, 0x001c(t3)
+.endm
 
-	/* Put SDRAM into self refresh:  Preload instructions into cache,
-	 * issue a precharge, auto/self refresh, then sleep commands to it.
-	 */
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
 	.set	mips3
 	cache	0x14, 0(t0)
@@ -84,17 +103,32 @@ LEAF(au1xxx_save_and_sleep)
 	.set	mips0
 
 1:	lui 	a0, 0xb400		/* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) ||	\
-    defined(CONFIG_SOC_AU1500)
 	sw	zero, 0x001c(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
 	sw	zero, 0x0030(a0)  	/* Sleep */
 	sync
-#endif
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	mips3
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui 	a0, 0xb400		/* mem_xxx */
 	sw	zero, 0x08c0(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
@@ -114,26 +148,17 @@ LEAF(au1xxx_save_and_sleep)
 	and 	t1, t0, t1		/* clear CE[1:0] */
 	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
-#endif
 
-	/* put power supply and processor to sleep */
-	sw	zero, 0x0078(t3)	/* sys_slppwr */
-	sync
-	sw	zero, 0x007c(t3)	/* sys_sleep */
-	sync
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
 	 */
-3:	lw	k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
 	mtc0	k0, CP0_STATUS
 	lw	k0, 0x1c(sp)
 	mtc0	k0, CP0_CONTEXT
@@ -169,4 +194,4 @@ LEAF(au1xxx_save_and_sleep)
 	lw	$31, PT_R31(sp)
 	jr	ra
 	 addiu	sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index a9f0336e1f1..52d883d37dd 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -67,8 +67,6 @@ static void mtx1_power_off(void)
 
 void __init board_setup(void)
 {
-	alchemy_gpio2_enable();
-
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	au_sync_udelay(1);
+	udelay(1);
 	return 1;
 }
 
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 566f2d7f2ea..8f31d1d5968 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -542,7 +542,7 @@ static int __init ar7_register_uarts(void)
 	if (IS_ERR(bus_clk))
 		panic("unable to get bus clk\n");
 
-	uart_port.type		= PORT_16550A;
+	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
 	uart_port.iotype	= UPIO_MEM32;
 	uart_port.regshift	= 2;
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 35294b12d63..7465e8a72d9 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
 # under Linux.
 #
 
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
new file mode 100644
index 00000000000..06e03b222f6
--- /dev/null
+++ b/arch/mips/bcm47xx/nvram.c
@@ -0,0 +1,94 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+static char nvram_buf[NVRAM_SPACE];
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+	struct nvram_header *header;
+	int i;
+	u32 base, lim, off;
+	u32 *src, *dst;
+
+	base = mcore->flash_window;
+	lim = mcore->flash_window_size;
+
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		header = (struct nvram_header *)
+			KSEG1ADDR(base + off - NVRAM_SPACE);
+		if (header->magic == NVRAM_HEADER)
+			goto found;
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	return;
+
+found:
+	src = (u32 *) header;
+	dst = (u32 *) nvram_buf;
+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+		*dst++ = *src++;
+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+		*dst++ = le32_to_cpu(*src++);
+}
+
+int nvram_getenv(char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+
+	if (!name)
+		return 1;
+
+	if (!nvram_buf[0])
+		early_nvram_init();
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf) - 2;
+	end[0] = end[1] = '\0';
+	for (; *var; var = value + strlen(value) + 1) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if ((eq - var) == strlen(name) &&
+			strncmp(var, name, (eq - var)) == 0) {
+			snprintf(val, val_len, "%s", value);
+			return 0;
+		}
+	}
+	return 1;
+}
+EXPORT_SYMBOL(nvram_getenv);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index d442e11625f..b1aee33efd1 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -1,8 +1,8 @@
 /*
  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -33,6 +33,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <asm/fw/cfe/cfe_api.h>
+#include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
 EXPORT_SYMBOL(ssb_bcm47xx);
@@ -81,28 +82,42 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
 	/* Fill sprom structure */
 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
 	iv->sprom.revision = 3;
 
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et0mac);
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et1mac);
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
 
 	return 0;
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 9f544badd0b..39c23366c5c 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,9 @@ int __init bcm63xx_enet_register(int unit,
 	if (unit > 1)
 		return -ENODEV;
 
+	if (unit == 1 && BCMCPU_IS_6338())
+		return -ENODEV;
+
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 59dc0c7ef73..c63c56bfd18 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -434,7 +434,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -524,10 +524,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -576,10 +576,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index f1cf3894349..483ffea9ecb 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -50,7 +50,7 @@
 #define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
 #define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
 
-#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_PERIPHERAL	0x0
 #define AR7_RESET_SOFTWARE	0x4
 #define AR7_RESET_STATUS	0x8
 
@@ -128,7 +128,7 @@ static inline int ar7_has_high_cpmac(void)
 static inline void ar7_device_enable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) | (1 << bit), reset_reg);
 	msleep(20);
 }
@@ -136,7 +136,7 @@ static inline void ar7_device_enable(u32 bit)
 static inline void ar7_device_disable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
 	msleep(20);
 }
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
index 73f9b162c97..abc317c0372 100644
--- a/arch/mips/include/asm/mach-ar7/gpio.h
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -24,7 +24,7 @@
 #define AR7_GPIO_MAX 32
 #define NR_BUILTIN_GPIO AR7_GPIO_MAX
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index e76941db231..a6976619160 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -188,7 +188,8 @@ extern unsigned long get_au1x00_uart_baud_base(void);
 extern unsigned long au1xxx_calc_clock(void);
 
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
-void au1xxx_save_and_sleep(void);
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
 void au_sleep(void);
 
 
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
new file mode 100644
index 00000000000..0d8cc146f7a
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2005, Broadcom Corporation
+ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+#include <linux/types.h>
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
+#define NVRAM_VERSION		1
+#define NVRAM_HEADER_SIZE	20
+#define NVRAM_SPACE		0x8000
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+extern int nvram_getenv(char *name, char *val, size_t val_len);
+
+#endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
index 7cda8c0a397..1eb534de8e3 100644
--- a/arch/mips/include/asm/mach-bcm63xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -3,7 +3,7 @@
 
 #include <bcm63xx_gpio.h>
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 1b5a6648eb8..baa318a59c9 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -984,16 +984,17 @@
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
+#define __NR_getdents64			(__NR_Linux + 299)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		298
+#define __NR_Linux_syscalls		299
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		298
+#define __NR_N32_Linux_syscalls		299
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index e9e64e0ff7a..5a84a1f1123 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -2,7 +2,7 @@
  * Code for replacing ftrace calls with jumps.
  *
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * Thanks goes to Steven Rostedt for writing the original x86 version.
@@ -12,18 +12,62 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
-#include <asm/cacheflush.h>
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/uasm.h>
+
+/*
+ * If the Instruction Pointer is in module space (0xc0000000), return true;
+ * otherwise, it is in kernel space (0x80000000), return false.
+ *
+ * FIXME: This will not work when the kernel space and module space are the
+ * same. If they are the same, we need to modify scripts/recordmcount.pl,
+ * ftrace_make_nop/call() and the other related parts to ensure the
+ * enabling/disabling of the calling site to _mcount is right for both kernel
+ * and module.
+ */
+
+static inline int in_module(unsigned long ip)
+{
+	return ip & 0x40000000;
+}
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
-#define jump_insn_encode(op_code, addr) \
-	((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
 
-static unsigned int ftrace_nop = 0x00000000;
+#define INSN_B_1F_4 0x10000004	/* b 1f; offset = 4 */
+#define INSN_B_1F_5 0x10000005	/* b 1f; offset = 5 */
+#define INSN_NOP 0x00000000	/* nop */
+#define INSN_JAL(addr)	\
+	((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_lui_v1_hi16_mcount __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+	u32 *buf;
+	unsigned int v1;
+
+	/* lui v1, hi16_mcount */
+	v1 = 3;
+	buf = (u32 *)&insn_lui_v1_hi16_mcount;
+	UASM_i_LA_mostly(&buf, v1, MCOUNT_ADDR);
+
+	/* jal (ftrace_caller + 8), jump over the first two instruction */
+	buf = (u32 *)&insn_jal_ftrace_caller;
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* j ftrace_graph_caller */
+	buf = (u32 *)&insn_j_ftrace_graph_caller;
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+#endif
+}
 
 static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 {
@@ -40,67 +84,56 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	return 0;
 }
 
-static int lui_v1;
-static int jal_mcount;
-
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
-	int faulted;
 	unsigned long ip = rec->ip;
 
-	/* We have compiled module with -mlong-calls, but compiled the kernel
-	 * without it, we need to cope with them respectively. */
-	if (ip & 0x40000000) {
-		/* record it for ftrace_make_call */
-		if (lui_v1 == 0) {
-			/* lui_v1 = *(unsigned int *)ip; */
-			safe_load_code(lui_v1, ip, faulted);
-
-			if (unlikely(faulted))
-				return -EFAULT;
-		}
-
-		/* lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+	/*
+	 * We have compiled module with -mlong-calls, but compiled the kernel
+	 * without it, we need to cope with them respectively.
+	 */
+	if (in_module(ip)) {
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000005)
+		 * addiu v1, v1, low_16bit_of_mcount
+		 * move at, ra
+		 * move $12, ra_address
+		 * jalr v1
+		 *  sub sp, sp, 8
+		 *                                  1: offset = 5 instructions
+		 */
+		new = INSN_B_1F_5;
+#else
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
 		 * addiu v1, v1, low_16bit_of_mcount
 		 * move at, ra
 		 * jalr v1
-		 * nop
-		 * 				     1f: (ip + 12)
+		 *  nop | move $12, ra_address | sub sp, sp, 8
+		 *                                  1: offset = 4 instructions
 		 */
-		new = 0x10000004;
+		new = INSN_B_1F_4;
+#endif
 	} else {
-		/* record/calculate it for ftrace_make_call */
-		if (jal_mcount == 0) {
-			/* We can record it directly like this:
-			 *     jal_mcount = *(unsigned int *)ip;
-			 * Herein, jump over the first two nop instructions */
-			jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
-		}
-
-		/* move at, ra
-		 * jalr v1		--> nop
+		/*
+		 * move at, ra
+		 * jal _mcount		--> nop
 		 */
-		new = ftrace_nop;
+		new = INSN_NOP;
 	}
 	return ftrace_modify_code(ip, new);
 }
 
-static int modified;	/* initialized as 0 by default */
-
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
-	/* We just need to remove the "b ftrace_stub" at the fist time! */
-	if (modified == 0) {
-		modified = 1;
-		ftrace_modify_code(addr, ftrace_nop);
-	}
 	/* ip, module: 0xc0000000, kernel: 0x80000000 */
-	new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+	new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
 
 	return ftrace_modify_code(ip, new);
 }
@@ -111,44 +144,48 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned int new;
 
-	new = jump_insn_encode(JAL, (unsigned long)func);
+	new = INSN_JAL((unsigned long)func);
 
 	return ftrace_modify_code(FTRACE_CALL_IP, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
+	/* Encode the instructions when booting */
+	ftrace_dyn_arch_init_insns();
+
+	/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+	ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
 	/* The return code is retured via data */
 	*(unsigned long *)data = 0;
 
 	return 0;
 }
-#endif				/* CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 extern void ftrace_graph_call(void);
-#define JMP	0x08000000	/* jump to target directly */
-#define CALL_FTRACE_GRAPH_CALLER \
-	jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
 #define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
 
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
-				  CALL_FTRACE_GRAPH_CALLER);
+			insn_j_ftrace_graph_caller);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
 }
 
-#endif				/* !CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
+
 #define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
 #define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
@@ -162,17 +199,17 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 	unsigned int code;
 	int faulted;
 
-	/* in module or kernel? */
-	if (self_addr & 0x40000000) {
-		/* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
-		ip = self_addr - 20;
-	} else {
-		/* kernel: move to the instruction "move ra, at" */
-		ip = self_addr - 12;
-	}
+	/*
+	 * For module, move the ip from calling site of mcount to the
+	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
+	 * kernel, move to the instruction "move ra, at"(offset is 12)
+	 */
+	ip = self_addr - (in_module(self_addr) ? 20 : 12);
 
-	/* search the text until finding the non-store instruction or "s{d,w}
-	 * ra, offset(sp)" instruction */
+	/*
+	 * search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction
+	 */
 	do {
 		ip -= 4;
 
@@ -181,10 +218,11 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 
 		if (unlikely(faulted))
 			return 0;
-
-		/* If we hit the non-store instruction before finding where the
+		/*
+		 * If we hit the non-store instruction before finding where the
 		 * ra is stored, then this is a leaf function and it does not
-		 * store the ra on the stack. */
+		 * store the ra on the stack
+		 */
 		if ((code & S_R_SP) != S_R_SP)
 			return parent_addr;
 
@@ -202,7 +240,7 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 	return 0;
 }
 
-#endif
+#endif	/* !KBUILD_MCOUNT_RA_ADDRESS */
 
 /*
  * Hook the return address and push it in the stack of return addrs
@@ -220,7 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	/* "parent" is the stack address saved the return address of the caller
+	/*
+	 * "parent" is the stack address saved the return address of the caller
 	 * of _mcount.
 	 *
 	 * if the gcc < 4.5, a leaf function does not save the return address
@@ -242,10 +281,11 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		goto out;
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
 	parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
-							 (unsigned long)parent,
-							 fp);
-	/* If fails when getting the stack address of the non-leaf function's
-	 * ra, stop function graph tracer and return */
+			(unsigned long)parent, fp);
+	/*
+	 * If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return
+	 */
 	if (parent == 0)
 		goto out;
 #endif
@@ -272,4 +312,4 @@ out:
 	ftrace_graph_stop();
 	WARN_ON(1);
 }
-#endif				/* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 6851fc97a51..6bfcb7a00ec 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -6,6 +6,7 @@
  * more details.
  *
  * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
@@ -45,8 +46,6 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#endif
-#ifdef CONFIG_64BIT
 	PTR_ADDIU	sp, PT_SIZE
 #else
 	PTR_ADDIU	sp, (PT_SIZE + 8)
@@ -58,6 +57,12 @@
 	 move ra, AT
 	.endm
 
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG	$12
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 NESTED(ftrace_caller, PT_SIZE, ra)
@@ -71,14 +76,14 @@ _mcount:
 
 	MCOUNT_SAVE_REGS
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_S	t0, PT_R12(sp)	/* t0 saved the location of the return address(at) by -mmcount-ra-address */
+	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call
@@ -119,9 +124,9 @@ NESTED(_mcount, PT_SIZE, ra)
 static_trace:
 	MCOUNT_SAVE_REGS
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	jalr	t2		/* (1) call *ftrace_trace_function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 	MCOUNT_RESTORE_REGS
 	.globl ftrace_stub
@@ -134,28 +139,34 @@ ftrace_stub:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 NESTED(ftrace_graph_caller, PT_SIZE, ra)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	PTR_L	a1, PT_R31(sp)	/* load the original ra from the stack */
-#ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_L	t0, PT_R12(sp)	/* load the original t0 from the stack */
-#endif
-#else
+#ifndef CONFIG_DYNAMIC_FTRACE
 	MCOUNT_SAVE_REGS
-	move	a1, ra		/* arg2: next ip, selfaddr */
 #endif
 
+	/* arg1: Get the location of the parent's return address */
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	bnez	t0, 1f		/* non-leaf func: t0 saved the location of the return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a0, PT_R12(sp)
+#else
+	move	a0, MCOUNT_RA_ADDRESS_REG
+#endif
+	bnez	a0, 1f	/* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
 	 nop
-	PTR_LA	t0, PT_R1(sp)	/* leaf func: get the location of at(old ra) from our own stack */
-1:	move	a0, t0		/* arg1: the location of the return address */
+#endif
+	PTR_LA	a0, PT_R1(sp)	/* leaf func: the location in current stack */
+1:
+
+	/* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)
 #else
-	PTR_LA	a0, PT_R1(sp)	/* arg1: &AT -> a0 */
+	move	a1, ra
 #endif
-	jal	prepare_ftrace_return
+
+	/* arg3: Get frame pointer of current stack */
 #ifdef CONFIG_FRAME_POINTER
-	 move	a2, fp		/* arg3: frame pointer */
-#else
+	 move	a2, fp
+#else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
 	 PTR_LA	a2, PT_SIZE(sp)
 #else
@@ -163,6 +174,8 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
 #endif
 #endif
 
+	jal	prepare_ftrace_return
+	 nop
 	MCOUNT_RESTORE_REGS
 	RETURN_BACK
 	END(ftrace_graph_caller)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index f5981c49910..2340f11dc29 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 #include <linux/cpu.h>
+#include <linux/cpuset.h>
 #include <linux/cpumask.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -39,6 +40,21 @@ static inline struct task_struct *find_process_by_pid(pid_t pid)
 	return pid ? find_task_by_vpid(pid) : current;
 }
 
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+	const struct cred *cred = current_cred(), *pcred;
+	bool match;
+
+	rcu_read_lock();
+	pcred = __task_cred(p);
+	match = (cred->euid == pcred->euid ||
+		 cred->euid == pcred->uid);
+	rcu_read_unlock();
+	return match;
+}
 
 /*
  * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
@@ -46,12 +62,10 @@ static inline struct task_struct *find_process_by_pid(pid_t pid)
 asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 				      unsigned long __user *user_mask_ptr)
 {
-	cpumask_t new_mask;
-	cpumask_t effective_mask;
-	int retval;
-	struct task_struct *p;
+	cpumask_var_t cpus_allowed, new_mask, effective_mask;
 	struct thread_info *ti;
-	uid_t euid;
+	struct task_struct *p;
+	int retval;
 
 	if (len < sizeof(new_mask))
 		return -EINVAL;
@@ -60,53 +74,74 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 		return -EFAULT;
 
 	get_online_cpus();
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 
 	p = find_process_by_pid(pid);
 	if (!p) {
-		read_unlock(&tasklist_lock);
+		rcu_read_unlock();
 		put_online_cpus();
 		return -ESRCH;
 	}
 
-	/*
-	 * It is not safe to call set_cpus_allowed with the
-	 * tasklist_lock held.  We will bump the task_struct's
-	 * usage count and drop tasklist_lock before invoking
-	 * set_cpus_allowed.
-	 */
+	/* Prevent p going away */
 	get_task_struct(p);
+	rcu_read_unlock();
 
-	euid = current_euid();
+	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_put_task;
+	}
+	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_cpus_allowed;
+	}
+	if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_new_mask;
+	}
 	retval = -EPERM;
-	if (euid != p->cred->euid && euid != p->cred->uid &&
-	    !capable(CAP_SYS_NICE)) {
-		read_unlock(&tasklist_lock);
+	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
 		goto out_unlock;
-	}
 
 	retval = security_task_setscheduler(p, 0, NULL);
 	if (retval)
 		goto out_unlock;
 
 	/* Record new user-specified CPU set for future reference */
-	p->thread.user_cpus_allowed = new_mask;
-
-	/* Unlock the task list */
-	read_unlock(&tasklist_lock);
+	cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
 
+ again:
 	/* Compute new global allowed CPU set if necessary */
 	ti = task_thread_info(p);
 	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
-	    cpus_intersects(new_mask, mt_fpu_cpumask)) {
-		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed_ptr(p, &effective_mask);
+	    cpus_intersects(*new_mask, mt_fpu_cpumask)) {
+		cpus_and(*effective_mask, *new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed_ptr(p, effective_mask);
 	} else {
+		cpumask_copy(effective_mask, new_mask);
 		clear_ti_thread_flag(ti, TIF_FPUBOUND);
-		retval = set_cpus_allowed_ptr(p, &new_mask);
+		retval = set_cpus_allowed_ptr(p, new_mask);
 	}
 
+	if (!retval) {
+		cpuset_cpus_allowed(p, cpus_allowed);
+		if (!cpumask_subset(effective_mask, cpus_allowed)) {
+			/*
+			 * We must have raced with a concurrent cpuset
+			 * update. Just reset the cpus_allowed to the
+			 * cpuset's cpus_allowed
+			 */
+			cpumask_copy(new_mask, cpus_allowed);
+			goto again;
+		}
+	}
 out_unlock:
+	free_cpumask_var(effective_mask);
+out_free_new_mask:
+	free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+	free_cpumask_var(cpus_allowed);
+out_put_task:
 	put_task_struct(p);
 	put_online_cpus();
 	return retval;
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a5297e2a353..a4faceea9d8 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -419,4 +419,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
+	PTR     sys_getdents
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 8bdd6a663c7..852780868fb 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -976,7 +976,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 	case 2:
 		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
-		break;
+		return;
 
 	case 3:
 		break;
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index b773c1112b1..e5cdfd603f8 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -61,11 +61,9 @@ static int __init init_vdso(void)
 
 	vunmap(vdso);
 
-	pr_notice("init_vdso successfull\n");
-
 	return 0;
 }
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
 
 static unsigned long vdso_addr(unsigned long start)
 {
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
index efb95f2609c..e0ecda92c40 100644
--- a/arch/mips/lasat/image/head.S
+++ b/arch/mips/lasat/image/head.S
@@ -1,7 +1,7 @@
 #include <asm/lasat/head.h>
 
 	.text
-	.section .text.start, "ax"
+	.section .text..start, "ax"
 	.set noreorder
 	.set mips3
 
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
index 988f8ad189c..0864c963e18 100644
--- a/arch/mips/lasat/image/romscript.normal
+++ b/arch/mips/lasat/image/romscript.normal
@@ -4,7 +4,7 @@ SECTIONS
 {
   .text :
   {
-    *(.text.start)
+    *(.text..start)
   }
 
   /* Data in ROM */
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 3df1967dea0..c97ca69b94e 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -23,6 +23,7 @@ config LEMOTE_FULOONG2E
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
+	select LOONGSON_MC146818
 	help
 	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
@@ -51,6 +52,7 @@ config LEMOTE_MACH2F
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
 	help
 	  Lemote Loongson 2F family machines utilize the 2F revision of
 	  Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@ config LOONGSON_UART_BASE
 	bool
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index cdd2e812ba1..e526488df65 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_SERIAL_8250) += serial.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
 # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index eaf8b86e331..5b5cbba699b 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -49,6 +49,8 @@ void pci_ehci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_EHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 9a96b5664c7..681d1291a2c 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -51,6 +51,7 @@ void pci_ide_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_IDE_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if (value & 0x01) {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
 			lo = (value & 0xfffffff0) | 0x1;
 			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
 
@@ -65,19 +66,30 @@ void pci_ide_write_reg(int reg, u32 value)
 			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
 			lo |= 0x01;
 			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+			lo = value;
 			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		}
 		break;
 	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
 		break;
 	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
 		break;
 	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
 		break;
 	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
 		break;
 	default:
@@ -167,6 +179,7 @@ u32 pci_ide_read_reg(int reg)
 	case PCI_IDE_ETC_REG:
 		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
 		conf_data = lo;
+		break;
 	case PCI_IDE_PM_REG:
 		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
 		conf_data = lo;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index f5c0818831b..4d9f65abeaf 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -61,7 +61,7 @@ static void divil_lbar_enable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
@@ -76,7 +76,7 @@ static void divil_lbar_disable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index db5900aadd6..bdedf512baf 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -49,6 +49,8 @@ void pci_ohci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_OHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
new file mode 100644
index 00000000000..a90d87c0155
--- /dev/null
+++ b/arch/mips/loongson/common/rtc.c
@@ -0,0 +1,43 @@
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index d9ae1dbabda..b90974246e5 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -78,6 +78,7 @@ ieee754dp ieee754dp_abs(ieee754dp x)
 	DPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
 	}
 
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index 3175477d36f..2fd53c920e9 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -78,6 +78,7 @@ ieee754sp ieee754sp_abs(ieee754sp x)
 	SPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
 	}
 
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2fbfa1a8c3a..bf80921f2f5 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -247,6 +247,8 @@ void __init mips_pcibios_init(void)
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
+	controller->io_map_base = mips_io_port_base;
+
 	register_pci_controller(controller);
 }
 
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
index eee4f3dfc41..98e86ddb86c 100644
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ b/arch/mips/nxp/pnx8550/common/pci.c
@@ -44,6 +44,7 @@ extern struct pci_ops pnx8550_pci_ops;
 
 static struct pci_controller pnx8550_controller = {
 	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
 };
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 2aed50fef10..64246c9c875 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -113,7 +113,7 @@ void __init plat_mem_setup(void)
 	PNX8550_GLB2_ENAB_INTA_O = 0;
 
 	/* IO/MEM resources. */
-	set_io_port_base(KSEG1);
+	set_io_port_base(PNX8550_PORT_BASE);
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 	iomem_resource.start = 0;
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index d0d24e04767..60d3ea60211 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -43,6 +43,12 @@ static struct loongson2_register_config {
 static char *oprofid = "LoongsonPerf";
 static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
 
+static void reset_counters(void *arg)
+{
+	write_c0_perfctrl(0);
+	write_c0_perfcnt(0);
+}
+
 static void loongson2_reg_setup(struct op_counter_config *cfg)
 {
 	unsigned int ctrl = 0;
@@ -139,7 +145,7 @@ static int __init loongson2_init(void)
 
 static void loongson2_exit(void)
 {
-	write_c0_perfctrl(0);
+	reset_counters(NULL);
 	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
 }
 
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 04b31478a6d..b7c03d80c88 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -944,6 +944,7 @@ static struct pci_controller msp_pci_controller = {
 	.pci_ops	= &msp_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0,
+	.io_map_base	= MSP_PCI_IOSPACE_BASE,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0
 };
diff --git a/arch/mips/pci/pci-yosemite.c b/arch/mips/pci/pci-yosemite.c
index 0357946f30e..cf5e1a25cb7 100644
--- a/arch/mips/pci/pci-yosemite.c
+++ b/arch/mips/pci/pci-yosemite.c
@@ -54,6 +54,7 @@ static int __init pmc_yosemite_setup(void)
 		panic(ioremap_failed);
 
 	set_io_port_base(io_v_base);
+	py_controller.io_map_base = io_v_base;
 	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
 
 	ioport_resource.end = TITAN_IO_SIZE - 1;
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 8ee77887306..9ec523e4dd0 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -472,6 +472,9 @@ void __init configure_platform(void)
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
 		chipversion  = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@ void __init configure_platform(void)
 		else
 			asic = ASIC_CRONUSLITE;
 
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 53bb17d0f06..81f153fa51b 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -338,11 +338,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	monitor_signal(regs);
-	printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
-	if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
-		do_exit(SIGKILL);
-	goto no_context;
+	if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index d6119b879a9..45b40ac6c46 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -117,6 +117,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range. */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index 32c2cca7434..45effe6978f 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -28,7 +28,7 @@
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index 4653c77bf9d..2ab4af58ecb 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -174,7 +174,7 @@ static inline void set_eiem(unsigned long val)
 })
 
 #ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
 #endif
 
 #define arch_align_stack(x) (x)
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 4c247e02d9b..df971fa0c32 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -1123,7 +1123,6 @@ static char __attribute__((aligned(64))) iodc_dbuf[4096];
  */
 int pdc_iodc_print(const unsigned char *str, unsigned count)
 {
-	static int posx;        /* for simple TAB-Simulation... */
 	unsigned int i;
 	unsigned long flags;
 
@@ -1133,19 +1132,12 @@ int pdc_iodc_print(const unsigned char *str, unsigned count)
 			iodc_dbuf[i+0] = '\r';
 			iodc_dbuf[i+1] = '\n';
 			i += 2;
-			posx = 0;
 			goto print;
-		case '\t':
-			while (posx & 7) {
-				iodc_dbuf[i] = ' ';
-				i++, posx++;
-			}
-			break;
 		case '\b':	/* BS */
-			posx -= 2;
+			i--; /* overwrite last */
 		default:
 			iodc_dbuf[i] = str[i];
-			i++, posx++;
+			i++;
 			break;
 		}
 	}
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 0e3d9f9b9e3..4dbdf0ed6fa 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -345,7 +345,7 @@ smp_slave_stext:
 ENDPROC(stext)
 
 #ifndef CONFIG_64BIT
-	.section .data.read_mostly
+	.section .data..read_mostly
 
 	.align	4
 	.export	$global$,data
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index d020eae6525..4a91e433416 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -53,11 +53,11 @@ union thread_union init_thread_union __init_task_data
  * guarantee that global objects will be laid out in memory in the same order 
  * as the order of declaration, so put these in different sections and use
  * the linker script to order them. */
-pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE)));
+pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data..vm0.pmd"), aligned(PAGE_SIZE)));
 #endif
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE)));
-pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE)));
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data..vm0.pgd"), aligned(PAGE_SIZE)));
+pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pte"), aligned(PAGE_SIZE)));
 
 /*
  * Initial task structure.
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 9dab4a4e09f..d64a6bbec2a 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -94,8 +94,8 @@ SECTIONS
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
-	.data.lock_aligned : {
-		*(.data.lock_aligned)
+	.data..lock_aligned : {
+		*(.data..lock_aligned)
 	}
 
 	/* End of data section */
@@ -105,10 +105,10 @@ SECTIONS
 	__bss_start = .;
 	/* page table entries need to be PAGE_SIZE aligned */
 	. = ALIGN(PAGE_SIZE);
-	.data.vmpages : {
-		*(.data.vm0.pmd)
-		*(.data.vm0.pgd)
-		*(.data.vm0.pte)
+	.data..vmpages : {
+		*(.data..vm0.pmd)
+		*(.data..vm0.pgd)
+		*(.data..vm0.pte)
 	}
 	.bss : {
 		*(.bss)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a315e06dc..2031a284686 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -132,7 +132,7 @@ config PPC
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -351,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on PPC_BOOK3S && EXPERIMENTAL
+	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -400,7 +400,7 @@ config IRQ_ALL_CPUS
 
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
-	default y
+	default n
 	help
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
@@ -409,7 +409,7 @@ config SPARSE_IRQ
 	  ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
 	    out the irq_desc[] array in a more NUMA-friendly way. )
 
-	  If you don't know what to do here, say Y.
+	  If you don't know what to do here, say N.
 
 config NUMA
 	bool "NUMA support"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 53696da4518..2d38a50e66b 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -135,13 +135,6 @@ config DEBUGGER
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 1a54a3b3a3f..77cfe7a29e2 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -92,10 +92,10 @@ endif
 else
 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
-else
-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
 endif
 
+LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+
 ifeq ($(CONFIG_TUNE_CELL),y)
 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
 endif
@@ -112,6 +112,11 @@ KBUILD_CFLAGS += $(call cc-option,-mspe=no)
 # kernel considerably.
 KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
 
+# FIXME: the module load should be taught about the additional relocs
+# generated by this.
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Never use string load/store instructions as they are
 # often slow when they are implemented at all
 KBUILD_CFLAGS		+= -mno-string
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 27db8938827..9d3bd4c45a2 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -519,7 +519,7 @@ void ibm440ep_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@ void ibm440gx_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
 }
@@ -543,10 +543,10 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
-	eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+	/* serial clocks need fixup based on int/ext */
+	eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
 }
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ad0df7d0a64..fae8192c8fc 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -141,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446cbd2..00000000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 00000000000..abcd0caecca
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "stm,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8cf2c0c88c0..7c3be5e4574 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -44,6 +44,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b13bc3..179a1785d64 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63be3a8..59702ace900 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4173af387c6..0f526245268 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -20,10 +20,8 @@
 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
-/*
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
-*/
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
@@ -254,7 +252,6 @@
 			};
 		};
 
-/* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -310,7 +307,6 @@
 				};
 			};
 		};
- */
 
 		serial0: serial@4500 {
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 5bd1011fde9..3375c2ab0c3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -215,6 +215,18 @@
 			clock-frequency = <0>;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
 			reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
 			protected-sources = <
 			31 32 33 37 38 39       /* enet2 enet3 */
 			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe0 0xe1 0xe2 0xe3     /* msi */
-			0xe4 0xe5 0xe6 0xe7
+			0xe4 0xe5 0xe6 0xe7	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 0efc3456e29..e7b477f6a3f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -154,12 +154,8 @@
 		msi@41600 {
 			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
 			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
+			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
 				0xe4 0
 				0xe5 0
 				0xe6 0
@@ -190,6 +186,7 @@
 			0x1 0x2 0x3 0x4         /* pci slot */
 			0x9 0xa 0xb 0xc         /* usb */
 			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 00000000000..7fad2df2598
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index d2af32e2bf7..81636c01d90 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -234,10 +234,132 @@
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
 	};
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 8e95f8d227b..4aa17b676a3 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 918f23fd2b1..9a5f1ab777e 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index f87ef038228..0b452135d1d 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 19fbcb07537..4d2de0bed60 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index eb41cd69597..a1f3f505e4a 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 416e79ac071..c7631357714 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index bfff0eae39d..6597b2f1d1a 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1f6d0490e28..2d3dfb55fbe 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 788faac6c27..51a00c46df1 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 4ef8bcab61f..1028b1bfb60 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index ca17b1496e3..69f5633cbd4 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index e3149bade0b..dcd859c8b4a 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
new file mode 100644
index 00000000000..277f88c2750
--- /dev/null
+++ b/arch/powerpc/configs/44x/icon_defconfig
@@ -0,0 +1,1451 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Fri May 21 17:40:22 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ICON=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_440SPe=y
+CONFIG_STDBINUTILS=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
+# CONFIG_DISPLAY_PDSP1880 is not set
+# CONFIG_MUCMC52_IO is not set
+# CONFIG_UC101_IO is not set
+# CONFIG_SRAM is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index af244e1d255..a2c24d1e051 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 8fed3b26af2..3bb55b57077 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index a67ec91a28c..684f40dc8a4 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 886cb6aa643..e202924e617 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 1b2f41dbcaf..c348a4662a9 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 12041d355b8..f4cb7e84cb8 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 2518b8568c7..c7ead0ec00b 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -80,8 +80,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 218d49b36a0..7664c83c17c 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 90492ff2523..eac7c17eef3 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -96,8 +96,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index dffc8cac825..27afb6ecdf6 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 3cb2a522046..5fe39ddb4e1 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 96181c62abf..a108b84c007 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 183c59c6d89..b728a7d6425 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 1524d948a2b..8e738de5f6a 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 767c204c060..59bf9e27d7f 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 55b9e4e867a..4e8b01e7324 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 1be38eb0578..20fde6374aa 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a6300945732..74f714d8593 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -102,8 +102,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 9f89d5c9c0b..a670cee255b 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -92,8 +92,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index b63cc38df6b..851287e78fc 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -87,8 +87,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 4ab6074db3c..b429a655b54 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -102,8 +102,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c6d2baa7aae..94337195431 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -83,8 +83,7 @@ CONFIG_CPUSETS=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index d2123779512..6be6c09eba6 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -78,8 +78,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5094a65a449..2fdab660fce 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 81e904e9f39..6b708395a7c 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c5af46ef5f4..1cee889dd9e 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -91,8 +91,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 826a65d3f00..57d3ffa3026 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -82,8 +82,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 942e1193e9e..1c2dbf07ac3 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a211a79959c..a60d61bee48 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -73,7 +73,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 76982c51a4c..151c8e14f3a 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -81,8 +81,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 588a2add393..8ecacf74d3e 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -97,8 +97,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b244003b9e..dc50eec58e7 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -78,8 +78,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 0cbd56fe2e1..b36ebb7e843 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index c1be2615102..0dd5015ea81 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -90,8 +90,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index a04727295d4..aa2654e6ede 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7012ac0134f..f875ec21c91 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 27c63ceeb45..b1e88fe1d9f 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 20ba0cfff8b..74a7216183e 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=64
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8870a3448..753bb7912e2 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -93,8 +93,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 35b60683cde..afb4d1bb2ba 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -99,8 +99,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 46f5c47e9f8..bd3d23fb4dd 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index dad617e2a88..369f4e02c5d 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -93,8 +93,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 8195f1650cb..403e82e2e83 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -107,8 +107,7 @@ CONFIG_CPUSETS=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 68c175ea427..12c8ee8dd12 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 93f4505b5ac..a18f597c6e5 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 16a14589bd4..16ae717d195 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -92,8 +92,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b1625801526..01be0e207f4 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index c386828c639..ee054f8118b 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5a828..9a846efe638 100644
--- a/arch/powerpc/include/asm/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -12,7 +12,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/types.h>
 #include <asm/page.h>
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 725634fc18c..4b509411ad8 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -42,7 +42,7 @@ extern struct ppc64_caches ppc64_caches;
 #endif /* __powerpc64__ && ! __ASSEMBLY__ */
 
 #if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb977ba..e50323fe941 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
 #include <linux/of.h>
 
 /*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
+/*
  * USB Controller pram common to QE and CPM.
  */
 struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b01192f44..bd07650dca5 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e3cba4e1eb3..b0b21134f61 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -70,6 +70,7 @@ struct pt_regs;
 extern int machine_check_generic(struct pt_regs *regs);
 extern int machine_check_4xx(struct pt_regs *regs);
 extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
 extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
 extern int machine_check_47x(struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054baef184..ecba37a9174 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -358,7 +358,6 @@ extern void exc_lvl_ctx_init(void);
 #define exc_lvl_ctx_init()
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
@@ -369,11 +368,6 @@ extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
 extern void do_IRQ(struct pt_regs *regs);
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index 5ebfe5d3c61..6857af58b02 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -3,8 +3,17 @@
 
 #include <asm/page.h>
 
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE	0x4000000
+#else
 #define KDUMP_KERNELBASE	0x2000000
+#endif
 
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index a6ca6da1430..076327f2eff 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,6 +2,18 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_FSL_BOOKE
+
+/*
+ * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
+ * and therefore we can only deal with memory within this range
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+
+#else
+
 /*
  * Maximum page that is mapped directly into kernel memory.
  * XXX: Since we copy virt we can use any page we allocate
@@ -21,6 +33,7 @@
 /* TASK_SIZE, probably left over from use_mm ?? */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 #endif
+#endif
 
 #define KEXEC_CONTROL_PAGE_SIZE 4096
 
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 6f74d93725a..8274a2d4392 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -115,7 +115,15 @@ extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
 extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte);
 extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
 extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
-extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
+
+extern void kvmppc_mmu_hpte_cache_map(struct kvm_vcpu *vcpu, struct hpte_cache *pte);
+extern struct hpte_cache *kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_hpte_destroy(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_hpte_init(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte);
+extern int kvmppc_mmu_hpte_sysinit(void);
+extern void kvmppc_mmu_hpte_sysexit(void);
+
 extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
diff --git a/arch/powerpc/include/asm/kvm_fpu.h b/arch/powerpc/include/asm/kvm_fpu.h
index 94f05de9ad0..c3d4f0518a6 100644
--- a/arch/powerpc/include/asm/kvm_fpu.h
+++ b/arch/powerpc/include/asm/kvm_fpu.h
@@ -22,24 +22,24 @@
 
 #include <linux/types.h>
 
-extern void fps_fres(struct thread_struct *t, u32 *dst, u32 *src1);
-extern void fps_frsqrte(struct thread_struct *t, u32 *dst, u32 *src1);
-extern void fps_fsqrts(struct thread_struct *t, u32 *dst, u32 *src1);
+extern void fps_fres(u64 *fpscr, u32 *dst, u32 *src1);
+extern void fps_frsqrte(u64 *fpscr, u32 *dst, u32 *src1);
+extern void fps_fsqrts(u64 *fpscr, u32 *dst, u32 *src1);
 
-extern void fps_fadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
-extern void fps_fdivs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
-extern void fps_fmuls(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
-extern void fps_fsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fdivs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fmuls(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2);
 
-extern void fps_fmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+extern void fps_fmadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2,
 		       u32 *src3);
-extern void fps_fmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+extern void fps_fmsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2,
 		       u32 *src3);
-extern void fps_fnmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+extern void fps_fnmadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2,
 		        u32 *src3);
-extern void fps_fnmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+extern void fps_fnmsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2,
 		        u32 *src3);
-extern void fps_fsel(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+extern void fps_fsel(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2,
 		     u32 *src3);
 
 #define FPD_ONE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
@@ -82,4 +82,7 @@ FPD_THREE_IN(fmadd)
 FPD_THREE_IN(fnmsub)
 FPD_THREE_IN(fnmadd)
 
+extern void kvm_cvt_fd(u32 *from, u64 *to, u64 *fpscr);
+extern void kvm_cvt_df(u64 *from, u32 *to, u64 *fpscr);
+
 #endif
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 0c9ad869dec..b0b23c007d6 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -35,10 +35,17 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 
 /* We don't currently support large pages. */
+#define KVM_HPAGE_GFN_SHIFT(x)	0
 #define KVM_NR_PAGE_SIZES	1
 #define KVM_PAGES_PER_HPAGE(x)	(1UL<<31)
 
-#define HPTEG_CACHE_NUM 1024
+#define HPTEG_CACHE_NUM			(1 << 15)
+#define HPTEG_HASH_BITS_PTE		13
+#define HPTEG_HASH_BITS_VPTE		13
+#define HPTEG_HASH_BITS_VPTE_LONG	5
+#define HPTEG_HASH_NUM_PTE		(1 << HPTEG_HASH_BITS_PTE)
+#define HPTEG_HASH_NUM_VPTE		(1 << HPTEG_HASH_BITS_VPTE)
+#define HPTEG_HASH_NUM_VPTE_LONG	(1 << HPTEG_HASH_BITS_VPTE_LONG)
 
 struct kvm;
 struct kvm_run;
@@ -151,6 +158,9 @@ struct kvmppc_mmu {
 };
 
 struct hpte_cache {
+	struct hlist_node list_pte;
+	struct hlist_node list_vpte;
+	struct hlist_node list_vpte_long;
 	u64 host_va;
 	u64 pfn;
 	ulong slot;
@@ -282,8 +292,10 @@ struct kvm_vcpu_arch {
 	unsigned long pending_exceptions;
 
 #ifdef CONFIG_PPC_BOOK3S
-	struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
-	int hpte_cache_offset;
+	struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
+	struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
+	struct hlist_head hpte_hash_vpte_long[HPTEG_HASH_NUM_VPTE_LONG];
+	int hpte_cache_count;
 #endif
 };
 
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
deleted file mode 100644
index 6f5fdf0a19a..00000000000
--- a/arch/powerpc/include/asm/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index 19a661b4cb9..675e159b5ef 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -123,10 +123,6 @@ static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
  */
 struct macio_driver
 {
-	char			*name;
-	struct of_device_id	*match_table;
-	struct module		*owner;
-
 	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
 	int	(*remove)(struct macio_dev* dev);
 
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
new file mode 100644
index 00000000000..3c29728b56b
--- /dev/null
+++ b/arch/powerpc/include/asm/memblock.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2102b214a87..0e398cfee2c 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -250,7 +250,9 @@ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+			       unsigned long vsid, unsigned long trap,
+			       int ssize, int psize, unsigned long pte);
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index bfc4e027e2a..358ff14ea25 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -162,14 +162,6 @@ do {						\
 
 #endif /* !CONFIG_HUGETLB_PAGE */
 
-#ifdef MODULE
-#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
-#else
-#define __page_aligned \
-	__attribute__((__aligned__(PAGE_SIZE), \
-		__section__(".data.page_aligned")))
-#endif
-
 #define VM_DATA_DEFAULT_FLAGS \
 	(test_thread_flag(TIF_32BIT) ? \
 	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 5d8be041622..0175a676b34 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -24,11 +24,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __KERNEL__
 #include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
 
 #ifndef __ASSEMBLY__
 
@@ -364,13 +360,13 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 #ifndef __ASSEMBLY__
 
 struct ppc_debug_info {
-	uint32_t version;		/* Only version 1 exists to date */
-	uint32_t num_instruction_bps;
-	uint32_t num_data_bps;
-	uint32_t num_condition_regs;
-	uint32_t data_bp_alignment;
-	uint32_t sizeof_condition;	/* size of the DVC register */
-	uint64_t features;
+	__u32 version;			/* Only version 1 exists to date */
+	__u32 num_instruction_bps;
+	__u32 num_data_bps;
+	__u32 num_condition_regs;
+	__u32 data_bp_alignment;
+	__u32 sizeof_condition;		/* size of the DVC register */
+	__u64 features;
 };
 
 #endif /* __ASSEMBLY__ */
@@ -386,13 +382,13 @@ struct ppc_debug_info {
 #ifndef __ASSEMBLY__
 
 struct ppc_hw_breakpoint {
-	uint32_t version;		/* currently, version must be 1 */
-	uint32_t trigger_type;		/* only some combinations allowed */
-	uint32_t addr_mode;		/* address match mode */
-	uint32_t condition_mode;	/* break/watchpoint condition flags */
-	uint64_t addr;			/* break/watchpoint address */
-	uint64_t addr2;			/* range end or mask */
-	uint64_t condition_value;	/* contents of the DVC register */
+	__u32 version;		/* currently, version must be 1 */
+	__u32 trigger_type;	/* only some combinations allowed */
+	__u32 addr_mode;	/* address match mode */
+	__u32 condition_mode;	/* break/watchpoint condition flags */
+	__u64 addr;		/* break/watchpoint address */
+	__u64 addr2;		/* range end or mask */
+	__u64 condition_value;	/* contents of the DVC register */
 };
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 5304a37ba42..2360317179a 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -4,6 +4,12 @@
  * are not true Book E PowerPCs, they borrowed a number of features
  * before Book E was finalized, and are included here as well.  Unfortunatly,
  * they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  */
 #ifdef __KERNEL__
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
 #define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
 #define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
 #define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU	0x239	/* Machine Check Address Register Upper */
 #define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
 #define SPRN_MCSR	0x23C	/* Machine Check Status Register */
@@ -196,8 +203,11 @@
 #define PPC47x_MCSR_IPR	0x00400000 /* Imprecise Machine Check Exception */
 
 #ifdef CONFIG_E500
+/* All e500 */
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
 #define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
 #define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
 #define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
@@ -209,12 +219,20 @@
 #define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
 #define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
 
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC	0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT	0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI	0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV	0x00080000UL /* MCAR address valid */
+#define MCSR_MEA	0x00040000UL /* MCAR is effective address */
+#define MCSR_IF		0x00010000UL /* Instruction Fetch */
+#define MCSR_LD		0x00008000UL /* Load */
+#define MCSR_ST		0x00004000UL /* Store */
+#define MCSR_LDG	0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC	0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR	0x00000001UL /* Backside L2 cache error */
 #endif
+
 #ifdef CONFIG_E200
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
@@ -225,11 +243,6 @@
 #define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
 #define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
 					store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-			MCSR_BUS_WRERR)
 #endif
 
 /* Bit definitions for the DBSR. */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 877326320e7..58d0572de6f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -57,8 +57,12 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
-				   swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
+ifeq ($(CONFIG_FSL_BOOKE),y)
+obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
+else
+obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
+endif
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 26e58630ed7..625942ae558 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9556be903e9..87aa0f3c604 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1840,7 +1840,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
-		.machine_check		= machine_check_e500,
+		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
 	},
 	{	/* default match */
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 8c066d6a8e4..417f7b05a9c 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -163,6 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 }
 
 /* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#ifdef CONFIG_PPC_STD_MMU_64
 static void crash_kexec_wait_realmode(int cpu)
 {
 	unsigned int msecs;
@@ -187,6 +188,7 @@ static void crash_kexec_wait_realmode(int cpu)
 	}
 	mb();
 }
+#endif
 
 /*
  * This function will be called by secondary cpus or by kexec cpu
@@ -445,7 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
 	crash_kexec_stop_spus();
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
 	crash_kexec_wait_realmode(crashing_cpu);
+#endif
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 0);
 }
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 5fb667a6089..40f524643ba 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,7 +13,7 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -33,7 +33,7 @@ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 #ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
 }
 
 static void __init create_trampoline(unsigned long addr)
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e7fe218b869..02f724f3675 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -71,7 +71,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 8d1de6f31d5..84d6367ec00 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -9,7 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -89,7 +89,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask)
 	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= (lmb_end_of_DRAM() - 1);
+	return mask >= (memblock_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
new file mode 100644
index 00000000000..a92c79be272
--- /dev/null
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -0,0 +1,235 @@
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	match_TLB			/* skip if NPIDS != 3 */
+
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li	r6,0x04
+	tlbivax 0,r6
+	TLBSYNC
+	/* Invalidate TLB1 */
+	li	r6,0x0c
+	tlbivax 0,r6
+	TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,31
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,(2f - 1b)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+2:
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID0,r6
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	2f				/* skip if NPIDS != 3 */
+
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+#if defined(ENTRY_MAPPING_BOOT_SETUP)
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r6
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	mtspr	SPRN_MAS2,r6
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r6,(KERNELBASE & ~0xfff)@h
+	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+
+#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
+/*
+ * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
+ * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
+ * will cover the first 2GiB of memory.
+ */
+
+	lis r10, (MAS1_VALID|MAS1_IPROT)@h
+	ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
+	li  r11, 0
+	li  r0, 8
+	mtctr   r0
+
+next_tlb_setup:
+	addi	r0, r11, 3
+	rlwinm  r0, r0, 16, 4, 15  // Compute esel
+	rlwinm  r9, r11, 28, 0, 3   // Compute [ER]PN
+	oris    r0, r0, (MAS0_TLBSEL(1))@h
+	mtspr   SPRN_MAS0,r0
+	mtspr   SPRN_MAS1,r10
+	mtspr   SPRN_MAS2,r9
+	ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr   SPRN_MAS3,r9
+	tlbwe
+	addi    r11, r11, 1
+	bdnz+   next_tlb_setup
+
+/* 7. Jump to our 1:1 mapping */
+	mr	r6, r25
+#else
+	#error You need to specify the mapping or not use this at all.
+#endif
+
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,(2f - 1b)
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r8,SPRN_MAS1
+	rlwinm	r8,r8,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index edd4a57fd29..4faeba24785 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -94,204 +94,10 @@ _ENTRY(_start);
  */
 
 _ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	match_TLB			/* skip if NPIDS != 3 */
-
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li	r6,0x04
-	tlbivax 0,r6
-	TLBSYNC
-	/* Invalidate TLB1 */
-	li	r6,0x0c
-	tlbivax 0,r6
-	TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
-	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
-	addi	r5, r5, 0x1
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* grab and fixup the RPN */
-	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
-	rlwinm	r6,r6,25,27,31
-	li	r8,-1
-	addi	r6,r6,10
-	slw	r6,r8,r6	/* convert to mask */
-
-	bl	1f		/* Find our address */
-1:	mflr	r7
-
-	mfspr	r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
-	mfspr	r23,SPRN_MAS7
-#endif
-	and	r8,r6,r8
-	subfic	r9,r6,-4096
-	and	r9,r9,r7
-
-	or	r25,r8,r9
-	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,(2f - 1b)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
-2:
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr   SPRN_MAS6,r6
-	mtspr	SPRN_PID0,r6
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	2f				/* skip if NPIDS != 3 */
 
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
-#else
-#define M_IF_SMP	0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
-	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
-	mtspr	SPRN_MAS2,r6
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r6,(KERNELBASE & ~0xfff)@h
-	ori	r6,r6,(KERNELBASE & ~0xfff)@l
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,(2f - 1b)
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r8,SPRN_MAS1
-	rlwinm	r8,r8,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r8
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
+#define ENTRY_MAPPING_BOOT_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_BOOT_SETUP
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 30817d9b20c..77be3d058a6 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -295,7 +295,10 @@ void fixup_irqs(const struct cpumask *map)
 
 	for_each_irq(irq) {
 		desc = irq_to_desc(irq);
-		if (desc && desc->status & IRQ_PER_CPU)
+		if (!desc)
+			continue;
+
+		if (desc->status & IRQ_PER_CPU)
 			continue;
 
 		cpumask_and(mask, desc->affinity, map);
@@ -317,7 +320,6 @@ void fixup_irqs(const struct cpumask *map)
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 static inline void handle_one_irq(unsigned int irq)
 {
 	struct thread_info *curtp, *irqtp;
@@ -358,12 +360,6 @@ static inline void handle_one_irq(unsigned int irq)
 	if (irqtp->flags)
 		set_bits(irqtp->flags, &curtp->flags);
 }
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
-	generic_handle_irq(irq);
-}
-#endif
 
 static inline void check_stack_overflow(void)
 {
@@ -455,7 +451,6 @@ void exc_lvl_ctx_init(void)
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
@@ -492,10 +487,6 @@ static inline void do_softirq_onstack(void)
 	irqtp->task = NULL;
 }
 
-#else
-#define do_softirq_onstack()	__do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
 void do_softirq(void)
 {
 	unsigned long flags;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c533525ca56..bc47352deb1 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -378,17 +378,6 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
  * single-stepped a copy of the instruction.  The address of this
  * copy is p->ainsn.insn.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
-{
-	int ret;
-	unsigned int insn = *p->ainsn.insn;
-
-	regs->nip = (unsigned long)p->addr;
-	ret = emulate_step(regs, insn);
-	if (ret == 0)
-		regs->nip = (unsigned long)p->addr + 4;
-}
-
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
@@ -406,7 +395,8 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(cur, regs);
+	/* Adjust nip to after the single-stepped instruction */
+	regs->nip = (unsigned long)cur->addr + 4;
 	regs->msr |= kcb->kprobe_saved_msr;
 
 	/*Restore back the original saved kprobes variables and continue. */
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index bb3d893a835..89f005116aa 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,7 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -66,11 +66,11 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -133,9 +133,9 @@ void __init reserve_crashkernel(void)
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(lmb_phys_mem_size() >> 20));
+			(unsigned long)(memblock_phys_mem_size() >> 20));
 
-	lmb_reserve(crashk_res.start, crash_size);
+	memblock_reserve(crashk_res.start, crash_size);
 }
 
 int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26f9900f773..ed31a29c4ff 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -182,28 +182,12 @@ static void kexec_prepare_cpus_wait(int wait_state)
 
 	my_cpu = get_cpu();
 	/* Make sure each CPU has atleast made it to the state we need */
-	for (i=0; i < NR_CPUS; i++) {
+	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
 
 		while (paca[i].kexec_state < wait_state) {
 			barrier();
-			if (!cpu_possible(i)) {
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" possible, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
-			if (!cpu_online(i)) {
-				/* Fixme: this can be spinning in
-				 * pSeries_secondary_wait with a paca
-				 * waiting for it to go online.
-				 */
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" online, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
 			if (i != notified) {
 				printk( "kexec: waiting for cpu %d (physical"
 						" %d) to enter %i state\n",
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8043d1b73cf..6bbd7a604d2 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -33,7 +33,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
@@ -56,7 +55,6 @@ _GLOBAL(call_handle_irq)
 	lwz	r0,4(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 /*
  * This returns the high 64 bits of the product of two 64-bit numbers.
@@ -711,6 +709,22 @@ relocate_new_kernel:
 	/* r4 = reboot_code_buffer */
 	/* r5 = start_address      */
 
+#ifdef CONFIG_FSL_BOOKE
+
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+#define ENTRY_MAPPING_KEXEC_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_KEXEC_SETUP
+
+	mr      r3, r29
+	mr      r4, r30
+	mr      r5, r31
+
+	li	r0, 0
+#else
 	li	r0, 0
 
 	/*
@@ -727,6 +741,7 @@ relocate_new_kernel:
 	rfi
 
 1:
+#endif
 	/* from this point address translation is turned off */
 	/* and interrupts are disabled */
 
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index a2b18dffa03..e5144906a56 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -28,7 +28,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	std	r0,16(r1)
@@ -52,7 +51,6 @@ _GLOBAL(call_handle_irq)
 	ld	r0,16(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 	.section	".toc","aw"
 PPC64_CACHES:
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f88acf0218d..139a773853f 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,7 +9,7 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
@@ -117,7 +117,7 @@ void __init allocate_pacas(void)
 	 * the first segment. On iSeries they must be within the area mapped
 	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(0x10000000ULL, memblock.rmo_size);
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
@@ -128,7 +128,7 @@ void __init allocate_pacas(void)
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
 
-	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
@@ -148,7 +148,7 @@ void __init free_unused_pacas(void)
 	if (new_size >= paca_size)
 		return;
 
-	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+	memblock_free(__pa(paca) + new_size, paca_size - new_size);
 
 	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
 		paca_size - new_size);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6646005dffb..5b38f6ae2b2 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1309,6 +1309,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 43b83c35cf5..5c14ffe5125 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -791,8 +791,11 @@ static void power_pmu_disable(struct perf_event *event)
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	for (i = 0; i < cpuhw->n_events; ++i) {
 		if (event == cpuhw->event[i]) {
-			while (++i < cpuhw->n_events)
+			while (++i < cpuhw->n_events) {
 				cpuhw->event[i-1] = cpuhw->event[i];
+				cpuhw->events[i-1] = cpuhw->events[i];
+				cpuhw->flags[i-1] = cpuhw->flags[i];
+			}
 			--cpuhw->n_events;
 			ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
 			if (event->hw.idx) {
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index 369872f6cf7..babcceecd2e 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -566,9 +566,9 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, 0);
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index bc9f39d2598..ab3e392ac63 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -101,10 +101,6 @@ EXPORT_SYMBOL(pci_dram_offset);
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);
 
-#ifndef CONFIG_BOOKE
-EXPORT_SYMBOL_GPL(cvt_df);
-EXPORT_SYMBOL_GPL(cvt_fd);
-#endif
 EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9d255b4f0a0..773424df828 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1005,7 +1005,6 @@ out:
 	return error;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 				  unsigned long nbytes)
 {
@@ -1030,10 +1029,6 @@ static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 	return 0;
 }
 
-#else
-#define valid_irq_stack(sp, p, nb)	0
-#endif /* CONFIG_IRQSTACKS */
-
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05131d634e7..fed9bf6187d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,7 +31,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -98,7 +98,7 @@ static void __init move_device_tree(void)
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
-		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = (struct boot_param_header *)p;
 		DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
 	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
-	u64 base, size, lmb_size;
+	u64 base, size, memblock_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
-	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
 	if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 		   or if the block is not assigned to this partition (0x8) */
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
-		size = lmb_size;
+		size = memblock_size;
 		rngs = 1;
 		if (is_kexec_kdump) {
 			/*
-			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * For each memblock in ibm,dynamic-memory, a corresponding
 			 * entry in linux,drconf-usable-memory property contains
 			 * a counter 'p' followed by 'p' (base, size) duple.
 			 * Now read the counter from
@@ -469,10 +469,10 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 				if ((base + size) > 0x80000000ul)
 					size = 0x80000000ul - base;
 			}
-			lmb_add(base, size);
+			memblock_add(base, size);
 		} while (--rngs);
 	}
-	lmb_dump_all();
+	memblock_dump_all();
 	return 0;
 }
 #else
@@ -501,14 +501,14 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	}
 #endif
 
-	lmb_add(base, size);
+	memblock_add(base, size);
 
 	memstart_addr = min((u64)memstart_addr, base);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@ static void __init early_reserve_mem(void)
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
 	self_size = initial_boot_params->totalsize;
-	lmb_reserve(self_base, self_size);
+	memblock_reserve(self_base, self_size);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* then reserve the initrd, if any */
 	if (initrd_start && (initrd_end > initrd_start))
-		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@ static void __init early_reserve_mem(void)
 			if (base_32 == self_base && size_32 == self_size)
 				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
-			lmb_reserve(base_32, size_32);
+			memblock_reserve(base_32, size_32);
 		}
 		return;
 	}
@@ -571,7 +571,7 @@ static void __init early_reserve_mem(void)
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 	}
 }
 
@@ -594,7 +594,7 @@ static inline unsigned long phyp_dump_calculate_reserve_size(void)
 		return phyp_dump_info->reserve_bootvar;
 
 	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
+	tmp = memblock_end_of_DRAM();
 	do_div(tmp, 20);
 
 	/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@ static void __init phyp_dump_reserve_mem(void)
 	if (phyp_dump_info->phyp_dump_is_active) {
 		/* Reserve *everything* above RMR.Area freed by userland tools*/
 		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
+		size = memblock_end_of_DRAM() - base;
 
 		/* XXX crashed_ram_end is wrong, since it may be beyond
 		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@ static void __init phyp_dump_reserve_mem(void)
 		size = phyp_dump_info->cpu_state_size +
 			phyp_dump_info->hpte_region_size +
 			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
 	}
@@ -681,8 +681,8 @@ void __init early_init_devtree(void *params)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -690,11 +690,11 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
-	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
 	if (PHYSICAL_START > MEMORY_START)
-		lmb_reserve(MEMORY_START, 0x8000);
+		memblock_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
@@ -706,17 +706,17 @@ void __init early_init_devtree(void *params)
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
-		lmb_analyze();
-		memsize = lmb_phys_mem_size();
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
 		if ((memsize & PAGE_MASK) != memsize)
 			limit = memsize & PAGE_MASK;
 	}
-	lmb_enforce_memory_limit(limit);
+	memblock_enforce_memory_limit(limit);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 97d4bd9442d..3b6f8ae9b8c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -872,7 +872,7 @@ static void __init prom_send_capabilities(void)
 				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
 				    *cores);
 		} else {
-			*cores = NR_CPUS / prom_count_smt_threads();
+			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
 			prom_printf("Max number of cores passed to firmware: 0x%x\n",
 				    (unsigned long)*cores);
 		}
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 1ac136b128f..9f82f493789 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -52,12 +52,18 @@ do
 	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
 		OK=1
 	fi
 	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
 		OK=1
 	fi
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 0e1ec6f746f..d0516dbee76 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,7 +22,7 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/prom.h>
@@ -934,11 +934,11 @@ void __init rtas_initialize(void)
 	 */
 #ifdef CONFIG_PPC64
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
-		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+		rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}
 #endif
-	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+	rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index bfc2abafac4..67a84d8f118 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -94,12 +94,8 @@ struct flash_block_list {
 	struct flash_block_list *next;
 	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
 };
-struct flash_block_list_header { /* just the header of flash_block_list */
-	unsigned long num_blocks;
-	struct flash_block_list *next;
-};
 
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
 
 /* Use slab cache to guarantee 4k alignment */
 static struct kmem_cache *flash_block_cache = NULL;
@@ -108,13 +104,14 @@ static struct kmem_cache *flash_block_cache = NULL;
 
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go.  The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
  * is treated as the number of entries currently in the block
- * (i.e. not a byte count).  This is all fixed on release.
+ * (i.e. not a byte count).  This is all fixed when calling 
+ * the flash routine.
  */
 
 /* Status int must be first member of struct */
@@ -201,16 +198,16 @@ static int rtas_flash_release(struct inode *inode, struct file *file)
 	if (uf->flist) {    
 		/* File was opened in write mode for a new flash attempt */
 		/* Clear saved list */
-		if (rtas_firmware_flash_list.next) {
-			free_flash_list(rtas_firmware_flash_list.next);
-			rtas_firmware_flash_list.next = NULL;
+		if (rtas_firmware_flash_list) {
+			free_flash_list(rtas_firmware_flash_list);
+			rtas_firmware_flash_list = NULL;
 		}
 
 		if (uf->status != FLASH_AUTH)  
 			uf->status = flash_list_valid(uf->flist);
 
 		if (uf->status == FLASH_IMG_READY) 
-			rtas_firmware_flash_list.next = uf->flist;
+			rtas_firmware_flash_list = uf->flist;
 		else
 			free_flash_list(uf->flist);
 
@@ -593,7 +590,7 @@ static void rtas_flash_firmware(int reboot_type)
 	unsigned long rtas_block_list;
 	int i, status, update_token;
 
-	if (rtas_firmware_flash_list.next == NULL)
+	if (rtas_firmware_flash_list == NULL)
 		return;		/* nothing to do */
 
 	if (reboot_type != SYS_RESTART) {
@@ -610,20 +607,25 @@ static void rtas_flash_firmware(int reboot_type)
 		return;
 	}
 
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
+	/*
+	 * NOTE: the "first" block must be under 4GB, so we create
+	 * an entry with no data blocks in the reserved buffer in
+	 * the kernel data segment.
 	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	spin_lock(&rtas_data_buf_lock);
+	flist = (struct flash_block_list *)&rtas_data_buf[0];
+	flist->num_blocks = 0;
+	flist->next = rtas_firmware_flash_list;
 	rtas_block_list = virt_to_abs(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		spin_unlock(&rtas_data_buf_lock);
 		return;
 	}
 
 	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
 	/* Update the block_list in place. */
+	rtas_firmware_flash_list = NULL; /* too hard to backout on error */
 	image_size = 0;
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
@@ -664,6 +666,7 @@ static void rtas_flash_firmware(int reboot_type)
 		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
 		break;
 	}
+	spin_unlock(&rtas_data_buf_lock);
 }
 
 static void remove_flash_pde(struct proc_dir_entry *dp)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 5e4d852f640..b7e6c7e193a 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -33,7 +33,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 #include <asm/paca.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 8f58986c2ad..a10ffc85ada 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -16,7 +16,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -241,23 +241,19 @@ int __init ppc_init(void)
 
 arch_initcall(ppc_init);
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 static void __init exc_lvl_early_init(void)
@@ -265,15 +261,15 @@ static void __init exc_lvl_early_init(void)
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #ifdef CONFIG_BOOKE
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #endif
 	}
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f3fb5a79de5..d135f93cb0f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,7 +34,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -158,7 +158,7 @@ static void __init setup_paca(struct paca_struct *new_paca)
  * the CPU that ignores the top 2 bits of the address in real
  * mode so we can access kernel globals normally provided we
  * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
  * data structures, and allocate & initialize the hash table
  * and segment tables so we can start running with translation
  * enabled.
@@ -404,7 +404,7 @@ void __init setup_system(void)
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
+	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -432,7 +432,6 @@ static u64 slb0_limit(void)
 	return 1UL << SID_SHIFT;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	u64 limit = slb0_limit();
@@ -444,16 +443,13 @@ static void __init irqstack_early_init(void)
 	 */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
@@ -462,11 +458,11 @@ static void __init exc_lvl_early_init(void)
 
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 #else
@@ -491,11 +487,11 @@ static void __init emergency_stack_init(void)
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(slb0_limit(), lmb.rmo_size);
+	limit = min(slb0_limit(), memblock.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
-		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
 		sp += THREAD_SIZE;
 		paca[i].emergency_sp = __va(sp);
 	}
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
new file mode 100644
index 00000000000..11a39307dd7
--- /dev/null
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -0,0 +1,193 @@
+/*
+ * Based on swsusp_32.S, modified for FSL BookE by
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright (c) 2009-2010 MontaVista Software, LLC.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_TCR		0xc
+#define SL_SPRG0	0x10
+#define SL_SPRG1	0x14
+#define SL_SPRG2	0x18
+#define SL_SPRG3	0x1c
+#define SL_SPRG4	0x20
+#define SL_SPRG5	0x24
+#define SL_SPRG6	0x28
+#define SL_SPRG7	0x2c
+#define SL_TBU		0x30
+#define SL_TBL		0x34
+#define SL_R2		0x38
+#define SL_CR		0x3c
+#define SL_LR		0x40
+#define SL_R12		0x44	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & TCR */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfspr	r4,SPRN_TCR
+	stw	r4,SL_TCR(r11)
+
+	/* Get a stable timebase and save it */
+1:	mfspr	r4,SPRN_TBRU
+	stw	r4,SL_TBU(r11)
+	mfspr	r5,SPRN_TBRL
+	stw	r5,SL_TBL(r11)
+	mfspr	r3,SPRN_TBRU
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG1(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG2(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG3(r11)
+	mfsprg	r4,4
+	stw	r4,SL_SPRG4(r11)
+	mfsprg	r4,5
+	stw	r4,SL_SPRG5(r11)
+	mfsprg	r4,6
+	stw	r4,SL_SPRG6(r11)
+	mfsprg	r4,7
+	stw	r4,SL_SPRG7(r11)
+
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+_GLOBAL(swsusp_arch_resume)
+	sync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(restore_pblist)@h
+	ori	r11,r11,restore_pblist@l
+	lwz	r3,0(r11)
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	li	r0,256
+	mtctr	r0
+	lwz	r5,pbe_address(r3)	/* source */
+	lwz	r6,pbe_orig_address(r3)	/* destination */
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	lwz	r3,pbe_next(r3)
+	cmpwi	0,r3,0
+	bne	1b
+
+	bl flush_dcache_L1
+	bl flush_instruction_cache
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG1(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG2(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG3(r11)
+	mtsprg	3,r4
+	lwz	r4,SL_SPRG4(r11)
+	mtsprg	4,r4
+	lwz	r4,SL_SPRG5(r11)
+	mtsprg	5,r4
+	lwz	r4,SL_SPRG6(r11)
+	mtsprg	6,r4
+	lwz	r4,SL_SPRG7(r11)
+	mtsprg	7,r4
+
+	/* restore the MSR */
+	lwz	r3,SL_MSR(r11)
+	mtmsr	r3
+
+	/* Restore TB */
+	li	r3,0
+	mtspr	SPRN_TBWL,r3
+	lwz	r3,SL_TBU(r11)
+	lwz	r4,SL_TBL(r11)
+	mtspr	SPRN_TBWU,r3
+	mtspr	SPRN_TBWL,r4
+
+	/* Restore TCR and clear any pending bits in TSR. */
+	lwz	r4,SL_TCR(r11)
+	mtspr	SPRN_TCR,r4
+	lis	r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+	mtspr	SPRN_TSR,r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	li	r3,0
+	blr
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 3031fc712ad..25fc33984c2 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *  Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -305,7 +306,7 @@ static inline int check_io_access(struct pt_regs *regs)
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -421,6 +422,91 @@ int machine_check_47x(struct pt_regs *regs)
 	return 0;
 }
 #elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+	unsigned long mcsr = mfspr(SPRN_MCSR);
+	unsigned long reason = mcsr;
+	int recoverable = 1;
+
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+
+	if (reason & MCSR_ICPERR) {
+		printk("Instruction Cache Parity Error\n");
+
+		/*
+		 * This is recoverable by invalidating the i-cache.
+		 */
+		mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+		while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+			;
+
+		/*
+		 * This will generally be accompanied by an instruction
+		 * fetch error report -- only treat MCSR_IF as fatal
+		 * if it wasn't due to an L1 parity error.
+		 */
+		reason &= ~MCSR_IF;
+	}
+
+	if (reason & MCSR_DCPERR_MC) {
+		printk("Data Cache Parity Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_L2MMU_MHIT) {
+		printk("Hit on multiple TLB entries\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_NMI)
+		printk("Non-maskable interrupt\n");
+
+	if (reason & MCSR_IF) {
+		printk("Instruction Fetch Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LD) {
+		printk("Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_ST) {
+		printk("Store Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LDG) {
+		printk("Guarded Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_TLBSYNC)
+		printk("Simultaneous tlbsync operations\n");
+
+	if (reason & MCSR_BSL2_ERR) {
+		printk("Level 2 Cache Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_MAV) {
+		u64 addr;
+
+		addr = mfspr(SPRN_MCAR);
+		addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+		printk("Machine Check %s Address: %#llx\n",
+		       reason & MCSR_MEA ? "Effective" : "Physical", addr);
+	}
+
+	mtspr(SPRN_MCSR, mcsr);
+	return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
 int machine_check_e500(struct pt_regs *regs)
 {
 	unsigned long reason = get_mc_reason(regs);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d84d19224a9..13002fe206e 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -734,7 +734,7 @@ static int __init vdso_init(void)
 	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		vdso_data->platform |= 1;
-	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->physicalMemorySize = memblock_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;
 	vdso_data->icache_size = ppc64_caches.isize;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index dcd01c82e70..8a0deefac08 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -223,19 +223,17 @@ SECTIONS
 #endif
 
 	/* The initial task and kernel stack */
-	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		INIT_TASK_DATA(THREAD_SIZE)
-	}
+	INIT_TASK_DATA_SECTION(THREAD_SIZE)
 
-	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+	.data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+	.data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 812312542e5..9b9b5cdea84 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -316,7 +316,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 	gfn = gpaddr >> PAGE_SHIFT;
 	new_page = gfn_to_page(vcpu->kvm, gfn);
 	if (is_error_page(new_page)) {
-		printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
+		printk(KERN_ERR "Couldn't get guest page for gfn %llx!\n",
+			(unsigned long long)gfn);
 		kvm_release_page_clean(new_page);
 		return;
 	}
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index ff436066bf7..d45c818a384 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -45,6 +45,7 @@ kvm-book3s_64-objs := \
 	book3s.o \
 	book3s_emulate.o \
 	book3s_interrupts.o \
+	book3s_mmu_hpte.o \
 	book3s_64_mmu_host.o \
 	book3s_64_mmu.o \
 	book3s_32_mmu.o
@@ -57,6 +58,7 @@ kvm-book3s_32-objs := \
 	book3s.o \
 	book3s_emulate.o \
 	book3s_interrupts.o \
+	book3s_mmu_hpte.o \
 	book3s_32_mmu_host.o \
 	book3s_32_mmu.o
 kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index b998abf1a63..a3cef30d1d4 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -1047,8 +1047,6 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	vcpu_load(vcpu);
-
 	regs->pc = kvmppc_get_pc(vcpu);
 	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = kvmppc_get_ctr(vcpu);
@@ -1069,8 +1067,6 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -1078,8 +1074,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	vcpu_load(vcpu);
-
 	kvmppc_set_pc(vcpu, regs->pc);
 	kvmppc_set_cr(vcpu, regs->cr);
 	kvmppc_set_ctr(vcpu, regs->ctr);
@@ -1099,8 +1093,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -1110,8 +1102,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
-	vcpu_load(vcpu);
-
 	sregs->pvr = vcpu->arch.pvr;
 
 	sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
@@ -1131,8 +1121,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -1142,8 +1130,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
-	vcpu_load(vcpu);
-
 	kvmppc_set_pvr(vcpu, sregs->pvr);
 
 	vcpu3s->sdr1 = sregs->u.s.sdr1;
@@ -1171,8 +1157,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -1309,12 +1293,17 @@ extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
 int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret;
-	struct thread_struct ext_bkp;
+	double fpr[32][TS_FPRWIDTH];
+	unsigned int fpscr;
+	int fpexc_mode;
 #ifdef CONFIG_ALTIVEC
-	bool save_vec = current->thread.used_vr;
+	vector128 vr[32];
+	vector128 vscr;
+	unsigned long uninitialized_var(vrsave);
+	int used_vr;
 #endif
 #ifdef CONFIG_VSX
-	bool save_vsx = current->thread.used_vsr;
+	int used_vsr;
 #endif
 	ulong ext_msr;
 
@@ -1327,27 +1316,27 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	/* Save FPU state in stack */
 	if (current->thread.regs->msr & MSR_FP)
 		giveup_fpu(current);
-	memcpy(ext_bkp.fpr, current->thread.fpr, sizeof(current->thread.fpr));
-	ext_bkp.fpscr = current->thread.fpscr;
-	ext_bkp.fpexc_mode = current->thread.fpexc_mode;
+	memcpy(fpr, current->thread.fpr, sizeof(current->thread.fpr));
+	fpscr = current->thread.fpscr.val;
+	fpexc_mode = current->thread.fpexc_mode;
 
 #ifdef CONFIG_ALTIVEC
 	/* Save Altivec state in stack */
-	if (save_vec) {
+	used_vr = current->thread.used_vr;
+	if (used_vr) {
 		if (current->thread.regs->msr & MSR_VEC)
 			giveup_altivec(current);
-		memcpy(ext_bkp.vr, current->thread.vr, sizeof(ext_bkp.vr));
-		ext_bkp.vscr = current->thread.vscr;
-		ext_bkp.vrsave = current->thread.vrsave;
+		memcpy(vr, current->thread.vr, sizeof(current->thread.vr));
+		vscr = current->thread.vscr;
+		vrsave = current->thread.vrsave;
 	}
-	ext_bkp.used_vr = current->thread.used_vr;
 #endif
 
 #ifdef CONFIG_VSX
 	/* Save VSX state in stack */
-	if (save_vsx && (current->thread.regs->msr & MSR_VSX))
+	used_vsr = current->thread.used_vsr;
+	if (used_vsr && (current->thread.regs->msr & MSR_VSX))
 			__giveup_vsx(current);
-	ext_bkp.used_vsr = current->thread.used_vsr;
 #endif
 
 	/* Remember the MSR with disabled extensions */
@@ -1372,22 +1361,22 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	kvmppc_giveup_ext(vcpu, MSR_VSX);
 
 	/* Restore FPU state from stack */
-	memcpy(current->thread.fpr, ext_bkp.fpr, sizeof(ext_bkp.fpr));
-	current->thread.fpscr = ext_bkp.fpscr;
-	current->thread.fpexc_mode = ext_bkp.fpexc_mode;
+	memcpy(current->thread.fpr, fpr, sizeof(current->thread.fpr));
+	current->thread.fpscr.val = fpscr;
+	current->thread.fpexc_mode = fpexc_mode;
 
 #ifdef CONFIG_ALTIVEC
 	/* Restore Altivec state from stack */
-	if (save_vec && current->thread.used_vr) {
-		memcpy(current->thread.vr, ext_bkp.vr, sizeof(ext_bkp.vr));
-		current->thread.vscr = ext_bkp.vscr;
-		current->thread.vrsave= ext_bkp.vrsave;
+	if (used_vr && current->thread.used_vr) {
+		memcpy(current->thread.vr, vr, sizeof(current->thread.vr));
+		current->thread.vscr = vscr;
+		current->thread.vrsave = vrsave;
 	}
-	current->thread.used_vr = ext_bkp.used_vr;
+	current->thread.used_vr = used_vr;
 #endif
 
 #ifdef CONFIG_VSX
-	current->thread.used_vsr = ext_bkp.used_vsr;
+	current->thread.used_vsr = used_vsr;
 #endif
 
 	return ret;
@@ -1395,12 +1384,22 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 static int kvmppc_book3s_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), 0,
-			THIS_MODULE);
+	int r;
+
+	r = kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), 0,
+		     THIS_MODULE);
+
+	if (r)
+		return r;
+
+	r = kvmppc_mmu_hpte_sysinit();
+
+	return r;
 }
 
 static void kvmppc_book3s_exit(void)
 {
+	kvmppc_mmu_hpte_sysexit();
 	kvm_exit();
 }
 
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
index 0b10503c8a4..3292d76101d 100644
--- a/arch/powerpc/kvm/book3s_32_mmu.c
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -354,10 +354,10 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
 		*vsid = VSID_REAL_DR | gvsid;
 		break;
 	case MSR_DR|MSR_IR:
-		if (!sr->valid)
-			return -1;
-
-		*vsid = sr->vsid;
+		if (sr->valid)
+			*vsid = sr->vsid;
+		else
+			*vsid = VSID_BAT | gvsid;
 		break;
 	default:
 		BUG();
diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c
index 0bb66005338..0b51ef872c1 100644
--- a/arch/powerpc/kvm/book3s_32_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_32_mmu_host.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/hash.h>
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
@@ -57,139 +58,26 @@
 static ulong htab;
 static u32 htabmask;
 
-static void invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
+void kvmppc_mmu_invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
 {
 	volatile u32 *pteg;
 
-	dprintk_mmu("KVM: Flushing SPTE: 0x%llx (0x%llx) -> 0x%llx\n",
-		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
-
+	/* Remove from host HTAB */
 	pteg = (u32*)pte->slot;
-
 	pteg[0] = 0;
+
+	/* And make sure it's gone from the TLB too */
 	asm volatile ("sync");
 	asm volatile ("tlbie %0" : : "r" (pte->pte.eaddr) : "memory");
 	asm volatile ("sync");
 	asm volatile ("tlbsync");
-
-	pte->host_va = 0;
-
-	if (pte->pte.may_write)
-		kvm_release_pfn_dirty(pte->pfn);
-	else
-		kvm_release_pfn_clean(pte->pfn);
-}
-
-void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%x & 0x%x\n",
-		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	guest_ea &= ea_mask;
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.eaddr & ea_mask) == guest_ea) {
-			invalidate_pte(vcpu, pte);
-		}
-	}
-
-	/* Doing a complete flush -> start from scratch */
-	if (!ea_mask)
-		vcpu->arch.hpte_cache_offset = 0;
-}
-
-void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
-		    vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	guest_vp &= vp_mask;
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.vpage & vp_mask) == guest_vp) {
-			invalidate_pte(vcpu, pte);
-		}
-	}
-}
-
-void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
-		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.raddr >= pa_start) &&
-		    (pte->pte.raddr < pa_end)) {
-			invalidate_pte(vcpu, pte);
-		}
-	}
-}
-
-struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
-{
-	int i;
-	u64 guest_vp;
-
-	guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
-	for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if (pte->pte.vpage == guest_vp)
-			return &pte->pte;
-	}
-
-	return NULL;
-}
-
-static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
-{
-	if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
-		kvmppc_mmu_pte_flush(vcpu, 0, 0);
-
-	return vcpu->arch.hpte_cache_offset++;
 }
 
 /* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
  * a hash, so we don't waste cycles on looping */
 static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
 {
-	return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+	return hash_64(gvsid, SID_MAP_BITS);
 }
 
 
@@ -256,7 +144,6 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 	register int rr = 0;
 	bool primary = false;
 	bool evict = false;
-	int hpte_id;
 	struct hpte_cache *pte;
 
 	/* Get host physical address for gpa */
@@ -341,8 +228,7 @@ next_pteg:
 
 	/* Now tell our Shadow PTE code about the new page */
 
-	hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
-	pte = &vcpu->arch.hpte_cache[hpte_id];
+	pte = kvmppc_mmu_hpte_cache_next(vcpu);
 
 	dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%llx (0x%llx) -> %lx\n",
 		    orig_pte->may_write ? 'w' : '-',
@@ -355,6 +241,8 @@ next_pteg:
 	pte->pte = *orig_pte;
 	pte->pfn = hpaddr >> PAGE_SHIFT;
 
+	kvmppc_mmu_hpte_cache_map(vcpu, pte);
+
 	return 0;
 }
 
@@ -439,7 +327,7 @@ void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 {
-	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	kvmppc_mmu_hpte_destroy(vcpu);
 	preempt_disable();
 	__destroy_context(to_book3s(vcpu)->context_id);
 	preempt_enable();
@@ -479,5 +367,7 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 	htabmask = ((sdr1 & 0x1FF) << 16) | 0xFFC0;
 	htab = (ulong)__va(sdr1 & 0xffff0000);
 
+	kvmppc_mmu_hpte_init(vcpu);
+
 	return 0;
 }
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index e4b5744977f..384179a5002 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/hash.h>
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
@@ -46,135 +47,20 @@
 #define dprintk_slb(a, ...) do { } while(0)
 #endif
 
-static void invalidate_pte(struct hpte_cache *pte)
+void kvmppc_mmu_invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
 {
-	dprintk_mmu("KVM: Flushing SPT: 0x%lx (0x%llx) -> 0x%llx\n",
-		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
-
 	ppc_md.hpte_invalidate(pte->slot, pte->host_va,
 			       MMU_PAGE_4K, MMU_SEGSIZE_256M,
 			       false);
-	pte->host_va = 0;
-
-	if (pte->pte.may_write)
-		kvm_release_pfn_dirty(pte->pfn);
-	else
-		kvm_release_pfn_clean(pte->pfn);
-}
-
-void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%lx & 0x%lx\n",
-		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	guest_ea &= ea_mask;
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.eaddr & ea_mask) == guest_ea) {
-			invalidate_pte(pte);
-		}
-	}
-
-	/* Doing a complete flush -> start from scratch */
-	if (!ea_mask)
-		vcpu->arch.hpte_cache_offset = 0;
-}
-
-void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
-		    vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	guest_vp &= vp_mask;
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.vpage & vp_mask) == guest_vp) {
-			invalidate_pte(pte);
-		}
-	}
-}
-
-void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
-{
-	int i;
-
-	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%lx & 0x%lx\n",
-		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
-	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
-
-	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if ((pte->pte.raddr >= pa_start) &&
-		    (pte->pte.raddr < pa_end)) {
-			invalidate_pte(pte);
-		}
-	}
-}
-
-struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
-{
-	int i;
-	u64 guest_vp;
-
-	guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
-	for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
-		struct hpte_cache *pte;
-
-		pte = &vcpu->arch.hpte_cache[i];
-		if (!pte->host_va)
-			continue;
-
-		if (pte->pte.vpage == guest_vp)
-			return &pte->pte;
-	}
-
-	return NULL;
-}
-
-static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
-{
-	if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
-		kvmppc_mmu_pte_flush(vcpu, 0, 0);
-
-	return vcpu->arch.hpte_cache_offset++;
 }
 
 /* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
  * a hash, so we don't waste cycles on looping */
 static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
 {
-	return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
-		     ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+	return hash_64(gvsid, SID_MAP_BITS);
 }
 
-
 static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
 {
 	struct kvmppc_sid_map *map;
@@ -273,8 +159,7 @@ map_again:
 		attempt++;
 		goto map_again;
 	} else {
-		int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
-		struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
+		struct hpte_cache *pte = kvmppc_mmu_hpte_cache_next(vcpu);
 
 		dprintk_mmu("KVM: %c%c Map 0x%lx: [%lx] 0x%lx (0x%llx) -> %lx\n",
 			    ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
@@ -292,6 +177,8 @@ map_again:
 		pte->host_va = va;
 		pte->pte = *orig_pte;
 		pte->pfn = hpaddr >> PAGE_SHIFT;
+
+		kvmppc_mmu_hpte_cache_map(vcpu, pte);
 	}
 
 	return 0;
@@ -418,7 +305,7 @@ void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 {
-	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	kvmppc_mmu_hpte_destroy(vcpu);
 	__destroy_context(to_book3s(vcpu)->context_id);
 }
 
@@ -436,5 +323,7 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 	vcpu3s->vsid_first = vcpu3s->context_id << USER_ESID_BITS;
 	vcpu3s->vsid_next = vcpu3s->vsid_first;
 
+	kvmppc_mmu_hpte_init(vcpu);
+
 	return 0;
 }
diff --git a/arch/powerpc/kvm/book3s_mmu_hpte.c b/arch/powerpc/kvm/book3s_mmu_hpte.c
new file mode 100644
index 00000000000..4868d4a7ebc
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_mmu_hpte.c
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2010 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ *     Alexander Graf <agraf@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/hash.h>
+#include <linux/slab.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+#define PTE_SIZE	12
+
+/* #define DEBUG_MMU */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+static struct kmem_cache *hpte_cache;
+
+static inline u64 kvmppc_mmu_hash_pte(u64 eaddr)
+{
+	return hash_64(eaddr >> PTE_SIZE, HPTEG_HASH_BITS_PTE);
+}
+
+static inline u64 kvmppc_mmu_hash_vpte(u64 vpage)
+{
+	return hash_64(vpage & 0xfffffffffULL, HPTEG_HASH_BITS_VPTE);
+}
+
+static inline u64 kvmppc_mmu_hash_vpte_long(u64 vpage)
+{
+	return hash_64((vpage & 0xffffff000ULL) >> 12,
+		       HPTEG_HASH_BITS_VPTE_LONG);
+}
+
+void kvmppc_mmu_hpte_cache_map(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
+{
+	u64 index;
+
+	/* Add to ePTE list */
+	index = kvmppc_mmu_hash_pte(pte->pte.eaddr);
+	hlist_add_head(&pte->list_pte, &vcpu->arch.hpte_hash_pte[index]);
+
+	/* Add to vPTE list */
+	index = kvmppc_mmu_hash_vpte(pte->pte.vpage);
+	hlist_add_head(&pte->list_vpte, &vcpu->arch.hpte_hash_vpte[index]);
+
+	/* Add to vPTE_long list */
+	index = kvmppc_mmu_hash_vpte_long(pte->pte.vpage);
+	hlist_add_head(&pte->list_vpte_long,
+		       &vcpu->arch.hpte_hash_vpte_long[index]);
+}
+
+static void invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
+{
+	dprintk_mmu("KVM: Flushing SPT: 0x%lx (0x%llx) -> 0x%llx\n",
+		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+	/* Different for 32 and 64 bit */
+	kvmppc_mmu_invalidate_pte(vcpu, pte);
+
+	if (pte->pte.may_write)
+		kvm_release_pfn_dirty(pte->pfn);
+	else
+		kvm_release_pfn_clean(pte->pfn);
+
+	hlist_del(&pte->list_pte);
+	hlist_del(&pte->list_vpte);
+	hlist_del(&pte->list_vpte_long);
+
+	vcpu->arch.hpte_cache_count--;
+	kmem_cache_free(hpte_cache, pte);
+}
+
+static void kvmppc_mmu_pte_flush_all(struct kvm_vcpu *vcpu)
+{
+	struct hpte_cache *pte;
+	struct hlist_node *node, *tmp;
+	int i;
+
+	for (i = 0; i < HPTEG_HASH_NUM_VPTE_LONG; i++) {
+		struct hlist_head *list = &vcpu->arch.hpte_hash_vpte_long[i];
+
+		hlist_for_each_entry_safe(pte, node, tmp, list, list_vpte_long)
+			invalidate_pte(vcpu, pte);
+	}
+}
+
+static void kvmppc_mmu_pte_flush_page(struct kvm_vcpu *vcpu, ulong guest_ea)
+{
+	struct hlist_head *list;
+	struct hlist_node *node, *tmp;
+	struct hpte_cache *pte;
+
+	/* Find the list of entries in the map */
+	list = &vcpu->arch.hpte_hash_pte[kvmppc_mmu_hash_pte(guest_ea)];
+
+	/* Check the list for matching entries and invalidate */
+	hlist_for_each_entry_safe(pte, node, tmp, list, list_pte)
+		if ((pte->pte.eaddr & ~0xfffUL) == guest_ea)
+			invalidate_pte(vcpu, pte);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
+{
+	u64 i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%lx & 0x%lx\n",
+		    vcpu->arch.hpte_cache_count, guest_ea, ea_mask);
+
+	guest_ea &= ea_mask;
+
+	switch (ea_mask) {
+	case ~0xfffUL:
+		kvmppc_mmu_pte_flush_page(vcpu, guest_ea);
+		break;
+	case 0x0ffff000:
+		/* 32-bit flush w/o segment, go through all possible segments */
+		for (i = 0; i < 0x100000000ULL; i += 0x10000000ULL)
+			kvmppc_mmu_pte_flush(vcpu, guest_ea | i, ~0xfffUL);
+		break;
+	case 0:
+		/* Doing a complete flush -> start from scratch */
+		kvmppc_mmu_pte_flush_all(vcpu);
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+/* Flush with mask 0xfffffffff */
+static void kvmppc_mmu_pte_vflush_short(struct kvm_vcpu *vcpu, u64 guest_vp)
+{
+	struct hlist_head *list;
+	struct hlist_node *node, *tmp;
+	struct hpte_cache *pte;
+	u64 vp_mask = 0xfffffffffULL;
+
+	list = &vcpu->arch.hpte_hash_vpte[kvmppc_mmu_hash_vpte(guest_vp)];
+
+	/* Check the list for matching entries and invalidate */
+	hlist_for_each_entry_safe(pte, node, tmp, list, list_vpte)
+		if ((pte->pte.vpage & vp_mask) == guest_vp)
+			invalidate_pte(vcpu, pte);
+}
+
+/* Flush with mask 0xffffff000 */
+static void kvmppc_mmu_pte_vflush_long(struct kvm_vcpu *vcpu, u64 guest_vp)
+{
+	struct hlist_head *list;
+	struct hlist_node *node, *tmp;
+	struct hpte_cache *pte;
+	u64 vp_mask = 0xffffff000ULL;
+
+	list = &vcpu->arch.hpte_hash_vpte_long[
+		kvmppc_mmu_hash_vpte_long(guest_vp)];
+
+	/* Check the list for matching entries and invalidate */
+	hlist_for_each_entry_safe(pte, node, tmp, list, list_vpte_long)
+		if ((pte->pte.vpage & vp_mask) == guest_vp)
+			invalidate_pte(vcpu, pte);
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_count, guest_vp, vp_mask);
+	guest_vp &= vp_mask;
+
+	switch(vp_mask) {
+	case 0xfffffffffULL:
+		kvmppc_mmu_pte_vflush_short(vcpu, guest_vp);
+		break;
+	case 0xffffff000ULL:
+		kvmppc_mmu_pte_vflush_long(vcpu, guest_vp);
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
+{
+	struct hlist_node *node, *tmp;
+	struct hpte_cache *pte;
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%lx - 0x%lx\n",
+		    vcpu->arch.hpte_cache_count, pa_start, pa_end);
+
+	for (i = 0; i < HPTEG_HASH_NUM_VPTE_LONG; i++) {
+		struct hlist_head *list = &vcpu->arch.hpte_hash_vpte_long[i];
+
+		hlist_for_each_entry_safe(pte, node, tmp, list, list_vpte_long)
+			if ((pte->pte.raddr >= pa_start) &&
+			    (pte->pte.raddr < pa_end))
+				invalidate_pte(vcpu, pte);
+	}
+}
+
+struct hpte_cache *kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+	struct hpte_cache *pte;
+
+	pte = kmem_cache_zalloc(hpte_cache, GFP_KERNEL);
+	vcpu->arch.hpte_cache_count++;
+
+	if (vcpu->arch.hpte_cache_count == HPTEG_CACHE_NUM)
+		kvmppc_mmu_pte_flush_all(vcpu);
+
+	return pte;
+}
+
+void kvmppc_mmu_hpte_destroy(struct kvm_vcpu *vcpu)
+{
+	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+}
+
+static void kvmppc_mmu_hpte_init_hash(struct hlist_head *hash_list, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		INIT_HLIST_HEAD(&hash_list[i]);
+}
+
+int kvmppc_mmu_hpte_init(struct kvm_vcpu *vcpu)
+{
+	/* init hpte lookup hashes */
+	kvmppc_mmu_hpte_init_hash(vcpu->arch.hpte_hash_pte,
+				  ARRAY_SIZE(vcpu->arch.hpte_hash_pte));
+	kvmppc_mmu_hpte_init_hash(vcpu->arch.hpte_hash_vpte,
+				  ARRAY_SIZE(vcpu->arch.hpte_hash_vpte));
+	kvmppc_mmu_hpte_init_hash(vcpu->arch.hpte_hash_vpte_long,
+				  ARRAY_SIZE(vcpu->arch.hpte_hash_vpte_long));
+
+	return 0;
+}
+
+int kvmppc_mmu_hpte_sysinit(void)
+{
+	/* init hpte slab cache */
+	hpte_cache = kmem_cache_create("kvm-spt", sizeof(struct hpte_cache),
+				       sizeof(struct hpte_cache), 0, NULL);
+
+	return 0;
+}
+
+void kvmppc_mmu_hpte_sysexit(void)
+{
+	kmem_cache_destroy(hpte_cache);
+}
diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c
index a9f66abafcb..474f2e24050 100644
--- a/arch/powerpc/kvm/book3s_paired_singles.c
+++ b/arch/powerpc/kvm/book3s_paired_singles.c
@@ -159,10 +159,7 @@
 
 static inline void kvmppc_sync_qpr(struct kvm_vcpu *vcpu, int rt)
 {
-	struct thread_struct t;
-
-	t.fpscr.val = vcpu->arch.fpscr;
-	cvt_df((double*)&vcpu->arch.fpr[rt], (float*)&vcpu->arch.qpr[rt], &t);
+	kvm_cvt_df(&vcpu->arch.fpr[rt], &vcpu->arch.qpr[rt], &vcpu->arch.fpscr);
 }
 
 static void kvmppc_inject_pf(struct kvm_vcpu *vcpu, ulong eaddr, bool is_store)
@@ -183,7 +180,6 @@ static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				   int rs, ulong addr, int ls_type)
 {
 	int emulated = EMULATE_FAIL;
-	struct thread_struct t;
 	int r;
 	char tmp[8];
 	int len = sizeof(u32);
@@ -191,8 +187,6 @@ static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	if (ls_type == FPU_LS_DOUBLE)
 		len = sizeof(u64);
 
-	t.fpscr.val = vcpu->arch.fpscr;
-
 	/* read from memory */
 	r = kvmppc_ld(vcpu, &addr, len, tmp, true);
 	vcpu->arch.paddr_accessed = addr;
@@ -210,7 +204,7 @@ static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	/* put in registers */
 	switch (ls_type) {
 	case FPU_LS_SINGLE:
-		cvt_fd((float*)tmp, (double*)&vcpu->arch.fpr[rs], &t);
+		kvm_cvt_fd((u32*)tmp, &vcpu->arch.fpr[rs], &vcpu->arch.fpscr);
 		vcpu->arch.qpr[rs] = *((u32*)tmp);
 		break;
 	case FPU_LS_DOUBLE:
@@ -229,17 +223,14 @@ static int kvmppc_emulate_fpr_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				    int rs, ulong addr, int ls_type)
 {
 	int emulated = EMULATE_FAIL;
-	struct thread_struct t;
 	int r;
 	char tmp[8];
 	u64 val;
 	int len;
 
-	t.fpscr.val = vcpu->arch.fpscr;
-
 	switch (ls_type) {
 	case FPU_LS_SINGLE:
-		cvt_df((double*)&vcpu->arch.fpr[rs], (float*)tmp, &t);
+		kvm_cvt_df(&vcpu->arch.fpr[rs], (u32*)tmp, &vcpu->arch.fpscr);
 		val = *((u32*)tmp);
 		len = sizeof(u32);
 		break;
@@ -278,13 +269,10 @@ static int kvmppc_emulate_psq_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				   int rs, ulong addr, bool w, int i)
 {
 	int emulated = EMULATE_FAIL;
-	struct thread_struct t;
 	int r;
 	float one = 1.0;
 	u32 tmp[2];
 
-	t.fpscr.val = vcpu->arch.fpscr;
-
 	/* read from memory */
 	if (w) {
 		r = kvmppc_ld(vcpu, &addr, sizeof(u32), tmp, true);
@@ -308,7 +296,7 @@ static int kvmppc_emulate_psq_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	emulated = EMULATE_DONE;
 
 	/* put in registers */
-	cvt_fd((float*)&tmp[0], (double*)&vcpu->arch.fpr[rs], &t);
+	kvm_cvt_fd(&tmp[0], &vcpu->arch.fpr[rs], &vcpu->arch.fpscr);
 	vcpu->arch.qpr[rs] = tmp[1];
 
 	dprintk(KERN_INFO "KVM: PSQ_LD [0x%x, 0x%x] at 0x%lx (%d)\n", tmp[0],
@@ -322,14 +310,11 @@ static int kvmppc_emulate_psq_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				    int rs, ulong addr, bool w, int i)
 {
 	int emulated = EMULATE_FAIL;
-	struct thread_struct t;
 	int r;
 	u32 tmp[2];
 	int len = w ? sizeof(u32) : sizeof(u64);
 
-	t.fpscr.val = vcpu->arch.fpscr;
-
-	cvt_df((double*)&vcpu->arch.fpr[rs], (float*)&tmp[0], &t);
+	kvm_cvt_df(&vcpu->arch.fpr[rs], &tmp[0], &vcpu->arch.fpscr);
 	tmp[1] = vcpu->arch.qpr[rs];
 
 	r = kvmppc_st(vcpu, &addr, len, tmp, true);
@@ -517,7 +502,7 @@ static int get_d_signext(u32 inst)
 static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
 				      int reg_out, int reg_in1, int reg_in2,
 				      int reg_in3, int scalar,
-				      void (*func)(struct thread_struct *t,
+				      void (*func)(u64 *fpscr,
 						 u32 *dst, u32 *src1,
 						 u32 *src2, u32 *src3))
 {
@@ -526,27 +511,25 @@ static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
 	u32 ps0_out;
 	u32 ps0_in1, ps0_in2, ps0_in3;
 	u32 ps1_in1, ps1_in2, ps1_in3;
-	struct thread_struct t;
-	t.fpscr.val = vcpu->arch.fpscr;
 
 	/* RC */
 	WARN_ON(rc);
 
 	/* PS0 */
-	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
-	cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
-	cvt_df((double*)&fpr[reg_in3], (float*)&ps0_in3, &t);
+	kvm_cvt_df(&fpr[reg_in1], &ps0_in1, &vcpu->arch.fpscr);
+	kvm_cvt_df(&fpr[reg_in2], &ps0_in2, &vcpu->arch.fpscr);
+	kvm_cvt_df(&fpr[reg_in3], &ps0_in3, &vcpu->arch.fpscr);
 
 	if (scalar & SCALAR_LOW)
 		ps0_in2 = qpr[reg_in2];
 
-	func(&t, &ps0_out, &ps0_in1, &ps0_in2, &ps0_in3);
+	func(&vcpu->arch.fpscr, &ps0_out, &ps0_in1, &ps0_in2, &ps0_in3);
 
 	dprintk(KERN_INFO "PS3 ps0 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
 			  ps0_in1, ps0_in2, ps0_in3, ps0_out);
 
 	if (!(scalar & SCALAR_NO_PS0))
-		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+		kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr);
 
 	/* PS1 */
 	ps1_in1 = qpr[reg_in1];
@@ -557,7 +540,7 @@ static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
 		ps1_in2 = ps0_in2;
 
 	if (!(scalar & SCALAR_NO_PS1))
-		func(&t, &qpr[reg_out], &ps1_in1, &ps1_in2, &ps1_in3);
+		func(&vcpu->arch.fpscr, &qpr[reg_out], &ps1_in1, &ps1_in2, &ps1_in3);
 
 	dprintk(KERN_INFO "PS3 ps1 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
 			  ps1_in1, ps1_in2, ps1_in3, qpr[reg_out]);
@@ -568,7 +551,7 @@ static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
 static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
 				    int reg_out, int reg_in1, int reg_in2,
 				    int scalar,
-				    void (*func)(struct thread_struct *t,
+				    void (*func)(u64 *fpscr,
 						 u32 *dst, u32 *src1,
 						 u32 *src2))
 {
@@ -578,27 +561,25 @@ static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
 	u32 ps0_in1, ps0_in2;
 	u32 ps1_out;
 	u32 ps1_in1, ps1_in2;
-	struct thread_struct t;
-	t.fpscr.val = vcpu->arch.fpscr;
 
 	/* RC */
 	WARN_ON(rc);
 
 	/* PS0 */
-	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
+	kvm_cvt_df(&fpr[reg_in1], &ps0_in1, &vcpu->arch.fpscr);
 
 	if (scalar & SCALAR_LOW)
 		ps0_in2 = qpr[reg_in2];
 	else
-		cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
+		kvm_cvt_df(&fpr[reg_in2], &ps0_in2, &vcpu->arch.fpscr);
 
-	func(&t, &ps0_out, &ps0_in1, &ps0_in2);
+	func(&vcpu->arch.fpscr, &ps0_out, &ps0_in1, &ps0_in2);
 
 	if (!(scalar & SCALAR_NO_PS0)) {
 		dprintk(KERN_INFO "PS2 ps0 -> f(0x%x, 0x%x) = 0x%x\n",
 				  ps0_in1, ps0_in2, ps0_out);
 
-		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+		kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr);
 	}
 
 	/* PS1 */
@@ -608,7 +589,7 @@ static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
 	if (scalar & SCALAR_HIGH)
 		ps1_in2 = ps0_in2;
 
-	func(&t, &ps1_out, &ps1_in1, &ps1_in2);
+	func(&vcpu->arch.fpscr, &ps1_out, &ps1_in1, &ps1_in2);
 
 	if (!(scalar & SCALAR_NO_PS1)) {
 		qpr[reg_out] = ps1_out;
@@ -622,31 +603,29 @@ static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
 
 static int kvmppc_ps_one_in(struct kvm_vcpu *vcpu, bool rc,
 				    int reg_out, int reg_in,
-				    void (*func)(struct thread_struct *t,
+				    void (*func)(u64 *t,
 						 u32 *dst, u32 *src1))
 {
 	u32 *qpr = vcpu->arch.qpr;
 	u64 *fpr = vcpu->arch.fpr;
 	u32 ps0_out, ps0_in;
 	u32 ps1_in;
-	struct thread_struct t;
-	t.fpscr.val = vcpu->arch.fpscr;
 
 	/* RC */
 	WARN_ON(rc);
 
 	/* PS0 */
-	cvt_df((double*)&fpr[reg_in], (float*)&ps0_in, &t);
-	func(&t, &ps0_out, &ps0_in);
+	kvm_cvt_df(&fpr[reg_in], &ps0_in, &vcpu->arch.fpscr);
+	func(&vcpu->arch.fpscr, &ps0_out, &ps0_in);
 
 	dprintk(KERN_INFO "PS1 ps0 -> f(0x%x) = 0x%x\n",
 			  ps0_in, ps0_out);
 
-	cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+	kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr);
 
 	/* PS1 */
 	ps1_in = qpr[reg_in];
-	func(&t, &qpr[reg_out], &ps1_in);
+	func(&vcpu->arch.fpscr, &qpr[reg_out], &ps1_in);
 
 	dprintk(KERN_INFO "PS1 ps1 -> f(0x%x) = 0x%x\n",
 			  ps1_in, qpr[reg_out]);
@@ -672,13 +651,10 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 
 	bool rcomp = (inst & 1) ? true : false;
 	u32 cr = kvmppc_get_cr(vcpu);
-	struct thread_struct t;
 #ifdef DEBUG
 	int i;
 #endif
 
-	t.fpscr.val = vcpu->arch.fpscr;
-
 	if (!kvmppc_inst_is_paired_single(vcpu, inst))
 		return EMULATE_FAIL;
 
@@ -695,7 +671,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 #ifdef DEBUG
 	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
 		u32 f;
-		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		kvm_cvt_df(&vcpu->arch.fpr[i], &f, &vcpu->arch.fpscr);
 		dprintk(KERN_INFO "FPR[%d] = 0x%x / 0x%llx    QPR[%d] = 0x%x\n",
 			i, f, vcpu->arch.fpr[i], i, vcpu->arch.qpr[i]);
 	}
@@ -819,8 +795,9 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			WARN_ON(rcomp);
 			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra];
 			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
-			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
-			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			kvm_cvt_df(&vcpu->arch.fpr[ax_rb],
+				   &vcpu->arch.qpr[ax_rd],
+				   &vcpu->arch.fpscr);
 			break;
 		case OP_4X_PS_MERGE01:
 			WARN_ON(rcomp);
@@ -830,17 +807,20 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		case OP_4X_PS_MERGE10:
 			WARN_ON(rcomp);
 			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
-			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
-			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			kvm_cvt_fd(&vcpu->arch.qpr[ax_ra],
+				   &vcpu->arch.fpr[ax_rd],
+				   &vcpu->arch.fpscr);
 			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
-			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
-			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			kvm_cvt_df(&vcpu->arch.fpr[ax_rb],
+				   &vcpu->arch.qpr[ax_rd],
+				   &vcpu->arch.fpscr);
 			break;
 		case OP_4X_PS_MERGE11:
 			WARN_ON(rcomp);
 			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
-			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
-			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			kvm_cvt_fd(&vcpu->arch.qpr[ax_ra],
+				   &vcpu->arch.fpr[ax_rd],
+				   &vcpu->arch.fpscr);
 			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
 			break;
 		}
@@ -1275,7 +1255,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 #ifdef DEBUG
 	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
 		u32 f;
-		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		kvm_cvt_df(&vcpu->arch.fpr[i], &f, &vcpu->arch.fpscr);
 		dprintk(KERN_INFO "FPR[%d] = 0x%x\n", i, f);
 	}
 #endif
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index a33ab8cc2cc..8d4e35f5372 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -144,7 +144,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
                                         unsigned int priority)
 {
 	int allowed = 0;
-	ulong msr_mask;
+	ulong uninitialized_var(msr_mask);
 	bool update_esr = false, update_dear = false;
 
 	switch (priority) {
@@ -485,8 +485,6 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	vcpu_load(vcpu);
-
 	regs->pc = vcpu->arch.pc;
 	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = vcpu->arch.ctr;
@@ -507,8 +505,6 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -516,8 +512,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	vcpu_load(vcpu);
-
 	vcpu->arch.pc = regs->pc;
 	kvmppc_set_cr(vcpu, regs->cr);
 	vcpu->arch.ctr = regs->ctr;
@@ -537,8 +531,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -569,9 +561,7 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 {
 	int r;
 
-	vcpu_load(vcpu);
 	r = kvmppc_core_vcpu_translate(vcpu, tr);
-	vcpu_put(vcpu);
 	return r;
 }
 
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index bc2b4004eb2..e8a00b0c444 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -164,7 +164,7 @@ static int __init kvmppc_e500_init(void)
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), 0, THIS_MODULE);
 }
 
-static void __init kvmppc_e500_exit(void)
+static void __exit kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S
index 2b340a3eee9..cb34bbe1611 100644
--- a/arch/powerpc/kvm/fpu.S
+++ b/arch/powerpc/kvm/fpu.S
@@ -271,3 +271,21 @@ FPD_THREE_IN(fmsub)
 FPD_THREE_IN(fmadd)
 FPD_THREE_IN(fnmsub)
 FPD_THREE_IN(fnmadd)
+
+_GLOBAL(kvm_cvt_fd)
+	lfd	0,0(r5)			/* load up fpscr value */
+	MTFSF_L(0)
+	lfs	0,0(r3)
+	stfd	0,0(r4)
+	mffs	0
+	stfd	0,0(r5)			/* save new fpscr value */
+	blr
+
+_GLOBAL(kvm_cvt_df)
+	lfd	0,0(r5)			/* load up fpscr value */
+	MTFSF_L(0)
+	lfd	0,0(r3)
+	stfs	0,0(r4)
+	mffs	0
+	stfd	0,0(r5)			/* save new fpscr value */
+	blr
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 9b8683f39e0..72a4ad86ee9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -36,11 +36,6 @@
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
-gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
-{
-	return gfn;
-}
-
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
 	return !(v->arch.msr & MSR_WE) || !!(v->arch.pending_exceptions);
@@ -287,7 +282,7 @@ static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu,
 static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu,
                                       struct kvm_run *run)
 {
-	u64 gpr;
+	u64 uninitialized_var(gpr);
 
 	if (run->mmio.len > sizeof(gpr)) {
 		printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len);
@@ -423,8 +418,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int r;
 	sigset_t sigsaved;
 
-	vcpu_load(vcpu);
-
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
@@ -456,8 +449,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	vcpu_put(vcpu);
-
 	return r;
 }
 
@@ -523,8 +514,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (copy_from_user(&irq, argp, sizeof(irq)))
 			goto out;
 		r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
-		break;
+		goto out;
 	}
+
 	case KVM_ENABLE_CAP:
 	{
 		struct kvm_enable_cap cap;
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 3040dac18a3..111da1c03a1 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -12,8 +12,8 @@ CFLAGS_REMOVE_code-patching.o = -pg
 CFLAGS_REMOVE_feature-fixups.o = -pg
 
 obj-y			:= string.o alloc.o \
-			   checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
+			   checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
index 70a9cd8a300..1c893f05d22 100644
--- a/arch/powerpc/lib/crtsavres.S
+++ b/arch/powerpc/lib/crtsavres.S
@@ -6,6 +6,7 @@
  *   Written By Michael Meissner
  *
  * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ * 64 bit additions from reading the PPC elf64abi document.
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -44,6 +45,8 @@
 
 #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
+#ifndef CONFIG_PPC64
+
 /* Routines for saving integer registers, called by the compiler.  */
 /* Called with r11 pointing to the stack header word of the caller of the */
 /* function, just beyond the end of the integer save area.  */
@@ -226,4 +229,130 @@ _GLOBAL(_rest32gpr_31_x)
 	mtlr	0
 	mr	1,11
 	blr
+
+#else /* CONFIG_PPC64 */
+
+.globl	_savegpr0_14
+_savegpr0_14:
+	std	r14,-144(r1)
+.globl	_savegpr0_15
+_savegpr0_15:
+	std	r15,-136(r1)
+.globl	_savegpr0_16
+_savegpr0_16:
+	std	r16,-128(r1)
+.globl	_savegpr0_17
+_savegpr0_17:
+	std	r17,-120(r1)
+.globl	_savegpr0_18
+_savegpr0_18:
+	std	r18,-112(r1)
+.globl	_savegpr0_19
+_savegpr0_19:
+	std	r19,-104(r1)
+.globl	_savegpr0_20
+_savegpr0_20:
+	std	r20,-96(r1)
+.globl	_savegpr0_21
+_savegpr0_21:
+	std	r21,-88(r1)
+.globl	_savegpr0_22
+_savegpr0_22:
+	std	r22,-80(r1)
+.globl	_savegpr0_23
+_savegpr0_23:
+	std	r23,-72(r1)
+.globl	_savegpr0_24
+_savegpr0_24:
+	std	r24,-64(r1)
+.globl	_savegpr0_25
+_savegpr0_25:
+	std	r25,-56(r1)
+.globl	_savegpr0_26
+_savegpr0_26:
+	std	r26,-48(r1)
+.globl	_savegpr0_27
+_savegpr0_27:
+	std	r27,-40(r1)
+.globl	_savegpr0_28
+_savegpr0_28:
+	std	r28,-32(r1)
+.globl	_savegpr0_29
+_savegpr0_29:
+	std	r29,-24(r1)
+.globl	_savegpr0_30
+_savegpr0_30:
+	std	r30,-16(r1)
+.globl	_savegpr0_31
+_savegpr0_31:
+	std	r31,-8(r1)
+	std	r0,16(r1)
+	blr
+
+.globl	_restgpr0_14
+_restgpr0_14:
+	ld	r14,-144(r1)
+.globl	_restgpr0_15
+_restgpr0_15:
+	ld	r15,-136(r1)
+.globl	_restgpr0_16
+_restgpr0_16:
+	ld	r16,-128(r1)
+.globl	_restgpr0_17
+_restgpr0_17:
+	ld	r17,-120(r1)
+.globl	_restgpr0_18
+_restgpr0_18:
+	ld	r18,-112(r1)
+.globl	_restgpr0_19
+_restgpr0_19:
+	ld	r19,-104(r1)
+.globl	_restgpr0_20
+_restgpr0_20:
+	ld	r20,-96(r1)
+.globl	_restgpr0_21
+_restgpr0_21:
+	ld	r21,-88(r1)
+.globl	_restgpr0_22
+_restgpr0_22:
+	ld	r22,-80(r1)
+.globl	_restgpr0_23
+_restgpr0_23:
+	ld	r23,-72(r1)
+.globl	_restgpr0_24
+_restgpr0_24:
+	ld	r24,-64(r1)
+.globl	_restgpr0_25
+_restgpr0_25:
+	ld	r25,-56(r1)
+.globl	_restgpr0_26
+_restgpr0_26:
+	ld	r26,-48(r1)
+.globl	_restgpr0_27
+_restgpr0_27:
+	ld	r27,-40(r1)
+.globl	_restgpr0_28
+_restgpr0_28:
+	ld	r28,-32(r1)
+.globl	_restgpr0_29
+_restgpr0_29:
+	ld	r0,16(r1)
+	ld	r29,-24(r1)
+	mtlr	r0
+	ld	r30,-16(r1)
+	ld	r31,-8(r1)
+	blr
+
+.globl	_restgpr0_30
+_restgpr0_30:
+	ld	r30,-16(r1)
+.globl	_restgpr0_31
+_restgpr0_31:
+	ld	r0,16(r1)
+	ld	r31,-8(r1)
+	mtlr	r0
+	blr
+
+#endif /* CONFIG_PPC64 */
+
 #endif
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index e640175b65a..0d08d017139 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -12,6 +12,7 @@
  *  2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -288,8 +289,8 @@ static void test_alternative_case_with_external_branch(void)
 
 static void test_cpu_macros(void)
 {
-	extern void ftr_fixup_test_FTR_macros;
-	extern void ftr_fixup_test_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FTR_macros;
+	extern u8 ftr_fixup_test_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
 			     &ftr_fixup_test_FTR_macros;
 
@@ -301,8 +302,8 @@ static void test_cpu_macros(void)
 static void test_fw_macros(void)
 {
 #ifdef CONFIG_PPC64
-	extern void ftr_fixup_test_FW_FTR_macros;
-	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FW_FTR_macros;
+	extern u8 ftr_fixup_test_FW_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
 			     &ftr_fixup_test_FW_FTR_macros;
 
@@ -314,10 +315,10 @@ static void test_fw_macros(void)
 
 static void test_lwsync_macros(void)
 {
-	extern void lwsync_fixup_test;
-	extern void end_lwsync_fixup_test;
-	extern void lwsync_fixup_test_expected_LWSYNC;
-	extern void lwsync_fixup_test_expected_SYNC;
+	extern u8 lwsync_fixup_test;
+	extern u8 end_lwsync_fixup_test;
+	extern u8 lwsync_fixup_test_expected_LWSYNC;
+	extern u8 lwsync_fixup_test_expected_SYNC;
 	unsigned long size = &end_lwsync_fixup_test -
 			     &lwsync_fixup_test;
 
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 65abfcfaaa9..1dc2fa5ce1b 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -135,7 +135,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 16 and 4 MiB
 	 * pages. Consequently, restrict the top end of RAM currently
-	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a719f53921a..3079f6b44cf 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -68,9 +68,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -347,9 +344,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -687,9 +681,6 @@ _GLOBAL(__hash_page_64K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3ecdcec0a39..09dffe6efa4 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,7 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -384,8 +384,8 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
-		lmb_reserve(phys_addr, block_size * expected_pages);
+	if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+		memblock_reserve(phys_addr, block_size * expected_pages);
 		add_gpage(phys_addr, block_size, expected_pages);
 	}
 	return 0;
@@ -458,7 +458,7 @@ static void __init htab_init_page_sizes(void)
 	 * and we have at least 1G of RAM at boot
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
-	    lmb_phys_mem_size() >= 0x40000000)
+	    memblock_phys_mem_size() >= 0x40000000)
 		mmu_vmemmap_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
 		mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@ static unsigned long __init htab_get_table_size(void)
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	mem_size = lmb_phys_mem_size();
+	mem_size = memblock_phys_mem_size();
 	rnd_mem_size = 1UL << __ilog2(mem_size);
 	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@ static void __init htab_initialize(void)
 		else
 			limit = 0;
 
-		table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+		table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
 
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
@@ -647,9 +647,9 @@ static void __init htab_initialize(void)
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
-						    1, lmb.rmo_size));
+	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+						    1, memblock.rmo_size));
 	memset(linear_map_hash_slots, 0, linear_map_hash_count);
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
@@ -659,16 +659,16 @@ static void __init htab_initialize(void)
 	 */
 
 	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = (unsigned long)__va(lmb.memory.region[i].base);
-		size = lmb.memory.region[i].size;
+	for (i=0; i < memblock.memory.cnt; i++) {
+		base = (unsigned long)__va(memblock.memory.region[i].base);
+		size = memblock.memory.region[i].size;
 
 		DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
 		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and
+		 * in such a way that it will not cross two memblock regions and
 		 * will fit within a single 16Mb page.
 		 * The DART space is assumed to be a full 16Mb region even if
 		 * we only use 2Mb of that space. We will use more of it later
@@ -871,6 +871,18 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
 }
 #endif
 
+void hash_failure_debug(unsigned long ea, unsigned long access,
+			unsigned long vsid, unsigned long trap,
+			int ssize, int psize, unsigned long pte)
+{
+	if (!printk_ratelimit())
+		return;
+	pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+		ea, access, current->comm);
+	pr_info("    trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+		trap, vsid, ssize, psize, pte);
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -955,6 +967,17 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		return 1;
 	}
 
+	/* Add _PAGE_PRESENT to the required access perm */
+	access |= _PAGE_PRESENT;
+
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
 #ifdef CONFIG_HUGETLB_PAGE
 	if (hugeshift)
 		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
 		pte_val(*(ptep + PTRS_PER_PTE)));
 #endif
-	/* Pre-check access permissions (will be re-checked atomically
-	 * in __hash_page_XX but this pre-check is a fast path
-	 */
-	if (access & ~pte_val(*ptep)) {
-		DBG_LOW(" no access !\n");
-		return 1;
-	}
-
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 					    local, ssize, spp);
 	}
 
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+				   pte_val(*ptep));
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
 #else
@@ -1051,8 +1072,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	void *pgdir;
 	pte_t *ptep;
 	unsigned long flags;
-	int local = 0;
-	int ssize;
+	int rc, ssize, local = 0;
 
 	BUG_ON(REGION_ID(ea) != USER_REGION_ID);
 
@@ -1098,11 +1118,18 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Hash it in */
 #ifdef CONFIG_PPC_HAS_HASH_64K
 	if (mm->context.user_psize == MMU_PAGE_64K)
-		__hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
-		__hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-			       subpage_protection(pgdir, ea));
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+				    subpage_protection(pgdir, ea));
+
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   mm->context.user_psize, pte_val(*ptep));
 
 	local_irq_restore(flags);
 }
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 199539882f9..cc5c273086c 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -21,21 +21,13 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	unsigned long old_pte, new_pte;
 	unsigned long va, rflags, pa, sz;
 	long slot;
-	int err = 1;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
 	va = hpt_va(ea, vsid, ssize);
 
-	/*
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
-	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
+	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
 	 *
 	 * 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 
 	do {
 		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/* Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access */
 		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -121,8 +121,16 @@ repeat:
                         }
 		}
 
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, old_pte);
+			return -1;
+		}
 
 		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
@@ -131,9 +139,5 @@ repeat:
 	 * No need to use ldarx/stdcx here
 	 */
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
-	err = 0;
-
- out:
-	return err;
+	return 0;
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 767333005eb..6a6975dc265 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,7 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
@@ -136,17 +136,17 @@ void __init MMU_init(void)
 	/* parse args from command line */
 	MMU_setup();
 
-	if (lmb.memory.cnt > 1) {
+	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		lmb.memory.cnt = 1;
-		lmb_analyze();
+		memblock.memory.cnt = 1;
+		memblock_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
 #endif
 	}
 
-	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
@@ -161,8 +161,8 @@ void __init MMU_init(void)
 		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(lowmem_end_addr);
-		lmb_analyze();
+		memblock_enforce_memory_limit(lowmem_end_addr);
+		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
@@ -200,7 +200,7 @@ void __init *early_get_page(void)
 	if (init_bootmem_done) {
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					__initial_memory_limit_addr));
 	}
 	return p;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index e267f223fdf..71f1415e247 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -40,7 +40,7 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 #include <linux/slab.h>
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0f594d774bf..1a84a8d0000 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -32,7 +32,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
@@ -83,13 +83,13 @@ int page_is_ram(unsigned long pfn)
 #else
 	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
-	for (i=0; i < lmb.memory.cnt; i++) {
+	for (i=0; i < memblock.memory.cnt; i++) {
 		unsigned long base;
 
-		base = lmb.memory.region[i].base;
+		base = memblock.memory.region[i].base;
 
 		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
+			(paddr < (base + memblock.memory.region[i].size))) {
 			return 1;
 		}
 	}
@@ -142,14 +142,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
  * memory range.  PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures.  Walk through the
+ * Instead it maintains it in memblock.memory structures.  Walk through the
  * memory regions, find holes and callback for contiguous regions.
  */
 int
 walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
-	struct lmb_property res;
+	struct memblock_property res;
 	unsigned long pfn, len;
 	u64 end;
 	int ret = -1;
@@ -158,7 +158,7 @@ walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 	res.size = (u64) nr_pages << PAGE_SHIFT;
 
 	end = res.base + res.size - 1;
-	while ((res.base < end) && (lmb_find(&res) >= 0)) {
+	while ((res.base < end) && (memblock_find(&res) >= 0)) {
 		pfn = (unsigned long)(res.base >> PAGE_SHIFT);
 		len = (unsigned long)(res.size >> PAGE_SHIFT);
 		ret = (*func)(pfn, len, arg);
@@ -184,8 +184,8 @@ void __init do_init_bootmem(void)
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
 	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -198,16 +198,16 @@ void __init do_init_bootmem(void)
 	 */
 	bootmap_pages = bootmem_bootmap_pages(total_pages);
 
-	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
 	boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
 
 	/* Add active regions with valid PFNs */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -218,17 +218,17 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long addr = lmb.reserved.region[i].base +
-				     lmb_size_bytes(&lmb.reserved, i) - 1;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long addr = memblock.reserved.region[i].base +
+				     memblock_size_bytes(&memblock.reserved, i) - 1;
 		if (addr < lowmem_end_addr)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+		else if (memblock.reserved.region[i].base < lowmem_end_addr) {
 			unsigned long adjusted_size = lowmem_end_addr -
-				      lmb.reserved.region[i].base;
-			reserve_bootmem(lmb.reserved.region[i].base,
+				      memblock.reserved.region[i].base;
+			reserve_bootmem(memblock.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
 		}
 	}
@@ -236,9 +236,9 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, max_pfn);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
+	for (i = 0; i < memblock.reserved.cnt; i++)
+		reserve_bootmem(memblock.reserved.region[i].base,
+				memblock_size_bytes(&memblock.reserved, i),
 				BOOTMEM_DEFAULT);
 
 #endif
@@ -251,20 +251,20 @@ void __init do_init_bootmem(void)
 /* mark pages that don't exist as nosave */
 static int __init mark_nonram_nosave(void)
 {
-	unsigned long lmb_next_region_start_pfn,
-		      lmb_region_max_pfn;
+	unsigned long memblock_next_region_start_pfn,
+		      memblock_region_max_pfn;
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt - 1; i++) {
-		lmb_region_max_pfn =
-			(lmb.memory.region[i].base >> PAGE_SHIFT) +
-			(lmb.memory.region[i].size >> PAGE_SHIFT);
-		lmb_next_region_start_pfn =
-			lmb.memory.region[i+1].base >> PAGE_SHIFT;
+	for (i = 0; i < memblock.memory.cnt - 1; i++) {
+		memblock_region_max_pfn =
+			(memblock.memory.region[i].base >> PAGE_SHIFT) +
+			(memblock.memory.region[i].size >> PAGE_SHIFT);
+		memblock_next_region_start_pfn =
+			memblock.memory.region[i+1].base >> PAGE_SHIFT;
 
-		if (lmb_region_max_pfn < lmb_next_region_start_pfn)
-			register_nosave_region(lmb_region_max_pfn,
-					       lmb_next_region_start_pfn);
+		if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+			register_nosave_region(memblock_region_max_pfn,
+					       memblock_next_region_start_pfn);
 	}
 
 	return 0;
@@ -275,8 +275,8 @@ static int __init mark_nonram_nosave(void)
  */
 void __init paging_init(void)
 {
-	unsigned long total_ram = lmb_phys_mem_size();
-	phys_addr_t top_of_ram = lmb_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
+	phys_addr_t top_of_ram = memblock_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -327,7 +327,7 @@ void __init mem_init(void)
 		swiotlb_init(1);
 #endif
 
-	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+	num_physpages = memblock.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -364,7 +364,7 @@ void __init mem_init(void)
 		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
-			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+			if (memblock_is_reserved(pfn << PAGE_SHIFT))
 				continue;
 			ClearPageReserved(page);
 			init_page_count(page);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 80d110635d2..aa731af720c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,7 +17,7 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/pfn.h>
 #include <asm/sparsemem.h>
@@ -351,7 +351,7 @@ struct of_drconf_cell {
 #define DRCONF_MEM_RESERVED	0x00000080
 
 /*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
 static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -372,8 +372,8 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
 /*
  * Retreive and validate the ibm,dynamic-memory property of the device tree.
  *
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries.  Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as layed out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -540,19 +540,19 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 						      unsigned long size)
 {
 	/*
-	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
+	 * We use memblock_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.  Also, in the case of
 	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (start + size <= lmb_end_of_DRAM())
+	if (start + size <= memblock_end_of_DRAM())
 		return size;
 
-	if (start >= lmb_end_of_DRAM())
+	if (start >= memblock_end_of_DRAM())
 		return 0;
 
-	return lmb_end_of_DRAM() - start;
+	return memblock_end_of_DRAM() - start;
 }
 
 /*
@@ -731,7 +731,7 @@ new_range:
 	}
 
 	/*
-	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
 	 * property in the ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -743,8 +743,8 @@ new_range:
 
 static void __init setup_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned long start_pfn, end_pfn;
 	unsigned int i, nid = 0;
 
@@ -753,9 +753,9 @@ static void __init setup_nonnuma(void)
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	for (i = 0; i < lmb.memory.cnt; ++i) {
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; ++i) {
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 
 		fake_numa_create_new_node(end_pfn, &nid);
 		add_active_range(nid, start_pfn, end_pfn);
@@ -813,7 +813,7 @@ static void __init dump_numa_memory_topology(void)
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM();
+		for (i = 0; i < memblock_end_of_DRAM();
 		     i += (1 << SECTION_SIZE_BITS)) {
 			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
@@ -833,7 +833,7 @@ static void __init dump_numa_memory_topology(void)
 }
 
 /*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
  * required. nid is the preferred node and end is the physical address of
  * the highest address in the node.
  *
@@ -847,11 +847,11 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 	int new_nid;
 	unsigned long ret_paddr;
 
-	ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret_paddr)
-		ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
 
 	if (!ret_paddr)
 		panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -861,14 +861,14 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 
 	/*
 	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the LMB allocator to the
+	 * and hand over control from the MEMBLOCK allocator to the
 	 * bootmem allocator.  If this function is called for
 	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the LMB allocator.
+	 * bootmem allocator instead of the MEMBLOCK allocator.
 	 *
 	 * So, check the nid from which this allocation came
 	 * and double check to see if we need to use bootmem
-	 * instead of the LMB.  We don't free the LMB memory
+	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
 	 * since it would be useless.
 	 */
 	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -893,9 +893,9 @@ static void mark_reserved_regions_for_nid(int nid)
 	struct pglist_data *node = NODE_DATA(nid);
 	int i;
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long physbase = memblock.reserved.region[i].base;
+		unsigned long size = memblock.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
 		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
@@ -903,7 +903,7 @@ static void mark_reserved_regions_for_nid(int nid)
 					     node->node_spanned_pages;
 
 		/*
-		 * Check to make sure that this lmb.reserved area is
+		 * Check to make sure that this memblock.reserved area is
 		 * within the bounds of the node that we care about.
 		 * Checking the nid of the start and end points is not
 		 * sufficient because the reserved area could span the
@@ -961,7 +961,7 @@ void __init do_init_bootmem(void)
 	int nid;
 
 	min_low_pfn = 0;
-	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
 	if (parse_numa_properties())
@@ -1038,7 +1038,7 @@ void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -1113,7 +1113,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
 /*
  * Find the node associated with a hot added memory section for memory
  * represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
@@ -1154,8 +1154,8 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr)
 
 /*
  * Find the node associated with a hot added memory section.  Section
- * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
  */
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 9fc02dc72ce..a87ead0138b 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -26,7 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgtable.h>
@@ -115,11 +115,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	struct page *ptepage;
 
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
 	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
 
 	ptepage = alloc_pages(flags, 0);
 	if (!ptepage)
@@ -202,7 +198,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
-	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+	    !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -335,7 +331,7 @@ void __init mapin_ram(void)
 		s = mmu_mapin_ram(top);
 		__mapin_ram_chunk(s, top);
 
-		top = lmb_end_of_DRAM();
+		top = memblock_end_of_DRAM();
 		s = wii_mmu_mapin_mem2(top);
 		__mapin_ram_chunk(s, top);
 	}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index d050fc8d971..21d6dfab794 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -34,7 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgalloc.h>
@@ -67,7 +67,7 @@ static void *early_alloc_pgtable(unsigned long size)
 	if (init_bootmem_done)
 		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
 	else
-		pt = __va(lmb_alloc_base(size, size,
+		pt = __va(memblock_alloc_base(size, size,
 					 __pa(MAX_DMA_ADDRESS)));
 	memset(pt, 0, size);
 
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f11c2cdcb0f..f8a01829d64 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
@@ -223,7 +223,7 @@ void __init MMU_init_hw(void)
 	 * Find some memory for the hash table.
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+	Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
 				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 687fddaa24c..446a01842a7 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,7 +12,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -252,7 +252,7 @@ void __init stabs_alloc(void)
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+		newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
 					 1<<SID_SHIFT);
 		newstab = (unsigned long)__va(newstab);
 
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index e81d5d67f83..d8695b02a96 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -34,7 +34,7 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -426,7 +426,7 @@ static void __early_init_mmu(int boot_cpu)
 	/* Set the global containing the top of the linear mapping
 	 * for use by the TLB miss code
 	 */
-	linear_map_top = lmb_end_of_DRAM();
+	linear_map_top = memblock_end_of_DRAM();
 
 	/* A sync won't hurt us after mucking around with
 	 * the MMU configuration
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2c9e5226729..7fd90d02d8c 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1077,7 +1077,7 @@ static int calculate_lfsr(int n)
 		index = ENTRIES-1;
 
 	/* make sure index is valid */
-	if ((index > ENTRIES) || (index < 0))
+	if ((index >= ENTRIES) || (index < 0))
 		index = ENTRIES-1;
 
 	return initial_lfsr[index];
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index eeba0a70e46..69d668c072a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -171,6 +171,17 @@ config ISS4xx
 	help
 	  This option enables support for the IBM ISS simulation environment
 
+config ICON
+	bool "Icon"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 440SPe
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index e8c23ccaa1f..5f7a29d7f59 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -61,7 +61,8 @@ static char *board[] __initdata = {
 	"amcc,redwood",
 	"amcc,sequoia",
 	"amcc,taishan",
-	"amcc,yosemite"
+	"amcc,yosemite",
+	"mosaixtech,icon"
 };
 
 static int __init ppc44x_probe(void)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index a55b0b6813e..76722532bd9 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -64,10 +64,19 @@ int mpc52xx_pm_prepare(void)
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	struct resource res;
 
 	/* map the whole register space */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+		of_node_put(np);
+		return -ENOSYS;
+	}
+
+	mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
 	of_node_put(np);
 	if (!mbar) {
 		pr_err("mpc52xx_pm_prepare(): could not map registers\n");
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 534c2ecc89d..2ab338c9ac3 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -16,7 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -100,7 +100,7 @@ void __init corenet_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 004b7d36cdb..f79f2f10214 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,7 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -94,7 +94,7 @@ static void __init mpc8536_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 544011a562f..8190bc25bf2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -190,7 +190,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f0684c8ac96..494513682d7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -33,7 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  * Setup the architecture
  *
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
@@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -271,13 +279,53 @@ static void __init mpc85xx_mds_setup_arch(void)
 						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 			}
 
+		} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+			/* Reset Micrel PHY */
+			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 		}
+
 		iounmap(bcsr_regs);
 	}
+
+	if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET           0x60
+#define MPC85xx_PMUXCR_QE0              0x00008000
+#define MPC85xx_PMUXCR_QE3              0x00001000
+#define MPC85xx_PMUXCR_QE9              0x00000040
+#define MPC85xx_PMUXCR_QE12             0x00000008
+		static __be32 __iomem *pmuxcr;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+
+		if (np) {
+			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+			if (!pmuxcr)
+				printk(KERN_EMERG "Error: Alternate function"
+					" signal multiplex control register not"
+					" mapped!\n");
+			else
+			/* P1021 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management singals in PMUXCR
+			 * register.
+			 */
+				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+						  MPC85xx_PMUXCR_QE3 |
+						  MPC85xx_PMUXCR_QE9 |
+						  MPC85xx_PMUXCR_QE12);
+
+			of_node_put(np);
+		}
+
+	}
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
@@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = {
 	{},
 };
 
+static struct of_device_id p1021_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void)
 
 	return 0;
 }
+
+static int __init p1021_publish_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+	return 0;
+}
+
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void)
 
 	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
-			MPIC_BROKEN_FRR_NIRQS,
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void)
 		if (!np)
 			return;
 	}
-	qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 	of_node_put(np);
 #endif				/* CONFIG_QUICC_ENGINE */
 }
@@ -426,3 +499,26 @@ define_machine(mpc8569_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init p1021_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+	.name		= "P1021 MDS",
+	.probe		= p1021_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
+
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 2aa69a69bcc..b11c3535f35 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -103,7 +103,7 @@ mpc86xx_hpcn_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 22667a09d40..3712900471b 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -29,7 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -845,10 +845,10 @@ static int __init cell_iommu_init_disabled(void)
 	/* If we found a DMA window, we check if it's big enough to enclose
 	 * all of physical memory. If not, we force enable IOMMU
 	 */
-	if (np && size < lmb_end_of_DRAM()) {
+	if (np && size < memblock_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
 		       " (%ldMB) smaller than total memory (%lldMB)\n",
-		       size >> 20, lmb_end_of_DRAM() >> 20);
+		       size >> 20, memblock_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
 
@@ -1064,9 +1064,9 @@ static int __init cell_iommu_fixed_mapping_init(void)
 	}
 
 	fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
-	fsize = lmb_phys_mem_size();
+	fsize = memblock_phys_mem_size();
 
-	if ((fbase + fsize) <= 0x800000000)
+	if ((fbase + fsize) <= 0x800000000ul)
 		hbase = 0; /* use the device tree window */
 	else {
 		/* If we're over 32 GB we need to cheat. We can't map all of
@@ -1169,7 +1169,7 @@ static int __init cell_iommu_init(void)
 	 * Note: should we make sure we have the IOMMU actually disabled ?
 	 */
 	if (iommu_is_off ||
-	    (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+	    (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;
 
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 174a04ac480..5cdcc7c8d97 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/kexec.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <mm/mmu_decl.h>
 
 #include <asm/io.h>
@@ -65,7 +65,7 @@ static int __init page_aligned(unsigned long x)
 
 void __init wii_memory_fixups(void)
 {
-	struct lmb_property *p = lmb.memory.region;
+	struct memblock_property *p = memblock.memory.region;
 
 	/*
 	 * This is part of a workaround to allow the use of two
@@ -77,7 +77,7 @@ void __init wii_memory_fixups(void)
 	 * between both ranges.
 	 */
 
-	BUG_ON(lmb.memory.cnt != 2);
+	BUG_ON(memblock.memory.cnt != 2);
 	BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
 
 	p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
@@ -92,11 +92,11 @@ void __init wii_memory_fixups(void)
 
 	p[0].size += wii_hole_size + p[1].size;
 
-	lmb.memory.cnt = 1;
-	lmb_analyze();
+	memblock.memory.cnt = 1;
+	memblock_analyze();
 
 	/* reserve the hole */
-	lmb_reserve(wii_hole_start, wii_hole_size);
+	memblock_reserve(wii_hole_start, wii_hole_size);
 
 	/* allow ioremapping the address space in the hole */
 	__allow_ioremap_reserved = 1;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 3fc2e6494b8..ab3962b0d24 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -445,7 +445,11 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	}
 
 	allocate_device_bars(pdev);
-	iseries_device_information(pdev, bus, *sub_bus);
+	if (likely(sub_bus))
+		iseries_device_information(pdev, bus, *sub_bus);
+	else
+		printk(KERN_ERR "PCI: Device node %s has missing or invalid "
+				"linux,subbus property\n", node->full_name);
 }
 
 /*
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 39df70529d2..3fff8d979b4 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -41,7 +41,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 7b1d608ea3c..1f9fb2c5776 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -204,7 +204,7 @@ int __init iob_init(struct device_node *dn)
 	pr_debug(" -> %s\n", __func__);
 
 	/* Allocate a spare page to map all invalid IOTLB pages. */
-	tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
+	tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
 	if (!tmp)
 		panic("IOBMAP: Cannot allocate spare page!");
 	/* Empty l1 is marked invalid */
@@ -275,7 +275,7 @@ void __init alloc_iobmap_l2(void)
 	return;
 #endif
 	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+	iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
 
 	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
 }
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index f1d0132ebcc..9deb274841f 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -51,7 +51,7 @@
 #include <linux/suspend.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -619,7 +619,7 @@ static int __init pmac_probe(void)
 	 * driver needs that. We have to allocate it now. We allocate 4k
 	 * (1 small page) for now.
 	 */
-	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+	smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL);
 #endif /* CONFIG_PMAC_SMU */
 
 	return 1;
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1e8a1e39dfe..2c0ed87f202 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 7925751e464..c2045880e67 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/cell-regs.h>
@@ -318,8 +318,8 @@ static int __init ps3_mm_add_memory(void)
 		return result;
 	}
 
-	lmb_add(start_addr, map.r1.size);
-	lmb_analyze();
+	memblock_add(start_addr, map.r1.size);
+	memblock_analyze();
 
 	result = online_pages(start_pfn, nr_pages);
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index dd521a181f2..5b759b66959 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,7 +24,7 @@
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 
@@ -723,7 +723,7 @@ static void os_area_queue_work(void)
  * flash to a high address in the boot memory region and then puts that RAM
  * address and the byte count into the repository for retrieval by the guest.
  * We copy the data we want into a static variable and allow the memory setup
- * by the HV to be claimed by the lmb manager.
+ * by the HV to be claimed by the memblock manager.
  *
  * The os area mirror will not be available to a second stage kernel, and
  * the header verify will fail.  In this case, the saved_params values will
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 01e7b5bb3c1..bc880366414 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -10,14 +10,14 @@
  */
 
 #include <linux/of.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <asm/firmware.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/sparsemem.h>
 
-static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
+static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
 {
 	unsigned long start, start_pfn;
 	struct zone *zone;
@@ -26,7 +26,7 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	start_pfn = base >> PAGE_SHIFT;
 
 	if (!pfn_valid(start_pfn)) {
-		lmb_remove(base, lmb_size);
+		memblock_remove(base, memblock_size);
 		return 0;
 	}
 
@@ -41,20 +41,20 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(base, lmb_size);
+	memblock_remove(base, memblock_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
 	start = (unsigned long)__va(base);
-	ret = remove_section_mapping(start, start + lmb_size);
+	ret = remove_section_mapping(start, start + memblock_size);
 
 	/* Ensure all vmalloc mappings are flushed in case they also
 	 * hit that section of memory
@@ -80,7 +80,7 @@ static int pseries_remove_memory(struct device_node *np)
 		return 0;
 
 	/*
-	 * Find the bae address and size of the lmb
+	 * Find the bae address and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -89,7 +89,7 @@ static int pseries_remove_memory(struct device_node *np)
 	base = *(unsigned long *)regs;
 	lmb_size = regs[3];
 
-	ret = pseries_remove_lmb(base, lmb_size);
+	ret = pseries_remove_memblock(base, lmb_size);
 	return ret;
 }
 
@@ -109,7 +109,7 @@ static int pseries_add_memory(struct device_node *np)
 		return 0;
 
 	/*
-	 * Find the base and size of the lmb
+	 * Find the base and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -121,7 +121,7 @@ static int pseries_add_memory(struct device_node *np)
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	ret = lmb_add(base, lmb_size);
+	ret = memblock_add(base, lmb_size);
 	return (ret < 0) ? -EINVAL : 0;
 }
 
@@ -142,10 +142,10 @@ static int pseries_drconf_memory(unsigned long *base, unsigned int action)
 	}
 
 	if (action == PSERIES_DRCONF_MEM_ADD) {
-		rc = lmb_add(*base, *lmb_size);
+		rc = memblock_add(*base, *lmb_size);
 		rc = (rc < 0) ? -EINVAL : 0;
 	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
-		rc = pseries_remove_lmb(*base, *lmb_size);
+		rc = pseries_remove_memblock(*base, *lmb_size);
 	} else {
 		rc = -EINVAL;
 	}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index d26182d42cb..395848e30c5 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -66,7 +66,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
+		/* can't move this out since we might cross MEMBLOCK boundary */
 		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 7ebd9e88d36..6e7742da007 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -255,12 +255,12 @@ void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
 
 /* ------------------------------------------------- */
 /**
- * release_memory_range -- release memory previously lmb_reserved
+ * release_memory_range -- release memory previously memblock_reserved
  * @start_pfn: starting physical frame number
  * @nr_pages: number of pages to free.
  *
  * This routine will release memory that had been previously
- * lmb_reserved in early boot. The released memory becomes
+ * memblock_reserved in early boot. The released memory becomes
  * available for genreal use.
  */
 static void release_memory_range(unsigned long start_pfn,
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index c8b96ed7c01..559db2b846a 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -36,7 +36,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -232,7 +232,7 @@ static int __init dart_init(struct device_node *dart_node)
 	 * that to work around what looks like a problem with the HT bridge
 	 * prefetching into invalid pages and corrupting data
 	 */
-	tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+	tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 	dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
 					 DARTMAP_RPNMASK);
 
@@ -407,7 +407,7 @@ void __init alloc_dart_table(void)
 	if (iommu_is_off)
 		return;
 
-	if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
+	if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
 		return;
 
 	/* 512 pages (2MB) is max DART tablesize. */
@@ -416,7 +416,7 @@ void __init alloc_dart_table(void)
 	 * will blow up an entire large page anyway in the kernel mapping
 	 */
 	dart_tablebase = (unsigned long)
-		abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+		abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
 
 	printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
 }
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index a7be144f587..962c2d8dd8d 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
  *
  * Author: Tony Li <tony.li@freescale.com>
  *	   Jason Jin <Jason.jin@freescale.com>
@@ -22,14 +22,20 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/mpic.h>
 #include "fsl_msi.h"
 
+LIST_HEAD(msi_head);
+
 struct fsl_msi_feature {
 	u32 fsl_pic_ip;
 	u32 msiir_offset;
 };
 
-static struct fsl_msi *fsl_msi;
+struct fsl_msi_cascade_data {
+	struct fsl_msi *msi_data;
+	int index;
+};
 
 static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
 {
@@ -54,10 +60,12 @@ static struct irq_chip fsl_msi_chip = {
 static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
 				irq_hw_number_t hw)
 {
+	struct fsl_msi *msi_data = h->host_data;
 	struct irq_chip *chip = &fsl_msi_chip;
 
 	irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
 
+	set_irq_chip_data(virq, msi_data);
 	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
 
 	return 0;
@@ -96,11 +104,12 @@ static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
 static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct msi_desc *entry;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
 		if (entry->irq == NO_IRQ)
 			continue;
+		msi_data = get_irq_data(entry->irq);
 		set_irq_msi(entry->irq, NULL);
 		msi_bitmap_free_hwirqs(&msi_data->bitmap,
 				       virq_to_hw(entry->irq), 1);
@@ -111,9 +120,10 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 }
 
 static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
-				  struct msi_msg *msg)
+				struct msi_msg *msg,
+				struct fsl_msi *fsl_msi_data)
 {
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data = fsl_msi_data;
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	u32 base = 0;
 
@@ -130,14 +140,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	int rc, hwirq;
+	int rc, hwirq = -ENOMEM;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+		list_for_each_entry(msi_data, &msi_head, list) {
+			hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+			if (hwirq >= 0)
+				break;
+		}
+
 		if (hwirq < 0) {
 			rc = hwirq;
 			pr_debug("%s: fail allocating msi interrupt\n",
@@ -154,25 +169,31 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			rc = -ENOSPC;
 			goto out_free;
 		}
+		set_irq_data(virq, msi_data);
 		set_irq_msi(virq, entry);
 
-		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
 		write_msi_msg(virq, &msg);
 	}
 	return 0;
 
 out_free:
+	/* free by the caller of this function */
 	return rc;
 }
 
 static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 	int msir_index = -1;
 	u32 msir_value = 0;
 	u32 intr_index;
 	u32 have_shift = 0;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq);
+	msi_data = cascade_data->msi_data;
 
 	raw_spin_lock(&desc->lock);
 	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
@@ -187,13 +208,13 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	if (unlikely(desc->status & IRQ_INPROGRESS))
 		goto unlock;
 
-	msir_index = (int)desc->handler_data;
+	msir_index = cascade_data->index;
 
 	if (msir_index >= NR_MSI_REG)
 		cascade_irq = NO_IRQ;
 
 	desc->status |= IRQ_INPROGRESS;
-	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
 	case FSL_PIC_IP_MPIC:
 		msir_value = fsl_msi_read(msi_data->msi_regs,
 			msir_index * 0x10);
@@ -229,6 +250,30 @@ unlock:
 	raw_spin_unlock(&desc->lock);
 }
 
+static int fsl_of_msi_remove(struct of_device *ofdev)
+{
+	struct fsl_msi *msi = ofdev->dev.platform_data;
+	int virq, i;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	if (msi->list.prev != NULL)
+		list_del(&msi->list);
+	for (i = 0; i < NR_MSI_REG; i++) {
+		virq = msi->msi_virqs[i];
+		if (virq != NO_IRQ) {
+			cascade_data = get_irq_data(virq);
+			kfree(cascade_data);
+			irq_dispose_mapping(virq);
+		}
+	}
+	if (msi->bitmap.bitmap)
+		msi_bitmap_free(&msi->bitmap);
+	iounmap(msi->msi_regs);
+	kfree(msi);
+
+	return 0;
+}
+
 static int __devinit fsl_of_msi_probe(struct of_device *dev,
 				const struct of_device_id *match)
 {
@@ -239,15 +284,18 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 	int virt_msir;
 	const u32 *p;
 	struct fsl_msi_feature *features = match->data;
+	struct fsl_msi_cascade_data *cascade_data = NULL;
+	int len;
+	u32 offset;
 
 	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
 
 	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
 	if (!msi) {
 		dev_err(&dev->dev, "No memory for MSI structure\n");
-		err = -ENOMEM;
-		goto error_out;
+		return -ENOMEM;
 	}
+	dev->dev.platform_data = msi;
 
 	msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
 				      NR_MSI_IRQS, &fsl_msi_host_ops, 0);
@@ -298,27 +346,47 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 		err = -EINVAL;
 		goto error_out;
 	}
+	offset = 0;
+	p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
+	if (p)
+		offset = *p / IRQS_PER_MSI_REG;
 
 	count /= sizeof(u32);
-	for (i = 0; i < count / 2; i++) {
-		if (i > NR_MSI_REG)
-			break;
+	for (i = 0; i < min(count / 2, NR_MSI_REG); i++) {
 		virt_msir = irq_of_parse_and_map(dev->dev.of_node, i);
 		if (virt_msir != NO_IRQ) {
-			set_irq_data(virt_msir, (void *)i);
+			cascade_data = kzalloc(
+					sizeof(struct fsl_msi_cascade_data),
+					GFP_KERNEL);
+			if (!cascade_data) {
+				dev_err(&dev->dev,
+					"No memory for MSI cascade data\n");
+				err = -ENOMEM;
+				goto error_out;
+			}
+			msi->msi_virqs[i] = virt_msir;
+			cascade_data->index = i + offset;
+			cascade_data->msi_data = msi;
+			set_irq_data(virt_msir, (void *)cascade_data);
 			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
 		}
 	}
 
-	fsl_msi = msi;
+	list_add_tail(&msi->list, &msi_head);
 
-	WARN_ON(ppc_md.setup_msi_irqs);
-	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
-	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
-	ppc_md.msi_check_device = fsl_msi_check_device;
+	/* The multiple setting ppc_md.setup_msi_irqs will not harm things */
+	if (!ppc_md.setup_msi_irqs) {
+		ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+		ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+		ppc_md.msi_check_device = fsl_msi_check_device;
+	} else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
+		dev_err(&dev->dev, "Different MSI driver already installed!\n");
+		err = -ENODEV;
+		goto error_out;
+	}
 	return 0;
 error_out:
-	kfree(msi);
+	fsl_of_msi_remove(dev);
 	return err;
 }
 
@@ -351,6 +419,7 @@ static struct of_platform_driver fsl_of_msi_driver = {
 		.of_match_table = fsl_of_msi_ids,
 	},
 	.probe = fsl_of_msi_probe,
+	.remove = fsl_of_msi_remove,
 };
 
 static __init int fsl_of_msi_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 331c7e7025b..624580c252d 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -32,8 +32,11 @@ struct fsl_msi {
 	u32 msi_addr_hi;
 	void __iomem *msi_regs;
 	u32 feature;
+	int msi_virqs[NR_MSI_REG];
 
 	struct msi_bitmap bitmap;
+
+	struct list_head list;          /* support multiple MSI banks */
 };
 
 #endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a14760fe513..356c6a0e1b2 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
 
@@ -190,7 +190,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
 
 	/* Setup inbound mem window */
-	mem = lmb_end_of_DRAM();
+	mem = memblock_end_of_DRAM();
 	sz = min(mem, paddr_lo);
 	mem_log = __ilog2_u64(sz);
 
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cd37e49e703..30e1626b2e8 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1426,7 +1426,7 @@ int fsl_rio_setup(struct of_device *dev)
 	port->iores.flags = IORESOURCE_MEM;
 	port->iores.name = "rio_io_win";
 
-	priv->pwirq   = irq_of_parse_and_map(dev->node, 0);
+	priv->pwirq   = irq_of_parse_and_map(dev->dev.of_node, 0);
 	priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
 	priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
 	priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d60284075..c0bb76ef724 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
  * also relocates SMC2, but this would require additional changes
  * to uart.c, so I am holding off on that for a moment.
  */
+#include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -16,6 +17,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
+#include <asm/cpm.h>
 #include <asm/cpm1.h>
 
 /*
@@ -24,7 +26,7 @@
 
 #ifdef CONFIG_I2C_SPI_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7FFFEFD9,
 	0x3FFD0000,
 	0x7FFB49F7,
@@ -143,7 +145,7 @@ uint patch_2000[] = {
 	0x5F8247F8
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3E303430,
 	0x34343737,
 	0xABF7BF9B,
@@ -182,7 +184,7 @@ uint patch_2f00[] = {
 
 #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x3fff0000,
 	0x3ffd0000,
 	0x3ffb0000,
@@ -505,7 +507,7 @@ uint patch_2000[] = {
 	0x6079e2bb
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x30303030,
 	0x3e3e3434,
 	0xabbf9b99,
@@ -572,7 +574,7 @@ uint patch_2f00[] = {
 	0xf22f3f23
 };
 
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
 	0x27eeeeee,
 	0xeeeeeeee,
 	0xeeeeeeee,
@@ -598,7 +600,7 @@ uint patch_2e00[] = {
 
 #ifdef CONFIG_USB_SOF_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7fff0000,
 	0x7ffd0000,
 	0x7ffb0000,
@@ -613,21 +615,25 @@ uint patch_2000[] = {
 	0x60750000
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3030304c,
 	0xcab9e441,
 	0xa1aaf220
 };
 #endif
 
-void
-cpm_load_patch(cpm8xx_t	*cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
 {
 	volatile uint		*dp;		/* Dual-ported RAM. */
 	volatile cpm8xx_t	*commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	volatile iic_t		*iip;
-	volatile spi_t		*spp;
+	volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 	volatile smc_uart_t	*smp;
+#endif
+#endif
 	int	i;
 
 	commproc = cp;
@@ -668,8 +674,8 @@ cpm_load_patch(cpm8xx_t	*cp)
 	/* Put SPI above the IIC, also 32-byte aligned.
 	*/
 	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
+	spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+	spp->rpbase = i;
 
 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
 	commproc->cp_cpmcr1 = 0x802a;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 2102487612a..20b73c025a4 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1666,7 +1666,7 @@ static int mpic_resume(struct sys_device *dev)
 			       mpic->save_data[i].dest);
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
-	{
+	if (mpic->fixups) {
 		struct mpic_irq_fixup *fixup = &mpic->fixups[i];
 
 		if (fixup->base) {
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 106d767bf65..156aa7d3625 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -974,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
 	.setup_utl	= ppc460ex_pciex_init_utl,
 };
 
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+	/* HSS drive amplitude */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+	/* HSS TX pre-emphasis */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+	/* HSS TX calibration control */
+	mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+	/* HSS TX slew control */
+	mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+	udelay(100);
+
+	/* De-assert PLLRESET */
+	dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+	/* Reset DL, UTL, GPL before configuration */
+	mtdcri(SDR0, PESDR0_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR1_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR2_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+	udelay(100);
+
+	/*
+	 * If bifurcation is not enabled, u-boot would have disabled the
+	 * third PCIe port
+	 */
+	if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+				0x00000001)) {
+		printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+		printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+		return 3;
+	}
+
+	printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+	return 2;
+}
+
+static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+	if (port->endpoint)
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0x01000000, 0);
+	else
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0, 0x01000000);
+
+	/*Gen-1*/
+	mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
+
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+			PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return 0;
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* Max 128 Bytes */
+	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.core_init	= ppc460sx_pciex_core_init,
+	.port_init_hw	= ppc460sx_pciex_init_port_hw,
+	.setup_utl	= ppc460sx_pciex_init_utl,
+};
+
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -1089,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 	}
 	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
 		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+		ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index d04e40b306f..56d9e5deccb 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -324,6 +324,64 @@
 #define PESDR0_460EX_IHS2		0x036D
 
 /*
+ * 460SX addtional DCRs
+ */
+#define PESDRn_460SX_RCEI		0x02
+
+#define PESDR0_460SX_HSSL0DAMP		0x320
+#define PESDR0_460SX_HSSL1DAMP		0x321
+#define PESDR0_460SX_HSSL2DAMP		0x322
+#define PESDR0_460SX_HSSL3DAMP		0x323
+#define PESDR0_460SX_HSSL4DAMP		0x324
+#define PESDR0_460SX_HSSL5DAMP		0x325
+#define PESDR0_460SX_HSSL6DAMP		0x326
+#define PESDR0_460SX_HSSL7DAMP		0x327
+
+#define PESDR1_460SX_HSSL0DAMP		0x354
+#define PESDR1_460SX_HSSL1DAMP		0x355
+#define PESDR1_460SX_HSSL2DAMP		0x356
+#define PESDR1_460SX_HSSL3DAMP		0x357
+
+#define PESDR2_460SX_HSSL0DAMP		0x384
+#define PESDR2_460SX_HSSL1DAMP		0x385
+#define PESDR2_460SX_HSSL2DAMP		0x386
+#define PESDR2_460SX_HSSL3DAMP		0x387
+
+#define PESDR0_460SX_HSSL0COEFA		0x328
+#define PESDR0_460SX_HSSL1COEFA		0x329
+#define PESDR0_460SX_HSSL2COEFA		0x32A
+#define PESDR0_460SX_HSSL3COEFA		0x32B
+#define PESDR0_460SX_HSSL4COEFA		0x32C
+#define PESDR0_460SX_HSSL5COEFA		0x32D
+#define PESDR0_460SX_HSSL6COEFA		0x32E
+#define PESDR0_460SX_HSSL7COEFA		0x32F
+
+#define PESDR1_460SX_HSSL0COEFA		0x358
+#define PESDR1_460SX_HSSL1COEFA		0x359
+#define PESDR1_460SX_HSSL2COEFA		0x35A
+#define PESDR1_460SX_HSSL3COEFA		0x35B
+
+#define PESDR2_460SX_HSSL0COEFA		0x388
+#define PESDR2_460SX_HSSL1COEFA		0x389
+#define PESDR2_460SX_HSSL2COEFA		0x38A
+#define PESDR2_460SX_HSSL3COEFA		0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV	0x339
+#define PESDR1_460SX_HSSL1CALDRV	0x361
+#define PESDR2_460SX_HSSL1CALDRV	0x391
+
+#define PESDR0_460SX_HSSSLEW		0x338
+#define PESDR1_460SX_HSSSLEW		0x360
+#define PESDR2_460SX_HSSSLEW		0x390
+
+#define PESDR0_460SX_HSSCTLSET		0x31E
+#define PESDR1_460SX_HSSCTLSET		0x352
+#define PESDR2_460SX_HSSCTLSET		0x382
+
+#define PESDR0_460SX_RCSSET		0x304
+#define PESDR1_460SX_RCSSET		0x344
+#define PESDR2_460SX_RCSSET		0x374
+/*
  * Of the above, some are common offsets from the base
  */
 #define PESDRn_UTLSET1			0x00
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 55c80ffd42b..92f1cb745d6 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -181,7 +181,7 @@ static int __init appldata_os_init(void)
 		goto out;
 	}
 
-	appldata_os_data = kzalloc(max_size, GFP_DMA);
+	appldata_os_data = kzalloc(max_size, GFP_KERNEL | GFP_DMA);
 	if (appldata_os_data == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index bcd6884985a..253f158db66 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Fri Apr  9 09:57:10 2010
+# Linux kernel version: 2.6.35-rc1
+# Fri Jun  4 11:32:40 2010
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -35,11 +35,13 @@ CONFIG_CONSTRUCTORS=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
@@ -77,6 +79,7 @@ CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_BLK_CGROUP is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -157,7 +160,6 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -166,7 +168,6 @@ CONFIG_BLOCK_COMPAT=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
@@ -247,7 +248,6 @@ CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 CONFIG_HOTPLUG_CPU=y
-# CONFIG_SCHED_BOOK is not set
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_AUDIT_ARCH=y
@@ -320,7 +320,6 @@ CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PROCESS_DEBUG is not set
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
@@ -457,6 +456,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
@@ -465,6 +465,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -525,6 +526,7 @@ CONFIG_NET_ACT_NAT=m
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
@@ -546,6 +548,7 @@ CONFIG_CAN_VCAN=m
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 # CONFIG_PCMCIA is not set
 CONFIG_CCW=y
 
@@ -728,6 +731,7 @@ CONFIG_VIRTIO_NET=m
 # Character devices
 #
 CONFIG_DEVKMEM=y
+# CONFIG_N_GSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -775,6 +779,7 @@ CONFIG_S390_TAPE_34XX=m
 # CONFIG_MONREADER is not set
 CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
+# CONFIG_RAMOOPS is not set
 
 #
 # PPS support
@@ -788,10 +793,6 @@ CONFIG_S390_VMUR=m
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
 # CONFIG_AUXDISPLAY is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -976,6 +977,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 # CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1010,6 +1012,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 CONFIG_KPROBE_EVENT=y
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_TRACEPOINTS is not set
 # CONFIG_SAMPLE_TRACE_EVENTS is not set
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 9b866816863..24aafa68b64 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -14,6 +14,6 @@
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 27605b62b98..cef7dbf69df 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -26,7 +26,7 @@
 
 struct sca_entry {
 	atomic_t scn;
-	__u64	reserved;
+	__u32	reserved;
 	__u64	sda;
 	__u64	reserved2[2];
 } __attribute__((packed));
@@ -41,7 +41,8 @@ struct sca_block {
 } __attribute__((packed));
 
 #define KVM_NR_PAGE_SIZES 2
-#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + ((x) - 1) * 8)
+#define KVM_HPAGE_GFN_SHIFT(x) (((x) - 1) * 8)
+#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + KVM_HPAGE_GFN_SHIFT(x))
 #define KVM_HPAGE_SIZE(x) (1UL << KVM_HPAGE_SHIFT(x))
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index d5e3e600744..bea9ee37ac9 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -535,8 +535,16 @@ pgm_no_vtime2:
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	la	%r8,0x7f
 	nr	%r8,%r3 		# clear per-event-bit and ilc
-	be	BASED(pgm_exit)		# only per or per+check ?
-	b	BASED(pgm_do_call)
+	be	BASED(pgm_exit2)	# only per or per+check ?
+	l	%r7,BASED(.Ljump_table)
+	sll	%r8,2
+	l	%r7,0(%r8,%r7)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r7		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	b	BASED(sysc_return)
 
 #
 # it was a single stepped SVC that is causing all the trouble
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index e7192e1cb67..8bccec15ea9 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -544,8 +544,16 @@ pgm_no_vtime2:
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lghi	%r8,0x7f
 	ngr	%r8,%r3			# clear per-event-bit and ilc
-	je	pgm_exit
-	j	pgm_do_call
+	je	pgm_exit2
+	sll	%r8,3
+	larl	%r1,pgm_check_table
+	lg	%r1,0(%r8,%r1)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r1		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	j	sysc_return
 
 #
 # it was a single stepped SVC that is causing all the trouble
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 639380a0c45..22cfd634c35 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,8 +55,10 @@ void *module_alloc(unsigned long size)
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
-	vfree(mod->arch.syminfo);
-	mod->arch.syminfo = NULL;
+	if (mod) {
+		vfree(mod->arch.syminfo);
+		mod->arch.syminfo = NULL;
+	}
 	vfree(module_region);
 }
 
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index c56d3f56d02..1f066e46e83 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -264,7 +264,7 @@ restore_registers:
 	lghi	%r2,0
 	br	%r14
 
-	.section .data.nosave,"aw",@progbits
+	.section .data..nosave,"aw",@progbits
 	.align	8
 .Ldisabled_wait_31:
 	.long  0x000a0000,0x00000000
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a2163c95eb9..15a7536452d 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -524,8 +524,11 @@ void etr_switch_to_local(void)
 	if (!etr_eacr.sl)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events)) {
+		etr_eacr.es = etr_eacr.sl = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -539,8 +542,11 @@ void etr_sync_check(void)
 	if (!etr_eacr.es)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SYNC_CHECK, &etr_events)) {
+		etr_eacr.es = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -902,7 +908,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	 * Do not try to get the alternate port aib if the clock
 	 * is not in sync yet.
 	 */
-	if (!check_sync_clock())
+	if (!eacr.es || !check_sync_clock())
 		return eacr;
 
 	/*
@@ -1064,7 +1070,7 @@ static void etr_work_fn(struct work_struct *work)
 	 * If the clock is in sync just update the eacr and return.
 	 * If there is no valid sync port wait for a port update.
 	 */
-	if (check_sync_clock() || sync_port < 0) {
+	if ((eacr.es && check_sync_clock()) || sync_port < 0) {
 		etr_update_eacr(eacr);
 		etr_set_tolec_timeout(now);
 		goto out_unlock;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 3ddc30895e3..f7b6df45d8b 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -135,7 +135,7 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 	if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
-		rc = __kvm_s390_vcpu_store_status(vcpu,
+		rc = kvm_s390_vcpu_store_status(vcpu,
 						  KVM_S390_STORE_STATUS_NOADDR);
 		if (rc >= 0)
 			rc = -EOPNOTSUPP;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 8093e6f47f4..4fe68650535 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -207,6 +207,7 @@ out_nokvm:
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	VCPU_EVENT(vcpu, 3, "%s", "free cpu");
+	clear_bit(63 - vcpu->vcpu_id, (unsigned long *) &vcpu->kvm->arch.sca->mcn);
 	if (vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda ==
 		(__u64) vcpu->arch.sie_block)
 		vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0;
@@ -296,7 +297,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
 	set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests);
-	vcpu->arch.sie_block->ecb   = 2;
+	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
@@ -329,6 +330,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 		kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
 	vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32);
 	vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
+	set_bit(63 - id, (unsigned long *) &kvm->arch.sca->mcn);
 
 	spin_lock_init(&vcpu->arch.local_int.lock);
 	INIT_LIST_HEAD(&vcpu->arch.local_int.list);
@@ -363,63 +365,49 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 
 static int kvm_arch_vcpu_ioctl_initial_reset(struct kvm_vcpu *vcpu)
 {
-	vcpu_load(vcpu);
 	kvm_s390_vcpu_initial_reset(vcpu);
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
-	vcpu_load(vcpu);
 	memcpy(&vcpu->arch.guest_gprs, &regs->gprs, sizeof(regs->gprs));
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
-	vcpu_load(vcpu);
 	memcpy(&regs->gprs, &vcpu->arch.guest_gprs, sizeof(regs->gprs));
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 				  struct kvm_sregs *sregs)
 {
-	vcpu_load(vcpu);
 	memcpy(&vcpu->arch.guest_acrs, &sregs->acrs, sizeof(sregs->acrs));
 	memcpy(&vcpu->arch.sie_block->gcr, &sregs->crs, sizeof(sregs->crs));
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 				  struct kvm_sregs *sregs)
 {
-	vcpu_load(vcpu);
 	memcpy(&sregs->acrs, &vcpu->arch.guest_acrs, sizeof(sregs->acrs));
 	memcpy(&sregs->crs, &vcpu->arch.sie_block->gcr, sizeof(sregs->crs));
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
-	vcpu_load(vcpu);
 	memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
 	vcpu->arch.guest_fpregs.fpc = fpu->fpc;
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
-	vcpu_load(vcpu);
 	memcpy(&fpu->fprs, &vcpu->arch.guest_fpregs.fprs, sizeof(fpu->fprs));
 	fpu->fpc = vcpu->arch.guest_fpregs.fpc;
-	vcpu_put(vcpu);
 	return 0;
 }
 
@@ -427,14 +415,12 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw)
 {
 	int rc = 0;
 
-	vcpu_load(vcpu);
 	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
 		rc = -EBUSY;
 	else {
 		vcpu->run->psw_mask = psw.mask;
 		vcpu->run->psw_addr = psw.addr;
 	}
-	vcpu_put(vcpu);
 	return rc;
 }
 
@@ -498,8 +484,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	int rc;
 	sigset_t sigsaved;
 
-	vcpu_load(vcpu);
-
 rerun_vcpu:
 	if (vcpu->requests)
 		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
@@ -568,8 +552,6 @@ rerun_vcpu:
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	vcpu_put(vcpu);
-
 	vcpu->stat.exit_userspace++;
 	return rc;
 }
@@ -589,7 +571,7 @@ static int __guestcopy(struct kvm_vcpu *vcpu, u64 guestdest, const void *from,
  * KVM_S390_STORE_STATUS_NOADDR: -> 0x1200 on 64 bit
  * KVM_S390_STORE_STATUS_PREFIXED: -> prefix
  */
-int __kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
+int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 {
 	const unsigned char archmode = 1;
 	int prefix;
@@ -651,45 +633,42 @@ int __kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	return 0;
 }
 
-static int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
-{
-	int rc;
-
-	vcpu_load(vcpu);
-	rc = __kvm_s390_vcpu_store_status(vcpu, addr);
-	vcpu_put(vcpu);
-	return rc;
-}
-
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
+	long r;
 
 	switch (ioctl) {
 	case KVM_S390_INTERRUPT: {
 		struct kvm_s390_interrupt s390int;
 
+		r = -EFAULT;
 		if (copy_from_user(&s390int, argp, sizeof(s390int)))
-			return -EFAULT;
-		return kvm_s390_inject_vcpu(vcpu, &s390int);
+			break;
+		r = kvm_s390_inject_vcpu(vcpu, &s390int);
+		break;
 	}
 	case KVM_S390_STORE_STATUS:
-		return kvm_s390_vcpu_store_status(vcpu, arg);
+		r = kvm_s390_vcpu_store_status(vcpu, arg);
+		break;
 	case KVM_S390_SET_INITIAL_PSW: {
 		psw_t psw;
 
+		r = -EFAULT;
 		if (copy_from_user(&psw, argp, sizeof(psw)))
-			return -EFAULT;
-		return kvm_arch_vcpu_ioctl_set_initial_psw(vcpu, psw);
+			break;
+		r = kvm_arch_vcpu_ioctl_set_initial_psw(vcpu, psw);
+		break;
 	}
 	case KVM_S390_INITIAL_RESET:
-		return kvm_arch_vcpu_ioctl_initial_reset(vcpu);
+		r = kvm_arch_vcpu_ioctl_initial_reset(vcpu);
+		break;
 	default:
-		;
+		r = -EINVAL;
 	}
-	return -EINVAL;
+	return r;
 }
 
 /* Section: memory related */
@@ -744,11 +723,6 @@ void kvm_arch_flush_shadow(struct kvm *kvm)
 {
 }
 
-gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
-{
-	return gfn;
-}
-
 static int __init kvm_s390_init(void)
 {
 	int ret;
@@ -761,7 +735,7 @@ static int __init kvm_s390_init(void)
 	 * to hold the maximum amount of facilites. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
-	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if (!facilities) {
 		kvm_exit();
 		return -ENOMEM;
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index cfa9d177745..a7b7586626d 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -92,7 +92,7 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
 int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu);
 
 /* implemented in kvm-s390.c */
-int __kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu,
+int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu,
 				 unsigned long addr);
 /* implemented in diag.c */
 int kvm_s390_handle_diag(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index eff3c5989b4..702276f5e2f 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -113,7 +113,7 @@ static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)
 {
 	struct kvm_s390_interrupt_info *inti;
 
-	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+	inti = kzalloc(sizeof(*inti), GFP_ATOMIC);
 	if (!inti)
 		return -ENOMEM;
 	inti->type = KVM_S390_SIGP_STOP;
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 6409fd57eb0..3cc95dd0a3a 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -105,7 +105,7 @@ static int
 dcss_set_subcodes(void)
 {
 #ifdef CONFIG_64BIT
-	char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+	char *name = kmalloc(8 * sizeof(char), GFP_KERNEL | GFP_DMA);
 	unsigned long rx, ry;
 	int rc;
 
@@ -252,12 +252,13 @@ dcss_diag_translate_rc (int vm_rc) {
 static int
 query_segment_type (struct dcss_segment *seg)
 {
-	struct qin64  *qin = kmalloc (sizeof(struct qin64), GFP_DMA);
-	struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);
-
-	int diag_cc, rc, i;
 	unsigned long dummy, vmrc;
+	int diag_cc, rc, i;
+	struct qout64 *qout;
+	struct qin64 *qin;
 
+	qin = kmalloc(sizeof(*qin), GFP_KERNEL | GFP_DMA);
+	qout = kmalloc(sizeof(*qout), GFP_KERNEL | GFP_DMA);
 	if ((qin == NULL) || (qout == NULL)) {
 		rc = -ENOMEM;
 		goto out_free;
@@ -286,7 +287,7 @@ query_segment_type (struct dcss_segment *seg)
 	   copy data for the new format. */
 	if (segext_scode == DCSS_SEGEXT) {
 		struct qout64_old *qout_old;
-		qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+		qout_old = kzalloc(sizeof(*qout_old), GFP_KERNEL | GFP_DMA);
 		if (qout_old == NULL) {
 			rc = -ENOMEM;
 			goto out_free;
@@ -407,11 +408,11 @@ segment_overlaps_others (struct dcss_segment *seg)
 static int
 __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
 {
-	struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
-			GFP_DMA);
-	int rc, diag_cc;
 	unsigned long start_addr, end_addr, dummy;
+	struct dcss_segment *seg;
+	int rc, diag_cc;
 
+	seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
 	if (seg == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c5ee4ce60b5..82868fee21f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,8 +9,8 @@ config SUPERH
 	def_bool y
 	select EMBEDDED
 	select HAVE_CLK
-	select HAVE_IDE
-	select HAVE_LMB
+	select HAVE_IDE if HAS_IOPORT
+	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_ARCH_TRACEHOOK
@@ -174,6 +174,9 @@ config ARCH_HAS_DEFAULT_IDLE
 config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
+config NO_IOPORT
+	bool
+
 config IO_TRAPPED
 	bool
 
@@ -776,6 +779,17 @@ config ENTRY_OFFSET
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"
 
+config ROMIMAGE_MMCIF
+	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+	depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+	help
+	  Say Y here to include experimental MMCIF loading code in
+	  romImage. With this enabled it is possible to write the romImage
+	  kernel image to an MMC card and boot the kernel straight from
+	  the reset vector. At reset the processor Mask ROM will load the
+	  first part of the romImage which in turn loads the rest the kernel
+	  image to RAM using the MMCIF hardware block.
+
 choice
 	prompt "Kernel command line"
 	optional
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 938e87d5148..07b35ca2f64 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -154,6 +154,7 @@ config SH_SDK7786
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 	help
 	  Select SDK7786 if configuring for a Renesas Technology Europe
 	  SH7786-65nm board.
@@ -190,6 +191,7 @@ config SH_URQUELL
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
@@ -286,6 +288,7 @@ config SH_LBOX_RE2
 config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT if !PCI
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 57e37e28420..de375b64e41 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -316,7 +316,7 @@ static struct soc_camera_platform_info camera_info = {
 	.format_name = "UYVY",
 	.format_depth = 16,
 	.format = {
-		.code = V4L2_MBUS_FMT_YUYV8_2X8_BE,
+		.code = V4L2_MBUS_FMT_UYVY8_2X8,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 		.field = V4L2_FIELD_NONE,
 		.width = 640,
@@ -328,7 +328,7 @@ static struct soc_camera_platform_info camera_info = {
 	.set_capture = camera_set_capture,
 };
 
-struct soc_camera_link camera_link = {
+static struct soc_camera_link camera_link = {
 	.bus_id		= 0,
 	.add_device	= ap325rxa_camera_add,
 	.del_device	= ap325rxa_camera_del,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 49714258732..1d7b495a7db 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -12,6 +12,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
@@ -23,10 +25,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_msiof.h>
 #include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
@@ -139,7 +139,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 	.ether_link_active_low = 1
@@ -159,7 +159,7 @@ static struct platform_device sh_eth_device = {
 };
 
 /* USB0 host */
-void usb0_port_power(int port, int power)
+static void usb0_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB4, power);
 }
@@ -195,7 +195,7 @@ static struct platform_device usb0_host_device = {
 };
 
 /* USB1 host/function */
-void usb1_port_power(int port, int power)
+static void usb1_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB5, power);
 }
@@ -421,7 +421,7 @@ static int ts_init(void)
 	return 0;
 }
 
-struct tsc2007_platform_data tsc2007_info = {
+static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
 	.get_pendown_state	= ts_get_pendown_state,
@@ -436,7 +436,7 @@ static struct i2c_board_info ts_i2c_clients = {
 };
 
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
-/* SHDI0 */
+/* SDHI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB6, state);
@@ -474,7 +474,8 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
-/* SHDI1 */
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB7, state);
@@ -511,6 +512,7 @@ static struct platform_device sdhi1_device = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
 };
+#endif /* CONFIG_MMC_SH_MMCIF */
 
 #else
 
@@ -720,7 +722,7 @@ static struct clk fsimckb_clk = {
 	.rate		= 0, /* unknown */
 };
 
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.portb_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -777,7 +779,7 @@ static struct platform_device irda_device = {
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -786,7 +788,7 @@ static struct i2c_board_info ak8813 = {
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
@@ -819,6 +821,58 @@ static struct platform_device vou_device = {
 	},
 };
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+/* SH_MMCIF */
+static void mmcif_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static void mmcif_down_pwr(struct platform_device *pdev)
+{
+	gpio_set_value(GPIO_PTB7, 0);
+}
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.set_pwr	= mmcif_set_pwr,
+	.down_pwr	= mmcif_down_pwr,
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -831,7 +885,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&keysc_device,
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
 	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	&sdhi1_device,
+#endif
 #else
 	&msiof0_device,
 #endif
@@ -841,6 +897,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&fsi_device,
 	&irda_device,
 	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF)
+	&sh_mmcif_device,
+#endif
 };
 
 #ifdef CONFIG_I2C
@@ -1134,6 +1193,7 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTB6, NULL);
 	gpio_direction_output(GPIO_PTB6, 0);
 
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
 	gpio_request(GPIO_FN_SDHI1CD,  NULL);
 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
@@ -1148,6 +1208,7 @@ static int __init arch_setup(void)
 
 	/* I/O buffer drive ability is high for SDHI1 */
 	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif /* CONFIG_MMC_SH_MMCIF */
 #else
 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1223,6 +1284,25 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTU5, NULL);
 	gpio_direction_output(GPIO_PTU5, 0);
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* I/O buffer drive ability is high for MMCIF */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 87185de2044..662debe4ead 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -181,7 +181,7 @@ static int migor_nand_flash_ready(struct mtd_info *mtd)
 	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
 }
 
-struct platform_nand_data migor_nand_flash_data = {
+static struct platform_nand_data migor_nand_flash_data = {
 	.chip = {
 		.nr_chips = 1,
 		.partitions = migor_nand_flash_partitions,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index f9b82546c2d..552ebd9ba82 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,7 +283,7 @@ static struct clk fsimcka_clk = {
 };
 
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -371,7 +371,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8187 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 };
@@ -535,7 +535,7 @@ static struct platform_device irda_device = {
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -545,7 +545,7 @@ static struct i2c_board_info ak8813 = {
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
index f02382ae5c4..862d7480823 100644
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ b/arch/sh/boot/compressed/vmlinux.scr
@@ -1,6 +1,6 @@
 SECTIONS
 {
-  .rodata.compressed : {
+  .rodata..compressed : {
 	input_len = .;
 	LONG(input_data_end - input_data) input_data = .;
 	*(.data)
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index f473a24a2d9..2216ee57f25 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -1,16 +1,21 @@
 #
 # linux/arch/sh/boot/romimage/Makefile
 #
-# create an image suitable for burning to flash from zImage
+# create an romImage file suitable for burning to flash/mmc from zImage
 #
 
 targets		:= vmlinux head.o zeropage.bin piggy.o
+load-y		:= 0
 
-OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724)	:= 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724)	:= $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
 		   -T $(obj)/../../kernel/vmlinux.lds
 
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 93e779a405e..4671d1b8215 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -12,8 +12,40 @@ romstart:
 	/* include board specific setup code */
 #include <mach/romimage.h>
 
+#ifdef CONFIG_ROMIMAGE_MMCIF
+	/* load the romImage to above the empty zero page */
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	bytes_to_load, r5
+	mov.l	loader_function, r7
+	jsr	@r7
+	 mov	r4, r15
+
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	loaded_code_offs, r5
+	add	r5, r4
+	jmp	@r4
+	 nop
+
+	.balign 4
+empty_zero_page_dst_adj:
+	.long	PAGE_SIZE
+bytes_to_load:
+	.long	end_data - romstart
+loader_function:
+	.long	mmcif_loader
+loaded_code_offs:
+	.long	loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
 	/* copy the empty_zero_page contents to where vmlinux expects it */
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
 	mov.l	empty_zero_page_dst, r1
 	mov	#(PAGE_SHIFT - 4), r4
 	mov	#1, r3
@@ -37,7 +69,9 @@ romstart:
 	mov	#PAGE_SHIFT, r4
 	mov	#1, r1
 	shld	r4, r1
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	add	r1, r0
+	mov.l	extra_data_size, r1
 	add	r1, r0
 	jmp	@r0
 	 nop
@@ -45,4 +79,6 @@ romstart:
 	.align 2
 empty_zero_page_dst:
 	.long	_text
-empty_zero_page_src:
+extra_data_pos:
+extra_data_size:
+	.long	zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 00000000000..14863d7292c
--- /dev/null
+++ b/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,72 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE      (void __iomem *)0xa4ca0000
+
+#define MSTPCR2		0xa4150038
+#define PTWCR		0xa4050146
+#define PTXCR		0xa4050148
+#define PSELA		0xa405014e
+#define PSELE		0xa4050156
+#define HIZCRC		0xa405015c
+#define DRVCRA		0xa405018a
+
+enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
+       MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* enable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+	/* setup pins D7-D0 */
+	__raw_writew(0x0000, PTWCR);
+
+	/* setup pins MMC_CLK, MMC_CMD */
+	__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+	/* select D3-D0 pin function */
+	__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+	/* select D7-D4 pin function */
+	__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+	/* disable Hi-Z for the MMC pins */
+	__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+	/* high drive capability for MMC pins */
+	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
+
+	/* disable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index 287c08f8b4b..590394e2f5f 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -1,6 +1,8 @@
 SECTIONS
 {
   .text : {
+	zero_page_pos = .;
 	*(.data)
+	end_data = .;
 	}
 }
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 953af139e23..1e9598d2bbf 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -139,8 +139,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		if (!dev->resource[i].start)
 			continue;
-		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
-			continue;
 		if (dev->resource[i].flags & IORESOURCE_IO)
 			offset = hose->io_offset;
 		else if (dev->resource[i].flags & IORESOURCE_MEM)
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
index e461d67f03c..ef9e555aafb 100644
--- a/arch/sh/include/asm/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -14,7 +14,7 @@
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #ifndef __ASSEMBLY__
 struct cache_info {
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f689554e17c..b237d525d59 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -39,6 +39,8 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
+#ifdef CONFIG_HAS_IOPORT
+
 #define inb(p)			sh_mv.mv_inb((p))
 #define inw(p)			sh_mv.mv_inw((p))
 #define inl(p)			sh_mv.mv_inl((p))
@@ -60,6 +62,8 @@
 #define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
 #define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
 
+#endif
+
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -240,6 +244,8 @@ __BUILD_MEMORY_STRING(q, u64)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_HAS_IOPORT
+
 /*
  * This function provides a method for the generic case where a
  * board-specific ioport_map simply needs to return the port + some
@@ -255,6 +261,8 @@ static inline void __set_io_port_base(unsigned long pbase)
 
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
+#endif
+
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
 void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
deleted file mode 100644
index 9b437f657ff..00000000000
--- a/arch/sh/include/asm/lmb.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_LMB_H
-#define __ASM_SH_LMB_H
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index bc0218cb72e..a0b0cf79cf8 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,6 +19,10 @@ struct sh_machine_vector {
 	const char *mv_name;
 	int mv_nr_irqs;
 
+	int (*mv_irq_demux)(int irq);
+	void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT
 	u8 (*mv_inb)(unsigned long);
 	u16 (*mv_inw)(unsigned long);
 	u32 (*mv_inl)(unsigned long);
@@ -40,12 +44,9 @@ struct sh_machine_vector {
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	int (*mv_irq_demux)(int irq);
-
-	void (*mv_init_irq)(void);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
+#endif
 
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
new file mode 100644
index 00000000000..dfe683b8807
--- /dev/null
+++ b/arch/sh/include/asm/memblock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_MEMBLOCK_H
+#define __ASM_SH_MEMBLOCK_H
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index fbbf550cc52..4c27b68789b 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
  * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
  * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
  * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
  */
 
 /* Pin Function Controller:
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e24112d8..08fb42269ec 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
 /* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787ecb1c..1dcf5e6c8d8 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* EcoVec board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
 	.align 2
 1 :	.long 0xa8000000
 2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823f2bd..976256a323f 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* kfr2r09 board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
 	.align 2
 1:	.long 0xa8000000
 2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 650b92f00ee..e25f3c69525 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -12,7 +12,7 @@ endif
 CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
-	   idle.o io.o io_generic.o irq.o				\
+	   idle.o io.o irq.o						\
 	   irq_$(BITS).o machvec.o nmi_debug.o process.o		\
 	   process_$(BITS).o ptrace_$(BITS).o				\
 	   reboot.o return_address.o					\
@@ -39,6 +39,7 @@ obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 886d7d83ace..49c09c7d5b7 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -49,6 +49,8 @@ static DEFINE_SPINLOCK(dwarf_fde_lock);
 
 static struct dwarf_cie *cached_cie;
 
+static unsigned int dwarf_unwinder_ready;
+
 /**
  *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
  *	@frame: the DWARF frame whose list of registers we insert on
@@ -582,6 +584,13 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	unsigned long addr;
 
 	/*
+	 * If we've been called in to before initialization has
+	 * completed, bail out immediately.
+	 */
+	if (!dwarf_unwinder_ready)
+		return NULL;
+
+	/*
 	 * If we're starting at the top of the stack we need get the
 	 * contents of a physical register to get the CFA in order to
 	 * begin the virtual unwinding of the stack.
@@ -1167,7 +1176,7 @@ void module_dwarf_cleanup(struct module *mod)
  */
 static int __init dwarf_unwinder_init(void)
 {
-	int err;
+	int err = -ENOMEM;
 
 	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
 			sizeof(struct dwarf_frame), 0,
@@ -1181,11 +1190,15 @@ static int __init dwarf_unwinder_init(void)
 					  mempool_alloc_slab,
 					  mempool_free_slab,
 					  dwarf_frame_cachep);
+	if (!dwarf_frame_pool)
+		goto out;
 
 	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
 					 mempool_alloc_slab,
 					 mempool_free_slab,
 					 dwarf_reg_cachep);
+	if (!dwarf_reg_pool)
+		goto out;
 
 	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
 	if (err)
@@ -1195,11 +1208,13 @@ static int __init dwarf_unwinder_init(void)
 	if (err)
 		goto out;
 
+	dwarf_unwinder_ready = 1;
+
 	return 0;
 
 out:
 	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
 	dwarf_unwinder_cleanup();
-	return -EINVAL;
+	return err;
 }
 early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4770c241c67..5c51b794ba2 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -112,25 +112,3 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
         }
 }
 EXPORT_SYMBOL(memset_io);
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index e1e1dbd1955..447d78f666f 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -158,3 +158,23 @@ void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 void generic_ioport_unmap(void __iomem *addr)
 {
 }
+
+#ifndef CONFIG_GENERIC_IOMAP
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 4a8bb4eeb8a..2947d2bd129 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -91,10 +91,14 @@ int register_trapped_io(struct trapped_io *tiop)
 	tiop->magic = IO_TRAPPED_MAGIC;
 	INIT_LIST_HEAD(&tiop->list);
 	spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT
 	if (flags & IORESOURCE_IO)
 		list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
 	if (flags & IORESOURCE_MEM)
 		list_add(&tiop->list, &trapped_mem);
+#endif
 	spin_unlock_irq(&trapped_lock);
 
 	return 0;
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5a559e666eb..e2a3af31ff9 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -15,7 +15,7 @@
 #include <linux/numa.h>
 #include <linux/ftrace.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -157,10 +157,10 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -172,14 +172,14 @@ void __init reserve_crashkernel(void)
 
 	crash_size = PAGE_ALIGN(crashk_res.end - crashk_res.start + 1);
 	if (!crashk_res.start) {
-		unsigned long max = lmb_end_of_DRAM() - memory_limit;
-		crashk_res.start = __lmb_alloc_base(crash_size, PAGE_SIZE, max);
+		unsigned long max = memblock_end_of_DRAM() - memory_limit;
+		crashk_res.start = __memblock_alloc_base(crash_size, PAGE_SIZE, max);
 		if (!crashk_res.start) {
 			pr_err("crashkernel allocation failed\n");
 			goto disable;
 		}
 	} else {
-		ret = lmb_reserve(crashk_res.start, crash_size);
+		ret = memblock_reserve(crashk_res.start, crash_size);
 		if (unlikely(ret < 0)) {
 			pr_err("crashkernel reservation failed - "
 			       "memory is in use\n");
@@ -192,7 +192,7 @@ void __init reserve_crashkernel(void)
 	/*
 	 * Crash kernel trumps memory limit
 	 */
-	if ((lmb_end_of_DRAM() - memory_limit) <= crashk_res.end) {
+	if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
 		memory_limit = 0;
 		pr_info("Disabled memory limit for crashkernel\n");
 	}
@@ -201,7 +201,7 @@ void __init reserve_crashkernel(void)
 		"for crashkernel (System RAM: %ldMB)\n",
 		(unsigned long)(crash_size >> 20),
 		(unsigned long)(crashk_res.start),
-		(unsigned long)(lmb_phys_mem_size() >> 20));
+		(unsigned long)(memblock_phys_mem_size() >> 20));
 
 	return;
 
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 85cfaf916fd..9f9bb63616a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,6 +118,14 @@ void __init sh_mv_setup(void)
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
+#ifdef CONFIG_HAS_IOPORT
+
+#ifdef P2SEG
+	__set_io_port_base(P2SEG);
+#else
+	__set_io_port_base(0);
+#endif
+
 	mv_set(inb);	mv_set(inw);	mv_set(inl);
 	mv_set(outb);	mv_set(outw);	mv_set(outl);
 
@@ -129,16 +137,13 @@ void __init sh_mv_setup(void)
 
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
+
+#endif
+
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
 }
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
index cbf1dd5372b..5124aeb28c3 100644
--- a/arch/sh/kernel/return_address.c
+++ b/arch/sh/kernel/return_address.c
@@ -24,6 +24,8 @@ void *return_address(unsigned int depth)
 		struct dwarf_frame *tmp;
 
 		tmp = dwarf_unwind_stack(ra, frame);
+		if (!tmp)
+			return NULL;
 
 		if (frame)
 			dwarf_free_frame(frame);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 272734681d2..e769401a78b 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -141,10 +141,10 @@ void __init check_for_initrd(void)
 		goto disable;
 	}
 
-	if (unlikely(end > lmb_end_of_DRAM())) {
+	if (unlikely(end > memblock_end_of_DRAM())) {
 		pr_err("initrd extends beyond end of memory "
 		       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-		       end, (unsigned long)lmb_end_of_DRAM());
+		       end, (unsigned long)memblock_end_of_DRAM());
 		goto disable;
 	}
 
@@ -161,7 +161,7 @@ void __init check_for_initrd(void)
 	initrd_start = (unsigned long)__va(__pa(start));
 	initrd_end = initrd_start + INITRD_SIZE;
 
-	lmb_reserve(__pa(initrd_start), INITRD_SIZE);
+	memblock_reserve(__pa(initrd_start), INITRD_SIZE);
 
 	return;
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 46f84de6246..d0e249100e9 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -16,7 +16,7 @@
 #include <linux/pagemap.h>
 #include <linux/percpu.h>
 #include <linux/io.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/dma-mapping.h>
 #include <asm/mmu_context.h>
 #include <asm/mmzone.h>
@@ -33,7 +33,7 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
 void __init generic_mem_init(void)
 {
-	lmb_add(__MEMORY_START, __MEMORY_SIZE);
+	memblock_add(__MEMORY_START, __MEMORY_SIZE);
 }
 
 void __init __weak plat_mem_setup(void)
@@ -176,12 +176,12 @@ void __init allocate_pgdat(unsigned int nid)
 	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	phys = __lmb_alloc_base(sizeof(struct pglist_data),
+	phys = __memblock_alloc_base(sizeof(struct pglist_data),
 				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
 	/* Retry with all of system memory */
 	if (!phys)
-		phys = __lmb_alloc_base(sizeof(struct pglist_data),
-					SMP_CACHE_BYTES, lmb_end_of_DRAM());
+		phys = __memblock_alloc_base(sizeof(struct pglist_data),
+					SMP_CACHE_BYTES, memblock_end_of_DRAM());
 	if (!phys)
 		panic("Can't allocate pgdat for node %d\n", nid);
 
@@ -212,7 +212,7 @@ static void __init bootmem_init_one_node(unsigned int nid)
 
 	total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
 
-	paddr = lmb_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
+	paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
 	if (!paddr)
 		panic("Can't allocate bootmap for nid[%d]\n", nid);
 
@@ -227,9 +227,9 @@ static void __init bootmem_init_one_node(unsigned int nid)
 	 */
 	if (nid == 0) {
 		/* Reserve the sections we're already using. */
-		for (i = 0; i < lmb.reserved.cnt; i++)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+		for (i = 0; i < memblock.reserved.cnt; i++)
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
 	}
 
@@ -241,10 +241,10 @@ static void __init do_init_bootmem(void)
 	int i;
 
 	/* Add active regions with valid PFNs. */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		__add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -276,7 +276,7 @@ static void __init early_reserve_mem(void)
 	 * this catches the (definitely buggy) case of us accidentally
 	 * initializing the bootmem allocator with an invalid RAM area.
 	 */
-	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+	memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
 		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
 		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
 
@@ -284,7 +284,7 @@ static void __init early_reserve_mem(void)
 	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
 	 */
 	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+		memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
 
 	/*
 	 * Handle additional early reservations
@@ -299,27 +299,27 @@ void __init paging_init(void)
 	unsigned long vaddr, end;
 	int nid;
 
-	lmb_init();
+	memblock_init();
 
 	sh_mv.mv_mem_init();
 
 	early_reserve_mem();
 
-	lmb_enforce_memory_limit(memory_limit);
-	lmb_analyze();
+	memblock_enforce_memory_limit(memory_limit);
+	memblock_analyze();
 
-	lmb_dump_all();
+	memblock_dump_all();
 
 	/*
 	 * Determine low and high memory ranges:
 	 */
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
 
 	nodes_clear(node_online_map);
 
 	memory_start = (unsigned long)__va(__MEMORY_START);
-	memory_end = memory_start + (memory_limit ?: lmb_phys_mem_size());
+	memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
 
 	uncached_init();
 	pmb_init();
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index a2e645f64a3..3d85225b9e9 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,7 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
 #include <linux/pfn.h>
@@ -39,12 +39,12 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
 			 PAGE_KERNEL);
 
-	lmb_add(start, end - start);
+	memblock_add(start, end - start);
 
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+	NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
 					     SMP_CACHE_BYTES, end));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
@@ -54,7 +54,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 
 	/* Node-local bootmap */
 	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+	bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
 				       PAGE_SIZE, end);
 	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
 			  start_pfn, end_pfn);
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 18623ba751b..6379091a164 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -770,7 +770,7 @@ static void __init pmb_resize(void)
 		spin_unlock_irqrestore(&pmbe->lock, flags);
 	}
 
-	read_lock(&pmb_rwlock);
+	read_unlock(&pmb_rwlock);
 }
 #endif
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 6f1470baa31..c0015db247b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -42,7 +42,7 @@ config SPARC64
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index bbf91b9c3d3..e7f2940bd27 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -325,7 +325,7 @@ main1:
 		(*rr)->next = NULL;
 	}
 	printf("! Generated by btfixupprep. Do not edit.\n\n");
-	printf("\t.section\t\".data.init\",#alloc,#write\n\t.align\t4\n\n");
+	printf("\t.section\t\".data..init\",#alloc,#write\n\t.align\t4\n\n");
 	printf("\t.global\t___btfixup_start\n___btfixup_start:\n\n");
 	for (i = 0; i < last; i++) {
 		f = array + i;
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 259e3fd5099..1dc07a0014c 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr  3 15:49:56 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -107,10 +107,9 @@ CONFIG_PERF_COUNTERS=y
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
@@ -239,6 +238,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
 CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -351,6 +351,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
@@ -367,6 +368,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
@@ -386,9 +388,14 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
+
+#
+# Some wireless drivers require a rate control algorithm
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 
 #
 # Device Drivers
@@ -658,6 +665,7 @@ CONFIG_PHYLIB=m
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
@@ -734,6 +742,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGBEVF is not set
@@ -766,6 +776,7 @@ CONFIG_NIU=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -778,7 +789,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
@@ -816,6 +826,7 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
@@ -840,6 +851,7 @@ CONFIG_MOUSE_SERIAL=y
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -848,6 +860,7 @@ CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -871,6 +884,7 @@ CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
 # CONFIG_NOZOMI is not set
 
 #
@@ -893,6 +907,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1306,11 +1322,14 @@ CONFIG_USB_HIDDEV=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
 CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
@@ -1328,7 +1347,9 @@ CONFIG_HID_ORTEK=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
 # CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 # CONFIG_HID_STANTUM is not set
@@ -1342,6 +1363,7 @@ CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1356,7 +1378,6 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -1521,10 +1542,6 @@ CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -1706,8 +1723,8 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1742,6 +1759,9 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1769,12 +1789,12 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
@@ -1895,6 +1915,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 78b07009f60..69358b590c9 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -11,7 +11,6 @@
 
 #define L1_CACHE_SHIFT 5
 #define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
 
 #ifdef CONFIG_SPARC32
 #define SMP_CACHE_BYTES_SHIFT 5
@@ -21,7 +20,7 @@
 
 #define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #ifdef CONFIG_SPARC32
 #include <asm/asi.h>
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
deleted file mode 100644
index 6a352cbcf52..00000000000
--- a/arch/sparc/include/asm/lmb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
new file mode 100644
index 00000000000..f12af880649
--- /dev/null
+++ b/arch/sparc/include/asm/memblock.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_MEMBLOCK_H
+#define _SPARC64_MEMBLOCK_H
+
+#include <asm/oplib.h>
+
+#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 77f906d8cc2..0ece77f4775 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@ BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
 #define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
 #define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
 
-BTFIXUPDEF_SETHI(none_mask)
 BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
 BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
 
 static inline int pte_none(pte_t pte)
 {
-	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+	return !pte_val(pte);
 }
 
 #define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@ BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
 
 static inline int pmd_none(pmd_t pmd)
 {
-	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+	return !pmd_val(pmd);
 }
 
 #define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index cdc91d919e9..83e85c2e802 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -4,7 +4,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/list.h>
 #include <linux/slab.h>
@@ -86,7 +86,7 @@ static void mdesc_handle_init(struct mdesc_handle *hp,
 	hp->handle_size = handle_size;
 }
 
-static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
+static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size)
 {
 	unsigned int handle_size, alloc_size;
 	struct mdesc_handle *hp;
@@ -97,7 +97,7 @@ static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
 		       mdesc_size);
 	alloc_size = PAGE_ALIGN(handle_size);
 
-	paddr = lmb_alloc(alloc_size, PAGE_SIZE);
+	paddr = memblock_alloc(alloc_size, PAGE_SIZE);
 
 	hp = NULL;
 	if (paddr) {
@@ -107,7 +107,7 @@ static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
 	return hp;
 }
 
-static void mdesc_lmb_free(struct mdesc_handle *hp)
+static void mdesc_memblock_free(struct mdesc_handle *hp)
 {
 	unsigned int alloc_size;
 	unsigned long start;
@@ -120,9 +120,9 @@ static void mdesc_lmb_free(struct mdesc_handle *hp)
 	free_bootmem_late(start, alloc_size);
 }
 
-static struct mdesc_mem_ops lmb_mdesc_ops = {
-	.alloc = mdesc_lmb_alloc,
-	.free  = mdesc_lmb_free,
+static struct mdesc_mem_ops memblock_mdesc_ops = {
+	.alloc = mdesc_memblock_alloc,
+	.free  = mdesc_memblock_free,
 };
 
 static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size)
@@ -914,7 +914,7 @@ void __init sun4v_mdesc_init(void)
 
 	printk("MDESC: Size is %lu bytes.\n", len);
 
-	hp = mdesc_alloc(len, &lmb_mdesc_ops);
+	hp = mdesc_alloc(len, &memblock_mdesc_ops);
 	if (hp == NULL) {
 		prom_printf("MDESC: alloc of %lu bytes failed.\n", len);
 		prom_halt();
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 0ec92c8861d..44faabc3c02 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -657,6 +657,7 @@ static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
 		cpuc->current_idx[i] = idx;
 
 		enc = perf_event_get_enc(cpuc->events[i]);
+		pcr &= ~mask_for_index(idx);
 		pcr |= event_encoding(enc, idx);
 	}
 out:
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index fb06ac2bd38..466a32763ea 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -20,7 +20,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_device.h>
 
 #include <asm/prom.h>
@@ -34,7 +34,7 @@
 
 void * __init prom_early_alloc(unsigned long size)
 {
-	unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES);
+	unsigned long paddr = memblock_alloc(size, SMP_CACHE_BYTES);
 	void *ret;
 
 	if (!paddr) {
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a72de5..e11b4612dab 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@ void sun4d_free_irq(unsigned int irq, void *dev_id)
 		goto out_unlock;
 	}
 	
-	if (action && tmp)
+	if (tmp)
 		tmp->next = action->next;
 	else
 		*actionp = action->next;
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837fc47d..c6dfdaa29e2 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@ tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
 tl0_irq6:	BTRAP(0x46)
 #endif
 tl0_irq7:	TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
 tl0_irq8:	TRAP_IRQ(smp_kgdb_capture_client, 8)
 #else
 tl0_irq8:	BTRAP(0x48)
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index b2831dc3c12..f0434513df1 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -23,7 +23,7 @@
 #include <linux/cache.h>
 #include <linux/sort.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mmzone.h>
 #include <linux/gfp.h>
 
@@ -726,7 +726,7 @@ static void __init find_ramdisk(unsigned long phys_base)
 		initrd_start = ramdisk_image;
 		initrd_end = ramdisk_image + sparc_ramdisk_size;
 
-		lmb_reserve(initrd_start, sparc_ramdisk_size);
+		memblock_reserve(initrd_start, sparc_ramdisk_size);
 
 		initrd_start += PAGE_OFFSET;
 		initrd_end += PAGE_OFFSET;
@@ -822,7 +822,7 @@ static void __init allocate_node_data(int nid)
 	struct pglist_data *p;
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	paddr = lmb_alloc_nid(sizeof(struct pglist_data),
+	paddr = memblock_alloc_nid(sizeof(struct pglist_data),
 			      SMP_CACHE_BYTES, nid, nid_range);
 	if (!paddr) {
 		prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid);
@@ -843,7 +843,7 @@ static void __init allocate_node_data(int nid)
 	if (p->node_spanned_pages) {
 		num_pages = bootmem_bootmap_pages(p->node_spanned_pages);
 
-		paddr = lmb_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
+		paddr = memblock_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
 				      nid_range);
 		if (!paddr) {
 			prom_printf("Cannot allocate bootmap for nid[%d]\n",
@@ -974,11 +974,11 @@ static void __init add_node_ranges(void)
 {
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start, end;
 
-		start = lmb.memory.region[i].base;
+		start = memblock.memory.region[i].base;
 		end = start + size;
 		while (start < end) {
 			unsigned long this_end;
@@ -1010,7 +1010,7 @@ static int __init grab_mlgroups(struct mdesc_handle *md)
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mlgroup),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mlgroup),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1051,7 +1051,7 @@ static int __init grab_mblocks(struct mdesc_handle *md)
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mblock),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mblock),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1279,8 +1279,8 @@ static int bootmem_init_numa(void)
 
 static void __init bootmem_init_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned int i;
 
 	numadbg("bootmem_init_nonnuma()\n");
@@ -1292,15 +1292,15 @@ static void __init bootmem_init_nonnuma(void)
 
 	init_node_masks_nonnuma();
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start_pfn, end_pfn;
 
 		if (!size)
 			continue;
 
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -1338,9 +1338,9 @@ static void __init trim_reserved_in_node(int nid)
 
 	numadbg("  trim_reserved_in_node(%d)\n", nid);
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long start = lmb.reserved.region[i].base;
-		unsigned long size = lmb_size_bytes(&lmb.reserved, i);
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long start = memblock.reserved.region[i].base;
+		unsigned long size = memblock_size_bytes(&memblock.reserved, i);
 		unsigned long end = start + size;
 
 		reserve_range_in_node(nid, start, end);
@@ -1384,7 +1384,7 @@ static unsigned long __init bootmem_init(unsigned long phys_base)
 	unsigned long end_pfn;
 	int nid;
 
-	end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	end_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn = end_pfn;
 	min_low_pfn = (phys_base >> PAGE_SHIFT);
 
@@ -1734,7 +1734,7 @@ void __init paging_init(void)
 		sun4v_ktsb_init();
 	}
 
-	lmb_init();
+	memblock_init();
 
 	/* Find available physical memory...
 	 *
@@ -1752,17 +1752,17 @@ void __init paging_init(void)
 	phys_base = 0xffffffffffffffffUL;
 	for (i = 0; i < pavail_ents; i++) {
 		phys_base = min(phys_base, pavail[i].phys_addr);
-		lmb_add(pavail[i].phys_addr, pavail[i].reg_size);
+		memblock_add(pavail[i].phys_addr, pavail[i].reg_size);
 	}
 
-	lmb_reserve(kern_base, kern_size);
+	memblock_reserve(kern_base, kern_size);
 
 	find_ramdisk(phys_base);
 
-	lmb_enforce_memory_limit(cmdline_memory_size);
+	memblock_enforce_memory_limit(cmdline_memory_size);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
 	set_bit(0, mmu_context_bmap);
 
@@ -1816,8 +1816,8 @@ void __init paging_init(void)
 	 */
 	for_each_possible_cpu(i) {
 		/* XXX Use node local allocations... XXX */
-		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
-		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		softirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 
 	/* Setup bootmem... */
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f5f75a58e0b..b0b43aa5e45 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2215,8 +2215,6 @@ void __init ld_mmu_srmmu(void)
 	BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
 
-	BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
 	BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index cf38846753d..4289f90f869 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2087,9 +2087,6 @@ void __init ld_mmu_sun4c(void)
 
 	BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
 
-	/* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
-	/* BTFIXUPSET_SETHI(none_mask, 0x00000000); */	/* Defaults to zero? */
-
 	BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
 #if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
 	BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/um/include/asm/arch_hweight.h
new file mode 100644
index 00000000000..c656cf443f4
--- /dev/null
+++ b/arch/um/include/asm/arch_hweight.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_HWEIGHT_H
+#define _ASM_UM_HWEIGHT_H
+
+#include <asm-generic/bitops/arch_hweight.h>
+
+#endif
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 7fcad58e216..69268014dd8 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -94,7 +94,7 @@ SECTIONS
   .data           : {
     INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
-    *(.data.init_irqstack)
+    *(.data..init_irqstack)
     DATA_DATA
     *(.data.* .gnu.linkonce.d.*)
     SORT(CONSTRUCTORS)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index 8aa77b61a5f..ddc9698b66e 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -34,5 +34,5 @@ union thread_union init_thread_union __init_task_data =
 	{ INIT_THREAD_INFO(init_task) };
 
 union thread_union cpu0_irqstack
-	__attribute__((__section__(".data.init_irqstack"))) =
+	__attribute__((__section__(".data..init_irqstack"))) =
 		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index e22c96993db..696634214dc 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -81,7 +81,7 @@ static int do_op_one_page(unsigned long addr, int len, int is_write,
 
 	current->thread.fault_catcher = NULL;
 
-	kunmap_atomic(page, KM_UML_USERCOPY);
+	kunmap_atomic((void *)addr, KM_UML_USERCOPY);
 
 	return n;
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index e7a6cca667a..ec637855067 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -50,7 +50,7 @@ SECTIONS
   {
     INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
-    *(.data.init_irqstack)
+    *(.data..init_irqstack)
     DATA_DATA
     *(.gnu.linkonce.d*)
     CONSTRUCTORS
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 93a11d7edfa..e696144d2be 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -10,6 +10,7 @@
 #include <errno.h>
 #include <fcntl.h>
 #include <string.h>
+#include <sys/stat.h>
 #include <sys/mman.h>
 #include <sys/param.h>
 #include "init.h"
diff --git a/arch/x86/.gitignore b/arch/x86/.gitignore
new file mode 100644
index 00000000000..028079065af
--- /dev/null
+++ b/arch/x86/.gitignore
@@ -0,0 +1,3 @@
+boot/compressed/vmlinux
+tools/test_get_len
+
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
index bcbd36c4143..5c228129d17 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -77,7 +77,7 @@ int main(int argc, char *argv[])
 	offs += 32*1024 + 18;	/* Add 32K + 18 bytes slack */
 	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
 
-	printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+	printf(".section \".rodata..compressed\",\"a\",@progbits\n");
 	printf(".globl z_input_len\n");
 	printf("z_input_len = %lu\n", ilen);
 	printf(".globl z_output_len\n");
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index a6f1a59a5b0..5ddabceee12 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -26,8 +26,8 @@ SECTIONS
 		HEAD_TEXT
 		_ehead = . ;
 	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
+	.rodata..compressed : {
+		*(.rodata..compressed)
 	}
 	.text :	{
 		_text = .; 	/* Text */
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index ed7aeff786b..45bc9402aa4 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -41,13 +41,12 @@ static __videocard video_vga;
 static u8 vga_set_basic_mode(void)
 {
 	struct biosregs ireg, oreg;
-	u16 ax;
 	u8 mode;
 
 	initregs(&ireg);
 
 	/* Query current mode */
-	ax = 0x0f00;
+	ireg.ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
 
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 2f9047cfaac..48f99f15452 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -7,7 +7,7 @@
 #define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #define INTERNODE_CACHE_SHIFT CONFIG_X86_INTERNODE_CACHE_SHIFT
 #define INTERNODE_CACHE_BYTES (1 << INTERNODE_CACHE_SHIFT)
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index c991b3a7b90..815c5b2b9f5 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -482,6 +482,8 @@ static inline void fpu_copy(struct fpu *dst, struct fpu *src)
 	memcpy(dst->state, src->state, xstate_size);
 }
 
+extern void fpu_finit(struct fpu *fpu);
+
 #endif /* __ASSEMBLY__ */
 
 #define PSHUFB_XMM5_XMM0 .byte 0x66, 0x0f, 0x38, 0x00, 0xc5
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 4470c9ad4a3..29f66793cc5 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -1,6 +1,12 @@
 #ifndef _ASM_X86_INTEL_SCU_IPC_H_
 #define  _ASM_X86_INTEL_SCU_IPC_H_
 
+#define IPCMSG_VRTC	0xFA	 /* Set vRTC device */
+
+/* Command id associated with message IPCMSG_VRTC */
+#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
+#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
+
 /* Read single register */
 int intel_scu_ipc_ioread8(u16 addr, u8 *data);
 
@@ -28,20 +34,6 @@ int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
 /* Update single register based on the mask */
 int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
 
-/*
- * Indirect register read
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- */
-int intel_scu_ipc_register_read(u32 addr, u32 *data);
-
-/*
- * Indirect register write
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- */
-int intel_scu_ipc_register_write(u32 addr, u32 data);
-
 /* Issue commands to the SCU with or without data */
 int intel_scu_ipc_simple_command(int cmd, int sub);
 int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 63cb4096c3d..9cb2edb87c2 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,7 +183,7 @@ struct mp_ioapic_gsi{
 	u32 gsi_end;
 };
 extern struct mp_ioapic_gsi  mp_gsi_routing[];
-extern u32 gsi_end;
+extern u32 gsi_top;
 int mp_find_ioapic(u32 gsi);
 int mp_find_ioapic_pin(int ioapic, u32 gsi);
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
@@ -197,7 +197,7 @@ static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
 static inline void probe_nr_irqs_gsi(void)	{ }
-#define gsi_end (NR_IRQS_LEGACY - 1)
+#define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
 
 struct io_apic_irq_attr;
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index ff90055c7f0..4d8dcbdfc12 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -22,6 +22,8 @@
 #define __KVM_HAVE_XEN_HVM
 #define __KVM_HAVE_VCPU_EVENTS
 #define __KVM_HAVE_DEBUGREGS
+#define __KVM_HAVE_XSAVE
+#define __KVM_HAVE_XCRS
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -299,4 +301,24 @@ struct kvm_debugregs {
 	__u64 reserved[9];
 };
 
+/* for KVM_CAP_XSAVE */
+struct kvm_xsave {
+	__u32 region[1024];
+};
+
+#define KVM_MAX_XCRS	16
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 0b2729bf207..51cfd730ac5 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -51,8 +51,10 @@ struct x86_emulate_ctxt;
 #define X86EMUL_UNHANDLEABLE    1
 /* Terminate emulation but return success to the caller. */
 #define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
-#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
-#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
+#define X86EMUL_RETRY_INSTR     3 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED  4 /* cmpxchg did not see expected value */
+#define X86EMUL_IO_NEEDED       5 /* IO is needed to complete emulation */
+
 struct x86_emulate_ops {
 	/*
 	 * read_std: Read bytes of standard (non-emulated/special) memory.
@@ -92,6 +94,7 @@ struct x86_emulate_ops {
 	int (*read_emulated)(unsigned long addr,
 			     void *val,
 			     unsigned int bytes,
+			     unsigned int *error,
 			     struct kvm_vcpu *vcpu);
 
 	/*
@@ -104,6 +107,7 @@ struct x86_emulate_ops {
 	int (*write_emulated)(unsigned long addr,
 			      const void *val,
 			      unsigned int bytes,
+			      unsigned int *error,
 			      struct kvm_vcpu *vcpu);
 
 	/*
@@ -118,6 +122,7 @@ struct x86_emulate_ops {
 				const void *old,
 				const void *new,
 				unsigned int bytes,
+				unsigned int *error,
 				struct kvm_vcpu *vcpu);
 
 	int (*pio_in_emulated)(int size, unsigned short port, void *val,
@@ -132,18 +137,26 @@ struct x86_emulate_ops {
 				      int seg, struct kvm_vcpu *vcpu);
 	u16 (*get_segment_selector)(int seg, struct kvm_vcpu *vcpu);
 	void (*set_segment_selector)(u16 sel, int seg, struct kvm_vcpu *vcpu);
+	unsigned long (*get_cached_segment_base)(int seg, struct kvm_vcpu *vcpu);
 	void (*get_gdt)(struct desc_ptr *dt, struct kvm_vcpu *vcpu);
 	ulong (*get_cr)(int cr, struct kvm_vcpu *vcpu);
-	void (*set_cr)(int cr, ulong val, struct kvm_vcpu *vcpu);
+	int (*set_cr)(int cr, ulong val, struct kvm_vcpu *vcpu);
 	int (*cpl)(struct kvm_vcpu *vcpu);
-	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+	int (*get_dr)(int dr, unsigned long *dest, struct kvm_vcpu *vcpu);
+	int (*set_dr)(int dr, unsigned long value, struct kvm_vcpu *vcpu);
+	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
 };
 
 /* Type, address-of, and value of an instruction's operand. */
 struct operand {
 	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
 	unsigned int bytes;
-	unsigned long val, orig_val, *ptr;
+	unsigned long orig_val, *ptr;
+	union {
+		unsigned long val;
+		char valptr[sizeof(unsigned long) + 2];
+	};
 };
 
 struct fetch_cache {
@@ -186,6 +199,7 @@ struct decode_cache {
 	unsigned long modrm_val;
 	struct fetch_cache fetch;
 	struct read_cache io_read;
+	struct read_cache mem_read;
 };
 
 struct x86_emulate_ctxt {
@@ -202,6 +216,12 @@ struct x86_emulate_ctxt {
 	int interruptibility;
 
 	bool restart; /* restart string instruction after writeback */
+
+	int exception; /* exception that happens during emulation or -1 */
+	u32 error_code; /* error code for exception */
+	bool error_code_valid;
+	unsigned long cr2; /* faulted address in case of #PF */
+
 	/* decode cache */
 	struct decode_cache decode;
 };
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 76f5483cffe..502e53f999c 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/mmu_notifier.h>
 #include <linux/tracepoint.h>
+#include <linux/cpumask.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -39,11 +40,14 @@
 				  0xFFFFFF0000000000ULL)
 
 #define INVALID_PAGE (~(hpa_t)0)
+#define VALID_PAGE(x) ((x) != INVALID_PAGE)
+
 #define UNMAPPED_GVA (~(gpa_t)0)
 
 /* KVM Hugepage definitions for x86 */
 #define KVM_NR_PAGE_SIZES	3
-#define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + (((x) - 1) * 9))
+#define KVM_HPAGE_GFN_SHIFT(x)	(((x) - 1) * 9)
+#define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + KVM_HPAGE_GFN_SHIFT(x))
 #define KVM_HPAGE_SIZE(x)	(1UL << KVM_HPAGE_SHIFT(x))
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
@@ -69,8 +73,6 @@
 
 #define IOPL_SHIFT 12
 
-#define KVM_ALIAS_SLOTS 4
-
 #define KVM_PERMILLE_MMU_PAGES 20
 #define KVM_MIN_ALLOC_MMU_PAGES 64
 #define KVM_MMU_HASH_SHIFT 10
@@ -241,7 +243,7 @@ struct kvm_mmu {
 	void (*prefetch_page)(struct kvm_vcpu *vcpu,
 			      struct kvm_mmu_page *page);
 	int (*sync_page)(struct kvm_vcpu *vcpu,
-			 struct kvm_mmu_page *sp);
+			 struct kvm_mmu_page *sp, bool clear_unsync);
 	void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva);
 	hpa_t root_hpa;
 	int root_level;
@@ -301,8 +303,8 @@ struct kvm_vcpu_arch {
 		unsigned long mmu_seq;
 	} update_pte;
 
-	struct i387_fxsave_struct host_fx_image;
-	struct i387_fxsave_struct guest_fx_image;
+	struct fpu guest_fpu;
+	u64 xcr0;
 
 	gva_t mmio_fault_cr2;
 	struct kvm_pio_request pio;
@@ -360,26 +362,11 @@ struct kvm_vcpu_arch {
 
 	/* fields used by HYPER-V emulation */
 	u64 hv_vapic;
-};
-
-struct kvm_mem_alias {
-	gfn_t base_gfn;
-	unsigned long npages;
-	gfn_t target_gfn;
-#define KVM_ALIAS_INVALID     1UL
-	unsigned long flags;
-};
 
-#define KVM_ARCH_HAS_UNALIAS_INSTANTIATION
-
-struct kvm_mem_aliases {
-	struct kvm_mem_alias aliases[KVM_ALIAS_SLOTS];
-	int naliases;
+	cpumask_var_t wbinvd_dirty_mask;
 };
 
 struct kvm_arch {
-	struct kvm_mem_aliases *aliases;
-
 	unsigned int n_free_mmu_pages;
 	unsigned int n_requested_mmu_pages;
 	unsigned int n_alloc_mmu_pages;
@@ -533,6 +520,8 @@ struct kvm_x86_ops {
 
 	void (*set_supported_cpuid)(u32 func, struct kvm_cpuid_entry2 *entry);
 
+	bool (*has_wbinvd_exit)(void);
+
 	const struct trace_print_flags *exit_reasons_str;
 };
 
@@ -576,7 +565,6 @@ enum emulation_result {
 #define EMULTYPE_SKIP		    (1 << 2)
 int emulate_instruction(struct kvm_vcpu *vcpu,
 			unsigned long cr2, u16 error_code, int emulation_type);
-void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
 void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
 
@@ -591,10 +579,7 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
 int kvm_emulate_halt(struct kvm_vcpu *vcpu);
 int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
 int emulate_clts(struct kvm_vcpu *vcpu);
-int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr,
-		    unsigned long *dest);
-int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
-		    unsigned long value);
+int kvm_emulate_wbinvd(struct kvm_vcpu *vcpu);
 
 void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, int seg);
@@ -602,15 +587,16 @@ int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, int seg);
 int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
 		    bool has_error_code, u32 error_code);
 
-void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
-void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
-void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+int kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
+int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
+int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8);
 int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val);
 int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val);
 unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
 void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
+int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr);
 
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
@@ -630,12 +616,7 @@ int kvm_pic_set_irq(void *opaque, int irq, int level);
 
 void kvm_inject_nmi(struct kvm_vcpu *vcpu);
 
-void fx_init(struct kvm_vcpu *vcpu);
-
-int emulator_write_emulated(unsigned long addr,
-			    const void *val,
-			    unsigned int bytes,
-			    struct kvm_vcpu *vcpu);
+int fx_init(struct kvm_vcpu *vcpu);
 
 void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu);
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
@@ -664,8 +645,6 @@ void kvm_disable_tdp(void);
 int complete_pio(struct kvm_vcpu *vcpu);
 bool kvm_check_iopl(struct kvm_vcpu *vcpu);
 
-struct kvm_memory_slot *gfn_to_memslot_unaliased(struct kvm *kvm, gfn_t gfn);
-
 static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
 {
 	struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
@@ -719,21 +698,6 @@ static inline unsigned long read_msr(unsigned long msr)
 }
 #endif
 
-static inline void kvm_fx_save(struct i387_fxsave_struct *image)
-{
-	asm("fxsave (%0)":: "r" (image));
-}
-
-static inline void kvm_fx_restore(struct i387_fxsave_struct *image)
-{
-	asm("fxrstor (%0)":: "r" (image));
-}
-
-static inline void kvm_fx_finit(void)
-{
-	asm("finit");
-}
-
 static inline u32 get_rdx_init_val(void)
 {
 	return 0x600; /* P6 family */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index b49d8ca228f..509a42187dc 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -20,6 +20,7 @@
 #define _EFER_LMA		10 /* Long mode active (read-only) */
 #define _EFER_NX		11 /* No execute enable */
 #define _EFER_SVME		12 /* Enable virtualization */
+#define _EFER_LMSLE		13 /* Long Mode Segment Limit Enable */
 #define _EFER_FFXSR		14 /* Enable Fast FXSAVE/FXRSTOR */
 
 #define EFER_SCE		(1<<_EFER_SCE)
@@ -27,6 +28,7 @@
 #define EFER_LMA		(1<<_EFER_LMA)
 #define EFER_NX			(1<<_EFER_NX)
 #define EFER_SVME		(1<<_EFER_SVME)
+#define EFER_LMSLE		(1<<_EFER_LMSLE)
 #define EFER_FFXSR		(1<<_EFER_FFXSR)
 
 /* Intel MSRs. Some also available on other CPUs */
@@ -110,6 +112,7 @@
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
 #define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
 #define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_IBSFETCHCTL		0xc0011030
 #define MSR_AMD64_IBSFETCHLINAD		0xc0011031
 #define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 8d8797eae5d..cd2a31dc5fb 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -53,6 +53,8 @@ extern int pcibios_last_bus;
 extern struct pci_bus *pci_root_bus;
 extern struct pci_ops pci_root_ops;
 
+void pcibios_scan_specific_bus(int busn);
+
 /* pci-irq.c */
 
 struct irq_info {
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0797e748d28..cd28f9ad910 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -77,6 +77,7 @@ do {							\
 	if (0) {					\
 		pto_T__ pto_tmp__;			\
 		pto_tmp__ = (val);			\
+		(void)pto_tmp__;			\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
@@ -115,6 +116,7 @@ do {									\
 	if (0) {							\
 		pao_T__ pao_tmp__;					\
 		pao_tmp__ = (val);					\
+		(void)pao_tmp__;					\
 	}								\
 	switch (sizeof(var)) {						\
 	case 1:								\
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 5e67c153231..ed5903be26f 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -26,7 +26,7 @@
  */
 #define VMALLOC_OFFSET	(8 * 1024 * 1024)
 
-#ifndef __ASSEMBLER__
+#ifndef __ASSEMBLY__
 extern bool __vmalloc_start_set; /* set once high_memory is set */
 #endif
 
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index 48dcfa62ea0..fd921c3a684 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -15,6 +15,8 @@ static inline int arch_prepare_suspend(void) { return 0; }
 struct saved_context {
 	u16 es, fs, gs, ss;
 	unsigned long cr0, cr2, cr3, cr4;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	struct desc_ptr gdt;
 	struct desc_ptr idt;
 	u16 ldt;
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index 06284f42b75..8d942afae68 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -27,6 +27,8 @@ struct saved_context {
 	u16 ds, es, fs, gs, ss;
 	unsigned long gs_base, gs_kernel_base, fs_base;
 	unsigned long cr0, cr2, cr3, cr4, cr8;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	unsigned long efer;
 	u16 gdt_pad;
 	u16 gdt_limit;
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 1db9bd2281d..33ecc3ea878 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -451,7 +451,7 @@ void stop_this_cpu(void *dummy);
  *
  * (Could use an alternative three way for this if there was one.)
  */
-static inline void rdtsc_barrier(void)
+static __always_inline void rdtsc_barrier(void)
 {
 	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
 	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 9e6779f7cf2..9f0cbd987d5 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -257,6 +257,7 @@ enum vmcs_field {
 #define EXIT_REASON_IO_INSTRUCTION      30
 #define EXIT_REASON_MSR_READ            31
 #define EXIT_REASON_MSR_WRITE           32
+#define EXIT_REASON_INVALID_STATE	33
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
 #define EXIT_REASON_MONITOR_INSTRUCTION 39
 #define EXIT_REASON_PAUSE_INSTRUCTION   40
@@ -266,6 +267,7 @@ enum vmcs_field {
 #define EXIT_REASON_EPT_VIOLATION       48
 #define EXIT_REASON_EPT_MISCONFIG       49
 #define EXIT_REASON_WBINVD		54
+#define EXIT_REASON_XSETBV		55
 
 /*
  * Interruption-information format
@@ -375,6 +377,9 @@ enum vmcs_field {
 #define VMX_EPT_EXTENT_CONTEXT_BIT		(1ull << 25)
 #define VMX_EPT_EXTENT_GLOBAL_BIT		(1ull << 26)
 
+#define VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT      (1ull << 9) /* (41 - 32) */
+#define VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT      (1ull << 10) /* (42 - 32) */
+
 #define VMX_EPT_DEFAULT_GAW			3
 #define VMX_EPT_MAX_GAW				0x4
 #define VMX_EPT_MT_EPTE_SHIFT			3
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 519b54327d7..baa579c8e03 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -142,6 +142,7 @@ struct x86_cpuinit_ops {
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
  * @nmi_init			enable NMI on cpus
+ * @i8042_detect		pre-detect if i8042 controller exists
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
@@ -150,6 +151,7 @@ struct x86_platform_ops {
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
 	void (*nmi_init)(void);
+	int (*i8042_detect)(void);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 2c4390cae22..32c36668fa7 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -13,6 +13,12 @@
 
 #define FXSAVE_SIZE	512
 
+#define XSAVE_HDR_SIZE	    64
+#define XSAVE_HDR_OFFSET    FXSAVE_SIZE
+
+#define XSAVE_YMM_SIZE	    256
+#define XSAVE_YMM_OFFSET    (XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET)
+
 /*
  * These are the features that the OS can handle currently.
  */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 60cc4058ed5..c05872aa3ce 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -118,7 +118,7 @@ static unsigned int gsi_to_irq(unsigned int gsi)
 	if (gsi >= NR_IRQS_LEGACY)
 		irq = gsi;
 	else
-		irq = gsi_end + 1 + gsi;
+		irq = gsi_top + gsi;
 
 	return irq;
 }
@@ -129,10 +129,10 @@ static u32 irq_to_gsi(int irq)
 
 	if (irq < NR_IRQS_LEGACY)
 		gsi = isa_irq_to_gsi[irq];
-	else if (irq <= gsi_end)
+	else if (irq < gsi_top)
 		gsi = irq;
-	else if (irq <= (gsi_end + NR_IRQS_LEGACY))
-		gsi = irq - gsi_end;
+	else if (irq < (gsi_top + NR_IRQS_LEGACY))
+		gsi = irq - gsi_top;
 	else
 		gsi = 0xffffffff;
 
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5080f..fb7a5f052e2 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 		percpu_entry->states[cx->index].eax = cx->address;
 		percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
 	}
+
+	/*
+	 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+	 * then we should skip checking BM_STS for this C-state.
+	 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+	 */
+	if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+		cx->bm_sts_skip = 1;
+
 	return retval;
 }
 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e508677b9..fcc3c61fdec 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,9 +157,14 @@ static int __init acpi_sleep_setup(char *str)
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
 			acpi_no_s4_hw_signature();
-		if (strncmp(str, "s4_nonvs", 8) == 0)
-			acpi_s4_no_nvs();
+		if (strncmp(str, "s4_nonvs", 8) == 0) {
+			pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+					"please use acpi_sleep=nonvs instead");
+			acpi_nvs_nosave();
+		}
 #endif
+		if (strncmp(str, "nonvs", 5) == 0)
+			acpi_nvs_nosave();
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 8ded418b059..13ab720573e 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -1,4 +1,4 @@
-	.section .text.page_aligned
+	.section .text..page_aligned
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index fa5a1474cd1..0d20286d78c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1487,6 +1487,7 @@ static int __attach_device(struct device *dev,
 			   struct protection_domain *domain)
 {
 	struct iommu_dev_data *dev_data, *alias_data;
+	int ret;
 
 	dev_data   = get_dev_data(dev);
 	alias_data = get_dev_data(dev_data->alias);
@@ -1498,13 +1499,14 @@ static int __attach_device(struct device *dev,
 	spin_lock(&domain->lock);
 
 	/* Some sanity checks */
+	ret = -EBUSY;
 	if (alias_data->domain != NULL &&
 	    alias_data->domain != domain)
-		return -EBUSY;
+		goto out_unlock;
 
 	if (dev_data->domain != NULL &&
 	    dev_data->domain != domain)
-		return -EBUSY;
+		goto out_unlock;
 
 	/* Do real assignment */
 	if (dev_data->alias != dev) {
@@ -1520,10 +1522,14 @@ static int __attach_device(struct device *dev,
 
 	atomic_inc(&dev_data->bind);
 
+	ret = 0;
+
+out_unlock:
+
 	/* ready */
 	spin_unlock(&domain->lock);
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -2324,10 +2330,6 @@ int __init amd_iommu_init_dma_ops(void)
 
 	iommu_detected = 1;
 	swiotlb = 0;
-#ifdef CONFIG_GART_IOMMU
-	gart_iommu_aperture_disabled = 1;
-	gart_iommu_aperture = 0;
-#endif
 
 	/* Make the driver finally visible to the drivers */
 	dma_ops = &amd_iommu_dma_ops;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 3bacb4d0844..3cc63e2b8dd 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -287,8 +287,12 @@ static u8 * __init iommu_map_mmio_space(u64 address)
 {
 	u8 *ret;
 
-	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
+	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu")) {
+		pr_err("AMD-Vi: Can not reserve memory region %llx for mmio\n",
+			address);
+		pr_err("AMD-Vi: This is a BIOS bug. Please contact your hardware vendor\n");
 		return NULL;
+	}
 
 	ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
 	if (ret != NULL)
@@ -1314,7 +1318,7 @@ static int __init amd_iommu_init(void)
 		ret = amd_iommu_init_dma_ops();
 
 	if (ret)
-		goto free;
+		goto free_disable;
 
 	amd_iommu_init_api();
 
@@ -1332,9 +1336,10 @@ static int __init amd_iommu_init(void)
 out:
 	return ret;
 
-free:
+free_disable:
 	disable_iommus();
 
+free:
 	amd_iommu_uninit_devices();
 
 	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
@@ -1353,6 +1358,15 @@ free:
 
 	free_unity_maps();
 
+#ifdef CONFIG_GART_IOMMU
+	/*
+	 * We failed to initialize the AMD IOMMU - try fallback to GART
+	 * if possible.
+	 */
+	gart_iommu_init();
+
+#endif
+
 	goto out;
 }
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc692985..a96489ee6ca 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -921,7 +921,7 @@ void disable_local_APIC(void)
 	unsigned int value;
 
 	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
+	if (!x2apic_mode && !apic_phys)
 		return;
 
 	clear_local_APIC();
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 33f3563a2a5..e41ed24ab26 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -89,8 +89,8 @@ int nr_ioapics;
 /* IO APIC gsi routing info */
 struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
 
-/* The last gsi number used */
-u32 gsi_end;
+/* The one past the highest gsi number used */
+u32 gsi_top;
 
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -1035,7 +1035,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 		if (gsi >= NR_IRQS_LEGACY)
 			irq = gsi;
 		else
-			irq = gsi_end + 1 + gsi;
+			irq = gsi_top + gsi;
 	}
 
 #ifdef CONFIG_X86_32
@@ -3853,7 +3853,7 @@ void __init probe_nr_irqs_gsi(void)
 {
 	int nr;
 
-	nr = gsi_end + 1 + NR_IRQS_LEGACY;
+	nr = gsi_top + NR_IRQS_LEGACY;
 	if (nr > nr_irqs_gsi)
 		nr_irqs_gsi = nr;
 
@@ -4294,8 +4294,8 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	 */
 	nr_ioapic_registers[idx] = entries;
 
-	if (mp_gsi_routing[idx].gsi_end > gsi_end)
-		gsi_end = mp_gsi_routing[idx].gsi_end;
+	if (mp_gsi_routing[idx].gsi_end >= gsi_top)
+		gsi_top = mp_gsi_routing[idx].gsi_end + 1;
 
 	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
 	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 1d3cddaa40e..246cd3afbb5 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -34,7 +34,6 @@
 #include <linux/compiler.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
-#include <trace/events/power.h>
 
 #include <linux/acpi.h>
 #include <linux/io.h>
@@ -324,8 +323,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	trace_power_frequency(POWER_PSTATE, data->freq_table[next_state].frequency);
-
 	switch (data->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
 		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
@@ -351,7 +348,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu(i, cmd.mask) {
+	for_each_cpu(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -367,7 +364,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu(i, cmd.mask) {
+	for_each_cpu(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index 16e3483be9e..32974cf8423 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -169,12 +169,9 @@ static int gx_freq_mult[16] = {
  *	Low Level chipset interface				*
  ****************************************************************/
 static struct pci_device_id gx_chipset_tbl[] __initdata = {
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510,
-		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
 	{ 0, },
 };
 
@@ -199,7 +196,7 @@ static __init struct pci_dev *gx_detect_chipset(void)
 	}
 
 	/* detect which companion chip is used */
-	while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
+	for_each_pci_dev(gx_pci) {
 		if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
 			return gx_pci;
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index 7e7eea4f826..03162dac627 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -426,7 +426,7 @@ static int guess_fsb(int mult)
 }
 
 
-static int __init longhaul_get_ranges(void)
+static int __cpuinit longhaul_get_ranges(void)
 {
 	unsigned int i, j, k = 0;
 	unsigned int ratio;
@@ -530,7 +530,7 @@ static int __init longhaul_get_ranges(void)
 }
 
 
-static void __init longhaul_setup_voltagescaling(void)
+static void __cpuinit longhaul_setup_voltagescaling(void)
 {
 	union msr_longhaul longhaul;
 	struct mV_pos minvid, maxvid, vid;
@@ -784,7 +784,7 @@ static int longhaul_setup_southbridge(void)
 	return 0;
 }
 
-static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
+static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	char *cpuname = NULL;
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h
index e2360a469f7..cbf48fbca88 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h
@@ -56,7 +56,7 @@ union msr_longhaul {
 /*
  * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
  */
-static const int __initdata samuel1_mults[16] = {
+static const int __cpuinitdata samuel1_mults[16] = {
 	-1, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -75,7 +75,7 @@ static const int __initdata samuel1_mults[16] = {
 	-1, /* 1111 -> RESERVED */
 };
 
-static const int __initdata samuel1_eblcr[16] = {
+static const int __cpuinitdata samuel1_eblcr[16] = {
 	50, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -97,7 +97,7 @@ static const int __initdata samuel1_eblcr[16] = {
 /*
  * VIA C3 Samuel2 Stepping 1->15
  */
-static const int __initdata samuel2_eblcr[16] = {
+static const int __cpuinitdata samuel2_eblcr[16] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = {
 /*
  * VIA C3 Ezra
  */
-static const int __initdata ezra_mults[16] = {
+static const int __cpuinitdata ezra_mults[16] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -138,7 +138,7 @@ static const int __initdata ezra_mults[16] = {
 	120, /* 1111 -> 12.0x */
 };
 
-static const int __initdata ezra_eblcr[16] = {
+static const int __cpuinitdata ezra_eblcr[16] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = {
 /*
  * VIA C3 (Ezra-T) [C5M].
  */
-static const int __initdata ezrat_mults[32] = {
+static const int __cpuinitdata ezrat_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -196,7 +196,7 @@ static const int __initdata ezrat_mults[32] = {
 	-1,  /* 1111 -> RESERVED (12.0x) */
 };
 
-static const int __initdata ezrat_eblcr[32] = {
+static const int __cpuinitdata ezrat_eblcr[32] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = {
 /*
  * VIA C3 Nehemiah */
 
-static const int __initdata  nehemiah_mults[32] = {
+static const int __cpuinitdata nehemiah_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	-1, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
@@ -270,7 +270,7 @@ static const int __initdata  nehemiah_mults[32] = {
 	-1, /* 1111 -> 12.0x */
 };
 
-static const int __initdata nehemiah_eblcr[32] = {
+static const int __cpuinitdata nehemiah_eblcr[32] = {
 	50,  /* 0000 ->  5.0x */
 	160, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
@@ -315,7 +315,7 @@ struct mV_pos {
 	unsigned short pos;
 };
 
-static const struct mV_pos __initdata vrm85_mV[32] = {
+static const struct mV_pos __cpuinitdata vrm85_mV[32] = {
 	{1250, 8},	{1200, 6},	{1150, 4},	{1100, 2},
 	{1050, 0},	{1800, 30},	{1750, 28},	{1700, 26},
 	{1650, 24},	{1600, 22},	{1550, 20},	{1500, 18},
@@ -326,14 +326,14 @@ static const struct mV_pos __initdata vrm85_mV[32] = {
 	{1475, 17},	{1425, 15},	{1375, 13},	{1325, 11}
 };
 
-static const unsigned char __initdata mV_vrm85[32] = {
+static const unsigned char __cpuinitdata mV_vrm85[32] = {
 	0x04,	0x14,	0x03,	0x13,	0x02,	0x12,	0x01,	0x11,
 	0x00,	0x10,	0x0f,	0x1f,	0x0e,	0x1e,	0x0d,	0x1d,
 	0x0c,	0x1c,	0x0b,	0x1b,	0x0a,	0x1a,	0x09,	0x19,
 	0x08,	0x18,	0x07,	0x17,	0x06,	0x16,	0x05,	0x15
 };
 
-static const struct mV_pos __initdata mobilevrm_mV[32] = {
+static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = {
 	{1750, 31},	{1700, 30},	{1650, 29},	{1600, 28},
 	{1550, 27},	{1500, 26},	{1450, 25},	{1400, 24},
 	{1350, 23},	{1300, 22},	{1250, 21},	{1200, 20},
@@ -344,7 +344,7 @@ static const struct mV_pos __initdata mobilevrm_mV[32] = {
 	{675, 3},	{650, 2},	{625, 1},	{600, 0}
 };
 
-static const unsigned char __initdata mV_mobilevrm[32] = {
+static const unsigned char __cpuinitdata mV_mobilevrm[32] = {
 	0x1f,	0x1e,	0x1d,	0x1c,	0x1b,	0x1a,	0x19,	0x18,
 	0x17,	0x16,	0x15,	0x14,	0x13,	0x12,	0x11,	0x10,
 	0x0f,	0x0e,	0x0d,	0x0c,	0x0b,	0x0a,	0x09,	0x08,
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index e7b559d74c5..fc09f142d94 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -165,8 +165,8 @@ static unsigned int longrun_get(unsigned int cpu)
  * TMTA rules:
  * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
  */
-static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
-						   unsigned int *high_freq)
+static unsigned int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
+						      unsigned int *high_freq)
 {
 	u32 msr_lo, msr_hi;
 	u32 save_lo, save_hi;
@@ -258,7 +258,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 }
 
 
-static int __init longrun_cpu_init(struct cpufreq_policy *policy)
+static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy)
 {
 	int result = 0;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 7b8a8ba67b0..bd1cac747f6 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -178,13 +178,8 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 		}
 	}
 
-	if (c->x86 != 0xF) {
-		if (!cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Unknown CPU. "
-				"Please send an e-mail to "
-				"<cpufreq@vger.kernel.org>\n");
+	if (c->x86 != 0xF)
 		return 0;
-	}
 
 	/* on P-4s, the TSC runs with constant frequency independent whether
 	 * throttling is active or not. */
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
index ce7cde713e7..a36de5bbb62 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -368,22 +368,16 @@ static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
 		return -ENODEV;
 
 	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (out_obj->type != ACPI_TYPE_BUFFER)
+		return -ENODEV;
 
 	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
-	if (errors) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (errors)
+		return -ENODEV;
 
 	supported = *((u32 *)(out_obj->buffer.pointer + 4));
-	if (!(supported & 0x1)) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (!(supported & 0x1))
+		return -ENODEV;
 
 out_free:
 	kfree(output.pointer);
@@ -397,13 +391,17 @@ static int __init pcc_cpufreq_probe(void)
 	struct pcc_memory_resource *mem_resource;
 	struct pcc_register_resource *reg_resource;
 	union acpi_object *out_obj, *member;
-	acpi_handle handle, osc_handle;
+	acpi_handle handle, osc_handle, pcch_handle;
 	int ret = 0;
 
 	status = acpi_get_handle(NULL, "\\_SB", &handle);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
 	status = acpi_get_handle(handle, "_OSC", &osc_handle);
 	if (ACPI_SUCCESS(status)) {
 		ret = pcc_cpufreq_do_osc(&osc_handle);
@@ -543,13 +541,13 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	if (!pcch_virt_addr) {
 		result = -1;
-		goto pcch_null;
+		goto out;
 	}
 
 	result = pcc_get_offset(cpu);
 	if (result) {
 		dprintk("init: PCCP evaluation failed\n");
-		goto free;
+		goto out;
 	}
 
 	policy->max = policy->cpuinfo.max_freq =
@@ -558,14 +556,15 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		ioread32(&pcch_hdr->minimum_frequency) * 1000;
 	policy->cur = pcc_get_freq(cpu);
 
+	if (!policy->cur) {
+		dprintk("init: Unable to get current CPU frequency\n");
+		result = -EINVAL;
+		goto out;
+	}
+
 	dprintk("init: policy->max is %d, policy->min is %d\n",
 		policy->max, policy->min);
-
-	return 0;
-free:
-	pcc_clear_mapping();
-	free_percpu(pcc_cpu_info);
-pcch_null:
+out:
 	return result;
 }
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 9a97116f89e..4a45fd6e41b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -569,7 +569,7 @@ static int powernow_verify(struct cpufreq_policy *policy)
  * We will then get the same kind of behaviour already tested under
  * the "well-known" other OS.
  */
-static int __init fixup_sgtc(void)
+static int __cpuinit fixup_sgtc(void)
 {
 	unsigned int sgtc;
 	unsigned int m;
@@ -603,7 +603,7 @@ static unsigned int powernow_get(unsigned int cpu)
 }
 
 
-static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
+static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d)
 {
 	printk(KERN_WARNING PFX
 		"%s laptop with broken PST tables in BIOS detected.\n",
@@ -621,7 +621,7 @@ static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
  * A BIOS update is all that can save them.
  * Mention this, and disable cpufreq.
  */
-static struct dmi_system_id __initdata powernow_dmi_table[] = {
+static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = {
 	{
 		.callback = acer_cpufreq_pst,
 		.ident = "Acer Aspire",
@@ -633,7 +633,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = {
 	{ }
 };
 
-static int __init powernow_cpu_init(struct cpufreq_policy *policy)
+static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy)
 {
 	union msr_fidvidstatus fidvidstatus;
 	int result;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 7ec2123838e..90cab2d4ac0 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -806,6 +806,8 @@ static int find_psb_table(struct powernow_k8_data *data)
 	 * www.amd.com
 	 */
 	printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
+	printk(KERN_ERR PFX "Make sure that your BIOS is up to date"
+		" and Cool'N'Quiet support is enabled in BIOS setup\n");
 	return -ENODEV;
 }
 
@@ -910,8 +912,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 {
 	int i;
 	u32 hi = 0, lo = 0;
-	rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
-	data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
+	rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi);
+	data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 index;
@@ -1023,13 +1025,12 @@ static int get_transition_latency(struct powernow_k8_data *data)
 	}
 	if (max_latency == 0) {
 		/*
-		 * Fam 11h always returns 0 as transition latency.
-		 * This is intended and means "very fast". While cpufreq core
-		 * and governors currently can handle that gracefully, better
-		 * set it to 1 to avoid problems in the future.
-		 * For all others it's a BIOS bug.
+		 * Fam 11h and later may return 0 as transition latency. This
+		 * is intended and means "very fast". While cpufreq core and
+		 * governors currently can handle that gracefully, better set it
+		 * to 1 to avoid problems in the future.
 		 */
-		if (boot_cpu_data.x86 != 0x11)
+		if (boot_cpu_data.x86 < 0x11)
 			printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
 				"latency\n");
 		max_latency = 1;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 707165dbc20..1970ef911c9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -36,6 +36,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
+#include <linux/edac_mce.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
@@ -169,6 +170,15 @@ void mce_log(struct mce *mce)
 		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
 			/*
+			 * If edac_mce is enabled, it will check the error type
+			 * and will process it, if it is a known error.
+			 * Otherwise, the error will be sent through mcelog
+			 * interface
+			 */
+			if (edac_mce_parse(mce))
+				return;
+
+			/*
 			 * When the buffer fills up discard new entries.
 			 * Assume that the earlier errors are the more
 			 * interesting ones:
@@ -590,6 +600,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		 */
 		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
 			mce_log(&m);
+			atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
 			add_taint(TAINT_MACHINE_CHECK);
 		}
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index c77586061bc..5db5b7d65a1 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -106,6 +106,7 @@ struct cpu_hw_events {
 
 	int			n_events;
 	int			n_added;
+	int			n_txn;
 	int			assign[X86_PMC_IDX_MAX]; /* event to counter assignment */
 	u64			tags[X86_PMC_IDX_MAX];
 	struct perf_event	*event_list[X86_PMC_IDX_MAX]; /* in enabled order */
@@ -983,6 +984,7 @@ static int x86_pmu_enable(struct perf_event *event)
 out:
 	cpuc->n_events = n;
 	cpuc->n_added += n - n0;
+	cpuc->n_txn += n - n0;
 
 	return 0;
 }
@@ -1089,6 +1091,14 @@ static void x86_pmu_disable(struct perf_event *event)
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	int i;
 
+	/*
+	 * If we're called during a txn, we don't need to do anything.
+	 * The events never got scheduled and ->cancel_txn will truncate
+	 * the event_list.
+	 */
+	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+		return;
+
 	x86_pmu_stop(event);
 
 	for (i = 0; i < cpuc->n_events; i++) {
@@ -1379,6 +1389,7 @@ static void x86_pmu_start_txn(const struct pmu *pmu)
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	cpuc->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuc->n_txn = 0;
 }
 
 /*
@@ -1391,6 +1402,11 @@ static void x86_pmu_cancel_txn(const struct pmu *pmu)
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	cpuc->group_flag &= ~PERF_EVENT_TXN_STARTED;
+	/*
+	 * Truncate the collected events.
+	 */
+	cpuc->n_added -= cpuc->n_txn;
+	cpuc->n_events -= cpuc->n_txn;
 }
 
 /*
@@ -1419,6 +1435,12 @@ static int x86_pmu_commit_txn(const struct pmu *pmu)
 	 */
 	memcpy(cpuc->assign, assign, n*sizeof(int));
 
+	/*
+	 * Clear out the txn count so that ->cancel_txn() which gets
+	 * run after ->commit_txn() doesn't undo things.
+	 */
+	cpuc->n_txn = 0;
+
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 611df11ba15..c2897b7b4a3 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -102,8 +102,8 @@ static const u64 amd_perfmon_event_map[] =
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
   [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
   [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c2,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c3,
 };
 
 static u64 amd_pmu_event_map(int hw_event)
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index fdbc652d3fe..214ac860ebe 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -72,6 +72,7 @@ static struct event_constraint intel_westmere_event_constraints[] =
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xb3, 0x1), /* SNOOPQ_REQUEST_OUTSTANDING */
 	EVENT_CONSTRAINT_END
 };
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7bca3c6a02f..0d6fc71bedb 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -729,7 +729,7 @@ static int __init e820_mark_nvs_memory(void)
 		struct e820entry *ei = &e820.map[i];
 
 		if (ei->type == E820_NVS)
-			hibernate_nvs_register(ei->addr, ei->size);
+			suspend_nvs_register(ei->addr, ei->size);
 	}
 
 	return 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85cf268..e5cc7e82e60 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
 #include <asm/apic.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/hpet.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -191,6 +192,21 @@ static void __init ati_bugs_contd(int num, int slot, int func)
 }
 #endif
 
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+	hpet_readback_cmp = 1;
+#endif
+}
+
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
 	{}
 };
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff13983..4db7c4d12ff 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@ auditsys:
 	 * masked off.
 	 */
 sysret_audit:
-	movq %rax,%rsi		/* second arg, syscall return value */
-	cmpq $0,%rax		/* is it < 0? */
+	movq RAX-ARGOFFSET(%rsp),%rsi	/* second arg, syscall return value */
+	cmpq $0,%rsi		/* is it < 0? */
 	setl %al		/* 1 if so, 0 if not */
 	movzbl %al,%edi		/* zero-extend that into %edi */
 	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a198b7c87a1..ba390d73117 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -964,7 +964,7 @@ fs_initcall(hpet_late_init);
 
 void hpet_disable(void)
 {
-	if (is_hpet_capable()) {
+	if (is_hpet_capable() && hpet_virt_address) {
 		unsigned int cfg = hpet_readl(HPET_CFG);
 
 		if (hpet_legacy_int_enabled) {
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 86cef6b3225..c4444bce846 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -107,7 +107,7 @@ void __cpuinit fpu_init(void)
 }
 #endif	/* CONFIG_X86_64 */
 
-static void fpu_finit(struct fpu *fpu)
+void fpu_finit(struct fpu *fpu)
 {
 #ifdef CONFIG_X86_32
 	if (!HAVE_HWFP) {
@@ -132,6 +132,7 @@ static void fpu_finit(struct fpu *fpu)
 		fp->fos = 0xffff0000u;
 	}
 }
+EXPORT_SYMBOL_GPL(fpu_finit);
 
 /*
  * The _current_ task is using the FPU for the first time
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 7c9f02c130f..cafa7c80ac9 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -276,16 +276,6 @@ static struct sys_device device_i8259A = {
 	.cls	= &i8259_sysdev_class,
 };
 
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
 static void mask_8259A(void)
 {
 	unsigned long flags;
@@ -407,3 +397,18 @@ struct legacy_pic default_legacy_pic = {
 };
 
 struct legacy_pic *legacy_pic = &default_legacy_pic;
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error;
+
+	if (legacy_pic != &default_legacy_pic)
+		return 0;
+
+	error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sysdev_register(&device_i8259A);
+	return error;
+}
+
+device_initcall(i8259A_init_sysfs);
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 3a54dcb9cd0..43e9ccf4494 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -34,7 +34,7 @@ EXPORT_SYMBOL(init_task);
 /*
  * per-CPU TSS segments. Threads are completely 'soft' on Linux,
  * no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data.cacheline_aligned
+ * so they are allowed to end up in the .data..cacheline_aligned
  * section. Since TSS's are completely CPU-local, we want them
  * on exact cacheline boundaries, to eliminate cacheline ping-pong.
  */
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 4f4af75b948..01ab17ae2ae 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -572,7 +572,6 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 	return NOTIFY_STOP;
 }
 
-#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 int kgdb_ll_trap(int cmd, const char *str,
 		 struct pt_regs *regs, long err, int trap, int sig)
 {
@@ -590,7 +589,6 @@ int kgdb_ll_trap(int cmd, const char *str,
 
 	return __kgdb_notify(&args, cmd);
 }
-#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
 static int
 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
@@ -625,6 +623,12 @@ int kgdb_arch_init(void)
 	return register_die_notifier(&kgdb_notifier);
 }
 
+static void kgdb_hw_overflow_handler(struct perf_event *event, int nmi,
+		struct perf_sample_data *data, struct pt_regs *regs)
+{
+	kgdb_ll_trap(DIE_DEBUG, "debug", regs, 0, 0, SIGTRAP);
+}
+
 void kgdb_arch_late(void)
 {
 	int i, cpu;
@@ -655,6 +659,7 @@ void kgdb_arch_late(void)
 		for_each_online_cpu(cpu) {
 			pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
 			pevent[0]->hw.sample_period = 1;
+			pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
 			if (pevent[0]->destroy != NULL) {
 				pevent[0]->destroy = NULL;
 				release_bp_slot(*pevent);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 345a4b1fe14..675879b65ce 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -640,8 +640,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	/* Skip cs, ip, orig_ax and gs. */	\
 	"	subl $16, %esp\n"	\
 	"	pushl %fs\n"		\
-	"	pushl %ds\n"		\
 	"	pushl %es\n"		\
+	"	pushl %ds\n"		\
 	"	pushl %eax\n"		\
 	"	pushl %ebp\n"		\
 	"	pushl %edi\n"		\
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5ae5d2426ed..d86dbf7e54b 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -123,7 +123,7 @@ static void __init MP_ioapic_info(struct mpc_ioapic *m)
 	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
 	       m->apicid, m->apicver, m->apicaddr);
 
-	mp_register_ioapic(m->apicid, m->apicaddr, gsi_end + 1);
+	mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
 }
 
 static void print_MP_intsrc_info(struct mpc_intsrc *m)
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index e796448f0eb..5915e0b3330 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -216,6 +216,12 @@ static void __init mrst_setup_boot_clock(void)
 		setup_boot_APIC_clock();
 };
 
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+	return 0;
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -233,6 +239,7 @@ void __init x86_mrst_early_setup(void)
 	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+	x86_platform.i8042_detect = mrst_i8042_detect;
 	x86_init.pci.init = pci_mrst_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index fb99f7edb34..078d4ec1a9d 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -103,11 +103,16 @@ int use_calgary __read_mostly = 0;
 #define PMR_SOFTSTOPFAULT	0x40000000
 #define PMR_HARDSTOP		0x20000000
 
-#define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS		8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM		(MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY	4
+/*
+ * The maximum PHB bus number.
+ * x3950M2 (rare): 8 chassis, 48 PHBs per chassis = 384
+ * x3950M2: 4 chassis, 48 PHBs per chassis        = 192
+ * x3950 (PCIE): 8 chassis, 32 PHBs per chassis   = 256
+ * x3950 (PCIX): 8 chassis, 16 PHBs per chassis   = 128
+ */
+#define MAX_PHB_BUS_NUM		256
+
+#define PHBS_PER_CALGARY	  4
 
 /* register offsets in Calgary's internal register space */
 static const unsigned long tar_offsets[] = {
@@ -1051,8 +1056,6 @@ static int __init calgary_init_one(struct pci_dev *dev)
 	struct iommu_table *tbl;
 	int ret;
 
-	BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
-
 	bbar = busno_to_bbar(dev->bus->number);
 	ret = calgary_setup_tar(dev, bbar);
 	if (ret)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e35219b32..cbcf013a0ec 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -28,6 +28,7 @@ unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
+EXPORT_SYMBOL_GPL(task_xstate_cachep);
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -371,7 +372,7 @@ static inline int hlt_use_halt(void)
 void default_idle(void)
 {
 	if (hlt_use_halt()) {
-		trace_power_start(POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1, smp_processor_id());
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
 		 * TS_POLLING-cleared state must be visible before we
@@ -441,7 +442,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
  */
 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 {
-	trace_power_start(POWER_CSTATE, (ax>>4)+1);
+	trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id());
 	if (!need_resched()) {
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
@@ -457,7 +458,7 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 static void mwait_idle(void)
 {
 	if (!need_resched()) {
-		trace_power_start(POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1, smp_processor_id());
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
@@ -478,7 +479,7 @@ static void mwait_idle(void)
  */
 static void poll_idle(void)
 {
-	trace_power_start(POWER_CSTATE, 0);
+	trace_power_start(POWER_CSTATE, 0, smp_processor_id());
 	local_irq_enable();
 	while (!need_resched())
 		cpu_relax();
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e72d3fc6547..939b9e98245 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -498,15 +498,10 @@ void force_hpet_resume(void)
  * See erratum #27 (Misinterpreted MSI Requests May Result in
  * Corrupted LPC DMA Data) in AMD Publication #46837,
  * "SB700 Family Product Errata", Rev. 1.0, March 2010.
- *
- * Also force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
  */
 static void force_disable_hpet_msi(struct pci_dev *unused)
 {
 	hpet_msi_disable = 1;
-	hpet_readback_cmp = 1;
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 8e1aac86b50..e3af342fe83 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -228,6 +228,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T7400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index a867940a6df..a60df9ae645 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -21,12 +21,6 @@
 #include <asm/cpu.h>
 #include <asm/stackprotector.h>
 
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
-#else
-# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
-#endif
-
 DEFINE_PER_CPU(int, cpu_number);
 EXPORT_PER_CPU_SYMBOL(cpu_number);
 
@@ -244,10 +238,19 @@ void __init setup_per_cpu_areas(void)
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
 			early_per_cpu_map(x86_cpu_to_node_map, cpu);
+		/*
+		 * Ensure that the boot cpu numa_node is correct when the boot
+		 * cpu is on a node that doesn't have memory installed.
+		 * Also cpu_up() will call cpu_to_node() for APs when
+		 * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+		 * up later with c_init aka intel_init/amd_init.
+		 * So set them all (boot cpu and all APs).
+		 */
+		set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
 #endif
 #endif
 		/*
-		 * Up to this point, the boot CPU has been using .data.init
+		 * Up to this point, the boot CPU has been using .init.data
 		 * area.  Reload any changed state for the boot CPU.
 		 */
 		if (cpu == boot_cpu_id)
@@ -263,14 +266,6 @@ void __init setup_per_cpu_areas(void)
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
-	/*
-	 * make sure boot cpu numa_node is right, when boot cpu is on the
-	 * node that doesn't have mem installed
-	 */
-	set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id));
-#endif
-
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
 
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 7ded57896c0..cb22acf3ed0 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -93,7 +93,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_end + 1);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
 		pentry++;
 	}
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 37462f1ddba..c4f33b2e77d 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -686,7 +686,7 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 static void __cpuinit announce_cpu(int cpu, int apicid)
 {
 	static int current_node = -1;
-	int node = cpu_to_node(cpu);
+	int node = early_cpu_to_node(cpu);
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (node != current_node) {
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 142d70c74b0..725ef4d17cd 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -526,6 +526,7 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
+	int user_icebp = 0;
 	unsigned long dr6;
 	int si_code;
 
@@ -534,6 +535,14 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	/* Filter out all the reserved bits which are preset to 1 */
 	dr6 &= ~DR6_RESERVED;
 
+	/*
+	 * If dr6 has no reason to give us about the origin of this trap,
+	 * then it's very likely the result of an icebp/int01 trap.
+	 * User wants a sigtrap for that.
+	 */
+	if (!dr6 && user_mode(regs))
+		user_icebp = 1;
+
 	/* Catch kmemcheck conditions first of all! */
 	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		return;
@@ -575,7 +584,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 		regs->flags &= ~X86_EFLAGS_TF;
 	}
 	si_code = get_si_code(tsk->thread.debugreg6);
-	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
 		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 2cc249718c4..d0bb52296fa 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -97,7 +97,7 @@ SECTIONS
 		HEAD_TEXT
 #ifdef CONFIG_X86_32
 		. = ALIGN(PAGE_SIZE);
-		*(.text.page_aligned)
+		*(.text..page_aligned)
 #endif
 		. = ALIGN(8);
 		_stext = .;
@@ -305,7 +305,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 		__bss_start = .;
-		*(.bss.page_aligned)
+		*(.bss..page_aligned)
 		*(.bss)
 		. = ALIGN(4);
 		__bss_stop = .;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 61a1e8c7e19..cd6da6bf3ec 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,6 +5,7 @@
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 
 #include <asm/bios_ebda.h>
 #include <asm/paravirt.h>
@@ -85,6 +86,7 @@ struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 };
 
 static void default_nmi_init(void) { };
+static int default_i8042_detect(void) { return 1; };
 
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
@@ -92,5 +94,8 @@ struct x86_platform_ops x86_platform = {
 	.set_wallclock			= mach_set_rtc_mmss,
 	.iommu_shutdown			= iommu_shutdown_noop,
 	.is_untracked_pat_range		= is_ISA_range,
-	.nmi_init			= default_nmi_init
+	.nmi_init			= default_nmi_init,
+	.i8042_detect			= default_i8042_detect
 };
+
+EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 5ac0bb465ed..b38bd8b92aa 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -9,6 +9,7 @@
  * privileged instructions:
  *
  * Copyright (C) 2006 Qumranet
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  *   Avi Kivity <avi@qumranet.com>
  *   Yaniv Kamay <yaniv@qumranet.com>
@@ -67,6 +68,9 @@
 #define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
 #define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
 #define SrcSI       (0xa<<4)	/* Source is in the DS:RSI */
+#define SrcImmFAddr (0xb<<4)	/* Source is immediate far address */
+#define SrcMemFAddr (0xc<<4)	/* Source is far address in memory */
+#define SrcAcc      (0xd<<4)	/* Source Accumulator */
 #define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
 #define ModRM       (1<<8)
@@ -88,10 +92,6 @@
 #define Src2CL      (1<<29)
 #define Src2ImmByte (2<<29)
 #define Src2One     (3<<29)
-#define Src2Imm16   (4<<29)
-#define Src2Mem16   (5<<29) /* Used for Ep encoding. First argument has to be
-			       in memory and second argument is located
-			       immediately after the first one in memory. */
 #define Src2Mask    (7<<29)
 
 enum {
@@ -124,15 +124,15 @@ static u32 opcode_table[256] = {
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
 	/* 0x28 - 0x2F */
 	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
 	/* 0x30 - 0x37 */
 	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
 	/* 0x38 - 0x3F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
@@ -170,20 +170,20 @@ static u32 opcode_table[256] = {
 	/* 0x88 - 0x8F */
 	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
 	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
-	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	DstMem | SrcNone | ModRM | Mov, ModRM | DstReg,
+	ImplicitOps | SrcMem16 | ModRM, Group | Group1A,
 	/* 0x90 - 0x97 */
 	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
 	/* 0x98 - 0x9F */
-	0, 0, SrcImm | Src2Imm16 | No64, 0,
+	0, 0, SrcImmFAddr | No64, 0,
 	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
-	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
-	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
+	ByteOp | DstAcc | SrcMem | Mov | MemAbs, DstAcc | SrcMem | Mov | MemAbs,
+	ByteOp | DstMem | SrcAcc | Mov | MemAbs, DstMem | SrcAcc | Mov | MemAbs,
 	ByteOp | SrcSI | DstDI | Mov | String, SrcSI | DstDI | Mov | String,
 	ByteOp | SrcSI | DstDI | String, SrcSI | DstDI | String,
 	/* 0xA8 - 0xAF */
-	0, 0, ByteOp | DstDI | Mov | String, DstDI | Mov | String,
+	DstAcc | SrcImmByte | ByteOp, DstAcc | SrcImm, ByteOp | DstDI | Mov | String, DstDI | Mov | String,
 	ByteOp | SrcSI | DstAcc | Mov | String, SrcSI | DstAcc | Mov | String,
 	ByteOp | DstDI | String, DstDI | String,
 	/* 0xB0 - 0xB7 */
@@ -215,7 +215,7 @@ static u32 opcode_table[256] = {
 	ByteOp | SrcImmUByte | DstAcc, SrcImmUByte | DstAcc,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImmU | Src2Imm16 | No64, SrcImmByte | ImplicitOps,
+	SrcImmFAddr | No64, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | DstAcc, SrcNone | DstAcc,
 	SrcNone | ByteOp | DstAcc, SrcNone | DstAcc,
 	/* 0xF0 - 0xF7 */
@@ -337,20 +337,20 @@ static u32 group_table[] = {
 	[Group1A*8] =
 	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
 	[Group3_Byte*8] =
-	ByteOp | SrcImm | DstMem | ModRM, 0,
+	ByteOp | SrcImm | DstMem | ModRM, ByteOp | SrcImm | DstMem | ModRM,
 	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
 	0, 0, 0, 0,
 	[Group3*8] =
-	DstMem | SrcImm | ModRM, 0,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
 	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
 	0, 0, 0, 0,
 	[Group4*8] =
-	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	ByteOp | DstMem | SrcNone | ModRM | Lock, ByteOp | DstMem | SrcNone | ModRM | Lock,
 	0, 0, 0, 0, 0, 0,
 	[Group5*8] =
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	DstMem | SrcNone | ModRM | Lock, DstMem | SrcNone | ModRM | Lock,
 	SrcMem | ModRM | Stack, 0,
-	SrcMem | ModRM | Stack, SrcMem | ModRM | Src2Mem16 | ImplicitOps,
+	SrcMem | ModRM | Stack, SrcMemFAddr | ModRM | ImplicitOps,
 	SrcMem | ModRM | Stack, 0,
 	[Group7*8] =
 	0, 0, ModRM | SrcMem | Priv, ModRM | SrcMem | Priv,
@@ -576,6 +576,13 @@ static u32 group2_table[] = {
 	(_type)_x;							\
 })
 
+#define insn_fetch_arr(_arr, _size, _eip)                                \
+({	rc = do_insn_fetch(ctxt, ops, (_eip), _arr, (_size));		\
+	if (rc != X86EMUL_CONTINUE)					\
+		goto done;						\
+	(_eip) += (_size);						\
+})
+
 static inline unsigned long ad_mask(struct decode_cache *c)
 {
 	return (1UL << (c->ad_bytes << 3)) - 1;
@@ -617,31 +624,66 @@ static void set_seg_override(struct decode_cache *c, int seg)
 	c->seg_override = seg;
 }
 
-static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt,
+			      struct x86_emulate_ops *ops, int seg)
 {
 	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
 		return 0;
 
-	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+	return ops->get_cached_segment_base(seg, ctxt->vcpu);
 }
 
 static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct x86_emulate_ops *ops,
 				       struct decode_cache *c)
 {
 	if (!c->has_seg_override)
 		return 0;
 
-	return seg_base(ctxt, c->seg_override);
+	return seg_base(ctxt, ops, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt,
+			     struct x86_emulate_ops *ops)
+{
+	return seg_base(ctxt, ops, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt,
+			     struct x86_emulate_ops *ops)
+{
+	return seg_base(ctxt, ops, VCPU_SREG_SS);
+}
+
+static void emulate_exception(struct x86_emulate_ctxt *ctxt, int vec,
+				      u32 error, bool valid)
+{
+	ctxt->exception = vec;
+	ctxt->error_code = error;
+	ctxt->error_code_valid = valid;
+	ctxt->restart = false;
+}
+
+static void emulate_gp(struct x86_emulate_ctxt *ctxt, int err)
+{
+	emulate_exception(ctxt, GP_VECTOR, err, true);
 }
 
-static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+static void emulate_pf(struct x86_emulate_ctxt *ctxt, unsigned long addr,
+		       int err)
 {
-	return seg_base(ctxt, VCPU_SREG_ES);
+	ctxt->cr2 = addr;
+	emulate_exception(ctxt, PF_VECTOR, err, true);
 }
 
-static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+static void emulate_ud(struct x86_emulate_ctxt *ctxt)
 {
-	return seg_base(ctxt, VCPU_SREG_SS);
+	emulate_exception(ctxt, UD_VECTOR, 0, false);
+}
+
+static void emulate_ts(struct x86_emulate_ctxt *ctxt, int err)
+{
+	emulate_exception(ctxt, TS_VECTOR, err, true);
 }
 
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
@@ -932,12 +974,9 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	/* we cannot decode insn before we complete previous rep insn */
 	WARN_ON(ctxt->restart);
 
-	/* Shadow copy of register state. Committed on successful emulation. */
-	memset(c, 0, sizeof(struct decode_cache));
 	c->eip = ctxt->eip;
 	c->fetch.start = c->fetch.end = c->eip;
-	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+	ctxt->cs_base = seg_base(ctxt, ops, VCPU_SREG_CS);
 
 	switch (mode) {
 	case X86EMUL_MODE_REAL:
@@ -1060,7 +1099,7 @@ done_prefixes:
 		set_seg_override(c, VCPU_SREG_DS);
 
 	if (!(!c->twobyte && c->b == 0x8d))
-		c->modrm_ea += seg_override_base(ctxt, c);
+		c->modrm_ea += seg_override_base(ctxt, ops, c);
 
 	if (c->ad_bytes != 8)
 		c->modrm_ea = (u32)c->modrm_ea;
@@ -1148,6 +1187,25 @@ done_prefixes:
 		else
 			c->src.val = insn_fetch(u8, 1, c->eip);
 		break;
+	case SrcAcc:
+		c->src.type = OP_REG;
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->src.ptr = &c->regs[VCPU_REGS_RAX];
+		switch (c->src.bytes) {
+			case 1:
+				c->src.val = *(u8 *)c->src.ptr;
+				break;
+			case 2:
+				c->src.val = *(u16 *)c->src.ptr;
+				break;
+			case 4:
+				c->src.val = *(u32 *)c->src.ptr;
+				break;
+			case 8:
+				c->src.val = *(u64 *)c->src.ptr;
+				break;
+		}
+		break;
 	case SrcOne:
 		c->src.bytes = 1;
 		c->src.val = 1;
@@ -1156,10 +1214,21 @@ done_prefixes:
 		c->src.type = OP_MEM;
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->src.ptr = (unsigned long *)
-			register_address(c,  seg_override_base(ctxt, c),
+			register_address(c,  seg_override_base(ctxt, ops, c),
 					 c->regs[VCPU_REGS_RSI]);
 		c->src.val = 0;
 		break;
+	case SrcImmFAddr:
+		c->src.type = OP_IMM;
+		c->src.ptr = (unsigned long *)c->eip;
+		c->src.bytes = c->op_bytes + 2;
+		insn_fetch_arr(c->src.valptr, c->src.bytes, c->eip);
+		break;
+	case SrcMemFAddr:
+		c->src.type = OP_MEM;
+		c->src.ptr = (unsigned long *)c->modrm_ea;
+		c->src.bytes = c->op_bytes + 2;
+		break;
 	}
 
 	/*
@@ -1179,22 +1248,10 @@ done_prefixes:
 		c->src2.bytes = 1;
 		c->src2.val = insn_fetch(u8, 1, c->eip);
 		break;
-	case Src2Imm16:
-		c->src2.type = OP_IMM;
-		c->src2.ptr = (unsigned long *)c->eip;
-		c->src2.bytes = 2;
-		c->src2.val = insn_fetch(u16, 2, c->eip);
-		break;
 	case Src2One:
 		c->src2.bytes = 1;
 		c->src2.val = 1;
 		break;
-	case Src2Mem16:
-		c->src2.type = OP_MEM;
-		c->src2.bytes = 2;
-		c->src2.ptr = (unsigned long *)(c->modrm_ea + c->src.bytes);
-		c->src2.val = 0;
-		break;
 	}
 
 	/* Decode and fetch the destination operand: register or memory. */
@@ -1253,7 +1310,7 @@ done_prefixes:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)
-			register_address(c, es_base(ctxt),
+			register_address(c, es_base(ctxt, ops),
 					 c->regs[VCPU_REGS_RDI]);
 		c->dst.val = 0;
 		break;
@@ -1263,6 +1320,37 @@ done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
 
+static int read_emulated(struct x86_emulate_ctxt *ctxt,
+			 struct x86_emulate_ops *ops,
+			 unsigned long addr, void *dest, unsigned size)
+{
+	int rc;
+	struct read_cache *mc = &ctxt->decode.mem_read;
+	u32 err;
+
+	while (size) {
+		int n = min(size, 8u);
+		size -= n;
+		if (mc->pos < mc->end)
+			goto read_cached;
+
+		rc = ops->read_emulated(addr, mc->data + mc->end, n, &err,
+					ctxt->vcpu);
+		if (rc == X86EMUL_PROPAGATE_FAULT)
+			emulate_pf(ctxt, addr, err);
+		if (rc != X86EMUL_CONTINUE)
+			return rc;
+		mc->end += n;
+
+	read_cached:
+		memcpy(dest, mc->data + mc->pos, n);
+		mc->pos += n;
+		dest += n;
+		addr += n;
+	}
+	return X86EMUL_CONTINUE;
+}
+
 static int pio_in_emulated(struct x86_emulate_ctxt *ctxt,
 			   struct x86_emulate_ops *ops,
 			   unsigned int size, unsigned short port,
@@ -1330,13 +1418,13 @@ static int read_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	get_descriptor_table_ptr(ctxt, ops, selector, &dt);
 
 	if (dt.size < index * 8 + 7) {
-		kvm_inject_gp(ctxt->vcpu, selector & 0xfffc);
+		emulate_gp(ctxt, selector & 0xfffc);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 	addr = dt.address + index * 8;
 	ret = ops->read_std(addr, desc, sizeof *desc, ctxt->vcpu,  &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT)
-		kvm_inject_page_fault(ctxt->vcpu, addr, err);
+		emulate_pf(ctxt, addr, err);
 
        return ret;
 }
@@ -1355,14 +1443,14 @@ static int write_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	get_descriptor_table_ptr(ctxt, ops, selector, &dt);
 
 	if (dt.size < index * 8 + 7) {
-		kvm_inject_gp(ctxt->vcpu, selector & 0xfffc);
+		emulate_gp(ctxt, selector & 0xfffc);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
 	addr = dt.address + index * 8;
 	ret = ops->write_std(addr, desc, sizeof *desc, ctxt->vcpu, &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT)
-		kvm_inject_page_fault(ctxt->vcpu, addr, err);
+		emulate_pf(ctxt, addr, err);
 
 	return ret;
 }
@@ -1481,11 +1569,70 @@ load:
 	ops->set_cached_descriptor(&seg_desc, seg, ctxt->vcpu);
 	return X86EMUL_CONTINUE;
 exception:
-	kvm_queue_exception_e(ctxt->vcpu, err_vec, err_code);
+	emulate_exception(ctxt, err_vec, err_code, true);
 	return X86EMUL_PROPAGATE_FAULT;
 }
 
-static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
+static inline int writeback(struct x86_emulate_ctxt *ctxt,
+			    struct x86_emulate_ops *ops)
+{
+	int rc;
+	struct decode_cache *c = &ctxt->decode;
+	u32 err;
+
+	switch (c->dst.type) {
+	case OP_REG:
+		/* The 4-byte case *is* correct:
+		 * in 64-bit mode we zero-extend.
+		 */
+		switch (c->dst.bytes) {
+		case 1:
+			*(u8 *)c->dst.ptr = (u8)c->dst.val;
+			break;
+		case 2:
+			*(u16 *)c->dst.ptr = (u16)c->dst.val;
+			break;
+		case 4:
+			*c->dst.ptr = (u32)c->dst.val;
+			break;	/* 64b: zero-ext */
+		case 8:
+			*c->dst.ptr = c->dst.val;
+			break;
+		}
+		break;
+	case OP_MEM:
+		if (c->lock_prefix)
+			rc = ops->cmpxchg_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.orig_val,
+					&c->dst.val,
+					c->dst.bytes,
+					&err,
+					ctxt->vcpu);
+		else
+			rc = ops->write_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.val,
+					c->dst.bytes,
+					&err,
+					ctxt->vcpu);
+		if (rc == X86EMUL_PROPAGATE_FAULT)
+			emulate_pf(ctxt,
+					      (unsigned long)c->dst.ptr, err);
+		if (rc != X86EMUL_CONTINUE)
+			return rc;
+		break;
+	case OP_NONE:
+		/* no writeback */
+		break;
+	default:
+		break;
+	}
+	return X86EMUL_CONTINUE;
+}
+
+static inline void emulate_push(struct x86_emulate_ctxt *ctxt,
+				struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
 
@@ -1493,7 +1640,7 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 	c->dst.bytes = c->op_bytes;
 	c->dst.val = c->src.val;
 	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt, ops),
 					       c->regs[VCPU_REGS_RSP]);
 }
 
@@ -1504,9 +1651,9 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
-						 c->regs[VCPU_REGS_RSP]),
-				dest, len, ctxt->vcpu);
+	rc = read_emulated(ctxt, ops, register_address(c, ss_base(ctxt, ops),
+						       c->regs[VCPU_REGS_RSP]),
+			   dest, len);
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
@@ -1541,7 +1688,7 @@ static int emulate_popf(struct x86_emulate_ctxt *ctxt,
 		break;
 	case X86EMUL_MODE_VM86:
 		if (iopl < 3) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
 		change_mask |= EFLG_IF;
@@ -1557,15 +1704,14 @@ static int emulate_popf(struct x86_emulate_ctxt *ctxt,
 	return rc;
 }
 
-static void emulate_push_sreg(struct x86_emulate_ctxt *ctxt, int seg)
+static void emulate_push_sreg(struct x86_emulate_ctxt *ctxt,
+			      struct x86_emulate_ops *ops, int seg)
 {
 	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment segment;
 
-	kvm_x86_ops->get_segment(ctxt->vcpu, &segment, seg);
+	c->src.val = ops->get_segment_selector(seg, ctxt->vcpu);
 
-	c->src.val = segment.selector;
-	emulate_push(ctxt);
+	emulate_push(ctxt, ops);
 }
 
 static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
@@ -1583,19 +1729,31 @@ static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
 	return rc;
 }
 
-static void emulate_pusha(struct x86_emulate_ctxt *ctxt)
+static int emulate_pusha(struct x86_emulate_ctxt *ctxt,
+			  struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
 	unsigned long old_esp = c->regs[VCPU_REGS_RSP];
+	int rc = X86EMUL_CONTINUE;
 	int reg = VCPU_REGS_RAX;
 
 	while (reg <= VCPU_REGS_RDI) {
 		(reg == VCPU_REGS_RSP) ?
 		(c->src.val = old_esp) : (c->src.val = c->regs[reg]);
 
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
+
+		rc = writeback(ctxt, ops);
+		if (rc != X86EMUL_CONTINUE)
+			return rc;
+
 		++reg;
 	}
+
+	/* Disable writeback. */
+	c->dst.type = OP_NONE;
+
+	return rc;
 }
 
 static int emulate_popa(struct x86_emulate_ctxt *ctxt,
@@ -1695,14 +1853,14 @@ static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
 		old_eip = c->eip;
 		c->eip = c->src.val;
 		c->src.val = old_eip;
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	}
 	case 4: /* jmp abs */
 		c->eip = c->src.val;
 		break;
 	case 6:	/* push */
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	}
 	return X86EMUL_CONTINUE;
@@ -1748,145 +1906,82 @@ static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
 	return rc;
 }
 
-static inline int writeback(struct x86_emulate_ctxt *ctxt,
-			    struct x86_emulate_ops *ops)
-{
-	int rc;
-	struct decode_cache *c = &ctxt->decode;
-
-	switch (c->dst.type) {
-	case OP_REG:
-		/* The 4-byte case *is* correct:
-		 * in 64-bit mode we zero-extend.
-		 */
-		switch (c->dst.bytes) {
-		case 1:
-			*(u8 *)c->dst.ptr = (u8)c->dst.val;
-			break;
-		case 2:
-			*(u16 *)c->dst.ptr = (u16)c->dst.val;
-			break;
-		case 4:
-			*c->dst.ptr = (u32)c->dst.val;
-			break;	/* 64b: zero-ext */
-		case 8:
-			*c->dst.ptr = c->dst.val;
-			break;
-		}
-		break;
-	case OP_MEM:
-		if (c->lock_prefix)
-			rc = ops->cmpxchg_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.orig_val,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		else
-			rc = ops->write_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		if (rc != X86EMUL_CONTINUE)
-			return rc;
-		break;
-	case OP_NONE:
-		/* no writeback */
-		break;
-	default:
-		break;
-	}
-	return X86EMUL_CONTINUE;
-}
-
-static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
-{
-	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
-	/*
-	 * an sti; sti; sequence only disable interrupts for the first
-	 * instruction. So, if the last instruction, be it emulated or
-	 * not, left the system with the INT_STI flag enabled, it
-	 * means that the last instruction is an sti. We should not
-	 * leave the flag on in this case. The same goes for mov ss
-	 */
-	if (!(int_shadow & mask))
-		ctxt->interruptibility = mask;
-}
-
 static inline void
 setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
-	struct kvm_segment *cs, struct kvm_segment *ss)
+			struct x86_emulate_ops *ops, struct desc_struct *cs,
+			struct desc_struct *ss)
 {
-	memset(cs, 0, sizeof(struct kvm_segment));
-	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
-	memset(ss, 0, sizeof(struct kvm_segment));
+	memset(cs, 0, sizeof(struct desc_struct));
+	ops->get_cached_descriptor(cs, VCPU_SREG_CS, ctxt->vcpu);
+	memset(ss, 0, sizeof(struct desc_struct));
 
 	cs->l = 0;		/* will be adjusted later */
-	cs->base = 0;		/* flat segment */
+	set_desc_base(cs, 0);	/* flat segment */
 	cs->g = 1;		/* 4kb granularity */
-	cs->limit = 0xffffffff;	/* 4GB limit */
+	set_desc_limit(cs, 0xfffff);	/* 4GB limit */
 	cs->type = 0x0b;	/* Read, Execute, Accessed */
 	cs->s = 1;
 	cs->dpl = 0;		/* will be adjusted later */
-	cs->present = 1;
-	cs->db = 1;
+	cs->p = 1;
+	cs->d = 1;
 
-	ss->unusable = 0;
-	ss->base = 0;		/* flat segment */
-	ss->limit = 0xffffffff;	/* 4GB limit */
+	set_desc_base(ss, 0);	/* flat segment */
+	set_desc_limit(ss, 0xfffff);	/* 4GB limit */
 	ss->g = 1;		/* 4kb granularity */
 	ss->s = 1;
 	ss->type = 0x03;	/* Read/Write, Accessed */
-	ss->db = 1;		/* 32bit stack segment */
+	ss->d = 1;		/* 32bit stack segment */
 	ss->dpl = 0;
-	ss->present = 1;
+	ss->p = 1;
 }
 
 static int
-emulate_syscall(struct x86_emulate_ctxt *ctxt)
+emulate_syscall(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
+	struct desc_struct cs, ss;
 	u64 msr_data;
+	u16 cs_sel, ss_sel;
 
 	/* syscall is not available in real mode */
 	if (ctxt->mode == X86EMUL_MODE_REAL ||
 	    ctxt->mode == X86EMUL_MODE_VM86) {
-		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		emulate_ud(ctxt);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
-	setup_syscalls_segments(ctxt, &cs, &ss);
+	setup_syscalls_segments(ctxt, ops, &cs, &ss);
 
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+	ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
 	msr_data >>= 32;
-	cs.selector = (u16)(msr_data & 0xfffc);
-	ss.selector = (u16)(msr_data + 8);
+	cs_sel = (u16)(msr_data & 0xfffc);
+	ss_sel = (u16)(msr_data + 8);
 
 	if (is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
+		cs.d = 0;
 		cs.l = 1;
 	}
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+	ops->set_cached_descriptor(&cs, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_segment_selector(cs_sel, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_cached_descriptor(&ss, VCPU_SREG_SS, ctxt->vcpu);
+	ops->set_segment_selector(ss_sel, VCPU_SREG_SS, ctxt->vcpu);
 
 	c->regs[VCPU_REGS_RCX] = c->eip;
 	if (is_long_mode(ctxt->vcpu)) {
 #ifdef CONFIG_X86_64
 		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
 
-		kvm_x86_ops->get_msr(ctxt->vcpu,
-			ctxt->mode == X86EMUL_MODE_PROT64 ?
-			MSR_LSTAR : MSR_CSTAR, &msr_data);
+		ops->get_msr(ctxt->vcpu,
+			     ctxt->mode == X86EMUL_MODE_PROT64 ?
+			     MSR_LSTAR : MSR_CSTAR, &msr_data);
 		c->eip = msr_data;
 
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+		ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
 		ctxt->eflags &= ~(msr_data | EFLG_RF);
 #endif
 	} else {
 		/* legacy mode */
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+		ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
 		c->eip = (u32)msr_data;
 
 		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
@@ -1896,15 +1991,16 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
 }
 
 static int
-emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+emulate_sysenter(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
+	struct desc_struct cs, ss;
 	u64 msr_data;
+	u16 cs_sel, ss_sel;
 
 	/* inject #GP if in real mode */
 	if (ctxt->mode == X86EMUL_MODE_REAL) {
-		kvm_inject_gp(ctxt->vcpu, 0);
+		emulate_gp(ctxt, 0);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
@@ -1912,67 +2008,70 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	* Therefore, we inject an #UD.
 	*/
 	if (ctxt->mode == X86EMUL_MODE_PROT64) {
-		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		emulate_ud(ctxt);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
-	setup_syscalls_segments(ctxt, &cs, &ss);
+	setup_syscalls_segments(ctxt, ops, &cs, &ss);
 
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
 	switch (ctxt->mode) {
 	case X86EMUL_MODE_PROT32:
 		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
 		break;
 	case X86EMUL_MODE_PROT64:
 		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
 		break;
 	}
 
 	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
-	cs.selector = (u16)msr_data;
-	cs.selector &= ~SELECTOR_RPL_MASK;
-	ss.selector = cs.selector + 8;
-	ss.selector &= ~SELECTOR_RPL_MASK;
+	cs_sel = (u16)msr_data;
+	cs_sel &= ~SELECTOR_RPL_MASK;
+	ss_sel = cs_sel + 8;
+	ss_sel &= ~SELECTOR_RPL_MASK;
 	if (ctxt->mode == X86EMUL_MODE_PROT64
 		|| is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
+		cs.d = 0;
 		cs.l = 1;
 	}
 
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+	ops->set_cached_descriptor(&cs, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_segment_selector(cs_sel, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_cached_descriptor(&ss, VCPU_SREG_SS, ctxt->vcpu);
+	ops->set_segment_selector(ss_sel, VCPU_SREG_SS, ctxt->vcpu);
 
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+	ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
 	c->eip = msr_data;
 
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+	ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
 	c->regs[VCPU_REGS_RSP] = msr_data;
 
 	return X86EMUL_CONTINUE;
 }
 
 static int
-emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+emulate_sysexit(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
+	struct desc_struct cs, ss;
 	u64 msr_data;
 	int usermode;
+	u16 cs_sel, ss_sel;
 
 	/* inject #GP if in real mode or Virtual 8086 mode */
 	if (ctxt->mode == X86EMUL_MODE_REAL ||
 	    ctxt->mode == X86EMUL_MODE_VM86) {
-		kvm_inject_gp(ctxt->vcpu, 0);
+		emulate_gp(ctxt, 0);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
-	setup_syscalls_segments(ctxt, &cs, &ss);
+	setup_syscalls_segments(ctxt, ops, &cs, &ss);
 
 	if ((c->rex_prefix & 0x8) != 0x0)
 		usermode = X86EMUL_MODE_PROT64;
@@ -1981,35 +2080,37 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
 
 	cs.dpl = 3;
 	ss.dpl = 3;
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
 	switch (usermode) {
 	case X86EMUL_MODE_PROT32:
-		cs.selector = (u16)(msr_data + 16);
+		cs_sel = (u16)(msr_data + 16);
 		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
-		ss.selector = (u16)(msr_data + 24);
+		ss_sel = (u16)(msr_data + 24);
 		break;
 	case X86EMUL_MODE_PROT64:
-		cs.selector = (u16)(msr_data + 32);
+		cs_sel = (u16)(msr_data + 32);
 		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
-		ss.selector = cs.selector + 8;
-		cs.db = 0;
+		ss_sel = cs_sel + 8;
+		cs.d = 0;
 		cs.l = 1;
 		break;
 	}
-	cs.selector |= SELECTOR_RPL_MASK;
-	ss.selector |= SELECTOR_RPL_MASK;
+	cs_sel |= SELECTOR_RPL_MASK;
+	ss_sel |= SELECTOR_RPL_MASK;
 
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+	ops->set_cached_descriptor(&cs, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_segment_selector(cs_sel, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_cached_descriptor(&ss, VCPU_SREG_SS, ctxt->vcpu);
+	ops->set_segment_selector(ss_sel, VCPU_SREG_SS, ctxt->vcpu);
 
-	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
-	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+	c->eip = c->regs[VCPU_REGS_RDX];
+	c->regs[VCPU_REGS_RSP] = c->regs[VCPU_REGS_RCX];
 
 	return X86EMUL_CONTINUE;
 }
@@ -2030,25 +2131,25 @@ static bool emulator_io_port_access_allowed(struct x86_emulate_ctxt *ctxt,
 					    struct x86_emulate_ops *ops,
 					    u16 port, u16 len)
 {
-	struct kvm_segment tr_seg;
+	struct desc_struct tr_seg;
 	int r;
 	u16 io_bitmap_ptr;
 	u8 perm, bit_idx = port & 0x7;
 	unsigned mask = (1 << len) - 1;
 
-	kvm_get_segment(ctxt->vcpu, &tr_seg, VCPU_SREG_TR);
-	if (tr_seg.unusable)
+	ops->get_cached_descriptor(&tr_seg, VCPU_SREG_TR, ctxt->vcpu);
+	if (!tr_seg.p)
 		return false;
-	if (tr_seg.limit < 103)
+	if (desc_limit_scaled(&tr_seg) < 103)
 		return false;
-	r = ops->read_std(tr_seg.base + 102, &io_bitmap_ptr, 2, ctxt->vcpu,
-			  NULL);
+	r = ops->read_std(get_desc_base(&tr_seg) + 102, &io_bitmap_ptr, 2,
+			  ctxt->vcpu, NULL);
 	if (r != X86EMUL_CONTINUE)
 		return false;
-	if (io_bitmap_ptr + port/8 > tr_seg.limit)
+	if (io_bitmap_ptr + port/8 > desc_limit_scaled(&tr_seg))
 		return false;
-	r = ops->read_std(tr_seg.base + io_bitmap_ptr + port/8, &perm, 1,
-			  ctxt->vcpu, NULL);
+	r = ops->read_std(get_desc_base(&tr_seg) + io_bitmap_ptr + port/8,
+			  &perm, 1, ctxt->vcpu, NULL);
 	if (r != X86EMUL_CONTINUE)
 		return false;
 	if ((perm >> bit_idx) & mask)
@@ -2066,17 +2167,6 @@ static bool emulator_io_permited(struct x86_emulate_ctxt *ctxt,
 	return true;
 }
 
-static u32 get_cached_descriptor_base(struct x86_emulate_ctxt *ctxt,
-				      struct x86_emulate_ops *ops,
-				      int seg)
-{
-	struct desc_struct desc;
-	if (ops->get_cached_descriptor(&desc, seg, ctxt->vcpu))
-		return get_desc_base(&desc);
-	else
-		return ~0;
-}
-
 static void save_state_to_tss16(struct x86_emulate_ctxt *ctxt,
 				struct x86_emulate_ops *ops,
 				struct tss_segment_16 *tss)
@@ -2165,7 +2255,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt,
 			    &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		emulate_pf(ctxt, old_tss_base, err);
 		return ret;
 	}
 
@@ -2175,7 +2265,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt,
 			     &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		emulate_pf(ctxt, old_tss_base, err);
 		return ret;
 	}
 
@@ -2183,7 +2273,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt,
 			    &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+		emulate_pf(ctxt, new_tss_base, err);
 		return ret;
 	}
 
@@ -2196,7 +2286,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt,
 				     ctxt->vcpu, &err);
 		if (ret == X86EMUL_PROPAGATE_FAULT) {
 			/* FIXME: need to provide precise fault address */
-			kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+			emulate_pf(ctxt, new_tss_base, err);
 			return ret;
 		}
 	}
@@ -2238,7 +2328,10 @@ static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int ret;
 
-	ops->set_cr(3, tss->cr3, ctxt->vcpu);
+	if (ops->set_cr(3, tss->cr3, ctxt->vcpu)) {
+		emulate_gp(ctxt, 0);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
 	c->eip = tss->eip;
 	ctxt->eflags = tss->eflags | 2;
 	c->regs[VCPU_REGS_RAX] = tss->eax;
@@ -2304,7 +2397,7 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt,
 			    &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		emulate_pf(ctxt, old_tss_base, err);
 		return ret;
 	}
 
@@ -2314,7 +2407,7 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt,
 			     &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		emulate_pf(ctxt, old_tss_base, err);
 		return ret;
 	}
 
@@ -2322,7 +2415,7 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt,
 			    &err);
 	if (ret == X86EMUL_PROPAGATE_FAULT) {
 		/* FIXME: need to provide precise fault address */
-		kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+		emulate_pf(ctxt, new_tss_base, err);
 		return ret;
 	}
 
@@ -2335,7 +2428,7 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt,
 				     ctxt->vcpu, &err);
 		if (ret == X86EMUL_PROPAGATE_FAULT) {
 			/* FIXME: need to provide precise fault address */
-			kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+			emulate_pf(ctxt, new_tss_base, err);
 			return ret;
 		}
 	}
@@ -2352,7 +2445,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 	int ret;
 	u16 old_tss_sel = ops->get_segment_selector(VCPU_SREG_TR, ctxt->vcpu);
 	ulong old_tss_base =
-		get_cached_descriptor_base(ctxt, ops, VCPU_SREG_TR);
+		ops->get_cached_segment_base(VCPU_SREG_TR, ctxt->vcpu);
 	u32 desc_limit;
 
 	/* FIXME: old_tss_base == ~0 ? */
@@ -2369,7 +2462,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 	if (reason != TASK_SWITCH_IRET) {
 		if ((tss_selector & 3) > next_tss_desc.dpl ||
 		    ops->cpl(ctxt->vcpu) > next_tss_desc.dpl) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			return X86EMUL_PROPAGATE_FAULT;
 		}
 	}
@@ -2378,8 +2471,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 	if (!next_tss_desc.p ||
 	    ((desc_limit < 0x67 && (next_tss_desc.type & 8)) ||
 	     desc_limit < 0x2b)) {
-		kvm_queue_exception_e(ctxt->vcpu, TS_VECTOR,
-				      tss_selector & 0xfffc);
+		emulate_ts(ctxt, tss_selector & 0xfffc);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
@@ -2425,7 +2517,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 		c->op_bytes = c->ad_bytes = (next_tss_desc.type & 8) ? 4 : 2;
 		c->lock_prefix = 0;
 		c->src.val = (unsigned long) error_code;
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 	}
 
 	return ret;
@@ -2439,18 +2531,16 @@ int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	memset(c, 0, sizeof(struct decode_cache));
 	c->eip = ctxt->eip;
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 	c->dst.type = OP_NONE;
 
 	rc = emulator_do_task_switch(ctxt, ops, tss_selector, reason,
 				     has_error_code, error_code);
 
 	if (rc == X86EMUL_CONTINUE) {
-		memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
-		kvm_rip_write(ctxt->vcpu, c->eip);
 		rc = writeback(ctxt, ops);
+		if (rc == X86EMUL_CONTINUE)
+			ctxt->eip = c->eip;
 	}
 
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
@@ -2474,29 +2564,22 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	int rc = X86EMUL_CONTINUE;
 	int saved_dst_type = c->dst.type;
 
-	ctxt->interruptibility = 0;
-
-	/* Shadow copy of register state. Committed on successful emulation.
-	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
-	 * modify them.
-	 */
-
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+	ctxt->decode.mem_read.pos = 0;
 
 	if (ctxt->mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
-		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		emulate_ud(ctxt);
 		goto done;
 	}
 
 	/* LOCK prefix is allowed only with some instructions */
 	if (c->lock_prefix && (!(c->d & Lock) || c->dst.type != OP_MEM)) {
-		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		emulate_ud(ctxt);
 		goto done;
 	}
 
 	/* Privileged instruction can be executed only in CPL=0 */
 	if ((c->d & Priv) && ops->cpl(ctxt->vcpu)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
+		emulate_gp(ctxt, 0);
 		goto done;
 	}
 
@@ -2506,7 +2589,7 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 		if (address_mask(c, c->regs[VCPU_REGS_RCX]) == 0) {
 		string_done:
 			ctxt->restart = false;
-			kvm_rip_write(ctxt->vcpu, c->eip);
+			ctxt->eip = c->eip;
 			goto done;
 		}
 		/* The second termination condition only applies for REPE
@@ -2529,20 +2612,16 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	}
 
 	if (c->src.type == OP_MEM) {
-		rc = ops->read_emulated((unsigned long)c->src.ptr,
-					&c->src.val,
-					c->src.bytes,
-					ctxt->vcpu);
+		rc = read_emulated(ctxt, ops, (unsigned long)c->src.ptr,
+					c->src.valptr, c->src.bytes);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		c->src.orig_val = c->src.val;
 	}
 
 	if (c->src2.type == OP_MEM) {
-		rc = ops->read_emulated((unsigned long)c->src2.ptr,
-					&c->src2.val,
-					c->src2.bytes,
-					ctxt->vcpu);
+		rc = read_emulated(ctxt, ops, (unsigned long)c->src2.ptr,
+					&c->src2.val, c->src2.bytes);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 	}
@@ -2553,8 +2632,8 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 
 	if ((c->dst.type == OP_MEM) && !(c->d & Mov)) {
 		/* optimisation - avoid slow emulated read if Mov */
-		rc = ops->read_emulated((unsigned long)c->dst.ptr, &c->dst.val,
-					c->dst.bytes, ctxt->vcpu);
+		rc = read_emulated(ctxt, ops, (unsigned long)c->dst.ptr,
+				   &c->dst.val, c->dst.bytes);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 	}
@@ -2571,7 +2650,7 @@ special_insn:
 		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x06:		/* push es */
-		emulate_push_sreg(ctxt, VCPU_SREG_ES);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_ES);
 		break;
 	case 0x07:		/* pop es */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_ES);
@@ -2583,14 +2662,14 @@ special_insn:
 		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x0e:		/* push cs */
-		emulate_push_sreg(ctxt, VCPU_SREG_CS);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_CS);
 		break;
 	case 0x10 ... 0x15:
 	      adc:		/* adc */
 		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x16:		/* push ss */
-		emulate_push_sreg(ctxt, VCPU_SREG_SS);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_SS);
 		break;
 	case 0x17:		/* pop ss */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_SS);
@@ -2602,7 +2681,7 @@ special_insn:
 		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x1e:		/* push ds */
-		emulate_push_sreg(ctxt, VCPU_SREG_DS);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_DS);
 		break;
 	case 0x1f:		/* pop ds */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_DS);
@@ -2632,7 +2711,7 @@ special_insn:
 		emulate_1op("dec", c->dst, ctxt->eflags);
 		break;
 	case 0x50 ... 0x57:  /* push reg */
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
@@ -2641,7 +2720,9 @@ special_insn:
 			goto done;
 		break;
 	case 0x60:	/* pusha */
-		emulate_pusha(ctxt);
+		rc = emulate_pusha(ctxt, ops);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
 		break;
 	case 0x61:	/* popa */
 		rc = emulate_popa(ctxt, ops);
@@ -2655,14 +2736,14 @@ special_insn:
 		break;
 	case 0x68: /* push imm */
 	case 0x6a: /* push imm8 */
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	case 0x6c:		/* insb */
 	case 0x6d:		/* insw/insd */
 		c->dst.bytes = min(c->dst.bytes, 4u);
 		if (!emulator_io_permited(ctxt, ops, c->regs[VCPU_REGS_RDX],
 					  c->dst.bytes)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
 		if (!pio_in_emulated(ctxt, ops, c->dst.bytes,
@@ -2674,7 +2755,7 @@ special_insn:
 		c->src.bytes = min(c->src.bytes, 4u);
 		if (!emulator_io_permited(ctxt, ops, c->regs[VCPU_REGS_RDX],
 					  c->src.bytes)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
 		ops->pio_out_emulated(c->src.bytes, c->regs[VCPU_REGS_RDX],
@@ -2707,6 +2788,7 @@ special_insn:
 		}
 		break;
 	case 0x84 ... 0x85:
+	test:
 		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x86 ... 0x87:	/* xchg */
@@ -2735,18 +2817,13 @@ special_insn:
 		break;
 	case 0x88 ... 0x8b:	/* mov */
 		goto mov;
-	case 0x8c: { /* mov r/m, sreg */
-		struct kvm_segment segreg;
-
-		if (c->modrm_reg <= VCPU_SREG_GS)
-			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
-		else {
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+	case 0x8c:  /* mov r/m, sreg */
+		if (c->modrm_reg > VCPU_SREG_GS) {
+			emulate_ud(ctxt);
 			goto done;
 		}
-		c->dst.val = segreg.selector;
+		c->dst.val = ops->get_segment_selector(c->modrm_reg, ctxt->vcpu);
 		break;
-	}
 	case 0x8d: /* lea r16/r32, m */
 		c->dst.val = c->modrm_ea;
 		break;
@@ -2757,12 +2834,12 @@ special_insn:
 
 		if (c->modrm_reg == VCPU_SREG_CS ||
 		    c->modrm_reg > VCPU_SREG_GS) {
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			emulate_ud(ctxt);
 			goto done;
 		}
 
 		if (c->modrm_reg == VCPU_SREG_SS)
-			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_MOV_SS);
+			ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
 
 		rc = load_segment_descriptor(ctxt, ops, sel, c->modrm_reg);
 
@@ -2775,19 +2852,19 @@ special_insn:
 			goto done;
 		break;
 	case 0x90: /* nop / xchg r8,rax */
-		if (!(c->rex_prefix & 1)) { /* nop */
-			c->dst.type = OP_NONE;
+		if (c->dst.ptr == (unsigned long *)&c->regs[VCPU_REGS_RAX]) {
+			c->dst.type = OP_NONE;  /* nop */
 			break;
 		}
 	case 0x91 ... 0x97: /* xchg reg,rax */
-		c->src.type = c->dst.type = OP_REG;
-		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.type = OP_REG;
+		c->src.bytes = c->op_bytes;
 		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
 		c->src.val = *(c->src.ptr);
 		goto xchg;
 	case 0x9c: /* pushf */
 		c->src.val =  (unsigned long) ctxt->eflags;
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	case 0x9d: /* popf */
 		c->dst.type = OP_REG;
@@ -2797,19 +2874,15 @@ special_insn:
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
-	case 0xa0 ... 0xa1:	/* mov */
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		c->dst.val = c->src.val;
-		break;
-	case 0xa2 ... 0xa3:	/* mov */
-		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
-		break;
+	case 0xa0 ... 0xa3:	/* mov */
 	case 0xa4 ... 0xa5:	/* movs */
 		goto mov;
 	case 0xa6 ... 0xa7:	/* cmps */
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
 		goto cmp;
+	case 0xa8 ... 0xa9:	/* test ax, imm */
+		goto test;
 	case 0xaa ... 0xab:	/* stos */
 		c->dst.val = c->regs[VCPU_REGS_RAX];
 		break;
@@ -2855,19 +2928,23 @@ special_insn:
 		long int rel = c->src.val;
 		c->src.val = (unsigned long) c->eip;
 		jmp_rel(c, rel);
-		emulate_push(ctxt);
+		emulate_push(ctxt, ops);
 		break;
 	}
 	case 0xe9: /* jmp rel */
 		goto jmp;
-	case 0xea: /* jmp far */
+	case 0xea: { /* jmp far */
+		unsigned short sel;
 	jump_far:
-		if (load_segment_descriptor(ctxt, ops, c->src2.val,
-					    VCPU_SREG_CS))
+		memcpy(&sel, c->src.valptr + c->op_bytes, 2);
+
+		if (load_segment_descriptor(ctxt, ops, sel, VCPU_SREG_CS))
 			goto done;
 
-		c->eip = c->src.val;
+		c->eip = 0;
+		memcpy(&c->eip, c->src.valptr, c->op_bytes);
 		break;
+	}
 	case 0xeb:
 	      jmp:		/* jmp rel short */
 		jmp_rel(c, c->src.val);
@@ -2879,20 +2956,20 @@ special_insn:
 	do_io_in:
 		c->dst.bytes = min(c->dst.bytes, 4u);
 		if (!emulator_io_permited(ctxt, ops, c->src.val, c->dst.bytes)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
 		if (!pio_in_emulated(ctxt, ops, c->dst.bytes, c->src.val,
 				     &c->dst.val))
 			goto done; /* IO is needed */
 		break;
-	case 0xee: /* out al,dx */
-	case 0xef: /* out (e/r)ax,dx */
+	case 0xee: /* out dx,al */
+	case 0xef: /* out dx,(e/r)ax */
 		c->src.val = c->regs[VCPU_REGS_RDX];
 	do_io_out:
 		c->dst.bytes = min(c->dst.bytes, 4u);
 		if (!emulator_io_permited(ctxt, ops, c->src.val, c->dst.bytes)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
 		ops->pio_out_emulated(c->dst.bytes, c->src.val, &c->dst.val, 1,
@@ -2916,18 +2993,20 @@ special_insn:
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
 	case 0xfa: /* cli */
-		if (emulator_bad_iopl(ctxt, ops))
-			kvm_inject_gp(ctxt->vcpu, 0);
-		else {
+		if (emulator_bad_iopl(ctxt, ops)) {
+			emulate_gp(ctxt, 0);
+			goto done;
+		} else {
 			ctxt->eflags &= ~X86_EFLAGS_IF;
 			c->dst.type = OP_NONE;	/* Disable writeback. */
 		}
 		break;
 	case 0xfb: /* sti */
-		if (emulator_bad_iopl(ctxt, ops))
-			kvm_inject_gp(ctxt->vcpu, 0);
-		else {
-			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_STI);
+		if (emulator_bad_iopl(ctxt, ops)) {
+			emulate_gp(ctxt, 0);
+			goto done;
+		} else {
+			ctxt->interruptibility = KVM_X86_SHADOW_INT_STI;
 			ctxt->eflags |= X86_EFLAGS_IF;
 			c->dst.type = OP_NONE;	/* Disable writeback. */
 		}
@@ -2964,11 +3043,12 @@ writeback:
 	c->dst.type = saved_dst_type;
 
 	if ((c->d & SrcMask) == SrcSI)
-		string_addr_inc(ctxt, seg_override_base(ctxt, c), VCPU_REGS_RSI,
-				&c->src);
+		string_addr_inc(ctxt, seg_override_base(ctxt, ops, c),
+				VCPU_REGS_RSI, &c->src);
 
 	if ((c->d & DstMask) == DstDI)
-		string_addr_inc(ctxt, es_base(ctxt), VCPU_REGS_RDI, &c->dst);
+		string_addr_inc(ctxt, es_base(ctxt, ops), VCPU_REGS_RDI,
+				&c->dst);
 
 	if (c->rep_prefix && (c->d & String)) {
 		struct read_cache *rc = &ctxt->decode.io_read;
@@ -2981,11 +3061,12 @@ writeback:
 		    (rc->end != 0 && rc->end == rc->pos))
 			ctxt->restart = false;
 	}
-
-	/* Commit shadow register state. */
-	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
-	kvm_rip_write(ctxt->vcpu, c->eip);
-	ops->set_rflags(ctxt->vcpu, ctxt->eflags);
+	/*
+	 * reset read cache here in case string instruction is restared
+	 * without decoding
+	 */
+	ctxt->decode.mem_read.end = 0;
+	ctxt->eip = c->eip;
 
 done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
@@ -3051,7 +3132,7 @@ twobyte_insn:
 			c->dst.type = OP_NONE;
 			break;
 		case 5: /* not defined */
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			emulate_ud(ctxt);
 			goto done;
 		case 7: /* invlpg*/
 			emulate_invlpg(ctxt->vcpu, c->modrm_ea);
@@ -3063,7 +3144,7 @@ twobyte_insn:
 		}
 		break;
 	case 0x05: 		/* syscall */
-		rc = emulate_syscall(ctxt);
+		rc = emulate_syscall(ctxt, ops);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		else
@@ -3073,8 +3154,11 @@ twobyte_insn:
 		emulate_clts(ctxt->vcpu);
 		c->dst.type = OP_NONE;
 		break;
-	case 0x08:		/* invd */
 	case 0x09:		/* wbinvd */
+		kvm_emulate_wbinvd(ctxt->vcpu);
+		c->dst.type = OP_NONE;
+		break;
+	case 0x08:		/* invd */
 	case 0x0d:		/* GrpP (prefetch) */
 	case 0x18:		/* Grp16 (prefetch/nop) */
 		c->dst.type = OP_NONE;
@@ -3084,7 +3168,7 @@ twobyte_insn:
 		case 1:
 		case 5 ... 7:
 		case 9 ... 15:
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			emulate_ud(ctxt);
 			goto done;
 		}
 		c->regs[c->modrm_rm] = ops->get_cr(c->modrm_reg, ctxt->vcpu);
@@ -3093,31 +3177,42 @@ twobyte_insn:
 	case 0x21: /* mov from dr to reg */
 		if ((ops->get_cr(4, ctxt->vcpu) & X86_CR4_DE) &&
 		    (c->modrm_reg == 4 || c->modrm_reg == 5)) {
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			emulate_ud(ctxt);
 			goto done;
 		}
-		emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
+		ops->get_dr(c->modrm_reg, &c->regs[c->modrm_rm], ctxt->vcpu);
 		c->dst.type = OP_NONE;	/* no writeback */
 		break;
 	case 0x22: /* mov reg, cr */
-		ops->set_cr(c->modrm_reg, c->modrm_val, ctxt->vcpu);
+		if (ops->set_cr(c->modrm_reg, c->modrm_val, ctxt->vcpu)) {
+			emulate_gp(ctxt, 0);
+			goto done;
+		}
 		c->dst.type = OP_NONE;
 		break;
 	case 0x23: /* mov from reg to dr */
 		if ((ops->get_cr(4, ctxt->vcpu) & X86_CR4_DE) &&
 		    (c->modrm_reg == 4 || c->modrm_reg == 5)) {
-			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			emulate_ud(ctxt);
+			goto done;
+		}
+
+		if (ops->set_dr(c->modrm_reg, c->regs[c->modrm_rm] &
+				((ctxt->mode == X86EMUL_MODE_PROT64) ?
+				 ~0ULL : ~0U), ctxt->vcpu) < 0) {
+			/* #UD condition is already handled by the code above */
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
-		emulator_set_dr(ctxt, c->modrm_reg, c->regs[c->modrm_rm]);
+
 		c->dst.type = OP_NONE;	/* no writeback */
 		break;
 	case 0x30:
 		/* wrmsr */
 		msr_data = (u32)c->regs[VCPU_REGS_RAX]
 			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
-		if (kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+		if (ops->set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data)) {
+			emulate_gp(ctxt, 0);
 			goto done;
 		}
 		rc = X86EMUL_CONTINUE;
@@ -3125,8 +3220,8 @@ twobyte_insn:
 		break;
 	case 0x32:
 		/* rdmsr */
-		if (kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data)) {
-			kvm_inject_gp(ctxt->vcpu, 0);
+		if (ops->get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data)) {
+			emulate_gp(ctxt, 0);
 			goto done;
 		} else {
 			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
@@ -3136,14 +3231,14 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0x34:		/* sysenter */
-		rc = emulate_sysenter(ctxt);
+		rc = emulate_sysenter(ctxt, ops);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		else
 			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
-		rc = emulate_sysexit(ctxt);
+		rc = emulate_sysexit(ctxt, ops);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		else
@@ -3160,7 +3255,7 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0xa0:	  /* push fs */
-		emulate_push_sreg(ctxt, VCPU_SREG_FS);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_FS);
 		break;
 	case 0xa1:	 /* pop fs */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_FS);
@@ -3179,7 +3274,7 @@ twobyte_insn:
 		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
 		break;
 	case 0xa8:	/* push gs */
-		emulate_push_sreg(ctxt, VCPU_SREG_GS);
+		emulate_push_sreg(ctxt, ops, VCPU_SREG_GS);
 		break;
 	case 0xa9:	/* pop gs */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_GS);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 0150affad25..0fd6378981f 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2006 Intel Corporation
  * Copyright (c) 2007 Keir Fraser, XenSource Inc
  * Copyright (c) 2008 Intel Corporation
+ * Copyright 2009 Red Hat, Inc. and/or its affilates.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -33,6 +34,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 
 #include "irq.h"
 #include "i8254.h"
@@ -243,11 +245,22 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 {
 	struct kvm_kpit_state *ps = container_of(kian, struct kvm_kpit_state,
 						 irq_ack_notifier);
-	raw_spin_lock(&ps->inject_lock);
-	if (atomic_dec_return(&ps->pit_timer.pending) < 0)
+	int value;
+
+	spin_lock(&ps->inject_lock);
+	value = atomic_dec_return(&ps->pit_timer.pending);
+	if (value < 0)
+		/* spurious acks can be generated if, for example, the
+		 * PIC is being reset.  Handle it gracefully here
+		 */
 		atomic_inc(&ps->pit_timer.pending);
+	else if (value > 0)
+		/* in this case, we had multiple outstanding pit interrupts
+		 * that we needed to inject.  Reinject
+		 */
+		queue_work(ps->pit->wq, &ps->pit->expired);
 	ps->irq_ack = 1;
-	raw_spin_unlock(&ps->inject_lock);
+	spin_unlock(&ps->inject_lock);
 }
 
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
@@ -263,10 +276,10 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
-static void destroy_pit_timer(struct kvm_timer *pt)
+static void destroy_pit_timer(struct kvm_pit *pit)
 {
-	pr_debug("execute del timer!\n");
-	hrtimer_cancel(&pt->timer);
+	hrtimer_cancel(&pit->pit_state.pit_timer.timer);
+	cancel_work_sync(&pit->expired);
 }
 
 static bool kpit_is_periodic(struct kvm_timer *ktimer)
@@ -280,6 +293,60 @@ static struct kvm_timer_ops kpit_ops = {
 	.is_periodic = kpit_is_periodic,
 };
 
+static void pit_do_work(struct work_struct *work)
+{
+	struct kvm_pit *pit = container_of(work, struct kvm_pit, expired);
+	struct kvm *kvm = pit->kvm;
+	struct kvm_vcpu *vcpu;
+	int i;
+	struct kvm_kpit_state *ps = &pit->pit_state;
+	int inject = 0;
+
+	/* Try to inject pending interrupts when
+	 * last one has been acked.
+	 */
+	spin_lock(&ps->inject_lock);
+	if (ps->irq_ack) {
+		ps->irq_ack = 0;
+		inject = 1;
+	}
+	spin_unlock(&ps->inject_lock);
+	if (inject) {
+		kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
+		kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
+
+		/*
+		 * Provides NMI watchdog support via Virtual Wire mode.
+		 * The route is: PIT -> PIC -> LVT0 in NMI mode.
+		 *
+		 * Note: Our Virtual Wire implementation is simplified, only
+		 * propagating PIT interrupts to all VCPUs when they have set
+		 * LVT0 to NMI delivery. Other PIC interrupts are just sent to
+		 * VCPU0, and only if its LVT0 is in EXTINT mode.
+		 */
+		if (kvm->arch.vapics_in_nmi_mode > 0)
+			kvm_for_each_vcpu(i, vcpu, kvm)
+				kvm_apic_nmi_wd_deliver(vcpu);
+	}
+}
+
+static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
+{
+	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
+	struct kvm_pit *pt = ktimer->kvm->arch.vpit;
+
+	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+		atomic_inc(&ktimer->pending);
+		queue_work(pt->wq, &pt->expired);
+	}
+
+	if (ktimer->t_ops->is_periodic(ktimer)) {
+		hrtimer_add_expires_ns(&ktimer->timer, ktimer->period);
+		return HRTIMER_RESTART;
+	} else
+		return HRTIMER_NORESTART;
+}
+
 static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 {
 	struct kvm_timer *pt = &ps->pit_timer;
@@ -291,13 +358,13 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&pt->timer);
+	cancel_work_sync(&ps->pit->expired);
 	pt->period = interval;
 	ps->is_periodic = is_period;
 
-	pt->timer.function = kvm_timer_fn;
+	pt->timer.function = pit_timer_fn;
 	pt->t_ops = &kpit_ops;
 	pt->kvm = ps->pit->kvm;
-	pt->vcpu = pt->kvm->bsp_vcpu;
 
 	atomic_set(&pt->pending, 0);
 	ps->irq_ack = 1;
@@ -346,7 +413,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 		}
 		break;
 	default:
-		destroy_pit_timer(&ps->pit_timer);
+		destroy_pit_timer(kvm->arch.vpit);
 	}
 }
 
@@ -625,7 +692,15 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 
 	mutex_init(&pit->pit_state.lock);
 	mutex_lock(&pit->pit_state.lock);
-	raw_spin_lock_init(&pit->pit_state.inject_lock);
+	spin_lock_init(&pit->pit_state.inject_lock);
+
+	pit->wq = create_singlethread_workqueue("kvm-pit-wq");
+	if (!pit->wq) {
+		mutex_unlock(&pit->pit_state.lock);
+		kfree(pit);
+		return NULL;
+	}
+	INIT_WORK(&pit->expired, pit_do_work);
 
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
@@ -677,6 +752,9 @@ void kvm_free_pit(struct kvm *kvm)
 	struct hrtimer *timer;
 
 	if (kvm->arch.vpit) {
+		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &kvm->arch.vpit->dev);
+		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
+					      &kvm->arch.vpit->speaker_dev);
 		kvm_unregister_irq_mask_notifier(kvm, 0,
 					       &kvm->arch.vpit->mask_notifier);
 		kvm_unregister_irq_ack_notifier(kvm,
@@ -684,54 +762,10 @@ void kvm_free_pit(struct kvm *kvm)
 		mutex_lock(&kvm->arch.vpit->pit_state.lock);
 		timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
 		hrtimer_cancel(timer);
+		cancel_work_sync(&kvm->arch.vpit->expired);
 		kvm_free_irq_source_id(kvm, kvm->arch.vpit->irq_source_id);
 		mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+		destroy_workqueue(kvm->arch.vpit->wq);
 		kfree(kvm->arch.vpit);
 	}
 }
-
-static void __inject_pit_timer_intr(struct kvm *kvm)
-{
-	struct kvm_vcpu *vcpu;
-	int i;
-
-	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
-	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
-
-	/*
-	 * Provides NMI watchdog support via Virtual Wire mode.
-	 * The route is: PIT -> PIC -> LVT0 in NMI mode.
-	 *
-	 * Note: Our Virtual Wire implementation is simplified, only
-	 * propagating PIT interrupts to all VCPUs when they have set
-	 * LVT0 to NMI delivery. Other PIC interrupts are just sent to
-	 * VCPU0, and only if its LVT0 is in EXTINT mode.
-	 */
-	if (kvm->arch.vapics_in_nmi_mode > 0)
-		kvm_for_each_vcpu(i, vcpu, kvm)
-			kvm_apic_nmi_wd_deliver(vcpu);
-}
-
-void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
-{
-	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
-	struct kvm *kvm = vcpu->kvm;
-	struct kvm_kpit_state *ps;
-
-	if (pit) {
-		int inject = 0;
-		ps = &pit->pit_state;
-
-		/* Try to inject pending interrupts when
-		 * last one has been acked.
-		 */
-		raw_spin_lock(&ps->inject_lock);
-		if (atomic_read(&ps->pit_timer.pending) && ps->irq_ack) {
-			ps->irq_ack = 0;
-			inject = 1;
-		}
-		raw_spin_unlock(&ps->inject_lock);
-		if (inject)
-			__inject_pit_timer_intr(kvm);
-	}
-}
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index 900d6b0ba7c..46d08ca0b48 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -27,7 +27,7 @@ struct kvm_kpit_state {
 	u32    speaker_data_on;
 	struct mutex lock;
 	struct kvm_pit *pit;
-	raw_spinlock_t inject_lock;
+	spinlock_t inject_lock;
 	unsigned long irq_ack;
 	struct kvm_irq_ack_notifier irq_ack_notifier;
 };
@@ -40,6 +40,8 @@ struct kvm_pit {
 	struct kvm_kpit_state pit_state;
 	int irq_source_id;
 	struct kvm_irq_mask_notifier mask_notifier;
+	struct workqueue_struct *wq;
+	struct work_struct expired;
 };
 
 #define KVM_PIT_BASE_ADDRESS	    0x40
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 93825ff3338..8d10c063d7f 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -3,6 +3,7 @@
  *
  * Copyright (c) 2003-2004 Fabrice Bellard
  * Copyright (c) 2007 Intel Corporation
+ * Copyright 2009 Red Hat, Inc. and/or its affilates.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -33,6 +34,8 @@
 #include <linux/kvm_host.h>
 #include "trace.h"
 
+static void pic_irq_request(struct kvm *kvm, int level);
+
 static void pic_lock(struct kvm_pic *s)
 	__acquires(&s->lock)
 {
@@ -43,16 +46,25 @@ static void pic_unlock(struct kvm_pic *s)
 	__releases(&s->lock)
 {
 	bool wakeup = s->wakeup_needed;
-	struct kvm_vcpu *vcpu;
+	struct kvm_vcpu *vcpu, *found = NULL;
+	int i;
 
 	s->wakeup_needed = false;
 
 	raw_spin_unlock(&s->lock);
 
 	if (wakeup) {
-		vcpu = s->kvm->bsp_vcpu;
-		if (vcpu)
-			kvm_vcpu_kick(vcpu);
+		kvm_for_each_vcpu(i, vcpu, s->kvm) {
+			if (kvm_apic_accept_pic_intr(vcpu)) {
+				found = vcpu;
+				break;
+			}
+		}
+
+		if (!found)
+			found = s->kvm->bsp_vcpu;
+
+		kvm_vcpu_kick(found);
 	}
 }
 
@@ -173,10 +185,7 @@ static void pic_update_irq(struct kvm_pic *s)
 		pic_set_irq1(&s->pics[0], 2, 0);
 	}
 	irq = pic_get_irq(&s->pics[0]);
-	if (irq >= 0)
-		s->irq_request(s->irq_request_opaque, 1);
-	else
-		s->irq_request(s->irq_request_opaque, 0);
+	pic_irq_request(s->kvm, irq >= 0);
 }
 
 void kvm_pic_update_irq(struct kvm_pic *s)
@@ -261,8 +270,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 void kvm_pic_reset(struct kvm_kpic_state *s)
 {
 	int irq;
-	struct kvm *kvm = s->pics_state->irq_request_opaque;
-	struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
+	struct kvm_vcpu *vcpu0 = s->pics_state->kvm->bsp_vcpu;
 	u8 irr = s->irr, isr = s->imr;
 
 	s->last_irr = 0;
@@ -301,8 +309,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 			/*
 			 * deassert a pending interrupt
 			 */
-			s->pics_state->irq_request(s->pics_state->
-						   irq_request_opaque, 0);
+			pic_irq_request(s->pics_state->kvm, 0);
 			s->init_state = 1;
 			s->init4 = val & 1;
 			if (val & 0x02)
@@ -356,10 +363,20 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 		}
 	} else
 		switch (s->init_state) {
-		case 0:		/* normal mode */
+		case 0: { /* normal mode */
+			u8 imr_diff = s->imr ^ val,
+				off = (s == &s->pics_state->pics[0]) ? 0 : 8;
 			s->imr = val;
+			for (irq = 0; irq < PIC_NUM_PINS/2; irq++)
+				if (imr_diff & (1 << irq))
+					kvm_fire_mask_notifiers(
+						s->pics_state->kvm,
+						SELECT_PIC(irq + off),
+						irq + off,
+						!!(s->imr & (1 << irq)));
 			pic_update_irq(s->pics_state);
 			break;
+		}
 		case 1:
 			s->irq_base = val & 0xf8;
 			s->init_state = 2;
@@ -518,9 +535,8 @@ static int picdev_read(struct kvm_io_device *this,
 /*
  * callback when PIC0 irq status changed
  */
-static void pic_irq_request(void *opaque, int level)
+static void pic_irq_request(struct kvm *kvm, int level)
 {
-	struct kvm *kvm = opaque;
 	struct kvm_vcpu *vcpu = kvm->bsp_vcpu;
 	struct kvm_pic *s = pic_irqchip(kvm);
 	int irq = pic_get_irq(&s->pics[0]);
@@ -549,8 +565,6 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	s->kvm = kvm;
 	s->pics[0].elcr_mask = 0xf8;
 	s->pics[1].elcr_mask = 0xde;
-	s->irq_request = pic_irq_request;
-	s->irq_request_opaque = kvm;
 	s->pics[0].pics_state = s;
 	s->pics[1].pics_state = s;
 
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index 96dfbb6ad2a..2095a049835 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -1,6 +1,7 @@
 /*
  * irq.c: API for in kernel interrupt controller
  * Copyright (c) 2007, Intel Corporation.
+ * Copyright 2009 Red Hat, Inc. and/or its affilates.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -89,7 +90,6 @@ EXPORT_SYMBOL_GPL(kvm_cpu_get_interrupt);
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu)
 {
 	kvm_inject_apic_timer_irqs(vcpu);
-	kvm_inject_pit_timer_irqs(vcpu);
 	/* TODO: PIT, RTC etc. */
 }
 EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index cd1f362f413..ffed06871c5 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -38,8 +38,6 @@
 struct kvm;
 struct kvm_vcpu;
 
-typedef void irq_request_func(void *opaque, int level);
-
 struct kvm_kpic_state {
 	u8 last_irr;	/* edge detection */
 	u8 irr;		/* interrupt request register */
@@ -67,8 +65,6 @@ struct kvm_pic {
 	unsigned pending_acks;
 	struct kvm *kvm;
 	struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
-	irq_request_func *irq_request;
-	void *irq_request_opaque;
 	int output;		/* intr from master PIC */
 	struct kvm_io_device dev;
 	void (*ack_notifier)(void *opaque, int irq);
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index cff851cf532..6491ac8e755 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -36,6 +36,8 @@ static inline void kvm_rip_write(struct kvm_vcpu *vcpu, unsigned long val)
 
 static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
 {
+	might_sleep();  /* on svm */
+
 	if (!test_bit(VCPU_EXREG_PDPTR,
 		      (unsigned long *)&vcpu->arch.regs_avail))
 		kvm_x86_ops->cache_reg(vcpu, VCPU_EXREG_PDPTR);
@@ -69,4 +71,10 @@ static inline ulong kvm_read_cr4(struct kvm_vcpu *vcpu)
 	return kvm_read_cr4_bits(vcpu, ~0UL);
 }
 
+static inline u64 kvm_read_edx_eax(struct kvm_vcpu *vcpu)
+{
+	return (kvm_register_read(vcpu, VCPU_REGS_RAX) & -1u)
+		| ((u64)(kvm_register_read(vcpu, VCPU_REGS_RDX) & -1u) << 32);
+}
+
 #endif
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 1eb7a4ae0c9..77d8c0f4817 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2006 Qumranet, Inc.
  * Copyright (C) 2007 Novell
  * Copyright (C) 2007 Intel
+ * Copyright 2009 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Dor Laor <dor.laor@qumranet.com>
@@ -328,7 +329,7 @@ int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
 		   "dest_mode 0x%x, short_hand 0x%x\n",
 		   target, source, dest, dest_mode, short_hand);
 
-	ASSERT(!target);
+	ASSERT(target);
 	switch (short_hand) {
 	case APIC_DEST_NOSHORT:
 		if (dest_mode == 0)
@@ -533,7 +534,7 @@ static void __report_tpr_access(struct kvm_lapic *apic, bool write)
 	struct kvm_vcpu *vcpu = apic->vcpu;
 	struct kvm_run *run = vcpu->run;
 
-	set_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests);
+	kvm_make_request(KVM_REQ_REPORT_TPR_ACCESS, vcpu);
 	run->tpr_access.rip = kvm_rip_read(vcpu);
 	run->tpr_access.is_write = write;
 }
@@ -1106,13 +1107,11 @@ int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
 	u32 lvt0 = apic_get_reg(vcpu->arch.apic, APIC_LVT0);
 	int r = 0;
 
-	if (kvm_vcpu_is_bsp(vcpu)) {
-		if (!apic_hw_enabled(vcpu->arch.apic))
-			r = 1;
-		if ((lvt0 & APIC_LVT_MASKED) == 0 &&
-		    GET_APIC_DELIVERY_MODE(lvt0) == APIC_MODE_EXTINT)
-			r = 1;
-	}
+	if (!apic_hw_enabled(vcpu->arch.apic))
+		r = 1;
+	if ((lvt0 & APIC_LVT_MASKED) == 0 &&
+	    GET_APIC_DELIVERY_MODE(lvt0) == APIC_MODE_EXTINT)
+		r = 1;
 	return r;
 }
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 81563e76e28..0dcc95e0987 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -7,6 +7,7 @@
  * MMU support
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Yaniv Kamay  <yaniv@qumranet.com>
@@ -32,6 +33,7 @@
 #include <linux/compiler.h>
 #include <linux/srcu.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/page.h>
 #include <asm/cmpxchg.h>
@@ -90,8 +92,6 @@ module_param(oos_shadow, bool, 0644);
 #define PT_FIRST_AVAIL_BITS_SHIFT 9
 #define PT64_SECOND_AVAIL_BITS_SHIFT 52
 
-#define VALID_PAGE(x) ((x) != INVALID_PAGE)
-
 #define PT64_LEVEL_BITS 9
 
 #define PT64_LEVEL_SHIFT(level) \
@@ -173,7 +173,7 @@ struct kvm_shadow_walk_iterator {
 	     shadow_walk_okay(&(_walker));			\
 	     shadow_walk_next(&(_walker)))
 
-typedef int (*mmu_parent_walk_fn) (struct kvm_mmu_page *sp);
+typedef void (*mmu_parent_walk_fn) (struct kvm_mmu_page *sp, u64 *spte);
 
 static struct kmem_cache *pte_chain_cache;
 static struct kmem_cache *rmap_desc_cache;
@@ -288,6 +288,35 @@ static void __set_spte(u64 *sptep, u64 spte)
 #endif
 }
 
+static u64 __xchg_spte(u64 *sptep, u64 new_spte)
+{
+#ifdef CONFIG_X86_64
+	return xchg(sptep, new_spte);
+#else
+	u64 old_spte;
+
+	do {
+		old_spte = *sptep;
+	} while (cmpxchg64(sptep, old_spte, new_spte) != old_spte);
+
+	return old_spte;
+#endif
+}
+
+static void update_spte(u64 *sptep, u64 new_spte)
+{
+	u64 old_spte;
+
+	if (!shadow_accessed_mask || (new_spte & shadow_accessed_mask) ||
+	      !is_rmap_spte(*sptep))
+		__set_spte(sptep, new_spte);
+	else {
+		old_spte = __xchg_spte(sptep, new_spte);
+		if (old_spte & shadow_accessed_mask)
+			mark_page_accessed(pfn_to_page(spte_to_pfn(old_spte)));
+	}
+}
+
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
 				  struct kmem_cache *base_cache, int min)
 {
@@ -304,10 +333,11 @@ static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
 	return 0;
 }
 
-static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc)
+static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc,
+				  struct kmem_cache *cache)
 {
 	while (mc->nobjs)
-		kfree(mc->objects[--mc->nobjs]);
+		kmem_cache_free(cache, mc->objects[--mc->nobjs]);
 }
 
 static int mmu_topup_memory_cache_page(struct kvm_mmu_memory_cache *cache,
@@ -355,10 +385,11 @@ out:
 
 static void mmu_free_memory_caches(struct kvm_vcpu *vcpu)
 {
-	mmu_free_memory_cache(&vcpu->arch.mmu_pte_chain_cache);
-	mmu_free_memory_cache(&vcpu->arch.mmu_rmap_desc_cache);
+	mmu_free_memory_cache(&vcpu->arch.mmu_pte_chain_cache, pte_chain_cache);
+	mmu_free_memory_cache(&vcpu->arch.mmu_rmap_desc_cache, rmap_desc_cache);
 	mmu_free_memory_cache_page(&vcpu->arch.mmu_page_cache);
-	mmu_free_memory_cache(&vcpu->arch.mmu_page_header_cache);
+	mmu_free_memory_cache(&vcpu->arch.mmu_page_header_cache,
+				mmu_page_header_cache);
 }
 
 static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc,
@@ -379,7 +410,7 @@ static struct kvm_pte_chain *mmu_alloc_pte_chain(struct kvm_vcpu *vcpu)
 
 static void mmu_free_pte_chain(struct kvm_pte_chain *pc)
 {
-	kfree(pc);
+	kmem_cache_free(pte_chain_cache, pc);
 }
 
 static struct kvm_rmap_desc *mmu_alloc_rmap_desc(struct kvm_vcpu *vcpu)
@@ -390,7 +421,23 @@ static struct kvm_rmap_desc *mmu_alloc_rmap_desc(struct kvm_vcpu *vcpu)
 
 static void mmu_free_rmap_desc(struct kvm_rmap_desc *rd)
 {
-	kfree(rd);
+	kmem_cache_free(rmap_desc_cache, rd);
+}
+
+static gfn_t kvm_mmu_page_get_gfn(struct kvm_mmu_page *sp, int index)
+{
+	if (!sp->role.direct)
+		return sp->gfns[index];
+
+	return sp->gfn + (index << ((sp->role.level - 1) * PT64_LEVEL_BITS));
+}
+
+static void kvm_mmu_page_set_gfn(struct kvm_mmu_page *sp, int index, gfn_t gfn)
+{
+	if (sp->role.direct)
+		BUG_ON(gfn != kvm_mmu_page_get_gfn(sp, index));
+	else
+		sp->gfns[index] = gfn;
 }
 
 /*
@@ -403,8 +450,8 @@ static int *slot_largepage_idx(gfn_t gfn,
 {
 	unsigned long idx;
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
+	idx = (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
+	      (slot->base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
 	return &slot->lpage_info[level - 2][idx].write_count;
 }
 
@@ -414,9 +461,7 @@ static void account_shadowed(struct kvm *kvm, gfn_t gfn)
 	int *write_count;
 	int i;
 
-	gfn = unalias_gfn(kvm, gfn);
-
-	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	slot = gfn_to_memslot(kvm, gfn);
 	for (i = PT_DIRECTORY_LEVEL;
 	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
 		write_count   = slot_largepage_idx(gfn, slot, i);
@@ -430,8 +475,7 @@ static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
 	int *write_count;
 	int i;
 
-	gfn = unalias_gfn(kvm, gfn);
-	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	slot = gfn_to_memslot(kvm, gfn);
 	for (i = PT_DIRECTORY_LEVEL;
 	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
 		write_count   = slot_largepage_idx(gfn, slot, i);
@@ -447,8 +491,7 @@ static int has_wrprotected_page(struct kvm *kvm,
 	struct kvm_memory_slot *slot;
 	int *largepage_idx;
 
-	gfn = unalias_gfn(kvm, gfn);
-	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	slot = gfn_to_memslot(kvm, gfn);
 	if (slot) {
 		largepage_idx = slot_largepage_idx(gfn, slot, level);
 		return *largepage_idx;
@@ -501,7 +544,6 @@ static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
 
 /*
  * Take gfn and return the reverse mapping to it.
- * Note: gfn must be unaliased before this function get called
  */
 
 static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level)
@@ -513,8 +555,8 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level)
 	if (likely(level == PT_PAGE_TABLE_LEVEL))
 		return &slot->rmap[gfn - slot->base_gfn];
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
-		(slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
+	idx = (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
+		(slot->base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
 
 	return &slot->lpage_info[level - 2][idx].rmap_pde;
 }
@@ -541,9 +583,8 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 
 	if (!is_rmap_spte(*spte))
 		return count;
-	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
-	sp->gfns[spte - sp->spt] = gfn;
+	kvm_mmu_page_set_gfn(sp, spte - sp->spt, gfn);
 	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 	if (!*rmapp) {
 		rmap_printk("rmap_add: %p %llx 0->1\n", spte, *spte);
@@ -600,19 +641,13 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	struct kvm_rmap_desc *desc;
 	struct kvm_rmap_desc *prev_desc;
 	struct kvm_mmu_page *sp;
-	pfn_t pfn;
+	gfn_t gfn;
 	unsigned long *rmapp;
 	int i;
 
-	if (!is_rmap_spte(*spte))
-		return;
 	sp = page_header(__pa(spte));
-	pfn = spte_to_pfn(*spte);
-	if (*spte & shadow_accessed_mask)
-		kvm_set_pfn_accessed(pfn);
-	if (is_writable_pte(*spte))
-		kvm_set_pfn_dirty(pfn);
-	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
+	gfn = kvm_mmu_page_get_gfn(sp, spte - sp->spt);
+	rmapp = gfn_to_rmap(kvm, gfn, sp->role.level);
 	if (!*rmapp) {
 		printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
 		BUG();
@@ -644,6 +679,32 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	}
 }
 
+static void set_spte_track_bits(u64 *sptep, u64 new_spte)
+{
+	pfn_t pfn;
+	u64 old_spte = *sptep;
+
+	if (!shadow_accessed_mask || !is_shadow_present_pte(old_spte) ||
+	      old_spte & shadow_accessed_mask) {
+		__set_spte(sptep, new_spte);
+	} else
+		old_spte = __xchg_spte(sptep, new_spte);
+
+	if (!is_rmap_spte(old_spte))
+		return;
+	pfn = spte_to_pfn(old_spte);
+	if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
+		kvm_set_pfn_accessed(pfn);
+	if (is_writable_pte(old_spte))
+		kvm_set_pfn_dirty(pfn);
+}
+
+static void drop_spte(struct kvm *kvm, u64 *sptep, u64 new_spte)
+{
+	set_spte_track_bits(sptep, new_spte);
+	rmap_remove(kvm, sptep);
+}
+
 static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
 {
 	struct kvm_rmap_desc *desc;
@@ -676,7 +737,6 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 	u64 *spte;
 	int i, write_protected = 0;
 
-	gfn = unalias_gfn(kvm, gfn);
 	rmapp = gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL);
 
 	spte = rmap_next(kvm, rmapp, NULL);
@@ -685,7 +745,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
 		if (is_writable_pte(*spte)) {
-			__set_spte(spte, *spte & ~PT_WRITABLE_MASK);
+			update_spte(spte, *spte & ~PT_WRITABLE_MASK);
 			write_protected = 1;
 		}
 		spte = rmap_next(kvm, rmapp, spte);
@@ -709,9 +769,9 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 			BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
 			pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
 			if (is_writable_pte(*spte)) {
-				rmap_remove(kvm, spte);
+				drop_spte(kvm, spte,
+					  shadow_trap_nonpresent_pte);
 				--kvm->stat.lpages;
-				__set_spte(spte, shadow_trap_nonpresent_pte);
 				spte = NULL;
 				write_protected = 1;
 			}
@@ -731,8 +791,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	while ((spte = rmap_next(kvm, rmapp, NULL))) {
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
-		rmap_remove(kvm, spte);
-		__set_spte(spte, shadow_trap_nonpresent_pte);
+		drop_spte(kvm, spte, shadow_trap_nonpresent_pte);
 		need_tlb_flush = 1;
 	}
 	return need_tlb_flush;
@@ -754,8 +813,7 @@ static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
 		rmap_printk("kvm_set_pte_rmapp: spte %p %llx\n", spte, *spte);
 		need_flush = 1;
 		if (pte_write(*ptep)) {
-			rmap_remove(kvm, spte);
-			__set_spte(spte, shadow_trap_nonpresent_pte);
+			drop_spte(kvm, spte, shadow_trap_nonpresent_pte);
 			spte = rmap_next(kvm, rmapp, NULL);
 		} else {
 			new_spte = *spte &~ (PT64_BASE_ADDR_MASK);
@@ -763,9 +821,8 @@ static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
 
 			new_spte &= ~PT_WRITABLE_MASK;
 			new_spte &= ~SPTE_HOST_WRITEABLE;
-			if (is_writable_pte(*spte))
-				kvm_set_pfn_dirty(spte_to_pfn(*spte));
-			__set_spte(spte, new_spte);
+			new_spte &= ~shadow_accessed_mask;
+			set_spte_track_bits(spte, new_spte);
 			spte = rmap_next(kvm, rmapp, spte);
 		}
 	}
@@ -799,8 +856,12 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 			ret = handler(kvm, &memslot->rmap[gfn_offset], data);
 
 			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
-				int idx = gfn_offset;
-				idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
+				unsigned long idx;
+				int sh;
+
+				sh = KVM_HPAGE_GFN_SHIFT(PT_DIRECTORY_LEVEL+j);
+				idx = ((memslot->base_gfn+gfn_offset) >> sh) -
+					(memslot->base_gfn >> sh);
 				ret |= handler(kvm,
 					&memslot->lpage_info[j][idx].rmap_pde,
 					data);
@@ -863,7 +924,6 @@ static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 
 	sp = page_header(__pa(spte));
 
-	gfn = unalias_gfn(vcpu->kvm, gfn);
 	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
 	kvm_unmap_rmapp(vcpu->kvm, rmapp, 0);
@@ -894,10 +954,12 @@ static int is_empty_shadow_page(u64 *spt)
 static void kvm_mmu_free_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	ASSERT(is_empty_shadow_page(sp->spt));
+	hlist_del(&sp->hash_link);
 	list_del(&sp->link);
 	__free_page(virt_to_page(sp->spt));
-	__free_page(virt_to_page(sp->gfns));
-	kfree(sp);
+	if (!sp->role.direct)
+		__free_page(virt_to_page(sp->gfns));
+	kmem_cache_free(mmu_page_header_cache, sp);
 	++kvm->arch.n_free_mmu_pages;
 }
 
@@ -907,13 +969,15 @@ static unsigned kvm_page_table_hashfn(gfn_t gfn)
 }
 
 static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
-					       u64 *parent_pte)
+					       u64 *parent_pte, int direct)
 {
 	struct kvm_mmu_page *sp;
 
 	sp = mmu_memory_cache_alloc(&vcpu->arch.mmu_page_header_cache, sizeof *sp);
 	sp->spt = mmu_memory_cache_alloc(&vcpu->arch.mmu_page_cache, PAGE_SIZE);
-	sp->gfns = mmu_memory_cache_alloc(&vcpu->arch.mmu_page_cache, PAGE_SIZE);
+	if (!direct)
+		sp->gfns = mmu_memory_cache_alloc(&vcpu->arch.mmu_page_cache,
+						  PAGE_SIZE);
 	set_page_private(virt_to_page(sp->spt), (unsigned long)sp);
 	list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages);
 	bitmap_zero(sp->slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS);
@@ -998,7 +1062,6 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 	BUG();
 }
 
-
 static void mmu_parent_walk(struct kvm_mmu_page *sp, mmu_parent_walk_fn fn)
 {
 	struct kvm_pte_chain *pte_chain;
@@ -1008,63 +1071,37 @@ static void mmu_parent_walk(struct kvm_mmu_page *sp, mmu_parent_walk_fn fn)
 
 	if (!sp->multimapped && sp->parent_pte) {
 		parent_sp = page_header(__pa(sp->parent_pte));
-		fn(parent_sp);
-		mmu_parent_walk(parent_sp, fn);
+		fn(parent_sp, sp->parent_pte);
 		return;
 	}
+
 	hlist_for_each_entry(pte_chain, node, &sp->parent_ptes, link)
 		for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i) {
-			if (!pte_chain->parent_ptes[i])
+			u64 *spte = pte_chain->parent_ptes[i];
+
+			if (!spte)
 				break;
-			parent_sp = page_header(__pa(pte_chain->parent_ptes[i]));
-			fn(parent_sp);
-			mmu_parent_walk(parent_sp, fn);
+			parent_sp = page_header(__pa(spte));
+			fn(parent_sp, spte);
 		}
 }
 
-static void kvm_mmu_update_unsync_bitmap(u64 *spte)
+static void mark_unsync(struct kvm_mmu_page *sp, u64 *spte);
+static void kvm_mmu_mark_parents_unsync(struct kvm_mmu_page *sp)
 {
-	unsigned int index;
-	struct kvm_mmu_page *sp = page_header(__pa(spte));
-
-	index = spte - sp->spt;
-	if (!__test_and_set_bit(index, sp->unsync_child_bitmap))
-		sp->unsync_children++;
-	WARN_ON(!sp->unsync_children);
+	mmu_parent_walk(sp, mark_unsync);
 }
 
-static void kvm_mmu_update_parents_unsync(struct kvm_mmu_page *sp)
+static void mark_unsync(struct kvm_mmu_page *sp, u64 *spte)
 {
-	struct kvm_pte_chain *pte_chain;
-	struct hlist_node *node;
-	int i;
+	unsigned int index;
 
-	if (!sp->parent_pte)
+	index = spte - sp->spt;
+	if (__test_and_set_bit(index, sp->unsync_child_bitmap))
 		return;
-
-	if (!sp->multimapped) {
-		kvm_mmu_update_unsync_bitmap(sp->parent_pte);
+	if (sp->unsync_children++)
 		return;
-	}
-
-	hlist_for_each_entry(pte_chain, node, &sp->parent_ptes, link)
-		for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i) {
-			if (!pte_chain->parent_ptes[i])
-				break;
-			kvm_mmu_update_unsync_bitmap(pte_chain->parent_ptes[i]);
-		}
-}
-
-static int unsync_walk_fn(struct kvm_mmu_page *sp)
-{
-	kvm_mmu_update_parents_unsync(sp);
-	return 1;
-}
-
-static void kvm_mmu_mark_parents_unsync(struct kvm_mmu_page *sp)
-{
-	mmu_parent_walk(sp, unsync_walk_fn);
-	kvm_mmu_update_parents_unsync(sp);
+	kvm_mmu_mark_parents_unsync(sp);
 }
 
 static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
@@ -1077,7 +1114,7 @@ static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
 }
 
 static int nonpaging_sync_page(struct kvm_vcpu *vcpu,
-			       struct kvm_mmu_page *sp)
+			       struct kvm_mmu_page *sp, bool clear_unsync)
 {
 	return 1;
 }
@@ -1123,35 +1160,40 @@ static int __mmu_unsync_walk(struct kvm_mmu_page *sp,
 	int i, ret, nr_unsync_leaf = 0;
 
 	for_each_unsync_children(sp->unsync_child_bitmap, i) {
+		struct kvm_mmu_page *child;
 		u64 ent = sp->spt[i];
 
-		if (is_shadow_present_pte(ent) && !is_large_pte(ent)) {
-			struct kvm_mmu_page *child;
-			child = page_header(ent & PT64_BASE_ADDR_MASK);
-
-			if (child->unsync_children) {
-				if (mmu_pages_add(pvec, child, i))
-					return -ENOSPC;
-
-				ret = __mmu_unsync_walk(child, pvec);
-				if (!ret)
-					__clear_bit(i, sp->unsync_child_bitmap);
-				else if (ret > 0)
-					nr_unsync_leaf += ret;
-				else
-					return ret;
-			}
+		if (!is_shadow_present_pte(ent) || is_large_pte(ent))
+			goto clear_child_bitmap;
+
+		child = page_header(ent & PT64_BASE_ADDR_MASK);
+
+		if (child->unsync_children) {
+			if (mmu_pages_add(pvec, child, i))
+				return -ENOSPC;
+
+			ret = __mmu_unsync_walk(child, pvec);
+			if (!ret)
+				goto clear_child_bitmap;
+			else if (ret > 0)
+				nr_unsync_leaf += ret;
+			else
+				return ret;
+		} else if (child->unsync) {
+			nr_unsync_leaf++;
+			if (mmu_pages_add(pvec, child, i))
+				return -ENOSPC;
+		} else
+			 goto clear_child_bitmap;
 
-			if (child->unsync) {
-				nr_unsync_leaf++;
-				if (mmu_pages_add(pvec, child, i))
-					return -ENOSPC;
-			}
-		}
+		continue;
+
+clear_child_bitmap:
+		__clear_bit(i, sp->unsync_child_bitmap);
+		sp->unsync_children--;
+		WARN_ON((int)sp->unsync_children < 0);
 	}
 
-	if (find_first_bit(sp->unsync_child_bitmap, 512) == 512)
-		sp->unsync_children = 0;
 
 	return nr_unsync_leaf;
 }
@@ -1166,26 +1208,6 @@ static int mmu_unsync_walk(struct kvm_mmu_page *sp,
 	return __mmu_unsync_walk(sp, pvec);
 }
 
-static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
-{
-	unsigned index;
-	struct hlist_head *bucket;
-	struct kvm_mmu_page *sp;
-	struct hlist_node *node;
-
-	pgprintk("%s: looking for gfn %lx\n", __func__, gfn);
-	index = kvm_page_table_hashfn(gfn);
-	bucket = &kvm->arch.mmu_page_hash[index];
-	hlist_for_each_entry(sp, node, bucket, hash_link)
-		if (sp->gfn == gfn && !sp->role.direct
-		    && !sp->role.invalid) {
-			pgprintk("%s: found role %x\n",
-				 __func__, sp->role.word);
-			return sp;
-		}
-	return NULL;
-}
-
 static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	WARN_ON(!sp->unsync);
@@ -1194,20 +1216,36 @@ static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	--kvm->stat.mmu_unsync;
 }
 
-static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp);
+static int kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp,
+				    struct list_head *invalid_list);
+static void kvm_mmu_commit_zap_page(struct kvm *kvm,
+				    struct list_head *invalid_list);
+
+#define for_each_gfn_sp(kvm, sp, gfn, pos)				\
+  hlist_for_each_entry(sp, pos,						\
+   &(kvm)->arch.mmu_page_hash[kvm_page_table_hashfn(gfn)], hash_link)	\
+	if ((sp)->gfn != (gfn)) {} else
 
-static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+#define for_each_gfn_indirect_valid_sp(kvm, sp, gfn, pos)		\
+  hlist_for_each_entry(sp, pos,						\
+   &(kvm)->arch.mmu_page_hash[kvm_page_table_hashfn(gfn)], hash_link)	\
+		if ((sp)->gfn != (gfn) || (sp)->role.direct ||		\
+			(sp)->role.invalid) {} else
+
+/* @sp->gfn should be write-protected at the call site */
+static int __kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+			   struct list_head *invalid_list, bool clear_unsync)
 {
 	if (sp->role.cr4_pae != !!is_pae(vcpu)) {
-		kvm_mmu_zap_page(vcpu->kvm, sp);
+		kvm_mmu_prepare_zap_page(vcpu->kvm, sp, invalid_list);
 		return 1;
 	}
 
-	if (rmap_write_protect(vcpu->kvm, sp->gfn))
-		kvm_flush_remote_tlbs(vcpu->kvm);
-	kvm_unlink_unsync_page(vcpu->kvm, sp);
-	if (vcpu->arch.mmu.sync_page(vcpu, sp)) {
-		kvm_mmu_zap_page(vcpu->kvm, sp);
+	if (clear_unsync)
+		kvm_unlink_unsync_page(vcpu->kvm, sp);
+
+	if (vcpu->arch.mmu.sync_page(vcpu, sp, clear_unsync)) {
+		kvm_mmu_prepare_zap_page(vcpu->kvm, sp, invalid_list);
 		return 1;
 	}
 
@@ -1215,6 +1253,52 @@ static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	return 0;
 }
 
+static int kvm_sync_page_transient(struct kvm_vcpu *vcpu,
+				   struct kvm_mmu_page *sp)
+{
+	LIST_HEAD(invalid_list);
+	int ret;
+
+	ret = __kvm_sync_page(vcpu, sp, &invalid_list, false);
+	if (ret)
+		kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+
+	return ret;
+}
+
+static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+			 struct list_head *invalid_list)
+{
+	return __kvm_sync_page(vcpu, sp, invalid_list, true);
+}
+
+/* @gfn should be write-protected at the call site */
+static void kvm_sync_pages(struct kvm_vcpu *vcpu,  gfn_t gfn)
+{
+	struct kvm_mmu_page *s;
+	struct hlist_node *node;
+	LIST_HEAD(invalid_list);
+	bool flush = false;
+
+	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn, node) {
+		if (!s->unsync)
+			continue;
+
+		WARN_ON(s->role.level != PT_PAGE_TABLE_LEVEL);
+		if ((s->role.cr4_pae != !!is_pae(vcpu)) ||
+			(vcpu->arch.mmu.sync_page(vcpu, s, true))) {
+			kvm_mmu_prepare_zap_page(vcpu->kvm, s, &invalid_list);
+			continue;
+		}
+		kvm_unlink_unsync_page(vcpu->kvm, s);
+		flush = true;
+	}
+
+	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+	if (flush)
+		kvm_mmu_flush_tlb(vcpu);
+}
+
 struct mmu_page_path {
 	struct kvm_mmu_page *parent[PT64_ROOT_LEVEL-1];
 	unsigned int idx[PT64_ROOT_LEVEL-1];
@@ -1281,6 +1365,7 @@ static void mmu_sync_children(struct kvm_vcpu *vcpu,
 	struct kvm_mmu_page *sp;
 	struct mmu_page_path parents;
 	struct kvm_mmu_pages pages;
+	LIST_HEAD(invalid_list);
 
 	kvm_mmu_pages_init(parent, &parents, &pages);
 	while (mmu_unsync_walk(parent, &pages)) {
@@ -1293,9 +1378,10 @@ static void mmu_sync_children(struct kvm_vcpu *vcpu,
 			kvm_flush_remote_tlbs(vcpu->kvm);
 
 		for_each_sp(pages, sp, parents, i) {
-			kvm_sync_page(vcpu, sp);
+			kvm_sync_page(vcpu, sp, &invalid_list);
 			mmu_pages_clear_parents(&parents);
 		}
+		kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
 		cond_resched_lock(&vcpu->kvm->mmu_lock);
 		kvm_mmu_pages_init(parent, &parents, &pages);
 	}
@@ -1310,11 +1396,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     u64 *parent_pte)
 {
 	union kvm_mmu_page_role role;
-	unsigned index;
 	unsigned quadrant;
-	struct hlist_head *bucket;
 	struct kvm_mmu_page *sp;
-	struct hlist_node *node, *tmp;
+	struct hlist_node *node;
+	bool need_sync = false;
 
 	role = vcpu->arch.mmu.base_role;
 	role.level = level;
@@ -1322,40 +1407,45 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	if (role.direct)
 		role.cr4_pae = 0;
 	role.access = access;
-	if (vcpu->arch.mmu.root_level <= PT32_ROOT_LEVEL) {
+	if (!tdp_enabled && vcpu->arch.mmu.root_level <= PT32_ROOT_LEVEL) {
 		quadrant = gaddr >> (PAGE_SHIFT + (PT64_PT_BITS * level));
 		quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
 		role.quadrant = quadrant;
 	}
-	index = kvm_page_table_hashfn(gfn);
-	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
-	hlist_for_each_entry_safe(sp, node, tmp, bucket, hash_link)
-		if (sp->gfn == gfn) {
-			if (sp->unsync)
-				if (kvm_sync_page(vcpu, sp))
-					continue;
+	for_each_gfn_sp(vcpu->kvm, sp, gfn, node) {
+		if (!need_sync && sp->unsync)
+			need_sync = true;
 
-			if (sp->role.word != role.word)
-				continue;
+		if (sp->role.word != role.word)
+			continue;
 
-			mmu_page_add_parent_pte(vcpu, sp, parent_pte);
-			if (sp->unsync_children) {
-				set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
-				kvm_mmu_mark_parents_unsync(sp);
-			}
-			trace_kvm_mmu_get_page(sp, false);
-			return sp;
-		}
+		if (sp->unsync && kvm_sync_page_transient(vcpu, sp))
+			break;
+
+		mmu_page_add_parent_pte(vcpu, sp, parent_pte);
+		if (sp->unsync_children) {
+			kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
+			kvm_mmu_mark_parents_unsync(sp);
+		} else if (sp->unsync)
+			kvm_mmu_mark_parents_unsync(sp);
+
+		trace_kvm_mmu_get_page(sp, false);
+		return sp;
+	}
 	++vcpu->kvm->stat.mmu_cache_miss;
-	sp = kvm_mmu_alloc_page(vcpu, parent_pte);
+	sp = kvm_mmu_alloc_page(vcpu, parent_pte, direct);
 	if (!sp)
 		return sp;
 	sp->gfn = gfn;
 	sp->role = role;
-	hlist_add_head(&sp->hash_link, bucket);
+	hlist_add_head(&sp->hash_link,
+		&vcpu->kvm->arch.mmu_page_hash[kvm_page_table_hashfn(gfn)]);
 	if (!direct) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
 			kvm_flush_remote_tlbs(vcpu->kvm);
+		if (level > PT_PAGE_TABLE_LEVEL && need_sync)
+			kvm_sync_pages(vcpu, gfn);
+
 		account_shadowed(vcpu->kvm, gfn);
 	}
 	if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
@@ -1402,6 +1492,47 @@ static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
 	--iterator->level;
 }
 
+static void link_shadow_page(u64 *sptep, struct kvm_mmu_page *sp)
+{
+	u64 spte;
+
+	spte = __pa(sp->spt)
+		| PT_PRESENT_MASK | PT_ACCESSED_MASK
+		| PT_WRITABLE_MASK | PT_USER_MASK;
+	__set_spte(sptep, spte);
+}
+
+static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep)
+{
+	if (is_large_pte(*sptep)) {
+		drop_spte(vcpu->kvm, sptep, shadow_trap_nonpresent_pte);
+		kvm_flush_remote_tlbs(vcpu->kvm);
+	}
+}
+
+static void validate_direct_spte(struct kvm_vcpu *vcpu, u64 *sptep,
+				   unsigned direct_access)
+{
+	if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep)) {
+		struct kvm_mmu_page *child;
+
+		/*
+		 * For the direct sp, if the guest pte's dirty bit
+		 * changed form clean to dirty, it will corrupt the
+		 * sp's access: allow writable in the read-only sp,
+		 * so we should update the spte at this point to get
+		 * a new sp with the correct access.
+		 */
+		child = page_header(*sptep & PT64_BASE_ADDR_MASK);
+		if (child->role.access == direct_access)
+			return;
+
+		mmu_page_remove_parent_pte(child, sptep);
+		__set_spte(sptep, shadow_trap_nonpresent_pte);
+		kvm_flush_remote_tlbs(vcpu->kvm);
+	}
+}
+
 static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 					 struct kvm_mmu_page *sp)
 {
@@ -1422,7 +1553,8 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 			} else {
 				if (is_large_pte(ent))
 					--kvm->stat.lpages;
-				rmap_remove(kvm, &pt[i]);
+				drop_spte(kvm, &pt[i],
+					  shadow_trap_nonpresent_pte);
 			}
 		}
 		pt[i] = shadow_trap_nonpresent_pte;
@@ -1464,7 +1596,8 @@ static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
 }
 
 static int mmu_zap_unsync_children(struct kvm *kvm,
-				   struct kvm_mmu_page *parent)
+				   struct kvm_mmu_page *parent,
+				   struct list_head *invalid_list)
 {
 	int i, zapped = 0;
 	struct mmu_page_path parents;
@@ -1478,7 +1611,7 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 		struct kvm_mmu_page *sp;
 
 		for_each_sp(pages, sp, parents, i) {
-			kvm_mmu_zap_page(kvm, sp);
+			kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
 			mmu_pages_clear_parents(&parents);
 			zapped++;
 		}
@@ -1488,32 +1621,52 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 	return zapped;
 }
 
-static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
+static int kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp,
+				    struct list_head *invalid_list)
 {
 	int ret;
 
-	trace_kvm_mmu_zap_page(sp);
+	trace_kvm_mmu_prepare_zap_page(sp);
 	++kvm->stat.mmu_shadow_zapped;
-	ret = mmu_zap_unsync_children(kvm, sp);
+	ret = mmu_zap_unsync_children(kvm, sp, invalid_list);
 	kvm_mmu_page_unlink_children(kvm, sp);
 	kvm_mmu_unlink_parents(kvm, sp);
-	kvm_flush_remote_tlbs(kvm);
 	if (!sp->role.invalid && !sp->role.direct)
 		unaccount_shadowed(kvm, sp->gfn);
 	if (sp->unsync)
 		kvm_unlink_unsync_page(kvm, sp);
 	if (!sp->root_count) {
-		hlist_del(&sp->hash_link);
-		kvm_mmu_free_page(kvm, sp);
+		/* Count self */
+		ret++;
+		list_move(&sp->link, invalid_list);
 	} else {
-		sp->role.invalid = 1;
 		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		kvm_reload_remote_mmus(kvm);
 	}
+
+	sp->role.invalid = 1;
 	kvm_mmu_reset_last_pte_updated(kvm);
 	return ret;
 }
 
+static void kvm_mmu_commit_zap_page(struct kvm *kvm,
+				    struct list_head *invalid_list)
+{
+	struct kvm_mmu_page *sp;
+
+	if (list_empty(invalid_list))
+		return;
+
+	kvm_flush_remote_tlbs(kvm);
+
+	do {
+		sp = list_first_entry(invalid_list, struct kvm_mmu_page, link);
+		WARN_ON(!sp->role.invalid || sp->root_count);
+		kvm_mmu_free_page(kvm, sp);
+	} while (!list_empty(invalid_list));
+
+}
+
 /*
  * Changing the number of mmu pages allocated to the vm
  * Note: if kvm_nr_mmu_pages is too small, you will get dead lock
@@ -1521,6 +1674,7 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 {
 	int used_pages;
+	LIST_HEAD(invalid_list);
 
 	used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
 	used_pages = max(0, used_pages);
@@ -1538,9 +1692,10 @@ void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 
 			page = container_of(kvm->arch.active_mmu_pages.prev,
 					    struct kvm_mmu_page, link);
-			used_pages -= kvm_mmu_zap_page(kvm, page);
-			used_pages--;
+			used_pages -= kvm_mmu_prepare_zap_page(kvm, page,
+							       &invalid_list);
 		}
+		kvm_mmu_commit_zap_page(kvm, &invalid_list);
 		kvm_nr_mmu_pages = used_pages;
 		kvm->arch.n_free_mmu_pages = 0;
 	}
@@ -1553,47 +1708,36 @@ void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 
 static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 {
-	unsigned index;
-	struct hlist_head *bucket;
 	struct kvm_mmu_page *sp;
-	struct hlist_node *node, *n;
+	struct hlist_node *node;
+	LIST_HEAD(invalid_list);
 	int r;
 
 	pgprintk("%s: looking for gfn %lx\n", __func__, gfn);
 	r = 0;
-	index = kvm_page_table_hashfn(gfn);
-	bucket = &kvm->arch.mmu_page_hash[index];
-restart:
-	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link)
-		if (sp->gfn == gfn && !sp->role.direct) {
-			pgprintk("%s: gfn %lx role %x\n", __func__, gfn,
-				 sp->role.word);
-			r = 1;
-			if (kvm_mmu_zap_page(kvm, sp))
-				goto restart;
-		}
+
+	for_each_gfn_indirect_valid_sp(kvm, sp, gfn, node) {
+		pgprintk("%s: gfn %lx role %x\n", __func__, gfn,
+			 sp->role.word);
+		r = 1;
+		kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list);
+	}
+	kvm_mmu_commit_zap_page(kvm, &invalid_list);
 	return r;
 }
 
 static void mmu_unshadow(struct kvm *kvm, gfn_t gfn)
 {
-	unsigned index;
-	struct hlist_head *bucket;
 	struct kvm_mmu_page *sp;
-	struct hlist_node *node, *nn;
+	struct hlist_node *node;
+	LIST_HEAD(invalid_list);
 
-	index = kvm_page_table_hashfn(gfn);
-	bucket = &kvm->arch.mmu_page_hash[index];
-restart:
-	hlist_for_each_entry_safe(sp, node, nn, bucket, hash_link) {
-		if (sp->gfn == gfn && !sp->role.direct
-		    && !sp->role.invalid) {
-			pgprintk("%s: zap %lx %x\n",
-				 __func__, gfn, sp->role.word);
-			if (kvm_mmu_zap_page(kvm, sp))
-				goto restart;
-		}
+	for_each_gfn_indirect_valid_sp(kvm, sp, gfn, node) {
+		pgprintk("%s: zap %lx %x\n",
+			 __func__, gfn, sp->role.word);
+		kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list);
 	}
+	kvm_mmu_commit_zap_page(kvm, &invalid_list);
 }
 
 static void page_header_update_slot(struct kvm *kvm, void *pte, gfn_t gfn)
@@ -1723,47 +1867,51 @@ u8 kvm_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn)
 }
 EXPORT_SYMBOL_GPL(kvm_get_guest_memory_type);
 
-static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+static void __kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
-	unsigned index;
-	struct hlist_head *bucket;
-	struct kvm_mmu_page *s;
-	struct hlist_node *node, *n;
-
-	index = kvm_page_table_hashfn(sp->gfn);
-	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
-	/* don't unsync if pagetable is shadowed with multiple roles */
-	hlist_for_each_entry_safe(s, node, n, bucket, hash_link) {
-		if (s->gfn != sp->gfn || s->role.direct)
-			continue;
-		if (s->role.word != sp->role.word)
-			return 1;
-	}
 	trace_kvm_mmu_unsync_page(sp);
 	++vcpu->kvm->stat.mmu_unsync;
 	sp->unsync = 1;
 
 	kvm_mmu_mark_parents_unsync(sp);
-
 	mmu_convert_notrap(sp);
-	return 0;
+}
+
+static void kvm_unsync_pages(struct kvm_vcpu *vcpu,  gfn_t gfn)
+{
+	struct kvm_mmu_page *s;
+	struct hlist_node *node;
+
+	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn, node) {
+		if (s->unsync)
+			continue;
+		WARN_ON(s->role.level != PT_PAGE_TABLE_LEVEL);
+		__kvm_unsync_page(vcpu, s);
+	}
 }
 
 static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 				  bool can_unsync)
 {
-	struct kvm_mmu_page *shadow;
+	struct kvm_mmu_page *s;
+	struct hlist_node *node;
+	bool need_unsync = false;
 
-	shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
-	if (shadow) {
-		if (shadow->role.level != PT_PAGE_TABLE_LEVEL)
+	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn, node) {
+		if (!can_unsync)
 			return 1;
-		if (shadow->unsync)
-			return 0;
-		if (can_unsync && oos_shadow)
-			return kvm_unsync_page(vcpu, shadow);
-		return 1;
+
+		if (s->role.level != PT_PAGE_TABLE_LEVEL)
+			return 1;
+
+		if (!need_unsync && !s->unsync) {
+			if (!oos_shadow)
+				return 1;
+			need_unsync = true;
+		}
 	}
+	if (need_unsync)
+		kvm_unsync_pages(vcpu, gfn);
 	return 0;
 }
 
@@ -1804,17 +1952,21 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	spte |= (u64)pfn << PAGE_SHIFT;
 
 	if ((pte_access & ACC_WRITE_MASK)
-	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
+	    || (!tdp_enabled && write_fault && !is_write_protection(vcpu)
+		&& !user_fault)) {
 
 		if (level > PT_PAGE_TABLE_LEVEL &&
 		    has_wrprotected_page(vcpu->kvm, gfn, level)) {
 			ret = 1;
-			spte = shadow_trap_nonpresent_pte;
-			goto set_pte;
+			drop_spte(vcpu->kvm, sptep, shadow_trap_nonpresent_pte);
+			goto done;
 		}
 
 		spte |= PT_WRITABLE_MASK;
 
+		if (!tdp_enabled && !(pte_access & ACC_WRITE_MASK))
+			spte &= ~PT_USER_MASK;
+
 		/*
 		 * Optimization: for pte sync, if spte was writable the hash
 		 * lookup is unnecessary (and expensive). Write protection
@@ -1838,7 +1990,10 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 set_pte:
-	__set_spte(sptep, spte);
+	if (is_writable_pte(*sptep) && !is_writable_pte(spte))
+		kvm_set_pfn_dirty(pfn);
+	update_spte(sptep, spte);
+done:
 	return ret;
 }
 
@@ -1850,7 +2005,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 bool reset_host_protection)
 {
 	int was_rmapped = 0;
-	int was_writable = is_writable_pte(*sptep);
 	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
@@ -1870,10 +2024,13 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
 			mmu_page_remove_parent_pte(child, sptep);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else if (pfn != spte_to_pfn(*sptep)) {
 			pgprintk("hfn old %lx new %lx\n",
 				 spte_to_pfn(*sptep), pfn);
-			rmap_remove(vcpu->kvm, sptep);
+			drop_spte(vcpu->kvm, sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else
 			was_rmapped = 1;
 	}
@@ -1883,7 +2040,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		      reset_host_protection)) {
 		if (write_fault)
 			*ptwrite = 1;
-		kvm_x86_ops->tlb_flush(vcpu);
+		kvm_mmu_flush_tlb(vcpu);
 	}
 
 	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
@@ -1897,15 +2054,10 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
 		rmap_count = rmap_add(vcpu, sptep, gfn);
-		kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, sptep, gfn);
-	} else {
-		if (was_writable)
-			kvm_release_pfn_dirty(pfn);
-		else
-			kvm_release_pfn_clean(pfn);
 	}
+	kvm_release_pfn_clean(pfn);
 	if (speculative) {
 		vcpu->arch.last_pte_updated = sptep;
 		vcpu->arch.last_pte_gfn = gfn;
@@ -1934,7 +2086,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 		}
 
 		if (*iterator.sptep == shadow_trap_nonpresent_pte) {
-			pseudo_gfn = (iterator.addr & PT64_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+			u64 base_addr = iterator.addr;
+
+			base_addr &= PT64_LVL_ADDR_MASK(iterator.level);
+			pseudo_gfn = base_addr >> PAGE_SHIFT;
 			sp = kvm_mmu_get_page(vcpu, pseudo_gfn, iterator.addr,
 					      iterator.level - 1,
 					      1, ACC_ALL, iterator.sptep);
@@ -1953,6 +2108,29 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 	return pt_write;
 }
 
+static void kvm_send_hwpoison_signal(struct kvm *kvm, gfn_t gfn)
+{
+	char buf[1];
+	void __user *hva;
+	int r;
+
+	/* Touch the page, so send SIGBUS */
+	hva = (void __user *)gfn_to_hva(kvm, gfn);
+	r = copy_from_user(buf, hva, 1);
+}
+
+static int kvm_handle_bad_page(struct kvm *kvm, gfn_t gfn, pfn_t pfn)
+{
+	kvm_release_pfn_clean(pfn);
+	if (is_hwpoison_pfn(pfn)) {
+		kvm_send_hwpoison_signal(kvm, gfn);
+		return 0;
+	} else if (is_fault_pfn(pfn))
+		return -EFAULT;
+
+	return 1;
+}
+
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 {
 	int r;
@@ -1976,10 +2154,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 
 	/* mmio */
-	if (is_error_pfn(pfn)) {
-		kvm_release_pfn_clean(pfn);
-		return 1;
-	}
+	if (is_error_pfn(pfn))
+		return kvm_handle_bad_page(vcpu->kvm, gfn, pfn);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	if (mmu_notifier_retry(vcpu, mmu_seq))
@@ -2002,6 +2178,7 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
 {
 	int i;
 	struct kvm_mmu_page *sp;
+	LIST_HEAD(invalid_list);
 
 	if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
 		return;
@@ -2011,8 +2188,10 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
 
 		sp = page_header(root);
 		--sp->root_count;
-		if (!sp->root_count && sp->role.invalid)
-			kvm_mmu_zap_page(vcpu->kvm, sp);
+		if (!sp->root_count && sp->role.invalid) {
+			kvm_mmu_prepare_zap_page(vcpu->kvm, sp, &invalid_list);
+			kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+		}
 		vcpu->arch.mmu.root_hpa = INVALID_PAGE;
 		spin_unlock(&vcpu->kvm->mmu_lock);
 		return;
@@ -2025,10 +2204,12 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
 			sp = page_header(root);
 			--sp->root_count;
 			if (!sp->root_count && sp->role.invalid)
-				kvm_mmu_zap_page(vcpu->kvm, sp);
+				kvm_mmu_prepare_zap_page(vcpu->kvm, sp,
+							 &invalid_list);
 		}
 		vcpu->arch.mmu.pae_root[i] = INVALID_PAGE;
 	}
+	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	vcpu->arch.mmu.root_hpa = INVALID_PAGE;
 }
@@ -2038,7 +2219,7 @@ static int mmu_check_root(struct kvm_vcpu *vcpu, gfn_t root_gfn)
 	int ret = 0;
 
 	if (!kvm_is_visible_gfn(vcpu->kvm, root_gfn)) {
-		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+		kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 		ret = 1;
 	}
 
@@ -2066,6 +2247,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 			root_gfn = 0;
 		}
 		spin_lock(&vcpu->kvm->mmu_lock);
+		kvm_mmu_free_some_pages(vcpu);
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
 				      PT64_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
@@ -2096,6 +2278,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 			root_gfn = i << 30;
 		}
 		spin_lock(&vcpu->kvm->mmu_lock);
+		kvm_mmu_free_some_pages(vcpu);
 		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
 				      PT32_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
@@ -2191,10 +2374,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
-	if (is_error_pfn(pfn)) {
-		kvm_release_pfn_clean(pfn);
-		return 1;
-	}
+	if (is_error_pfn(pfn))
+		return kvm_handle_bad_page(vcpu->kvm, gfn, pfn);
 	spin_lock(&vcpu->kvm->mmu_lock);
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
@@ -2236,7 +2417,7 @@ static int nonpaging_init_context(struct kvm_vcpu *vcpu)
 void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.tlb_flush;
-	kvm_x86_ops->tlb_flush(vcpu);
+	kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 }
 
 static void paging_new_cr3(struct kvm_vcpu *vcpu)
@@ -2450,10 +2631,9 @@ static int init_kvm_mmu(struct kvm_vcpu *vcpu)
 static void destroy_kvm_mmu(struct kvm_vcpu *vcpu)
 {
 	ASSERT(vcpu);
-	if (VALID_PAGE(vcpu->arch.mmu.root_hpa)) {
+	if (VALID_PAGE(vcpu->arch.mmu.root_hpa))
+		/* mmu.free() should set root_hpa = INVALID_PAGE */
 		vcpu->arch.mmu.free(vcpu);
-		vcpu->arch.mmu.root_hpa = INVALID_PAGE;
-	}
 }
 
 int kvm_mmu_reset_context(struct kvm_vcpu *vcpu)
@@ -2470,9 +2650,6 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	r = mmu_topup_memory_caches(vcpu);
 	if (r)
 		goto out;
-	spin_lock(&vcpu->kvm->mmu_lock);
-	kvm_mmu_free_some_pages(vcpu);
-	spin_unlock(&vcpu->kvm->mmu_lock);
 	r = mmu_alloc_roots(vcpu);
 	spin_lock(&vcpu->kvm->mmu_lock);
 	mmu_sync_roots(vcpu);
@@ -2501,7 +2678,7 @@ static void mmu_pte_write_zap_pte(struct kvm_vcpu *vcpu,
 	pte = *spte;
 	if (is_shadow_present_pte(pte)) {
 		if (is_last_spte(pte, sp->role.level))
-			rmap_remove(vcpu->kvm, spte);
+			drop_spte(vcpu->kvm, spte, shadow_trap_nonpresent_pte);
 		else {
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
 			mmu_page_remove_parent_pte(child, spte);
@@ -2522,6 +2699,9 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
 		return;
         }
 
+	if (is_rsvd_bits_set(vcpu, *(u64 *)new, PT_PAGE_TABLE_LEVEL))
+		return;
+
 	++vcpu->kvm->stat.mmu_pte_updated;
 	if (!sp->role.cr4_pae)
 		paging32_update_pte(vcpu, sp, spte, new);
@@ -2542,11 +2722,15 @@ static bool need_remote_flush(u64 old, u64 new)
 	return (old & ~new & PT64_PERM_MASK) != 0;
 }
 
-static void mmu_pte_write_flush_tlb(struct kvm_vcpu *vcpu, u64 old, u64 new)
+static void mmu_pte_write_flush_tlb(struct kvm_vcpu *vcpu, bool zap_page,
+				    bool remote_flush, bool local_flush)
 {
-	if (need_remote_flush(old, new))
+	if (zap_page)
+		return;
+
+	if (remote_flush)
 		kvm_flush_remote_tlbs(vcpu->kvm);
-	else
+	else if (local_flush)
 		kvm_mmu_flush_tlb(vcpu);
 }
 
@@ -2596,10 +2780,10 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		       bool guest_initiated)
 {
 	gfn_t gfn = gpa >> PAGE_SHIFT;
+	union kvm_mmu_page_role mask = { .word = 0 };
 	struct kvm_mmu_page *sp;
-	struct hlist_node *node, *n;
-	struct hlist_head *bucket;
-	unsigned index;
+	struct hlist_node *node;
+	LIST_HEAD(invalid_list);
 	u64 entry, gentry;
 	u64 *spte;
 	unsigned offset = offset_in_page(gpa);
@@ -2612,6 +2796,9 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	int npte;
 	int r;
 	int invlpg_counter;
+	bool remote_flush, local_flush, zap_page;
+
+	zap_page = remote_flush = local_flush = false;
 
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
 
@@ -2667,13 +2854,9 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 			vcpu->arch.last_pte_updated = NULL;
 		}
 	}
-	index = kvm_page_table_hashfn(gfn);
-	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 
-restart:
-	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link) {
-		if (sp->gfn != gfn || sp->role.direct || sp->role.invalid)
-			continue;
+	mask.cr0_wp = mask.cr4_pae = mask.nxe = 1;
+	for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn, node) {
 		pte_size = sp->role.cr4_pae ? 8 : 4;
 		misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
 		misaligned |= bytes < 4;
@@ -2690,8 +2873,8 @@ restart:
 			 */
 			pgprintk("misaligned: gpa %llx bytes %d role %x\n",
 				 gpa, bytes, sp->role.word);
-			if (kvm_mmu_zap_page(vcpu->kvm, sp))
-				goto restart;
+			zap_page |= !!kvm_mmu_prepare_zap_page(vcpu->kvm, sp,
+						     &invalid_list);
 			++vcpu->kvm->stat.mmu_flooded;
 			continue;
 		}
@@ -2715,16 +2898,22 @@ restart:
 			if (quadrant != sp->role.quadrant)
 				continue;
 		}
+		local_flush = true;
 		spte = &sp->spt[page_offset / sizeof(*spte)];
 		while (npte--) {
 			entry = *spte;
 			mmu_pte_write_zap_pte(vcpu, sp, spte);
-			if (gentry)
+			if (gentry &&
+			      !((sp->role.word ^ vcpu->arch.mmu.base_role.word)
+			      & mask.word))
 				mmu_pte_write_new_pte(vcpu, sp, spte, &gentry);
-			mmu_pte_write_flush_tlb(vcpu, entry, *spte);
+			if (!remote_flush && need_remote_flush(entry, *spte))
+				remote_flush = true;
 			++spte;
 		}
 	}
+	mmu_pte_write_flush_tlb(vcpu, zap_page, remote_flush, local_flush);
+	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
 	kvm_mmu_audit(vcpu, "post pte write");
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	if (!is_error_pfn(vcpu->arch.update_pte.pfn)) {
@@ -2752,15 +2941,21 @@ EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
-	while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES &&
+	int free_pages;
+	LIST_HEAD(invalid_list);
+
+	free_pages = vcpu->kvm->arch.n_free_mmu_pages;
+	while (free_pages < KVM_REFILL_PAGES &&
 	       !list_empty(&vcpu->kvm->arch.active_mmu_pages)) {
 		struct kvm_mmu_page *sp;
 
 		sp = container_of(vcpu->kvm->arch.active_mmu_pages.prev,
 				  struct kvm_mmu_page, link);
-		kvm_mmu_zap_page(vcpu->kvm, sp);
+		free_pages += kvm_mmu_prepare_zap_page(vcpu->kvm, sp,
+						       &invalid_list);
 		++vcpu->kvm->stat.mmu_recycled;
 	}
+	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
 }
 
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
@@ -2788,11 +2983,8 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
 		return 1;
 	case EMULATE_DO_MMIO:
 		++vcpu->stat.mmio_exits;
-		return 0;
+		/* fall through */
 	case EMULATE_FAIL:
-		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
-		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
-		vcpu->run->internal.ndata = 0;
 		return 0;
 	default:
 		BUG();
@@ -2889,7 +3081,7 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 		pt = sp->spt;
 		for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
 			/* avoid RMW */
-			if (pt[i] & PT_WRITABLE_MASK)
+			if (is_writable_pte(pt[i]))
 				pt[i] &= ~PT_WRITABLE_MASK;
 	}
 	kvm_flush_remote_tlbs(kvm);
@@ -2898,28 +3090,29 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 void kvm_mmu_zap_all(struct kvm *kvm)
 {
 	struct kvm_mmu_page *sp, *node;
+	LIST_HEAD(invalid_list);
 
 	spin_lock(&kvm->mmu_lock);
 restart:
 	list_for_each_entry_safe(sp, node, &kvm->arch.active_mmu_pages, link)
-		if (kvm_mmu_zap_page(kvm, sp))
+		if (kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list))
 			goto restart;
 
+	kvm_mmu_commit_zap_page(kvm, &invalid_list);
 	spin_unlock(&kvm->mmu_lock);
-
-	kvm_flush_remote_tlbs(kvm);
 }
 
-static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm)
+static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm,
+					       struct list_head *invalid_list)
 {
 	struct kvm_mmu_page *page;
 
 	page = container_of(kvm->arch.active_mmu_pages.prev,
 			    struct kvm_mmu_page, link);
-	return kvm_mmu_zap_page(kvm, page) + 1;
+	return kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
 }
 
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	struct kvm *kvm;
 	struct kvm *kvm_freed = NULL;
@@ -2929,6 +3122,7 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 
 	list_for_each_entry(kvm, &vm_list, vm_list) {
 		int npages, idx, freed_pages;
+		LIST_HEAD(invalid_list);
 
 		idx = srcu_read_lock(&kvm->srcu);
 		spin_lock(&kvm->mmu_lock);
@@ -2936,12 +3130,14 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 			 kvm->arch.n_free_mmu_pages;
 		cache_count += npages;
 		if (!kvm_freed && nr_to_scan > 0 && npages > 0) {
-			freed_pages = kvm_mmu_remove_some_alloc_mmu_pages(kvm);
+			freed_pages = kvm_mmu_remove_some_alloc_mmu_pages(kvm,
+							  &invalid_list);
 			cache_count -= freed_pages;
 			kvm_freed = kvm;
 		}
 		nr_to_scan--;
 
+		kvm_mmu_commit_zap_page(kvm, &invalid_list);
 		spin_unlock(&kvm->mmu_lock);
 		srcu_read_unlock(&kvm->srcu, idx);
 	}
@@ -3067,7 +3263,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu,
 
 static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 {
-	kvm_set_cr3(vcpu, vcpu->arch.cr3);
+	(void)kvm_set_cr3(vcpu, vcpu->arch.cr3);
 	return 1;
 }
 
@@ -3324,9 +3520,9 @@ void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 	struct kvm_mmu_page *rev_sp;
 	gfn_t gfn;
 
-	if (*sptep & PT_WRITABLE_MASK) {
+	if (is_writable_pte(*sptep)) {
 		rev_sp = page_header(__pa(sptep));
-		gfn = rev_sp->gfns[sptep - rev_sp->spt];
+		gfn = kvm_mmu_page_get_gfn(rev_sp, sptep - rev_sp->spt);
 
 		if (!gfn_to_memslot(kvm, gfn)) {
 			if (!printk_ratelimit())
@@ -3340,8 +3536,7 @@ void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 			return;
 		}
 
-		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt],
-				    rev_sp->role.level);
+		rmapp = gfn_to_rmap(kvm, gfn, rev_sp->role.level);
 		if (!*rmapp) {
 			if (!printk_ratelimit())
 				return;
@@ -3374,7 +3569,7 @@ static void check_writable_mappings_rmap(struct kvm_vcpu *vcpu)
 
 			if (!(ent & PT_PRESENT_MASK))
 				continue;
-			if (!(ent & PT_WRITABLE_MASK))
+			if (!is_writable_pte(ent))
 				continue;
 			inspect_spte_has_rmap(vcpu->kvm, &pt[i]);
 		}
@@ -3402,13 +3597,12 @@ static void audit_write_protection(struct kvm_vcpu *vcpu)
 		if (sp->unsync)
 			continue;
 
-		gfn = unalias_gfn(vcpu->kvm, sp->gfn);
-		slot = gfn_to_memslot_unaliased(vcpu->kvm, sp->gfn);
+		slot = gfn_to_memslot(vcpu->kvm, sp->gfn);
 		rmapp = &slot->rmap[gfn - slot->base_gfn];
 
 		spte = rmap_next(vcpu->kvm, rmapp, NULL);
 		while (spte) {
-			if (*spte & PT_WRITABLE_MASK)
+			if (is_writable_pte(*spte))
 				printk(KERN_ERR "%s: (%s) shadow page has "
 				"writable mappings: gfn %lx role %x\n",
 			       __func__, audit_msg, sp->gfn,
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 42f07b1bfbc..3aab0f0930e 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -190,7 +190,7 @@ DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_unsync_page,
 	TP_ARGS(sp)
 );
 
-DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_zap_page,
+DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_prepare_zap_page,
 	TP_PROTO(struct kvm_mmu_page *sp),
 
 	TP_ARGS(sp)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 89d66ca4d87..51ef9097960 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -7,6 +7,7 @@
  * MMU support
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Yaniv Kamay  <yaniv@qumranet.com>
@@ -118,21 +119,25 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
 {
 	pt_element_t pte;
 	gfn_t table_gfn;
-	unsigned index, pt_access, pte_access;
+	unsigned index, pt_access, uninitialized_var(pte_access);
 	gpa_t pte_gpa;
-	int rsvd_fault = 0;
+	bool eperm, present, rsvd_fault;
 
 	trace_kvm_mmu_pagetable_walk(addr, write_fault, user_fault,
 				     fetch_fault);
 walk:
+	present = true;
+	eperm = rsvd_fault = false;
 	walker->level = vcpu->arch.mmu.root_level;
 	pte = vcpu->arch.cr3;
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
 		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
 		trace_kvm_mmu_paging_element(pte, walker->level);
-		if (!is_present_gpte(pte))
-			goto not_present;
+		if (!is_present_gpte(pte)) {
+			present = false;
+			goto error;
+		}
 		--walker->level;
 	}
 #endif
@@ -150,37 +155,42 @@ walk:
 		walker->table_gfn[walker->level - 1] = table_gfn;
 		walker->pte_gpa[walker->level - 1] = pte_gpa;
 
-		if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte)))
-			goto not_present;
+		if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte))) {
+			present = false;
+			break;
+		}
 
 		trace_kvm_mmu_paging_element(pte, walker->level);
 
-		if (!is_present_gpte(pte))
-			goto not_present;
+		if (!is_present_gpte(pte)) {
+			present = false;
+			break;
+		}
 
-		rsvd_fault = is_rsvd_bits_set(vcpu, pte, walker->level);
-		if (rsvd_fault)
-			goto access_error;
+		if (is_rsvd_bits_set(vcpu, pte, walker->level)) {
+			rsvd_fault = true;
+			break;
+		}
 
 		if (write_fault && !is_writable_pte(pte))
 			if (user_fault || is_write_protection(vcpu))
-				goto access_error;
+				eperm = true;
 
 		if (user_fault && !(pte & PT_USER_MASK))
-			goto access_error;
+			eperm = true;
 
 #if PTTYPE == 64
 		if (fetch_fault && (pte & PT64_NX_MASK))
-			goto access_error;
+			eperm = true;
 #endif
 
-		if (!(pte & PT_ACCESSED_MASK)) {
+		if (!eperm && !rsvd_fault && !(pte & PT_ACCESSED_MASK)) {
 			trace_kvm_mmu_set_accessed_bit(table_gfn, index,
 						       sizeof(pte));
-			mark_page_dirty(vcpu->kvm, table_gfn);
 			if (FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn,
 			    index, pte, pte|PT_ACCESSED_MASK))
 				goto walk;
+			mark_page_dirty(vcpu->kvm, table_gfn);
 			pte |= PT_ACCESSED_MASK;
 		}
 
@@ -213,15 +223,18 @@ walk:
 		--walker->level;
 	}
 
+	if (!present || eperm || rsvd_fault)
+		goto error;
+
 	if (write_fault && !is_dirty_gpte(pte)) {
 		bool ret;
 
 		trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
-		mark_page_dirty(vcpu->kvm, table_gfn);
 		ret = FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn, index, pte,
 			    pte|PT_DIRTY_MASK);
 		if (ret)
 			goto walk;
+		mark_page_dirty(vcpu->kvm, table_gfn);
 		pte |= PT_DIRTY_MASK;
 		walker->ptes[walker->level - 1] = pte;
 	}
@@ -229,22 +242,18 @@ walk:
 	walker->pt_access = pt_access;
 	walker->pte_access = pte_access;
 	pgprintk("%s: pte %llx pte_access %x pt_access %x\n",
-		 __func__, (u64)pte, pt_access, pte_access);
+		 __func__, (u64)pte, pte_access, pt_access);
 	return 1;
 
-not_present:
+error:
 	walker->error_code = 0;
-	goto err;
-
-access_error:
-	walker->error_code = PFERR_PRESENT_MASK;
-
-err:
+	if (present)
+		walker->error_code |= PFERR_PRESENT_MASK;
 	if (write_fault)
 		walker->error_code |= PFERR_WRITE_MASK;
 	if (user_fault)
 		walker->error_code |= PFERR_USER_MASK;
-	if (fetch_fault)
+	if (fetch_fault && is_nx(vcpu))
 		walker->error_code |= PFERR_FETCH_MASK;
 	if (rsvd_fault)
 		walker->error_code |= PFERR_RSVD_MASK;
@@ -252,7 +261,7 @@ err:
 	return 0;
 }
 
-static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
+static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 			      u64 *spte, const void *pte)
 {
 	pt_element_t gpte;
@@ -263,7 +272,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
 		if (!is_present_gpte(gpte)) {
-			if (page->unsync)
+			if (sp->unsync)
 				new_spte = shadow_trap_nonpresent_pte;
 			else
 				new_spte = shadow_notrap_nonpresent_pte;
@@ -272,7 +281,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 		return;
 	}
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
-	pte_access = page->role.access & FNAME(gpte_access)(vcpu, gpte);
+	pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 	if (gpte_to_gfn(gpte) != vcpu->arch.update_pte.gfn)
 		return;
 	pfn = vcpu->arch.update_pte.pfn;
@@ -285,11 +294,22 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	 * we call mmu_set_spte() with reset_host_protection = true beacuse that
 	 * vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1).
 	 */
-	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
-		     gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
+	mmu_set_spte(vcpu, spte, sp->role.access, pte_access, 0, 0,
+		     is_dirty_gpte(gpte), NULL, PT_PAGE_TABLE_LEVEL,
 		     gpte_to_gfn(gpte), pfn, true, true);
 }
 
+static bool FNAME(gpte_changed)(struct kvm_vcpu *vcpu,
+				struct guest_walker *gw, int level)
+{
+	int r;
+	pt_element_t curr_pte;
+
+	r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 1],
+				  &curr_pte, sizeof(curr_pte));
+	return r || curr_pte != gw->ptes[level - 1];
+}
+
 /*
  * Fetch a shadow pte for a specific level in the paging hierarchy.
  */
@@ -299,74 +319,86 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			 int *ptwrite, pfn_t pfn)
 {
 	unsigned access = gw->pt_access;
-	struct kvm_mmu_page *shadow_page;
-	u64 spte, *sptep = NULL;
-	int direct;
-	gfn_t table_gfn;
-	int r;
-	int level;
-	pt_element_t curr_pte;
-	struct kvm_shadow_walk_iterator iterator;
+	struct kvm_mmu_page *sp = NULL;
+	bool dirty = is_dirty_gpte(gw->ptes[gw->level - 1]);
+	int top_level;
+	unsigned direct_access;
+	struct kvm_shadow_walk_iterator it;
 
 	if (!is_present_gpte(gw->ptes[gw->level - 1]))
 		return NULL;
 
-	for_each_shadow_entry(vcpu, addr, iterator) {
-		level = iterator.level;
-		sptep = iterator.sptep;
-		if (iterator.level == hlevel) {
-			mmu_set_spte(vcpu, sptep, access,
-				     gw->pte_access & access,
-				     user_fault, write_fault,
-				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
-				     ptwrite, level,
-				     gw->gfn, pfn, false, true);
-			break;
-		}
+	direct_access = gw->pt_access & gw->pte_access;
+	if (!dirty)
+		direct_access &= ~ACC_WRITE_MASK;
 
-		if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep))
-			continue;
+	top_level = vcpu->arch.mmu.root_level;
+	if (top_level == PT32E_ROOT_LEVEL)
+		top_level = PT32_ROOT_LEVEL;
+	/*
+	 * Verify that the top-level gpte is still there.  Since the page
+	 * is a root page, it is either write protected (and cannot be
+	 * changed from now on) or it is invalid (in which case, we don't
+	 * really care if it changes underneath us after this point).
+	 */
+	if (FNAME(gpte_changed)(vcpu, gw, top_level))
+		goto out_gpte_changed;
 
-		if (is_large_pte(*sptep)) {
-			rmap_remove(vcpu->kvm, sptep);
-			__set_spte(sptep, shadow_trap_nonpresent_pte);
-			kvm_flush_remote_tlbs(vcpu->kvm);
-		}
+	for (shadow_walk_init(&it, vcpu, addr);
+	     shadow_walk_okay(&it) && it.level > gw->level;
+	     shadow_walk_next(&it)) {
+		gfn_t table_gfn;
 
-		if (level <= gw->level) {
-			int delta = level - gw->level + 1;
-			direct = 1;
-			if (!is_dirty_gpte(gw->ptes[level - delta]))
-				access &= ~ACC_WRITE_MASK;
-			table_gfn = gpte_to_gfn(gw->ptes[level - delta]);
-			/* advance table_gfn when emulating 1gb pages with 4k */
-			if (delta == 0)
-				table_gfn += PT_INDEX(addr, level);
-		} else {
-			direct = 0;
-			table_gfn = gw->table_gfn[level - 2];
-		}
-		shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
-					       direct, access, sptep);
-		if (!direct) {
-			r = kvm_read_guest_atomic(vcpu->kvm,
-						  gw->pte_gpa[level - 2],
-						  &curr_pte, sizeof(curr_pte));
-			if (r || curr_pte != gw->ptes[level - 2]) {
-				kvm_mmu_put_page(shadow_page, sptep);
-				kvm_release_pfn_clean(pfn);
-				sptep = NULL;
-				break;
-			}
+		drop_large_spte(vcpu, it.sptep);
+
+		sp = NULL;
+		if (!is_shadow_present_pte(*it.sptep)) {
+			table_gfn = gw->table_gfn[it.level - 2];
+			sp = kvm_mmu_get_page(vcpu, table_gfn, addr, it.level-1,
+					      false, access, it.sptep);
 		}
 
-		spte = __pa(shadow_page->spt)
-			| PT_PRESENT_MASK | PT_ACCESSED_MASK
-			| PT_WRITABLE_MASK | PT_USER_MASK;
-		*sptep = spte;
+		/*
+		 * Verify that the gpte in the page we've just write
+		 * protected is still there.
+		 */
+		if (FNAME(gpte_changed)(vcpu, gw, it.level - 1))
+			goto out_gpte_changed;
+
+		if (sp)
+			link_shadow_page(it.sptep, sp);
 	}
 
-	return sptep;
+	for (;
+	     shadow_walk_okay(&it) && it.level > hlevel;
+	     shadow_walk_next(&it)) {
+		gfn_t direct_gfn;
+
+		validate_direct_spte(vcpu, it.sptep, direct_access);
+
+		drop_large_spte(vcpu, it.sptep);
+
+		if (is_shadow_present_pte(*it.sptep))
+			continue;
+
+		direct_gfn = gw->gfn & ~(KVM_PAGES_PER_HPAGE(it.level) - 1);
+
+		sp = kvm_mmu_get_page(vcpu, direct_gfn, addr, it.level-1,
+				      true, direct_access, it.sptep);
+		link_shadow_page(it.sptep, sp);
+	}
+
+	mmu_set_spte(vcpu, it.sptep, access, gw->pte_access & access,
+		     user_fault, write_fault, dirty, ptwrite, it.level,
+		     gw->gfn, pfn, false, true);
+
+	return it.sptep;
+
+out_gpte_changed:
+	if (sp)
+		kvm_mmu_put_page(sp, it.sptep);
+	kvm_release_pfn_clean(pfn);
+	return NULL;
 }
 
 /*
@@ -430,11 +462,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
 
 	/* mmio */
-	if (is_error_pfn(pfn)) {
-		pgprintk("gfn %lx is mmio\n", walker.gfn);
-		kvm_release_pfn_clean(pfn);
-		return 1;
-	}
+	if (is_error_pfn(pfn))
+		return kvm_handle_bad_page(vcpu->kvm, walker.gfn, pfn);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	if (mmu_notifier_retry(vcpu, mmu_seq))
@@ -442,6 +471,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	kvm_mmu_free_some_pages(vcpu);
 	sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
 			     level, &write_pt, pfn);
+	(void)sptep;
 	pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
 		 sptep, *sptep, write_pt);
 
@@ -463,6 +493,7 @@ out_unlock:
 static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 {
 	struct kvm_shadow_walk_iterator iterator;
+	struct kvm_mmu_page *sp;
 	gpa_t pte_gpa = -1;
 	int level;
 	u64 *sptep;
@@ -474,10 +505,13 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 		level = iterator.level;
 		sptep = iterator.sptep;
 
+		sp = page_header(__pa(sptep));
 		if (is_last_spte(*sptep, level)) {
-			struct kvm_mmu_page *sp = page_header(__pa(sptep));
 			int offset, shift;
 
+			if (!sp->unsync)
+				break;
+
 			shift = PAGE_SHIFT -
 				  (PT_LEVEL_BITS - PT64_LEVEL_BITS) * level;
 			offset = sp->role.quadrant << shift;
@@ -486,16 +520,17 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 			pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t);
 
 			if (is_shadow_present_pte(*sptep)) {
-				rmap_remove(vcpu->kvm, sptep);
 				if (is_large_pte(*sptep))
 					--vcpu->kvm->stat.lpages;
+				drop_spte(vcpu->kvm, sptep,
+					  shadow_trap_nonpresent_pte);
 				need_flush = 1;
-			}
-			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			} else
+				__set_spte(sptep, shadow_trap_nonpresent_pte);
 			break;
 		}
 
-		if (!is_shadow_present_pte(*sptep))
+		if (!is_shadow_present_pte(*sptep) || !sp->unsync_children)
 			break;
 	}
 
@@ -569,9 +604,9 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
  * Using the cached information from sp->gfns is safe because:
  * - The spte has a reference to the struct page, so the pfn for a given gfn
  *   can't change unless all sptes pointing to it are nuked first.
- * - Alias changes zap the entire shadow cache.
  */
-static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+			    bool clear_unsync)
 {
 	int i, offset, nr_present;
 	bool reset_host_protection;
@@ -579,6 +614,9 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 	offset = nr_present = 0;
 
+	/* direct kvm_mmu_page can not be unsync. */
+	BUG_ON(sp->role.direct);
+
 	if (PTTYPE == 32)
 		offset = sp->role.quadrant << PT64_LEVEL_BITS;
 
@@ -588,7 +626,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		unsigned pte_access;
 		pt_element_t gpte;
 		gpa_t pte_gpa;
-		gfn_t gfn = sp->gfns[i];
+		gfn_t gfn;
 
 		if (!is_shadow_present_pte(sp->spt[i]))
 			continue;
@@ -599,16 +637,17 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 					  sizeof(pt_element_t)))
 			return -EINVAL;
 
-		if (gpte_to_gfn(gpte) != gfn || !is_present_gpte(gpte) ||
-		    !(gpte & PT_ACCESSED_MASK)) {
+		gfn = gpte_to_gfn(gpte);
+		if (is_rsvd_bits_set(vcpu, gpte, PT_PAGE_TABLE_LEVEL)
+		      || gfn != sp->gfns[i] || !is_present_gpte(gpte)
+		      || !(gpte & PT_ACCESSED_MASK)) {
 			u64 nonpresent;
 
-			rmap_remove(vcpu->kvm, &sp->spt[i]);
-			if (is_present_gpte(gpte))
+			if (is_present_gpte(gpte) || !clear_unsync)
 				nonpresent = shadow_trap_nonpresent_pte;
 			else
 				nonpresent = shadow_notrap_nonpresent_pte;
-			__set_spte(&sp->spt[i], nonpresent);
+			drop_spte(vcpu->kvm, &sp->spt[i], nonpresent);
 			continue;
 		}
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 96dc232bfc5..56c9b6bd765 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -4,6 +4,7 @@
  * AMD SVM support
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Yaniv Kamay  <yaniv@qumranet.com>
@@ -28,6 +29,7 @@
 #include <linux/ftrace_event.h>
 #include <linux/slab.h>
 
+#include <asm/tlbflush.h>
 #include <asm/desc.h>
 
 #include <asm/virtext.h>
@@ -56,6 +58,8 @@ MODULE_LICENSE("GPL");
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
+static bool erratum_383_found __read_mostly;
+
 static const u32 host_save_user_msrs[] = {
 #ifdef CONFIG_X86_64
 	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -282,11 +286,11 @@ static inline void flush_guest_tlb(struct kvm_vcpu *vcpu)
 
 static void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
+	vcpu->arch.efer = efer;
 	if (!npt_enabled && !(efer & EFER_LMA))
 		efer &= ~EFER_LME;
 
 	to_svm(vcpu)->vmcb->save.efer = efer | EFER_SVME;
-	vcpu->arch.efer = efer;
 }
 
 static int is_external_interrupt(u32 info)
@@ -374,6 +378,31 @@ static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 	svm->vmcb->control.event_inj_err = error_code;
 }
 
+static void svm_init_erratum_383(void)
+{
+	u32 low, high;
+	int err;
+	u64 val;
+
+	/* Only Fam10h is affected */
+	if (boot_cpu_data.x86 != 0x10)
+		return;
+
+	/* Use _safe variants to not break nested virtualization */
+	val = native_read_msr_safe(MSR_AMD64_DC_CFG, &err);
+	if (err)
+		return;
+
+	val |= (1ULL << 47);
+
+	low  = lower_32_bits(val);
+	high = upper_32_bits(val);
+
+	native_write_msr_safe(MSR_AMD64_DC_CFG, low, high);
+
+	erratum_383_found = true;
+}
+
 static int has_svm(void)
 {
 	const char *msg;
@@ -429,6 +458,8 @@ static int svm_hardware_enable(void *garbage)
 
 	wrmsrl(MSR_VM_HSAVE_PA, page_to_pfn(sd->save_area) << PAGE_SHIFT);
 
+	svm_init_erratum_383();
+
 	return 0;
 }
 
@@ -610,7 +641,7 @@ static __init int svm_hardware_setup(void)
 
 	if (nested) {
 		printk(KERN_INFO "kvm: Nested Virtualization enabled\n");
-		kvm_enable_efer_bits(EFER_SVME);
+		kvm_enable_efer_bits(EFER_SVME | EFER_LMSLE);
 	}
 
 	for_each_possible_cpu(cpu) {
@@ -776,7 +807,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	 * svm_set_cr0() sets PG and WP and clears NW and CD on save->cr0.
 	 */
 	svm->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
-	kvm_set_cr0(&svm->vcpu, svm->vcpu.arch.cr0);
+	(void)kvm_set_cr0(&svm->vcpu, svm->vcpu.arch.cr0);
 
 	save->cr4 = X86_CR4_PAE;
 	/* rdx = ?? */
@@ -873,13 +904,18 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	svm->asid_generation = 0;
 	init_vmcb(svm);
 
-	fx_init(&svm->vcpu);
+	err = fx_init(&svm->vcpu);
+	if (err)
+		goto free_page4;
+
 	svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
 	if (kvm_vcpu_is_bsp(&svm->vcpu))
 		svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
 
 	return &svm->vcpu;
 
+free_page4:
+	__free_page(hsave_page);
 free_page3:
 	__free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
 free_page2:
@@ -1410,8 +1446,59 @@ static int nm_interception(struct vcpu_svm *svm)
 	return 1;
 }
 
-static int mc_interception(struct vcpu_svm *svm)
+static bool is_erratum_383(void)
+{
+	int err, i;
+	u64 value;
+
+	if (!erratum_383_found)
+		return false;
+
+	value = native_read_msr_safe(MSR_IA32_MC0_STATUS, &err);
+	if (err)
+		return false;
+
+	/* Bit 62 may or may not be set for this mce */
+	value &= ~(1ULL << 62);
+
+	if (value != 0xb600000000010015ULL)
+		return false;
+
+	/* Clear MCi_STATUS registers */
+	for (i = 0; i < 6; ++i)
+		native_write_msr_safe(MSR_IA32_MCx_STATUS(i), 0, 0);
+
+	value = native_read_msr_safe(MSR_IA32_MCG_STATUS, &err);
+	if (!err) {
+		u32 low, high;
+
+		value &= ~(1ULL << 2);
+		low    = lower_32_bits(value);
+		high   = upper_32_bits(value);
+
+		native_write_msr_safe(MSR_IA32_MCG_STATUS, low, high);
+	}
+
+	/* Flush tlb to evict multi-match entries */
+	__flush_tlb_all();
+
+	return true;
+}
+
+static void svm_handle_mce(struct vcpu_svm *svm)
 {
+	if (is_erratum_383()) {
+		/*
+		 * Erratum 383 triggered. Guest state is corrupt so kill the
+		 * guest.
+		 */
+		pr_err("KVM: Guest triggered AMD Erratum 383\n");
+
+		kvm_make_request(KVM_REQ_TRIPLE_FAULT, &svm->vcpu);
+
+		return;
+	}
+
 	/*
 	 * On an #MC intercept the MCE handler is not called automatically in
 	 * the host. So do it by hand here.
@@ -1420,6 +1507,11 @@ static int mc_interception(struct vcpu_svm *svm)
 		"int $0x12\n");
 	/* not sure if we ever come back to this point */
 
+	return;
+}
+
+static int mc_interception(struct vcpu_svm *svm)
+{
 	return 1;
 }
 
@@ -1449,7 +1541,7 @@ static int io_interception(struct vcpu_svm *svm)
 	string = (io_info & SVM_IOIO_STR_MASK) != 0;
 	in = (io_info & SVM_IOIO_TYPE_MASK) != 0;
 	if (string || in)
-		return !(emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO);
+		return emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DONE;
 
 	port = io_info >> 16;
 	size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
@@ -1871,7 +1963,7 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 		svm->vmcb->save.cr3 = hsave->save.cr3;
 		svm->vcpu.arch.cr3 = hsave->save.cr3;
 	} else {
-		kvm_set_cr3(&svm->vcpu, hsave->save.cr3);
+		(void)kvm_set_cr3(&svm->vcpu, hsave->save.cr3);
 	}
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, hsave->save.rax);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, hsave->save.rsp);
@@ -1994,7 +2086,7 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 		svm->vmcb->save.cr3 = nested_vmcb->save.cr3;
 		svm->vcpu.arch.cr3 = nested_vmcb->save.cr3;
 	} else
-		kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
+		(void)kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
 
 	/* Guest paging mode is active - reset mmu */
 	kvm_mmu_reset_context(&svm->vcpu);
@@ -2300,16 +2392,12 @@ static int iret_interception(struct vcpu_svm *svm)
 
 static int invlpg_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
-		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
-	return 1;
+	return emulate_instruction(&svm->vcpu, 0, 0, 0) == EMULATE_DONE;
 }
 
 static int emulate_on_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
-		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
-	return 1;
+	return emulate_instruction(&svm->vcpu, 0, 0, 0) == EMULATE_DONE;
 }
 
 static int cr8_write_interception(struct vcpu_svm *svm)
@@ -2640,6 +2728,99 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_NPF]				= pf_interception,
 };
 
+void dump_vmcb(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+	struct vmcb_control_area *control = &svm->vmcb->control;
+	struct vmcb_save_area *save = &svm->vmcb->save;
+
+	pr_err("VMCB Control Area:\n");
+	pr_err("cr_read:            %04x\n", control->intercept_cr_read);
+	pr_err("cr_write:           %04x\n", control->intercept_cr_write);
+	pr_err("dr_read:            %04x\n", control->intercept_dr_read);
+	pr_err("dr_write:           %04x\n", control->intercept_dr_write);
+	pr_err("exceptions:         %08x\n", control->intercept_exceptions);
+	pr_err("intercepts:         %016llx\n", control->intercept);
+	pr_err("pause filter count: %d\n", control->pause_filter_count);
+	pr_err("iopm_base_pa:       %016llx\n", control->iopm_base_pa);
+	pr_err("msrpm_base_pa:      %016llx\n", control->msrpm_base_pa);
+	pr_err("tsc_offset:         %016llx\n", control->tsc_offset);
+	pr_err("asid:               %d\n", control->asid);
+	pr_err("tlb_ctl:            %d\n", control->tlb_ctl);
+	pr_err("int_ctl:            %08x\n", control->int_ctl);
+	pr_err("int_vector:         %08x\n", control->int_vector);
+	pr_err("int_state:          %08x\n", control->int_state);
+	pr_err("exit_code:          %08x\n", control->exit_code);
+	pr_err("exit_info1:         %016llx\n", control->exit_info_1);
+	pr_err("exit_info2:         %016llx\n", control->exit_info_2);
+	pr_err("exit_int_info:      %08x\n", control->exit_int_info);
+	pr_err("exit_int_info_err:  %08x\n", control->exit_int_info_err);
+	pr_err("nested_ctl:         %lld\n", control->nested_ctl);
+	pr_err("nested_cr3:         %016llx\n", control->nested_cr3);
+	pr_err("event_inj:          %08x\n", control->event_inj);
+	pr_err("event_inj_err:      %08x\n", control->event_inj_err);
+	pr_err("lbr_ctl:            %lld\n", control->lbr_ctl);
+	pr_err("next_rip:           %016llx\n", control->next_rip);
+	pr_err("VMCB State Save Area:\n");
+	pr_err("es:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->es.selector, save->es.attrib,
+		save->es.limit, save->es.base);
+	pr_err("cs:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->cs.selector, save->cs.attrib,
+		save->cs.limit, save->cs.base);
+	pr_err("ss:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->ss.selector, save->ss.attrib,
+		save->ss.limit, save->ss.base);
+	pr_err("ds:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->ds.selector, save->ds.attrib,
+		save->ds.limit, save->ds.base);
+	pr_err("fs:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->fs.selector, save->fs.attrib,
+		save->fs.limit, save->fs.base);
+	pr_err("gs:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->gs.selector, save->gs.attrib,
+		save->gs.limit, save->gs.base);
+	pr_err("gdtr: s: %04x a: %04x l: %08x b: %016llx\n",
+		save->gdtr.selector, save->gdtr.attrib,
+		save->gdtr.limit, save->gdtr.base);
+	pr_err("ldtr: s: %04x a: %04x l: %08x b: %016llx\n",
+		save->ldtr.selector, save->ldtr.attrib,
+		save->ldtr.limit, save->ldtr.base);
+	pr_err("idtr: s: %04x a: %04x l: %08x b: %016llx\n",
+		save->idtr.selector, save->idtr.attrib,
+		save->idtr.limit, save->idtr.base);
+	pr_err("tr:   s: %04x a: %04x l: %08x b: %016llx\n",
+		save->tr.selector, save->tr.attrib,
+		save->tr.limit, save->tr.base);
+	pr_err("cpl:            %d                efer:         %016llx\n",
+		save->cpl, save->efer);
+	pr_err("cr0:            %016llx cr2:          %016llx\n",
+		save->cr0, save->cr2);
+	pr_err("cr3:            %016llx cr4:          %016llx\n",
+		save->cr3, save->cr4);
+	pr_err("dr6:            %016llx dr7:          %016llx\n",
+		save->dr6, save->dr7);
+	pr_err("rip:            %016llx rflags:       %016llx\n",
+		save->rip, save->rflags);
+	pr_err("rsp:            %016llx rax:          %016llx\n",
+		save->rsp, save->rax);
+	pr_err("star:           %016llx lstar:        %016llx\n",
+		save->star, save->lstar);
+	pr_err("cstar:          %016llx sfmask:       %016llx\n",
+		save->cstar, save->sfmask);
+	pr_err("kernel_gs_base: %016llx sysenter_cs:  %016llx\n",
+		save->kernel_gs_base, save->sysenter_cs);
+	pr_err("sysenter_esp:   %016llx sysenter_eip: %016llx\n",
+		save->sysenter_esp, save->sysenter_eip);
+	pr_err("gpat:           %016llx dbgctl:       %016llx\n",
+		save->g_pat, save->dbgctl);
+	pr_err("br_from:        %016llx br_to:        %016llx\n",
+		save->br_from, save->br_to);
+	pr_err("excp_from:      %016llx excp_to:      %016llx\n",
+		save->last_excp_from, save->last_excp_to);
+
+}
+
 static int handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -2684,6 +2865,8 @@ static int handle_exit(struct kvm_vcpu *vcpu)
 		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
 		kvm_run->fail_entry.hardware_entry_failure_reason
 			= svm->vmcb->control.exit_code;
+		pr_err("KVM: FAILED VMRUN WITH VMCB:\n");
+		dump_vmcb(vcpu);
 		return 0;
 	}
 
@@ -2740,9 +2923,6 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
-	trace_kvm_inj_virq(irq);
-
-	++svm->vcpu.stat.irq_injections;
 	control = &svm->vmcb->control;
 	control->int_vector = irq;
 	control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -2756,6 +2936,9 @@ static void svm_set_irq(struct kvm_vcpu *vcpu)
 
 	BUG_ON(!(gif_set(svm)));
 
+	trace_kvm_inj_virq(vcpu->arch.interrupt.nr);
+	++vcpu->stat.irq_injections;
+
 	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
 		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
 }
@@ -3088,6 +3271,14 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
 		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
 	}
+
+	/*
+	 * We need to handle MC intercepts here before the vcpu has a chance to
+	 * change the physical cpu
+	 */
+	if (unlikely(svm->vmcb->control.exit_code ==
+		     SVM_EXIT_EXCP_BASE + MC_VECTOR))
+		svm_handle_mce(svm);
 }
 
 #undef R
@@ -3233,6 +3424,11 @@ static bool svm_rdtscp_supported(void)
 	return false;
 }
 
+static bool svm_has_wbinvd_exit(void)
+{
+	return true;
+}
+
 static void svm_fpu_deactivate(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -3317,6 +3513,8 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.rdtscp_supported = svm_rdtscp_supported,
 
 	.set_supported_cpuid = svm_set_supported_cpuid,
+
+	.has_wbinvd_exit = svm_has_wbinvd_exit,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 4ddadb1a5ff..e16a0dbe74d 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -1,3 +1,17 @@
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This module enables machines with Intel VT-x extensions to run virtual
+ * machines without emulation or binary translation.
+ *
+ * timer support
+ *
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
 #include <linux/kvm_host.h>
 #include <linux/kvm.h>
 #include <linux/hrtimer.h>
@@ -18,7 +32,7 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
 		atomic_inc(&ktimer->pending);
 		/* FIXME: this code should not know anything about vcpus */
-		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+		kvm_make_request(KVM_REQ_PENDING_TIMER, vcpu);
 	}
 
 	if (waitqueue_active(q))
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 859a01a07db..27a0222c294 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -5,6 +5,7 @@
  * machines without emulation or binary translation.
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Avi Kivity   <avi@qumranet.com>
@@ -36,6 +37,8 @@
 #include <asm/vmx.h>
 #include <asm/virtext.h>
 #include <asm/mce.h>
+#include <asm/i387.h>
+#include <asm/xcr.h>
 
 #include "trace.h"
 
@@ -63,6 +66,9 @@ module_param_named(unrestricted_guest,
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
+static int __read_mostly vmm_exclusive = 1;
+module_param(vmm_exclusive, bool, S_IRUGO);
+
 #define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
 	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
 #define KVM_GUEST_CR0_MASK						\
@@ -173,10 +179,13 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 
 static int init_rmode(struct kvm *kvm);
 static u64 construct_eptp(unsigned long root_hpa);
+static void kvm_cpu_vmxon(u64 addr);
+static void kvm_cpu_vmxoff(void);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
 static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
+static DEFINE_PER_CPU(struct desc_ptr, host_gdt);
 
 static unsigned long *vmx_io_bitmap_a;
 static unsigned long *vmx_io_bitmap_b;
@@ -334,6 +343,11 @@ static inline bool cpu_has_vmx_ept_1g_page(void)
 	return vmx_capability.ept & VMX_EPT_1GB_PAGE_BIT;
 }
 
+static inline bool cpu_has_vmx_ept_4levels(void)
+{
+	return vmx_capability.ept & VMX_EPT_PAGE_WALK_4_BIT;
+}
+
 static inline bool cpu_has_vmx_invept_individual_addr(void)
 {
 	return vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT;
@@ -349,6 +363,16 @@ static inline bool cpu_has_vmx_invept_global(void)
 	return vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT;
 }
 
+static inline bool cpu_has_vmx_invvpid_single(void)
+{
+	return vmx_capability.vpid & VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT;
+}
+
+static inline bool cpu_has_vmx_invvpid_global(void)
+{
+	return vmx_capability.vpid & VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
+}
+
 static inline bool cpu_has_vmx_ept(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
@@ -389,6 +413,12 @@ static inline bool cpu_has_virtual_nmis(void)
 	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
 }
 
+static inline bool cpu_has_vmx_wbinvd_exit(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_WBINVD_EXITING;
+}
+
 static inline bool report_flexpriority(void)
 {
 	return flexpriority_enabled;
@@ -453,6 +483,19 @@ static void vmcs_clear(struct vmcs *vmcs)
 		       vmcs, phys_addr);
 }
 
+static void vmcs_load(struct vmcs *vmcs)
+{
+	u64 phys_addr = __pa(vmcs);
+	u8 error;
+
+	asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
+			: "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
+			: "cc", "memory");
+	if (error)
+		printk(KERN_ERR "kvm: vmptrld %p/%llx fail\n",
+		       vmcs, phys_addr);
+}
+
 static void __vcpu_clear(void *arg)
 {
 	struct vcpu_vmx *vmx = arg;
@@ -475,12 +518,27 @@ static void vcpu_clear(struct vcpu_vmx *vmx)
 	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
 }
 
-static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
+static inline void vpid_sync_vcpu_single(struct vcpu_vmx *vmx)
 {
 	if (vmx->vpid == 0)
 		return;
 
-	__invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vmx->vpid, 0);
+	if (cpu_has_vmx_invvpid_single())
+		__invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vmx->vpid, 0);
+}
+
+static inline void vpid_sync_vcpu_global(void)
+{
+	if (cpu_has_vmx_invvpid_global())
+		__invvpid(VMX_VPID_EXTENT_ALL_CONTEXT, 0, 0);
+}
+
+static inline void vpid_sync_context(struct vcpu_vmx *vmx)
+{
+	if (cpu_has_vmx_invvpid_single())
+		vpid_sync_vcpu_single(vmx);
+	else
+		vpid_sync_vcpu_global();
 }
 
 static inline void ept_sync_global(void)
@@ -812,6 +870,9 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 	}
 #endif
+	if (current_thread_info()->status & TS_USEDFPU)
+		clts();
+	load_gdt(&__get_cpu_var(host_gdt));
 }
 
 static void vmx_load_host_state(struct vcpu_vmx *vmx)
@@ -828,35 +889,30 @@ static void vmx_load_host_state(struct vcpu_vmx *vmx)
 static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u64 phys_addr = __pa(vmx->vmcs);
 	u64 tsc_this, delta, new_offset;
+	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 
-	if (vcpu->cpu != cpu) {
+	if (!vmm_exclusive)
+		kvm_cpu_vmxon(phys_addr);
+	else if (vcpu->cpu != cpu)
 		vcpu_clear(vmx);
-		kvm_migrate_timers(vcpu);
-		set_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests);
-		local_irq_disable();
-		list_add(&vmx->local_vcpus_link,
-			 &per_cpu(vcpus_on_cpu, cpu));
-		local_irq_enable();
-	}
 
 	if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
-		u8 error;
-
 		per_cpu(current_vmcs, cpu) = vmx->vmcs;
-		asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
-			      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
-			      : "cc");
-		if (error)
-			printk(KERN_ERR "kvm: vmptrld %p/%llx fail\n",
-			       vmx->vmcs, phys_addr);
+		vmcs_load(vmx->vmcs);
 	}
 
 	if (vcpu->cpu != cpu) {
 		struct desc_ptr dt;
 		unsigned long sysenter_esp;
 
+		kvm_migrate_timers(vcpu);
+		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+		local_irq_disable();
+		list_add(&vmx->local_vcpus_link,
+			 &per_cpu(vcpus_on_cpu, cpu));
+		local_irq_enable();
+
 		vcpu->cpu = cpu;
 		/*
 		 * Linux uses per-cpu TSS and GDT, so set these when switching
@@ -884,6 +940,10 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
 {
 	__vmx_load_host_state(to_vmx(vcpu));
+	if (!vmm_exclusive) {
+		__vcpu_clear(to_vmx(vcpu));
+		kvm_cpu_vmxoff();
+	}
 }
 
 static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
@@ -1286,6 +1346,13 @@ static __init int vmx_disabled_by_bios(void)
 	/* locked but not enabled */
 }
 
+static void kvm_cpu_vmxon(u64 addr)
+{
+	asm volatile (ASM_VMX_VMXON_RAX
+			: : "a"(&addr), "m"(addr)
+			: "memory", "cc");
+}
+
 static int hardware_enable(void *garbage)
 {
 	int cpu = raw_smp_processor_id();
@@ -1308,11 +1375,13 @@ static int hardware_enable(void *garbage)
 		wrmsrl(MSR_IA32_FEATURE_CONTROL, old | test_bits);
 	}
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
-	asm volatile (ASM_VMX_VMXON_RAX
-		      : : "a"(&phys_addr), "m"(phys_addr)
-		      : "memory", "cc");
 
-	ept_sync_global();
+	if (vmm_exclusive) {
+		kvm_cpu_vmxon(phys_addr);
+		ept_sync_global();
+	}
+
+	store_gdt(&__get_cpu_var(host_gdt));
 
 	return 0;
 }
@@ -1334,13 +1403,15 @@ static void vmclear_local_vcpus(void)
 static void kvm_cpu_vmxoff(void)
 {
 	asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
-	write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
 static void hardware_disable(void *garbage)
 {
-	vmclear_local_vcpus();
-	kvm_cpu_vmxoff();
+	if (vmm_exclusive) {
+		vmclear_local_vcpus();
+		kvm_cpu_vmxoff();
+	}
+	write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
 static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
@@ -1539,7 +1610,8 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_vpid())
 		enable_vpid = 0;
 
-	if (!cpu_has_vmx_ept()) {
+	if (!cpu_has_vmx_ept() ||
+	    !cpu_has_vmx_ept_4levels()) {
 		enable_ept = 0;
 		enable_unrestricted_guest = 0;
 	}
@@ -1628,7 +1700,7 @@ static gva_t rmode_tss_base(struct kvm *kvm)
 		gfn_t base_gfn;
 
 		slots = kvm_memslots(kvm);
-		base_gfn = kvm->memslots->memslots[0].base_gfn +
+		base_gfn = slots->memslots[0].base_gfn +
 				 kvm->memslots->memslots[0].npages - 3;
 		return base_gfn << PAGE_SHIFT;
 	}
@@ -1744,27 +1816,27 @@ static void enter_lmode(struct kvm_vcpu *vcpu)
 			     (guest_tr_ar & ~AR_TYPE_MASK)
 			     | AR_TYPE_BUSY_64_TSS);
 	}
-	vcpu->arch.efer |= EFER_LMA;
-	vmx_set_efer(vcpu, vcpu->arch.efer);
+	vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
 }
 
 static void exit_lmode(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.efer &= ~EFER_LMA;
-
 	vmcs_write32(VM_ENTRY_CONTROLS,
 		     vmcs_read32(VM_ENTRY_CONTROLS)
 		     & ~VM_ENTRY_IA32E_MODE);
-	vmx_set_efer(vcpu, vcpu->arch.efer);
+	vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
 }
 
 #endif
 
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
-	vpid_sync_vcpu_all(to_vmx(vcpu));
-	if (enable_ept)
+	vpid_sync_context(to_vmx(vcpu));
+	if (enable_ept) {
+		if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+			return;
 		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
+	}
 }
 
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
@@ -2510,7 +2582,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, !!bypass_guest_pf);
 	vmcs_write32(CR3_TARGET_COUNT, 0);           /* 22.2.1 */
 
-	vmcs_writel(HOST_CR0, read_cr0());  /* 22.2.3 */
+	vmcs_writel(HOST_CR0, read_cr0() | X86_CR0_TS);  /* 22.2.3 */
 	vmcs_writel(HOST_CR4, read_cr4());  /* 22.2.3, 22.2.5 */
 	vmcs_writel(HOST_CR3, read_cr3());  /* 22.2.3  FIXME: shadow tables */
 
@@ -2602,21 +2674,27 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 static int init_rmode(struct kvm *kvm)
 {
+	int idx, ret = 0;
+
+	idx = srcu_read_lock(&kvm->srcu);
 	if (!init_rmode_tss(kvm))
-		return 0;
+		goto exit;
 	if (!init_rmode_identity_map(kvm))
-		return 0;
-	return 1;
+		goto exit;
+
+	ret = 1;
+exit:
+	srcu_read_unlock(&kvm->srcu, idx);
+	return ret;
 }
 
 static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u64 msr;
-	int ret, idx;
+	int ret;
 
 	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
-	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	if (!init_rmode(vmx->vcpu.kvm)) {
 		ret = -ENOMEM;
 		goto out;
@@ -2633,7 +2711,9 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		msr |= MSR_IA32_APICBASE_BSP;
 	kvm_set_apic_base(&vmx->vcpu, msr);
 
-	fx_init(&vmx->vcpu);
+	ret = fx_init(&vmx->vcpu);
+	if (ret != 0)
+		goto out;
 
 	seg_setup(VCPU_SREG_CS);
 	/*
@@ -2716,7 +2796,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx_fpu_activate(&vmx->vcpu);
 	update_exception_bitmap(&vmx->vcpu);
 
-	vpid_sync_vcpu_all(vmx);
+	vpid_sync_context(vmx);
 
 	ret = 0;
 
@@ -2724,7 +2804,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx->emulation_required = 0;
 
 out:
-	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	return ret;
 }
 
@@ -2829,9 +2908,7 @@ static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
 {
 	if (!cpu_has_virtual_nmis())
 		return to_vmx(vcpu)->soft_vnmi_blocked;
-	else
-		return !!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
-			  GUEST_INTR_STATE_NMI);
+	return vmcs_read32(GUEST_INTERRUPTIBILITY_INFO)	& GUEST_INTR_STATE_NMI;
 }
 
 static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
@@ -3073,7 +3150,7 @@ static int handle_io(struct kvm_vcpu *vcpu)
 	++vcpu->stat.io_exits;
 
 	if (string || in)
-		return !(emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO);
+		return emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DONE;
 
 	port = exit_qualification >> 16;
 	size = (exit_qualification & 7) + 1;
@@ -3093,11 +3170,20 @@ vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall)
 	hypercall[2] = 0xc1;
 }
 
+static void complete_insn_gp(struct kvm_vcpu *vcpu, int err)
+{
+	if (err)
+		kvm_inject_gp(vcpu, 0);
+	else
+		skip_emulated_instruction(vcpu);
+}
+
 static int handle_cr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification, val;
 	int cr;
 	int reg;
+	int err;
 
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	cr = exit_qualification & 15;
@@ -3108,16 +3194,16 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 		trace_kvm_cr_write(cr, val);
 		switch (cr) {
 		case 0:
-			kvm_set_cr0(vcpu, val);
-			skip_emulated_instruction(vcpu);
+			err = kvm_set_cr0(vcpu, val);
+			complete_insn_gp(vcpu, err);
 			return 1;
 		case 3:
-			kvm_set_cr3(vcpu, val);
-			skip_emulated_instruction(vcpu);
+			err = kvm_set_cr3(vcpu, val);
+			complete_insn_gp(vcpu, err);
 			return 1;
 		case 4:
-			kvm_set_cr4(vcpu, val);
-			skip_emulated_instruction(vcpu);
+			err = kvm_set_cr4(vcpu, val);
+			complete_insn_gp(vcpu, err);
 			return 1;
 		case 8: {
 				u8 cr8_prev = kvm_get_cr8(vcpu);
@@ -3324,30 +3410,25 @@ static int handle_invlpg(struct kvm_vcpu *vcpu)
 static int handle_wbinvd(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
-	/* TODO: Add support for VT-d/pass-through device */
+	kvm_emulate_wbinvd(vcpu);
 	return 1;
 }
 
-static int handle_apic_access(struct kvm_vcpu *vcpu)
+static int handle_xsetbv(struct kvm_vcpu *vcpu)
 {
-	unsigned long exit_qualification;
-	enum emulation_result er;
-	unsigned long offset;
+	u64 new_bv = kvm_read_edx_eax(vcpu);
+	u32 index = kvm_register_read(vcpu, VCPU_REGS_RCX);
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
-	offset = exit_qualification & 0xffful;
-
-	er = emulate_instruction(vcpu, 0, 0, 0);
-
-	if (er !=  EMULATE_DONE) {
-		printk(KERN_ERR
-		       "Fail to handle apic access vmexit! Offset is 0x%lx\n",
-		       offset);
-		return -ENOEXEC;
-	}
+	if (kvm_set_xcr(vcpu, index, new_bv) == 0)
+		skip_emulated_instruction(vcpu);
 	return 1;
 }
 
+static int handle_apic_access(struct kvm_vcpu *vcpu)
+{
+	return emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DONE;
+}
+
 static int handle_task_switch(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -3557,13 +3638,8 @@ static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 			goto out;
 		}
 
-		if (err != EMULATE_DONE) {
-			vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
-			vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
-			vcpu->run->internal.ndata = 0;
-			ret = 0;
-			goto out;
-		}
+		if (err != EMULATE_DONE)
+			return 0;
 
 		if (signal_pending(current))
 			goto out;
@@ -3626,6 +3702,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
+	[EXIT_REASON_XSETBV]                  = handle_xsetbv,
 	[EXIT_REASON_TASK_SWITCH]             = handle_task_switch,
 	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
 	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
@@ -3659,6 +3736,13 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 	if (enable_ept && is_paging(vcpu))
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
 
+	if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) {
+		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		vcpu->run->fail_entry.hardware_entry_failure_reason
+			= exit_reason;
+		return 0;
+	}
+
 	if (unlikely(vmx->fail)) {
 		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
 		vcpu->run->fail_entry.hardware_entry_failure_reason
@@ -3864,11 +3948,6 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
-	/*
-	 * Loading guest fpu may have cleared host cr0.ts
-	 */
-	vmcs_writel(HOST_CR0, read_cr0());
-
 	asm(
 		/* Store host registers */
 		"push %%"R"dx; push %%"R"bp;"
@@ -4004,6 +4083,19 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 	kmem_cache_free(kvm_vcpu_cache, vmx);
 }
 
+static inline void vmcs_init(struct vmcs *vmcs)
+{
+	u64 phys_addr = __pa(per_cpu(vmxarea, raw_smp_processor_id()));
+
+	if (!vmm_exclusive)
+		kvm_cpu_vmxon(phys_addr);
+
+	vmcs_clear(vmcs);
+
+	if (!vmm_exclusive)
+		kvm_cpu_vmxoff();
+}
+
 static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 {
 	int err;
@@ -4029,7 +4121,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 	if (!vmx->vmcs)
 		goto free_msrs;
 
-	vmcs_clear(vmx->vmcs);
+	vmcs_init(vmx->vmcs);
 
 	cpu = get_cpu();
 	vmx_vcpu_load(&vmx->vcpu, cpu);
@@ -4268,6 +4360,8 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.rdtscp_supported = vmx_rdtscp_supported,
 
 	.set_supported_cpuid = vmx_set_supported_cpuid,
+
+	.has_wbinvd_exit = cpu_has_vmx_wbinvd_exit,
 };
 
 static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05d571f6f19..97aab036dab 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2006 Qumranet, Inc.
  * Copyright (C) 2008 Qumranet, Inc.
  * Copyright IBM Corporation, 2008
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Avi Kivity   <avi@qumranet.com>
@@ -41,17 +42,19 @@
 #include <linux/srcu.h>
 #include <linux/slab.h>
 #include <linux/perf_event.h>
+#include <linux/uaccess.h>
 #include <trace/events/kvm.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
 #include <asm/debugreg.h>
-#include <asm/uaccess.h>
 #include <asm/msr.h>
 #include <asm/desc.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
+#include <asm/i387.h>
+#include <asm/xcr.h>
 
 #define MAX_IO_MSRS 256
 #define CR0_RESERVED_BITS						\
@@ -62,6 +65,7 @@
 	(~(unsigned long)(X86_CR4_VME | X86_CR4_PVI | X86_CR4_TSD | X86_CR4_DE\
 			  | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_MCE	\
 			  | X86_CR4_PGE | X86_CR4_PCE | X86_CR4_OSFXSR	\
+			  | X86_CR4_OSXSAVE \
 			  | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE))
 
 #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
@@ -147,6 +151,13 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+u64 __read_mostly host_xcr0;
+
+static inline u32 bit(int bitno)
+{
+	return 1 << (bitno & 31);
+}
+
 static void kvm_on_user_return(struct user_return_notifier *urn)
 {
 	unsigned slot;
@@ -285,7 +296,7 @@ static void kvm_multiple_exception(struct kvm_vcpu *vcpu,
 	prev_nr = vcpu->arch.exception.nr;
 	if (prev_nr == DF_VECTOR) {
 		/* triple fault -> shutdown */
-		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+		kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 		return;
 	}
 	class1 = exception_class(prev_nr);
@@ -414,121 +425,163 @@ out:
 	return changed;
 }
 
-void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+int kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
+	unsigned long old_cr0 = kvm_read_cr0(vcpu);
+	unsigned long update_bits = X86_CR0_PG | X86_CR0_WP |
+				    X86_CR0_CD | X86_CR0_NW;
+
 	cr0 |= X86_CR0_ET;
 
 #ifdef CONFIG_X86_64
-	if (cr0 & 0xffffffff00000000UL) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	if (cr0 & 0xffffffff00000000UL)
+		return 1;
 #endif
 
 	cr0 &= ~CR0_RESERVED_BITS;
 
-	if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD)) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD))
+		return 1;
 
-	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE))
+		return 1;
 
 	if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) {
 #ifdef CONFIG_X86_64
 		if ((vcpu->arch.efer & EFER_LME)) {
 			int cs_db, cs_l;
 
-			if (!is_pae(vcpu)) {
-				kvm_inject_gp(vcpu, 0);
-				return;
-			}
+			if (!is_pae(vcpu))
+				return 1;
 			kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
-			if (cs_l) {
-				kvm_inject_gp(vcpu, 0);
-				return;
-
-			}
+			if (cs_l)
+				return 1;
 		} else
 #endif
-		if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
-			kvm_inject_gp(vcpu, 0);
-			return;
-		}
-
+		if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3))
+			return 1;
 	}
 
 	kvm_x86_ops->set_cr0(vcpu, cr0);
 
-	kvm_mmu_reset_context(vcpu);
-	return;
+	if ((cr0 ^ old_cr0) & update_bits)
+		kvm_mmu_reset_context(vcpu);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr0);
 
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
 {
-	kvm_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~0x0eul) | (msw & 0x0f));
+	(void)kvm_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~0x0eul) | (msw & 0x0f));
 }
 EXPORT_SYMBOL_GPL(kvm_lmsw);
 
-void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 {
-	unsigned long old_cr4 = kvm_read_cr4(vcpu);
-	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+	u64 xcr0;
 
-	if (cr4 & CR4_RESERVED_BITS) {
+	/* Only support XCR_XFEATURE_ENABLED_MASK(xcr0) now  */
+	if (index != XCR_XFEATURE_ENABLED_MASK)
+		return 1;
+	xcr0 = xcr;
+	if (kvm_x86_ops->get_cpl(vcpu) != 0)
+		return 1;
+	if (!(xcr0 & XSTATE_FP))
+		return 1;
+	if ((xcr0 & XSTATE_YMM) && !(xcr0 & XSTATE_SSE))
+		return 1;
+	if (xcr0 & ~host_xcr0)
+		return 1;
+	vcpu->arch.xcr0 = xcr0;
+	vcpu->guest_xcr0_loaded = 0;
+	return 0;
+}
+
+int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
+{
+	if (__kvm_set_xcr(vcpu, index, xcr)) {
 		kvm_inject_gp(vcpu, 0);
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_set_xcr);
+
+static bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 1, 0);
+	return best && (best->ecx & bit(X86_FEATURE_XSAVE));
+}
+
+static void update_cpuid(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 1, 0);
+	if (!best)
 		return;
+
+	/* Update OSXSAVE bit */
+	if (cpu_has_xsave && best->function == 0x1) {
+		best->ecx &= ~(bit(X86_FEATURE_OSXSAVE));
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE))
+			best->ecx |= bit(X86_FEATURE_OSXSAVE);
 	}
+}
+
+int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+	unsigned long old_cr4 = kvm_read_cr4(vcpu);
+	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
+	if (cr4 & CR4_RESERVED_BITS)
+		return 1;
+
+	if (!guest_cpuid_has_xsave(vcpu) && (cr4 & X86_CR4_OSXSAVE))
+		return 1;
 
 	if (is_long_mode(vcpu)) {
-		if (!(cr4 & X86_CR4_PAE)) {
-			kvm_inject_gp(vcpu, 0);
-			return;
-		}
+		if (!(cr4 & X86_CR4_PAE))
+			return 1;
 	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
 		   && ((cr4 ^ old_cr4) & pdptr_bits)
-		   && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+		   && !load_pdptrs(vcpu, vcpu->arch.cr3))
+		return 1;
+
+	if (cr4 & X86_CR4_VMXE)
+		return 1;
 
-	if (cr4 & X86_CR4_VMXE) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
 	kvm_x86_ops->set_cr4(vcpu, cr4);
-	vcpu->arch.cr4 = cr4;
-	kvm_mmu_reset_context(vcpu);
+
+	if ((cr4 ^ old_cr4) & pdptr_bits)
+		kvm_mmu_reset_context(vcpu);
+
+	if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE)
+		update_cpuid(vcpu);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr4);
 
-void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
+int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 {
 	if (cr3 == vcpu->arch.cr3 && !pdptrs_changed(vcpu)) {
 		kvm_mmu_sync_roots(vcpu);
 		kvm_mmu_flush_tlb(vcpu);
-		return;
+		return 0;
 	}
 
 	if (is_long_mode(vcpu)) {
-		if (cr3 & CR3_L_MODE_RESERVED_BITS) {
-			kvm_inject_gp(vcpu, 0);
-			return;
-		}
+		if (cr3 & CR3_L_MODE_RESERVED_BITS)
+			return 1;
 	} else {
 		if (is_pae(vcpu)) {
-			if (cr3 & CR3_PAE_RESERVED_BITS) {
-				kvm_inject_gp(vcpu, 0);
-				return;
-			}
-			if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3)) {
-				kvm_inject_gp(vcpu, 0);
-				return;
-			}
+			if (cr3 & CR3_PAE_RESERVED_BITS)
+				return 1;
+			if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3))
+				return 1;
 		}
 		/*
 		 * We don't check reserved bits in nonpae mode, because
@@ -546,24 +599,28 @@ void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	 * to debug) behavior on the guest side.
 	 */
 	if (unlikely(!gfn_to_memslot(vcpu->kvm, cr3 >> PAGE_SHIFT)))
-		kvm_inject_gp(vcpu, 0);
-	else {
-		vcpu->arch.cr3 = cr3;
-		vcpu->arch.mmu.new_cr3(vcpu);
-	}
+		return 1;
+	vcpu->arch.cr3 = cr3;
+	vcpu->arch.mmu.new_cr3(vcpu);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr3);
 
-void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
+int __kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
-	if (cr8 & CR8_RESERVED_BITS) {
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	if (cr8 & CR8_RESERVED_BITS)
+		return 1;
 	if (irqchip_in_kernel(vcpu->kvm))
 		kvm_lapic_set_tpr(vcpu, cr8);
 	else
 		vcpu->arch.cr8 = cr8;
+	return 0;
+}
+
+void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
+{
+	if (__kvm_set_cr8(vcpu, cr8))
+		kvm_inject_gp(vcpu, 0);
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr8);
 
@@ -576,7 +633,7 @@ unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_get_cr8);
 
-int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
+static int __kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 {
 	switch (dr) {
 	case 0 ... 3:
@@ -585,29 +642,21 @@ int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 			vcpu->arch.eff_db[dr] = val;
 		break;
 	case 4:
-		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
-			kvm_queue_exception(vcpu, UD_VECTOR);
-			return 1;
-		}
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE))
+			return 1; /* #UD */
 		/* fall through */
 	case 6:
-		if (val & 0xffffffff00000000ULL) {
-			kvm_inject_gp(vcpu, 0);
-			return 1;
-		}
+		if (val & 0xffffffff00000000ULL)
+			return -1; /* #GP */
 		vcpu->arch.dr6 = (val & DR6_VOLATILE) | DR6_FIXED_1;
 		break;
 	case 5:
-		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
-			kvm_queue_exception(vcpu, UD_VECTOR);
-			return 1;
-		}
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE))
+			return 1; /* #UD */
 		/* fall through */
 	default: /* 7 */
-		if (val & 0xffffffff00000000ULL) {
-			kvm_inject_gp(vcpu, 0);
-			return 1;
-		}
+		if (val & 0xffffffff00000000ULL)
+			return -1; /* #GP */
 		vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
 		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
 			kvm_x86_ops->set_dr7(vcpu, vcpu->arch.dr7);
@@ -618,28 +667,37 @@ int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 
 	return 0;
 }
+
+int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
+{
+	int res;
+
+	res = __kvm_set_dr(vcpu, dr, val);
+	if (res > 0)
+		kvm_queue_exception(vcpu, UD_VECTOR);
+	else if (res < 0)
+		kvm_inject_gp(vcpu, 0);
+
+	return res;
+}
 EXPORT_SYMBOL_GPL(kvm_set_dr);
 
-int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
+static int _kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
 {
 	switch (dr) {
 	case 0 ... 3:
 		*val = vcpu->arch.db[dr];
 		break;
 	case 4:
-		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
-			kvm_queue_exception(vcpu, UD_VECTOR);
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE))
 			return 1;
-		}
 		/* fall through */
 	case 6:
 		*val = vcpu->arch.dr6;
 		break;
 	case 5:
-		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
-			kvm_queue_exception(vcpu, UD_VECTOR);
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE))
 			return 1;
-		}
 		/* fall through */
 	default: /* 7 */
 		*val = vcpu->arch.dr7;
@@ -648,12 +706,16 @@ int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(kvm_get_dr);
 
-static inline u32 bit(int bitno)
+int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
 {
-	return 1 << (bitno & 31);
+	if (_kvm_get_dr(vcpu, dr, val)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+	return 0;
 }
+EXPORT_SYMBOL_GPL(kvm_get_dr);
 
 /*
  * List of msr numbers which we expose to userspace through KVM_GET_MSRS
@@ -682,10 +744,14 @@ static unsigned num_msrs_to_save;
 
 static u32 emulated_msrs[] = {
 	MSR_IA32_MISC_ENABLE,
+	MSR_IA32_MCG_STATUS,
+	MSR_IA32_MCG_CTL,
 };
 
 static int set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
+	u64 old_efer = vcpu->arch.efer;
+
 	if (efer & efer_reserved_bits)
 		return 1;
 
@@ -714,11 +780,13 @@ static int set_efer(struct kvm_vcpu *vcpu, u64 efer)
 
 	kvm_x86_ops->set_efer(vcpu, efer);
 
-	vcpu->arch.efer = efer;
-
 	vcpu->arch.mmu.base_role.nxe = (efer & EFER_NX) && !tdp_enabled;
 	kvm_mmu_reset_context(vcpu);
 
+	/* Update reserved bits */
+	if ((efer ^ old_efer) & EFER_NX)
+		kvm_mmu_reset_context(vcpu);
+
 	return 0;
 }
 
@@ -882,7 +950,7 @@ static int kvm_request_guest_time_update(struct kvm_vcpu *v)
 
 	if (!vcpu->time_page)
 		return 0;
-	set_bit(KVM_REQ_KVMCLOCK_UPDATE, &v->requests);
+	kvm_make_request(KVM_REQ_KVMCLOCK_UPDATE, v);
 	return 1;
 }
 
@@ -1524,16 +1592,12 @@ static int __msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs *msrs,
 {
 	int i, idx;
 
-	vcpu_load(vcpu);
-
 	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	for (i = 0; i < msrs->nmsrs; ++i)
 		if (do_msr(vcpu, entries[i].index, &entries[i].data))
 			break;
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 
-	vcpu_put(vcpu);
-
 	return i;
 }
 
@@ -1562,7 +1626,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
 
 	r = -ENOMEM;
 	size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
-	entries = vmalloc(size);
+	entries = kmalloc(size, GFP_KERNEL);
 	if (!entries)
 		goto out;
 
@@ -1581,7 +1645,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
 	r = n;
 
 out_free:
-	vfree(entries);
+	kfree(entries);
 out:
 	return r;
 }
@@ -1618,6 +1682,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PCI_SEGMENT:
 	case KVM_CAP_DEBUGREGS:
 	case KVM_CAP_X86_ROBUST_SINGLESTEP:
+	case KVM_CAP_XSAVE:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1641,6 +1706,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_MCE:
 		r = KVM_MAX_MCE_BANKS;
 		break;
+	case KVM_CAP_XCRS:
+		r = cpu_has_xsave;
+		break;
 	default:
 		r = 0;
 		break;
@@ -1717,8 +1785,28 @@ out:
 	return r;
 }
 
+static void wbinvd_ipi(void *garbage)
+{
+	wbinvd();
+}
+
+static bool need_emulate_wbinvd(struct kvm_vcpu *vcpu)
+{
+	return vcpu->kvm->arch.iommu_domain &&
+		!(vcpu->kvm->arch.iommu_flags & KVM_IOMMU_CACHE_COHERENCY);
+}
+
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
+	/* Address WBINVD may be executed by guest */
+	if (need_emulate_wbinvd(vcpu)) {
+		if (kvm_x86_ops->has_wbinvd_exit())
+			cpumask_set_cpu(cpu, vcpu->arch.wbinvd_dirty_mask);
+		else if (vcpu->cpu != -1 && vcpu->cpu != cpu)
+			smp_call_function_single(vcpu->cpu,
+					wbinvd_ipi, NULL, 1);
+	}
+
 	kvm_x86_ops->vcpu_load(vcpu, cpu);
 	if (unlikely(per_cpu(cpu_tsc_khz, cpu) == 0)) {
 		unsigned long khz = cpufreq_quick_get(cpu);
@@ -1731,8 +1819,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	kvm_put_guest_fpu(vcpu);
 	kvm_x86_ops->vcpu_put(vcpu);
+	kvm_put_guest_fpu(vcpu);
 }
 
 static int is_efer_nx(void)
@@ -1781,7 +1869,6 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	if (copy_from_user(cpuid_entries, entries,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry)))
 		goto out_free;
-	vcpu_load(vcpu);
 	for (i = 0; i < cpuid->nent; i++) {
 		vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function;
 		vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax;
@@ -1799,7 +1886,7 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	r = 0;
 	kvm_apic_set_version(vcpu);
 	kvm_x86_ops->cpuid_update(vcpu);
-	vcpu_put(vcpu);
+	update_cpuid(vcpu);
 
 out_free:
 	vfree(cpuid_entries);
@@ -1820,11 +1907,10 @@ static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
 	if (copy_from_user(&vcpu->arch.cpuid_entries, entries,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out;
-	vcpu_load(vcpu);
 	vcpu->arch.cpuid_nent = cpuid->nent;
 	kvm_apic_set_version(vcpu);
 	kvm_x86_ops->cpuid_update(vcpu);
-	vcpu_put(vcpu);
+	update_cpuid(vcpu);
 	return 0;
 
 out:
@@ -1837,7 +1923,6 @@ static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
 {
 	int r;
 
-	vcpu_load(vcpu);
 	r = -E2BIG;
 	if (cpuid->nent < vcpu->arch.cpuid_nent)
 		goto out;
@@ -1849,7 +1934,6 @@ static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
 
 out:
 	cpuid->nent = vcpu->arch.cpuid_nent;
-	vcpu_put(vcpu);
 	return r;
 }
 
@@ -1901,13 +1985,13 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
 	/* cpuid 1.ecx */
 	const u32 kvm_supported_word4_x86_features =
-		F(XMM3) | 0 /* Reserved, DTES64, MONITOR */ |
+		F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
 		0 /* DS-CPL, VMX, SMX, EST */ |
 		0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
 		0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ |
 		0 /* Reserved, DCA */ | F(XMM4_1) |
 		F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
-		0 /* Reserved, XSAVE, OSXSAVE */;
+		0 /* Reserved, AES */ | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX);
 	/* cpuid 0x80000001.ecx */
 	const u32 kvm_supported_word6_x86_features =
 		F(LAHF_LM) | F(CMP_LEGACY) | F(SVM) | 0 /* ExtApicSpace */ |
@@ -1922,7 +2006,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 
 	switch (function) {
 	case 0:
-		entry->eax = min(entry->eax, (u32)0xb);
+		entry->eax = min(entry->eax, (u32)0xd);
 		break;
 	case 1:
 		entry->edx &= kvm_supported_word0_x86_features;
@@ -1980,6 +2064,20 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		}
 		break;
 	}
+	case 0xd: {
+		int i;
+
+		entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
+		for (i = 1; *nent < maxnent; ++i) {
+			if (entry[i - 1].eax == 0 && i != 2)
+				break;
+			do_cpuid_1_ent(&entry[i], function, i);
+			entry[i].flags |=
+			       KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
+			++*nent;
+		}
+		break;
+	}
 	case KVM_CPUID_SIGNATURE: {
 		char signature[12] = "KVMKVMKVM\0\0";
 		u32 *sigptr = (u32 *)signature;
@@ -2081,9 +2179,7 @@ out:
 static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
 				    struct kvm_lapic_state *s)
 {
-	vcpu_load(vcpu);
 	memcpy(s->regs, vcpu->arch.apic->regs, sizeof *s);
-	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -2091,11 +2187,9 @@ static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 				    struct kvm_lapic_state *s)
 {
-	vcpu_load(vcpu);
 	memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
 	kvm_apic_post_state_restore(vcpu);
 	update_cr8_intercept(vcpu);
-	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -2107,20 +2201,15 @@ static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	if (irqchip_in_kernel(vcpu->kvm))
 		return -ENXIO;
-	vcpu_load(vcpu);
 
 	kvm_queue_interrupt(vcpu, irq->irq, false);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
 static int kvm_vcpu_ioctl_nmi(struct kvm_vcpu *vcpu)
 {
-	vcpu_load(vcpu);
 	kvm_inject_nmi(vcpu);
-	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -2140,7 +2229,6 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
 	int r;
 	unsigned bank_num = mcg_cap & 0xff, bank;
 
-	vcpu_load(vcpu);
 	r = -EINVAL;
 	if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
 		goto out;
@@ -2155,7 +2243,6 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
 	for (bank = 0; bank < bank_num; bank++)
 		vcpu->arch.mce_banks[bank*4] = ~(u64)0;
 out:
-	vcpu_put(vcpu);
 	return r;
 }
 
@@ -2188,7 +2275,7 @@ static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
 			printk(KERN_DEBUG "kvm: set_mce: "
 			       "injects mce exception while "
 			       "previous one is in progress!\n");
-			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+			kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 			return 0;
 		}
 		if (banks[1] & MCI_STATUS_VAL)
@@ -2213,8 +2300,6 @@ static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
 static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 					       struct kvm_vcpu_events *events)
 {
-	vcpu_load(vcpu);
-
 	events->exception.injected =
 		vcpu->arch.exception.pending &&
 		!kvm_exception_is_soft(vcpu->arch.exception.nr);
@@ -2239,8 +2324,6 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 	events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING
 			 | KVM_VCPUEVENT_VALID_SIPI_VECTOR
 			 | KVM_VCPUEVENT_VALID_SHADOW);
-
-	vcpu_put(vcpu);
 }
 
 static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
@@ -2251,8 +2334,6 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 			      | KVM_VCPUEVENT_VALID_SHADOW))
 		return -EINVAL;
 
-	vcpu_load(vcpu);
-
 	vcpu->arch.exception.pending = events->exception.injected;
 	vcpu->arch.exception.nr = events->exception.nr;
 	vcpu->arch.exception.has_error_code = events->exception.has_error_code;
@@ -2275,22 +2356,16 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 	if (events->flags & KVM_VCPUEVENT_VALID_SIPI_VECTOR)
 		vcpu->arch.sipi_vector = events->sipi_vector;
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
 static void kvm_vcpu_ioctl_x86_get_debugregs(struct kvm_vcpu *vcpu,
 					     struct kvm_debugregs *dbgregs)
 {
-	vcpu_load(vcpu);
-
 	memcpy(dbgregs->db, vcpu->arch.db, sizeof(vcpu->arch.db));
 	dbgregs->dr6 = vcpu->arch.dr6;
 	dbgregs->dr7 = vcpu->arch.dr7;
 	dbgregs->flags = 0;
-
-	vcpu_put(vcpu);
 }
 
 static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
@@ -2299,40 +2374,113 @@ static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
 	if (dbgregs->flags)
 		return -EINVAL;
 
-	vcpu_load(vcpu);
-
 	memcpy(vcpu->arch.db, dbgregs->db, sizeof(vcpu->arch.db));
 	vcpu->arch.dr6 = dbgregs->dr6;
 	vcpu->arch.dr7 = dbgregs->dr7;
 
-	vcpu_put(vcpu);
+	return 0;
+}
+
+static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu,
+					 struct kvm_xsave *guest_xsave)
+{
+	if (cpu_has_xsave)
+		memcpy(guest_xsave->region,
+			&vcpu->arch.guest_fpu.state->xsave,
+			sizeof(struct xsave_struct));
+	else {
+		memcpy(guest_xsave->region,
+			&vcpu->arch.guest_fpu.state->fxsave,
+			sizeof(struct i387_fxsave_struct));
+		*(u64 *)&guest_xsave->region[XSAVE_HDR_OFFSET / sizeof(u32)] =
+			XSTATE_FPSSE;
+	}
+}
+
+static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
+					struct kvm_xsave *guest_xsave)
+{
+	u64 xstate_bv =
+		*(u64 *)&guest_xsave->region[XSAVE_HDR_OFFSET / sizeof(u32)];
 
+	if (cpu_has_xsave)
+		memcpy(&vcpu->arch.guest_fpu.state->xsave,
+			guest_xsave->region, sizeof(struct xsave_struct));
+	else {
+		if (xstate_bv & ~XSTATE_FPSSE)
+			return -EINVAL;
+		memcpy(&vcpu->arch.guest_fpu.state->fxsave,
+			guest_xsave->region, sizeof(struct i387_fxsave_struct));
+	}
 	return 0;
 }
 
+static void kvm_vcpu_ioctl_x86_get_xcrs(struct kvm_vcpu *vcpu,
+					struct kvm_xcrs *guest_xcrs)
+{
+	if (!cpu_has_xsave) {
+		guest_xcrs->nr_xcrs = 0;
+		return;
+	}
+
+	guest_xcrs->nr_xcrs = 1;
+	guest_xcrs->flags = 0;
+	guest_xcrs->xcrs[0].xcr = XCR_XFEATURE_ENABLED_MASK;
+	guest_xcrs->xcrs[0].value = vcpu->arch.xcr0;
+}
+
+static int kvm_vcpu_ioctl_x86_set_xcrs(struct kvm_vcpu *vcpu,
+				       struct kvm_xcrs *guest_xcrs)
+{
+	int i, r = 0;
+
+	if (!cpu_has_xsave)
+		return -EINVAL;
+
+	if (guest_xcrs->nr_xcrs > KVM_MAX_XCRS || guest_xcrs->flags)
+		return -EINVAL;
+
+	for (i = 0; i < guest_xcrs->nr_xcrs; i++)
+		/* Only support XCR0 currently */
+		if (guest_xcrs->xcrs[0].xcr == XCR_XFEATURE_ENABLED_MASK) {
+			r = __kvm_set_xcr(vcpu, XCR_XFEATURE_ENABLED_MASK,
+				guest_xcrs->xcrs[0].value);
+			break;
+		}
+	if (r)
+		r = -EINVAL;
+	return r;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
 	int r;
-	struct kvm_lapic_state *lapic = NULL;
+	union {
+		struct kvm_lapic_state *lapic;
+		struct kvm_xsave *xsave;
+		struct kvm_xcrs *xcrs;
+		void *buffer;
+	} u;
 
+	u.buffer = NULL;
 	switch (ioctl) {
 	case KVM_GET_LAPIC: {
 		r = -EINVAL;
 		if (!vcpu->arch.apic)
 			goto out;
-		lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
+		u.lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 
 		r = -ENOMEM;
-		if (!lapic)
+		if (!u.lapic)
 			goto out;
-		r = kvm_vcpu_ioctl_get_lapic(vcpu, lapic);
+		r = kvm_vcpu_ioctl_get_lapic(vcpu, u.lapic);
 		if (r)
 			goto out;
 		r = -EFAULT;
-		if (copy_to_user(argp, lapic, sizeof(struct kvm_lapic_state)))
+		if (copy_to_user(argp, u.lapic, sizeof(struct kvm_lapic_state)))
 			goto out;
 		r = 0;
 		break;
@@ -2341,14 +2489,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EINVAL;
 		if (!vcpu->arch.apic)
 			goto out;
-		lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
+		u.lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 		r = -ENOMEM;
-		if (!lapic)
+		if (!u.lapic)
 			goto out;
 		r = -EFAULT;
-		if (copy_from_user(lapic, argp, sizeof(struct kvm_lapic_state)))
+		if (copy_from_user(u.lapic, argp, sizeof(struct kvm_lapic_state)))
 			goto out;
-		r = kvm_vcpu_ioctl_set_lapic(vcpu, lapic);
+		r = kvm_vcpu_ioctl_set_lapic(vcpu, u.lapic);
 		if (r)
 			goto out;
 		r = 0;
@@ -2464,9 +2612,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&mce, argp, sizeof mce))
 			goto out;
-		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
-		vcpu_put(vcpu);
 		break;
 	}
 	case KVM_GET_VCPU_EVENTS: {
@@ -2513,11 +2659,67 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_x86_set_debugregs(vcpu, &dbgregs);
 		break;
 	}
+	case KVM_GET_XSAVE: {
+		u.xsave = kzalloc(sizeof(struct kvm_xsave), GFP_KERNEL);
+		r = -ENOMEM;
+		if (!u.xsave)
+			break;
+
+		kvm_vcpu_ioctl_x86_get_xsave(vcpu, u.xsave);
+
+		r = -EFAULT;
+		if (copy_to_user(argp, u.xsave, sizeof(struct kvm_xsave)))
+			break;
+		r = 0;
+		break;
+	}
+	case KVM_SET_XSAVE: {
+		u.xsave = kzalloc(sizeof(struct kvm_xsave), GFP_KERNEL);
+		r = -ENOMEM;
+		if (!u.xsave)
+			break;
+
+		r = -EFAULT;
+		if (copy_from_user(u.xsave, argp, sizeof(struct kvm_xsave)))
+			break;
+
+		r = kvm_vcpu_ioctl_x86_set_xsave(vcpu, u.xsave);
+		break;
+	}
+	case KVM_GET_XCRS: {
+		u.xcrs = kzalloc(sizeof(struct kvm_xcrs), GFP_KERNEL);
+		r = -ENOMEM;
+		if (!u.xcrs)
+			break;
+
+		kvm_vcpu_ioctl_x86_get_xcrs(vcpu, u.xcrs);
+
+		r = -EFAULT;
+		if (copy_to_user(argp, u.xcrs,
+				 sizeof(struct kvm_xcrs)))
+			break;
+		r = 0;
+		break;
+	}
+	case KVM_SET_XCRS: {
+		u.xcrs = kzalloc(sizeof(struct kvm_xcrs), GFP_KERNEL);
+		r = -ENOMEM;
+		if (!u.xcrs)
+			break;
+
+		r = -EFAULT;
+		if (copy_from_user(u.xcrs, argp,
+				   sizeof(struct kvm_xcrs)))
+			break;
+
+		r = kvm_vcpu_ioctl_x86_set_xcrs(vcpu, u.xcrs);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
 out:
-	kfree(lapic);
+	kfree(u.buffer);
 	return r;
 }
 
@@ -2560,115 +2762,6 @@ static int kvm_vm_ioctl_get_nr_mmu_pages(struct kvm *kvm)
 	return kvm->arch.n_alloc_mmu_pages;
 }
 
-gfn_t unalias_gfn_instantiation(struct kvm *kvm, gfn_t gfn)
-{
-	int i;
-	struct kvm_mem_alias *alias;
-	struct kvm_mem_aliases *aliases;
-
-	aliases = kvm_aliases(kvm);
-
-	for (i = 0; i < aliases->naliases; ++i) {
-		alias = &aliases->aliases[i];
-		if (alias->flags & KVM_ALIAS_INVALID)
-			continue;
-		if (gfn >= alias->base_gfn
-		    && gfn < alias->base_gfn + alias->npages)
-			return alias->target_gfn + gfn - alias->base_gfn;
-	}
-	return gfn;
-}
-
-gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
-{
-	int i;
-	struct kvm_mem_alias *alias;
-	struct kvm_mem_aliases *aliases;
-
-	aliases = kvm_aliases(kvm);
-
-	for (i = 0; i < aliases->naliases; ++i) {
-		alias = &aliases->aliases[i];
-		if (gfn >= alias->base_gfn
-		    && gfn < alias->base_gfn + alias->npages)
-			return alias->target_gfn + gfn - alias->base_gfn;
-	}
-	return gfn;
-}
-
-/*
- * Set a new alias region.  Aliases map a portion of physical memory into
- * another portion.  This is useful for memory windows, for example the PC
- * VGA region.
- */
-static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
-					 struct kvm_memory_alias *alias)
-{
-	int r, n;
-	struct kvm_mem_alias *p;
-	struct kvm_mem_aliases *aliases, *old_aliases;
-
-	r = -EINVAL;
-	/* General sanity checks */
-	if (alias->memory_size & (PAGE_SIZE - 1))
-		goto out;
-	if (alias->guest_phys_addr & (PAGE_SIZE - 1))
-		goto out;
-	if (alias->slot >= KVM_ALIAS_SLOTS)
-		goto out;
-	if (alias->guest_phys_addr + alias->memory_size
-	    < alias->guest_phys_addr)
-		goto out;
-	if (alias->target_phys_addr + alias->memory_size
-	    < alias->target_phys_addr)
-		goto out;
-
-	r = -ENOMEM;
-	aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
-	if (!aliases)
-		goto out;
-
-	mutex_lock(&kvm->slots_lock);
-
-	/* invalidate any gfn reference in case of deletion/shrinking */
-	memcpy(aliases, kvm->arch.aliases, sizeof(struct kvm_mem_aliases));
-	aliases->aliases[alias->slot].flags |= KVM_ALIAS_INVALID;
-	old_aliases = kvm->arch.aliases;
-	rcu_assign_pointer(kvm->arch.aliases, aliases);
-	synchronize_srcu_expedited(&kvm->srcu);
-	kvm_mmu_zap_all(kvm);
-	kfree(old_aliases);
-
-	r = -ENOMEM;
-	aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
-	if (!aliases)
-		goto out_unlock;
-
-	memcpy(aliases, kvm->arch.aliases, sizeof(struct kvm_mem_aliases));
-
-	p = &aliases->aliases[alias->slot];
-	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
-	p->npages = alias->memory_size >> PAGE_SHIFT;
-	p->target_gfn = alias->target_phys_addr >> PAGE_SHIFT;
-	p->flags &= ~(KVM_ALIAS_INVALID);
-
-	for (n = KVM_ALIAS_SLOTS; n > 0; --n)
-		if (aliases->aliases[n - 1].npages)
-			break;
-	aliases->naliases = n;
-
-	old_aliases = kvm->arch.aliases;
-	rcu_assign_pointer(kvm->arch.aliases, aliases);
-	synchronize_srcu_expedited(&kvm->srcu);
-	kfree(old_aliases);
-	r = 0;
-
-out_unlock:
-	mutex_unlock(&kvm->slots_lock);
-out:
-	return r;
-}
-
 static int kvm_vm_ioctl_get_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 {
 	int r;
@@ -2797,7 +2890,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	struct kvm_memory_slot *memslot;
 	unsigned long n;
 	unsigned long is_dirty = 0;
-	unsigned long *dirty_bitmap = NULL;
 
 	mutex_lock(&kvm->slots_lock);
 
@@ -2812,27 +2904,30 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 
 	n = kvm_dirty_bitmap_bytes(memslot);
 
-	r = -ENOMEM;
-	dirty_bitmap = vmalloc(n);
-	if (!dirty_bitmap)
-		goto out;
-	memset(dirty_bitmap, 0, n);
-
 	for (i = 0; !is_dirty && i < n/sizeof(long); i++)
 		is_dirty = memslot->dirty_bitmap[i];
 
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
 		struct kvm_memslots *slots, *old_slots;
+		unsigned long *dirty_bitmap;
 
 		spin_lock(&kvm->mmu_lock);
 		kvm_mmu_slot_remove_write_access(kvm, log->slot);
 		spin_unlock(&kvm->mmu_lock);
 
-		slots = kzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
-		if (!slots)
-			goto out_free;
+		r = -ENOMEM;
+		dirty_bitmap = vmalloc(n);
+		if (!dirty_bitmap)
+			goto out;
+		memset(dirty_bitmap, 0, n);
 
+		r = -ENOMEM;
+		slots = kzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
+		if (!slots) {
+			vfree(dirty_bitmap);
+			goto out;
+		}
 		memcpy(slots, kvm->memslots, sizeof(struct kvm_memslots));
 		slots->memslots[log->slot].dirty_bitmap = dirty_bitmap;
 
@@ -2841,13 +2936,20 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		synchronize_srcu_expedited(&kvm->srcu);
 		dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap;
 		kfree(old_slots);
+
+		r = -EFAULT;
+		if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n)) {
+			vfree(dirty_bitmap);
+			goto out;
+		}
+		vfree(dirty_bitmap);
+	} else {
+		r = -EFAULT;
+		if (clear_user(log->dirty_bitmap, n))
+			goto out;
 	}
 
 	r = 0;
-	if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n))
-		r = -EFAULT;
-out_free:
-	vfree(dirty_bitmap);
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -2867,7 +2969,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	union {
 		struct kvm_pit_state ps;
 		struct kvm_pit_state2 ps2;
-		struct kvm_memory_alias alias;
 		struct kvm_pit_config pit_config;
 	} u;
 
@@ -2888,22 +2989,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		break;
 	}
-	case KVM_SET_MEMORY_REGION: {
-		struct kvm_memory_region kvm_mem;
-		struct kvm_userspace_memory_region kvm_userspace_mem;
-
-		r = -EFAULT;
-		if (copy_from_user(&kvm_mem, argp, sizeof kvm_mem))
-			goto out;
-		kvm_userspace_mem.slot = kvm_mem.slot;
-		kvm_userspace_mem.flags = kvm_mem.flags;
-		kvm_userspace_mem.guest_phys_addr = kvm_mem.guest_phys_addr;
-		kvm_userspace_mem.memory_size = kvm_mem.memory_size;
-		r = kvm_vm_ioctl_set_memory_region(kvm, &kvm_userspace_mem, 0);
-		if (r)
-			goto out;
-		break;
-	}
 	case KVM_SET_NR_MMU_PAGES:
 		r = kvm_vm_ioctl_set_nr_mmu_pages(kvm, arg);
 		if (r)
@@ -2912,14 +2997,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	case KVM_GET_NR_MMU_PAGES:
 		r = kvm_vm_ioctl_get_nr_mmu_pages(kvm);
 		break;
-	case KVM_SET_MEMORY_ALIAS:
-		r = -EFAULT;
-		if (copy_from_user(&u.alias, argp, sizeof(struct kvm_memory_alias)))
-			goto out;
-		r = kvm_vm_ioctl_set_memory_alias(kvm, &u.alias);
-		if (r)
-			goto out;
-		break;
 	case KVM_CREATE_IRQCHIP: {
 		struct kvm_pic *vpic;
 
@@ -3259,7 +3336,7 @@ static int kvm_read_guest_virt_helper(gva_t addr, void *val, unsigned int bytes,
 		}
 		ret = kvm_read_guest(vcpu->kvm, gpa, data, toread);
 		if (ret < 0) {
-			r = X86EMUL_UNHANDLEABLE;
+			r = X86EMUL_IO_NEEDED;
 			goto out;
 		}
 
@@ -3315,7 +3392,7 @@ static int kvm_write_guest_virt_system(gva_t addr, void *val,
 		}
 		ret = kvm_write_guest(vcpu->kvm, gpa, data, towrite);
 		if (ret < 0) {
-			r = X86EMUL_UNHANDLEABLE;
+			r = X86EMUL_IO_NEEDED;
 			goto out;
 		}
 
@@ -3330,10 +3407,10 @@ out:
 static int emulator_read_emulated(unsigned long addr,
 				  void *val,
 				  unsigned int bytes,
+				  unsigned int *error_code,
 				  struct kvm_vcpu *vcpu)
 {
 	gpa_t                 gpa;
-	u32 error_code;
 
 	if (vcpu->mmio_read_completed) {
 		memcpy(val, vcpu->mmio_data, bytes);
@@ -3343,12 +3420,10 @@ static int emulator_read_emulated(unsigned long addr,
 		return X86EMUL_CONTINUE;
 	}
 
-	gpa = kvm_mmu_gva_to_gpa_read(vcpu, addr, &error_code);
+	gpa = kvm_mmu_gva_to_gpa_read(vcpu, addr, error_code);
 
-	if (gpa == UNMAPPED_GVA) {
-		kvm_inject_page_fault(vcpu, addr, error_code);
+	if (gpa == UNMAPPED_GVA)
 		return X86EMUL_PROPAGATE_FAULT;
-	}
 
 	/* For APIC access vmexit */
 	if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
@@ -3370,11 +3445,12 @@ mmio:
 	trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
 
 	vcpu->mmio_needed = 1;
-	vcpu->mmio_phys_addr = gpa;
-	vcpu->mmio_size = bytes;
-	vcpu->mmio_is_write = 0;
+	vcpu->run->exit_reason = KVM_EXIT_MMIO;
+	vcpu->run->mmio.phys_addr = vcpu->mmio_phys_addr = gpa;
+	vcpu->run->mmio.len = vcpu->mmio_size = bytes;
+	vcpu->run->mmio.is_write = vcpu->mmio_is_write = 0;
 
-	return X86EMUL_UNHANDLEABLE;
+	return X86EMUL_IO_NEEDED;
 }
 
 int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
@@ -3392,17 +3468,15 @@ int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
 static int emulator_write_emulated_onepage(unsigned long addr,
 					   const void *val,
 					   unsigned int bytes,
+					   unsigned int *error_code,
 					   struct kvm_vcpu *vcpu)
 {
 	gpa_t                 gpa;
-	u32 error_code;
 
-	gpa = kvm_mmu_gva_to_gpa_write(vcpu, addr, &error_code);
+	gpa = kvm_mmu_gva_to_gpa_write(vcpu, addr, error_code);
 
-	if (gpa == UNMAPPED_GVA) {
-		kvm_inject_page_fault(vcpu, addr, error_code);
+	if (gpa == UNMAPPED_GVA)
 		return X86EMUL_PROPAGATE_FAULT;
-	}
 
 	/* For APIC access vmexit */
 	if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
@@ -3420,10 +3494,11 @@ mmio:
 		return X86EMUL_CONTINUE;
 
 	vcpu->mmio_needed = 1;
-	vcpu->mmio_phys_addr = gpa;
-	vcpu->mmio_size = bytes;
-	vcpu->mmio_is_write = 1;
-	memcpy(vcpu->mmio_data, val, bytes);
+	vcpu->run->exit_reason = KVM_EXIT_MMIO;
+	vcpu->run->mmio.phys_addr = vcpu->mmio_phys_addr = gpa;
+	vcpu->run->mmio.len = vcpu->mmio_size = bytes;
+	vcpu->run->mmio.is_write = vcpu->mmio_is_write = 1;
+	memcpy(vcpu->run->mmio.data, val, bytes);
 
 	return X86EMUL_CONTINUE;
 }
@@ -3431,6 +3506,7 @@ mmio:
 int emulator_write_emulated(unsigned long addr,
 			    const void *val,
 			    unsigned int bytes,
+			    unsigned int *error_code,
 			    struct kvm_vcpu *vcpu)
 {
 	/* Crossing a page boundary? */
@@ -3438,16 +3514,17 @@ int emulator_write_emulated(unsigned long addr,
 		int rc, now;
 
 		now = -addr & ~PAGE_MASK;
-		rc = emulator_write_emulated_onepage(addr, val, now, vcpu);
+		rc = emulator_write_emulated_onepage(addr, val, now, error_code,
+						     vcpu);
 		if (rc != X86EMUL_CONTINUE)
 			return rc;
 		addr += now;
 		val += now;
 		bytes -= now;
 	}
-	return emulator_write_emulated_onepage(addr, val, bytes, vcpu);
+	return emulator_write_emulated_onepage(addr, val, bytes, error_code,
+					       vcpu);
 }
-EXPORT_SYMBOL_GPL(emulator_write_emulated);
 
 #define CMPXCHG_TYPE(t, ptr, old, new) \
 	(cmpxchg((t *)(ptr), *(t *)(old), *(t *)(new)) == *(t *)(old))
@@ -3463,6 +3540,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 				     const void *old,
 				     const void *new,
 				     unsigned int bytes,
+				     unsigned int *error_code,
 				     struct kvm_vcpu *vcpu)
 {
 	gpa_t gpa;
@@ -3484,6 +3562,10 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 		goto emul_write;
 
 	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+	if (is_error_page(page)) {
+		kvm_release_page_clean(page);
+		goto emul_write;
+	}
 
 	kaddr = kmap_atomic(page, KM_USER0);
 	kaddr += offset_in_page(gpa);
@@ -3516,7 +3598,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 emul_write:
 	printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
 
-	return emulator_write_emulated(addr, new, bytes, vcpu);
+	return emulator_write_emulated(addr, new, bytes, error_code, vcpu);
 }
 
 static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
@@ -3604,42 +3686,38 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 	return X86EMUL_CONTINUE;
 }
 
-int emulate_clts(struct kvm_vcpu *vcpu)
+int kvm_emulate_wbinvd(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
-	kvm_x86_ops->fpu_activate(vcpu);
+	if (!need_emulate_wbinvd(vcpu))
+		return X86EMUL_CONTINUE;
+
+	if (kvm_x86_ops->has_wbinvd_exit()) {
+		smp_call_function_many(vcpu->arch.wbinvd_dirty_mask,
+				wbinvd_ipi, NULL, 1);
+		cpumask_clear(vcpu->arch.wbinvd_dirty_mask);
+	}
+	wbinvd();
 	return X86EMUL_CONTINUE;
 }
+EXPORT_SYMBOL_GPL(kvm_emulate_wbinvd);
 
-int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long *dest)
+int emulate_clts(struct kvm_vcpu *vcpu)
 {
-	return kvm_get_dr(ctxt->vcpu, dr, dest);
+	kvm_x86_ops->set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
+	kvm_x86_ops->fpu_activate(vcpu);
+	return X86EMUL_CONTINUE;
 }
 
-int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
+int emulator_get_dr(int dr, unsigned long *dest, struct kvm_vcpu *vcpu)
 {
-	unsigned long mask = (ctxt->mode == X86EMUL_MODE_PROT64) ? ~0ULL : ~0U;
-
-	return kvm_set_dr(ctxt->vcpu, dr, value & mask);
+	return _kvm_get_dr(vcpu, dr, dest);
 }
 
-void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
+int emulator_set_dr(int dr, unsigned long value, struct kvm_vcpu *vcpu)
 {
-	u8 opcodes[4];
-	unsigned long rip = kvm_rip_read(vcpu);
-	unsigned long rip_linear;
-
-	if (!printk_ratelimit())
-		return;
 
-	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
-
-	kvm_read_guest_virt(rip_linear, (void *)opcodes, 4, vcpu, NULL);
-
-	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
-	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
+	return __kvm_set_dr(vcpu, dr, value);
 }
-EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
 static u64 mk_cr_64(u64 curr_cr, u32 new_val)
 {
@@ -3674,27 +3752,32 @@ static unsigned long emulator_get_cr(int cr, struct kvm_vcpu *vcpu)
 	return value;
 }
 
-static void emulator_set_cr(int cr, unsigned long val, struct kvm_vcpu *vcpu)
+static int emulator_set_cr(int cr, unsigned long val, struct kvm_vcpu *vcpu)
 {
+	int res = 0;
+
 	switch (cr) {
 	case 0:
-		kvm_set_cr0(vcpu, mk_cr_64(kvm_read_cr0(vcpu), val));
+		res = kvm_set_cr0(vcpu, mk_cr_64(kvm_read_cr0(vcpu), val));
 		break;
 	case 2:
 		vcpu->arch.cr2 = val;
 		break;
 	case 3:
-		kvm_set_cr3(vcpu, val);
+		res = kvm_set_cr3(vcpu, val);
 		break;
 	case 4:
-		kvm_set_cr4(vcpu, mk_cr_64(kvm_read_cr4(vcpu), val));
+		res = kvm_set_cr4(vcpu, mk_cr_64(kvm_read_cr4(vcpu), val));
 		break;
 	case 8:
-		kvm_set_cr8(vcpu, val & 0xfUL);
+		res = __kvm_set_cr8(vcpu, val & 0xfUL);
 		break;
 	default:
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
+		res = -1;
 	}
+
+	return res;
 }
 
 static int emulator_get_cpl(struct kvm_vcpu *vcpu)
@@ -3707,6 +3790,12 @@ static void emulator_get_gdt(struct desc_ptr *dt, struct kvm_vcpu *vcpu)
 	kvm_x86_ops->get_gdt(vcpu, dt);
 }
 
+static unsigned long emulator_get_cached_segment_base(int seg,
+						      struct kvm_vcpu *vcpu)
+{
+	return get_segment_base(vcpu, seg);
+}
+
 static bool emulator_get_cached_descriptor(struct desc_struct *desc, int seg,
 					   struct kvm_vcpu *vcpu)
 {
@@ -3779,11 +3868,6 @@ static void emulator_set_segment_selector(u16 sel, int seg,
 	kvm_set_segment(vcpu, &kvm_seg, seg);
 }
 
-static void emulator_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
-{
-	kvm_x86_ops->set_rflags(vcpu, rflags);
-}
-
 static struct x86_emulate_ops emulate_ops = {
 	.read_std            = kvm_read_guest_virt_system,
 	.write_std           = kvm_write_guest_virt_system,
@@ -3797,11 +3881,15 @@ static struct x86_emulate_ops emulate_ops = {
 	.set_cached_descriptor = emulator_set_cached_descriptor,
 	.get_segment_selector = emulator_get_segment_selector,
 	.set_segment_selector = emulator_set_segment_selector,
+	.get_cached_segment_base = emulator_get_cached_segment_base,
 	.get_gdt             = emulator_get_gdt,
 	.get_cr              = emulator_get_cr,
 	.set_cr              = emulator_set_cr,
 	.cpl                 = emulator_get_cpl,
-	.set_rflags          = emulator_set_rflags,
+	.get_dr              = emulator_get_dr,
+	.set_dr              = emulator_set_dr,
+	.set_msr             = kvm_set_msr,
+	.get_msr             = kvm_get_msr,
 };
 
 static void cache_all_regs(struct kvm_vcpu *vcpu)
@@ -3812,14 +3900,75 @@ static void cache_all_regs(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs_dirty = ~0;
 }
 
+static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)
+{
+	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(vcpu, mask);
+	/*
+	 * an sti; sti; sequence only disable interrupts for the first
+	 * instruction. So, if the last instruction, be it emulated or
+	 * not, left the system with the INT_STI flag enabled, it
+	 * means that the last instruction is an sti. We should not
+	 * leave the flag on in this case. The same goes for mov ss
+	 */
+	if (!(int_shadow & mask))
+		kvm_x86_ops->set_interrupt_shadow(vcpu, mask);
+}
+
+static void inject_emulated_exception(struct kvm_vcpu *vcpu)
+{
+	struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt;
+	if (ctxt->exception == PF_VECTOR)
+		kvm_inject_page_fault(vcpu, ctxt->cr2, ctxt->error_code);
+	else if (ctxt->error_code_valid)
+		kvm_queue_exception_e(vcpu, ctxt->exception, ctxt->error_code);
+	else
+		kvm_queue_exception(vcpu, ctxt->exception);
+}
+
+static int handle_emulation_failure(struct kvm_vcpu *vcpu)
+{
+	++vcpu->stat.insn_emulation_fail;
+	trace_kvm_emulate_insn_failed(vcpu);
+	vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+	vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+	vcpu->run->internal.ndata = 0;
+	kvm_queue_exception(vcpu, UD_VECTOR);
+	return EMULATE_FAIL;
+}
+
+static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t gva)
+{
+	gpa_t gpa;
+
+	if (tdp_enabled)
+		return false;
+
+	/*
+	 * if emulation was due to access to shadowed page table
+	 * and it failed try to unshadow page and re-entetr the
+	 * guest to let CPU execute the instruction.
+	 */
+	if (kvm_mmu_unprotect_page_virt(vcpu, gva))
+		return true;
+
+	gpa = kvm_mmu_gva_to_gpa_system(vcpu, gva, NULL);
+
+	if (gpa == UNMAPPED_GVA)
+		return true; /* let cpu generate fault */
+
+	if (!kvm_is_error_hva(gfn_to_hva(vcpu->kvm, gpa >> PAGE_SHIFT)))
+		return true;
+
+	return false;
+}
+
 int emulate_instruction(struct kvm_vcpu *vcpu,
 			unsigned long cr2,
 			u16 error_code,
 			int emulation_type)
 {
-	int r, shadow_mask;
-	struct decode_cache *c;
-	struct kvm_run *run = vcpu->run;
+	int r;
+	struct decode_cache *c = &vcpu->arch.emulate_ctxt.decode;
 
 	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
@@ -3831,8 +3980,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 	 */
 	cache_all_regs(vcpu);
 
-	vcpu->mmio_is_write = 0;
-
 	if (!(emulation_type & EMULTYPE_NO_DECODE)) {
 		int cs_db, cs_l;
 		kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
@@ -3846,13 +3993,16 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 			? X86EMUL_MODE_VM86 : cs_l
 			? X86EMUL_MODE_PROT64 :	cs_db
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+		memset(c, 0, sizeof(struct decode_cache));
+		memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
+		vcpu->arch.emulate_ctxt.interruptibility = 0;
+		vcpu->arch.emulate_ctxt.exception = -1;
 
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 		trace_kvm_emulate_insn_start(vcpu);
 
 		/* Only allow emulation of specific instructions on #UD
 		 * (namely VMMCALL, sysenter, sysexit, syscall)*/
-		c = &vcpu->arch.emulate_ctxt.decode;
 		if (emulation_type & EMULTYPE_TRAP_UD) {
 			if (!c->twobyte)
 				return EMULATE_FAIL;
@@ -3880,11 +4030,11 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 
 		++vcpu->stat.insn_emulation;
 		if (r)  {
-			++vcpu->stat.insn_emulation_fail;
-			trace_kvm_emulate_insn_failed(vcpu);
-			if (kvm_mmu_unprotect_page_virt(vcpu, cr2))
+			if (reexecute_instruction(vcpu, cr2))
 				return EMULATE_DONE;
-			return EMULATE_FAIL;
+			if (emulation_type & EMULTYPE_SKIP)
+				return EMULATE_FAIL;
+			return handle_emulation_failure(vcpu);
 		}
 	}
 
@@ -3893,48 +4043,42 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		return EMULATE_DONE;
 	}
 
+	/* this is needed for vmware backdor interface to work since it
+	   changes registers values  during IO operation */
+	memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
+
 restart:
 	r = x86_emulate_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
-	shadow_mask = vcpu->arch.emulate_ctxt.interruptibility;
 
-	if (r == 0)
-		kvm_x86_ops->set_interrupt_shadow(vcpu, shadow_mask);
+	if (r) { /* emulation failed */
+		if (reexecute_instruction(vcpu, cr2))
+			return EMULATE_DONE;
 
-	if (vcpu->arch.pio.count) {
-		if (!vcpu->arch.pio.in)
-			vcpu->arch.pio.count = 0;
-		return EMULATE_DO_MMIO;
+		return handle_emulation_failure(vcpu);
 	}
 
-	if (r || vcpu->mmio_is_write) {
-		run->exit_reason = KVM_EXIT_MMIO;
-		run->mmio.phys_addr = vcpu->mmio_phys_addr;
-		memcpy(run->mmio.data, vcpu->mmio_data, 8);
-		run->mmio.len = vcpu->mmio_size;
-		run->mmio.is_write = vcpu->mmio_is_write;
+	toggle_interruptibility(vcpu, vcpu->arch.emulate_ctxt.interruptibility);
+	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
+	memcpy(vcpu->arch.regs, c->regs, sizeof c->regs);
+	kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.eip);
+
+	if (vcpu->arch.emulate_ctxt.exception >= 0) {
+		inject_emulated_exception(vcpu);
+		return EMULATE_DONE;
 	}
 
-	if (r) {
-		if (kvm_mmu_unprotect_page_virt(vcpu, cr2))
-			goto done;
-		if (!vcpu->mmio_needed) {
-			++vcpu->stat.insn_emulation_fail;
-			trace_kvm_emulate_insn_failed(vcpu);
-			kvm_report_emulation_failure(vcpu, "mmio");
-			return EMULATE_FAIL;
-		}
+	if (vcpu->arch.pio.count) {
+		if (!vcpu->arch.pio.in)
+			vcpu->arch.pio.count = 0;
 		return EMULATE_DO_MMIO;
 	}
 
-	if (vcpu->mmio_is_write) {
-		vcpu->mmio_needed = 0;
+	if (vcpu->mmio_needed) {
+		if (vcpu->mmio_is_write)
+			vcpu->mmio_needed = 0;
 		return EMULATE_DO_MMIO;
 	}
 
-done:
-	if (vcpu->arch.exception.pending)
-		vcpu->arch.emulate_ctxt.restart = false;
-
 	if (vcpu->arch.emulate_ctxt.restart)
 		goto restart;
 
@@ -4108,6 +4252,9 @@ int kvm_arch_init(void *opaque)
 
 	perf_register_guest_info_callbacks(&kvm_guest_cbs);
 
+	if (cpu_has_xsave)
+		host_xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
+
 	return 0;
 
 out:
@@ -4270,7 +4417,7 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu)
 
 	kvm_x86_ops->patch_hypercall(vcpu, instruction);
 
-	return emulator_write_emulated(rip, instruction, 3, vcpu);
+	return emulator_write_emulated(rip, instruction, 3, NULL, vcpu);
 }
 
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 limit, unsigned long base)
@@ -4506,59 +4653,78 @@ static void inject_pending_event(struct kvm_vcpu *vcpu)
 	}
 }
 
+static void kvm_load_guest_xcr0(struct kvm_vcpu *vcpu)
+{
+	if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE) &&
+			!vcpu->guest_xcr0_loaded) {
+		/* kvm_set_xcr() also depends on this */
+		xsetbv(XCR_XFEATURE_ENABLED_MASK, vcpu->arch.xcr0);
+		vcpu->guest_xcr0_loaded = 1;
+	}
+}
+
+static void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->guest_xcr0_loaded) {
+		if (vcpu->arch.xcr0 != host_xcr0)
+			xsetbv(XCR_XFEATURE_ENABLED_MASK, host_xcr0);
+		vcpu->guest_xcr0_loaded = 0;
+	}
+}
+
 static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 {
 	int r;
 	bool req_int_win = !irqchip_in_kernel(vcpu->kvm) &&
 		vcpu->run->request_interrupt_window;
 
-	if (vcpu->requests)
-		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
-			kvm_mmu_unload(vcpu);
-
-	r = kvm_mmu_reload(vcpu);
-	if (unlikely(r))
-		goto out;
-
 	if (vcpu->requests) {
-		if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
+		if (kvm_check_request(KVM_REQ_MMU_RELOAD, vcpu))
+			kvm_mmu_unload(vcpu);
+		if (kvm_check_request(KVM_REQ_MIGRATE_TIMER, vcpu))
 			__kvm_migrate_timers(vcpu);
-		if (test_and_clear_bit(KVM_REQ_KVMCLOCK_UPDATE, &vcpu->requests))
+		if (kvm_check_request(KVM_REQ_KVMCLOCK_UPDATE, vcpu))
 			kvm_write_guest_time(vcpu);
-		if (test_and_clear_bit(KVM_REQ_MMU_SYNC, &vcpu->requests))
+		if (kvm_check_request(KVM_REQ_MMU_SYNC, vcpu))
 			kvm_mmu_sync_roots(vcpu);
-		if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
+		if (kvm_check_request(KVM_REQ_TLB_FLUSH, vcpu))
 			kvm_x86_ops->tlb_flush(vcpu);
-		if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
-				       &vcpu->requests)) {
+		if (kvm_check_request(KVM_REQ_REPORT_TPR_ACCESS, vcpu)) {
 			vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
 			r = 0;
 			goto out;
 		}
-		if (test_and_clear_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests)) {
+		if (kvm_check_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
 			vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 			r = 0;
 			goto out;
 		}
-		if (test_and_clear_bit(KVM_REQ_DEACTIVATE_FPU, &vcpu->requests)) {
+		if (kvm_check_request(KVM_REQ_DEACTIVATE_FPU, vcpu)) {
 			vcpu->fpu_active = 0;
 			kvm_x86_ops->fpu_deactivate(vcpu);
 		}
 	}
 
+	r = kvm_mmu_reload(vcpu);
+	if (unlikely(r))
+		goto out;
+
 	preempt_disable();
 
 	kvm_x86_ops->prepare_guest_switch(vcpu);
 	if (vcpu->fpu_active)
 		kvm_load_guest_fpu(vcpu);
+	kvm_load_guest_xcr0(vcpu);
 
-	local_irq_disable();
+	atomic_set(&vcpu->guest_mode, 1);
+	smp_wmb();
 
-	clear_bit(KVM_REQ_KICK, &vcpu->requests);
-	smp_mb__after_clear_bit();
+	local_irq_disable();
 
-	if (vcpu->requests || need_resched() || signal_pending(current)) {
-		set_bit(KVM_REQ_KICK, &vcpu->requests);
+	if (!atomic_read(&vcpu->guest_mode) || vcpu->requests
+	    || need_resched() || signal_pending(current)) {
+		atomic_set(&vcpu->guest_mode, 0);
+		smp_wmb();
 		local_irq_enable();
 		preempt_enable();
 		r = 1;
@@ -4603,7 +4769,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	if (hw_breakpoint_active())
 		hw_breakpoint_restore();
 
-	set_bit(KVM_REQ_KICK, &vcpu->requests);
+	atomic_set(&vcpu->guest_mode, 0);
+	smp_wmb();
 	local_irq_enable();
 
 	++vcpu->stat.exits;
@@ -4665,7 +4832,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 			srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 			kvm_vcpu_block(vcpu);
 			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
-			if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+			if (kvm_check_request(KVM_REQ_UNHALT, vcpu))
 			{
 				switch(vcpu->arch.mp_state) {
 				case KVM_MP_STATE_HALTED:
@@ -4717,8 +4884,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	int r;
 	sigset_t sigsaved;
 
-	vcpu_load(vcpu);
-
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
@@ -4743,7 +4908,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
 		r = emulate_instruction(vcpu, 0, 0, EMULTYPE_NO_DECODE);
 		srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
-		if (r == EMULATE_DO_MMIO) {
+		if (r != EMULATE_DONE) {
 			r = 0;
 			goto out;
 		}
@@ -4759,14 +4924,11 @@ out:
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	vcpu_put(vcpu);
 	return r;
 }
 
 int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
-	vcpu_load(vcpu);
-
 	regs->rax = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	regs->rbx = kvm_register_read(vcpu, VCPU_REGS_RBX);
 	regs->rcx = kvm_register_read(vcpu, VCPU_REGS_RCX);
@@ -4789,15 +4951,11 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	regs->rip = kvm_rip_read(vcpu);
 	regs->rflags = kvm_get_rflags(vcpu);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
-	vcpu_load(vcpu);
-
 	kvm_register_write(vcpu, VCPU_REGS_RAX, regs->rax);
 	kvm_register_write(vcpu, VCPU_REGS_RBX, regs->rbx);
 	kvm_register_write(vcpu, VCPU_REGS_RCX, regs->rcx);
@@ -4822,8 +4980,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 
 	vcpu->arch.exception.pending = false;
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -4842,8 +4998,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 {
 	struct desc_ptr dt;
 
-	vcpu_load(vcpu);
-
 	kvm_get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
 	kvm_get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
 	kvm_get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
@@ -4875,32 +5029,27 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 		set_bit(vcpu->arch.interrupt.nr,
 			(unsigned long *)sregs->interrupt_bitmap);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	vcpu_load(vcpu);
 	mp_state->mp_state = vcpu->arch.mp_state;
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	vcpu_load(vcpu);
 	vcpu->arch.mp_state = mp_state->mp_state;
-	vcpu_put(vcpu);
 	return 0;
 }
 
 int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
 		    bool has_error_code, u32 error_code)
 {
+	struct decode_cache *c = &vcpu->arch.emulate_ctxt.decode;
 	int cs_db, cs_l, ret;
 	cache_all_regs(vcpu);
 
@@ -4915,6 +5064,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
 		? X86EMUL_MODE_VM86 : cs_l
 		? X86EMUL_MODE_PROT64 :	cs_db
 		? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+	memset(c, 0, sizeof(struct decode_cache));
+	memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
 
 	ret = emulator_task_switch(&vcpu->arch.emulate_ctxt, &emulate_ops,
 				   tss_selector, reason, has_error_code,
@@ -4923,6 +5074,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
 	if (ret)
 		return EMULATE_FAIL;
 
+	memcpy(vcpu->arch.regs, c->regs, sizeof c->regs);
+	kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.eip);
 	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
 	return EMULATE_DONE;
 }
@@ -4935,8 +5088,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	int pending_vec, max_bits;
 	struct desc_ptr dt;
 
-	vcpu_load(vcpu);
-
 	dt.size = sregs->idt.limit;
 	dt.address = sregs->idt.base;
 	kvm_x86_ops->set_idt(vcpu, &dt);
@@ -4996,8 +5147,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	    !is_protmode(vcpu))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
@@ -5007,12 +5156,10 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	unsigned long rflags;
 	int i, r;
 
-	vcpu_load(vcpu);
-
 	if (dbg->control & (KVM_GUESTDBG_INJECT_DB | KVM_GUESTDBG_INJECT_BP)) {
 		r = -EBUSY;
 		if (vcpu->arch.exception.pending)
-			goto unlock_out;
+			goto out;
 		if (dbg->control & KVM_GUESTDBG_INJECT_DB)
 			kvm_queue_exception(vcpu, DB_VECTOR);
 		else
@@ -5054,34 +5201,12 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 
 	r = 0;
 
-unlock_out:
-	vcpu_put(vcpu);
+out:
 
 	return r;
 }
 
 /*
- * fxsave fpu state.  Taken from x86_64/processor.h.  To be killed when
- * we have asm/x86/processor.h
- */
-struct fxsave {
-	u16	cwd;
-	u16	swd;
-	u16	twd;
-	u16	fop;
-	u64	rip;
-	u64	rdp;
-	u32	mxcsr;
-	u32	mxcsr_mask;
-	u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
-#ifdef CONFIG_X86_64
-	u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 256 bytes */
-#else
-	u32	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
-#endif
-};
-
-/*
  * Translate a guest virtual address to a guest physical address.
  */
 int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
@@ -5091,7 +5216,6 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	gpa_t gpa;
 	int idx;
 
-	vcpu_load(vcpu);
 	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	gpa = kvm_mmu_gva_to_gpa_system(vcpu, vaddr, NULL);
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
@@ -5099,16 +5223,14 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	tr->valid = gpa != UNMAPPED_GVA;
 	tr->writeable = 1;
 	tr->usermode = 0;
-	vcpu_put(vcpu);
 
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
-	struct fxsave *fxsave = (struct fxsave *)&vcpu->arch.guest_fx_image;
-
-	vcpu_load(vcpu);
+	struct i387_fxsave_struct *fxsave =
+			&vcpu->arch.guest_fpu.state->fxsave;
 
 	memcpy(fpu->fpr, fxsave->st_space, 128);
 	fpu->fcw = fxsave->cwd;
@@ -5119,16 +5241,13 @@ int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 	fpu->last_dp = fxsave->rdp;
 	memcpy(fpu->xmm, fxsave->xmm_space, sizeof fxsave->xmm_space);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
-	struct fxsave *fxsave = (struct fxsave *)&vcpu->arch.guest_fx_image;
-
-	vcpu_load(vcpu);
+	struct i387_fxsave_struct *fxsave =
+			&vcpu->arch.guest_fpu.state->fxsave;
 
 	memcpy(fxsave->st_space, fpu->fpr, 128);
 	fxsave->cwd = fpu->fcw;
@@ -5139,61 +5258,63 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 	fxsave->rdp = fpu->last_dp;
 	memcpy(fxsave->xmm_space, fpu->xmm, sizeof fxsave->xmm_space);
 
-	vcpu_put(vcpu);
-
 	return 0;
 }
 
-void fx_init(struct kvm_vcpu *vcpu)
+int fx_init(struct kvm_vcpu *vcpu)
 {
-	unsigned after_mxcsr_mask;
+	int err;
+
+	err = fpu_alloc(&vcpu->arch.guest_fpu);
+	if (err)
+		return err;
+
+	fpu_finit(&vcpu->arch.guest_fpu);
 
 	/*
-	 * Touch the fpu the first time in non atomic context as if
-	 * this is the first fpu instruction the exception handler
-	 * will fire before the instruction returns and it'll have to
-	 * allocate ram with GFP_KERNEL.
+	 * Ensure guest xcr0 is valid for loading
 	 */
-	if (!used_math())
-		kvm_fx_save(&vcpu->arch.host_fx_image);
-
-	/* Initialize guest FPU by resetting ours and saving into guest's */
-	preempt_disable();
-	kvm_fx_save(&vcpu->arch.host_fx_image);
-	kvm_fx_finit();
-	kvm_fx_save(&vcpu->arch.guest_fx_image);
-	kvm_fx_restore(&vcpu->arch.host_fx_image);
-	preempt_enable();
+	vcpu->arch.xcr0 = XSTATE_FP;
 
 	vcpu->arch.cr0 |= X86_CR0_ET;
-	after_mxcsr_mask = offsetof(struct i387_fxsave_struct, st_space);
-	vcpu->arch.guest_fx_image.mxcsr = 0x1f80;
-	memset((void *)&vcpu->arch.guest_fx_image + after_mxcsr_mask,
-	       0, sizeof(struct i387_fxsave_struct) - after_mxcsr_mask);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(fx_init);
 
+static void fx_free(struct kvm_vcpu *vcpu)
+{
+	fpu_free(&vcpu->arch.guest_fpu);
+}
+
 void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 {
 	if (vcpu->guest_fpu_loaded)
 		return;
 
+	/*
+	 * Restore all possible states in the guest,
+	 * and assume host would use all available bits.
+	 * Guest xcr0 would be loaded later.
+	 */
+	kvm_put_guest_xcr0(vcpu);
 	vcpu->guest_fpu_loaded = 1;
-	kvm_fx_save(&vcpu->arch.host_fx_image);
-	kvm_fx_restore(&vcpu->arch.guest_fx_image);
+	unlazy_fpu(current);
+	fpu_restore_checking(&vcpu->arch.guest_fpu);
 	trace_kvm_fpu(1);
 }
 
 void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
+	kvm_put_guest_xcr0(vcpu);
+
 	if (!vcpu->guest_fpu_loaded)
 		return;
 
 	vcpu->guest_fpu_loaded = 0;
-	kvm_fx_save(&vcpu->arch.guest_fx_image);
-	kvm_fx_restore(&vcpu->arch.host_fx_image);
+	fpu_save_init(&vcpu->arch.guest_fpu);
 	++vcpu->stat.fpu_reload;
-	set_bit(KVM_REQ_DEACTIVATE_FPU, &vcpu->requests);
+	kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
 	trace_kvm_fpu(0);
 }
 
@@ -5204,6 +5325,8 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 		vcpu->arch.time_page = NULL;
 	}
 
+	free_cpumask_var(vcpu->arch.wbinvd_dirty_mask);
+	fx_free(vcpu);
 	kvm_x86_ops->vcpu_free(vcpu);
 }
 
@@ -5217,9 +5340,6 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	int r;
 
-	/* We do fxsave: this must be aligned. */
-	BUG_ON((unsigned long)&vcpu->arch.host_fx_image & 0xF);
-
 	vcpu->arch.mtrr_state.have_fixed = 1;
 	vcpu_load(vcpu);
 	r = kvm_arch_vcpu_reset(vcpu);
@@ -5241,6 +5361,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 	kvm_mmu_unload(vcpu);
 	vcpu_put(vcpu);
 
+	fx_free(vcpu);
 	kvm_x86_ops->vcpu_free(vcpu);
 }
 
@@ -5334,7 +5455,12 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	}
 	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
 
+	if (!zalloc_cpumask_var(&vcpu->arch.wbinvd_dirty_mask, GFP_KERNEL))
+		goto fail_free_mce_banks;
+
 	return 0;
+fail_free_mce_banks:
+	kfree(vcpu->arch.mce_banks);
 fail_free_lapic:
 	kvm_free_lapic(vcpu);
 fail_mmu_destroy:
@@ -5364,12 +5490,6 @@ struct  kvm *kvm_arch_create_vm(void)
 	if (!kvm)
 		return ERR_PTR(-ENOMEM);
 
-	kvm->arch.aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
-	if (!kvm->arch.aliases) {
-		kfree(kvm);
-		return ERR_PTR(-ENOMEM);
-	}
-
 	INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
 	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
 
@@ -5412,12 +5532,12 @@ static void kvm_free_vcpus(struct kvm *kvm)
 void kvm_arch_sync_events(struct kvm *kvm)
 {
 	kvm_free_all_assigned_devices(kvm);
+	kvm_free_pit(kvm);
 }
 
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvm_iommu_unmap_guest(kvm);
-	kvm_free_pit(kvm);
 	kfree(kvm->arch.vpic);
 	kfree(kvm->arch.vioapic);
 	kvm_free_vcpus(kvm);
@@ -5427,7 +5547,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (kvm->arch.ept_identity_pagetable)
 		put_page(kvm->arch.ept_identity_pagetable);
 	cleanup_srcu_struct(&kvm->srcu);
-	kfree(kvm->arch.aliases);
 	kfree(kvm);
 }
 
@@ -5438,6 +5557,11 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				int user_alloc)
 {
 	int npages = memslot->npages;
+	int map_flags = MAP_PRIVATE | MAP_ANONYMOUS;
+
+	/* Prevent internal slot pages from being moved by fork()/COW. */
+	if (memslot->id >= KVM_MEMORY_SLOTS)
+		map_flags = MAP_SHARED | MAP_ANONYMOUS;
 
 	/*To keep backward compatibility with older userspace,
 	 *x86 needs to hanlde !user_alloc case.
@@ -5450,7 +5574,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 			userspace_addr = do_mmap(NULL, 0,
 						 npages * PAGE_SIZE,
 						 PROT_READ | PROT_WRITE,
-						 MAP_PRIVATE | MAP_ANONYMOUS,
+						 map_flags,
 						 0);
 			up_write(&current->mm->mmap_sem);
 
@@ -5523,7 +5647,7 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 
 	me = get_cpu();
 	if (cpu != me && (unsigned)cpu < nr_cpu_ids && cpu_online(cpu))
-		if (!test_and_set_bit(KVM_REQ_KICK, &vcpu->requests))
+		if (atomic_xchg(&vcpu->guest_mode, 0))
 			smp_send_reschedule(cpu);
 	put_cpu();
 }
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index f4b54458285..b7a404722d2 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -65,13 +65,6 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
 }
 
-static inline struct kvm_mem_aliases *kvm_aliases(struct kvm *kvm)
-{
-	return rcu_dereference_check(kvm->arch.aliases,
-			srcu_read_lock_held(&kvm->srcu)
-			|| lockdep_is_held(&kvm->slots_lock));
-}
-
 void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 550df481acc..787c52ca49c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -3,12 +3,6 @@
 #include <linux/module.h>
 #include <linux/bootmem.h>
 
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
-#else
-# define DBG(x...)
-#endif
-
 /*
  * Which logical CPUs are on which nodes
  */
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index acc15b23b74..64121a18b8c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -302,7 +302,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return -EINVAL;
 	}
 
-	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	new  = kzalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index f537087bb74..8acaddd0fb2 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -34,8 +34,7 @@
  * memtype_lock protects the rbtree.
  */
 
-static void memtype_rb_augment_cb(struct rb_node *node);
-static struct rb_root memtype_rbroot = RB_AUGMENT_ROOT(&memtype_rb_augment_cb);
+static struct rb_root memtype_rbroot = RB_ROOT;
 
 static int is_node_overlap(struct memtype *node, u64 start, u64 end)
 {
@@ -56,7 +55,7 @@ static u64 get_subtree_max_end(struct rb_node *node)
 }
 
 /* Update 'subtree_max_end' for a node, based on node and its children */
-static void update_node_max_end(struct rb_node *node)
+static void memtype_rb_augment_cb(struct rb_node *node, void *__unused)
 {
 	struct memtype *data;
 	u64 max_end, child_max_end;
@@ -78,25 +77,6 @@ static void update_node_max_end(struct rb_node *node)
 	data->subtree_max_end = max_end;
 }
 
-/* Update 'subtree_max_end' for a node and all its ancestors */
-static void update_path_max_end(struct rb_node *node)
-{
-	u64 old_max_end, new_max_end;
-
-	while (node) {
-		struct memtype *data = container_of(node, struct memtype, rb);
-
-		old_max_end = data->subtree_max_end;
-		update_node_max_end(node);
-		new_max_end = data->subtree_max_end;
-
-		if (new_max_end == old_max_end)
-			break;
-
-		node = rb_parent(node);
-	}
-}
-
 /* Find the first (lowest start addr) overlapping range from rb tree */
 static struct memtype *memtype_rb_lowest_match(struct rb_root *root,
 				u64 start, u64 end)
@@ -190,12 +170,6 @@ failure:
 	return -EBUSY;
 }
 
-static void memtype_rb_augment_cb(struct rb_node *node)
-{
-	if (node)
-		update_path_max_end(node);
-}
-
 static void memtype_rb_insert(struct rb_root *root, struct memtype *newdata)
 {
 	struct rb_node **node = &(root->rb_node);
@@ -213,6 +187,7 @@ static void memtype_rb_insert(struct rb_root *root, struct memtype *newdata)
 
 	rb_link_node(&newdata->rb, parent, node);
 	rb_insert_color(&newdata->rb, root);
+	rb_augment_insert(&newdata->rb, memtype_rb_augment_cb, NULL);
 }
 
 int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
@@ -226,6 +201,7 @@ int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
 		if (ret_type)
 			new->type = *ret_type;
 
+		new->subtree_max_end = new->end;
 		memtype_rb_insert(&memtype_rbroot, new);
 	}
 	return err;
@@ -233,13 +209,16 @@ int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
 
 struct memtype *rbt_memtype_erase(u64 start, u64 end)
 {
+	struct rb_node *deepest;
 	struct memtype *data;
 
 	data = memtype_rb_exact_match(&memtype_rbroot, start, end);
 	if (!data)
 		goto out;
 
+	deepest = rb_augment_erase_begin(&data->rb);
 	rb_erase(&data->rb, &memtype_rbroot);
+	rb_augment_erase_end(deepest, memtype_rb_augment_cb, NULL);
 out:
 	return data;
 }
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 97da2ba9344..55253095be8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -96,6 +96,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  *	  the fact the PCI specs explicitly allow address decoders to be
  *	  shared between expansion ROMs and other resource regions, it's
  *	  at least dangerous)
+ *	- bad resource sizes or overlaps with other regions
  *
  *  Our solution:
  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
@@ -136,6 +137,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					 * child resource allocations in this
 					 * range.
 					 */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
@@ -182,6 +184,7 @@ static void __init pcibios_allocate_resources(int pass)
 					idx, r, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
 					/* We'll assign a new address later */
+					dev->fw_addr[idx] = r->start;
 					r->end -= r->start;
 					r->start = 0;
 				}
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 0db5eaf5456..8d460eaf524 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -11,28 +11,14 @@
  */
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
-	int n, devfn;
-	long node;
+	int n;
 
 	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
-	for (n=0; n <= pcibios_last_bus; n++) {
-		u32 l;
-		if (pci_find_bus(0, n))
-			continue;
-		node = get_mp_bus_to_node(n);
-		for (devfn = 0; devfn < 256; devfn += 8) {
-			if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
-			    l != 0x0000 && l != 0xffff) {
-				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
-				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus_on_node(n, &pci_root_ops, node);
-				break;
-			}
-		}
-	}
+	for (n=0; n <= pcibios_last_bus; n++)
+		pcibios_scan_specific_bus(n);
 }
 
 int __init pci_legacy_init(void)
@@ -50,6 +36,28 @@ int __init pci_legacy_init(void)
 	return 0;
 }
 
+void pcibios_scan_specific_bus(int busn)
+{
+	int devfn;
+	long node;
+	u32 l;
+
+	if (pci_find_bus(0, busn))
+		return;
+
+	node = get_mp_bus_to_node(busn);
+	for (devfn = 0; devfn < 256; devfn += 8) {
+		if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
+		    l != 0x0000 && l != 0xffff) {
+			DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
+			printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
+			pci_scan_bus_on_node(busn, &pci_root_ops, node);
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus);
+
 int __init pci_subsys_init(void)
 {
 	/*
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 7ef3a2735df..cb29191cee5 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -66,8 +66,9 @@ static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
 					  devfn, pos, 4, &pcie_cap))
 			return 0;
 
-		if (pcie_cap == 0xffffffff)
-			return 0;
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
 
 		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
 			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
@@ -76,7 +77,7 @@ static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
 				return pos;
 		}
 
-		pos = pcie_cap >> 20;
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
 	}
 
 	return 0;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 0a979f3e5b8..1290ba54b35 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -105,6 +105,8 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
 #endif
+	ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
+					       &ctxt->misc_enable);
 }
 
 /* Needed by apm.c */
@@ -152,6 +154,8 @@ static void fix_processor_context(void)
  */
 static void __restore_processor_state(struct saved_context *ctxt)
 {
+	if (ctxt->misc_enable_saved)
+		wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
 	/*
 	 * control registers
 	 */
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 987267f79bf..a9c66110803 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -60,6 +60,6 @@ static void xen_vcpu_notify_restore(void *data)
 
 void xen_arch_resume(void)
 {
-	smp_call_function(xen_vcpu_notify_restore,
-			       (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
+	on_each_cpu(xen_vcpu_notify_restore,
+		    (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
 }
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bc0733359a8..e367e302643 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -105,7 +105,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -146,15 +145,10 @@ bad_area:
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	bad_page_fault(regs, address, SIGKILL);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
 	return;
 
 do_sigbus:
diff --git a/block/blk-core.c b/block/blk-core.c
index 3bc5579d6f5..f0640d7f800 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -467,6 +467,9 @@ static int blk_init_free_list(struct request_queue *q)
 {
 	struct request_list *rl = &q->rq;
 
+	if (unlikely(rl->rq_pool))
+		return 0;
+
 	rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
 	rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
 	rl->elvpriv = 0;
@@ -570,9 +573,17 @@ EXPORT_SYMBOL(blk_init_queue);
 struct request_queue *
 blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 {
-	struct request_queue *q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+	struct request_queue *uninit_q, *q;
+
+	uninit_q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+	if (!uninit_q)
+		return NULL;
+
+	q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
+	if (!q)
+		blk_cleanup_queue(uninit_q);
 
-	return blk_init_allocated_queue_node(q, rfn, lock, node_id);
+	return q;
 }
 EXPORT_SYMBOL(blk_init_queue_node);
 
@@ -592,10 +603,8 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
 		return NULL;
 
 	q->node = node_id;
-	if (blk_init_free_list(q)) {
-		kmem_cache_free(blk_requestq_cachep, q);
+	if (blk_init_free_list(q))
 		return NULL;
-	}
 
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
@@ -618,7 +627,6 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
 		return q;
 	}
 
-	blk_put_queue(q);
 	return NULL;
 }
 EXPORT_SYMBOL(blk_init_allocated_queue_node);
@@ -1141,13 +1149,10 @@ void init_request_from_bio(struct request *req, struct bio *bio)
 	else
 		req->cmd_flags |= bio->bi_rw & REQ_FAILFAST_MASK;
 
-	if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+	if (bio_rw_flagged(bio, BIO_RW_DISCARD))
 		req->cmd_flags |= REQ_DISCARD;
-		if (bio_rw_flagged(bio, BIO_RW_BARRIER))
-			req->cmd_flags |= REQ_SOFTBARRIER;
-	} else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
+	if (bio_rw_flagged(bio, BIO_RW_BARRIER))
 		req->cmd_flags |= REQ_HARDBARRIER;
-
 	if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
 		req->cmd_flags |= REQ_RW_SYNC;
 	if (bio_rw_flagged(bio, BIO_RW_META))
@@ -1578,7 +1583,7 @@ void submit_bio(int rw, struct bio *bio)
 	 * If it's a regular read/write or a barrier with data attached,
 	 * go through the normal accounting stuff before submission.
 	 */
-	if (bio_has_data(bio)) {
+	if (bio_has_data(bio) && !(rw & (1 << BIO_RW_DISCARD))) {
 		if (rw & WRITE) {
 			count_vm_events(PGPGOUT, count);
 		} else {
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index ed897b5ef31..7982b830db5 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -14,7 +14,7 @@
 #include <linux/rbtree.h>
 #include <linux/ioprio.h>
 #include <linux/blktrace_api.h>
-#include "blk-cgroup.h"
+#include "cfq.h"
 
 /*
  * tunables
@@ -64,6 +64,9 @@ static DEFINE_PER_CPU(unsigned long, cfq_ioc_count);
 static struct completion *ioc_gone;
 static DEFINE_SPINLOCK(ioc_gone_lock);
 
+static DEFINE_SPINLOCK(cic_index_lock);
+static DEFINE_IDA(cic_index_ida);
+
 #define CFQ_PRIO_LISTS		IOPRIO_BE_NR
 #define cfq_class_idle(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
 #define cfq_class_rt(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
@@ -271,6 +274,7 @@ struct cfq_data {
 	unsigned int cfq_latency;
 	unsigned int cfq_group_isolation;
 
+	unsigned int cic_index;
 	struct list_head cic_list;
 
 	/*
@@ -430,6 +434,24 @@ static inline void cic_set_cfqq(struct cfq_io_context *cic,
 	cic->cfqq[is_sync] = cfqq;
 }
 
+#define CIC_DEAD_KEY	1ul
+#define CIC_DEAD_INDEX_SHIFT	1
+
+static inline void *cfqd_dead_key(struct cfq_data *cfqd)
+{
+	return (void *)(cfqd->cic_index << CIC_DEAD_INDEX_SHIFT | CIC_DEAD_KEY);
+}
+
+static inline struct cfq_data *cic_to_cfqd(struct cfq_io_context *cic)
+{
+	struct cfq_data *cfqd = cic->key;
+
+	if (unlikely((unsigned long) cfqd & CIC_DEAD_KEY))
+		return NULL;
+
+	return cfqd;
+}
+
 /*
  * We regard a request as SYNC, if it's either a read or has the SYNC bit
  * set (in which case it could also be direct WRITE).
@@ -857,7 +879,7 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
 	cfqg->saved_workload_slice = 0;
-	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+	cfq_blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
 }
 
 static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -917,8 +939,8 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
-	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
-	blkiocg_set_start_empty_time(&cfqg->blkg);
+	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
+	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
 }
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -973,7 +995,7 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
 
 	/* Add group onto cgroup list */
 	sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
-	blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+	cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
 					MKDEV(major, minor));
 	cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
 
@@ -1057,7 +1079,7 @@ static void cfq_release_cfq_groups(struct cfq_data *cfqd)
 		 * it from cgroup list, then it will take care of destroying
 		 * cfqg also.
 		 */
-		if (!blkiocg_del_blkio_group(&cfqg->blkg))
+		if (!cfq_blkiocg_del_blkio_group(&cfqg->blkg))
 			cfq_destroy_cfqg(cfqd, cfqg);
 	}
 }
@@ -1399,10 +1421,10 @@ static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
 {
 	elv_rb_del(&cfqq->sort_list, rq);
 	cfqq->queued[rq_is_sync(rq)]--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 }
@@ -1460,8 +1482,8 @@ static void cfq_remove_request(struct request *rq)
 	cfq_del_rq_rb(rq);
 
 	cfqq->cfqd->rq_queued--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	if (rq_is_meta(rq)) {
 		WARN_ON(!cfqq->meta_pending);
 		cfqq->meta_pending--;
@@ -1496,8 +1518,8 @@ static void cfq_merged_request(struct request_queue *q, struct request *req,
 static void cfq_bio_merged(struct request_queue *q, struct request *req,
 				struct bio *bio)
 {
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
-					cfq_bio_sync(bio));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg,
+					bio_data_dir(bio), cfq_bio_sync(bio));
 }
 
 static void
@@ -1517,8 +1539,8 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
 	if (cfqq->next_rq == next)
 		cfqq->next_rq = rq;
 	cfq_remove_request(next);
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
-					rq_is_sync(next));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(next), rq_is_sync(next));
 }
 
 static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1549,7 +1571,7 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	del_timer(&cfqd->idle_slice_timer);
-	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1558,7 +1580,7 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
 				cfqd->serving_prio, cfqd->serving_type);
-		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+		cfq_blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
 		cfqq->slice_start = 0;
 		cfqq->dispatch_start = jiffies;
 		cfqq->allocated_slice = 0;
@@ -1889,7 +1911,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
-	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
@@ -1909,7 +1931,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
-	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
+	cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
 }
 
@@ -1964,6 +1986,15 @@ static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
 	int process_refs, new_process_refs;
 	struct cfq_queue *__cfqq;
 
+	/*
+	 * If there are no process references on the new_cfqq, then it is
+	 * unsafe to follow the ->new_cfqq chain as other cfqq's in the
+	 * chain may have dropped their last reference (not just their
+	 * last process reference).
+	 */
+	if (!cfqq_process_refs(new_cfqq))
+		return;
+
 	/* Avoid a circular list and skip interim queue merges */
 	while ((__cfqq = new_cfqq->new_cfqq)) {
 		if (__cfqq == cfqq)
@@ -1972,17 +2003,17 @@ static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
 	}
 
 	process_refs = cfqq_process_refs(cfqq);
+	new_process_refs = cfqq_process_refs(new_cfqq);
 	/*
 	 * If the process for the cfqq has gone away, there is no
 	 * sense in merging the queues.
 	 */
-	if (process_refs == 0)
+	if (process_refs == 0 || new_process_refs == 0)
 		return;
 
 	/*
 	 * Merge in the direction of the lesser amount of work.
 	 */
-	new_process_refs = cfqq_process_refs(new_cfqq);
 	if (new_process_refs >= process_refs) {
 		cfqq->new_cfqq = new_cfqq;
 		atomic_add(process_refs, &new_cfqq->ref);
@@ -2510,11 +2541,12 @@ static void cfq_cic_free(struct cfq_io_context *cic)
 static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
 {
 	unsigned long flags;
+	unsigned long dead_key = (unsigned long) cic->key;
 
-	BUG_ON(!cic->dead_key);
+	BUG_ON(!(dead_key & CIC_DEAD_KEY));
 
 	spin_lock_irqsave(&ioc->lock, flags);
-	radix_tree_delete(&ioc->radix_root, cic->dead_key);
+	radix_tree_delete(&ioc->radix_root, dead_key >> CIC_DEAD_INDEX_SHIFT);
 	hlist_del_rcu(&cic->cic_list);
 	spin_unlock_irqrestore(&ioc->lock, flags);
 
@@ -2537,15 +2569,10 @@ static void cfq_free_io_context(struct io_context *ioc)
 	__call_for_each_cic(ioc, cic_free_func);
 }
 
-static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void cfq_put_cooperator(struct cfq_queue *cfqq)
 {
 	struct cfq_queue *__cfqq, *next;
 
-	if (unlikely(cfqq == cfqd->active_queue)) {
-		__cfq_slice_expired(cfqd, cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
-	}
-
 	/*
 	 * If this queue was scheduled to merge with another queue, be
 	 * sure to drop the reference taken on that queue (and others in
@@ -2561,6 +2588,16 @@ static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 		cfq_put_queue(__cfqq);
 		__cfqq = next;
 	}
+}
+
+static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	if (unlikely(cfqq == cfqd->active_queue)) {
+		__cfq_slice_expired(cfqd, cfqq, 0);
+		cfq_schedule_dispatch(cfqd);
+	}
+
+	cfq_put_cooperator(cfqq);
 
 	cfq_put_queue(cfqq);
 }
@@ -2573,11 +2610,10 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 	list_del_init(&cic->queue_list);
 
 	/*
-	 * Make sure key == NULL is seen for dead queues
+	 * Make sure dead mark is seen for dead queues
 	 */
 	smp_wmb();
-	cic->dead_key = (unsigned long) cic->key;
-	cic->key = NULL;
+	cic->key = cfqd_dead_key(cfqd);
 
 	if (ioc->ioc_data == cic)
 		rcu_assign_pointer(ioc->ioc_data, NULL);
@@ -2596,7 +2632,7 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 static void cfq_exit_single_io_context(struct io_context *ioc,
 				       struct cfq_io_context *cic)
 {
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 
 	if (cfqd) {
 		struct request_queue *q = cfqd->queue;
@@ -2609,7 +2645,7 @@ static void cfq_exit_single_io_context(struct io_context *ioc,
 		 * race between exiting task and queue
 		 */
 		smp_read_barrier_depends();
-		if (cic->key)
+		if (cic->key == cfqd)
 			__cfq_exit_single_io_context(cfqd, cic);
 
 		spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2689,7 +2725,7 @@ static void cfq_init_prio_data(struct cfq_queue *cfqq, struct io_context *ioc)
 
 static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic)
 {
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 	struct cfq_queue *cfqq;
 	unsigned long flags;
 
@@ -2746,7 +2782,7 @@ static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 static void changed_cgroup(struct io_context *ioc, struct cfq_io_context *cic)
 {
 	struct cfq_queue *sync_cfqq = cic_to_cfqq(cic, 1);
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 	unsigned long flags;
 	struct request_queue *q;
 
@@ -2883,12 +2919,13 @@ cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc,
 	unsigned long flags;
 
 	WARN_ON(!list_empty(&cic->queue_list));
+	BUG_ON(cic->key != cfqd_dead_key(cfqd));
 
 	spin_lock_irqsave(&ioc->lock, flags);
 
 	BUG_ON(ioc->ioc_data == cic);
 
-	radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
+	radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
 	hlist_del_rcu(&cic->cic_list);
 	spin_unlock_irqrestore(&ioc->lock, flags);
 
@@ -2900,7 +2937,6 @@ cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
 {
 	struct cfq_io_context *cic;
 	unsigned long flags;
-	void *k;
 
 	if (unlikely(!ioc))
 		return NULL;
@@ -2917,13 +2953,11 @@ cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
 	}
 
 	do {
-		cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
+		cic = radix_tree_lookup(&ioc->radix_root, cfqd->cic_index);
 		rcu_read_unlock();
 		if (!cic)
 			break;
-		/* ->key must be copied to avoid race with cfq_exit_queue() */
-		k = cic->key;
-		if (unlikely(!k)) {
+		if (unlikely(cic->key != cfqd)) {
 			cfq_drop_dead_cic(cfqd, ioc, cic);
 			rcu_read_lock();
 			continue;
@@ -2956,7 +2990,7 @@ static int cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc,
 
 		spin_lock_irqsave(&ioc->lock, flags);
 		ret = radix_tree_insert(&ioc->radix_root,
-						(unsigned long) cfqd, cic);
+						cfqd->cic_index, cic);
 		if (!ret)
 			hlist_add_head_rcu(&cic->cic_list, &ioc->cic_list);
 		spin_unlock_irqrestore(&ioc->lock, flags);
@@ -3223,7 +3257,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 				cfq_clear_cfqq_wait_request(cfqq);
 				__blk_run_queue(cfqd->queue);
 			} else {
-				blkiocg_update_idle_time_stats(
+				cfq_blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
 				cfq_mark_cfqq_must_dispatch(cfqq);
 			}
@@ -3251,7 +3285,7 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 	cfq_rq_enqueued(cfqd, cfqq, rq);
@@ -3339,9 +3373,9 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
-	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
-			rq_io_start_time_ns(rq), rq_data_dir(rq),
-			rq_is_sync(rq));
+	cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg,
+			rq_start_time_ns(rq), rq_io_start_time_ns(rq),
+			rq_data_dir(rq), rq_is_sync(rq));
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
 
@@ -3516,6 +3550,9 @@ split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq)
 	}
 
 	cic_set_cfqq(cic, NULL, 1);
+
+	cfq_put_cooperator(cfqq);
+
 	cfq_put_queue(cfqq);
 	return NULL;
 }
@@ -3702,16 +3739,38 @@ static void cfq_exit_queue(struct elevator_queue *e)
 
 	cfq_put_async_queues(cfqd);
 	cfq_release_cfq_groups(cfqd);
-	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+	cfq_blkiocg_del_blkio_group(&cfqd->root_group.blkg);
 
 	spin_unlock_irq(q->queue_lock);
 
 	cfq_shutdown_timer_wq(cfqd);
 
+	spin_lock(&cic_index_lock);
+	ida_remove(&cic_index_ida, cfqd->cic_index);
+	spin_unlock(&cic_index_lock);
+
 	/* Wait for cfqg->blkg->key accessors to exit their grace periods. */
 	call_rcu(&cfqd->rcu, cfq_cfqd_free);
 }
 
+static int cfq_alloc_cic_index(void)
+{
+	int index, error;
+
+	do {
+		if (!ida_pre_get(&cic_index_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock(&cic_index_lock);
+		error = ida_get_new(&cic_index_ida, &index);
+		spin_unlock(&cic_index_lock);
+		if (error && error != -EAGAIN)
+			return error;
+	} while (error);
+
+	return index;
+}
+
 static void *cfq_init_queue(struct request_queue *q)
 {
 	struct cfq_data *cfqd;
@@ -3719,10 +3778,16 @@ static void *cfq_init_queue(struct request_queue *q)
 	struct cfq_group *cfqg;
 	struct cfq_rb_root *st;
 
+	i = cfq_alloc_cic_index();
+	if (i < 0)
+		return NULL;
+
 	cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
 	if (!cfqd)
 		return NULL;
 
+	cfqd->cic_index = i;
+
 	/* Init root service tree */
 	cfqd->grp_service_tree = CFQ_RB_ROOT;
 
@@ -3742,8 +3807,8 @@ static void *cfq_init_queue(struct request_queue *q)
 	 */
 	atomic_set(&cfqg->ref, 1);
 	rcu_read_lock();
-	blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
-					0);
+	cfq_blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg,
+					(void *)cfqd, 0);
 	rcu_read_unlock();
 #endif
 	/*
@@ -3984,6 +4049,7 @@ static void __exit cfq_exit(void)
 	 */
 	if (elv_ioc_count_read(cfq_ioc_count))
 		wait_for_completion(&all_gone);
+	ida_destroy(&cic_index_ida);
 	cfq_slab_kill();
 }
 
diff --git a/block/cfq.h b/block/cfq.h
new file mode 100644
index 00000000000..93448e5a2e4
--- /dev/null
+++ b/block/cfq.h
@@ -0,0 +1,115 @@
+#ifndef _CFQ_H
+#define _CFQ_H
+#include "blk-cgroup.h"
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync)
+{
+	blkiocg_update_io_add_stats(blkg, curr_blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue)
+{
+	blkiocg_update_dequeue_stats(blkg, dequeue);
+}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time)
+{
+	blkiocg_update_timeslice_used(blkg, time);
+}
+
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg)
+{
+	blkiocg_set_start_empty_time(blkg);
+}
+
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync)
+{
+	blkiocg_update_io_remove_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync)
+{
+	blkiocg_update_io_merged_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_idle_time_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_avg_queue_size_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_set_idle_time_stats(blkg);
+}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync)
+{
+	blkiocg_update_dispatch_stats(blkg, bytes, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync)
+{
+	blkiocg_update_completion_stats(blkg, start_time, io_start_time,
+				direction, sync);
+}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {
+	blkiocg_add_blkio_group(blkcg, blkg, key, dev);
+}
+
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return blkiocg_del_blkio_group(blkg);
+}
+
+#else /* CFQ_GROUP_IOSCHED */
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue) {}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time) {}
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg) {}
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+}
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg) {}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg) {}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {}
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return 0;
+}
+
+#endif /* CFQ_GROUP_IOSCHED */
+#endif
diff --git a/block/elevator.c b/block/elevator.c
index 6df2b5056b5..923a9139106 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -242,9 +242,11 @@ int elevator_init(struct request_queue *q, char *name)
 {
 	struct elevator_type *e = NULL;
 	struct elevator_queue *eq;
-	int ret = 0;
 	void *data;
 
+	if (unlikely(q->elevator))
+		return 0;
+
 	INIT_LIST_HEAD(&q->queue_head);
 	q->last_merge = NULL;
 	q->end_sector = 0;
@@ -284,7 +286,7 @@ int elevator_init(struct request_queue *q, char *name)
 	}
 
 	elevator_attach(q, eq, data);
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(elevator_init);
 
@@ -1097,7 +1099,7 @@ ssize_t elv_iosched_show(struct request_queue *q, char *name)
 	struct elevator_type *__e;
 	int len = 0;
 
-	if (!q->elevator)
+	if (!q->elevator || !blk_queue_stackable(q))
 		return sprintf(name, "none\n");
 
 	elv = e->elevator_type;
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index 98a66103f4f..a854df2a5a4 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -165,7 +165,7 @@ static inline int ablkcipher_next_slow(struct ablkcipher_request *req,
 
 	p = kmalloc(n, GFP_ATOMIC);
 	if (!p)
-		ablkcipher_walk_done(req, walk, -ENOMEM);
+		return ablkcipher_walk_done(req, walk, -ENOMEM);
 
 	base = p + 1;
 
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 74641151880..08e0140920e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -104,6 +104,24 @@ config ACPI_SYSFS_POWER
 	help
 	  Say N to disable power /sys interface
 
+config ACPI_EC_DEBUGFS
+	tristate "EC read/write access through /sys/kernel/debug/ec"
+	default n
+	help
+	  Say N to disable Embedded Controller /sys/kernel/debug interface
+
+	  Be aware that using this interface can confuse your Embedded
+	  Controller in a way that a normal reboot is not enough. You then
+	  have to power of your system, and remove the laptop battery for
+	  some seconds.
+	  An Embedded Controller typically is available on laptops and reads
+	  sensor values like battery state and temperature.
+	  The kernel accesses the EC through ACPI parsed code provided by BIOS
+	  tables. This option allows to access the EC directly without ACPI
+	  code being involved.
+	  Thus this option is a debug option that helps to write ACPI drivers
+	  and can be used to identify ACPI code or EC firmware bugs.
+
 config ACPI_PROC_EVENT
 	bool "Deprecated /proc/acpi/event support"
 	depends on PROC_FS
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 6ee33169e1d..833b582d176 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ACPI_SBS)		+= sbshc.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 obj-$(CONFIG_ACPI_HED)		+= hed.o
+obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index d269a8f3329..446aced33af 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -46,6 +46,8 @@ static unsigned long power_saving_mwait_eax;
 
 static unsigned char tsc_detected_unstable;
 static unsigned char tsc_marked_unstable;
+static unsigned char lapic_detected_unstable;
+static unsigned char lapic_marked_unstable;
 
 static void power_saving_mwait_init(void)
 {
@@ -75,9 +77,6 @@ static void power_saving_mwait_init(void)
 	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
 		(highest_subcstate - 1);
 
-	for_each_online_cpu(i)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
-
 #if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -86,13 +85,15 @@ static void power_saving_mwait_init(void)
 		 * AMD Fam10h TSC will tick in all
 		 * C/P/S0/S1 states when this bit is set.
 		 */
-		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return;
-
-		/*FALL THROUGH*/
+		if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			tsc_detected_unstable = 1;
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			lapic_detected_unstable = 1;
+		break;
 	default:
-		/* TSC could halt in idle */
+		/* TSC & LAPIC could halt in idle */
 		tsc_detected_unstable = 1;
+		lapic_detected_unstable = 1;
 	}
 #endif
 }
@@ -180,10 +181,20 @@ static int power_saving_thread(void *data)
 				mark_tsc_unstable("TSC halts in idle");
 				tsc_marked_unstable = 1;
 			}
+			if (lapic_detected_unstable && !lapic_marked_unstable) {
+				int i;
+				/* LAPIC could halt in idle, so notify users */
+				for_each_online_cpu(i)
+					clockevents_notify(
+						CLOCK_EVT_NOTIFY_BROADCAST_ON,
+						&i);
+				lapic_marked_unstable = 1;
+			}
 			local_irq_disable();
 			cpu = smp_processor_id();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 			stop_critical_timings();
 
 			__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -192,8 +203,9 @@ static int power_saving_thread(void *data)
 				__mwait(power_saving_mwait_eax, 1);
 
 			start_critical_timings();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 			local_irq_enable();
 
 			if (jiffies > expire_time) {
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 33181ad350d..b17d8de9f6f 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -119,6 +119,10 @@
 
 #define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
 
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+
 /******************************************************************************
  *
  * ACPI Specification constants (Do not change unless the specification changes)
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 64d1e5c2d4a..c3f43daa8be 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -80,10 +80,6 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
 acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
 
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 9070f1fe8f1..899d68afc3c 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -125,6 +125,14 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
  */
 u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
 
+/*
+ * Optionally truncate I/O addresses to 16 bits. Provides compatibility
+ * with other ACPI implementations. NOTE: During ACPICA initialization,
+ * this value is set to TRUE if any Windows OSI strings have been
+ * requested by the BIOS.
+ */
+u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
+
 /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
 
 struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 5900f135dc6..32391588e16 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -90,7 +90,11 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 /*
  * hwgpe - GPE support
  */
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info);
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
 
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index a221ad40416..7c2c336006a 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -69,7 +69,7 @@ acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
 
@@ -78,9 +78,8 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = (u8)
-	    (1 <<
-	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* Clear the wake/run bits up front */
 
@@ -100,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 	return_ACPI_STATUS(AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_enable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless
- *              of type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-
-	ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Clear the GPE (of stale events) */
-
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-
-	status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_disable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to disable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE,
- *              regardless of the type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
-
-	/*
-	 * Note: Always disable the GPE, even if we think that that it is already
-	 * disabled. It is possible that the AML or some other code has enabled
-	 * the GPE behind our back.
-	 */
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Always H/W disable this GPE, even if we don't know the GPE type.
-	 * Simply clear the enable bit for this particular GPE, but do not
-	 * write out the current GPE enable mask since this may inadvertently
-	 * enable GPEs too early. An example is a rogue GPE that has arrived
-	 * during ACPICA initialization - possibly because AML or other code
-	 * has enabled the GPE.
-	 */
-	status = acpi_hw_low_disable_gpe(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
 
 /*******************************************************************************
  *
@@ -451,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 		return_VOID;
 	}
 
-	/* Update the GPE register masks for return to enabled state */
-
-	(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
 	/*
 	 * Take a snapshot of the GPE info for this level - we copy the info to
 	 * prevent a race condition with remove_handler/remove_block.
@@ -607,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE, so it doesn't keep firing before the method has a
 		 * chance to run (it runs asynchronously with interrupts enabled).
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
@@ -644,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE. The GPE will remain disabled a handler
 		 * is installed or ACPICA is restarted.
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 7c28f2d9fd3..341a38ce8aa 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -500,6 +500,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
 			gpe_event_info = &gpe_block->event_info[gpe_index];
+			gpe_number = gpe_index + gpe_block->block_base_number;
+
+			/*
+			 * If the GPE has already been enabled for runtime
+			 * signaling, make sure it remains enabled, but do not
+			 * increment its reference counter.
+			 */
+			if (gpe_event_info->runtime_count) {
+				acpi_set_gpe(gpe_device, gpe_number,
+						ACPI_GPE_ENABLE);
+				gpe_enabled_count++;
+				continue;
+			}
 
 			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
 				wake_gpe_count++;
@@ -516,7 +529,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			/* Enable this GPE */
 
-			gpe_number = gpe_index + gpe_block->block_base_number;
 			status = acpi_enable_gpe(gpe_device, gpe_number,
 						 ACPI_GPE_TYPE_RUNTIME);
 			if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index cc825023012..4a531cdf794 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -719,13 +719,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	handler->context = context;
 	handler->method_node = gpe_event_info->dispatch.method_node;
 
-	/* Disable the GPE before installing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Install the handler */
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d5a5efc043b..18b3f1468b7 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -70,6 +70,7 @@ acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 acpi_status acpi_enable(void)
 {
 	acpi_status status;
+	int retry;
 
 	ACPI_FUNCTION_TRACE(acpi_enable);
 
@@ -98,16 +99,18 @@ acpi_status acpi_enable(void)
 
 	/* Sanity check that transition succeeded */
 
-	if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
-		ACPI_ERROR((AE_INFO,
-			    "Hardware did not enter ACPI mode"));
-		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+	for (retry = 0; retry < 30000; ++retry) {
+		if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
+			if (retry != 0)
+				ACPI_WARNING((AE_INFO,
+				"Platform took > %d00 usec to enter ACPI mode", retry));
+			return_ACPI_STATUS(AE_OK);
+		}
+		acpi_os_stall(100);	/* 100 usec */
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-			  "Transition to ACPI mode successful\n"));
-
-	return_ACPI_STATUS(AE_OK);
+	ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
+	return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_enable)
@@ -210,6 +213,44 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event)
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_clear_and_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info  - GPE to enable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status;
+
+	/*
+	 * We will only allow a GPE to be enabled if it has either an
+	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
+	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
+	 * first time it fires.
+	 */
+	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+		return_ACPI_STATUS(AE_NO_HANDLER);
+	}
+
+	/* Clear the GPE (of stale events) */
+	status = acpi_hw_clear_gpe(gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Enable the requested GPE */
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_set_gpe
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
@@ -249,11 +290,11 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
 
 	switch (action) {
 	case ACPI_GPE_ENABLE:
-		status = acpi_ev_enable_gpe(gpe_event_info);
+		status = acpi_clear_and_enable_gpe(gpe_event_info);
 		break;
 
 	case ACPI_GPE_DISABLE:
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		break;
 
 	default:
@@ -316,7 +357,11 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 
 		gpe_event_info->runtime_count++;
 		if (gpe_event_info->runtime_count == 1) {
-			status = acpi_ev_enable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_clear_and_enable_gpe(gpe_event_info);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count--;
 				goto unlock_and_exit;
@@ -343,7 +388,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 		 */
 		gpe_event_info->wakeup_count++;
 		if (gpe_event_info->wakeup_count == 1) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
@@ -403,7 +448,12 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 		gpe_event_info->runtime_count--;
 		if (!gpe_event_info->runtime_count) {
-			status = acpi_ev_disable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_hw_low_set_gpe(gpe_event_info,
+							     ACPI_GPE_DISABLE);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count++;
 				goto unlock_and_exit;
@@ -424,7 +474,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 		gpe_event_info->wakeup_count--;
 		if (!gpe_event_info->wakeup_count) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 6d32e09327f..675aaa91a77 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -201,6 +201,14 @@ acpi_status acpi_ex_system_do_sleep(u64 how_long)
 
 	acpi_ex_relinquish_interpreter();
 
+	/*
+	 * For compatibility with other ACPI implementations and to prevent
+	 * accidental deep sleeps, limit the sleep time to something reasonable.
+	 */
+	if (how_long > ACPI_MAX_SLEEP) {
+		how_long = ACPI_MAX_SLEEP;
+	}
+
 	acpi_os_sleep(how_long);
 
 	/* And now we must get the interpreter again */
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index bd72319a38f..3450309c278 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -57,21 +57,47 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 
 /******************************************************************************
  *
- * FUNCTION:	acpi_hw_low_disable_gpe
+ * FUNCTION:	acpi_hw_gpe_register_bit
+ *
+ * PARAMETERS:	gpe_event_info	    - Info block for the GPE
+ *		gpe_register_info   - Info block for the GPE register
+ *
+ * RETURN:	Status
+ *
+ * DESCRIPTION:	Compute GPE enable mask with one bit corresponding to the given
+ *		GPE set.
+ *
+ ******************************************************************************/
+
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info)
+{
+	return (u32)1 << (gpe_event_info->gpe_number -
+				gpe_register_info->base_gpe_number);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION:	acpi_hw_low_set_gpe
  *
  * PARAMETERS:	gpe_event_info	    - Info block for the GPE to be disabled
+ *		action		    - Enable or disable
  *
  * RETURN:	Status
  *
- * DESCRIPTION: Disable a single GPE in the enable register.
+ * DESCRIPTION: Enable or disable a single GPE in its enable register.
  *
  ******************************************************************************/
 
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	u32 enable_mask;
+	u32 register_bit;
+
+	ACPI_FUNCTION_ENTRY();
 
 	/* Get the info block for the entire GPE register */
 
@@ -87,11 +113,27 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 		return (status);
 	}
 
-	/* Clear just the bit that corresponds to this GPE */
+	/* Set ot clear just the bit that corresponds to this GPE */
 
-	ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
-				     (gpe_event_info->gpe_number -
-				      gpe_register_info->base_gpe_number)));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
+	switch (action) {
+	case ACPI_GPE_COND_ENABLE:
+		if (!(register_bit & gpe_register_info->enable_for_run))
+			return (AE_BAD_PARAMETER);
+
+	case ACPI_GPE_ENABLE:
+		ACPI_SET_BIT(enable_mask, register_bit);
+		break;
+
+	case ACPI_GPE_DISABLE:
+		ACPI_CLEAR_BIT(enable_mask, register_bit);
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Invalid action\n"));
+		return (AE_BAD_PARAMETER);
+	}
 
 	/* Write the updated enable mask */
 
@@ -116,23 +158,11 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 {
-	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 
 	ACPI_FUNCTION_ENTRY();
 
-	/* Get the info block for the entire GPE register */
-
-	gpe_register_info = gpe_event_info->register_info;
-	if (!gpe_register_info) {
-		return (AE_NOT_EXIST);
-	}
-
-	/* Write the entire GPE (runtime) enable register */
-
-	status = acpi_hw_write(gpe_register_info->enable_for_run,
-			       &gpe_register_info->enable_address);
-
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
 	return (status);
 }
 
@@ -150,21 +180,28 @@ acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 
 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 {
+	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_ENTRY();
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	/* Get the info block for the entire GPE register */
+
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		return (AE_NOT_EXIST);
+	}
+
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/*
 	 * Write a one to the appropriate bit in the status register to
 	 * clear this GPE.
 	 */
 	status = acpi_hw_write(register_bit,
-			       &gpe_event_info->register_info->status_address);
+			       &gpe_register_info->status_address);
 
 	return (status);
 }
@@ -187,7 +224,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 		       acpi_event_status * event_status)
 {
 	u32 in_byte;
-	u8 register_bit;
+	u32 register_bit;
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	acpi_event_status local_event_status = 0;
@@ -204,9 +241,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 
 	/* Get the register bitmask for this GPE */
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* GPE currently enabled? (enabled for runtime?) */
 
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c10d587c164..e1d9c777b21 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -222,6 +222,12 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
 	u32 one_byte;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
@@ -279,6 +285,12 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
 	acpi_status status;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 9bd6f050f29..4e5272c313e 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -193,6 +193,15 @@ acpi_status acpi_ns_initialize_devices(void)
 					acpi_ns_init_one_device, NULL, &info,
 					NULL);
 
+	/*
+	 * Any _OSI requests should be completed by now. If the BIOS has
+	 * requested any Windows OSI strings, we will always truncate
+	 * I/O addresses to 16 bits -- for Windows compatibility.
+	 */
+	if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) {
+		acpi_gbl_truncate_io_addresses = TRUE;
+	}
+
 	ACPI_FREE(info.evaluate_info);
 	if (ACPI_FAILURE(status)) {
 		goto error_exit;
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index db3946e9c66..216e1e948ff 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/kref.h>
 #include <linux/rculist.h>
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2ebc3911550..864dd46c346 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -781,7 +781,7 @@ static int __init erst_init(void)
 	status = acpi_get_table(ACPI_SIG_ERST, 0,
 				(struct acpi_table_header **)&erst_tab);
 	if (status == AE_NOT_FOUND) {
-		pr_err(ERST_PFX "Table is not found!\n");
+		pr_info(ERST_PFX "Table is not found!\n");
 		goto err;
 	} else if (ACPI_FAILURE(status)) {
 		const char *msg = acpi_format_exception(status);
diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
index 814b1924961..8f8bd736d4f 100644
--- a/drivers/acpi/atomicio.c
+++ b/drivers/acpi/atomicio.c
@@ -31,6 +31,7 @@
 #include <linux/kref.h>
 #include <linux/rculist.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <acpi/atomicio.h>
 
 #define ACPI_PFX "ACPI: "
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3026e3fa83e..dc58402b0a1 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -868,9 +868,15 @@ static void acpi_battery_remove_fs(struct acpi_device *device)
 static void acpi_battery_notify(struct acpi_device *device, u32 event)
 {
 	struct acpi_battery *battery = acpi_driver_data(device);
+#ifdef CONFIG_ACPI_SYSFS_POWER
+	struct device *old;
+#endif
 
 	if (!battery)
 		return;
+#ifdef CONFIG_ACPI_SYSFS_POWER
+	old = battery->bat.dev;
+#endif
 	acpi_battery_update(battery);
 	acpi_bus_generate_proc_event(device, event,
 				     acpi_battery_present(battery));
@@ -879,7 +885,7 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event)
 					acpi_battery_present(battery));
 #ifdef CONFIG_ACPI_SYSFS_POWER
 	/* acpi_battery_update could remove power_supply object */
-	if (battery->bat.dev)
+	if (old && battery->bat.dev)
 		power_supply_changed(&battery->bat);
 #endif
 }
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 2815df66f6f..2bb28b9d91c 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -214,7 +214,15 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 	.ident = "Sony VGN-SR290J",
 	.matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
+		},
+	},
+	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "VGN-NS50B_L",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"),
 		},
 	},
 	{
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd51c4ab482..7d857dabdde 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -425,7 +425,7 @@ static int acpi_button_add(struct acpi_device *device)
 		/* Button's GPE is run-wake GPE */
 		acpi_enable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count++;
 		device->wakeup.state.enabled = 1;
 	}
@@ -449,7 +449,7 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 	if (device->wakeup.flags.valid) {
 		acpi_disable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count--;
 		device->wakeup.state.enabled = 0;
 	}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e61d4f8e62a..1fa0aafebe2 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -34,8 +34,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -45,10 +43,13 @@
 #include <acpi/acpi_drivers.h>
 #include <linux/dmi.h>
 
+#include "internal.h"
+
 #define ACPI_EC_CLASS			"embedded_controller"
 #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
 #define ACPI_EC_FILE_INFO		"info"
 
+#undef PREFIX
 #define PREFIX				"ACPI: EC: "
 
 /* EC status register */
@@ -79,7 +80,7 @@ enum {
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
 	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
 					 * OpReg are installed */
-	EC_FLAGS_FROZEN,		/* Transactions are suspended */
+	EC_FLAGS_BLOCKED,		/* Transactions are blocked */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -106,19 +107,8 @@ struct transaction {
 	bool done;
 };
 
-static struct acpi_ec {
-	acpi_handle handle;
-	unsigned long gpe;
-	unsigned long command_addr;
-	unsigned long data_addr;
-	unsigned long global_lock;
-	unsigned long flags;
-	struct mutex lock;
-	wait_queue_head_t wait;
-	struct list_head list;
-	struct transaction *curr;
-	spinlock_t curr_lock;
-} *boot_ec, *first_ec;
+struct acpi_ec *boot_ec, *first_ec;
+EXPORT_SYMBOL(first_ec);
 
 static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
 static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
@@ -293,7 +283,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
-	if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+	if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
 		status = -EINVAL;
 		goto unlock;
 	}
@@ -459,7 +449,7 @@ int ec_transaction(u8 command,
 
 EXPORT_SYMBOL(ec_transaction);
 
-void acpi_ec_suspend_transactions(void)
+void acpi_ec_block_transactions(void)
 {
 	struct acpi_ec *ec = first_ec;
 
@@ -468,11 +458,11 @@ void acpi_ec_suspend_transactions(void)
 
 	mutex_lock(&ec->lock);
 	/* Prevent transactions from being carried out */
-	set_bit(EC_FLAGS_FROZEN, &ec->flags);
+	set_bit(EC_FLAGS_BLOCKED, &ec->flags);
 	mutex_unlock(&ec->lock);
 }
 
-void acpi_ec_resume_transactions(void)
+void acpi_ec_unblock_transactions(void)
 {
 	struct acpi_ec *ec = first_ec;
 
@@ -481,10 +471,20 @@ void acpi_ec_resume_transactions(void)
 
 	mutex_lock(&ec->lock);
 	/* Allow transactions to be carried out again */
-	clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+	clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
 	mutex_unlock(&ec->lock);
 }
 
+void acpi_ec_unblock_transactions_early(void)
+{
+	/*
+	 * Allow transactions to happen again (this function is called from
+	 * atomic context during wakeup, so we don't need to acquire the mutex).
+	 */
+	if (first_ec)
+		clear_bit(EC_FLAGS_BLOCKED, &first_ec->flags);
+}
+
 static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
@@ -669,72 +669,6 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 }
 
 /* --------------------------------------------------------------------------
-                              FS Interface (/proc)
-   -------------------------------------------------------------------------- */
-
-static struct proc_dir_entry *acpi_ec_dir;
-
-static int acpi_ec_read_info(struct seq_file *seq, void *offset)
-{
-	struct acpi_ec *ec = seq->private;
-
-	if (!ec)
-		goto end;
-
-	seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe);
-	seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n",
-		   (unsigned)ec->command_addr, (unsigned)ec->data_addr);
-	seq_printf(seq, "use global lock:\t%s\n",
-		   ec->global_lock ? "yes" : "no");
-      end:
-	return 0;
-}
-
-static int acpi_ec_info_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_ec_read_info, PDE(inode)->data);
-}
-
-static const struct file_operations acpi_ec_info_ops = {
-	.open = acpi_ec_info_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int acpi_ec_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *entry = NULL;
-
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
-						     acpi_ec_dir);
-		if (!acpi_device_dir(device))
-			return -ENODEV;
-	}
-
-	entry = proc_create_data(ACPI_EC_FILE_INFO, S_IRUGO,
-				 acpi_device_dir(device),
-				 &acpi_ec_info_ops, acpi_driver_data(device));
-	if (!entry)
-		return -ENODEV;
-	return 0;
-}
-
-static int acpi_ec_remove_fs(struct acpi_device *device)
-{
-
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device));
-		remove_proc_entry(acpi_device_bid(device), acpi_ec_dir);
-		acpi_device_dir(device) = NULL;
-	}
-
-	return 0;
-}
-
-/* --------------------------------------------------------------------------
                                Driver Interface
    -------------------------------------------------------------------------- */
 static acpi_status
@@ -884,7 +818,12 @@ static int acpi_ec_add(struct acpi_device *device)
 	if (!first_ec)
 		first_ec = ec;
 	device->driver_data = ec;
-	acpi_ec_add_fs(device);
+
+	WARN(!request_region(ec->data_addr, 1, "EC data"),
+	     "Could not request EC data io port 0x%lx", ec->data_addr);
+	WARN(!request_region(ec->command_addr, 1, "EC cmd"),
+	     "Could not request EC cmd io port 0x%lx", ec->command_addr);
+
 	pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
 			  ec->gpe, ec->command_addr, ec->data_addr);
 
@@ -911,7 +850,8 @@ static int acpi_ec_remove(struct acpi_device *device, int type)
 		kfree(handler);
 	}
 	mutex_unlock(&ec->lock);
-	acpi_ec_remove_fs(device);
+	release_region(ec->data_addr, 1);
+	release_region(ec->command_addr, 1);
 	device->driver_data = NULL;
 	if (ec == first_ec)
 		first_ec = NULL;
@@ -1110,16 +1050,10 @@ int __init acpi_ec_init(void)
 {
 	int result = 0;
 
-	acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir);
-	if (!acpi_ec_dir)
-		return -ENODEV;
-
 	/* Now register the driver for the EC */
 	result = acpi_bus_register_driver(&acpi_ec_driver);
-	if (result < 0) {
-		remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
+	if (result < 0)
 		return -ENODEV;
-	}
 
 	return result;
 }
@@ -1130,9 +1064,6 @@ static void __exit acpi_ec_exit(void)
 {
 
 	acpi_bus_unregister_driver(&acpi_ec_driver);
-
-	remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
-
 	return;
 }
 #endif	/* 0 */
diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c
new file mode 100644
index 00000000000..0e869b3f81c
--- /dev/null
+++ b/drivers/acpi/ec_sys.c
@@ -0,0 +1,160 @@
+/*
+ * ec_sys.c
+ *
+ * Copyright (C) 2010 SUSE Products GmbH/Novell
+ * Author:
+ *      Thomas Renninger <trenn@suse.de>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/debugfs.h>
+#include "internal.h"
+
+MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
+MODULE_DESCRIPTION("ACPI EC sysfs access driver");
+MODULE_LICENSE("GPL");
+
+static bool write_support;
+module_param(write_support, bool, 0644);
+MODULE_PARM_DESC(write_support, "Dangerous, reboot and removal of battery may "
+		 "be needed.");
+
+#define EC_SPACE_SIZE 256
+
+struct sysdev_class acpi_ec_sysdev_class = {
+	.name = "ec",
+};
+
+static struct dentry *acpi_ec_debugfs_dir;
+
+static int acpi_ec_open_io(struct inode *i, struct file *f)
+{
+	f->private_data = i->i_private;
+	return 0;
+}
+
+static ssize_t acpi_ec_read_io(struct file *f, char __user *buf,
+			       size_t count, loff_t *off)
+{
+	/* Use this if support reading/writing multiple ECs exists in ec.c:
+	 * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private;
+	 */
+	unsigned int size = EC_SPACE_SIZE;
+	u8 *data = (u8 *) buf;
+	loff_t init_off = *off;
+	int err = 0;
+
+	if (*off >= size)
+		return 0;
+	if (*off + count >= size) {
+		size -= *off;
+		count = size;
+	} else
+		size = count;
+
+	while (size) {
+		err = ec_read(*off, &data[*off - init_off]);
+		if (err)
+			return err;
+		*off += 1;
+		size--;
+	}
+	return count;
+}
+
+static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf,
+				size_t count, loff_t *off)
+{
+	/* Use this if support reading/writing multiple ECs exists in ec.c:
+	 * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private;
+	 */
+
+	unsigned int size = count;
+	loff_t init_off = *off;
+	u8 *data = (u8 *) buf;
+	int err = 0;
+
+	if (*off >= EC_SPACE_SIZE)
+		return 0;
+	if (*off + count >= EC_SPACE_SIZE) {
+		size = EC_SPACE_SIZE - *off;
+		count = size;
+	}
+
+	while (size) {
+		u8 byte_write = data[*off - init_off];
+		err = ec_write(*off, byte_write);
+		if (err)
+			return err;
+
+		*off += 1;
+		size--;
+	}
+	return count;
+}
+
+static struct file_operations acpi_ec_io_ops = {
+	.owner = THIS_MODULE,
+	.open  = acpi_ec_open_io,
+	.read  = acpi_ec_read_io,
+	.write = acpi_ec_write_io,
+};
+
+int acpi_ec_add_debugfs(struct acpi_ec *ec, unsigned int ec_device_count)
+{
+	struct dentry *dev_dir;
+	char name[64];
+	mode_t mode = 0400;
+
+	if (ec_device_count == 0) {
+		acpi_ec_debugfs_dir = debugfs_create_dir("ec", NULL);
+		if (!acpi_ec_debugfs_dir)
+			return -ENOMEM;
+	}
+
+	sprintf(name, "ec%u", ec_device_count);
+	dev_dir = debugfs_create_dir(name, acpi_ec_debugfs_dir);
+	if (!dev_dir) {
+		if (ec_device_count != 0)
+			goto error;
+		return -ENOMEM;
+	}
+
+	if (!debugfs_create_x32("gpe", 0444, dev_dir, (u32 *)&first_ec->gpe))
+		goto error;
+	if (!debugfs_create_bool("use_global_lock", 0444, dev_dir,
+				 (u32 *)&first_ec->global_lock))
+		goto error;
+
+	if (write_support)
+		mode = 0600;
+	if (!debugfs_create_file("io", mode, dev_dir, ec, &acpi_ec_io_ops))
+		goto error;
+
+	return 0;
+
+error:
+	debugfs_remove_recursive(acpi_ec_debugfs_dir);
+	return -ENOMEM;
+}
+
+static int __init acpi_ec_sys_init(void)
+{
+	int err = 0;
+	if (first_ec)
+		err = acpi_ec_add_debugfs(first_ec, 0);
+	else
+		err = -ENODEV;
+	return err;
+}
+
+static void __exit acpi_ec_sys_exit(void)
+{
+	debugfs_remove_recursive(acpi_ec_debugfs_dir);
+}
+
+module_init(acpi_ec_sys_init);
+module_exit(acpi_ec_sys_exit);
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index acf2ab24984..8a3b840c0bb 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -347,7 +347,6 @@ static int __init acpi_fan_init(void)
 {
 	int result = 0;
 
-
 #ifdef CONFIG_ACPI_PROCFS
 	acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
 	if (!acpi_fan_dir)
@@ -356,7 +355,9 @@ static int __init acpi_fan_init(void)
 
 	result = acpi_bus_register_driver(&acpi_fan_driver);
 	if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS
 		remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
 		return -ENODEV;
 	}
 
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e2841136723..8ae27264a00 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -18,6 +18,11 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
+#ifndef _ACPI_INTERNAL_H_
+#define _ACPI_INTERNAL_H_
+
+#include <linux/sysdev.h>
+
 #define PREFIX "ACPI: "
 
 int init_acpi_device_notify(void);
@@ -46,11 +51,29 @@ void acpi_early_processor_set_pdc(void);
 /* --------------------------------------------------------------------------
                                   Embedded Controller
    -------------------------------------------------------------------------- */
+struct acpi_ec {
+	acpi_handle handle;
+	unsigned long gpe;
+	unsigned long command_addr;
+	unsigned long data_addr;
+	unsigned long global_lock;
+	unsigned long flags;
+	struct mutex lock;
+	wait_queue_head_t wait;
+	struct list_head list;
+	struct transaction *curr;
+	spinlock_t curr_lock;
+	struct sys_device sysdev;
+};
+
+extern struct acpi_ec *first_ec;
+
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
-void acpi_ec_suspend_transactions(void);
-void acpi_ec_resume_transactions(void);
+void acpi_ec_block_transactions(void);
+void acpi_ec_unblock_transactions(void);
+void acpi_ec_unblock_transactions_early(void);
 
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
@@ -62,3 +85,5 @@ int acpi_sleep_proc_init(void);
 #else
 static inline int acpi_sleep_proc_init(void) { return 0; }
 #endif
+
+#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 51284351418..e9699aaed10 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -223,7 +223,7 @@ static bool processor_physically_present(acpi_handle handle)
 	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
 	cpuid = acpi_get_cpuid(handle, type, acpi_id);
 
-	if (cpuid == -1)
+	if ((cpuid == -1) && (num_possible_cpus() > 1))
 		return false;
 
 	return true;
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index b1034a9ada4..38ea0cc6dc4 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -581,6 +581,11 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device)
 		return 0;
 	}
 
+#ifdef CONFIG_SMP
+	if (pr->id >= setup_max_cpus && pr->id != 0)
+		return 0;
+#endif
+
 	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
 
 	/*
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2e8c27d48f2..e9a8026d39f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -76,14 +76,19 @@ static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
 module_param(max_cstate, uint, 0000);
 static unsigned int nocst __read_mostly;
 module_param(nocst, uint, 0000);
+static int bm_check_disable __read_mostly;
+module_param(bm_check_disable, uint, 0000);
 
 static unsigned int latency_factor __read_mostly = 2;
 module_param(latency_factor, uint, 0644);
 
-static s64 us_to_pm_timer_ticks(s64 t)
+#ifdef CONFIG_ACPI_PROCFS
+static u64 us_to_pm_timer_ticks(s64 t)
 {
 	return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
 }
+#endif
+
 /*
  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
  * For now disable this. Probably a bug somewhere else.
@@ -731,10 +736,10 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
 
 		seq_puts(seq, "demotion[--] ");
 
-		seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
+		seq_printf(seq, "latency[%03d] usage[%08d] duration[%020Lu]\n",
 			   pr->power.states[i].latency,
 			   pr->power.states[i].usage,
-			   (unsigned long long)pr->power.states[i].time);
+			   us_to_pm_timer_ticks(pr->power.states[i].time));
 	}
 
       end:
@@ -763,6 +768,9 @@ static int acpi_idle_bm_check(void)
 {
 	u32 bm_status = 0;
 
+	if (bm_check_disable)
+		return 0;
+
 	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
 	if (bm_status)
 		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
@@ -861,7 +869,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
-	s64 sleep_ticks = 0;
 
 	pr = __get_cpu_var(processors);
 
@@ -906,8 +913,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
-	sleep_ticks = us_to_pm_timer_ticks(idle_time);
-
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -918,7 +923,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	cx->usage++;
 
 	lapic_timer_state_broadcast(pr, cx, 0);
-	cx->time += sleep_ticks;
+	cx->time += idle_time;
 	return idle_time;
 }
 
@@ -940,7 +945,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
-	s64 sleep_ticks = 0;
 
 
 	pr = __get_cpu_var(processors);
@@ -951,7 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	if (acpi_idle_suspend)
 		return(acpi_idle_enter_c1(dev, state));
 
-	if (acpi_idle_bm_check()) {
+	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
 		if (dev->safe_state) {
 			dev->last_state = dev->safe_state;
 			return dev->safe_state->enter(dev, dev->safe_state);
@@ -1022,11 +1026,10 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		spin_unlock(&c3_lock);
 	}
 	kt2 = ktime_get_real();
-	idle_time_ns = ktime_to_us(ktime_sub(kt2, kt1));
+	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
-	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -1037,7 +1040,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	cx->usage++;
 
 	lapic_timer_state_broadcast(pr, cx, 0);
-	cx->time += sleep_ticks;
+	cx->time += idle_time;
 	return idle_time;
 }
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4ab2275b446..2862c781b37 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -82,6 +82,20 @@ static int acpi_sleep_prepare(u32 acpi_state)
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
 /*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume.  Windows does that also for
+ * suspend to RAM.  However, it is known that this mechanism does not work on
+ * all machines, so we allow the user to disable it with the help of the
+ * 'acpi_sleep=nonvs' kernel command line option.
+ */
+static bool nvs_nosave;
+
+void __init acpi_nvs_nosave(void)
+{
+	nvs_nosave = true;
+}
+
+/*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
  * kernel command line option that causes the following variable to be set.
@@ -94,11 +108,13 @@ void __init acpi_old_suspend_ordering(void)
 }
 
 /**
- *	acpi_pm_disable_gpes - Disable the GPEs.
+ * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
  */
-static int acpi_pm_disable_gpes(void)
+static int acpi_pm_freeze(void)
 {
 	acpi_disable_all_gpes();
+	acpi_os_wait_events_complete(NULL);
+	acpi_ec_block_transactions();
 	return 0;
 }
 
@@ -112,6 +128,8 @@ static int __acpi_pm_prepare(void)
 {
 	int error = acpi_sleep_prepare(acpi_target_sleep_state);
 
+	suspend_nvs_save();
+
 	if (error)
 		acpi_target_sleep_state = ACPI_STATE_S0;
 	return error;
@@ -126,7 +144,8 @@ static int acpi_pm_prepare(void)
 	int error = __acpi_pm_prepare();
 
 	if (!error)
-		acpi_disable_all_gpes();
+		acpi_pm_freeze();
+
 	return error;
 }
 
@@ -140,6 +159,9 @@ static void acpi_pm_finish(void)
 {
 	u32 acpi_state = acpi_target_sleep_state;
 
+	suspend_nvs_free();
+	acpi_ec_unblock_transactions();
+
 	if (acpi_state == ACPI_STATE_S0)
 		return;
 
@@ -189,6 +211,10 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
 	u32 acpi_state = acpi_suspend_states[pm_state];
 	int error = 0;
 
+	error = nvs_nosave ? 0 : suspend_nvs_alloc();
+	if (error)
+		return error;
+
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -256,6 +282,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
 	 * acpi_leave_sleep_state will reenable specific GPEs later
 	 */
 	acpi_disable_all_gpes();
+	/* Allow EC transactions to happen. */
+	acpi_ec_unblock_transactions_early();
 
 	local_irq_restore(flags);
 	printk(KERN_DEBUG "Back to C!\n");
@@ -264,9 +292,16 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
 	if (acpi_state == ACPI_STATE_S3)
 		acpi_restore_state_mem();
 
+	suspend_nvs_restore();
+
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
+static void acpi_suspend_finish(void)
+{
+	acpi_pm_finish();
+}
+
 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 {
 	u32 acpi_state;
@@ -288,7 +323,7 @@ static struct platform_suspend_ops acpi_suspend_ops = {
 	.begin = acpi_suspend_begin,
 	.prepare_late = acpi_pm_prepare,
 	.enter = acpi_suspend_enter,
-	.wake = acpi_pm_finish,
+	.wake = acpi_suspend_finish,
 	.end = acpi_pm_end,
 };
 
@@ -314,9 +349,9 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state)
 static struct platform_suspend_ops acpi_suspend_ops_old = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin_old,
-	.prepare_late = acpi_pm_disable_gpes,
+	.prepare_late = acpi_pm_freeze,
 	.enter = acpi_suspend_enter,
-	.wake = acpi_pm_finish,
+	.wake = acpi_suspend_finish,
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
@@ -366,20 +401,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume.  However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
-	s4_no_nvs = true;
-}
-
 static unsigned long s4_hardware_signature;
 static struct acpi_table_facs *facs;
 static bool nosigcheck;
@@ -393,7 +414,7 @@ static int acpi_hibernation_begin(void)
 {
 	int error;
 
-	error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
+	error = nvs_nosave ? 0 : suspend_nvs_alloc();
 	if (!error) {
 		acpi_target_sleep_state = ACPI_STATE_S4;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -407,7 +428,7 @@ static int acpi_hibernation_pre_snapshot(void)
 	int error = acpi_pm_prepare();
 
 	if (!error)
-		hibernate_nvs_save();
+		suspend_nvs_save();
 
 	return error;
 }
@@ -430,12 +451,6 @@ static int acpi_hibernation_enter(void)
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
-static void acpi_hibernation_finish(void)
-{
-	hibernate_nvs_free();
-	acpi_pm_finish();
-}
-
 static void acpi_hibernation_leave(void)
 {
 	/*
@@ -452,20 +467,14 @@ static void acpi_hibernation_leave(void)
 		panic("ACPI S4 hardware signature mismatch");
 	}
 	/* Restore the NVS memory area */
-	hibernate_nvs_restore();
-}
-
-static int acpi_pm_pre_restore(void)
-{
-	acpi_disable_all_gpes();
-	acpi_os_wait_events_complete(NULL);
-	acpi_ec_suspend_transactions();
-	return 0;
+	suspend_nvs_restore();
+	/* Allow EC transactions to happen. */
+	acpi_ec_unblock_transactions_early();
 }
 
-static void acpi_pm_restore_cleanup(void)
+static void acpi_pm_thaw(void)
 {
-	acpi_ec_resume_transactions();
+	acpi_ec_unblock_transactions();
 	acpi_enable_all_runtime_gpes();
 }
 
@@ -473,12 +482,12 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.begin = acpi_hibernation_begin,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot,
-	.finish = acpi_hibernation_finish,
+	.finish = acpi_pm_finish,
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_pre_restore,
-	.restore_cleanup = acpi_pm_restore_cleanup,
+	.pre_restore = acpi_pm_freeze,
+	.restore_cleanup = acpi_pm_thaw,
 };
 
 /**
@@ -500,8 +509,8 @@ static int acpi_hibernation_begin_old(void)
 	error = acpi_sleep_prepare(ACPI_STATE_S4);
 
 	if (!error) {
-		if (!s4_no_nvs)
-			error = hibernate_nvs_alloc();
+		if (!nvs_nosave)
+			error = suspend_nvs_alloc();
 		if (!error)
 			acpi_target_sleep_state = ACPI_STATE_S4;
 	}
@@ -510,12 +519,9 @@ static int acpi_hibernation_begin_old(void)
 
 static int acpi_hibernation_pre_snapshot_old(void)
 {
-	int error = acpi_pm_disable_gpes();
-
-	if (!error)
-		hibernate_nvs_save();
-
-	return error;
+	acpi_pm_freeze();
+	suspend_nvs_save();
+	return 0;
 }
 
 /*
@@ -526,12 +532,12 @@ static struct platform_hibernation_ops acpi_hibernation_ops_old = {
 	.begin = acpi_hibernation_begin_old,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot_old,
-	.finish = acpi_hibernation_finish,
-	.prepare = acpi_pm_disable_gpes,
+	.prepare = acpi_pm_freeze,
+	.finish = acpi_pm_finish,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_pre_restore,
-	.restore_cleanup = acpi_pm_restore_cleanup,
+	.pre_restore = acpi_pm_freeze,
+	.restore_cleanup = acpi_pm_thaw,
 	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index c79e789ed03..f8db50a0941 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -388,10 +388,12 @@ static ssize_t counter_set(struct kobject *kobj,
 	if (index < num_gpes) {
 		if (!strcmp(buf, "disable\n") &&
 				(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
+			result = acpi_disable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "enable\n") &&
 				!(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
+			result = acpi_enable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "clear\n") &&
 				(status & ACPI_EVENT_FLAG_SET))
 			result = acpi_clear_gpe(handle, index);
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 4b9d339a6e2..388747a7ef4 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -64,16 +64,13 @@ void acpi_enable_wakeup_device(u8 sleep_state)
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid)
-			continue;
-
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
+		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
 		    || sleep_state > (u32) dev->wakeup.sleep_state)
 			continue;
 
 		/* The wake-up power should have been enabled already. */
-		acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
-				ACPI_GPE_ENABLE);
+		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 	}
 }
 
@@ -96,6 +93,8 @@ void acpi_disable_wakeup_device(u8 sleep_state)
 		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
+		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 		acpi_disable_wakeup_device_power(dev);
 	}
 }
@@ -109,13 +108,8 @@ int __init acpi_wakeup_device_init(void)
 		struct acpi_device *dev = container_of(node,
 						       struct acpi_device,
 						       wakeup_list);
-		/* In case user doesn't load button driver */
-		if (!dev->wakeup.flags.always_enabled ||
-		    dev->wakeup.state.enabled)
-			continue;
- 		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
- 				ACPI_GPE_TYPE_WAKE);
-		dev->wakeup.state.enabled = 1;
+		if (dev->wakeup.flags.always_enabled)
+			dev->wakeup.state.enabled = 1;
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index f60b2b6a093..d31590e7011 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -122,6 +122,31 @@ static int __init amba_init(void)
 
 postcore_initcall(amba_init);
 
+static int amba_get_enable_pclk(struct amba_device *pcdev)
+{
+	struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
+	int ret;
+
+	pcdev->pclk = pclk;
+
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+
+	ret = clk_enable(pclk);
+	if (ret)
+		clk_put(pclk);
+
+	return ret;
+}
+
+static void amba_put_disable_pclk(struct amba_device *pcdev)
+{
+	struct clk *pclk = pcdev->pclk;
+
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -130,17 +155,33 @@ static int amba_probe(struct device *dev)
 {
 	struct amba_device *pcdev = to_amba_device(dev);
 	struct amba_driver *pcdrv = to_amba_driver(dev->driver);
-	struct amba_id *id;
+	struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+	int ret;
 
-	id = amba_lookup(pcdrv->id_table, pcdev);
+	do {
+		ret = amba_get_enable_pclk(pcdev);
+		if (ret)
+			break;
+
+		ret = pcdrv->probe(pcdev, id);
+		if (ret == 0)
+			break;
 
-	return pcdrv->probe(pcdev, id);
+		amba_put_disable_pclk(pcdev);
+	} while (0);
+
+	return ret;
 }
 
 static int amba_remove(struct device *dev)
 {
+	struct amba_device *pcdev = to_amba_device(dev);
 	struct amba_driver *drv = to_amba_driver(dev->driver);
-	return drv->remove(to_amba_device(dev));
+	int ret = drv->remove(pcdev);
+
+	amba_put_disable_pclk(pcdev);
+
+	return ret;
 }
 
 static void amba_shutdown(struct device *dev)
@@ -203,7 +244,6 @@ static void amba_device_release(struct device *dev)
  */
 int amba_device_register(struct amba_device *dev, struct resource *parent)
 {
-	u32 pid, cid;
 	u32 size;
 	void __iomem *tmp;
 	int i, ret;
@@ -241,25 +281,35 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 		goto err_release;
 	}
 
-	/*
-	 * Read pid and cid based on size of resource
-	 * they are located at end of region
-	 */
-	for (pid = 0, i = 0; i < 4; i++)
-		pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
-	for (cid = 0, i = 0; i < 4; i++)
-		cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
+	ret = amba_get_enable_pclk(dev);
+	if (ret == 0) {
+		u32 pid, cid;
 
-	iounmap(tmp);
+		/*
+		 * Read pid and cid based on size of resource
+		 * they are located at end of region
+		 */
+		for (pid = 0, i = 0; i < 4; i++)
+			pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
+				(i * 8);
+		for (cid = 0, i = 0; i < 4; i++)
+			cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
+				(i * 8);
 
-	if (cid == 0xb105f00d)
-		dev->periphid = pid;
+		amba_put_disable_pclk(dev);
 
-	if (!dev->periphid) {
-		ret = -ENODEV;
-		goto err_release;
+		if (cid == 0xb105f00d)
+			dev->periphid = pid;
+
+		if (!dev->periphid)
+			ret = -ENODEV;
 	}
 
+	iounmap(tmp);
+
+	if (ret)
+		goto err_release;
+
 	ret = device_add(&dev->dev);
 	if (ret)
 		goto err_release;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 73f883333a0..aa85a98d3a4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -168,10 +168,10 @@ config ATA_BMDMA
 	default y
 	help
 	  This option adds support for SFF ATA controllers with BMDMA
-	  capability.  BMDMA stands for bus-master DMA and the
-	  de-facto DMA interface for SFF controllers.
+	  capability.  BMDMA stands for bus-master DMA and is the
+	  de facto DMA interface for SFF controllers.
 
-	  If unuser, say Y.
+	  If unsure, say Y.
 
 if ATA_BMDMA
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8ca16f54e1e..f2522534ae6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1053,6 +1053,16 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
 		return -ENODEV;
 
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
+	    pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
+	    pdev->subsystem_device == 0xcb89)
+		return -ENODEV;
+
 	/* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
 	 * At the moment, we can only use the AHCI mode. Let the users know
 	 * that for SAS drives they're out of luck.
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 573158a9668..7107a6929de 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,6 +32,11 @@
  *	A generic parallel ATA driver using libata
  */
 
+enum {
+	ATA_GEN_CLASS_MATCH		= (1 << 0),
+	ATA_GEN_FORCE_DMA		= (1 << 1),
+};
+
 /**
  *	generic_set_mode	-	mode setting
  *	@link: link to set up
@@ -46,13 +51,17 @@
 static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
 	struct ata_port *ap = link->ap;
+	const struct pci_device_id *id = ap->host->private_data;
 	int dma_enabled = 0;
 	struct ata_device *dev;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-	/* Bits 5 and 6 indicate if DMA is active on master/slave */
-	if (ap->ioaddr.bmdma_addr)
+	if (id->driver_data & ATA_GEN_FORCE_DMA) {
+		dma_enabled = 0xff;
+	} else if (ap->ioaddr.bmdma_addr) {
+		/* Bits 5 and 6 indicate if DMA is active on master/slave */
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
 		dma_enabled = 0xFF;
@@ -126,7 +135,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	/* Don't use the generic entry unless instructed to do so */
-	if (id->driver_data == 1 && all_generic_ide == 0)
+	if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
 		return -ENODEV;
 
 	/* Devices that need care */
@@ -155,7 +164,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 			return rc;
 		pcim_pin_device(dev);
 	}
-	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0);
 }
 
 static struct pci_device_id ata_generic[] = {
@@ -167,7 +176,15 @@ static struct pci_device_id ata_generic[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_HINT,   PCI_DEVICE_ID_HINT_VXPROII_IDE), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+	  .driver_data = ATA_GEN_FORCE_DMA },
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
+	  PCI_VENDOR_ID_APPLE, 0xcb89,
+	  .driver_data = ATA_GEN_FORCE_DMA },
 #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
@@ -175,7 +192,8 @@ static struct pci_device_id ata_generic[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),  },
 #endif	
 	/* Must come last. If you add entries adjust this table appropriately */
-	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+	  .driver_data = ATA_GEN_CLASS_MATCH },
 	{ 0, },
 };
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1984a6e89e8..81e772a94d5 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -324,6 +324,7 @@ static ssize_t ahci_store_em_buffer(struct device *dev,
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	void __iomem *em_mmio = mmio + hpriv->em_loc;
+	const unsigned char *msg_buf = buf;
 	u32 em_ctl, msg;
 	unsigned long flags;
 	int i;
@@ -343,8 +344,8 @@ static ssize_t ahci_store_em_buffer(struct device *dev,
 	}
 
 	for (i = 0; i < size; i += 4) {
-		msg = buf[i] | buf[i + 1] << 8 |
-		      buf[i + 2] << 16 | buf[i + 3] << 24;
+		msg = msg_buf[i] | msg_buf[i + 1] << 8 |
+		      msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24;
 		writel(msg, em_mmio + i);
 	}
 
@@ -541,29 +542,11 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 	return -EINVAL;
 }
 
-static int ahci_is_device_present(void __iomem *port_mmio)
-{
-	u8 status = readl(port_mmio + PORT_TFDATA) & 0xff;
-
-	/* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */
-	if (status & (ATA_BUSY | ATA_DRQ))
-		return 0;
-
-	/* Make sure PxSSTS.DET is 3h */
-	status = readl(port_mmio + PORT_SCR_STAT) & 0xf;
-	if (status != 3)
-		return 0;
-	return 1;
-}
-
 void ahci_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
-	if (!ahci_is_device_present(port_mmio))
-		return;
-
 	/* start DMA */
 	tmp = readl(port_mmio + PORT_CMD);
 	tmp |= PORT_CMD_START;
@@ -1892,6 +1875,9 @@ static void ahci_error_handler(struct ata_port *ap)
 	}
 
 	sata_pmp_error_handler(ap);
+
+	if (!ata_dev_enabled(ap->link.device))
+		ahci_stop_engine(ap);
 }
 
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 06b7e49e039..ddf8e486278 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4119,9 +4119,8 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 	    dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
 		ata_dev_printk(dev, KERN_WARNING,
 			       "new n_sectors matches native, probably "
-			       "late HPA unlock, continuing\n");
-		/* keep using the old n_sectors */
-		dev->n_sectors = n_sectors;
+			       "late HPA unlock, n_sectors updated\n");
+		/* use the larger n_sectors */
 		return 0;
 	}
 
@@ -6669,6 +6668,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_link_next);
 EXPORT_SYMBOL_GPL(ata_dev_next);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
+EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
 EXPORT_SYMBOL_GPL(ata_host_init);
 EXPORT_SYMBOL_GPL(ata_host_alloc);
 EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index cfa9dd3d725..a54273d2c3c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,35 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 }
 
 /**
+ *	ata_scsi_unlock_native_capacity - unlock native capacity
+ *	@sdev: SCSI device to adjust device capacity for
+ *
+ *	This function is called if a partition on @sdev extends beyond
+ *	the end of the device.  It requests EH to unlock HPA.
+ *
+ *	LOCKING:
+ *	Defined by the SCSI layer.  Might sleep.
+ */
+void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
+{
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (dev && dev->n_sectors < dev->n_native_sectors) {
+		dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+		dev->link->eh_info.action |= ATA_EH_RESET;
+		ata_port_schedule_eh(ap);
+	}
+
+	spin_unlock_irqrestore(ap->lock, flags);
+	ata_port_wait_eh(ap);
+}
+
+/**
  *	ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
  *	@ap: target port
  *	@sdev: SCSI device to get identify data for
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 76640ac7688..75b49d01780 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -1355,8 +1355,11 @@ static struct of_device_id pata_macio_match[] =
 
 static struct macio_driver pata_macio_driver =
 {
-	.name 		= "pata-macio",
-	.match_table	= pata_macio_match,
+	.driver = {
+		.name 		= "pata-macio",
+		.owner		= THIS_MODULE,
+		.of_match_table	= pata_macio_match,
+	},
 	.probe		= pata_macio_attach,
 	.remove		= pata_macio_detach,
 #ifdef CONFIG_PM
@@ -1366,9 +1369,6 @@ static struct macio_driver pata_macio_driver =
 #ifdef CONFIG_PMAC_MEDIABAY
 	.mediabay_event	= pata_macio_mb_event,
 #endif
-	.driver = {
-		.owner		= THIS_MODULE,
-	},
 };
 
 static const struct pci_device_id pata_macio_pci_match[] = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6fd11478411..21161136cad 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1669,7 +1669,6 @@ static void nv_mcp55_freeze(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask &= ~(NV_INT_ALL_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_sff_freeze(ap);
 }
 
 static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1683,7 +1682,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask |= (NV_INT_MASK_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_sff_thaw(ap);
 }
 
 static void nv_adma_error_handler(struct ata_port *ap)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e9250514734..be7726d7686 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -539,12 +539,12 @@ static void sil24_config_port(struct ata_port *ap)
 		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
 
 	/* zero error counters. */
-	writel(0x8000, port + PORT_DECODE_ERR_THRESH);
-	writel(0x8000, port + PORT_CRC_ERR_THRESH);
-	writel(0x8000, port + PORT_HSHK_ERR_THRESH);
-	writel(0x0000, port + PORT_DECODE_ERR_CNT);
-	writel(0x0000, port + PORT_CRC_ERR_CNT);
-	writel(0x0000, port + PORT_HSHK_ERR_CNT);
+	writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+	writew(0x8000, port + PORT_CRC_ERR_THRESH);
+	writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+	writew(0x0000, port + PORT_DECODE_ERR_CNT);
+	writew(0x0000, port + PORT_CRC_ERR_CNT);
+	writew(0x0000, port + PORT_HSHK_ERR_CNT);
 
 	/* always use 64bit activation */
 	writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
@@ -622,6 +622,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 	irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
 	writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
 
+	/*
+	 * The barrier is required to ensure that writes to cmd_block reach
+	 * the memory before the write to PORT_CMD_ACTIVATE.
+	 */
+	wmb();
 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 	writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 
@@ -865,7 +870,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 	} else {
 		prb = &cb->atapi.prb;
 		sge = cb->atapi.sge;
-		memset(cb->atapi.cdb, 0, 32);
+		memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
 		memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
 
 		if (ata_is_data(qc->tf.protocol)) {
@@ -895,6 +900,11 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 	paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
 	activate = port + PORT_CMD_ACTIVATE + tag * 8;
 
+	/*
+	 * The barrier is required to ensure that writes to cmd_block reach
+	 * the memory before the write to PORT_CMD_ACTIVATE.
+	 */
+	wmb();
 	writel((u32)paddr, activate);
 	writel((u64)paddr >> 32, activate + 4);
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 101d8c219ca..4730c42a5ee 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -575,6 +575,33 @@ static void svia_configure(struct pci_dev *pdev)
 		tmp8 |= NATIVE_MODE_ALL;
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
+
+	/*
+	 * vt6421 has problems talking to some drives.  The following
+	 * is the fix from Joseph Chan <JosephChan@via.com.tw>.
+	 *
+	 * When host issues HOLD, device may send up to 20DW of data
+	 * before acknowledging it with HOLDA and the host should be
+	 * able to buffer them in FIFO.  Unfortunately, some WD drives
+	 * send upto 40DW before acknowledging HOLD and, in the
+	 * default configuration, this ends up overflowing vt6421's
+	 * FIFO, making the controller abort the transaction with
+	 * R_ERR.
+	 *
+	 * Rx52[2] is the internal 128DW FIFO Flow control watermark
+	 * adjusting mechanism enable bit and the default value 0
+	 * means host will issue HOLD to device when the left FIFO
+	 * size goes below 32DW.  Setting it to 1 makes the watermark
+	 * 64DW.
+	 *
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
+	 * http://article.gmane.org/gmane.linux.ide/46352
+	 */
+	if (pdev->device == 0x3249) {
+		pci_read_config_byte(pdev, 0x52, &tmp8);
+		tmp8 |= 1 << 2;
+		pci_write_config_byte(pdev, 0x52, tmp8);
+	}
 }
 
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 38bbbd02930..f8e72724dd4 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -673,7 +673,7 @@ static struct kobject *get_device_parent(struct device *dev,
 		 */
 		if (parent == NULL)
 			parent_kobj = virtual_device_parent(dev);
-		else if (parent->class)
+		else if (parent->class && !dev->class->ns_type)
 			return &parent->kobj;
 		else
 			parent_kobj = &parent->kobj;
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 89de75325ce..cbccf9a3cee 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PM)	+= sysfs.o
-obj-$(CONFIG_PM_SLEEP)	+= main.o
+obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_OPS)	+= generic_ops.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 941fcb87e52..5419a49ff13 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -59,6 +59,7 @@ void device_pm_init(struct device *dev)
 {
 	dev->power.status = DPM_ON;
 	init_completion(&dev->power.completion);
+	dev->power.wakeup_count = 0;
 	pm_runtime_init(dev);
 }
 
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index b0ec0e9f27e..b78c401ffa7 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -123,6 +123,45 @@ int pm_runtime_idle(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(pm_runtime_idle);
 
+
+/**
+ * update_pm_runtime_accounting - Update the time accounting of power states
+ * @dev: Device to update the accounting for
+ *
+ * In order to be able to have time accounting of the various power states
+ * (as used by programs such as PowerTOP to show the effectiveness of runtime
+ * PM), we need to track the time spent in each state.
+ * update_pm_runtime_accounting must be called each time before the
+ * runtime_status field is updated, to account the time in the old state
+ * correctly.
+ */
+void update_pm_runtime_accounting(struct device *dev)
+{
+	unsigned long now = jiffies;
+	int delta;
+
+	delta = now - dev->power.accounting_timestamp;
+
+	if (delta < 0)
+		delta = 0;
+
+	dev->power.accounting_timestamp = now;
+
+	if (dev->power.disable_depth > 0)
+		return;
+
+	if (dev->power.runtime_status == RPM_SUSPENDED)
+		dev->power.suspended_jiffies += delta;
+	else
+		dev->power.active_jiffies += delta;
+}
+
+static void __update_runtime_status(struct device *dev, enum rpm_status status)
+{
+	update_pm_runtime_accounting(dev);
+	dev->power.runtime_status = status;
+}
+
 /**
  * __pm_runtime_suspend - Carry out run-time suspend of given device.
  * @dev: Device to suspend.
@@ -197,7 +236,7 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq)
 		goto repeat;
 	}
 
-	dev->power.runtime_status = RPM_SUSPENDING;
+	__update_runtime_status(dev, RPM_SUSPENDING);
 	dev->power.deferred_resume = false;
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) {
@@ -228,7 +267,7 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq)
 	}
 
 	if (retval) {
-		dev->power.runtime_status = RPM_ACTIVE;
+		__update_runtime_status(dev, RPM_ACTIVE);
 		if (retval == -EAGAIN || retval == -EBUSY) {
 			if (dev->power.timer_expires == 0)
 				notify = true;
@@ -237,7 +276,7 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq)
 			pm_runtime_cancel_pending(dev);
 		}
 	} else {
-		dev->power.runtime_status = RPM_SUSPENDED;
+		__update_runtime_status(dev, RPM_SUSPENDED);
 		pm_runtime_deactivate_timer(dev);
 
 		if (dev->parent) {
@@ -381,7 +420,7 @@ int __pm_runtime_resume(struct device *dev, bool from_wq)
 		goto repeat;
 	}
 
-	dev->power.runtime_status = RPM_RESUMING;
+	__update_runtime_status(dev, RPM_RESUMING);
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) {
 		spin_unlock_irq(&dev->power.lock);
@@ -411,10 +450,10 @@ int __pm_runtime_resume(struct device *dev, bool from_wq)
 	}
 
 	if (retval) {
-		dev->power.runtime_status = RPM_SUSPENDED;
+		__update_runtime_status(dev, RPM_SUSPENDED);
 		pm_runtime_cancel_pending(dev);
 	} else {
-		dev->power.runtime_status = RPM_ACTIVE;
+		__update_runtime_status(dev, RPM_ACTIVE);
 		if (parent)
 			atomic_inc(&parent->power.child_count);
 	}
@@ -848,7 +887,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status)
 	}
 
  out_set:
-	dev->power.runtime_status = status;
+	__update_runtime_status(dev, status);
 	dev->power.runtime_error = 0;
  out:
 	spin_unlock_irqrestore(&dev->power.lock, flags);
@@ -1077,6 +1116,7 @@ void pm_runtime_init(struct device *dev)
 	dev->power.request_pending = false;
 	dev->power.request = RPM_REQ_NONE;
 	dev->power.deferred_resume = false;
+	dev->power.accounting_timestamp = jiffies;
 	INIT_WORK(&dev->power.work, pm_runtime_work);
 
 	dev->power.timer_expires = 0;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a4c33bc5125..e56b4388fe6 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -6,6 +6,7 @@
 #include <linux/string.h>
 #include <linux/pm_runtime.h>
 #include <asm/atomic.h>
+#include <linux/jiffies.h>
 #include "power.h"
 
 /*
@@ -73,6 +74,8 @@
  *	device are known to the PM core.  However, for some devices this
  *	attribute is set to "enabled" by bus type code or device drivers and in
  *	that cases it should be safe to leave the default value.
+ *
+ *	wakeup_count - Report the number of wakeup events related to the device
  */
 
 static const char enabled[] = "enabled";
@@ -108,6 +111,65 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr,
 }
 
 static DEVICE_ATTR(control, 0644, control_show, control_store);
+
+static ssize_t rtpm_active_time_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int ret;
+	spin_lock_irq(&dev->power.lock);
+	update_pm_runtime_accounting(dev);
+	ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies));
+	spin_unlock_irq(&dev->power.lock);
+	return ret;
+}
+
+static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL);
+
+static ssize_t rtpm_suspended_time_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int ret;
+	spin_lock_irq(&dev->power.lock);
+	update_pm_runtime_accounting(dev);
+	ret = sprintf(buf, "%i\n",
+		jiffies_to_msecs(dev->power.suspended_jiffies));
+	spin_unlock_irq(&dev->power.lock);
+	return ret;
+}
+
+static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL);
+
+static ssize_t rtpm_status_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	const char *p;
+
+	if (dev->power.runtime_error) {
+		p = "error\n";
+	} else if (dev->power.disable_depth) {
+		p = "unsupported\n";
+	} else {
+		switch (dev->power.runtime_status) {
+		case RPM_SUSPENDED:
+			p = "suspended\n";
+			break;
+		case RPM_SUSPENDING:
+			p = "suspending\n";
+			break;
+		case RPM_RESUMING:
+			p = "resuming\n";
+			break;
+		case RPM_ACTIVE:
+			p = "active\n";
+			break;
+		default:
+			return -EIO;
+		}
+	}
+	return sprintf(buf, p);
+}
+
+static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
 #endif
 
 static ssize_t
@@ -144,6 +206,16 @@ wake_store(struct device * dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
+#ifdef CONFIG_PM_SLEEP
+static ssize_t wakeup_count_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", dev->power.wakeup_count);
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+#endif
+
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 #ifdef CONFIG_PM_RUNTIME
 
@@ -172,27 +244,8 @@ static ssize_t rtpm_enabled_show(struct device *dev,
 	return sprintf(buf, "enabled\n");
 }
 
-static ssize_t rtpm_status_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	if (dev->power.runtime_error)
-		return sprintf(buf, "error\n");
-	switch (dev->power.runtime_status) {
-	case RPM_SUSPENDED:
-		return sprintf(buf, "suspended\n");
-	case RPM_SUSPENDING:
-		return sprintf(buf, "suspending\n");
-	case RPM_RESUMING:
-		return sprintf(buf, "resuming\n");
-	case RPM_ACTIVE:
-		return sprintf(buf, "active\n");
-	}
-	return -EIO;
-}
-
 static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
 static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
-static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
 static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
 
 #endif
@@ -228,14 +281,19 @@ static DEVICE_ATTR(async, 0644, async_show, async_store);
 static struct attribute * power_attrs[] = {
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_control.attr,
+	&dev_attr_runtime_status.attr,
+	&dev_attr_runtime_suspended_time.attr,
+	&dev_attr_runtime_active_time.attr,
 #endif
 	&dev_attr_wakeup.attr,
+#ifdef CONFIG_PM_SLEEP
+	&dev_attr_wakeup_count.attr,
+#endif
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 	&dev_attr_async.attr,
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_runtime_usage.attr,
 	&dev_attr_runtime_active_kids.attr,
-	&dev_attr_runtime_status.attr,
 	&dev_attr_runtime_enabled.attr,
 #endif
 #endif
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
new file mode 100644
index 00000000000..eb594facfc3
--- /dev/null
+++ b/drivers/base/power/wakeup.c
@@ -0,0 +1,247 @@
+/*
+ * drivers/base/power/wakeup.c - System wakeup events framework
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/suspend.h>
+#include <linux/pm.h>
+
+/*
+ * If set, the suspend/hibernate code will abort transitions to a sleep state
+ * if wakeup events are registered during or immediately before the transition.
+ */
+bool events_check_enabled;
+
+/* The counter of registered wakeup events. */
+static unsigned long event_count;
+/* A preserved old value of event_count. */
+static unsigned long saved_event_count;
+/* The counter of wakeup events being processed. */
+static unsigned long events_in_progress;
+
+static DEFINE_SPINLOCK(events_lock);
+
+static void pm_wakeup_timer_fn(unsigned long data);
+
+static DEFINE_TIMER(events_timer, pm_wakeup_timer_fn, 0, 0);
+static unsigned long events_timer_expires;
+
+/*
+ * The functions below use the observation that each wakeup event starts a
+ * period in which the system should not be suspended.  The moment this period
+ * will end depends on how the wakeup event is going to be processed after being
+ * detected and all of the possible cases can be divided into two distinct
+ * groups.
+ *
+ * First, a wakeup event may be detected by the same functional unit that will
+ * carry out the entire processing of it and possibly will pass it to user space
+ * for further processing.  In that case the functional unit that has detected
+ * the event may later "close" the "no suspend" period associated with it
+ * directly as soon as it has been dealt with.  The pair of pm_stay_awake() and
+ * pm_relax(), balanced with each other, is supposed to be used in such
+ * situations.
+ *
+ * Second, a wakeup event may be detected by one functional unit and processed
+ * by another one.  In that case the unit that has detected it cannot really
+ * "close" the "no suspend" period associated with it, unless it knows in
+ * advance what's going to happen to the event during processing.  This
+ * knowledge, however, may not be available to it, so it can simply specify time
+ * to wait before the system can be suspended and pass it as the second
+ * argument of pm_wakeup_event().
+ */
+
+/**
+ * pm_stay_awake - Notify the PM core that a wakeup event is being processed.
+ * @dev: Device the wakeup event is related to.
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) by incrementing the
+ * counter of wakeup events being processed.  If @dev is not NULL, the counter
+ * of wakeup events related to @dev is incremented too.
+ *
+ * Call this function after detecting of a wakeup event if pm_relax() is going
+ * to be called directly after processing the event (and possibly passing it to
+ * user space for further processing).
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_stay_awake(struct device *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (dev)
+		dev->power.wakeup_count++;
+
+	events_in_progress++;
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ *
+ * Notify the PM core that a wakeup event has been processed by decrementing
+ * the counter of wakeup events being processed and incrementing the counter
+ * of registered wakeup events.
+ *
+ * Call this function for wakeup events whose processing started with calling
+ * pm_stay_awake().
+ *
+ * It is safe to call it from interrupt context.
+ */
+void pm_relax(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_in_progress) {
+		events_in_progress--;
+		event_count++;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_timer_fn - Delayed finalization of a wakeup event.
+ *
+ * Decrease the counter of wakeup events being processed after it was increased
+ * by pm_wakeup_event().
+ */
+static void pm_wakeup_timer_fn(unsigned long data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_timer_expires
+	    && time_before_eq(events_timer_expires, jiffies)) {
+		events_in_progress--;
+		events_timer_expires = 0;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @dev: Device the wakeup event is related to.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) that will take
+ * approximately @msec milliseconds to be processed by the kernel.  Increment
+ * the counter of registered wakeup events and (if @msec is nonzero) set up
+ * the wakeup events timer to execute pm_wakeup_timer_fn() in future (if the
+ * timer has not been set up already, increment the counter of wakeup events
+ * being processed).  If @dev is not NULL, the counter of wakeup events related
+ * to @dev is incremented too.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	event_count++;
+	if (dev)
+		dev->power.wakeup_count++;
+
+	if (msec) {
+		unsigned long expires;
+
+		expires = jiffies + msecs_to_jiffies(msec);
+		if (!expires)
+			expires = 1;
+
+		if (!events_timer_expires
+		    || time_after(expires, events_timer_expires)) {
+			if (!events_timer_expires)
+				events_in_progress++;
+
+			mod_timer(&events_timer, expires);
+			events_timer_expires = expires;
+		}
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_check_wakeup_events - Check for new wakeup events.
+ *
+ * Compare the current number of registered wakeup events with its preserved
+ * value from the past to check if new wakeup events have been registered since
+ * the old value was stored.  Check if the current number of wakeup events being
+ * processed is zero.
+ */
+bool pm_check_wakeup_events(void)
+{
+	unsigned long flags;
+	bool ret = true;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_check_enabled) {
+		ret = (event_count == saved_event_count) && !events_in_progress;
+		events_check_enabled = ret;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+	return ret;
+}
+
+/**
+ * pm_get_wakeup_count - Read the number of registered wakeup events.
+ * @count: Address to store the value at.
+ *
+ * Store the number of registered wakeup events at the address in @count.  Block
+ * if the current number of wakeup events being processed is nonzero.
+ *
+ * Return false if the wait for the number of wakeup events being processed to
+ * drop down to zero has been interrupted by a signal (and the current number
+ * of wakeup events being processed is still nonzero).  Otherwise return true.
+ */
+bool pm_get_wakeup_count(unsigned long *count)
+{
+	bool ret;
+
+	spin_lock_irq(&events_lock);
+	if (capable(CAP_SYS_ADMIN))
+		events_check_enabled = false;
+
+	while (events_in_progress && !signal_pending(current)) {
+		spin_unlock_irq(&events_lock);
+
+		schedule_timeout_interruptible(msecs_to_jiffies(100));
+
+		spin_lock_irq(&events_lock);
+	}
+	*count = event_count;
+	ret = !events_in_progress;
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
+
+/**
+ * pm_save_wakeup_count - Save the current number of registered wakeup events.
+ * @count: Value to compare with the current number of registered wakeup events.
+ *
+ * If @count is equal to the current number of registered wakeup events and the
+ * current number of wakeup events being processed is zero, store @count as the
+ * old number of registered wakeup events to be used by pm_check_wakeup_events()
+ * and return true.  Otherwise return false.
+ */
+bool pm_save_wakeup_count(unsigned long count)
+{
+	bool ret = false;
+
+	spin_lock_irq(&events_lock);
+	if (count == event_count && !events_in_progress) {
+		saved_event_count = count;
+		events_check_enabled = true;
+		ret = true;
+	}
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 6081e81d573..f1bf79d9bc0 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -133,6 +133,28 @@ static struct page *brd_insert_page(struct brd_device *brd, sector_t sector)
 	return page;
 }
 
+static void brd_free_page(struct brd_device *brd, sector_t sector)
+{
+	struct page *page;
+	pgoff_t idx;
+
+	spin_lock(&brd->brd_lock);
+	idx = sector >> PAGE_SECTORS_SHIFT;
+	page = radix_tree_delete(&brd->brd_pages, idx);
+	spin_unlock(&brd->brd_lock);
+	if (page)
+		__free_page(page);
+}
+
+static void brd_zero_page(struct brd_device *brd, sector_t sector)
+{
+	struct page *page;
+
+	page = brd_lookup_page(brd, sector);
+	if (page)
+		clear_highpage(page);
+}
+
 /*
  * Free all backing store pages and radix tree. This must only be called when
  * there are no other users of the device.
@@ -189,6 +211,24 @@ static int copy_to_brd_setup(struct brd_device *brd, sector_t sector, size_t n)
 	return 0;
 }
 
+static void discard_from_brd(struct brd_device *brd,
+			sector_t sector, size_t n)
+{
+	while (n >= PAGE_SIZE) {
+		/*
+		 * Don't want to actually discard pages here because
+		 * re-allocating the pages can result in writeback
+		 * deadlocks under heavy load.
+		 */
+		if (0)
+			brd_free_page(brd, sector);
+		else
+			brd_zero_page(brd, sector);
+		sector += PAGE_SIZE >> SECTOR_SHIFT;
+		n -= PAGE_SIZE;
+	}
+}
+
 /*
  * Copy n bytes from src to the brd starting at sector. Does not sleep.
  */
@@ -300,6 +340,12 @@ static int brd_make_request(struct request_queue *q, struct bio *bio)
 						get_capacity(bdev->bd_disk))
 		goto out;
 
+	if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+		err = 0;
+		discard_from_brd(brd, sector, bio->bi_size);
+		goto out;
+	}
+
 	rw = bio_rw(bio);
 	if (rw == READA)
 		rw = READ;
@@ -320,7 +366,7 @@ out:
 }
 
 #ifdef CONFIG_BLK_DEV_XIP
-static int brd_direct_access (struct block_device *bdev, sector_t sector,
+static int brd_direct_access(struct block_device *bdev, sector_t sector,
 			void **kaddr, unsigned long *pfn)
 {
 	struct brd_device *brd = bdev->bd_disk->private_data;
@@ -437,6 +483,11 @@ static struct brd_device *brd_alloc(int i)
 	blk_queue_max_hw_sectors(brd->brd_queue, 1024);
 	blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
 
+	brd->brd_queue->limits.discard_granularity = PAGE_SIZE;
+	brd->brd_queue->limits.max_discard_sectors = UINT_MAX;
+	brd->brd_queue->limits.discard_zeroes_data = 1;
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, brd->brd_queue);
+
 	disk = brd->brd_disk = alloc_disk(1 << part_shift);
 	if (!disk)
 		goto out_free_queue;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e1d0e2cfec7..72dae92f3ca 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -188,11 +188,11 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *cmd)
 
 	sa = h->scsi_ctlr;
 	stk = &sa->cmd_stack; 
+	stk->top++;
 	if (stk->top >= CMD_STACK_SIZE) {
 		printk("cciss: scsi_cmd_free called too many times.\n");
 		BUG();
 	}
-	stk->top++;
 	stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
 }
 
@@ -861,6 +861,7 @@ cciss_scsi_detect(int ctlr)
 	sh->n_io_port = 0;	// I don't think we use these two...
 	sh->this_id = SELF_SCSI_ID;  
 	sh->sg_tablesize = hba[ctlr]->maxsgentries;
+	sh->max_cmd_len = MAX_COMMAND_SIZE;
 
 	((struct cciss_scsi_adapter_data_t *) 
 		hba[ctlr]->scsi_ctlr)->scsi_host = sh;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 91d11631cec..abb4ec6690f 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -386,7 +386,7 @@ static void __devexit cpqarray_remove_one_eisa (int i)
 }
 
 /* pdev is NULL for eisa */
-static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev)
+static int __devinit cpqarray_register_ctlr( int i, struct pci_dev *pdev)
 {
 	struct request_queue *q;
 	int j;
@@ -503,7 +503,7 @@ Enomem4:
 	return -1;
 }
 
-static int __init cpqarray_init_one( struct pci_dev *pdev,
+static int __devinit cpqarray_init_one( struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
 	int i;
@@ -740,7 +740,7 @@ __setup("smart2=", cpqarray_setup);
 /*
  * Find an EISA controller's signature.  Set up an hba if we find it.
  */
-static int __init cpqarray_eisa_detect(void)
+static int __devinit cpqarray_eisa_detect(void)
 {
 	int i=0, j;
 	__u32 board_id;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index e9654c8d5b6..485ed8c7d62 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -943,8 +943,7 @@ struct drbd_conf {
 	struct drbd_work  resync_work,
 			  unplug_work,
 			  md_sync_work,
-			  delay_probe_work,
-			  uuid_work;
+			  delay_probe_work;
 	struct timer_list resync_timer;
 	struct timer_list md_sync_timer;
 	struct timer_list delay_probe_timer;
@@ -1069,7 +1068,6 @@ struct drbd_conf {
 	struct timeval dps_time; /* delay-probes-start-time */
 	unsigned int dp_volume_last;  /* send_cnt of last delay probe */
 	int c_sync_rate; /* current resync rate after delay_probe magic */
-	atomic_t new_c_uuid;
 };
 
 static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
@@ -1476,7 +1474,6 @@ extern int w_e_end_ov_req(struct drbd_conf *, struct drbd_work *, int);
 extern int w_ov_finished(struct drbd_conf *, struct drbd_work *, int);
 extern int w_resync_inactive(struct drbd_conf *, struct drbd_work *, int);
 extern int w_resume_next_sg(struct drbd_conf *, struct drbd_work *, int);
-extern int w_io_error(struct drbd_conf *, struct drbd_work *, int);
 extern int w_send_write_hint(struct drbd_conf *, struct drbd_work *, int);
 extern int w_make_resync_request(struct drbd_conf *, struct drbd_work *, int);
 extern int w_send_dblock(struct drbd_conf *, struct drbd_work *, int);
@@ -1542,7 +1539,7 @@ static inline void drbd_tcp_nodelay(struct socket *sock)
 
 static inline void drbd_tcp_quickack(struct socket *sock)
 {
-	int __user val = 1;
+	int __user val = 2;
 	(void) drbd_setsockopt(sock, SOL_TCP, TCP_QUICKACK,
 			(char __user *)&val, sizeof(val));
 }
@@ -1728,7 +1725,7 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach,
 	switch (mdev->ldev->dc.on_io_error) {
 	case EP_PASS_ON:
 		if (!forcedetach) {
-			if (printk_ratelimit())
+			if (__ratelimit(&drbd_ratelimit_state))
 				dev_err(DEV, "Local IO failed in %s."
 					     "Passing error on...\n", where);
 			break;
@@ -2219,8 +2216,6 @@ static inline int __inc_ap_bio_cond(struct drbd_conf *mdev)
 		return 0;
 	if (test_bit(BITMAP_IO, &mdev->flags))
 		return 0;
-	if (atomic_read(&mdev->new_c_uuid))
-		return 0;
 	return 1;
 }
 
@@ -2241,9 +2236,6 @@ static inline void inc_ap_bio(struct drbd_conf *mdev, int count)
 	 * to avoid races with the reconnect code,
 	 * we need to atomic_inc within the spinlock. */
 
-	if (atomic_read(&mdev->new_c_uuid) && atomic_add_unless(&mdev->new_c_uuid, -1, 1))
-		drbd_queue_work_front(&mdev->data.work, &mdev->uuid_work);
-
 	spin_lock_irq(&mdev->req_lock);
 	while (!__inc_ap_bio_cond(mdev)) {
 		prepare_to_wait(&mdev->misc_wait, &wait, TASK_UNINTERRUPTIBLE);
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index be2d2da9cdb..7258c95e895 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1215,18 +1215,17 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	     ns.pdsk == D_OUTDATED)) {
 		if (get_ldev(mdev)) {
 			if ((ns.role == R_PRIMARY || ns.peer == R_PRIMARY) &&
-			    mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE &&
-			    !atomic_read(&mdev->new_c_uuid))
-				atomic_set(&mdev->new_c_uuid, 2);
+			    mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE) {
+				drbd_uuid_new_current(mdev);
+				drbd_send_uuids(mdev);
+			}
 			put_ldev(mdev);
 		}
 	}
 
 	if (ns.pdsk < D_INCONSISTENT && get_ldev(mdev)) {
-		/* Diskless peer becomes primary or got connected do diskless, primary peer. */
-		if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0 &&
-		    !atomic_read(&mdev->new_c_uuid))
-			atomic_set(&mdev->new_c_uuid, 2);
+		if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0)
+			drbd_uuid_new_current(mdev);
 
 		/* D_DISKLESS Peer becomes secondary */
 		if (os.peer == R_PRIMARY && ns.peer == R_SECONDARY)
@@ -1237,8 +1236,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	/* Last part of the attaching process ... */
 	if (ns.conn >= C_CONNECTED &&
 	    os.disk == D_ATTACHING && ns.disk == D_NEGOTIATING) {
-		kfree(mdev->p_uuid); /* We expect to receive up-to-date UUIDs soon. */
-		mdev->p_uuid = NULL; /* ...to not use the old ones in the mean time */
 		drbd_send_sizes(mdev, 0, 0);  /* to start sync... */
 		drbd_send_uuids(mdev);
 		drbd_send_state(mdev);
@@ -1350,24 +1347,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	drbd_md_sync(mdev);
 }
 
-static int w_new_current_uuid(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	if (get_ldev(mdev)) {
-		if (mdev->ldev->md.uuid[UI_BITMAP] == 0) {
-			drbd_uuid_new_current(mdev);
-			if (get_net_conf(mdev)) {
-				drbd_send_uuids(mdev);
-				put_net_conf(mdev);
-			}
-			drbd_md_sync(mdev);
-		}
-		put_ldev(mdev);
-	}
-	atomic_dec(&mdev->new_c_uuid);
-	wake_up(&mdev->misc_wait);
-
-	return 1;
-}
 
 static int drbd_thread_setup(void *arg)
 {
@@ -2291,9 +2270,9 @@ static int we_should_drop_the_connection(struct drbd_conf *mdev, struct socket *
  * with page_count == 0 or PageSlab.
  */
 static int _drbd_no_send_page(struct drbd_conf *mdev, struct page *page,
-		   int offset, size_t size)
+		   int offset, size_t size, unsigned msg_flags)
 {
-	int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, 0);
+	int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, msg_flags);
 	kunmap(page);
 	if (sent == size)
 		mdev->send_cnt += size>>9;
@@ -2301,7 +2280,7 @@ static int _drbd_no_send_page(struct drbd_conf *mdev, struct page *page,
 }
 
 static int _drbd_send_page(struct drbd_conf *mdev, struct page *page,
-		    int offset, size_t size)
+		    int offset, size_t size, unsigned msg_flags)
 {
 	mm_segment_t oldfs = get_fs();
 	int sent, ok;
@@ -2314,14 +2293,15 @@ static int _drbd_send_page(struct drbd_conf *mdev, struct page *page,
 	 * __page_cache_release a page that would actually still be referenced
 	 * by someone, leading to some obscure delayed Oops somewhere else. */
 	if (disable_sendpage || (page_count(page) < 1) || PageSlab(page))
-		return _drbd_no_send_page(mdev, page, offset, size);
+		return _drbd_no_send_page(mdev, page, offset, size, msg_flags);
 
+	msg_flags |= MSG_NOSIGNAL;
 	drbd_update_congested(mdev);
 	set_fs(KERNEL_DS);
 	do {
 		sent = mdev->data.socket->ops->sendpage(mdev->data.socket, page,
 							offset, len,
-							MSG_NOSIGNAL);
+							msg_flags);
 		if (sent == -EAGAIN) {
 			if (we_should_drop_the_connection(mdev,
 							  mdev->data.socket))
@@ -2350,9 +2330,11 @@ static int _drbd_send_bio(struct drbd_conf *mdev, struct bio *bio)
 {
 	struct bio_vec *bvec;
 	int i;
+	/* hint all but last page with MSG_MORE */
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		if (!_drbd_no_send_page(mdev, bvec->bv_page,
-				     bvec->bv_offset, bvec->bv_len))
+				     bvec->bv_offset, bvec->bv_len,
+				     i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
 			return 0;
 	}
 	return 1;
@@ -2362,12 +2344,13 @@ static int _drbd_send_zc_bio(struct drbd_conf *mdev, struct bio *bio)
 {
 	struct bio_vec *bvec;
 	int i;
+	/* hint all but last page with MSG_MORE */
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		if (!_drbd_send_page(mdev, bvec->bv_page,
-				     bvec->bv_offset, bvec->bv_len))
+				     bvec->bv_offset, bvec->bv_len,
+				     i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
 			return 0;
 	}
-
 	return 1;
 }
 
@@ -2375,9 +2358,11 @@ static int _drbd_send_zc_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e)
 {
 	struct page *page = e->pages;
 	unsigned len = e->size;
+	/* hint all but last page with MSG_MORE */
 	page_chain_for_each(page) {
 		unsigned l = min_t(unsigned, len, PAGE_SIZE);
-		if (!_drbd_send_page(mdev, page, 0, l))
+		if (!_drbd_send_page(mdev, page, 0, l,
+				page_chain_next(page) ? MSG_MORE : 0))
 			return 0;
 		len -= l;
 	}
@@ -2457,11 +2442,11 @@ int drbd_send_dblock(struct drbd_conf *mdev, struct drbd_request *req)
 	p.dp_flags = cpu_to_be32(dp_flags);
 	set_bit(UNPLUG_REMOTE, &mdev->flags);
 	ok = (sizeof(p) ==
-		drbd_send(mdev, mdev->data.socket, &p, sizeof(p), MSG_MORE));
+		drbd_send(mdev, mdev->data.socket, &p, sizeof(p), dgs ? MSG_MORE : 0));
 	if (ok && dgs) {
 		dgb = mdev->int_dig_out;
 		drbd_csum_bio(mdev, mdev->integrity_w_tfm, req->master_bio, dgb);
-		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
 	}
 	if (ok) {
 		if (mdev->net_conf->wire_protocol == DRBD_PROT_A)
@@ -2510,11 +2495,11 @@ int drbd_send_block(struct drbd_conf *mdev, enum drbd_packets cmd,
 		return 0;
 
 	ok = sizeof(p) == drbd_send(mdev, mdev->data.socket, &p,
-					sizeof(p), MSG_MORE);
+					sizeof(p), dgs ? MSG_MORE : 0);
 	if (ok && dgs) {
 		dgb = mdev->int_dig_out;
 		drbd_csum_ee(mdev, mdev->integrity_w_tfm, e, dgb);
-		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
 	}
 	if (ok)
 		ok = _drbd_send_zc_ee(mdev, e);
@@ -2708,7 +2693,6 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 	atomic_set(&mdev->net_cnt, 0);
 	atomic_set(&mdev->packet_seq, 0);
 	atomic_set(&mdev->pp_in_use, 0);
-	atomic_set(&mdev->new_c_uuid, 0);
 
 	mutex_init(&mdev->md_io_mutex);
 	mutex_init(&mdev->data.mutex);
@@ -2739,14 +2723,12 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 	INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
 	INIT_LIST_HEAD(&mdev->delay_probes);
 	INIT_LIST_HEAD(&mdev->delay_probe_work.list);
-	INIT_LIST_HEAD(&mdev->uuid_work.list);
 
 	mdev->resync_work.cb  = w_resync_inactive;
 	mdev->unplug_work.cb  = w_send_write_hint;
 	mdev->md_sync_work.cb = w_md_sync;
 	mdev->bm_io_work.w.cb = w_bitmap_io;
 	mdev->delay_probe_work.cb = w_delay_probes;
-	mdev->uuid_work.cb = w_new_current_uuid;
 	init_timer(&mdev->resync_timer);
 	init_timer(&mdev->md_sync_timer);
 	init_timer(&mdev->delay_probe_timer);
@@ -3799,7 +3781,7 @@ _drbd_insert_fault(struct drbd_conf *mdev, unsigned int type)
 	if (ret) {
 		fault_count++;
 
-		if (printk_ratelimit())
+		if (__ratelimit(&drbd_ratelimit_state))
 			dev_warn(DEV, "***Simulating %s failure\n",
 				_drbd_fault_str(type));
 	}
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 632e3245d1b..2151f18b21d 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1114,6 +1114,12 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 		mdev->new_state_tmp.i = ns.i;
 		ns.i = os.i;
 		ns.disk = D_NEGOTIATING;
+
+		/* We expect to receive up-to-date UUIDs soon.
+		   To avoid a race in receive_state, free p_uuid while
+		   holding req_lock. I.e. atomic with the state change */
+		kfree(mdev->p_uuid);
+		mdev->p_uuid = NULL;
 	}
 
 	rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index bc9ab7fb2cc..dff48701b84 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -42,7 +42,6 @@
 #include <linux/unistd.h>
 #include <linux/vmalloc.h>
 #include <linux/random.h>
-#include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/scatterlist.h>
 #include "drbd_int.h"
@@ -571,6 +570,25 @@ static int drbd_recv(struct drbd_conf *mdev, void *buf, size_t size)
 	return rv;
 }
 
+/* quoting tcp(7):
+ *   On individual connections, the socket buffer size must be set prior to the
+ *   listen(2) or connect(2) calls in order to have it take effect.
+ * This is our wrapper to do so.
+ */
+static void drbd_setbufsize(struct socket *sock, unsigned int snd,
+		unsigned int rcv)
+{
+	/* open coded SO_SNDBUF, SO_RCVBUF */
+	if (snd) {
+		sock->sk->sk_sndbuf = snd;
+		sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
+	}
+	if (rcv) {
+		sock->sk->sk_rcvbuf = rcv;
+		sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
+	}
+}
+
 static struct socket *drbd_try_connect(struct drbd_conf *mdev)
 {
 	const char *what;
@@ -592,6 +610,8 @@ static struct socket *drbd_try_connect(struct drbd_conf *mdev)
 
 	sock->sk->sk_rcvtimeo =
 	sock->sk->sk_sndtimeo =  mdev->net_conf->try_connect_int*HZ;
+	drbd_setbufsize(sock, mdev->net_conf->sndbuf_size,
+			mdev->net_conf->rcvbuf_size);
 
        /* explicitly bind to the configured IP as source IP
 	*  for the outgoing connections.
@@ -670,6 +690,8 @@ static struct socket *drbd_wait_for_connect(struct drbd_conf *mdev)
 	s_listen->sk->sk_reuse    = 1; /* SO_REUSEADDR */
 	s_listen->sk->sk_rcvtimeo = timeo;
 	s_listen->sk->sk_sndtimeo = timeo;
+	drbd_setbufsize(s_listen, mdev->net_conf->sndbuf_size,
+			mdev->net_conf->rcvbuf_size);
 
 	what = "bind before listen";
 	err = s_listen->ops->bind(s_listen,
@@ -856,16 +878,6 @@ retry:
 	sock->sk->sk_priority = TC_PRIO_INTERACTIVE_BULK;
 	msock->sk->sk_priority = TC_PRIO_INTERACTIVE;
 
-	if (mdev->net_conf->sndbuf_size) {
-		sock->sk->sk_sndbuf = mdev->net_conf->sndbuf_size;
-		sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
-	}
-
-	if (mdev->net_conf->rcvbuf_size) {
-		sock->sk->sk_rcvbuf = mdev->net_conf->rcvbuf_size;
-		sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
-	}
-
 	/* NOT YET ...
 	 * sock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
 	 * sock->sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
@@ -1154,17 +1166,6 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
 	unsigned n_bios = 0;
 	unsigned nr_pages = (ds + PAGE_SIZE -1) >> PAGE_SHIFT;
 
-	if (atomic_read(&mdev->new_c_uuid)) {
-		if (atomic_add_unless(&mdev->new_c_uuid, -1, 1)) {
-			drbd_uuid_new_current(mdev);
-			drbd_md_sync(mdev);
-
-			atomic_dec(&mdev->new_c_uuid);
-			wake_up(&mdev->misc_wait);
-		}
-		wait_event(mdev->misc_wait, !atomic_read(&mdev->new_c_uuid));
-	}
-
 	/* In most cases, we will only need one bio.  But in case the lower
 	 * level restrictions happen to be different at this offset on this
 	 * side than those of the sending peer, we may need to submit the
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 3397f11d0ba..654f1ef5cbb 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -102,32 +102,7 @@ static void _req_is_done(struct drbd_conf *mdev, struct drbd_request *req, const
 		}
 	}
 
-	/* if it was a local io error, we want to notify our
-	 * peer about that, and see if we need to
-	 * detach the disk and stuff.
-	 * to avoid allocating some special work
-	 * struct, reuse the request. */
-
-	/* THINK
-	 * why do we do this not when we detect the error,
-	 * but delay it until it is "done", i.e. possibly
-	 * until the next barrier ack? */
-
-	if (rw == WRITE &&
-	    ((s & RQ_LOCAL_MASK) && !(s & RQ_LOCAL_OK))) {
-		if (!(req->w.list.next == LIST_POISON1 ||
-		      list_empty(&req->w.list))) {
-			/* DEBUG ASSERT only; if this triggers, we
-			 * probably corrupt the worker list here */
-			dev_err(DEV, "req->w.list.next = %p\n", req->w.list.next);
-			dev_err(DEV, "req->w.list.prev = %p\n", req->w.list.prev);
-		}
-		req->w.cb = w_io_error;
-		drbd_queue_work(&mdev->data.work, &req->w);
-		/* drbd_req_free() is done in w_io_error */
-	} else {
-		drbd_req_free(req);
-	}
+	drbd_req_free(req);
 }
 
 static void queue_barrier(struct drbd_conf *mdev)
@@ -453,9 +428,6 @@ void __req_mod(struct drbd_request *req, enum drbd_req_event what,
 		req->rq_state |= RQ_LOCAL_COMPLETED;
 		req->rq_state &= ~RQ_LOCAL_PENDING;
 
-		dev_alert(DEV, "Local WRITE failed sec=%llus size=%u\n",
-		      (unsigned long long)req->sector, req->size);
-		/* and now: check how to handle local io error. */
 		__drbd_chk_io_error(mdev, FALSE);
 		_req_may_be_done(req, m);
 		put_ldev(mdev);
@@ -475,22 +447,21 @@ void __req_mod(struct drbd_request *req, enum drbd_req_event what,
 		req->rq_state |= RQ_LOCAL_COMPLETED;
 		req->rq_state &= ~RQ_LOCAL_PENDING;
 
-		dev_alert(DEV, "Local READ failed sec=%llus size=%u\n",
-		      (unsigned long long)req->sector, req->size);
-		/* _req_mod(req,to_be_send); oops, recursion... */
 		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
-		req->rq_state |= RQ_NET_PENDING;
-		inc_ap_pending(mdev);
 
 		__drbd_chk_io_error(mdev, FALSE);
 		put_ldev(mdev);
-		/* NOTE: if we have no connection,
-		 * or know the peer has no good data either,
-		 * then we don't actually need to "queue_for_net_read",
-		 * but we do so anyways, since the drbd_io_error()
-		 * and the potential state change to "Diskless"
-		 * needs to be done from process context */
 
+		/* no point in retrying if there is no good remote data,
+		 * or we have no connection. */
+		if (mdev->state.pdsk != D_UP_TO_DATE) {
+			_req_may_be_done(req, m);
+			break;
+		}
+
+		/* _req_mod(req,to_be_send); oops, recursion... */
+		req->rq_state |= RQ_NET_PENDING;
+		inc_ap_pending(mdev);
 		/* fall through: _req_mod(req,queue_for_net_read); */
 
 	case queue_for_net_read:
@@ -600,6 +571,9 @@ void __req_mod(struct drbd_request *req, enum drbd_req_event what,
 		_req_may_be_done(req, m);
 		break;
 
+	case read_retry_remote_canceled:
+		req->rq_state &= ~RQ_NET_QUEUED;
+		/* fall through, in case we raced with drbd_disconnect */
 	case connection_lost_while_pending:
 		/* transfer log cleanup after connection loss */
 		/* assert something? */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index 16119d7056c..02d575d2451 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -91,6 +91,7 @@ enum drbd_req_event {
 	send_failed,
 	handed_over_to_network,
 	connection_lost_while_pending,
+	read_retry_remote_canceled,
 	recv_acked_by_peer,
 	write_acked_by_peer,
 	write_acked_by_peer_and_sis, /* and set_in_sync */
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 727ff633975..b623ceee2a4 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -224,9 +224,6 @@ void drbd_endio_pri(struct bio *bio, int error)
 	enum drbd_req_event what;
 	int uptodate = bio_flagged(bio, BIO_UPTODATE);
 
-	if (error)
-		dev_warn(DEV, "p %s: error=%d\n",
-			 bio_data_dir(bio) == WRITE ? "write" : "read", error);
 	if (!error && !uptodate) {
 		dev_warn(DEV, "p %s: setting error to -EIO\n",
 			 bio_data_dir(bio) == WRITE ? "write" : "read");
@@ -257,20 +254,6 @@ void drbd_endio_pri(struct bio *bio, int error)
 		complete_master_bio(mdev, &m);
 }
 
-int w_io_error(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	struct drbd_request *req = container_of(w, struct drbd_request, w);
-
-	/* NOTE: mdev->ldev can be NULL by the time we get here! */
-	/* D_ASSERT(mdev->ldev->dc.on_io_error != EP_PASS_ON); */
-
-	/* the only way this callback is scheduled is from _req_may_be_done,
-	 * when it is done and had a local write error, see comments there */
-	drbd_req_free(req);
-
-	return TRUE;
-}
-
 int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
 {
 	struct drbd_request *req = container_of(w, struct drbd_request, w);
@@ -280,12 +263,9 @@ int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
 	 * to give the disk the chance to relocate that block */
 
 	spin_lock_irq(&mdev->req_lock);
-	if (cancel ||
-	    mdev->state.conn < C_CONNECTED ||
-	    mdev->state.pdsk <= D_INCONSISTENT) {
-		_req_mod(req, send_canceled);
+	if (cancel || mdev->state.pdsk != D_UP_TO_DATE) {
+		_req_mod(req, read_retry_remote_canceled);
 		spin_unlock_irq(&mdev->req_lock);
-		dev_alert(DEV, "WE ARE LOST. Local IO failure, no peer.\n");
 		return 1;
 	}
 	spin_unlock_irq(&mdev->req_lock);
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 52f2d11bc7b..ed6fb91123a 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1159,8 +1159,10 @@ static struct of_device_id swim3_match[] =
 
 static struct macio_driver swim3_driver =
 {
-	.name 		= "swim3",
-	.match_table	= swim3_match,
+	.driver = {
+		.name 		= "swim3",
+		.of_match_table	= swim3_match,
+	},
 	.probe		= swim3_attach,
 #if 0
 	.suspend	= swim3_suspend,
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 83fa09a836c..258bc2ae288 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -298,7 +298,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
 				offsetof(struct virtio_blk_config, seg_max),
 				&sg_elems);
-	if (err)
+
+	/* We need at least one SG element, whatever they say. */
+	if (err || !sg_elems)
 		sg_elems = 1;
 
 	/* We need an extra sg elements at head and tail. */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index f09fc0e2062..7cfcc629a7f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1123,6 +1123,7 @@ source "drivers/s390/char/Kconfig"
 
 config RAMOOPS
 	tristate "Log panic/oops to a RAM buffer"
+	depends on HAS_IOMEM
 	default n
 	help
 	  This enables panic and oops messages to be logged to a circular
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 4b51982fd23..d2abf514398 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -97,20 +97,18 @@ EXPORT_SYMBOL(agp_flush_chipset);
 void agp_alloc_page_array(size_t size, struct agp_memory *mem)
 {
 	mem->pages = NULL;
-	mem->vmalloc_flag = false;
 
 	if (size <= 2*PAGE_SIZE)
-		mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
+		mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
 	if (mem->pages == NULL) {
 		mem->pages = vmalloc(size);
-		mem->vmalloc_flag = true;
 	}
 }
 EXPORT_SYMBOL(agp_alloc_page_array);
 
 void agp_free_page_array(struct agp_memory *mem)
 {
-	if (mem->vmalloc_flag) {
+	if (is_vmalloc_addr(mem->pages)) {
 		vfree(mem->pages);
 	} else {
 		kfree(mem->pages);
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index e8ea6825822..a7547150a70 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1059,7 +1059,7 @@ static void intel_i9xx_setup_flush(void)
 	}
 }
 
-static int intel_i915_configure(void)
+static int intel_i9xx_configure(void)
 {
 	struct aper_size_info_fixed *current_size;
 	u32 temp;
@@ -1207,6 +1207,41 @@ static int intel_i9xx_fetch_size(void)
 	return 0;
 }
 
+static int intel_i915_get_gtt_size(void)
+{
+	int size;
+
+	if (IS_G33) {
+		u16 gmch_ctrl;
+
+		/* G33's GTT size defined in gmch_ctrl */
+		pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl);
+		switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
+		case I830_GMCH_GMS_STOLEN_512:
+			size = 512;
+			break;
+		case I830_GMCH_GMS_STOLEN_1024:
+			size = 1024;
+			break;
+		case I830_GMCH_GMS_STOLEN_8192:
+			size = 8*1024;
+			break;
+		default:
+			dev_info(&agp_bridge->dev->dev,
+				 "unknown page table size 0x%x, assuming 512KB\n",
+				(gmch_ctrl & I830_GMCH_GMS_MASK));
+			size = 512;
+		}
+	} else {
+		/* On previous hardware, the GTT size was just what was
+		 * required to map the aperture.
+		 */
+		size = agp_bridge->driver->fetch_size();
+	}
+
+	return KB(size);
+}
+
 /* The intel i915 automatically initializes the agp aperture during POST.
  * Use the memory already set aside for in the GTT.
  */
@@ -1216,7 +1251,7 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
 	struct aper_size_info_fixed *size;
 	int num_entries;
 	u32 temp, temp2;
-	int gtt_map_size = 256 * 1024;
+	int gtt_map_size;
 
 	size = agp_bridge->current_size;
 	page_order = size->page_order;
@@ -1226,8 +1261,8 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
 	pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
 	pci_read_config_dword(intel_private.pcidev, I915_PTEADDR, &temp2);
 
-	if (IS_G33)
-	    gtt_map_size = 1024 * 1024; /* 1M on G33 */
+	gtt_map_size = intel_i915_get_gtt_size();
+
 	intel_private.gtt = ioremap(temp2, gtt_map_size);
 	if (!intel_private.gtt)
 		return -ENOMEM;
@@ -1422,7 +1457,7 @@ static const struct agp_bridge_driver intel_915_driver = {
 	.size_type		= FIXED_APER_SIZE,
 	.num_aperture_sizes	= 4,
 	.needs_scratch_page	= true,
-	.configure		= intel_i915_configure,
+	.configure		= intel_i9xx_configure,
 	.fetch_size		= intel_i9xx_fetch_size,
 	.cleanup		= intel_i915_cleanup,
 	.mask_memory		= intel_i810_mask_memory,
@@ -1455,7 +1490,7 @@ static const struct agp_bridge_driver intel_i965_driver = {
 	.size_type		= FIXED_APER_SIZE,
 	.num_aperture_sizes	= 4,
 	.needs_scratch_page	= true,
-	.configure		= intel_i915_configure,
+	.configure		= intel_i9xx_configure,
 	.fetch_size		= intel_i9xx_fetch_size,
 	.cleanup		= intel_i915_cleanup,
 	.mask_memory		= intel_i965_mask_memory,
@@ -1488,7 +1523,7 @@ static const struct agp_bridge_driver intel_g33_driver = {
 	.size_type		= FIXED_APER_SIZE,
 	.num_aperture_sizes	= 4,
 	.needs_scratch_page	= true,
-	.configure		= intel_i915_configure,
+	.configure		= intel_i9xx_configure,
 	.fetch_size		= intel_i9xx_fetch_size,
 	.cleanup		= intel_i915_cleanup,
 	.mask_memory		= intel_i965_mask_memory,
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 95db71360d2..f845a8f718b 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -415,7 +415,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 	bridge->gatt_table_real = (u32 *) table;
 	/* Need to clear out any dirty data still sitting in caches */
 	flush_dcache_range((unsigned long)table,
-			   (unsigned long)(table_end + PAGE_SIZE));
+			   (unsigned long)table_end + 1);
 	bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG);
 
 	if (bridge->gatt_table == NULL)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 35603dd4e6c..094bdc355b1 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -302,6 +302,12 @@ struct smi_info {
 
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
+#ifdef CONFIG_PCI
+static int pci_registered;
+#endif
+#ifdef CONFIG_PPC_OF
+static int of_registered;
+#endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
@@ -1018,7 +1024,7 @@ static int ipmi_thread(void *data)
 		else if (smi_result == SI_SM_IDLE)
 			schedule_timeout_interruptible(100);
 		else
-			schedule_timeout_interruptible(0);
+			schedule_timeout_interruptible(1);
 	}
 	return 0;
 }
@@ -3314,6 +3320,8 @@ static __devinit int init_ipmi_si(void)
 	rv = pci_register_driver(&ipmi_pci_driver);
 	if (rv)
 		printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
+	else
+		pci_registered = 1;
 #endif
 
 #ifdef CONFIG_ACPI
@@ -3330,6 +3338,7 @@ static __devinit int init_ipmi_si(void)
 
 #ifdef CONFIG_PPC_OF
 	of_register_platform_driver(&ipmi_of_platform_driver);
+	of_registered = 1;
 #endif
 
 	/* We prefer devices with interrupts, but in the case of a machine
@@ -3383,11 +3392,13 @@ static __devinit int init_ipmi_si(void)
 	if (unload_when_empty && list_empty(&smi_infos)) {
 		mutex_unlock(&smi_infos_lock);
 #ifdef CONFIG_PCI
-		pci_unregister_driver(&ipmi_pci_driver);
+		if (pci_registered)
+			pci_unregister_driver(&ipmi_pci_driver);
 #endif
 
 #ifdef CONFIG_PPC_OF
-		of_unregister_platform_driver(&ipmi_of_platform_driver);
+		if (of_registered)
+			of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
 		driver_unregister(&ipmi_driver.driver);
 		printk(KERN_WARNING PFX
@@ -3478,14 +3489,16 @@ static __exit void cleanup_ipmi_si(void)
 		return;
 
 #ifdef CONFIG_PCI
-	pci_unregister_driver(&ipmi_pci_driver);
+	if (pci_registered)
+		pci_unregister_driver(&ipmi_pci_driver);
 #endif
 #ifdef CONFIG_ACPI
 	pnp_unregister_driver(&ipmi_pnp_driver);
 #endif
 
 #ifdef CONFIG_PPC_OF
-	of_unregister_platform_driver(&ipmi_of_platform_driver);
+	if (of_registered)
+		of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
 
 	mutex_lock(&smi_infos_lock);
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 54109dc9240..25be2102a60 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1315,10 +1315,14 @@ static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
 	if (test_bit(EV_SND, dev->evbit))
 		return true;
 
-	if (test_bit(EV_KEY, dev->evbit))
+	if (test_bit(EV_KEY, dev->evbit)) {
 		for (i = KEY_RESERVED; i < BTN_MISC; i++)
 			if (test_bit(i, dev->keybit))
 				return true;
+		for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++)
+			if (test_bit(i, dev->keybit))
+				return true;
+	}
 
 	return false;
 }
diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c
index c4161d5e053..e4089c432f1 100644
--- a/drivers/char/n_gsm.c
+++ b/drivers/char/n_gsm.c
@@ -904,9 +904,7 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
 	int len;
 	/* Priority ordering: We should do priority with RR of the groups */
 	int i = 1;
-	unsigned long flags;
 
-	spin_lock_irqsave(&gsm->tx_lock, flags);
 	while (i < NUM_DLCI) {
 		struct gsm_dlci *dlci;
 
@@ -927,7 +925,6 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
 		if (len == 0)
 			i++;
 	}
-	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -2230,12 +2227,16 @@ static int gsmld_open(struct tty_struct *tty)
 static void gsmld_write_wakeup(struct tty_struct *tty)
 {
 	struct gsm_mux *gsm = tty->disc_data;
+	unsigned long flags;
 
 	/* Queue poll */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	gsm_data_kick(gsm);
-	if (gsm->tx_bytes < TX_THRESH_LO)
+	if (gsm->tx_bytes < TX_THRESH_LO) {
+		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_dlci_data_sweep(gsm);
+		spin_unlock_irqrestore(&gsm->tx_lock, flags);
+	}
 }
 
 /**
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d15630a583..878ac0c2cc6 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -493,7 +493,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
                 sysrq_key_table[i] = op_p;
 }
 
-static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
 {
 	struct sysrq_key_op *op_p;
 	int orig_log_level;
@@ -580,8 +580,12 @@ static bool sysrq_filter(struct input_handle *handle, unsigned int type,
 	case KEY_RIGHTALT:
 		if (value)
 			sysrq_alt = code;
-		else if (sysrq_down && code == sysrq_alt_use)
-			sysrq_down = false;
+		else {
+			if (sysrq_down && code == sysrq_alt_use)
+				sysrq_down = false;
+
+			sysrq_alt = 0;
+		}
 		break;
 
 	case KEY_SYSRQ:
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8e00b4ddd08..792868d24f2 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -224,6 +224,7 @@ struct	tpm_readpubek_params_out {
 	u8	algorithm[4];
 	u8	encscheme[2];
 	u8	sigscheme[2];
+	__be32	paramsize;
 	u8	parameters[12]; /*assuming RSA*/
 	__be32	keysize;
 	u8	modulus[256];
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 24314a9cffe..1030f842013 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -623,7 +623,14 @@ static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
 
 static int tpm_tis_pnp_resume(struct pnp_dev *dev)
 {
-	return tpm_pm_resume(&dev->dev);
+	struct tpm_chip *chip = pnp_get_drvdata(dev);
+	int ret;
+
+	ret = tpm_pm_resume(&dev->dev);
+	if (!ret)
+		tpm_continue_selftest(chip);
+
+	return ret;
 }
 
 static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 8c99bf1b5e9..942a9826bd2 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -529,6 +529,10 @@ static bool will_write_block(struct port *port)
 {
 	bool ret;
 
+	if (!port->guest_connected) {
+		/* Port got hot-unplugged. Let's exit. */
+		return false;
+	}
 	if (!port->host_connected)
 		return true;
 
@@ -1099,6 +1103,13 @@ static int remove_port(struct port *port)
 {
 	struct port_buffer *buf;
 
+	if (port->guest_connected) {
+		port->guest_connected = false;
+		port->host_connected = false;
+		wake_up_interruptible(&port->waitqueue);
+		send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+	}
+
 	spin_lock_irq(&port->portdev->ports_lock);
 	list_del(&port->list);
 	spin_unlock_irq(&port->portdev->ports_lock);
@@ -1120,9 +1131,6 @@ static int remove_port(struct port *port)
 		hvc_remove(port->cons.hvc);
 #endif
 	}
-	if (port->guest_connected)
-		send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
-
 	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
 	device_destroy(pdrvdata.class, port->dev->devt);
 	cdev_del(&port->cdev);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 6aa10284104..cb19dbc5213 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -1303,7 +1303,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		if (!perm)
 			goto eperm;
 		ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
-		if (!ret)
+		if (ret)
+			ret = -EFAULT;
+		else
 			con_clear_unimap(vc, &ui);
 		break;
 	      }
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d7be69f1315..b7dab32ce63 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -194,6 +194,6 @@ err_timer:
 
 module_init(cs5535_mfgpt_init);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index f6677cb1978..717305d3044 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -412,18 +412,10 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
-	int ret;
 
 	p->total_cycles = 0;
 
-	ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
-	if (ret)
-		return ret;
-
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 0;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_cmt_start(p, FLAG_CLOCKSOURCE);
 }
 
 static void sh_cmt_clocksource_disable(struct clocksource *cs)
@@ -450,8 +442,20 @@ static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
 	cs->resume = sh_cmt_clocksource_resume;
 	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	p->rate = clk_get_rate(p->clk) / (p->width == 16) ? 512 : 8;
+	clk_disable(p->clk);
+
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 0;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
+
 	clocksource_register(cs);
+
 	return 0;
 }
 
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8e44e14ec4c..de715901b82 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@ static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
 static int sh_tmu_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
-	int ret;
-
-	ret = sh_tmu_enable(p);
-	if (ret)
-		return ret;
 
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 10;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_tmu_enable(p);
 }
 
 static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
 	cs->disable = sh_tmu_clocksource_disable;
 	cs->mask = CLOCKSOURCE_MASK(32);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	/* channel will be configured at parent clock / 4 */
+	p->rate = clk_get_rate(p->clk) / 4;
+	clk_disable(p->clk);
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
 	clocksource_register(cs);
 	return 0;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 063b2184caf..199dcb9f0b8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -29,6 +29,8 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 
+#include <trace/events/power.h>
+
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
 						"cpufreq-core", msg)
 
@@ -68,7 +70,7 @@ static DEFINE_PER_CPU(int, cpufreq_policy_cpu);
 static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
 
 #define lock_policy_rwsem(mode, cpu)					\
-int lock_policy_rwsem_##mode						\
+static int lock_policy_rwsem_##mode					\
 (int cpu)								\
 {									\
 	int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu);		\
@@ -83,26 +85,22 @@ int lock_policy_rwsem_##mode						\
 }
 
 lock_policy_rwsem(read, cpu);
-EXPORT_SYMBOL_GPL(lock_policy_rwsem_read);
 
 lock_policy_rwsem(write, cpu);
-EXPORT_SYMBOL_GPL(lock_policy_rwsem_write);
 
-void unlock_policy_rwsem_read(int cpu)
+static void unlock_policy_rwsem_read(int cpu)
 {
 	int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu);
 	BUG_ON(policy_cpu == -1);
 	up_read(&per_cpu(cpu_policy_rwsem, policy_cpu));
 }
-EXPORT_SYMBOL_GPL(unlock_policy_rwsem_read);
 
-void unlock_policy_rwsem_write(int cpu)
+static void unlock_policy_rwsem_write(int cpu)
 {
 	int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu);
 	BUG_ON(policy_cpu == -1);
 	up_write(&per_cpu(cpu_policy_rwsem, policy_cpu));
 }
-EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write);
 
 
 /* internal prototypes */
@@ -354,6 +352,9 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 
 	case CPUFREQ_POSTCHANGE:
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
+		dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
+			(unsigned long)freqs->cpu);
+		trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
 		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
 				CPUFREQ_POSTCHANGE, freqs);
 		if (likely(policy) && likely(policy->cpu == freqs->cpu))
@@ -1077,6 +1078,7 @@ err_out_unregister:
 
 err_unlock_policy:
 	unlock_policy_rwsem_write(cpu);
+	free_cpumask_var(policy->related_cpus);
 err_free_cpumask:
 	free_cpumask_var(policy->cpus);
 err_free_policy:
@@ -1762,17 +1764,8 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			dprintk("governor switch\n");
 
 			/* end old governor */
-			if (data->governor) {
-				/*
-				 * Need to release the rwsem around governor
-				 * stop due to lock dependency between
-				 * cancel_delayed_work_sync and the read lock
-				 * taken in the delayed work handler.
-				 */
-				unlock_policy_rwsem_write(data->cpu);
+			if (data->governor)
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
-				lock_policy_rwsem_write(data->cpu);
-			}
 
 			/* start new governor */
 			data->governor = policy->governor;
@@ -1883,8 +1876,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __refdata cpufreq_cpu_notifier =
-{
+static struct notifier_block __refdata cpufreq_cpu_notifier = {
     .notifier_call = cpufreq_cpu_callback,
 };
 
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index e1314212d8d..7b5093664e4 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -459,6 +459,17 @@ static struct attribute_group dbs_attr_group_old = {
 
 /************************** sysfs end ************************/
 
+static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
+{
+	if (dbs_tuners_ins.powersave_bias)
+		freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
+	else if (p->cur == p->max)
+		return;
+
+	__cpufreq_driver_target(p, freq, dbs_tuners_ins.powersave_bias ?
+			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
 static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 {
 	unsigned int max_load_freq;
@@ -551,19 +562,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 
 	/* Check for frequency increase */
 	if (max_load_freq > dbs_tuners_ins.up_threshold * policy->cur) {
-		/* if we are already at full speed then break out early */
-		if (!dbs_tuners_ins.powersave_bias) {
-			if (policy->cur == policy->max)
-				return;
-
-			__cpufreq_driver_target(policy, policy->max,
-				CPUFREQ_RELATION_H);
-		} else {
-			int freq = powersave_bias_target(policy, policy->max,
-					CPUFREQ_RELATION_H);
-			__cpufreq_driver_target(policy, freq,
-				CPUFREQ_RELATION_L);
-		}
+		dbs_freq_increase(policy, policy->max);
 		return;
 	}
 
@@ -610,7 +609,9 @@ static void do_dbs_timer(struct work_struct *work)
 	/* We want all CPUs to do sampling nearly on same jiffy */
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 
-	delay -= jiffies % delay;
+	if (num_online_cpus() > 1)
+		delay -= jiffies % delay;
+
 	mutex_lock(&dbs_info->timer_mutex);
 
 	/* Common NORMAL_SAMPLE setup */
@@ -635,7 +636,9 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
 {
 	/* We want all CPUs to do sampling nearly on same jiffy */
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-	delay -= jiffies % delay;
+
+	if (num_online_cpus() > 1)
+		delay -= jiffies % delay;
 
 	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
 	INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 199488576a0..dbefe15bd58 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -95,7 +95,7 @@ static void cpuidle_idle_call(void)
 	/* give the governor an opportunity to reflect on the outcome */
 	if (cpuidle_curr_governor->reflect)
 		cpuidle_curr_governor->reflect(dev);
-	trace_power_end(0);
+	trace_power_end(smp_processor_id());
 }
 
 /**
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 52ff8aa63f8..1b128702d30 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -143,7 +143,7 @@ static inline int which_bucket(unsigned int duration)
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(smp_processor_id()))
 		bucket = BUCKETS/2;
 
 	if (duration < 10)
@@ -175,7 +175,7 @@ static inline int performance_multiplier(void)
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(smp_processor_id());
 
 	return mult;
 }
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index 9d65b371de6..983530ba04a 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -1158,7 +1158,7 @@ static int __init crypto4xx_probe(struct of_device *ofdev,
 	struct device *dev = &ofdev->dev;
 	struct crypto4xx_core_device *core_dev;
 
-	rc = of_address_to_resource(ofdev->node, 0, &res);
+	rc = of_address_to_resource(ofdev->dev.of_node, 0, &res);
 	if (rc)
 		return -ENODEV;
 
@@ -1215,13 +1215,13 @@ static int __init crypto4xx_probe(struct of_device *ofdev,
 		     (unsigned long) dev);
 
 	/* Register for Crypto isr, Crypto Engine IRQ */
-	core_dev->irq = irq_of_parse_and_map(ofdev->node, 0);
+	core_dev->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	rc = request_irq(core_dev->irq, crypto4xx_ce_interrupt_handler, 0,
 			 core_dev->dev->name, dev);
 	if (rc)
 		goto err_request_irq;
 
-	core_dev->dev->ce_base = of_iomap(ofdev->node, 0);
+	core_dev->dev->ce_base = of_iomap(ofdev->dev.of_node, 0);
 	if (!core_dev->dev->ce_base) {
 		dev_err(dev, "failed to of_iomap\n");
 		goto err_iomap;
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index 8566be832f5..23163fda503 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -251,16 +251,10 @@ static void n2_base_ctx_init(struct n2_base_ctx *ctx)
 struct n2_hash_ctx {
 	struct n2_base_ctx		base;
 
-	struct crypto_ahash		*fallback;
+	struct crypto_ahash		*fallback_tfm;
+};
 
-	/* These next three members must match the layout created by
-	 * crypto_init_shash_ops_async.  This allows us to properly
-	 * plumb requests we can't do in hardware down to the fallback
-	 * operation, providing all of the data structures and layouts
-	 * expected by those paths.
-	 */
-	struct ahash_request		fallback_req;
-	struct shash_desc		fallback_desc;
+struct n2_hash_req_ctx {
 	union {
 		struct md5_state	md5;
 		struct sha1_state	sha1;
@@ -269,56 +263,62 @@ struct n2_hash_ctx {
 
 	unsigned char			hash_key[64];
 	unsigned char			keyed_zero_hash[32];
+
+	struct ahash_request		fallback_req;
 };
 
 static int n2_hash_async_init(struct ahash_request *req)
 {
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
 
-	ctx->fallback_req.base.tfm = crypto_ahash_tfm(ctx->fallback);
-	ctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+	ahash_request_set_tfm(&rctx->fallback_req, ctx->fallback_tfm);
+	rctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
 
-	return crypto_ahash_init(&ctx->fallback_req);
+	return crypto_ahash_init(&rctx->fallback_req);
 }
 
 static int n2_hash_async_update(struct ahash_request *req)
 {
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
 
-	ctx->fallback_req.base.tfm = crypto_ahash_tfm(ctx->fallback);
-	ctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
-	ctx->fallback_req.nbytes = req->nbytes;
-	ctx->fallback_req.src = req->src;
+	ahash_request_set_tfm(&rctx->fallback_req, ctx->fallback_tfm);
+	rctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+	rctx->fallback_req.nbytes = req->nbytes;
+	rctx->fallback_req.src = req->src;
 
-	return crypto_ahash_update(&ctx->fallback_req);
+	return crypto_ahash_update(&rctx->fallback_req);
 }
 
 static int n2_hash_async_final(struct ahash_request *req)
 {
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
 
-	ctx->fallback_req.base.tfm = crypto_ahash_tfm(ctx->fallback);
-	ctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
-	ctx->fallback_req.result = req->result;
+	ahash_request_set_tfm(&rctx->fallback_req, ctx->fallback_tfm);
+	rctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+	rctx->fallback_req.result = req->result;
 
-	return crypto_ahash_final(&ctx->fallback_req);
+	return crypto_ahash_final(&rctx->fallback_req);
 }
 
 static int n2_hash_async_finup(struct ahash_request *req)
 {
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
 
-	ctx->fallback_req.base.tfm = crypto_ahash_tfm(ctx->fallback);
-	ctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
-	ctx->fallback_req.nbytes = req->nbytes;
-	ctx->fallback_req.src = req->src;
-	ctx->fallback_req.result = req->result;
+	ahash_request_set_tfm(&rctx->fallback_req, ctx->fallback_tfm);
+	rctx->fallback_req.base.flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+	rctx->fallback_req.nbytes = req->nbytes;
+	rctx->fallback_req.src = req->src;
+	rctx->fallback_req.result = req->result;
 
-	return crypto_ahash_finup(&ctx->fallback_req);
+	return crypto_ahash_finup(&rctx->fallback_req);
 }
 
 static int n2_hash_cra_init(struct crypto_tfm *tfm)
@@ -338,7 +338,10 @@ static int n2_hash_cra_init(struct crypto_tfm *tfm)
 		goto out;
 	}
 
-	ctx->fallback = fallback_tfm;
+	crypto_ahash_set_reqsize(ahash, (sizeof(struct n2_hash_req_ctx) +
+					 crypto_ahash_reqsize(fallback_tfm)));
+
+	ctx->fallback_tfm = fallback_tfm;
 	return 0;
 
 out:
@@ -350,7 +353,7 @@ static void n2_hash_cra_exit(struct crypto_tfm *tfm)
 	struct crypto_ahash *ahash = __crypto_ahash_cast(tfm);
 	struct n2_hash_ctx *ctx = crypto_ahash_ctx(ahash);
 
-	crypto_free_ahash(ctx->fallback);
+	crypto_free_ahash(ctx->fallback_tfm);
 }
 
 static unsigned long wait_for_tail(struct spu_queue *qp)
@@ -399,14 +402,16 @@ static int n2_hash_async_digest(struct ahash_request *req,
 	 * exceed 2^16.
 	 */
 	if (unlikely(req->nbytes > (1 << 16))) {
-		ctx->fallback_req.base.tfm = crypto_ahash_tfm(ctx->fallback);
-		ctx->fallback_req.base.flags =
+		struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
+
+		ahash_request_set_tfm(&rctx->fallback_req, ctx->fallback_tfm);
+		rctx->fallback_req.base.flags =
 			req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
-		ctx->fallback_req.nbytes = req->nbytes;
-		ctx->fallback_req.src = req->src;
-		ctx->fallback_req.result = req->result;
+		rctx->fallback_req.nbytes = req->nbytes;
+		rctx->fallback_req.src = req->src;
+		rctx->fallback_req.result = req->result;
 
-		return crypto_ahash_digest(&ctx->fallback_req);
+		return crypto_ahash_digest(&rctx->fallback_req);
 	}
 
 	n2_base_ctx_init(&ctx->base);
@@ -472,9 +477,8 @@ out:
 
 static int n2_md5_async_digest(struct ahash_request *req)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct md5_state *m = &ctx->u.md5;
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
+	struct md5_state *m = &rctx->u.md5;
 
 	if (unlikely(req->nbytes == 0)) {
 		static const char md5_zero[MD5_DIGEST_SIZE] = {
@@ -497,9 +501,8 @@ static int n2_md5_async_digest(struct ahash_request *req)
 
 static int n2_sha1_async_digest(struct ahash_request *req)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct sha1_state *s = &ctx->u.sha1;
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
+	struct sha1_state *s = &rctx->u.sha1;
 
 	if (unlikely(req->nbytes == 0)) {
 		static const char sha1_zero[SHA1_DIGEST_SIZE] = {
@@ -524,9 +527,8 @@ static int n2_sha1_async_digest(struct ahash_request *req)
 
 static int n2_sha256_async_digest(struct ahash_request *req)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct sha256_state *s = &ctx->u.sha256;
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
+	struct sha256_state *s = &rctx->u.sha256;
 
 	if (req->nbytes == 0) {
 		static const char sha256_zero[SHA256_DIGEST_SIZE] = {
@@ -555,9 +557,8 @@ static int n2_sha256_async_digest(struct ahash_request *req)
 
 static int n2_sha224_async_digest(struct ahash_request *req)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct n2_hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct sha256_state *s = &ctx->u.sha256;
+	struct n2_hash_req_ctx *rctx = ahash_request_ctx(req);
+	struct sha256_state *s = &rctx->u.sha256;
 
 	if (req->nbytes == 0) {
 		static const char sha224_zero[SHA224_DIGEST_SIZE] = {
@@ -1398,7 +1399,7 @@ static int find_devino_index(struct of_device *dev, struct spu_mdesc_info *ip,
 
 	intr = ip->ino_table[i].intr;
 
-	dev_intrs = of_get_property(dev->node, "interrupts", NULL);
+	dev_intrs = of_get_property(dev->dev.of_node, "interrupts", NULL);
 	if (!dev_intrs)
 		return -ENODEV;
 
@@ -1449,7 +1450,7 @@ static int queue_cache_init(void)
 {
 	if (!queue_cache[HV_NCS_QTYPE_MAU - 1])
 		queue_cache[HV_NCS_QTYPE_MAU - 1] =
-			kmem_cache_create("cwq_queue",
+			kmem_cache_create("mau_queue",
 					  (MAU_NUM_ENTRIES *
 					   MAU_ENTRY_SIZE),
 					  MAU_ENTRY_SIZE, 0, NULL);
@@ -1574,7 +1575,7 @@ static int spu_mdesc_walk_arcs(struct mdesc_handle *mdesc,
 		id = mdesc_get_property(mdesc, tgt, "id", NULL);
 		if (table[*id] != NULL) {
 			dev_err(&dev->dev, "%s: SPU cpu slot already set.\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 			return -EINVAL;
 		}
 		cpu_set(*id, p->sharing);
@@ -1595,7 +1596,7 @@ static int handle_exec_unit(struct spu_mdesc_info *ip, struct list_head *list,
 	p = kzalloc(sizeof(struct spu_queue), GFP_KERNEL);
 	if (!p) {
 		dev_err(&dev->dev, "%s: Could not allocate SPU queue.\n",
-			dev->node->full_name);
+			dev->dev.of_node->full_name);
 		return -ENOMEM;
 	}
 
@@ -1684,7 +1685,7 @@ static int __devinit grab_mdesc_irq_props(struct mdesc_handle *mdesc,
 	const unsigned int *reg;
 	u64 node;
 
-	reg = of_get_property(dev->node, "reg", NULL);
+	reg = of_get_property(dev->dev.of_node, "reg", NULL);
 	if (!reg)
 		return -ENODEV;
 
@@ -1836,7 +1837,7 @@ static int __devinit n2_crypto_probe(struct of_device *dev,
 
 	n2_spu_driver_version();
 
-	full_name = dev->node->full_name;
+	full_name = dev->dev.of_node->full_name;
 	pr_info("Found N2CP at %s\n", full_name);
 
 	np = alloc_n2cp();
@@ -1948,7 +1949,7 @@ static int __devinit n2_mau_probe(struct of_device *dev,
 
 	n2_spu_driver_version();
 
-	full_name = dev->node->full_name;
+	full_name = dev->dev.of_node->full_name;
 	pr_info("Found NCP at %s\n", full_name);
 
 	mp = alloc_ncp();
@@ -2034,8 +2035,11 @@ static struct of_device_id n2_crypto_match[] = {
 MODULE_DEVICE_TABLE(of, n2_crypto_match);
 
 static struct of_platform_driver n2_crypto_driver = {
-	.name		=	"n2cp",
-	.match_table	=	n2_crypto_match,
+	.driver = {
+		.name		=	"n2cp",
+		.owner		=	THIS_MODULE,
+		.of_match_table	=	n2_crypto_match,
+	},
 	.probe		=	n2_crypto_probe,
 	.remove		=	__devexit_p(n2_crypto_remove),
 };
@@ -2055,8 +2059,11 @@ static struct of_device_id n2_mau_match[] = {
 MODULE_DEVICE_TABLE(of, n2_mau_match);
 
 static struct of_platform_driver n2_mau_driver = {
-	.name		=	"ncp",
-	.match_table	=	n2_mau_match,
+	.driver = {
+		.name		=	"ncp",
+		.owner		=	THIS_MODULE,
+		.of_match_table	=	n2_mau_match,
+	},
 	.probe		=	n2_mau_probe,
 	.remove		=	__devexit_p(n2_mau_remove),
 };
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 637c105f53d..bd78acf3c36 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1183,10 +1183,14 @@ static size_t sg_copy_end_to_buffer(struct scatterlist *sgl, unsigned int nents,
 				/* Copy part of this segment */
 				ignore = skip - offset;
 				len = miter.length - ignore;
+				if (boffset + len > buflen)
+					len = buflen - boffset;
 				memcpy(buf + boffset, miter.addr + ignore, len);
 			} else {
-				/* Copy all of this segment */
+				/* Copy all of this segment (up to buflen) */
 				len = miter.length;
+				if (boffset + len > buflen)
+					len = buflen - boffset;
 				memcpy(buf + boffset, miter.addr, len);
 			}
 			boffset += len;
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 201e6e19c34..14a8c0f1698 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -630,7 +630,7 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
 static int __devinit mpc_dma_probe(struct of_device *op,
 					const struct of_device_id *match)
 {
-	struct device_node *dn = op->node;
+	struct device_node *dn = op->dev.of_node;
 	struct device *dev = &op->dev;
 	struct dma_device *dma;
 	struct mpc_dma *mdma;
@@ -771,12 +771,12 @@ static struct of_device_id mpc_dma_match[] = {
 };
 
 static struct of_platform_driver mpc_dma_driver = {
-	.match_table	= mpc_dma_match,
 	.probe		= mpc_dma_probe,
 	.remove		= __devexit_p(mpc_dma_remove),
-	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table	= mpc_dma_match,
 	},
 };
 
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index fa98abe4686..7c3747902a3 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4257,10 +4257,12 @@ static int ppc440spe_adma_setup_irqs(struct ppc440spe_adma_device *adev,
 				     struct ppc440spe_adma_chan *chan,
 				     int *initcode)
 {
+	struct of_device *ofdev;
 	struct device_node *np;
 	int ret;
 
-	np = container_of(adev->dev, struct of_device, dev)->node;
+	ofdev = container_of(adev->dev, struct of_device, dev);
+	np = ofdev->dev.of_node;
 	if (adev->id != PPC440SPE_XOR_ID) {
 		adev->err_irq = irq_of_parse_and_map(np, 1);
 		if (adev->err_irq == NO_IRQ) {
@@ -4394,7 +4396,7 @@ static void ppc440spe_adma_release_irqs(struct ppc440spe_adma_device *adev,
 static int __devinit ppc440spe_adma_probe(struct of_device *ofdev,
 					  const struct of_device_id *match)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct ppc440spe_adma_device *adev;
 	struct ppc440spe_adma_chan *chan;
@@ -4626,7 +4628,7 @@ out:
 static int __devexit ppc440spe_adma_remove(struct of_device *ofdev)
 {
 	struct ppc440spe_adma_device *adev = dev_get_drvdata(&ofdev->dev);
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct dma_chan *chan, *_chan;
 	struct ppc_dma_chan_ref *ref, *_ref;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 55c9c59b3f7..70bb350de99 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -39,14 +39,6 @@ config EDAC_DEBUG
 	  there're four debug levels (x=0,1,2,3 from low to high).
 	  Usually you should select 'N'.
 
-config EDAC_DEBUG_VERBOSE
-	bool "More verbose debugging"
-	depends on EDAC_DEBUG
-	help
-	  This option makes debugging information more verbose.
-	  Source file name and line number where debugging message
-	  printed will be added to debugging message.
-
  config EDAC_DECODE_MCE
 	tristate "Decode MCEs in human-readable form (only on AMD for now)"
 	depends on CPU_SUP_AMD && X86_MCE
@@ -69,6 +61,9 @@ config EDAC_MM_EDAC
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_MCE
+	bool
+
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
 	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
@@ -166,6 +161,16 @@ config EDAC_I5400
 	  Support for error detection and correction the Intel
 	  i5400 MCH chipset (Seaburg).
 
+config EDAC_I7CORE
+	tristate "Intel i7 Core (Nehalem) processors"
+	depends on EDAC_MM_EDAC && PCI && X86
+	select EDAC_MCE
+	help
+	  Support for error detection and correction the Intel
+	  i7 Core (Nehalem) Integrated Memory Controller that exists on
+	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+	  and Xeon 55xx processors.
+
 config EDAC_I82860
 	tristate "Intel 82860"
 	depends on EDAC_MM_EDAC && PCI && X86_32
@@ -196,7 +201,7 @@ config EDAC_I5100
 
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
-	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
+	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
 	help
 	  Support for error detection and correction on the Freescale
 	  MPC8349, MPC8560, MPC8540, MPC8548
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index bc5dc232a0f..ca6b1bb24cc 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,6 +8,7 @@
 
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
+obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
 edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
 edac_core-objs	+= edac_module.o edac_device_sysfs.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index cf17dbb8014..670239ab751 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -160,7 +160,7 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
 	return 0;
 }
 
-static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth)
+static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u32 min_scrubrate = 0x0;
@@ -178,10 +178,10 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth)
 
 	default:
 		amd64_printk(KERN_ERR, "Unsupported family!\n");
-		break;
+		return -EINVAL;
 	}
-	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth,
-			min_scrubrate);
+	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, bandwidth,
+					   min_scrubrate);
 }
 
 static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
@@ -796,6 +796,11 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
 
 static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
 
+static u16 extract_syndrome(struct err_regs *err)
+{
+	return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00);
+}
+
 static void amd64_cpu_display_info(struct amd64_pvt *pvt)
 {
 	if (boot_cpu_data.x86 == 0x11)
@@ -888,6 +893,9 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
 		return;
 	}
 
+	amd64_printk(KERN_INFO, "using %s syndromes.\n",
+		     ((pvt->syn_type == 8) ? "x8" : "x4"));
+
 	/* Only if NOT ganged does dclr1 have valid info */
 	if (!dct_ganging_enabled(pvt))
 		amd64_dump_dramcfg_low(pvt->dclr1, 1);
@@ -1101,20 +1109,17 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 }
 
 static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
-					struct err_regs *info,
-					u64 sys_addr)
+				    struct err_regs *err_info, u64 sys_addr)
 {
 	struct mem_ctl_info *src_mci;
-	unsigned short syndrome;
 	int channel, csrow;
 	u32 page, offset;
+	u16 syndrome;
 
-	/* Extract the syndrome parts and form a 16-bit syndrome */
-	syndrome  = HIGH_SYNDROME(info->nbsl) << 8;
-	syndrome |= LOW_SYNDROME(info->nbsh);
+	syndrome = extract_syndrome(err_info);
 
 	/* CHIPKILL enabled */
-	if (info->nbcfg & K8_NBCFG_CHIPKILL) {
+	if (err_info->nbcfg & K8_NBCFG_CHIPKILL) {
 		channel = get_channel_from_ecc_syndrome(mci, syndrome);
 		if (channel < 0) {
 			/*
@@ -1123,8 +1128,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 			 * as suspect.
 			 */
 			amd64_mc_printk(mci, KERN_WARNING,
-				       "unknown syndrome 0x%x - possible error "
-				       "reporting race\n", syndrome);
+					"unknown syndrome 0x%04x - possible "
+					"error reporting race\n", syndrome);
 			edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
 			return;
 		}
@@ -1430,7 +1435,7 @@ static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
 	u64 chan_off;
 
 	if (hi_range_sel) {
-		if (!(dct_sel_base_addr & 0xFFFFF800) &&
+		if (!(dct_sel_base_addr & 0xFFFF0000) &&
 		   hole_valid && (sys_addr >= 0x100000000ULL))
 			chan_off = hole_off << 16;
 		else
@@ -1654,13 +1659,13 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
  * (MCX_ADDR).
  */
 static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
-				     struct err_regs *info,
+				     struct err_regs *err_info,
 				     u64 sys_addr)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u32 page, offset;
-	unsigned short syndrome;
 	int nid, csrow, chan = 0;
+	u16 syndrome;
 
 	csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
 
@@ -1671,15 +1676,14 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 
 	error_address_to_page_and_offset(sys_addr, &page, &offset);
 
-	syndrome  = HIGH_SYNDROME(info->nbsl) << 8;
-	syndrome |= LOW_SYNDROME(info->nbsh);
+	syndrome = extract_syndrome(err_info);
 
 	/*
 	 * We need the syndromes for channel detection only when we're
 	 * ganged. Otherwise @chan should already contain the channel at
 	 * this point.
 	 */
-	if (dct_ganging_enabled(pvt) && pvt->nbcfg & K8_NBCFG_CHIPKILL)
+	if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL))
 		chan = get_channel_from_ecc_syndrome(mci, syndrome);
 
 	if (chan >= 0)
@@ -1878,7 +1882,7 @@ static u16 x8_vectors[] = {
 };
 
 static int decode_syndrome(u16 syndrome, u16 *vectors, int num_vecs,
-				 int v_dim)
+			   int v_dim)
 {
 	unsigned int i, err_sym;
 
@@ -1955,124 +1959,23 @@ static int map_err_sym_to_channel(int err_sym, int sym_size)
 static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
-	u32 value = 0;
-	int err_sym = 0;
-
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
+	int err_sym = -1;
 
-	/* F3x180[EccSymbolSize]=1, x8 symbols */
-	if (boot_cpu_data.x86 == 0x10 &&
-	    boot_cpu_data.x86_model > 7 &&
-	    value & BIT(25)) {
+	if (pvt->syn_type == 8)
 		err_sym = decode_syndrome(syndrome, x8_vectors,
-					  ARRAY_SIZE(x8_vectors), 8);
-		return map_err_sym_to_channel(err_sym, 8);
-	} else {
+					  ARRAY_SIZE(x8_vectors),
+					  pvt->syn_type);
+	else if (pvt->syn_type == 4)
 		err_sym = decode_syndrome(syndrome, x4_vectors,
-					  ARRAY_SIZE(x4_vectors), 4);
-		return map_err_sym_to_channel(err_sym, 4);
+					  ARRAY_SIZE(x4_vectors),
+					  pvt->syn_type);
+	else {
+		amd64_printk(KERN_WARNING, "%s: Illegal syndrome type: %u\n",
+					   __func__, pvt->syn_type);
+		return err_sym;
 	}
-}
 
-/*
- * Check for valid error in the NB Status High register. If so, proceed to read
- * NB Status Low, NB Address Low and NB Address High registers and store data
- * into error structure.
- *
- * Returns:
- *	- 1: if hardware regs contains valid error info
- *	- 0: if no valid error is indicated
- */
-static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
-				     struct err_regs *regs)
-{
-	struct amd64_pvt *pvt;
-	struct pci_dev *misc_f3_ctl;
-
-	pvt = mci->pvt_info;
-	misc_f3_ctl = pvt->misc_f3_ctl;
-
-	if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSH, &regs->nbsh))
-		return 0;
-
-	if (!(regs->nbsh & K8_NBSH_VALID_BIT))
-		return 0;
-
-	/* valid error, read remaining error information registers */
-	if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSL, &regs->nbsl) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAL, &regs->nbeal) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAH, &regs->nbeah) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBCFG, &regs->nbcfg))
-		return 0;
-
-	return 1;
-}
-
-/*
- * This function is called to retrieve the error data from hardware and store it
- * in the info structure.
- *
- * Returns:
- *	- 1: if a valid error is found
- *	- 0: if no error is found
- */
-static int amd64_get_error_info(struct mem_ctl_info *mci,
-				struct err_regs *info)
-{
-	struct amd64_pvt *pvt;
-	struct err_regs regs;
-
-	pvt = mci->pvt_info;
-
-	if (!amd64_get_error_info_regs(mci, info))
-		return 0;
-
-	/*
-	 * Here's the problem with the K8's EDAC reporting: There are four
-	 * registers which report pieces of error information. They are shared
-	 * between CEs and UEs. Furthermore, contrary to what is stated in the
-	 * BKDG, the overflow bit is never used! Every error always updates the
-	 * reporting registers.
-	 *
-	 * Can you see the race condition? All four error reporting registers
-	 * must be read before a new error updates them! There is no way to read
-	 * all four registers atomically. The best than can be done is to detect
-	 * that a race has occured and then report the error without any kind of
-	 * precision.
-	 *
-	 * What is still positive is that errors are still reported and thus
-	 * problems can still be detected - just not localized because the
-	 * syndrome and address are spread out across registers.
-	 *
-	 * Grrrrr!!!!!  Here's hoping that AMD fixes this in some future K8 rev.
-	 * UEs and CEs should have separate register sets with proper overflow
-	 * bits that are used! At very least the problem can be fixed by
-	 * honoring the ErrValid bit in 'nbsh' and not updating registers - just
-	 * set the overflow bit - unless the current error is CE and the new
-	 * error is UE which would be the only situation for overwriting the
-	 * current values.
-	 */
-
-	regs = *info;
-
-	/* Use info from the second read - most current */
-	if (unlikely(!amd64_get_error_info_regs(mci, info)))
-		return 0;
-
-	/* clear the error bits in hardware */
-	pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT);
-
-	/* Check for the possible race condition */
-	if ((regs.nbsh != info->nbsh) ||
-	     (regs.nbsl != info->nbsl) ||
-	     (regs.nbeah != info->nbeah) ||
-	     (regs.nbeal != info->nbeal)) {
-		amd64_mc_printk(mci, KERN_WARNING,
-				"hardware STATUS read access race condition "
-				"detected!\n");
-		return 0;
-	}
-	return 1;
+	return map_err_sym_to_channel(err_sym, pvt->syn_type);
 }
 
 /*
@@ -2177,7 +2080,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
 	 * catastrophic.
 	 */
 	if (info->nbsh & K8_NBSH_OVERFLOW)
-		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow");
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR " Error Overflow");
 }
 
 void amd64_decode_bus_error(int node_id, struct err_regs *regs)
@@ -2199,20 +2102,6 @@ void amd64_decode_bus_error(int node_id, struct err_regs *regs)
 }
 
 /*
- * The main polling 'check' function, called FROM the edac core to perform the
- * error checking and if an error is encountered, error processing.
- */
-static void amd64_check(struct mem_ctl_info *mci)
-{
-	struct err_regs regs;
-
-	if (amd64_get_error_info(mci, &regs)) {
-		struct amd64_pvt *pvt = mci->pvt_info;
-		amd_decode_nb_mce(pvt->mc_node_id, &regs, 1);
-	}
-}
-
-/*
  * Input:
  *	1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
  *	2) AMD Family index value
@@ -2284,6 +2173,7 @@ static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
 static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 {
 	u64 msr_val;
+	u32 tmp;
 	int dram;
 
 	/*
@@ -2349,10 +2239,22 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
 	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
 
-	if (!dct_ganging_enabled(pvt) && boot_cpu_data.x86 >= 0x10) {
-		amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
-		amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
+	if (boot_cpu_data.x86 >= 0x10) {
+		if (!dct_ganging_enabled(pvt)) {
+			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
+			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
+		}
+		amd64_read_pci_cfg(pvt->misc_f3_ctl, EXT_NB_MCA_CFG, &tmp);
 	}
+
+	if (boot_cpu_data.x86 == 0x10 &&
+	    boot_cpu_data.x86_model > 7 &&
+	    /* F3x180[EccSymbolSize]=1 => x8 symbols */
+	    tmp & BIT(25))
+		pvt->syn_type = 8;
+	else
+		pvt->syn_type = 4;
+
 	amd64_dump_misc_regs(pvt);
 }
 
@@ -2739,9 +2641,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
 	mci->dev_name		= pci_name(pvt->dram_f2_ctl);
 	mci->ctl_page_to_phys	= NULL;
 
-	/* IMPORTANT: Set the polling 'check' function in this module */
-	mci->edac_check		= amd64_check;
-
 	/* memory scrubber interface */
 	mci->set_sdram_scrub_rate = amd64_set_scrub_rate;
 	mci->get_sdram_scrub_rate = amd64_get_scrub_rate;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 0d4bf563824..613b9381e71 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -244,44 +244,17 @@
 
 
 #define F10_DCTL_SEL_LOW		0x110
-
-#define dct_sel_baseaddr(pvt)    \
-	((pvt->dram_ctl_select_low) & 0xFFFFF800)
-
-#define dct_sel_interleave_addr(pvt)    \
-	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
-
-enum {
-	F10_DCTL_SEL_LOW_DctSelHiRngEn	= BIT(0),
-	F10_DCTL_SEL_LOW_DctSelIntLvEn	= BIT(2),
-	F10_DCTL_SEL_LOW_DctGangEn	= BIT(4),
-	F10_DCTL_SEL_LOW_DctDatIntLv	= BIT(5),
-	F10_DCTL_SEL_LOW_DramEnable	= BIT(8),
-	F10_DCTL_SEL_LOW_MemCleared	= BIT(10),
-};
-
-#define    dct_high_range_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
-
-#define dct_interleave_enabled(pvt)	   \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
-
-#define dct_ganging_enabled(pvt)        \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
-
-#define dct_data_intlv_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
-
-#define dct_dram_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
-
-#define dct_memory_cleared(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
-
+#define dct_sel_baseaddr(pvt)		((pvt->dram_ctl_select_low) & 0xFFFFF800)
+#define dct_sel_interleave_addr(pvt)	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
+#define dct_high_range_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(0))
+#define dct_interleave_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(2))
+#define dct_ganging_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(4))
+#define dct_data_intlv_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(5))
+#define dct_dram_enabled(pvt)		(pvt->dram_ctl_select_low & BIT(8))
+#define dct_memory_cleared(pvt)		(pvt->dram_ctl_select_low & BIT(10))
 
 #define F10_DCTL_SEL_HIGH		0x114
 
-
 /*
  * Function 3 - Misc Control
  */
@@ -382,6 +355,8 @@ enum {
 #define K8_NBCAP_SECDED			BIT(3)
 #define K8_NBCAP_DCT_DUAL		BIT(0)
 
+#define EXT_NB_MCA_CFG			0x180
+
 /* MSRs */
 #define K8_MSR_MCGCTL_NBE		BIT(4)
 
@@ -471,6 +446,9 @@ struct amd64_pvt {
 	u32 dram_ctl_select_high;	/* DRAM Controller Select High Reg */
 	u32 online_spare;               /* On-Line spare Reg */
 
+	/* x4 or x8 syndromes in use */
+	u8 syn_type;
+
 	/* temp storage for when input is received from sysfs */
 	struct err_regs ctl_error_info;
 
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index ae3f80c5419..073f5a06d23 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -958,7 +958,7 @@ static void e752x_check(struct mem_ctl_info *mci)
 }
 
 /* Program byte/sec bandwidth scrub rate to hardware */
-static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
 {
 	const struct scrubrate *scrubrates;
 	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
@@ -975,7 +975,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
 	 * desired rate and program the cooresponding register value.
 	 */
 	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
-		if (scrubrates[i].bandwidth >= *new_bw)
+		if (scrubrates[i].bandwidth >= new_bw)
 			break;
 
 	if (scrubrates[i].bandwidth == SDRATE_EOT)
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 001b2e797fb..ce7146677e9 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -49,21 +49,15 @@
 #define edac_printk(level, prefix, fmt, arg...) \
 	printk(level "EDAC " prefix ": " fmt, ##arg)
 
-#define edac_printk_verbose(level, prefix, fmt, arg...) \
-	printk(level "EDAC " prefix ": " "in %s, line at %d: " fmt,	\
-	       __FILE__, __LINE__, ##arg)
-
 #define edac_mc_printk(mci, level, fmt, arg...) \
 	printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
 
 #define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \
 	printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg)
 
-/* edac_device printk */
 #define edac_device_printk(ctl, level, fmt, arg...) \
 	printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg)
 
-/* edac_pci printk */
 #define edac_pci_printk(ctl, level, fmt, arg...) \
 	printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg)
 
@@ -76,21 +70,12 @@
 extern int edac_debug_level;
 extern const char *edac_mem_types[];
 
-#ifndef CONFIG_EDAC_DEBUG_VERBOSE
 #define edac_debug_printk(level, fmt, arg...)                           \
 	do {                                                            \
 		if (level <= edac_debug_level)                          \
 			edac_printk(KERN_DEBUG, EDAC_DEBUG,		\
 				    "%s: " fmt, __func__, ##arg);	\
 	} while (0)
-#else  /* CONFIG_EDAC_DEBUG_VERBOSE */
-#define edac_debug_printk(level, fmt, arg...)                            \
-	do {                                                             \
-		if (level <= edac_debug_level)                           \
-			edac_printk_verbose(KERN_DEBUG, EDAC_DEBUG, fmt, \
-					    ##arg);			\
-	} while (0)
-#endif
 
 #define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ )
 #define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ )
@@ -341,12 +326,30 @@ struct csrow_info {
 	struct channel_info *channels;
 };
 
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	struct mcidev_sysfs_attribute *mcidev_attr;	/* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
 /* mcidev_sysfs_attribute structure
  *	used for driver sysfs attributes and in mem_ctl_info
  * 	sysfs top level entries
  */
 struct mcidev_sysfs_attribute {
-        struct attribute attr;
+	/* It should use either attr or grp */
+	struct attribute attr;
+	struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
         ssize_t (*show)(struct mem_ctl_info *,char *);
         ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
 };
@@ -375,7 +378,7 @@ struct mem_ctl_info {
 	   internal representation and configures whatever else needs
 	   to be configured.
 	 */
-	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw);
+	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
 
 	/* Get the current sdram memory scrub rate from the internal
 	   representation and converts it to the closest matching
@@ -424,6 +427,9 @@ struct mem_ctl_info {
 	/* edac sysfs device control */
 	struct kobject edac_mci_kobj;
 
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
+
 	/* Additional top controller level attributes, but specified
 	 * by the low level driver.
 	 *
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 418b65f1a1d..8aad94d10c0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -124,19 +124,6 @@ static const char *edac_caps[] = {
 	[EDAC_S16ECD16ED] = "S16ECD16ED"
 };
 
-
-
-static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
-{
-	int *value = (int *)ptr;
-
-	if (isdigit(*buffer))
-		*value = simple_strtoul(buffer, NULL, 0);
-
-	return count;
-}
-
-
 /* EDAC sysfs CSROW data structures and methods
  */
 
@@ -450,53 +437,54 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 
 /* memory scrubbing */
 static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
-					const char *data, size_t count)
+					  const char *data, size_t count)
 {
-	u32 bandwidth = -1;
+	unsigned long bandwidth = 0;
+	int err;
 
-	if (mci->set_sdram_scrub_rate) {
+	if (!mci->set_sdram_scrub_rate) {
+		edac_printk(KERN_WARNING, EDAC_MC,
+			    "Memory scrub rate setting not implemented!\n");
+		return -EINVAL;
+	}
 
-		memctrl_int_store(&bandwidth, data, count);
+	if (strict_strtoul(data, 10, &bandwidth) < 0)
+		return -EINVAL;
 
-		if (!(*mci->set_sdram_scrub_rate) (mci, &bandwidth)) {
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate set successfully, applied: %d\n",
-				bandwidth);
-		} else {
-			/* FIXME: error codes maybe? */
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate set FAILED, could not apply: %d\n",
-				bandwidth);
-		}
-	} else {
-		/* FIXME: produce "not implemented" ERROR for user-side. */
-		edac_printk(KERN_WARNING, EDAC_MC,
-			"Memory scrubbing 'set'control is not implemented!\n");
+	err = mci->set_sdram_scrub_rate(mci, (u32)bandwidth);
+	if (err) {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Failed setting scrub rate to %lu\n", bandwidth);
+		return -EINVAL;
+	}
+	else {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Scrub rate set to: %lu\n", bandwidth);
+		return count;
 	}
-	return count;
 }
 
 static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
 {
-	u32 bandwidth = -1;
-
-	if (mci->get_sdram_scrub_rate) {
-		if (!(*mci->get_sdram_scrub_rate) (mci, &bandwidth)) {
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate successfully, fetched: %d\n",
-				bandwidth);
-		} else {
-			/* FIXME: error codes maybe? */
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate fetch FAILED, got: %d\n",
-				bandwidth);
-		}
-	} else {
-		/* FIXME: produce "not implemented" ERROR for user-side.  */
+	u32 bandwidth = 0;
+	int err;
+
+	if (!mci->get_sdram_scrub_rate) {
 		edac_printk(KERN_WARNING, EDAC_MC,
-			"Memory scrubbing 'get' control is not implemented\n");
+			    "Memory scrub rate reading not implemented\n");
+		return -EINVAL;
+	}
+
+	err = mci->get_sdram_scrub_rate(mci, &bandwidth);
+	if (err) {
+		edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
+		return err;
+	}
+	else {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Read scrub rate: %d\n", bandwidth);
+		return sprintf(data, "%d\n", bandwidth);
 	}
-	return sprintf(data, "%d\n", bandwidth);
 }
 
 /* default attribute files for the MCI object */
@@ -557,6 +545,8 @@ static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
 
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
 	if (mcidev_attr->show)
 		return mcidev_attr->show(mem_ctl_info, buffer);
 
@@ -569,6 +559,8 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr,
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
 
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
 	if (mcidev_attr->store)
 		return mcidev_attr->store(mem_ctl_info, buffer, count);
 
@@ -726,28 +718,118 @@ void edac_mc_unregister_sysfs_main_kobj(struct mem_ctl_info *mci)
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
+#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci)
+
+/* MCI show/store functions for top most object */
+static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr,
+			char *buffer)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->show)
+		return mcidev_attr->show(mem_ctl_info, buffer);
+
+	return -EIO;
+}
+
+static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr,
+			const char *buffer, size_t count)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->store)
+		return mcidev_attr->store(mem_ctl_info, buffer, count);
+
+	return -EIO;
+}
+
+/* No memory to release for this kobj */
+static void edac_inst_grp_release(struct kobject *kobj)
+{
+	struct mcidev_sysfs_group_kobj *grp;
+	struct mem_ctl_info *mci;
+
+	debugf1("%s()\n", __func__);
+
+	grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj);
+	mci = grp->mci;
+
+	kobject_put(&mci->edac_mci_kobj);
+}
+
+/* Intermediate show/store table */
+static struct sysfs_ops inst_grp_ops = {
+	.show = inst_grp_show,
+	.store = inst_grp_store
+};
+
+/* the kobj_type instance for a instance group */
+static struct kobj_type ktype_inst_grp = {
+	.release = edac_inst_grp_release,
+	.sysfs_ops = &inst_grp_ops,
+};
+
+
 /*
  * edac_create_mci_instance_attributes
- *	create MC driver specific attributes at the topmost level
- *	directory of this mci instance.
+ *	create MC driver specific attributes bellow an specified kobj
+ * This routine calls itself recursively, in order to create an entire
+ * object tree.
  */
-static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
+static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj)
 {
 	int err;
-	struct mcidev_sysfs_attribute *sysfs_attrib;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
-	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
+	debugf1("%s()\n", __func__);
+
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			struct mcidev_sysfs_group_kobj *grp_kobj;
+
+			grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL);
+			if (!grp_kobj)
+				return -ENOMEM;
+
+			list_add_tail(&grp_kobj->list, &mci->grp_kobj_list);
+
+			grp_kobj->grp = sysfs_attrib->grp;
+			grp_kobj->mci = mci;
+
+			debugf0("%s() grp %s, mci %p\n", __func__,
+				sysfs_attrib->grp->name, mci);
+
+			err = kobject_init_and_add(&grp_kobj->kobj,
+						&ktype_inst_grp,
+						&mci->edac_mci_kobj,
+						sysfs_attrib->grp->name);
+			if (err)
+				return err;
+
+			err = edac_create_mci_instance_attributes(mci,
+					grp_kobj->grp->mcidev_attr,
+					&grp_kobj->kobj);
+
+			if (err)
+				return err;
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+
+			err = sysfs_create_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
 
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		err = sysfs_create_file(&mci->edac_mci_kobj,
-					(struct attribute*) sysfs_attrib);
 		if (err) {
 			return err;
 		}
-
 		sysfs_attrib++;
 	}
 
@@ -759,21 +841,44 @@ static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
  *	remove MC driver specific attributes at the topmost level
  *	directory of this mci instance.
  */
-static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci)
+static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj, int count)
 {
-	struct mcidev_sysfs_attribute *sysfs_attrib;
+	struct mcidev_sysfs_group_kobj *grp_kobj, *tmp;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
-	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
+	debugf1("%s()\n", __func__);
 
-	/* loop if there are attributes and until we hit a NULL entry */
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		sysfs_remove_file(&mci->edac_mci_kobj,
-					(struct attribute *) sysfs_attrib);
+	/*
+	 * loop if there are attributes and until we hit a NULL entry
+	 * Remove first all the atributes
+	 */
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			list_for_each_entry(grp_kobj, &mci->grp_kobj_list,
+					    list)
+				if (grp_kobj->grp == sysfs_attrib->grp)
+					edac_remove_mci_instance_attributes(mci,
+						    grp_kobj->grp->mcidev_attr,
+						    &grp_kobj->kobj, count + 1);
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+			sysfs_remove_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
 		sysfs_attrib++;
 	}
+
+	/*
+	 * Now that all attributes got removed, it is save to remove all groups
+	 */
+	if (!count)
+		list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list,
+					 list) {
+			debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name);
+			kobject_put(&grp_kobj->kobj);
+		}
 }
 
 
@@ -794,6 +899,8 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 
 	debugf0("%s() idx=%d\n", __func__, mci->mc_idx);
 
+	INIT_LIST_HEAD(&mci->grp_kobj_list);
+
 	/* create a symlink for the device */
 	err = sysfs_create_link(kobj_mci, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
@@ -806,7 +913,9 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 	 * then create them now for the driver.
 	 */
 	if (mci->mc_driver_sysfs_attributes) {
-		err = edac_create_mci_instance_attributes(mci);
+		err = edac_create_mci_instance_attributes(mci,
+					mci->mc_driver_sysfs_attributes,
+					&mci->edac_mci_kobj);
 		if (err) {
 			debugf1("%s() failure to create mci attributes\n",
 				__func__);
@@ -841,7 +950,8 @@ fail1:
 	}
 
 	/* remove the mci instance's attributes, if any */
-	edac_remove_mci_instance_attributes(mci);
+	edac_remove_mci_instance_attributes(mci,
+		mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0);
 
 	/* remove the symlink */
 	sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK);
@@ -875,8 +985,9 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 	debugf0("%s()  remove_mci_instance\n", __func__);
 
 	/* remove this mci instance's attribtes */
-	edac_remove_mci_instance_attributes(mci);
-
+	edac_remove_mci_instance_attributes(mci,
+					    mci->mc_driver_sysfs_attributes,
+					    &mci->edac_mci_kobj, 0);
 	debugf0("%s()  unregister this mci kobj\n", __func__);
 
 	/* unregister this instance's kobject */
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
new file mode 100644
index 00000000000..9ccdc5b140e
--- /dev/null
+++ b/drivers/edac/edac_mce.c
@@ -0,0 +1,61 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#include <linux/module.h>
+#include <linux/edac_mce.h>
+#include <asm/mce.h>
+
+int edac_mce_enabled;
+EXPORT_SYMBOL_GPL(edac_mce_enabled);
+
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(edac_mce_list);
+static DEFINE_MUTEX(edac_mce_lock);
+
+int edac_mce_register(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_add_tail(&edac_mce->list, &edac_mce_list);
+	mutex_unlock(&edac_mce_lock);
+	return 0;
+}
+EXPORT_SYMBOL(edac_mce_register);
+
+void edac_mce_unregister(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_del(&edac_mce->list);
+	mutex_unlock(&edac_mce_lock);
+}
+EXPORT_SYMBOL(edac_mce_unregister);
+
+int edac_mce_parse(struct mce *mce)
+{
+	struct edac_mce *edac_mce;
+
+	list_for_each_entry(edac_mce, &edac_mce_list, list) {
+		if (edac_mce->check_error(edac_mce->priv, mce))
+			return 1;
+	}
+
+	/* Nobody queued the error */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(edac_mce_parse);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 97e64bcdbc0..bae9351e947 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -133,7 +133,7 @@ static void amd_decode_dc_mce(u64 mc0_status)
 	u32 ec  = mc0_status & 0xffff;
 	u32 xec = (mc0_status >> 16) & 0xf;
 
-	pr_emerg(" Data Cache Error");
+	pr_emerg("Data Cache Error");
 
 	if (xec == 1 && TLB_ERROR(ec))
 		pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
@@ -176,7 +176,7 @@ static void amd_decode_ic_mce(u64 mc1_status)
 	u32 ec  = mc1_status & 0xffff;
 	u32 xec = (mc1_status >> 16) & 0xf;
 
-	pr_emerg(" Instruction Cache Error");
+	pr_emerg("Instruction Cache Error");
 
 	if (xec == 1 && TLB_ERROR(ec))
 		pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
@@ -233,7 +233,7 @@ static void amd_decode_bu_mce(u64 mc2_status)
 	u32 ec = mc2_status & 0xffff;
 	u32 xec = (mc2_status >> 16) & 0xf;
 
-	pr_emerg(" Bus Unit Error");
+	pr_emerg("Bus Unit Error");
 
 	if (xec == 0x1)
 		pr_cont(" in the write data buffers.\n");
@@ -275,7 +275,7 @@ static void amd_decode_ls_mce(u64 mc3_status)
 	u32 ec  = mc3_status & 0xffff;
 	u32 xec = (mc3_status >> 16) & 0xf;
 
-	pr_emerg(" Load Store Error");
+	pr_emerg("Load Store Error");
 
 	if (xec == 0x0) {
 		u8 rrrr = (ec >> 4) & 0xf;
@@ -304,7 +304,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
 	if (TLB_ERROR(ec) && !report_gart_errors)
 		return;
 
-	pr_emerg(" Northbridge Error, node %d", node_id);
+	pr_emerg("Northbridge Error, node %d", node_id);
 
 	/*
 	 * F10h, revD can disable ErrCpu[3:0] so check that first and also the
@@ -342,13 +342,13 @@ static void amd_decode_fr_mce(u64 mc5_status)
 static inline void amd_decode_err_code(unsigned int ec)
 {
 	if (TLB_ERROR(ec)) {
-		pr_emerg(" Transaction: %s, Cache Level %s\n",
+		pr_emerg("Transaction: %s, Cache Level %s\n",
 			 TT_MSG(ec), LL_MSG(ec));
 	} else if (MEM_ERROR(ec)) {
-		pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s",
+		pr_emerg("Transaction: %s, Type: %s, Cache Level: %s",
 			 RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec));
 	} else if (BUS_ERROR(ec)) {
-		pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, "
+		pr_emerg("Transaction type: %s(%s), %s, Cache Level: %s, "
 			 "Participating Processor: %s\n",
 			  RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec),
 			  PP_MSG(ec));
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index ee9753cf362..f459a6c0886 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -589,14 +589,13 @@ static void i5100_refresh_scrubbing(struct work_struct *work)
 /*
  * The bandwidth is based on experimentation, feel free to refine it.
  */
-static int i5100_set_scrub_rate(struct mem_ctl_info *mci,
-				       u32 *bandwidth)
+static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 {
 	struct i5100_priv *priv = mci->pvt_info;
 	u32 dw;
 
 	pci_read_config_dword(priv->mc, I5100_MC, &dw);
-	if (*bandwidth) {
+	if (bandwidth) {
 		priv->scrub_enable = 1;
 		dw |= I5100_MC_SCRBEN_MASK;
 		schedule_delayed_work(&(priv->i5100_scrubbing),
@@ -610,7 +609,7 @@ static int i5100_set_scrub_rate(struct mem_ctl_info *mci,
 
 	pci_read_config_dword(priv->mc, I5100_MC, &dw);
 
-	*bandwidth = 5900000 * i5100_mc_scrben(dw);
+	bandwidth = 5900000 * i5100_mc_scrben(dw);
 
 	return 0;
 }
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
new file mode 100644
index 00000000000..e0187d16dd7
--- /dev/null
+++ b/drivers/edac/i7core_edac.c
@@ -0,0 +1,2105 @@
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ *	http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "edac_core.h"
+
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES	2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION    " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR      "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...)			\
+	edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+	/* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL	0x90
+
+	/* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL	0x48
+#define MC_STATUS	0x4c
+#define MC_MAX_DOD	0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1	0x60
+  #define DIMM2_COR_ERR(r)			((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0	0x64
+  #define DIMM1_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+  #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0	0x80
+#define MC_COR_ECC_CNT_1	0x84
+#define MC_COR_ECC_CNT_2	0x88
+#define MC_COR_ECC_CNT_3	0x8c
+#define MC_COR_ECC_CNT_4	0x90
+#define MC_COR_ECC_CNT_5	0x94
+
+#define DIMM_TOP_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r)			((r) & 0x7fff)
+
+
+	/* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+  #define THREE_DIMMS_PRESENT		(1 << 24)
+  #define SINGLE_QUAD_RANK_PRESENT	(1 << 23)
+  #define QUAD_RANK_PRESENT		(1 << 22)
+  #define REGISTERED_DIMM		(1 << 15)
+
+#define MC_CHANNEL_MAPPER	0x60
+  #define RDLCH(r, ch)		((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+  #define WRLCH(r, ch)		((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+  #define RANK_PRESENT_MASK		0xffff
+
+#define MC_CHANNEL_ADDR_MATCH	0xf0
+#define MC_CHANNEL_ERROR_MASK	0xf8
+#define MC_CHANNEL_ERROR_INJECT	0xfc
+  #define INJECT_ADDR_PARITY	0x10
+  #define INJECT_ECC		0x08
+  #define MASK_CACHELINE	0x06
+  #define MASK_FULL_CACHELINE	0x06
+  #define MASK_MSB32_CACHELINE	0x04
+  #define MASK_LSB32_CACHELINE	0x02
+  #define NO_MASK_CACHELINE	0x00
+  #define REPEAT_EN		0x01
+
+	/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0		0x48
+#define MC_DOD_CH_DIMM1		0x4c
+#define MC_DOD_CH_DIMM2		0x50
+  #define RANKOFFSET_MASK	((1 << 12) | (1 << 11) | (1 << 10))
+  #define RANKOFFSET(x)		((x & RANKOFFSET_MASK) >> 10)
+  #define DIMM_PRESENT_MASK	(1 << 9)
+  #define DIMM_PRESENT(x)	(((x) & DIMM_PRESENT_MASK) >> 9)
+  #define MC_DOD_NUMBANK_MASK		((1 << 8) | (1 << 7))
+  #define MC_DOD_NUMBANK(x)		(((x) & MC_DOD_NUMBANK_MASK) >> 7)
+  #define MC_DOD_NUMRANK_MASK		((1 << 6) | (1 << 5))
+  #define MC_DOD_NUMRANK(x)		(((x) & MC_DOD_NUMRANK_MASK) >> 5)
+  #define MC_DOD_NUMROW_MASK		((1 << 4) | (1 << 3) | (1 << 2))
+  #define MC_DOD_NUMROW(x)		(((x) & MC_DOD_NUMROW_MASK) >> 2)
+  #define MC_DOD_NUMCOL_MASK		3
+  #define MC_DOD_NUMCOL(x)		((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT		0x7c
+
+#define MC_SAG_CH_0	0x80
+#define MC_SAG_CH_1	0x84
+#define MC_SAG_CH_2	0x88
+#define MC_SAG_CH_3	0x8c
+#define MC_SAG_CH_4	0x90
+#define MC_SAG_CH_5	0x94
+#define MC_SAG_CH_6	0x98
+#define MC_SAG_CH_7	0x9c
+
+#define MC_RIR_LIMIT_CH_0	0x40
+#define MC_RIR_LIMIT_CH_1	0x44
+#define MC_RIR_LIMIT_CH_2	0x48
+#define MC_RIR_LIMIT_CH_3	0x4C
+#define MC_RIR_LIMIT_CH_4	0x50
+#define MC_RIR_LIMIT_CH_5	0x54
+#define MC_RIR_LIMIT_CH_6	0x58
+#define MC_RIR_LIMIT_CH_7	0x5C
+#define MC_RIR_LIMIT_MASK	((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH		0x80
+  #define MC_RIR_WAY_OFFSET_MASK	(((1 << 14) - 1) & ~0x7)
+  #define MC_RIR_WAY_RANK_MASK		0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3		/* Max DIMMS per channel */
+#define MAX_MCR_FUNC  4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+	u32	mc_control;
+	u32	mc_status;
+	u32	max_dod;
+	u32	ch_map;
+};
+
+
+struct i7core_inject {
+	int	enable;
+
+	u32	section;
+	u32	type;
+	u32	eccmask;
+
+	/* Error address mask */
+	int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+	u32		ranks;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev;
+	int			func;
+	int 			dev_id;
+	int			optional;
+};
+
+struct pci_id_table {
+	struct pci_id_descr	*descr;
+	int			n_devs;
+};
+
+struct i7core_dev {
+	struct list_head	list;
+	u8			socket;
+	struct pci_dev		**pdev;
+	int			n_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct i7core_pvt {
+	struct pci_dev	*pci_noncore;
+	struct pci_dev	*pci_mcr[MAX_MCR_FUNC + 1];
+	struct pci_dev	*pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+	struct i7core_dev *i7core_dev;
+
+	struct i7core_info	info;
+	struct i7core_inject	inject;
+	struct i7core_channel	channel[NUM_CHANS];
+
+	int		channels; /* Number of active channels */
+
+	int		ce_count_available;
+	int 		csrow_map[NUM_CHANS][MAX_DIMMS];
+
+			/* ECC corrected errors counts per udimm */
+	unsigned long	udimm_ce_count[MAX_DIMMS];
+	int		udimm_last_ce_count[MAX_DIMMS];
+			/* ECC corrected errors counts per rdimm */
+	unsigned long	rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+	int		rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+	unsigned int	is_registered;
+
+	/* mcelog glue */
+	struct edac_mce		edac_mce;
+
+	/* Fifo double buffers */
+	struct mce		mce_entry[MCE_LOG_LEN];
+	struct mce		mce_outentry[MCE_LOG_LEN];
+
+	/* Fifo in/out counters */
+	unsigned		mce_in, mce_out;
+
+	/* Count indicator to show errors not got */
+	unsigned		mce_overrun;
+};
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
+#define PCI_DESCR(device, function, device_id)	\
+	.dev = (device),			\
+	.func = (function),			\
+	.dev_id = (device_id)
+
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
+
+		/* Generic Non-core registers */
+	/*
+	 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+	 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+	 * the probing code needs to test for the other address in case of
+	 * failure of this one
+	 */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+	{ PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR)         },
+	{ PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD)      },
+	{ PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST)     },
+
+	{ PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+	{ PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+	{ PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+	{ PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC)   },
+
+	{ PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+	{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+	{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+	{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
+
+	/*
+	 * This is the PCI device has an alternate address on some
+	 * processors like Core i7 860
+	 */
+	{ PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
+
+		/* Generic Non-core registers */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+};
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+	{0,}			/* 0 terminated list. */
+};
+
+static struct edac_pci_ctl_info *i7core_pci;
+
+/****************************************************************************
+			Anciliary status routines
+ ****************************************************************************/
+
+	/* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch)	((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt)		((pvt)->info.mc_control & (1 << 1))
+
+	/* MC_STATUS bits */
+#define ECC_ENABLED(pvt)	((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch)	((pvt)->info.mc_status & (1 << ch))
+
+	/* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+	return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+	static int ranks[4] = { 1, 2, 4, -EINVAL };
+
+	return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+	static int banks[4] = { 4, 8, 16, -EINVAL };
+
+	return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+	static int rows[8] = {
+		1 << 12, 1 << 13, 1 << 14, 1 << 15,
+		1 << 16, -EINVAL, -EINVAL, -EINVAL,
+	};
+
+	return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+	static int cols[8] = {
+		1 << 10, 1 << 11, 1 << 12, -EINVAL,
+	};
+	return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+	struct i7core_dev *i7core_dev;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		if (i7core_dev->socket == socket)
+			return i7core_dev;
+	}
+
+	return NULL;
+}
+
+/****************************************************************************
+			Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+					  unsigned func)
+{
+	struct i7core_dev *i7core_dev = get_i7core_dev(socket);
+	int i;
+
+	if (!i7core_dev)
+		return NULL;
+
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		if (!i7core_dev->pdev[i])
+			continue;
+
+		if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+		    PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+			return i7core_dev->pdev[i];
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket:	Quick Path Interconnect socket
+ * @channels:	Number of channels that will be returned
+ * @csrows:	Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+				      unsigned *csrows)
+{
+	struct pci_dev *pdev = NULL;
+	int i, j;
+	u32 status, control;
+
+	*channels = 0;
+	*csrows = 0;
+
+	pdev = get_pdev_slot_func(socket, 3, 0);
+	if (!pdev) {
+		i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+			      socket);
+		return -ENODEV;
+	}
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_STATUS, &status);
+	pci_read_config_dword(pdev, MC_CONTROL, &control);
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 dimm_dod[3];
+		/* Check if the channel is active */
+		if (!(control & (1 << (8 + i))))
+			continue;
+
+		/* Check if the channel is disabled */
+		if (status & (1 << i))
+			continue;
+
+		pdev = get_pdev_slot_func(socket, i + 4, 1);
+		if (!pdev) {
+			i7core_printk(KERN_ERR, "Couldn't find socket %d "
+						"fn %d.%d!!!\n",
+						socket, i + 4, 1);
+			return -ENODEV;
+		}
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		(*channels)++;
+
+		for (j = 0; j < 3; j++) {
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+			(*csrows)++;
+		}
+	}
+
+	debugf0("Number of active channels on socket %d: %d\n",
+		socket, *channels);
+
+	return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct csrow_info *csr;
+	struct pci_dev *pdev;
+	int i, j;
+	unsigned long last_page = 0;
+	enum edac_type mode;
+	enum mem_type mtype;
+
+	/* Get data from the MC register, function 0 */
+	pdev = pvt->pci_mcr[0];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+	pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+	pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+	pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+	debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+		pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
+		pvt->info.max_dod, pvt->info.ch_map);
+
+	if (ECC_ENABLED(pvt)) {
+		debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+		if (ECCx8(pvt))
+			mode = EDAC_S8ECD8ED;
+		else
+			mode = EDAC_S4ECD4ED;
+	} else {
+		debugf0("ECC disabled\n");
+		mode = EDAC_NONE;
+	}
+
+	/* FIXME: need to handle the error codes */
+	debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+		"x%x x 0x%x\n",
+		numdimms(pvt->info.max_dod),
+		numrank(pvt->info.max_dod >> 2),
+		numbank(pvt->info.max_dod >> 4),
+		numrow(pvt->info.max_dod >> 6),
+		numcol(pvt->info.max_dod >> 9));
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 data, dimm_dod[3], value[8];
+
+		if (!pvt->pci_ch[i][0])
+			continue;
+
+		if (!CH_ACTIVE(pvt, i)) {
+			debugf0("Channel %i is not active\n", i);
+			continue;
+		}
+		if (CH_DISABLED(pvt, i)) {
+			debugf0("Channel %i is disabled\n", i);
+			continue;
+		}
+
+		/* Devices 4-6 function 0 */
+		pci_read_config_dword(pvt->pci_ch[i][0],
+				MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+		pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+						4 : 2;
+
+		if (data & REGISTERED_DIMM)
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+#if 0
+		if (data & THREE_DIMMS_PRESENT)
+			pvt->channel[i].dimms = 3;
+		else if (data & SINGLE_QUAD_RANK_PRESENT)
+			pvt->channel[i].dimms = 1;
+		else
+			pvt->channel[i].dimms = 2;
+#endif
+
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
+			"%d ranks, %cDIMMs\n",
+			i,
+			RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+			data,
+			pvt->channel[i].ranks,
+			(data & REGISTERED_DIMM) ? 'R' : 'U');
+
+		for (j = 0; j < 3; j++) {
+			u32 banks, ranks, rows, cols;
+			u32 size, npages;
+
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+
+			banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+			ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+			rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+			cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+			/* DDR3 has 8 I/O banks */
+			size = (rows * cols * banks * ranks) >> (20 - 3);
+
+			pvt->channel[i].dimms++;
+
+			debugf0("\tdimm %d %d Mb offset: %x, "
+				"bank: %d, rank: %d, row: %#x, col: %#x\n",
+				j, size,
+				RANKOFFSET(dimm_dod[j]),
+				banks, ranks, rows, cols);
+
+#if PAGE_SHIFT > 20
+			npages = size >> (PAGE_SHIFT - 20);
+#else
+			npages = size << (20 - PAGE_SHIFT);
+#endif
+
+			csr = &mci->csrows[*csrow];
+			csr->first_page = last_page + 1;
+			last_page += npages;
+			csr->last_page = last_page;
+			csr->nr_pages = npages;
+
+			csr->page_mask = 0;
+			csr->grain = 8;
+			csr->csrow_idx = *csrow;
+			csr->nr_channels = 1;
+
+			csr->channels[0].chan_idx = i;
+			csr->channels[0].ce_count = 0;
+
+			pvt->csrow_map[i][j] = *csrow;
+
+			switch (banks) {
+			case 4:
+				csr->dtype = DEV_X4;
+				break;
+			case 8:
+				csr->dtype = DEV_X8;
+				break;
+			case 16:
+				csr->dtype = DEV_X16;
+				break;
+			default:
+				csr->dtype = DEV_UNKNOWN;
+			}
+
+			csr->edac_mode = mode;
+			csr->mtype = mtype;
+
+			(*csrow)++;
+		}
+
+		pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+		pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+		pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+		pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+		pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+		pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+		pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+		pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+		debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+		for (j = 0; j < 8; j++)
+			debugf1("\t\t%#x\t%#x\t%#x\n",
+				(value[j] >> 27) & 0x1,
+				(value[j] >> 24) & 0x7,
+				(value[j] && ((1 << 24) - 1)));
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+			Error insertion routines
+ ****************************************************************************/
+
+/* The i7core has independent error injection features per channel.
+   However, to have a simpler code, we don't allow enabling error injection
+   on more than one channel.
+   Also, since a change at an inject parameter will be applied only at enable,
+   we're disabling error injection on all write calls to the sysfs nodes that
+   controls the error code injection.
+ */
+static int disable_inject(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	pvt->inject.enable = 0;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return -ENODEV;
+
+	pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+				MC_CHANNEL_ERROR_INJECT, 0);
+
+	return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - refers to the lower 32-byte half cacheline
+ *	bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
+					   const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 3))
+		return -EIO;
+
+	pvt->inject.section = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - repeat enable - Enable error repetition
+ *	bit 1 - inject ECC error
+ *	bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 7))
+		return -EIO;
+
+	pvt->inject.type = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if (rc < 0)
+		return -EIO;
+
+	pvt->inject.eccmask = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit)			\
+static ssize_t i7core_inject_store_##param(			\
+		struct mem_ctl_info *mci,			\
+		const char *data, size_t count)			\
+{								\
+	struct i7core_pvt *pvt;					\
+	long value;						\
+	int rc;							\
+								\
+	debugf1("%s()\n", __func__);				\
+	pvt = mci->pvt_info;					\
+								\
+	if (pvt->inject.enable)					\
+		disable_inject(mci);				\
+								\
+	if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+		value = -1;					\
+	else {							\
+		rc = strict_strtoul(data, 10, &value);		\
+		if ((rc < 0) || (value >= limit))		\
+			return -EIO;				\
+	}							\
+								\
+	pvt->inject.param = value;				\
+								\
+	return count;						\
+}								\
+								\
+static ssize_t i7core_inject_show_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt;					\
+								\
+	pvt = mci->pvt_info;					\
+	debugf1("%s() pvt=%p\n", __func__, pvt);		\
+	if (pvt->inject.param < 0)				\
+		return sprintf(data, "any\n");			\
+	else							\
+		return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param)					\
+	{							\
+		.attr = {					\
+			.name = #param,				\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_inject_show_##param,		\
+		.store = i7core_inject_store_##param,		\
+	}
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+	u32 read;
+	int count;
+
+	debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val);
+
+	for (count = 0; count < 10; count++) {
+		if (count)
+			msleep(100);
+		pci_write_config_dword(dev, where, val);
+		pci_read_config_dword(dev, where, &read);
+
+		if (read == val)
+			return 0;
+	}
+
+	i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+		"write=%08x. Read=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val, read);
+
+	return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ *    is reliable enough to check if the MC is using the
+ *    three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
+				       const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+	u64 mask = 0;
+	int  rc;
+	long enable;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	rc = strict_strtoul(data, 10, &enable);
+	if ((rc < 0))
+		return 0;
+
+	if (enable) {
+		pvt->inject.enable = 1;
+	} else {
+		disable_inject(mci);
+		return count;
+	}
+
+	/* Sets pvt->inject.dimm mask */
+	if (pvt->inject.dimm < 0)
+		mask |= 1LL << 41;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.dimm & 0x3LL) << 35;
+		else
+			mask |= (pvt->inject.dimm & 0x1LL) << 36;
+	}
+
+	/* Sets pvt->inject.rank mask */
+	if (pvt->inject.rank < 0)
+		mask |= 1LL << 40;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.rank & 0x1LL) << 34;
+		else
+			mask |= (pvt->inject.rank & 0x3LL) << 34;
+	}
+
+	/* Sets pvt->inject.bank mask */
+	if (pvt->inject.bank < 0)
+		mask |= 1LL << 39;
+	else
+		mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+	/* Sets pvt->inject.page mask */
+	if (pvt->inject.page < 0)
+		mask |= 1LL << 38;
+	else
+		mask |= (pvt->inject.page & 0xffff) << 14;
+
+	/* Sets pvt->inject.column mask */
+	if (pvt->inject.col < 0)
+		mask |= 1LL << 37;
+	else
+		mask |= (pvt->inject.col & 0x3fff);
+
+	/*
+	 * bit    0: REPEAT_EN
+	 * bits 1-2: MASK_HALF_CACHELINE
+	 * bit    3: INJECT_ECC
+	 * bit    4: INJECT_ADDR_PARITY
+	 */
+
+	injectmask = (pvt->inject.type & 1) |
+		     (pvt->inject.section & 0x3) << 1 |
+		     (pvt->inject.type & 0x6) << (3 - 1);
+
+	/* Unlock writes to registers - this register is write only */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 0x2);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH, mask);
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, injectmask);
+
+	/*
+	 * This is something undocumented, based on my tests
+	 * Without writing 8 to this register, errors aren't injected. Not sure
+	 * why.
+	 */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 8);
+
+	debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
+		" inject 0x%08x\n",
+		mask, pvt->inject.eccmask, injectmask);
+
+
+	return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
+					char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+	debugf0("Inject error read: 0x%018x\n", injectmask);
+
+	if (injectmask & 0x0c)
+		pvt->inject.enable = 1;
+
+	return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param)					\
+static ssize_t i7core_show_counter_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt = mci->pvt_info;			\
+								\
+	debugf1("%s() \n", __func__);				\
+	if (!pvt->ce_count_available || (pvt->is_registered))	\
+		return sprintf(data, "data unavailable\n");	\
+	return sprintf(data, "%lu\n",				\
+			pvt->udimm_ce_count[param]);		\
+}
+
+#define ATTR_COUNTER(param)					\
+	{							\
+		.attr = {					\
+			.name = __stringify(udimm##param),	\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_show_counter_##param		\
+	}
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+/*
+ * Sysfs struct
+ */
+
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+	ATTR_ADDR_MATCH(channel),
+	ATTR_ADDR_MATCH(dimm),
+	ATTR_ADDR_MATCH(rank),
+	ATTR_ADDR_MATCH(bank),
+	ATTR_ADDR_MATCH(page),
+	ATTR_ADDR_MATCH(col),
+	{ .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+	.name  = "inject_addrmatch",
+	.mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+	ATTR_COUNTER(0),
+	ATTR_COUNTER(1),
+	ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+	.name  = "all_channel_counts",
+	.mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
+	{
+		.attr = {
+			.name = "inject_section",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_section_show,
+		.store = i7core_inject_section_store,
+	}, {
+		.attr = {
+			.name = "inject_type",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_type_show,
+		.store = i7core_inject_type_store,
+	}, {
+		.attr = {
+			.name = "inject_eccmask",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_eccmask_show,
+		.store = i7core_inject_eccmask_store,
+	}, {
+		.grp = &i7core_inject_addrmatch,
+	}, {
+		.attr = {
+			.name = "inject_enable",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_enable_show,
+		.store = i7core_inject_enable_store,
+	},
+	{ .attr = { .name = NULL } },	/* Reserved for udimm counters */
+	{ .attr = { .name = NULL } }
+};
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	i7core_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+	int i;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		struct pci_dev *pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+		debugf0("Removing dev %02x:%02x.%d\n",
+			pdev->bus->number,
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+	kfree(i7core_dev->pdev);
+	list_del(&i7core_dev->list);
+	kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+	struct i7core_dev *i7core_dev, *tmp;
+
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+		i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+	struct pci_dev *pdev = NULL;
+	int i;
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+	 * aren't announced by acpi. So, we need to use a legacy scan probing
+	 * to detect them
+	 */
+	while (table && table->descr) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+		if (unlikely(!pdev)) {
+			for (i = 0; i < MAX_SOCKET_BUSES; i++)
+				pcibios_scan_specific_bus(255-i);
+		}
+		pci_dev_put(pdev);
+		table++;
+	}
+}
+
+static unsigned i7core_pci_lastbus(void)
+{
+	int last_bus = 0, bus;
+	struct pci_bus *b = NULL;
+
+	while ((b = pci_find_next_bus(b)) != NULL) {
+		bus = b->number;
+		debugf0("Found bus %d\n", bus);
+		if (bus > last_bus)
+			last_bus = bus;
+	}
+
+	debugf0("Last bus %d\n", last_bus);
+
+	return last_bus;
+}
+
+/*
+ *	i7core_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+			 struct pci_id_descr *dev_descr, unsigned n_devs,
+			 unsigned last_bus)
+{
+	struct i7core_dev *i7core_dev;
+
+	struct pci_dev *pdev = NULL;
+	u8 bus = 0;
+	u8 socket = 0;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+	 * to probe for the alternate address in case of failure
+	 */
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+				      *prev);
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		if (devno == 0)
+			return -ENODEV;
+
+		i7core_printk(KERN_INFO,
+			"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+			dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	bus = pdev->bus->number;
+
+	socket = last_bus - bus;
+
+	i7core_dev = get_i7core_dev(socket);
+	if (!i7core_dev) {
+		i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+		if (!i7core_dev)
+			return -ENOMEM;
+		i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+					   GFP_KERNEL);
+		if (!i7core_dev->pdev) {
+			kfree(i7core_dev);
+			return -ENOMEM;
+		}
+		i7core_dev->socket = socket;
+		i7core_dev->n_devs = n_devs;
+		list_add_tail(&i7core_dev->list, &i7core_edac_list);
+	}
+
+	if (i7core_dev->pdev[devno]) {
+		i7core_printk(KERN_ERR,
+			"Duplicated device for "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	i7core_dev->pdev[devno] = pdev;
+
+	/* Sanity check */
+	if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+			PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+		i7core_printk(KERN_ERR,
+			"Device PCI ID %04x:%04x "
+			"has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+			bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			bus, dev_descr->dev, dev_descr->func);
+		return -ENODEV;
+	}
+
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		i7core_printk(KERN_ERR,
+			"Couldn't enable "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+		socket, bus, dev_descr->dev,
+		dev_descr->func,
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+static int i7core_get_devices(struct pci_id_table *table)
+{
+	int i, rc, last_bus;
+	struct pci_dev *pdev = NULL;
+	struct pci_id_descr *dev_descr;
+
+	last_bus = i7core_pci_lastbus();
+
+	while (table && table->descr) {
+		dev_descr = table->descr;
+		for (i = 0; i < table->n_devs; i++) {
+			pdev = NULL;
+			do {
+				rc = i7core_get_onedevice(&pdev, i,
+							  &dev_descr[i],
+							  table->n_devs,
+							  last_bus);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs;
+						break;
+					}
+					i7core_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev);
+		}
+		table++;
+	}
+
+	return 0;
+	return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+			 struct i7core_dev *i7core_dev)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, func, slot;
+
+	/* Associates i7core_dev and mci for future usage */
+	pvt->i7core_dev = i7core_dev;
+	i7core_dev->mci = mci;
+
+	pvt->is_registered = 0;
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		func = PCI_FUNC(pdev->devfn);
+		slot = PCI_SLOT(pdev->devfn);
+		if (slot == 3) {
+			if (unlikely(func > MAX_MCR_FUNC))
+				goto error;
+			pvt->pci_mcr[func] = pdev;
+		} else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+			if (unlikely(func > MAX_CHAN_FUNC))
+				goto error;
+			pvt->pci_ch[slot - 4][func] = pdev;
+		} else if (!slot && !func)
+			pvt->pci_noncore = pdev;
+		else
+			goto error;
+
+		debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			pdev, i7core_dev->socket);
+
+		if (PCI_SLOT(pdev->devfn) == 3 &&
+			PCI_FUNC(pdev->devfn) == 2)
+			pvt->is_registered = 1;
+	}
+
+	/*
+	 * Add extra nodes to count errors on udimm
+	 * For registered memory, this is not needed, since the counters
+	 * are already displayed at the standard locations
+	 */
+	if (!pvt->is_registered)
+		i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+			&i7core_udimm_counters;
+
+	return 0;
+
+error:
+	i7core_printk(KERN_ERR, "Device %d, function %d "
+		      "is out of the expected range\n",
+		      slot, func);
+	return -EINVAL;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+					 int chan, int dimm, int add)
+{
+	char *msg;
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int row = pvt->csrow_map[chan][dimm], i;
+
+	for (i = 0; i < add; i++) {
+		msg = kasprintf(GFP_KERNEL, "Corrected error "
+				"(Socket=%d channel=%d dimm=%d)",
+				pvt->i7core_dev->socket, chan, dimm);
+
+		edac_mc_handle_fbd_ce(mci, row, 0, msg);
+		kfree (msg);
+	}
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+			int chan, int new0, int new1, int new2)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int add0 = 0, add1 = 0, add2 = 0;
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+
+		add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+		add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+		add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->rdimm_ce_count[chan][2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->rdimm_ce_count[chan][1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->rdimm_ce_count[chan][0] += add0;
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->rdimm_last_ce_count[chan][2] = new2;
+	pvt->rdimm_last_ce_count[chan][1] = new1;
+	pvt->rdimm_last_ce_count[chan][0] = new0;
+
+	/*updated the edac core */
+	if (add0 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 0, add0);
+	if (add1 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 1, add1);
+	if (add2 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv[3][2];
+	int i, new0, new1, new2;
+
+	/*Read DEV 3: FUN 2:  MC_COR_ECC_CNT regs directly*/
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+								&rcv[0][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+								&rcv[0][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+								&rcv[1][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+								&rcv[1][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+								&rcv[2][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+								&rcv[2][1]);
+	for (i = 0 ; i < 3; i++) {
+		debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+			(i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+		/*if the channel has 3 dimms*/
+		if (pvt->channel[i].dimms > 2) {
+			new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+			new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+		} else {
+			new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+					DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+					DIMM_BOT_COR_ERR(rcv[i][1]);
+			new2 = 0;
+		}
+
+		i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+	}
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv1, rcv0;
+	int new0, new1, new2;
+
+	if (!pvt->pci_mcr[4]) {
+		debugf0("%s MCR registers not found\n", __func__);
+		return;
+	}
+
+	/* Corrected test errors */
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+	/* Store the new values */
+	new2 = DIMM2_COR_ERR(rcv1);
+	new1 = DIMM1_COR_ERR(rcv0);
+	new0 = DIMM0_COR_ERR(rcv0);
+
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+		int add0, add1, add2;
+
+		add2 = new2 - pvt->udimm_last_ce_count[2];
+		add1 = new1 - pvt->udimm_last_ce_count[1];
+		add0 = new0 - pvt->udimm_last_ce_count[0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->udimm_ce_count[2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->udimm_ce_count[1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->udimm_ce_count[0] += add0;
+
+		if (add0 | add1 | add2)
+			i7core_printk(KERN_ERR, "New Corrected error(s): "
+				      "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+				      add0, add1, add2);
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->udimm_last_ce_count[2] = new2;
+	pvt->udimm_last_ce_count[1] = new1;
+	pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ *     struct mce field	MCA Register
+ *     m->status	MSR_IA32_MC8_STATUS
+ *     m->addr		MSR_IA32_MC8_ADDR
+ *     m->misc		MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+				    struct mce *m)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	char *type, *optype, *err, *msg;
+	unsigned long error = m->status & 0x1ff0000l;
+	u32 optypenum = (m->status >> 4) & 0x07;
+	u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+	u32 dimm = (m->misc >> 16) & 0x3;
+	u32 channel = (m->misc >> 18) & 0x3;
+	u32 syndrome = m->misc >> 32;
+	u32 errnum = find_first_bit(&error, 32);
+	int csrow;
+
+	if (m->mcgstatus & 1)
+		type = "FATAL";
+	else
+		type = "NON_FATAL";
+
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request";
+		break;
+	case 1:
+		optype = "read error";
+		break;
+	case 2:
+		optype = "write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
+	}
+
+	switch (errnum) {
+	case 16:
+		err = "read ECC error";
+		break;
+	case 17:
+		err = "RAS ECC error";
+		break;
+	case 18:
+		err = "write parity error";
+		break;
+	case 19:
+		err = "redundacy loss";
+		break;
+	case 20:
+		err = "reserved";
+		break;
+	case 21:
+		err = "memory range error";
+		break;
+	case 22:
+		err = "RTID out of range";
+		break;
+	case 23:
+		err = "address parity error";
+		break;
+	case 24:
+		err = "byte enable parity error";
+		break;
+	default:
+		err = "unknown";
+	}
+
+	/* FIXME: should convert addr into bank and rank information */
+	msg = kasprintf(GFP_ATOMIC,
+		"%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+		"syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+		type, (long long) m->addr, m->cpu, dimm, channel,
+		syndrome, core_err_cnt, (long long)m->status,
+		(long long)m->misc, optype, err);
+
+	debugf0("%s", msg);
+
+	csrow = pvt->csrow_map[channel][dimm];
+
+	/* Call the helper to output message */
+	if (m->mcgstatus & 1)
+		edac_mc_handle_fbd_ue(mci, csrow, 0,
+				0 /* FIXME: should be channel here */, msg);
+	else if (!pvt->is_registered)
+		edac_mc_handle_fbd_ce(mci, csrow,
+				0 /* FIXME: should be channel here */, msg);
+
+	kfree(msg);
+}
+
+/*
+ *	i7core_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int i;
+	unsigned count = 0;
+	struct mce *m;
+
+	/*
+	 * MCE first step: Copy all mce errors into a temporary buffer
+	 * We use a double buffering here, to reduce the risk of
+	 * loosing an error.
+	 */
+	smp_rmb();
+	count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+		% MCE_LOG_LEN;
+	if (!count)
+		goto check_ce_error;
+
+	m = pvt->mce_outentry;
+	if (pvt->mce_in + count > MCE_LOG_LEN) {
+		unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+		memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+		smp_wmb();
+		pvt->mce_in = 0;
+		count -= l;
+		m += l;
+	}
+	memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+	smp_wmb();
+	pvt->mce_in += count;
+
+	smp_rmb();
+	if (pvt->mce_overrun) {
+		i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+			      pvt->mce_overrun);
+		smp_wmb();
+		pvt->mce_overrun = 0;
+	}
+
+	/*
+	 * MCE second step: parse errors and display
+	 */
+	for (i = 0; i < count; i++)
+		i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+	/*
+	 * Now, let's increment CE error counts
+	 */
+check_ce_error:
+	if (!pvt->is_registered)
+		i7core_udimm_check_mc_ecc_err(mci);
+	else
+		i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * i7core_mce_check_error	Replicates mcelog routine to get errors
+ *				This routine simply queues mcelog errors, and
+ *				return. The error itself should be handled later
+ *				by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int i7core_mce_check_error(void *priv, struct mce *mce)
+{
+	struct mem_ctl_info *mci = priv;
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller
+	 */
+	if (((mce->status & 0xffff) >> 7) != 1)
+		return 0;
+
+	/* Bank 8 registers are the only ones that we know how to handle */
+	if (mce->bank != 8)
+		return 0;
+
+#ifdef CONFIG_SMP
+	/* Only handle if it is the right mc controller */
+	if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+		return 0;
+#endif
+
+	smp_rmb();
+	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+		smp_wmb();
+		pvt->mce_overrun++;
+		return 0;
+	}
+
+	/* Copy memory error at the ringbuffer */
+	memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+	smp_wmb();
+	pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+	/* Handle fatal errors immediately */
+	if (mce->mcgstatus & 1)
+		i7core_check_error(mci);
+
+	/* Advice mcelog that the error were handled */
+	return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+			       int num_channels, int num_csrows)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+	int csrow = 0;
+	int rc;
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+			    i7core_dev->socket);
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+	/* record ptr to the generic device */
+	mci->dev = &i7core_dev->pdev[0]->dev;
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/*
+	 * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+	 * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+	 * memory channels
+	 */
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7core_edac.c";
+	mci->mod_ver = I7CORE_REVISION;
+	mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+				  i7core_dev->socket);
+	mci->dev_name = pci_name(i7core_dev->pdev[0]);
+	mci->ctl_page_to_phys = NULL;
+	mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7core_check_error;
+
+	/* Store pci devices at mci for faster access */
+	rc = mci_bind_devs(mci, i7core_dev);
+	if (unlikely(rc < 0))
+		goto fail;
+
+	/* Get dimm basic config */
+	get_dimm_config(mci, &csrow);
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+						 EDAC_MOD_STR);
+	if (unlikely(!i7core_pci)) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* Default error mask is any memory */
+	pvt->inject.channel = 0;
+	pvt->inject.dimm = -1;
+	pvt->inject.rank = -1;
+	pvt->inject.bank = -1;
+	pvt->inject.page = -1;
+	pvt->inject.col = -1;
+
+	/* Registers on edac_mce in order to receive memory errors */
+	pvt->edac_mce.priv = mci;
+	pvt->edac_mce.check_error = i7core_mce_check_error;
+
+	rc = edac_mce_register(&pvt->edac_mce);
+	if (unlikely(rc < 0)) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mce_register()\n", __func__);
+	}
+
+fail:
+	if (rc < 0)
+		edac_mc_free(mci);
+	return rc;
+}
+
+/*
+ *	i7core_probe	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+
+static int probed = 0;
+
+static int __devinit i7core_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int rc;
+	struct i7core_dev *i7core_dev;
+
+	/* get the pci devices we want to reserve for our use */
+	mutex_lock(&i7core_edac_lock);
+
+	/*
+	 * All memory controllers are allocated at the first pass.
+	 */
+	if (unlikely(probed >= 1)) {
+		mutex_unlock(&i7core_edac_lock);
+		return -EINVAL;
+	}
+	probed++;
+
+	rc = i7core_get_devices(pci_dev_table);
+	if (unlikely(rc < 0))
+		goto fail0;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		int channels;
+		int csrows;
+
+		/* Check the number of active and not disabled channels */
+		rc = i7core_get_active_channels(i7core_dev->socket,
+						&channels, &csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+
+		rc = i7core_register_mci(i7core_dev, channels, csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	i7core_printk(KERN_INFO, "Driver loaded.\n");
+
+	mutex_unlock(&i7core_edac_lock);
+	return 0;
+
+fail1:
+	i7core_put_all_devices();
+fail0:
+	mutex_unlock(&i7core_edac_lock);
+	return rc;
+}
+
+/*
+ *	i7core_remove	destructor for one instance of device
+ *
+ */
+static void __devexit i7core_remove(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_dev *i7core_dev, *tmp;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	if (i7core_pci)
+		edac_pci_release_generic_ctl(i7core_pci);
+
+	/*
+	 * we have a trouble here: pdev value for removal will be wrong, since
+	 * it will point to the X58 register used to detect that the machine
+	 * is a Nehalem or upper design. However, due to the way several PCI
+	 * devices are grouped together to provide MC functionality, we need
+	 * to use a different method for releasing the devices
+	 */
+
+	mutex_lock(&i7core_edac_lock);
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+		mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+		if (mci) {
+			struct i7core_pvt *pvt = mci->pvt_info;
+
+			i7core_dev = pvt->i7core_dev;
+			edac_mce_unregister(&pvt->edac_mce);
+			kfree(mci->ctl_name);
+			edac_mc_free(mci);
+			i7core_put_devices(i7core_dev);
+		} else {
+			i7core_printk(KERN_ERR,
+				      "Couldn't find mci for socket %d\n",
+				      i7core_dev->socket);
+		}
+	}
+	probed--;
+
+	mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ *	i7core_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+	.name     = "i7core_edac",
+	.probe    = i7core_probe,
+	.remove   = __devexit_p(i7core_remove),
+	.id_table = i7core_pci_tbl,
+};
+
+/*
+ *	i7core_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	i7core_xeon_pci_fixup(pci_dev_table);
+
+	pci_rc = pci_register_driver(&i7core_driver);
+
+	if (pci_rc >= 0)
+		return 0;
+
+	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      pci_rc);
+
+	return pci_rc;
+}
+
+/*
+ *	i7core_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&i7core_driver);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+		   I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 6c1886b497f..1052340e680 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -229,7 +229,7 @@ static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
 
 	pdata->edac_idx = edac_pci_idx++;
 
-	res = of_address_to_resource(op->node, 0, &r);
+	res = of_address_to_resource(op->dev.of_node, 0, &r);
 	if (res) {
 		printk(KERN_ERR "%s: Unable to get resource for "
 		       "PCI err regs\n", __func__);
@@ -274,7 +274,7 @@ static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
 	}
 
 	if (edac_op_state == EDAC_OPSTATE_INT) {
-		pdata->irq = irq_of_parse_and_map(op->node, 0);
+		pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
 		res = devm_request_irq(&op->dev, pdata->irq,
 				       mpc85xx_pci_isr, IRQF_DISABLED,
 				       "[EDAC] PCI err", pci);
@@ -336,6 +336,7 @@ static struct of_device_id mpc85xx_pci_err_of_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
 
 static struct of_platform_driver mpc85xx_pci_err_driver = {
 	.probe = mpc85xx_pci_err_probe,
@@ -529,7 +530,7 @@ static int __devinit mpc85xx_l2_err_probe(struct of_device *op,
 	edac_dev->ctl_name = pdata->name;
 	edac_dev->dev_name = pdata->name;
 
-	res = of_address_to_resource(op->node, 0, &r);
+	res = of_address_to_resource(op->dev.of_node, 0, &r);
 	if (res) {
 		printk(KERN_ERR "%s: Unable to get resource for "
 		       "L2 err regs\n", __func__);
@@ -576,7 +577,7 @@ static int __devinit mpc85xx_l2_err_probe(struct of_device *op,
 	}
 
 	if (edac_op_state == EDAC_OPSTATE_INT) {
-		pdata->irq = irq_of_parse_and_map(op->node, 0);
+		pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
 		res = devm_request_irq(&op->dev, pdata->irq,
 				       mpc85xx_l2_isr, IRQF_DISABLED,
 				       "[EDAC] L2 err", edac_dev);
@@ -650,6 +651,7 @@ static struct of_device_id mpc85xx_l2_err_of_match[] = {
 	{ .compatible = "fsl,p2020-l2-cache-controller", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
 
 static struct of_platform_driver mpc85xx_l2_err_driver = {
 	.probe = mpc85xx_l2_err_probe,
@@ -978,7 +980,7 @@ static int __devinit mpc85xx_mc_err_probe(struct of_device *op,
 	mci->ctl_name = pdata->name;
 	mci->dev_name = pdata->name;
 
-	res = of_address_to_resource(op->node, 0, &r);
+	res = of_address_to_resource(op->dev.of_node, 0, &r);
 	if (res) {
 		printk(KERN_ERR "%s: Unable to get resource for MC err regs\n",
 		       __func__);
@@ -1052,7 +1054,7 @@ static int __devinit mpc85xx_mc_err_probe(struct of_device *op,
 		out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_SBE, 0x10000);
 
 		/* register interrupts */
-		pdata->irq = irq_of_parse_and_map(op->node, 0);
+		pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
 		res = devm_request_irq(&op->dev, pdata->irq,
 				       mpc85xx_mc_isr,
 					IRQF_DISABLED | IRQF_SHARED,
@@ -1120,11 +1122,13 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = {
 	{ .compatible = "fsl,mpc8555-memory-controller", },
 	{ .compatible = "fsl,mpc8560-memory-controller", },
 	{ .compatible = "fsl,mpc8568-memory-controller", },
+	{ .compatible = "fsl,mpc8569-memory-controller", },
 	{ .compatible = "fsl,mpc8572-memory-controller", },
 	{ .compatible = "fsl,mpc8349-memory-controller", },
 	{ .compatible = "fsl,p2020-memory-controller", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
 
 static struct of_platform_driver mpc85xx_mc_err_driver = {
 	.probe = mpc85xx_mc_err_probe,
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 9d6f6783328..e78839e89a0 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -1022,7 +1022,7 @@ ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
 	int status = 0;
 	const u32 memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
 	struct ppc4xx_edac_pdata *pdata = NULL;
-	const struct device_node *np = op->node;
+	const struct device_node *np = op->dev.of_node;
 
 	if (match == NULL)
 		return -EINVAL;
@@ -1113,7 +1113,7 @@ ppc4xx_edac_register_irq(struct of_device *op, struct mem_ctl_info *mci)
 	int status = 0;
 	int ded_irq, sec_irq;
 	struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
-	struct device_node *np = op->node;
+	struct device_node *np = op->dev.of_node;
 
 	ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX);
 	sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX);
@@ -1243,7 +1243,7 @@ ppc4xx_edac_probe(struct of_device *op, const struct of_device_id *match)
 	int status = 0;
 	u32 mcopt1, memcheck;
 	dcr_host_t dcr_host;
-	const struct device_node *np = op->node;
+	const struct device_node *np = op->dev.of_node;
 	struct mem_ctl_info *mci = NULL;
 	static int ppc4xx_edac_instance;
 
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 9dcb30466ec..371713ff026 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -231,7 +231,7 @@ void fw_schedule_bm_work(struct fw_card *card, unsigned long delay)
 static void fw_card_bm_work(struct work_struct *work)
 {
 	struct fw_card *card = container_of(work, struct fw_card, work.work);
-	struct fw_device *root_device;
+	struct fw_device *root_device, *irm_device;
 	struct fw_node *root_node;
 	unsigned long flags;
 	int root_id, new_root_id, irm_id, local_id;
@@ -239,6 +239,7 @@ static void fw_card_bm_work(struct work_struct *work)
 	bool do_reset = false;
 	bool root_device_is_running;
 	bool root_device_is_cmc;
+	bool irm_is_1394_1995_only;
 
 	spin_lock_irqsave(&card->lock, flags);
 
@@ -248,12 +249,18 @@ static void fw_card_bm_work(struct work_struct *work)
 	}
 
 	generation = card->generation;
+
 	root_node = card->root_node;
 	fw_node_get(root_node);
 	root_device = root_node->data;
 	root_device_is_running = root_device &&
 			atomic_read(&root_device->state) == FW_DEVICE_RUNNING;
 	root_device_is_cmc = root_device && root_device->cmc;
+
+	irm_device = card->irm_node->data;
+	irm_is_1394_1995_only = irm_device && irm_device->config_rom &&
+			(irm_device->config_rom[2] & 0x000000f0) == 0;
+
 	root_id  = root_node->node_id;
 	irm_id   = card->irm_node->node_id;
 	local_id = card->local_node->node_id;
@@ -276,8 +283,15 @@ static void fw_card_bm_work(struct work_struct *work)
 
 		if (!card->irm_node->link_on) {
 			new_root_id = local_id;
-			fw_notify("IRM has link off, making local node (%02x) root.\n",
-				  new_root_id);
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "IRM has link off", new_root_id);
+			goto pick_me;
+		}
+
+		if (irm_is_1394_1995_only) {
+			new_root_id = local_id;
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "IRM is not 1394a compliant", new_root_id);
 			goto pick_me;
 		}
 
@@ -316,8 +330,8 @@ static void fw_card_bm_work(struct work_struct *work)
 			 * root, and thus, IRM.
 			 */
 			new_root_id = local_id;
-			fw_notify("BM lock failed, making local node (%02x) root.\n",
-				  new_root_id);
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "BM lock failed", new_root_id);
 			goto pick_me;
 		}
 	} else if (card->bm_generation != generation) {
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 1b03ba1d083..a6c670b8ce5 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -122,8 +122,17 @@ config ISCSI_IBFT_FIND
 	  is necessary for iSCSI Boot Firmware Table Attributes module to work
 	  properly.
 
+config ISCSI_BOOT_SYSFS
+	tristate "iSCSI Boot Sysfs Interface"
+	default	n
+	help
+	  This option enables support for exposing iSCSI boot information
+	  via sysfs to userspace. If you wish to export this information,
+	  say Y. Otherwise, say N.
+
 config ISCSI_IBFT
 	tristate "iSCSI Boot Firmware Table Attributes module"
+	select ISCSI_BOOT_SYSFS
 	depends on ISCSI_IBFT_FIND
 	default	n
 	help
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 1c3c17343db..5fe7e166292 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_DCDBAS)		+= dcdbas.o
 obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
+obj-$(CONFIG_ISCSI_BOOT_SYSFS)	+= iscsi_boot_sysfs.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
diff --git a/drivers/firmware/iscsi_boot_sysfs.c b/drivers/firmware/iscsi_boot_sysfs.c
new file mode 100644
index 00000000000..df6bff7366c
--- /dev/null
+++ b/drivers/firmware/iscsi_boot_sysfs.c
@@ -0,0 +1,481 @@
+/*
+ * Export the iSCSI boot info to userland via sysfs.
+ *
+ * Copyright (C) 2010 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2010 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/capability.h>
+#include <linux/iscsi_boot_sysfs.h>
+
+
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
+MODULE_DESCRIPTION("sysfs interface and helpers to export iSCSI boot information");
+MODULE_LICENSE("GPL");
+/*
+ * The kobject and attribute structures.
+ */
+struct iscsi_boot_attr {
+	struct attribute attr;
+	int type;
+	ssize_t (*show) (void *data, int type, char *buf);
+};
+
+/*
+ * The routine called for all sysfs attributes.
+ */
+static ssize_t iscsi_boot_show_attribute(struct kobject *kobj,
+					 struct attribute *attr, char *buf)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+	struct iscsi_boot_attr *boot_attr =
+			container_of(attr, struct iscsi_boot_attr, attr);
+	ssize_t ret = -EIO;
+	char *str = buf;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (boot_kobj->show)
+		ret = boot_kobj->show(boot_kobj->data, boot_attr->type, str);
+	return ret;
+}
+
+static const struct sysfs_ops iscsi_boot_attr_ops = {
+	.show = iscsi_boot_show_attribute,
+};
+
+static void iscsi_boot_kobj_release(struct kobject *kobj)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	kfree(boot_kobj->data);
+	kfree(boot_kobj);
+}
+
+static struct kobj_type iscsi_boot_ktype = {
+	.release = iscsi_boot_kobj_release,
+	.sysfs_ops = &iscsi_boot_attr_ops,
+};
+
+#define iscsi_boot_rd_attr(fnname, sysfs_name, attr_type)		\
+static struct iscsi_boot_attr iscsi_boot_attr_##fnname = {	\
+	.attr	= { .name = __stringify(sysfs_name), .mode = 0444 },	\
+	.type	= attr_type,						\
+}
+
+/* Target attrs */
+iscsi_boot_rd_attr(tgt_index, index, ISCSI_BOOT_TGT_INDEX);
+iscsi_boot_rd_attr(tgt_flags, flags, ISCSI_BOOT_TGT_FLAGS);
+iscsi_boot_rd_attr(tgt_ip, ip-addr, ISCSI_BOOT_TGT_IP_ADDR);
+iscsi_boot_rd_attr(tgt_port, port, ISCSI_BOOT_TGT_PORT);
+iscsi_boot_rd_attr(tgt_lun, lun, ISCSI_BOOT_TGT_LUN);
+iscsi_boot_rd_attr(tgt_chap, chap-type, ISCSI_BOOT_TGT_CHAP_TYPE);
+iscsi_boot_rd_attr(tgt_nic, nic-assoc, ISCSI_BOOT_TGT_NIC_ASSOC);
+iscsi_boot_rd_attr(tgt_name, target-name, ISCSI_BOOT_TGT_NAME);
+iscsi_boot_rd_attr(tgt_chap_name, chap-name, ISCSI_BOOT_TGT_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_secret, chap-secret, ISCSI_BOOT_TGT_CHAP_SECRET);
+iscsi_boot_rd_attr(tgt_chap_rev_name, rev-chap-name,
+		   ISCSI_BOOT_TGT_REV_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_rev_secret, rev-chap-name-secret,
+		   ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+
+static struct attribute *target_attrs[] = {
+	&iscsi_boot_attr_tgt_index.attr,
+	&iscsi_boot_attr_tgt_flags.attr,
+	&iscsi_boot_attr_tgt_ip.attr,
+	&iscsi_boot_attr_tgt_port.attr,
+	&iscsi_boot_attr_tgt_lun.attr,
+	&iscsi_boot_attr_tgt_chap.attr,
+	&iscsi_boot_attr_tgt_nic.attr,
+	&iscsi_boot_attr_tgt_name.attr,
+	&iscsi_boot_attr_tgt_chap_name.attr,
+	&iscsi_boot_attr_tgt_chap_secret.attr,
+	&iscsi_boot_attr_tgt_chap_rev_name.attr,
+	&iscsi_boot_attr_tgt_chap_rev_secret.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_tgt_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_tgt_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_INDEX);
+	else if (attr == &iscsi_boot_attr_tgt_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_FLAGS);
+	else if (attr == &iscsi_boot_attr_tgt_ip.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_IP_ADDR);
+	else if (attr == &iscsi_boot_attr_tgt_port.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_PORT);
+	else if (attr == &iscsi_boot_attr_tgt_lun.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_LUN);
+	else if (attr == &iscsi_boot_attr_tgt_chap.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_TYPE);
+	else if (attr == &iscsi_boot_attr_tgt_nic.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_NIC_ASSOC);
+	else if (attr == &iscsi_boot_attr_tgt_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_secret.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_SECRET);
+	else if (attr == &iscsi_boot_attr_tgt_chap_rev_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_REV_CHAP_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_rev_secret.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_target_attr_group = {
+	.attrs = target_attrs,
+	.is_visible = iscsi_boot_tgt_attr_is_visible,
+};
+
+/* Ethernet attrs */
+iscsi_boot_rd_attr(eth_index, index, ISCSI_BOOT_ETH_INDEX);
+iscsi_boot_rd_attr(eth_flags, flags, ISCSI_BOOT_ETH_FLAGS);
+iscsi_boot_rd_attr(eth_ip, ip-addr, ISCSI_BOOT_ETH_IP_ADDR);
+iscsi_boot_rd_attr(eth_subnet, subnet-mask, ISCSI_BOOT_ETH_SUBNET_MASK);
+iscsi_boot_rd_attr(eth_origin, origin, ISCSI_BOOT_ETH_ORIGIN);
+iscsi_boot_rd_attr(eth_gateway, gateway, ISCSI_BOOT_ETH_GATEWAY);
+iscsi_boot_rd_attr(eth_primary_dns, primary-dns, ISCSI_BOOT_ETH_PRIMARY_DNS);
+iscsi_boot_rd_attr(eth_secondary_dns, secondary-dns,
+		   ISCSI_BOOT_ETH_SECONDARY_DNS);
+iscsi_boot_rd_attr(eth_dhcp, dhcp, ISCSI_BOOT_ETH_DHCP);
+iscsi_boot_rd_attr(eth_vlan, vlan, ISCSI_BOOT_ETH_VLAN);
+iscsi_boot_rd_attr(eth_mac, mac, ISCSI_BOOT_ETH_MAC);
+iscsi_boot_rd_attr(eth_hostname, hostname, ISCSI_BOOT_ETH_HOSTNAME);
+
+static struct attribute *ethernet_attrs[] = {
+	&iscsi_boot_attr_eth_index.attr,
+	&iscsi_boot_attr_eth_flags.attr,
+	&iscsi_boot_attr_eth_ip.attr,
+	&iscsi_boot_attr_eth_subnet.attr,
+	&iscsi_boot_attr_eth_origin.attr,
+	&iscsi_boot_attr_eth_gateway.attr,
+	&iscsi_boot_attr_eth_primary_dns.attr,
+	&iscsi_boot_attr_eth_secondary_dns.attr,
+	&iscsi_boot_attr_eth_dhcp.attr,
+	&iscsi_boot_attr_eth_vlan.attr,
+	&iscsi_boot_attr_eth_mac.attr,
+	&iscsi_boot_attr_eth_hostname.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_eth_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_eth_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_INDEX);
+	else if (attr ==  &iscsi_boot_attr_eth_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_FLAGS);
+	else if (attr ==  &iscsi_boot_attr_eth_ip.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_IP_ADDR);
+	else if (attr ==  &iscsi_boot_attr_eth_subnet.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_SUBNET_MASK);
+	else if (attr ==  &iscsi_boot_attr_eth_origin.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_ORIGIN);
+	else if (attr ==  &iscsi_boot_attr_eth_gateway.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_GATEWAY);
+	else if (attr ==  &iscsi_boot_attr_eth_primary_dns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_PRIMARY_DNS);
+	else if (attr ==  &iscsi_boot_attr_eth_secondary_dns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_SECONDARY_DNS);
+	else if (attr ==  &iscsi_boot_attr_eth_dhcp.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_DHCP);
+	else if (attr ==  &iscsi_boot_attr_eth_vlan.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_VLAN);
+	else if (attr ==  &iscsi_boot_attr_eth_mac.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_MAC);
+	else if (attr ==  &iscsi_boot_attr_eth_hostname.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_HOSTNAME);
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_ethernet_attr_group = {
+	.attrs = ethernet_attrs,
+	.is_visible = iscsi_boot_eth_attr_is_visible,
+};
+
+/* Initiator attrs */
+iscsi_boot_rd_attr(ini_index, index, ISCSI_BOOT_INI_INDEX);
+iscsi_boot_rd_attr(ini_flags, flags, ISCSI_BOOT_INI_FLAGS);
+iscsi_boot_rd_attr(ini_isns, isns-server, ISCSI_BOOT_INI_ISNS_SERVER);
+iscsi_boot_rd_attr(ini_slp, slp-server, ISCSI_BOOT_INI_SLP_SERVER);
+iscsi_boot_rd_attr(ini_primary_radius, pri-radius-server,
+		   ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_secondary_radius, sec-radius-server,
+		   ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_name, initiator-name, ISCSI_BOOT_INI_INITIATOR_NAME);
+
+static struct attribute *initiator_attrs[] = {
+	&iscsi_boot_attr_ini_index.attr,
+	&iscsi_boot_attr_ini_flags.attr,
+	&iscsi_boot_attr_ini_isns.attr,
+	&iscsi_boot_attr_ini_slp.attr,
+	&iscsi_boot_attr_ini_primary_radius.attr,
+	&iscsi_boot_attr_ini_secondary_radius.attr,
+	&iscsi_boot_attr_ini_name.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_ini_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_ini_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_INDEX);
+	if (attr ==  &iscsi_boot_attr_ini_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_FLAGS);
+	if (attr ==  &iscsi_boot_attr_ini_isns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_ISNS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_slp.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_SLP_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_primary_radius.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_secondary_radius.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_INITIATOR_NAME);
+
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_initiator_attr_group = {
+	.attrs = initiator_attrs,
+	.is_visible = iscsi_boot_ini_attr_is_visible,
+};
+
+static struct iscsi_boot_kobj *
+iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
+		       struct attribute_group *attr_group,
+		       const char *name, int index, void *data,
+		       ssize_t (*show) (void *data, int type, char *buf),
+		       mode_t (*is_visible) (void *data, int type))
+{
+	struct iscsi_boot_kobj *boot_kobj;
+
+	boot_kobj = kzalloc(sizeof(*boot_kobj), GFP_KERNEL);
+	if (!boot_kobj)
+		return NULL;
+	INIT_LIST_HEAD(&boot_kobj->list);
+
+	boot_kobj->kobj.kset = boot_kset->kset;
+	if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype,
+				 NULL, name, index)) {
+		kfree(boot_kobj);
+		return NULL;
+	}
+	boot_kobj->data = data;
+	boot_kobj->show = show;
+	boot_kobj->is_visible = is_visible;
+
+	if (sysfs_create_group(&boot_kobj->kobj, attr_group)) {
+		/*
+		 * We do not want to free this because the caller
+		 * will assume that since the creation call failed
+		 * the boot kobj was not setup and the normal release
+		 * path is not being run.
+		 */
+		boot_kobj->data = NULL;
+		kobject_put(&boot_kobj->kobj);
+		return NULL;
+	}
+	boot_kobj->attr_group = attr_group;
+
+	kobject_uevent(&boot_kobj->kobj, KOBJ_ADD);
+	/* Nothing broke so lets add it to the list. */
+	list_add_tail(&boot_kobj->list, &boot_kset->kobj_list);
+	return boot_kobj;
+}
+
+static void iscsi_boot_remove_kobj(struct iscsi_boot_kobj *boot_kobj)
+{
+	list_del(&boot_kobj->list);
+	sysfs_remove_group(&boot_kobj->kobj, boot_kobj->attr_group);
+	kobject_put(&boot_kobj->kobj);
+}
+
+/**
+ * iscsi_boot_create_target() - create boot target sysfs dir
+ * @boot_kset: boot kset
+ * @index: the target id
+ * @data: driver specific data for target
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the target kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
+			 void *data,
+			 ssize_t (*show) (void *data, int type, char *buf),
+			 mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset, &iscsi_boot_target_attr_group,
+				      "target%d", index, data, show, is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_target);
+
+/**
+ * iscsi_boot_create_initiator() - create boot initiator sysfs dir
+ * @boot_kset: boot kset
+ * @index: the initiator id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the initiator kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
+			    void *data,
+			    ssize_t (*show) (void *data, int type, char *buf),
+			    mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset,
+				      &iscsi_boot_initiator_attr_group,
+				      "initiator", index, data, show,
+				      is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_initiator);
+
+/**
+ * iscsi_boot_create_ethernet() - create boot ethernet sysfs dir
+ * @boot_kset: boot kset
+ * @index: the ethernet device id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the ethernet kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
+			   void *data,
+			   ssize_t (*show) (void *data, int type, char *buf),
+			   mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset,
+				      &iscsi_boot_ethernet_attr_group,
+				      "ethernet%d", index, data, show,
+				      is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_ethernet);
+
+/**
+ * iscsi_boot_create_kset() - creates root sysfs tree
+ * @set_name: name of root dir
+ */
+struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name)
+{
+	struct iscsi_boot_kset *boot_kset;
+
+	boot_kset = kzalloc(sizeof(*boot_kset), GFP_KERNEL);
+	if (!boot_kset)
+		return NULL;
+
+	boot_kset->kset = kset_create_and_add(set_name, NULL, firmware_kobj);
+	if (!boot_kset->kset) {
+		kfree(boot_kset);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&boot_kset->kobj_list);
+	return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_kset);
+
+/**
+ * iscsi_boot_create_host_kset() - creates root sysfs tree for a scsi host
+ * @hostno: host number of scsi host
+ */
+struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno)
+{
+	struct iscsi_boot_kset *boot_kset;
+	char *set_name;
+
+	set_name = kasprintf(GFP_KERNEL, "iscsi_boot%u", hostno);
+	if (!set_name)
+		return NULL;
+
+	boot_kset = iscsi_boot_create_kset(set_name);
+	kfree(set_name);
+	return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_host_kset);
+
+/**
+ * iscsi_boot_destroy_kset() - destroy kset and kobjects under it
+ * @boot_kset: boot kset
+ *
+ * This will remove the kset and kobjects and attrs under it.
+ */
+void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset)
+{
+	struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+
+	list_for_each_entry_safe(boot_kobj, tmp_kobj,
+				 &boot_kset->kobj_list, list)
+		iscsi_boot_remove_kobj(boot_kobj);
+
+	kset_unregister(boot_kset->kset);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_destroy_kset);
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index ed2801c378d..4f04ec0410a 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright 2007 Red Hat, Inc.
+ *  Copyright 2007-2010 Red Hat, Inc.
  *  by Peter Jones <pjones@redhat.com>
  *  Copyright 2008 IBM, Inc.
  *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
@@ -19,6 +19,9 @@
  *
  * Changelog:
  *
+ *  06 Jan 2010 - Peter Jones <pjones@redhat.com>
+ *    New changelog entries are in the git log from now on.  Not here.
+ *
  *  14 Mar 2008 - Konrad Rzeszutek <ketuzsezr@darnok.org>
  *    Updated comments and copyrights. (v0.4.9)
  *
@@ -78,9 +81,11 @@
 #include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_boot_sysfs.h>
 
-#define IBFT_ISCSI_VERSION "0.4.9"
-#define IBFT_ISCSI_DATE "2008-Mar-14"
+#define IBFT_ISCSI_VERSION "0.5.0"
+#define IBFT_ISCSI_DATE "2010-Feb-25"
 
 MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and \
 Konrad Rzeszutek <ketuzsezr@darnok.org>");
@@ -166,108 +171,20 @@ enum ibft_id {
 };
 
 /*
- * We do not support the other types, hence the usage of NULL.
- * This maps to the enum ibft_id.
- */
-static const char *ibft_id_names[] =
-	{NULL, NULL, "initiator", "ethernet%d", "target%d", NULL, NULL};
-
-/*
- * The text attributes names for each of the kobjects.
-*/
-enum ibft_eth_properties_enum {
-	ibft_eth_index,
-	ibft_eth_flags,
-	ibft_eth_ip_addr,
-	ibft_eth_subnet_mask,
-	ibft_eth_origin,
-	ibft_eth_gateway,
-	ibft_eth_primary_dns,
-	ibft_eth_secondary_dns,
-	ibft_eth_dhcp,
-	ibft_eth_vlan,
-	ibft_eth_mac,
-	/* ibft_eth_pci_bdf - this is replaced by link to the device itself. */
-	ibft_eth_hostname,
-	ibft_eth_end_marker,
-};
-
-static const char *ibft_eth_properties[] =
-	{"index", "flags", "ip-addr", "subnet-mask", "origin", "gateway",
-	"primary-dns", "secondary-dns", "dhcp", "vlan", "mac", "hostname",
-	NULL};
-
-enum ibft_tgt_properties_enum {
-	ibft_tgt_index,
-	ibft_tgt_flags,
-	ibft_tgt_ip_addr,
-	ibft_tgt_port,
-	ibft_tgt_lun,
-	ibft_tgt_chap_type,
-	ibft_tgt_nic_assoc,
-	ibft_tgt_name,
-	ibft_tgt_chap_name,
-	ibft_tgt_chap_secret,
-	ibft_tgt_rev_chap_name,
-	ibft_tgt_rev_chap_secret,
-	ibft_tgt_end_marker,
-};
-
-static const char *ibft_tgt_properties[] =
-	{"index", "flags", "ip-addr", "port", "lun", "chap-type", "nic-assoc",
-	"target-name", "chap-name", "chap-secret", "rev-chap-name",
-	"rev-chap-name-secret", NULL};
-
-enum ibft_initiator_properties_enum {
-	ibft_init_index,
-	ibft_init_flags,
-	ibft_init_isns_server,
-	ibft_init_slp_server,
-	ibft_init_pri_radius_server,
-	ibft_init_sec_radius_server,
-	ibft_init_initiator_name,
-	ibft_init_end_marker,
-};
-
-static const char *ibft_initiator_properties[] =
-	{"index", "flags", "isns-server", "slp-server", "pri-radius-server",
-	"sec-radius-server", "initiator-name", NULL};
-
-/*
  * The kobject and attribute structures.
  */
 
 struct ibft_kobject {
-	struct ibft_table_header *header;
+	struct acpi_table_ibft *header;
 	union {
 		struct ibft_initiator *initiator;
 		struct ibft_nic *nic;
 		struct ibft_tgt *tgt;
 		struct ibft_hdr *hdr;
 	};
-	struct kobject kobj;
-	struct list_head node;
 };
 
-struct ibft_attribute {
-	struct attribute attr;
-	ssize_t (*show) (struct  ibft_kobject *entry,
-			 struct ibft_attribute *attr, char *buf);
-	union {
-		struct ibft_initiator *initiator;
-		struct ibft_nic *nic;
-		struct ibft_tgt *tgt;
-		struct ibft_hdr *hdr;
-	};
-	struct kobject *kobj;
-	int type; /* The enum of the type. This can be any value of:
-		ibft_eth_properties_enum, ibft_tgt_properties_enum,
-		or ibft_initiator_properties_enum. */
-	struct list_head node;
-};
-
-static LIST_HEAD(ibft_attr_list);
-static LIST_HEAD(ibft_kobject_list);
+static struct iscsi_boot_kset *boot_kset;
 
 static const char nulls[16];
 
@@ -306,35 +223,27 @@ static ssize_t sprintf_string(char *str, int len, char *buf)
 static int ibft_verify_hdr(char *t, struct ibft_hdr *hdr, int id, int length)
 {
 	if (hdr->id != id) {
-		printk(KERN_ERR "iBFT error: We expected the " \
+		printk(KERN_ERR "iBFT error: We expected the %s " \
 				"field header.id to have %d but " \
-				"found %d instead!\n", id, hdr->id);
+				"found %d instead!\n", t, id, hdr->id);
 		return -ENODEV;
 	}
 	if (hdr->length != length) {
-		printk(KERN_ERR "iBFT error: We expected the " \
+		printk(KERN_ERR "iBFT error: We expected the %s " \
 				"field header.length to have %d but " \
-				"found %d instead!\n", length, hdr->length);
+				"found %d instead!\n", t, length, hdr->length);
 		return -ENODEV;
 	}
 
 	return 0;
 }
 
-static void ibft_release(struct kobject *kobj)
-{
-	struct ibft_kobject *ibft =
-		container_of(kobj, struct ibft_kobject, kobj);
-	kfree(ibft);
-}
-
 /*
  *  Routines for parsing the iBFT data to be human readable.
  */
-static ssize_t ibft_attr_show_initiator(struct ibft_kobject *entry,
-					struct ibft_attribute *attr,
-					char *buf)
+static ssize_t ibft_attr_show_initiator(void *data, int type, char *buf)
 {
+	struct ibft_kobject *entry = data;
 	struct ibft_initiator *initiator = entry->initiator;
 	void *ibft_loc = entry->header;
 	char *str = buf;
@@ -342,26 +251,26 @@ static ssize_t ibft_attr_show_initiator(struct ibft_kobject *entry,
 	if (!initiator)
 		return 0;
 
-	switch (attr->type) {
-	case ibft_init_index:
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
 		str += sprintf(str, "%d\n", initiator->hdr.index);
 		break;
-	case ibft_init_flags:
+	case ISCSI_BOOT_INI_FLAGS:
 		str += sprintf(str, "%d\n", initiator->hdr.flags);
 		break;
-	case ibft_init_isns_server:
+	case ISCSI_BOOT_INI_ISNS_SERVER:
 		str += sprintf_ipaddr(str, initiator->isns_server);
 		break;
-	case ibft_init_slp_server:
+	case ISCSI_BOOT_INI_SLP_SERVER:
 		str += sprintf_ipaddr(str, initiator->slp_server);
 		break;
-	case ibft_init_pri_radius_server:
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
 		str += sprintf_ipaddr(str, initiator->pri_radius_server);
 		break;
-	case ibft_init_sec_radius_server:
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
 		str += sprintf_ipaddr(str, initiator->sec_radius_server);
 		break;
-	case ibft_init_initiator_name:
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
 		str += sprintf_string(str, initiator->initiator_name_len,
 				      (char *)ibft_loc +
 				      initiator->initiator_name_off);
@@ -373,10 +282,9 @@ static ssize_t ibft_attr_show_initiator(struct ibft_kobject *entry,
 	return str - buf;
 }
 
-static ssize_t ibft_attr_show_nic(struct ibft_kobject *entry,
-				  struct ibft_attribute *attr,
-				  char *buf)
+static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
 {
+	struct ibft_kobject *entry = data;
 	struct ibft_nic *nic = entry->nic;
 	void *ibft_loc = entry->header;
 	char *str = buf;
@@ -385,42 +293,42 @@ static ssize_t ibft_attr_show_nic(struct ibft_kobject *entry,
 	if (!nic)
 		return 0;
 
-	switch (attr->type) {
-	case ibft_eth_index:
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
 		str += sprintf(str, "%d\n", nic->hdr.index);
 		break;
-	case ibft_eth_flags:
+	case ISCSI_BOOT_ETH_FLAGS:
 		str += sprintf(str, "%d\n", nic->hdr.flags);
 		break;
-	case ibft_eth_ip_addr:
+	case ISCSI_BOOT_ETH_IP_ADDR:
 		str += sprintf_ipaddr(str, nic->ip_addr);
 		break;
-	case ibft_eth_subnet_mask:
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
 		val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
 		str += sprintf(str, "%pI4", &val);
 		break;
-	case ibft_eth_origin:
+	case ISCSI_BOOT_ETH_ORIGIN:
 		str += sprintf(str, "%d\n", nic->origin);
 		break;
-	case ibft_eth_gateway:
+	case ISCSI_BOOT_ETH_GATEWAY:
 		str += sprintf_ipaddr(str, nic->gateway);
 		break;
-	case ibft_eth_primary_dns:
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
 		str += sprintf_ipaddr(str, nic->primary_dns);
 		break;
-	case ibft_eth_secondary_dns:
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
 		str += sprintf_ipaddr(str, nic->secondary_dns);
 		break;
-	case ibft_eth_dhcp:
+	case ISCSI_BOOT_ETH_DHCP:
 		str += sprintf_ipaddr(str, nic->dhcp);
 		break;
-	case ibft_eth_vlan:
+	case ISCSI_BOOT_ETH_VLAN:
 		str += sprintf(str, "%d\n", nic->vlan);
 		break;
-	case ibft_eth_mac:
+	case ISCSI_BOOT_ETH_MAC:
 		str += sprintf(str, "%pM\n", nic->mac);
 		break;
-	case ibft_eth_hostname:
+	case ISCSI_BOOT_ETH_HOSTNAME:
 		str += sprintf_string(str, nic->hostname_len,
 				      (char *)ibft_loc + nic->hostname_off);
 		break;
@@ -431,10 +339,9 @@ static ssize_t ibft_attr_show_nic(struct ibft_kobject *entry,
 	return str - buf;
 };
 
-static ssize_t ibft_attr_show_target(struct ibft_kobject *entry,
-				     struct ibft_attribute *attr,
-				     char *buf)
+static ssize_t ibft_attr_show_target(void *data, int type, char *buf)
 {
+	struct ibft_kobject *entry = data;
 	struct ibft_tgt *tgt = entry->tgt;
 	void *ibft_loc = entry->header;
 	char *str = buf;
@@ -443,48 +350,48 @@ static ssize_t ibft_attr_show_target(struct ibft_kobject *entry,
 	if (!tgt)
 		return 0;
 
-	switch (attr->type) {
-	case ibft_tgt_index:
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
 		str += sprintf(str, "%d\n", tgt->hdr.index);
 		break;
-	case ibft_tgt_flags:
+	case ISCSI_BOOT_TGT_FLAGS:
 		str += sprintf(str, "%d\n", tgt->hdr.flags);
 		break;
-	case ibft_tgt_ip_addr:
+	case ISCSI_BOOT_TGT_IP_ADDR:
 		str += sprintf_ipaddr(str, tgt->ip_addr);
 		break;
-	case ibft_tgt_port:
+	case ISCSI_BOOT_TGT_PORT:
 		str += sprintf(str, "%d\n", tgt->port);
 		break;
-	case ibft_tgt_lun:
+	case ISCSI_BOOT_TGT_LUN:
 		for (i = 0; i < 8; i++)
 			str += sprintf(str, "%x", (u8)tgt->lun[i]);
 		str += sprintf(str, "\n");
 		break;
-	case ibft_tgt_nic_assoc:
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
 		str += sprintf(str, "%d\n", tgt->nic_assoc);
 		break;
-	case ibft_tgt_chap_type:
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
 		str += sprintf(str, "%d\n", tgt->chap_type);
 		break;
-	case ibft_tgt_name:
+	case ISCSI_BOOT_TGT_NAME:
 		str += sprintf_string(str, tgt->tgt_name_len,
 				      (char *)ibft_loc + tgt->tgt_name_off);
 		break;
-	case ibft_tgt_chap_name:
+	case ISCSI_BOOT_TGT_CHAP_NAME:
 		str += sprintf_string(str, tgt->chap_name_len,
 				      (char *)ibft_loc + tgt->chap_name_off);
 		break;
-	case ibft_tgt_chap_secret:
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
 		str += sprintf_string(str, tgt->chap_secret_len,
 				      (char *)ibft_loc + tgt->chap_secret_off);
 		break;
-	case ibft_tgt_rev_chap_name:
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
 		str += sprintf_string(str, tgt->rev_chap_name_len,
 				      (char *)ibft_loc +
 				      tgt->rev_chap_name_off);
 		break;
-	case ibft_tgt_rev_chap_secret:
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
 		str += sprintf_string(str, tgt->rev_chap_secret_len,
 				      (char *)ibft_loc +
 				      tgt->rev_chap_secret_off);
@@ -496,52 +403,19 @@ static ssize_t ibft_attr_show_target(struct ibft_kobject *entry,
 	return str - buf;
 }
 
-/*
- * The routine called for all sysfs attributes.
- */
-static ssize_t ibft_show_attribute(struct kobject *kobj,
-				    struct attribute *attr,
-				    char *buf)
-{
-	struct ibft_kobject *dev =
-		container_of(kobj, struct ibft_kobject, kobj);
-	struct ibft_attribute *ibft_attr =
-		container_of(attr, struct ibft_attribute, attr);
-	ssize_t ret = -EIO;
-	char *str = buf;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-
-	if (ibft_attr->show)
-		ret = ibft_attr->show(dev, ibft_attr, str);
-
-	return ret;
-}
-
-static const struct sysfs_ops ibft_attr_ops = {
-	.show = ibft_show_attribute,
-};
-
-static struct kobj_type ibft_ktype = {
-	.release = ibft_release,
-	.sysfs_ops = &ibft_attr_ops,
-};
-
-static struct kset *ibft_kset;
-
 static int __init ibft_check_device(void)
 {
 	int len;
 	u8 *pos;
 	u8 csum = 0;
 
-	len = ibft_addr->length;
+	len = ibft_addr->header.length;
 
 	/* Sanity checking of iBFT. */
-	if (ibft_addr->revision != 1) {
+	if (ibft_addr->header.revision != 1) {
 		printk(KERN_ERR "iBFT module supports only revision 1, " \
-				"while this is %d.\n", ibft_addr->revision);
+				"while this is %d.\n",
+				ibft_addr->header.revision);
 		return -ENOENT;
 	}
 	for (pos = (u8 *)ibft_addr; pos < (u8 *)ibft_addr + len; pos++)
@@ -556,12 +430,149 @@ static int __init ibft_check_device(void)
 }
 
 /*
+ * Helper routiners to check to determine if the entry is valid
+ * in the proper iBFT structure.
+ */
+static mode_t ibft_check_nic_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_nic *nic = entry->nic;
+	mode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
+	case ISCSI_BOOT_ETH_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_IP_ADDR:
+		if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
+		if (nic->subnet_mask_prefix)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_ORIGIN:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_GATEWAY:
+		if (memcmp(nic->gateway, nulls, sizeof(nic->gateway)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
+		if (memcmp(nic->primary_dns, nulls,
+			   sizeof(nic->primary_dns)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
+		if (memcmp(nic->secondary_dns, nulls,
+			   sizeof(nic->secondary_dns)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_DHCP:
+		if (memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_VLAN:
+	case ISCSI_BOOT_ETH_MAC:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_HOSTNAME:
+		if (nic->hostname_off)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static mode_t __init ibft_check_tgt_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_tgt *tgt = entry->tgt;
+	mode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
+	case ISCSI_BOOT_TGT_FLAGS:
+	case ISCSI_BOOT_TGT_IP_ADDR:
+	case ISCSI_BOOT_TGT_PORT:
+	case ISCSI_BOOT_TGT_LUN:
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
+		rc = S_IRUGO;
+	case ISCSI_BOOT_TGT_NAME:
+		if (tgt->tgt_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		if (tgt->chap_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+		if (tgt->rev_chap_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static mode_t __init ibft_check_initiator_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_initiator *init = entry->initiator;
+	mode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
+	case ISCSI_BOOT_INI_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_ISNS_SERVER:
+		if (memcmp(init->isns_server, nulls,
+			   sizeof(init->isns_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SLP_SERVER:
+		if (memcmp(init->slp_server, nulls,
+			   sizeof(init->slp_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
+		if (memcmp(init->pri_radius_server, nulls,
+			   sizeof(init->pri_radius_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
+		if (memcmp(init->sec_radius_server, nulls,
+			   sizeof(init->sec_radius_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		if (init->initiator_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+/*
  * Helper function for ibft_register_kobjects.
  */
-static int __init ibft_create_kobject(struct ibft_table_header *header,
-				       struct ibft_hdr *hdr,
-				       struct list_head *list)
+static int __init ibft_create_kobject(struct acpi_table_ibft *header,
+				      struct ibft_hdr *hdr)
 {
+	struct iscsi_boot_kobj *boot_kobj = NULL;
 	struct ibft_kobject *ibft_kobj = NULL;
 	struct ibft_nic *nic = (struct ibft_nic *)hdr;
 	struct pci_dev *pci_dev;
@@ -578,14 +589,47 @@ static int __init ibft_create_kobject(struct ibft_table_header *header,
 	case id_initiator:
 		rc = ibft_verify_hdr("initiator", hdr, id_initiator,
 				     sizeof(*ibft_kobj->initiator));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_initiator(boot_kset, hdr->index,
+						ibft_kobj,
+						ibft_attr_show_initiator,
+						ibft_check_initiator_for);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
 		break;
 	case id_nic:
 		rc = ibft_verify_hdr("ethernet", hdr, id_nic,
 				     sizeof(*ibft_kobj->nic));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_ethernet(boot_kset, hdr->index,
+						       ibft_kobj,
+						       ibft_attr_show_nic,
+						       ibft_check_nic_for);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
 		break;
 	case id_target:
 		rc = ibft_verify_hdr("target", hdr, id_target,
 				     sizeof(*ibft_kobj->tgt));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_target(boot_kset, hdr->index,
+						     ibft_kobj,
+						     ibft_attr_show_target,
+						     ibft_check_tgt_for);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
 		break;
 	case id_reserved:
 	case id_control:
@@ -596,29 +640,17 @@ static int __init ibft_create_kobject(struct ibft_table_header *header,
 	default:
 		printk(KERN_ERR "iBFT has unknown structure type (%d). " \
 				"Report this bug to %.6s!\n", hdr->id,
-				header->oem_id);
+				header->header.oem_id);
 		rc = 1;
 		break;
 	}
 
 	if (rc) {
 		/* Skip adding this kobject, but exit with non-fatal error. */
-		kfree(ibft_kobj);
-		goto out_invalid_struct;
+		rc = 0;
+		goto free_ibft_obj;
 	}
 
-	ibft_kobj->kobj.kset = ibft_kset;
-
-	rc = kobject_init_and_add(&ibft_kobj->kobj, &ibft_ktype,
-				  NULL, ibft_id_names[hdr->id], hdr->index);
-
-	if (rc) {
-		kfree(ibft_kobj);
-		goto out;
-	}
-
-	kobject_uevent(&ibft_kobj->kobj, KOBJ_ADD);
-
 	if (hdr->id == id_nic) {
 		/*
 		* We don't search for the device in other domains than
@@ -629,19 +661,16 @@ static int __init ibft_create_kobject(struct ibft_table_header *header,
 		pci_dev = pci_get_bus_and_slot((nic->pci_bdf & 0xff00) >> 8,
 					       (nic->pci_bdf & 0xff));
 		if (pci_dev) {
-			rc = sysfs_create_link(&ibft_kobj->kobj,
+			rc = sysfs_create_link(&boot_kobj->kobj,
 					       &pci_dev->dev.kobj, "device");
 			pci_dev_put(pci_dev);
 		}
 	}
+	return 0;
 
-	/* Nothing broke so lets add it to the list. */
-	list_add_tail(&ibft_kobj->node, list);
-out:
+free_ibft_obj:
+	kfree(ibft_kobj);
 	return rc;
-out_invalid_struct:
-	/* Unsupported structs are skipped. */
-	return 0;
 }
 
 /*
@@ -649,8 +678,7 @@ out_invalid_struct:
  * found add them on the passed-in list. We do not support the other
  * fields at this point, so they are skipped.
  */
-static int __init ibft_register_kobjects(struct ibft_table_header *header,
-					  struct list_head *list)
+static int __init ibft_register_kobjects(struct acpi_table_ibft *header)
 {
 	struct ibft_control *control = NULL;
 	void *ptr, *end;
@@ -660,7 +688,7 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 
 	control = (void *)header + sizeof(*header);
 	end = (void *)control + control->hdr.length;
-	eot_offset = (void *)header + header->length - (void *)control;
+	eot_offset = (void *)header + header->header.length - (void *)control;
 	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
 			     sizeof(*control));
 
@@ -672,10 +700,10 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 	}
 	for (ptr = &control->initiator_off; ptr < end; ptr += sizeof(u16)) {
 		offset = *(u16 *)ptr;
-		if (offset && offset < header->length && offset < eot_offset) {
+		if (offset && offset < header->header.length &&
+						offset < eot_offset) {
 			rc = ibft_create_kobject(header,
-						 (void *)header + offset,
-						 list);
+						 (void *)header + offset);
 			if (rc)
 				break;
 		}
@@ -684,240 +712,28 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 	return rc;
 }
 
-static void ibft_unregister(struct list_head *attr_list,
-			     struct list_head *kobj_list)
+static void ibft_unregister(void)
 {
-	struct ibft_kobject *data = NULL, *n;
-	struct ibft_attribute *attr = NULL, *m;
-
-	list_for_each_entry_safe(attr, m, attr_list, node) {
-		sysfs_remove_file(attr->kobj, &attr->attr);
-		list_del(&attr->node);
-		kfree(attr);
+	struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+	struct ibft_kobject *ibft_kobj;
+
+	list_for_each_entry_safe(boot_kobj, tmp_kobj,
+				 &boot_kset->kobj_list, list) {
+		ibft_kobj = boot_kobj->data;
+		if (ibft_kobj->hdr->id == id_nic)
+			sysfs_remove_link(&boot_kobj->kobj, "device");
 	};
-	list_del_init(attr_list);
-
-	list_for_each_entry_safe(data, n, kobj_list, node) {
-		list_del(&data->node);
-		if (data->hdr->id == id_nic)
-			sysfs_remove_link(&data->kobj, "device");
-		kobject_put(&data->kobj);
-	};
-	list_del_init(kobj_list);
 }
 
-static int __init ibft_create_attribute(struct ibft_kobject *kobj_data,
-					 int type,
-					 const char *name,
-					 ssize_t (*show)(struct ibft_kobject *,
-							 struct ibft_attribute*,
-							 char *buf),
-					 struct list_head *list)
+static void ibft_cleanup(void)
 {
-	struct ibft_attribute *attr = NULL;
-	struct ibft_hdr *hdr = kobj_data->hdr;
-
-	attr = kmalloc(sizeof(*attr), GFP_KERNEL);
-	if (!attr)
-		return -ENOMEM;
-
-	attr->attr.name = name;
-	attr->attr.mode = S_IRUSR;
-
-	attr->hdr = hdr;
-	attr->show = show;
-	attr->kobj = &kobj_data->kobj;
-	attr->type = type;
-
-	list_add_tail(&attr->node, list);
-
-	return 0;
-}
-
-/*
- * Helper routiners to check to determine if the entry is valid
- * in the proper iBFT structure.
- */
-static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry)
-{
-	int rc = 0;
-
-	switch (entry) {
-	case ibft_eth_index:
-	case ibft_eth_flags:
-		rc = 1;
-		break;
-	case ibft_eth_ip_addr:
-		if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
-			rc = 1;
-		break;
-	case ibft_eth_subnet_mask:
-		if (nic->subnet_mask_prefix)
-			rc = 1;
-		break;
-	case ibft_eth_origin:
-		rc = 1;
-		break;
-	case ibft_eth_gateway:
-		if (memcmp(nic->gateway, nulls, sizeof(nic->gateway)))
-			rc = 1;
-		break;
-	case ibft_eth_primary_dns:
-		if (memcmp(nic->primary_dns, nulls,
-			   sizeof(nic->primary_dns)))
-			rc = 1;
-		break;
-	case ibft_eth_secondary_dns:
-		if (memcmp(nic->secondary_dns, nulls,
-			   sizeof(nic->secondary_dns)))
-			rc = 1;
-		break;
-	case ibft_eth_dhcp:
-		if (memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
-			rc = 1;
-		break;
-	case ibft_eth_vlan:
-	case ibft_eth_mac:
-		rc = 1;
-		break;
-	case ibft_eth_hostname:
-		if (nic->hostname_off)
-			rc = 1;
-		break;
-	default:
-		break;
-	}
-
-	return rc;
+	ibft_unregister();
+	iscsi_boot_destroy_kset(boot_kset);
 }
 
-static int __init ibft_check_tgt_for(struct ibft_tgt *tgt, int entry)
-{
-	int rc = 0;
-
-	switch (entry) {
-	case ibft_tgt_index:
-	case ibft_tgt_flags:
-	case ibft_tgt_ip_addr:
-	case ibft_tgt_port:
-	case ibft_tgt_lun:
-	case ibft_tgt_nic_assoc:
-	case ibft_tgt_chap_type:
-		rc = 1;
-	case ibft_tgt_name:
-		if (tgt->tgt_name_len)
-			rc = 1;
-		break;
-	case ibft_tgt_chap_name:
-	case ibft_tgt_chap_secret:
-		if (tgt->chap_name_len)
-			rc = 1;
-		break;
-	case ibft_tgt_rev_chap_name:
-	case ibft_tgt_rev_chap_secret:
-		if (tgt->rev_chap_name_len)
-			rc = 1;
-		break;
-	default:
-		break;
-	}
-
-	return rc;
-}
-
-static int __init ibft_check_initiator_for(struct ibft_initiator *init,
-					    int entry)
-{
-	int rc = 0;
-
-	switch (entry) {
-	case ibft_init_index:
-	case ibft_init_flags:
-		rc = 1;
-		break;
-	case ibft_init_isns_server:
-		if (memcmp(init->isns_server, nulls,
-			   sizeof(init->isns_server)))
-			rc = 1;
-		break;
-	case ibft_init_slp_server:
-		if (memcmp(init->slp_server, nulls,
-			   sizeof(init->slp_server)))
-			rc = 1;
-		break;
-	case ibft_init_pri_radius_server:
-		if (memcmp(init->pri_radius_server, nulls,
-			   sizeof(init->pri_radius_server)))
-			rc = 1;
-		break;
-	case ibft_init_sec_radius_server:
-		if (memcmp(init->sec_radius_server, nulls,
-			   sizeof(init->sec_radius_server)))
-			rc = 1;
-		break;
-	case ibft_init_initiator_name:
-		if (init->initiator_name_len)
-			rc = 1;
-		break;
-	default:
-		break;
-	}
-
-	return rc;
-}
-
-/*
- *  Register the attributes for all of the kobjects.
- */
-static int __init ibft_register_attributes(struct list_head *kobject_list,
-					    struct list_head *attr_list)
+static void __exit ibft_exit(void)
 {
-	int rc = 0, i = 0;
-	struct ibft_kobject *data = NULL;
-	struct ibft_attribute *attr = NULL, *m;
-
-	list_for_each_entry(data, kobject_list, node) {
-		switch (data->hdr->id) {
-		case id_nic:
-			for (i = 0; i < ibft_eth_end_marker && !rc; i++)
-				if (ibft_check_nic_for(data->nic, i))
-					rc = ibft_create_attribute(data, i,
-						ibft_eth_properties[i],
-						ibft_attr_show_nic, attr_list);
-			break;
-		case id_target:
-			for (i = 0; i < ibft_tgt_end_marker && !rc; i++)
-				if (ibft_check_tgt_for(data->tgt, i))
-					rc = ibft_create_attribute(data, i,
-						ibft_tgt_properties[i],
-						ibft_attr_show_target,
-						attr_list);
-			break;
-		case id_initiator:
-			for (i = 0; i < ibft_init_end_marker && !rc; i++)
-				if (ibft_check_initiator_for(
-					data->initiator, i))
-					rc = ibft_create_attribute(data, i,
-						ibft_initiator_properties[i],
-						ibft_attr_show_initiator,
-						attr_list);
-			break;
-		default:
-			break;
-		}
-		if (rc)
-			break;
-	}
-	list_for_each_entry_safe(attr, m, attr_list, node) {
-		rc = sysfs_create_file(attr->kobj, &attr->attr);
-		if (rc) {
-			list_del(&attr->node);
-			kfree(attr);
-			break;
-		}
-	}
-
-	return rc;
+	ibft_cleanup();
 }
 
 /*
@@ -927,26 +743,20 @@ static int __init ibft_init(void)
 {
 	int rc = 0;
 
-	ibft_kset = kset_create_and_add("ibft", NULL, firmware_kobj);
-	if (!ibft_kset)
-		return -ENOMEM;
-
 	if (ibft_addr) {
 		printk(KERN_INFO "iBFT detected at 0x%llx.\n",
 		       (u64)isa_virt_to_bus(ibft_addr));
 
 		rc = ibft_check_device();
 		if (rc)
-			goto out_firmware_unregister;
+			return rc;
 
-		/* Scan the IBFT for data and register the kobjects. */
-		rc = ibft_register_kobjects(ibft_addr, &ibft_kobject_list);
-		if (rc)
-			goto out_free;
+		boot_kset = iscsi_boot_create_kset("ibft");
+		if (!boot_kset)
+			return -ENOMEM;
 
-		/* Register the attributes */
-		rc = ibft_register_attributes(&ibft_kobject_list,
-					      &ibft_attr_list);
+		/* Scan the IBFT for data and register the kobjects. */
+		rc = ibft_register_kobjects(ibft_addr);
 		if (rc)
 			goto out_free;
 	} else
@@ -955,17 +765,9 @@ static int __init ibft_init(void)
 	return 0;
 
 out_free:
-	ibft_unregister(&ibft_attr_list, &ibft_kobject_list);
-out_firmware_unregister:
-	kset_unregister(ibft_kset);
+	ibft_cleanup();
 	return rc;
 }
 
-static void __exit ibft_exit(void)
-{
-	ibft_unregister(&ibft_attr_list, &ibft_kobject_list);
-	kset_unregister(ibft_kset);
-}
-
 module_init(ibft_init);
 module_exit(ibft_exit);
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index d6470ef36e4..2192456dfd6 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright 2007 Red Hat, Inc.
+ *  Copyright 2007-2010 Red Hat, Inc.
  *  by Peter Jones <pjones@redhat.com>
  *  Copyright 2007 IBM, Inc.
  *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
@@ -22,6 +22,7 @@
 #include <linux/blkdev.h>
 #include <linux/ctype.h>
 #include <linux/device.h>
+#include <linux/efi.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/limits.h>
@@ -30,13 +31,15 @@
 #include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_ibft.h>
 
 #include <asm/mmzone.h>
 
 /*
  * Physical location of iSCSI Boot Format Table.
  */
-struct ibft_table_header *ibft_addr;
+struct acpi_table_ibft *ibft_addr;
 EXPORT_SYMBOL_GPL(ibft_addr);
 
 #define IBFT_SIGN "iBFT"
@@ -46,19 +49,20 @@ EXPORT_SYMBOL_GPL(ibft_addr);
 #define VGA_MEM 0xA0000 /* VGA buffer */
 #define VGA_SIZE 0x20000 /* 128kB */
 
+#ifdef CONFIG_ACPI
+static int __init acpi_find_ibft(struct acpi_table_header *header)
+{
+	ibft_addr = (struct acpi_table_ibft *)header;
+	return 0;
+}
+#endif /* CONFIG_ACPI */
 
-/*
- * Routine used to find the iSCSI Boot Format Table. The logical
- * kernel address is set in the ibft_addr global variable.
- */
-unsigned long __init find_ibft_region(unsigned long *sizep)
+static int __init find_ibft_in_mem(void)
 {
 	unsigned long pos;
 	unsigned int len = 0;
 	void *virt;
 
-	ibft_addr = NULL;
-
 	for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
 		/* The table can't be inside the VGA BIOS reserved space,
 		 * so skip that area */
@@ -72,14 +76,42 @@ unsigned long __init find_ibft_region(unsigned long *sizep)
 			/* if the length of the table extends past 1M,
 			 * the table cannot be valid. */
 			if (pos + len <= (IBFT_END-1)) {
-				ibft_addr = (struct ibft_table_header *)virt;
+				ibft_addr = (struct acpi_table_ibft *)virt;
 				break;
 			}
 		}
 	}
+	return len;
+}
+/*
+ * Routine used to find the iSCSI Boot Format Table. The logical
+ * kernel address is set in the ibft_addr global variable.
+ */
+unsigned long __init find_ibft_region(unsigned long *sizep)
+{
+
+	ibft_addr = NULL;
+
+#ifdef CONFIG_ACPI
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	if (!ibft_addr)
+		acpi_table_parse(ACPI_SIG_IBFT, acpi_find_ibft);
+	if (!ibft_addr)
+		acpi_table_parse(IBFT_SIGN, acpi_find_ibft);
+#endif /* CONFIG_ACPI */
+
+	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
+	 * only use ACPI for this */
+
+	if (!ibft_addr && !efi_enabled)
+		find_ibft_in_mem();
+
 	if (ibft_addr) {
-		*sizep = PAGE_ALIGN(len);
-		return pos;
+		*sizep = PAGE_ALIGN(ibft_addr->header.length);
+		return (u64)isa_virt_to_bus(ibft_addr);
 	}
 
 	*sizep = 0;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 724038dab4c..7face915b96 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1,5 +1,5 @@
 #
-# GPIO infrastructure and expanders
+# platform-neutral GPIO infrastructure and expanders
 #
 
 config ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 51c3cdd41b5..e53dcff49b4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,4 +1,8 @@
-# gpio support: dedicated expander chips, etc
+# generic gpio support: dedicated expander chips, etc
+#
+# NOTE: platform-specific GPIO drivers don't belong in the
+# drivers/gpio directory; put them with other platform setup
+# code, IRQ controllers, board init, etc.
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index f73a1555e49..e23c06893d1 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -352,6 +352,6 @@ static void __exit cs5535_gpio_exit(void)
 module_init(cs5535_gpio_init);
 module_exit(cs5535_gpio_exit);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3ca36542e33..4e51fe3c1fc 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -893,10 +893,12 @@ EXPORT_SYMBOL_GPL(gpio_sysfs_set_active_low);
 void gpio_unexport(unsigned gpio)
 {
 	struct gpio_desc	*desc;
-	int			status = -EINVAL;
+	int			status = 0;
 
-	if (!gpio_is_valid(gpio))
+	if (!gpio_is_valid(gpio)) {
+		status = -EINVAL;
 		goto done;
+	}
 
 	mutex_lock(&sysfs_lock);
 
@@ -911,7 +913,6 @@ void gpio_unexport(unsigned gpio)
 			clear_bit(FLAG_EXPORT, &desc->flags);
 			put_device(dev);
 			device_unregister(dev);
-			status = 0;
 		} else
 			status = -ENODEV;
 	}
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index ee568c8fcbd..5005990f751 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 	desc->chip->unmask(irq);
 }
 
-static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
+static int pl061_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct pl061_platform_data *pdata;
 	struct pl061_gpio *chip;
@@ -333,7 +333,7 @@ free_mem:
 	return ret;
 }
 
-static struct amba_id pl061_ids[] __initdata = {
+static struct amba_id pl061_ids[] = {
 	{
 		.id	= 0x00041061,
 		.mask	= 0x000fffff,
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 994d23beeb1..57cea01c4ff 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1840,8 +1840,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 
 		ret = copy_from_user(clips, clips_ptr,
 				     num_clips * sizeof(*clips));
-		if (ret)
+		if (ret) {
+			ret = -EFAULT;
 			goto out_err2;
+		}
 	}
 
 	if (fb->funcs->dirty) {
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 76440195104..9b2a54117c9 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -860,19 +860,24 @@ static void output_poll_execute(struct slow_work *work)
 	}
 }
 
-void drm_kms_helper_poll_init(struct drm_device *dev)
+void drm_kms_helper_poll_disable(struct drm_device *dev)
+{
+	if (!dev->mode_config.poll_enabled)
+		return;
+	delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
+}
+EXPORT_SYMBOL(drm_kms_helper_poll_disable);
+
+void drm_kms_helper_poll_enable(struct drm_device *dev)
 {
-	struct drm_connector *connector;
 	bool poll = false;
+	struct drm_connector *connector;
 	int ret;
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (connector->polled)
 			poll = true;
 	}
-	slow_work_register_user(THIS_MODULE);
-	delayed_slow_work_init(&dev->mode_config.output_poll_slow_work,
-			       &output_poll_ops);
 
 	if (poll) {
 		ret = delayed_slow_work_enqueue(&dev->mode_config.output_poll_slow_work, DRM_OUTPUT_POLL_PERIOD);
@@ -880,11 +885,22 @@ void drm_kms_helper_poll_init(struct drm_device *dev)
 			DRM_ERROR("delayed enqueue failed %d\n", ret);
 	}
 }
+EXPORT_SYMBOL(drm_kms_helper_poll_enable);
+
+void drm_kms_helper_poll_init(struct drm_device *dev)
+{
+	slow_work_register_user(THIS_MODULE);
+	delayed_slow_work_init(&dev->mode_config.output_poll_slow_work,
+			       &output_poll_ops);
+	dev->mode_config.poll_enabled = true;
+
+	drm_kms_helper_poll_enable(dev);
+}
 EXPORT_SYMBOL(drm_kms_helper_poll_init);
 
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
+	drm_kms_helper_poll_disable(dev);
 	slow_work_unregister_user(THIS_MODULE);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c1981861bbb..f87bf104df7 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -864,8 +864,8 @@ drm_mode_std(struct drm_connector *connector, struct edid *edid,
 		mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0,
 				    false);
 		mode->hdisplay = 1366;
-		mode->vsync_start = mode->vsync_start - 1;
-		mode->vsync_end = mode->vsync_end - 1;
+		mode->hsync_start = mode->hsync_start - 1;
+		mode->hsync_end = mode->hsync_end - 1;
 		return mode;
 	}
 
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index b3779d243ae..719662034bb 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -146,7 +146,7 @@ static bool drm_fb_helper_connector_parse_command_line(struct drm_fb_helper_conn
 				cvt = 1;
 			break;
 		case 'R':
-			if (!cvt)
+			if (cvt)
 				rb = 1;
 			break;
 		case 'm':
@@ -264,7 +264,7 @@ bool drm_fb_helper_force_kernel_mode(void)
 int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed,
 			void *panic_str)
 {
-	DRM_ERROR("panic occurred, switching back to text console\n");
+	printk(KERN_ERR "panic occurred, switching back to text console\n");
 	return drm_fb_helper_force_kernel_mode();
 	return 0;
 }
@@ -315,8 +315,9 @@ static void drm_fb_helper_on(struct fb_info *info)
 	struct drm_device *dev = fb_helper->dev;
 	struct drm_crtc *crtc;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_connector *connector;
 	struct drm_encoder *encoder;
-	int i;
+	int i, j;
 
 	/*
 	 * For each CRTC in this fb, turn the crtc on then,
@@ -332,7 +333,14 @@ static void drm_fb_helper_on(struct fb_info *info)
 
 		crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
 
-
+		/* Walk the connectors & encoders on this fb turning them on */
+		for (j = 0; j < fb_helper->connector_count; j++) {
+			connector = fb_helper->connector_info[j]->connector;
+			connector->dpms = DRM_MODE_DPMS_ON;
+			drm_connector_property_set_value(connector,
+							 dev->mode_config.dpms_property,
+							 DRM_MODE_DPMS_ON);
+		}
 		/* Found a CRTC on this fb, now find encoders */
 		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 			if (encoder->crtc == crtc) {
@@ -352,8 +360,9 @@ static void drm_fb_helper_off(struct fb_info *info, int dpms_mode)
 	struct drm_device *dev = fb_helper->dev;
 	struct drm_crtc *crtc;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_connector *connector;
 	struct drm_encoder *encoder;
-	int i;
+	int i, j;
 
 	/*
 	 * For each CRTC in this fb, find all associated encoders
@@ -367,6 +376,14 @@ static void drm_fb_helper_off(struct fb_info *info, int dpms_mode)
 		if (!crtc->enabled)
 			continue;
 
+		/* Walk the connectors on this fb and mark them off */
+		for (j = 0; j < fb_helper->connector_count; j++) {
+			connector = fb_helper->connector_info[j]->connector;
+			connector->dpms = dpms_mode;
+			drm_connector_property_set_value(connector,
+							 dev->mode_config.dpms_property,
+							 dpms_mode);
+		}
 		/* Found a CRTC on this fb, now find encoders */
 		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 			if (encoder->crtc == crtc) {
@@ -1024,11 +1041,18 @@ static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_conne
 	}
 
 create_mode:
-	mode = drm_cvt_mode(fb_helper_conn->connector->dev, cmdline_mode->xres,
-			    cmdline_mode->yres,
-			    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
-			    cmdline_mode->rb, cmdline_mode->interlace,
-			    cmdline_mode->margins);
+	if (cmdline_mode->cvt)
+		mode = drm_cvt_mode(fb_helper_conn->connector->dev,
+				    cmdline_mode->xres, cmdline_mode->yres,
+				    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+				    cmdline_mode->rb, cmdline_mode->interlace,
+				    cmdline_mode->margins);
+	else
+		mode = drm_gtf_mode(fb_helper_conn->connector->dev,
+				    cmdline_mode->xres, cmdline_mode->yres,
+				    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+				    cmdline_mode->interlace,
+				    cmdline_mode->margins);
 	drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 	list_add(&mode->head, &fb_helper_conn->connector->modes);
 	return mode;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 95639017bdb..da78f2c0d90 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -22,6 +22,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
 	  intel_fb.o \
 	  intel_tv.o \
 	  intel_dvo.o \
+	  intel_ringbuffer.o \
 	  intel_overlay.o \
 	  dvo_ch7xxx.o \
 	  dvo_ch7017.o \
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 66c697bc9b2..56f66426207 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -208,7 +208,7 @@ static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo)
 	uint8_t ctl2;
 
 	if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
-		if (ctl2 & TFP410_CTL_2_HTPLG)
+		if (ctl2 & TFP410_CTL_2_RSEN)
 			ret = connector_status_connected;
 		else
 			ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 322070c0c63..9214119c015 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -77,7 +77,7 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 	case ACTIVE_LIST:
 		seq_printf(m, "Active:\n");
 		lock = &dev_priv->mm.active_list_lock;
-		head = &dev_priv->mm.active_list;
+		head = &dev_priv->render_ring.active_list;
 		break;
 	case INACTIVE_LIST:
 		seq_printf(m, "Inactive:\n");
@@ -129,7 +129,8 @@ static int i915_gem_request_info(struct seq_file *m, void *data)
 	struct drm_i915_gem_request *gem_request;
 
 	seq_printf(m, "Request:\n");
-	list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) {
+	list_for_each_entry(gem_request, &dev_priv->render_ring.request_list,
+			list) {
 		seq_printf(m, "    %d @ %d\n",
 			   gem_request->seqno,
 			   (int) (jiffies - gem_request->emitted_jiffies));
@@ -143,9 +144,9 @@ static int i915_gem_seqno_info(struct seq_file *m, void *data)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
-	if (dev_priv->hw_status_page != NULL) {
+	if (dev_priv->render_ring.status_page.page_addr != NULL) {
 		seq_printf(m, "Current sequence: %d\n",
-			   i915_get_gem_seqno(dev));
+			   i915_get_gem_seqno(dev,  &dev_priv->render_ring));
 	} else {
 		seq_printf(m, "Current sequence: hws uninitialized\n");
 	}
@@ -195,9 +196,9 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 	}
 	seq_printf(m, "Interrupts received: %d\n",
 		   atomic_read(&dev_priv->irq_received));
-	if (dev_priv->hw_status_page != NULL) {
+	if (dev_priv->render_ring.status_page.page_addr != NULL) {
 		seq_printf(m, "Current sequence:    %d\n",
-			   i915_get_gem_seqno(dev));
+			   i915_get_gem_seqno(dev,  &dev_priv->render_ring));
 	} else {
 		seq_printf(m, "Current sequence:    hws uninitialized\n");
 	}
@@ -251,7 +252,7 @@ static int i915_hws_info(struct seq_file *m, void *data)
 	int i;
 	volatile u32 *hws;
 
-	hws = (volatile u32 *)dev_priv->hw_status_page;
+	hws = (volatile u32 *)dev_priv->render_ring.status_page.page_addr;
 	if (hws == NULL)
 		return 0;
 
@@ -287,7 +288,8 @@ static int i915_batchbuffer_info(struct seq_file *m, void *data)
 
 	spin_lock(&dev_priv->mm.active_list_lock);
 
-	list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+	list_for_each_entry(obj_priv, &dev_priv->render_ring.active_list,
+			list) {
 		obj = &obj_priv->base;
 		if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
 		    ret = i915_gem_object_get_pages(obj, 0);
@@ -317,14 +319,14 @@ static int i915_ringbuffer_data(struct seq_file *m, void *data)
 	u8 *virt;
 	uint32_t *ptr, off;
 
-	if (!dev_priv->ring.ring_obj) {
+	if (!dev_priv->render_ring.gem_object) {
 		seq_printf(m, "No ringbuffer setup\n");
 		return 0;
 	}
 
-	virt = dev_priv->ring.virtual_start;
+	virt = dev_priv->render_ring.virtual_start;
 
-	for (off = 0; off < dev_priv->ring.Size; off += 4) {
+	for (off = 0; off < dev_priv->render_ring.size; off += 4) {
 		ptr = (uint32_t *)(virt + off);
 		seq_printf(m, "%08x :  %08x\n", off, *ptr);
 	}
@@ -344,7 +346,7 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 
 	seq_printf(m, "RingHead :  %08x\n", head);
 	seq_printf(m, "RingTail :  %08x\n", tail);
-	seq_printf(m, "RingSize :  %08lx\n", dev_priv->ring.Size);
+	seq_printf(m, "RingSize :  %08lx\n", dev_priv->render_ring.size);
 	seq_printf(m, "Acthd :     %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
 
 	return 0;
@@ -489,11 +491,14 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u16 rgvswctl = I915_READ16(MEMSWCTL);
+	u16 rgvstat = I915_READ16(MEMSTAT_ILK);
 
-	seq_printf(m, "Last command: 0x%01x\n", (rgvswctl >> 13) & 0x3);
-	seq_printf(m, "Command status: %d\n", (rgvswctl >> 12) & 1);
-	seq_printf(m, "P%d DELAY 0x%02x\n", (rgvswctl >> 8) & 0xf,
-		   rgvswctl & 0x3f);
+	seq_printf(m, "Requested P-state: %d\n", (rgvswctl >> 8) & 0xf);
+	seq_printf(m, "Requested VID: %d\n", rgvswctl & 0x3f);
+	seq_printf(m, "Current VID: %d\n", (rgvstat & MEMSTAT_VID_MASK) >>
+		   MEMSTAT_VID_SHIFT);
+	seq_printf(m, "Current P-state: %d\n",
+		   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
 
 	return 0;
 }
@@ -508,7 +513,8 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused)
 
 	for (i = 0; i < 16; i++) {
 		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
-		seq_printf(m, "P%02dVIDFREQ: 0x%08x\n", i, delayfreq);
+		seq_printf(m, "P%02dVIDFREQ: 0x%08x (VID: %d)\n", i, delayfreq,
+			   (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
 	}
 
 	return 0;
@@ -541,6 +547,8 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 rgvmodectl = I915_READ(MEMMODECTL);
+	u32 rstdbyctl = I915_READ(MCHBAR_RENDER_STANDBY);
+	u16 crstandvid = I915_READ16(CRSTANDVID);
 
 	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
 		   "yes" : "no");
@@ -555,9 +563,13 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 		   rgvmodectl & MEMMODE_RCLK_GATE ? "yes" : "no");
 	seq_printf(m, "Starting frequency: P%d\n",
 		   (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT);
-	seq_printf(m, "Max frequency: P%d\n",
+	seq_printf(m, "Max P-state: P%d\n",
 		   (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT);
-	seq_printf(m, "Min frequency: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+	seq_printf(m, "Min P-state: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+	seq_printf(m, "RS1 VID: %d\n", (crstandvid & 0x3f));
+	seq_printf(m, "RS2 VID: %d\n", ((crstandvid >> 8) & 0x3f));
+	seq_printf(m, "Render standby enabled: %s\n",
+		   (rstdbyctl & RCX_SW_EXIT) ? "no" : "yes");
 
 	return 0;
 }
@@ -593,6 +605,9 @@ static int i915_fbc_status(struct seq_file *m, void *unused)
 		case FBC_NOT_TILED:
 			seq_printf(m, "scanout buffer not tiled");
 			break;
+		case FBC_MULTIPLE_PIPES:
+			seq_printf(m, "multiple pipes are enabled");
+			break;
 		default:
 			seq_printf(m, "unknown reason");
 		}
@@ -608,7 +623,7 @@ static int i915_sr_status(struct seq_file *m, void *unused)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	bool sr_enabled = false;
 
-	if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev))
+	if (IS_I965GM(dev) || IS_I945G(dev) || IS_I945GM(dev))
 		sr_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
 	else if (IS_I915GM(dev))
 		sr_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
@@ -621,6 +636,36 @@ static int i915_sr_status(struct seq_file *m, void *unused)
 	return 0;
 }
 
+static int i915_emon_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	unsigned long temp, chipset, gfx;
+
+	temp = i915_mch_val(dev_priv);
+	chipset = i915_chipset_val(dev_priv);
+	gfx = i915_gfx_val(dev_priv);
+
+	seq_printf(m, "GMCH temp: %ld\n", temp);
+	seq_printf(m, "Chipset power: %ld\n", chipset);
+	seq_printf(m, "GFX power: %ld\n", gfx);
+	seq_printf(m, "Total power: %ld\n", chipset + gfx);
+
+	return 0;
+}
+
+static int i915_gfxec(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
+
+	return 0;
+}
+
 static int
 i915_wedged_open(struct inode *inode,
 		 struct file *filp)
@@ -743,6 +788,8 @@ static struct drm_info_list i915_debugfs_list[] = {
 	{"i915_delayfreq_table", i915_delayfreq_table, 0},
 	{"i915_inttoext_table", i915_inttoext_table, 0},
 	{"i915_drpc_info", i915_drpc_info, 0},
+	{"i915_emon_status", i915_emon_status, 0},
+	{"i915_gfxec", i915_gfxec, 0},
 	{"i915_fbc_status", i915_fbc_status, 0},
 	{"i915_sr_status", i915_sr_status, 0},
 };
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2a6b5de5ae5..2305a1234f1 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -40,84 +40,6 @@
 #include <linux/vga_switcheroo.h>
 #include <linux/slab.h>
 
-/* Really want an OS-independent resettable timer.  Would like to have
- * this loop run for (eg) 3 sec, but have the timer reset every time
- * the head pointer changes, so that EBUSY only happens if the ring
- * actually stalls for (eg) 3 seconds.
- */
-int i915_wait_ring(struct drm_device * dev, int n, const char *caller)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
-	u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD;
-	u32 last_acthd = I915_READ(acthd_reg);
-	u32 acthd;
-	u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-	int i;
-
-	trace_i915_ring_wait_begin (dev);
-
-	for (i = 0; i < 100000; i++) {
-		ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-		acthd = I915_READ(acthd_reg);
-		ring->space = ring->head - (ring->tail + 8);
-		if (ring->space < 0)
-			ring->space += ring->Size;
-		if (ring->space >= n) {
-			trace_i915_ring_wait_end (dev);
-			return 0;
-		}
-
-		if (dev->primary->master) {
-			struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
-			if (master_priv->sarea_priv)
-				master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
-		}
-
-
-		if (ring->head != last_head)
-			i = 0;
-		if (acthd != last_acthd)
-			i = 0;
-
-		last_head = ring->head;
-		last_acthd = acthd;
-		msleep_interruptible(10);
-
-	}
-
-	trace_i915_ring_wait_end (dev);
-	return -EBUSY;
-}
-
-/* As a ringbuffer is only allowed to wrap between instructions, fill
- * the tail with NOOPs.
- */
-int i915_wrap_ring(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	volatile unsigned int *virt;
-	int rem;
-
-	rem = dev_priv->ring.Size - dev_priv->ring.tail;
-	if (dev_priv->ring.space < rem) {
-		int ret = i915_wait_ring(dev, rem, __func__);
-		if (ret)
-			return ret;
-	}
-	dev_priv->ring.space -= rem;
-
-	virt = (unsigned int *)
-		(dev_priv->ring.virtual_start + dev_priv->ring.tail);
-	rem /= 4;
-	while (rem--)
-		*virt++ = MI_NOOP;
-
-	dev_priv->ring.tail = 0;
-
-	return 0;
-}
-
 /**
  * Sets up the hardware status page for devices that need a physical address
  * in the register.
@@ -133,10 +55,11 @@ static int i915_init_phys_hws(struct drm_device *dev)
 		DRM_ERROR("Can not allocate hardware status page\n");
 		return -ENOMEM;
 	}
-	dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr;
+	dev_priv->render_ring.status_page.page_addr
+		= dev_priv->status_page_dmah->vaddr;
 	dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr;
 
-	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+	memset(dev_priv->render_ring.status_page.page_addr, 0, PAGE_SIZE);
 
 	if (IS_I965G(dev))
 		dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
@@ -159,8 +82,8 @@ static void i915_free_hws(struct drm_device *dev)
 		dev_priv->status_page_dmah = NULL;
 	}
 
-	if (dev_priv->status_gfx_addr) {
-		dev_priv->status_gfx_addr = 0;
+	if (dev_priv->render_ring.status_page.gfx_addr) {
+		dev_priv->render_ring.status_page.gfx_addr = 0;
 		drm_core_ioremapfree(&dev_priv->hws_map, dev);
 	}
 
@@ -172,7 +95,7 @@ void i915_kernel_lost_context(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv;
-	drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
+	struct intel_ring_buffer *ring = &dev_priv->render_ring;
 
 	/*
 	 * We should never lose context on the ring with modesetting
@@ -185,7 +108,7 @@ void i915_kernel_lost_context(struct drm_device * dev)
 	ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
 	ring->space = ring->head - (ring->tail + 8);
 	if (ring->space < 0)
-		ring->space += ring->Size;
+		ring->space += ring->size;
 
 	if (!dev->primary->master)
 		return;
@@ -205,12 +128,11 @@ static int i915_dma_cleanup(struct drm_device * dev)
 	if (dev->irq_enabled)
 		drm_irq_uninstall(dev);
 
-	if (dev_priv->ring.virtual_start) {
-		drm_core_ioremapfree(&dev_priv->ring.map, dev);
-		dev_priv->ring.virtual_start = NULL;
-		dev_priv->ring.map.handle = NULL;
-		dev_priv->ring.map.size = 0;
-	}
+	mutex_lock(&dev->struct_mutex);
+	intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+	if (HAS_BSD(dev))
+		intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring);
+	mutex_unlock(&dev->struct_mutex);
 
 	/* Clear the HWS virtual address at teardown */
 	if (I915_NEED_GFX_HWS(dev))
@@ -233,24 +155,24 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 	}
 
 	if (init->ring_size != 0) {
-		if (dev_priv->ring.ring_obj != NULL) {
+		if (dev_priv->render_ring.gem_object != NULL) {
 			i915_dma_cleanup(dev);
 			DRM_ERROR("Client tried to initialize ringbuffer in "
 				  "GEM mode\n");
 			return -EINVAL;
 		}
 
-		dev_priv->ring.Size = init->ring_size;
+		dev_priv->render_ring.size = init->ring_size;
 
-		dev_priv->ring.map.offset = init->ring_start;
-		dev_priv->ring.map.size = init->ring_size;
-		dev_priv->ring.map.type = 0;
-		dev_priv->ring.map.flags = 0;
-		dev_priv->ring.map.mtrr = 0;
+		dev_priv->render_ring.map.offset = init->ring_start;
+		dev_priv->render_ring.map.size = init->ring_size;
+		dev_priv->render_ring.map.type = 0;
+		dev_priv->render_ring.map.flags = 0;
+		dev_priv->render_ring.map.mtrr = 0;
 
-		drm_core_ioremap_wc(&dev_priv->ring.map, dev);
+		drm_core_ioremap_wc(&dev_priv->render_ring.map, dev);
 
-		if (dev_priv->ring.map.handle == NULL) {
+		if (dev_priv->render_ring.map.handle == NULL) {
 			i915_dma_cleanup(dev);
 			DRM_ERROR("can not ioremap virtual address for"
 				  " ring buffer\n");
@@ -258,7 +180,7 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 		}
 	}
 
-	dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+	dev_priv->render_ring.virtual_start = dev_priv->render_ring.map.handle;
 
 	dev_priv->cpp = init->cpp;
 	dev_priv->back_offset = init->back_offset;
@@ -278,26 +200,29 @@ static int i915_dma_resume(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
+	struct intel_ring_buffer *ring;
 	DRM_DEBUG_DRIVER("%s\n", __func__);
 
-	if (dev_priv->ring.map.handle == NULL) {
+	ring = &dev_priv->render_ring;
+
+	if (ring->map.handle == NULL) {
 		DRM_ERROR("can not ioremap virtual address for"
 			  " ring buffer\n");
 		return -ENOMEM;
 	}
 
 	/* Program Hardware Status Page */
-	if (!dev_priv->hw_status_page) {
+	if (!ring->status_page.page_addr) {
 		DRM_ERROR("Can not find hardware status page\n");
 		return -EINVAL;
 	}
 	DRM_DEBUG_DRIVER("hw status page @ %p\n",
-				dev_priv->hw_status_page);
-
-	if (dev_priv->status_gfx_addr != 0)
-		I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
+				ring->status_page.page_addr);
+	if (ring->status_page.gfx_addr != 0)
+		ring->setup_status_page(dev, ring);
 	else
 		I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
+
 	DRM_DEBUG_DRIVER("Enabled hardware status page\n");
 
 	return 0;
@@ -407,9 +332,8 @@ static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	int i;
-	RING_LOCALS;
 
-	if ((dwords+1) * sizeof(int) >= dev_priv->ring.Size - 8)
+	if ((dwords+1) * sizeof(int) >= dev_priv->render_ring.size - 8)
 		return -EINVAL;
 
 	BEGIN_LP_RING((dwords+1)&~1);
@@ -442,9 +366,7 @@ i915_emit_box(struct drm_device *dev,
 	      struct drm_clip_rect *boxes,
 	      int i, int DR1, int DR4)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_clip_rect box = boxes[i];
-	RING_LOCALS;
 
 	if (box.y2 <= box.y1 || box.x2 <= box.x1 || box.y2 <= 0 || box.x2 <= 0) {
 		DRM_ERROR("Bad box %d,%d..%d,%d\n",
@@ -481,7 +403,6 @@ static void i915_emit_breadcrumb(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
-	RING_LOCALS;
 
 	dev_priv->counter++;
 	if (dev_priv->counter > 0x7FFFFFFFUL)
@@ -535,10 +456,8 @@ static int i915_dispatch_batchbuffer(struct drm_device * dev,
 				     drm_i915_batchbuffer_t * batch,
 				     struct drm_clip_rect *cliprects)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
 	int nbox = batch->num_cliprects;
 	int i = 0, count;
-	RING_LOCALS;
 
 	if ((batch->start | batch->used) & 0x7) {
 		DRM_ERROR("alignment");
@@ -587,7 +506,6 @@ static int i915_dispatch_flip(struct drm_device * dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv =
 		dev->primary->master->driver_priv;
-	RING_LOCALS;
 
 	if (!master_priv->sarea_priv)
 		return -EINVAL;
@@ -640,7 +558,8 @@ static int i915_quiescent(struct drm_device * dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	i915_kernel_lost_context(dev);
-	return i915_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
+	return intel_wait_ring_buffer(dev, &dev_priv->render_ring,
+				      dev_priv->render_ring.size - 8);
 }
 
 static int i915_flush_ioctl(struct drm_device *dev, void *data,
@@ -827,6 +746,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		/* depends on GEM */
 		value = dev_priv->has_gem;
 		break;
+	case I915_PARAM_HAS_BSD:
+		value = HAS_BSD(dev);
+		break;
 	default:
 		DRM_DEBUG_DRIVER("Unknown parameter %d\n",
 				 param->param);
@@ -882,6 +804,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	drm_i915_hws_addr_t *hws = data;
+	struct intel_ring_buffer *ring = &dev_priv->render_ring;
 
 	if (!I915_NEED_GFX_HWS(dev))
 		return -EINVAL;
@@ -898,7 +821,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 	DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
 
-	dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
+	ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12);
 
 	dev_priv->hws_map.offset = dev->agp->base + hws->addr;
 	dev_priv->hws_map.size = 4*1024;
@@ -909,19 +832,19 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 	drm_core_ioremap_wc(&dev_priv->hws_map, dev);
 	if (dev_priv->hws_map.handle == NULL) {
 		i915_dma_cleanup(dev);
-		dev_priv->status_gfx_addr = 0;
+		ring->status_page.gfx_addr = 0;
 		DRM_ERROR("can not ioremap virtual address for"
 				" G33 hw status page\n");
 		return -ENOMEM;
 	}
-	dev_priv->hw_status_page = dev_priv->hws_map.handle;
+	ring->status_page.page_addr = dev_priv->hws_map.handle;
+	memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+	I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
 
-	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
-	I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
 	DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
-				dev_priv->status_gfx_addr);
+			 ring->status_page.gfx_addr);
 	DRM_DEBUG_DRIVER("load hws at %p\n",
-				dev_priv->hw_status_page);
+			 ring->status_page.page_addr);
 	return 0;
 }
 
@@ -1308,7 +1231,7 @@ static void i915_warn_stolen(struct drm_device *dev)
 static void i915_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_mm_node *compressed_fb, *compressed_llb;
+	struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
 	unsigned long cfb_base;
 	unsigned long ll_base = 0;
 
@@ -1377,7 +1300,7 @@ static void i915_cleanup_compression(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	drm_mm_put_block(dev_priv->compressed_fb);
-	if (!IS_GM45(dev))
+	if (dev_priv->compressed_llb)
 		drm_mm_put_block(dev_priv->compressed_llb);
 }
 
@@ -1399,12 +1322,14 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_
 	struct drm_device *dev = pci_get_drvdata(pdev);
 	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
 	if (state == VGA_SWITCHEROO_ON) {
-		printk(KERN_INFO "i915: switched off\n");
+		printk(KERN_INFO "i915: switched on\n");
 		/* i915 resume handler doesn't set to D0 */
 		pci_set_power_state(dev->pdev, PCI_D0);
 		i915_resume(dev);
+		drm_kms_helper_poll_enable(dev);
 	} else {
 		printk(KERN_ERR "i915: switched off\n");
+		drm_kms_helper_poll_disable(dev);
 		i915_suspend(dev, pmm);
 	}
 }
@@ -1479,19 +1404,23 @@ static int i915_load_modeset_init(struct drm_device *dev,
 	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
 	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_ringbuffer;
 
 	ret = vga_switcheroo_register_client(dev->pdev,
 					     i915_switcheroo_set_state,
 					     i915_switcheroo_can_switch);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_vga_client;
+
+	/* IIR "flip pending" bit means done if this bit is set */
+	if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
+		dev_priv->flip_pending_is_done = true;
 
 	intel_modeset_init(dev);
 
 	ret = drm_irq_install(dev);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_vga_switcheroo;
 
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1503,11 +1432,20 @@ static int i915_load_modeset_init(struct drm_device *dev,
 
 	I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
 
-	intel_fbdev_init(dev);
+	ret = intel_fbdev_init(dev);
+	if (ret)
+		goto cleanup_irq;
+
 	drm_kms_helper_poll_init(dev);
 	return 0;
 
-destroy_ringbuffer:
+cleanup_irq:
+	drm_irq_uninstall(dev);
+cleanup_vga_switcheroo:
+	vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
+cleanup_ringbuffer:
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
@@ -1539,14 +1477,11 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	master->driver_priv = NULL;
 }
 
-static void i915_get_mem_freq(struct drm_device *dev)
+static void i915_pineview_get_mem_freq(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 tmp;
 
-	if (!IS_PINEVIEW(dev))
-		return;
-
 	tmp = I915_READ(CLKCFG);
 
 	switch (tmp & CLKCFG_FSB_MASK) {
@@ -1575,8 +1510,525 @@ static void i915_get_mem_freq(struct drm_device *dev)
 		dev_priv->mem_freq = 800;
 		break;
 	}
+
+	/* detect pineview DDR3 setting */
+	tmp = I915_READ(CSHRDDR3CTL);
+	dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
+}
+
+static void i915_ironlake_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u16 ddrpll, csipll;
+
+	ddrpll = I915_READ16(DDRMPLL1);
+	csipll = I915_READ16(CSIPLL0);
+
+	switch (ddrpll & 0xff) {
+	case 0xc:
+		dev_priv->mem_freq = 800;
+		break;
+	case 0x10:
+		dev_priv->mem_freq = 1066;
+		break;
+	case 0x14:
+		dev_priv->mem_freq = 1333;
+		break;
+	case 0x18:
+		dev_priv->mem_freq = 1600;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
+				 ddrpll & 0xff);
+		dev_priv->mem_freq = 0;
+		break;
+	}
+
+	dev_priv->r_t = dev_priv->mem_freq;
+
+	switch (csipll & 0x3ff) {
+	case 0x00c:
+		dev_priv->fsb_freq = 3200;
+		break;
+	case 0x00e:
+		dev_priv->fsb_freq = 3733;
+		break;
+	case 0x010:
+		dev_priv->fsb_freq = 4266;
+		break;
+	case 0x012:
+		dev_priv->fsb_freq = 4800;
+		break;
+	case 0x014:
+		dev_priv->fsb_freq = 5333;
+		break;
+	case 0x016:
+		dev_priv->fsb_freq = 5866;
+		break;
+	case 0x018:
+		dev_priv->fsb_freq = 6400;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
+				 csipll & 0x3ff);
+		dev_priv->fsb_freq = 0;
+		break;
+	}
+
+	if (dev_priv->fsb_freq == 3200) {
+		dev_priv->c_m = 0;
+	} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
+		dev_priv->c_m = 1;
+	} else {
+		dev_priv->c_m = 2;
+	}
+}
+
+struct v_table {
+	u8 vid;
+	unsigned long vd; /* in .1 mil */
+	unsigned long vm; /* in .1 mil */
+	u8 pvid;
+};
+
+static struct v_table v_table[] = {
+	{ 0, 16125, 15000, 0x7f, },
+	{ 1, 16000, 14875, 0x7e, },
+	{ 2, 15875, 14750, 0x7d, },
+	{ 3, 15750, 14625, 0x7c, },
+	{ 4, 15625, 14500, 0x7b, },
+	{ 5, 15500, 14375, 0x7a, },
+	{ 6, 15375, 14250, 0x79, },
+	{ 7, 15250, 14125, 0x78, },
+	{ 8, 15125, 14000, 0x77, },
+	{ 9, 15000, 13875, 0x76, },
+	{ 10, 14875, 13750, 0x75, },
+	{ 11, 14750, 13625, 0x74, },
+	{ 12, 14625, 13500, 0x73, },
+	{ 13, 14500, 13375, 0x72, },
+	{ 14, 14375, 13250, 0x71, },
+	{ 15, 14250, 13125, 0x70, },
+	{ 16, 14125, 13000, 0x6f, },
+	{ 17, 14000, 12875, 0x6e, },
+	{ 18, 13875, 12750, 0x6d, },
+	{ 19, 13750, 12625, 0x6c, },
+	{ 20, 13625, 12500, 0x6b, },
+	{ 21, 13500, 12375, 0x6a, },
+	{ 22, 13375, 12250, 0x69, },
+	{ 23, 13250, 12125, 0x68, },
+	{ 24, 13125, 12000, 0x67, },
+	{ 25, 13000, 11875, 0x66, },
+	{ 26, 12875, 11750, 0x65, },
+	{ 27, 12750, 11625, 0x64, },
+	{ 28, 12625, 11500, 0x63, },
+	{ 29, 12500, 11375, 0x62, },
+	{ 30, 12375, 11250, 0x61, },
+	{ 31, 12250, 11125, 0x60, },
+	{ 32, 12125, 11000, 0x5f, },
+	{ 33, 12000, 10875, 0x5e, },
+	{ 34, 11875, 10750, 0x5d, },
+	{ 35, 11750, 10625, 0x5c, },
+	{ 36, 11625, 10500, 0x5b, },
+	{ 37, 11500, 10375, 0x5a, },
+	{ 38, 11375, 10250, 0x59, },
+	{ 39, 11250, 10125, 0x58, },
+	{ 40, 11125, 10000, 0x57, },
+	{ 41, 11000, 9875, 0x56, },
+	{ 42, 10875, 9750, 0x55, },
+	{ 43, 10750, 9625, 0x54, },
+	{ 44, 10625, 9500, 0x53, },
+	{ 45, 10500, 9375, 0x52, },
+	{ 46, 10375, 9250, 0x51, },
+	{ 47, 10250, 9125, 0x50, },
+	{ 48, 10125, 9000, 0x4f, },
+	{ 49, 10000, 8875, 0x4e, },
+	{ 50, 9875, 8750, 0x4d, },
+	{ 51, 9750, 8625, 0x4c, },
+	{ 52, 9625, 8500, 0x4b, },
+	{ 53, 9500, 8375, 0x4a, },
+	{ 54, 9375, 8250, 0x49, },
+	{ 55, 9250, 8125, 0x48, },
+	{ 56, 9125, 8000, 0x47, },
+	{ 57, 9000, 7875, 0x46, },
+	{ 58, 8875, 7750, 0x45, },
+	{ 59, 8750, 7625, 0x44, },
+	{ 60, 8625, 7500, 0x43, },
+	{ 61, 8500, 7375, 0x42, },
+	{ 62, 8375, 7250, 0x41, },
+	{ 63, 8250, 7125, 0x40, },
+	{ 64, 8125, 7000, 0x3f, },
+	{ 65, 8000, 6875, 0x3e, },
+	{ 66, 7875, 6750, 0x3d, },
+	{ 67, 7750, 6625, 0x3c, },
+	{ 68, 7625, 6500, 0x3b, },
+	{ 69, 7500, 6375, 0x3a, },
+	{ 70, 7375, 6250, 0x39, },
+	{ 71, 7250, 6125, 0x38, },
+	{ 72, 7125, 6000, 0x37, },
+	{ 73, 7000, 5875, 0x36, },
+	{ 74, 6875, 5750, 0x35, },
+	{ 75, 6750, 5625, 0x34, },
+	{ 76, 6625, 5500, 0x33, },
+	{ 77, 6500, 5375, 0x32, },
+	{ 78, 6375, 5250, 0x31, },
+	{ 79, 6250, 5125, 0x30, },
+	{ 80, 6125, 5000, 0x2f, },
+	{ 81, 6000, 4875, 0x2e, },
+	{ 82, 5875, 4750, 0x2d, },
+	{ 83, 5750, 4625, 0x2c, },
+	{ 84, 5625, 4500, 0x2b, },
+	{ 85, 5500, 4375, 0x2a, },
+	{ 86, 5375, 4250, 0x29, },
+	{ 87, 5250, 4125, 0x28, },
+	{ 88, 5125, 4000, 0x27, },
+	{ 89, 5000, 3875, 0x26, },
+	{ 90, 4875, 3750, 0x25, },
+	{ 91, 4750, 3625, 0x24, },
+	{ 92, 4625, 3500, 0x23, },
+	{ 93, 4500, 3375, 0x22, },
+	{ 94, 4375, 3250, 0x21, },
+	{ 95, 4250, 3125, 0x20, },
+	{ 96, 4125, 3000, 0x1f, },
+	{ 97, 4125, 3000, 0x1e, },
+	{ 98, 4125, 3000, 0x1d, },
+	{ 99, 4125, 3000, 0x1c, },
+	{ 100, 4125, 3000, 0x1b, },
+	{ 101, 4125, 3000, 0x1a, },
+	{ 102, 4125, 3000, 0x19, },
+	{ 103, 4125, 3000, 0x18, },
+	{ 104, 4125, 3000, 0x17, },
+	{ 105, 4125, 3000, 0x16, },
+	{ 106, 4125, 3000, 0x15, },
+	{ 107, 4125, 3000, 0x14, },
+	{ 108, 4125, 3000, 0x13, },
+	{ 109, 4125, 3000, 0x12, },
+	{ 110, 4125, 3000, 0x11, },
+	{ 111, 4125, 3000, 0x10, },
+	{ 112, 4125, 3000, 0x0f, },
+	{ 113, 4125, 3000, 0x0e, },
+	{ 114, 4125, 3000, 0x0d, },
+	{ 115, 4125, 3000, 0x0c, },
+	{ 116, 4125, 3000, 0x0b, },
+	{ 117, 4125, 3000, 0x0a, },
+	{ 118, 4125, 3000, 0x09, },
+	{ 119, 4125, 3000, 0x08, },
+	{ 120, 1125, 0, 0x07, },
+	{ 121, 1000, 0, 0x06, },
+	{ 122, 875, 0, 0x05, },
+	{ 123, 750, 0, 0x04, },
+	{ 124, 625, 0, 0x03, },
+	{ 125, 500, 0, 0x02, },
+	{ 126, 375, 0, 0x01, },
+	{ 127, 0, 0, 0x00, },
+};
+
+struct cparams {
+	int i;
+	int t;
+	int m;
+	int c;
+};
+
+static struct cparams cparams[] = {
+	{ 1, 1333, 301, 28664 },
+	{ 1, 1066, 294, 24460 },
+	{ 1, 800, 294, 25192 },
+	{ 0, 1333, 276, 27605 },
+	{ 0, 1066, 276, 27605 },
+	{ 0, 800, 231, 23784 },
+};
+
+unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
+{
+	u64 total_count, diff, ret;
+	u32 count1, count2, count3, m = 0, c = 0;
+	unsigned long now = jiffies_to_msecs(jiffies), diff1;
+	int i;
+
+	diff1 = now - dev_priv->last_time1;
+
+	count1 = I915_READ(DMIEC);
+	count2 = I915_READ(DDREC);
+	count3 = I915_READ(CSIEC);
+
+	total_count = count1 + count2 + count3;
+
+	/* FIXME: handle per-counter overflow */
+	if (total_count < dev_priv->last_count1) {
+		diff = ~0UL - dev_priv->last_count1;
+		diff += total_count;
+	} else {
+		diff = total_count - dev_priv->last_count1;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cparams); i++) {
+		if (cparams[i].i == dev_priv->c_m &&
+		    cparams[i].t == dev_priv->r_t) {
+			m = cparams[i].m;
+			c = cparams[i].c;
+			break;
+		}
+	}
+
+	div_u64(diff, diff1);
+	ret = ((m * diff) + c);
+	div_u64(ret, 10);
+
+	dev_priv->last_count1 = total_count;
+	dev_priv->last_time1 = now;
+
+	return ret;
 }
 
+unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
+{
+	unsigned long m, x, b;
+	u32 tsfs;
+
+	tsfs = I915_READ(TSFS);
+
+	m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
+	x = I915_READ8(TR1);
+
+	b = tsfs & TSFS_INTR_MASK;
+
+	return ((m * x) / 127) - b;
+}
+
+static unsigned long pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
+{
+	unsigned long val = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(v_table); i++) {
+		if (v_table[i].pvid == pxvid) {
+			if (IS_MOBILE(dev_priv->dev))
+				val = v_table[i].vm;
+			else
+				val = v_table[i].vd;
+		}
+	}
+
+	return val;
+}
+
+void i915_update_gfx_val(struct drm_i915_private *dev_priv)
+{
+	struct timespec now, diff1;
+	u64 diff;
+	unsigned long diffms;
+	u32 count;
+
+	getrawmonotonic(&now);
+	diff1 = timespec_sub(now, dev_priv->last_time2);
+
+	/* Don't divide by 0 */
+	diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000;
+	if (!diffms)
+		return;
+
+	count = I915_READ(GFXEC);
+
+	if (count < dev_priv->last_count2) {
+		diff = ~0UL - dev_priv->last_count2;
+		diff += count;
+	} else {
+		diff = count - dev_priv->last_count2;
+	}
+
+	dev_priv->last_count2 = count;
+	dev_priv->last_time2 = now;
+
+	/* More magic constants... */
+	diff = diff * 1181;
+	div_u64(diff, diffms * 10);
+	dev_priv->gfx_power = diff;
+}
+
+unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
+{
+	unsigned long t, corr, state1, corr2, state2;
+	u32 pxvid, ext_v;
+
+	pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4));
+	pxvid = (pxvid >> 24) & 0x7f;
+	ext_v = pvid_to_extvid(dev_priv, pxvid);
+
+	state1 = ext_v;
+
+	t = i915_mch_val(dev_priv);
+
+	/* Revel in the empirically derived constants */
+
+	/* Correction factor in 1/100000 units */
+	if (t > 80)
+		corr = ((t * 2349) + 135940);
+	else if (t >= 50)
+		corr = ((t * 964) + 29317);
+	else /* < 50 */
+		corr = ((t * 301) + 1004);
+
+	corr = corr * ((150142 * state1) / 10000 - 78642);
+	corr /= 100000;
+	corr2 = (corr * dev_priv->corr);
+
+	state2 = (corr2 * state1) / 10000;
+	state2 /= 100; /* convert to mW */
+
+	i915_update_gfx_val(dev_priv);
+
+	return dev_priv->gfx_power + state2;
+}
+
+/* Global for IPS driver to get at the current i915 device */
+static struct drm_i915_private *i915_mch_dev;
+/*
+ * Lock protecting IPS related data structures
+ *   - i915_mch_dev
+ *   - dev_priv->max_delay
+ *   - dev_priv->min_delay
+ *   - dev_priv->fmax
+ *   - dev_priv->gpu_busy
+ */
+DEFINE_SPINLOCK(mchdev_lock);
+
+/**
+ * i915_read_mch_val - return value for IPS use
+ *
+ * Calculate and return a value for the IPS driver to use when deciding whether
+ * we have thermal and power headroom to increase CPU or GPU power budget.
+ */
+unsigned long i915_read_mch_val(void)
+{
+  	struct drm_i915_private *dev_priv;
+	unsigned long chipset_val, graphics_val, ret = 0;
+
+  	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev)
+		goto out_unlock;
+	dev_priv = i915_mch_dev;
+
+	chipset_val = i915_chipset_val(dev_priv);
+	graphics_val = i915_gfx_val(dev_priv);
+
+	ret = chipset_val + graphics_val;
+
+out_unlock:
+  	spin_unlock(&mchdev_lock);
+
+  	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_read_mch_val);
+
+/**
+ * i915_gpu_raise - raise GPU frequency limit
+ *
+ * Raise the limit; IPS indicates we have thermal headroom.
+ */
+bool i915_gpu_raise(void)
+{
+  	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+  	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	if (dev_priv->max_delay > dev_priv->fmax)
+		dev_priv->max_delay--;
+
+out_unlock:
+  	spin_unlock(&mchdev_lock);
+
+  	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_raise);
+
+/**
+ * i915_gpu_lower - lower GPU frequency limit
+ *
+ * IPS indicates we're close to a thermal limit, so throttle back the GPU
+ * frequency maximum.
+ */
+bool i915_gpu_lower(void)
+{
+  	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+  	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	if (dev_priv->max_delay < dev_priv->min_delay)
+		dev_priv->max_delay++;
+
+out_unlock:
+  	spin_unlock(&mchdev_lock);
+
+  	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_lower);
+
+/**
+ * i915_gpu_busy - indicate GPU business to IPS
+ *
+ * Tell the IPS driver whether or not the GPU is busy.
+ */
+bool i915_gpu_busy(void)
+{
+  	struct drm_i915_private *dev_priv;
+	bool ret = false;
+
+  	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev)
+		goto out_unlock;
+	dev_priv = i915_mch_dev;
+
+	ret = dev_priv->busy;
+
+out_unlock:
+  	spin_unlock(&mchdev_lock);
+
+  	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_busy);
+
+/**
+ * i915_gpu_turbo_disable - disable graphics turbo
+ *
+ * Disable graphics turbo by resetting the max frequency and setting the
+ * current frequency to the default.
+ */
+bool i915_gpu_turbo_disable(void)
+{
+  	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+  	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	dev_priv->max_delay = dev_priv->fstart;
+
+	if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart))
+		ret = false;
+
+out_unlock:
+  	spin_unlock(&mchdev_lock);
+
+  	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1594,7 +2046,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	resource_size_t base, size;
 	int ret = 0, mmio_bar;
 	uint32_t agp_size, prealloc_size, prealloc_start;
-
 	/* i915 has 4 more counters */
 	dev->counters += 4;
 	dev->types[6] = _DRM_STAT_IRQ;
@@ -1672,6 +2123,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		dev_priv->has_gem = 0;
 	}
 
+	if (dev_priv->has_gem == 0 &&
+	    drm_core_check_feature(dev, DRIVER_MODESET)) {
+		DRM_ERROR("kernel modesetting requires GEM, disabling driver.\n");
+		ret = -ENODEV;
+		goto out_iomapfree;
+	}
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) {
@@ -1691,7 +2149,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			goto out_workqueue_free;
 	}
 
-	i915_get_mem_freq(dev);
+	if (IS_PINEVIEW(dev))
+		i915_pineview_get_mem_freq(dev);
+	else if (IS_IRONLAKE(dev))
+		i915_ironlake_get_mem_freq(dev);
 
 	/* On the 945G/GM, the chipset reports the MSI capability on the
 	 * integrated graphics even though the support isn't actually there
@@ -1709,7 +2170,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	spin_lock_init(&dev_priv->user_irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
-	dev_priv->user_irq_refcount = 0;
 	dev_priv->trace_irq_seqno = 0;
 
 	ret = drm_vblank_init(dev, I915_NUM_PIPE);
@@ -1738,6 +2198,12 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
 		    (unsigned long) dev);
+
+	spin_lock(&mchdev_lock);
+	i915_mch_dev = dev_priv;
+	dev_priv->mchdev_lock = &mchdev_lock;
+	spin_unlock(&mchdev_lock);
+
 	return 0;
 
 out_workqueue_free:
@@ -1759,6 +2225,10 @@ int i915_driver_unload(struct drm_device *dev)
 
 	i915_destroy_error_state(dev);
 
+	spin_lock(&mchdev_lock);
+	i915_mch_dev = NULL;
+	spin_unlock(&mchdev_lock);
+
 	destroy_workqueue(dev_priv->wq);
 	del_timer_sync(&dev_priv->hangcheck_timer);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 5c51e45ab68..423dc90c1e2 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -60,95 +60,95 @@ extern int intel_agp_enabled;
 	.subdevice = PCI_ANY_ID,		\
 	.driver_data = (unsigned long) info }
 
-const static struct intel_device_info intel_i830_info = {
+static const struct intel_device_info intel_i830_info = {
 	.is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
 };
 
-const static struct intel_device_info intel_845g_info = {
+static const struct intel_device_info intel_845g_info = {
 	.is_i8xx = 1,
 };
 
-const static struct intel_device_info intel_i85x_info = {
+static const struct intel_device_info intel_i85x_info = {
 	.is_i8xx = 1, .is_i85x = 1, .is_mobile = 1,
 	.cursor_needs_physical = 1,
 };
 
-const static struct intel_device_info intel_i865g_info = {
+static const struct intel_device_info intel_i865g_info = {
 	.is_i8xx = 1,
 };
 
-const static struct intel_device_info intel_i915g_info = {
+static const struct intel_device_info intel_i915g_info = {
 	.is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
 };
-const static struct intel_device_info intel_i915gm_info = {
+static const struct intel_device_info intel_i915gm_info = {
 	.is_i9xx = 1,  .is_mobile = 1,
 	.cursor_needs_physical = 1,
 };
-const static struct intel_device_info intel_i945g_info = {
+static const struct intel_device_info intel_i945g_info = {
 	.is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
 };
-const static struct intel_device_info intel_i945gm_info = {
+static const struct intel_device_info intel_i945gm_info = {
 	.is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1,
 	.has_hotplug = 1, .cursor_needs_physical = 1,
 };
 
-const static struct intel_device_info intel_i965g_info = {
+static const struct intel_device_info intel_i965g_info = {
 	.is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_i965gm_info = {
+static const struct intel_device_info intel_i965gm_info = {
 	.is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
 	.is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_g33_info = {
+static const struct intel_device_info intel_g33_info = {
 	.is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_g45_info = {
+static const struct intel_device_info intel_g45_info = {
 	.is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
 	.has_pipe_cxsr = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_gm45_info = {
+static const struct intel_device_info intel_gm45_info = {
 	.is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
 	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
 	.has_pipe_cxsr = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_pineview_info = {
+static const struct intel_device_info intel_pineview_info = {
 	.is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
 	.need_gfx_hws = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_ironlake_d_info = {
+static const struct intel_device_info intel_ironlake_d_info = {
 	.is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
 	.has_pipe_cxsr = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_ironlake_m_info = {
+static const struct intel_device_info intel_ironlake_m_info = {
 	.is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
 	.need_gfx_hws = 1, .has_rc6 = 1,
 	.has_hotplug = 1,
 };
 
-const static struct intel_device_info intel_sandybridge_d_info = {
+static const struct intel_device_info intel_sandybridge_d_info = {
 	.is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
 	.has_hotplug = 1, .is_gen6 = 1,
 };
 
-const static struct intel_device_info intel_sandybridge_m_info = {
+static const struct intel_device_info intel_sandybridge_m_info = {
 	.is_i965g = 1, .is_mobile = 1, .is_i9xx = 1, .need_gfx_hws = 1,
 	.has_hotplug = 1, .is_gen6 = 1,
 };
 
-const static struct pci_device_id pciidlist[] = {
+static const struct pci_device_id pciidlist[] = {
 	INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
 	INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
 	INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
@@ -340,7 +340,7 @@ int i965_reset(struct drm_device *dev, u8 flags)
 	/*
 	 * Clear request list
 	 */
-	i915_gem_retire_requests(dev);
+	i915_gem_retire_requests(dev, &dev_priv->render_ring);
 
 	if (need_display)
 		i915_save_display(dev);
@@ -370,6 +370,7 @@ int i965_reset(struct drm_device *dev, u8 flags)
 		}
 	} else {
 		DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
+		mutex_unlock(&dev->struct_mutex);
 		return -ENODEV;
 	}
 
@@ -388,33 +389,10 @@ int i965_reset(struct drm_device *dev, u8 flags)
 	 * switched away).
 	 */
 	if (drm_core_check_feature(dev, DRIVER_MODESET) ||
-	    !dev_priv->mm.suspended) {
-		drm_i915_ring_buffer_t *ring = &dev_priv->ring;
-		struct drm_gem_object *obj = ring->ring_obj;
-		struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+			!dev_priv->mm.suspended) {
+		struct intel_ring_buffer *ring = &dev_priv->render_ring;
 		dev_priv->mm.suspended = 0;
-
-		/* Stop the ring if it's running. */
-		I915_WRITE(PRB0_CTL, 0);
-		I915_WRITE(PRB0_TAIL, 0);
-		I915_WRITE(PRB0_HEAD, 0);
-
-		/* Initialize the ring. */
-		I915_WRITE(PRB0_START, obj_priv->gtt_offset);
-		I915_WRITE(PRB0_CTL,
-			   ((obj->size - 4096) & RING_NR_PAGES) |
-			   RING_NO_REPORT |
-			   RING_VALID);
-		if (!drm_core_check_feature(dev, DRIVER_MODESET))
-			i915_kernel_lost_context(dev);
-		else {
-			ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-			ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
-			ring->space = ring->head - (ring->tail + 8);
-			if (ring->space < 0)
-				ring->space += ring->Size;
-		}
-
+		ring->init(dev, ring);
 		mutex_unlock(&dev->struct_mutex);
 		drm_irq_uninstall(dev);
 		drm_irq_install(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7f797ef1ab3..2e1744d37ad 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -32,6 +32,7 @@
 
 #include "i915_reg.h"
 #include "intel_bios.h"
+#include "intel_ringbuffer.h"
 #include <linux/io-mapping.h>
 
 /* General customization:
@@ -55,6 +56,8 @@ enum plane {
 
 #define I915_NUM_PIPE	2
 
+#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
 /* Interface history:
  *
  * 1.1: Original.
@@ -89,16 +92,6 @@ struct drm_i915_gem_phys_object {
 	struct drm_gem_object *cur_obj;
 };
 
-typedef struct _drm_i915_ring_buffer {
-	unsigned long Size;
-	u8 *virtual_start;
-	int head;
-	int tail;
-	int space;
-	drm_local_map_t map;
-	struct drm_gem_object *ring_obj;
-} drm_i915_ring_buffer_t;
-
 struct mem_block {
 	struct mem_block *next;
 	struct mem_block *prev;
@@ -222,6 +215,7 @@ enum no_fbc_reason {
 	FBC_MODE_TOO_LARGE, /* mode too large for compression */
 	FBC_BAD_PLANE, /* fbc not supported on plane */
 	FBC_NOT_TILED, /* buffer not tiled */
+	FBC_MULTIPLE_PIPES, /* more than one pipe active */
 };
 
 enum intel_pch {
@@ -229,6 +223,8 @@ enum intel_pch {
 	PCH_CPT,	/* Cougarpoint PCH */
 };
 
+#define QUIRK_PIPEA_FORCE (1<<0)
+
 struct intel_fbdev;
 
 typedef struct drm_i915_private {
@@ -241,17 +237,15 @@ typedef struct drm_i915_private {
 	void __iomem *regs;
 
 	struct pci_dev *bridge_dev;
-	drm_i915_ring_buffer_t ring;
+	struct intel_ring_buffer render_ring;
+	struct intel_ring_buffer bsd_ring;
 
 	drm_dma_handle_t *status_page_dmah;
-	void *hw_status_page;
 	void *seqno_page;
 	dma_addr_t dma_status_page;
 	uint32_t counter;
-	unsigned int status_gfx_addr;
 	unsigned int seqno_gfx_addr;
 	drm_local_map_t hws_map;
-	struct drm_gem_object *hws_obj;
 	struct drm_gem_object *seqno_obj;
 	struct drm_gem_object *pwrctx;
 
@@ -267,8 +261,6 @@ typedef struct drm_i915_private {
 	atomic_t irq_received;
 	/** Protects user_irq_refcount and irq_mask_reg */
 	spinlock_t user_irq_lock;
-	/** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */
-	int user_irq_refcount;
 	u32 trace_irq_seqno;
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 irq_mask_reg;
@@ -289,6 +281,7 @@ typedef struct drm_i915_private {
 	struct mem_block *agp_heap;
 	unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
 	int vblank_pipe;
+	int num_pipe;
 
 	/* For hangcheck timer */
 #define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
@@ -334,7 +327,7 @@ typedef struct drm_i915_private {
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
-	unsigned int fsb_freq, mem_freq;
+	unsigned int fsb_freq, mem_freq, is_ddr3;
 
 	spinlock_t error_lock;
 	struct drm_i915_error_state *first_error;
@@ -347,6 +340,8 @@ typedef struct drm_i915_private {
 	/* PCH chipset type */
 	enum intel_pch pch_type;
 
+	unsigned long quirks;
+
 	/* Register state */
 	bool modeset_on_lid;
 	u8 saveLBB;
@@ -514,18 +509,7 @@ typedef struct drm_i915_private {
 		 */
 		struct list_head shrink_list;
 
-		/**
-		 * List of objects currently involved in rendering from the
-		 * ringbuffer.
-		 *
-		 * Includes buffers having the contents of their GPU caches
-		 * flushed, not necessarily primitives.  last_rendering_seqno
-		 * represents when the rendering involved will be completed.
-		 *
-		 * A reference is held on the buffer while on this list.
-		 */
 		spinlock_t active_list_lock;
-		struct list_head active_list;
 
 		/**
 		 * List of objects which are not in the ringbuffer but which
@@ -563,12 +547,6 @@ typedef struct drm_i915_private {
 		struct list_head fence_list;
 
 		/**
-		 * List of breadcrumbs associated with GPU requests currently
-		 * outstanding.
-		 */
-		struct list_head request_list;
-
-		/**
 		 * We leave the user IRQ off as much as possible,
 		 * but this means that requests will finish and never
 		 * be retired once the system goes idle. Set a timer to
@@ -623,6 +601,7 @@ typedef struct drm_i915_private {
 	struct drm_crtc *plane_to_crtc_mapping[2];
 	struct drm_crtc *pipe_to_crtc_mapping[2];
 	wait_queue_head_t pending_flip_queue;
+	bool flip_pending_is_done;
 
 	/* Reclocking support */
 	bool render_reclock_avail;
@@ -644,6 +623,18 @@ typedef struct drm_i915_private {
 	u8 cur_delay;
 	u8 min_delay;
 	u8 max_delay;
+	u8 fmax;
+	u8 fstart;
+
+ 	u64 last_count1;
+ 	unsigned long last_time1;
+ 	u64 last_count2;
+ 	struct timespec last_time2;
+ 	unsigned long gfx_power;
+ 	int c_m;
+ 	int r_t;
+ 	u8 corr;
+	spinlock_t *mchdev_lock;
 
 	enum no_fbc_reason no_fbc_reason;
 
@@ -671,19 +662,64 @@ struct drm_i915_gem_object {
 	 * (has pending rendering), and is not set if it's on inactive (ready
 	 * to be unbound).
 	 */
-	int active;
+	unsigned int active : 1;
 
 	/**
 	 * This is set if the object has been written to since last bound
 	 * to the GTT
 	 */
-	int dirty;
+	unsigned int dirty : 1;
+
+	/**
+	 * Fence register bits (if any) for this object.  Will be set
+	 * as needed when mapped into the GTT.
+	 * Protected by dev->struct_mutex.
+	 *
+	 * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
+	 */
+	int fence_reg : 5;
+
+	/**
+	 * Used for checking the object doesn't appear more than once
+	 * in an execbuffer object list.
+	 */
+	unsigned int in_execbuffer : 1;
+
+	/**
+	 * Advice: are the backing pages purgeable?
+	 */
+	unsigned int madv : 2;
+
+	/**
+	 * Refcount for the pages array. With the current locking scheme, there
+	 * are at most two concurrent users: Binding a bo to the gtt and
+	 * pwrite/pread using physical addresses. So two bits for a maximum
+	 * of two users are enough.
+	 */
+	unsigned int pages_refcount : 2;
+#define DRM_I915_GEM_OBJECT_MAX_PAGES_REFCOUNT 0x3
+
+	/**
+	 * Current tiling mode for the object.
+	 */
+	unsigned int tiling_mode : 2;
+
+	/** How many users have pinned this object in GTT space. The following
+	 * users can each hold at most one reference: pwrite/pread, pin_ioctl
+	 * (via user_pin_count), execbuffer (objects are not allowed multiple
+	 * times for the same batchbuffer), and the framebuffer code. When
+	 * switching/pageflipping, the framebuffer code has at most two buffers
+	 * pinned per crtc.
+	 *
+	 * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
+	 * bits with absolutely no headroom. So use 4 bits. */
+	int pin_count : 4;
+#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
 
 	/** AGP memory structure for our GTT binding. */
 	DRM_AGP_MEM *agp_mem;
 
 	struct page **pages;
-	int pages_refcount;
 
 	/**
 	 * Current offset of the object in GTT space.
@@ -692,26 +728,18 @@ struct drm_i915_gem_object {
 	 */
 	uint32_t gtt_offset;
 
+	/* Which ring is refering to is this object */
+	struct intel_ring_buffer *ring;
+
 	/**
 	 * Fake offset for use by mmap(2)
 	 */
 	uint64_t mmap_offset;
 
-	/**
-	 * Fence register bits (if any) for this object.  Will be set
-	 * as needed when mapped into the GTT.
-	 * Protected by dev->struct_mutex.
-	 */
-	int fence_reg;
-
-	/** How many users have pinned this object in GTT space */
-	int pin_count;
-
 	/** Breadcrumb of last rendering to the buffer. */
 	uint32_t last_rendering_seqno;
 
-	/** Current tiling mode for the object. */
-	uint32_t tiling_mode;
+	/** Current tiling stride for the object, if it's tiled. */
 	uint32_t stride;
 
 	/** Record of address bit 17 of each page at last unbind. */
@@ -734,17 +762,6 @@ struct drm_i915_gem_object {
 	struct drm_i915_gem_phys_object *phys_obj;
 
 	/**
-	 * Used for checking the object doesn't appear more than once
-	 * in an execbuffer object list.
-	 */
-	int in_execbuffer;
-
-	/**
-	 * Advice: are the backing pages purgeable?
-	 */
-	int madv;
-
-	/**
 	 * Number of crtcs where this object is currently the fb, but
 	 * will be page flipped away on the next vblank.  When it
 	 * reaches 0, dev_priv->pending_flip_queue will be woken up.
@@ -765,6 +782,9 @@ struct drm_i915_gem_object {
  * an emission time with seqnos for tracking how far ahead of the GPU we are.
  */
 struct drm_i915_gem_request {
+	/** On Which ring this request was generated */
+	struct intel_ring_buffer *ring;
+
 	/** GEM sequence number associated with this request. */
 	uint32_t seqno;
 
@@ -821,6 +841,11 @@ extern int i915_emit_box(struct drm_device *dev,
 			 struct drm_clip_rect *boxes,
 			 int i, int DR1, int DR4);
 extern int i965_reset(struct drm_device *dev, u8 flags);
+extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
+extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
+
 
 /* i915_irq.c */
 void i915_hangcheck_elapsed(unsigned long data);
@@ -829,9 +854,7 @@ extern int i915_irq_emit(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 extern int i915_irq_wait(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
-void i915_user_irq_get(struct drm_device *dev);
 void i915_trace_irq_get(struct drm_device *dev, u32 seqno);
-void i915_user_irq_put(struct drm_device *dev);
 extern void i915_enable_interrupt (struct drm_device *dev);
 
 extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
@@ -849,6 +872,11 @@ extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
 extern int i915_vblank_swap(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv);
 extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+extern void i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask);
+extern void ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv,
+		u32 mask);
+extern void ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv,
+		u32 mask);
 
 void
 i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
@@ -922,11 +950,13 @@ void i915_gem_object_unpin(struct drm_gem_object *obj);
 int i915_gem_object_unbind(struct drm_gem_object *obj);
 void i915_gem_release_mmap(struct drm_gem_object *obj);
 void i915_gem_lastclose(struct drm_device *dev);
-uint32_t i915_get_gem_seqno(struct drm_device *dev);
+uint32_t i915_get_gem_seqno(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
 bool i915_seqno_passed(uint32_t seq1, uint32_t seq2);
 int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
 int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
-void i915_gem_retire_requests(struct drm_device *dev);
+void i915_gem_retire_requests(struct drm_device *dev,
+		 struct intel_ring_buffer *ring);
 void i915_gem_retire_work_handler(struct work_struct *work);
 void i915_gem_clflush_object(struct drm_gem_object *obj);
 int i915_gem_object_set_domain(struct drm_gem_object *obj,
@@ -937,9 +967,13 @@ void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
 int i915_gem_do_init(struct drm_device *dev, unsigned long start,
 		     unsigned long end);
 int i915_gem_idle(struct drm_device *dev);
-uint32_t i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
-			  uint32_t flush_domains);
-int i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible);
+uint32_t i915_add_request(struct drm_device *dev,
+		struct drm_file *file_priv,
+		uint32_t flush_domains,
+		struct intel_ring_buffer *ring);
+int i915_do_wait_request(struct drm_device *dev,
+		uint32_t seqno, int interruptible,
+		struct intel_ring_buffer *ring);
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
 				      int write);
@@ -1015,7 +1049,7 @@ extern void g4x_disable_fbc(struct drm_device *dev);
 extern void intel_disable_fbc(struct drm_device *dev);
 extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval);
 extern bool intel_fbc_enabled(struct drm_device *dev);
-
+extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
 extern void intel_detect_pch (struct drm_device *dev);
 extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
 
@@ -1026,7 +1060,8 @@ extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
  * has access to the ring.
  */
 #define RING_LOCK_TEST_WITH_RETURN(dev, file_priv) do {			\
-	if (((drm_i915_private_t *)dev->dev_private)->ring.ring_obj == NULL) \
+	if (((drm_i915_private_t *)dev->dev_private)->render_ring.gem_object \
+			== NULL)					\
 		LOCK_TEST_WITH_RETURN(dev, file_priv);			\
 } while (0)
 
@@ -1039,35 +1074,31 @@ extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
 #define I915_WRITE64(reg, val)	writeq(val, dev_priv->regs + (reg))
 #define I915_READ64(reg)	readq(dev_priv->regs + (reg))
 #define POSTING_READ(reg)	(void)I915_READ(reg)
+#define POSTING_READ16(reg)	(void)I915_READ16(reg)
 
 #define I915_VERBOSE 0
 
-#define RING_LOCALS	volatile unsigned int *ring_virt__;
-
-#define BEGIN_LP_RING(n) do {						\
-	int bytes__ = 4*(n);						\
-	if (I915_VERBOSE) DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n));	\
-	/* a wrap must occur between instructions so pad beforehand */	\
-	if (unlikely (dev_priv->ring.tail + bytes__ > dev_priv->ring.Size)) \
-		i915_wrap_ring(dev);					\
-	if (unlikely (dev_priv->ring.space < bytes__))			\
-		i915_wait_ring(dev, bytes__, __func__);			\
-	ring_virt__ = (unsigned int *)					\
-	        (dev_priv->ring.virtual_start + dev_priv->ring.tail);	\
-	dev_priv->ring.tail += bytes__;					\
-	dev_priv->ring.tail &= dev_priv->ring.Size - 1;			\
-	dev_priv->ring.space -= bytes__;				\
+#define BEGIN_LP_RING(n)  do { \
+	drm_i915_private_t *dev_priv = dev->dev_private;                \
+	if (I915_VERBOSE)						\
+		DRM_DEBUG("   BEGIN_LP_RING %x\n", (int)(n));		\
+	intel_ring_begin(dev, &dev_priv->render_ring, (n));		\
 } while (0)
 
-#define OUT_RING(n) do {						\
-	if (I915_VERBOSE) DRM_DEBUG("   OUT_RING %x\n", (int)(n));	\
-	*ring_virt__++ = (n);						\
+
+#define OUT_RING(x) do {						\
+	drm_i915_private_t *dev_priv = dev->dev_private;		\
+	if (I915_VERBOSE)						\
+		DRM_DEBUG("   OUT_RING %x\n", (int)(x));		\
+	intel_ring_emit(dev, &dev_priv->render_ring, x);		\
 } while (0)
 
 #define ADVANCE_LP_RING() do {						\
+	drm_i915_private_t *dev_priv = dev->dev_private;                \
 	if (I915_VERBOSE)						\
-		DRM_DEBUG("ADVANCE_LP_RING %x\n", dev_priv->ring.tail);	\
-	I915_WRITE(PRB0_TAIL, dev_priv->ring.tail);			\
+		DRM_DEBUG("ADVANCE_LP_RING %x\n",			\
+				dev_priv->render_ring.tail);		\
+	intel_ring_advance(dev, &dev_priv->render_ring);		\
 } while(0)
 
 /**
@@ -1085,14 +1116,12 @@ extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
  *
  * The area from dword 0x20 to 0x3ff is available for driver usage.
  */
-#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
+#define READ_HWSP(dev_priv, reg)  (((volatile u32 *)\
+			(dev_priv->render_ring.status_page.page_addr))[reg])
 #define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
 #define I915_GEM_HWS_INDEX		0x20
 #define I915_BREADCRUMB_INDEX		0x21
 
-extern int i915_wrap_ring(struct drm_device * dev);
-extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
-
 #define INTEL_INFO(dev)	(((struct drm_i915_private *) (dev)->dev_private)->info)
 
 #define IS_I830(dev)		((dev)->pci_device == 0x3577)
@@ -1138,6 +1167,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 			 (dev)->pci_device == 0x2A42 ||		\
 			 (dev)->pci_device == 0x2E42)
 
+#define HAS_BSD(dev)            (IS_IRONLAKE(dev) || IS_G4X(dev))
 #define I915_NEED_GFX_HWS(dev)	(INTEL_INFO(dev)->need_gfx_hws)
 
 /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 112699f71fa..5aa747fc25a 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -35,8 +35,6 @@
 #include <linux/swap.h>
 #include <linux/pci.h>
 
-#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
-
 static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
@@ -169,7 +167,7 @@ static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
 		obj_priv->tiling_mode != I915_TILING_NONE;
 }
 
-static inline int
+static inline void
 slow_shmem_copy(struct page *dst_page,
 		int dst_offset,
 		struct page *src_page,
@@ -178,25 +176,16 @@ slow_shmem_copy(struct page *dst_page,
 {
 	char *dst_vaddr, *src_vaddr;
 
-	dst_vaddr = kmap_atomic(dst_page, KM_USER0);
-	if (dst_vaddr == NULL)
-		return -ENOMEM;
-
-	src_vaddr = kmap_atomic(src_page, KM_USER1);
-	if (src_vaddr == NULL) {
-		kunmap_atomic(dst_vaddr, KM_USER0);
-		return -ENOMEM;
-	}
+	dst_vaddr = kmap(dst_page);
+	src_vaddr = kmap(src_page);
 
 	memcpy(dst_vaddr + dst_offset, src_vaddr + src_offset, length);
 
-	kunmap_atomic(src_vaddr, KM_USER1);
-	kunmap_atomic(dst_vaddr, KM_USER0);
-
-	return 0;
+	kunmap(src_page);
+	kunmap(dst_page);
 }
 
-static inline int
+static inline void
 slow_shmem_bit17_copy(struct page *gpu_page,
 		      int gpu_offset,
 		      struct page *cpu_page,
@@ -216,15 +205,8 @@ slow_shmem_bit17_copy(struct page *gpu_page,
 					       cpu_page, cpu_offset, length);
 	}
 
-	gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
-	if (gpu_vaddr == NULL)
-		return -ENOMEM;
-
-	cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
-	if (cpu_vaddr == NULL) {
-		kunmap_atomic(gpu_vaddr, KM_USER0);
-		return -ENOMEM;
-	}
+	gpu_vaddr = kmap(gpu_page);
+	cpu_vaddr = kmap(cpu_page);
 
 	/* Copy the data, XORing A6 with A17 (1). The user already knows he's
 	 * XORing with the other bits (A9 for Y, A9 and A10 for X)
@@ -248,10 +230,8 @@ slow_shmem_bit17_copy(struct page *gpu_page,
 		length -= this_length;
 	}
 
-	kunmap_atomic(cpu_vaddr, KM_USER1);
-	kunmap_atomic(gpu_vaddr, KM_USER0);
-
-	return 0;
+	kunmap(cpu_page);
+	kunmap(gpu_page);
 }
 
 /**
@@ -427,21 +407,19 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 			page_length = PAGE_SIZE - data_page_offset;
 
 		if (do_bit17_swizzling) {
-			ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
-						    shmem_page_offset,
-						    user_pages[data_page_index],
-						    data_page_offset,
-						    page_length,
-						    1);
-		} else {
-			ret = slow_shmem_copy(user_pages[data_page_index],
-					      data_page_offset,
-					      obj_priv->pages[shmem_page_index],
+			slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
 					      shmem_page_offset,
-					      page_length);
+					      user_pages[data_page_index],
+					      data_page_offset,
+					      page_length,
+					      1);
+		} else {
+			slow_shmem_copy(user_pages[data_page_index],
+					data_page_offset,
+					obj_priv->pages[shmem_page_index],
+					shmem_page_offset,
+					page_length);
 		}
-		if (ret)
-			goto fail_put_pages;
 
 		remain -= page_length;
 		data_ptr += page_length;
@@ -531,25 +509,24 @@ fast_user_write(struct io_mapping *mapping,
  * page faults
  */
 
-static inline int
+static inline void
 slow_kernel_write(struct io_mapping *mapping,
 		  loff_t gtt_base, int gtt_offset,
 		  struct page *user_page, int user_offset,
 		  int length)
 {
-	char *src_vaddr, *dst_vaddr;
-	unsigned long unwritten;
+	char __iomem *dst_vaddr;
+	char *src_vaddr;
 
-	dst_vaddr = io_mapping_map_atomic_wc(mapping, gtt_base);
-	src_vaddr = kmap_atomic(user_page, KM_USER1);
-	unwritten = __copy_from_user_inatomic_nocache(dst_vaddr + gtt_offset,
-						      src_vaddr + user_offset,
-						      length);
-	kunmap_atomic(src_vaddr, KM_USER1);
-	io_mapping_unmap_atomic(dst_vaddr);
-	if (unwritten)
-		return -EFAULT;
-	return 0;
+	dst_vaddr = io_mapping_map_wc(mapping, gtt_base);
+	src_vaddr = kmap(user_page);
+
+	memcpy_toio(dst_vaddr + gtt_offset,
+		    src_vaddr + user_offset,
+		    length);
+
+	kunmap(user_page);
+	io_mapping_unmap(dst_vaddr);
 }
 
 static inline int
@@ -722,18 +699,11 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 		if ((data_page_offset + page_length) > PAGE_SIZE)
 			page_length = PAGE_SIZE - data_page_offset;
 
-		ret = slow_kernel_write(dev_priv->mm.gtt_mapping,
-					gtt_page_base, gtt_page_offset,
-					user_pages[data_page_index],
-					data_page_offset,
-					page_length);
-
-		/* If we get a fault while copying data, then (presumably) our
-		 * source page isn't available.  Return the error and we'll
-		 * retry in the slow path.
-		 */
-		if (ret)
-			goto out_unpin_object;
+		slow_kernel_write(dev_priv->mm.gtt_mapping,
+				  gtt_page_base, gtt_page_offset,
+				  user_pages[data_page_index],
+				  data_page_offset,
+				  page_length);
 
 		remain -= page_length;
 		offset += page_length;
@@ -902,21 +872,19 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 			page_length = PAGE_SIZE - data_page_offset;
 
 		if (do_bit17_swizzling) {
-			ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
-						    shmem_page_offset,
-						    user_pages[data_page_index],
-						    data_page_offset,
-						    page_length,
-						    0);
-		} else {
-			ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+			slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
 					      shmem_page_offset,
 					      user_pages[data_page_index],
 					      data_page_offset,
-					      page_length);
+					      page_length,
+					      0);
+		} else {
+			slow_shmem_copy(obj_priv->pages[shmem_page_index],
+					shmem_page_offset,
+					user_pages[data_page_index],
+					data_page_offset,
+					page_length);
 		}
-		if (ret)
-			goto fail_put_pages;
 
 		remain -= page_length;
 		data_ptr += page_length;
@@ -973,7 +941,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	if (obj_priv->phys_obj)
 		ret = i915_gem_phys_pwrite(dev, obj, args, file_priv);
 	else if (obj_priv->tiling_mode == I915_TILING_NONE &&
-		 dev->gtt_total != 0) {
+		 dev->gtt_total != 0 &&
+		 obj->write_domain != I915_GEM_DOMAIN_CPU) {
 		ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file_priv);
 		if (ret == -EFAULT) {
 			ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
@@ -1484,11 +1453,14 @@ i915_gem_object_put_pages(struct drm_gem_object *obj)
 }
 
 static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno,
+			       struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = obj->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+	BUG_ON(ring == NULL);
+	obj_priv->ring = ring;
 
 	/* Add a reference if we're newly entering the active list. */
 	if (!obj_priv->active) {
@@ -1497,8 +1469,7 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
 	}
 	/* Move from whatever list we were on to the tail of execution. */
 	spin_lock(&dev_priv->mm.active_list_lock);
-	list_move_tail(&obj_priv->list,
-		       &dev_priv->mm.active_list);
+	list_move_tail(&obj_priv->list, &ring->active_list);
 	spin_unlock(&dev_priv->mm.active_list_lock);
 	obj_priv->last_rendering_seqno = seqno;
 }
@@ -1551,6 +1522,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
 	BUG_ON(!list_empty(&obj_priv->gpu_write_list));
 
 	obj_priv->last_rendering_seqno = 0;
+	obj_priv->ring = NULL;
 	if (obj_priv->active) {
 		obj_priv->active = 0;
 		drm_gem_object_unreference(obj);
@@ -1560,7 +1532,8 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
 
 static void
 i915_gem_process_flushing_list(struct drm_device *dev,
-			       uint32_t flush_domains, uint32_t seqno)
+			       uint32_t flush_domains, uint32_t seqno,
+			       struct intel_ring_buffer *ring)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv, *next;
@@ -1571,12 +1544,13 @@ i915_gem_process_flushing_list(struct drm_device *dev,
 		struct drm_gem_object *obj = &obj_priv->base;
 
 		if ((obj->write_domain & flush_domains) ==
-		    obj->write_domain) {
+		    obj->write_domain &&
+		    obj_priv->ring->ring_flag == ring->ring_flag) {
 			uint32_t old_write_domain = obj->write_domain;
 
 			obj->write_domain = 0;
 			list_del_init(&obj_priv->gpu_write_list);
-			i915_gem_object_move_to_active(obj, seqno);
+			i915_gem_object_move_to_active(obj, seqno, ring);
 
 			/* update the fence lru list */
 			if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
@@ -1593,31 +1567,15 @@ i915_gem_process_flushing_list(struct drm_device *dev,
 	}
 }
 
-#define PIPE_CONTROL_FLUSH(addr)					\
-	OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |		\
-		 PIPE_CONTROL_DEPTH_STALL);				\
-	OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT);			\
-	OUT_RING(0);							\
-	OUT_RING(0);							\
-
-/**
- * Creates a new sequence number, emitting a write of it to the status page
- * plus an interrupt, which will trigger i915_user_interrupt_handler.
- *
- * Must be called with struct_lock held.
- *
- * Returned sequence numbers are nonzero on success.
- */
 uint32_t
 i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
-		 uint32_t flush_domains)
+		 uint32_t flush_domains, struct intel_ring_buffer *ring)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_file_private *i915_file_priv = NULL;
 	struct drm_i915_gem_request *request;
 	uint32_t seqno;
 	int was_empty;
-	RING_LOCALS;
 
 	if (file_priv != NULL)
 		i915_file_priv = file_priv->driver_priv;
@@ -1626,62 +1584,14 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
 	if (request == NULL)
 		return 0;
 
-	/* Grab the seqno we're going to make this request be, and bump the
-	 * next (skipping 0 so it can be the reserved no-seqno value).
-	 */
-	seqno = dev_priv->mm.next_gem_seqno;
-	dev_priv->mm.next_gem_seqno++;
-	if (dev_priv->mm.next_gem_seqno == 0)
-		dev_priv->mm.next_gem_seqno++;
-
-	if (HAS_PIPE_CONTROL(dev)) {
-		u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
-
-		/*
-		 * Workaround qword write incoherence by flushing the
-		 * PIPE_NOTIFY buffers out to memory before requesting
-		 * an interrupt.
-		 */
-		BEGIN_LP_RING(32);
-		OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
-			 PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
-		OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
-		OUT_RING(seqno);
-		OUT_RING(0);
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		scratch_addr += 128; /* write to separate cachelines */
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		scratch_addr += 128;
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		scratch_addr += 128;
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		scratch_addr += 128;
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		scratch_addr += 128;
-		PIPE_CONTROL_FLUSH(scratch_addr);
-		OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
-			 PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
-			 PIPE_CONTROL_NOTIFY);
-		OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
-		OUT_RING(seqno);
-		OUT_RING(0);
-		ADVANCE_LP_RING();
-	} else {
-		BEGIN_LP_RING(4);
-		OUT_RING(MI_STORE_DWORD_INDEX);
-		OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
-		OUT_RING(seqno);
-
-		OUT_RING(MI_USER_INTERRUPT);
-		ADVANCE_LP_RING();
-	}
-
-	DRM_DEBUG_DRIVER("%d\n", seqno);
+	seqno = ring->add_request(dev, ring, file_priv, flush_domains);
 
 	request->seqno = seqno;
+	request->ring = ring;
 	request->emitted_jiffies = jiffies;
-	was_empty = list_empty(&dev_priv->mm.request_list);
-	list_add_tail(&request->list, &dev_priv->mm.request_list);
+	was_empty = list_empty(&ring->request_list);
+	list_add_tail(&request->list, &ring->request_list);
+
 	if (i915_file_priv) {
 		list_add_tail(&request->client_list,
 			      &i915_file_priv->mm.request_list);
@@ -1693,7 +1603,7 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
 	 * domain we're flushing with our flush.
 	 */
 	if (flush_domains != 0) 
-		i915_gem_process_flushing_list(dev, flush_domains, seqno);
+		i915_gem_process_flushing_list(dev, flush_domains, seqno, ring);
 
 	if (!dev_priv->mm.suspended) {
 		mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
@@ -1710,20 +1620,16 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
  * before signalling the CPU
  */
 static uint32_t
-i915_retire_commands(struct drm_device *dev)
+i915_retire_commands(struct drm_device *dev, struct intel_ring_buffer *ring)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
 	uint32_t flush_domains = 0;
-	RING_LOCALS;
 
 	/* The sampler always gets flushed on i965 (sigh) */
 	if (IS_I965G(dev))
 		flush_domains |= I915_GEM_DOMAIN_SAMPLER;
-	BEGIN_LP_RING(2);
-	OUT_RING(cmd);
-	OUT_RING(0); /* noop */
-	ADVANCE_LP_RING();
+
+	ring->flush(dev, ring,
+			I915_GEM_DOMAIN_COMMAND, flush_domains);
 	return flush_domains;
 }
 
@@ -1743,11 +1649,11 @@ i915_gem_retire_request(struct drm_device *dev,
 	 * by the ringbuffer to the flushing/inactive lists as appropriate.
 	 */
 	spin_lock(&dev_priv->mm.active_list_lock);
-	while (!list_empty(&dev_priv->mm.active_list)) {
+	while (!list_empty(&request->ring->active_list)) {
 		struct drm_gem_object *obj;
 		struct drm_i915_gem_object *obj_priv;
 
-		obj_priv = list_first_entry(&dev_priv->mm.active_list,
+		obj_priv = list_first_entry(&request->ring->active_list,
 					    struct drm_i915_gem_object,
 					    list);
 		obj = &obj_priv->base;
@@ -1794,35 +1700,33 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
 }
 
 uint32_t
-i915_get_gem_seqno(struct drm_device *dev)
+i915_get_gem_seqno(struct drm_device *dev,
+		   struct intel_ring_buffer *ring)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
-
-	if (HAS_PIPE_CONTROL(dev))
-		return ((volatile u32 *)(dev_priv->seqno_page))[0];
-	else
-		return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
+	return ring->get_gem_seqno(dev, ring);
 }
 
 /**
  * This function clears the request list as sequence numbers are passed.
  */
 void
-i915_gem_retire_requests(struct drm_device *dev)
+i915_gem_retire_requests(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	uint32_t seqno;
 
-	if (!dev_priv->hw_status_page || list_empty(&dev_priv->mm.request_list))
+	if (!ring->status_page.page_addr
+			|| list_empty(&ring->request_list))
 		return;
 
-	seqno = i915_get_gem_seqno(dev);
+	seqno = i915_get_gem_seqno(dev, ring);
 
-	while (!list_empty(&dev_priv->mm.request_list)) {
+	while (!list_empty(&ring->request_list)) {
 		struct drm_i915_gem_request *request;
 		uint32_t retiring_seqno;
 
-		request = list_first_entry(&dev_priv->mm.request_list,
+		request = list_first_entry(&ring->request_list,
 					   struct drm_i915_gem_request,
 					   list);
 		retiring_seqno = request->seqno;
@@ -1840,7 +1744,8 @@ i915_gem_retire_requests(struct drm_device *dev)
 
 	if (unlikely (dev_priv->trace_irq_seqno &&
 		      i915_seqno_passed(dev_priv->trace_irq_seqno, seqno))) {
-		i915_user_irq_put(dev);
+
+		ring->user_irq_put(dev, ring);
 		dev_priv->trace_irq_seqno = 0;
 	}
 }
@@ -1856,15 +1761,22 @@ i915_gem_retire_work_handler(struct work_struct *work)
 	dev = dev_priv->dev;
 
 	mutex_lock(&dev->struct_mutex);
-	i915_gem_retire_requests(dev);
+	i915_gem_retire_requests(dev, &dev_priv->render_ring);
+
+	if (HAS_BSD(dev))
+		i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
+
 	if (!dev_priv->mm.suspended &&
-	    !list_empty(&dev_priv->mm.request_list))
+		(!list_empty(&dev_priv->render_ring.request_list) ||
+			(HAS_BSD(dev) &&
+			 !list_empty(&dev_priv->bsd_ring.request_list))))
 		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
 	mutex_unlock(&dev->struct_mutex);
 }
 
 int
-i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
+i915_do_wait_request(struct drm_device *dev, uint32_t seqno,
+		int interruptible, struct intel_ring_buffer *ring)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 ier;
@@ -1875,7 +1787,7 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
 	if (atomic_read(&dev_priv->mm.wedged))
 		return -EIO;
 
-	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+	if (!i915_seqno_passed(ring->get_gem_seqno(dev, ring), seqno)) {
 		if (HAS_PCH_SPLIT(dev))
 			ier = I915_READ(DEIER) | I915_READ(GTIER);
 		else
@@ -1889,19 +1801,21 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
 
 		trace_i915_gem_request_wait_begin(dev, seqno);
 
-		dev_priv->mm.waiting_gem_seqno = seqno;
-		i915_user_irq_get(dev);
+		ring->waiting_gem_seqno = seqno;
+		ring->user_irq_get(dev, ring);
 		if (interruptible)
-			ret = wait_event_interruptible(dev_priv->irq_queue,
-				i915_seqno_passed(i915_get_gem_seqno(dev), seqno) ||
-				atomic_read(&dev_priv->mm.wedged));
+			ret = wait_event_interruptible(ring->irq_queue,
+				i915_seqno_passed(
+					ring->get_gem_seqno(dev, ring), seqno)
+				|| atomic_read(&dev_priv->mm.wedged));
 		else
-			wait_event(dev_priv->irq_queue,
-				i915_seqno_passed(i915_get_gem_seqno(dev), seqno) ||
-				atomic_read(&dev_priv->mm.wedged));
+			wait_event(ring->irq_queue,
+				i915_seqno_passed(
+					ring->get_gem_seqno(dev, ring), seqno)
+				|| atomic_read(&dev_priv->mm.wedged));
 
-		i915_user_irq_put(dev);
-		dev_priv->mm.waiting_gem_seqno = 0;
+		ring->user_irq_put(dev, ring);
+		ring->waiting_gem_seqno = 0;
 
 		trace_i915_gem_request_wait_end(dev, seqno);
 	}
@@ -1910,7 +1824,7 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
 
 	if (ret && ret != -ERESTARTSYS)
 		DRM_ERROR("%s returns %d (awaiting %d at %d)\n",
-			  __func__, ret, seqno, i915_get_gem_seqno(dev));
+			  __func__, ret, seqno, ring->get_gem_seqno(dev, ring));
 
 	/* Directly dispatch request retiring.  While we have the work queue
 	 * to handle this, the waiter on a request often wants an associated
@@ -1918,7 +1832,7 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
 	 * a separate wait queue to handle that.
 	 */
 	if (ret == 0)
-		i915_gem_retire_requests(dev);
+		i915_gem_retire_requests(dev, ring);
 
 	return ret;
 }
@@ -1928,9 +1842,10 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
  * request and object lists appropriately for that event.
  */
 static int
-i915_wait_request(struct drm_device *dev, uint32_t seqno)
+i915_wait_request(struct drm_device *dev, uint32_t seqno,
+		struct intel_ring_buffer *ring)
 {
-	return i915_do_wait_request(dev, seqno, 1);
+	return i915_do_wait_request(dev, seqno, 1, ring);
 }
 
 static void
@@ -1939,71 +1854,29 @@ i915_gem_flush(struct drm_device *dev,
 	       uint32_t flush_domains)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t cmd;
-	RING_LOCALS;
-
-#if WATCH_EXEC
-	DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
-		  invalidate_domains, flush_domains);
-#endif
-	trace_i915_gem_request_flush(dev, dev_priv->mm.next_gem_seqno,
-				     invalidate_domains, flush_domains);
-
 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		drm_agp_chipset_flush(dev);
+	dev_priv->render_ring.flush(dev, &dev_priv->render_ring,
+			invalidate_domains,
+			flush_domains);
+
+	if (HAS_BSD(dev))
+		dev_priv->bsd_ring.flush(dev, &dev_priv->bsd_ring,
+				invalidate_domains,
+				flush_domains);
+}
 
-	if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
-		/*
-		 * read/write caches:
-		 *
-		 * I915_GEM_DOMAIN_RENDER is always invalidated, but is
-		 * only flushed if MI_NO_WRITE_FLUSH is unset.  On 965, it is
-		 * also flushed at 2d versus 3d pipeline switches.
-		 *
-		 * read-only caches:
-		 *
-		 * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
-		 * MI_READ_FLUSH is set, and is always flushed on 965.
-		 *
-		 * I915_GEM_DOMAIN_COMMAND may not exist?
-		 *
-		 * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
-		 * invalidated when MI_EXE_FLUSH is set.
-		 *
-		 * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
-		 * invalidated with every MI_FLUSH.
-		 *
-		 * TLBs:
-		 *
-		 * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
-		 * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
-		 * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
-		 * are flushed at any MI_FLUSH.
-		 */
-
-		cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
-		if ((invalidate_domains|flush_domains) &
-		    I915_GEM_DOMAIN_RENDER)
-			cmd &= ~MI_NO_WRITE_FLUSH;
-		if (!IS_I965G(dev)) {
-			/*
-			 * On the 965, the sampler cache always gets flushed
-			 * and this bit is reserved.
-			 */
-			if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
-				cmd |= MI_READ_FLUSH;
-		}
-		if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
-			cmd |= MI_EXE_FLUSH;
-
-#if WATCH_EXEC
-		DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
-#endif
-		BEGIN_LP_RING(2);
-		OUT_RING(cmd);
-		OUT_RING(MI_NOOP);
-		ADVANCE_LP_RING();
-	}
+static void
+i915_gem_flush_ring(struct drm_device *dev,
+	       uint32_t invalidate_domains,
+	       uint32_t flush_domains,
+	       struct intel_ring_buffer *ring)
+{
+	if (flush_domains & I915_GEM_DOMAIN_CPU)
+		drm_agp_chipset_flush(dev);
+	ring->flush(dev, ring,
+			invalidate_domains,
+			flush_domains);
 }
 
 /**
@@ -2030,7 +1903,8 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj)
 		DRM_INFO("%s: object %p wait for seqno %08x\n",
 			  __func__, obj, obj_priv->last_rendering_seqno);
 #endif
-		ret = i915_wait_request(dev, obj_priv->last_rendering_seqno);
+		ret = i915_wait_request(dev,
+				obj_priv->last_rendering_seqno, obj_priv->ring);
 		if (ret != 0)
 			return ret;
 	}
@@ -2146,11 +2020,14 @@ i915_gpu_idle(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	bool lists_empty;
-	uint32_t seqno;
+	uint32_t seqno1, seqno2;
+	int ret;
 
 	spin_lock(&dev_priv->mm.active_list_lock);
-	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
-		      list_empty(&dev_priv->mm.active_list);
+	lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
+		       list_empty(&dev_priv->render_ring.active_list) &&
+		       (!HAS_BSD(dev) ||
+			list_empty(&dev_priv->bsd_ring.active_list)));
 	spin_unlock(&dev_priv->mm.active_list_lock);
 
 	if (lists_empty)
@@ -2158,11 +2035,25 @@ i915_gpu_idle(struct drm_device *dev)
 
 	/* Flush everything onto the inactive list. */
 	i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
-	seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
-	if (seqno == 0)
+	seqno1 = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS,
+			&dev_priv->render_ring);
+	if (seqno1 == 0)
 		return -ENOMEM;
+	ret = i915_wait_request(dev, seqno1, &dev_priv->render_ring);
 
-	return i915_wait_request(dev, seqno);
+	if (HAS_BSD(dev)) {
+		seqno2 = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS,
+				&dev_priv->bsd_ring);
+		if (seqno2 == 0)
+			return -ENOMEM;
+
+		ret = i915_wait_request(dev, seqno2, &dev_priv->bsd_ring);
+		if (ret)
+			return ret;
+	}
+
+
+	return ret;
 }
 
 static int
@@ -2175,7 +2066,9 @@ i915_gem_evict_everything(struct drm_device *dev)
 	spin_lock(&dev_priv->mm.active_list_lock);
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->mm.active_list));
+		       list_empty(&dev_priv->render_ring.active_list) &&
+		       (!HAS_BSD(dev)
+			|| list_empty(&dev_priv->bsd_ring.active_list)));
 	spin_unlock(&dev_priv->mm.active_list_lock);
 
 	if (lists_empty)
@@ -2195,7 +2088,9 @@ i915_gem_evict_everything(struct drm_device *dev)
 	spin_lock(&dev_priv->mm.active_list_lock);
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->mm.active_list));
+		       list_empty(&dev_priv->render_ring.active_list) &&
+		       (!HAS_BSD(dev)
+			|| list_empty(&dev_priv->bsd_ring.active_list)));
 	spin_unlock(&dev_priv->mm.active_list_lock);
 	BUG_ON(!lists_empty);
 
@@ -2209,8 +2104,13 @@ i915_gem_evict_something(struct drm_device *dev, int min_size)
 	struct drm_gem_object *obj;
 	int ret;
 
+	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
+	struct intel_ring_buffer *bsd_ring = &dev_priv->bsd_ring;
 	for (;;) {
-		i915_gem_retire_requests(dev);
+		i915_gem_retire_requests(dev, render_ring);
+
+		if (HAS_BSD(dev))
+			i915_gem_retire_requests(dev, bsd_ring);
 
 		/* If there's an inactive buffer available now, grab it
 		 * and be done.
@@ -2234,14 +2134,30 @@ i915_gem_evict_something(struct drm_device *dev, int min_size)
 		 * things, wait for the next to finish and hopefully leave us
 		 * a buffer to evict.
 		 */
-		if (!list_empty(&dev_priv->mm.request_list)) {
+		if (!list_empty(&render_ring->request_list)) {
 			struct drm_i915_gem_request *request;
 
-			request = list_first_entry(&dev_priv->mm.request_list,
+			request = list_first_entry(&render_ring->request_list,
 						   struct drm_i915_gem_request,
 						   list);
 
-			ret = i915_wait_request(dev, request->seqno);
+			ret = i915_wait_request(dev,
+					request->seqno, request->ring);
+			if (ret)
+				return ret;
+
+			continue;
+		}
+
+		if (HAS_BSD(dev) && !list_empty(&bsd_ring->request_list)) {
+			struct drm_i915_gem_request *request;
+
+			request = list_first_entry(&bsd_ring->request_list,
+						   struct drm_i915_gem_request,
+						   list);
+
+			ret = i915_wait_request(dev,
+					request->seqno, request->ring);
 			if (ret)
 				return ret;
 
@@ -2268,10 +2184,13 @@ i915_gem_evict_something(struct drm_device *dev, int min_size)
 			if (obj != NULL) {
 				uint32_t seqno;
 
-				i915_gem_flush(dev,
+				i915_gem_flush_ring(dev,
+					       obj->write_domain,
 					       obj->write_domain,
-					       obj->write_domain);
-				seqno = i915_add_request(dev, NULL, obj->write_domain);
+					       obj_priv->ring);
+				seqno = i915_add_request(dev, NULL,
+						obj->write_domain,
+						obj_priv->ring);
 				if (seqno == 0)
 					return -ENOMEM;
 				continue;
@@ -2299,6 +2218,9 @@ i915_gem_object_get_pages(struct drm_gem_object *obj,
 	struct inode *inode;
 	struct page *page;
 
+	BUG_ON(obj_priv->pages_refcount
+			== DRM_I915_GEM_OBJECT_MAX_PAGES_REFCOUNT);
+
 	if (obj_priv->pages_refcount++ != 0)
 		return 0;
 
@@ -2317,8 +2239,9 @@ i915_gem_object_get_pages(struct drm_gem_object *obj,
 	mapping = inode->i_mapping;
 	for (i = 0; i < page_count; i++) {
 		page = read_cache_page_gfp(mapping, i,
-					   mapping_gfp_mask (mapping) |
+					   GFP_HIGHUSER |
 					   __GFP_COLD |
+					   __GFP_RECLAIMABLE |
 					   gfpmask);
 		if (IS_ERR(page))
 			goto err_pages;
@@ -2697,6 +2620,14 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 		return -EINVAL;
 	}
 
+	/* If the object is bigger than the entire aperture, reject it early
+	 * before evicting everything in a vain attempt to find space.
+	 */
+	if (obj->size > dev->gtt_total) {
+		DRM_ERROR("Attempting to bind an object larger than the aperture\n");
+		return -E2BIG;
+	}
+
  search_free:
 	free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
 					obj->size, alignment, 0);
@@ -2807,6 +2738,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
 	uint32_t old_write_domain;
+	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
 
 	if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
 		return;
@@ -2814,7 +2746,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 	/* Queue the GPU write cache flushing we need. */
 	old_write_domain = obj->write_domain;
 	i915_gem_flush(dev, 0, obj->write_domain);
-	(void) i915_add_request(dev, NULL, obj->write_domain);
+	(void) i915_add_request(dev, NULL, obj->write_domain, obj_priv->ring);
 	BUG_ON(obj->write_domain);
 
 	trace_i915_gem_object_change_domain(obj,
@@ -2954,23 +2886,24 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
 		DRM_INFO("%s: object %p wait for seqno %08x\n",
 			  __func__, obj, obj_priv->last_rendering_seqno);
 #endif
-		ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+		ret = i915_do_wait_request(dev,
+				obj_priv->last_rendering_seqno,
+				0,
+				obj_priv->ring);
 		if (ret != 0)
 			return ret;
 	}
 
+	i915_gem_object_flush_cpu_write_domain(obj);
+
 	old_write_domain = obj->write_domain;
 	old_read_domains = obj->read_domains;
 
-	obj->read_domains &= I915_GEM_DOMAIN_GTT;
-
-	i915_gem_object_flush_cpu_write_domain(obj);
-
 	/* It should now be out of any other write domains, and we can update
 	 * the domain values for our changes.
 	 */
 	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
-	obj->read_domains |= I915_GEM_DOMAIN_GTT;
+	obj->read_domains = I915_GEM_DOMAIN_GTT;
 	obj->write_domain = I915_GEM_DOMAIN_GTT;
 	obj_priv->dirty = 1;
 
@@ -3354,9 +3287,13 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 	             obj_priv->tiling_mode != I915_TILING_NONE;
 
 	/* Check fence reg constraints and rebind if necessary */
-	if (need_fence && !i915_gem_object_fence_offset_ok(obj,
-	    obj_priv->tiling_mode))
-		i915_gem_object_unbind(obj);
+	if (need_fence &&
+	    !i915_gem_object_fence_offset_ok(obj,
+					     obj_priv->tiling_mode)) {
+		ret = i915_gem_object_unbind(obj);
+		if (ret)
+			return ret;
+	}
 
 	/* Choose the GTT offset for our buffer and put it there. */
 	ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
@@ -3370,9 +3307,6 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 	if (need_fence) {
 		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret != 0) {
-			if (ret != -EBUSY && ret != -ERESTARTSYS)
-				DRM_ERROR("Failure to install fence: %d\n",
-					  ret);
 			i915_gem_object_unpin(obj);
 			return ret;
 		}
@@ -3545,62 +3479,6 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 	return 0;
 }
 
-/** Dispatch a batchbuffer to the ring
- */
-static int
-i915_dispatch_gem_execbuffer(struct drm_device *dev,
-			      struct drm_i915_gem_execbuffer2 *exec,
-			      struct drm_clip_rect *cliprects,
-			      uint64_t exec_offset)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	int nbox = exec->num_cliprects;
-	int i = 0, count;
-	uint32_t exec_start, exec_len;
-	RING_LOCALS;
-
-	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
-	exec_len = (uint32_t) exec->batch_len;
-
-	trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
-
-	count = nbox ? nbox : 1;
-
-	for (i = 0; i < count; i++) {
-		if (i < nbox) {
-			int ret = i915_emit_box(dev, cliprects, i,
-						exec->DR1, exec->DR4);
-			if (ret)
-				return ret;
-		}
-
-		if (IS_I830(dev) || IS_845G(dev)) {
-			BEGIN_LP_RING(4);
-			OUT_RING(MI_BATCH_BUFFER);
-			OUT_RING(exec_start | MI_BATCH_NON_SECURE);
-			OUT_RING(exec_start + exec_len - 4);
-			OUT_RING(0);
-			ADVANCE_LP_RING();
-		} else {
-			BEGIN_LP_RING(2);
-			if (IS_I965G(dev)) {
-				OUT_RING(MI_BATCH_BUFFER_START |
-					 (2 << 6) |
-					 MI_BATCH_NON_SECURE_I965);
-				OUT_RING(exec_start);
-			} else {
-				OUT_RING(MI_BATCH_BUFFER_START |
-					 (2 << 6));
-				OUT_RING(exec_start | MI_BATCH_NON_SECURE);
-			}
-			ADVANCE_LP_RING();
-		}
-	}
-
-	/* XXX breadcrumb */
-	return 0;
-}
-
 /* Throttle our rendering by waiting until the ring has completed our requests
  * emitted over 20 msec ago.
  *
@@ -3629,7 +3507,7 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv)
 		if (time_after_eq(request->emitted_jiffies, recent_enough))
 			break;
 
-		ret = i915_wait_request(dev, request->seqno);
+		ret = i915_wait_request(dev, request->seqno, request->ring);
 		if (ret != 0)
 			break;
 	}
@@ -3769,6 +3647,7 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev,
 	return ret;
 }
 
+
 int
 i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv,
@@ -3786,10 +3665,22 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	uint32_t seqno, flush_domains, reloc_index;
 	int pin_tries, flips;
 
+	struct intel_ring_buffer *ring = NULL;
+
 #if WATCH_EXEC
 	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
 		  (int) args->buffers_ptr, args->buffer_count, args->batch_len);
 #endif
+	if (args->flags & I915_EXEC_BSD) {
+		if (!HAS_BSD(dev)) {
+			DRM_ERROR("execbuf with wrong flag\n");
+			return -EINVAL;
+		}
+		ring = &dev_priv->bsd_ring;
+	} else {
+		ring = &dev_priv->render_ring;
+	}
+
 
 	if (args->buffer_count < 1) {
 		DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
@@ -3902,11 +3793,19 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		if (ret != -ENOSPC || pin_tries >= 1) {
 			if (ret != -ERESTARTSYS) {
 				unsigned long long total_size = 0;
-				for (i = 0; i < args->buffer_count; i++)
+				int num_fences = 0;
+				for (i = 0; i < args->buffer_count; i++) {
+					obj_priv = to_intel_bo(object_list[i]);
+
 					total_size += object_list[i]->size;
-				DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes: %d\n",
+					num_fences +=
+						exec_list[i].flags & EXEC_OBJECT_NEEDS_FENCE &&
+						obj_priv->tiling_mode != I915_TILING_NONE;
+				}
+				DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes, %d fences: %d\n",
 					  pinned+1, args->buffer_count,
-					  total_size, ret);
+					  total_size, num_fences,
+					  ret);
 				DRM_ERROR("%d objects [%d pinned], "
 					  "%d object bytes [%d pinned], "
 					  "%d/%d gtt bytes\n",
@@ -3976,9 +3875,16 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		i915_gem_flush(dev,
 			       dev->invalidate_domains,
 			       dev->flush_domains);
-		if (dev->flush_domains & I915_GEM_GPU_DOMAINS)
+		if (dev->flush_domains & I915_GEM_GPU_DOMAINS) {
 			(void)i915_add_request(dev, file_priv,
-					       dev->flush_domains);
+					dev->flush_domains,
+					&dev_priv->render_ring);
+
+			if (HAS_BSD(dev))
+				(void)i915_add_request(dev, file_priv,
+						dev->flush_domains,
+						&dev_priv->bsd_ring);
+		}
 	}
 
 	for (i = 0; i < args->buffer_count; i++) {
@@ -4015,7 +3921,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 #endif
 
 	/* Exec the batchbuffer */
-	ret = i915_dispatch_gem_execbuffer(dev, args, cliprects, exec_offset);
+	ret = ring->dispatch_gem_execbuffer(dev, ring, args,
+			cliprects, exec_offset);
 	if (ret) {
 		DRM_ERROR("dispatch failed %d\n", ret);
 		goto err;
@@ -4025,7 +3932,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	 * Ensure that the commands in the batch buffer are
 	 * finished before the interrupt fires
 	 */
-	flush_domains = i915_retire_commands(dev);
+	flush_domains = i915_retire_commands(dev, ring);
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
@@ -4036,12 +3943,13 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	 * *some* interrupts representing completion of buffers that we can
 	 * wait on when trying to clear up gtt space).
 	 */
-	seqno = i915_add_request(dev, file_priv, flush_domains);
+	seqno = i915_add_request(dev, file_priv, flush_domains, ring);
 	BUG_ON(seqno == 0);
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
+		obj_priv = to_intel_bo(obj);
 
-		i915_gem_object_move_to_active(obj, seqno);
+		i915_gem_object_move_to_active(obj, seqno, ring);
 #if WATCH_LRU
 		DRM_INFO("%s: move to exec list %p\n", __func__, obj);
 #endif
@@ -4153,7 +4061,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	exec2.DR4 = args->DR4;
 	exec2.num_cliprects = args->num_cliprects;
 	exec2.cliprects_ptr = args->cliprects_ptr;
-	exec2.flags = 0;
+	exec2.flags = I915_EXEC_RENDER;
 
 	ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
 	if (!ret) {
@@ -4239,7 +4147,20 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
 	int ret;
 
+	BUG_ON(obj_priv->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+
 	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	if (obj_priv->gtt_space != NULL) {
+		if (alignment == 0)
+			alignment = i915_gem_get_gtt_alignment(obj);
+		if (obj_priv->gtt_offset & (alignment - 1)) {
+			ret = i915_gem_object_unbind(obj);
+			if (ret)
+				return ret;
+		}
+	}
+
 	if (obj_priv->gtt_space == NULL) {
 		ret = i915_gem_object_bind_to_gtt(obj, alignment);
 		if (ret)
@@ -4392,6 +4313,7 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_busy *args = data;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL) {
@@ -4406,7 +4328,10 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	 * actually unmasked, and our working set ends up being larger than
 	 * required.
 	 */
-	i915_gem_retire_requests(dev);
+	i915_gem_retire_requests(dev, &dev_priv->render_ring);
+
+	if (HAS_BSD(dev))
+		i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
 
 	obj_priv = to_intel_bo(obj);
 	/* Don't count being on the flushing list against the object being
@@ -4573,7 +4498,10 @@ i915_gem_idle(struct drm_device *dev)
 
 	mutex_lock(&dev->struct_mutex);
 
-	if (dev_priv->mm.suspended || dev_priv->ring.ring_obj == NULL) {
+	if (dev_priv->mm.suspended ||
+			(dev_priv->render_ring.gem_object == NULL) ||
+			(HAS_BSD(dev) &&
+			 dev_priv->bsd_ring.gem_object == NULL)) {
 		mutex_unlock(&dev->struct_mutex);
 		return 0;
 	}
@@ -4654,71 +4582,6 @@ err:
 	return ret;
 }
 
-static int
-i915_gem_init_hws(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_gem_object *obj;
-	struct drm_i915_gem_object *obj_priv;
-	int ret;
-
-	/* If we need a physical address for the status page, it's already
-	 * initialized at driver load time.
-	 */
-	if (!I915_NEED_GFX_HWS(dev))
-		return 0;
-
-	obj = i915_gem_alloc_object(dev, 4096);
-	if (obj == NULL) {
-		DRM_ERROR("Failed to allocate status page\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-	obj_priv = to_intel_bo(obj);
-	obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
-
-	ret = i915_gem_object_pin(obj, 4096);
-	if (ret != 0) {
-		drm_gem_object_unreference(obj);
-		goto err_unref;
-	}
-
-	dev_priv->status_gfx_addr = obj_priv->gtt_offset;
-
-	dev_priv->hw_status_page = kmap(obj_priv->pages[0]);
-	if (dev_priv->hw_status_page == NULL) {
-		DRM_ERROR("Failed to map status page.\n");
-		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
-		ret = -EINVAL;
-		goto err_unpin;
-	}
-
-	if (HAS_PIPE_CONTROL(dev)) {
-		ret = i915_gem_init_pipe_control(dev);
-		if (ret)
-			goto err_unpin;
-	}
-
-	dev_priv->hws_obj = obj;
-	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
-	if (IS_GEN6(dev)) {
-		I915_WRITE(HWS_PGA_GEN6, dev_priv->status_gfx_addr);
-		I915_READ(HWS_PGA_GEN6); /* posting read */
-	} else {
-		I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
-		I915_READ(HWS_PGA); /* posting read */
-	}
-	DRM_DEBUG_DRIVER("hws offset: 0x%08x\n", dev_priv->status_gfx_addr);
-
-	return 0;
-
-err_unpin:
-	i915_gem_object_unpin(obj);
-err_unref:
-	drm_gem_object_unreference(obj);
-err:
-	return 0;
-}
 
 static void
 i915_gem_cleanup_pipe_control(struct drm_device *dev)
@@ -4737,146 +4600,46 @@ i915_gem_cleanup_pipe_control(struct drm_device *dev)
 	dev_priv->seqno_page = NULL;
 }
 
-static void
-i915_gem_cleanup_hws(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_gem_object *obj;
-	struct drm_i915_gem_object *obj_priv;
-
-	if (dev_priv->hws_obj == NULL)
-		return;
-
-	obj = dev_priv->hws_obj;
-	obj_priv = to_intel_bo(obj);
-
-	kunmap(obj_priv->pages[0]);
-	i915_gem_object_unpin(obj);
-	drm_gem_object_unreference(obj);
-	dev_priv->hws_obj = NULL;
-
-	memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
-	dev_priv->hw_status_page = NULL;
-
-	if (HAS_PIPE_CONTROL(dev))
-		i915_gem_cleanup_pipe_control(dev);
-
-	/* Write high address into HWS_PGA when disabling. */
-	I915_WRITE(HWS_PGA, 0x1ffff000);
-}
-
 int
 i915_gem_init_ringbuffer(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_gem_object *obj;
-	struct drm_i915_gem_object *obj_priv;
-	drm_i915_ring_buffer_t *ring = &dev_priv->ring;
 	int ret;
-	u32 head;
 
-	ret = i915_gem_init_hws(dev);
-	if (ret != 0)
-		return ret;
+	dev_priv->render_ring = render_ring;
 
-	obj = i915_gem_alloc_object(dev, 128 * 1024);
-	if (obj == NULL) {
-		DRM_ERROR("Failed to allocate ringbuffer\n");
-		i915_gem_cleanup_hws(dev);
-		return -ENOMEM;
+	if (!I915_NEED_GFX_HWS(dev)) {
+		dev_priv->render_ring.status_page.page_addr
+			= dev_priv->status_page_dmah->vaddr;
+		memset(dev_priv->render_ring.status_page.page_addr,
+				0, PAGE_SIZE);
 	}
-	obj_priv = to_intel_bo(obj);
 
-	ret = i915_gem_object_pin(obj, 4096);
-	if (ret != 0) {
-		drm_gem_object_unreference(obj);
-		i915_gem_cleanup_hws(dev);
-		return ret;
-	}
-
-	/* Set up the kernel mapping for the ring. */
-	ring->Size = obj->size;
-
-	ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
-	ring->map.size = obj->size;
-	ring->map.type = 0;
-	ring->map.flags = 0;
-	ring->map.mtrr = 0;
-
-	drm_core_ioremap_wc(&ring->map, dev);
-	if (ring->map.handle == NULL) {
-		DRM_ERROR("Failed to map ringbuffer.\n");
-		memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
-		i915_gem_object_unpin(obj);
-		drm_gem_object_unreference(obj);
-		i915_gem_cleanup_hws(dev);
-		return -EINVAL;
-	}
-	ring->ring_obj = obj;
-	ring->virtual_start = ring->map.handle;
-
-	/* Stop the ring if it's running. */
-	I915_WRITE(PRB0_CTL, 0);
-	I915_WRITE(PRB0_TAIL, 0);
-	I915_WRITE(PRB0_HEAD, 0);
-
-	/* Initialize the ring. */
-	I915_WRITE(PRB0_START, obj_priv->gtt_offset);
-	head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-
-	/* G45 ring initialization fails to reset head to zero */
-	if (head != 0) {
-		DRM_ERROR("Ring head not reset to zero "
-			  "ctl %08x head %08x tail %08x start %08x\n",
-			  I915_READ(PRB0_CTL),
-			  I915_READ(PRB0_HEAD),
-			  I915_READ(PRB0_TAIL),
-			  I915_READ(PRB0_START));
-		I915_WRITE(PRB0_HEAD, 0);
-
-		DRM_ERROR("Ring head forced to zero "
-			  "ctl %08x head %08x tail %08x start %08x\n",
-			  I915_READ(PRB0_CTL),
-			  I915_READ(PRB0_HEAD),
-			  I915_READ(PRB0_TAIL),
-			  I915_READ(PRB0_START));
-	}
-
-	I915_WRITE(PRB0_CTL,
-		   ((obj->size - 4096) & RING_NR_PAGES) |
-		   RING_NO_REPORT |
-		   RING_VALID);
-
-	head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-
-	/* If the head is still not zero, the ring is dead */
-	if (head != 0) {
-		DRM_ERROR("Ring initialization failed "
-			  "ctl %08x head %08x tail %08x start %08x\n",
-			  I915_READ(PRB0_CTL),
-			  I915_READ(PRB0_HEAD),
-			  I915_READ(PRB0_TAIL),
-			  I915_READ(PRB0_START));
-		return -EIO;
+	if (HAS_PIPE_CONTROL(dev)) {
+		ret = i915_gem_init_pipe_control(dev);
+		if (ret)
+			return ret;
 	}
 
-	/* Update our cache of the ring state */
-	if (!drm_core_check_feature(dev, DRIVER_MODESET))
-		i915_kernel_lost_context(dev);
-	else {
-		ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-		ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
-		ring->space = ring->head - (ring->tail + 8);
-		if (ring->space < 0)
-			ring->space += ring->Size;
-	}
+	ret = intel_init_ring_buffer(dev, &dev_priv->render_ring);
+	if (ret)
+		goto cleanup_pipe_control;
 
-	if (IS_I9XX(dev) && !IS_GEN3(dev)) {
-		I915_WRITE(MI_MODE,
-			   (VS_TIMER_DISPATCH) << 16 | VS_TIMER_DISPATCH);
+	if (HAS_BSD(dev)) {
+		dev_priv->bsd_ring = bsd_ring;
+		ret = intel_init_ring_buffer(dev, &dev_priv->bsd_ring);
+		if (ret)
+			goto cleanup_render_ring;
 	}
 
 	return 0;
+
+cleanup_render_ring:
+	intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+cleanup_pipe_control:
+	if (HAS_PIPE_CONTROL(dev))
+		i915_gem_cleanup_pipe_control(dev);
+	return ret;
 }
 
 void
@@ -4884,17 +4647,11 @@ i915_gem_cleanup_ringbuffer(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
-	if (dev_priv->ring.ring_obj == NULL)
-		return;
-
-	drm_core_ioremapfree(&dev_priv->ring.map, dev);
-
-	i915_gem_object_unpin(dev_priv->ring.ring_obj);
-	drm_gem_object_unreference(dev_priv->ring.ring_obj);
-	dev_priv->ring.ring_obj = NULL;
-	memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
-
-	i915_gem_cleanup_hws(dev);
+	intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+	if (HAS_BSD(dev))
+		intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring);
+	if (HAS_PIPE_CONTROL(dev))
+		i915_gem_cleanup_pipe_control(dev);
 }
 
 int
@@ -4922,12 +4679,14 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
 	}
 
 	spin_lock(&dev_priv->mm.active_list_lock);
-	BUG_ON(!list_empty(&dev_priv->mm.active_list));
+	BUG_ON(!list_empty(&dev_priv->render_ring.active_list));
+	BUG_ON(HAS_BSD(dev) && !list_empty(&dev_priv->bsd_ring.active_list));
 	spin_unlock(&dev_priv->mm.active_list_lock);
 
 	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
 	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
-	BUG_ON(!list_empty(&dev_priv->mm.request_list));
+	BUG_ON(!list_empty(&dev_priv->render_ring.request_list));
+	BUG_ON(HAS_BSD(dev) && !list_empty(&dev_priv->bsd_ring.request_list));
 	mutex_unlock(&dev->struct_mutex);
 
 	drm_irq_install(dev);
@@ -4966,22 +4725,34 @@ i915_gem_load(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	spin_lock_init(&dev_priv->mm.active_list_lock);
-	INIT_LIST_HEAD(&dev_priv->mm.active_list);
 	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
 	INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
-	INIT_LIST_HEAD(&dev_priv->mm.request_list);
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
+	INIT_LIST_HEAD(&dev_priv->render_ring.active_list);
+	INIT_LIST_HEAD(&dev_priv->render_ring.request_list);
+	if (HAS_BSD(dev)) {
+		INIT_LIST_HEAD(&dev_priv->bsd_ring.active_list);
+		INIT_LIST_HEAD(&dev_priv->bsd_ring.request_list);
+	}
 	for (i = 0; i < 16; i++)
 		INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
-	dev_priv->mm.next_gem_seqno = 1;
-
 	spin_lock(&shrink_list_lock);
 	list_add(&dev_priv->mm.shrink_list, &shrink_list);
 	spin_unlock(&shrink_list_lock);
 
+	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+	if (IS_GEN3(dev)) {
+		u32 tmp = I915_READ(MI_ARB_STATE);
+		if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+			/* arb state is a masked write, so set bit + bit in mask */
+			tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+			I915_WRITE(MI_ARB_STATE, tmp);
+		}
+	}
+
 	/* Old X drivers will take 0-2 for front, back, depth buffers */
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		dev_priv->fence_reg_start = 3;
@@ -5209,14 +4980,16 @@ i915_gpu_is_active(struct drm_device *dev)
 
 	spin_lock(&dev_priv->mm.active_list_lock);
 	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
-		      list_empty(&dev_priv->mm.active_list);
+		      list_empty(&dev_priv->render_ring.active_list);
+	if (HAS_BSD(dev))
+		lists_empty &= list_empty(&dev_priv->bsd_ring.active_list);
 	spin_unlock(&dev_priv->mm.active_list_lock);
 
 	return !lists_empty;
 }
 
 static int
-i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+i915_gem_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	drm_i915_private_t *dev_priv, *next_dev;
 	struct drm_i915_gem_object *obj_priv, *next_obj;
@@ -5254,8 +5027,10 @@ rescan:
 			continue;
 
 		spin_unlock(&shrink_list_lock);
+		i915_gem_retire_requests(dev, &dev_priv->render_ring);
 
-		i915_gem_retire_requests(dev);
+		if (HAS_BSD(dev))
+			i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
 
 		list_for_each_entry_safe(obj_priv, next_obj,
 					 &dev_priv->mm.inactive_list,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8c3f0802686..dba53d4b9fb 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -53,7 +53,7 @@
 	 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 
 /** Interrupts that we mask and unmask at runtime. */
-#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT | I915_BSD_USER_INTERRUPT)
 
 #define I915_PIPE_VBLANK_STATUS	(PIPE_START_VBLANK_INTERRUPT_STATUS |\
 				 PIPE_VBLANK_INTERRUPT_STATUS)
@@ -74,7 +74,7 @@ ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
 	}
 }
 
-static inline void
+void
 ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
 	if ((dev_priv->gt_irq_mask_reg & mask) != mask) {
@@ -115,7 +115,7 @@ i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
 	}
 }
 
-static inline void
+void
 i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
 	if ((dev_priv->irq_mask_reg & mask) != mask) {
@@ -278,10 +278,9 @@ static void i915_handle_rps_change(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 busy_up, busy_down, max_avg, min_avg;
-	u16 rgvswctl;
 	u8 new_delay = dev_priv->cur_delay;
 
-	I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS) & ~MEMINT_EVAL_CHG);
+	I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
 	busy_up = I915_READ(RCPREVBSYTUPAVG);
 	busy_down = I915_READ(RCPREVBSYTDNAVG);
 	max_avg = I915_READ(RCBMAXAVG);
@@ -300,27 +299,8 @@ static void i915_handle_rps_change(struct drm_device *dev)
 			new_delay = dev_priv->min_delay;
 	}
 
-	DRM_DEBUG("rps change requested: %d -> %d\n",
-		  dev_priv->cur_delay, new_delay);
-
-	rgvswctl = I915_READ(MEMSWCTL);
-	if (rgvswctl & MEMCTL_CMD_STS) {
-		DRM_ERROR("gpu busy, RCS change rejected\n");
-		return; /* still busy with another command */
-	}
-
-	/* Program the new state */
-	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
-		(new_delay << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
-	I915_WRITE(MEMSWCTL, rgvswctl);
-	POSTING_READ(MEMSWCTL);
-
-	rgvswctl |= MEMCTL_CMD_STS;
-	I915_WRITE(MEMSWCTL, rgvswctl);
-
-	dev_priv->cur_delay = new_delay;
-
-	DRM_DEBUG("rps changed\n");
+	if (ironlake_set_drps(dev, new_delay))
+		dev_priv->cur_delay = new_delay;
 
 	return;
 }
@@ -331,6 +311,7 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	int ret = IRQ_NONE;
 	u32 de_iir, gt_iir, de_ier, pch_iir;
 	struct drm_i915_master_private *master_priv;
+	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 
 	/* disable master interrupt before clearing iir  */
 	de_ier = I915_READ(DEIER);
@@ -354,13 +335,16 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	}
 
 	if (gt_iir & GT_PIPE_NOTIFY) {
-		u32 seqno = i915_get_gem_seqno(dev);
-		dev_priv->mm.irq_gem_seqno = seqno;
+		u32 seqno = render_ring->get_gem_seqno(dev, render_ring);
+		render_ring->irq_gem_seqno = seqno;
 		trace_i915_gem_request_complete(dev, seqno);
-		DRM_WAKEUP(&dev_priv->irq_queue);
+		DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
 		dev_priv->hangcheck_count = 0;
 		mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
 	}
+	if (gt_iir & GT_BSD_USER_INTERRUPT)
+		DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
+
 
 	if (de_iir & DE_GSE)
 		ironlake_opregion_gse_intr(dev);
@@ -388,7 +372,7 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	}
 
 	if (de_iir & DE_PCU_EVENT) {
-		I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS));
+		I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
 		i915_handle_rps_change(dev);
 	}
 
@@ -536,17 +520,18 @@ i915_ringbuffer_last_batch(struct drm_device *dev)
 	 */
 	bbaddr = 0;
 	head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-	ring = (u32 *)(dev_priv->ring.virtual_start + head);
+	ring = (u32 *)(dev_priv->render_ring.virtual_start + head);
 
-	while (--ring >= (u32 *)dev_priv->ring.virtual_start) {
+	while (--ring >= (u32 *)dev_priv->render_ring.virtual_start) {
 		bbaddr = i915_get_bbaddr(dev, ring);
 		if (bbaddr)
 			break;
 	}
 
 	if (bbaddr == 0) {
-		ring = (u32 *)(dev_priv->ring.virtual_start + dev_priv->ring.Size);
-		while (--ring >= (u32 *)dev_priv->ring.virtual_start) {
+		ring = (u32 *)(dev_priv->render_ring.virtual_start
+				+ dev_priv->render_ring.size);
+		while (--ring >= (u32 *)dev_priv->render_ring.virtual_start) {
 			bbaddr = i915_get_bbaddr(dev, ring);
 			if (bbaddr)
 				break;
@@ -587,7 +572,7 @@ static void i915_capture_error_state(struct drm_device *dev)
 		return;
 	}
 
-	error->seqno = i915_get_gem_seqno(dev);
+	error->seqno = i915_get_gem_seqno(dev, &dev_priv->render_ring);
 	error->eir = I915_READ(EIR);
 	error->pgtbl_er = I915_READ(PGTBL_ER);
 	error->pipeastat = I915_READ(PIPEASTAT);
@@ -615,7 +600,9 @@ static void i915_capture_error_state(struct drm_device *dev)
 	batchbuffer[0] = NULL;
 	batchbuffer[1] = NULL;
 	count = 0;
-	list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+	list_for_each_entry(obj_priv,
+			&dev_priv->render_ring.active_list, list) {
+
 		struct drm_gem_object *obj = &obj_priv->base;
 
 		if (batchbuffer[0] == NULL &&
@@ -639,7 +626,8 @@ static void i915_capture_error_state(struct drm_device *dev)
 	error->batchbuffer[1] = i915_error_object_create(dev, batchbuffer[1]);
 
 	/* Record the ringbuffer */
-	error->ringbuffer = i915_error_object_create(dev, dev_priv->ring.ring_obj);
+	error->ringbuffer = i915_error_object_create(dev,
+			dev_priv->render_ring.gem_object);
 
 	/* Record buffers on the active list. */
 	error->active_bo = NULL;
@@ -651,7 +639,8 @@ static void i915_capture_error_state(struct drm_device *dev)
 
 	if (error->active_bo) {
 		int i = 0;
-		list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+		list_for_each_entry(obj_priv,
+				&dev_priv->render_ring.active_list, list) {
 			struct drm_gem_object *obj = &obj_priv->base;
 
 			error->active_bo[i].size = obj->size;
@@ -703,24 +692,13 @@ void i915_destroy_error_state(struct drm_device *dev)
 		i915_error_state_free(dev, error);
 }
 
-/**
- * i915_handle_error - handle an error interrupt
- * @dev: drm device
- *
- * Do some basic checking of regsiter state at error interrupt time and
- * dump it to the syslog.  Also call i915_capture_error_state() to make
- * sure we get a record and make it available in debugfs.  Fire a uevent
- * so userspace knows something bad happened (should trigger collection
- * of a ring dump etc.).
- */
-static void i915_handle_error(struct drm_device *dev, bool wedged)
+static void i915_report_and_clear_eir(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 eir = I915_READ(EIR);
-	u32 pipea_stats = I915_READ(PIPEASTAT);
-	u32 pipeb_stats = I915_READ(PIPEBSTAT);
 
-	i915_capture_error_state(dev);
+	if (!eir)
+		return;
 
 	printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
 	       eir);
@@ -766,6 +744,9 @@ static void i915_handle_error(struct drm_device *dev, bool wedged)
 	}
 
 	if (eir & I915_ERROR_MEMORY_REFRESH) {
+		u32 pipea_stats = I915_READ(PIPEASTAT);
+		u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
 		printk(KERN_ERR "memory refresh error\n");
 		printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
 		       pipea_stats);
@@ -822,6 +803,24 @@ static void i915_handle_error(struct drm_device *dev, bool wedged)
 		I915_WRITE(EMR, I915_READ(EMR) | eir);
 		I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
 	}
+}
+
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog.  Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs.  Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev, bool wedged)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	i915_capture_error_state(dev);
+	i915_report_and_clear_eir(dev);
 
 	if (wedged) {
 		atomic_set(&dev_priv->mm.wedged, 1);
@@ -829,7 +828,7 @@ static void i915_handle_error(struct drm_device *dev, bool wedged)
 		/*
 		 * Wakeup waiting processes so they don't hang
 		 */
-		DRM_WAKEUP(&dev_priv->irq_queue);
+		DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
 	}
 
 	queue_work(dev_priv->wq, &dev_priv->error_work);
@@ -848,6 +847,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 	unsigned long irqflags;
 	int irq_received;
 	int ret = IRQ_NONE;
+	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 
 	atomic_inc(&dev_priv->irq_received);
 
@@ -928,30 +928,42 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		}
 
 		if (iir & I915_USER_INTERRUPT) {
-			u32 seqno = i915_get_gem_seqno(dev);
-			dev_priv->mm.irq_gem_seqno = seqno;
+			u32 seqno =
+				render_ring->get_gem_seqno(dev, render_ring);
+			render_ring->irq_gem_seqno = seqno;
 			trace_i915_gem_request_complete(dev, seqno);
-			DRM_WAKEUP(&dev_priv->irq_queue);
+			DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
 			dev_priv->hangcheck_count = 0;
 			mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
 		}
 
-		if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT)
+		if (HAS_BSD(dev) && (iir & I915_BSD_USER_INTERRUPT))
+			DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
+
+		if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
 			intel_prepare_page_flip(dev, 0);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 0);
+		}
 
-		if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT)
+		if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
 			intel_prepare_page_flip(dev, 1);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 1);
+		}
 
 		if (pipea_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 0);
-			intel_finish_page_flip(dev, 0);
+			if (!dev_priv->flip_pending_is_done)
+				intel_finish_page_flip(dev, 0);
 		}
 
 		if (pipeb_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 1);
-			intel_finish_page_flip(dev, 1);
+			if (!dev_priv->flip_pending_is_done)
+				intel_finish_page_flip(dev, 1);
 		}
 
 		if ((pipea_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
@@ -984,7 +996,6 @@ static int i915_emit_irq(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
-	RING_LOCALS;
 
 	i915_kernel_lost_context(dev);
 
@@ -1006,43 +1017,13 @@ static int i915_emit_irq(struct drm_device * dev)
 	return dev_priv->counter;
 }
 
-void i915_user_irq_get(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	unsigned long irqflags;
-
-	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
-		if (HAS_PCH_SPLIT(dev))
-			ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
-		else
-			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
-	}
-	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-}
-
-void i915_user_irq_put(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	unsigned long irqflags;
-
-	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
-	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
-		if (HAS_PCH_SPLIT(dev))
-			ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
-		else
-			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
-	}
-	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-}
-
 void i915_trace_irq_get(struct drm_device *dev, u32 seqno)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 
 	if (dev_priv->trace_irq_seqno == 0)
-		i915_user_irq_get(dev);
+		render_ring->user_irq_get(dev, render_ring);
 
 	dev_priv->trace_irq_seqno = seqno;
 }
@@ -1052,6 +1033,7 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
 	int ret = 0;
+	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 
 	DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr,
 		  READ_BREADCRUMB(dev_priv));
@@ -1065,10 +1047,10 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr)
 	if (master_priv->sarea_priv)
 		master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
 
-	i915_user_irq_get(dev);
-	DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
+	render_ring->user_irq_get(dev, render_ring);
+	DRM_WAIT_ON(ret, dev_priv->render_ring.irq_queue, 3 * DRM_HZ,
 		    READ_BREADCRUMB(dev_priv) >= irq_nr);
-	i915_user_irq_put(dev);
+	render_ring->user_irq_put(dev, render_ring);
 
 	if (ret == -EBUSY) {
 		DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
@@ -1087,7 +1069,7 @@ int i915_irq_emit(struct drm_device *dev, void *data,
 	drm_i915_irq_emit_t *emit = data;
 	int result;
 
-	if (!dev_priv || !dev_priv->ring.virtual_start) {
+	if (!dev_priv || !dev_priv->render_ring.virtual_start) {
 		DRM_ERROR("called with no initialization\n");
 		return -EINVAL;
 	}
@@ -1233,9 +1215,12 @@ int i915_vblank_swap(struct drm_device *dev, void *data,
 	return -EINVAL;
 }
 
-struct drm_i915_gem_request *i915_get_tail_request(struct drm_device *dev) {
+struct drm_i915_gem_request *
+i915_get_tail_request(struct drm_device *dev)
+{
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	return list_entry(dev_priv->mm.request_list.prev, struct drm_i915_gem_request, list);
+	return list_entry(dev_priv->render_ring.request_list.prev,
+			struct drm_i915_gem_request, list);
 }
 
 /**
@@ -1260,8 +1245,10 @@ void i915_hangcheck_elapsed(unsigned long data)
 		acthd = I915_READ(ACTHD_I965);
 
 	/* If all work is done then ACTHD clearly hasn't advanced. */
-	if (list_empty(&dev_priv->mm.request_list) ||
-		       i915_seqno_passed(i915_get_gem_seqno(dev), i915_get_tail_request(dev)->seqno)) {
+	if (list_empty(&dev_priv->render_ring.request_list) ||
+		i915_seqno_passed(i915_get_gem_seqno(dev,
+				&dev_priv->render_ring),
+			i915_get_tail_request(dev)->seqno)) {
 		dev_priv->hangcheck_count = 0;
 		return;
 	}
@@ -1314,7 +1301,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	/* enable kind of interrupts always enabled */
 	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
 			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
-	u32 render_mask = GT_PIPE_NOTIFY;
+	u32 render_mask = GT_PIPE_NOTIFY | GT_BSD_USER_INTERRUPT;
 	u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
 			   SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
 
@@ -1328,7 +1315,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	(void) I915_READ(DEIER);
 
 	/* user interrupt should be enabled, but masked initial */
-	dev_priv->gt_irq_mask_reg = 0xffffffff;
+	dev_priv->gt_irq_mask_reg = ~render_mask;
 	dev_priv->gt_irq_enable_reg = render_mask;
 
 	I915_WRITE(GTIIR, I915_READ(GTIIR));
@@ -1391,7 +1378,10 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
 	u32 error_mask;
 
-	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
+	DRM_INIT_WAITQUEUE(&dev_priv->render_ring.irq_queue);
+
+	if (HAS_BSD(dev))
+		DRM_INIT_WAITQUEUE(&dev_priv->bsd_ring.irq_queue);
 
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 
@@ -1405,29 +1395,10 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	dev_priv->pipestat[1] = 0;
 
 	if (I915_HAS_HOTPLUG(dev)) {
-		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-		/* Note HDMI and DP share bits */
-		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMID_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
-			hotplug_en |= CRT_HOTPLUG_INT_EN;
-		/* Ignore TV since it's buggy */
-
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */
-		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+		dev_priv->irq_mask_reg &= ~I915_DISPLAY_PORT_INTERRUPT;
 	}
 
 	/*
@@ -1445,16 +1416,41 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	}
 	I915_WRITE(EMR, error_mask);
 
-	/* Disable pipe interrupt enables, clear pending pipe status */
-	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
-	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
-	/* Clear pending interrupt status */
-	I915_WRITE(IIR, I915_READ(IIR));
-
-	I915_WRITE(IER, enable_mask);
 	I915_WRITE(IMR, dev_priv->irq_mask_reg);
+	I915_WRITE(IER, enable_mask);
 	(void) I915_READ(IER);
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+		/* Note HDMI and DP share bits */
+		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMID_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+			hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+			/* Programming the CRT detection parameters tends
+			   to generate a spurious hotplug event about three
+			   seconds later.  So just do it once.
+			*/
+			if (IS_G4X(dev))
+				hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+			hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+		}
+
+		/* Ignore TV since it's buggy */
+
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+	}
+
 	opregion_enable_asle(dev);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f3e39cc46f0..cf41c672def 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -178,6 +178,7 @@
 #define   MI_OVERLAY_OFF	(0x2<<21)
 #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
 #define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
 #define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
@@ -334,6 +335,7 @@
 #define   I915_DEBUG_INTERRUPT				(1<<2)
 #define   I915_USER_INTERRUPT				(1<<1)
 #define   I915_ASLE_INTERRUPT				(1<<0)
+#define   I915_BSD_USER_INTERRUPT                      (1<<25)
 #define EIR		0x020b0
 #define EMR		0x020b4
 #define ESR		0x020b8
@@ -357,6 +359,70 @@
 #define LM_BURST_LENGTH     0x00000700
 #define LM_FIFO_WATERMARK   0x0000001F
 #define MI_ARB_STATE	0x020e4 /* 915+ only */
+#define   MI_ARB_MASK_SHIFT	  16	/* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ *   fetches. This is not turned on by default
+ */
+#define   MI_ARB_RENDER_TLB_LOW_PRIORITY	(1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define   MI_ARB_ISOCH_WAIT_GTT			(1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define   MI_ARB_BLOCK_GRANT_MASK		(3 << 12)
+#define   MI_ARB_BLOCK_GRANT_8			(0 << 12)	/* for 3 display planes */
+#define   MI_ARB_BLOCK_GRANT_4			(1 << 12)	/* for 2 display planes */
+#define   MI_ARB_BLOCK_GRANT_2			(2 << 12)	/* for 1 display plane */
+#define   MI_ARB_BLOCK_GRANT_0			(3 << 12)	/* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define   MI_ARB_C3_LP_WRITE_ENABLE		(1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define   MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE	(1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define   MI_ARB_DUAL_DATA_PHASE_DISABLE       	(1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define   MI_ARB_CACHE_SNOOP_DISABLE		(1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define   MI_ARB_TIME_SLICE_MASK		(7 << 5)
+#define   MI_ARB_TIME_SLICE_1			(0 << 5)
+#define   MI_ARB_TIME_SLICE_2			(1 << 5)
+#define   MI_ARB_TIME_SLICE_4			(2 << 5)
+#define   MI_ARB_TIME_SLICE_6			(3 << 5)
+#define   MI_ARB_TIME_SLICE_8			(4 << 5)
+#define   MI_ARB_TIME_SLICE_10			(5 << 5)
+#define   MI_ARB_TIME_SLICE_14			(6 << 5)
+#define   MI_ARB_TIME_SLICE_16			(7 << 5)
+
+/* Low priority grace period page size */
+#define   MI_ARB_LOW_PRIORITY_GRACE_4KB		(0 << 4)	/* default */
+#define   MI_ARB_LOW_PRIORITY_GRACE_8KB		(1 << 4)
+
+/* Disable display A/B trickle feed */
+#define   MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE	(1 << 2)
+
+/* Set display plane priority */
+#define   MI_ARB_DISPLAY_PRIORITY_A_B		(0 << 0)	/* display A > display B */
+#define   MI_ARB_DISPLAY_PRIORITY_B_A		(1 << 0)	/* display B > display A */
+
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_MASK_SHIFT          16
 #define   CM0_IZ_OPT_DISABLE      (1<<6)
@@ -367,7 +433,40 @@
 #define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
 #define BB_ADDR		0x02140 /* 8 bytes */
 #define GFX_FLSH_CNTL	0x02170 /* 915+ only */
+#define ECOSKPD		0x021d0
+#define   ECO_GATING_CX_ONLY	(1<<3)
+#define   ECO_FLIP_DONE		(1<<0)
+
+/* GEN6 interrupt control */
+#define GEN6_RENDER_HWSTAM	0x2098
+#define GEN6_RENDER_IMR		0x20a8
+#define   GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT		(1 << 8)
+#define   GEN6_RENDER_PPGTT_PAGE_FAULT			(1 << 7)
+#define   GEN6_RENDER TIMEOUT_COUNTER_EXPIRED		(1 << 6)
+#define   GEN6_RENDER_L3_PARITY_ERROR			(1 << 5)
+#define   GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT	(1 << 4)
+#define   GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR	(1 << 3)
+#define   GEN6_RENDER_SYNC_STATUS			(1 << 2)
+#define   GEN6_RENDER_DEBUG_INTERRUPT			(1 << 1)
+#define   GEN6_RENDER_USER_INTERRUPT			(1 << 0)
+
+#define GEN6_BLITTER_HWSTAM	0x22098
+#define GEN6_BLITTER_IMR	0x220a8
+#define   GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT	(1 << 26)
+#define   GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR	(1 << 25)
+#define   GEN6_BLITTER_SYNC_STATUS			(1 << 24)
+#define   GEN6_BLITTER_USER_INTERRUPT			(1 << 22)
+/*
+ * BSD (bit stream decoder instruction and interrupt control register defines
+ * (G4X and Ironlake only)
+ */
 
+#define BSD_RING_TAIL          0x04030
+#define BSD_RING_HEAD          0x04034
+#define BSD_RING_START         0x04038
+#define BSD_RING_CTL           0x0403c
+#define BSD_RING_ACTHD         0x04074
+#define BSD_HWS_PGA            0x04080
 
 /*
  * Framebuffer compression (915+ only)
@@ -805,6 +904,10 @@
 #define DCC_CHANNEL_XOR_DISABLE				(1 << 10)
 #define DCC_CHANNEL_XOR_BIT_17				(1 << 9)
 
+/** Pineview MCH register contains DDR3 setting */
+#define CSHRDDR3CTL            0x101a8
+#define CSHRDDR3CTL_DDR3       (1 << 2)
+
 /** 965 MCH register controlling DRAM channel configuration */
 #define C0DRB3			0x10206
 #define C1DRB3			0x10606
@@ -826,6 +929,12 @@
 #define CLKCFG_MEM_800					(3 << 4)
 #define CLKCFG_MEM_MASK					(7 << 4)
 
+#define TR1			0x11006
+#define TSFS			0x11020
+#define   TSFS_SLOPE_MASK	0x0000ff00
+#define   TSFS_SLOPE_SHIFT	8
+#define   TSFS_INTR_MASK	0x000000ff
+
 #define CRSTANDVID		0x11100
 #define PXVFREQ_BASE		0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
 #define   PXVFREQ_PX_MASK	0x7f000000
@@ -964,6 +1073,41 @@
 #define   MEMSTAT_SRC_CTL_STDBY 3
 #define RCPREVBSYTUPAVG		0x113b8
 #define RCPREVBSYTDNAVG		0x113bc
+#define SDEW			0x1124c
+#define CSIEW0			0x11250
+#define CSIEW1			0x11254
+#define CSIEW2			0x11258
+#define PEW			0x1125c
+#define DEW			0x11270
+#define MCHAFE			0x112c0
+#define CSIEC			0x112e0
+#define DMIEC			0x112e4
+#define DDREC			0x112e8
+#define PEG0EC			0x112ec
+#define PEG1EC			0x112f0
+#define GFXEC			0x112f4
+#define RPPREVBSYTUPAVG		0x113b8
+#define RPPREVBSYTDNAVG		0x113bc
+#define ECR			0x11600
+#define   ECR_GPFE		(1<<31)
+#define   ECR_IMONE		(1<<30)
+#define   ECR_CAP_MASK		0x0000001f /* Event range, 0-31 */
+#define OGW0			0x11608
+#define OGW1			0x1160c
+#define EG0			0x11610
+#define EG1			0x11614
+#define EG2			0x11618
+#define EG3			0x1161c
+#define EG4			0x11620
+#define EG5			0x11624
+#define EG6			0x11628
+#define EG7			0x1162c
+#define PXW			0x11664
+#define PXWL			0x11680
+#define LCFUSE02		0x116c0
+#define   LCFUSE_HIV_MASK	0x000000ff
+#define CSIPLL0			0x12c10
+#define DDRMPLL1		0X12c20
 #define PEG_BAND_GAP_DATA	0x14d68
 
 /*
@@ -1054,8 +1198,6 @@
 #define CRT_HOTPLUG_DETECT_DELAY_2G		(1 << 4)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
-#define CRT_HOTPLUG_MASK			(0x3fc) /* Bits 9-2 */
-#define CRT_FORCE_HOTPLUG_MASK			0xfffffe1f
 
 #define PORT_HOTPLUG_STAT	0x61114
 #define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
@@ -2355,6 +2497,8 @@
 #define GT_PIPE_NOTIFY		(1 << 4)
 #define GT_SYNC_STATUS          (1 << 2)
 #define GT_USER_INTERRUPT       (1 << 0)
+#define GT_BSD_USER_INTERRUPT   (1 << 5)
+
 
 #define GTISR   0x44010
 #define GTIMR   0x44014
@@ -2690,6 +2834,9 @@
 #define  SDVO_ENCODING          (0)
 #define  TMDS_ENCODING          (2 << 10)
 #define  NULL_PACKET_VSYNC_ENABLE       (1 << 9)
+/* CPT */
+#define  HDMI_MODE_SELECT	(1 << 9)
+#define  DVI_MODE_SELECT	(0)
 #define  SDVOB_BORDER_ENABLE    (1 << 7)
 #define  AUDIO_ENABLE           (1 << 6)
 #define  VSYNC_ACTIVE_HIGH      (1 << 4)
@@ -2722,6 +2869,7 @@
 
 #define PCH_PP_STATUS		0xc7200
 #define PCH_PP_CONTROL		0xc7204
+#define  PANEL_UNLOCK_REGS	(0xabcd << 16)
 #define  EDP_FORCE_VDD		(1 << 3)
 #define  EDP_BLC_ENABLE		(1 << 2)
 #define  PANEL_POWER_RESET	(1 << 1)
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index 9e4c45f68d6..fab21760dd5 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -53,23 +53,6 @@ TRACE_EVENT(i915_gem_object_bind,
 		      __entry->obj, __entry->gtt_offset)
 );
 
-TRACE_EVENT(i915_gem_object_clflush,
-
-	    TP_PROTO(struct drm_gem_object *obj),
-
-	    TP_ARGS(obj),
-
-	    TP_STRUCT__entry(
-			     __field(struct drm_gem_object *, obj)
-			     ),
-
-	    TP_fast_assign(
-			   __entry->obj = obj;
-			   ),
-
-	    TP_printk("obj=%p", __entry->obj)
-);
-
 TRACE_EVENT(i915_gem_object_change_domain,
 
 	    TP_PROTO(struct drm_gem_object *obj, uint32_t old_read_domains, uint32_t old_write_domain),
@@ -132,6 +115,13 @@ DECLARE_EVENT_CLASS(i915_gem_object,
 	    TP_printk("obj=%p", __entry->obj)
 );
 
+DEFINE_EVENT(i915_gem_object, i915_gem_object_clflush,
+
+	    TP_PROTO(struct drm_gem_object *obj),
+
+	    TP_ARGS(obj)
+);
+
 DEFINE_EVENT(i915_gem_object, i915_gem_object_unbind,
 
 	    TP_PROTO(struct drm_gem_object *obj),
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4c748d8f73d..96f75d7f663 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -95,6 +95,16 @@ fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 	panel_fixed_mode->clock = dvo_timing->clock * 10;
 	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
 
+	if (dvo_timing->hsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (dvo_timing->vsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
 	/* Some VBTs have bogus h/vtotal values */
 	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
 		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index e16ac5a28c3..ee0732b222a 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -217,7 +217,8 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 hotplug_en;
+	u32 hotplug_en, orig, stat;
+	bool ret = false;
 	int i, tries = 0;
 
 	if (HAS_PCH_SPLIT(dev))
@@ -232,15 +233,9 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 		tries = 2;
 	else
 		tries = 1;
-	hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
+	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_G4X(dev))
-		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-
-	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
 	for (i = 0; i < tries ; i++) {
 		unsigned long timeout;
 		/* turn on the FORCE_DETECT */
@@ -255,11 +250,17 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 		} while (time_after(timeout, jiffies));
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
-	    CRT_HOTPLUG_MONITOR_NONE)
-		return true;
+	stat = I915_READ(PORT_HOTPLUG_STAT);
+	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* clear the interrupt we just generated, if any */
+	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	I915_WRITE(PORT_HOTPLUG_EN, orig);
 
-	return false;
+	return ret;
 }
 
 static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
@@ -569,7 +570,7 @@ void intel_crt_init(struct drm_device *dev)
 				   (1 << INTEL_ANALOG_CLONE_BIT) |
 				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
-	connector->interlace_allowed = 0;
+	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
 	drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f469a84cacf..5e21b311982 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -862,8 +862,8 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int max_n;
 	bool found;
-	/* approximately equals target * 0.00488 */
-	int err_most = (target >> 8) + (target >> 10);
+	/* approximately equals target * 0.00585 */
+	int err_most = (target >> 8) + (target >> 9);
 	found = false;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -1029,19 +1029,28 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
 void i8xx_disable_fbc(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
 	u32 fbc_ctl;
 
 	if (!I915_HAS_FBC(dev))
 		return;
 
+	if (!(I915_READ(FBC_CONTROL) & FBC_CTL_EN))
+		return;	/* Already off, just return */
+
 	/* Disable compression */
 	fbc_ctl = I915_READ(FBC_CONTROL);
 	fbc_ctl &= ~FBC_CTL_EN;
 	I915_WRITE(FBC_CONTROL, fbc_ctl);
 
 	/* Wait for compressing bit to clear */
-	while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING)
-		; /* nothing */
+	while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) {
+		if (time_after(jiffies, timeout)) {
+			DRM_DEBUG_DRIVER("FBC idle timed out\n");
+			break;
+		}
+		; /* do nothing */
+	}
 
 	intel_wait_for_vblank(dev);
 
@@ -1171,8 +1180,12 @@ static void intel_update_fbc(struct drm_crtc *crtc,
 	struct drm_framebuffer *fb = crtc->fb;
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj_priv;
+	struct drm_crtc *tmp_crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int plane = intel_crtc->plane;
+	int crtcs_enabled = 0;
+
+	DRM_DEBUG_KMS("\n");
 
 	if (!i915_powersave)
 		return;
@@ -1190,10 +1203,21 @@ static void intel_update_fbc(struct drm_crtc *crtc,
 	 * If FBC is already on, we just have to verify that we can
 	 * keep it that way...
 	 * Need to disable if:
+	 *   - more than one pipe is active
 	 *   - changing FBC params (stride, fence, mode)
 	 *   - new fb is too large to fit in compressed buffer
 	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
 	 */
+	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
+		if (tmp_crtc->enabled)
+			crtcs_enabled++;
+	}
+	DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
+	if (crtcs_enabled > 1) {
+		DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+		goto out_disable;
+	}
 	if (intel_fb->obj->size > dev_priv->cfb_size) {
 		DRM_DEBUG_KMS("framebuffer too large, disabling "
 				"compression\n");
@@ -1239,13 +1263,14 @@ static void intel_update_fbc(struct drm_crtc *crtc,
 	return;
 
 out_disable:
-	DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
 	/* Multiple disables should be harmless */
-	if (intel_fbc_enabled(dev))
+	if (intel_fbc_enabled(dev)) {
+		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
 		intel_disable_fbc(dev);
+	}
 }
 
-static int
+int
 intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
@@ -1386,7 +1411,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	Start = obj_priv->gtt_offset;
 	Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
 
-	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, crtc->fb->pitch);
 	I915_WRITE(dspstride, crtc->fb->pitch);
 	if (IS_I965G(dev)) {
 		I915_WRITE(dspbase, Offset);
@@ -2244,6 +2270,11 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			intel_wait_for_vblank(dev);
 		}
 
+		/* Don't disable pipe A or pipe A PLLs if needed */
+		if (pipeconf_reg == PIPEACONF &&
+		    (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+			goto skip_pipe_off;
+
 		/* Next, disable display pipes */
 		temp = I915_READ(pipeconf_reg);
 		if ((temp & PIPEACONF_ENABLE) != 0) {
@@ -2259,7 +2290,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
 			I915_READ(dpll_reg);
 		}
-
+	skip_pipe_off:
 		/* Wait for the clocks to turn off. */
 		udelay(150);
 		break;
@@ -2629,6 +2660,7 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
 
 struct cxsr_latency {
 	int is_desktop;
+	int is_ddr3;
 	unsigned long fsb_freq;
 	unsigned long mem_freq;
 	unsigned long display_sr;
@@ -2638,33 +2670,45 @@ struct cxsr_latency {
 };
 
 static struct cxsr_latency cxsr_latency_table[] = {
-	{1, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
-	{1, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
-	{1, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
-
-	{1, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
-	{1, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
-	{1, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
-
-	{1, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
-	{1, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
-	{1, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
-
-	{0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
-	{0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
-	{0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
-
-	{0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
-	{0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
-	{0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
-
-	{0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
-	{0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
-	{0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+	{1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
+	{1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
+	{1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
+	{1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
+	{1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
+
+	{1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
+	{1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
+	{1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
+	{1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
+	{1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
+
+	{1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
+	{1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
+	{1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
+	{1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
+	{1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
+
+	{0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
+	{0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
+	{0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
+	{0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
+	{0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
+
+	{0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
+	{0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
+	{0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
+	{0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
+	{0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
+
+	{0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
+	{0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
+	{0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+	{0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
+	{0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
 };
 
-static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
-						   int mem)
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3, 
+						   int fsb, int mem)
 {
 	int i;
 	struct cxsr_latency *latency;
@@ -2675,6 +2719,7 @@ static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
 	for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
 		latency = &cxsr_latency_table[i];
 		if (is_desktop == latency->is_desktop &&
+		    is_ddr3 == latency->is_ddr3 &&
 		    fsb == latency->fsb_freq && mem == latency->mem_freq)
 			return latency;
 	}
@@ -2789,8 +2834,8 @@ static void pineview_update_wm(struct drm_device *dev,  int planea_clock,
 	struct cxsr_latency *latency;
 	int sr_clock;
 
-	latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->fsb_freq,
-					 dev_priv->mem_freq);
+	latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, 
+					 dev_priv->fsb_freq, dev_priv->mem_freq);
 	if (!latency) {
 		DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
 		pineview_disable_cxsr(dev);
@@ -2943,11 +2988,13 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock,
 		if (srwm < 0)
 			srwm = 1;
 		srwm &= 0x3f;
-		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+		if (IS_I965GM(dev))
+			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
 	} else {
 		/* Turn off self refresh if both pipes are enabled */
-		I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
-					& ~FW_BLC_SELF_EN);
+		if (IS_I965GM(dev))
+			I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+				   & ~FW_BLC_SELF_EN);
 	}
 
 	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
@@ -3626,6 +3673,11 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
 	}
 
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+	dpll |= DPLL_VCO_ENABLE;
+
+
 	/* Disable the panel fitter if it was on our pipe */
 	if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
 		I915_WRITE(PFIT_CONTROL, 0);
@@ -3702,6 +3754,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			if (dev_priv->lvds_dither) {
 				if (HAS_PCH_SPLIT(dev)) {
 					pipeconf |= PIPE_ENABLE_DITHER;
+					pipeconf &= ~PIPE_DITHER_TYPE_MASK;
 					pipeconf |= PIPE_DITHER_TYPE_ST01;
 				} else
 					lvds |= LVDS_ENABLE_DITHER;
@@ -3772,6 +3825,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vdisplay -= 1;
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_start -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		adjusted_mode->crtc_vsync_end -= 1;
+		adjusted_mode->crtc_vsync_start -= 1;
+	} else
+		pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+
 	I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
 		   ((adjusted_mode->crtc_htotal - 1) << 16));
 	I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
@@ -3934,6 +3999,13 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 			DRM_ERROR("failed to pin cursor bo\n");
 			goto fail_locked;
 		}
+
+		ret = i915_gem_object_set_to_gtt_domain(bo, 0);
+		if (ret) {
+			DRM_ERROR("failed to move cursor bo into the GTT\n");
+			goto fail_unpin;
+		}
+
 		addr = obj_priv->gtt_offset;
 	} else {
 		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
@@ -3977,6 +4049,8 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	intel_crtc->cursor_bo = bo;
 
 	return 0;
+fail_unpin:
+	i915_gem_object_unpin(bo);
 fail_locked:
 	mutex_unlock(&dev->struct_mutex);
 fail:
@@ -4357,7 +4431,8 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
 		DRM_DEBUG_DRIVER("upclocking LVDS\n");
 
 		/* Unlock panel regs */
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   PANEL_UNLOCK_REGS);
 
 		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
@@ -4400,7 +4475,8 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
 		DRM_DEBUG_DRIVER("downclocking LVDS\n");
 
 		/* Unlock panel regs */
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   PANEL_UNLOCK_REGS);
 
 		dpll |= DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
@@ -4430,27 +4506,31 @@ static void intel_idle_update(struct work_struct *work)
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_crtc *crtc;
 	struct intel_crtc *intel_crtc;
+	int enabled = 0;
 
 	if (!i915_powersave)
 		return;
 
 	mutex_lock(&dev->struct_mutex);
 
-	if (IS_I945G(dev) || IS_I945GM(dev)) {
-		DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
-		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
-	}
+	i915_update_gfx_val(dev_priv);
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		/* Skip inactive CRTCs */
 		if (!crtc->fb)
 			continue;
 
+		enabled++;
 		intel_crtc = to_intel_crtc(crtc);
 		if (!intel_crtc->busy)
 			intel_decrease_pllclock(crtc);
 	}
 
+	if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
+		DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+	}
+
 	mutex_unlock(&dev->struct_mutex);
 }
 
@@ -4546,10 +4626,10 @@ static void intel_unpin_work_fn(struct work_struct *__work)
 	kfree(work);
 }
 
-void intel_finish_page_flip(struct drm_device *dev, int pipe)
+static void do_intel_finish_page_flip(struct drm_device *dev,
+				      struct drm_crtc *crtc)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
 	struct drm_i915_gem_object *obj_priv;
@@ -4564,12 +4644,6 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe)
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 	if (work == NULL || !work->pending) {
-		if (work && !work->pending) {
-			obj_priv = to_intel_bo(work->pending_flip_obj);
-			DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n",
-					 obj_priv,
-					 atomic_read(&obj_priv->pending_flip));
-		}
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		return;
 	}
@@ -4599,6 +4673,22 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe)
 	schedule_work(&work->work);
 }
 
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
 void intel_prepare_page_flip(struct drm_device *dev, int plane)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -4626,17 +4716,15 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	struct drm_gem_object *obj;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
-	unsigned long flags;
+	unsigned long flags, offset;
 	int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
 	int ret, pipesrc;
-	RING_LOCALS;
+	u32 flip_mask;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
 	if (work == NULL)
 		return -ENOMEM;
 
-	mutex_lock(&dev->struct_mutex);
-
 	work->event = event;
 	work->dev = crtc->dev;
 	intel_fb = to_intel_framebuffer(crtc->fb);
@@ -4646,10 +4734,10 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	/* We borrow the event spin lock for protecting unpin_work */
 	spin_lock_irqsave(&dev->event_lock, flags);
 	if (intel_crtc->unpin_work) {
-		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		kfree(work);
-		mutex_unlock(&dev->struct_mutex);
+
+		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
 		return -EBUSY;
 	}
 	intel_crtc->unpin_work = work;
@@ -4658,13 +4746,19 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
+	mutex_lock(&dev->struct_mutex);
 	ret = intel_pin_and_fence_fb_obj(dev, obj);
 	if (ret != 0) {
-		DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
-			  to_intel_bo(obj));
-		kfree(work);
-		intel_crtc->unpin_work = NULL;
 		mutex_unlock(&dev->struct_mutex);
+
+		spin_lock_irqsave(&dev->event_lock, flags);
+		intel_crtc->unpin_work = NULL;
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+
+		kfree(work);
+
+		DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
+				 to_intel_bo(obj));
 		return ret;
 	}
 
@@ -4679,16 +4773,33 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	atomic_inc(&obj_priv->pending_flip);
 	work->pending_flip_obj = obj;
 
+	if (intel_crtc->plane)
+		flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+	else
+		flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
+
+	/* Wait for any previous flip to finish */
+	if (IS_GEN3(dev))
+		while (I915_READ(ISR) & flip_mask)
+			;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = obj_priv->gtt_offset;
+	offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
+
 	BEGIN_LP_RING(4);
-	OUT_RING(MI_DISPLAY_FLIP |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitch);
 	if (IS_I965G(dev)) {
-		OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
+		OUT_RING(MI_DISPLAY_FLIP |
+			 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+		OUT_RING(fb->pitch);
+		OUT_RING(offset | obj_priv->tiling_mode);
 		pipesrc = I915_READ(pipesrc_reg); 
 		OUT_RING(pipesrc & 0x0fff0fff);
 	} else {
-		OUT_RING(obj_priv->gtt_offset);
+		OUT_RING(MI_DISPLAY_FLIP_I915 |
+			 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+		OUT_RING(fb->pitch);
+		OUT_RING(offset);
 		OUT_RING(MI_NOOP);
 	}
 	ADVANCE_LP_RING();
@@ -5023,10 +5134,32 @@ err_unref:
 	return NULL;
 }
 
+bool ironlake_set_drps(struct drm_device *dev, u8 val)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u16 rgvswctl;
+
+	rgvswctl = I915_READ16(MEMSWCTL);
+	if (rgvswctl & MEMCTL_CMD_STS) {
+		DRM_DEBUG("gpu busy, RCS change rejected\n");
+		return false; /* still busy with another command */
+	}
+
+	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
+		(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+	POSTING_READ16(MEMSWCTL);
+
+	rgvswctl |= MEMCTL_CMD_STS;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+
+	return true;
+}
+
 void ironlake_enable_drps(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 rgvmodectl = I915_READ(MEMMODECTL), rgvswctl;
+	u32 rgvmodectl = I915_READ(MEMMODECTL);
 	u8 fmax, fmin, fstart, vstart;
 	int i = 0;
 
@@ -5045,13 +5178,21 @@ void ironlake_enable_drps(struct drm_device *dev)
 	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
 	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
 		MEMMODE_FSTART_SHIFT;
+	fstart = fmax;
+
 	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
 		PXVFREQ_PX_SHIFT;
 
-	dev_priv->max_delay = fstart; /* can't go to fmax w/o IPS */
+	dev_priv->fmax = fstart; /* IPS callback will increase this */
+	dev_priv->fstart = fstart;
+
+	dev_priv->max_delay = fmax;
 	dev_priv->min_delay = fmin;
 	dev_priv->cur_delay = fstart;
 
+	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
+			 fstart);
+
 	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
 
 	/*
@@ -5073,20 +5214,19 @@ void ironlake_enable_drps(struct drm_device *dev)
 	}
 	msleep(1);
 
-	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
-		(fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
-	I915_WRITE(MEMSWCTL, rgvswctl);
-	POSTING_READ(MEMSWCTL);
+	ironlake_set_drps(dev, fstart);
 
-	rgvswctl |= MEMCTL_CMD_STS;
-	I915_WRITE(MEMSWCTL, rgvswctl);
+	dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
+		I915_READ(0x112e0);
+	dev_priv->last_time1 = jiffies_to_msecs(jiffies);
+	dev_priv->last_count2 = I915_READ(0x112f4);
+	getrawmonotonic(&dev_priv->last_time2);
 }
 
 void ironlake_disable_drps(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 rgvswctl;
-	u8 fstart;
+	u16 rgvswctl = I915_READ16(MEMSWCTL);
 
 	/* Ack interrupts, disable EFC interrupt */
 	I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
@@ -5096,11 +5236,7 @@ void ironlake_disable_drps(struct drm_device *dev)
 	I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
 
 	/* Go back to the starting frequency */
-	fstart = (I915_READ(MEMMODECTL) & MEMMODE_FSTART_MASK) >>
-		MEMMODE_FSTART_SHIFT;
-	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
-		(fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
-	I915_WRITE(MEMSWCTL, rgvswctl);
+	ironlake_set_drps(dev, dev_priv->fstart);
 	msleep(1);
 	rgvswctl |= MEMCTL_CMD_STS;
 	I915_WRITE(MEMSWCTL, rgvswctl);
@@ -5108,6 +5244,92 @@ void ironlake_disable_drps(struct drm_device *dev)
 
 }
 
+static unsigned long intel_pxfreq(u32 vidfreq)
+{
+	unsigned long freq;
+	int div = (vidfreq & 0x3f0000) >> 16;
+	int post = (vidfreq & 0x3000) >> 12;
+	int pre = (vidfreq & 0x7);
+
+	if (!pre)
+		return 0;
+
+	freq = ((div * 133333) / ((1<<post) * pre));
+
+	return freq;
+}
+
+void intel_init_emon(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 lcfuse;
+	u8 pxw[16];
+	int i;
+
+	/* Disable to program */
+	I915_WRITE(ECR, 0);
+	POSTING_READ(ECR);
+
+	/* Program energy weights for various events */
+	I915_WRITE(SDEW, 0x15040d00);
+	I915_WRITE(CSIEW0, 0x007f0000);
+	I915_WRITE(CSIEW1, 0x1e220004);
+	I915_WRITE(CSIEW2, 0x04000004);
+
+	for (i = 0; i < 5; i++)
+		I915_WRITE(PEW + (i * 4), 0);
+	for (i = 0; i < 3; i++)
+		I915_WRITE(DEW + (i * 4), 0);
+
+	/* Program P-state weights to account for frequency power adjustment */
+	for (i = 0; i < 16; i++) {
+		u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
+		unsigned long freq = intel_pxfreq(pxvidfreq);
+		unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
+			PXVFREQ_PX_SHIFT;
+		unsigned long val;
+
+		val = vid * vid;
+		val *= (freq / 1000);
+		val *= 255;
+		val /= (127*127*900);
+		if (val > 0xff)
+			DRM_ERROR("bad pxval: %ld\n", val);
+		pxw[i] = val;
+	}
+	/* Render standby states get 0 weight */
+	pxw[14] = 0;
+	pxw[15] = 0;
+
+	for (i = 0; i < 4; i++) {
+		u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
+			(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
+		I915_WRITE(PXW + (i * 4), val);
+	}
+
+	/* Adjust magic regs to magic values (more experimental results) */
+	I915_WRITE(OGW0, 0);
+	I915_WRITE(OGW1, 0);
+	I915_WRITE(EG0, 0x00007f00);
+	I915_WRITE(EG1, 0x0000000e);
+	I915_WRITE(EG2, 0x000e0000);
+	I915_WRITE(EG3, 0x68000300);
+	I915_WRITE(EG4, 0x42000000);
+	I915_WRITE(EG5, 0x00140031);
+	I915_WRITE(EG6, 0);
+	I915_WRITE(EG7, 0);
+
+	for (i = 0; i < 8; i++)
+		I915_WRITE(PXWL + (i * 4), 0);
+
+	/* Enable PMON + select events */
+	I915_WRITE(ECR, 0x80000019);
+
+	lcfuse = I915_READ(LCFUSE02);
+
+	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
+}
+
 void intel_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5277,11 +5499,13 @@ static void intel_init_display(struct drm_device *dev)
 			dev_priv->display.update_wm = NULL;
 	} else if (IS_PINEVIEW(dev)) {
 		if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
+					    dev_priv->is_ddr3,
 					    dev_priv->fsb_freq,
 					    dev_priv->mem_freq)) {
 			DRM_INFO("failed to find known CxSR latency "
-				 "(found fsb freq %d, mem freq %d), "
+				 "(found ddr%s fsb freq %d, mem freq %d), "
 				 "disabling CxSR\n",
+				 (dev_priv->is_ddr3 == 1) ? "3": "2",
 				 dev_priv->fsb_freq, dev_priv->mem_freq);
 			/* Disable CxSR and never update its watermark again */
 			pineview_disable_cxsr(dev);
@@ -5307,10 +5531,69 @@ static void intel_init_display(struct drm_device *dev)
 	}
 }
 
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times.  This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+	DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+}
+
+struct intel_quirk {
+	int device;
+	int subsystem_vendor;
+	int subsystem_device;
+	void (*hook)(struct drm_device *dev);
+};
+
+struct intel_quirk intel_quirks[] = {
+	/* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
+	{ 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
+	/* HP Mini needs pipe A force quirk (LP: #322104) */
+	{ 0x27ae,0x103c, 0x361a, quirk_pipea_force },
+
+	/* Thinkpad R31 needs pipe A force quirk */
+	{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+	/* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+	{ 0x3577,  0x1014, 0x0513, quirk_pipea_force },
+	/* ThinkPad X40 needs pipe A force quirk */
+
+	/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+	{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+	/* 855 & before need to leave pipe A & dpll A up */
+	{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+	{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+	struct pci_dev *d = dev->pdev;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
+		struct intel_quirk *q = &intel_quirks[i];
+
+		if (d->device == q->device &&
+		    (d->subsystem_vendor == q->subsystem_vendor ||
+		     q->subsystem_vendor == PCI_ANY_ID) &&
+		    (d->subsystem_device == q->subsystem_device ||
+		     q->subsystem_device == PCI_ANY_ID))
+			q->hook(dev);
+	}
+}
+
 void intel_modeset_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int num_pipe;
 	int i;
 
 	drm_mode_config_init(dev);
@@ -5320,6 +5603,8 @@ void intel_modeset_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = (void *)&intel_mode_funcs;
 
+	intel_init_quirks(dev);
+
 	intel_init_display(dev);
 
 	if (IS_I965G(dev)) {
@@ -5340,13 +5625,13 @@ void intel_modeset_init(struct drm_device *dev)
 		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
 
 	if (IS_MOBILE(dev) || IS_I9XX(dev))
-		num_pipe = 2;
+		dev_priv->num_pipe = 2;
 	else
-		num_pipe = 1;
+		dev_priv->num_pipe = 1;
 	DRM_DEBUG_KMS("%d display pipe%s available.\n",
-		  num_pipe, num_pipe > 1 ? "s" : "");
+		      dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
 
-	for (i = 0; i < num_pipe; i++) {
+	for (i = 0; i < dev_priv->num_pipe; i++) {
 		intel_crtc_init(dev, i);
 	}
 
@@ -5354,8 +5639,10 @@ void intel_modeset_init(struct drm_device *dev)
 
 	intel_init_clock_gating(dev);
 
-	if (IS_IRONLAKE_M(dev))
+	if (IS_IRONLAKE_M(dev)) {
 		ironlake_enable_drps(dev);
+		intel_init_emon(dev);
+	}
 
 	INIT_WORK(&dev_priv->idle_work, intel_idle_update);
 	setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6b1c9a27c27..5dde80f9e65 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -136,6 +136,12 @@ intel_dp_link_required(struct drm_device *dev,
 }
 
 static int
+intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+	return (max_link_clock * max_lanes * 8) / 10;
+}
+
+static int
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
 {
@@ -144,8 +150,11 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
 	int max_lanes = intel_dp_max_lane_count(intel_encoder);
 
-	if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
-			> max_link_clock * max_lanes)
+	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
+	   which are outside spec tolerances but somehow work by magic */
+	if (!IS_eDP(intel_encoder) &&
+	    (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
+	     > intel_dp_max_data_rate(max_link_clock, max_lanes)))
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -506,7 +515,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 
 	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 		for (clock = 0; clock <= max_clock; clock++) {
-			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 
 			if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
 					<= link_avail) {
@@ -521,6 +530,18 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 			}
 		}
 	}
+
+	if (IS_eDP(intel_encoder)) {
+		/* okay we failed just pick the highest */
+		dp_priv->lane_count = max_lane_count;
+		dp_priv->link_bw = bws[max_clock];
+		adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+		DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+			      "count %d clock %d\n",
+			      dp_priv->link_bw, dp_priv->lane_count,
+			      adjusted_mode->clock);
+		return true;
+	}
 	return false;
 }
 
@@ -576,7 +597,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		struct intel_encoder *intel_encoder;
 		struct intel_dp_priv *dp_priv;
 
-		if (!encoder || encoder->crtc != crtc)
+		if (encoder->crtc != crtc)
 			continue;
 
 		intel_encoder = enc_to_intel_encoder(encoder);
@@ -675,10 +696,9 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	dp_priv->link_configuration[1] = dp_priv->lane_count;
 
 	/*
-	 * Check for DPCD version > 1.1,
-	 * enable enahanced frame stuff in that case
+	 * Check for DPCD version > 1.1 and enhanced framing support
 	 */
-	if (dp_priv->dpcd[0] >= 0x11) {
+	if (dp_priv->dpcd[0] >= 0x11 && (dp_priv->dpcd[2] & DP_ENHANCED_FRAME_CAP)) {
 		dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
 		dp_priv->DP |= DP_ENHANCED_FRAMING;
 	}
@@ -697,6 +717,51 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	}
 }
 
+static void ironlake_edp_panel_on (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+	u32 pp, pp_status;
+
+	pp_status = I915_READ(PCH_PP_STATUS);
+	if (pp_status & PP_ON)
+		return;
+
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	do {
+		pp_status = I915_READ(PCH_PP_STATUS);
+	} while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout));
+
+	if (time_after(jiffies, timeout))
+		DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status);
+
+	pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD);
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void ironlake_edp_panel_off (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+	u32 pp, pp_status;
+
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp &= ~POWER_TARGET_ON;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	do {
+		pp_status = I915_READ(PCH_PP_STATUS);
+	} while ((pp_status & PP_ON) && !time_after(jiffies, timeout));
+
+	if (time_after(jiffies, timeout))
+		DRM_DEBUG_KMS("panel off wait timed out\n");
+
+	/* Make sure VDD is enabled so DP AUX will work */
+	pp |= EDP_FORCE_VDD;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
 static void ironlake_edp_backlight_on (struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -731,14 +796,18 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	if (mode != DRM_MODE_DPMS_ON) {
 		if (dp_reg & DP_PORT_EN) {
 			intel_dp_link_down(intel_encoder, dp_priv->DP);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder)) {
 				ironlake_edp_backlight_off(dev);
+				ironlake_edp_panel_off(dev);
+			}
 		}
 	} else {
 		if (!(dp_reg & DP_PORT_EN)) {
 			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder)) {
+				ironlake_edp_panel_on(dev);
 				ironlake_edp_backlight_on(dev);
+			}
 		}
 	}
 	dp_priv->dpms_mode = mode;
@@ -1208,6 +1277,8 @@ ironlake_dp_detect(struct drm_connector *connector)
 		if (dp_priv->dpcd[0] != 0)
 			status = connector_status_connected;
 	}
+	DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", dp_priv->dpcd[0],
+		      dp_priv->dpcd[1], dp_priv->dpcd[2], dp_priv->dpcd[3]);
 	return status;
 }
 
@@ -1352,7 +1423,7 @@ intel_trans_dp_port_sel (struct drm_crtc *crtc)
 	struct intel_encoder *intel_encoder = NULL;
 
 	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
-		if (!encoder || encoder->crtc != crtc)
+		if (encoder->crtc != crtc)
 			continue;
 
 		intel_encoder = enc_to_intel_encoder(encoder);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index df931f78766..2f7970be905 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -215,6 +215,9 @@ extern void intel_init_clock_gating(struct drm_device *dev);
 extern void ironlake_enable_drps(struct drm_device *dev);
 extern void ironlake_disable_drps(struct drm_device *dev);
 
+extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
+				      struct drm_gem_object *obj);
+
 extern int intel_framebuffer_init(struct drm_device *dev,
 				  struct intel_framebuffer *ifb,
 				  struct drm_mode_fb_cmd *mode_cmd,
@@ -224,6 +227,7 @@ extern void intel_fbdev_fini(struct drm_device *dev);
 
 extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
 extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
+extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
 
 extern void intel_setup_overlay(struct drm_device *dev);
 extern void intel_cleanup_overlay(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 6f53cf7fbc5..3e18c9e7729 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -98,14 +98,18 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_pin(fbo, 64*1024);
+	ret = intel_pin_and_fence_fb_obj(dev, fbo);
 	if (ret) {
 		DRM_ERROR("failed to pin fb: %d\n", ret);
 		goto out_unref;
 	}
 
 	/* Flush everything out, we'll be doing GTT only from now on */
-	i915_gem_object_set_to_gtt_domain(fbo, 1);
+	ret = i915_gem_object_set_to_gtt_domain(fbo, 1);
+	if (ret) {
+		DRM_ERROR("failed to bind fb: %d.\n", ret);
+		goto out_unpin;
+	}
 
 	info = framebuffer_alloc(0, device);
 	if (!info) {
@@ -232,7 +236,7 @@ int intel_fbdev_destroy(struct drm_device *dev,
 
 	drm_framebuffer_cleanup(&ifb->base);
 	if (ifb->obj)
-		drm_gem_object_unreference_unlocked(ifb->obj);
+		drm_gem_object_unreference(ifb->obj);
 
 	return 0;
 }
@@ -241,6 +245,7 @@ int intel_fbdev_init(struct drm_device *dev)
 {
 	struct intel_fbdev *ifbdev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
 
 	ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
 	if (!ifbdev)
@@ -249,8 +254,13 @@ int intel_fbdev_init(struct drm_device *dev)
 	dev_priv->fbdev = ifbdev;
 	ifbdev->helper.funcs = &intel_fb_helper_funcs;
 
-	drm_fb_helper_init(dev, &ifbdev->helper, 2,
-			   INTELFB_CONN_LIMIT);
+	ret = drm_fb_helper_init(dev, &ifbdev->helper,
+				 dev_priv->num_pipe,
+				 INTELFB_CONN_LIMIT);
+	if (ret) {
+		kfree(ifbdev);
+		return ret;
+	}
 
 	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
 	drm_fb_helper_initial_config(&ifbdev->helper, 32);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 65727f0a79a..83bd764b000 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -59,8 +59,11 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 		SDVO_VSYNC_ACTIVE_HIGH |
 		SDVO_HSYNC_ACTIVE_HIGH;
 
-	if (hdmi_priv->has_hdmi_sink)
+	if (hdmi_priv->has_hdmi_sink) {
 		sdvox |= SDVO_AUDIO_ENABLE;
+		if (HAS_PCH_CPT(dev))
+			sdvox |= HDMI_MODE_SELECT;
+	}
 
 	if (intel_crtc->pipe == 1) {
 		if (HAS_PCH_CPT(dev))
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6a1accd83ae..0eab8df5bf7 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -599,6 +599,26 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
 	return 0;
 }
 
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+	return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+	{
+		.callback = intel_no_modeset_on_lid_dmi_callback,
+		.ident = "Toshiba Tecra A11",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
 /*
  * Lid events. Note the use of 'modeset_on_lid':
  *  - we set it on lid close, and reset it on open
@@ -622,6 +642,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	 */
 	if (connector)
 		connector->status = connector->funcs->detect(connector);
+	/* Don't force modeset on machines where it causes a GPU lockup */
+	if (dmi_check_system(intel_no_modeset_on_lid))
+		return NOTIFY_OK;
 	if (!acpi_lid_open()) {
 		dev_priv->modeset_on_lid = 1;
 		return NOTIFY_OK;
@@ -983,8 +1006,8 @@ void intel_lvds_init(struct drm_device *dev)
 
 	drm_connector_attach_property(&intel_connector->base,
 				      dev->mode_config.scaling_mode_property,
-				      DRM_MODE_SCALE_FULLSCREEN);
-	lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
+				      DRM_MODE_SCALE_ASPECT);
+	lvds_priv->fitting_mode = DRM_MODE_SCALE_ASPECT;
 	/*
 	 * LVDS discovery:
 	 * 1) check for EDID on DDC
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index b0e17b06eb6..d7ad5139d17 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -211,9 +211,8 @@ static void intel_overlay_unmap_regs_atomic(struct intel_overlay *overlay)
 static int intel_overlay_on(struct intel_overlay *overlay)
 {
 	struct drm_device *dev = overlay->dev;
-        drm_i915_private_t *dev_priv = dev->dev_private;
 	int ret;
-	RING_LOCALS;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	BUG_ON(overlay->active);
 
@@ -227,11 +226,13 @@ static int intel_overlay_on(struct intel_overlay *overlay)
 	OUT_RING(MI_NOOP);
 	ADVANCE_LP_RING();
 
-	overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+	overlay->last_flip_req =
+		i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 	if (overlay->last_flip_req == 0)
 		return -ENOMEM;
 
-	ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+	ret = i915_do_wait_request(dev,
+			overlay->last_flip_req, 1, &dev_priv->render_ring);
 	if (ret != 0)
 		return ret;
 
@@ -248,7 +249,6 @@ static void intel_overlay_continue(struct intel_overlay *overlay,
         drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 flip_addr = overlay->flip_addr;
 	u32 tmp;
-	RING_LOCALS;
 
 	BUG_ON(!overlay->active);
 
@@ -265,7 +265,8 @@ static void intel_overlay_continue(struct intel_overlay *overlay,
 	OUT_RING(flip_addr);
         ADVANCE_LP_RING();
 
-	overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+	overlay->last_flip_req =
+		i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 }
 
 static int intel_overlay_wait_flip(struct intel_overlay *overlay)
@@ -274,10 +275,10 @@ static int intel_overlay_wait_flip(struct intel_overlay *overlay)
         drm_i915_private_t *dev_priv = dev->dev_private;
 	int ret;
 	u32 tmp;
-	RING_LOCALS;
 
 	if (overlay->last_flip_req != 0) {
-		ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+		ret = i915_do_wait_request(dev, overlay->last_flip_req,
+				1, &dev_priv->render_ring);
 		if (ret == 0) {
 			overlay->last_flip_req = 0;
 
@@ -296,11 +297,13 @@ static int intel_overlay_wait_flip(struct intel_overlay *overlay)
         OUT_RING(MI_NOOP);
         ADVANCE_LP_RING();
 
-	overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+	overlay->last_flip_req =
+		i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 	if (overlay->last_flip_req == 0)
 		return -ENOMEM;
 
-	ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+	ret = i915_do_wait_request(dev, overlay->last_flip_req,
+			1, &dev_priv->render_ring);
 	if (ret != 0)
 		return ret;
 
@@ -314,9 +317,8 @@ static int intel_overlay_off(struct intel_overlay *overlay)
 {
 	u32 flip_addr = overlay->flip_addr;
 	struct drm_device *dev = overlay->dev;
-        drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	int ret;
-	RING_LOCALS;
 
 	BUG_ON(!overlay->active);
 
@@ -336,11 +338,13 @@ static int intel_overlay_off(struct intel_overlay *overlay)
         OUT_RING(MI_NOOP);
         ADVANCE_LP_RING();
 
-	overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+	overlay->last_flip_req =
+		i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 	if (overlay->last_flip_req == 0)
 		return -ENOMEM;
 
-	ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+	ret = i915_do_wait_request(dev, overlay->last_flip_req,
+			1, &dev_priv->render_ring);
 	if (ret != 0)
 		return ret;
 
@@ -354,11 +358,13 @@ static int intel_overlay_off(struct intel_overlay *overlay)
         OUT_RING(MI_NOOP);
 	ADVANCE_LP_RING();
 
-	overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+	overlay->last_flip_req =
+		i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 	if (overlay->last_flip_req == 0)
 		return -ENOMEM;
 
-	ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+	ret = i915_do_wait_request(dev, overlay->last_flip_req,
+			1, &dev_priv->render_ring);
 	if (ret != 0)
 		return ret;
 
@@ -390,22 +396,23 @@ int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay,
 					 int interruptible)
 {
 	struct drm_device *dev = overlay->dev;
-        drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_gem_object *obj;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 flip_addr;
 	int ret;
-	RING_LOCALS;
 
 	if (overlay->hw_wedged == HW_WEDGED)
 		return -EIO;
 
 	if (overlay->last_flip_req == 0) {
-		overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+		overlay->last_flip_req =
+			i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
 		if (overlay->last_flip_req == 0)
 			return -ENOMEM;
 	}
 
-	ret = i915_do_wait_request(dev, overlay->last_flip_req, interruptible);
+	ret = i915_do_wait_request(dev, overlay->last_flip_req,
+			interruptible, &dev_priv->render_ring);
 	if (ret != 0)
 		return ret;
 
@@ -429,12 +436,13 @@ int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay,
 			OUT_RING(MI_NOOP);
 			ADVANCE_LP_RING();
 
-			overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+			overlay->last_flip_req = i915_add_request(dev, NULL,
+					0, &dev_priv->render_ring);
 			if (overlay->last_flip_req == 0)
 				return -ENOMEM;
 
 			ret = i915_do_wait_request(dev, overlay->last_flip_req,
-					interruptible);
+					interruptible, &dev_priv->render_ring);
 			if (ret != 0)
 				return ret;
 
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
new file mode 100644
index 00000000000..26362f8495a
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -0,0 +1,851 @@
+/*
+ * Copyright © 2008-2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *    Zou Nan hai <nanhai.zou@intel.com>
+ *    Xiang Hai hao<haihao.xiang@intel.com>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drv.h"
+#include "i915_drm.h"
+#include "i915_trace.h"
+
+static void
+render_ring_flush(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		u32	invalidate_domains,
+		u32	flush_domains)
+{
+#if WATCH_EXEC
+	DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
+		  invalidate_domains, flush_domains);
+#endif
+	u32 cmd;
+	trace_i915_gem_request_flush(dev, ring->next_seqno,
+				     invalidate_domains, flush_domains);
+
+	if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
+		/*
+		 * read/write caches:
+		 *
+		 * I915_GEM_DOMAIN_RENDER is always invalidated, but is
+		 * only flushed if MI_NO_WRITE_FLUSH is unset.  On 965, it is
+		 * also flushed at 2d versus 3d pipeline switches.
+		 *
+		 * read-only caches:
+		 *
+		 * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
+		 * MI_READ_FLUSH is set, and is always flushed on 965.
+		 *
+		 * I915_GEM_DOMAIN_COMMAND may not exist?
+		 *
+		 * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
+		 * invalidated when MI_EXE_FLUSH is set.
+		 *
+		 * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
+		 * invalidated with every MI_FLUSH.
+		 *
+		 * TLBs:
+		 *
+		 * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
+		 * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
+		 * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
+		 * are flushed at any MI_FLUSH.
+		 */
+
+		cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
+		if ((invalidate_domains|flush_domains) &
+		    I915_GEM_DOMAIN_RENDER)
+			cmd &= ~MI_NO_WRITE_FLUSH;
+		if (!IS_I965G(dev)) {
+			/*
+			 * On the 965, the sampler cache always gets flushed
+			 * and this bit is reserved.
+			 */
+			if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
+				cmd |= MI_READ_FLUSH;
+		}
+		if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
+			cmd |= MI_EXE_FLUSH;
+
+#if WATCH_EXEC
+		DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
+#endif
+		intel_ring_begin(dev, ring, 2);
+		intel_ring_emit(dev, ring, cmd);
+		intel_ring_emit(dev, ring, MI_NOOP);
+		intel_ring_advance(dev, ring);
+	}
+}
+
+static unsigned int render_ring_get_head(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	return I915_READ(PRB0_HEAD) & HEAD_ADDR;
+}
+
+static unsigned int render_ring_get_tail(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	return I915_READ(PRB0_TAIL) & TAIL_ADDR;
+}
+
+static unsigned int render_ring_get_active_head(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD;
+
+	return I915_READ(acthd_reg);
+}
+
+static void render_ring_advance_ring(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	I915_WRITE(PRB0_TAIL, ring->tail);
+}
+
+static int init_ring_common(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	u32 head;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv;
+	obj_priv = to_intel_bo(ring->gem_object);
+
+	/* Stop the ring if it's running. */
+	I915_WRITE(ring->regs.ctl, 0);
+	I915_WRITE(ring->regs.head, 0);
+	I915_WRITE(ring->regs.tail, 0);
+
+	/* Initialize the ring. */
+	I915_WRITE(ring->regs.start, obj_priv->gtt_offset);
+	head = ring->get_head(dev, ring);
+
+	/* G45 ring initialization fails to reset head to zero */
+	if (head != 0) {
+		DRM_ERROR("%s head not reset to zero "
+				"ctl %08x head %08x tail %08x start %08x\n",
+				ring->name,
+				I915_READ(ring->regs.ctl),
+				I915_READ(ring->regs.head),
+				I915_READ(ring->regs.tail),
+				I915_READ(ring->regs.start));
+
+		I915_WRITE(ring->regs.head, 0);
+
+		DRM_ERROR("%s head forced to zero "
+				"ctl %08x head %08x tail %08x start %08x\n",
+				ring->name,
+				I915_READ(ring->regs.ctl),
+				I915_READ(ring->regs.head),
+				I915_READ(ring->regs.tail),
+				I915_READ(ring->regs.start));
+	}
+
+	I915_WRITE(ring->regs.ctl,
+			((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
+			| RING_NO_REPORT | RING_VALID);
+
+	head = I915_READ(ring->regs.head) & HEAD_ADDR;
+	/* If the head is still not zero, the ring is dead */
+	if (head != 0) {
+		DRM_ERROR("%s initialization failed "
+				"ctl %08x head %08x tail %08x start %08x\n",
+				ring->name,
+				I915_READ(ring->regs.ctl),
+				I915_READ(ring->regs.head),
+				I915_READ(ring->regs.tail),
+				I915_READ(ring->regs.start));
+		return -EIO;
+	}
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		i915_kernel_lost_context(dev);
+	else {
+		ring->head = ring->get_head(dev, ring);
+		ring->tail = ring->get_tail(dev, ring);
+		ring->space = ring->head - (ring->tail + 8);
+		if (ring->space < 0)
+			ring->space += ring->size;
+	}
+	return 0;
+}
+
+static int init_render_ring(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret = init_ring_common(dev, ring);
+	if (IS_I9XX(dev) && !IS_GEN3(dev)) {
+		I915_WRITE(MI_MODE,
+				(VS_TIMER_DISPATCH) << 16 | VS_TIMER_DISPATCH);
+	}
+	return ret;
+}
+
+#define PIPE_CONTROL_FLUSH(addr)					\
+do {									\
+	OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |		\
+		 PIPE_CONTROL_DEPTH_STALL | 2);				\
+	OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT);			\
+	OUT_RING(0);							\
+	OUT_RING(0);							\
+} while (0)
+
+/**
+ * Creates a new sequence number, emitting a write of it to the status page
+ * plus an interrupt, which will trigger i915_user_interrupt_handler.
+ *
+ * Must be called with struct_lock held.
+ *
+ * Returned sequence numbers are nonzero on success.
+ */
+static u32
+render_ring_add_request(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		struct drm_file *file_priv,
+		u32 flush_domains)
+{
+	u32 seqno;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	seqno = intel_ring_get_seqno(dev, ring);
+
+	if (IS_GEN6(dev)) {
+		BEGIN_LP_RING(6);
+		OUT_RING(GFX_OP_PIPE_CONTROL | 3);
+		OUT_RING(PIPE_CONTROL_QW_WRITE |
+			 PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_IS_FLUSH |
+			 PIPE_CONTROL_NOTIFY);
+		OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+		OUT_RING(seqno);
+		OUT_RING(0);
+		OUT_RING(0);
+		ADVANCE_LP_RING();
+	} else if (HAS_PIPE_CONTROL(dev)) {
+		u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
+
+		/*
+		 * Workaround qword write incoherence by flushing the
+		 * PIPE_NOTIFY buffers out to memory before requesting
+		 * an interrupt.
+		 */
+		BEGIN_LP_RING(32);
+		OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+			 PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
+		OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+		OUT_RING(seqno);
+		OUT_RING(0);
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		scratch_addr += 128; /* write to separate cachelines */
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		scratch_addr += 128;
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		scratch_addr += 128;
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		scratch_addr += 128;
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		scratch_addr += 128;
+		PIPE_CONTROL_FLUSH(scratch_addr);
+		OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+			 PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
+			 PIPE_CONTROL_NOTIFY);
+		OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+		OUT_RING(seqno);
+		OUT_RING(0);
+		ADVANCE_LP_RING();
+	} else {
+		BEGIN_LP_RING(4);
+		OUT_RING(MI_STORE_DWORD_INDEX);
+		OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+		OUT_RING(seqno);
+
+		OUT_RING(MI_USER_INTERRUPT);
+		ADVANCE_LP_RING();
+	}
+	return seqno;
+}
+
+static u32
+render_ring_get_gem_seqno(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	if (HAS_PIPE_CONTROL(dev))
+		return ((volatile u32 *)(dev_priv->seqno_page))[0];
+	else
+		return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static void
+render_ring_get_user_irq(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	if (dev->irq_enabled && (++ring->user_irq_refcount == 1)) {
+		if (HAS_PCH_SPLIT(dev))
+			ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
+		else
+			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+}
+
+static void
+render_ring_put_user_irq(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	BUG_ON(dev->irq_enabled && ring->user_irq_refcount <= 0);
+	if (dev->irq_enabled && (--ring->user_irq_refcount == 0)) {
+		if (HAS_PCH_SPLIT(dev))
+			ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
+		else
+			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+}
+
+static void render_setup_status_page(struct drm_device *dev,
+	struct	intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	if (IS_GEN6(dev)) {
+		I915_WRITE(HWS_PGA_GEN6, ring->status_page.gfx_addr);
+		I915_READ(HWS_PGA_GEN6); /* posting read */
+	} else {
+		I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
+		I915_READ(HWS_PGA); /* posting read */
+	}
+
+}
+
+void
+bsd_ring_flush(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		u32     invalidate_domains,
+		u32     flush_domains)
+{
+	intel_ring_begin(dev, ring, 2);
+	intel_ring_emit(dev, ring, MI_FLUSH);
+	intel_ring_emit(dev, ring, MI_NOOP);
+	intel_ring_advance(dev, ring);
+}
+
+static inline unsigned int bsd_ring_get_head(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	return I915_READ(BSD_RING_HEAD) & HEAD_ADDR;
+}
+
+static inline unsigned int bsd_ring_get_tail(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	return I915_READ(BSD_RING_TAIL) & TAIL_ADDR;
+}
+
+static inline unsigned int bsd_ring_get_active_head(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	return I915_READ(BSD_RING_ACTHD);
+}
+
+static inline void bsd_ring_advance_ring(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	I915_WRITE(BSD_RING_TAIL, ring->tail);
+}
+
+static int init_bsd_ring(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	return init_ring_common(dev, ring);
+}
+
+static u32
+bsd_ring_add_request(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		struct drm_file *file_priv,
+		u32 flush_domains)
+{
+	u32 seqno;
+	seqno = intel_ring_get_seqno(dev, ring);
+	intel_ring_begin(dev, ring, 4);
+	intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(dev, ring,
+			I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(dev, ring, seqno);
+	intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+	intel_ring_advance(dev, ring);
+
+	DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+
+	return seqno;
+}
+
+static void bsd_setup_status_page(struct drm_device *dev,
+		struct  intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	I915_WRITE(BSD_HWS_PGA, ring->status_page.gfx_addr);
+	I915_READ(BSD_HWS_PGA);
+}
+
+static void
+bsd_ring_get_user_irq(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	/* do nothing */
+}
+static void
+bsd_ring_put_user_irq(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	/* do nothing */
+}
+
+static u32
+bsd_ring_get_gem_seqno(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static int
+bsd_ring_dispatch_gem_execbuffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		struct drm_i915_gem_execbuffer2 *exec,
+		struct drm_clip_rect *cliprects,
+		uint64_t exec_offset)
+{
+	uint32_t exec_start;
+	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+	intel_ring_begin(dev, ring, 2);
+	intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START |
+			(2 << 6) | MI_BATCH_NON_SECURE_I965);
+	intel_ring_emit(dev, ring, exec_start);
+	intel_ring_advance(dev, ring);
+	return 0;
+}
+
+
+static int
+render_ring_dispatch_gem_execbuffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		struct drm_i915_gem_execbuffer2 *exec,
+		struct drm_clip_rect *cliprects,
+		uint64_t exec_offset)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int nbox = exec->num_cliprects;
+	int i = 0, count;
+	uint32_t exec_start, exec_len;
+	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+	exec_len = (uint32_t) exec->batch_len;
+
+	trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
+
+	count = nbox ? nbox : 1;
+
+	for (i = 0; i < count; i++) {
+		if (i < nbox) {
+			int ret = i915_emit_box(dev, cliprects, i,
+						exec->DR1, exec->DR4);
+			if (ret)
+				return ret;
+		}
+
+		if (IS_I830(dev) || IS_845G(dev)) {
+			intel_ring_begin(dev, ring, 4);
+			intel_ring_emit(dev, ring, MI_BATCH_BUFFER);
+			intel_ring_emit(dev, ring,
+					exec_start | MI_BATCH_NON_SECURE);
+			intel_ring_emit(dev, ring, exec_start + exec_len - 4);
+			intel_ring_emit(dev, ring, 0);
+		} else {
+			intel_ring_begin(dev, ring, 4);
+			if (IS_I965G(dev)) {
+				intel_ring_emit(dev, ring,
+						MI_BATCH_BUFFER_START | (2 << 6)
+						| MI_BATCH_NON_SECURE_I965);
+				intel_ring_emit(dev, ring, exec_start);
+			} else {
+				intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START
+						| (2 << 6));
+				intel_ring_emit(dev, ring, exec_start |
+						MI_BATCH_NON_SECURE);
+			}
+		}
+		intel_ring_advance(dev, ring);
+	}
+
+	/* XXX breadcrumb */
+	return 0;
+}
+
+static void cleanup_status_page(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+
+	obj = ring->status_page.obj;
+	if (obj == NULL)
+		return;
+	obj_priv = to_intel_bo(obj);
+
+	kunmap(obj_priv->pages[0]);
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(obj);
+	ring->status_page.obj = NULL;
+
+	memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+}
+
+static int init_status_page(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	obj = i915_gem_alloc_object(dev, 4096);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate status page\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	obj_priv = to_intel_bo(obj);
+	obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
+
+	ret = i915_gem_object_pin(obj, 4096);
+	if (ret != 0) {
+		goto err_unref;
+	}
+
+	ring->status_page.gfx_addr = obj_priv->gtt_offset;
+	ring->status_page.page_addr = kmap(obj_priv->pages[0]);
+	if (ring->status_page.page_addr == NULL) {
+		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+		goto err_unpin;
+	}
+	ring->status_page.obj = obj;
+	memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+
+	ring->setup_status_page(dev, ring);
+	DRM_DEBUG_DRIVER("%s hws offset: 0x%08x\n",
+			ring->name, ring->status_page.gfx_addr);
+
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_unref:
+	drm_gem_object_unreference(obj);
+err:
+	return ret;
+}
+
+
+int intel_init_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	int ret;
+	struct drm_i915_gem_object *obj_priv;
+	struct drm_gem_object *obj;
+	ring->dev = dev;
+
+	if (I915_NEED_GFX_HWS(dev)) {
+		ret = init_status_page(dev, ring);
+		if (ret)
+			return ret;
+	}
+
+	obj = i915_gem_alloc_object(dev, ring->size);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate ringbuffer\n");
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	ring->gem_object = obj;
+
+	ret = i915_gem_object_pin(obj, ring->alignment);
+	if (ret != 0) {
+		drm_gem_object_unreference(obj);
+		goto cleanup;
+	}
+
+	obj_priv = to_intel_bo(obj);
+	ring->map.size = ring->size;
+	ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
+	ring->map.type = 0;
+	ring->map.flags = 0;
+	ring->map.mtrr = 0;
+
+	drm_core_ioremap_wc(&ring->map, dev);
+	if (ring->map.handle == NULL) {
+		DRM_ERROR("Failed to map ringbuffer.\n");
+		i915_gem_object_unpin(obj);
+		drm_gem_object_unreference(obj);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	ring->virtual_start = ring->map.handle;
+	ret = ring->init(dev, ring);
+	if (ret != 0) {
+		intel_cleanup_ring_buffer(dev, ring);
+		return ret;
+	}
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		i915_kernel_lost_context(dev);
+	else {
+		ring->head = ring->get_head(dev, ring);
+		ring->tail = ring->get_tail(dev, ring);
+		ring->space = ring->head - (ring->tail + 8);
+		if (ring->space < 0)
+			ring->space += ring->size;
+	}
+	INIT_LIST_HEAD(&ring->active_list);
+	INIT_LIST_HEAD(&ring->request_list);
+	return ret;
+cleanup:
+	cleanup_status_page(dev, ring);
+	return ret;
+}
+
+void intel_cleanup_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	if (ring->gem_object == NULL)
+		return;
+
+	drm_core_ioremapfree(&ring->map, dev);
+
+	i915_gem_object_unpin(ring->gem_object);
+	drm_gem_object_unreference(ring->gem_object);
+	ring->gem_object = NULL;
+	cleanup_status_page(dev, ring);
+}
+
+int intel_wrap_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	unsigned int *virt;
+	int rem;
+	rem = ring->size - ring->tail;
+
+	if (ring->space < rem) {
+		int ret = intel_wait_ring_buffer(dev, ring, rem);
+		if (ret)
+			return ret;
+	}
+
+	virt = (unsigned int *)(ring->virtual_start + ring->tail);
+	rem /= 4;
+	while (rem--)
+		*virt++ = MI_NOOP;
+
+	ring->tail = 0;
+	ring->space = ring->head - 8;
+
+	return 0;
+}
+
+int intel_wait_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring, int n)
+{
+	unsigned long end;
+
+	trace_i915_ring_wait_begin (dev);
+	end = jiffies + 3 * HZ;
+	do {
+		ring->head = ring->get_head(dev, ring);
+		ring->space = ring->head - (ring->tail + 8);
+		if (ring->space < 0)
+			ring->space += ring->size;
+		if (ring->space >= n) {
+			trace_i915_ring_wait_end (dev);
+			return 0;
+		}
+
+		if (dev->primary->master) {
+			struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+			if (master_priv->sarea_priv)
+				master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
+		}
+
+		yield();
+	} while (!time_after(jiffies, end));
+	trace_i915_ring_wait_end (dev);
+	return -EBUSY;
+}
+
+void intel_ring_begin(struct drm_device *dev,
+		struct intel_ring_buffer *ring, int num_dwords)
+{
+	int n = 4*num_dwords;
+	if (unlikely(ring->tail + n > ring->size))
+		intel_wrap_ring_buffer(dev, ring);
+	if (unlikely(ring->space < n))
+		intel_wait_ring_buffer(dev, ring, n);
+}
+
+void intel_ring_emit(struct drm_device *dev,
+		struct intel_ring_buffer *ring, unsigned int data)
+{
+	unsigned int *virt = ring->virtual_start + ring->tail;
+	*virt = data;
+	ring->tail += 4;
+	ring->tail &= ring->size - 1;
+	ring->space -= 4;
+}
+
+void intel_ring_advance(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	ring->advance_ring(dev, ring);
+}
+
+void intel_fill_struct(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		void *data,
+		unsigned int len)
+{
+	unsigned int *virt = ring->virtual_start + ring->tail;
+	BUG_ON((len&~(4-1)) != 0);
+	intel_ring_begin(dev, ring, len/4);
+	memcpy(virt, data, len);
+	ring->tail += len;
+	ring->tail &= ring->size - 1;
+	ring->space -= len;
+	intel_ring_advance(dev, ring);
+}
+
+u32 intel_ring_get_seqno(struct drm_device *dev,
+		struct intel_ring_buffer *ring)
+{
+	u32 seqno;
+	seqno = ring->next_seqno;
+
+	/* reserve 0 for non-seqno */
+	if (++ring->next_seqno == 0)
+		ring->next_seqno = 1;
+	return seqno;
+}
+
+struct intel_ring_buffer render_ring = {
+	.name			= "render ring",
+	.regs                   = {
+		.ctl = PRB0_CTL,
+		.head = PRB0_HEAD,
+		.tail = PRB0_TAIL,
+		.start = PRB0_START
+	},
+	.ring_flag		= I915_EXEC_RENDER,
+	.size			= 32 * PAGE_SIZE,
+	.alignment		= PAGE_SIZE,
+	.virtual_start		= NULL,
+	.dev			= NULL,
+	.gem_object		= NULL,
+	.head			= 0,
+	.tail			= 0,
+	.space			= 0,
+	.next_seqno		= 1,
+	.user_irq_refcount	= 0,
+	.irq_gem_seqno		= 0,
+	.waiting_gem_seqno	= 0,
+	.setup_status_page	= render_setup_status_page,
+	.init			= init_render_ring,
+	.get_head		= render_ring_get_head,
+	.get_tail		= render_ring_get_tail,
+	.get_active_head	= render_ring_get_active_head,
+	.advance_ring		= render_ring_advance_ring,
+	.flush			= render_ring_flush,
+	.add_request		= render_ring_add_request,
+	.get_gem_seqno		= render_ring_get_gem_seqno,
+	.user_irq_get		= render_ring_get_user_irq,
+	.user_irq_put		= render_ring_put_user_irq,
+	.dispatch_gem_execbuffer = render_ring_dispatch_gem_execbuffer,
+	.status_page		= {NULL, 0, NULL},
+	.map			= {0,}
+};
+
+/* ring buffer for bit-stream decoder */
+
+struct intel_ring_buffer bsd_ring = {
+	.name                   = "bsd ring",
+	.regs			= {
+		.ctl = BSD_RING_CTL,
+		.head = BSD_RING_HEAD,
+		.tail = BSD_RING_TAIL,
+		.start = BSD_RING_START
+	},
+	.ring_flag		= I915_EXEC_BSD,
+	.size			= 32 * PAGE_SIZE,
+	.alignment		= PAGE_SIZE,
+	.virtual_start		= NULL,
+	.dev			= NULL,
+	.gem_object		= NULL,
+	.head			= 0,
+	.tail			= 0,
+	.space			= 0,
+	.next_seqno		= 1,
+	.user_irq_refcount	= 0,
+	.irq_gem_seqno		= 0,
+	.waiting_gem_seqno	= 0,
+	.setup_status_page	= bsd_setup_status_page,
+	.init			= init_bsd_ring,
+	.get_head		= bsd_ring_get_head,
+	.get_tail		= bsd_ring_get_tail,
+	.get_active_head	= bsd_ring_get_active_head,
+	.advance_ring		= bsd_ring_advance_ring,
+	.flush			= bsd_ring_flush,
+	.add_request		= bsd_ring_add_request,
+	.get_gem_seqno		= bsd_ring_get_gem_seqno,
+	.user_irq_get		= bsd_ring_get_user_irq,
+	.user_irq_put		= bsd_ring_put_user_irq,
+	.dispatch_gem_execbuffer = bsd_ring_dispatch_gem_execbuffer,
+	.status_page		= {NULL, 0, NULL},
+	.map			= {0,}
+};
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
new file mode 100644
index 00000000000..d5568d3766d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -0,0 +1,124 @@
+#ifndef _INTEL_RINGBUFFER_H_
+#define _INTEL_RINGBUFFER_H_
+
+struct  intel_hw_status_page {
+	void		*page_addr;
+	unsigned int	gfx_addr;
+	struct		drm_gem_object *obj;
+};
+
+struct drm_i915_gem_execbuffer2;
+struct  intel_ring_buffer {
+	const char	*name;
+	struct		ring_regs {
+			u32 ctl;
+			u32 head;
+			u32 tail;
+			u32 start;
+	} regs;
+	unsigned int	ring_flag;
+	unsigned long	size;
+	unsigned int	alignment;
+	void		*virtual_start;
+	struct		drm_device *dev;
+	struct		drm_gem_object *gem_object;
+
+	unsigned int	head;
+	unsigned int	tail;
+	unsigned int	space;
+	u32		next_seqno;
+	struct intel_hw_status_page status_page;
+
+	u32		irq_gem_seqno;		/* last seq seem at irq time */
+	u32		waiting_gem_seqno;
+	int		user_irq_refcount;
+	void		(*user_irq_get)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	void		(*user_irq_put)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	void		(*setup_status_page)(struct drm_device *dev,
+			struct	intel_ring_buffer *ring);
+
+	int		(*init)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+
+	unsigned int	(*get_head)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	unsigned int	(*get_tail)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	unsigned int	(*get_active_head)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	void		(*advance_ring)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	void		(*flush)(struct drm_device *dev,
+			struct intel_ring_buffer *ring,
+			u32	invalidate_domains,
+			u32	flush_domains);
+	u32		(*add_request)(struct drm_device *dev,
+			struct intel_ring_buffer *ring,
+			struct drm_file *file_priv,
+			u32 flush_domains);
+	u32		(*get_gem_seqno)(struct drm_device *dev,
+			struct intel_ring_buffer *ring);
+	int		(*dispatch_gem_execbuffer)(struct drm_device *dev,
+			struct intel_ring_buffer *ring,
+			struct drm_i915_gem_execbuffer2 *exec,
+			struct drm_clip_rect *cliprects,
+			uint64_t exec_offset);
+
+	/**
+	 * List of objects currently involved in rendering from the
+	 * ringbuffer.
+	 *
+	 * Includes buffers having the contents of their GPU caches
+	 * flushed, not necessarily primitives.  last_rendering_seqno
+	 * represents when the rendering involved will be completed.
+	 *
+	 * A reference is held on the buffer while on this list.
+	 */
+	struct list_head active_list;
+
+	/**
+	 * List of breadcrumbs associated with GPU requests currently
+	 * outstanding.
+	 */
+	struct list_head request_list;
+
+	wait_queue_head_t irq_queue;
+	drm_local_map_t map;
+};
+
+static inline u32
+intel_read_status_page(struct intel_ring_buffer *ring,
+		int reg)
+{
+	u32 *regs = ring->status_page.page_addr;
+	return regs[reg];
+}
+
+int intel_init_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
+void intel_cleanup_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
+int intel_wait_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring, int n);
+int intel_wrap_ring_buffer(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
+void intel_ring_begin(struct drm_device *dev,
+		struct intel_ring_buffer *ring, int n);
+void intel_ring_emit(struct drm_device *dev,
+		struct intel_ring_buffer *ring, u32 data);
+void intel_fill_struct(struct drm_device *dev,
+		struct intel_ring_buffer *ring,
+		void *data,
+		unsigned int len);
+void intel_ring_advance(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
+
+u32 intel_ring_get_seqno(struct drm_device *dev,
+		struct intel_ring_buffer *ring);
+
+extern struct intel_ring_buffer render_ring;
+extern struct intel_ring_buffer bsd_ring;
+
+#endif /* _INTEL_RINGBUFFER_H_ */
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index aba72c489a2..76993ac16cc 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1479,7 +1479,7 @@ intel_find_analog_connector(struct drm_device *dev)
 		intel_encoder = enc_to_intel_encoder(encoder);
 		if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
 			list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-				if (connector && encoder == intel_attached_encoder(connector))
+				if (encoder == intel_attached_encoder(connector))
 					return connector;
 			}
 		}
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index e13f6af0037..d4bcca8a513 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -34,7 +34,7 @@
 static struct nouveau_dsm_priv {
 	bool dsm_detected;
 	acpi_handle dhandle;
-	acpi_handle dsm_handle;
+	acpi_handle rom_handle;
 } nouveau_dsm_priv;
 
 static const char nouveau_dsm_muid[] = {
@@ -107,9 +107,9 @@ static int nouveau_dsm_set_discrete_state(acpi_handle handle, enum vga_switchero
 static int nouveau_dsm_switchto(enum vga_switcheroo_client_id id)
 {
 	if (id == VGA_SWITCHEROO_IGD)
-		return nouveau_dsm_switch_mux(nouveau_dsm_priv.dsm_handle, NOUVEAU_DSM_LED_STAMINA);
+		return nouveau_dsm_switch_mux(nouveau_dsm_priv.dhandle, NOUVEAU_DSM_LED_STAMINA);
 	else
-		return nouveau_dsm_switch_mux(nouveau_dsm_priv.dsm_handle, NOUVEAU_DSM_LED_SPEED);
+		return nouveau_dsm_switch_mux(nouveau_dsm_priv.dhandle, NOUVEAU_DSM_LED_SPEED);
 }
 
 static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id,
@@ -118,7 +118,7 @@ static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id,
 	if (id == VGA_SWITCHEROO_IGD)
 		return 0;
 
-	return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dsm_handle, state);
+	return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state);
 }
 
 static int nouveau_dsm_init(void)
@@ -151,18 +151,18 @@ static bool nouveau_dsm_pci_probe(struct pci_dev *pdev)
 	dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
 	if (!dhandle)
 		return false;
+
 	status = acpi_get_handle(dhandle, "_DSM", &nvidia_handle);
 	if (ACPI_FAILURE(status)) {
 		return false;
 	}
 
-	ret= nouveau_dsm(nvidia_handle, NOUVEAU_DSM_SUPPORTED,
-			 NOUVEAU_DSM_SUPPORTED_FUNCTIONS, &result);
+	ret = nouveau_dsm(dhandle, NOUVEAU_DSM_SUPPORTED,
+			  NOUVEAU_DSM_SUPPORTED_FUNCTIONS, &result);
 	if (ret < 0)
 		return false;
 
 	nouveau_dsm_priv.dhandle = dhandle;
-	nouveau_dsm_priv.dsm_handle = nvidia_handle;
 	return true;
 }
 
@@ -173,6 +173,7 @@ static bool nouveau_dsm_detect(void)
 	struct pci_dev *pdev = NULL;
 	int has_dsm = 0;
 	int vga_count = 0;
+
 	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) {
 		vga_count++;
 
@@ -180,7 +181,7 @@ static bool nouveau_dsm_detect(void)
 	}
 
 	if (vga_count == 2 && has_dsm) {
-		acpi_get_name(nouveau_dsm_priv.dsm_handle, ACPI_FULL_PATHNAME, &buffer);
+		acpi_get_name(nouveau_dsm_priv.dhandle, ACPI_FULL_PATHNAME, &buffer);
 		printk(KERN_INFO "VGA switcheroo: detected DSM switching method %s handle\n",
 		       acpi_method_name);
 		nouveau_dsm_priv.dsm_detected = true;
@@ -204,3 +205,57 @@ void nouveau_unregister_dsm_handler(void)
 {
 	vga_switcheroo_unregister_handler();
 }
+
+/* retrieve the ROM in 4k blocks */
+static int nouveau_rom_call(acpi_handle rom_handle, uint8_t *bios,
+			    int offset, int len)
+{
+	acpi_status status;
+	union acpi_object rom_arg_elements[2], *obj;
+	struct acpi_object_list rom_arg;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL};
+
+	rom_arg.count = 2;
+	rom_arg.pointer = &rom_arg_elements[0];
+
+	rom_arg_elements[0].type = ACPI_TYPE_INTEGER;
+	rom_arg_elements[0].integer.value = offset;
+
+	rom_arg_elements[1].type = ACPI_TYPE_INTEGER;
+	rom_arg_elements[1].integer.value = len;
+
+	status = acpi_evaluate_object(rom_handle, NULL, &rom_arg, &buffer);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_INFO "failed to evaluate ROM got %s\n", acpi_format_exception(status));
+		return -ENODEV;
+	}
+	obj = (union acpi_object *)buffer.pointer;
+	memcpy(bios+offset, obj->buffer.pointer, len);
+	kfree(buffer.pointer);
+	return len;
+}
+
+bool nouveau_acpi_rom_supported(struct pci_dev *pdev)
+{
+	acpi_status status;
+	acpi_handle dhandle, rom_handle;
+
+	if (!nouveau_dsm_priv.dsm_detected)
+		return false;
+
+	dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
+	if (!dhandle)
+		return false;
+
+	status = acpi_get_handle(dhandle, "_ROM", &rom_handle);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	nouveau_dsm_priv.rom_handle = rom_handle;
+	return true;
+}
+
+int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len)
+{
+	return nouveau_rom_call(nouveau_dsm_priv.rom_handle, bios, offset, len);
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index e7e69ccce5c..e492919faf4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -178,41 +178,51 @@ out:
 	pci_disable_rom(dev->pdev);
 }
 
+static void load_vbios_acpi(struct drm_device *dev, uint8_t *data)
+{
+	int i;
+	int ret;
+	int size = 64 * 1024;
+
+	if (!nouveau_acpi_rom_supported(dev->pdev))
+		return;
+
+	for (i = 0; i < (size / ROM_BIOS_PAGE); i++) {
+		ret = nouveau_acpi_get_bios_chunk(data,
+						  (i * ROM_BIOS_PAGE),
+						  ROM_BIOS_PAGE);
+		if (ret <= 0)
+			break;
+	}
+	return;
+}
+
 struct methods {
 	const char desc[8];
 	void (*loadbios)(struct drm_device *, uint8_t *);
 	const bool rw;
 };
 
-static struct methods nv04_methods[] = {
-	{ "PROM", load_vbios_prom, false },
-	{ "PRAMIN", load_vbios_pramin, true },
-	{ "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
+static struct methods shadow_methods[] = {
 	{ "PRAMIN", load_vbios_pramin, true },
 	{ "PROM", load_vbios_prom, false },
 	{ "PCIROM", load_vbios_pci, true },
+	{ "ACPI", load_vbios_acpi, true },
 };
 
-#define METHODCNT 3
-
 static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct methods *methods;
-	int i;
+	const int nr_methods = ARRAY_SIZE(shadow_methods);
+	struct methods *methods = shadow_methods;
 	int testscore = 3;
-	int scores[METHODCNT];
+	int scores[nr_methods], i;
 
 	if (nouveau_vbios) {
-		methods = nv04_methods;
-		for (i = 0; i < METHODCNT; i++)
+		for (i = 0; i < nr_methods; i++)
 			if (!strcasecmp(nouveau_vbios, methods[i].desc))
 				break;
 
-		if (i < METHODCNT) {
+		if (i < nr_methods) {
 			NV_INFO(dev, "Attempting to use BIOS image from %s\n",
 				methods[i].desc);
 
@@ -224,12 +234,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 		NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
 	}
 
-	if (dev_priv->card_type < NV_50)
-		methods = nv04_methods;
-	else
-		methods = nv50_methods;
-
-	for (i = 0; i < METHODCNT; i++) {
+	for (i = 0; i < nr_methods; i++) {
 		NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
 			 methods[i].desc);
 		data[0] = data[1] = 0;	/* avoid reuse of previous image */
@@ -240,7 +245,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 	}
 
 	while (--testscore > 0) {
-		for (i = 0; i < METHODCNT; i++) {
+		for (i = 0; i < nr_methods; i++) {
 			if (scores[i] == testscore) {
 				NV_TRACE(dev, "Using BIOS image from %s\n",
 					 methods[i].desc);
@@ -814,7 +819,7 @@ init_i2c_device_find(struct drm_device *dev, int i2c_index)
 	if (i2c_index == 0x81)
 		i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
 
-	if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) {
+	if (i2c_index >= DCB_MAX_NUM_I2C_ENTRIES) {
 		NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
 		return NULL;
 	}
@@ -2807,7 +2812,10 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 
 		BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
 
-		nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
+		BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
+			offset, gpio->tag, gpio->state_default);
+		if (bios->execute)
+			nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
 
 		/* The NVIDIA binary driver doesn't appear to actually do
 		 * any of this, my VBIOS does however.
@@ -3897,7 +3905,8 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
 
 static uint8_t *
 bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
-			 uint16_t record, int record_len, int record_nr)
+			 uint16_t record, int record_len, int record_nr,
+			 bool match_link)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->vbios;
@@ -3905,12 +3914,28 @@ bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
 	uint16_t table;
 	int i, v;
 
+	switch (dcbent->type) {
+	case OUTPUT_TMDS:
+	case OUTPUT_LVDS:
+	case OUTPUT_DP:
+		break;
+	default:
+		match_link = false;
+		break;
+	}
+
 	for (i = 0; i < record_nr; i++, record += record_len) {
 		table = ROM16(bios->data[record]);
 		if (!table)
 			continue;
 		entry = ROM32(bios->data[table]);
 
+		if (match_link) {
+			v = (entry & 0x00c00000) >> 22;
+			if (!(v & dcbent->sorconf.link))
+				continue;
+		}
+
 		v = (entry & 0x000f0000) >> 16;
 		if (!(v & dcbent->or))
 			continue;
@@ -3952,7 +3977,7 @@ nouveau_bios_dp_table(struct drm_device *dev, struct dcb_entry *dcbent,
 	*length = table[4];
 	return bios_output_config_match(dev, dcbent,
 					bios->display.dp_table_ptr + table[1],
-					table[2], table[3]);
+					table[2], table[3], table[0] >= 0x21);
 }
 
 int
@@ -4041,7 +4066,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent,
 			dcbent->type, dcbent->location, dcbent->or);
 	otable = bios_output_config_match(dev, dcbent, table[1] +
 					  bios->display.script_table_ptr,
-					  table[2], table[3]);
+					  table[2], table[3], table[0] >= 0x21);
 	if (!otable) {
 		NV_ERROR(dev, "Couldn't find matching output script table\n");
 		return 1;
@@ -5533,12 +5558,6 @@ parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
 	entry->bus = (conn >> 16) & 0xf;
 	entry->location = (conn >> 20) & 0x3;
 	entry->or = (conn >> 24) & 0xf;
-	/*
-	 * Normal entries consist of a single bit, but dual link has the
-	 * next most significant bit set too
-	 */
-	entry->duallink_possible =
-			((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
 
 	switch (entry->type) {
 	case OUTPUT_ANALOG:
@@ -5622,6 +5641,16 @@ parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
 		break;
 	}
 
+	if (dcb->version < 0x40) {
+		/* Normal entries consist of a single bit, but dual link has
+		 * the next most significant bit set too
+		 */
+		entry->duallink_possible =
+			((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
+	} else {
+		entry->duallink_possible = (entry->sorconf.link == 3);
+	}
+
 	/* unsure what DCB version introduces this, 3.0? */
 	if (conf & 0x100000)
 		entry->i2c_upper_default = true;
@@ -6205,6 +6234,30 @@ nouveau_bios_i2c_devices_takedown(struct drm_device *dev)
 		nouveau_i2c_fini(dev, entry);
 }
 
+static bool
+nouveau_bios_posted(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	bool was_locked;
+	unsigned htotal;
+
+	if (dev_priv->chipset >= NV_50) {
+		if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
+		    NVReadVgaCrtc(dev, 0, 0x1a) == 0)
+			return false;
+		return true;
+	}
+
+	was_locked = NVLockVgaCrtcs(dev, false);
+	htotal  = NVReadVgaCrtc(dev, 0, 0x06);
+	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
+	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
+	htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
+	htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
+	NVLockVgaCrtcs(dev, was_locked);
+	return (htotal != 0);
+}
+
 int
 nouveau_bios_init(struct drm_device *dev)
 {
@@ -6239,11 +6292,9 @@ nouveau_bios_init(struct drm_device *dev)
 	bios->execute = false;
 
 	/* ... unless card isn't POSTed already */
-	if (dev_priv->card_type >= NV_10 &&
-	    NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
-	    NVReadVgaCrtc(dev, 0, 0x1a) == 0) {
+	if (!nouveau_bios_posted(dev)) {
 		NV_INFO(dev, "Adaptor not initialised\n");
-		if (dev_priv->card_type < NV_50) {
+		if (dev_priv->card_type < NV_40) {
 			NV_ERROR(dev, "Unable to POST this chipset\n");
 			return -ENODEV;
 		}
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 266b0ff441a..149ed224c3c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -432,24 +432,27 @@ nouveau_connector_set_property(struct drm_connector *connector,
 }
 
 static struct drm_display_mode *
-nouveau_connector_native_mode(struct nouveau_connector *connector)
+nouveau_connector_native_mode(struct drm_connector *connector)
 {
-	struct drm_device *dev = connector->base.dev;
+	struct drm_connector_helper_funcs *helper = connector->helper_private;
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode, *largest = NULL;
 	int high_w = 0, high_h = 0, high_v = 0;
 
-	/* Use preferred mode if there is one.. */
-	list_for_each_entry(mode, &connector->base.probed_modes, head) {
+	list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
+		if (helper->mode_valid(connector, mode) != MODE_OK)
+			continue;
+
+		/* Use preferred mode if there is one.. */
 		if (mode->type & DRM_MODE_TYPE_PREFERRED) {
 			NV_DEBUG_KMS(dev, "native mode from preferred\n");
 			return drm_mode_duplicate(dev, mode);
 		}
-	}
 
-	/* Otherwise, take the resolution with the largest width, then height,
-	 * then vertical refresh
-	 */
-	list_for_each_entry(mode, &connector->base.probed_modes, head) {
+		/* Otherwise, take the resolution with the largest width, then
+		 * height, then vertical refresh
+		 */
 		if (mode->hdisplay < high_w)
 			continue;
 
@@ -553,7 +556,7 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 	 */
 	if (!nv_connector->native_mode)
 		nv_connector->native_mode =
-			nouveau_connector_native_mode(nv_connector);
+			nouveau_connector_native_mode(connector);
 	if (ret == 0 && nv_connector->native_mode) {
 		struct drm_display_mode *mode;
 
@@ -584,9 +587,9 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 
 	switch (nv_encoder->dcb->type) {
 	case OUTPUT_LVDS:
-		BUG_ON(!nv_connector->native_mode);
-		if (mode->hdisplay > nv_connector->native_mode->hdisplay ||
-		    mode->vdisplay > nv_connector->native_mode->vdisplay)
+		if (nv_connector->native_mode &&
+		    (mode->hdisplay > nv_connector->native_mode->hdisplay ||
+		     mode->vdisplay > nv_connector->native_mode->vdisplay))
 			return MODE_PANEL;
 
 		min_clock = 0;
@@ -594,8 +597,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 		break;
 	case OUTPUT_TMDS:
 		if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
-		    (dev_priv->card_type < NV_50 &&
-		     !nv_encoder->dcb->duallink_possible))
+		    !nv_encoder->dcb->duallink_possible)
 			max_clock = 165000;
 		else
 			max_clock = 330000;
@@ -729,7 +731,7 @@ nouveau_connector_create_lvds(struct drm_device *dev,
 	if (ret == 0)
 		goto out;
 	nv_connector->detected_encoder = nv_encoder;
-	nv_connector->native_mode = nouveau_connector_native_mode(nv_connector);
+	nv_connector->native_mode = nouveau_connector_native_mode(connector);
 	list_for_each_entry_safe(mode, temp, &connector->probed_modes, head)
 		drm_mode_remove(connector, mode);
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_crtc.h b/drivers/gpu/drm/nouveau/nouveau_crtc.h
index 49fa7b2d257..cb1ce2a0916 100644
--- a/drivers/gpu/drm/nouveau/nouveau_crtc.h
+++ b/drivers/gpu/drm/nouveau/nouveau_crtc.h
@@ -40,6 +40,8 @@ struct nouveau_crtc {
 	int sharpness;
 	int last_dpms;
 
+	int cursor_saved_x, cursor_saved_y;
+
 	struct {
 		int cpp;
 		bool blanked;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index c6079e36669..27377043229 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -175,6 +175,13 @@ nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state)
 		nouveau_bo_unpin(nouveau_fb->nvbo);
 	}
 
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+		nouveau_bo_unmap(nv_crtc->cursor.nvbo);
+		nouveau_bo_unpin(nv_crtc->cursor.nvbo);
+	}
+
 	NV_INFO(dev, "Evicting buffers...\n");
 	ttm_bo_evict_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
 
@@ -314,12 +321,34 @@ nouveau_pci_resume(struct pci_dev *pdev)
 		nouveau_bo_pin(nouveau_fb->nvbo, TTM_PL_FLAG_VRAM);
 	}
 
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+		int ret;
+
+		ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM);
+		if (!ret)
+			ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
+		if (ret)
+			NV_ERROR(dev, "Could not pin/map cursor.\n");
+	}
+
 	if (dev_priv->card_type < NV_50) {
 		nv04_display_restore(dev);
 		NVLockVgaCrtcs(dev, false);
 	} else
 		nv50_display_init(dev);
 
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+		nv_crtc->cursor.set_offset(nv_crtc,
+					nv_crtc->cursor.nvbo->bo.offset -
+					dev_priv->vm_vram_base);
+
+		nv_crtc->cursor.set_pos(nv_crtc, nv_crtc->cursor_saved_x,
+			nv_crtc->cursor_saved_y);
+	}
+
 	/* Force CLUT to get re-loaded during modeset */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5b134438eff..c6971910648 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -851,12 +851,17 @@ extern int  nouveau_dma_init(struct nouveau_channel *);
 extern int  nouveau_dma_wait(struct nouveau_channel *, int slots, int size);
 
 /* nouveau_acpi.c */
+#define ROM_BIOS_PAGE 4096
 #if defined(CONFIG_ACPI)
 void nouveau_register_dsm_handler(void);
 void nouveau_unregister_dsm_handler(void);
+int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len);
+bool nouveau_acpi_rom_supported(struct pci_dev *pdev);
 #else
 static inline void nouveau_register_dsm_handler(void) {}
 static inline void nouveau_unregister_dsm_handler(void) {}
+static inline bool nouveau_acpi_rom_supported(struct pci_dev *pdev) { return false; }
+static inline int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len) { return -EINVAL; }
 #endif
 
 /* nouveau_backlight.c */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index fd4a2df715e..257ea130ae1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -377,6 +377,7 @@ int nouveau_fbcon_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_fbdev *nfbdev;
+	int ret;
 
 	nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
 	if (!nfbdev)
@@ -386,7 +387,13 @@ int nouveau_fbcon_init(struct drm_device *dev)
 	dev_priv->nfbdev = nfbdev;
 	nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
 
-	drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+	ret = drm_fb_helper_init(dev, &nfbdev->helper,
+				 nv_two_heads(dev) ? 2 : 1, 4);
+	if (ret) {
+		kfree(nfbdev);
+		return ret;
+	}
+
 	drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
 	drm_fb_helper_initial_config(&nfbdev->helper, 32);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 775a7017af6..c1fd42b0dad 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -540,7 +540,8 @@ nouveau_mem_detect(struct drm_device *dev)
 		dev_priv->vram_size  = nv_rd32(dev, NV04_FIFO_DATA);
 		dev_priv->vram_size &= NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK;
 		if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
-			dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
+			dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10);
+			dev_priv->vram_sys_base <<= 12;
 	}
 
 	NV_INFO(dev, "Detected %dMiB VRAM\n", (int)(dev_priv->vram_size >> 20));
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index e632339c323..b02a231d693 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -376,12 +376,15 @@ out_err:
 static void nouveau_switcheroo_set_state(struct pci_dev *pdev,
 					 enum vga_switcheroo_state state)
 {
+	struct drm_device *dev = pci_get_drvdata(pdev);
 	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
 	if (state == VGA_SWITCHEROO_ON) {
 		printk(KERN_ERR "VGA switcheroo: switched nouveau on\n");
 		nouveau_pci_resume(pdev);
+		drm_kms_helper_poll_enable(dev);
 	} else {
 		printk(KERN_ERR "VGA switcheroo: switched nouveau off\n");
+		drm_kms_helper_poll_disable(dev);
 		nouveau_pci_suspend(pdev, pmm);
 	}
 }
@@ -776,29 +779,24 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 			return ret;
 	}
 
-	/* map larger RAMIN aperture on NV40 cards */
-	dev_priv->ramin  = NULL;
+	/* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
 	if (dev_priv->card_type >= NV_40) {
 		int ramin_bar = 2;
 		if (pci_resource_len(dev->pdev, ramin_bar) == 0)
 			ramin_bar = 3;
 
 		dev_priv->ramin_size = pci_resource_len(dev->pdev, ramin_bar);
-		dev_priv->ramin = ioremap(
-				pci_resource_start(dev->pdev, ramin_bar),
+		dev_priv->ramin =
+			ioremap(pci_resource_start(dev->pdev, ramin_bar),
 				dev_priv->ramin_size);
 		if (!dev_priv->ramin) {
-			NV_ERROR(dev, "Failed to init RAMIN mapping, "
-				      "limited instance memory available\n");
+			NV_ERROR(dev, "Failed to PRAMIN BAR");
+			return -ENOMEM;
 		}
-	}
-
-	/* On older cards (or if the above failed), create a map covering
-	 * the BAR0 PRAMIN aperture */
-	if (!dev_priv->ramin) {
+	} else {
 		dev_priv->ramin_size = 1 * 1024 * 1024;
 		dev_priv->ramin = ioremap(mmio_start_offs + NV_RAMIN,
-							dev_priv->ramin_size);
+					  dev_priv->ramin_size);
 		if (!dev_priv->ramin) {
 			NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
 			return -ENOMEM;
@@ -913,6 +911,9 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 	case NOUVEAU_GETPARAM_VM_VRAM_BASE:
 		getparam->value = dev_priv->vm_vram_base;
 		break;
+	case NOUVEAU_GETPARAM_PTIMER_TIME:
+		getparam->value = dev_priv->engine.timer.read(dev);
+		break;
 	case NOUVEAU_GETPARAM_GRAPH_UNITS:
 		/* NV40 and NV50 versions are quite different, but register
 		 * address is the same. User is supposed to know the card
diff --git a/drivers/gpu/drm/nouveau/nv04_cursor.c b/drivers/gpu/drm/nouveau/nv04_cursor.c
index 89a91b9d8b2..aaf3de3bc81 100644
--- a/drivers/gpu/drm/nouveau/nv04_cursor.c
+++ b/drivers/gpu/drm/nouveau/nv04_cursor.c
@@ -20,6 +20,7 @@ nv04_cursor_hide(struct nouveau_crtc *nv_crtc, bool update)
 static void
 nv04_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y)
 {
+	nv_crtc->cursor_saved_x = x; nv_crtc->cursor_saved_y = y;
 	NVWriteRAMDAC(nv_crtc->base.dev, nv_crtc->index,
 		      NV_PRAMDAC_CU_START_POS,
 		      XLATE(y, 0, NV_PRAMDAC_CU_START_POS_Y) |
diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c
index 753e723adb3..03ad7ab14f0 100644
--- a/drivers/gpu/drm/nouveau/nv50_cursor.c
+++ b/drivers/gpu/drm/nouveau/nv50_cursor.c
@@ -107,6 +107,7 @@ nv50_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y)
 {
 	struct drm_device *dev = nv_crtc->base.dev;
 
+	nv_crtc->cursor_saved_x = x; nv_crtc->cursor_saved_y = y;
 	nv_wr32(dev, NV50_PDISPLAY_CURSOR_USER_POS(nv_crtc->index),
 		((y & 0xFFFF) << 16) | (x & 0xFFFF));
 	/* Needed to make the cursor move. */
diff --git a/drivers/gpu/drm/nouveau/nv50_fb.c b/drivers/gpu/drm/nouveau/nv50_fb.c
index a95e6941ba8..32611bd30e6 100644
--- a/drivers/gpu/drm/nouveau/nv50_fb.c
+++ b/drivers/gpu/drm/nouveau/nv50_fb.c
@@ -6,10 +6,16 @@
 int
 nv50_fb_init(struct drm_device *dev)
 {
-	/* This is needed to get meaningful information from 100c90
-	 * on traps. No idea what these values mean exactly. */
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
+	/* Not a clue what this is exactly.  Without pointing it at a
+	 * scratch page, VRAM->GART blits with M2MF (as in DDX DFS)
+	 * cause IOMMU "read from address 0" errors (rh#561267)
+	 */
+	nv_wr32(dev, 0x100c08, dev_priv->gart_info.sg_dummy_bus >> 8);
+
+	/* This is needed to get meaningful information from 100c90
+	 * on traps. No idea what these values mean exactly. */
 	switch (dev_priv->chipset) {
 	case 0x50:
 		nv_wr32(dev, 0x100c90, 0x0707ff);
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index c61782b314e..bb47ad73726 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -31,7 +31,7 @@ nv50_gpio_location(struct dcb_gpio_entry *gpio, uint32_t *reg, uint32_t *shift)
 {
 	const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
 
-	if (gpio->line > 32)
+	if (gpio->line >= 32)
 		return -EINVAL;
 
 	*reg = nv50_gpio_reg[gpio->line >> 3];
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index b11eaf9c5c7..812778db76a 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -274,7 +274,6 @@ static const struct drm_encoder_funcs nv50_sor_encoder_funcs = {
 int
 nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_encoder *nv_encoder = NULL;
 	struct drm_encoder *encoder;
 	bool dum;
@@ -324,11 +323,7 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
 		int or = nv_encoder->or, link = !(entry->dpconf.sor.link & 1);
 		uint32_t tmp;
 
-		if (dev_priv->chipset < 0x90 ||
-		    dev_priv->chipset == 0x92 || dev_priv->chipset == 0xa0)
-			tmp = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_C(or));
-		else
-			tmp = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_C(or));
+		tmp = nv_rd32(dev, 0x61c700 + (or * 0x800));
 
 		switch ((tmp & 0x00000f00) >> 8) {
 		case 8:
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 3c91312dea9..84b1f2729d4 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -33,6 +33,9 @@ $(obj)/rs600_reg_safe.h: $(src)/reg_srcs/rs600 $(obj)/mkregtable
 $(obj)/r600_reg_safe.h: $(src)/reg_srcs/r600 $(obj)/mkregtable
 	$(call if_changed,mkregtable)
 
+$(obj)/evergreen_reg_safe.h: $(src)/reg_srcs/evergreen $(obj)/mkregtable
+	$(call if_changed,mkregtable)
+
 $(obj)/r100.o: $(obj)/r100_reg_safe.h $(obj)/rn50_reg_safe.h
 
 $(obj)/r200.o: $(obj)/r200_reg_safe.h
@@ -47,6 +50,8 @@ $(obj)/rs600.o: $(obj)/rs600_reg_safe.h
 
 $(obj)/r600_cs.o: $(obj)/r600_reg_safe.h
 
+$(obj)/evergreen_cs.o: $(obj)/evergreen_reg_safe.h
+
 radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
 	radeon_irq.o r300_cmdbuf.o r600_cp.o
 # add KMS driver
@@ -60,7 +65,7 @@ radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
 	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \
 	r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \
 	r600_blit_kms.o radeon_pm.o atombios_dp.o r600_audio.o r600_hdmi.o \
-	evergreen.o
+	evergreen.o evergreen_cs.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index f3f2827017e..8c2d6478a22 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -498,7 +498,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 		if ((rdev->family == CHIP_RS600) ||
 		    (rdev->family == CHIP_RS690) ||
 		    (rdev->family == CHIP_RS740))
-			pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+			pll->flags |= (/*RADEON_PLL_USE_FRAC_FB_DIV |*/
 				       RADEON_PLL_PREFER_CLOSEST_LOWER);
 
 		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 8c8e4d3cbaa..1caf625e472 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -41,7 +41,18 @@ void evergreen_fini(struct radeon_device *rdev);
 
 void evergreen_pm_misc(struct radeon_device *rdev)
 {
-
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 void evergreen_pm_prepare(struct radeon_device *rdev)
@@ -596,7 +607,7 @@ static void evergreen_mc_program(struct radeon_device *rdev)
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
@@ -1211,11 +1222,11 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 		ps_thread_count = 128;
 
 	sq_thread_resource_mgmt = NUM_PS_THREADS(ps_thread_count);
-	sq_thread_resource_mgmt |= NUM_VS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt |= NUM_GS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt |= NUM_ES_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt_2 = NUM_HS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt_2 |= NUM_LS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
+	sq_thread_resource_mgmt |= NUM_VS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt |= NUM_GS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt |= NUM_ES_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt_2 = NUM_HS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt_2 |= NUM_LS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
 
 	sq_stack_resource_mgmt_1 = NUM_PS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
 	sq_stack_resource_mgmt_1 |= NUM_VS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
@@ -1249,6 +1260,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 	WREG32(VGT_GS_VERTEX_REUSE, 16);
 	WREG32(PA_SC_LINE_STIPPLE_STATE, 0);
 
+	WREG32(VGT_VERTEX_REUSE_BLOCK_CNTL, 14);
+	WREG32(VGT_OUT_DEALLOC_CNTL, 16);
+
 	WREG32(CB_PERF_CTR0_SEL_0, 0);
 	WREG32(CB_PERF_CTR0_SEL_1, 0);
 	WREG32(CB_PERF_CTR1_SEL_0, 0);
@@ -1258,6 +1272,26 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 	WREG32(CB_PERF_CTR3_SEL_0, 0);
 	WREG32(CB_PERF_CTR3_SEL_1, 0);
 
+	/* clear render buffer base addresses */
+	WREG32(CB_COLOR0_BASE, 0);
+	WREG32(CB_COLOR1_BASE, 0);
+	WREG32(CB_COLOR2_BASE, 0);
+	WREG32(CB_COLOR3_BASE, 0);
+	WREG32(CB_COLOR4_BASE, 0);
+	WREG32(CB_COLOR5_BASE, 0);
+	WREG32(CB_COLOR6_BASE, 0);
+	WREG32(CB_COLOR7_BASE, 0);
+	WREG32(CB_COLOR8_BASE, 0);
+	WREG32(CB_COLOR9_BASE, 0);
+	WREG32(CB_COLOR10_BASE, 0);
+	WREG32(CB_COLOR11_BASE, 0);
+
+	/* set the shader const cache sizes to 0 */
+	for (i = SQ_ALU_CONST_BUFFER_SIZE_PS_0; i < 0x28200; i += 4)
+		WREG32(i, 0);
+	for (i = SQ_ALU_CONST_BUFFER_SIZE_HS_0; i < 0x29000; i += 4)
+		WREG32(i, 0);
+
 	hdp_host_path_cntl = RREG32(HDP_HOST_PATH_CNTL);
 	WREG32(HDP_HOST_PATH_CNTL, hdp_host_path_cntl);
 
@@ -2148,7 +2182,7 @@ int evergreen_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	rdev->accel_working = false;
+	rdev->accel_working = true;
 	r = evergreen_startup(rdev);
 	if (r) {
 		dev_err(rdev->dev, "disabling GPU acceleration\n");
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
new file mode 100644
index 00000000000..345a75a03c9
--- /dev/null
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -0,0 +1,1354 @@
+/*
+ * Copyright 2010 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon.h"
+#include "evergreend.h"
+#include "evergreen_reg_safe.h"
+
+static int evergreen_cs_packet_next_reloc(struct radeon_cs_parser *p,
+					  struct radeon_cs_reloc **cs_reloc);
+
+struct evergreen_cs_track {
+	u32			group_size;
+	u32			nbanks;
+	u32			npipes;
+	/* value we track */
+	u32			nsamples;
+	u32			cb_color_base_last[12];
+	struct radeon_bo	*cb_color_bo[12];
+	u32			cb_color_bo_offset[12];
+	struct radeon_bo	*cb_color_fmask_bo[8];
+	struct radeon_bo	*cb_color_cmask_bo[8];
+	u32			cb_color_info[12];
+	u32			cb_color_view[12];
+	u32			cb_color_pitch_idx[12];
+	u32			cb_color_slice_idx[12];
+	u32			cb_color_dim_idx[12];
+	u32			cb_color_dim[12];
+	u32			cb_color_pitch[12];
+	u32			cb_color_slice[12];
+	u32			cb_color_cmask_slice[8];
+	u32			cb_color_fmask_slice[8];
+	u32			cb_target_mask;
+	u32			cb_shader_mask;
+	u32			vgt_strmout_config;
+	u32			vgt_strmout_buffer_config;
+	u32			db_depth_control;
+	u32			db_depth_view;
+	u32			db_depth_size;
+	u32			db_depth_size_idx;
+	u32			db_z_info;
+	u32			db_z_idx;
+	u32			db_z_read_offset;
+	u32			db_z_write_offset;
+	struct radeon_bo	*db_z_read_bo;
+	struct radeon_bo	*db_z_write_bo;
+	u32			db_s_info;
+	u32			db_s_idx;
+	u32			db_s_read_offset;
+	u32			db_s_write_offset;
+	struct radeon_bo	*db_s_read_bo;
+	struct radeon_bo	*db_s_write_bo;
+};
+
+static void evergreen_cs_track_init(struct evergreen_cs_track *track)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		track->cb_color_fmask_bo[i] = NULL;
+		track->cb_color_cmask_bo[i] = NULL;
+		track->cb_color_cmask_slice[i] = 0;
+		track->cb_color_fmask_slice[i] = 0;
+	}
+
+	for (i = 0; i < 12; i++) {
+		track->cb_color_base_last[i] = 0;
+		track->cb_color_bo[i] = NULL;
+		track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+		track->cb_color_info[i] = 0;
+		track->cb_color_view[i] = 0;
+		track->cb_color_pitch_idx[i] = 0;
+		track->cb_color_slice_idx[i] = 0;
+		track->cb_color_dim[i] = 0;
+		track->cb_color_pitch[i] = 0;
+		track->cb_color_slice[i] = 0;
+		track->cb_color_dim[i] = 0;
+	}
+	track->cb_target_mask = 0xFFFFFFFF;
+	track->cb_shader_mask = 0xFFFFFFFF;
+
+	track->db_depth_view = 0xFFFFC000;
+	track->db_depth_size = 0xFFFFFFFF;
+	track->db_depth_size_idx = 0;
+	track->db_depth_control = 0xFFFFFFFF;
+	track->db_z_info = 0xFFFFFFFF;
+	track->db_z_idx = 0xFFFFFFFF;
+	track->db_z_read_offset = 0xFFFFFFFF;
+	track->db_z_write_offset = 0xFFFFFFFF;
+	track->db_z_read_bo = NULL;
+	track->db_z_write_bo = NULL;
+	track->db_s_info = 0xFFFFFFFF;
+	track->db_s_idx = 0xFFFFFFFF;
+	track->db_s_read_offset = 0xFFFFFFFF;
+	track->db_s_write_offset = 0xFFFFFFFF;
+	track->db_s_read_bo = NULL;
+	track->db_s_write_bo = NULL;
+}
+
+static inline int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
+{
+	/* XXX fill in */
+	return 0;
+}
+
+static int evergreen_cs_track_check(struct radeon_cs_parser *p)
+{
+	struct evergreen_cs_track *track = p->track;
+
+	/* we don't support stream out buffer yet */
+	if (track->vgt_strmout_config || track->vgt_strmout_buffer_config) {
+		dev_warn(p->dev, "this kernel doesn't support SMX output buffer\n");
+		return -EINVAL;
+	}
+
+	/* XXX fill in */
+	return 0;
+}
+
+/**
+ * evergreen_cs_packet_parse() - parse cp packet and point ib index to next packet
+ * @parser:	parser structure holding parsing context.
+ * @pkt:	where to store packet informations
+ *
+ * Assume that chunk_ib_index is properly set. Will return -EINVAL
+ * if packet is bigger than remaining ib size. or if packets is unknown.
+ **/
+int evergreen_cs_packet_parse(struct radeon_cs_parser *p,
+			      struct radeon_cs_packet *pkt,
+			      unsigned idx)
+{
+	struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
+	uint32_t header;
+
+	if (idx >= ib_chunk->length_dw) {
+		DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
+			  idx, ib_chunk->length_dw);
+		return -EINVAL;
+	}
+	header = radeon_get_ib_value(p, idx);
+	pkt->idx = idx;
+	pkt->type = CP_PACKET_GET_TYPE(header);
+	pkt->count = CP_PACKET_GET_COUNT(header);
+	pkt->one_reg_wr = 0;
+	switch (pkt->type) {
+	case PACKET_TYPE0:
+		pkt->reg = CP_PACKET0_GET_REG(header);
+		break;
+	case PACKET_TYPE3:
+		pkt->opcode = CP_PACKET3_GET_OPCODE(header);
+		break;
+	case PACKET_TYPE2:
+		pkt->count = -1;
+		break;
+	default:
+		DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx);
+		return -EINVAL;
+	}
+	if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) {
+		DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n",
+			  pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * evergreen_cs_packet_next_reloc() - parse next packet which should be reloc packet3
+ * @parser:		parser structure holding parsing context.
+ * @data:		pointer to relocation data
+ * @offset_start:	starting offset
+ * @offset_mask:	offset mask (to align start offset on)
+ * @reloc:		reloc informations
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static int evergreen_cs_packet_next_reloc(struct radeon_cs_parser *p,
+					  struct radeon_cs_reloc **cs_reloc)
+{
+	struct radeon_cs_chunk *relocs_chunk;
+	struct radeon_cs_packet p3reloc;
+	unsigned idx;
+	int r;
+
+	if (p->chunk_relocs_idx == -1) {
+		DRM_ERROR("No relocation chunk !\n");
+		return -EINVAL;
+	}
+	*cs_reloc = NULL;
+	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
+	r = evergreen_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r) {
+		return r;
+	}
+	p->idx += p3reloc.count + 2;
+	if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+		DRM_ERROR("No packet3 for relocation for packet at %d.\n",
+			  p3reloc.idx);
+		return -EINVAL;
+	}
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
+	if (idx >= relocs_chunk->length_dw) {
+		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
+			  idx, relocs_chunk->length_dw);
+		return -EINVAL;
+	}
+	/* FIXME: we assume reloc size is 4 dwords */
+	*cs_reloc = p->relocs_ptr[(idx / 4)];
+	return 0;
+}
+
+/**
+ * evergreen_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser:		parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int evergreen_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_packet p3reloc;
+	int r;
+
+	r = evergreen_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r) {
+		return 0;
+	}
+	if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+		return 0;
+	}
+	return 1;
+}
+
+/**
+ * evergreen_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int evergreen_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, wait_reg_mem;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg, wait_reg_mem_info;
+	volatile uint32_t *ib;
+
+	ib = p->ib->ptr;
+
+	/* parse the WAIT_REG_MEM */
+	r = evergreen_cs_packet_parse(p, &wait_reg_mem, p->idx);
+	if (r)
+		return r;
+
+	/* check its a WAIT_REG_MEM */
+	if (wait_reg_mem.type != PACKET_TYPE3 ||
+	    wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+		DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+	/* bit 4 is reg (0) or mem (1) */
+	if (wait_reg_mem_info & 0x10) {
+		DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+		r = -EINVAL;
+		return r;
+	}
+	/* waiting for value to be equal */
+	if ((wait_reg_mem_info & 0x7) != 0x3) {
+		DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+		r = -EINVAL;
+		return r;
+	}
+	if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != EVERGREEN_VLINE_STATUS) {
+		DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != EVERGREEN_VLINE_STAT) {
+		DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = evergreen_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += wait_reg_mem.count + 2;
+	p->idx += p3reloc.count + 2;
+
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+	reg = CP_PACKET0_GET_REG(header);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 4] = PACKET2(0);
+		ib[h_idx + 5] = PACKET2(0);
+		ib[h_idx + 6] = PACKET2(0);
+		ib[h_idx + 7] = PACKET2(0);
+		ib[h_idx + 8] = PACKET2(0);
+	} else {
+		switch (reg) {
+		case EVERGREEN_VLINE_START_END:
+			header &= ~R600_CP_PACKET0_REG_MASK;
+			header |= (EVERGREEN_VLINE_START_END + radeon_crtc->crtc_offset) >> 2;
+			ib[h_idx] = header;
+			ib[h_idx + 4] = (EVERGREEN_VLINE_STATUS + radeon_crtc->crtc_offset) >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+	}
+out:
+	return r;
+}
+
+static int evergreen_packet0_check(struct radeon_cs_parser *p,
+				   struct radeon_cs_packet *pkt,
+				   unsigned idx, unsigned reg)
+{
+	int r;
+
+	switch (reg) {
+	case EVERGREEN_VLINE_START_END:
+		r = evergreen_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			return r;
+		}
+		break;
+	default:
+		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
+		       reg, idx);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int evergreen_cs_parse_packet0(struct radeon_cs_parser *p,
+				      struct radeon_cs_packet *pkt)
+{
+	unsigned reg, i;
+	unsigned idx;
+	int r;
+
+	idx = pkt->idx + 1;
+	reg = pkt->reg;
+	for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
+		r = evergreen_packet0_check(p, pkt, idx, reg);
+		if (r) {
+			return r;
+		}
+	}
+	return 0;
+}
+
+/**
+ * evergreen_cs_check_reg() - check if register is authorized or not
+ * @parser: parser structure holding parsing context
+ * @reg: register we are testing
+ * @idx: index into the cs buffer
+ *
+ * This function will test against evergreen_reg_safe_bm and return 0
+ * if register is safe. If register is not flag as safe this function
+ * will test it against a list of register needind special handling.
+ */
+static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
+{
+	struct evergreen_cs_track *track = (struct evergreen_cs_track *)p->track;
+	struct radeon_cs_reloc *reloc;
+	u32 last_reg = ARRAY_SIZE(evergreen_reg_safe_bm);
+	u32 m, i, tmp, *ib;
+	int r;
+
+	i = (reg >> 7);
+	if (i > last_reg) {
+		dev_warn(p->dev, "forbidden register 0x%08x at %d\n", reg, idx);
+		return -EINVAL;
+	}
+	m = 1 << ((reg >> 2) & 31);
+	if (!(evergreen_reg_safe_bm[i] & m))
+		return 0;
+	ib = p->ib->ptr;
+	switch (reg) {
+	/* force following reg to 0 in an attemp to disable out buffer
+	 * which will need us to better understand how it works to perform
+	 * security check on it (Jerome)
+	 */
+	case SQ_ESGS_RING_SIZE:
+	case SQ_GSVS_RING_SIZE:
+	case SQ_ESTMP_RING_SIZE:
+	case SQ_GSTMP_RING_SIZE:
+	case SQ_HSTMP_RING_SIZE:
+	case SQ_LSTMP_RING_SIZE:
+	case SQ_PSTMP_RING_SIZE:
+	case SQ_VSTMP_RING_SIZE:
+	case SQ_ESGS_RING_ITEMSIZE:
+	case SQ_ESTMP_RING_ITEMSIZE:
+	case SQ_GSTMP_RING_ITEMSIZE:
+	case SQ_GSVS_RING_ITEMSIZE:
+	case SQ_GS_VERT_ITEMSIZE:
+	case SQ_GS_VERT_ITEMSIZE_1:
+	case SQ_GS_VERT_ITEMSIZE_2:
+	case SQ_GS_VERT_ITEMSIZE_3:
+	case SQ_GSVS_RING_OFFSET_1:
+	case SQ_GSVS_RING_OFFSET_2:
+	case SQ_GSVS_RING_OFFSET_3:
+	case SQ_HSTMP_RING_ITEMSIZE:
+	case SQ_LSTMP_RING_ITEMSIZE:
+	case SQ_PSTMP_RING_ITEMSIZE:
+	case SQ_VSTMP_RING_ITEMSIZE:
+	case VGT_TF_RING_SIZE:
+		/* get value to populate the IB don't remove */
+		tmp =radeon_get_ib_value(p, idx);
+		ib[idx] = 0;
+		break;
+	case DB_DEPTH_CONTROL:
+		track->db_depth_control = radeon_get_ib_value(p, idx);
+		break;
+	case DB_Z_INFO:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		track->db_z_info = radeon_get_ib_value(p, idx);
+		ib[idx] &= ~Z_ARRAY_MODE(0xf);
+		track->db_z_info &= ~Z_ARRAY_MODE(0xf);
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+			ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+		} else {
+			ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		}
+		break;
+	case DB_STENCIL_INFO:
+		track->db_s_info = radeon_get_ib_value(p, idx);
+		break;
+	case DB_DEPTH_VIEW:
+		track->db_depth_view = radeon_get_ib_value(p, idx);
+		break;
+	case DB_DEPTH_SIZE:
+		track->db_depth_size = radeon_get_ib_value(p, idx);
+		track->db_depth_size_idx = idx;
+		break;
+	case DB_Z_READ_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		track->db_z_read_offset = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->db_z_read_bo = reloc->robj;
+		break;
+	case DB_Z_WRITE_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		track->db_z_write_offset = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->db_z_write_bo = reloc->robj;
+		break;
+	case DB_STENCIL_READ_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		track->db_s_read_offset = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->db_s_read_bo = reloc->robj;
+		break;
+	case DB_STENCIL_WRITE_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		track->db_s_write_offset = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->db_s_write_bo = reloc->robj;
+		break;
+	case VGT_STRMOUT_CONFIG:
+		track->vgt_strmout_config = radeon_get_ib_value(p, idx);
+		break;
+	case VGT_STRMOUT_BUFFER_CONFIG:
+		track->vgt_strmout_buffer_config = radeon_get_ib_value(p, idx);
+		break;
+	case CB_TARGET_MASK:
+		track->cb_target_mask = radeon_get_ib_value(p, idx);
+		break;
+	case CB_SHADER_MASK:
+		track->cb_shader_mask = radeon_get_ib_value(p, idx);
+		break;
+	case PA_SC_AA_CONFIG:
+		tmp = radeon_get_ib_value(p, idx) & MSAA_NUM_SAMPLES_MASK;
+		track->nsamples = 1 << tmp;
+		break;
+	case CB_COLOR0_VIEW:
+	case CB_COLOR1_VIEW:
+	case CB_COLOR2_VIEW:
+	case CB_COLOR3_VIEW:
+	case CB_COLOR4_VIEW:
+	case CB_COLOR5_VIEW:
+	case CB_COLOR6_VIEW:
+	case CB_COLOR7_VIEW:
+		tmp = (reg - CB_COLOR0_VIEW) / 0x3c;
+		track->cb_color_view[tmp] = radeon_get_ib_value(p, idx);
+		break;
+	case CB_COLOR8_VIEW:
+	case CB_COLOR9_VIEW:
+	case CB_COLOR10_VIEW:
+	case CB_COLOR11_VIEW:
+		tmp = ((reg - CB_COLOR8_VIEW) / 0x1c) + 8;
+		track->cb_color_view[tmp] = radeon_get_ib_value(p, idx);
+		break;
+	case CB_COLOR0_INFO:
+	case CB_COLOR1_INFO:
+	case CB_COLOR2_INFO:
+	case CB_COLOR3_INFO:
+	case CB_COLOR4_INFO:
+	case CB_COLOR5_INFO:
+	case CB_COLOR6_INFO:
+	case CB_COLOR7_INFO:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		tmp = (reg - CB_COLOR0_INFO) / 0x3c;
+		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		}
+		break;
+	case CB_COLOR8_INFO:
+	case CB_COLOR9_INFO:
+	case CB_COLOR10_INFO:
+	case CB_COLOR11_INFO:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8;
+		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		}
+		break;
+	case CB_COLOR0_PITCH:
+	case CB_COLOR1_PITCH:
+	case CB_COLOR2_PITCH:
+	case CB_COLOR3_PITCH:
+	case CB_COLOR4_PITCH:
+	case CB_COLOR5_PITCH:
+	case CB_COLOR6_PITCH:
+	case CB_COLOR7_PITCH:
+		tmp = (reg - CB_COLOR0_PITCH) / 0x3c;
+		track->cb_color_pitch[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_pitch_idx[tmp] = idx;
+		break;
+	case CB_COLOR8_PITCH:
+	case CB_COLOR9_PITCH:
+	case CB_COLOR10_PITCH:
+	case CB_COLOR11_PITCH:
+		tmp = ((reg - CB_COLOR8_PITCH) / 0x1c) + 8;
+		track->cb_color_pitch[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_pitch_idx[tmp] = idx;
+		break;
+	case CB_COLOR0_SLICE:
+	case CB_COLOR1_SLICE:
+	case CB_COLOR2_SLICE:
+	case CB_COLOR3_SLICE:
+	case CB_COLOR4_SLICE:
+	case CB_COLOR5_SLICE:
+	case CB_COLOR6_SLICE:
+	case CB_COLOR7_SLICE:
+		tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
+		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
+		break;
+	case CB_COLOR8_SLICE:
+	case CB_COLOR9_SLICE:
+	case CB_COLOR10_SLICE:
+	case CB_COLOR11_SLICE:
+		tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
+		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
+		break;
+	case CB_COLOR0_ATTRIB:
+	case CB_COLOR1_ATTRIB:
+	case CB_COLOR2_ATTRIB:
+	case CB_COLOR3_ATTRIB:
+	case CB_COLOR4_ATTRIB:
+	case CB_COLOR5_ATTRIB:
+	case CB_COLOR6_ATTRIB:
+	case CB_COLOR7_ATTRIB:
+	case CB_COLOR8_ATTRIB:
+	case CB_COLOR9_ATTRIB:
+	case CB_COLOR10_ATTRIB:
+	case CB_COLOR11_ATTRIB:
+		break;
+	case CB_COLOR0_DIM:
+	case CB_COLOR1_DIM:
+	case CB_COLOR2_DIM:
+	case CB_COLOR3_DIM:
+	case CB_COLOR4_DIM:
+	case CB_COLOR5_DIM:
+	case CB_COLOR6_DIM:
+	case CB_COLOR7_DIM:
+		tmp = (reg - CB_COLOR0_DIM) / 0x3c;
+		track->cb_color_dim[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_dim_idx[tmp] = idx;
+		break;
+	case CB_COLOR8_DIM:
+	case CB_COLOR9_DIM:
+	case CB_COLOR10_DIM:
+	case CB_COLOR11_DIM:
+		tmp = ((reg - CB_COLOR8_DIM) / 0x1c) + 8;
+		track->cb_color_dim[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_dim_idx[tmp] = idx;
+		break;
+	case CB_COLOR0_FMASK:
+	case CB_COLOR1_FMASK:
+	case CB_COLOR2_FMASK:
+	case CB_COLOR3_FMASK:
+	case CB_COLOR4_FMASK:
+	case CB_COLOR5_FMASK:
+	case CB_COLOR6_FMASK:
+	case CB_COLOR7_FMASK:
+		tmp = (reg - CB_COLOR0_FMASK) / 0x3c;
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+			return -EINVAL;
+		}
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->cb_color_fmask_bo[tmp] = reloc->robj;
+		break;
+	case CB_COLOR0_CMASK:
+	case CB_COLOR1_CMASK:
+	case CB_COLOR2_CMASK:
+	case CB_COLOR3_CMASK:
+	case CB_COLOR4_CMASK:
+	case CB_COLOR5_CMASK:
+	case CB_COLOR6_CMASK:
+	case CB_COLOR7_CMASK:
+		tmp = (reg - CB_COLOR0_CMASK) / 0x3c;
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+			return -EINVAL;
+		}
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->cb_color_cmask_bo[tmp] = reloc->robj;
+		break;
+	case CB_COLOR0_FMASK_SLICE:
+	case CB_COLOR1_FMASK_SLICE:
+	case CB_COLOR2_FMASK_SLICE:
+	case CB_COLOR3_FMASK_SLICE:
+	case CB_COLOR4_FMASK_SLICE:
+	case CB_COLOR5_FMASK_SLICE:
+	case CB_COLOR6_FMASK_SLICE:
+	case CB_COLOR7_FMASK_SLICE:
+		tmp = (reg - CB_COLOR0_FMASK_SLICE) / 0x3c;
+		track->cb_color_fmask_slice[tmp] = radeon_get_ib_value(p, idx);
+		break;
+	case CB_COLOR0_CMASK_SLICE:
+	case CB_COLOR1_CMASK_SLICE:
+	case CB_COLOR2_CMASK_SLICE:
+	case CB_COLOR3_CMASK_SLICE:
+	case CB_COLOR4_CMASK_SLICE:
+	case CB_COLOR5_CMASK_SLICE:
+	case CB_COLOR6_CMASK_SLICE:
+	case CB_COLOR7_CMASK_SLICE:
+		tmp = (reg - CB_COLOR0_CMASK_SLICE) / 0x3c;
+		track->cb_color_cmask_slice[tmp] = radeon_get_ib_value(p, idx);
+		break;
+	case CB_COLOR0_BASE:
+	case CB_COLOR1_BASE:
+	case CB_COLOR2_BASE:
+	case CB_COLOR3_BASE:
+	case CB_COLOR4_BASE:
+	case CB_COLOR5_BASE:
+	case CB_COLOR6_BASE:
+	case CB_COLOR7_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		tmp = (reg - CB_COLOR0_BASE) / 0x3c;
+		track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->cb_color_base_last[tmp] = ib[idx];
+		track->cb_color_bo[tmp] = reloc->robj;
+		break;
+	case CB_COLOR8_BASE:
+	case CB_COLOR9_BASE:
+	case CB_COLOR10_BASE:
+	case CB_COLOR11_BASE:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		tmp = ((reg - CB_COLOR8_BASE) / 0x1c) + 8;
+		track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx);
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		track->cb_color_base_last[tmp] = ib[idx];
+		track->cb_color_bo[tmp] = reloc->robj;
+		break;
+	case CB_IMMED0_BASE:
+	case CB_IMMED1_BASE:
+	case CB_IMMED2_BASE:
+	case CB_IMMED3_BASE:
+	case CB_IMMED4_BASE:
+	case CB_IMMED5_BASE:
+	case CB_IMMED6_BASE:
+	case CB_IMMED7_BASE:
+	case CB_IMMED8_BASE:
+	case CB_IMMED9_BASE:
+	case CB_IMMED10_BASE:
+	case CB_IMMED11_BASE:
+	case DB_HTILE_DATA_BASE:
+	case SQ_PGM_START_FS:
+	case SQ_PGM_START_ES:
+	case SQ_PGM_START_VS:
+	case SQ_PGM_START_GS:
+	case SQ_PGM_START_PS:
+	case SQ_PGM_START_HS:
+	case SQ_PGM_START_LS:
+	case GDS_ADDR_BASE:
+	case SQ_CONST_MEM_BASE:
+	case SQ_ALU_CONST_CACHE_GS_0:
+	case SQ_ALU_CONST_CACHE_GS_1:
+	case SQ_ALU_CONST_CACHE_GS_2:
+	case SQ_ALU_CONST_CACHE_GS_3:
+	case SQ_ALU_CONST_CACHE_GS_4:
+	case SQ_ALU_CONST_CACHE_GS_5:
+	case SQ_ALU_CONST_CACHE_GS_6:
+	case SQ_ALU_CONST_CACHE_GS_7:
+	case SQ_ALU_CONST_CACHE_GS_8:
+	case SQ_ALU_CONST_CACHE_GS_9:
+	case SQ_ALU_CONST_CACHE_GS_10:
+	case SQ_ALU_CONST_CACHE_GS_11:
+	case SQ_ALU_CONST_CACHE_GS_12:
+	case SQ_ALU_CONST_CACHE_GS_13:
+	case SQ_ALU_CONST_CACHE_GS_14:
+	case SQ_ALU_CONST_CACHE_GS_15:
+	case SQ_ALU_CONST_CACHE_PS_0:
+	case SQ_ALU_CONST_CACHE_PS_1:
+	case SQ_ALU_CONST_CACHE_PS_2:
+	case SQ_ALU_CONST_CACHE_PS_3:
+	case SQ_ALU_CONST_CACHE_PS_4:
+	case SQ_ALU_CONST_CACHE_PS_5:
+	case SQ_ALU_CONST_CACHE_PS_6:
+	case SQ_ALU_CONST_CACHE_PS_7:
+	case SQ_ALU_CONST_CACHE_PS_8:
+	case SQ_ALU_CONST_CACHE_PS_9:
+	case SQ_ALU_CONST_CACHE_PS_10:
+	case SQ_ALU_CONST_CACHE_PS_11:
+	case SQ_ALU_CONST_CACHE_PS_12:
+	case SQ_ALU_CONST_CACHE_PS_13:
+	case SQ_ALU_CONST_CACHE_PS_14:
+	case SQ_ALU_CONST_CACHE_PS_15:
+	case SQ_ALU_CONST_CACHE_VS_0:
+	case SQ_ALU_CONST_CACHE_VS_1:
+	case SQ_ALU_CONST_CACHE_VS_2:
+	case SQ_ALU_CONST_CACHE_VS_3:
+	case SQ_ALU_CONST_CACHE_VS_4:
+	case SQ_ALU_CONST_CACHE_VS_5:
+	case SQ_ALU_CONST_CACHE_VS_6:
+	case SQ_ALU_CONST_CACHE_VS_7:
+	case SQ_ALU_CONST_CACHE_VS_8:
+	case SQ_ALU_CONST_CACHE_VS_9:
+	case SQ_ALU_CONST_CACHE_VS_10:
+	case SQ_ALU_CONST_CACHE_VS_11:
+	case SQ_ALU_CONST_CACHE_VS_12:
+	case SQ_ALU_CONST_CACHE_VS_13:
+	case SQ_ALU_CONST_CACHE_VS_14:
+	case SQ_ALU_CONST_CACHE_VS_15:
+	case SQ_ALU_CONST_CACHE_HS_0:
+	case SQ_ALU_CONST_CACHE_HS_1:
+	case SQ_ALU_CONST_CACHE_HS_2:
+	case SQ_ALU_CONST_CACHE_HS_3:
+	case SQ_ALU_CONST_CACHE_HS_4:
+	case SQ_ALU_CONST_CACHE_HS_5:
+	case SQ_ALU_CONST_CACHE_HS_6:
+	case SQ_ALU_CONST_CACHE_HS_7:
+	case SQ_ALU_CONST_CACHE_HS_8:
+	case SQ_ALU_CONST_CACHE_HS_9:
+	case SQ_ALU_CONST_CACHE_HS_10:
+	case SQ_ALU_CONST_CACHE_HS_11:
+	case SQ_ALU_CONST_CACHE_HS_12:
+	case SQ_ALU_CONST_CACHE_HS_13:
+	case SQ_ALU_CONST_CACHE_HS_14:
+	case SQ_ALU_CONST_CACHE_HS_15:
+	case SQ_ALU_CONST_CACHE_LS_0:
+	case SQ_ALU_CONST_CACHE_LS_1:
+	case SQ_ALU_CONST_CACHE_LS_2:
+	case SQ_ALU_CONST_CACHE_LS_3:
+	case SQ_ALU_CONST_CACHE_LS_4:
+	case SQ_ALU_CONST_CACHE_LS_5:
+	case SQ_ALU_CONST_CACHE_LS_6:
+	case SQ_ALU_CONST_CACHE_LS_7:
+	case SQ_ALU_CONST_CACHE_LS_8:
+	case SQ_ALU_CONST_CACHE_LS_9:
+	case SQ_ALU_CONST_CACHE_LS_10:
+	case SQ_ALU_CONST_CACHE_LS_11:
+	case SQ_ALU_CONST_CACHE_LS_12:
+	case SQ_ALU_CONST_CACHE_LS_13:
+	case SQ_ALU_CONST_CACHE_LS_14:
+	case SQ_ALU_CONST_CACHE_LS_15:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		break;
+	default:
+		dev_warn(p->dev, "forbidden register 0x%08x at %d\n", reg, idx);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * evergreen_check_texture_resource() - check if register is authorized or not
+ * @p: parser structure holding parsing context
+ * @idx: index into the cs buffer
+ * @texture: texture's bo structure
+ * @mipmap: mipmap's bo structure
+ *
+ * This function will check that the resource has valid field and that
+ * the texture and mipmap bo object are big enough to cover this resource.
+ */
+static inline int evergreen_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
+						   struct radeon_bo *texture,
+						   struct radeon_bo *mipmap)
+{
+	/* XXX fill in */
+	return 0;
+}
+
+static int evergreen_packet3_check(struct radeon_cs_parser *p,
+				   struct radeon_cs_packet *pkt)
+{
+	struct radeon_cs_reloc *reloc;
+	struct evergreen_cs_track *track;
+	volatile u32 *ib;
+	unsigned idx;
+	unsigned i;
+	unsigned start_reg, end_reg, reg;
+	int r;
+	u32 idx_value;
+
+	track = (struct evergreen_cs_track *)p->track;
+	ib = p->ib->ptr;
+	idx = pkt->idx + 1;
+	idx_value = radeon_get_ib_value(p, idx);
+
+	switch (pkt->opcode) {
+	case PACKET3_CONTEXT_CONTROL:
+		if (pkt->count != 1) {
+			DRM_ERROR("bad CONTEXT_CONTROL\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_INDEX_TYPE:
+	case PACKET3_NUM_INSTANCES:
+	case PACKET3_CLEAR_STATE:
+		if (pkt->count) {
+			DRM_ERROR("bad INDEX_TYPE/NUM_INSTANCES/CLEAR_STATE\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_INDEX_BASE:
+		if (pkt->count != 1) {
+			DRM_ERROR("bad INDEX_BASE\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("bad INDEX_BASE\n");
+			return -EINVAL;
+		}
+		ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX:
+		if (pkt->count != 3) {
+			DRM_ERROR("bad DRAW_INDEX\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("bad DRAW_INDEX\n");
+			return -EINVAL;
+		}
+		ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_2:
+		if (pkt->count != 4) {
+			DRM_ERROR("bad DRAW_INDEX_2\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("bad DRAW_INDEX_2\n");
+			return -EINVAL;
+		}
+		ib[idx+1] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_AUTO:
+		if (pkt->count != 1) {
+			DRM_ERROR("bad DRAW_INDEX_AUTO\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream %d\n", __func__, __LINE__, idx);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_MULTI_AUTO:
+		if (pkt->count != 2) {
+			DRM_ERROR("bad DRAW_INDEX_MULTI_AUTO\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream %d\n", __func__, __LINE__, idx);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_IMMD:
+		if (pkt->count < 2) {
+			DRM_ERROR("bad DRAW_INDEX_IMMD\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_OFFSET:
+		if (pkt->count != 2) {
+			DRM_ERROR("bad DRAW_INDEX_OFFSET\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_DRAW_INDEX_OFFSET_2:
+		if (pkt->count != 3) {
+			DRM_ERROR("bad DRAW_INDEX_OFFSET_2\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_track_check(p);
+		if (r) {
+			dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+			return r;
+		}
+		break;
+	case PACKET3_WAIT_REG_MEM:
+		if (pkt->count != 5) {
+			DRM_ERROR("bad WAIT_REG_MEM\n");
+			return -EINVAL;
+		}
+		/* bit 4 is reg (0) or mem (1) */
+		if (idx_value & 0x10) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("bad WAIT_REG_MEM\n");
+				return -EINVAL;
+			}
+			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		}
+		break;
+	case PACKET3_SURFACE_SYNC:
+		if (pkt->count != 3) {
+			DRM_ERROR("bad SURFACE_SYNC\n");
+			return -EINVAL;
+		}
+		/* 0xffffffff/0x0 is flush all cache flag */
+		if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+		    radeon_get_ib_value(p, idx + 2) != 0) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("bad SURFACE_SYNC\n");
+				return -EINVAL;
+			}
+			ib[idx+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		}
+		break;
+	case PACKET3_EVENT_WRITE:
+		if (pkt->count != 2 && pkt->count != 0) {
+			DRM_ERROR("bad EVENT_WRITE\n");
+			return -EINVAL;
+		}
+		if (pkt->count) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("bad EVENT_WRITE\n");
+				return -EINVAL;
+			}
+			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		}
+		break;
+	case PACKET3_EVENT_WRITE_EOP:
+		if (pkt->count != 4) {
+			DRM_ERROR("bad EVENT_WRITE_EOP\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("bad EVENT_WRITE_EOP\n");
+			return -EINVAL;
+		}
+		ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		break;
+	case PACKET3_EVENT_WRITE_EOS:
+		if (pkt->count != 3) {
+			DRM_ERROR("bad EVENT_WRITE_EOS\n");
+			return -EINVAL;
+		}
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("bad EVENT_WRITE_EOS\n");
+			return -EINVAL;
+		}
+		ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		break;
+	case PACKET3_SET_CONFIG_REG:
+		start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_CONFIG_REG_START) ||
+		    (start_reg >= PACKET3_SET_CONFIG_REG_END) ||
+		    (end_reg >= PACKET3_SET_CONFIG_REG_END)) {
+			DRM_ERROR("bad PACKET3_SET_CONFIG_REG\n");
+			return -EINVAL;
+		}
+		for (i = 0; i < pkt->count; i++) {
+			reg = start_reg + (4 * i);
+			r = evergreen_cs_check_reg(p, reg, idx+1+i);
+			if (r)
+				return r;
+		}
+		break;
+	case PACKET3_SET_CONTEXT_REG:
+		start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_CONTEXT_REG_START) ||
+		    (start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
+		    (end_reg >= PACKET3_SET_CONTEXT_REG_END)) {
+			DRM_ERROR("bad PACKET3_SET_CONTEXT_REG\n");
+			return -EINVAL;
+		}
+		for (i = 0; i < pkt->count; i++) {
+			reg = start_reg + (4 * i);
+			r = evergreen_cs_check_reg(p, reg, idx+1+i);
+			if (r)
+				return r;
+		}
+		break;
+	case PACKET3_SET_RESOURCE:
+		if (pkt->count % 8) {
+			DRM_ERROR("bad SET_RESOURCE\n");
+			return -EINVAL;
+		}
+		start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_RESOURCE_START) ||
+		    (start_reg >= PACKET3_SET_RESOURCE_END) ||
+		    (end_reg >= PACKET3_SET_RESOURCE_END)) {
+			DRM_ERROR("bad SET_RESOURCE\n");
+			return -EINVAL;
+		}
+		for (i = 0; i < (pkt->count / 8); i++) {
+			struct radeon_bo *texture, *mipmap;
+			u32 size, offset;
+
+			switch (G__SQ_CONSTANT_TYPE(radeon_get_ib_value(p, idx+1+(i*8)+7))) {
+			case SQ_TEX_VTX_VALID_TEXTURE:
+				/* tex base */
+				r = evergreen_cs_packet_next_reloc(p, &reloc);
+				if (r) {
+					DRM_ERROR("bad SET_RESOURCE (tex)\n");
+					return -EINVAL;
+				}
+				ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				texture = reloc->robj;
+				/* tex mip base */
+				r = evergreen_cs_packet_next_reloc(p, &reloc);
+				if (r) {
+					DRM_ERROR("bad SET_RESOURCE (tex)\n");
+					return -EINVAL;
+				}
+				ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				mipmap = reloc->robj;
+				r = evergreen_check_texture_resource(p,  idx+1+(i*8),
+						texture, mipmap);
+				if (r)
+					return r;
+				break;
+			case SQ_TEX_VTX_VALID_BUFFER:
+				/* vtx base */
+				r = evergreen_cs_packet_next_reloc(p, &reloc);
+				if (r) {
+					DRM_ERROR("bad SET_RESOURCE (vtx)\n");
+					return -EINVAL;
+				}
+				offset = radeon_get_ib_value(p, idx+1+(i*8)+0);
+				size = radeon_get_ib_value(p, idx+1+(i*8)+1);
+				if (p->rdev && (size + offset) > radeon_bo_size(reloc->robj)) {
+					/* force size to size of the buffer */
+					dev_warn(p->dev, "vbo resource seems too big for the bo\n");
+					ib[idx+1+(i*8)+1] = radeon_bo_size(reloc->robj);
+				}
+				ib[idx+1+(i*8)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
+				ib[idx+1+(i*8)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+				break;
+			case SQ_TEX_VTX_INVALID_TEXTURE:
+			case SQ_TEX_VTX_INVALID_BUFFER:
+			default:
+				DRM_ERROR("bad SET_RESOURCE\n");
+				return -EINVAL;
+			}
+		}
+		break;
+	case PACKET3_SET_ALU_CONST:
+		/* XXX fix me ALU const buffers only */
+		break;
+	case PACKET3_SET_BOOL_CONST:
+		start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_BOOL_CONST_START) ||
+		    (start_reg >= PACKET3_SET_BOOL_CONST_END) ||
+		    (end_reg >= PACKET3_SET_BOOL_CONST_END)) {
+			DRM_ERROR("bad SET_BOOL_CONST\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_SET_LOOP_CONST:
+		start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_LOOP_CONST_START) ||
+		    (start_reg >= PACKET3_SET_LOOP_CONST_END) ||
+		    (end_reg >= PACKET3_SET_LOOP_CONST_END)) {
+			DRM_ERROR("bad SET_LOOP_CONST\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_SET_CTL_CONST:
+		start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_CTL_CONST_START) ||
+		    (start_reg >= PACKET3_SET_CTL_CONST_END) ||
+		    (end_reg >= PACKET3_SET_CTL_CONST_END)) {
+			DRM_ERROR("bad SET_CTL_CONST\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_SET_SAMPLER:
+		if (pkt->count % 3) {
+			DRM_ERROR("bad SET_SAMPLER\n");
+			return -EINVAL;
+		}
+		start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_START;
+		end_reg = 4 * pkt->count + start_reg - 4;
+		if ((start_reg < PACKET3_SET_SAMPLER_START) ||
+		    (start_reg >= PACKET3_SET_SAMPLER_END) ||
+		    (end_reg >= PACKET3_SET_SAMPLER_END)) {
+			DRM_ERROR("bad SET_SAMPLER\n");
+			return -EINVAL;
+		}
+		break;
+	case PACKET3_NOP:
+		break;
+	default:
+		DRM_ERROR("Packet3 opcode %x not supported\n", pkt->opcode);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int evergreen_cs_parse(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_packet pkt;
+	struct evergreen_cs_track *track;
+	int r;
+
+	if (p->track == NULL) {
+		/* initialize tracker, we are in kms */
+		track = kzalloc(sizeof(*track), GFP_KERNEL);
+		if (track == NULL)
+			return -ENOMEM;
+		evergreen_cs_track_init(track);
+		track->npipes = p->rdev->config.evergreen.tiling_npipes;
+		track->nbanks = p->rdev->config.evergreen.tiling_nbanks;
+		track->group_size = p->rdev->config.evergreen.tiling_group_size;
+		p->track = track;
+	}
+	do {
+		r = evergreen_cs_packet_parse(p, &pkt, p->idx);
+		if (r) {
+			kfree(p->track);
+			p->track = NULL;
+			return r;
+		}
+		p->idx += pkt.count + 2;
+		switch (pkt.type) {
+		case PACKET_TYPE0:
+			r = evergreen_cs_parse_packet0(p, &pkt);
+			break;
+		case PACKET_TYPE2:
+			break;
+		case PACKET_TYPE3:
+			r = evergreen_packet3_check(p, &pkt);
+			break;
+		default:
+			DRM_ERROR("Unknown packet type %d !\n", pkt.type);
+			kfree(p->track);
+			p->track = NULL;
+			return -EINVAL;
+		}
+		if (r) {
+			kfree(p->track);
+			p->track = NULL;
+			return r;
+		}
+	} while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
+#if 0
+	for (r = 0; r < p->ib->length_dw; r++) {
+		printk(KERN_INFO "%05d  0x%08X\n", r, p->ib->ptr[r]);
+		mdelay(1);
+	}
+#endif
+	kfree(p->track);
+	p->track = NULL;
+	return 0;
+}
+
diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h
index af86af836f1..e028c1cd9d9 100644
--- a/drivers/gpu/drm/radeon/evergreen_reg.h
+++ b/drivers/gpu/drm/radeon/evergreen_reg.h
@@ -151,6 +151,9 @@
 #define EVERGREEN_DATA_FORMAT                           0x6b00
 #       define EVERGREEN_INTERLEAVE_EN                  (1 << 0)
 #define EVERGREEN_DESKTOP_HEIGHT                        0x6b04
+#define EVERGREEN_VLINE_START_END                       0x6b08
+#define EVERGREEN_VLINE_STATUS                          0x6bb8
+#       define EVERGREEN_VLINE_STAT                     (1 << 12)
 
 #define EVERGREEN_VIEWPORT_START                        0x6d70
 #define EVERGREEN_VIEWPORT_SIZE                         0x6d74
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 93e9e17ad54..a1cd621780e 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -218,6 +218,8 @@
 #define		CLIP_VTX_REORDER_ENA				(1 << 0)
 #define		NUM_CLIP_SEQ(x)					((x) << 1)
 #define PA_SC_AA_CONFIG					0x28C04
+#define         MSAA_NUM_SAMPLES_SHIFT                  0
+#define         MSAA_NUM_SAMPLES_MASK                   0x3
 #define PA_SC_CLIPRECT_RULE				0x2820C
 #define	PA_SC_EDGERULE					0x28230
 #define	PA_SC_FIFO_SIZE					0x8BCC
@@ -553,4 +555,469 @@
 #       define DC_HPDx_RX_INT_TIMER(x)                    ((x) << 16)
 #       define DC_HPDx_EN                                 (1 << 28)
 
+/*
+ * PM4
+ */
+#define	PACKET_TYPE0	0
+#define	PACKET_TYPE1	1
+#define	PACKET_TYPE2	2
+#define	PACKET_TYPE3	3
+
+#define CP_PACKET_GET_TYPE(h) (((h) >> 30) & 3)
+#define CP_PACKET_GET_COUNT(h) (((h) >> 16) & 0x3FFF)
+#define CP_PACKET0_GET_REG(h) (((h) & 0xFFFF) << 2)
+#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
+#define PACKET0(reg, n)	((PACKET_TYPE0 << 30) |				\
+			 (((reg) >> 2) & 0xFFFF) |			\
+			 ((n) & 0x3FFF) << 16)
+#define CP_PACKET2			0x80000000
+#define		PACKET2_PAD_SHIFT		0
+#define		PACKET2_PAD_MASK		(0x3fffffff << 0)
+
+#define PACKET2(v)	(CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
+
+#define PACKET3(op, n)	((PACKET_TYPE3 << 30) |				\
+			 (((op) & 0xFF) << 8) |				\
+			 ((n) & 0x3FFF) << 16)
+
+/* Packet 3 types */
+#define	PACKET3_NOP					0x10
+#define	PACKET3_SET_BASE				0x11
+#define	PACKET3_CLEAR_STATE				0x12
+#define	PACKET3_INDIRECT_BUFFER_SIZE			0x13
+#define	PACKET3_DISPATCH_DIRECT				0x15
+#define	PACKET3_DISPATCH_INDIRECT			0x16
+#define	PACKET3_INDIRECT_BUFFER_END			0x17
+#define	PACKET3_SET_PREDICATION				0x20
+#define	PACKET3_REG_RMW					0x21
+#define	PACKET3_COND_EXEC				0x22
+#define	PACKET3_PRED_EXEC				0x23
+#define	PACKET3_DRAW_INDIRECT				0x24
+#define	PACKET3_DRAW_INDEX_INDIRECT			0x25
+#define	PACKET3_INDEX_BASE				0x26
+#define	PACKET3_DRAW_INDEX_2				0x27
+#define	PACKET3_CONTEXT_CONTROL				0x28
+#define	PACKET3_DRAW_INDEX_OFFSET			0x29
+#define	PACKET3_INDEX_TYPE				0x2A
+#define	PACKET3_DRAW_INDEX				0x2B
+#define	PACKET3_DRAW_INDEX_AUTO				0x2D
+#define	PACKET3_DRAW_INDEX_IMMD				0x2E
+#define	PACKET3_NUM_INSTANCES				0x2F
+#define	PACKET3_DRAW_INDEX_MULTI_AUTO			0x30
+#define	PACKET3_STRMOUT_BUFFER_UPDATE			0x34
+#define	PACKET3_DRAW_INDEX_OFFSET_2			0x35
+#define	PACKET3_DRAW_INDEX_MULTI_ELEMENT		0x36
+#define	PACKET3_MEM_SEMAPHORE				0x39
+#define	PACKET3_MPEG_INDEX				0x3A
+#define	PACKET3_WAIT_REG_MEM				0x3C
+#define	PACKET3_MEM_WRITE				0x3D
+#define	PACKET3_INDIRECT_BUFFER				0x32
+#define	PACKET3_SURFACE_SYNC				0x43
+#              define PACKET3_CB0_DEST_BASE_ENA    (1 << 6)
+#              define PACKET3_CB1_DEST_BASE_ENA    (1 << 7)
+#              define PACKET3_CB2_DEST_BASE_ENA    (1 << 8)
+#              define PACKET3_CB3_DEST_BASE_ENA    (1 << 9)
+#              define PACKET3_CB4_DEST_BASE_ENA    (1 << 10)
+#              define PACKET3_CB5_DEST_BASE_ENA    (1 << 11)
+#              define PACKET3_CB6_DEST_BASE_ENA    (1 << 12)
+#              define PACKET3_CB7_DEST_BASE_ENA    (1 << 13)
+#              define PACKET3_DB_DEST_BASE_ENA     (1 << 14)
+#              define PACKET3_CB8_DEST_BASE_ENA    (1 << 15)
+#              define PACKET3_CB9_DEST_BASE_ENA    (1 << 16)
+#              define PACKET3_CB10_DEST_BASE_ENA   (1 << 17)
+#              define PACKET3_CB11_DEST_BASE_ENA   (1 << 17)
+#              define PACKET3_FULL_CACHE_ENA       (1 << 20)
+#              define PACKET3_TC_ACTION_ENA        (1 << 23)
+#              define PACKET3_VC_ACTION_ENA        (1 << 24)
+#              define PACKET3_CB_ACTION_ENA        (1 << 25)
+#              define PACKET3_DB_ACTION_ENA        (1 << 26)
+#              define PACKET3_SH_ACTION_ENA        (1 << 27)
+#              define PACKET3_SMX_ACTION_ENA       (1 << 28)
+#define	PACKET3_ME_INITIALIZE				0x44
+#define		PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
+#define	PACKET3_COND_WRITE				0x45
+#define	PACKET3_EVENT_WRITE				0x46
+#define	PACKET3_EVENT_WRITE_EOP				0x47
+#define	PACKET3_EVENT_WRITE_EOS				0x48
+#define	PACKET3_PREAMBLE_CNTL				0x4A
+#define	PACKET3_RB_OFFSET				0x4B
+#define	PACKET3_ALU_PS_CONST_BUFFER_COPY		0x4C
+#define	PACKET3_ALU_VS_CONST_BUFFER_COPY		0x4D
+#define	PACKET3_ALU_PS_CONST_UPDATE		        0x4E
+#define	PACKET3_ALU_VS_CONST_UPDATE		        0x4F
+#define	PACKET3_ONE_REG_WRITE				0x57
+#define	PACKET3_SET_CONFIG_REG				0x68
+#define		PACKET3_SET_CONFIG_REG_START			0x00008000
+#define		PACKET3_SET_CONFIG_REG_END			0x0000ac00
+#define	PACKET3_SET_CONTEXT_REG				0x69
+#define		PACKET3_SET_CONTEXT_REG_START			0x00028000
+#define		PACKET3_SET_CONTEXT_REG_END			0x00029000
+#define	PACKET3_SET_ALU_CONST				0x6A
+/* alu const buffers only; no reg file */
+#define	PACKET3_SET_BOOL_CONST				0x6B
+#define		PACKET3_SET_BOOL_CONST_START			0x0003a500
+#define		PACKET3_SET_BOOL_CONST_END			0x0003a518
+#define	PACKET3_SET_LOOP_CONST				0x6C
+#define		PACKET3_SET_LOOP_CONST_START			0x0003a200
+#define		PACKET3_SET_LOOP_CONST_END			0x0003a500
+#define	PACKET3_SET_RESOURCE				0x6D
+#define		PACKET3_SET_RESOURCE_START			0x00030000
+#define		PACKET3_SET_RESOURCE_END			0x00038000
+#define	PACKET3_SET_SAMPLER				0x6E
+#define		PACKET3_SET_SAMPLER_START			0x0003c000
+#define		PACKET3_SET_SAMPLER_END				0x0003c600
+#define	PACKET3_SET_CTL_CONST				0x6F
+#define		PACKET3_SET_CTL_CONST_START			0x0003cff0
+#define		PACKET3_SET_CTL_CONST_END			0x0003ff0c
+#define	PACKET3_SET_RESOURCE_OFFSET			0x70
+#define	PACKET3_SET_ALU_CONST_VS			0x71
+#define	PACKET3_SET_ALU_CONST_DI			0x72
+#define	PACKET3_SET_CONTEXT_REG_INDIRECT		0x73
+#define	PACKET3_SET_RESOURCE_INDIRECT			0x74
+#define	PACKET3_SET_APPEND_CNT			        0x75
+
+#define	SQ_RESOURCE_CONSTANT_WORD7_0				0x3001c
+#define		S__SQ_CONSTANT_TYPE(x)			(((x) & 3) << 30)
+#define		G__SQ_CONSTANT_TYPE(x)			(((x) >> 30) & 3)
+#define			SQ_TEX_VTX_INVALID_TEXTURE			0x0
+#define			SQ_TEX_VTX_INVALID_BUFFER			0x1
+#define			SQ_TEX_VTX_VALID_TEXTURE			0x2
+#define			SQ_TEX_VTX_VALID_BUFFER				0x3
+
+#define SQ_CONST_MEM_BASE				0x8df8
+
+#define SQ_ESGS_RING_SIZE				0x8c44
+#define SQ_GSVS_RING_SIZE				0x8c4c
+#define SQ_ESTMP_RING_SIZE				0x8c54
+#define SQ_GSTMP_RING_SIZE				0x8c5c
+#define SQ_VSTMP_RING_SIZE				0x8c64
+#define SQ_PSTMP_RING_SIZE				0x8c6c
+#define SQ_LSTMP_RING_SIZE				0x8e14
+#define SQ_HSTMP_RING_SIZE				0x8e1c
+#define VGT_TF_RING_SIZE				0x8988
+
+#define SQ_ESGS_RING_ITEMSIZE				0x28900
+#define SQ_GSVS_RING_ITEMSIZE				0x28904
+#define SQ_ESTMP_RING_ITEMSIZE				0x28908
+#define SQ_GSTMP_RING_ITEMSIZE				0x2890c
+#define SQ_VSTMP_RING_ITEMSIZE				0x28910
+#define SQ_PSTMP_RING_ITEMSIZE				0x28914
+#define SQ_LSTMP_RING_ITEMSIZE				0x28830
+#define SQ_HSTMP_RING_ITEMSIZE				0x28834
+
+#define SQ_GS_VERT_ITEMSIZE				0x2891c
+#define SQ_GS_VERT_ITEMSIZE_1				0x28920
+#define SQ_GS_VERT_ITEMSIZE_2				0x28924
+#define SQ_GS_VERT_ITEMSIZE_3				0x28928
+#define SQ_GSVS_RING_OFFSET_1				0x2892c
+#define SQ_GSVS_RING_OFFSET_2				0x28930
+#define SQ_GSVS_RING_OFFSET_3				0x28934
+
+#define SQ_ALU_CONST_BUFFER_SIZE_PS_0			0x28140
+#define SQ_ALU_CONST_BUFFER_SIZE_HS_0			0x28f80
+
+#define SQ_ALU_CONST_CACHE_PS_0				0x28940
+#define SQ_ALU_CONST_CACHE_PS_1				0x28944
+#define SQ_ALU_CONST_CACHE_PS_2				0x28948
+#define SQ_ALU_CONST_CACHE_PS_3				0x2894c
+#define SQ_ALU_CONST_CACHE_PS_4				0x28950
+#define SQ_ALU_CONST_CACHE_PS_5				0x28954
+#define SQ_ALU_CONST_CACHE_PS_6				0x28958
+#define SQ_ALU_CONST_CACHE_PS_7				0x2895c
+#define SQ_ALU_CONST_CACHE_PS_8				0x28960
+#define SQ_ALU_CONST_CACHE_PS_9				0x28964
+#define SQ_ALU_CONST_CACHE_PS_10			0x28968
+#define SQ_ALU_CONST_CACHE_PS_11			0x2896c
+#define SQ_ALU_CONST_CACHE_PS_12			0x28970
+#define SQ_ALU_CONST_CACHE_PS_13			0x28974
+#define SQ_ALU_CONST_CACHE_PS_14			0x28978
+#define SQ_ALU_CONST_CACHE_PS_15			0x2897c
+#define SQ_ALU_CONST_CACHE_VS_0				0x28980
+#define SQ_ALU_CONST_CACHE_VS_1				0x28984
+#define SQ_ALU_CONST_CACHE_VS_2				0x28988
+#define SQ_ALU_CONST_CACHE_VS_3				0x2898c
+#define SQ_ALU_CONST_CACHE_VS_4				0x28990
+#define SQ_ALU_CONST_CACHE_VS_5				0x28994
+#define SQ_ALU_CONST_CACHE_VS_6				0x28998
+#define SQ_ALU_CONST_CACHE_VS_7				0x2899c
+#define SQ_ALU_CONST_CACHE_VS_8				0x289a0
+#define SQ_ALU_CONST_CACHE_VS_9				0x289a4
+#define SQ_ALU_CONST_CACHE_VS_10			0x289a8
+#define SQ_ALU_CONST_CACHE_VS_11			0x289ac
+#define SQ_ALU_CONST_CACHE_VS_12			0x289b0
+#define SQ_ALU_CONST_CACHE_VS_13			0x289b4
+#define SQ_ALU_CONST_CACHE_VS_14			0x289b8
+#define SQ_ALU_CONST_CACHE_VS_15			0x289bc
+#define SQ_ALU_CONST_CACHE_GS_0				0x289c0
+#define SQ_ALU_CONST_CACHE_GS_1				0x289c4
+#define SQ_ALU_CONST_CACHE_GS_2				0x289c8
+#define SQ_ALU_CONST_CACHE_GS_3				0x289cc
+#define SQ_ALU_CONST_CACHE_GS_4				0x289d0
+#define SQ_ALU_CONST_CACHE_GS_5				0x289d4
+#define SQ_ALU_CONST_CACHE_GS_6				0x289d8
+#define SQ_ALU_CONST_CACHE_GS_7				0x289dc
+#define SQ_ALU_CONST_CACHE_GS_8				0x289e0
+#define SQ_ALU_CONST_CACHE_GS_9				0x289e4
+#define SQ_ALU_CONST_CACHE_GS_10			0x289e8
+#define SQ_ALU_CONST_CACHE_GS_11			0x289ec
+#define SQ_ALU_CONST_CACHE_GS_12			0x289f0
+#define SQ_ALU_CONST_CACHE_GS_13			0x289f4
+#define SQ_ALU_CONST_CACHE_GS_14			0x289f8
+#define SQ_ALU_CONST_CACHE_GS_15			0x289fc
+#define SQ_ALU_CONST_CACHE_HS_0				0x28f00
+#define SQ_ALU_CONST_CACHE_HS_1				0x28f04
+#define SQ_ALU_CONST_CACHE_HS_2				0x28f08
+#define SQ_ALU_CONST_CACHE_HS_3				0x28f0c
+#define SQ_ALU_CONST_CACHE_HS_4				0x28f10
+#define SQ_ALU_CONST_CACHE_HS_5				0x28f14
+#define SQ_ALU_CONST_CACHE_HS_6				0x28f18
+#define SQ_ALU_CONST_CACHE_HS_7				0x28f1c
+#define SQ_ALU_CONST_CACHE_HS_8				0x28f20
+#define SQ_ALU_CONST_CACHE_HS_9				0x28f24
+#define SQ_ALU_CONST_CACHE_HS_10			0x28f28
+#define SQ_ALU_CONST_CACHE_HS_11			0x28f2c
+#define SQ_ALU_CONST_CACHE_HS_12			0x28f30
+#define SQ_ALU_CONST_CACHE_HS_13			0x28f34
+#define SQ_ALU_CONST_CACHE_HS_14			0x28f38
+#define SQ_ALU_CONST_CACHE_HS_15			0x28f3c
+#define SQ_ALU_CONST_CACHE_LS_0				0x28f40
+#define SQ_ALU_CONST_CACHE_LS_1				0x28f44
+#define SQ_ALU_CONST_CACHE_LS_2				0x28f48
+#define SQ_ALU_CONST_CACHE_LS_3				0x28f4c
+#define SQ_ALU_CONST_CACHE_LS_4				0x28f50
+#define SQ_ALU_CONST_CACHE_LS_5				0x28f54
+#define SQ_ALU_CONST_CACHE_LS_6				0x28f58
+#define SQ_ALU_CONST_CACHE_LS_7				0x28f5c
+#define SQ_ALU_CONST_CACHE_LS_8				0x28f60
+#define SQ_ALU_CONST_CACHE_LS_9				0x28f64
+#define SQ_ALU_CONST_CACHE_LS_10			0x28f68
+#define SQ_ALU_CONST_CACHE_LS_11			0x28f6c
+#define SQ_ALU_CONST_CACHE_LS_12			0x28f70
+#define SQ_ALU_CONST_CACHE_LS_13			0x28f74
+#define SQ_ALU_CONST_CACHE_LS_14			0x28f78
+#define SQ_ALU_CONST_CACHE_LS_15			0x28f7c
+
+#define DB_DEPTH_CONTROL				0x28800
+#define DB_DEPTH_VIEW					0x28008
+#define DB_HTILE_DATA_BASE				0x28014
+#define DB_Z_INFO					0x28040
+#       define Z_ARRAY_MODE(x)                          ((x) << 4)
+#define DB_STENCIL_INFO					0x28044
+#define DB_Z_READ_BASE					0x28048
+#define DB_STENCIL_READ_BASE				0x2804c
+#define DB_Z_WRITE_BASE					0x28050
+#define DB_STENCIL_WRITE_BASE				0x28054
+#define DB_DEPTH_SIZE					0x28058
+
+#define SQ_PGM_START_PS					0x28840
+#define SQ_PGM_START_VS					0x2885c
+#define SQ_PGM_START_GS					0x28874
+#define SQ_PGM_START_ES					0x2888c
+#define SQ_PGM_START_FS					0x288a4
+#define SQ_PGM_START_HS					0x288b8
+#define SQ_PGM_START_LS					0x288d0
+
+#define VGT_STRMOUT_CONFIG				0x28b94
+#define VGT_STRMOUT_BUFFER_CONFIG			0x28b98
+
+#define CB_TARGET_MASK					0x28238
+#define CB_SHADER_MASK					0x2823c
+
+#define GDS_ADDR_BASE					0x28720
+
+#define	CB_IMMED0_BASE					0x28b9c
+#define	CB_IMMED1_BASE					0x28ba0
+#define	CB_IMMED2_BASE					0x28ba4
+#define	CB_IMMED3_BASE					0x28ba8
+#define	CB_IMMED4_BASE					0x28bac
+#define	CB_IMMED5_BASE					0x28bb0
+#define	CB_IMMED6_BASE					0x28bb4
+#define	CB_IMMED7_BASE					0x28bb8
+#define	CB_IMMED8_BASE					0x28bbc
+#define	CB_IMMED9_BASE					0x28bc0
+#define	CB_IMMED10_BASE					0x28bc4
+#define	CB_IMMED11_BASE					0x28bc8
+
+/* all 12 CB blocks have these regs */
+#define	CB_COLOR0_BASE					0x28c60
+#define	CB_COLOR0_PITCH					0x28c64
+#define	CB_COLOR0_SLICE					0x28c68
+#define	CB_COLOR0_VIEW					0x28c6c
+#define	CB_COLOR0_INFO					0x28c70
+#       define CB_ARRAY_MODE(x)                         ((x) << 8)
+#       define ARRAY_LINEAR_GENERAL                     0
+#       define ARRAY_LINEAR_ALIGNED                     1
+#       define ARRAY_1D_TILED_THIN1                     2
+#       define ARRAY_2D_TILED_THIN1                     4
+#define	CB_COLOR0_ATTRIB				0x28c74
+#define	CB_COLOR0_DIM					0x28c78
+/* only CB0-7 blocks have these regs */
+#define	CB_COLOR0_CMASK					0x28c7c
+#define	CB_COLOR0_CMASK_SLICE				0x28c80
+#define	CB_COLOR0_FMASK					0x28c84
+#define	CB_COLOR0_FMASK_SLICE				0x28c88
+#define	CB_COLOR0_CLEAR_WORD0				0x28c8c
+#define	CB_COLOR0_CLEAR_WORD1				0x28c90
+#define	CB_COLOR0_CLEAR_WORD2				0x28c94
+#define	CB_COLOR0_CLEAR_WORD3				0x28c98
+
+#define	CB_COLOR1_BASE					0x28c9c
+#define	CB_COLOR2_BASE					0x28cd8
+#define	CB_COLOR3_BASE					0x28d14
+#define	CB_COLOR4_BASE					0x28d50
+#define	CB_COLOR5_BASE					0x28d8c
+#define	CB_COLOR6_BASE					0x28dc8
+#define	CB_COLOR7_BASE					0x28e04
+#define	CB_COLOR8_BASE					0x28e40
+#define	CB_COLOR9_BASE					0x28e5c
+#define	CB_COLOR10_BASE					0x28e78
+#define	CB_COLOR11_BASE					0x28e94
+
+#define	CB_COLOR1_PITCH					0x28ca0
+#define	CB_COLOR2_PITCH					0x28cdc
+#define	CB_COLOR3_PITCH					0x28d18
+#define	CB_COLOR4_PITCH					0x28d54
+#define	CB_COLOR5_PITCH					0x28d90
+#define	CB_COLOR6_PITCH					0x28dcc
+#define	CB_COLOR7_PITCH					0x28e08
+#define	CB_COLOR8_PITCH					0x28e44
+#define	CB_COLOR9_PITCH					0x28e60
+#define	CB_COLOR10_PITCH				0x28e7c
+#define	CB_COLOR11_PITCH				0x28e98
+
+#define	CB_COLOR1_SLICE					0x28ca4
+#define	CB_COLOR2_SLICE					0x28ce0
+#define	CB_COLOR3_SLICE					0x28d1c
+#define	CB_COLOR4_SLICE					0x28d58
+#define	CB_COLOR5_SLICE					0x28d94
+#define	CB_COLOR6_SLICE					0x28dd0
+#define	CB_COLOR7_SLICE					0x28e0c
+#define	CB_COLOR8_SLICE					0x28e48
+#define	CB_COLOR9_SLICE					0x28e64
+#define	CB_COLOR10_SLICE				0x28e80
+#define	CB_COLOR11_SLICE				0x28e9c
+
+#define	CB_COLOR1_VIEW					0x28ca8
+#define	CB_COLOR2_VIEW					0x28ce4
+#define	CB_COLOR3_VIEW					0x28d20
+#define	CB_COLOR4_VIEW					0x28d5c
+#define	CB_COLOR5_VIEW					0x28d98
+#define	CB_COLOR6_VIEW					0x28dd4
+#define	CB_COLOR7_VIEW					0x28e10
+#define	CB_COLOR8_VIEW					0x28e4c
+#define	CB_COLOR9_VIEW					0x28e68
+#define	CB_COLOR10_VIEW					0x28e84
+#define	CB_COLOR11_VIEW					0x28ea0
+
+#define	CB_COLOR1_INFO					0x28cac
+#define	CB_COLOR2_INFO					0x28ce8
+#define	CB_COLOR3_INFO					0x28d24
+#define	CB_COLOR4_INFO					0x28d60
+#define	CB_COLOR5_INFO					0x28d9c
+#define	CB_COLOR6_INFO					0x28dd8
+#define	CB_COLOR7_INFO					0x28e14
+#define	CB_COLOR8_INFO					0x28e50
+#define	CB_COLOR9_INFO					0x28e6c
+#define	CB_COLOR10_INFO					0x28e88
+#define	CB_COLOR11_INFO					0x28ea4
+
+#define	CB_COLOR1_ATTRIB				0x28cb0
+#define	CB_COLOR2_ATTRIB				0x28cec
+#define	CB_COLOR3_ATTRIB				0x28d28
+#define	CB_COLOR4_ATTRIB				0x28d64
+#define	CB_COLOR5_ATTRIB				0x28da0
+#define	CB_COLOR6_ATTRIB				0x28ddc
+#define	CB_COLOR7_ATTRIB				0x28e18
+#define	CB_COLOR8_ATTRIB				0x28e54
+#define	CB_COLOR9_ATTRIB				0x28e70
+#define	CB_COLOR10_ATTRIB				0x28e8c
+#define	CB_COLOR11_ATTRIB				0x28ea8
+
+#define	CB_COLOR1_DIM					0x28cb4
+#define	CB_COLOR2_DIM					0x28cf0
+#define	CB_COLOR3_DIM					0x28d2c
+#define	CB_COLOR4_DIM					0x28d68
+#define	CB_COLOR5_DIM					0x28da4
+#define	CB_COLOR6_DIM					0x28de0
+#define	CB_COLOR7_DIM					0x28e1c
+#define	CB_COLOR8_DIM					0x28e58
+#define	CB_COLOR9_DIM					0x28e74
+#define	CB_COLOR10_DIM					0x28e90
+#define	CB_COLOR11_DIM					0x28eac
+
+#define	CB_COLOR1_CMASK					0x28cb8
+#define	CB_COLOR2_CMASK					0x28cf4
+#define	CB_COLOR3_CMASK					0x28d30
+#define	CB_COLOR4_CMASK					0x28d6c
+#define	CB_COLOR5_CMASK					0x28da8
+#define	CB_COLOR6_CMASK					0x28de4
+#define	CB_COLOR7_CMASK					0x28e20
+
+#define	CB_COLOR1_CMASK_SLICE				0x28cbc
+#define	CB_COLOR2_CMASK_SLICE				0x28cf8
+#define	CB_COLOR3_CMASK_SLICE				0x28d34
+#define	CB_COLOR4_CMASK_SLICE				0x28d70
+#define	CB_COLOR5_CMASK_SLICE				0x28dac
+#define	CB_COLOR6_CMASK_SLICE				0x28de8
+#define	CB_COLOR7_CMASK_SLICE				0x28e24
+
+#define	CB_COLOR1_FMASK					0x28cc0
+#define	CB_COLOR2_FMASK					0x28cfc
+#define	CB_COLOR3_FMASK					0x28d38
+#define	CB_COLOR4_FMASK					0x28d74
+#define	CB_COLOR5_FMASK					0x28db0
+#define	CB_COLOR6_FMASK					0x28dec
+#define	CB_COLOR7_FMASK					0x28e28
+
+#define	CB_COLOR1_FMASK_SLICE				0x28cc4
+#define	CB_COLOR2_FMASK_SLICE				0x28d00
+#define	CB_COLOR3_FMASK_SLICE				0x28d3c
+#define	CB_COLOR4_FMASK_SLICE				0x28d78
+#define	CB_COLOR5_FMASK_SLICE				0x28db4
+#define	CB_COLOR6_FMASK_SLICE				0x28df0
+#define	CB_COLOR7_FMASK_SLICE				0x28e2c
+
+#define	CB_COLOR1_CLEAR_WORD0				0x28cc8
+#define	CB_COLOR2_CLEAR_WORD0				0x28d04
+#define	CB_COLOR3_CLEAR_WORD0				0x28d40
+#define	CB_COLOR4_CLEAR_WORD0				0x28d7c
+#define	CB_COLOR5_CLEAR_WORD0				0x28db8
+#define	CB_COLOR6_CLEAR_WORD0				0x28df4
+#define	CB_COLOR7_CLEAR_WORD0				0x28e30
+
+#define	CB_COLOR1_CLEAR_WORD1				0x28ccc
+#define	CB_COLOR2_CLEAR_WORD1				0x28d08
+#define	CB_COLOR3_CLEAR_WORD1				0x28d44
+#define	CB_COLOR4_CLEAR_WORD1				0x28d80
+#define	CB_COLOR5_CLEAR_WORD1				0x28dbc
+#define	CB_COLOR6_CLEAR_WORD1				0x28df8
+#define	CB_COLOR7_CLEAR_WORD1				0x28e34
+
+#define	CB_COLOR1_CLEAR_WORD2				0x28cd0
+#define	CB_COLOR2_CLEAR_WORD2				0x28d0c
+#define	CB_COLOR3_CLEAR_WORD2				0x28d48
+#define	CB_COLOR4_CLEAR_WORD2				0x28d84
+#define	CB_COLOR5_CLEAR_WORD2				0x28dc0
+#define	CB_COLOR6_CLEAR_WORD2				0x28dfc
+#define	CB_COLOR7_CLEAR_WORD2				0x28e38
+
+#define	CB_COLOR1_CLEAR_WORD3				0x28cd4
+#define	CB_COLOR2_CLEAR_WORD3				0x28d10
+#define	CB_COLOR3_CLEAR_WORD3				0x28d4c
+#define	CB_COLOR4_CLEAR_WORD3				0x28d88
+#define	CB_COLOR5_CLEAR_WORD3				0x28dc4
+#define	CB_COLOR6_CLEAR_WORD3				0x28e00
+#define	CB_COLOR7_CLEAR_WORD3				0x28e3c
+
+#define SQ_TEX_RESOURCE_WORD0_0                         0x30000
+#define SQ_TEX_RESOURCE_WORD1_0                         0x30004
+#       define TEX_ARRAY_MODE(x)                        ((x) << 28)
+#define SQ_TEX_RESOURCE_WORD2_0                         0x30008
+#define SQ_TEX_RESOURCE_WORD3_0                         0x3000C
+#define SQ_TEX_RESOURCE_WORD4_0                         0x30010
+#define SQ_TEX_RESOURCE_WORD5_0                         0x30014
+#define SQ_TEX_RESOURCE_WORD6_0                         0x30018
+#define SQ_TEX_RESOURCE_WORD7_0                         0x3001c
+
+
 #endif
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index cc004b05d63..a89a15ab524 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -162,6 +162,11 @@ void r100_pm_init_profile(struct radeon_device *rdev)
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+	/* mid sh */
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 	/* high sh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -172,6 +177,11 @@ void r100_pm_init_profile(struct radeon_device *rdev)
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+	/* mid mh */
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 	/* high mh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -1220,7 +1230,6 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 	header = radeon_get_ib_value(p, h_idx);
 	crtc_id = radeon_get_ib_value(p, h_idx + 5);
 	reg = CP_PACKET0_GET_REG(header);
-	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
 		DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -1254,7 +1263,6 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 		ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
 	}
 out:
-	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
 	return r;
 }
 
@@ -1618,6 +1626,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 		case RADEON_TXFORMAT_RGB332:
 		case RADEON_TXFORMAT_Y8:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_AI88:
 		case RADEON_TXFORMAT_ARGB1555:
@@ -1629,12 +1638,14 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 		case RADEON_TXFORMAT_LDUDV655:
 		case RADEON_TXFORMAT_DUDV88:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_ARGB8888:
 		case RADEON_TXFORMAT_RGBA8888:
 		case RADEON_TXFORMAT_SHADOW32:
 		case RADEON_TXFORMAT_LDUDUV8888:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_DXT1:
 			track->textures[i].cpp = 1;
@@ -2341,6 +2352,7 @@ void r100_mc_init(struct radeon_device *rdev)
 	if (rdev->flags & RADEON_IS_IGP)
 		base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
@@ -2594,12 +2606,6 @@ int r100_set_surface_reg(struct radeon_device *rdev, int reg,
 	int surf_index = reg * 16;
 	int flags = 0;
 
-	/* r100/r200 divide by 16 */
-	if (rdev->family < CHIP_R300)
-		flags = pitch / 16;
-	else
-		flags = pitch / 8;
-
 	if (rdev->family <= CHIP_RS200) {
 		if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
 				 == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
@@ -2623,6 +2629,20 @@ int r100_set_surface_reg(struct radeon_device *rdev, int reg,
 	if (tiling_flags & RADEON_TILING_SWAP_32BIT)
 		flags |= RADEON_SURF_AP0_SWP_32BPP | RADEON_SURF_AP1_SWP_32BPP;
 
+	/* when we aren't tiling the pitch seems to needs to be furtherdivided down. - tested on power5 + rn50 server */
+	if (tiling_flags & (RADEON_TILING_SWAP_16BIT | RADEON_TILING_SWAP_32BIT)) {
+		if (!(tiling_flags & (RADEON_TILING_MACRO | RADEON_TILING_MICRO)))
+			if (ASIC_IS_RN50(rdev))
+				pitch /= 16;
+	}
+
+	/* r100/r200 divide by 16 */
+	if (rdev->family < CHIP_R300)
+		flags |= pitch / 16;
+	else
+		flags |= pitch / 8;
+
+
 	DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
 	WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
 	WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
@@ -3137,33 +3157,6 @@ static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t)
 	DRM_ERROR("compress format            %d\n", t->compress_format);
 }
 
-static int r100_cs_track_cube(struct radeon_device *rdev,
-			      struct r100_cs_track *track, unsigned idx)
-{
-	unsigned face, w, h;
-	struct radeon_bo *cube_robj;
-	unsigned long size;
-
-	for (face = 0; face < 5; face++) {
-		cube_robj = track->textures[idx].cube_info[face].robj;
-		w = track->textures[idx].cube_info[face].width;
-		h = track->textures[idx].cube_info[face].height;
-
-		size = w * h;
-		size *= track->textures[idx].cpp;
-
-		size += track->textures[idx].cube_info[face].offset;
-
-		if (size > radeon_bo_size(cube_robj)) {
-			DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
-				  size, radeon_bo_size(cube_robj));
-			r100_cs_track_texture_print(&track->textures[idx]);
-			return -1;
-		}
-	}
-	return 0;
-}
-
 static int r100_track_compress_size(int compress_format, int w, int h)
 {
 	int block_width, block_height, block_bytes;
@@ -3194,6 +3187,37 @@ static int r100_track_compress_size(int compress_format, int w, int h)
 	return sz;
 }
 
+static int r100_cs_track_cube(struct radeon_device *rdev,
+			      struct r100_cs_track *track, unsigned idx)
+{
+	unsigned face, w, h;
+	struct radeon_bo *cube_robj;
+	unsigned long size;
+	unsigned compress_format = track->textures[idx].compress_format;
+
+	for (face = 0; face < 5; face++) {
+		cube_robj = track->textures[idx].cube_info[face].robj;
+		w = track->textures[idx].cube_info[face].width;
+		h = track->textures[idx].cube_info[face].height;
+
+		if (compress_format) {
+			size = r100_track_compress_size(compress_format, w, h);
+		} else
+			size = w * h;
+		size *= track->textures[idx].cpp;
+
+		size += track->textures[idx].cube_info[face].offset;
+
+		if (size > radeon_bo_size(cube_robj)) {
+			DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
+				  size, radeon_bo_size(cube_robj));
+			r100_cs_track_texture_print(&track->textures[idx]);
+			return -1;
+		}
+	}
+	return 0;
+}
+
 static int r100_cs_track_texture_check(struct radeon_device *rdev,
 				       struct r100_cs_track *track)
 {
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 85617c31121..0266d72e0a4 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -415,6 +415,8 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		/* 2D, 3D, CUBE */
 		switch (tmp) {
 		case 0:
+		case 3:
+		case 4:
 		case 5:
 		case 6:
 		case 7:
@@ -450,6 +452,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		case R200_TXFORMAT_RGB332:
 		case R200_TXFORMAT_Y8:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_AI88:
 		case R200_TXFORMAT_ARGB1555:
@@ -461,6 +464,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		case R200_TXFORMAT_DVDU88:
 		case R200_TXFORMAT_AVYU4444:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_ARGB8888:
 		case R200_TXFORMAT_RGBA8888:
@@ -468,6 +472,7 @@ int r200_packet0_check(struct radeon_cs_parser *p,
 		case R200_TXFORMAT_BGR111110:
 		case R200_TXFORMAT_LDVDU8888:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_DXT1:
 			track->textures[i].cpp = 1;
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index b2f9efe2897..19a7ef7ee34 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -481,6 +481,7 @@ void r300_mc_init(struct radeon_device *rdev)
 	if (rdev->flags & RADEON_IS_IGP)
 		base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
@@ -881,6 +882,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		case R300_TX_FORMAT_Y4X4:
 		case R300_TX_FORMAT_Z3Y3X2:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_X16:
 		case R300_TX_FORMAT_Y8X8:
@@ -892,6 +894,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		case R300_TX_FORMAT_B8G8_B8G8:
 		case R300_TX_FORMAT_G8R8_G8B8:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_Y16X16:
 		case R300_TX_FORMAT_Z11Y11X10:
@@ -902,14 +905,17 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		case R300_TX_FORMAT_FL_I32:
 		case 0x1e:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_W16Z16Y16X16:
 		case R300_TX_FORMAT_FL_R16G16B16A16:
 		case R300_TX_FORMAT_FL_I32A32:
 			track->textures[i].cpp = 8;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_FL_R32G32B32A32:
 			track->textures[i].cpp = 16;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_DXT1:
 			track->textures[i].cpp = 1;
@@ -1171,6 +1177,8 @@ int r300_cs_parse(struct radeon_cs_parser *p)
 	int r;
 
 	track = kzalloc(sizeof(*track), GFP_KERNEL);
+	if (track == NULL)
+		return -ENOMEM;
 	r100_cs_track_clear(p->rdev, track);
 	p->track = track;
 	do {
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 4415a5ee587..e6c89142bb4 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -45,9 +45,14 @@ void r420_pm_init_profile(struct radeon_device *rdev)
 	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
 	/* low sh */
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 0;
-	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+	/* mid sh */
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 	/* high sh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -58,6 +63,11 @@ void r420_pm_init_profile(struct radeon_device *rdev)
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+	/* mid mh */
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 	/* high mh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 34330df2848..694af7cc23a 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -125,6 +125,7 @@ void r520_mc_init(struct radeon_device *rdev)
 	r520_vram_get_type(rdev);
 	r100_vram_init_sizes(rdev);
 	radeon_vram_location(rdev, &rdev->mc, 0);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 44e96a2ae25..e100f69faee 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -130,9 +130,14 @@ void r600_pm_get_dynpm_state(struct radeon_device *rdev)
 							break;
 						}
 					}
-				} else
-					rdev->pm.requested_power_state_index =
-						rdev->pm.current_power_state_index - 1;
+				} else {
+					if (rdev->pm.current_power_state_index == 0)
+						rdev->pm.requested_power_state_index =
+							rdev->pm.num_power_states - 1;
+					else
+						rdev->pm.requested_power_state_index =
+							rdev->pm.current_power_state_index - 1;
+				}
 			}
 			rdev->pm.requested_clock_mode_index = 0;
 			/* don't use the power state if crtcs are active and no display flag is set */
@@ -291,6 +296,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -301,6 +311,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 1;
@@ -317,6 +332,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 2;
@@ -327,6 +347,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -343,6 +368,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 3;
@@ -353,6 +383,11 @@ void rs780_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 3;
@@ -375,6 +410,11 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -385,6 +425,11 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -401,7 +446,12 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+			/* mid sh */
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			/* high sh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -411,7 +461,12 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+			/* low mh */
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 2;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			/* high mh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -430,14 +485,30 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
 			} else {
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+			}
+			/* mid sh */
+			if (rdev->flags & RADEON_IS_MOBILITY) {
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
+			} else {
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			}
 			/* high sh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
@@ -453,14 +524,30 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 2;
+				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
 			} else {
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+			}
+			/* mid mh */
+			if (rdev->flags & RADEON_IS_MOBILITY) {
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
+			} else {
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			}
 			/* high mh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
@@ -475,7 +562,18 @@ void r600_pm_init_profile(struct radeon_device *rdev)
 
 void r600_pm_misc(struct radeon_device *rdev)
 {
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
 
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 bool r600_gui_idle(struct radeon_device *rdev)
@@ -1004,7 +1102,7 @@ static void r600_mc_program(struct radeon_device *rdev)
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
@@ -1081,6 +1179,7 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 		if (rdev->flags & RADEON_IS_IGP)
 			base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
 		radeon_vram_location(rdev, &rdev->mc, base);
+		rdev->mc.gtt_base_align = 0;
 		radeon_gtt_location(rdev, mc);
 	}
 }
@@ -1126,8 +1225,10 @@ int r600_mc_init(struct radeon_device *rdev)
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 
-	if (rdev->flags & RADEON_IS_IGP)
+	if (rdev->flags & RADEON_IS_IGP) {
+		rs690_pm_info(rdev);
 		rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+	}
 	radeon_update_bandwidth_info(rdev);
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index f4fb88ece2b..ca5c29f7077 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -538,9 +538,12 @@ int
 r600_prepare_blit_copy(struct drm_device *dev, struct drm_file *file_priv)
 {
 	drm_radeon_private_t *dev_priv = dev->dev_private;
+	int ret;
 	DRM_DEBUG("\n");
 
-	r600_nomm_get_vb(dev);
+	ret = r600_nomm_get_vb(dev);
+	if (ret)
+		return ret;
 
 	dev_priv->blit_vb->file_priv = file_priv;
 
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index c39c1bc1301..144c32d3713 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -585,7 +585,7 @@ static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
 	header = radeon_get_ib_value(p, h_idx);
 	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
 	reg = CP_PACKET0_GET_REG(header);
-	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
 		DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -620,7 +620,6 @@ static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
 		ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
 	}
 out:
-	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 669feb689bf..2f94dc66c18 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -176,6 +176,8 @@ void radeon_pm_suspend(struct radeon_device *rdev);
 void radeon_pm_resume(struct radeon_device *rdev);
 void radeon_combios_get_power_modes(struct radeon_device *rdev);
 void radeon_atombios_get_power_modes(struct radeon_device *rdev);
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
+void rs690_pm_info(struct radeon_device *rdev);
 
 /*
  * Fences.
@@ -349,6 +351,7 @@ struct radeon_mc {
 	int			vram_mtrr;
 	bool			vram_is_ddr;
 	bool			igp_sideport_enabled;
+	u64                     gtt_base_align;
 };
 
 bool radeon_combios_sideport_present(struct radeon_device *rdev);
@@ -618,7 +621,8 @@ enum radeon_dynpm_state {
 	DYNPM_STATE_DISABLED,
 	DYNPM_STATE_MINIMUM,
 	DYNPM_STATE_PAUSED,
-	DYNPM_STATE_ACTIVE
+	DYNPM_STATE_ACTIVE,
+	DYNPM_STATE_SUSPENDED,
 };
 enum radeon_dynpm_action {
 	DYNPM_ACTION_NONE,
@@ -647,15 +651,18 @@ enum radeon_pm_profile_type {
 	PM_PROFILE_DEFAULT,
 	PM_PROFILE_AUTO,
 	PM_PROFILE_LOW,
+	PM_PROFILE_MID,
 	PM_PROFILE_HIGH,
 };
 
 #define PM_PROFILE_DEFAULT_IDX 0
 #define PM_PROFILE_LOW_SH_IDX  1
-#define PM_PROFILE_HIGH_SH_IDX 2
-#define PM_PROFILE_LOW_MH_IDX  3
-#define PM_PROFILE_HIGH_MH_IDX 4
-#define PM_PROFILE_MAX         5
+#define PM_PROFILE_MID_SH_IDX  2
+#define PM_PROFILE_HIGH_SH_IDX 3
+#define PM_PROFILE_LOW_MH_IDX  4
+#define PM_PROFILE_MID_MH_IDX  5
+#define PM_PROFILE_HIGH_MH_IDX 6
+#define PM_PROFILE_MAX         7
 
 struct radeon_pm_profile {
 	int dpms_off_ps_idx;
@@ -744,6 +751,7 @@ struct radeon_pm {
 	int                     default_power_state_index;
 	u32                     current_sclk;
 	u32                     current_mclk;
+	u32                     current_vddc;
 	struct radeon_i2c_chan *i2c_bus;
 	/* selected pm method */
 	enum radeon_pm_method     pm_method;
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index e57df08d4ae..646f96f97c7 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -724,8 +724,8 @@ static struct radeon_asic evergreen_asic = {
 	.irq_set = &evergreen_irq_set,
 	.irq_process = &evergreen_irq_process,
 	.get_vblank_counter = &evergreen_get_vblank_counter,
-	.fence_ring_emit = NULL,
-	.cs_parse = NULL,
+	.fence_ring_emit = &r600_fence_ring_emit,
+	.cs_parse = &evergreen_cs_parse,
 	.copy_blit = NULL,
 	.copy_dma = NULL,
 	.copy = NULL,
@@ -780,6 +780,13 @@ int radeon_asic_init(struct radeon_device *rdev)
 	case CHIP_R423:
 	case CHIP_RV410:
 		rdev->asic = &r420_asic;
+		/* handle macs */
+		if (rdev->bios == NULL) {
+			rdev->asic->get_engine_clock = &radeon_legacy_get_engine_clock;
+			rdev->asic->set_engine_clock = &radeon_legacy_set_engine_clock;
+			rdev->asic->get_memory_clock = &radeon_legacy_get_memory_clock;
+			rdev->asic->set_memory_clock = NULL;
+		}
 		break;
 	case CHIP_RS400:
 	case CHIP_RS480:
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 5c40a3dfaca..c0bbaa64157 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -314,6 +314,7 @@ void evergreen_hpd_set_polarity(struct radeon_device *rdev,
 u32 evergreen_get_vblank_counter(struct radeon_device *rdev, int crtc);
 int evergreen_irq_set(struct radeon_device *rdev);
 int evergreen_irq_process(struct radeon_device *rdev);
+extern int evergreen_cs_parse(struct radeon_cs_parser *p);
 extern void evergreen_pm_misc(struct radeon_device *rdev);
 extern void evergreen_pm_prepare(struct radeon_device *rdev);
 extern void evergreen_pm_finish(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 24ea683f7cf..10673ae59cf 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -280,6 +280,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 		}
 	}
 
+	/* ASUS HD 3600 board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x9598) &&
+	    (dev->pdev->subsystem_vendor == 0x1043) &&
+	    (dev->pdev->subsystem_device == 0x01e4)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+			*connector_type = DRM_MODE_CONNECTOR_DVII;
+		}
+	}
+
 	/* ASUS HD 3450 board lists the DVI port as HDMI */
 	if ((dev->pdev->device == 0x95C5) &&
 	    (dev->pdev->subsystem_vendor == 0x1043) &&
@@ -1029,8 +1038,15 @@ bool radeon_atombios_sideport_present(struct radeon_device *rdev)
 				      data_offset);
 		switch (crev) {
 		case 1:
-			if (igp_info->info.ucMemoryType & 0xf0)
-				return true;
+			/* AMD IGPS */
+			if ((rdev->family == CHIP_RS690) ||
+			    (rdev->family == CHIP_RS740)) {
+				if (igp_info->info.ulBootUpMemoryClock)
+					return true;
+			} else {
+				if (igp_info->info.ucMemoryType & 0xf0)
+					return true;
+			}
 			break;
 		case 2:
 			if (igp_info->info_2.ucMemoryType & 0x0f)
@@ -1538,7 +1554,8 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 					rdev->pm.power_state[state_index].pcie_lanes =
 						power_info->info.asPowerPlayInfo[i].ucNumPciELanes;
 					misc = le32_to_cpu(power_info->info.asPowerPlayInfo[i].ulMiscInfo);
-					if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+					if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+					    (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
 						rdev->pm.power_state[state_index].clock_info[0].voltage.type =
 							VOLTAGE_GPIO;
 						rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1605,7 +1622,8 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 						power_info->info_2.asPowerPlayInfo[i].ucNumPciELanes;
 					misc = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMiscInfo);
 					misc2 = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMiscInfo2);
-					if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+					if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+					    (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
 						rdev->pm.power_state[state_index].clock_info[0].voltage.type =
 							VOLTAGE_GPIO;
 						rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1679,7 +1697,8 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 						power_info->info_3.asPowerPlayInfo[i].ucNumPciELanes;
 					misc = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMiscInfo);
 					misc2 = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMiscInfo2);
-					if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+					if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+					    (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
 						rdev->pm.power_state[state_index].clock_info[0].voltage.type =
 							VOLTAGE_GPIO;
 						rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1755,9 +1774,22 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 				rdev->pm.power_state[state_index].misc2 = 0;
 			}
 		} else {
+			int fw_index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
+			uint8_t fw_frev, fw_crev;
+			uint16_t fw_data_offset, vddc = 0;
+			union firmware_info *firmware_info;
+			ATOM_PPLIB_THERMALCONTROLLER *controller = &power_info->info_4.sThermalController;
+
+			if (atom_parse_data_header(mode_info->atom_context, fw_index, NULL,
+						   &fw_frev, &fw_crev, &fw_data_offset)) {
+				firmware_info =
+					(union firmware_info *)(mode_info->atom_context->bios +
+								fw_data_offset);
+				vddc = firmware_info->info_14.usBootUpVDDCVoltage;
+			}
+
 			/* add the i2c bus for thermal/fan chip */
 			/* no support for internal controller yet */
-			ATOM_PPLIB_THERMALCONTROLLER *controller = &power_info->info_4.sThermalController;
 			if (controller->ucType > 0) {
 				if ((controller->ucType == ATOM_PP_THERMALCONTROLLER_RV6xx) ||
 				    (controller->ucType == ATOM_PP_THERMALCONTROLLER_RV770) ||
@@ -1817,10 +1849,7 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 						/* skip invalid modes */
 						if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
 							continue;
-						rdev->pm.power_state[state_index].clock_info[mode_index].voltage.type =
-							VOLTAGE_SW;
-						rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
-							clock_info->usVDDC;
+						/* voltage works differently on IGPs */
 						mode_index++;
 					} else if (ASIC_IS_DCE4(rdev)) {
 						struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO *clock_info =
@@ -1904,6 +1933,16 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 						rdev->pm.default_power_state_index = state_index;
 						rdev->pm.power_state[state_index].default_clock_mode =
 							&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
+						/* patch the table values with the default slck/mclk from firmware info */
+						for (j = 0; j < mode_index; j++) {
+							rdev->pm.power_state[state_index].clock_info[j].mclk =
+								rdev->clock.default_mclk;
+							rdev->pm.power_state[state_index].clock_info[j].sclk =
+								rdev->clock.default_sclk;
+							if (vddc)
+								rdev->pm.power_state[state_index].clock_info[j].voltage.voltage =
+									vddc;
+						}
 					}
 					state_index++;
 				}
@@ -1943,6 +1982,7 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 
 	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
 	rdev->pm.current_clock_mode_index = 0;
+	rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
 }
 
 void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
@@ -1998,6 +2038,42 @@ void radeon_atom_set_memory_clock(struct radeon_device *rdev,
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+union set_voltage {
+	struct _SET_VOLTAGE_PS_ALLOCATION alloc;
+	struct _SET_VOLTAGE_PARAMETERS v1;
+	struct _SET_VOLTAGE_PARAMETERS_V2 v2;
+};
+
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level)
+{
+	union set_voltage args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
+	u8 frev, crev, volt_index = level;
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (crev) {
+	case 1:
+		args.v1.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+		args.v1.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_ALL_SOURCE;
+		args.v1.ucVoltageIndex = volt_index;
+		break;
+	case 2:
+		args.v2.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+		args.v2.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE;
+		args.v2.usVoltageLevel = cpu_to_le16(level);
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		return;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+
+
 void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
 {
 	struct radeon_device *rdev = dev->dev_private;
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index fbba938f804..2c921373999 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -48,6 +48,10 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev)
 	resource_size_t vram_base;
 	resource_size_t size = 256 * 1024; /* ??? */
 
+	if (!(rdev->flags & RADEON_IS_IGP))
+		if (!radeon_card_posted(rdev))
+			return false;
+
 	rdev->bios = NULL;
 	vram_base = drm_get_resource_start(rdev->ddev, 0);
 	bios = ioremap(vram_base, size);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7b5e10d3e9c..2417d7b06fd 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1411,6 +1411,11 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
 		} else
 #endif /* CONFIG_PPC_PMAC */
+#ifdef CONFIG_PPC64
+		if (ASIC_IS_RN50(rdev))
+			rdev->mode_info.connector_table = CT_RN50_POWER;
+		else
+#endif
 			rdev->mode_info.connector_table = CT_GENERIC;
 	}
 
@@ -1853,6 +1858,33 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 					    CONNECTOR_OBJECT_ID_SVIDEO,
 					    &hpd);
 		break;
+	case CT_RN50_POWER:
+		DRM_INFO("Connector Table: %d (rn50-power)\n",
+			 rdev->mode_info.connector_table);
+		/* VGA - primary dac */
+		ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_VGA,
+					    &hpd);
+		ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_VGA,
+					    &hpd);
+		break;
 	default:
 		DRM_INFO("Connector table: %d (invalid)\n",
 			 rdev->mode_info.connector_table);
@@ -1906,15 +1938,6 @@ static bool radeon_apply_legacy_quirks(struct drm_device *dev,
 			return false;
 	}
 
-	/* Some RV100 cards with 2 VGA ports show up with DVI+VGA */
-	if (dev->pdev->device == 0x5159 &&
-	    dev->pdev->subsystem_vendor == 0x1002 &&
-	    dev->pdev->subsystem_device == 0x013a) {
-		if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
-			*legacy_connector = CONNECTOR_CRT_LEGACY;
-
-	}
-
 	/* X300 card with extra non-existent DVI port */
 	if (dev->pdev->device == 0x5B60 &&
 	    dev->pdev->subsystem_vendor == 0x17af &&
@@ -2026,6 +2049,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 					combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
 				break;
 			default:
+				ddc_i2c.valid = false;
 				break;
 			}
 
@@ -2339,6 +2363,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 			if (RBIOS8(tv_info + 6) == 'T') {
 				if (radeon_apply_legacy_tv_quirks(dev)) {
 					hpd.hpd = RADEON_HPD_NONE;
+					ddc_i2c.valid = false;
 					radeon_add_legacy_encoder(dev,
 								  radeon_get_encoder_id
 								  (dev,
@@ -2454,7 +2479,12 @@ default_mode:
 	rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
 	rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
 	rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[0];
-	rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+	if ((state_index > 0) &&
+	    (rdev->pm.power_state[0].clock_info[0].voltage.type == VOLTAGE_GPIO))
+		rdev->pm.power_state[state_index].clock_info[0].voltage =
+			rdev->pm.power_state[0].clock_info[0].voltage;
+	else
+		rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
 	rdev->pm.power_state[state_index].pcie_lanes = 16;
 	rdev->pm.power_state[state_index].flags = 0;
 	rdev->pm.default_power_state_index = state_index;
@@ -3012,6 +3042,22 @@ void radeon_combios_asic_init(struct drm_device *dev)
 		combios_write_ram_size(dev);
 	}
 
+	/* quirk for rs4xx HP nx6125 laptop to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS480 &&
+	    rdev->pdev->subsystem_vendor == 0x103c &&
+	    rdev->pdev->subsystem_device == 0x308b)
+		return;
+
+	/* quirk for rs4xx HP dv5000 laptop to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS480 &&
+	    rdev->pdev->subsystem_vendor == 0x103c &&
+	    rdev->pdev->subsystem_device == 0x30a4)
+		return;
+
 	/* DYN CLK 1 */
 	table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
 	if (table)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 0c7ccc6961a..adccbc2c202 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,30 +771,27 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect
 			} else
 				ret = connector_status_connected;
 
-			/* multiple connectors on the same encoder with the same ddc line
-			 * This tends to be HDMI and DVI on the same encoder with the
-			 * same ddc line.  If the edid says HDMI, consider the HDMI port
-			 * connected and the DVI port disconnected.  If the edid doesn't
-			 * say HDMI, vice versa.
+			/* This gets complicated.  We have boards with VGA + HDMI with a
+			 * shared DDC line and we have boards with DVI-D + HDMI with a shared
+			 * DDC line.  The latter is more complex because with DVI<->HDMI adapters
+			 * you don't really know what's connected to which port as both are digital.
 			 */
 			if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
 				struct drm_device *dev = connector->dev;
+				struct radeon_device *rdev = dev->dev_private;
 				struct drm_connector *list_connector;
 				struct radeon_connector *list_radeon_connector;
 				list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) {
 					if (connector == list_connector)
 						continue;
 					list_radeon_connector = to_radeon_connector(list_connector);
-					if (radeon_connector->devices == list_radeon_connector->devices) {
-						if (drm_detect_hdmi_monitor(radeon_connector->edid)) {
-							if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
-								kfree(radeon_connector->edid);
-								radeon_connector->edid = NULL;
-								ret = connector_status_disconnected;
-							}
-						} else {
-							if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
-							    (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+					if (list_radeon_connector->shared_ddc &&
+					    (list_radeon_connector->ddc_bus->rec.i2c_id ==
+					     radeon_connector->ddc_bus->rec.i2c_id)) {
+						/* cases where both connectors are digital */
+						if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+							/* hpd is our only option in this case */
+							if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
 								kfree(radeon_connector->edid);
 								radeon_connector->edid = NULL;
 								ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index b7023fff89e..4eb67c0e099 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -194,7 +194,7 @@ unpin:
 fail:
 	drm_gem_object_unreference_unlocked(obj);
 
-	return 0;
+	return ret;
 }
 
 int radeon_crtc_cursor_move(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index fdc3fdf78ac..dd279da9054 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -226,20 +226,20 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 {
 	u64 size_af, size_bf;
 
-	size_af = 0xFFFFFFFF - mc->vram_end;
-	size_bf = mc->vram_start;
+	size_af = ((0xFFFFFFFF - mc->vram_end) + mc->gtt_base_align) & ~mc->gtt_base_align;
+	size_bf = mc->vram_start & ~mc->gtt_base_align;
 	if (size_bf > size_af) {
 		if (mc->gtt_size > size_bf) {
 			dev_warn(rdev->dev, "limiting GTT\n");
 			mc->gtt_size = size_bf;
 		}
-		mc->gtt_start = mc->vram_start - mc->gtt_size;
+		mc->gtt_start = (mc->vram_start & ~mc->gtt_base_align) - mc->gtt_size;
 	} else {
 		if (mc->gtt_size > size_af) {
 			dev_warn(rdev->dev, "limiting GTT\n");
 			mc->gtt_size = size_af;
 		}
-		mc->gtt_start = mc->vram_end + 1;
+		mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
 	}
 	mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
 	dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
@@ -546,8 +546,10 @@ static void radeon_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
 		/* don't suspend or resume card normally */
 		rdev->powered_down = false;
 		radeon_resume_kms(dev);
+		drm_kms_helper_poll_enable(dev);
 	} else {
 		printk(KERN_INFO "radeon: switched off\n");
+		drm_kms_helper_poll_disable(dev);
 		radeon_suspend_kms(dev, pmm);
 		/* don't suspend or resume card normally */
 		rdev->powered_down = true;
@@ -711,6 +713,7 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 {
 	struct radeon_device *rdev;
 	struct drm_crtc *crtc;
+	struct drm_connector *connector;
 	int r;
 
 	if (dev == NULL || dev->dev_private == NULL) {
@@ -723,6 +726,12 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 
 	if (rdev->powered_down)
 		return 0;
+
+	/* turn off display hw */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+	}
+
 	/* unpin the front buffers */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb);
@@ -770,6 +779,7 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 
 int radeon_resume_kms(struct drm_device *dev)
 {
+	struct drm_connector *connector;
 	struct radeon_device *rdev = dev->dev_private;
 
 	if (rdev->powered_down)
@@ -788,6 +798,12 @@ int radeon_resume_kms(struct drm_device *dev)
 	radeon_resume(rdev);
 	radeon_pm_resume(rdev);
 	radeon_restore_bios_scratch_regs(rdev);
+
+	/* turn on display hw */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+	}
+
 	radeon_fbdev_set_suspend(rdev, 0);
 	release_console_sem();
 
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 1006549d157..8154cdf796e 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -284,8 +284,7 @@ static const char *connector_names[15] = {
 	"eDP",
 };
 
-static const char *hpd_names[7] = {
-	"NONE",
+static const char *hpd_names[6] = {
 	"HPD1",
 	"HPD2",
 	"HPD3",
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 902d1731a65..e166fe4d7c3 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -45,9 +45,10 @@
  * - 2.2.0 - add r6xx/r7xx const buffer support
  * - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
  * - 2.4.0 - add crtc id query
+ * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	4
+#define KMS_DRIVER_MINOR	5
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 1ebb100015b..e0b30b264c2 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1072,6 +1072,8 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 	if (is_dig) {
 		switch (mode) {
 		case DRM_MODE_DPMS_ON:
+			if (!ASIC_IS_DCE4(rdev))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
 				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
@@ -1079,8 +1081,6 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
 			}
-			if (!ASIC_IS_DCE4(rdev))
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index e192acfbf0c..dc1634bb0c1 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -363,6 +363,7 @@ int radeon_fbdev_init(struct radeon_device *rdev)
 {
 	struct radeon_fbdev *rfbdev;
 	int bpp_sel = 32;
+	int ret;
 
 	/* select 8 bpp console on RN50 or 16MB cards */
 	if (ASIC_IS_RN50(rdev) || rdev->mc.real_vram_size <= (32*1024*1024))
@@ -376,9 +377,14 @@ int radeon_fbdev_init(struct radeon_device *rdev)
 	rdev->mode_info.rfbdev = rfbdev;
 	rfbdev->helper.funcs = &radeon_fb_helper_funcs;
 
-	drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
-			   rdev->num_crtc,
-			   RADEONFB_CONN_LIMIT);
+	ret = drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
+				 rdev->num_crtc,
+				 RADEONFB_CONN_LIMIT);
+	if (ret) {
+		kfree(rfbdev);
+		return ret;
+	}
+
 	drm_fb_helper_single_add_all_connectors(&rfbdev->helper);
 	drm_fb_helper_initial_config(&rfbdev->helper, bpp_sel);
 	return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 04068352ccd..ab389f89fa8 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -118,13 +118,18 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 		value = rdev->num_z_pipes;
 		break;
 	case RADEON_INFO_ACCEL_WORKING:
-		value = rdev->accel_working;
+		/* xf86-video-ati 6.13.0 relies on this being false for evergreen */
+		if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK))
+			value = false;
+		else
+			value = rdev->accel_working;
 		break;
 	case RADEON_INFO_CRTC_FROM_ID:
 		for (i = 0, found = 0; i < rdev->num_crtc; i++) {
 			crtc = (struct drm_crtc *)minfo->crtcs[i];
 			if (crtc && crtc->base.id == value) {
-				value = i;
+				struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+				value = radeon_crtc->crtc_id;
 				found = 1;
 				break;
 			}
@@ -134,6 +139,9 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 			return -EINVAL;
 		}
 		break;
+	case RADEON_INFO_ACCEL_WORKING2:
+		value = rdev->accel_working;
+		break;
 	default:
 		DRM_DEBUG("Invalid request %d\n", info->request);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 5a13b3eeef1..5688a0cf6bb 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -108,6 +108,7 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
 		udelay(panel_pwr_delay * 1000);
 		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
 		WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+		udelay(panel_pwr_delay * 1000);
 		break;
 	}
 
@@ -928,16 +929,14 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 	if (ASIC_IS_R300(rdev)) {
 		gpiopad_a = RREG32(RADEON_GPIOPAD_A) | 1;
 		disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
-	}
-
-	if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev))
-		disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
-	else
+	} else if (rdev->family != CHIP_R200)
 		disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
-
-	if (rdev->family == CHIP_R200)
+	else if (rdev->family == CHIP_R200)
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
 
+	if (rdev->family >= CHIP_R200)
+		disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
+
 	if (is_tv) {
 		uint32_t dac_cntl;
 
@@ -1002,15 +1001,13 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 	if (ASIC_IS_R300(rdev)) {
 		WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
 		WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
-	}
+	} else if (rdev->family != CHIP_R200)
+		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+	else if (rdev->family == CHIP_R200)
+		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
 
 	if (rdev->family >= CHIP_R200)
 		WREG32(RADEON_DISP_TV_OUT_CNTL, disp_tv_out_cntl);
-	else
-		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
-
-	if (rdev->family == CHIP_R200)
-		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
 
 	if (is_tv)
 		radeon_legacy_tv_mode_set(encoder, mode, adjusted_mode);
@@ -1168,6 +1165,17 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
 	bool color = true;
+	struct drm_crtc *crtc;
+
+	/* find out if crtc2 is in use or if this encoder is using it */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+		if ((radeon_crtc->crtc_id == 1) && crtc->enabled) {
+			if (encoder->crtc != crtc) {
+				return connector_status_disconnected;
+			}
+		}
+	}
 
 	if (connector->connector_type == DRM_MODE_CONNECTOR_SVIDEO ||
 	    connector->connector_type == DRM_MODE_CONNECTOR_Composite ||
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index f2ed27c8055..03204039774 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -642,8 +642,8 @@ void radeon_legacy_tv_mode_set(struct drm_encoder *encoder,
 	}
 	flicker_removal = (tmp + 500) / 1000;
 
-	if (flicker_removal < 2)
-		flicker_removal = 2;
+	if (flicker_removal < 3)
+		flicker_removal = 3;
 	for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
 		if (flicker_removal == SLOPE_limit[i])
 			break;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 67358baf28b..95696aa57ac 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -206,6 +206,7 @@ enum radeon_connector_table {
 	CT_MINI_INTERNAL,
 	CT_IMAC_G5_ISIGHT,
 	CT_EMAC,
+	CT_RN50_POWER,
 };
 
 enum radeon_dvo_chip {
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index a8d162c6f82..3fa6984d989 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -33,6 +33,14 @@
 #define RADEON_WAIT_VBLANK_TIMEOUT 200
 #define RADEON_WAIT_IDLE_TIMEOUT 200
 
+static const char *radeon_pm_state_type_name[5] = {
+	"Default",
+	"Powersave",
+	"Battery",
+	"Balanced",
+	"Performance",
+};
+
 static void radeon_dynpm_idle_work_handler(struct work_struct *work);
 static int radeon_debugfs_pm_init(struct radeon_device *rdev);
 static bool radeon_pm_in_vbl(struct radeon_device *rdev);
@@ -84,9 +92,9 @@ static void radeon_pm_update_profile(struct radeon_device *rdev)
 				rdev->pm.profile_index = PM_PROFILE_HIGH_SH_IDX;
 		} else {
 			if (rdev->pm.active_crtc_count > 1)
-				rdev->pm.profile_index = PM_PROFILE_LOW_MH_IDX;
+				rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
 			else
-				rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
+				rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
 		}
 		break;
 	case PM_PROFILE_LOW:
@@ -95,6 +103,12 @@ static void radeon_pm_update_profile(struct radeon_device *rdev)
 		else
 			rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
 		break;
+	case PM_PROFILE_MID:
+		if (rdev->pm.active_crtc_count > 1)
+			rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
+		else
+			rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
+		break;
 	case PM_PROFILE_HIGH:
 		if (rdev->pm.active_crtc_count > 1)
 			rdev->pm.profile_index = PM_PROFILE_HIGH_MH_IDX;
@@ -127,15 +141,6 @@ static void radeon_unmap_vram_bos(struct radeon_device *rdev)
 		if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
 			ttm_bo_unmap_virtual(&bo->tbo);
 	}
-
-	if (rdev->gart.table.vram.robj)
-		ttm_bo_unmap_virtual(&rdev->gart.table.vram.robj->tbo);
-
-	if (rdev->stollen_vga_memory)
-		ttm_bo_unmap_virtual(&rdev->stollen_vga_memory->tbo);
-
-	if (rdev->r600_blit.shader_obj)
-		ttm_bo_unmap_virtual(&rdev->r600_blit.shader_obj->tbo);
 }
 
 static void radeon_sync_with_vblank(struct radeon_device *rdev)
@@ -151,6 +156,7 @@ static void radeon_sync_with_vblank(struct radeon_device *rdev)
 static void radeon_set_power_state(struct radeon_device *rdev)
 {
 	u32 sclk, mclk;
+	bool misc_after = false;
 
 	if ((rdev->pm.requested_clock_mode_index == rdev->pm.current_clock_mode_index) &&
 	    (rdev->pm.requested_power_state_index == rdev->pm.current_power_state_index))
@@ -167,55 +173,47 @@ static void radeon_set_power_state(struct radeon_device *rdev)
 		if (mclk > rdev->clock.default_mclk)
 			mclk = rdev->clock.default_mclk;
 
-		/* voltage, pcie lanes, etc.*/
-		radeon_pm_misc(rdev);
+		/* upvolt before raising clocks, downvolt after lowering clocks */
+		if (sclk < rdev->pm.current_sclk)
+			misc_after = true;
 
-		if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
-			radeon_sync_with_vblank(rdev);
+		radeon_sync_with_vblank(rdev);
 
+		if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
 			if (!radeon_pm_in_vbl(rdev))
 				return;
+		}
 
-			radeon_pm_prepare(rdev);
-			/* set engine clock */
-			if (sclk != rdev->pm.current_sclk) {
-				radeon_pm_debug_check_in_vbl(rdev, false);
-				radeon_set_engine_clock(rdev, sclk);
-				radeon_pm_debug_check_in_vbl(rdev, true);
-				rdev->pm.current_sclk = sclk;
-				DRM_DEBUG("Setting: e: %d\n", sclk);
-			}
+		radeon_pm_prepare(rdev);
 
-			/* set memory clock */
-			if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
-				radeon_pm_debug_check_in_vbl(rdev, false);
-				radeon_set_memory_clock(rdev, mclk);
-				radeon_pm_debug_check_in_vbl(rdev, true);
-				rdev->pm.current_mclk = mclk;
-				DRM_DEBUG("Setting: m: %d\n", mclk);
-			}
-			radeon_pm_finish(rdev);
-		} else {
-			/* set engine clock */
-			if (sclk != rdev->pm.current_sclk) {
-				radeon_sync_with_vblank(rdev);
-				radeon_pm_prepare(rdev);
-				radeon_set_engine_clock(rdev, sclk);
-				radeon_pm_finish(rdev);
-				rdev->pm.current_sclk = sclk;
-				DRM_DEBUG("Setting: e: %d\n", sclk);
-			}
-			/* set memory clock */
-			if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
-				radeon_sync_with_vblank(rdev);
-				radeon_pm_prepare(rdev);
-				radeon_set_memory_clock(rdev, mclk);
-				radeon_pm_finish(rdev);
-				rdev->pm.current_mclk = mclk;
-				DRM_DEBUG("Setting: m: %d\n", mclk);
-			}
+		if (!misc_after)
+			/* voltage, pcie lanes, etc.*/
+			radeon_pm_misc(rdev);
+
+		/* set engine clock */
+		if (sclk != rdev->pm.current_sclk) {
+			radeon_pm_debug_check_in_vbl(rdev, false);
+			radeon_set_engine_clock(rdev, sclk);
+			radeon_pm_debug_check_in_vbl(rdev, true);
+			rdev->pm.current_sclk = sclk;
+			DRM_DEBUG("Setting: e: %d\n", sclk);
 		}
 
+		/* set memory clock */
+		if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
+			radeon_pm_debug_check_in_vbl(rdev, false);
+			radeon_set_memory_clock(rdev, mclk);
+			radeon_pm_debug_check_in_vbl(rdev, true);
+			rdev->pm.current_mclk = mclk;
+			DRM_DEBUG("Setting: m: %d\n", mclk);
+		}
+
+		if (misc_after)
+			/* voltage, pcie lanes, etc.*/
+			radeon_pm_misc(rdev);
+
+		radeon_pm_finish(rdev);
+
 		rdev->pm.current_power_state_index = rdev->pm.requested_power_state_index;
 		rdev->pm.current_clock_mode_index = rdev->pm.requested_clock_mode_index;
 	} else
@@ -288,6 +286,42 @@ static void radeon_pm_set_clocks(struct radeon_device *rdev)
 	mutex_unlock(&rdev->ddev->struct_mutex);
 }
 
+static void radeon_pm_print_states(struct radeon_device *rdev)
+{
+	int i, j;
+	struct radeon_power_state *power_state;
+	struct radeon_pm_clock_info *clock_info;
+
+	DRM_DEBUG("%d Power State(s)\n", rdev->pm.num_power_states);
+	for (i = 0; i < rdev->pm.num_power_states; i++) {
+		power_state = &rdev->pm.power_state[i];
+		DRM_DEBUG("State %d: %s\n", i,
+			radeon_pm_state_type_name[power_state->type]);
+		if (i == rdev->pm.default_power_state_index)
+			DRM_DEBUG("\tDefault");
+		if ((rdev->flags & RADEON_IS_PCIE) && !(rdev->flags & RADEON_IS_IGP))
+			DRM_DEBUG("\t%d PCIE Lanes\n", power_state->pcie_lanes);
+		if (power_state->flags & RADEON_PM_STATE_SINGLE_DISPLAY_ONLY)
+			DRM_DEBUG("\tSingle display only\n");
+		DRM_DEBUG("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
+		for (j = 0; j < power_state->num_clock_modes; j++) {
+			clock_info = &(power_state->clock_info[j]);
+			if (rdev->flags & RADEON_IS_IGP)
+				DRM_DEBUG("\t\t%d e: %d%s\n",
+					j,
+					clock_info->sclk * 10,
+					clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+			else
+				DRM_DEBUG("\t\t%d e: %d\tm: %d\tv: %d%s\n",
+					j,
+					clock_info->sclk * 10,
+					clock_info->mclk * 10,
+					clock_info->voltage.voltage,
+					clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+		}
+	}
+}
+
 static ssize_t radeon_get_pm_profile(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
@@ -299,6 +333,7 @@ static ssize_t radeon_get_pm_profile(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			(cp == PM_PROFILE_AUTO) ? "auto" :
 			(cp == PM_PROFILE_LOW) ? "low" :
+			(cp == PM_PROFILE_MID) ? "mid" :
 			(cp == PM_PROFILE_HIGH) ? "high" : "default");
 }
 
@@ -318,6 +353,8 @@ static ssize_t radeon_set_pm_profile(struct device *dev,
 			rdev->pm.profile = PM_PROFILE_AUTO;
 		else if (strncmp("low", buf, strlen("low")) == 0)
 			rdev->pm.profile = PM_PROFILE_LOW;
+		else if (strncmp("mid", buf, strlen("mid")) == 0)
+			rdev->pm.profile = PM_PROFILE_MID;
 		else if (strncmp("high", buf, strlen("high")) == 0)
 			rdev->pm.profile = PM_PROFILE_HIGH;
 		else {
@@ -361,13 +398,20 @@ static ssize_t radeon_set_pm_method(struct device *dev,
 		rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
 		mutex_unlock(&rdev->pm.mutex);
 	} else if (strncmp("profile", buf, strlen("profile")) == 0) {
+		bool flush_wq = false;
+
 		mutex_lock(&rdev->pm.mutex);
-		rdev->pm.pm_method = PM_METHOD_PROFILE;
+		if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+			cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+			flush_wq = true;
+		}
 		/* disable dynpm */
 		rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 		rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
-		cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+		rdev->pm.pm_method = PM_METHOD_PROFILE;
 		mutex_unlock(&rdev->pm.mutex);
+		if (flush_wq)
+			flush_workqueue(rdev->wq);
 	} else {
 		DRM_ERROR("invalid power method!\n");
 		goto fail;
@@ -382,17 +426,36 @@ static DEVICE_ATTR(power_method, S_IRUGO | S_IWUSR, radeon_get_pm_method, radeon
 
 void radeon_pm_suspend(struct radeon_device *rdev)
 {
+	bool flush_wq = false;
+
 	mutex_lock(&rdev->pm.mutex);
-	cancel_delayed_work(&rdev->pm.dynpm_idle_work);
-	rdev->pm.current_power_state_index = -1;
-	rdev->pm.current_clock_mode_index = -1;
-	rdev->pm.current_sclk = 0;
-	rdev->pm.current_mclk = 0;
+	if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+		cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+		if (rdev->pm.dynpm_state == DYNPM_STATE_ACTIVE)
+			rdev->pm.dynpm_state = DYNPM_STATE_SUSPENDED;
+		flush_wq = true;
+	}
 	mutex_unlock(&rdev->pm.mutex);
+	if (flush_wq)
+		flush_workqueue(rdev->wq);
 }
 
 void radeon_pm_resume(struct radeon_device *rdev)
 {
+	/* asic init will reset the default power state */
+	mutex_lock(&rdev->pm.mutex);
+	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+	rdev->pm.current_clock_mode_index = 0;
+	rdev->pm.current_sclk = rdev->clock.default_sclk;
+	rdev->pm.current_mclk = rdev->clock.default_mclk;
+	rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+	if (rdev->pm.pm_method == PM_METHOD_DYNPM
+	    && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
+		rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
+		queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
+	}
+	mutex_unlock(&rdev->pm.mutex);
 	radeon_pm_compute_clocks(rdev);
 }
 
@@ -401,32 +464,24 @@ int radeon_pm_init(struct radeon_device *rdev)
 	int ret;
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
+	rdev->pm.profile = PM_PROFILE_DEFAULT;
 	rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 	rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
 	rdev->pm.dynpm_can_upclock = true;
 	rdev->pm.dynpm_can_downclock = true;
-	rdev->pm.current_sclk = 0;
-	rdev->pm.current_mclk = 0;
+	rdev->pm.current_sclk = rdev->clock.default_sclk;
+	rdev->pm.current_mclk = rdev->clock.default_mclk;
 
 	if (rdev->bios) {
 		if (rdev->is_atom_bios)
 			radeon_atombios_get_power_modes(rdev);
 		else
 			radeon_combios_get_power_modes(rdev);
+		radeon_pm_print_states(rdev);
 		radeon_pm_init_profile(rdev);
-		rdev->pm.current_power_state_index = -1;
-		rdev->pm.current_clock_mode_index = -1;
 	}
 
 	if (rdev->pm.num_power_states > 1) {
-		if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
-			mutex_lock(&rdev->pm.mutex);
-			rdev->pm.profile = PM_PROFILE_DEFAULT;
-			radeon_pm_update_profile(rdev);
-			radeon_pm_set_clocks(rdev);
-			mutex_unlock(&rdev->pm.mutex);
-		}
-
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);
 		if (ret)
@@ -454,6 +509,8 @@ int radeon_pm_init(struct radeon_device *rdev)
 void radeon_pm_fini(struct radeon_device *rdev)
 {
 	if (rdev->pm.num_power_states > 1) {
+		bool flush_wq = false;
+
 		mutex_lock(&rdev->pm.mutex);
 		if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
 			rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -461,13 +518,16 @@ void radeon_pm_fini(struct radeon_device *rdev)
 			radeon_pm_set_clocks(rdev);
 		} else if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
 			/* cancel work */
-			cancel_delayed_work_sync(&rdev->pm.dynpm_idle_work);
+			cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+			flush_wq = true;
 			/* reset default clocks */
 			rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 			rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
 			radeon_pm_set_clocks(rdev);
 		}
 		mutex_unlock(&rdev->pm.mutex);
+		if (flush_wq)
+			flush_workqueue(rdev->wq);
 
 		device_remove_file(rdev->dev, &dev_attr_power_profile);
 		device_remove_file(rdev->dev, &dev_attr_power_method);
@@ -688,12 +748,12 @@ static void radeon_dynpm_idle_work_handler(struct work_struct *work)
 			radeon_pm_get_dynpm_state(rdev);
 			radeon_pm_set_clocks(rdev);
 		}
+
+		queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
 	}
 	mutex_unlock(&rdev->pm.mutex);
 	ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-
-	queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
-					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
 }
 
 /*
@@ -712,6 +772,8 @@ static int radeon_debugfs_pm_info(struct seq_file *m, void *data)
 	seq_printf(m, "default memory clock: %u0 kHz\n", rdev->clock.default_mclk);
 	if (rdev->asic->get_memory_clock)
 		seq_printf(m, "current memory clock: %u0 kHz\n", radeon_get_memory_clock(rdev));
+	if (rdev->pm.current_vddc)
+		seq_printf(m, "voltage: %u mV\n", rdev->pm.current_vddc);
 	if (rdev->asic->get_pcie_lanes)
 		seq_printf(m, "PCIE lanes: %d\n", radeon_get_pcie_lanes(rdev));
 
diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen
new file mode 100644
index 00000000000..f78fd592544
--- /dev/null
+++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen
@@ -0,0 +1,611 @@
+evergreen 0x9400
+0x00008040 WAIT_UNTIL
+0x00008044 WAIT_UNTIL_POLL_CNTL
+0x00008048 WAIT_UNTIL_POLL_MASK
+0x0000804c WAIT_UNTIL_POLL_REFDATA
+0x000088B0 VGT_VTX_VECT_EJECT_REG
+0x000088C4 VGT_CACHE_INVALIDATION
+0x000088D4 VGT_GS_VERTEX_REUSE
+0x00008958 VGT_PRIMITIVE_TYPE
+0x0000895C VGT_INDEX_TYPE
+0x00008970 VGT_NUM_INDICES
+0x00008974 VGT_NUM_INSTANCES
+0x00008990 VGT_COMPUTE_DIM_X
+0x00008994 VGT_COMPUTE_DIM_Y
+0x00008998 VGT_COMPUTE_DIM_Z
+0x0000899C VGT_COMPUTE_START_X
+0x000089A0 VGT_COMPUTE_START_Y
+0x000089A4 VGT_COMPUTE_START_Z
+0x000089AC VGT_COMPUTE_THREAD_GOURP_SIZE
+0x00008A14 PA_CL_ENHANCE
+0x00008A60 PA_SC_LINE_STIPPLE_VALUE
+0x00008B10 PA_SC_LINE_STIPPLE_STATE
+0x00008BF0 PA_SC_ENHANCE
+0x00008D8C SQ_DYN_GPR_CNTL_PS_FLUSH_REQ
+0x00008C00 SQ_CONFIG
+0x00008C04 SQ_GPR_RESOURCE_MGMT_1
+0x00008C08 SQ_GPR_RESOURCE_MGMT_2
+0x00008C0C SQ_GPR_RESOURCE_MGMT_3
+0x00008C10 SQ_GLOBAL_GPR_RESOURCE_MGMT_1
+0x00008C14 SQ_GLOBAL_GPR_RESOURCE_MGMT_2
+0x00008C18 SQ_THREAD_RESOURCE_MGMT
+0x00008C1C SQ_THREAD_RESOURCE_MGMT_2
+0x00008C20 SQ_STACK_RESOURCE_MGMT_1
+0x00008C24 SQ_STACK_RESOURCE_MGMT_2
+0x00008C28 SQ_STACK_RESOURCE_MGMT_3
+0x00008DF8 SQ_CONST_MEM_BASE
+0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
+0x00009100 SPI_CONFIG_CNTL
+0x0000913C SPI_CONFIG_CNTL_1
+0x00009700 VC_CNTL
+0x00009714 VC_ENHANCE
+0x00009830 DB_DEBUG
+0x00009834 DB_DEBUG2
+0x00009838 DB_DEBUG3
+0x0000983C DB_DEBUG4
+0x00009854 DB_WATERMARKS
+0x0000A400 TD_PS_BORDER_COLOR_INDEX
+0x0000A404 TD_PS_BORDER_COLOR_RED
+0x0000A408 TD_PS_BORDER_COLOR_GREEN
+0x0000A40C TD_PS_BORDER_COLOR_BLUE
+0x0000A410 TD_PS_BORDER_COLOR_ALPHA
+0x0000A414 TD_VS_BORDER_COLOR_INDEX
+0x0000A418 TD_VS_BORDER_COLOR_RED
+0x0000A41C TD_VS_BORDER_COLOR_GREEN
+0x0000A420 TD_VS_BORDER_COLOR_BLUE
+0x0000A424 TD_VS_BORDER_COLOR_ALPHA
+0x0000A428 TD_GS_BORDER_COLOR_INDEX
+0x0000A42C TD_GS_BORDER_COLOR_RED
+0x0000A430 TD_GS_BORDER_COLOR_GREEN
+0x0000A434 TD_GS_BORDER_COLOR_BLUE
+0x0000A438 TD_GS_BORDER_COLOR_ALPHA
+0x0000A43C TD_HS_BORDER_COLOR_INDEX
+0x0000A440 TD_HS_BORDER_COLOR_RED
+0x0000A444 TD_HS_BORDER_COLOR_GREEN
+0x0000A448 TD_HS_BORDER_COLOR_BLUE
+0x0000A44C TD_HS_BORDER_COLOR_ALPHA
+0x0000A450 TD_LS_BORDER_COLOR_INDEX
+0x0000A454 TD_LS_BORDER_COLOR_RED
+0x0000A458 TD_LS_BORDER_COLOR_GREEN
+0x0000A45C TD_LS_BORDER_COLOR_BLUE
+0x0000A460 TD_LS_BORDER_COLOR_ALPHA
+0x0000A464 TD_CS_BORDER_COLOR_INDEX
+0x0000A468 TD_CS_BORDER_COLOR_RED
+0x0000A46C TD_CS_BORDER_COLOR_GREEN
+0x0000A470 TD_CS_BORDER_COLOR_BLUE
+0x0000A474 TD_CS_BORDER_COLOR_ALPHA
+0x00028000 DB_RENDER_CONTROL
+0x00028004 DB_COUNT_CONTROL
+0x0002800C DB_RENDER_OVERRIDE
+0x00028010 DB_RENDER_OVERRIDE2
+0x00028028 DB_STENCIL_CLEAR
+0x0002802C DB_DEPTH_CLEAR
+0x00028030 PA_SC_SCREEN_SCISSOR_TL
+0x00028034 PA_SC_SCREEN_SCISSOR_BR
+0x0002805C DB_DEPTH_SLICE
+0x00028140 SQ_ALU_CONST_BUFFER_SIZE_PS_0
+0x00028144 SQ_ALU_CONST_BUFFER_SIZE_PS_1
+0x00028148 SQ_ALU_CONST_BUFFER_SIZE_PS_2
+0x0002814C SQ_ALU_CONST_BUFFER_SIZE_PS_3
+0x00028150 SQ_ALU_CONST_BUFFER_SIZE_PS_4
+0x00028154 SQ_ALU_CONST_BUFFER_SIZE_PS_5
+0x00028158 SQ_ALU_CONST_BUFFER_SIZE_PS_6
+0x0002815C SQ_ALU_CONST_BUFFER_SIZE_PS_7
+0x00028160 SQ_ALU_CONST_BUFFER_SIZE_PS_8
+0x00028164 SQ_ALU_CONST_BUFFER_SIZE_PS_9
+0x00028168 SQ_ALU_CONST_BUFFER_SIZE_PS_10
+0x0002816C SQ_ALU_CONST_BUFFER_SIZE_PS_11
+0x00028170 SQ_ALU_CONST_BUFFER_SIZE_PS_12
+0x00028174 SQ_ALU_CONST_BUFFER_SIZE_PS_13
+0x00028178 SQ_ALU_CONST_BUFFER_SIZE_PS_14
+0x0002817C SQ_ALU_CONST_BUFFER_SIZE_PS_15
+0x00028180 SQ_ALU_CONST_BUFFER_SIZE_VS_0
+0x00028184 SQ_ALU_CONST_BUFFER_SIZE_VS_1
+0x00028188 SQ_ALU_CONST_BUFFER_SIZE_VS_2
+0x0002818C SQ_ALU_CONST_BUFFER_SIZE_VS_3
+0x00028190 SQ_ALU_CONST_BUFFER_SIZE_VS_4
+0x00028194 SQ_ALU_CONST_BUFFER_SIZE_VS_5
+0x00028198 SQ_ALU_CONST_BUFFER_SIZE_VS_6
+0x0002819C SQ_ALU_CONST_BUFFER_SIZE_VS_7
+0x000281A0 SQ_ALU_CONST_BUFFER_SIZE_VS_8
+0x000281A4 SQ_ALU_CONST_BUFFER_SIZE_VS_9
+0x000281A8 SQ_ALU_CONST_BUFFER_SIZE_VS_10
+0x000281AC SQ_ALU_CONST_BUFFER_SIZE_VS_11
+0x000281B0 SQ_ALU_CONST_BUFFER_SIZE_VS_12
+0x000281B4 SQ_ALU_CONST_BUFFER_SIZE_VS_13
+0x000281B8 SQ_ALU_CONST_BUFFER_SIZE_VS_14
+0x000281BC SQ_ALU_CONST_BUFFER_SIZE_VS_15
+0x000281C0 SQ_ALU_CONST_BUFFER_SIZE_GS_0
+0x000281C4 SQ_ALU_CONST_BUFFER_SIZE_GS_1
+0x000281C8 SQ_ALU_CONST_BUFFER_SIZE_GS_2
+0x000281CC SQ_ALU_CONST_BUFFER_SIZE_GS_3
+0x000281D0 SQ_ALU_CONST_BUFFER_SIZE_GS_4
+0x000281D4 SQ_ALU_CONST_BUFFER_SIZE_GS_5
+0x000281D8 SQ_ALU_CONST_BUFFER_SIZE_GS_6
+0x000281DC SQ_ALU_CONST_BUFFER_SIZE_GS_7
+0x000281E0 SQ_ALU_CONST_BUFFER_SIZE_GS_8
+0x000281E4 SQ_ALU_CONST_BUFFER_SIZE_GS_9
+0x000281E8 SQ_ALU_CONST_BUFFER_SIZE_GS_10
+0x000281EC SQ_ALU_CONST_BUFFER_SIZE_GS_11
+0x000281F0 SQ_ALU_CONST_BUFFER_SIZE_GS_12
+0x000281F4 SQ_ALU_CONST_BUFFER_SIZE_GS_13
+0x000281F8 SQ_ALU_CONST_BUFFER_SIZE_GS_14
+0x000281FC SQ_ALU_CONST_BUFFER_SIZE_GS_15
+0x00028200 PA_SC_WINDOW_OFFSET
+0x00028204 PA_SC_WINDOW_SCISSOR_TL
+0x00028208 PA_SC_WINDOW_SCISSOR_BR
+0x0002820C PA_SC_CLIPRECT_RULE
+0x00028210 PA_SC_CLIPRECT_0_TL
+0x00028214 PA_SC_CLIPRECT_0_BR
+0x00028218 PA_SC_CLIPRECT_1_TL
+0x0002821C PA_SC_CLIPRECT_1_BR
+0x00028220 PA_SC_CLIPRECT_2_TL
+0x00028224 PA_SC_CLIPRECT_2_BR
+0x00028228 PA_SC_CLIPRECT_3_TL
+0x0002822C PA_SC_CLIPRECT_3_BR
+0x00028230 PA_SC_EDGERULE
+0x00028234 PA_SU_HARDWARE_SCREEN_OFFSET
+0x00028240 PA_SC_GENERIC_SCISSOR_TL
+0x00028244 PA_SC_GENERIC_SCISSOR_BR
+0x00028250 PA_SC_VPORT_SCISSOR_0_TL
+0x00028254 PA_SC_VPORT_SCISSOR_0_BR
+0x00028258 PA_SC_VPORT_SCISSOR_1_TL
+0x0002825C PA_SC_VPORT_SCISSOR_1_BR
+0x00028260 PA_SC_VPORT_SCISSOR_2_TL
+0x00028264 PA_SC_VPORT_SCISSOR_2_BR
+0x00028268 PA_SC_VPORT_SCISSOR_3_TL
+0x0002826C PA_SC_VPORT_SCISSOR_3_BR
+0x00028270 PA_SC_VPORT_SCISSOR_4_TL
+0x00028274 PA_SC_VPORT_SCISSOR_4_BR
+0x00028278 PA_SC_VPORT_SCISSOR_5_TL
+0x0002827C PA_SC_VPORT_SCISSOR_5_BR
+0x00028280 PA_SC_VPORT_SCISSOR_6_TL
+0x00028284 PA_SC_VPORT_SCISSOR_6_BR
+0x00028288 PA_SC_VPORT_SCISSOR_7_TL
+0x0002828C PA_SC_VPORT_SCISSOR_7_BR
+0x00028290 PA_SC_VPORT_SCISSOR_8_TL
+0x00028294 PA_SC_VPORT_SCISSOR_8_BR
+0x00028298 PA_SC_VPORT_SCISSOR_9_TL
+0x0002829C PA_SC_VPORT_SCISSOR_9_BR
+0x000282A0 PA_SC_VPORT_SCISSOR_10_TL
+0x000282A4 PA_SC_VPORT_SCISSOR_10_BR
+0x000282A8 PA_SC_VPORT_SCISSOR_11_TL
+0x000282AC PA_SC_VPORT_SCISSOR_11_BR
+0x000282B0 PA_SC_VPORT_SCISSOR_12_TL
+0x000282B4 PA_SC_VPORT_SCISSOR_12_BR
+0x000282B8 PA_SC_VPORT_SCISSOR_13_TL
+0x000282BC PA_SC_VPORT_SCISSOR_13_BR
+0x000282C0 PA_SC_VPORT_SCISSOR_14_TL
+0x000282C4 PA_SC_VPORT_SCISSOR_14_BR
+0x000282C8 PA_SC_VPORT_SCISSOR_15_TL
+0x000282CC PA_SC_VPORT_SCISSOR_15_BR
+0x000282D0 PA_SC_VPORT_ZMIN_0
+0x000282D4 PA_SC_VPORT_ZMAX_0
+0x000282D8 PA_SC_VPORT_ZMIN_1
+0x000282DC PA_SC_VPORT_ZMAX_1
+0x000282E0 PA_SC_VPORT_ZMIN_2
+0x000282E4 PA_SC_VPORT_ZMAX_2
+0x000282E8 PA_SC_VPORT_ZMIN_3
+0x000282EC PA_SC_VPORT_ZMAX_3
+0x000282F0 PA_SC_VPORT_ZMIN_4
+0x000282F4 PA_SC_VPORT_ZMAX_4
+0x000282F8 PA_SC_VPORT_ZMIN_5
+0x000282FC PA_SC_VPORT_ZMAX_5
+0x00028300 PA_SC_VPORT_ZMIN_6
+0x00028304 PA_SC_VPORT_ZMAX_6
+0x00028308 PA_SC_VPORT_ZMIN_7
+0x0002830C PA_SC_VPORT_ZMAX_7
+0x00028310 PA_SC_VPORT_ZMIN_8
+0x00028314 PA_SC_VPORT_ZMAX_8
+0x00028318 PA_SC_VPORT_ZMIN_9
+0x0002831C PA_SC_VPORT_ZMAX_9
+0x00028320 PA_SC_VPORT_ZMIN_10
+0x00028324 PA_SC_VPORT_ZMAX_10
+0x00028328 PA_SC_VPORT_ZMIN_11
+0x0002832C PA_SC_VPORT_ZMAX_11
+0x00028330 PA_SC_VPORT_ZMIN_12
+0x00028334 PA_SC_VPORT_ZMAX_12
+0x00028338 PA_SC_VPORT_ZMIN_13
+0x0002833C PA_SC_VPORT_ZMAX_13
+0x00028340 PA_SC_VPORT_ZMIN_14
+0x00028344 PA_SC_VPORT_ZMAX_14
+0x00028348 PA_SC_VPORT_ZMIN_15
+0x0002834C PA_SC_VPORT_ZMAX_15
+0x00028350 SX_MISC
+0x00028380 SQ_VTX_SEMANTIC_0
+0x00028384 SQ_VTX_SEMANTIC_1
+0x00028388 SQ_VTX_SEMANTIC_2
+0x0002838C SQ_VTX_SEMANTIC_3
+0x00028390 SQ_VTX_SEMANTIC_4
+0x00028394 SQ_VTX_SEMANTIC_5
+0x00028398 SQ_VTX_SEMANTIC_6
+0x0002839C SQ_VTX_SEMANTIC_7
+0x000283A0 SQ_VTX_SEMANTIC_8
+0x000283A4 SQ_VTX_SEMANTIC_9
+0x000283A8 SQ_VTX_SEMANTIC_10
+0x000283AC SQ_VTX_SEMANTIC_11
+0x000283B0 SQ_VTX_SEMANTIC_12
+0x000283B4 SQ_VTX_SEMANTIC_13
+0x000283B8 SQ_VTX_SEMANTIC_14
+0x000283BC SQ_VTX_SEMANTIC_15
+0x000283C0 SQ_VTX_SEMANTIC_16
+0x000283C4 SQ_VTX_SEMANTIC_17
+0x000283C8 SQ_VTX_SEMANTIC_18
+0x000283CC SQ_VTX_SEMANTIC_19
+0x000283D0 SQ_VTX_SEMANTIC_20
+0x000283D4 SQ_VTX_SEMANTIC_21
+0x000283D8 SQ_VTX_SEMANTIC_22
+0x000283DC SQ_VTX_SEMANTIC_23
+0x000283E0 SQ_VTX_SEMANTIC_24
+0x000283E4 SQ_VTX_SEMANTIC_25
+0x000283E8 SQ_VTX_SEMANTIC_26
+0x000283EC SQ_VTX_SEMANTIC_27
+0x000283F0 SQ_VTX_SEMANTIC_28
+0x000283F4 SQ_VTX_SEMANTIC_29
+0x000283F8 SQ_VTX_SEMANTIC_30
+0x000283FC SQ_VTX_SEMANTIC_31
+0x00028400 VGT_MAX_VTX_INDX
+0x00028404 VGT_MIN_VTX_INDX
+0x00028408 VGT_INDX_OFFSET
+0x0002840C VGT_MULTI_PRIM_IB_RESET_INDX
+0x00028410 SX_ALPHA_TEST_CONTROL
+0x00028414 CB_BLEND_RED
+0x00028418 CB_BLEND_GREEN
+0x0002841C CB_BLEND_BLUE
+0x00028420 CB_BLEND_ALPHA
+0x00028430 DB_STENCILREFMASK
+0x00028434 DB_STENCILREFMASK_BF
+0x00028438 SX_ALPHA_REF
+0x0002843C PA_CL_VPORT_XSCALE_0
+0x00028440 PA_CL_VPORT_XOFFSET_0
+0x00028444 PA_CL_VPORT_YSCALE_0
+0x00028448 PA_CL_VPORT_YOFFSET_0
+0x0002844C PA_CL_VPORT_ZSCALE_0
+0x00028450 PA_CL_VPORT_ZOFFSET_0
+0x00028454 PA_CL_VPORT_XSCALE_1
+0x00028458 PA_CL_VPORT_XOFFSET_1
+0x0002845C PA_CL_VPORT_YSCALE_1
+0x00028460 PA_CL_VPORT_YOFFSET_1
+0x00028464 PA_CL_VPORT_ZSCALE_1
+0x00028468 PA_CL_VPORT_ZOFFSET_1
+0x0002846C PA_CL_VPORT_XSCALE_2
+0x00028470 PA_CL_VPORT_XOFFSET_2
+0x00028474 PA_CL_VPORT_YSCALE_2
+0x00028478 PA_CL_VPORT_YOFFSET_2
+0x0002847C PA_CL_VPORT_ZSCALE_2
+0x00028480 PA_CL_VPORT_ZOFFSET_2
+0x00028484 PA_CL_VPORT_XSCALE_3
+0x00028488 PA_CL_VPORT_XOFFSET_3
+0x0002848C PA_CL_VPORT_YSCALE_3
+0x00028490 PA_CL_VPORT_YOFFSET_3
+0x00028494 PA_CL_VPORT_ZSCALE_3
+0x00028498 PA_CL_VPORT_ZOFFSET_3
+0x0002849C PA_CL_VPORT_XSCALE_4
+0x000284A0 PA_CL_VPORT_XOFFSET_4
+0x000284A4 PA_CL_VPORT_YSCALE_4
+0x000284A8 PA_CL_VPORT_YOFFSET_4
+0x000284AC PA_CL_VPORT_ZSCALE_4
+0x000284B0 PA_CL_VPORT_ZOFFSET_4
+0x000284B4 PA_CL_VPORT_XSCALE_5
+0x000284B8 PA_CL_VPORT_XOFFSET_5
+0x000284BC PA_CL_VPORT_YSCALE_5
+0x000284C0 PA_CL_VPORT_YOFFSET_5
+0x000284C4 PA_CL_VPORT_ZSCALE_5
+0x000284C8 PA_CL_VPORT_ZOFFSET_5
+0x000284CC PA_CL_VPORT_XSCALE_6
+0x000284D0 PA_CL_VPORT_XOFFSET_6
+0x000284D4 PA_CL_VPORT_YSCALE_6
+0x000284D8 PA_CL_VPORT_YOFFSET_6
+0x000284DC PA_CL_VPORT_ZSCALE_6
+0x000284E0 PA_CL_VPORT_ZOFFSET_6
+0x000284E4 PA_CL_VPORT_XSCALE_7
+0x000284E8 PA_CL_VPORT_XOFFSET_7
+0x000284EC PA_CL_VPORT_YSCALE_7
+0x000284F0 PA_CL_VPORT_YOFFSET_7
+0x000284F4 PA_CL_VPORT_ZSCALE_7
+0x000284F8 PA_CL_VPORT_ZOFFSET_7
+0x000284FC PA_CL_VPORT_XSCALE_8
+0x00028500 PA_CL_VPORT_XOFFSET_8
+0x00028504 PA_CL_VPORT_YSCALE_8
+0x00028508 PA_CL_VPORT_YOFFSET_8
+0x0002850C PA_CL_VPORT_ZSCALE_8
+0x00028510 PA_CL_VPORT_ZOFFSET_8
+0x00028514 PA_CL_VPORT_XSCALE_9
+0x00028518 PA_CL_VPORT_XOFFSET_9
+0x0002851C PA_CL_VPORT_YSCALE_9
+0x00028520 PA_CL_VPORT_YOFFSET_9
+0x00028524 PA_CL_VPORT_ZSCALE_9
+0x00028528 PA_CL_VPORT_ZOFFSET_9
+0x0002852C PA_CL_VPORT_XSCALE_10
+0x00028530 PA_CL_VPORT_XOFFSET_10
+0x00028534 PA_CL_VPORT_YSCALE_10
+0x00028538 PA_CL_VPORT_YOFFSET_10
+0x0002853C PA_CL_VPORT_ZSCALE_10
+0x00028540 PA_CL_VPORT_ZOFFSET_10
+0x00028544 PA_CL_VPORT_XSCALE_11
+0x00028548 PA_CL_VPORT_XOFFSET_11
+0x0002854C PA_CL_VPORT_YSCALE_11
+0x00028550 PA_CL_VPORT_YOFFSET_11
+0x00028554 PA_CL_VPORT_ZSCALE_11
+0x00028558 PA_CL_VPORT_ZOFFSET_11
+0x0002855C PA_CL_VPORT_XSCALE_12
+0x00028560 PA_CL_VPORT_XOFFSET_12
+0x00028564 PA_CL_VPORT_YSCALE_12
+0x00028568 PA_CL_VPORT_YOFFSET_12
+0x0002856C PA_CL_VPORT_ZSCALE_12
+0x00028570 PA_CL_VPORT_ZOFFSET_12
+0x00028574 PA_CL_VPORT_XSCALE_13
+0x00028578 PA_CL_VPORT_XOFFSET_13
+0x0002857C PA_CL_VPORT_YSCALE_13
+0x00028580 PA_CL_VPORT_YOFFSET_13
+0x00028584 PA_CL_VPORT_ZSCALE_13
+0x00028588 PA_CL_VPORT_ZOFFSET_13
+0x0002858C PA_CL_VPORT_XSCALE_14
+0x00028590 PA_CL_VPORT_XOFFSET_14
+0x00028594 PA_CL_VPORT_YSCALE_14
+0x00028598 PA_CL_VPORT_YOFFSET_14
+0x0002859C PA_CL_VPORT_ZSCALE_14
+0x000285A0 PA_CL_VPORT_ZOFFSET_14
+0x000285A4 PA_CL_VPORT_XSCALE_15
+0x000285A8 PA_CL_VPORT_XOFFSET_15
+0x000285AC PA_CL_VPORT_YSCALE_15
+0x000285B0 PA_CL_VPORT_YOFFSET_15
+0x000285B4 PA_CL_VPORT_ZSCALE_15
+0x000285B8 PA_CL_VPORT_ZOFFSET_15
+0x000285BC PA_CL_UCP_0_X
+0x000285C0 PA_CL_UCP_0_Y
+0x000285C4 PA_CL_UCP_0_Z
+0x000285C8 PA_CL_UCP_0_W
+0x000285CC PA_CL_UCP_1_X
+0x000285D0 PA_CL_UCP_1_Y
+0x000285D4 PA_CL_UCP_1_Z
+0x000285D8 PA_CL_UCP_1_W
+0x000285DC PA_CL_UCP_2_X
+0x000285E0 PA_CL_UCP_2_Y
+0x000285E4 PA_CL_UCP_2_Z
+0x000285E8 PA_CL_UCP_2_W
+0x000285EC PA_CL_UCP_3_X
+0x000285F0 PA_CL_UCP_3_Y
+0x000285F4 PA_CL_UCP_3_Z
+0x000285F8 PA_CL_UCP_3_W
+0x000285FC PA_CL_UCP_4_X
+0x00028600 PA_CL_UCP_4_Y
+0x00028604 PA_CL_UCP_4_Z
+0x00028608 PA_CL_UCP_4_W
+0x0002860C PA_CL_UCP_5_X
+0x00028610 PA_CL_UCP_5_Y
+0x00028614 PA_CL_UCP_5_Z
+0x00028618 PA_CL_UCP_5_W
+0x0002861C SPI_VS_OUT_ID_0
+0x00028620 SPI_VS_OUT_ID_1
+0x00028624 SPI_VS_OUT_ID_2
+0x00028628 SPI_VS_OUT_ID_3
+0x0002862C SPI_VS_OUT_ID_4
+0x00028630 SPI_VS_OUT_ID_5
+0x00028634 SPI_VS_OUT_ID_6
+0x00028638 SPI_VS_OUT_ID_7
+0x0002863C SPI_VS_OUT_ID_8
+0x00028640 SPI_VS_OUT_ID_9
+0x00028644 SPI_PS_INPUT_CNTL_0
+0x00028648 SPI_PS_INPUT_CNTL_1
+0x0002864C SPI_PS_INPUT_CNTL_2
+0x00028650 SPI_PS_INPUT_CNTL_3
+0x00028654 SPI_PS_INPUT_CNTL_4
+0x00028658 SPI_PS_INPUT_CNTL_5
+0x0002865C SPI_PS_INPUT_CNTL_6
+0x00028660 SPI_PS_INPUT_CNTL_7
+0x00028664 SPI_PS_INPUT_CNTL_8
+0x00028668 SPI_PS_INPUT_CNTL_9
+0x0002866C SPI_PS_INPUT_CNTL_10
+0x00028670 SPI_PS_INPUT_CNTL_11
+0x00028674 SPI_PS_INPUT_CNTL_12
+0x00028678 SPI_PS_INPUT_CNTL_13
+0x0002867C SPI_PS_INPUT_CNTL_14
+0x00028680 SPI_PS_INPUT_CNTL_15
+0x00028684 SPI_PS_INPUT_CNTL_16
+0x00028688 SPI_PS_INPUT_CNTL_17
+0x0002868C SPI_PS_INPUT_CNTL_18
+0x00028690 SPI_PS_INPUT_CNTL_19
+0x00028694 SPI_PS_INPUT_CNTL_20
+0x00028698 SPI_PS_INPUT_CNTL_21
+0x0002869C SPI_PS_INPUT_CNTL_22
+0x000286A0 SPI_PS_INPUT_CNTL_23
+0x000286A4 SPI_PS_INPUT_CNTL_24
+0x000286A8 SPI_PS_INPUT_CNTL_25
+0x000286AC SPI_PS_INPUT_CNTL_26
+0x000286B0 SPI_PS_INPUT_CNTL_27
+0x000286B4 SPI_PS_INPUT_CNTL_28
+0x000286B8 SPI_PS_INPUT_CNTL_29
+0x000286BC SPI_PS_INPUT_CNTL_30
+0x000286C0 SPI_PS_INPUT_CNTL_31
+0x000286C4 SPI_VS_OUT_CONFIG
+0x000286C8 SPI_THREAD_GROUPING
+0x000286CC SPI_PS_IN_CONTROL_0
+0x000286D0 SPI_PS_IN_CONTROL_1
+0x000286D4 SPI_INTERP_CONTROL_0
+0x000286D8 SPI_INPUT_Z
+0x000286DC SPI_FOG_CNTL
+0x000286E0 SPI_BARYC_CNTL
+0x000286E4 SPI_PS_IN_CONTROL_2
+0x000286E8 SPI_COMPUTE_INPUT_CNTL
+0x000286EC SPI_COMPUTE_NUM_THREAD_X
+0x000286F0 SPI_COMPUTE_NUM_THREAD_Y
+0x000286F4 SPI_COMPUTE_NUM_THREAD_Z
+0x000286F8 GDS_ADDR_SIZE
+0x00028780 CB_BLEND0_CONTROL
+0x00028784 CB_BLEND1_CONTROL
+0x00028788 CB_BLEND2_CONTROL
+0x0002878C CB_BLEND3_CONTROL
+0x00028790 CB_BLEND4_CONTROL
+0x00028794 CB_BLEND5_CONTROL
+0x00028798 CB_BLEND6_CONTROL
+0x0002879C CB_BLEND7_CONTROL
+0x000287CC CS_COPY_STATE
+0x000287D0 GFX_COPY_STATE
+0x000287D4 PA_CL_POINT_X_RAD
+0x000287D8 PA_CL_POINT_Y_RAD
+0x000287DC PA_CL_POINT_SIZE
+0x000287E0 PA_CL_POINT_CULL_RAD
+0x00028808 CB_COLOR_CONTROL
+0x0002880C DB_SHADER_CONTROL
+0x00028810 PA_CL_CLIP_CNTL
+0x00028814 PA_SU_SC_MODE_CNTL
+0x00028818 PA_CL_VTE_CNTL
+0x0002881C PA_CL_VS_OUT_CNTL
+0x00028820 PA_CL_NANINF_CNTL
+0x00028824 PA_SU_LINE_STIPPLE_CNTL
+0x00028828 PA_SU_LINE_STIPPLE_SCALE
+0x0002882C PA_SU_PRIM_FILTER_CNTL
+0x00028838 SQ_DYN_GPR_RESOURCE_LIMIT_1
+0x00028844 SQ_PGM_RESOURCES_PS
+0x00028848 SQ_PGM_RESOURCES_2_PS
+0x0002884C SQ_PGM_EXPORTS_PS
+0x00028860 SQ_PGM_RESOURCES_VS
+0x00028864 SQ_PGM_RESOURCES_2_VS
+0x00028878 SQ_PGM_RESOURCES_GS
+0x0002887C SQ_PGM_RESOURCES_2_GS
+0x00028890 SQ_PGM_RESOURCES_ES
+0x00028894 SQ_PGM_RESOURCES_2_ES
+0x000288A8 SQ_PGM_RESOURCES_FS
+0x000288BC SQ_PGM_RESOURCES_HS
+0x000288C0 SQ_PGM_RESOURCES_2_HS
+0x000288D4 SQ_PGM_RESOURCES_LS
+0x000288D8 SQ_PGM_RESOURCES_2_LS
+0x000288E8 SQ_LDS_ALLOC
+0x000288EC SQ_LDS_ALLOC_PS
+0x000288F0 SQ_VTX_SEMANTIC_CLEAR
+0x00028A00 PA_SU_POINT_SIZE
+0x00028A04 PA_SU_POINT_MINMAX
+0x00028A08 PA_SU_LINE_CNTL
+0x00028A0C PA_SC_LINE_STIPPLE
+0x00028A10 VGT_OUTPUT_PATH_CNTL
+0x00028A14 VGT_HOS_CNTL
+0x00028A18 VGT_HOS_MAX_TESS_LEVEL
+0x00028A1C VGT_HOS_MIN_TESS_LEVEL
+0x00028A20 VGT_HOS_REUSE_DEPTH
+0x00028A24 VGT_GROUP_PRIM_TYPE
+0x00028A28 VGT_GROUP_FIRST_DECR
+0x00028A2C VGT_GROUP_DECR
+0x00028A30 VGT_GROUP_VECT_0_CNTL
+0x00028A34 VGT_GROUP_VECT_1_CNTL
+0x00028A38 VGT_GROUP_VECT_0_FMT_CNTL
+0x00028A3C VGT_GROUP_VECT_1_FMT_CNTL
+0x00028A40 VGT_GS_MODE
+0x00028A48 PA_SC_MODE_CNTL_0
+0x00028A4C PA_SC_MODE_CNTL_1
+0x00028A50 VGT_ENHANCE
+0x00028A54 VGT_GS_PER_ES
+0x00028A58 VGT_ES_PER_GS
+0x00028A5C VGT_GS_PER_VS
+0x00028A6C VGT_GS_OUT_PRIM_TYPE
+0x00028A84 VGT_PRIMITIVEID_EN
+0x00028A94 VGT_MULTI_PRIM_IB_RESET_EN
+0x00028AA0 VGT_INSTANCE_STEP_RATE_0
+0x00028AA4 VGT_INSTANCE_STEP_RATE_1
+0x00028AB4 VGT_REUSE_OFF
+0x00028AB8 VGT_VTX_CNT_EN
+0x00028ABC DB_HTILE_SURFACE
+0x00028AC0 DB_SRESULTS_COMPARE_STATE0
+0x00028AC4 DB_SRESULTS_COMPARE_STATE1
+0x00028AC8 DB_PRELOAD_CONTROL
+0x00028B38 VGT_GS_MAX_VERT_OUT
+0x00028B54 VGT_SHADER_STAGES_EN
+0x00028B58 VGT_LS_HS_CONFIG
+0x00028B5C VGT_LS_SIZE
+0x00028B60 VGT_HS_SIZE
+0x00028B64 VGT_LS_HS_ALLOC
+0x00028B68 VGT_HS_PATCH_CONST
+0x00028B6C VGT_TF_PARAM
+0x00028B70 DB_ALPHA_TO_MASK
+0x00028B74 VGT_DISPATCH_INITIATOR
+0x00028B78 PA_SU_POLY_OFFSET_DB_FMT_CNTL
+0x00028B7C PA_SU_POLY_OFFSET_CLAMP
+0x00028B80 PA_SU_POLY_OFFSET_FRONT_SCALE
+0x00028B84 PA_SU_POLY_OFFSET_FRONT_OFFSET
+0x00028B88 PA_SU_POLY_OFFSET_BACK_SCALE
+0x00028B8C PA_SU_POLY_OFFSET_BACK_OFFSET
+0x00028B74 VGT_GS_INSTANCE_CNT
+0x00028C00 PA_SC_LINE_CNTL
+0x00028C08 PA_SU_VTX_CNTL
+0x00028C0C PA_CL_GB_VERT_CLIP_ADJ
+0x00028C10 PA_CL_GB_VERT_DISC_ADJ
+0x00028C14 PA_CL_GB_HORZ_CLIP_ADJ
+0x00028C18 PA_CL_GB_HORZ_DISC_ADJ
+0x00028C1C PA_SC_AA_SAMPLE_LOCS_0
+0x00028C20 PA_SC_AA_SAMPLE_LOCS_1
+0x00028C24 PA_SC_AA_SAMPLE_LOCS_2
+0x00028C28 PA_SC_AA_SAMPLE_LOCS_3
+0x00028C2C PA_SC_AA_SAMPLE_LOCS_4
+0x00028C30 PA_SC_AA_SAMPLE_LOCS_5
+0x00028C34 PA_SC_AA_SAMPLE_LOCS_6
+0x00028C38 PA_SC_AA_SAMPLE_LOCS_7
+0x00028C3C PA_SC_AA_MASK
+0x00028C8C CB_COLOR0_CLEAR_WORD0
+0x00028C90 CB_COLOR0_CLEAR_WORD1
+0x00028C94 CB_COLOR0_CLEAR_WORD2
+0x00028C98 CB_COLOR0_CLEAR_WORD3
+0x00028CC8 CB_COLOR1_CLEAR_WORD0
+0x00028CCC CB_COLOR1_CLEAR_WORD1
+0x00028CD0 CB_COLOR1_CLEAR_WORD2
+0x00028CD4 CB_COLOR1_CLEAR_WORD3
+0x00028D04 CB_COLOR2_CLEAR_WORD0
+0x00028D08 CB_COLOR2_CLEAR_WORD1
+0x00028D0C CB_COLOR2_CLEAR_WORD2
+0x00028D10 CB_COLOR2_CLEAR_WORD3
+0x00028D40 CB_COLOR3_CLEAR_WORD0
+0x00028D44 CB_COLOR3_CLEAR_WORD1
+0x00028D48 CB_COLOR3_CLEAR_WORD2
+0x00028D4C CB_COLOR3_CLEAR_WORD3
+0x00028D7C CB_COLOR4_CLEAR_WORD0
+0x00028D80 CB_COLOR4_CLEAR_WORD1
+0x00028D84 CB_COLOR4_CLEAR_WORD2
+0x00028D88 CB_COLOR4_CLEAR_WORD3
+0x00028DB8 CB_COLOR5_CLEAR_WORD0
+0x00028DBC CB_COLOR5_CLEAR_WORD1
+0x00028DC0 CB_COLOR5_CLEAR_WORD2
+0x00028DC4 CB_COLOR5_CLEAR_WORD3
+0x00028DF4 CB_COLOR6_CLEAR_WORD0
+0x00028DF8 CB_COLOR6_CLEAR_WORD1
+0x00028DFC CB_COLOR6_CLEAR_WORD2
+0x00028E00 CB_COLOR6_CLEAR_WORD3
+0x00028E30 CB_COLOR7_CLEAR_WORD0
+0x00028E34 CB_COLOR7_CLEAR_WORD1
+0x00028E38 CB_COLOR7_CLEAR_WORD2
+0x00028E3C CB_COLOR7_CLEAR_WORD3
+0x00028F80 SQ_ALU_CONST_BUFFER_SIZE_HS_0
+0x00028F84 SQ_ALU_CONST_BUFFER_SIZE_HS_1
+0x00028F88 SQ_ALU_CONST_BUFFER_SIZE_HS_2
+0x00028F8C SQ_ALU_CONST_BUFFER_SIZE_HS_3
+0x00028F90 SQ_ALU_CONST_BUFFER_SIZE_HS_4
+0x00028F94 SQ_ALU_CONST_BUFFER_SIZE_HS_5
+0x00028F98 SQ_ALU_CONST_BUFFER_SIZE_HS_6
+0x00028F9C SQ_ALU_CONST_BUFFER_SIZE_HS_7
+0x00028FA0 SQ_ALU_CONST_BUFFER_SIZE_HS_8
+0x00028FA4 SQ_ALU_CONST_BUFFER_SIZE_HS_9
+0x00028FA8 SQ_ALU_CONST_BUFFER_SIZE_HS_10
+0x00028FAC SQ_ALU_CONST_BUFFER_SIZE_HS_11
+0x00028FB0 SQ_ALU_CONST_BUFFER_SIZE_HS_12
+0x00028FB4 SQ_ALU_CONST_BUFFER_SIZE_HS_13
+0x00028FB8 SQ_ALU_CONST_BUFFER_SIZE_HS_14
+0x00028FBC SQ_ALU_CONST_BUFFER_SIZE_HS_15
+0x00028FC0 SQ_ALU_CONST_BUFFER_SIZE_LS_0
+0x00028FC4 SQ_ALU_CONST_BUFFER_SIZE_LS_1
+0x00028FC8 SQ_ALU_CONST_BUFFER_SIZE_LS_2
+0x00028FCC SQ_ALU_CONST_BUFFER_SIZE_LS_3
+0x00028FD0 SQ_ALU_CONST_BUFFER_SIZE_LS_4
+0x00028FD4 SQ_ALU_CONST_BUFFER_SIZE_LS_5
+0x00028FD8 SQ_ALU_CONST_BUFFER_SIZE_LS_6
+0x00028FDC SQ_ALU_CONST_BUFFER_SIZE_LS_7
+0x00028FE0 SQ_ALU_CONST_BUFFER_SIZE_LS_8
+0x00028FE4 SQ_ALU_CONST_BUFFER_SIZE_LS_9
+0x00028FE8 SQ_ALU_CONST_BUFFER_SIZE_LS_10
+0x00028FEC SQ_ALU_CONST_BUFFER_SIZE_LS_11
+0x00028FF0 SQ_ALU_CONST_BUFFER_SIZE_LS_12
+0x00028FF4 SQ_ALU_CONST_BUFFER_SIZE_LS_13
+0x00028FF8 SQ_ALU_CONST_BUFFER_SIZE_LS_14
+0x00028FFC SQ_ALU_CONST_BUFFER_SIZE_LS_15
+0x0003CFF0 SQ_VTX_BASE_VTX_LOC
+0x0003CFF4 SQ_VTX_START_INST_LOC
+0x0003FF00 SQ_TEX_SAMPLER_CLEAR
+0x0003FF04 SQ_TEX_RESOURCE_CLEAR
+0x0003FF08 SQ_LOOP_BOOL_CLEAR
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9e4240b3bf0..f454c9a5e7f 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -57,7 +57,9 @@ void rs400_gart_adjust_size(struct radeon_device *rdev)
 	}
 	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
 		/* FIXME: RS400 & RS480 seems to have issue with GART size
-		 * if 4G of system memory (needs more testing) */
+		 * if 4G of system memory (needs more testing)
+		 */
+		/* XXX is this still an issue with proper alignment? */
 		rdev->mc.gtt_size = 32 * 1024 * 1024;
 		DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
 	}
@@ -263,6 +265,7 @@ void rs400_mc_init(struct radeon_device *rdev)
 	r100_vram_init_sizes(rdev);
 	base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 79887cac5b5..6dc15ea8ba3 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -74,7 +74,8 @@ void rs600_pm_misc(struct radeon_device *rdev)
 			if (voltage->delay)
 				udelay(voltage->delay);
 		}
-	}
+	} else if (voltage->type == VOLTAGE_VDDC)
+		radeon_atom_set_voltage(rdev, voltage->vddc_id);
 
 	dyn_pwrmgt_sclk_length = RREG32_PLL(DYN_PWRMGT_SCLK_LENGTH);
 	dyn_pwrmgt_sclk_length &= ~REDUCED_POWER_SCLK_HILEN(0xf);
@@ -697,6 +698,7 @@ void rs600_mc_init(struct radeon_device *rdev)
 	base = G_000004_MC_FB_START(base) << 16;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index bcc33195ebc..ce4ecbe1081 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -79,7 +79,13 @@ void rs690_pm_info(struct radeon_device *rdev)
 			tmp.full = dfixed_const(100);
 			rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info.ulBootUpMemoryClock);
 			rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
-			rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+			if (info->info.usK8MemoryClock)
+				rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+			else if (rdev->clock.default_mclk) {
+				rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+				rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
+			} else
+				rdev->pm.igp_system_mclk.full = dfixed_const(400);
 			rdev->pm.igp_ht_link_clk.full = dfixed_const(le16_to_cpu(info->info.usFSBClock));
 			rdev->pm.igp_ht_link_width.full = dfixed_const(info->info.ucHTLinkWidth);
 			break;
@@ -87,34 +93,31 @@ void rs690_pm_info(struct radeon_device *rdev)
 			tmp.full = dfixed_const(100);
 			rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info_v2.ulBootUpSidePortClock);
 			rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
-			rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+			if (info->info_v2.ulBootUpUMAClock)
+				rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+			else if (rdev->clock.default_mclk)
+				rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+			else
+				rdev->pm.igp_system_mclk.full = dfixed_const(66700);
 			rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
 			rdev->pm.igp_ht_link_clk.full = dfixed_const(info->info_v2.ulHTLinkFreq);
 			rdev->pm.igp_ht_link_clk.full = dfixed_div(rdev->pm.igp_ht_link_clk, tmp);
 			rdev->pm.igp_ht_link_width.full = dfixed_const(le16_to_cpu(info->info_v2.usMinHTLinkWidth));
 			break;
 		default:
-			tmp.full = dfixed_const(100);
 			/* We assume the slower possible clock ie worst case */
-			/* DDR 333Mhz */
-			rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
-			/* FIXME: system clock ? */
-			rdev->pm.igp_system_mclk.full = dfixed_const(100);
-			rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
-			rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+			rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+			rdev->pm.igp_system_mclk.full = dfixed_const(200);
+			rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
 			rdev->pm.igp_ht_link_width.full = dfixed_const(8);
 			DRM_ERROR("No integrated system info for your GPU, using safe default\n");
 			break;
 		}
 	} else {
-		tmp.full = dfixed_const(100);
 		/* We assume the slower possible clock ie worst case */
-		/* DDR 333Mhz */
-		rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
-		/* FIXME: system clock ? */
-		rdev->pm.igp_system_mclk.full = dfixed_const(100);
-		rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
-		rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+		rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+		rdev->pm.igp_system_mclk.full = dfixed_const(200);
+		rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
 		rdev->pm.igp_ht_link_width.full = dfixed_const(8);
 		DRM_ERROR("No integrated system info for your GPU, using safe default\n");
 	}
@@ -159,6 +162,7 @@ void rs690_mc_init(struct radeon_device *rdev)
 	rs690_pm_info(rdev);
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
@@ -228,10 +232,6 @@ void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
 	fixed20_12 a, b, c;
 	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
 	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
-	/* FIXME: detect IGP with sideport memory, i don't think there is any
-	 * such product available
-	 */
-	bool sideport = false;
 
 	if (!crtc->base.enabled) {
 		/* FIXME: wouldn't it better to set priority mark to maximum */
@@ -300,7 +300,7 @@ void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
 
 	/* Maximun bandwidth is the minimun bandwidth of all component */
 	rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
-	if (sideport) {
+	if (rdev->mc.igp_sideport_enabled) {
 		if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
 			rdev->pm.sideport_bandwidth.full)
 			rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7d9a7b0a180..0c9c169a685 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -195,6 +195,7 @@ void rv515_mc_init(struct radeon_device *rdev)
 	rv515_vram_get_type(rdev);
 	r100_vram_init_sizes(rdev);
 	radeon_vram_location(rdev, &rdev->mc, 0);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 253f24aec03..b7fd8206492 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -44,7 +44,18 @@ void rv770_fini(struct radeon_device *rdev);
 
 void rv770_pm_misc(struct radeon_device *rdev)
 {
-
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 /*
@@ -213,7 +224,7 @@ static void rv770_mc_program(struct radeon_device *rdev)
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 0d9a42c2394..ca904799f01 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -40,11 +40,13 @@
 #include <linux/slab.h>
 
 #include <asm/atomic.h>
-#include <asm/agp.h>
 
 #include "ttm/ttm_bo_driver.h"
 #include "ttm/ttm_page_alloc.h"
 
+#ifdef TTM_HAS_AGP
+#include <asm/agp.h>
+#endif
 
 #define NUM_PAGES_TO_ALLOC		(PAGE_SIZE/sizeof(struct page *))
 #define SMALL_ALLOCATION		16
@@ -77,7 +79,7 @@ struct ttm_page_pool {
 /**
  * Limits for the pool. They are handled without locks because only place where
  * they may change is in sysfs store. They won't have immediate effect anyway
- * so forcing serialiazation to access them is pointless.
+ * so forcing serialization to access them is pointless.
  */
 
 struct ttm_pool_opts {
@@ -104,7 +106,6 @@ struct ttm_pool_opts {
 struct ttm_pool_manager {
 	struct kobject		kobj;
 	struct shrinker		mm_shrink;
-	atomic_t		page_alloc_inited;
 	struct ttm_pool_opts	options;
 
 	union {
@@ -142,7 +143,7 @@ static void ttm_pool_kobj_release(struct kobject *kobj)
 {
 	struct ttm_pool_manager *m =
 		container_of(kobj, struct ttm_pool_manager, kobj);
-	(void)m;
+	kfree(m);
 }
 
 static ssize_t ttm_pool_store(struct kobject *kobj,
@@ -165,16 +166,18 @@ static ssize_t ttm_pool_store(struct kobject *kobj,
 		m->options.small = val;
 	else if (attr == &ttm_page_pool_alloc_size) {
 		if (val > NUM_PAGES_TO_ALLOC*8) {
-			printk(KERN_ERR "[ttm] Setting allocation size to %lu "
-					"is not allowed. Recomended size is "
-					"%lu\n",
-					NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 7),
-					NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
+			printk(KERN_ERR TTM_PFX
+			       "Setting allocation size to %lu "
+			       "is not allowed. Recommended size is "
+			       "%lu\n",
+			       NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 7),
+			       NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
 			return size;
 		} else if (val > NUM_PAGES_TO_ALLOC) {
-			printk(KERN_WARNING "[ttm] Setting allocation size to "
-					"larger than %lu is not recomended.\n",
-					NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
+			printk(KERN_WARNING TTM_PFX
+			       "Setting allocation size to "
+			       "larger than %lu is not recommended.\n",
+			       NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
 		}
 		m->options.alloc_size = val;
 	}
@@ -212,9 +215,7 @@ static struct kobj_type ttm_pool_kobj_type = {
 	.default_attrs = ttm_pool_attrs,
 };
 
-static struct ttm_pool_manager _manager = {
-	.page_alloc_inited	= ATOMIC_INIT(0)
-};
+static struct ttm_pool_manager *_manager;
 
 #ifndef CONFIG_X86
 static int set_pages_array_wb(struct page **pages, int addrinarray)
@@ -269,7 +270,7 @@ static struct ttm_page_pool *ttm_get_pool(int flags,
 	if (flags & TTM_PAGE_FLAG_DMA32)
 		pool_index |= 0x2;
 
-	return &_manager.pools[pool_index];
+	return &_manager->pools[pool_index];
 }
 
 /* set memory back to wb and free the pages. */
@@ -277,7 +278,7 @@ static void ttm_pages_put(struct page *pages[], unsigned npages)
 {
 	unsigned i;
 	if (set_pages_array_wb(pages, npages))
-		printk(KERN_ERR "[ttm] Failed to set %d pages to wb!\n",
+		printk(KERN_ERR TTM_PFX "Failed to set %d pages to wb!\n",
 				npages);
 	for (i = 0; i < npages; ++i)
 		__free_page(pages[i]);
@@ -313,7 +314,8 @@ static int ttm_page_pool_free(struct ttm_page_pool *pool, unsigned nr_free)
 	pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
 			GFP_KERNEL);
 	if (!pages_to_free) {
-		printk(KERN_ERR "Failed to allocate memory for pool free operation.\n");
+		printk(KERN_ERR TTM_PFX
+		       "Failed to allocate memory for pool free operation.\n");
 		return 0;
 	}
 
@@ -384,15 +386,15 @@ static int ttm_pool_get_num_unused_pages(void)
 	unsigned i;
 	int total = 0;
 	for (i = 0; i < NUM_POOLS; ++i)
-		total += _manager.pools[i].npages;
+		total += _manager->pools[i].npages;
 
 	return total;
 }
 
 /**
- * Calback for mm to request pool to reduce number of page held.
+ * Callback for mm to request pool to reduce number of page held.
  */
-static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
+static int ttm_pool_mm_shrink(struct shrinker *shrink, int shrink_pages, gfp_t gfp_mask)
 {
 	static atomic_t start_pool = ATOMIC_INIT(0);
 	unsigned i;
@@ -405,7 +407,7 @@ static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
 		unsigned nr_free = shrink_pages;
 		if (shrink_pages == 0)
 			break;
-		pool = &_manager.pools[(i + pool_offset)%NUM_POOLS];
+		pool = &_manager->pools[(i + pool_offset)%NUM_POOLS];
 		shrink_pages = ttm_page_pool_free(pool, nr_free);
 	}
 	/* return estimated number of unused pages in pool */
@@ -433,14 +435,16 @@ static int ttm_set_pages_caching(struct page **pages,
 	case tt_uncached:
 		r = set_pages_array_uc(pages, cpages);
 		if (r)
-			printk(KERN_ERR "[ttm] Failed to set %d pages to uc!\n",
-					cpages);
+			printk(KERN_ERR TTM_PFX
+			       "Failed to set %d pages to uc!\n",
+			       cpages);
 		break;
 	case tt_wc:
 		r = set_pages_array_wc(pages, cpages);
 		if (r)
-			printk(KERN_ERR "[ttm] Failed to set %d pages to wc!\n",
-					cpages);
+			printk(KERN_ERR TTM_PFX
+			       "Failed to set %d pages to wc!\n",
+			       cpages);
 		break;
 	default:
 		break;
@@ -458,7 +462,7 @@ static void ttm_handle_caching_state_failure(struct list_head *pages,
 		struct page **failed_pages, unsigned cpages)
 {
 	unsigned i;
-	/* Failed pages has to be reed */
+	/* Failed pages have to be freed */
 	for (i = 0; i < cpages; ++i) {
 		list_del(&failed_pages[i]->lru);
 		__free_page(failed_pages[i]);
@@ -485,7 +489,8 @@ static int ttm_alloc_new_pages(struct list_head *pages, int gfp_flags,
 	caching_array = kmalloc(max_cpages*sizeof(struct page *), GFP_KERNEL);
 
 	if (!caching_array) {
-		printk(KERN_ERR "[ttm] unable to allocate table for new pages.");
+		printk(KERN_ERR TTM_PFX
+		       "Unable to allocate table for new pages.");
 		return -ENOMEM;
 	}
 
@@ -493,12 +498,13 @@ static int ttm_alloc_new_pages(struct list_head *pages, int gfp_flags,
 		p = alloc_page(gfp_flags);
 
 		if (!p) {
-			printk(KERN_ERR "[ttm] unable to get page %u\n", i);
+			printk(KERN_ERR TTM_PFX "Unable to get page %u.\n", i);
 
 			/* store already allocated pages in the pool after
 			 * setting the caching state */
 			if (cpages) {
-				r = ttm_set_pages_caching(caching_array, cstate, cpages);
+				r = ttm_set_pages_caching(caching_array,
+							  cstate, cpages);
 				if (r)
 					ttm_handle_caching_state_failure(pages,
 						ttm_flags, cstate,
@@ -569,10 +575,10 @@ static void ttm_page_pool_fill_locked(struct ttm_page_pool *pool,
 
 	/* If allocation request is small and there is not enough
 	 * pages in pool we fill the pool first */
-	if (count < _manager.options.small
+	if (count < _manager->options.small
 		&& count > pool->npages) {
 		struct list_head new_pages;
-		unsigned alloc_size = _manager.options.alloc_size;
+		unsigned alloc_size = _manager->options.alloc_size;
 
 		/**
 		 * Can't change page caching if in irqsave context. We have to
@@ -590,7 +596,8 @@ static void ttm_page_pool_fill_locked(struct ttm_page_pool *pool,
 			++pool->nrefills;
 			pool->npages += alloc_size;
 		} else {
-			printk(KERN_ERR "[ttm] Failed to fill pool (%p).", pool);
+			printk(KERN_ERR TTM_PFX
+			       "Failed to fill pool (%p).", pool);
 			/* If we have any pages left put them to the pool. */
 			list_for_each_entry(p, &pool->list, lru) {
 				++cpages;
@@ -659,7 +666,7 @@ int ttm_get_pages(struct list_head *pages, int flags,
 {
 	struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
 	struct page *p = NULL;
-	int gfp_flags = 0;
+	int gfp_flags = GFP_USER;
 	int r;
 
 	/* set zero flag for page allocation if required */
@@ -671,13 +678,14 @@ int ttm_get_pages(struct list_head *pages, int flags,
 		if (flags & TTM_PAGE_FLAG_DMA32)
 			gfp_flags |= GFP_DMA32;
 		else
-			gfp_flags |= __GFP_HIGHMEM;
+			gfp_flags |= GFP_HIGHUSER;
 
 		for (r = 0; r < count; ++r) {
 			p = alloc_page(gfp_flags);
 			if (!p) {
 
-				printk(KERN_ERR "[ttm] unable to allocate page.");
+				printk(KERN_ERR TTM_PFX
+				       "Unable to allocate page.");
 				return -ENOMEM;
 			}
 
@@ -709,8 +717,9 @@ int ttm_get_pages(struct list_head *pages, int flags,
 		if (r) {
 			/* If there is any pages in the list put them back to
 			 * the pool. */
-			printk(KERN_ERR "[ttm] Failed to allocate extra pages "
-					"for large request.");
+			printk(KERN_ERR TTM_PFX
+			       "Failed to allocate extra pages "
+			       "for large request.");
 			ttm_put_pages(pages, 0, flags, cstate);
 			return r;
 		}
@@ -749,8 +758,8 @@ void ttm_put_pages(struct list_head *pages, unsigned page_count, int flags,
 	pool->npages += page_count;
 	/* Check that we don't go over the pool limit */
 	page_count = 0;
-	if (pool->npages > _manager.options.max_size) {
-		page_count = pool->npages - _manager.options.max_size;
+	if (pool->npages > _manager->options.max_size) {
+		page_count = pool->npages - _manager->options.max_size;
 		/* free at least NUM_PAGES_TO_ALLOC number of pages
 		 * to reduce calls to set_memory_wb */
 		if (page_count < NUM_PAGES_TO_ALLOC)
@@ -775,33 +784,36 @@ static void ttm_page_pool_init_locked(struct ttm_page_pool *pool, int flags,
 int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages)
 {
 	int ret;
-	if (atomic_add_return(1, &_manager.page_alloc_inited) > 1)
-		return 0;
 
-	printk(KERN_INFO "[ttm] Initializing pool allocator.\n");
+	WARN_ON(_manager);
+
+	printk(KERN_INFO TTM_PFX "Initializing pool allocator.\n");
+
+	_manager = kzalloc(sizeof(*_manager), GFP_KERNEL);
 
-	ttm_page_pool_init_locked(&_manager.wc_pool, GFP_HIGHUSER, "wc");
+	ttm_page_pool_init_locked(&_manager->wc_pool, GFP_HIGHUSER, "wc");
 
-	ttm_page_pool_init_locked(&_manager.uc_pool, GFP_HIGHUSER, "uc");
+	ttm_page_pool_init_locked(&_manager->uc_pool, GFP_HIGHUSER, "uc");
 
-	ttm_page_pool_init_locked(&_manager.wc_pool_dma32, GFP_USER | GFP_DMA32,
-			"wc dma");
+	ttm_page_pool_init_locked(&_manager->wc_pool_dma32,
+				  GFP_USER | GFP_DMA32, "wc dma");
 
-	ttm_page_pool_init_locked(&_manager.uc_pool_dma32, GFP_USER | GFP_DMA32,
-			"uc dma");
+	ttm_page_pool_init_locked(&_manager->uc_pool_dma32,
+				  GFP_USER | GFP_DMA32, "uc dma");
 
-	_manager.options.max_size = max_pages;
-	_manager.options.small = SMALL_ALLOCATION;
-	_manager.options.alloc_size = NUM_PAGES_TO_ALLOC;
+	_manager->options.max_size = max_pages;
+	_manager->options.small = SMALL_ALLOCATION;
+	_manager->options.alloc_size = NUM_PAGES_TO_ALLOC;
 
-	kobject_init(&_manager.kobj, &ttm_pool_kobj_type);
-	ret = kobject_add(&_manager.kobj, &glob->kobj, "pool");
+	ret = kobject_init_and_add(&_manager->kobj, &ttm_pool_kobj_type,
+				   &glob->kobj, "pool");
 	if (unlikely(ret != 0)) {
-		kobject_put(&_manager.kobj);
+		kobject_put(&_manager->kobj);
+		_manager = NULL;
 		return ret;
 	}
 
-	ttm_pool_mm_shrink_init(&_manager);
+	ttm_pool_mm_shrink_init(_manager);
 
 	return 0;
 }
@@ -810,16 +822,14 @@ void ttm_page_alloc_fini()
 {
 	int i;
 
-	if (atomic_sub_return(1, &_manager.page_alloc_inited) > 0)
-		return;
-
-	printk(KERN_INFO "[ttm] Finilizing pool allocator.\n");
-	ttm_pool_mm_shrink_fini(&_manager);
+	printk(KERN_INFO TTM_PFX "Finalizing pool allocator.\n");
+	ttm_pool_mm_shrink_fini(_manager);
 
 	for (i = 0; i < NUM_POOLS; ++i)
-		ttm_page_pool_free(&_manager.pools[i], FREE_ALL_PAGES);
+		ttm_page_pool_free(&_manager->pools[i], FREE_ALL_PAGES);
 
-	kobject_put(&_manager.kobj);
+	kobject_put(&_manager->kobj);
+	_manager = NULL;
 }
 
 int ttm_page_alloc_debugfs(struct seq_file *m, void *data)
@@ -827,14 +837,14 @@ int ttm_page_alloc_debugfs(struct seq_file *m, void *data)
 	struct ttm_page_pool *p;
 	unsigned i;
 	char *h[] = {"pool", "refills", "pages freed", "size"};
-	if (atomic_read(&_manager.page_alloc_inited) == 0) {
+	if (!_manager) {
 		seq_printf(m, "No pool allocator running.\n");
 		return 0;
 	}
 	seq_printf(m, "%6s %12s %13s %8s\n",
 			h[0], h[1], h[2], h[3]);
 	for (i = 0; i < NUM_POOLS; ++i) {
-		p = &_manager.pools[i];
+		p = &_manager->pools[i];
 
 		seq_printf(m, "%6s %12ld %13ld %8d\n",
 				p->name, p->nrefills,
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile
index 1a3cb6816d1..4505e17df3f 100644
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -4,6 +4,6 @@ ccflags-y := -Iinclude/drm
 vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \
 	    vmwgfx_fb.o vmwgfx_ioctl.o vmwgfx_resource.o vmwgfx_buffer.o \
 	    vmwgfx_fifo.o vmwgfx_irq.o vmwgfx_ldu.o vmwgfx_ttm_glue.o \
-	    vmwgfx_overlay.o
+	    vmwgfx_overlay.o vmwgfx_fence.o
 
 obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 0c9c0811f42..b793c8c9acb 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -88,6 +88,9 @@
 #define DRM_IOCTL_VMW_FENCE_WAIT				\
 	DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_FENCE_WAIT,		\
 		 struct drm_vmw_fence_wait_arg)
+#define DRM_IOCTL_VMW_UPDATE_LAYOUT				\
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_UPDATE_LAYOUT,	\
+		 struct drm_vmw_update_layout_arg)
 
 
 /**
@@ -135,7 +138,9 @@ static struct drm_ioctl_desc vmw_ioctls[] = {
 	VMW_IOCTL_DEF(DRM_IOCTL_VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl,
 		      DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED),
 	VMW_IOCTL_DEF(DRM_IOCTL_VMW_FENCE_WAIT, vmw_fence_wait_ioctl,
-		      DRM_AUTH | DRM_UNLOCKED)
+		      DRM_AUTH | DRM_UNLOCKED),
+	VMW_IOCTL_DEF(DRM_IOCTL_VMW_UPDATE_LAYOUT, vmw_kms_update_layout_ioctl,
+		      DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED)
 };
 
 static struct pci_device_id vmw_pci_id_list[] = {
@@ -318,6 +323,15 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 		goto out_err3;
 	}
 
+	/* Need mmio memory to check for fifo pitchlock cap. */
+	if (!(dev_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) &&
+	    !(dev_priv->capabilities & SVGA_CAP_PITCHLOCK) &&
+	    !vmw_fifo_have_pitchlock(dev_priv)) {
+		ret = -ENOSYS;
+		DRM_ERROR("Hardware has no pitchlock\n");
+		goto out_err4;
+	}
+
 	dev_priv->tdev = ttm_object_device_init
 	    (dev_priv->mem_global_ref.object, 12);
 
@@ -399,8 +413,6 @@ static int vmw_driver_unload(struct drm_device *dev)
 {
 	struct vmw_private *dev_priv = vmw_priv(dev);
 
-	DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n");
-
 	unregister_pm_notifier(&dev_priv->pm_nb);
 
 	vmw_fb_close(dev_priv);
@@ -546,7 +558,6 @@ static int vmw_master_create(struct drm_device *dev,
 {
 	struct vmw_master *vmaster;
 
-	DRM_INFO("Master create.\n");
 	vmaster = kzalloc(sizeof(*vmaster), GFP_KERNEL);
 	if (unlikely(vmaster == NULL))
 		return -ENOMEM;
@@ -563,7 +574,6 @@ static void vmw_master_destroy(struct drm_device *dev,
 {
 	struct vmw_master *vmaster = vmw_master(master);
 
-	DRM_INFO("Master destroy.\n");
 	master->driver_priv = NULL;
 	kfree(vmaster);
 }
@@ -579,8 +589,6 @@ static int vmw_master_set(struct drm_device *dev,
 	struct vmw_master *vmaster = vmw_master(file_priv->master);
 	int ret = 0;
 
-	DRM_INFO("Master set.\n");
-
 	if (active) {
 		BUG_ON(active != &dev_priv->fbdev_master);
 		ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile);
@@ -622,8 +630,6 @@ static void vmw_master_drop(struct drm_device *dev,
 	struct vmw_master *vmaster = vmw_master(file_priv->master);
 	int ret;
 
-	DRM_INFO("Master drop.\n");
-
 	/**
 	 * Make sure the master doesn't disappear while we have
 	 * it locked.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 356dc935ec1..eaad5209533 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -41,12 +41,13 @@
 
 #define VMWGFX_DRIVER_DATE "20100209"
 #define VMWGFX_DRIVER_MAJOR 1
-#define VMWGFX_DRIVER_MINOR 0
+#define VMWGFX_DRIVER_MINOR 2
 #define VMWGFX_DRIVER_PATCHLEVEL 0
 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000
 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
 #define VMWGFX_MAX_RELOCATIONS 2048
 #define VMWGFX_MAX_GMRS 2048
+#define VMWGFX_MAX_DISPLAYS 16
 
 struct vmw_fpriv {
 	struct drm_master *locked_master;
@@ -102,6 +103,13 @@ struct vmw_surface {
 	struct vmw_cursor_snooper snooper;
 };
 
+struct vmw_fence_queue {
+	struct list_head head;
+	struct timespec lag;
+	struct timespec lag_time;
+	spinlock_t lock;
+};
+
 struct vmw_fifo_state {
 	unsigned long reserved_size;
 	__le32 *dynamic_buffer;
@@ -115,6 +123,7 @@ struct vmw_fifo_state {
 	uint32_t capabilities;
 	struct mutex fifo_mutex;
 	struct rw_semaphore rwsem;
+	struct vmw_fence_queue fence_queue;
 };
 
 struct vmw_relocation {
@@ -144,6 +153,14 @@ struct vmw_master {
 	struct ttm_lock lock;
 };
 
+struct vmw_vga_topology_state {
+	uint32_t width;
+	uint32_t height;
+	uint32_t primary;
+	uint32_t pos_x;
+	uint32_t pos_y;
+};
+
 struct vmw_private {
 	struct ttm_bo_device bdev;
 	struct ttm_bo_global_ref bo_global_ref;
@@ -171,14 +188,19 @@ struct vmw_private {
 	 * VGA registers.
 	 */
 
+	struct vmw_vga_topology_state vga_save[VMWGFX_MAX_DISPLAYS];
 	uint32_t vga_width;
 	uint32_t vga_height;
 	uint32_t vga_depth;
 	uint32_t vga_bpp;
 	uint32_t vga_pseudo;
 	uint32_t vga_red_mask;
-	uint32_t vga_blue_mask;
 	uint32_t vga_green_mask;
+	uint32_t vga_blue_mask;
+	uint32_t vga_bpl;
+	uint32_t vga_pitchlock;
+
+	uint32_t num_displays;
 
 	/*
 	 * Framebuffer info.
@@ -393,6 +415,7 @@ extern int vmw_fifo_send_fence(struct vmw_private *dev_priv,
 extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason);
 extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma);
 extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv);
+extern bool vmw_fifo_have_pitchlock(struct vmw_private *dev_priv);
 
 /**
  * TTM glue - vmwgfx_ttm_glue.c
@@ -441,6 +464,23 @@ extern int vmw_fallback_wait(struct vmw_private *dev_priv,
 			     uint32_t sequence,
 			     bool interruptible,
 			     unsigned long timeout);
+extern void vmw_update_sequence(struct vmw_private *dev_priv,
+				struct vmw_fifo_state *fifo_state);
+
+
+/**
+ * Rudimentary fence objects currently used only for throttling -
+ * vmwgfx_fence.c
+ */
+
+extern void vmw_fence_queue_init(struct vmw_fence_queue *queue);
+extern void vmw_fence_queue_takedown(struct vmw_fence_queue *queue);
+extern int vmw_fence_push(struct vmw_fence_queue *queue,
+			  uint32_t sequence);
+extern int vmw_fence_pull(struct vmw_fence_queue *queue,
+			  uint32_t signaled_sequence);
+extern int vmw_wait_lag(struct vmw_private *dev_priv,
+			struct vmw_fence_queue *queue, uint32_t us);
 
 /**
  * Kernel framebuffer - vmwgfx_fb.c
@@ -466,6 +506,11 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf,
 			  struct ttm_object_file *tfile,
 			  struct ttm_buffer_object *bo,
 			  SVGA3dCmdHeader *header);
+void vmw_kms_write_svga(struct vmw_private *vmw_priv,
+			unsigned width, unsigned height, unsigned pitch,
+			unsigned bbp, unsigned depth);
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
 
 /**
  * Overlay control - vmwgfx_overlay.c
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index dbd36b8910c..8e396850513 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -644,6 +644,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
 	ret = copy_from_user(cmd, user_cmd, arg->command_size);
 
 	if (unlikely(ret != 0)) {
+		ret = -EFAULT;
 		DRM_ERROR("Failed copying commands.\n");
 		goto out_commit;
 	}
@@ -669,6 +670,15 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
 		goto out_err;
 
 	vmw_apply_relocations(sw_context);
+
+	if (arg->throttle_us) {
+		ret = vmw_wait_lag(dev_priv, &dev_priv->fifo.fence_queue,
+				   arg->throttle_us);
+
+		if (unlikely(ret != 0))
+			goto out_err;
+	}
+
 	vmw_fifo_commit(dev_priv, arg->command_size);
 
 	ret = vmw_fifo_send_fence(dev_priv, &sequence);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 7421aaad8d0..b0866f04ec7 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -132,16 +132,14 @@ static int vmw_fb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	/* without multimon its hard to resize */
-	if (!(vmw_priv->capabilities & SVGA_CAP_MULTIMON) &&
-	    (var->xres != par->max_width ||
-	     var->yres != par->max_height)) {
-		DRM_ERROR("Tried to resize, but we don't have multimon\n");
+	if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) &&
+	    (var->xoffset != 0 || var->yoffset != 0)) {
+		DRM_ERROR("Can not handle panning without display topology\n");
 		return -EINVAL;
 	}
 
-	if (var->xres > par->max_width ||
-	    var->yres > par->max_height) {
+	if ((var->xoffset + var->xres) > par->max_width ||
+	    (var->yoffset + var->yres) > par->max_height) {
 		DRM_ERROR("Requested geom can not fit in framebuffer\n");
 		return -EINVAL;
 	}
@@ -154,27 +152,11 @@ static int vmw_fb_set_par(struct fb_info *info)
 	struct vmw_fb_par *par = info->par;
 	struct vmw_private *vmw_priv = par->vmw_priv;
 
-	if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
-		vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-
-		vmw_write(vmw_priv, SVGA_REG_ENABLE, 1);
-		vmw_write(vmw_priv, SVGA_REG_WIDTH, par->max_width);
-		vmw_write(vmw_priv, SVGA_REG_HEIGHT, par->max_height);
-		vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, par->bpp);
-		vmw_write(vmw_priv, SVGA_REG_DEPTH, par->depth);
-		vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
-		vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
-		vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
-
+	vmw_kms_write_svga(vmw_priv, info->var.xres, info->var.yres,
+			   info->fix.line_length,
+			   par->bpp, par->depth);
+	if (vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) {
 		/* TODO check if pitch and offset changes */
-
 		vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
@@ -183,13 +165,13 @@ static int vmw_fb_set_par(struct fb_info *info)
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, info->var.xres);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, info->var.yres);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-	} else {
-		vmw_write(vmw_priv, SVGA_REG_WIDTH, info->var.xres);
-		vmw_write(vmw_priv, SVGA_REG_HEIGHT, info->var.yres);
-
-		/* TODO check if pitch and offset changes */
 	}
 
+	/* This is really helpful since if this fails the user
+	 * can probably not see anything on the screen.
+	 */
+	WARN_ON(vmw_read(vmw_priv, SVGA_REG_FB_OFFSET) != 0);
+
 	return 0;
 }
 
@@ -416,48 +398,23 @@ int vmw_fb_init(struct vmw_private *vmw_priv)
 	unsigned fb_bbp, fb_depth, fb_offset, fb_pitch, fb_size;
 	int ret;
 
+	/* XXX These shouldn't be hardcoded. */
 	initial_width = 800;
 	initial_height = 600;
 
 	fb_bbp = 32;
 	fb_depth = 24;
 
-	if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
-		fb_width = min(vmw_priv->fb_max_width, (unsigned)2048);
-		fb_height = min(vmw_priv->fb_max_height, (unsigned)2048);
-	} else {
-		fb_width = min(vmw_priv->fb_max_width, initial_width);
-		fb_height = min(vmw_priv->fb_max_height, initial_height);
-	}
+	/* XXX As shouldn't these be as well. */
+	fb_width = min(vmw_priv->fb_max_width, (unsigned)2048);
+	fb_height = min(vmw_priv->fb_max_height, (unsigned)2048);
 
 	initial_width = min(fb_width, initial_width);
 	initial_height = min(fb_height, initial_height);
 
-	vmw_write(vmw_priv, SVGA_REG_WIDTH, fb_width);
-	vmw_write(vmw_priv, SVGA_REG_HEIGHT, fb_height);
-	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, fb_bbp);
-	vmw_write(vmw_priv, SVGA_REG_DEPTH, fb_depth);
-	vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
-	vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
-	vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
-
-	fb_size = vmw_read(vmw_priv, SVGA_REG_FB_SIZE);
+	fb_pitch = fb_width * fb_bbp / 8;
+	fb_size = fb_pitch * fb_height;
 	fb_offset = vmw_read(vmw_priv, SVGA_REG_FB_OFFSET);
-	fb_pitch = vmw_read(vmw_priv, SVGA_REG_BYTES_PER_LINE);
-
-	DRM_DEBUG("width  %u\n", vmw_read(vmw_priv, SVGA_REG_MAX_WIDTH));
-	DRM_DEBUG("height %u\n", vmw_read(vmw_priv, SVGA_REG_MAX_HEIGHT));
-	DRM_DEBUG("width  %u\n", vmw_read(vmw_priv, SVGA_REG_WIDTH));
-	DRM_DEBUG("height %u\n", vmw_read(vmw_priv, SVGA_REG_HEIGHT));
-	DRM_DEBUG("bpp    %u\n", vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL));
-	DRM_DEBUG("depth  %u\n", vmw_read(vmw_priv, SVGA_REG_DEPTH));
-	DRM_DEBUG("bpl    %u\n", vmw_read(vmw_priv, SVGA_REG_BYTES_PER_LINE));
-	DRM_DEBUG("r mask %08x\n", vmw_read(vmw_priv, SVGA_REG_RED_MASK));
-	DRM_DEBUG("g mask %08x\n", vmw_read(vmw_priv, SVGA_REG_GREEN_MASK));
-	DRM_DEBUG("b mask %08x\n", vmw_read(vmw_priv, SVGA_REG_BLUE_MASK));
-	DRM_DEBUG("fb_offset 0x%08x\n", fb_offset);
-	DRM_DEBUG("fb_pitch  %u\n", fb_pitch);
-	DRM_DEBUG("fb_size   %u kiB\n", fb_size / 1024);
 
 	info = framebuffer_alloc(sizeof(*par), device);
 	if (!info)
@@ -659,6 +616,10 @@ int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,
 		goto err_unlock;
 
 	ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
+
+	/* Could probably bug on */
+	WARN_ON(bo->offset != 0);
+
 	ttm_bo_unreserve(bo);
 err_unlock:
 	ttm_write_unlock(&vmw_priv->active_master->lock);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
new file mode 100644
index 00000000000..61eacc1b5ca
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -0,0 +1,173 @@
+/**************************************************************************
+ *
+ * Copyright (C) 2010 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+
+#include "vmwgfx_drv.h"
+
+struct vmw_fence {
+	struct list_head head;
+	uint32_t sequence;
+	struct timespec submitted;
+};
+
+void vmw_fence_queue_init(struct vmw_fence_queue *queue)
+{
+	INIT_LIST_HEAD(&queue->head);
+	queue->lag = ns_to_timespec(0);
+	getrawmonotonic(&queue->lag_time);
+	spin_lock_init(&queue->lock);
+}
+
+void vmw_fence_queue_takedown(struct vmw_fence_queue *queue)
+{
+	struct vmw_fence *fence, *next;
+
+	spin_lock(&queue->lock);
+	list_for_each_entry_safe(fence, next, &queue->head, head) {
+		kfree(fence);
+	}
+	spin_unlock(&queue->lock);
+}
+
+int vmw_fence_push(struct vmw_fence_queue *queue,
+		   uint32_t sequence)
+{
+	struct vmw_fence *fence = kmalloc(sizeof(*fence), GFP_KERNEL);
+
+	if (unlikely(!fence))
+		return -ENOMEM;
+
+	fence->sequence = sequence;
+	getrawmonotonic(&fence->submitted);
+	spin_lock(&queue->lock);
+	list_add_tail(&fence->head, &queue->head);
+	spin_unlock(&queue->lock);
+
+	return 0;
+}
+
+int vmw_fence_pull(struct vmw_fence_queue *queue,
+		   uint32_t signaled_sequence)
+{
+	struct vmw_fence *fence, *next;
+	struct timespec now;
+	bool updated = false;
+
+	spin_lock(&queue->lock);
+	getrawmonotonic(&now);
+
+	if (list_empty(&queue->head)) {
+		queue->lag = ns_to_timespec(0);
+		queue->lag_time = now;
+		updated = true;
+		goto out_unlock;
+	}
+
+	list_for_each_entry_safe(fence, next, &queue->head, head) {
+		if (signaled_sequence - fence->sequence > (1 << 30))
+			continue;
+
+		queue->lag = timespec_sub(now, fence->submitted);
+		queue->lag_time = now;
+		updated = true;
+		list_del(&fence->head);
+		kfree(fence);
+	}
+
+out_unlock:
+	spin_unlock(&queue->lock);
+
+	return (updated) ? 0 : -EBUSY;
+}
+
+static struct timespec vmw_timespec_add(struct timespec t1,
+					struct timespec t2)
+{
+	t1.tv_sec += t2.tv_sec;
+	t1.tv_nsec += t2.tv_nsec;
+	if (t1.tv_nsec >= 1000000000L) {
+		t1.tv_sec += 1;
+		t1.tv_nsec -= 1000000000L;
+	}
+
+	return t1;
+}
+
+static struct timespec vmw_fifo_lag(struct vmw_fence_queue *queue)
+{
+	struct timespec now;
+
+	spin_lock(&queue->lock);
+	getrawmonotonic(&now);
+	queue->lag = vmw_timespec_add(queue->lag,
+				      timespec_sub(now, queue->lag_time));
+	queue->lag_time = now;
+	spin_unlock(&queue->lock);
+	return queue->lag;
+}
+
+
+static bool vmw_lag_lt(struct vmw_fence_queue *queue,
+		       uint32_t us)
+{
+	struct timespec lag, cond;
+
+	cond = ns_to_timespec((s64) us * 1000);
+	lag = vmw_fifo_lag(queue);
+	return (timespec_compare(&lag, &cond) < 1);
+}
+
+int vmw_wait_lag(struct vmw_private *dev_priv,
+		 struct vmw_fence_queue *queue, uint32_t us)
+{
+	struct vmw_fence *fence;
+	uint32_t sequence;
+	int ret;
+
+	while (!vmw_lag_lt(queue, us)) {
+		spin_lock(&queue->lock);
+		if (list_empty(&queue->head))
+			sequence = atomic_read(&dev_priv->fence_seq);
+		else {
+			fence = list_first_entry(&queue->head,
+						 struct vmw_fence, head);
+			sequence = fence->sequence;
+		}
+		spin_unlock(&queue->lock);
+
+		ret = vmw_wait_fence(dev_priv, false, sequence, true,
+				     3*HZ);
+
+		if (unlikely(ret != 0))
+			return ret;
+
+		(void) vmw_fence_pull(queue, sequence);
+	}
+	return 0;
+}
+
+
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 39d43a01d84..e6a1eb7ea95 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -34,6 +34,9 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
 	uint32_t fifo_min, hwversion;
 
+	if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
+		return false;
+
 	fifo_min = ioread32(fifo_mem  + SVGA_FIFO_MIN);
 	if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
 		return false;
@@ -48,6 +51,21 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 	return true;
 }
 
+bool vmw_fifo_have_pitchlock(struct vmw_private *dev_priv)
+{
+	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+	uint32_t caps;
+
+	if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
+		return false;
+
+	caps = ioread32(fifo_mem + SVGA_FIFO_CAPABILITIES);
+	if (caps & SVGA_FIFO_CAP_PITCHLOCK)
+		return true;
+
+	return false;
+}
+
 int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 {
 	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
@@ -120,7 +138,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 
 	atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence);
 	iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
-
+	vmw_fence_queue_init(&fifo->fence_queue);
 	return vmw_fifo_send_fence(dev_priv, &dummy);
 out_err:
 	vfree(fifo->static_buffer);
@@ -159,6 +177,7 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 		  dev_priv->enable_state);
 
 	mutex_unlock(&dev_priv->hw_mutex);
+	vmw_fence_queue_takedown(&fifo->fence_queue);
 
 	if (likely(fifo->last_buffer != NULL)) {
 		vfree(fifo->last_buffer);
@@ -484,6 +503,8 @@ int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence)
 	fifo_state->last_buffer_add = true;
 	vmw_fifo_commit(dev_priv, bytes);
 	fifo_state->last_buffer_add = false;
+	(void) vmw_fence_push(&fifo_state->fence_queue, *sequence);
+	vmw_update_sequence(dev_priv, fifo_state);
 
 out_err:
 	return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
index 4d7cb539386..e92298a6a38 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
@@ -64,22 +64,33 @@ static bool vmw_fifo_idle(struct vmw_private *dev_priv, uint32_t sequence)
 	return (busy == 0);
 }
 
+void vmw_update_sequence(struct vmw_private *dev_priv,
+			 struct vmw_fifo_state *fifo_state)
+{
+	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+
+	uint32_t sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+
+	if (dev_priv->last_read_sequence != sequence) {
+		dev_priv->last_read_sequence = sequence;
+		vmw_fence_pull(&fifo_state->fence_queue, sequence);
+	}
+}
 
 bool vmw_fence_signaled(struct vmw_private *dev_priv,
 			uint32_t sequence)
 {
-	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
 	struct vmw_fifo_state *fifo_state;
 	bool ret;
 
 	if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
 		return true;
 
-	dev_priv->last_read_sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+	fifo_state = &dev_priv->fifo;
+	vmw_update_sequence(dev_priv, fifo_state);
 	if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
 		return true;
 
-	fifo_state = &dev_priv->fifo;
 	if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE) &&
 	    vmw_fifo_idle(dev_priv, sequence))
 		return true;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index bbc7c4c30bc..437ac786277 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -30,6 +30,8 @@
 /* Might need a hrtimer here? */
 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
 
+static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb);
+static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb);
 
 void vmw_display_unit_cleanup(struct vmw_display_unit *du)
 {
@@ -326,6 +328,7 @@ int vmw_framebuffer_create_handle(struct drm_framebuffer *fb,
 struct vmw_framebuffer_surface {
 	struct vmw_framebuffer base;
 	struct vmw_surface *surface;
+	struct vmw_dma_buffer *buffer;
 	struct delayed_work d_work;
 	struct mutex work_lock;
 	bool present_fs;
@@ -500,8 +503,8 @@ int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
 	vfbs->base.base.depth = 24;
 	vfbs->base.base.width = width;
 	vfbs->base.base.height = height;
-	vfbs->base.pin = NULL;
-	vfbs->base.unpin = NULL;
+	vfbs->base.pin = &vmw_surface_dmabuf_pin;
+	vfbs->base.unpin = &vmw_surface_dmabuf_unpin;
 	vfbs->surface = surface;
 	mutex_init(&vfbs->work_lock);
 	INIT_DELAYED_WORK(&vfbs->d_work, &vmw_framebuffer_present_fs_callback);
@@ -589,6 +592,40 @@ static struct drm_framebuffer_funcs vmw_framebuffer_dmabuf_funcs = {
 	.create_handle = vmw_framebuffer_create_handle,
 };
 
+static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb)
+{
+	struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
+	struct vmw_framebuffer_surface *vfbs =
+		vmw_framebuffer_to_vfbs(&vfb->base);
+	unsigned long size = vfbs->base.base.pitch * vfbs->base.base.height;
+	int ret;
+
+	vfbs->buffer = kzalloc(sizeof(*vfbs->buffer), GFP_KERNEL);
+	if (unlikely(vfbs->buffer == NULL))
+		return -ENOMEM;
+
+	vmw_overlay_pause_all(dev_priv);
+	ret = vmw_dmabuf_init(dev_priv, vfbs->buffer, size,
+			       &vmw_vram_ne_placement,
+			       false, &vmw_dmabuf_bo_free);
+	vmw_overlay_resume_all(dev_priv);
+
+	return ret;
+}
+
+static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb)
+{
+	struct ttm_buffer_object *bo;
+	struct vmw_framebuffer_surface *vfbs =
+		vmw_framebuffer_to_vfbs(&vfb->base);
+
+	bo = &vfbs->buffer->base;
+	ttm_bo_unref(&bo);
+	vfbs->buffer = NULL;
+
+	return 0;
+}
+
 static int vmw_framebuffer_dmabuf_pin(struct vmw_framebuffer *vfb)
 {
 	struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
@@ -596,33 +633,15 @@ static int vmw_framebuffer_dmabuf_pin(struct vmw_framebuffer *vfb)
 		vmw_framebuffer_to_vfbd(&vfb->base);
 	int ret;
 
+
 	vmw_overlay_pause_all(dev_priv);
 
 	ret = vmw_dmabuf_to_start_of_vram(dev_priv, vfbd->buffer);
 
-	if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
-		vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_WIDTH, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-
-		vmw_write(dev_priv, SVGA_REG_ENABLE, 1);
-		vmw_write(dev_priv, SVGA_REG_WIDTH, vfb->base.width);
-		vmw_write(dev_priv, SVGA_REG_HEIGHT, vfb->base.height);
-		vmw_write(dev_priv, SVGA_REG_BITS_PER_PIXEL, vfb->base.bits_per_pixel);
-		vmw_write(dev_priv, SVGA_REG_DEPTH, vfb->base.depth);
-		vmw_write(dev_priv, SVGA_REG_RED_MASK, 0x00ff0000);
-		vmw_write(dev_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
-		vmw_write(dev_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
-	} else
-		WARN_ON(true);
-
 	vmw_overlay_resume_all(dev_priv);
 
+	WARN_ON(ret != 0);
+
 	return 0;
 }
 
@@ -668,7 +687,7 @@ int vmw_kms_new_framebuffer_dmabuf(struct vmw_private *dev_priv,
 
 	/* XXX get the first 3 from the surface info */
 	vfbd->base.base.bits_per_pixel = 32;
-	vfbd->base.base.pitch = width * 32 / 4;
+	vfbd->base.base.pitch = width * vfbd->base.base.bits_per_pixel / 8;
 	vfbd->base.base.depth = 24;
 	vfbd->base.base.width = width;
 	vfbd->base.base.height = height;
@@ -765,8 +784,9 @@ int vmw_kms_init(struct vmw_private *dev_priv)
 	dev->mode_config.funcs = &vmw_kms_funcs;
 	dev->mode_config.min_width = 1;
 	dev->mode_config.min_height = 1;
-	dev->mode_config.max_width = dev_priv->fb_max_width;
-	dev->mode_config.max_height = dev_priv->fb_max_height;
+	/* assumed largest fb size */
+	dev->mode_config.max_width = 8192;
+	dev->mode_config.max_height = 8192;
 
 	ret = vmw_kms_init_legacy_display_system(dev_priv);
 
@@ -826,49 +846,141 @@ out:
 	return ret;
 }
 
+void vmw_kms_write_svga(struct vmw_private *vmw_priv,
+			unsigned width, unsigned height, unsigned pitch,
+			unsigned bbp, unsigned depth)
+{
+	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+		vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, pitch);
+	else if (vmw_fifo_have_pitchlock(vmw_priv))
+		iowrite32(pitch, vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK);
+	vmw_write(vmw_priv, SVGA_REG_WIDTH, width);
+	vmw_write(vmw_priv, SVGA_REG_HEIGHT, height);
+	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bbp);
+	vmw_write(vmw_priv, SVGA_REG_DEPTH, depth);
+	vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
+	vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
+	vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
+}
+
 int vmw_kms_save_vga(struct vmw_private *vmw_priv)
 {
-	/*
-	 * setup a single multimon monitor with the size
-	 * of 0x0, this stops the UI from resizing when we
-	 * change the framebuffer size
-	 */
-	if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
-		vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
-		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-	}
+	struct vmw_vga_topology_state *save;
+	uint32_t i;
 
 	vmw_priv->vga_width = vmw_read(vmw_priv, SVGA_REG_WIDTH);
 	vmw_priv->vga_height = vmw_read(vmw_priv, SVGA_REG_HEIGHT);
-	vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL);
 	vmw_priv->vga_depth = vmw_read(vmw_priv, SVGA_REG_DEPTH);
+	vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL);
 	vmw_priv->vga_pseudo = vmw_read(vmw_priv, SVGA_REG_PSEUDOCOLOR);
 	vmw_priv->vga_red_mask = vmw_read(vmw_priv, SVGA_REG_RED_MASK);
-	vmw_priv->vga_green_mask = vmw_read(vmw_priv, SVGA_REG_GREEN_MASK);
 	vmw_priv->vga_blue_mask = vmw_read(vmw_priv, SVGA_REG_BLUE_MASK);
+	vmw_priv->vga_green_mask = vmw_read(vmw_priv, SVGA_REG_GREEN_MASK);
+	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+		vmw_priv->vga_pitchlock =
+		  vmw_read(vmw_priv, SVGA_REG_PITCHLOCK);
+	else if (vmw_fifo_have_pitchlock(vmw_priv))
+		vmw_priv->vga_pitchlock = ioread32(vmw_priv->mmio_virt +
+						       SVGA_FIFO_PITCHLOCK);
+
+	if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY))
+		return 0;
 
+	vmw_priv->num_displays = vmw_read(vmw_priv,
+					  SVGA_REG_NUM_GUEST_DISPLAYS);
+
+	for (i = 0; i < vmw_priv->num_displays; ++i) {
+		save = &vmw_priv->vga_save[i];
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i);
+		save->primary = vmw_read(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY);
+		save->pos_x = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_X);
+		save->pos_y = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y);
+		save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH);
+		save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+	}
 	return 0;
 }
 
 int vmw_kms_restore_vga(struct vmw_private *vmw_priv)
 {
+	struct vmw_vga_topology_state *save;
+	uint32_t i;
+
 	vmw_write(vmw_priv, SVGA_REG_WIDTH, vmw_priv->vga_width);
 	vmw_write(vmw_priv, SVGA_REG_HEIGHT, vmw_priv->vga_height);
-	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp);
 	vmw_write(vmw_priv, SVGA_REG_DEPTH, vmw_priv->vga_depth);
+	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp);
 	vmw_write(vmw_priv, SVGA_REG_PSEUDOCOLOR, vmw_priv->vga_pseudo);
 	vmw_write(vmw_priv, SVGA_REG_RED_MASK, vmw_priv->vga_red_mask);
 	vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, vmw_priv->vga_green_mask);
 	vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, vmw_priv->vga_blue_mask);
+	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+		vmw_write(vmw_priv, SVGA_REG_PITCHLOCK,
+			  vmw_priv->vga_pitchlock);
+	else if (vmw_fifo_have_pitchlock(vmw_priv))
+		iowrite32(vmw_priv->vga_pitchlock,
+			  vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK);
+
+	if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY))
+		return 0;
 
-	/* TODO check for multimon */
-	vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 0);
+	for (i = 0; i < vmw_priv->num_displays; ++i) {
+		save = &vmw_priv->vga_save[i];
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, save->primary);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, save->pos_x);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, save->pos_y);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, save->width);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, save->height);
+		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+	}
 
 	return 0;
 }
+
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct drm_vmw_update_layout_arg *arg =
+		(struct drm_vmw_update_layout_arg *)data;
+	struct vmw_master *vmaster = vmw_master(file_priv->master);
+	void __user *user_rects;
+	struct drm_vmw_rect *rects;
+	unsigned rects_size;
+	int ret;
+
+	ret = ttm_read_lock(&vmaster->lock, true);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (!arg->num_outputs) {
+		struct drm_vmw_rect def_rect = {0, 0, 800, 600};
+		vmw_kms_ldu_update_layout(dev_priv, 1, &def_rect);
+		goto out_unlock;
+	}
+
+	rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect);
+	rects = kzalloc(rects_size, GFP_KERNEL);
+	if (unlikely(!rects)) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	user_rects = (void __user *)(unsigned long)arg->rects;
+	ret = copy_from_user(rects, user_rects, rects_size);
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("Failed to get rects.\n");
+		ret = -EFAULT;
+		goto out_free;
+	}
+
+	vmw_kms_ldu_update_layout(dev_priv, arg->num_outputs, rects);
+
+out_free:
+	kfree(rects);
+out_unlock:
+	ttm_read_unlock(&vmaster->lock);
+	return ret;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index 8b95249f053..8a398a0339b 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -94,9 +94,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y);
 
 /*
- * Legacy display unit functions - vmwgfx_ldu.h
+ * Legacy display unit functions - vmwgfx_ldu.c
  */
 int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv);
 int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv);
+int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
+			      struct drm_vmw_rect *rects);
 
 #endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 90891593bf6..cfaf690a5b2 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -38,6 +38,7 @@ struct vmw_legacy_display {
 	struct list_head active;
 
 	unsigned num_active;
+	unsigned last_num_active;
 
 	struct vmw_framebuffer *fb;
 };
@@ -48,9 +49,12 @@ struct vmw_legacy_display {
 struct vmw_legacy_display_unit {
 	struct vmw_display_unit base;
 
-	struct list_head active;
+	unsigned pref_width;
+	unsigned pref_height;
+	bool pref_active;
+	struct drm_display_mode *pref_mode;
 
-	unsigned unit;
+	struct list_head active;
 };
 
 static void vmw_ldu_destroy(struct vmw_legacy_display_unit *ldu)
@@ -88,23 +92,44 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 {
 	struct vmw_legacy_display *lds = dev_priv->ldu_priv;
 	struct vmw_legacy_display_unit *entry;
-	struct drm_crtc *crtc;
+	struct drm_framebuffer *fb = NULL;
+	struct drm_crtc *crtc = NULL;
 	int i = 0;
 
-	/* to stop the screen from changing size on resize */
-	vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 0);
-	for (i = 0; i < lds->num_active; i++) {
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, i);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_IS_PRIMARY, !i);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_WIDTH, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
-		vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+	/* If there is no display topology the host just assumes
+	 * that the guest will set the same layout as the host.
+	 */
+	if (!(dev_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY)) {
+		int w = 0, h = 0;
+		list_for_each_entry(entry, &lds->active, active) {
+			crtc = &entry->base.crtc;
+			w = max(w, crtc->x + crtc->mode.hdisplay);
+			h = max(h, crtc->y + crtc->mode.vdisplay);
+			i++;
+		}
+
+		if (crtc == NULL)
+			return 0;
+		fb = entry->base.crtc.fb;
+
+		vmw_kms_write_svga(dev_priv, w, h, fb->pitch,
+				   fb->bits_per_pixel, fb->depth);
+
+		return 0;
 	}
 
-	/* Now set the mode */
-	vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, lds->num_active);
+	if (!list_empty(&lds->active)) {
+		entry = list_entry(lds->active.next, typeof(*entry), active);
+		fb = entry->base.crtc.fb;
+
+		vmw_kms_write_svga(dev_priv, fb->width, fb->height, fb->pitch,
+				   fb->bits_per_pixel, fb->depth);
+	}
+
+	/* Make sure we always show something. */
+	vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS,
+		  lds->num_active ? lds->num_active : 1);
+
 	i = 0;
 	list_for_each_entry(entry, &lds->active, active) {
 		crtc = &entry->base.crtc;
@@ -120,6 +145,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 		i++;
 	}
 
+	BUG_ON(i != lds->num_active);
+
+	lds->last_num_active = lds->num_active;
+
 	return 0;
 }
 
@@ -130,6 +159,7 @@ static int vmw_ldu_del_active(struct vmw_private *vmw_priv,
 	if (list_empty(&ldu->active))
 		return 0;
 
+	/* Must init otherwise list_empty(&ldu->active) will not work. */
 	list_del_init(&ldu->active);
 	if (--(ld->num_active) == 0) {
 		BUG_ON(!ld->fb);
@@ -149,24 +179,29 @@ static int vmw_ldu_add_active(struct vmw_private *vmw_priv,
 	struct vmw_legacy_display_unit *entry;
 	struct list_head *at;
 
+	BUG_ON(!ld->num_active && ld->fb);
+	if (vfb != ld->fb) {
+		if (ld->fb && ld->fb->unpin)
+			ld->fb->unpin(ld->fb);
+		if (vfb->pin)
+			vfb->pin(vfb);
+		ld->fb = vfb;
+	}
+
 	if (!list_empty(&ldu->active))
 		return 0;
 
 	at = &ld->active;
 	list_for_each_entry(entry, &ld->active, active) {
-		if (entry->unit > ldu->unit)
+		if (entry->base.unit > ldu->base.unit)
 			break;
 
 		at = &entry->active;
 	}
 
 	list_add(&ldu->active, at);
-	if (ld->num_active++ == 0) {
-		BUG_ON(ld->fb);
-		if (vfb->pin)
-			vfb->pin(vfb);
-		ld->fb = vfb;
-	}
+
+	ld->num_active++;
 
 	return 0;
 }
@@ -208,6 +243,8 @@ static int vmw_ldu_crtc_set_config(struct drm_mode_set *set)
 
 	/* ldu only supports one fb active at the time */
 	if (dev_priv->ldu_priv->fb && vfb &&
+	    !(dev_priv->ldu_priv->num_active == 1 &&
+	      !list_empty(&ldu->active)) &&
 	    dev_priv->ldu_priv->fb != vfb) {
 		DRM_ERROR("Multiple framebuffers not supported\n");
 		return -EINVAL;
@@ -300,8 +337,7 @@ static void vmw_ldu_connector_restore(struct drm_connector *connector)
 static enum drm_connector_status
 	vmw_ldu_connector_detect(struct drm_connector *connector)
 {
-	/* XXX vmwctrl should control connection status */
-	if (vmw_connector_to_ldu(connector)->base.unit == 0)
+	if (vmw_connector_to_ldu(connector)->pref_active)
 		return connector_status_connected;
 	return connector_status_disconnected;
 }
@@ -312,10 +348,9 @@ static struct drm_display_mode vmw_ldu_connector_builtin[] = {
 		   752, 800, 0, 480, 489, 492, 525, 0,
 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
 	/* 800x600@60Hz */
-	{ DRM_MODE("800x600",
-		   DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
-		   40000, 800, 840, 968, 1056, 0, 600, 601, 605, 628,
-		   0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+		   968, 1056, 0, 600, 601, 605, 628, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
 	/* 1024x768@60Hz */
 	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
 		   1184, 1344, 0, 768, 771, 777, 806, 0,
@@ -387,10 +422,34 @@ static struct drm_display_mode vmw_ldu_connector_builtin[] = {
 static int vmw_ldu_connector_fill_modes(struct drm_connector *connector,
 					uint32_t max_width, uint32_t max_height)
 {
+	struct vmw_legacy_display_unit *ldu = vmw_connector_to_ldu(connector);
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode = NULL;
+	struct drm_display_mode prefmode = { DRM_MODE("preferred",
+		DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
+	};
 	int i;
 
+	/* Add preferred mode */
+	{
+		mode = drm_mode_duplicate(dev, &prefmode);
+		if (!mode)
+			return 0;
+		mode->hdisplay = ldu->pref_width;
+		mode->vdisplay = ldu->pref_height;
+		mode->vrefresh = drm_mode_vrefresh(mode);
+		drm_mode_probed_add(connector, mode);
+
+		if (ldu->pref_mode) {
+			list_del_init(&ldu->pref_mode->head);
+			drm_mode_destroy(dev, ldu->pref_mode);
+		}
+
+		ldu->pref_mode = mode;
+	}
+
 	for (i = 0; vmw_ldu_connector_builtin[i].type != 0; i++) {
 		if (vmw_ldu_connector_builtin[i].hdisplay > max_width ||
 		    vmw_ldu_connector_builtin[i].vdisplay > max_height)
@@ -443,18 +502,21 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 	if (!ldu)
 		return -ENOMEM;
 
-	ldu->unit = unit;
+	ldu->base.unit = unit;
 	crtc = &ldu->base.crtc;
 	encoder = &ldu->base.encoder;
 	connector = &ldu->base.connector;
 
+	INIT_LIST_HEAD(&ldu->active);
+
+	ldu->pref_active = (unit == 0);
+	ldu->pref_width = 800;
+	ldu->pref_height = 600;
+	ldu->pref_mode = NULL;
+
 	drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
 			   DRM_MODE_CONNECTOR_LVDS);
-	/* Initial status */
-	if (unit == 0)
-		connector->status = connector_status_connected;
-	else
-		connector->status = connector_status_disconnected;
+	connector->status = vmw_ldu_connector_detect(connector);
 
 	drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
 			 DRM_MODE_ENCODER_LVDS);
@@ -462,8 +524,6 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 	encoder->possible_crtcs = (1 << unit);
 	encoder->possible_clones = 0;
 
-	INIT_LIST_HEAD(&ldu->active);
-
 	drm_crtc_init(dev, crtc, &vmw_legacy_crtc_funcs);
 
 	drm_connector_attach_property(connector,
@@ -487,18 +547,22 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
 
 	INIT_LIST_HEAD(&dev_priv->ldu_priv->active);
 	dev_priv->ldu_priv->num_active = 0;
+	dev_priv->ldu_priv->last_num_active = 0;
 	dev_priv->ldu_priv->fb = NULL;
 
 	drm_mode_create_dirty_info_property(dev_priv->dev);
 
 	vmw_ldu_init(dev_priv, 0);
-	vmw_ldu_init(dev_priv, 1);
-	vmw_ldu_init(dev_priv, 2);
-	vmw_ldu_init(dev_priv, 3);
-	vmw_ldu_init(dev_priv, 4);
-	vmw_ldu_init(dev_priv, 5);
-	vmw_ldu_init(dev_priv, 6);
-	vmw_ldu_init(dev_priv, 7);
+	/* for old hardware without multimon only enable one display */
+	if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
+		vmw_ldu_init(dev_priv, 1);
+		vmw_ldu_init(dev_priv, 2);
+		vmw_ldu_init(dev_priv, 3);
+		vmw_ldu_init(dev_priv, 4);
+		vmw_ldu_init(dev_priv, 5);
+		vmw_ldu_init(dev_priv, 6);
+		vmw_ldu_init(dev_priv, 7);
+	}
 
 	return 0;
 }
@@ -514,3 +578,42 @@ int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv)
 
 	return 0;
 }
+
+int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
+			      struct drm_vmw_rect *rects)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct vmw_legacy_display_unit *ldu;
+	struct drm_connector *con;
+	int i;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+#if 0
+	DRM_INFO("%s: new layout ", __func__);
+	for (i = 0; i < (int)num; i++)
+		DRM_INFO("(%i, %i %ux%u) ", rects[i].x, rects[i].y,
+			 rects[i].w, rects[i].h);
+	DRM_INFO("\n");
+#else
+	(void)i;
+#endif
+
+	list_for_each_entry(con, &dev->mode_config.connector_list, head) {
+		ldu = vmw_connector_to_ldu(con);
+		if (num > ldu->base.unit) {
+			ldu->pref_width = rects[ldu->base.unit].w;
+			ldu->pref_height = rects[ldu->base.unit].h;
+			ldu->pref_active = true;
+		} else {
+			ldu->pref_width = 800;
+			ldu->pref_height = 600;
+			ldu->pref_active = false;
+		}
+		con->status = vmw_ldu_connector_detect(con);
+	}
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index ad566c85b07..df2036ed18d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -358,6 +358,8 @@ static int vmw_overlay_update_stream(struct vmw_private *dev_priv,
 	if (stream->buf != buf)
 		stream->buf = vmw_dmabuf_reference(buf);
 	stream->saved = *arg;
+	/* stream is no longer stopped/paused */
+	stream->paused = false;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index f8fbbc67a40..8612378b131 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -597,8 +597,10 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data,
 
 	ret = copy_from_user(srf->sizes, user_sizes,
 			     srf->num_sizes * sizeof(*srf->sizes));
-	if (unlikely(ret != 0))
+	if (unlikely(ret != 0)) {
+		ret = -EFAULT;
 		goto out_err1;
+	}
 
 	if (srf->scanout &&
 	    srf->num_sizes == 1 &&
@@ -697,9 +699,11 @@ int vmw_surface_reference_ioctl(struct drm_device *dev, void *data,
 	if (user_sizes)
 		ret = copy_to_user(user_sizes, srf->sizes,
 				   srf->num_sizes * sizeof(*srf->sizes));
-	if (unlikely(ret != 0))
+	if (unlikely(ret != 0)) {
 		DRM_ERROR("copy_to_user failed %p %u\n",
 			  user_sizes, srf->num_sizes);
+		ret = -EFAULT;
+	}
 out_bad_resource:
 out_no_reference:
 	ttm_base_object_unref(&base);
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 441e38c95a8..b87569e96b1 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1,12 +1,32 @@
 /*
- * vgaarb.c
+ * vgaarb.c: Implements the VGA arbitration. For details refer to
+ * Documentation/vgaarbiter.txt
+ *
  *
  * (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
  * (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
  * (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
  *
- * Implements the VGA arbitration. For details refer to
- * Documentation/vgaarbiter.txt
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS
+ * IN THE SOFTWARE.
+ *
  */
 
 #include <linux/module.h>
@@ -155,8 +175,8 @@ static struct vga_device *__vga_tryget(struct vga_device *vgadev,
 	    (vgadev->decodes & VGA_RSRC_LEGACY_MEM))
 		rsrc |= VGA_RSRC_LEGACY_MEM;
 
-	pr_devel("%s: %d\n", __func__, rsrc);
-	pr_devel("%s: owns: %d\n", __func__, vgadev->owns);
+	pr_debug("%s: %d\n", __func__, rsrc);
+	pr_debug("%s: owns: %d\n", __func__, vgadev->owns);
 
 	/* Check what resources we need to acquire */
 	wants = rsrc & ~vgadev->owns;
@@ -268,7 +288,7 @@ static void __vga_put(struct vga_device *vgadev, unsigned int rsrc)
 {
 	unsigned int old_locks = vgadev->locks;
 
-	pr_devel("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	/* Update our counters, and account for equivalent legacy resources
 	 * if we decode them
@@ -575,6 +595,7 @@ static inline void vga_update_device_decodes(struct vga_device *vgadev,
 		else
 			vga_decode_count--;
 	}
+	pr_debug("vgaarb: decoding count now is: %d\n", vga_decode_count);
 }
 
 void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
@@ -831,7 +852,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 		curr_pos += 5;
 		remaining -= 5;
 
-		pr_devel("client 0x%p called 'lock'\n", priv);
+		pr_debug("client 0x%p called 'lock'\n", priv);
 
 		if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
 			ret_val = -EPROTO;
@@ -867,7 +888,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 		curr_pos += 7;
 		remaining -= 7;
 
-		pr_devel("client 0x%p called 'unlock'\n", priv);
+		pr_debug("client 0x%p called 'unlock'\n", priv);
 
 		if (strncmp(curr_pos, "all", 3) == 0)
 			io_state = VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
@@ -917,7 +938,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 		curr_pos += 8;
 		remaining -= 8;
 
-		pr_devel("client 0x%p called 'trylock'\n", priv);
+		pr_debug("client 0x%p called 'trylock'\n", priv);
 
 		if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
 			ret_val = -EPROTO;
@@ -961,7 +982,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 
 		curr_pos += 7;
 		remaining -= 7;
-		pr_devel("client 0x%p called 'target'\n", priv);
+		pr_debug("client 0x%p called 'target'\n", priv);
 		/* if target is default */
 		if (!strncmp(curr_pos, "default", 7))
 			pdev = pci_dev_get(vga_default_device());
@@ -971,11 +992,11 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 				ret_val = -EPROTO;
 				goto done;
 			}
-			pr_devel("vgaarb: %s ==> %x:%x:%x.%x\n", curr_pos,
+			pr_debug("vgaarb: %s ==> %x:%x:%x.%x\n", curr_pos,
 				domain, bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 			pbus = pci_find_bus(domain, bus);
-			pr_devel("vgaarb: pbus %p\n", pbus);
+			pr_debug("vgaarb: pbus %p\n", pbus);
 			if (pbus == NULL) {
 				pr_err("vgaarb: invalid PCI domain and/or bus address %x:%x\n",
 					domain, bus);
@@ -983,7 +1004,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 				goto done;
 			}
 			pdev = pci_get_slot(pbus, devfn);
-			pr_devel("vgaarb: pdev %p\n", pdev);
+			pr_debug("vgaarb: pdev %p\n", pdev);
 			if (!pdev) {
 				pr_err("vgaarb: invalid PCI address %x:%x\n",
 					bus, devfn);
@@ -993,7 +1014,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 		}
 
 		vgadev = vgadev_find(pdev);
-		pr_devel("vgaarb: vgadev %p\n", vgadev);
+		pr_debug("vgaarb: vgadev %p\n", vgadev);
 		if (vgadev == NULL) {
 			pr_err("vgaarb: this pci device is not a vga device\n");
 			pci_dev_put(pdev);
@@ -1029,7 +1050,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf,
 	} else if (strncmp(curr_pos, "decodes ", 8) == 0) {
 		curr_pos += 8;
 		remaining -= 8;
-		pr_devel("vgaarb: client 0x%p called 'decodes'\n", priv);
+		pr_debug("vgaarb: client 0x%p called 'decodes'\n", priv);
 
 		if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
 			ret_val = -EPROTO;
@@ -1058,7 +1079,7 @@ static unsigned int vga_arb_fpoll(struct file *file, poll_table * wait)
 {
 	struct vga_arb_private *priv = file->private_data;
 
-	pr_devel("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	if (priv == NULL)
 		return -ENODEV;
@@ -1071,7 +1092,7 @@ static int vga_arb_open(struct inode *inode, struct file *file)
 	struct vga_arb_private *priv;
 	unsigned long flags;
 
-	pr_devel("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	priv = kmalloc(sizeof(struct vga_arb_private), GFP_KERNEL);
 	if (priv == NULL)
@@ -1101,7 +1122,7 @@ static int vga_arb_release(struct inode *inode, struct file *file)
 	unsigned long flags;
 	int i;
 
-	pr_devel("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	if (priv == NULL)
 		return -ENODEV;
@@ -1112,7 +1133,7 @@ static int vga_arb_release(struct inode *inode, struct file *file)
 		uc = &priv->cards[i];
 		if (uc->pdev == NULL)
 			continue;
-		pr_devel("uc->io_cnt == %d, uc->mem_cnt == %d\n",
+		pr_debug("uc->io_cnt == %d, uc->mem_cnt == %d\n",
 			 uc->io_cnt, uc->mem_cnt);
 		while (uc->io_cnt--)
 			vga_put(uc->pdev, VGA_RSRC_LEGACY_IO);
@@ -1165,7 +1186,7 @@ static int pci_notify(struct notifier_block *nb, unsigned long action,
 	struct pci_dev *pdev = to_pci_dev(dev);
 	bool notify = false;
 
-	pr_devel("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	/* For now we're only intereted in devices added and removed. I didn't
 	 * test this thing here, so someone needs to double check for the
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 132278fa624..43409936905 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -358,6 +358,7 @@ config HID_ROCCAT
 config HID_ROCCAT_KONE
 	tristate "Roccat Kone Mouse support"
 	depends on USB_HID
+	select HID_ROCCAT
 	---help---
 	Support for Roccat Kone mouse.
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index aa0f7dcabcd..b54a9a608ac 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1337,6 +1337,24 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
@@ -1568,6 +1586,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
@@ -1760,7 +1779,8 @@ int hid_add_device(struct hid_device *hdev)
 
 	/* we need to kill them here, otherwise they will stay allocated to
 	 * wait for coming driver */
-	if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev))
+	if (!(hdev->quirks & HID_QUIRK_NO_IGNORE)
+            && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
 		return -ENODEV;
 
 	/* XXX hack, any other cleaner solution after the driver core
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index c9402676857..850d02a7a92 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -949,8 +949,8 @@ static ssize_t hid_debug_events_read(struct file *file, char __user *buffer,
 	int ret = 0, len;
 	DECLARE_WAITQUEUE(wait, current);
 
+	mutex_lock(&list->read_mutex);
 	while (ret == 0) {
-		mutex_lock(&list->read_mutex);
 		if (list->head == list->tail) {
 			add_wait_queue(&list->hdev->debug_wait, &wait);
 			set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6af77ed0b55..8aee2577c1a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -134,6 +134,7 @@
 #define USB_VENDOR_ID_CH		0x068e
 #define USB_DEVICE_ID_CH_PRO_PEDALS	0x00f2
 #define USB_DEVICE_ID_CH_COMBATSTICK	0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE       0x0051
 #define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE	0x00ff
 #define USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK	0x00d3
 
@@ -197,6 +198,7 @@
 
 #define USB_VENDOR_ID_ETT		0x0664
 #define USB_DEVICE_ID_TC5UH		0x0309
+#define USB_DEVICE_ID_TC4UM		0x0306
 
 #define USB_VENDOR_ID_EZKEY 		0x0518
 #define USB_DEVICE_ID_BTC_8193		0x0002
@@ -369,6 +371,8 @@
 #define USB_DEVICE_ID_MS_PRESENTER_8K_BT	0x0701
 #define USB_DEVICE_ID_MS_PRESENTER_8K_USB	0x0713
 
+#define USB_VENDOR_ID_MOJO		0x8282
+#define USB_DEVICE_ID_RETRO_ADAPTER	0x3201
 
 #define USB_VENDOR_ID_MONTEREY		0x0566
 #define USB_DEVICE_ID_GENIUS_KB29E	0x3004
@@ -391,6 +395,24 @@
 
 #define USB_VENDOR_ID_NTRIG                0x1b96
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN   0x0001
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1   0x0003
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2   0x0004
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3   0x0005
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4   0x0006
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5   0x0007
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6   0x0008
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7   0x0009
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8   0x000A
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9   0x000B
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10   0x000C
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11   0x000D
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12   0x000E
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13   0x000F
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14   0x0010
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15   0x0011
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16   0x0012
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17   0x0013
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18   0x0014
 
 #define USB_VENDOR_ID_ONTRAK		0x0a07
 #define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 7a0d2e4661a..69d152e16a6 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -534,6 +534,9 @@ mapped:
 			input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4);
 		else	input_set_abs_params(input, usage->code, a, b, 0, 0);
 
+		/* use a larger default input buffer for MT devices */
+		if (usage->code == ABS_MT_POSITION_X && input->hint_events_per_packet == 0)
+			input_set_events_per_packet(input, 60);
 	}
 
 	if (usage->type == EV_ABS &&
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index b6b0caeeac5..fb69b8c4953 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -868,6 +868,42 @@ static void ntrig_remove(struct hid_device *hdev)
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 1ebd3244eb8..b729c028667 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -827,14 +827,21 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 				ret++;
 		}
 	} else {
+		int skipped_report_id = 0;
+		if (buf[0] == 0x0) {
+			/* Don't send the Report ID */
+			buf++;
+			count--;
+			skipped_report_id = 1;
+		}
 		ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			HID_REQ_SET_REPORT,
 			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			((report_type + 1) << 8) | *buf,
-			interface->desc.bInterfaceNumber, buf + 1, count - 1,
+			interface->desc.bInterfaceNumber, buf, count,
 			USB_CTRL_SET_TIMEOUT);
-		/* count also the report id */
-		if (ret > 0)
+		/* count also the report id, if this was a numbered report. */
+		if (ret > 0 && skipped_report_id)
 			ret++;
 	}
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5ff8d327f33..5f5aa39b398 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -34,6 +34,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
@@ -56,6 +57,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index 4086c7257f9..f13c843a296 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -316,7 +316,6 @@ static int __devinit adt7411_probe(struct i2c_client *client,
  exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
  exit_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return ret;
 }
@@ -327,7 +326,6 @@ static int __devexit adt7411_remove(struct i2c_client *client)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index 0f388adc618..3b973f30b1f 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -1141,7 +1141,6 @@ exit_remove:
 				   &(asc7621_params[i].sda.dev_attr));
 	}
 
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return err;
 }
@@ -1196,7 +1195,6 @@ static int asc7621_remove(struct i2c_client *client)
 				   &(asc7621_params[i].sda.dev_attr));
 	}
 
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 2988da150ed..05344af5073 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -53,6 +53,7 @@ struct coretemp_data {
 	struct mutex update_lock;
 	const char *name;
 	u32 id;
+	u16 core_id;
 	char valid;		/* zero until following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
 	int temp;
@@ -75,7 +76,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 	if (attr->index == SHOW_NAME)
 		ret = sprintf(buf, "%s\n", data->name);
 	else	/* show label */
-		ret = sprintf(buf, "Core %d\n", data->id);
+		ret = sprintf(buf, "Core %d\n", data->core_id);
 	return ret;
 }
 
@@ -304,6 +305,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	}
 
 	data->id = pdev->id;
+#ifdef CONFIG_SMP
+	data->core_id = c->cpu_core_id;
+#endif
 	data->name = "coretemp";
 	mutex_init(&data->update_lock);
 
@@ -405,6 +409,10 @@ struct pdev_entry {
 	struct list_head list;
 	struct platform_device *pdev;
 	unsigned int cpu;
+#ifdef CONFIG_SMP
+	u16 phys_proc_id;
+	u16 cpu_core_id;
+#endif
 };
 
 static LIST_HEAD(pdev_list);
@@ -415,6 +423,22 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+	mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+	/* Skip second HT entry of each core */
+	list_for_each_entry(pdev_entry, &pdev_list, list) {
+		if (c->phys_proc_id == pdev_entry->phys_proc_id &&
+		    c->cpu_core_id == pdev_entry->cpu_core_id) {
+			err = 0;	/* Not an error */
+			goto exit;
+		}
+	}
+#endif
 
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
@@ -438,7 +462,10 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 
 	pdev_entry->pdev = pdev;
 	pdev_entry->cpu = cpu;
-	mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+	pdev_entry->phys_proc_id = c->phys_proc_id;
+	pdev_entry->cpu_core_id = c->cpu_core_id;
+#endif
 	list_add_tail(&pdev_entry->list, &pdev_list);
 	mutex_unlock(&pdev_list_mutex);
 
@@ -449,6 +476,7 @@ exit_device_free:
 exit_device_put:
 	platform_device_put(pdev);
 exit:
+	mutex_unlock(&pdev_list_mutex);
 	return err;
 }
 
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index bad2cf3ef4a..0f58ecc5334 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -662,7 +662,6 @@ exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &f75375_group);
 exit_free:
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 	return err;
 }
 
@@ -672,7 +671,6 @@ static int f75375_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &f75375_group);
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 09ea12e0a55..1f63d1a3af5 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -236,7 +236,6 @@ error_hwmon_device_register:
 	sysfs_remove_group(&client->dev.kobj, &g760a_group);
 error_sysfs_create_group:
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 
 	return err;
 }
@@ -247,7 +246,6 @@ static int g760a_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &g760a_group);
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index e880e2c3871..937983407e2 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -289,6 +289,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_label;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -303,6 +304,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_temp;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -318,6 +320,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_min;
 			iattr->s_attr.dev_attr.store = store_amb_min;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -333,6 +336,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_mid;
 			iattr->s_attr.dev_attr.store = store_amb_mid;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -348,6 +352,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_max;
 			iattr->s_attr.dev_attr.store = store_amb_max;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -362,6 +367,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_alarm;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5be09c048c5..25763d2223b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -80,6 +80,13 @@ superio_inb(int reg)
 	return inb(VAL);
 }
 
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
 static int superio_inw(int reg)
 {
 	int val;
@@ -1517,6 +1524,21 @@ static int __init it87_find(unsigned short *address,
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
+		/*
+		 * The IT8720F has no VIN7 pin, so VCCH should always be
+		 * routed internally to VIN7 with an internal divider.
+		 * Curiously, there still is a configuration bit to control
+		 * this, which means it can be set incorrectly. And even
+		 * more curiously, many boards out there are improperly
+		 * configured, even though the IT8720F datasheet claims
+		 * that the internal routing of VCCH to VIN7 is the default
+		 * setting. So we force the internal routing in this case.
+		 */
+		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+			reg |= (1 << 1);
+			superio_outb(IT87_SIO_PINX2_REG, reg);
+			pr_notice("it87: Routing internal VCCH to in7\n");
+		}
 		if (reg & (1 << 0))
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 099a2138cdf..da5a2404cd3 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -112,11 +112,21 @@ static bool __devinit has_erratum_319(struct pci_dev *pdev)
 	if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
 		return false;
 
-	/* Differentiate between AM2+ (bad) and AM3 (good) */
+	/* DDR3 memory implies socket AM3, which is good */
 	pci_bus_read_config_dword(pdev->bus,
 				  PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
 				  REG_DCT0_CONFIG_HIGH, &reg_dram_cfg);
-	return !(reg_dram_cfg & DDR3_MODE);
+	if (reg_dram_cfg & DDR3_MODE)
+		return false;
+
+	/*
+	 * Unfortunately it is possible to run a socket AM3 CPU with DDR2
+	 * memory. We blacklist all the cores which do exist in socket AM2+
+	 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
+	 * and AM3 formats, but that's the best we can do.
+	 */
+	return boot_cpu_data.x86_model < 4 ||
+	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
 }
 
 static int __devinit k10temp_probe(struct pci_dev *pdev,
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 0ceb6d6200a..8bdf80d9159 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -120,7 +120,7 @@ static ssize_t show_temp(struct device *dev,
 	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
-	if (data->swap_core_select)
+	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
 		core = core ? 0 : 1;
 
 	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
@@ -180,11 +180,13 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 		}
 
 		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
+		      model == 0x6b || model == 0x6f || model == 0x7f)) {
 			/*
-			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
-			 * need additional offset, otherwise reported
-			 * temperature is below ambient temperature
+			 * RevG desktop CPUs (i.e. no socket S1G1 or
+			 * ASB1 parts) need additional offset,
+			 * otherwise reported temperature is below
+			 * ambient temperature
 			 */
 			data->temp_offset = 21000;
 		}
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 4d1b76bc814..29b9030d42c 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -136,7 +136,6 @@ static int lm73_remove(struct i2c_client *client)
 
 	hwmon_device_unregister(hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm73_group);
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 56463428a41..393f354f92a 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -192,7 +192,6 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &lm75_group);
 exit_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return status;
 }
@@ -204,7 +203,6 @@ static int lm75_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm75_group);
 	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 8fc8eb8cba4..94741d42112 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -399,7 +399,6 @@ static int lm95241_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm95241_group);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 8013895a1fa..93187c3cb5e 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -224,7 +224,6 @@ fail_remove_sysfs:
 fail_restore_config:
 	tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
 fail_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(tmp102);
 
 	return status;
@@ -247,7 +246,6 @@ static int __devexit tmp102_remove(struct i2c_client *client)
 					 config | TMP102_CONF_SD);
 	}
 
-	i2c_set_clientdata(client, NULL);
 	kfree(tmp102);
 
 	return 0;
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 738c472ece2..6b4165c1209 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -295,7 +295,6 @@ exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
 
 exit_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return err;
@@ -308,7 +307,6 @@ static int tmp421_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return 0;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 32d4adee73d..c84b9b4e696 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1197,7 +1197,6 @@ ERROR4:
 	if (data->lm75[1])
 		i2c_unregister_device(data->lm75[1]);
 ERROR3:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 ERROR1:
 	return err;
@@ -1219,7 +1218,6 @@ w83781d_remove(struct i2c_client *client)
 	if (data->lm75[1])
 		i2c_unregister_device(data->lm75[1]);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return 0;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87ab0568bb0..bceafbfa726 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -475,6 +475,26 @@ config I2C_PASEMI
 	help
 	  Supports the PA Semi PWRficient on-chip SMBus interfaces.
 
+config I2C_PCA_PLATFORM
+	tristate "PCA9564/PCA9665 as platform device"
+	select I2C_ALGOPCA
+	default n
+	help
+	  This driver supports a memory mapped Philips PCA9564/PCA9665
+	  parallel bus to I2C bus controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-platform.
+
+config I2C_PMCMSP
+	tristate "PMC MSP I2C TWI Controller"
+	depends on PMC_MSP
+	help
+	  This driver supports the PMC TWI controller on MSP devices.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-pmcmsp.
+
 config I2C_PNX
 	tristate "I2C bus support for Philips PNX targets"
 	depends on ARCH_PNX4008
@@ -711,26 +731,6 @@ config I2C_PCA_ISA
 	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
 	  time).  If unsure, say N.
 
-config I2C_PCA_PLATFORM
-	tristate "PCA9564/PCA9665 as platform device"
-	select I2C_ALGOPCA
-	default n
-	help
-	  This driver supports a memory mapped Philips PCA9564/PCA9665
-	  parallel bus to I2C bus controller.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-pca-platform.
-
-config I2C_PMCMSP
-	tristate "PMC MSP I2C TWI Controller"
-	depends on PMC_MSP
-	help
-	  This driver supports the PMC TWI controller on MSP devices.
-
-	  This driver can also be built as module. If so, the module
-	  will be called i2c-pmcmsp.
-
 config I2C_SIBYTE
 	tristate "SiByte SMBus interface"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 097236f631e..936880bd1dc 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
 obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 
-# Embebbed system I2C/SMBus host controller drivers
+# Embedded system I2C/SMBus host controller drivers
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
@@ -46,6 +46,8 @@ obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
+obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
@@ -68,8 +70,6 @@ obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
-obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index f4b21f2bb8e..c60081169cc 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -655,7 +655,7 @@ static void __devinit dmi_check_onboard_device(u8 type, const char *name,
 		/* & ~0x80, ignore enabled/disabled bit */
 		if ((type & ~0x80) != dmi_devices[i].type)
 			continue;
-		if (strcmp(name, dmi_devices[i].name))
+		if (strcasecmp(name, dmi_devices[i].name))
 			continue;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
@@ -704,9 +704,6 @@ static int __devinit i801_probe(struct pci_dev *dev,
 {
 	unsigned char temp;
 	int err, i;
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	const char *vendor;
-#endif
 
 	I801_dev = dev;
 	i801_features = 0;
@@ -808,8 +805,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
 	}
 #endif
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-	if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
+	if (dmi_name_in_vendors("FUJITSU"))
 		dmi_walk(dmi_check_onboard_devices, &i801_adapter);
 #endif
 
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 3d76a188e42..0fe505d7abe 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -94,7 +94,7 @@ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
 		}
 		break;
 	default:
-		return -1;      /* XXXKW better error code? */
+		return -EOPNOTSUPP;
 	}
 
 	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
@@ -104,7 +104,7 @@ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
 	if (error & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
 		csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
-		return -1;      /* XXXKW better error code? */
+		return (error & M_SMB_ERROR_TYPE) ? -EIO : -ENXIO;
 	}
 
 	if (data_bytes == 1)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e0f833cca3f..0815e10da7c 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -47,7 +47,6 @@ static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
 
 static struct device_type i2c_client_type;
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
 /* ------------------------------------------------------------------------- */
@@ -371,6 +370,59 @@ struct i2c_client *i2c_verify_client(struct device *dev)
 EXPORT_SYMBOL(i2c_verify_client);
 
 
+/* This is a permissive address validity check, I2C address map constraints
+ * are purposedly not enforced, except for the general call address. */
+static int i2c_check_client_addr_validity(const struct i2c_client *client)
+{
+	if (client->flags & I2C_CLIENT_TEN) {
+		/* 10-bit address, all values are valid */
+		if (client->addr > 0x3ff)
+			return -EINVAL;
+	} else {
+		/* 7-bit address, reject the general call address */
+		if (client->addr == 0x00 || client->addr > 0x7f)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+/* And this is a strict address validity check, used when probing. If a
+ * device uses a reserved address, then it shouldn't be probed. 7-bit
+ * addressing is assumed, 10-bit address devices are rare and should be
+ * explicitly enumerated. */
+static int i2c_check_addr_validity(unsigned short addr)
+{
+	/*
+	 * Reserved addresses per I2C specification:
+	 *  0x00       General call address / START byte
+	 *  0x01       CBUS address
+	 *  0x02       Reserved for different bus format
+	 *  0x03       Reserved for future purposes
+	 *  0x04-0x07  Hs-mode master code
+	 *  0x78-0x7b  10-bit slave addressing
+	 *  0x7c-0x7f  Reserved for future purposes
+	 */
+	if (addr < 0x08 || addr > 0x77)
+		return -EINVAL;
+	return 0;
+}
+
+static int __i2c_check_addr_busy(struct device *dev, void *addrp)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	int			addr = *(int *)addrp;
+
+	if (client && client->addr == addr)
+		return -EBUSY;
+	return 0;
+}
+
+static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
+{
+	return device_for_each_child(&adapter->dev, &addr,
+				     __i2c_check_addr_busy);
+}
+
 /**
  * i2c_new_device - instantiate an i2c device
  * @adap: the adapter managing the device
@@ -410,8 +462,16 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
 	strlcpy(client->name, info->type, sizeof(client->name));
 
+	/* Check for address validity */
+	status = i2c_check_client_addr_validity(client);
+	if (status) {
+		dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
+			client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
+		goto out_err_silent;
+	}
+
 	/* Check for address business */
-	status = i2c_check_addr(adap, client->addr);
+	status = i2c_check_addr_busy(adap, client->addr);
 	if (status)
 		goto out_err;
 
@@ -436,6 +496,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 out_err:
 	dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
 		"(%d)\n", client->name, client->addr, status);
+out_err_silent:
 	kfree(client);
 	return NULL;
 }
@@ -561,15 +622,9 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	if (info.addr < 0x03 || info.addr > 0x77) {
-		dev_err(dev, "%s: Invalid I2C address 0x%hx\n", "new_device",
-			info.addr);
-		return -EINVAL;
-	}
-
 	client = i2c_new_device(adap, &info);
 	if (!client)
-		return -EEXIST;
+		return -EINVAL;
 
 	/* Keep track of the added device */
 	i2c_lock_adapter(adap);
@@ -1024,21 +1079,6 @@ EXPORT_SYMBOL(i2c_del_driver);
 
 /* ------------------------------------------------------------------------- */
 
-static int __i2c_check_addr(struct device *dev, void *addrp)
-{
-	struct i2c_client	*client = i2c_verify_client(dev);
-	int			addr = *(int *)addrp;
-
-	if (client && client->addr == addr)
-		return -EBUSY;
-	return 0;
-}
-
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
-{
-	return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr);
-}
-
 /**
  * i2c_use_client - increments the reference count of the i2c client structure
  * @client: the client being referenced
@@ -1277,6 +1317,41 @@ EXPORT_SYMBOL(i2c_master_recv);
  * ----------------------------------------------------
  */
 
+/*
+ * Legacy default probe function, mostly relevant for SMBus. The default
+ * probe method is a quick write, but it is known to corrupt the 24RF08
+ * EEPROMs due to a state machine bug, and could also irreversibly
+ * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
+ * we use a short byte read instead. Also, some bus drivers don't implement
+ * quick write, so we fallback to a byte read in that case too.
+ * On x86, there is another special case for FSC hardware monitoring chips,
+ * which want regular byte reads (address 0x73.) Fortunately, these are the
+ * only known chips using this I2C address on PC hardware.
+ * Returns 1 if probe succeeded, 0 if not.
+ */
+static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
+{
+	int err;
+	union i2c_smbus_data dummy;
+
+#ifdef CONFIG_X86
+	if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
+	 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE_DATA, &dummy);
+	else
+#endif
+	if ((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50
+	 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE, &dummy);
+	else
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
+				     I2C_SMBUS_QUICK, NULL);
+
+	return err >= 0;
+}
+
 static int i2c_detect_address(struct i2c_client *temp_client,
 			      struct i2c_driver *driver)
 {
@@ -1286,34 +1361,20 @@ static int i2c_detect_address(struct i2c_client *temp_client,
 	int err;
 
 	/* Make sure the address is valid */
-	if (addr < 0x03 || addr > 0x77) {
+	err = i2c_check_addr_validity(addr);
+	if (err) {
 		dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
 			 addr);
-		return -EINVAL;
+		return err;
 	}
 
 	/* Skip if already in use */
-	if (i2c_check_addr(adapter, addr))
+	if (i2c_check_addr_busy(adapter, addr))
 		return 0;
 
 	/* Make sure there is something at this address */
-	if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) {
-		/* Special probe for FSC hwmon chips */
-		union i2c_smbus_data dummy;
-
-		if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
-				   I2C_SMBUS_BYTE_DATA, &dummy) < 0)
-			return 0;
-	} else {
-		if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
-				   I2C_SMBUS_QUICK, NULL) < 0)
-			return 0;
-
-		/* Prevent 24RF08 corruption */
-		if ((addr & ~0x0f) == 0x50)
-			i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
-				       I2C_SMBUS_QUICK, NULL);
-	}
+	if (!i2c_default_probe(adapter, addr))
+		return 0;
 
 	/* Finally call the custom detection function */
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -1367,13 +1428,12 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	if (!(adapter->class & driver->class))
 		goto exit_free;
 
-	/* Stop here if we can't use SMBUS_QUICK */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+	/* Stop here if the bus doesn't support probing */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
 		if (address_list[0] == I2C_CLIENT_END)
 			goto exit_free;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_warn(&adapter->dev, "Probing not supported\n");
 		err = -EOPNOTSUPP;
 		goto exit_free;
 	}
@@ -1407,42 +1467,22 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 
 	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
 		/* Check address validity */
-		if (addr_list[i] < 0x03 || addr_list[i] > 0x77) {
+		if (i2c_check_addr_validity(addr_list[i]) < 0) {
 			dev_warn(&adap->dev, "Invalid 7-bit address "
 				 "0x%02x\n", addr_list[i]);
 			continue;
 		}
 
 		/* Check address availability */
-		if (i2c_check_addr(adap, addr_list[i])) {
+		if (i2c_check_addr_busy(adap, addr_list[i])) {
 			dev_dbg(&adap->dev, "Address 0x%02x already in "
 				"use, not probing\n", addr_list[i]);
 			continue;
 		}
 
-		/* Test address responsiveness
-		   The default probe method is a quick write, but it is known
-		   to corrupt the 24RF08 EEPROMs due to a state machine bug,
-		   and could also irreversibly write-protect some EEPROMs, so
-		   for address ranges 0x30-0x37 and 0x50-0x5f, we use a byte
-		   read instead. Also, some bus drivers don't implement
-		   quick write, so we fallback to a byte read it that case
-		   too. */
-		if ((addr_list[i] & ~0x07) == 0x30
-		 || (addr_list[i] & ~0x0f) == 0x50
-		 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
-			union i2c_smbus_data data;
-
-			if (i2c_smbus_xfer(adap, addr_list[i], 0,
-					   I2C_SMBUS_READ, 0,
-					   I2C_SMBUS_BYTE, &data) >= 0)
-				break;
-		} else {
-			if (i2c_smbus_xfer(adap, addr_list[i], 0,
-					   I2C_SMBUS_WRITE, 0,
-					   I2C_SMBUS_QUICK, NULL) >= 0)
-				break;
-		}
+		/* Test address responsiveness */
+		if (i2c_default_probe(adap, addr_list[i]))
+			break;
 	}
 
 	if (addr_list[i] == I2C_CLIENT_END) {
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index a24e0bfe920..f61ccc1e5ea 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -173,7 +173,6 @@ static int smbalert_remove(struct i2c_client *ara)
 
 	cancel_work_sync(&alert->alert);
 
-	i2c_set_clientdata(ara, NULL);
 	kfree(alert);
 	return 0;
 }
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 183fa38760d..ebcf8e470a9 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1400,8 +1400,11 @@ static struct of_device_id pmac_ide_macio_match[] =
 
 static struct macio_driver pmac_ide_macio_driver = 
 {
-	.name 		= "ide-pmac",
-	.match_table	= pmac_ide_macio_match,
+	.driver = {
+		.name 		= "ide-pmac",
+		.owner		= THIS_MODULE,
+		.of_match_table	= pmac_ide_macio_match,
+	},
 	.probe		= pmac_ide_macio_attach,
 	.suspend	= pmac_ide_macio_suspend,
 	.resume		= pmac_ide_macio_resume,
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 54f0fb4cd5d..03d202b1ff2 100755
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -231,7 +231,7 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
 
 	stop_critical_timings();
 #ifndef MODULE
-	trace_power_start(POWER_CSTATE, (eax >> 4) + 1);
+	trace_power_start(POWER_CSTATE, (eax >> 4) + 1, cpu);
 #endif
 	if (!need_resched()) {
 
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 8b693c8c25e..8c9b483a0d9 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -969,7 +969,8 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
 		goto err;
 	goto out;
 err:
-	abort_connection(ep, skb, GFP_KERNEL);
+	state_set(&ep->com, ABORTING);
+	send_abort(ep, skb, GFP_KERNEL);
 out:
 	connect_reply_upcall(ep, err);
 	return;
@@ -1372,7 +1373,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 				    pdev, 0);
 		mtu = pdev->mtu;
 		tx_chan = cxgb4_port_chan(pdev);
-		smac_idx = tx_chan << 1;
+		smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(pdev) * step;
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1383,7 +1384,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 					dst->neighbour->dev, 0);
 		mtu = dst_mtu(dst);
 		tx_chan = cxgb4_port_chan(dst->neighbour->dev);
-		smac_idx = tx_chan << 1;
+		smac_idx = (cxgb4_port_viid(dst->neighbour->dev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(dst->neighbour->dev) * step;
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1950,7 +1951,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 					pdev, 0);
 		ep->mtu = pdev->mtu;
 		ep->tx_chan = cxgb4_port_chan(pdev);
-		ep->smac_idx = ep->tx_chan << 1;
+		ep->smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
 		step = ep->com.dev->rdev.lldi.ntxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->txq_idx = cxgb4_port_idx(pdev) * step;
@@ -1965,7 +1966,8 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 					ep->dst->neighbour->dev, 0);
 		ep->mtu = dst_mtu(ep->dst);
 		ep->tx_chan = cxgb4_port_chan(ep->dst->neighbour->dev);
-		ep->smac_idx = ep->tx_chan << 1;
+		ep->smac_idx = (cxgb4_port_viid(ep->dst->neighbour->dev) &
+				0x7F) << 1;
 		step = ep->com.dev->rdev.lldi.ntxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->txq_idx = cxgb4_port_idx(ep->dst->neighbour->dev) * step;
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 2447f529548..fac5c6e6801 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -77,7 +77,7 @@ static int destroy_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 	kfree(cq->sw_queue);
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  cq->memsize, cq->queue,
-			  pci_unmap_addr(cq, mapping));
+			  dma_unmap_addr(cq, mapping));
 	c4iw_put_cqid(rdev, cq->cqid, uctx);
 	return ret;
 }
@@ -112,7 +112,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 		ret = -ENOMEM;
 		goto err3;
 	}
-	pci_unmap_addr_set(cq, mapping, cq->dma_addr);
+	dma_unmap_addr_set(cq, mapping, cq->dma_addr);
 	memset(cq->queue, 0, cq->memsize);
 
 	/* build fw_ri_res_wr */
@@ -179,7 +179,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 	return 0;
 err4:
 	dma_free_coherent(&rdev->lldi.pdev->dev, cq->memsize, cq->queue,
-			  pci_unmap_addr(cq, mapping));
+			  dma_unmap_addr(cq, mapping));
 err3:
 	kfree(cq->sw_queue);
 err2:
@@ -764,7 +764,7 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries,
 	struct c4iw_create_cq_resp uresp;
 	struct c4iw_ucontext *ucontext = NULL;
 	int ret;
-	size_t memsize;
+	size_t memsize, hwentries;
 	struct c4iw_mm_entry *mm, *mm2;
 
 	PDBG("%s ib_dev %p entries %d\n", __func__, ibdev, entries);
@@ -788,14 +788,29 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries,
 	 * entries must be multiple of 16 for HW.
 	 */
 	entries = roundup(entries, 16);
-	memsize = entries * sizeof *chp->cq.queue;
+
+	/*
+	 * Make actual HW queue 2x to avoid cdix_inc overflows.
+	 */
+	hwentries = entries * 2;
+
+	/*
+	 * Make HW queue at least 64 entries so GTS updates aren't too
+	 * frequent.
+	 */
+	if (hwentries < 64)
+		hwentries = 64;
+
+	memsize = hwentries * sizeof *chp->cq.queue;
 
 	/*
 	 * memsize must be a multiple of the page size if its a user cq.
 	 */
-	if (ucontext)
+	if (ucontext) {
 		memsize = roundup(memsize, PAGE_SIZE);
-	chp->cq.size = entries;
+		hwentries = memsize / sizeof *chp->cq.queue;
+	}
+	chp->cq.size = hwentries;
 	chp->cq.memsize = memsize;
 
 	ret = create_cq(&rhp->rdev, &chp->cq,
@@ -805,7 +820,7 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries,
 
 	chp->rhp = rhp;
 	chp->cq.size--;				/* status page */
-	chp->ibcq.cqe = chp->cq.size - 1;
+	chp->ibcq.cqe = entries - 2;
 	spin_lock_init(&chp->lock);
 	atomic_set(&chp->refcnt, 1);
 	init_waitqueue_head(&chp->wait);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 277ab589b44..d33e1a66881 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -261,7 +261,7 @@ static inline struct c4iw_mw *to_c4iw_mw(struct ib_mw *ibmw)
 
 struct c4iw_fr_page_list {
 	struct ib_fast_reg_page_list ibpl;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	dma_addr_t dma_addr;
 	struct c4iw_dev *dev;
 	int size;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 7f94da1a243..82b5703b894 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -764,7 +764,7 @@ struct ib_fast_reg_page_list *c4iw_alloc_fastreg_pbl(struct ib_device *device,
 	if (!c4pl)
 		return ERR_PTR(-ENOMEM);
 
-	pci_unmap_addr_set(c4pl, mapping, dma_addr);
+	dma_unmap_addr_set(c4pl, mapping, dma_addr);
 	c4pl->dma_addr = dma_addr;
 	c4pl->dev = dev;
 	c4pl->size = size;
@@ -779,7 +779,7 @@ void c4iw_free_fastreg_pbl(struct ib_fast_reg_page_list *ibpl)
 	struct c4iw_fr_page_list *c4pl = to_c4iw_fr_page_list(ibpl);
 
 	dma_free_coherent(&c4pl->dev->rdev.lldi.pdev->dev, c4pl->size,
-			  c4pl, pci_unmap_addr(c4pl, mapping));
+			  c4pl, dma_unmap_addr(c4pl, mapping));
 }
 
 int c4iw_dereg_mr(struct ib_mr *ib_mr)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 0c28ed1eafa..7065cb31055 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -40,10 +40,10 @@ static int destroy_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	 */
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->rq.memsize, wq->rq.queue,
-			  pci_unmap_addr(&wq->rq, mapping));
+			  dma_unmap_addr(&wq->rq, mapping));
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->sq.memsize, wq->sq.queue,
-			  pci_unmap_addr(&wq->sq, mapping));
+			  dma_unmap_addr(&wq->sq, mapping));
 	c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
 	kfree(wq->rq.sw_rq);
 	kfree(wq->sq.sw_sq);
@@ -99,7 +99,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	if (!wq->sq.queue)
 		goto err5;
 	memset(wq->sq.queue, 0, wq->sq.memsize);
-	pci_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
+	dma_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
 
 	wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
 					  wq->rq.memsize, &(wq->rq.dma_addr),
@@ -112,7 +112,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 		wq->rq.queue,
 		(unsigned long long)virt_to_phys(wq->rq.queue));
 	memset(wq->rq.queue, 0, wq->rq.memsize);
-	pci_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
+	dma_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
 
 	wq->db = rdev->lldi.db_reg;
 	wq->gts = rdev->lldi.gts_reg;
@@ -217,11 +217,11 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 err7:
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->rq.memsize, wq->rq.queue,
-			  pci_unmap_addr(&wq->rq, mapping));
+			  dma_unmap_addr(&wq->rq, mapping));
 err6:
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->sq.memsize, wq->sq.queue,
-			  pci_unmap_addr(&wq->sq, mapping));
+			  dma_unmap_addr(&wq->sq, mapping));
 err5:
 	c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
 err4:
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 1057cb96302..9cf8d85bfcf 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -279,7 +279,7 @@ struct t4_swsqe {
 struct t4_sq {
 	union t4_wr *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swsqe *sw_sq;
 	struct t4_swsqe *oldest_read;
 	u64 udb;
@@ -298,7 +298,7 @@ struct t4_swrqe {
 struct t4_rq {
 	union  t4_recv_wr *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swrqe *sw_rq;
 	u64 udb;
 	size_t memsize;
@@ -429,7 +429,7 @@ static inline int t4_wq_db_enabled(struct t4_wq *wq)
 struct t4_cq {
 	struct t4_cqe *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_cqe *sw_queue;
 	void __iomem *gts;
 	struct c4iw_rdev *rdev;
diff --git a/drivers/infiniband/hw/qib/Makefile b/drivers/infiniband/hw/qib/Makefile
index c6515a1b9a6..f12d7bb8b39 100644
--- a/drivers/infiniband/hw/qib/Makefile
+++ b/drivers/infiniband/hw/qib/Makefile
@@ -6,7 +6,7 @@ ib_qib-y := qib_cq.o qib_diag.o qib_dma.o qib_driver.o qib_eeprom.o \
 	qib_qp.o qib_qsfp.o qib_rc.o qib_ruc.o qib_sdma.o qib_srq.o \
 	qib_sysfs.o qib_twsi.o qib_tx.o qib_uc.o qib_ud.o \
 	qib_user_pages.o qib_user_sdma.o qib_verbs_mcast.o qib_iba7220.o \
-	qib_sd7220.o qib_sd7220_img.o qib_iba7322.o qib_verbs.o
+	qib_sd7220.o qib_iba7322.o qib_verbs.o
 
 # 6120 has no fallback if no MSI interrupts, others can do INTx
 ib_qib-$(CONFIG_PCI_MSI) += qib_iba6120.o
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 32d9208efcf..3593983df7b 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -686,6 +686,7 @@ struct qib_devdata {
 	void __iomem *piobase;
 	/* mem-mapped pointer to base of user chip regs (if using WC PAT) */
 	u64 __iomem *userbase;
+	void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
 	/*
 	 * points to area where PIOavail registers will be DMA'ed.
 	 * Has to be on a page of it's own, because the page will be
diff --git a/drivers/infiniband/hw/qib/qib_7220.h b/drivers/infiniband/hw/qib/qib_7220.h
index ea0bfd896f9..21f374aa063 100644
--- a/drivers/infiniband/hw/qib/qib_7220.h
+++ b/drivers/infiniband/hw/qib/qib_7220.h
@@ -109,10 +109,6 @@ struct qib_chippport_specific {
  */
 int qib_sd7220_presets(struct qib_devdata *dd);
 int qib_sd7220_init(struct qib_devdata *dd);
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum, u8 *img,
-		       int len, int offset);
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum, const u8 *img,
-			int len, int offset);
 void qib_sd7220_clr_ibpar(struct qib_devdata *);
 /*
  * Below used for sdnum parameter, selecting one of the two sections
@@ -121,9 +117,6 @@ void qib_sd7220_clr_ibpar(struct qib_devdata *);
  */
 #define IB_7220_SERDES 2
 
-int qib_sd7220_ib_load(struct qib_devdata *dd);
-int qib_sd7220_ib_vfy(struct qib_devdata *dd);
-
 static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
 				  const u16 regno)
 {
diff --git a/drivers/infiniband/hw/qib/qib_7322_regs.h b/drivers/infiniband/hw/qib/qib_7322_regs.h
index a97440ba924..32dc81ff8d4 100644
--- a/drivers/infiniband/hw/qib/qib_7322_regs.h
+++ b/drivers/infiniband/hw/qib/qib_7322_regs.h
@@ -742,15 +742,15 @@
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_LSB 0xF
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_MSB 0xF
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_LSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_MSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_RMASK 0x1
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_LSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_MSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_RMASK 0x1
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_LSB 0xD
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_MSB 0xD
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_LSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_MSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_RMASK 0x1
+#define QIB_7322_HwErrMask_statusValidNoEopMask_LSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_MSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_RMASK 0x1
 #define QIB_7322_HwErrMask_LATriggeredMask_LSB 0xB
 #define QIB_7322_HwErrMask_LATriggeredMask_MSB 0xB
 #define QIB_7322_HwErrMask_LATriggeredMask_RMASK 0x1
@@ -796,15 +796,15 @@
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_LSB 0xF
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_MSB 0xF
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_RMASK 0x1
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_LSB 0xD
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_MSB 0xD
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwErrStatus_statusValidNoEop_LSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_MSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_RMASK 0x1
 #define QIB_7322_HwErrStatus_LATriggered_LSB 0xB
 #define QIB_7322_HwErrStatus_LATriggered_MSB 0xB
 #define QIB_7322_HwErrStatus_LATriggered_RMASK 0x1
@@ -850,15 +850,15 @@
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_LSB 0xF
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_MSB 0xF
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_LSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_MSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_RMASK 0x1
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_LSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_MSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_RMASK 0x1
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_LSB 0xD
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_MSB 0xD
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_LSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_MSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_RMASK 0x1
+#define QIB_7322_HwErrClear_statusValidNoEopClear_LSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_MSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_RMASK 0x1
 #define QIB_7322_HwErrClear_LATriggeredClear_LSB 0xB
 #define QIB_7322_HwErrClear_LATriggeredClear_MSB 0xB
 #define QIB_7322_HwErrClear_LATriggeredClear_RMASK 0x1
@@ -880,15 +880,15 @@
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_LSB 0xF
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_MSB 0xF
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_RMASK 0x1
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_LSB 0xD
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_MSB 0xD
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_LSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_MSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_RMASK 0x1
 
 #define QIB_7322_EXTStatus_OFFS 0xC0
 #define QIB_7322_EXTStatus_DEF 0x000000000000X000
diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
index ca98dd52375..05dcf0d9a7d 100644
--- a/drivers/infiniband/hw/qib/qib_diag.c
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -233,6 +233,7 @@ static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
 	u32 __iomem *krb32 = (u32 __iomem *)dd->kregbase;
 	u32 __iomem *map = NULL;
 	u32 cnt = 0;
+	u32 tot4k, offs4k;
 
 	/* First, simplest case, offset is within the first map. */
 	kreglen = (dd->kregend - dd->kregbase) * sizeof(u64);
@@ -250,7 +251,8 @@ static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
 	if (dd->userbase) {
 		/* If user regs mapped, they are after send, so set limit. */
 		u32 ulim = (dd->cfgctxts * dd->ureg_align) + dd->uregbase;
-		snd_lim = dd->uregbase;
+		if (!dd->piovl15base)
+			snd_lim = dd->uregbase;
 		krb32 = (u32 __iomem *)dd->userbase;
 		if (offset >= dd->uregbase && offset < ulim) {
 			map = krb32 + (offset - dd->uregbase) / sizeof(u32);
@@ -277,14 +279,14 @@ static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
 	/* If 4k buffers exist, account for them by bumping
 	 * appropriate limit.
 	 */
+	tot4k = dd->piobcnt4k * dd->align4k;
+	offs4k = dd->piobufbase >> 32;
 	if (dd->piobcnt4k) {
-		u32 tot4k = dd->piobcnt4k * dd->align4k;
-		u32 offs4k = dd->piobufbase >> 32;
 		if (snd_bottom > offs4k)
 			snd_bottom = offs4k;
 		else {
 			/* 4k above 2k. Bump snd_lim, if needed*/
-			if (!dd->userbase)
+			if (!dd->userbase || dd->piovl15base)
 				snd_lim = offs4k + tot4k;
 		}
 	}
@@ -298,6 +300,15 @@ static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
 		cnt = snd_lim - offset;
 	}
 
+	if (!map && offs4k && dd->piovl15base) {
+		snd_lim = offs4k + tot4k + 2 * dd->align4k;
+		if (offset >= (offs4k + tot4k) && offset < snd_lim) {
+			map = (u32 __iomem *)dd->piovl15base +
+				((offset - (offs4k + tot4k)) / sizeof(u32));
+			cnt = snd_lim - offset;
+		}
+	}
+
 mapped:
 	if (cntp)
 		*cntp = cnt;
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index edef8527eb3..844954bf417 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -542,10 +542,8 @@ static int qibfs_fill_super(struct super_block *sb, void *data, int silent)
 	list_for_each_entry_safe(dd, tmp, &qib_dev_list, list) {
 		spin_unlock_irqrestore(&qib_devs_lock, flags);
 		ret = add_cntr_files(sb, dd);
-		if (ret) {
-			deactivate_super(sb);
+		if (ret)
 			goto bail;
-		}
 		spin_lock_irqsave(&qib_devs_lock, flags);
 	}
 
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 1eadadc13da..a5e29dbb953 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1355,8 +1355,7 @@ static int qib_6120_bringup_serdes(struct qib_pportdata *ppd)
 	hwstat = qib_read_kreg64(dd, kr_hwerrstatus);
 	if (hwstat) {
 		/* should just have PLL, clear all set, in an case */
-		if (hwstat & ~QLOGIC_IB_HWE_SERDESPLLFAILED)
-			qib_write_kreg(dd, kr_hwerrclear, hwstat);
+		qib_write_kreg(dd, kr_hwerrclear, hwstat);
 		qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr));
 	}
 
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 503992d9c5c..5eedf83e2c3 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -543,7 +543,7 @@ struct vendor_txdds_ent {
 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
 
 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
-#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */
+#define TXDDS_EXTRA_SZ 13 /* number of extra tx settings entries */
 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
 
 #define H1_FORCE_VAL 8
@@ -1100,9 +1100,9 @@ static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = {
 	HWE_AUTO_P(SDmaMemReadErr, 1),
 	HWE_AUTO_P(SDmaMemReadErr, 0),
 	HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
+	HWE_AUTO_P(IBCBusToSPCParityErr, 1),
 	HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
-	HWE_AUTO_P(statusValidNoEop, 1),
-	HWE_AUTO_P(statusValidNoEop, 0),
+	HWE_AUTO(statusValidNoEop),
 	HWE_AUTO(LATriggered),
 	{ .mask = 0 }
 };
@@ -4763,6 +4763,8 @@ static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd)
 		SYM_MASK(IBPCSConfig_0, tx_rx_reset);
 
 	val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
+	qib_write_kreg(dd, kr_hwerrmask,
+		       dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop));
 	qib_write_kreg_port(ppd, krp_ibcctrl_a,
 			    ppd->cpspec->ibcctrl_a &
 			    ~SYM_MASK(IBCCtrlA_0, IBLinkEn));
@@ -4772,6 +4774,9 @@ static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd)
 	qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
 	qib_write_kreg(dd, kr_scratch, 0ULL);
+	qib_write_kreg(dd, kr_hwerrclear,
+		       SYM_MASK(HwErrClear, statusValidNoEopClear));
+	qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
 }
 
 /*
@@ -5624,6 +5629,8 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
 			if (ppd->port != port || !ppd->link_speed_supported)
 				continue;
 			ppd->cpspec->no_eep = val;
+			if (seth1)
+				ppd->cpspec->h1_val = h1;
 			/* now change the IBC and serdes, overriding generic */
 			init_txdds_table(ppd, 1);
 			any++;
@@ -6064,9 +6071,9 @@ static int qib_init_7322_variables(struct qib_devdata *dd)
 		 * the "cable info" setup here.  Can be overridden
 		 * in adapter-specific routines.
 		 */
-		if (!(ppd->dd->flags & QIB_HAS_QSFP)) {
-			if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd))
-				qib_devinfo(ppd->dd->pcidev, "IB%u:%u: "
+		if (!(dd->flags & QIB_HAS_QSFP)) {
+			if (!IS_QMH(dd) && !IS_QME(dd))
+				qib_devinfo(dd->pcidev, "IB%u:%u: "
 					    "Unknown mezzanine card type\n",
 					    dd->unit, ppd->port);
 			cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
@@ -6119,9 +6126,25 @@ static int qib_init_7322_variables(struct qib_devdata *dd)
 	qib_set_ctxtcnt(dd);
 
 	if (qib_wc_pat) {
-		ret = init_chip_wc_pat(dd, NUM_VL15_BUFS * dd->align4k);
+		resource_size_t vl15off;
+		/*
+		 * We do not set WC on the VL15 buffers to avoid
+		 * a rare problem with unaligned writes from
+		 * interrupt-flushed store buffers, so we need
+		 * to map those separately here.  We can't solve
+		 * this for the rarely used mtrr case.
+		 */
+		ret = init_chip_wc_pat(dd, 0);
 		if (ret)
 			goto bail;
+
+		/* vl15 buffers start just after the 4k buffers */
+		vl15off = dd->physaddr + (dd->piobufbase >> 32) +
+			dd->piobcnt4k * dd->align4k;
+		dd->piovl15base	= ioremap_nocache(vl15off,
+						  NUM_VL15_BUFS * dd->align4k);
+		if (!dd->piovl15base)
+			goto bail;
 	}
 	qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
 
@@ -6932,6 +6955,8 @@ static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
+	{  0, 0, 0,  3 },	/* QMH7342 backplane settings */
+	{  0, 0, 0,  4 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
@@ -6947,6 +6972,8 @@ static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
+	{  0, 0, 0,  9 },	/* QMH7342 backplane settings */
+	{  0, 0, 0, 10 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
@@ -6962,6 +6989,8 @@ static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
 	{  0, 1, 12,  6 },	/* QME7342 backplane setting */
 	{  0, 1, 12,  7 },	/* QME7342 backplane setting */
 	{  0, 1, 12,  8 },	/* QME7342 backplane setting */
+	{  0, 1,  0, 10 },	/* QMH7342 backplane settings */
+	{  0, 1,  0, 12 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index 9b40f345ac3..a873dd596e8 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -1059,7 +1059,7 @@ static int __init qlogic_ib_init(void)
 		goto bail_dev;
 	}
 
-	qib_cq_wq = create_workqueue("qib_cq");
+	qib_cq_wq = create_singlethread_workqueue("qib_cq");
 	if (!qib_cq_wq) {
 		ret = -ENOMEM;
 		goto bail_wq;
@@ -1289,8 +1289,18 @@ static int __devinit qib_init_one(struct pci_dev *pdev,
 
 	if (qib_mini_init || initfail || ret) {
 		qib_stop_timers(dd);
+		flush_scheduled_work();
 		for (pidx = 0; pidx < dd->num_pports; ++pidx)
 			dd->f_quiet_serdes(dd->pport + pidx);
+		if (qib_mini_init)
+			goto bail;
+		if (!j) {
+			(void) qibfs_remove(dd);
+			qib_device_remove(dd);
+		}
+		if (!ret)
+			qib_unregister_ib_device(dd);
+		qib_postinit_cleanup(dd);
 		if (initfail)
 			ret = initfail;
 		goto bail;
@@ -1472,6 +1482,9 @@ int qib_setup_eagerbufs(struct qib_ctxtdata *rcd)
 		dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
 		unsigned i;
 
+		/* clear for security and sanity on each use */
+		memset(rcd->rcvegrbuf[chunk], 0, size);
+
 		for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
 			dd->f_put_tid(dd, e + egroff +
 					  (u64 __iomem *)
@@ -1499,6 +1512,12 @@ bail:
 	return -ENOMEM;
 }
 
+/*
+ * Note: Changes to this routine should be mirrored
+ * for the diagnostics routine qib_remap_ioaddr32().
+ * There is also related code for VL15 buffers in qib_init_7322_variables().
+ * The teardown code that unmaps is in qib_pcie_ddcleanup()
+ */
 int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
 {
 	u64 __iomem *qib_kregbase = NULL;
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c926bf4541d..7fa6e559263 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -179,6 +179,8 @@ void qib_pcie_ddcleanup(struct qib_devdata *dd)
 		iounmap(dd->piobase);
 	if (dd->userbase)
 		iounmap(dd->userbase);
+	if (dd->piovl15base)
+		iounmap(dd->piovl15base);
 
 	pci_disable_device(dd->pcidev);
 	pci_release_regions(dd->pcidev);
diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c
index 0aeed0e74cb..e9f9f8bc320 100644
--- a/drivers/infiniband/hw/qib/qib_sd7220.c
+++ b/drivers/infiniband/hw/qib/qib_sd7220.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
@@ -37,10 +38,14 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/firmware.h>
 
 #include "qib.h"
 #include "qib_7220.h"
 
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
+MODULE_FIRMWARE(SD7220_FW_NAME);
+
 /*
  * Same as in qib_iba7220.c, but just the registers needed here.
  * Could move whole set to qib_7220.h, but decided better to keep
@@ -102,6 +107,10 @@ static int qib_internal_presets(struct qib_devdata *dd);
 /* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */
 static int qib_sd_trimself(struct qib_devdata *dd, int val);
 static int epb_access(struct qib_devdata *dd, int sdnum, int claim);
+static int qib_sd7220_ib_load(struct qib_devdata *dd,
+			      const struct firmware *fw);
+static int qib_sd7220_ib_vfy(struct qib_devdata *dd,
+			     const struct firmware *fw);
 
 /*
  * Below keeps track of whether the "once per power-on" initialization has
@@ -110,10 +119,13 @@ static int epb_access(struct qib_devdata *dd, int sdnum, int claim);
  * state of the reset "pin", is no longer valid. Instead, we check for the
  * actual uC code having been loaded.
  */
-static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd)
+static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd,
+				 const struct firmware *fw)
 {
 	struct qib_devdata *dd = ppd->dd;
-	if (!dd->cspec->serdes_first_init_done && (qib_sd7220_ib_vfy(dd) > 0))
+
+	if (!dd->cspec->serdes_first_init_done &&
+	    qib_sd7220_ib_vfy(dd, fw) > 0)
 		dd->cspec->serdes_first_init_done = 1;
 	return dd->cspec->serdes_first_init_done;
 }
@@ -377,6 +389,7 @@ static void qib_sd_trimdone_monitor(struct qib_devdata *dd,
  */
 int qib_sd7220_init(struct qib_devdata *dd)
 {
+	const struct firmware *fw;
 	int ret = 1; /* default to failure */
 	int first_reset, was_reset;
 
@@ -387,8 +400,15 @@ int qib_sd7220_init(struct qib_devdata *dd)
 		qib_ibsd_reset(dd, 1);
 		qib_sd_trimdone_monitor(dd, "Driver-reload");
 	}
+
+	ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev);
+	if (ret) {
+		qib_dev_err(dd, "Failed to load IB SERDES image\n");
+		goto done;
+	}
+
 	/* Substitute our deduced value for was_reset */
-	ret = qib_ibsd_ucode_loaded(dd->pport);
+	ret = qib_ibsd_ucode_loaded(dd->pport, fw);
 	if (ret < 0)
 		goto bail;
 
@@ -437,13 +457,13 @@ int qib_sd7220_init(struct qib_devdata *dd)
 		int vfy;
 		int trim_done;
 
-		ret = qib_sd7220_ib_load(dd);
+		ret = qib_sd7220_ib_load(dd, fw);
 		if (ret < 0) {
 			qib_dev_err(dd, "Failed to load IB SERDES image\n");
 			goto bail;
 		} else {
 			/* Loaded image, try to verify */
-			vfy = qib_sd7220_ib_vfy(dd);
+			vfy = qib_sd7220_ib_vfy(dd, fw);
 			if (vfy != ret) {
 				qib_dev_err(dd, "SERDES PRAM VFY failed\n");
 				goto bail;
@@ -506,6 +526,8 @@ bail:
 done:
 	/* start relock timer regardless, but start at 1 second */
 	set_7220_relock_poll(dd, -1);
+
+	release_firmware(fw);
 	return ret;
 }
 
@@ -829,8 +851,8 @@ static int qib_sd7220_ram_xfer(struct qib_devdata *dd, int sdnum, u32 loc,
 
 #define PROG_CHUNK 64
 
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
-		       u8 *img, int len, int offset)
+static int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
+			      const u8 *img, int len, int offset)
 {
 	int cnt, sofar, req;
 
@@ -840,7 +862,7 @@ int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
 		if (req > PROG_CHUNK)
 			req = PROG_CHUNK;
 		cnt = qib_sd7220_ram_xfer(dd, sdnum, offset + sofar,
-					  img + sofar, req, 0);
+					  (u8 *)img + sofar, req, 0);
 		if (cnt < req) {
 			sofar = -1;
 			break;
@@ -853,8 +875,8 @@ int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
 #define VFY_CHUNK 64
 #define SD_PRAM_ERROR_LIMIT 42
 
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
-			const u8 *img, int len, int offset)
+static int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
+			       const u8 *img, int len, int offset)
 {
 	int cnt, sofar, req, idx, errors;
 	unsigned char readback[VFY_CHUNK];
@@ -881,6 +903,18 @@ int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
 	return errors ? -errors : sofar;
 }
 
+static int
+qib_sd7220_ib_load(struct qib_devdata *dd, const struct firmware *fw)
+{
+	return qib_sd7220_prog_ld(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
+static int
+qib_sd7220_ib_vfy(struct qib_devdata *dd, const struct firmware *fw)
+{
+	return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
 /*
  * IRQ not set up at this point in init, so we poll.
  */
diff --git a/drivers/infiniband/hw/qib/qib_sd7220_img.c b/drivers/infiniband/hw/qib/qib_sd7220_img.c
deleted file mode 100644
index a1118fbd237..00000000000
--- a/drivers/infiniband/hw/qib/qib_sd7220_img.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains the memory image from the vendor, to be copied into
- * the IB SERDES of the IBA7220 during initialization.
- * The file also includes the two functions which use this image.
- */
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "qib.h"
-#include "qib_7220.h"
-
-static unsigned char qib_sd7220_ib_img[] = {
-/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6,
-	0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01,
-	0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08,
-/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08,
-	0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2,
-/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7,
-	0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00,
-/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75,
-	0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5,
-/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38,
-	0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94,
-/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36,
-	0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74,
-/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90,
-	0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20,
-/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3,
-	0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12,
-/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04,
-	0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09,
-/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00,
-	0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2,
-/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09,
-	0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83,
-	0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3,
-/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0,
-	0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03,
-/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4,
-	0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E,
-/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82,
-	0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44,
-/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40,
-	0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54,
-/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-	0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08,
-/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF,
-	0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40,
-/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75,
-	0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E,
-/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD,
-	0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81,
-/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED,
-	0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF,
-/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0,
-	0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12,
-/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32,
-	0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74,
-/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83,
-	0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0,
-/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19,
-	0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE,
-/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03,
-	0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0,
-/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83,
-	0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12,
-/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3,
-	0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A,
-/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF,
-	0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19,
-/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30,
-	0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C,
-	0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60,
-/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44,
-	0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02,
-/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7,
-	0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0,
-/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04,
-	0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01,
-/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40,
-	0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12,
-/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32,
-	0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0,
-	0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5,
-/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40,
-	0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07,
-/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F,
-	0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D,
-/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A,
-	0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74,
-/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12,
-	0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90,
-/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE,
-	0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5,
-/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02,
-	0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82,
-/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A,
-	0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04,
-/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82,
-	0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A,
-/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04,
-	0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82,
-/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92,
-	0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A,
-/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2,
-	0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F,
-/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20,
-	0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12,
-/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30,
-	0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06,
-/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D,
-	0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0,
-/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43,
-	0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04,
-/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A,
-	0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
-	0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17,
-/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44,
-	0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12,
-/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12,
-	0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74,
-/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0,
-	0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44,
-/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07,
-	0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE,
-/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12,
-	0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10,
-/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12,
-	0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF,
-/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30,
-	0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B,
-	0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5,
-/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09,
-	0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82,
-/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F,
-	0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3,
-/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02,
-	0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E,
-/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09,
-	0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1,
-/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B,
-	0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75,
-/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73,
-	0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0,
-/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47,
-	0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F,
-/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07,
-	0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80,
-/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74,
-	0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F,
-/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83,
-	0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08,
-/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12,
-	0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B,
-/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36,
-	0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12,
-	0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0,
-/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5,
-	0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33,
-/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4,
-	0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4,
-/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E,
-	0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12,
-/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF,
-	0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D,
-/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02,
-	0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01,
-/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06,
-	0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF,
-/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80,
-	0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04,
-/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E,
-	0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5,
-/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60,
-	0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46,
-/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76,
-	0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F,
-/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95,
-	0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5,
-/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01,
-	0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80,
-/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95,
-	0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-	0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F,
-/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46,
-	0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75,
-/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E,
-	0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5,
-/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5,
-	0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F,
-/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5,
-	0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5,
-/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04,
-	0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80,
-/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F,
-	0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5,
-/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D,
-	0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70,
-/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5,
-	0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C,
-/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E,
-	0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79,
-/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85,
-	0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50,
-/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78,
-	0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30,
-/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E,
-	0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19,
-/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-	0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F,
-	0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14,
-/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19,
-	0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75,
-	0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C,
-/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E,
-	0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80,
-/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5,
-	0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB,
-	0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0,
-/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44,
-	0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0,
-/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA,
-	0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC,
-/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5,
-	0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0,
-/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83,
-	0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44,
-/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54,
-	0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3,
-	0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42,
-/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74,
-	0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5,
-/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5,
-	0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5,
-/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C,
-	0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80,
-/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22,
-	0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5,
-/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07,
-	0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C,
-/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44,
-	0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85,
-/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A,
-	0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E,
-/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED,
-	0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22,
-/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02,
-	0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11,
-/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22,
-	0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11,
-	0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-	0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11,
-/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-	0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5,
-	0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF,
-/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-	0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5,
-/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25,
-	0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-	0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25,
-/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83,
-	0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD,
-	0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41,
-/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22,
-	0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00,
-/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-	0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5,
-/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42,
-	0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C,
-/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75,
-	0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3,
-/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E,
-	0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5,
-/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00,
-	0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5,
-/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07,
-	0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95,
-/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4,
-	0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0,
-/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-	0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82,
-/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4,
-	0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41,
-/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60,
-	0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37,
-/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD,
-	0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28,
-/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8,
-	0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F,
-/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0,
-	0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54,
-/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF,
-	0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26,
-/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4,
-	0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89,
-/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12,
-	0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08,
-/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24,
-	0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12,
-/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E,
-	0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01,
-	0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78,
-/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF,
-	0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0,
-/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07,
-	0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF,
-/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24,
-	0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC,
-	0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12,
-/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08,
-	0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4,
-/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08,
-	0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41,
-/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0,
-	0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D,
-/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0,
-	0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4,
-/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5,
-	0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5,
-/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6,
-	0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78,
-/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE,
-	0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8,
-/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5,
-	0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1,
-/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00,
-	0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3,
-/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43,
-	0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83,
-/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0,
-	0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0,
-/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55,
-	0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6,
-/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3,
-	0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33,
-/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40,
-	0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF,
-/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10,
-	0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E,
-/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F,
-	0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93,
-/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25,
-	0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C,
-/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4,
-	0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D,
-/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66,
-	0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90,
-/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4,
-	0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12,
-/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8,
-	0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12,
-/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05,
-	0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55,
-/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70,
-	0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5,
-/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
-	0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12,
-/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-	0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12,
-/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12,
-	0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E,
-/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44,
-	0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3,
-/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68,
-	0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14,
-/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA,
-	0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74,
-/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80,
-	0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5,
-/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95,
-	0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70,
-/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12,
-	0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80,
-/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D,
-	0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85,
-/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F,
-	0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07,
-/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5,
-	0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F,
-/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12,
-	0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12,
-/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C,
-	0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38,
-/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80,
-	0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08,
-/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D,
-	0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39,
-/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38,
-	0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F,
-/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12,
-	0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A,
-/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12,
-	0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5,
-/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75,
-	0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12,
-/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0,
-	0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06,
-/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5,
-	0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13,
-/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09,
-	0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40,
-/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E,
-	0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
-	0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F,
-/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5,
-/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80,
-	0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0,
-/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74,
-	0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17,
-/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07,
-	0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90,
-/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44,
-	0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54,
-/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F,
-	0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07,
-/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82,
-	0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED,
-/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF,
-	0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54,
-/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91,
-	0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30,
-/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92,
-	0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4,
-/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75,
-	0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A,
-/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0,
-	0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E,
-/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E,
-	0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0,
-/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75,
-	0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75,
-/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07,
-	0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10,
-/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF,
-	0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82,
-/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5,
-	0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75,
-/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44,
-	0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0,
-	0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34,
-/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22,
-	0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1,
-/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25,
-	0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4,
-/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85,
-	0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0,
-/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00,
-	0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00,
-/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22,
-	0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5,
-/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30,
-	0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC,
-/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B,
-	0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28,
-/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07,
-	0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24,
-/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70,
-	0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07,
-/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0,
-	0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12,
-/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41,
-	0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12,
-/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04,
-	0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64,
-/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07,
-/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07,
-	0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF,
-/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0,
-	0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0,
-	0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07,
-/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12,
-	0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E,
-	0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70,
-/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43,
-	0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10,
-/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-	0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52,
-/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08,
-	0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B,
-/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00,
-	0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12,
-	0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51,
-/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1,
-	0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1,
-/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80,
-	0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01,
-/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40,
-	0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12,
-	0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22,
-/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10,
-	0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12,
-	0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10,
-/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12,
-	0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0,
-/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07,
-	0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07,
-/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00,
-	0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90,
-	0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56,
-/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12,
-	0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5,
-/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA,
-	0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12,
-/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F,
-	0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22,
-/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74,
-	0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57,
-/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01,
-	0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04,
-/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4,
-	0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0,
-/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94,
-	0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12,
-/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5,
-	0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5,
-/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56,
-	0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80,
-/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40,
-	0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22,
-/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93,
-	0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5,
-/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22,
-	0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5,
-/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93,
-	0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6,
-/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED,
-	0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5,
-/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01,
-	0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00,
-/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D,
-	0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01,
-/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12,
-	0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4,
-/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85,
-	0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5,
-/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07,
-	0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12,
-/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E,
-	0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45,
-/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08,
-	0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00,
-/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5,
-	0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05,
-/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC,
-	0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11,
-/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0,
-	0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE,
-/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58,
-/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75,
-	0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75,
-/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08,
-	0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF,
-/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90,
-	0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35,
-/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF,
-	0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45,
-/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-	0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E,
-/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60,
-	0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5,
-/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE,
-	0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58,
-/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12,
-	0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00,
-/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07,
-	0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B,
-/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12,
-	0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12,
-/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64,
-	0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E,
-/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95,
-	0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40,
-/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05,
-	0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39,
-/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12,
-	0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B,
-/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07,
-	0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F,
-/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5,
-	0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C,
-/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39,
-	0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12,
-/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5,
-	0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38,
-/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C,
-	0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C,
-/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09,
-	0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40,
-/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E,
-	0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38,
-/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80,
-	0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07,
-/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F,
-	0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63,
-/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12,
-	0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5,
-/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38,
-	0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60,
-/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39,
-	0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C,
-/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12,
-	0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5,
-/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08,
-	0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15,
-/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17,
-	0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80,
-/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94,
-	0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31,
-/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15,
-	0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01,
-/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04,
-	0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A,
-/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77,
-	0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15,
-/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04,
-	0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15,
-/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E,
-	0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22,
-/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15,
-	0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A,
-/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29,
-	0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13,
-/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24,
-	0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63,
-/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6,
-	0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22,
-/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3,
-	0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5,
-/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74,
-	0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74,
-/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20,
-	0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8,
-/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44,
-	0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF,
-/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6,
-	0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3,
-/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E,
-	0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A,
-/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5,
-	0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3,
-/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07,
-	0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70,
-/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5,
-/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5,
-/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80,
-/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF,
-	0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12,
-/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D,
-	0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02,
-/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B,
-	0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B,
-/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B,
-	0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5,
-/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60,
-	0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12,
-/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E,
-	0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6,
-/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8,
-	0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA,
-/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5,
-	0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80,
-/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5,
-	0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4,
-/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29,
-	0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F,
-/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E,
-	0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B,
-/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11,
-	0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12,
-/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A,
-	0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5,
-/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13,
-	0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3,
-/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12,
-	0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE,
-/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19,
-	0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E,
-/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D,
-/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12,
-	0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94,
-/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83,
-	0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0,
-/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-	0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F,
-	0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75,
-/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21,
-	0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44,
-/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF,
-	0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75,
-/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29,
-	0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07,
-/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12,
-	0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10,
-/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44,
-	0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0,
-/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12,
-	0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58,
-/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC,
-	0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2,
-	0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4,
-/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12,
-	0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07,
-/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58,
-	0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A,
-/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7,
-	0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09,
-/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0,
-	0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54,
-/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78,
-	0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
-/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B,
-	0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33,
-/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83,
-	0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83,
-/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E,
-	0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3,
-/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00,
-	0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02,
-/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58,
-	0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12,
-/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54,
-	0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E,
-/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE,
-/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05,
-	0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33,
-/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C,
-	0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02,
-/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12,
-	0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12,
-/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2,
-	0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3,
-/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41,
-	0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5,
-/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07,
-	0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C,
-/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B,
-	0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60,
-/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41,
-	0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B,
-/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00,
-	0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02,
-/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41,
-	0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40,
-/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1,
-	0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F,
-/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70,
-	0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2,
-	0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E,
-/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5,
-	0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5,
-/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0,
-	0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05,
-/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70,
-	0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA,
-/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F,
-	0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0,
-/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5,
-	0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01,
-/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D,
-	0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32,
-/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04,
-	0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82,
-/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01,
-	0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15,
-/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05,
-	0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43,
-/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E,
-	0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83,
-	0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0,
-/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34,
-	0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12,
-/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0,
-	0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0,
-/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80,
-/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0,
-	0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83,
-/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12,
-	0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33,
-/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E,
-	0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15,
-/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75,
-	0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12,
-/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80,
-	0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12,
-/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20,
-	0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C,
-/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80,
-	0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF,
-/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25,
-	0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07,
-/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08,
-	0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
-/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-	0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E,
-/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-	0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94,
-/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04,
-	0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83,
-/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5,
-	0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07,
-/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29,
-/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12,
-	0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0,
-/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70,
-	0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90,
-/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0,
-	0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF,
-/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5,
-	0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07,
-/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22,
-	0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90,
-/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94,
-	0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98,
-/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C,
-	0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0,
-/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4,
-	0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8,
-/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC,
-	0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0,
-/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6,
-	0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB,
-/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4,
-	0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5,
-/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08,
-	0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5,
-/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29,
-	0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80,
-/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5,
-	0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35,
-/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83,
-	0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12,
-/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26,
-	0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75,
-/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17,
-	0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4,
-/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93,
-	0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5,
-/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10,
-	0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54,
-/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06,
-	0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00,
-/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00,
-	0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0,
-/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75,
-	0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0,
-/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14,
-	0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70,
-/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7,
-	0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74,
-/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44,
-	0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12,
-/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0,
-	0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12,
-/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE,
-	0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B,
-/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4,
-	0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF,
-/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F,
-	0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70,
-/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41,
-	0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5,
-/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A,
-	0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5,
-/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5,
-	0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5,
-/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0,
-	0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C,
-/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80,
-	0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04,
-/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F,
-	0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A,
-/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41,
-	0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01,
-/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54,
-	0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F,
-/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58,
-	0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59,
-/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85,
-	0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59,
-/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15,
-	0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A,
-/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5,
-	0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2,
-/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20,
-	0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12,
-/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94,
-	0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9,
-/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9,
-	0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00,
-/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83,
-	0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12,
-/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02,
-	0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83,
-/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75,
-	0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94,
-/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A,
-	0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74,
-/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE,
-	0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08,
-/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85,
-	0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0,
-/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01,
-	0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC,
-/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E,
-	0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00,
-/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-	0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56,
-/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE,
-	0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12,
-/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E,
-	0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44,
-/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4,
-	0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08,
-/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82,
-	0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3,
-/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E,
-	0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC,
-	0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD,
-/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02,
-	0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09,
-/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42,
-	0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3,
-/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C,
-	0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F,
-/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84,
-	0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82,
-/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0,
-	0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22,
-/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12,
-/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20,
-	0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26,
-/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41,
-	0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40,
-/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12,
-	0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56,
-/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42,
-	0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39,
-/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5,
-	0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F,
-/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB,
-	0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00,
-/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81
-};
-
-int qib_sd7220_ib_load(struct qib_devdata *dd)
-{
-	return qib_sd7220_prog_ld(dd, IB_7220_SERDES, qib_sd7220_ib_img,
-		sizeof(qib_sd7220_ib_img), 0);
-}
-
-int qib_sd7220_ib_vfy(struct qib_devdata *dd)
-{
-	return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, qib_sd7220_ib_img,
-		sizeof(qib_sd7220_ib_img), 0);
-}
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
index f7eb1ddff5f..af30232b683 100644
--- a/drivers/infiniband/hw/qib/qib_tx.c
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -340,9 +340,13 @@ rescan:
 		if (i < dd->piobcnt2k)
 			buf = (u32 __iomem *)(dd->pio2kbase +
 				i * dd->palign);
-		else
+		else if (i < dd->piobcnt2k + dd->piobcnt4k || !dd->piovl15base)
 			buf = (u32 __iomem *)(dd->pio4kbase +
 				(i - dd->piobcnt2k) * dd->align4k);
+		else
+			buf = (u32 __iomem *)(dd->piovl15base +
+				(i - (dd->piobcnt2k + dd->piobcnt4k)) *
+				dd->align4k);
 		if (pbufnum)
 			*pbufnum = i;
 		dd->upd_pio_shadow = 0;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index df3eb8c9fd9..b4b22576f12 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1163,7 +1163,7 @@ static ssize_t create_child(struct device *dev,
 
 	return ret ? ret : count;
 }
-static DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child);
+static DEVICE_ATTR(create_child, S_IWUSR, NULL, create_child);
 
 static ssize_t delete_child(struct device *dev,
 			    struct device_attribute *attr,
@@ -1183,7 +1183,7 @@ static ssize_t delete_child(struct device *dev,
 	return ret ? ret : count;
 
 }
-static DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child);
+static DEVICE_ATTR(delete_child, S_IWUSR, NULL, delete_child);
 
 int ipoib_add_pkey_attr(struct net_device *dev)
 {
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 2ee6c7a68bd..054edf346e0 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -10,7 +10,8 @@
 
 #define EVDEV_MINOR_BASE	64
 #define EVDEV_MINORS		32
-#define EVDEV_BUFFER_SIZE	64
+#define EVDEV_MIN_BUFFER_SIZE	64U
+#define EVDEV_BUF_PACKETS	8
 
 #include <linux/poll.h>
 #include <linux/sched.h>
@@ -23,7 +24,6 @@
 #include "input-compat.h"
 
 struct evdev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -33,16 +33,18 @@ struct evdev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 };
 
 struct evdev_client {
-	struct input_event buffer[EVDEV_BUFFER_SIZE];
 	int head;
 	int tail;
 	spinlock_t buffer_lock; /* protects access to buffer, head and tail */
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
+	int bufsize;
+	struct input_event buffer[];
 };
 
 static struct evdev *evdev_table[EVDEV_MINORS];
@@ -52,11 +54,15 @@ static void evdev_pass_event(struct evdev_client *client,
 			     struct input_event *event)
 {
 	/*
-	 * Interrupts are disabled, just acquire the lock
+	 * Interrupts are disabled, just acquire the lock.
+	 * Make sure we don't leave with the client buffer
+	 * "empty" by having client->head == client->tail.
 	 */
 	spin_lock(&client->buffer_lock);
-	client->buffer[client->head++] = *event;
-	client->head &= EVDEV_BUFFER_SIZE - 1;
+	do {
+		client->buffer[client->head++] = *event;
+		client->head &= client->bufsize - 1;
+	} while (client->head == client->tail);
 	spin_unlock(&client->buffer_lock);
 
 	if (event->type == EV_SYN)
@@ -242,11 +248,21 @@ static int evdev_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static unsigned int evdev_compute_buffer_size(struct input_dev *dev)
+{
+	unsigned int n_events =
+		max(dev->hint_events_per_packet * EVDEV_BUF_PACKETS,
+		    EVDEV_MIN_BUFFER_SIZE);
+
+	return roundup_pow_of_two(n_events);
+}
+
 static int evdev_open(struct inode *inode, struct file *file)
 {
 	struct evdev *evdev;
 	struct evdev_client *client;
 	int i = iminor(inode) - EVDEV_MINOR_BASE;
+	unsigned int bufsize;
 	int error;
 
 	if (i >= EVDEV_MINORS)
@@ -263,12 +279,17 @@ static int evdev_open(struct inode *inode, struct file *file)
 	if (!evdev)
 		return -ENODEV;
 
-	client = kzalloc(sizeof(struct evdev_client), GFP_KERNEL);
+	bufsize = evdev_compute_buffer_size(evdev->handle.dev);
+
+	client = kzalloc(sizeof(struct evdev_client) +
+				bufsize * sizeof(struct input_event),
+			 GFP_KERNEL);
 	if (!client) {
 		error = -ENOMEM;
 		goto err_put_evdev;
 	}
 
+	client->bufsize = bufsize;
 	spin_lock_init(&client->buffer_lock);
 	client->evdev = evdev;
 	evdev_attach_client(evdev, client);
@@ -334,7 +355,7 @@ static int evdev_fetch_next_event(struct evdev_client *client,
 	have_event = client->head != client->tail;
 	if (have_event) {
 		*event = client->buffer[client->tail++];
-		client->tail &= EVDEV_BUFFER_SIZE - 1;
+		client->tail &= client->bufsize - 1;
 	}
 
 	spin_unlock_irq(&client->buffer_lock);
@@ -382,10 +403,15 @@ static unsigned int evdev_poll(struct file *file, poll_table *wait)
 {
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
+	unsigned int mask;
 
 	poll_wait(file, &evdev->wait, wait);
-	return ((client->head == client->tail) ? 0 : (POLLIN | POLLRDNORM)) |
-		(evdev->exist ? 0 : (POLLHUP | POLLERR));
+
+	mask = evdev->exist ? POLLOUT | POLLWRNORM : POLLHUP | POLLERR;
+	if (client->head != client->tail)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
 }
 
 #ifdef CONFIG_COMPAT
@@ -665,6 +691,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 								  sizeof(struct input_absinfo))))
 					return -EFAULT;
 
+				/* We can't change number of reserved MT slots */
+				if (t == ABS_MT_SLOT)
+					return -EINVAL;
+
 				/*
 				 * Take event lock to ensure that we are not
 				 * changing device parameters in the middle
@@ -768,7 +798,7 @@ static void evdev_remove_chrdev(struct evdev *evdev)
 static void evdev_mark_dead(struct evdev *evdev)
 {
 	mutex_lock(&evdev->mutex);
-	evdev->exist = 0;
+	evdev->exist = false;
 	mutex_unlock(&evdev->mutex);
 }
 
@@ -817,7 +847,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	init_waitqueue_head(&evdev->wait);
 
 	dev_set_name(&evdev->dev, "event%d", minor);
-	evdev->exist = 1;
+	evdev->exist = true;
 	evdev->minor = minor;
 
 	evdev->handle.dev = input_get_device(dev);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 9c79bd56b51..e1243b4b32a 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -33,25 +33,6 @@ MODULE_LICENSE("GPL");
 
 #define INPUT_DEVICES	256
 
-/*
- * EV_ABS events which should not be cached are listed here.
- */
-static unsigned int input_abs_bypass_init_data[] __initdata = {
-	ABS_MT_TOUCH_MAJOR,
-	ABS_MT_TOUCH_MINOR,
-	ABS_MT_WIDTH_MAJOR,
-	ABS_MT_WIDTH_MINOR,
-	ABS_MT_ORIENTATION,
-	ABS_MT_POSITION_X,
-	ABS_MT_POSITION_Y,
-	ABS_MT_TOOL_TYPE,
-	ABS_MT_BLOB_ID,
-	ABS_MT_TRACKING_ID,
-	ABS_MT_PRESSURE,
-	0
-};
-static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
-
 static LIST_HEAD(input_dev_list);
 static LIST_HEAD(input_handler_list);
 
@@ -181,6 +162,56 @@ static void input_stop_autorepeat(struct input_dev *dev)
 #define INPUT_PASS_TO_DEVICE	2
 #define INPUT_PASS_TO_ALL	(INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
 
+static int input_handle_abs_event(struct input_dev *dev,
+				  unsigned int code, int *pval)
+{
+	bool is_mt_event;
+	int *pold;
+
+	if (code == ABS_MT_SLOT) {
+		/*
+		 * "Stage" the event; we'll flush it later, when we
+		 * get actiual touch data.
+		 */
+		if (*pval >= 0 && *pval < dev->mtsize)
+			dev->slot = *pval;
+
+		return INPUT_IGNORE_EVENT;
+	}
+
+	is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST;
+
+	if (!is_mt_event) {
+		pold = &dev->abs[code];
+	} else if (dev->mt) {
+		struct input_mt_slot *mtslot = &dev->mt[dev->slot];
+		pold = &mtslot->abs[code - ABS_MT_FIRST];
+	} else {
+		/*
+		 * Bypass filtering for multitouch events when
+		 * not employing slots.
+		 */
+		pold = NULL;
+	}
+
+	if (pold) {
+		*pval = input_defuzz_abs_event(*pval, *pold,
+						dev->absfuzz[code]);
+		if (*pold == *pval)
+			return INPUT_IGNORE_EVENT;
+
+		*pold = *pval;
+	}
+
+	/* Flush pending "slot" event */
+	if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
+		dev->abs[ABS_MT_SLOT] = dev->slot;
+		input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
+	}
+
+	return INPUT_PASS_TO_HANDLERS;
+}
+
 static void input_handle_event(struct input_dev *dev,
 			       unsigned int type, unsigned int code, int value)
 {
@@ -196,12 +227,12 @@ static void input_handle_event(struct input_dev *dev,
 
 		case SYN_REPORT:
 			if (!dev->sync) {
-				dev->sync = 1;
+				dev->sync = true;
 				disposition = INPUT_PASS_TO_HANDLERS;
 			}
 			break;
 		case SYN_MT_REPORT:
-			dev->sync = 0;
+			dev->sync = false;
 			disposition = INPUT_PASS_TO_HANDLERS;
 			break;
 		}
@@ -233,21 +264,9 @@ static void input_handle_event(struct input_dev *dev,
 		break;
 
 	case EV_ABS:
-		if (is_event_supported(code, dev->absbit, ABS_MAX)) {
-
-			if (test_bit(code, input_abs_bypass)) {
-				disposition = INPUT_PASS_TO_HANDLERS;
-				break;
-			}
+		if (is_event_supported(code, dev->absbit, ABS_MAX))
+			disposition = input_handle_abs_event(dev, code, &value);
 
-			value = input_defuzz_abs_event(value,
-					dev->abs[code], dev->absfuzz[code]);
-
-			if (dev->abs[code] != value) {
-				dev->abs[code] = value;
-				disposition = INPUT_PASS_TO_HANDLERS;
-			}
-		}
 		break;
 
 	case EV_REL:
@@ -298,7 +317,7 @@ static void input_handle_event(struct input_dev *dev,
 	}
 
 	if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN)
-		dev->sync = 0;
+		dev->sync = false;
 
 	if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)
 		dev->event(dev, type, code, value);
@@ -528,12 +547,30 @@ void input_close_device(struct input_handle *handle)
 EXPORT_SYMBOL(input_close_device);
 
 /*
+ * Simulate keyup events for all keys that are marked as pressed.
+ * The function must be called with dev->event_lock held.
+ */
+static void input_dev_release_keys(struct input_dev *dev)
+{
+	int code;
+
+	if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
+		for (code = 0; code <= KEY_MAX; code++) {
+			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
+			    __test_and_clear_bit(code, dev->key)) {
+				input_pass_event(dev, EV_KEY, code, 0);
+			}
+		}
+		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+	}
+}
+
+/*
  * Prepare device for unregistering
  */
 static void input_disconnect_device(struct input_dev *dev)
 {
 	struct input_handle *handle;
-	int code;
 
 	/*
 	 * Mark device as going away. Note that we take dev->mutex here
@@ -552,15 +589,7 @@ static void input_disconnect_device(struct input_dev *dev)
 	 * generate events even after we done here but they will not
 	 * reach any handlers.
 	 */
-	if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
-		for (code = 0; code <= KEY_MAX; code++) {
-			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
-			    __test_and_clear_bit(code, dev->key)) {
-				input_pass_event(dev, EV_KEY, code, 0);
-			}
-		}
-		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
-	}
+	input_dev_release_keys(dev);
 
 	list_for_each_entry(handle, &dev->h_list, d_node)
 		handle->open = 0;
@@ -684,7 +713,7 @@ int input_set_keycode(struct input_dev *dev,
 		      unsigned int scancode, unsigned int keycode)
 {
 	unsigned long flags;
-	int old_keycode;
+	unsigned int old_keycode;
 	int retval;
 
 	if (keycode > KEY_MAX)
@@ -1278,6 +1307,7 @@ static void input_dev_release(struct device *device)
 	struct input_dev *dev = to_input_dev(device);
 
 	input_ff_destroy(dev);
+	input_mt_destroy_slots(dev);
 	kfree(dev);
 
 	module_put(THIS_MODULE);
@@ -1433,6 +1463,15 @@ static int input_dev_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 	input_dev_reset(input_dev, true);
+
+	/*
+	 * Keys that have been pressed at suspend time are unlikely
+	 * to be still pressed when we resume.
+	 */
+	spin_lock_irq(&input_dev->event_lock);
+	input_dev_release_keys(input_dev);
+	spin_unlock_irq(&input_dev->event_lock);
+
 	mutex_unlock(&input_dev->mutex);
 
 	return 0;
@@ -1518,6 +1557,45 @@ void input_free_device(struct input_dev *dev)
 EXPORT_SYMBOL(input_free_device);
 
 /**
+ * input_mt_create_slots() - create MT input slots
+ * @dev: input device supporting MT events and finger tracking
+ * @num_slots: number of slots used by the device
+ *
+ * This function allocates all necessary memory for MT slot handling
+ * in the input device, and adds ABS_MT_SLOT to the device capabilities.
+ */
+int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
+{
+	if (!num_slots)
+		return 0;
+
+	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
+	if (!dev->mt)
+		return -ENOMEM;
+
+	dev->mtsize = num_slots;
+	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(input_mt_create_slots);
+
+/**
+ * input_mt_destroy_slots() - frees the MT slots of the input device
+ * @dev: input device with allocated MT slots
+ *
+ * This function is only needed in error path as the input core will
+ * automatically free the MT slots when the device is destroyed.
+ */
+void input_mt_destroy_slots(struct input_dev *dev)
+{
+	kfree(dev->mt);
+	dev->mt = NULL;
+	dev->mtsize = 0;
+}
+EXPORT_SYMBOL(input_mt_destroy_slots);
+
+/**
  * input_set_capability - mark device as capable of a certain event
  * @dev: device that is capable of emitting or accepting event
  * @type: type of the event (EV_KEY, EV_REL, etc...)
@@ -1926,20 +2004,10 @@ static const struct file_operations input_fops = {
 	.open = input_open_file,
 };
 
-static void __init input_init_abs_bypass(void)
-{
-	const unsigned int *p;
-
-	for (p = input_abs_bypass_init_data; *p; p++)
-		input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
-}
-
 static int __init input_init(void)
 {
 	int err;
 
-	input_init_abs_bypass();
-
 	err = class_register(&input_class);
 	if (err) {
 		printk(KERN_ERR "input: unable to register input_dev class\n");
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 34157bb97ed..63834585c28 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -37,7 +37,6 @@ MODULE_LICENSE("GPL");
 #define JOYDEV_BUFFER_SIZE	64
 
 struct joydev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -46,6 +45,7 @@ struct joydev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 
 	struct js_corr corr[ABS_CNT];
 	struct JS_DATA_SAVE_TYPE glue;
@@ -760,7 +760,7 @@ static void joydev_remove_chrdev(struct joydev *joydev)
 static void joydev_mark_dead(struct joydev *joydev)
 {
 	mutex_lock(&joydev->mutex);
-	joydev->exist = 0;
+	joydev->exist = false;
 	mutex_unlock(&joydev->mutex);
 }
 
@@ -817,10 +817,9 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 	init_waitqueue_head(&joydev->wait);
 
 	dev_set_name(&joydev->dev, "js%d", minor);
-	joydev->exist = 1;
+	joydev->exist = true;
 	joydev->minor = minor;
 
-	joydev->exist = 1;
 	joydev->handle.dev = input_get_device(dev);
 	joydev->handle.name = dev_name(&joydev->dev);
 	joydev->handle.handler = handler;
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index fbd62abb66f..0ffaf2c77a1 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -89,7 +89,6 @@ struct gc_pad {
 struct gc {
 	struct pardevice *pd;
 	struct gc_pad pads[GC_MAX_DEVICES];
-	struct input_dev *dev[GC_MAX_DEVICES];
 	struct timer_list timer;
 	int pad_count[GC_MAX];
 	int used;
@@ -387,7 +386,7 @@ static void gc_nes_process_packet(struct gc *gc)
 	for (i = 0; i < GC_MAX_DEVICES; i++) {
 
 		pad = &gc->pads[i];
-		dev = gc->dev[i];
+		dev = pad->dev;
 		s = gc_status_bit[i];
 
 		switch (pad->type) {
@@ -579,7 +578,7 @@ static void gc_psx_command(struct gc *gc, int b, unsigned char *data)
 		read = parport_read_status(port) ^ 0x80;
 
 		for (j = 0; j < GC_MAX_DEVICES; j++) {
-			struct gc_pad *pad = &gc->pads[i];
+			struct gc_pad *pad = &gc->pads[j];
 
 			if (pad->type == GC_PSX || pad->type == GC_DDR)
 				data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index c1087ce4cef..269a846f369 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -9,6 +9,7 @@
  *               2005 Dominic Cerquetti <binary1230@yahoo.com>
  *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
  *               2007 Jan Kratochvil <honza@jikos.cz>
+ *               2010 Christoph Fritz <chf.fritz@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -88,6 +89,9 @@
    but we map them to axes when possible to simplify things */
 #define MAP_DPAD_TO_BUTTONS		(1 << 0)
 #define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
+#define MAP_STICKS_TO_NULL		(1 << 2)
+#define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
+				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
@@ -102,6 +106,10 @@ static int triggers_to_buttons;
 module_param(triggers_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
 
+static int sticks_to_null;
+module_param(sticks_to_null, bool, S_IRUGO);
+MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
+
 static const struct xpad_device {
 	u16 idVendor;
 	u16 idProduct;
@@ -114,7 +122,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -151,6 +159,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -158,7 +167,7 @@ static const struct xpad_device {
 /* buttons shared with xbox and xbox360 */
 static const signed short xpad_common_btn[] = {
 	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
-	BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
+	BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
 	-1						/* terminating entry */
 };
 
@@ -168,10 +177,10 @@ static const signed short xpad_btn[] = {
 	-1			/* terminating entry */
 };
 
-/* used when dpad is mapped to nuttons */
+/* used when dpad is mapped to buttons */
 static const signed short xpad_btn_pad[] = {
-	BTN_LEFT, BTN_RIGHT,		/* d-pad left, right */
-	BTN_0, BTN_1,			/* d-pad up, down (XXX names??) */
+	BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2,		/* d-pad left, right */
+	BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4,		/* d-pad up, down */
 	-1				/* terminating entry */
 };
 
@@ -279,17 +288,19 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 {
 	struct input_dev *dev = xpad->dev;
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 12)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 16)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		/* left stick */
+		input_report_abs(dev, ABS_X,
+				 (__s16) le16_to_cpup((__le16 *)(data + 12)));
+		input_report_abs(dev, ABS_Y,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
+
+		/* right stick */
+		input_report_abs(dev, ABS_RX,
+				 (__s16) le16_to_cpup((__le16 *)(data + 16)));
+		input_report_abs(dev, ABS_RY,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
+	}
 
 	/* triggers left/right */
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -302,10 +313,11 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
-		input_report_key(dev, BTN_LEFT,  data[2] & 0x04);
-		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
-		input_report_key(dev, BTN_0,     data[2] & 0x01); /* up */
-		input_report_key(dev, BTN_1,     data[2] & 0x02); /* down */
+		/* dpad as buttons (left, right, up, down) */
+		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
+		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
+		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
+		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
 	} else {
 		input_report_abs(dev, ABS_HAT0X,
 				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
@@ -315,7 +327,7 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 
 	/* start/back buttons and stick press left/right */
 	input_report_key(dev, BTN_START,  data[2] & 0x10);
-	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+	input_report_key(dev, BTN_SELECT, data[2] & 0x20);
 	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
 	input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
 
@@ -349,11 +361,11 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
-		/* dpad as buttons (right, left, down, up) */
-		input_report_key(dev, BTN_LEFT, data[2] & 0x04);
-		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
-		input_report_key(dev, BTN_0, data[2] & 0x01);	/* up */
-		input_report_key(dev, BTN_1, data[2] & 0x02);	/* down */
+		/* dpad as buttons (left, right, up, down) */
+		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
+		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
+		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
+		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
 	} else {
 		input_report_abs(dev, ABS_HAT0X,
 				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
@@ -363,7 +375,7 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 
 	/* start/back buttons */
 	input_report_key(dev, BTN_START,  data[2] & 0x10);
-	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+	input_report_key(dev, BTN_SELECT, data[2] & 0x20);
 
 	/* stick press left/right */
 	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
@@ -378,17 +390,19 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_report_key(dev, BTN_TR,	data[3] & 0x02);
 	input_report_key(dev, BTN_MODE,	data[3] & 0x04);
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 6)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 10)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		/* left stick */
+		input_report_abs(dev, ABS_X,
+				 (__s16) le16_to_cpup((__le16 *)(data + 6)));
+		input_report_abs(dev, ABS_Y,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
+
+		/* right stick */
+		input_report_abs(dev, ABS_RX,
+				 (__s16) le16_to_cpup((__le16 *)(data + 10)));
+		input_report_abs(dev, ABS_RY,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+	}
 
 	/* triggers left/right */
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -814,6 +828,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
 		if (triggers_to_buttons)
 			xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
+		if (sticks_to_null)
+			xpad->mapping |= MAP_STICKS_TO_NULL;
 	}
 
 	xpad->dev = input_dev;
@@ -830,16 +846,20 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	input_dev->open = xpad_open;
 	input_dev->close = xpad_close;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		input_dev->evbit[0] |= BIT_MASK(EV_ABS);
+		/* set up axes */
+		for (i = 0; xpad_abs[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs[i]);
+	}
 
-	/* set up standard buttons and axes */
+	/* set up standard buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
 		__set_bit(xpad_common_btn[i], input_dev->keybit);
 
-	for (i = 0; xpad_abs[i] >= 0; i++)
-		xpad_set_up_abs(input_dev, xpad_abs[i]);
-
-	/* Now set up model-specific ones */
+	/* set up model-specific ones */
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
 			__set_bit(xpad360_btn[i], input_dev->keybit);
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index d8fa5d724c5..b171f63fe4d 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -73,7 +73,7 @@ config KEYBOARD_ATKBD
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86 && !X86_MRST
+	select SERIO_I8042 if X86
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
@@ -124,7 +124,7 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
-config QT2160
+config KEYBOARD_QT2160
 	tristate "Atmel AT42QT2160 Touch Sensor Chip"
 	depends on I2C && EXPERIMENTAL
 	help
@@ -297,6 +297,18 @@ config KEYBOARD_MAX7359
 	  To compile this driver as a module, choose M here: the
 	  module will be called max7359_keypad.
 
+config KEYBOARD_MCS
+	tristate "MELFAS MCS Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs_touchkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
@@ -342,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
+config KEYBOARD_SAMSUNG
+	tristate "Samsung keypad support"
+	depends on SAMSUNG_DEV_KEYPAD
+	help
+	  Say Y here if you want to use the Samsung keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called samsung-keypad.
+
 config KEYBOARD_STOWAWAY
 	tristate "Stowaway keyboard"
 	select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 4596d0c6f92..1a66d5f1ca8 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -26,12 +26,14 @@ obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
+obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
+obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 4771ab172b5..d6918cb966c 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 
 #include <linux/i2c/adp5588.h>
@@ -54,6 +55,10 @@
 
 #define KEYP_MAX_EVENT		10
 
+#define MAXGPIO			18
+#define ADP_BANK(offs)		((offs) >> 3)
+#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
+
 /*
  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  * since the Event Counter Register updated 25ms after the interrupt
@@ -67,6 +72,16 @@ struct adp5588_kpad {
 	struct delayed_work work;
 	unsigned long delay;
 	unsigned short keycode[ADP5588_KEYMAPSIZE];
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
 };
 
 static int adp5588_read(struct i2c_client *client, u8 reg)
@@ -84,12 +99,222 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
 	return i2c_smbus_write_byte_data(client, reg, val);
 }
 
+#ifdef CONFIG_GPIOLIB
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+			   kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+				 kpad->dat_out[bank]);
+	ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
+				 kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
+				const struct adp5588_kpad_platform_data *pdata)
+{
+	bool pin_used[MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, 0, sizeof(pin_used));
+
+	for (i = 0; i < pdata->rows; i++)
+		pin_used[i] = true;
+
+	for (i = 0; i < pdata->cols; i++)
+		pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < MAXGPIO; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5588_gpio_direction_input;
+	kpad->gc.direction_output = adp5588_gpio_direction_output;
+	kpad->gc.get = adp5588_gpio_get_value;
+	kpad->gc.set = adp5588_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add(&kpad->gc);
+	if (error) {
+		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		kpad->dat_out[i] = adp5588_read(kpad->client,
+						GPIO_DAT_OUT1 + i);
+		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	error = gpiochip_remove(&kpad->gc);
+	if (error)
+		dev_warn(dev, "gpiochip_remove failed %d\n", error);
+}
+#else
+static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+}
+#endif
+
+static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
+{
+	int i, j;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5588_read(kpad->client, Key_EVENTA + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
+			for (j = 0; j < kpad->gpimapsize; j++) {
+				if (key_val == kpad->gpimap[j].pin) {
+					input_report_switch(kpad->input,
+							kpad->gpimap[j].sw_evt,
+							key & KEY_EV_PRESSED);
+					break;
+				}
+			}
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
 static void adp5588_work(struct work_struct *work)
 {
 	struct adp5588_kpad *kpad = container_of(work,
 						struct adp5588_kpad, work.work);
 	struct i2c_client *client = kpad->client;
-	int i, key, status, ev_cnt;
+	int status, ev_cnt;
 
 	status = adp5588_read(client, INT_STAT);
 
@@ -99,12 +324,7 @@ static void adp5588_work(struct work_struct *work)
 	if (status & KE_INT) {
 		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
 		if (ev_cnt) {
-			for (i = 0; i < ev_cnt; i++) {
-				key = adp5588_read(client, Key_EVENTA + i);
-				input_report_key(kpad->input,
-					kpad->keycode[(key & KEY_EV_MASK) - 1],
-					key & KEY_EV_PRESSED);
-			}
+			adp5588_report_events(kpad, ev_cnt);
 			input_sync(kpad->input);
 		}
 	}
@@ -128,8 +348,10 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
 
 static int __devinit adp5588_setup(struct i2c_client *client)
 {
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, ret;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
 
 	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
 	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
@@ -144,6 +366,32 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	for (i = 0; i < KEYP_MAX_EVENT; i++)
 		ret |= adp5588_read(client, Key_EVENTA);
 
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
+		} else {
+			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
+			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
+		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
+		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
+	}
+
+	if (gpio_data) {
+		for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+			int pull_mask = gpio_data->pullup_dis_mask;
+
+			ret |= adp5588_write(client, GPIO_PULL1 + i,
+				(pull_mask >> (8 * i)) & 0xFF);
+		}
+	}
+
 	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
 					OVR_FLOW_INT | K_LCK_INT |
 					GPI_INT | KE_INT); /* Status is W1C */
@@ -158,11 +406,49 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	return 0;
 }
 
+static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
+{
+	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
+	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
+	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
+	int gpi_stat_tmp, pin_loc;
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - GPI_PIN_ROW_BASE;
+		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - GPI_PIN_COL_BASE;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - GPI_PIN_COL_BASE - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
+				pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+
 static int __devinit adp5588_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct adp5588_kpad *kpad;
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *input;
 	unsigned int revid;
 	int ret, i;
@@ -189,6 +475,37 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if (pin <= GPI_PIN_ROW_END) {
+			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
+				dev_err(&client->dev, "invalid gpi row data\n");
+				return -EINVAL;
+			}
+		} else {
+			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
+				dev_err(&client->dev, "invalid gpi col data\n");
+				return -EINVAL;
+			}
+		}
+	}
+
 	if (!client->irq) {
 		dev_err(&client->dev, "no IRQ?\n");
 		return -EINVAL;
@@ -233,6 +550,9 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	memcpy(kpad->keycode, pdata->keymap,
 		pdata->keymapsize * input->keycodesize);
 
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
 	/* setup input device */
 	__set_bit(EV_KEY, input->evbit);
 
@@ -243,6 +563,11 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
 	__clear_bit(KEY_RESERVED, input->keybit);
 
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&client->dev, "unable to register input device\n");
@@ -261,6 +586,13 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	if (error)
 		goto err_free_irq;
 
+	if (kpad->gpimapsize)
+		adp5588_report_switch_state(kpad);
+
+	error = adp5588_gpio_add(kpad);
+	if (error)
+		goto err_free_irq;
+
 	device_init_wakeup(&client->dev, 1);
 	i2c_set_clientdata(client, kpad);
 
@@ -287,7 +619,7 @@ static int __devexit adp5588_remove(struct i2c_client *client)
 	free_irq(client->irq, kpad);
 	cancel_delayed_work_sync(&kpad->work);
 	input_unregister_device(kpad->input);
-	i2c_set_clientdata(client, NULL);
+	adp5588_gpio_remove(kpad);
 	kfree(kpad);
 
 	return 0;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index b8213fd13c3..a9fd147f2ba 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -31,6 +31,7 @@ struct gpio_button_data {
 	struct input_dev *input;
 	struct timer_list timer;
 	struct work_struct work;
+	int timer_debounce;	/* in msecs */
 	bool disabled;
 };
 
@@ -109,7 +110,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 		 * Disable IRQ and possible debouncing timer.
 		 */
 		disable_irq(gpio_to_irq(bdata->button->gpio));
-		if (bdata->button->debounce_interval)
+		if (bdata->timer_debounce)
 			del_timer_sync(&bdata->timer);
 
 		bdata->disabled = true;
@@ -347,9 +348,9 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	if (button->debounce_interval)
+	if (bdata->timer_debounce)
 		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(button->debounce_interval));
+			jiffies + msecs_to_jiffies(bdata->timer_debounce));
 	else
 		schedule_work(&bdata->work);
 
@@ -383,6 +384,14 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 		goto fail3;
 	}
 
+	if (button->debounce_interval) {
+		error = gpio_set_debounce(button->gpio,
+					  button->debounce_interval * 1000);
+		/* use timer if gpiolib doesn't provide debounce */
+		if (error < 0)
+			bdata->timer_debounce = button->debounce_interval;
+	}
+
 	irq = gpio_to_irq(button->gpio);
 	if (irq < 0) {
 		error = irq;
@@ -498,7 +507,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
@@ -526,7 +535,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index bc696931fed..f7c2a166576 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -642,6 +642,7 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 	struct lm8323_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *idev;
 	struct lm8323_chip *lm;
+	int pwm;
 	int i, err;
 	unsigned long tmo;
 	u8 data[2];
@@ -710,8 +711,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail1;
 	}
 
-	for (i = 0; i < LM8323_NUM_PWMS; i++) {
-		err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]);
+	for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) {
+		err = init_pwm(lm, pwm + 1, &client->dev,
+			       pdata->pwm_names[pwm]);
 		if (err < 0)
 			goto fail2;
 	}
@@ -764,9 +766,9 @@ fail4:
 fail3:
 	device_remove_file(&client->dev, &dev_attr_disable_kp);
 fail2:
-	while (--i >= 0)
-		if (lm->pwm[i].enabled)
-			led_classdev_unregister(&lm->pwm[i].cdev);
+	while (--pwm >= 0)
+		if (lm->pwm[pwm].enabled)
+			led_classdev_unregister(&lm->pwm[pwm].cdev);
 fail1:
 	input_free_device(idev);
 	kfree(lm);
@@ -778,8 +780,6 @@ static int __devexit lm8323_remove(struct i2c_client *client)
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 	int i;
 
-	i2c_set_clientdata(client, NULL);
-
 	disable_irq_wake(client->irq);
 	free_irq(client->irq, lm);
 	cancel_work_sync(&lm->work);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b443e088fd3..b02e4268e18 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -37,6 +37,7 @@ struct matrix_keypad {
 	spinlock_t lock;
 	bool scan_pending;
 	bool stopped;
+	bool gpio_all_disabled;
 };
 
 /*
@@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		enable_irq(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 static void disable_row_irqs(struct matrix_keypad *keypad)
@@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		disable_irq_nosync(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 /*
@@ -216,45 +225,69 @@ static void matrix_keypad_stop(struct input_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct device *dev)
+static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	matrix_keypad_stop(keypad->input_dev);
+	if (pdata->clustered_irq > 0) {
+		if (enable_irq_wake(pdata->clustered_irq) == 0)
+			keypad->gpio_all_disabled = true;
+	} else {
 
-	if (device_may_wakeup(&pdev->dev)) {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (!test_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
+				gpio = pdata->row_gpios[i];
 
 				if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
 					__set_bit(i, keypad->disabled_gpios);
 			}
 		}
 	}
-
-	return 0;
 }
 
-static int matrix_keypad_resume(struct device *dev)
+static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	if (device_may_wakeup(&pdev->dev)) {
+	if (pdata->clustered_irq > 0) {
+		if (keypad->gpio_all_disabled) {
+			disable_irq_wake(pdata->clustered_irq);
+			keypad->gpio_all_disabled = false;
+		}
+	} else {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (test_and_clear_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
-
+				gpio = pdata->row_gpios[i];
 				disable_irq_wake(gpio_to_irq(gpio));
 			}
 		}
 	}
+}
+
+static int matrix_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_enable_wakeup(keypad);
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_disable_wakeup(keypad);
 
 	matrix_keypad_start(keypad->input_dev);
 
@@ -296,17 +329,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
 		gpio_direction_input(pdata->row_gpios[i]);
 	}
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+	if (pdata->clustered_irq > 0) {
+		err = request_irq(pdata->clustered_irq,
 				matrix_keypad_interrupt,
-				IRQF_DISABLED |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				pdata->clustered_irq_flags,
 				"matrix-keypad", keypad);
 		if (err) {
 			dev_err(&pdev->dev,
-				"Unable to acquire interrupt for GPIO line %i\n",
-				pdata->row_gpios[i]);
-			goto err_free_irqs;
+				"Unable to acquire clustered interrupt\n");
+			goto err_free_rows;
+		}
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+					matrix_keypad_interrupt,
+					IRQF_DISABLED |
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					"matrix-keypad", keypad);
+			if (err) {
+				dev_err(&pdev->dev,
+					"Unable to acquire interrupt "
+					"for GPIO line %i\n",
+					pdata->row_gpios[i]);
+				goto err_free_irqs;
+			}
 		}
 	}
 
@@ -418,11 +465,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
-		gpio_free(pdata->row_gpios[i]);
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
 	}
 
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
 	for (i = 0; i < pdata->num_col_gpios; i++)
 		gpio_free(pdata->col_gpios[i]);
 
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 7fc8185e5c1..9091ff5ea80 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -265,7 +265,6 @@ static int __devexit max7359_remove(struct i2c_client *client)
 
 	free_irq(client->irq, keypad);
 	input_unregister_device(keypad->input_dev);
-	i2c_set_clientdata(client, NULL);
 	kfree(keypad);
 
 	return 0;
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
new file mode 100644
index 00000000000..63b849d7e90
--- /dev/null
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -0,0 +1,239 @@
+/*
+ * mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+/* MCS5000 Touchkey */
+#define MCS5000_TOUCHKEY_STATUS		0x04
+#define MCS5000_TOUCHKEY_STATUS_PRESS	7
+#define MCS5000_TOUCHKEY_FW		0x0a
+#define MCS5000_TOUCHKEY_BASE_VAL	0x61
+
+/* MCS5080 Touchkey */
+#define MCS5080_TOUCHKEY_STATUS		0x00
+#define MCS5080_TOUCHKEY_STATUS_PRESS	3
+#define MCS5080_TOUCHKEY_FW		0x01
+#define MCS5080_TOUCHKEY_BASE_VAL	0x1
+
+enum mcs_touchkey_type {
+	MCS5000_TOUCHKEY,
+	MCS5080_TOUCHKEY,
+};
+
+struct mcs_touchkey_chip {
+	unsigned int status_reg;
+	unsigned int pressbit;
+	unsigned int press_invert;
+	unsigned int baseval;
+};
+
+struct mcs_touchkey_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct mcs_touchkey_chip chip;
+	unsigned int key_code;
+	unsigned int key_val;
+	unsigned short keycodes[];
+};
+
+static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mcs_touchkey_data *data = dev_id;
+	struct mcs_touchkey_chip *chip = &data->chip;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input_dev;
+	unsigned int key_val;
+	unsigned int pressed;
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, chip->status_reg);
+	if (val < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", val);
+		goto out;
+	}
+
+	pressed = (val & (1 << chip->pressbit)) >> chip->pressbit;
+	if (chip->press_invert)
+		pressed ^= chip->press_invert;
+
+	/* key_val is 0 when released, so we should use key_val of press. */
+	if (pressed) {
+		key_val = val & (0xff >> (8 - chip->pressbit));
+		if (!key_val)
+			goto out;
+		key_val -= chip->baseval;
+		data->key_code = data->keycodes[key_val];
+		data->key_val = key_val;
+	}
+
+	input_event(input, EV_MSC, MSC_SCAN, data->key_val);
+	input_report_key(input, data->key_code, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code,
+		pressed ? "pressed" : "released");
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit mcs_touchkey_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs_touchkey_data *data;
+	struct input_dev *input_dev;
+	unsigned int fw_reg;
+	int fw_ver;
+	int error;
+	int i;
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(struct mcs_touchkey_data) +
+			sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
+			GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	if (id->driver_data == MCS5000_TOUCHKEY) {
+		data->chip.status_reg = MCS5000_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS;
+		data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5000_TOUCHKEY_FW;
+	} else {
+		data->chip.status_reg = MCS5080_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS;
+		data->chip.press_invert = 1;
+		data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5080_TOUCHKEY_FW;
+	}
+
+	fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
+	if (fw_ver < 0) {
+		error = fw_ver;
+		dev_err(&client->dev, "i2c read error[%d]\n", error);
+		goto err_free_mem;
+	}
+	dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
+
+	input_dev->name = "MELPAS MCS Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	input_dev->keycode = data->keycodes;
+	input_dev->keycodesize = sizeof(data->keycodes[0]);
+	input_dev->keycodemax = pdata->key_maxval + 1;
+
+	for (i = 0; i < pdata->keymap_size; i++) {
+		unsigned int val = MCS_KEY_VAL(pdata->keymap[i]);
+		unsigned int code = MCS_KEY_CODE(pdata->keymap[i]);
+
+		data->keycodes[val] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, data);
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
+			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit mcs_touchkey_remove(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id mcs_touchkey_id[] = {
+	{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
+	{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
+
+static struct i2c_driver mcs_touchkey_driver = {
+	.driver = {
+		.name	= "mcs_touchkey",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mcs_touchkey_probe,
+	.remove		= __devexit_p(mcs_touchkey_remove),
+	.id_table	= mcs_touchkey_id,
+};
+
+static int __init mcs_touchkey_init(void)
+{
+	return i2c_add_driver(&mcs_touchkey_driver);
+}
+
+static void __exit mcs_touchkey_exit(void)
+{
+	i2c_del_driver(&mcs_touchkey_driver);
+}
+
+module_init(mcs_touchkey_init);
+module_exit(mcs_touchkey_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
+MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 31f30087b59..fac695157e8 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -358,7 +358,6 @@ static int __devexit qt2160_remove(struct i2c_client *client)
 	input_unregister_device(qt2160->input);
 	kfree(qt2160);
 
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
new file mode 100644
index 00000000000..f689f49e310
--- /dev/null
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -0,0 +1,491 @@
+/*
+ * Samsung keypad driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <plat/keypad.h>
+
+#define SAMSUNG_KEYIFCON			0x00
+#define SAMSUNG_KEYIFSTSCLR			0x04
+#define SAMSUNG_KEYIFCOL			0x08
+#define SAMSUNG_KEYIFROW			0x0c
+#define SAMSUNG_KEYIFFC				0x10
+
+/* SAMSUNG_KEYIFCON */
+#define SAMSUNG_KEYIFCON_INT_F_EN		(1 << 0)
+#define SAMSUNG_KEYIFCON_INT_R_EN		(1 << 1)
+#define SAMSUNG_KEYIFCON_DF_EN			(1 << 2)
+#define SAMSUNG_KEYIFCON_FC_EN			(1 << 3)
+#define SAMSUNG_KEYIFCON_WAKEUPEN		(1 << 4)
+
+/* SAMSUNG_KEYIFSTSCLR */
+#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK		(0xff << 0)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK		(0xff << 8)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET	8
+#define S5PV210_KEYIFSTSCLR_P_INT_MASK		(0x3fff << 0)
+#define S5PV210_KEYIFSTSCLR_R_INT_MASK		(0x3fff << 16)
+#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET	16
+
+/* SAMSUNG_KEYIFCOL */
+#define SAMSUNG_KEYIFCOL_MASK			(0xff << 0)
+#define S5PV210_KEYIFCOLEN_MASK			(0xff << 8)
+
+/* SAMSUNG_KEYIFROW */
+#define SAMSUNG_KEYIFROW_MASK			(0xff << 0)
+#define S5PV210_KEYIFROW_MASK			(0x3fff << 0)
+
+/* SAMSUNG_KEYIFFC */
+#define SAMSUNG_KEYIFFC_MASK			(0x3ff << 0)
+
+enum samsung_keypad_type {
+	KEYPAD_TYPE_SAMSUNG,
+	KEYPAD_TYPE_S5PV210,
+};
+
+struct samsung_keypad {
+	struct input_dev *input_dev;
+	struct clk *clk;
+	void __iomem *base;
+	wait_queue_head_t wait;
+	bool stopped;
+	int irq;
+	unsigned int row_shift;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned short keycodes[];
+};
+
+static int samsung_keypad_is_s5pv210(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	enum samsung_keypad_type type =
+		platform_get_device_id(pdev)->driver_data;
+
+	return type == KEYPAD_TYPE_S5PV210;
+}
+
+static void samsung_keypad_scan(struct samsung_keypad *keypad,
+				unsigned int *row_state)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int col;
+	unsigned int val;
+
+	for (col = 0; col < keypad->cols; col++) {
+		if (samsung_keypad_is_s5pv210(dev)) {
+			val = S5PV210_KEYIFCOLEN_MASK;
+			val &= ~(1 << col) << 8;
+		} else {
+			val = SAMSUNG_KEYIFCOL_MASK;
+			val &= ~(1 << col);
+		}
+
+		writel(val, keypad->base + SAMSUNG_KEYIFCOL);
+		mdelay(1);
+
+		val = readl(keypad->base + SAMSUNG_KEYIFROW);
+		row_state[col] = ~val & ((1 << keypad->rows) - 1);
+	}
+
+	/* KEYIFCOL reg clear */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static bool samsung_keypad_report(struct samsung_keypad *keypad,
+				  unsigned int *row_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int changed;
+	unsigned int pressed;
+	unsigned int key_down = 0;
+	unsigned int val;
+	unsigned int col, row;
+
+	for (col = 0; col < keypad->cols; col++) {
+		changed = row_state[col] ^ keypad->row_state[col];
+		key_down |= row_state[col];
+		if (!changed)
+			continue;
+
+		for (row = 0; row < keypad->rows; row++) {
+			if (!(changed & (1 << row)))
+				continue;
+
+			pressed = row_state[col] & (1 << row);
+
+			dev_dbg(&keypad->input_dev->dev,
+				"key %s, row: %d, col: %d\n",
+				pressed ? "pressed" : "released", row, col);
+
+			val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, val);
+			input_report_key(input_dev,
+					keypad->keycodes[val], pressed);
+		}
+		input_sync(keypad->input_dev);
+	}
+
+	memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
+
+	return key_down;
+}
+
+static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
+{
+	struct samsung_keypad *keypad = dev_id;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned int val;
+	bool key_down;
+
+	do {
+		val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
+		/* Clear interrupt. */
+		writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+		samsung_keypad_scan(keypad, row_state);
+
+		key_down = samsung_keypad_report(keypad, row_state);
+		if (key_down)
+			wait_event_timeout(keypad->wait, keypad->stopped,
+					   msecs_to_jiffies(50));
+
+	} while (key_down && !keypad->stopped);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_keypad_start(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Tell IRQ thread that it may poll the device. */
+	keypad->stopped = false;
+
+	clk_enable(keypad->clk);
+
+	/* Enable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	/* KEYIFCOL reg clear. */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static void samsung_keypad_stop(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	keypad->stopped = true;
+	wake_up(&keypad->wait);
+	disable_irq(keypad->irq);
+
+	/* Clear interrupt. */
+	writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+	/* Disable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN);
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+
+	/*
+	 * Now that chip should not generate interrupts we can safely
+	 * re-enable the handler.
+	 */
+	enable_irq(keypad->irq);
+}
+
+static int samsung_keypad_open(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_start(keypad);
+
+	return 0;
+}
+
+static void samsung_keypad_close(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_stop(keypad);
+}
+
+static int __devinit samsung_keypad_probe(struct platform_device *pdev)
+{
+	const struct samsung_keypad_platdata *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct samsung_keypad *keypad;
+	struct resource *res;
+	struct input_dev *input_dev;
+	unsigned int row_shift;
+	unsigned int keymap_size;
+	int error;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS)
+		return -EINVAL;
+
+	if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS)
+		return -EINVAL;
+
+	/* initialize the gpio */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdata->rows, pdata->cols);
+
+	row_shift = get_count_order(pdata->cols);
+	keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]);
+
+	keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		error = -ENODEV;
+		goto err_free_mem;
+	}
+
+	keypad->base = ioremap(res->start, resource_size(res));
+	if (!keypad->base) {
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, "keypad");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_unmap_base;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->row_shift = row_shift;
+	keypad->rows = pdata->rows;
+	keypad->cols = pdata->cols;
+	init_waitqueue_head(&keypad->wait);
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+	input_set_drvdata(input_dev, keypad);
+
+	input_dev->open = samsung_keypad_open;
+	input_dev->close = samsung_keypad_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = pdata->rows << row_shift;
+
+	matrix_keypad_build_keymap(keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
+
+	keypad->irq = platform_get_irq(pdev, 0);
+	if (keypad->irq < 0) {
+		error = keypad->irq;
+		goto err_put_clk;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq,
+			IRQF_ONESHOT, dev_name(&pdev->dev), keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register keypad interrupt\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(keypad->input_dev);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_put_clk:
+	clk_put(keypad->clk);
+err_unmap_base:
+	iounmap(keypad->base);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keypad);
+
+	return error;
+}
+
+static int __devexit samsung_keypad_remove(struct platform_device *pdev)
+{
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	platform_set_drvdata(pdev, NULL);
+
+	input_unregister_device(keypad->input_dev);
+
+	/*
+	 * It is safe to free IRQ after unregistering device because
+	 * samsung_keypad_close will shut off interrupts.
+	 */
+	free_irq(keypad->irq, keypad);
+
+	clk_put(keypad->clk);
+
+	iounmap(keypad->base);
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
+					 bool enable)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int val;
+
+	clk_enable(keypad->clk);
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	if (enable) {
+		val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			enable_irq_wake(keypad->irq);
+	} else {
+		val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			disable_irq_wake(keypad->irq);
+	}
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+}
+
+static int samsung_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		samsung_keypad_stop(keypad);
+
+	samsung_keypad_toggle_wakeup(keypad, true);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int samsung_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	samsung_keypad_toggle_wakeup(keypad, false);
+
+	if (input_dev->users)
+		samsung_keypad_start(keypad);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops samsung_keypad_pm_ops = {
+	.suspend	= samsung_keypad_suspend,
+	.resume		= samsung_keypad_resume,
+};
+#endif
+
+static struct platform_device_id samsung_keypad_driver_ids[] = {
+	{
+		.name		= "samsung-keypad",
+		.driver_data	= KEYPAD_TYPE_SAMSUNG,
+	}, {
+		.name		= "s5pv210-keypad",
+		.driver_data	= KEYPAD_TYPE_S5PV210,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids);
+
+static struct platform_driver samsung_keypad_driver = {
+	.probe		= samsung_keypad_probe,
+	.remove		= __devexit_p(samsung_keypad_remove),
+	.driver		= {
+		.name	= "samsung-keypad",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &samsung_keypad_pm_ops,
+#endif
+	},
+	.id_table	= samsung_keypad_driver_ids,
+};
+
+static int __init samsung_keypad_init(void)
+{
+	return platform_driver_register(&samsung_keypad_driver);
+}
+module_init(samsung_keypad_init);
+
+static void __exit samsung_keypad_exit(void)
+{
+	platform_driver_unregister(&samsung_keypad_driver);
+}
+module_exit(samsung_keypad_exit);
+
+MODULE_DESCRIPTION("Samsung keypad driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-keypad");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 493c93f25e2..00137bebcf9 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -316,8 +316,6 @@ static int __devexit tca6416_keypad_remove(struct i2c_client *client)
 	input_unregister_device(chip->input);
 	kfree(chip);
 
-	i2c_set_clientdata(client, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 7aa59e07b68..fb16b5e5ea1 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -51,8 +51,12 @@
  */
 #define TWL4030_MAX_ROWS	8	/* TWL4030 hard limit */
 #define TWL4030_MAX_COLS	8
-#define TWL4030_ROW_SHIFT	3
-#define TWL4030_KEYMAP_SIZE	(TWL4030_MAX_ROWS * TWL4030_MAX_COLS)
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT	4
+#define TWL4030_KEYMAP_SIZE	(TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
 
 struct twl4030_keypad {
 	unsigned short	keymap[TWL4030_KEYMAP_SIZE];
@@ -182,7 +186,7 @@ static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state)
 	return ret;
 }
 
-static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
 {
 	int i;
 	u16 check = 0;
@@ -191,12 +195,12 @@ static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
 		u16 col = key_state[i];
 
 		if ((col & check) && hweight16(col) > 1)
-			return 1;
+			return true;
 
 		check |= col;
 	}
 
-	return 0;
+	return false;
 }
 
 static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
@@ -225,7 +229,8 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
 		if (!changed)
 			continue;
 
-		for (col = 0; col < kp->n_cols; col++) {
+		/* Extra column handles "all gnd" rows */
+		for (col = 0; col < kp->n_cols + 1; col++) {
 			int code;
 
 			if (!(changed & (1 << col)))
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 4ef764cc493..ee2bf6bcf29 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -258,7 +258,7 @@ static struct platform_driver w90p910_keypad_driver = {
 	.probe		= w90p910_keypad_probe,
 	.remove		= __devexit_p(w90p910_keypad_remove),
 	.driver		= {
-		.name	= "nuc900-keypad",
+		.name	= "nuc900-kpi",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c44b9eafc55..b49e2337972 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -327,6 +327,17 @@ config INPUT_PCF8574
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcf8574_keypad.
 
+config INPUT_PWM_BEEPER
+	tristate "PWM beeper support"
+	depends on HAVE_PWM
+	help
+	  Say Y here to get support for PWM based beeper devices.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pwm-beeper.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB && GENERIC_GPIO
@@ -390,4 +401,41 @@ config INPUT_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_keys.
 
+config INPUT_ADXL34X
+	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
+	default n
+	help
+	  Say Y here if you have a Accelerometer interface using the
+	  ADXL345/6 controller, and your board-specific initialization
+	  code includes that in its table of devices.
+
+	  This driver can use either I2C or SPI communication to the
+	  ADXL345/6 controller.  Select the appropriate method for
+	  your system.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x.
+
+config INPUT_ADXL34X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_ADXL34X && I2C
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-i2c.
+
+config INPUT_ADXL34X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_ADXL34X && SPI
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-spi.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 71fe57d8023..19ccca78fa7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
 obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
 obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
 obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
+obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
+obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
+obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
@@ -26,6 +29,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
index e9adbe49f6a..2bef8fa56c9 100644
--- a/drivers/input/misc/ad714x-i2c.c
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -97,7 +97,6 @@ static int __devexit ad714x_i2c_remove(struct i2c_client *client)
 	struct ad714x_chip *chip = i2c_get_clientdata(client);
 
 	ad714x_remove(chip);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
new file mode 100644
index 00000000000..0779724af7e
--- /dev/null
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -0,0 +1,163 @@
+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (I2C Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adxl34x_smbus_write(struct device *dev,
+			       unsigned char reg, unsigned char val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int adxl34x_smbus_read_block(struct device *dev,
+				    unsigned char reg, int count,
+				    void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_i2c_block_data(client, reg, count, buf);
+}
+
+static int adxl34x_i2c_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_master_send(client, &reg, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(client, buf, count);
+	if (ret < 0)
+		return ret;
+
+	if (ret != count)
+		return -EIO;
+
+	return 0;
+}
+
+static const struct adxl34x_bus_ops adxl34x_smbus_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_smbus_read_block,
+};
+
+static const struct adxl34x_bus_ops adxl34x_i2c_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_i2c_read_block,
+};
+
+static int __devinit adxl34x_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct adxl34x *ac;
+	int error;
+
+	error = i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA);
+	if (!error) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	ac = adxl34x_probe(&client->dev, client->irq, false,
+			   i2c_check_functionality(client->adapter,
+						   I2C_FUNC_SMBUS_READ_I2C_BLOCK) ?
+				&adxl34x_smbus_bops : &adxl34x_i2c_bops);
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	i2c_set_clientdata(client, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_i2c_resume(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_i2c_suspend NULL
+# define adxl34x_i2c_resume  NULL
+#endif
+
+static const struct i2c_device_id adxl34x_id[] = {
+	{ "adxl34x", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, adxl34x_id);
+
+static struct i2c_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.owner = THIS_MODULE,
+	},
+	.probe    = adxl34x_i2c_probe,
+	.remove   = __devexit_p(adxl34x_i2c_remove),
+	.suspend  = adxl34x_i2c_suspend,
+	.resume   = adxl34x_i2c_resume,
+	.id_table = adxl34x_id,
+};
+
+static int __init adxl34x_i2c_init(void)
+{
+	return i2c_add_driver(&adxl34x_driver);
+}
+module_init(adxl34x_i2c_init);
+
+static void __exit adxl34x_i2c_exit(void)
+{
+	i2c_del_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
new file mode 100644
index 00000000000..782de9e8982
--- /dev/null
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -0,0 +1,145 @@
+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+#define MAX_SPI_FREQ_HZ		5000000
+#define MAX_FREQ_NO_FIFODELAY	1500000
+#define ADXL34X_CMD_MULTB	(1 << 6)
+#define ADXL34X_CMD_READ	(1 << 7)
+#define ADXL34X_WRITECMD(reg)	(reg & 0x3F)
+#define ADXL34X_READCMD(reg)	(ADXL34X_CMD_READ | (reg & 0x3F))
+#define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \
+					| (reg & 0x3F))
+
+static int adxl34x_spi_read(struct device *dev, unsigned char reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char cmd;
+
+	cmd = ADXL34X_READCMD(reg);
+
+	return spi_w8r8(spi, cmd);
+}
+
+static int adxl34x_spi_write(struct device *dev,
+			     unsigned char reg, unsigned char val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = ADXL34X_WRITECMD(reg);
+	buf[1] = val;
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+static int adxl34x_spi_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	ssize_t status;
+
+	reg = ADXL34X_READMB_CMD(reg);
+	status = spi_write_then_read(spi, &reg, 1, buf, count);
+
+	return (status < 0) ? status : 0;
+}
+
+static const struct adxl34x_bus_ops adx134x_spi_bops = {
+	.bustype	= BUS_SPI,
+	.write		= adxl34x_spi_write,
+	.read		= adxl34x_spi_read,
+	.read_block	= adxl34x_spi_read_block,
+};
+
+static int __devinit adxl34x_spi_probe(struct spi_device *spi)
+{
+	struct adxl34x *ac;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	ac = adxl34x_probe(&spi->dev, spi->irq,
+			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
+			   &adx134x_spi_bops);
+
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	spi_set_drvdata(spi, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_spi_remove(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_spi_resume(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_spi_suspend NULL
+# define adxl34x_spi_resume  NULL
+#endif
+
+static struct spi_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe   = adxl34x_spi_probe,
+	.remove  = __devexit_p(adxl34x_spi_remove),
+	.suspend = adxl34x_spi_suspend,
+	.resume  = adxl34x_spi_resume,
+};
+
+static int __init adxl34x_spi_init(void)
+{
+	return spi_register_driver(&adxl34x_driver);
+}
+module_init(adxl34x_spi_init);
+
+static void __exit adxl34x_spi_exit(void)
+{
+	spi_unregister_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
new file mode 100644
index 00000000000..e2ca0170808
--- /dev/null
+++ b/drivers/input/misc/adxl34x.c
@@ -0,0 +1,915 @@
+/*
+ * ADXL345/346 Three-Axis Digital Accelerometers
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/input/adxl34x.h>
+
+#include "adxl34x.h"
+
+/* ADXL345/6 Register Map */
+#define DEVID		0x00	/* R   Device ID */
+#define THRESH_TAP	0x1D	/* R/W Tap threshold */
+#define OFSX		0x1E	/* R/W X-axis offset */
+#define OFSY		0x1F	/* R/W Y-axis offset */
+#define OFSZ		0x20	/* R/W Z-axis offset */
+#define DUR		0x21	/* R/W Tap duration */
+#define LATENT		0x22	/* R/W Tap latency */
+#define WINDOW		0x23	/* R/W Tap window */
+#define THRESH_ACT	0x24	/* R/W Activity threshold */
+#define THRESH_INACT	0x25	/* R/W Inactivity threshold */
+#define TIME_INACT	0x26	/* R/W Inactivity time */
+#define ACT_INACT_CTL	0x27	/* R/W Axis enable control for activity and */
+				/* inactivity detection */
+#define THRESH_FF	0x28	/* R/W Free-fall threshold */
+#define TIME_FF		0x29	/* R/W Free-fall time */
+#define TAP_AXES	0x2A	/* R/W Axis control for tap/double tap */
+#define ACT_TAP_STATUS	0x2B	/* R   Source of tap/double tap */
+#define BW_RATE		0x2C	/* R/W Data rate and power mode control */
+#define POWER_CTL	0x2D	/* R/W Power saving features control */
+#define INT_ENABLE	0x2E	/* R/W Interrupt enable control */
+#define INT_MAP		0x2F	/* R/W Interrupt mapping control */
+#define INT_SOURCE	0x30	/* R   Source of interrupts */
+#define DATA_FORMAT	0x31	/* R/W Data format control */
+#define DATAX0		0x32	/* R   X-Axis Data 0 */
+#define DATAX1		0x33	/* R   X-Axis Data 1 */
+#define DATAY0		0x34	/* R   Y-Axis Data 0 */
+#define DATAY1		0x35	/* R   Y-Axis Data 1 */
+#define DATAZ0		0x36	/* R   Z-Axis Data 0 */
+#define DATAZ1		0x37	/* R   Z-Axis Data 1 */
+#define FIFO_CTL	0x38	/* R/W FIFO control */
+#define FIFO_STATUS	0x39	/* R   FIFO status */
+#define TAP_SIGN	0x3A	/* R   Sign and source for tap/double tap */
+/* Orientation ADXL346 only */
+#define ORIENT_CONF	0x3B	/* R/W Orientation configuration */
+#define ORIENT		0x3C	/* R   Orientation status */
+
+/* DEVIDs */
+#define ID_ADXL345	0xE5
+#define ID_ADXL346	0xE6
+
+/* INT_ENABLE/INT_MAP/INT_SOURCE Bits */
+#define DATA_READY	(1 << 7)
+#define SINGLE_TAP	(1 << 6)
+#define DOUBLE_TAP	(1 << 5)
+#define ACTIVITY	(1 << 4)
+#define INACTIVITY	(1 << 3)
+#define FREE_FALL	(1 << 2)
+#define WATERMARK	(1 << 1)
+#define OVERRUN		(1 << 0)
+
+/* ACT_INACT_CONTROL Bits */
+#define ACT_ACDC	(1 << 7)
+#define ACT_X_EN	(1 << 6)
+#define ACT_Y_EN	(1 << 5)
+#define ACT_Z_EN	(1 << 4)
+#define INACT_ACDC	(1 << 3)
+#define INACT_X_EN	(1 << 2)
+#define INACT_Y_EN	(1 << 1)
+#define INACT_Z_EN	(1 << 0)
+
+/* TAP_AXES Bits */
+#define SUPPRESS	(1 << 3)
+#define TAP_X_EN	(1 << 2)
+#define TAP_Y_EN	(1 << 1)
+#define TAP_Z_EN	(1 << 0)
+
+/* ACT_TAP_STATUS Bits */
+#define ACT_X_SRC	(1 << 6)
+#define ACT_Y_SRC	(1 << 5)
+#define ACT_Z_SRC	(1 << 4)
+#define ASLEEP		(1 << 3)
+#define TAP_X_SRC	(1 << 2)
+#define TAP_Y_SRC	(1 << 1)
+#define TAP_Z_SRC	(1 << 0)
+
+/* BW_RATE Bits */
+#define LOW_POWER	(1 << 4)
+#define RATE(x)		((x) & 0xF)
+
+/* POWER_CTL Bits */
+#define PCTL_LINK	(1 << 5)
+#define PCTL_AUTO_SLEEP (1 << 4)
+#define PCTL_MEASURE	(1 << 3)
+#define PCTL_SLEEP	(1 << 2)
+#define PCTL_WAKEUP(x)	((x) & 0x3)
+
+/* DATA_FORMAT Bits */
+#define SELF_TEST	(1 << 7)
+#define SPI		(1 << 6)
+#define INT_INVERT	(1 << 5)
+#define FULL_RES	(1 << 3)
+#define JUSTIFY		(1 << 2)
+#define RANGE(x)	((x) & 0x3)
+#define RANGE_PM_2g	0
+#define RANGE_PM_4g	1
+#define RANGE_PM_8g	2
+#define RANGE_PM_16g	3
+
+/*
+ * Maximum value our axis may get in full res mode for the input device
+ * (signed 13 bits)
+ */
+#define ADXL_FULLRES_MAX_VAL 4096
+
+/*
+ * Maximum value our axis may get in fixed res mode for the input device
+ * (signed 10 bits)
+ */
+#define ADXL_FIXEDRES_MAX_VAL 512
+
+/* FIFO_CTL Bits */
+#define FIFO_MODE(x)	(((x) & 0x3) << 6)
+#define FIFO_BYPASS	0
+#define FIFO_FIFO	1
+#define FIFO_STREAM	2
+#define FIFO_TRIGGER	3
+#define TRIGGER		(1 << 5)
+#define SAMPLES(x)	((x) & 0x1F)
+
+/* FIFO_STATUS Bits */
+#define FIFO_TRIG	(1 << 7)
+#define ENTRIES(x)	((x) & 0x3F)
+
+/* TAP_SIGN Bits ADXL346 only */
+#define XSIGN		(1 << 6)
+#define YSIGN		(1 << 5)
+#define ZSIGN		(1 << 4)
+#define XTAP		(1 << 3)
+#define YTAP		(1 << 2)
+#define ZTAP		(1 << 1)
+
+/* ORIENT_CONF ADXL346 only */
+#define ORIENT_DEADZONE(x)	(((x) & 0x7) << 4)
+#define ORIENT_DIVISOR(x)	((x) & 0x7)
+
+/* ORIENT ADXL346 only */
+#define ADXL346_2D_VALID		(1 << 6)
+#define ADXL346_2D_ORIENT(x)		(((x) & 0x3) >> 4)
+#define ADXL346_3D_VALID		(1 << 3)
+#define ADXL346_3D_ORIENT(x)		((x) & 0x7)
+#define ADXL346_2D_PORTRAIT_POS		0	/* +X */
+#define ADXL346_2D_PORTRAIT_NEG		1	/* -X */
+#define ADXL346_2D_LANDSCAPE_POS	2	/* +Y */
+#define ADXL346_2D_LANDSCAPE_NEG	3	/* -Y */
+
+#define ADXL346_3D_FRONT		3	/* +X */
+#define ADXL346_3D_BACK			4	/* -X */
+#define ADXL346_3D_RIGHT		2	/* +Y */
+#define ADXL346_3D_LEFT			5	/* -Y */
+#define ADXL346_3D_TOP			1	/* +Z */
+#define ADXL346_3D_BOTTOM		6	/* -Z */
+
+#undef ADXL_DEBUG
+
+#define ADXL_X_AXIS			0
+#define ADXL_Y_AXIS			1
+#define ADXL_Z_AXIS			2
+
+#define AC_READ(ac, reg)	((ac)->bops->read((ac)->dev, reg))
+#define AC_WRITE(ac, reg, val)	((ac)->bops->write((ac)->dev, reg, val))
+
+struct axis_triple {
+	int x;
+	int y;
+	int z;
+};
+
+struct adxl34x {
+	struct device *dev;
+	struct input_dev *input;
+	struct mutex mutex;	/* reentrant protection for struct */
+	struct adxl34x_platform_data pdata;
+	struct axis_triple swcal;
+	struct axis_triple hwcal;
+	struct axis_triple saved;
+	char phys[32];
+	unsigned orient2d_saved;
+	unsigned orient3d_saved;
+	bool disabled;	/* P: mutex */
+	bool opened;	/* P: mutex */
+	bool suspended;	/* P: mutex */
+	bool fifo_delay;
+	int irq;
+	unsigned model;
+	unsigned int_mask;
+
+	const struct adxl34x_bus_ops *bops;
+};
+
+static const struct adxl34x_platform_data adxl34x_default_init = {
+	.tap_threshold = 35,
+	.tap_duration = 3,
+	.tap_latency = 20,
+	.tap_window = 20,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 6,
+	.inactivity_threshold = 4,
+	.inactivity_time = 3,
+	.free_fall_threshold = 8,
+	.free_fall_time = 0x20,
+	.data_rate = 8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,	/* EV_REL */
+	.ev_code_y = ABS_Y,	/* EV_REL */
+	.ev_code_z = ABS_Z,	/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY {x,y,z} */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = FIFO_STREAM,
+	.watermark = 0,
+};
+
+static void adxl34x_get_triple(struct adxl34x *ac, struct axis_triple *axis)
+{
+	short buf[3];
+
+	ac->bops->read_block(ac->dev, DATAX0, DATAZ1 - DATAX0 + 1, buf);
+
+	mutex_lock(&ac->mutex);
+	ac->saved.x = (s16) le16_to_cpu(buf[0]);
+	axis->x = ac->saved.x;
+
+	ac->saved.y = (s16) le16_to_cpu(buf[1]);
+	axis->y = ac->saved.y;
+
+	ac->saved.z = (s16) le16_to_cpu(buf[2]);
+	axis->z = ac->saved.z;
+	mutex_unlock(&ac->mutex);
+}
+
+static void adxl34x_service_ev_fifo(struct adxl34x *ac)
+{
+	struct adxl34x_platform_data *pdata = &ac->pdata;
+	struct axis_triple axis;
+
+	adxl34x_get_triple(ac, &axis);
+
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_x,
+		    axis.x - ac->swcal.x);
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_y,
+		    axis.y - ac->swcal.y);
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_z,
+		    axis.z - ac->swcal.z);
+}
+
+static void adxl34x_report_key_single(struct input_dev *input, int key)
+{
+	input_report_key(input, key, true);
+	input_sync(input);
+	input_report_key(input, key, false);
+}
+
+static void adxl34x_send_key_events(struct adxl34x *ac,
+		struct adxl34x_platform_data *pdata, int status, int press)
+{
+	int i;
+
+	for (i = ADXL_X_AXIS; i <= ADXL_Z_AXIS; i++) {
+		if (status & (1 << (ADXL_Z_AXIS - i)))
+			input_report_key(ac->input,
+					 pdata->ev_code_tap[i], press);
+	}
+}
+
+static void adxl34x_do_tap(struct adxl34x *ac,
+		struct adxl34x_platform_data *pdata, int status)
+{
+	adxl34x_send_key_events(ac, pdata, status, true);
+	input_sync(ac->input);
+	adxl34x_send_key_events(ac, pdata, status, false);
+}
+
+static irqreturn_t adxl34x_irq(int irq, void *handle)
+{
+	struct adxl34x *ac = handle;
+	struct adxl34x_platform_data *pdata = &ac->pdata;
+	int int_stat, tap_stat, samples, orient, orient_code;
+
+	/*
+	 * ACT_TAP_STATUS should be read before clearing the interrupt
+	 * Avoid reading ACT_TAP_STATUS in case TAP detection is disabled
+	 */
+
+	if (pdata->tap_axis_control & (TAP_X_EN | TAP_Y_EN | TAP_Z_EN))
+		tap_stat = AC_READ(ac, ACT_TAP_STATUS);
+	else
+		tap_stat = 0;
+
+	int_stat = AC_READ(ac, INT_SOURCE);
+
+	if (int_stat & FREE_FALL)
+		adxl34x_report_key_single(ac->input, pdata->ev_code_ff);
+
+	if (int_stat & OVERRUN)
+		dev_dbg(ac->dev, "OVERRUN\n");
+
+	if (int_stat & (SINGLE_TAP | DOUBLE_TAP)) {
+		adxl34x_do_tap(ac, pdata, tap_stat);
+
+		if (int_stat & DOUBLE_TAP)
+			adxl34x_do_tap(ac, pdata, tap_stat);
+	}
+
+	if (pdata->ev_code_act_inactivity) {
+		if (int_stat & ACTIVITY)
+			input_report_key(ac->input,
+					 pdata->ev_code_act_inactivity, 1);
+		if (int_stat & INACTIVITY)
+			input_report_key(ac->input,
+					 pdata->ev_code_act_inactivity, 0);
+	}
+
+	/*
+	 * ORIENTATION SENSING ADXL346 only
+	 */
+	if (pdata->orientation_enable) {
+		orient = AC_READ(ac, ORIENT);
+		if ((pdata->orientation_enable & ADXL_EN_ORIENTATION_2D) &&
+		    (orient & ADXL346_2D_VALID)) {
+
+			orient_code = ADXL346_2D_ORIENT(orient);
+			/* Report orientation only when it changes */
+			if (ac->orient2d_saved != orient_code) {
+				ac->orient2d_saved = orient_code;
+				adxl34x_report_key_single(ac->input,
+					pdata->ev_codes_orient_2d[orient_code]);
+			}
+		}
+
+		if ((pdata->orientation_enable & ADXL_EN_ORIENTATION_3D) &&
+		    (orient & ADXL346_3D_VALID)) {
+
+			orient_code = ADXL346_3D_ORIENT(orient) - 1;
+			/* Report orientation only when it changes */
+			if (ac->orient3d_saved != orient_code) {
+				ac->orient3d_saved = orient_code;
+				adxl34x_report_key_single(ac->input,
+					pdata->ev_codes_orient_3d[orient_code]);
+			}
+		}
+	}
+
+	if (int_stat & (DATA_READY | WATERMARK)) {
+
+		if (pdata->fifo_mode)
+			samples = ENTRIES(AC_READ(ac, FIFO_STATUS)) + 1;
+		else
+			samples = 1;
+
+		for (; samples > 0; samples--) {
+			adxl34x_service_ev_fifo(ac);
+			/*
+			 * To ensure that the FIFO has
+			 * completely popped, there must be at least 5 us between
+			 * the end of reading the data registers, signified by the
+			 * transition to register 0x38 from 0x37 or the CS pin
+			 * going high, and the start of new reads of the FIFO or
+			 * reading the FIFO_STATUS register. For SPI operation at
+			 * 1.5 MHz or lower, the register addressing portion of the
+			 * transmission is sufficient delay to ensure the FIFO has
+			 * completely popped. It is necessary for SPI operation
+			 * greater than 1.5 MHz to de-assert the CS pin to ensure a
+			 * total of 5 us, which is at most 3.4 us at 5 MHz
+			 * operation.
+			 */
+			if (ac->fifo_delay && (samples > 1))
+				udelay(3);
+		}
+	}
+
+	input_sync(ac->input);
+
+	return IRQ_HANDLED;
+}
+
+static void __adxl34x_disable(struct adxl34x *ac)
+{
+	/*
+	 * A '0' places the ADXL34x into standby mode
+	 * with minimum power consumption.
+	 */
+	AC_WRITE(ac, POWER_CTL, 0);
+}
+
+static void __adxl34x_enable(struct adxl34x *ac)
+{
+	AC_WRITE(ac, POWER_CTL, ac->pdata.power_mode | PCTL_MEASURE);
+}
+
+void adxl34x_suspend(struct adxl34x *ac)
+{
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled && ac->opened)
+		__adxl34x_disable(ac);
+
+	ac->suspended = true;
+
+	mutex_unlock(&ac->mutex);
+}
+EXPORT_SYMBOL_GPL(adxl34x_suspend);
+
+void adxl34x_resume(struct adxl34x *ac)
+{
+	mutex_lock(&ac->mutex);
+
+	if (ac->suspended && !ac->disabled && ac->opened)
+		__adxl34x_enable(ac);
+
+	ac->suspended = false;
+
+	mutex_unlock(&ac->mutex);
+}
+EXPORT_SYMBOL_GPL(adxl34x_resume);
+
+static ssize_t adxl34x_disable_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ac->disabled);
+}
+
+static ssize_t adxl34x_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && ac->opened) {
+		if (val) {
+			if (!ac->disabled)
+				__adxl34x_disable(ac);
+		} else {
+			if (ac->disabled)
+				__adxl34x_enable(ac);
+		}
+	}
+
+	ac->disabled = !!val;
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, adxl34x_disable_show, adxl34x_disable_store);
+
+static ssize_t adxl34x_calibrate_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	ssize_t count;
+
+	mutex_lock(&ac->mutex);
+	count = sprintf(buf, "%d,%d,%d\n",
+			ac->hwcal.x * 4 + ac->swcal.x,
+			ac->hwcal.y * 4 + ac->swcal.y,
+			ac->hwcal.z * 4 + ac->swcal.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static ssize_t adxl34x_calibrate_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	/*
+	 * Hardware offset calibration has a resolution of 15.6 mg/LSB.
+	 * We use HW calibration and handle the remaining bits in SW. (4mg/LSB)
+	 */
+
+	mutex_lock(&ac->mutex);
+	ac->hwcal.x -= (ac->saved.x / 4);
+	ac->swcal.x = ac->saved.x % 4;
+
+	ac->hwcal.y -= (ac->saved.y / 4);
+	ac->swcal.y = ac->saved.y % 4;
+
+	ac->hwcal.z -= (ac->saved.z / 4);
+	ac->swcal.z = ac->saved.z % 4;
+
+	AC_WRITE(ac, OFSX, (s8) ac->hwcal.x);
+	AC_WRITE(ac, OFSY, (s8) ac->hwcal.y);
+	AC_WRITE(ac, OFSZ, (s8) ac->hwcal.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(calibrate, 0664,
+		   adxl34x_calibrate_show, adxl34x_calibrate_store);
+
+static ssize_t adxl34x_rate_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", RATE(ac->pdata.data_rate));
+}
+
+static ssize_t adxl34x_rate_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	ac->pdata.data_rate = RATE(val);
+	AC_WRITE(ac, BW_RATE,
+		 ac->pdata.data_rate |
+			(ac->pdata.low_power_mode ? LOW_POWER : 0));
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(rate, 0664, adxl34x_rate_show, adxl34x_rate_store);
+
+static ssize_t adxl34x_autosleep_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n",
+		ac->pdata.power_mode & (PCTL_AUTO_SLEEP | PCTL_LINK) ? 1 : 0);
+}
+
+static ssize_t adxl34x_autosleep_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	if (val)
+		ac->pdata.power_mode |= (PCTL_AUTO_SLEEP | PCTL_LINK);
+	else
+		ac->pdata.power_mode &= ~(PCTL_AUTO_SLEEP | PCTL_LINK);
+
+	if (!ac->disabled && !ac->suspended && ac->opened)
+		AC_WRITE(ac, POWER_CTL, ac->pdata.power_mode | PCTL_MEASURE);
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(autosleep, 0664,
+		   adxl34x_autosleep_show, adxl34x_autosleep_store);
+
+static ssize_t adxl34x_position_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	ssize_t count;
+
+	mutex_lock(&ac->mutex);
+	count = sprintf(buf, "(%d, %d, %d)\n",
+			ac->saved.x, ac->saved.y, ac->saved.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(position, S_IRUGO, adxl34x_position_show, NULL);
+
+#ifdef ADXL_DEBUG
+static ssize_t adxl34x_write_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	/*
+	 * This allows basic ADXL register write access for debug purposes.
+	 */
+	error = strict_strtoul(buf, 16, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+	AC_WRITE(ac, val >> 8, val & 0xFF);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(write, 0664, NULL, adxl34x_write_store);
+#endif
+
+static struct attribute *adxl34x_attributes[] = {
+	&dev_attr_disable.attr,
+	&dev_attr_calibrate.attr,
+	&dev_attr_rate.attr,
+	&dev_attr_autosleep.attr,
+	&dev_attr_position.attr,
+#ifdef ADXL_DEBUG
+	&dev_attr_write.attr,
+#endif
+	NULL
+};
+
+static const struct attribute_group adxl34x_attr_group = {
+	.attrs = adxl34x_attributes,
+};
+
+static int adxl34x_input_open(struct input_dev *input)
+{
+	struct adxl34x *ac = input_get_drvdata(input);
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled)
+		__adxl34x_enable(ac);
+
+	ac->opened = true;
+
+	mutex_unlock(&ac->mutex);
+
+	return 0;
+}
+
+static void adxl34x_input_close(struct input_dev *input)
+{
+	struct adxl34x *ac = input_get_drvdata(input);
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled)
+		__adxl34x_disable(ac);
+
+	ac->opened = false;
+
+	mutex_unlock(&ac->mutex);
+}
+
+struct adxl34x *adxl34x_probe(struct device *dev, int irq,
+			      bool fifo_delay_default,
+			      const struct adxl34x_bus_ops *bops)
+{
+	struct adxl34x *ac;
+	struct input_dev *input_dev;
+	const struct adxl34x_platform_data *pdata;
+	int err, range, i;
+	unsigned char revid;
+
+	if (!irq) {
+		dev_err(dev, "no IRQ?\n");
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	ac = kzalloc(sizeof(*ac), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ac || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ac->fifo_delay = fifo_delay_default;
+
+	pdata = dev->platform_data;
+	if (!pdata) {
+		dev_dbg(dev,
+			"No platfrom data: Using default initialization\n");
+		pdata = &adxl34x_default_init;
+	}
+
+	ac->pdata = *pdata;
+	pdata = &ac->pdata;
+
+	ac->input = input_dev;
+	ac->disabled = true;
+	ac->dev = dev;
+	ac->irq = irq;
+	ac->bops = bops;
+
+	mutex_init(&ac->mutex);
+
+	input_dev->name = "ADXL34x accelerometer";
+	revid = ac->bops->read(dev, DEVID);
+
+	switch (revid) {
+	case ID_ADXL345:
+		ac->model = 345;
+		break;
+	case ID_ADXL346:
+		ac->model = 346;
+		break;
+	default:
+		dev_err(dev, "Failed to probe %s\n", input_dev->name);
+		err = -ENODEV;
+		goto err_free_mem;
+	}
+
+	snprintf(ac->phys, sizeof(ac->phys), "%s/input0", dev_name(dev));
+
+	input_dev->phys = ac->phys;
+	input_dev->dev.parent = dev;
+	input_dev->id.product = ac->model;
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = adxl34x_input_open;
+	input_dev->close = adxl34x_input_close;
+
+	input_set_drvdata(input_dev, ac);
+
+	__set_bit(ac->pdata.ev_type, input_dev->evbit);
+
+	if (ac->pdata.ev_type == EV_REL) {
+		__set_bit(REL_X, input_dev->relbit);
+		__set_bit(REL_Y, input_dev->relbit);
+		__set_bit(REL_Z, input_dev->relbit);
+	} else {
+		/* EV_ABS */
+		__set_bit(ABS_X, input_dev->absbit);
+		__set_bit(ABS_Y, input_dev->absbit);
+		__set_bit(ABS_Z, input_dev->absbit);
+
+		if (pdata->data_range & FULL_RES)
+			range = ADXL_FULLRES_MAX_VAL;	/* Signed 13-bit */
+		else
+			range = ADXL_FIXEDRES_MAX_VAL;	/* Signed 10-bit */
+
+		input_set_abs_params(input_dev, ABS_X, -range, range, 3, 3);
+		input_set_abs_params(input_dev, ABS_Y, -range, range, 3, 3);
+		input_set_abs_params(input_dev, ABS_Z, -range, range, 3, 3);
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(pdata->ev_code_tap[ADXL_X_AXIS], input_dev->keybit);
+	__set_bit(pdata->ev_code_tap[ADXL_Y_AXIS], input_dev->keybit);
+	__set_bit(pdata->ev_code_tap[ADXL_Z_AXIS], input_dev->keybit);
+
+	if (pdata->ev_code_ff) {
+		ac->int_mask = FREE_FALL;
+		__set_bit(pdata->ev_code_ff, input_dev->keybit);
+	}
+
+	if (pdata->ev_code_act_inactivity)
+		__set_bit(pdata->ev_code_act_inactivity, input_dev->keybit);
+
+	ac->int_mask |= ACTIVITY | INACTIVITY;
+
+	if (pdata->watermark) {
+		ac->int_mask |= WATERMARK;
+		if (!FIFO_MODE(pdata->fifo_mode))
+			ac->pdata.fifo_mode |= FIFO_STREAM;
+	} else {
+		ac->int_mask |= DATA_READY;
+	}
+
+	if (pdata->tap_axis_control & (TAP_X_EN | TAP_Y_EN | TAP_Z_EN))
+		ac->int_mask |= SINGLE_TAP | DOUBLE_TAP;
+
+	if (FIFO_MODE(pdata->fifo_mode) == FIFO_BYPASS)
+		ac->fifo_delay = false;
+
+	ac->bops->write(dev, POWER_CTL, 0);
+
+	err = request_threaded_irq(ac->irq, NULL, adxl34x_irq,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   dev_name(dev), ac);
+	if (err) {
+		dev_err(dev, "irq %d busy?\n", ac->irq);
+		goto err_free_mem;
+	}
+
+	err = sysfs_create_group(&dev->kobj, &adxl34x_attr_group);
+	if (err)
+		goto err_free_irq;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_attr;
+
+	AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
+	AC_WRITE(ac, OFSX, pdata->x_axis_offset);
+	ac->hwcal.x = pdata->x_axis_offset;
+	AC_WRITE(ac, OFSY, pdata->y_axis_offset);
+	ac->hwcal.y = pdata->y_axis_offset;
+	AC_WRITE(ac, OFSZ, pdata->z_axis_offset);
+	ac->hwcal.z = pdata->z_axis_offset;
+	AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
+	AC_WRITE(ac, DUR, pdata->tap_duration);
+	AC_WRITE(ac, LATENT, pdata->tap_latency);
+	AC_WRITE(ac, WINDOW, pdata->tap_window);
+	AC_WRITE(ac, THRESH_ACT, pdata->activity_threshold);
+	AC_WRITE(ac, THRESH_INACT, pdata->inactivity_threshold);
+	AC_WRITE(ac, TIME_INACT, pdata->inactivity_time);
+	AC_WRITE(ac, THRESH_FF, pdata->free_fall_threshold);
+	AC_WRITE(ac, TIME_FF, pdata->free_fall_time);
+	AC_WRITE(ac, TAP_AXES, pdata->tap_axis_control);
+	AC_WRITE(ac, ACT_INACT_CTL, pdata->act_axis_control);
+	AC_WRITE(ac, BW_RATE, RATE(ac->pdata.data_rate) |
+		 (pdata->low_power_mode ? LOW_POWER : 0));
+	AC_WRITE(ac, DATA_FORMAT, pdata->data_range);
+	AC_WRITE(ac, FIFO_CTL, FIFO_MODE(pdata->fifo_mode) |
+			SAMPLES(pdata->watermark));
+
+	if (pdata->use_int2) {
+		/* Map all INTs to INT2 */
+		AC_WRITE(ac, INT_MAP, ac->int_mask | OVERRUN);
+	} else {
+		/* Map all INTs to INT1 */
+		AC_WRITE(ac, INT_MAP, 0);
+	}
+
+	if (ac->model == 346 && ac->pdata.orientation_enable) {
+		AC_WRITE(ac, ORIENT_CONF,
+			ORIENT_DEADZONE(ac->pdata.deadzone_angle) |
+			ORIENT_DIVISOR(ac->pdata.divisor_length));
+
+		ac->orient2d_saved = 1234;
+		ac->orient3d_saved = 1234;
+
+		if (pdata->orientation_enable & ADXL_EN_ORIENTATION_3D)
+			for (i = 0; i < ARRAY_SIZE(pdata->ev_codes_orient_3d); i++)
+				__set_bit(pdata->ev_codes_orient_3d[i],
+					  input_dev->keybit);
+
+		if (pdata->orientation_enable & ADXL_EN_ORIENTATION_2D)
+			for (i = 0; i < ARRAY_SIZE(pdata->ev_codes_orient_2d); i++)
+				__set_bit(pdata->ev_codes_orient_2d[i],
+					  input_dev->keybit);
+	} else {
+		ac->pdata.orientation_enable = 0;
+	}
+
+	AC_WRITE(ac, INT_ENABLE, ac->int_mask | OVERRUN);
+
+	ac->pdata.power_mode &= (PCTL_AUTO_SLEEP | PCTL_LINK);
+
+	return ac;
+
+ err_remove_attr:
+	sysfs_remove_group(&dev->kobj, &adxl34x_attr_group);
+ err_free_irq:
+	free_irq(ac->irq, ac);
+ err_free_mem:
+	input_free_device(input_dev);
+	kfree(ac);
+ err_out:
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(adxl34x_probe);
+
+int adxl34x_remove(struct adxl34x *ac)
+{
+	sysfs_remove_group(&ac->dev->kobj, &adxl34x_attr_group);
+	free_irq(ac->irq, ac);
+	input_unregister_device(ac->input);
+	dev_dbg(ac->dev, "unregistered accelerometer\n");
+	kfree(ac);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(adxl34x_remove);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x.h b/drivers/input/misc/adxl34x.h
new file mode 100644
index 00000000000..bbbc80fda16
--- /dev/null
+++ b/drivers/input/misc/adxl34x.h
@@ -0,0 +1,30 @@
+/*
+ * ADXL345/346 Three-Axis Digital Accelerometers (I2C/SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADXL34X_H_
+#define _ADXL34X_H_
+
+struct device;
+struct adxl34x;
+
+struct adxl34x_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *, unsigned char);
+	int (*read_block)(struct device *, unsigned char, int, void *);
+	int (*write)(struct device *, unsigned char, unsigned char);
+};
+
+void adxl34x_suspend(struct adxl34x *ac);
+void adxl34x_resume(struct adxl34x *ac);
+struct adxl34x *adxl34x_probe(struct device *dev, int irq,
+			      bool fifo_delay_default,
+			      const struct adxl34x_bus_ops *bops);
+int adxl34x_remove(struct adxl34x *ac);
+
+#endif
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index dfaa9a045ed..601f7372f9c 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -21,6 +21,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -60,12 +62,11 @@ static acpi_status acpi_atlas_button_handler(u32 function,
 		input_report_key(input_dev, atlas_keymap[code], key_down);
 		input_sync(input_dev);
 
-		status = 0;
+		status = AE_OK;
 	} else {
-		printk(KERN_WARNING "atlas: shrugged on unexpected function"
-			":function=%x,address=%lx,value=%x\n",
+		pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n",
 			function, (unsigned long)address, (u32)*value);
-		status = -EINVAL;
+		status = AE_BAD_PARAMETER;
 	}
 
 	return status;
@@ -79,7 +80,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	input_dev = input_allocate_device();
 	if (!input_dev) {
-		printk(KERN_ERR "atlas: unable to allocate input device\n");
+		pr_err("unable to allocate input device\n");
 		return -ENOMEM;
 	}
 
@@ -102,7 +103,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	err = input_register_device(input_dev);
 	if (err) {
-		printk(KERN_ERR "atlas: couldn't register input device\n");
+		pr_err("couldn't register input device\n");
 		input_free_device(input_dev);
 		return err;
 	}
@@ -112,12 +113,12 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 				0x81, &acpi_atlas_button_handler,
 				&acpi_atlas_button_setup, device);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error installing addr spc handler\n");
+		pr_err("error installing addr spc handler\n");
 		input_unregister_device(input_dev);
-		status = -EINVAL;
+		err = -EINVAL;
 	}
 
-	return status;
+	return err;
 }
 
 static int atlas_acpi_button_remove(struct acpi_device *device, int type)
@@ -126,14 +127,12 @@ static int atlas_acpi_button_remove(struct acpi_device *device, int type)
 
 	status = acpi_remove_address_space_handler(device->handle,
 				0x81, &acpi_atlas_button_handler);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error removing addr spc handler\n");
-		status = -EINVAL;
-	}
+	if (ACPI_FAILURE(status))
+		pr_err("error removing addr spc handler\n");
 
 	input_unregister_device(input_dev);
 
-	return status;
+	return 0;
 }
 
 static const struct acpi_device_id atlas_device_ids[] = {
@@ -145,6 +144,7 @@ MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
 static struct acpi_driver atlas_acpi_driver = {
 	.name	= ACPI_ATLAS_NAME,
 	.class	= ACPI_ATLAS_CLASS,
+	.owner	= THIS_MODULE,
 	.ids	= atlas_device_ids,
 	.ops	= {
 		.add	= atlas_acpi_button_add,
@@ -154,18 +154,10 @@ static struct acpi_driver atlas_acpi_driver = {
 
 static int __init atlas_acpi_init(void)
 {
-	int result;
-
 	if (acpi_disabled)
 		return -ENODEV;
 
-	result = acpi_bus_register_driver(&atlas_acpi_driver);
-	if (result < 0) {
-		printk(KERN_ERR "Atlas ACPI: Unable to register driver\n");
-		return -ENODEV;
-	}
-
-	return 0;
+	return acpi_bus_register_driver(&atlas_acpi_driver);
 }
 
 static void __exit atlas_acpi_exit(void)
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index e00a1cc79c0..c1906647905 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -678,7 +678,7 @@ static const struct file_operations hp_sdc_rtc_fops = {
         .llseek =		no_llseek,
         .read =			hp_sdc_rtc_read,
         .poll =			hp_sdc_rtc_poll,
-        .unlocked_ioctl = 	hp_sdc_rtc_ioctl,
+        .unlocked_ioctl =	hp_sdc_rtc_unlocked_ioctl,
         .open =			hp_sdc_rtc_open,
         .fasync =		hp_sdc_rtc_fasync,
 };
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 5c3ac4e0b05..4b42ffc0532 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -69,7 +69,7 @@ static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id)
 	unsigned char nextstate = read_state(lp);
 
 	if (lp->laststate != nextstate) {
-		int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+		int key_down = nextstate < ARRAY_SIZE(lp->btncode);
 		unsigned short keycode = key_down ?
 			lp->btncode[nextstate] : lp->btncode[lp->laststate];
 
@@ -168,8 +168,6 @@ static int __devexit pcf8574_kp_remove(struct i2c_client *client)
 	input_unregister_device(lp->idev);
 	kfree(lp);
 
-	i2c_set_clientdata(client, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
new file mode 100644
index 00000000000..57c294f0719
--- /dev/null
+++ b/drivers/input/misc/pwm-beeper.c
@@ -0,0 +1,199 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  PWM beeper driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct pwm_beeper {
+	struct input_dev *input;
+	struct pwm_device *pwm;
+	unsigned long period;
+};
+
+#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+
+static int pwm_beeper_event(struct input_dev *input,
+			    unsigned int type, unsigned int code, int value)
+{
+	int ret = 0;
+	struct pwm_beeper *beeper = input_get_drvdata(input);
+	unsigned long period;
+
+	if (type != EV_SND || value < 0)
+		return -EINVAL;
+
+	switch (code) {
+	case SND_BELL:
+		value = value ? 1000 : 0;
+		break;
+	case SND_TONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (value == 0) {
+		pwm_config(beeper->pwm, 0, 0);
+		pwm_disable(beeper->pwm);
+	} else {
+		period = HZ_TO_NANOSECONDS(value);
+		ret = pwm_config(beeper->pwm, period / 2, period);
+		if (ret)
+			return ret;
+		ret = pwm_enable(beeper->pwm);
+		if (ret)
+			return ret;
+		beeper->period = period;
+	}
+
+	return 0;
+}
+
+static int __devinit pwm_beeper_probe(struct platform_device *pdev)
+{
+	unsigned long pwm_id = (unsigned long)pdev->dev.platform_data;
+	struct pwm_beeper *beeper;
+	int error;
+
+	beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
+	if (!beeper)
+		return -ENOMEM;
+
+	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+
+	if (IS_ERR(beeper->pwm)) {
+		error = PTR_ERR(beeper->pwm);
+		dev_err(&pdev->dev, "Failed to request pwm device: %d\n", error);
+		goto err_free;
+	}
+
+	beeper->input = input_allocate_device();
+	if (!beeper->input) {
+		dev_err(&pdev->dev, "Failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_pwm_free;
+	}
+	beeper->input->dev.parent = &pdev->dev;
+
+	beeper->input->name = "pwm-beeper";
+	beeper->input->phys = "pwm/input0";
+	beeper->input->id.bustype = BUS_HOST;
+	beeper->input->id.vendor = 0x001f;
+	beeper->input->id.product = 0x0001;
+	beeper->input->id.version = 0x0100;
+
+	beeper->input->evbit[0] = BIT(EV_SND);
+	beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
+
+	beeper->input->event = pwm_beeper_event;
+
+	input_set_drvdata(beeper->input, beeper);
+
+	error = input_register_device(beeper->input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to register input device: %d\n", error);
+		goto err_input_free;
+	}
+
+	platform_set_drvdata(pdev, beeper);
+
+	return 0;
+
+err_input_free:
+	input_free_device(beeper->input);
+err_pwm_free:
+	pwm_free(beeper->pwm);
+err_free:
+	kfree(beeper);
+
+	return error;
+}
+
+static int __devexit pwm_beeper_remove(struct platform_device *pdev)
+{
+	struct pwm_beeper *beeper = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	input_unregister_device(beeper->input);
+
+	pwm_disable(beeper->pwm);
+	pwm_free(beeper->pwm);
+
+	kfree(beeper);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pwm_beeper_suspend(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period)
+		pwm_disable(beeper->pwm);
+
+	return 0;
+}
+
+static int pwm_beeper_resume(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period) {
+		pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
+		pwm_enable(beeper->pwm);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
+			 pwm_beeper_suspend, pwm_beeper_resume);
+
+#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
+#else
+#define PWM_BEEPER_PM_OPS NULL
+#endif
+
+static struct platform_driver pwm_beeper_driver = {
+	.probe	= pwm_beeper_probe,
+	.remove = __devexit_p(pwm_beeper_remove),
+	.driver = {
+		.name	= "pwm-beeper",
+		.owner	= THIS_MODULE,
+		.pm	= PWM_BEEPER_PM_OPS,
+	},
+};
+
+static int __init pwm_beeper_init(void)
+{
+	return platform_driver_register(&pwm_beeper_driver);
+}
+module_init(pwm_beeper_init);
+
+static void __exit pwm_beeper_exit(void)
+{
+	platform_driver_unregister(&pwm_beeper_driver);
+}
+module_exit(pwm_beeper_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PWM beeper driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-beeper");
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index e9069b87fde..f16972bddca 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
 	int irq = platform_get_irq(pdev, 0);
@@ -95,7 +95,7 @@ free_input_dev:
 	return err;
 }
 
-static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
+static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
 {
 	struct input_dev *pwr = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
@@ -106,9 +106,8 @@ static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct platform_driver twl4030_pwrbutton_driver = {
-	.probe		= twl4030_pwrbutton_probe,
-	.remove		= __devexit_p(twl4030_pwrbutton_remove),
+static struct platform_driver twl4030_pwrbutton_driver = {
+	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
@@ -117,7 +116,8 @@ struct platform_driver twl4030_pwrbutton_driver = {
 
 static int __init twl4030_pwrbutton_init(void)
 {
-	return platform_driver_register(&twl4030_pwrbutton_driver);
+	return platform_driver_probe(&twl4030_pwrbutton_driver,
+			twl4030_pwrbutton_probe);
 }
 module_init(twl4030_pwrbutton_init);
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4dac8b79fcd..12501de0c5c 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -1347,7 +1347,7 @@ static int __init wb_module_init(void)
 
 	err = map_bios();
 	if (err)
-		return err;
+		goto err_free_keymap;
 
 	err = platform_driver_register(&wistron_driver);
 	if (err)
@@ -1371,6 +1371,8 @@ static int __init wb_module_init(void)
 	platform_driver_unregister(&wistron_driver);
  err_unmap_bios:
 	unmap_bios();
+ err_free_keymap:
+	kfree(keymap);
 
 	return err;
 }
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index eeb58c1cac1..c714ca2407f 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -17,7 +17,7 @@ config MOUSE_PS2
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86 && !X86_MRST
+	select SERIO_I8042 if X86
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you have a PS/2 mouse connected to your system. This
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 6dedded2722..ea67c49146a 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -312,6 +312,8 @@ static void setup_events_to_report(struct input_dev *input_dev,
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
 	__set_bit(BTN_LEFT, input_dev->keybit);
+
+	input_set_events_per_packet(input_dev, 60);
 }
 
 /* report button data as logical button state */
@@ -580,23 +582,30 @@ exit:
  */
 static int bcm5974_start_traffic(struct bcm5974 *dev)
 {
-	if (bcm5974_wellspring_mode(dev, true)) {
+	int error;
+
+	error = bcm5974_wellspring_mode(dev, true);
+	if (error) {
 		dprintk(1, "bcm5974: mode switch failed\n");
-		goto error;
+		goto err_out;
 	}
 
-	if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
-		goto error;
+	error = usb_submit_urb(dev->bt_urb, GFP_KERNEL);
+	if (error)
+		goto err_reset_mode;
 
-	if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+	error = usb_submit_urb(dev->tp_urb, GFP_KERNEL);
+	if (error)
 		goto err_kill_bt;
 
 	return 0;
 
 err_kill_bt:
 	usb_kill_urb(dev->bt_urb);
-error:
-	return -EIO;
+err_reset_mode:
+	bcm5974_wellspring_mode(dev, false);
+err_out:
+	return error;
 }
 
 static void bcm5974_pause_traffic(struct bcm5974 *dev)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 40cea334ad1..8c324403b9f 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -141,8 +141,13 @@ static int synaptics_capability(struct psmouse *psmouse)
 	priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
 	priv->ext_cap = priv->ext_cap_0c = 0;
 
-	if (!SYN_CAP_VALID(priv->capabilities))
+	/*
+	 * Older firmwares had submodel ID fixed to 0x47
+	 */
+	if (SYN_ID_FULL(priv->identity) < 0x705 &&
+	    SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
 		return -1;
+	}
 
 	/*
 	 * Unless capExtended is set the rest of the flags should be ignored
@@ -206,6 +211,7 @@ static int synaptics_resolution(struct psmouse *psmouse)
 	unsigned char max[3];
 
 	if (SYN_ID_MAJOR(priv->identity) < 4)
+		return 0;
 
 	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
 		if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
@@ -496,7 +502,9 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	}
 	input_report_abs(dev, ABS_PRESSURE, hw.z);
 
-	input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
+	if (SYN_CAP_PALMDETECT(priv->capabilities))
+		input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
+
 	input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
 	input_report_key(dev, BTN_LEFT, hw.left);
 	input_report_key(dev, BTN_RIGHT, hw.right);
@@ -596,7 +604,9 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_set_abs_params(dev, ABS_Y,
 			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
-	__set_bit(ABS_TOOL_WIDTH, dev->absbit);
+
+	if (SYN_CAP_PALMDETECT(priv->capabilities))
+		input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 
 	__set_bit(EV_KEY, dev->evbit);
 	__set_bit(BTN_TOUCH, dev->keybit);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 7d4d5e12c0d..b6aa7d20d8a 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -47,7 +47,7 @@
 #define SYN_CAP_FOUR_BUTTON(c)		((c) & (1 << 3))
 #define SYN_CAP_MULTIFINGER(c)		((c) & (1 << 1))
 #define SYN_CAP_PALMDETECT(c)		((c) & (1 << 0))
-#define SYN_CAP_VALID(c)		((((c) & 0x00ff00) >> 8) == 0x47)
+#define SYN_CAP_SUBMODEL_ID(c)		(((c) & 0x00ff00) >> 8)
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
@@ -66,6 +66,7 @@
 #define SYN_ID_MODEL(i)			(((i) >> 4) & 0x0f)
 #define SYN_ID_MAJOR(i)			((i) & 0x0f)
 #define SYN_ID_MINOR(i)			(((i) >> 16) & 0xff)
+#define SYN_ID_FULL(i)			((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
 #define SYN_ID_IS_SYNAPTICS(i)		((((i) >> 8) & 0xff) == 0x47)
 
 /* synaptics special commands */
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index 8291e7399ff..0ae62f0bcb3 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -613,7 +613,6 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client)
 		free_irq(client->irq, touch);
 
 	input_unregister_device(touch->input);
-	i2c_set_clientdata(client, NULL);
 	kfree(touch);
 
 	return 0;
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index f34b22bce4f..d8f68f77007 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -57,7 +57,6 @@ struct mousedev_hw_data {
 };
 
 struct mousedev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -66,6 +65,7 @@ struct mousedev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 
 	struct list_head mixdev_node;
 	int mixdev_open;
@@ -765,10 +765,15 @@ static unsigned int mousedev_poll(struct file *file, poll_table *wait)
 {
 	struct mousedev_client *client = file->private_data;
 	struct mousedev *mousedev = client->mousedev;
+	unsigned int mask;
 
 	poll_wait(file, &mousedev->wait, wait);
-	return ((client->ready || client->buffer) ? (POLLIN | POLLRDNORM) : 0) |
-		(mousedev->exist ? 0 : (POLLHUP | POLLERR));
+
+	mask = mousedev->exist ? POLLOUT | POLLWRNORM : POLLHUP | POLLERR;
+	if (client->ready || client->buffer)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
 }
 
 static const struct file_operations mousedev_fops = {
@@ -802,7 +807,7 @@ static void mousedev_remove_chrdev(struct mousedev *mousedev)
 static void mousedev_mark_dead(struct mousedev *mousedev)
 {
 	mutex_lock(&mousedev->mutex);
-	mousedev->exist = 0;
+	mousedev->exist = false;
 	mutex_unlock(&mousedev->mutex);
 }
 
@@ -862,7 +867,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
 		dev_set_name(&mousedev->dev, "mouse%d", minor);
 
 	mousedev->minor = minor;
-	mousedev->exist = 1;
+	mousedev->exist = true;
 	mousedev->handle.dev = input_get_device(dev);
 	mousedev->handle.name = dev_name(&mousedev->dev);
 	mousedev->handle.handler = handler;
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f34f1dbeb57..3bfe8fafc6a 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,8 @@ if SERIO
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
-	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
+	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
index 2906e1b60c0..f708c75d16f 100644
--- a/drivers/input/serio/i8042-ppcio.h
+++ b/drivers/input/serio/i8042-ppcio.h
@@ -52,81 +52,6 @@ static inline void i8042_platform_exit(void)
 {
 }
 
-#elif defined(CONFIG_SPRUCE)
-
-#define I8042_KBD_IRQ 22
-#define I8042_AUX_IRQ 21
-
-#define I8042_KBD_PHYS_DESC "spruceps2/serio0"
-#define I8042_AUX_PHYS_DESC "spruceps2/serio1"
-#define I8042_MUX_PHYS_DESC "spruceps2/serio%d"
-
-#define I8042_COMMAND_REG 0xff810000
-#define I8042_DATA_REG 0xff810001
-
-static inline int i8042_read_data(void)
-{
-	unsigned long kbd_data;
-
-	__raw_writel(0x00000088, 0xff500008);
-	eieio();
-
-	__raw_writel(0x03000000, 0xff50000c);
-	eieio();
-
-	asm volatile("lis     7,0xff88        \n\
-		      lswi    6,7,0x8         \n\
-		      mr      %0,6"
-	              : "=r" (kbd_data) :: "6", "7");
-
-	__raw_writel(0x00000000, 0xff50000c);
-	eieio();
-
-	return (unsigned char)(kbd_data >> 24);
-}
-
-static inline int i8042_read_status(void)
-{
-	unsigned long kbd_status;
-
-	__raw_writel(0x00000088, 0xff500008);
-	eieio();
-
-	__raw_writel(0x03000000, 0xff50000c);
-	eieio();
-
-	asm volatile("lis     7,0xff88        \n\
-		      ori     7,7,0x8         \n\
-		      lswi    6,7,0x8         \n\
-		      mr      %0,6"
-		      : "=r" (kbd_status) :: "6", "7");
-
-	__raw_writel(0x00000000, 0xff50000c);
-	eieio();
-
-	return (unsigned char)(kbd_status >> 24);
-}
-
-static inline void i8042_write_data(int val)
-{
-	*((unsigned char *)0xff810000) = (char)val;
-}
-
-static inline void i8042_write_command(int val)
-{
-	*((unsigned char *)0xff810001) = (char)val;
-}
-
-static inline int i8042_platform_init(void)
-{
-	i8042_reset = 1;
-	return 0;
-}
-
-static inline void i8042_platform_exit(void)
-{
-}
-
 #else
 
 #include "i8042-io.h"
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6168469ad1a..ed7ad7416b2 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -7,6 +7,10 @@
  * the Free Software Foundation.
  */
 
+#ifdef CONFIG_X86
+#include <asm/x86_init.h>
+#endif
+
 /*
  * Names.
  */
@@ -166,6 +170,13 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
+		/* Gigabyte Spring Peak - defines wrong chassis type */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+		},
+	},
+	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
@@ -840,6 +851,12 @@ static int __init i8042_platform_init(void)
 {
 	int retval;
 
+#ifdef CONFIG_X86
+	/* Just return if pre-detection shows no i8042 controller exist */
+	if (!x86_platform.i8042_detect())
+		return -ENODEV;
+#endif
+
 /*
  * On ix86 platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on ix86 boxes.
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 6440a8f5568..258b98b9d7c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -861,9 +861,6 @@ static int i8042_controller_selftest(void)
 	unsigned char param;
 	int i = 0;
 
-	if (!i8042_reset)
-		return 0;
-
 	/*
 	 * We try this 5 times; on some really fragile systems this does not
 	 * take the first time...
@@ -1020,7 +1017,8 @@ static void i8042_controller_reset(void)
  * Reset the controller if requested.
  */
 
-	i8042_controller_selftest();
+	if (i8042_reset)
+		i8042_controller_selftest();
 
 /*
  * Restore the original control register setting.
@@ -1094,23 +1092,11 @@ static void i8042_dritek_enable(void)
 #ifdef CONFIG_PM
 
 /*
- * Here we try to restore the original BIOS settings to avoid
- * upsetting it.
- */
-
-static int i8042_pm_reset(struct device *dev)
-{
-	i8042_controller_reset();
-
-	return 0;
-}
-
-/*
  * Here we try to reset everything back to a state we had
  * before suspending.
  */
 
-static int i8042_pm_restore(struct device *dev)
+static int i8042_controller_resume(bool force_reset)
 {
 	int error;
 
@@ -1118,9 +1104,11 @@ static int i8042_pm_restore(struct device *dev)
 	if (error)
 		return error;
 
-	error = i8042_controller_selftest();
-	if (error)
-		return error;
+	if (i8042_reset || force_reset) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
 
 /*
  * Restore original CTR value and disable all ports
@@ -1162,6 +1150,28 @@ static int i8042_pm_restore(struct device *dev)
 	return 0;
 }
 
+/*
+ * Here we try to restore the original BIOS settings to avoid
+ * upsetting it.
+ */
+
+static int i8042_pm_reset(struct device *dev)
+{
+	i8042_controller_reset();
+
+	return 0;
+}
+
+static int i8042_pm_resume(struct device *dev)
+{
+	/*
+	 * On resume from S2R we always try to reset the controller
+	 * to bring it in a sane state. (In case of S2D we expect
+	 * BIOS to reset the controller for us.)
+	 */
+	return i8042_controller_resume(true);
+}
+
 static int i8042_pm_thaw(struct device *dev)
 {
 	i8042_interrupt(0, NULL);
@@ -1169,9 +1179,14 @@ static int i8042_pm_thaw(struct device *dev)
 	return 0;
 }
 
+static int i8042_pm_restore(struct device *dev)
+{
+	return i8042_controller_resume(false);
+}
+
 static const struct dev_pm_ops i8042_pm_ops = {
 	.suspend	= i8042_pm_reset,
-	.resume		= i8042_pm_restore,
+	.resume		= i8042_pm_resume,
 	.thaw		= i8042_pm_thaw,
 	.poweroff	= i8042_pm_reset,
 	.restore	= i8042_pm_restore,
@@ -1389,9 +1404,11 @@ static int __init i8042_probe(struct platform_device *dev)
 
 	i8042_platform_device = dev;
 
-	error = i8042_controller_selftest();
-	if (error)
-		return error;
+	if (i8042_reset) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
 
 	error = i8042_controller_init();
 	if (error)
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 2dc0c07c046..42ba3691d90 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -508,7 +508,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	}
 
 	input_dev->name = wacom_wac->name;
-	input_dev->name = wacom_wac->name;
 	input_dev->dev.parent = &intf->dev;
 	input_dev->open = wacom_open;
 	input_dev->close = wacom_close;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 847fd0135bc..ce0b4608dad 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -158,6 +158,39 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int wacom_dtu_irq(struct wacom_wac *wacom)
+{
+	struct wacom_features *features = &wacom->features;
+	char *data = wacom->data;
+	struct input_dev *input = wacom->input;
+	int prox = data[1] & 0x20, pressure;
+
+	dbg("wacom_dtu_irq: received report #%d", data[0]);
+
+	if (prox) {
+		/* Going into proximity select tool */
+		wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		if (wacom->tool[0] == BTN_TOOL_PEN)
+			wacom->id[0] = STYLUS_DEVICE_ID;
+		else
+			wacom->id[0] = ERASER_DEVICE_ID;
+	}
+	input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+	input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
+	input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+	input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
+	pressure = ((data[7] & 0x01) << 8) | data[6];
+	if (pressure < 0)
+		pressure = features->pressure_max + pressure + 1;
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_report_key(input, BTN_TOUCH, data[1] & 0x05);
+	if (!prox) /* out-prox */
+		wacom->id[0] = 0;
+	input_report_key(input, wacom->tool[0], prox);
+	input_report_abs(input, ABS_MISC, wacom->id[0]);
+	return 1;
+}
+
 static int wacom_graphire_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
@@ -284,12 +317,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 			(data[4] << 20) + (data[5] << 12) +
 			(data[6] << 4) + (data[7] >> 4);
 
-		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
+			((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
 
-		switch (wacom->id[idx]) {
+		switch (wacom->id[idx] & 0xfffff) {
 		case 0x812: /* Inking pen */
 		case 0x801: /* Intuos3 Inking pen */
-		case 0x20802: /* Intuos4 Classic Pen */
+		case 0x20802: /* Intuos4 Inking Pen */
 		case 0x012:
 			wacom->tool[idx] = BTN_TOOL_PENCIL;
 			break;
@@ -300,7 +334,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 		case 0x823: /* Intuos3 Grip Pen */
 		case 0x813: /* Intuos3 Classic Pen */
 		case 0x885: /* Intuos3 Marker Pen */
-		case 0x802: /* Intuos4 Grip Pen Eraser */
+		case 0x802: /* Intuos4 General Pen */
 		case 0x804: /* Intuos4 Marker Pen */
 		case 0x40802: /* Intuos4 Classic Pen */
 		case 0x022:
@@ -335,7 +369,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 		case 0x81b: /* Intuos3 Classic Pen Eraser */
 		case 0x91b: /* Intuos3 Airbrush Eraser */
 		case 0x80c: /* Intuos4 Marker Pen Eraser */
-		case 0x80a: /* Intuos4 Grip Pen Eraser */
+		case 0x80a: /* Intuos4 General Pen Eraser */
 		case 0x4080a: /* Intuos4 Classic Pen Eraser */
 		case 0x90a: /* Intuos4 Airbrush Eraser */
 			wacom->tool[idx] = BTN_TOOL_RUBBER;
@@ -356,6 +390,11 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 		return 1;
 	}
 
+	/* older I4 styli don't work with new Cintiqs */
+	if (!((wacom->id[idx] >> 20) & 0x01) &&
+			(features->type == WACOM_21UX2))
+		return 1;
+
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
 		/*
@@ -474,21 +513,43 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else {
-			input_report_key(input, BTN_0, (data[5] & 0x01));
-			input_report_key(input, BTN_1, (data[5] & 0x02));
-			input_report_key(input, BTN_2, (data[5] & 0x04));
-			input_report_key(input, BTN_3, (data[5] & 0x08));
-			input_report_key(input, BTN_4, (data[6] & 0x01));
-			input_report_key(input, BTN_5, (data[6] & 0x02));
-			input_report_key(input, BTN_6, (data[6] & 0x04));
-			input_report_key(input, BTN_7, (data[6] & 0x08));
-			input_report_key(input, BTN_8, (data[5] & 0x10));
-			input_report_key(input, BTN_9, (data[6] & 0x10));
+			if (features->type == WACOM_21UX2) {
+				input_report_key(input, BTN_0, (data[5] & 0x01));
+				input_report_key(input, BTN_1, (data[6] & 0x01));
+				input_report_key(input, BTN_2, (data[6] & 0x02));
+				input_report_key(input, BTN_3, (data[6] & 0x04));
+				input_report_key(input, BTN_4, (data[6] & 0x08));
+				input_report_key(input, BTN_5, (data[6] & 0x10));
+				input_report_key(input, BTN_6, (data[6] & 0x20));
+				input_report_key(input, BTN_7, (data[6] & 0x40));
+				input_report_key(input, BTN_8, (data[6] & 0x80));
+				input_report_key(input, BTN_9, (data[7] & 0x01));
+				input_report_key(input, BTN_A, (data[8] & 0x01));
+				input_report_key(input, BTN_B, (data[8] & 0x02));
+				input_report_key(input, BTN_C, (data[8] & 0x04));
+				input_report_key(input, BTN_X, (data[8] & 0x08));
+				input_report_key(input, BTN_Y, (data[8] & 0x10));
+				input_report_key(input, BTN_Z, (data[8] & 0x20));
+				input_report_key(input, BTN_BASE, (data[8] & 0x40));
+				input_report_key(input, BTN_BASE2, (data[8] & 0x80));
+			} else {
+				input_report_key(input, BTN_0, (data[5] & 0x01));
+				input_report_key(input, BTN_1, (data[5] & 0x02));
+				input_report_key(input, BTN_2, (data[5] & 0x04));
+				input_report_key(input, BTN_3, (data[5] & 0x08));
+				input_report_key(input, BTN_4, (data[6] & 0x01));
+				input_report_key(input, BTN_5, (data[6] & 0x02));
+				input_report_key(input, BTN_6, (data[6] & 0x04));
+				input_report_key(input, BTN_7, (data[6] & 0x08));
+				input_report_key(input, BTN_8, (data[5] & 0x10));
+				input_report_key(input, BTN_9, (data[6] & 0x10));
+			}
 			input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
 			input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
 
-			if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
-				data[2] | (data[3] & 0x1f) | data[4]) {
+			if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
+				data[2] | (data[3] & 0x1f) | data[4] | data[8] |
+				(data[7] & 0x01)) {
 				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
@@ -640,7 +701,7 @@ static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
 	if (!idx)
 		input_report_key(input, BTN_TOUCH, 1);
 	input_event(input, EV_MSC, MSC_SERIAL, finger);
-	input_sync(wacom->input);
+	input_sync(input);
 
 	wacom->last_finger = finger;
 }
@@ -817,6 +878,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_ptu_irq(wacom_wac);
 		break;
 
+	case DTU:
+		sync = wacom_dtu_irq(wacom_wac);
+		break;
+
 	case INTUOS:
 	case INTUOS3S:
 	case INTUOS3:
@@ -826,6 +891,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 	case INTUOS4L:
 	case CINTIQ:
 	case WACOM_BEE:
+	case WACOM_21UX2:
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
@@ -921,6 +987,17 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
 		break;
 
+	case WACOM_21UX2:
+		__set_bit(BTN_A, input_dev->keybit);
+		__set_bit(BTN_B, input_dev->keybit);
+		__set_bit(BTN_C, input_dev->keybit);
+		__set_bit(BTN_X, input_dev->keybit);
+		__set_bit(BTN_Y, input_dev->keybit);
+		__set_bit(BTN_Z, input_dev->keybit);
+		__set_bit(BTN_BASE, input_dev->keybit);
+		__set_bit(BTN_BASE2, input_dev->keybit);
+		/* fall through */
+
 	case WACOM_BEE:
 		__set_bit(BTN_8, input_dev->keybit);
 		__set_bit(BTN_9, input_dev->keybit);
@@ -990,6 +1067,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	case PL:
 	case PTU:
+	case DTU:
 		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 		__set_bit(BTN_STYLUS, input_dev->keybit);
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
@@ -1105,6 +1183,8 @@ static const struct wacom_features wacom_features_0xBA =
 	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L };
 static const struct wacom_features wacom_features_0xBB =
 	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0xBC =
+	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047, 63, INTUOS4 };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ };
 static const struct wacom_features wacom_features_0xC5 =
@@ -1113,6 +1193,12 @@ static const struct wacom_features wacom_features_0xC6 =
 	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
 static const struct wacom_features wacom_features_0xC7 =
 	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+static const struct wacom_features wacom_features_0xCE =
+	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,  0, DTU };
+static const struct wacom_features wacom_features_0xF0 =
+	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,  0, DTU };
+static const struct wacom_features wacom_features_0xCC =
+	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047, 63, WACOM_21UX2 };
 static const struct wacom_features wacom_features_0x90 =
 	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0x93 =
@@ -1185,10 +1271,14 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xB9) },
 	{ USB_DEVICE_WACOM(0xBA) },
 	{ USB_DEVICE_WACOM(0xBB) },
+	{ USB_DEVICE_WACOM(0xBC) },
 	{ USB_DEVICE_WACOM(0x3F) },
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
 	{ USB_DEVICE_WACOM(0xC7) },
+	{ USB_DEVICE_WACOM(0xCE) },
+	{ USB_DEVICE_WACOM(0xF0) },
+	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
 	{ USB_DEVICE_WACOM(0x93) },
 	{ USB_DEVICE_WACOM(0x9A) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 063f1af3204..99e1a54cd30 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -43,6 +43,7 @@ enum {
 	WACOM_G4,
 	PTU,
 	PL,
+	DTU,
 	INTUOS,
 	INTUOS3S,
 	INTUOS3,
@@ -50,6 +51,7 @@ enum {
 	INTUOS4S,
 	INTUOS4,
 	INTUOS4L,
+	WACOM_21UX2,
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6703c6b9800..61f35184f76 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -55,37 +55,36 @@ config TOUCHSCREEN_AD7877
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7877.
 
-config TOUCHSCREEN_AD7879_I2C
-	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
-	depends on I2C
-	select TOUCHSCREEN_AD7879
+config TOUCHSCREEN_AD7879
+	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
 	help
-	  Say Y here if you have a touchscreen interface using the
-	  AD7879-1/AD7889-1 controller, and your board-specific
-	  initialization code includes that in its table of I2C devices.
+	  Say Y here if you want to support a touchscreen interface using
+	  the AD7879-1/AD7889-1 controller.
 
-	  If unsure, say N (but it's safe to say "Y").
+	  You should select a bus connection too.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879.
 
+config TOUCHSCREEN_AD7879_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_AD7879 && I2C
+	help
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7879-i2c.
+
 config TOUCHSCREEN_AD7879_SPI
-	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
-	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
-	select TOUCHSCREEN_AD7879
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
 	help
-	  Say Y here if you have a touchscreen interface using the
-	  AD7879/AD7889 controller, and your board-specific initialization
-	  code includes that in its table of SPI devices.
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
 
 	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ad7879.
-
-config TOUCHSCREEN_AD7879
-	tristate
-	default n
+	  module will be called ad7879-spi.
 
 config TOUCHSCREEN_BITSY
 	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
@@ -99,6 +98,20 @@ config TOUCHSCREEN_BITSY
 	  To compile this driver as a module, choose M here: the
 	  module will be called h3600_ts_input.
 
+config TOUCHSCREEN_CY8CTMG110
+	tristate "cy8ctmg110 touchscreen"
+	depends on I2C
+	depends on GPIOLIB
+
+	help
+	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
+	  an AAVA device.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cy8ctmg110_ts.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
@@ -156,7 +169,7 @@ config TOUCHSCREEN_FUJITSU
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
 	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
-	select S3C24XX_ADC
+	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
 
@@ -292,6 +305,18 @@ config TOUCHSCREEN_PENMOUNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.
 
+config TOUCHSCREEN_QT602240
+	tristate "QT602240 I2C Touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qt602240_ts.
+
 config TOUCHSCREEN_MIGOR
 	tristate "Renesas MIGO-R touchscreen"
 	depends on SH_MIGOR && I2C
@@ -540,9 +565,9 @@ config TOUCHSCREEN_USB_ZYTRONIC
 	bool "Zytronic controller" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
-config TOUCHSCREEN_USB_ETT_TC5UH
+config TOUCHSCREEN_USB_ETT_TC45USB
 	default y
-	bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
+	bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_NEXIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 497964a7a21..bd6f30b4ff7 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -9,9 +9,13 @@ wm97xx-ts-y := wm97xx-core.o
 obj-$(CONFIG_TOUCHSCREEN_88PM860X)	+= 88pm860x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
@@ -30,6 +34,7 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
@@ -38,7 +43,6 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
-obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 0d2d7e54b46..5f0221cffef 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -679,6 +679,13 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+		dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+		return err;
+	}
+
 	ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!ts || !input_dev) {
diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
new file mode 100644
index 00000000000..d82a38ee9a3
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -0,0 +1,143 @@
+/*
+ * AD7879-1/AD7889-1 touchscreen (I2C bus)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "ad7879.h"
+
+#define AD7879_DEVID		0x79	/* AD7879-1/AD7889-1 */
+
+#ifdef CONFIG_PM
+static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_suspend(ts);
+
+	return 0;
+}
+
+static int ad7879_i2c_resume(struct i2c_client *client)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_resume(ts);
+
+	return 0;
+}
+#else
+# define ad7879_i2c_suspend NULL
+# define ad7879_i2c_resume  NULL
+#endif
+
+/* All registers are word-sized.
+ * AD7879 uses a high-byte first convention.
+ */
+static int ad7879_i2c_read(struct device *dev, u8 reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int ad7879_i2c_multi_read(struct device *dev,
+				 u8 first_reg, u8 count, u16 *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 idx;
+
+	i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf);
+
+	for (idx = 0; idx < count; ++idx)
+		buf[idx] = swab16(buf[idx]);
+
+	return 0;
+}
+
+static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+static const struct ad7879_bus_ops ad7879_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.read		= ad7879_i2c_read,
+	.multi_read	= ad7879_i2c_multi_read,
+	.write		= ad7879_i2c_write,
+};
+
+static int __devinit ad7879_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct ad7879 *ts;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+		return -EIO;
+	}
+
+	ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq,
+			  &ad7879_i2c_bus_ops);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int __devexit ad7879_i2c_remove(struct i2c_client *client)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad7879_id[] = {
+	{ "ad7879", 0 },
+	{ "ad7889", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad7879_id);
+
+static struct i2c_driver ad7879_i2c_driver = {
+	.driver = {
+		.name	= "ad7879",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad7879_i2c_probe,
+	.remove		= __devexit_p(ad7879_i2c_remove),
+	.suspend	= ad7879_i2c_suspend,
+	.resume		= ad7879_i2c_resume,
+	.id_table	= ad7879_id,
+};
+
+static int __init ad7879_i2c_init(void)
+{
+	return i2c_add_driver(&ad7879_i2c_driver);
+}
+module_init(ad7879_i2c_init);
+
+static void __exit ad7879_i2c_exit(void)
+{
+	i2c_del_driver(&ad7879_i2c_driver);
+}
+module_exit(ad7879_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad7879");
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
new file mode 100644
index 00000000000..59c6e68c432
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -0,0 +1,198 @@
+/*
+ * AD7879/AD7889 touchscreen (SPI bus)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/spi/spi.h>
+
+#include "ad7879.h"
+
+#define AD7879_DEVID		0x7A	/* AD7879/AD7889 */
+
+#define MAX_SPI_FREQ_HZ      5000000
+#define AD7879_CMD_MAGIC     0xE000
+#define AD7879_CMD_READ      (1 << 10)
+#define AD7879_CMD(reg)      (AD7879_CMD_MAGIC | ((reg) & 0xF))
+#define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
+#define AD7879_READCMD(reg)  (AD7879_CMD(reg) | AD7879_CMD_READ)
+
+#ifdef CONFIG_PM
+static int ad7879_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct ad7879 *ts = spi_get_drvdata(spi);
+
+	ad7879_suspend(ts);
+
+	return 0;
+}
+
+static int ad7879_spi_resume(struct spi_device *spi)
+{
+	struct ad7879 *ts = spi_get_drvdata(spi);
+
+	ad7879_resume(ts);
+
+	return 0;
+}
+#else
+# define ad7879_spi_suspend NULL
+# define ad7879_spi_resume  NULL
+#endif
+
+/*
+ * ad7879_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done in ad7879_collect().
+ */
+
+static int ad7879_spi_xfer(struct spi_device *spi,
+			   u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf)
+{
+	struct spi_message msg;
+	struct spi_transfer *xfers;
+	void *spi_data;
+	u16 *command;
+	u16 *_rx_buf = _rx_buf; /* shut gcc up */
+	u8 idx;
+	int ret;
+
+	xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL);
+	if (!spi_data)
+		return -ENOMEM;
+
+	spi_message_init(&msg);
+
+	command = spi_data;
+	command[0] = cmd;
+	if (count == 1) {
+		/* ad7879_spi_{read,write} gave us buf on stack */
+		command[1] = *tx_buf;
+		tx_buf = &command[1];
+		_rx_buf = rx_buf;
+		rx_buf = &command[2];
+	}
+
+	++xfers;
+	xfers[0].tx_buf = command;
+	xfers[0].len = 2;
+	spi_message_add_tail(&xfers[0], &msg);
+	++xfers;
+
+	for (idx = 0; idx < count; ++idx) {
+		if (rx_buf)
+			xfers[idx].rx_buf = &rx_buf[idx];
+		if (tx_buf)
+			xfers[idx].tx_buf = &tx_buf[idx];
+		xfers[idx].len = 2;
+		spi_message_add_tail(&xfers[idx], &msg);
+	}
+
+	ret = spi_sync(spi, &msg);
+
+	if (count == 1)
+		_rx_buf[0] = command[2];
+
+	kfree(spi_data);
+
+	return ret;
+}
+
+static int ad7879_spi_multi_read(struct device *dev,
+				 u8 first_reg, u8 count, u16 *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf);
+}
+
+static int ad7879_spi_read(struct device *dev, u8 reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u16 ret, dummy;
+
+	return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret;
+}
+
+static int ad7879_spi_write(struct device *dev, u8 reg, u16 val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u16 dummy;
+
+	return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy);
+}
+
+static const struct ad7879_bus_ops ad7879_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.read		= ad7879_spi_read,
+	.multi_read	= ad7879_spi_multi_read,
+	.write		= ad7879_spi_write,
+};
+
+static int __devinit ad7879_spi_probe(struct spi_device *spi)
+{
+	struct ad7879 *ts;
+	int err;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+	        dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+	        return err;
+	}
+
+	ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static int __devexit ad7879_spi_remove(struct spi_device *spi)
+{
+	struct ad7879 *ts = spi_get_drvdata(spi);
+
+	ad7879_remove(ts);
+	spi_set_drvdata(spi, NULL);
+
+	return 0;
+}
+
+static struct spi_driver ad7879_spi_driver = {
+	.driver = {
+		.name	= "ad7879",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad7879_spi_probe,
+	.remove		= __devexit_p(ad7879_spi_remove),
+	.suspend	= ad7879_spi_suspend,
+	.resume		= ad7879_spi_resume,
+};
+
+static int __init ad7879_spi_init(void)
+{
+	return spi_register_driver(&ad7879_spi_driver);
+}
+module_init(ad7879_spi_init);
+
+static void __exit ad7879_spi_exit(void)
+{
+	spi_unregister_driver(&ad7879_spi_driver);
+}
+module_exit(ad7879_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad7879");
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 794d070c690..ba6f0bd1e76 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -1,25 +1,9 @@
 /*
- * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc.
+ * AD7879/AD7889 based touchscreen and GPIO driver
  *
- * Description:	AD7879/AD7889 based touchscreen, and GPIO driver
- *		(I2C/SPI Interface)
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
  *
- * Bugs:        Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  *
  * History:
  * Copyright (c) 2005 David Brownell
@@ -44,12 +28,12 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
-#include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 
 #include <linux/spi/ad7879.h>
+#include "ad7879.h"
 
 #define AD7879_REG_ZEROS		0
 #define AD7879_REG_CTRL1		1
@@ -120,30 +104,19 @@ enum {
 #define	MAX_12BIT			((1<<12)-1)
 #define	TS_PEN_UP_TIMEOUT		msecs_to_jiffies(50)
 
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
-#define AD7879_DEVID		0x7A
-typedef struct spi_device	bus_device;
-#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
-#define AD7879_DEVID		0x79
-typedef struct i2c_client	bus_device;
-#endif
-
 struct ad7879 {
-	bus_device		*bus;
+	const struct ad7879_bus_ops *bops;
+
+	struct device		*dev;
 	struct input_dev	*input;
-	struct work_struct	work;
 	struct timer_list	timer;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip	gc;
-#endif
 	struct mutex		mutex;
-	unsigned		disabled:1;	/* P: mutex */
-
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
-	struct spi_message	msg;
-	struct spi_transfer	xfer[AD7879_NR_SENSE + 1];
-	u16			cmd;
 #endif
+	unsigned int		irq;
+	bool			disabled;	/* P: input->mutex */
+	bool			suspended;	/* P: input->mutex */
 	u16			conversion_data[AD7879_NR_SENSE];
 	char			phys[32];
 	u8			first_conversion_delay;
@@ -158,11 +131,22 @@ struct ad7879 {
 	u16			cmd_crtl3;
 };
 
-static int ad7879_read(bus_device *, u8);
-static int ad7879_write(bus_device *, u8, u16);
-static void ad7879_collect(struct ad7879 *);
+static int ad7879_read(struct ad7879 *ts, u8 reg)
+{
+	return ts->bops->read(ts->dev, reg);
+}
+
+static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf)
+{
+	return ts->bops->multi_read(ts->dev, first_reg, count, buf);
+}
 
-static void ad7879_report(struct ad7879 *ts)
+static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val)
+{
+	return ts->bops->write(ts->dev, reg, val);
+}
+
+static int ad7879_report(struct ad7879 *ts)
 {
 	struct input_dev *input_dev = ts->input;
 	unsigned Rt;
@@ -175,12 +159,14 @@ static void ad7879_report(struct ad7879 *ts)
 
 	/*
 	 * The samples processed here are already preprocessed by the AD7879.
-	 * The preprocessing function consists of a median and an averaging filter.
-	 * The combination of these two techniques provides a robust solution,
-	 * discarding the spurious noise in the signal and keeping only the data of interest.
-	 * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h)
-	 * Other user-programmable conversion controls include variable acquisition time,
-	 * and first conversion delay. Up to 16 averages can be taken per conversion.
+	 * The preprocessing function consists of a median and an averaging
+	 * filter.  The combination of these two techniques provides a robust
+	 * solution, discarding the spurious noise in the signal and keeping
+	 * only the data of interest.  The size of both filters is
+	 * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other
+	 * user-programmable conversion controls include variable acquisition
+	 * time, and first conversion delay. Up to 16 averages can be taken
+	 * per conversion.
 	 */
 
 	if (likely(x && z1)) {
@@ -189,21 +175,17 @@ static void ad7879_report(struct ad7879 *ts)
 		Rt /= z1;
 		Rt = (Rt + 2047) >> 12;
 
+		if (!timer_pending(&ts->timer))
+			input_report_key(input_dev, BTN_TOUCH, 1);
+
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
 		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+		return 0;
 	}
-}
-
-static void ad7879_work(struct work_struct *work)
-{
-	struct ad7879 *ts = container_of(work, struct ad7879, work);
 
-	/* use keventd context to read the result registers */
-	ad7879_collect(ts);
-	ad7879_report(ts);
-	mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+	return -EINVAL;
 }
 
 static void ad7879_ts_event_release(struct ad7879 *ts)
@@ -211,6 +193,7 @@ static void ad7879_ts_event_release(struct ad7879 *ts)
 	struct input_dev *input_dev = ts->input;
 
 	input_report_abs(input_dev, ABS_PRESSURE, 0);
+	input_report_key(input_dev, BTN_TOUCH, 0);
 	input_sync(input_dev);
 }
 
@@ -225,56 +208,98 @@ static irqreturn_t ad7879_irq(int irq, void *handle)
 {
 	struct ad7879 *ts = handle;
 
-	/* The repeated conversion sequencer controlled by TMR kicked off too fast.
-	 * We ignore the last and process the sample sequence currently in the queue.
-	 * It can't be older than 9.4ms
-	 */
+	ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data);
 
-	if (!work_pending(&ts->work))
-		schedule_work(&ts->work);
+	if (!ad7879_report(ts))
+		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
 
 	return IRQ_HANDLED;
 }
 
-static void ad7879_setup(struct ad7879 *ts)
+static void __ad7879_enable(struct ad7879 *ts)
 {
-	ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
-	ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
-	ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
+	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3);
+	ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1);
+
+	enable_irq(ts->irq);
 }
 
-static void ad7879_disable(struct ad7879 *ts)
+static void __ad7879_disable(struct ad7879 *ts)
 {
-	mutex_lock(&ts->mutex);
+	disable_irq(ts->irq);
+
+	if (del_timer_sync(&ts->timer))
+		ad7879_ts_event_release(ts);
+
+	ad7879_write(ts, AD7879_REG_CTRL2, AD7879_PM(AD7879_PM_SHUTDOWN));
+}
 
-	if (!ts->disabled) {
 
-		ts->disabled = 1;
-		disable_irq(ts->bus->irq);
+static int ad7879_open(struct input_dev *input)
+{
+	struct ad7879 *ts = input_get_drvdata(input);
 
-		cancel_work_sync(&ts->work);
+	/* protected by input->mutex */
+	if (!ts->disabled && !ts->suspended)
+		__ad7879_enable(ts);
 
-		if (del_timer_sync(&ts->timer))
-			ad7879_ts_event_release(ts);
+	return 0;
+}
 
-		ad7879_write(ts->bus, AD7879_REG_CTRL2,
-			     AD7879_PM(AD7879_PM_SHUTDOWN));
-	}
+static void ad7879_close(struct input_dev* input)
+{
+	struct ad7879 *ts = input_get_drvdata(input);
 
-	mutex_unlock(&ts->mutex);
+	/* protected by input->mutex */
+	if (!ts->disabled && !ts->suspended)
+		__ad7879_disable(ts);
 }
 
-static void ad7879_enable(struct ad7879 *ts)
+void ad7879_suspend(struct ad7879 *ts)
 {
-	mutex_lock(&ts->mutex);
+	mutex_lock(&ts->input->mutex);
+
+	if (!ts->suspended && !ts->disabled && ts->input->users)
+		__ad7879_disable(ts);
+
+	ts->suspended = true;
 
-	if (ts->disabled) {
-		ad7879_setup(ts);
-		ts->disabled = 0;
-		enable_irq(ts->bus->irq);
+	mutex_unlock(&ts->input->mutex);
+}
+EXPORT_SYMBOL(ad7879_suspend);
+
+void ad7879_resume(struct ad7879 *ts)
+{
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->suspended && !ts->disabled && ts->input->users)
+		__ad7879_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+}
+EXPORT_SYMBOL(ad7879_resume);
+
+static void ad7879_toggle(struct ad7879 *ts, bool disable)
+{
+	mutex_lock(&ts->input->mutex);
+
+	if (!ts->suspended && ts->input->users != 0) {
+
+		if (disable) {
+			if (ts->disabled)
+				__ad7879_enable(ts);
+		} else {
+			if (!ts->disabled)
+				__ad7879_disable(ts);
+		}
 	}
 
-	mutex_unlock(&ts->mutex);
+	ts->disabled = disable;
+
+	mutex_unlock(&ts->input->mutex);
 }
 
 static ssize_t ad7879_disable_show(struct device *dev,
@@ -297,10 +322,7 @@ static ssize_t ad7879_disable_store(struct device *dev,
 	if (error)
 		return error;
 
-	if (val)
-		ad7879_disable(ts);
-	else
-		ad7879_enable(ts);
+	ad7879_toggle(ts, val);
 
 	return count;
 }
@@ -325,7 +347,7 @@ static int ad7879_gpio_direction_input(struct gpio_chip *chip,
 
 	mutex_lock(&ts->mutex);
 	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
-	err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
 	mutex_unlock(&ts->mutex);
 
 	return err;
@@ -345,7 +367,7 @@ static int ad7879_gpio_direction_output(struct gpio_chip *chip,
 	else
 		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
 
-	err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
 	mutex_unlock(&ts->mutex);
 
 	return err;
@@ -357,7 +379,7 @@ static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 	u16 val;
 
 	mutex_lock(&ts->mutex);
-	val = ad7879_read(ts->bus, AD7879_REG_CTRL2);
+	val = ad7879_read(ts, AD7879_REG_CTRL2);
 	mutex_unlock(&ts->mutex);
 
 	return !!(val & AD7879_GPIO_DATA);
@@ -374,16 +396,17 @@ static void ad7879_gpio_set_value(struct gpio_chip *chip,
 	else
 		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
 
-	ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
 	mutex_unlock(&ts->mutex);
 }
 
-static int __devinit ad7879_gpio_add(struct device *dev)
+static int ad7879_gpio_add(struct ad7879 *ts,
+			   const struct ad7879_platform_data *pdata)
 {
-	struct ad7879 *ts = dev_get_drvdata(dev);
-	struct ad7879_platform_data *pdata = dev->platform_data;
 	int ret = 0;
 
+	mutex_init(&ts->mutex);
+
 	if (pdata->gpio_export) {
 		ts->gc.direction_input = ad7879_gpio_direction_input;
 		ts->gc.direction_output = ad7879_gpio_direction_output;
@@ -394,72 +417,75 @@ static int __devinit ad7879_gpio_add(struct device *dev)
 		ts->gc.ngpio = 1;
 		ts->gc.label = "AD7879-GPIO";
 		ts->gc.owner = THIS_MODULE;
-		ts->gc.dev = dev;
+		ts->gc.dev = ts->dev;
 
 		ret = gpiochip_add(&ts->gc);
 		if (ret)
-			dev_err(dev, "failed to register gpio %d\n",
+			dev_err(ts->dev, "failed to register gpio %d\n",
 				ts->gc.base);
 	}
 
 	return ret;
 }
 
-/*
- * We mark ad7879_gpio_remove inline so there is a chance the code
- * gets discarded when not needed. We can't do __devinit/__devexit
- * markup since it is used in both probe and remove methods.
- */
-static inline void ad7879_gpio_remove(struct device *dev)
+static void ad7879_gpio_remove(struct ad7879 *ts)
 {
-	struct ad7879 *ts = dev_get_drvdata(dev);
-	struct ad7879_platform_data *pdata = dev->platform_data;
+	const struct ad7879_platform_data *pdata = ts->dev->platform_data;
 	int ret;
 
 	if (pdata->gpio_export) {
 		ret = gpiochip_remove(&ts->gc);
 		if (ret)
-			dev_err(dev, "failed to remove gpio %d\n",
+			dev_err(ts->dev, "failed to remove gpio %d\n",
 				ts->gc.base);
 	}
 }
 #else
-static inline int ad7879_gpio_add(struct device *dev)
+static inline int ad7879_gpio_add(struct ad7879 *ts,
+				  const struct ad7879_platform_data *pdata)
 {
 	return 0;
 }
 
-static inline void ad7879_gpio_remove(struct device *dev)
+static inline void ad7879_gpio_remove(struct ad7879 *ts)
 {
 }
 #endif
 
-static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
+struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
+			    const struct ad7879_bus_ops *bops)
 {
+	struct ad7879_platform_data *pdata = dev->platform_data;
+	struct ad7879 *ts;
 	struct input_dev *input_dev;
-	struct ad7879_platform_data *pdata = bus->dev.platform_data;
 	int err;
 	u16 revid;
 
-	if (!bus->irq) {
-		dev_err(&bus->dev, "no IRQ?\n");
-		return -ENODEV;
+	if (!irq) {
+		dev_err(dev, "no IRQ?\n");
+		err = -EINVAL;
+		goto err_out;
 	}
 
 	if (!pdata) {
-		dev_err(&bus->dev, "no platform data?\n");
-		return -ENODEV;
+		dev_err(dev, "no platform data?\n");
+		err = -EINVAL;
+		goto err_out;
 	}
 
+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
 
+	ts->bops = bops;
+	ts->dev = dev;
 	ts->input = input_dev;
+	ts->irq = irq;
 
 	setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
-	INIT_WORK(&ts->work, ad7879_work);
-	mutex_init(&ts->mutex);
 
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
 	ts->pressure_max = pdata->pressure_max ? : ~0;
@@ -470,17 +496,26 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
 	ts->median = pdata->median;
 
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
 
 	input_dev->name = "AD7879 Touchscreen";
 	input_dev->phys = ts->phys;
-	input_dev->dev.parent = &bus->dev;
+	input_dev->dev.parent = dev;
+	input_dev->id.bustype = bops->bustype;
+
+	input_dev->open = ad7879_open;
+	input_dev->close = ad7879_close;
+
+	input_set_drvdata(input_dev, ts);
 
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(ABS_X, input_dev->absbit);
 	__set_bit(ABS_Y, input_dev->absbit);
 	__set_bit(ABS_PRESSURE, input_dev->absbit);
 
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
 	input_set_abs_params(input_dev, ABS_X,
 			pdata->x_min ? : 0,
 			pdata->x_max ? : MAX_12BIT,
@@ -492,17 +527,18 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	input_set_abs_params(input_dev, ABS_PRESSURE,
 			pdata->pressure_min, pdata->pressure_max, 0, 0);
 
-	err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET);
-
+	err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
 	if (err < 0) {
-		dev_err(&bus->dev, "Failed to write %s\n", input_dev->name);
+		dev_err(dev, "Failed to write %s\n", input_dev->name);
 		goto err_free_mem;
 	}
 
-	revid = ad7879_read(bus, AD7879_REG_REVID);
-
-	if ((revid & 0xFF) != AD7879_DEVID) {
-		dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name);
+	revid = ad7879_read(ts, AD7879_REG_REVID);
+	input_dev->id.product = (revid & 0xff);
+	input_dev->id.version = revid >> 8;
+	if (input_dev->id.product != devid) {
+		dev_err(dev, "Failed to probe %s (%x vs %x)\n",
+			input_dev->name, devid, revid);
 		err = -ENODEV;
 		goto err_free_mem;
 	}
@@ -524,21 +560,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 			AD7879_ACQ(ts->acquisition_time) |
 			AD7879_TMR(ts->pen_down_acc_interval);
 
-	ad7879_setup(ts);
-
-	err = request_irq(bus->irq, ad7879_irq,
-			  IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
-
+	err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
+				   IRQF_TRIGGER_FALLING,
+				   dev_name(dev), ts);
 	if (err) {
-		dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
+		dev_err(dev, "irq %d busy?\n", ts->irq);
 		goto err_free_mem;
 	}
 
-	err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group);
+	__ad7879_disable(ts);
+
+	err = sysfs_create_group(&dev->kobj, &ad7879_attr_group);
 	if (err)
 		goto err_free_irq;
 
-	err = ad7879_gpio_add(&bus->dev);
+	err = ad7879_gpio_add(ts, pdata);
 	if (err)
 		goto err_remove_attr;
 
@@ -546,324 +582,32 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	if (err)
 		goto err_remove_gpio;
 
-	dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
-		 revid >> 8, bus->irq);
-
-	return 0;
+	return ts;
 
 err_remove_gpio:
-	ad7879_gpio_remove(&bus->dev);
+	ad7879_gpio_remove(ts);
 err_remove_attr:
-	sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
+	sysfs_remove_group(&dev->kobj, &ad7879_attr_group);
 err_free_irq:
-	free_irq(bus->irq, ts);
+	free_irq(ts->irq, ts);
 err_free_mem:
 	input_free_device(input_dev);
-
-	return err;
-}
-
-static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
-{
-	ad7879_gpio_remove(&bus->dev);
-	ad7879_disable(ts);
-	sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
-	free_irq(ts->bus->irq, ts);
-	input_unregister_device(ts->input);
-	dev_dbg(&bus->dev, "unregistered touchscreen\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ad7879_suspend(bus_device *bus, pm_message_t message)
-{
-	struct ad7879 *ts = dev_get_drvdata(&bus->dev);
-
-	ad7879_disable(ts);
-
-	return 0;
-}
-
-static int ad7879_resume(bus_device *bus)
-{
-	struct ad7879 *ts = dev_get_drvdata(&bus->dev);
-
-	ad7879_enable(ts);
-
-	return 0;
-}
-#else
-#define ad7879_suspend NULL
-#define ad7879_resume  NULL
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
-#define MAX_SPI_FREQ_HZ		5000000
-#define AD7879_CMD_MAGIC	0xE000
-#define AD7879_CMD_READ		(1 << 10)
-#define AD7879_WRITECMD(reg)	(AD7879_CMD_MAGIC | (reg & 0xF))
-#define AD7879_READCMD(reg)	(AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF))
-
-struct ser_req {
-	u16			command;
-	u16			data;
-	struct spi_message	msg;
-	struct spi_transfer	xfer[2];
-};
-
-/*
- * ad7879_read/write are only used for initial setup and for sysfs controls.
- * The main traffic is done in ad7879_collect().
- */
-
-static int ad7879_read(struct spi_device *spi, u8 reg)
-{
-	struct ser_req *req;
-	int status, ret;
-
-	req = kzalloc(sizeof *req, GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
-	spi_message_init(&req->msg);
-
-	req->command = (u16) AD7879_READCMD(reg);
-	req->xfer[0].tx_buf = &req->command;
-	req->xfer[0].len = 2;
-
-	req->xfer[1].rx_buf = &req->data;
-	req->xfer[1].len = 2;
-
-	spi_message_add_tail(&req->xfer[0], &req->msg);
-	spi_message_add_tail(&req->xfer[1], &req->msg);
-
-	status = spi_sync(spi, &req->msg);
-	ret = status ? : req->data;
-
-	kfree(req);
-
-	return ret;
-}
-
-static int ad7879_write(struct spi_device *spi, u8 reg, u16 val)
-{
-	struct ser_req *req;
-	int status;
-
-	req = kzalloc(sizeof *req, GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
-	spi_message_init(&req->msg);
-
-	req->command = (u16) AD7879_WRITECMD(reg);
-	req->xfer[0].tx_buf = &req->command;
-	req->xfer[0].len = 2;
-
-	req->data = val;
-	req->xfer[1].tx_buf = &req->data;
-	req->xfer[1].len = 2;
-
-	spi_message_add_tail(&req->xfer[0], &req->msg);
-	spi_message_add_tail(&req->xfer[1], &req->msg);
-
-	status = spi_sync(spi, &req->msg);
-
-	kfree(req);
-
-	return status;
-}
-
-static void ad7879_collect(struct ad7879 *ts)
-{
-	int status = spi_sync(ts->bus, &ts->msg);
-
-	if (status)
-		dev_err(&ts->bus->dev, "spi_sync --> %d\n", status);
-}
-
-static void ad7879_setup_ts_def_msg(struct ad7879 *ts)
-{
-	struct spi_message *m;
-	int i;
-
-	ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS);
-
-	m = &ts->msg;
-	spi_message_init(m);
-	ts->xfer[0].tx_buf = &ts->cmd;
-	ts->xfer[0].len = 2;
-
-	spi_message_add_tail(&ts->xfer[0], m);
-
-	for (i = 0; i < AD7879_NR_SENSE; i++) {
-		ts->xfer[i + 1].rx_buf = &ts->conversion_data[i];
-		ts->xfer[i + 1].len = 2;
-		spi_message_add_tail(&ts->xfer[i + 1], m);
-	}
-}
-
-static int __devinit ad7879_probe(struct spi_device *spi)
-{
-	struct ad7879 *ts;
-	int error;
-
-	/* don't exceed max specified SPI CLK frequency */
-	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
-		dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
-		return -EINVAL;
-	}
-
-	ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
-	if (!ts)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ts);
-	ts->bus = spi;
-
-	ad7879_setup_ts_def_msg(ts);
-
-	error = ad7879_construct(spi, ts);
-	if (error) {
-		dev_set_drvdata(&spi->dev, NULL);
-		kfree(ts);
-	}
-
-	return error;
-}
-
-static int __devexit ad7879_remove(struct spi_device *spi)
-{
-	struct ad7879 *ts = dev_get_drvdata(&spi->dev);
-
-	ad7879_destroy(spi, ts);
-	dev_set_drvdata(&spi->dev, NULL);
 	kfree(ts);
-
-	return 0;
+err_out:
+	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(ad7879_probe);
 
-static struct spi_driver ad7879_driver = {
-	.driver = {
-		.name	= "ad7879",
-		.bus	= &spi_bus_type,
-		.owner	= THIS_MODULE,
-	},
-	.probe		= ad7879_probe,
-	.remove		= __devexit_p(ad7879_remove),
-	.suspend	= ad7879_suspend,
-	.resume		= ad7879_resume,
-};
-
-static int __init ad7879_init(void)
-{
-	return spi_register_driver(&ad7879_driver);
-}
-module_init(ad7879_init);
-
-static void __exit ad7879_exit(void)
-{
-	spi_unregister_driver(&ad7879_driver);
-}
-module_exit(ad7879_exit);
-
-#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
-
-/* All registers are word-sized.
- * AD7879 uses a high-byte first convention.
- */
-static int ad7879_read(struct i2c_client *client, u8 reg)
+void ad7879_remove(struct ad7879 *ts)
 {
-	return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
-static int ad7879_write(struct i2c_client *client, u8 reg, u16 val)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
-static void ad7879_collect(struct ad7879 *ts)
-{
-	int i;
-
-	for (i = 0; i < AD7879_NR_SENSE; i++)
-		ts->conversion_data[i] = ad7879_read(ts->bus,
-						     AD7879_REG_XPLUS + i);
-}
-
-static int __devinit ad7879_probe(struct i2c_client *client,
-					const struct i2c_device_id *id)
-{
-	struct ad7879 *ts;
-	int error;
-
-	if (!i2c_check_functionality(client->adapter,
-					I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
-		return -EIO;
-	}
-
-	ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
-	if (!ts)
-		return -ENOMEM;
-
-	i2c_set_clientdata(client, ts);
-	ts->bus = client;
-
-	error = ad7879_construct(client, ts);
-	if (error) {
-		i2c_set_clientdata(client, NULL);
-		kfree(ts);
-	}
-
-	return error;
-}
-
-static int __devexit ad7879_remove(struct i2c_client *client)
-{
-	struct ad7879 *ts = dev_get_drvdata(&client->dev);
-
-	ad7879_destroy(client, ts);
-	i2c_set_clientdata(client, NULL);
+	ad7879_gpio_remove(ts);
+	sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group);
+	free_irq(ts->irq, ts);
+	input_unregister_device(ts->input);
 	kfree(ts);
-
-	return 0;
-}
-
-static const struct i2c_device_id ad7879_id[] = {
-	{ "ad7879", 0 },
-	{ "ad7889", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ad7879_id);
-
-static struct i2c_driver ad7879_driver = {
-	.driver = {
-		.name	= "ad7879",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= ad7879_probe,
-	.remove		= __devexit_p(ad7879_remove),
-	.suspend	= ad7879_suspend,
-	.resume		= ad7879_resume,
-	.id_table	= ad7879_id,
-};
-
-static int __init ad7879_init(void)
-{
-	return i2c_add_driver(&ad7879_driver);
-}
-module_init(ad7879_init);
-
-static void __exit ad7879_exit(void)
-{
-	i2c_del_driver(&ad7879_driver);
 }
-module_exit(ad7879_exit);
-#endif
+EXPORT_SYMBOL(ad7879_remove);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:ad7879");
diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h
new file mode 100644
index 00000000000..6b45a27236c
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879.h
@@ -0,0 +1,30 @@
+/*
+ * AD7879/AD7889 touchscreen (bus interfaces)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD7879_H_
+#define _AD7879_H_
+
+#include <linux/types.h>
+
+struct ad7879;
+struct device;
+
+struct ad7879_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *dev, u8 reg);
+	int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf);
+	int (*write)(struct device *dev, u8 reg, u16 val);
+};
+
+void ad7879_suspend(struct ad7879 *);
+void ad7879_resume(struct ad7879 *);
+struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq,
+			    const struct ad7879_bus_ops *bops);
+void ad7879_remove(struct ad7879 *);
+
+#endif
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 634f6f6b9b1..16031933a8f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -68,6 +68,8 @@ struct ts_event {
 	u16	y;
 	u16	z1, z2;
 	int	ignore;
+	u8	x_buf[3];
+	u8	y_buf[3];
 };
 
 /*
@@ -79,6 +81,8 @@ struct ads7846_packet {
 	u8			read_x, read_y, read_z1, read_z2, pwrdown;
 	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
+	/* for ads7845 with mpc5121 psc spi we use 3-byte buffers */
+	u8			read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3];
 };
 
 struct ads7846 {
@@ -207,6 +211,14 @@ struct ser_req {
 	struct spi_transfer	xfer[6];
 };
 
+struct ads7845_ser_req {
+	u8			command[3];
+	u8			pwrdown[3];
+	u8			sample[3];
+	struct spi_message	msg;
+	struct spi_transfer	xfer[2];
+};
+
 static void ads7846_enable(struct ads7846 *ts);
 static void ads7846_disable(struct ads7846 *ts);
 
@@ -287,6 +299,41 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	return status;
 }
 
+static int ads7845_read12_ser(struct device *dev, unsigned command)
+{
+	struct spi_device	*spi = to_spi_device(dev);
+	struct ads7846		*ts = dev_get_drvdata(dev);
+	struct ads7845_ser_req	*req = kzalloc(sizeof *req, GFP_KERNEL);
+	int			status;
+
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	req->command[0] = (u8) command;
+	req->xfer[0].tx_buf = req->command;
+	req->xfer[0].rx_buf = req->sample;
+	req->xfer[0].len = 3;
+	spi_message_add_tail(&req->xfer[0], &req->msg);
+
+	ts->irq_disabled = 1;
+	disable_irq(spi->irq);
+	status = spi_sync(spi, &req->msg);
+	ts->irq_disabled = 0;
+	enable_irq(spi->irq);
+
+	if (status == 0) {
+		/* BE12 value, then padding */
+		status = be16_to_cpu(*((u16 *)&req->sample[1]));
+		status = status >> 3;
+		status &= 0x0fff;
+	}
+
+	kfree(req);
+	return status;
+}
+
 #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
 
 #define SHOW(name, var, adjust) static ssize_t \
@@ -540,10 +587,17 @@ static void ads7846_rx(void *ads)
 	/* ads7846_rx_val() did in-place conversion (including byteswap) from
 	 * on-the-wire format as part of debouncing to get stable readings.
 	 */
-	x = packet->tc.x;
-	y = packet->tc.y;
-	z1 = packet->tc.z1;
-	z2 = packet->tc.z2;
+	if (ts->model == 7845) {
+		x = *(u16 *)packet->tc.x_buf;
+		y = *(u16 *)packet->tc.y_buf;
+		z1 = 0;
+		z2 = 0;
+	} else {
+		x = packet->tc.x;
+		y = packet->tc.y;
+		z1 = packet->tc.z1;
+		z2 = packet->tc.z2;
+	}
 
 	/* range filtering */
 	if (x == MAX_12BIT)
@@ -551,6 +605,12 @@ static void ads7846_rx(void *ads)
 
 	if (ts->model == 7843) {
 		Rt = ts->pressure_max / 2;
+	} else if (ts->model == 7845) {
+		if (get_pendown_state(ts))
+			Rt = ts->pressure_max / 2;
+		else
+			Rt = 0;
+		dev_vdbg(&ts->spi->dev, "x/y: %d/%d, PD %d\n", x, y, Rt);
 	} else if (likely(x && z1)) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
@@ -671,10 +731,14 @@ static void ads7846_rx_val(void *ads)
 	m = &ts->msg[ts->msg_idx];
 	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
 
-	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
-	 * built from two 8 bit values written msb-first.
-	 */
-	val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
+	if (ts->model == 7845) {
+		val = be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3;
+	} else {
+		/* adjust:  on-wire is a must-ignore bit, a BE12 value, then
+		 * padding; built from two 8 bit values written msb-first.
+		 */
+		val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
+	}
 
 	action = ts->filter(ts->filter_data, ts->msg_idx, &val);
 	switch (action) {
@@ -878,14 +942,15 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
 
 static int __devinit ads7846_probe(struct spi_device *spi)
 {
-	struct ads7846			*ts;
-	struct ads7846_packet		*packet;
-	struct input_dev		*input_dev;
-	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
-	struct spi_message		*m;
-	struct spi_transfer		*x;
-	int				vref;
-	int				err;
+	struct ads7846 *ts;
+	struct ads7846_packet *packet;
+	struct input_dev *input_dev;
+	const struct ads7846_platform_data *pdata = spi->dev.platform_data;
+	struct spi_message *m;
+	struct spi_transfer *x;
+	unsigned long irq_flags;
+	int vref;
+	int err;
 
 	if (!spi->irq) {
 		dev_dbg(&spi->dev, "no IRQ?\n");
@@ -1008,16 +1073,26 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	spi_message_init(m);
 
-	/* y- still on; turn on only y+ (and ADC) */
-	packet->read_y = READ_Y(vref);
-	x->tx_buf = &packet->read_y;
-	x->len = 1;
-	spi_message_add_tail(x, m);
+	if (ts->model == 7845) {
+		packet->read_y_cmd[0] = READ_Y(vref);
+		packet->read_y_cmd[1] = 0;
+		packet->read_y_cmd[2] = 0;
+		x->tx_buf = &packet->read_y_cmd[0];
+		x->rx_buf = &packet->tc.y_buf[0];
+		x->len = 3;
+		spi_message_add_tail(x, m);
+	} else {
+		/* y- still on; turn on only y+ (and ADC) */
+		packet->read_y = READ_Y(vref);
+		x->tx_buf = &packet->read_y;
+		x->len = 1;
+		spi_message_add_tail(x, m);
 
-	x++;
-	x->rx_buf = &packet->tc.y;
-	x->len = 2;
-	spi_message_add_tail(x, m);
+		x++;
+		x->rx_buf = &packet->tc.y;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
 
 	/* the first sample after switching drivers can be low quality;
 	 * optionally discard it, using a second one after the signals
@@ -1043,17 +1118,28 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	m++;
 	spi_message_init(m);
 
-	/* turn y- off, x+ on, then leave in lowpower */
-	x++;
-	packet->read_x = READ_X(vref);
-	x->tx_buf = &packet->read_x;
-	x->len = 1;
-	spi_message_add_tail(x, m);
+	if (ts->model == 7845) {
+		x++;
+		packet->read_x_cmd[0] = READ_X(vref);
+		packet->read_x_cmd[1] = 0;
+		packet->read_x_cmd[2] = 0;
+		x->tx_buf = &packet->read_x_cmd[0];
+		x->rx_buf = &packet->tc.x_buf[0];
+		x->len = 3;
+		spi_message_add_tail(x, m);
+	} else {
+		/* turn y- off, x+ on, then leave in lowpower */
+		x++;
+		packet->read_x = READ_X(vref);
+		x->tx_buf = &packet->read_x;
+		x->len = 1;
+		spi_message_add_tail(x, m);
 
-	x++;
-	x->rx_buf = &packet->tc.x;
-	x->len = 2;
-	spi_message_add_tail(x, m);
+		x++;
+		x->rx_buf = &packet->tc.x;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
 
 	/* ... maybe discard first sample ... */
 	if (pdata->settle_delay_usecs) {
@@ -1144,15 +1230,25 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	m++;
 	spi_message_init(m);
 
-	x++;
-	packet->pwrdown = PWRDOWN;
-	x->tx_buf = &packet->pwrdown;
-	x->len = 1;
-	spi_message_add_tail(x, m);
+	if (ts->model == 7845) {
+		x++;
+		packet->pwrdown_cmd[0] = PWRDOWN;
+		packet->pwrdown_cmd[1] = 0;
+		packet->pwrdown_cmd[2] = 0;
+		x->tx_buf = &packet->pwrdown_cmd[0];
+		x->len = 3;
+	} else {
+		x++;
+		packet->pwrdown = PWRDOWN;
+		x->tx_buf = &packet->pwrdown;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->dummy;
+		x->len = 2;
+	}
 
-	x++;
-	x->rx_buf = &packet->dummy;
-	x->len = 2;
 	CS_CHANGE(*x);
 	spi_message_add_tail(x, m);
 
@@ -1164,7 +1260,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->reg = regulator_get(&spi->dev, "vcc");
 	if (IS_ERR(ts->reg)) {
 		err = PTR_ERR(ts->reg);
-		dev_err(&spi->dev, "unable to get regulator: %ld\n", err);
+		dev_err(&spi->dev, "unable to get regulator: %d\n", err);
 		goto err_free_gpio;
 	}
 
@@ -1174,17 +1270,22 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		goto err_put_regulator;
 	}
 
-	if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
-			spi->dev.driver->name, ts)) {
+	irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
+
+	err = request_irq(spi->irq, ads7846_irq, irq_flags,
+			  spi->dev.driver->name, ts);
+
+	if (err && !pdata->irq_flags) {
 		dev_info(&spi->dev,
 			"trying pin change workaround on irq %d\n", spi->irq);
 		err = request_irq(spi->irq, ads7846_irq,
 				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 				  spi->dev.driver->name, ts);
-		if (err) {
-			dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-			goto err_disable_regulator;
-		}
+	}
+
+	if (err) {
+		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+		goto err_disable_regulator;
 	}
 
 	err = ads784x_hwmon_register(spi, ts);
@@ -1196,8 +1297,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	/* take a first sample, leaving nPENIRQ active and vREF off; avoid
 	 * the touchscreen, in case it's not connected.
 	 */
-	(void) ads7846_read12_ser(&spi->dev,
-			  READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+	if (ts->model == 7845)
+		ads7845_read12_ser(&spi->dev, PWRDOWN);
+	else
+		(void) ads7846_read12_ser(&spi->dev,
+				READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
 
 	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
 	if (err)
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
new file mode 100644
index 00000000000..4eb7df0b7f8
--- /dev/null
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -0,0 +1,363 @@
+/*
+ * Driver for cypress touch screen controller
+ *
+ * Copyright (c) 2009 Aava Mobile
+ *
+ * Some cleanups by Alan Cox <alan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/input/cy8ctmg110_pdata.h>
+
+#define CY8CTMG110_DRIVER_NAME      "cy8ctmg110"
+
+/* Touch coordinates */
+#define CY8CTMG110_X_MIN		0
+#define CY8CTMG110_Y_MIN		0
+#define CY8CTMG110_X_MAX		759
+#define CY8CTMG110_Y_MAX		465
+
+
+/* cy8ctmg110 register definitions */
+#define CY8CTMG110_TOUCH_WAKEUP_TIME	0
+#define CY8CTMG110_TOUCH_SLEEP_TIME	2
+#define CY8CTMG110_TOUCH_X1		3
+#define CY8CTMG110_TOUCH_Y1		5
+#define CY8CTMG110_TOUCH_X2		7
+#define CY8CTMG110_TOUCH_Y2		9
+#define CY8CTMG110_FINGERS		11
+#define CY8CTMG110_GESTURE		12
+#define CY8CTMG110_REG_MAX		13
+
+
+/*
+ * The touch driver structure.
+ */
+struct cy8ctmg110 {
+	struct input_dev *input;
+	char phys[32];
+	struct i2c_client *client;
+	int reset_pin;
+	int irq_pin;
+};
+
+/*
+ * cy8ctmg110_power is the routine that is called when touch hardware
+ * will powered off or on.
+ */
+static void cy8ctmg110_power(struct cy8ctmg110 *ts, bool poweron)
+{
+	if (ts->reset_pin)
+		gpio_direction_output(ts->reset_pin, 1 - poweron);
+}
+
+static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
+		unsigned char len, unsigned char *value)
+{
+	struct i2c_client *client = tsc->client;
+	unsigned int ret;
+	unsigned char i2c_data[6];
+
+	BUG_ON(len > 5);
+
+	i2c_data[0] = reg;
+	memcpy(i2c_data + 1, value, len);
+
+	ret = i2c_master_send(client, i2c_data, len + 1);
+	if (ret != 1) {
+		dev_err(&client->dev, "i2c write data cmd failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc,
+		unsigned char *data, unsigned char len, unsigned char cmd)
+{
+	struct i2c_client *client = tsc->client;
+	unsigned int ret;
+	struct i2c_msg msg[2] = {
+		/* first write slave position to i2c devices */
+		{ client->addr, 0, 1, &cmd },
+		/* Second read data from position */
+		{ client->addr, I2C_M_RD, len, data }
+	};
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
+{
+	struct input_dev *input = tsc->input;
+	unsigned char reg_p[CY8CTMG110_REG_MAX];
+	int x, y;
+
+	memset(reg_p, 0, CY8CTMG110_REG_MAX);
+
+	/* Reading coordinates */
+	if (cy8ctmg110_read_regs(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0)
+		return -EIO;
+
+	y = reg_p[2] << 8 | reg_p[3];
+	x = reg_p[0] << 8 | reg_p[1];
+
+	/* Number of touch */
+	if (reg_p[8] == 0) {
+		input_report_key(input, BTN_TOUCH, 0);
+	} else  {
+		input_report_key(input, BTN_TOUCH, 1);
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	}
+
+	input_sync(input);
+
+	return 0;
+}
+
+static int cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts, bool sleep)
+{
+	unsigned char reg_p[3];
+
+	if (sleep) {
+		reg_p[0] = 0x00;
+		reg_p[1] = 0xff;
+		reg_p[2] = 5;
+	} else {
+		reg_p[0] = 0x10;
+		reg_p[1] = 0xff;
+		reg_p[2] = 0;
+	}
+
+	return cy8ctmg110_write_regs(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p);
+}
+
+static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id)
+{
+	struct cy8ctmg110 *tsc = dev_id;
+
+	cy8ctmg110_touch_pos(tsc);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit cy8ctmg110_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	const struct cy8ctmg110_pdata *pdata = client->dev.platform_data;
+	struct cy8ctmg110 *ts;
+	struct input_dev *input_dev;
+	int err;
+
+	/* No pdata no way forward */
+	if (pdata == NULL) {
+		dev_err(&client->dev, "no pdata\n");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EIO;
+
+	ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	ts->input = input_dev;
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X,
+			CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0);
+
+	if (ts->reset_pin) {
+		err = gpio_request(ts->reset_pin, NULL);
+		if (err) {
+			dev_err(&client->dev,
+				"Unable to request GPIO pin %d.\n",
+				ts->reset_pin);
+			goto err_free_mem;
+		}
+	}
+
+	cy8ctmg110_power(ts, true);
+	cy8ctmg110_set_sleepmode(ts, false);
+
+	err = gpio_request(ts->irq_pin, "touch_irq_key");
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to request GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_shutoff_device;
+	}
+
+	err = gpio_direction_input(ts->irq_pin);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to configure input direction for GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_free_irq_gpio;
+	}
+
+	client->irq = gpio_to_irq(ts->irq_pin);
+	if (client->irq < 0) {
+		err = client->irq;
+		dev_err(&client->dev,
+			"Unable to get irq number for GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_free_irq_gpio;
+	}
+
+	err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
+				   IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"irq %d busy? error %d\n", client->irq, err);
+		goto err_free_irq_gpio;
+	}
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, ts);
+err_free_irq_gpio:
+	gpio_free(ts->irq_pin);
+err_shutoff_device:
+	cy8ctmg110_set_sleepmode(ts, true);
+	cy8ctmg110_power(ts, false);
+	if (ts->reset_pin)
+		gpio_free(ts->reset_pin);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	else {
+		cy8ctmg110_set_sleepmode(ts, true);
+		cy8ctmg110_power(ts, false);
+	}
+	return 0;
+}
+
+static int cy8ctmg110_resume(struct i2c_client *client)
+{
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	else {
+		cy8ctmg110_power(ts, true);
+		cy8ctmg110_set_sleepmode(ts, false);
+	}
+	return 0;
+}
+#endif
+
+static int __devexit cy8ctmg110_remove(struct i2c_client *client)
+{
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	cy8ctmg110_set_sleepmode(ts, true);
+	cy8ctmg110_power(ts, false);
+
+	free_irq(client->irq, ts);
+	input_unregister_device(ts->input);
+	gpio_free(ts->irq_pin);
+	if (ts->reset_pin)
+		gpio_free(ts->reset_pin);
+	kfree(ts);
+
+	return 0;
+}
+
+static struct i2c_device_id cy8ctmg110_idtable[] = {
+	{ CY8CTMG110_DRIVER_NAME, 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable);
+
+static struct i2c_driver cy8ctmg110_driver = {
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= CY8CTMG110_DRIVER_NAME,
+	},
+	.id_table	= cy8ctmg110_idtable,
+	.probe		= cy8ctmg110_probe,
+	.remove		= __devexit_p(cy8ctmg110_remove),
+#ifdef CONFIG_PM
+	.suspend	= cy8ctmg110_suspend,
+	.resume		= cy8ctmg110_resume,
+#endif
+};
+
+static int __init cy8ctmg110_init(void)
+{
+	return i2c_add_driver(&cy8ctmg110_driver);
+}
+
+static void __exit cy8ctmg110_exit(void)
+{
+	i2c_del_driver(&cy8ctmg110_driver);
+}
+
+module_init(cy8ctmg110_init);
+module_exit(cy8ctmg110_exit);
+
+MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>");
+MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 75f8b73010f..7a3a916f84a 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -238,7 +238,6 @@ err2:
 	input = NULL; /* so we dont try to free it below */
 err1:
 	input_free_device(input);
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 err0:
 	return err;
@@ -256,7 +255,6 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 	enable_irq(priv->irq);
 
 	input_unregister_device(priv->input);
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 
 	return 0;
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index ce8ab0269f6..6ee9940aaf5 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/i2c/mcs5000_ts.h>
+#include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/irq.h>
@@ -105,7 +105,7 @@ enum mcs5000_ts_read_offset {
 struct mcs5000_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	const struct mcs5000_ts_platform_data *platform_data;
+	const struct mcs_platform_data *platform_data;
 };
 
 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
@@ -164,7 +164,7 @@ static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
 
 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
 {
-	const struct mcs5000_ts_platform_data *platform_data =
+	const struct mcs_platform_data *platform_data =
 		data->platform_data;
 	struct i2c_client *client = data->client;
 
@@ -256,7 +256,6 @@ static int __devexit mcs5000_ts_remove(struct i2c_client *client)
 	free_irq(client->irq, data);
 	input_unregister_device(data->input_dev);
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c
new file mode 100644
index 00000000000..66b26ad3032
--- /dev/null
+++ b/drivers/input/touchscreen/qt602240_ts.c
@@ -0,0 +1,1401 @@
+/*
+ * AT42QT602240/ATMXT224 Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/i2c/qt602240_ts.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* Version */
+#define QT602240_VER_20			20
+#define QT602240_VER_21			21
+#define QT602240_VER_22			22
+
+/* Slave addresses */
+#define QT602240_APP_LOW		0x4a
+#define QT602240_APP_HIGH		0x4b
+#define QT602240_BOOT_LOW		0x24
+#define QT602240_BOOT_HIGH		0x25
+
+/* Firmware */
+#define QT602240_FW_NAME		"qt602240.fw"
+
+/* Registers */
+#define QT602240_FAMILY_ID		0x00
+#define QT602240_VARIANT_ID		0x01
+#define QT602240_VERSION		0x02
+#define QT602240_BUILD			0x03
+#define QT602240_MATRIX_X_SIZE		0x04
+#define QT602240_MATRIX_Y_SIZE		0x05
+#define QT602240_OBJECT_NUM		0x06
+#define QT602240_OBJECT_START		0x07
+
+#define QT602240_OBJECT_SIZE		6
+
+/* Object types */
+#define QT602240_DEBUG_DIAGNOSTIC	37
+#define QT602240_GEN_MESSAGE		5
+#define QT602240_GEN_COMMAND		6
+#define QT602240_GEN_POWER		7
+#define QT602240_GEN_ACQUIRE		8
+#define QT602240_TOUCH_MULTI		9
+#define QT602240_TOUCH_KEYARRAY		15
+#define QT602240_TOUCH_PROXIMITY	23
+#define QT602240_PROCI_GRIPFACE		20
+#define QT602240_PROCG_NOISE		22
+#define QT602240_PROCI_ONETOUCH		24
+#define QT602240_PROCI_TWOTOUCH		27
+#define QT602240_SPT_COMMSCONFIG	18	/* firmware ver 21 over */
+#define QT602240_SPT_GPIOPWM		19
+#define QT602240_SPT_SELFTEST		25
+#define QT602240_SPT_CTECONFIG		28
+#define QT602240_SPT_USERDATA		38	/* firmware ver 21 over */
+
+/* QT602240_GEN_COMMAND field */
+#define QT602240_COMMAND_RESET		0
+#define QT602240_COMMAND_BACKUPNV	1
+#define QT602240_COMMAND_CALIBRATE	2
+#define QT602240_COMMAND_REPORTALL	3
+#define QT602240_COMMAND_DIAGNOSTIC	5
+
+/* QT602240_GEN_POWER field */
+#define QT602240_POWER_IDLEACQINT	0
+#define QT602240_POWER_ACTVACQINT	1
+#define QT602240_POWER_ACTV2IDLETO	2
+
+/* QT602240_GEN_ACQUIRE field */
+#define QT602240_ACQUIRE_CHRGTIME	0
+#define QT602240_ACQUIRE_TCHDRIFT	2
+#define QT602240_ACQUIRE_DRIFTST	3
+#define QT602240_ACQUIRE_TCHAUTOCAL	4
+#define QT602240_ACQUIRE_SYNC		5
+#define QT602240_ACQUIRE_ATCHCALST	6
+#define QT602240_ACQUIRE_ATCHCALSTHR	7
+
+/* QT602240_TOUCH_MULTI field */
+#define QT602240_TOUCH_CTRL		0
+#define QT602240_TOUCH_XORIGIN		1
+#define QT602240_TOUCH_YORIGIN		2
+#define QT602240_TOUCH_XSIZE		3
+#define QT602240_TOUCH_YSIZE		4
+#define QT602240_TOUCH_BLEN		6
+#define QT602240_TOUCH_TCHTHR		7
+#define QT602240_TOUCH_TCHDI		8
+#define QT602240_TOUCH_ORIENT		9
+#define QT602240_TOUCH_MOVHYSTI		11
+#define QT602240_TOUCH_MOVHYSTN		12
+#define QT602240_TOUCH_NUMTOUCH		14
+#define QT602240_TOUCH_MRGHYST		15
+#define QT602240_TOUCH_MRGTHR		16
+#define QT602240_TOUCH_AMPHYST		17
+#define QT602240_TOUCH_XRANGE_LSB	18
+#define QT602240_TOUCH_XRANGE_MSB	19
+#define QT602240_TOUCH_YRANGE_LSB	20
+#define QT602240_TOUCH_YRANGE_MSB	21
+#define QT602240_TOUCH_XLOCLIP		22
+#define QT602240_TOUCH_XHICLIP		23
+#define QT602240_TOUCH_YLOCLIP		24
+#define QT602240_TOUCH_YHICLIP		25
+#define QT602240_TOUCH_XEDGECTRL	26
+#define QT602240_TOUCH_XEDGEDIST	27
+#define QT602240_TOUCH_YEDGECTRL	28
+#define QT602240_TOUCH_YEDGEDIST	29
+#define QT602240_TOUCH_JUMPLIMIT	30	/* firmware ver 22 over */
+
+/* QT602240_PROCI_GRIPFACE field */
+#define QT602240_GRIPFACE_CTRL		0
+#define QT602240_GRIPFACE_XLOGRIP	1
+#define QT602240_GRIPFACE_XHIGRIP	2
+#define QT602240_GRIPFACE_YLOGRIP	3
+#define QT602240_GRIPFACE_YHIGRIP	4
+#define QT602240_GRIPFACE_MAXTCHS	5
+#define QT602240_GRIPFACE_SZTHR1	7
+#define QT602240_GRIPFACE_SZTHR2	8
+#define QT602240_GRIPFACE_SHPTHR1	9
+#define QT602240_GRIPFACE_SHPTHR2	10
+#define QT602240_GRIPFACE_SUPEXTTO	11
+
+/* QT602240_PROCI_NOISE field */
+#define QT602240_NOISE_CTRL		0
+#define QT602240_NOISE_OUTFLEN		1
+#define QT602240_NOISE_GCAFUL_LSB	3
+#define QT602240_NOISE_GCAFUL_MSB	4
+#define QT602240_NOISE_GCAFLL_LSB	5
+#define QT602240_NOISE_GCAFLL_MSB	6
+#define QT602240_NOISE_ACTVGCAFVALID	7
+#define QT602240_NOISE_NOISETHR		8
+#define QT602240_NOISE_FREQHOPSCALE	10
+#define QT602240_NOISE_FREQ0		11
+#define QT602240_NOISE_FREQ1		12
+#define QT602240_NOISE_FREQ2		13
+#define QT602240_NOISE_FREQ3		14
+#define QT602240_NOISE_FREQ4		15
+#define QT602240_NOISE_IDLEGCAFVALID	16
+
+/* QT602240_SPT_COMMSCONFIG */
+#define QT602240_COMMS_CTRL		0
+#define QT602240_COMMS_CMD		1
+
+/* QT602240_SPT_CTECONFIG field */
+#define QT602240_CTE_CTRL		0
+#define QT602240_CTE_CMD		1
+#define QT602240_CTE_MODE		2
+#define QT602240_CTE_IDLEGCAFDEPTH	3
+#define QT602240_CTE_ACTVGCAFDEPTH	4
+#define QT602240_CTE_VOLTAGE		5	/* firmware ver 21 over */
+
+#define QT602240_VOLTAGE_DEFAULT	2700000
+#define QT602240_VOLTAGE_STEP		10000
+
+/* Define for QT602240_GEN_COMMAND */
+#define QT602240_BOOT_VALUE		0xa5
+#define QT602240_BACKUP_VALUE		0x55
+#define QT602240_BACKUP_TIME		25	/* msec */
+#define QT602240_RESET_TIME		65	/* msec */
+
+#define QT602240_FWRESET_TIME		175	/* msec */
+
+/* Command to unlock bootloader */
+#define QT602240_UNLOCK_CMD_MSB		0xaa
+#define QT602240_UNLOCK_CMD_LSB		0xdc
+
+/* Bootloader mode status */
+#define QT602240_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
+#define QT602240_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
+#define QT602240_FRAME_CRC_CHECK	0x02
+#define QT602240_FRAME_CRC_FAIL		0x03
+#define QT602240_FRAME_CRC_PASS		0x04
+#define QT602240_APP_CRC_FAIL		0x40	/* valid 7 8 bit only */
+#define QT602240_BOOT_STATUS_MASK	0x3f
+
+/* Touch status */
+#define QT602240_SUPPRESS		(1 << 1)
+#define QT602240_AMP			(1 << 2)
+#define QT602240_VECTOR			(1 << 3)
+#define QT602240_MOVE			(1 << 4)
+#define QT602240_RELEASE		(1 << 5)
+#define QT602240_PRESS			(1 << 6)
+#define QT602240_DETECT			(1 << 7)
+
+/* Touchscreen absolute values */
+#define QT602240_MAX_XC			0x3ff
+#define QT602240_MAX_YC			0x3ff
+#define QT602240_MAX_AREA		0xff
+
+#define QT602240_MAX_FINGER		10
+
+/* Initial register values recommended from chip vendor */
+static const u8 init_vals_ver_20[] = {
+	/* QT602240_GEN_COMMAND(6) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_GEN_POWER(7) */
+	0x20, 0xff, 0x32,
+	/* QT602240_GEN_ACQUIRE(8) */
+	0x08, 0x05, 0x05, 0x00, 0x00, 0x00, 0x05, 0x14,
+	/* QT602240_TOUCH_MULTI(9) */
+	0x00, 0x00, 0x00, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x02, 0x00,
+	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x64,
+	/* QT602240_TOUCH_KEYARRAY(15) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00,
+	/* QT602240_SPT_GPIOPWM(19) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00,
+	/* QT602240_PROCI_GRIPFACE(20) */
+	0x00, 0x64, 0x64, 0x64, 0x64, 0x00, 0x00, 0x1e, 0x14, 0x04,
+	0x1e, 0x00,
+	/* QT602240_PROCG_NOISE(22) */
+	0x05, 0x00, 0x00, 0x19, 0x00, 0xe7, 0xff, 0x04, 0x32, 0x00,
+	0x01, 0x0a, 0x0f, 0x14, 0x00, 0x00, 0xe8,
+	/* QT602240_TOUCH_PROXIMITY(23) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00,
+	/* QT602240_PROCI_ONETOUCH(24) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_SELFTEST(25) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_TWOTOUCH(27) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_CTECONFIG(28) */
+	0x00, 0x00, 0x00, 0x04, 0x08,
+};
+
+static const u8 init_vals_ver_21[] = {
+	/* QT602240_GEN_COMMAND(6) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_GEN_POWER(7) */
+	0x20, 0xff, 0x32,
+	/* QT602240_GEN_ACQUIRE(8) */
+	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+	/* QT602240_TOUCH_MULTI(9) */
+	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_TOUCH_KEYARRAY(15) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00,
+	/* QT602240_SPT_GPIOPWM(19) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_GRIPFACE(20) */
+	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+	0x0f, 0x0a,
+	/* QT602240_PROCG_NOISE(22) */
+	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+	/* QT602240_TOUCH_PROXIMITY(23) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00,
+	/* QT602240_PROCI_ONETOUCH(24) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_SELFTEST(25) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_TWOTOUCH(27) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_CTECONFIG(28) */
+	0x00, 0x00, 0x00, 0x08, 0x10, 0x00,
+};
+
+static const u8 init_vals_ver_22[] = {
+	/* QT602240_GEN_COMMAND(6) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_GEN_POWER(7) */
+	0x20, 0xff, 0x32,
+	/* QT602240_GEN_ACQUIRE(8) */
+	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+	/* QT602240_TOUCH_MULTI(9) */
+	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00,
+	/* QT602240_TOUCH_KEYARRAY(15) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00,
+	/* QT602240_SPT_GPIOPWM(19) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_GRIPFACE(20) */
+	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+	0x0f, 0x0a,
+	/* QT602240_PROCG_NOISE(22) */
+	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+	/* QT602240_TOUCH_PROXIMITY(23) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_ONETOUCH(24) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_SELFTEST(25) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	/* QT602240_PROCI_TWOTOUCH(27) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* QT602240_SPT_CTECONFIG(28) */
+	0x00, 0x00, 0x00, 0x08, 0x10, 0x00,
+};
+
+struct qt602240_info {
+	u8 family_id;
+	u8 variant_id;
+	u8 version;
+	u8 build;
+	u8 matrix_xsize;
+	u8 matrix_ysize;
+	u8 object_num;
+};
+
+struct qt602240_object {
+	u8 type;
+	u16 start_address;
+	u8 size;
+	u8 instances;
+	u8 num_report_ids;
+
+	/* to map object and message */
+	u8 max_reportid;
+};
+
+struct qt602240_message {
+	u8 reportid;
+	u8 message[7];
+	u8 checksum;
+};
+
+struct qt602240_finger {
+	int status;
+	int x;
+	int y;
+	int area;
+};
+
+/* Each client has this additional data */
+struct qt602240_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct qt602240_platform_data *pdata;
+	struct qt602240_object *object_table;
+	struct qt602240_info info;
+	struct qt602240_finger finger[QT602240_MAX_FINGER];
+	unsigned int irq;
+};
+
+static bool qt602240_object_readable(unsigned int type)
+{
+	switch (type) {
+	case QT602240_GEN_MESSAGE:
+	case QT602240_GEN_COMMAND:
+	case QT602240_GEN_POWER:
+	case QT602240_GEN_ACQUIRE:
+	case QT602240_TOUCH_MULTI:
+	case QT602240_TOUCH_KEYARRAY:
+	case QT602240_TOUCH_PROXIMITY:
+	case QT602240_PROCI_GRIPFACE:
+	case QT602240_PROCG_NOISE:
+	case QT602240_PROCI_ONETOUCH:
+	case QT602240_PROCI_TWOTOUCH:
+	case QT602240_SPT_COMMSCONFIG:
+	case QT602240_SPT_GPIOPWM:
+	case QT602240_SPT_SELFTEST:
+	case QT602240_SPT_CTECONFIG:
+	case QT602240_SPT_USERDATA:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool qt602240_object_writable(unsigned int type)
+{
+	switch (type) {
+	case QT602240_GEN_COMMAND:
+	case QT602240_GEN_POWER:
+	case QT602240_GEN_ACQUIRE:
+	case QT602240_TOUCH_MULTI:
+	case QT602240_TOUCH_KEYARRAY:
+	case QT602240_TOUCH_PROXIMITY:
+	case QT602240_PROCI_GRIPFACE:
+	case QT602240_PROCG_NOISE:
+	case QT602240_PROCI_ONETOUCH:
+	case QT602240_PROCI_TWOTOUCH:
+	case QT602240_SPT_GPIOPWM:
+	case QT602240_SPT_SELFTEST:
+	case QT602240_SPT_CTECONFIG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void qt602240_dump_message(struct device *dev,
+				  struct qt602240_message *message)
+{
+	dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
+	dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
+	dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
+	dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
+	dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
+	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
+	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
+	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
+	dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
+}
+
+static int qt602240_check_bootloader(struct i2c_client *client,
+				     unsigned int state)
+{
+	u8 val;
+
+recheck:
+	if (i2c_master_recv(client, &val, 1) != 1) {
+		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
+		return -EIO;
+	}
+
+	switch (state) {
+	case QT602240_WAITING_BOOTLOAD_CMD:
+	case QT602240_WAITING_FRAME_DATA:
+		val &= ~QT602240_BOOT_STATUS_MASK;
+		break;
+	case QT602240_FRAME_CRC_PASS:
+		if (val == QT602240_FRAME_CRC_CHECK)
+			goto recheck;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val != state) {
+		dev_err(&client->dev, "Unvalid bootloader mode state\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qt602240_unlock_bootloader(struct i2c_client *client)
+{
+	u8 buf[2];
+
+	buf[0] = QT602240_UNLOCK_CMD_LSB;
+	buf[1] = QT602240_UNLOCK_CMD_MSB;
+
+	if (i2c_master_send(client, buf, 2) != 2) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int qt602240_fw_write(struct i2c_client *client,
+			     const u8 *data, unsigned int frame_size)
+{
+	if (i2c_master_send(client, data, frame_size) != frame_size) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int __qt602240_read_reg(struct i2c_client *client,
+			       u16 reg, u16 len, void *val)
+{
+	struct i2c_msg xfer[2];
+	u8 buf[2];
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 2;
+	xfer[0].buf = buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	if (i2c_transfer(client->adapter, xfer, 2) != 2) {
+		dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int qt602240_read_reg(struct i2c_client *client, u16 reg, u8 *val)
+{
+	return __qt602240_read_reg(client, reg, 1, val);
+}
+
+static int qt602240_write_reg(struct i2c_client *client, u16 reg, u8 val)
+{
+	u8 buf[3];
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	buf[2] = val;
+
+	if (i2c_master_send(client, buf, 3) != 3) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int qt602240_read_object_table(struct i2c_client *client,
+				      u16 reg, u8 *object_buf)
+{
+	return __qt602240_read_reg(client, reg, QT602240_OBJECT_SIZE,
+				   object_buf);
+}
+
+static struct qt602240_object *
+qt602240_get_object(struct qt602240_data *data, u8 type)
+{
+	struct qt602240_object *object;
+	int i;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+		if (object->type == type)
+			return object;
+	}
+
+	dev_err(&data->client->dev, "Invalid object type\n");
+	return NULL;
+}
+
+static int qt602240_read_message(struct qt602240_data *data,
+				 struct qt602240_message *message)
+{
+	struct qt602240_object *object;
+	u16 reg;
+
+	object = qt602240_get_object(data, QT602240_GEN_MESSAGE);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return __qt602240_read_reg(data->client, reg,
+			sizeof(struct qt602240_message), message);
+}
+
+static int qt602240_read_object(struct qt602240_data *data,
+				u8 type, u8 offset, u8 *val)
+{
+	struct qt602240_object *object;
+	u16 reg;
+
+	object = qt602240_get_object(data, type);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return __qt602240_read_reg(data->client, reg + offset, 1, val);
+}
+
+static int qt602240_write_object(struct qt602240_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct qt602240_object *object;
+	u16 reg;
+
+	object = qt602240_get_object(data, type);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return qt602240_write_reg(data->client, reg + offset, val);
+}
+
+static void qt602240_input_report(struct qt602240_data *data, int single_id)
+{
+	struct qt602240_finger *finger = data->finger;
+	struct input_dev *input_dev = data->input_dev;
+	int status = finger[single_id].status;
+	int finger_num = 0;
+	int id;
+
+	for (id = 0; id < QT602240_MAX_FINGER; id++) {
+		if (!finger[id].status)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+				finger[id].status != QT602240_RELEASE ?
+				finger[id].area : 0);
+		input_report_abs(input_dev, ABS_MT_POSITION_X,
+				finger[id].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y,
+				finger[id].y);
+		input_mt_sync(input_dev);
+
+		if (finger[id].status == QT602240_RELEASE)
+			finger[id].status = 0;
+		else
+			finger_num++;
+	}
+
+	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
+
+	if (status != QT602240_RELEASE) {
+		input_report_abs(input_dev, ABS_X, finger[single_id].x);
+		input_report_abs(input_dev, ABS_Y, finger[single_id].y);
+	}
+
+	input_sync(input_dev);
+}
+
+static void qt602240_input_touchevent(struct qt602240_data *data,
+				      struct qt602240_message *message, int id)
+{
+	struct qt602240_finger *finger = data->finger;
+	struct device *dev = &data->client->dev;
+	u8 status = message->message[0];
+	int x;
+	int y;
+	int area;
+
+	/* Check the touch is present on the screen */
+	if (!(status & QT602240_DETECT)) {
+		if (status & QT602240_RELEASE) {
+			dev_dbg(dev, "[%d] released\n", id);
+
+			finger[id].status = QT602240_RELEASE;
+			qt602240_input_report(data, id);
+		}
+		return;
+	}
+
+	/* Check only AMP detection */
+	if (!(status & (QT602240_PRESS | QT602240_MOVE)))
+		return;
+
+	x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6);
+	y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2);
+	area = message->message[4];
+
+	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
+		status & QT602240_MOVE ? "moved" : "pressed",
+		x, y, area);
+
+	finger[id].status = status & QT602240_MOVE ?
+				QT602240_MOVE : QT602240_PRESS;
+	finger[id].x = x;
+	finger[id].y = y;
+	finger[id].area = area;
+
+	qt602240_input_report(data, id);
+}
+
+static irqreturn_t qt602240_interrupt(int irq, void *dev_id)
+{
+	struct qt602240_data *data = dev_id;
+	struct qt602240_message message;
+	struct qt602240_object *object;
+	struct device *dev = &data->client->dev;
+	int id;
+	u8 reportid;
+	u8 max_reportid;
+	u8 min_reportid;
+
+	do {
+		if (qt602240_read_message(data, &message)) {
+			dev_err(dev, "Failed to read message\n");
+			goto end;
+		}
+
+		reportid = message.reportid;
+
+		/* whether reportid is thing of QT602240_TOUCH_MULTI */
+		object = qt602240_get_object(data, QT602240_TOUCH_MULTI);
+		if (!object)
+			goto end;
+
+		max_reportid = object->max_reportid;
+		min_reportid = max_reportid - object->num_report_ids + 1;
+		id = reportid - min_reportid;
+
+		if (reportid >= min_reportid && reportid <= max_reportid)
+			qt602240_input_touchevent(data, &message, id);
+		else
+			qt602240_dump_message(dev, &message);
+	} while (reportid != 0xff);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static int qt602240_check_reg_init(struct qt602240_data *data)
+{
+	struct qt602240_object *object;
+	struct device *dev = &data->client->dev;
+	int index = 0;
+	int i, j;
+	u8 version = data->info.version;
+	u8 *init_vals;
+
+	switch (version) {
+	case QT602240_VER_20:
+		init_vals = (u8 *)init_vals_ver_20;
+		break;
+	case QT602240_VER_21:
+		init_vals = (u8 *)init_vals_ver_21;
+		break;
+	case QT602240_VER_22:
+		init_vals = (u8 *)init_vals_ver_22;
+		break;
+	default:
+		dev_err(dev, "Firmware version %d doesn't support\n", version);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		if (!qt602240_object_writable(object->type))
+			continue;
+
+		for (j = 0; j < object->size + 1; j++)
+			qt602240_write_object(data, object->type, j,
+					init_vals[index + j]);
+
+		index += object->size + 1;
+	}
+
+	return 0;
+}
+
+static int qt602240_check_matrix_size(struct qt602240_data *data)
+{
+	const struct qt602240_platform_data *pdata = data->pdata;
+	struct device *dev = &data->client->dev;
+	int mode = -1;
+	int error;
+	u8 val;
+
+	dev_dbg(dev, "Number of X lines: %d\n", pdata->x_line);
+	dev_dbg(dev, "Number of Y lines: %d\n", pdata->y_line);
+
+	switch (pdata->x_line) {
+	case 0 ... 15:
+		if (pdata->y_line <= 14)
+			mode = 0;
+		break;
+	case 16:
+		if (pdata->y_line <= 12)
+			mode = 1;
+		if (pdata->y_line == 13 || pdata->y_line == 14)
+			mode = 0;
+		break;
+	case 17:
+		if (pdata->y_line <= 11)
+			mode = 2;
+		if (pdata->y_line == 12 || pdata->y_line == 13)
+			mode = 1;
+		break;
+	case 18:
+		if (pdata->y_line <= 10)
+			mode = 3;
+		if (pdata->y_line == 11 || pdata->y_line == 12)
+			mode = 2;
+		break;
+	case 19:
+		if (pdata->y_line <= 9)
+			mode = 4;
+		if (pdata->y_line == 10 || pdata->y_line == 11)
+			mode = 3;
+		break;
+	case 20:
+		mode = 4;
+	}
+
+	if (mode < 0) {
+		dev_err(dev, "Invalid X/Y lines\n");
+		return -EINVAL;
+	}
+
+	error = qt602240_read_object(data, QT602240_SPT_CTECONFIG,
+				QT602240_CTE_MODE, &val);
+	if (error)
+		return error;
+
+	if (mode == val)
+		return 0;
+
+	/* Change the CTE configuration */
+	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
+			QT602240_CTE_CTRL, 1);
+	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
+			QT602240_CTE_MODE, mode);
+	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
+			QT602240_CTE_CTRL, 0);
+
+	return 0;
+}
+
+static int qt602240_make_highchg(struct qt602240_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int count = 10;
+	int error;
+	u8 val;
+
+	/* Read dummy message to make high CHG pin */
+	do {
+		error = qt602240_read_object(data, QT602240_GEN_MESSAGE, 0, &val);
+		if (error)
+			return error;
+	} while ((val != 0xff) && --count);
+
+	if (!count) {
+		dev_err(dev, "CHG pin isn't cleared\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void qt602240_handle_pdata(struct qt602240_data *data)
+{
+	const struct qt602240_platform_data *pdata = data->pdata;
+	u8 voltage;
+
+	/* Set touchscreen lines */
+	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_XSIZE,
+			pdata->x_line);
+	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_YSIZE,
+			pdata->y_line);
+
+	/* Set touchscreen orient */
+	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_ORIENT,
+			pdata->orient);
+
+	/* Set touchscreen burst length */
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_BLEN, pdata->blen);
+
+	/* Set touchscreen threshold */
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_TCHTHR, pdata->threshold);
+
+	/* Set touchscreen resolution */
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
+	qt602240_write_object(data, QT602240_TOUCH_MULTI,
+			QT602240_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
+
+	/* Set touchscreen voltage */
+	if (data->info.version >= QT602240_VER_21 && pdata->voltage) {
+		if (pdata->voltage < QT602240_VOLTAGE_DEFAULT) {
+			voltage = (QT602240_VOLTAGE_DEFAULT - pdata->voltage) /
+				QT602240_VOLTAGE_STEP;
+			voltage = 0xff - voltage + 1;
+		} else
+			voltage = (pdata->voltage - QT602240_VOLTAGE_DEFAULT) /
+				QT602240_VOLTAGE_STEP;
+
+		qt602240_write_object(data, QT602240_SPT_CTECONFIG,
+				QT602240_CTE_VOLTAGE, voltage);
+	}
+}
+
+static int qt602240_get_info(struct qt602240_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct qt602240_info *info = &data->info;
+	int error;
+	u8 val;
+
+	error = qt602240_read_reg(client, QT602240_FAMILY_ID, &val);
+	if (error)
+		return error;
+	info->family_id = val;
+
+	error = qt602240_read_reg(client, QT602240_VARIANT_ID, &val);
+	if (error)
+		return error;
+	info->variant_id = val;
+
+	error = qt602240_read_reg(client, QT602240_VERSION, &val);
+	if (error)
+		return error;
+	info->version = val;
+
+	error = qt602240_read_reg(client, QT602240_BUILD, &val);
+	if (error)
+		return error;
+	info->build = val;
+
+	error = qt602240_read_reg(client, QT602240_OBJECT_NUM, &val);
+	if (error)
+		return error;
+	info->object_num = val;
+
+	return 0;
+}
+
+static int qt602240_get_object_table(struct qt602240_data *data)
+{
+	int error;
+	int i;
+	u16 reg;
+	u8 reportid = 0;
+	u8 buf[QT602240_OBJECT_SIZE];
+
+	for (i = 0; i < data->info.object_num; i++) {
+		struct qt602240_object *object = data->object_table + i;
+
+		reg = QT602240_OBJECT_START + QT602240_OBJECT_SIZE * i;
+		error = qt602240_read_object_table(data->client, reg, buf);
+		if (error)
+			return error;
+
+		object->type = buf[0];
+		object->start_address = (buf[2] << 8) | buf[1];
+		object->size = buf[3];
+		object->instances = buf[4];
+		object->num_report_ids = buf[5];
+
+		if (object->num_report_ids) {
+			reportid += object->num_report_ids *
+					(object->instances + 1);
+			object->max_reportid = reportid;
+		}
+	}
+
+	return 0;
+}
+
+static int qt602240_initialize(struct qt602240_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct qt602240_info *info = &data->info;
+	int error;
+	u8 val;
+
+	error = qt602240_get_info(data);
+	if (error)
+		return error;
+
+	data->object_table = kcalloc(info->object_num,
+				     sizeof(struct qt602240_data),
+				     GFP_KERNEL);
+	if (!data->object_table) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	/* Get object table information */
+	error = qt602240_get_object_table(data);
+	if (error)
+		return error;
+
+	/* Check register init values */
+	error = qt602240_check_reg_init(data);
+	if (error)
+		return error;
+
+	/* Check X/Y matrix size */
+	error = qt602240_check_matrix_size(data);
+	if (error)
+		return error;
+
+	error = qt602240_make_highchg(data);
+	if (error)
+		return error;
+
+	qt602240_handle_pdata(data);
+
+	/* Backup to memory */
+	qt602240_write_object(data, QT602240_GEN_COMMAND,
+			QT602240_COMMAND_BACKUPNV,
+			QT602240_BACKUP_VALUE);
+	msleep(QT602240_BACKUP_TIME);
+
+	/* Soft reset */
+	qt602240_write_object(data, QT602240_GEN_COMMAND,
+			QT602240_COMMAND_RESET, 1);
+	msleep(QT602240_RESET_TIME);
+
+	/* Update matrix size at info struct */
+	error = qt602240_read_reg(client, QT602240_MATRIX_X_SIZE, &val);
+	if (error)
+		return error;
+	info->matrix_xsize = val;
+
+	error = qt602240_read_reg(client, QT602240_MATRIX_Y_SIZE, &val);
+	if (error)
+		return error;
+	info->matrix_ysize = val;
+
+	dev_info(&client->dev,
+			"Family ID: %d Variant ID: %d Version: %d Build: %d\n",
+			info->family_id, info->variant_id, info->version,
+			info->build);
+
+	dev_info(&client->dev,
+			"Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
+			info->matrix_xsize, info->matrix_ysize,
+			info->object_num);
+
+	return 0;
+}
+
+static ssize_t qt602240_object_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct qt602240_data *data = dev_get_drvdata(dev);
+	struct qt602240_object *object;
+	int count = 0;
+	int i, j;
+	int error;
+	u8 val;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		count += sprintf(buf + count,
+				"Object Table Element %d(Type %d)\n",
+				i + 1, object->type);
+
+		if (!qt602240_object_readable(object->type)) {
+			count += sprintf(buf + count, "\n");
+			continue;
+		}
+
+		for (j = 0; j < object->size + 1; j++) {
+			error = qt602240_read_object(data,
+						object->type, j, &val);
+			if (error)
+				return error;
+
+			count += sprintf(buf + count,
+					"  Byte %d: 0x%x (%d)\n", j, val, val);
+		}
+
+		count += sprintf(buf + count, "\n");
+	}
+
+	return count;
+}
+
+static int qt602240_load_fw(struct device *dev, const char *fn)
+{
+	struct qt602240_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	const struct firmware *fw = NULL;
+	unsigned int frame_size;
+	unsigned int pos = 0;
+	int ret;
+
+	ret = request_firmware(&fw, fn, dev);
+	if (ret) {
+		dev_err(dev, "Unable to open firmware %s\n", fn);
+		return ret;
+	}
+
+	/* Change to the bootloader mode */
+	qt602240_write_object(data, QT602240_GEN_COMMAND,
+			QT602240_COMMAND_RESET, QT602240_BOOT_VALUE);
+	msleep(QT602240_RESET_TIME);
+
+	/* Change to slave address of bootloader */
+	if (client->addr == QT602240_APP_LOW)
+		client->addr = QT602240_BOOT_LOW;
+	else
+		client->addr = QT602240_BOOT_HIGH;
+
+	ret = qt602240_check_bootloader(client, QT602240_WAITING_BOOTLOAD_CMD);
+	if (ret)
+		goto out;
+
+	/* Unlock bootloader */
+	qt602240_unlock_bootloader(client);
+
+	while (pos < fw->size) {
+		ret = qt602240_check_bootloader(client,
+						QT602240_WAITING_FRAME_DATA);
+		if (ret)
+			goto out;
+
+		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
+
+		/* We should add 2 at frame size as the the firmware data is not
+		 * included the CRC bytes.
+		 */
+		frame_size += 2;
+
+		/* Write one frame to device */
+		qt602240_fw_write(client, fw->data + pos, frame_size);
+
+		ret = qt602240_check_bootloader(client,
+						QT602240_FRAME_CRC_PASS);
+		if (ret)
+			goto out;
+
+		pos += frame_size;
+
+		dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
+	}
+
+out:
+	release_firmware(fw);
+
+	/* Change to slave address of application */
+	if (client->addr == QT602240_BOOT_LOW)
+		client->addr = QT602240_APP_LOW;
+	else
+		client->addr = QT602240_APP_HIGH;
+
+	return ret;
+}
+
+static ssize_t qt602240_update_fw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct qt602240_data *data = dev_get_drvdata(dev);
+	unsigned int version;
+	int error;
+
+	if (sscanf(buf, "%u", &version) != 1) {
+		dev_err(dev, "Invalid values\n");
+		return -EINVAL;
+	}
+
+	if (data->info.version < QT602240_VER_21 || version < QT602240_VER_21) {
+		dev_err(dev, "FW update supported starting with version 21\n");
+		return -EINVAL;
+	}
+
+	disable_irq(data->irq);
+
+	error = qt602240_load_fw(dev, QT602240_FW_NAME);
+	if (error) {
+		dev_err(dev, "The firmware update failed(%d)\n", error);
+		count = error;
+	} else {
+		dev_dbg(dev, "The firmware update succeeded\n");
+
+		/* Wait for reset */
+		msleep(QT602240_FWRESET_TIME);
+
+		kfree(data->object_table);
+		data->object_table = NULL;
+
+		qt602240_initialize(data);
+	}
+
+	enable_irq(data->irq);
+
+	return count;
+}
+
+static DEVICE_ATTR(object, 0444, qt602240_object_show, NULL);
+static DEVICE_ATTR(update_fw, 0664, NULL, qt602240_update_fw_store);
+
+static struct attribute *qt602240_attrs[] = {
+	&dev_attr_object.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group qt602240_attr_group = {
+	.attrs = qt602240_attrs,
+};
+
+static void qt602240_start(struct qt602240_data *data)
+{
+	/* Touch enable */
+	qt602240_write_object(data,
+			QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0x83);
+}
+
+static void qt602240_stop(struct qt602240_data *data)
+{
+	/* Touch disable */
+	qt602240_write_object(data,
+			QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0);
+}
+
+static int qt602240_input_open(struct input_dev *dev)
+{
+	struct qt602240_data *data = input_get_drvdata(dev);
+
+	qt602240_start(data);
+
+	return 0;
+}
+
+static void qt602240_input_close(struct input_dev *dev)
+{
+	struct qt602240_data *data = input_get_drvdata(dev);
+
+	qt602240_stop(data);
+}
+
+static int __devinit qt602240_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct qt602240_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!client->dev.platform_data)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(struct qt602240_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	input_dev->name = "AT42QT602240/ATMXT224 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->open = qt602240_input_open;
+	input_dev->close = qt602240_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X,
+			     0, QT602240_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			     0, QT602240_MAX_YC, 0, 0);
+
+	/* For multi touch */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, QT602240_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, QT602240_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, QT602240_MAX_YC, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->pdata = client->dev.platform_data;
+	data->irq = client->irq;
+
+	i2c_set_clientdata(client, data);
+
+	error = qt602240_initialize(data);
+	if (error)
+		goto err_free_object;
+
+	error = request_threaded_irq(client->irq, NULL, qt602240_interrupt,
+			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_object;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	error = sysfs_create_group(&client->dev.kobj, &qt602240_attr_group);
+	if (error)
+		goto err_unregister_device;
+
+	return 0;
+
+err_unregister_device:
+	input_unregister_device(input_dev);
+	input_dev = NULL;
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_object:
+	kfree(data->object_table);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit qt602240_remove(struct i2c_client *client)
+{
+	struct qt602240_data *data = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &qt602240_attr_group);
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data->object_table);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct qt602240_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		qt602240_stop(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int qt602240_resume(struct i2c_client *client)
+{
+	struct qt602240_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	/* Soft reset */
+	qt602240_write_object(data, QT602240_GEN_COMMAND,
+			QT602240_COMMAND_RESET, 1);
+
+	msleep(QT602240_RESET_TIME);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		qt602240_start(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+#else
+#define qt602240_suspend	NULL
+#define qt602240_resume		NULL
+#endif
+
+static const struct i2c_device_id qt602240_id[] = {
+	{ "qt602240_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, qt602240_id);
+
+static struct i2c_driver qt602240_driver = {
+	.driver = {
+		.name	= "qt602240_ts",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= qt602240_probe,
+	.remove		= __devexit_p(qt602240_remove),
+	.suspend	= qt602240_suspend,
+	.resume		= qt602240_resume,
+	.id_table	= qt602240_id,
+};
+
+static int __init qt602240_init(void)
+{
+	return i2c_add_driver(&qt602240_driver);
+}
+
+static void __exit qt602240_exit(void)
+{
+	i2c_del_driver(&qt602240_driver);
+}
+
+module_init(qt602240_init);
+module_exit(qt602240_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("AT42QT602240/ATMXT224 Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index ac5d0f9b0cb..6085d12fd56 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -173,7 +173,7 @@ static irqreturn_t stylus_irq(int irq, void *dev_id)
 	if (down)
 		s3c_adc_start(ts.client, 0, 1 << ts.shift);
 	else
-		dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+		dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count);
 
 	if (ts.features & FEAT_PEN_IRQ) {
 		/* Clear pen down/up interrupt */
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index 5de80a1a730..a644d18c04d 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -221,7 +221,7 @@ done:
 
 	if (poll) {
 		schd = queue_delayed_work(tsc->wq, &tsc->work,
-					  tsc->poll_period * HZ / 1000);
+					  msecs_to_jiffies(tsc->poll_period));
 		if (schd)
 			tsc->polling = 1;
 		else {
@@ -326,7 +326,7 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 		goto err2;
 
 	schd = queue_delayed_work(tsc->wq, &tsc->work,
-				  tsc->poll_period * HZ / 1000);
+				  msecs_to_jiffies(tsc->poll_period));
 
 	if (schd)
 		tsc->polling = 1;
@@ -339,10 +339,8 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 	return 0;
 
 err2:
-	cancel_delayed_work(&tsc->work);
-	flush_workqueue(tsc->wq);
+	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
-	tsc->wq = 0;
 	input_free_device(input_dev);
 err1:
 	kfree(tsc);
@@ -357,13 +355,8 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
 	struct tps6507x_ts *tsc = tps6507x_dev->ts;
 	struct input_dev *input_dev = tsc->input_dev;
 
-	if (!tsc)
-		return 0;
-
-	cancel_delayed_work(&tsc->work);
-	flush_workqueue(tsc->wq);
+	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
-	tsc->wq = 0;
 
 	input_free_device(input_dev);
 
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 769b479fcaa..be23780e8a3 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -347,8 +347,6 @@ static int __devexit tsc2007_remove(struct i2c_client *client)
 	struct tsc2007	*ts = i2c_get_clientdata(client);
 	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 
-	i2c_set_clientdata(client, NULL);
-
 	tsc2007_free_irq(ts);
 
 	if (pdata->exit_platform_hw)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 567d57215c2..f45f80f6d33 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -95,6 +95,7 @@ struct usbtouch_device_info {
 	int  (*get_pkt_len) (unsigned char *pkt, int len);
 
 	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
+	int  (*alloc)       (struct usbtouch_usb *usbtouch);
 	int  (*init)        (struct usbtouch_usb *usbtouch);
 	void (*exit)	    (struct usbtouch_usb *usbtouch);
 };
@@ -135,7 +136,7 @@ enum {
 	DEVTYPE_JASTEC,
 	DEVTYPE_E2I,
 	DEVTYPE_ZYTRONIC,
-	DEVTYPE_TC5UH,
+	DEVTYPE_TC45USB,
 	DEVTYPE_NEXIO,
 };
 
@@ -222,8 +223,11 @@ static const struct usb_device_id usbtouch_devices[] = {
 	{USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
 #endif
 
-#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
-	{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+	/* TC5UH */
+	{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB},
+	/* TC4UM */
+	{USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
@@ -507,7 +511,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	int ret = -ENOMEM;
 	unsigned char *buf;
 
-	buf = kmalloc(2, GFP_KERNEL);
+	buf = kmalloc(2, GFP_NOIO);
 	if (!buf)
 		goto err_nobuf;
 	/* reset */
@@ -574,10 +578,10 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #endif
 
 /*****************************************************************************
- * ET&T TC5UH part
+ * ET&T TC5UH/TC4UM part
  */
-#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
-static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
 	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
@@ -732,11 +736,43 @@ static void nexio_ack_complete(struct urb *urb)
 {
 }
 
+static int nexio_alloc(struct usbtouch_usb *usbtouch)
+{
+	struct nexio_priv *priv;
+	int ret = -ENOMEM;
+
+	usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+	if (!usbtouch->priv)
+		goto out_buf;
+
+	priv = usbtouch->priv;
+
+	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+				GFP_KERNEL);
+	if (!priv->ack_buf)
+		goto err_priv;
+
+	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+	if (!priv->ack) {
+		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+		goto err_ack_buf;
+	}
+
+	return 0;
+
+err_ack_buf:
+	kfree(priv->ack_buf);
+err_priv:
+	kfree(priv);
+out_buf:
+	return ret;
+}
+
 static int nexio_init(struct usbtouch_usb *usbtouch)
 {
 	struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
 	struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
-	struct nexio_priv *priv;
+	struct nexio_priv *priv = usbtouch->priv;
 	int ret = -ENOMEM;
 	int actual_len, i;
 	unsigned char *buf;
@@ -755,7 +791,7 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 	if (!input_ep || !output_ep)
 		return -ENXIO;
 
-	buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+	buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO);
 	if (!buf)
 		goto out_buf;
 
@@ -787,11 +823,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 		switch (buf[0]) {
 		case 0x83:	/* firmware version */
 			if (!firmware_ver)
-				firmware_ver = kstrdup(&buf[2], GFP_KERNEL);
+				firmware_ver = kstrdup(&buf[2], GFP_NOIO);
 			break;
 		case 0x84:	/* device name */
 			if (!device_name)
-				device_name = kstrdup(&buf[2], GFP_KERNEL);
+				device_name = kstrdup(&buf[2], GFP_NOIO);
 			break;
 		}
 	}
@@ -802,36 +838,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 	kfree(firmware_ver);
 	kfree(device_name);
 
-	/* prepare ACK URB */
-	ret = -ENOMEM;
-
-	usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
-	if (!usbtouch->priv)
-		goto out_buf;
-
-	priv = usbtouch->priv;
-
-	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
-				GFP_KERNEL);
-	if (!priv->ack_buf)
-		goto err_priv;
-
-	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
-	if (!priv->ack) {
-		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
-		goto err_ack_buf;
-	}
-
 	usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
 			  priv->ack_buf, sizeof(nexio_ack_pkt),
 			  nexio_ack_complete, usbtouch);
 	ret = 0;
-	goto out_buf;
 
-err_ack_buf:
-	kfree(priv->ack_buf);
-err_priv:
-	kfree(priv);
 out_buf:
 	kfree(buf);
 	return ret;
@@ -849,29 +860,32 @@ static void nexio_exit(struct usbtouch_usb *usbtouch)
 
 static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
 {
-	int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
 	struct nexio_touch_packet *packet = (void *) pkt;
 	struct nexio_priv *priv = usbtouch->priv;
+	unsigned int data_len = be16_to_cpu(packet->data_len);
+	unsigned int x_len = be16_to_cpu(packet->x_len);
+	unsigned int y_len = be16_to_cpu(packet->y_len);
+	int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
 
 	/* got touch data? */
 	if ((pkt[0] & 0xe0) != 0xe0)
 		return 0;
 
-	if (be16_to_cpu(packet->data_len) > 0xff)
-		packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100);
-	if (be16_to_cpu(packet->x_len) > 0xff)
-		packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80);
+	if (data_len > 0xff)
+		data_len -= 0x100;
+	if (x_len > 0xff)
+		x_len -= 0x80;
 
 	/* send ACK */
 	ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
 
 	if (!usbtouch->type->max_xc) {
-		usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
-		input_set_abs_params(usbtouch->input, ABS_X, 0,
-				     2 * be16_to_cpu(packet->x_len), 0, 0);
-		usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
-		input_set_abs_params(usbtouch->input, ABS_Y, 0,
-				     2 * be16_to_cpu(packet->y_len), 0, 0);
+		usbtouch->type->max_xc = 2 * x_len;
+		input_set_abs_params(usbtouch->input, ABS_X,
+				     0, usbtouch->type->max_xc, 0, 0);
+		usbtouch->type->max_yc = 2 * y_len;
+		input_set_abs_params(usbtouch->input, ABS_Y,
+				     0, usbtouch->type->max_yc, 0, 0);
 	}
 	/*
 	 * The device reports state of IR sensors on X and Y axes.
@@ -881,22 +895,21 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
 	 * it's disabled (and untested) here as there's no X driver for that.
 	 */
 	begin_x = end_x = begin_y = end_y = -1;
-	for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+	for (x = 0; x < x_len; x++) {
 		if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
 			begin_x = x;
 			continue;
 		}
 		if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
 			end_x = x - 1;
-			for (y = be16_to_cpu(packet->x_len);
-			     y < be16_to_cpu(packet->data_len); y++) {
+			for (y = x_len; y < data_len; y++) {
 				if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
-					begin_y = y - be16_to_cpu(packet->x_len);
+					begin_y = y - x_len;
 					continue;
 				}
 				if (end_y == -1 &&
 				    begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
-					end_y = y - 1 - be16_to_cpu(packet->x_len);
+					end_y = y - 1 - x_len;
 					w = end_x - begin_x;
 					h = end_y - begin_y;
 #if 0
@@ -1104,14 +1117,14 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
-	[DEVTYPE_TC5UH] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+	[DEVTYPE_TC45USB] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x0fff,
 		.min_yc		= 0x0,
 		.max_yc		= 0x0fff,
 		.rept_size	= 5,
-		.read_data	= tc5uh_read_data,
+		.read_data	= tc45usb_read_data,
 	},
 #endif
 
@@ -1120,6 +1133,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.rept_size	= 1024,
 		.irq_always	= true,
 		.read_data	= nexio_read_data,
+		.alloc		= nexio_alloc,
 		.init		= nexio_init,
 		.exit		= nexio_exit,
 	},
@@ -1263,6 +1277,7 @@ static void usbtouch_irq(struct urb *urb)
 	usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
 
 exit:
+	usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		err("%s - usb_submit_urb failed with result: %d",
@@ -1272,25 +1287,89 @@ exit:
 static int usbtouch_open(struct input_dev *input)
 {
 	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+	int r;
 
 	usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
 
+	r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0;
+	if (r < 0)
+		goto out;
+
 	if (!usbtouch->type->irq_always) {
-		if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
-		  return -EIO;
+		if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) {
+			r = -EIO;
+			goto out_put;
+		}
 	}
 
-	return 0;
+	usbtouch->interface->needs_remote_wakeup = 1;
+out_put:
+	usb_autopm_put_interface(usbtouch->interface);
+out:
+	return r;
 }
 
 static void usbtouch_close(struct input_dev *input)
 {
 	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+	int r;
 
 	if (!usbtouch->type->irq_always)
 		usb_kill_urb(usbtouch->irq);
+	r = usb_autopm_get_interface(usbtouch->interface);
+	usbtouch->interface->needs_remote_wakeup = 0;
+	if (!r)
+		usb_autopm_put_interface(usbtouch->interface);
 }
 
+static int usbtouch_suspend
+(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	usb_kill_urb(usbtouch->irq);
+
+	return 0;
+}
+
+static int usbtouch_resume(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct input_dev *input = usbtouch->input;
+	int result = 0;
+
+	mutex_lock(&input->mutex);
+	if (input->users || usbtouch->type->irq_always)
+		result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+	mutex_unlock(&input->mutex);
+
+	return result;
+}
+
+static int usbtouch_reset_resume(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct input_dev *input = usbtouch->input;
+	int err = 0;
+
+	/* reinit the device */
+	if (usbtouch->type->init) {
+		err = usbtouch->type->init(usbtouch);
+		if (err) {
+			dbg("%s - type->init() failed, err: %d",
+			    __func__, err);
+			return err;
+		}
+	}
+
+	/* restart IO if needed */
+	mutex_lock(&input->mutex);
+	if (input->users)
+		err = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+	mutex_unlock(&input->mutex);
+
+	return err;
+}
 
 static void usbtouch_free_buffers(struct usb_device *udev,
 				  struct usbtouch_usb *usbtouch)
@@ -1411,12 +1490,21 @@ static int usbtouch_probe(struct usb_interface *intf,
 	usbtouch->irq->transfer_dma = usbtouch->data_dma;
 	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	/* device specific init */
+	/* device specific allocations */
+	if (type->alloc) {
+		err = type->alloc(usbtouch);
+		if (err) {
+			dbg("%s - type->alloc() failed, err: %d", __func__, err);
+			goto out_free_urb;
+		}
+	}
+
+	/* device specific initialisation*/
 	if (type->init) {
 		err = type->init(usbtouch);
 		if (err) {
 			dbg("%s - type->init() failed, err: %d", __func__, err);
-			goto out_free_urb;
+			goto out_do_exit;
 		}
 	}
 
@@ -1429,8 +1517,11 @@ static int usbtouch_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, usbtouch);
 
 	if (usbtouch->type->irq_always) {
+		/* this can't fail */
+		usb_autopm_get_interface(intf);
 		err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
 		if (err) {
+			usb_autopm_put_interface(intf);
 			err("%s - usb_submit_urb failed with result: %d",
 			    __func__, err);
 			goto out_unregister_input;
@@ -1481,7 +1572,11 @@ static struct usb_driver usbtouch_driver = {
 	.name		= "usbtouchscreen",
 	.probe		= usbtouch_probe,
 	.disconnect	= usbtouch_disconnect,
+	.suspend	= usbtouch_suspend,
+	.resume		= usbtouch_resume,
+	.reset_resume	= usbtouch_reset_resume,
 	.id_table	= usbtouch_devices,
+	.supports_autosuspend = 1,
 };
 
 static int __init usbtouch_init(void)
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index cc18265be1a..7a45d68c351 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -233,7 +233,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
 	w90p910_ts->state = TS_IDLE;
 	spin_lock_init(&w90p910_ts->lock);
 	setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
-		    (unsigned long)&w90p910_ts);
+		    (unsigned long)w90p910_ts);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 81bf25e67ce..e4112622e5a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -302,6 +302,15 @@ config LEDS_MC13783
 	  This option enable support for on-chip LED drivers found
 	  on Freescale Semiconductor MC13783 PMIC.
 
+config LEDS_NS2
+	tristate "LED support for Network Space v2 GPIO LEDs"
+	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+	default y
+	help
+	  This option enable support for the dual-GPIO LED found on the
+	  Network Space v2 board (and parents). This include Internet Space v2,
+	  Network Space (Max) v2 and d2 Network v2 boards.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2493de49937..7d6b95831f8 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
 obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
 obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
+obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 286b501a357..5dcdf9d69b3 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -742,7 +742,6 @@ failed_unregister_dev_file:
 	for (i--; i >= 0; i--)
 		device_remove_file(&led->client->dev, bd2802_attributes[i]);
 failed_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(led);
 
 	return ret;
@@ -759,7 +758,6 @@ static int __exit bd2802_remove(struct i2c_client *client)
 		bd2802_disable_adv_conf(led);
 	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
 		device_remove_file(&led->client->dev, bd2802_attributes[i]);
-	i2c_set_clientdata(client, NULL);
 	kfree(led);
 
 	return 0;
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
index 932a58da76c..9010c054615 100644
--- a/drivers/leds/leds-lp3944.c
+++ b/drivers/leds/leds-lp3944.c
@@ -432,7 +432,6 @@ static int __devexit lp3944_remove(struct i2c_client *client)
 		}
 
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
new file mode 100644
index 00000000000..74dce4ba026
--- /dev/null
+++ b/drivers/leds/leds-ns2.c
@@ -0,0 +1,338 @@
+/*
+ * leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <mach/leds-ns2.h>
+
+/*
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
+ * relation with the SATA activity. This capability is exposed through the
+ * "sata" sysfs attribute.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ *  cmd_led   |  slow_led  | /SATA active | LED state
+ *            |            |              |
+ *     1      |     0      |      x       |  off
+ *     -      |     1      |      x       |  on
+ *     0      |     0      |      1       |  on
+ *     0      |     0      |      0       |  blink (rate 300ms)
+ */
+
+enum ns2_led_modes {
+	NS_V2_LED_OFF,
+	NS_V2_LED_ON,
+	NS_V2_LED_SATA,
+};
+
+struct ns2_led_mode_value {
+	enum ns2_led_modes	mode;
+	int			cmd_level;
+	int			slow_level;
+};
+
+static struct ns2_led_mode_value ns2_led_modval[] = {
+	{ NS_V2_LED_OFF	, 1, 0 },
+	{ NS_V2_LED_ON	, 0, 1 },
+	{ NS_V2_LED_ON	, 1, 1 },
+	{ NS_V2_LED_SATA, 0, 0 },
+};
+
+struct ns2_led_data {
+	struct led_classdev	cdev;
+	unsigned		cmd;
+	unsigned		slow;
+	unsigned char		sata; /* True when SATA mode active. */
+	rwlock_t		rw_lock; /* Lock GPIOs. */
+};
+
+static int ns2_led_get_mode(struct ns2_led_data *led_dat,
+			    enum ns2_led_modes *mode)
+{
+	int i;
+	int ret = -EINVAL;
+	int cmd_level;
+	int slow_level;
+
+	read_lock(&led_dat->rw_lock);
+
+	cmd_level = gpio_get_value(led_dat->cmd);
+	slow_level = gpio_get_value(led_dat->slow);
+
+	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+		if (cmd_level == ns2_led_modval[i].cmd_level &&
+		    slow_level == ns2_led_modval[i].slow_level) {
+			*mode = ns2_led_modval[i].mode;
+			ret = 0;
+			break;
+		}
+	}
+
+	read_unlock(&led_dat->rw_lock);
+
+	return ret;
+}
+
+static void ns2_led_set_mode(struct ns2_led_data *led_dat,
+			     enum ns2_led_modes mode)
+{
+	int i;
+
+	write_lock(&led_dat->rw_lock);
+
+	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+		if (mode == ns2_led_modval[i].mode) {
+			gpio_set_value(led_dat->cmd,
+				       ns2_led_modval[i].cmd_level);
+			gpio_set_value(led_dat->slow,
+				       ns2_led_modval[i].slow_level);
+		}
+	}
+
+	write_unlock(&led_dat->rw_lock);
+}
+
+static void ns2_led_set(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
+	enum ns2_led_modes mode;
+
+	if (value == LED_OFF)
+		mode = NS_V2_LED_OFF;
+	else if (led_dat->sata)
+		mode = NS_V2_LED_SATA;
+	else
+		mode = NS_V2_LED_ON;
+
+	ns2_led_set_mode(led_dat, mode);
+}
+
+static ssize_t ns2_led_sata_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buff, size_t count)
+{
+	int ret;
+	unsigned long enable;
+	enum ns2_led_modes mode;
+	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+	ret = strict_strtoul(buff, 10, &enable);
+	if (ret < 0)
+		return ret;
+
+	enable = !!enable;
+
+	if (led_dat->sata == enable)
+		return count;
+
+	ret = ns2_led_get_mode(led_dat, &mode);
+	if (ret < 0)
+		return ret;
+
+	if (enable && mode == NS_V2_LED_ON)
+		ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+	if (!enable && mode == NS_V2_LED_SATA)
+		ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+	led_dat->sata = enable;
+
+	return count;
+}
+
+static ssize_t ns2_led_sata_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
+
+static int __devinit
+create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
+	       const struct ns2_led *template)
+{
+	int ret;
+	enum ns2_led_modes mode;
+
+	ret = gpio_request(template->cmd, template->name);
+	if (ret == 0) {
+		ret = gpio_direction_output(template->cmd,
+					    gpio_get_value(template->cmd));
+		if (ret)
+			gpio_free(template->cmd);
+	}
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
+			template->name);
+	}
+
+	ret = gpio_request(template->slow, template->name);
+	if (ret == 0) {
+		ret = gpio_direction_output(template->slow,
+					    gpio_get_value(template->slow));
+		if (ret)
+			gpio_free(template->slow);
+	}
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
+			template->name);
+		goto err_free_cmd;
+	}
+
+	rwlock_init(&led_dat->rw_lock);
+
+	led_dat->cdev.name = template->name;
+	led_dat->cdev.default_trigger = template->default_trigger;
+	led_dat->cdev.blink_set = NULL;
+	led_dat->cdev.brightness_set = ns2_led_set;
+	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	led_dat->cmd = template->cmd;
+	led_dat->slow = template->slow;
+
+	ret = ns2_led_get_mode(led_dat, &mode);
+	if (ret < 0)
+		goto err_free_slow;
+
+	/* Set LED initial state. */
+	led_dat->sata = (mode == NS_V2_LED_SATA) ? 1 : 0;
+	led_dat->cdev.brightness =
+		(mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
+
+	ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+	if (ret < 0)
+		goto err_free_slow;
+
+	dev_set_drvdata(led_dat->cdev.dev, led_dat);
+	ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
+	if (ret < 0)
+		goto err_free_cdev;
+
+	return 0;
+
+err_free_cdev:
+	led_classdev_unregister(&led_dat->cdev);
+err_free_slow:
+	gpio_free(led_dat->slow);
+err_free_cmd:
+	gpio_free(led_dat->cmd);
+
+	return ret;
+}
+
+static void __devexit delete_ns2_led(struct ns2_led_data *led_dat)
+{
+	device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
+	led_classdev_unregister(&led_dat->cdev);
+	gpio_free(led_dat->cmd);
+	gpio_free(led_dat->slow);
+}
+
+static int __devinit ns2_led_probe(struct platform_device *pdev)
+{
+	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+	struct ns2_led_data *leds_data;
+	int i;
+	int ret;
+
+	if (!pdata)
+		return -EINVAL;
+
+	leds_data = kzalloc(sizeof(struct ns2_led_data) *
+			    pdata->num_leds, GFP_KERNEL);
+	if (!leds_data)
+		return -ENOMEM;
+
+	for (i = 0; i < pdata->num_leds; i++) {
+		ret = create_ns2_led(pdev, &leds_data[i], &pdata->leds[i]);
+		if (ret < 0)
+			goto err;
+
+	}
+
+	platform_set_drvdata(pdev, leds_data);
+
+	return 0;
+
+err:
+	for (i = i - 1; i >= 0; i--)
+		delete_ns2_led(&leds_data[i]);
+
+	kfree(leds_data);
+
+	return ret;
+}
+
+static int __devexit ns2_led_remove(struct platform_device *pdev)
+{
+	int i;
+	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+	struct ns2_led_data *leds_data;
+
+	leds_data = platform_get_drvdata(pdev);
+
+	for (i = 0; i < pdata->num_leds; i++)
+		delete_ns2_led(&leds_data[i]);
+
+	kfree(leds_data);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver ns2_led_driver = {
+	.probe		= ns2_led_probe,
+	.remove		= __devexit_p(ns2_led_remove),
+	.driver		= {
+		.name	= "leds-ns2",
+		.owner	= THIS_MODULE,
+	},
+};
+MODULE_ALIAS("platform:leds-ns2");
+
+static int __init ns2_led_init(void)
+{
+	return platform_driver_register(&ns2_led_driver);
+}
+
+static void __exit ns2_led_exit(void)
+{
+	platform_driver_unregister(&ns2_led_driver);
+}
+
+module_init(ns2_led_init);
+module_exit(ns2_led_exit);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("Network Space v2 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 6682175fa9f..43d08756d82 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -320,10 +320,8 @@ static int pca9532_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	err = pca9532_configure(client, data, pca9532_pdata);
-	if (err) {
+	if (err)
 		kfree(data);
-		i2c_set_clientdata(client, NULL);
-	}
 
 	return err;
 }
@@ -351,7 +349,6 @@ static int pca9532_remove(struct i2c_client *client)
 		}
 
 	kfree(data);
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 8ff50f23419..66aa3e8e786 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -342,7 +342,6 @@ exit:
 	}
 
 	kfree(pca955x);
-	i2c_set_clientdata(client, NULL);
 
 	return err;
 }
@@ -358,7 +357,6 @@ static int __devexit pca955x_remove(struct i2c_client *client)
 	}
 
 	kfree(pca955x);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 97147804a49..b6e7ddc09d7 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -492,8 +492,8 @@ static void macio_pci_add_devices(struct macio_chip *chip)
 	}
 
 	/* Add media bay devices if any */
-	pnode = mbdev->ofdev.dev.of_node;
-	if (mbdev)
+	if (mbdev) {
+		pnode = mbdev->ofdev.dev.of_node;
 		for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
 			if (macio_skip_device(np))
 				continue;
@@ -502,10 +502,11 @@ static void macio_pci_add_devices(struct macio_chip *chip)
 						 mbdev,  root_res) == NULL)
 				of_node_put(np);
 		}
+	}
 
 	/* Add serial ports if any */
-	pnode = sdev->ofdev.dev.of_node;
 	if (sdev) {
+		pnode = sdev->ofdev.dev.of_node;
 		for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
 			if (macio_skip_device(np))
 				continue;
@@ -525,7 +526,6 @@ static void macio_pci_add_devices(struct macio_chip *chip)
 int macio_register_driver(struct macio_driver *drv)
 {
 	/* initialize common driver fields */
-	drv->driver.name = drv->name;
 	drv->driver.bus = &macio_bus_type;
 
 	/* register with core */
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 288acce76b7..2fd435bc542 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -728,8 +728,10 @@ static struct of_device_id media_bay_match[] =
 
 static struct macio_driver media_bay_driver =
 {
-	.name		= "media-bay",
-	.match_table	= media_bay_match,
+	.driver = {
+		.name		= "media-bay",
+		.of_match_table	= media_bay_match,
+	},
 	.probe		= media_bay_attach,
 	.suspend	= media_bay_suspend,
 	.resume		= media_bay_resume
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 12946c5f583..53cce3a5da2 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -584,9 +584,11 @@ static struct of_device_id rackmeter_match[] = {
 };
 
 static struct macio_driver rackmeter_driver = {
-	.name = "rackmeter",
-	.owner = THIS_MODULE,
-	.match_table = rackmeter_match,
+	.driver = {
+		.name = "rackmeter",
+		.owner = THIS_MODULE,
+		.of_match_table = rackmeter_match,
+	},
 	.probe = rackmeter_probe,
 	.remove = __devexit_p(rackmeter_remove),
 	.shutdown = rackmeter_shutdown,
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 16d82f17ae8..c42eeb43042 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -182,7 +182,6 @@ remove_thermostat(struct i2c_client *client)
 
 	thermostat = NULL;
 
-	i2c_set_clientdata(client, NULL);
 	kfree(th);
 
 	return 0;
@@ -400,7 +399,6 @@ static int probe_thermostat(struct i2c_client *client,
 	rc = read_reg(th, CONFIG_REG);
 	if (rc < 0) {
 		dev_err(&client->dev, "Thermostat failed to read config!\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(th);
 		return -ENODEV;
 	}
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index d8257d35afd..647c6add219 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -107,10 +107,8 @@ static int wf_lm75_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, lm);
 
 	rc = wf_register_sensor(&lm->sens);
-	if (rc) {
-		i2c_set_clientdata(client, NULL);
+	if (rc)
 		kfree(lm);
-	}
 
 	return rc;
 }
@@ -216,7 +214,6 @@ static int wf_lm75_remove(struct i2c_client *client)
 	/* release sensor */
 	wf_unregister_sensor(&lm->sens);
 
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index b486eb929fd..8204113268f 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -81,7 +81,6 @@ static int wf_max6690_probe(struct i2c_client *client,
 
 	rc = wf_register_sensor(&max->sens);
 	if (rc) {
-		i2c_set_clientdata(client, NULL);
 		kfree(max);
 	}
 
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index e20330a2895..65a8ff3e1f8 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -376,7 +376,6 @@ static int wf_sat_remove(struct i2c_client *client)
 	/* XXX TODO */
 
 	sat->i2c = NULL;
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 46b3a044ead..cb20d0b0555 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2087,6 +2087,7 @@ static void sync_sbs(mddev_t * mddev, int nospares)
 	/* First make sure individual recovery_offsets are correct */
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk >= 0 &&
+		    mddev->delta_disks >= 0 &&
 		    !test_bit(In_sync, &rdev->flags) &&
 		    mddev->curr_resync_completed > rdev->recovery_offset)
 				rdev->recovery_offset = mddev->curr_resync_completed;
@@ -3001,6 +3002,9 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 		return -EINVAL;
 	}
 
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		rdev->new_raid_disk = rdev->raid_disk;
+
 	/* ->takeover must set new_* and/or delta_disks
 	 * if it succeeds, and may set them when it fails.
 	 */
@@ -3051,13 +3055,35 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 		mddev->safemode = 0;
 	}
 
-	module_put(mddev->pers->owner);
-	/* Invalidate devices that are now superfluous */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
-		if (rdev->raid_disk >= mddev->raid_disks) {
-			rdev->raid_disk = -1;
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		char nm[20];
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk > mddev->raid_disks)
+			rdev->new_raid_disk = -1;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		sprintf(nm, "rd%d", rdev->raid_disk);
+		sysfs_remove_link(&mddev->kobj, nm);
+	}
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		rdev->raid_disk = rdev->new_raid_disk;
+		if (rdev->raid_disk < 0)
 			clear_bit(In_sync, &rdev->flags);
+		else {
+			char nm[20];
+			sprintf(nm, "rd%d", rdev->raid_disk);
+			if(sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
+				printk("md: cannot register %s for %s after level change\n",
+				       nm, mdname(mddev));
 		}
+	}
+
+	module_put(mddev->pers->owner);
 	mddev->pers = pers;
 	mddev->private = priv;
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -5895,6 +5921,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 	atomic_inc(&mddev->openers);
 	mutex_unlock(&mddev->open_mutex);
 
+	check_disk_size_change(mddev->gendisk, bdev);
  out:
 	return err;
 }
@@ -6846,6 +6873,7 @@ void md_do_sync(mddev_t *mddev)
 			rcu_read_lock();
 			list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
 				if (rdev->raid_disk >= 0 &&
+				    mddev->delta_disks >= 0 &&
 				    !test_bit(Faulty, &rdev->flags) &&
 				    !test_bit(In_sync, &rdev->flags) &&
 				    rdev->recovery_offset < mddev->curr_resync)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7ab5ea15545..10597bfec00 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -78,6 +78,9 @@ struct mdk_rdev_s
 
 	int desc_nr;			/* descriptor index in the superblock */
 	int raid_disk;			/* role of device in array */
+	int new_raid_disk;		/* role that the device will have in
+					 * the array after a level-change completes.
+					 */
 	int saved_raid_disk;		/* role that device used to have in the
 					 * array and could again if we did a partial
 					 * resync from the bitmap
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index e70f004c99e..563abed5a2c 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -173,9 +173,11 @@ static int create_strip_zones(mddev_t *mddev, raid0_conf_t **private_conf)
 	list_for_each_entry(rdev1, &mddev->disks, same_set) {
 		int j = rdev1->raid_disk;
 
-		if (mddev->level == 10)
+		if (mddev->level == 10) {
 			/* taking over a raid10-n2 array */
 			j /= 2;
+			rdev1->new_raid_disk = j;
+		}
 
 		if (j < 0 || j >= mddev->raid_disks) {
 			printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
@@ -361,12 +363,6 @@ static int raid0_run(mddev_t *mddev)
 		mddev->private = conf;
 	}
 	conf = mddev->private;
-	if (conf->scale_raid_disks) {
-		int i;
-		for (i=0; i < conf->strip_zone[0].nb_dev; i++)
-			conf->devlist[i]->raid_disk /= conf->scale_raid_disks;
-		/* FIXME update sysfs rd links */
-	}
 
 	/* calculate array device size */
 	md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
@@ -573,7 +569,7 @@ static void raid0_status(struct seq_file *seq, mddev_t *mddev)
 	return;
 }
 
-static void *raid0_takeover_raid5(mddev_t *mddev)
+static void *raid0_takeover_raid45(mddev_t *mddev)
 {
 	mdk_rdev_t *rdev;
 	raid0_conf_t *priv_conf;
@@ -596,6 +592,7 @@ static void *raid0_takeover_raid5(mddev_t *mddev)
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->raid_disks--;
 	mddev->delta_disks = -1;
@@ -635,6 +632,7 @@ static void *raid0_takeover_raid10(mddev_t *mddev)
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = - mddev->raid_disks / 2;
 	mddev->raid_disks += mddev->delta_disks;
@@ -643,19 +641,22 @@ static void *raid0_takeover_raid10(mddev_t *mddev)
 	mddev->recovery_cp = MaxSector;
 
 	create_strip_zones(mddev, &priv_conf);
-	priv_conf->scale_raid_disks = 2;
 	return priv_conf;
 }
 
 static void *raid0_takeover(mddev_t *mddev)
 {
 	/* raid0 can take over:
+	 *  raid4 - if all data disks are active.
 	 *  raid5 - providing it is Raid4 layout and one disk is faulty
 	 *  raid10 - assuming we have all necessary active disks
 	 */
+	if (mddev->level == 4)
+		return raid0_takeover_raid45(mddev);
+
 	if (mddev->level == 5) {
 		if (mddev->layout == ALGORITHM_PARITY_N)
-			return raid0_takeover_raid5(mddev);
+			return raid0_takeover_raid45(mddev);
 
 		printk(KERN_ERR "md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
 		       mdname(mddev), ALGORITHM_PARITY_N);
diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h
index d724e664ca4..91f8e876ee6 100644
--- a/drivers/md/raid0.h
+++ b/drivers/md/raid0.h
@@ -13,9 +13,6 @@ struct raid0_private_data
 	struct strip_zone *strip_zone;
 	mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
 	int nr_strip_zones;
-	int scale_raid_disks; /* divide rdev->raid_disks by this in run()
-			       * to handle conversion from raid10
-			       */
 };
 
 typedef struct raid0_private_data raid0_conf_t;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 03724992cdf..42e64e4e5e2 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1482,14 +1482,14 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 	int sectors = r10_bio->sectors;
 	mdk_rdev_t*rdev;
 	int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
+	int d = r10_bio->devs[r10_bio->read_slot].devnum;
 
 	rcu_read_lock();
-	{
-		int d = r10_bio->devs[r10_bio->read_slot].devnum;
+	rdev = rcu_dereference(conf->mirrors[d].rdev);
+	if (rdev) { /* If rdev is not NULL */
 		char b[BDEVNAME_SIZE];
 		int cur_read_error_count = 0;
 
-		rdev = rcu_dereference(conf->mirrors[d].rdev);
 		bdevname(rdev->bdev, b);
 
 		if (test_bit(Faulty, &rdev->flags)) {
@@ -1530,7 +1530,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 
 		rcu_read_lock();
 		do {
-			int d = r10_bio->devs[sl].devnum;
+			d = r10_bio->devs[sl].devnum;
 			rdev = rcu_dereference(conf->mirrors[d].rdev);
 			if (rdev &&
 			    test_bit(In_sync, &rdev->flags)) {
@@ -1564,7 +1564,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 		rcu_read_lock();
 		while (sl != r10_bio->read_slot) {
 			char b[BDEVNAME_SIZE];
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
@@ -1601,7 +1601,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 		}
 		sl = start;
 		while (sl != r10_bio->read_slot) {
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
@@ -2161,22 +2161,22 @@ static conf_t *setup_conf(mddev_t *mddev)
 	sector_t stride, size;
 	int err = -EINVAL;
 
-	if (mddev->chunk_sectors < (PAGE_SIZE >> 9) ||
-	    !is_power_of_2(mddev->chunk_sectors)) {
+	if (mddev->new_chunk_sectors < (PAGE_SIZE >> 9) ||
+	    !is_power_of_2(mddev->new_chunk_sectors)) {
 		printk(KERN_ERR "md/raid10:%s: chunk size must be "
 		       "at least PAGE_SIZE(%ld) and be a power of 2.\n",
 		       mdname(mddev), PAGE_SIZE);
 		goto out;
 	}
 
-	nc = mddev->layout & 255;
-	fc = (mddev->layout >> 8) & 255;
-	fo = mddev->layout & (1<<16);
+	nc = mddev->new_layout & 255;
+	fc = (mddev->new_layout >> 8) & 255;
+	fo = mddev->new_layout & (1<<16);
 
 	if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
-	    (mddev->layout >> 17)) {
+	    (mddev->new_layout >> 17)) {
 		printk(KERN_ERR "md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
-		       mdname(mddev), mddev->layout);
+		       mdname(mddev), mddev->new_layout);
 		goto out;
 	}
 
@@ -2241,7 +2241,6 @@ static conf_t *setup_conf(mddev_t *mddev)
 	if (!conf->thread)
 		goto out;
 
-	conf->scale_disks = 0;
 	conf->mddev = mddev;
 	return conf;
 
@@ -2300,11 +2299,6 @@ static int run(mddev_t *mddev)
 		if (disk_idx >= conf->raid_disks
 		    || disk_idx < 0)
 			continue;
-		if (conf->scale_disks) {
-			disk_idx *= conf->scale_disks;
-			rdev->raid_disk = disk_idx;
-			/* MOVE 'rd%d' link !! */
-		}
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
@@ -2435,26 +2429,22 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	/* Update slot numbers to obtain
-	 * degraded raid10 with missing mirrors
-	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set) {
-		rdev->raid_disk *= 2;
-	}
-
 	/* Set new parameters */
 	mddev->new_level = 10;
 	/* new layout: far_copies = 1, near_copies = 2 */
 	mddev->new_layout = (1<<8) + 2;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = mddev->raid_disks;
-	mddev->degraded = mddev->raid_disks;
 	mddev->raid_disks *= 2;
 	/* make sure it will be not marked as dirty */
 	mddev->recovery_cp = MaxSector;
 
 	conf = setup_conf(mddev);
-	conf->scale_disks = 2;
+	if (!IS_ERR(conf))
+		list_for_each_entry(rdev, &mddev->disks, same_set)
+			if (rdev->raid_disk >= 0)
+				rdev->new_raid_disk = rdev->raid_disk * 2;
+		
 	return conf;
 }
 
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 3824a087e17..2316ac2e8e2 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -38,11 +38,6 @@ struct r10_private_data_s {
 	int chunk_shift; /* shift from chunks to sectors */
 	sector_t chunk_mask;
 
-	int			scale_disks;  /* When starting array, multiply
-					       * each ->raid_disk by this.
-					       * Need for raid0->raid10 migration
-					       */
-
 	struct list_head	retry_list;
 	/* queue pending writes and submit them on unplug */
 	struct bio_list		pending_bio_list;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d2c0f94fa37..96c690279fc 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -277,12 +277,13 @@ out:
 	return sh;
 }
 
-static void shrink_buffers(struct stripe_head *sh, int num)
+static void shrink_buffers(struct stripe_head *sh)
 {
 	struct page *p;
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num ; i++) {
+	for (i = 0; i < num ; i++) {
 		p = sh->dev[i].page;
 		if (!p)
 			continue;
@@ -291,11 +292,12 @@ static void shrink_buffers(struct stripe_head *sh, int num)
 	}
 }
 
-static int grow_buffers(struct stripe_head *sh, int num)
+static int grow_buffers(struct stripe_head *sh)
 {
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num; i++) {
+	for (i = 0; i < num; i++) {
 		struct page *page;
 
 		if (!(page = alloc_page(GFP_KERNEL))) {
@@ -364,6 +366,73 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector,
 	return NULL;
 }
 
+/*
+ * Need to check if array has failed when deciding whether to:
+ *  - start an array
+ *  - remove non-faulty devices
+ *  - add a spare
+ *  - allow a reshape
+ * This determination is simple when no reshape is happening.
+ * However if there is a reshape, we need to carefully check
+ * both the before and after sections.
+ * This is because some failed devices may only affect one
+ * of the two sections, and some non-in_sync devices may
+ * be insync in the section most affected by failed devices.
+ */
+static int has_failed(raid5_conf_t *conf)
+{
+	int degraded;
+	int i;
+	if (conf->mddev->reshape_position == MaxSector)
+		return conf->mddev->degraded > conf->max_degraded;
+
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->previous_raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If the reshape increases the number of devices,
+			 * this is being recovered by the reshape, so
+			 * this 'previous' section is not in_sync.
+			 * If the number of devices is being reduced however,
+			 * the device can only be part of the array if
+			 * we are reverting a reshape, so this section will
+			 * be in-sync.
+			 */
+			if (conf->raid_disks >= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If reshape increases the number of devices, this
+			 * section has already been recovered, else it
+			 * almost certainly hasn't.
+			 */
+			if (conf->raid_disks <= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	return 0;
+}
+
 static void unplug_slaves(mddev_t *mddev);
 static void raid5_unplug_device(struct request_queue *q);
 
@@ -1240,19 +1309,18 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
 static int grow_one_stripe(raid5_conf_t *conf)
 {
 	struct stripe_head *sh;
-	int disks = max(conf->raid_disks, conf->previous_raid_disks);
 	sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
 	if (!sh)
 		return 0;
-	memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
+	memset(sh, 0, sizeof(*sh) + (conf->pool_size-1)*sizeof(struct r5dev));
 	sh->raid_conf = conf;
 	spin_lock_init(&sh->lock);
 	#ifdef CONFIG_MULTICORE_RAID456
 	init_waitqueue_head(&sh->ops.wait_for_ops);
 	#endif
 
-	if (grow_buffers(sh, disks)) {
-		shrink_buffers(sh, disks);
+	if (grow_buffers(sh)) {
+		shrink_buffers(sh);
 		kmem_cache_free(conf->slab_cache, sh);
 		return 0;
 	}
@@ -1468,7 +1536,7 @@ static int drop_one_stripe(raid5_conf_t *conf)
 	if (!sh)
 		return 0;
 	BUG_ON(atomic_read(&sh->count));
-	shrink_buffers(sh, conf->pool_size);
+	shrink_buffers(sh);
 	kmem_cache_free(conf->slab_cache, sh);
 	atomic_dec(&conf->active_stripes);
 	return 1;
@@ -2963,7 +3031,6 @@ static void handle_stripe5(struct stripe_head *sh)
 		mdk_rdev_t *rdev;
 
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx toread %p read %p write %p "
 			"written %p\n",	i, dev->flags, dev->toread, dev->read,
@@ -3000,17 +3067,27 @@ static void handle_stripe5(struct stripe_head *sh)
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* could be in-sync depending on recovery/reshape status */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			s.failed++;
 			s.failed_num = i;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
@@ -3244,7 +3321,6 @@ static void handle_stripe6(struct stripe_head *sh)
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
 			i, dev->flags, dev->toread, dev->towrite, dev->written);
@@ -3282,18 +3358,28 @@ static void handle_stripe6(struct stripe_head *sh)
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* in sync if before recovery_offset */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			if (s.failed < 2)
 				r6s.failed_num[s.failed] = i;
 			s.failed++;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
@@ -4971,8 +5057,10 @@ static int run(mddev_t *mddev)
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk < 0)
 			continue;
-		if (test_bit(In_sync, &rdev->flags))
+		if (test_bit(In_sync, &rdev->flags)) {
 			working_disks++;
+			continue;
+		}
 		/* This disc is not fully in-sync.  However if it
 		 * just stored parity (beyond the recovery_offset),
 		 * when we don't need to be concerned about the
@@ -5005,7 +5093,7 @@ static int run(mddev_t *mddev)
 	mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
 			   - working_disks);
 
-	if (mddev->degraded > conf->max_degraded) {
+	if (has_failed(conf)) {
 		printk(KERN_ERR "md/raid:%s: not enough operational devices"
 			" (%d/%d failed)\n",
 			mdname(mddev), mddev->degraded, conf->raid_disks);
@@ -5207,6 +5295,7 @@ static int raid5_spare_active(mddev_t *mddev)
 	for (i = 0; i < conf->raid_disks; i++) {
 		tmp = conf->disks + i;
 		if (tmp->rdev
+		    && tmp->rdev->recovery_offset == MaxSector
 		    && !test_bit(Faulty, &tmp->rdev->flags)
 		    && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
 			unsigned long flags;
@@ -5242,7 +5331,7 @@ static int raid5_remove_disk(mddev_t *mddev, int number)
 		 * isn't possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
-		    mddev->degraded <= conf->max_degraded &&
+		    !has_failed(conf) &&
 		    number < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;
@@ -5270,7 +5359,7 @@ static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	int first = 0;
 	int last = conf->raid_disks - 1;
 
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		/* no point adding a device */
 		return -EINVAL;
 
@@ -5362,7 +5451,7 @@ static int check_reshape(mddev_t *mddev)
 	if (mddev->bitmap)
 		/* Cannot grow a bitmap yet */
 		return -EBUSY;
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		return -EINVAL;
 	if (mddev->delta_disks < 0) {
 		/* We might be able to shrink, but the devices must
@@ -5437,8 +5526,13 @@ static int raid5_start_reshape(mddev_t *mddev)
 
 	/* Add some new drives, as many as will fit.
 	 * We know there are enough to make the newly sized array work.
+	 * Don't add devices if we are reducing the number of
+	 * devices in the array.  This is because it is not possible
+	 * to correctly record the "partially reconstructed" state of
+	 * such devices during the reshape and confusion could result.
 	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
+	if (mddev->delta_disks >= 0)
+	    list_for_each_entry(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk < 0 &&
 		    !test_bit(Faulty, &rdev->flags)) {
 			if (raid5_add_disk(mddev, rdev) == 0) {
@@ -5460,7 +5554,7 @@ static int raid5_start_reshape(mddev_t *mddev)
 		}
 
 	/* When a reshape changes the number of devices, ->degraded
-	 * is measured against the large of the pre and post number of
+	 * is measured against the larger of the pre and post number of
 	 * devices.*/
 	if (mddev->delta_disks > 0) {
 		spin_lock_irqsave(&conf->device_lock, flags);
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 195c6cf359f..999a8250b3c 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -8,11 +8,23 @@ config VIDEO_IR
 	depends on IR_CORE
 	default IR_CORE
 
+config LIRC
+	tristate
+	default y
+
+	---help---
+	   Enable this option to build the Linux Infrared Remote
+	   Control (LIRC) core device interface driver. The LIRC
+	   interface passes raw IR to and from userspace, where the
+	   LIRC daemon handles protocol decoding for IR reception ann
+	   encoding for IR transmitting (aka "blasting").
+
 source "drivers/media/IR/keymaps/Kconfig"
 
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -22,6 +34,7 @@ config IR_NEC_DECODER
 config IR_RC5_DECODER
 	tristate "Enable IR raw decoder for the RC-5 protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -31,6 +44,7 @@ config IR_RC5_DECODER
 config IR_RC6_DECODER
 	tristate "Enable IR raw decoder for the RC6 protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -40,6 +54,7 @@ config IR_RC6_DECODER
 config IR_JVC_DECODER
 	tristate "Enable IR raw decoder for the JVC protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -55,6 +70,16 @@ config IR_SONY_DECODER
 	   Enable this option if you have an infrared remote control which
 	   uses the Sony protocol, and you need software decoding support.
 
+config IR_LIRC_CODEC
+	tristate "Enable IR to LIRC bridge"
+	depends on IR_CORE
+	depends on LIRC
+	default y
+
+	---help---
+	   Enable this option to pass raw IR to and from userspace via
+	   the LIRC interface.
+
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
@@ -66,3 +91,15 @@ config IR_IMON
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called imon.
+
+config IR_MCEUSB
+	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a Windows Media Center Edition
+	   eHome Infrared Transceiver.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called mceusb.
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index b998fcced2e..2ae4f3abfdb 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -5,11 +5,14 @@ obj-y += keymaps/
 
 obj-$(CONFIG_IR_CORE) += ir-core.o
 obj-$(CONFIG_VIDEO_IR) += ir-common.o
+obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
 obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
 obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
 obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
+obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
+obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 5e204567000..65c125e44e9 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -94,6 +94,7 @@ struct imon_context {
 
 	bool display_supported;		/* not all controllers do */
 	bool display_isopen;		/* display port has been opened */
+	bool rf_device;			/* true if iMON 2.4G LT/DT RF device */
 	bool rf_isassociating;		/* RF remote associating */
 	bool dev_present_intf0;		/* USB device presence, interface 0 */
 	bool dev_present_intf1;		/* USB device presence, interface 1 */
@@ -385,7 +386,7 @@ static int display_open(struct inode *inode, struct file *file)
 		err("%s: display port is already open", __func__);
 		retval = -EBUSY;
 	} else {
-		ictx->display_isopen = 1;
+		ictx->display_isopen = true;
 		file->private_data = ictx;
 		dev_dbg(ictx->dev, "display port opened\n");
 	}
@@ -406,7 +407,7 @@ static int display_close(struct inode *inode, struct file *file)
 	struct imon_context *ictx = NULL;
 	int retval = 0;
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 
 	if (!ictx) {
 		err("%s: no context for device", __func__);
@@ -422,7 +423,7 @@ static int display_close(struct inode *inode, struct file *file)
 		err("%s: display is not open", __func__);
 		retval = -EIO;
 	} else {
-		ictx->display_isopen = 0;
+		ictx->display_isopen = false;
 		dev_dbg(ictx->dev, "display port closed\n");
 		if (!ictx->dev_present_intf0) {
 			/*
@@ -491,12 +492,12 @@ static int send_packet(struct imon_context *ictx)
 	}
 
 	init_completion(&ictx->tx.finished);
-	ictx->tx.busy = 1;
+	ictx->tx.busy = true;
 	smp_rmb(); /* ensure later readers know we're busy */
 
 	retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
 	if (retval) {
-		ictx->tx.busy = 0;
+		ictx->tx.busy = false;
 		smp_rmb(); /* ensure later readers know we're not busy */
 		err("%s: error submitting urb(%d)", __func__, retval);
 	} else {
@@ -682,7 +683,7 @@ static ssize_t store_associate_remote(struct device *d,
 		return -ENODEV;
 
 	mutex_lock(&ictx->lock);
-	ictx->rf_isassociating = 1;
+	ictx->rf_isassociating = true;
 	send_associate_24g(ictx);
 	mutex_unlock(&ictx->lock);
 
@@ -811,7 +812,7 @@ static ssize_t vfd_write(struct file *file, const char *buf,
 	const unsigned char vfd_packet6[] = {
 		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 	if (!ictx) {
 		err("%s: no context for device", __func__);
 		return -ENODEV;
@@ -895,7 +896,7 @@ static ssize_t lcd_write(struct file *file, const char *buf,
 	int retval = 0;
 	struct imon_context *ictx;
 
-	ictx = (struct imon_context *)file->private_data;
+	ictx = file->private_data;
 	if (!ictx) {
 		err("%s: no context for device", __func__);
 		return -ENODEV;
@@ -950,7 +951,7 @@ static void usb_tx_callback(struct urb *urb)
 	ictx->tx.status = urb->status;
 
 	/* notify waiters that write has finished */
-	ictx->tx.busy = 0;
+	ictx->tx.busy = false;
 	smp_rmb(); /* ensure later readers know we're not busy */
 	complete(&ictx->tx.finished);
 }
@@ -1215,7 +1216,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
 {
 	char rel_x = 0x00, rel_y = 0x00;
 	u8 right_shift = 1;
-	bool mouse_input = 1;
+	bool mouse_input = true;
 	int dir = 0;
 
 	/* newer iMON device PAD or mouse button */
@@ -1246,7 +1247,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
 	} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
 		dir = -1;
 	} else
-		mouse_input = 0;
+		mouse_input = false;
 
 	if (mouse_input) {
 		dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
@@ -1450,7 +1451,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	unsigned char *buf = urb->transfer_buffer;
 	struct device *dev = ictx->dev;
 	u32 kc;
-	bool norelease = 0;
+	bool norelease = false;
 	int i;
 	u64 temp_key;
 	u64 panel_key = 0;
@@ -1465,7 +1466,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	idev = ictx->idev;
 
 	/* filter out junk data on the older 0xffdc imon devices */
-	if ((buf[0] == 0xff) && (buf[7] == 0xff))
+	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
 		return;
 
 	/* Figure out what key was pressed */
@@ -1517,7 +1518,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	     !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
 		len = 8;
 		imon_pad_to_keys(ictx, buf);
-		norelease = 1;
+		norelease = true;
 	}
 
 	if (debug) {
@@ -1580,7 +1581,7 @@ not_input_data:
 	    (buf[6] == 0x5E && buf[7] == 0xDF))) {	/* DT */
 		dev_warn(dev, "%s: remote associated refid=%02X\n",
 			 __func__, buf[1]);
-		ictx->rf_isassociating = 0;
+		ictx->rf_isassociating = false;
 	}
 }
 
@@ -1790,9 +1791,9 @@ static bool imon_find_endpoints(struct imon_context *ictx,
 	int ifnum = iface_desc->desc.bInterfaceNumber;
 	int num_endpts = iface_desc->desc.bNumEndpoints;
 	int i, ep_dir, ep_type;
-	bool ir_ep_found = 0;
-	bool display_ep_found = 0;
-	bool tx_control = 0;
+	bool ir_ep_found = false;
+	bool display_ep_found = false;
+	bool tx_control = false;
 
 	/*
 	 * Scan the endpoint list and set:
@@ -1808,13 +1809,13 @@ static bool imon_find_endpoints(struct imon_context *ictx,
 		    ep_type == USB_ENDPOINT_XFER_INT) {
 
 			rx_endpoint = ep;
-			ir_ep_found = 1;
+			ir_ep_found = true;
 			dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
 
 		} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
 			   ep_type == USB_ENDPOINT_XFER_INT) {
 			tx_endpoint = ep;
-			display_ep_found = 1;
+			display_ep_found = true;
 			dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
 		}
 	}
@@ -1835,8 +1836,8 @@ static bool imon_find_endpoints(struct imon_context *ictx,
 	 * newer iMON devices that use control urb instead of interrupt
 	 */
 	if (!display_ep_found) {
-		tx_control = 1;
-		display_ep_found = 1;
+		tx_control = true;
+		display_ep_found = true;
 		dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
 			"interface OUT endpoint\n", __func__);
 	}
@@ -1847,7 +1848,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
 	 * and without... :\
 	 */
 	if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
-		display_ep_found = 0;
+		display_ep_found = false;
 		dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
 	}
 
@@ -1856,7 +1857,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
 	 * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
 	 */
 	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
-		display_ep_found = 0;
+		display_ep_found = false;
 		dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
 	}
 
@@ -1905,9 +1906,10 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 
 	ictx->dev = dev;
 	ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf0 = 1;
+	ictx->dev_present_intf0 = true;
 	ictx->rx_urb_intf0 = rx_urb;
 	ictx->tx_urb = tx_urb;
+	ictx->rf_device = false;
 
 	ictx->vendor  = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
 	ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
@@ -1941,7 +1943,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 	return ictx;
 
 urb_submit_failed:
-	input_unregister_device(ictx->idev);
+	ir_input_unregister(ictx->idev);
 	input_free_device(ictx->idev);
 idev_setup_failed:
 find_endpoint_failed:
@@ -1979,7 +1981,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 	}
 
 	ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf1 = 1;
+	ictx->dev_present_intf1 = true;
 	ictx->rx_urb_intf1 = rx_urb;
 
 	ret = -ENODEV;
@@ -2047,6 +2049,12 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
 		ictx->display_supported = false;
 		break;
+	/* iMON 2.4G LT (usb stick), no display, iMON RF */
+	case 0x4e:
+		dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
+		ictx->display_supported = false;
+		ictx->rf_device = true;
+		break;
 	/* iMON VFD, no IR (does have vol knob tho) */
 	case 0x35:
 		dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
@@ -2059,6 +2067,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		break;
 	/* iMON LCD, MCE IR */
+	case 0x9e:
 	case 0x9f:
 		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_LCD;
@@ -2197,15 +2206,6 @@ static int __devinit imon_probe(struct usb_interface *interface,
 			goto fail;
 		}
 
-		if (product == 0xffdc) {
-			/* RF products *also* use 0xffdc... sigh... */
-			sysfs_err = sysfs_create_group(&interface->dev.kobj,
-						       &imon_rf_attribute_group);
-			if (sysfs_err)
-				err("%s: Could not create RF sysfs entries(%d)",
-				    __func__, sysfs_err);
-		}
-
 	} else {
 	/* this is the secondary interface on the device */
 		ictx = imon_init_intf1(interface, first_if_ctx);
@@ -2233,6 +2233,14 @@ static int __devinit imon_probe(struct usb_interface *interface,
 
 		imon_set_display_type(ictx, interface);
 
+		if (product == 0xffdc && ictx->rf_device) {
+			sysfs_err = sysfs_create_group(&interface->dev.kobj,
+						       &imon_rf_attribute_group);
+			if (sysfs_err)
+				err("%s: Could not create RF sysfs entries(%d)",
+				    __func__, sysfs_err);
+		}
+
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
 	}
@@ -2297,9 +2305,9 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
 	}
 
 	if (ifnum == 0) {
-		ictx->dev_present_intf0 = 0;
+		ictx->dev_present_intf0 = false;
 		usb_kill_urb(ictx->rx_urb_intf0);
-		input_unregister_device(ictx->idev);
+		ir_input_unregister(ictx->idev);
 		if (ictx->display_supported) {
 			if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
 				usb_deregister_dev(interface, &imon_lcd_class);
@@ -2307,7 +2315,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
 				usb_deregister_dev(interface, &imon_vfd_class);
 		}
 	} else {
-		ictx->dev_present_intf1 = 0;
+		ictx->dev_present_intf1 = false;
 		usb_kill_urb(ictx->rx_urb_intf1);
 		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
 			input_unregister_device(ictx->touch);
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 9a5e65a471a..babd52061bc 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -22,17 +22,62 @@
 struct ir_raw_handler {
 	struct list_head list;
 
+	u64 protocols; /* which are handled by this handler */
 	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+
+	/* These two should only be used by the lirc decoder */
 	int (*raw_register)(struct input_dev *input_dev);
 	int (*raw_unregister)(struct input_dev *input_dev);
 };
 
 struct ir_raw_event_ctrl {
+	struct list_head		list;		/* to keep track of raw clients */
 	struct work_struct		rx_work;	/* for the rx decoding workqueue */
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
 	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
+	u64				enabled_protocols; /* enabled raw protocol decoders */
+
+	/* raw decoder state follows */
+	struct ir_raw_event prev_ev;
+	struct nec_dec {
+		int state;
+		unsigned count;
+		u32 bits;
+	} nec;
+	struct rc5_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc5;
+	struct rc6_dec {
+		int state;
+		u8 header;
+		u32 body;
+		bool toggle;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc6;
+	struct sony_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+	} sony;
+	struct jvc_dec {
+		int state;
+		u16 bits;
+		u16 old_bits;
+		unsigned count;
+		bool first;
+		bool toggle;
+	} jvc;
+	struct lirc_codec {
+		struct ir_input_dev *ir_dev;
+		struct lirc_driver *drv;
+		int lircdata;
+	} lirc;
 };
 
 /* macros for IR decoders */
@@ -74,6 +119,7 @@ void ir_unregister_class(struct input_dev *input_dev);
 /*
  * Routines from ir-raw-event.c to be used internally and by decoders
  */
+u64 ir_raw_get_allowed_protocols(void);
 int ir_raw_event_register(struct input_dev *input_dev);
 void ir_raw_event_unregister(struct input_dev *input_dev);
 int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
@@ -123,4 +169,12 @@ void ir_raw_init(void);
 #define load_sony_decode()	0
 #endif
 
+/* from ir-lirc-codec.c */
+#ifdef CONFIG_IR_LIRC_CODEC_MODULE
+#define load_lirc_codec()	request_module("ir-lirc-codec")
+#else
+#define load_lirc_codec()	0
+#endif
+
+
 #endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
index 0b804944cbb..8894d8b3604 100644
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ b/drivers/media/IR/ir-jvc-decoder.c
@@ -25,10 +25,6 @@
 #define JVC_TRAILER_PULSE	(1  * JVC_UNIT)
 #define	JVC_TRAILER_SPACE	(35 * JVC_UNIT)
 
-/* Used to register jvc_decoder clients */
-static LIST_HEAD(decoder_list);
-DEFINE_SPINLOCK(decoder_lock);
-
 enum jvc_state {
 	STATE_INACTIVE,
 	STATE_HEADER_SPACE,
@@ -38,87 +34,6 @@ enum jvc_state {
 	STATE_TRAILER_SPACE,
 };
 
-struct decoder_data {
-	struct list_head	list;
-	struct ir_input_dev	*ir_dev;
-	int			enabled:1;
-
-	/* State machine control */
-	enum jvc_state		state;
-	u16			jvc_bits;
-	u16			jvc_old_bits;
-	unsigned		count;
-	bool			first;
-	bool			toggle;
-};
-
-
-/**
- * get_decoder_data()	- gets decoder data
- * @input_dev:	input device
- *
- * Returns the struct decoder_data that corresponds to a device
- */
-static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
-{
-	struct decoder_data *data = NULL;
-
-	spin_lock(&decoder_lock);
-	list_for_each_entry(data, &decoder_list, list) {
-		if (data->ir_dev == ir_dev)
-			break;
-	}
-	spin_unlock(&decoder_lock);
-	return data;
-}
-
-static ssize_t store_enabled(struct device *d,
-			     struct device_attribute *mattr,
-			     const char *buf,
-			     size_t len)
-{
-	unsigned long value;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &value) || value > 1)
-		return -EINVAL;
-
-	data->enabled = value;
-
-	return len;
-}
-
-static ssize_t show_enabled(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (data->enabled)
-		return sprintf(buf, "1\n");
-	else
-	return sprintf(buf, "0\n");
-}
-
-static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
-
-static struct attribute *decoder_attributes[] = {
-	&dev_attr_enabled.attr,
-	NULL
-};
-
-static struct attribute_group decoder_attribute_group = {
-	.name	= "jvc_decoder",
-	.attrs	= decoder_attributes,
-};
-
 /**
  * ir_jvc_decode() - Decode one JVC pulse or space
  * @input_dev:	the struct input_dev descriptor of the device
@@ -128,14 +43,10 @@ static struct attribute_group decoder_attribute_group = {
  */
 static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
-	struct decoder_data *data;
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct jvc_dec *data = &ir_dev->raw->jvc;
 
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return -EINVAL;
-
-	if (!data->enabled)
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
 		return 0;
 
 	if (IS_RESET(ev)) {
@@ -188,9 +99,9 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (ev.pulse)
 			break;
 
-		data->jvc_bits <<= 1;
+		data->bits <<= 1;
 		if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
-			data->jvc_bits |= 1;
+			data->bits |= 1;
 			decrease_duration(&ev, JVC_BIT_1_SPACE);
 		} else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
 			decrease_duration(&ev, JVC_BIT_0_SPACE);
@@ -223,13 +134,13 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 
 		if (data->first) {
 			u32 scancode;
-			scancode = (bitrev8((data->jvc_bits >> 8) & 0xff) << 8) |
-				   (bitrev8((data->jvc_bits >> 0) & 0xff) << 0);
+			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
+				   (bitrev8((data->bits >> 0) & 0xff) << 0);
 			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
 			ir_keydown(input_dev, scancode, data->toggle);
 			data->first = false;
-			data->jvc_old_bits = data->jvc_bits;
-		} else if (data->jvc_bits == data->jvc_old_bits) {
+			data->old_bits = data->bits;
+		} else if (data->bits == data->old_bits) {
 			IR_dprintk(1, "JVC repeat\n");
 			ir_repeat(input_dev);
 		} else {
@@ -249,54 +160,9 @@ out:
 	return -EINVAL;
 }
 
-static int ir_jvc_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct decoder_data *data;
-	int rc;
-
-	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-	if (rc < 0)
-		return rc;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-		return -ENOMEM;
-	}
-
-	data->ir_dev = ir_dev;
-	data->enabled = 1;
-
-	spin_lock(&decoder_lock);
-	list_add_tail(&data->list, &decoder_list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
-static int ir_jvc_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	static struct decoder_data *data;
-
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return 0;
-
-	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-
-	spin_lock(&decoder_lock);
-	list_del(&data->list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
 static struct ir_raw_handler jvc_handler = {
+	.protocols	= IR_TYPE_JVC,
 	.decode		= ir_jvc_decode,
-	.raw_register	= ir_jvc_register,
-	.raw_unregister	= ir_jvc_unregister,
 };
 
 static int __init ir_jvc_decode_init(void)
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 9374a006f43..15a0f192d41 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -490,14 +490,16 @@ int __ir_input_register(struct input_dev *input_dev,
 	if (rc < 0)
 		goto out_table;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-		rc = ir_raw_event_register(input_dev);
-		if (rc < 0)
-			goto out_event;
-	}
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+			rc = ir_raw_event_register(input_dev);
+			if (rc < 0)
+				goto out_event;
+		}
 
-	IR_dprintk(1, "Registered input device on %s for %s remote.\n",
-		   driver_name, rc_tab->name);
+	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+		   driver_name, rc_tab->name,
+		   ir_dev->props->driver_type == RC_DRIVER_IR_RAW ? " in raw mode" : "");
 
 	return 0;
 
@@ -530,8 +532,10 @@ void ir_input_unregister(struct input_dev *input_dev)
 	IR_dprintk(1, "Freed keycode table\n");
 
 	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-		ir_raw_event_unregister(input_dev);
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+			ir_raw_event_unregister(input_dev);
+
 	rc_tab = &ir_dev->rc_tab;
 	rc_tab->size = 0;
 	kfree(rc_tab->scan);
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
new file mode 100644
index 00000000000..3ba482d96c4
--- /dev/null
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -0,0 +1,278 @@
+/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
+ *
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+#include <media/ir-core.h>
+#include "ir-core-priv.h"
+
+#define LIRCBUF_SIZE 256
+
+/**
+ * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
+ *		      lircd userspace daemon for decoding.
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @duration:	the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the lirc interfaces aren't wired up.
+ */
+static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+		return 0;
+
+	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+		return -EINVAL;
+
+	IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
+		   TO_US(ev.duration), TO_STR(ev.pulse));
+
+	ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+	if (ev.pulse)
+		ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+
+	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+			  (unsigned char *) &ir_dev->raw->lirc.lircdata);
+	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+
+	ir_dev->raw->lirc.lircdata = 0;
+
+	return 0;
+}
+
+static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
+				   size_t n, loff_t *ppos)
+{
+	struct lirc_codec *lirc;
+	struct ir_input_dev *ir_dev;
+	int *txbuf; /* buffer with values to transmit */
+	int ret = 0, count;
+
+	lirc = lirc_get_pdata(file);
+	if (!lirc)
+		return -EFAULT;
+
+	if (n % sizeof(int))
+		return -EINVAL;
+
+	count = n / sizeof(int);
+	if (count > LIRCBUF_SIZE || count % 2 == 0)
+		return -EINVAL;
+
+	txbuf = memdup_user(buf, n);
+	if (IS_ERR(txbuf))
+		return PTR_ERR(txbuf);
+
+	ir_dev = lirc->ir_dev;
+	if (!ir_dev) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (ir_dev->props && ir_dev->props->tx_ir)
+		ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+
+out:
+	kfree(txbuf);
+	return ret;
+}
+
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	struct lirc_codec *lirc;
+	struct ir_input_dev *ir_dev;
+	int ret = 0;
+	void *drv_data;
+	unsigned long val;
+
+	lirc = lirc_get_pdata(filep);
+	if (!lirc)
+		return -EFAULT;
+
+	ir_dev = lirc->ir_dev;
+	if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+		return -EFAULT;
+
+	drv_data = ir_dev->props->priv;
+
+	switch (cmd) {
+	case LIRC_SET_TRANSMITTER_MASK:
+		ret = get_user(val, (unsigned long *)arg);
+		if (ret)
+			return ret;
+
+		if (ir_dev->props && ir_dev->props->s_tx_mask)
+			ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
+		else
+			return -EINVAL;
+		break;
+
+	case LIRC_SET_SEND_CARRIER:
+		ret = get_user(val, (unsigned long *)arg);
+		if (ret)
+			return ret;
+
+		if (ir_dev->props && ir_dev->props->s_tx_carrier)
+			ir_dev->props->s_tx_carrier(drv_data, (u32)val);
+		else
+			return -EINVAL;
+		break;
+
+	case LIRC_GET_SEND_MODE:
+		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+		ret = put_user(val, (unsigned long *)arg);
+		break;
+
+	case LIRC_SET_SEND_MODE:
+		ret = get_user(val, (unsigned long *)arg);
+		if (ret)
+			return ret;
+
+		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+			return -EINVAL;
+		break;
+
+	default:
+		return lirc_dev_fop_ioctl(filep, cmd, arg);
+	}
+
+	return ret;
+}
+
+static int ir_lirc_open(void *data)
+{
+	return 0;
+}
+
+static void ir_lirc_close(void *data)
+{
+	return;
+}
+
+static struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ir_lirc_transmit_ir,
+	.unlocked_ioctl	= ir_lirc_ioctl,
+	.read		= lirc_dev_fop_read,
+	.poll		= lirc_dev_fop_poll,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+};
+
+static int ir_lirc_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct lirc_driver *drv;
+	struct lirc_buffer *rbuf;
+	int rc = -ENOMEM;
+	unsigned long features;
+
+	drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!drv)
+		return rc;
+
+	rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!rbuf)
+		goto rbuf_alloc_failed;
+
+	rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
+	if (rc)
+		goto rbuf_init_failed;
+
+	features = LIRC_CAN_REC_MODE2;
+	if (ir_dev->props->tx_ir) {
+		features |= LIRC_CAN_SEND_PULSE;
+		if (ir_dev->props->s_tx_mask)
+			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
+		if (ir_dev->props->s_tx_carrier)
+			features |= LIRC_CAN_SET_SEND_CARRIER;
+	}
+
+	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
+		 ir_dev->driver_name);
+	drv->minor = -1;
+	drv->features = features;
+	drv->data = &ir_dev->raw->lirc;
+	drv->rbuf = rbuf;
+	drv->set_use_inc = &ir_lirc_open;
+	drv->set_use_dec = &ir_lirc_close;
+	drv->code_length = sizeof(struct ir_raw_event) * 8;
+	drv->fops = &lirc_fops;
+	drv->dev = &ir_dev->dev;
+	drv->owner = THIS_MODULE;
+
+	drv->minor = lirc_register_driver(drv);
+	if (drv->minor < 0) {
+		rc = -ENODEV;
+		goto lirc_register_failed;
+	}
+
+	ir_dev->raw->lirc.drv = drv;
+	ir_dev->raw->lirc.ir_dev = ir_dev;
+	ir_dev->raw->lirc.lircdata = PULSE_MASK;
+
+	return 0;
+
+lirc_register_failed:
+rbuf_init_failed:
+	kfree(rbuf);
+rbuf_alloc_failed:
+	kfree(drv);
+
+	return rc;
+}
+
+static int ir_lirc_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+
+	lirc_unregister_driver(lirc->drv->minor);
+	lirc_buffer_free(lirc->drv->rbuf);
+	kfree(lirc->drv);
+
+	return 0;
+}
+
+static struct ir_raw_handler lirc_handler = {
+	.protocols	= IR_TYPE_LIRC,
+	.decode		= ir_lirc_decode,
+	.raw_register	= ir_lirc_register,
+	.raw_unregister	= ir_lirc_unregister,
+};
+
+static int __init ir_lirc_codec_init(void)
+{
+	ir_raw_handler_register(&lirc_handler);
+
+	printk(KERN_INFO "IR LIRC bridge handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_lirc_codec_exit(void)
+{
+	ir_raw_handler_unregister(&lirc_handler);
+}
+
+module_init(ir_lirc_codec_init);
+module_exit(ir_lirc_codec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("LIRC IR handler bridge");
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index ba79233112e..52e0f378ae3 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -27,10 +27,6 @@
 #define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
 #define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
 
-/* Used to register nec_decoder clients */
-static LIST_HEAD(decoder_list);
-static DEFINE_SPINLOCK(decoder_lock);
-
 enum nec_state {
 	STATE_INACTIVE,
 	STATE_HEADER_SPACE,
@@ -40,84 +36,6 @@ enum nec_state {
 	STATE_TRAILER_SPACE,
 };
 
-struct decoder_data {
-	struct list_head	list;
-	struct ir_input_dev	*ir_dev;
-	int			enabled:1;
-
-	/* State machine control */
-	enum nec_state		state;
-	u32			nec_bits;
-	unsigned		count;
-};
-
-
-/**
- * get_decoder_data()	- gets decoder data
- * @input_dev:	input device
- *
- * Returns the struct decoder_data that corresponds to a device
- */
-static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
-{
-	struct decoder_data *data = NULL;
-
-	spin_lock(&decoder_lock);
-	list_for_each_entry(data, &decoder_list, list) {
-		if (data->ir_dev == ir_dev)
-			break;
-	}
-	spin_unlock(&decoder_lock);
-	return data;
-}
-
-static ssize_t store_enabled(struct device *d,
-			     struct device_attribute *mattr,
-			     const char *buf,
-			     size_t len)
-{
-	unsigned long value;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &value) || value > 1)
-		return -EINVAL;
-
-	data->enabled = value;
-
-	return len;
-}
-
-static ssize_t show_enabled(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (data->enabled)
-		return sprintf(buf, "1\n");
-	else
-	return sprintf(buf, "0\n");
-}
-
-static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
-
-static struct attribute *decoder_attributes[] = {
-	&dev_attr_enabled.attr,
-	NULL
-};
-
-static struct attribute_group decoder_attribute_group = {
-	.name	= "nec_decoder",
-	.attrs	= decoder_attributes,
-};
-
 /**
  * ir_nec_decode() - Decode one NEC pulse or space
  * @input_dev:	the struct input_dev descriptor of the device
@@ -127,16 +45,12 @@ static struct attribute_group decoder_attribute_group = {
  */
 static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
-	struct decoder_data *data;
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct nec_dec *data = &ir_dev->raw->nec;
 	u32 scancode;
 	u8 address, not_address, command, not_command;
 
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return -EINVAL;
-
-	if (!data->enabled)
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
 		return 0;
 
 	if (IS_RESET(ev)) {
@@ -191,9 +105,9 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (ev.pulse)
 			break;
 
-		data->nec_bits <<= 1;
+		data->bits <<= 1;
 		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
-			data->nec_bits |= 1;
+			data->bits |= 1;
 		else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
 			break;
 		data->count++;
@@ -222,14 +136,14 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
 			break;
 
-		address     = bitrev8((data->nec_bits >> 24) & 0xff);
-		not_address = bitrev8((data->nec_bits >> 16) & 0xff);
-		command	    = bitrev8((data->nec_bits >>  8) & 0xff);
-		not_command = bitrev8((data->nec_bits >>  0) & 0xff);
+		address     = bitrev8((data->bits >> 24) & 0xff);
+		not_address = bitrev8((data->bits >> 16) & 0xff);
+		command	    = bitrev8((data->bits >>  8) & 0xff);
+		not_command = bitrev8((data->bits >>  0) & 0xff);
 
 		if ((command ^ not_command) != 0xff) {
 			IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
-				   data->nec_bits);
+				   data->bits);
 			break;
 		}
 
@@ -256,54 +170,9 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	return -EINVAL;
 }
 
-static int ir_nec_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct decoder_data *data;
-	int rc;
-
-	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-	if (rc < 0)
-		return rc;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-		return -ENOMEM;
-	}
-
-	data->ir_dev = ir_dev;
-	data->enabled = 1;
-
-	spin_lock(&decoder_lock);
-	list_add_tail(&data->list, &decoder_list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
-static int ir_nec_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	static struct decoder_data *data;
-
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return 0;
-
-	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-
-	spin_lock(&decoder_lock);
-	list_del(&data->list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
 static struct ir_raw_handler nec_handler = {
+	.protocols	= IR_TYPE_NEC,
 	.decode		= ir_nec_decode,
-	.raw_register	= ir_nec_register,
-	.raw_unregister	= ir_nec_unregister,
 };
 
 static int __init ir_nec_decode_init(void)
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index ea68a3f2eff..6f192ef31db 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -20,35 +20,13 @@
 /* Define the max number of pulse/space transitions to buffer */
 #define MAX_IR_EVENT_SIZE      512
 
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
 /* Used to handle IR raw handler extensions */
-static LIST_HEAD(ir_raw_handler_list);
 static DEFINE_SPINLOCK(ir_raw_handler_lock);
-
-/**
- * RUN_DECODER()	- runs an operation on all IR decoders
- * @ops:	IR raw handler operation to be called
- * @arg:	arguments to be passed to the callback
- *
- * Calls ir_raw_handler::ops for all registered IR handlers. It prevents
- * new decode addition/removal while running, by locking ir_raw_handler_lock
- * mutex. If an error occurs, it stops the ops. Otherwise, it returns a sum
- * of the return codes.
- */
-#define RUN_DECODER(ops, ...) ({					    \
-	struct ir_raw_handler		*_ir_raw_handler;		    \
-	int _sumrc = 0, _rc;						    \
-	spin_lock(&ir_raw_handler_lock);				    \
-	list_for_each_entry(_ir_raw_handler, &ir_raw_handler_list, list) {  \
-		if (_ir_raw_handler->ops) {				    \
-			_rc = _ir_raw_handler->ops(__VA_ARGS__);	    \
-			if (_rc < 0)					    \
-				break;					    \
-			_sumrc += _rc;					    \
-		}							    \
-	}								    \
-	spin_unlock(&ir_raw_handler_lock);				    \
-	_sumrc;								    \
-})
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
 
 #ifdef MODULE
 /* Used to load the decoders */
@@ -58,57 +36,17 @@ static struct work_struct wq_load;
 static void ir_raw_event_work(struct work_struct *work)
 {
 	struct ir_raw_event ev;
+	struct ir_raw_handler *handler;
 	struct ir_raw_event_ctrl *raw =
 		container_of(work, struct ir_raw_event_ctrl, rx_work);
 
-	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev))
-		RUN_DECODER(decode, raw->input_dev, ev);
-}
-
-int ir_raw_event_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	int rc;
-
-	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
-	if (!ir->raw)
-		return -ENOMEM;
-
-	ir->raw->input_dev = input_dev;
-	INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
-
-	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
-			 GFP_KERNEL);
-	if (rc < 0) {
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
-	}
-
-	rc = RUN_DECODER(raw_register, input_dev);
-	if (rc < 0) {
-		kfifo_free(&ir->raw->kfifo);
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
+	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+		spin_lock(&ir_raw_handler_lock);
+		list_for_each_entry(handler, &ir_raw_handler_list, list)
+			handler->decode(raw->input_dev, ev);
+		spin_unlock(&ir_raw_handler_lock);
+		raw->prev_ev = ev;
 	}
-
-	return rc;
-}
-
-void ir_raw_event_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
-	if (!ir->raw)
-		return;
-
-	cancel_work_sync(&ir->raw->rx_work);
-	RUN_DECODER(raw_unregister, input_dev);
-
-	kfifo_free(&ir->raw->kfifo);
-	kfree(ir->raw);
-	ir->raw = NULL;
 }
 
 /**
@@ -204,23 +142,103 @@ void ir_raw_event_handle(struct input_dev *input_dev)
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+	u64 protocols;
+	spin_lock(&ir_raw_handler_lock);
+	protocols = available_protocols;
+	spin_unlock(&ir_raw_handler_lock);
+	return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	int rc;
+	struct ir_raw_handler *handler;
+
+	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
+	if (!ir->raw)
+		return -ENOMEM;
+
+	ir->raw->input_dev = input_dev;
+	INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+	ir->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+			 GFP_KERNEL);
+	if (rc < 0) {
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return rc;
+	}
+
+	spin_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir->raw->list, &ir_raw_client_list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_register)
+			handler->raw_register(ir->raw->input_dev);
+	spin_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+
+void ir_raw_event_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_handler *handler;
+
+	if (!ir->raw)
+		return;
+
+	cancel_work_sync(&ir->raw->rx_work);
+
+	spin_lock(&ir_raw_handler_lock);
+	list_del(&ir->raw->list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_unregister)
+			handler->raw_unregister(ir->raw->input_dev);
+	spin_unlock(&ir_raw_handler_lock);
+
+	kfifo_free(&ir->raw->kfifo);
+	kfree(ir->raw);
+	ir->raw = NULL;
+}
+
 /*
  * Extension interface - used to register the IR decoders
  */
 
 int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
 {
+	struct ir_raw_event_ctrl *raw;
+
 	spin_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+	if (ir_raw_handler->raw_register)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_register(raw->input_dev);
+	available_protocols |= ir_raw_handler->protocols;
 	spin_unlock(&ir_raw_handler_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(ir_raw_handler_register);
 
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
 {
+	struct ir_raw_event_ctrl *raw;
+
 	spin_lock(&ir_raw_handler_lock);
 	list_del(&ir_raw_handler->list);
+	if (ir_raw_handler->raw_unregister)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_unregister(raw->input_dev);
+	available_protocols &= ~ir_raw_handler->protocols;
 	spin_unlock(&ir_raw_handler_lock);
 }
 EXPORT_SYMBOL(ir_raw_handler_unregister);
@@ -235,6 +253,7 @@ static void init_decoders(struct work_struct *work)
 	load_rc6_decode();
 	load_jvc_decode();
 	load_sony_decode();
+	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
 	   it is needed to change the CONFIG_MODULE test at ir-core.h
diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/IR/ir-rc5-decoder.c
index 23cdb1b1a3b..df4770d978a 100644
--- a/drivers/media/IR/ir-rc5-decoder.c
+++ b/drivers/media/IR/ir-rc5-decoder.c
@@ -30,10 +30,6 @@
 #define RC5_BIT_END		(1 * RC5_UNIT)
 #define RC5X_SPACE		(4 * RC5_UNIT)
 
-/* Used to register rc5_decoder clients */
-static LIST_HEAD(decoder_list);
-static DEFINE_SPINLOCK(decoder_lock);
-
 enum rc5_state {
 	STATE_INACTIVE,
 	STATE_BIT_START,
@@ -42,87 +38,6 @@ enum rc5_state {
 	STATE_FINISHED,
 };
 
-struct decoder_data {
-	struct list_head	list;
-	struct ir_input_dev	*ir_dev;
-	int			enabled:1;
-
-	/* State machine control */
-	enum rc5_state		state;
-	u32			rc5_bits;
-	struct ir_raw_event	prev_ev;
-	unsigned		count;
-	unsigned		wanted_bits;
-};
-
-
-/**
- * get_decoder_data()	- gets decoder data
- * @input_dev:	input device
- *
- * Returns the struct decoder_data that corresponds to a device
- */
-
-static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
-{
-	struct decoder_data *data = NULL;
-
-	spin_lock(&decoder_lock);
-	list_for_each_entry(data, &decoder_list, list) {
-		if (data->ir_dev == ir_dev)
-			break;
-	}
-	spin_unlock(&decoder_lock);
-	return data;
-}
-
-static ssize_t store_enabled(struct device *d,
-			     struct device_attribute *mattr,
-			     const char *buf,
-			     size_t len)
-{
-	unsigned long value;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &value) || value > 1)
-		return -EINVAL;
-
-	data->enabled = value;
-
-	return len;
-}
-
-static ssize_t show_enabled(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (data->enabled)
-		return sprintf(buf, "1\n");
-	else
-	return sprintf(buf, "0\n");
-}
-
-static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
-
-static struct attribute *decoder_attributes[] = {
-	&dev_attr_enabled.attr,
-	NULL
-};
-
-static struct attribute_group decoder_attribute_group = {
-	.name	= "rc5_decoder",
-	.attrs	= decoder_attributes,
-};
-
 /**
  * ir_rc5_decode() - Decode one RC-5 pulse or space
  * @input_dev:	the struct input_dev descriptor of the device
@@ -132,17 +47,13 @@ static struct attribute_group decoder_attribute_group = {
  */
 static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
-	struct decoder_data *data;
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct rc5_dec *data = &ir_dev->raw->rc5;
 	u8 toggle;
 	u32 scancode;
 
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return -EINVAL;
-
-	if (!data->enabled)
-		return 0;
+        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+                return 0;
 
 	if (IS_RESET(ev)) {
 		data->state = STATE_INACTIVE;
@@ -176,16 +87,15 @@ again:
 		if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
 			break;
 
-		data->rc5_bits <<= 1;
+		data->bits <<= 1;
 		if (!ev.pulse)
-			data->rc5_bits |= 1;
+			data->bits |= 1;
 		data->count++;
-		data->prev_ev = ev;
 		data->state = STATE_BIT_END;
 		return 0;
 
 	case STATE_BIT_END:
-		if (!is_transition(&ev, &data->prev_ev))
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -217,11 +127,11 @@ again:
 		if (data->wanted_bits == RC5X_NBITS) {
 			/* RC5X */
 			u8 xdata, command, system;
-			xdata    = (data->rc5_bits & 0x0003F) >> 0;
-			command  = (data->rc5_bits & 0x00FC0) >> 6;
-			system   = (data->rc5_bits & 0x1F000) >> 12;
-			toggle   = (data->rc5_bits & 0x20000) ? 1 : 0;
-			command += (data->rc5_bits & 0x01000) ? 0 : 0x40;
+			xdata    = (data->bits & 0x0003F) >> 0;
+			command  = (data->bits & 0x00FC0) >> 6;
+			system   = (data->bits & 0x1F000) >> 12;
+			toggle   = (data->bits & 0x20000) ? 1 : 0;
+			command += (data->bits & 0x01000) ? 0 : 0x40;
 			scancode = system << 16 | command << 8 | xdata;
 
 			IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
@@ -230,10 +140,10 @@ again:
 		} else {
 			/* RC5 */
 			u8 command, system;
-			command  = (data->rc5_bits & 0x0003F) >> 0;
-			system   = (data->rc5_bits & 0x007C0) >> 6;
-			toggle   = (data->rc5_bits & 0x00800) ? 1 : 0;
-			command += (data->rc5_bits & 0x01000) ? 0 : 0x40;
+			command  = (data->bits & 0x0003F) >> 0;
+			system   = (data->bits & 0x007C0) >> 6;
+			toggle   = (data->bits & 0x00800) ? 1 : 0;
+			command += (data->bits & 0x01000) ? 0 : 0x40;
 			scancode = system << 8 | command;
 
 			IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
@@ -252,54 +162,9 @@ out:
 	return -EINVAL;
 }
 
-static int ir_rc5_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct decoder_data *data;
-	int rc;
-
-	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-	if (rc < 0)
-		return rc;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-		return -ENOMEM;
-	}
-
-	data->ir_dev = ir_dev;
-	data->enabled = 1;
-
-	spin_lock(&decoder_lock);
-	list_add_tail(&data->list, &decoder_list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
-static int ir_rc5_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	static struct decoder_data *data;
-
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return 0;
-
-	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-
-	spin_lock(&decoder_lock);
-	list_del(&data->list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
 static struct ir_raw_handler rc5_handler = {
+	.protocols	= IR_TYPE_RC5,
 	.decode		= ir_rc5_decode,
-	.raw_register	= ir_rc5_register,
-	.raw_unregister	= ir_rc5_unregister,
 };
 
 static int __init ir_rc5_decode_init(void)
diff --git a/drivers/media/IR/ir-rc6-decoder.c b/drivers/media/IR/ir-rc6-decoder.c
index 2bf479f4f1b..f1624b8279b 100644
--- a/drivers/media/IR/ir-rc6-decoder.c
+++ b/drivers/media/IR/ir-rc6-decoder.c
@@ -36,10 +36,6 @@
 #define RC6_STARTBIT_MASK	0x08	/* for the header bits */
 #define RC6_6A_MCE_TOGGLE_MASK	0x8000	/* for the body bits */
 
-/* Used to register rc6_decoder clients */
-static LIST_HEAD(decoder_list);
-static DEFINE_SPINLOCK(decoder_lock);
-
 enum rc6_mode {
 	RC6_MODE_0,
 	RC6_MODE_6A,
@@ -58,89 +54,8 @@ enum rc6_state {
 	STATE_FINISHED,
 };
 
-struct decoder_data {
-	struct list_head	list;
-	struct ir_input_dev	*ir_dev;
-	int			enabled:1;
-
-	/* State machine control */
-	enum rc6_state		state;
-	u8			header;
-	u32			body;
-	struct ir_raw_event	prev_ev;
-	bool			toggle;
-	unsigned		count;
-	unsigned		wanted_bits;
-};
-
-
-/**
- * get_decoder_data()	- gets decoder data
- * @input_dev:	input device
- *
- * Returns the struct decoder_data that corresponds to a device
- */
-static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
-{
-	struct decoder_data *data = NULL;
-
-	spin_lock(&decoder_lock);
-	list_for_each_entry(data, &decoder_list, list) {
-		if (data->ir_dev == ir_dev)
-			break;
-	}
-	spin_unlock(&decoder_lock);
-	return data;
-}
-
-static ssize_t store_enabled(struct device *d,
-			     struct device_attribute *mattr,
-			     const char *buf,
-			     size_t len)
+static enum rc6_mode rc6_mode(struct rc6_dec *data)
 {
-	unsigned long value;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &value) || value > 1)
-		return -EINVAL;
-
-	data->enabled = value;
-
-	return len;
-}
-
-static ssize_t show_enabled(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (data->enabled)
-		return sprintf(buf, "1\n");
-	else
-	return sprintf(buf, "0\n");
-}
-
-static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
-
-static struct attribute *decoder_attributes[] = {
-	&dev_attr_enabled.attr,
-	NULL
-};
-
-static struct attribute_group decoder_attribute_group = {
-	.name	= "rc6_decoder",
-	.attrs	= decoder_attributes,
-};
-
-static enum rc6_mode rc6_mode(struct decoder_data *data) {
 	switch (data->header & RC6_MODE_MASK) {
 	case 0:
 		return RC6_MODE_0;
@@ -162,16 +77,12 @@ static enum rc6_mode rc6_mode(struct decoder_data *data) {
  */
 static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
-	struct decoder_data *data;
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct rc6_dec *data = &ir_dev->raw->rc6;
 	u32 scancode;
 	u8 toggle;
 
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return -EINVAL;
-
-	if (!data->enabled)
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
 		return 0;
 
 	if (IS_RESET(ev)) {
@@ -223,12 +134,11 @@ again:
 		if (ev.pulse)
 			data->header |= 1;
 		data->count++;
-		data->prev_ev = ev;
 		data->state = STATE_HEADER_BIT_END;
 		return 0;
 
 	case STATE_HEADER_BIT_END:
-		if (!is_transition(&ev, &data->prev_ev))
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
 			break;
 
 		if (data->count == RC6_HEADER_NBITS)
@@ -244,12 +154,11 @@ again:
 			break;
 
 		data->toggle = ev.pulse;
-		data->prev_ev = ev;
 		data->state = STATE_TOGGLE_END;
 		return 0;
 
 	case STATE_TOGGLE_END:
-		if (!is_transition(&ev, &data->prev_ev) ||
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
 		    !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
 			break;
 
@@ -259,7 +168,6 @@ again:
 		}
 
 		data->state = STATE_BODY_BIT_START;
-		data->prev_ev = ev;
 		decrease_duration(&ev, RC6_TOGGLE_END);
 		data->count = 0;
 
@@ -291,13 +199,11 @@ again:
 		if (ev.pulse)
 			data->body |= 1;
 		data->count++;
-		data->prev_ev = ev;
-
 		data->state = STATE_BODY_BIT_END;
 		return 0;
 
 	case STATE_BODY_BIT_END:
-		if (!is_transition(&ev, &data->prev_ev))
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -348,54 +254,9 @@ out:
 	return -EINVAL;
 }
 
-static int ir_rc6_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct decoder_data *data;
-	int rc;
-
-	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-	if (rc < 0)
-		return rc;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-		return -ENOMEM;
-	}
-
-	data->ir_dev = ir_dev;
-	data->enabled = 1;
-
-	spin_lock(&decoder_lock);
-	list_add_tail(&data->list, &decoder_list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
-static int ir_rc6_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	static struct decoder_data *data;
-
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return 0;
-
-	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-
-	spin_lock(&decoder_lock);
-	list_del(&data->list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
 static struct ir_raw_handler rc6_handler = {
+	.protocols	= IR_TYPE_RC6,
 	.decode		= ir_rc6_decode,
-	.raw_register	= ir_rc6_register,
-	.raw_unregister	= ir_rc6_unregister,
 };
 
 static int __init ir_rc6_decode_init(void)
diff --git a/drivers/media/IR/ir-sony-decoder.c b/drivers/media/IR/ir-sony-decoder.c
index 9f440c5c060..b9074f07c7a 100644
--- a/drivers/media/IR/ir-sony-decoder.c
+++ b/drivers/media/IR/ir-sony-decoder.c
@@ -23,10 +23,6 @@
 #define SONY_BIT_SPACE		(1 * SONY_UNIT)
 #define SONY_TRAILER_SPACE	(10 * SONY_UNIT) /* minimum */
 
-/* Used to register sony_decoder clients */
-static LIST_HEAD(decoder_list);
-static DEFINE_SPINLOCK(decoder_lock);
-
 enum sony_state {
 	STATE_INACTIVE,
 	STATE_HEADER_SPACE,
@@ -35,84 +31,6 @@ enum sony_state {
 	STATE_FINISHED,
 };
 
-struct decoder_data {
-	struct list_head	list;
-	struct ir_input_dev	*ir_dev;
-	int			enabled:1;
-
-	/* State machine control */
-	enum sony_state		state;
-	u32			sony_bits;
-	unsigned		count;
-};
-
-
-/**
- * get_decoder_data()	- gets decoder data
- * @input_dev:	input device
- *
- * Returns the struct decoder_data that corresponds to a device
- */
-static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
-{
-	struct decoder_data *data = NULL;
-
-	spin_lock(&decoder_lock);
-	list_for_each_entry(data, &decoder_list, list) {
-		if (data->ir_dev == ir_dev)
-			break;
-	}
-	spin_unlock(&decoder_lock);
-	return data;
-}
-
-static ssize_t store_enabled(struct device *d,
-			     struct device_attribute *mattr,
-			     const char *buf,
-			     size_t len)
-{
-	unsigned long value;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &value) || value > 1)
-		return -EINVAL;
-
-	data->enabled = value;
-
-	return len;
-}
-
-static ssize_t show_enabled(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	struct decoder_data *data = get_decoder_data(ir_dev);
-
-	if (!data)
-		return -EINVAL;
-
-	if (data->enabled)
-		return sprintf(buf, "1\n");
-	else
-	return sprintf(buf, "0\n");
-}
-
-static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
-
-static struct attribute *decoder_attributes[] = {
-	&dev_attr_enabled.attr,
-	NULL
-};
-
-static struct attribute_group decoder_attribute_group = {
-	.name	= "sony_decoder",
-	.attrs	= decoder_attributes,
-};
-
 /**
  * ir_sony_decode() - Decode one Sony pulse or space
  * @input_dev:	the struct input_dev descriptor of the device
@@ -122,16 +40,12 @@ static struct attribute_group decoder_attribute_group = {
  */
 static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
-	struct decoder_data *data;
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct sony_dec *data = &ir_dev->raw->sony;
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return -EINVAL;
-
-	if (!data->enabled)
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
 		return 0;
 
 	if (IS_RESET(ev)) {
@@ -172,9 +86,9 @@ static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (!ev.pulse)
 			break;
 
-		data->sony_bits <<= 1;
+		data->bits <<= 1;
 		if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
-			data->sony_bits |= 1;
+			data->bits |= 1;
 		else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
 			break;
 
@@ -208,19 +122,19 @@ static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 
 		switch (data->count) {
 		case 12:
-			device    = bitrev8((data->sony_bits <<  3) & 0xF8);
+			device    = bitrev8((data->bits <<  3) & 0xF8);
 			subdevice = 0;
-			function  = bitrev8((data->sony_bits >>  4) & 0xFE);
+			function  = bitrev8((data->bits >>  4) & 0xFE);
 			break;
 		case 15:
-			device    = bitrev8((data->sony_bits >>  0) & 0xFF);
+			device    = bitrev8((data->bits >>  0) & 0xFF);
 			subdevice = 0;
-			function  = bitrev8((data->sony_bits >>  7) & 0xFD);
+			function  = bitrev8((data->bits >>  7) & 0xFD);
 			break;
 		case 20:
-			device    = bitrev8((data->sony_bits >>  5) & 0xF8);
-			subdevice = bitrev8((data->sony_bits >>  0) & 0xFF);
-			function  = bitrev8((data->sony_bits >> 12) & 0xFE);
+			device    = bitrev8((data->bits >>  5) & 0xF8);
+			subdevice = bitrev8((data->bits >>  0) & 0xFF);
+			function  = bitrev8((data->bits >> 12) & 0xFE);
 			break;
 		default:
 			IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
@@ -241,54 +155,9 @@ out:
 	return -EINVAL;
 }
 
-static int ir_sony_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct decoder_data *data;
-	int rc;
-
-	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-	if (rc < 0)
-		return rc;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-		return -ENOMEM;
-	}
-
-	data->ir_dev = ir_dev;
-	data->enabled = 1;
-
-	spin_lock(&decoder_lock);
-	list_add_tail(&data->list, &decoder_list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
-static int ir_sony_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	static struct decoder_data *data;
-
-	data = get_decoder_data(ir_dev);
-	if (!data)
-		return 0;
-
-	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
-
-	spin_lock(&decoder_lock);
-	list_del(&data->list);
-	spin_unlock(&decoder_lock);
-
-	return 0;
-}
-
 static struct ir_raw_handler sony_handler = {
+	.protocols	= IR_TYPE_SONY,
 	.decode		= ir_sony_decode,
-	.raw_register	= ir_sony_register,
-	.raw_unregister	= ir_sony_unregister,
 };
 
 static int __init ir_sony_decode_init(void)
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index d7da63e16c9..6273047e915 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -33,125 +33,172 @@ static struct class ir_input_class = {
 	.devnode	= ir_devnode,
 };
 
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ IR_TYPE_UNKNOWN,	"unknown"	},
+	{ IR_TYPE_RC5,		"rc-5"		},
+	{ IR_TYPE_NEC,		"nec"		},
+	{ IR_TYPE_RC6,		"rc-6"		},
+	{ IR_TYPE_JVC,		"jvc"		},
+	{ IR_TYPE_SONY,		"sony"		},
+	{ IR_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
 /**
- * show_protocol() - shows the current IR protocol
+ * show_protocols() - shows the current IR protocol(s)
  * @d:		the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the output buffer
  *
- * This routine is a callback routine for input read the IR protocol type.
- * it is trigged by reading /sys/class/rc/rc?/current_protocol.
- * It returns the protocol name, as understood by the driver.
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
  */
-static ssize_t show_protocol(struct device *d,
-			     struct device_attribute *mattr, char *buf)
+static ssize_t show_protocols(struct device *d,
+			      struct device_attribute *mattr, char *buf)
 {
-	char *s;
 	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 ir_type = ir_dev->rc_tab.ir_type;
-
-	IR_dprintk(1, "Current protocol is %lld\n", (long long)ir_type);
-
-	/* FIXME: doesn't support multiple protocols at the same time */
-	if (ir_type == IR_TYPE_UNKNOWN)
-		s = "Unknown";
-	else if (ir_type == IR_TYPE_RC5)
-		s = "rc-5";
-	else if (ir_type == IR_TYPE_NEC)
-		s = "nec";
-	else if (ir_type == IR_TYPE_RC6)
-		s = "rc6";
-	else if (ir_type == IR_TYPE_JVC)
-		s = "jvc";
-	else if (ir_type == IR_TYPE_SONY)
-		s = "sony";
-	else
-		s = "other";
+	u64 allowed, enabled;
+	char *tmp = buf;
+	int i;
+
+	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = ir_dev->rc_tab.ir_type;
+		allowed = ir_dev->props->allowed_protos;
+	} else {
+		enabled = ir_dev->raw->enabled_protocols;
+		allowed = ir_raw_get_allowed_protocols();
+	}
+
+	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+		   (long long)allowed,
+		   (long long)enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
 
-	return sprintf(buf, "%s\n", s);
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+	return tmp + 1 - buf;
 }
 
 /**
- * store_protocol() - shows the current IR protocol
+ * store_protocols() - changes the current IR protocol(s)
  * @d:		the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the input buffer
  * @len:	length of the input buffer
  *
  * This routine is a callback routine for changing the IR protocol type.
- * it is trigged by reading /sys/class/rc/rc?/current_protocol.
- * It changes the IR the protocol name, if the IR type is recognized
- * by the driver.
- * If an unknown protocol name is used, returns -EINVAL.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
  */
-static ssize_t store_protocol(struct device *d,
-			      struct device_attribute *mattr,
-			      const char *data,
-			      size_t len)
+static ssize_t store_protocols(struct device *d,
+			       struct device_attribute *mattr,
+			       const char *data,
+			       size_t len)
 {
 	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 ir_type = 0;
-	int rc = -EINVAL;
+	bool enable, disable;
+	const char *tmp;
+	u64 type;
+	u64 mask;
+	int rc, i, count = 0;
 	unsigned long flags;
-	char *buf;
-
-	while ((buf = strsep((char **) &data, " \n")) != NULL) {
-		if (!strcasecmp(buf, "rc-5") || !strcasecmp(buf, "rc5"))
-			ir_type |= IR_TYPE_RC5;
-		if (!strcasecmp(buf, "nec"))
-			ir_type |= IR_TYPE_NEC;
-		if (!strcasecmp(buf, "jvc"))
-			ir_type |= IR_TYPE_JVC;
-		if (!strcasecmp(buf, "sony"))
-			ir_type |= IR_TYPE_SONY;
+
+	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+		type = ir_dev->rc_tab.ir_type;
+	else
+		type = ir_dev->raw->enabled_protocols;
+
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
+
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
 	}
 
-	if (!ir_type) {
-		IR_dprintk(1, "Unknown protocol\n");
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
 		return -EINVAL;
 	}
 
-	if (ir_dev->props && ir_dev->props->change_protocol)
+	if (ir_dev->props && ir_dev->props->change_protocol) {
 		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    ir_type);
-
-	if (rc < 0) {
-		IR_dprintk(1, "Error setting protocol to %lld\n",
-			   (long long)ir_type);
-		return -EINVAL;
+						    type);
+		if (rc < 0) {
+			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+				   (long long)type);
+			return -EINVAL;
+		}
 	}
 
-	spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-	ir_dev->rc_tab.ir_type = ir_type;
-	spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+		ir_dev->rc_tab.ir_type = type;
+		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	} else {
+		ir_dev->raw->enabled_protocols = type;
+	}
 
-	IR_dprintk(1, "Current protocol(s) is(are) %lld\n",
-		   (long long)ir_type);
+	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+		   (long long)type);
 
 	return len;
 }
 
-static ssize_t show_supported_protocols(struct device *d,
-			     struct device_attribute *mattr, char *buf)
-{
-	char *orgbuf = buf;
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-
-	/* FIXME: doesn't support multiple protocols at the same time */
-	if (ir_dev->props->allowed_protos == IR_TYPE_UNKNOWN)
-		buf += sprintf(buf, "unknown ");
-	if (ir_dev->props->allowed_protos & IR_TYPE_RC5)
-		buf += sprintf(buf, "rc-5 ");
-	if (ir_dev->props->allowed_protos & IR_TYPE_NEC)
-		buf += sprintf(buf, "nec ");
-	if (buf == orgbuf)
-		buf += sprintf(buf, "other ");
-
-	buf += sprintf(buf - 1, "\n");
-
-	return buf - orgbuf;
-}
-
 #define ADD_HOTPLUG_VAR(fmt, val...)					\
 	do {								\
 		int err = add_uevent_var(env, fmt, val);		\
@@ -159,7 +206,7 @@ static ssize_t show_supported_protocols(struct device *d,
 			return err;					\
 	} while (0)
 
-static int ir_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 {
 	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
 
@@ -174,34 +221,26 @@ static int ir_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 /*
  * Static device attribute struct with the sysfs attributes for IR's
  */
-static DEVICE_ATTR(protocol, S_IRUGO | S_IWUSR,
-		   show_protocol, store_protocol);
-
-static DEVICE_ATTR(supported_protocols, S_IRUGO | S_IWUSR,
-		   show_supported_protocols, NULL);
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+		   show_protocols, store_protocols);
 
-static struct attribute *ir_hw_dev_attrs[] = {
-	&dev_attr_protocol.attr,
-	&dev_attr_supported_protocols.attr,
+static struct attribute *rc_dev_attrs[] = {
+	&dev_attr_protocols.attr,
 	NULL,
 };
 
-static struct attribute_group ir_hw_dev_attr_grp = {
-	.attrs	= ir_hw_dev_attrs,
+static struct attribute_group rc_dev_attr_grp = {
+	.attrs	= rc_dev_attrs,
 };
 
-static const struct attribute_group *ir_hw_dev_attr_groups[] = {
-	&ir_hw_dev_attr_grp,
+static const struct attribute_group *rc_dev_attr_groups[] = {
+	&rc_dev_attr_grp,
 	NULL
 };
 
 static struct device_type rc_dev_type = {
-	.groups		= ir_hw_dev_attr_groups,
-	.uevent		= ir_dev_uevent,
-};
-
-static struct device_type ir_raw_dev_type = {
-	.uevent		= ir_dev_uevent,
+	.groups		= rc_dev_attr_groups,
+	.uevent		= rc_dev_uevent,
 };
 
 /**
@@ -221,10 +260,7 @@ int ir_register_class(struct input_dev *input_dev)
 	if (unlikely(devno < 0))
 		return devno;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		ir_dev->dev.type = &rc_dev_type;
-	else
-		ir_dev->dev.type = &ir_raw_dev_type;
+	ir_dev->dev.type = &rc_dev_type;
 
 	ir_dev->dev.class = &ir_input_class;
 	ir_dev->dev.parent = input_dev->dev.parent;
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index ec25258a955..cbee06243b5 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -6,13 +6,16 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-avermedia.o \
 			rc-avermedia-cardbus.o \
 			rc-avermedia-dvbt.o \
-			rc-avermedia-m135a-rm-jx.o \
+			rc-avermedia-m135a.o \
+			rc-avermedia-m733a-rm-k6.o \
 			rc-avertv-303.o \
 			rc-behold.o \
 			rc-behold-columbus.o \
 			rc-budget-ci-old.o \
 			rc-cinergy-1400.o \
 			rc-cinergy.o \
+			rc-dib0700-nec.o \
+			rc-dib0700-rc5.o \
 			rc-dm1105-nec.o \
 			rc-dntv-live-dvb-t.o \
 			rc-dntv-live-dvbt-pro.o \
@@ -36,6 +39,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-kaiomy.o \
 			rc-kworld-315u.o \
 			rc-kworld-plus-tv-analog.o \
+			rc-lirc.o \
 			rc-manli.o \
 			rc-msi-tvanywhere.o \
 			rc-msi-tvanywhere-plus.o \
@@ -56,6 +60,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-pv951.o \
 			rc-rc5-hauppauge-new.o \
 			rc-rc5-tv.o \
+			rc-rc6-mce.o \
 			rc-real-audio-220-32-keys.o \
 			rc-tbs-nec.o \
 			rc-terratec-cinergy-xs.o \
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c b/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
deleted file mode 100644
index 101e7ea8594..00000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* avermedia-m135a-rm-jx.h - Keytable for avermedia_m135a_rm_jx Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M135A with IR model RM-JX
- * The same codes exist on both Positivo (BR) and original IR
- * Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode avermedia_m135a_rm_jx[] = {
-	{ 0x0200, KEY_POWER2 },
-	{ 0x022e, KEY_DOT },		/* '.' */
-	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
-
-	{ 0x0205, KEY_1 },
-	{ 0x0206, KEY_2 },
-	{ 0x0207, KEY_3 },
-	{ 0x0209, KEY_4 },
-	{ 0x020a, KEY_5 },
-	{ 0x020b, KEY_6 },
-	{ 0x020d, KEY_7 },
-	{ 0x020e, KEY_8 },
-	{ 0x020f, KEY_9 },
-	{ 0x0211, KEY_0 },
-
-	{ 0x0213, KEY_RIGHT },		/* -> or L */
-	{ 0x0212, KEY_LEFT },		/* <- or R */
-
-	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
-	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
-
-	{ 0x0303, KEY_CHANNELUP },
-	{ 0x0302, KEY_CHANNELDOWN },
-	{ 0x021f, KEY_VOLUMEUP },
-	{ 0x021e, KEY_VOLUMEDOWN },
-	{ 0x020c, KEY_ENTER },		/* Full Screen */
-
-	{ 0x0214, KEY_MUTE },
-	{ 0x0208, KEY_AUDIO },
-
-	{ 0x0203, KEY_TEXT },		/* Teletext */
-	{ 0x0204, KEY_EPG },
-	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
-
-	{ 0x021d, KEY_RED },
-	{ 0x021c, KEY_YELLOW },
-	{ 0x0301, KEY_GREEN },
-	{ 0x0300, KEY_BLUE },
-
-	{ 0x021a, KEY_PLAYPAUSE },
-	{ 0x0219, KEY_RECORD },
-	{ 0x0218, KEY_PLAY },
-	{ 0x021b, KEY_STOP },
-};
-
-static struct rc_keymap avermedia_m135a_rm_jx_map = {
-	.map = {
-		.scan    = avermedia_m135a_rm_jx,
-		.size    = ARRAY_SIZE(avermedia_m135a_rm_jx),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AVERMEDIA_M135A_RM_JX,
-	}
-};
-
-static int __init init_rc_map_avermedia_m135a_rm_jx(void)
-{
-	return ir_register_map(&avermedia_m135a_rm_jx_map);
-}
-
-static void __exit exit_rc_map_avermedia_m135a_rm_jx(void)
-{
-	ir_unregister_map(&avermedia_m135a_rm_jx_map);
-}
-
-module_init(init_rc_map_avermedia_m135a_rm_jx)
-module_exit(exit_rc_map_avermedia_m135a_rm_jx)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a.c b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
new file mode 100644
index 00000000000..e4471fb2ad1
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
@@ -0,0 +1,147 @@
+/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M135A with RM-JX and RM-K6 remote controls
+ *
+ * On Avermedia M135A with IR model RM-JX, the same codes exist on both
+ * Positivo (BR) and original IR, initial version and remote control codes
+ * added by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Positivo also ships Avermedia M135A with model RM-K6, extra control
+ * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m135a[] = {
+	/* RM-JX */
+	{ 0x0200, KEY_POWER2 },
+	{ 0x022e, KEY_DOT },		/* '.' */
+	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
+
+	{ 0x0205, KEY_1 },
+	{ 0x0206, KEY_2 },
+	{ 0x0207, KEY_3 },
+	{ 0x0209, KEY_4 },
+	{ 0x020a, KEY_5 },
+	{ 0x020b, KEY_6 },
+	{ 0x020d, KEY_7 },
+	{ 0x020e, KEY_8 },
+	{ 0x020f, KEY_9 },
+	{ 0x0211, KEY_0 },
+
+	{ 0x0213, KEY_RIGHT },		/* -> or L */
+	{ 0x0212, KEY_LEFT },		/* <- or R */
+
+	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
+	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
+
+	{ 0x0303, KEY_CHANNELUP },
+	{ 0x0302, KEY_CHANNELDOWN },
+	{ 0x021f, KEY_VOLUMEUP },
+	{ 0x021e, KEY_VOLUMEDOWN },
+	{ 0x020c, KEY_ENTER },		/* Full Screen */
+
+	{ 0x0214, KEY_MUTE },
+	{ 0x0208, KEY_AUDIO },
+
+	{ 0x0203, KEY_TEXT },		/* Teletext */
+	{ 0x0204, KEY_EPG },
+	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
+
+	{ 0x021d, KEY_RED },
+	{ 0x021c, KEY_YELLOW },
+	{ 0x0301, KEY_GREEN },
+	{ 0x0300, KEY_BLUE },
+
+	{ 0x021a, KEY_PLAYPAUSE },
+	{ 0x0219, KEY_RECORD },
+	{ 0x0218, KEY_PLAY },
+	{ 0x021b, KEY_STOP },
+
+	/* RM-K6 */
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m135a_map = {
+	.map = {
+		.scan    = avermedia_m135a,
+		.size    = ARRAY_SIZE(avermedia_m135a),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M135A,
+	}
+};
+
+static int __init init_rc_map_avermedia_m135a(void)
+{
+	return ir_register_map(&avermedia_m135a_map);
+}
+
+static void __exit exit_rc_map_avermedia_m135a(void)
+{
+	ir_unregister_map(&avermedia_m135a_map);
+}
+
+module_init(init_rc_map_avermedia_m135a)
+module_exit(exit_rc_map_avermedia_m135a)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
new file mode 100644
index 00000000000..cf8d45717cb
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -0,0 +1,95 @@
+/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
+ *
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M733A with IR model RM-K6
+ * This is the stock remote controller used with Positivo machines with M733A
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m733a_rm_k6[] = {
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m733a_rm_k6_map = {
+	.map = {
+		.scan    = avermedia_m733a_rm_k6,
+		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
+	}
+};
+
+static int __init init_rc_map_avermedia_m733a_rm_k6(void)
+{
+	return ir_register_map(&avermedia_m733a_rm_k6_map);
+}
+
+static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
+{
+	ir_unregister_map(&avermedia_m733a_rm_k6_map);
+}
+
+module_init(init_rc_map_avermedia_m733a_rm_k6)
+module_exit(exit_rc_map_avermedia_m733a_rm_k6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dib0700-nec.c b/drivers/media/IR/keymaps/rc-dib0700-nec.c
new file mode 100644
index 00000000000..ae1832038fb
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-dib0700-nec.c
@@ -0,0 +1,124 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_nec_table[] = {
+	/* Key codes for the Pixelview SBTVD remote */
+	{ 0x8613, KEY_MUTE },
+	{ 0x8612, KEY_POWER },
+	{ 0x8601, KEY_1 },
+	{ 0x8602, KEY_2 },
+	{ 0x8603, KEY_3 },
+	{ 0x8604, KEY_4 },
+	{ 0x8605, KEY_5 },
+	{ 0x8606, KEY_6 },
+	{ 0x8607, KEY_7 },
+	{ 0x8608, KEY_8 },
+	{ 0x8609, KEY_9 },
+	{ 0x8600, KEY_0 },
+	{ 0x860d, KEY_CHANNELUP },
+	{ 0x8619, KEY_CHANNELDOWN },
+	{ 0x8610, KEY_VOLUMEUP },
+	{ 0x860c, KEY_VOLUMEDOWN },
+
+	{ 0x860a, KEY_CAMERA },
+	{ 0x860b, KEY_ZOOM },
+	{ 0x861b, KEY_BACKSPACE },
+	{ 0x8615, KEY_ENTER },
+
+	{ 0x861d, KEY_UP },
+	{ 0x861e, KEY_DOWN },
+	{ 0x860e, KEY_LEFT },
+	{ 0x860f, KEY_RIGHT },
+
+	{ 0x8618, KEY_RECORD },
+	{ 0x861a, KEY_STOP },
+
+	/* Key codes for the EvolutePC TVWay+ remote */
+	{ 0x7a00, KEY_MENU },
+	{ 0x7a01, KEY_RECORD },
+	{ 0x7a02, KEY_PLAY },
+	{ 0x7a03, KEY_STOP },
+	{ 0x7a10, KEY_CHANNELUP },
+	{ 0x7a11, KEY_CHANNELDOWN },
+	{ 0x7a12, KEY_VOLUMEUP },
+	{ 0x7a13, KEY_VOLUMEDOWN },
+	{ 0x7a40, KEY_POWER },
+	{ 0x7a41, KEY_MUTE },
+
+	/* Key codes for the Elgato EyeTV Diversity silver remote */
+	{ 0x4501, KEY_POWER },
+	{ 0x4502, KEY_MUTE },
+	{ 0x4503, KEY_1 },
+	{ 0x4504, KEY_2 },
+	{ 0x4505, KEY_3 },
+	{ 0x4506, KEY_4 },
+	{ 0x4507, KEY_5 },
+	{ 0x4508, KEY_6 },
+	{ 0x4509, KEY_7 },
+	{ 0x450a, KEY_8 },
+	{ 0x450b, KEY_9 },
+	{ 0x450c, KEY_LAST },
+	{ 0x450d, KEY_0 },
+	{ 0x450e, KEY_ENTER },
+	{ 0x450f, KEY_RED },
+	{ 0x4510, KEY_CHANNELUP },
+	{ 0x4511, KEY_GREEN },
+	{ 0x4512, KEY_VOLUMEDOWN },
+	{ 0x4513, KEY_OK },
+	{ 0x4514, KEY_VOLUMEUP },
+	{ 0x4515, KEY_YELLOW },
+	{ 0x4516, KEY_CHANNELDOWN },
+	{ 0x4517, KEY_BLUE },
+	{ 0x4518, KEY_LEFT }, /* Skip backwards */
+	{ 0x4519, KEY_PLAYPAUSE },
+	{ 0x451a, KEY_RIGHT }, /* Skip forward */
+	{ 0x451b, KEY_REWIND },
+	{ 0x451c, KEY_L }, /* Live */
+	{ 0x451d, KEY_FASTFORWARD },
+	{ 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
+	{ 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
+	{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
+	{ 0x4541, KEY_SCREEN }, /*  Full screen toggle, 'Hold' for Teletext */
+	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
+};
+
+static struct rc_keymap dib0700_nec_map = {
+	.map = {
+		.scan    = dib0700_nec_table,
+		.size    = ARRAY_SIZE(dib0700_nec_table),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_DIB0700_NEC_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_nec_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_nec_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dib0700-rc5.c b/drivers/media/IR/keymaps/rc-dib0700-rc5.c
new file mode 100644
index 00000000000..4a4797cfd77
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-dib0700-rc5.c
@@ -0,0 +1,235 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_rc5_table[] = {
+	/* Key codes for the tiny Pinnacle remote*/
+	{ 0x0700, KEY_MUTE },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
+	{ 0x0739, KEY_POWER },
+	{ 0x0703, KEY_VOLUMEUP },
+	{ 0x0709, KEY_VOLUMEDOWN },
+	{ 0x0706, KEY_CHANNELUP },
+	{ 0x070c, KEY_CHANNELDOWN },
+	{ 0x070f, KEY_1 },
+	{ 0x0715, KEY_2 },
+	{ 0x0710, KEY_3 },
+	{ 0x0718, KEY_4 },
+	{ 0x071b, KEY_5 },
+	{ 0x071e, KEY_6 },
+	{ 0x0711, KEY_7 },
+	{ 0x0721, KEY_8 },
+	{ 0x0712, KEY_9 },
+	{ 0x0727, KEY_0 },
+	{ 0x0724, KEY_SCREEN }, /* 'Square' key */
+	{ 0x072a, KEY_TEXT },   /* 'T' key */
+	{ 0x072d, KEY_REWIND },
+	{ 0x0730, KEY_PLAY },
+	{ 0x0733, KEY_FASTFORWARD },
+	{ 0x0736, KEY_RECORD },
+	{ 0x073c, KEY_STOP },
+	{ 0x073f, KEY_CANCEL }, /* '?' key */
+
+	/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
+	{ 0xeb01, KEY_POWER },
+	{ 0xeb02, KEY_1 },
+	{ 0xeb03, KEY_2 },
+	{ 0xeb04, KEY_3 },
+	{ 0xeb05, KEY_4 },
+	{ 0xeb06, KEY_5 },
+	{ 0xeb07, KEY_6 },
+	{ 0xeb08, KEY_7 },
+	{ 0xeb09, KEY_8 },
+	{ 0xeb0a, KEY_9 },
+	{ 0xeb0b, KEY_VIDEO },
+	{ 0xeb0c, KEY_0 },
+	{ 0xeb0d, KEY_REFRESH },
+	{ 0xeb0f, KEY_EPG },
+	{ 0xeb10, KEY_UP },
+	{ 0xeb11, KEY_LEFT },
+	{ 0xeb12, KEY_OK },
+	{ 0xeb13, KEY_RIGHT },
+	{ 0xeb14, KEY_DOWN },
+	{ 0xeb16, KEY_INFO },
+	{ 0xeb17, KEY_RED },
+	{ 0xeb18, KEY_GREEN },
+	{ 0xeb19, KEY_YELLOW },
+	{ 0xeb1a, KEY_BLUE },
+	{ 0xeb1b, KEY_CHANNELUP },
+	{ 0xeb1c, KEY_VOLUMEUP },
+	{ 0xeb1d, KEY_MUTE },
+	{ 0xeb1e, KEY_VOLUMEDOWN },
+	{ 0xeb1f, KEY_CHANNELDOWN },
+	{ 0xeb40, KEY_PAUSE },
+	{ 0xeb41, KEY_HOME },
+	{ 0xeb42, KEY_MENU }, /* DVD Menu */
+	{ 0xeb43, KEY_SUBTITLE },
+	{ 0xeb44, KEY_TEXT }, /* Teletext */
+	{ 0xeb45, KEY_DELETE },
+	{ 0xeb46, KEY_TV },
+	{ 0xeb47, KEY_DVD },
+	{ 0xeb48, KEY_STOP },
+	{ 0xeb49, KEY_VIDEO },
+	{ 0xeb4a, KEY_AUDIO }, /* Music */
+	{ 0xeb4b, KEY_SCREEN }, /* Pic */
+	{ 0xeb4c, KEY_PLAY },
+	{ 0xeb4d, KEY_BACK },
+	{ 0xeb4e, KEY_REWIND },
+	{ 0xeb4f, KEY_FASTFORWARD },
+	{ 0xeb54, KEY_PREVIOUS },
+	{ 0xeb58, KEY_RECORD },
+	{ 0xeb5c, KEY_NEXT },
+
+	/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
+	{ 0x1e00, KEY_0 },
+	{ 0x1e01, KEY_1 },
+	{ 0x1e02, KEY_2 },
+	{ 0x1e03, KEY_3 },
+	{ 0x1e04, KEY_4 },
+	{ 0x1e05, KEY_5 },
+	{ 0x1e06, KEY_6 },
+	{ 0x1e07, KEY_7 },
+	{ 0x1e08, KEY_8 },
+	{ 0x1e09, KEY_9 },
+	{ 0x1e0a, KEY_KPASTERISK },
+	{ 0x1e0b, KEY_RED },
+	{ 0x1e0c, KEY_RADIO },
+	{ 0x1e0d, KEY_MENU },
+	{ 0x1e0e, KEY_GRAVE }, /* # */
+	{ 0x1e0f, KEY_MUTE },
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+	{ 0x1e12, KEY_CHANNEL },
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e18, KEY_VIDEO },
+	{ 0x1e19, KEY_AUDIO },
+	{ 0x1e1a, KEY_MEDIA },
+	{ 0x1e1b, KEY_EPG },
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e1e, KEY_NEXT },
+	{ 0x1e1f, KEY_BACK },
+	{ 0x1e20, KEY_CHANNELUP },
+	{ 0x1e21, KEY_CHANNELDOWN },
+	{ 0x1e24, KEY_LAST }, /* Skip backwards */
+	{ 0x1e25, KEY_OK },
+	{ 0x1e29, KEY_BLUE},
+	{ 0x1e2e, KEY_GREEN },
+	{ 0x1e30, KEY_PAUSE },
+	{ 0x1e32, KEY_REWIND },
+	{ 0x1e34, KEY_FASTFORWARD },
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e36, KEY_STOP },
+	{ 0x1e37, KEY_RECORD },
+	{ 0x1e38, KEY_YELLOW },
+	{ 0x1e3b, KEY_GOTO },
+	{ 0x1e3d, KEY_POWER },
+
+	/* Key codes for the Leadtek Winfast DTV Dongle */
+	{ 0x0042, KEY_POWER },
+	{ 0x077c, KEY_TUNER },
+	{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
+	{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
+	{ 0x0f71, KEY_DOT }, /* frequency */
+	{ 0x0743, KEY_0 },
+	{ 0x0c41, KEY_1 },
+	{ 0x0443, KEY_2 },
+	{ 0x0b7f, KEY_3 },
+	{ 0x0e41, KEY_4 },
+	{ 0x0643, KEY_5 },
+	{ 0x097f, KEY_6 },
+	{ 0x0d7e, KEY_7 },
+	{ 0x057c, KEY_8 },
+	{ 0x0a40, KEY_9 },
+	{ 0x0e4e, KEY_CLEAR },
+	{ 0x047c, KEY_CHANNEL }, /* show channel number */
+	{ 0x0f41, KEY_LAST }, /* recall */
+	{ 0x0342, KEY_MUTE },
+	{ 0x064c, KEY_RESERVED }, /* PIP button*/
+	{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
+	{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
+	{ 0x0b70, KEY_RECORD },
+	{ 0x037d, KEY_VOLUMEUP },
+	{ 0x017d, KEY_VOLUMEDOWN },
+	{ 0x0242, KEY_CHANNELUP },
+	{ 0x007d, KEY_CHANNELDOWN },
+
+	/* Key codes for Nova-TD "credit card" remote control. */
+	{ 0x1d00, KEY_0 },
+	{ 0x1d01, KEY_1 },
+	{ 0x1d02, KEY_2 },
+	{ 0x1d03, KEY_3 },
+	{ 0x1d04, KEY_4 },
+	{ 0x1d05, KEY_5 },
+	{ 0x1d06, KEY_6 },
+	{ 0x1d07, KEY_7 },
+	{ 0x1d08, KEY_8 },
+	{ 0x1d09, KEY_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_CHANNEL },
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },
+	{ 0x1d1f, KEY_BACK },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+};
+
+static struct rc_keymap dib0700_rc5_map = {
+	.map = {
+		.scan    = dib0700_rc5_table,
+		.size    = ARRAY_SIZE(dib0700_rc5_table),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_DIB0700_RC5_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_rc5_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_rc5_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-lirc.c b/drivers/media/IR/keymaps/rc-lirc.c
new file mode 100644
index 00000000000..43fcf903508
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-lirc.c
@@ -0,0 +1,41 @@
+/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
+ * all raw IR data to the lirc userspace decoder.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/ir-core.h>
+
+static struct ir_scancode lirc[] = {
+	{ },
+};
+
+static struct rc_keymap lirc_map = {
+	.map = {
+		.scan    = lirc,
+		.size    = ARRAY_SIZE(lirc),
+		.ir_type = IR_TYPE_LIRC,
+		.name    = RC_MAP_LIRC,
+	}
+};
+
+static int __init init_rc_map_lirc(void)
+{
+	return ir_register_map(&lirc_map);
+}
+
+static void __exit exit_rc_map_lirc(void)
+{
+	ir_unregister_map(&lirc_map);
+}
+
+module_init(init_rc_map_lirc)
+module_exit(exit_rc_map_lirc)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c
new file mode 100644
index 00000000000..c6726a8039b
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-rc6-mce.c
@@ -0,0 +1,105 @@
+/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use
+ * with the Media Center Edition eHome Infrared Transceiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc6_mce[] = {
+	{ 0x800f0415, KEY_REWIND },
+	{ 0x800f0414, KEY_FASTFORWARD },
+	{ 0x800f041b, KEY_PREVIOUS },
+	{ 0x800f041a, KEY_NEXT },
+
+	{ 0x800f0416, KEY_PLAY },
+	{ 0x800f0418, KEY_PAUSE },
+	{ 0x800f0419, KEY_STOP },
+	{ 0x800f0417, KEY_RECORD },
+
+	{ 0x800f041e, KEY_UP },
+	{ 0x800f041f, KEY_DOWN },
+	{ 0x800f0420, KEY_LEFT },
+	{ 0x800f0421, KEY_RIGHT },
+
+	{ 0x800f040b, KEY_ENTER },
+	{ 0x800f0422, KEY_OK },
+	{ 0x800f0423, KEY_EXIT },
+	{ 0x800f040a, KEY_DELETE },
+
+	{ 0x800f040e, KEY_MUTE },
+	{ 0x800f0410, KEY_VOLUMEUP },
+	{ 0x800f0411, KEY_VOLUMEDOWN },
+	{ 0x800f0412, KEY_CHANNELUP },
+	{ 0x800f0413, KEY_CHANNELDOWN },
+
+	{ 0x800f0401, KEY_NUMERIC_1 },
+	{ 0x800f0402, KEY_NUMERIC_2 },
+	{ 0x800f0403, KEY_NUMERIC_3 },
+	{ 0x800f0404, KEY_NUMERIC_4 },
+	{ 0x800f0405, KEY_NUMERIC_5 },
+	{ 0x800f0406, KEY_NUMERIC_6 },
+	{ 0x800f0407, KEY_NUMERIC_7 },
+	{ 0x800f0408, KEY_NUMERIC_8 },
+	{ 0x800f0409, KEY_NUMERIC_9 },
+	{ 0x800f0400, KEY_NUMERIC_0 },
+
+	{ 0x800f041d, KEY_NUMERIC_STAR },
+	{ 0x800f041c, KEY_NUMERIC_POUND },
+
+	{ 0x800f0446, KEY_TV },
+	{ 0x800f0447, KEY_AUDIO }, /* My Music */
+	{ 0x800f0448, KEY_PVR }, /* RecordedTV */
+	{ 0x800f0449, KEY_CAMERA },
+	{ 0x800f044a, KEY_VIDEO },
+	{ 0x800f0424, KEY_DVD },
+	{ 0x800f0425, KEY_TUNER }, /* LiveTV */
+	{ 0x800f0450, KEY_RADIO },
+
+	{ 0x800f044c, KEY_LANGUAGE },
+	{ 0x800f0427, KEY_ZOOM }, /* Aspect */
+
+	{ 0x800f045b, KEY_RED },
+	{ 0x800f045c, KEY_GREEN },
+	{ 0x800f045d, KEY_YELLOW },
+	{ 0x800f045e, KEY_BLUE },
+
+	{ 0x800f040f, KEY_INFO },
+	{ 0x800f0426, KEY_EPG }, /* Guide */
+	{ 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
+	{ 0x800f044d, KEY_TITLE },
+
+	{ 0x800f040c, KEY_POWER },
+	{ 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
+
+};
+
+static struct rc_keymap rc6_mce_map = {
+	.map = {
+		.scan    = rc6_mce,
+		.size    = ARRAY_SIZE(rc6_mce),
+		.ir_type = IR_TYPE_RC6,
+		.name    = RC_MAP_RC6_MCE,
+	}
+};
+
+static int __init init_rc_map_rc6_mce(void)
+{
+	return ir_register_map(&rc6_mce_map);
+}
+
+static void __exit exit_rc_map_rc6_mce(void)
+{
+	ir_unregister_map(&rc6_mce_map);
+}
+
+module_init(init_rc_map_rc6_mce)
+module_exit(exit_rc_map_rc6_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/lirc_dev.c b/drivers/media/IR/lirc_dev.c
new file mode 100644
index 00000000000..899891bec35
--- /dev/null
+++ b/drivers/media/IR/lirc_dev.c
@@ -0,0 +1,764 @@
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+static int debug;
+
+#define IRCTL_DEV_NAME	"BaseRemoteCtl"
+#define NOPLUG		-1
+#define LOGHEAD		"lirc_dev (%s[%d]): "
+
+static dev_t lirc_base_dev;
+
+struct irctl {
+	struct lirc_driver d;
+	int attached;
+	int open;
+
+	struct mutex irctl_lock;
+	struct lirc_buffer *buf;
+	unsigned int chunk_size;
+
+	struct task_struct *task;
+	long jiffies_to_wait;
+
+	struct cdev cdev;
+};
+
+static DEFINE_MUTEX(lirc_dev_lock);
+
+static struct irctl *irctls[MAX_IRCTL_DEVICES];
+
+/* Only used for sysfs but defined to void otherwise */
+static struct class *lirc_class;
+
+/*  helper function
+ *  initializes the irctl structure
+ */
+static void init_irctl(struct irctl *ir)
+{
+	dev_dbg(ir->d.dev, LOGHEAD "initializing irctl\n",
+		ir->d.name, ir->d.minor);
+	mutex_init(&ir->irctl_lock);
+	ir->d.minor = NOPLUG;
+}
+
+static void cleanup(struct irctl *ir)
+{
+	dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor);
+
+	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+
+	if (ir->buf != ir->d.rbuf) {
+		lirc_buffer_free(ir->buf);
+		kfree(ir->buf);
+	}
+	ir->buf = NULL;
+}
+
+/*  helper function
+ *  reads key codes from driver and puts them into buffer
+ *  returns 0 on success
+ */
+static int add_to_buf(struct irctl *ir)
+{
+	if (ir->d.add_to_buf) {
+		int res = -ENODATA;
+		int got_data = 0;
+
+		/*
+		 * service the device as long as it is returning
+		 * data and we have space
+		 */
+get_data:
+		res = ir->d.add_to_buf(ir->d.data, ir->buf);
+		if (res == 0) {
+			got_data++;
+			goto get_data;
+		}
+
+		if (res == -ENODEV)
+			kthread_stop(ir->task);
+
+		return got_data ? 0 : res;
+	}
+
+	return 0;
+}
+
+/* main function of the polling thread
+ */
+static int lirc_thread(void *irctl)
+{
+	struct irctl *ir = irctl;
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n",
+		ir->d.name, ir->d.minor);
+
+	do {
+		if (ir->open) {
+			if (ir->jiffies_to_wait) {
+				set_current_state(TASK_INTERRUPTIBLE);
+				schedule_timeout(ir->jiffies_to_wait);
+			}
+			if (kthread_should_stop())
+				break;
+			if (!add_to_buf(ir))
+				wake_up_interruptible(&ir->buf->wait_poll);
+		} else {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule();
+		}
+	} while (!kthread_should_stop());
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n",
+		ir->d.name, ir->d.minor);
+
+	return 0;
+}
+
+
+static struct file_operations fops = {
+	.owner		= THIS_MODULE,
+	.read		= lirc_dev_fop_read,
+	.write		= lirc_dev_fop_write,
+	.poll		= lirc_dev_fop_poll,
+	.unlocked_ioctl	= lirc_dev_fop_ioctl,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+};
+
+static int lirc_cdev_add(struct irctl *ir)
+{
+	int retval;
+	struct lirc_driver *d = &ir->d;
+
+	if (d->fops) {
+		cdev_init(&ir->cdev, d->fops);
+		ir->cdev.owner = d->owner;
+	} else {
+		cdev_init(&ir->cdev, &fops);
+		ir->cdev.owner = THIS_MODULE;
+	}
+	kobject_set_name(&ir->cdev.kobj, "lirc%d", d->minor);
+
+	retval = cdev_add(&ir->cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
+	if (retval)
+		kobject_put(&ir->cdev.kobj);
+
+	return retval;
+}
+
+int lirc_register_driver(struct lirc_driver *d)
+{
+	struct irctl *ir;
+	int minor;
+	int bytes_in_key;
+	unsigned int chunk_size;
+	unsigned int buffer_size;
+	int err;
+
+	if (!d) {
+		printk(KERN_ERR "lirc_dev: lirc_register_driver: "
+		       "driver pointer must be not NULL!\n");
+		err = -EBADRQC;
+		goto out;
+	}
+
+	if (MAX_IRCTL_DEVICES <= d->minor) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"\"minor\" must be between 0 and %d (%d)!\n",
+			MAX_IRCTL_DEVICES-1, d->minor);
+		err = -EBADRQC;
+		goto out;
+	}
+
+	if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"code length in bits for minor (%d) "
+			"must be less than %d!\n",
+			d->minor, BUFLEN * 8);
+		err = -EBADRQC;
+		goto out;
+	}
+
+	dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n",
+		d->sample_rate);
+	if (d->sample_rate) {
+		if (2 > d->sample_rate || HZ < d->sample_rate) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"sample_rate must be between 2 and %d!\n", HZ);
+			err = -EBADRQC;
+			goto out;
+		}
+		if (!d->add_to_buf) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"add_to_buf cannot be NULL when "
+				"sample_rate is set\n");
+			err = -EBADRQC;
+			goto out;
+		}
+	} else if (!(d->fops && d->fops->read) && !d->rbuf) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"fops->read and rbuf cannot all be NULL!\n");
+		err = -EBADRQC;
+		goto out;
+	} else if (!d->rbuf) {
+		if (!(d->fops && d->fops->read && d->fops->poll &&
+		      d->fops->unlocked_ioctl)) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"neither read, poll nor unlocked_ioctl can be NULL!\n");
+			err = -EBADRQC;
+			goto out;
+		}
+	}
+
+	mutex_lock(&lirc_dev_lock);
+
+	minor = d->minor;
+
+	if (minor < 0) {
+		/* find first free slot for driver */
+		for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++)
+			if (!irctls[minor])
+				break;
+		if (MAX_IRCTL_DEVICES == minor) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"no free slots for drivers!\n");
+			err = -ENOMEM;
+			goto out_lock;
+		}
+	} else if (irctls[minor]) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"minor (%d) just registered!\n", minor);
+		err = -EBUSY;
+		goto out_lock;
+	}
+
+	ir = kzalloc(sizeof(struct irctl), GFP_KERNEL);
+	if (!ir) {
+		err = -ENOMEM;
+		goto out_lock;
+	}
+	init_irctl(ir);
+	irctls[minor] = ir;
+	d->minor = minor;
+
+	if (d->sample_rate) {
+		ir->jiffies_to_wait = HZ / d->sample_rate;
+	} else {
+		/* it means - wait for external event in task queue */
+		ir->jiffies_to_wait = 0;
+	}
+
+	/* some safety check 8-) */
+	d->name[sizeof(d->name)-1] = '\0';
+
+	bytes_in_key = BITS_TO_LONGS(d->code_length) +
+			(d->code_length % 8 ? 1 : 0);
+	buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key;
+	chunk_size  = d->chunk_size  ? d->chunk_size  : bytes_in_key;
+
+	if (d->rbuf) {
+		ir->buf = d->rbuf;
+	} else {
+		ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+		if (!ir->buf) {
+			err = -ENOMEM;
+			goto out_lock;
+		}
+		err = lirc_buffer_init(ir->buf, chunk_size, buffer_size);
+		if (err) {
+			kfree(ir->buf);
+			goto out_lock;
+		}
+	}
+	ir->chunk_size = ir->buf->chunk_size;
+
+	if (d->features == 0)
+		d->features = LIRC_CAN_REC_LIRCCODE;
+
+	ir->d = *d;
+	ir->d.minor = minor;
+
+	device_create(lirc_class, ir->d.dev,
+		      MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL,
+		      "lirc%u", ir->d.minor);
+
+	if (d->sample_rate) {
+		/* try to fire up polling thread */
+		ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
+		if (IS_ERR(ir->task)) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"cannot run poll thread for minor = %d\n",
+				d->minor);
+			err = -ECHILD;
+			goto out_sysfs;
+		}
+	}
+
+	err = lirc_cdev_add(ir);
+	if (err)
+		goto out_sysfs;
+
+	ir->attached = 1;
+	mutex_unlock(&lirc_dev_lock);
+
+	dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n",
+		 ir->d.name, ir->d.minor);
+	return minor;
+
+out_sysfs:
+	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+out_lock:
+	mutex_unlock(&lirc_dev_lock);
+out:
+	return err;
+}
+EXPORT_SYMBOL(lirc_register_driver);
+
+int lirc_unregister_driver(int minor)
+{
+	struct irctl *ir;
+
+	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
+		printk(KERN_ERR "lirc_dev: lirc_unregister_driver: "
+		       "\"minor (%d)\" must be between 0 and %d!\n",
+		       minor, MAX_IRCTL_DEVICES-1);
+		return -EBADRQC;
+	}
+
+	ir = irctls[minor];
+
+	mutex_lock(&lirc_dev_lock);
+
+	if (ir->d.minor != minor) {
+		printk(KERN_ERR "lirc_dev: lirc_unregister_driver: "
+		       "minor (%d) device not registered!", minor);
+		mutex_unlock(&lirc_dev_lock);
+		return -ENOENT;
+	}
+
+	/* end up polling thread */
+	if (ir->task)
+		kthread_stop(ir->task);
+
+	dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n",
+		ir->d.name, ir->d.minor);
+
+	ir->attached = 0;
+	if (ir->open) {
+		dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n",
+			ir->d.name, ir->d.minor);
+		wake_up_interruptible(&ir->buf->wait_poll);
+		mutex_lock(&ir->irctl_lock);
+		ir->d.set_use_dec(ir->d.data);
+		module_put(ir->d.owner);
+		mutex_unlock(&ir->irctl_lock);
+		cdev_del(&ir->cdev);
+	} else {
+		cleanup(ir);
+		cdev_del(&ir->cdev);
+		kfree(ir);
+		irctls[minor] = NULL;
+	}
+
+	mutex_unlock(&lirc_dev_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(lirc_unregister_driver);
+
+int lirc_dev_fop_open(struct inode *inode, struct file *file)
+{
+	struct irctl *ir;
+	int retval = 0;
+
+	if (iminor(inode) >= MAX_IRCTL_DEVICES) {
+		printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
+		       iminor(inode));
+		return -ENODEV;
+	}
+
+	if (mutex_lock_interruptible(&lirc_dev_lock))
+		return -ERESTARTSYS;
+
+	ir = irctls[iminor(inode)];
+	if (!ir) {
+		retval = -ENODEV;
+		goto error;
+	}
+	file->private_data = ir;
+
+	dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor);
+
+	if (ir->d.minor == NOPLUG) {
+		retval = -ENODEV;
+		goto error;
+	}
+
+	if (ir->open) {
+		retval = -EBUSY;
+		goto error;
+	}
+
+	if (try_module_get(ir->d.owner)) {
+		++ir->open;
+		retval = ir->d.set_use_inc(ir->d.data);
+
+		if (retval) {
+			module_put(ir->d.owner);
+			--ir->open;
+		} else {
+			lirc_buffer_clear(ir->buf);
+		}
+		if (ir->task)
+			wake_up_process(ir->task);
+	}
+
+error:
+	if (ir)
+		dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n",
+			ir->d.name, ir->d.minor, retval);
+
+	mutex_unlock(&lirc_dev_lock);
+
+	return retval;
+}
+EXPORT_SYMBOL(lirc_dev_fop_open);
+
+int lirc_dev_fop_close(struct inode *inode, struct file *file)
+{
+	struct irctl *ir = irctls[iminor(inode)];
+
+	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
+
+	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
+
+	--ir->open;
+	if (ir->attached) {
+		ir->d.set_use_dec(ir->d.data);
+		module_put(ir->d.owner);
+	} else {
+		cleanup(ir);
+		irctls[ir->d.minor] = NULL;
+		kfree(ir);
+	}
+
+	mutex_unlock(&lirc_dev_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(lirc_dev_fop_close);
+
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+	unsigned int ret;
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
+
+	if (!ir->attached) {
+		mutex_unlock(&ir->irctl_lock);
+		return POLLERR;
+	}
+
+	poll_wait(file, &ir->buf->wait_poll, wait);
+
+	if (ir->buf)
+		if (lirc_buffer_empty(ir->buf))
+			ret = 0;
+		else
+			ret = POLLIN | POLLRDNORM;
+	else
+		ret = POLLERR;
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
+		ir->d.name, ir->d.minor, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(lirc_dev_fop_poll);
+
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	unsigned long mode;
+	int result = 0;
+	struct irctl *ir = file->private_data;
+
+	dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n",
+		ir->d.name, ir->d.minor, cmd);
+
+	if (ir->d.minor == NOPLUG || !ir->attached) {
+		dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
+			ir->d.name, ir->d.minor);
+		return -ENODEV;
+	}
+
+	mutex_lock(&ir->irctl_lock);
+
+	switch (cmd) {
+	case LIRC_GET_FEATURES:
+		result = put_user(ir->d.features, (unsigned long *)arg);
+		break;
+	case LIRC_GET_REC_MODE:
+		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(LIRC_REC2MODE
+				  (ir->d.features & LIRC_CAN_REC_MASK),
+				  (unsigned long *)arg);
+		break;
+	case LIRC_SET_REC_MODE:
+		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = get_user(mode, (unsigned long *)arg);
+		if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
+			result = -EINVAL;
+		/*
+		 * FIXME: We should actually set the mode somehow but
+		 * for now, lirc_serial doesn't support mode changing either
+		 */
+		break;
+	case LIRC_GET_LENGTH:
+		result = put_user(ir->d.code_length, (unsigned long *)arg);
+		break;
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+		    ir->d.min_timeout == 0) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(ir->d.min_timeout, (unsigned long *)arg);
+		break;
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+		    ir->d.max_timeout == 0) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(ir->d.max_timeout, (unsigned long *)arg);
+		break;
+	default:
+		result = -EINVAL;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n",
+		ir->d.name, ir->d.minor, result);
+
+	mutex_unlock(&ir->irctl_lock);
+
+	return result;
+}
+EXPORT_SYMBOL(lirc_dev_fop_ioctl);
+
+ssize_t lirc_dev_fop_read(struct file *file,
+			  char *buffer,
+			  size_t length,
+			  loff_t *ppos)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+	unsigned char buf[ir->chunk_size];
+	int ret = 0, written = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor);
+
+	if (mutex_lock_interruptible(&ir->irctl_lock))
+		return -ERESTARTSYS;
+	if (!ir->attached) {
+		mutex_unlock(&ir->irctl_lock);
+		return -ENODEV;
+	}
+
+	if (length % ir->chunk_size) {
+		dev_dbg(ir->d.dev, LOGHEAD "read result = -EINVAL\n",
+			ir->d.name, ir->d.minor);
+		mutex_unlock(&ir->irctl_lock);
+		return -EINVAL;
+	}
+
+	/*
+	 * we add ourselves to the task queue before buffer check
+	 * to avoid losing scan code (in case when queue is awaken somewhere
+	 * between while condition checking and scheduling)
+	 */
+	add_wait_queue(&ir->buf->wait_poll, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	/*
+	 * while we didn't provide 'length' bytes, device is opened in blocking
+	 * mode and 'copy_to_user' is happy, wait for data.
+	 */
+	while (written < length && ret == 0) {
+		if (lirc_buffer_empty(ir->buf)) {
+			/* According to the read(2) man page, 'written' can be
+			 * returned as less than 'length', instead of blocking
+			 * again, returning -EWOULDBLOCK, or returning
+			 * -ERESTARTSYS */
+			if (written)
+				break;
+			if (file->f_flags & O_NONBLOCK) {
+				ret = -EWOULDBLOCK;
+				break;
+			}
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+
+			mutex_unlock(&ir->irctl_lock);
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			if (mutex_lock_interruptible(&ir->irctl_lock)) {
+				ret = -ERESTARTSYS;
+				remove_wait_queue(&ir->buf->wait_poll, &wait);
+				set_current_state(TASK_RUNNING);
+				goto out_unlocked;
+			}
+
+			if (!ir->attached) {
+				ret = -ENODEV;
+				break;
+			}
+		} else {
+			lirc_buffer_read(ir->buf, buf);
+			ret = copy_to_user((void *)buffer+written, buf,
+					   ir->buf->chunk_size);
+			written += ir->buf->chunk_size;
+		}
+	}
+
+	remove_wait_queue(&ir->buf->wait_poll, &wait);
+	set_current_state(TASK_RUNNING);
+	mutex_unlock(&ir->irctl_lock);
+
+out_unlocked:
+	dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
+		ir->d.name, ir->d.minor, ret ? "-EFAULT" : "OK", ret);
+
+	return ret ? ret : written;
+}
+EXPORT_SYMBOL(lirc_dev_fop_read);
+
+void *lirc_get_pdata(struct file *file)
+{
+	void *data = NULL;
+
+	if (file && file->f_dentry && file->f_dentry->d_inode &&
+	    file->f_dentry->d_inode->i_rdev) {
+		struct irctl *ir;
+		ir = irctls[iminor(file->f_dentry->d_inode)];
+		data = ir->d.data;
+	}
+
+	return data;
+}
+EXPORT_SYMBOL(lirc_get_pdata);
+
+
+ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
+			   size_t length, loff_t *ppos)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+
+	dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor);
+
+	if (!ir->attached)
+		return -ENODEV;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(lirc_dev_fop_write);
+
+
+static int __init lirc_dev_init(void)
+{
+	int retval;
+
+	lirc_class = class_create(THIS_MODULE, "lirc");
+	if (IS_ERR(lirc_class)) {
+		retval = PTR_ERR(lirc_class);
+		printk(KERN_ERR "lirc_dev: class_create failed\n");
+		goto error;
+	}
+
+	retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES,
+				     IRCTL_DEV_NAME);
+	if (retval) {
+		class_destroy(lirc_class);
+		printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
+		goto error;
+	}
+
+
+	printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
+	       "major %d \n", MAJOR(lirc_base_dev));
+
+error:
+	return retval;
+}
+
+
+
+static void __exit lirc_dev_exit(void)
+{
+	class_destroy(lirc_class);
+	unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
+	printk(KERN_INFO "lirc_dev: module unloaded\n");
+}
+
+module_init(lirc_dev_init);
+module_exit(lirc_dev_exit);
+
+MODULE_DESCRIPTION("LIRC base driver module");
+MODULE_AUTHOR("Artur Lipowski");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
new file mode 100644
index 00000000000..78bf7f77a1a
--- /dev/null
+++ b/drivers/media/IR/mceusb.c
@@ -0,0 +1,1143 @@
+/*
+ * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
+ * Conti, Martin Blatter and Daniel Melander, the latter of which was
+ * in turn also based on the lirc_atiusb driver by Paul Miller. The
+ * two mce drivers were merged into one by Jarod Wilson, with transmit
+ * support for the 1st-gen device added primarily by Patrick Calhoun,
+ * with a bit of tweaks by Jarod. Debugging improvements and proper
+ * support for what appears to be 3rd-gen hardware added by Jarod.
+ * Initial port from lirc driver to ir-core drivery by Jarod, based
+ * partially on a port to an earlier proposed IR infrastructure by
+ * Jon Smirl, which included enhancements and simplifications to the
+ * incoming IR buffer parsing routines.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+
+#define DRIVER_VERSION	"1.91"
+#define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
+#define DRIVER_DESC	"Windows Media Center Ed. eHome Infrared Transceiver " \
+			"device driver"
+#define DRIVER_NAME	"mceusb"
+
+#define USB_BUFLEN	32	/* USB reception buffer length */
+#define USB_CTRL_MSG_SZ	2	/* Size of usb ctrl msg on gen1 hw */
+#define MCE_G1_INIT_MSGS 40	/* Init messages on gen1 hw to throw out */
+
+/* MCE constants */
+#define MCE_CMDBUF_SIZE	384 /* MCE Command buffer length */
+#define MCE_TIME_UNIT	50 /* Approx 50us resolution */
+#define MCE_CODE_LENGTH	5 /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE	4 /* Normal length of packet (without header) */
+#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_CONTROL_HEADER 0x9F /* MCE status header */
+#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT	0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK	0x7F /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
+#define MCE_PACKET_LENGTH_MASK  0x1F /* Packet length mask */
+
+
+/* module parameters */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* general constants */
+#define SEND_FLAG_IN_PROGRESS	1
+#define SEND_FLAG_COMPLETE	2
+#define RECV_FLAG_IN_PROGRESS	3
+#define RECV_FLAG_COMPLETE	4
+
+#define MCEUSB_RX		1
+#define MCEUSB_TX		2
+
+#define VENDOR_PHILIPS		0x0471
+#define VENDOR_SMK		0x0609
+#define VENDOR_TATUNG		0x1460
+#define VENDOR_GATEWAY		0x107b
+#define VENDOR_SHUTTLE		0x1308
+#define VENDOR_SHUTTLE2		0x051c
+#define VENDOR_MITSUMI		0x03ee
+#define VENDOR_TOPSEED		0x1784
+#define VENDOR_RICAVISION	0x179d
+#define VENDOR_ITRON		0x195d
+#define VENDOR_FIC		0x1509
+#define VENDOR_LG		0x043e
+#define VENDOR_MICROSOFT	0x045e
+#define VENDOR_FORMOSA		0x147a
+#define VENDOR_FINTEK		0x1934
+#define VENDOR_PINNACLE		0x2304
+#define VENDOR_ECS		0x1019
+#define VENDOR_WISTRON		0x0fb8
+#define VENDOR_COMPRO		0x185b
+#define VENDOR_NORTHSTAR	0x04eb
+#define VENDOR_REALTEK		0x0bda
+#define VENDOR_TIVO		0x105a
+
+static struct usb_device_id mceusb_dev_table[] = {
+	/* Original Microsoft MCE IR Transceiver (often HP-branded) */
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+	/* Philips Infrared Transceiver - Sahara branded */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
+	/* Philips Infrared Transceiver - HP branded */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
+	/* Philips SRM5100 */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
+	/* Philips Infrared Transceiver - Omaura */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
+	/* Philips Infrared Transceiver - Spinel plus */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
+	/* Philips eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+	/* Realtek MCE IR Receiver */
+	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
+	/* SMK/Toshiba G83C0004D410 */
+	{ USB_DEVICE(VENDOR_SMK, 0x031d) },
+	/* SMK eHome Infrared Transceiver (Sony VAIO) */
+	{ USB_DEVICE(VENDOR_SMK, 0x0322) },
+	/* bundled with Hauppauge PVR-150 */
+	{ USB_DEVICE(VENDOR_SMK, 0x0334) },
+	/* SMK eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* Tatung eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+	/* Shuttle eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
+	/* Shuttle eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
+	/* Gateway eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
+	/* Mitsumi */
+	{ USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+	/* Topseed HP eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x000a) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
+	/* Ricavision internal Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
+	/* Itron ione Libra Q-11 */
+	{ USB_DEVICE(VENDOR_ITRON, 0x7002) },
+	/* FIC eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FIC, 0x9242) },
+	/* LG eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_LG, 0x9803) },
+	/* Microsoft MCE Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
+	/* Formosa eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
+	/* Formosa21 / eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
+	/* Formosa aim / Trust MCE Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
+	/* Formosa Industrial Computing / Beanbag Emulation Device */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
+	/* Formosa21 / eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
+	/* Formosa Industrial Computing AIM IR605/A */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
+	/* Formosa Industrial Computing */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+	/* Fintek eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x0702) },
+	/* Pinnacle Remote Kit */
+	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+	/* Elitegroup Computer Systems IR */
+	{ USB_DEVICE(VENDOR_ECS, 0x0f38) },
+	/* Wistron Corp. eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_WISTRON, 0x0002) },
+	/* Compro K100 */
+	{ USB_DEVICE(VENDOR_COMPRO, 0x3020) },
+	/* Compro K100 v2 */
+	{ USB_DEVICE(VENDOR_COMPRO, 0x3082) },
+	/* Northstar Systems, Inc. eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
+	/* TiVo PC IR Receiver */
+	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
+	/* Terminating entry */
+	{ }
+};
+
+static struct usb_device_id gen3_list[] = {
+	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+	{}
+};
+
+static struct usb_device_id microsoft_gen1_list[] = {
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+	{}
+};
+
+static struct usb_device_id std_tx_mask_list[] = {
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
+	{ USB_DEVICE(VENDOR_SMK, 0x031d) },
+	{ USB_DEVICE(VENDOR_SMK, 0x0322) },
+	{ USB_DEVICE(VENDOR_SMK, 0x0334) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x000a) },
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
+	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+	{}
+};
+
+/* data structure for each usb transceiver */
+struct mceusb_dev {
+	/* ir-core bits */
+	struct ir_input_dev *irdev;
+	struct ir_dev_props *props;
+	struct ir_raw_event rawir;
+
+	/* core device bits */
+	struct device *dev;
+	struct input_dev *idev;
+
+	/* usb */
+	struct usb_device *usbdev;
+	struct urb *urb_in;
+	struct usb_endpoint_descriptor *usb_ep_in;
+	struct usb_endpoint_descriptor *usb_ep_out;
+
+	/* buffers and dma */
+	unsigned char *buf_in;
+	unsigned int len_in;
+	u8 cmd;		/* MCE command type */
+	u8 rem;		/* Remaining IR data bytes in packet */
+	dma_addr_t dma_in;
+	dma_addr_t dma_out;
+
+	struct {
+		u32 connected:1;
+		u32 tx_mask_inverted:1;
+		u32 microsoft_gen1:1;
+		u32 reserved:29;
+	} flags;
+
+	/* transmit support */
+	int send_flags;
+	u32 carrier;
+	unsigned char tx_mask;
+
+	char name[128];
+	char phys[64];
+};
+
+/*
+ * MCE Device Command Strings
+ * Device command responses vary from device to device...
+ * - DEVICE_RESET resets the hardware to its default state
+ * - GET_REVISION fetches the hardware/software revision, common
+ *   replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
+ * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
+ *   device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
+ *   meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
+ *   ((clk / frequency) - 1)
+ * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
+ *   response in the form of 9f 0c msb lsb
+ * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
+ *   the form of 9f 08 bm, where bm is the bitmask
+ * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
+ *   general use one or short-range learning one, in the form of
+ *   9f 14 ss, where ss is either 01 for long-range or 02 for short
+ * - SET_CARRIER_FREQ sets a new carrier mode and frequency
+ * - SET_TX_BITMASK sets the transmitter bitmask
+ * - SET_RX_TIMEOUT sets the receiver timeout
+ * - SET_RX_SENSOR sets which receiver sensor to use
+ */
+static char DEVICE_RESET[]	= {0x00, 0xff, 0xaa};
+static char GET_REVISION[]	= {0xff, 0x0b};
+static char GET_UNKNOWN[]	= {0xff, 0x18};
+static char GET_UNKNOWN2[]	= {0x9f, 0x05};
+static char GET_CARRIER_FREQ[]	= {0x9f, 0x07};
+static char GET_RX_TIMEOUT[]	= {0x9f, 0x0d};
+static char GET_TX_BITMASK[]	= {0x9f, 0x13};
+static char GET_RX_SENSOR[]	= {0x9f, 0x15};
+/* sub in desired values in lower byte or bytes for full command */
+/* FIXME: make use of these for transmit.
+static char SET_CARRIER_FREQ[]	= {0x9f, 0x06, 0x00, 0x00};
+static char SET_TX_BITMASK[]	= {0x9f, 0x08, 0x00};
+static char SET_RX_TIMEOUT[]	= {0x9f, 0x0c, 0x00, 0x00};
+static char SET_RX_SENSOR[]	= {0x9f, 0x14, 0x00};
+*/
+
+static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
+				 int len, bool out)
+{
+	char codes[USB_BUFLEN * 3 + 1];
+	char inout[9];
+	int i;
+	u8 cmd, subcmd, data1, data2;
+	struct device *dev = ir->dev;
+	int idx = 0;
+
+	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+	if (ir->flags.microsoft_gen1 && !out)
+		idx = 2;
+
+	if (len <= idx)
+		return;
+
+	for (i = 0; i < len && i < USB_BUFLEN; i++)
+		snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xFF);
+
+	dev_info(dev, "%sx data: %s (length=%d)\n",
+		 (out ? "t" : "r"), codes, len);
+
+	if (out)
+		strcpy(inout, "Request\0");
+	else
+		strcpy(inout, "Got\0");
+
+	cmd    = buf[idx] & 0xff;
+	subcmd = buf[idx + 1] & 0xff;
+	data1  = buf[idx + 2] & 0xff;
+	data2  = buf[idx + 3] & 0xff;
+
+	switch (cmd) {
+	case 0x00:
+		if (subcmd == 0xff && data1 == 0xaa)
+			dev_info(dev, "Device reset requested\n");
+		else
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+		break;
+	case 0xff:
+		switch (subcmd) {
+		case 0x0b:
+			if (len == 2)
+				dev_info(dev, "Get hw/sw rev?\n");
+			else
+				dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
+					 "0x%02x 0x%02x\n", data1, data2,
+					 buf[idx + 4], buf[idx + 5]);
+			break;
+		case 0xaa:
+			dev_info(dev, "Device reset requested\n");
+			break;
+		case 0xfe:
+			dev_info(dev, "Previous command not supported\n");
+			break;
+		case 0x18:
+		case 0x1b:
+		default:
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+			break;
+		}
+		break;
+	case 0x9f:
+		switch (subcmd) {
+		case 0x03:
+			dev_info(dev, "Ping\n");
+			break;
+		case 0x04:
+			dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
+				 data1, data2);
+			break;
+		case 0x06:
+			dev_info(dev, "%s carrier mode and freq of "
+				 "0x%02x 0x%02x\n", inout, data1, data2);
+			break;
+		case 0x07:
+			dev_info(dev, "Get carrier mode and freq\n");
+			break;
+		case 0x08:
+			dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
+				 inout, data1);
+			break;
+		case 0x0c:
+			/* value is in units of 50us, so x*50/100 or x/2 ms */
+			dev_info(dev, "%s receive timeout of %d ms\n",
+				 inout, ((data1 << 8) | data2) / 2);
+			break;
+		case 0x0d:
+			dev_info(dev, "Get receive timeout\n");
+			break;
+		case 0x13:
+			dev_info(dev, "Get transmit blaster mask\n");
+			break;
+		case 0x14:
+			dev_info(dev, "%s %s-range receive sensor in use\n",
+				 inout, data1 == 0x02 ? "short" : "long");
+			break;
+		case 0x15:
+			if (len == 2)
+				dev_info(dev, "Get receive sensor\n");
+			else
+				dev_info(dev, "Received pulse count is %d\n",
+					 ((data1 << 8) | data2));
+			break;
+		case 0xfe:
+			dev_info(dev, "Error! Hardware is likely wedged...\n");
+			break;
+		case 0x05:
+		case 0x09:
+		case 0x0f:
+		default:
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct mceusb_dev *ir;
+	int len;
+
+	if (!urb)
+		return;
+
+	ir = urb->context;
+	if (ir) {
+		len = urb->actual_length;
+
+		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+			urb->status, len);
+
+		if (debug)
+			mceusb_dev_printdata(ir, urb->transfer_buffer,
+					     len, true);
+	}
+
+}
+
+/* request incoming or send outgoing usb packet - used to initialize remote */
+static void mce_request_packet(struct mceusb_dev *ir,
+			       struct usb_endpoint_descriptor *ep,
+			       unsigned char *data, int size, int urb_type)
+{
+	int res;
+	struct urb *async_urb;
+	struct device *dev = ir->dev;
+	unsigned char *async_buf;
+
+	if (urb_type == MCEUSB_TX) {
+		async_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (unlikely(!async_urb)) {
+			dev_err(dev, "Error, couldn't allocate urb!\n");
+			return;
+		}
+
+		async_buf = kzalloc(size, GFP_KERNEL);
+		if (!async_buf) {
+			dev_err(dev, "Error, couldn't allocate buf!\n");
+			usb_free_urb(async_urb);
+			return;
+		}
+
+		/* outbound data */
+		usb_fill_int_urb(async_urb, ir->usbdev,
+			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
+			async_buf, size, (usb_complete_t) usb_async_callback,
+			ir, ep->bInterval);
+		memcpy(async_buf, data, size);
+
+	} else if (urb_type == MCEUSB_RX) {
+		/* standard request */
+		async_urb = ir->urb_in;
+		ir->send_flags = RECV_FLAG_IN_PROGRESS;
+
+	} else {
+		dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
+		return;
+	}
+
+	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+
+	async_urb->transfer_buffer_length = size;
+	async_urb->dev = ir->usbdev;
+
+	res = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (res) {
+		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		return;
+	}
+	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+}
+
+static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+	mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
+}
+
+static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+	mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
+}
+
+/* Send data out the IR blaster port(s) */
+static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+{
+	struct mceusb_dev *ir = priv;
+	int i, ret = 0;
+	int count, cmdcount = 0;
+	unsigned char *cmdbuf; /* MCE command buffer */
+	long signal_duration = 0; /* Singnal length in us */
+	struct timeval start_time, end_time;
+
+	do_gettimeofday(&start_time);
+
+	count = n / sizeof(int);
+
+	cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
+	if (!cmdbuf)
+		return -ENOMEM;
+
+	/* MCE tx init header */
+	cmdbuf[cmdcount++] = MCE_CONTROL_HEADER;
+	cmdbuf[cmdcount++] = 0x08;
+	cmdbuf[cmdcount++] = ir->tx_mask;
+
+	/* Generate mce packet data */
+	for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
+		signal_duration += txbuf[i];
+		txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
+
+		do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
+
+			/* Insert mce packet header every 4th entry */
+			if ((cmdcount < MCE_CMDBUF_SIZE) &&
+			    (cmdcount - MCE_TX_HEADER_LENGTH) %
+			     MCE_CODE_LENGTH == 0)
+				cmdbuf[cmdcount++] = MCE_PACKET_HEADER;
+
+			/* Insert mce packet data */
+			if (cmdcount < MCE_CMDBUF_SIZE)
+				cmdbuf[cmdcount++] =
+					(txbuf[i] < MCE_PULSE_BIT ?
+					 txbuf[i] : MCE_MAX_PULSE_LENGTH) |
+					 (i & 1 ? 0x00 : MCE_PULSE_BIT);
+			else {
+				ret = -EINVAL;
+				goto out;
+			}
+
+		} while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
+			 (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
+	}
+
+	/* Fix packet length in last header */
+	cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
+		0x80 + (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH - 1;
+
+	/* Check if we have room for the empty packet at the end */
+	if (cmdcount >= MCE_CMDBUF_SIZE) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* All mce commands end with an empty packet (0x80) */
+	cmdbuf[cmdcount++] = 0x80;
+
+	/* Transmit the command to the mce device */
+	mce_async_out(ir, cmdbuf, cmdcount);
+
+	/*
+	 * The lircd gap calculation expects the write function to
+	 * wait the time it takes for the ircommand to be sent before
+	 * it returns.
+	 */
+	do_gettimeofday(&end_time);
+	signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
+			   (end_time.tv_sec - start_time.tv_sec) * 1000000;
+
+	/* delay with the closest number of ticks */
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(signal_duration));
+
+out:
+	kfree(cmdbuf);
+	return ret ? ret : n;
+}
+
+/* Sets active IR outputs -- mce devices typically (all?) have two */
+static int mceusb_set_tx_mask(void *priv, u32 mask)
+{
+	struct mceusb_dev *ir = priv;
+
+	if (ir->flags.tx_mask_inverted)
+		ir->tx_mask = (mask != 0x03 ? mask ^ 0x03 : mask) << 1;
+	else
+		ir->tx_mask = mask;
+
+	return 0;
+}
+
+/* Sets the send carrier frequency and mode */
+static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+{
+	struct mceusb_dev *ir = priv;
+	int clk = 10000000;
+	int prescaler = 0, divisor = 0;
+	unsigned char cmdbuf[4] = { 0x9f, 0x06, 0x00, 0x00 };
+
+	/* Carrier has changed */
+	if (ir->carrier != carrier) {
+
+		if (carrier == 0) {
+			ir->carrier = carrier;
+			cmdbuf[2] = 0x01;
+			cmdbuf[3] = 0x80;
+			dev_dbg(ir->dev, "%s: disabling carrier "
+				"modulation\n", __func__);
+			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+			return carrier;
+		}
+
+		for (prescaler = 0; prescaler < 4; ++prescaler) {
+			divisor = (clk >> (2 * prescaler)) / carrier;
+			if (divisor <= 0xFF) {
+				ir->carrier = carrier;
+				cmdbuf[2] = prescaler;
+				cmdbuf[3] = divisor;
+				dev_dbg(ir->dev, "%s: requesting %u HZ "
+					"carrier\n", __func__, carrier);
+
+				/* Transmit new carrier to mce device */
+				mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+				return carrier;
+			}
+		}
+
+		return -EINVAL;
+
+	}
+
+	return carrier;
+}
+
+static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	int i, start_index = 0;
+	u8 hdr = MCE_CONTROL_HEADER;
+
+	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+	if (ir->flags.microsoft_gen1)
+		start_index = 2;
+
+	for (i = start_index; i < buf_len;) {
+		if (ir->rem == 0) {
+			/* decode mce packets of the form (84),AA,BB,CC,DD */
+			/* IR data packets can span USB messages - rem */
+			hdr = ir->buf_in[i];
+			ir->rem = (hdr & MCE_PACKET_LENGTH_MASK);
+			ir->cmd = (hdr & ~MCE_PACKET_LENGTH_MASK);
+			dev_dbg(ir->dev, "New data. rem: 0x%02x, cmd: 0x%02x\n",
+				ir->rem, ir->cmd);
+			i++;
+		}
+
+		/* don't process MCE commands */
+		if (hdr == MCE_CONTROL_HEADER || hdr == 0xff) {
+			ir->rem = 0;
+			return;
+		}
+
+		for (; (ir->rem > 0) && (i < buf_len); i++) {
+			ir->rem--;
+
+			rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
+			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
+					 * MCE_TIME_UNIT * 1000;
+
+			if ((ir->buf_in[i] & MCE_PULSE_MASK) == 0x7f) {
+				if (ir->rawir.pulse == rawir.pulse)
+					ir->rawir.duration += rawir.duration;
+				else {
+					ir->rawir.duration = rawir.duration;
+					ir->rawir.pulse = rawir.pulse;
+				}
+				continue;
+			}
+			rawir.duration += ir->rawir.duration;
+			ir->rawir.duration = 0;
+			ir->rawir.pulse = rawir.pulse;
+
+			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+
+			ir_raw_event_store(ir->idev, &rawir);
+		}
+
+		if (ir->buf_in[i] == 0x80 || ir->buf_in[i] == 0x9f)
+			ir->rem = 0;
+
+		dev_dbg(ir->dev, "calling ir_raw_event_handle\n");
+		ir_raw_event_handle(ir->idev);
+	}
+}
+
+static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
+{
+	struct mceusb_dev *ir;
+	int buf_len;
+
+	if (!urb)
+		return;
+
+	ir = urb->context;
+	if (!ir) {
+		usb_unlink_urb(urb);
+		return;
+	}
+
+	buf_len = urb->actual_length;
+
+	if (debug)
+		mceusb_dev_printdata(ir, urb->transfer_buffer, buf_len, false);
+
+	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+		ir->send_flags = SEND_FLAG_COMPLETE;
+		dev_dbg(&ir->irdev->dev, "setup answer received %d bytes\n",
+			buf_len);
+	}
+
+	switch (urb->status) {
+	/* success */
+	case 0:
+		mceusb_process_ir_data(ir, buf_len);
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		usb_unlink_urb(urb);
+		return;
+
+	case -EPIPE:
+	default:
+		break;
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void mceusb_gen1_init(struct mceusb_dev *ir)
+{
+	int ret;
+	int maxp = ir->len_in;
+	struct device *dev = ir->dev;
+	char *data;
+
+	data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
+	if (!data) {
+		dev_err(dev, "%s: memory allocation failed!\n", __func__);
+		return;
+	}
+
+	/*
+	 * This is a strange one. Windows issues a set address to the device
+	 * on the receive control pipe and expect a certain value pair back
+	 */
+	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
+			      data, USB_CTRL_MSG_SZ, HZ * 3);
+	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+		__func__, data[0], data[1]);
+
+	/* set feature: bit rate 38400 bps */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+			      0xc04e, 0x0000, NULL, 0, HZ * 3);
+
+	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+
+	/* bRequest 4: set char length to 8 bits */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      4, USB_TYPE_VENDOR,
+			      0x0808, 0x0000, NULL, 0, HZ * 3);
+	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+
+	/* bRequest 2: set handshaking to use DTR/DSR */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      2, USB_TYPE_VENDOR,
+			      0x0000, 0x0100, NULL, 0, HZ * 3);
+	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+
+	/* device reset */
+	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get hw/sw revision? */
+	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+	mce_sync_in(ir, NULL, maxp);
+
+	kfree(data);
+};
+
+static void mceusb_gen2_init(struct mceusb_dev *ir)
+{
+	int maxp = ir->len_in;
+
+	/* device reset */
+	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get hw/sw revision? */
+	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* unknown what the next two actually return... */
+	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
+	mce_sync_in(ir, NULL, maxp);
+	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
+	mce_sync_in(ir, NULL, maxp);
+}
+
+static void mceusb_get_parameters(struct mceusb_dev *ir)
+{
+	int maxp = ir->len_in;
+
+	/* get the carrier and frequency */
+	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get the transmitter bitmask */
+	mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get receiver timeout value */
+	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get receiver sensor setting */
+	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
+	mce_sync_in(ir, NULL, maxp);
+}
+
+static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+{
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	struct ir_input_dev *irdev;
+	struct device *dev = ir->dev;
+	int ret = -ENODEV;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(dev, "remote input dev allocation failed\n");
+		goto idev_alloc_failed;
+	}
+
+	ret = -ENOMEM;
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props) {
+		dev_err(dev, "remote ir dev props allocation failed\n");
+		goto props_alloc_failed;
+	}
+
+	irdev = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
+	if (!irdev) {
+		dev_err(dev, "remote ir input dev allocation failed\n");
+		goto ir_dev_alloc_failed;
+	}
+
+	snprintf(ir->name, sizeof(ir->name), "Media Center Ed. eHome "
+		 "Infrared Remote Transceiver (%04x:%04x)",
+		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
+		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
+
+	idev->name = ir->name;
+	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+	idev->phys = ir->phys;
+
+	props->priv = ir;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	props->allowed_protos = IR_TYPE_ALL;
+	props->s_tx_mask = mceusb_set_tx_mask;
+	props->s_tx_carrier = mceusb_set_tx_carrier;
+	props->tx_ir = mceusb_tx_ir;
+
+	ir->props = props;
+	ir->irdev = irdev;
+
+	input_set_drvdata(idev, irdev);
+
+	ret = ir_input_register(idev, RC_MAP_RC6_MCE, props, DRIVER_NAME);
+	if (ret < 0) {
+		dev_err(dev, "remote input device register failed\n");
+		goto irdev_failed;
+	}
+
+	return idev;
+
+irdev_failed:
+	kfree(irdev);
+ir_dev_alloc_failed:
+	kfree(props);
+props_alloc_failed:
+	input_free_device(idev);
+idev_alloc_failed:
+	return NULL;
+}
+
+static int __devinit mceusb_dev_probe(struct usb_interface *intf,
+				      const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *idesc;
+	struct usb_endpoint_descriptor *ep = NULL;
+	struct usb_endpoint_descriptor *ep_in = NULL;
+	struct usb_endpoint_descriptor *ep_out = NULL;
+	struct usb_host_config *config;
+	struct mceusb_dev *ir = NULL;
+	int pipe, maxp, i;
+	char buf[63], name[128] = "";
+	bool is_gen3;
+	bool is_microsoft_gen1;
+	bool tx_mask_inverted;
+
+	dev_dbg(&intf->dev, ": %s called\n", __func__);
+
+	config = dev->actconfig;
+	idesc  = intf->cur_altsetting;
+
+	is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
+	is_microsoft_gen1 = usb_match_id(intf, microsoft_gen1_list) ? 1 : 0;
+	tx_mask_inverted = usb_match_id(intf, std_tx_mask_list) ? 0 : 1;
+
+	/* step through the endpoints to find first bulk in and out endpoint */
+	for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
+		ep = &idesc->endpoint[i].desc;
+
+		if ((ep_in == NULL)
+			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+			    == USB_DIR_IN)
+			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_BULK)
+			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_INT))) {
+
+			ep_in = ep;
+			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+			ep_in->bInterval = 1;
+			dev_dbg(&intf->dev, ": acceptable inbound endpoint "
+				"found\n");
+		}
+
+		if ((ep_out == NULL)
+			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+			    == USB_DIR_OUT)
+			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_BULK)
+			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_INT))) {
+
+			ep_out = ep;
+			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+			ep_out->bInterval = 1;
+			dev_dbg(&intf->dev, ": acceptable outbound endpoint "
+				"found\n");
+		}
+	}
+	if (ep_in == NULL) {
+		dev_dbg(&intf->dev, ": inbound and/or endpoint not found\n");
+		return -ENODEV;
+	}
+
+	pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
+	if (!ir)
+		goto mem_alloc_fail;
+
+	ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+	if (!ir->buf_in)
+		goto buf_in_alloc_fail;
+
+	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ir->urb_in)
+		goto urb_in_alloc_fail;
+
+	ir->usbdev = dev;
+	ir->dev = &intf->dev;
+	ir->len_in = maxp;
+	ir->flags.microsoft_gen1 = is_microsoft_gen1;
+	ir->flags.tx_mask_inverted = tx_mask_inverted;
+
+	/* Saving usb interface data for use by the transmitter routine */
+	ir->usb_ep_in = ep_in;
+	ir->usb_ep_out = ep_out;
+
+	if (dev->descriptor.iManufacturer
+	    && usb_string(dev, dev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+	if (dev->descriptor.iProduct
+	    && usb_string(dev, dev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	ir->idev = mceusb_init_input_dev(ir);
+	if (!ir->idev)
+		goto input_dev_fail;
+
+	/* flush buffers on the device */
+	mce_sync_in(ir, NULL, maxp);
+	mce_sync_in(ir, NULL, maxp);
+
+	/* wire up inbound data handler */
+	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
+	ir->urb_in->transfer_dma = ir->dma_in;
+	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* initialize device */
+	if (ir->flags.microsoft_gen1)
+		mceusb_gen1_init(ir);
+	else if (!is_gen3)
+		mceusb_gen2_init(ir);
+
+	mceusb_get_parameters(ir);
+
+	mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+
+	usb_set_intfdata(intf, ir);
+
+	dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
+		 dev->bus->busnum, dev->devnum);
+
+	return 0;
+
+	/* Error-handling path */
+input_dev_fail:
+	usb_free_urb(ir->urb_in);
+urb_in_alloc_fail:
+	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
+buf_in_alloc_fail:
+	kfree(ir);
+mem_alloc_fail:
+	dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
+
+	return -ENOMEM;
+}
+
+
+static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	if (!ir)
+		return;
+
+	ir->usbdev = NULL;
+	ir_input_unregister(ir->idev);
+	usb_kill_urb(ir->urb_in);
+	usb_free_urb(ir->urb_in);
+	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+	kfree(ir);
+}
+
+static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+	dev_info(ir->dev, "suspend\n");
+	usb_kill_urb(ir->urb_in);
+	return 0;
+}
+
+static int mceusb_dev_resume(struct usb_interface *intf)
+{
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+	dev_info(ir->dev, "resume\n");
+	if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
+		return -EIO;
+	return 0;
+}
+
+static struct usb_driver mceusb_dev_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	mceusb_dev_probe,
+	.disconnect =	mceusb_dev_disconnect,
+	.suspend =	mceusb_dev_suspend,
+	.resume =	mceusb_dev_resume,
+	.reset_resume =	mceusb_dev_resume,
+	.id_table =	mceusb_dev_table
+};
+
+static int __init mceusb_dev_init(void)
+{
+	int ret;
+
+	ret = usb_register(&mceusb_dev_driver);
+	if (ret < 0)
+		printk(KERN_ERR DRIVER_NAME
+		       ": usb register failed, result = %d\n", ret);
+
+	return ret;
+}
+
+static void __exit mceusb_dev_exit(void)
+{
+	usb_deregister(&mceusb_dev_driver);
+}
+
+module_init(mceusb_dev_init);
+module_exit(mceusb_dev_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 7364b9642d0..4da2a54cb8b 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -57,7 +57,7 @@ void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
 	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
 }
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index 74e2b56ecb5..8224c301d05 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -375,7 +375,7 @@ static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
 
 static int vbi_open(struct saa7146_dev *dev, struct file *file)
 {
-	struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
+	struct saa7146_fh *fh = file->private_data;
 
 	u32 arbtr_ctrl	= saa7146_read(dev, PCI_BT_V1);
 	int ret = 0;
@@ -437,7 +437,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file)
 
 static void vbi_close(struct saa7146_dev *dev, struct file *file)
 {
-	struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
+	struct saa7146_fh *fh = file->private_data;
 	struct saa7146_vv *vv = dev->vv_data;
 	DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
 
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index b8b2c551a1e..a212a91a30f 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1370,7 +1370,7 @@ static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
 
 static int video_open(struct saa7146_dev *dev, struct file *file)
 {
-	struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
+	struct saa7146_fh *fh = file->private_data;
 	struct saa7146_format *sfmt;
 
 	fh->video_fmt.width = 384;
@@ -1394,7 +1394,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
 
 static void video_close(struct saa7146_dev *dev, struct file *file)
 {
-	struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
+	struct saa7146_fh *fh = file->private_data;
 	struct saa7146_vv *vv = dev->vv_data;
 	struct videobuf_queue *q = &fh->video_q;
 	int err;
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index b2e15456d5f..7955e49a344 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1249,7 +1249,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 				     struct tda18271_config *cfg)
 {
 	struct tda18271_priv *priv = NULL;
-	int instance;
+	int instance, ret;
 
 	mutex_lock(&tda18271_list_mutex);
 
@@ -1268,10 +1268,12 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 		priv->cal_initialized = false;
 		mutex_init(&priv->lock);
 
-		if (tda_fail(tda18271_get_id(fe)))
+		ret = tda18271_get_id(fe);
+		if (tda_fail(ret))
 			goto fail;
 
-		if (tda_fail(tda18271_assign_map_layout(fe)))
+		ret = tda18271_assign_map_layout(fe);
+		if (tda_fail(ret))
 			goto fail;
 
 		mutex_lock(&priv->lock);
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 8abbcc5fcf9..f8ee29e6059 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -524,6 +524,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 		buffer[3] = 0x39;
 		break;
 	case TUNER_PHILIPS_FQ1216LME_MK3:
+	case TUNER_PHILIPS_FQ1236_MK5:
 		tuner_err("This tuner doesn't have FM\n");
 		/* Set the low band for sanity, since it covers 88-108 MHz */
 		buffer[3] = 0x01;
@@ -545,14 +546,11 @@ static int simple_set_tv_freq(struct dvb_frontend *fe,
 	struct tuner_simple_priv *priv = fe->tuner_priv;
 	u8 config, cb;
 	u16 div;
-	struct tunertype *tun;
 	u8 buffer[4];
 	int rc, IFPCoff, i;
 	enum param_type desired_type;
 	struct tuner_params *t_params;
 
-	tun = priv->tun;
-
 	/* IFPCoff = Video Intermediate Frequency - Vif:
 		940  =16*58.75  NTSC/J (Japan)
 		732  =16*45.75  M/N STD
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index d9aaaca620c..58a513bcd74 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1353,6 +1353,17 @@ static struct tuner_params tuner_sony_btf_pxn01z_params[] = {
 	},
 };
 
+/* ------------ TUNER_PHILIPS_FQ1236_MK5 - Philips NTSC ------------ */
+
+static struct tuner_params tuner_philips_fq1236_mk5_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_NTSC,
+		.ranges = tuner_fm1236_mk3_ntsc_ranges,
+		.count  = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
+		.has_tda9887 = 1, /* TDA9885, no FM radio */
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1826,6 +1837,11 @@ struct tunertype tuners[] = {
 		.params = tuner_sony_btf_pxn01z_params,
 		.count  = ARRAY_SIZE(tuner_sony_btf_pxn01z_params),
 	},
+	[TUNER_PHILIPS_FQ1236_MK5] = { /* NTSC, TDA9885, no FM radio */
+		.name   = "Philips FQ1236 MK5",
+		.params = tuner_philips_fq1236_mk5_params,
+		.count  = ARRAY_SIZE(tuner_philips_fq1236_mk5_params),
+	},
 };
 EXPORT_SYMBOL(tuners);
 
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index 432003dded7..d2b2c12a556 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -217,6 +217,7 @@ static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 	return XC_RESULT_SUCCESS;
 }
 
+#if 0
 /* This routine is never used because the only time we read data from the
    i2c bus is when we read registers, and we want that to be an atomic i2c
    transaction in case we are on a multi-master bus */
@@ -231,6 +232,27 @@ static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 	}
 	return 0;
 }
+#endif
+
+static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
+{
+	u8 buf[2] = { reg >> 8, reg & 0xff };
+	u8 bval[2] = { 0, 0 };
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->i2c_props.addr,
+			.flags = 0, .buf = &buf[0], .len = 2 },
+		{ .addr = priv->i2c_props.addr,
+			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
+	};
+
+	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
+		printk(KERN_WARNING "xc5000: I2C read failed\n");
+		return -EREMOTEIO;
+	}
+
+	*val = (bval[0] << 8) | bval[1];
+	return XC_RESULT_SUCCESS;
+}
 
 static void xc_wait(int wait_ms)
 {
@@ -275,20 +297,14 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 	if (result == XC_RESULT_SUCCESS) {
 		/* wait for busy flag to clear */
 		while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
-			buf[0] = 0;
-			buf[1] = XREG_BUSY;
-
-			result = xc_send_i2c_data(priv, buf, 2);
+			result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
 			if (result == XC_RESULT_SUCCESS) {
-				result = xc_read_i2c_data(priv, buf, 2);
-				if (result == XC_RESULT_SUCCESS) {
-					if ((buf[0] == 0) && (buf[1] == 0)) {
-						/* busy flag cleared */
+				if ((buf[0] == 0) && (buf[1] == 0)) {
+					/* busy flag cleared */
 					break;
-					} else {
-						xc_wait(5); /* wait 5 ms */
-						WatchDogTimer--;
-					}
+				} else {
+					xc_wait(5); /* wait 5 ms */
+					WatchDogTimer--;
 				}
 			}
 		}
@@ -526,25 +542,6 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
 	return found;
 }
 
-static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
-{
-	u8 buf[2] = { reg >> 8, reg & 0xff };
-	u8 bval[2] = { 0, 0 };
-	struct i2c_msg msg[2] = {
-		{ .addr = priv->i2c_props.addr,
-			.flags = 0, .buf = &buf[0], .len = 2 },
-		{ .addr = priv->i2c_props.addr,
-			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
-	};
-
-	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
-		printk(KERN_WARNING "xc5000: I2C read failed\n");
-		return -EREMOTEIO;
-	}
-
-	*val = (bval[0] << 8) | bval[1];
-	return XC_RESULT_SUCCESS;
-}
 
 static int xc5000_fwupload(struct dvb_frontend *fe)
 {
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 770243c720d..cf870516284 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -565,7 +565,7 @@ static long dst_ca_ioctl(struct file *file, unsigned int cmd, unsigned long ioct
 	int result = 0;
 
 	lock_kernel();
-	dvbdev = (struct dvb_device *)file->private_data;
+	dvbdev = file->private_data;
 	state = (struct dst_state *)dvbdev->priv;
 	p_ca_message = kmalloc(sizeof (struct ca_msg), GFP_KERNEL);
 	p_ca_slot_info = kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL);
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index b762e561a6d..bca07c0bcd0 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -594,7 +594,7 @@ static irqreturn_t dm1105_irq(int irq, void *dev_id)
 int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
 {
 	struct input_dev *input_dev;
-	char *ir_codes = NULL;
+	char *ir_codes = RC_MAP_DM1105_NEC;
 	int err = -ENOMEM;
 
 	input_dev = input_allocate_device();
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 425862ffb28..0042306ea11 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -207,7 +207,7 @@ static int dvb_dvr_release(struct inode *inode, struct file *file)
 	}
 	/* TODO */
 	dvbdev->users--;
-	if(dvbdev->users==-1 && dmxdev->exit==1) {
+	if (dvbdev->users == 1 && dmxdev->exit == 1) {
 		fops_put(file->f_op);
 		file->f_op = NULL;
 		mutex_unlock(&dmxdev->mutex);
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index ef259a0718a..cb97e6b8543 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -1318,8 +1318,11 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 
 		fragbuf[0] = connection_id;
 		fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00;
-		if ((status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen)) != 0)
+		status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen);
+		if (status) {
+			status = -EFAULT;
 			goto exit;
+		}
 
 		timeout = jiffies + HZ / 2;
 		written = 0;
@@ -1494,8 +1497,11 @@ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
 
 	hdr[0] = slot;
 	hdr[1] = connection_id;
-	if ((status = copy_to_user(buf, hdr, 2)) != 0)
+	status = copy_to_user(buf, hdr, 2);
+	if (status) {
+		status = -EFAULT;
 		goto exit;
+	}
 	status = pktlen;
 
 exit:
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index 977ddba3e23..4a88a3e4db2 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -1130,13 +1130,9 @@ static int dvbdmx_write(struct dmx_demux *demux, const char __user *buf, size_t
 	if ((!demux->frontend) || (demux->frontend->source != DMX_MEMORY_FE))
 		return -EINVAL;
 
-	p = kmalloc(count, GFP_USER);
-	if (!p)
-		return -ENOMEM;
-	if (copy_from_user(p, buf, count)) {
-		kfree(p);
-		return -EFAULT;
-	}
+	p = memdup_user(buf, count);
+	if (IS_ERR(p))
+		return PTR_ERR(p);
 	if (mutex_lock_interruptible(&dvbdemux->mutex)) {
 		kfree(p);
 		return -ERESTARTSYS;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 44ae89ecef9..4d45b7d6b3f 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -465,7 +465,7 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
 	if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) {
 		fepriv->delay = fepriv->min_delay;
 
-		/* peform a tune */
+		/* perform a tune */
 		retval = dvb_frontend_swzigzag_autotune(fe,
 							fepriv->check_wrapped);
 		if (retval < 0) {
@@ -791,7 +791,7 @@ static int dvb_frontend_start(struct dvb_frontend *fe)
 	return 0;
 }
 
-static void dvb_frontend_get_frequeny_limits(struct dvb_frontend *fe,
+static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe,
 					u32 *freq_min, u32 *freq_max)
 {
 	*freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min);
@@ -815,7 +815,7 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe,
 	u32 freq_max;
 
 	/* range check: frequency */
-	dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max);
+	dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max);
 	if ((freq_min && parms->frequency < freq_min) ||
 	    (freq_max && parms->frequency > freq_max)) {
 		printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n",
@@ -1627,7 +1627,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 	case FE_GET_INFO: {
 		struct dvb_frontend_info* info = parg;
 		memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info));
-		dvb_frontend_get_frequeny_limits(fe, &info->frequency_min, &info->frequency_max);
+		dvb_frontend_get_frequency_limits(fe, &info->frequency_min, &info->frequency_max);
 
 		/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
 		 * do it, it is done for it. */
@@ -1726,7 +1726,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 			 * (stv0299 for instance) take longer than 8msec to
 			 * respond to a set_voltage command.  Those switches
 			 * need custom routines to switch properly.  For all
-			 * other frontends, the following shoule work ok.
+			 * other frontends, the following should work ok.
 			 * Dish network legacy switches (as used by Dish500)
 			 * are controlled by sending 9-bit command words
 			 * spaced 8msec apart.
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index f6dac2bb0ac..6c3a8a06cca 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -351,6 +351,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 	const u8 *ts, *ts_end, *from_where = NULL;
 	u8 ts_remain = 0, how_much = 0, new_ts = 1;
 	struct ethhdr *ethh = NULL;
+	bool error = false;
 
 #ifdef ULE_DEBUG
 	/* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */
@@ -460,10 +461,16 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 
 						/* Drop partly decoded SNDU, reset state, resync on PUSI. */
 						if (priv->ule_skb) {
-							dev_kfree_skb( priv->ule_skb );
+							error = true;
+							dev_kfree_skb(priv->ule_skb);
+						}
+
+						if (error || priv->ule_sndu_remain) {
 							dev->stats.rx_errors++;
 							dev->stats.rx_frame_errors++;
+							error = false;
 						}
+
 						reset_ule(priv);
 						priv->need_pusi = 1;
 						continue;
@@ -535,6 +542,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				from_where += 2;
 			}
 
+			priv->ule_sndu_remain = priv->ule_sndu_len + 2;
 			/*
 			 * State of current TS:
 			 *   ts_remain (remaining bytes in the current TS cell)
@@ -544,6 +552,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 			 */
 			switch (ts_remain) {
 				case 1:
+					priv->ule_sndu_remain--;
 					priv->ule_sndu_type = from_where[0] << 8;
 					priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */
 					ts_remain -= 1; from_where += 1;
@@ -557,6 +566,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				default: /* complete ULE header is present in current TS. */
 					/* Extract ULE type field. */
 					if (priv->ule_sndu_type_1) {
+						priv->ule_sndu_type_1 = 0;
 						priv->ule_sndu_type |= from_where[0];
 						from_where += 1; /* points to payload start. */
 						ts_remain -= 1;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e5f91f16ffa..553b48ac191 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -76,6 +76,7 @@ config DVB_USB_DIB0700
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
@@ -134,6 +135,7 @@ config DVB_USB_M920X
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -264,7 +266,7 @@ config DVB_USB_DW2102
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_MT312 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index b6cbb1dfc5f..a5c36372713 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -37,7 +37,7 @@ static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_pr
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_a800_table[] = {
+static struct ir_scancode ir_codes_a800_table[] = {
 	{ 0x0201, KEY_PROG1 },       /* SOURCE */
 	{ 0x0200, KEY_POWER },       /* POWER */
 	{ 0x0205, KEY_1 },           /* 1 */
@@ -146,10 +146,12 @@ static struct dvb_usb_device_properties a800_properties = {
 	.power_ctrl       = a800_power_ctrl,
 	.identify_state   = a800_identify_state,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_a800_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_a800_table),
-	.rc_query         = a800_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_a800_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_a800_table),
+		.rc_query         = a800_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index b41fa873b04..696207fe37e 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -33,7 +33,7 @@ MODULE_PARM_DESC(debug,
 
 #define deb_decode(args...)   dprintk(dvb_usb_af9005_remote_debug,0x01,args)
 
-struct dvb_usb_rc_key ir_codes_af9005_table[] = {
+struct ir_scancode ir_codes_af9005_table[] = {
 
 	{0x01b7, KEY_POWER},
 	{0x01a7, KEY_VOLUMEUP},
@@ -133,7 +133,7 @@ int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
 			for (i = 0; i < ir_codes_af9005_table_size; i++) {
 				if (rc5_custom(&ir_codes_af9005_table[i]) == cust
 				    && rc5_data(&ir_codes_af9005_table[i]) == dat) {
-					*event = ir_codes_af9005_table[i].event;
+					*event = ir_codes_af9005_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					deb_decode
 					    ("key pressed, event %x\n", *event);
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index cfd6107d534..8ecba8848bc 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -54,50 +54,6 @@ struct af9005_device_state {
 	int led_state;
 };
 
-static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen,
-			  u8 *rbuf, u16 rlen, int delay_ms)
-{
-	int actlen, ret = -ENOMEM;
-
-	if (wbuf == NULL || wlen == 0)
-		return -EINVAL;
-
-	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
-		return ret;
-
-	deb_xfer(">>> ");
-	debug_dump(wbuf, wlen, deb_xfer);
-
-	ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
-						    2), wbuf, wlen,
-			   &actlen, 2000);
-
-	if (ret)
-		err("bulk message failed: %d (%d/%d)", ret, wlen, actlen);
-	else
-		ret = actlen != wlen ? -1 : 0;
-
-	/* an answer is expected, and no error before */
-	if (!ret && rbuf && rlen) {
-		if (delay_ms)
-			msleep(delay_ms);
-
-		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
-							    0x01), rbuf,
-				   rlen, &actlen, 2000);
-
-		if (ret)
-			err("recv bulk message failed: %d", ret);
-		else {
-			deb_xfer("<<< ");
-			debug_dump(rbuf, actlen, deb_xfer);
-		}
-	}
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
 static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 			      int readwrite, int type, u8 * values, int len)
 {
@@ -146,7 +102,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 		obuf[8] = values[0];
 	obuf[7] = command;
 
-	ret = af9005_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
+	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
 	if (ret)
 		return ret;
 
@@ -534,7 +490,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
 	buf[6] = wlen;
 	for (i = 0; i < wlen; i++)
 		buf[7 + i] = wbuf[i];
-	ret = af9005_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
+	ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
 	if (ret)
 		return ret;
 	if (ibuf[2] != 0x27) {
@@ -581,7 +537,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
 
 	obuf[6] = len;
 	obuf[7] = address;
-	ret = af9005_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
+	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
 	if (ret)
 		return ret;
 	if (ibuf[2] != 0x2b) {
@@ -882,7 +838,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
 	obuf[2] = 0x40;		/* read remote */
 	obuf[3] = 1;		/* rest of packet length */
 	obuf[4] = st->sequence++;	/* sequence number */
-	ret = af9005_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
+	ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
 	if (ret) {
 		err("rc query failed");
 		return ret;
@@ -1069,10 +1025,15 @@ static struct dvb_usb_device_properties af9005_properties = {
 
 	.i2c_algo = &af9005_i2c_algo,
 
-	.rc_interval = 200,
-	.rc_key_map = NULL,
-	.rc_key_map_size = 0,
-	.rc_query = af9005_rc_query,
+	.rc.legacy = {
+		.rc_interval = 200,
+		.rc_key_map = NULL,
+		.rc_key_map_size = 0,
+		.rc_query = af9005_rc_query,
+	},
+
+	.generic_bulk_ctrl_endpoint          = 2,
+	.generic_bulk_ctrl_endpoint_response = 1,
 
 	.num_device_descs = 3,
 	.devices = {
@@ -1113,10 +1074,10 @@ static int __init af9005_usb_module_init(void)
 	rc_keys_size = symbol_request(ir_codes_af9005_table_size);
 	if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) {
 		err("af9005_rc_decode function not found, disabling remote");
-		af9005_properties.rc_query = NULL;
+		af9005_properties.rc.legacy.rc_query = NULL;
 	} else {
-		af9005_properties.rc_key_map = rc_keys;
-		af9005_properties.rc_key_map_size = *rc_keys_size;
+		af9005_properties.rc.legacy.rc_key_map = rc_keys;
+		af9005_properties.rc.legacy.rc_key_map_size = *rc_keys_size;
 	}
 
 	return 0;
diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h
index 088e7083a39..3c1fbd1c5d6 100644
--- a/drivers/media/dvb/dvb-usb/af9005.h
+++ b/drivers/media/dvb/dvb-usb/af9005.h
@@ -3490,7 +3490,7 @@ extern u8 regmask[8];
 /* remote control decoder */
 extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len,
 			    u32 * event, int *state);
-extern struct dvb_usb_rc_key ir_codes_af9005_table[];
+extern struct ir_scancode ir_codes_af9005_table[];
 extern int ir_codes_af9005_table_size;
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 66c7c3ea799..ea1ed3b4592 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -735,7 +735,7 @@ error:
 
 struct af9015_setup {
 	unsigned int id;
-	struct dvb_usb_rc_key *rc_key_map;
+	struct ir_scancode *rc_key_map;
 	unsigned int rc_key_map_size;
 	u8 *ir_table;
 	unsigned int ir_table_size;
@@ -847,8 +847,8 @@ static void af9015_set_remote_config(struct usb_device *udev,
 	}
 
 	if (table) {
-		props->rc_key_map = table->rc_key_map;
-		props->rc_key_map_size = table->rc_key_map_size;
+		props->rc.legacy.rc_key_map = table->rc_key_map;
+		props->rc.legacy.rc_key_map_size = table->rc_key_map_size;
 		af9015_config.ir_table = table->ir_table;
 		af9015_config.ir_table_size = table->ir_table_size;
 	}
@@ -878,8 +878,8 @@ static int af9015_read_config(struct usb_device *udev)
 	deb_info("%s: IR mode:%d\n", __func__, val);
 	for (i = 0; i < af9015_properties_count; i++) {
 		if (val == AF9015_IR_MODE_DISABLED) {
-			af9015_properties[i].rc_key_map = NULL;
-			af9015_properties[i].rc_key_map_size  = 0;
+			af9015_properties[i].rc.legacy.rc_key_map = NULL;
+			af9015_properties[i].rc.legacy.rc_key_map_size  = 0;
 		} else
 			af9015_set_remote_config(udev, &af9015_properties[i]);
 	}
@@ -1063,7 +1063,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 buf[8];
 	struct req_t req = {GET_IR_CODE, 0, 0, 0, 0, sizeof(buf), buf};
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	int i, ret;
 
 	memset(buf, 0, sizeof(buf));
@@ -1075,10 +1075,10 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
 		if (!buf[1] && rc5_custom(&keymap[i]) == buf[0] &&
 		    rc5_data(&keymap[i]) == buf[2]) {
-			*event = keymap[i].event;
+			*event = keymap[i].keycode;
 			*state = REMOTE_KEY_PRESSED;
 			break;
 		}
@@ -1299,6 +1299,7 @@ static struct usb_device_id af9015_usb_table[] = {
 	{USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV2000DS)},
 /* 30 */{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_UB383_T)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_395U_4)},
+	{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1353,8 +1354,10 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.identify_state = af9015_identify_state,
 
-		.rc_query         = af9015_rc_query,
-		.rc_interval      = 150,
+		.rc.legacy = {
+			.rc_query         = af9015_rc_query,
+			.rc_interval      = 150,
+		},
 
 		.i2c_algo = &af9015_i2c_algo,
 
@@ -1460,8 +1463,10 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.identify_state = af9015_identify_state,
 
-		.rc_query         = af9015_rc_query,
-		.rc_interval      = 150,
+		.rc.legacy = {
+			.rc_query         = af9015_rc_query,
+			.rc_interval      = 150,
+		},
 
 		.i2c_algo = &af9015_i2c_algo,
 
@@ -1567,12 +1572,14 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.identify_state = af9015_identify_state,
 
-		.rc_query         = af9015_rc_query,
-		.rc_interval      = 150,
+		.rc.legacy = {
+			.rc_query         = af9015_rc_query,
+			.rc_interval      = 150,
+		},
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 8, /* max 9 */
+		.num_device_descs = 9, /* max 9 */
 		.devices = {
 			{
 				.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1617,6 +1624,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[30], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "AverMedia AVerTV Volar M (A815Mac)",
+				.cold_ids = {&af9015_usb_table[32], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	},
 };
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 63b2a4907b7..c8e9349742e 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -123,7 +123,7 @@ enum af9015_remote {
 
 /* LeadTek - Y04G0051 */
 /* Leadtek WinFast DTV Dongle Gold */
-static struct dvb_usb_rc_key ir_codes_af9015_table_leadtek[] = {
+static struct ir_scancode ir_codes_af9015_table_leadtek[] = {
 	{ 0x001e, KEY_1 },
 	{ 0x001f, KEY_2 },
 	{ 0x0020, KEY_3 },
@@ -227,7 +227,7 @@ static u8 af9015_ir_table_leadtek[] = {
 };
 
 /* TwinHan AzureWave AD-TU700(704J) */
-static struct dvb_usb_rc_key ir_codes_af9015_table_twinhan[] = {
+static struct ir_scancode ir_codes_af9015_table_twinhan[] = {
 	{ 0x053f, KEY_POWER },
 	{ 0x0019, KEY_FAVORITES },    /* Favorite List */
 	{ 0x0004, KEY_TEXT },         /* Teletext */
@@ -338,7 +338,7 @@ static u8 af9015_ir_table_twinhan[] = {
 };
 
 /* A-Link DTU(m) */
-static struct dvb_usb_rc_key ir_codes_af9015_table_a_link[] = {
+static struct ir_scancode ir_codes_af9015_table_a_link[] = {
 	{ 0x001e, KEY_1 },
 	{ 0x001f, KEY_2 },
 	{ 0x0020, KEY_3 },
@@ -381,7 +381,7 @@ static u8 af9015_ir_table_a_link[] = {
 };
 
 /* MSI DIGIVOX mini II V3.0 */
-static struct dvb_usb_rc_key ir_codes_af9015_table_msi[] = {
+static struct ir_scancode ir_codes_af9015_table_msi[] = {
 	{ 0x001e, KEY_1 },
 	{ 0x001f, KEY_2 },
 	{ 0x0020, KEY_3 },
@@ -424,7 +424,7 @@ static u8 af9015_ir_table_msi[] = {
 };
 
 /* MYGICTV U718 */
-static struct dvb_usb_rc_key ir_codes_af9015_table_mygictv[] = {
+static struct ir_scancode ir_codes_af9015_table_mygictv[] = {
 	{ 0x003d, KEY_SWITCHVIDEOMODE },
 					  /* TV / AV */
 	{ 0x0545, KEY_POWER },
@@ -550,7 +550,7 @@ static u8 af9015_ir_table_kworld[] = {
 };
 
 /* AverMedia Volar X */
-static struct dvb_usb_rc_key ir_codes_af9015_table_avermedia[] = {
+static struct ir_scancode ir_codes_af9015_table_avermedia[] = {
 	{ 0x053d, KEY_PROG1 },       /* SOURCE */
 	{ 0x0512, KEY_POWER },       /* POWER */
 	{ 0x051e, KEY_1 },           /* 1 */
@@ -656,7 +656,7 @@ static u8 af9015_ir_table_avermedia_ks[] = {
 };
 
 /* Digittrade DVB-T USB Stick */
-static struct dvb_usb_rc_key ir_codes_af9015_table_digittrade[] = {
+static struct ir_scancode ir_codes_af9015_table_digittrade[] = {
 	{ 0x010f, KEY_LAST },	/* RETURN */
 	{ 0x0517, KEY_TEXT },	/* TELETEXT */
 	{ 0x0108, KEY_EPG },	/* EPG */
@@ -719,7 +719,7 @@ static u8 af9015_ir_table_digittrade[] = {
 };
 
 /* TREKSTOR DVB-T USB Stick */
-static struct dvb_usb_rc_key ir_codes_af9015_table_trekstor[] = {
+static struct ir_scancode ir_codes_af9015_table_trekstor[] = {
 	{ 0x0704, KEY_AGAIN },		/* Home */
 	{ 0x0705, KEY_MUTE },		/* Mute */
 	{ 0x0706, KEY_UP },			/* Up */
@@ -782,7 +782,7 @@ static u8 af9015_ir_table_trekstor[] = {
 };
 
 /* MSI DIGIVOX mini III */
-static struct dvb_usb_rc_key ir_codes_af9015_table_msi_digivox_iii[] = {
+static struct ir_scancode ir_codes_af9015_table_msi_digivox_iii[] = {
 	{ 0x0713, KEY_POWER },       /* [red power button] */
 	{ 0x073b, KEY_VIDEO },       /* Source */
 	{ 0x073e, KEY_ZOOM },        /* Zoom */
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index faca1ad88a6..4685259e161 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -377,7 +377,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 buf[] = {CMD_GET_IR_CODE};
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	u8 ircode[2];
 	int i, ret;
 
@@ -388,10 +388,10 @@ static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[0] &&
 		    rc5_data(&keymap[i]) == ircode[1]) {
-			*event = keymap[i].event;
+			*event = keymap[i].keycode;
 			*state = REMOTE_KEY_PRESSED;
 			return 0;
 		}
@@ -399,7 +399,7 @@ static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_anysee_table[] = {
+static struct ir_scancode ir_codes_anysee_table[] = {
 	{ 0x0100, KEY_0 },
 	{ 0x0101, KEY_1 },
 	{ 0x0102, KEY_2 },
@@ -463,6 +463,11 @@ static int anysee_probe(struct usb_interface *intf,
 	if (intf->num_altsetting < 1)
 		return -ENODEV;
 
+	/*
+	 * Anysee is always warm (its USB-bridge, Cypress FX2, uploads
+	 * firmware from eeprom).  If dvb_usb_device_init() succeeds that
+	 * means d is a valid pointer.
+	 */
 	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
 		adapter_nr);
 	if (ret)
@@ -479,10 +484,7 @@ static int anysee_probe(struct usb_interface *intf,
 	if (ret)
 		return ret;
 
-	if (d)
-		ret = anysee_init(d);
-
-	return ret;
+	return anysee_init(d);
 }
 
 static struct usb_device_id anysee_table[] = {
@@ -518,10 +520,12 @@ static struct dvb_usb_device_properties anysee_properties = {
 		}
 	},
 
-	.rc_key_map       = ir_codes_anysee_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_anysee_table),
-	.rc_query         = anysee_rc_query,
-	.rc_interval      = 200,  /* windows driver uses 500ms */
+	.rc.legacy = {
+		.rc_key_map       = ir_codes_anysee_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_anysee_table),
+		.rc_query         = anysee_rc_query,
+		.rc_interval      = 200,  /* windows driver uses 500ms */
+	},
 
 	.i2c_algo         = &anysee_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 6681ac1c56e..62c58288469 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -386,7 +386,7 @@ static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct dvb_usb_rc_key ir_codes_az6027_table[] = {
+static struct ir_scancode ir_codes_az6027_table[] = {
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
 };
@@ -1125,10 +1125,13 @@ static struct dvb_usb_device_properties az6027_properties = {
 	.power_ctrl       = az6027_power_ctrl,
 	.read_mac_address = az6027_read_mac_addr,
  */
-	.rc_key_map       = ir_codes_az6027_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_az6027_table),
-	.rc_interval      = 400,
-	.rc_query         = az6027_rc_query,
+	.rc.legacy = {
+		.rc_key_map       = ir_codes_az6027_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_az6027_table),
+		.rc_interval      = 400,
+		.rc_query         = az6027_rc_query,
+	},
+
 	.i2c_algo         = &az6027_i2c_algo,
 
 	.num_device_descs = 5,
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
index 5a9c14bdc98..4f5aa83fc1f 100644
--- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
@@ -84,7 +84,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_cinergyt2_table[] = {
+static struct ir_scancode ir_codes_cinergyt2_table[] = {
 	{ 0x0401, KEY_POWER },
 	{ 0x0402, KEY_1 },
 	{ 0x0403, KEY_2 },
@@ -217,10 +217,12 @@ static struct dvb_usb_device_properties cinergyt2_properties = {
 
 	.power_ctrl       = cinergyt2_power_ctrl,
 
-	.rc_interval      = 50,
-	.rc_key_map       = ir_codes_cinergyt2_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_cinergyt2_table),
-	.rc_query         = cinergyt2_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 50,
+		.rc_key_map       = ir_codes_cinergyt2_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_cinergyt2_table),
+		.rc_query         = cinergyt2_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 1,
 
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 0eb49088916..cd9f362c37b 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -385,7 +385,7 @@ static int cxusb_d680_dmb_streaming_ctrl(
 
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	u8 ircode[4];
 	int i;
 
@@ -394,10 +394,10 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[2] &&
 		    rc5_data(&keymap[i]) == ircode[3]) {
-			*event = keymap[i].event;
+			*event = keymap[i].keycode;
 			*state = REMOTE_KEY_PRESSED;
 
 			return 0;
@@ -410,7 +410,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 				    int *state)
 {
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	u8 ircode[4];
 	int i;
 	struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
@@ -422,10 +422,10 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1)
 		return 0;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[1] &&
 		    rc5_data(&keymap[i]) == ircode[2]) {
-			*event = keymap[i].event;
+			*event = keymap[i].keycode;
 			*state = REMOTE_KEY_PRESSED;
 
 			return 0;
@@ -438,7 +438,7 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 		int *state)
 {
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	u8 ircode[2];
 	int i;
 
@@ -448,10 +448,10 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
 		return 0;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[0] &&
 		    rc5_data(&keymap[i]) == ircode[1]) {
-			*event = keymap[i].event;
+			*event = keymap[i].keycode;
 			*state = REMOTE_KEY_PRESSED;
 
 			return 0;
@@ -461,7 +461,7 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_dvico_mce_table[] = {
+static struct ir_scancode ir_codes_dvico_mce_table[] = {
 	{ 0xfe02, KEY_TV },
 	{ 0xfe0e, KEY_MP3 },
 	{ 0xfe1a, KEY_DVD },
@@ -509,7 +509,7 @@ static struct dvb_usb_rc_key ir_codes_dvico_mce_table[] = {
 	{ 0xfe4e, KEY_POWER },
 };
 
-static struct dvb_usb_rc_key ir_codes_dvico_portable_table[] = {
+static struct ir_scancode ir_codes_dvico_portable_table[] = {
 	{ 0xfc02, KEY_SETUP },       /* Profile */
 	{ 0xfc43, KEY_POWER2 },
 	{ 0xfc06, KEY_EPG },
@@ -548,7 +548,7 @@ static struct dvb_usb_rc_key ir_codes_dvico_portable_table[] = {
 	{ 0xfc00, KEY_UNKNOWN },    /* HD */
 };
 
-static struct dvb_usb_rc_key ir_codes_d680_dmb_table[] = {
+static struct ir_scancode ir_codes_d680_dmb_table[] = {
 	{ 0x0038, KEY_UNKNOWN },	/* TV/AV */
 	{ 0x080c, KEY_ZOOM },
 	{ 0x0800, KEY_0 },
@@ -923,7 +923,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 		return -EIO;
 
 	/* try to determine if there is no IR decoder on the I2C bus */
-	for (i = 0; adap->dev->props.rc_key_map != NULL && i < 5; i++) {
+	for (i = 0; adap->dev->props.rc.legacy.rc_key_map != NULL && i < 5; i++) {
 		msleep(20);
 		if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1)
 			goto no_IR;
@@ -931,7 +931,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 			continue;
 		if (ircode[2] + ircode[3] != 0xff) {
 no_IR:
-			adap->dev->props.rc_key_map = NULL;
+			adap->dev->props.rc.legacy.rc_key_map = NULL;
 			info("No IR receiver detected on this device.");
 			break;
 		}
@@ -1026,8 +1026,10 @@ static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
 	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
 
 	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				 &cxusb_dualdig4_rev2_config) < 0)
+				     &cxusb_dualdig4_rev2_config) < 0) {
+		printk(KERN_WARNING "Unable to enumerate dib7000p\n");
 		return -ENODEV;
+	}
 
 	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
 			      &cxusb_dualdig4_rev2_config);
@@ -1449,10 +1451,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
 
 	.i2c_algo         = &cxusb_i2c_algo,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_portable_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_portable_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -1500,10 +1504,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
 
 	.i2c_algo         = &cxusb_i2c_algo,
 
-	.rc_interval      = 150,
-	.rc_key_map       = ir_codes_dvico_mce_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 150,
+		.rc_key_map       = ir_codes_dvico_mce_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -1559,10 +1565,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
 
 	.i2c_algo         = &cxusb_i2c_algo,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_portable_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_portable_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 	.num_device_descs = 1,
@@ -1609,10 +1617,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
 
 	.i2c_algo         = &cxusb_i2c_algo,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_portable_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_portable_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -1658,10 +1668,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_mce_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
-	.rc_query         = cxusb_bluebird2_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_mce_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_query         = cxusb_bluebird2_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
@@ -1706,10 +1718,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_portable_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
-	.rc_query         = cxusb_bluebird2_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_portable_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_query         = cxusb_bluebird2_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
@@ -1756,10 +1770,12 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_portable_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_portable_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
@@ -1847,10 +1863,12 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_dvico_mce_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
-	.rc_query         = cxusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_dvico_mce_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_query         = cxusb_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
@@ -1895,10 +1913,12 @@ static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_d680_dmb_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
-	.rc_query         = cxusb_d680_dmb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_d680_dmb_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_query         = cxusb_d680_dmb_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
@@ -1944,10 +1964,12 @@ static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_d680_dmb_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
-	.rc_query         = cxusb_d680_dmb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_d680_dmb_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_query         = cxusb_d680_dmb_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 83fc24a6c31..c2c9d236ec7 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -60,6 +60,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold);
+extern int dib0700_change_protocol(void *priv, u64 ir_type);
 
 extern int dib0700_device_count;
 extern int dvb_usb_dib0700_ir_proto;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 4f961d2d181..fe818348b8a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -13,10 +13,6 @@ int dvb_usb_dib0700_debug;
 module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
 
-int dvb_usb_dib0700_ir_proto = 1;
-module_param(dvb_usb_dib0700_ir_proto, int, 0644);
-MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6).");
-
 static int nb_packet_buffer_size = 21;
 module_param(nb_packet_buffer_size, int, 0644);
 MODULE_PARM_DESC(nb_packet_buffer_size,
@@ -53,7 +49,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
 	int status;
 
 	deb_data(">>> ");
-	debug_dump(tx,txlen,deb_data);
+	debug_dump(tx, txlen, deb_data);
 
 	status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
 		tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
@@ -98,7 +94,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
 		deb_info("ep 0 read error (status = %d)\n",status);
 
 	deb_data("<<< ");
-	debug_dump(rx,rxlen,deb_data);
+	debug_dump(rx, rxlen, deb_data);
 
 	return status; /* length in case of success */
 }
@@ -106,28 +102,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
 int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
 {
 	u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
-	return dib0700_ctrl_wr(d,buf,3);
+	return dib0700_ctrl_wr(d, buf, sizeof(buf));
 }
 
 static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
 {
-    struct dib0700_state *st = d->priv;
-    u8 b[3];
-    int ret;
-
-    if (st->fw_version >= 0x10201) {
-	b[0] = REQUEST_SET_USB_XFER_LEN;
-	b[1] = (nb_ts_packets >> 8)&0xff;
-	b[2] = nb_ts_packets & 0xff;
-
-	deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
-
-	ret = dib0700_ctrl_wr(d, b, 3);
-    } else {
-	deb_info("this firmware does not allow to change the USB xfer len\n");
-	ret = -EIO;
-    }
-    return ret;
+	struct dib0700_state *st = d->priv;
+	u8 b[3];
+	int ret;
+
+	if (st->fw_version >= 0x10201) {
+		b[0] = REQUEST_SET_USB_XFER_LEN;
+		b[1] = (nb_ts_packets >> 8) & 0xff;
+		b[2] = nb_ts_packets & 0xff;
+
+		deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
+
+		ret = dib0700_ctrl_wr(d, b, sizeof(b));
+	} else {
+		deb_info("this firmware does not allow to change the USB xfer len\n");
+		ret = -EIO;
+	}
+
+	return ret;
 }
 
 /*
@@ -178,7 +175,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 			value = ((en_start << 7) | (en_stop << 6) |
 				 (msg[i].len & 0x3F)) << 8 | i2c_dest;
 			/* I2C ctrl + FE bus; */
-			index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+			index = ((gen_mode << 6) & 0xC0) |
+				((bus_mode << 4) & 0x30);
 
 			result = usb_control_msg(d->udev,
 						 usb_rcvctrlpipe(d->udev, 0),
@@ -198,11 +196,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 		} else {
 			/* Write request */
 			buf[0] = REQUEST_NEW_I2C_WRITE;
-			buf[1] = (msg[i].addr << 1);
+			buf[1] = msg[i].addr << 1;
 			buf[2] = (en_start << 7) | (en_stop << 6) |
 				(msg[i].len & 0x3F);
 			/* I2C ctrl + FE bus; */
-			buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+			buf[3] = ((gen_mode << 6) & 0xC0) |
+				 ((bus_mode << 4) & 0x30);
 			/* The Actual i2c payload */
 			memcpy(&buf[4], msg[i].buf, msg[i].len);
 
@@ -240,7 +239,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 
 	for (i = 0; i < num; i++) {
 		/* fill in the address */
-		buf[1] = (msg[i].addr << 1);
+		buf[1] = msg[i].addr << 1;
 		/* fill the buffer */
 		memcpy(&buf[2], msg[i].buf, msg[i].len);
 
@@ -368,7 +367,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 	u8 buf[260];
 
 	while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
-		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
+		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
+				hx.addr, hx.len, hx.chk);
 
 		buf[0] = hx.len;
 		buf[1] = (hx.addr >> 8) & 0xff;
@@ -408,16 +408,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 				  REQUEST_GET_VERSION,
 				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 				  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
-	fw_version = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+	fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
 
 	/* set the buffer size - DVB-USB is allocating URB buffers
 	 * only after the firwmare download was successful */
 	for (i = 0; i < dib0700_device_count; i++) {
 		for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
 				adap_num++) {
-			if (fw_version >= 0x10201)
+			if (fw_version >= 0x10201) {
 				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
-			else {
+			} else {
 				/* for fw version older than 1.20.1,
 				 * the buffersize has to be n times 512 */
 				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
@@ -453,7 +453,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	if (st->disable_streaming_master_mode == 1)
 		b[2] = 0x00;
 	else
-		b[2] = (0x01 << 4); /* Master mode */
+		b[2] = 0x01 << 4; /* Master mode */
 
 	b[3] = 0x00;
 
@@ -466,11 +466,44 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 
 	b[2] |= st->channel_state;
 
-	deb_info("data for streaming: %x %x\n",b[1],b[2]);
+	deb_info("data for streaming: %x %x\n", b[1], b[2]);
 
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
+int dib0700_change_protocol(void *priv, u64 ir_type)
+{
+	struct dvb_usb_device *d = priv;
+	struct dib0700_state *st = d->priv;
+	u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
+	int new_proto, ret;
+
+	/* Set the IR mode */
+	if (ir_type == IR_TYPE_RC5)
+		new_proto = 1;
+	else if (ir_type == IR_TYPE_NEC)
+		new_proto = 0;
+	else if (ir_type == IR_TYPE_RC6) {
+		if (st->fw_version < 0x10200)
+			return -EINVAL;
+
+		new_proto = 2;
+	} else
+		return -EINVAL;
+
+	rc_setup[1] = new_proto;
+
+	ret = dib0700_ctrl_wr(d, rc_setup, sizeof(rc_setup));
+	if (ret < 0) {
+		err("ir protocol setup failed");
+		return ret;
+	}
+
+	d->props.rc.core.protocol = ir_type;
+
+	return ret;
+}
+
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY_V1_20 10
 
@@ -478,7 +511,13 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 struct dib0700_rc_response {
 	u8 report_id;
 	u8 data_state;
-	u16 system;
+	union {
+		u16 system16;
+		struct {
+			u8 system;
+			u8 not_system;
+		};
+	};
 	u8 data;
 	u8 not_data;
 };
@@ -487,14 +526,10 @@ struct dib0700_rc_response {
 static void dib0700_rc_urb_completion(struct urb *purb)
 {
 	struct dvb_usb_device *d = purb->context;
-	struct dvb_usb_rc_key *keymap;
 	struct dib0700_state *st;
-	struct dib0700_rc_response poll_reply;
-	u8 *buf;
-	int found = 0;
-	u32 event;
-	int state;
-	int i;
+	struct dib0700_rc_response *poll_reply;
+	u32 uninitialized_var(keycode);
+	u8 toggle;
 
 	deb_info("%s()\n", __func__);
 	if (d == NULL)
@@ -506,9 +541,8 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		return;
 	}
 
-	keymap = d->props.rc_key_map;
 	st = d->priv;
-	buf = (u8 *)purb->transfer_buffer;
+	poll_reply = purb->transfer_buffer;
 
 	if (purb->status < 0) {
 		deb_info("discontinuing polling\n");
@@ -521,104 +555,52 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		goto resubmit;
 	}
 
-	/* Set initial results in case we exit the function early */
-	event = 0;
-	state = REMOTE_NO_KEY_PRESSED;
-
-	deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0],
-		 buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length);
+	deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n",
+		 poll_reply->report_id, poll_reply->data_state,
+		 poll_reply->system, poll_reply->not_system,
+		 poll_reply->data, poll_reply->not_data,
+		 purb->actual_length);
 
-	switch (dvb_usb_dib0700_ir_proto) {
-	case 0:
-		/* NEC Protocol */
-		poll_reply.report_id  = 0;
-		poll_reply.data_state = 1;
-		poll_reply.system     = buf[2];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
+	switch (d->props.rc.core.protocol) {
+	case IR_TYPE_NEC:
+		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
-		    && (poll_reply.not_data == 0xff)) {
-			poll_reply.data_state = 2;
+		if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00)
+		    && (poll_reply->not_data == 0xff)) {
+			poll_reply->data_state = 2;
 			break;
 		}
+
+		if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
+			deb_data("NEC extended protocol\n");
+			/* NEC extended code - 24 bits */
+			keycode = poll_reply->system16 << 8 | poll_reply->data;
+		} else {
+			deb_data("NEC normal protocol\n");
+			/* normal NEC code - 16 bits */
+			keycode = poll_reply->system << 8 | poll_reply->data;
+		}
+
 		break;
 	default:
+		deb_data("RC5 protocol\n");
 		/* RC5 Protocol */
-		poll_reply.report_id  = buf[0];
-		poll_reply.data_state = buf[1];
-		poll_reply.system     = (buf[2] << 8) | buf[3];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
+		toggle = poll_reply->report_id;
+		keycode = poll_reply->system16 << 8 | poll_reply->data;
+
 		break;
 	}
 
-	if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+	if ((poll_reply->data + poll_reply->not_data) != 0xff) {
 		/* Key failed integrity check */
 		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply.system,
-		    poll_reply.data, poll_reply.not_data);
-		goto resubmit;
-	}
-
-	deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n",
-		 poll_reply.report_id, poll_reply.data_state,
-		 poll_reply.system, poll_reply.data, poll_reply.not_data);
-
-	/* Find the key in the map */
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
-		    rc5_data(&keymap[i]) == poll_reply.data) {
-			event = keymap[i].event;
-			found = 1;
-			break;
-		}
-	}
-
-	if (found == 0) {
-		err("Unknown remote controller key: %04x %02x %02x",
-		    poll_reply.system, poll_reply.data, poll_reply.not_data);
-		d->last_event = 0;
+		    poll_reply->system,
+		    poll_reply->data, poll_reply->not_data);
 		goto resubmit;
 	}
 
-	if (poll_reply.data_state == 1) {
-		/* New key hit */
-		st->rc_counter = 0;
-		event = keymap[i].event;
-		state = REMOTE_KEY_PRESSED;
-		d->last_event = keymap[i].event;
-	} else if (poll_reply.data_state == 2) {
-		/* Key repeated */
-		st->rc_counter++;
-
-		/* prevents unwanted double hits */
-		if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
-			event = d->last_event;
-			state = REMOTE_KEY_PRESSED;
-			st->rc_counter = RC_REPEAT_DELAY_V1_20;
-		}
-	} else {
-		err("Unknown data state [%d]", poll_reply.data_state);
-	}
-
-	switch (state) {
-	case REMOTE_NO_KEY_PRESSED:
-		break;
-	case REMOTE_KEY_PRESSED:
-		deb_info("key pressed\n");
-		d->last_event = event;
-	case REMOTE_KEY_REPEAT:
-		deb_info("key repeated\n");
-		input_event(d->rc_input_dev, EV_KEY, event, 1);
-		input_sync(d->rc_input_dev);
-		input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
-		input_sync(d->rc_input_dev);
-		break;
-	default:
-		break;
-	}
+	ir_keydown(d->rc_input_dev, keycode, toggle);
 
 resubmit:
 	/* Clean the buffer before we requeue */
@@ -631,21 +613,10 @@ resubmit:
 int dib0700_rc_setup(struct dvb_usb_device *d)
 {
 	struct dib0700_state *st = d->priv;
-	u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
 	struct urb *purb;
 	int ret;
-	int i;
-
-	if (d->props.rc_key_map == NULL)
-		return 0;
-
-	/* Set the IR mode */
-	i = dib0700_ctrl_wr(d, rc_setup, 3);
-	if (i<0) {
-		err("ir protocol setup failed");
-		return -1;
-	}
 
+	/* Poll-based. Don't initialize bulk mode */
 	if (st->fw_version < 0x10200)
 		return 0;
 
@@ -653,14 +624,14 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
 	purb = usb_alloc_urb(0, GFP_KERNEL);
 	if (purb == NULL) {
 		err("rc usb alloc urb failed\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
 	if (purb->transfer_buffer == NULL) {
 		err("rc kzalloc failed\n");
 		usb_free_urb(purb);
-		return -1;
+		return -ENOMEM;
 	}
 
 	purb->status = -EINPROGRESS;
@@ -669,12 +640,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
 			  dib0700_rc_urb_completion, d);
 
 	ret = usb_submit_urb(purb, GFP_ATOMIC);
-	if (ret != 0) {
+	if (ret)
 		err("rc submit urb failed\n");
-		return -1;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int dib0700_probe(struct usb_interface *intf,
@@ -698,6 +667,15 @@ static int dib0700_probe(struct usb_interface *intf,
 			st->fw_version = fw_version;
 			st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
 
+			/* Disable polling mode on newer firmwares */
+			if (st->fw_version >= 0x10200)
+				dev->props.rc.core.bulk_mode = true;
+			else
+				dev->props.rc.core.bulk_mode = false;
+
+			/* Need a higher delay, to avoid wrong repeat */
+			dev->rc_input_dev->rep[REP_DELAY] = 500;
+
 			dib0700_rc_setup(dev);
 
 			return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 800800a9649..f634d2e784b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -473,16 +473,19 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY 6
 
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+/*
+ * This function is used only when firmware is < 1.20 version. Newer
+ * firmwares use bulk mode, with functions implemented at dib0700_core,
+ * at dib0700_rc_urb_completion()
+ */
+static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 {
 	u8 key[4];
+	u32 keycode;
+	u8 toggle;
 	int i;
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
 	struct dib0700_state *st = d->priv;
 
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
 	if (st->fw_version >= 0x10200) {
 		/* For 1.20 firmware , We need to keep the RC polling
 		   callback so we can reuse the input device setup in
@@ -491,348 +494,45 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return 0;
 	}
 
-	i=dib0700_ctrl_rd(d,rc_request,2,key,4);
-	if (i<=0) {
+	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
+	if (i <= 0) {
 		err("RC Query Failed");
 		return -1;
 	}
 
 	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
-	if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0;
+	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
+		return 0;
 
 	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
 
 	dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
 
-	switch (dvb_usb_dib0700_ir_proto) {
-	case 0: {
+	d->last_event = 0;
+	switch (d->props.rc.core.protocol) {
+	case IR_TYPE_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
 		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
-		    (key[3] == 0xFF)) {
-			st->rc_counter++;
-			if (st->rc_counter > RC_REPEAT_DELAY) {
-				*event = d->last_event;
-				*state = REMOTE_KEY_PRESSED;
-				st->rc_counter = RC_REPEAT_DELAY;
-			}
-			return 0;
-		}
-		for (i=0;i<d->props.rc_key_map_size; i++) {
-			if (rc5_custom(&keymap[i]) == key[3-2] &&
-			    rc5_data(&keymap[i]) == key[3-3]) {
-				st->rc_counter = 0;
-				*event = keymap[i].event;
-				*state = REMOTE_KEY_PRESSED;
-				d->last_event = keymap[i].event;
-				return 0;
-			}
+		    (key[3] == 0xff))
+			keycode = d->last_event;
+		else {
+			keycode = key[3-2] << 8 | key[3-3];
+			d->last_event = keycode;
 		}
+
+		ir_keydown(d->rc_input_dev, keycode, 0);
 		break;
-	}
-	default: {
+	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
-		for (i = 0; i < d->props.rc_key_map_size; i++) {
-			if (rc5_custom(&keymap[i]) == key[3-2] &&
-			    rc5_data(&keymap[i]) == key[3-3]) {
-				if (d->last_event == keymap[i].event &&
-					key[3-1] == st->rc_toggle) {
-					st->rc_counter++;
-					/* prevents unwanted double hits */
-					if (st->rc_counter > RC_REPEAT_DELAY) {
-						*event = d->last_event;
-						*state = REMOTE_KEY_PRESSED;
-						st->rc_counter = RC_REPEAT_DELAY;
-					}
-
-					return 0;
-				}
-				st->rc_counter = 0;
-				*event = keymap[i].event;
-				*state = REMOTE_KEY_PRESSED;
-				st->rc_toggle = key[3-1];
-				d->last_event = keymap[i].event;
-				return 0;
-			}
-		}
+		keycode = key[3-2] << 8 | key[3-3];
+		toggle = key[3-1];
+		ir_keydown(d->rc_input_dev, keycode, toggle);
+
 		break;
 	}
-	}
-	err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]);
-	d->last_event = 0;
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_dib0700_table[] = {
-	/* Key codes for the tiny Pinnacle remote*/
-	{ 0x0700, KEY_MUTE },
-	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
-	{ 0x0739, KEY_POWER },
-	{ 0x0703, KEY_VOLUMEUP },
-	{ 0x0709, KEY_VOLUMEDOWN },
-	{ 0x0706, KEY_CHANNELUP },
-	{ 0x070c, KEY_CHANNELDOWN },
-	{ 0x070f, KEY_1 },
-	{ 0x0715, KEY_2 },
-	{ 0x0710, KEY_3 },
-	{ 0x0718, KEY_4 },
-	{ 0x071b, KEY_5 },
-	{ 0x071e, KEY_6 },
-	{ 0x0711, KEY_7 },
-	{ 0x0721, KEY_8 },
-	{ 0x0712, KEY_9 },
-	{ 0x0727, KEY_0 },
-	{ 0x0724, KEY_SCREEN }, /* 'Square' key */
-	{ 0x072a, KEY_TEXT },   /* 'T' key */
-	{ 0x072d, KEY_REWIND },
-	{ 0x0730, KEY_PLAY },
-	{ 0x0733, KEY_FASTFORWARD },
-	{ 0x0736, KEY_RECORD },
-	{ 0x073c, KEY_STOP },
-	{ 0x073f, KEY_CANCEL }, /* '?' key */
-	/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
-	{ 0xeb01, KEY_POWER },
-	{ 0xeb02, KEY_1 },
-	{ 0xeb03, KEY_2 },
-	{ 0xeb04, KEY_3 },
-	{ 0xeb05, KEY_4 },
-	{ 0xeb06, KEY_5 },
-	{ 0xeb07, KEY_6 },
-	{ 0xeb08, KEY_7 },
-	{ 0xeb09, KEY_8 },
-	{ 0xeb0a, KEY_9 },
-	{ 0xeb0b, KEY_VIDEO },
-	{ 0xeb0c, KEY_0 },
-	{ 0xeb0d, KEY_REFRESH },
-	{ 0xeb0f, KEY_EPG },
-	{ 0xeb10, KEY_UP },
-	{ 0xeb11, KEY_LEFT },
-	{ 0xeb12, KEY_OK },
-	{ 0xeb13, KEY_RIGHT },
-	{ 0xeb14, KEY_DOWN },
-	{ 0xeb16, KEY_INFO },
-	{ 0xeb17, KEY_RED },
-	{ 0xeb18, KEY_GREEN },
-	{ 0xeb19, KEY_YELLOW },
-	{ 0xeb1a, KEY_BLUE },
-	{ 0xeb1b, KEY_CHANNELUP },
-	{ 0xeb1c, KEY_VOLUMEUP },
-	{ 0xeb1d, KEY_MUTE },
-	{ 0xeb1e, KEY_VOLUMEDOWN },
-	{ 0xeb1f, KEY_CHANNELDOWN },
-	{ 0xeb40, KEY_PAUSE },
-	{ 0xeb41, KEY_HOME },
-	{ 0xeb42, KEY_MENU }, /* DVD Menu */
-	{ 0xeb43, KEY_SUBTITLE },
-	{ 0xeb44, KEY_TEXT }, /* Teletext */
-	{ 0xeb45, KEY_DELETE },
-	{ 0xeb46, KEY_TV },
-	{ 0xeb47, KEY_DVD },
-	{ 0xeb48, KEY_STOP },
-	{ 0xeb49, KEY_VIDEO },
-	{ 0xeb4a, KEY_AUDIO }, /* Music */
-	{ 0xeb4b, KEY_SCREEN }, /* Pic */
-	{ 0xeb4c, KEY_PLAY },
-	{ 0xeb4d, KEY_BACK },
-	{ 0xeb4e, KEY_REWIND },
-	{ 0xeb4f, KEY_FASTFORWARD },
-	{ 0xeb54, KEY_PREVIOUS },
-	{ 0xeb58, KEY_RECORD },
-	{ 0xeb5c, KEY_NEXT },
-
-	/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
-	{ 0x1e00, KEY_0 },
-	{ 0x1e01, KEY_1 },
-	{ 0x1e02, KEY_2 },
-	{ 0x1e03, KEY_3 },
-	{ 0x1e04, KEY_4 },
-	{ 0x1e05, KEY_5 },
-	{ 0x1e06, KEY_6 },
-	{ 0x1e07, KEY_7 },
-	{ 0x1e08, KEY_8 },
-	{ 0x1e09, KEY_9 },
-	{ 0x1e0a, KEY_KPASTERISK },
-	{ 0x1e0b, KEY_RED },
-	{ 0x1e0c, KEY_RADIO },
-	{ 0x1e0d, KEY_MENU },
-	{ 0x1e0e, KEY_GRAVE }, /* # */
-	{ 0x1e0f, KEY_MUTE },
-	{ 0x1e10, KEY_VOLUMEUP },
-	{ 0x1e11, KEY_VOLUMEDOWN },
-	{ 0x1e12, KEY_CHANNEL },
-	{ 0x1e14, KEY_UP },
-	{ 0x1e15, KEY_DOWN },
-	{ 0x1e16, KEY_LEFT },
-	{ 0x1e17, KEY_RIGHT },
-	{ 0x1e18, KEY_VIDEO },
-	{ 0x1e19, KEY_AUDIO },
-	{ 0x1e1a, KEY_MEDIA },
-	{ 0x1e1b, KEY_EPG },
-	{ 0x1e1c, KEY_TV },
-	{ 0x1e1e, KEY_NEXT },
-	{ 0x1e1f, KEY_BACK },
-	{ 0x1e20, KEY_CHANNELUP },
-	{ 0x1e21, KEY_CHANNELDOWN },
-	{ 0x1e24, KEY_LAST }, /* Skip backwards */
-	{ 0x1e25, KEY_OK },
-	{ 0x1e29, KEY_BLUE},
-	{ 0x1e2e, KEY_GREEN },
-	{ 0x1e30, KEY_PAUSE },
-	{ 0x1e32, KEY_REWIND },
-	{ 0x1e34, KEY_FASTFORWARD },
-	{ 0x1e35, KEY_PLAY },
-	{ 0x1e36, KEY_STOP },
-	{ 0x1e37, KEY_RECORD },
-	{ 0x1e38, KEY_YELLOW },
-	{ 0x1e3b, KEY_GOTO },
-	{ 0x1e3d, KEY_POWER },
-
-	/* Key codes for the Leadtek Winfast DTV Dongle */
-	{ 0x0042, KEY_POWER },
-	{ 0x077c, KEY_TUNER },
-	{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
-	{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
-	{ 0x0f71, KEY_DOT }, /* frequency */
-	{ 0x0743, KEY_0 },
-	{ 0x0c41, KEY_1 },
-	{ 0x0443, KEY_2 },
-	{ 0x0b7f, KEY_3 },
-	{ 0x0e41, KEY_4 },
-	{ 0x0643, KEY_5 },
-	{ 0x097f, KEY_6 },
-	{ 0x0d7e, KEY_7 },
-	{ 0x057c, KEY_8 },
-	{ 0x0a40, KEY_9 },
-	{ 0x0e4e, KEY_CLEAR },
-	{ 0x047c, KEY_CHANNEL }, /* show channel number */
-	{ 0x0f41, KEY_LAST }, /* recall */
-	{ 0x0342, KEY_MUTE },
-	{ 0x064c, KEY_RESERVED }, /* PIP button*/
-	{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
-	{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
-	{ 0x0b70, KEY_RECORD },
-	{ 0x037d, KEY_VOLUMEUP },
-	{ 0x017d, KEY_VOLUMEDOWN },
-	{ 0x0242, KEY_CHANNELUP },
-	{ 0x007d, KEY_CHANNELDOWN },
-
-	/* Key codes for Nova-TD "credit card" remote control. */
-	{ 0x1d00, KEY_0 },
-	{ 0x1d01, KEY_1 },
-	{ 0x1d02, KEY_2 },
-	{ 0x1d03, KEY_3 },
-	{ 0x1d04, KEY_4 },
-	{ 0x1d05, KEY_5 },
-	{ 0x1d06, KEY_6 },
-	{ 0x1d07, KEY_7 },
-	{ 0x1d08, KEY_8 },
-	{ 0x1d09, KEY_9 },
-	{ 0x1d0a, KEY_TEXT },
-	{ 0x1d0d, KEY_MENU },
-	{ 0x1d0f, KEY_MUTE },
-	{ 0x1d10, KEY_VOLUMEUP },
-	{ 0x1d11, KEY_VOLUMEDOWN },
-	{ 0x1d12, KEY_CHANNEL },
-	{ 0x1d14, KEY_UP },
-	{ 0x1d15, KEY_DOWN },
-	{ 0x1d16, KEY_LEFT },
-	{ 0x1d17, KEY_RIGHT },
-	{ 0x1d1c, KEY_TV },
-	{ 0x1d1e, KEY_NEXT },
-	{ 0x1d1f, KEY_BACK },
-	{ 0x1d20, KEY_CHANNELUP },
-	{ 0x1d21, KEY_CHANNELDOWN },
-	{ 0x1d24, KEY_LAST },
-	{ 0x1d25, KEY_OK },
-	{ 0x1d30, KEY_PAUSE },
-	{ 0x1d32, KEY_REWIND },
-	{ 0x1d34, KEY_FASTFORWARD },
-	{ 0x1d35, KEY_PLAY },
-	{ 0x1d36, KEY_STOP },
-	{ 0x1d37, KEY_RECORD },
-	{ 0x1d3b, KEY_GOTO },
-	{ 0x1d3d, KEY_POWER },
-
-	/* Key codes for the Pixelview SBTVD remote (proto NEC) */
-	{ 0x8613, KEY_MUTE },
-	{ 0x8612, KEY_POWER },
-	{ 0x8601, KEY_1 },
-	{ 0x8602, KEY_2 },
-	{ 0x8603, KEY_3 },
-	{ 0x8604, KEY_4 },
-	{ 0x8605, KEY_5 },
-	{ 0x8606, KEY_6 },
-	{ 0x8607, KEY_7 },
-	{ 0x8608, KEY_8 },
-	{ 0x8609, KEY_9 },
-	{ 0x8600, KEY_0 },
-	{ 0x860d, KEY_CHANNELUP },
-	{ 0x8619, KEY_CHANNELDOWN },
-	{ 0x8610, KEY_VOLUMEUP },
-	{ 0x860c, KEY_VOLUMEDOWN },
-
-	{ 0x860a, KEY_CAMERA },
-	{ 0x860b, KEY_ZOOM },
-	{ 0x861b, KEY_BACKSPACE },
-	{ 0x8615, KEY_ENTER },
-
-	{ 0x861d, KEY_UP },
-	{ 0x861e, KEY_DOWN },
-	{ 0x860e, KEY_LEFT },
-	{ 0x860f, KEY_RIGHT },
-
-	{ 0x8618, KEY_RECORD },
-	{ 0x861a, KEY_STOP },
-
-	/* Key codes for the EvolutePC TVWay+ remote (proto NEC) */
-	{ 0x7a00, KEY_MENU },
-	{ 0x7a01, KEY_RECORD },
-	{ 0x7a02, KEY_PLAY },
-	{ 0x7a03, KEY_STOP },
-	{ 0x7a10, KEY_CHANNELUP },
-	{ 0x7a11, KEY_CHANNELDOWN },
-	{ 0x7a12, KEY_VOLUMEUP },
-	{ 0x7a13, KEY_VOLUMEDOWN },
-	{ 0x7a40, KEY_POWER },
-	{ 0x7a41, KEY_MUTE },
-
-	/* Key codes for the Elgato EyeTV Diversity silver remote,
-	   set dvb_usb_dib0700_ir_proto=0 */
-	{ 0x4501, KEY_POWER },
-	{ 0x4502, KEY_MUTE },
-	{ 0x4503, KEY_1 },
-	{ 0x4504, KEY_2 },
-	{ 0x4505, KEY_3 },
-	{ 0x4506, KEY_4 },
-	{ 0x4507, KEY_5 },
-	{ 0x4508, KEY_6 },
-	{ 0x4509, KEY_7 },
-	{ 0x450a, KEY_8 },
-	{ 0x450b, KEY_9 },
-	{ 0x450c, KEY_LAST },
-	{ 0x450d, KEY_0 },
-	{ 0x450e, KEY_ENTER },
-	{ 0x450f, KEY_RED },
-	{ 0x4510, KEY_CHANNELUP },
-	{ 0x4511, KEY_GREEN },
-	{ 0x4512, KEY_VOLUMEDOWN },
-	{ 0x4513, KEY_OK },
-	{ 0x4514, KEY_VOLUMEUP },
-	{ 0x4515, KEY_YELLOW },
-	{ 0x4516, KEY_CHANNELDOWN },
-	{ 0x4517, KEY_BLUE },
-	{ 0x4518, KEY_LEFT }, /* Skip backwards */
-	{ 0x4519, KEY_PLAYPAUSE },
-	{ 0x451a, KEY_RIGHT }, /* Skip forward */
-	{ 0x451b, KEY_REWIND },
-	{ 0x451c, KEY_L }, /* Live */
-	{ 0x451d, KEY_FASTFORWARD },
-	{ 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
-	{ 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
-	{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
-	{ 0x4541, KEY_SCREEN }, /*  Full screen toggle, 'Hold' for Teletext */
-	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
-};
-
 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
 	BAND_UHF | BAND_VHF,
@@ -2168,10 +1868,17 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 2,
@@ -2197,10 +1904,17 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 2,
@@ -2251,11 +1965,17 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
-
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 1,
@@ -2288,10 +2008,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 1,
@@ -2358,11 +2086,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
-
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 1,
@@ -2397,11 +2132,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
-
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 2,
@@ -2431,7 +2173,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 7,
+		.num_device_descs = 6,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -2458,15 +2200,69 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[44], NULL },
 				{ NULL },
 			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach0,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}, {
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach1,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
 			{   "Elgato EyeTV Diversity",
 				{ &dib0700_usb_id_table[68], NULL },
 				{ NULL },
 			},
 		},
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 1,
@@ -2525,10 +2321,19 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
 		.adapter = {
@@ -2554,10 +2359,19 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
 		.adapter = {
@@ -2615,10 +2429,19 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
 		.adapter = {
@@ -2653,11 +2476,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
-
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 2,
 		.adapter = {
@@ -2697,10 +2527,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
 		.adapter = {
@@ -2728,10 +2566,18 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dib0700_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dib0700_table),
-		.rc_query         = dib0700_rc_query
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.rc_props = {
+				.allowed_protos = IR_TYPE_RC5 |
+						  IR_TYPE_RC6 |
+						  IR_TYPE_NEC,
+				.change_protocol = dib0700_change_protocol,
+			},
+		},
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index bc08bc0b723..ba991aa21af 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -327,7 +327,7 @@ EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
 /*
  * common remote control stuff
  */
-struct dvb_usb_rc_key ir_codes_dibusb_table[] = {
+struct ir_scancode ir_codes_dibusb_table[] = {
 	/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index eb2e6f050fb..8e3c0d2cce1 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -211,10 +211,12 @@ static struct dvb_usb_device_properties dibusb1_1_properties = {
 
 	.power_ctrl       = dibusb_power_ctrl,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_dibusb_table,
-	.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-	.rc_query         = dibusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_dibusb_table,
+		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_query         = dibusb_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
@@ -295,10 +297,12 @@ static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
 	},
 	.power_ctrl       = dibusb_power_ctrl,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_dibusb_table,
-	.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-	.rc_query         = dibusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_dibusb_table,
+		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_query         = dibusb_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
@@ -359,10 +363,12 @@ static struct dvb_usb_device_properties dibusb2_0b_properties = {
 	},
 	.power_ctrl       = dibusb2_0_power_ctrl,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_dibusb_table,
-	.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-	.rc_query         = dibusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_dibusb_table,
+		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_query         = dibusb_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
@@ -416,10 +422,12 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties = {
 	},
 	.power_ctrl       = dibusb2_0_power_ctrl,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_dibusb_table,
-	.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
-	.rc_query         = dibusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_dibusb_table,
+		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_query         = dibusb_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index 588308eb663..1cbc41cb4e8 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -81,10 +81,12 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
 	},
 	.power_ctrl       = dibusb2_0_power_ctrl,
 
-	.rc_interval      = DEFAULT_RC_INTERVAL,
-	.rc_key_map       = ir_codes_dibusb_table,
-	.rc_key_map_size  = 111, /* FIXME */
-	.rc_query         = dibusb_rc_query,
+	.rc.legacy = {
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = ir_codes_dibusb_table,
+		.rc_key_map_size  = 111, /* FIXME */
+		.rc_query         = dibusb_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h
index 3d50ac59088..61a6bf38947 100644
--- a/drivers/media/dvb/dvb-usb/dibusb.h
+++ b/drivers/media/dvb/dvb-usb/dibusb.h
@@ -124,7 +124,7 @@ extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int);
 #define DEFAULT_RC_INTERVAL 150
 //#define DEFAULT_RC_INTERVAL 100000
 
-extern struct dvb_usb_rc_key ir_codes_dibusb_table[];
+extern struct ir_scancode ir_codes_dibusb_table[];
 extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *);
 extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *);
 
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index e826077094f..13d006bb19d 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -161,7 +161,7 @@ static int digitv_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_digitv_table[] = {
+static struct ir_scancode ir_codes_digitv_table[] = {
 	{ 0x5f55, KEY_0 },
 	{ 0x6f55, KEY_1 },
 	{ 0x9f55, KEY_2 },
@@ -237,10 +237,10 @@ static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)
 	{
-		  for (i = 0; i < d->props.rc_key_map_size; i++) {
-			if (rc5_custom(&d->props.rc_key_map[i]) == key[1] &&
-			    rc5_data(&d->props.rc_key_map[i]) == key[2]) {
-				*event = d->props.rc_key_map[i].event;
+		  for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+			if (rc5_custom(&d->props.rc.legacy.rc_key_map[i]) == key[1] &&
+			    rc5_data(&d->props.rc.legacy.rc_key_map[i]) == key[2]) {
+				*event = d->props.rc.legacy.rc_key_map[i].keycode;
 				*state = REMOTE_KEY_PRESSED;
 				return 0;
 			}
@@ -310,10 +310,12 @@ static struct dvb_usb_device_properties digitv_properties = {
 	},
 	.identify_state   = digitv_identify_state,
 
-	.rc_interval      = 1000,
-	.rc_key_map       = ir_codes_digitv_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_digitv_table),
-	.rc_query         = digitv_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 1000,
+		.rc_key_map       = ir_codes_digitv_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_digitv_table),
+		.rc_query         = digitv_rc_query,
+	},
 
 	.i2c_algo         = &digitv_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index f57e59044d4..ca495e07f35 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -57,7 +57,7 @@ static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
 
 /* remote control */
 /* key list for the tiny remote control (Yakumo, don't know about the others) */
-static struct dvb_usb_rc_key ir_codes_dtt200u_table[] = {
+static struct ir_scancode ir_codes_dtt200u_table[] = {
 	{ 0x8001, KEY_MUTE },
 	{ 0x8002, KEY_CHANNELDOWN },
 	{ 0x8003, KEY_VOLUMEDOWN },
@@ -161,10 +161,12 @@ static struct dvb_usb_device_properties dtt200u_properties = {
 	},
 	.power_ctrl      = dtt200u_power_ctrl,
 
-	.rc_interval     = 300,
-	.rc_key_map      = ir_codes_dtt200u_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
-	.rc_query        = dtt200u_rc_query,
+	.rc.legacy = {
+		.rc_interval     = 300,
+		.rc_key_map      = ir_codes_dtt200u_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_query        = dtt200u_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -206,10 +208,12 @@ static struct dvb_usb_device_properties wt220u_properties = {
 	},
 	.power_ctrl      = dtt200u_power_ctrl,
 
-	.rc_interval     = 300,
-	.rc_key_map      = ir_codes_dtt200u_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
-	.rc_query        = dtt200u_rc_query,
+	.rc.legacy = {
+		.rc_interval     = 300,
+		.rc_key_map      = ir_codes_dtt200u_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_query        = dtt200u_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -251,10 +255,12 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
 	},
 	.power_ctrl      = dtt200u_power_ctrl,
 
-	.rc_interval     = 300,
-	.rc_key_map      = ir_codes_dtt200u_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
-	.rc_query        = dtt200u_rc_query,
+	.rc.legacy = {
+		.rc_interval     = 300,
+		.rc_key_map      = ir_codes_dtt200u_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_query        = dtt200u_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
@@ -296,10 +302,12 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 	},
 	.power_ctrl      = dtt200u_power_ctrl,
 
-	.rc_interval     = 300,
-	.rc_key_map      = ir_codes_dtt200u_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
-	.rc_query        = dtt200u_rc_query,
+	.rc.legacy = {
+		.rc_interval     = 300,
+		.rc_key_map      = ir_codes_dtt200u_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_query        = dtt200u_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 085c4e457e0..1a774d58d66 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -197,7 +197,9 @@
 #define USB_PID_AVERMEDIA_A310				0xa310
 #define USB_PID_AVERMEDIA_A850				0x850a
 #define USB_PID_AVERMEDIA_A805				0xa805
+#define USB_PID_AVERMEDIA_A815M				0x815a
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
+#define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index 5d91f70d2d2..2e3ea0fa28e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -15,7 +15,7 @@
 
 /* debug */
 int dvb_usb_debug;
-module_param_named(debug,dvb_usb_debug, int, 0644);
+module_param_named(debug, dvb_usb_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS);
 
 int dvb_usb_disable_rc_polling;
@@ -29,7 +29,7 @@ MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID
 static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 {
 	struct dvb_usb_adapter *adap;
-	int ret,n;
+	int ret, n;
 
 	for (n = 0; n < d->props.num_adapters; n++) {
 		adap = &d->adapter[n];
@@ -38,7 +38,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 
 		memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties));
 
-/* speed - when running at FULL speed we need a HW PID filter */
+		/* speed - when running at FULL speed we need a HW PID filter */
 		if (d->udev->speed == USB_SPEED_FULL && !(adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
 			err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)");
 			return -ENODEV;
@@ -46,7 +46,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 
 		if ((d->udev->speed == USB_SPEED_FULL && adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
 			(adap->props.caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
-			info("will use the device's hardware PID filter (table count: %d).",adap->props.pid_filter_count);
+			info("will use the device's hardware PID filter (table count: %d).", adap->props.pid_filter_count);
 			adap->pid_filtering  = 1;
 			adap->max_feed_count = adap->props.pid_filter_count;
 		} else {
@@ -64,9 +64,9 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 		}
 
 		if (adap->props.size_of_priv > 0) {
-			adap->priv = kzalloc(adap->props.size_of_priv,GFP_KERNEL);
+			adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL);
 			if (adap->priv == NULL) {
-				err("no memory for priv for adapter %d.",n);
+				err("no memory for priv for adapter %d.", n);
 				return -ENOMEM;
 			}
 		}
@@ -86,8 +86,8 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	 * sometimes a timeout occures, this helps
 	 */
 	if (d->props.generic_bulk_ctrl_endpoint != 0) {
-		usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint));
-		usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint));
+		usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
 	}
 
 	return 0;
@@ -96,6 +96,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
 {
 	int n;
+
 	for (n = 0; n < d->num_adapters_initialized; n++) {
 		dvb_usb_adapter_frontend_exit(&d->adapter[n]);
 		dvb_usb_adapter_dvb_exit(&d->adapter[n]);
@@ -111,11 +112,11 @@ static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
 /* general initialization functions */
 static int dvb_usb_exit(struct dvb_usb_device *d)
 {
-	deb_info("state before exiting everything: %x\n",d->state);
+	deb_info("state before exiting everything: %x\n", d->state);
 	dvb_usb_remote_exit(d);
 	dvb_usb_adapter_exit(d);
 	dvb_usb_i2c_exit(d);
-	deb_info("state should be zero now: %x\n",d->state);
+	deb_info("state should be zero now: %x\n", d->state);
 	d->state = DVB_USB_STATE_INIT;
 	kfree(d->priv);
 	kfree(d);
@@ -132,14 +133,14 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
 	d->state = DVB_USB_STATE_INIT;
 
 	if (d->props.size_of_priv > 0) {
-		d->priv = kzalloc(d->props.size_of_priv,GFP_KERNEL);
+		d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL);
 		if (d->priv == NULL) {
 			err("no memory for priv in 'struct dvb_usb_device'");
 			return -ENOMEM;
 		}
 	}
 
-/* check the capabilities and set appropriate variables */
+	/* check the capabilities and set appropriate variables */
 	dvb_usb_device_power_ctrl(d, 1);
 
 	if ((ret = dvb_usb_i2c_init(d)) ||
@@ -157,16 +158,17 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
 }
 
 /* determine the name and the state of the just found USB device */
-static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_device_properties *props, int *cold)
+static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold)
 {
-	int i,j;
+	int i, j;
 	struct dvb_usb_device_description *desc = NULL;
+
 	*cold = -1;
 
 	for (i = 0; i < props->num_device_descs; i++) {
 
 		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) {
-			deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
+			deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
 			if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) &&
 				props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
 				*cold = 1;
@@ -179,7 +181,7 @@ static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device
 			break;
 
 		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) {
-			deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
+			deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
 			if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
 				props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
 				*cold = 0;
@@ -190,7 +192,7 @@ static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device
 	}
 
 	if (desc != NULL && props->identify_state != NULL)
-		props->identify_state(udev,props,&desc,cold);
+		props->identify_state(udev, props, &desc, cold);
 
 	return desc;
 }
@@ -202,7 +204,7 @@ int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff)
 	else
 		d->powered--;
 
-	if (d->powered == 0 || (onoff && d->powered == 1)) { // when switching from 1 to 0 or from 0 to 1
+	if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */
 		deb_info("power control: %d\n", onoff);
 		if (d->props.power_ctrl)
 			return d->props.power_ctrl(d, onoff);
@@ -222,32 +224,32 @@ int dvb_usb_device_init(struct usb_interface *intf,
 	struct dvb_usb_device *d = NULL;
 	struct dvb_usb_device_description *desc = NULL;
 
-	int ret = -ENOMEM,cold=0;
+	int ret = -ENOMEM, cold = 0;
 
 	if (du != NULL)
 		*du = NULL;
 
-	if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) {
+	if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) {
 		deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n");
 		return -ENODEV;
 	}
 
 	if (cold) {
-		info("found a '%s' in cold state, will try to load a firmware",desc->name);
-		ret = dvb_usb_download_firmware(udev,props);
+		info("found a '%s' in cold state, will try to load a firmware", desc->name);
+		ret = dvb_usb_download_firmware(udev, props);
 		if (!props->no_reconnect || ret != 0)
 			return ret;
 	}
 
-	info("found a '%s' in warm state.",desc->name);
-		d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
+	info("found a '%s' in warm state.", desc->name);
+	d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
 	if (d == NULL) {
 		err("no memory for 'struct dvb_usb_device'");
 		return -ENOMEM;
 	}
 
 	d->udev = udev;
-	memcpy(&d->props,props,sizeof(struct dvb_usb_device_properties));
+	memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
 	d->desc = desc;
 	d->owner = owner;
 
@@ -259,9 +261,9 @@ int dvb_usb_device_init(struct usb_interface *intf,
 	ret = dvb_usb_init(d, adapter_nums);
 
 	if (ret == 0)
-		info("%s successfully initialized and connected.",desc->name);
+		info("%s successfully initialized and connected.", desc->name);
 	else
-		info("%s error while loading driver (%d)",desc->name,ret);
+		info("%s error while loading driver (%d)", desc->name, ret);
 	return ret;
 }
 EXPORT_SYMBOL(dvb_usb_device_init);
@@ -271,12 +273,12 @@ void dvb_usb_device_exit(struct usb_interface *intf)
 	struct dvb_usb_device *d = usb_get_intfdata(intf);
 	const char *name = "generic DVB-USB module";
 
-	usb_set_intfdata(intf,NULL);
+	usb_set_intfdata(intf, NULL);
 	if (d != NULL && d->desc != NULL) {
 		name = d->desc->name;
 		dvb_usb_exit(d);
 	}
-	info("%s successfully deinitialized and disconnected.",name);
+	info("%s successfully deinitialized and disconnected.", name);
 
 }
 EXPORT_SYMBOL(dvb_usb_device_exit);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 852fe89539c..b579fed3ab3 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -8,29 +8,29 @@
 #include "dvb-usb-common.h"
 #include <linux/usb/input.h>
 
-static int dvb_usb_getkeycode(struct input_dev *dev,
+static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
 				unsigned int scancode, unsigned int *keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	int i;
 
 	/* See if we can match the raw key code. */
-	for (i = 0; i < d->props.rc_key_map_size; i++)
-		if (keymap[i].scan == scancode) {
-			*keycode = keymap[i].event;
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+		if (keymap[i].scancode == scancode) {
+			*keycode = keymap[i].keycode;
 			return 0;
 		}
 
 	/*
 	 * If is there extra space, returns KEY_RESERVED,
-	 * otherwise, input core won't let dvb_usb_setkeycode
+	 * otherwise, input core won't let legacy_dvb_usb_setkeycode
 	 * to work
 	 */
-	for (i = 0; i < d->props.rc_key_map_size; i++)
-		if (keymap[i].event == KEY_RESERVED ||
-		    keymap[i].event == KEY_UNKNOWN) {
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+		if (keymap[i].keycode == KEY_RESERVED ||
+		    keymap[i].keycode == KEY_UNKNOWN) {
 			*keycode = KEY_RESERVED;
 			return 0;
 		}
@@ -38,27 +38,27 @@ static int dvb_usb_getkeycode(struct input_dev *dev,
 	return -EINVAL;
 }
 
-static int dvb_usb_setkeycode(struct input_dev *dev,
+static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
 				unsigned int scancode, unsigned int keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	int i;
 
 	/* Search if it is replacing an existing keycode */
-	for (i = 0; i < d->props.rc_key_map_size; i++)
-		if (keymap[i].scan == scancode) {
-			keymap[i].event = keycode;
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+		if (keymap[i].scancode == scancode) {
+			keymap[i].keycode = keycode;
 			return 0;
 		}
 
 	/* Search if is there a clean entry. If so, use it */
-	for (i = 0; i < d->props.rc_key_map_size; i++)
-		if (keymap[i].event == KEY_RESERVED ||
-		    keymap[i].event == KEY_UNKNOWN) {
-			keymap[i].scan = scancode;
-			keymap[i].event = keycode;
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+		if (keymap[i].keycode == KEY_RESERVED ||
+		    keymap[i].keycode == KEY_UNKNOWN) {
+			keymap[i].scancode = scancode;
+			keymap[i].keycode = keycode;
 			return 0;
 		}
 
@@ -78,7 +78,7 @@ static int dvb_usb_setkeycode(struct input_dev *dev,
  *
  * TODO: Fix the repeat rate of the input device.
  */
-static void dvb_usb_read_remote_control(struct work_struct *work)
+static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
 {
 	struct dvb_usb_device *d =
 		container_of(work, struct dvb_usb_device, rc_query_work.work);
@@ -92,7 +92,7 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 	if (dvb_usb_disable_rc_polling)
 		return;
 
-	if (d->props.rc_query(d,&event,&state)) {
+	if (d->props.rc.legacy.rc_query(d,&event,&state)) {
 		err("error while querying for an remote control event.");
 		goto schedule;
 	}
@@ -151,18 +151,117 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 */
 
 schedule:
-	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
+	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
+}
+
+static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d,
+				      struct input_dev *input_dev)
+{
+	int i, err, rc_interval;
+
+	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
+	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
+
+	/* set the bits for the keys */
+	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_key_map_size);
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+		deb_rc("setting bit for event %d item %d\n",
+			d->props.rc.legacy.rc_key_map[i].keycode, i);
+		set_bit(d->props.rc.legacy.rc_key_map[i].keycode, input_dev->keybit);
+	}
+
+	/* setting these two values to non-zero, we have to manage key repeats */
+	input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval;
+	input_dev->rep[REP_DELAY]  = d->props.rc.legacy.rc_interval + 150;
+
+	input_set_drvdata(input_dev, d);
+
+	err = input_register_device(input_dev);
+	if (err)
+		input_free_device(input_dev);
+
+	rc_interval = d->props.rc.legacy.rc_interval;
+
+	INIT_DELAYED_WORK(&d->rc_query_work, legacy_dvb_usb_read_remote_control);
+
+	info("schedule remote query interval to %d msecs.", rc_interval);
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(rc_interval));
+
+	d->state |= DVB_USB_STATE_REMOTE;
+
+	return err;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+ * whether the remote control has received anything.
+ *
+ * TODO: Fix the repeat rate of the input device.
+ */
+static void dvb_usb_read_remote_control(struct work_struct *work)
+{
+	struct dvb_usb_device *d =
+		container_of(work, struct dvb_usb_device, rc_query_work.work);
+	int err;
+
+	/* TODO: need a lock here.  We can simply skip checking for the remote control
+	   if we're busy. */
+
+	/* when the parameter has been set to 1 via sysfs while the
+	 * driver was running, or when bulk mode is enabled after IR init
+	 */
+	if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode)
+		return;
+
+	err = d->props.rc.core.rc_query(d);
+	if (err)
+		err("error %d while querying for an remote control event.", err);
+
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(d->props.rc.core.rc_interval));
+}
+
+static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
+				       struct input_dev *input_dev)
+{
+	int err, rc_interval;
+
+	d->props.rc.core.rc_props.priv = d;
+	err = ir_input_register(input_dev,
+				 d->props.rc.core.rc_codes,
+				 &d->props.rc.core.rc_props,
+				 d->props.rc.core.module_name);
+	if (err < 0)
+		return err;
+
+	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
+		return 0;
+
+	/* Polling mode - initialize a work queue for handling it */
+	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
+
+	rc_interval = d->props.rc.core.rc_interval;
+
+	info("schedule remote query interval to %d msecs.", rc_interval);
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(rc_interval));
+
+	return 0;
 }
 
 int dvb_usb_remote_init(struct dvb_usb_device *d)
 {
 	struct input_dev *input_dev;
-	int i;
 	int err;
 
-	if (d->props.rc_key_map == NULL ||
-		d->props.rc_query == NULL ||
-		dvb_usb_disable_rc_polling)
+	if (dvb_usb_disable_rc_polling)
+		return 0;
+
+	if (d->props.rc.legacy.rc_key_map && d->props.rc.legacy.rc_query)
+		d->props.rc.mode = DVB_RC_LEGACY;
+	else if (d->props.rc.core.rc_codes)
+		d->props.rc.mode = DVB_RC_CORE;
+	else
 		return 0;
 
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
@@ -177,39 +276,19 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	input_dev->phys = d->rc_phys;
 	usb_to_input_id(d->udev, &input_dev->id);
 	input_dev->dev.parent = &d->udev->dev;
-	input_dev->getkeycode = dvb_usb_getkeycode;
-	input_dev->setkeycode = dvb_usb_setkeycode;
-
-	/* set the bits for the keys */
-	deb_rc("key map size: %d\n", d->props.rc_key_map_size);
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
-		deb_rc("setting bit for event %d item %d\n",
-			d->props.rc_key_map[i].event, i);
-		set_bit(d->props.rc_key_map[i].event, input_dev->keybit);
-	}
 
 	/* Start the remote-control polling. */
-	if (d->props.rc_interval < 40)
-		d->props.rc_interval = 100; /* default */
-
-	/* setting these two values to non-zero, we have to manage key repeats */
-	input_dev->rep[REP_PERIOD] = d->props.rc_interval;
-	input_dev->rep[REP_DELAY]  = d->props.rc_interval + 150;
-
-	input_set_drvdata(input_dev, d);
-
-	err = input_register_device(input_dev);
-	if (err) {
-		input_free_device(input_dev);
-		return err;
-	}
+	if (d->props.rc.legacy.rc_interval < 40)
+		d->props.rc.legacy.rc_interval = 100; /* default */
 
 	d->rc_input_dev = input_dev;
 
-	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
-
-	info("schedule remote query interval to %d msecs.", d->props.rc_interval);
-	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
+	if (d->props.rc.mode == DVB_RC_LEGACY)
+		err = legacy_dvb_usb_remote_init(d, input_dev);
+	else
+		err = rc_core_dvb_usb_remote_init(d, input_dev);
+	if (err)
+		return err;
 
 	d->state |= DVB_USB_STATE_REMOTE;
 
@@ -221,7 +300,10 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d)
 	if (d->state & DVB_USB_STATE_REMOTE) {
 		cancel_rearming_delayed_work(&d->rc_query_work);
 		flush_scheduled_work();
-		input_unregister_device(d->rc_input_dev);
+		if (d->props.rc.mode == DVB_RC_LEGACY)
+			input_unregister_device(d->rc_input_dev);
+		else
+			ir_input_unregister(d->rc_input_dev);
 	}
 	d->state &= ~DVB_USB_STATE_REMOTE;
 	return 0;
@@ -234,7 +316,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 		u8 keybuf[5], u32 *event, int *state)
 {
 	int i;
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 	switch (keybuf[0]) {
@@ -247,10 +329,10 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 				break;
 			}
 			/* See if we can match the raw key code. */
-			for (i = 0; i < d->props.rc_key_map_size; i++)
+			for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
 				if (rc5_custom(&keymap[i]) == keybuf[1] &&
 					rc5_data(&keymap[i]) == keybuf[3]) {
-					*event = keymap[i].event;
+					*event = keymap[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					return 0;
 				}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 4a9f676087b..34f7b3ba8cc 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -14,6 +14,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
+#include <media/ir-core.h>
 
 #include "dvb_frontend.h"
 #include "dvb_demux.h"
@@ -74,30 +75,19 @@ struct dvb_usb_device_description {
 	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
 };
 
-/**
- * struct dvb_usb_rc_key - a remote control key and its input-event
- * @custom: the vendor/custom part of the key
- * @data: the actual key part
- * @event: the input event assigned to key identified by custom and data
- */
-struct dvb_usb_rc_key {
-	u16 scan;
-	u32 event;
-};
-
-static inline u8 rc5_custom(struct dvb_usb_rc_key *key)
+static inline u8 rc5_custom(struct ir_scancode *key)
 {
-	return (key->scan >> 8) & 0xff;
+	return (key->scancode >> 8) & 0xff;
 }
 
-static inline u8 rc5_data(struct dvb_usb_rc_key *key)
+static inline u8 rc5_data(struct ir_scancode *key)
 {
-	return key->scan & 0xff;
+	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct dvb_usb_rc_key *key)
+static inline u8 rc5_scan(struct ir_scancode *key)
 {
-	return key->scan & 0xffff;
+	return key->scancode & 0xffff;
 }
 
 struct dvb_usb_device;
@@ -168,6 +158,55 @@ struct dvb_usb_adapter_properties {
 };
 
 /**
+ * struct dvb_rc_legacy - old properties of remote controller
+ * @rc_key_map: a hard-wired array of struct ir_scancode (NULL to disable
+ *  remote control handling).
+ * @rc_key_map_size: number of items in @rc_key_map.
+ * @rc_query: called to query an event event.
+ * @rc_interval: time in ms between two queries.
+ */
+struct dvb_rc_legacy {
+/* remote control properties */
+#define REMOTE_NO_KEY_PRESSED      0x00
+#define REMOTE_KEY_PRESSED         0x01
+#define REMOTE_KEY_REPEAT          0x02
+	struct ir_scancode  *rc_key_map;
+	int rc_key_map_size;
+	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
+	int rc_interval;
+};
+
+/**
+ * struct dvb_rc properties of remote controller, using rc-core
+ * @rc_codes: name of rc codes table
+ * @protocol: type of protocol(s) currently used by the driver
+ * @rc_query: called to query an event event.
+ * @rc_interval: time in ms between two queries.
+ * @rc_props: remote controller properties
+ * @bulk_mode: device supports bulk mode for RC (disable polling mode)
+ */
+struct dvb_rc {
+	char *rc_codes;
+	u64 protocol;
+	char *module_name;
+	int (*rc_query) (struct dvb_usb_device *d);
+	int rc_interval;
+	struct ir_dev_props rc_props;
+	bool bulk_mode;				/* uses bulk mode */
+};
+
+/**
+ * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one
+ *		       based on rc-core
+ * This is initialized/used only inside dvb-usb-remote.c.
+ * It shouldn't be set by the drivers.
+ */
+enum dvb_usb_mode {
+	DVB_RC_LEGACY,
+	DVB_RC_CORE,
+};
+
+/**
  * struct dvb_usb_device_properties - properties of a dvb-usb-device
  * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
  *  download.
@@ -185,11 +224,7 @@ struct dvb_usb_adapter_properties {
  * @identify_state: called to determine the state (cold or warm), when it
  *  is not distinguishable by the USB IDs.
  *
- * @rc_key_map: a hard-wired array of struct dvb_usb_rc_key (NULL to disable
- *  remote control handling).
- * @rc_key_map_size: number of items in @rc_key_map.
- * @rc_query: called to query an event event.
- * @rc_interval: time in ms between two queries.
+ * @rc: remote controller properties
  *
  * @i2c_algo: i2c_algorithm if the device has I2CoverUSB.
  *
@@ -233,14 +268,11 @@ struct dvb_usb_device_properties {
 	int (*identify_state)   (struct usb_device *, struct dvb_usb_device_properties *,
 			struct dvb_usb_device_description **, int *);
 
-/* remote control properties */
-#define REMOTE_NO_KEY_PRESSED      0x00
-#define REMOTE_KEY_PRESSED         0x01
-#define REMOTE_KEY_REPEAT          0x02
-	struct dvb_usb_rc_key  *rc_key_map;
-	int rc_key_map_size;
-	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
-	int rc_interval;
+	struct {
+		enum dvb_usb_mode mode;	/* Drivers shouldn't touch on it */
+		struct dvb_rc_legacy legacy;
+		struct dvb_rc core;
+	} rc;
 
 	struct i2c_algorithm *i2c_algo;
 
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index e8fb8538067..774df88dc6e 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -74,7 +74,7 @@
 		"on firmware-problems."
 
 struct ir_codes_dvb_usb_table_table {
-	struct dvb_usb_rc_key *rc_keys;
+	struct ir_scancode *rc_keys;
 	int rc_keys_size;
 };
 
@@ -948,7 +948,7 @@ static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_dw210x_table[] = {
+static struct ir_scancode ir_codes_dw210x_table[] = {
 	{ 0xf80a, KEY_Q },		/*power*/
 	{ 0xf80c, KEY_M },		/*mute*/
 	{ 0xf811, KEY_1 },
@@ -982,7 +982,7 @@ static struct dvb_usb_rc_key ir_codes_dw210x_table[] = {
 	{ 0xf81b, KEY_B },		/*recall*/
 };
 
-static struct dvb_usb_rc_key ir_codes_tevii_table[] = {
+static struct ir_scancode ir_codes_tevii_table[] = {
 	{ 0xf80a, KEY_POWER },
 	{ 0xf80c, KEY_MUTE },
 	{ 0xf811, KEY_1 },
@@ -1032,7 +1032,7 @@ static struct dvb_usb_rc_key ir_codes_tevii_table[] = {
 	{ 0xf858, KEY_SWITCHVIDEOMODE },
 };
 
-static struct dvb_usb_rc_key ir_codes_tbs_table[] = {
+static struct ir_scancode ir_codes_tbs_table[] = {
 	{ 0xf884, KEY_POWER },
 	{ 0xf894, KEY_MUTE },
 	{ 0xf887, KEY_1 },
@@ -1075,8 +1075,8 @@ static struct ir_codes_dvb_usb_table_table keys_tables[] = {
 
 static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
-	int keymap_size = d->props.rc_key_map_size;
+	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	int keymap_size = d->props.rc.legacy.rc_key_map_size;
 	u8 key[2];
 	struct i2c_msg msg = {
 		.addr = DW2102_RC_QUERY,
@@ -1096,7 +1096,7 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		for (i = 0; i < keymap_size ; i++) {
 			if (rc5_data(&keymap[i]) == msg.buf[0]) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = keymap[i].event;
+				*event = keymap[i].keycode;
 				break;
 			}
 
@@ -1185,13 +1185,13 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
 		case USB_PID_PROF_1100:
-			s6x0_properties.rc_key_map = ir_codes_tbs_table;
-			s6x0_properties.rc_key_map_size =
+			s6x0_properties.rc.legacy.rc_key_map = ir_codes_tbs_table;
+			s6x0_properties.rc.legacy.rc_key_map_size =
 					ARRAY_SIZE(ir_codes_tbs_table);
 			break;
 		case USB_PID_TEVII_S650:
-			dw2104_properties.rc_key_map = ir_codes_tevii_table;
-			dw2104_properties.rc_key_map_size =
+			dw2104_properties.rc.legacy.rc_key_map = ir_codes_tevii_table;
+			dw2104_properties.rc.legacy.rc_key_map_size =
 					ARRAY_SIZE(ir_codes_tevii_table);
 		case USB_PID_DW2104:
 			reset = 1;
@@ -1255,10 +1255,13 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2102_serit_i2c_algo,
-	.rc_key_map = ir_codes_dw210x_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
-	.rc_interval = 150,
-	.rc_query = dw2102_rc_query,
+
+	.rc.legacy = {
+		.rc_key_map = ir_codes_dw210x_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_interval = 150,
+		.rc_query = dw2102_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x81,
 	/* parameter for the MPEG2-data transfer */
@@ -1306,10 +1309,12 @@ static struct dvb_usb_device_properties dw2104_properties = {
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2104_i2c_algo,
-	.rc_key_map = ir_codes_dw210x_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
-	.rc_interval = 150,
-	.rc_query = dw2102_rc_query,
+	.rc.legacy = {
+		.rc_key_map = ir_codes_dw210x_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_interval = 150,
+		.rc_query = dw2102_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x81,
 	/* parameter for the MPEG2-data transfer */
@@ -1353,10 +1358,12 @@ static struct dvb_usb_device_properties dw3101_properties = {
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw3101_i2c_algo,
-	.rc_key_map = ir_codes_dw210x_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
-	.rc_interval = 150,
-	.rc_query = dw2102_rc_query,
+	.rc.legacy = {
+		.rc_key_map = ir_codes_dw210x_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_interval = 150,
+		.rc_query = dw2102_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x81,
 	/* parameter for the MPEG2-data transfer */
@@ -1396,10 +1403,12 @@ static struct dvb_usb_device_properties s6x0_properties = {
 	.no_reconnect = 1,
 
 	.i2c_algo = &s6x0_i2c_algo,
-	.rc_key_map = ir_codes_tevii_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_tevii_table),
-	.rc_interval = 150,
-	.rc_query = dw2102_rc_query,
+	.rc.legacy = {
+		.rc_key_map = ir_codes_tevii_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_tevii_table),
+		.rc_interval = 150,
+		.rc_query = dw2102_rc_query,
+	},
 
 	.generic_bulk_ctrl_endpoint = 0x81,
 	.num_adapters = 1,
@@ -1459,8 +1468,8 @@ static int dw2102_probe(struct usb_interface *intf,
 	/* fill only different fields */
 	p7500->firmware = "dvb-usb-p7500.fw";
 	p7500->devices[0] = d7500;
-	p7500->rc_key_map = ir_codes_tbs_table;
-	p7500->rc_key_map_size = ARRAY_SIZE(ir_codes_tbs_table);
+	p7500->rc.legacy.rc_key_map = ir_codes_tbs_table;
+	p7500->rc.legacy.rc_key_map_size = ARRAY_SIZE(ir_codes_tbs_table);
 	p7500->adapter->frontend_attach = prof_7500_frontend_attach;
 
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
index 7a7f1b2b681..dbdb5347b2a 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
@@ -349,7 +349,7 @@ static struct dvb_frontend_ops gp8psk_fe_ops = {
 			 * FE_CAN_QAM_16 is for compatibility
 			 * (Myth incorrectly detects Turbo-QPSK as plain QAM-16)
 			 */
-			FE_CAN_QPSK | FE_CAN_QAM_16
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC
 	},
 
 	.release = gp8psk_fe_release,
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index c211fef45fc..bdef1a18b66 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -69,7 +69,7 @@ static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
 	int adap_enabled[M9206_MAX_ADAPTERS] = { 0 };
 
 	/* Remote controller init. */
-	if (d->props.rc_query) {
+	if (d->props.rc.legacy.rc_query) {
 		deb("Initialising remote control\n");
 		while (rc_seq->address) {
 			if ((ret = m920x_write(d->udev, M9206_CORE,
@@ -142,9 +142,9 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
 		goto unlock;
 
-	for (i = 0; i < d->props.rc_key_map_size; i++)
-		if (rc5_data(&d->props.rc_key_map[i]) == rc_state[1]) {
-			*event = d->props.rc_key_map[i].event;
+	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+		if (rc5_data(&d->props.rc.legacy.rc_key_map[i]) == rc_state[1]) {
+			*event = d->props.rc.legacy.rc_key_map[i].keycode;
 
 			switch(rc_state[0]) {
 			case 0x80:
@@ -589,7 +589,7 @@ static struct m920x_inits pinnacle310e_init[] = {
 };
 
 /* ir keymaps */
-static struct dvb_usb_rc_key ir_codes_megasky_table [] = {
+static struct ir_scancode ir_codes_megasky_table[] = {
 	{ 0x0012, KEY_POWER },
 	{ 0x001e, KEY_CYCLEWINDOWS }, /* min/max */
 	{ 0x0002, KEY_CHANNELUP },
@@ -608,7 +608,7 @@ static struct dvb_usb_rc_key ir_codes_megasky_table [] = {
 	{ 0x000e, KEY_COFFEE }, /* "MTS" */
 };
 
-static struct dvb_usb_rc_key ir_codes_tvwalkertwin_table [] = {
+static struct ir_scancode ir_codes_tvwalkertwin_table[] = {
 	{ 0x0001, KEY_ZOOM }, /* Full Screen */
 	{ 0x0002, KEY_CAMERA }, /* snapshot */
 	{ 0x0003, KEY_MUTE },
@@ -628,7 +628,7 @@ static struct dvb_usb_rc_key ir_codes_tvwalkertwin_table [] = {
 	{ 0x001e, KEY_VOLUMEUP },
 };
 
-static struct dvb_usb_rc_key ir_codes_pinnacle310e_table[] = {
+static struct ir_scancode ir_codes_pinnacle310e_table[] = {
 	{ 0x16, KEY_POWER },
 	{ 0x17, KEY_FAVORITES },
 	{ 0x0f, KEY_TEXT },
@@ -784,10 +784,12 @@ static struct dvb_usb_device_properties megasky_properties = {
 	.firmware = "dvb-usb-megasky-02.fw",
 	.download_firmware = m920x_firmware_download,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_megasky_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_megasky_table),
-	.rc_query         = m920x_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_megasky_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_megasky_table),
+		.rc_query         = m920x_rc_query,
+	},
 
 	.size_of_priv     = sizeof(struct m920x_state),
 
@@ -885,10 +887,12 @@ static struct dvb_usb_device_properties tvwalkertwin_properties = {
 	.firmware = "dvb-usb-tvwalkert.fw",
 	.download_firmware = m920x_firmware_download,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_tvwalkertwin_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_tvwalkertwin_table),
-	.rc_query         = m920x_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_tvwalkertwin_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_tvwalkertwin_table),
+		.rc_query         = m920x_rc_query,
+	},
 
 	.size_of_priv     = sizeof(struct m920x_state),
 
@@ -992,10 +996,12 @@ static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.download_firmware = NULL,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_pinnacle310e_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_pinnacle310e_table),
-	.rc_query         = m920x_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_pinnacle310e_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_pinnacle310e_table),
+		.rc_query         = m920x_rc_query,
+	},
 
 	.size_of_priv     = sizeof(struct m920x_state),
 
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index d195a587cc6..181f36a12e2 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -21,7 +21,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define deb_ee(args...) dprintk(debug,0x02,args)
 
 /* Hauppauge NOVA-T USB2 keys */
-static struct dvb_usb_rc_key ir_codes_haupp_table [] = {
+static struct ir_scancode ir_codes_haupp_table[] = {
 	{ 0x1e00, KEY_0 },
 	{ 0x1e01, KEY_1 },
 	{ 0x1e02, KEY_2 },
@@ -98,7 +98,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 					deb_rc("c: %x, d: %x\n", rc5_data(&ir_codes_haupp_table[i]),
 								 rc5_custom(&ir_codes_haupp_table[i]));
 
-					*event = ir_codes_haupp_table[i].event;
+					*event = ir_codes_haupp_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					if (st->old_toggle == toggle) {
 						if (st->last_repeat_count++ < 2)
@@ -195,10 +195,12 @@ static struct dvb_usb_device_properties nova_t_properties = {
 	.power_ctrl       = dibusb2_0_power_ctrl,
 	.read_mac_address = nova_t_read_mac_address,
 
-	.rc_interval      = 100,
-	.rc_key_map       = ir_codes_haupp_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_haupp_table),
-	.rc_query         = nova_t_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 100,
+		.rc_key_map       = ir_codes_haupp_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_haupp_table),
+		.rc_query         = nova_t_rc_query,
+	},
 
 	.i2c_algo         = &dibusb_i2c_algo,
 
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index dfb81ff1d9a..6b22ec64ab0 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -331,7 +331,7 @@ static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
-static struct dvb_usb_rc_key ir_codes_opera1_table[] = {
+static struct ir_scancode ir_codes_opera1_table[] = {
 	{0x5fa0, KEY_1},
 	{0x51af, KEY_2},
 	{0x5da2, KEY_3},
@@ -407,9 +407,9 @@ static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
 		for (i = 0; i < ARRAY_SIZE(ir_codes_opera1_table); i++) {
 			if (rc5_scan(&ir_codes_opera1_table[i]) == (send_key & 0xffff)) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = ir_codes_opera1_table[i].event;
+				*event = ir_codes_opera1_table[i].keycode;
 				opst->last_key_pressed =
-					ir_codes_opera1_table[i].event;
+					ir_codes_opera1_table[i].keycode;
 				break;
 			}
 			opst->last_key_pressed = 0;
@@ -498,10 +498,12 @@ static struct dvb_usb_device_properties opera1_properties = {
 	.power_ctrl = opera1_power_ctrl,
 	.i2c_algo = &opera1_i2c_algo,
 
-	.rc_key_map = ir_codes_opera1_table,
-	.rc_key_map_size = ARRAY_SIZE(ir_codes_opera1_table),
-	.rc_interval = 200,
-	.rc_query = opera1_rc_query,
+	.rc.legacy = {
+		.rc_key_map = ir_codes_opera1_table,
+		.rc_key_map_size = ARRAY_SIZE(ir_codes_opera1_table),
+		.rc_interval = 200,
+		.rc_query = opera1_rc_query,
+	},
 	.read_mac_address = opera1_read_mac_address,
 	.generic_bulk_ctrl_endpoint = 0x00,
 	/* parameter for the MPEG2-data transfer */
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index 20ca9d9ee99..a6de489a6a3 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -29,6 +29,8 @@
 
 #include "tda826x.h"
 #include "tda10086.h"
+#include "tda1002x.h"
+#include "tda827x.h"
 #include "lnbp21.h"
 
 /* debug */
@@ -150,7 +152,17 @@ static struct tda10086_config tda10086_config = {
 	.xtal_freq = TDA10086_XTAL_16M,
 };
 
-static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xa511,
+};
+
+static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
 {
 	if (usb_set_interface(adap->dev->udev,0,3) < 0)
 		err("set interface to alts=3 failed");
@@ -163,7 +175,27 @@ static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
+		err("set interface to alts=3 failed");
+	if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
+		deb_info("TDA10023 attach failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
+{
+	if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
+		printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
 {
 	if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
 		deb_info("TDA8263 attach failed\n");
@@ -180,6 +212,7 @@ static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
 /* DVB USB Driver stuff */
 static struct dvb_usb_device_properties ttusb2_properties;
 static struct dvb_usb_device_properties ttusb2_properties_s2400;
+static struct dvb_usb_device_properties ttusb2_properties_ct3650;
 
 static int ttusb2_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
@@ -187,6 +220,8 @@ static int ttusb2_probe(struct usb_interface *intf,
 	if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
 				     THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
 				     THIS_MODULE, NULL, adapter_nr))
 		return 0;
 	return -ENODEV;
@@ -197,6 +232,8 @@ static struct usb_device_id ttusb2_table [] = {
 	{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
 	{ USB_DEVICE(USB_VID_TECHNOTREND,
 		USB_PID_TECHNOTREND_CONNECT_S2400) },
+	{ USB_DEVICE(USB_VID_TECHNOTREND,
+		USB_PID_TECHNOTREND_CONNECT_CT3650) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, ttusb2_table);
@@ -214,8 +251,8 @@ static struct dvb_usb_device_properties ttusb2_properties = {
 		{
 			.streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
 
-			.frontend_attach  = ttusb2_frontend_attach,
-			.tuner_attach     = ttusb2_tuner_attach,
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
 
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
@@ -266,8 +303,8 @@ static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
 		{
 			.streaming_ctrl   = NULL,
 
-			.frontend_attach  = ttusb2_frontend_attach,
-			.tuner_attach     = ttusb2_tuner_attach,
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
 
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
@@ -301,6 +338,52 @@ static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
 	}
 };
 
+static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = NULL,
+
+			.frontend_attach  = ttusb2_frontend_tda10023_attach,
+			.tuner_attach = ttusb2_tuner_tda827x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		},
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "Technotrend TT-connect CT-3650",
+			.warm_ids = { &ttusb2_table[3], NULL },
+		},
+	}
+};
+
 static struct usb_driver ttusb2_driver = {
 	.name		= "dvb_usb_ttusb2",
 	.probe		= ttusb2_probe,
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 4d332451653..5c9f3275aaa 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -174,7 +174,7 @@ static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct dvb_usb_rc_key ir_codes_vp702x_table[] = {
+static struct ir_scancode ir_codes_vp702x_table[] = {
 	{ 0x0001, KEY_1 },
 	{ 0x0002, KEY_2 },
 };
@@ -200,7 +200,7 @@ static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	for (i = 0; i < ARRAY_SIZE(ir_codes_vp702x_table); i++)
 		if (rc5_custom(&ir_codes_vp702x_table[i]) == key[1]) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp702x_table[i].event;
+			*event = ir_codes_vp702x_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -283,10 +283,12 @@ static struct dvb_usb_device_properties vp702x_properties = {
 	},
 	.read_mac_address = vp702x_read_mac_addr,
 
-	.rc_key_map       = ir_codes_vp702x_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp702x_table),
-	.rc_interval      = 400,
-	.rc_query         = vp702x_rc_query,
+	.rc.legacy = {
+		.rc_key_map       = ir_codes_vp702x_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp702x_table),
+		.rc_interval      = 400,
+		.rc_query         = vp702x_rc_query,
+	},
 
 	.num_device_descs = 1,
 	.devices = {
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 036893fa448..f13791ca599 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -99,7 +99,7 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
 
 /* The keymapping struct. Somehow this should be loaded to the driver, but
  * currently it is hardcoded. */
-static struct dvb_usb_rc_key ir_codes_vp7045_table[] = {
+static struct ir_scancode ir_codes_vp7045_table[] = {
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
 	{ 0x0003, KEY_1 },
@@ -168,7 +168,7 @@ static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	for (i = 0; i < ARRAY_SIZE(ir_codes_vp7045_table); i++)
 		if (rc5_data(&ir_codes_vp7045_table[i]) == key) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp7045_table[i].event;
+			*event = ir_codes_vp7045_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -259,10 +259,12 @@ static struct dvb_usb_device_properties vp7045_properties = {
 	.power_ctrl       = vp7045_power_ctrl,
 	.read_mac_address = vp7045_read_mac_addr,
 
-	.rc_interval      = 400,
-	.rc_key_map       = ir_codes_vp7045_table,
-	.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp7045_table),
-	.rc_query         = vp7045_rc_query,
+	.rc.legacy = {
+		.rc_interval      = 400,
+		.rc_key_map       = ir_codes_vp7045_table,
+		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp7045_table),
+		.rc_query         = vp7045_rc_query,
+	},
 
 	.num_device_descs = 2,
 	.devices = {
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 26333b4f4d3..b34ca7afb0e 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -58,7 +58,7 @@ static void rawiso_activity_cb(struct hpsb_iso *iso)
 	num = hpsb_iso_n_ready(iso);
 
 	if (!fdtv) {
-		dev_err(fdtv->device, "received at unknown iso channel\n");
+		pr_err("received at unknown iso channel\n");
 		goto out;
 	}
 
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index cd7f9b7cbff..51d578a758a 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -584,6 +584,7 @@ config DVB_LGS8GL5
 config DVB_LGS8GXX
 	tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator"
 	depends on DVB_CORE && I2C
+	select FW_LOADER
 	default m if DVB_FE_CUSTOMISE
 	help
 	  A DMB-TH tuner module. Say Y when you want to support this frontend.
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 12e018b4107..dac917f7bb7 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -1,5 +1,5 @@
 /*
- * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
  *
@@ -761,6 +761,10 @@ static int af9013_set_frontend(struct dvb_frontend *fe,
 
 	state->frequency = params->frequency;
 
+	/* program tuner */
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, params);
+
 	/* program CFOE coefficients */
 	ret = af9013_set_coeff(state, params->u.ofdm.bandwidth);
 	if (ret)
@@ -791,10 +795,6 @@ static int af9013_set_frontend(struct dvb_frontend *fe,
 	if (ret)
 		goto error;
 
-	/* program tuner */
-	if (fe->ops.tuner_ops.set_params)
-		fe->ops.tuner_ops.set_params(fe, params);
-
 	/* program TPS and bandwidth, check if auto mode needed */
 	ret = af9013_set_ofdm_params(state, &params->u.ofdm, &auto_mode);
 	if (ret)
@@ -1184,45 +1184,49 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
 	u8 tmp;
 	*status = 0;
 
-	/* TPS lock */
-	ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp);
-	if (ret)
-		goto error;
-	if (tmp)
-		*status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL;
-
 	/* MPEG2 lock */
 	ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp);
 	if (ret)
 		goto error;
 	if (tmp)
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
+			FE_HAS_SYNC | FE_HAS_LOCK;
 
-	if (!(*status & FE_HAS_SIGNAL)) {
-		/* AGC lock */
-		ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp);
+	if (!*status) {
+		/* TPS lock */
+		ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp);
 		if (ret)
 			goto error;
 		if (tmp)
-			*status |= FE_HAS_SIGNAL;
+			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI;
 	}
 
-	if (!(*status & FE_HAS_CARRIER)) {
+	if (!*status) {
 		/* CFO lock */
 		ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp);
 		if (ret)
 			goto error;
 		if (tmp)
-			*status |= FE_HAS_CARRIER;
+			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
 	}
 
-	if (!(*status & FE_HAS_CARRIER)) {
+	if (!*status) {
 		/* SFOE lock */
 		ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp);
 		if (ret)
 			goto error;
 		if (tmp)
-			*status |= FE_HAS_CARRIER;
+			*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
+	}
+
+	if (!*status) {
+		/* AGC lock */
+		ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp);
+		if (ret)
+			goto error;
+		if (tmp)
+			*status |= FE_HAS_SIGNAL;
 	}
 
 	ret = af9013_update_statistics(fe);
@@ -1574,7 +1578,7 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config,
 {
 	int ret;
 	struct af9013_state *state = NULL;
-	u8 buf[3], i;
+	u8 buf[4], i;
 
 	/* allocate memory for the internal state */
 	state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL);
@@ -1607,12 +1611,12 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config,
 	}
 
 	/* firmware version */
-	for (i = 0; i < 3; i++) {
+	for (i = 0; i < 4; i++) {
 		ret = af9013_read_reg(state, 0x5103 + i, &buf[i]);
 		if (ret)
 			goto error;
 	}
-	info("firmware version:%d.%d.%d", buf[0], buf[1], buf[2]);
+	info("firmware version:%d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]);
 
 	/* settings for mp2if */
 	if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) {
diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h
index e90fa92b1c1..72c71bb5d11 100644
--- a/drivers/media/dvb/frontends/af9013.h
+++ b/drivers/media/dvb/frontends/af9013.h
@@ -1,5 +1,5 @@
 /*
- * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
  *
diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb/frontends/af9013_priv.h
index 163e251d0b7..0fd42b7e248 100644
--- a/drivers/media/dvb/frontends/af9013_priv.h
+++ b/drivers/media/dvb/frontends/af9013_priv.h
@@ -1,5 +1,5 @@
 /*
- * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
  *
@@ -132,6 +132,8 @@ static struct regdesc ofsm_init[] = {
 	{ 0xd740, 2, 1, 0x00 },
 	{ 0xd740, 3, 1, 0x01 },
 	{ 0xd3c1, 4, 1, 0x01 },
+	{ 0x9124, 0, 8, 0x58 },
+	{ 0x9125, 0, 2, 0x02 },
 	{ 0xd3a2, 0, 8, 0x00 },
 	{ 0xd3a3, 0, 8, 0x04 },
 	{ 0xd305, 0, 8, 0x32 },
@@ -143,7 +145,7 @@ static struct regdesc ofsm_init[] = {
 	{ 0x911b, 0, 1, 0x01 },
 	{ 0x9bce, 0, 4, 0x02 },
 	{ 0x9116, 0, 1, 0x01 },
-	{ 0x9bd1, 0, 1, 0x01 },
+	{ 0x9122, 0, 8, 0xd0 },
 	{ 0xd2e0, 0, 8, 0xd0 },
 	{ 0xd2e9, 0, 4, 0x0d },
 	{ 0xd38c, 0, 8, 0xfc },
@@ -165,7 +167,6 @@ static struct regdesc ofsm_init[] = {
 	{ 0xd081, 4, 4, 0x09 },
 	{ 0xd098, 4, 4, 0x0f },
 	{ 0xd098, 0, 4, 0x03 },
-	{ 0xdbc0, 3, 1, 0x01 },
 	{ 0xdbc0, 4, 1, 0x01 },
 	{ 0xdbc7, 0, 8, 0x08 },
 	{ 0xdbc8, 4, 4, 0x00 },
@@ -179,6 +180,7 @@ static struct regdesc ofsm_init[] = {
 	{ 0xd0f0, 0, 7, 0x1a },
 	{ 0xd0f1, 4, 1, 0x01 },
 	{ 0xd0f2, 0, 8, 0x0c },
+	{ 0xd101, 5, 3, 0x06 },
 	{ 0xd103, 0, 4, 0x08 },
 	{ 0xd0f8, 0, 7, 0x20 },
 	{ 0xd111, 5, 1, 0x00 },
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 68dba3a4b4d..29cdbfe3685 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -567,30 +567,6 @@ static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 
 /* ----------------------------------------------------------------------- */
 
-static int au8522_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int au8522_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		/* Not yet implemented */
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int au8522_g_register(struct v4l2_subdev *sd,
 			     struct v4l2_dbg_register *reg)
@@ -772,8 +748,6 @@ static const struct v4l2_subdev_audio_ops au8522_audio_ops = {
 
 static const struct v4l2_subdev_video_ops au8522_video_ops = {
 	.s_routing = au8522_s_video_routing,
-	.g_fmt = au8522_g_fmt,
-	.s_fmt = au8522_s_fmt,
 	.s_stream = au8522_s_stream,
 };
 
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index ad4c8cfd809..e80c5979636 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -38,11 +38,10 @@
 #define DRIVER_DESC "DiBcom 3000M-B DVB-T demodulator"
 #define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
 
-#ifdef CONFIG_DVB_DIBCOM_DEBUG
 static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-able)).");
-#endif
+
 #define deb_info(args...) dprintk(0x01,args)
 #define deb_i2c(args...)  dprintk(0x02,args)
 #define deb_srch(args...) dprintk(0x04,args)
@@ -51,12 +50,6 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-a
 #define deb_setf(args...) dprintk(0x04,args)
 #define deb_getf(args...) dprintk(0x08,args)
 
-#ifdef CONFIG_DVB_DIBCOM_DEBUG
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c,4=srch (|-able)).");
-#endif
-
 static int dib3000_read_reg(struct dib3000_state *state, u16 reg)
 {
 	u8 wb[] = { ((reg >> 8) | 0x80) & 0xff, reg & 0xff };
diff --git a/drivers/media/dvb/frontends/dib3000mb_priv.h b/drivers/media/dvb/frontends/dib3000mb_priv.h
index 1a12747fdc9..16c526591f3 100644
--- a/drivers/media/dvb/frontends/dib3000mb_priv.h
+++ b/drivers/media/dvb/frontends/dib3000mb_priv.h
@@ -37,12 +37,8 @@
 
 /* debug */
 
-#ifdef CONFIG_DVB_DIBCOM_DEBUG
 #define dprintk(level,args...) \
     do { if ((debug & level)) { printk(args); } } while (0)
-#else
-#define dprintk(args...) do { } while (0)
-#endif
 
 /* mask for enabling a specific pid for the pid_filter */
 #define DIB3000_ACTIVATE_PID_FILTERING	(0x2000)
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index afad252abf4..088e7fadbe3 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -822,7 +822,7 @@ int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 defa
 
 	dmcst = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
 	if (dmcst == NULL)
-		return -ENODEV;
+		return -ENOMEM;
 
 	dmcst->i2c_adap = i2c;
 
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
index 78001e8bcdb..fc61d9230db 100644
--- a/drivers/media/dvb/frontends/ds3000.c
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -969,15 +969,12 @@ struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
 	dprintk("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ds3000_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL);
 	if (state == NULL) {
 		printk(KERN_ERR "Unable to kmalloc\n");
 		goto error2;
 	}
 
-	/* setup the state */
-	memset(state, 0, sizeof(struct ds3000_state));
-
 	state->config = config;
 	state->i2c = i2c;
 	state->prevUCBS2 = 0;
diff --git a/drivers/media/dvb/frontends/lgdt3305.c b/drivers/media/dvb/frontends/lgdt3305.c
index d69c775f864..3272881cb11 100644
--- a/drivers/media/dvb/frontends/lgdt3305.c
+++ b/drivers/media/dvb/frontends/lgdt3305.c
@@ -1,7 +1,9 @@
 /*
- *    Support for LGDT3305 - VSB/QAM
+ *    Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM
  *
- *    Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
+ *    Copyright (C) 2008, 2009, 2010 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ *    LGDT3304 support by Jarod Wilson <jarod@redhat.com>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -65,6 +67,8 @@ struct lgdt3305_state {
 
 /* ------------------------------------------------------------------------ */
 
+/* FIXME: verify & document the LGDT3304 registers */
+
 #define LGDT3305_GEN_CTRL_1                   0x0000
 #define LGDT3305_GEN_CTRL_2                   0x0001
 #define LGDT3305_GEN_CTRL_3                   0x0002
@@ -358,7 +362,12 @@ static int lgdt3305_rfagc_loop(struct lgdt3305_state *state,
 	case QAM_256:
 		agcdelay = 0x046b;
 		rfbw     = 0x8889;
-		ifbw     = 0x8888;
+		/* FIXME: investigate optimal ifbw & rfbw values for the
+		 *        DT3304 and re-write this switch..case block */
+		if (state->cfg->demod_chip == LGDT3304)
+			ifbw = 0x6666;
+		else /* (state->cfg->demod_chip == LGDT3305) */
+			ifbw = 0x8888;
 		break;
 	default:
 		return -EINVAL;
@@ -410,8 +419,18 @@ static int lgdt3305_agc_setup(struct lgdt3305_state *state,
 	lg_dbg("lockdten = %d, acqen = %d\n", lockdten, acqen);
 
 	/* control agc function */
-	lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1);
-	lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen);
+	switch (state->cfg->demod_chip) {
+	case LGDT3304:
+		lgdt3305_write_reg(state, 0x0314, 0xe1 | lockdten << 1);
+		lgdt3305_set_reg_bit(state, 0x030e, 2, acqen);
+		break;
+	case LGDT3305:
+		lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1);
+		lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen);
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	return lgdt3305_rfagc_loop(state, param);
 }
@@ -577,61 +596,79 @@ static int lgdt3305_init(struct dvb_frontend *fe)
 	struct lgdt3305_state *state = fe->demodulator_priv;
 	int ret;
 
+	static struct lgdt3305_reg lgdt3304_init_data[] = {
+		{ .reg = LGDT3305_GEN_CTRL_1,           .val = 0x03, },
+		{ .reg = 0x000d,                        .val = 0x02, },
+		{ .reg = 0x000e,                        .val = 0x02, },
+		{ .reg = LGDT3305_DGTL_AGC_REF_1,       .val = 0x32, },
+		{ .reg = LGDT3305_DGTL_AGC_REF_2,       .val = 0xc4, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_1,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_2,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_3,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_4,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTRL_7,            .val = 0xf9, },
+		{ .reg = 0x0112,                        .val = 0x17, },
+		{ .reg = 0x0113,                        .val = 0x15, },
+		{ .reg = 0x0114,                        .val = 0x18, },
+		{ .reg = 0x0115,                        .val = 0xff, },
+		{ .reg = 0x0116,                        .val = 0x3c, },
+		{ .reg = 0x0214,                        .val = 0x67, },
+		{ .reg = 0x0424,                        .val = 0x8d, },
+		{ .reg = 0x0427,                        .val = 0x12, },
+		{ .reg = 0x0428,                        .val = 0x4f, },
+		{ .reg = LGDT3305_IFBW_1,               .val = 0x80, },
+		{ .reg = LGDT3305_IFBW_2,               .val = 0x00, },
+		{ .reg = 0x030a,                        .val = 0x08, },
+		{ .reg = 0x030b,                        .val = 0x9b, },
+		{ .reg = 0x030d,                        .val = 0x00, },
+		{ .reg = 0x030e,                        .val = 0x1c, },
+		{ .reg = 0x0314,                        .val = 0xe1, },
+		{ .reg = 0x000d,                        .val = 0x82, },
+		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x5b, },
+		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x5b, },
+	};
+
 	static struct lgdt3305_reg lgdt3305_init_data[] = {
-		{ .reg = LGDT3305_GEN_CTRL_1,
-		  .val = 0x03, },
-		{ .reg = LGDT3305_GEN_CTRL_2,
-		  .val = 0xb0, },
-		{ .reg = LGDT3305_GEN_CTRL_3,
-		  .val = 0x01, },
-		{ .reg = LGDT3305_GEN_CONTROL,
-		  .val = 0x6f, },
-		{ .reg = LGDT3305_GEN_CTRL_4,
-		  .val = 0x03, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_1,
-		  .val = 0x32, },
-		{ .reg = LGDT3305_DGTL_AGC_REF_2,
-		  .val = 0xc4, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_1,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_2,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_3,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTR_FREQ_4,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_CR_CTRL_7,
-		  .val = 0x79, },
-		{ .reg = LGDT3305_AGC_POWER_REF_1,
-		  .val = 0x32, },
-		{ .reg = LGDT3305_AGC_POWER_REF_2,
-		  .val = 0xc4, },
-		{ .reg = LGDT3305_AGC_DELAY_PT_1,
-		  .val = 0x0d, },
-		{ .reg = LGDT3305_AGC_DELAY_PT_2,
-		  .val = 0x30, },
-		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_1,
-		  .val = 0x80, },
-		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_2,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_IFBW_1,
-		  .val = 0x80, },
-		{ .reg = LGDT3305_IFBW_2,
-		  .val = 0x00, },
-		{ .reg = LGDT3305_AGC_CTRL_1,
-		  .val = 0x30, },
-		{ .reg = LGDT3305_AGC_CTRL_4,
-		  .val = 0x61, },
-		{ .reg = LGDT3305_FEC_BLOCK_CTRL,
-		  .val = 0xff, },
-		{ .reg = LGDT3305_TP_CTRL_1,
-		  .val = 0x1b, },
+		{ .reg = LGDT3305_GEN_CTRL_1,           .val = 0x03, },
+		{ .reg = LGDT3305_GEN_CTRL_2,           .val = 0xb0, },
+		{ .reg = LGDT3305_GEN_CTRL_3,           .val = 0x01, },
+		{ .reg = LGDT3305_GEN_CONTROL,          .val = 0x6f, },
+		{ .reg = LGDT3305_GEN_CTRL_4,           .val = 0x03, },
+		{ .reg = LGDT3305_DGTL_AGC_REF_1,       .val = 0x32, },
+		{ .reg = LGDT3305_DGTL_AGC_REF_2,       .val = 0xc4, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_1,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_2,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_3,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTR_FREQ_4,        .val = 0x00, },
+		{ .reg = LGDT3305_CR_CTRL_7,            .val = 0x79, },
+		{ .reg = LGDT3305_AGC_POWER_REF_1,      .val = 0x32, },
+		{ .reg = LGDT3305_AGC_POWER_REF_2,      .val = 0xc4, },
+		{ .reg = LGDT3305_AGC_DELAY_PT_1,       .val = 0x0d, },
+		{ .reg = LGDT3305_AGC_DELAY_PT_2,       .val = 0x30, },
+		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_1, .val = 0x80, },
+		{ .reg = LGDT3305_RFAGC_LOOP_FLTR_BW_2, .val = 0x00, },
+		{ .reg = LGDT3305_IFBW_1,               .val = 0x80, },
+		{ .reg = LGDT3305_IFBW_2,               .val = 0x00, },
+		{ .reg = LGDT3305_AGC_CTRL_1,           .val = 0x30, },
+		{ .reg = LGDT3305_AGC_CTRL_4,           .val = 0x61, },
+		{ .reg = LGDT3305_FEC_BLOCK_CTRL,       .val = 0xff, },
+		{ .reg = LGDT3305_TP_CTRL_1,            .val = 0x1b, },
 	};
 
 	lg_dbg("\n");
 
-	ret = lgdt3305_write_regs(state, lgdt3305_init_data,
-				  ARRAY_SIZE(lgdt3305_init_data));
+	switch (state->cfg->demod_chip) {
+	case LGDT3304:
+		ret = lgdt3305_write_regs(state, lgdt3304_init_data,
+					  ARRAY_SIZE(lgdt3304_init_data));
+		break;
+	case LGDT3305:
+		ret = lgdt3305_write_regs(state, lgdt3305_init_data,
+					  ARRAY_SIZE(lgdt3305_init_data));
+		break;
+	default:
+		ret = -EINVAL;
+	}
 	if (lg_fail(ret))
 		goto fail;
 
@@ -640,6 +677,76 @@ fail:
 	return ret;
 }
 
+static int lgdt3304_set_parameters(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *param)
+{
+	struct lgdt3305_state *state = fe->demodulator_priv;
+	int ret;
+
+	lg_dbg("(%d, %d)\n", param->frequency, param->u.vsb.modulation);
+
+	if (fe->ops.tuner_ops.set_params) {
+		ret = fe->ops.tuner_ops.set_params(fe, param);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+		if (lg_fail(ret))
+			goto fail;
+		state->current_frequency = param->frequency;
+	}
+
+	ret = lgdt3305_set_modulation(state, param);
+	if (lg_fail(ret))
+		goto fail;
+
+	ret = lgdt3305_passband_digital_agc(state, param);
+	if (lg_fail(ret))
+		goto fail;
+
+	ret = lgdt3305_agc_setup(state, param);
+	if (lg_fail(ret))
+		goto fail;
+
+	/* reg 0x030d is 3304-only... seen in vsb and qam usbsnoops... */
+	switch (param->u.vsb.modulation) {
+	case VSB_8:
+		lgdt3305_write_reg(state, 0x030d, 0x00);
+		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, 0x4f);
+		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, 0x0c);
+		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, 0xac);
+		lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, 0xba);
+		break;
+	case QAM_64:
+	case QAM_256:
+		lgdt3305_write_reg(state, 0x030d, 0x14);
+		ret = lgdt3305_set_if(state, param);
+		if (lg_fail(ret))
+			goto fail;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+
+	ret = lgdt3305_spectral_inversion(state, param,
+					  state->cfg->spectral_inversion
+					  ? 1 : 0);
+	if (lg_fail(ret))
+		goto fail;
+
+	state->current_modulation = param->u.vsb.modulation;
+
+	ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode);
+	if (lg_fail(ret))
+		goto fail;
+
+	/* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */
+	ret = lgdt3305_mpeg_mode_polarity(state,
+					  state->cfg->tpclk_edge,
+					  state->cfg->tpvalid_polarity);
+fail:
+	return ret;
+}
+
 static int lgdt3305_set_parameters(struct dvb_frontend *fe,
 				   struct dvb_frontend_parameters *param)
 {
@@ -848,6 +955,10 @@ static int lgdt3305_read_status(struct dvb_frontend *fe, fe_status_t *status)
 	switch (state->current_modulation) {
 	case QAM_256:
 	case QAM_64:
+		/* signal bit is unreliable on the DT3304 in QAM mode */
+		if (((LGDT3304 == state->cfg->demod_chip)) && (cr_lock))
+			*status |= FE_HAS_SIGNAL;
+
 		ret = lgdt3305_read_fec_lock_status(state, &fec_lock);
 		if (lg_fail(ret))
 			goto fail;
@@ -993,6 +1104,7 @@ static void lgdt3305_release(struct dvb_frontend *fe)
 	kfree(state);
 }
 
+static struct dvb_frontend_ops lgdt3304_ops;
 static struct dvb_frontend_ops lgdt3305_ops;
 
 struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
@@ -1013,11 +1125,21 @@ struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
 	state->cfg = config;
 	state->i2c_adap = i2c_adap;
 
-	memcpy(&state->frontend.ops, &lgdt3305_ops,
-	       sizeof(struct dvb_frontend_ops));
+	switch (config->demod_chip) {
+	case LGDT3304:
+		memcpy(&state->frontend.ops, &lgdt3304_ops,
+		       sizeof(struct dvb_frontend_ops));
+		break;
+	case LGDT3305:
+		memcpy(&state->frontend.ops, &lgdt3305_ops,
+		       sizeof(struct dvb_frontend_ops));
+		break;
+	default:
+		goto fail;
+	}
 	state->frontend.demodulator_priv = state;
 
-	/* verify that we're talking to a lg dt3305 */
+	/* verify that we're talking to a lg dt3304/5 */
 	ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_2, &val);
 	if ((lg_fail(ret)) | (val == 0))
 		goto fail;
@@ -1036,12 +1158,35 @@ struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config,
 
 	return &state->frontend;
 fail:
-	lg_warn("unable to detect LGDT3305 hardware\n");
+	lg_warn("unable to detect %s hardware\n",
+		config->demod_chip ? "LGDT3304" : "LGDT3305");
 	kfree(state);
 	return NULL;
 }
 EXPORT_SYMBOL(lgdt3305_attach);
 
+static struct dvb_frontend_ops lgdt3304_ops = {
+	.info = {
+		.name = "LG Electronics LGDT3304 VSB/QAM Frontend",
+		.type               = FE_ATSC,
+		.frequency_min      = 54000000,
+		.frequency_max      = 858000000,
+		.frequency_stepsize = 62500,
+		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
+	},
+	.i2c_gate_ctrl        = lgdt3305_i2c_gate_ctrl,
+	.init                 = lgdt3305_init,
+	.set_frontend         = lgdt3304_set_parameters,
+	.get_frontend         = lgdt3305_get_frontend,
+	.get_tune_settings    = lgdt3305_get_tune_settings,
+	.read_status          = lgdt3305_read_status,
+	.read_ber             = lgdt3305_read_ber,
+	.read_signal_strength = lgdt3305_read_signal_strength,
+	.read_snr             = lgdt3305_read_snr,
+	.read_ucblocks        = lgdt3305_read_ucblocks,
+	.release              = lgdt3305_release,
+};
+
 static struct dvb_frontend_ops lgdt3305_ops = {
 	.info = {
 		.name = "LG Electronics LGDT3305 VSB/QAM Frontend",
@@ -1065,10 +1210,10 @@ static struct dvb_frontend_ops lgdt3305_ops = {
 	.release              = lgdt3305_release,
 };
 
-MODULE_DESCRIPTION("LG Electronics LGDT3305 ATSC/QAM-B Demodulator Driver");
+MODULE_DESCRIPTION("LG Electronics LGDT3304/5 ATSC/QAM-B Demodulator Driver");
 MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
 MODULE_LICENSE("GPL");
-MODULE_VERSION("0.1");
+MODULE_VERSION("0.2");
 
 /*
  * Local variables:
diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h
index 9cb11c9cae5..02172eca4d4 100644
--- a/drivers/media/dvb/frontends/lgdt3305.h
+++ b/drivers/media/dvb/frontends/lgdt3305.h
@@ -1,7 +1,7 @@
 /*
- *    Support for LGDT3305 - VSB/QAM
+ *    Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM
  *
- *    Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
+ *    Copyright (C) 2008, 2009, 2010 Michael Krufky <mkrufky@linuxtv.org>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -41,6 +41,11 @@ enum lgdt3305_tp_valid_polarity {
 	LGDT3305_TP_VALID_HIGH = 1,
 };
 
+enum lgdt_demod_chip_type {
+	LGDT3305 = 0,
+	LGDT3304 = 1,
+};
+
 struct lgdt3305_config {
 	u8 i2c_addr;
 
@@ -65,6 +70,7 @@ struct lgdt3305_config {
 	enum lgdt3305_mpeg_mode mpeg_mode;
 	enum lgdt3305_tp_clock_edge tpclk_edge;
 	enum lgdt3305_tp_valid_polarity tpvalid_polarity;
+	enum lgdt_demod_chip_type demod_chip;
 };
 
 #if defined(CONFIG_DVB_LGDT3305) || (defined(CONFIG_DVB_LGDT3305_MODULE) && \
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
index dee53960e7e..5ea28ae2ba8 100644
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/drivers/media/dvb/frontends/lgs8gxx.c
@@ -24,6 +24,7 @@
  */
 
 #include <asm/div64.h>
+#include <linux/firmware.h>
 
 #include "dvb_frontend.h"
 
@@ -46,42 +47,6 @@ module_param(fake_signal_str, int, 0644);
 MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913."
 "Signal strength calculation is slow.(default:on).");
 
-static const u8 lgs8g75_initdat[] = {
-	0x01, 0x30, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xE4, 0xF5, 0xA8, 0xF5, 0xB8, 0xF5, 0x88, 0xF5,
-	0x89, 0xF5, 0x87, 0x75, 0xD0, 0x00, 0x11, 0x50,
-	0x11, 0x50, 0xF4, 0xF5, 0x80, 0xF5, 0x90, 0xF5,
-	0xA0, 0xF5, 0xB0, 0x75, 0x81, 0x30, 0x80, 0x01,
-	0x32, 0x90, 0x80, 0x12, 0x74, 0xFF, 0xF0, 0x90,
-	0x80, 0x13, 0x74, 0x1F, 0xF0, 0x90, 0x80, 0x23,
-	0x74, 0x01, 0xF0, 0x90, 0x80, 0x22, 0xF0, 0x90,
-	0x00, 0x48, 0x74, 0x00, 0xF0, 0x90, 0x80, 0x4D,
-	0x74, 0x05, 0xF0, 0x90, 0x80, 0x09, 0xE0, 0x60,
-	0x21, 0x12, 0x00, 0xDD, 0x14, 0x60, 0x1B, 0x12,
-	0x00, 0xDD, 0x14, 0x60, 0x15, 0x12, 0x00, 0xDD,
-	0x14, 0x60, 0x0F, 0x12, 0x00, 0xDD, 0x14, 0x60,
-	0x09, 0x12, 0x00, 0xDD, 0x14, 0x60, 0x03, 0x12,
-	0x00, 0xDD, 0x90, 0x80, 0x42, 0xE0, 0x60, 0x0B,
-	0x14, 0x60, 0x0C, 0x14, 0x60, 0x0D, 0x14, 0x60,
-	0x0E, 0x01, 0xB3, 0x74, 0x04, 0x01, 0xB9, 0x74,
-	0x05, 0x01, 0xB9, 0x74, 0x07, 0x01, 0xB9, 0x74,
-	0x0A, 0xC0, 0xE0, 0x74, 0xC8, 0x12, 0x00, 0xE2,
-	0xD0, 0xE0, 0x14, 0x70, 0xF4, 0x90, 0x80, 0x09,
-	0xE0, 0x70, 0xAE, 0x12, 0x00, 0xF6, 0x12, 0x00,
-	0xFE, 0x90, 0x00, 0x48, 0xE0, 0x04, 0xF0, 0x90,
-	0x80, 0x4E, 0xF0, 0x01, 0x73, 0x90, 0x80, 0x08,
-	0xF0, 0x22, 0xF8, 0x7A, 0x0C, 0x79, 0xFD, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD9,
-	0xF6, 0xDA, 0xF2, 0xD8, 0xEE, 0x22, 0x90, 0x80,
-	0x65, 0xE0, 0x54, 0xFD, 0xF0, 0x22, 0x90, 0x80,
-	0x65, 0xE0, 0x44, 0xC2, 0xF0, 0x22
-};
-
 /* LGS8GXX internal helper functions */
 
 static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
@@ -627,9 +592,14 @@ static int lgs8913_init(struct lgs8gxx_state *priv)
 
 static int lgs8g75_init_data(struct lgs8gxx_state *priv)
 {
-	const u8 *p = lgs8g75_initdat;
+	const struct firmware *fw;
+	int rc;
 	int i;
 
+	rc = request_firmware(&fw, "lgs8g75.fw", &priv->i2c->dev);
+	if (rc)
+		return rc;
+
 	lgs8gxx_write_reg(priv, 0xC6, 0x40);
 
 	lgs8gxx_write_reg(priv, 0x3D, 0x04);
@@ -640,16 +610,16 @@ static int lgs8g75_init_data(struct lgs8gxx_state *priv)
 	lgs8gxx_write_reg(priv, 0x3B, 0x00);
 	lgs8gxx_write_reg(priv, 0x38, 0x00);
 
-	for (i = 0; i < sizeof(lgs8g75_initdat); i++) {
+	for (i = 0; i < fw->size; i++) {
 		lgs8gxx_write_reg(priv, 0x38, 0x00);
 		lgs8gxx_write_reg(priv, 0x3A, (u8)(i&0xff));
 		lgs8gxx_write_reg(priv, 0x3B, (u8)(i>>8));
-		lgs8gxx_write_reg(priv, 0x3C, *p);
-		p++;
+		lgs8gxx_write_reg(priv, 0x3C, fw->data[i]);
 	}
 
 	lgs8gxx_write_reg(priv, 0x38, 0x00);
 
+	release_firmware(fw);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
index 599d1aa519a..33b63235b86 100644
--- a/drivers/media/dvb/frontends/mb86a16.c
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -1833,7 +1833,6 @@ static struct dvb_frontend_ops mb86a16_ops = {
 
 	.get_frontend_algo		= mb86a16_frontend_algo,
 	.search				= mb86a16_search,
-	.read_status			= mb86a16_read_status,
 	.init				= mb86a16_init,
 	.sleep				= mb86a16_sleep,
 	.read_status			= mb86a16_read_status,
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
index 42591ce1aaa..f36cab12bdc 100644
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -303,7 +303,10 @@ static int stv6110x_set_mode(struct dvb_frontend *fe, enum tuner_mode mode)
 
 static int stv6110x_sleep(struct dvb_frontend *fe)
 {
-	return stv6110x_set_mode(fe, TUNER_SLEEP);
+	if (fe->tuner_priv)
+		return stv6110x_set_mode(fe, TUNER_SLEEP);
+
+	return 0;
 }
 
 static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status)
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 4e2a7c8b2f6..93f6a75c238 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -25,6 +25,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/math64.h>
 #include <asm/div64.h>
 #include "dvb_frontend.h"
 #include "dvb_math.h"
@@ -49,8 +50,8 @@
 #define TDA10048_CONF_C4_1         0x1E
 #define TDA10048_CONF_C4_2         0x1F
 #define TDA10048_CODE_IN_RAM       0x20
-#define TDA10048_CHANNEL_INFO_1_R  0x22
-#define TDA10048_CHANNEL_INFO_2_R  0x23
+#define TDA10048_CHANNEL_INFO1_R   0x22
+#define TDA10048_CHANNEL_INFO2_R   0x23
 #define TDA10048_CHANNEL_INFO1     0x24
 #define TDA10048_CHANNEL_INFO2     0x25
 #define TDA10048_TIME_ERROR_R      0x26
@@ -63,8 +64,8 @@
 #define TDA10048_IT_STAT           0x32
 #define TDA10048_DSP_AD_LSB        0x3C
 #define TDA10048_DSP_AD_MSB        0x3D
-#define TDA10048_DSP_REF_LSB       0x3E
-#define TDA10048_DSP_REF_MSB       0x3F
+#define TDA10048_DSP_REG_LSB       0x3E
+#define TDA10048_DSP_REG_MSB       0x3F
 #define TDA10048_CONF_TRISTATE1    0x44
 #define TDA10048_CONF_TRISTATE2    0x45
 #define TDA10048_CONF_POLARITY     0x46
@@ -112,7 +113,7 @@
 #define TDA10048_FREE_REG_1        0xB2
 #define TDA10048_FREE_REG_2        0xB3
 #define TDA10048_CONF_C3_1         0xC0
-#define TDA10048_CYBER_CTRL        0xC2
+#define TDA10048_CVBER_CTRL        0xC2
 #define TDA10048_CBER_NMAX_LSB     0xC4
 #define TDA10048_CBER_NMAX_MSB     0xC5
 #define TDA10048_CBER_LSB          0xC6
@@ -120,7 +121,7 @@
 #define TDA10048_VBER_LSB          0xC8
 #define TDA10048_VBER_MID          0xC9
 #define TDA10048_VBER_MSB          0xCA
-#define TDA10048_CYBER_LUT         0xCC
+#define TDA10048_CVBER_LUT         0xCC
 #define TDA10048_UNCOR_CTRL        0xCD
 #define TDA10048_UNCOR_CPT_LSB     0xCE
 #define TDA10048_UNCOR_CPT_MSB     0xCF
@@ -183,7 +184,7 @@ static struct init_tab {
 	{ TDA10048_AGC_IF_MAX, 0xff },
 	{ TDA10048_AGC_THRESHOLD_MSB, 0x00 },
 	{ TDA10048_AGC_THRESHOLD_LSB, 0x70 },
-	{ TDA10048_CYBER_CTRL, 0x38 },
+	{ TDA10048_CVBER_CTRL, 0x38 },
 	{ TDA10048_AGC_GAINS, 0x12 },
 	{ TDA10048_CONF_XO, 0x00 },
 	{ TDA10048_CONF_TS1, 0x07 },
@@ -688,7 +689,7 @@ static int tda10048_get_tps(struct tda10048_state *state,
 		p->guard_interval =  GUARD_INTERVAL_1_4;
 		break;
 	}
-	switch (val & 0x02) {
+	switch (val & 0x03) {
 	case 0:
 		p->transmission_mode = TRANSMISSION_MODE_2K;
 		break;
@@ -765,6 +766,8 @@ static int tda10048_set_frontend(struct dvb_frontend *fe,
 
 	/* Enable demod TPS auto detection and begin acquisition */
 	tda10048_writereg(state, TDA10048_AUTO, 0x57);
+	/* trigger cber and vber acquisition */
+	tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x3B);
 
 	return 0;
 }
@@ -830,12 +833,27 @@ static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status)
 static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
 	struct tda10048_state *state = fe->demodulator_priv;
+	static u32 cber_current;
+	u32 cber_nmax;
+	u64 cber_tmp;
 
 	dprintk(1, "%s()\n", __func__);
 
-	/* TODO: A reset may be required here */
-	*ber = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 |
-		tda10048_readreg(state, TDA10048_CBER_LSB);
+	/* update cber on interrupt */
+	if (tda10048_readreg(state, TDA10048_SOFT_IT_C3) & 0x01) {
+		cber_tmp = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 |
+			tda10048_readreg(state, TDA10048_CBER_LSB);
+		cber_nmax = tda10048_readreg(state, TDA10048_CBER_NMAX_MSB) << 8 |
+			tda10048_readreg(state, TDA10048_CBER_NMAX_LSB);
+		cber_tmp *= 100000000;
+		cber_tmp *= 2;
+		cber_tmp = div_u64(cber_tmp, (cber_nmax * 32) + 1);
+		cber_current = (u32)cber_tmp;
+		/* retrigger cber acquisition */
+		tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x39);
+	}
+	/* actual cber is (*ber)/1e8 */
+	*ber = cber_current;
 
 	return 0;
 }
@@ -1015,6 +1033,9 @@ static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 
 	*ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 |
 		tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB);
+	/* clear the uncorrected TS packets counter when saturated */
+	if (*ucblocks == 0xFFFF)
+		tda10048_writereg(state, TDA10048_UNCOR_CTRL, 0x80);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
index f7b72a32adf..decdeda840d 100644
--- a/drivers/media/dvb/mantis/Kconfig
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -10,9 +10,15 @@ config MANTIS_CORE
 config DVB_MANTIS
 	tristate "MANTIS based cards"
 	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_MB86A16
-	select DVB_ZL10353
-	select DVB_STV0299
+	select DVB_MB86A16 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_STB0899 if !DVB_FE_CUSTOMISE
+	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	select DVB_TDA665x if !DVB_FE_CUSTOMISE
+	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_PLL
 	help
 	  Support for PCI cards based on the Mantis PCI bridge.
@@ -23,7 +29,7 @@ config DVB_MANTIS
 config DVB_HOPPER
 	tristate "HOPPER based cards"
 	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_ZL10353
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_PLL
 	help
 	  Support for PCI cards based on the Hopper  PCI bridge.
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index 3d4e4663220..a99489b8418 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -19,7 +19,7 @@
 */
 
 #include <linux/input.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
@@ -104,7 +104,6 @@ EXPORT_SYMBOL_GPL(ir_mantis);
 int mantis_input_init(struct mantis_pci *mantis)
 {
 	struct input_dev *rc;
-	struct ir_input_state rc_state;
 	char name[80], dev[80];
 	int err;
 
@@ -120,8 +119,6 @@ int mantis_input_init(struct mantis_pci *mantis)
 	rc->name = name;
 	rc->phys = dev;
 
-	ir_input_init(rc, &rc_state, IR_TYPE_OTHER);
-
 	rc->id.bustype	= BUS_PCI;
 	rc->id.vendor	= mantis->vendor_id;
 	rc->id.product	= mantis->device_id;
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
index 692c3e226e8..4692a41ad95 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -217,6 +217,19 @@ static struct ngene_info ngene_info_cineS2v5 = {
 	.fw_version	= 15,
 };
 
+static struct ngene_info ngene_info_duoFlexS2 = {
+	.type           = NGENE_SIDEWINDER,
+	.name           = "Digital Devices DuoFlex S2 miniPCIe",
+	.io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN},
+	.demod_attach   = {demod_attach_stv0900, demod_attach_stv0900},
+	.tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110},
+	.fe_config      = {&fe_cineS2, &fe_cineS2},
+	.tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1},
+	.lnb            = {0x0a, 0x08},
+	.tsf            = {3, 3},
+	.fw_version     = 15,
+};
+
 static struct ngene_info ngene_info_m780 = {
 	.type           = NGENE_APP,
 	.name           = "Aver M780 ATSC/QAM-B",
@@ -256,6 +269,8 @@ static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
 	NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
 	NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
 	NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
+	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2),
+	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2),
 	NGENE_ID(0x1461, 0x062e, ngene_info_m780),
 	{0}
 };
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index c8b4dfa0ab5..4caeb163a66 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -53,8 +53,6 @@ MODULE_PARM_DESC(debug, "Print debugging information.");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-#define COMMAND_TIMEOUT_WORKAROUND
-
 #define dprintk	if (debug) printk
 
 #define ngwriteb(dat, adr)         writeb((dat), (char *)(dev->iomem + (adr)))
@@ -147,24 +145,24 @@ static void demux_tasklet(unsigned long data)
 		} else {
 			if (chan->HWState == HWSTATE_RUN) {
 				u32 Flags = 0;
+				IBufferExchange *exch1 = chan->pBufferExchange;
+				IBufferExchange *exch2 = chan->pBufferExchange2;
 				if (Cur->ngeneBuffer.SR.Flags & 0x01)
 					Flags |= BEF_EVEN_FIELD;
 				if (Cur->ngeneBuffer.SR.Flags & 0x20)
 					Flags |= BEF_OVERFLOW;
-				if (chan->pBufferExchange)
-					chan->pBufferExchange(chan,
-							      Cur->Buffer1,
-							      chan->
-							      Capture1Length,
-							      Cur->ngeneBuffer.
-							      SR.Clock, Flags);
-				if (chan->pBufferExchange2)
-					chan->pBufferExchange2(chan,
-							       Cur->Buffer2,
-							       chan->
-							       Capture2Length,
-							       Cur->ngeneBuffer.
-							       SR.Clock, Flags);
+				spin_unlock_irq(&chan->state_lock);
+				if (exch1)
+					exch1(chan, Cur->Buffer1,
+						chan->Capture1Length,
+						Cur->ngeneBuffer.SR.Clock,
+						Flags);
+				if (exch2)
+					exch2(chan, Cur->Buffer2,
+						chan->Capture2Length,
+						Cur->ngeneBuffer.SR.Clock,
+						Flags);
+				spin_lock_irq(&chan->state_lock);
 			} else if (chan->HWState != HWSTATE_STOP)
 				chan->HWState = HWSTATE_RUN;
 		}
@@ -572,11 +570,7 @@ static int ngene_command_stream_control(struct ngene *dev, u8 stream,
 	u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
 	u16 BsSDO = 0x9B00;
 
-	/* down(&dev->stream_mutex); */
-	while (down_trylock(&dev->stream_mutex)) {
-		printk(KERN_INFO DEVICE_NAME ": SC locked\n");
-		msleep(1);
-	}
+	down(&dev->stream_mutex);
 	memset(&com, 0, sizeof(com));
 	com.cmd.hdr.Opcode = CMD_CONTROL;
 	com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
@@ -1252,14 +1246,17 @@ static int ngene_load_firm(struct ngene *dev)
 		version = 15;
 		size = 23466;
 		fw_name = "ngene_15.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	case 16:
 		size = 23498;
 		fw_name = "ngene_16.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	case 17:
 		size = 24446;
 		fw_name = "ngene_17.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	}
 
@@ -1299,11 +1296,16 @@ static void ngene_stop(struct ngene *dev)
 	ngwritel(0, NGENE_EVENT);
 	ngwritel(0, NGENE_EVENT_HI);
 	free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+	if (dev->msi_enabled)
+		pci_disable_msi(dev->pci_dev);
+#endif
 }
 
 static int ngene_start(struct ngene *dev)
 {
 	int stat;
+	unsigned long flags;
 	int i;
 
 	pci_set_master(dev->pci_dev);
@@ -1333,6 +1335,28 @@ static int ngene_start(struct ngene *dev)
 	if (stat < 0)
 		goto fail;
 
+#ifdef CONFIG_PCI_MSI
+	/* enable MSI if kernel and card support it */
+	if (pci_msi_enabled() && dev->card_info->msi_supported) {
+		ngwritel(0, NGENE_INT_ENABLE);
+		free_irq(dev->pci_dev->irq, dev);
+		stat = pci_enable_msi(dev->pci_dev);
+		if (stat) {
+			printk(KERN_INFO DEVICE_NAME
+				": MSI not available\n");
+			flags = IRQF_SHARED;
+		} else {
+			flags = 0;
+			dev->msi_enabled = true;
+		}
+		stat = request_irq(dev->pci_dev->irq, irq_handler,
+					flags, "nGene", dev);
+		if (stat < 0)
+			goto fail2;
+		ngwritel(1, NGENE_INT_ENABLE);
+	}
+#endif
+
 	stat = ngene_i2c_init(dev, 0);
 	if (stat < 0)
 		goto fail;
@@ -1358,10 +1382,18 @@ static int ngene_start(struct ngene *dev)
 			bconf = BUFFER_CONFIG_3333;
 		stat = ngene_command_config_buf(dev, bconf);
 	}
-	return stat;
+	if (!stat)
+		return stat;
+
+	/* otherwise error: fall through */
 fail:
 	ngwritel(0, NGENE_INT_ENABLE);
 	free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+fail2:
+	if (dev->msi_enabled)
+		pci_disable_msi(dev->pci_dev);
+#endif
 	return stat;
 }
 
@@ -1379,10 +1411,8 @@ static void release_channel(struct ngene_channel *chan)
 	struct ngene_info *ni = dev->card_info;
 	int io = ni->io_type[chan->number];
 
-#ifdef COMMAND_TIMEOUT_WORKAROUND
-	if (chan->running)
+	if (chan->dev->cmd_timeout_workaround && chan->running)
 		set_transfer(chan, 0);
-#endif
 
 	tasklet_kill(&chan->demux_tasklet);
 
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 96013eb353c..48f980b21d6 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -37,15 +37,12 @@
 #include <linux/pci.h>
 #include <linux/smp_lock.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
 
 #include "ngene.h"
 
-#define COMMAND_TIMEOUT_WORKAROUND
-
 
 /****************************************************************************/
 /* COMMAND API interface ****************************************************/
@@ -69,9 +66,7 @@ void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 	struct ngene_channel *chan = priv;
 
 
-#ifdef COMMAND_TIMEOUT_WORKAROUND
 	if (chan->users > 0)
-#endif
 		dvb_dmx_swfilter(&chan->demux, buf, len);
 	return NULL;
 }
@@ -106,11 +101,8 @@ int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 	struct ngene_channel *chan = dvbdmx->priv;
 
 	if (chan->users == 0) {
-#ifdef COMMAND_TIMEOUT_WORKAROUND
-		if (!chan->running)
-#endif
+		if (!chan->dev->cmd_timeout_workaround || !chan->running)
 			set_transfer(chan, 1);
-		/* msleep(10); */
 	}
 
 	return ++chan->users;
@@ -124,9 +116,8 @@ int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 	if (--chan->users)
 		return chan->users;
 
-#ifndef COMMAND_TIMEOUT_WORKAROUND
-	set_transfer(chan, 0);
-#endif
+	if (!chan->dev->cmd_timeout_workaround)
+		set_transfer(chan, 0);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
index 2ef54ca6bad..477fe0aade8 100644
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ b/drivers/media/dvb/ngene/ngene-i2c.c
@@ -39,7 +39,6 @@
 #include <linux/pci_ids.h>
 #include <linux/smp_lock.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
index 676fcbb7902..8fb4200f83f 100644
--- a/drivers/media/dvb/ngene/ngene.h
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -725,6 +725,8 @@ struct ngene {
 	u32                   device_version;
 	u32                   fw_interface_version;
 	u32                   icounts;
+	bool                  msi_enabled;
+	bool                  cmd_timeout_workaround;
 
 	u8                   *CmdDoneByte;
 	int                   BootFirmware;
@@ -797,6 +799,7 @@ struct ngene_info {
 #define NGENE_VBOX_V2	 7
 
 	int   fw_version;
+	bool  msi_supported;
 	char *name;
 
 	int   io_type[MAX_STREAM];
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index cff77e2eb55..25b43e587fa 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -64,9 +64,11 @@ static struct sms_board sms_boards[] = {
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.rc_codes = RC_MAP_RC5_HAUPPAUGE_NEW,
 		.board_cfg.leds_power = 26,
 		.board_cfg.led0 = 27,
 		.board_cfg.led1 = 28,
+		.board_cfg.ir = 9,
 		.led_power = 26,
 		.led_lo    = 27,
 		.led_hi    = 28,
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
index 8f19fc000b4..d8cdf756f7c 100644
--- a/drivers/media/dvb/siano/sms-cards.h
+++ b/drivers/media/dvb/siano/sms-cards.h
@@ -75,7 +75,7 @@ struct sms_board {
 	enum sms_device_type_st type;
 	char *name, *fw[DEVICE_MODE_MAX];
 	struct sms_board_gpio_cfg board_cfg;
-	enum ir_kb_type ir_kb_type;
+	char *rc_codes;				/* Name of IR codes table */
 
 	/* gpios */
 	int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 0c87a3c3899..828bcc2e129 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -116,9 +116,7 @@ static struct smscore_registry_entry_t *smscore_find_registry(char *devpath)
 			return entry;
 		}
 	}
-	entry = (struct smscore_registry_entry_t *)
-			kmalloc(sizeof(struct smscore_registry_entry_t),
-				GFP_KERNEL);
+	entry = kmalloc(sizeof(struct smscore_registry_entry_t), GFP_KERNEL);
 	if (entry) {
 		entry->mode = default_mode;
 		strcpy(entry->devpath, devpath);
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index a56eac76e0f..d0e4639ee9d 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -4,6 +4,11 @@
  MDTV receiver kernel modules.
  Copyright (C) 2006-2009, Uri Shkolnik
 
+ Copyright (c) 2010 - Mauro Carvalho Chehab
+	- Ported the driver to use rc-core
+	- IR raw event decoding is now done at rc-core
+	- Code almost re-written
+
  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 2 of the License, or
@@ -27,226 +32,28 @@
 #include "smsir.h"
 #include "sms-cards.h"
 
-/* In order to add new IR remote control -
- * 1) Add it to the <enum ir_kb_type> @ smsir,h,
- * 2) Add its map to keyboard_layout_maps below
- * 3) Set your board (sms-cards sub-module) to use it
- */
-
-static struct keyboard_layout_map_t keyboard_layout_maps[] = {
-		[SMS_IR_KB_DEFAULT_TV] = {
-			.ir_protocol = IR_RC5,
-			.rc5_kbd_address = KEYBOARD_ADDRESS_TV1,
-			.keyboard_layout_map = {
-					KEY_0, KEY_1, KEY_2,
-					KEY_3, KEY_4, KEY_5,
-					KEY_6, KEY_7, KEY_8,
-					KEY_9, 0, 0, KEY_POWER,
-					KEY_MUTE, 0, 0,
-					KEY_VOLUMEUP, KEY_VOLUMEDOWN,
-					KEY_BRIGHTNESSUP,
-					KEY_BRIGHTNESSDOWN, KEY_CHANNELUP,
-					KEY_CHANNELDOWN,
-					0, 0, 0, 0, 0, 0, 0, 0,
-					0, 0, 0, 0, 0, 0, 0, 0,
-					0, 0, 0, 0, 0, 0, 0, 0,
-					0, 0, 0, 0, 0, 0, 0, 0,
-					0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-			}
-		},
-		[SMS_IR_KB_HCW_SILVER] = {
-			.ir_protocol = IR_RC5,
-			.rc5_kbd_address = KEYBOARD_ADDRESS_LIGHTING1,
-			.keyboard_layout_map = {
-					KEY_0, KEY_1, KEY_2,
-					KEY_3, KEY_4, KEY_5,
-					KEY_6, KEY_7, KEY_8,
-					KEY_9, KEY_TEXT, KEY_RED,
-					KEY_RADIO, KEY_MENU,
-					KEY_SUBTITLE,
-					KEY_MUTE, KEY_VOLUMEUP,
-					KEY_VOLUMEDOWN, KEY_PREVIOUS, 0,
-					KEY_UP, KEY_DOWN, KEY_LEFT,
-					KEY_RIGHT, KEY_VIDEO, KEY_AUDIO,
-					KEY_MHP, KEY_EPG, KEY_TV,
-					0, KEY_NEXTSONG, KEY_EXIT,
-					KEY_CHANNELUP, 	KEY_CHANNELDOWN,
-					KEY_CHANNEL, 0,
-					KEY_PREVIOUSSONG, KEY_ENTER,
-					KEY_SLEEP, 0, 0, KEY_BLUE,
-					0, 0, 0, 0, KEY_GREEN, 0,
-					KEY_PAUSE, 0, KEY_REWIND,
-					0, KEY_FASTFORWARD, KEY_PLAY,
-					KEY_STOP, KEY_RECORD,
-					KEY_YELLOW, 0, 0, KEY_SELECT,
-					KEY_ZOOM, KEY_POWER, 0, 0
-			}
-		},
-		{ } /* Terminating entry */
-};
-
-static u32 ir_pos;
-static u32 ir_word;
-static u32 ir_toggle;
-
-#define RC5_PUSH_BIT(dst, bit, pos)	\
-	{ dst <<= 1; dst |= bit; pos++; }
-
-
-static void sms_ir_rc5_event(struct smscore_device_t *coredev,
-				u32 toggle, u32 addr, u32 cmd)
-{
-	bool toggle_changed;
-	u16 keycode;
-
-	sms_log("IR RC5 word: address %d, command %d, toggle %d",
-				addr, cmd, toggle);
-
-	toggle_changed = ir_toggle != toggle;
-	/* keep toggle */
-	ir_toggle = toggle;
-
-	if (addr !=
-		keyboard_layout_maps[coredev->ir.ir_kb_type].rc5_kbd_address)
-		return; /* Check for valid address */
-
-	keycode =
-		keyboard_layout_maps
-		[coredev->ir.ir_kb_type].keyboard_layout_map[cmd];
+#define MODULE_NAME "smsmdtv"
 
-	if (!toggle_changed &&
-			(keycode != KEY_VOLUMEUP && keycode != KEY_VOLUMEDOWN))
-		return; /* accept only repeated volume, reject other keys */
-
-	sms_log("kernel input keycode (from ir) %d", keycode);
-	input_report_key(coredev->ir.input_dev, keycode, 1);
-	input_sync(coredev->ir.input_dev);
-
-}
-
-/* decode raw bit pattern to RC5 code */
-/* taken from ir-functions.c */
-static u32 ir_rc5_decode(unsigned int code)
+void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
 {
-/*	unsigned int org_code = code;*/
-	unsigned int pair;
-	unsigned int rc5 = 0;
 	int i;
+	const s32 *samples = (const void *)buf;
 
-	for (i = 0; i < 14; ++i) {
-		pair = code & 0x3;
-		code >>= 2;
-
-		rc5 <<= 1;
-		switch (pair) {
-		case 0:
-		case 2:
-			break;
-		case 1:
-			rc5 |= 1;
-			break;
-		case 3:
-/*	dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);*/
-			sms_log("bad code");
-			return 0;
-		}
-	}
-/*
-	dprintk(1, "ir-common: code=%x, rc5=%x, start=%x,
-		toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
-		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-*/
-	return rc5;
-}
-
-static void sms_rc5_parse_word(struct smscore_device_t *coredev)
-{
-	#define RC5_START(x)    (((x)>>12)&3)
-	#define RC5_TOGGLE(x)   (((x)>>11)&1)
-	#define RC5_ADDR(x)     (((x)>>6)&0x1F)
-	#define RC5_INSTR(x)    ((x)&0x3F)
-
-	int i, j;
-	u32 rc5_word = 0;
-
-	/* Reverse the IR word direction */
-	for (i = 0 ; i < 28 ; i++)
-		RC5_PUSH_BIT(rc5_word, (ir_word>>i)&1, j)
-
-	rc5_word = ir_rc5_decode(rc5_word);
-	/* sms_log("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */
-
-	sms_ir_rc5_event(coredev,
-				RC5_TOGGLE(rc5_word),
-				RC5_ADDR(rc5_word),
-				RC5_INSTR(rc5_word));
-}
-
-
-static void sms_rc5_accumulate_bits(struct smscore_device_t *coredev,
-		s32 ir_sample)
-{
-	#define RC5_TIME_GRANULARITY	200
-	#define RC5_DEF_BIT_TIME		889
-	#define RC5_MAX_SAME_BIT_CONT	4
-	#define RC5_WORD_LEN			27 /* 28 bit */
-
-	u32 i, j;
-	s32 delta_time;
-	u32 time = (ir_sample > 0) ? ir_sample : (0-ir_sample);
-	u32 level = (ir_sample < 0) ? 0 : 1;
-
-	for (i = RC5_MAX_SAME_BIT_CONT; i > 0; i--) {
-		delta_time = time - (i*RC5_DEF_BIT_TIME) + RC5_TIME_GRANULARITY;
-		if (delta_time < 0)
-			continue; /* not so many consecutive bits */
-		if (delta_time > (2 * RC5_TIME_GRANULARITY)) {
-			/* timeout */
-			if (ir_pos == (RC5_WORD_LEN-1))
-				/* complete last bit */
-				RC5_PUSH_BIT(ir_word, level, ir_pos)
-
-			if (ir_pos == RC5_WORD_LEN)
-				sms_rc5_parse_word(coredev);
-			else if (ir_pos) /* timeout within a word */
-				sms_log("IR error parsing a word");
+	for (i = 0; i < len >> 2; i++) {
+		struct ir_raw_event ev;
 
-			ir_pos = 0;
-			ir_word = 0;
-			/* sms_log("timeout %d", time); */
-			break;
-		}
-		/* The time is within the range of this number of bits */
-		for (j = 0 ; j < i ; j++)
-			RC5_PUSH_BIT(ir_word, level, ir_pos)
+		ev.duration = abs(samples[i]) * 1000; /* Convert to ns */
+		ev.pulse = (samples[i] > 0) ? false : true;
 
-		break;
+		ir_raw_event_store(coredev->ir.input_dev, &ev);
 	}
-}
-
-void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
-{
-	#define IR_DATA_RECEIVE_MAX_LEN	520 /* 128*4 + 4 + 4 */
-	u32 i;
-	enum ir_protocol ir_protocol =
-			keyboard_layout_maps[coredev->ir.ir_kb_type]
-					     .ir_protocol;
-	s32 *samples;
-	int count = len>>2;
-
-	samples = (s32 *)buf;
-/*	sms_log("IR buffer received, length = %d", count);*/
-
-	for (i = 0; i < count; i++)
-		if (ir_protocol == IR_RC5)
-			sms_rc5_accumulate_bits(coredev, samples[i]);
-	/*  IR_RCMM not implemented */
+	ir_raw_event_handle(coredev->ir.input_dev);
 }
 
 int sms_ir_init(struct smscore_device_t *coredev)
 {
 	struct input_dev *input_dev;
+	int board_id = smscore_get_board_id(coredev);
 
 	sms_log("Allocating input device");
 	input_dev = input_allocate_device();
@@ -256,33 +63,38 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	}
 
 	coredev->ir.input_dev = input_dev;
-	coredev->ir.ir_kb_type =
-		sms_get_board(smscore_get_board_id(coredev))->ir_kb_type;
-	coredev->ir.keyboard_layout_map =
-		keyboard_layout_maps[coredev->ir.ir_kb_type].
-				keyboard_layout_map;
-	sms_log("IR remote keyboard type is %d", coredev->ir.ir_kb_type);
 
 	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
 	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
 	sms_log("IR port %d, timeout %d ms",
 			coredev->ir.controller, coredev->ir.timeout);
 
-	snprintf(coredev->ir.name,
-				IR_DEV_NAME_MAX_LEN,
-				"SMS IR w/kbd type %d",
-				coredev->ir.ir_kb_type);
+	snprintf(coredev->ir.name, sizeof(coredev->ir.name),
+		 "SMS IR (%s)", sms_get_board(board_id)->name);
+
+	strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
+	strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
+
 	input_dev->name = coredev->ir.name;
-	input_dev->phys = coredev->ir.name;
+	input_dev->phys = coredev->ir.phys;
 	input_dev->dev.parent = coredev->device;
 
-	/* Key press events only */
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+#if 0
+	/* TODO: properly initialize the parameters bellow */
+	input_dev->id.bustype = BUS_USB;
+	input_dev->id.version = 1;
+	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+#endif
+
+	coredev->ir.props.priv = coredev;
+	coredev->ir.props.driver_type = RC_DRIVER_IR_RAW;
+	coredev->ir.props.allowed_protos = IR_TYPE_ALL;
 
 	sms_log("Input device (IR) %s is set for key events", input_dev->name);
 
-	if (input_register_device(input_dev)) {
+	if (ir_input_register(input_dev, sms_get_board(board_id)->rc_codes,
+			      &coredev->ir.props, MODULE_NAME)) {
 		sms_err("Failed to register device");
 		input_free_device(input_dev);
 		return -EACCES;
@@ -294,8 +106,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 void sms_ir_exit(struct smscore_device_t *coredev)
 {
 	if (coredev->ir.input_dev)
-		input_unregister_device(coredev->ir.input_dev);
+		ir_input_unregister(coredev->ir.input_dev);
 
 	sms_log("");
 }
-
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index b7d703e2d33..926e247523b 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -4,6 +4,11 @@ Siano Mobile Silicon, Inc.
 MDTV receiver kernel modules.
 Copyright (C) 2006-2009, Uri Shkolnik
 
+ Copyright (c) 2010 - Mauro Carvalho Chehab
+	- Ported the driver to use rc-core
+	- IR raw event decoding is now done at rc-core
+	- Code almost re-written
+
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
@@ -23,63 +28,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define __SMS_IR_H__
 
 #include <linux/input.h>
+#include <media/ir-core.h>
 
-#define IR_DEV_NAME_MAX_LEN		23 /* "SMS IR kbd type nn\0" */
-#define IR_KEYBOARD_LAYOUT_SIZE	64
 #define IR_DEFAULT_TIMEOUT		100
 
-enum ir_kb_type {
-	SMS_IR_KB_DEFAULT_TV,
-	SMS_IR_KB_HCW_SILVER
-};
-
-enum rc5_keyboard_address {
-	KEYBOARD_ADDRESS_TV1 = 0,
-	KEYBOARD_ADDRESS_TV2 = 1,
-	KEYBOARD_ADDRESS_TELETEXT = 2,
-	KEYBOARD_ADDRESS_VIDEO = 3,
-	KEYBOARD_ADDRESS_LV1 = 4,
-	KEYBOARD_ADDRESS_VCR1 = 5,
-	KEYBOARD_ADDRESS_VCR2 = 6,
-	KEYBOARD_ADDRESS_EXPERIMENTAL = 7,
-	KEYBOARD_ADDRESS_SAT1 = 8,
-	KEYBOARD_ADDRESS_CAMERA = 9,
-	KEYBOARD_ADDRESS_SAT2 = 10,
-	KEYBOARD_ADDRESS_CDV = 12,
-	KEYBOARD_ADDRESS_CAMCORDER = 13,
-	KEYBOARD_ADDRESS_PRE_AMP = 16,
-	KEYBOARD_ADDRESS_TUNER = 17,
-	KEYBOARD_ADDRESS_RECORDER1 = 18,
-	KEYBOARD_ADDRESS_PRE_AMP1 = 19,
-	KEYBOARD_ADDRESS_CD_PLAYER = 20,
-	KEYBOARD_ADDRESS_PHONO = 21,
-	KEYBOARD_ADDRESS_SATA = 22,
-	KEYBOARD_ADDRESS_RECORDER2 = 23,
-	KEYBOARD_ADDRESS_CDR = 26,
-	KEYBOARD_ADDRESS_LIGHTING = 29,
-	KEYBOARD_ADDRESS_LIGHTING1 = 30, /* KEYBOARD_ADDRESS_HCW_SILVER */
-	KEYBOARD_ADDRESS_PHONE = 31,
-	KEYBOARD_ADDRESS_NOT_RC5 = 0xFFFF
-};
-
-enum ir_protocol {
-	IR_RC5,
-	IR_RCMM
-};
-
-struct keyboard_layout_map_t {
-	enum ir_protocol ir_protocol;
-	enum rc5_keyboard_address rc5_kbd_address;
-	u16 keyboard_layout_map[IR_KEYBOARD_LAYOUT_SIZE];
-};
-
 struct smscore_device_t;
 
 struct ir_t {
 	struct input_dev *input_dev;
-	enum ir_kb_type ir_kb_type;
-	char name[IR_DEV_NAME_MAX_LEN+1];
-	u16 *keyboard_layout_map;
+	char name[40];
+	char phys[32];
+
+	char *rc_codes;
+	u64 protocol;
+	struct ir_dev_props props;
+
 	u32 timeout;
 	u32 controller;
 };
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index a9c27fb69ba..50d4338610e 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -352,8 +352,7 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id)
 	params.num_buffers = MAX_BUFFERS;
 	params.sendrequest_handler = smsusb_sendrequest;
 	params.context = dev;
-	snprintf(params.devpath, sizeof(params.devpath),
-		 "usb\\%d-%s", dev->udev->bus->busnum, dev->udev->devpath);
+	usb_make_path(dev->udev, params.devpath, sizeof(params.devpath));
 
 	/* register in smscore */
 	rc = smscore_register_device(&params, &dev->coredev);
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index d8d4214fd65..32a7ec65ec4 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -68,13 +68,14 @@ config DVB_BUDGET
 	select DVB_VES1820 if !DVB_FE_CUSTOMISE
 	select DVB_L64781 if !DVB_FE_CUSTOMISE
 	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if !DVB_FE_CUSTOMISE
+	select DVB_STV6110x if !DVB_FE_CUSTOMISE
 	help
 	  Support for simple SAA7146 based DVB cards (so called Budget-
 	  or Nova-PCI cards) without onboard MPEG2 decoder, and without
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 46171439633..13ac9e3ab12 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -215,6 +215,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 		break;
 	case 0x1010:
 	case 0x1017:
+	case 0x1019:
 	case 0x101a:
 		/* for the Technotrend 1500 bundled remote */
 		ir_codes = RC_MAP_TT_1500;
diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c
index 47075fc71f1..9927a595b42 100644
--- a/drivers/media/radio/si470x/radio-si470x-common.c
+++ b/drivers/media/radio/si470x/radio-si470x-common.c
@@ -748,7 +748,7 @@ static int si470x_vidioc_s_tuner(struct file *file, void *priv,
 		struct v4l2_tuner *tuner)
 {
 	struct si470x_device *radio = video_drvdata(file);
-	int retval = -EINVAL;
+	int retval = 0;
 
 	/* safety checks */
 	retval = si470x_disconnect_check(radio);
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a5844d08d8b..67a4ec8768a 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -482,7 +482,6 @@ static __devexit int si470x_i2c_remove(struct i2c_client *client)
 	cancel_work_sync(&radio->radio_work);
 	video_unregister_device(radio->videodev);
 	kfree(radio);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index ab63dd5b25c..fc7f4b79464 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -1009,8 +1009,10 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 			goto exit;
 		}
 		rval = copy_from_user(ps_name, control->string, len);
-		if (rval < 0)
+		if (rval) {
+			rval = -EFAULT;
 			goto exit;
+		}
 		ps_name[len] = '\0';
 
 		if (strlen(ps_name) % vqc.step) {
@@ -1031,8 +1033,10 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 			goto exit;
 		}
 		rval = copy_from_user(radio_text, control->string, len);
-		if (rval < 0)
+		if (rval) {
+			rval = -EFAULT;
 			goto exit;
+		}
 		radio_text[len] = '\0';
 
 		if (strlen(radio_text) % vqc.step) {
@@ -1367,6 +1371,8 @@ static int si4713_read_econtrol_string(struct si4713_device *sdev,
 		}
 		rval = copy_to_user(control->string, sdev->rds_info.ps_name,
 					strlen(sdev->rds_info.ps_name) + 1);
+		if (rval)
+			rval = -EFAULT;
 		break;
 
 	case V4L2_CID_RDS_TX_RADIO_TEXT:
@@ -1377,6 +1383,8 @@ static int si4713_read_econtrol_string(struct si4713_device *sdev,
 		}
 		rval = copy_to_user(control->string, sdev->rds_info.radio_text,
 					strlen(sdev->rds_info.radio_text) + 1);
+		if (rval)
+			rval = -EFAULT;
 		break;
 
 	default:
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ad9e6f9c22e..2e15903b976 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -517,19 +517,6 @@ config VIDEO_UPD64083
 
 endmenu # encoder / decoder chips
 
-config DISPLAY_DAVINCI_DM646X_EVM
-	tristate "DM646x EVM Video Display"
-	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
-	select VIDEOBUF_DMA_CONTIG
-	select VIDEO_DAVINCI_VPIF
-	select VIDEO_ADV7343
-	select VIDEO_THS7303
-	help
-	  Support for DM6467 based display device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif_display.
-
 config VIDEO_SH_VOU
 	tristate "SuperH VOU video output driver"
 	depends on VIDEO_DEV && ARCH_SHMOBILE
@@ -537,29 +524,22 @@ config VIDEO_SH_VOU
 	help
 	  Support for the Video Output Unit (VOU) on SuperH SoCs.
 
-config CAPTURE_DAVINCI_DM646X_EVM
-	tristate "DM646x EVM Video Capture"
-	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+config VIDEO_VIU
+	tristate "Freescale VIU Video Driver"
+	depends on VIDEO_V4L2 && PPC_MPC512x
 	select VIDEOBUF_DMA_CONTIG
-	select VIDEO_DAVINCI_VPIF
-	help
-	  Support for DM6467 based capture device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif_capture.
-
-config VIDEO_DAVINCI_VPIF
-	tristate "DaVinci VPIF Driver"
-	depends on DISPLAY_DAVINCI_DM646X_EVM
-	help
-	  Support for DaVinci VPIF Driver.
+	default y
+	---help---
+	  Support for Freescale VIU video driver. This device captures
+	  video data, or overlays video on DIU frame buffer.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif.
+	  Say Y here if you want to enable VIU device on MPC5121e Rev2+.
+	  In doubt, say N.
 
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FONTS
+	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+	depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS
 	select FONT_8x16
 	select VIDEOBUF_VMALLOC
 	default n
@@ -570,66 +550,7 @@ config VIDEO_VIVI
 	  Say Y here if you want to test video apps or debug V4L devices.
 	  In doubt, say N.
 
-config VIDEO_VPSS_SYSTEM
-	tristate "VPSS System module driver"
-	depends on ARCH_DAVINCI
-	help
-	  Support for vpss system module for video driver
-
-config VIDEO_VPFE_CAPTURE
-	tristate "VPFE Video Capture Driver"
-	depends on VIDEO_V4L2 && ARCH_DAVINCI
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Support for DMXXXX VPFE based frame grabber. This is the
-	  common V4L2 module for following DMXXX SoCs from Texas
-	  Instruments:- DM6446 & DM355.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpfe-capture.
-
-config VIDEO_DM6446_CCDC
-	tristate "DM6446 CCDC HW module"
-	depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
-	   with decoder modules such as TVP5146 over BT656 or
-	   sensor module such as MT9T001 over a raw interface. This
-	   module configures the interface and CCDC/ISIF to do
-	   video frame capture from slave decoders.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
-
-config VIDEO_DM355_CCDC
-	tristate "DM355 CCDC HW module"
-	depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
-	   with decoder modules such as TVP5146 over BT656 or
-	   sensor module such as MT9T001 over a raw interface. This
-	   module configures the interface and CCDC/ISIF to do
-	   video frame capture from a slave decoders
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
-
-config VIDEO_ISIF
-	tristate "ISIF HW module"
-	depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables ISIF hw module. This is the hardware module for
-	   configuring ISIF in VPFE to capture Raw Bayer RGB data  from
-	   a image sensor or YUV data from a YUV source.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
+source "drivers/media/video/davinci/Kconfig"
 
 source "drivers/media/video/omap/Kconfig"
 
@@ -646,7 +567,7 @@ config VIDEO_PMS
 
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
-	depends on PARPORT && VIDEO_V4L1
+	depends on PARPORT && VIDEO_V4L2
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
@@ -656,7 +577,7 @@ config VIDEO_BWQCAM
 
 config VIDEO_CQCAM
 	tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
+	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
 	help
 	  This is the video4linux driver for the colour version of the
 	  Connectix QuickCam.  If you have one of these cameras, say Y here,
@@ -955,6 +876,12 @@ config VIDEO_PXA27x
 	---help---
 	  This is a v4l2 driver for the PXA27x Quick Capture Interface
 
+config VIDEO_SH_MOBILE_CSI2
+	tristate "SuperH Mobile MIPI CSI-2 Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
+	---help---
+	  This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
+
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
 	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
@@ -969,6 +896,19 @@ config VIDEO_OMAP2
 	---help---
 	  This is a v4l2 driver for the TI OMAP2 camera capture interface
 
+config VIDEO_MX2_HOSTSUPPORT
+        bool
+
+config VIDEO_MX2
+	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_MX2_HOSTSUPPORT
+	---help---
+	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+	  Interface
+
+
 #
 # USB Multimedia device configuration
 #
@@ -1000,61 +940,6 @@ source "drivers/media/video/usbvideo/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"
 
-config VIDEO_OVCAMCHIP
-	tristate "OmniVision Camera Chip support (DEPRECATED)"
-	depends on I2C && VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca ov519 module
-	  instead. Note that for the ov511 / ov518 support of the gspca module
-	  you need atleast version 0.6.0 of libv4l and for the w9968cf
-	  atleast version 0.6.3 of libv4l.
-
-	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
-	  This driver is intended to be used with the ov511 and w9968cf USB
-	  camera drivers.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ovcamchip.
-
-config USB_W9968CF
-	tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
-	depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca ov519 module
-	  instead. Note that for the w9968cf support of the gspca module
-	  you need atleast version 0.6.3 of libv4l.
-
-	  Say Y here if you want support for cameras based on OV681 or
-	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
-
-	  This driver has an optional plugin, which is distributed as a
-	  separate module only (released under GPL). It allows to use higher
-	  resolutions and framerates, but cannot be included in the official
-	  Linux kernel for performance purposes.
-
-	  See <file:Documentation/video4linux/w9968cf.txt> for more info.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called w9968cf.
-
-config USB_OV511
-	tristate "USB OV511 Camera support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca ov519 module
-	  instead. Note that for the ov511 / ov518 support of the gspca module
-	  you need atleast version 0.6.0 of libv4l.
-
-	  Say Y here if you want to connect this type of camera to your
-	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
-	  for more information and for a list of supported cameras.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ov511.
-
 config USB_SE401
 	tristate "USB SE401 Camera support"
 	depends on VIDEO_V4L1
@@ -1068,25 +953,6 @@ config USB_SE401
 
 source "drivers/media/video/sn9c102/Kconfig"
 
-config USB_STV680
-	tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca stv0680 module
-	  instead. Note that for the gspca stv0680 module you need
-	  atleast version 0.6.3 of libv4l.
-
-	  Say Y here if you want to connect this type of camera to your
-	  computer's USB port. This includes the Pencam line of cameras.
-	  See <file:Documentation/video4linux/stv680.txt> for more information
-	  and for a list of supported cameras.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called stv680.
-
-source "drivers/media/video/zc0301/Kconfig"
-
 source "drivers/media/video/pwc/Kconfig"
 
 config USB_ZR364XX
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index cc93859d316..1051ecc602e 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
@@ -127,17 +126,13 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
-obj-$(CONFIG_USB_OV511)         += ov511.o
 obj-$(CONFIG_USB_SE401)         += se401.o
-obj-$(CONFIG_USB_STV680)        += stv680.o
-obj-$(CONFIG_USB_W9968CF)       += w9968cf.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
 obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
 obj-$(CONFIG_USB_SN9C102)       += sn9c102/
 obj-$(CONFIG_USB_ET61X251)      += et61x251/
 obj-$(CONFIG_USB_PWC)           += pwc/
-obj-$(CONFIG_USB_ZC0301)        += zc0301/
 obj-$(CONFIG_USB_GSPCA)         += gspca/
 
 obj-$(CONFIG_VIDEO_HDPVR)	+= hdpvr/
@@ -151,6 +146,7 @@ obj-$(CONFIG_USB_S2255)		+= s2255drv.o
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
 obj-$(CONFIG_VIDEO_CX18) += cx18/
 
+obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
 obj-$(CONFIG_VIDEO_CX23885) += cx23885/
@@ -162,8 +158,10 @@ obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o soc_mediabus.o
 obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
 # soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
+obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
+obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
 
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
@@ -177,7 +175,7 @@ obj-$(CONFIG_VIDEO_SAA7164)     += saa7164/
 
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 
-obj-$(CONFIG_ARCH_DAVINCI)	+= davinci/
+obj-y	+= davinci/
 
 obj-$(CONFIG_ARCH_OMAP)	+= omap/
 
diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
index 35390d4717b..b388654d48c 100644
--- a/drivers/media/video/ak881x.c
+++ b/drivers/media/video/ak881x.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/videodev2.h>
 
 #include <media/ak881x.h>
@@ -125,7 +126,7 @@ static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd,
 	v4l_bound_align_image(&mf->width, 0, 720, 2,
 			      &mf->height, 0, ak881x->lines, 1, 0);
 	mf->field	= V4L2_FIELD_INTERLACED;
-	mf->code	= V4L2_MBUS_FMT_YUYV8_2X8_LE;
+	mf->code	= V4L2_MBUS_FMT_YUYV8_2X8;
 	mf->colorspace	= V4L2_COLORSPACE_SMPTE170M;
 
 	return 0;
@@ -135,19 +136,19 @@ static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd,
 			     struct v4l2_mbus_framefmt *mf)
 {
 	if (mf->field != V4L2_FIELD_INTERLACED ||
-	    mf->code != V4L2_MBUS_FMT_YUYV8_2X8_LE)
+	    mf->code != V4L2_MBUS_FMT_YUYV8_2X8)
 		return -EINVAL;
 
 	return ak881x_try_g_mbus_fmt(sd, mf);
 }
 
-static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, int index,
+static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
 				enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
 		return -EINVAL;
 
-	*code = V4L2_MBUS_FMT_YUYV8_2X8_LE;
+	*code = V4L2_MBUS_FMT_YUYV8_2X8;
 	return 0;
 }
 
diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/video/au0828/Makefile
index 4d262315818..5c7f2f7d980 100644
--- a/drivers/media/video/au0828/Makefile
+++ b/drivers/media/video/au0828/Makefile
@@ -1,4 +1,4 @@
-au0828-objs	:= au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o
+au0828-objs	:= au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o au0828-vbi.o
 
 obj-$(CONFIG_VIDEO_AU0828) += au0828.o
 
diff --git a/drivers/media/video/au0828/au0828-vbi.c b/drivers/media/video/au0828/au0828-vbi.c
new file mode 100644
index 00000000000..63f593070ee
--- /dev/null
+++ b/drivers/media/video/au0828/au0828-vbi.c
@@ -0,0 +1,138 @@
+/*
+   au0828-vbi.c - VBI driver for au0828
+
+   Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+
+   This work was sponsored by GetWellNetwork Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+   02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include "au0828.h"
+
+static unsigned int vbibufs = 5;
+module_param(vbibufs, int, 0644);
+MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32");
+
+/* ------------------------------------------------------------------ */
+
+static void
+free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf)
+{
+	struct au0828_fh     *fh  = vq->priv_data;
+	struct au0828_dev    *dev = fh->dev;
+	unsigned long flags = 0;
+	if (in_interrupt())
+		BUG();
+
+	/* We used to wait for the buffer to finish here, but this didn't work
+	   because, as we were keeping the state as VIDEOBUF_QUEUED,
+	   videobuf_queue_cancel marked it as finished for us.
+	   (Also, it could wedge forever if the hardware was misconfigured.)
+
+	   This should be safe; by the time we get here, the buffer isn't
+	   queued anymore. If we ever start marking the buffers as
+	   VIDEOBUF_ACTIVE, it won't be, though.
+	*/
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.vbi_buf == buf)
+		dev->isoc_ctl.vbi_buf = NULL;
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	videobuf_vmalloc_free(&buf->vb);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int
+vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	struct au0828_fh     *fh  = q->priv_data;
+	struct au0828_dev    *dev = fh->dev;
+
+	*size = dev->vbi_width * dev->vbi_height * 2;
+
+	if (0 == *count)
+		*count = vbibufs;
+	if (*count < 2)
+		*count = 2;
+	if (*count > 32)
+		*count = 32;
+	return 0;
+}
+
+static int
+vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+	    enum v4l2_field field)
+{
+	struct au0828_fh     *fh  = q->priv_data;
+	struct au0828_dev    *dev = fh->dev;
+	struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb);
+	int                  rc = 0;
+
+	buf->vb.size = dev->vbi_width * dev->vbi_height * 2;
+
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	buf->vb.width  = dev->vbi_width;
+	buf->vb.height = dev->vbi_height;
+	buf->vb.field  = field;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (rc < 0)
+			goto fail;
+	}
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	free_buffer(q, buf);
+	return rc;
+}
+
+static void
+vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct au0828_buffer    *buf     = container_of(vb,
+							struct au0828_buffer,
+							vb);
+	struct au0828_fh        *fh      = vq->priv_data;
+	struct au0828_dev       *dev     = fh->dev;
+	struct au0828_dmaqueue  *vbiq    = &dev->vbiq;
+
+	buf->vb.state = VIDEOBUF_QUEUED;
+	list_add_tail(&buf->vb.queue, &vbiq->active);
+}
+
+static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb);
+	free_buffer(q, buf);
+}
+
+struct videobuf_queue_ops au0828_vbi_qops = {
+	.buf_setup    = vbi_setup,
+	.buf_prepare  = vbi_prepare,
+	.buf_queue    = vbi_queue,
+	.buf_release  = vbi_release,
+};
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 52f25aabb6d..7989a7ba7c4 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -314,6 +314,23 @@ static inline void buffer_filled(struct au0828_dev *dev,
 	wake_up(&buf->vb.done);
 }
 
+static inline void vbi_buffer_filled(struct au0828_dev *dev,
+				     struct au0828_dmaqueue *dma_q,
+				     struct au0828_buffer *buf)
+{
+	/* Advice that buffer was filled */
+	au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i);
+
+	buf->vb.state = VIDEOBUF_DONE;
+	buf->vb.field_count++;
+	do_gettimeofday(&buf->vb.ts);
+
+	dev->isoc_ctl.vbi_buf = NULL;
+
+	list_del(&buf->vb.queue);
+	wake_up(&buf->vb.done);
+}
+
 /*
  * Identify the buffer header type and properly handles
  */
@@ -327,6 +344,9 @@ static void au0828_copy_video(struct au0828_dev *dev,
 	int  linesdone, currlinedone, offset, lencopy, remain;
 	int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */
 
+	if (len == 0)
+		return;
+
 	if (dma_q->pos + len > buf->vb.size)
 		len = buf->vb.size - dma_q->pos;
 
@@ -414,17 +434,98 @@ static inline void get_next_buf(struct au0828_dmaqueue *dma_q,
 	return;
 }
 
+static void au0828_copy_vbi(struct au0828_dev *dev,
+			      struct au0828_dmaqueue  *dma_q,
+			      struct au0828_buffer *buf,
+			      unsigned char *p,
+			      unsigned char *outp, unsigned long len)
+{
+	unsigned char *startwrite, *startread;
+	int bytesperline;
+	int i, j = 0;
+
+	if (dev == NULL) {
+		au0828_isocdbg("dev is null\n");
+		return;
+	}
+
+	if (dma_q == NULL) {
+		au0828_isocdbg("dma_q is null\n");
+		return;
+	}
+	if (buf == NULL)
+		return;
+	if (p == NULL) {
+		au0828_isocdbg("p is null\n");
+		return;
+	}
+	if (outp == NULL) {
+		au0828_isocdbg("outp is null\n");
+		return;
+	}
+
+	bytesperline = dev->vbi_width;
+
+	if (dma_q->pos + len > buf->vb.size)
+		len = buf->vb.size - dma_q->pos;
+
+	startread = p;
+	startwrite = outp + (dma_q->pos / 2);
+
+	/* Make sure the bottom field populates the second half of the frame */
+	if (buf->top_field == 0)
+		startwrite += bytesperline * dev->vbi_height;
+
+	for (i = 0; i < len; i += 2)
+		startwrite[j++] = startread[i+1];
+
+	dma_q->pos += len;
+}
+
+
+/*
+ * video-buf generic routine to get the next available VBI buffer
+ */
+static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
+				    struct au0828_buffer **buf)
+{
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq);
+	char *outp;
+
+	if (list_empty(&dma_q->active)) {
+		au0828_isocdbg("No active queue to serve\n");
+		dev->isoc_ctl.vbi_buf = NULL;
+		*buf = NULL;
+		return;
+	}
+
+	/* Get the next buffer */
+	*buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
+	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	outp = videobuf_to_vmalloc(&(*buf)->vb);
+	memset(outp, 0x00, (*buf)->vb.size);
+
+	dev->isoc_ctl.vbi_buf = *buf;
+
+	return;
+}
+
 /*
  * Controls the isoc copy of each urb packet
  */
 static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 {
 	struct au0828_buffer    *buf;
+	struct au0828_buffer    *vbi_buf;
 	struct au0828_dmaqueue  *dma_q = urb->context;
+	struct au0828_dmaqueue  *vbi_dma_q = &dev->vbiq;
 	unsigned char *outp = NULL;
+	unsigned char *vbioutp = NULL;
 	int i, len = 0, rc = 1;
 	unsigned char *p;
 	unsigned char fbyte;
+	unsigned int vbi_field_size;
+	unsigned int remain, lencopy;
 
 	if (!dev)
 		return 0;
@@ -443,6 +544,10 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 	if (buf != NULL)
 		outp = videobuf_to_vmalloc(&buf->vb);
 
+	vbi_buf = dev->isoc_ctl.vbi_buf;
+	if (vbi_buf != NULL)
+		vbioutp = videobuf_to_vmalloc(&vbi_buf->vb);
+
 	for (i = 0; i < urb->number_of_packets; i++) {
 		int status = urb->iso_frame_desc[i].status;
 
@@ -472,6 +577,19 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 			au0828_isocdbg("Video frame %s\n",
 				       (fbyte & 0x40) ? "odd" : "even");
 			if (!(fbyte & 0x40)) {
+				/* VBI */
+				if (vbi_buf != NULL)
+					vbi_buffer_filled(dev,
+							  vbi_dma_q,
+							  vbi_buf);
+				vbi_get_next_buf(vbi_dma_q, &vbi_buf);
+				if (vbi_buf == NULL)
+					vbioutp = NULL;
+				else
+					vbioutp = videobuf_to_vmalloc(
+						&vbi_buf->vb);
+
+				/* Video */
 				if (buf != NULL)
 					buffer_filled(dev, dma_q, buf);
 				get_next_buf(dma_q, &buf);
@@ -488,9 +606,36 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 					buf->top_field = 0;
 			}
 
+			if (vbi_buf != NULL) {
+				if (fbyte & 0x40)
+					vbi_buf->top_field = 1;
+				else
+					vbi_buf->top_field = 0;
+			}
+
+			dev->vbi_read = 0;
+			vbi_dma_q->pos = 0;
 			dma_q->pos = 0;
 		}
-		if (buf != NULL)
+
+		vbi_field_size = dev->vbi_width * dev->vbi_height * 2;
+		if (dev->vbi_read < vbi_field_size) {
+			remain  = vbi_field_size - dev->vbi_read;
+			if (len < remain)
+				lencopy = len;
+			else
+				lencopy = remain;
+
+			if (vbi_buf != NULL)
+				au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p,
+						vbioutp, len);
+
+			len -= lencopy;
+			p += lencopy;
+			dev->vbi_read += lencopy;
+		}
+
+		if (dev->vbi_read >= vbi_field_size && buf != NULL)
 			au0828_copy_video(dev, dma_q, buf, p, outp, len);
 	}
 	return rc;
@@ -642,7 +787,7 @@ int au0828_analog_stream_enable(struct au0828_dev *d)
 	au0828_writereg(d, 0x114, 0xa0);
 	au0828_writereg(d, 0x115, 0x05);
 	/* set y position */
-	au0828_writereg(d, 0x112, 0x02);
+	au0828_writereg(d, 0x112, 0x00);
 	au0828_writereg(d, 0x113, 0x00);
 	au0828_writereg(d, 0x116, 0xf2);
 	au0828_writereg(d, 0x117, 0x00);
@@ -703,47 +848,83 @@ void au0828_analog_unregister(struct au0828_dev *dev)
 
 
 /* Usage lock check functions */
-static int res_get(struct au0828_fh *fh)
+static int res_get(struct au0828_fh *fh, unsigned int bit)
 {
-	struct au0828_dev *dev = fh->dev;
-	int		 rc   = 0;
+	struct au0828_dev    *dev = fh->dev;
 
-	/* This instance already has stream_on */
-	if (fh->stream_on)
-		return rc;
+	if (fh->resources & bit)
+		/* have it already allocated */
+		return 1;
 
-	if (dev->stream_on)
-		return -EBUSY;
+	/* is it free? */
+	mutex_lock(&dev->lock);
+	if (dev->resources & bit) {
+		/* no, someone else uses it */
+		mutex_unlock(&dev->lock);
+		return 0;
+	}
+	/* it's free, grab it */
+	fh->resources  |= bit;
+	dev->resources |= bit;
+	dprintk(1, "res: get %d\n", bit);
+	mutex_unlock(&dev->lock);
+	return 1;
+}
 
-	dev->stream_on = 1;
-	fh->stream_on  = 1;
-	return rc;
+static int res_check(struct au0828_fh *fh, unsigned int bit)
+{
+	return fh->resources & bit;
 }
 
-static int res_check(struct au0828_fh *fh)
+static int res_locked(struct au0828_dev *dev, unsigned int bit)
 {
-	return fh->stream_on;
+	return dev->resources & bit;
 }
 
-static void res_free(struct au0828_fh *fh)
+static void res_free(struct au0828_fh *fh, unsigned int bits)
 {
-	struct au0828_dev *dev = fh->dev;
+	struct au0828_dev    *dev = fh->dev;
 
-	fh->stream_on = 0;
-	dev->stream_on = 0;
+	BUG_ON((fh->resources & bits) != bits);
+
+	mutex_lock(&dev->lock);
+	fh->resources  &= ~bits;
+	dev->resources &= ~bits;
+	dprintk(1, "res: put %d\n", bits);
+	mutex_unlock(&dev->lock);
+}
+
+static int get_ressource(struct au0828_fh *fh)
+{
+	switch (fh->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return AU0828_RESOURCE_VIDEO;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		return AU0828_RESOURCE_VBI;
+	default:
+		BUG();
+		return 0;
+	}
 }
 
 static int au0828_v4l2_open(struct file *filp)
 {
 	int ret = 0;
+	struct video_device *vdev = video_devdata(filp);
 	struct au0828_dev *dev = video_drvdata(filp);
 	struct au0828_fh *fh;
-	int type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	int type;
 
-#ifdef VBI_IS_WORKING
-	if (video_devdata(filp)->vfl_type == VFL_TYPE_GRABBER)
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER:
+		type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		break;
+	case VFL_TYPE_VBI:
 		type = V4L2_BUF_TYPE_VBI_CAPTURE;
-#endif
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL);
 	if (NULL == fh) {
@@ -781,10 +962,21 @@ static int au0828_v4l2_open(struct file *filp)
 	dev->users++;
 
 	videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops,
-				    NULL, &dev->slock, fh->type,
+				    NULL, &dev->slock,
+				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				    V4L2_FIELD_INTERLACED,
 				    sizeof(struct au0828_buffer), fh);
 
+	/* VBI Setup */
+	dev->vbi_width = 720;
+	dev->vbi_height = 1;
+	videobuf_queue_vmalloc_init(&fh->vb_vbiq, &au0828_vbi_qops,
+				    NULL, &dev->slock,
+				    V4L2_BUF_TYPE_VBI_CAPTURE,
+				    V4L2_FIELD_SEQ_TB,
+				    sizeof(struct au0828_buffer), fh);
+
+
 	return ret;
 }
 
@@ -794,17 +986,19 @@ static int au0828_v4l2_close(struct file *filp)
 	struct au0828_fh *fh = filp->private_data;
 	struct au0828_dev *dev = fh->dev;
 
-	mutex_lock(&dev->lock);
-	if (res_check(fh))
-		res_free(fh);
-
-	if (dev->users == 1) {
+	if (res_check(fh, AU0828_RESOURCE_VIDEO)) {
 		videobuf_stop(&fh->vb_vidq);
-		videobuf_mmap_free(&fh->vb_vidq);
+		res_free(fh, AU0828_RESOURCE_VIDEO);
+	}
+
+	if (res_check(fh, AU0828_RESOURCE_VBI)) {
+		videobuf_stop(&fh->vb_vbiq);
+		res_free(fh, AU0828_RESOURCE_VBI);
+	}
 
+	if (dev->users == 1) {
 		if (dev->dev_state & DEV_DISCONNECTED) {
 			au0828_analog_unregister(dev);
-			mutex_unlock(&dev->lock);
 			kfree(dev);
 			return 0;
 		}
@@ -823,10 +1017,11 @@ static int au0828_v4l2_close(struct file *filp)
 			printk(KERN_INFO "Au0828 can't set alternate to 0!\n");
 	}
 
+	videobuf_mmap_free(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vbiq);
 	kfree(fh);
 	dev->users--;
 	wake_up_interruptible_nr(&dev->open, 1);
-	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -842,16 +1037,21 @@ static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf,
 		return rc;
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		mutex_lock(&dev->lock);
-		rc = res_get(fh);
-		mutex_unlock(&dev->lock);
-
-		if (unlikely(rc < 0))
-			return rc;
+		if (res_locked(dev, AU0828_RESOURCE_VIDEO))
+			return -EBUSY;
 
 		return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
 					filp->f_flags & O_NONBLOCK);
 	}
+
+	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		if (!res_get(fh, AU0828_RESOURCE_VBI))
+			return -EBUSY;
+
+		return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0,
+					    filp->f_flags & O_NONBLOCK);
+	}
+
 	return 0;
 }
 
@@ -865,17 +1065,17 @@ static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait)
 	if (rc < 0)
 		return rc;
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
-	mutex_unlock(&dev->lock);
-
-	if (unlikely(rc < 0))
-		return POLLERR;
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		if (!res_get(fh, AU0828_RESOURCE_VIDEO))
+			return POLLERR;
+		return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		if (!res_get(fh, AU0828_RESOURCE_VBI))
+			return POLLERR;
+		return videobuf_poll_stream(filp, &fh->vb_vbiq, wait);
+	} else {
 		return POLLERR;
-
-	return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
+	}
 }
 
 static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
@@ -888,14 +1088,10 @@ static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
 	if (rc < 0)
 		return rc;
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
-	mutex_unlock(&dev->lock);
-
-	if (unlikely(rc < 0))
-		return rc;
-
-	rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma);
 
 	return rc;
 }
@@ -911,14 +1107,6 @@ static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd,
 	maxwidth = 720;
 	maxheight = 480;
 
-#ifdef VBI_IS_WORKING
-	if (format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
-		dprintk(1, "VBI format set: to be supported!\n");
-		return 0;
-	}
-	if (format->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return 0;
-#endif
 	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
@@ -999,9 +1187,7 @@ static int vidioc_querycap(struct file *file, void  *priv,
 
 	/*set the device capabilities */
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
-#ifdef VBI_IS_WORKING
 		V4L2_CAP_VBI_CAPTURE |
-#endif
 		V4L2_CAP_AUDIO |
 		V4L2_CAP_READWRITE |
 		V4L2_CAP_STREAMING |
@@ -1056,20 +1242,21 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct au0828_dev *dev = fh->dev;
 	int rc;
 
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	mutex_lock(&dev->lock);
+
 	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
 		printk(KERN_INFO "%s queue busy\n", __func__);
 		rc = -EBUSY;
 		goto out;
 	}
 
-	if (dev->stream_on && !fh->stream_on) {
-		printk(KERN_INFO "%s device in use by another fh\n", __func__);
-		rc = -EBUSY;
-		goto out;
-	}
-
-	return au0828_set_format(dev, VIDIOC_S_FMT, f);
+	rc = au0828_set_format(dev, VIDIOC_S_FMT, f);
 out:
+	mutex_unlock(&dev->lock);
 	return rc;
 }
 
@@ -1300,6 +1487,29 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 	return 0;
 }
 
+
+/* RAW VBI ioctls */
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
+				struct v4l2_format *format)
+{
+	struct au0828_fh      *fh  = priv;
+	struct au0828_dev     *dev = fh->dev;
+
+	format->fmt.vbi.samples_per_line = dev->vbi_width;
+	format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	format->fmt.vbi.offset = 0;
+	format->fmt.vbi.flags = 0;
+	format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+
+	format->fmt.vbi.count[0] = dev->vbi_height;
+	format->fmt.vbi.count[1] = dev->vbi_height;
+	format->fmt.vbi.start[0] = 21;
+	format->fmt.vbi.start[1] = 284;
+
+	return 0;
+}
+
 static int vidioc_g_chip_ident(struct file *file, void *priv,
 	       struct v4l2_dbg_chip_ident *chip)
 {
@@ -1345,25 +1555,32 @@ static int vidioc_cropcap(struct file *file, void *priv,
 static int vidioc_streamon(struct file *file, void *priv,
 			   enum v4l2_buf_type type)
 {
-	struct au0828_fh *fh = priv;
-	struct au0828_dev *dev = fh->dev;
-	int rc;
+	struct au0828_fh      *fh  = priv;
+	struct au0828_dev     *dev = fh->dev;
+	int                   rc = -EINVAL;
 
 	rc = check_dev(dev);
 	if (rc < 0)
 		return rc;
 
+	if (unlikely(type != fh->type))
+		return -EINVAL;
+
+	dprintk(1, "vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n",
+		fh, type, fh->resources, dev->resources);
+
+	if (unlikely(!res_get(fh, get_ressource(fh))))
+		return -EBUSY;
+
 	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		au0828_analog_stream_enable(dev);
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
 	}
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
-
-	if (likely(rc >= 0))
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		rc = videobuf_streamon(&fh->vb_vidq);
-	mutex_unlock(&dev->lock);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_streamon(&fh->vb_vbiq);
 
 	return rc;
 }
@@ -1371,38 +1588,42 @@ static int vidioc_streamon(struct file *file, void *priv,
 static int vidioc_streamoff(struct file *file, void *priv,
 			    enum v4l2_buf_type type)
 {
-	struct au0828_fh *fh = priv;
-	struct au0828_dev *dev = fh->dev;
-	int i;
-	int ret;
-	int rc;
+	struct au0828_fh      *fh  = priv;
+	struct au0828_dev     *dev = fh->dev;
+	int                   rc;
+	int                   i;
 
 	rc = check_dev(dev);
 	if (rc < 0)
 		return rc;
 
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
+	    fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)
 		return -EINVAL;
 	if (type != fh->type)
 		return -EINVAL;
 
-	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+	dprintk(1, "vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n",
+		fh, type, fh->resources, dev->resources);
+
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
-		ret = au0828_stream_interrupt(dev);
-		if (ret != 0)
-			return ret;
-	}
+		rc = au0828_stream_interrupt(dev);
+		if (rc != 0)
+			return rc;
 
-	for (i = 0; i < AU0828_MAX_INPUT; i++) {
-		if (AUVI_INPUT(i).audio_setup == NULL)
-			continue;
-		(AUVI_INPUT(i).audio_setup)(dev, 0);
-	}
+		for (i = 0; i < AU0828_MAX_INPUT; i++) {
+			if (AUVI_INPUT(i).audio_setup == NULL)
+				continue;
+			(AUVI_INPUT(i).audio_setup)(dev, 0);
+		}
 
-	mutex_lock(&dev->lock);
-	videobuf_streamoff(&fh->vb_vidq);
-	res_free(fh);
-	mutex_unlock(&dev->lock);
+		videobuf_streamoff(&fh->vb_vidq);
+		res_free(fh, AU0828_RESOURCE_VIDEO);
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		videobuf_streamoff(&fh->vb_vbiq);
+		res_free(fh, AU0828_RESOURCE_VBI);
+	}
 
 	return 0;
 }
@@ -1527,19 +1748,11 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap     = vidioc_try_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap       = vidioc_s_fmt_vid_cap,
-#ifdef VBI_IS_WORKING
 	.vidioc_g_fmt_vbi_cap       = vidioc_g_fmt_vbi_cap,
-	.vidioc_try_fmt_vbi_cap     = vidioc_s_fmt_vbi_cap,
-	.vidioc_s_fmt_vbi_cap       = vidioc_s_fmt_vbi_cap,
-#endif
+	.vidioc_s_fmt_vbi_cap       = vidioc_g_fmt_vbi_cap,
 	.vidioc_g_audio             = vidioc_g_audio,
 	.vidioc_s_audio             = vidioc_s_audio,
 	.vidioc_cropcap             = vidioc_cropcap,
-#ifdef VBI_IS_WORKING
-	.vidioc_g_fmt_sliced_vbi_cap   = vidioc_g_fmt_sliced_vbi_cap,
-	.vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
-	.vidioc_s_fmt_sliced_vbi_cap   = vidioc_try_set_sliced_vbi_cap,
-#endif
 	.vidioc_reqbufs             = vidioc_reqbufs,
 	.vidioc_querybuf            = vidioc_querybuf,
 	.vidioc_qbuf                = vidioc_qbuf,
@@ -1621,8 +1834,11 @@ int au0828_analog_register(struct au0828_dev *dev,
 	spin_lock_init(&dev->slock);
 	mutex_init(&dev->lock);
 
+	/* init video dma queues */
 	INIT_LIST_HEAD(&dev->vidq.active);
 	INIT_LIST_HEAD(&dev->vidq.queued);
+	INIT_LIST_HEAD(&dev->vbiq.active);
+	INIT_LIST_HEAD(&dev->vbiq.queued);
 
 	dev->width = NTSC_STD_W;
 	dev->height = NTSC_STD_H;
@@ -1638,26 +1854,23 @@ int au0828_analog_register(struct au0828_dev *dev,
 		return -ENOMEM;
 	}
 
-#ifdef VBI_IS_WORKING
+	/* allocate the VBI struct */
 	dev->vbi_dev = video_device_alloc();
 	if (NULL == dev->vbi_dev) {
 		dprintk(1, "Can't allocate vbi_device.\n");
 		kfree(dev->vdev);
 		return -ENOMEM;
 	}
-#endif
 
 	/* Fill the video capture device struct */
 	*dev->vdev = au0828_video_template;
 	dev->vdev->parent = &dev->usbdev->dev;
 	strcpy(dev->vdev->name, "au0828a video");
 
-#ifdef VBI_IS_WORKING
 	/* Setup the VBI device */
 	*dev->vbi_dev = au0828_video_template;
 	dev->vbi_dev->parent = &dev->usbdev->dev;
 	strcpy(dev->vbi_dev->name, "au0828a vbi");
-#endif
 
 	/* Register the v4l2 device */
 	video_set_drvdata(dev->vdev, dev);
@@ -1669,7 +1882,6 @@ int au0828_analog_register(struct au0828_dev *dev,
 		return -ENODEV;
 	}
 
-#ifdef VBI_IS_WORKING
 	/* Register the vbi device */
 	video_set_drvdata(dev->vbi_dev, dev);
 	retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1);
@@ -1680,7 +1892,6 @@ int au0828_analog_register(struct au0828_dev *dev,
 		video_device_release(dev->vdev);
 		return -ENODEV;
 	}
-#endif
 
 	dprintk(1, "%s completed!\n", __func__);
 
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 207f32dec6a..9905bc4f5f5 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -60,6 +60,10 @@
 
 #define AU0828_MAX_INPUT        4
 
+/* au0828 resource types (used for res_get/res_lock etc */
+#define AU0828_RESOURCE_VIDEO 0x01
+#define AU0828_RESOURCE_VBI   0x02
+
 enum au0828_itype {
 	AU0828_VMUX_UNDEFINED = 0,
 	AU0828_VMUX_COMPOSITE,
@@ -115,8 +119,10 @@ enum au0828_dev_state {
 
 struct au0828_fh {
 	struct au0828_dev *dev;
-	unsigned int  stream_on:1;	/* Locks streams */
+	unsigned int  resources;
+
 	struct videobuf_queue        vb_vidq;
+	struct videobuf_queue        vb_vbiq;
 	enum v4l2_buf_type           type;
 };
 
@@ -145,7 +151,8 @@ struct au0828_usb_isoc_ctl {
 	int				tmp_buf_len;
 
 		/* Stores already requested buffers */
-	struct au0828_buffer    	*buf;
+	struct au0828_buffer		*buf;
+	struct au0828_buffer		*vbi_buf;
 
 		/* Stores the number of received fields */
 	int				nfields;
@@ -194,11 +201,14 @@ struct au0828_dev {
 	/* Analog */
 	struct v4l2_device v4l2_dev;
 	int users;
-	unsigned int stream_on:1;	/* Locks streams */
+	unsigned int resources;	/* resources in use */
 	struct video_device *vdev;
 	struct video_device *vbi_dev;
 	int width;
 	int height;
+	int vbi_width;
+	int vbi_height;
+	u32 vbi_read;
 	u32 field_size;
 	u32 frame_size;
 	u32 bytesperline;
@@ -219,6 +229,7 @@ struct au0828_dev {
 
 	/* Isoc control struct */
 	struct au0828_dmaqueue vidq;
+	struct au0828_dmaqueue vbiq;
 	struct au0828_usb_isoc_ctl isoc_ctl;
 	spinlock_t slock;
 
@@ -278,6 +289,9 @@ void au0828_analog_unregister(struct au0828_dev *dev);
 extern int au0828_dvb_register(struct au0828_dev *dev);
 extern void au0828_dvb_unregister(struct au0828_dev *dev);
 
+/* au0828-vbi.c */
+extern struct videobuf_queue_ops au0828_vbi_qops;
+
 #define dprintk(level, fmt, arg...)\
 	do { if (au0828_debug & level)\
 		printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index c24b1c100e1..0fa9f39f37a 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -583,7 +583,7 @@ bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf
 
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	btcx_riscmem_free(btv->c.pci,&buf->bottom);
 	btcx_riscmem_free(btv->c.pci,&buf->top);
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 3c9e754d73a..935e0c9a967 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -66,19 +66,58 @@ OTHER DEALINGS IN THE SOFTWARE.
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
-
-#include "bw-qcam.h"
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+
+/* One from column A... */
+#define QC_NOTSET 0
+#define QC_UNIDIR 1
+#define QC_BIDIR  2
+#define QC_SERIAL 3
+
+/* ... and one from column B */
+#define QC_ANY          0x00
+#define QC_FORCE_UNIDIR 0x10
+#define QC_FORCE_BIDIR  0x20
+#define QC_FORCE_SERIAL 0x30
+/* in the port_mode member */
+
+#define QC_MODE_MASK    0x07
+#define QC_FORCE_MASK   0x70
+
+#define MAX_HEIGHT 243
+#define MAX_WIDTH 336
+
+/* Bit fields for status flags */
+#define QC_PARAM_CHANGE	0x01 /* Camera status change has occurred */
+
+struct qcam {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct pardevice *pdev;
+	struct parport *pport;
+	struct mutex lock;
+	int width, height;
+	int bpp;
+	int mode;
+	int contrast, brightness, whitebal;
+	int port_mode;
+	int transfer_scale;
+	int top, left;
+	int status;
+	unsigned int saved_bits;
+	unsigned long in_use;
+};
 
 static unsigned int maxpoll = 250;   /* Maximum busy-loop count for qcam I/O */
 static unsigned int yieldlines = 4;  /* Yield after this many during capture */
@@ -93,22 +132,26 @@ module_param(video_nr, int, 0);
  * immediately attempt to initialize qcam */
 module_param(force_init, int, 0);
 
-static inline int read_lpstatus(struct qcam_device *q)
+#define MAX_CAMS 4
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline int read_lpstatus(struct qcam *q)
 {
 	return parport_read_status(q->pport);
 }
 
-static inline int read_lpdata(struct qcam_device *q)
+static inline int read_lpdata(struct qcam *q)
 {
 	return parport_read_data(q->pport);
 }
 
-static inline void write_lpdata(struct qcam_device *q, int d)
+static inline void write_lpdata(struct qcam *q, int d)
 {
 	parport_write_data(q->pport, d);
 }
 
-static inline void write_lpcontrol(struct qcam_device *q, int d)
+static void write_lpcontrol(struct qcam *q, int d)
 {
 	if (d & 0x20) {
 		/* Set bidirectional mode to reverse (data in) */
@@ -124,126 +167,11 @@ static inline void write_lpcontrol(struct qcam_device *q, int d)
 	parport_write_control(q->pport, d);
 }
 
-static int qc_waithand(struct qcam_device *q, int val);
-static int qc_command(struct qcam_device *q, int command);
-static int qc_readparam(struct qcam_device *q);
-static int qc_setscanmode(struct qcam_device *q);
-static int qc_readbytes(struct qcam_device *q, char buffer[]);
-
-static struct video_device qcam_template;
-
-static int qc_calibrate(struct qcam_device *q)
-{
-	/*
-	 *	Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
-	 *	The white balance is an individiual value for each
-	 *	quickcam.
-	 */
-
-	int value;
-	int count = 0;
-
-	qc_command(q, 27);	/* AutoAdjustOffset */
-	qc_command(q, 0);	/* Dummy Parameter, ignored by the camera */
-
-	/* GetOffset (33) will read 255 until autocalibration */
-	/* is finished. After that, a value of 1-254 will be */
-	/* returned. */
-
-	do {
-		qc_command(q, 33);
-		value = qc_readparam(q);
-		mdelay(1);
-		schedule();
-		count++;
-	} while (value == 0xff && count < 2048);
-
-	q->whitebal = value;
-	return value;
-}
-
-/* Initialize the QuickCam driver control structure.  This is where
- * defaults are set for people who don't have a config file.*/
-
-static struct qcam_device *qcam_init(struct parport *port)
-{
-	struct qcam_device *q;
-
-	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
-	if (q == NULL)
-		return NULL;
-
-	q->pport = port;
-	q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
-			NULL, 0, NULL);
-	if (q->pdev == NULL) {
-		printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
-				port->name);
-		kfree(q);
-		return NULL;
-	}
-
-	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-
-	mutex_init(&q->lock);
-
-	q->port_mode = (QC_ANY | QC_NOTSET);
-	q->width = 320;
-	q->height = 240;
-	q->bpp = 4;
-	q->transfer_scale = 2;
-	q->contrast = 192;
-	q->brightness = 180;
-	q->whitebal = 105;
-	q->top = 1;
-	q->left = 14;
-	q->mode = -1;
-	q->status = QC_PARAM_CHANGE;
-	return q;
-}
-
-
-/* qc_command is probably a bit of a misnomer -- it's used to send
- * bytes *to* the camera.  Generally, these bytes are either commands
- * or arguments to commands, so the name fits, but it still bugs me a
- * bit.  See the documentation for a list of commands. */
-
-static int qc_command(struct qcam_device *q, int command)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpdata(q, command);
-	write_lpcontrol(q, 6);
-
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
-
-static int qc_readparam(struct qcam_device *q)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpcontrol(q, 6);
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
 
 /* qc_waithand busy-waits for a handshake signal from the QuickCam.
  * Almost all communication with the camera requires handshaking. */
 
-static int qc_waithand(struct qcam_device *q, int val)
+static int qc_waithand(struct qcam *q, int val)
 {
 	int status;
 	int runs = 0;
@@ -286,7 +214,7 @@ static int qc_waithand(struct qcam_device *q, int val)
  * (bit 3 of status register).  It also returns the last value read,
  * since this data is useful. */
 
-static unsigned int qc_waithand2(struct qcam_device *q, int val)
+static unsigned int qc_waithand2(struct qcam *q, int val)
 {
 	unsigned int status;
 	int runs = 0;
@@ -309,6 +237,43 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val)
 	return status;
 }
 
+/* qc_command is probably a bit of a misnomer -- it's used to send
+ * bytes *to* the camera.  Generally, these bytes are either commands
+ * or arguments to commands, so the name fits, but it still bugs me a
+ * bit.  See the documentation for a list of commands. */
+
+static int qc_command(struct qcam *q, int command)
+{
+	int n1, n2;
+	int cmd;
+
+	write_lpdata(q, command);
+	write_lpcontrol(q, 6);
+
+	n1 = qc_waithand(q, 1);
+
+	write_lpcontrol(q, 0xe);
+	n2 = qc_waithand(q, 0);
+
+	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+	return cmd;
+}
+
+static int qc_readparam(struct qcam *q)
+{
+	int n1, n2;
+	int cmd;
+
+	write_lpcontrol(q, 6);
+	n1 = qc_waithand(q, 1);
+
+	write_lpcontrol(q, 0xe);
+	n2 = qc_waithand(q, 0);
+
+	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+	return cmd;
+}
+
 
 /* Try to detect a QuickCam.  It appears to flash the upper 4 bits of
    the status register at 5-10 Hz.  This is only used in the autoprobe
@@ -317,7 +282,7 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val)
    almost completely safe, while their method screws up my printer if
    I plug it in before the camera. */
 
-static int qc_detect(struct qcam_device *q)
+static int qc_detect(struct qcam *q)
 {
 	int reg, lastreg;
 	int count = 0;
@@ -358,41 +323,6 @@ static int qc_detect(struct qcam_device *q)
 	}
 }
 
-
-/* Reset the QuickCam.  This uses the same sequence the Windows
- * QuickPic program uses.  Someone with a bi-directional port should
- * check that bi-directional mode is detected right, and then
- * implement bi-directional mode in qc_readbyte(). */
-
-static void qc_reset(struct qcam_device *q)
-{
-	switch (q->port_mode & QC_FORCE_MASK) {
-	case QC_FORCE_UNIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-
-	case QC_FORCE_BIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		break;
-
-	case QC_ANY:
-		write_lpcontrol(q, 0x20);
-		write_lpdata(q, 0x75);
-
-		if (read_lpdata(q) != 0x75)
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		else
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-	}
-
-	write_lpcontrol(q, 0xb);
-	udelay(250);
-	write_lpcontrol(q, 0xe);
-	qc_setscanmode(q);		/* in case port_mode changed */
-}
-
-
 /* Decide which scan mode to use.  There's no real requirement that
  * the scanmode match the resolution in q->height and q-> width -- the
  * camera takes the picture at the resolution specified in the
@@ -402,7 +332,7 @@ static void qc_reset(struct qcam_device *q)
  * returned.  If the scan is smaller, then the rest of the image
  * returned contains garbage. */
 
-static int qc_setscanmode(struct qcam_device *q)
+static int qc_setscanmode(struct qcam *q)
 {
 	int old_mode = q->mode;
 
@@ -442,10 +372,45 @@ static int qc_setscanmode(struct qcam_device *q)
 }
 
 
+/* Reset the QuickCam.  This uses the same sequence the Windows
+ * QuickPic program uses.  Someone with a bi-directional port should
+ * check that bi-directional mode is detected right, and then
+ * implement bi-directional mode in qc_readbyte(). */
+
+static void qc_reset(struct qcam *q)
+{
+	switch (q->port_mode & QC_FORCE_MASK) {
+	case QC_FORCE_UNIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
+
+	case QC_FORCE_BIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		break;
+
+	case QC_ANY:
+		write_lpcontrol(q, 0x20);
+		write_lpdata(q, 0x75);
+
+		if (read_lpdata(q) != 0x75)
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		else
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
+	}
+
+	write_lpcontrol(q, 0xb);
+	udelay(250);
+	write_lpcontrol(q, 0xe);
+	qc_setscanmode(q);		/* in case port_mode changed */
+}
+
+
+
 /* Reset the QuickCam and program for brightness, contrast,
  * white-balance, and resolution. */
 
-static void qc_set(struct qcam_device *q)
+static void qc_set(struct qcam *q)
 {
 	int val;
 	int val2;
@@ -499,7 +464,7 @@ static void qc_set(struct qcam_device *q)
    the supplied buffer.  It returns the number of bytes read,
    or -1 on error. */
 
-static inline int qc_readbytes(struct qcam_device *q, char buffer[])
+static inline int qc_readbytes(struct qcam *q, char buffer[])
 {
 	int ret = 1;
 	unsigned int hi, lo;
@@ -590,7 +555,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
  * n=2^(bit depth)-1.  Ask me for more details if you don't understand
  * this. */
 
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *q, char __user *buf, unsigned long len)
 {
 	int i, j, k, yield;
 	int bytes;
@@ -674,171 +639,206 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
  *	Video4linux interfacing
  */
 
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *vcap)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-		{
-			struct video_capability *b = arg;
-			strcpy(b->name, "Quickcam");
-			b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES|VID_TYPE_MONOCHROME;
-			b->channels = 1;
-			b->audios = 0;
-			b->maxwidth = 320;
-			b->maxheight = 240;
-			b->minwidth = 80;
-			b->minheight = 60;
-			return 0;
-		}
-	case VIDIOCGCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			v->flags = 0;
-			v->tuners = 0;
-			/* Good question.. its composite or SVHS so.. */
-			v->type = VIDEO_TYPE_CAMERA;
-			strcpy(v->name, "Camera");
-			return 0;
-		}
-	case VIDIOCSCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCGTUNER:
-		{
-			struct video_tuner *v = arg;
-			if (v->tuner)
-				return -EINVAL;
-			strcpy(v->name, "Format");
-			v->rangelow = 0;
-			v->rangehigh = 0;
-			v->flags = 0;
-			v->mode = VIDEO_MODE_AUTO;
-			return 0;
-		}
-	case VIDIOCSTUNER:
-		{
-			struct video_tuner *v = arg;
-			if (v->tuner)
-				return -EINVAL;
-			if (v->mode != VIDEO_MODE_AUTO)
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCGPICT:
-		{
-			struct video_picture *p = arg;
-			p->colour = 0x8000;
-			p->hue = 0x8000;
-			p->brightness = qcam->brightness << 8;
-			p->contrast = qcam->contrast << 8;
-			p->whiteness = qcam->whitebal << 8;
-			p->depth = qcam->bpp;
-			p->palette = VIDEO_PALETTE_GREY;
-			return 0;
-		}
-	case VIDIOCSPICT:
-		{
-			struct video_picture *p = arg;
-			if (p->palette != VIDEO_PALETTE_GREY)
-				return -EINVAL;
-			if (p->depth != 4 && p->depth != 6)
-				return -EINVAL;
-
-			/*
-			 *	Now load the camera.
-			 */
-
-			qcam->brightness = p->brightness >> 8;
-			qcam->contrast = p->contrast >> 8;
-			qcam->whitebal = p->whiteness >> 8;
-			qcam->bpp = p->depth;
-
-			mutex_lock(&qcam->lock);
-			qc_setscanmode(qcam);
-			mutex_unlock(&qcam->lock);
-			qcam->status |= QC_PARAM_CHANGE;
+	struct qcam *qcam = video_drvdata(file);
 
-			return 0;
-		}
-	case VIDIOCSWIN:
-		{
-			struct video_window *vw = arg;
-			if (vw->flags)
-				return -EINVAL;
-			if (vw->clipcount)
-				return -EINVAL;
-			if (vw->height < 60 || vw->height > 240)
-				return -EINVAL;
-			if (vw->width < 80 || vw->width > 320)
-				return -EINVAL;
-
-			qcam->width = 320;
-			qcam->height = 240;
-			qcam->transfer_scale = 4;
-
-			if (vw->width >= 160 && vw->height >= 120)
-				qcam->transfer_scale = 2;
-			if (vw->width >= 320 && vw->height >= 240) {
-				qcam->width = 320;
-				qcam->height = 240;
-				qcam->transfer_scale = 1;
-			}
-			mutex_lock(&qcam->lock);
-			qc_setscanmode(qcam);
-			mutex_unlock(&qcam->lock);
+	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	vcap->version = KERNEL_VERSION(0, 0, 2);
+	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
+	return 0;
+}
 
-			/* We must update the camera before we grab. We could
-			   just have changed the grab size */
-			qcam->status |= QC_PARAM_CHANGE;
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
+{
+	if (vin->index > 0)
+		return -EINVAL;
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+	return 0;
+}
 
-			/* Ok we figured out what to use from our wide choice */
-			return 0;
-		}
-	case VIDIOCGWIN:
-		{
-			struct video_window *vw = arg;
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+	return 0;
+}
 
-			memset(vw, 0, sizeof(*vw));
-			vw->width = qcam->width / qcam->transfer_scale;
-			vw->height = qcam->height / qcam->transfer_scale;
-			return 0;
-		}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+					struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 180);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+	case V4L2_CID_GAMMA:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 105);
+	}
+	return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = qcam->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = qcam->contrast;
+		break;
+	case V4L2_CID_GAMMA:
+		ctrl->value = qcam->whitebal;
+		break;
 	default:
-		return -ENOIOCTLCMD;
+		ret = -EINVAL;
+		break;
 	}
+	return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	mutex_lock(&qcam->lock);
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		qcam->brightness = ctrl->value;
+		break;
+	case V4L2_CID_CONTRAST:
+		qcam->contrast = ctrl->value;
+		break;
+	case V4L2_CID_GAMMA:
+		qcam->whitebal = ctrl->value;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	if (ret == 0) {
+		qc_setscanmode(qcam);
+		qcam->status |= QC_PARAM_CHANGE;
+	}
+	mutex_unlock(&qcam->lock);
+	return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	pix->width = qcam->width / qcam->transfer_scale;
+	pix->height = qcam->height / qcam->transfer_scale;
+	pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = qcam->width;
+	pix->sizeimage = qcam->width * qcam->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->height <= 60 || pix->width <= 80) {
+		pix->height = 60;
+		pix->width = 80;
+	} else if (pix->height <= 120 || pix->width <= 160) {
+		pix->height = 120;
+		pix->width = 160;
+	} else {
+		pix->height = 240;
+		pix->width = 320;
+	}
+	if (pix->pixelformat != V4L2_PIX_FMT_Y4 &&
+	    pix->pixelformat != V4L2_PIX_FMT_Y6)
+		pix->pixelformat = V4L2_PIX_FMT_Y4;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = pix->width;
+	pix->sizeimage = pix->width * pix->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	qcam->width = 320;
+	qcam->height = 240;
+	if (pix->height == 60)
+		qcam->transfer_scale = 4;
+	else if (pix->height == 120)
+		qcam->transfer_scale = 2;
+	else
+		qcam->transfer_scale = 1;
+	if (pix->pixelformat == V4L2_PIX_FMT_Y6)
+		qcam->bpp = 6;
+	else
+		qcam->bpp = 4;
+
+	mutex_lock(&qcam->lock);
+	qc_setscanmode(qcam);
+	/* We must update the camera before we grab. We could
+	   just have changed the grab size */
+	qcam->status |= QC_PARAM_CHANGE;
+	mutex_unlock(&qcam->lock);
 	return 0;
 }
 
-static long qcam_ioctl(struct file *file,
-		unsigned int cmd, unsigned long arg)
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
 {
-	return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+	static struct v4l2_fmtdesc formats[] = {
+		{ 0, 0, 0,
+		  "4-Bit Monochrome", V4L2_PIX_FMT_Y4,
+		  { 0, 0, 0, 0 }
+		},
+		{ 0, 0, 0,
+		  "6-Bit Monochrome", V4L2_PIX_FMT_Y6,
+		  { 0, 0, 0, 0 }
+		},
+	};
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 1)
+		return -EINVAL;
+
+	*fmt = formats[fmt->index];
+	fmt->type = type;
+	return 0;
 }
 
 static ssize_t qcam_read(struct file *file, char __user *buf,
 		size_t count, loff_t *ppos)
 {
-	struct video_device *v = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)v;
+	struct qcam *qcam = video_drvdata(file);
 	int len;
 	parport_claim_or_block(qcam->pdev);
 
@@ -858,43 +858,112 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	return len;
 }
 
-static int qcam_exclusive_open(struct file *file)
+static const struct v4l2_file_operations qcam_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl          = video_ioctl2,
+	.read		= qcam_read,
+};
+
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+	.vidioc_querycap    		    = qcam_querycap,
+	.vidioc_g_input      		    = qcam_g_input,
+	.vidioc_s_input      		    = qcam_s_input,
+	.vidioc_enum_input   		    = qcam_enum_input,
+	.vidioc_queryctrl 		    = qcam_queryctrl,
+	.vidioc_g_ctrl  		    = qcam_g_ctrl,
+	.vidioc_s_ctrl 			    = qcam_s_ctrl,
+	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
+};
+
+/* Initialize the QuickCam driver control structure.  This is where
+ * defaults are set for people who don't have a config file.*/
+
+static struct qcam *qcam_init(struct parport *port)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
+
+	qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL);
+	if (qcam == NULL)
+		return NULL;
+
+	v4l2_dev = &qcam->v4l2_dev;
+	strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
 
-	return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
+	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		return NULL;
+	}
+
+	qcam->pport = port;
+	qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+			NULL, 0, NULL);
+	if (qcam->pdev == NULL) {
+		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+		kfree(qcam);
+		return NULL;
+	}
+
+	strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name));
+	qcam->vdev.v4l2_dev = v4l2_dev;
+	qcam->vdev.fops = &qcam_fops;
+	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+	qcam->vdev.release = video_device_release_empty;
+	video_set_drvdata(&qcam->vdev, qcam);
+
+	mutex_init(&qcam->lock);
+
+	qcam->port_mode = (QC_ANY | QC_NOTSET);
+	qcam->width = 320;
+	qcam->height = 240;
+	qcam->bpp = 4;
+	qcam->transfer_scale = 2;
+	qcam->contrast = 192;
+	qcam->brightness = 180;
+	qcam->whitebal = 105;
+	qcam->top = 1;
+	qcam->left = 14;
+	qcam->mode = -1;
+	qcam->status = QC_PARAM_CHANGE;
+	return qcam;
 }
 
-static int qcam_exclusive_release(struct file *file)
+static int qc_calibrate(struct qcam *q)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
+	/*
+	 *	Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
+	 *	The white balance is an individual value for each
+	 *	quickcam.
+	 */
 
-	clear_bit(0, &qcam->in_use);
-	return 0;
-}
+	int value;
+	int count = 0;
 
-static const struct v4l2_file_operations qcam_fops = {
-	.owner		= THIS_MODULE,
-	.open           = qcam_exclusive_open,
-	.release        = qcam_exclusive_release,
-	.ioctl          = qcam_ioctl,
-	.read		= qcam_read,
-};
-static struct video_device qcam_template = {
-	.name		= "Connectix Quickcam",
-	.fops           = &qcam_fops,
-	.release 	= video_device_release_empty,
-};
+	qc_command(q, 27);	/* AutoAdjustOffset */
+	qc_command(q, 0);	/* Dummy Parameter, ignored by the camera */
 
-#define MAX_CAMS 4
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
+	/* GetOffset (33) will read 255 until autocalibration */
+	/* is finished. After that, a value of 1-254 will be */
+	/* returned. */
+
+	do {
+		qc_command(q, 33);
+		value = qc_readparam(q);
+		mdelay(1);
+		schedule();
+		count++;
+	} while (value == 0xff && count < 2048);
+
+	q->whitebal = value;
+	return value;
+}
 
 static int init_bwqcam(struct parport *port)
 {
-	struct qcam_device *qcam;
+	struct qcam *qcam;
 
 	if (num_cams == MAX_CAMS) {
 		printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS);
@@ -919,7 +988,7 @@ static int init_bwqcam(struct parport *port)
 
 	parport_release(qcam->pdev);
 
-	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
+	v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name);
 
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		parport_unregister_device(qcam->pdev);
@@ -932,7 +1001,7 @@ static int init_bwqcam(struct parport *port)
 	return 0;
 }
 
-static void close_bwqcam(struct qcam_device *qcam)
+static void close_bwqcam(struct qcam *qcam)
 {
 	video_unregister_device(&qcam->vdev);
 	parport_unregister_device(qcam->pdev);
@@ -983,7 +1052,7 @@ static void bwqcam_detach(struct parport *port)
 {
 	int i;
 	for (i = 0; i < num_cams; i++) {
-		struct qcam_device *qcam = qcams[i];
+		struct qcam *qcam = qcams[i];
 		if (qcam && qcam->pdev->port == port) {
 			qcams[i] = NULL;
 			close_bwqcam(qcam);
diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h
deleted file mode 100644
index 8a60c5de093..00000000000
--- a/drivers/media/video/bw-qcam.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *	Video4Linux bw-qcam driver
- *
- *	Derived from code..
- */
-
-/******************************************************************
-
-Copyright (C) 1996 by Scott Laird
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-******************************************************************/
-
-/* One from column A... */
-#define QC_NOTSET 0
-#define QC_UNIDIR 1
-#define QC_BIDIR  2
-#define QC_SERIAL 3
-
-/* ... and one from column B */
-#define QC_ANY          0x00
-#define QC_FORCE_UNIDIR 0x10
-#define QC_FORCE_BIDIR  0x20
-#define QC_FORCE_SERIAL 0x30
-/* in the port_mode member */
-
-#define QC_MODE_MASK    0x07
-#define QC_FORCE_MASK   0x70
-
-#define MAX_HEIGHT 243
-#define MAX_WIDTH 336
-
-/* Bit fields for status flags */
-#define QC_PARAM_CHANGE	0x01 /* Camera status change has occurred */
-
-struct qcam_device {
-	struct video_device vdev;
-	struct pardevice *pdev;
-	struct parport *pport;
-	struct mutex lock;
-	int width, height;
-	int bpp;
-	int mode;
-	int contrast, brightness, whitebal;
-	int port_mode;
-	int transfer_scale;
-	int top, left;
-	int status;
-	unsigned int saved_bits;
-	unsigned long in_use;
-};
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 8f1dd88b32a..6e4b19698c1 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -33,15 +33,17 @@
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
-
+#include <linux/version.h>
+#include <linux/videodev2.h>
 #include <asm/uaccess.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
-struct qcam_device {
+struct qcam {
+	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
 	struct pardevice *pdev;
 	struct parport *pport;
@@ -51,7 +53,6 @@ struct qcam_device {
 	int contrast, brightness, whitebal;
 	int top, left;
 	unsigned int bidirectional;
-	unsigned long in_use;
 	struct mutex lock;
 };
 
@@ -68,33 +69,45 @@ struct qcam_device {
 #define QC_DECIMATION_2		2
 #define QC_DECIMATION_4		4
 
-#define BANNER "Colour QuickCam for Video4Linux v0.05"
+#define BANNER "Colour QuickCam for Video4Linux v0.06"
 
 static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
 static int probe = 2;
 static int force_rgb;
 static int video_nr = -1;
 
-static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i)
+/* FIXME: parport=auto would never have worked, surely? --RR */
+MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
+			  "probe=<0|1|2> for camera detection method\n"
+			  "force_rgb=<0|1> for RGB data format (default BGR)");
+module_param_array(parport, int, NULL, 0);
+module_param(probe, int, 0);
+module_param(force_rgb, bool, 0);
+module_param(video_nr, int, 0);
+
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline void qcam_set_ack(struct qcam *qcam, unsigned int i)
 {
 	/* note: the QC specs refer to the PCAck pin by voltage, not
 	   software level.  PC ports have builtin inverters. */
 	parport_frob_control(qcam->pport, 8, i ? 8 : 0);
 }
 
-static inline unsigned int qcam_ready1(struct qcam_device *qcam)
+static inline unsigned int qcam_ready1(struct qcam *qcam)
 {
 	return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0;
 }
 
-static inline unsigned int qcam_ready2(struct qcam_device *qcam)
+static inline unsigned int qcam_ready2(struct qcam *qcam)
 {
 	return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0;
 }
 
-static unsigned int qcam_await_ready1(struct qcam_device *qcam,
-					     int value)
+static unsigned int qcam_await_ready1(struct qcam *qcam, int value)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned long oldjiffies = jiffies;
 	unsigned int i;
 
@@ -112,14 +125,15 @@ static unsigned int qcam_await_ready1(struct qcam_device *qcam,
 	}
 
 	/* Probably somebody pulled the plug out.  Not much we can do. */
-	printk(KERN_ERR "c-qcam: ready1 timeout (%d) %x %x\n", value,
+	v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value,
 	       parport_read_status(qcam->pport),
 	       parport_read_control(qcam->pport));
 	return 1;
 }
 
-static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
+static unsigned int qcam_await_ready2(struct qcam *qcam, int value)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned long oldjiffies = jiffies;
 	unsigned int i;
 
@@ -137,14 +151,14 @@ static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
 	}
 
 	/* Probably somebody pulled the plug out.  Not much we can do. */
-	printk(KERN_ERR "c-qcam: ready2 timeout (%d) %x %x %x\n", value,
+	v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value,
 	       parport_read_status(qcam->pport),
 	       parport_read_control(qcam->pport),
 	       parport_read_data(qcam->pport));
 	return 1;
 }
 
-static int qcam_read_data(struct qcam_device *qcam)
+static int qcam_read_data(struct qcam *qcam)
 {
 	unsigned int idata;
 
@@ -159,21 +173,22 @@ static int qcam_read_data(struct qcam_device *qcam)
 	return idata;
 }
 
-static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
+static int qcam_write_data(struct qcam *qcam, unsigned int data)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned int idata;
 
 	parport_write_data(qcam->pport, data);
 	idata = qcam_read_data(qcam);
 	if (data != idata) {
-		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
+		v4l2_warn(v4l2_dev, "sent %x but received %x\n", data,
 		       idata);
 		return 1;
 	}
 	return 0;
 }
 
-static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned int data)
+static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data)
 {
 	if (qcam_write_data(qcam, cmd))
 		return -1;
@@ -182,14 +197,14 @@ static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned
 	return 0;
 }
 
-static inline int qcam_get(struct qcam_device *qcam, unsigned int cmd)
+static inline int qcam_get(struct qcam *qcam, unsigned int cmd)
 {
 	if (qcam_write_data(qcam, cmd))
 		return -1;
 	return qcam_read_data(qcam);
 }
 
-static int qc_detect(struct qcam_device *qcam)
+static int qc_detect(struct qcam *qcam)
 {
 	unsigned int stat, ostat, i, count = 0;
 
@@ -246,7 +261,7 @@ static int qc_detect(struct qcam_device *qcam)
 	return 0;
 }
 
-static void qc_reset(struct qcam_device *qcam)
+static void qc_reset(struct qcam *qcam)
 {
 	parport_write_control(qcam->pport, 0xc);
 	parport_write_control(qcam->pport, 0x8);
@@ -258,55 +273,55 @@ static void qc_reset(struct qcam_device *qcam)
 /* Reset the QuickCam and program for brightness, contrast,
  * white-balance, and resolution. */
 
-static void qc_setup(struct qcam_device *q)
+static void qc_setup(struct qcam *qcam)
 {
-	qc_reset(q);
+	qc_reset(qcam);
 
 	/* Set the brightness. */
-	qcam_set(q, 11, q->brightness);
+	qcam_set(qcam, 11, qcam->brightness);
 
 	/* Set the height and width.  These refer to the actual
 	   CCD area *before* applying the selected decimation.  */
-	qcam_set(q, 17, q->ccd_height);
-	qcam_set(q, 19, q->ccd_width / 2);
+	qcam_set(qcam, 17, qcam->ccd_height);
+	qcam_set(qcam, 19, qcam->ccd_width / 2);
 
 	/* Set top and left.  */
-	qcam_set(q, 0xd, q->top);
-	qcam_set(q, 0xf, q->left);
+	qcam_set(qcam, 0xd, qcam->top);
+	qcam_set(qcam, 0xf, qcam->left);
 
 	/* Set contrast and white balance.  */
-	qcam_set(q, 0x19, q->contrast);
-	qcam_set(q, 0x1f, q->whitebal);
+	qcam_set(qcam, 0x19, qcam->contrast);
+	qcam_set(qcam, 0x1f, qcam->whitebal);
 
 	/* Set the speed.  */
-	qcam_set(q, 45, 2);
+	qcam_set(qcam, 45, 2);
 }
 
 /* Read some bytes from the camera and put them in the buffer.
    nbytes should be a multiple of 3, because bidirectional mode gives
    us three bytes at a time.  */
 
-static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, unsigned int nbytes)
+static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes)
 {
 	unsigned int bytes = 0;
 
-	qcam_set_ack(q, 0);
-	if (q->bidirectional) {
+	qcam_set_ack(qcam, 0);
+	if (qcam->bidirectional) {
 		/* It's a bidirectional port */
 		while (bytes < nbytes) {
 			unsigned int lo1, hi1, lo2, hi2;
 			unsigned char r, g, b;
 
-			if (qcam_await_ready2(q, 1))
+			if (qcam_await_ready2(qcam, 1))
 				return bytes;
-			lo1 = parport_read_data(q->pport) >> 1;
-			hi1 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
-			qcam_set_ack(q, 1);
-			if (qcam_await_ready2(q, 0))
+			lo1 = parport_read_data(qcam->pport) >> 1;
+			hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready2(qcam, 0))
 				return bytes;
-			lo2 = parport_read_data(q->pport) >> 1;
-			hi2 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
-			qcam_set_ack(q, 0);
+			lo2 = parport_read_data(qcam->pport) >> 1;
+			hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 0);
 			r = lo1 | ((hi1 & 1) << 7);
 			g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1);
 			b = lo2 | ((hi2 & 1) << 7);
@@ -328,14 +343,14 @@ static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, u
 		while (bytes < nbytes) {
 			unsigned int hi, lo;
 
-			if (qcam_await_ready1(q, 1))
+			if (qcam_await_ready1(qcam, 1))
 				return bytes;
-			hi = (parport_read_status(q->pport) & 0xf0);
-			qcam_set_ack(q, 1);
-			if (qcam_await_ready1(q, 0))
+			hi = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready1(qcam, 0))
 				return bytes;
-			lo = (parport_read_status(q->pport) & 0xf0);
-			qcam_set_ack(q, 0);
+			lo = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 0);
 			/* flip some bits */
 			rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
 			if (i >= 2) {
@@ -361,10 +376,11 @@ get_fragment:
 
 #define BUFSZ	150
 
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned lines, pixelsperline, bitsperxfer;
-	unsigned int is_bi_dir = q->bidirectional;
+	unsigned int is_bi_dir = qcam->bidirectional;
 	size_t wantlen, outptr = 0;
 	char tmpbuf[BUFSZ];
 
@@ -373,10 +389,10 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 
 	/* Wait for camera to become ready */
 	for (;;) {
-		int i = qcam_get(q, 41);
+		int i = qcam_get(qcam, 41);
 
 		if (i == -1) {
-			qc_setup(q);
+			qc_setup(qcam);
 			return -EIO;
 		}
 		if ((i & 0x80) == 0)
@@ -384,25 +400,25 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 		schedule();
 	}
 
-	if (qcam_set(q, 7, (q->mode | (is_bi_dir ? 1 : 0)) + 1))
+	if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1))
 		return -EIO;
 
-	lines = q->height;
-	pixelsperline = q->width;
+	lines = qcam->height;
+	pixelsperline = qcam->width;
 	bitsperxfer = (is_bi_dir) ? 24 : 8;
 
 	if (is_bi_dir) {
 		/* Turn the port around */
-		parport_data_reverse(q->pport);
+		parport_data_reverse(qcam->pport);
 		mdelay(3);
-		qcam_set_ack(q, 0);
-		if (qcam_await_ready1(q, 1)) {
-			qc_setup(q);
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			qc_setup(qcam);
 			return -EIO;
 		}
-		qcam_set_ack(q, 1);
-		if (qcam_await_ready1(q, 0)) {
-			qc_setup(q);
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			qc_setup(qcam);
 			return -EIO;
 		}
 	}
@@ -413,7 +429,7 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 		size_t t, s;
 
 		s = (wantlen > BUFSZ) ? BUFSZ : wantlen;
-		t = qcam_read_bytes(q, tmpbuf, s);
+		t = qcam_read_bytes(qcam, tmpbuf, s);
 		if (outptr < len) {
 			size_t sz = len - outptr;
 
@@ -432,10 +448,10 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 	len = outptr;
 
 	if (wantlen) {
-		printk(KERN_ERR "qcam: short read.\n");
+		v4l2_err(v4l2_dev, "short read.\n");
 		if (is_bi_dir)
-			parport_data_forward(q->pport);
-		qc_setup(q);
+			parport_data_forward(qcam->pport);
+		qc_setup(qcam);
 		return len;
 	}
 
@@ -443,49 +459,49 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 		int l;
 
 		do {
-			l = qcam_read_bytes(q, tmpbuf, 3);
+			l = qcam_read_bytes(qcam, tmpbuf, 3);
 			cond_resched();
 		} while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
 		if (force_rgb) {
 			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		} else {
 			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		}
-		qcam_set_ack(q, 0);
-		if (qcam_await_ready1(q, 1)) {
-			printk(KERN_ERR "qcam: no ack after EOF\n");
-			parport_data_forward(q->pport);
-			qc_setup(q);
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			v4l2_err(v4l2_dev, "no ack after EOF\n");
+			parport_data_forward(qcam->pport);
+			qc_setup(qcam);
 			return len;
 		}
-		parport_data_forward(q->pport);
+		parport_data_forward(qcam->pport);
 		mdelay(3);
-		qcam_set_ack(q, 1);
-		if (qcam_await_ready1(q, 0)) {
-			printk(KERN_ERR "qcam: no ack to port turnaround\n");
-			qc_setup(q);
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			v4l2_err(v4l2_dev, "no ack to port turnaround\n");
+			qc_setup(qcam);
 			return len;
 		}
 	} else {
 		int l;
 
 		do {
-			l = qcam_read_bytes(q, tmpbuf, 1);
+			l = qcam_read_bytes(qcam, tmpbuf, 1);
 			cond_resched();
 		} while (l && tmpbuf[0] == 0x7e);
-		l = qcam_read_bytes(q, tmpbuf + 1, 2);
+		l = qcam_read_bytes(qcam, tmpbuf + 1, 2);
 		if (force_rgb) {
 			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		} else {
 			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		}
 	}
 
-	qcam_write_data(q, 0);
+	qcam_write_data(qcam, 0);
 	return len;
 }
 
@@ -493,184 +509,202 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
  *	Video4linux interfacing
  */
 
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *vcap)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
+	struct qcam *qcam = video_drvdata(file);
 
-	switch (cmd) {
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
+	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	vcap->version = KERNEL_VERSION(0, 0, 3);
+	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
+	return 0;
+}
 
-		strcpy(b->name, "Quickcam");
-		b->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = 320;
-		b->maxheight = 240;
-		b->minwidth = 80;
-		b->minheight = 60;
-		return 0;
-	}
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		v->flags = 0;
-		v->tuners = 0;
-		/* Good question.. its composite or SVHS so.. */
-		v->type = VIDEO_TYPE_CAMERA;
-		strcpy(v->name, "Camera");
-		return 0;
-	}
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
+{
+	if (vin->index > 0)
+		return -EINVAL;
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+	return 0;
+}
 
-		if (v->channel != 0)
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGTUNER:
-	{
-		struct video_tuner *v = arg;
-
-		if (v->tuner)
-			return -EINVAL;
-		memset(v, 0, sizeof(*v));
-		strcpy(v->name, "Format");
-		v->mode = VIDEO_MODE_AUTO;
-		return 0;
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+	return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+					struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 240);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+	case V4L2_CID_GAMMA:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
 	}
-	case VIDIOCSTUNER:
-	{
-		struct video_tuner *v = arg;
-
-		if (v->tuner)
-			return -EINVAL;
-		if (v->mode != VIDEO_MODE_AUTO)
-			return -EINVAL;
-		return 0;
+	return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = qcam->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = qcam->contrast;
+		break;
+	case V4L2_CID_GAMMA:
+		ctrl->value = qcam->whitebal;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
 	}
-	case VIDIOCGPICT:
-	{
-		struct video_picture *p = arg;
-
-		p->colour = 0x8000;
-		p->hue = 0x8000;
-		p->brightness = qcam->brightness << 8;
-		p->contrast = qcam->contrast << 8;
-		p->whiteness = qcam->whitebal << 8;
-		p->depth = 24;
-		p->palette = VIDEO_PALETTE_RGB24;
-		return 0;
+	return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	mutex_lock(&qcam->lock);
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		qcam->brightness = ctrl->value;
+		break;
+	case V4L2_CID_CONTRAST:
+		qcam->contrast = ctrl->value;
+		break;
+	case V4L2_CID_GAMMA:
+		qcam->whitebal = ctrl->value;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
 	}
-	case VIDIOCSPICT:
-	{
-		struct video_picture *p = arg;
-
-		/*
-		 *	Sanity check args
-		 */
-		if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
-			return -EINVAL;
-
-		/*
-		 *	Now load the camera.
-		 */
-		qcam->brightness = p->brightness >> 8;
-		qcam->contrast = p->contrast >> 8;
-		qcam->whitebal = p->whiteness >> 8;
-
-		mutex_lock(&qcam->lock);
+	if (ret == 0) {
 		parport_claim_or_block(qcam->pdev);
 		qc_setup(qcam);
 		parport_release(qcam->pdev);
-		mutex_unlock(&qcam->lock);
-		return 0;
 	}
-	case VIDIOCSWIN:
-	{
-		struct video_window *vw = arg;
-
-		if (vw->flags)
-			return -EINVAL;
-		if (vw->clipcount)
-			return -EINVAL;
-		if (vw->height < 60 || vw->height > 240)
-			return -EINVAL;
-		if (vw->width < 80 || vw->width > 320)
-			return -EINVAL;
-
-		qcam->width = 80;
-		qcam->height = 60;
-		qcam->mode = QC_DECIMATION_4;
+	mutex_unlock(&qcam->lock);
+	return ret;
+}
 
-		if (vw->width >= 160 && vw->height >= 120) {
-			qcam->width = 160;
-			qcam->height = 120;
-			qcam->mode = QC_DECIMATION_2;
-		}
-		if (vw->width >= 320 && vw->height >= 240) {
-			qcam->width = 320;
-			qcam->height = 240;
-			qcam->mode = QC_DECIMATION_1;
-		}
-		qcam->mode |= QC_MILLIONS;
-#if 0
-		if (vw->width >= 640 && vw->height >= 480) {
-			qcam->width = 640;
-			qcam->height = 480;
-			qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
-		}
-#endif
-		/* Ok we figured out what to use from our
-		   wide choice */
-		mutex_lock(&qcam->lock);
-		parport_claim_or_block(qcam->pdev);
-		qc_setup(qcam);
-		parport_release(qcam->pdev);
-		mutex_unlock(&qcam->lock);
-		return 0;
-	}
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-		memset(vw, 0, sizeof(*vw));
-		vw->width = qcam->width;
-		vw->height = qcam->height;
-		return 0;
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	pix->width = qcam->width;
+	pix->height = qcam->height;
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * qcam->width;
+	pix->sizeimage = 3 * qcam->width * qcam->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->height < 60 || pix->width < 80) {
+		pix->height = 60;
+		pix->width = 80;
+	} else if (pix->height < 120 || pix->width < 160) {
+		pix->height = 120;
+		pix->width = 160;
+	} else {
+		pix->height = 240;
+		pix->width = 320;
 	}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * pix->width;
+	pix->sizeimage = 3 * pix->width * pix->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	switch (pix->height) {
+	case 60:
+		qcam->mode = QC_DECIMATION_4;
+		break;
+	case 120:
+		qcam->mode = QC_DECIMATION_2;
+		break;
 	default:
-		return -ENOIOCTLCMD;
+		qcam->mode = QC_DECIMATION_1;
+		break;
 	}
+
+	mutex_lock(&qcam->lock);
+	qcam->mode |= QC_MILLIONS;
+	qcam->height = pix->height;
+	qcam->width = pix->width;
+	parport_claim_or_block(qcam->pdev);
+	qc_setup(qcam);
+	parport_release(qcam->pdev);
+	mutex_unlock(&qcam->lock);
 	return 0;
 }
 
-static long qcam_ioctl(struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
 {
-	return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+	static struct v4l2_fmtdesc formats[] = {
+		{ 0, 0, 0,
+		  "RGB 8:8:8", V4L2_PIX_FMT_RGB24,
+		  { 0, 0, 0, 0 }
+		},
+	};
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	*fmt = formats[fmt->index];
+	fmt->type = type;
+	return 0;
 }
 
 static ssize_t qcam_read(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
-	struct video_device *v = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)v;
+	struct qcam *qcam = video_drvdata(file);
 	int len;
 
 	mutex_lock(&qcam->lock);
@@ -682,81 +716,80 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	return len;
 }
 
-static int qcam_exclusive_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
-}
-
-static int qcam_exclusive_release(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	clear_bit(0, &qcam->in_use);
-	return 0;
-}
-
-/* video device template */
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.open           = qcam_exclusive_open,
-	.release        = qcam_exclusive_release,
-	.ioctl          = qcam_ioctl,
+	.ioctl		= video_ioctl2,
 	.read		= qcam_read,
 };
 
-static struct video_device qcam_template = {
-	.name		= "Colour QuickCam",
-	.fops           = &qcam_fops,
-	.release 	= video_device_release_empty,
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+	.vidioc_querycap    		    = qcam_querycap,
+	.vidioc_g_input      		    = qcam_g_input,
+	.vidioc_s_input      		    = qcam_s_input,
+	.vidioc_enum_input   		    = qcam_enum_input,
+	.vidioc_queryctrl 		    = qcam_queryctrl,
+	.vidioc_g_ctrl  		    = qcam_g_ctrl,
+	.vidioc_s_ctrl 			    = qcam_s_ctrl,
+	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
 };
 
 /* Initialize the QuickCam driver control structure. */
 
-static struct qcam_device *qcam_init(struct parport *port)
+static struct qcam *qcam_init(struct parport *port)
 {
-	struct qcam_device *q;
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
 
-	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
-	if (q == NULL)
+	qcam = kzalloc(sizeof(*qcam), GFP_KERNEL);
+	if (qcam == NULL)
 		return NULL;
 
-	q->pport = port;
-	q->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
+	v4l2_dev = &qcam->v4l2_dev;
+	strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name));
+
+	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		return NULL;
+	}
+
+	qcam->pport = port;
+	qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
 					  NULL, 0, NULL);
 
-	q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
+	qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
 
-	if (q->pdev == NULL) {
-		printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
-		       port->name);
-		kfree(q);
+	if (qcam->pdev == NULL) {
+		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+		kfree(qcam);
 		return NULL;
 	}
 
-	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-
-	mutex_init(&q->lock);
-	q->width = q->ccd_width = 320;
-	q->height = q->ccd_height = 240;
-	q->mode = QC_MILLIONS | QC_DECIMATION_1;
-	q->contrast = 192;
-	q->brightness = 240;
-	q->whitebal = 128;
-	q->top = 1;
-	q->left = 14;
-	return q;
+	strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name));
+	qcam->vdev.v4l2_dev = v4l2_dev;
+	qcam->vdev.fops = &qcam_fops;
+	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+	qcam->vdev.release = video_device_release_empty;
+	video_set_drvdata(&qcam->vdev, qcam);
+
+	mutex_init(&qcam->lock);
+	qcam->width = qcam->ccd_width = 320;
+	qcam->height = qcam->ccd_height = 240;
+	qcam->mode = QC_MILLIONS | QC_DECIMATION_1;
+	qcam->contrast = 192;
+	qcam->brightness = 240;
+	qcam->whitebal = 128;
+	qcam->top = 1;
+	qcam->left = 14;
+	return qcam;
 }
 
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
-
 static int init_cqcam(struct parport *port)
 {
-	struct qcam_device *qcam;
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
 
 	if (parport[0] != -1) {
 		/* The user gave specific instructions */
@@ -777,6 +810,8 @@ static int init_cqcam(struct parport *port)
 	if (qcam == NULL)
 		return -ENODEV;
 
+	v4l2_dev = &qcam->v4l2_dev;
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
@@ -793,14 +828,14 @@ static int init_cqcam(struct parport *port)
 	parport_release(qcam->pdev);
 
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
+		v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n",
 		       qcam->pport->name);
 		parport_unregister_device(qcam->pdev);
 		kfree(qcam);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "%s: Colour QuickCam found on %s\n",
+	v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n",
 	       video_device_node_name(&qcam->vdev), qcam->pport->name);
 
 	qcams[num_cams++] = qcam;
@@ -808,7 +843,7 @@ static int init_cqcam(struct parport *port)
 	return 0;
 }
 
-static void close_cqcam(struct qcam_device *qcam)
+static void close_cqcam(struct qcam *qcam)
 {
 	video_unregister_device(&qcam->vdev);
 	parport_unregister_device(qcam->pdev);
@@ -833,7 +868,7 @@ static struct parport_driver cqcam_driver = {
 
 static int __init cqcam_init(void)
 {
-	printk(BANNER "\n");
+	printk(KERN_INFO BANNER "\n");
 
 	return parport_register_driver(&cqcam_driver);
 }
@@ -852,14 +887,5 @@ MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
 MODULE_DESCRIPTION(BANNER);
 MODULE_LICENSE("GPL");
 
-/* FIXME: parport=auto would never have worked, surely? --RR */
-MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
-			  "probe=<0|1|2> for camera detection method\n"
-			  "force_rgb=<0|1> for RGB data format (default BGR)");
-module_param_array(parport, int, NULL, 0);
-module_param(probe, int, 0);
-module_param(force_rgb, bool, 0);
-module_param(video_nr, int, 0);
-
 module_init(cqcam_init);
 module_exit(cqcam_cleanup);
diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c
index ef1f8939998..58d193ff591 100644
--- a/drivers/media/video/cpia_usb.c
+++ b/drivers/media/video/cpia_usb.c
@@ -584,7 +584,6 @@ static void cpia_disconnect(struct usb_interface *intf)
 {
 	struct cam_data *cam = usb_get_intfdata(intf);
 	struct usb_cpia *ucpia;
-	struct usb_device *udev;
 
 	usb_set_intfdata(intf, NULL);
 	if (!cam)
@@ -606,8 +605,6 @@ static void cpia_disconnect(struct usb_interface *intf)
 	if (waitqueue_active(&ucpia->wq_stream))
 		wake_up_interruptible(&ucpia->wq_stream);
 
-	udev = interface_to_usbdev(intf);
-
 	ucpia->curbuff = ucpia->workbuff = NULL;
 
 	vfree(ucpia->buffers[2]);
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index b5d7cbf4528..d50d69da387 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -1,7 +1,7 @@
 /*
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
  *
  *  Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.c b/drivers/media/video/cx18/cx18-alsa-mixer.c
index ef21114309f..341bddc00b7 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.c
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.c
@@ -2,7 +2,7 @@
  *  ALSA mixer controls for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.h b/drivers/media/video/cx18/cx18-alsa-mixer.h
index 2d418db000f..ec9238793f6 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.h
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.h
@@ -2,7 +2,7 @@
  *  ALSA mixer controls for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
index 2bd312daeb1..8f55692db36 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -2,7 +2,7 @@
  *  ALSA PCM device for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
  *
  *  Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.h b/drivers/media/video/cx18/cx18-alsa-pcm.h
index 325662c647a..d26e51f9457 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.h
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.h
@@ -2,7 +2,7 @@
  *  ALSA PCM device for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa.h b/drivers/media/video/cx18/cx18-alsa.h
index 88a1cde7540..447da374c9e 100644
--- a/drivers/media/video/cx18/cx18-alsa.h
+++ b/drivers/media/video/cx18/cx18-alsa.h
@@ -1,7 +1,7 @@
 /*
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index 9e30983f2ff..43d09a24b26 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -4,7 +4,7 @@
  *  Derived from cx25840-audio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 0e5006b1427..a41951cab27 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -4,7 +4,7 @@
  *  Derived from cx25840-core.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -1021,86 +1021,74 @@ static int cx18_av_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
 	return -EINVAL;
 }
 
-static int cx18_av_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return cx18_av_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
-static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
 	struct cx18_av_state *state = to_cx18_av_state(sd);
 	struct cx18 *cx = v4l2_get_subdevdata(sd);
-
-	struct v4l2_pix_format *pix;
 	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
 	int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		pix = &(fmt->fmt.pix);
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
 
-		Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
-		Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 
-		Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
-		Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
+	Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
+	Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
 
-		/*
-		 * This adjustment reflects the excess of vactive, set in
-		 * cx18_av_std_setup(), above standard values:
-		 *
-		 * 480 + 1 for 60 Hz systems
-		 * 576 + 3 for 50 Hz systems
-		 */
-		Vlines = pix->height + (is_50Hz ? 3 : 1);
-
-		/*
-		 * Invalid height and width scaling requests are:
-		 * 1. width less than 1/16 of the source width
-		 * 2. width greater than the source width
-		 * 3. height less than 1/8 of the source height
-		 * 4. height greater than the source height
-		 */
-		if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
-		    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
-			CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
-				     pix->width, pix->height);
-			return -ERANGE;
-		}
+	Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
+	Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
 
-		HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
-		VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
-		VSC &= 0x1fff;
+	/*
+	 * This adjustment reflects the excess of vactive, set in
+	 * cx18_av_std_setup(), above standard values:
+	 *
+	 * 480 + 1 for 60 Hz systems
+	 * 576 + 3 for 50 Hz systems
+	 */
+	Vlines = fmt->height + (is_50Hz ? 3 : 1);
 
-		if (pix->width >= 385)
-			filter = 0;
-		else if (pix->width > 192)
-			filter = 1;
-		else if (pix->width > 96)
-			filter = 2;
-		else
-			filter = 3;
+	/*
+	 * Invalid height and width scaling requests are:
+	 * 1. width less than 1/16 of the source width
+	 * 2. width greater than the source width
+	 * 3. height less than 1/8 of the source height
+	 * 4. height greater than the source height
+	 */
+	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+	    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+		CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
+			     fmt->width, fmt->height);
+		return -ERANGE;
+	}
 
-		CX18_DEBUG_INFO_DEV(sd,
-				    "decoder set size %dx%d -> scale  %ux%u\n",
-				    pix->width, pix->height, HSC, VSC);
-
-		/* HSCALE=HSC */
-		cx18_av_write(cx, 0x418, HSC & 0xff);
-		cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
-		cx18_av_write(cx, 0x41a, HSC >> 16);
-		/* VSCALE=VSC */
-		cx18_av_write(cx, 0x41c, VSC & 0xff);
-		cx18_av_write(cx, 0x41d, VSC >> 8);
-		/* VS_INTRLACE=1 VFILT=filter */
-		cx18_av_write(cx, 0x41e, 0x8 | filter);
-		break;
+	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+	VSC &= 0x1fff;
 
-	default:
-		return -EINVAL;
-	}
+	if (fmt->width >= 385)
+		filter = 0;
+	else if (fmt->width > 192)
+		filter = 1;
+	else if (fmt->width > 96)
+		filter = 2;
+	else
+		filter = 3;
+
+	CX18_DEBUG_INFO_DEV(sd,
+			    "decoder set size %dx%d -> scale  %ux%u\n",
+			    fmt->width, fmt->height, HSC, VSC);
+
+	/* HSCALE=HSC */
+	cx18_av_write(cx, 0x418, HSC & 0xff);
+	cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
+	cx18_av_write(cx, 0x41a, HSC >> 16);
+	/* VSCALE=VSC */
+	cx18_av_write(cx, 0x41c, VSC & 0xff);
+	cx18_av_write(cx, 0x41d, VSC >> 8);
+	/* VS_INTRLACE=1 VFILT=filter */
+	cx18_av_write(cx, 0x41e, 0x8 | filter);
 	return 0;
 }
 
@@ -1398,8 +1386,7 @@ static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = {
 static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
 	.s_routing = cx18_av_s_video_routing,
 	.s_stream = cx18_av_s_stream,
-	.g_fmt = cx18_av_g_fmt,
-	.s_fmt = cx18_av_s_fmt,
+	.s_mbus_fmt = cx18_av_s_mbus_fmt,
 };
 
 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index c106967bdcc..1956991795e 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -4,7 +4,7 @@
  *  Derived from cx25840-core.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index b9e8cc5d264..280aa4d2248 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -2,7 +2,7 @@
  *  cx18 ADEC firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 74e122b5fc4..6b805afe5d2 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index 796e517300a..3e750068f27 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 4b4b46544d5..67043c7b452 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -297,14 +297,13 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		if (p.video_encoding != cx->params.video_encoding) {
 			int is_mpeg1 = p.video_encoding ==
 						V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-			struct v4l2_format fmt;
+			struct v4l2_mbus_framefmt fmt;
 
 			/* fix videodecoder resolution */
-			fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			fmt.fmt.pix.width = cx->params.width
-						/ (is_mpeg1 ? 2 : 1);
-			fmt.fmt.pix.height = cx->params.height;
-			v4l2_subdev_call(cx->sd_av, video, s_fmt, &fmt);
+			fmt.width = cx->params.width / (is_mpeg1 ? 2 : 1);
+			fmt.height = cx->params.height;
+			fmt.code = V4L2_MBUS_FMT_FIXED;
+			v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt);
 		}
 		priv.cx = cx;
 		priv.s = &cx->streams[id->type];
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index c95a86ba33b..df60f27337c 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-driver.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index b9728e8eee4..9bc51a99376 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-driver.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 0ae2c2e1eab..6d19f040d70 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -2,7 +2,7 @@
  *  cx18 functions for DVB support
  *
  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index e12a15020cd..9f23b90732f 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-fileops.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 83cd559cc60..1b3fb502e6b 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -2,7 +2,7 @@
  *  cx18 firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index 86a204b5448..5374aeb0cd2 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-gpio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index f9a5ca3566a..4aea2ef88e8 100644
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-gpio.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index cfa1f289b0f..809f7d37129 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-i2c.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
index ec5b3d7bcc6..49b9dbd0624 100644
--- a/drivers/media/video/cx18/cx18-io.c
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -2,7 +2,7 @@
  *  cx18 driver PCI memory mapped IO access routines
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 2635b3a8cc9..18974d886cf 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -2,7 +2,7 @@
  *  cx18 driver PCI memory mapped IO access routines
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
 /*
  * Readback and retry of MMIO access for reliability:
  * The concept was suggested by Steve Toth <stoth@linuxtv.org>.
- * The implmentation is the fault of Andy Walls <awalls@radix.net>.
+ * The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>.
  *
  * *write* functions are implied to retry the mmio unless suffixed with _noretry
  * *read* functions never retry the mmio (it never helps to do so)
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 2530fc54daa..d6792405f8d 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-ioctl.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -274,6 +274,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh,
 {
 	struct cx18_open_id *id = fh;
 	struct cx18 *cx = id->cx;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret;
 	int w, h;
 
@@ -293,9 +294,10 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh,
 	if (atomic_read(&cx->ana_capturing) > 0)
 		return -EBUSY;
 
-	cx->params.width = w;
-	cx->params.height = h;
-	v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
+	mbus_fmt.width = cx->params.width = w;
+	mbus_fmt.height = cx->params.height = h;
+	mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+	v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt);
 	return cx18_g_fmt_vid_cap(file, fh, fmt);
 }
 
@@ -1079,7 +1081,7 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd,
 		    unsigned long arg)
 {
 	struct video_device *vfd = video_devdata(filp);
-	struct cx18_open_id *id = (struct cx18_open_id *)filp->private_data;
+	struct cx18_open_id *id = filp->private_data;
 	struct cx18 *cx = id->cx;
 	long res;
 
diff --git a/drivers/media/video/cx18/cx18-ioctl.h b/drivers/media/video/cx18/cx18-ioctl.h
index e2ca0d15211..dcb2559ad52 100644
--- a/drivers/media/video/cx18/cx18-ioctl.h
+++ b/drivers/media/video/cx18/cx18-ioctl.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-ioctl.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index af2f504eda2..80edfe93a3d 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -2,7 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h
index 91f0b5278ef..30e7eaf8cb5 100644
--- a/drivers/media/video/cx18/cx18-irq.h
+++ b/drivers/media/video/cx18/cx18-irq.h
@@ -2,7 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 6dcce297752..956aa190ecc 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -2,7 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 33a3491c453..077952fcbcc 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -2,7 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index aefc8c8cf3c..8884537bd62 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-queue.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 88a6d34ad3b..4201ddc1609 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-queue.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c
index 34b4d03c55c..85cc59637e5 100644
--- a/drivers/media/video/cx18/cx18-scb.c
+++ b/drivers/media/video/cx18/cx18-scb.c
@@ -2,7 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 368f23d0870..08877652e32 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -2,7 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index f5c91261b2d..9045f1ece0e 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-streams.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 0bff0fa2976..77412bee596 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-streams.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index 2782709b263..e76014561aa 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -993,6 +993,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct cx231xx *dev = fh->dev;
 	int rc;
 	struct cx231xx_fmt *fmt;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
 	rc = check_dev(dev);
 	if (rc < 0)
@@ -1026,7 +1027,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	dev->format = fmt;
 	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
 
-	call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 
 	/* Set the correct alternate setting for this resolution */
 	cx231xx_resolution_set(dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 022b480918c..2bf44ef10fe 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -1113,7 +1113,6 @@ invalid:
 void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
 {
 	int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-	int temporal = p->video_temporal_filter;
 
 	/* Stream */
 	printk(KERN_INFO "%s: Stream: %s",
@@ -1179,14 +1178,11 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
 		    V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE),
 		p->video_spatial_filter);
 
-	if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480))
-		temporal = 0;
-
 	printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
 		prefix,
 		cx2341x_menu_item(p,
 			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE),
-		temporal);
+		p->video_temporal_filter);
 	printk(KERN_INFO
 		"%s: Median Filter:   %s, Luma [%d, %d], Chroma [%d, %d]\n",
 		prefix,
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index d639186f645..2014daedee8 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -408,10 +408,18 @@ struct cx23885_subid cx23885_subids[] = {
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
 	}, {
 		.subvendor = 0x0070,
+		.subdevice = 0x221d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
 		.subdevice = 0x2251,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
 	}, {
 		.subvendor = 0x0070,
+		.subdevice = 0x2259,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
 		.subdevice = 0x2291,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
 	}, {
@@ -419,6 +427,38 @@ struct cx23885_subid cx23885_subids[] = {
 		.subdevice = 0x2295,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
 	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2299,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x229d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f0,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f2,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f3,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f4,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f5,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
 		.subvendor = 0x14f1,
 		.subdevice = 0x8651,
 		.card      = CX23885_BOARD_MYGICA_X8506,
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 0dde57e96d3..ff76f64edac 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1142,7 +1142,7 @@ void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf)
 
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb, 0, 0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
@@ -1953,8 +1953,12 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
 		goto fail_irq;
 	}
 
-	err = request_irq(pci_dev->irq, cx23885_irq,
-			  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	if (!pci_enable_msi(pci_dev))
+		err = request_irq(pci_dev->irq, cx23885_irq,
+				  IRQF_DISABLED, dev->name, dev);
+	else
+		err = request_irq(pci_dev->irq, cx23885_irq,
+				  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
 		printk(KERN_ERR "%s: can't get IRQ %d\n",
 		       dev->name, pci_dev->irq);
@@ -2000,6 +2004,7 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
 
 	/* unregister stuff */
 	free_irq(pci_dev->irq, dev);
+	pci_disable_msi(pci_dev);
 
 	cx23885_dev_unregister(dev);
 	v4l2_device_unregister(v4l2_dev);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 9e1460828b2..3d70af28388 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -991,6 +991,8 @@ static int dvb_register(struct cx23885_tsport *port)
 	ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
 					&dev->pci->dev, adapter_nr, 0,
 					cx23885_dvb_fe_ioctl_override);
+	if (ret)
+		return ret;
 
 	/* init CI & MAC */
 	switch (dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 4172cb38742..d4746e06451 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -365,7 +365,17 @@ int cx23885_i2c_register(struct cx23885_i2c *bus)
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&bus->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and the IR receiver device only
+		 * replies to reads.
+		 */
+		if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0,
+				   I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK,
+				   NULL) >= 0) {
+			info.addr = addr_list[0];
+			i2c_new_device(&bus->i2c_adap, &info);
+		}
 	}
 
 	return bus->i2c_rc;
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 8d306d8bb61..d0b1613ede2 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -5,7 +5,7 @@
  *
  *  Most of this file is
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  However, the cx23885_input_{init,fini} functions contained herein are
  *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
@@ -37,161 +37,55 @@
 
 #include <linux/input.h>
 #include <linux/slab.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <media/v4l2-subdev.h>
 
 #include "cx23885.h"
 
-#define RC5_BITS		14
-#define RC5_HALF_BITS		(2*RC5_BITS)
-#define RC5_HALF_BITS_MASK	((1 << RC5_HALF_BITS) - 1)
-
-#define RC5_START_BITS_NORMAL	0x3 /* Command range  0 -  63 */
-#define RC5_START_BITS_EXTENDED	0x2 /* Command range 64 - 127 */
-
-#define RC5_EXTENDED_COMMAND_OFFSET	64
-
 #define MODULE_NAME "cx23885"
 
-static inline unsigned int rc5_command(u32 rc5_baseband)
+static void convert_measurement(u32 x, struct ir_raw_event *y)
 {
-	return RC5_INSTR(rc5_baseband) +
-		((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
-			? RC5_EXTENDED_COMMAND_OFFSET : 0);
-}
-
-static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
-{
-	struct card_ir *ir_input = dev->ir_input;
-	unsigned int code, command;
-	u32 rc5;
-
-	/* Ignore codes that are too short to be valid RC-5 */
-	if (ir_input->last_bit < (RC5_HALF_BITS - 1))
-		return;
-
-	/* The library has the manchester coding backwards; XOR to adapt. */
-	code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
-	rc5 = ir_rc5_decode(code);
-
-	switch (RC5_START(rc5)) {
-	case RC5_START_BITS_NORMAL:
-		break;
-	case RC5_START_BITS_EXTENDED:
-		/* Don't allow if the remote only emits standard commands */
-		if (ir_input->start == RC5_START_BITS_NORMAL)
-			return;
-		break;
-	default:
+	if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
+		y->pulse = false;
+		y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
 		return;
 	}
 
-	if (ir_input->addr != RC5_ADDR(rc5))
-		return;
-
-	/* Don't generate a keypress for RC-5 auto-repeated keypresses */
-	command = rc5_command(rc5);
-	if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) ||
-	    command != rc5_command(ir_input->last_rc5) ||
-	    /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
-	    RC5_START(ir_input->last_rc5) == 0) {
-		/* This keypress is differnet: not an auto repeat */
-		ir_input_nokey(ir_input->dev, &ir_input->ir);
-		ir_input_keydown(ir_input->dev, &ir_input->ir, command);
-	}
-	ir_input->last_rc5 = rc5;
-
-	/* Schedule when we should do the key up event: ir_input_nokey() */
-	mod_timer(&ir_input->timer_keyup,
-		  jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
+	y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
+	y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
 }
 
-static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
-					       u32 ns_pulse)
+static void cx23885_input_process_measurements(struct cx23885_dev *dev,
+					       bool overrun)
 {
-	const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
-	struct card_ir *ir_input = dev->ir_input;
-	int i, level, quarterbits, halfbits;
-
-	if (!ir_input->active) {
-		ir_input->active = 1;
-		/* assume an initial space that we may not detect or measure */
-		ir_input->code = 0;
-		ir_input->last_bit = 0;
-	}
+	struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
+	struct ir_raw_event kernel_ir_event;
 
-	if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
-		ir_input->last_bit++; /* Account for the final space */
-		ir_input->active = 0;
-		cx23885_input_process_raw_rc5(dev);
-		return;
-	}
-
-	level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;
-
-	/* Skip any leading space to sync to the start bit */
-	if (ir_input->last_bit == 0 && level == 0)
-		return;
-
-	/*
-	 * With valid RC-5 we can get up to two consecutive half-bits in a
-	 * single pulse measurment.  Experiments have shown that the duration
-	 * of a half-bit can vary.  Make sure we always end up with an even
-	 * number of quarter bits at the same level (mark or space).
-	 */
-	ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
-	quarterbits = ns_pulse / rc5_quarterbit_ns;
-	if (quarterbits & 1)
-		quarterbits++;
-	halfbits = quarterbits / 2;
-
-	for (i = 0; i < halfbits; i++) {
-		ir_input->last_bit++;
-		ir_input->code |= (level << ir_input->last_bit);
-
-		if (ir_input->last_bit >= RC5_HALF_BITS-1) {
-			ir_input->active = 0;
-			cx23885_input_process_raw_rc5(dev);
-			/*
-			 * If level is 1, a leading mark is invalid for RC5.
-			 * If level is 0, we scan past extra intial space.
-			 * Either way we don't want to reactivate collecting
-			 * marks or spaces here with any left over half-bits.
-			 */
-			break;
-		}
-	}
-}
-
-static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
-						   bool add_eom)
-{
-	struct card_ir *ir_input = dev->ir_input;
-	struct ir_input_state *ir_input_state = &ir_input->ir;
-
-	u32 ns_pulse[RC5_HALF_BITS+1];
-	ssize_t num = 0;
+	u32 sd_ir_data[64];
+	ssize_t num;
 	int count, i;
+	bool handle = false;
 
 	do {
-		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
-				 sizeof(ns_pulse), &num);
+		num = 0;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data,
+				 sizeof(sd_ir_data), &num);
 
 		count = num / sizeof(u32);
 
-		/* Append an end of Rx seq, if the caller requested */
-		if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
-			ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
-			count++;
+		for (i = 0; i < count; i++) {
+			convert_measurement(sd_ir_data[i], &kernel_ir_event);
+			ir_raw_event_store(kernel_ir->inp_dev,
+					   &kernel_ir_event);
+			handle = true;
 		}
-
-		/* Just drain the Rx FIFO, if we're called, but not RC-5 */
-		if (ir_input_state->ir_type != IR_TYPE_RC5)
-			continue;
-
-		for (i = 0; i < count; i++)
-			cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
 	} while (num != 0);
+
+	if (overrun)
+		ir_raw_event_reset(kernel_ir->inp_dev);
+	else if (handle)
+		ir_raw_event_handle(kernel_ir->inp_dev);
 }
 
 void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
@@ -230,7 +124,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	}
 
 	if (data_available)
-		cx23885_input_process_pulse_widths_rc5(dev, overrun);
+		cx23885_input_process_measurements(dev, overrun);
 
 	if (overrun) {
 		/* If there was a FIFO overrun, clear & restart the device */
@@ -241,34 +135,15 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	}
 }
 
-static void cx23885_input_ir_start(struct cx23885_dev *dev)
+static int cx23885_input_ir_start(struct cx23885_dev *dev)
 {
-	struct card_ir *ir_input = dev->ir_input;
-	struct ir_input_state *ir_input_state = &ir_input->ir;
 	struct v4l2_subdev_ir_parameters params;
 
 	if (dev->sd_ir == NULL)
-		return;
+		return -ENODEV;
 
 	atomic_set(&dev->ir_input_stopping, 0);
 
-	/* keyup timer set up, if needed */
-	switch (dev->board) {
-	case CX23885_BOARD_HAUPPAUGE_HVR1850:
-	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		setup_timer(&ir_input->timer_keyup,
-			    ir_rc5_timer_keyup,	/* Not actually RC-5 specific */
-			    (unsigned long) ir_input);
-		if (ir_input_state->ir_type == IR_TYPE_RC5) {
-			/*
-			 * RC-5 repeats a held key every
-			 * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
-			 */
-			ir_input->rc5_key_timeout = 115;
-		}
-		break;
-	}
-
 	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
@@ -299,11 +174,21 @@ static void cx23885_input_ir_start(struct cx23885_dev *dev)
 		break;
 	}
 	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	return 0;
+}
+
+static int cx23885_input_ir_open(void *priv)
+{
+	struct cx23885_kernel_ir *kernel_ir = priv;
+
+	if (kernel_ir->cx == NULL)
+		return -ENODEV;
+
+	return cx23885_input_ir_start(kernel_ir->cx);
 }
 
 static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 {
-	struct card_ir *ir_input = dev->ir_input;
 	struct v4l2_subdev_ir_parameters params;
 
 	if (dev->sd_ir == NULL)
@@ -327,21 +212,26 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 	}
 
 	flush_scheduled_work();
+}
 
-	switch (dev->board) {
-	case CX23885_BOARD_HAUPPAUGE_HVR1850:
-	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		del_timer_sync(&ir_input->timer_keyup);
-		break;
-	}
+static void cx23885_input_ir_close(void *priv)
+{
+	struct cx23885_kernel_ir *kernel_ir = priv;
+
+	if (kernel_ir->cx != NULL)
+		cx23885_input_ir_stop(kernel_ir->cx);
 }
 
 int cx23885_input_init(struct cx23885_dev *dev)
 {
-	struct card_ir *ir;
-	struct input_dev *input_dev;
-	char *ir_codes = NULL;
-	int ir_type, ir_addr, ir_start;
+	struct cx23885_kernel_ir *kernel_ir;
+	struct input_dev *inp_dev;
+	struct ir_dev_props *props;
+
+	char *rc_map;
+	enum rc_driver_type driver_type;
+	unsigned long allowed_protos;
+
 	int ret;
 
 	/*
@@ -354,53 +244,59 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		/* Parameters for the grey Hauppauge remote for the HVR-1850 */
-		ir_codes = RC_MAP_HAUPPAUGE_NEW;
-		ir_type = IR_TYPE_RC5;
-		ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
-		ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
+		/* Integrated CX23888 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = IR_TYPE_ALL;
+		/* The grey Hauppauge RC-5 remote */
+		rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
 		break;
-	}
-	if (ir_codes == NULL)
+	default:
 		return -ENODEV;
-
-	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev) {
-		ret = -ENOMEM;
-		goto err_out_free;
 	}
 
-	ir->dev = input_dev;
-	ir->addr = ir_addr;
-	ir->start = ir_start;
+	/* cx23885 board instance kernel IR state */
+	kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
+	if (kernel_ir == NULL)
+		return -ENOMEM;
 
-	/* init input device */
-	snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)",
-		 cx23885_boards[dev->board].name);
-	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci));
+	kernel_ir->cx = dev;
+	kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
+				    cx23885_boards[dev->board].name);
+	kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
+				    pci_name(dev->pci));
 
-	ret = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (ret < 0)
+	/* input device */
+	inp_dev = input_allocate_device();
+	if (inp_dev == NULL) {
+		ret = -ENOMEM;
 		goto err_out_free;
+	}
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	kernel_ir->inp_dev = inp_dev;
+	inp_dev->name = kernel_ir->name;
+	inp_dev->phys = kernel_ir->phys;
+	inp_dev->id.bustype = BUS_PCI;
+	inp_dev->id.version = 1;
 	if (dev->pci->subsystem_vendor) {
-		input_dev->id.vendor  = dev->pci->subsystem_vendor;
-		input_dev->id.product = dev->pci->subsystem_device;
+		inp_dev->id.vendor  = dev->pci->subsystem_vendor;
+		inp_dev->id.product = dev->pci->subsystem_device;
 	} else {
-		input_dev->id.vendor  = dev->pci->vendor;
-		input_dev->id.product = dev->pci->device;
+		inp_dev->id.vendor  = dev->pci->vendor;
+		inp_dev->id.product = dev->pci->device;
 	}
-	input_dev->dev.parent = &dev->pci->dev;
-
-	dev->ir_input = ir;
-	cx23885_input_ir_start(dev);
-
-	ret = ir_input_register(ir->dev, ir_codes, NULL, MODULE_NAME);
+	inp_dev->dev.parent = &dev->pci->dev;
+
+	/* kernel ir device properties */
+	props = &kernel_ir->props;
+	props->driver_type = driver_type;
+	props->allowed_protos = allowed_protos;
+	props->priv = kernel_ir;
+	props->open = cx23885_input_ir_open;
+	props->close = cx23885_input_ir_close;
+
+	/* Go */
+	dev->kernel_ir = kernel_ir;
+	ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME);
 	if (ret)
 		goto err_out_stop;
 
@@ -408,9 +304,12 @@ int cx23885_input_init(struct cx23885_dev *dev)
 
 err_out_stop:
 	cx23885_input_ir_stop(dev);
-	dev->ir_input = NULL;
+	dev->kernel_ir = NULL;
+	/* TODO: double check clean-up of kernel_ir->inp_dev */
 err_out_free:
-	kfree(ir);
+	kfree(kernel_ir->phys);
+	kfree(kernel_ir->name);
+	kfree(kernel_ir);
 	return ret;
 }
 
@@ -419,9 +318,11 @@ void cx23885_input_fini(struct cx23885_dev *dev)
 	/* Always stop the IR hardware from generating interrupts */
 	cx23885_input_ir_stop(dev);
 
-	if (dev->ir_input == NULL)
+	if (dev->kernel_ir == NULL)
 		return;
-	ir_input_unregister(dev->ir_input->dev);
-	kfree(dev->ir_input);
-	dev->ir_input = NULL;
+	ir_input_unregister(dev->kernel_ir->inp_dev);
+	kfree(dev->kernel_ir->phys);
+	kfree(dev->kernel_ir->name);
+	kfree(dev->kernel_ir);
+	dev->kernel_ir = NULL;
 }
diff --git a/drivers/media/video/cx23885/cx23885-input.h b/drivers/media/video/cx23885/cx23885-input.h
index 3572cb1ecfc..75ef15d3f52 100644
--- a/drivers/media/video/cx23885/cx23885-input.h
+++ b/drivers/media/video/cx23885/cx23885-input.h
@@ -3,7 +3,7 @@
  *
  *  Infrared remote control input device
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.c b/drivers/media/video/cx23885/cx23885-ioctl.c
index dfb4627fb34..44812ca7889 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.c
+++ b/drivers/media/video/cx23885/cx23885-ioctl.c
@@ -3,7 +3,7 @@
  *
  *  Various common ioctl() support functions
  *
- *  Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.h b/drivers/media/video/cx23885/cx23885-ioctl.h
index 80b0f4923c6..315be0ca5a0 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.h
+++ b/drivers/media/video/cx23885/cx23885-ioctl.h
@@ -3,7 +3,7 @@
  *
  *  Various common ioctl() support functions
  *
- *  Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c
index 6ae982cc985..6ceabd4fba0 100644
--- a/drivers/media/video/cx23885/cx23885-ir.c
+++ b/drivers/media/video/cx23885/cx23885-ir.c
@@ -3,7 +3,7 @@
  *
  *  Infrared device support routines - non-input, non-vl42_subdev routines
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -53,7 +53,7 @@ void cx23885_ir_rx_work_handler(struct work_struct *work)
 	if (events == 0)
 		return;
 
-	if (dev->ir_input)
+	if (dev->kernel_ir)
 		cx23885_input_rx_work_handler(dev, events);
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-ir.h b/drivers/media/video/cx23885/cx23885-ir.h
index 9b8a6d5d1ef..0c9d8bda9e2 100644
--- a/drivers/media/video/cx23885/cx23885-ir.h
+++ b/drivers/media/video/cx23885/cx23885-ir.h
@@ -3,7 +3,7 @@
  *
  *  Infrared device support routines - non-input, non-vl42_subdev routines
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 543b854f6a6..4e44dcda387 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -976,6 +976,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 {
 	struct cx23885_fh *fh = priv;
 	struct cx23885_dev *dev  = ((struct cx23885_fh *)priv)->dev;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int err;
 
 	dprintk(2, "%s()\n", __func__);
@@ -989,7 +990,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	fh->vidq.field = f->fmt.pix.field;
 	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__,
 		fh->width, fh->height, fh->vidq.field);
-	call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 	return 0;
 }
 
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 8d6a55e54ee..a33f2b71467 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -30,6 +30,7 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
+#include <media/ir-core.h>
 
 #include "btcx-risc.h"
 #include "cx23885-reg.h"
@@ -304,6 +305,15 @@ struct cx23885_tsport {
 	void                       *port_priv;
 };
 
+struct cx23885_kernel_ir {
+	struct cx23885_dev	*cx;
+	char			*name;
+	char			*phys;
+
+	struct input_dev	*inp_dev;
+	struct ir_dev_props	props;
+};
+
 struct cx23885_dev {
 	atomic_t                   refcount;
 	struct v4l2_device 	   v4l2_dev;
@@ -363,7 +373,7 @@ struct cx23885_dev {
 	struct work_struct	   ir_tx_work;
 	unsigned long		   ir_tx_notifications;
 
-	struct card_ir		   *ir_input;
+	struct cx23885_kernel_ir   *kernel_ir;
 	atomic_t		   ir_input_stopping;
 
 	/* V4l */
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index ad728d767d6..f63d378257a 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -3,7 +3,7 @@
  *
  *  CX23888 Integrated Consumer Infrared Controller
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23888-ir.h b/drivers/media/video/cx23885/cx23888-ir.h
index 3d446f9eb94..d2de41caaf1 100644
--- a/drivers/media/video/cx23885/cx23888-ir.h
+++ b/drivers/media/video/cx23885/cx23888-ir.h
@@ -3,7 +3,7 @@
  *
  *  CX23888 Integrated Consumer Infrared Controller
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 8b6fb354437..bb4872b2ceb 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1014,75 +1014,59 @@ static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 
 /* ----------------------------------------------------------------------- */
 
-static int cx25840_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		return cx25840_g_sliced_fmt(sd, &fmt->fmt.sliced);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int cx25840_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
 	struct cx25840_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct v4l2_pix_format *pix;
 	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
 	int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		pix = &(fmt->fmt.pix);
-
-		Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
-		Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
-
-		Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
-		Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
 
-		Vlines = pix->height + (is_50Hz ? 4 : 7);
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 
-		if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
-		    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
-			v4l_err(client, "%dx%d is not a valid size!\n",
-				    pix->width, pix->height);
-			return -ERANGE;
-		}
+	Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+	Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
 
-		HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
-		VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
-		VSC &= 0x1fff;
+	Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+	Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
 
-		if (pix->width >= 385)
-			filter = 0;
-		else if (pix->width > 192)
-			filter = 1;
-		else if (pix->width > 96)
-			filter = 2;
-		else
-			filter = 3;
-
-		v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale  %ux%u\n",
-			    pix->width, pix->height, HSC, VSC);
-
-		/* HSCALE=HSC */
-		cx25840_write(client, 0x418, HSC & 0xff);
-		cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
-		cx25840_write(client, 0x41a, HSC >> 16);
-		/* VSCALE=VSC */
-		cx25840_write(client, 0x41c, VSC & 0xff);
-		cx25840_write(client, 0x41d, VSC >> 8);
-		/* VS_INTRLACE=1 VFILT=filter */
-		cx25840_write(client, 0x41e, 0x8 | filter);
-		break;
+	Vlines = fmt->height + (is_50Hz ? 4 : 7);
 
-	default:
-		return -EINVAL;
+	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+			(Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+		v4l_err(client, "%dx%d is not a valid size!\n",
+				fmt->width, fmt->height);
+		return -ERANGE;
 	}
 
+	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+	VSC &= 0x1fff;
+
+	if (fmt->width >= 385)
+		filter = 0;
+	else if (fmt->width > 192)
+		filter = 1;
+	else if (fmt->width > 96)
+		filter = 2;
+	else
+		filter = 3;
+
+	v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale  %ux%u\n",
+			fmt->width, fmt->height, HSC, VSC);
+
+	/* HSCALE=HSC */
+	cx25840_write(client, 0x418, HSC & 0xff);
+	cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
+	cx25840_write(client, 0x41a, HSC >> 16);
+	/* VSCALE=VSC */
+	cx25840_write(client, 0x41c, VSC & 0xff);
+	cx25840_write(client, 0x41d, VSC >> 8);
+	/* VS_INTRLACE=1 VFILT=filter */
+	cx25840_write(client, 0x41e, 0x8 | filter);
 	return 0;
 }
 
@@ -1627,8 +1611,7 @@ static const struct v4l2_subdev_audio_ops cx25840_audio_ops = {
 
 static const struct v4l2_subdev_video_ops cx25840_video_ops = {
 	.s_routing = cx25840_s_video_routing,
-	.g_fmt = cx25840_g_fmt,
-	.s_fmt = cx25840_s_fmt,
+	.s_mbus_fmt = cx25840_s_mbus_fmt,
 	.s_stream = cx25840_s_stream,
 };
 
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 33082c96745..4f383cdf529 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -54,6 +54,12 @@
 	Data type declarations - Can be moded to a header file later
  ****************************************************************************/
 
+struct cx88_audio_buffer {
+	unsigned int               bpl;
+	struct btcx_riscmem        risc;
+	struct videobuf_dmabuf     dma;
+};
+
 struct cx88_audio_dev {
 	struct cx88_core           *core;
 	struct cx88_dmaqueue       q;
@@ -75,7 +81,7 @@ struct cx88_audio_dev {
 
 	struct videobuf_dmabuf     *dma_risc;
 
-	struct cx88_buffer	   *buf;
+	struct cx88_audio_buffer   *buf;
 
 	struct snd_pcm_substream   *substream;
 };
@@ -123,7 +129,7 @@ MODULE_PARM_DESC(debug,"enable debug messages");
 
 static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 {
-	struct cx88_buffer   *buf = chip->buf;
+	struct cx88_audio_buffer *buf = chip->buf;
 	struct cx88_core *core=chip->core;
 	struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25];
 
@@ -283,7 +289,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip)
 	BUG_ON(!chip->dma_size);
 
 	dprintk(2,"Freeing buffer\n");
-	videobuf_sg_dma_unmap(&chip->pci->dev, chip->dma_risc);
+	videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc);
 	videobuf_dma_free(chip->dma_risc);
 	btcx_riscmem_free(chip->pci,&chip->buf->risc);
 	kfree(chip->buf);
@@ -376,7 +382,7 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
 	snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
 	struct videobuf_dmabuf *dma;
 
-	struct cx88_buffer *buf;
+	struct cx88_audio_buffer *buf;
 	int ret;
 
 	if (substream->runtime->dma_area) {
@@ -391,30 +397,25 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
 	BUG_ON(!chip->dma_size);
 	BUG_ON(chip->num_periods & (chip->num_periods-1));
 
-	buf = videobuf_sg_alloc(sizeof(*buf));
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
 	if (NULL == buf)
 		return -ENOMEM;
 
-	buf->vb.memory = V4L2_MEMORY_MMAP;
-	buf->vb.field  = V4L2_FIELD_NONE;
-	buf->vb.width  = chip->period_size;
-	buf->bpl       = chip->period_size;
-	buf->vb.height = chip->num_periods;
-	buf->vb.size   = chip->dma_size;
+	buf->bpl = chip->period_size;
 
-	dma = videobuf_to_dma(&buf->vb);
+	dma = &buf->dma;
 	videobuf_dma_init(dma);
 	ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
-			(PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT));
+			(PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT));
 	if (ret < 0)
 		goto error;
 
-	ret = videobuf_sg_dma_map(&chip->pci->dev, dma);
+	ret = videobuf_dma_map(&chip->pci->dev, dma);
 	if (ret < 0)
 		goto error;
 
 	ret = cx88_risc_databuffer(chip->pci, &buf->risc, dma->sglist,
-				   buf->vb.width, buf->vb.height, 1);
+				   chip->period_size, chip->num_periods, 1);
 	if (ret < 0)
 		goto error;
 
@@ -422,12 +423,10 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
 	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC);
 	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
 
-	buf->vb.state = VIDEOBUF_PREPARED;
-
 	chip->buf = buf;
 	chip->dma_risc = dma;
 
-	substream->runtime->dma_area = chip->dma_risc->vmalloc;
+	substream->runtime->dma_area = chip->dma_risc->vaddr;
 	substream->runtime->dma_bytes = chip->dma_size;
 	substream->runtime->dma_addr = 0;
 	return 0;
@@ -740,7 +739,7 @@ static int __devinit snd_cx88_create(struct snd_card *card,
 
 	pci_set_master(pci);
 
-	chip = (snd_cx88_card_t *) card->private_data;
+	chip = card->private_data;
 
 	core = cx88_core_get(pci);
 	if (NULL == core) {
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 2918a6e38fe..e8416b76da6 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -45,6 +45,10 @@ static unsigned int latency = UNSET;
 module_param(latency,int,0444);
 MODULE_PARM_DESC(latency,"pci latency timer");
 
+static int disable_ir;
+module_param(disable_ir, int, 0444);
+MODULE_PARM_DESC(latency, "Disable IR support");
+
 #define info_printk(core, fmt, arg...) \
 	printk(KERN_INFO "%s: " fmt, core->name , ## arg)
 
@@ -3498,7 +3502,10 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 	}
 
 	cx88_card_setup(core);
-	cx88_ir_init(core, pci);
+	if (!disable_ir) {
+		cx88_i2c_init_ir(core);
+		cx88_ir_init(core, pci);
+	}
 
 	return core;
 }
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 8b21457111b..85eb266fb35 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -218,7 +218,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
 
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index ee1ca39db06..375ad53f796 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -181,6 +181,11 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 	} else
 		printk("%s: i2c register FAILED\n", core->name);
 
+	return core->i2c_rc;
+}
+
+void cx88_i2c_init_ir(struct cx88_core *core)
+{
 	/* Instantiate the IR receiver device, if present */
 	if (0 == core->i2c_rc) {
 		struct i2c_board_info info;
@@ -188,12 +193,25 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 			0x18, 0x6b, 0x71,
 			I2C_CLIENT_END
 		};
+		const unsigned short *addrp;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&core->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and at least some R receiver
+		 * devices only reply to reads.
+		 */
+		for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+			if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+					   I2C_SMBUS_READ, 0,
+					   I2C_SMBUS_QUICK, NULL) >= 0) {
+				info.addr = *addrp;
+				i2c_new_device(&core->i2c_adap, &info);
+				break;
+			}
+		}
 	}
-	return core->i2c_rc;
 }
 
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index e185289e446..eccc5e49a35 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 
 #include "cx88.h"
+#include <media/ir-core.h>
 #include <media/ir-common.h>
 
 #define MODULE_NAME "cx88xx"
@@ -39,8 +40,8 @@
 struct cx88_IR {
 	struct cx88_core *core;
 	struct input_dev *input;
-	struct ir_input_state ir;
 	struct ir_dev_props props;
+	u64 ir_type;
 
 	int users;
 
@@ -51,7 +52,6 @@ struct cx88_IR {
 	u32 sampling;
 	u32 samples[16];
 	int scount;
-	unsigned long release;
 
 	/* poll external decoder */
 	int polling;
@@ -125,29 +125,21 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 
 		data = (data << 4) | ((gpio_key & 0xf0) >> 4);
 
-		ir_input_keydown(ir->input, &ir->ir, data);
-		ir_input_nokey(ir->input, &ir->ir);
+		ir_keydown(ir->input, data, 0);
 
 	} else if (ir->mask_keydown) {
 		/* bit set on keydown */
-		if (gpio & ir->mask_keydown) {
-			ir_input_keydown(ir->input, &ir->ir, data);
-		} else {
-			ir_input_nokey(ir->input, &ir->ir);
-		}
+		if (gpio & ir->mask_keydown)
+			ir_keydown(ir->input, data, 0);
 
 	} else if (ir->mask_keyup) {
 		/* bit cleared on keydown */
-		if (0 == (gpio & ir->mask_keyup)) {
-			ir_input_keydown(ir->input, &ir->ir, data);
-		} else {
-			ir_input_nokey(ir->input, &ir->ir);
-		}
+		if (0 == (gpio & ir->mask_keyup))
+			ir_keydown(ir->input, data, 0);
 
 	} else {
 		/* can't distinguish keydown/up :-/ */
-		ir_input_keydown(ir->input, &ir->ir, data);
-		ir_input_nokey(ir->input, &ir->ir);
+		ir_keydown(ir->input, data, 0);
 	}
 }
 
@@ -439,9 +431,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
 
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
+	ir->ir_type = ir_type;
 
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
@@ -516,8 +506,6 @@ void cx88_ir_irq(struct cx88_core *core)
 	}
 	if (!ir->scount) {
 		/* nothing to sample */
-		if (ir->ir.keypressed && time_after(jiffies, ir->release))
-			ir_input_nokey(ir->input, &ir->ir);
 		return;
 	}
 
@@ -553,7 +541,7 @@ void cx88_ir_irq(struct cx88_core *core)
 
 		if (ircode == 0) { /* key still pressed */
 			ir_dprintk("pulse distance decoded repeat code\n");
-			ir->release = jiffies + msecs_to_jiffies(120);
+			ir_repeat(ir->input);
 			break;
 		}
 
@@ -567,10 +555,8 @@ void cx88_ir_irq(struct cx88_core *core)
 			break;
 		}
 
-		ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f);
-
-		ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f);
-		ir->release = jiffies + msecs_to_jiffies(120);
+		ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0xff);
+		ir_keydown(ir->input, (ircode >> 16) & 0xff, 0);
 		break;
 	case CX88_BOARD_HAUPPAUGE:
 	case CX88_BOARD_HAUPPAUGE_DVB_T1:
@@ -606,16 +592,16 @@ void cx88_ir_irq(struct cx88_core *core)
 		if ( dev != 0x1e && dev != 0x1f )
 			/* not a hauppauge remote */
 			break;
-		ir_input_keydown(ir->input, &ir->ir, code);
-		ir->release = jiffies + msecs_to_jiffies(120);
+		ir_keydown(ir->input, code, toggle);
 		break;
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
 		if ((ircode & 0xfffff000) != 0x3000)
 			break;
-		ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f);
-		ir->release = jiffies + msecs_to_jiffies(120);
+		/* Note: bit 0x800 being the toggle is assumed, not checked
+		   with real hardware  */
+		ir_keydown(ir->input, ircode & 0x3f, ircode & 0x0800 ? 1 : 0);
 		break;
 	}
 
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index bdb03d33653..33d161a1172 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -636,6 +636,7 @@ extern struct videobuf_queue_ops cx8800_vbi_qops;
 /* cx88-i2c.c                                                  */
 
 extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
+extern void cx88_i2c_init_ir(struct cx88_core *core);
 
 
 /* ----------------------------------------------------------- */
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 0f505086774..5b176bd7afd 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -706,16 +706,11 @@ static long dabusb_ioctl (struct file *file, unsigned int cmd, unsigned long arg
 	switch (cmd) {
 
 	case IOCTL_DAB_BULK:
-		pbulk = kmalloc(sizeof (bulk_transfer_t), GFP_KERNEL);
+		pbulk = memdup_user((void __user *)arg,
+				    sizeof(bulk_transfer_t));
 
-		if (!pbulk) {
-			ret = -ENOMEM;
-			break;
-		}
-
-		if (copy_from_user (pbulk, (void __user *) arg, sizeof (bulk_transfer_t))) {
-			ret = -EFAULT;
-			kfree (pbulk);
+		if (IS_ERR(pbulk)) {
+			ret = PTR_ERR(pbulk);
 			break;
 		}
 
diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
new file mode 100644
index 00000000000..6b195403564
--- /dev/null
+++ b/drivers/media/video/davinci/Kconfig
@@ -0,0 +1,93 @@
+config DISPLAY_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Display"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	select VIDEO_ADV7343
+	select VIDEO_THS7303
+	help
+	  Support for DM6467 based display device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Capture"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	help
+	  Support for DM6467 based capture device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+	tristate "DaVinci VPIF Driver"
+	depends on DISPLAY_DAVINCI_DM646X_EVM
+	help
+	  Support for DaVinci VPIF Driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif.
+
+config VIDEO_VPSS_SYSTEM
+	tristate "VPSS System module driver"
+	depends on ARCH_DAVINCI
+	help
+	  Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+	tristate "VPFE Video Capture Driver"
+	depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
+	select VIDEOBUF_DMA_CONTIG
+	help
+	  Support for DMx/AMx VPFE based frame grabber. This is the
+	  common V4L2 module for following DMx/AMx SoCs from Texas
+	  Instruments:- DM6446, DM365, DM355 & AM3517/05.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+	tristate "DM6446 CCDC HW module"
+	depends on VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from slave decoders.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+	tristate "DM355 CCDC HW module"
+	depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from a slave decoders
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
+config VIDEO_ISIF
+	tristate "ISIF HW module"
+	depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables ISIF hw module. This is the hardware module for
+	   configuring ISIF in VPFE to capture Raw Bayer RGB data  from
+	   a image sensor or YUV data from a YUV source.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 3a4fd851451..ffbe544e30f 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -158,6 +158,22 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/*
+ * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
+ * EM_GPIO_0 - currently unknown
+ * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
+ * EM_GPIO_2 - currently unknown
+ * EM_GPIO_3 - currently unknown
+ * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
+ * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
+ * EM_GPIO_6 - currently unknown
+ * EM_GPIO_7 - currently unknown
+ */
+static struct em28xx_reg_seq kworld_a340_digital[] = {
+	{EM28XX_R08_GPIO,	0x6d,		~EM_GPIO_4,	10},
+	{ -1,			-1,		-1,		-1},
+};
+
 /* Pinnacle Hybrid Pro eb1a:2881 */
 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 	{EM28XX_R08_GPIO,	0xfd,   ~EM_GPIO_4,	10},
@@ -1667,6 +1683,16 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = reddo_dvb_c_usb_box,
 		.has_dvb       = 1,
 	},
+	/* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
+	 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
+	 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
+	[EM2870_BOARD_KWORLD_A340] = {
+		.name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
+		.tuner_type = TUNER_ABSENT,	/* Digital-only TDA18271HD */
+		.has_dvb    = 1,
+		.dvb_gpio   = kworld_a340_digital,
+		.tuner_gpio = default_tuner_gpio,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1788,6 +1814,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
 	{ USB_DEVICE(0xeb1a, 0x50a6),
 			.driver_info = EM2860_BOARD_GADMEI_UTV330 },
+	{ USB_DEVICE(0x1b80, 0xa340),
+			.driver_info = EM2870_BOARD_KWORLD_A340 },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 331e1cac427..44c63cbd6dd 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1186,8 +1186,7 @@ int em28xx_register_extension(struct em28xx_ops *ops)
 	mutex_lock(&em28xx_devlist_mutex);
 	list_add_tail(&ops->next, &em28xx_extension_devlist);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
-		if (dev)
-			ops->init(dev);
+		ops->init(dev);
 	}
 	printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
 	mutex_unlock(&em28xx_devlist_mutex);
@@ -1201,10 +1200,8 @@ void em28xx_unregister_extension(struct em28xx_ops *ops)
 
 	mutex_lock(&em28xx_devlist_mutex);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
-		if (dev)
-			ops->fini(dev);
+		ops->fini(dev);
 	}
-
 	printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
 	list_del(&ops->next);
 	mutex_unlock(&em28xx_devlist_mutex);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cf1d8c3655f..3ac8d3025fe 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -30,11 +30,13 @@
 #include "tuner-simple.h"
 
 #include "lgdt330x.h"
+#include "lgdt3305.h"
 #include "zl10353.h"
 #include "s5h1409.h"
 #include "mt352.h"
 #include "mt352_priv.h" /* FIXME */
 #include "tda1002x.h"
+#include "tda18271.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -231,6 +233,18 @@ static struct lgdt330x_config em2880_lgdt3303_dev = {
 	.demod_chip = LGDT3303,
 };
 
+static struct lgdt3305_config em2870_lgdt3304_dev = {
+	.i2c_addr           = 0x0e,
+	.demod_chip         = LGDT3304,
+	.spectral_inversion = 1,
+	.deny_i2c_rptr      = 1,
+	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
+	.vsb_if_khz         = 3250,
+	.qam_if_khz         = 4000,
+};
+
 static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -247,6 +261,17 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+static struct tda18271_std_map kworld_a340_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 0,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 1,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config kworld_a340_config = {
+	.std_map           = &kworld_a340_std_map,
+};
+
 static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -572,6 +597,14 @@ static int dvb_init(struct em28xx *dev)
 			}
 		}
 		break;
+	case EM2870_BOARD_KWORLD_A340:
+		dvb->frontend = dvb_attach(lgdt3305_attach,
+					   &em2870_lgdt3304_dev,
+					   &dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(tda18271_attach, dvb->frontend, 0x60,
+				   &dev->i2c_adap, &kworld_a340_config);
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 5c3fd9411b1..6759cd5570d 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -65,17 +65,14 @@ struct em28xx_ir_poll_result {
 struct em28xx_IR {
 	struct em28xx *dev;
 	struct input_dev *input;
-	struct ir_input_state ir;
 	char name[32];
 	char phys[32];
 
 	/* poll external decoder */
 	int polling;
 	struct delayed_work work;
-	unsigned int last_toggle:1;
 	unsigned int full_code:1;
 	unsigned int last_readcount;
-	unsigned int repeat_interval;
 
 	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
 
@@ -291,67 +288,39 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
 static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 {
 	int result;
-	int do_sendkey = 0;
 	struct em28xx_ir_poll_result poll_result;
 
 	/* read the registers containing the IR status */
 	result = ir->get_key(ir, &poll_result);
-	if (result < 0) {
+	if (unlikely(result < 0)) {
 		dprintk("ir->get_key() failed %d\n", result);
 		return;
 	}
 
-	dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x%02x\n",
-		poll_result.toggle_bit, poll_result.read_count,
-		ir->last_readcount, poll_result.rc_address,
-		poll_result.rc_data[0]);
-
-	if (ir->dev->chip_id == CHIP_ID_EM2874) {
-		/* The em2874 clears the readcount field every time the
-		   register is read.  The em2860/2880 datasheet says that it
-		   is supposed to clear the readcount, but it doesn't.  So with
-		   the em2874, we are looking for a non-zero read count as
-		   opposed to a readcount that is incrementing */
-		ir->last_readcount = 0;
-	}
-
-	if (poll_result.read_count == 0) {
-		/* The button has not been pressed since the last read */
-	} else if (ir->last_toggle != poll_result.toggle_bit) {
-		/* A button has been pressed */
-		dprintk("button has been pressed\n");
-		ir->last_toggle = poll_result.toggle_bit;
-		ir->repeat_interval = 0;
-		do_sendkey = 1;
-	} else if (poll_result.toggle_bit == ir->last_toggle &&
-		   poll_result.read_count > 0 &&
-		   poll_result.read_count != ir->last_readcount) {
-		/* The button is still being held down */
-		dprintk("button being held down\n");
-
-		/* Debouncer for first keypress */
-		if (ir->repeat_interval++ > 9) {
-			/* Start repeating after 1 second */
-			do_sendkey = 1;
-		}
-	}
-
-	if (do_sendkey) {
-		dprintk("sending keypress\n");
-
+	if (unlikely(poll_result.read_count != ir->last_readcount)) {
+		dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__,
+			poll_result.toggle_bit, poll_result.read_count,
+			poll_result.rc_address, poll_result.rc_data[0]);
 		if (ir->full_code)
-			ir_input_keydown(ir->input, &ir->ir,
-					 poll_result.rc_address << 8 |
-					 poll_result.rc_data[0]);
+			ir_keydown(ir->input,
+				   poll_result.rc_address << 8 |
+				   poll_result.rc_data[0],
+				   poll_result.toggle_bit);
 		else
-			ir_input_keydown(ir->input, &ir->ir,
-					 poll_result.rc_data[0]);
-
-		ir_input_nokey(ir->input, &ir->ir);
+			ir_keydown(ir->input,
+				   poll_result.rc_data[0],
+				   poll_result.toggle_bit);
+
+		if (ir->dev->chip_id == CHIP_ID_EM2874)
+			/* The em2874 clears the readcount field every time the
+			   register is read.  The em2860/2880 datasheet says that it
+			   is supposed to clear the readcount, but it doesn't.  So with
+			   the em2874, we are looking for a non-zero read count as
+			   opposed to a readcount that is incrementing */
+			ir->last_readcount = 0;
+		else
+			ir->last_readcount = poll_result.read_count;
 	}
-
-	ir->last_readcount = poll_result.read_count;
-	return;
 }
 
 static void em28xx_ir_work(struct work_struct *work)
@@ -466,11 +435,6 @@ int em28xx_ir_init(struct em28xx *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	/* Set IR protocol */
-	err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER);
-	if (err < 0)
-		goto err_out_free;
-
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_USB;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 20090e34173..7b9ec6e493e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -654,12 +654,12 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 		}
 
 		if (buf != NULL && dev->capture_type == 2) {
-			if (len > 4 && p[0] == 0x88 && p[1] == 0x88 &&
+			if (len >= 4 && p[0] == 0x88 && p[1] == 0x88 &&
 			    p[2] == 0x88 && p[3] == 0x88) {
 				p += 4;
 				len -= 4;
 			}
-			if (len > 4 && p[0] == 0x22 && p[1] == 0x5a) {
+			if (len >= 4 && p[0] == 0x22 && p[1] == 0x5a) {
 				em28xx_isocdbg("Video frame %d, len=%i, %s\n",
 					       p[2], len, (p[2] & 1) ?
 					       "odd" : "even");
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index b252d1b1b2a..1c61a6b65d2 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <media/ir-kbd-i2c.h>
+#include <media/ir-core.h>
 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
@@ -113,6 +114,7 @@
 #define EM2870_BOARD_REDDO_DVB_C_USB_BOX          73
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
+#define EM2870_BOARD_KWORLD_A340		  76
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
new file mode 100644
index 00000000000..8f1c94f7e00
--- /dev/null
+++ b/drivers/media/video/fsl-viu.c
@@ -0,0 +1,1632 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *  Freescale VIU video driver
+ *
+ *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ *	     Porting to 2.6.35 by DENX Software Engineering,
+ *	     Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf-dma-contig.h>
+
+#define DRV_NAME		"fsl_viu"
+#define VIU_MAJOR_VERSION	0
+#define VIU_MINOR_VERSION	5
+#define VIU_RELEASE		0
+#define VIU_VERSION		KERNEL_VERSION(VIU_MAJOR_VERSION, \
+					       VIU_MINOR_VERSION, \
+					       VIU_RELEASE)
+
+#define BUFFER_TIMEOUT		msecs_to_jiffies(500)  /* 0.5 seconds */
+
+#define	VIU_VID_MEM_LIMIT	4	/* Video memory limit, in Mb */
+
+/* I2C address of video decoder chip is 0x4A */
+#define VIU_VIDEO_DECODER_ADDR	0x25
+
+/* supported controls */
+static struct v4l2_queryctrl viu_qctrl[] = {
+	{
+		.id            = V4L2_CID_BRIGHTNESS,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Brightness",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 1,
+		.default_value = 127,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_CONTRAST,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Contrast",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 0x1,
+		.default_value = 0x10,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_SATURATION,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Saturation",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 0x1,
+		.default_value = 127,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_HUE,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Hue",
+		.minimum       = -128,
+		.maximum       = 127,
+		.step          = 0x1,
+		.default_value = 0,
+		.flags         = 0,
+	}
+};
+
+static int qctl_regs[ARRAY_SIZE(viu_qctrl)];
+
+static int info_level;
+
+#define dprintk(level, fmt, arg...)					\
+	do {								\
+		if (level <= info_level)				\
+			printk(KERN_DEBUG "viu: " fmt , ## arg);	\
+	} while (0)
+
+/*
+ * Basic structures
+ */
+struct viu_fmt {
+	char  name[32];
+	u32   fourcc;		/* v4l2 format id */
+	u32   pixelformat;
+	int   depth;
+};
+
+static struct viu_fmt formats[] = {
+	{
+		.name		= "RGB-16 (5/B-6/G-5/R)",
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.pixelformat	= V4L2_PIX_FMT_RGB565,
+		.depth		= 16,
+	}, {
+		.name		= "RGB-32 (A-R-G-B)",
+		.fourcc		= V4L2_PIX_FMT_RGB32,
+		.pixelformat	= V4L2_PIX_FMT_RGB32,
+		.depth		= 32,
+	}
+};
+
+struct viu_dev;
+struct viu_buf;
+
+/* buffer for one video frame */
+struct viu_buf {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+	struct viu_fmt *fmt;
+};
+
+struct viu_dmaqueue {
+	struct viu_dev		*dev;
+	struct list_head	active;
+	struct list_head	queued;
+	struct timer_list	timeout;
+};
+
+struct viu_status {
+	u32 field_irq;
+	u32 vsync_irq;
+	u32 hsync_irq;
+	u32 vstart_irq;
+	u32 dma_end_irq;
+	u32 error_irq;
+};
+
+struct viu_reg {
+	u32 status_cfg;
+	u32 luminance;
+	u32 chroma_r;
+	u32 chroma_g;
+	u32 chroma_b;
+	u32 field_base_addr;
+	u32 dma_inc;
+	u32 picture_count;
+	u32 req_alarm;
+	u32 alpha;
+} __attribute__ ((packed));
+
+struct viu_dev {
+	struct v4l2_device	v4l2_dev;
+	struct mutex		lock;
+	spinlock_t		slock;
+	int			users;
+
+	struct device		*dev;
+	/* various device info */
+	struct video_device	*vdev;
+	struct viu_dmaqueue	vidq;
+	enum v4l2_field		capfield;
+	int			field;
+	int			first;
+	int			dma_done;
+
+	/* Hardware register area */
+	struct viu_reg		*vr;
+
+	/* Interrupt vector */
+	int			irq;
+	struct viu_status	irqs;
+
+	/* video overlay */
+	struct v4l2_framebuffer	ovbuf;
+	struct viu_fmt		*ovfmt;
+	unsigned int		ovenable;
+	enum v4l2_field		ovfield;
+
+	/* crop */
+	struct v4l2_rect	crop_current;
+
+	/* clock pointer */
+	struct clk		*clk;
+
+	/* decoder */
+	struct v4l2_subdev	*decoder;
+};
+
+struct viu_fh {
+	struct viu_dev		*dev;
+
+	/* video capture */
+	struct videobuf_queue	vb_vidq;
+	spinlock_t		vbq_lock; /* spinlock for the videobuf queue */
+
+	/* video overlay */
+	struct v4l2_window	win;
+	struct v4l2_clip	clips[1];
+
+	/* video capture */
+	struct viu_fmt		*fmt;
+	int			width, height, sizeimage;
+	enum v4l2_buf_type	type;
+};
+
+static struct viu_reg reg_val;
+
+/*
+ * Macro definitions of VIU registers
+ */
+
+/* STATUS_CONFIG register */
+enum status_config {
+	SOFT_RST		= 1 << 0,
+
+	ERR_MASK		= 0x0f << 4,	/* Error code mask */
+	ERR_NO			= 0x00,		/* No error */
+	ERR_DMA_V		= 0x01 << 4,	/* DMA in vertical active */
+	ERR_DMA_VB		= 0x02 << 4,	/* DMA in vertical blanking */
+	ERR_LINE_TOO_LONG	= 0x04 << 4,	/* Line too long */
+	ERR_TOO_MANG_LINES	= 0x05 << 4,	/* Too many lines in field */
+	ERR_LINE_TOO_SHORT	= 0x06 << 4,	/* Line too short */
+	ERR_NOT_ENOUGH_LINE	= 0x07 << 4,	/* Not enough lines in field */
+	ERR_FIFO_OVERFLOW	= 0x08 << 4,	/* FIFO overflow */
+	ERR_FIFO_UNDERFLOW	= 0x09 << 4,	/* FIFO underflow */
+	ERR_1bit_ECC		= 0x0a << 4,	/* One bit ECC error */
+	ERR_MORE_ECC		= 0x0b << 4,	/* Two/more bits ECC error */
+
+	INT_FIELD_EN		= 0x01 << 8,	/* Enable field interrupt */
+	INT_VSYNC_EN		= 0x01 << 9,	/* Enable vsync interrupt */
+	INT_HSYNC_EN		= 0x01 << 10,	/* Enable hsync interrupt */
+	INT_VSTART_EN		= 0x01 << 11,	/* Enable vstart interrupt */
+	INT_DMA_END_EN		= 0x01 << 12,	/* Enable DMA end interrupt */
+	INT_ERROR_EN		= 0x01 << 13,	/* Enable error interrupt */
+	INT_ECC_EN		= 0x01 << 14,	/* Enable ECC interrupt */
+
+	INT_FIELD_STATUS	= 0x01 << 16,	/* field interrupt status */
+	INT_VSYNC_STATUS	= 0x01 << 17,	/* vsync interrupt status */
+	INT_HSYNC_STATUS	= 0x01 << 18,	/* hsync interrupt status */
+	INT_VSTART_STATUS	= 0x01 << 19,	/* vstart interrupt status */
+	INT_DMA_END_STATUS	= 0x01 << 20,	/* DMA end interrupt status */
+	INT_ERROR_STATUS	= 0x01 << 21,	/* error interrupt status */
+
+	DMA_ACT			= 0x01 << 27,	/* Enable DMA transfer */
+	FIELD_NO		= 0x01 << 28,	/* Field number */
+	DITHER_ON		= 0x01 << 29,	/* Dithering is on */
+	ROUND_ON		= 0x01 << 30,	/* Round is on */
+	MODE_32BIT		= 0x01 << 31,	/* Data in RGBa888,
+						 * 0 in RGB565
+						 */
+};
+
+#define norm_maxw()	720
+#define norm_maxh()	576
+
+#define INT_ALL_STATUS	(INT_FIELD_STATUS | INT_VSYNC_STATUS | \
+			 INT_HSYNC_STATUS | INT_VSTART_STATUS | \
+			 INT_DMA_END_STATUS | INT_ERROR_STATUS)
+
+#define NUM_FORMATS	ARRAY_SIZE(formats)
+
+static irqreturn_t viu_intr(int irq, void *dev_id);
+
+struct viu_fmt *format_by_fourcc(int fourcc)
+{
+	int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].pixelformat == fourcc)
+			return formats + i;
+	}
+
+	dprintk(0, "unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
+	return NULL;
+}
+
+void viu_start_dma(struct viu_dev *dev)
+{
+	struct viu_reg *vr = dev->vr;
+
+	dev->field = 0;
+
+	/* Enable DMA operation */
+	out_be32(&vr->status_cfg, SOFT_RST);
+	out_be32(&vr->status_cfg, INT_FIELD_EN);
+}
+
+void viu_stop_dma(struct viu_dev *dev)
+{
+	struct viu_reg *vr = dev->vr;
+	int cnt = 100;
+	u32 status_cfg;
+
+	out_be32(&vr->status_cfg, 0);
+
+	/* Clear pending interrupts */
+	status_cfg = in_be32(&vr->status_cfg);
+	if (status_cfg & 0x3f0000)
+		out_be32(&vr->status_cfg, status_cfg & 0x3f0000);
+
+	if (status_cfg & DMA_ACT) {
+		do {
+			status_cfg = in_be32(&vr->status_cfg);
+			if (status_cfg & INT_DMA_END_STATUS)
+				break;
+		} while (cnt--);
+
+		if (cnt < 0) {
+			/* timed out, issue soft reset */
+			out_be32(&vr->status_cfg, SOFT_RST);
+			out_be32(&vr->status_cfg, 0);
+		} else {
+			/* clear DMA_END and other pending irqs */
+			out_be32(&vr->status_cfg, status_cfg & 0x3f0000);
+		}
+	}
+
+	dev->field = 0;
+}
+
+static int restart_video_queue(struct viu_dmaqueue *vidq)
+{
+	struct viu_buf *buf, *prev;
+
+	dprintk(1, "%s vidq=0x%08lx\n", __func__, (unsigned long)vidq);
+	if (!list_empty(&vidq->active)) {
+		buf = list_entry(vidq->active.next, struct viu_buf, vb.queue);
+		dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+			buf, buf->vb.i);
+
+		viu_stop_dma(vidq->dev);
+
+		/* cancel all outstanding capture requests */
+		list_for_each_entry_safe(buf, prev, &vidq->active, vb.queue) {
+			list_del(&buf->vb.queue);
+			buf->vb.state = VIDEOBUF_ERROR;
+			wake_up(&buf->vb.done);
+		}
+		mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT);
+		return 0;
+	}
+
+	prev = NULL;
+	for (;;) {
+		if (list_empty(&vidq->queued))
+			return 0;
+		buf = list_entry(vidq->queued.next, struct viu_buf, vb.queue);
+		if (prev == NULL) {
+			list_del(&buf->vb.queue);
+			list_add_tail(&buf->vb.queue, &vidq->active);
+
+			dprintk(1, "Restarting video dma\n");
+			viu_stop_dma(vidq->dev);
+			viu_start_dma(vidq->dev);
+
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT);
+			dprintk(2, "[%p/%d] restart_queue - first active\n",
+				buf, buf->vb.i);
+
+		} else if (prev->vb.width  == buf->vb.width  &&
+			   prev->vb.height == buf->vb.height &&
+			   prev->fmt       == buf->fmt) {
+			list_del(&buf->vb.queue);
+			list_add_tail(&buf->vb.queue, &vidq->active);
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			dprintk(2, "[%p/%d] restart_queue - move to active\n",
+				buf, buf->vb.i);
+		} else {
+			return 0;
+		}
+		prev = buf;
+	}
+}
+
+static void viu_vid_timeout(unsigned long data)
+{
+	struct viu_dev *dev = (struct viu_dev *)data;
+	struct viu_buf *buf;
+	struct viu_dmaqueue *vidq = &dev->vidq;
+
+	while (!list_empty(&vidq->active)) {
+		buf = list_entry(vidq->active.next, struct viu_buf, vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = VIDEOBUF_ERROR;
+		wake_up(&buf->vb.done);
+		dprintk(1, "viu/0: [%p/%d] timeout\n", buf, buf->vb.i);
+	}
+
+	restart_video_queue(vidq);
+}
+
+/*
+ * Videobuf operations
+ */
+static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
+			unsigned int *size)
+{
+	struct viu_fh *fh = vq->priv_data;
+
+	*size = fh->width * fh->height * fh->fmt->depth >> 3;
+	if (*count == 0)
+		*count = 32;
+
+	while (*size * *count > VIU_VID_MEM_LIMIT * 1024 * 1024)
+		(*count)--;
+
+	dprintk(1, "%s, count=%d, size=%d\n", __func__, *count, *size);
+	return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct viu_buf *buf)
+{
+	struct videobuf_buffer *vb = &buf->vb;
+	void *vaddr = NULL;
+
+	BUG_ON(in_interrupt());
+
+	videobuf_waiton(&buf->vb, 0, 0);
+
+	if (vq->int_ops && vq->int_ops->vaddr)
+		vaddr = vq->int_ops->vaddr(vb);
+
+	if (vaddr)
+		videobuf_dma_contig_free(vq, &buf->vb);
+
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+inline int buffer_activate(struct viu_dev *dev, struct viu_buf *buf)
+{
+	struct viu_reg *vr = dev->vr;
+	int bpp;
+
+	/* setup the DMA base address */
+	reg_val.field_base_addr = videobuf_to_dma_contig(&buf->vb);
+
+	dprintk(1, "buffer_activate [%p/%d]: dma addr 0x%lx\n",
+		buf, buf->vb.i, (unsigned long)reg_val.field_base_addr);
+
+	/* interlace is on by default, set horizontal DMA increment */
+	reg_val.status_cfg = 0;
+	bpp = buf->fmt->depth >> 3;
+	switch (bpp) {
+	case 2:
+		reg_val.status_cfg &= ~MODE_32BIT;
+		reg_val.dma_inc = buf->vb.width * 2;
+		break;
+	case 4:
+		reg_val.status_cfg |= MODE_32BIT;
+		reg_val.dma_inc = buf->vb.width * 4;
+		break;
+	default:
+		dprintk(0, "doesn't support color depth(%d)\n",
+			bpp * 8);
+		return -EINVAL;
+	}
+
+	/* setup picture_count register */
+	reg_val.picture_count = (buf->vb.height / 2) << 16 |
+				buf->vb.width;
+
+	reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN;
+
+	buf->vb.state = VIDEOBUF_ACTIVE;
+	dev->capfield = buf->vb.field;
+
+	/* reset dma increment if needed */
+	if (!V4L2_FIELD_HAS_BOTH(buf->vb.field))
+		reg_val.dma_inc = 0;
+
+	out_be32(&vr->dma_inc, reg_val.dma_inc);
+	out_be32(&vr->picture_count, reg_val.picture_count);
+	out_be32(&vr->field_base_addr, reg_val.field_base_addr);
+	mod_timer(&dev->vidq.timeout, jiffies + BUFFER_TIMEOUT);
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *vq,
+			  struct videobuf_buffer *vb,
+			  enum v4l2_field field)
+{
+	struct viu_fh  *fh  = vq->priv_data;
+	struct viu_buf *buf = container_of(vb, struct viu_buf, vb);
+	int rc;
+
+	BUG_ON(fh->fmt == NULL);
+
+	if (fh->width  < 48 || fh->width  > norm_maxw() ||
+	    fh->height < 32 || fh->height > norm_maxh())
+		return -EINVAL;
+	buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3;
+	if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	if (buf->fmt       != fh->fmt	 ||
+	    buf->vb.width  != fh->width  ||
+	    buf->vb.height != fh->height ||
+	    buf->vb.field  != field) {
+		buf->fmt       = fh->fmt;
+		buf->vb.width  = fh->width;
+		buf->vb.height = fh->height;
+		buf->vb.field  = field;
+	}
+
+	if (buf->vb.state == VIDEOBUF_NEEDS_INIT) {
+		rc = videobuf_iolock(vq, &buf->vb, NULL);
+		if (rc != 0)
+			goto fail;
+
+		buf->vb.width  = fh->width;
+		buf->vb.height = fh->height;
+		buf->vb.field  = field;
+		buf->fmt       = fh->fmt;
+	}
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	free_buffer(vq, buf);
+	return rc;
+}
+
+static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct viu_buf       *buf     = container_of(vb, struct viu_buf, vb);
+	struct viu_fh        *fh      = vq->priv_data;
+	struct viu_dev       *dev     = fh->dev;
+	struct viu_dmaqueue  *vidq    = &dev->vidq;
+	struct viu_buf       *prev;
+
+	if (!list_empty(&vidq->queued)) {
+		dprintk(1, "adding vb queue=0x%08lx\n",
+				(unsigned long)&buf->vb.queue);
+		dprintk(1, "vidq pointer 0x%p, queued 0x%p\n",
+				vidq, &vidq->queued);
+		dprintk(1, "dev %p, queued: self %p, next %p, head %p\n",
+			dev, &vidq->queued, vidq->queued.next,
+			vidq->queued.prev);
+		list_add_tail(&buf->vb.queue, &vidq->queued);
+		buf->vb.state = VIDEOBUF_QUEUED;
+		dprintk(2, "[%p/%d] buffer_queue - append to queued\n",
+			buf, buf->vb.i);
+	} else if (list_empty(&vidq->active)) {
+		dprintk(1, "adding vb active=0x%08lx\n",
+				(unsigned long)&buf->vb.queue);
+		list_add_tail(&buf->vb.queue, &vidq->active);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT);
+		dprintk(2, "[%p/%d] buffer_queue - first active\n",
+			buf, buf->vb.i);
+
+		buffer_activate(dev, buf);
+	} else {
+		dprintk(1, "adding vb queue2=0x%08lx\n",
+				(unsigned long)&buf->vb.queue);
+		prev = list_entry(vidq->active.prev, struct viu_buf, vb.queue);
+		if (prev->vb.width  == buf->vb.width  &&
+		    prev->vb.height == buf->vb.height &&
+		    prev->fmt       == buf->fmt) {
+			list_add_tail(&buf->vb.queue, &vidq->active);
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+				buf, buf->vb.i);
+		} else {
+			list_add_tail(&buf->vb.queue, &vidq->queued);
+			buf->vb.state = VIDEOBUF_QUEUED;
+			dprintk(2, "[%p/%d] buffer_queue - first queued\n",
+				buf, buf->vb.i);
+		}
+	}
+}
+
+static void buffer_release(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	struct viu_buf *buf  = container_of(vb, struct viu_buf, vb);
+	struct viu_fh  *fh   = vq->priv_data;
+	struct viu_dev *dev  = (struct viu_dev *)fh->dev;
+
+	viu_stop_dma(dev);
+	free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops viu_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+};
+
+/*
+ * IOCTL vidioc handling
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "viu");
+	strcpy(cap->card, "viu");
+	cap->version = VIU_VERSION;
+	cap->capabilities =	V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_STREAMING     |
+				V4L2_CAP_VIDEO_OVERLAY |
+				V4L2_CAP_READWRITE;
+	return 0;
+}
+
+static int vidioc_enum_fmt(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	int index = f->index;
+
+	if (f->index > NUM_FORMATS)
+		return -EINVAL;
+
+	strlcpy(f->description, formats[index].name, sizeof(f->description));
+	f->pixelformat = formats[index].fourcc;
+	return 0;
+}
+
+static int vidioc_g_fmt_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct viu_fh *fh = priv;
+
+	f->fmt.pix.width        = fh->width;
+	f->fmt.pix.height       = fh->height;
+	f->fmt.pix.field        = fh->vb_vidq.field;
+	f->fmt.pix.pixelformat  = fh->fmt->pixelformat;
+	f->fmt.pix.bytesperline =
+			(f->fmt.pix.width * fh->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage	= fh->sizeimage;
+	return 0;
+}
+
+static int vidioc_try_fmt_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct viu_fmt *fmt;
+	enum v4l2_field field;
+	unsigned int maxw, maxh;
+
+	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	if (!fmt) {
+		dprintk(1, "Fourcc format (0x%08x) invalid.",
+			f->fmt.pix.pixelformat);
+		return -EINVAL;
+	}
+
+	field = f->fmt.pix.field;
+
+	if (field == V4L2_FIELD_ANY) {
+		field = V4L2_FIELD_INTERLACED;
+	} else if (field != V4L2_FIELD_INTERLACED) {
+		dprintk(1, "Field type invalid.\n");
+		return -EINVAL;
+	}
+
+	maxw  = norm_maxw();
+	maxh  = norm_maxh();
+
+	f->fmt.pix.field = field;
+	if (f->fmt.pix.height < 32)
+		f->fmt.pix.height = 32;
+	if (f->fmt.pix.height > maxh)
+		f->fmt.pix.height = maxh;
+	if (f->fmt.pix.width < 48)
+		f->fmt.pix.width = 48;
+	if (f->fmt.pix.width > maxw)
+		f->fmt.pix.width = maxw;
+	f->fmt.pix.width &= ~0x03;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct viu_fh *fh = priv;
+	int ret;
+
+	ret = vidioc_try_fmt_cap(file, fh, f);
+	if (ret < 0)
+		return ret;
+
+	fh->fmt           = format_by_fourcc(f->fmt.pix.pixelformat);
+	fh->width         = f->fmt.pix.width;
+	fh->height        = f->fmt.pix.height;
+	fh->sizeimage     = f->fmt.pix.sizeimage;
+	fh->vb_vidq.field = f->fmt.pix.field;
+	fh->type          = f->type;
+	dprintk(1, "set to pixelformat '%4.6s'\n", (char *)&fh->fmt->name);
+	return 0;
+}
+
+static int vidioc_g_fmt_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct viu_fh *fh = priv;
+
+	f->fmt.win = fh->win;
+	return 0;
+}
+
+static int verify_preview(struct viu_dev *dev, struct v4l2_window *win)
+{
+	enum v4l2_field field;
+	int maxw, maxh;
+
+	if (dev->ovbuf.base == NULL)
+		return -EINVAL;
+	if (dev->ovfmt == NULL)
+		return -EINVAL;
+	if (win->w.width < 48 || win->w.height < 32)
+		return -EINVAL;
+
+	field = win->field;
+	maxw  = dev->crop_current.width;
+	maxh  = dev->crop_current.height;
+
+	if (field == V4L2_FIELD_ANY) {
+		field = (win->w.height > maxh/2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_TOP;
+	}
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	win->field = field;
+	if (win->w.width > maxw)
+		win->w.width = maxw;
+	if (win->w.height > maxh)
+		win->w.height = maxh;
+	return 0;
+}
+
+inline void viu_activate_overlay(struct viu_reg *viu_reg)
+{
+	struct viu_reg *vr = viu_reg;
+
+	out_be32(&vr->field_base_addr, reg_val.field_base_addr);
+	out_be32(&vr->dma_inc, reg_val.dma_inc);
+	out_be32(&vr->picture_count, reg_val.picture_count);
+}
+
+static int viu_start_preview(struct viu_dev *dev, struct viu_fh *fh)
+{
+	int bpp;
+
+	dprintk(1, "%s %dx%d %s\n", __func__,
+		fh->win.w.width, fh->win.w.height, dev->ovfmt->name);
+
+	reg_val.status_cfg = 0;
+
+	/* setup window */
+	reg_val.picture_count = (fh->win.w.height / 2) << 16 |
+				fh->win.w.width;
+
+	/* setup color depth and dma increment */
+	bpp = dev->ovfmt->depth / 8;
+	switch (bpp) {
+	case 2:
+		reg_val.status_cfg &= ~MODE_32BIT;
+		reg_val.dma_inc = fh->win.w.width * 2;
+		break;
+	case 4:
+		reg_val.status_cfg |= MODE_32BIT;
+		reg_val.dma_inc = fh->win.w.width * 4;
+		break;
+	default:
+		dprintk(0, "device doesn't support color depth(%d)\n",
+			bpp * 8);
+		return -EINVAL;
+	}
+
+	dev->ovfield = fh->win.field;
+	if (!V4L2_FIELD_HAS_BOTH(dev->ovfield))
+		reg_val.dma_inc = 0;
+
+	reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN;
+
+	/* setup the base address of the overlay buffer */
+	reg_val.field_base_addr = (u32)dev->ovbuf.base;
+
+	dev->ovenable = 1;
+	viu_activate_overlay(dev->vr);
+
+	/* start dma */
+	viu_start_dma(dev);
+	return 0;
+}
+
+static int vidioc_s_fmt_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct viu_fh  *fh  = priv;
+	struct viu_dev *dev = (struct viu_dev *)fh->dev;
+	unsigned long  flags;
+	int err;
+
+	err = verify_preview(dev, &f->fmt.win);
+	if (err)
+		return err;
+
+	mutex_lock(&dev->lock);
+	fh->win = f->fmt.win;
+
+	spin_lock_irqsave(&dev->slock, flags);
+	viu_start_preview(dev, fh);
+	spin_unlock_irqrestore(&dev->slock, flags);
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+static int vidioc_try_fmt_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	return 0;
+}
+
+int vidioc_g_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg)
+{
+	struct viu_fh  *fh = priv;
+	struct viu_dev *dev = fh->dev;
+	struct v4l2_framebuffer *fb = arg;
+
+	*fb = dev->ovbuf;
+	fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+	return 0;
+}
+
+int vidioc_s_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg)
+{
+	struct viu_fh  *fh = priv;
+	struct viu_dev *dev = fh->dev;
+	struct v4l2_framebuffer *fb = arg;
+	struct viu_fmt *fmt;
+
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	/* check args */
+	fmt = format_by_fourcc(fb->fmt.pixelformat);
+	if (fmt == NULL)
+		return -EINVAL;
+
+	/* ok, accept it */
+	dev->ovbuf = *fb;
+	dev->ovfmt = fmt;
+	if (dev->ovbuf.fmt.bytesperline == 0) {
+		dev->ovbuf.fmt.bytesperline =
+			dev->ovbuf.fmt.width * fmt->depth / 8;
+	}
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+				struct v4l2_requestbuffers *p)
+{
+	struct viu_fh *fh = priv;
+
+	return videobuf_reqbufs(&fh->vb_vidq, p);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+					struct v4l2_buffer *p)
+{
+	struct viu_fh *fh = priv;
+
+	return videobuf_querybuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct viu_fh *fh = priv;
+
+	return videobuf_qbuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct viu_fh *fh = priv;
+
+	return videobuf_dqbuf(&fh->vb_vidq, p,
+				file->f_flags & O_NONBLOCK);
+}
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct viu_fh *fh = priv;
+
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (fh->type != i)
+		return -EINVAL;
+
+	return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct viu_fh  *fh = priv;
+
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (fh->type != i)
+		return -EINVAL;
+
+	return videobuf_streamoff(&fh->vb_vidq);
+}
+
+#define decoder_call(viu, o, f, args...) \
+	v4l2_subdev_call(viu->decoder, o, f, ##args)
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct viu_fh *fh = priv;
+
+	decoder_call(fh->dev, core, s_std, *id);
+	return 0;
+}
+
+/* only one input in this driver */
+static int vidioc_enum_input(struct file *file, void *priv,
+					struct v4l2_input *inp)
+{
+	struct viu_fh *fh = priv;
+
+	if (inp->index != 0)
+		return -EINVAL;
+
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	inp->std = fh->dev->vdev->tvnorms;
+	strcpy(inp->name, "Camera");
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct viu_fh *fh = priv;
+
+	if (i > 1)
+		return -EINVAL;
+
+	decoder_call(fh->dev, video, s_routing, i, 0, 0);
+	return 0;
+}
+
+/* Controls */
+static int vidioc_queryctrl(struct file *file, void *priv,
+				struct v4l2_queryctrl *qc)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) {
+		if (qc->id && qc->id == viu_qctrl[i].id) {
+			memcpy(qc, &(viu_qctrl[i]), sizeof(*qc));
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctrl)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) {
+		if (ctrl->id == viu_qctrl[i].id) {
+			ctrl->value = qctl_regs[i];
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+static int vidioc_s_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctrl)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) {
+		if (ctrl->id == viu_qctrl[i].id) {
+			if (ctrl->value < viu_qctrl[i].minimum
+				|| ctrl->value > viu_qctrl[i].maximum)
+					return -ERANGE;
+			qctl_regs[i] = ctrl->value;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+inline void viu_activate_next_buf(struct viu_dev *dev,
+				struct viu_dmaqueue *viuq)
+{
+	struct viu_dmaqueue *vidq = viuq;
+	struct viu_buf *buf;
+
+	/* launch another DMA operation for an active/queued buffer */
+	if (!list_empty(&vidq->active)) {
+		buf = list_entry(vidq->active.next, struct viu_buf,
+					vb.queue);
+		dprintk(1, "start another queued buffer: 0x%p\n", buf);
+		buffer_activate(dev, buf);
+	} else if (!list_empty(&vidq->queued)) {
+		buf = list_entry(vidq->queued.next, struct viu_buf,
+					vb.queue);
+		list_del(&buf->vb.queue);
+
+		dprintk(1, "start another queued buffer: 0x%p\n", buf);
+		list_add_tail(&buf->vb.queue, &vidq->active);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buffer_activate(dev, buf);
+	}
+}
+
+inline void viu_default_settings(struct viu_reg *viu_reg)
+{
+	struct viu_reg *vr = viu_reg;
+
+	out_be32(&vr->luminance, 0x9512A254);
+	out_be32(&vr->chroma_r, 0x03310000);
+	out_be32(&vr->chroma_g, 0x06600F38);
+	out_be32(&vr->chroma_b, 0x00000409);
+	out_be32(&vr->alpha, 0x000000ff);
+	out_be32(&vr->req_alarm, 0x00000090);
+	dprintk(1, "status reg: 0x%08x, field base: 0x%08x\n",
+		in_be32(&vr->status_cfg), in_be32(&vr->field_base_addr));
+}
+
+static void viu_overlay_intr(struct viu_dev *dev, u32 status)
+{
+	struct viu_reg *vr = dev->vr;
+
+	if (status & INT_DMA_END_STATUS)
+		dev->dma_done = 1;
+
+	if (status & INT_FIELD_STATUS) {
+		if (dev->dma_done) {
+			u32 addr = reg_val.field_base_addr;
+
+			dev->dma_done = 0;
+			if (status & FIELD_NO)
+				addr += reg_val.dma_inc;
+
+			out_be32(&vr->field_base_addr, addr);
+			out_be32(&vr->dma_inc, reg_val.dma_inc);
+			out_be32(&vr->status_cfg,
+				 (status & 0xffc0ffff) |
+				 (status & INT_ALL_STATUS) |
+				 reg_val.status_cfg);
+		} else if (status & INT_VSYNC_STATUS) {
+			out_be32(&vr->status_cfg,
+				 (status & 0xffc0ffff) |
+				 (status & INT_ALL_STATUS) |
+				 reg_val.status_cfg);
+		}
+	}
+}
+
+static void viu_capture_intr(struct viu_dev *dev, u32 status)
+{
+	struct viu_dmaqueue *vidq = &dev->vidq;
+	struct viu_reg *vr = dev->vr;
+	struct viu_buf *buf;
+	int field_num;
+	int need_two;
+	int dma_done = 0;
+
+	field_num = status & FIELD_NO;
+	need_two = V4L2_FIELD_HAS_BOTH(dev->capfield);
+
+	if (status & INT_DMA_END_STATUS) {
+		dma_done = 1;
+		if (((field_num == 0) && (dev->field == 0)) ||
+		    (field_num && (dev->field == 1)))
+			dev->field++;
+	}
+
+	if (status & INT_FIELD_STATUS) {
+		dprintk(1, "irq: field %d, done %d\n",
+			!!field_num, dma_done);
+		if (unlikely(dev->first)) {
+			if (field_num == 0) {
+				dev->first = 0;
+				dprintk(1, "activate first buf\n");
+				viu_activate_next_buf(dev, vidq);
+			} else
+				dprintk(1, "wait field 0\n");
+			return;
+		}
+
+		/* setup buffer address for next dma operation */
+		if (!list_empty(&vidq->active)) {
+			u32 addr = reg_val.field_base_addr;
+
+			if (field_num && need_two) {
+				addr += reg_val.dma_inc;
+				dprintk(1, "field 1, 0x%lx, dev field %d\n",
+					(unsigned long)addr, dev->field);
+			}
+			out_be32(&vr->field_base_addr, addr);
+			out_be32(&vr->dma_inc, reg_val.dma_inc);
+			out_be32(&vr->status_cfg,
+				 (status & 0xffc0ffff) |
+				 (status & INT_ALL_STATUS) |
+				 reg_val.status_cfg);
+			return;
+		}
+	}
+
+	if (dma_done && field_num && (dev->field == 2)) {
+		dev->field = 0;
+		buf = list_entry(vidq->active.next,
+				 struct viu_buf, vb.queue);
+		dprintk(1, "viu/0: [%p/%d] 0x%lx/0x%lx: dma complete\n",
+			buf, buf->vb.i,
+			(unsigned long)videobuf_to_dma_contig(&buf->vb),
+			(unsigned long)in_be32(&vr->field_base_addr));
+
+		if (waitqueue_active(&buf->vb.done)) {
+			list_del(&buf->vb.queue);
+			do_gettimeofday(&buf->vb.ts);
+			buf->vb.state = VIDEOBUF_DONE;
+			buf->vb.field_count++;
+			wake_up(&buf->vb.done);
+		}
+		/* activate next dma buffer */
+		viu_activate_next_buf(dev, vidq);
+	}
+}
+
+static irqreturn_t viu_intr(int irq, void *dev_id)
+{
+	struct viu_dev *dev  = (struct viu_dev *)dev_id;
+	struct viu_reg *vr = dev->vr;
+	u32 status;
+	u32 error;
+
+	status = in_be32(&vr->status_cfg);
+
+	if (status & INT_ERROR_STATUS) {
+		dev->irqs.error_irq++;
+		error = status & ERR_MASK;
+		if (error)
+			dprintk(1, "Err: error(%d), times:%d!\n",
+				error >> 4, dev->irqs.error_irq);
+		/* Clear interrupt error bit and error flags */
+		out_be32(&vr->status_cfg,
+			 (status & 0xffc0ffff) | INT_ERROR_STATUS);
+	}
+
+	if (status & INT_DMA_END_STATUS) {
+		dev->irqs.dma_end_irq++;
+		dev->dma_done = 1;
+		dprintk(2, "VIU DMA end interrupt times: %d\n",
+					dev->irqs.dma_end_irq);
+	}
+
+	if (status & INT_HSYNC_STATUS)
+		dev->irqs.hsync_irq++;
+
+	if (status & INT_FIELD_STATUS) {
+		dev->irqs.field_irq++;
+		dprintk(2, "VIU field interrupt times: %d\n",
+					dev->irqs.field_irq);
+	}
+
+	if (status & INT_VSTART_STATUS)
+		dev->irqs.vstart_irq++;
+
+	if (status & INT_VSYNC_STATUS) {
+		dev->irqs.vsync_irq++;
+		dprintk(2, "VIU vsync interrupt times: %d\n",
+			dev->irqs.vsync_irq);
+	}
+
+	/* clear all pending irqs */
+	status = in_be32(&vr->status_cfg);
+	out_be32(&vr->status_cfg,
+		 (status & 0xffc0ffff) | (status & INT_ALL_STATUS));
+
+	if (dev->ovenable) {
+		viu_overlay_intr(dev, status);
+		return IRQ_HANDLED;
+	}
+
+	/* Capture mode */
+	viu_capture_intr(dev, status);
+	return IRQ_HANDLED;
+}
+
+/*
+ * File operations for the device
+ */
+static int viu_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct viu_dev *dev = video_get_drvdata(vdev);
+	struct viu_fh *fh;
+	struct viu_reg *vr;
+	int minor = vdev->minor;
+	u32 status_cfg;
+	int i;
+
+	dprintk(1, "viu: open (minor=%d)\n", minor);
+
+	dev->users++;
+	if (dev->users > 1) {
+		dev->users--;
+		return -EBUSY;
+	}
+
+	vr = dev->vr;
+
+	dprintk(1, "open minor=%d type=%s users=%d\n", minor,
+		v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users);
+
+	/* allocate and initialize per filehandle data */
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (!fh) {
+		dev->users--;
+		return -ENOMEM;
+	}
+
+	file->private_data = fh;
+	fh->dev = dev;
+
+	fh->type     = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	fh->fmt      = format_by_fourcc(V4L2_PIX_FMT_RGB32);
+	fh->width    = norm_maxw();
+	fh->height   = norm_maxh();
+	dev->crop_current.width  = fh->width;
+	dev->crop_current.height = fh->height;
+
+	/* Put all controls at a sane state */
+	for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++)
+		qctl_regs[i] = viu_qctrl[i].default_value;
+
+	dprintk(1, "Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n",
+		(unsigned long)fh, (unsigned long)dev,
+		(unsigned long)&dev->vidq);
+	dprintk(1, "Open: list_empty queued=%d\n",
+		list_empty(&dev->vidq.queued));
+	dprintk(1, "Open: list_empty active=%d\n",
+		list_empty(&dev->vidq.active));
+
+	viu_default_settings(vr);
+
+	status_cfg = in_be32(&vr->status_cfg);
+	out_be32(&vr->status_cfg,
+		 status_cfg & ~(INT_VSYNC_EN | INT_HSYNC_EN |
+				INT_FIELD_EN | INT_VSTART_EN |
+				INT_DMA_END_EN | INT_ERROR_EN | INT_ECC_EN));
+
+	status_cfg = in_be32(&vr->status_cfg);
+	out_be32(&vr->status_cfg, status_cfg | INT_ALL_STATUS);
+
+	spin_lock_init(&fh->vbq_lock);
+	videobuf_queue_dma_contig_init(&fh->vb_vidq, &viu_video_qops,
+				       dev->dev, &fh->vbq_lock,
+				       fh->type, V4L2_FIELD_INTERLACED,
+				       sizeof(struct viu_buf), fh);
+	return 0;
+}
+
+static ssize_t viu_read(struct file *file, char __user *data, size_t count,
+			loff_t *ppos)
+{
+	struct viu_fh *fh = file->private_data;
+	struct viu_dev *dev = fh->dev;
+	int ret = 0;
+
+	dprintk(2, "%s\n", __func__);
+	if (dev->ovenable)
+		dev->ovenable = 0;
+
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		viu_start_dma(dev);
+		ret = videobuf_read_stream(&fh->vb_vidq, data, count,
+				ppos, 0, file->f_flags & O_NONBLOCK);
+		return ret;
+	}
+	return 0;
+}
+
+static unsigned int viu_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct viu_fh *fh = file->private_data;
+	struct videobuf_queue *q = &fh->vb_vidq;
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+		return POLLERR;
+
+	return videobuf_poll_stream(file, q, wait);
+}
+
+static int viu_release(struct file *file)
+{
+	struct viu_fh *fh = file->private_data;
+	struct viu_dev *dev = fh->dev;
+	int minor = video_devdata(file)->minor;
+
+	viu_stop_dma(dev);
+	videobuf_stop(&fh->vb_vidq);
+
+	kfree(fh);
+
+	dev->users--;
+	dprintk(1, "close (minor=%d, users=%d)\n",
+		minor, dev->users);
+	return 0;
+}
+
+void viu_reset(struct viu_reg *reg)
+{
+	out_be32(&reg->status_cfg, 0);
+	out_be32(&reg->luminance, 0x9512a254);
+	out_be32(&reg->chroma_r, 0x03310000);
+	out_be32(&reg->chroma_g, 0x06600f38);
+	out_be32(&reg->chroma_b, 0x00000409);
+	out_be32(&reg->field_base_addr, 0);
+	out_be32(&reg->dma_inc, 0);
+	out_be32(&reg->picture_count, 0x01e002d0);
+	out_be32(&reg->req_alarm, 0x00000090);
+	out_be32(&reg->alpha, 0x000000ff);
+}
+
+static int viu_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct viu_fh *fh = file->private_data;
+	int ret;
+
+	dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
+
+	ret = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+
+	dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n",
+		(unsigned long)vma->vm_start,
+		(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
+		ret);
+
+	return ret;
+}
+
+static struct v4l2_file_operations viu_fops = {
+	.owner		= THIS_MODULE,
+	.open		= viu_open,
+	.release	= viu_release,
+	.read		= viu_read,
+	.poll		= viu_poll,
+	.ioctl		= video_ioctl2, /* V4L2 ioctl handler */
+	.mmap		= viu_mmap,
+};
+
+static const struct v4l2_ioctl_ops viu_ioctl_ops = {
+	.vidioc_querycap	= vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_cap,
+	.vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt,
+	.vidioc_g_fmt_vid_overlay = vidioc_g_fmt_overlay,
+	.vidioc_try_fmt_vid_overlay = vidioc_try_fmt_overlay,
+	.vidioc_s_fmt_vid_overlay = vidioc_s_fmt_overlay,
+	.vidioc_g_fbuf	      = vidioc_g_fbuf,
+	.vidioc_s_fbuf	      = vidioc_s_fbuf,
+	.vidioc_reqbufs       = vidioc_reqbufs,
+	.vidioc_querybuf      = vidioc_querybuf,
+	.vidioc_qbuf          = vidioc_qbuf,
+	.vidioc_dqbuf         = vidioc_dqbuf,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_queryctrl     = vidioc_queryctrl,
+	.vidioc_g_ctrl        = vidioc_g_ctrl,
+	.vidioc_s_ctrl        = vidioc_s_ctrl,
+	.vidioc_streamon      = vidioc_streamon,
+	.vidioc_streamoff     = vidioc_streamoff,
+};
+
+static struct video_device viu_template = {
+	.name		= "FSL viu",
+	.fops		= &viu_fops,
+	.minor		= -1,
+	.ioctl_ops	= &viu_ioctl_ops,
+	.release	= video_device_release,
+
+	.tvnorms        = V4L2_STD_NTSC_M | V4L2_STD_PAL,
+	.current_norm   = V4L2_STD_NTSC_M,
+};
+
+static int __devinit viu_of_probe(struct of_device *op,
+				  const struct of_device_id *match)
+{
+	struct viu_dev *viu_dev;
+	struct video_device *vdev;
+	struct resource r;
+	struct viu_reg __iomem *viu_regs;
+	struct i2c_adapter *ad;
+	int ret, viu_irq;
+
+	ret = of_address_to_resource(op->dev.of_node, 0, &r);
+	if (ret) {
+		dev_err(&op->dev, "Can't parse device node resource\n");
+		return -ENODEV;
+	}
+
+	viu_irq = irq_of_parse_and_map(op->dev.of_node, 0);
+	if (viu_irq == NO_IRQ) {
+		dev_err(&op->dev, "Error while mapping the irq\n");
+		return -EINVAL;
+	}
+
+	/* request mem region */
+	if (!devm_request_mem_region(&op->dev, r.start,
+				     sizeof(struct viu_reg), DRV_NAME)) {
+		dev_err(&op->dev, "Error while requesting mem region\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* remap registers */
+	viu_regs = devm_ioremap(&op->dev, r.start, sizeof(struct viu_reg));
+	if (!viu_regs) {
+		dev_err(&op->dev, "Can't map register set\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* Prepare our private structure */
+	viu_dev = devm_kzalloc(&op->dev, sizeof(struct viu_dev), GFP_ATOMIC);
+	if (!viu_dev) {
+		dev_err(&op->dev, "Can't allocate private structure\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	viu_dev->vr = viu_regs;
+	viu_dev->irq = viu_irq;
+	viu_dev->dev = &op->dev;
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&viu_dev->vidq.active);
+	INIT_LIST_HEAD(&viu_dev->vidq.queued);
+
+	/* initialize locks */
+	mutex_init(&viu_dev->lock);
+
+	snprintf(viu_dev->v4l2_dev.name,
+		 sizeof(viu_dev->v4l2_dev.name), "%s", "VIU");
+	ret = v4l2_device_register(viu_dev->dev, &viu_dev->v4l2_dev);
+	if (ret < 0) {
+		dev_err(&op->dev, "v4l2_device_register() failed: %d\n", ret);
+		goto err;
+	}
+
+	ad = i2c_get_adapter(0);
+	viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad,
+			"saa7115", "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
+
+	viu_dev->vidq.timeout.function = viu_vid_timeout;
+	viu_dev->vidq.timeout.data     = (unsigned long)viu_dev;
+	init_timer(&viu_dev->vidq.timeout);
+	viu_dev->first = 1;
+
+	/* Allocate memory for video device */
+	vdev = video_device_alloc();
+	if (vdev == NULL) {
+		ret = -ENOMEM;
+		goto err_vdev;
+	}
+
+	memcpy(vdev, &viu_template, sizeof(viu_template));
+
+	vdev->v4l2_dev = &viu_dev->v4l2_dev;
+
+	viu_dev->vdev = vdev;
+
+	video_set_drvdata(viu_dev->vdev, viu_dev);
+
+	ret = video_register_device(viu_dev->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret < 0) {
+		video_device_release(viu_dev->vdev);
+		goto err_vdev;
+	}
+
+	/* enable VIU clock */
+	viu_dev->clk = clk_get(&op->dev, "viu_clk");
+	if (IS_ERR(viu_dev->clk)) {
+		dev_err(&op->dev, "failed to find the clock module!\n");
+		ret = -ENODEV;
+		goto err_clk;
+	} else {
+		clk_enable(viu_dev->clk);
+	}
+
+	/* reset VIU module */
+	viu_reset(viu_dev->vr);
+
+	/* install interrupt handler */
+	if (request_irq(viu_dev->irq, viu_intr, 0, "viu", (void *)viu_dev)) {
+		dev_err(&op->dev, "Request VIU IRQ failed.\n");
+		ret = -ENODEV;
+		goto err_irq;
+	}
+
+	dev_info(&op->dev, "Freescale VIU Video Capture Board\n");
+	return ret;
+
+err_irq:
+	clk_disable(viu_dev->clk);
+	clk_put(viu_dev->clk);
+err_clk:
+	video_unregister_device(viu_dev->vdev);
+err_vdev:
+	i2c_put_adapter(ad);
+	v4l2_device_unregister(&viu_dev->v4l2_dev);
+err:
+	irq_dispose_mapping(viu_irq);
+	return ret;
+}
+
+static int __devexit viu_of_remove(struct of_device *op)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
+	struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
+	struct v4l2_subdev *sdev = list_entry(v4l2_dev->subdevs.next,
+					      struct v4l2_subdev, list);
+	struct i2c_client *client = v4l2_get_subdevdata(sdev);
+
+	free_irq(dev->irq, (void *)dev);
+	irq_dispose_mapping(dev->irq);
+
+	clk_disable(dev->clk);
+	clk_put(dev->clk);
+
+	video_unregister_device(dev->vdev);
+	i2c_put_adapter(client->adapter);
+	v4l2_device_unregister(&dev->v4l2_dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int viu_suspend(struct of_device *op, pm_message_t state)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
+	struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
+
+	clk_disable(dev->clk);
+	return 0;
+}
+
+static int viu_resume(struct of_device *op)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
+	struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
+
+	clk_enable(dev->clk);
+	return 0;
+}
+#endif
+
+/*
+ * Initialization and module stuff
+ */
+static struct of_device_id mpc512x_viu_of_match[] = {
+	{
+		.compatible = "fsl,mpc5121-viu",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc512x_viu_of_match);
+
+static struct of_platform_driver viu_of_platform_driver = {
+	.probe = viu_of_probe,
+	.remove = __devexit_p(viu_of_remove),
+#ifdef CONFIG_PM
+	.suspend = viu_suspend,
+	.resume = viu_resume,
+#endif
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = mpc512x_viu_of_match,
+	},
+};
+
+static int __init viu_init(void)
+{
+	return of_register_platform_driver(&viu_of_platform_driver);
+}
+
+static void __exit viu_exit(void)
+{
+	of_unregister_platform_driver(&viu_of_platform_driver);
+}
+
+module_init(viu_init);
+module_exit(viu_exit);
+
+MODULE_DESCRIPTION("Freescale Video-In(VIU)");
+MODULE_AUTHOR("Hongjun Chen");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 5d920e584de..23db0c29f68 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -246,6 +246,15 @@ config USB_GSPCA_SPCA561
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_spca561.
 
+config USB_GSPCA_SPCA1528
+	tristate "SPCA1528 USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the SPCA1528 chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_spca1528.
+
 config USB_GSPCA_SQ905
 	tristate "SQ Technologies SQ905 based USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
@@ -264,6 +273,15 @@ config USB_GSPCA_SQ905C
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_sq905c.
 
+config USB_GSPCA_SQ930X
+	tristate "SQ Technologies SQ930X based USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the SQ930X chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_sq930x.
+
 config USB_GSPCA_STK014
 	tristate "Syntek DV4000 (STK014) USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 6e4cf1ce01c..f6616db0b7f 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -23,8 +23,10 @@ obj-$(CONFIG_USB_GSPCA_SPCA505)  += gspca_spca505.o
 obj-$(CONFIG_USB_GSPCA_SPCA506)  += gspca_spca506.o
 obj-$(CONFIG_USB_GSPCA_SPCA508)  += gspca_spca508.o
 obj-$(CONFIG_USB_GSPCA_SPCA561)  += gspca_spca561.o
+obj-$(CONFIG_USB_GSPCA_SPCA1528) += gspca_spca1528.o
 obj-$(CONFIG_USB_GSPCA_SQ905)    += gspca_sq905.o
 obj-$(CONFIG_USB_GSPCA_SQ905C)   += gspca_sq905c.o
+obj-$(CONFIG_USB_GSPCA_SQ930X)   += gspca_sq930x.o
 obj-$(CONFIG_USB_GSPCA_SUNPLUS)  += gspca_sunplus.o
 obj-$(CONFIG_USB_GSPCA_STK014)   += gspca_stk014.o
 obj-$(CONFIG_USB_GSPCA_STV0680)  += gspca_stv0680.o
@@ -58,8 +60,10 @@ gspca_spca505-objs  := spca505.o
 gspca_spca506-objs  := spca506.o
 gspca_spca508-objs  := spca508.o
 gspca_spca561-objs  := spca561.o
+gspca_spca1528-objs := spca1528.o
 gspca_sq905-objs    := sq905.o
 gspca_sq905c-objs   := sq905c.o
+gspca_sq930x-objs   := sq930x.o
 gspca_stk014-objs   := stk014.o
 gspca_stv0680-objs  := stv0680.o
 gspca_sunplus-objs  := sunplus.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 19fe6b24c9a..d6a75772f3f 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -41,7 +41,7 @@ struct sd {
 #define QUALITY_MAX 60
 #define QUALITY_DEF 40
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
@@ -845,9 +845,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -862,11 +859,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 /* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
 	int retry = 50;
 
-	kfree(sd->jpeg_hdr);
-
 	if (!gspca_dev->present)
 		return;
 	reg_w_val(gspca_dev, 0x0000, 0x00);
diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
index 58b696f455b..3747a1dcff5 100644
--- a/drivers/media/video/gspca/cpia1.c
+++ b/drivers/media/video/gspca/cpia1.c
@@ -1760,22 +1760,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	    data[25] == sd->params.roi.colEnd &&
 	    data[26] == sd->params.roi.rowStart &&
 	    data[27] == sd->params.roi.rowEnd) {
-		struct gspca_frame *frame = gspca_get_i_frame(gspca_dev);
+		u8 *image;
 
 		atomic_set(&sd->cam_exposure, data[39] * 2);
 		atomic_set(&sd->fps, data[41]);
 
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-
 		/* Check for proper EOF for last frame */
-		if ((frame->data_end - frame->data) > 4 &&
-		    frame->data_end[-4] == 0xff &&
-		    frame->data_end[-3] == 0xff &&
-		    frame->data_end[-2] == 0xff &&
-		    frame->data_end[-1] == 0xff)
+		image = gspca_dev->image;
+		if (image != NULL &&
+		    gspca_dev->image_len > 4 &&
+		    image[gspca_dev->image_len - 4] == 0xff &&
+		    image[gspca_dev->image_len - 3] == 0xff &&
+		    image[gspca_dev->image_len - 2] == 0xff &&
+		    image[gspca_dev->image_len - 1] == 0xff)
 			gspca_frame_add(gspca_dev, LAST_PACKET,
 						NULL, 0);
 
diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/video/gspca/gl860/gl860-mi2020.c
index 7c31b4f2abe..57782e011c9 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi2020.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi2020.c
@@ -1,6 +1,7 @@
 /* Subdriver for the GL860 chip with the MI2020 sensor
- * Author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's
- * logs(B) and Tricid"s logs(C). With the help of Kytrix/BUGabundo/Blazercist.
+ * Author Olivier LORIN, from logs by Iceman/Soro2005 + Fret_saw/Hulkie/Tricid
+ * with the help of Kytrix/BUGabundo/Blazercist.
+ * Driver achieved thanks to a webcam gift by Kytrix.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,47 +21,70 @@
 
 #include "gl860.h"
 
+static u8 dat_wbal1[] = {0x8c, 0xa2, 0x0c};
+
 static u8 dat_bright1[] = {0x8c, 0xa2, 0x06};
 static u8 dat_bright3[] = {0x8c, 0xa1, 0x02};
 static u8 dat_bright4[] = {0x90, 0x00, 0x0f};
 static u8 dat_bright5[] = {0x8c, 0xa1, 0x03};
 static u8 dat_bright6[] = {0x90, 0x00, 0x05};
 
-static u8 dat_dummy1[] = {0x90, 0x00, 0x06};
-/*static u8 dummy2[] = {0x8c, 0xa1, 0x02};*/
-/*static u8 dummy3[] = {0x90, 0x00, 0x1f};*/
-
 static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19};
 static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b};
 static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03};
 static u8 dat_hvflip6[] = {0x90, 0x00, 0x06};
 
+static struct idxdata tbl_middle_hvflip_low[] = {
+	{0x33, "\x90\x00\x06"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x90\x00\x06"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x90\x00\x06"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x90\x00\x06"},
+	{6, "\xff\xff\xff"},
+};
+
+static struct idxdata tbl_middle_hvflip_big[] = {
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa1\x20"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"},
+	{102, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa1\x20"},
+	{0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
+};
+
+static struct idxdata tbl_end_hvflip[] = {
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+	{6, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+};
+
 static u8 dat_freq1[] = { 0x8c, 0xa4, 0x04 };
 
 static u8 dat_multi5[] = { 0x8c, 0xa1, 0x03 };
 static u8 dat_multi6[] = { 0x90, 0x00, 0x05 };
 
-static struct validx tbl_common1[] = {
-	{0x0000, 0x0000},
-	{1, 0xffff}, /* msleep(35); */
-	{0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, {0x0000, 0x00c0},
-	{0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0004, 0x00d8},
-	{0x0000, 0x0058}, {0x0002, 0x0004}, {0x0041, 0x0000},
+static struct validx tbl_init_at_startup[] = {
+	{0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001,0x00c1},
+	{0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d},
+	{53, 0xffff},
+	{0x0040, 0x0000}, {0x0063, 0x0006},
 };
 
-static struct validx tbl_common2[] = {
-	{0x006a, 0x0007},
-	{35, 0xffff},
-	{0x00ef, 0x0006},
-	{35, 0xffff},
-	{0x006a, 0x000d},
-	{35, 0xffff},
-	{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2},
+static struct validx tbl_common_0B[] = {
+	{0x0002, 0x0004}, {0x006a, 0x0007}, {0x00ef, 0x0006}, {0x006a,0x000d},
+	{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042,0x00c2},
 	{0x0004, 0x00d8}, {0x0000, 0x0058}, {0x0041, 0x0000},
 };
 
-static struct idxdata tbl_common3[] = {
-	{0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"},
+static struct idxdata tbl_common_3B[] = {
+	{0x33, "\x86\x25\x01"}, {0x33, "\x86\x25\x00"},
+	{2, "\xff\xff\xff"},
+	{0x30, "\x1a\x0a\xcc"}, {0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"},
 	{6, "\xff\xff\xff"}, /* 12 */
 	{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
 	{2, "\xff\xff\xff"}, /* - */
@@ -98,85 +122,58 @@ static struct idxdata tbl_common3[] = {
 	{0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"},
 	{0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"},
 	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"},
-	{1, "\xff\xff\xff"},
 	{0x33, "\x78\x00\x00"},
-	{1, "\xff\xff\xff"},
+	{2, "\xff\xff\xff"},
 	{0x35, "\xb8\x1f\x20"}, {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x10"},
 	{0x33, "\x8c\xa2\x07"}, {0x33, "\x90\x00\x08"}, {0x33, "\x8c\xa2\x42"},
 	{0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x4a"}, {0x33, "\x90\x00\x8c"},
 	{0x35, "\xba\xfa\x08"}, {0x33, "\x8c\xa2\x02"}, {0x33, "\x90\x00\x22"},
-	{0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"},
-};
-
-static struct idxdata tbl_common4[] = {
-	{0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\xa4\x08"},
+	{0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"}, {0x33, "\x8c\xa4\x04"},
+	{0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa2\x0c"},
+	{0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"}, {0x33, "\x90\x00\x04"},
+	{0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, {0x33, "\x90\x21\x11"},
+	{0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x25"},
+	{0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"},
+	{0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, {0x33, "\x8c\x27\x47"},
+	{0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"}, {0x33, "\x90\x02\x84"},
+	{0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"}, {0x33, "\x8c\x27\x07"},
+	{0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"}, {0x33, "\x90\x04\xb0"},
+	{0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x0f"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"}, {0x33, "\x90\x04\xbd"},
+	{0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"}, {0x33, "\x8c\x27\x15"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, {0x33, "\x90\x21\x11"},
+	{0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, {0x33, "\x8c\x27\x1b"},
+	{0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"}, {0x33, "\x90\x01\x02"},
+	{0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"}, {0x33, "\x8c\x27\x21"},
+	{0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"}, {0x33, "\x90\x02\x85"},
+	{0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x27"},
+	{0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"}, {0x33, "\x90\x20\x20"},
+	{0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"}, {0x33, "\x8c\x27\x2d"},
+	{0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"}, {0x33, "\x90\x00\x04"},
+	{0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x33"},
+	{0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"}, {0x33, "\x90\x06\x4b"},
+	{0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x39"},
+	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"},
+	{0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, {0x33, "\x8c\x27\x41"},
+	{0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"}, {0x33, "\x90\x04\xed"},
+	{0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x51"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"}, {0x33, "\x90\x03\x20"},
+	{0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x57"},
+	{0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x63"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"}, {0x33, "\x90\x04\xb0"},
+	{0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"}, {0x33, "\x8c\xa4\x08"},
 	{0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x21"},
 	{0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\xa4\x0b"},
-	{0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa0"},
-	{0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc0"}, {0x33, "\x8c\x24\x15"},
-	{0x33, "\x90\x00\xa0"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\xc0"},
-};
-
-static struct idxdata tbl_common5[] = {
-	{0x33, "\x8c\xa4\x04"}, {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"},
-	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"},
-	{0x33, "\x8c\xa2\x0c"}, {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"},
-	{0x33, "\x90\x00\x04"}, {0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"},
-	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"},
-	/* msleep(53); */
-	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"},
-	{0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"},
-	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"},
-	{0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"},
-	{0x33, "\x90\x02\x84"}, {0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"},
-	{0x33, "\x8c\x27\x07"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"},
-	{0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"},
-	{0x33, "\x8c\x27\x0f"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"},
-	{0x33, "\x90\x04\xbd"}, {0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"},
-	{0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"},
-	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"},
-	{0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"},
-	{0x33, "\x90\x01\x02"}, {0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"},
-	{0x33, "\x8c\x27\x21"}, {0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"},
-	{0x33, "\x90\x02\x85"}, {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"},
-	{0x33, "\x8c\x27\x27"}, {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"},
-	{0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"},
-	{0x33, "\x8c\x27\x2d"}, {0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"},
-	{0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"},
-	{0x33, "\x8c\x27\x33"}, {0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"},
-	{0x33, "\x90\x06\x4b"}, {0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"},
-	{0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"},
-	{0x33, "\x90\x00\x24"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"},
-	{0x33, "\x8c\x27\x41"}, {0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"},
-	{0x33, "\x90\x04\xed"}, {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"},
-	{0x33, "\x8c\x27\x51"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"},
-	{0x33, "\x90\x03\x20"}, {0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"},
-	{0x33, "\x8c\x27\x57"}, {0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"},
-	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"},
-	{0x33, "\x8c\x27\x63"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"},
-	{0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"},
-	{0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"},
-	{0x33, "\x90\x00\x21"}, {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"},
-	{0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"},
-	{0x33, "\x90\x00\xa1"}, {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"},
-	{0x33, "\x8c\x24\x15"},
-};
-
-static struct validx tbl_init_at_startup[] = {
-	{0x0000, 0x0000},
-	{53, 0xffff},
-	{0x0010, 0x0010},
-	{53, 0xffff},
-	{0x0008, 0x00c0},
-	{53, 0xffff},
-	{0x0001, 0x00c1},
-	{53, 0xffff},
-	{0x0001, 0x00c2},
-	{53, 0xffff},
-	{0x0020, 0x0006},
-	{53, 0xffff},
-	{0x006a, 0x000d},
-	{53, 0xffff},
+	{0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa1"},
+	{0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"}, {0x33, "\x8c\x24\x15"},
+	{0x33, "\x90\x00\x6a"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\x80"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{3, "\xff\xff\xff"},
 };
 
 static struct idxdata tbl_init_post_alt_low1[] = {
@@ -209,7 +206,7 @@ static struct idxdata tbl_init_post_alt_low3[] = {
 	{2, "\xff\xff\xff"},
 	{0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"},
 	{0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"},
-	{2, "\xff\xff\xff"}, /* - * */
+	{2, "\xff\xff\xff"},
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
 	{2, "\xff\xff\xff"},
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
@@ -217,61 +214,15 @@ static struct idxdata tbl_init_post_alt_low3[] = {
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
 	{2, "\xff\xff\xff"},
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
-	{1, "\xff\xff\xff"},
-};
-
-static struct idxdata tbl_init_post_alt_low4[] = {
-	{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
-	{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
-	{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
-	{0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"},
-	{0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"},
-	{0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"},
-	{0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"},
-	{0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"},
-	{0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"},
-	{0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"},
-	{0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"},
-	{0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"},
-	{0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"},
-	{0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"},
-	{0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"},
-	{0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"},
-	{0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"},
-	{0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"},
-	{0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"},
-	{0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"},
-	{0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"},
-	{0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"},
-	{0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"},
-	{0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"},
-	{0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"},
-	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"},
-	/* Flip/Mirror h/v=1 */
-	{0x33, "\x90\x00\x3c"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"},
-	{0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"}, {0x33, "\x8c\xa1\x03"},
-	{0x33, "\x90\x00\x06"},
-	{130, "\xff\xff\xff"},
-	{0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"},
-	{0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"},
-	{100, "\xff\xff\xff"},
-	/* ?? */
-	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
-	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
-	/* Brigthness=70 */
-	{0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x46"}, {0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x0f"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
-	/* Sharpness=20 */
-	{0x32, "\x6c\x14\x08"},
 };
 
-static struct idxdata tbl_init_post_alt_big1[] = {
+static struct idxdata tbl_init_post_alt_big[] = {
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
 	{2, "\xff\xff\xff"},
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
 	{2, "\xff\xff\xff"},
 	{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
+	{2, "\xff\xff\xff"},
 	{0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x03"},
 	{0x33, "\x90\x00\x05"},
 	{2, "\xff\xff\xff"},
@@ -285,9 +236,17 @@ static struct idxdata tbl_init_post_alt_big1[] = {
 	{0x33, "\x90\x00\x03"}, {0x33, "\x8c\xa1\x34"}, {0x33, "\x90\x00\x03"},
 	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x2e\x01\x00"},
 	{0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
+	{0x33, "\x8c\x27\x97"}, {0x33, "\x90\x01\x00"},
+	{51, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"},
+	{51, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
+	{51, "\xff\xff\xff"},
 };
 
-static struct idxdata tbl_init_post_alt_big2[] = {
+static struct idxdata tbl_init_post_alt_3B[] = {
 	{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
 	{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
 	{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
@@ -316,17 +275,6 @@ static struct idxdata tbl_init_post_alt_big2[] = {
 	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"},
 };
 
-static struct idxdata tbl_init_post_alt_big3[] = {
-	{0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x1f"},
-	{0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x1f"},
-	{0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x1f"},
-	{0x33, "\x8c\xa1\x02"},
-	{0x33, "\x90\x00\x1f"},
-};
-
 static u8 *dat_640  = "\xd0\x02\xd1\x08\xd2\xe1\xd3\x02\xd4\x10\xd5\x81";
 static u8 *dat_800  = "\xd0\x02\xd1\x10\xd2\x57\xd3\x02\xd4\x18\xd5\x21";
 static u8 *dat_1280 = "\xd0\x02\xd1\x20\xd2\x01\xd3\x02\xd4\x28\xd5\x01";
@@ -351,7 +299,7 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev)
 	sd->vcur.gamma      =  0;
 	sd->vcur.hue        =  0;
 	sd->vcur.saturation = 60;
-	sd->vcur.whitebal   = 50;
+	sd->vcur.whitebal   =  0; /* 50, not done by hardware */
 	sd->vcur.mirror = 0;
 	sd->vcur.flip   = 0;
 	sd->vcur.AC50Hz = 1;
@@ -361,17 +309,12 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev)
 	sd->vmax.sharpness  =  40;
 	sd->vmax.contrast   =   3;
 	sd->vmax.gamma      =   2;
-	sd->vmax.hue        =   0 + 1; /* 200 */
-	sd->vmax.saturation =   0;     /* 100 */
-	sd->vmax.whitebal   =   0;     /* 100 */
+	sd->vmax.hue        =   0 + 1; /* 200, not done by hardware */
+	sd->vmax.saturation =   0;     /* 100, not done by hardware */
+	sd->vmax.whitebal   =   2;     /* 100, not done by hardware */
 	sd->vmax.mirror = 1;
 	sd->vmax.flip   = 1;
 	sd->vmax.AC50Hz = 1;
-	if (_MI2020b_) {
-		sd->vmax.contrast  = 0;
-		sd->vmax.gamma     = 0;
-		sd->vmax.backlight = 0;
-	}
 
 	sd->dev_camera_settings = mi2020_camera_settings;
 	sd->dev_init_at_startup = mi2020_init_at_startup;
@@ -384,51 +327,9 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev)
 
 static void common(struct gspca_dev *gspca_dev)
 {
-	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
-
-	if (_MI2020b_) {
-		fetch_validx(gspca_dev, tbl_common1, ARRAY_SIZE(tbl_common1));
-	} else {
-		if (_MI2020_)
-			ctrl_out(gspca_dev, 0x40,  1, 0x0008, 0x0004,  0, NULL);
-		else
-			ctrl_out(gspca_dev, 0x40,  1, 0x0002, 0x0004,  0, NULL);
-		msleep(35);
-		fetch_validx(gspca_dev, tbl_common2, ARRAY_SIZE(tbl_common2));
-	}
-	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0033,  3, "\x86\x25\x01");
-	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0033,  3, "\x86\x25\x00");
-	msleep(2); /* - * */
-	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0030,  3, "\x1a\x0a\xcc");
-	if (reso == IMAGE_1600)
-		msleep(2); /* 1600 */
-	fetch_idxdata(gspca_dev, tbl_common3, ARRAY_SIZE(tbl_common3));
-
-	if (_MI2020b_ || _MI2020_)
-		fetch_idxdata(gspca_dev, tbl_common4,
-				ARRAY_SIZE(tbl_common4));
-
-	fetch_idxdata(gspca_dev, tbl_common5, ARRAY_SIZE(tbl_common5));
-	if (_MI2020b_ || _MI2020_) {
-		/* Different from fret */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x78");
-		/* Same as fret */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17");
-		/* Different from fret */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x90");
-	} else {
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x6a");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x80");
-	}
-	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x05");
-	msleep(2);
-	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-	if (reso == IMAGE_1600)
-		msleep(14); /* 1600 */
-	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x06");
-	msleep(2);
+	fetch_validx(gspca_dev, tbl_common_0B, ARRAY_SIZE(tbl_common_0B));
+	fetch_idxdata(gspca_dev, tbl_common_3B, ARRAY_SIZE(tbl_common_3B));
+	ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL);
 }
 
 static int mi2020_init_at_startup(struct gspca_dev *gspca_dev)
@@ -441,8 +342,16 @@ static int mi2020_init_at_startup(struct gspca_dev *gspca_dev)
 	fetch_validx(gspca_dev, tbl_init_at_startup,
 			ARRAY_SIZE(tbl_init_at_startup));
 
+	ctrl_out(gspca_dev, 0x40,  1, 0x7a00, 0x8030,  0, NULL);
+	ctrl_in(gspca_dev, 0xc0,  2, 0x7a00, 0x8030,  1, &c);
+
 	common(gspca_dev);
 
+	msleep(61);
+/*	ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000,  0, NULL); */
+/*	msleep(36); */
+	ctrl_out(gspca_dev, 0x40,  1, 0x0001, 0x0000,  0, NULL);
+
 	return 0;
 }
 
@@ -450,17 +359,17 @@ static int mi2020_init_pre_alt(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->mirrorMask = 0;
+	sd->mirrorMask =  0;
+	sd->vold.hue   = -1;
 
-	sd->vold.backlight  = -1;
+	/* These controls need to be reset */
 	sd->vold.brightness = -1;
 	sd->vold.sharpness  = -1;
-	sd->vold.contrast   = -1;
-	sd->vold.gamma  = -1;
-	sd->vold.hue    = -1;
-	sd->vold.mirror = -1;
-	sd->vold.flip   = -1;
-	sd->vold.AC50Hz = -1;
+
+	/* If not different from default, they do not need to be set */
+	sd->vold.contrast  = 0;
+	sd->vold.gamma     = 0;
+	sd->vold.backlight = 0;
 
 	mi2020_init_post_alt(gspca_dev);
 
@@ -472,10 +381,10 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
 
-	s32 backlight = sd->vcur.backlight;
 	s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0);
 	s32 flip   = (((sd->vcur.flip   > 0) ^ sd->mirrorMask) > 0);
 	s32 freq   = (sd->vcur.AC50Hz  > 0);
+	s32 wbal   = sd->vcur.whitebal;
 
 	u8 dat_freq2[] = {0x90, 0x00, 0x80};
 	u8 dat_multi1[] = {0x8c, 0xa7, 0x00};
@@ -484,6 +393,7 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 	u8 dat_multi4[] = {0x90, 0x00, 0x00};
 	u8 dat_hvflip2[] = {0x90, 0x04, 0x6c};
 	u8 dat_hvflip4[] = {0x90, 0x00, 0x24};
+	u8 dat_wbal2[] = {0x90, 0x00, 0x00};
 	u8 c;
 
 	sd->nbIm = -1;
@@ -491,23 +401,26 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 	dat_freq2[2] = freq ? 0xc0 : 0x80;
 	dat_multi1[2] = 0x9d;
 	dat_multi3[2] = dat_multi1[2] + 1;
-	dat_multi4[2] = dat_multi2[2] = backlight;
+	if (wbal == 0) {
+		dat_multi4[2] = dat_multi2[2] = 0;
+		dat_wbal2[2] = 0x17;
+	} else if (wbal == 1) {
+		dat_multi4[2] = dat_multi2[2] = 0;
+		dat_wbal2[2] = 0x35;
+	} else if (wbal == 2) {
+		dat_multi4[2] = dat_multi2[2] = 0x20;
+		dat_wbal2[2] = 0x17;
+	}
 	dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror);
 	dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror);
 
 	msleep(200);
-
 	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
-	msleep(3); /* 35 * */
+	msleep(2);
 
 	common(gspca_dev);
 
-	ctrl_out(gspca_dev, 0x40,  1, 0x0041, 0x0000,  0, NULL);
-	msleep(70);
-
-	if (_MI2020b_)
-		ctrl_out(gspca_dev, 0x40,  1, 0x0040, 0x0000,  0, NULL);
-
+	msleep(142);
 	ctrl_out(gspca_dev, 0x40,  1, 0x0010, 0x0010,  0, NULL);
 	ctrl_out(gspca_dev, 0x40,  1, 0x0003, 0x00c1,  0, NULL);
 	ctrl_out(gspca_dev, 0x40,  1, 0x0042, 0x00c2,  0, NULL);
@@ -523,8 +436,7 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 			ctrl_out(gspca_dev, 0x40,  3, 0x0000, 0x0200,
 				12, dat_800);
 
-		if (_MI2020c_)
-			fetch_idxdata(gspca_dev, tbl_init_post_alt_low1,
+		fetch_idxdata(gspca_dev, tbl_init_post_alt_low1,
 					ARRAY_SIZE(tbl_init_post_alt_low1));
 
 		if (reso == IMAGE_800)
@@ -534,87 +446,10 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 		fetch_idxdata(gspca_dev, tbl_init_post_alt_low3,
 				ARRAY_SIZE(tbl_init_post_alt_low3));
 
-		if (_MI2020b_) {
-			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
-			msleep(150);
-		} else if (_MI2020c_) {
-			ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
-			msleep(120);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
-			msleep(30);
-		} else if (_MI2020_) {
-			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
-			msleep(120);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
-			msleep(30);
-		}
-
-		/* AC power frequency */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
-		msleep(20);
-		/* backlight */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
-		/* at init time but not after */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17");
-		/* finish the backlight */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
-		msleep(5);/* " */
-
-		if (_MI2020c_) {
-			fetch_idxdata(gspca_dev, tbl_init_post_alt_low4,
-					ARRAY_SIZE(tbl_init_post_alt_low4));
-		} else {
-			ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
-			msleep(14); /* 0xd8 */
-
-			/* flip/mirror */
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip1);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip2);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip3);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip4);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_hvflip6);
-			msleep(21);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			msleep(5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			msleep(5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			msleep(5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			msleep(5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			msleep(5);
-			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
-					3, dat_dummy1);
-			/* end of flip/mirror main part */
-			msleep(246); /* 146 */
-
-			sd->nbIm = 0;
-		}
+		ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+		msleep(120);
 		break;
 
 	case IMAGE_1280:
@@ -643,108 +478,62 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
 					3, "\x90\x04\xb0");
 		}
 
-		fetch_idxdata(gspca_dev, tbl_init_post_alt_big1,
-				ARRAY_SIZE(tbl_init_post_alt_big1));
-
-		if (reso == IMAGE_1600)
-			msleep(13); /* 1600 */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x27\x97");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x01\x00");
-		msleep(53);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
-		if (reso == IMAGE_1600)
-			msleep(13); /* 1600 */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
-		msleep(53);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02");
-		if (reso == IMAGE_1600)
-			msleep(13); /* 1600 */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
-		msleep(53);
-
-		if (_MI2020b_) {
-			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
-			if (reso == IMAGE_1600)
-				msleep(500); /* 1600 */
-			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
-			msleep(1850);
-		} else if (_MI2020c_ || _MI2020_) {
-			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
-			msleep(1850);
-			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
-			msleep(30);
-		}
+		fetch_idxdata(gspca_dev, tbl_init_post_alt_big,
+				ARRAY_SIZE(tbl_init_post_alt_big));
 
-		/* AC power frequency */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
-		msleep(20);
-		/* backlight */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
-		/* at init time but not after */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17");
-		/* finish the backlight */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
-		msleep(6); /* " */
+		ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+		msleep(1850);
+	}
 
-		ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
-		msleep(14);
+	ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
+	msleep(40);
+
+	/* AC power frequency */
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
+	msleep(33);
+	/* light source */
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal1);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal2);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+	msleep(7);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
+
+	fetch_idxdata(gspca_dev, tbl_init_post_alt_3B,
+			ARRAY_SIZE(tbl_init_post_alt_3B));
+
+	/* hvflip */
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6);
+	msleep(250);
+
+	if (reso == IMAGE_640 || reso == IMAGE_800)
+		fetch_idxdata(gspca_dev, tbl_middle_hvflip_low,
+				ARRAY_SIZE(tbl_middle_hvflip_low));
+	else
+		fetch_idxdata(gspca_dev, tbl_middle_hvflip_big,
+				ARRAY_SIZE(tbl_middle_hvflip_big));
 
-		if (_MI2020c_)
-			fetch_idxdata(gspca_dev, tbl_init_post_alt_big2,
-					ARRAY_SIZE(tbl_init_post_alt_big2));
+	fetch_idxdata(gspca_dev, tbl_end_hvflip,
+			ARRAY_SIZE(tbl_end_hvflip));
 
-		/* flip/mirror */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6);
-		/* end of flip/mirror main part */
-		msleep(16);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
-		if (reso == IMAGE_1600)
-			msleep(25); /* 1600 */
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
-		msleep(103);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
-		sd->nbIm = 0;
-
-		if (_MI2020c_)
-			fetch_idxdata(gspca_dev, tbl_init_post_alt_big3,
-					ARRAY_SIZE(tbl_init_post_alt_big3));
-	}
+	sd->nbIm = 0;
 
 	sd->vold.mirror    = mirror;
 	sd->vold.flip      = flip;
 	sd->vold.AC50Hz    = freq;
-	sd->vold.backlight = backlight;
+	sd->vold.whitebal  = wbal;
 
 	mi2020_camera_settings(gspca_dev);
 
@@ -772,6 +561,7 @@ static int mi2020_configure_alt(struct gspca_dev *gspca_dev)
 static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
 
 	s32 backlight = sd->vcur.backlight;
 	s32 bright =  sd->vcur.brightness;
@@ -782,6 +572,7 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 	s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0);
 	s32 flip   = (((sd->vcur.flip   > 0) ^ sd->mirrorMask) > 0);
 	s32 freq   = (sd->vcur.AC50Hz > 0);
+	s32 wbal   = sd->vcur.whitebal;
 
 	u8 dat_sharp[] = {0x6c, 0x00, 0x08};
 	u8 dat_bright2[] = {0x90, 0x00, 0x00};
@@ -792,6 +583,7 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 	u8 dat_multi4[] = {0x90, 0x00, 0x00};
 	u8 dat_hvflip2[] = {0x90, 0x04, 0x6c};
 	u8 dat_hvflip4[] = {0x90, 0x00, 0x24};
+	u8 dat_wbal2[] = {0x90, 0x00, 0x00};
 
 	/* Less than 4 images received -> too early to set the settings */
 	if (sd->nbIm < 4) {
@@ -809,67 +601,89 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 		msleep(20);
 	}
 
+	if (wbal != sd->vold.whitebal) {
+		sd->vold.whitebal = wbal;
+		if (wbal < 0 || wbal > sd->vmax.whitebal)
+			wbal = 0;
+
+		dat_multi1[2] = 0x9d;
+		dat_multi3[2] = dat_multi1[2] + 1;
+		if (wbal == 0) {
+			dat_multi4[2] = dat_multi2[2] = 0;
+			dat_wbal2[2] = 0x17;
+		} else if (wbal == 1) {
+			dat_multi4[2] = dat_multi2[2] = 0;
+			dat_wbal2[2] = 0x35;
+		} else if (wbal == 2) {
+			dat_multi4[2] = dat_multi2[2] = 0x20;
+			dat_wbal2[2] = 0x17;
+		}
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+	}
+
 	if (mirror != sd->vold.mirror || flip != sd->vold.flip) {
 		sd->vold.mirror = mirror;
 		sd->vold.flip   = flip;
 
 		dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror);
 		dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror);
+
+		fetch_idxdata(gspca_dev, tbl_init_post_alt_3B,
+				ARRAY_SIZE(tbl_init_post_alt_3B));
+
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6);
-		msleep(130);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
-		msleep(6);
-
-		/* Sometimes present, sometimes not, useful? */
-		/* ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
-		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);*/
+		msleep(40);
+
+		if (reso == IMAGE_640 || reso == IMAGE_800)
+			fetch_idxdata(gspca_dev, tbl_middle_hvflip_low,
+					ARRAY_SIZE(tbl_middle_hvflip_low));
+		else
+			fetch_idxdata(gspca_dev, tbl_middle_hvflip_big,
+					ARRAY_SIZE(tbl_middle_hvflip_big));
+
+		fetch_idxdata(gspca_dev, tbl_end_hvflip,
+				ARRAY_SIZE(tbl_end_hvflip));
 	}
 
-	if (backlight != sd->vold.backlight) {
-		sd->vold.backlight = backlight;
-		if (backlight < 0 || backlight > sd->vmax.backlight)
-			backlight = 0;
+	if (bright != sd->vold.brightness) {
+		sd->vold.brightness = bright;
+		if (bright < 0 || bright > sd->vmax.brightness)
+			bright = 0;
 
-		dat_multi1[2] = 0x9d;
-		dat_multi3[2] = dat_multi1[2] + 1;
-		dat_multi4[2] = dat_multi2[2] = backlight;
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+		dat_bright2[2] = bright;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6);
 	}
 
-	if (gam != sd->vold.gamma) {
+	if (cntr != sd->vold.contrast || gam != sd->vold.gamma) {
+		sd->vold.contrast = cntr;
+		if (cntr < 0 || cntr > sd->vmax.contrast)
+			cntr = 0;
 		sd->vold.gamma = gam;
 		if (gam < 0 || gam > sd->vmax.gamma)
 			gam = 0;
 
 		dat_multi1[2] = 0x6d;
 		dat_multi3[2] = dat_multi1[2] + 1;
-		dat_multi4[2] = dat_multi2[2] = 0x40 + gam;
+		if (cntr == 0)
+			cntr = 4;
+		dat_multi4[2] = dat_multi2[2] = cntr * 0x10 + 2 - gam;
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
@@ -878,14 +692,14 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
 	}
 
-	if (cntr != sd->vold.contrast) {
-		sd->vold.contrast = cntr;
-		if (cntr < 0 || cntr > sd->vmax.contrast)
-			cntr = 0;
+	if (backlight != sd->vold.backlight) {
+		sd->vold.backlight = backlight;
+		if (backlight < 0 || backlight > sd->vmax.backlight)
+			backlight = 0;
 
-		dat_multi1[2] = 0x6d;
+		dat_multi1[2] = 0x9d;
 		dat_multi3[2] = dat_multi1[2] + 1;
-		dat_multi4[2] = dat_multi2[2] = 0x12 + 16 * cntr;
+		dat_multi4[2] = dat_multi2[2] = backlight;
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
@@ -894,20 +708,6 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
 	}
 
-	if (bright != sd->vold.brightness) {
-		sd->vold.brightness = bright;
-		if (bright < 0 || bright > sd->vmax.brightness)
-			bright = 0;
-
-		dat_bright2[2] = bright;
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5);
-		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6);
-	}
-
 	if (sharp != sd->vold.sharpness) {
 		sd->vold.sharpness = sharp;
 		if (sharp < 0 || sharp > sd->vmax.sharpness)
@@ -928,9 +728,6 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev)
 static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev)
 {
 	ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL);
-	msleep(20);
-	if (_MI2020c_ || _MI2020_)
-		ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL);
-	else
-		ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL);
+	msleep(40);
+	ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL);
 }
diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/video/gspca/gl860/gl860-ov9655.c
index d412694c50a..5ae9619d72a 100644
--- a/drivers/media/video/gspca/gl860/gl860-ov9655.c
+++ b/drivers/media/video/gspca/gl860/gl860-ov9655.c
@@ -69,7 +69,7 @@ static u8 *tbl_640[] = {
 	"\xd0\x01\xd1\x08\xd2\xe0\xd3\x01" "\xd4\x10\xd5\x80"
 };
 
-static u8 *tbl_800[] = {
+static u8 *tbl_1280[] = {
 	"\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01"
 	,
 	"\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x01\x0b\x57\x0e\x61"
@@ -217,7 +217,7 @@ static int ov9655_init_post_alt(struct gspca_dev *gspca_dev)
 
 	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
 
-	tbl = (reso == IMAGE_640) ? tbl_640 : tbl_800;
+	tbl = (reso == IMAGE_640) ? tbl_640 : tbl_1280;
 
 	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
 			tbl_length[0], tbl[0]);
diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
index 9e42476c0ea..e86eb8b4aed 100644
--- a/drivers/media/video/gspca/gl860/gl860.c
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -63,7 +63,7 @@ static int sd_set_##thename(struct gspca_dev *gspca_dev, s32 val)\
 \
 	sd->vcur.thename = val;\
 	if (gspca_dev->streaming)\
-		sd->dev_camera_settings(gspca_dev);\
+		sd->waitSet = 1;\
 	return 0;\
 } \
 static int sd_get_##thename(struct gspca_dev *gspca_dev, s32 *val)\
@@ -91,7 +91,6 @@ SD_SETGET(contrast)
 /* control table */
 static struct ctrl sd_ctrls_mi1320[GL860_NCTRLS];
 static struct ctrl sd_ctrls_mi2020[GL860_NCTRLS];
-static struct ctrl sd_ctrls_mi2020b[GL860_NCTRLS];
 static struct ctrl sd_ctrls_ov2640[GL860_NCTRLS];
 static struct ctrl sd_ctrls_ov9655[GL860_NCTRLS];
 
@@ -121,8 +120,6 @@ static int gl860_build_control_table(struct gspca_dev *gspca_dev)
 		sd_ctrls = sd_ctrls_mi1320;
 	else if (_MI2020_)
 		sd_ctrls = sd_ctrls_mi2020;
-	else if (_MI2020b_)
-		sd_ctrls = sd_ctrls_mi2020b;
 	else if (_OV2640_)
 		sd_ctrls = sd_ctrls_ov2640;
 	else if (_OV9655_)
@@ -187,19 +184,6 @@ static const struct sd_desc sd_desc_mi2020 = {
 	.dq_callback = sd_callback,
 };
 
-static const struct sd_desc sd_desc_mi2020b = {
-	.name        = MODULE_NAME,
-	.ctrls       = sd_ctrls_mi2020b,
-	.nctrls      = GL860_NCTRLS,
-	.config      = sd_config,
-	.init        = sd_init,
-	.isoc_init   = sd_isoc_init,
-	.start       = sd_start,
-	.stop0       = sd_stop0,
-	.pkt_scan    = sd_pkt_scan,
-	.dq_callback = sd_callback,
-};
-
 static const struct sd_desc sd_desc_ov2640 = {
 	.name        = MODULE_NAME,
 	.ctrls       = sd_ctrls_ov2640,
@@ -235,9 +219,9 @@ static struct v4l2_pix_format mi2020_mode[] = {
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0
 	},
-	{ 800,  600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+	{ 800,  598, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
 		.bytesperline = 800,
-		.sizeimage = 800 * 600,
+		.sizeimage = 800 * 598,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1
 	},
@@ -247,9 +231,9 @@ static struct v4l2_pix_format mi2020_mode[] = {
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2
 	},
-	{1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+	{1600, 1198, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
 		.bytesperline = 1600,
-		.sizeimage = 1600 * 1200,
+		.sizeimage = 1600 * 1198,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 3
 	},
@@ -344,8 +328,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		sd->sensor = ID_OV9655;
 	else if (strcmp(sensor, "MI2020") == 0)
 		sd->sensor = ID_MI2020;
-	else if (strcmp(sensor, "MI2020b") == 0)
-		sd->sensor = ID_MI2020b;
 
 	/* Get sensor and set the suitable init/start/../stop functions */
 	if (gl860_guess_sensor(gspca_dev, vendor_id, product_id) == -1)
@@ -369,13 +351,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		dev_init_settings   = mi2020_init_settings;
 		break;
 
-	case ID_MI2020b:
-		gspca_dev->sd_desc = &sd_desc_mi2020b;
-		cam->cam_mode = mi2020_mode;
-		cam->nmodes = ARRAY_SIZE(mi2020_mode);
-		dev_init_settings   = mi2020_init_settings;
-		break;
-
 	case ID_OV2640:
 		gspca_dev->sd_desc = &sd_desc_ov2640;
 		cam->cam_mode = ov2640_mode;
@@ -620,10 +595,7 @@ int gl860_RTx(struct gspca_dev *gspca_dev,
 	else if (len > 1 && r < len)
 		PDEBUG(D_ERR, "short ctrl transfer %d/%d", r, len);
 
-	if ((_MI2020_ || _MI2020b_ || _MI2020c_) && (val || index))
-		msleep(1);
-	if (_OV2640_)
-		msleep(1);
+	msleep(1);
 
 	return r;
 }
@@ -767,8 +739,6 @@ static int gl860_guess_sensor(struct gspca_dev *gspca_dev,
 		PDEBUG(D_PROBE, "05e3:f191 sensor MI1320 (1.3M)");
 	} else if (_MI2020_) {
 		PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 (2.0M)");
-	} else if (_MI2020b_) {
-		PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 alt. driver (2.0M)");
 	} else if (_OV9655_) {
 		PDEBUG(D_PROBE, "05e3:0503 sensor OV9655 (1.3M)");
 	} else if (_OV2640_) {
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
index 305061ff838..49ad4acbf60 100644
--- a/drivers/media/video/gspca/gl860/gl860.h
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -32,19 +32,16 @@
 #define ID_OV2640   2
 #define ID_OV9655   4
 #define ID_MI2020   8
-#define ID_MI2020b 16
 
 #define _MI1320_  (((struct sd *) gspca_dev)->sensor == ID_MI1320)
 #define _MI2020_  (((struct sd *) gspca_dev)->sensor == ID_MI2020)
-#define _MI2020b_ (((struct sd *) gspca_dev)->sensor == ID_MI2020b)
-#define _MI2020c_ 0
 #define _OV2640_  (((struct sd *) gspca_dev)->sensor == ID_OV2640)
 #define _OV9655_  (((struct sd *) gspca_dev)->sensor == ID_OV9655)
 
 #define IMAGE_640   0
 #define IMAGE_800   1
 #define IMAGE_1280  2
-#define IMAGE_1600 3
+#define IMAGE_1600  3
 
 struct sd_gl860 {
 	u16 backlight;
@@ -75,10 +72,10 @@ struct sd {
 	int  (*dev_camera_settings)(struct gspca_dev *);
 
 	u8   swapRB;
-	u8  mirrorMask;
-	u8  sensor;
-	s32 nbIm;
-	s32 nbRightUp;
+	u8   mirrorMask;
+	u8   sensor;
+	s32  nbIm;
+	s32  nbRightUp;
 	u8   waitSet;
 };
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 678675bb365..d951b0f0e05 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -201,7 +201,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 
 	buffer_len = le16_to_cpu(ep->wMaxPacketSize);
 	interval = ep->bInterval;
-	PDEBUG(D_PROBE, "found int in endpoint: 0x%x, "
+	PDEBUG(D_CONF, "found int in endpoint: 0x%x, "
 		"buffer_len=%u, interval=%u",
 		ep->bEndpointAddress, buffer_len, interval);
 
@@ -226,7 +226,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 	gspca_dev->int_urb = urb;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
-		PDEBUG(D_ERR, "submit URB failed with error %i", ret);
+		PDEBUG(D_ERR, "submit int URB failed with error %i", ret);
 		goto error_submit;
 	}
 	return ret;
@@ -294,19 +294,6 @@ static inline int gspca_input_connect(struct gspca_dev *dev)
 }
 #endif
 
-/* get the current input frame buffer */
-struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev)
-{
-	struct gspca_frame *frame;
-
-	frame = gspca_dev->cur_frame;
-	if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS)
-				!= V4L2_BUF_FLAG_QUEUED)
-		return NULL;
-	return frame;
-}
-EXPORT_SYMBOL(gspca_get_i_frame);
-
 /*
  * fill a video frame from an URB and resubmit
  */
@@ -439,20 +426,20 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 
 	PDEBUG(D_PACK, "add t:%d l:%d",	packet_type, len);
 
-	/* check the availability of the frame buffer */
-	frame = gspca_dev->cur_frame;
-	if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS)
-					!= V4L2_BUF_FLAG_QUEUED) {
-		gspca_dev->last_packet_type = DISCARD_PACKET;
-		return;
-	}
-
-	/* when start of a new frame, if the current frame buffer
-	 * is not queued, discard the whole frame */
 	if (packet_type == FIRST_PACKET) {
-		frame->data_end = frame->data;
+		i = atomic_read(&gspca_dev->fr_i);
+
+		/* if there are no queued buffer, discard the whole frame */
+		if (i == atomic_read(&gspca_dev->fr_q)) {
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			return;
+		}
+		j = gspca_dev->fr_queue[i];
+		frame = &gspca_dev->frame[j];
 		frame->v4l2_buf.timestamp = ktime_to_timeval(ktime_get());
 		frame->v4l2_buf.sequence = ++gspca_dev->sequence;
+		gspca_dev->image = frame->data;
+		gspca_dev->image_len = 0;
 	} else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
 		if (packet_type == LAST_PACKET)
 			gspca_dev->last_packet_type = packet_type;
@@ -461,34 +448,37 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 
 	/* append the packet to the frame buffer */
 	if (len > 0) {
-		if (frame->data_end - frame->data + len
-						 > frame->v4l2_buf.length) {
-			PDEBUG(D_ERR|D_PACK, "frame overflow %zd > %d",
-				frame->data_end - frame->data + len,
-				frame->v4l2_buf.length);
+		if (gspca_dev->image_len + len > gspca_dev->frsz) {
+			PDEBUG(D_ERR|D_PACK, "frame overflow %d > %d",
+				gspca_dev->image_len + len,
+				gspca_dev->frsz);
 			packet_type = DISCARD_PACKET;
 		} else {
-			memcpy(frame->data_end, data, len);
-			frame->data_end += len;
+			memcpy(gspca_dev->image + gspca_dev->image_len,
+				data, len);
+			gspca_dev->image_len += len;
 		}
 	}
 	gspca_dev->last_packet_type = packet_type;
 
-	/* if last packet, wake up the application and advance in the queue */
+	/* if last packet, invalidate packet concatenation until
+	 * next first packet, wake up the application and advance
+	 * in the queue */
 	if (packet_type == LAST_PACKET) {
-		frame->v4l2_buf.bytesused = frame->data_end - frame->data;
-		frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_QUEUED;
-		frame->v4l2_buf.flags |= V4L2_BUF_FLAG_DONE;
-		wake_up_interruptible(&gspca_dev->wq);	/* event = new frame */
-		i = (gspca_dev->fr_i + 1) % gspca_dev->nframes;
-		gspca_dev->fr_i = i;
-		PDEBUG(D_FRAM, "frame complete len:%d q:%d i:%d o:%d",
-			frame->v4l2_buf.bytesused,
-			gspca_dev->fr_q,
-			i,
-			gspca_dev->fr_o);
+		i = atomic_read(&gspca_dev->fr_i);
 		j = gspca_dev->fr_queue[i];
-		gspca_dev->cur_frame = &gspca_dev->frame[j];
+		frame = &gspca_dev->frame[j];
+		frame->v4l2_buf.bytesused = gspca_dev->image_len;
+		frame->v4l2_buf.flags = (frame->v4l2_buf.flags
+					 | V4L2_BUF_FLAG_DONE)
+					& ~V4L2_BUF_FLAG_QUEUED;
+		i = (i + 1) % GSPCA_MAX_FRAMES;
+		atomic_set(&gspca_dev->fr_i, i);
+		wake_up_interruptible(&gspca_dev->wq);	/* event = new frame */
+		PDEBUG(D_FRAM, "frame complete len:%d",
+			frame->v4l2_buf.bytesused);
+		gspca_dev->image = NULL;
+		gspca_dev->image_len = 0;
 	}
 }
 EXPORT_SYMBOL(gspca_frame_add);
@@ -506,36 +496,6 @@ static int gspca_is_compressed(__u32 format)
 	return 0;
 }
 
-static void *rvmalloc(long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	mem = vmalloc_32(size);
-	if (mem != NULL) {
-		adr = (unsigned long) mem;
-		while (size > 0) {
-			SetPageReserved(vmalloc_to_page((void *) adr));
-			adr += PAGE_SIZE;
-			size -= PAGE_SIZE;
-		}
-	}
-	return mem;
-}
-
-static void rvfree(void *mem, long size)
-{
-	unsigned long adr;
-
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *) adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
 static int frame_alloc(struct gspca_dev *gspca_dev,
 			unsigned int count)
 {
@@ -548,9 +508,9 @@ static int frame_alloc(struct gspca_dev *gspca_dev,
 	PDEBUG(D_STREAM, "frame alloc frsz: %d", frsz);
 	frsz = PAGE_ALIGN(frsz);
 	gspca_dev->frsz = frsz;
-	if (count > GSPCA_MAX_FRAMES)
-		count = GSPCA_MAX_FRAMES;
-	gspca_dev->frbuf = rvmalloc(frsz * count);
+	if (count >= GSPCA_MAX_FRAMES)
+		count = GSPCA_MAX_FRAMES - 1;
+	gspca_dev->frbuf = vmalloc_32(frsz * count);
 	if (!gspca_dev->frbuf) {
 		err("frame alloc failed");
 		return -ENOMEM;
@@ -565,14 +525,12 @@ static int frame_alloc(struct gspca_dev *gspca_dev,
 		frame->v4l2_buf.length = frsz;
 		frame->v4l2_buf.memory = gspca_dev->memory;
 		frame->v4l2_buf.sequence = 0;
-		frame->data = frame->data_end =
-					gspca_dev->frbuf + i * frsz;
+		frame->data = gspca_dev->frbuf + i * frsz;
 		frame->v4l2_buf.m.offset = i * frsz;
 	}
-	gspca_dev->fr_i = gspca_dev->fr_o = gspca_dev->fr_q = 0;
-	gspca_dev->cur_frame = &gspca_dev->frame[0];
-	gspca_dev->last_packet_type = DISCARD_PACKET;
-	gspca_dev->sequence = 0;
+	atomic_set(&gspca_dev->fr_q, 0);
+	atomic_set(&gspca_dev->fr_i, 0);
+	gspca_dev->fr_o = 0;
 	return 0;
 }
 
@@ -582,8 +540,7 @@ static void frame_free(struct gspca_dev *gspca_dev)
 
 	PDEBUG(D_STREAM, "frame free");
 	if (gspca_dev->frbuf != NULL) {
-		rvfree(gspca_dev->frbuf,
-			gspca_dev->nframes * gspca_dev->frsz);
+		vfree(gspca_dev->frbuf);
 		gspca_dev->frbuf = NULL;
 		for (i = 0; i < gspca_dev->nframes; i++)
 			gspca_dev->frame[i].data = NULL;
@@ -683,12 +640,16 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 				   : USB_ENDPOINT_XFER_ISOC;
 	i = gspca_dev->alt;			/* previous alt setting */
 	if (gspca_dev->cam.reverse_alts) {
+		if (gspca_dev->audio)
+			i++;
 		while (++i < gspca_dev->nbalt) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
 				break;
 		}
 	} else {
+		if (gspca_dev->audio)
+			i--;
 		while (--i >= 0) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
@@ -811,6 +772,12 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 		goto out;
 	}
 
+	/* reset the streaming variables */
+	gspca_dev->image = NULL;
+	gspca_dev->image_len = 0;
+	gspca_dev->last_packet_type = DISCARD_PACKET;
+	gspca_dev->sequence = 0;
+
 	gspca_dev->usb_err = 0;
 
 	/* set the higher alternate setting and
@@ -1433,34 +1400,6 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 	return ret;
 }
 
-/*fixme: have an audio flag in gspca_dev?*/
-static int vidioc_s_audio(struct file *file, void *priv,
-			 struct v4l2_audio *audio)
-{
-	if (audio->index != 0)
-		return -EINVAL;
-	return 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *priv,
-			 struct v4l2_audio *audio)
-{
-	strcpy(audio->name, "Microphone");
-	return 0;
-}
-
-static int vidioc_enumaudio(struct file *file, void *priv,
-			 struct v4l2_audio *audio)
-{
-	if (audio->index != 0)
-		return -EINVAL;
-
-	strcpy(audio->name, "Microphone");
-	audio->capability = 0;
-	audio->mode = 0;
-	return 0;
-}
-
 static int vidioc_querymenu(struct file *file, void *priv,
 			    struct v4l2_querymenu *qmenu)
 {
@@ -1504,7 +1443,8 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 	struct gspca_dev *gspca_dev = priv;
 	int i, ret = 0, streaming;
 
-	switch (rb->memory) {
+	i = rb->memory;			/* (avoid compilation warning) */
+	switch (i) {
 	case GSPCA_MEMORY_READ:			/* (internal call) */
 	case V4L2_MEMORY_MMAP:
 	case V4L2_MEMORY_USERPTR:
@@ -1626,7 +1566,7 @@ static int vidioc_streamoff(struct file *file, void *priv,
 				enum v4l2_buf_type buf_type)
 {
 	struct gspca_dev *gspca_dev = priv;
-	int i, ret;
+	int ret;
 
 	if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
@@ -1650,12 +1590,10 @@ static int vidioc_streamoff(struct file *file, void *priv,
 	gspca_stream_off(gspca_dev);
 	mutex_unlock(&gspca_dev->usb_lock);
 
-	/* empty the application queues */
-	for (i = 0; i < gspca_dev->nframes; i++)
-		gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
-	gspca_dev->fr_i = gspca_dev->fr_o = gspca_dev->fr_q = 0;
-	gspca_dev->last_packet_type = DISCARD_PACKET;
-	gspca_dev->sequence = 0;
+	/* empty the transfer queues */
+	atomic_set(&gspca_dev->fr_q, 0);
+	atomic_set(&gspca_dev->fr_i, 0);
+	gspca_dev->fr_o = 0;
 	ret = 0;
 out:
 	mutex_unlock(&gspca_dev->queue_lock);
@@ -1732,7 +1670,7 @@ static int vidioc_s_parm(struct file *filp, void *priv,
 	int n;
 
 	n = parm->parm.capture.readbuffers;
-	if (n == 0 || n > GSPCA_MAX_FRAMES)
+	if (n == 0 || n >= GSPCA_MAX_FRAMES)
 		parm->parm.capture.readbuffers = gspca_dev->nbufread;
 	else
 		gspca_dev->nbufread = n;
@@ -1755,49 +1693,6 @@ static int vidioc_s_parm(struct file *filp, void *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv,
-			struct video_mbuf *mbuf)
-{
-	struct gspca_dev *gspca_dev = file->private_data;
-	int i;
-
-	PDEBUG(D_STREAM, "cgmbuf");
-	if (gspca_dev->nframes == 0) {
-		int ret;
-
-		{
-			struct v4l2_format fmt;
-
-			fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			i = gspca_dev->cam.nmodes - 1;	/* highest mode */
-			fmt.fmt.pix.width = gspca_dev->cam.cam_mode[i].width;
-			fmt.fmt.pix.height = gspca_dev->cam.cam_mode[i].height;
-			fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_BGR24;
-			ret = vidioc_s_fmt_vid_cap(file, priv, &fmt);
-			if (ret != 0)
-				return ret;
-		}
-		{
-			struct v4l2_requestbuffers rb;
-
-			memset(&rb, 0, sizeof rb);
-			rb.count = 4;
-			rb.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			rb.memory = V4L2_MEMORY_MMAP;
-			ret = vidioc_reqbufs(file, priv, &rb);
-			if (ret != 0)
-				return ret;
-		}
-	}
-	mbuf->frames = gspca_dev->nframes;
-	mbuf->size = gspca_dev->frsz * gspca_dev->nframes;
-	for (i = 0; i < mbuf->frames; i++)
-		mbuf->offsets[i] = gspca_dev->frame[i].v4l2_buf.m.offset;
-	return 0;
-}
-#endif
-
 static int dev_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct gspca_dev *gspca_dev = file->private_data;
@@ -1838,12 +1733,7 @@ static int dev_mmap(struct file *file, struct vm_area_struct *vma)
 		ret = -EINVAL;
 		goto out;
 	}
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/* v4l1 maps all the buffers */
-	if (i != 0
-	    || size != frame->v4l2_buf.length * gspca_dev->nframes)
-#endif
-	    if (size != frame->v4l2_buf.length) {
+	if (size != frame->v4l2_buf.length) {
 		PDEBUG(D_STREAM, "mmap bad size");
 		ret = -EINVAL;
 		goto out;
@@ -1883,21 +1773,17 @@ out:
 static int frame_wait(struct gspca_dev *gspca_dev,
 			int nonblock_ing)
 {
-	struct gspca_frame *frame;
-	int i, j, ret;
+	int i, ret;
 
 	/* check if a frame is ready */
 	i = gspca_dev->fr_o;
-	j = gspca_dev->fr_queue[i];
-	frame = &gspca_dev->frame[j];
-
-	if (!(frame->v4l2_buf.flags & V4L2_BUF_FLAG_DONE)) {
+	if (i == atomic_read(&gspca_dev->fr_i)) {
 		if (nonblock_ing)
 			return -EAGAIN;
 
 		/* wait till a frame is ready */
 		ret = wait_event_interruptible_timeout(gspca_dev->wq,
-			(frame->v4l2_buf.flags & V4L2_BUF_FLAG_DONE) ||
+			i != atomic_read(&gspca_dev->fr_i) ||
 			!gspca_dev->streaming || !gspca_dev->present,
 			msecs_to_jiffies(3000));
 		if (ret < 0)
@@ -1906,11 +1792,7 @@ static int frame_wait(struct gspca_dev *gspca_dev,
 			return -EIO;
 	}
 
-	gspca_dev->fr_o = (i + 1) % gspca_dev->nframes;
-	PDEBUG(D_FRAM, "frame wait q:%d i:%d o:%d",
-		gspca_dev->fr_q,
-		gspca_dev->fr_i,
-		gspca_dev->fr_o);
+	gspca_dev->fr_o = (i + 1) % GSPCA_MAX_FRAMES;
 
 	if (gspca_dev->sd_desc->dq_callback) {
 		mutex_lock(&gspca_dev->usb_lock);
@@ -1919,7 +1801,7 @@ static int frame_wait(struct gspca_dev *gspca_dev,
 			gspca_dev->sd_desc->dq_callback(gspca_dev);
 		mutex_unlock(&gspca_dev->usb_lock);
 	}
-	return j;
+	return gspca_dev->fr_queue[i];
 }
 
 /*
@@ -2024,15 +1906,9 @@ static int vidioc_qbuf(struct file *file, void *priv,
 	}
 
 	/* put the buffer in the 'queued' queue */
-	i = gspca_dev->fr_q;
+	i = atomic_read(&gspca_dev->fr_q);
 	gspca_dev->fr_queue[i] = index;
-	if (gspca_dev->fr_i == i)
-		gspca_dev->cur_frame = frame;
-	gspca_dev->fr_q = (i + 1) % gspca_dev->nframes;
-	PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d",
-		gspca_dev->fr_q,
-		gspca_dev->fr_i,
-		gspca_dev->fr_o);
+	atomic_set(&gspca_dev->fr_q, (i + 1) % GSPCA_MAX_FRAMES);
 
 	v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
 	v4l2_buf->flags &= ~V4L2_BUF_FLAG_DONE;
@@ -2088,7 +1964,7 @@ static int read_alloc(struct gspca_dev *gspca_dev,
 static unsigned int dev_poll(struct file *file, poll_table *wait)
 {
 	struct gspca_dev *gspca_dev = file->private_data;
-	int i, ret;
+	int ret;
 
 	PDEBUG(D_FRAM, "poll");
 
@@ -2106,11 +1982,9 @@ static unsigned int dev_poll(struct file *file, poll_table *wait)
 	if (mutex_lock_interruptible(&gspca_dev->queue_lock) != 0)
 		return POLLERR;
 
-	/* check the next incoming buffer */
-	i = gspca_dev->fr_o;
-	i = gspca_dev->fr_queue[i];
-	if (gspca_dev->frame[i].v4l2_buf.flags & V4L2_BUF_FLAG_DONE)
-		ret = POLLIN | POLLRDNORM;	/* something to read */
+	/* check if an image has been received */
+	if (gspca_dev->fr_o != atomic_read(&gspca_dev->fr_i))
+		ret = POLLIN | POLLRDNORM;	/* yes */
 	else
 		ret = 0;
 	mutex_unlock(&gspca_dev->queue_lock);
@@ -2214,9 +2088,6 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_queryctrl	= vidioc_queryctrl,
 	.vidioc_g_ctrl		= vidioc_g_ctrl,
 	.vidioc_s_ctrl		= vidioc_s_ctrl,
-	.vidioc_g_audio		= vidioc_g_audio,
-	.vidioc_s_audio		= vidioc_s_audio,
-	.vidioc_enumaudio	= vidioc_enumaudio,
 	.vidioc_querymenu	= vidioc_querymenu,
 	.vidioc_enum_input	= vidioc_enum_input,
 	.vidioc_g_input		= vidioc_g_input,
@@ -2235,9 +2106,6 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_s_register	= vidioc_s_register,
 #endif
 	.vidioc_g_chip_ident	= vidioc_g_chip_ident,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 };
 
 static struct video_device gspca_template = {
@@ -2253,31 +2121,18 @@ static struct video_device gspca_template = {
  * This function must be called by the sub-driver when it is
  * called for probing a new device.
  */
-int gspca_dev_probe(struct usb_interface *intf,
+int gspca_dev_probe2(struct usb_interface *intf,
 		const struct usb_device_id *id,
 		const struct sd_desc *sd_desc,
 		int dev_size,
 		struct module *module)
 {
-	struct usb_interface_descriptor *interface;
 	struct gspca_dev *gspca_dev;
 	struct usb_device *dev = interface_to_usbdev(intf);
 	int ret;
 
 	PDEBUG(D_PROBE, "probing %04x:%04x", id->idVendor, id->idProduct);
 
-	/* we don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1) {
-		PDEBUG(D_ERR, "Too many config");
-		return -ENODEV;
-	}
-
-	/* the USB video interface must be the first one */
-	interface = &intf->cur_altsetting->desc;
-	if (dev->config->desc.bNumInterfaces != 1 &&
-	    interface->bInterfaceNumber != 0)
-		return -ENODEV;
-
 	/* create the device */
 	if (dev_size < sizeof *gspca_dev)
 		dev_size = sizeof *gspca_dev;
@@ -2293,8 +2148,26 @@ int gspca_dev_probe(struct usb_interface *intf,
 		goto out;
 	}
 	gspca_dev->dev = dev;
-	gspca_dev->iface = interface->bInterfaceNumber;
+	gspca_dev->iface = intf->cur_altsetting->desc.bInterfaceNumber;
 	gspca_dev->nbalt = intf->num_altsetting;
+
+	/* check if any audio device */
+	if (dev->config->desc.bNumInterfaces != 1) {
+		int i;
+		struct usb_interface *intf2;
+
+		for (i = 0; i < dev->config->desc.bNumInterfaces; i++) {
+			intf2 = dev->config->interface[i];
+			if (intf2 != NULL
+			 && intf2->altsetting != NULL
+			 && intf2->altsetting->desc.bInterfaceClass ==
+					 USB_CLASS_AUDIO) {
+				gspca_dev->audio = 1;
+				break;
+			}
+		}
+	}
+
 	gspca_dev->sd_desc = sd_desc;
 	gspca_dev->nbufread = 2;
 	gspca_dev->empty_packet = -1;	/* don't check the empty packets */
@@ -2345,6 +2218,31 @@ out:
 	kfree(gspca_dev);
 	return ret;
 }
+EXPORT_SYMBOL(gspca_dev_probe2);
+
+/* same function as the previous one, but check the interface */
+int gspca_dev_probe(struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct sd_desc *sd_desc,
+		int dev_size,
+		struct module *module)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+
+	/* we don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1) {
+		PDEBUG(D_ERR, "%04x:%04x too many config",
+				id->idVendor, id->idProduct);
+		return -ENODEV;
+	}
+
+	/* the USB video interface must be the first one */
+	if (dev->config->desc.bNumInterfaces != 1
+	 && intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	return gspca_dev_probe2(intf, id, sd_desc, dev_size, module);
+}
 EXPORT_SYMBOL(gspca_dev_probe);
 
 /*
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 8b963dfae86..b749c36d9f7 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -7,7 +7,6 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/mutex.h>
-#include <linux/slab.h>
 
 /* compilation option */
 #define GSPCA_DEBUG 1
@@ -148,7 +147,6 @@ enum gspca_packet_type {
 
 struct gspca_frame {
 	__u8 *data;			/* frame buffer */
-	__u8 *data_end;			/* end of frame while filling */
 	int vma_use_count;
 	struct v4l2_buffer v4l2_buf;
 };
@@ -177,13 +175,14 @@ struct gspca_dev {
 
 	__u8 *frbuf;				/* buffer for nframes */
 	struct gspca_frame frame[GSPCA_MAX_FRAMES];
-	struct gspca_frame *cur_frame;		/* frame beeing filled */
+	u8 *image;				/* image beeing filled */
 	__u32 frsz;				/* frame size */
-	char nframes;				/* number of frames */
-	char fr_i;				/* frame being filled */
-	char fr_q;				/* next frame to queue */
-	char fr_o;				/* next frame to dequeue */
+	u32 image_len;				/* current length of image */
+	atomic_t fr_q;				/* next frame to queue */
+	atomic_t fr_i;				/* frame being filled */
 	signed char fr_queue[GSPCA_MAX_FRAMES];	/* frame queue */
+	char nframes;				/* number of frames */
+	u8 fr_o;				/* next frame to dequeue */
 	__u8 last_packet_type;
 	__s8 empty_packet;		/* if (-1) don't check empty packets */
 	__u8 streaming;
@@ -199,6 +198,7 @@ struct gspca_dev {
 	struct mutex read_lock;		/* read protection */
 	struct mutex queue_lock;	/* ISOC queue protection */
 	int usb_err;			/* USB error - protected by usb_lock */
+	u16 pkt_size;			/* ISOC packet size */
 #ifdef CONFIG_PM
 	char frozen;			/* suspend - resume */
 #endif
@@ -209,7 +209,7 @@ struct gspca_dev {
 	__u8 iface;			/* USB interface number */
 	__u8 alt;			/* USB alternate setting */
 	__u8 nbalt;			/* number of USB alternate settings */
-	u16 pkt_size;			/* ISOC packet size */
+	u8 audio;			/* presence of audio device */
 };
 
 int gspca_dev_probe(struct usb_interface *intf,
@@ -217,12 +217,16 @@ int gspca_dev_probe(struct usb_interface *intf,
 		const struct sd_desc *sd_desc,
 		int dev_size,
 		struct module *module);
+int gspca_dev_probe2(struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct sd_desc *sd_desc,
+		int dev_size,
+		struct module *module);
 void gspca_disconnect(struct usb_interface *intf);
 void gspca_frame_add(struct gspca_dev *gspca_dev,
 			enum gspca_packet_type packet_type,
 			const u8 *data,
 			int len);
-struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev);
 #ifdef CONFIG_PM
 int gspca_suspend(struct usb_interface *intf, pm_message_t message);
 int gspca_resume(struct usb_interface *intf);
diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index 84ecd56c647..12d9cf4caba 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -50,7 +50,7 @@ struct sd {
 	struct workqueue_struct *work_thread;
 	u8 quality;				 /* image quality */
 	u8 jpegqual;				/* webcam quality */
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 	struct jlj_command {
@@ -282,7 +282,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	destroy_workqueue(dev->work_thread);
 	dev->work_thread = NULL;
 	mutex_lock(&gspca_dev->usb_lock);
-	kfree(dev->jpeg_hdr);
 }
 
 /* this function is called at probe and resume time */
@@ -298,9 +297,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int ret;
 
 	/* create the JPEG header */
-	dev->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (dev->jpeg_hdr == NULL)
-		return -ENOMEM;
 	jpeg_define(dev->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);          /* JPEG 422 */
 	jpeg_set_qual(dev->jpeg_hdr, dev->quality);
diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h
index 1127a405c9b..51af3ee3ab8 100644
--- a/drivers/media/video/gspca/m5602/m5602_bridge.h
+++ b/drivers/media/video/gspca/m5602/m5602_bridge.h
@@ -19,6 +19,7 @@
 #ifndef M5602_BRIDGE_H_
 #define M5602_BRIDGE_H_
 
+#include <linux/slab.h>
 #include "gspca.h"
 
 #define MODULE_NAME "ALi m5602"
diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c
index 4294c75e3b1..b073d66acd0 100644
--- a/drivers/media/video/gspca/m5602/m5602_core.c
+++ b/drivers/media/video/gspca/m5602/m5602_core.c
@@ -305,30 +305,23 @@ static void m5602_urb_complete(struct gspca_dev *gspca_dev,
 		       sd->frame_count);
 
 	} else {
-		struct gspca_frame *frame;
 		int cur_frame_len;
 
-		frame = gspca_get_i_frame(gspca_dev);
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-
-		cur_frame_len = frame->data_end - frame->data;
+		cur_frame_len = gspca_dev->image_len;
 		/* Remove urb header */
 		data += 4;
 		len -= 4;
 
-		if (cur_frame_len + len <= frame->v4l2_buf.length) {
+		if (cur_frame_len + len <= gspca_dev->frsz) {
 			PDEBUG(D_FRAM, "Continuing frame %d copying %d bytes",
 			       sd->frame_count, len);
 
 			gspca_frame_add(gspca_dev, INTER_PACKET,
 					data, len);
-		} else if (frame->v4l2_buf.length - cur_frame_len > 0) {
+		} else {
 			/* Add the remaining data up to frame size */
 			gspca_frame_add(gspca_dev, INTER_PACKET, data,
-				    frame->v4l2_buf.length - cur_frame_len);
+				    gspca_dev->frsz - cur_frame_len);
 		}
 	}
 }
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
index 6b3be4fa2c0..fbd91545497 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/kthread.h>
-#include <linux/slab.h>
 #include "m5602_s5k83a.h"
 
 static int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val);
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 3d9229e22b2..031f7195ce0 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -41,7 +41,7 @@ struct sd {
 #define QUALITY_MAX 70
 #define QUALITY_DEF 50
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
@@ -200,9 +200,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int i;
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -317,13 +314,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		PDEBUG(D_ERR, "Camera Stop failed");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	kfree(sd->jpeg_hdr);
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -486,7 +476,6 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
 	.get_jcomp = sd_get_jcomp,
 	.set_jcomp = sd_set_jcomp,
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index f36e11a0458..2b2cbdbf03f 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -41,6 +41,11 @@
 #include <linux/input.h>
 #include "gspca.h"
 
+/* The jpeg_hdr is used by w996Xcf only */
+/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */
+#define CONEX_CAM
+#include "jpeg.h"
+
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("OV519 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -90,6 +95,7 @@ struct sd {
 #define QUALITY_DEF 50
 
 	__u8 stopped;		/* Streaming is temporarily paused */
+	__u8 first_frame;
 
 	__u8 frame_rate;	/* current Framerate */
 	__u8 clockdiv;		/* clockdiv override */
@@ -115,7 +121,7 @@ struct sd {
 	int sensor_height;
 	int sensor_reg_cache[256];
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* Note this is a bit of a hack, but the w9968cf driver needs the code for all
@@ -3147,7 +3153,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->autobrightness = AUTOBRIGHT_DEF;
 	if (sd->sensor == SEN_OV7670) {
 		sd->freq = OV7670_FREQ_DEF;
-		gspca_dev->ctrl_dis = 1 << FREQ_IDX;
+		gspca_dev->ctrl_dis = (1 << FREQ_IDX) | (1 << COLOR_IDX);
 	} else {
 		sd->freq = FREQ_DEF;
 		gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) |
@@ -3961,6 +3967,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	sd_reset_snapshot(gspca_dev);
 	sd->snapshot_pressed = 0;
 
+	sd->first_frame = 3;
+
 	ret = ov51x_restart(sd);
 	if (ret < 0)
 		goto out;
@@ -4153,13 +4161,23 @@ static void ovfx2_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+
 	/* A short read signals EOF */
 	if (len < OVFX2_BULK_SIZE) {
-		gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+		/* If the frame is short, and it is one of the first ones
+		   the sensor and bridge are still syncing, so drop it. */
+		if (sd->first_frame) {
+			sd->first_frame--;
+			if (gspca_dev->image_len <
+				  sd->gspca_dev.width * sd->gspca_dev.height)
+				gspca_dev->last_packet_type = DISCARD_PACKET;
+		}
+		gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 		gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
-		return;
 	}
-	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index dc1e4efe30f..96cb3a97658 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -987,13 +987,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 					data + 12, len - 12);
 		/* If this packet is marked as EOF, end the frame */
 		} else if (data[1] & UVC_STREAM_EOF) {
-			struct gspca_frame *frame;
-
 			sd->last_pts = 0;
-			frame = gspca_get_i_frame(gspca_dev);
-			if (frame == NULL)
-				goto discard;
-			if (frame->data_end - frame->data + (len - 12) !=
+			if (gspca_dev->image_len + len - 12 !=
 			    gspca_dev->width * gspca_dev->height * 2) {
 				PDEBUG(D_PACK, "wrong sized frame");
 				goto discard;
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
index 2a68220d1ad..a66df07d762 100644
--- a/drivers/media/video/gspca/pac7302.c
+++ b/drivers/media/video/gspca/pac7302.c
@@ -402,7 +402,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 	memcpy(gspca_dev->usb_buf, buffer, len);
 	ret = usb_control_msg(gspca_dev->dev,
 			usb_sndctrlpipe(gspca_dev->dev, 0),
-			1,		/* request */
+			0,		/* request */
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0,		/* value */
 			index, gspca_dev->usb_buf, len,
@@ -804,7 +804,6 @@ static const unsigned char pac_jpeg_header2[] = {
 };
 
 static void pac_start_frame(struct gspca_dev *gspca_dev,
-		struct gspca_frame *frame,
 		__u16 lines, __u16 samples_per_line)
 {
 	unsigned char tmpbuf[4];
@@ -829,19 +828,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			int len)			/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct gspca_frame *frame;
+	u8 *image;
 	unsigned char *sof;
 
 	sof = pac_find_sof(&sd->sof_read, data, len);
 	if (sof) {
 		int n, lum_offset, footer_length;
 
-		frame = gspca_get_i_frame(gspca_dev);
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-
 		/* 6 bytes after the FF D9 EOF marker a number of lumination
 		   bytes are send corresponding to different parts of the
 		   image, the 14th and 15th byte after the EOF seem to
@@ -852,16 +845,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		/* Finish decoding current frame */
 		n = (sof - data) - (footer_length + sizeof pac_sof_marker);
 		if (n < 0) {
-			frame->data_end += n;
+			gspca_dev->image_len += n;
 			n = 0;
+		} else {
+			gspca_frame_add(gspca_dev, INTER_PACKET, data, n);
 		}
-		gspca_frame_add(gspca_dev, INTER_PACKET,
-					data, n);
-		if (gspca_dev->last_packet_type != DISCARD_PACKET &&
-				frame->data_end[-2] == 0xff &&
-				frame->data_end[-1] == 0xd9)
-			gspca_frame_add(gspca_dev, LAST_PACKET,
-						NULL, 0);
+
+		image = gspca_dev->image;
+		if (image != NULL
+		 && image[gspca_dev->image_len - 2] == 0xff
+		 && image[gspca_dev->image_len - 1] == 0xd9)
+			gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 
 		n = sof - data;
 		len -= n;
@@ -877,7 +871,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
 		/* Start the new frame with the jpeg header */
 		/* The PAC7302 has the image rotated 90 degrees */
-		pac_start_frame(gspca_dev, frame,
+		pac_start_frame(gspca_dev,
 			gspca_dev->width, gspca_dev->height);
 	}
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
@@ -1200,6 +1194,7 @@ static const struct usb_device_id device_table[] __devinitconst = {
 	{USB_DEVICE(0x093a, 0x2621)},
 	{USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP},
 	{USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP},
+	{USB_DEVICE(0x093a, 0x2625)},
 	{USB_DEVICE(0x093a, 0x2626)},
 	{USB_DEVICE(0x093a, 0x2628)},
 	{USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP},
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 44fed968672..1cb7e99e92b 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -270,7 +270,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 	memcpy(gspca_dev->usb_buf, buffer, len);
 	ret = usb_control_msg(gspca_dev->dev,
 			usb_sndctrlpipe(gspca_dev->dev, 0),
-			1,		/* request */
+			0,		/* request */
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0,		/* value */
 			index, gspca_dev->usb_buf, len,
@@ -599,7 +599,6 @@ static const unsigned char pac_jpeg_header2[] = {
 };
 
 static void pac_start_frame(struct gspca_dev *gspca_dev,
-		struct gspca_frame *frame,
 		__u16 lines, __u16 samples_per_line)
 {
 	unsigned char tmpbuf[4];
@@ -624,19 +623,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			int len)			/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	u8 *image;
 	unsigned char *sof;
-	struct gspca_frame *frame;
 
 	sof = pac_find_sof(&sd->sof_read, data, len);
 	if (sof) {
 		int n, lum_offset, footer_length;
 
-		frame = gspca_get_i_frame(gspca_dev);
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-
 		/* 6 bytes after the FF D9 EOF marker a number of lumination
 		   bytes are send corresponding to different parts of the
 		   image, the 14th and 15th byte after the EOF seem to
@@ -647,16 +640,16 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		/* Finish decoding current frame */
 		n = (sof - data) - (footer_length + sizeof pac_sof_marker);
 		if (n < 0) {
-			frame->data_end += n;
+			gspca_dev->image_len += n;
 			n = 0;
+		} else {
+			gspca_frame_add(gspca_dev, INTER_PACKET, data, n);
 		}
-		gspca_frame_add(gspca_dev, INTER_PACKET,
-					data, n);
-		if (gspca_dev->last_packet_type != DISCARD_PACKET &&
-				frame->data_end[-2] == 0xff &&
-				frame->data_end[-1] == 0xd9)
-			gspca_frame_add(gspca_dev, LAST_PACKET,
-						NULL, 0);
+		image = gspca_dev->image;
+		if (image != NULL
+		 && image[gspca_dev->image_len - 2] == 0xff
+		 && image[gspca_dev->image_len - 1] == 0xd9)
+			gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 
 		n = sof - data;
 		len -= n;
@@ -671,7 +664,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			atomic_set(&sd->avg_lum, -1);
 
 		/* Start the new frame with the jpeg header */
-		pac_start_frame(gspca_dev, frame,
+		pac_start_frame(gspca_dev,
 			gspca_dev->height, gspca_dev->width);
 	}
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 644a7fd4701..83a718f0f3f 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -20,7 +20,6 @@
 
 #ifdef CONFIG_INPUT
 #include <linux/input.h>
-#include <linux/slab.h>
 #endif
 
 #include "gspca.h"
@@ -89,7 +88,7 @@ struct sd {
 	u8 hstart;
 	u8 vstart;
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 	u8 quality;
 
 	u8 flags;
@@ -2162,10 +2161,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int height = gspca_dev->height;
 	u8 fmt, scale = 0;
 
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (sd->jpeg_hdr == NULL)
-		return -ENOMEM;
-
 	jpeg_define(sd->jpeg_hdr, height, width,
 			0x21);
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -2197,8 +2192,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	}
 
 	configure_sensor_output(gspca_dev, mode);
-	reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
-	reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+	reg_w(gspca_dev, 0x1100, &sd->jpeg_hdr[JPEG_QT0_OFFSET], 64);
+	reg_w(gspca_dev, 0x1140, &sd->jpeg_hdr[JPEG_QT1_OFFSET], 64);
 	reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
 	reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
 	reg_w1(gspca_dev, 0x1189, scale);
@@ -2226,12 +2221,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	kfree(sd->jpeg_hdr);
-}
-
 static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -2397,7 +2386,6 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
 #ifdef CONFIG_INPUT
 	.int_pkt_scan = sd_int_pkt_scan,
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 785eeb4c201..204bb3af455 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1251,16 +1251,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
 		/* In raw mode we sometimes get some garbage after the frame
 		   ignore this */
-		struct gspca_frame *frame;
 		int used;
 		int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
 
-		frame = gspca_get_i_frame(gspca_dev);
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-		used = frame->data_end - frame->data;
+		used = gspca_dev->image_len;
 		if (used + len > size)
 			len = size - used;
 	}
@@ -1453,9 +1447,7 @@ static const struct usb_device_id device_table[] __devinitconst = {
 	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
 	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
-#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
-#endif
 	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index bb923efb75b..ee17b034bf6 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -22,7 +22,6 @@
 #define MODULE_NAME "sonixj"
 
 #include <linux/input.h>
-#include <linux/slab.h>
 #include "gspca.h"
 #include "jpeg.h"
 
@@ -392,7 +391,7 @@ static const u8 sn_gc0307[0x1c] = {
 
 static const u8 sn_hv7131[0x1c] = {
 /*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
-	0x00,	0x03,	0x64,	0x00,	0x1a,	0x20,	0x20,	0x20,
+	0x00,	0x03,	0x60,	0x00,	0x1a,	0x20,	0x20,	0x20,
 /*	reg8	reg9	rega	regb	regc	regd	rege	regf */
 	0x81,	0x11,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
 /*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
@@ -403,7 +402,7 @@ static const u8 sn_hv7131[0x1c] = {
 
 static const u8 sn_mi0360[0x1c] = {
 /*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
-	0x00,	0x61,	0x44,	0x00,	0x1a,	0x20,	0x20,	0x20,
+	0x00,	0x61,	0x40,	0x00,	0x1a,	0x20,	0x20,	0x20,
 /*	reg8	reg9	rega	regb	regc	regd	rege	regf */
 	0x81,	0x5d,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
 /*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
@@ -1644,6 +1643,7 @@ static void bridge_init(struct gspca_dev *gspca_dev,
 			  const u8 *sn9c1xx)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	u8 reg0102[2];
 	const u8 *reg9a;
 	static const u8 reg9a_def[] =
 		{0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
@@ -1656,7 +1656,11 @@ static void bridge_init(struct gspca_dev *gspca_dev,
 	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 
 	/* configure gpio */
-	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
+	reg0102[0] = sn9c1xx[1];
+	reg0102[1] = sn9c1xx[2];
+	if (gspca_dev->audio)
+		reg0102[1] |= 0x04;	/* keep the audio connection */
+	reg_w(gspca_dev, 0x01, reg0102, 2);
 	reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
 	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
 	switch (sd->sensor) {
@@ -1737,13 +1741,12 @@ static void bridge_init(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x01, 0x40);
 		break;
 	case SENSOR_PO2030N:
+	case SENSOR_OV7660:
 		reg_w1(gspca_dev, 0x01, 0x63);
 		reg_w1(gspca_dev, 0x17, 0x20);
 		reg_w1(gspca_dev, 0x01, 0x62);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
-	case SENSOR_OV7660:
-		/* fall thru */
 	case SENSOR_SP80708:
 		reg_w1(gspca_dev, 0x01, 0x63);
 		reg_w1(gspca_dev, 0x17, 0x20);
@@ -1816,7 +1819,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	const u8 *sn9c1xx;
-	u8 regGpio[] = { 0x29, 0x74 };
+	u8 regGpio[] = { 0x29, 0x74 };		/* with audio */
 	u8 regF1;
 
 	/* setup a selector by bridge */
@@ -1856,7 +1859,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			po2030n_probe(gspca_dev);
 			break;
 		}
-		regGpio[1] = 0x70;
+		regGpio[1] = 0x70;		/* no audio */
 		reg_w(gspca_dev, 0x01, regGpio, 2);
 		break;
 	default:
@@ -2274,7 +2277,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
-	u8 reg1, reg2, reg17;
+	u8 reg1, reg17;
 	const u8 *sn9c1xx;
 	const u8 (*init)[8];
 	int mode;
@@ -2304,23 +2307,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	/* initialize the sensor */
 	i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
 
-	switch (sd->sensor) {
-	case SENSOR_ADCM1700:
-		reg2 = 0x60;
-		break;
-	case SENSOR_OM6802:
-		reg2 = 0x71;
-		break;
-	case SENSOR_SP80708:
-		reg2 = 0x62;
-		break;
-	default:
-		reg2 = 0x40;
-		break;
-	}
-	reg_w1(gspca_dev, 0x02, reg2);
-	reg_w1(gspca_dev, 0x02, reg2);
-
 	reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
 	reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
 	reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
@@ -3022,16 +3008,18 @@ static const __devinitdata struct usb_device_id device_table[] = {
 /*	{USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */
 /*	{USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */
 /*	{USB_DEVICE(0x0c45, 0x60cc), BS(SN9C105, HV7131GP)}, */
+	{USB_DEVICE(0x0c45, 0x60ce), BS(SN9C105, SP80708)},
 	{USB_DEVICE(0x0c45, 0x60ec), BS(SN9C105, MO4000)},
 /*	{USB_DEVICE(0x0c45, 0x60ef), BS(SN9C105, ICM105C)}, */
 /*	{USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */
+/*	{USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */
 	{USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)},
 	{USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)},
 #endif
 	{USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)},	/*sn9c128*/
-/*	{USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, P1030xC)}, */
+/*	{USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, PO2030N)}, * / GC0305*/
 /*	{USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */
 	{USB_DEVICE(0x0c45, 0x610a), BS(SN9C120, OV7648)},	/*sn9c128*/
 	{USB_DEVICE(0x0c45, 0x610b), BS(SN9C120, OV7660)},	/*sn9c128*/
@@ -3058,6 +3046,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)},
 	{USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)},
 	{USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)},	/*sn9c120b*/
+						/* or GC0305 / GC0307 */
 	{USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)},	/*sn9c120b*/
 	{USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)},	/*sn9c120b*/
 	{USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)},	/*sn9c120b*/
diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/video/gspca/spca1528.c
new file mode 100644
index 00000000000..3f514eb1d99
--- /dev/null
+++ b/drivers/media/video/gspca/spca1528.c
@@ -0,0 +1,605 @@
+/*
+ * spca1528 subdriver
+ *
+ * Copyright (C) 2010 Jean-Francois Moine (http://moinejf.free.fr)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "spca1528"
+
+#include "gspca.h"
+#include "jpeg.h"
+
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
+MODULE_DESCRIPTION("SPCA1528 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+
+	u8 brightness;
+	u8 contrast;
+	u8 hue;
+	u8 color;
+	u8 sharpness;
+
+	u8 pkt_seq;
+
+	u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+
+/* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcolor(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcolor(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+
+static const struct ctrl sd_ctrls[] = {
+	{
+	    {
+		.id      = V4L2_CID_BRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Brightness",
+		.minimum = 0,
+		.maximum = 255,
+		.step    = 1,
+#define BRIGHTNESS_DEF 128
+		.default_value = BRIGHTNESS_DEF,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+	    {
+		.id      = V4L2_CID_CONTRAST,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Contrast",
+		.minimum = 0,
+		.maximum = 8,
+		.step    = 1,
+#define CONTRAST_DEF 1
+		.default_value = CONTRAST_DEF,
+	    },
+	    .set = sd_setcontrast,
+	    .get = sd_getcontrast,
+	},
+	{
+	    {
+		.id      = V4L2_CID_HUE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Hue",
+		.minimum = 0,
+		.maximum = 255,
+		.step    = 1,
+#define HUE_DEF 0
+		.default_value = HUE_DEF,
+	    },
+	    .set = sd_sethue,
+	    .get = sd_gethue,
+	},
+	{
+	    {
+		.id      = V4L2_CID_SATURATION,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Saturation",
+		.minimum = 0,
+		.maximum = 8,
+		.step    = 1,
+#define COLOR_DEF 1
+		.default_value = COLOR_DEF,
+	    },
+	    .set = sd_setcolor,
+	    .get = sd_getcolor,
+	},
+	{
+	    {
+		.id	 = V4L2_CID_SHARPNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Sharpness",
+		.minimum = 0,
+		.maximum = 255,
+		.step    = 1,
+#define SHARPNESS_DEF 0
+		.default_value = SHARPNESS_DEF,
+	    },
+	    .set = sd_setsharpness,
+	    .get = sd_getsharpness,
+	},
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+/*		(does not work correctly)
+	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144 * 5 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
+*/
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 4 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+};
+
+/* read <len> bytes to gspca usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev,
+			u8 req,
+			u16 index,
+			int len)
+{
+#if USB_BUF_SZ < 64
+#error "USB buffer too small"
+#endif
+	struct usb_device *dev = gspca_dev->dev;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			req,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0x0000,			/* value */
+			index,
+			gspca_dev->usb_buf, len,
+			500);
+	PDEBUG(D_USBI, "GET %02x 0000 %04x %02x", req, index,
+			 gspca_dev->usb_buf[0]);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_r err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void reg_w(struct gspca_dev *gspca_dev,
+			u8 req,
+			u16 value,
+			u16 index)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	PDEBUG(D_USBO, "SET %02x %04x %04x", req, value, index);
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			req,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index,
+			NULL, 0, 500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void reg_wb(struct gspca_dev *gspca_dev,
+			u8 req,
+			u16 value,
+			u16 index,
+			u8 byte)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	PDEBUG(D_USBO, "SET %02x %04x %04x %02x", req, value, index, byte);
+	gspca_dev->usb_buf[0] = byte;
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			req,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index,
+			gspca_dev->usb_buf, 1, 500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void wait_status_0(struct gspca_dev *gspca_dev)
+{
+	int i;
+
+	i = 20;
+	do {
+		reg_r(gspca_dev, 0x21, 0x0000, 1);
+		if (gspca_dev->usb_buf[0] == 0)
+			return;
+		msleep(30);
+	} while (--i > 0);
+	PDEBUG(D_ERR, "wait_status_0 timeout");
+	gspca_dev->usb_err = -ETIME;
+}
+
+static void wait_status_1(struct gspca_dev *gspca_dev)
+{
+	int i;
+
+	i = 10;
+	do {
+		reg_r(gspca_dev, 0x21, 0x0001, 1);
+		msleep(10);
+		if (gspca_dev->usb_buf[0] == 1) {
+			reg_wb(gspca_dev, 0x21, 0x0000, 0x0001, 0x00);
+			reg_r(gspca_dev, 0x21, 0x0001, 1);
+			return;
+		}
+	} while (--i > 0);
+	PDEBUG(D_ERR, "wait_status_1 timeout");
+	gspca_dev->usb_err = -ETIME;
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	reg_wb(gspca_dev, 0xc0, 0x0000, 0x00c0, sd->brightness);
+}
+
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	reg_wb(gspca_dev, 0xc1, 0x0000, 0x00c1, sd->contrast);
+}
+
+static void sethue(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	reg_wb(gspca_dev, 0xc2, 0x0000, 0x0000, sd->hue);
+}
+
+static void setcolor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	reg_wb(gspca_dev, 0xc3, 0x0000, 0x00c3, sd->color);
+}
+
+static void setsharpness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	reg_wb(gspca_dev, 0xc4, 0x0000, 0x00c4, sd->sharpness);
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dev->cam.cam_mode = vga_mode;
+	gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+	gspca_dev->cam.npkt = 128; /* number of packets per ISOC message */
+			/*fixme: 256 in ms-win traces*/
+
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->hue = HUE_DEF;
+	sd->color = COLOR_DEF;
+	sd->sharpness = SHARPNESS_DEF;
+
+	gspca_dev->nbalt = 4;		/* use alternate setting 3 */
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	reg_w(gspca_dev, 0x00, 0x0001, 0x2067);
+	reg_w(gspca_dev, 0x00, 0x00d0, 0x206b);
+	reg_w(gspca_dev, 0x00, 0x0000, 0x206c);
+	reg_w(gspca_dev, 0x00, 0x0001, 0x2069);
+	msleep(8);
+	reg_w(gspca_dev, 0x00, 0x00c0, 0x206b);
+	reg_w(gspca_dev, 0x00, 0x0000, 0x206c);
+	reg_w(gspca_dev, 0x00, 0x0001, 0x2069);
+
+	reg_r(gspca_dev, 0x20, 0x0000, 1);
+	reg_r(gspca_dev, 0x20, 0x0000, 5);
+	reg_r(gspca_dev, 0x23, 0x0000, 64);
+	PDEBUG(D_PROBE, "%s%s", &gspca_dev->usb_buf[0x1c],
+				&gspca_dev->usb_buf[0x30]);
+	reg_r(gspca_dev, 0x23, 0x0001, 64);
+	return gspca_dev->usb_err;
+}
+
+/* function called at start time before URB creation */
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	u8 mode;
+
+	reg_r(gspca_dev, 0x00, 0x2520, 1);
+	wait_status_0(gspca_dev);
+	reg_w(gspca_dev, 0xc5, 0x0003, 0x0000);
+	wait_status_1(gspca_dev);
+
+	wait_status_0(gspca_dev);
+	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+	reg_wb(gspca_dev, 0x25, 0x0000, 0x0004, mode);
+	reg_r(gspca_dev, 0x25, 0x0004, 1);
+	reg_wb(gspca_dev, 0x27, 0x0000, 0x0000, 0x06);
+	reg_r(gspca_dev, 0x27, 0x0000, 1);
+	return gspca_dev->usb_err;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	/* initialize the JPEG header */
+	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
+			0x22);		/* JPEG 411 */
+
+	/* the JPEG quality seems to be 82% */
+	jpeg_set_qual(sd->jpeg_hdr, 82);
+
+	/* set the controls */
+	setbrightness(gspca_dev);
+	setcontrast(gspca_dev);
+	sethue(gspca_dev);
+	setcolor(gspca_dev);
+	setsharpness(gspca_dev);
+
+	msleep(5);
+	reg_r(gspca_dev, 0x00, 0x2520, 1);
+	msleep(8);
+
+	/* start the capture */
+	wait_status_0(gspca_dev);
+	reg_w(gspca_dev, 0x31, 0x0000, 0x0004);
+	wait_status_1(gspca_dev);
+	wait_status_0(gspca_dev);
+	msleep(200);
+
+	sd->pkt_seq = 0;
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	/* stop the capture */
+	wait_status_0(gspca_dev);
+	reg_w(gspca_dev, 0x31, 0x0000, 0x0000);
+	wait_status_1(gspca_dev);
+	wait_status_0(gspca_dev);
+}
+
+/* move a packet adding 0x00 after 0xff */
+static void add_packet(struct gspca_dev *gspca_dev,
+			u8 *data,
+			int len)
+{
+	int i;
+
+	i = 0;
+	do {
+		if (data[i] == 0xff) {
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data, i + 1);
+			len -= i;
+			data += i;
+			*data = 0x00;
+			i = 0;
+		}
+	} while (++i < len);
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	static const u8 ffd9[] = {0xff, 0xd9};
+
+	/* image packets start with:
+	 *	02 8n
+	 * with <n> bit:
+	 *	0x01: even (0) / odd (1) image
+	 *	0x02: end of image when set
+	 */
+	if (len < 3)
+		return;				/* empty packet */
+	if (*data == 0x02) {
+		if (data[1] & 0x02) {
+			sd->pkt_seq = !(data[1] & 1);
+			add_packet(gspca_dev, data + 2, len - 2);
+			gspca_frame_add(gspca_dev, LAST_PACKET,
+					ffd9, 2);
+			return;
+		}
+		if ((data[1] & 1) != sd->pkt_seq)
+			goto err;
+		if (gspca_dev->last_packet_type == LAST_PACKET)
+			gspca_frame_add(gspca_dev, FIRST_PACKET,
+					sd->jpeg_hdr, JPEG_HDR_SZ);
+		add_packet(gspca_dev, data + 2, len - 2);
+		return;
+	}
+err:
+	gspca_dev->last_packet_type = DISCARD_PACKET;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->brightness = val;
+	if (gspca_dev->streaming)
+		setbrightness(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->brightness;
+	return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->contrast = val;
+	if (gspca_dev->streaming)
+		setcontrast(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->contrast;
+	return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hue = val;
+	if (gspca_dev->streaming)
+		sethue(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->hue;
+	return 0;
+}
+
+static int sd_setcolor(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->color = val;
+	if (gspca_dev->streaming)
+		setcolor(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getcolor(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->color;
+	return 0;
+}
+
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->sharpness = val;
+	if (gspca_dev->streaming)
+		setsharpness(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->sharpness;
+	return 0;
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.isoc_init = sd_isoc_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x04fc, 0x1528)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	/* the video interface for isochronous transfer is 1 */
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 1)
+		return -ENODEV;
+
+	return gspca_dev_probe2(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index b866c73c97d..c02beb6c1e9 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -57,7 +57,7 @@ struct sd {
 #define PalmPixDC85 13
 #define ToptroIndus 14
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
@@ -669,9 +669,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	__u8 xmult, ymult;
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -891,13 +888,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		gspca_dev->usb_buf[0]);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	kfree(sd->jpeg_hdr);
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -1055,7 +1045,6 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
 	.get_jcomp = sd_get_jcomp,
 	.set_jcomp = sd_set_jcomp,
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
new file mode 100644
index 00000000000..37cee5e063c
--- /dev/null
+++ b/drivers/media/video/gspca/sq930x.c
@@ -0,0 +1,1402 @@
+/*
+ * SQ930x subdriver
+ *
+ * Copyright (C) 2010 Jean-François Moine <http://moinejf.free.fr>
+ * Copyright (C) 2006 -2008 Gerard Klaver <gerard at gkall dot hobby dot nl>
+ * Copyright (C) 2007 Sam Revitch <samr7@cs.washington.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "sq930x"
+
+#include "gspca.h"
+#include "jpeg.h"
+
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
+		"Gerard Klaver <gerard at gkall dot hobby dot nl\n"
+		"Sam Revitch <samr7@cs.washington.edu>");
+MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define BULK_TRANSFER_LEN 5128
+
+/* Structure to hold all of our device specific stuff */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+
+	u16 expo;
+	u8 gain;
+
+	u8 quality;		/* webcam quality 0..3 */
+#define QUALITY_DEF 1
+
+	u8 gpio[2];
+
+	u8 eof_len;
+	u8 do_ctrl;
+
+	u8 sensor;
+enum {
+	SENSOR_ICX098BQ,
+	SENSOR_LZ24BP,
+	SENSOR_MI0360,
+	SENSOR_MT9V111,
+	SENSOR_OV7660,
+	SENSOR_OV9630,
+} sensors;
+	u8 type;
+#define Generic 0
+#define Creative_live_motion 1
+
+	u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+
+static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+
+static const struct ctrl sd_ctrls[] = {
+	{
+	    {
+		.id = V4L2_CID_EXPOSURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Exposure",
+		.minimum = 0x0001,
+		.maximum = 0x0fff,
+		.step = 1,
+#define EXPO_DEF 0x027d
+		.default_value = EXPO_DEF,
+	    },
+	    .set = sd_setexpo,
+	    .get = sd_getexpo,
+	},
+	{
+	    {
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = 0x01,
+		.maximum = 0xff,
+		.step = 1,
+#define GAIN_DEF 0x61
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+};
+
+static struct v4l2_pix_format vga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 5 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 4 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
+};
+
+/* JPEG quality indexed by webcam quality */
+#define QUAL_0 90
+#define QUAL_1 85
+#define QUAL_2 75
+#define QUAL_3 70
+static const u8 quality_tb[4] = { QUAL_0, QUAL_1, QUAL_2, QUAL_3 };
+
+/* sq930x registers */
+#define SQ930_CTRL_UCBUS_IO	0x0001
+#define SQ930_CTRL_I2C_IO	0x0002
+#define SQ930_CTRL_GPIO		0x0005
+#define SQ930_CTRL_CAP_START	0x0010
+#define SQ930_CTRL_CAP_STOP	0x0011
+#define SQ930_CTRL_SET_EXPOSURE 0x001d
+#define SQ930_CTRL_RESET	0x001e
+#define SQ930_CTRL_GET_DEV_INFO 0x001f
+
+/* gpio 1 (8..15) */
+#define SQ930_GPIO_DFL_I2C_SDA	0x0001
+#define SQ930_GPIO_DFL_I2C_SCL	0x0002
+#define SQ930_GPIO_RSTBAR	0x0004
+#define SQ930_GPIO_EXTRA1	0x0040
+#define SQ930_GPIO_EXTRA2	0x0080
+/* gpio 3 (24..31) */
+#define SQ930_GPIO_POWER	0x0200
+#define SQ930_GPIO_DFL_LED	0x1000
+
+struct ucbus_write_cmd {
+	u16	bw_addr;
+	u8	bw_data;
+};
+struct i2c_write_cmd {
+	u8	reg;
+	u16	val;
+};
+
+static const struct ucbus_write_cmd icx098bq_start_0[] = {
+	{0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xce},
+	{0xf802, 0xc1}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x0e},
+	{0xf80a, 0x01}, {0xf80b, 0xee}, {0xf807, 0x60}, {0xf80c, 0x02},
+	{0xf80d, 0xf0}, {0xf80e, 0x03}, {0xf80f, 0x0a}, {0xf81c, 0x02},
+	{0xf81d, 0xf0}, {0xf81e, 0x03}, {0xf81f, 0x0a}, {0xf83a, 0x00},
+	{0xf83b, 0x10}, {0xf83c, 0x00}, {0xf83d, 0x4e}, {0xf810, 0x04},
+	{0xf811, 0x00}, {0xf812, 0x02}, {0xf813, 0x10}, {0xf803, 0x00},
+	{0xf814, 0x01}, {0xf815, 0x18}, {0xf816, 0x00}, {0xf817, 0x48},
+	{0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c},
+	{0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff},
+	{0xf823, 0x07}, {0xf824, 0xff}, {0xf825, 0x03}, {0xf826, 0xff},
+	{0xf827, 0x06}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff},
+	{0xf82b, 0x0c}, {0xf82c, 0xfd}, {0xf82d, 0x01}, {0xf82e, 0x00},
+	{0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00},
+	{0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24},
+	{0xf854, 0x00}, {0xf855, 0x18}, {0xf856, 0x00}, {0xf857, 0x3c},
+	{0xf858, 0x00}, {0xf859, 0x0c}, {0xf85a, 0x00}, {0xf85b, 0x30},
+	{0xf85c, 0x00}, {0xf85d, 0x0c}, {0xf85e, 0x00}, {0xf85f, 0x30},
+	{0xf860, 0x00}, {0xf861, 0x48}, {0xf862, 0x01}, {0xf863, 0xdc},
+	{0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0},
+	{0xf868, 0xff}, {0xf869, 0x70}, {0xf86c, 0xff}, {0xf86d, 0x00},
+	{0xf86a, 0xff}, {0xf86b, 0x48}, {0xf86e, 0xff}, {0xf86f, 0x00},
+	{0xf870, 0x01}, {0xf871, 0xdb}, {0xf872, 0x01}, {0xf873, 0xfa},
+	{0xf874, 0x01}, {0xf875, 0xdb}, {0xf876, 0x01}, {0xf877, 0xfa},
+	{0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff},
+	{0xf800, 0x03}
+};
+static const struct ucbus_write_cmd icx098bq_start_1[] = {
+	{0xf5f0, 0x00}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xc0},
+	{0xf5f0, 0x49}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xc0},
+	{0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00},
+	{0xf5f9, 0x00}
+};
+
+static const struct ucbus_write_cmd icx098bq_start_2[] = {
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x82}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x40}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xcf}, {0xf806, 0xd0},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03}
+};
+
+static const struct ucbus_write_cmd lz24bp_start_0[] = {
+	{0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xbe},
+	{0xf802, 0xc6}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x06},
+	{0xf80a, 0x01}, {0xf80b, 0xfe}, {0xf807, 0x84}, {0xf80c, 0x02},
+	{0xf80d, 0xf7}, {0xf80e, 0x03}, {0xf80f, 0x0b}, {0xf81c, 0x00},
+	{0xf81d, 0x49}, {0xf81e, 0x03}, {0xf81f, 0x0b}, {0xf83a, 0x00},
+	{0xf83b, 0x01}, {0xf83c, 0x00}, {0xf83d, 0x6b}, {0xf810, 0x03},
+	{0xf811, 0x10}, {0xf812, 0x02}, {0xf813, 0x6f}, {0xf803, 0x00},
+	{0xf814, 0x00}, {0xf815, 0x44}, {0xf816, 0x00}, {0xf817, 0x48},
+	{0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c},
+	{0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff},
+	{0xf823, 0x07}, {0xf824, 0xfd}, {0xf825, 0x07}, {0xf826, 0xf0},
+	{0xf827, 0x0c}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff},
+	{0xf82b, 0x0c}, {0xf82c, 0xfc}, {0xf82d, 0x01}, {0xf82e, 0x00},
+	{0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00},
+	{0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24},
+	{0xf854, 0x00}, {0xf855, 0x0c}, {0xf856, 0x00}, {0xf857, 0x30},
+	{0xf858, 0x00}, {0xf859, 0x18}, {0xf85a, 0x00}, {0xf85b, 0x3c},
+	{0xf85c, 0x00}, {0xf85d, 0x18}, {0xf85e, 0x00}, {0xf85f, 0x3c},
+	{0xf860, 0xff}, {0xf861, 0x37}, {0xf862, 0xff}, {0xf863, 0x1d},
+	{0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0},
+	{0xf868, 0x00}, {0xf869, 0x37}, {0xf86c, 0x02}, {0xf86d, 0x1d},
+	{0xf86a, 0x00}, {0xf86b, 0x37}, {0xf86e, 0x02}, {0xf86f, 0x1d},
+	{0xf870, 0x01}, {0xf871, 0xc6}, {0xf872, 0x02}, {0xf873, 0x04},
+	{0xf874, 0x01}, {0xf875, 0xc6}, {0xf876, 0x02}, {0xf877, 0x04},
+	{0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff},
+	{0xf800, 0x03}
+};
+static const struct ucbus_write_cmd lz24bp_start_1_gen[] = {
+	{0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xb3},
+	{0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xb3},
+	{0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00},
+	{0xf5f9, 0x00}
+};
+
+static const struct ucbus_write_cmd lz24bp_start_1_clm[] = {
+	{0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88},
+	{0xf5f4, 0xc0},
+	{0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88},
+	{0xf5f4, 0xc0},
+	{0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00},
+	{0xf5f9, 0x00}
+};
+
+static const struct ucbus_write_cmd lz24bp_start_2[] = {
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x80}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x4e}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xc0}, {0xf806, 0x48},
+	{0xf807, 0x7f}, {0xf800, 0x03},
+	{0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00},
+	{0xf807, 0x7f}, {0xf800, 0x03}
+};
+
+static const struct ucbus_write_cmd mi0360_start_0[] = {
+	{0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0xcc}, {0xf333, 0xcc},
+	{0xf334, 0xcc}, {0xf335, 0xcc}, {0xf33f, 0x00}
+};
+static const struct i2c_write_cmd mi0360_init_23[] = {
+	{0x30, 0x0040},		/* reserved - def 0x0005 */
+	{0x31, 0x0000},		/* reserved - def 0x002a */
+	{0x34, 0x0100},		/* reserved - def 0x0100 */
+	{0x3d, 0x068f},		/* reserved - def 0x068f */
+};
+static const struct i2c_write_cmd mi0360_init_24[] = {
+	{0x03, 0x01e5},		/* window height */
+	{0x04, 0x0285},		/* window width */
+};
+static const struct i2c_write_cmd mi0360_init_25[] = {
+	{0x35, 0x0020},		/* global gain */
+	{0x2b, 0x0020},		/* green1 gain */
+	{0x2c, 0x002a},		/* blue gain */
+	{0x2d, 0x0028},		/* red gain */
+	{0x2e, 0x0020},		/* green2 gain */
+};
+static const struct ucbus_write_cmd mi0360_start_1[] = {
+	{0xf5f0, 0x11}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xa6},
+	{0xf5f0, 0x51}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xa6},
+	{0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00},
+	{0xf5f9, 0x00}
+};
+static const struct i2c_write_cmd mi0360_start_2[] = {
+	{0x62, 0x041d},		/* reserved - def 0x0418 */
+};
+static const struct i2c_write_cmd mi0360_start_3[] = {
+	{0x05, 0x007b},		/* horiz blanking */
+};
+static const struct i2c_write_cmd mi0360_start_4[] = {
+	{0x05, 0x03f5},		/* horiz blanking */
+};
+
+static const struct i2c_write_cmd mt9v111_init_0[] = {
+	{0x01, 0x0001},		/* select IFP/SOC registers */
+	{0x06, 0x300c},		/* operating mode control */
+	{0x08, 0xcc00},		/* output format control (RGB) */
+	{0x01, 0x0004},		/* select core registers */
+};
+static const struct i2c_write_cmd mt9v111_init_1[] = {
+	{0x03, 0x01e5},		/* window height */
+	{0x04, 0x0285},		/* window width */
+};
+static const struct i2c_write_cmd mt9v111_init_2[] = {
+	{0x30, 0x7800},
+	{0x31, 0x0000},
+	{0x07, 0x3002},		/* output control */
+	{0x35, 0x0020},		/* global gain */
+	{0x2b, 0x0020},		/* green1 gain */
+	{0x2c, 0x0020},		/* blue gain */
+	{0x2d, 0x0020},		/* red gain */
+	{0x2e, 0x0020},		/* green2 gain */
+};
+static const struct ucbus_write_cmd mt9v111_start_1[] = {
+	{0xf5f0, 0x11}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xaa},
+	{0xf5f0, 0x51}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80},
+	{0xf5f4, 0xaa},
+	{0xf5fa, 0x00}, {0xf5f6, 0x0a}, {0xf5f7, 0x0a}, {0xf5f8, 0x0a},
+	{0xf5f9, 0x0a}
+};
+static const struct i2c_write_cmd mt9v111_init_3[] = {
+	{0x62, 0x0405},
+};
+static const struct i2c_write_cmd mt9v111_init_4[] = {
+	{0x05, 0x00ce},		/* horizontal blanking */
+};
+
+static const struct ucbus_write_cmd ov7660_start_0[] = {
+	{0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0xc0},
+	{0xf334, 0x39}, {0xf335, 0xe7}, {0xf33f, 0x03}
+};
+
+static const struct ucbus_write_cmd ov9630_start_0[] = {
+	{0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0x00},
+	{0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03}
+};
+
+static const struct cap_s {
+	u8	cc_sizeid;
+	u8	cc_bytes[32];
+} capconfig[4][3] = {
+	[SENSOR_ICX098BQ] = {
+		{0,				/* JPEG, 160x120 */
+		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
+		   0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{2,				/* JPEG, 320x240 */
+		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
+		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{4,				/* JPEG, 640x480 */
+		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
+		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+	},
+	[SENSOR_LZ24BP] = {
+		{0,				/* JPEG, 160x120 */
+		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
+		   0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{2,				/* JPEG, 320x240 */
+		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
+		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{4,				/* JPEG, 640x480 */
+		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
+		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+	},
+	[SENSOR_MI0360] = {
+		{0,				/* JPEG, 160x120 */
+		  {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
+		   0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
+		   0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
+		{2,				/* JPEG, 320x240 */
+		  {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+/*fixme				       03		       e3 */
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
+		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{4,				/* JPEG, 640x480 */
+		  {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe3,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
+		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+	},
+	[SENSOR_MT9V111] = {
+		{0,				/* JPEG, 160x120 */
+		  {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
+		   0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
+		   0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
+		{2,				/* JPEG, 320x240 */
+		  {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
+		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
+		{4,				/* JPEG, 640x480 */
+		  {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
+		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
+		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+	},
+};
+
+struct sensor_s {
+	const char *name;
+	u8 i2c_addr;
+	u8 i2c_dum;
+	u8 gpio[5];
+	u8 cmd_len;
+	const struct ucbus_write_cmd *cmd;
+};
+
+static const struct sensor_s sensor_tb[] = {
+	[SENSOR_ICX098BQ] = {
+		"icx098bp",
+		0x00, 0x00,
+		{0,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 SQ930_GPIO_RSTBAR
+		},
+		8, icx098bq_start_0
+	    },
+	[SENSOR_LZ24BP] = {
+		"lz24bp",
+		0x00, 0x00,
+		{0,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 SQ930_GPIO_RSTBAR
+		},
+		8, lz24bp_start_0
+	    },
+	[SENSOR_MI0360] = {
+		"mi0360",
+		0x5d, 0x80,
+		{SQ930_GPIO_RSTBAR,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 0
+		},
+		7, mi0360_start_0
+	    },
+	[SENSOR_MT9V111] = {
+		"mt9v111",
+		0x5c, 0x7f,
+		{SQ930_GPIO_RSTBAR,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 0
+		},
+		7, mi0360_start_0
+	    },
+	[SENSOR_OV7660] = {
+		"ov7660",
+		0x21, 0x00,
+		{0,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 SQ930_GPIO_RSTBAR
+		},
+		7, ov7660_start_0
+	    },
+	[SENSOR_OV9630] = {
+		"ov9630",
+		0x30, 0x00,
+		{0,
+		 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL,
+		 SQ930_GPIO_DFL_I2C_SDA,
+		 0,
+		 SQ930_GPIO_RSTBAR
+		},
+		7, ov9630_start_0
+	    },
+};
+
+static void reg_r(struct gspca_dev *gspca_dev,
+		u16 value, int len)
+{
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_rcvctrlpipe(gspca_dev->dev, 0),
+			0x0c,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, 0, gspca_dev->usb_buf, len,
+			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_r %04x failed %d", value, ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index)
+{
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	PDEBUG(D_USBO, "reg_w v: %04x i: %04x", value, index);
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x0c,			/* request */
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index, NULL, 0,
+			500);
+	msleep(30);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w %04x %04x failed %d", value, index, ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void reg_wb(struct gspca_dev *gspca_dev, u16 value, u16 index,
+		const u8 *data, int len)
+{
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	PDEBUG(D_USBO, "reg_wb v: %04x i: %04x %02x...%02x",
+			value, index, *data, data[len - 1]);
+	memcpy(gspca_dev->usb_buf, data, len);
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x0c,			/* request */
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index, gspca_dev->usb_buf, len,
+			1000);
+	msleep(30);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_wb %04x %04x failed %d", value, index, ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void i2c_write(struct sd *sd,
+			const struct i2c_write_cmd *cmd,
+			int ncmds)
+{
+	struct gspca_dev *gspca_dev = &sd->gspca_dev;
+	const struct sensor_s *sensor;
+	u16 val, idx;
+	u8 *buf;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	sensor = &sensor_tb[sd->sensor];
+
+	val = (sensor->i2c_addr << 8) | SQ930_CTRL_I2C_IO;
+	idx = (cmd->val & 0xff00) | cmd->reg;
+
+	buf = gspca_dev->usb_buf;
+	*buf++ = sensor->i2c_dum;
+	*buf++ = cmd->val;
+
+	while (--ncmds > 0) {
+		cmd++;
+		*buf++ = cmd->reg;
+		*buf++ = cmd->val >> 8;
+		*buf++ = sensor->i2c_dum;
+		*buf++ = cmd->val;
+	}
+
+	PDEBUG(D_USBO, "i2c_w v: %04x i: %04x %02x...%02x",
+			val, idx, gspca_dev->usb_buf[0], buf[-1]);
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x0c,			/* request */
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			val, idx,
+			gspca_dev->usb_buf, buf - gspca_dev->usb_buf,
+			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "i2c_write failed %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+static void ucbus_write(struct gspca_dev *gspca_dev,
+			const struct ucbus_write_cmd *cmd,
+			int ncmds,
+			int batchsize)
+{
+	u8 *buf;
+	u16 val, idx;
+	int len, ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+#ifdef GSPCA_DEBUG
+	if ((batchsize - 1) * 3 > USB_BUF_SZ) {
+		err("Bug: usb_buf overflow");
+		gspca_dev->usb_err = -ENOMEM;
+		return;
+	}
+#endif
+
+	for (;;) {
+		len = ncmds;
+		if (len > batchsize)
+			len = batchsize;
+		ncmds -= len;
+
+		val = (cmd->bw_addr << 8) | SQ930_CTRL_UCBUS_IO;
+		idx = (cmd->bw_data << 8) | (cmd->bw_addr >> 8);
+
+		buf = gspca_dev->usb_buf;
+		while (--len > 0) {
+			cmd++;
+			*buf++ = cmd->bw_addr;
+			*buf++ = cmd->bw_addr >> 8;
+			*buf++ = cmd->bw_data;
+		}
+		if (buf != gspca_dev->usb_buf)
+			PDEBUG(D_USBO, "ucbus v: %04x i: %04x %02x...%02x",
+					val, idx,
+					gspca_dev->usb_buf[0], buf[-1]);
+		else
+			PDEBUG(D_USBO, "ucbus v: %04x i: %04x",
+					val, idx);
+		ret = usb_control_msg(gspca_dev->dev,
+				usb_sndctrlpipe(gspca_dev->dev, 0),
+				0x0c,			/* request */
+			   USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				val, idx,
+				gspca_dev->usb_buf, buf - gspca_dev->usb_buf,
+				500);
+		if (ret < 0) {
+			PDEBUG(D_ERR, "ucbus_write failed %d", ret);
+			gspca_dev->usb_err = ret;
+			return;
+		}
+		msleep(30);
+		if (ncmds <= 0)
+			break;
+		cmd++;
+	}
+}
+
+static void gpio_set(struct sd *sd, u16 val, u16 mask)
+{
+	struct gspca_dev *gspca_dev = &sd->gspca_dev;
+
+	if (mask & 0x00ff) {
+		sd->gpio[0] &= ~mask;
+		sd->gpio[0] |= val;
+		reg_w(gspca_dev, 0x0100 | SQ930_CTRL_GPIO,
+			~sd->gpio[0] << 8);
+	}
+	mask >>= 8;
+	val >>= 8;
+	if (mask) {
+		sd->gpio[1] &= ~mask;
+		sd->gpio[1] |= val;
+		reg_w(gspca_dev, 0x0300 | SQ930_CTRL_GPIO,
+			~sd->gpio[1] << 8);
+	}
+}
+
+static void gpio_init(struct sd *sd,
+			const u8 *gpio)
+{
+	gpio_set(sd, *gpio++, 0x000f);
+	gpio_set(sd, *gpio++, 0x000f);
+	gpio_set(sd, *gpio++, 0x000f);
+	gpio_set(sd, *gpio++, 0x000f);
+	gpio_set(sd, *gpio, 0x000f);
+}
+
+static void bridge_init(struct sd *sd)
+{
+	static const struct ucbus_write_cmd clkfreq_cmd = {
+				0xf031, 0	/* SQ930_CLKFREQ_60MHZ */
+	};
+
+	ucbus_write(&sd->gspca_dev, &clkfreq_cmd, 1, 1);
+
+	gpio_set(sd, SQ930_GPIO_POWER, 0xff00);
+}
+
+static void cmos_probe(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	const struct sensor_s *sensor;
+	static const u8 probe_order[] = {
+/*		SENSOR_LZ24BP,		(tested as ccd) */
+		SENSOR_OV9630,
+		SENSOR_MI0360,
+		SENSOR_OV7660,
+		SENSOR_MT9V111,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(probe_order); i++) {
+		sensor = &sensor_tb[probe_order[i]];
+		ucbus_write(&sd->gspca_dev, sensor->cmd, sensor->cmd_len, 8);
+		gpio_init(sd, sensor->gpio);
+		msleep(100);
+		reg_r(gspca_dev, (sensor->i2c_addr << 8) | 0x001c, 1);
+		msleep(100);
+		if (gspca_dev->usb_buf[0] != 0)
+			break;
+	}
+	if (i >= ARRAY_SIZE(probe_order))
+		PDEBUG(D_PROBE, "Unknown sensor");
+	else
+		sd->sensor = probe_order[i];
+}
+
+static void mt9v111_init(struct gspca_dev *gspca_dev)
+{
+	int i, nwait;
+	static const u8 cmd_001b[] = {
+		0x00, 0x3b, 0xf6, 0x01, 0x03, 0x02, 0x00, 0x00,
+		0x00, 0x00, 0x00
+	};
+	static const u8 cmd_011b[][7] = {
+		{0x10, 0x01, 0x66, 0x08, 0x00, 0x00, 0x00},
+		{0x01, 0x00, 0x1a, 0x04, 0x00, 0x00, 0x00},
+		{0x20, 0x00, 0x10, 0x04, 0x00, 0x00, 0x00},
+		{0x02, 0x01, 0xae, 0x01, 0x00, 0x00, 0x00},
+	};
+
+	reg_wb(gspca_dev, 0x001b, 0x0000, cmd_001b, sizeof cmd_001b);
+	for (i = 0; i < ARRAY_SIZE(cmd_011b); i++) {
+		reg_wb(gspca_dev, 0x001b, 0x0000, cmd_011b[i],
+				ARRAY_SIZE(cmd_011b[0]));
+		msleep(400);
+		nwait = 20;
+		for (;;) {
+			reg_r(gspca_dev, 0x031b, 1);
+			if (gspca_dev->usb_buf[0] == 0
+			 || gspca_dev->usb_err != 0)
+				break;
+			if (--nwait < 0) {
+				PDEBUG(D_PROBE, "mt9v111_init timeout");
+				gspca_dev->usb_err = -ETIME;
+				return;
+			}
+			msleep(50);
+		}
+	}
+}
+
+static void global_init(struct sd *sd, int first_time)
+{
+	switch (sd->sensor) {
+	case SENSOR_ICX098BQ:
+		if (first_time)
+			ucbus_write(&sd->gspca_dev,
+					icx098bq_start_0,
+					8, 8);
+		gpio_init(sd, sensor_tb[sd->sensor].gpio);
+		break;
+	case SENSOR_LZ24BP:
+		if (sd->type != Creative_live_motion)
+			gpio_set(sd, SQ930_GPIO_EXTRA1, 0x00ff);
+		else
+			gpio_set(sd, 0, 0x00ff);
+		msleep(50);
+		if (first_time)
+			ucbus_write(&sd->gspca_dev,
+					lz24bp_start_0,
+					8, 8);
+		gpio_init(sd, sensor_tb[sd->sensor].gpio);
+		break;
+	case SENSOR_MI0360:
+		if (first_time)
+			ucbus_write(&sd->gspca_dev,
+					mi0360_start_0,
+					ARRAY_SIZE(mi0360_start_0),
+					8);
+		gpio_init(sd, sensor_tb[sd->sensor].gpio);
+		gpio_set(sd, SQ930_GPIO_EXTRA2, SQ930_GPIO_EXTRA2);
+		break;
+	default:
+/*	case SENSOR_MT9V111: */
+		if (first_time)
+			mt9v111_init(&sd->gspca_dev);
+		else
+			gpio_init(sd, sensor_tb[sd->sensor].gpio);
+		break;
+	}
+}
+
+static void lz24bp_ppl(struct sd *sd, u16 ppl)
+{
+	struct ucbus_write_cmd cmds[2] = {
+		{0xf810, ppl >> 8},
+		{0xf811, ppl}
+	};
+
+	ucbus_write(&sd->gspca_dev, cmds, ARRAY_SIZE(cmds), 2);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i, integclks, intstartclk, frameclks, min_frclk;
+	const struct sensor_s *sensor;
+	u16 cmd;
+	u8 buf[15];
+
+	integclks = sd->expo;
+	i = 0;
+	cmd = SQ930_CTRL_SET_EXPOSURE;
+
+	switch (sd->sensor) {
+	case SENSOR_ICX098BQ:			/* ccd */
+	case SENSOR_LZ24BP:
+		min_frclk = sd->sensor == SENSOR_ICX098BQ ? 0x210 : 0x26f;
+		if (integclks >= min_frclk) {
+			intstartclk = 0;
+			frameclks = integclks;
+		} else {
+			intstartclk = min_frclk - integclks;
+			frameclks = min_frclk;
+		}
+		buf[i++] = intstartclk >> 8;
+		buf[i++] = intstartclk;
+		buf[i++] = frameclks >> 8;
+		buf[i++] = frameclks;
+		buf[i++] = sd->gain;
+		break;
+	default:				/* cmos */
+/*	case SENSOR_MI0360: */
+/*	case SENSOR_MT9V111: */
+		cmd |= 0x0100;
+		sensor = &sensor_tb[sd->sensor];
+		buf[i++] = sensor->i2c_addr;	/* i2c_slave_addr */
+		buf[i++] = 0x08;	/* 2 * ni2c */
+		buf[i++] = 0x09;	/* reg = shutter width */
+		buf[i++] = integclks >> 8; /* val H */
+		buf[i++] = sensor->i2c_dum;
+		buf[i++] = integclks;	/* val L */
+		buf[i++] = 0x35;	/* reg = global gain */
+		buf[i++] = 0x00;	/* val H */
+		buf[i++] = sensor->i2c_dum;
+		buf[i++] = sd->gain;	/* val L */
+		buf[i++] = 0x00;
+		buf[i++] = 0x00;
+		buf[i++] = 0x00;
+		buf[i++] = 0x00;
+		buf[i++] = 0x83;
+		break;
+	}
+	reg_wb(gspca_dev, cmd, 0, buf, i);
+}
+
+/* This function is called at probe time just before sd_init */
+static int sd_config(struct gspca_dev *gspca_dev,
+		const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+
+	sd->sensor = id->driver_info >> 8;
+	sd->type = id->driver_info;
+
+	cam->cam_mode = vga_mode;
+	cam->nmodes = ARRAY_SIZE(vga_mode);
+
+	cam->bulk = 1;
+	cam->bulk_size = BULK_TRANSFER_LEN;
+/*	cam->bulk_nurbs = 2;	fixme: if no setexpo sync */
+
+	sd->quality = QUALITY_DEF;
+	sd->gain = GAIN_DEF;
+	sd->expo = EXPO_DEF;
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gpio[0] = sd->gpio[1] = 0xff;	/* force gpio rewrite */
+
+/*fixme: is this needed for icx098bp and mi0360?
+	if (sd->sensor != SENSOR_LZ24BP)
+		reg_w(gspca_dev, SQ930_CTRL_RESET, 0x0000);
+ */
+
+	reg_r(gspca_dev, SQ930_CTRL_GET_DEV_INFO, 8);
+/* it returns:
+ * 03 00 12 93 0b f6 c9 00	live! ultra
+ * 03 00 07 93 0b f6 ca 00	live! ultra for notebook
+ * 03 00 12 93 0b fe c8 00	Trust WB-3500T
+ * 02 00 06 93 0b fe c8 00	Joy-IT 318S
+ * 03 00 12 93 0b f6 cf 00	icam tracer - sensor icx098bq
+ * 02 00 12 93 0b fe cf 00	ProQ Motion Webcam
+ *
+ * byte
+ * 0: 02 = usb 1.0 (12Mbit) / 03 = usb2.0 (480Mbit)
+ * 1: 00
+ * 2: 06 / 07 / 12 = mode webcam? firmware??
+ * 3: 93 chip = 930b (930b or 930c)
+ * 4: 0b
+ * 5: f6 = cdd (icx098bq, lz24bp) / fe or de = cmos (i2c) (other sensors)
+ * 6: c8 / c9 / ca / cf = mode webcam?, sensor? webcam?
+ * 7: 00
+ */
+	PDEBUG(D_PROBE, "info: %02x %02x %02x %02x %02x %02x %02x %02x",
+			gspca_dev->usb_buf[0],
+			gspca_dev->usb_buf[1],
+			gspca_dev->usb_buf[2],
+			gspca_dev->usb_buf[3],
+			gspca_dev->usb_buf[4],
+			gspca_dev->usb_buf[5],
+			gspca_dev->usb_buf[6],
+			gspca_dev->usb_buf[7]);
+
+	bridge_init(sd);
+
+	if (sd->sensor == SENSOR_MI0360) {
+
+		/* no sensor probe for icam tracer */
+		if (gspca_dev->usb_buf[5] == 0xf6) {	/* if CMOS */
+			sd->sensor = SENSOR_ICX098BQ;
+			gspca_dev->cam.cam_mode = &vga_mode[1];
+			gspca_dev->cam.nmodes = 1;	/* only 320x240 */
+		} else {
+			cmos_probe(gspca_dev);
+		}
+	}
+
+	PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
+
+	global_init(sd, 1);
+	return gspca_dev->usb_err;
+}
+
+/* special function to create the quantization tables of the JPEG header */
+static void sd_jpeg_set_qual(u8 *jpeg_hdr,
+				int quality)
+{
+	int i, sc1, sc2;
+
+	quality = quality_tb[quality];	/* convert to JPEG quality */
+/*
+ * approximative qualities for Y and U/V:
+ *	quant = 0:94%/91% 1:91%/87% 2:82%/73% 3:69%/56%
+ * should have:
+ *	quant = 0:94%/91% 1:91%/87.5% 2:81.5%/72% 3:69%/54.5%
+ */
+	sc1 = 200 - quality * 2;
+	quality = quality * 7 / 5 - 40;		/* UV quality */
+	sc2 = 200 - quality * 2;
+	for (i = 0; i < 64; i++) {
+		jpeg_hdr[JPEG_QT0_OFFSET + i] =
+			(jpeg_head[JPEG_QT0_OFFSET + i] * sc1 + 50) / 100;
+		jpeg_hdr[JPEG_QT1_OFFSET + i] =
+			(jpeg_head[JPEG_QT1_OFFSET + i] * sc2 + 50) / 100;
+	}
+}
+
+/* send the start/stop commands to the webcam */
+static void send_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	const struct cap_s *cap;
+	int mode, quality;
+
+	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+	cap = &capconfig[sd->sensor][mode];
+	quality = sd->quality;
+	reg_wb(gspca_dev, (quality << 12)
+				 | 0x0a00	/* 900 for Bayer */
+				 | SQ930_CTRL_CAP_START,
+			0x0500			/* a00 for Bayer */
+				 | cap->cc_sizeid,
+			cap->cc_bytes, 32);
+};
+static void send_stop(struct gspca_dev *gspca_dev)
+{
+	reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0);
+};
+
+/* function called at start time before URB creation */
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dev->cam.bulk_nurbs = 1;	/* there must be one URB only */
+	sd->do_ctrl = 0;
+	return 0;
+}
+
+/* start the capture */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int mode;
+
+	/* initialize the JPEG header */
+	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
+			0x21);		/* JPEG 422 */
+	sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+	bridge_init(sd);
+	global_init(sd, 0);
+	msleep(100);
+
+	switch (sd->sensor) {
+	case SENSOR_ICX098BQ:
+		ucbus_write(gspca_dev, icx098bq_start_0,
+				ARRAY_SIZE(icx098bq_start_0),
+				8);
+		ucbus_write(gspca_dev, icx098bq_start_1,
+				ARRAY_SIZE(icx098bq_start_1),
+				5);
+		ucbus_write(gspca_dev, icx098bq_start_2,
+				ARRAY_SIZE(icx098bq_start_2),
+				6);
+		msleep(50);
+
+		/* 1st start */
+		send_start(gspca_dev);
+		gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff);
+		msleep(70);
+		reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000);
+		gpio_set(sd, 0x7f, 0x00ff);
+
+		/* 2nd start */
+		send_start(gspca_dev);
+		gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff);
+		goto out;
+	case SENSOR_LZ24BP:
+		ucbus_write(gspca_dev, lz24bp_start_0,
+				ARRAY_SIZE(lz24bp_start_0),
+				8);
+		if (sd->type != Creative_live_motion)
+			ucbus_write(gspca_dev, lz24bp_start_1_gen,
+					ARRAY_SIZE(lz24bp_start_1_gen),
+					5);
+		else
+			ucbus_write(gspca_dev, lz24bp_start_1_clm,
+					ARRAY_SIZE(lz24bp_start_1_clm),
+					5);
+		ucbus_write(gspca_dev, lz24bp_start_2,
+				ARRAY_SIZE(lz24bp_start_2),
+				6);
+		mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+		lz24bp_ppl(sd, mode == 2 ? 0x0564 : 0x0310);
+		msleep(10);
+		break;
+	case SENSOR_MI0360:
+		ucbus_write(gspca_dev, mi0360_start_0,
+				ARRAY_SIZE(mi0360_start_0),
+				8);
+		i2c_write(sd, mi0360_init_23,
+				ARRAY_SIZE(mi0360_init_23));
+		i2c_write(sd, mi0360_init_24,
+				ARRAY_SIZE(mi0360_init_24));
+		i2c_write(sd, mi0360_init_25,
+				ARRAY_SIZE(mi0360_init_25));
+		ucbus_write(gspca_dev, mi0360_start_1,
+				ARRAY_SIZE(mi0360_start_1),
+				5);
+		i2c_write(sd, mi0360_start_2,
+				ARRAY_SIZE(mi0360_start_2));
+		i2c_write(sd, mi0360_start_3,
+				ARRAY_SIZE(mi0360_start_3));
+
+		/* 1st start */
+		send_start(gspca_dev);
+		msleep(60);
+		reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000);
+
+		i2c_write(sd,
+			mi0360_start_4, ARRAY_SIZE(mi0360_start_4));
+		break;
+	default:
+/*	case SENSOR_MT9V111: */
+		ucbus_write(gspca_dev, mi0360_start_0,
+				ARRAY_SIZE(mi0360_start_0),
+				8);
+		i2c_write(sd, mt9v111_init_0,
+				ARRAY_SIZE(mt9v111_init_0));
+		i2c_write(sd, mt9v111_init_1,
+				ARRAY_SIZE(mt9v111_init_1));
+		i2c_write(sd, mt9v111_init_2,
+				ARRAY_SIZE(mt9v111_init_2));
+		ucbus_write(gspca_dev, mt9v111_start_1,
+				ARRAY_SIZE(mt9v111_start_1),
+				8);
+		i2c_write(sd, mt9v111_init_3,
+				ARRAY_SIZE(mt9v111_init_3));
+		i2c_write(sd, mt9v111_init_4,
+				ARRAY_SIZE(mt9v111_init_4));
+		break;
+	}
+
+	send_start(gspca_dev);
+out:
+	msleep(1000);
+
+	sd->eof_len = 0;	/* init packet scan */
+
+	if (sd->sensor == SENSOR_MT9V111)
+		gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED);
+
+	sd->do_ctrl = 1;	/* set the exposure */
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_MT9V111)
+		gpio_set(sd, 0, SQ930_GPIO_DFL_LED);
+	send_stop(gspca_dev);
+}
+
+/* function called when the application gets a new frame */
+/* It sets the exposure if required and restart the bulk transfer. */
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int ret;
+
+	if (!sd->do_ctrl || gspca_dev->cam.bulk_nurbs != 0)
+		return;
+	sd->do_ctrl = 0;
+
+	setexposure(gspca_dev);
+
+	gspca_dev->cam.bulk_nurbs = 1;
+	ret = usb_submit_urb(gspca_dev->urb[0], GFP_ATOMIC);
+	if (ret < 0)
+		PDEBUG(D_ERR|D_PACK, "sd_dq_callback() err %d", ret);
+
+	/* wait a little time, otherwise the webcam crashes */
+	msleep(100);
+}
+
+/* move a packet adding 0x00 after 0xff */
+static void add_packet(struct gspca_dev *gspca_dev,
+			u8 *data,
+			int len)
+{
+	int i;
+
+	i = 0;
+	do {
+		if (data[i] == 0xff) {
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data, i + 1);
+			len -= i;
+			data += i;
+			*data = 0x00;
+			i = 0;
+		}
+	} while (++i < len);
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+/* end a frame and start a new one */
+static void eof_sof(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	static const u8 ffd9[] = {0xff, 0xd9};
+
+	/* if control set, stop bulk transfer */
+	if (sd->do_ctrl
+	 && gspca_dev->last_packet_type == INTER_PACKET)
+		gspca_dev->cam.bulk_nurbs = 0;
+	gspca_frame_add(gspca_dev, LAST_PACKET,
+			ffd9, 2);
+	gspca_frame_add(gspca_dev, FIRST_PACKET,
+			sd->jpeg_hdr, JPEG_HDR_SZ);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,		/* isoc packet */
+			int len)		/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 *p;
+	int l;
+
+	len -= 8;	/* ignore last 8 bytes (00 00 55 aa 55 aa 00 00) */
+
+	/*
+	 * the end/start of frame is indicated by
+	 *	0x00 * 16 -  0xab * 8
+	 * aligned on 8 bytes boundary
+	 */
+	if (sd->eof_len != 0) {		/* if 'abababab' in previous pkt */
+		if (*((u32 *) data) == 0xabababab) {
+				/*fixme: should remove previous 0000ababab*/
+			eof_sof(gspca_dev);
+			data += 4;
+			len -= 4;
+		}
+		sd->eof_len = 0;
+	}
+	p = data;
+	l = len;
+	for (;;) {
+		if (*((u32 *) p) == 0xabababab) {
+			if (l < 8) {		/* (may be 4 only) */
+				sd->eof_len = 1;
+				break;
+			}
+			if (*((u32 *) p + 1) == 0xabababab) {
+				add_packet(gspca_dev, data, p - data - 16);
+						/* remove previous zeros */
+				eof_sof(gspca_dev);
+				p += 8;
+				l -= 8;
+				if (l <= 0)
+					return;
+				len = l;
+				data = p;
+				continue;
+			}
+		}
+		p += 4;
+		l -= 4;
+		if (l <= 0)
+			break;
+	}
+	add_packet(gspca_dev, data, len);
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		sd->do_ctrl = 1;
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->expo = val;
+	if (gspca_dev->streaming)
+		sd->do_ctrl = 1;
+	return 0;
+}
+
+static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->expo;
+	return 0;
+}
+
+static int sd_set_jcomp(struct gspca_dev *gspca_dev,
+			struct v4l2_jpegcompression *jcomp)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int quality;
+
+	if (jcomp->quality >= (QUAL_0 + QUAL_1) / 2)
+		quality = 0;
+	else if (jcomp->quality >= (QUAL_1 + QUAL_2) / 2)
+		quality = 1;
+	else if (jcomp->quality >= (QUAL_2 + QUAL_3) / 2)
+		quality = 2;
+	else
+		quality = 3;
+
+	if (quality != sd->quality) {
+		sd->quality = quality;
+		if (gspca_dev->streaming) {
+			send_stop(gspca_dev);
+			sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+			msleep(70);
+			send_start(gspca_dev);
+		}
+	}
+	return gspca_dev->usb_err;
+}
+
+static int sd_get_jcomp(struct gspca_dev *gspca_dev,
+			struct v4l2_jpegcompression *jcomp)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	memset(jcomp, 0, sizeof *jcomp);
+	jcomp->quality = quality_tb[sd->quality];
+	jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT
+			| V4L2_JPEG_MARKER_DQT;
+	return 0;
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name   = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init   = sd_init,
+	.isoc_init = sd_isoc_init,
+	.start  = sd_start,
+	.stopN  = sd_stopN,
+	.pkt_scan = sd_pkt_scan,
+	.dq_callback = sd_dq_callback,
+	.get_jcomp = sd_get_jcomp,
+	.set_jcomp = sd_set_jcomp,
+};
+
+/* Table of supported USB devices */
+#define ST(sensor, type) \
+	.driver_info = (SENSOR_ ## sensor << 8) \
+			| (type)
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x041e, 0x4038), ST(MI0360, 0)},
+	{USB_DEVICE(0x041e, 0x403c), ST(LZ24BP, 0)},
+	{USB_DEVICE(0x041e, 0x403d), ST(LZ24BP, 0)},
+	{USB_DEVICE(0x041e, 0x4041), ST(LZ24BP, Creative_live_motion)},
+	{USB_DEVICE(0x2770, 0x930b), ST(MI0360, 0)},
+	{USB_DEVICE(0x2770, 0x930c), ST(MI0360, 0)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+			THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name	    = MODULE_NAME,
+	.id_table   = device_table,
+	.probe	    = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend    = gspca_suspend,
+	.resume     = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 0fb534210a2..2aedf4b1bfa 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -36,11 +36,11 @@ struct sd {
 	unsigned char colors;
 	unsigned char lightfreq;
 	u8 quality;
-#define QUALITY_MIN 60
+#define QUALITY_MIN 70
 #define QUALITY_MAX 95
-#define QUALITY_DEF 80
+#define QUALITY_DEF 88
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
@@ -337,9 +337,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int ret, value;
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -412,13 +409,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	PDEBUG(D_STREAM, "camera stopped");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	kfree(sd->jpeg_hdr);
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -578,7 +568,6 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 	.get_jcomp = sd_get_jcomp,
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 992ce530f13..053a27e3a40 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -30,6 +30,7 @@
 #ifndef STV06XX_H_
 #define STV06XX_H_
 
+#include <linux/slab.h>
 #include "gspca.h"
 
 #define MODULE_NAME "STV06xx"
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 0c786e00ebc..21d82bab0c2 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -54,7 +54,7 @@ struct sd {
 #define MegapixV4 4
 #define MegaImageVI 5
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
@@ -842,9 +842,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int enable;
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -954,13 +951,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	kfree(sd->jpeg_hdr);
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -1162,7 +1152,6 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
 	.get_jcomp = sd_get_jcomp,
 	.set_jcomp = sd_set_jcomp,
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 63014372adb..2a0f12d55e4 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1,5 +1,7 @@
 /*
- * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ * T613 subdriver
+ *
+ * Copyright (C) 2010 Jean-Francois Moine (http://moinejf.free.fr)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,6 +28,7 @@
 
 #define MODULE_NAME "t613"
 
+#include <linux/slab.h>
 #include "gspca.h"
 
 #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0)
@@ -44,18 +47,20 @@ struct sd {
 	u8 gamma;
 	u8 sharpness;
 	u8 freq;
-	u8 red_balance; /* split balance */
-	u8 blue_balance;
-	u8 global_gain; /* aka gain */
-	u8 whitebalance; /* set default r/g/b and activate */
+	u8 red_gain;
+	u8 blue_gain;
+	u8 green_gain;
+	u8 awb; /* set default r/g/b and activate */
 	u8 mirror;
 	u8 effect;
 
 	u8 sensor;
-#define SENSOR_OM6802 0
-#define SENSOR_OTHER 1
-#define SENSOR_TAS5130A 2
-#define SENSOR_LT168G 3     /* must verify if this is the actual model */
+enum {
+	SENSOR_OM6802,
+	SENSOR_OTHER,
+	SENSOR_TAS5130A,
+	SENSOR_LT168G,		/* must verify if this is the actual model */
+} sensors;
 };
 
 /* V4L2 controls supported by the driver */
@@ -74,24 +79,22 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 
-
-static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setblue_balance(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getblue_balance(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setred_balance(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getred_balance(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setglobal_gain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getglobal_gain(struct gspca_dev *gspca_dev, __s32 *val);
-
-static int sd_setflip(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setblue_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getblue_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setred_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getred_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+
+static int sd_setmirror(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getmirror(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_seteffect(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_geteffect(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 			struct v4l2_querymenu *menu);
 
-
 static const struct ctrl sd_ctrls[] = {
 	{
 	 {
@@ -177,8 +180,8 @@ static const struct ctrl sd_ctrls[] = {
 #define MIRROR_DEF 0
 	  .default_value = MIRROR_DEF,
 	  },
-	 .set = sd_setflip,
-	 .get = sd_getflip
+	 .set = sd_setmirror,
+	 .get = sd_getmirror
 	},
 	{
 	 {
@@ -198,15 +201,15 @@ static const struct ctrl sd_ctrls[] = {
 	 {
 	  .id =  V4L2_CID_AUTO_WHITE_BALANCE,
 	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "White Balance",
+	  .name = "Auto White Balance",
 	  .minimum = 0,
 	  .maximum = 1,
 	  .step = 1,
-#define WHITE_BALANCE_DEF 0
-	  .default_value = WHITE_BALANCE_DEF,
+#define AWB_DEF 0
+	  .default_value = AWB_DEF,
 	  },
-	 .set = sd_setwhitebalance,
-	 .get = sd_getwhitebalance
+	 .set = sd_setawb,
+	 .get = sd_getawb
 	},
 	{
 	 {
@@ -244,11 +247,11 @@ static const struct ctrl sd_ctrls[] = {
 	    .minimum = 0x10,
 	    .maximum = 0x40,
 	    .step    = 1,
-#define BLUE_BALANCE_DEF 0x20
-	    .default_value = BLUE_BALANCE_DEF,
+#define BLUE_GAIN_DEF 0x20
+	    .default_value = BLUE_GAIN_DEF,
 	 },
-	.set = sd_setblue_balance,
-	.get = sd_getblue_balance,
+	.set = sd_setblue_gain,
+	.get = sd_getblue_gain,
 	},
 	{
 	 {
@@ -258,11 +261,11 @@ static const struct ctrl sd_ctrls[] = {
 	    .minimum = 0x10,
 	    .maximum = 0x40,
 	    .step    = 1,
-#define RED_BALANCE_DEF 0x20
-	    .default_value = RED_BALANCE_DEF,
+#define RED_GAIN_DEF 0x20
+	    .default_value = RED_GAIN_DEF,
 	 },
-	.set = sd_setred_balance,
-	.get = sd_getred_balance,
+	.set = sd_setred_gain,
+	.get = sd_getred_gain,
 	},
 	{
 	 {
@@ -272,24 +275,14 @@ static const struct ctrl sd_ctrls[] = {
 	    .minimum = 0x10,
 	    .maximum = 0x40,
 	    .step    = 1,
-#define global_gain_DEF  0x20
-	    .default_value = global_gain_DEF,
+#define GAIN_DEF  0x20
+	    .default_value = GAIN_DEF,
 	 },
-	.set = sd_setglobal_gain,
-	.get = sd_getglobal_gain,
+	.set = sd_setgain,
+	.get = sd_getgain,
 	},
 };
 
-static char *effects_control[] = {
-	"Normal",
-	"Emboss",		/* disabled */
-	"Monochrome",
-	"Sepia",
-	"Sketch",
-	"Sun Effect",		/* disabled */
-	"Negative",
-};
-
 static const struct v4l2_pix_format vga_mode_t16[] = {
 	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
@@ -327,7 +320,6 @@ struct additional_sensor_data {
 	const u8 data1[10];
 	const u8 data2[9];
 	const u8 data3[9];
-	const u8 data4[4];
 	const u8 data5[6];
 	const u8 stream[4];
 };
@@ -375,7 +367,7 @@ static const u8 n4_lt168g[] = {
 };
 
 static const struct additional_sensor_data sensor_data[] = {
-    {				/* 0: OM6802 */
+[SENSOR_OM6802] = {
 	.n3 =
 		{0x61, 0x68, 0x65, 0x0a, 0x60, 0x04},
 	.n4 = n4_om6802,
@@ -392,14 +384,12 @@ static const struct additional_sensor_data sensor_data[] = {
 	.data3 =
 		{0x80, 0xff, 0xff, 0x80, 0xff, 0xff, 0x80, 0xff,
 		 0xff},
-	.data4 =	/*Freq (50/60Hz). Splitted for test purpose */
-		{0x66, 0xca, 0xa8, 0xf0},
 	.data5 =	/* this could be removed later */
 		{0x0c, 0x03, 0xab, 0x13, 0x81, 0x23},
 	.stream =
 		{0x0b, 0x04, 0x0a, 0x78},
     },
-    {				/* 1: OTHER */
+[SENSOR_OTHER] = {
 	.n3 =
 		{0x61, 0xc2, 0x65, 0x88, 0x60, 0x00},
 	.n4 = n4_other,
@@ -416,14 +406,12 @@ static const struct additional_sensor_data sensor_data[] = {
 	.data3 =
 		{0x4e, 0x9c, 0xec, 0x40, 0x80, 0xc0, 0x48, 0x96,
 		 0xd9},
-	.data4 =
-		{0x66, 0x00, 0xa8, 0xa8},
 	.data5 =
 		{0x0c, 0x03, 0xab, 0x29, 0x81, 0x69},
 	.stream =
 		{0x0b, 0x04, 0x0a, 0x00},
     },
-    {				/* 2: TAS5130A */
+[SENSOR_TAS5130A] = {
 	.n3 =
 		{0x61, 0xc2, 0x65, 0x0d, 0x60, 0x08},
 	.n4 = n4_tas5130a,
@@ -440,14 +428,12 @@ static const struct additional_sensor_data sensor_data[] = {
 	.data3 =
 		{0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8,
 		 0xe0},
-	.data4 =	/* Freq (50/60Hz). Splitted for test purpose */
-		{0x66, 0x00, 0xa8, 0xe8},
 	.data5 =
 		{0x0c, 0x03, 0xab, 0x10, 0x81, 0x20},
 	.stream =
 		{0x0b, 0x04, 0x0a, 0x40},
     },
-    {				/* 3: LT168G */
+[SENSOR_LT168G] = {
 	.n3 = {0x61, 0xc2, 0x65, 0x68, 0x60, 0x00},
 	.n4 = n4_lt168g,
 	.n4sz = sizeof n4_lt168g,
@@ -460,7 +446,6 @@ static const struct additional_sensor_data sensor_data[] = {
 		 0xff},
 	.data3 = {0x40, 0x80, 0xc0, 0x50, 0xa0, 0xf0, 0x53, 0xa6,
 		 0xff},
-	.data4 = {0x66, 0x41, 0xa8, 0xf0},
 	.data5 = {0x0c, 0x03, 0xab, 0x4b, 0x81, 0x2b},
 	.stream = {0x0b, 0x04, 0x0a, 0x28},
     },
@@ -469,6 +454,15 @@ static const struct additional_sensor_data sensor_data[] = {
 #define MAX_EFFECTS 7
 /* easily done by soft, this table could be removed,
  * i keep it here just in case */
+static char *effects_control[MAX_EFFECTS] = {
+	"Normal",
+	"Emboss",		/* disabled */
+	"Monochrome",
+	"Sepia",
+	"Sketch",
+	"Sun Effect",		/* disabled */
+	"Negative",
+};
 static const u8 effects_table[MAX_EFFECTS][6] = {
 	{0xa8, 0xe8, 0xc6, 0xd2, 0xc0, 0x00},	/* Normal */
 	{0xa8, 0xc8, 0xc6, 0x52, 0xc0, 0x04},	/* Repujar */
@@ -480,40 +474,41 @@ static const u8 effects_table[MAX_EFFECTS][6] = {
 };
 
 static const u8 gamma_table[GAMMA_MAX][17] = {
-	{0x00, 0x3e, 0x69, 0x85, 0x95, 0xa1, 0xae, 0xb9,	/* 0 */
-	 0xc2, 0xcb, 0xd4, 0xdb, 0xe3, 0xea, 0xf1, 0xf8,
+/* gamma table from cam1690.ini */
+	{0x00, 0x00, 0x01, 0x04, 0x08, 0x0e, 0x16, 0x21,	/* 0 */
+	 0x2e, 0x3d, 0x50, 0x65, 0x7d, 0x99, 0xb8, 0xdb,
 	 0xff},
-	{0x00, 0x33, 0x5a, 0x75, 0x85, 0x93, 0xa1, 0xad,	/* 1 */
-	 0xb7, 0xc2, 0xcb, 0xd4, 0xde, 0xe7, 0xf0, 0xf7,
+	{0x00, 0x01, 0x03, 0x08, 0x0e, 0x16, 0x21, 0x2d,	/* 1 */
+	 0x3c, 0x4d, 0x60, 0x75, 0x8d, 0xa6, 0xc2, 0xe1,
 	 0xff},
-	{0x00, 0x2f, 0x51, 0x6b, 0x7c, 0x8a, 0x99, 0xa6,	/* 2 */
-	 0xb1, 0xbc, 0xc6, 0xd0, 0xdb, 0xe4, 0xed, 0xf6,
+	{0x00, 0x01, 0x05, 0x0b, 0x12, 0x1c, 0x28, 0x35,	/* 2 */
+	 0x45, 0x56, 0x69, 0x7e, 0x95, 0xad, 0xc7, 0xe3,
 	 0xff},
-	{0x00, 0x29, 0x48, 0x60, 0x72, 0x81, 0x90, 0x9e,	/* 3 */
-	 0xaa, 0xb5, 0xbf, 0xcb, 0xd6, 0xe1, 0xeb, 0xf5,
+	{0x00, 0x02, 0x07, 0x0f, 0x18, 0x24, 0x30, 0x3f,	/* 3 */
+	 0x4f, 0x61, 0x73, 0x88, 0x9d, 0xb4, 0xcd, 0xe6,
 	 0xff},
-	{0x00, 0x23, 0x3f, 0x55, 0x68, 0x77, 0x86, 0x95,	/* 4 */
-	 0xa2, 0xad, 0xb9, 0xc6, 0xd2, 0xde, 0xe9, 0xf4,
+	{0x00, 0x04, 0x0B, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
+	 0x5b, 0x6c, 0x7f, 0x92, 0xa7, 0xbc, 0xd2, 0xe9,
 	 0xff},
-	{0x00, 0x1b, 0x33, 0x48, 0x59, 0x69, 0x79, 0x87,	/* 5 */
-	 0x96, 0xa3, 0xb1, 0xbe, 0xcc, 0xda, 0xe7, 0xf3,
+	{0x00, 0x07, 0x11, 0x15, 0x20, 0x2d, 0x48, 0x58,	/* 5 */
+	 0x68, 0x79, 0x8b, 0x9d, 0xb0, 0xc4, 0xd7, 0xec,
 	 0xff},
-	{0x00, 0x02, 0x10, 0x20, 0x32, 0x40, 0x57, 0x67,	/* 6 */
+	{0x00, 0x0c, 0x1a, 0x29, 0x38, 0x47, 0x57, 0x67,	/* 6 */
 	 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee,
 	 0xff},
-	{0x00, 0x02, 0x14, 0x26, 0x38, 0x4a, 0x60, 0x70,	/* 7 */
+	{0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70,	/* 7 */
 	 0x80, 0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0,
 	 0xff},
-	{0x00, 0x10, 0x22, 0x35, 0x47, 0x5a, 0x69, 0x79,	/* 8 */
-	 0x88, 0x97, 0xa7, 0xb6, 0xc4, 0xd3, 0xe0, 0xf0,
+	{0x00, 0x15, 0x27, 0x38, 0x49, 0x59, 0x69, 0x79,	/* 8 */
+	 0x88, 0x97, 0xa7, 0xb6, 0xc4, 0xd3, 0xe2, 0xf0,
 	 0xff},
-	{0x00, 0x10, 0x26, 0x40, 0x54, 0x65, 0x75, 0x84,	/* 9 */
-	 0x93, 0xa1, 0xb0, 0xbd, 0xca, 0xd6, 0xe0, 0xf0,
+	{0x00, 0x1c, 0x30, 0x43, 0x54, 0x65, 0x75, 0x84,	/* 9 */
+	 0x93, 0xa1, 0xb0, 0xbd, 0xca, 0xd8, 0xe5, 0xf2,
 	 0xff},
-	{0x00, 0x18, 0x2b, 0x44, 0x60, 0x70, 0x80, 0x8e,	/* 10 */
-	 0x9c, 0xaa, 0xb7, 0xc4, 0xd0, 0xd8, 0xe2, 0xf0,
+	{0x00, 0x24, 0x3b, 0x4f, 0x60, 0x70, 0x80, 0x8e,	/* 10 */
+	 0x9c, 0xaa, 0xb7, 0xc4, 0xd0, 0xdc, 0xe8, 0xf3,
 	 0xff},
-	{0x00, 0x1a, 0x34, 0x52, 0x66, 0x7e, 0x8d, 0x9b,	/* 11 */
+	{0x00, 0x2a, 0x3c, 0x5d, 0x6e, 0x7e, 0x8d, 0x9b,	/* 11 */
 	 0xa8, 0xb4, 0xc0, 0xcb, 0xd6, 0xe1, 0xeb, 0xf5,
 	 0xff},
 	{0x00, 0x3f, 0x5a, 0x6e, 0x7f, 0x8e, 0x9c, 0xa8,	/* 12 */
@@ -577,12 +572,11 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 	} else {
 		u8 *tmpbuf;
 
-		tmpbuf = kmalloc(len, GFP_KERNEL);
+		tmpbuf = kmemdup(buffer, len, GFP_KERNEL);
 		if (!tmpbuf) {
 			err("Out of memory");
 			return;
 		}
-		memcpy(tmpbuf, buffer, len);
 		usb_control_msg(gspca_dev->dev,
 				usb_sndctrlpipe(gspca_dev->dev, 0),
 				0,
@@ -625,7 +619,6 @@ static void reg_w_ixbuf(struct gspca_dev *gspca_dev,
 		kfree(tmpbuf);
 }
 
-/* Reported as OM6802*/
 static void om6802_sensor_init(struct gspca_dev *gspca_dev)
 {
 	int i;
@@ -703,12 +696,12 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->autogain = AUTOGAIN_DEF;
 	sd->mirror = MIRROR_DEF;
 	sd->freq = FREQ_DEF;
-	sd->whitebalance = WHITE_BALANCE_DEF;
+	sd->awb = AWB_DEF;
 	sd->sharpness = SHARPNESS_DEF;
 	sd->effect = EFFECTS_DEF;
-	sd->red_balance = RED_BALANCE_DEF;
-	sd->blue_balance = BLUE_BALANCE_DEF;
-	sd->global_gain = global_gain_DEF;
+	sd->red_gain = RED_GAIN_DEF;
+	sd->blue_gain = BLUE_GAIN_DEF;
+	sd->green_gain = GAIN_DEF * 3 - RED_GAIN_DEF - BLUE_GAIN_DEF;
 
 	return 0;
 }
@@ -761,40 +754,59 @@ static void setgamma(struct gspca_dev *gspca_dev)
 	reg_w_ixbuf(gspca_dev, 0x90,
 		gamma_table[sd->gamma], sizeof gamma_table[0]);
 }
-static void setglobalgain(struct gspca_dev *gspca_dev)
-{
 
+static void setRGB(struct gspca_dev *gspca_dev)
+{
 	struct sd *sd = (struct sd *) gspca_dev;
-	reg_w(gspca_dev, (sd->red_balance  << 8) + 0x87);
-	reg_w(gspca_dev, (sd->blue_balance << 8) + 0x88);
-	reg_w(gspca_dev, (sd->global_gain  << 8) + 0x89);
+	u8 all_gain_reg[6] =
+		{0x87, 0x00, 0x88, 0x00, 0x89, 0x00};
+
+	all_gain_reg[1] = sd->red_gain;
+	all_gain_reg[3] = sd->blue_gain;
+	all_gain_reg[5] = sd->green_gain;
+	reg_w_buf(gspca_dev, all_gain_reg, sizeof all_gain_reg);
 }
 
-/* Generic fnc for r/b balance, exposure and whitebalance */
-static void setbalance(struct gspca_dev *gspca_dev)
+/* Generic fnc for r/b balance, exposure and awb */
+static void setawb(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	u16 reg80;
 
-	/* on whitebalance leave defaults values */
-	if (sd->whitebalance) {
-		reg_w(gspca_dev, 0x3c80);
-	} else {
-		reg_w(gspca_dev, 0x3880);
+	reg80 = (sensor_data[sd->sensor].reg80 << 8) | 0x80;
+
+	/* on awb leave defaults values */
+	if (!sd->awb) {
 		/* shoud we wait here.. */
-		/* update and reset 'global gain' with webcam parameters */
-		sd->red_balance = reg_r(gspca_dev, 0x0087);
-		sd->blue_balance = reg_r(gspca_dev, 0x0088);
-		sd->global_gain = reg_r(gspca_dev, 0x0089);
-		setglobalgain(gspca_dev);
+		/* update and reset RGB gains with webcam values */
+		sd->red_gain = reg_r(gspca_dev, 0x0087);
+		sd->blue_gain = reg_r(gspca_dev, 0x0088);
+		sd->green_gain = reg_r(gspca_dev, 0x0089);
+		reg80 &= ~0x0400;		/* AWB off */
 	}
-
+	reg_w(gspca_dev, reg80);
+	reg_w(gspca_dev, reg80);
 }
 
-
-
-static void setwhitebalance(struct gspca_dev *gspca_dev)
+static void init_gains(struct gspca_dev *gspca_dev)
 {
-	setbalance(gspca_dev);
+	struct sd *sd = (struct sd *) gspca_dev;
+	u16 reg80;
+	u8 all_gain_reg[8] =
+		{0x87, 0x00, 0x88, 0x00, 0x89, 0x00, 0x80, 0x00};
+
+	all_gain_reg[1] = sd->red_gain;
+	all_gain_reg[3] = sd->blue_gain;
+	all_gain_reg[5] = sd->green_gain;
+	reg80 = sensor_data[sd->sensor].reg80;
+	if (!sd->awb)
+		reg80 &= ~0x04;
+	all_gain_reg[7] = reg80;
+	reg_w_buf(gspca_dev, all_gain_reg, sizeof all_gain_reg);
+
+	reg_w(gspca_dev, (sd->red_gain  << 8) + 0x87);
+	reg_w(gspca_dev, (sd->blue_gain << 8) + 0x88);
+	reg_w(gspca_dev, (sd->green_gain  << 8) + 0x89);
 }
 
 static void setsharpness(struct gspca_dev *gspca_dev)
@@ -807,6 +819,38 @@ static void setsharpness(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, reg_to_write);
 }
 
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 reg66;
+	u8 freq[4] = { 0x66, 0x00, 0xa8, 0xe8 };
+
+	switch (sd->sensor) {
+	case SENSOR_LT168G:
+		if (sd->freq != 0)
+			freq[3] = 0xa8;
+		reg66 = 0x41;
+		break;
+	case SENSOR_OM6802:
+		reg66 = 0xca;
+		break;
+	default:
+		reg66 = 0x40;
+		break;
+	}
+	switch (sd->freq) {
+	case 0:				/* no flicker */
+		freq[3] = 0xf0;
+		break;
+	case 2:				/* 60Hz */
+		reg66 &= ~0x40;
+		break;
+	}
+	freq[1] = reg66;
+
+	reg_w_buf(gspca_dev, freq, sizeof freq);
+}
+
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
@@ -901,13 +945,9 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	setgamma(gspca_dev);
 	setcolors(gspca_dev);
 	setsharpness(gspca_dev);
-	setwhitebalance(gspca_dev);
-
-	reg_w(gspca_dev, 0x2087);	/* tied to white balance? */
-	reg_w(gspca_dev, 0x2088);
-	reg_w(gspca_dev, 0x2089);
+	init_gains(gspca_dev);
+	setfreq(gspca_dev);
 
-	reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4);
 	reg_w_buf(gspca_dev, sensor->data5, sizeof sensor->data5);
 	reg_w_buf(gspca_dev, sensor->nset8, sizeof sensor->nset8);
 	reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream);
@@ -926,16 +966,16 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
-static void setflip(struct gspca_dev *gspca_dev)
+static void setmirror(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 flipcmd[8] =
+	u8 hflipcmd[8] =
 		{0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09};
 
 	if (sd->mirror)
-		flipcmd[3] = 0x01;
+		hflipcmd[3] = 0x01;
 
-	reg_w_buf(gspca_dev, flipcmd, sizeof flipcmd);
+	reg_w_buf(gspca_dev, hflipcmd, sizeof hflipcmd);
 }
 
 static void seteffect(struct gspca_dev *gspca_dev)
@@ -956,17 +996,6 @@ static void seteffect(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0xfaa6);
 }
 
-static void setlightfreq(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	u8 freq[4] = { 0x66, 0x40, 0xa8, 0xe8 };
-
-	if (sd->freq == 2)	/* 60hz */
-		freq[1] = 0x00;
-
-	reg_w_buf(gspca_dev, freq, sizeof freq);
-}
-
 /* Is this really needed?
  * i added some module parameters for test with some users */
 static void poll_sensor(struct gspca_dev *gspca_dev)
@@ -979,9 +1008,7 @@ static void poll_sensor(struct gspca_dev *gspca_dev)
 	static const u8 poll2[] =
 		{0x67, 0x02, 0x68, 0x71, 0x69, 0x72, 0x72, 0xa9,
 		 0x73, 0x02, 0x73, 0x02, 0x60, 0x14};
-	static const u8 poll3[] =
-		{0x87, 0x3f, 0x88, 0x20, 0x89, 0x2d};
-	static const u8 poll4[] =
+	static const u8 noise03[] =	/* (some differences / ms-drv) */
 		{0xa6, 0x0a, 0xea, 0xcf, 0xbe, 0x26, 0xb1, 0x5f,
 		 0xa1, 0xb1, 0xda, 0x6b, 0xdb, 0x98, 0xdf, 0x0c,
 		 0xc2, 0x80, 0xc3, 0x10};
@@ -989,8 +1016,7 @@ static void poll_sensor(struct gspca_dev *gspca_dev)
 	PDEBUG(D_STREAM, "[Sensor requires polling]");
 	reg_w_buf(gspca_dev, poll1, sizeof poll1);
 	reg_w_buf(gspca_dev, poll2, sizeof poll2);
-	reg_w_buf(gspca_dev, poll3, sizeof poll3);
-	reg_w_buf(gspca_dev, poll4, sizeof poll4);
+	reg_w_buf(gspca_dev, noise03, sizeof noise03);
 }
 
 static int sd_start(struct gspca_dev *gspca_dev)
@@ -1025,12 +1051,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OM6802:
 		om6802_sensor_init(gspca_dev);
 		break;
-	case SENSOR_LT168G:
-		break;
-	case SENSOR_OTHER:
-		break;
-	default:
-/*	case SENSOR_TAS5130A: */
+	case SENSOR_TAS5130A:
 		i = 0;
 		for (;;) {
 			reg_w_buf(gspca_dev, tas5130a_sensor_init[i],
@@ -1047,7 +1068,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		break;
 	}
 	sensor = &sensor_data[sd->sensor];
-	reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4);
+	setfreq(gspca_dev);
 	reg_r(gspca_dev, 0x0012);
 	reg_w_buf(gspca_dev, t2, sizeof t2);
 	reg_w_ixbuf(gspca_dev, 0xb3, t3, sizeof t3);
@@ -1080,7 +1101,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	static u8 ffd9[] = { 0xff, 0xd9 };
+	int pkt_type;
 
 	if (data[0] == 0x5a) {
 		/* Control Packet, after this came the header again,
@@ -1090,84 +1111,88 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 	data += 2;
 	len -= 2;
-	if (data[0] == 0xff && data[1] == 0xd8) {
-		/* extra bytes....., could be processed too but would be
-		 * a waste of time, right now leave the application and
-		 * libjpeg do it for ourserlves.. */
-		gspca_frame_add(gspca_dev, LAST_PACKET,
-					ffd9, 2);
-		gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
-		return;
-	}
-
-	if (data[len - 2] == 0xff && data[len - 1] == 0xd9) {
-		/* Just in case, i have seen packets with the marker,
-		 * other's do not include it... */
-		len -= 2;
-	}
-	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+	if (data[0] == 0xff && data[1] == 0xd8)
+		pkt_type = FIRST_PACKET;
+	else if (data[len - 2] == 0xff && data[len - 1] == 0xd9)
+		pkt_type = LAST_PACKET;
+	else
+		pkt_type = INTER_PACKET;
+	gspca_frame_add(gspca_dev, pkt_type, data, len);
 }
 
-
-static int sd_setblue_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setblue_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->blue_balance = val;
+	sd->blue_gain = val;
 	if (gspca_dev->streaming)
 		reg_w(gspca_dev, (val << 8) + 0x88);
 	return 0;
 }
 
-static int sd_getblue_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getblue_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	*val = sd->blue_balance;
+	*val = sd->blue_gain;
 	return 0;
 }
 
-static int sd_setred_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setred_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->red_balance = val;
+	sd->red_gain = val;
 	if (gspca_dev->streaming)
 		reg_w(gspca_dev, (val << 8) + 0x87);
 
 	return 0;
 }
 
-static int sd_getred_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getred_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	*val = sd->red_balance;
+	*val = sd->red_gain;
 	return 0;
 }
 
-
-
-static int sd_setglobal_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	u16 psg, nsg;
+
+	psg = sd->red_gain + sd->blue_gain + sd->green_gain;
+	nsg = val * 3;
+	sd->red_gain = sd->red_gain * nsg / psg;
+	if (sd->red_gain > 0x40)
+		sd->red_gain = 0x40;
+	else if (sd->red_gain < 0x10)
+		sd->red_gain = 0x10;
+	sd->blue_gain = sd->blue_gain * nsg / psg;
+	if (sd->blue_gain > 0x40)
+		sd->blue_gain = 0x40;
+	else if (sd->blue_gain < 0x10)
+		sd->blue_gain = 0x10;
+	sd->green_gain = sd->green_gain * nsg / psg;
+	if (sd->green_gain > 0x40)
+		sd->green_gain = 0x40;
+	else if (sd->green_gain < 0x10)
+		sd->green_gain = 0x10;
 
-	sd->global_gain = val;
 	if (gspca_dev->streaming)
-		setglobalgain(gspca_dev);
-
+		setRGB(gspca_dev);
 	return 0;
 }
 
-static int sd_getglobal_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	*val = sd->global_gain;
+	*val = (sd->red_gain + sd->blue_gain + sd->green_gain) / 3;
 	return 0;
 }
 
-
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1186,35 +1211,35 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 	return *val;
 }
 
-static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->whitebalance = val;
+	sd->awb = val;
 	if (gspca_dev->streaming)
-		setwhitebalance(gspca_dev);
+		setawb(gspca_dev);
 	return 0;
 }
 
-static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	*val = sd->whitebalance;
+	*val = sd->awb;
 	return *val;
 }
 
-static int sd_setflip(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setmirror(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->mirror = val;
 	if (gspca_dev->streaming)
-		setflip(gspca_dev);
+		setmirror(gspca_dev);
 	return 0;
 }
 
-static int sd_getflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getmirror(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -1300,7 +1325,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
 
 	sd->freq = val;
 	if (gspca_dev->streaming)
-		setlightfreq(gspca_dev);
+		setfreq(gspca_dev);
 	return 0;
 }
 
@@ -1368,7 +1393,8 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 	case V4L2_CID_EFFECTS:
 		if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) {
 			strncpy((char *) menu->name,
-				effects_control[menu->index], 32);
+				effects_control[menu->index],
+				sizeof menu->name);
 			return 0;
 		}
 		break;
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index c7b6eb1e04d..d9c5bf3449d 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -30,29 +30,46 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	__u16 brightness;
+	__u16 exposure;
+	__u16 gain;
 
 	__u8 packet;
 };
 
 /* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
 
 static const struct ctrl sd_ctrls[] = {
 	{
 	 {
-	  .id = V4L2_CID_BRIGHTNESS,
+	  .id = V4L2_CID_EXPOSURE,
 	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "Brightness",
+	  .name = "Exposure",
 	  .minimum = 1,
-	  .maximum = 0x15f,	/* = 352 - 1 */
+	  .maximum = 0x18f,
 	  .step = 1,
-#define BRIGHTNESS_DEF 0x14c
-	  .default_value = BRIGHTNESS_DEF,
+#define EXPOSURE_DEF 0x18f
+	  .default_value = EXPOSURE_DEF,
 	  },
-	 .set = sd_setbrightness,
-	 .get = sd_getbrightness,
+	 .set = sd_setexposure,
+	 .get = sd_getexposure,
+	 },
+	{
+	 {
+	  .id = V4L2_CID_GAIN,
+	  .type = V4L2_CTRL_TYPE_INTEGER,
+	  .name = "Gain",
+	  .minimum = 0,
+	  .maximum = 0x7ff,
+	  .step = 1,
+#define GAIN_DEF 0x100
+	  .default_value = GAIN_DEF,
+	  },
+	 .set = sd_setgain,
+	 .get = sd_getgain,
 	 },
 };
 
@@ -92,6 +109,14 @@ static const struct v4l2_pix_format sif_mode[] = {
 #define R14_AD_ROW_BEGINL 0x14
 #define R15_AD_ROWBEGINH  0x15
 #define R1C_AD_EXPOSE_TIMEL 0x1c
+#define R20_GAIN_G1L	0x20
+#define R21_GAIN_G1H	0x21
+#define R22_GAIN_RL	0x22
+#define R23_GAIN_RH	0x23
+#define R24_GAIN_BL	0x24
+#define R25_GAIN_BH	0x25
+#define R26_GAIN_G2L	0x26
+#define R27_GAIN_G2H	0x27
 #define R28_QUANT	0x28
 #define R29_LINE	0x29
 #define R2C_POLARITY	0x2c
@@ -129,18 +154,6 @@ static const u8 eeprom_data[][3] = {
 	{0x05, 0x09, 0xf1},
 };
 
-static int reg_r(struct gspca_dev *gspca_dev,
-		 __u16 index)
-{
-	usb_control_msg(gspca_dev->dev,
-			usb_rcvctrlpipe(gspca_dev->dev, 0),
-			0x03,
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0,	/* value */
-			index, gspca_dev->usb_buf, 1,
-			500);
-	return gspca_dev->usb_buf[0];
-}
 
 /* write 1 byte */
 static void reg_w1(struct gspca_dev *gspca_dev,
@@ -183,7 +196,6 @@ static void tv_8532WriteEEprom(struct gspca_dev *gspca_dev)
 	}
 	reg_w1(gspca_dev, R07_TABLE_LEN, i);
 	reg_w1(gspca_dev, R01_TIMING_CONTROL_LOW, CMD_EEprom_Close);
-	msleep(10);
 }
 
 /* this function is called at probe time */
@@ -197,53 +209,13 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam->cam_mode = sif_mode;
 	cam->nmodes = ARRAY_SIZE(sif_mode);
 
-	sd->brightness = BRIGHTNESS_DEF;
+	sd->exposure = EXPOSURE_DEF;
+	sd->gain = GAIN_DEF;
 	return 0;
 }
 
-static void tv_8532ReadRegisters(struct gspca_dev *gspca_dev)
-{
-	int i;
-	static u8 reg_tb[] = {
-		R0C_AD_WIDTHL,
-		R0D_AD_WIDTHH,
-		R28_QUANT,
-		R29_LINE,
-		R2C_POLARITY,
-		R2D_POINT,
-		R2E_POINTH,
-		R2F_POINTB,
-		R30_POINTBH,
-		R2A_HIGH_BUDGET,
-		R2B_LOW_BUDGET,
-		R34_VID,
-		R35_VIDH,
-		R36_PID,
-		R37_PIDH,
-		R83_AD_IDH,
-		R10_AD_COL_BEGINL,
-		R11_AD_COL_BEGINH,
-		R14_AD_ROW_BEGINL,
-		R15_AD_ROWBEGINH,
-		0
-	};
-
-	i = 0;
-	do {
-		reg_r(gspca_dev, reg_tb[i]);
-		i++;
-	} while (reg_tb[i] != 0);
-}
-
 static void tv_8532_setReg(struct gspca_dev *gspca_dev)
 {
-	reg_w1(gspca_dev, R10_AD_COL_BEGINL, 0x44);
-						/* begin active line */
-	reg_w1(gspca_dev, R11_AD_COL_BEGINH, 0x00);
-						/* mirror and digital gain */
-	reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE);
-						/* = 0x84 */
-
 	reg_w1(gspca_dev, R3B_Test3, 0x0a);	/* Test0Sel = 10 */
 	/******************************************************/
 	reg_w1(gspca_dev, R0E_AD_HEIGHTL, 0x90);
@@ -255,100 +227,43 @@ static void tv_8532_setReg(struct gspca_dev *gspca_dev)
 						/* mirror and digital gain */
 	reg_w1(gspca_dev, R14_AD_ROW_BEGINL, 0x0a);
 
-	reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x00);
 	reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x02);
-
-	reg_w1(gspca_dev, R01_TIMING_CONTROL_LOW, CMD_EEprom_Close);
-
 	reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x00);
 	reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE);
 						/* = 0x84 */
 }
 
-static void tv_8532_PollReg(struct gspca_dev *gspca_dev)
-{
-	int i;
-
-	/* strange polling from tgc */
-	for (i = 0; i < 10; i++) {
-		reg_w1(gspca_dev, R2C_POLARITY, 0x10);
-		reg_w1(gspca_dev, R00_PART_CONTROL,
-				LATENT_CHANGE | EXPO_CHANGE);
-		reg_w1(gspca_dev, R31_UPD, 0x01);
-	}
-}
-
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
 	tv_8532WriteEEprom(gspca_dev);
 
-	reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x32);	/* slope begin 1,7V,
-							 * slope rate 2 */
-	reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x00);
-	tv_8532ReadRegisters(gspca_dev);
-	reg_w1(gspca_dev, R3B_Test3, 0x0b);
-	reg_w2(gspca_dev, R0E_AD_HEIGHTL, 0x0190);
-	reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, 0x018f);
-	reg_w1(gspca_dev, R0C_AD_WIDTHL, 0xe8);
-	reg_w1(gspca_dev, R0D_AD_WIDTHH, 0x03);
-
-	/*******************************************************************/
-	reg_w1(gspca_dev, R28_QUANT, 0x90);
-					/* no compress - fixed Q - quant 0 */
-	reg_w1(gspca_dev, R29_LINE, 0x81);
-					/* 0x84; // CIF | 4 packet 0x29 */
-
-	/************************************************/
-	reg_w1(gspca_dev, R2C_POLARITY, 0x10);
-						/* 0x48; //0x08; 0x2c */
-	reg_w1(gspca_dev, R2D_POINT, 0x14);
-						/* 0x38; 0x2d */
-	reg_w1(gspca_dev, R2E_POINTH, 0x01);
-						/* 0x04; 0x2e */
-	reg_w1(gspca_dev, R2F_POINTB, 0x12);
-						/* 0x04; 0x2f */
-	reg_w1(gspca_dev, R30_POINTBH, 0x01);
-						/* 0x04; 0x30 */
-	reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE);
-						/* 0x00<-0x84 */
-	/*************************************************/
-	reg_w1(gspca_dev, R31_UPD, 0x01);	/* update registers */
-	msleep(200);
-	reg_w1(gspca_dev, R31_UPD, 0x00);		/* end update */
-	/*************************************************/
-	tv_8532_setReg(gspca_dev);
-	/*************************************************/
-	reg_w1(gspca_dev, R3B_Test3, 0x0b);	/* Test0Sel = 11 = GPIO */
-	/*************************************************/
-	tv_8532_setReg(gspca_dev);
-	/*************************************************/
-	tv_8532_PollReg(gspca_dev);
 	return 0;
 }
 
-static void setbrightness(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, sd->brightness);
+	reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, sd->exposure);
 	reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE);
 						/* 0x84 */
 }
 
-/* -- start the camera -- */
-static int sd_start(struct gspca_dev *gspca_dev)
+static void setgain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x32);	/* slope begin 1,7V,
-							 * slope rate 2 */
-	reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x00);
-	tv_8532ReadRegisters(gspca_dev);
-	reg_w1(gspca_dev, R3B_Test3, 0x0b);
+	reg_w2(gspca_dev, R20_GAIN_G1L, sd->gain);
+	reg_w2(gspca_dev, R22_GAIN_RL, sd->gain);
+	reg_w2(gspca_dev, R24_GAIN_BL, sd->gain);
+	reg_w2(gspca_dev, R26_GAIN_G2L, sd->gain);
+}
 
-	reg_w2(gspca_dev, R0E_AD_HEIGHTL, 0x0190);
-	setbrightness(gspca_dev);
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
 
 	reg_w1(gspca_dev, R0C_AD_WIDTHL, 0xe8);		/* 0x20; 0x0c */
 	reg_w1(gspca_dev, R0D_AD_WIDTHH, 0x03);
@@ -371,19 +286,15 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, R2E_POINTH, 0x01);
 	reg_w1(gspca_dev, R2F_POINTB, 0x12);
 	reg_w1(gspca_dev, R30_POINTBH, 0x01);
-	reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE);
+
+	tv_8532_setReg(gspca_dev);
+
+	setexposure(gspca_dev);
+	setgain(gspca_dev);
+
 	/************************************************/
 	reg_w1(gspca_dev, R31_UPD, 0x01);	/* update registers */
 	msleep(200);
-	reg_w1(gspca_dev, R31_UPD, 0x00);		/* end update */
-	/************************************************/
-	tv_8532_setReg(gspca_dev);
-	/************************************************/
-	reg_w1(gspca_dev, R3B_Test3, 0x0b);	/* Test0Sel = 11 = GPIO */
-	/************************************************/
-	tv_8532_setReg(gspca_dev);
-	/************************************************/
-	tv_8532_PollReg(gspca_dev);
 	reg_w1(gspca_dev, R31_UPD, 0x00);	/* end update */
 
 	gspca_dev->empty_packet = 0;		/* check the empty packets */
@@ -428,21 +339,39 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			data + gspca_dev->width + 5, gspca_dev->width);
 }
 
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->brightness = val;
+	sd->gain = val;
 	if (gspca_dev->streaming)
-		setbrightness(gspca_dev);
+		setgain(gspca_dev);
 	return 0;
 }
 
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	*val = sd->brightness;
+	*val = sd->gain;
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 732c3dfe46f..031266a4081 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -2748,11 +2748,11 @@ static const u8 poxxxx_init_common[][4] = {
 	{0xb3, 0x04, 0x15, 0xcc},
 	{0xb3, 0x20, 0x00, 0xcc},
 	{0xb3, 0x21, 0x00, 0xcc},
-	{0xb3, 0x22, 0x04, 0xcc},
+	{0xb3, 0x22, 0x04, 0xcc},	/* sensor height = 1024 */
 	{0xb3, 0x23, 0x00, 0xcc},
 	{0xb3, 0x14, 0x00, 0xcc},
 	{0xb3, 0x15, 0x00, 0xcc},
-	{0xb3, 0x16, 0x04, 0xcc},
+	{0xb3, 0x16, 0x04, 0xcc},	/* sensor width = 1280 */
 	{0xb3, 0x17, 0xff, 0xcc},
 	{0xb3, 0x2c, 0x03, 0xcc},
 	{0xb3, 0x2d, 0x56, 0xcc},
@@ -2919,7 +2919,7 @@ static const u8 poxxxx_initVGA[][4] = {
 	{0x00, 0x20, 0x11, 0xaa},
 	{0x00, 0x33, 0x38, 0xaa},
 	{0x00, 0xbb, 0x0d, 0xaa},
-	{0xb3, 0x22, 0x01, 0xcc},
+	{0xb3, 0x22, 0x01, 0xcc},	/* change to 640x480 */
 	{0xb3, 0x23, 0xe0, 0xcc},
 	{0xb3, 0x16, 0x02, 0xcc},
 	{0xb3, 0x17, 0x7f, 0xcc},
@@ -2935,7 +2935,7 @@ static const u8 poxxxx_initQVGA[][4] = {
 	{0x00, 0x20, 0x33, 0xaa},
 	{0x00, 0x33, 0x38, 0xaa},
 	{0x00, 0xbb, 0x0d, 0xaa},
-	{0xb3, 0x22, 0x00, 0xcc},
+	{0xb3, 0x22, 0x00, 0xcc},	/* change to 320x240 */
 	{0xb3, 0x23, 0xf0, 0xcc},
 	{0xb3, 0x16, 0x01, 0xcc},
 	{0xb3, 0x17, 0x3f, 0xcc},
@@ -3068,37 +3068,84 @@ static const struct sensor_info vc0323_probe_data[] = {
 };
 
 /* read 'len' bytes in gspca_dev->usb_buf */
-static void reg_r(struct gspca_dev *gspca_dev,
+static void reg_r_i(struct gspca_dev *gspca_dev,
 		  u16 req,
 		  u16 index,
 		  u16 len)
 {
-	usb_control_msg(gspca_dev->dev,
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(gspca_dev->dev,
 			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			1,			/* value */
 			index, gspca_dev->usb_buf, len,
 			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_r err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+static void reg_r(struct gspca_dev *gspca_dev,
+		  u16 req,
+		  u16 index,
+		  u16 len)
+{
+	reg_r_i(gspca_dev, req, index, len);
+#ifdef GSPCA_DEBUG
+	if (gspca_dev->usb_err < 0)
+		return;
+	if (len == 1)
+		PDEBUG(D_USBI, "GET %02x 0001 %04x %02x", req, index,
+				gspca_dev->usb_buf[0]);
+	else
+		PDEBUG(D_USBI, "GET %02x 0001 %04x %02x %02x %02x",
+				req, index,
+				gspca_dev->usb_buf[0],
+				gspca_dev->usb_buf[1],
+				gspca_dev->usb_buf[2]);
+#endif
 }
 
-static void reg_w(struct usb_device *dev,
+static void reg_w_i(struct gspca_dev *gspca_dev,
 			    u16 req,
 			    u16 value,
 			    u16 index)
 {
-	usb_control_msg(dev,
-			usb_sndctrlpipe(dev, 0),
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			value, index, NULL, 0,
 			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+static void reg_w(struct gspca_dev *gspca_dev,
+			    u16 req,
+			    u16 value,
+			    u16 index)
+{
+#ifdef GSPCA_DEBUG
+	if (gspca_dev->usb_err < 0)
+		return;
+	PDEBUG(D_USBO, "SET %02x %04x %04x", req, value, index);
+#endif
+	reg_w_i(gspca_dev, req, value, index);
 }
 
 static u16 read_sensor_register(struct gspca_dev *gspca_dev,
 				u16 address)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	u8 ldata, mdata, hdata;
 	int retry = 50;
 
@@ -3108,8 +3155,8 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev,
 			gspca_dev->usb_buf[0]);
 		return 0;
 	}
-	reg_w(dev, 0xa0, address, 0xb33a);
-	reg_w(dev, 0xa0, 0x02, 0xb339);
+	reg_w(gspca_dev, 0xa0, address, 0xb33a);
+	reg_w(gspca_dev, 0xa0, 0x02, 0xb339);
 
 	do {
 		reg_r(gspca_dev, 0xa1, 0xb33b, 1);
@@ -3136,15 +3183,15 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev,
 static int vc032x_probe_sensor(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int i, n;
 	u16 value;
 	const struct sensor_info *ptsensor_info;
 
 /*fixme: should also check the other sensor (back mi1320_soc, front mc501cb)*/
 	if (sd->flags & FL_SAMSUNG) {
-		reg_w(dev, 0xa0, 0x01, 0xb301);
-		reg_w(dev, 0x89, 0xf0ff, 0xffff); /* select the back sensor */
+		reg_w(gspca_dev, 0xa0, 0x01, 0xb301);
+		reg_w(gspca_dev, 0x89, 0xf0ff, 0xffff);
+						/* select the back sensor */
 	}
 
 	reg_r(gspca_dev, 0xa1, 0xbfcf, 1);
@@ -3158,13 +3205,13 @@ static int vc032x_probe_sensor(struct gspca_dev *gspca_dev)
 		n = ARRAY_SIZE(vc0323_probe_data);
 	}
 	for (i = 0; i < n; i++) {
-		reg_w(dev, 0xa0, 0x02, 0xb334);
-		reg_w(dev, 0xa0, ptsensor_info->m1, 0xb300);
-		reg_w(dev, 0xa0, ptsensor_info->m2, 0xb300);
-		reg_w(dev, 0xa0, 0x01, 0xb308);
-		reg_w(dev, 0xa0, 0x0c, 0xb309);
-		reg_w(dev, 0xa0, ptsensor_info->I2cAdd, 0xb335);
-		reg_w(dev, 0xa0, ptsensor_info->op, 0xb301);
+		reg_w(gspca_dev, 0xa0, 0x02, 0xb334);
+		reg_w(gspca_dev, 0xa0, ptsensor_info->m1, 0xb300);
+		reg_w(gspca_dev, 0xa0, ptsensor_info->m2, 0xb300);
+		reg_w(gspca_dev, 0xa0, 0x01, 0xb308);
+		reg_w(gspca_dev, 0xa0, 0x0c, 0xb309);
+		reg_w(gspca_dev, 0xa0, ptsensor_info->I2cAdd, 0xb335);
+		reg_w(gspca_dev, 0xa0, ptsensor_info->op, 0xb301);
 		value = read_sensor_register(gspca_dev, ptsensor_info->IdAdd);
 		if (value == 0 && ptsensor_info->IdAdd == 0x82)
 			value = read_sensor_register(gspca_dev, 0x83);
@@ -3192,26 +3239,33 @@ static void i2c_write(struct gspca_dev *gspca_dev,
 			u8 reg, const u8 *val,
 			u8 size)		/* 1 or 2 */
 {
-	struct usb_device *dev = gspca_dev->dev;
 	int retry;
 
-	reg_r(gspca_dev, 0xa1, 0xb33f, 1);
+#ifdef GSPCA_DEBUG
+	if (gspca_dev->usb_err < 0)
+		return;
+	if (size == 1)
+		PDEBUG(D_USBO, "i2c_w %02x %02x", reg, *val);
+	else
+		PDEBUG(D_USBO, "i2c_w %02x %02x%02x", reg, *val, val[1]);
+#endif
+	reg_r_i(gspca_dev, 0xa1, 0xb33f, 1);
 /*fixme:should check if (!(gspca_dev->usb_buf[0] & 0x02)) error*/
-	reg_w(dev, 0xa0, size, 0xb334);
-	reg_w(dev, 0xa0, reg, 0xb33a);
-	reg_w(dev, 0xa0, val[0], 0xb336);
+	reg_w_i(gspca_dev, 0xa0, size, 0xb334);
+	reg_w_i(gspca_dev, 0xa0, reg, 0xb33a);
+	reg_w_i(gspca_dev, 0xa0, val[0], 0xb336);
 	if (size > 1)
-		reg_w(dev, 0xa0, val[1], 0xb337);
-	reg_w(dev, 0xa0, 0x01, 0xb339);
+		reg_w_i(gspca_dev, 0xa0, val[1], 0xb337);
+	reg_w_i(gspca_dev, 0xa0, 0x01, 0xb339);
 	retry = 4;
 	do {
-		reg_r(gspca_dev, 0xa1, 0xb33b, 1);
+		reg_r_i(gspca_dev, 0xa1, 0xb33b, 1);
 		if (gspca_dev->usb_buf[0] == 0)
 			break;
 		msleep(20);
 	} while (--retry > 0);
 	if (retry <= 0)
-		PDEBUG(D_ERR, "i2c_write failed");
+		PDEBUG(D_ERR, "i2c_write timeout");
 }
 
 static void put_tab_to_reg(struct gspca_dev *gspca_dev,
@@ -3221,13 +3275,12 @@ static void put_tab_to_reg(struct gspca_dev *gspca_dev,
 	u16 ad = addr;
 
 	for (j = 0; j < tabsize; j++)
-		reg_w(gspca_dev->dev, 0xa0, tab[j], ad++);
+		reg_w(gspca_dev, 0xa0, tab[j], ad++);
 }
 
 static void usb_exchange(struct gspca_dev *gspca_dev,
 			const u8 data[][4])
 {
-	struct usb_device *dev = gspca_dev->dev;
 	int i = 0;
 
 	for (;;) {
@@ -3235,7 +3288,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
 		default:
 			return;
 		case 0xcc:			/* normal write */
-			reg_w(dev, 0xa0, data[i][2],
+			reg_w(gspca_dev, 0xa0, data[i][2],
 					(data[i][0]) << 8 | data[i][1]);
 			break;
 		case 0xaa:			/* i2c op */
@@ -3259,7 +3312,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
 	int sensor;
 	static u8 npkt[] = {	/* number of packets per ISOC message */
@@ -3363,13 +3415,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	if (sd->sensor == SENSOR_OV7670)
 		sd->flags |= FL_HFLIP | FL_VFLIP;
 
-	if (sd->bridge == BRIDGE_VC0321) {
-		reg_r(gspca_dev, 0x8a, 0, 3);
-		reg_w(dev, 0x87, 0x00, 0x0f0f);
-
-		reg_r(gspca_dev, 0x8b, 0, 3);
-		reg_w(dev, 0x88, 0x00, 0x0202);
-	}
 	return 0;
 }
 
@@ -3378,15 +3423,21 @@ static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor == SENSOR_POxxxx) {
-		reg_r(gspca_dev, 0xa1, 0xb300, 1);
-		if (gspca_dev->usb_buf[0] != 0) {
-			reg_w(gspca_dev->dev, 0xa0, 0x26, 0xb300);
-			reg_w(gspca_dev->dev, 0xa0, 0x04, 0xb300);
-			reg_w(gspca_dev->dev, 0xa0, 0x00, 0xb300);
+	if (sd->bridge == BRIDGE_VC0321) {
+		reg_r(gspca_dev, 0x8a, 0, 3);
+		reg_w(gspca_dev, 0x87, 0x00, 0x0f0f);
+		reg_r(gspca_dev, 0x8b, 0, 3);
+		reg_w(gspca_dev, 0x88, 0x00, 0x0202);
+		if (sd->sensor == SENSOR_POxxxx) {
+			reg_r(gspca_dev, 0xa1, 0xb300, 1);
+			if (gspca_dev->usb_buf[0] != 0) {
+				reg_w(gspca_dev, 0xa0, 0x26, 0xb300);
+				reg_w(gspca_dev, 0xa0, 0x04, 0xb300);
+				reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
+			}
 		}
 	}
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -3516,17 +3567,17 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 /*fixme: back sensor only*/
 	if (sd->flags & FL_SAMSUNG) {
-		reg_w(gspca_dev->dev, 0x89, 0xf0ff, 0xffff);
-		reg_w(gspca_dev->dev, 0xa9, 0x8348, 0x000e);
-		reg_w(gspca_dev->dev, 0xa9, 0x0000, 0x001a);
+		reg_w(gspca_dev, 0x89, 0xf0ff, 0xffff);
+		reg_w(gspca_dev, 0xa9, 0x8348, 0x000e);
+		reg_w(gspca_dev, 0xa9, 0x0000, 0x001a);
 	}
 
 	/* Assume start use the good resolution from gspca_dev->mode */
 	if (sd->bridge == BRIDGE_VC0321) {
-		reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfec);
-		reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfed);
-		reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfee);
-		reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfef);
+		reg_w(gspca_dev, 0xa0, 0xff, 0xbfec);
+		reg_w(gspca_dev, 0xa0, 0xff, 0xbfed);
+		reg_w(gspca_dev, 0xa0, 0xff, 0xbfee);
+		reg_w(gspca_dev, 0xa0, 0xff, 0xbfef);
 		sd->image_offset = 46;
 	} else {
 		if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].pixelformat
@@ -3617,7 +3668,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			init = poxxxx_initVGA;
 		usb_exchange(gspca_dev, init);
 		reg_r(gspca_dev, 0x8c, 0x0000, 3);
-		reg_w(gspca_dev->dev, 0xa0,
+		reg_w(gspca_dev, 0xa0,
 				gspca_dev->usb_buf[2] & 1 ? 0 : 1,
 				0xb35c);
 		msleep(300);
@@ -3635,10 +3686,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		switch (sd->sensor) {
 		case SENSOR_PO1200:
 		case SENSOR_HV7131R:
-			reg_w(gspca_dev->dev, 0x89, 0x0400, 0x1415);
+			reg_w(gspca_dev, 0x89, 0x0400, 0x1415);
 			break;
 		case SENSOR_MI1310_SOC:
-			reg_w(gspca_dev->dev, 0x89, 0x058c, 0x0000);
+			reg_w(gspca_dev, 0x89, 0x058c, 0x0000);
 			break;
 		}
 		msleep(100);
@@ -3648,9 +3699,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	}
 	switch (sd->sensor) {
 	case SENSOR_OV7670:
-		reg_w(gspca_dev->dev, 0x87, 0xffff, 0xffff);
-		reg_w(gspca_dev->dev, 0x88, 0xff00, 0xf0f1);
-		reg_w(gspca_dev->dev, 0xa0, 0x0000, 0xbfff);
+		reg_w(gspca_dev, 0x87, 0xffff, 0xffff);
+		reg_w(gspca_dev, 0x88, 0xff00, 0xf0f1);
+		reg_w(gspca_dev, 0xa0, 0x0000, 0xbfff);
 		break;
 	case SENSOR_POxxxx:
 		setcolors(gspca_dev);
@@ -3659,51 +3710,49 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 		/* led on */
 		msleep(80);
-		reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
+		reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
 		usb_exchange(gspca_dev, poxxxx_init_end_2);
 		break;
 	}
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	switch (sd->sensor) {
 	case SENSOR_MI1310_SOC:
-		reg_w(dev, 0x89, 0x058c, 0x00ff);
+		reg_w(gspca_dev, 0x89, 0x058c, 0x00ff);
 		break;
 	case SENSOR_POxxxx:
 		return;
 	default:
 		if (!(sd->flags & FL_SAMSUNG))
-			reg_w(dev, 0x89, 0xffff, 0xffff);
+			reg_w(gspca_dev, 0x89, 0xffff, 0xffff);
 		break;
 	}
-	reg_w(dev, 0xa0, 0x01, 0xb301);
-	reg_w(dev, 0xa0, 0x09, 0xb003);
+	reg_w(gspca_dev, 0xa0, 0x01, 0xb301);
+	reg_w(gspca_dev, 0xa0, 0x09, 0xb003);
 }
 
 /* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	if (!gspca_dev->present)
 		return;
 /*fixme: is this useful?*/
 	if (sd->sensor == SENSOR_MI1310_SOC)
-		reg_w(dev, 0x89, 0x058c, 0x00ff);
+		reg_w(gspca_dev, 0x89, 0x058c, 0x00ff);
 	else if (!(sd->flags & FL_SAMSUNG))
-		reg_w(dev, 0x89, 0xffff, 0xffff);
+		reg_w(gspca_dev, 0x89, 0xffff, 0xffff);
 
 	if (sd->sensor == SENSOR_POxxxx) {
-		reg_w(dev, 0xa0, 0x26, 0xb300);
-		reg_w(dev, 0xa0, 0x04, 0xb300);
-		reg_w(dev, 0xa0, 0x00, 0xb300);
+		reg_w(gspca_dev, 0xa0, 0x26, 0xb300);
+		reg_w(gspca_dev, 0xa0, 0x04, 0xb300);
+		reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
 	}
 }
 
@@ -3726,17 +3775,12 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	/* The vc0321 sends some additional data after sending the complete
 	 * frame, we ignore this. */
 	if (sd->bridge == BRIDGE_VC0321) {
-		struct gspca_frame *frame;
-		int l;
+		int size, l;
 
-		frame = gspca_get_i_frame(gspca_dev);
-		if (frame == NULL) {
-			gspca_dev->last_packet_type = DISCARD_PACKET;
-			return;
-		}
-		l = frame->data_end - frame->data;
-		if (len > frame->v4l2_buf.length - l)
-			len = frame->v4l2_buf.length - l;
+		l = gspca_dev->image_len;
+		size = gspca_dev->frsz;
+		if (len > size - l)
+			len = size - l;
 	}
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
@@ -3748,7 +3792,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 	sd->brightness = val;
 	if (gspca_dev->streaming)
 		setbrightness(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3766,7 +3810,7 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	sd->contrast = val;
 	if (gspca_dev->streaming)
 		setcontrast(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3784,7 +3828,7 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val)
 	sd->colors = val;
 	if (gspca_dev->streaming)
 		setcolors(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3802,7 +3846,7 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
 	sd->hflip = val;
 	if (gspca_dev->streaming)
 		sethvflip(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3820,7 +3864,7 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
 	sd->vflip = val;
 	if (gspca_dev->streaming)
 		sethvflip(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3838,7 +3882,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
 	sd->lightfreq = val;
 	if (gspca_dev->streaming)
 		setlightfreq(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
@@ -3856,7 +3900,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
 	sd->sharpness = val;
 	if (gspca_dev->streaming)
 		setsharpness(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 2fffe203bed..38a68591ce4 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -31,14 +31,10 @@
    the sensor drivers to v4l2 sub drivers, and properly split of this
    driver from ov519.c */
 
-/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */
-#define CONEX_CAM
-#include "jpeg.h"
-
 #define W9968CF_I2C_BUS_DELAY    4 /* delay in us for I2C bit r/w operations */
 
-#define Y_QUANTABLE (sd->jpeg_hdr + JPEG_QT0_OFFSET)
-#define UV_QUANTABLE (sd->jpeg_hdr + JPEG_QT1_OFFSET)
+#define Y_QUANTABLE (&sd->jpeg_hdr[JPEG_QT0_OFFSET])
+#define UV_QUANTABLE (&sd->jpeg_hdr[JPEG_QT1_OFFSET])
 
 static const struct v4l2_pix_format w9968cf_vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE,
@@ -509,11 +505,6 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
 		/* We may get called multiple times (usb isoc bw negotiat.) */
-		if (!sd->jpeg_hdr)
-			sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-		if (!sd->jpeg_hdr)
-			return -ENOMEM;
-
 		jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
 			    sd->gspca_dev.width, 0x22); /* JPEG 420 */
 		jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -562,9 +553,6 @@ static void w9968cf_stop0(struct sd *sd)
 		reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
 		reg_w(sd, 0x16, 0x0000); /* stop video capture */
 	}
-
-	kfree(sd->jpeg_hdr);
-	sd->jpeg_hdr = NULL;
 }
 
 /* The w9968cf docs say that a 0 sized packet means EOF (and also SOF
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d02aa5c8472..4473f0fb8b7 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -22,7 +22,6 @@
 #define MODULE_NAME "zc3xx"
 
 #include <linux/input.h>
-#include <linux/slab.h>
 #include "gspca.h"
 #include "jpeg.h"
 
@@ -40,15 +39,16 @@ static int force_sensor = -1;
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
+	u8 brightness;
 	u8 contrast;
 	u8 gamma;
 	u8 autogain;
 	u8 lightfreq;
 	u8 sharpness;
 	u8 quality;			/* image quality */
-#define QUALITY_MIN 40
-#define QUALITY_MAX 60
-#define QUALITY_DEF 50
+#define QUALITY_MIN 50
+#define QUALITY_MAX 80
+#define QUALITY_DEF 70
 
 	u8 sensor;		/* Type of image sensor chip */
 /* !! values used in different tables */
@@ -75,10 +75,12 @@ struct sd {
 #define SENSOR_MAX 19
 	unsigned short chip_revision;
 
-	u8 *jpeg_hdr;
+	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
@@ -93,6 +95,20 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
 static const struct ctrl sd_ctrls[] = {
 	{
 	    {
+		.id      = V4L2_CID_BRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Brightness",
+		.minimum = 0,
+		.maximum = 255,
+		.step    = 1,
+#define BRIGHTNESS_DEF 128
+		.default_value = BRIGHTNESS_DEF,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+	    {
 		.id      = V4L2_CID_CONTRAST,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Contrast",
@@ -132,7 +148,7 @@ static const struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
-#define LIGHTFREQ_IDX 3
+#define LIGHTFREQ_IDX 4
 	{
 	    {
 		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -6011,9 +6027,12 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
 	const u8 *Tgamma;
-	int g, i, k, adj, gp;
+	int g, i, brightness, contrast, adj, gp1, gp2;
 	u8 gr[16];
-	static const u8 delta_tb[16] =		/* delta for contrast */
+	static const u8 delta_b[16] =		/* delta for brightness */
+		{0x50, 0x38, 0x2d, 0x28, 0x24, 0x21, 0x1e, 0x1d,
+		 0x1d, 0x1b, 0x1b, 0x1b, 0x19, 0x18, 0x18, 0x18};
+	static const u8 delta_c[16] =		/* delta for contrast */
 		{0x2c, 0x1a, 0x12, 0x0c, 0x0a, 0x06, 0x06, 0x06,
 		 0x04, 0x06, 0x04, 0x04, 0x03, 0x03, 0x02, 0x02};
 	static const u8 gamma_tb[6][16] = {
@@ -6033,30 +6052,30 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 
 	Tgamma = gamma_tb[sd->gamma - 1];
 
-	k = ((int) sd->contrast - 128);		/* -128 / 128 */
+	contrast = ((int) sd->contrast - 128);		/* -128 / 127 */
+	brightness = ((int) sd->brightness - 128);	/* -128 / 92 */
 	adj = 0;
-	gp = 0;
+	gp1 = gp2 = 0;
 	for (i = 0; i < 16; i++) {
-		g = Tgamma[i] - delta_tb[i] * k / 256 - adj / 2;
+		g = Tgamma[i] + delta_b[i] * brightness / 256
+				- delta_c[i] * contrast / 256 - adj / 2;
 		if (g > 0xff)
 			g = 0xff;
 		else if (g < 0)
 			g = 0;
 		reg_w(dev, g, 0x0120 + i);	/* gamma */
-		if (k > 0)
+		if (contrast > 0)
 			adj--;
-		else
+		else if (contrast < 0)
 			adj++;
-
-		if (i != 0) {
-			if (gp == 0)
-				gr[i - 1] = 0;
-			else
-				gr[i - 1] = g - gp;
-		}
-		gp = g;
+		if (i > 1)
+			gr[i - 1] = (g - gp2) / 2;
+		else if (i != 0)
+			gr[0] = gp1 == 0 ? 0 : (g - gp1);
+		gp2 = gp1;
+		gp1 = g;
 	}
-	gr[15] = gr[14] / 2;
+	gr[15] = (0xff - gp2) / 2;
 	for (i = 0; i < 16; i++)
 		reg_w(dev, gr[i], 0x0130 + i);	/* gradient */
 }
@@ -6744,6 +6763,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = ARRAY_SIZE(broken_vga_mode);
 		break;
 	}
+	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->gamma = gamma[sd->sensor];
 	sd->autogain = AUTOGAIN_DEF;
@@ -6798,9 +6818,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	};
 
 	/* create the JPEG header */
-	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
-	if (!sd->jpeg_hdr)
-		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
@@ -6918,10 +6935,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		reg_w(dev, 0x00, 0x0007);	/* (from win traces) */
 		reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
 		break;
-	case SENSOR_PAS202B:
-		reg_w(dev, 0x32, 0x0007);	/* (from win traces) */
-		reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
-		break;
 	}
 	return 0;
 }
@@ -6931,7 +6944,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	kfree(sd->jpeg_hdr);
 	if (!gspca_dev->present)
 		return;
 	send_unknown(gspca_dev->dev, sd->sensor);
@@ -6962,6 +6974,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
 
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->brightness = val;
+	if (gspca_dev->streaming)
+		setcontrast(gspca_dev);
+	return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->brightness;
+	return 0;
+}
+
 static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -7163,9 +7193,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08aa)},
 	{USB_DEVICE(0x046d, 0x08ac)},
 	{USB_DEVICE(0x046d, 0x08ad)},
-#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
 	{USB_DEVICE(0x046d, 0x08ae)},
-#endif
 	{USB_DEVICE(0x046d, 0x08af)},
 	{USB_DEVICE(0x046d, 0x08b9)},
 	{USB_DEVICE(0x046d, 0x08d7)},
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 830d47b05e1..0cae5b82e1a 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -286,6 +286,8 @@ static int hdpvr_probe(struct usb_interface *interface,
 		goto error;
 	}
 
+	dev->workqueue = 0;
+
 	/* register v4l2_device early so it can be used for printks */
 	if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) {
 		err("v4l2_device_register failed");
@@ -380,6 +382,9 @@ static int hdpvr_probe(struct usb_interface *interface,
 
 error:
 	if (dev) {
+		/* Destroy single thread */
+		if (dev->workqueue)
+			destroy_workqueue(dev->workqueue);
 		/* this frees allocated memory */
 		hdpvr_delete(dev);
 	}
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 7cfccfd1b87..4863a21b1f2 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -366,7 +366,7 @@ static int hdpvr_open(struct file *file)
 
 	dev = (struct hdpvr_device *)video_get_drvdata(video_devdata(file));
 	if (!dev) {
-		v4l2_err(&dev->v4l2_dev, "open failing with with ENODEV\n");
+		pr_err("open failing with with ENODEV\n");
 		retval = -ENODEV;
 		goto err;
 	}
@@ -394,7 +394,7 @@ err:
 
 static int hdpvr_release(struct file *file)
 {
-	struct hdpvr_fh		*fh  = (struct hdpvr_fh *)file->private_data;
+	struct hdpvr_fh		*fh  = file->private_data;
 	struct hdpvr_device	*dev = fh->dev;
 
 	if (!dev)
@@ -518,7 +518,7 @@ err:
 static unsigned int hdpvr_poll(struct file *filp, poll_table *wait)
 {
 	struct hdpvr_buffer *buf = NULL;
-	struct hdpvr_fh *fh = (struct hdpvr_fh *)filp->private_data;
+	struct hdpvr_fh *fh = filp->private_data;
 	struct hdpvr_device *dev = fh->dev;
 	unsigned int mask = 0;
 
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 29d43974265..27ae8bbfb47 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -47,7 +47,7 @@
 #include <linux/i2c-id.h>
 #include <linux/workqueue.h>
 
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <media/ir-kbd-i2c.h>
 
 /* ----------------------------------------------------------------------- */
@@ -272,11 +272,8 @@ static void ir_key_poll(struct IR_i2c *ir)
 		return;
 	}
 
-	if (0 == rc) {
-		ir_input_nokey(ir->input, &ir->ir);
-	} else {
-		ir_input_keydown(ir->input, &ir->ir, ir_key);
-	}
+	if (rc)
+		ir_keydown(ir->input, ir_key, 0);
 }
 
 static void ir_work(struct work_struct *work)
@@ -439,10 +436,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 dev_name(&client->dev));
 
 	/* init + register input device */
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
-
+	ir->ir_type = ir_type;
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->name       = ir->name;
 	input_dev->phys       = ir->phys;
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index b59475bfc24..b588e30cbcf 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -267,13 +267,13 @@ int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		if (p.video_encoding != itv->params.video_encoding) {
 			int is_mpeg1 = p.video_encoding ==
 				V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-			struct v4l2_format fmt;
+			struct v4l2_mbus_framefmt fmt;
 
 			/* fix videodecoder resolution */
-			fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			fmt.fmt.pix.width = itv->params.width / (is_mpeg1 ? 2 : 1);
-			fmt.fmt.pix.height = itv->params.height;
-			v4l2_subdev_call(itv->sd_video, video, s_fmt, &fmt);
+			fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
+			fmt.height = itv->params.height;
+			fmt.code = V4L2_MBUS_FMT_FIXED;
+			v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
 		}
 		err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
 		if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 1b79475ca13..90daa6e751d 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -130,6 +130,9 @@ static int ivtv_yuv_threshold = -1;
 static int ivtv_pci_latency = 1;
 
 int ivtv_debug;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+int ivtv_fw_debug;
+#endif
 
 static int tunertype = -1;
 static int newi2c = -1;
@@ -141,6 +144,9 @@ module_param_string(pal, pal, sizeof(pal), 0644);
 module_param_string(secam, secam, sizeof(secam), 0644);
 module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
 module_param_named(debug,ivtv_debug, int, 0644);
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+module_param_named(fw_debug, ivtv_fw_debug, int, 0644);
+#endif
 module_param(ivtv_pci_latency, int, 0644);
 module_param(ivtv_yuv_mode, int, 0644);
 module_param(ivtv_yuv_threshold, int, 0644);
@@ -217,6 +223,10 @@ MODULE_PARM_DESC(debug,
 		 "\t\t\t 256/0x0100: yuv\n"
 		 "\t\t\t 512/0x0200: i2c\n"
 		 "\t\t\t1024/0x0400: high volume\n");
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+MODULE_PARM_DESC(fw_debug,
+		 "Enable code for debugging firmware problems.  Default: 0\n");
+#endif
 MODULE_PARM_DESC(ivtv_pci_latency,
 		 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
 		 "\t\t\tDefault: Yes");
@@ -1425,12 +1435,16 @@ EXPORT_SYMBOL(ivtv_vapi);
 EXPORT_SYMBOL(ivtv_vapi_result);
 EXPORT_SYMBOL(ivtv_clear_irq_mask);
 EXPORT_SYMBOL(ivtv_debug);
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+EXPORT_SYMBOL(ivtv_fw_debug);
+#endif
 EXPORT_SYMBOL(ivtv_reset_ir_gpio);
 EXPORT_SYMBOL(ivtv_udma_setup);
 EXPORT_SYMBOL(ivtv_udma_unmap);
 EXPORT_SYMBOL(ivtv_udma_alloc);
 EXPORT_SYMBOL(ivtv_udma_prepare);
 EXPORT_SYMBOL(ivtv_init_on_first_open);
+EXPORT_SYMBOL(ivtv_firmware_check);
 
 module_init(module_start);
 module_exit(module_cleanup);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 5b45fd2b264..bd084df4448 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -122,6 +122,9 @@
 
 /* debugging */
 extern int ivtv_debug;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+extern int ivtv_fw_debug;
+#endif
 
 #define IVTV_DBGFLG_WARN    (1 << 0)
 #define IVTV_DBGFLG_INFO    (1 << 1)
@@ -734,6 +737,7 @@ struct ivtv {
 	struct v4l2_rect osd_rect;      /* current OSD position and size */
 	struct v4l2_rect main_rect;     /* current Main window position and size */
 	struct osd_info *osd_info;      /* ivtvfb private OSD info */
+	void (*ivtvfb_restore)(struct ivtv *itv); /* Used for a warm start */
 };
 
 static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev)
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index abf410943cc..a6a2cdb8156 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -32,6 +32,7 @@
 #include "ivtv-yuv.h"
 #include "ivtv-ioctl.h"
 #include "ivtv-cards.h"
+#include "ivtv-firmware.h"
 #include <media/v4l2-event.h>
 #include <media/saa7115.h>
 
@@ -526,6 +527,7 @@ int ivtv_start_decoding(struct ivtv_open_id *id, int speed)
 {
 	struct ivtv *itv = id->itv;
 	struct ivtv_stream *s = &itv->streams[id->type];
+	int rc;
 
 	if (atomic_read(&itv->decoding) == 0) {
 		if (ivtv_claim_stream(id, s->type)) {
@@ -533,7 +535,13 @@ int ivtv_start_decoding(struct ivtv_open_id *id, int speed)
 			IVTV_DEBUG_WARN("start decode, stream already claimed\n");
 			return -EBUSY;
 		}
-		ivtv_start_v4l2_decode_stream(s, 0);
+		rc = ivtv_start_v4l2_decode_stream(s, 0);
+		if (rc < 0) {
+			if (rc == -EAGAIN)
+				rc = ivtv_start_v4l2_decode_stream(s, 0);
+			if (rc < 0)
+				return rc;
+		}
 	}
 	if (s->type == IVTV_DEC_STREAM_TYPE_MPG)
 		return ivtv_set_speed(itv, speed);
@@ -823,6 +831,12 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
 
 	IVTV_DEBUG_FILE("close() of %s\n", s->name);
 
+	if (id->type == IVTV_DEC_STREAM_TYPE_YUV &&
+		test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
+		/* Restore registers we've changed & clean up any mess */
+		ivtv_yuv_close(itv);
+	}
+
 	/* Stop decoding */
 	if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
 		IVTV_DEBUG_INFO("close stopping decode\n");
@@ -832,10 +846,7 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
 	}
 	clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
 	clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
-	if (id->type == IVTV_DEC_STREAM_TYPE_YUV && test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
-		/* Restore registers we've changed & clean up any mess we've made */
-		ivtv_yuv_close(itv);
-	}
+
 	if (itv->output_mode == OUT_UDMA_YUV && id->yuv_frames)
 		itv->output_mode = OUT_NONE;
 
@@ -909,12 +920,32 @@ int ivtv_v4l2_close(struct file *filp)
 
 static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp)
 {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	struct video_device *vdev = video_devdata(filp);
+#endif
 	struct ivtv *itv = s->itv;
 	struct ivtv_open_id *item;
 	int res = 0;
 
 	IVTV_DEBUG_FILE("open %s\n", s->name);
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	/* Unless ivtv_fw_debug is set, error out if firmware dead. */
+	if (ivtv_fw_debug) {
+		IVTV_WARN("Opening %s with dead firmware lockout disabled\n",
+			  video_device_node_name(vdev));
+		IVTV_WARN("Selected firmware errors will be ignored\n");
+	} else {
+#else
+	if (1) {
+#endif
+		res = ivtv_firmware_check(itv, "ivtv_serialized_open");
+		if (res == -EAGAIN)
+			res = ivtv_firmware_check(itv, "ivtv_serialized_open");
+		if (res < 0)
+			return -EIO;
+	}
+
 	if (s->type == IVTV_DEC_STREAM_TYPE_MPG &&
 		test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_YUV].s_flags))
 		return -EBUSY;
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index a71e8ba306b..d8bf2b01729 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -23,7 +23,10 @@
 #include "ivtv-mailbox.h"
 #include "ivtv-firmware.h"
 #include "ivtv-yuv.h"
+#include "ivtv-ioctl.h"
+#include "ivtv-cards.h"
 #include <linux/firmware.h>
+#include <media/saa7127.h>
 
 #define IVTV_MASK_SPU_ENABLE 		0xFFFFFFFE
 #define IVTV_MASK_VPU_ENABLE15 		0xFFFFFFF6
@@ -271,3 +274,122 @@ void ivtv_init_mpeg_decoder(struct ivtv *itv)
 	}
 	ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 4, 0, 0, 0, 1);
 }
+
+/* Try to restart the card & restore previous settings */
+int ivtv_firmware_restart(struct ivtv *itv)
+{
+	int rc = 0;
+	v4l2_std_id std;
+	struct ivtv_open_id fh;
+	fh.itv = itv;
+
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
+		/* Display test image during restart */
+		ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing,
+		    SAA7127_INPUT_TYPE_TEST_IMAGE,
+		    itv->card->video_outputs[itv->active_output].video_output,
+		    0);
+
+	mutex_lock(&itv->udma.lock);
+
+	rc = ivtv_firmware_init(itv);
+	if (rc) {
+		mutex_unlock(&itv->udma.lock);
+		return rc;
+	}
+
+	/* Allow settings to reload */
+	ivtv_mailbox_cache_invalidate(itv);
+
+	/* Restore video standard */
+	std = itv->std;
+	itv->std = 0;
+	ivtv_s_std(NULL, &fh, &std);
+
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
+		ivtv_init_mpeg_decoder(itv);
+
+		/* Restore framebuffer if active */
+		if (itv->ivtvfb_restore)
+			itv->ivtvfb_restore(itv);
+
+		/* Restore alpha settings */
+		ivtv_set_osd_alpha(itv);
+
+		/* Restore normal output */
+		ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing,
+		    SAA7127_INPUT_TYPE_NORMAL,
+		    itv->card->video_outputs[itv->active_output].video_output,
+		    0);
+	}
+
+	mutex_unlock(&itv->udma.lock);
+	return rc;
+}
+
+/* Check firmware running state. The checks fall through
+   allowing multiple failures to be logged. */
+int ivtv_firmware_check(struct ivtv *itv, char *where)
+{
+	int res = 0;
+
+	/* Check encoder is still running */
+	if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0) < 0) {
+		IVTV_WARN("Encoder has died : %s\n", where);
+		res = -1;
+	}
+
+	/* Also check audio. Only check if not in use & encoder is okay */
+	if (!res && !atomic_read(&itv->capturing) &&
+	    (!atomic_read(&itv->decoding) ||
+	     (atomic_read(&itv->decoding) < 2 && test_bit(IVTV_F_I_DEC_YUV,
+							     &itv->i_flags)))) {
+
+		if (ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12) < 0) {
+			IVTV_WARN("Audio has died (Encoder OK) : %s\n", where);
+			res = -2;
+		}
+	}
+
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
+		/* Second audio check. Skip if audio already failed */
+		if (res != -2 && read_dec(0x100) != read_dec(0x104)) {
+			/* Wait & try again to be certain. */
+			ivtv_msleep_timeout(14, 0);
+			if (read_dec(0x100) != read_dec(0x104)) {
+				IVTV_WARN("Audio has died (Decoder) : %s\n",
+					  where);
+				res = -1;
+			}
+		}
+
+		/* Check decoder is still running */
+		if (ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0) < 0) {
+			IVTV_WARN("Decoder has died : %s\n", where);
+			res = -1;
+		}
+	}
+
+	/* If something failed & currently idle, try to reload */
+	if (res && !atomic_read(&itv->capturing) &&
+						!atomic_read(&itv->decoding)) {
+		IVTV_INFO("Detected in %s that firmware had failed - "
+			  "Reloading\n", where);
+		res = ivtv_firmware_restart(itv);
+		/*
+		 * Even if restarted ok, still signal a problem had occured.
+		 * The caller can come through this function again to check
+		 * if things are really ok after the restart.
+		 */
+		if (!res) {
+			IVTV_INFO("Firmware restart okay\n");
+			res = -EAGAIN;
+		} else {
+			IVTV_INFO("Firmware restart failed\n");
+		}
+	} else if (res) {
+		res = -EIO;
+	}
+
+	return res;
+}
diff --git a/drivers/media/video/ivtv/ivtv-firmware.h b/drivers/media/video/ivtv/ivtv-firmware.h
index 041ba94e65b..52bb4e5598f 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.h
+++ b/drivers/media/video/ivtv/ivtv-firmware.h
@@ -26,5 +26,6 @@ int ivtv_firmware_init(struct ivtv *itv);
 void ivtv_firmware_versions(struct ivtv *itv);
 void ivtv_halt_firmware(struct ivtv *itv);
 void ivtv_init_mpeg_decoder(struct ivtv *itv);
+int ivtv_firmware_check(struct ivtv *itv, char *where);
 
 #endif
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index fa9f0d958f9..11ac2fa33ef 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -569,6 +569,7 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
 	struct ivtv_open_id *id = fh;
 	struct ivtv *itv = id->itv;
 	struct cx2341x_mpeg_params *p = &itv->params;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
 	int w = fmt->fmt.pix.width;
 	int h = fmt->fmt.pix.height;
@@ -586,7 +587,10 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
 	p->height = h;
 	if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
 		fmt->fmt.pix.width /= 2;
-	v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+	mbus_fmt.width = fmt->fmt.pix.width;
+	mbus_fmt.height = h;
+	mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+	v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &mbus_fmt);
 	return ivtv_g_fmt_vid_cap(file, fh, fmt);
 }
 
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c
index 84577f6f41a..e3ce9676378 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.c
+++ b/drivers/media/video/ivtv/ivtv-mailbox.c
@@ -377,3 +377,11 @@ void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb,
 	for (i = 0; i < argc; i++, p++)
 		data[i] = readl(p);
 }
+
+/* Wipe api cache */
+void ivtv_mailbox_cache_invalidate(struct ivtv *itv)
+{
+	int i;
+	for (i = 0; i < 256; i++)
+		itv->api_cache[i].last_jiffies = 0;
+}
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/video/ivtv/ivtv-mailbox.h
index 8247662c928..2c834d2cb56 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.h
+++ b/drivers/media/video/ivtv/ivtv-mailbox.h
@@ -30,5 +30,6 @@ int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]);
 int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...);
 int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...);
 int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]);
+void ivtv_mailbox_cache_invalidate(struct ivtv *itv);
 
 #endif
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index de4288cc188..55df4190c28 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -42,6 +42,7 @@
 #include "ivtv-yuv.h"
 #include "ivtv-cards.h"
 #include "ivtv-streams.h"
+#include "ivtv-firmware.h"
 #include <media/v4l2-event.h>
 
 static const struct v4l2_file_operations ivtv_v4l2_enc_fops = {
@@ -618,12 +619,17 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 	struct ivtv *itv = s->itv;
 	struct cx2341x_mpeg_params *p = &itv->params;
 	int datatype;
+	u16 width;
+	u16 height;
 
 	if (s->vdev == NULL)
 		return -EINVAL;
 
 	IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
 
+	width = p->width;
+	height = p->height;
+
 	/* set audio mode to left/stereo  for dual/stereo mode. */
 	ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
 
@@ -646,7 +652,14 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 	   2 = yuv_from_host */
 	switch (s->type) {
 	case IVTV_DEC_STREAM_TYPE_YUV:
-		datatype = itv->output_mode == OUT_PASSTHROUGH ? 1 : 2;
+		if (itv->output_mode == OUT_PASSTHROUGH) {
+			datatype = 1;
+		} else {
+			/* Fake size to avoid switching video standard */
+			datatype = 2;
+			width = 720;
+			height = itv->is_out_50hz ? 576 : 480;
+		}
 		IVTV_DEBUG_INFO("Setup DEC YUV Stream data[0] = %d\n", datatype);
 		break;
 	case IVTV_DEC_STREAM_TYPE_MPG:
@@ -655,15 +668,21 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 		break;
 	}
 	if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
-			p->width, p->height, p->audio_properties)) {
+			width, height, p->audio_properties)) {
 		IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
 	}
-	return 0;
+
+	/* Decoder sometimes dies here, so wait a moment */
+	ivtv_msleep_timeout(10, 0);
+
+	/* Known failure point for firmware, so check */
+	return ivtv_firmware_check(itv, "ivtv_setup_v4l2_decode_stream");
 }
 
 int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset)
 {
 	struct ivtv *itv = s->itv;
+	int rc;
 
 	if (s->vdev == NULL)
 		return -EINVAL;
@@ -673,7 +692,11 @@ int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset)
 
 	IVTV_DEBUG_INFO("Starting decode stream %s (gop_offset %d)\n", s->name, gop_offset);
 
-	ivtv_setup_v4l2_decode_stream(s);
+	rc = ivtv_setup_v4l2_decode_stream(s);
+	if (rc < 0) {
+		clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
+		return rc;
+	}
 
 	/* set dma size to 65536 bytes */
 	ivtv_vapi(itv, CX2341X_DEC_SET_DMA_BLOCK_SIZE, 1, 65536);
@@ -697,6 +720,9 @@ int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset)
 	/* start playback */
 	ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, gop_offset, 0);
 
+	/* Let things settle before we actually start */
+	ivtv_msleep_timeout(10, 0);
+
 	/* Clear the following Interrupt mask bits for decoding */
 	ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_DECODE);
 	IVTV_DEBUG_IRQ("IRQ Mask is now: 0x%08x\n", itv->irqmask);
@@ -893,6 +919,9 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts)
 	clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
 	ivtv_flush_queues(s);
 
+	/* decoder needs time to settle */
+	ivtv_msleep_timeout(40, 0);
+
 	/* decrement decoding */
 	atomic_dec(&itv->decoding);
 
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index b530dec399d..b67a4048f5a 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -23,7 +23,7 @@
 #define IVTV_DRIVER_NAME "ivtv"
 #define IVTV_DRIVER_VERSION_MAJOR 1
 #define IVTV_DRIVER_VERSION_MINOR 4
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 1
+#define IVTV_DRIVER_VERSION_PATCHLEVEL 2
 
 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
 #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 49e1a283ed3..be03a712731 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -53,6 +53,7 @@
 #include "ivtv-i2c.h"
 #include "ivtv-udma.h"
 #include "ivtv-mailbox.h"
+#include "ivtv-firmware.h"
 
 /* card parameters */
 static int ivtvfb_card_id = -1;
@@ -178,6 +179,12 @@ struct osd_info {
 	struct fb_info ivtvfb_info;
 	struct fb_var_screeninfo ivtvfb_defined;
 	struct fb_fix_screeninfo ivtvfb_fix;
+
+	/* Used for a warm start */
+	struct fb_var_screeninfo fbvar_cur;
+	int blank_cur;
+	u32 palette_cur[256];
+	u32 pan_cur;
 };
 
 struct ivtv_osd_coords {
@@ -199,6 +206,7 @@ static int ivtvfb_get_framebuffer(struct ivtv *itv, u32 *fbbase,
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	int rc;
 
+	ivtv_firmware_check(itv, "ivtvfb_get_framebuffer");
 	rc = ivtv_vapi_result(itv, data, CX2341X_OSD_GET_FRAMEBUFFER, 0);
 	*fbbase = data[0];
 	*fblength = data[1];
@@ -581,8 +589,10 @@ static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var)
 	ivtv_window.height = var->yres;
 
 	/* Minimum margin cannot be 0, as X won't allow such a mode */
-	if (!var->upper_margin) var->upper_margin++;
-	if (!var->left_margin) var->left_margin++;
+	if (!var->upper_margin)
+		var->upper_margin++;
+	if (!var->left_margin)
+		var->left_margin++;
 	ivtv_window.top = var->upper_margin - 1;
 	ivtv_window.left = var->left_margin - 1;
 
@@ -595,6 +605,9 @@ static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var)
 	/* Force update of yuv registers */
 	itv->yuv_info.yuv_forced_update = 1;
 
+	/* Keep a copy of these settings */
+	memcpy(&oi->fbvar_cur, var, sizeof(oi->fbvar_cur));
+
 	IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n",
 		      var->xres, var->yres,
 		      var->xres_virtual, var->yres_virtual,
@@ -829,6 +842,8 @@ static int ivtvfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *inf
 	itv->yuv_info.osd_y_pan = var->yoffset;
 	/* Force update of yuv registers */
 	itv->yuv_info.yuv_forced_update = 1;
+	/* Remember this value */
+	itv->osd_info->pan_cur = osd_pan_index;
 	return 0;
 }
 
@@ -842,6 +857,7 @@ static int ivtvfb_set_par(struct fb_info *info)
 	rc = ivtvfb_set_var(itv, &info->var);
 	ivtvfb_pan_display(&info->var, info);
 	ivtvfb_get_fix(itv, &info->fix);
+	ivtv_firmware_check(itv, "ivtvfb_set_par");
 	return rc;
 }
 
@@ -859,6 +875,7 @@ static int ivtvfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	if (info->var.bits_per_pixel <= 8) {
 		write_reg(regno, 0x02a30);
 		write_reg(color, 0x02a34);
+		itv->osd_info->palette_cur[regno] = color;
 		return 0;
 	}
 	if (regno >= 16)
@@ -911,6 +928,7 @@ static int ivtvfb_blank(int blank_mode, struct fb_info *info)
 		ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
 		break;
 	}
+	itv->osd_info->blank_cur = blank_mode;
 	return 0;
 }
 
@@ -929,6 +947,21 @@ static struct fb_ops ivtvfb_ops = {
 	.fb_blank       = ivtvfb_blank,
 };
 
+/* Restore hardware after firmware restart */
+static void ivtvfb_restore(struct ivtv *itv)
+{
+	struct osd_info *oi = itv->osd_info;
+	int i;
+
+	ivtvfb_set_var(itv, &oi->fbvar_cur);
+	ivtvfb_blank(oi->blank_cur, &oi->ivtvfb_info);
+	for (i = 0; i < 256; i++) {
+		write_reg(i, 0x02a30);
+		write_reg(oi->palette_cur[i], 0x02a34);
+	}
+	write_reg(oi->pan_cur, 0x02a0c);
+}
+
 /* Initialization */
 
 
@@ -1066,7 +1099,11 @@ static int ivtvfb_init_io(struct ivtv *itv)
 	}
 	mutex_unlock(&itv->serialize_lock);
 
-	ivtvfb_get_framebuffer(itv, &oi->video_rbase, &oi->video_buffer_size);
+	if (ivtvfb_get_framebuffer(itv, &oi->video_rbase,
+					&oi->video_buffer_size) < 0) {
+		IVTVFB_ERR("Firmware failed to respond\n");
+		return -EIO;
+	}
 
 	/* The osd buffer size depends on the number of video buffers allocated
 	   on the PVR350 itself. For now we'll hardcode the smallest osd buffer
@@ -1158,8 +1195,11 @@ static int ivtvfb_init_card(struct ivtv *itv)
 	}
 
 	/* Find & setup the OSD buffer */
-	if ((rc = ivtvfb_init_io(itv)))
+	rc = ivtvfb_init_io(itv);
+	if (rc) {
+		ivtvfb_release_buffers(itv);
 		return rc;
+	}
 
 	/* Set the startup video mode information */
 	if ((rc = ivtvfb_init_vidmode(itv))) {
@@ -1185,6 +1225,9 @@ static int ivtvfb_init_card(struct ivtv *itv)
 	/* Enable the osd */
 	ivtvfb_blank(FB_BLANK_UNBLANK, &itv->osd_info->ivtvfb_info);
 
+	/* Enable restart */
+	itv->ivtvfb_restore = ivtvfb_restore;
+
 	/* Allocate DMA */
 	ivtv_udma_alloc(itv);
 	return 0;
@@ -1196,7 +1239,7 @@ static int __init ivtvfb_callback_init(struct device *dev, void *p)
 	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
 	struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
 
-	if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) {
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
 		if (ivtvfb_init_card(itv) == 0) {
 			IVTVFB_INFO("Framebuffer registered on %s\n",
 					itv->v4l2_dev.name);
@@ -1210,15 +1253,17 @@ static int ivtvfb_callback_cleanup(struct device *dev, void *p)
 {
 	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
 	struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
+	struct osd_info *oi = itv->osd_info;
 
-	if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) {
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
 		if (unregister_framebuffer(&itv->osd_info->ivtvfb_info)) {
 			IVTVFB_WARN("Framebuffer %d is in use, cannot unload\n",
 				       itv->instance);
 			return 0;
 		}
 		IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance);
-		ivtvfb_blank(FB_BLANK_POWERDOWN, &itv->osd_info->ivtvfb_info);
+		itv->ivtvfb_restore = NULL;
+		ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info);
 		ivtvfb_release_buffers(itv);
 		itv->osd_video_pbase = 0;
 	}
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 554eaf14012..4525335f9bd 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -903,14 +903,14 @@ static int m2mtest_release(struct file *file)
 static unsigned int m2mtest_poll(struct file *file,
 				 struct poll_table_struct *wait)
 {
-	struct m2mtest_ctx *ctx = (struct m2mtest_ctx *)file->private_data;
+	struct m2mtest_ctx *ctx = file->private_data;
 
 	return v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
 }
 
 static int m2mtest_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	struct m2mtest_ctx *ctx = (struct m2mtest_ctx *)file->private_data;
+	struct m2mtest_ctx *ctx = file->private_data;
 
 	return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
 }
@@ -988,6 +988,9 @@ static int m2mtest_probe(struct platform_device *pdev)
 		goto err_m2m;
 	}
 
+	q_data[V4L2_M2M_SRC].fmt = &formats[0];
+	q_data[V4L2_M2M_DST].fmt = &formats[0];
+
 	return 0;
 
 err_m2m:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index b62c0bd3f8e..79f096ddcf5 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -701,13 +701,13 @@ static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
 #endif
 };
 
-static int mt9m001_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	struct i2c_client *client = sd->priv;
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
 
-	if ((unsigned int)index >= mt9m001->num_fmts)
+	if (index >= mt9m001->num_fmts)
 		return -EINVAL;
 
 	*code = mt9m001->fmts[index].code;
@@ -785,7 +785,6 @@ static int mt9m001_probe(struct i2c_client *client,
 	ret = mt9m001_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(mt9m001);
 	}
 
@@ -799,7 +798,6 @@ static int mt9m001_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9m001_video_remove(icd);
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(mt9m001);
 
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index d35f536f9fc..31cc3d04bcc 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -143,10 +143,10 @@ static const struct mt9m111_datafmt *mt9m111_find_datafmt(
 }
 
 static const struct mt9m111_datafmt mt9m111_colour_fmts[] = {
-	{V4L2_MBUS_FMT_YUYV8_2X8_LE, V4L2_COLORSPACE_JPEG},
-	{V4L2_MBUS_FMT_YVYU8_2X8_LE, V4L2_COLORSPACE_JPEG},
-	{V4L2_MBUS_FMT_YUYV8_2X8_BE, V4L2_COLORSPACE_JPEG},
-	{V4L2_MBUS_FMT_YVYU8_2X8_BE, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
@@ -505,22 +505,22 @@ static int mt9m111_set_pixfmt(struct i2c_client *client,
 	case V4L2_MBUS_FMT_RGB565_2X8_LE:
 		ret = mt9m111_setfmt_rgb565(client);
 		break;
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
 		mt9m111->swap_yuv_y_chromas = 0;
 		mt9m111->swap_yuv_cb_cr = 0;
 		ret = mt9m111_setfmt_yuv(client);
 		break;
-	case V4L2_MBUS_FMT_YVYU8_2X8_BE:
+	case V4L2_MBUS_FMT_VYUY8_2X8:
 		mt9m111->swap_yuv_y_chromas = 0;
 		mt9m111->swap_yuv_cb_cr = 1;
 		ret = mt9m111_setfmt_yuv(client);
 		break;
-	case V4L2_MBUS_FMT_YUYV8_2X8_LE:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
 		mt9m111->swap_yuv_y_chromas = 1;
 		mt9m111->swap_yuv_cb_cr = 0;
 		ret = mt9m111_setfmt_yuv(client);
 		break;
-	case V4L2_MBUS_FMT_YVYU8_2X8_LE:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
 		mt9m111->swap_yuv_y_chromas = 1;
 		mt9m111->swap_yuv_cb_cr = 1;
 		ret = mt9m111_setfmt_yuv(client);
@@ -999,10 +999,10 @@ static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 #endif
 };
 
-static int mt9m111_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m111_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(mt9m111_colour_fmts))
+	if (index >= ARRAY_SIZE(mt9m111_colour_fmts))
 		return -EINVAL;
 
 	*code = mt9m111_colour_fmts[index].code;
@@ -1068,7 +1068,6 @@ static int mt9m111_probe(struct i2c_client *client,
 	ret = mt9m111_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(mt9m111);
 	}
 
@@ -1081,7 +1080,6 @@ static int mt9m111_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(mt9m111);
 
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 78b4e091d2d..a9a28b21423 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -798,7 +798,7 @@ static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
 #endif
 };
 
-static int mt9t031_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
@@ -883,7 +883,6 @@ static int mt9t031_probe(struct i2c_client *client,
 	if (ret) {
 		if (icd)
 			icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(mt9t031);
 	}
 
@@ -897,7 +896,6 @@ static int mt9t031_remove(struct i2c_client *client)
 
 	if (icd)
 		icd->ops = NULL;
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(mt9t031);
 
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index 7438f8d775b..8ec47e42d4d 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -121,22 +121,22 @@ struct mt9t112_priv {
 
 static const struct mt9t112_format mt9t112_cfmts[] = {
 	{
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_BE,
+		.code		= V4L2_MBUS_FMT_UYVY8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.fmt		= 1,
 		.order		= 0,
 	}, {
-		.code		= V4L2_MBUS_FMT_YVYU8_2X8_BE,
+		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.fmt		= 1,
 		.order		= 1,
 	}, {
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_LE,
+		.code		= V4L2_MBUS_FMT_YUYV8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.fmt		= 1,
 		.order		= 2,
 	}, {
-		.code		= V4L2_MBUS_FMT_YVYU8_2X8_LE,
+		.code		= V4L2_MBUS_FMT_YVYU8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.fmt		= 1,
 		.order		= 3,
@@ -972,7 +972,7 @@ static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	struct v4l2_rect *rect = &a->c;
 
 	return mt9t112_set_params(client, rect->width, rect->height,
-				 V4L2_MBUS_FMT_YUYV8_2X8_BE);
+				 V4L2_MBUS_FMT_UYVY8_2X8);
 }
 
 static int mt9t112_g_fmt(struct v4l2_subdev *sd,
@@ -983,7 +983,7 @@ static int mt9t112_g_fmt(struct v4l2_subdev *sd,
 
 	if (!priv->format) {
 		int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
-					     V4L2_MBUS_FMT_YUYV8_2X8_BE);
+					     V4L2_MBUS_FMT_UYVY8_2X8);
 		if (ret < 0)
 			return ret;
 	}
@@ -1017,10 +1017,10 @@ static int mt9t112_try_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t112_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
+	if (index >= ARRAY_SIZE(mt9t112_cfmts))
 		return -EINVAL;
 
 	*code = mt9t112_cfmts[index].code;
@@ -1119,7 +1119,6 @@ static int mt9t112_probe(struct i2c_client *client,
 	ret = mt9t112_camera_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -1132,7 +1131,6 @@ static int mt9t112_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 72e55be0b4a..f5e778d5ca9 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -392,27 +392,25 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return 0;
 }
 
-static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
+					enum v4l2_mbus_pixelcode *code)
 {
-	if (fmt->index > 0)
+	if (index > 0)
 		return -EINVAL;
 
-	fmt->flags = 0;
-	strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
-	fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
-
+	*code = V4L2_MBUS_FMT_SGRBG8_1X8;
 	return 0;
 }
 
-static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-
-	if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+	if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8)
 		return -EINVAL;
 
-	v4l_bound_align_image(&pix->width, 48, 639, 1,
-			      &pix->height, 32, 480, 1, 0);
+	v4l_bound_align_image(&fmt->width, 48, 639, 1,
+			      &fmt->height, 32, 480, 1, 0);
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
 
 	return 0;
 }
@@ -455,18 +453,17 @@ static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
 	return 0;
 }
 
-static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
 	struct mt9v011 *core = to_mt9v011(sd);
 	int rc;
 
-	rc = mt9v011_try_fmt(sd, fmt);
+	rc = mt9v011_try_mbus_fmt(sd, fmt);
 	if (rc < 0)
 		return -EINVAL;
 
-	core->width = pix->width;
-	core->height = pix->height;
+	core->width = fmt->width;
+	core->height = fmt->height;
 
 	set_res(sd);
 
@@ -549,9 +546,9 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
 };
 
 static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
-	.enum_fmt = mt9v011_enum_fmt,
-	.try_fmt = mt9v011_try_fmt,
-	.s_fmt = mt9v011_s_fmt,
+	.enum_mbus_fmt = mt9v011_enum_mbus_fmt,
+	.try_mbus_fmt = mt9v011_try_mbus_fmt,
+	.s_mbus_fmt = mt9v011_s_mbus_fmt,
 	.g_parm = mt9v011_g_parm,
 	.s_parm = mt9v011_s_parm,
 };
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index e5bae4c9393..e7cd23cd639 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -838,13 +838,13 @@ static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
 #endif
 };
 
-static int mt9v022_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	struct i2c_client *client = sd->priv;
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
 
-	if ((unsigned int)index >= mt9v022->num_fmts)
+	if (index >= mt9v022->num_fmts)
 		return -EINVAL;
 
 	*code = mt9v022->fmts[index].code;
@@ -920,7 +920,6 @@ static int mt9v022_probe(struct i2c_client *client,
 	ret = mt9v022_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(mt9v022);
 	}
 
@@ -934,7 +933,6 @@ static int mt9v022_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9v022_video_remove(icd);
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(mt9v022);
 
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
new file mode 100644
index 00000000000..026bef0ba40
--- /dev/null
+++ b/drivers/media/video/mx2_camera.c
@@ -0,0 +1,1513 @@
+/*
+ * V4L2 Driver for i.MX27/i.MX25 camera host
+ *
+ * Copyright (C) 2008, Sascha Hauer, Pengutronix
+ * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+
+#include <linux/videodev2.h>
+
+#include <mach/mx2_cam.h>
+#ifdef CONFIG_MACH_MX27
+#include <mach/dma-mx1-mx2.h>
+#endif
+#include <mach/hardware.h>
+
+#include <asm/dma.h>
+
+#define MX2_CAM_DRV_NAME "mx2-camera"
+#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
+
+/* reset values */
+#define CSICR1_RESET_VAL	0x40000800
+#define CSICR2_RESET_VAL	0x0
+#define CSICR3_RESET_VAL	0x0
+
+/* csi control reg 1 */
+#define CSICR1_SWAP16_EN	(1 << 31)
+#define CSICR1_EXT_VSYNC	(1 << 30)
+#define CSICR1_EOF_INTEN	(1 << 29)
+#define CSICR1_PRP_IF_EN	(1 << 28)
+#define CSICR1_CCIR_MODE	(1 << 27)
+#define CSICR1_COF_INTEN	(1 << 26)
+#define CSICR1_SF_OR_INTEN	(1 << 25)
+#define CSICR1_RF_OR_INTEN	(1 << 24)
+#define CSICR1_STATFF_LEVEL	(3 << 22)
+#define CSICR1_STATFF_INTEN	(1 << 21)
+#define CSICR1_RXFF_LEVEL(l)	(((l) & 3) << 19)	/* MX27 */
+#define CSICR1_FB2_DMA_INTEN	(1 << 20)		/* MX25 */
+#define CSICR1_FB1_DMA_INTEN	(1 << 19)		/* MX25 */
+#define CSICR1_RXFF_INTEN	(1 << 18)
+#define CSICR1_SOF_POL		(1 << 17)
+#define CSICR1_SOF_INTEN	(1 << 16)
+#define CSICR1_MCLKDIV(d)	(((d) & 0xF) << 12)
+#define CSICR1_HSYNC_POL	(1 << 11)
+#define CSICR1_CCIR_EN		(1 << 10)
+#define CSICR1_MCLKEN		(1 << 9)
+#define CSICR1_FCC		(1 << 8)
+#define CSICR1_PACK_DIR		(1 << 7)
+#define CSICR1_CLR_STATFIFO	(1 << 6)
+#define CSICR1_CLR_RXFIFO	(1 << 5)
+#define CSICR1_GCLK_MODE	(1 << 4)
+#define CSICR1_INV_DATA		(1 << 3)
+#define CSICR1_INV_PCLK		(1 << 2)
+#define CSICR1_REDGE		(1 << 1)
+
+#define SHIFT_STATFF_LEVEL	22
+#define SHIFT_RXFF_LEVEL	19
+#define SHIFT_MCLKDIV		12
+
+/* control reg 3 */
+#define CSICR3_FRMCNT		(0xFFFF << 16)
+#define CSICR3_FRMCNT_RST	(1 << 15)
+#define CSICR3_DMA_REFLASH_RFF	(1 << 14)
+#define CSICR3_DMA_REFLASH_SFF	(1 << 13)
+#define CSICR3_DMA_REQ_EN_RFF	(1 << 12)
+#define CSICR3_DMA_REQ_EN_SFF	(1 << 11)
+#define CSICR3_RXFF_LEVEL(l)	(((l) & 7) << 4)	/* MX25 */
+#define CSICR3_CSI_SUP		(1 << 3)
+#define CSICR3_ZERO_PACK_EN	(1 << 2)
+#define CSICR3_ECC_INT_EN	(1 << 1)
+#define CSICR3_ECC_AUTO_EN	(1 << 0)
+
+#define SHIFT_FRMCNT		16
+
+/* csi status reg */
+#define CSISR_SFF_OR_INT	(1 << 25)
+#define CSISR_RFF_OR_INT	(1 << 24)
+#define CSISR_STATFF_INT	(1 << 21)
+#define CSISR_DMA_TSF_FB2_INT	(1 << 20)	/* MX25 */
+#define CSISR_DMA_TSF_FB1_INT	(1 << 19)	/* MX25 */
+#define CSISR_RXFF_INT		(1 << 18)
+#define CSISR_EOF_INT		(1 << 17)
+#define CSISR_SOF_INT		(1 << 16)
+#define CSISR_F2_INT		(1 << 15)
+#define CSISR_F1_INT		(1 << 14)
+#define CSISR_COF_INT		(1 << 13)
+#define CSISR_ECC_INT		(1 << 1)
+#define CSISR_DRDY		(1 << 0)
+
+#define CSICR1			0x00
+#define CSICR2			0x04
+#define CSISR			(cpu_is_mx27() ? 0x08 : 0x18)
+#define CSISTATFIFO		0x0c
+#define CSIRFIFO		0x10
+#define CSIRXCNT		0x14
+#define CSICR3			(cpu_is_mx27() ? 0x1C : 0x08)
+#define CSIDMASA_STATFIFO	0x20
+#define CSIDMATA_STATFIFO	0x24
+#define CSIDMASA_FB1		0x28
+#define CSIDMASA_FB2		0x2c
+#define CSIFBUF_PARA		0x30
+#define CSIIMAG_PARA		0x34
+
+/* EMMA PrP */
+#define PRP_CNTL			0x00
+#define PRP_INTR_CNTL			0x04
+#define PRP_INTRSTATUS			0x08
+#define PRP_SOURCE_Y_PTR		0x0c
+#define PRP_SOURCE_CB_PTR		0x10
+#define PRP_SOURCE_CR_PTR		0x14
+#define PRP_DEST_RGB1_PTR		0x18
+#define PRP_DEST_RGB2_PTR		0x1c
+#define PRP_DEST_Y_PTR			0x20
+#define PRP_DEST_CB_PTR			0x24
+#define PRP_DEST_CR_PTR			0x28
+#define PRP_SRC_FRAME_SIZE		0x2c
+#define PRP_DEST_CH1_LINE_STRIDE	0x30
+#define PRP_SRC_PIXEL_FORMAT_CNTL	0x34
+#define PRP_CH1_PIXEL_FORMAT_CNTL	0x38
+#define PRP_CH1_OUT_IMAGE_SIZE		0x3c
+#define PRP_CH2_OUT_IMAGE_SIZE		0x40
+#define PRP_SRC_LINE_STRIDE		0x44
+#define PRP_CSC_COEF_012		0x48
+#define PRP_CSC_COEF_345		0x4c
+#define PRP_CSC_COEF_678		0x50
+#define PRP_CH1_RZ_HORI_COEF1		0x54
+#define PRP_CH1_RZ_HORI_COEF2		0x58
+#define PRP_CH1_RZ_HORI_VALID		0x5c
+#define PRP_CH1_RZ_VERT_COEF1		0x60
+#define PRP_CH1_RZ_VERT_COEF2		0x64
+#define PRP_CH1_RZ_VERT_VALID		0x68
+#define PRP_CH2_RZ_HORI_COEF1		0x6c
+#define PRP_CH2_RZ_HORI_COEF2		0x70
+#define PRP_CH2_RZ_HORI_VALID		0x74
+#define PRP_CH2_RZ_VERT_COEF1		0x78
+#define PRP_CH2_RZ_VERT_COEF2		0x7c
+#define PRP_CH2_RZ_VERT_VALID		0x80
+
+#define PRP_CNTL_CH1EN		(1 << 0)
+#define PRP_CNTL_CH2EN		(1 << 1)
+#define PRP_CNTL_CSIEN		(1 << 2)
+#define PRP_CNTL_DATA_IN_YUV420	(0 << 3)
+#define PRP_CNTL_DATA_IN_YUV422	(1 << 3)
+#define PRP_CNTL_DATA_IN_RGB16	(2 << 3)
+#define PRP_CNTL_DATA_IN_RGB32	(3 << 3)
+#define PRP_CNTL_CH1_OUT_RGB8	(0 << 5)
+#define PRP_CNTL_CH1_OUT_RGB16	(1 << 5)
+#define PRP_CNTL_CH1_OUT_RGB32	(2 << 5)
+#define PRP_CNTL_CH1_OUT_YUV422	(3 << 5)
+#define PRP_CNTL_CH2_OUT_YUV420	(0 << 7)
+#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
+#define PRP_CNTL_CH2_OUT_YUV444	(2 << 7)
+#define PRP_CNTL_CH1_LEN	(1 << 9)
+#define PRP_CNTL_CH2_LEN	(1 << 10)
+#define PRP_CNTL_SKIP_FRAME	(1 << 11)
+#define PRP_CNTL_SWRST		(1 << 12)
+#define PRP_CNTL_CLKEN		(1 << 13)
+#define PRP_CNTL_WEN		(1 << 14)
+#define PRP_CNTL_CH1BYP		(1 << 15)
+#define PRP_CNTL_IN_TSKIP(x)	((x) << 16)
+#define PRP_CNTL_CH1_TSKIP(x)	((x) << 19)
+#define PRP_CNTL_CH2_TSKIP(x)	((x) << 22)
+#define PRP_CNTL_INPUT_FIFO_LEVEL(x)	((x) << 25)
+#define PRP_CNTL_RZ_FIFO_LEVEL(x)	((x) << 27)
+#define PRP_CNTL_CH2B1EN	(1 << 29)
+#define PRP_CNTL_CH2B2EN	(1 << 30)
+#define PRP_CNTL_CH2FEN		(1 << 31)
+
+/* IRQ Enable and status register */
+#define PRP_INTR_RDERR		(1 << 0)
+#define PRP_INTR_CH1WERR	(1 << 1)
+#define PRP_INTR_CH2WERR	(1 << 2)
+#define PRP_INTR_CH1FC		(1 << 3)
+#define PRP_INTR_CH2FC		(1 << 5)
+#define PRP_INTR_LBOVF		(1 << 7)
+#define PRP_INTR_CH2OVF		(1 << 8)
+
+#define mx27_camera_emma(pcdev)	(cpu_is_mx27() && pcdev->use_emma)
+
+#define MAX_VIDEO_MEM	16
+
+struct mx2_camera_dev {
+	struct device		*dev;
+	struct soc_camera_host	soc_host;
+	struct soc_camera_device *icd;
+	struct clk		*clk_csi, *clk_emma;
+
+	unsigned int		irq_csi, irq_emma;
+	void __iomem		*base_csi, *base_emma;
+	unsigned long		base_dma;
+
+	struct mx2_camera_platform_data *pdata;
+	struct resource		*res_csi, *res_emma;
+	unsigned long		platform_flags;
+
+	struct list_head	capture;
+	struct list_head	active_bufs;
+
+	spinlock_t		lock;
+
+	int			dma;
+	struct mx2_buffer	*active;
+	struct mx2_buffer	*fb1_active;
+	struct mx2_buffer	*fb2_active;
+
+	int			use_emma;
+
+	u32			csicr1;
+
+	void			*discard_buffer;
+	dma_addr_t		discard_buffer_dma;
+	size_t			discard_size;
+};
+
+/* buffer for one video frame */
+struct mx2_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer		vb;
+
+	enum v4l2_mbus_pixelcode	code;
+
+	int bufnum;
+};
+
+static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
+{
+	unsigned long flags;
+
+	clk_disable(pcdev->clk_csi);
+	writel(0, pcdev->base_csi + CSICR1);
+	if (mx27_camera_emma(pcdev)) {
+		writel(0, pcdev->base_emma + PRP_CNTL);
+	} else if (cpu_is_mx25()) {
+		spin_lock_irqsave(&pcdev->lock, flags);
+		pcdev->fb1_active = NULL;
+		pcdev->fb2_active = NULL;
+		writel(0, pcdev->base_csi + CSIDMASA_FB1);
+		writel(0, pcdev->base_csi + CSIDMASA_FB2);
+		spin_unlock_irqrestore(&pcdev->lock, flags);
+	}
+}
+
+/*
+ * The following two functions absolutely depend on the fact, that
+ * there can be only one camera on mx2 camera sensor interface
+ */
+static int mx2_camera_add_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	int ret;
+	u32 csicr1;
+
+	if (pcdev->icd)
+		return -EBUSY;
+
+	ret = clk_enable(pcdev->clk_csi);
+	if (ret < 0)
+		return ret;
+
+	csicr1 = CSICR1_MCLKEN;
+
+	if (mx27_camera_emma(pcdev)) {
+		csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
+			CSICR1_RXFF_LEVEL(0);
+	} else if (cpu_is_mx27())
+		csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2);
+
+	pcdev->csicr1 = csicr1;
+	writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+	pcdev->icd = icd;
+
+	dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
+		 icd->devnum);
+
+	return 0;
+}
+
+static void mx2_camera_remove_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	BUG_ON(icd != pcdev->icd);
+
+	dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
+		 icd->devnum);
+
+	mx2_camera_deactivate(pcdev);
+
+	if (pcdev->discard_buffer) {
+		dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size,
+				pcdev->discard_buffer,
+				pcdev->discard_buffer_dma);
+		pcdev->discard_buffer = NULL;
+	}
+
+	pcdev->icd = NULL;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev)
+{
+	u32 tmp;
+
+	imx_dma_enable(pcdev->dma);
+
+	tmp = readl(pcdev->base_csi + CSICR1);
+	tmp |= CSICR1_RF_OR_INTEN;
+	writel(tmp, pcdev->base_csi + CSICR1);
+}
+
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	u32 status = readl(pcdev->base_csi + CSISR);
+
+	if (status & CSISR_SOF_INT && pcdev->active) {
+		u32 tmp;
+
+		tmp = readl(pcdev->base_csi + CSICR1);
+		writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1);
+		mx27_camera_dma_enable(pcdev);
+	}
+
+	writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
+
+	return IRQ_HANDLED;
+}
+#else
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+	return IRQ_NONE;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
+		int state)
+{
+	struct videobuf_buffer *vb;
+	struct mx2_buffer *buf;
+	struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active :
+		&pcdev->fb2_active;
+	u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	vb = &(*fb_active)->vb;
+	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	vb->state = state;
+	do_gettimeofday(&vb->ts);
+	vb->field_count++;
+
+	wake_up(&vb->done);
+
+	if (list_empty(&pcdev->capture)) {
+		buf = NULL;
+		writel(0, pcdev->base_csi + fb_reg);
+	} else {
+		buf = list_entry(pcdev->capture.next, struct mx2_buffer,
+				vb.queue);
+		vb = &buf->vb;
+		list_del(&vb->queue);
+		vb->state = VIDEOBUF_ACTIVE;
+		writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg);
+	}
+
+	*fb_active = buf;
+
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	u32 status = readl(pcdev->base_csi + CSISR);
+
+	if (status & CSISR_DMA_TSF_FB1_INT)
+		mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE);
+	else if (status & CSISR_DMA_TSF_FB2_INT)
+		mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE);
+
+	/* FIXME: handle CSISR_RFF_OR_INT */
+
+	writel(status, pcdev->base_csi + CSISR);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  Videobuf operations
+ */
+static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
+			      unsigned int *size)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+
+	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	*size = bytes_per_line * icd->user_height;
+
+	if (0 == *count)
+		*count = 32;
+	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
+		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
+
+	return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct videobuf_buffer *vb = &buf->vb;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	/*
+	 * This waits until this buffer is out of danger, i.e., until it is no
+	 * longer in STATE_QUEUED or STATE_ACTIVE
+	 */
+	videobuf_waiton(vb, 0, 0);
+
+	videobuf_dma_contig_free(vq, vb);
+	dev_dbg(&icd->dev, "%s freed\n", __func__);
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int mx2_videobuf_prepare(struct videobuf_queue *vq,
+		struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+	int ret = 0;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+#ifdef DEBUG
+	/*
+	 * This can be useful if you want to see if we actually fill
+	 * the buffer with something
+	 */
+	memset((void *)vb->baddr, 0xaa, vb->bsize);
+#endif
+
+	if (buf->code	!= icd->current_fmt->code ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
+	    vb->field	!= field) {
+		buf->code	= icd->current_fmt->code;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
+		vb->field	= field;
+		vb->state	= VIDEOBUF_NEEDS_INIT;
+	}
+
+	vb->size = bytes_per_line * vb->height;
+	if (vb->baddr && vb->bsize < vb->size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		ret = videobuf_iolock(vq, vb, NULL);
+		if (ret)
+			goto fail;
+
+		vb->state = VIDEOBUF_PREPARED;
+	}
+
+	return 0;
+
+fail:
+	free_buffer(vq, buf);
+out:
+	return ret;
+}
+
+static void mx2_videobuf_queue(struct videobuf_queue *vq,
+			       struct videobuf_buffer *vb)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	unsigned long flags;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	vb->state = VIDEOBUF_QUEUED;
+	list_add_tail(&vb->queue, &pcdev->capture);
+
+	if (mx27_camera_emma(pcdev)) {
+		goto out;
+#ifdef CONFIG_MACH_MX27
+	} else if (cpu_is_mx27()) {
+		int ret;
+
+		if (pcdev->active == NULL) {
+			ret = imx_dma_setup_single(pcdev->dma,
+					videobuf_to_dma_contig(vb), vb->size,
+					(u32)pcdev->base_dma + 0x10,
+					DMA_MODE_READ);
+			if (ret) {
+				vb->state = VIDEOBUF_ERROR;
+				wake_up(&vb->done);
+				goto out;
+			}
+
+			vb->state = VIDEOBUF_ACTIVE;
+			pcdev->active = buf;
+		}
+#endif
+	} else { /* cpu_is_mx25() */
+		u32 csicr3, dma_inten = 0;
+
+		if (pcdev->fb1_active == NULL) {
+			writel(videobuf_to_dma_contig(vb),
+					pcdev->base_csi + CSIDMASA_FB1);
+			pcdev->fb1_active = buf;
+			dma_inten = CSICR1_FB1_DMA_INTEN;
+		} else if (pcdev->fb2_active == NULL) {
+			writel(videobuf_to_dma_contig(vb),
+					pcdev->base_csi + CSIDMASA_FB2);
+			pcdev->fb2_active = buf;
+			dma_inten = CSICR1_FB2_DMA_INTEN;
+		}
+
+		if (dma_inten) {
+			list_del(&vb->queue);
+			vb->state = VIDEOBUF_ACTIVE;
+
+			csicr3 = readl(pcdev->base_csi + CSICR3);
+
+			/* Reflash DMA */
+			writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
+					pcdev->base_csi + CSICR3);
+
+			/* clear & enable interrupts */
+			writel(dma_inten, pcdev->base_csi + CSISR);
+			pcdev->csicr1 |= dma_inten;
+			writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+			/* enable DMA */
+			csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
+			writel(csicr3, pcdev->base_csi + CSICR3);
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx2_videobuf_release(struct videobuf_queue *vq,
+				 struct videobuf_buffer *vb)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	unsigned long flags;
+
+#ifdef DEBUG
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	switch (vb->state) {
+	case VIDEOBUF_ACTIVE:
+		dev_info(&icd->dev, "%s (active)\n", __func__);
+		break;
+	case VIDEOBUF_QUEUED:
+		dev_info(&icd->dev, "%s (queued)\n", __func__);
+		break;
+	case VIDEOBUF_PREPARED:
+		dev_info(&icd->dev, "%s (prepared)\n", __func__);
+		break;
+	default:
+		dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+				vb->state);
+		break;
+	}
+#endif
+
+	/*
+	 * Terminate only queued but inactive buffers. Active buffers are
+	 * released when they become inactive after videobuf_waiton().
+	 *
+	 * FIXME: implement forced termination of active buffers, so that the
+	 * user won't get stuck in an uninterruptible state. This requires a
+	 * specific handling for each of the three DMA types that this driver
+	 * supports.
+	 */
+	spin_lock_irqsave(&pcdev->lock, flags);
+	if (vb->state == VIDEOBUF_QUEUED) {
+		list_del(&vb->queue);
+		vb->state = VIDEOBUF_ERROR;
+	}
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+
+	free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops mx2_videobuf_ops = {
+	.buf_setup      = mx2_videobuf_setup,
+	.buf_prepare    = mx2_videobuf_prepare,
+	.buf_queue      = mx2_videobuf_queue,
+	.buf_release    = mx2_videobuf_release,
+};
+
+static void mx2_camera_init_videobuf(struct videobuf_queue *q,
+			      struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
+			&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd);
+}
+
+#define MX2_BUS_FLAGS	(SOCAM_DATAWIDTH_8 | \
+			SOCAM_MASTER | \
+			SOCAM_VSYNC_ACTIVE_HIGH | \
+			SOCAM_VSYNC_ACTIVE_LOW | \
+			SOCAM_HSYNC_ACTIVE_HIGH | \
+			SOCAM_HSYNC_ACTIVE_LOW | \
+			SOCAM_PCLK_SAMPLE_RISING | \
+			SOCAM_PCLK_SAMPLE_FALLING | \
+			SOCAM_DATA_ACTIVE_HIGH | \
+			SOCAM_DATA_ACTIVE_LOW)
+
+static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
+{
+	u32 cntl;
+	int count = 0;
+
+	cntl = readl(pcdev->base_emma + PRP_CNTL);
+	writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
+	while (count++ < 100) {
+		if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST))
+			return 0;
+		barrier();
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
+		int bytesperline)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	writel(pcdev->discard_buffer_dma,
+			pcdev->base_emma + PRP_DEST_RGB1_PTR);
+	writel(pcdev->discard_buffer_dma,
+			pcdev->base_emma + PRP_DEST_RGB2_PTR);
+
+	/*
+	 * We only use the EMMA engine to get rid of the broken
+	 * DMA Engine. No color space consversion at the moment.
+	 * We adjust incoming and outgoing pixelformat to rgb16
+	 * and adjust the bytesperline accordingly.
+	 */
+	writel(PRP_CNTL_CH1EN |
+			PRP_CNTL_CSIEN |
+			PRP_CNTL_DATA_IN_RGB16 |
+			PRP_CNTL_CH1_OUT_RGB16 |
+			PRP_CNTL_CH1_LEN |
+			PRP_CNTL_CH1BYP |
+			PRP_CNTL_CH1_TSKIP(0) |
+			PRP_CNTL_IN_TSKIP(0),
+			pcdev->base_emma + PRP_CNTL);
+
+	writel(((bytesperline >> 1) << 16) | icd->user_height,
+			pcdev->base_emma + PRP_SRC_FRAME_SIZE);
+	writel(((bytesperline >> 1) << 16) | icd->user_height,
+			pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
+	writel(bytesperline,
+			pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
+	writel(0x2ca00565, /* RGB565 */
+			pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
+	writel(0x2ca00565, /* RGB565 */
+			pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
+
+	/* Enable interrupts */
+	writel(PRP_INTR_RDERR |
+			PRP_INTR_CH1WERR |
+			PRP_INTR_CH2WERR |
+			PRP_INTR_CH1FC |
+			PRP_INTR_CH2FC |
+			PRP_INTR_LBOVF |
+			PRP_INTR_CH2OVF,
+			pcdev->base_emma + PRP_INTR_CNTL);
+}
+
+static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
+		__u32 pixfmt)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	unsigned long camera_flags, common_flags;
+	int ret = 0;
+	int bytesperline;
+	u32 csicr1 = pcdev->csicr1;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+
+	common_flags = soc_camera_bus_param_compatible(camera_flags,
+				MX2_BUS_FLAGS);
+	if (!common_flags)
+		return -EINVAL;
+
+	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+		if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+		else
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+	}
+
+	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+		if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
+			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+		else
+			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+	}
+
+	ret = icd->ops->set_bus_param(icd, common_flags);
+	if (ret < 0)
+		return ret;
+
+	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+		csicr1 |= CSICR1_INV_PCLK;
+	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+		csicr1 |= CSICR1_SOF_POL;
+	if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+		csicr1 |= CSICR1_HSYNC_POL;
+	if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+		csicr1 |= CSICR1_SWAP16_EN;
+	if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
+		csicr1 |= CSICR1_EXT_VSYNC;
+	if (pcdev->platform_flags & MX2_CAMERA_CCIR)
+		csicr1 |= CSICR1_CCIR_EN;
+	if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE)
+		csicr1 |= CSICR1_CCIR_MODE;
+	if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK)
+		csicr1 |= CSICR1_GCLK_MODE;
+	if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
+		csicr1 |= CSICR1_INV_DATA;
+	if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+		csicr1 |= CSICR1_PACK_DIR;
+
+	pcdev->csicr1 = csicr1;
+
+	bytesperline = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+	if (bytesperline < 0)
+		return bytesperline;
+
+	if (mx27_camera_emma(pcdev)) {
+		ret = mx27_camera_emma_prp_reset(pcdev);
+		if (ret)
+			return ret;
+
+		if (pcdev->discard_buffer)
+			dma_free_coherent(ici->v4l2_dev.dev,
+				pcdev->discard_size, pcdev->discard_buffer,
+				pcdev->discard_buffer_dma);
+
+		/*
+		 * I didn't manage to properly enable/disable the prp
+		 * on a per frame basis during running transfers,
+		 * thus we allocate a buffer here and use it to
+		 * discard frames when no buffer is available.
+		 * Feel free to work on this ;)
+		 */
+		pcdev->discard_size = icd->user_height * bytesperline;
+		pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
+				pcdev->discard_size, &pcdev->discard_buffer_dma,
+				GFP_KERNEL);
+		if (!pcdev->discard_buffer)
+			return -ENOMEM;
+
+		mx27_camera_emma_buf_init(icd, bytesperline);
+	} else if (cpu_is_mx25()) {
+		writel((bytesperline * icd->user_height) >> 2,
+				pcdev->base_csi + CSIRXCNT);
+		writel((bytesperline << 16) | icd->user_height,
+				pcdev->base_csi + CSIIMAG_PARA);
+	}
+
+	writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+	return 0;
+}
+
+static int mx2_camera_set_crop(struct soc_camera_device *icd,
+				struct v4l2_crop *a)
+{
+	struct v4l2_rect *rect = &a->c;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
+	soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
+
+	ret = v4l2_subdev_call(sd, video, s_crop, a);
+	if (ret < 0)
+		return ret;
+
+	/* The capture device might have changed its output  */
+	ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+		mf.width, mf.height);
+
+	icd->user_width		= mf.width;
+	icd->user_height	= mf.height;
+
+	return ret;
+}
+
+static int mx2_camera_set_fmt(struct soc_camera_device *icd,
+			       struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+	if (!xlate) {
+		dev_warn(icd->dev.parent, "Format %x not found\n",
+				pix->pixelformat);
+		return -EINVAL;
+	}
+
+	/* eMMA can only do RGB565 */
+	if (mx27_camera_emma(pcdev) && pix->pixelformat != V4L2_PIX_FMT_RGB565)
+		return -EINVAL;
+
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
+		return ret;
+
+	if (mf.code != xlate->code)
+		return -EINVAL;
+
+	pix->width		= mf.width;
+	pix->height		= mf.height;
+	pix->field		= mf.field;
+	pix->colorspace		= mf.colorspace;
+	icd->current_fmt	= xlate;
+
+	return 0;
+}
+
+static int mx2_camera_try_fmt(struct soc_camera_device *icd,
+				  struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	__u32 pixfmt = pix->pixelformat;
+	unsigned int width_limit;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (pixfmt && !xlate) {
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	/* FIXME: implement MX27 limits */
+
+	/* eMMA can only do RGB565 */
+	if (mx27_camera_emma(pcdev) && pixfmt != V4L2_PIX_FMT_RGB565)
+		return -EINVAL;
+
+	/* limit to MX25 hardware capabilities */
+	if (cpu_is_mx25()) {
+		if (xlate->host_fmt->bits_per_sample <= 8)
+			width_limit = 0xffff * 4;
+		else
+			width_limit = 0xffff * 2;
+		/* CSIIMAG_PARA limit */
+		if (pix->width > width_limit)
+			pix->width = width_limit;
+		if (pix->height > 0xffff)
+			pix->height = 0xffff;
+
+		pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
+				xlate->host_fmt);
+		if (pix->bytesperline < 0)
+			return pix->bytesperline;
+		pix->sizeimage = pix->height * pix->bytesperline;
+		if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
+			dev_warn(icd->dev.parent,
+					"Image size (%u) above limit\n",
+					pix->sizeimage);
+			return -EINVAL;
+		}
+	}
+
+	/* limit to sensor capabilities */
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	if (mf.field == V4L2_FIELD_ANY)
+		mf.field = V4L2_FIELD_NONE;
+	if (mf.field != V4L2_FIELD_NONE) {
+		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+				mf.field);
+		return -EINVAL;
+	}
+
+	pix->width	= mf.width;
+	pix->height	= mf.height;
+	pix->field	= mf.field;
+	pix->colorspace	= mf.colorspace;
+
+	return 0;
+}
+
+static int mx2_camera_querycap(struct soc_camera_host *ici,
+			       struct v4l2_capability *cap)
+{
+	/* cap->name is set by the friendly caller:-> */
+	strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
+	cap->version = MX2_CAM_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+
+	return 0;
+}
+
+static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+			      struct v4l2_requestbuffers *p)
+{
+	int i;
+
+	for (i = 0; i < p->count; i++) {
+		struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+						      struct mx2_buffer, vb);
+		INIT_LIST_HEAD(&buf->vb.queue);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state)
+{
+	struct videobuf_buffer *vb;
+	struct mx2_buffer *buf;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	if (!pcdev->active) {
+		dev_err(pcdev->dev, "%s called with no active buffer!\n",
+				__func__);
+		goto out;
+	}
+
+	vb = &pcdev->active->vb;
+	buf = container_of(vb, struct mx2_buffer, vb);
+	WARN_ON(list_empty(&vb->queue));
+	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	/* _init is used to debug races, see comment in pxa_camera_reqbufs() */
+	list_del_init(&vb->queue);
+	vb->state = state;
+	do_gettimeofday(&vb->ts);
+	vb->field_count++;
+
+	wake_up(&vb->done);
+
+	if (list_empty(&pcdev->capture)) {
+		pcdev->active = NULL;
+		goto out;
+	}
+
+	pcdev->active = list_entry(pcdev->capture.next,
+			struct mx2_buffer, vb.queue);
+
+	vb = &pcdev->active->vb;
+	vb->state = VIDEOBUF_ACTIVE;
+
+	ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
+			vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ);
+
+	if (ret) {
+		vb->state = VIDEOBUF_ERROR;
+		pcdev->active = NULL;
+		wake_up(&vb->done);
+	}
+
+out:
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx27_camera_dma_err_callback(int channel, void *data, int err)
+{
+	struct mx2_camera_dev *pcdev = data;
+
+	mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
+}
+
+static void mx27_camera_dma_callback(int channel, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+
+	mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
+}
+
+#define DMA_REQ_CSI_RX          31 /* FIXME: Add this to a resource */
+
+static int __devinit mx27_camera_dma_init(struct platform_device *pdev,
+		struct mx2_camera_dev *pcdev)
+{
+	int err;
+
+	pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
+	if (pcdev->dma < 0) {
+		dev_err(&pdev->dev, "%s failed to request DMA channel\n",
+				__func__);
+		return pcdev->dma;
+	}
+
+	err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
+					mx27_camera_dma_err_callback, pcdev);
+	if (err) {
+		dev_err(&pdev->dev, "%s failed to set DMA callback\n",
+				__func__);
+		goto err_out;
+	}
+
+	err = imx_dma_config_channel(pcdev->dma,
+			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+			DMA_REQ_CSI_RX, 1);
+	if (err) {
+		dev_err(&pdev->dev, "%s failed to config DMA channel\n",
+				__func__);
+		goto err_out;
+	}
+
+	imx_dma_config_burstlen(pcdev->dma, 64);
+
+	return 0;
+
+err_out:
+	imx_dma_free(pcdev->dma);
+
+	return err;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
+{
+	struct soc_camera_file *icf = file->private_data;
+
+	return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+}
+
+static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
+	.owner		= THIS_MODULE,
+	.add		= mx2_camera_add_device,
+	.remove		= mx2_camera_remove_device,
+	.set_fmt	= mx2_camera_set_fmt,
+	.set_crop	= mx2_camera_set_crop,
+	.try_fmt	= mx2_camera_try_fmt,
+	.init_videobuf	= mx2_camera_init_videobuf,
+	.reqbufs	= mx2_camera_reqbufs,
+	.poll		= mx2_camera_poll,
+	.querycap	= mx2_camera_querycap,
+	.set_bus_param	= mx2_camera_set_bus_param,
+};
+
+static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
+		int bufnum, int state)
+{
+	struct mx2_buffer *buf;
+	struct videobuf_buffer *vb;
+	unsigned long phys;
+
+	if (!list_empty(&pcdev->active_bufs)) {
+		buf = list_entry(pcdev->active_bufs.next,
+			struct mx2_buffer, vb.queue);
+
+		BUG_ON(buf->bufnum != bufnum);
+
+		vb = &buf->vb;
+#ifdef DEBUG
+		phys = videobuf_to_dma_contig(vb);
+		if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum)
+				!= phys) {
+			dev_err(pcdev->dev, "%p != %p\n", phys,
+					readl(pcdev->base_emma +
+						PRP_DEST_RGB1_PTR +
+						4 * bufnum));
+		}
+#endif
+		dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb,
+				vb->baddr, vb->bsize);
+
+		list_del(&vb->queue);
+		vb->state = state;
+		do_gettimeofday(&vb->ts);
+		vb->field_count++;
+
+		wake_up(&vb->done);
+	}
+
+	if (list_empty(&pcdev->capture)) {
+		writel(pcdev->discard_buffer_dma, pcdev->base_emma +
+				PRP_DEST_RGB1_PTR + 4 * bufnum);
+		return;
+	}
+
+	buf = list_entry(pcdev->capture.next,
+			struct mx2_buffer, vb.queue);
+
+	buf->bufnum = bufnum;
+
+	list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
+
+	vb = &buf->vb;
+	vb->state = VIDEOBUF_ACTIVE;
+
+	phys = videobuf_to_dma_contig(vb);
+	writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum);
+}
+
+static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
+	struct mx2_buffer *buf;
+
+	if (status & (1 << 7)) { /* overflow */
+		u32 cntl;
+		/*
+		 * We only disable channel 1 here since this is the only
+		 * enabled channel
+		 *
+		 * FIXME: the correct DMA overflow handling should be resetting
+		 * the buffer, returning an error frame, and continuing with
+		 * the next one.
+		 */
+		cntl = readl(pcdev->base_emma + PRP_CNTL);
+		writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL);
+		writel(cntl, pcdev->base_emma + PRP_CNTL);
+	}
+	if ((status & (3 << 5)) == (3 << 5)
+			&& !list_empty(&pcdev->active_bufs)) {
+		/*
+		 * Both buffers have triggered, process the one we're expecting
+		 * to first
+		 */
+		buf = list_entry(pcdev->active_bufs.next,
+			struct mx2_buffer, vb.queue);
+		mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE);
+		status &= ~(1 << (6 - buf->bufnum)); /* mark processed */
+	}
+	if (status & (1 << 6))
+		mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE);
+	if (status & (1 << 5))
+		mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE);
+
+	writel(status, pcdev->base_emma + PRP_INTRSTATUS);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev)
+{
+	struct resource *res_emma = pcdev->res_emma;
+	int err = 0;
+
+	if (!request_mem_region(res_emma->start, resource_size(res_emma),
+				MX2_CAM_DRV_NAME)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma));
+	if (!pcdev->base_emma) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+
+	err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0,
+			MX2_CAM_DRV_NAME, pcdev);
+	if (err) {
+		dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n");
+		goto exit_iounmap;
+	}
+
+	pcdev->clk_emma = clk_get(NULL, "emma");
+	if (IS_ERR(pcdev->clk_emma)) {
+		err = PTR_ERR(pcdev->clk_emma);
+		goto exit_free_irq;
+	}
+
+	clk_enable(pcdev->clk_emma);
+
+	err = mx27_camera_emma_prp_reset(pcdev);
+	if (err)
+		goto exit_clk_emma_put;
+
+	return err;
+
+exit_clk_emma_put:
+	clk_disable(pcdev->clk_emma);
+	clk_put(pcdev->clk_emma);
+exit_free_irq:
+	free_irq(pcdev->irq_emma, pcdev);
+exit_iounmap:
+	iounmap(pcdev->base_emma);
+exit_release:
+	release_mem_region(res_emma->start, resource_size(res_emma));
+out:
+	return err;
+}
+
+static int __devinit mx2_camera_probe(struct platform_device *pdev)
+{
+	struct mx2_camera_dev *pcdev;
+	struct resource *res_csi, *res_emma;
+	void __iomem *base_csi;
+	int irq_csi, irq_emma;
+	irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq
+		: mx27_camera_irq;
+	int err = 0;
+
+	dev_dbg(&pdev->dev, "initialising\n");
+
+	res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq_csi = platform_get_irq(pdev, 0);
+	if (res_csi == NULL || irq_csi < 0) {
+		dev_err(&pdev->dev, "Missing platform resources data\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
+	if (!pcdev) {
+		dev_err(&pdev->dev, "Could not allocate pcdev\n");
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	pcdev->clk_csi = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pcdev->clk_csi)) {
+		err = PTR_ERR(pcdev->clk_csi);
+		goto exit_kfree;
+	}
+
+	dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n",
+			clk_get_rate(pcdev->clk_csi));
+
+	/* Initialize DMA */
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		err = mx27_camera_dma_init(pdev, pcdev);
+		if (err)
+			goto exit_clk_put;
+	}
+#endif /* CONFIG_MACH_MX27 */
+
+	pcdev->res_csi = res_csi;
+	pcdev->pdata = pdev->dev.platform_data;
+	if (pcdev->pdata) {
+		long rate;
+
+		pcdev->platform_flags = pcdev->pdata->flags;
+
+		rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+		if (rate <= 0) {
+			err = -ENODEV;
+			goto exit_dma_free;
+		}
+		err = clk_set_rate(pcdev->clk_csi, rate);
+		if (err < 0)
+			goto exit_dma_free;
+	}
+
+	INIT_LIST_HEAD(&pcdev->capture);
+	INIT_LIST_HEAD(&pcdev->active_bufs);
+	spin_lock_init(&pcdev->lock);
+
+	/*
+	 * Request the regions.
+	 */
+	if (!request_mem_region(res_csi->start, resource_size(res_csi),
+				MX2_CAM_DRV_NAME)) {
+		err = -EBUSY;
+		goto exit_dma_free;
+	}
+
+	base_csi = ioremap(res_csi->start, resource_size(res_csi));
+	if (!base_csi) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	pcdev->irq_csi = irq_csi;
+	pcdev->base_csi = base_csi;
+	pcdev->base_dma = res_csi->start;
+	pcdev->dev = &pdev->dev;
+
+	err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0,
+			MX2_CAM_DRV_NAME, pcdev);
+	if (err) {
+		dev_err(pcdev->dev, "Camera interrupt register failed \n");
+		goto exit_iounmap;
+	}
+
+	if (cpu_is_mx27()) {
+		/* EMMA support */
+		res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		irq_emma = platform_get_irq(pdev, 1);
+
+		if (res_emma && irq_emma >= 0) {
+			dev_info(&pdev->dev, "Using EMMA\n");
+			pcdev->use_emma = 1;
+			pcdev->res_emma = res_emma;
+			pcdev->irq_emma = irq_emma;
+			if (mx27_camera_emma_init(pcdev))
+				goto exit_free_irq;
+		}
+	}
+
+	pcdev->soc_host.drv_name	= MX2_CAM_DRV_NAME,
+	pcdev->soc_host.ops		= &mx2_soc_camera_host_ops,
+	pcdev->soc_host.priv		= pcdev;
+	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
+	pcdev->soc_host.nr		= pdev->id;
+	err = soc_camera_host_register(&pcdev->soc_host);
+	if (err)
+		goto exit_free_emma;
+
+	return 0;
+
+exit_free_emma:
+	if (mx27_camera_emma(pcdev)) {
+		free_irq(pcdev->irq_emma, pcdev);
+		clk_disable(pcdev->clk_emma);
+		clk_put(pcdev->clk_emma);
+		iounmap(pcdev->base_emma);
+		release_mem_region(res_emma->start, resource_size(res_emma));
+	}
+exit_free_irq:
+	free_irq(pcdev->irq_csi, pcdev);
+exit_iounmap:
+	iounmap(base_csi);
+exit_release:
+	release_mem_region(res_csi->start, resource_size(res_csi));
+exit_dma_free:
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dma_free(pcdev->dma);
+exit_clk_put:
+	clk_put(pcdev->clk_csi);
+#endif /* CONFIG_MACH_MX27 */
+exit_kfree:
+	kfree(pcdev);
+exit:
+	return err;
+}
+
+static int __devexit mx2_camera_remove(struct platform_device *pdev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct mx2_camera_dev *pcdev = container_of(soc_host,
+			struct mx2_camera_dev, soc_host);
+	struct resource *res;
+
+	clk_put(pcdev->clk_csi);
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dma_free(pcdev->dma);
+#endif /* CONFIG_MACH_MX27 */
+	free_irq(pcdev->irq_csi, pcdev);
+	if (mx27_camera_emma(pcdev))
+		free_irq(pcdev->irq_emma, pcdev);
+
+	soc_camera_host_unregister(&pcdev->soc_host);
+
+	iounmap(pcdev->base_csi);
+
+	if (mx27_camera_emma(pcdev)) {
+		clk_disable(pcdev->clk_emma);
+		clk_put(pcdev->clk_emma);
+		iounmap(pcdev->base_emma);
+		res = pcdev->res_emma;
+		release_mem_region(res->start, resource_size(res));
+	}
+
+	res = pcdev->res_csi;
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(pcdev);
+
+	dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
+
+	return 0;
+}
+
+static struct platform_driver mx2_camera_driver = {
+	.driver 	= {
+		.name	= MX2_CAM_DRV_NAME,
+	},
+	.remove		= __devexit_p(mx2_camera_remove),
+};
+
+
+static int __init mx2_camera_init(void)
+{
+	return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe);
+}
+
+static void __exit mx2_camera_exit(void)
+{
+	return platform_driver_unregister(&mx2_camera_driver);
+}
+
+module_init(mx2_camera_init);
+module_exit(mx2_camera_exit);
+
+MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
+MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index d477e305800..a9be14c2391 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -672,7 +672,7 @@ static bool mx3_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -689,7 +689,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
 		dev_err(icd->dev.parent,
-			"Invalid format code #%d: %d\n", idx, code);
+			"Invalid format code #%u: %d\n", idx, code);
 		return 0;
 	}
 
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index 97c53949ca8..e63233fd2aa 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,8 +1,8 @@
 config VIDEO_OMAP2_VOUT
 	tristate "OMAP2/OMAP3 V4L2-Display driver"
-	depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 	select VIDEOBUF_GEN
-	select VIDEOBUF_DMA_SG
+	select VIDEOBUF_DMA_CONTIG
 	select OMAP2_DSS
 	select OMAP2_VRAM
 	select OMAP2_VRFB
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b8bab00ad01..b28788070ae 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -3,5 +3,5 @@
 #
 
 # OMAP2/3 Display driver
-omap-vout-mod-objs := omap_vout.o omap_voutlib.o
-obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout-mod.o
+omap-vout-y := omap_vout.o omap_voutlib.o
+obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4c0ab499228..4ed51b1552e 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -38,8 +38,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/videodev2.h>
+#include <linux/slab.h>
 
-#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
@@ -1053,9 +1054,9 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 			    struct videobuf_buffer *vb,
 			    enum v4l2_field field)
 {
+	dma_addr_t dmabuf;
 	struct vid_vrfb_dma *tx;
 	enum dss_rotation rotation;
-	struct videobuf_dmabuf *dmabuf = NULL;
 	struct omap_vout_device *vout = q->priv_data;
 	u32 dest_frame_index = 0, src_element_index = 0;
 	u32 dest_element_index = 0, src_frame_index = 0;
@@ -1074,24 +1075,17 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 	if (V4L2_MEMORY_USERPTR == vb->memory) {
 		if (0 == vb->baddr)
 			return -EINVAL;
-		/* Virtual address */
-		/* priv points to struct videobuf_pci_sg_memory. But we went
-		 * pointer to videobuf_dmabuf, which is member of
-		 * videobuf_pci_sg_memory */
-		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
-		dmabuf->vmalloc = (void *) vb->baddr;
-
 		/* Physical address */
-		dmabuf->bus_addr =
-			(dma_addr_t) omap_vout_uservirt_to_phys(vb->baddr);
+		vout->queued_buf_addr[vb->i] = (u8 *)
+			omap_vout_uservirt_to_phys(vb->baddr);
+	} else {
+		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 	}
 
-	if (!rotation_enabled(vout)) {
-		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
-		vout->queued_buf_addr[vb->i] = (u8 *) dmabuf->bus_addr;
+	if (!rotation_enabled(vout))
 		return 0;
-	}
-	dmabuf = videobuf_to_dma(q->bufs[vb->i]);
+
+	dmabuf = vout->buf_phy_addr[vb->i];
 	/* If rotation is enabled, copy input buffer into VRFB
 	 * memory space using DMA. We are copying input buffer
 	 * into VRFB memory space of desired angle and DSS will
@@ -1120,7 +1114,7 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 			tx->dev_id, 0x0);
 	/* src_port required only for OMAP1 */
 	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-			dmabuf->bus_addr, src_element_index, src_frame_index);
+			dmabuf, src_element_index, src_frame_index);
 	/*set dma source burst mode for VRFB */
 	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
 	rotation = calc_rotation(vout);
@@ -1211,7 +1205,6 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 	void *pos;
 	unsigned long start = vma->vm_start;
 	unsigned long size = (vma->vm_end - vma->vm_start);
-	struct videobuf_dmabuf *dmabuf = NULL;
 	struct omap_vout_device *vout = file->private_data;
 	struct videobuf_queue *q = &vout->vbq;
 
@@ -1241,8 +1234,7 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &omap_vout_vm_ops;
 	vma->vm_private_data = (void *) vout;
-	dmabuf = videobuf_to_dma(q->bufs[i]);
-	pos = dmabuf->vmalloc;
+	pos = (void *)vout->buf_virt_addr[i];
 	vma->vm_pgoff = virt_to_phys((void *)pos) >> PAGE_SHIFT;
 	while (size > 0) {
 		unsigned long pfn;
@@ -1347,8 +1339,8 @@ static int omap_vout_open(struct file *file)
 	video_vbq_ops.buf_queue = omap_vout_buffer_queue;
 	spin_lock_init(&vout->vbq_lock);
 
-	videobuf_queue_sg_init(q, &video_vbq_ops, NULL, &vout->vbq_lock,
-			vout->type, V4L2_FIELD_NONE,
+	videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev,
+			&vout->vbq_lock, vout->type, V4L2_FIELD_NONE,
 			sizeof(struct videobuf_buffer), vout);
 
 	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
@@ -1799,7 +1791,6 @@ static int vidioc_reqbufs(struct file *file, void *fh,
 	unsigned int i, num_buffers = 0;
 	struct omap_vout_device *vout = fh;
 	struct videobuf_queue *q = &vout->vbq;
-	struct videobuf_dmabuf *dmabuf = NULL;
 
 	if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
 		return -EINVAL;
@@ -1825,8 +1816,7 @@ static int vidioc_reqbufs(struct file *file, void *fh,
 		num_buffers = (vout->vid == OMAP_VIDEO1) ?
 			video1_numbuffers : video2_numbuffers;
 		for (i = num_buffers; i < vout->buffer_allocated; i++) {
-			dmabuf = videobuf_to_dma(q->bufs[i]);
-			omap_vout_free_buffer((u32)dmabuf->vmalloc,
+			omap_vout_free_buffer(vout->buf_virt_addr[i],
 					vout->buffer_size);
 			vout->buf_virt_addr[i] = 0;
 			vout->buf_phy_addr[i] = 0;
@@ -1855,12 +1845,7 @@ static int vidioc_reqbufs(struct file *file, void *fh,
 		goto reqbuf_err;
 
 	vout->buffer_allocated = req->count;
-	for (i = 0; i < req->count; i++) {
-		dmabuf = videobuf_to_dma(q->bufs[i]);
-		dmabuf->vmalloc = (void *) vout->buf_virt_addr[i];
-		dmabuf->bus_addr = (dma_addr_t) vout->buf_phy_addr[i];
-		dmabuf->sglen = 1;
-	}
+
 reqbuf_err:
 	mutex_unlock(&vout->lock);
 	return ret;
@@ -2371,12 +2356,11 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 
 	for (k = 0; k < pdev->num_resources; k++) {
 
-		vout = kmalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
+		vout = kzalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
 		if (!vout) {
 			dev_err(&pdev->dev, ": could not allocate memory\n");
 			return -ENOMEM;
 		}
-		memset(vout, 0, sizeof(struct omap_vout_device));
 
 		vout->vid = k;
 		vid_dev->vouts[k] = vout;
@@ -2489,7 +2473,7 @@ static int omap_vout_remove(struct platform_device *pdev)
 
 	for (k = 0; k < vid_dev->num_displays; k++) {
 		if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED)
-			vid_dev->displays[k]->disable(vid_dev->displays[k]);
+			vid_dev->displays[k]->driver->disable(vid_dev->displays[k]);
 
 		omap_dss_put_device(vid_dev->displays[k]);
 	}
@@ -2546,7 +2530,9 @@ static int __init omap_vout_probe(struct platform_device *pdev)
 			def_display = NULL;
 		}
 		if (def_display) {
-			ret = def_display->enable(def_display);
+			struct omap_dss_driver *dssdrv = def_display->driver;
+
+			ret = dssdrv->enable(def_display);
 			if (ret) {
 				/* Here we are not considering a error
 				 *  as display may be enabled by frame
@@ -2559,22 +2545,14 @@ static int __init omap_vout_probe(struct platform_device *pdev)
 			/* set the update mode */
 			if (def_display->caps &
 					OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
-#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
-				if (def_display->enable_te)
-					def_display->enable_te(def_display, 1);
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
-							OMAP_DSS_UPDATE_AUTO);
-#else	/* MANUAL_UPDATE */
-				if (def_display->enable_te)
-					def_display->enable_te(def_display, 0);
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
+				if (dssdrv->enable_te)
+					dssdrv->enable_te(def_display, 0);
+				if (dssdrv->set_update_mode)
+					dssdrv->set_update_mode(def_display,
 							OMAP_DSS_UPDATE_MANUAL);
-#endif
 			} else {
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
+				if (dssdrv->set_update_mode)
+					dssdrv->set_update_mode(def_display,
 							OMAP_DSS_UPDATE_AUTO);
 			}
 		}
@@ -2593,8 +2571,8 @@ static int __init omap_vout_probe(struct platform_device *pdev)
 	for (i = 0; i < vid_dev->num_displays; i++) {
 		struct omap_dss_device *display = vid_dev->displays[i];
 
-		if (display->update)
-			display->update(display, 0, 0,
+		if (display->driver->update)
+			display->driver->update(display, 0, 0,
 					display->panel.timings.x_res,
 					display->panel.timings.y_res);
 	}
@@ -2609,8 +2587,8 @@ probe_err1:
 		if (ovl->manager && ovl->manager->device)
 			def_display = ovl->manager->device;
 
-		if (def_display)
-			def_display->disable(def_display);
+		if (def_display && def_display->driver)
+			def_display->driver->disable(def_display);
 	}
 probe_err0:
 	kfree(vid_dev);
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index f85b2ed8a2d..926a5aa6f7f 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -426,7 +426,7 @@ static void omap24xxcam_vbq_release(struct videobuf_queue *vbq,
 			     dma->direction);
 		dma->direction = DMA_NONE;
 	} else {
-		videobuf_dma_unmap(vbq, videobuf_to_dma(vb));
+		videobuf_dma_unmap(vbq->dev, videobuf_to_dma(vb));
 		videobuf_dma_free(videobuf_to_dma(vb));
 	}
 
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
deleted file mode 100644
index a10912097b7..00000000000
--- a/drivers/media/video/ov511.c
+++ /dev/null
@@ -1,5995 +0,0 @@
-/*
- * OmniVision OV511 Camera-to-USB Bridge Driver
- *
- * Copyright (c) 1999-2003 Mark W. McClelland
- * Original decompression code Copyright 1998-2000 OmniVision Technologies
- * Many improvements by Bret Wallach <bwallac1@san.rr.com>
- * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
- * Snapshot code by Kevin Moore
- * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
- * Changes by Claudio Matsuoka <claudio@conectiva.com>
- * Original SAA7111A code by Dave Perks <dperks@ibm.net>
- * URB error messages from pwc driver by Nemosoft
- * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox
- * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others
- *
- * Based on the Linux CPiA driver written by Peter Pregler,
- * Scott J. Bertin and Johannes Erdfelt.
- *
- * Please see the file: Documentation/usb/ov511.txt
- * and the website at:  http://alpha.dyndns.org/ov511
- * for more info.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <linux/pagemap.h>
-#include <asm/processor.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-#if defined (__i386__)
-	#include <asm/cpufeature.h>
-#endif
-
-#include "ov511.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.64 for Linux 2.5"
-#define EMAIL "mark@alpha.dyndns.org"
-#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \
-& Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \
-<cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>"
-#define DRIVER_DESC "ov511 USB Camera Driver"
-
-#define OV511_I2C_RETRIES 3
-#define ENABLE_Y_QUANTABLE 1
-#define ENABLE_UV_QUANTABLE 1
-
-#define OV511_MAX_UNIT_VIDEO 16
-
-/* Pixel count * bytes per YUV420 pixel (1.5) */
-#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2)
-
-#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval))
-
-/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */
-#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024)
-
-#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM)
-
-/**********************************************************************
- * Module Parameters
- * (See ov511.txt for detailed descriptions of these)
- **********************************************************************/
-
-/* These variables (and all static globals) default to zero */
-static int autobright		= 1;
-static int autogain		= 1;
-static int autoexp		= 1;
-static int debug;
-static int snapshot;
-static int cams			= 1;
-static int compress;
-static int testpat;
-static int dumppix;
-static int led 			= 1;
-static int dump_bridge;
-static int dump_sensor;
-static int printph;
-static int phy			= 0x1f;
-static int phuv			= 0x05;
-static int pvy			= 0x06;
-static int pvuv			= 0x06;
-static int qhy			= 0x14;
-static int qhuv			= 0x03;
-static int qvy			= 0x04;
-static int qvuv			= 0x04;
-static int lightfreq;
-static int bandingfilter;
-static int clockdiv		= -1;
-static int packetsize		= -1;
-static int framedrop		= -1;
-static int fastset;
-static int force_palette;
-static int backlight;
-/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */
-static unsigned long ov511_devused;
-static int unit_video[OV511_MAX_UNIT_VIDEO];
-static int remove_zeros;
-static int mirror;
-static int ov518_color;
-
-module_param(autobright, int, 0);
-MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness");
-module_param(autogain, int, 0);
-MODULE_PARM_DESC(autogain, "Sensor automatically changes gain");
-module_param(autoexp, int, 0);
-MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure");
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,
-  "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max");
-module_param(snapshot, int, 0);
-MODULE_PARM_DESC(snapshot, "Enable snapshot mode");
-module_param(cams, int, 0);
-MODULE_PARM_DESC(cams, "Number of simultaneous cameras");
-module_param(compress, int, 0);
-MODULE_PARM_DESC(compress, "Turn on compression");
-module_param(testpat, int, 0);
-MODULE_PARM_DESC(testpat,
-  "Replace image with vertical bar testpattern (only partially working)");
-module_param(dumppix, int, 0);
-MODULE_PARM_DESC(dumppix, "Dump raw pixel data");
-module_param(led, int, 0);
-MODULE_PARM_DESC(led,
-  "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)");
-module_param(dump_bridge, int, 0);
-MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers");
-module_param(dump_sensor, int, 0);
-MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers");
-module_param(printph, int, 0);
-MODULE_PARM_DESC(printph, "Print frame start/end headers");
-module_param(phy, int, 0);
-MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)");
-module_param(phuv, int, 0);
-MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)");
-module_param(pvy, int, 0);
-MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)");
-module_param(pvuv, int, 0);
-MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)");
-module_param(qhy, int, 0);
-MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)");
-module_param(qhuv, int, 0);
-MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)");
-module_param(qvy, int, 0);
-MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)");
-module_param(qvuv, int, 0);
-MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)");
-module_param(lightfreq, int, 0);
-MODULE_PARM_DESC(lightfreq,
-  "Light frequency. Set to 50 or 60 Hz, or zero for default settings");
-module_param(bandingfilter, int, 0);
-MODULE_PARM_DESC(bandingfilter,
-  "Enable banding filter (to reduce effects of fluorescent lighting)");
-module_param(clockdiv, int, 0);
-MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value");
-module_param(packetsize, int, 0);
-MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size");
-module_param(framedrop, int, 0);
-MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting");
-module_param(fastset, int, 0);
-MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately");
-module_param(force_palette, int, 0);
-MODULE_PARM_DESC(force_palette, "Force the palette to a specific value");
-module_param(backlight, int, 0);
-MODULE_PARM_DESC(backlight, "For objects that are lit from behind");
-static unsigned int num_uv;
-module_param_array(unit_video, int, &num_uv, 0);
-MODULE_PARM_DESC(unit_video,
-  "Force use of specific minor number(s). 0 is not allowed.");
-module_param(remove_zeros, int, 0);
-MODULE_PARM_DESC(remove_zeros,
-  "Remove zero-padding from uncompressed incoming data");
-module_param(mirror, int, 0);
-MODULE_PARM_DESC(mirror, "Reverse image horizontally");
-module_param(ov518_color, int, 0);
-MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)");
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-/**********************************************************************
- * Miscellaneous Globals
- **********************************************************************/
-
-static struct usb_driver ov511_driver;
-
-/* Number of times to retry a failed I2C transaction. Increase this if you
- * are getting "Failed to read sensor ID..." */
-static const int i2c_detect_tries = 5;
-
-static struct usb_device_id device_table [] = {
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
-	{ USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
-	{ }  /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, device_table);
-
-static unsigned char yQuanTable511[] = OV511_YQUANTABLE;
-static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE;
-static unsigned char yQuanTable518[] = OV518_YQUANTABLE;
-static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE;
-
-/**********************************************************************
- * Symbolic Names
- **********************************************************************/
-
-/* Known OV511-based cameras */
-static struct symbolic_list camlist[] = {
-	{   0, "Generic Camera (no ID)" },
-	{   1, "Mustek WCam 3X" },
-	{   3, "D-Link DSB-C300" },
-	{   4, "Generic OV511/OV7610" },
-	{   5, "Puretek PT-6007" },
-	{   6, "Lifeview USB Life TV (NTSC)" },
-	{  21, "Creative Labs WebCam 3" },
-	{  22, "Lifeview USB Life TV (PAL D/K+B/G)" },
-	{  36, "Koala-Cam" },
-	{  38, "Lifeview USB Life TV (PAL)" },
-	{  41, "Samsung Anycam MPC-M10" },
-	{  43, "Mtekvision Zeca MV402" },
-	{  46, "Suma eON" },
-	{  70, "Lifeview USB Life TV (PAL/SECAM)" },
-	{ 100, "Lifeview RoboCam" },
-	{ 102, "AverMedia InterCam Elite" },
-	{ 112, "MediaForte MV300" },	/* or OV7110 evaluation kit */
-	{ 134, "Ezonics EZCam II" },
-	{ 192, "Webeye 2000B" },
-	{ 253, "Alpha Vision Tech. AlphaCam SE" },
-	{  -1, NULL }
-};
-
-/* Video4Linux1 Palettes */
-static struct symbolic_list v4l1_plist[] = {
-	{ VIDEO_PALETTE_GREY,	"GREY" },
-	{ VIDEO_PALETTE_HI240,	"HI240" },
-	{ VIDEO_PALETTE_RGB565,	"RGB565" },
-	{ VIDEO_PALETTE_RGB24,	"RGB24" },
-	{ VIDEO_PALETTE_RGB32,	"RGB32" },
-	{ VIDEO_PALETTE_RGB555,	"RGB555" },
-	{ VIDEO_PALETTE_YUV422,	"YUV422" },
-	{ VIDEO_PALETTE_YUYV,	"YUYV" },
-	{ VIDEO_PALETTE_UYVY,	"UYVY" },
-	{ VIDEO_PALETTE_YUV420,	"YUV420" },
-	{ VIDEO_PALETTE_YUV411,	"YUV411" },
-	{ VIDEO_PALETTE_RAW,	"RAW" },
-	{ VIDEO_PALETTE_YUV422P,"YUV422P" },
-	{ VIDEO_PALETTE_YUV411P,"YUV411P" },
-	{ VIDEO_PALETTE_YUV420P,"YUV420P" },
-	{ VIDEO_PALETTE_YUV410P,"YUV410P" },
-	{ -1, NULL }
-};
-
-static struct symbolic_list brglist[] = {
-	{ BRG_OV511,		"OV511" },
-	{ BRG_OV511PLUS,	"OV511+" },
-	{ BRG_OV518,		"OV518" },
-	{ BRG_OV518PLUS,	"OV518+" },
-	{ -1, NULL }
-};
-
-static struct symbolic_list senlist[] = {
-	{ SEN_OV76BE,	"OV76BE" },
-	{ SEN_OV7610,	"OV7610" },
-	{ SEN_OV7620,	"OV7620" },
-	{ SEN_OV7620AE,	"OV7620AE" },
-	{ SEN_OV6620,	"OV6620" },
-	{ SEN_OV6630,	"OV6630" },
-	{ SEN_OV6630AE,	"OV6630AE" },
-	{ SEN_OV6630AF,	"OV6630AF" },
-	{ SEN_OV8600,	"OV8600" },
-	{ SEN_KS0127,	"KS0127" },
-	{ SEN_KS0127B,	"KS0127B" },
-	{ SEN_SAA7111A,	"SAA7111A" },
-	{ -1, NULL }
-};
-
-/* URB error codes: */
-static struct symbolic_list urb_errlist[] = {
-	{ -ENOSR,	"Buffer error (overrun)" },
-	{ -EPIPE,	"Stalled (device not responding)" },
-	{ -EOVERFLOW,	"Babble (device sends too much data)" },
-	{ -EPROTO,	"Bit-stuff error (bad cable?)" },
-	{ -EILSEQ,	"CRC/Timeout (bad cable?)" },
-	{ -ETIME,	"Device does not respond to token" },
-	{ -ETIMEDOUT,	"Device does not respond to command" },
-	{ -1, NULL }
-};
-
-/**********************************************************************
- * Memory management
- **********************************************************************/
-static void *
-rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void
-rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-/**********************************************************************
- *
- * Register I/O
- *
- **********************************************************************/
-
-/* Write an OV51x register */
-static int
-reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
-{
-	int rc;
-
-	PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
-	mutex_lock(&ov->cbuf_lock);
-	ov->cbuf[0] = value;
-	rc = usb_control_msg(ov->dev,
-			     usb_sndctrlpipe(ov->dev, 0),
-			     (ov->bclass == BCL_OV518)?1:2 /* REG_IO */,
-			     USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			     0, (__u16)reg, &ov->cbuf[0], 1, 1000);
-	mutex_unlock(&ov->cbuf_lock);
-
-	if (rc < 0)
-		err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc));
-
-	return rc;
-}
-
-/* Read from an OV51x register */
-/* returns: negative is error, pos or zero is data */
-static int
-reg_r(struct usb_ov511 *ov, unsigned char reg)
-{
-	int rc;
-
-	mutex_lock(&ov->cbuf_lock);
-	rc = usb_control_msg(ov->dev,
-			     usb_rcvctrlpipe(ov->dev, 0),
-			     (ov->bclass == BCL_OV518)?1:3 /* REG_IO */,
-			     USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			     0, (__u16)reg, &ov->cbuf[0], 1, 1000);
-
-	if (rc < 0) {
-		err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc));
-	} else {
-		rc = ov->cbuf[0];
-		PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]);
-	}
-
-	mutex_unlock(&ov->cbuf_lock);
-
-	return rc;
-}
-
-/*
- * Writes bits at positions specified by mask to an OV51x reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-static int
-reg_w_mask(struct usb_ov511 *ov,
-	   unsigned char reg,
-	   unsigned char value,
-	   unsigned char mask)
-{
-	int ret;
-	unsigned char oldval, newval;
-
-	ret = reg_r(ov, reg);
-	if (ret < 0)
-		return ret;
-
-	oldval = (unsigned char) ret;
-	oldval &= (~mask);		/* Clear the masked bits */
-	value &= mask;			/* Enforce mask on value */
-	newval = oldval | value;	/* Set the desired bits */
-
-	return (reg_w(ov, reg, newval));
-}
-
-/*
- * Writes multiple (n) byte value to a single register. Only valid with certain
- * registers (0x30 and 0xc4 - 0xce).
- */
-static int
-ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n)
-{
-	int rc;
-
-	PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n);
-
-	mutex_lock(&ov->cbuf_lock);
-
-	*((__le32 *)ov->cbuf) = __cpu_to_le32(val);
-
-	rc = usb_control_msg(ov->dev,
-			     usb_sndctrlpipe(ov->dev, 0),
-			     1 /* REG_IO */,
-			     USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			     0, (__u16)reg, ov->cbuf, n, 1000);
-	mutex_unlock(&ov->cbuf_lock);
-
-	if (rc < 0)
-		err("reg write multiple: error %d: %s", rc,
-		    symbolic(urb_errlist, rc));
-
-	return rc;
-}
-
-static int
-ov511_upload_quan_tables(struct usb_ov511 *ov)
-{
-	unsigned char *pYTable = yQuanTable511;
-	unsigned char *pUVTable = uvQuanTable511;
-	unsigned char val0, val1;
-	int i, rc, reg = R511_COMP_LUT_BEGIN;
-
-	PDEBUG(4, "Uploading quantization tables");
-
-	for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) {
-		if (ENABLE_Y_QUANTABLE)	{
-			val0 = *pYTable++;
-			val1 = *pYTable++;
-			val0 &= 0x0f;
-			val1 &= 0x0f;
-			val0 |= val1 << 4;
-			rc = reg_w(ov, reg, val0);
-			if (rc < 0)
-				return rc;
-		}
-
-		if (ENABLE_UV_QUANTABLE) {
-			val0 = *pUVTable++;
-			val1 = *pUVTable++;
-			val0 &= 0x0f;
-			val1 &= 0x0f;
-			val0 |= val1 << 4;
-			rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0);
-			if (rc < 0)
-				return rc;
-		}
-
-		reg++;
-	}
-
-	return 0;
-}
-
-/* OV518 quantization tables are 8x4 (instead of 8x8) */
-static int
-ov518_upload_quan_tables(struct usb_ov511 *ov)
-{
-	unsigned char *pYTable = yQuanTable518;
-	unsigned char *pUVTable = uvQuanTable518;
-	unsigned char val0, val1;
-	int i, rc, reg = R511_COMP_LUT_BEGIN;
-
-	PDEBUG(4, "Uploading quantization tables");
-
-	for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) {
-		if (ENABLE_Y_QUANTABLE) {
-			val0 = *pYTable++;
-			val1 = *pYTable++;
-			val0 &= 0x0f;
-			val1 &= 0x0f;
-			val0 |= val1 << 4;
-			rc = reg_w(ov, reg, val0);
-			if (rc < 0)
-				return rc;
-		}
-
-		if (ENABLE_UV_QUANTABLE) {
-			val0 = *pUVTable++;
-			val1 = *pUVTable++;
-			val0 &= 0x0f;
-			val1 &= 0x0f;
-			val0 |= val1 << 4;
-			rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0);
-			if (rc < 0)
-				return rc;
-		}
-
-		reg++;
-	}
-
-	return 0;
-}
-
-static int
-ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type)
-{
-	int rc;
-
-	/* Setting bit 0 not allowed on 518/518Plus */
-	if (ov->bclass == BCL_OV518)
-		reset_type &= 0xfe;
-
-	PDEBUG(4, "Reset: type=0x%02X", reset_type);
-
-	rc = reg_w(ov, R51x_SYS_RESET, reset_type);
-	rc = reg_w(ov, R51x_SYS_RESET, 0);
-
-	if (rc < 0)
-		err("reset: command failed");
-
-	return rc;
-}
-
-/**********************************************************************
- *
- * Low-level I2C I/O functions
- *
- **********************************************************************/
-
-/* NOTE: Do not call this function directly!
- * The OV518 I2C I/O procedure is different, hence, this function.
- * This is normally only called from i2c_w(). Note that this function
- * always succeeds regardless of whether the sensor is present and working.
- */
-static int
-ov518_i2c_write_internal(struct usb_ov511 *ov,
-			 unsigned char reg,
-			 unsigned char value)
-{
-	int rc;
-
-	PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
-	/* Select camera register */
-	rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
-	if (rc < 0)
-		return rc;
-
-	/* Write "value" to I2C data port of OV511 */
-	rc = reg_w(ov, R51x_I2C_DATA, value);
-	if (rc < 0)
-		return rc;
-
-	/* Initiate 3-byte write cycle */
-	rc = reg_w(ov, R518_I2C_CTL, 0x01);
-	if (rc < 0)
-		return rc;
-
-	return 0;
-}
-
-/* NOTE: Do not call this function directly! */
-static int
-ov511_i2c_write_internal(struct usb_ov511 *ov,
-			 unsigned char reg,
-			 unsigned char value)
-{
-	int rc, retries;
-
-	PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
-	/* Three byte write cycle */
-	for (retries = OV511_I2C_RETRIES; ; ) {
-		/* Select camera register */
-		rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
-		if (rc < 0)
-			break;
-
-		/* Write "value" to I2C data port of OV511 */
-		rc = reg_w(ov, R51x_I2C_DATA, value);
-		if (rc < 0)
-			break;
-
-		/* Initiate 3-byte write cycle */
-		rc = reg_w(ov, R511_I2C_CTL, 0x01);
-		if (rc < 0)
-			break;
-
-		/* Retry until idle */
-		do {
-			rc = reg_r(ov, R511_I2C_CTL);
-		} while (rc > 0 && ((rc&1) == 0));
-		if (rc < 0)
-			break;
-
-		/* Ack? */
-		if ((rc&2) == 0) {
-			rc = 0;
-			break;
-		}
-#if 0
-		/* I2C abort */
-		reg_w(ov, R511_I2C_CTL, 0x10);
-#endif
-		if (--retries < 0) {
-			err("i2c write retries exhausted");
-			rc = -1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-/* NOTE: Do not call this function directly!
- * The OV518 I2C I/O procedure is different, hence, this function.
- * This is normally only called from i2c_r(). Note that this function
- * always succeeds regardless of whether the sensor is present and working.
- */
-static int
-ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
-{
-	int rc, value;
-
-	/* Select camera register */
-	rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
-	if (rc < 0)
-		return rc;
-
-	/* Initiate 2-byte write cycle */
-	rc = reg_w(ov, R518_I2C_CTL, 0x03);
-	if (rc < 0)
-		return rc;
-
-	/* Initiate 2-byte read cycle */
-	rc = reg_w(ov, R518_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
-
-	value = reg_r(ov, R51x_I2C_DATA);
-
-	PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
-	return value;
-}
-
-/* NOTE: Do not call this function directly!
- * returns: negative is error, pos or zero is data */
-static int
-ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
-{
-	int rc, value, retries;
-
-	/* Two byte write cycle */
-	for (retries = OV511_I2C_RETRIES; ; ) {
-		/* Select camera register */
-		rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
-		if (rc < 0)
-			return rc;
-
-		/* Initiate 2-byte write cycle */
-		rc = reg_w(ov, R511_I2C_CTL, 0x03);
-		if (rc < 0)
-			return rc;
-
-		/* Retry until idle */
-		do {
-			rc = reg_r(ov, R511_I2C_CTL);
-		} while (rc > 0 && ((rc & 1) == 0));
-		if (rc < 0)
-			return rc;
-
-		if ((rc&2) == 0) /* Ack? */
-			break;
-
-		/* I2C abort */
-		reg_w(ov, R511_I2C_CTL, 0x10);
-
-		if (--retries < 0) {
-			err("i2c write retries exhausted");
-			return -1;
-		}
-	}
-
-	/* Two byte read cycle */
-	for (retries = OV511_I2C_RETRIES; ; ) {
-		/* Initiate 2-byte read cycle */
-		rc = reg_w(ov, R511_I2C_CTL, 0x05);
-		if (rc < 0)
-			return rc;
-
-		/* Retry until idle */
-		do {
-			rc = reg_r(ov, R511_I2C_CTL);
-		} while (rc > 0 && ((rc&1) == 0));
-		if (rc < 0)
-			return rc;
-
-		if ((rc&2) == 0) /* Ack? */
-			break;
-
-		/* I2C abort */
-		rc = reg_w(ov, R511_I2C_CTL, 0x10);
-		if (rc < 0)
-			return rc;
-
-		if (--retries < 0) {
-			err("i2c read retries exhausted");
-			return -1;
-		}
-	}
-
-	value = reg_r(ov, R51x_I2C_DATA);
-
-	PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
-	/* This is needed to make i2c_w() work */
-	rc = reg_w(ov, R511_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
-
-	return value;
-}
-
-/* returns: negative is error, pos or zero is data */
-static int
-i2c_r(struct usb_ov511 *ov, unsigned char reg)
-{
-	int rc;
-
-	mutex_lock(&ov->i2c_lock);
-
-	if (ov->bclass == BCL_OV518)
-		rc = ov518_i2c_read_internal(ov, reg);
-	else
-		rc = ov511_i2c_read_internal(ov, reg);
-
-	mutex_unlock(&ov->i2c_lock);
-
-	return rc;
-}
-
-static int
-i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
-{
-	int rc;
-
-	mutex_lock(&ov->i2c_lock);
-
-	if (ov->bclass == BCL_OV518)
-		rc = ov518_i2c_write_internal(ov, reg, value);
-	else
-		rc = ov511_i2c_write_internal(ov, reg, value);
-
-	mutex_unlock(&ov->i2c_lock);
-
-	return rc;
-}
-
-/* Do not call this function directly! */
-static int
-ov51x_i2c_write_mask_internal(struct usb_ov511 *ov,
-			      unsigned char reg,
-			      unsigned char value,
-			      unsigned char mask)
-{
-	int rc;
-	unsigned char oldval, newval;
-
-	if (mask == 0xff) {
-		newval = value;
-	} else {
-		if (ov->bclass == BCL_OV518)
-			rc = ov518_i2c_read_internal(ov, reg);
-		else
-			rc = ov511_i2c_read_internal(ov, reg);
-		if (rc < 0)
-			return rc;
-
-		oldval = (unsigned char) rc;
-		oldval &= (~mask);		/* Clear the masked bits */
-		value &= mask;			/* Enforce mask on value */
-		newval = oldval | value;	/* Set the desired bits */
-	}
-
-	if (ov->bclass == BCL_OV518)
-		return (ov518_i2c_write_internal(ov, reg, newval));
-	else
-		return (ov511_i2c_write_internal(ov, reg, newval));
-}
-
-/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-static int
-i2c_w_mask(struct usb_ov511 *ov,
-	   unsigned char reg,
-	   unsigned char value,
-	   unsigned char mask)
-{
-	int rc;
-
-	mutex_lock(&ov->i2c_lock);
-	rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
-	mutex_unlock(&ov->i2c_lock);
-
-	return rc;
-}
-
-/* Set the read and write slave IDs. The "slave" argument is the write slave,
- * and the read slave will be set to (slave + 1). ov->i2c_lock should be held
- * when calling this. This should not be called from outside the i2c I/O
- * functions.
- */
-static int
-i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave)
-{
-	int rc;
-
-	rc = reg_w(ov, R51x_I2C_W_SID, slave);
-	if (rc < 0)
-		return rc;
-
-	rc = reg_w(ov, R51x_I2C_R_SID, slave + 1);
-	if (rc < 0)
-		return rc;
-
-	return 0;
-}
-
-/* Write to a specific I2C slave ID and register, using the specified mask */
-static int
-i2c_w_slave(struct usb_ov511 *ov,
-	    unsigned char slave,
-	    unsigned char reg,
-	    unsigned char value,
-	    unsigned char mask)
-{
-	int rc = 0;
-
-	mutex_lock(&ov->i2c_lock);
-
-	/* Set new slave IDs */
-	rc = i2c_set_slave_internal(ov, slave);
-	if (rc < 0)
-		goto out;
-
-	rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
-
-out:
-	/* Restore primary IDs */
-	if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
-		err("Couldn't restore primary I2C slave");
-
-	mutex_unlock(&ov->i2c_lock);
-	return rc;
-}
-
-/* Read from a specific I2C slave ID and register */
-static int
-i2c_r_slave(struct usb_ov511 *ov,
-	    unsigned char slave,
-	    unsigned char reg)
-{
-	int rc;
-
-	mutex_lock(&ov->i2c_lock);
-
-	/* Set new slave IDs */
-	rc = i2c_set_slave_internal(ov, slave);
-	if (rc < 0)
-		goto out;
-
-	if (ov->bclass == BCL_OV518)
-		rc = ov518_i2c_read_internal(ov, reg);
-	else
-		rc = ov511_i2c_read_internal(ov, reg);
-
-out:
-	/* Restore primary IDs */
-	if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
-		err("Couldn't restore primary I2C slave");
-
-	mutex_unlock(&ov->i2c_lock);
-	return rc;
-}
-
-/* Sets I2C read and write slave IDs. Returns <0 for error */
-static int
-ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
-{
-	int rc;
-
-	mutex_lock(&ov->i2c_lock);
-
-	rc = i2c_set_slave_internal(ov, sid);
-	if (rc < 0)
-		goto out;
-
-	// FIXME: Is this actually necessary?
-	rc = ov51x_reset(ov, OV511_RESET_NOREGS);
-out:
-	mutex_unlock(&ov->i2c_lock);
-	return rc;
-}
-
-static int
-write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals)
-{
-	int rc;
-
-	while (pRegvals->bus != OV511_DONE_BUS) {
-		if (pRegvals->bus == OV511_REG_BUS) {
-			if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0)
-				return rc;
-		} else if (pRegvals->bus == OV511_I2C_BUS) {
-			if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0)
-				return rc;
-		} else {
-			err("Bad regval array");
-			return -1;
-		}
-		pRegvals++;
-	}
-	return 0;
-}
-
-#ifdef OV511_DEBUG
-static void
-dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn)
-{
-	int i, rc;
-
-	for (i = reg1; i <= regn; i++) {
-		rc = i2c_r(ov, i);
-		dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc);
-	}
-}
-
-static void
-dump_i2c_regs(struct usb_ov511 *ov)
-{
-	dev_info(&ov->dev->dev, "I2C REGS\n");
-	dump_i2c_range(ov, 0x00, 0x7C);
-}
-
-static void
-dump_reg_range(struct usb_ov511 *ov, int reg1, int regn)
-{
-	int i, rc;
-
-	for (i = reg1; i <= regn; i++) {
-		rc = reg_r(ov, i);
-		dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc);
-	}
-}
-
-static void
-ov511_dump_regs(struct usb_ov511 *ov)
-{
-	dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n");
-	dump_reg_range(ov, 0x10, 0x1f);
-	dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n");
-	dump_reg_range(ov, 0x20, 0x23);
-	dev_info(&ov->dev->dev, "ISO FIFO REGS\n");
-	dump_reg_range(ov, 0x30, 0x31);
-	dev_info(&ov->dev->dev, "PIO REGS\n");
-	dump_reg_range(ov, 0x38, 0x39);
-	dump_reg_range(ov, 0x3e, 0x3e);
-	dev_info(&ov->dev->dev, "I2C REGS\n");
-	dump_reg_range(ov, 0x40, 0x49);
-	dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n");
-	dump_reg_range(ov, 0x50, 0x55);
-	dump_reg_range(ov, 0x5e, 0x5f);
-	dev_info(&ov->dev->dev, "OmniCE REGS\n");
-	dump_reg_range(ov, 0x70, 0x79);
-	/* NOTE: Quantization tables are not readable. You will get the value
-	 * in reg. 0x79 for every table register */
-	dump_reg_range(ov, 0x80, 0x9f);
-	dump_reg_range(ov, 0xa0, 0xbf);
-
-}
-
-static void
-ov518_dump_regs(struct usb_ov511 *ov)
-{
-	dev_info(&ov->dev->dev, "VIDEO MODE REGS\n");
-	dump_reg_range(ov, 0x20, 0x2f);
-	dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n");
-	dump_reg_range(ov, 0x30, 0x3f);
-	dev_info(&ov->dev->dev, "I2C REGS\n");
-	dump_reg_range(ov, 0x40, 0x4f);
-	dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n");
-	dump_reg_range(ov, 0x50, 0x5f);
-	dev_info(&ov->dev->dev, "60 - 6F\n");
-	dump_reg_range(ov, 0x60, 0x6f);
-	dev_info(&ov->dev->dev, "70 - 7F\n");
-	dump_reg_range(ov, 0x70, 0x7f);
-	dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n");
-	dump_reg_range(ov, 0x80, 0x8f);
-	dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n");
-	dump_reg_range(ov, 0x90, 0x9f);
-	dev_info(&ov->dev->dev, "A0 - BF\n");
-	dump_reg_range(ov, 0xa0, 0xbf);
-	dev_info(&ov->dev->dev, "CBR\n");
-	dump_reg_range(ov, 0xc0, 0xcf);
-}
-#endif
-
-/*****************************************************************************/
-
-/* Temporarily stops OV511 from functioning. Must do this before changing
- * registers while the camera is streaming */
-static inline int
-ov51x_stop(struct usb_ov511 *ov)
-{
-	PDEBUG(4, "stopping");
-	ov->stopped = 1;
-	if (ov->bclass == BCL_OV518)
-		return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a));
-	else
-		return (reg_w(ov, R51x_SYS_RESET, 0x3d));
-}
-
-/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
- * actually stopped (for performance). */
-static inline int
-ov51x_restart(struct usb_ov511 *ov)
-{
-	if (ov->stopped) {
-		PDEBUG(4, "restarting");
-		ov->stopped = 0;
-
-		/* Reinitialize the stream */
-		if (ov->bclass == BCL_OV518)
-			reg_w(ov, 0x2f, 0x80);
-
-		return (reg_w(ov, R51x_SYS_RESET, 0x00));
-	}
-
-	return 0;
-}
-
-/* Sleeps until no frames are active. Returns !0 if got signal */
-static int
-ov51x_wait_frames_inactive(struct usb_ov511 *ov)
-{
-	return wait_event_interruptible(ov->wq, ov->curframe < 0);
-}
-
-/* Resets the hardware snapshot button */
-static void
-ov51x_clear_snapshot(struct usb_ov511 *ov)
-{
-	if (ov->bclass == BCL_OV511) {
-		reg_w(ov, R51x_SYS_SNAP, 0x00);
-		reg_w(ov, R51x_SYS_SNAP, 0x02);
-		reg_w(ov, R51x_SYS_SNAP, 0x00);
-	} else if (ov->bclass == BCL_OV518) {
-		dev_warn(&ov->dev->dev,
-			 "snapshot reset not supported yet on OV518(+)\n");
-	} else {
-		dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
-	}
-}
-
-#if 0
-/* Checks the status of the snapshot button. Returns 1 if it was pressed since
- * it was last cleared, and zero in all other cases (including errors) */
-static int
-ov51x_check_snapshot(struct usb_ov511 *ov)
-{
-	int ret, status = 0;
-
-	if (ov->bclass == BCL_OV511) {
-		ret = reg_r(ov, R51x_SYS_SNAP);
-		if (ret < 0) {
-			dev_err(&ov->dev->dev,
-				"Error checking snspshot status (%d)\n", ret);
-		} else if (ret & 0x08) {
-			status = 1;
-		}
-	} else if (ov->bclass == BCL_OV518) {
-		dev_warn(&ov->dev->dev,
-			 "snapshot check not supported yet on OV518(+)\n");
-	} else {
-		dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
-	}
-
-	return status;
-}
-#endif
-
-/* This does an initial reset of an OmniVision sensor and ensures that I2C
- * is synchronized. Returns <0 for failure.
- */
-static int
-init_ov_sensor(struct usb_ov511 *ov)
-{
-	int i, success;
-
-	/* Reset the sensor */
-	if (i2c_w(ov, 0x12, 0x80) < 0)
-		return -EIO;
-
-	/* Wait for it to initialize */
-	msleep(150);
-
-	for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) {
-		if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
-		    (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
-			success = 1;
-			continue;
-		}
-
-		/* Reset the sensor */
-		if (i2c_w(ov, 0x12, 0x80) < 0)
-			return -EIO;
-		/* Wait for it to initialize */
-		msleep(150);
-		/* Dummy read to sync I2C */
-		if (i2c_r(ov, 0x00) < 0)
-			return -EIO;
-	}
-
-	if (!success)
-		return -EIO;
-
-	PDEBUG(1, "I2C synced in %d attempt(s)", i);
-
-	return 0;
-}
-
-static int
-ov511_set_packet_size(struct usb_ov511 *ov, int size)
-{
-	int alt, mult;
-
-	if (ov51x_stop(ov) < 0)
-		return -EIO;
-
-	mult = size >> 5;
-
-	if (ov->bridge == BRG_OV511) {
-		if (size == 0)
-			alt = OV511_ALT_SIZE_0;
-		else if (size == 257)
-			alt = OV511_ALT_SIZE_257;
-		else if (size == 513)
-			alt = OV511_ALT_SIZE_513;
-		else if (size == 769)
-			alt = OV511_ALT_SIZE_769;
-		else if (size == 993)
-			alt = OV511_ALT_SIZE_993;
-		else {
-			err("Set packet size: invalid size (%d)", size);
-			return -EINVAL;
-		}
-	} else if (ov->bridge == BRG_OV511PLUS) {
-		if (size == 0)
-			alt = OV511PLUS_ALT_SIZE_0;
-		else if (size == 33)
-			alt = OV511PLUS_ALT_SIZE_33;
-		else if (size == 129)
-			alt = OV511PLUS_ALT_SIZE_129;
-		else if (size == 257)
-			alt = OV511PLUS_ALT_SIZE_257;
-		else if (size == 385)
-			alt = OV511PLUS_ALT_SIZE_385;
-		else if (size == 513)
-			alt = OV511PLUS_ALT_SIZE_513;
-		else if (size == 769)
-			alt = OV511PLUS_ALT_SIZE_769;
-		else if (size == 961)
-			alt = OV511PLUS_ALT_SIZE_961;
-		else {
-			err("Set packet size: invalid size (%d)", size);
-			return -EINVAL;
-		}
-	} else {
-		err("Set packet size: Invalid bridge type");
-		return -EINVAL;
-	}
-
-	PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt);
-
-	if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0)
-		return -EIO;
-
-	if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
-		err("Set packet size: set interface error");
-		return -EBUSY;
-	}
-
-	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
-		return -EIO;
-
-	ov->packet_size = size;
-
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return 0;
-}
-
-/* Note: Unlike the OV511/OV511+, the size argument does NOT include the
- * optional packet number byte. The actual size *is* stored in ov->packet_size,
- * though. */
-static int
-ov518_set_packet_size(struct usb_ov511 *ov, int size)
-{
-	int alt;
-
-	if (ov51x_stop(ov) < 0)
-		return -EIO;
-
-	if (ov->bclass == BCL_OV518) {
-		if (size == 0)
-			alt = OV518_ALT_SIZE_0;
-		else if (size == 128)
-			alt = OV518_ALT_SIZE_128;
-		else if (size == 256)
-			alt = OV518_ALT_SIZE_256;
-		else if (size == 384)
-			alt = OV518_ALT_SIZE_384;
-		else if (size == 512)
-			alt = OV518_ALT_SIZE_512;
-		else if (size == 640)
-			alt = OV518_ALT_SIZE_640;
-		else if (size == 768)
-			alt = OV518_ALT_SIZE_768;
-		else if (size == 896)
-			alt = OV518_ALT_SIZE_896;
-		else {
-			err("Set packet size: invalid size (%d)", size);
-			return -EINVAL;
-		}
-	} else {
-		err("Set packet size: Invalid bridge type");
-		return -EINVAL;
-	}
-
-	PDEBUG(3, "%d, alt=%d", size, alt);
-
-	ov->packet_size = size;
-	if (size > 0) {
-		/* Program ISO FIFO size reg (packet number isn't included) */
-		ov518_reg_w32(ov, 0x30, size, 2);
-
-		if (ov->packet_numbering)
-			++ov->packet_size;
-	}
-
-	if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
-		err("Set packet size: set interface error");
-		return -EBUSY;
-	}
-
-	/* Initialize the stream */
-	if (reg_w(ov, 0x2f, 0x80) < 0)
-		return -EIO;
-
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
-		return -EIO;
-
-	return 0;
-}
-
-/* Upload compression params and quantization tables. Returns 0 for success. */
-static int
-ov511_init_compression(struct usb_ov511 *ov)
-{
-	int rc = 0;
-
-	if (!ov->compress_inited) {
-		reg_w(ov, 0x70, phy);
-		reg_w(ov, 0x71, phuv);
-		reg_w(ov, 0x72, pvy);
-		reg_w(ov, 0x73, pvuv);
-		reg_w(ov, 0x74, qhy);
-		reg_w(ov, 0x75, qhuv);
-		reg_w(ov, 0x76, qvy);
-		reg_w(ov, 0x77, qvuv);
-
-		if (ov511_upload_quan_tables(ov) < 0) {
-			err("Error uploading quantization tables");
-			rc = -EIO;
-			goto out;
-		}
-	}
-
-	ov->compress_inited = 1;
-out:
-	return rc;
-}
-
-/* Upload compression params and quantization tables. Returns 0 for success. */
-static int
-ov518_init_compression(struct usb_ov511 *ov)
-{
-	int rc = 0;
-
-	if (!ov->compress_inited) {
-		if (ov518_upload_quan_tables(ov) < 0) {
-			err("Error uploading quantization tables");
-			rc = -EIO;
-			goto out;
-		}
-	}
-
-	ov->compress_inited = 1;
-out:
-	return rc;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's contrast setting to "val" */
-static int
-sensor_set_contrast(struct usb_ov511 *ov, unsigned short val)
-{
-	int rc;
-
-	PDEBUG(3, "%d", val);
-
-	if (ov->stop_during_set)
-		if (ov51x_stop(ov) < 0)
-			return -EIO;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV6620:
-	{
-		rc = i2c_w(ov, OV7610_REG_CNT, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	}
-	case SEN_OV6630:
-	{
-		rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f);
-		if (rc < 0)
-			goto out;
-		break;
-	}
-	case SEN_OV7620:
-	{
-		unsigned char ctab[] = {
-			0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
-			0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
-		};
-
-		/* Use Y gamma control instead. Bit 0 enables it. */
-		rc = i2c_w(ov, 0x64, ctab[val>>12]);
-		if (rc < 0)
-			goto out;
-		break;
-	}
-	case SEN_SAA7111A:
-	{
-		rc = i2c_w(ov, 0x0b, val >> 9);
-		if (rc < 0)
-			goto out;
-		break;
-	}
-	default:
-	{
-		PDEBUG(3, "Unsupported with this sensor");
-		rc = -EPERM;
-		goto out;
-	}
-	}
-
-	rc = 0;		/* Success */
-	ov->contrast = val;
-out:
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return rc;
-}
-
-/* Gets sensor's contrast setting */
-static int
-sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val)
-{
-	int rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV6620:
-		rc = i2c_r(ov, OV7610_REG_CNT);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_OV6630:
-		rc = i2c_r(ov, OV7610_REG_CNT);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 12;
-		break;
-	case SEN_OV7620:
-		/* Use Y gamma reg instead. Bit 0 is the enable bit. */
-		rc = i2c_r(ov, 0x64);
-		if (rc < 0)
-			return rc;
-		else
-			*val = (rc & 0xfe) << 8;
-		break;
-	case SEN_SAA7111A:
-		*val = ov->contrast;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	PDEBUG(3, "%d", *val);
-	ov->contrast = *val;
-
-	return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's brightness setting to "val" */
-static int
-sensor_set_brightness(struct usb_ov511 *ov, unsigned short val)
-{
-	int rc;
-
-	PDEBUG(4, "%d", val);
-
-	if (ov->stop_during_set)
-		if (ov51x_stop(ov) < 0)
-			return -EIO;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV76BE:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	case SEN_OV7620:
-		/* 7620 doesn't like manual changes when in auto mode */
-		if (!ov->auto_brt) {
-			rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
-			if (rc < 0)
-				goto out;
-		}
-		break;
-	case SEN_SAA7111A:
-		rc = i2c_w(ov, 0x0a, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		rc = -EPERM;
-		goto out;
-	}
-
-	rc = 0;		/* Success */
-	ov->brightness = val;
-out:
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return rc;
-}
-
-/* Gets sensor's brightness setting */
-static int
-sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val)
-{
-	int rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV76BE:
-	case SEN_OV7620:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_r(ov, OV7610_REG_BRT);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_SAA7111A:
-		*val = ov->brightness;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	PDEBUG(3, "%d", *val);
-	ov->brightness = *val;
-
-	return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's saturation (color intensity) setting to "val" */
-static int
-sensor_set_saturation(struct usb_ov511 *ov, unsigned short val)
-{
-	int rc;
-
-	PDEBUG(3, "%d", val);
-
-	if (ov->stop_during_set)
-		if (ov51x_stop(ov) < 0)
-			return -EIO;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV76BE:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	case SEN_OV7620:
-//		/* Use UV gamma control instead. Bits 0 & 7 are reserved. */
-//		rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e);
-//		if (rc < 0)
-//			goto out;
-		rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	case SEN_SAA7111A:
-		rc = i2c_w(ov, 0x0c, val >> 9);
-		if (rc < 0)
-			goto out;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		rc = -EPERM;
-		goto out;
-	}
-
-	rc = 0;		/* Success */
-	ov->colour = val;
-out:
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return rc;
-}
-
-/* Gets sensor's saturation (color intensity) setting */
-static int
-sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val)
-{
-	int rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV76BE:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_r(ov, OV7610_REG_SAT);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_OV7620:
-//		/* Use UV gamma reg instead. Bits 0 & 7 are reserved. */
-//		rc = i2c_r(ov, 0x62);
-//		if (rc < 0)
-//			return rc;
-//		else
-//			*val = (rc & 0x7e) << 9;
-		rc = i2c_r(ov, OV7610_REG_SAT);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_SAA7111A:
-		*val = ov->colour;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	PDEBUG(3, "%d", *val);
-	ov->colour = *val;
-
-	return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's hue (red/blue balance) setting to "val" */
-static int
-sensor_set_hue(struct usb_ov511 *ov, unsigned short val)
-{
-	int rc;
-
-	PDEBUG(3, "%d", val);
-
-	if (ov->stop_during_set)
-		if (ov51x_stop(ov) < 0)
-			return -EIO;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	case SEN_OV7620:
-// Hue control is causing problems. I will enable it once it's fixed.
-#if 0
-		rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb);
-		if (rc < 0)
-			goto out;
-
-		rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb);
-		if (rc < 0)
-			goto out;
-#endif
-		break;
-	case SEN_SAA7111A:
-		rc = i2c_w(ov, 0x0d, (val + 32768) >> 8);
-		if (rc < 0)
-			goto out;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		rc = -EPERM;
-		goto out;
-	}
-
-	rc = 0;		/* Success */
-	ov->hue = val;
-out:
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return rc;
-}
-
-/* Gets sensor's hue (red/blue balance) setting */
-static int
-sensor_get_hue(struct usb_ov511 *ov, unsigned short *val)
-{
-	int rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = i2c_r(ov, OV7610_REG_BLUE);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_OV7620:
-		rc = i2c_r(ov, 0x7a);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc << 8;
-		break;
-	case SEN_SAA7111A:
-		*val = ov->hue;
-		break;
-	default:
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	PDEBUG(3, "%d", *val);
-	ov->hue = *val;
-
-	return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-static int
-sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p)
-{
-	int rc;
-
-	PDEBUG(4, "sensor_set_picture");
-
-	ov->whiteness = p->whiteness;
-
-	/* Don't return error if a setting is unsupported, or rest of settings
-	 * will not be performed */
-
-	rc = sensor_set_contrast(ov, p->contrast);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_brightness(ov, p->brightness);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_saturation(ov, p->colour);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_hue(ov, p->hue);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	return 0;
-}
-
-static int
-sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p)
-{
-	int rc;
-
-	PDEBUG(4, "sensor_get_picture");
-
-	/* Don't return error if a setting is unsupported, or rest of settings
-	 * will not be performed */
-
-	rc = sensor_get_contrast(ov, &(p->contrast));
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_get_brightness(ov, &(p->brightness));
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_get_saturation(ov, &(p->colour));
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_get_hue(ov, &(p->hue));
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	p->whiteness = 105 << 8;
-
-	return 0;
-}
-
-#if 0
-// FIXME: Exposure range is only 0x00-0x7f in interlace mode
-/* Sets current exposure for sensor. This only has an effect if auto-exposure
- * is off */
-static inline int
-sensor_set_exposure(struct usb_ov511 *ov, unsigned char val)
-{
-	int rc;
-
-	PDEBUG(3, "%d", val);
-
-	if (ov->stop_during_set)
-		if (ov51x_stop(ov) < 0)
-			return -EIO;
-
-	switch (ov->sensor) {
-	case SEN_OV6620:
-	case SEN_OV6630:
-	case SEN_OV7610:
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-		rc = i2c_w(ov, 0x10, val);
-		if (rc < 0)
-			goto out;
-
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for set_exposure");
-		return -EINVAL;
-	}
-
-	rc = 0;		/* Success */
-	ov->exposure = val;
-out:
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return rc;
-}
-#endif
-
-/* Gets current exposure level from sensor, regardless of whether it is under
- * manual control. */
-static int
-sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val)
-{
-	int rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV6620:
-	case SEN_OV6630:
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-		rc = i2c_r(ov, 0x10);
-		if (rc < 0)
-			return rc;
-		else
-			*val = rc;
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		val = NULL;
-		PDEBUG(3, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for get_exposure");
-		return -EINVAL;
-	}
-
-	PDEBUG(3, "%d", *val);
-	ov->exposure = *val;
-
-	return 0;
-}
-
-/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */
-static void
-ov51x_led_control(struct usb_ov511 *ov, int enable)
-{
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	if (ov->bridge == BRG_OV511PLUS)
-		reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0);
-	else if (ov->bclass == BCL_OV518)
-		reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02);
-
-	return;
-}
-
-/* Matches the sensor's internal frame rate to the lighting frequency.
- * Valid frequencies are:
- *	50 - 50Hz, for European and Asian lighting
- *	60 - 60Hz, for American lighting
- *
- * Tested with: OV7610, OV7620, OV76BE, OV6620
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_light_freq(struct usb_ov511 *ov, int freq)
-{
-	int sixty;
-
-	PDEBUG(4, "%d Hz", freq);
-
-	if (freq == 60)
-		sixty = 1;
-	else if (freq == 50)
-		sixty = 0;
-	else {
-		err("Invalid light freq (%d Hz)", freq);
-		return -EINVAL;
-	}
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-		i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
-		i2c_w(ov, 0x2b, sixty?0x00:0xac);
-		i2c_w_mask(ov, 0x13, 0x10, 0x10);
-		i2c_w_mask(ov, 0x13, 0x00, 0x10);
-		break;
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-		i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
-		i2c_w(ov, 0x2b, sixty?0x00:0xac);
-		i2c_w_mask(ov, 0x76, 0x01, 0x01);
-		break;
-	case SEN_OV6620:
-	case SEN_OV6630:
-		i2c_w(ov, 0x2b, sixty?0xa8:0x28);
-		i2c_w(ov, 0x2a, sixty?0x84:0xa4);
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for set_light_freq");
-		return -EINVAL;
-	}
-
-	ov->lightfreq = freq;
-
-	return 0;
-}
-
-/* If enable is true, turn on the sensor's banding filter, otherwise turn it
- * off. This filter tries to reduce the pattern of horizontal light/dark bands
- * caused by some (usually fluorescent) lighting. The light frequency must be
- * set either before or after enabling it with ov51x_set_light_freq().
- *
- * Tested with: OV7610, OV7620, OV76BE, OV6620.
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_banding_filter(struct usb_ov511 *ov, int enable)
-{
-	int rc;
-
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
-		|| ov->sensor == SEN_SAA7111A) {
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04);
-	if (rc < 0)
-		return rc;
-
-	ov->bandfilt = enable;
-
-	return 0;
-}
-
-/* If enable is true, turn on the sensor's auto brightness control, otherwise
- * turn it off.
- *
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_auto_brightness(struct usb_ov511 *ov, int enable)
-{
-	int rc;
-
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
-		|| ov->sensor == SEN_SAA7111A) {
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	}
-
-	rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10);
-	if (rc < 0)
-		return rc;
-
-	ov->auto_brt = enable;
-
-	return 0;
-}
-
-/* If enable is true, turn on the sensor's auto exposure control, otherwise
- * turn it off.
- *
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_auto_exposure(struct usb_ov511 *ov, int enable)
-{
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-		i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80);
-		break;
-	case SEN_OV6620:
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-		i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01);
-		break;
-	case SEN_OV6630:
-		i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10);
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for set_auto_exposure");
-		return -EINVAL;
-	}
-
-	ov->auto_exp = enable;
-
-	return 0;
-}
-
-/* Modifies the sensor's exposure algorithm to allow proper exposure of objects
- * that are illuminated from behind.
- *
- * Tested with: OV6620, OV7620
- * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_backlight(struct usb_ov511 *ov, int enable)
-{
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	switch (ov->sensor) {
-	case SEN_OV7620:
-	case SEN_OV8600:
-		i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0);
-		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
-		i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
-		break;
-	case SEN_OV6620:
-		i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0);
-		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
-		i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80);
-		break;
-	case SEN_OV6630:
-		i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0);
-		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
-		i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
-		break;
-	case SEN_OV7610:
-	case SEN_OV76BE:
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for set_backlight");
-		return -EINVAL;
-	}
-
-	ov->backlight = enable;
-
-	return 0;
-}
-
-static int
-sensor_set_mirror(struct usb_ov511 *ov, int enable)
-{
-	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
-	switch (ov->sensor) {
-	case SEN_OV6620:
-	case SEN_OV6630:
-	case SEN_OV7610:
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-		i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40);
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-	case SEN_SAA7111A:
-		PDEBUG(5, "Unsupported with this sensor");
-		return -EPERM;
-	default:
-		err("Sensor not supported for set_mirror");
-		return -EINVAL;
-	}
-
-	ov->mirror = enable;
-
-	return 0;
-}
-
-/* Returns number of bits per pixel (regardless of where they are located;
- * planar or not), or zero for unsupported format.
- */
-static inline int
-get_depth(int palette)
-{
-	switch (palette) {
-	case VIDEO_PALETTE_GREY:    return 8;
-	case VIDEO_PALETTE_YUV420:  return 12;
-	case VIDEO_PALETTE_YUV420P: return 12; /* Planar */
-	default:		    return 0;  /* Invalid format */
-	}
-}
-
-/* Bytes per frame. Used by read(). Return of 0 indicates error */
-static inline long int
-get_frame_length(struct ov511_frame *frame)
-{
-	if (!frame)
-		return 0;
-	else
-		return ((frame->width * frame->height
-			 * get_depth(frame->format)) >> 3);
-}
-
-static int
-mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height,
-			 int mode, int sub_flag, int qvga)
-{
-	int clock;
-
-	/******** Mode (VGA/QVGA) and sensor specific regs ********/
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-		i2c_w(ov, 0x14, qvga?0x24:0x04);
-// FIXME: Does this improve the image quality or frame rate?
-#if 0
-		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
-		i2c_w(ov, 0x24, 0x10);
-		i2c_w(ov, 0x25, qvga?0x40:0x8a);
-		i2c_w(ov, 0x2f, qvga?0x30:0xb0);
-		i2c_w(ov, 0x35, qvga?0x1c:0x9c);
-#endif
-		break;
-	case SEN_OV7620:
-//		i2c_w(ov, 0x2b, 0x00);
-		i2c_w(ov, 0x14, qvga?0xa4:0x84);
-		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
-		i2c_w(ov, 0x24, qvga?0x20:0x3a);
-		i2c_w(ov, 0x25, qvga?0x30:0x60);
-		i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
-		i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0);
-		i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
-		break;
-	case SEN_OV76BE:
-//		i2c_w(ov, 0x2b, 0x00);
-		i2c_w(ov, 0x14, qvga?0xa4:0x84);
-// FIXME: Enable this once 7620AE uses 7620 initial settings
-#if 0
-		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
-		i2c_w(ov, 0x24, qvga?0x20:0x3a);
-		i2c_w(ov, 0x25, qvga?0x30:0x60);
-		i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
-		i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0);
-		i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
-#endif
-		break;
-	case SEN_OV6620:
-		i2c_w(ov, 0x14, qvga?0x24:0x04);
-		break;
-	case SEN_OV6630:
-		i2c_w(ov, 0x14, qvga?0xa0:0x80);
-		break;
-	default:
-		err("Invalid sensor");
-		return -EINVAL;
-	}
-
-	/******** Palette-specific regs ********/
-
-	if (mode == VIDEO_PALETTE_GREY) {
-		if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
-			/* these aren't valid on the OV6620/OV7620/6630? */
-			i2c_w_mask(ov, 0x0e, 0x40, 0x40);
-		}
-
-		if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
-		    && ov518_color) {
-			i2c_w_mask(ov, 0x12, 0x00, 0x10);
-			i2c_w_mask(ov, 0x13, 0x00, 0x20);
-		} else {
-			i2c_w_mask(ov, 0x13, 0x20, 0x20);
-		}
-	} else {
-		if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
-			/* not valid on the OV6620/OV7620/6630? */
-			i2c_w_mask(ov, 0x0e, 0x00, 0x40);
-		}
-
-		/* The OV518 needs special treatment. Although both the OV518
-		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
-		 * bus is actually used. The UV bus is tied to ground.
-		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
-		 * output mode */
-
-		if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
-		    && ov518_color) {
-			i2c_w_mask(ov, 0x12, 0x10, 0x10);
-			i2c_w_mask(ov, 0x13, 0x20, 0x20);
-		} else {
-			i2c_w_mask(ov, 0x13, 0x00, 0x20);
-		}
-	}
-
-	/******** Clock programming ********/
-
-	/* The OV6620 needs special handling. This prevents the
-	 * severe banding that normally occurs */
-	if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630)
-	{
-		/* Clock down */
-
-		i2c_w(ov, 0x2a, 0x04);
-
-		if (ov->compress) {
-//			clock = 0;    /* This ensures the highest frame rate */
-			clock = 3;
-		} else if (clockdiv == -1) {   /* If user didn't override it */
-			clock = 3;    /* Gives better exposure time */
-		} else {
-			clock = clockdiv;
-		}
-
-		PDEBUG(4, "Setting clock divisor to %d", clock);
-
-		i2c_w(ov, 0x11, clock);
-
-		i2c_w(ov, 0x2a, 0x84);
-		/* This next setting is critical. It seems to improve
-		 * the gain or the contrast. The "reserved" bits seem
-		 * to have some effect in this case. */
-		i2c_w(ov, 0x2d, 0x85);
-	}
-	else
-	{
-		if (ov->compress) {
-			clock = 1;    /* This ensures the highest frame rate */
-		} else if (clockdiv == -1) {   /* If user didn't override it */
-			/* Calculate and set the clock divisor */
-			clock = ((sub_flag ? ov->subw * ov->subh
-				  : width * height)
-				 * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2)
-				 / 66000;
-		} else {
-			clock = clockdiv;
-		}
-
-		PDEBUG(4, "Setting clock divisor to %d", clock);
-
-		i2c_w(ov, 0x11, clock);
-	}
-
-	/******** Special Features ********/
-
-	if (framedrop >= 0)
-		i2c_w(ov, 0x16, framedrop);
-
-	/* Test Pattern */
-	i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02);
-
-	/* Enable auto white balance */
-	i2c_w_mask(ov, 0x12, 0x04, 0x04);
-
-	// This will go away as soon as ov51x_mode_init_sensor_regs()
-	// is fully tested.
-	/* 7620/6620/6630? don't have register 0x35, so play it safe */
-	if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
-		if (width == 640 && height == 480)
-			i2c_w(ov, 0x35, 0x9e);
-		else
-			i2c_w(ov, 0x35, 0x1e);
-	}
-
-	return 0;
-}
-
-static int
-set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode,
-		     int sub_flag)
-{
-	int ret;
-	int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize;
-	int hoffset, voffset, hwscale = 0, vwscale = 0;
-
-	/* The different sensor ICs handle setting up of window differently.
-	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV76BE:
-		hwsbase = 0x38;
-		hwebase = 0x3a;
-		vwsbase = vwebase = 0x05;
-		break;
-	case SEN_OV6620:
-	case SEN_OV6630:
-		hwsbase = 0x38;
-		hwebase = 0x3a;
-		vwsbase = 0x05;
-		vwebase = 0x06;
-		break;
-	case SEN_OV7620:
-		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
-		hwebase = 0x2f;
-		vwsbase = vwebase = 0x05;
-		break;
-	default:
-		err("Invalid sensor");
-		return -EINVAL;
-	}
-
-	if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) {
-		/* Note: OV518(+) does downsample on its own) */
-		if ((width > 176 && height > 144)
-		    || ov->bclass == BCL_OV518) {  /* CIF */
-			ret = mode_init_ov_sensor_regs(ov, width, height,
-				mode, sub_flag, 0);
-			if (ret < 0)
-				return ret;
-			hwscale = 1;
-			vwscale = 1;  /* The datasheet says 0; it's wrong */
-			hwsize = 352;
-			vwsize = 288;
-		} else if (width > 176 || height > 144) {
-			err("Illegal dimensions");
-			return -EINVAL;
-		} else {			    /* QCIF */
-			ret = mode_init_ov_sensor_regs(ov, width, height,
-				mode, sub_flag, 1);
-			if (ret < 0)
-				return ret;
-			hwsize = 176;
-			vwsize = 144;
-		}
-	} else {
-		if (width > 320 && height > 240) {  /* VGA */
-			ret = mode_init_ov_sensor_regs(ov, width, height,
-				mode, sub_flag, 0);
-			if (ret < 0)
-				return ret;
-			hwscale = 2;
-			vwscale = 1;
-			hwsize = 640;
-			vwsize = 480;
-		} else if (width > 320 || height > 240) {
-			err("Illegal dimensions");
-			return -EINVAL;
-		} else {			    /* QVGA */
-			ret = mode_init_ov_sensor_regs(ov, width, height,
-				mode, sub_flag, 1);
-			if (ret < 0)
-				return ret;
-			hwscale = 1;
-			hwsize = 320;
-			vwsize = 240;
-		}
-	}
-
-	/* Center the window */
-	hoffset = ((hwsize - width) / 2) >> hwscale;
-	voffset = ((vwsize - height) / 2) >> vwscale;
-
-	/* FIXME! - This needs to be changed to support 160x120 and 6620!!! */
-	if (sub_flag) {
-		i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale));
-		i2c_w(ov, 0x18,	hwebase+((ov->subx+ov->subw)>>hwscale));
-		i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale));
-		i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale));
-	} else {
-		i2c_w(ov, 0x17, hwsbase + hoffset);
-		i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale));
-		i2c_w(ov, 0x19, vwsbase + voffset);
-		i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale));
-	}
-
-#ifdef OV511_DEBUG
-	if (dump_sensor)
-		dump_i2c_regs(ov);
-#endif
-
-	return 0;
-}
-
-/* Set up the OV511/OV511+ with the given image parameters.
- *
- * Do not put any sensor-specific code in here (including I2C I/O functions)
- */
-static int
-ov511_mode_init_regs(struct usb_ov511 *ov,
-		     int width, int height, int mode, int sub_flag)
-{
-	int hsegs, vsegs;
-
-	if (sub_flag) {
-		width = ov->subw;
-		height = ov->subh;
-	}
-
-	PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
-	       width, height, mode, sub_flag);
-
-	// FIXME: This should be moved to a 7111a-specific function once
-	// subcapture is dealt with properly
-	if (ov->sensor == SEN_SAA7111A) {
-		if (width == 320 && height == 240) {
-			/* No need to do anything special */
-		} else if (width == 640 && height == 480) {
-			/* Set the OV511 up as 320x480, but keep the
-			 * V4L resolution as 640x480 */
-			width = 320;
-		} else {
-			err("SAA7111A only allows 320x240 or 640x480");
-			return -EINVAL;
-		}
-	}
-
-	/* Make sure width and height are a multiple of 8 */
-	if (width % 8 || height % 8) {
-		err("Invalid size (%d, %d) (mode = %d)", width, height, mode);
-		return -EINVAL;
-	}
-
-	if (width < ov->minwidth || height < ov->minheight) {
-		err("Requested dimensions are too small");
-		return -EINVAL;
-	}
-
-	if (ov51x_stop(ov) < 0)
-		return -EIO;
-
-	if (mode == VIDEO_PALETTE_GREY) {
-		reg_w(ov, R511_CAM_UV_EN, 0x00);
-		reg_w(ov, R511_SNAP_UV_EN, 0x00);
-		reg_w(ov, R511_SNAP_OPTS, 0x01);
-	} else {
-		reg_w(ov, R511_CAM_UV_EN, 0x01);
-		reg_w(ov, R511_SNAP_UV_EN, 0x01);
-		reg_w(ov, R511_SNAP_OPTS, 0x03);
-	}
-
-	/* Here I'm assuming that snapshot size == image size.
-	 * I hope that's always true. --claudio
-	 */
-	hsegs = (width >> 3) - 1;
-	vsegs = (height >> 3) - 1;
-
-	reg_w(ov, R511_CAM_PXCNT, hsegs);
-	reg_w(ov, R511_CAM_LNCNT, vsegs);
-	reg_w(ov, R511_CAM_PXDIV, 0x00);
-	reg_w(ov, R511_CAM_LNDIV, 0x00);
-
-	/* YUV420, low pass filter on */
-	reg_w(ov, R511_CAM_OPTS, 0x03);
-
-	/* Snapshot additions */
-	reg_w(ov, R511_SNAP_PXCNT, hsegs);
-	reg_w(ov, R511_SNAP_LNCNT, vsegs);
-	reg_w(ov, R511_SNAP_PXDIV, 0x00);
-	reg_w(ov, R511_SNAP_LNDIV, 0x00);
-
-	if (ov->compress) {
-		/* Enable Y and UV quantization and compression */
-		reg_w(ov, R511_COMP_EN, 0x07);
-		reg_w(ov, R511_COMP_LUT_EN, 0x03);
-		ov51x_reset(ov, OV511_RESET_OMNICE);
-	}
-
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	return 0;
-}
-
-/* Sets up the OV518/OV518+ with the given image parameters
- *
- * OV518 needs a completely different approach, until we can figure out what
- * the individual registers do. Also, only 15 FPS is supported now.
- *
- * Do not put any sensor-specific code in here (including I2C I/O functions)
- */
-static int
-ov518_mode_init_regs(struct usb_ov511 *ov,
-		     int width, int height, int mode, int sub_flag)
-{
-	int hsegs, vsegs, hi_res;
-
-	if (sub_flag) {
-		width = ov->subw;
-		height = ov->subh;
-	}
-
-	PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
-	       width, height, mode, sub_flag);
-
-	if (width % 16 || height % 8) {
-		err("Invalid size (%d, %d)", width, height);
-		return -EINVAL;
-	}
-
-	if (width < ov->minwidth || height < ov->minheight) {
-		err("Requested dimensions are too small");
-		return -EINVAL;
-	}
-
-	if (width >= 320 && height >= 240) {
-		hi_res = 1;
-	} else if (width >= 320 || height >= 240) {
-		err("Invalid width/height combination (%d, %d)", width, height);
-		return -EINVAL;
-	} else {
-		hi_res = 0;
-	}
-
-	if (ov51x_stop(ov) < 0)
-		return -EIO;
-
-	/******** Set the mode ********/
-
-	reg_w(ov, 0x2b, 0);
-	reg_w(ov, 0x2c, 0);
-	reg_w(ov, 0x2d, 0);
-	reg_w(ov, 0x2e, 0);
-	reg_w(ov, 0x3b, 0);
-	reg_w(ov, 0x3c, 0);
-	reg_w(ov, 0x3d, 0);
-	reg_w(ov, 0x3e, 0);
-
-	if (ov->bridge == BRG_OV518 && ov518_color) {
-		/* OV518 needs U and V swapped */
-		i2c_w_mask(ov, 0x15, 0x00, 0x01);
-
-		if (mode == VIDEO_PALETTE_GREY) {
-			/* Set 16-bit input format (UV data are ignored) */
-			reg_w_mask(ov, 0x20, 0x00, 0x08);
-
-			/* Set 8-bit (4:0:0) output format */
-			reg_w_mask(ov, 0x28, 0x00, 0xf0);
-			reg_w_mask(ov, 0x38, 0x00, 0xf0);
-		} else {
-			/* Set 8-bit (YVYU) input format */
-			reg_w_mask(ov, 0x20, 0x08, 0x08);
-
-			/* Set 12-bit (4:2:0) output format */
-			reg_w_mask(ov, 0x28, 0x80, 0xf0);
-			reg_w_mask(ov, 0x38, 0x80, 0xf0);
-		}
-	} else {
-		reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
-		reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
-	}
-
-	hsegs = width / 16;
-	vsegs = height / 4;
-
-	reg_w(ov, 0x29, hsegs);
-	reg_w(ov, 0x2a, vsegs);
-
-	reg_w(ov, 0x39, hsegs);
-	reg_w(ov, 0x3a, vsegs);
-
-	/* Windows driver does this here; who knows why */
-	reg_w(ov, 0x2f, 0x80);
-
-	/******** Set the framerate (to 15 FPS) ********/
-
-	/* Mode independent, but framerate dependent, regs */
-	reg_w(ov, 0x51, 0x02);	/* Clock divider; lower==faster */
-	reg_w(ov, 0x22, 0x18);
-	reg_w(ov, 0x23, 0xff);
-
-	if (ov->bridge == BRG_OV518PLUS)
-		reg_w(ov, 0x21, 0x19);
-	else
-		reg_w(ov, 0x71, 0x19);	/* Compression-related? */
-
-	// FIXME: Sensor-specific
-	/* Bit 5 is what matters here. Of course, it is "reserved" */
-	i2c_w(ov, 0x54, 0x23);
-
-	reg_w(ov, 0x2f, 0x80);
-
-	if (ov->bridge == BRG_OV518PLUS) {
-		reg_w(ov, 0x24, 0x94);
-		reg_w(ov, 0x25, 0x90);
-		ov518_reg_w32(ov, 0xc4,    400, 2);	/* 190h   */
-		ov518_reg_w32(ov, 0xc6,    540, 2);	/* 21ch   */
-		ov518_reg_w32(ov, 0xc7,    540, 2);	/* 21ch   */
-		ov518_reg_w32(ov, 0xc8,    108, 2);	/* 6ch    */
-		ov518_reg_w32(ov, 0xca, 131098, 3);	/* 2001ah */
-		ov518_reg_w32(ov, 0xcb,    532, 2);	/* 214h   */
-		ov518_reg_w32(ov, 0xcc,   2400, 2);	/* 960h   */
-		ov518_reg_w32(ov, 0xcd,     32, 2);	/* 20h    */
-		ov518_reg_w32(ov, 0xce,    608, 2);	/* 260h   */
-	} else {
-		reg_w(ov, 0x24, 0x9f);
-		reg_w(ov, 0x25, 0x90);
-		ov518_reg_w32(ov, 0xc4,    400, 2);	/* 190h   */
-		ov518_reg_w32(ov, 0xc6,    500, 2);	/* 1f4h   */
-		ov518_reg_w32(ov, 0xc7,    500, 2);	/* 1f4h   */
-		ov518_reg_w32(ov, 0xc8,    142, 2);	/* 8eh    */
-		ov518_reg_w32(ov, 0xca, 131098, 3);	/* 2001ah */
-		ov518_reg_w32(ov, 0xcb,    532, 2);	/* 214h   */
-		ov518_reg_w32(ov, 0xcc,   2000, 2);	/* 7d0h   */
-		ov518_reg_w32(ov, 0xcd,     32, 2);	/* 20h    */
-		ov518_reg_w32(ov, 0xce,    608, 2);	/* 260h   */
-	}
-
-	reg_w(ov, 0x2f, 0x80);
-
-	if (ov51x_restart(ov) < 0)
-		return -EIO;
-
-	/* Reset it just for good measure */
-	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
-		return -EIO;
-
-	return 0;
-}
-
-/* This is a wrapper around the OV511, OV518, and sensor specific functions */
-static int
-mode_init_regs(struct usb_ov511 *ov,
-	       int width, int height, int mode, int sub_flag)
-{
-	int rc = 0;
-
-	if (!ov || !ov->dev)
-		return -EFAULT;
-
-	if (ov->bclass == BCL_OV518) {
-		rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag);
-	} else {
-		rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag);
-	}
-
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	switch (ov->sensor) {
-	case SEN_OV7610:
-	case SEN_OV7620:
-	case SEN_OV76BE:
-	case SEN_OV8600:
-	case SEN_OV6620:
-	case SEN_OV6630:
-		rc = set_ov_sensor_window(ov, width, height, mode, sub_flag);
-		break;
-	case SEN_KS0127:
-	case SEN_KS0127B:
-		err("KS0127-series decoders not supported yet");
-		rc = -EINVAL;
-		break;
-	case SEN_SAA7111A:
-//		rc = mode_init_saa_sensor_regs(ov, width, height, mode,
-//					       sub_flag);
-
-		PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f));
-		break;
-	default:
-		err("Unknown sensor");
-		rc = -EINVAL;
-	}
-
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	/* Sensor-independent settings */
-	rc = sensor_set_auto_brightness(ov, ov->auto_brt);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_auto_exposure(ov, ov->auto_exp);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_banding_filter(ov, bandingfilter);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	if (ov->lightfreq) {
-		rc = sensor_set_light_freq(ov, lightfreq);
-		if (FATAL_ERROR(rc))
-			return rc;
-	}
-
-	rc = sensor_set_backlight(ov, ov->backlight);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	rc = sensor_set_mirror(ov, ov->mirror);
-	if (FATAL_ERROR(rc))
-		return rc;
-
-	return 0;
-}
-
-/* This sets the default image parameters. This is useful for apps that use
- * read() and do not set these.
- */
-static int
-ov51x_set_default_params(struct usb_ov511 *ov)
-{
-	int i;
-
-	/* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used
-	 * (using read() instead). */
-	for (i = 0; i < OV511_NUMFRAMES; i++) {
-		ov->frame[i].width = ov->maxwidth;
-		ov->frame[i].height = ov->maxheight;
-		ov->frame[i].bytes_read = 0;
-		if (force_palette)
-			ov->frame[i].format = force_palette;
-		else
-			ov->frame[i].format = VIDEO_PALETTE_YUV420;
-
-		ov->frame[i].depth = get_depth(ov->frame[i].format);
-	}
-
-	PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight,
-	       symbolic(v4l1_plist, ov->frame[0].format));
-
-	/* Initialize to max width/height, YUV420 or RGB24 (if supported) */
-	if (mode_init_regs(ov, ov->maxwidth, ov->maxheight,
-			   ov->frame[0].format, 0) < 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-/**********************************************************************
- *
- * Video decoder stuff
- *
- **********************************************************************/
-
-/* Set analog input port of decoder */
-static int
-decoder_set_input(struct usb_ov511 *ov, int input)
-{
-	PDEBUG(4, "port %d", input);
-
-	switch (ov->sensor) {
-	case SEN_SAA7111A:
-	{
-		/* Select mode */
-		i2c_w_mask(ov, 0x02, input, 0x07);
-		/* Bypass chrominance trap for modes 4..7 */
-		i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80);
-		break;
-	}
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Get ASCII name of video input */
-static int
-decoder_get_input_name(struct usb_ov511 *ov, int input, char *name)
-{
-	switch (ov->sensor) {
-	case SEN_SAA7111A:
-	{
-		if (input < 0 || input > 7)
-			return -EINVAL;
-		else if (input < 4)
-			sprintf(name, "CVBS-%d", input);
-		else // if (input < 8)
-			sprintf(name, "S-Video-%d", input - 4);
-		break;
-	}
-	default:
-		sprintf(name, "%s", "Camera");
-	}
-
-	return 0;
-}
-
-/* Set norm (NTSC, PAL, SECAM, AUTO) */
-static int
-decoder_set_norm(struct usb_ov511 *ov, int norm)
-{
-	PDEBUG(4, "%d", norm);
-
-	switch (ov->sensor) {
-	case SEN_SAA7111A:
-	{
-		int reg_8, reg_e;
-
-		if (norm == VIDEO_MODE_NTSC) {
-			reg_8 = 0x40;	/* 60 Hz */
-			reg_e = 0x00;	/* NTSC M / PAL BGHI */
-		} else if (norm == VIDEO_MODE_PAL) {
-			reg_8 = 0x00;	/* 50 Hz */
-			reg_e = 0x00;	/* NTSC M / PAL BGHI */
-		} else if (norm == VIDEO_MODE_AUTO) {
-			reg_8 = 0x80;	/* Auto field detect */
-			reg_e = 0x00;	/* NTSC M / PAL BGHI */
-		} else if (norm == VIDEO_MODE_SECAM) {
-			reg_8 = 0x00;	/* 50 Hz */
-			reg_e = 0x50;	/* SECAM / PAL 4.43 */
-		} else {
-			return -EINVAL;
-		}
-
-		i2c_w_mask(ov, 0x08, reg_8, 0xc0);
-		i2c_w_mask(ov, 0x0e, reg_e, 0x70);
-		break;
-	}
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**********************************************************************
- *
- * Raw data parsing
- *
- **********************************************************************/
-
-/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the
- * image at pOut is specified by w.
- */
-static inline void
-make_8x8(unsigned char *pIn, unsigned char *pOut, int w)
-{
-	unsigned char *pOut1 = pOut;
-	int x, y;
-
-	for (y = 0; y < 8; y++) {
-		pOut1 = pOut;
-		for (x = 0; x < 8; x++) {
-			*pOut1++ = *pIn++;
-		}
-		pOut += w;
-	}
-}
-
-/*
- * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments.
- * The segments represent 4 squares of 8x8 pixels as follows:
- *
- *      0  1 ...  7    64  65 ...  71   ...  192 193 ... 199
- *      8  9 ... 15    72  73 ...  79        200 201 ... 207
- *           ...              ...                    ...
- *     56 57 ... 63   120 121 ... 127        248 249 ... 255
- *
- */
-static void
-yuv400raw_to_yuv400p(struct ov511_frame *frame,
-		     unsigned char *pIn0, unsigned char *pOut0)
-{
-	int x, y;
-	unsigned char *pIn, *pOut, *pOutLine;
-
-	/* Copy Y */
-	pIn = pIn0;
-	pOutLine = pOut0;
-	for (y = 0; y < frame->rawheight - 1; y += 8) {
-		pOut = pOutLine;
-		for (x = 0; x < frame->rawwidth - 1; x += 8) {
-			make_8x8(pIn, pOut, frame->rawwidth);
-			pIn += 64;
-			pOut += 8;
-		}
-		pOutLine += 8 * frame->rawwidth;
-	}
-}
-
-/*
- * For YUV 4:2:0 images, the data show up in 384 byte segments.
- * The first 64 bytes of each segment are U, the next 64 are V.  The U and
- * V are arranged as follows:
- *
- *      0  1 ...  7
- *      8  9 ... 15
- *           ...
- *     56 57 ... 63
- *
- * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block).
- *
- * The next 256 bytes are full resolution Y data and represent 4 squares
- * of 8x8 pixels as follows:
- *
- *      0  1 ...  7    64  65 ...  71   ...  192 193 ... 199
- *      8  9 ... 15    72  73 ...  79        200 201 ... 207
- *           ...              ...                    ...
- *     56 57 ... 63   120 121 ... 127   ...  248 249 ... 255
- *
- * Note that the U and V data in one segment represent a 16 x 16 pixel
- * area, but the Y data represent a 32 x 8 pixel area. If the width is not an
- * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the
- * next horizontal stripe.
- *
- * If dumppix module param is set, _parse_data just dumps the incoming segments,
- * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480
- * this puts the data on the standard output and can be analyzed with the
- * parseppm.c utility I wrote.  That's a much faster way for figuring out how
- * these data are scrambled.
- */
-
-/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0.
- *
- * FIXME: Currently only handles width and height that are multiples of 16
- */
-static void
-yuv420raw_to_yuv420p(struct ov511_frame *frame,
-		     unsigned char *pIn0, unsigned char *pOut0)
-{
-	int k, x, y;
-	unsigned char *pIn, *pOut, *pOutLine;
-	const unsigned int a = frame->rawwidth * frame->rawheight;
-	const unsigned int w = frame->rawwidth / 2;
-
-	/* Copy U and V */
-	pIn = pIn0;
-	pOutLine = pOut0 + a;
-	for (y = 0; y < frame->rawheight - 1; y += 16) {
-		pOut = pOutLine;
-		for (x = 0; x < frame->rawwidth - 1; x += 16) {
-			make_8x8(pIn, pOut, w);
-			make_8x8(pIn + 64, pOut + a/4, w);
-			pIn += 384;
-			pOut += 8;
-		}
-		pOutLine += 8 * w;
-	}
-
-	/* Copy Y */
-	pIn = pIn0 + 128;
-	pOutLine = pOut0;
-	k = 0;
-	for (y = 0; y < frame->rawheight - 1; y += 8) {
-		pOut = pOutLine;
-		for (x = 0; x < frame->rawwidth - 1; x += 8) {
-			make_8x8(pIn, pOut, frame->rawwidth);
-			pIn += 64;
-			pOut += 8;
-			if ((++k) > 3) {
-				k = 0;
-				pIn += 128;
-			}
-		}
-		pOutLine += 8 * frame->rawwidth;
-	}
-}
-
-/**********************************************************************
- *
- * Decompression
- *
- **********************************************************************/
-
-static int
-request_decompressor(struct usb_ov511 *ov)
-{
-	if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
-		err("No decompressor available");
-	} else {
-		err("Unknown bridge");
-	}
-
-	return -ENOSYS;
-}
-
-static void
-decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
-	   unsigned char *pIn0, unsigned char *pOut0)
-{
-	if (!ov->decomp_ops)
-		if (request_decompressor(ov))
-			return;
-
-}
-
-/**********************************************************************
- *
- * Format conversion
- *
- **********************************************************************/
-
-/* Fuses even and odd fields together, and doubles width.
- * INPUT: an odd field followed by an even field at pIn0, in YUV planar format
- * OUTPUT: a normal YUV planar image, with correct aspect ratio
- */
-static void
-deinterlace(struct ov511_frame *frame, int rawformat,
-	    unsigned char *pIn0, unsigned char *pOut0)
-{
-	const int fieldheight = frame->rawheight / 2;
-	const int fieldpix = fieldheight * frame->rawwidth;
-	const int w = frame->width;
-	int x, y;
-	unsigned char *pInEven, *pInOdd, *pOut;
-
-	PDEBUG(5, "fieldheight=%d", fieldheight);
-
-	if (frame->rawheight != frame->height) {
-		err("invalid height");
-		return;
-	}
-
-	if ((frame->rawwidth * 2) != frame->width) {
-		err("invalid width");
-		return;
-	}
-
-	/* Y */
-	pInOdd = pIn0;
-	pInEven = pInOdd + fieldpix;
-	pOut = pOut0;
-	for (y = 0; y < fieldheight; y++) {
-		for (x = 0; x < frame->rawwidth; x++) {
-			*pOut = *pInEven;
-			*(pOut+1) = *pInEven++;
-			*(pOut+w) = *pInOdd;
-			*(pOut+w+1) = *pInOdd++;
-			pOut += 2;
-		}
-		pOut += w;
-	}
-
-	if (rawformat == RAWFMT_YUV420) {
-	/* U */
-		pInOdd = pIn0 + fieldpix * 2;
-		pInEven = pInOdd + fieldpix / 4;
-		for (y = 0; y < fieldheight / 2; y++) {
-			for (x = 0; x < frame->rawwidth / 2; x++) {
-				*pOut = *pInEven;
-				*(pOut+1) = *pInEven++;
-				*(pOut+w/2) = *pInOdd;
-				*(pOut+w/2+1) = *pInOdd++;
-				pOut += 2;
-			}
-			pOut += w/2;
-		}
-	/* V */
-		pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2;
-		pInEven = pInOdd + fieldpix / 4;
-		for (y = 0; y < fieldheight / 2; y++) {
-			for (x = 0; x < frame->rawwidth / 2; x++) {
-				*pOut = *pInEven;
-				*(pOut+1) = *pInEven++;
-				*(pOut+w/2) = *pInOdd;
-				*(pOut+w/2+1) = *pInOdd++;
-				pOut += 2;
-			}
-			pOut += w/2;
-		}
-	}
-}
-
-static void
-ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
-		/* Deinterlace frame, if necessary */
-		if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
-			if (frame->compressed)
-				decompress(ov, frame, frame->rawdata,
-						 frame->tempdata);
-			else
-				yuv400raw_to_yuv400p(frame, frame->rawdata,
-						     frame->tempdata);
-
-			deinterlace(frame, RAWFMT_YUV400, frame->tempdata,
-				    frame->data);
-		} else {
-			if (frame->compressed)
-				decompress(ov, frame, frame->rawdata,
-						 frame->data);
-			else
-				yuv400raw_to_yuv400p(frame, frame->rawdata,
-						     frame->data);
-		}
-}
-
-/* Process raw YUV420 data into standard YUV420P */
-static void
-ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
-	/* Deinterlace frame, if necessary */
-	if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
-		if (frame->compressed)
-			decompress(ov, frame, frame->rawdata, frame->tempdata);
-		else
-			yuv420raw_to_yuv420p(frame, frame->rawdata,
-					     frame->tempdata);
-
-		deinterlace(frame, RAWFMT_YUV420, frame->tempdata,
-			    frame->data);
-	} else {
-		if (frame->compressed)
-			decompress(ov, frame, frame->rawdata, frame->data);
-		else
-			yuv420raw_to_yuv420p(frame, frame->rawdata,
-					     frame->data);
-	}
-}
-
-/* Post-processes the specified frame. This consists of:
- * 	1. Decompress frame, if necessary
- *	2. Deinterlace frame and scale to proper size, if necessary
- * 	3. Convert from YUV planar to destination format, if necessary
- * 	4. Fix the RGB offset, if necessary
- */
-static void
-ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
-	if (dumppix) {
-		memset(frame->data, 0,
-			MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
-		PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd);
-		memcpy(frame->data, frame->rawdata, frame->bytes_recvd);
-	} else {
-		switch (frame->format) {
-		case VIDEO_PALETTE_GREY:
-			ov51x_postprocess_grey(ov, frame);
-			break;
-		case VIDEO_PALETTE_YUV420:
-		case VIDEO_PALETTE_YUV420P:
-			ov51x_postprocess_yuv420(ov, frame);
-			break;
-		default:
-			err("Cannot convert data to %s",
-			    symbolic(v4l1_plist, frame->format));
-		}
-	}
-}
-
-/**********************************************************************
- *
- * OV51x data transfer, IRQ handler
- *
- **********************************************************************/
-
-static inline void
-ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
-{
-	int num, offset;
-	int pnum = in[ov->packet_size - 1];		/* Get packet number */
-	int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
-	struct ov511_frame *frame = &ov->frame[ov->curframe];
-	struct timeval *ts;
-
-	/* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
-	 * byte non-zero. The EOF packet has image width/height in the
-	 * 10th and 11th bytes. The 9th byte is given as follows:
-	 *
-	 * bit 7: EOF
-	 *     6: compression enabled
-	 *     5: 422/420/400 modes
-	 *     4: 422/420/400 modes
-	 *     3: 1
-	 *     2: snapshot button on
-	 *     1: snapshot frame
-	 *     0: even/odd field
-	 */
-
-	if (printph) {
-		dev_info(&ov->dev->dev,
-			 "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n",
-			 pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
-			 in[7], in[8], in[9], in[10], in[11]);
-	}
-
-	/* Check for SOF/EOF packet */
-	if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) ||
-	    (~in[8] & 0x08))
-		goto check_middle;
-
-	/* Frame end */
-	if (in[8] & 0x80) {
-		ts = (struct timeval *)(frame->data
-		      + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
-		do_gettimeofday(ts);
-
-		/* Get the actual frame size from the EOF header */
-		frame->rawwidth = ((int)(in[9]) + 1) * 8;
-		frame->rawheight = ((int)(in[10]) + 1) * 8;
-
-		PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d",
-			ov->curframe, pnum, frame->rawwidth, frame->rawheight,
-			frame->bytes_recvd);
-
-		/* Validate the header data */
-		RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
-		RESTRICT_TO_RANGE(frame->rawheight, ov->minheight,
-				  ov->maxheight);
-
-		/* Don't allow byte count to exceed buffer size */
-		RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
-
-		if (frame->scanstate == STATE_LINES) {
-			int nextf;
-
-			frame->grabstate = FRAME_DONE;
-			wake_up_interruptible(&frame->wq);
-
-			/* If next frame is ready or grabbing,
-			 * point to it */
-			nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
-			if (ov->frame[nextf].grabstate == FRAME_READY
-			    || ov->frame[nextf].grabstate == FRAME_GRABBING) {
-				ov->curframe = nextf;
-				ov->frame[nextf].scanstate = STATE_SCANNING;
-			} else {
-				if (frame->grabstate == FRAME_DONE) {
-					PDEBUG(4, "** Frame done **");
-				} else {
-					PDEBUG(4, "Frame not ready? state = %d",
-						ov->frame[nextf].grabstate);
-				}
-
-				ov->curframe = -1;
-			}
-		} else {
-			PDEBUG(5, "Frame done, but not scanning");
-		}
-		/* Image corruption caused by misplaced frame->segment = 0
-		 * fixed by carlosf@conectiva.com.br
-		 */
-	} else {
-		/* Frame start */
-		PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
-
-		/* Check to see if it's a snapshot frame */
-		/* FIXME?? Should the snapshot reset go here? Performance? */
-		if (in[8] & 0x02) {
-			frame->snapshot = 1;
-			PDEBUG(3, "snapshot detected");
-		}
-
-		frame->scanstate = STATE_LINES;
-		frame->bytes_recvd = 0;
-		frame->compressed = in[8] & 0x40;
-	}
-
-check_middle:
-	/* Are we in a frame? */
-	if (frame->scanstate != STATE_LINES) {
-		PDEBUG(5, "Not in a frame; packet skipped");
-		return;
-	}
-
-	/* If frame start, skip header */
-	if (frame->bytes_recvd == 0)
-		offset = 9;
-	else
-		offset = 0;
-
-	num = n - offset - 1;
-
-	/* Dump all data exactly as received */
-	if (dumppix == 2) {
-		frame->bytes_recvd += n - 1;
-		if (frame->bytes_recvd <= max_raw)
-			memcpy(frame->rawdata + frame->bytes_recvd - (n - 1),
-				in, n - 1);
-		else
-			PDEBUG(3, "Raw data buffer overrun!! (%d)",
-				frame->bytes_recvd - max_raw);
-	} else if (!frame->compressed && !remove_zeros) {
-		frame->bytes_recvd += num;
-		if (frame->bytes_recvd <= max_raw)
-			memcpy(frame->rawdata + frame->bytes_recvd - num,
-				in + offset, num);
-		else
-			PDEBUG(3, "Raw data buffer overrun!! (%d)",
-				frame->bytes_recvd - max_raw);
-	} else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */
-		int b, read = 0, allzero, copied = 0;
-		if (offset) {
-			frame->bytes_recvd += 32 - offset;	// Bytes out
-			memcpy(frame->rawdata,	in + offset, 32 - offset);
-			read += 32;
-		}
-
-		while (read < n - 1) {
-			allzero = 1;
-			for (b = 0; b < 32; b++) {
-				if (in[read + b]) {
-					allzero = 0;
-					break;
-				}
-			}
-
-			if (allzero) {
-				/* Don't copy it */
-			} else {
-				if (frame->bytes_recvd + copied + 32 <= max_raw)
-				{
-					memcpy(frame->rawdata
-						+ frame->bytes_recvd + copied,
-						in + read, 32);
-					copied += 32;
-				} else {
-					PDEBUG(3, "Raw data buffer overrun!!");
-				}
-			}
-			read += 32;
-		}
-
-		frame->bytes_recvd += copied;
-	}
-}
-
-static inline void
-ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
-{
-	int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
-	struct ov511_frame *frame = &ov->frame[ov->curframe];
-	struct timeval *ts;
-
-	/* Don't copy the packet number byte */
-	if (ov->packet_numbering)
-		--n;
-
-	/* A false positive here is likely, until OVT gives me
-	 * the definitive SOF/EOF format */
-	if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) {
-		if (printph) {
-			dev_info(&ov->dev->dev,
-				 "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n",
-				 in[0], in[1], in[2], in[3], in[4], in[5],
-				 in[6], in[7]);
-		}
-
-		if (frame->scanstate == STATE_LINES) {
-			PDEBUG(4, "Detected frame end/start");
-			goto eof;
-		} else { //scanstate == STATE_SCANNING
-			/* Frame start */
-			PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
-			goto sof;
-		}
-	} else {
-		goto check_middle;
-	}
-
-eof:
-	ts = (struct timeval *)(frame->data
-	      + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
-	do_gettimeofday(ts);
-
-	PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d",
-		ov->curframe,
-		(int)(in[9]), (int)(in[10]), frame->bytes_recvd);
-
-	// FIXME: Since we don't know the header formats yet,
-	// there is no way to know what the actual image size is
-	frame->rawwidth = frame->width;
-	frame->rawheight = frame->height;
-
-	/* Validate the header data */
-	RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
-	RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight);
-
-	/* Don't allow byte count to exceed buffer size */
-	RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
-
-	if (frame->scanstate == STATE_LINES) {
-		int nextf;
-
-		frame->grabstate = FRAME_DONE;
-		wake_up_interruptible(&frame->wq);
-
-		/* If next frame is ready or grabbing,
-		 * point to it */
-		nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
-		if (ov->frame[nextf].grabstate == FRAME_READY
-		    || ov->frame[nextf].grabstate == FRAME_GRABBING) {
-			ov->curframe = nextf;
-			ov->frame[nextf].scanstate = STATE_SCANNING;
-			frame = &ov->frame[nextf];
-		} else {
-			if (frame->grabstate == FRAME_DONE) {
-				PDEBUG(4, "** Frame done **");
-			} else {
-				PDEBUG(4, "Frame not ready? state = %d",
-				       ov->frame[nextf].grabstate);
-			}
-
-			ov->curframe = -1;
-			PDEBUG(4, "SOF dropped (no active frame)");
-			return;  /* Nowhere to store this frame */
-		}
-	}
-sof:
-	PDEBUG(4, "Starting capture on frame %d", frame->framenum);
-
-// Snapshot not reverse-engineered yet.
-#if 0
-	/* Check to see if it's a snapshot frame */
-	/* FIXME?? Should the snapshot reset go here? Performance? */
-	if (in[8] & 0x02) {
-		frame->snapshot = 1;
-		PDEBUG(3, "snapshot detected");
-	}
-#endif
-	frame->scanstate = STATE_LINES;
-	frame->bytes_recvd = 0;
-	frame->compressed = 1;
-
-check_middle:
-	/* Are we in a frame? */
-	if (frame->scanstate != STATE_LINES) {
-		PDEBUG(4, "scanstate: no SOF yet");
-		return;
-	}
-
-	/* Dump all data exactly as received */
-	if (dumppix == 2) {
-		frame->bytes_recvd += n;
-		if (frame->bytes_recvd <= max_raw)
-			memcpy(frame->rawdata + frame->bytes_recvd - n, in, n);
-		else
-			PDEBUG(3, "Raw data buffer overrun!! (%d)",
-				frame->bytes_recvd - max_raw);
-	} else {
-		/* All incoming data are divided into 8-byte segments. If the
-		 * segment contains all zero bytes, it must be skipped. These
-		 * zero-segments allow the OV518 to mainain a constant data rate
-		 * regardless of the effectiveness of the compression. Segments
-		 * are aligned relative to the beginning of each isochronous
-		 * packet. The first segment in each image is a header (the
-		 * decompressor skips it later).
-		 */
-
-		int b, read = 0, allzero, copied = 0;
-
-		while (read < n) {
-			allzero = 1;
-			for (b = 0; b < 8; b++) {
-				if (in[read + b]) {
-					allzero = 0;
-					break;
-				}
-			}
-
-			if (allzero) {
-			/* Don't copy it */
-			} else {
-				if (frame->bytes_recvd + copied + 8 <= max_raw)
-				{
-					memcpy(frame->rawdata
-						+ frame->bytes_recvd + copied,
-						in + read, 8);
-					copied += 8;
-				} else {
-					PDEBUG(3, "Raw data buffer overrun!!");
-				}
-			}
-			read += 8;
-		}
-		frame->bytes_recvd += copied;
-	}
-}
-
-static void
-ov51x_isoc_irq(struct urb *urb)
-{
-	int i;
-	struct usb_ov511 *ov;
-	struct ov511_sbuf *sbuf;
-
-	if (!urb->context) {
-		PDEBUG(4, "no context");
-		return;
-	}
-
-	sbuf = urb->context;
-	ov = sbuf->ov;
-
-	if (!ov || !ov->dev || !ov->user) {
-		PDEBUG(4, "no device, or not open");
-		return;
-	}
-
-	if (!ov->streaming) {
-		PDEBUG(4, "hmmm... not streaming, but got interrupt");
-		return;
-	}
-
-	if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
-		PDEBUG(4, "URB unlinked");
-		return;
-	}
-
-	if (urb->status != -EINPROGRESS && urb->status != 0) {
-		err("ERROR: urb->status=%d: %s", urb->status,
-		    symbolic(urb_errlist, urb->status));
-	}
-
-	/* Copy the data received into our frame buffer */
-	PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n,
-	       urb->number_of_packets);
-	for (i = 0; i < urb->number_of_packets; i++) {
-		/* Warning: Don't call *_move_data() if no frame active! */
-		if (ov->curframe >= 0) {
-			int n = urb->iso_frame_desc[i].actual_length;
-			int st = urb->iso_frame_desc[i].status;
-			unsigned char *cdata;
-
-			urb->iso_frame_desc[i].actual_length = 0;
-			urb->iso_frame_desc[i].status = 0;
-
-			cdata = urb->transfer_buffer
-				+ urb->iso_frame_desc[i].offset;
-
-			if (!n) {
-				PDEBUG(4, "Zero-length packet");
-				continue;
-			}
-
-			if (st)
-				PDEBUG(2, "data error: [%d] len=%d, status=%d",
-				       i, n, st);
-
-			if (ov->bclass == BCL_OV511)
-				ov511_move_data(ov, cdata, n);
-			else if (ov->bclass == BCL_OV518)
-				ov518_move_data(ov, cdata, n);
-			else
-				err("Unknown bridge device (%d)", ov->bridge);
-
-		} else if (waitqueue_active(&ov->wq)) {
-			wake_up_interruptible(&ov->wq);
-		}
-	}
-
-	/* Resubmit this URB */
-	urb->dev = ov->dev;
-	if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
-		err("usb_submit_urb() ret %d", i);
-
-	return;
-}
-
-/****************************************************************************
- *
- * Stream initialization and termination
- *
- ***************************************************************************/
-
-static int
-ov51x_init_isoc(struct usb_ov511 *ov)
-{
-	struct urb *urb;
-	int fx, err, n, i, size;
-
-	PDEBUG(3, "*** Initializing capture ***");
-
-	ov->curframe = -1;
-
-	if (ov->bridge == BRG_OV511) {
-		if (cams == 1)
-			size = 993;
-		else if (cams == 2)
-			size = 513;
-		else if (cams == 3 || cams == 4)
-			size = 257;
-		else {
-			err("\"cams\" parameter too high!");
-			return -1;
-		}
-	} else if (ov->bridge == BRG_OV511PLUS) {
-		if (cams == 1)
-			size = 961;
-		else if (cams == 2)
-			size = 513;
-		else if (cams == 3 || cams == 4)
-			size = 257;
-		else if (cams >= 5 && cams <= 8)
-			size = 129;
-		else if (cams >= 9 && cams <= 31)
-			size = 33;
-		else {
-			err("\"cams\" parameter too high!");
-			return -1;
-		}
-	} else if (ov->bclass == BCL_OV518) {
-		if (cams == 1)
-			size = 896;
-		else if (cams == 2)
-			size = 512;
-		else if (cams == 3 || cams == 4)
-			size = 256;
-		else if (cams >= 5 && cams <= 8)
-			size = 128;
-		else {
-			err("\"cams\" parameter too high!");
-			return -1;
-		}
-	} else {
-		err("invalid bridge type");
-		return -1;
-	}
-
-	// FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now
-	if (ov->bclass == BCL_OV518) {
-		if (packetsize == -1) {
-			ov518_set_packet_size(ov, 640);
-		} else {
-			dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
-				 packetsize);
-			ov518_set_packet_size(ov, packetsize);
-		}
-	} else {
-		if (packetsize == -1) {
-			ov511_set_packet_size(ov, size);
-		} else {
-			dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
-				 packetsize);
-			ov511_set_packet_size(ov, packetsize);
-		}
-	}
-
-	for (n = 0; n < OV511_NUMSBUF; n++) {
-		urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-		if (!urb) {
-			err("init isoc: usb_alloc_urb ret. NULL");
-			for (i = 0; i < n; i++)
-				usb_free_urb(ov->sbuf[i].urb);
-			return -ENOMEM;
-		}
-		ov->sbuf[n].urb = urb;
-		urb->dev = ov->dev;
-		urb->context = &ov->sbuf[n];
-		urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS);
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = ov->sbuf[n].data;
-		urb->complete = ov51x_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC;
-		urb->interval = 1;
-		for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
-			urb->iso_frame_desc[fx].offset = ov->packet_size * fx;
-			urb->iso_frame_desc[fx].length = ov->packet_size;
-		}
-	}
-
-	ov->streaming = 1;
-
-	for (n = 0; n < OV511_NUMSBUF; n++) {
-		ov->sbuf[n].urb->dev = ov->dev;
-		err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL);
-		if (err) {
-			err("init isoc: usb_submit_urb(%d) ret %d", n, err);
-			return err;
-		}
-	}
-
-	return 0;
-}
-
-static void
-ov51x_unlink_isoc(struct usb_ov511 *ov)
-{
-	int n;
-
-	/* Unschedule all of the iso td's */
-	for (n = OV511_NUMSBUF - 1; n >= 0; n--) {
-		if (ov->sbuf[n].urb) {
-			usb_kill_urb(ov->sbuf[n].urb);
-			usb_free_urb(ov->sbuf[n].urb);
-			ov->sbuf[n].urb = NULL;
-		}
-	}
-}
-
-static void
-ov51x_stop_isoc(struct usb_ov511 *ov)
-{
-	if (!ov->streaming || !ov->dev)
-		return;
-
-	PDEBUG(3, "*** Stopping capture ***");
-
-	if (ov->bclass == BCL_OV518)
-		ov518_set_packet_size(ov, 0);
-	else
-		ov511_set_packet_size(ov, 0);
-
-	ov->streaming = 0;
-
-	ov51x_unlink_isoc(ov);
-}
-
-static int
-ov51x_new_frame(struct usb_ov511 *ov, int framenum)
-{
-	struct ov511_frame *frame;
-	int newnum;
-
-	PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum);
-
-	if (!ov->dev)
-		return -1;
-
-	/* If we're not grabbing a frame right now and the other frame is */
-	/* ready to be grabbed into, then use it instead */
-	if (ov->curframe == -1) {
-		newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES;
-		if (ov->frame[newnum].grabstate == FRAME_READY)
-			framenum = newnum;
-	} else
-		return 0;
-
-	frame = &ov->frame[framenum];
-
-	PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum,
-	       frame->width, frame->height);
-
-	frame->grabstate = FRAME_GRABBING;
-	frame->scanstate = STATE_SCANNING;
-	frame->snapshot = 0;
-
-	ov->curframe = framenum;
-
-	/* Make sure it's not too big */
-	if (frame->width > ov->maxwidth)
-		frame->width = ov->maxwidth;
-
-	frame->width &= ~7L;		/* Multiple of 8 */
-
-	if (frame->height > ov->maxheight)
-		frame->height = ov->maxheight;
-
-	frame->height &= ~3L;		/* Multiple of 4 */
-
-	return 0;
-}
-
-/****************************************************************************
- *
- * Buffer management
- *
- ***************************************************************************/
-
-/*
- * - You must acquire buf_lock before entering this function.
- * - Because this code will free any non-null pointer, you must be sure to null
- *   them if you explicitly free them somewhere else!
- */
-static void
-ov51x_do_dealloc(struct usb_ov511 *ov)
-{
-	int i;
-	PDEBUG(4, "entered");
-
-	if (ov->fbuf) {
-		rvfree(ov->fbuf, OV511_NUMFRAMES
-		       * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
-		ov->fbuf = NULL;
-	}
-
-	vfree(ov->rawfbuf);
-	ov->rawfbuf = NULL;
-
-	vfree(ov->tempfbuf);
-	ov->tempfbuf = NULL;
-
-	for (i = 0; i < OV511_NUMSBUF; i++) {
-		kfree(ov->sbuf[i].data);
-		ov->sbuf[i].data = NULL;
-	}
-
-	for (i = 0; i < OV511_NUMFRAMES; i++) {
-		ov->frame[i].data = NULL;
-		ov->frame[i].rawdata = NULL;
-		ov->frame[i].tempdata = NULL;
-		if (ov->frame[i].compbuf) {
-			free_page((unsigned long) ov->frame[i].compbuf);
-			ov->frame[i].compbuf = NULL;
-		}
-	}
-
-	PDEBUG(4, "buffer memory deallocated");
-	ov->buf_state = BUF_NOT_ALLOCATED;
-	PDEBUG(4, "leaving");
-}
-
-static int
-ov51x_alloc(struct usb_ov511 *ov)
-{
-	int i;
-	const int w = ov->maxwidth;
-	const int h = ov->maxheight;
-	const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h);
-	const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h);
-
-	PDEBUG(4, "entered");
-	mutex_lock(&ov->buf_lock);
-
-	if (ov->buf_state == BUF_ALLOCATED)
-		goto out;
-
-	ov->fbuf = rvmalloc(data_bufsize);
-	if (!ov->fbuf)
-		goto error;
-
-	ov->rawfbuf = vmalloc(raw_bufsize);
-	if (!ov->rawfbuf)
-		goto error;
-
-	memset(ov->rawfbuf, 0, raw_bufsize);
-
-	ov->tempfbuf = vmalloc(raw_bufsize);
-	if (!ov->tempfbuf)
-		goto error;
-
-	memset(ov->tempfbuf, 0, raw_bufsize);
-
-	for (i = 0; i < OV511_NUMSBUF; i++) {
-		ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC *
-			MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL);
-		if (!ov->sbuf[i].data)
-			goto error;
-
-		PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data);
-	}
-
-	for (i = 0; i < OV511_NUMFRAMES; i++) {
-		ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h);
-		ov->frame[i].rawdata = ov->rawfbuf
-		 + i * MAX_RAW_DATA_SIZE(w, h);
-		ov->frame[i].tempdata = ov->tempfbuf
-		 + i * MAX_RAW_DATA_SIZE(w, h);
-
-		ov->frame[i].compbuf =
-		 (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (!ov->frame[i].compbuf)
-			goto error;
-
-		PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data);
-	}
-
-	ov->buf_state = BUF_ALLOCATED;
-out:
-	mutex_unlock(&ov->buf_lock);
-	PDEBUG(4, "leaving");
-	return 0;
-error:
-	ov51x_do_dealloc(ov);
-	mutex_unlock(&ov->buf_lock);
-	PDEBUG(4, "errored");
-	return -ENOMEM;
-}
-
-static void
-ov51x_dealloc(struct usb_ov511 *ov)
-{
-	PDEBUG(4, "entered");
-	mutex_lock(&ov->buf_lock);
-	ov51x_do_dealloc(ov);
-	mutex_unlock(&ov->buf_lock);
-	PDEBUG(4, "leaving");
-}
-
-/****************************************************************************
- *
- * V4L 1 API
- *
- ***************************************************************************/
-
-static int
-ov51x_v4l1_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-	int err, i;
-
-	PDEBUG(4, "opening");
-
-	mutex_lock(&ov->lock);
-
-	err = -EBUSY;
-	if (ov->user)
-		goto out;
-
-	ov->sub_flag = 0;
-
-	/* In case app doesn't set them... */
-	err = ov51x_set_default_params(ov);
-	if (err < 0)
-		goto out;
-
-	/* Make sure frames are reset */
-	for (i = 0; i < OV511_NUMFRAMES; i++) {
-		ov->frame[i].grabstate = FRAME_UNUSED;
-		ov->frame[i].bytes_read = 0;
-	}
-
-	/* If compression is on, make sure now that a
-	 * decompressor can be loaded */
-	if (ov->compress && !ov->decomp_ops) {
-		err = request_decompressor(ov);
-		if (err && !dumppix)
-			goto out;
-	}
-
-	err = ov51x_alloc(ov);
-	if (err < 0)
-		goto out;
-
-	err = ov51x_init_isoc(ov);
-	if (err) {
-		ov51x_dealloc(ov);
-		goto out;
-	}
-
-	ov->user++;
-	file->private_data = vdev;
-
-	if (ov->led_policy == LED_AUTO)
-		ov51x_led_control(ov, 1);
-
-out:
-	mutex_unlock(&ov->lock);
-	return err;
-}
-
-static int
-ov51x_v4l1_close(struct file *file)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-
-	PDEBUG(4, "ov511_close");
-
-	mutex_lock(&ov->lock);
-
-	ov->user--;
-	ov51x_stop_isoc(ov);
-
-	if (ov->led_policy == LED_AUTO)
-		ov51x_led_control(ov, 0);
-
-	if (ov->dev)
-		ov51x_dealloc(ov);
-
-	mutex_unlock(&ov->lock);
-
-	/* Device unplugged while open. Only a minimum of unregistration is done
-	 * here; the disconnect callback already did the rest. */
-	if (!ov->dev) {
-		mutex_lock(&ov->cbuf_lock);
-		kfree(ov->cbuf);
-		ov->cbuf = NULL;
-		mutex_unlock(&ov->cbuf_lock);
-
-		ov51x_dealloc(ov);
-		kfree(ov);
-		ov = NULL;
-	}
-
-	file->private_data = NULL;
-	return 0;
-}
-
-/* Do not call this function directly! */
-static long
-ov51x_v4l1_ioctl_internal(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-	PDEBUG(5, "IOCtl: 0x%X", cmd);
-
-	if (!ov->dev)
-		return -EIO;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-
-		PDEBUG(4, "VIDIOCGCAP");
-
-		memset(b, 0, sizeof(struct video_capability));
-		sprintf(b->name, "%s USB Camera",
-			symbolic(brglist, ov->bridge));
-		b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE;
-		b->channels = ov->num_inputs;
-		b->audios = 0;
-		b->maxwidth = ov->maxwidth;
-		b->maxheight = ov->maxheight;
-		b->minwidth = ov->minwidth;
-		b->minheight = ov->minheight;
-
-		return 0;
-	}
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		PDEBUG(4, "VIDIOCGCHAN");
-
-		if ((unsigned)(v->channel) >= ov->num_inputs) {
-			err("Invalid channel (%d)", v->channel);
-			return -EINVAL;
-		}
-
-		v->norm = ov->norm;
-		v->type = VIDEO_TYPE_CAMERA;
-		v->flags = 0;
-//		v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0;
-		v->tuners = 0;
-		decoder_get_input_name(ov, v->channel, v->name);
-
-		return 0;
-	}
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-		int err;
-
-		PDEBUG(4, "VIDIOCSCHAN");
-
-		/* Make sure it's not a camera */
-		if (!ov->has_decoder) {
-			if (v->channel == 0)
-				return 0;
-			else
-				return -EINVAL;
-		}
-
-		if (v->norm != VIDEO_MODE_PAL &&
-		    v->norm != VIDEO_MODE_NTSC &&
-		    v->norm != VIDEO_MODE_SECAM &&
-		    v->norm != VIDEO_MODE_AUTO) {
-			err("Invalid norm (%d)", v->norm);
-			return -EINVAL;
-		}
-
-		if ((unsigned)(v->channel) >= ov->num_inputs) {
-			err("Invalid channel (%d)", v->channel);
-			return -EINVAL;
-		}
-
-		err = decoder_set_input(ov, v->channel);
-		if (err)
-			return err;
-
-		err = decoder_set_norm(ov, v->norm);
-		if (err)
-			return err;
-
-		return 0;
-	}
-	case VIDIOCGPICT:
-	{
-		struct video_picture *p = arg;
-
-		PDEBUG(4, "VIDIOCGPICT");
-
-		memset(p, 0, sizeof(struct video_picture));
-		if (sensor_get_picture(ov, p))
-			return -EIO;
-
-		/* Can we get these from frame[0]? -claudio? */
-		p->depth = ov->frame[0].depth;
-		p->palette = ov->frame[0].format;
-
-		return 0;
-	}
-	case VIDIOCSPICT:
-	{
-		struct video_picture *p = arg;
-		int i, rc;
-
-		PDEBUG(4, "VIDIOCSPICT");
-
-		if (!get_depth(p->palette))
-			return -EINVAL;
-
-		if (sensor_set_picture(ov, p))
-			return -EIO;
-
-		if (force_palette && p->palette != force_palette) {
-			dev_info(&ov->dev->dev, "Palette rejected (%s)\n",
-			     symbolic(v4l1_plist, p->palette));
-			return -EINVAL;
-		}
-
-		// FIXME: Format should be independent of frames
-		if (p->palette != ov->frame[0].format) {
-			PDEBUG(4, "Detected format change");
-
-			rc = ov51x_wait_frames_inactive(ov);
-			if (rc)
-				return rc;
-
-			mode_init_regs(ov, ov->frame[0].width,
-				ov->frame[0].height, p->palette, ov->sub_flag);
-		}
-
-		PDEBUG(4, "Setting depth=%d, palette=%s",
-		       p->depth, symbolic(v4l1_plist, p->palette));
-
-		for (i = 0; i < OV511_NUMFRAMES; i++) {
-			ov->frame[i].depth = p->depth;
-			ov->frame[i].format = p->palette;
-		}
-
-		return 0;
-	}
-	case VIDIOCGCAPTURE:
-	{
-		int *vf = arg;
-
-		PDEBUG(4, "VIDIOCGCAPTURE");
-
-		ov->sub_flag = *vf;
-		return 0;
-	}
-	case VIDIOCSCAPTURE:
-	{
-		struct video_capture *vc = arg;
-
-		PDEBUG(4, "VIDIOCSCAPTURE");
-
-		if (vc->flags)
-			return -EINVAL;
-		if (vc->decimation)
-			return -EINVAL;
-
-		vc->x &= ~3L;
-		vc->y &= ~1L;
-		vc->y &= ~31L;
-
-		if (vc->width == 0)
-			vc->width = 32;
-
-		vc->height /= 16;
-		vc->height *= 16;
-		if (vc->height == 0)
-			vc->height = 16;
-
-		ov->subx = vc->x;
-		ov->suby = vc->y;
-		ov->subw = vc->width;
-		ov->subh = vc->height;
-
-		return 0;
-	}
-	case VIDIOCSWIN:
-	{
-		struct video_window *vw = arg;
-		int i, rc;
-
-		PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height);
-
-#if 0
-		if (vw->flags)
-			return -EINVAL;
-		if (vw->clipcount)
-			return -EINVAL;
-		if (vw->height != ov->maxheight)
-			return -EINVAL;
-		if (vw->width != ov->maxwidth)
-			return -EINVAL;
-#endif
-
-		rc = ov51x_wait_frames_inactive(ov);
-		if (rc)
-			return rc;
-
-		rc = mode_init_regs(ov, vw->width, vw->height,
-			ov->frame[0].format, ov->sub_flag);
-		if (rc < 0)
-			return rc;
-
-		for (i = 0; i < OV511_NUMFRAMES; i++) {
-			ov->frame[i].width = vw->width;
-			ov->frame[i].height = vw->height;
-		}
-
-		return 0;
-	}
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-
-		memset(vw, 0, sizeof(struct video_window));
-		vw->x = 0;		/* FIXME */
-		vw->y = 0;
-		vw->width = ov->frame[0].width;
-		vw->height = ov->frame[0].height;
-		vw->flags = 30;
-
-		PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height);
-
-		return 0;
-	}
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *vm = arg;
-		int i;
-
-		PDEBUG(4, "VIDIOCGMBUF");
-
-		memset(vm, 0, sizeof(struct video_mbuf));
-		vm->size = OV511_NUMFRAMES
-			   * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
-		vm->frames = OV511_NUMFRAMES;
-
-		vm->offsets[0] = 0;
-		for (i = 1; i < OV511_NUMFRAMES; i++) {
-			vm->offsets[i] = vm->offsets[i-1]
-			   + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
-		}
-
-		return 0;
-	}
-	case VIDIOCMCAPTURE:
-	{
-		struct video_mmap *vm = arg;
-		int rc, depth;
-		unsigned int f = vm->frame;
-
-		PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width,
-			vm->height, symbolic(v4l1_plist, vm->format));
-
-		depth = get_depth(vm->format);
-		if (!depth) {
-			PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)",
-			       symbolic(v4l1_plist, vm->format));
-			return -EINVAL;
-		}
-
-		if (f >= OV511_NUMFRAMES) {
-			err("VIDIOCMCAPTURE: invalid frame (%d)", f);
-			return -EINVAL;
-		}
-
-		if (vm->width > ov->maxwidth
-		    || vm->height > ov->maxheight) {
-			err("VIDIOCMCAPTURE: requested dimensions too big");
-			return -EINVAL;
-		}
-
-		if (ov->frame[f].grabstate == FRAME_GRABBING) {
-			PDEBUG(4, "VIDIOCMCAPTURE: already grabbing");
-			return -EBUSY;
-		}
-
-		if (force_palette && (vm->format != force_palette)) {
-			PDEBUG(2, "palette rejected (%s)",
-			       symbolic(v4l1_plist, vm->format));
-			return -EINVAL;
-		}
-
-		if ((ov->frame[f].width != vm->width) ||
-		    (ov->frame[f].height != vm->height) ||
-		    (ov->frame[f].format != vm->format) ||
-		    (ov->frame[f].sub_flag != ov->sub_flag) ||
-		    (ov->frame[f].depth != depth)) {
-			PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters");
-
-			rc = ov51x_wait_frames_inactive(ov);
-			if (rc)
-				return rc;
-
-			rc = mode_init_regs(ov, vm->width, vm->height,
-				vm->format, ov->sub_flag);
-#if 0
-			if (rc < 0) {
-				PDEBUG(1, "Got error while initializing regs ");
-				return ret;
-			}
-#endif
-			ov->frame[f].width = vm->width;
-			ov->frame[f].height = vm->height;
-			ov->frame[f].format = vm->format;
-			ov->frame[f].sub_flag = ov->sub_flag;
-			ov->frame[f].depth = depth;
-		}
-
-		/* Mark it as ready */
-		ov->frame[f].grabstate = FRAME_READY;
-
-		PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f);
-
-		return ov51x_new_frame(ov, f);
-	}
-	case VIDIOCSYNC:
-	{
-		unsigned int fnum = *((unsigned int *) arg);
-		struct ov511_frame *frame;
-		int rc;
-
-		if (fnum >= OV511_NUMFRAMES) {
-			err("VIDIOCSYNC: invalid frame (%d)", fnum);
-			return -EINVAL;
-		}
-
-		frame = &ov->frame[fnum];
-
-		PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum,
-		       frame->grabstate);
-
-		switch (frame->grabstate) {
-		case FRAME_UNUSED:
-			return -EINVAL;
-		case FRAME_READY:
-		case FRAME_GRABBING:
-		case FRAME_ERROR:
-redo:
-			if (!ov->dev)
-				return -EIO;
-
-			rc = wait_event_interruptible(frame->wq,
-			    (frame->grabstate == FRAME_DONE)
-			    || (frame->grabstate == FRAME_ERROR));
-
-			if (rc)
-				return rc;
-
-			if (frame->grabstate == FRAME_ERROR) {
-				if ((rc = ov51x_new_frame(ov, fnum)) < 0)
-					return rc;
-				goto redo;
-			}
-			/* Fall through */
-		case FRAME_DONE:
-			if (ov->snap_enabled && !frame->snapshot) {
-				if ((rc = ov51x_new_frame(ov, fnum)) < 0)
-					return rc;
-				goto redo;
-			}
-
-			frame->grabstate = FRAME_UNUSED;
-
-			/* Reset the hardware snapshot button */
-			/* FIXME - Is this the best place for this? */
-			if ((ov->snap_enabled) && (frame->snapshot)) {
-				frame->snapshot = 0;
-				ov51x_clear_snapshot(ov);
-			}
-
-			/* Decompression, format conversion, etc... */
-			ov51x_postprocess(ov, frame);
-
-			break;
-		} /* end switch */
-
-		return 0;
-	}
-	case VIDIOCGFBUF:
-	{
-		struct video_buffer *vb = arg;
-
-		PDEBUG(4, "VIDIOCGFBUF");
-
-		memset(vb, 0, sizeof(struct video_buffer));
-
-		return 0;
-	}
-	case VIDIOCGUNIT:
-	{
-		struct video_unit *vu = arg;
-
-		PDEBUG(4, "VIDIOCGUNIT");
-
-		memset(vu, 0, sizeof(struct video_unit));
-
-		vu->video = ov->vdev->minor;
-		vu->vbi = VIDEO_NO_UNIT;
-		vu->radio = VIDEO_NO_UNIT;
-		vu->audio = VIDEO_NO_UNIT;
-		vu->teletext = VIDEO_NO_UNIT;
-
-		return 0;
-	}
-	case OV511IOC_WI2C:
-	{
-		struct ov511_i2c_struct *w = arg;
-
-		return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask);
-	}
-	case OV511IOC_RI2C:
-	{
-		struct ov511_i2c_struct *r = arg;
-		int rc;
-
-		rc = i2c_r_slave(ov, r->slave, r->reg);
-		if (rc < 0)
-			return rc;
-
-		r->value = rc;
-		return 0;
-	}
-	default:
-		PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd);
-		return -ENOIOCTLCMD;
-	} /* end switch */
-
-	return 0;
-}
-
-static long
-ov51x_v4l1_ioctl(struct file *file,
-		 unsigned int cmd, unsigned long arg)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-	int rc;
-
-	if (mutex_lock_interruptible(&ov->lock))
-		return -EINTR;
-
-	rc = video_usercopy(file, cmd, arg, ov51x_v4l1_ioctl_internal);
-
-	mutex_unlock(&ov->lock);
-	return rc;
-}
-
-static ssize_t
-ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos)
-{
-	struct video_device *vdev = file->private_data;
-	int noblock = file->f_flags&O_NONBLOCK;
-	unsigned long count = cnt;
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-	int i, rc = 0, frmx = -1;
-	struct ov511_frame *frame;
-
-	if (mutex_lock_interruptible(&ov->lock))
-		return -EINTR;
-
-	PDEBUG(4, "%ld bytes, noblock=%d", count, noblock);
-
-	if (!vdev || !buf) {
-		rc = -EFAULT;
-		goto error;
-	}
-
-	if (!ov->dev) {
-		rc = -EIO;
-		goto error;
-	}
-
-// FIXME: Only supports two frames
-	/* See if a frame is completed, then use it. */
-	if (ov->frame[0].grabstate >= FRAME_DONE)	/* _DONE or _ERROR */
-		frmx = 0;
-	else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */
-		frmx = 1;
-
-	/* If nonblocking we return immediately */
-	if (noblock && (frmx == -1)) {
-		rc = -EAGAIN;
-		goto error;
-	}
-
-	/* If no FRAME_DONE, look for a FRAME_GRABBING state. */
-	/* See if a frame is in process (grabbing), then use it. */
-	if (frmx == -1) {
-		if (ov->frame[0].grabstate == FRAME_GRABBING)
-			frmx = 0;
-		else if (ov->frame[1].grabstate == FRAME_GRABBING)
-			frmx = 1;
-	}
-
-	/* If no frame is active, start one. */
-	if (frmx == -1) {
-		if ((rc = ov51x_new_frame(ov, frmx = 0))) {
-			err("read: ov51x_new_frame error");
-			goto error;
-		}
-	}
-
-	frame = &ov->frame[frmx];
-
-restart:
-	if (!ov->dev) {
-		rc = -EIO;
-		goto error;
-	}
-
-	/* Wait while we're grabbing the image */
-	PDEBUG(4, "Waiting image grabbing");
-	rc = wait_event_interruptible(frame->wq,
-		(frame->grabstate == FRAME_DONE)
-		|| (frame->grabstate == FRAME_ERROR));
-
-	if (rc)
-		goto error;
-
-	PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate);
-	PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd);
-
-	if (frame->grabstate == FRAME_ERROR) {
-		frame->bytes_read = 0;
-		err("** ick! ** Errored frame %d", ov->curframe);
-		if (ov51x_new_frame(ov, frmx)) {
-			err("read: ov51x_new_frame error");
-			goto error;
-		}
-		goto restart;
-	}
-
-
-	/* Repeat until we get a snapshot frame */
-	if (ov->snap_enabled)
-		PDEBUG(4, "Waiting snapshot frame");
-	if (ov->snap_enabled && !frame->snapshot) {
-		frame->bytes_read = 0;
-		if ((rc = ov51x_new_frame(ov, frmx))) {
-			err("read: ov51x_new_frame error");
-			goto error;
-		}
-		goto restart;
-	}
-
-	/* Clear the snapshot */
-	if (ov->snap_enabled && frame->snapshot) {
-		frame->snapshot = 0;
-		ov51x_clear_snapshot(ov);
-	}
-
-	/* Decompression, format conversion, etc... */
-	ov51x_postprocess(ov, frame);
-
-	PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx,
-		frame->bytes_read,
-		get_frame_length(frame));
-
-	/* copy bytes to user space; we allow for partials reads */
-//	if ((count + frame->bytes_read)
-//	    > get_frame_length((struct ov511_frame *)frame))
-//		count = frame->scanlength - frame->bytes_read;
-
-	/* FIXME - count hardwired to be one frame... */
-	count = get_frame_length(frame);
-
-	PDEBUG(4, "Copy to user space: %ld bytes", count);
-	if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) {
-		PDEBUG(4, "Copy failed! %d bytes not copied", i);
-		rc = -EFAULT;
-		goto error;
-	}
-
-	frame->bytes_read += count;
-	PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld",
-		count, frame->bytes_read);
-
-	/* If all data have been read... */
-	if (frame->bytes_read
-	    >= get_frame_length(frame)) {
-		frame->bytes_read = 0;
-
-// FIXME: Only supports two frames
-		/* Mark it as available to be used again. */
-		ov->frame[frmx].grabstate = FRAME_UNUSED;
-		if ((rc = ov51x_new_frame(ov, !frmx))) {
-			err("ov51x_new_frame returned error");
-			goto error;
-		}
-	}
-
-	PDEBUG(4, "read finished, returning %ld (sweet)", count);
-
-	mutex_unlock(&ov->lock);
-	return count;
-
-error:
-	mutex_unlock(&ov->lock);
-	return rc;
-}
-
-static int
-ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *vdev = file->private_data;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end - vma->vm_start;
-	struct usb_ov511 *ov = video_get_drvdata(vdev);
-	unsigned long page, pos;
-
-	if (ov->dev == NULL)
-		return -EIO;
-
-	PDEBUG(4, "mmap: %ld (%lX) bytes", size, size);
-
-	if (size > (((OV511_NUMFRAMES
-		      * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)
-		      + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&ov->lock))
-		return -EINTR;
-
-	pos = (unsigned long)ov->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&ov->lock);
-			return -EAGAIN;
-		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	mutex_unlock(&ov->lock);
-	return 0;
-}
-
-static const struct v4l2_file_operations ov511_fops = {
-	.owner =	THIS_MODULE,
-	.open =		ov51x_v4l1_open,
-	.release =	ov51x_v4l1_close,
-	.read =		ov51x_v4l1_read,
-	.mmap =		ov51x_v4l1_mmap,
-	.ioctl =	ov51x_v4l1_ioctl,
-};
-
-static struct video_device vdev_template = {
-	.name =		"OV511 USB Camera",
-	.fops =		&ov511_fops,
-	.release =	video_device_release,
-};
-
-/****************************************************************************
- *
- * OV511 and sensor configuration
- *
- ***************************************************************************/
-
-/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
- * the same register settings as the OV7610, since they are very similar.
- */
-static int
-ov7xx0_configure(struct usb_ov511 *ov)
-{
-	int i, success;
-	int rc;
-
-	/* Lawrence Glaister <lg@jfm.bc.ca> reports:
-	 *
-	 * Register 0x0f in the 7610 has the following effects:
-	 *
-	 * 0x85 (AEC method 1): Best overall, good contrast range
-	 * 0x45 (AEC method 2): Very overexposed
-	 * 0xa5 (spec sheet default): Ok, but the black level is
-	 *	shifted resulting in loss of contrast
-	 * 0x05 (old driver setting): very overexposed, too much
-	 *	contrast
-	 */
-	static struct ov511_regvals aRegvalsNorm7610[] = {
-		{ OV511_I2C_BUS, 0x10, 0xff },
-		{ OV511_I2C_BUS, 0x16, 0x06 },
-		{ OV511_I2C_BUS, 0x28, 0x24 },
-		{ OV511_I2C_BUS, 0x2b, 0xac },
-		{ OV511_I2C_BUS, 0x12, 0x00 },
-		{ OV511_I2C_BUS, 0x38, 0x81 },
-		{ OV511_I2C_BUS, 0x28, 0x24 },	/* 0c */
-		{ OV511_I2C_BUS, 0x0f, 0x85 },	/* lg's setting */
-		{ OV511_I2C_BUS, 0x15, 0x01 },
-		{ OV511_I2C_BUS, 0x20, 0x1c },
-		{ OV511_I2C_BUS, 0x23, 0x2a },
-		{ OV511_I2C_BUS, 0x24, 0x10 },
-		{ OV511_I2C_BUS, 0x25, 0x8a },
-		{ OV511_I2C_BUS, 0x26, 0xa2 },
-		{ OV511_I2C_BUS, 0x27, 0xc2 },
-		{ OV511_I2C_BUS, 0x2a, 0x04 },
-		{ OV511_I2C_BUS, 0x2c, 0xfe },
-		{ OV511_I2C_BUS, 0x2d, 0x93 },
-		{ OV511_I2C_BUS, 0x30, 0x71 },
-		{ OV511_I2C_BUS, 0x31, 0x60 },
-		{ OV511_I2C_BUS, 0x32, 0x26 },
-		{ OV511_I2C_BUS, 0x33, 0x20 },
-		{ OV511_I2C_BUS, 0x34, 0x48 },
-		{ OV511_I2C_BUS, 0x12, 0x24 },
-		{ OV511_I2C_BUS, 0x11, 0x01 },
-		{ OV511_I2C_BUS, 0x0c, 0x24 },
-		{ OV511_I2C_BUS, 0x0d, 0x24 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	static struct ov511_regvals aRegvalsNorm7620[] = {
-		{ OV511_I2C_BUS, 0x00, 0x00 },
-		{ OV511_I2C_BUS, 0x01, 0x80 },
-		{ OV511_I2C_BUS, 0x02, 0x80 },
-		{ OV511_I2C_BUS, 0x03, 0xc0 },
-		{ OV511_I2C_BUS, 0x06, 0x60 },
-		{ OV511_I2C_BUS, 0x07, 0x00 },
-		{ OV511_I2C_BUS, 0x0c, 0x24 },
-		{ OV511_I2C_BUS, 0x0c, 0x24 },
-		{ OV511_I2C_BUS, 0x0d, 0x24 },
-		{ OV511_I2C_BUS, 0x11, 0x01 },
-		{ OV511_I2C_BUS, 0x12, 0x24 },
-		{ OV511_I2C_BUS, 0x13, 0x01 },
-		{ OV511_I2C_BUS, 0x14, 0x84 },
-		{ OV511_I2C_BUS, 0x15, 0x01 },
-		{ OV511_I2C_BUS, 0x16, 0x03 },
-		{ OV511_I2C_BUS, 0x17, 0x2f },
-		{ OV511_I2C_BUS, 0x18, 0xcf },
-		{ OV511_I2C_BUS, 0x19, 0x06 },
-		{ OV511_I2C_BUS, 0x1a, 0xf5 },
-		{ OV511_I2C_BUS, 0x1b, 0x00 },
-		{ OV511_I2C_BUS, 0x20, 0x18 },
-		{ OV511_I2C_BUS, 0x21, 0x80 },
-		{ OV511_I2C_BUS, 0x22, 0x80 },
-		{ OV511_I2C_BUS, 0x23, 0x00 },
-		{ OV511_I2C_BUS, 0x26, 0xa2 },
-		{ OV511_I2C_BUS, 0x27, 0xea },
-		{ OV511_I2C_BUS, 0x28, 0x20 },
-		{ OV511_I2C_BUS, 0x29, 0x00 },
-		{ OV511_I2C_BUS, 0x2a, 0x10 },
-		{ OV511_I2C_BUS, 0x2b, 0x00 },
-		{ OV511_I2C_BUS, 0x2c, 0x88 },
-		{ OV511_I2C_BUS, 0x2d, 0x91 },
-		{ OV511_I2C_BUS, 0x2e, 0x80 },
-		{ OV511_I2C_BUS, 0x2f, 0x44 },
-		{ OV511_I2C_BUS, 0x60, 0x27 },
-		{ OV511_I2C_BUS, 0x61, 0x02 },
-		{ OV511_I2C_BUS, 0x62, 0x5f },
-		{ OV511_I2C_BUS, 0x63, 0xd5 },
-		{ OV511_I2C_BUS, 0x64, 0x57 },
-		{ OV511_I2C_BUS, 0x65, 0x83 },
-		{ OV511_I2C_BUS, 0x66, 0x55 },
-		{ OV511_I2C_BUS, 0x67, 0x92 },
-		{ OV511_I2C_BUS, 0x68, 0xcf },
-		{ OV511_I2C_BUS, 0x69, 0x76 },
-		{ OV511_I2C_BUS, 0x6a, 0x22 },
-		{ OV511_I2C_BUS, 0x6b, 0x00 },
-		{ OV511_I2C_BUS, 0x6c, 0x02 },
-		{ OV511_I2C_BUS, 0x6d, 0x44 },
-		{ OV511_I2C_BUS, 0x6e, 0x80 },
-		{ OV511_I2C_BUS, 0x6f, 0x1d },
-		{ OV511_I2C_BUS, 0x70, 0x8b },
-		{ OV511_I2C_BUS, 0x71, 0x00 },
-		{ OV511_I2C_BUS, 0x72, 0x14 },
-		{ OV511_I2C_BUS, 0x73, 0x54 },
-		{ OV511_I2C_BUS, 0x74, 0x00 },
-		{ OV511_I2C_BUS, 0x75, 0x8e },
-		{ OV511_I2C_BUS, 0x76, 0x00 },
-		{ OV511_I2C_BUS, 0x77, 0xff },
-		{ OV511_I2C_BUS, 0x78, 0x80 },
-		{ OV511_I2C_BUS, 0x79, 0x80 },
-		{ OV511_I2C_BUS, 0x7a, 0x80 },
-		{ OV511_I2C_BUS, 0x7b, 0xe2 },
-		{ OV511_I2C_BUS, 0x7c, 0x00 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	PDEBUG(4, "starting configuration");
-
-	/* This looks redundant, but is necessary for WebCam 3 */
-	ov->primary_i2c_slave = OV7xx0_SID;
-	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
-		return -1;
-
-	if (init_ov_sensor(ov) >= 0) {
-		PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
-	} else {
-		/* Reset the 76xx */
-		if (i2c_w(ov, 0x12, 0x80) < 0)
-			return -1;
-
-		/* Wait for it to initialize */
-		msleep(150);
-
-		i = 0;
-		success = 0;
-		while (i <= i2c_detect_tries) {
-			if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
-			    (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
-				success = 1;
-				break;
-			} else {
-				i++;
-			}
-		}
-
-// Was (i == i2c_detect_tries) previously. This obviously used to always report
-// success. Whether anyone actually depended on that bug is unknown
-		if ((i >= i2c_detect_tries) && (success == 0)) {
-			err("Failed to read sensor ID. You might not have an");
-			err("OV7610/20, or it may be not responding. Report");
-			err("this to " EMAIL);
-			err("This is only a warning. You can attempt to use");
-			err("your camera anyway");
-// Only issue a warning for now
-//			return -1;
-		} else {
-			PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1);
-		}
-	}
-
-	/* Detect sensor (sub)type */
-	rc = i2c_r(ov, OV7610_REG_COM_I);
-
-	if (rc < 0) {
-		err("Error detecting sensor type");
-		return -1;
-	} else if ((rc & 3) == 3) {
-		dev_info(&ov->dev->dev, "Sensor is an OV7610\n");
-		ov->sensor = SEN_OV7610;
-	} else if ((rc & 3) == 1) {
-		/* I don't know what's different about the 76BE yet. */
-		if (i2c_r(ov, 0x15) & 1)
-			dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n");
-		else
-			dev_info(&ov->dev->dev, "Sensor is an OV76BE\n");
-
-		/* OV511+ will return all zero isoc data unless we
-		 * configure the sensor as a 7620. Someone needs to
-		 * find the exact reg. setting that causes this. */
-		if (ov->bridge == BRG_OV511PLUS) {
-			dev_info(&ov->dev->dev,
-				 "Enabling 511+/7620AE workaround\n");
-			ov->sensor = SEN_OV7620;
-		} else {
-			ov->sensor = SEN_OV76BE;
-		}
-	} else if ((rc & 3) == 0) {
-		dev_info(&ov->dev->dev, "Sensor is an OV7620\n");
-		ov->sensor = SEN_OV7620;
-	} else {
-		err("Unknown image sensor version: %d", rc & 3);
-		return -1;
-	}
-
-	if (ov->sensor == SEN_OV7620) {
-		PDEBUG(4, "Writing 7620 registers");
-		if (write_regvals(ov, aRegvalsNorm7620))
-			return -1;
-	} else {
-		PDEBUG(4, "Writing 7610 registers");
-		if (write_regvals(ov, aRegvalsNorm7610))
-			return -1;
-	}
-
-	/* Set sensor-specific vars */
-	ov->maxwidth = 640;
-	ov->maxheight = 480;
-	ov->minwidth = 64;
-	ov->minheight = 48;
-
-	// FIXME: These do not match the actual settings yet
-	ov->brightness = 0x80 << 8;
-	ov->contrast = 0x80 << 8;
-	ov->colour = 0x80 << 8;
-	ov->hue = 0x80 << 8;
-
-	return 0;
-}
-
-/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
-static int
-ov6xx0_configure(struct usb_ov511 *ov)
-{
-	int rc;
-
-	static struct ov511_regvals aRegvalsNorm6x20[] = {
-		{ OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
-		{ OV511_I2C_BUS, 0x11, 0x01 },
-		{ OV511_I2C_BUS, 0x03, 0x60 },
-		{ OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
-		{ OV511_I2C_BUS, 0x07, 0xa8 },
-		/* The ratio of 0x0c and 0x0d  controls the white point */
-		{ OV511_I2C_BUS, 0x0c, 0x24 },
-		{ OV511_I2C_BUS, 0x0d, 0x24 },
-		{ OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */
-		{ OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */
-		{ OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */
-		{ OV511_I2C_BUS, 0x14, 0x04 },
-		/* 0x16: 0x06 helps frame stability with moving objects */
-		{ OV511_I2C_BUS, 0x16, 0x06 },
-//		{ OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
-		{ OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
-		/* 0x28: 0x05 Selects RGB format if RGB on */
-		{ OV511_I2C_BUS, 0x28, 0x05 },
-		{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
-//		{ OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
-		{ OV511_I2C_BUS, 0x2d, 0x99 },
-		{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
-		{ OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
-		{ OV511_I2C_BUS, 0x38, 0x8b },
-		{ OV511_I2C_BUS, 0x39, 0x40 },
-
-		{ OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
-		{ OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
-		{ OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
-
-		{ OV511_I2C_BUS, 0x3d, 0x80 },
-		/* These next two registers (0x4a, 0x4b) are undocumented. They
-		 * control the color balance */
-		{ OV511_I2C_BUS, 0x4a, 0x80 },
-		{ OV511_I2C_BUS, 0x4b, 0x80 },
-		{ OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */
-		{ OV511_I2C_BUS, 0x4e, 0xc1 },
-		{ OV511_I2C_BUS, 0x4f, 0x04 },
-// Do 50-53 have any effect?
-// Toggle 0x12[2] off and on here?
-		{ OV511_DONE_BUS, 0x0, 0x00 },	/* END MARKER */
-	};
-
-	static struct ov511_regvals aRegvalsNorm6x30[] = {
-	/*OK*/	{ OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
-		{ OV511_I2C_BUS, 0x11, 0x00 },
-	/*OK*/	{ OV511_I2C_BUS, 0x03, 0x60 },
-	/*0A?*/	{ OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
-		{ OV511_I2C_BUS, 0x07, 0xa8 },
-		/* The ratio of 0x0c and 0x0d  controls the white point */
-	/*OK*/	{ OV511_I2C_BUS, 0x0c, 0x24 },
-	/*OK*/	{ OV511_I2C_BUS, 0x0d, 0x24 },
-	/*A*/	{ OV511_I2C_BUS, 0x0e, 0x20 },
-//	/*04?*/	{ OV511_I2C_BUS, 0x14, 0x80 },
-		{ OV511_I2C_BUS, 0x16, 0x03 },
-//	/*OK*/	{ OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
-		// 21 & 22? The suggested values look wrong. Go with default
-	/*A*/	{ OV511_I2C_BUS, 0x23, 0xc0 },
-	/*A*/	{ OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default
-//	/*OK*/	{ OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
-
-		/* 0x28: 0x05 Selects RGB format if RGB on */
-//	/*04?*/	{ OV511_I2C_BUS, 0x28, 0x05 },
-//	/*04?*/	{ OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus
-
-	/*OK*/	{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
-//	/*OK*/	{ OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
-		{ OV511_I2C_BUS, 0x2d, 0x99 },
-//	/*A*/	{ OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620
-//	/*d2?*/	{ OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */
-//	/*8b?*/	{ OV511_I2C_BUS, 0x38, 0x83 },
-//	/*40?*/	{ OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7
-//		{ OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
-//		{ OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
-//		{ OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
-		{ OV511_I2C_BUS, 0x3d, 0x80 },
-//	/*A*/	{ OV511_I2C_BUS, 0x3f, 0x0e },
-
-		/* These next two registers (0x4a, 0x4b) are undocumented. They
-		 * control the color balance */
-//	/*OK?*/	{ OV511_I2C_BUS, 0x4a, 0x80 }, // Check these
-//	/*OK?*/	{ OV511_I2C_BUS, 0x4b, 0x80 },
-		{ OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
-	/*c1?*/	{ OV511_I2C_BUS, 0x4e, 0x40 },
-
-		/* UV average mode, color killer: strongest */
-		{ OV511_I2C_BUS, 0x4f, 0x07 },
-
-		{ OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */
-		{ OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */
-		{ OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */
-		{ OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */
-		{ OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */
-//		{ OV511_I2C_BUS, 0x5c, 0x10 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },	/* END MARKER */
-	};
-
-	PDEBUG(4, "starting sensor configuration");
-
-	if (init_ov_sensor(ov) < 0) {
-		err("Failed to read sensor ID. You might not have an OV6xx0,");
-		err("or it may be not responding. Report this to " EMAIL);
-		return -1;
-	} else {
-		PDEBUG(1, "OV6xx0 sensor detected");
-	}
-
-	/* Detect sensor (sub)type */
-	rc = i2c_r(ov, OV7610_REG_COM_I);
-
-	if (rc < 0) {
-		err("Error detecting sensor type");
-		return -1;
-	}
-
-	if ((rc & 3) == 0) {
-		ov->sensor = SEN_OV6630;
-		dev_info(&ov->dev->dev, "Sensor is an OV6630\n");
-	} else if ((rc & 3) == 1) {
-		ov->sensor = SEN_OV6620;
-		dev_info(&ov->dev->dev, "Sensor is an OV6620\n");
-	} else if ((rc & 3) == 2) {
-		ov->sensor = SEN_OV6630;
-		dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n");
-	} else if ((rc & 3) == 3) {
-		ov->sensor = SEN_OV6630;
-		dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n");
-	}
-
-	/* Set sensor-specific vars */
-	ov->maxwidth = 352;
-	ov->maxheight = 288;
-	ov->minwidth = 64;
-	ov->minheight = 48;
-
-	// FIXME: These do not match the actual settings yet
-	ov->brightness = 0x80 << 8;
-	ov->contrast = 0x80 << 8;
-	ov->colour = 0x80 << 8;
-	ov->hue = 0x80 << 8;
-
-	if (ov->sensor == SEN_OV6620) {
-		PDEBUG(4, "Writing 6x20 registers");
-		if (write_regvals(ov, aRegvalsNorm6x20))
-			return -1;
-	} else {
-		PDEBUG(4, "Writing 6x30 registers");
-		if (write_regvals(ov, aRegvalsNorm6x30))
-			return -1;
-	}
-
-	return 0;
-}
-
-/* This initializes the KS0127 and KS0127B video decoders. */
-static int
-ks0127_configure(struct usb_ov511 *ov)
-{
-	int rc;
-
-// FIXME: I don't know how to sync or reset it yet
-#if 0
-	if (ov51x_init_ks_sensor(ov) < 0) {
-		err("Failed to initialize the KS0127");
-		return -1;
-	} else {
-		PDEBUG(1, "KS012x(B) sensor detected");
-	}
-#endif
-
-	/* Detect decoder subtype */
-	rc = i2c_r(ov, 0x00);
-	if (rc < 0) {
-		err("Error detecting sensor type");
-		return -1;
-	} else if (rc & 0x08) {
-		rc = i2c_r(ov, 0x3d);
-		if (rc < 0) {
-			err("Error detecting sensor type");
-			return -1;
-		} else if ((rc & 0x0f) == 0) {
-			dev_info(&ov->dev->dev, "Sensor is a KS0127\n");
-			ov->sensor = SEN_KS0127;
-		} else if ((rc & 0x0f) == 9) {
-			dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n");
-			ov->sensor = SEN_KS0127B;
-		}
-	} else {
-		err("Error: Sensor is an unsupported KS0122");
-		return -1;
-	}
-
-	/* Set sensor-specific vars */
-	ov->maxwidth = 640;
-	ov->maxheight = 480;
-	ov->minwidth = 64;
-	ov->minheight = 48;
-
-	// FIXME: These do not match the actual settings yet
-	ov->brightness = 0x80 << 8;
-	ov->contrast = 0x80 << 8;
-	ov->colour = 0x80 << 8;
-	ov->hue = 0x80 << 8;
-
-	/* This device is not supported yet. Bail out now... */
-	err("This sensor is not supported yet.");
-	return -1;
-
-	return 0;
-}
-
-/* This initializes the SAA7111A video decoder. */
-static int
-saa7111a_configure(struct usb_ov511 *ov)
-{
-	int rc;
-
-	/* Since there is no register reset command, all registers must be
-	 * written, otherwise gives erratic results */
-	static struct ov511_regvals aRegvalsNormSAA7111A[] = {
-		{ OV511_I2C_BUS, 0x06, 0xce },
-		{ OV511_I2C_BUS, 0x07, 0x00 },
-		{ OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */
-		{ OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */
-		{ OV511_I2C_BUS, 0x00, 0x00 },
-		{ OV511_I2C_BUS, 0x01, 0x00 },
-		{ OV511_I2C_BUS, 0x03, 0x23 },
-		{ OV511_I2C_BUS, 0x04, 0x00 },
-		{ OV511_I2C_BUS, 0x05, 0x00 },
-		{ OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */
-		{ OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */
-		{ OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */
-		{ OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */
-		{ OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */
-		{ OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */
-		{ OV511_I2C_BUS, 0x0f, 0x00 },
-		{ OV511_I2C_BUS, 0x11, 0x0c },
-		{ OV511_I2C_BUS, 0x12, 0x00 },
-		{ OV511_I2C_BUS, 0x13, 0x00 },
-		{ OV511_I2C_BUS, 0x14, 0x00 },
-		{ OV511_I2C_BUS, 0x15, 0x00 },
-		{ OV511_I2C_BUS, 0x16, 0x00 },
-		{ OV511_I2C_BUS, 0x17, 0x00 },
-		{ OV511_I2C_BUS, 0x02, 0xc0 },	/* Composite input 0 */
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-// FIXME: I don't know how to sync or reset it yet
-#if 0
-	if (ov51x_init_saa_sensor(ov) < 0) {
-		err("Failed to initialize the SAA7111A");
-		return -1;
-	} else {
-		PDEBUG(1, "SAA7111A sensor detected");
-	}
-#endif
-
-	/* 640x480 not supported with PAL */
-	if (ov->pal) {
-		ov->maxwidth = 320;
-		ov->maxheight = 240;		/* Even field only */
-	} else {
-		ov->maxwidth = 640;
-		ov->maxheight = 480;		/* Even/Odd fields */
-	}
-
-	ov->minwidth = 320;
-	ov->minheight = 240;		/* Even field only */
-
-	ov->has_decoder = 1;
-	ov->num_inputs = 8;
-	ov->norm = VIDEO_MODE_AUTO;
-	ov->stop_during_set = 0;	/* Decoder guarantees stable image */
-
-	/* Decoder doesn't change these values, so we use these instead of
-	 * acutally reading the registers (which doesn't work) */
-	ov->brightness = 0x80 << 8;
-	ov->contrast = 0x40 << 9;
-	ov->colour = 0x40 << 9;
-	ov->hue = 32768;
-
-	PDEBUG(4, "Writing SAA7111A registers");
-	if (write_regvals(ov, aRegvalsNormSAA7111A))
-		return -1;
-
-	/* Detect version of decoder. This must be done after writing the
-	 * initial regs or the decoder will lock up. */
-	rc = i2c_r(ov, 0x00);
-
-	if (rc < 0) {
-		err("Error detecting sensor version");
-		return -1;
-	} else {
-		dev_info(&ov->dev->dev,
-			 "Sensor is an SAA7111A (version 0x%x)\n", rc);
-		ov->sensor = SEN_SAA7111A;
-	}
-
-	// FIXME: Fix this for OV518(+)
-	/* Latch to negative edge of clock. Otherwise, we get incorrect
-	 * colors and jitter in the digital signal. */
-	if (ov->bclass == BCL_OV511)
-		reg_w(ov, 0x11, 0x00);
-	else
-		dev_warn(&ov->dev->dev,
-			 "SAA7111A not yet supported with OV518/OV518+\n");
-
-	return 0;
-}
-
-/* This initializes the OV511/OV511+ and the sensor */
-static int
-ov511_configure(struct usb_ov511 *ov)
-{
-	static struct ov511_regvals aRegvalsInit511[] = {
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x7f },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x7f },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3f },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3d },
-		{ OV511_DONE_BUS, 0x0, 0x00},
-	};
-
-	static struct ov511_regvals aRegvalsNorm511[] = {
-		{ OV511_REG_BUS, R511_DRAM_FLOW_CTL, 	0x01 },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
-		{ OV511_REG_BUS, R511_FIFO_OPTS,	0x1f },
-		{ OV511_REG_BUS, R511_COMP_EN,		0x00 },
-		{ OV511_REG_BUS, R511_COMP_LUT_EN,	0x03 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	static struct ov511_regvals aRegvalsNorm511Plus[] = {
-		{ OV511_REG_BUS, R511_DRAM_FLOW_CTL,	0xff },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 },
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
-		{ OV511_REG_BUS, R511_FIFO_OPTS,	0xff },
-		{ OV511_REG_BUS, R511_COMP_EN,		0x00 },
-		{ OV511_REG_BUS, R511_COMP_LUT_EN,	0x03 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	PDEBUG(4, "");
-
-	ov->customid = reg_r(ov, R511_SYS_CUST_ID);
-	if (ov->customid < 0) {
-		err("Unable to read camera bridge registers");
-		goto error;
-	}
-
-	PDEBUG (1, "CustomID = %d", ov->customid);
-	ov->desc = symbolic(camlist, ov->customid);
-	dev_info(&ov->dev->dev, "model: %s\n", ov->desc);
-
-	if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) {
-		err("Camera type (%d) not recognized", ov->customid);
-		err("Please notify " EMAIL " of the name,");
-		err("manufacturer, model, and this number of your camera.");
-		err("Also include the output of the detection process.");
-	}
-
-	if (ov->customid == 70)		/* USB Life TV (PAL/SECAM) */
-		ov->pal = 1;
-
-	if (write_regvals(ov, aRegvalsInit511))
-		goto error;
-
-	if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
-		ov51x_led_control(ov, 0);
-
-	/* The OV511+ has undocumented bits in the flow control register.
-	 * Setting it to 0xff fixes the corruption with moving objects. */
-	if (ov->bridge == BRG_OV511) {
-		if (write_regvals(ov, aRegvalsNorm511))
-			goto error;
-	} else if (ov->bridge == BRG_OV511PLUS) {
-		if (write_regvals(ov, aRegvalsNorm511Plus))
-			goto error;
-	} else {
-		err("Invalid bridge");
-	}
-
-	if (ov511_init_compression(ov))
-		goto error;
-
-	ov->packet_numbering = 1;
-	ov511_set_packet_size(ov, 0);
-
-	ov->snap_enabled = snapshot;
-
-	/* Test for 7xx0 */
-	PDEBUG(3, "Testing for 0V7xx0");
-	ov->primary_i2c_slave = OV7xx0_SID;
-	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
-		goto error;
-
-	if (i2c_w(ov, 0x12, 0x80) < 0) {
-		/* Test for 6xx0 */
-		PDEBUG(3, "Testing for 0V6xx0");
-		ov->primary_i2c_slave = OV6xx0_SID;
-		if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
-			goto error;
-
-		if (i2c_w(ov, 0x12, 0x80) < 0) {
-			/* Test for 8xx0 */
-			PDEBUG(3, "Testing for 0V8xx0");
-			ov->primary_i2c_slave = OV8xx0_SID;
-			if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
-				goto error;
-
-			if (i2c_w(ov, 0x12, 0x80) < 0) {
-				/* Test for SAA7111A */
-				PDEBUG(3, "Testing for SAA7111A");
-				ov->primary_i2c_slave = SAA7111A_SID;
-				if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0)
-					goto error;
-
-				if (i2c_w(ov, 0x0d, 0x00) < 0) {
-					/* Test for KS0127 */
-					PDEBUG(3, "Testing for KS0127");
-					ov->primary_i2c_slave = KS0127_SID;
-					if (ov51x_set_slave_ids(ov, KS0127_SID) < 0)
-						goto error;
-
-					if (i2c_w(ov, 0x10, 0x00) < 0) {
-						err("Can't determine sensor slave IDs");
-						goto error;
-					} else {
-						if (ks0127_configure(ov) < 0) {
-							err("Failed to configure KS0127");
-							goto error;
-						}
-					}
-				} else {
-					if (saa7111a_configure(ov) < 0) {
-						err("Failed to configure SAA7111A");
-						goto error;
-					}
-				}
-			} else {
-				err("Detected unsupported OV8xx0 sensor");
-				goto error;
-			}
-		} else {
-			if (ov6xx0_configure(ov) < 0) {
-				err("Failed to configure OV6xx0");
-				goto error;
-			}
-		}
-	} else {
-		if (ov7xx0_configure(ov) < 0) {
-			err("Failed to configure OV7xx0");
-			goto error;
-		}
-	}
-
-	return 0;
-
-error:
-	err("OV511 Config failed");
-
-	return -EBUSY;
-}
-
-/* This initializes the OV518/OV518+ and the sensor */
-static int
-ov518_configure(struct usb_ov511 *ov)
-{
-	/* For 518 and 518+ */
-	static struct ov511_regvals aRegvalsInit518[] = {
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x40 },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3e },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
-		{ OV511_REG_BUS, R51x_SYS_RESET,	0x00 },
-		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
-		{ OV511_REG_BUS, 0x46,			0x00 },
-		{ OV511_REG_BUS, 0x5d,			0x03 },
-		{ OV511_DONE_BUS, 0x0, 0x00},
-	};
-
-	static struct ov511_regvals aRegvalsNorm518[] = {
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 }, /* Reset */
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x01 }, /* Enable */
-		{ OV511_REG_BUS, 0x31, 			0x0f },
-		{ OV511_REG_BUS, 0x5d,			0x03 },
-		{ OV511_REG_BUS, 0x24,			0x9f },
-		{ OV511_REG_BUS, 0x25,			0x90 },
-		{ OV511_REG_BUS, 0x20,			0x00 },
-		{ OV511_REG_BUS, 0x51,			0x04 },
-		{ OV511_REG_BUS, 0x71,			0x19 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	static struct ov511_regvals aRegvalsNorm518Plus[] = {
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 }, /* Reset */
-		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x01 }, /* Enable */
-		{ OV511_REG_BUS, 0x31, 			0x0f },
-		{ OV511_REG_BUS, 0x5d,			0x03 },
-		{ OV511_REG_BUS, 0x24,			0x9f },
-		{ OV511_REG_BUS, 0x25,			0x90 },
-		{ OV511_REG_BUS, 0x20,			0x60 },
-		{ OV511_REG_BUS, 0x51,			0x02 },
-		{ OV511_REG_BUS, 0x71,			0x19 },
-		{ OV511_REG_BUS, 0x40,			0xff },
-		{ OV511_REG_BUS, 0x41,			0x42 },
-		{ OV511_REG_BUS, 0x46,			0x00 },
-		{ OV511_REG_BUS, 0x33,			0x04 },
-		{ OV511_REG_BUS, 0x21,			0x19 },
-		{ OV511_REG_BUS, 0x3f,			0x10 },
-		{ OV511_DONE_BUS, 0x0, 0x00 },
-	};
-
-	PDEBUG(4, "");
-
-	/* First 5 bits of custom ID reg are a revision ID on OV518 */
-	dev_info(&ov->dev->dev, "Device revision %d\n",
-		 0x1F & reg_r(ov, R511_SYS_CUST_ID));
-
-	/* Give it the default description */
-	ov->desc = symbolic(camlist, 0);
-
-	if (write_regvals(ov, aRegvalsInit518))
-		goto error;
-
-	/* Set LED GPIO pin to output mode */
-	if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0)
-		goto error;
-
-	/* LED is off by default with OV518; have to explicitly turn it on */
-	if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
-		ov51x_led_control(ov, 0);
-	else
-		ov51x_led_control(ov, 1);
-
-	/* Don't require compression if dumppix is enabled; otherwise it's
-	 * required. OV518 has no uncompressed mode, to save RAM. */
-	if (!dumppix && !ov->compress) {
-		ov->compress = 1;
-		dev_warn(&ov->dev->dev,
-			 "Compression required with OV518...enabling\n");
-	}
-
-	if (ov->bridge == BRG_OV518) {
-		if (write_regvals(ov, aRegvalsNorm518))
-			goto error;
-	} else if (ov->bridge == BRG_OV518PLUS) {
-		if (write_regvals(ov, aRegvalsNorm518Plus))
-			goto error;
-	} else {
-		err("Invalid bridge");
-	}
-
-	if (reg_w(ov, 0x2f, 0x80) < 0)
-		goto error;
-
-	if (ov518_init_compression(ov))
-		goto error;
-
-	if (ov->bridge == BRG_OV518)
-	{
-		struct usb_interface *ifp;
-		struct usb_host_interface *alt;
-		__u16 mxps = 0;
-
-		ifp = usb_ifnum_to_if(ov->dev, 0);
-		if (ifp) {
-			alt = usb_altnum_to_altsetting(ifp, 7);
-			if (alt)
-				mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
-		}
-
-		/* Some OV518s have packet numbering by default, some don't */
-		if (mxps == 897)
-			ov->packet_numbering = 1;
-		else
-			ov->packet_numbering = 0;
-	} else {
-		/* OV518+ has packet numbering turned on by default */
-		ov->packet_numbering = 1;
-	}
-
-	ov518_set_packet_size(ov, 0);
-
-	ov->snap_enabled = snapshot;
-
-	/* Test for 76xx */
-	ov->primary_i2c_slave = OV7xx0_SID;
-	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
-		goto error;
-
-	/* The OV518 must be more aggressive about sensor detection since
-	 * I2C write will never fail if the sensor is not present. We have
-	 * to try to initialize the sensor to detect its presence */
-
-	if (init_ov_sensor(ov) < 0) {
-		/* Test for 6xx0 */
-		ov->primary_i2c_slave = OV6xx0_SID;
-		if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
-			goto error;
-
-		if (init_ov_sensor(ov) < 0) {
-			/* Test for 8xx0 */
-			ov->primary_i2c_slave = OV8xx0_SID;
-			if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
-				goto error;
-
-			if (init_ov_sensor(ov) < 0) {
-				err("Can't determine sensor slave IDs");
-				goto error;
-			} else {
-				err("Detected unsupported OV8xx0 sensor");
-				goto error;
-			}
-		} else {
-			if (ov6xx0_configure(ov) < 0) {
-				err("Failed to configure OV6xx0");
-				goto error;
-			}
-		}
-	} else {
-		if (ov7xx0_configure(ov) < 0) {
-			err("Failed to configure OV7xx0");
-			goto error;
-		}
-	}
-
-	ov->maxwidth = 352;
-	ov->maxheight = 288;
-
-	// The OV518 cannot go as low as the sensor can
-	ov->minwidth = 160;
-	ov->minheight = 120;
-
-	return 0;
-
-error:
-	err("OV518 Config failed");
-
-	return -EBUSY;
-}
-
-/****************************************************************************
- *  sysfs
- ***************************************************************************/
-
-static inline struct usb_ov511 *cd_to_ov(struct device *cd)
-{
-	struct video_device *vdev = to_video_device(cd);
-	return video_get_drvdata(vdev);
-}
-
-static ssize_t show_custom_id(struct device *cd,
-			      struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	return sprintf(buf, "%d\n", ov->customid);
-}
-static DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
-
-static ssize_t show_model(struct device *cd,
-			  struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	return sprintf(buf, "%s\n", ov->desc);
-}
-static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
-
-static ssize_t show_bridge(struct device *cd,
-			   struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge));
-}
-static DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
-
-static ssize_t show_sensor(struct device *cd,
-			   struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor));
-}
-static DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
-
-static ssize_t show_brightness(struct device *cd,
-			       struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	unsigned short x;
-
-	if (!ov->dev)
-		return -ENODEV;
-	sensor_get_brightness(ov, &x);
-	return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
-
-static ssize_t show_saturation(struct device *cd,
-			       struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	unsigned short x;
-
-	if (!ov->dev)
-		return -ENODEV;
-	sensor_get_saturation(ov, &x);
-	return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
-
-static ssize_t show_contrast(struct device *cd,
-			     struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	unsigned short x;
-
-	if (!ov->dev)
-		return -ENODEV;
-	sensor_get_contrast(ov, &x);
-	return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
-
-static ssize_t show_hue(struct device *cd,
-			struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	unsigned short x;
-
-	if (!ov->dev)
-		return -ENODEV;
-	sensor_get_hue(ov, &x);
-	return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
-
-static ssize_t show_exposure(struct device *cd,
-			     struct device_attribute *attr, char *buf)
-{
-	struct usb_ov511 *ov = cd_to_ov(cd);
-	unsigned char exp = 0;
-
-	if (!ov->dev)
-		return -ENODEV;
-	sensor_get_exposure(ov, &exp);
-	return sprintf(buf, "%d\n", exp);
-}
-static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
-
-static int ov_create_sysfs(struct video_device *vdev)
-{
-	int rc;
-
-	rc = device_create_file(&vdev->dev, &dev_attr_custom_id);
-	if (rc) goto err;
-	rc = device_create_file(&vdev->dev, &dev_attr_model);
-	if (rc) goto err_id;
-	rc = device_create_file(&vdev->dev, &dev_attr_bridge);
-	if (rc) goto err_model;
-	rc = device_create_file(&vdev->dev, &dev_attr_sensor);
-	if (rc) goto err_bridge;
-	rc = device_create_file(&vdev->dev, &dev_attr_brightness);
-	if (rc) goto err_sensor;
-	rc = device_create_file(&vdev->dev, &dev_attr_saturation);
-	if (rc) goto err_bright;
-	rc = device_create_file(&vdev->dev, &dev_attr_contrast);
-	if (rc) goto err_sat;
-	rc = device_create_file(&vdev->dev, &dev_attr_hue);
-	if (rc) goto err_contrast;
-	rc = device_create_file(&vdev->dev, &dev_attr_exposure);
-	if (rc) goto err_hue;
-
-	return 0;
-
-err_hue:
-	device_remove_file(&vdev->dev, &dev_attr_hue);
-err_contrast:
-	device_remove_file(&vdev->dev, &dev_attr_contrast);
-err_sat:
-	device_remove_file(&vdev->dev, &dev_attr_saturation);
-err_bright:
-	device_remove_file(&vdev->dev, &dev_attr_brightness);
-err_sensor:
-	device_remove_file(&vdev->dev, &dev_attr_sensor);
-err_bridge:
-	device_remove_file(&vdev->dev, &dev_attr_bridge);
-err_model:
-	device_remove_file(&vdev->dev, &dev_attr_model);
-err_id:
-	device_remove_file(&vdev->dev, &dev_attr_custom_id);
-err:
-	return rc;
-}
-
-/****************************************************************************
- *  USB routines
- ***************************************************************************/
-
-static int
-ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_interface_descriptor *idesc;
-	struct usb_ov511 *ov;
-	int i, rc, nr;
-
-	PDEBUG(1, "probing for device...");
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	idesc = &intf->cur_altsetting->desc;
-
-	if (idesc->bInterfaceClass != 0xFF)
-		return -ENODEV;
-	if (idesc->bInterfaceSubClass != 0x00)
-		return -ENODEV;
-
-	if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) {
-		err("couldn't kmalloc ov struct");
-		goto error_out;
-	}
-
-	ov->dev = dev;
-	ov->iface = idesc->bInterfaceNumber;
-	ov->led_policy = led;
-	ov->compress = compress;
-	ov->lightfreq = lightfreq;
-	ov->num_inputs = 1;	   /* Video decoder init functs. change this */
-	ov->stop_during_set = !fastset;
-	ov->backlight = backlight;
-	ov->mirror = mirror;
-	ov->auto_brt = autobright;
-	ov->auto_gain = autogain;
-	ov->auto_exp = autoexp;
-
-	switch (le16_to_cpu(dev->descriptor.idProduct)) {
-	case PROD_OV511:
-		ov->bridge = BRG_OV511;
-		ov->bclass = BCL_OV511;
-		break;
-	case PROD_OV511PLUS:
-		ov->bridge = BRG_OV511PLUS;
-		ov->bclass = BCL_OV511;
-		break;
-	case PROD_OV518:
-		ov->bridge = BRG_OV518;
-		ov->bclass = BCL_OV518;
-		break;
-	case PROD_OV518PLUS:
-		ov->bridge = BRG_OV518PLUS;
-		ov->bclass = BCL_OV518;
-		break;
-	case PROD_ME2CAM:
-		if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL)
-			goto error;
-		ov->bridge = BRG_OV511PLUS;
-		ov->bclass = BCL_OV511;
-		break;
-	default:
-		err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct));
-		goto error;
-	}
-
-	dev_info(&intf->dev, "USB %s video device found\n",
-		 symbolic(brglist, ov->bridge));
-
-	init_waitqueue_head(&ov->wq);
-
-	mutex_init(&ov->lock);	/* to 1 == available */
-	mutex_init(&ov->buf_lock);
-	mutex_init(&ov->i2c_lock);
-	mutex_init(&ov->cbuf_lock);
-
-	ov->buf_state = BUF_NOT_ALLOCATED;
-
-	if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) {
-		err("usb_make_path error");
-		goto error;
-	}
-
-	/* Allocate control transfer buffer. */
-	/* Must be kmalloc()'ed, for DMA compatibility */
-	ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL);
-	if (!ov->cbuf)
-		goto error;
-
-	if (ov->bclass == BCL_OV518) {
-		if (ov518_configure(ov) < 0)
-			goto error;
-	} else {
-		if (ov511_configure(ov) < 0)
-			goto error;
-	}
-
-	for (i = 0; i < OV511_NUMFRAMES; i++) {
-		ov->frame[i].framenum = i;
-		init_waitqueue_head(&ov->frame[i].wq);
-	}
-
-	for (i = 0; i < OV511_NUMSBUF; i++) {
-		ov->sbuf[i].ov = ov;
-		spin_lock_init(&ov->sbuf[i].lock);
-		ov->sbuf[i].n = i;
-	}
-
-	/* Unnecessary? (This is done on open(). Need to make sure variables
-	 * are properly initialized without this before removing it, though). */
-	if (ov51x_set_default_params(ov) < 0)
-		goto error;
-
-#ifdef OV511_DEBUG
-	if (dump_bridge) {
-		if (ov->bclass == BCL_OV511)
-			ov511_dump_regs(ov);
-		else
-			ov518_dump_regs(ov);
-	}
-#endif
-
-	ov->vdev = video_device_alloc();
-	if (!ov->vdev)
-		goto error;
-
-	memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev));
-	ov->vdev->parent = &intf->dev;
-	video_set_drvdata(ov->vdev, ov);
-
-	mutex_lock(&ov->lock);
-
-	/* Check to see next free device and mark as used */
-	nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO);
-
-	/* Registers device */
-	if (unit_video[nr] != 0)
-		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER,
-					   unit_video[nr]);
-	else
-		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1);
-
-	if (rc < 0) {
-		err("video_register_device failed");
-		mutex_unlock(&ov->lock);
-		goto error;
-	}
-
-	/* Mark device as used */
-	ov511_devused |= 1 << nr;
-	ov->nr = nr;
-
-	dev_info(&intf->dev, "Device at %s registered to %s\n",
-		 ov->usb_path, video_device_node_name(ov->vdev));
-
-	usb_set_intfdata(intf, ov);
-	if (ov_create_sysfs(ov->vdev)) {
-		err("ov_create_sysfs failed");
-		ov511_devused &= ~(1 << nr);
-		mutex_unlock(&ov->lock);
-		goto error;
-	}
-
-	mutex_unlock(&ov->lock);
-
-	return 0;
-
-error:
-	if (ov->vdev) {
-		if (!video_is_registered(ov->vdev))
-			video_device_release(ov->vdev);
-		else
-			video_unregister_device(ov->vdev);
-		ov->vdev = NULL;
-	}
-
-	if (ov->cbuf) {
-		mutex_lock(&ov->cbuf_lock);
-		kfree(ov->cbuf);
-		ov->cbuf = NULL;
-		mutex_unlock(&ov->cbuf_lock);
-	}
-
-	kfree(ov);
-	ov = NULL;
-
-error_out:
-	err("Camera initialization failed");
-	return -EIO;
-}
-
-static void
-ov51x_disconnect(struct usb_interface *intf)
-{
-	struct usb_ov511 *ov = usb_get_intfdata(intf);
-	int n;
-
-	PDEBUG(3, "");
-
-	mutex_lock(&ov->lock);
-	usb_set_intfdata (intf, NULL);
-
-	/* Free device number */
-	ov511_devused &= ~(1 << ov->nr);
-
-	if (ov->vdev)
-		video_unregister_device(ov->vdev);
-
-	for (n = 0; n < OV511_NUMFRAMES; n++)
-		ov->frame[n].grabstate = FRAME_ERROR;
-
-	ov->curframe = -1;
-
-	/* This will cause the process to request another frame */
-	for (n = 0; n < OV511_NUMFRAMES; n++)
-		wake_up_interruptible(&ov->frame[n].wq);
-
-	wake_up_interruptible(&ov->wq);
-
-	ov->streaming = 0;
-	ov51x_unlink_isoc(ov);
-	mutex_unlock(&ov->lock);
-
-	ov->dev = NULL;
-
-	/* Free the memory */
-	if (!ov->user) {
-		mutex_lock(&ov->cbuf_lock);
-		kfree(ov->cbuf);
-		ov->cbuf = NULL;
-		mutex_unlock(&ov->cbuf_lock);
-
-		ov51x_dealloc(ov);
-		kfree(ov);
-		ov = NULL;
-	}
-
-	PDEBUG(3, "Disconnect complete");
-}
-
-static struct usb_driver ov511_driver = {
-	.name =		"ov511",
-	.id_table =	device_table,
-	.probe =	ov51x_probe,
-	.disconnect =	ov51x_disconnect
-};
-
-/****************************************************************************
- *
- *  Module routines
- *
- ***************************************************************************/
-
-static int __init
-usb_ov511_init(void)
-{
-	int retval;
-
-	retval = usb_register(&ov511_driver);
-	if (retval)
-		goto out;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-out:
-	return retval;
-}
-
-static void __exit
-usb_ov511_exit(void)
-{
-	usb_deregister(&ov511_driver);
-	printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n");
-}
-
-module_init(usb_ov511_init);
-module_exit(usb_ov511_exit);
-
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
deleted file mode 100644
index c450c92468d..00000000000
--- a/drivers/media/video/ov511.h
+++ /dev/null
@@ -1,573 +0,0 @@
-#ifndef __LINUX_OV511_H
-#define __LINUX_OV511_H
-
-#include <asm/uaccess.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-#define OV511_DEBUG	/* Turn on debug messages */
-
-#ifdef OV511_DEBUG
-	#define PDEBUG(level, fmt, args...) \
-		if (debug >= (level))	\
-			printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \
-		__func__, __LINE__ , ## args)
-#else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
-#endif
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { \
-	if ((v) < (mi)) (v) = (mi); \
-	else if ((v) > (ma)) (v) = (ma); \
-}
-
-/* --------------------------------- */
-/* DEFINES FOR OV511 AND OTHER CHIPS */
-/* --------------------------------- */
-
-/* USB IDs */
-#define VEND_OMNIVISION	0x05A9
-#define PROD_OV511	0x0511
-#define PROD_OV511PLUS	0xA511
-#define PROD_OV518	0x0518
-#define PROD_OV518PLUS	0xA518
-
-#define VEND_MATTEL	0x0813
-#define PROD_ME2CAM	0x0002
-
-/* --------------------------------- */
-/*     OV51x REGISTER MNEMONICS      */
-/* --------------------------------- */
-
-/* Camera interface register numbers */
-#define R511_CAM_DELAY		0x10
-#define R511_CAM_EDGE		0x11
-#define R511_CAM_PXCNT		0x12
-#define R511_CAM_LNCNT		0x13
-#define R511_CAM_PXDIV		0x14
-#define R511_CAM_LNDIV		0x15
-#define R511_CAM_UV_EN		0x16
-#define R511_CAM_LINE_MODE	0x17
-#define R511_CAM_OPTS		0x18
-
-/* Snapshot mode camera interface register numbers */
-#define R511_SNAP_FRAME		0x19
-#define R511_SNAP_PXCNT		0x1A
-#define R511_SNAP_LNCNT		0x1B
-#define R511_SNAP_PXDIV		0x1C
-#define R511_SNAP_LNDIV		0x1D
-#define R511_SNAP_UV_EN		0x1E
-#define R511_SNAP_OPTS		0x1F
-
-/* DRAM register numbers */
-#define R511_DRAM_FLOW_CTL	0x20
-#define R511_DRAM_ARCP		0x21
-#define R511_DRAM_MRC		0x22
-#define R511_DRAM_RFC		0x23
-
-/* ISO FIFO register numbers */
-#define R51x_FIFO_PSIZE		0x30	/* 2 bytes wide w/ OV518(+) */
-#define R511_FIFO_OPTS		0x31
-
-/* Parallel IO register numbers */
-#define R511_PIO_OPTS		0x38
-#define R511_PIO_DATA		0x39
-#define R511_PIO_BIST		0x3E
-#define R518_GPIO_IN		0x55	/* OV518(+) only */
-#define R518_GPIO_OUT		0x56	/* OV518(+) only */
-#define R518_GPIO_CTL		0x57	/* OV518(+) only */
-#define R518_GPIO_PULSE_IN	0x58	/* OV518(+) only */
-#define R518_GPIO_PULSE_CLEAR	0x59	/* OV518(+) only */
-#define R518_GPIO_PULSE_POL	0x5a	/* OV518(+) only */
-#define R518_GPIO_PULSE_EN	0x5b	/* OV518(+) only */
-#define R518_GPIO_RESET		0x5c	/* OV518(+) only */
-
-/* I2C registers */
-#define R511_I2C_CTL		0x40
-#define R518_I2C_CTL		0x47	/* OV518(+) only */
-#define R51x_I2C_W_SID		0x41
-#define R51x_I2C_SADDR_3	0x42
-#define R51x_I2C_SADDR_2	0x43
-#define R51x_I2C_R_SID		0x44
-#define R51x_I2C_DATA		0x45
-#define R51x_I2C_CLOCK		0x46
-#define R51x_I2C_TIMEOUT	0x47
-
-/* I2C snapshot registers */
-#define R511_SI2C_SADDR_3	0x48
-#define R511_SI2C_DATA		0x49
-
-/* System control registers */
-#define R51x_SYS_RESET		0x50
-		/* Reset type definitions */
-#define 	OV511_RESET_UDC		0x01
-#define 	OV511_RESET_I2C		0x02
-#define 	OV511_RESET_FIFO	0x04
-#define 	OV511_RESET_OMNICE	0x08
-#define 	OV511_RESET_DRAM	0x10
-#define 	OV511_RESET_CAM_INT	0x20
-#define 	OV511_RESET_OV511	0x40
-#define 	OV511_RESET_NOREGS	0x3F /* All but OV511 & regs */
-#define 	OV511_RESET_ALL		0x7F
-
-#define R511_SYS_CLOCK_DIV	0x51
-#define R51x_SYS_SNAP		0x52
-#define R51x_SYS_INIT         	0x53
-#define R511_SYS_PWR_CLK	0x54 /* OV511+/OV518(+) only */
-#define R511_SYS_LED_CTL	0x55 /* OV511+ only */
-#define R511_SYS_USER		0x5E
-#define R511_SYS_CUST_ID	0x5F
-
-/* OmniCE (compression) registers */
-#define R511_COMP_PHY		0x70
-#define R511_COMP_PHUV		0x71
-#define R511_COMP_PVY		0x72
-#define R511_COMP_PVUV		0x73
-#define R511_COMP_QHY		0x74
-#define R511_COMP_QHUV		0x75
-#define R511_COMP_QVY		0x76
-#define R511_COMP_QVUV		0x77
-#define R511_COMP_EN		0x78
-#define R511_COMP_LUT_EN	0x79
-#define R511_COMP_LUT_BEGIN	0x80
-
-/* --------------------------------- */
-/*         ALTERNATE NUMBERS         */
-/* --------------------------------- */
-
-/* Alternate numbers for various max packet sizes (OV511 only) */
-#define OV511_ALT_SIZE_992	0
-#define OV511_ALT_SIZE_993	1
-#define OV511_ALT_SIZE_768	2
-#define OV511_ALT_SIZE_769	3
-#define OV511_ALT_SIZE_512	4
-#define OV511_ALT_SIZE_513	5
-#define OV511_ALT_SIZE_257	6
-#define OV511_ALT_SIZE_0	7
-
-/* Alternate numbers for various max packet sizes (OV511+ only) */
-#define OV511PLUS_ALT_SIZE_0	0
-#define OV511PLUS_ALT_SIZE_33	1
-#define OV511PLUS_ALT_SIZE_129	2
-#define OV511PLUS_ALT_SIZE_257	3
-#define OV511PLUS_ALT_SIZE_385	4
-#define OV511PLUS_ALT_SIZE_513	5
-#define OV511PLUS_ALT_SIZE_769	6
-#define OV511PLUS_ALT_SIZE_961	7
-
-/* Alternate numbers for various max packet sizes (OV518(+) only) */
-#define OV518_ALT_SIZE_0	0
-#define OV518_ALT_SIZE_128	1
-#define OV518_ALT_SIZE_256	2
-#define OV518_ALT_SIZE_384	3
-#define OV518_ALT_SIZE_512	4
-#define OV518_ALT_SIZE_640	5
-#define OV518_ALT_SIZE_768	6
-#define OV518_ALT_SIZE_896	7
-
-/* --------------------------------- */
-/*     OV7610 REGISTER MNEMONICS     */
-/* --------------------------------- */
-
-/* OV7610 registers */
-#define OV7610_REG_GAIN          0x00	/* gain setting (5:0) */
-#define OV7610_REG_BLUE          0x01	/* blue channel balance */
-#define OV7610_REG_RED           0x02	/* red channel balance */
-#define OV7610_REG_SAT           0x03	/* saturation */
-					/* 04 reserved */
-#define OV7610_REG_CNT           0x05	/* Y contrast */
-#define OV7610_REG_BRT           0x06	/* Y brightness */
-					/* 08-0b reserved */
-#define OV7610_REG_BLUE_BIAS     0x0C	/* blue channel bias (5:0) */
-#define OV7610_REG_RED_BIAS      0x0D	/* read channel bias (5:0) */
-#define OV7610_REG_GAMMA_COEFF   0x0E	/* gamma settings */
-#define OV7610_REG_WB_RANGE      0x0F	/* AEC/ALC/S-AWB settings */
-#define OV7610_REG_EXP           0x10	/* manual exposure setting */
-#define OV7610_REG_CLOCK         0x11	/* polarity/clock prescaler */
-#define OV7610_REG_COM_A         0x12	/* misc common regs */
-#define OV7610_REG_COM_B         0x13	/* misc common regs */
-#define OV7610_REG_COM_C         0x14	/* misc common regs */
-#define OV7610_REG_COM_D         0x15	/* misc common regs */
-#define OV7610_REG_FIELD_DIVIDE  0x16	/* field interval/mode settings */
-#define OV7610_REG_HWIN_START    0x17	/* horizontal window start */
-#define OV7610_REG_HWIN_END      0x18	/* horizontal window end */
-#define OV7610_REG_VWIN_START    0x19	/* vertical window start */
-#define OV7610_REG_VWIN_END      0x1A	/* vertical window end */
-#define OV7610_REG_PIXEL_SHIFT   0x1B	/* pixel shift */
-#define OV7610_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
-#define OV7610_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
-					/* 0e-0f reserved */
-#define OV7610_REG_COM_E         0x20	/* misc common regs */
-#define OV7610_REG_YOFFSET       0x21	/* Y channel offset */
-#define OV7610_REG_UOFFSET       0x22	/* U channel offset */
-					/* 23 reserved */
-#define OV7610_REG_ECW           0x24	/* Exposure white level for AEC */
-#define OV7610_REG_ECB           0x25	/* Exposure black level for AEC */
-#define OV7610_REG_COM_F         0x26	/* misc settings */
-#define OV7610_REG_COM_G         0x27	/* misc settings */
-#define OV7610_REG_COM_H         0x28	/* misc settings */
-#define OV7610_REG_COM_I         0x29	/* misc settings */
-#define OV7610_REG_FRAMERATE_H   0x2A	/* frame rate MSB + misc */
-#define OV7610_REG_FRAMERATE_L   0x2B	/* frame rate LSB */
-#define OV7610_REG_ALC           0x2C	/* Auto Level Control settings */
-#define OV7610_REG_COM_J         0x2D	/* misc settings */
-#define OV7610_REG_VOFFSET       0x2E	/* V channel offset adjustment */
-#define OV7610_REG_ARRAY_BIAS	 0x2F	/* Array bias -- don't change */
-					/* 30-32 reserved */
-#define OV7610_REG_YGAMMA        0x33	/* misc gamma settings (7:6) */
-#define OV7610_REG_BIAS_ADJUST   0x34	/* misc bias settings */
-#define OV7610_REG_COM_L         0x35	/* misc settings */
-					/* 36-37 reserved */
-#define OV7610_REG_COM_K         0x38	/* misc registers */
-
-/* --------------------------------- */
-/*           I2C ADDRESSES           */
-/* --------------------------------- */
-
-#define OV7xx0_SID   0x42
-#define OV6xx0_SID   0xC0
-#define OV8xx0_SID   0xA0
-#define KS0127_SID   0xD8
-#define SAA7111A_SID 0x48
-
-/* --------------------------------- */
-/*       MISCELLANEOUS DEFINES       */
-/* --------------------------------- */
-
-#define I2C_CLOCK_PRESCALER 	0x03
-
-#define FRAMES_PER_DESC		10	/* FIXME - What should this be? */
-#define MAX_FRAME_SIZE_PER_DESC	993	/* For statically allocated stuff */
-#define PIXELS_PER_SEG		256	/* Pixels per segment */
-
-#define OV511_ENDPOINT_ADDRESS	1	/* Isoc endpoint number */
-
-#define OV511_NUMFRAMES	2
-#if OV511_NUMFRAMES > VIDEO_MAX_FRAME
-	#error "OV511_NUMFRAMES is too high"
-#endif
-
-#define OV511_NUMSBUF		2
-
-/* Control transfers use up to 4 bytes */
-#define OV511_CBUF_SIZE		4
-
-/* Size of usb_make_path() buffer */
-#define OV511_USB_PATH_LEN	64
-
-/* Bridge types */
-enum {
-	BRG_UNKNOWN,
-	BRG_OV511,
-	BRG_OV511PLUS,
-	BRG_OV518,
-	BRG_OV518PLUS,
-};
-
-/* Bridge classes */
-enum {
-	BCL_UNKNOWN,
-	BCL_OV511,
-	BCL_OV518,
-};
-
-/* Sensor types */
-enum {
-	SEN_UNKNOWN,
-	SEN_OV76BE,
-	SEN_OV7610,
-	SEN_OV7620,
-	SEN_OV7620AE,
-	SEN_OV6620,
-	SEN_OV6630,
-	SEN_OV6630AE,
-	SEN_OV6630AF,
-	SEN_OV8600,
-	SEN_KS0127,
-	SEN_KS0127B,
-	SEN_SAA7111A,
-};
-
-enum {
-	STATE_SCANNING,		/* Scanning for start */
-	STATE_HEADER,		/* Parsing header */
-	STATE_LINES,		/* Parsing lines */
-};
-
-/* Buffer states */
-enum {
-	BUF_NOT_ALLOCATED,
-	BUF_ALLOCATED,
-};
-
-/* --------- Definition of ioctl interface --------- */
-
-#define OV511_INTERFACE_VER 101
-
-/* LED options */
-enum {
-	LED_OFF,
-	LED_ON,
-	LED_AUTO,
-};
-
-/* Raw frame formats */
-enum {
-	RAWFMT_INVALID,
-	RAWFMT_YUV400,
-	RAWFMT_YUV420,
-	RAWFMT_YUV422,
-	RAWFMT_GBR422,
-};
-
-struct ov511_i2c_struct {
-	unsigned char slave; /* Write slave ID (read ID - 1) */
-	unsigned char reg;   /* Index of register */
-	unsigned char value; /* User sets this w/ write, driver does w/ read */
-	unsigned char mask;  /* Bits to be changed. Not used with read ops */
-};
-
-/* ioctls */
-#define OV511IOC_WI2C     _IOW('v', BASE_VIDIOCPRIVATE + 5, \
-			       struct ov511_i2c_struct)
-#define OV511IOC_RI2C    _IOWR('v', BASE_VIDIOCPRIVATE + 6, \
-			       struct ov511_i2c_struct)
-/* ------------- End IOCTL interface -------------- */
-
-struct usb_ov511;		/* Forward declaration */
-
-struct ov511_sbuf {
-	struct usb_ov511 *ov;
-	unsigned char *data;
-	struct urb *urb;
-	spinlock_t lock;
-	int n;
-};
-
-enum {
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-	FRAME_READY,		/* Ready to start grabbing */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_ERROR,		/* Something bad happened while processing */
-};
-
-struct ov511_regvals {
-	enum {
-		OV511_DONE_BUS,
-		OV511_REG_BUS,
-		OV511_I2C_BUS,
-	} bus;
-	unsigned char reg;
-	unsigned char val;
-};
-
-struct ov511_frame {
-	int framenum;		/* Index of this frame */
-	unsigned char *data;	/* Frame buffer */
-	unsigned char *tempdata; /* Temp buffer for multi-stage conversions */
-	unsigned char *rawdata;	/* Raw camera data buffer */
-	unsigned char *compbuf;	/* Temp buffer for decompressor */
-
-	int depth;		/* Bytes per pixel */
-	int width;		/* Width application is expecting */
-	int height;		/* Height application is expecting */
-
-	int rawwidth;		/* Actual width of frame sent from camera */
-	int rawheight;		/* Actual height of frame sent from camera */
-
-	int sub_flag;		/* Sub-capture mode for this frame? */
-	unsigned int format;	/* Format for this frame */
-	int compressed;		/* Is frame compressed? */
-
-	volatile int grabstate;	/* State of grabbing */
-	int scanstate;		/* State of scanning */
-
-	int bytes_recvd;	/* Number of image bytes received from camera */
-
-	long bytes_read;	/* Amount that has been read() */
-
-	wait_queue_head_t wq;	/* Processes waiting */
-
-	int snapshot;		/* True if frame was a snapshot */
-};
-
-#define DECOMP_INTERFACE_VER 4
-
-/* Compression module operations */
-struct ov51x_decomp_ops {
-	int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *,
-			  int, int, int);
-	int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *,
-			  int, int, int);
-	int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *,
-			  int, int, int);
-	struct module *owner;
-};
-
-struct usb_ov511 {
-	struct video_device *vdev;
-	struct usb_device *dev;
-
-	int customid;
-	char *desc;
-	unsigned char iface;
-	char usb_path[OV511_USB_PATH_LEN];
-
-	/* Determined by sensor type */
-	int maxwidth;
-	int maxheight;
-	int minwidth;
-	int minheight;
-
-	int brightness;
-	int colour;
-	int contrast;
-	int hue;
-	int whiteness;
-	int exposure;
-	int auto_brt;		/* Auto brightness enabled flag */
-	int auto_gain;		/* Auto gain control enabled flag */
-	int auto_exp;		/* Auto exposure enabled flag */
-	int backlight;		/* Backlight exposure algorithm flag */
-	int mirror;		/* Image is reversed horizontally */
-
-	int led_policy;		/* LED: off|on|auto; OV511+ only */
-
-	struct mutex lock;	/* Serializes user-accessible operations */
-	int user;		/* user count for exclusive use */
-
-	int streaming;		/* Are we streaming Isochronous? */
-	int grabbing;		/* Are we grabbing? */
-
-	int compress;		/* Should the next frame be compressed? */
-	int compress_inited;	/* Are compression params uploaded? */
-
-	int lightfreq;		/* Power (lighting) frequency */
-	int bandfilt;		/* Banding filter enabled flag */
-
-	unsigned char *fbuf;	/* Videodev buffer area */
-	unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */
-	unsigned char *rawfbuf;	/* Raw camera data buffer area */
-
-	int sub_flag;		/* Pix Array subcapture on flag */
-	int subx;		/* Pix Array subcapture x offset */
-	int suby;		/* Pix Array subcapture y offset */
-	int subw;		/* Pix Array subcapture width */
-	int subh;		/* Pix Array subcapture height */
-
-	int curframe;		/* Current receiving sbuf */
-	struct ov511_frame frame[OV511_NUMFRAMES];
-
-	struct ov511_sbuf sbuf[OV511_NUMSBUF];
-
-	wait_queue_head_t wq;	/* Processes waiting */
-
-	int snap_enabled;	/* Snapshot mode enabled */
-
-	int bridge;		/* Type of bridge (BRG_*) */
-	int bclass;		/* Class of bridge (BCL_*) */
-	int sensor;		/* Type of image sensor chip (SEN_*) */
-
-	int packet_size;	/* Frame size per isoc desc */
-	int packet_numbering;	/* Is ISO frame numbering enabled? */
-
-	/* Framebuffer/sbuf management */
-	int buf_state;
-	struct mutex buf_lock;
-
-	struct ov51x_decomp_ops *decomp_ops;
-
-	/* Stop streaming while changing picture settings */
-	int stop_during_set;
-
-	int stopped;		/* Streaming is temporarily paused */
-
-	/* Video decoder stuff */
-	int input;		/* Composite, S-VIDEO, etc... */
-	int num_inputs;		/* Number of inputs */
-	int norm; 		/* NTSC / PAL / SECAM */
-	int has_decoder;	/* Device has a video decoder */
-	int pal;		/* Device is designed for PAL resolution */
-
-	/* ov511 device number ID */
-	int nr;			/* Stores a device number */
-
-	/* I2C interface */
-	struct mutex i2c_lock;	  /* Protect I2C controller regs */
-	unsigned char primary_i2c_slave;  /* I2C write id of sensor */
-
-	/* Control transaction stuff */
-	unsigned char *cbuf;		/* Buffer for payload */
-	struct mutex cbuf_lock;
-};
-
-/* Used to represent a list of values and their respective symbolic names */
-struct symbolic_list {
-	int num;
-	char *name;
-};
-
-#define NOT_DEFINED_STR "Unknown"
-
-/* Returns the name of the matching element in the symbolic_list array. The
- * end of the list must be marked with an element that has a NULL name.
- */
-static inline char *
-symbolic(struct symbolic_list list[], int num)
-{
-	int i;
-
-	for (i = 0; list[i].name != NULL; i++)
-			if (list[i].num == num)
-				return (list[i].name);
-
-	return (NOT_DEFINED_STR);
-}
-
-/* Compression stuff */
-
-#define OV511_QUANTABLESIZE	64
-#define OV518_QUANTABLESIZE	32
-
-#define OV511_YQUANTABLE { \
-	0, 1, 1, 2, 2, 3, 3, 4, \
-	1, 1, 1, 2, 2, 3, 4, 4, \
-	1, 1, 2, 2, 3, 4, 4, 4, \
-	2, 2, 2, 3, 4, 4, 4, 4, \
-	2, 2, 3, 4, 4, 5, 5, 5, \
-	3, 3, 4, 4, 5, 5, 5, 5, \
-	3, 4, 4, 4, 5, 5, 5, 5, \
-	4, 4, 4, 4, 5, 5, 5, 5  \
-}
-
-#define OV511_UVQUANTABLE { \
-	0, 2, 2, 3, 4, 4, 4, 4, \
-	2, 2, 2, 4, 4, 4, 4, 4, \
-	2, 2, 3, 4, 4, 4, 4, 4, \
-	3, 4, 4, 4, 4, 4, 4, 4, \
-	4, 4, 4, 4, 4, 4, 4, 4, \
-	4, 4, 4, 4, 4, 4, 4, 4, \
-	4, 4, 4, 4, 4, 4, 4, 4, \
-	4, 4, 4, 4, 4, 4, 4, 4  \
-}
-
-#define OV518_YQUANTABLE { \
-	5, 4, 5, 6, 6, 7, 7, 7, \
-	5, 5, 5, 5, 6, 7, 7, 7, \
-	6, 6, 6, 6, 7, 7, 7, 8, \
-	7, 7, 6, 7, 7, 7, 8, 8  \
-}
-
-#define OV518_UVQUANTABLE { \
-	6, 6, 6, 7, 7, 7, 7, 7, \
-	6, 6, 6, 7, 7, 7, 7, 7, \
-	6, 6, 6, 7, 7, 7, 7, 8, \
-	7, 7, 7, 7, 7, 7, 8, 8  \
-}
-
-#endif
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 7f8ece30c77..25eb5d637ee 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -440,21 +440,21 @@ static const struct regval_list ov772x_vga_regs[] = {
  */
 static const struct ov772x_color_format ov772x_cfmts[] = {
 	{
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_LE,
+		.code		= V4L2_MBUS_FMT_YUYV8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.dsp3		= 0x0,
 		.com3		= SWAP_YUV,
 		.com7		= OFMT_YUV,
 	},
 	{
-		.code		= V4L2_MBUS_FMT_YVYU8_2X8_LE,
+		.code		= V4L2_MBUS_FMT_YVYU8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.dsp3		= UV_ON,
 		.com3		= SWAP_YUV,
 		.com7		= OFMT_YUV,
 	},
 	{
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_BE,
+		.code		= V4L2_MBUS_FMT_UYVY8_2X8,
 		.colorspace	= V4L2_COLORSPACE_JPEG,
 		.dsp3		= 0x0,
 		.com3		= 0x0,
@@ -960,7 +960,7 @@ static int ov772x_g_fmt(struct v4l2_subdev *sd,
 	if (!priv->win || !priv->cfmt) {
 		u32 width = VGA_WIDTH, height = VGA_HEIGHT;
 		int ret = ov772x_set_params(client, &width, &height,
-					    V4L2_MBUS_FMT_YUYV8_2X8_LE);
+					    V4L2_MBUS_FMT_YUYV8_2X8);
 		if (ret < 0)
 			return ret;
 	}
@@ -1092,10 +1092,10 @@ static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
 #endif
 };
 
-static int ov772x_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(ov772x_cfmts))
+	if (index >= ARRAY_SIZE(ov772x_cfmts))
 		return -EINVAL;
 
 	*code = ov772x_cfmts[index].code;
@@ -1159,7 +1159,6 @@ static int ov772x_probe(struct i2c_client *client,
 	ret = ov772x_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -1172,7 +1171,6 @@ static int ov772x_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 36599a65f54..40cdfab74cc 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -155,7 +155,7 @@ static const struct ov9640_reg ov9640_regs_rgb[] = {
 };
 
 static enum v4l2_mbus_pixelcode ov9640_codes[] = {
-	V4L2_MBUS_FMT_YUYV8_2X8_BE,
+	V4L2_MBUS_FMT_UYVY8_2X8,
 	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
 	V4L2_MBUS_FMT_RGB565_2X8_LE,
 };
@@ -430,7 +430,7 @@ static void ov9640_alter_regs(enum v4l2_mbus_pixelcode code,
 {
 	switch (code) {
 	default:
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
 		alt->com12	= OV9640_COM12_YUV_AVG;
 		alt->com13	= OV9640_COM13_Y_DELAY_EN |
 					OV9640_COM13_YUV_DLY(0x01);
@@ -493,7 +493,7 @@ static int ov9640_write_regs(struct i2c_client *client, u32 width,
 	}
 
 	/* select color matrix configuration for given color encoding */
-	if (code == V4L2_MBUS_FMT_YUYV8_2X8_BE) {
+	if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
 		matrix_regs	= ov9640_regs_yuv;
 		matrix_regs_len	= ARRAY_SIZE(ov9640_regs_yuv);
 	} else {
@@ -579,8 +579,8 @@ static int ov9640_s_fmt(struct v4l2_subdev *sd,
 		cspace = V4L2_COLORSPACE_SRGB;
 		break;
 	default:
-		code = V4L2_MBUS_FMT_YUYV8_2X8_BE;
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+		code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
 		cspace = V4L2_COLORSPACE_JPEG;
 	}
 
@@ -606,18 +606,18 @@ static int ov9640_try_fmt(struct v4l2_subdev *sd,
 		mf->colorspace = V4L2_COLORSPACE_SRGB;
 		break;
 	default:
-		mf->code = V4L2_MBUS_FMT_YUYV8_2X8_BE;
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
 		mf->colorspace = V4L2_COLORSPACE_JPEG;
 	}
 
 	return 0;
 }
 
-static int ov9640_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(ov9640_codes))
+	if (index >= ARRAY_SIZE(ov9640_codes))
 		return -EINVAL;
 
 	*code = ov9640_codes[index];
@@ -783,7 +783,6 @@ static int ov9640_probe(struct i2c_client *client,
 
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -794,7 +793,6 @@ static int ov9640_remove(struct i2c_client *client)
 {
 	struct ov9640_priv *priv = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
deleted file mode 100644
index cba4cdf20f4..00000000000
--- a/drivers/media/video/ovcamchip/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-ovcamchip-objs     := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
-		      ov76be.o
-
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
deleted file mode 100644
index c04130dab12..00000000000
--- a/drivers/media/video/ovcamchip/ov6x20.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/* OmniVision OV6620/OV6120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
-#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x20 {
-	int auto_brt;
-	int auto_exp;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-/* Initial values for use with OV511/OV511+ cameras */
-static struct ovcamchip_regvals regvals_init_6x20_511[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x11, 0x01 },
-	{ 0x03, 0x60 },
-	{ 0x05, 0x7f }, /* For when autoadjust is off */
-	{ 0x07, 0xa8 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0x0f, 0x15 }, /* COMS */
-	{ 0x10, 0x75 }, /* AEC Exposure time */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x14, 0x04 },
-	{ 0x16, 0x03 },
-	{ 0x26, 0xb2 }, /* BLC enable */
-	/* 0x28: 0x05 Selects RGB format if RGB on */
-	{ 0x28, 0x05 },
-	{ 0x2a, 0x04 }, /* Disable framerate adjust */
-	{ 0x2d, 0x99 },
-	{ 0x33, 0xa0 }, /* Color Processing Parameter */
-	{ 0x34, 0xd2 }, /* Max A/D range */
-	{ 0x38, 0x8b },
-	{ 0x39, 0x40 },
-
-	{ 0x3c, 0x39 }, /* Enable AEC mode changing */
-	{ 0x3c, 0x3c }, /* Change AEC mode */
-	{ 0x3c, 0x24 }, /* Disable AEC mode changing */
-
-	{ 0x3d, 0x80 },
-	/* These next two registers (0x4a, 0x4b) are undocumented. They
-	 * control the color balance */
-	{ 0x4a, 0x80 },
-	{ 0x4b, 0x80 },
-	{ 0x4d, 0xd2 }, /* This reduces noise a bit */
-	{ 0x4e, 0xc1 },
-	{ 0x4f, 0x04 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Initial values for use with OV518 cameras */
-static struct ovcamchip_regvals regvals_init_6x20_518[] = {
-	{ 0x12, 0x80 }, /* Do a reset */
-	{ 0x03, 0xc0 }, /* Saturation */
-	{ 0x05, 0x8a }, /* Contrast */
-	{ 0x0c, 0x24 }, /* AWB blue */
-	{ 0x0d, 0x24 }, /* AWB red */
-	{ 0x0e, 0x8d }, /* Additional 2x gain */
-	{ 0x0f, 0x25 }, /* Black expanding level = 1.3V */
-	{ 0x11, 0x01 }, /* Clock div. */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x13, 0x01 }, /* (default) */
-	{ 0x14, 0x80 }, /* Set reserved bit 7 */
-	{ 0x15, 0x01 }, /* (default) */
-	{ 0x16, 0x03 }, /* (default) */
-	{ 0x17, 0x38 }, /* (default) */
-	{ 0x18, 0xea }, /* (default) */
-	{ 0x19, 0x04 },
-	{ 0x1a, 0x93 },
-	{ 0x1b, 0x00 }, /* (default) */
-	{ 0x1e, 0xc4 }, /* (default) */
-	{ 0x1f, 0x04 }, /* (default) */
-	{ 0x20, 0x20 }, /* Enable 1st stage aperture correction */
-	{ 0x21, 0x10 }, /* Y offset */
-	{ 0x22, 0x88 }, /* U offset */
-	{ 0x23, 0xc0 }, /* Set XTAL power level */
-	{ 0x24, 0x53 }, /* AEC bright ratio */
-	{ 0x25, 0x7a }, /* AEC black ratio */
-	{ 0x26, 0xb2 }, /* BLC enable */
-	{ 0x27, 0xa2 }, /* Full output range */
-	{ 0x28, 0x01 }, /* (default) */
-	{ 0x29, 0x00 }, /* (default) */
-	{ 0x2a, 0x84 }, /* (default) */
-	{ 0x2b, 0xa8 }, /* Set custom frame rate */
-	{ 0x2c, 0xa0 }, /* (reserved) */
-	{ 0x2d, 0x95 }, /* Enable banding filter */
-	{ 0x2e, 0x88 }, /* V offset */
-	{ 0x33, 0x22 }, /* Luminance gamma on */
-	{ 0x34, 0xc7 }, /* A/D bias */
-	{ 0x36, 0x12 }, /* (reserved) */
-	{ 0x37, 0x63 }, /* (reserved) */
-	{ 0x38, 0x8b }, /* Quick AEC/AEB */
-	{ 0x39, 0x00 }, /* (default) */
-	{ 0x3a, 0x0f }, /* (default) */
-	{ 0x3b, 0x3c }, /* (default) */
-	{ 0x3c, 0x5c }, /* AEC controls */
-	{ 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
-	{ 0x3e, 0x80 }, /* (default) */
-	{ 0x3f, 0x02 }, /* (default) */
-	{ 0x40, 0x10 }, /* (reserved) */
-	{ 0x41, 0x10 }, /* (reserved) */
-	{ 0x42, 0x00 }, /* (reserved) */
-	{ 0x43, 0x7f }, /* (reserved) */
-	{ 0x44, 0x80 }, /* (reserved) */
-	{ 0x45, 0x1c }, /* (reserved) */
-	{ 0x46, 0x1c }, /* (reserved) */
-	{ 0x47, 0x80 }, /* (reserved) */
-	{ 0x48, 0x5f }, /* (reserved) */
-	{ 0x49, 0x00 }, /* (reserved) */
-	{ 0x4a, 0x00 }, /* Color balance (undocumented) */
-	{ 0x4b, 0x80 }, /* Color balance (undocumented) */
-	{ 0x4c, 0x58 }, /* (reserved) */
-	{ 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
-	{ 0x4e, 0xa0 }, /* (default) */
-	{ 0x4f, 0x04 }, /* UV 3-point average */
-	{ 0x50, 0xff }, /* (reserved) */
-	{ 0x51, 0x58 }, /* (reserved) */
-	{ 0x52, 0xc0 }, /* (reserved) */
-	{ 0x53, 0x42 }, /* (reserved) */
-	{ 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
-	{ 0x12, 0x20 },
-	{ 0x12, 0x24 },
-
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV6x20 camera chip and relevant variables. */
-static int ov6x20_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	switch (c->adapter->id) {
-	case I2C_HW_SMBUS_OV511:
-		rc = ov_write_regvals(c, regvals_init_6x20_511);
-		break;
-	case I2C_HW_SMBUS_OV518:
-		rc = ov_write_regvals(c, regvals_init_6x20_518);
-		break;
-	default:
-		dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
-		rc = -ENODEV;
-	}
-
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov6x20_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov6x20_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write(c, REG_CNT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov6x20_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	/******** QCIF-specific regs ********/
-
-	ov_write(c, 0x14, win->quarter?0x24:0x04);
-
-	/******** Palette-specific regs ********/
-
-	/* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
-	if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-		if (win->format == VIDEO_PALETTE_GREY)
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-		else
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		if (win->format == VIDEO_PALETTE_GREY)
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-		else
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	/* The OV6620 needs special handling. This prevents the
-	 * severe banding that normally occurs */
-
-	/* Clock down */
-	ov_write(c, 0x2a, 0x04);
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	ov_write(c, 0x2a, 0x84);
-	/* This next setting is critical. It seems to improve
-	 * the gain or the contrast. The "reserved" bits seem
-	 * to have some effect in this case. */
-	ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
-
-	return 0;
-}
-
-static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov6x20_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 0;
-		vwscale = 0;
-	} else {
-		hwscale = 1;
-		vwscale = 1;	/* The datasheet says 0; it's wrong */
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov6x20_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov6x20_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov6x20_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov6x20_ops = {
-	.init    =	ov6x20_init,
-	.free    =	ov6x20_free,
-	.command =	ov6x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
deleted file mode 100644
index 73b94f51a85..00000000000
--- a/drivers/media/video/ovcamchip/ov6x30.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/* OmniVision OV6630/OV6130 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation [7:3] */
-#define REG_CNT			0x05	/* Y contrast [3:0] */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_SHARP		0x07	/* sharpness */
-#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
-#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x30 {
-	int auto_brt;
-	int auto_exp;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-static struct ovcamchip_regvals regvals_init_6x30[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x00, 0x1f }, /* Gain */
-	{ 0x01, 0x99 }, /* Blue gain */
-	{ 0x02, 0x7c }, /* Red gain */
-	{ 0x03, 0xc0 }, /* Saturation */
-	{ 0x05, 0x0a }, /* Contrast */
-	{ 0x06, 0x95 }, /* Brightness */
-	{ 0x07, 0x2d }, /* Sharpness */
-	{ 0x0c, 0x20 },
-	{ 0x0d, 0x20 },
-	{ 0x0e, 0x20 },
-	{ 0x0f, 0x05 },
-	{ 0x10, 0x9a }, /* "exposure check" */
-	{ 0x11, 0x00 }, /* Pixel clock = fastest */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x13, 0x21 },
-	{ 0x14, 0x80 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x38 },
-	{ 0x18, 0xea },
-	{ 0x19, 0x04 },
-	{ 0x1a, 0x93 },
-	{ 0x1b, 0x00 },
-	{ 0x1e, 0xc4 },
-	{ 0x1f, 0x04 },
-	{ 0x20, 0x20 },
-	{ 0x21, 0x10 },
-	{ 0x22, 0x88 },
-	{ 0x23, 0xc0 }, /* Crystal circuit power level */
-	{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
-	{ 0x26, 0xb2 }, /* BLC enable */
-	{ 0x27, 0xa2 },
-	{ 0x28, 0x00 },
-	{ 0x29, 0x00 },
-	{ 0x2a, 0x84 }, /* (keep) */
-	{ 0x2b, 0xa8 }, /* (keep) */
-	{ 0x2c, 0xa0 },
-	{ 0x2d, 0x95 },	/* Enable auto-brightness */
-	{ 0x2e, 0x88 },
-	{ 0x33, 0x26 },
-	{ 0x34, 0x03 },
-	{ 0x36, 0x8f },
-	{ 0x37, 0x80 },
-	{ 0x38, 0x83 },
-	{ 0x39, 0x80 },
-	{ 0x3a, 0x0f },
-	{ 0x3b, 0x3c },
-	{ 0x3c, 0x1a },
-	{ 0x3d, 0x80 },
-	{ 0x3e, 0x80 },
-	{ 0x3f, 0x0e },
-	{ 0x40, 0x00 }, /* White bal */
-	{ 0x41, 0x00 }, /* White bal */
-	{ 0x42, 0x80 },
-	{ 0x43, 0x3f }, /* White bal */
-	{ 0x44, 0x80 },
-	{ 0x45, 0x20 },
-	{ 0x46, 0x20 },
-	{ 0x47, 0x80 },
-	{ 0x48, 0x7f },
-	{ 0x49, 0x00 },
-	{ 0x4a, 0x00 },
-	{ 0x4b, 0x80 },
-	{ 0x4c, 0xd0 },
-	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
-	{ 0x4e, 0x40 },
-	{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
-	{ 0x50, 0xff },
-	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
-	{ 0x55, 0xff },
-	{ 0x56, 0x12 },
-	{ 0x57, 0x81 }, /* (default) */
-	{ 0x58, 0x75 },
-	{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
-	{ 0x5a, 0x2c },
-	{ 0x5b, 0x0f }, /* AWB chrominance levels */
-	{ 0x5c, 0x10 },
-	{ 0x3d, 0x80 },
-	{ 0x27, 0xa6 },
-	/* Toggle AWB off and on */
-	{ 0x12, 0x20 },
-	{ 0x12, 0x24 },
-
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV6x30 camera chip and relevant variables. */
-static int ov6x30_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_6x30);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov6x30_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov6x30_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov6x30_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = (val & 0x0f) << 12;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	/******** QCIF-specific regs ********/
-
-	ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-			/* Do nothing - we're already in 8-bit mode */
-		} else {
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-		}
-	} else {
-		/* The OV518 needs special treatment. Although both the OV518
-		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
-		 * bus is actually used. The UV bus is tied to ground.
-		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
-		 * output mode */
-
-		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-			/* Do nothing - we want to stay in 8-bit mode */
-			/* Warning: Messing with reg 0x13 breaks OV518 color */
-		} else {
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-		}
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	return 0;
-}
-
-static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov6x30_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 0;
-		vwscale = 0;
-	} else {
-		hwscale = 1;
-		vwscale = 1;	/* The datasheet says 0; it's wrong */
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov6x30_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov6x30_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov6x30_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov6x30_ops = {
-	.init    =	ov6x30_init,
-	.free    =	ov6x30_free,
-	.command =	ov6x30_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
deleted file mode 100644
index 11f6be924d8..00000000000
--- a/drivers/media/video/ovcamchip/ov76be.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* OmniVision OV76BE Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
- * for now. */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue channel balance */
-#define REG_RED			0x02	/* red channel balance */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
-#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
-#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
-#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
-#define REG_EXP			0x10	/* manual exposure setting */
-#define REG_CLOCK		0x11	/* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
-#define REG_HWIN_START		0x17	/* horizontal window start */
-#define REG_HWIN_END		0x18	/* horizontal window end */
-#define REG_VWIN_START		0x19	/* vertical window start */
-#define REG_VWIN_END		0x1A	/* vertical window end */
-#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
-#define REG_YOFFSET		0x21	/* Y channel offset */
-#define REG_UOFFSET		0x22	/* U channel offset */
-#define REG_ECW			0x24	/* exposure white level for AEC */
-#define REG_ECB			0x25	/* exposure black level for AEC */
-#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
-#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
-#define REG_ALC			0x2C	/* Auto Level Control settings */
-#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
-#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
-#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov76be {
-	int auto_brt;
-	int auto_exp;
-	int bandfilt;
-	int mirror;
-};
-
-/* NOTE: These are the same as the 7x10 settings, but should eventually be
- * optimized for the OV76BE */
-static struct ovcamchip_regvals regvals_init_76be[] = {
-	{ 0x10, 0xff },
-	{ 0x16, 0x03 },
-	{ 0x28, 0x24 },
-	{ 0x2b, 0xac },
-	{ 0x12, 0x00 },
-	{ 0x38, 0x81 },
-	{ 0x28, 0x24 },	/* 0c */
-	{ 0x0f, 0x85 },	/* lg's setting */
-	{ 0x15, 0x01 },
-	{ 0x20, 0x1c },
-	{ 0x23, 0x2a },
-	{ 0x24, 0x10 },
-	{ 0x25, 0x8a },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xc2 },
-	{ 0x2a, 0x04 },
-	{ 0x2c, 0xfe },
-	{ 0x2d, 0x93 },
-	{ 0x30, 0x71 },
-	{ 0x31, 0x60 },
-	{ 0x32, 0x26 },
-	{ 0x33, 0x20 },
-	{ 0x34, 0x48 },
-	{ 0x12, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV76be camera chip and relevant variables. */
-static int ov76be_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_76be);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov76be_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov76be_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov76be_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-
-	ov_write(c, 0x14, qvga?0xa4:0x84);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		ov_write_mask(c, 0x0e, 0x40, 0x40);
-		ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		ov_write_mask(c, 0x0e, 0x00, 0x40);
-		ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	/******** Resolution-specific ********/
-
-	if (win->width == 640 && win->height == 480)
-		ov_write(c, 0x35, 0x9e);
-	else
-		ov_write(c, 0x35, 0x1e);
-
-	return 0;
-}
-
-static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov76be_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov76be_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov76be_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov76be_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov76be_ops = {
-	.init    =	ov76be_init,
-	.free    =	ov76be_free,
-	.command =	ov76be_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c
deleted file mode 100644
index 5206e791392..00000000000
--- a/drivers/media/video/ovcamchip/ov7x10.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* OmniVision OV7610/OV7110 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue channel balance */
-#define REG_RED			0x02	/* red channel balance */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
-#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
-#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
-#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
-#define REG_EXP			0x10	/* manual exposure setting */
-#define REG_CLOCK		0x11	/* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
-#define REG_HWIN_START		0x17	/* horizontal window start */
-#define REG_HWIN_END		0x18	/* horizontal window end */
-#define REG_VWIN_START		0x19	/* vertical window start */
-#define REG_VWIN_END		0x1A	/* vertical window end */
-#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
-#define REG_YOFFSET		0x21	/* Y channel offset */
-#define REG_UOFFSET		0x22	/* U channel offset */
-#define REG_ECW			0x24	/* exposure white level for AEC */
-#define REG_ECB			0x25	/* exposure black level for AEC */
-#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
-#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
-#define REG_ALC			0x2C	/* Auto Level Control settings */
-#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
-#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
-#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x10 {
-	int auto_brt;
-	int auto_exp;
-	int bandfilt;
-	int mirror;
-};
-
-/* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- *	shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- *	contrast
- */
-static struct ovcamchip_regvals regvals_init_7x10[] = {
-	{ 0x10, 0xff },
-	{ 0x16, 0x03 },
-	{ 0x28, 0x24 },
-	{ 0x2b, 0xac },
-	{ 0x12, 0x00 },
-	{ 0x38, 0x81 },
-	{ 0x28, 0x24 },	/* 0c */
-	{ 0x0f, 0x85 },	/* lg's setting */
-	{ 0x15, 0x01 },
-	{ 0x20, 0x1c },
-	{ 0x23, 0x2a },
-	{ 0x24, 0x10 },
-	{ 0x25, 0x8a },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xc2 },
-	{ 0x2a, 0x04 },
-	{ 0x2c, 0xfe },
-	{ 0x2d, 0x93 },
-	{ 0x30, 0x71 },
-	{ 0x31, 0x60 },
-	{ 0x32, 0x26 },
-	{ 0x33, 0x20 },
-	{ 0x34, 0x48 },
-	{ 0x12, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV7x10 camera chip and relevant variables. */
-static int ov7x10_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_7x10);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov7x10_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov7x10_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write(c, REG_CNT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x13, 0x10, 0x10);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x13, 0x00, 0x10);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov7x10_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-
-	ov_write(c, 0x14, qvga?0x24:0x04);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		ov_write_mask(c, 0x0e, 0x40, 0x40);
-		ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		ov_write_mask(c, 0x0e, 0x00, 0x40);
-		ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	/******** Resolution-specific ********/
-
-	if (win->width == 640 && win->height == 480)
-		ov_write(c, 0x35, 0x9e);
-	else
-		ov_write(c, 0x35, 0x1e);
-
-	return 0;
-}
-
-static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov7x10_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov7x10_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov7x10_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov7x10_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov7x10_ops = {
-	.init    =	ov7x10_init,
-	.free    =	ov7x10_free,
-	.command =	ov7x10_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c
deleted file mode 100644
index 8e26ae338f3..00000000000
--- a/drivers/media/video/ovcamchip/ov7x20.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/* OmniVision OV7620/OV7120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_SHARP		0x07	/* analog sharpness */
-#define REG_BLUE_BIAS		0x0C	/* WB blue ratio [5:0] */
-#define REG_RED_BIAS		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Default control settings. Values are in terms of V4L2 controls. */
-#define OV7120_DFL_BRIGHT     0x60
-#define OV7620_DFL_BRIGHT     0x60
-#define OV7120_DFL_SAT        0xb0
-#define OV7620_DFL_SAT        0xc0
-#define DFL_AUTO_EXP             1
-#define DFL_AUTO_GAIN            1
-#define OV7120_DFL_GAIN       0x00
-#define OV7620_DFL_GAIN       0x00
-/* NOTE: Since autoexposure is the default, these aren't programmed into the
- * OV7x20 chip. They are just here because V4L2 expects a default */
-#define OV7120_DFL_EXP        0x7f
-#define OV7620_DFL_EXP        0x7f
-
-/* Window parameters */
-#define HWSBASE 0x2F	/* From 7620.SET (spec is wrong) */
-#define HWEBASE 0x2F
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x20 {
-	int auto_brt;
-	int auto_exp;
-	int auto_gain;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-/* Contrast look-up table */
-static unsigned char ctab[] = {
-	0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
-	0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
-};
-
-/* Settings for (Black & White) OV7120 camera chip */
-static struct ovcamchip_regvals regvals_init_7120[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x13, 0x00 }, /* Autoadjust off */
-	{ 0x12, 0x20 }, /* Disable AWB */
-	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */
-	{ 0x00, OV7120_DFL_GAIN },
-	{ 0x01, 0x80 },
-	{ 0x02, 0x80 },
-	{ 0x03, OV7120_DFL_SAT },
-	{ 0x06, OV7120_DFL_BRIGHT },
-	{ 0x07, 0x00 },
-	{ 0x0c, 0x20 },
-	{ 0x0d, 0x20 },
-	{ 0x11, 0x01 },
-	{ 0x14, 0x84 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x2f },
-	{ 0x18, 0xcf },
-	{ 0x19, 0x06 },
-	{ 0x1a, 0xf5 },
-	{ 0x1b, 0x00 },
-	{ 0x20, 0x08 },
-	{ 0x21, 0x80 },
-	{ 0x22, 0x80 },
-	{ 0x23, 0x00 },
-	{ 0x26, 0xa0 },
-	{ 0x27, 0xfa },
-	{ 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */
-	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
-	{ 0x2a, 0x10 },
-	{ 0x2b, 0x00 },
-	{ 0x2c, 0x88 },
-	{ 0x2d, 0x95 },
-	{ 0x2e, 0x80 },
-	{ 0x2f, 0x44 },
-	{ 0x60, 0x20 },
-	{ 0x61, 0x02 },
-	{ 0x62, 0x5f },
-	{ 0x63, 0xd5 },
-	{ 0x64, 0x57 },
-	{ 0x65, 0x83 }, /* OV says "don't change this value" */
-	{ 0x66, 0x55 },
-	{ 0x67, 0x92 },
-	{ 0x68, 0xcf },
-	{ 0x69, 0x76 },
-	{ 0x6a, 0x22 },
-	{ 0x6b, 0xe2 },
-	{ 0x6c, 0x40 },
-	{ 0x6d, 0x48 },
-	{ 0x6e, 0x80 },
-	{ 0x6f, 0x0d },
-	{ 0x70, 0x89 },
-	{ 0x71, 0x00 },
-	{ 0x72, 0x14 },
-	{ 0x73, 0x54 },
-	{ 0x74, 0xa0 },
-	{ 0x75, 0x8e },
-	{ 0x76, 0x00 },
-	{ 0x77, 0xff },
-	{ 0x78, 0x80 },
-	{ 0x79, 0x80 },
-	{ 0x7a, 0x80 },
-	{ 0x7b, 0xe6 },
-	{ 0x7c, 0x00 },
-	{ 0x24, 0x3a },
-	{ 0x25, 0x60 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Settings for (color) OV7620 camera chip */
-static struct ovcamchip_regvals regvals_init_7620[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x00, OV7620_DFL_GAIN },
-	{ 0x01, 0x80 },
-	{ 0x02, 0x80 },
-	{ 0x03, OV7620_DFL_SAT },
-	{ 0x06, OV7620_DFL_BRIGHT },
-	{ 0x07, 0x00 },
-	{ 0x0c, 0x24 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x12, 0x24 },
-	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 },
-	{ 0x14, 0x84 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x2f },
-	{ 0x18, 0xcf },
-	{ 0x19, 0x06 },
-	{ 0x1a, 0xf5 },
-	{ 0x1b, 0x00 },
-	{ 0x20, 0x18 },
-	{ 0x21, 0x80 },
-	{ 0x22, 0x80 },
-	{ 0x23, 0x00 },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xea },
-	{ 0x28, 0x20 },
-	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
-	{ 0x2a, 0x10 },
-	{ 0x2b, 0x00 },
-	{ 0x2c, 0x88 },
-	{ 0x2d, 0x91 },
-	{ 0x2e, 0x80 },
-	{ 0x2f, 0x44 },
-	{ 0x60, 0x27 },
-	{ 0x61, 0x02 },
-	{ 0x62, 0x5f },
-	{ 0x63, 0xd5 },
-	{ 0x64, 0x57 },
-	{ 0x65, 0x83 },
-	{ 0x66, 0x55 },
-	{ 0x67, 0x92 },
-	{ 0x68, 0xcf },
-	{ 0x69, 0x76 },
-	{ 0x6a, 0x22 },
-	{ 0x6b, 0x00 },
-	{ 0x6c, 0x02 },
-	{ 0x6d, 0x44 },
-	{ 0x6e, 0x80 },
-	{ 0x6f, 0x1d },
-	{ 0x70, 0x8b },
-	{ 0x71, 0x00 },
-	{ 0x72, 0x14 },
-	{ 0x73, 0x54 },
-	{ 0x74, 0x00 },
-	{ 0x75, 0x8e },
-	{ 0x76, 0x00 },
-	{ 0x77, 0xff },
-	{ 0x78, 0x80 },
-	{ 0x79, 0x80 },
-	{ 0x7a, 0x80 },
-	{ 0x7b, 0xe2 },
-	{ 0x7c, 0x00 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Returns index into the specified look-up table, with 'n' elements, for which
- * the value is greater than or equal to "val". If a match isn't found, (n-1)
- * is returned. The entries in the table must be in ascending order. */
-static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val)
-{
-	int i = 0;
-
-	while (lut[i] < val && i < n)
-		i++;
-
-	return i;
-}
-
-/* This initializes the OV7x20 camera chip and relevant variables. */
-static int ov7x20_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	if (ov->mono)
-		rc = ov_write_regvals(c, regvals_init_7120);
-	else
-		rc = ov_write_regvals(c, regvals_init_7620);
-
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = DFL_AUTO_EXP;
-	s->auto_gain = DFL_AUTO_GAIN;
-
-	return 0;
-}
-
-static int ov7x20_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov7x20_set_v4l1_control(struct i2c_client *c,
-				   struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-	{
-		/* Use Y gamma control instead. Bit 0 enables it. */
-		rc = ov_write(c, 0x64, ctab[v >> 12]);
-		break;
-	}
-	case OVCAMCHIP_CID_BRIGHT:
-		/* 7620 doesn't like manual changes when in auto mode */
-		if (!s->auto_brt)
-			rc = ov_write(c, REG_BRT, v >> 8);
-		else
-			rc = 0;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		if (!s->auto_exp)
-			rc = ov_write(c, REG_EXP, v);
-		else
-			rc = -EBUSY;
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov7x20_get_v4l1_control(struct i2c_client *c,
-				   struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, 0x64, &val);
-		ctl->value = ov7x20_lut_find(ctab, 16, val) << 12;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-	ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20);
-	ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20);
-	ov_write(c, 0x24, qvga?0x20:0x3a);
-	ov_write(c, 0x25, qvga?0x30:0x60);
-	ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40);
-	if (!ov->mono)
-		ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0);
-	ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20);
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	return 0;
-}
-
-static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov7x20_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov7x20_set_v4l1_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov7x20_get_v4l1_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov7x20_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov7x20_ops = {
-	.init    =	ov7x20_init,
-	.free    =	ov7x20_free,
-	.command =	ov7x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
deleted file mode 100644
index d573d842899..00000000000
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/* Shared Code for OmniVision Camera Chip Drivers
- *
- * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-i2c-drv.h>
-#include "ovcamchip_priv.h"
-
-#define DRIVER_VERSION "v2.27 for Linux 2.6"
-#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>"
-#define DRIVER_DESC "OV camera chip I2C driver"
-
-#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args);
-#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args);
-
-#ifdef DEBUG
-int ovcamchip_debug = 0;
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,
-  "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all");
-#endif
-
-/* By default, let bridge driver tell us if chip is monochrome. mono=0
- * will ignore that and always treat chips as color. mono=1 will force
- * monochrome mode for all chips. */
-static int mono = -1;
-module_param(mono, int, 0);
-MODULE_PARM_DESC(mono,
-  "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)");
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-
-/* Registers common to all chips, that are needed for detection */
-#define GENERIC_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
-#define GENERIC_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
-#define GENERIC_REG_COM_I         0x29	/* misc ID bits */
-
-static char *chip_names[NUM_CC_TYPES] = {
-	[CC_UNKNOWN]	= "Unknown chip",
-	[CC_OV76BE]	= "OV76BE",
-	[CC_OV7610]	= "OV7610",
-	[CC_OV7620]	= "OV7620",
-	[CC_OV7620AE]	= "OV7620AE",
-	[CC_OV6620]	= "OV6620",
-	[CC_OV6630]	= "OV6630",
-	[CC_OV6630AE]	= "OV6630AE",
-	[CC_OV6630AF]	= "OV6630AF",
-};
-
-/* ----------------------------------------------------------------------- */
-
-int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
-{
-	int rc;
-
-	while (rvals->reg != 0xff) {
-		rc = ov_write(c, rvals->reg, rvals->val);
-		if (rc < 0)
-			return rc;
-		rvals++;
-	}
-
-	return 0;
-}
-
-/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-int ov_write_mask(struct i2c_client *c,
-		  unsigned char reg,
-		  unsigned char value,
-		  unsigned char mask)
-{
-	int rc;
-	unsigned char oldval, newval;
-
-	if (mask == 0xff) {
-		newval = value;
-	} else {
-		rc = ov_read(c, reg, &oldval);
-		if (rc < 0)
-			return rc;
-
-		oldval &= (~mask);		/* Clear the masked bits */
-		value &= mask;			/* Enforce mask on value */
-		newval = oldval | value;	/* Set the desired bits */
-	}
-
-	return ov_write(c, reg, newval);
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure.
- */
-static int init_camchip(struct i2c_client *c)
-{
-	int i, success;
-	unsigned char high, low;
-
-	/* Reset the chip */
-	ov_write(c, 0x12, 0x80);
-
-	/* Wait for it to initialize */
-	msleep(150);
-
-	for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) {
-		if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) {
-			if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) {
-				if (high == 0x7F && low == 0xA2) {
-					success = 1;
-					continue;
-				}
-			}
-		}
-
-		/* Reset the chip */
-		ov_write(c, 0x12, 0x80);
-
-		/* Wait for it to initialize */
-		msleep(150);
-
-		/* Dummy read to sync I2C */
-		ov_read(c, 0x00, &low);
-	}
-
-	if (!success)
-		return -EIO;
-
-	PDEBUG(1, "I2C synced in %d attempt(s)", i);
-
-	return 0;
-}
-
-/* This detects the OV7610, OV7620, or OV76BE chip. */
-static int ov7xx0_detect(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int rc;
-	unsigned char val;
-
-	PDEBUG(4, "");
-
-	/* Detect chip (sub)type */
-	rc = ov_read(c, GENERIC_REG_COM_I, &val);
-	if (rc < 0) {
-		PERROR("Error detecting ov7xx0 type");
-		return rc;
-	}
-
-	if ((val & 3) == 3) {
-		PINFO("Camera chip is an OV7610");
-		ov->subtype = CC_OV7610;
-	} else if ((val & 3) == 1) {
-		rc = ov_read(c, 0x15, &val);
-		if (rc < 0) {
-			PERROR("Error detecting ov7xx0 type");
-			return rc;
-		}
-
-		if (val & 1) {
-			PINFO("Camera chip is an OV7620AE");
-			/* OV7620 is a close enough match for now. There are
-			 * some definite differences though, so this should be
-			 * fixed */
-			ov->subtype = CC_OV7620;
-		} else {
-			PINFO("Camera chip is an OV76BE");
-			ov->subtype = CC_OV76BE;
-		}
-	} else if ((val & 3) == 0) {
-		PINFO("Camera chip is an OV7620");
-		ov->subtype = CC_OV7620;
-	} else {
-		PERROR("Unknown camera chip version: %d", val & 3);
-		return -ENOSYS;
-	}
-
-	if (ov->subtype == CC_OV76BE)
-		ov->sops = &ov76be_ops;
-	else if (ov->subtype == CC_OV7620)
-		ov->sops = &ov7x20_ops;
-	else
-		ov->sops = &ov7x10_ops;
-
-	return 0;
-}
-
-/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */
-static int ov6xx0_detect(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int rc;
-	unsigned char val;
-
-	PDEBUG(4, "");
-
-	/* Detect chip (sub)type */
-	rc = ov_read(c, GENERIC_REG_COM_I, &val);
-	if (rc < 0) {
-		PERROR("Error detecting ov6xx0 type");
-		return -1;
-	}
-
-	if ((val & 3) == 0) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630");
-	} else if ((val & 3) == 1) {
-		ov->subtype = CC_OV6620;
-		PINFO("Camera chip is an OV6620");
-	} else if ((val & 3) == 2) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630AE");
-	} else if ((val & 3) == 3) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630AF");
-	}
-
-	if (ov->subtype == CC_OV6620)
-		ov->sops = &ov6x20_ops;
-	else
-		ov->sops = &ov6x30_ops;
-
-	return 0;
-}
-
-static int ovcamchip_detect(struct i2c_client *c)
-{
-	/* Ideally we would just try a single register write and see if it NAKs.
-	 * That isn't possible since the OV518 can't report I2C transaction
-	 * failures. So, we have to try to initialize the chip (i.e. reset it
-	 * and check the ID registers) to detect its presence. */
-
-	/* Test for 7xx0 */
-	PDEBUG(3, "Testing for 0V7xx0");
-	if (init_camchip(c) < 0)
-		return -ENODEV;
-	/* 7-bit addresses with bit 0 set are for the OV7xx0 */
-	if (c->addr & 1) {
-		if (ov7xx0_detect(c) < 0) {
-			PERROR("Failed to init OV7xx0");
-			return -EIO;
-		}
-		return 0;
-	}
-	/* Test for 6xx0 */
-	PDEBUG(3, "Testing for 0V6xx0");
-	if (ov6xx0_detect(c) < 0) {
-		PERROR("Failed to init OV6xx0");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static long ovcamchip_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
-	struct ovcamchip *ov = to_ovcamchip(sd);
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-
-	if (!ov->initialized &&
-	    cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
-	    cmd != OVCAMCHIP_CMD_INITIALIZE) {
-		v4l2_err(sd, "Camera chip not initialized yet!\n");
-		return -EPERM;
-	}
-
-	switch (cmd) {
-	case OVCAMCHIP_CMD_Q_SUBTYPE:
-	{
-		*(int *)arg = ov->subtype;
-		return 0;
-	}
-	case OVCAMCHIP_CMD_INITIALIZE:
-	{
-		int rc;
-
-		if (mono == -1)
-			ov->mono = *(int *)arg;
-		else
-			ov->mono = mono;
-
-		if (ov->mono) {
-			if (ov->subtype != CC_OV7620)
-				v4l2_warn(sd, "Monochrome not "
-					"implemented for this chip\n");
-			else
-				v4l2_info(sd, "Initializing chip as "
-					"monochrome\n");
-		}
-
-		rc = ov->sops->init(c);
-		if (rc < 0)
-			return rc;
-
-		ov->initialized = 1;
-		return 0;
-	}
-	default:
-		return ov->sops->command(c, cmd, arg);
-	}
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops ovcamchip_core_ops = {
-	.ioctl = ovcamchip_ioctl,
-};
-
-static const struct v4l2_subdev_ops ovcamchip_ops = {
-	.core = &ovcamchip_core_ops,
-};
-
-static int ovcamchip_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct ovcamchip *ov;
-	struct v4l2_subdev *sd;
-	int rc = 0;
-
-	ov = kzalloc(sizeof *ov, GFP_KERNEL);
-	if (!ov) {
-		rc = -ENOMEM;
-		goto no_ov;
-	}
-	sd = &ov->sd;
-	v4l2_i2c_subdev_init(sd, client, &ovcamchip_ops);
-
-	rc = ovcamchip_detect(client);
-	if (rc < 0)
-		goto error;
-
-	v4l_info(client, "%s found @ 0x%02x (%s)\n",
-			chip_names[ov->subtype], client->addr << 1, client->adapter->name);
-
-	PDEBUG(1, "Camera chip detection complete");
-
-	return rc;
-error:
-	kfree(ov);
-no_ov:
-	PDEBUG(1, "returning %d", rc);
-	return rc;
-}
-
-static int ovcamchip_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct ovcamchip *ov = to_ovcamchip(sd);
-	int rc;
-
-	v4l2_device_unregister_subdev(sd);
-	rc = ov->sops->free(client);
-	if (rc < 0)
-		return rc;
-
-	kfree(ov);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id ovcamchip_id[] = {
-	{ "ovcamchip", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ovcamchip_id);
-
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
-	.name = "ovcamchip",
-	.probe = ovcamchip_probe,
-	.remove = ovcamchip_remove,
-	.id_table = ovcamchip_id,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
deleted file mode 100644
index 4f07b78c88b..00000000000
--- a/drivers/media/video/ovcamchip/ovcamchip_priv.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* OmniVision* camera chip driver private definitions for core code and
- * chip-specific code
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_PRIV_H
-#define __LINUX_OVCAMCHIP_PRIV_H
-
-#include <linux/i2c.h>
-#include <media/v4l2-subdev.h>
-#include <media/ovcamchip.h>
-
-#ifdef DEBUG
-extern int ovcamchip_debug;
-#endif
-
-#define PDEBUG(level, fmt, args...) \
-	if (ovcamchip_debug >= (level))	pr_debug("[%s:%d] " fmt "\n", \
-		__func__, __LINE__ , ## args)
-
-#define DDEBUG(level, dev, fmt, args...) \
-	if (ovcamchip_debug >= (level))	dev_dbg(dev, "[%s:%d] " fmt "\n", \
-		__func__, __LINE__ , ## args)
-
-/* Number of times to retry chip detection. Increase this if you are getting
- * "Failed to init camera chip" */
-#define I2C_DETECT_RETRIES	10
-
-struct ovcamchip_regvals {
-	unsigned char reg;
-	unsigned char val;
-};
-
-struct ovcamchip_ops {
-	int (*init)(struct i2c_client *);
-	int (*free)(struct i2c_client *);
-	int (*command)(struct i2c_client *, unsigned int, void *);
-};
-
-struct ovcamchip {
-	struct v4l2_subdev sd;
-	struct ovcamchip_ops *sops;
-	void *spriv;               /* Private data for OV7x10.c etc... */
-	int subtype;               /* = SEN_OV7610 etc... */
-	int mono;                  /* Monochrome chip? (invalid until init) */
-	int initialized;           /* OVCAMCHIP_CMD_INITIALIZE was successful */
-};
-
-static inline struct ovcamchip *to_ovcamchip(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct ovcamchip, sd);
-}
-
-extern struct ovcamchip_ops ov6x20_ops;
-extern struct ovcamchip_ops ov6x30_ops;
-extern struct ovcamchip_ops ov7x10_ops;
-extern struct ovcamchip_ops ov7x20_ops;
-extern struct ovcamchip_ops ov76be_ops;
-
-/* --------------------------------- */
-/*              I2C I/O              */
-/* --------------------------------- */
-
-static inline int ov_read(struct i2c_client *c, unsigned char reg,
-			  unsigned char *value)
-{
-	int rc;
-
-	rc = i2c_smbus_read_byte_data(c, reg);
-	*value = (unsigned char) rc;
-	return rc;
-}
-
-static inline int ov_write(struct i2c_client *c, unsigned char reg,
-			   unsigned char value )
-{
-	return i2c_smbus_write_byte_data(c, reg, value);
-}
-
-/* --------------------------------- */
-/*        FUNCTION PROTOTYPES        */
-/* --------------------------------- */
-
-/* Functions in ovcamchip_core.c */
-
-extern int ov_write_regvals(struct i2c_client *c,
-			    struct ovcamchip_regvals *rvals);
-
-extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
-			 unsigned char value, unsigned char mask);
-
-#endif
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 6bc16c13cce..3092abfd66a 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -117,6 +117,7 @@ static const struct pvr2_device_desc pvr2_device_24xxx = {
 static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
 	{ .module_id = PVR2_CLIENT_ID_CX25840 },
 	{ .module_id = PVR2_CLIENT_ID_TUNER },
+	{ .module_id = PVR2_CLIENT_ID_DEMOD },
 };
 
 static const struct pvr2_device_desc pvr2_device_gotview_2 = {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index e5b9594eb5f..273c8d4b385 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -177,6 +177,11 @@ struct pvr2_device_desc {
 	unsigned int flag_has_composite:1;     /* Has composite input */
 	unsigned int flag_has_svideo:1;        /* Has s-video input */
 	unsigned int flag_fx2_16kb:1;          /* 16KB FX2 firmware OK here */
+
+	/* If this driver is considered experimental, i.e. not all aspects
+	   are working correctly and/or it is untested, mark that fact
+	   with this flag. */
+	unsigned int flag_is_experimental:1;
 };
 
 extern struct usb_device_id pvr2_device_table[];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 301ef197d03..70ea578d626 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2459,6 +2459,19 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
 		   hdw,hdw_desc->description);
 	pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
 		hdw_desc->description);
+	if (hdw_desc->flag_is_experimental) {
+		pvr2_trace(PVR2_TRACE_INFO, "**********");
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "WARNING: Support for this device (%s) is"
+			   " experimental.", hdw_desc->description);
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "Important functionality might not be"
+			   " entirely working.");
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "Please consider contacting the driver author to"
+			   " help with further stabilization of the driver.");
+		pvr2_trace(PVR2_TRACE_INFO, "**********");
+	}
 	if (!hdw) goto fail;
 
 	init_timer(&hdw->quiescent_timer);
@@ -3056,14 +3069,14 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw)
 	}
 
 	if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
-		struct v4l2_format fmt;
+		struct v4l2_mbus_framefmt fmt;
 		memset(&fmt, 0, sizeof(fmt));
-		fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		fmt.fmt.pix.width = hdw->res_hor_val;
-		fmt.fmt.pix.height = hdw->res_ver_val;
+		fmt.width = hdw->res_hor_val;
+		fmt.height = hdw->res_ver_val;
+		fmt.code = V4L2_MBUS_FMT_FIXED;
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
-			   fmt.fmt.pix.width, fmt.fmt.pix.height);
-		v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_fmt, &fmt);
+			   fmt.width, fmt.height);
+		v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt);
 	}
 
 	if (hdw->srate_dirty || hdw->force_dirty) {
@@ -4084,12 +4097,20 @@ void pvr2_hdw_device_reset(struct pvr2_hdw *hdw)
 
 void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
 {
-	char da[1];
+	char *da;
 	unsigned int pipe;
 	int ret;
 
 	if (!hdw->usb_dev) return;
 
+	da = kmalloc(16, GFP_KERNEL);
+
+	if (da == NULL) {
+		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+			   "Unable to allocate memory to control CPU reset");
+		return;
+	}
+
 	pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
 
 	da[0] = val ? 0x01 : 0x00;
@@ -4103,6 +4124,8 @@ void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
 			   "cpureset_assert(%d) error=%d",val,ret);
 		pvr2_hdw_render_useless(hdw);
 	}
+
+	kfree(da);
 }
 
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
index b4824782d85..bba6115c9ae 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
@@ -223,7 +223,10 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp)
 				   " pvr2_ioread_setup (setup) id=%p",cp);
 			pvr2_stream_kill(sp);
 			ret = pvr2_stream_set_buffer_count(sp,BUFFER_COUNT);
-			if (ret < 0) return ret;
+			if (ret < 0) {
+				mutex_unlock(&cp->mutex);
+				return ret;
+			}
 			for (idx = 0; idx < BUFFER_COUNT; idx++) {
 				bp = pvr2_stream_get_buffer(sp,idx);
 				pvr2_buffer_set_buffer(bp,
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index eeacd0f6785..2254194aad5 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -153,12 +153,12 @@ static void __exit pvr_exit(void)
 
 	usb_deregister(&pvr_driver);
 
+	pvr2_context_global_done();
+
 #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
 	pvr2_sysfs_class_destroy(class_ptr);
 #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
 
-	pvr2_context_global_done();
-
 	pvr2_trace(PVR2_TRACE_INIT,"pvr_exit complete");
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 71f50565f63..3d7e5aab547 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -74,7 +74,7 @@ struct pvr2_sysfs_ctl_item {
 	int ctl_id;
 	struct pvr2_sysfs *chptr;
 	struct pvr2_sysfs_ctl_item *item_next;
-	struct attribute *attr_gen[7];
+	struct attribute *attr_gen[8];
 	struct attribute_group grp;
 	int created_ok;
 	char name[80];
@@ -511,6 +511,7 @@ static void pvr2_sysfs_release(struct device *class_dev)
 
 static void class_dev_destroy(struct pvr2_sysfs *sfp)
 {
+	struct device *dev;
 	if (!sfp->class_dev) return;
 #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
 	pvr2_sysfs_tear_down_debugifc(sfp);
@@ -542,6 +543,9 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp)
 	}
 	pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
 	dev_set_drvdata(sfp->class_dev, NULL);
+	dev = sfp->class_dev->parent;
+	sfp->class_dev->parent = NULL;
+	put_device(dev);
 	device_unregister(sfp->class_dev);
 	sfp->class_dev = NULL;
 }
@@ -631,10 +635,11 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 	pvr2_sysfs_trace("Creating class_dev id=%p",class_dev);
 
 	class_dev->class = &class_ptr->class;
+
 	dev_set_name(class_dev, "%s",
 		     pvr2_hdw_get_device_identifier(sfp->channel.hdw));
 
-	class_dev->parent = &usb_dev->dev;
+	class_dev->parent = get_device(&usb_dev->dev);
 
 	sfp->class_dev = class_dev;
 	dev_set_drvdata(class_dev, sfp);
@@ -775,7 +780,8 @@ struct pvr2_sysfs_class *pvr2_sysfs_class_create(void)
 	struct pvr2_sysfs_class *clp;
 	clp = kzalloc(sizeof(*clp),GFP_KERNEL);
 	if (!clp) return clp;
-	pvr2_sysfs_trace("Creating pvr2_sysfs_class id=%p",clp);
+	pvr2_sysfs_trace("Creating and registering pvr2_sysfs_class id=%p",
+			 clp);
 	clp->class.name = "pvrusb2";
 	clp->class.class_release = pvr2_sysfs_class_release;
 	clp->class.dev_release = pvr2_sysfs_release;
@@ -791,6 +797,7 @@ struct pvr2_sysfs_class *pvr2_sysfs_class_create(void)
 
 void pvr2_sysfs_class_destroy(struct pvr2_sysfs_class *clp)
 {
+	pvr2_sysfs_trace("Unregistering pvr2_sysfs_class id=%p", clp);
 	class_unregister(&clp->class);
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 5ffa0d2b0b0..aaafa0398fd 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -883,6 +883,17 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 {
 	struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
 	enum pvr2_config cfg = dip->config;
+	char msg[80];
+	unsigned int mcnt;
+
+	/* Construct the unregistration message *before* we actually
+	   perform the unregistration step.  By doing it this way we don't
+	   have to worry about potentially touching deleted resources. */
+	mcnt = scnprintf(msg, sizeof(msg) - 1,
+			 "pvrusb2: unregistered device %s [%s]",
+			 video_device_node_name(&dip->devbase),
+			 pvr2_config_get_name(cfg));
+	msg[mcnt] = 0;
 
 	pvr2_hdw_v4l_store_minor_number(hdw,dip->minor_type,-1);
 
@@ -894,9 +905,7 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 	   are gone. */
 	video_unregister_device(&dip->devbase);
 
-	printk(KERN_INFO "pvrusb2: unregistered device %s [%s]\n",
-	       video_device_node_name(&dip->devbase),
-	       pvr2_config_get_name(cfg));
+	printk(KERN_INFO "%s\n", msg);
 
 }
 
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 7fe70e71865..9de7d59916b 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -276,7 +276,7 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 	 * longer in STATE_QUEUED or STATE_ACTIVE
 	 */
 	videobuf_waiton(&buf->vb, 0, 0);
-	videobuf_dma_unmap(vq, dma);
+	videobuf_dma_unmap(vq->dev, dma);
 	videobuf_dma_free(dma);
 
 	for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) {
@@ -1247,7 +1247,7 @@ static bool pxa_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -1264,7 +1264,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
-		dev_err(dev, "Invalid format code #%d: %d\n", idx, code);
+		dev_err(dev, "Invalid format code #%u: %d\n", idx, code);
 		return 0;
 	}
 
@@ -1284,7 +1284,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 	}
 
 	switch (code) {
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
 		formats++;
 		if (xlate) {
 			xlate->host_fmt	= &pxa_camera_formats[0];
@@ -1293,9 +1293,9 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			dev_dbg(dev, "Providing format %s using code %d\n",
 				pxa_camera_formats[0].name, code);
 		}
-	case V4L2_MBUS_FMT_YVYU8_2X8_BE:
-	case V4L2_MBUS_FMT_YUYV8_2X8_LE:
-	case V4L2_MBUS_FMT_YVYU8_2X8_LE:
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
 	case V4L2_MBUS_FMT_RGB565_2X8_LE:
 	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
 		if (xlate)
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index bbd9c11e2c5..ce78fff2342 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -1,5 +1,5 @@
 /*
- * Driver for RJ54N1CB0C CMOS Image Sensor from Micron
+ * Driver for RJ54N1CB0C CMOS Image Sensor from Sharp
  *
  * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
  *
@@ -127,8 +127,8 @@ static const struct rj54n1_datafmt *rj54n1_find_datafmt(
 }
 
 static const struct rj54n1_datafmt rj54n1_colour_fmts[] = {
-	{V4L2_MBUS_FMT_YUYV8_2X8_LE, V4L2_COLORSPACE_JPEG},
-	{V4L2_MBUS_FMT_YVYU8_2X8_LE, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG},
+	{V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
@@ -481,10 +481,10 @@ static int reg_write_multiple(struct i2c_client *client,
 	return 0;
 }
 
-static int rj54n1_enum_fmt(struct v4l2_subdev *sd, int index,
+static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(rj54n1_colour_fmts))
+	if (index >= ARRAY_SIZE(rj54n1_colour_fmts))
 		return -EINVAL;
 
 	*code = rj54n1_colour_fmts[index].code;
@@ -1046,12 +1046,12 @@ static int rj54n1_s_fmt(struct v4l2_subdev *sd,
 
 	/* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */
 	switch (mf->code) {
-	case V4L2_MBUS_FMT_YUYV8_2X8_LE:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
 		ret = reg_write(client, RJ54N1_OUT_SEL, 0);
 		if (!ret)
 			ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
 		break;
-	case V4L2_MBUS_FMT_YVYU8_2X8_LE:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
 		ret = reg_write(client, RJ54N1_OUT_SEL, 0);
 		if (!ret)
 			ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
@@ -1444,7 +1444,6 @@ static int rj54n1_probe(struct i2c_client *client,
 	ret = rj54n1_video_probe(icd, client, rj54n1_priv);
 	if (ret < 0) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(rj54n1);
 		return ret;
 	}
@@ -1461,7 +1460,6 @@ static int rj54n1_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(rj54n1);
 
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 3c7a79f3812..8ec7c9a45a1 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -191,7 +191,6 @@ struct s2255_bufferi {
 struct s2255_dmaqueue {
 	struct list_head	active;
 	struct s2255_dev	*dev;
-	int			channel;
 };
 
 /* for firmware loading, fw_state */
@@ -226,51 +225,60 @@ struct s2255_pipeinfo {
 };
 
 struct s2255_fmt; /*forward declaration */
+struct s2255_dev;
+
+struct s2255_channel {
+	struct video_device	vdev;
+	int			resources;
+	struct s2255_dmaqueue	vidq;
+	struct s2255_bufferi	buffer;
+	struct s2255_mode	mode;
+	/* jpeg compression */
+	struct v4l2_jpegcompression jc;
+	/* capture parameters (for high quality mode full size) */
+	struct v4l2_captureparm cap_parm;
+	int			cur_frame;
+	int			last_frame;
+
+	int			b_acquire;
+	/* allocated image size */
+	unsigned long		req_image_size;
+	/* received packet size */
+	unsigned long		pkt_size;
+	int			bad_payload;
+	unsigned long		frame_count;
+	/* if JPEG image */
+	int                     jpg_size;
+	/* if channel configured to default state */
+	int                     configured;
+	wait_queue_head_t       wait_setmode;
+	int                     setmode_ready;
+	/* video status items */
+	int                     vidstatus;
+	wait_queue_head_t       wait_vidstatus;
+	int                     vidstatus_ready;
+	unsigned int		width;
+	unsigned int		height;
+	const struct s2255_fmt	*fmt;
+	int idx; /* channel number on device, 0-3 */
+};
+
 
 struct s2255_dev {
-	struct video_device	vdev[MAX_CHANNELS];
+	struct s2255_channel    channel[MAX_CHANNELS];
 	struct v4l2_device 	v4l2_dev;
-	atomic_t                channels; /* number of channels registered */
+	atomic_t                num_channels;
 	int			frames;
 	struct mutex		lock;
 	struct mutex		open_lock;
-	int			resources[MAX_CHANNELS];
 	struct usb_device	*udev;
 	struct usb_interface	*interface;
 	u8			read_endpoint;
-
-	struct s2255_dmaqueue	vidq[MAX_CHANNELS];
 	struct timer_list	timer;
 	struct s2255_fw	*fw_data;
 	struct s2255_pipeinfo	pipe;
-	struct s2255_bufferi	buffer[MAX_CHANNELS];
-	struct s2255_mode	mode[MAX_CHANNELS];
-	/* jpeg compression */
-	struct v4l2_jpegcompression jc[MAX_CHANNELS];
-	/* capture parameters (for high quality mode full size) */
-	struct v4l2_captureparm cap_parm[MAX_CHANNELS];
-	const struct s2255_fmt	*cur_fmt[MAX_CHANNELS];
-	int			cur_frame[MAX_CHANNELS];
-	int			last_frame[MAX_CHANNELS];
 	u32			cc;	/* current channel */
-	int			b_acquire[MAX_CHANNELS];
-	/* allocated image size */
-	unsigned long		req_image_size[MAX_CHANNELS];
-	/* received packet size */
-	unsigned long		pkt_size[MAX_CHANNELS];
-	int			bad_payload[MAX_CHANNELS];
-	unsigned long		frame_count[MAX_CHANNELS];
 	int			frame_ready;
-	/* if JPEG image */
-	int                     jpg_size[MAX_CHANNELS];
-	/* if channel configured to default state */
-	int                     chn_configured[MAX_CHANNELS];
-	wait_queue_head_t       wait_setmode[MAX_CHANNELS];
-	int                     setmode_ready[MAX_CHANNELS];
-	/* video status items */
-	int                     vidstatus[MAX_CHANNELS];
-	wait_queue_head_t       wait_vidstatus[MAX_CHANNELS];
-	int                     vidstatus_ready[MAX_CHANNELS];
 	int                     chn_ready;
 	spinlock_t              slock;
 	/* dsp firmware version (f2255usb.bin) */
@@ -298,16 +306,10 @@ struct s2255_buffer {
 
 struct s2255_fh {
 	struct s2255_dev	*dev;
-	const struct s2255_fmt	*fmt;
-	unsigned int		width;
-	unsigned int		height;
 	struct videobuf_queue	vb_vidq;
 	enum v4l2_buf_type	type;
-	int			channel;
-	/* mode below is the desired mode.
-	   mode in s2255_dev is the current mode that was last set */
-	struct s2255_mode	mode;
-	int			resources[MAX_CHANNELS];
+	struct s2255_channel	*channel;
+	int			resources;
 };
 
 /* current cypress EEPROM firmware version */
@@ -360,12 +362,11 @@ static int *s2255_debug = &debug;
 
 static int s2255_start_readpipe(struct s2255_dev *dev);
 static void s2255_stop_readpipe(struct s2255_dev *dev);
-static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn);
-static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn);
-static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
-			   int chn, int jpgsize);
-static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
-			  struct s2255_mode *mode);
+static int s2255_start_acquire(struct s2255_channel *channel);
+static int s2255_stop_acquire(struct s2255_channel *channel);
+static void s2255_fillbuff(struct s2255_channel *chn, struct s2255_buffer *buf,
+			   int jpgsize);
+static int s2255_set_mode(struct s2255_channel *chan, struct s2255_mode *mode);
 static int s2255_board_shutdown(struct s2255_dev *dev);
 static void s2255_fwload_start(struct s2255_dev *dev, int reset);
 static void s2255_destroy(struct s2255_dev *dev);
@@ -577,10 +578,11 @@ static void s2255_fwchunk_complete(struct urb *urb)
 
 }
 
-static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize)
+static int s2255_got_frame(struct s2255_channel *channel, int jpgsize)
 {
-	struct s2255_dmaqueue *dma_q = &dev->vidq[chn];
+	struct s2255_dmaqueue *dma_q = &channel->vidq;
 	struct s2255_buffer *buf;
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
 	unsigned long flags = 0;
 	int rc = 0;
 	spin_lock_irqsave(&dev->slock, flags);
@@ -593,7 +595,7 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize)
 			 struct s2255_buffer, vb.queue);
 	list_del(&buf->vb.queue);
 	do_gettimeofday(&buf->vb.ts);
-	s2255_fillbuff(dev, buf, dma_q->channel, jpgsize);
+	s2255_fillbuff(channel, buf, jpgsize);
 	wake_up(&buf->vb.done);
 	dprintk(2, "%s: [buf/i] [%p/%d]\n", __func__, buf, buf->vb.i);
 unlock:
@@ -621,8 +623,8 @@ static const struct s2255_fmt *format_by_fourcc(int fourcc)
  *                  http://v4l.videotechnology.com/
  *
  */
-static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
-			   int chn, int jpgsize)
+static void s2255_fillbuff(struct s2255_channel *channel,
+			   struct s2255_buffer *buf, int jpgsize)
 {
 	int pos = 0;
 	struct timeval ts;
@@ -633,12 +635,11 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
 
 	if (!vbuf)
 		return;
-
-	last_frame = dev->last_frame[chn];
+	last_frame = channel->last_frame;
 	if (last_frame != -1) {
-		frm = &dev->buffer[chn].frame[last_frame];
+		frm = &channel->buffer.frame[last_frame];
 		tmpbuf =
-		    (const char *)dev->buffer[chn].frame[last_frame].lpvbits;
+		    (const char *)channel->buffer.frame[last_frame].lpvbits;
 		switch (buf->fmt->fourcc) {
 		case V4L2_PIX_FMT_YUYV:
 		case V4L2_PIX_FMT_UYVY:
@@ -661,7 +662,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
 		default:
 			printk(KERN_DEBUG "s2255: unknown format?\n");
 		}
-		dev->last_frame[chn] = -1;
+		channel->last_frame = -1;
 	} else {
 		printk(KERN_ERR "s2255: =======no frame\n");
 		return;
@@ -671,7 +672,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
 		(unsigned long)vbuf, pos);
 	/* tell v4l buffer was filled */
 
-	buf->vb.field_count = dev->frame_count[chn] * 2;
+	buf->vb.field_count = channel->frame_count * 2;
 	do_gettimeofday(&ts);
 	buf->vb.ts = ts;
 	buf->vb.state = VIDEOBUF_DONE;
@@ -686,8 +687,8 @@ static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
 			unsigned int *size)
 {
 	struct s2255_fh *fh = vq->priv_data;
-
-	*size = fh->width * fh->height * (fh->fmt->depth >> 3);
+	struct s2255_channel *channel = fh->channel;
+	*size = channel->width * channel->height * (channel->fmt->depth >> 3);
 
 	if (0 == *count)
 		*count = S2255_DEF_BUFS;
@@ -710,30 +711,31 @@ static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 			  enum v4l2_field field)
 {
 	struct s2255_fh *fh = vq->priv_data;
+	struct s2255_channel *channel = fh->channel;
 	struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
 	int rc;
+	int w = channel->width;
+	int h = channel->height;
 	dprintk(4, "%s, field=%d\n", __func__, field);
-	if (fh->fmt == NULL)
+	if (channel->fmt == NULL)
 		return -EINVAL;
 
-	if ((fh->width < norm_minw(&fh->dev->vdev[fh->channel])) ||
-	    (fh->width > norm_maxw(&fh->dev->vdev[fh->channel])) ||
-	    (fh->height < norm_minh(&fh->dev->vdev[fh->channel])) ||
-	    (fh->height > norm_maxh(&fh->dev->vdev[fh->channel]))) {
+	if ((w < norm_minw(&channel->vdev)) ||
+	    (w > norm_maxw(&channel->vdev)) ||
+	    (h < norm_minh(&channel->vdev)) ||
+	    (h > norm_maxh(&channel->vdev))) {
 		dprintk(4, "invalid buffer prepare\n");
 		return -EINVAL;
 	}
-
-	buf->vb.size = fh->width * fh->height * (fh->fmt->depth >> 3);
-
+	buf->vb.size = w * h * (channel->fmt->depth >> 3);
 	if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) {
 		dprintk(4, "invalid buffer prepare\n");
 		return -EINVAL;
 	}
 
-	buf->fmt = fh->fmt;
-	buf->vb.width = fh->width;
-	buf->vb.height = fh->height;
+	buf->fmt = channel->fmt;
+	buf->vb.width = w;
+	buf->vb.height = h;
 	buf->vb.field = field;
 
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
@@ -753,8 +755,8 @@ static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 {
 	struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
 	struct s2255_fh *fh = vq->priv_data;
-	struct s2255_dev *dev = fh->dev;
-	struct s2255_dmaqueue *vidq = &dev->vidq[fh->channel];
+	struct s2255_channel *channel = fh->channel;
+	struct s2255_dmaqueue *vidq = &channel->vidq;
 	dprintk(1, "%s\n", __func__);
 	buf->vb.state = VIDEOBUF_QUEUED;
 	list_add_tail(&buf->vb.queue, &vidq->active);
@@ -765,7 +767,7 @@ static void buffer_release(struct videobuf_queue *vq,
 {
 	struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
 	struct s2255_fh *fh = vq->priv_data;
-	dprintk(4, "%s %d\n", __func__, fh->channel);
+	dprintk(4, "%s %d\n", __func__, fh->channel->idx);
 	free_buffer(vq, buf);
 }
 
@@ -777,39 +779,43 @@ static struct videobuf_queue_ops s2255_video_qops = {
 };
 
 
-static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
+static int res_get(struct s2255_fh *fh)
 {
+	struct s2255_dev *dev = fh->dev;
 	/* is it free? */
+	struct s2255_channel *channel = fh->channel;
 	mutex_lock(&dev->lock);
-	if (dev->resources[fh->channel]) {
+	if (channel->resources) {
 		/* no, someone else uses it */
 		mutex_unlock(&dev->lock);
 		return 0;
 	}
 	/* it's free, grab it */
-	dev->resources[fh->channel] = 1;
-	fh->resources[fh->channel] = 1;
+	channel->resources = 1;
+	fh->resources = 1;
 	dprintk(1, "s2255: res: get\n");
 	mutex_unlock(&dev->lock);
 	return 1;
 }
 
-static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
+static int res_locked(struct s2255_fh *fh)
 {
-	return dev->resources[fh->channel];
+	return fh->channel->resources;
 }
 
 static int res_check(struct s2255_fh *fh)
 {
-	return fh->resources[fh->channel];
+	return fh->resources;
 }
 
 
-static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
+static void res_free(struct s2255_fh *fh)
 {
+	struct s2255_channel *channel = fh->channel;
+	struct s2255_dev *dev = fh->dev;
 	mutex_lock(&dev->lock);
-	dev->resources[fh->channel] = 0;
-	fh->resources[fh->channel] = 0;
+	channel->resources = 0;
+	fh->resources = 0;
 	mutex_unlock(&dev->lock);
 	dprintk(1, "res: put\n");
 }
@@ -869,12 +875,13 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 			    struct v4l2_format *f)
 {
 	struct s2255_fh *fh = priv;
+	struct s2255_channel *channel = fh->channel;
 
-	f->fmt.pix.width = fh->width;
-	f->fmt.pix.height = fh->height;
+	f->fmt.pix.width = channel->width;
+	f->fmt.pix.height = channel->height;
 	f->fmt.pix.field = fh->vb_vidq.field;
-	f->fmt.pix.pixelformat = fh->fmt->fourcc;
-	f->fmt.pix.bytesperline = f->fmt.pix.width * (fh->fmt->depth >> 3);
+	f->fmt.pix.pixelformat = channel->fmt->fourcc;
+	f->fmt.pix.bytesperline = f->fmt.pix.width * (channel->fmt->depth >> 3);
 	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
 	return 0;
 }
@@ -886,11 +893,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	enum v4l2_field field;
 	int  b_any_field = 0;
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
+	struct s2255_channel *channel = fh->channel;
 	int is_ntsc;
-
 	is_ntsc =
-	    (dev->vdev[fh->channel].current_norm & V4L2_STD_NTSC) ? 1 : 0;
+		(channel->vdev.current_norm & V4L2_STD_NTSC) ? 1 : 0;
 
 	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
 
@@ -982,8 +988,10 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 			    struct v4l2_format *f)
 {
 	struct s2255_fh *fh = priv;
+	struct s2255_channel *channel = fh->channel;
 	const struct s2255_fmt *fmt;
 	struct videobuf_queue *q = &fh->vb_vidq;
+	struct s2255_mode mode;
 	int ret;
 	int norm;
 
@@ -1005,54 +1013,61 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 		goto out_s_fmt;
 	}
 
-	if (res_locked(fh->dev, fh)) {
+	if (res_locked(fh)) {
 		dprintk(1, "%s: channel busy\n", __func__);
 		ret = -EBUSY;
 		goto out_s_fmt;
 	}
-
-	fh->fmt = fmt;
-	fh->width = f->fmt.pix.width;
-	fh->height = f->fmt.pix.height;
+	mode = channel->mode;
+	channel->fmt = fmt;
+	channel->width = f->fmt.pix.width;
+	channel->height = f->fmt.pix.height;
 	fh->vb_vidq.field = f->fmt.pix.field;
 	fh->type = f->type;
-	norm = norm_minw(&fh->dev->vdev[fh->channel]);
-	if (fh->width > norm_minw(&fh->dev->vdev[fh->channel])) {
-		if (fh->height > norm_minh(&fh->dev->vdev[fh->channel])) {
-			if (fh->dev->cap_parm[fh->channel].capturemode &
+	norm = norm_minw(&channel->vdev);
+	if (channel->width > norm_minw(&channel->vdev)) {
+		if (channel->height > norm_minh(&channel->vdev)) {
+			if (channel->cap_parm.capturemode &
 			    V4L2_MODE_HIGHQUALITY)
-				fh->mode.scale = SCALE_4CIFSI;
+				mode.scale = SCALE_4CIFSI;
 			else
-				fh->mode.scale = SCALE_4CIFS;
+				mode.scale = SCALE_4CIFS;
 		} else
-			fh->mode.scale = SCALE_2CIFS;
+			mode.scale = SCALE_2CIFS;
 
 	} else {
-		fh->mode.scale = SCALE_1CIFS;
+		mode.scale = SCALE_1CIFS;
 	}
-
 	/* color mode */
-	switch (fh->fmt->fourcc) {
+	switch (channel->fmt->fourcc) {
 	case V4L2_PIX_FMT_GREY:
-		fh->mode.color &= ~MASK_COLOR;
-		fh->mode.color |= COLOR_Y8;
+		mode.color &= ~MASK_COLOR;
+		mode.color |= COLOR_Y8;
 		break;
 	case V4L2_PIX_FMT_JPEG:
-		fh->mode.color &= ~MASK_COLOR;
-		fh->mode.color |= COLOR_JPG;
-		fh->mode.color |= (fh->dev->jc[fh->channel].quality << 8);
+		mode.color &= ~MASK_COLOR;
+		mode.color |= COLOR_JPG;
+		mode.color |= (channel->jc.quality << 8);
 		break;
 	case V4L2_PIX_FMT_YUV422P:
-		fh->mode.color &= ~MASK_COLOR;
-		fh->mode.color |= COLOR_YUVPL;
+		mode.color &= ~MASK_COLOR;
+		mode.color |= COLOR_YUVPL;
 		break;
 	case V4L2_PIX_FMT_YUYV:
 	case V4L2_PIX_FMT_UYVY:
 	default:
-		fh->mode.color &= ~MASK_COLOR;
-		fh->mode.color |= COLOR_YUVPK;
+		mode.color &= ~MASK_COLOR;
+		mode.color |= COLOR_YUVPK;
 		break;
 	}
+	if ((mode.color & MASK_COLOR) != (channel->mode.color & MASK_COLOR))
+		mode.restart = 1;
+	else if (mode.scale != channel->mode.scale)
+		mode.restart = 1;
+	else if (mode.format != channel->mode.format)
+		mode.restart = 1;
+	channel->mode = mode;
+	(void) s2255_set_mode(channel, &mode);
 	ret = 0;
 out_s_fmt:
 	mutex_unlock(&q->vb_lock);
@@ -1197,26 +1212,27 @@ static void s2255_print_cfg(struct s2255_dev *sdev, struct s2255_mode *mode)
  * When the restart parameter is set, we sleep for ONE frame to allow the
  * DSP time to get the new frame
  */
-static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
+static int s2255_set_mode(struct s2255_channel *channel,
 			  struct s2255_mode *mode)
 {
 	int res;
 	__le32 *buffer;
 	unsigned long chn_rev;
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
 	mutex_lock(&dev->lock);
-	chn_rev = G_chnmap[chn];
-	dprintk(3, "%s channel %lu\n", __func__, chn);
+	chn_rev = G_chnmap[channel->idx];
+	dprintk(3, "%s channel: %d\n", __func__, channel->idx);
 	/* if JPEG, set the quality */
 	if ((mode->color & MASK_COLOR) == COLOR_JPG) {
 		mode->color &= ~MASK_COLOR;
 		mode->color |= COLOR_JPG;
 		mode->color &= ~MASK_JPG_QUALITY;
-		mode->color |= (dev->jc[chn].quality << 8);
+		mode->color |= (channel->jc.quality << 8);
 	}
 	/* save the mode */
-	dev->mode[chn] = *mode;
-	dev->req_image_size[chn] = get_transfer_size(mode);
-	dprintk(1, "%s: reqsize %ld\n", __func__, dev->req_image_size[chn]);
+	channel->mode = *mode;
+	channel->req_image_size = get_transfer_size(mode);
+	dprintk(1, "%s: reqsize %ld\n", __func__, channel->req_image_size);
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
@@ -1227,38 +1243,38 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
 	buffer[0] = IN_DATA_TOKEN;
 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 	buffer[2] = CMD_SET_MODE;
-	memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
-	dev->setmode_ready[chn] = 0;
+	memcpy(&buffer[3], &channel->mode, sizeof(struct s2255_mode));
+	channel->setmode_ready = 0;
 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 	if (debug)
 		s2255_print_cfg(dev, mode);
 	kfree(buffer);
 	/* wait at least 3 frames before continuing */
 	if (mode->restart) {
-		wait_event_timeout(dev->wait_setmode[chn],
-				   (dev->setmode_ready[chn] != 0),
+		wait_event_timeout(channel->wait_setmode,
+				   (channel->setmode_ready != 0),
 				   msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
-		if (dev->setmode_ready[chn] != 1) {
+		if (channel->setmode_ready != 1) {
 			printk(KERN_DEBUG "s2255: no set mode response\n");
 			res = -EFAULT;
 		}
 	}
 	/* clear the restart flag */
-	dev->mode[chn].restart = 0;
+	channel->mode.restart = 0;
 	mutex_unlock(&dev->lock);
-	dprintk(1, "%s chn %lu, result: %d\n", __func__, chn, res);
+	dprintk(1, "%s chn %d, result: %d\n", __func__, channel->idx, res);
 	return res;
 }
 
-static int s2255_cmd_status(struct s2255_dev *dev, unsigned long chn,
-			    u32 *pstatus)
+static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus)
 {
 	int res;
 	__le32 *buffer;
 	u32 chn_rev;
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
 	mutex_lock(&dev->lock);
-	chn_rev = G_chnmap[chn];
-	dprintk(4, "%s chan %lu\n", __func__, chn);
+	chn_rev = G_chnmap[channel->idx];
+	dprintk(4, "%s chan %d\n", __func__, channel->idx);
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
@@ -1270,17 +1286,17 @@ static int s2255_cmd_status(struct s2255_dev *dev, unsigned long chn,
 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 	buffer[2] = CMD_STATUS;
 	*pstatus = 0;
-	dev->vidstatus_ready[chn] = 0;
+	channel->vidstatus_ready = 0;
 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 	kfree(buffer);
-	wait_event_timeout(dev->wait_vidstatus[chn],
-			   (dev->vidstatus_ready[chn] != 0),
+	wait_event_timeout(channel->wait_vidstatus,
+			   (channel->vidstatus_ready != 0),
 			   msecs_to_jiffies(S2255_VIDSTATUS_TIMEOUT));
-	if (dev->vidstatus_ready[chn] != 1) {
+	if (channel->vidstatus_ready != 1) {
 		printk(KERN_DEBUG "s2255: no vidstatus response\n");
 		res = -EFAULT;
 	}
-	*pstatus = dev->vidstatus[chn];
+	*pstatus = channel->vidstatus;
 	dprintk(4, "%s, vid status %d\n", __func__, *pstatus);
 	mutex_unlock(&dev->lock);
 	return res;
@@ -1291,9 +1307,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 	int res;
 	struct s2255_fh *fh = priv;
 	struct s2255_dev *dev = fh->dev;
-	struct s2255_mode *new_mode;
-	struct s2255_mode *old_mode;
-	int chn;
+	struct s2255_channel *channel = fh->channel;
 	int j;
 	dprintk(4, "%s\n", __func__);
 	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
@@ -1305,51 +1319,32 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 		return -EINVAL;
 	}
 
-	if (!res_get(dev, fh)) {
+	if (!res_get(fh)) {
 		s2255_dev_err(&dev->udev->dev, "stream busy\n");
 		return -EBUSY;
 	}
-
-	/* send a set mode command everytime with restart.
-	   in case we switch resolutions or other parameters */
-	chn = fh->channel;
-	new_mode = &fh->mode;
-	old_mode = &fh->dev->mode[chn];
-
-	if ((new_mode->color & MASK_COLOR) != (old_mode->color & MASK_COLOR))
-		new_mode->restart = 1;
-	else if (new_mode->scale != old_mode->scale)
-		new_mode->restart = 1;
-	else if (new_mode->format != old_mode->format)
-		new_mode->restart = 1;
-
-	s2255_set_mode(dev, chn, new_mode);
-	new_mode->restart = 0;
-	*old_mode = *new_mode;
-	dev->cur_fmt[chn] = fh->fmt;
-	dev->last_frame[chn] = -1;
-	dev->bad_payload[chn] = 0;
-	dev->cur_frame[chn] = 0;
-	dev->frame_count[chn] = 0;
+	channel->last_frame = -1;
+	channel->bad_payload = 0;
+	channel->cur_frame = 0;
+	channel->frame_count = 0;
 	for (j = 0; j < SYS_FRAMES; j++) {
-		dev->buffer[chn].frame[j].ulState = S2255_READ_IDLE;
-		dev->buffer[chn].frame[j].cur_size = 0;
+		channel->buffer.frame[j].ulState = S2255_READ_IDLE;
+		channel->buffer.frame[j].cur_size = 0;
 	}
 	res = videobuf_streamon(&fh->vb_vidq);
 	if (res == 0) {
-		s2255_start_acquire(dev, chn);
-		dev->b_acquire[chn] = 1;
-	} else {
-		res_free(dev, fh);
-	}
+		s2255_start_acquire(channel);
+		channel->b_acquire = 1;
+	} else
+		res_free(fh);
+
 	return res;
 }
 
 static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
-	dprintk(4, "%s\n, channel: %d", __func__, fh->channel);
+	dprintk(4, "%s\n, channel: %d", __func__, fh->channel->idx);
 	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		printk(KERN_ERR "invalid fh type0\n");
 		return -EINVAL;
@@ -1358,16 +1353,16 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 		printk(KERN_ERR "invalid type i\n");
 		return -EINVAL;
 	}
-	s2255_stop_acquire(dev, fh->channel);
+	s2255_stop_acquire(fh->channel);
 	videobuf_streamoff(&fh->vb_vidq);
-	res_free(dev, fh);
+	res_free(fh);
 	return 0;
 }
 
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_mode *mode;
+	struct s2255_mode mode;
 	struct videobuf_queue *q = &fh->vb_vidq;
 	int ret = 0;
 	mutex_lock(&q->vb_lock);
@@ -1376,29 +1371,32 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
 		ret = -EBUSY;
 		goto out_s_std;
 	}
-	if (res_locked(fh->dev, fh)) {
+	if (res_locked(fh)) {
 		dprintk(1, "can't change standard after started\n");
 		ret = -EBUSY;
 		goto out_s_std;
 	}
-	mode = &fh->mode;
+	mode = fh->channel->mode;
 	if (*i & V4L2_STD_NTSC) {
 		dprintk(4, "%s NTSC\n", __func__);
 		/* if changing format, reset frame decimation/intervals */
-		if (mode->format != FORMAT_NTSC) {
-			mode->format = FORMAT_NTSC;
-			mode->fdec = FDEC_1;
+		if (mode.format != FORMAT_NTSC) {
+			mode.restart = 1;
+			mode.format = FORMAT_NTSC;
+			mode.fdec = FDEC_1;
 		}
 	} else if (*i & V4L2_STD_PAL) {
 		dprintk(4, "%s PAL\n", __func__);
-		mode->format = FORMAT_PAL;
-		if (mode->format != FORMAT_PAL) {
-			mode->format = FORMAT_PAL;
-			mode->fdec = FDEC_1;
+		if (mode.format != FORMAT_PAL) {
+			mode.restart = 1;
+			mode.format = FORMAT_PAL;
+			mode.fdec = FDEC_1;
 		}
 	} else {
 		ret = -EINVAL;
 	}
+	if (mode.restart)
+		s2255_set_mode(fh->channel, &mode);
 out_s_std:
 	mutex_unlock(&q->vb_lock);
 	return ret;
@@ -1416,6 +1414,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 {
 	struct s2255_fh *fh = priv;
 	struct s2255_dev *dev = fh->dev;
+	struct s2255_channel *channel = fh->channel;
 	u32 status = 0;
 	if (inp->index != 0)
 		return -EINVAL;
@@ -1424,7 +1423,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 	inp->status = 0;
 	if (dev->dsp_fw_ver >= S2255_MIN_DSP_STATUS) {
 		int rc;
-		rc = s2255_cmd_status(dev, fh->channel, &status);
+		rc = s2255_cmd_status(fh->channel, &status);
 		dprintk(4, "s2255_cmd_status rc: %d status %x\n", rc, status);
 		if (rc == 0)
 			inp->status =  (status & 0x01) ? 0
@@ -1436,7 +1435,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 		strlcpy(inp->name, "Composite", sizeof(inp->name));
 		break;
 	case 0x2257:
-		strlcpy(inp->name, (fh->channel < 2) ? "Composite" : "S-Video",
+		strlcpy(inp->name, (channel->idx < 2) ? "Composite" : "S-Video",
 			sizeof(inp->name));
 		break;
 	}
@@ -1460,6 +1459,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 			    struct v4l2_queryctrl *qc)
 {
 	struct s2255_fh *fh = priv;
+	struct s2255_channel *channel = fh->channel;
 	struct s2255_dev *dev = fh->dev;
 	switch (qc->id) {
 	case V4L2_CID_BRIGHTNESS:
@@ -1477,7 +1477,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 	case V4L2_CID_PRIVATE_COLORFILTER:
 		if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER)
 			return -EINVAL;
-		if ((dev->pid == 0x2257) && (fh->channel > 1))
+		if ((dev->pid == 0x2257) && (channel->idx > 1))
 			return -EINVAL;
 		strlcpy(qc->name, "Color Filter", sizeof(qc->name));
 		qc->type = V4L2_CTRL_TYPE_MENU;
@@ -1499,25 +1499,26 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 {
 	struct s2255_fh *fh = priv;
 	struct s2255_dev *dev = fh->dev;
+	struct s2255_channel *channel = fh->channel;
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = fh->mode.bright;
+		ctrl->value = channel->mode.bright;
 		break;
 	case V4L2_CID_CONTRAST:
-		ctrl->value = fh->mode.contrast;
+		ctrl->value = channel->mode.contrast;
 		break;
 	case V4L2_CID_SATURATION:
-		ctrl->value = fh->mode.saturation;
+		ctrl->value = channel->mode.saturation;
 		break;
 	case V4L2_CID_HUE:
-		ctrl->value = fh->mode.hue;
+		ctrl->value = channel->mode.hue;
 		break;
 	case V4L2_CID_PRIVATE_COLORFILTER:
 		if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER)
 			return -EINVAL;
-		if ((dev->pid == 0x2257) && (fh->channel > 1))
+		if ((dev->pid == 0x2257) && (channel->idx > 1))
 			return -EINVAL;
-		ctrl->value = !((fh->mode.color & MASK_INPUT_TYPE) >> 16);
+		ctrl->value = !((channel->mode.color & MASK_INPUT_TYPE) >> 16);
 		break;
 	default:
 		return -EINVAL;
@@ -1530,41 +1531,42 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 			 struct v4l2_control *ctrl)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
-	struct s2255_mode *mode;
-	mode = &fh->mode;
+	struct s2255_channel *channel = fh->channel;
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
+	struct s2255_mode mode;
+	mode = channel->mode;
 	dprintk(4, "%s\n", __func__);
 	/* update the mode to the corresponding value */
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		mode->bright = ctrl->value;
+		mode.bright = ctrl->value;
 		break;
 	case V4L2_CID_CONTRAST:
-		mode->contrast = ctrl->value;
+		mode.contrast = ctrl->value;
 		break;
 	case V4L2_CID_HUE:
-		mode->hue = ctrl->value;
+		mode.hue = ctrl->value;
 		break;
 	case V4L2_CID_SATURATION:
-		mode->saturation = ctrl->value;
+		mode.saturation = ctrl->value;
 		break;
 	case V4L2_CID_PRIVATE_COLORFILTER:
 		if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER)
 			return -EINVAL;
-		if ((dev->pid == 0x2257) && (fh->channel > 1))
+		if ((dev->pid == 0x2257) && (channel->idx > 1))
 			return -EINVAL;
-		mode->color &= ~MASK_INPUT_TYPE;
-		mode->color |= ((ctrl->value ? 0 : 1) << 16);
+		mode.color &= ~MASK_INPUT_TYPE;
+		mode.color |= ((ctrl->value ? 0 : 1) << 16);
 		break;
 	default:
 		return -EINVAL;
 	}
-	mode->restart = 0;
+	mode.restart = 0;
 	/* set mode here.  Note: stream does not need restarted.
 	   some V4L programs restart stream unnecessarily
 	   after a s_crtl.
 	*/
-	s2255_set_mode(dev, fh->channel, mode);
+	s2255_set_mode(fh->channel, &mode);
 	return 0;
 }
 
@@ -1572,8 +1574,8 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv,
 			 struct v4l2_jpegcompression *jc)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
-	*jc = dev->jc[fh->channel];
+	struct s2255_channel *channel = fh->channel;
+	*jc = channel->jc;
 	dprintk(2, "%s: quality %d\n", __func__, jc->quality);
 	return 0;
 }
@@ -1582,10 +1584,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
 			 struct v4l2_jpegcompression *jc)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
+	struct s2255_channel *channel = fh->channel;
 	if (jc->quality < 0 || jc->quality > 100)
 		return -EINVAL;
-	dev->jc[fh->channel].quality = jc->quality;
+	channel->jc.quality = jc->quality;
 	dprintk(2, "%s: quality %d\n", __func__, jc->quality);
 	return 0;
 }
@@ -1594,17 +1596,17 @@ static int vidioc_g_parm(struct file *file, void *priv,
 			 struct v4l2_streamparm *sp)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
 	__u32 def_num, def_dem;
+	struct s2255_channel *channel = fh->channel;
 	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 	memset(sp, 0, sizeof(struct v4l2_streamparm));
 	sp->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
-	sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode;
-	def_num = (fh->mode.format == FORMAT_NTSC) ? 1001 : 1000;
-	def_dem = (fh->mode.format == FORMAT_NTSC) ? 30000 : 25000;
+	sp->parm.capture.capturemode = channel->cap_parm.capturemode;
+	def_num = (channel->mode.format == FORMAT_NTSC) ? 1001 : 1000;
+	def_dem = (channel->mode.format == FORMAT_NTSC) ? 30000 : 25000;
 	sp->parm.capture.timeperframe.denominator = def_dem;
-	switch (fh->mode.fdec) {
+	switch (channel->mode.fdec) {
 	default:
 	case FDEC_1:
 		sp->parm.capture.timeperframe.numerator = def_num;
@@ -1630,17 +1632,19 @@ static int vidioc_s_parm(struct file *file, void *priv,
 			 struct v4l2_streamparm *sp)
 {
 	struct s2255_fh *fh = priv;
-	struct s2255_dev *dev = fh->dev;
+	struct s2255_channel *channel = fh->channel;
+	struct s2255_mode mode;
 	int fdec = FDEC_1;
 	__u32 def_num, def_dem;
 	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
+	mode = channel->mode;
 	/* high quality capture mode requires a stream restart */
-	if (dev->cap_parm[fh->channel].capturemode
-	    != sp->parm.capture.capturemode && res_locked(fh->dev, fh))
+	if (channel->cap_parm.capturemode
+	    != sp->parm.capture.capturemode && res_locked(fh))
 		return -EBUSY;
-	def_num = (fh->mode.format == FORMAT_NTSC) ? 1001 : 1000;
-	def_dem = (fh->mode.format == FORMAT_NTSC) ? 30000 : 25000;
+	def_num = (mode.format == FORMAT_NTSC) ? 1001 : 1000;
+	def_dem = (mode.format == FORMAT_NTSC) ? 30000 : 25000;
 	if (def_dem != sp->parm.capture.timeperframe.denominator)
 		sp->parm.capture.timeperframe.numerator = def_num;
 	else if (sp->parm.capture.timeperframe.numerator <= def_num)
@@ -1655,9 +1659,9 @@ static int vidioc_s_parm(struct file *file, void *priv,
 		sp->parm.capture.timeperframe.numerator = def_num * 5;
 		fdec = FDEC_5;
 	}
-	fh->mode.fdec = fdec;
+	mode.fdec = fdec;
 	sp->parm.capture.timeperframe.denominator = def_dem;
-	s2255_set_mode(dev, fh->channel, &fh->mode);
+	s2255_set_mode(channel, &mode);
 	dprintk(4, "%s capture mode, %d timeperframe %d/%d, fdec %d\n",
 		__func__,
 		sp->parm.capture.capturemode,
@@ -1707,24 +1711,13 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,
 static int s2255_open(struct file *file)
 {
 	struct video_device *vdev = video_devdata(file);
-	struct s2255_dev *dev = video_drvdata(file);
+	struct s2255_channel *channel = video_drvdata(file);
+	struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev);
 	struct s2255_fh *fh;
 	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	int i = 0;
-	int cur_channel = -1;
 	int state;
 	dprintk(1, "s2255: open called (dev=%s)\n",
 		video_device_node_name(vdev));
-
-	for (i = 0; i < MAX_CHANNELS; i++) {
-		if (&dev->vdev[i] == vdev) {
-			cur_channel = i;
-			break;
-		}
-	}
-	if (i == MAX_CHANNELS)
-		return -ENODEV;
-
 	/*
 	 * open lock necessary to prevent multiple instances
 	 * of v4l-conf (or other programs) from simultaneously
@@ -1806,24 +1799,20 @@ static int s2255_open(struct file *file)
 	file->private_data = fh;
 	fh->dev = dev;
 	fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	fh->mode = dev->mode[cur_channel];
-	fh->fmt = dev->cur_fmt[cur_channel];
-	/* default 4CIF NTSC */
-	fh->width = LINE_SZ_4CIFS_NTSC;
-	fh->height = NUM_LINES_4CIFS_NTSC * 2;
-	fh->channel = cur_channel;
-	/* configure channel to default state */
-	if (!dev->chn_configured[cur_channel]) {
-		s2255_set_mode(dev, cur_channel, &fh->mode);
-		dev->chn_configured[cur_channel] = 1;
+	fh->channel = channel;
+	if (!channel->configured) {
+		/* configure channel to default state */
+		channel->fmt = &formats[0];
+		s2255_set_mode(channel, &channel->mode);
+		channel->configured = 1;
 	}
 	dprintk(1, "%s: dev=%s type=%s\n", __func__,
 		video_device_node_name(vdev), v4l2_type_names[type]);
 	dprintk(2, "%s: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n", __func__,
 		(unsigned long)fh, (unsigned long)dev,
-		(unsigned long)&dev->vidq[cur_channel]);
+		(unsigned long)&channel->vidq);
 	dprintk(4, "%s: list_empty active=%d\n", __func__,
-		list_empty(&dev->vidq[cur_channel].active));
+		list_empty(&channel->vidq.active));
 	videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops,
 				    NULL, &dev->slock,
 				    fh->type,
@@ -1865,6 +1854,7 @@ static void s2255_destroy(struct s2255_dev *dev)
 	mutex_destroy(&dev->open_lock);
 	mutex_destroy(&dev->lock);
 	usb_put_dev(dev->udev);
+	v4l2_device_unregister(&dev->v4l2_dev);
 	dprintk(1, "%s", __func__);
 	kfree(dev);
 }
@@ -1874,14 +1864,15 @@ static int s2255_release(struct file *file)
 	struct s2255_fh *fh = file->private_data;
 	struct s2255_dev *dev = fh->dev;
 	struct video_device *vdev = video_devdata(file);
+	struct s2255_channel *channel = fh->channel;
 	if (!dev)
 		return -ENODEV;
 	/* turn off stream */
 	if (res_check(fh)) {
-		if (dev->b_acquire[fh->channel])
-			s2255_stop_acquire(dev, fh->channel);
+		if (channel->b_acquire)
+			s2255_stop_acquire(fh->channel);
 		videobuf_streamoff(&fh->vb_vidq);
-		res_free(dev, fh);
+		res_free(fh);
 	}
 	videobuf_mmap_free(&fh->vb_vidq);
 	dprintk(1, "%s (dev=%s)\n", __func__, video_device_node_name(vdev));
@@ -1945,9 +1936,10 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 
 static void s2255_video_device_release(struct video_device *vdev)
 {
-	struct s2255_dev *dev = video_get_drvdata(vdev);
-	dprintk(4, "%s, chnls: %d \n", __func__, atomic_read(&dev->channels));
-	if (atomic_dec_and_test(&dev->channels))
+	struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev);
+	dprintk(4, "%s, chnls: %d \n", __func__,
+		atomic_read(&dev->num_channels));
+	if (atomic_dec_and_test(&dev->num_channels))
 		s2255_destroy(dev);
 	return;
 }
@@ -1966,47 +1958,48 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 	int ret;
 	int i;
 	int cur_nr = video_nr;
+	struct s2255_channel *channel;
 	ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev);
 	if (ret)
 		return ret;
 	/* initialize all video 4 linux */
 	/* register 4 video devices */
 	for (i = 0; i < MAX_CHANNELS; i++) {
-		INIT_LIST_HEAD(&dev->vidq[i].active);
-		dev->vidq[i].dev = dev;
-		dev->vidq[i].channel = i;
+		channel = &dev->channel[i];
+		INIT_LIST_HEAD(&channel->vidq.active);
+		channel->vidq.dev = dev;
 		/* register 4 video devices */
-		memcpy(&dev->vdev[i], &template, sizeof(struct video_device));
-		dev->vdev[i].v4l2_dev = &dev->v4l2_dev;
-		video_set_drvdata(&dev->vdev[i], dev);
+		channel->vdev = template;
+		channel->vdev.v4l2_dev = &dev->v4l2_dev;
+		video_set_drvdata(&channel->vdev, channel);
 		if (video_nr == -1)
-			ret = video_register_device(&dev->vdev[i],
+			ret = video_register_device(&channel->vdev,
 						    VFL_TYPE_GRABBER,
 						    video_nr);
 		else
-			ret = video_register_device(&dev->vdev[i],
+			ret = video_register_device(&channel->vdev,
 						    VFL_TYPE_GRABBER,
 						    cur_nr + i);
+
 		if (ret) {
 			dev_err(&dev->udev->dev,
 				"failed to register video device!\n");
 			break;
 		}
-		atomic_inc(&dev->channels);
+		atomic_inc(&dev->num_channels);
 		v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
-			  video_device_node_name(&dev->vdev[i]));
+			  video_device_node_name(&channel->vdev));
 
 	}
-
 	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n",
 	       S2255_MAJOR_VERSION,
 	       S2255_MINOR_VERSION);
 	/* if no channels registered, return error and probe will fail*/
-	if (atomic_read(&dev->channels) == 0) {
+	if (atomic_read(&dev->num_channels) == 0) {
 		v4l2_device_unregister(&dev->v4l2_dev);
 		return ret;
 	}
-	if (atomic_read(&dev->channels) != MAX_CHANNELS)
+	if (atomic_read(&dev->num_channels) != MAX_CHANNELS)
 		printk(KERN_WARNING "s2255: Not all channels available.\n");
 	return 0;
 }
@@ -2033,12 +2026,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 	s32 idx = -1;
 	struct s2255_framei *frm;
 	unsigned char *pdata;
-
+	struct s2255_channel *channel;
 	dprintk(100, "buffer to user\n");
-
-	idx = dev->cur_frame[dev->cc];
-	frm = &dev->buffer[dev->cc].frame[idx];
-
+	channel = &dev->channel[dev->cc];
+	idx = channel->cur_frame;
+	frm = &channel->buffer.frame[idx];
 	if (frm->ulState == S2255_READ_IDLE) {
 		int jj;
 		unsigned int cc;
@@ -2063,16 +2055,18 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 				}
 				/* reverse it */
 				dev->cc = G_chnmap[cc];
+				channel = &dev->channel[dev->cc];
 				payload =  pdword[3];
-				if (payload > dev->req_image_size[dev->cc]) {
-					dev->bad_payload[dev->cc]++;
+				if (payload > channel->req_image_size) {
+					channel->bad_payload++;
 					/* discard the bad frame */
 					return -EINVAL;
 				}
-				dev->pkt_size[dev->cc] = payload;
-				dev->jpg_size[dev->cc] = pdword[4];
+				channel->pkt_size = payload;
+				channel->jpg_size = pdword[4];
 				break;
 			case S2255_MARKER_RESPONSE:
+
 				pdata += DEF_USB_BLOCK;
 				jj += DEF_USB_BLOCK;
 				if (pdword[1] >= MAX_CHANNELS)
@@ -2080,12 +2074,13 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 				cc = G_chnmap[pdword[1]];
 				if (cc >= MAX_CHANNELS)
 					break;
+				channel = &dev->channel[cc];
 				switch (pdword[2]) {
 				case S2255_RESPONSE_SETMODE:
 					/* check if channel valid */
 					/* set mode ready */
-					dev->setmode_ready[cc] = 1;
-					wake_up(&dev->wait_setmode[cc]);
+					channel->setmode_ready = 1;
+					wake_up(&channel->wait_setmode);
 					dprintk(5, "setmode ready %d\n", cc);
 					break;
 				case S2255_RESPONSE_FW:
@@ -2099,9 +2094,9 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 					wake_up(&dev->fw_data->wait_fw);
 					break;
 				case S2255_RESPONSE_STATUS:
-					dev->vidstatus[cc] = pdword[3];
-					dev->vidstatus_ready[cc] = 1;
-					wake_up(&dev->wait_vidstatus[cc]);
+					channel->vidstatus = pdword[3];
+					channel->vidstatus_ready = 1;
+					wake_up(&channel->wait_vidstatus);
 					dprintk(5, "got vidstatus %x chan %d\n",
 						pdword[3], cc);
 					break;
@@ -2118,13 +2113,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 		if (!bframe)
 			return -EINVAL;
 	}
-
-
-	idx = dev->cur_frame[dev->cc];
-	frm = &dev->buffer[dev->cc].frame[idx];
-
+	channel = &dev->channel[dev->cc];
+	idx = channel->cur_frame;
+	frm = &channel->buffer.frame[idx];
 	/* search done.  now find out if should be acquiring on this channel */
-	if (!dev->b_acquire[dev->cc]) {
+	if (!channel->b_acquire) {
 		/* we found a frame, but this channel is turned off */
 		frm->ulState = S2255_READ_IDLE;
 		return -EINVAL;
@@ -2149,30 +2142,28 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 
 	copy_size = (pipe_info->cur_transfer_size - offset);
 
-	size = dev->pkt_size[dev->cc] - PREFIX_SIZE;
+	size = channel->pkt_size - PREFIX_SIZE;
 
 	/* sanity check on pdest */
-	if ((copy_size + frm->cur_size) < dev->req_image_size[dev->cc])
+	if ((copy_size + frm->cur_size) < channel->req_image_size)
 		memcpy(pdest, psrc, copy_size);
 
 	frm->cur_size += copy_size;
 	dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size);
 
 	if (frm->cur_size >= size) {
-
-		u32 cc = dev->cc;
 		dprintk(2, "****************[%d]Buffer[%d]full*************\n",
-			cc, idx);
-		dev->last_frame[cc] = dev->cur_frame[cc];
-		dev->cur_frame[cc]++;
+			dev->cc, idx);
+		channel->last_frame = channel->cur_frame;
+		channel->cur_frame++;
 		/* end of system frame ring buffer, start at zero */
-		if ((dev->cur_frame[cc] == SYS_FRAMES) ||
-		    (dev->cur_frame[cc] == dev->buffer[cc].dwFrames))
-			dev->cur_frame[cc] = 0;
+		if ((channel->cur_frame == SYS_FRAMES) ||
+		    (channel->cur_frame == channel->buffer.dwFrames))
+			channel->cur_frame = 0;
 		/* frame ready */
-		if (dev->b_acquire[cc])
-			s2255_got_frame(dev, cc, dev->jpg_size[cc]);
-		dev->frame_count[cc]++;
+		if (channel->b_acquire)
+			s2255_got_frame(channel, channel->jpg_size);
+		channel->frame_count++;
 		frm->ulState = S2255_READ_IDLE;
 		frm->cur_size = 0;
 
@@ -2245,16 +2236,12 @@ static int s2255_get_fx2fw(struct s2255_dev *dev)
  * Create the system ring buffer to copy frames into from the
  * usb read pipe.
  */
-static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn)
+static int s2255_create_sys_buffers(struct s2255_channel *channel)
 {
 	unsigned long i;
 	unsigned long reqsize;
 	dprintk(1, "create sys buffers\n");
-	if (chn >= MAX_CHANNELS)
-		return -1;
-
-	dev->buffer[chn].dwFrames = SYS_FRAMES;
-
+	channel->buffer.dwFrames = SYS_FRAMES;
 	/* always allocate maximum size(PAL) for system buffers */
 	reqsize = SYS_FRAMES_MAXSIZE;
 
@@ -2263,42 +2250,40 @@ static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn)
 
 	for (i = 0; i < SYS_FRAMES; i++) {
 		/* allocate the frames */
-		dev->buffer[chn].frame[i].lpvbits = vmalloc(reqsize);
-
-		dprintk(1, "valloc %p chan %lu, idx %lu, pdata %p\n",
-			&dev->buffer[chn].frame[i], chn, i,
-			dev->buffer[chn].frame[i].lpvbits);
-		dev->buffer[chn].frame[i].size = reqsize;
-		if (dev->buffer[chn].frame[i].lpvbits == NULL) {
+		channel->buffer.frame[i].lpvbits = vmalloc(reqsize);
+		dprintk(1, "valloc %p chan %d, idx %lu, pdata %p\n",
+			&channel->buffer.frame[i], channel->idx, i,
+			channel->buffer.frame[i].lpvbits);
+		channel->buffer.frame[i].size = reqsize;
+		if (channel->buffer.frame[i].lpvbits == NULL) {
 			printk(KERN_INFO "out of memory.  using less frames\n");
-			dev->buffer[chn].dwFrames = i;
+			channel->buffer.dwFrames = i;
 			break;
 		}
 	}
 
 	/* make sure internal states are set */
 	for (i = 0; i < SYS_FRAMES; i++) {
-		dev->buffer[chn].frame[i].ulState = 0;
-		dev->buffer[chn].frame[i].cur_size = 0;
+		channel->buffer.frame[i].ulState = 0;
+		channel->buffer.frame[i].cur_size = 0;
 	}
 
-	dev->cur_frame[chn] = 0;
-	dev->last_frame[chn] = -1;
+	channel->cur_frame = 0;
+	channel->last_frame = -1;
 	return 0;
 }
 
-static int s2255_release_sys_buffers(struct s2255_dev *dev,
-				     unsigned long channel)
+static int s2255_release_sys_buffers(struct s2255_channel *channel)
 {
 	unsigned long i;
 	dprintk(1, "release sys buffers\n");
 	for (i = 0; i < SYS_FRAMES; i++) {
-		if (dev->buffer[channel].frame[i].lpvbits) {
+		if (channel->buffer.frame[i].lpvbits) {
 			dprintk(1, "vfree %p\n",
-				dev->buffer[channel].frame[i].lpvbits);
-			vfree(dev->buffer[channel].frame[i].lpvbits);
+				channel->buffer.frame[i].lpvbits);
+			vfree(channel->buffer.frame[i].lpvbits);
 		}
-		dev->buffer[channel].frame[i].lpvbits = NULL;
+		channel->buffer.frame[i].lpvbits = NULL;
 	}
 	return 0;
 }
@@ -2335,17 +2320,20 @@ static int s2255_board_init(struct s2255_dev *dev)
 			fw_ver & 0xff);
 
 	for (j = 0; j < MAX_CHANNELS; j++) {
-		dev->b_acquire[j] = 0;
-		dev->mode[j] = mode_def;
+		struct s2255_channel *channel = &dev->channel[j];
+		channel->b_acquire = 0;
+		channel->mode = mode_def;
 		if (dev->pid == 0x2257 && j > 1)
-			dev->mode[j].color |= (1 << 16);
-		dev->jc[j].quality = S2255_DEF_JPEG_QUAL;
-		dev->cur_fmt[j] = &formats[0];
-		dev->mode[j].restart = 1;
-		dev->req_image_size[j] = get_transfer_size(&mode_def);
-		dev->frame_count[j] = 0;
+			channel->mode.color |= (1 << 16);
+		channel->jc.quality = S2255_DEF_JPEG_QUAL;
+		channel->width = LINE_SZ_4CIFS_NTSC;
+		channel->height = NUM_LINES_4CIFS_NTSC * 2;
+		channel->fmt = &formats[0];
+		channel->mode.restart = 1;
+		channel->req_image_size = get_transfer_size(&mode_def);
+		channel->frame_count = 0;
 		/* create the system buffers */
-		s2255_create_sys_buffers(dev, j);
+		s2255_create_sys_buffers(channel);
 	}
 	/* start read pipe */
 	s2255_start_readpipe(dev);
@@ -2359,14 +2347,12 @@ static int s2255_board_shutdown(struct s2255_dev *dev)
 	dprintk(1, "%s: dev: %p", __func__,  dev);
 
 	for (i = 0; i < MAX_CHANNELS; i++) {
-		if (dev->b_acquire[i])
-			s2255_stop_acquire(dev, i);
+		if (dev->channel[i].b_acquire)
+			s2255_stop_acquire(&dev->channel[i]);
 	}
-
 	s2255_stop_readpipe(dev);
-
 	for (i = 0; i < MAX_CHANNELS; i++)
-		s2255_release_sys_buffers(dev, i);
+		s2255_release_sys_buffers(&dev->channel[i]);
 	/* release transfer buffer */
 	kfree(dev->pipe.transfer_buffer);
 	return 0;
@@ -2459,29 +2445,26 @@ static int s2255_start_readpipe(struct s2255_dev *dev)
 }
 
 /* starts acquisition process */
-static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn)
+static int s2255_start_acquire(struct s2255_channel *channel)
 {
 	unsigned char *buffer;
 	int res;
 	unsigned long chn_rev;
 	int j;
-	if (chn >= MAX_CHANNELS) {
-		dprintk(2, "start acquire failed, bad channel %lu\n", chn);
-		return -1;
-	}
-	chn_rev = G_chnmap[chn];
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
+	chn_rev = G_chnmap[channel->idx];
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
 		return -ENOMEM;
 	}
 
-	dev->last_frame[chn] = -1;
-	dev->bad_payload[chn] = 0;
-	dev->cur_frame[chn] = 0;
+	channel->last_frame = -1;
+	channel->bad_payload = 0;
+	channel->cur_frame = 0;
 	for (j = 0; j < SYS_FRAMES; j++) {
-		dev->buffer[chn].frame[j].ulState = 0;
-		dev->buffer[chn].frame[j].cur_size = 0;
+		channel->buffer.frame[j].ulState = 0;
+		channel->buffer.frame[j].cur_size = 0;
 	}
 
 	/* send the start command */
@@ -2492,21 +2475,18 @@ static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn)
 	if (res != 0)
 		dev_err(&dev->udev->dev, "CMD_START error\n");
 
-	dprintk(2, "start acquire exit[%lu] %d \n", chn, res);
+	dprintk(2, "start acquire exit[%d] %d \n", channel->idx, res);
 	kfree(buffer);
 	return 0;
 }
 
-static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn)
+static int s2255_stop_acquire(struct s2255_channel *channel)
 {
 	unsigned char *buffer;
 	int res;
 	unsigned long chn_rev;
-	if (chn >= MAX_CHANNELS) {
-		dprintk(2, "stop acquire failed, bad channel %lu\n", chn);
-		return -1;
-	}
-	chn_rev = G_chnmap[chn];
+	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
+	chn_rev = G_chnmap[channel->idx];
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
@@ -2520,8 +2500,8 @@ static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn)
 	if (res != 0)
 		dev_err(&dev->udev->dev, "CMD_STOP error\n");
 	kfree(buffer);
-	dev->b_acquire[chn] = 0;
-	dprintk(4, "%s: chn %lu, res %d\n", __func__, chn, res);
+	channel->b_acquire = 0;
+	dprintk(4, "%s: chn %d, res %d\n", __func__, channel->idx, res);
 	return res;
 }
 
@@ -2575,7 +2555,7 @@ static int s2255_probe(struct usb_interface *interface,
 		s2255_dev_err(&interface->dev, "out of memory\n");
 		return -ENOMEM;
 	}
-	atomic_set(&dev->channels, 0);
+	atomic_set(&dev->num_channels, 0);
 	dev->pid = id->idProduct;
 	dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL);
 	if (!dev->fw_data)
@@ -2612,8 +2592,10 @@ static int s2255_probe(struct usb_interface *interface,
 	dev->timer.data = (unsigned long)dev->fw_data;
 	init_waitqueue_head(&dev->fw_data->wait_fw);
 	for (i = 0; i < MAX_CHANNELS; i++) {
-		init_waitqueue_head(&dev->wait_setmode[i]);
-		init_waitqueue_head(&dev->wait_vidstatus[i]);
+		struct s2255_channel *channel = &dev->channel[i];
+		dev->channel[i].idx = i;
+		init_waitqueue_head(&channel->wait_setmode);
+		init_waitqueue_head(&channel->wait_vidstatus);
 	}
 
 	dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -2651,7 +2633,7 @@ static int s2255_probe(struct usb_interface *interface,
 			printk(KERN_INFO "s2255: f2255usb.bin out of date.\n");
 		if (dev->pid == 0x2257 && *pRel < S2255_MIN_DSP_COLORFILTER)
 			printk(KERN_WARNING "s2255: 2257 requires firmware %d"
-			       "or above.\n", S2255_MIN_DSP_COLORFILTER);
+			       " or above.\n", S2255_MIN_DSP_COLORFILTER);
 	}
 	usb_reset_device(dev->udev);
 	/* load 2255 board specific */
@@ -2693,25 +2675,23 @@ static void s2255_disconnect(struct usb_interface *interface)
 {
 	struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface));
 	int i;
-	int channels = atomic_read(&dev->channels);
-	v4l2_device_unregister(&dev->v4l2_dev);
+	int channels = atomic_read(&dev->num_channels);
+	v4l2_device_disconnect(&dev->v4l2_dev);
 	/*see comments in the uvc_driver.c usb disconnect function */
-	atomic_inc(&dev->channels);
+	atomic_inc(&dev->num_channels);
 	/* unregister each video device. */
-	for (i = 0; i < channels; i++) {
-		if (video_is_registered(&dev->vdev[i]))
-			video_unregister_device(&dev->vdev[i]);
-	}
+	for (i = 0; i < channels; i++)
+		video_unregister_device(&dev->channel[i].vdev);
 	/* wake up any of our timers */
 	atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
 	wake_up(&dev->fw_data->wait_fw);
 	for (i = 0; i < MAX_CHANNELS; i++) {
-		dev->setmode_ready[i] = 1;
-		wake_up(&dev->wait_setmode[i]);
-		dev->vidstatus_ready[i] = 1;
-		wake_up(&dev->wait_vidstatus[i]);
+		dev->channel[i].setmode_ready = 1;
+		wake_up(&dev->channel[i].wait_setmode);
+		dev->channel[i].vidstatus_ready = 1;
+		wake_up(&dev->channel[i].wait_vidstatus);
 	}
-	if (atomic_dec_and_test(&dev->channels))
+	if (atomic_dec_and_test(&dev->num_channels))
 		s2255_destroy(dev);
 	dev_info(&interface->dev, "%s\n", __func__);
 }
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 53b6fcde380..76da7436868 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1117,13 +1117,6 @@ static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f
 	return 0;
 }
 
-static int saa711x_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return saa711x_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
 {
 	saa711x_set_lcr(sd, NULL);
@@ -1136,12 +1129,13 @@ static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f
 	return 0;
 }
 
-static int saa711x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
 		return -EINVAL;
-
-	return saa711x_set_size(sd, fmt->fmt.pix.width, fmt->fmt.pix.height);
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	return saa711x_set_size(sd, fmt->width, fmt->height);
 }
 
 /* Decode the sliced VBI data stream as created by the saa7115.
@@ -1556,8 +1550,7 @@ static const struct v4l2_subdev_audio_ops saa711x_audio_ops = {
 static const struct v4l2_subdev_video_ops saa711x_video_ops = {
 	.s_routing = saa711x_s_routing,
 	.s_crystal_freq = saa711x_s_crystal_freq,
-	.g_fmt = saa711x_g_fmt,
-	.s_fmt = saa711x_s_fmt,
+	.s_mbus_fmt = saa711x_s_mbus_fmt,
 	.s_stream = saa711x_s_stream,
 	.querystd = saa711x_querystd,
 	.g_input_status = saa711x_g_input_status,
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 87986ad62f8..79fffcf39ba 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -645,13 +645,6 @@ static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f
 	return 0;
 }
 
-static int saa7127_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return saa7127_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
 {
 	switch (data->id) {
@@ -731,7 +724,6 @@ static const struct v4l2_subdev_core_ops saa7127_core_ops = {
 };
 
 static const struct v4l2_subdev_video_ops saa7127_video_ops = {
-	.g_fmt = saa7127_g_fmt,
 	.s_std_output = saa7127_s_std_output,
 	.s_routing = saa7127_s_routing,
 	.s_stream = saa7127_s_stream,
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index 1eabff6b245..40fd31ca771 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -846,24 +846,28 @@ static int saa6752hs_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_control
 	return 0;
 }
 
-static int saa6752hs_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
 {
 	struct saa6752hs_state *h = to_state(sd);
 
 	if (h->video_format == SAA6752HS_VF_UNKNOWN)
 		h->video_format = SAA6752HS_VF_D1;
-	f->fmt.pix.width =
-		v4l2_format_table[h->video_format].fmt.pix.width;
-	f->fmt.pix.height =
-		v4l2_format_table[h->video_format].fmt.pix.height;
+	f->width = v4l2_format_table[h->video_format].fmt.pix.width;
+	f->height = v4l2_format_table[h->video_format].fmt.pix.height;
+	f->code = V4L2_MBUS_FMT_FIXED;
+	f->field = V4L2_FIELD_INTERLACED;
+	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	return 0;
 }
 
-static int saa6752hs_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
 {
 	struct saa6752hs_state *h = to_state(sd);
 	int dist_352, dist_480, dist_720;
 
+	if (f->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
+
 	/*
 	  FIXME: translate and round width/height into EMPRESS
 	  subsample type:
@@ -876,28 +880,30 @@ static int saa6752hs_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	  D1     | 720x576 | 720x480
 	*/
 
-	dist_352 = abs(f->fmt.pix.width - 352);
-	dist_480 = abs(f->fmt.pix.width - 480);
-	dist_720 = abs(f->fmt.pix.width - 720);
+	dist_352 = abs(f->width - 352);
+	dist_480 = abs(f->width - 480);
+	dist_720 = abs(f->width - 720);
 	if (dist_720 < dist_480) {
-		f->fmt.pix.width = 720;
-		f->fmt.pix.height = 576;
+		f->width = 720;
+		f->height = 576;
 		h->video_format = SAA6752HS_VF_D1;
 	} else if (dist_480 < dist_352) {
-		f->fmt.pix.width = 480;
-		f->fmt.pix.height = 576;
+		f->width = 480;
+		f->height = 576;
 		h->video_format = SAA6752HS_VF_2_3_D1;
 	} else {
-		f->fmt.pix.width = 352;
-		if (abs(f->fmt.pix.height - 576) <
-		    abs(f->fmt.pix.height - 288)) {
-			f->fmt.pix.height = 576;
+		f->width = 352;
+		if (abs(f->height - 576) <
+		    abs(f->height - 288)) {
+			f->height = 576;
 			h->video_format = SAA6752HS_VF_1_2_D1;
 		} else {
-			f->fmt.pix.height = 288;
+			f->height = 288;
 			h->video_format = SAA6752HS_VF_SIF;
 		}
 	}
+	f->field = V4L2_FIELD_INTERLACED;
+	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	return 0;
 }
 
@@ -932,8 +938,8 @@ static const struct v4l2_subdev_core_ops saa6752hs_core_ops = {
 };
 
 static const struct v4l2_subdev_video_ops saa6752hs_video_ops = {
-	.s_fmt = saa6752hs_s_fmt,
-	.g_fmt = saa6752hs_g_fmt,
+	.s_mbus_fmt = saa6752hs_s_mbus_fmt,
+	.g_mbus_fmt = saa6752hs_g_mbus_fmt,
 };
 
 static const struct v4l2_subdev_ops saa6752hs_ops = {
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index d3bd82ad010..10460fd3ce3 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -630,7 +630,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 	/* release the old buffer */
 	if (substream->runtime->dma_area) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
+		videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		substream->runtime->dma_area = NULL;
 	}
@@ -646,12 +646,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 		return err;
 	}
 
-	if (0 != (err = videobuf_sg_dma_map(&dev->pci->dev, &dev->dmasound.dma))) {
+	if (0 != (err = videobuf_dma_map(&dev->pci->dev, &dev->dmasound.dma))) {
 		dsp_buffer_free(dev);
 		return err;
 	}
 	if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) {
-		videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
+		videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		return err;
 	}
@@ -660,7 +660,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 						dev->dmasound.dma.sglen,
 						0))) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
+		videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		return err;
 	}
@@ -669,7 +669,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 	   byte, but it doesn't work. So I allocate the DMA using the
 	   V4L functions, and force ALSA to use that as the DMA area */
 
-	substream->runtime->dma_area = dev->dmasound.dma.vmalloc;
+	substream->runtime->dma_area = dev->dmasound.dma.vaddr;
 	substream->runtime->dma_bytes = dev->dmasound.bufsize;
 	substream->runtime->dma_addr = 0;
 
@@ -696,7 +696,7 @@ static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream)
 
 	if (substream->runtime->dma_area) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
+		videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		substream->runtime->dma_area = NULL;
 	}
@@ -1080,7 +1080,7 @@ static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum)
 	/* Card "creation" */
 
 	card->private_free = snd_saa7134_free;
-	chip = (snd_card_saa7134_t *) card->private_data;
+	chip = card->private_data;
 
 	spin_lock_init(&chip->lock);
 	spin_lock_init(&chip->mixer_lock);
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 72700d4e394..ec697fcd406 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3897,6 +3897,40 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x01,
 		},
 	},
+	[SAA7134_BOARD_AVERMEDIA_M733A] = {
+		.name		= "Avermedia PCI M733A",
+		.audio_clock	= 0x00187de7,
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tuner_config	= 0,
+		.gpiomask	= 0x020200000,
+		.inputs		= {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = TV,
+			.gpio = 0x00200000,
+		},
+		.mute = {
+			.name = name_mute,
+			.amux = TV,
+			.gpio = 0x01,
+		},
+	},
 	[SAA7134_BOARD_BEHOLD_401] = {
 		/*       Beholder Intl. Ltd. 2008      */
 		/*Dmitry Belimov <d.belimov@gmail.com> */
@@ -5428,6 +5462,30 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = TV,
 		},
 	},
+	[SAA7134_BOARD_TECHNOTREND_BUDGET_T3000] = {
+		.name           = "TechoTrend TT-budget T-3000",
+		.tuner_type     = TUNER_PHILIPS_TD1316,
+		.audio_clock    = 0x00187de7,
+		.radio_type     = UNSET,
+		.tuner_addr     = 0x63,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.inputs = {{
+			.name   = name_tv,
+			.vmux   = 3,
+			.amux   = TV,
+			.tv     = 1,
+		}, {
+			.name   = name_comp1,
+			.vmux   = 0,
+			.amux   = LINE2,
+		}, {
+			.name   = name_svideo,
+			.vmux   = 8,
+			.amux   = LINE2,
+		} },
+	},
 
 };
 
@@ -5822,6 +5880,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_M135A,
 	}, {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0x4155,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_M733A,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0x4255,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_M733A,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = PCI_VENDOR_ID_PHILIPS,
 		.subdevice    = 0x2004,
@@ -6585,6 +6655,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0x6655,
 		.driver_data  = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S,
 	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x13c2,
+		.subdevice    = 0x2804,
+		.driver_data  = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000,
+	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -6786,6 +6862,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	switch (dev->board) {
 	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+	case SAA7134_BOARD_AVERMEDIA_M733A:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -7087,6 +7164,14 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x0000C000, 0x0000C000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000C000, 0x0000C000);
 		break;
+	case SAA7134_BOARD_AVERMEDIA_M733A:
+		saa7134_set_gpio(dev, 1, 1);
+		msleep(10);
+		saa7134_set_gpio(dev, 1, 0);
+		msleep(10);
+		saa7134_set_gpio(dev, 1, 1);
+		dev->has_remote = SAA7134_REMOTE_GPIO;
+		break;
 	}
 	return 0;
 }
@@ -7265,6 +7350,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 	case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
 	case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
+	case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
 	{
 
 		/* The Philips EUROPA based hybrid boards have the tuner
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 90f23188129..40bc635e8a3 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -256,7 +256,7 @@ void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
 	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
 }
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 31e82be1b7e..f26fe7661a1 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -481,6 +481,17 @@ static struct tda1004x_config medion_cardbus = {
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
+static struct tda1004x_config technotrend_budget_t3000_config = {
+	.demod_address = 0x8,
+	.invert        = 1,
+	.invert_oclk   = 0,
+	.xtal_freq     = TDA10046_XTAL_4M,
+	.agc_config    = TDA10046_AGC_DEFAULT,
+	.if_freq       = TDA10046_FREQ_3617,
+	.tuner_address = 0x63,
+	.request_firmware = philips_tda1004x_request_firmware
+};
+
 /* ------------------------------------------------------------------
  * tda 1004x based cards with philips silicon tuner
  */
@@ -1168,6 +1179,18 @@ static int dvb_init(struct saa7134_dev *dev)
 			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
 		}
 		break;
+	case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
+		fe0->dvb.frontend = dvb_attach(tda10046_attach,
+					       &technotrend_budget_t3000_config,
+					       &dev->i2c_adap);
+		if (fe0->dvb.frontend) {
+			dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+			fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+			fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
+			fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
+			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+		}
+		break;
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 		fe0->dvb.frontend = dvb_attach(tda10046_attach,
 					       &philips_tu1216_61_config,
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index ea877a50f52..e763f9fd013 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -223,9 +223,11 @@ static int empress_g_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
 	struct saa7134_dev *dev = file->private_data;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
-	saa_call_all(dev, video, g_fmt, f);
+	saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt);
 
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
 
@@ -236,8 +238,11 @@ static int empress_s_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
 	struct saa7134_dev *dev = file->private_data;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
-	saa_call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 
 	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e5565e2fd42..0b336ca6d55 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -141,8 +141,8 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 
 	if (dev == NULL) {
-		dprintk("get_key_flydvb_trio: "
-			 "gir->c->adapter->algo_data is NULL!\n");
+		i2cdprintk("get_key_flydvb_trio: "
+			   "ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -195,8 +195,8 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
-		dprintk("get_key_msi_tvanywhere_plus: "
-			"gir->c->adapter->algo_data is NULL!\n");
+		i2cdprintk("get_key_msi_tvanywhere_plus: "
+			   "ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -657,12 +657,19 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
 		break;
 	case SAA7134_BOARD_AVERMEDIA_M135A:
-		ir_codes     = RC_MAP_AVERMEDIA_M135A_RM_JX;
+		ir_codes     = RC_MAP_AVERMEDIA_M135A;
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
 		raw_decode   = 1;
 		break;
+	case SAA7134_BOARD_AVERMEDIA_M733A:
+		ir_codes     = RC_MAP_AVERMEDIA_M733A_RM_K6;
+		mask_keydown = 0x0040000;
+		mask_keyup   = 0x0040000;
+		mask_keycode = 0xffff;
+		raw_decode   = 1;
+		break;
 	case SAA7134_BOARD_AVERMEDIA_777:
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
 		ir_codes     = RC_MAP_AVERMEDIA;
@@ -815,7 +822,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keyup   = 0x020000;
 		polling      = 50; /* ms */
 		break;
-	break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 3962534267b..c040a180854 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -303,6 +303,8 @@ struct saa7134_format {
 #define SAA7134_BOARD_HAWELL_HW_404M7		177
 #define SAA7134_BOARD_BEHOLD_H7             178
 #define SAA7134_BOARD_BEHOLD_A7             179
+#define SAA7134_BOARD_AVERMEDIA_M733A       180
+#define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index d521c648e15..78d69950c00 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -1199,28 +1199,32 @@ static int saa717x_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *
 }
 #endif
 
-static int saa717x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix;
 	int prescale, h_scale, v_scale;
 
-	pix = &fmt->fmt.pix;
 	v4l2_dbg(1, debug, sd, "decoder set size\n");
 
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
+
 	/* FIXME need better bounds checking here */
-	if (pix->width < 1 || pix->width > 1440)
+	if (fmt->width < 1 || fmt->width > 1440)
 		return -EINVAL;
-	if (pix->height < 1 || pix->height > 960)
+	if (fmt->height < 1 || fmt->height > 960)
 		return -EINVAL;
 
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
 	/* scaling setting */
 	/* NTSC and interlace only */
-	prescale = SAA717X_NTSC_WIDTH / pix->width;
+	prescale = SAA717X_NTSC_WIDTH / fmt->width;
 	if (prescale == 0)
 		prescale = 1;
-	h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / pix->width;
+	h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width;
 	/* interlace */
-	v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / pix->height;
+	v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height;
 
 	/* Horizontal prescaling etc */
 	set_h_prescale(sd, 0, prescale);
@@ -1241,19 +1245,19 @@ static int saa717x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
 	/* set video output size */
 	/* video number of pixels at output */
 	/* TASK A */
-	saa717x_write(sd, 0x5C, (u8)(pix->width & 0xFF));
-	saa717x_write(sd, 0x5D, (u8)((pix->width >> 8) & 0xFF));
+	saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF));
+	saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF));
 	/* TASK B */
-	saa717x_write(sd, 0x9C, (u8)(pix->width & 0xFF));
-	saa717x_write(sd, 0x9D, (u8)((pix->width >> 8) & 0xFF));
+	saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF));
+	saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF));
 
 	/* video number of lines at output */
 	/* TASK A */
-	saa717x_write(sd, 0x5E, (u8)(pix->height & 0xFF));
-	saa717x_write(sd, 0x5F, (u8)((pix->height >> 8) & 0xFF));
+	saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF));
+	saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF));
 	/* TASK B */
-	saa717x_write(sd, 0x9E, (u8)(pix->height & 0xFF));
-	saa717x_write(sd, 0x9F, (u8)((pix->height >> 8) & 0xFF));
+	saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF));
+	saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF));
 	return 0;
 }
 
@@ -1403,7 +1407,7 @@ static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = {
 
 static const struct v4l2_subdev_video_ops saa717x_video_ops = {
 	.s_routing = saa717x_s_video_routing,
-	.s_fmt = saa717x_s_fmt,
+	.s_mbus_fmt = saa717x_s_mbus_fmt,
 	.s_stream = saa717x_s_stream,
 };
 
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 4ac3b482fbb..2b24bd0de3a 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -633,6 +633,12 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 		cdwdr_width *= 2;
 	}
 
+	/* CSI2 special configuration */
+	if (pcdev->pdata->csi2_dev) {
+		in_width = ((in_width - 2) * 2);
+		left_offset *= 2;
+	}
+
 	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
 	camor = left_offset | (top_offset << 16);
 
@@ -743,16 +749,16 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
 		switch (cam->code) {
-		case V4L2_MBUS_FMT_YUYV8_2X8_BE:
+		case V4L2_MBUS_FMT_UYVY8_2X8:
 			value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */
 			break;
-		case V4L2_MBUS_FMT_YVYU8_2X8_BE:
+		case V4L2_MBUS_FMT_VYUY8_2X8:
 			value = 0x00000100; /* Cr0, Y0, Cb0, Y1 */
 			break;
-		case V4L2_MBUS_FMT_YUYV8_2X8_LE:
+		case V4L2_MBUS_FMT_YUYV8_2X8:
 			value = 0x00000200; /* Y0, Cb0, Y1, Cr0 */
 			break;
-		case V4L2_MBUS_FMT_YVYU8_2X8_LE:
+		case V4L2_MBUS_FMT_YVYU8_2X8:
 			value = 0x00000300; /* Y0, Cr0, Y1, Cb0 */
 			break;
 		default:
@@ -767,6 +773,11 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
 	value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
 	value |= pcdev->is_16bit ? 1 << 12 : 0;
+
+	/* CSI2 mode */
+	if (pcdev->pdata->csi2_dev)
+		value |= 3 << 12;
+
 	ceu_write(pcdev, CAMCR, value);
 
 	ceu_write(pcdev, CAPCR, 0x00300000);
@@ -878,11 +889,13 @@ static bool sh_mobile_ceu_packing_supported(const struct soc_mbus_pixelfmt *fmt)
 
 static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
 
-static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
+static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				     struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct device *dev = icd->dev.parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int ret, k, n;
 	int formats = 0;
 	struct sh_mobile_ceu_cam *cam;
@@ -896,19 +909,19 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
-		dev_err(icd->dev.parent,
-			"Invalid format code #%d: %d\n", idx, code);
+		dev_err(dev, "Invalid format code #%u: %d\n", idx, code);
 		return -EINVAL;
 	}
 
-	ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
-	if (ret < 0)
-		return 0;
+	if (!pcdev->pdata->csi2_dev) {
+		ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
+		if (ret < 0)
+			return 0;
+	}
 
 	if (!icd->host_priv) {
 		struct v4l2_mbus_framefmt mf;
 		struct v4l2_rect rect;
-		struct device *dev = icd->dev.parent;
 		int shift = 0;
 
 		/* FIXME: subwindow is lost between close / open */
@@ -927,7 +940,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			/* Try 2560x1920, 1280x960, 640x480, 320x240 */
 			mf.width	= 2560 >> shift;
 			mf.height	= 1920 >> shift;
-			ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+			ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+							 s_mbus_fmt, &mf);
 			if (ret < 0)
 				return ret;
 			shift++;
@@ -965,10 +979,10 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 		cam->extra_fmt = NULL;
 
 	switch (code) {
-	case V4L2_MBUS_FMT_YUYV8_2X8_BE:
-	case V4L2_MBUS_FMT_YVYU8_2X8_BE:
-	case V4L2_MBUS_FMT_YUYV8_2X8_LE:
-	case V4L2_MBUS_FMT_YVYU8_2X8_LE:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
 		if (cam->extra_fmt)
 			break;
 
@@ -1005,7 +1019,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 		xlate->code	= code;
 		xlate++;
 		dev_dbg(dev, "Providing format %s in pass-through mode\n",
-			xlate->host_fmt->name);
+			fmt->name);
 	}
 
 	return formats;
@@ -1228,7 +1242,8 @@ static int client_s_fmt(struct soc_camera_device *icd,
 	struct v4l2_cropcap cap;
 	int ret;
 
-	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf);
+	ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+					 s_mbus_fmt, mf);
 	if (ret < 0)
 		return ret;
 
@@ -1257,7 +1272,8 @@ static int client_s_fmt(struct soc_camera_device *icd,
 		tmp_h = min(2 * tmp_h, max_height);
 		mf->width = tmp_w;
 		mf->height = tmp_h;
-		ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf);
+		ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+						 s_mbus_fmt, mf);
 		dev_geo(dev, "Camera scaled to %ux%u\n",
 			mf->width, mf->height);
 		if (ret < 0) {
@@ -1514,7 +1530,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	struct device *dev = icd->dev.parent;
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
-	unsigned int ceu_sub_width, ceu_sub_height;
+	/* Keep Compiler Happy */
+	unsigned int ceu_sub_width = 0, ceu_sub_height = 0;
 	u16 scale_v, scale_h;
 	int ret;
 	bool image_mode;
@@ -1569,8 +1586,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 
 	/* Done with the camera. Now see if we can improve the result */
 
-	dev_geo(dev, "Camera %d fmt %ux%u, requested %ux%u\n",
-		ret, mf.width, mf.height, pix->width, pix->height);
+	dev_geo(dev, "fmt %ux%u, requested %ux%u\n",
+		mf.width, mf.height, pix->width, pix->height);
 	if (ret < 0)
 		return ret;
 
@@ -1634,6 +1651,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	int width, height;
 	int ret;
 
+	dev_geo(icd->dev.parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
+		 pixfmt, pix->width, pix->height);
+
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
 		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
@@ -1660,7 +1680,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	mf.code		= xlate->code;
 	mf.colorspace	= pix->colorspace;
 
-	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+	ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, try_mbus_fmt, &mf);
 	if (ret < 0)
 		return ret;
 
@@ -1684,7 +1704,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			 */
 			mf.width = 2560;
 			mf.height = 1920;
-			ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+			ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+							 try_mbus_fmt, &mf);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
 				dev_err(icd->dev.parent,
@@ -1699,6 +1720,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			pix->height = height;
 	}
 
+	dev_geo(icd->dev.parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
+		__func__, ret, pix->pixelformat, pix->width, pix->height);
+
 	return ret;
 }
 
@@ -1853,6 +1877,30 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.num_controls	= ARRAY_SIZE(sh_mobile_ceu_controls),
 };
 
+struct bus_wait {
+	struct notifier_block	notifier;
+	struct completion	completion;
+	struct device		*dev;
+};
+
+static int bus_notify(struct notifier_block *nb,
+		      unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct bus_wait *wait = container_of(nb, struct bus_wait, notifier);
+
+	if (wait->dev != dev)
+		return NOTIFY_DONE;
+
+	switch (action) {
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		/* Protect from module unloading */
+		wait_for_completion(&wait->completion);
+		return NOTIFY_OK;
+	}
+	return NOTIFY_DONE;
+}
+
 static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 {
 	struct sh_mobile_ceu_dev *pcdev;
@@ -1860,6 +1908,11 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 	void __iomem *base;
 	unsigned int irq;
 	int err = 0;
+	struct bus_wait wait = {
+		.completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion),
+		.notifier.notifier_call = bus_notify,
+	};
+	struct device *csi2;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -1931,12 +1984,54 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 	pcdev->ici.drv_name = dev_name(&pdev->dev);
 	pcdev->ici.ops = &sh_mobile_ceu_host_ops;
 
+	/* CSI2 interfacing */
+	csi2 = pcdev->pdata->csi2_dev;
+	if (csi2) {
+		wait.dev = csi2;
+
+		err = bus_register_notifier(&platform_bus_type, &wait.notifier);
+		if (err < 0)
+			goto exit_free_clk;
+
+		/*
+		 * From this point the driver module will not unload, until
+		 * we complete the completion.
+		 */
+
+		if (!csi2->driver || !csi2->driver->owner) {
+			complete(&wait.completion);
+			/* Either too late, or probing failed */
+			bus_unregister_notifier(&platform_bus_type, &wait.notifier);
+			err = -ENXIO;
+			goto exit_free_clk;
+		}
+
+		/*
+		 * The module is still loaded, in the worst case it is hanging
+		 * in device release on our completion. So, _now_ dereferencing
+		 * the "owner" is safe!
+		 */
+
+		err = try_module_get(csi2->driver->owner);
+
+		/* Let notifier complete, if it has been locked */
+		complete(&wait.completion);
+		bus_unregister_notifier(&platform_bus_type, &wait.notifier);
+		if (!err) {
+			err = -ENODEV;
+			goto exit_free_clk;
+		}
+	}
+
 	err = soc_camera_host_register(&pcdev->ici);
 	if (err)
-		goto exit_free_clk;
+		goto exit_module_put;
 
 	return 0;
 
+exit_module_put:
+	if (csi2 && csi2->driver)
+		module_put(csi2->driver->owner);
 exit_free_clk:
 	pm_runtime_disable(&pdev->dev);
 	free_irq(pcdev->irq, pcdev);
@@ -1956,6 +2051,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 	struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
 					struct sh_mobile_ceu_dev, ici);
+	struct device *csi2 = pcdev->pdata->csi2_dev;
 
 	soc_camera_host_unregister(soc_host);
 	pm_runtime_disable(&pdev->dev);
@@ -1963,7 +2059,10 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
 		dma_release_declared_memory(&pdev->dev);
 	iounmap(pcdev->base);
+	if (csi2 && csi2->driver)
+		module_put(csi2->driver->owner);
 	kfree(pcdev);
+
 	return 0;
 }
 
@@ -1995,6 +2094,8 @@ static struct platform_driver sh_mobile_ceu_driver = {
 
 static int __init sh_mobile_ceu_init(void)
 {
+	/* Whatever return code */
+	request_module("sh_mobile_csi2");
 	return platform_driver_register(&sh_mobile_ceu_driver);
 }
 
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
new file mode 100644
index 00000000000..84a64681931
--- /dev/null
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -0,0 +1,354 @@
+/*
+ * Driver for the SH-Mobile MIPI CSI-2 unit
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/sh_mobile_csi2.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mediabus.h>
+#include <media/v4l2-subdev.h>
+
+#define SH_CSI2_TREF	0x00
+#define SH_CSI2_SRST	0x04
+#define SH_CSI2_PHYCNT	0x08
+#define SH_CSI2_CHKSUM	0x0C
+#define SH_CSI2_VCDT	0x10
+
+struct sh_csi2 {
+	struct v4l2_subdev		subdev;
+	struct list_head		list;
+	struct notifier_block		notifier;
+	unsigned int			irq;
+	void __iomem			*base;
+	struct platform_device		*pdev;
+	struct sh_csi2_client_config	*client;
+};
+
+static int sh_csi2_try_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_mbus_framefmt *mf)
+{
+	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
+
+	if (mf->width > 8188)
+		mf->width = 8188;
+	else if (mf->width & 1)
+		mf->width &= ~1;
+
+	switch (pdata->type) {
+	case SH_CSI2C:
+		switch (mf->code) {
+		case V4L2_MBUS_FMT_UYVY8_2X8:		/* YUV422 */
+		case V4L2_MBUS_FMT_YUYV8_1_5X8:		/* YUV420 */
+		case V4L2_MBUS_FMT_GREY8_1X8:		/* RAW8 */
+		case V4L2_MBUS_FMT_SBGGR8_1X8:
+		case V4L2_MBUS_FMT_SGRBG8_1X8:
+			break;
+		default:
+			/* All MIPI CSI-2 devices must support one of primary formats */
+			mf->code = V4L2_MBUS_FMT_YUYV8_2X8;
+		}
+		break;
+	case SH_CSI2I:
+		switch (mf->code) {
+		case V4L2_MBUS_FMT_GREY8_1X8:		/* RAW8 */
+		case V4L2_MBUS_FMT_SBGGR8_1X8:
+		case V4L2_MBUS_FMT_SGRBG8_1X8:
+		case V4L2_MBUS_FMT_SBGGR10_1X10:	/* RAW10 */
+		case V4L2_MBUS_FMT_SBGGR12_1X12:	/* RAW12 */
+			break;
+		default:
+			/* All MIPI CSI-2 devices must support one of primary formats */
+			mf->code = V4L2_MBUS_FMT_SBGGR8_1X8;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * We have done our best in try_fmt to try and tell the sensor, which formats
+ * we support. If now the configuration is unsuitable for us we can only
+ * error out.
+ */
+static int sh_csi2_s_fmt(struct v4l2_subdev *sd,
+			 struct v4l2_mbus_framefmt *mf)
+{
+	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+	u32 tmp = (priv->client->channel & 3) << 8;
+
+	dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
+	if (mf->width > 8188 || mf->width & 1)
+		return -EINVAL;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		tmp |= 0x1e;	/* YUV422 8 bit */
+		break;
+	case V4L2_MBUS_FMT_YUYV8_1_5X8:
+		tmp |= 0x18;	/* YUV420 8 bit */
+		break;
+	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
+		tmp |= 0x21;	/* RGB555 */
+		break;
+	case V4L2_MBUS_FMT_RGB565_2X8_BE:
+		tmp |= 0x22;	/* RGB565 */
+		break;
+	case V4L2_MBUS_FMT_GREY8_1X8:
+	case V4L2_MBUS_FMT_SBGGR8_1X8:
+	case V4L2_MBUS_FMT_SGRBG8_1X8:
+		tmp |= 0x2a;	/* RAW8 */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	iowrite32(tmp, priv->base + SH_CSI2_VCDT);
+
+	return 0;
+}
+
+static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
+	.s_mbus_fmt	= sh_csi2_s_fmt,
+	.try_mbus_fmt	= sh_csi2_try_fmt,
+};
+
+static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops;
+
+static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
+	.core	= &sh_csi2_subdev_core_ops,
+	.video	= &sh_csi2_subdev_video_ops,
+};
+
+static void sh_csi2_hwinit(struct sh_csi2 *priv)
+{
+	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
+	__u32 tmp = 0x10; /* Enable MIPI CSI clock lane */
+
+	/* Reflect registers immediately */
+	iowrite32(0x00000001, priv->base + SH_CSI2_TREF);
+	/* reset CSI2 harware */
+	iowrite32(0x00000001, priv->base + SH_CSI2_SRST);
+	udelay(5);
+	iowrite32(0x00000000, priv->base + SH_CSI2_SRST);
+
+	if (priv->client->lanes & 3)
+		tmp |= priv->client->lanes & 3;
+	else
+		/* Default - both lanes */
+		tmp |= 3;
+
+	if (priv->client->phy == SH_CSI2_PHY_MAIN)
+		tmp |= 0x8000;
+
+	iowrite32(tmp, priv->base + SH_CSI2_PHYCNT);
+
+	tmp = 0;
+	if (pdata->flags & SH_CSI2_ECC)
+		tmp |= 2;
+	if (pdata->flags & SH_CSI2_CRC)
+		tmp |= 1;
+	iowrite32(tmp, priv->base + SH_CSI2_CHKSUM);
+}
+
+static int sh_csi2_set_bus_param(struct soc_camera_device *icd,
+				 unsigned long flags)
+{
+	return 0;
+}
+
+static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd)
+{
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	const unsigned long flags = SOCAM_PCLK_SAMPLE_RISING |
+		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
+		SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_DATA_ACTIVE_HIGH;
+
+	return soc_camera_apply_sensor_flags(icl, flags);
+}
+
+static int sh_csi2_notify(struct notifier_block *nb,
+			  unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent);
+	struct sh_csi2 *priv =
+		container_of(nb, struct sh_csi2, notifier);
+	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
+	int ret, i;
+
+	for (i = 0; i < pdata->num_clients; i++)
+		if (&pdata->clients[i].pdev->dev == icd->pdev)
+			break;
+
+	dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i);
+
+	if (i == pdata->num_clients)
+		return NOTIFY_DONE;
+
+	switch (action) {
+	case BUS_NOTIFY_BOUND_DRIVER:
+		snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s",
+			 dev_name(v4l2_dev->dev), ".mipi-csi");
+		ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev);
+		dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
+		if (ret < 0)
+			return NOTIFY_DONE;
+
+		priv->client = pdata->clients + i;
+
+		icd->ops->set_bus_param		= sh_csi2_set_bus_param;
+		icd->ops->query_bus_param	= sh_csi2_query_bus_param;
+
+		pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev));
+
+		sh_csi2_hwinit(priv);
+		break;
+	case BUS_NOTIFY_UNBIND_DRIVER:
+		priv->client = NULL;
+
+		/* Driver is about to be unbound */
+		icd->ops->set_bus_param		= NULL;
+		icd->ops->query_bus_param	= NULL;
+
+		v4l2_device_unregister_subdev(&priv->subdev);
+
+		pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static __devinit int sh_csi2_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	unsigned int irq;
+	int ret;
+	struct sh_csi2 *priv;
+	/* Platform data specify the PHY, lanes, ECC, CRC */
+	struct sh_csi2_pdata *pdata = pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* Interrupt unused so far */
+	irq = platform_get_irq(pdev, 0);
+
+	if (!res || (int)irq <= 0 || !pdata) {
+		dev_err(&pdev->dev, "Not enough CSI2 platform resources.\n");
+		return -ENODEV;
+	}
+
+	/* TODO: Add support for CSI2I. Careful: different register layout! */
+	if (pdata->type != SH_CSI2C) {
+		dev_err(&pdev->dev, "Only CSI2C supported ATM.\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(struct sh_csi2), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->irq = irq;
+	priv->notifier.notifier_call = sh_csi2_notify;
+
+	/* We MUST attach after the MIPI sensor */
+	ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "CSI2 cannot register notifier\n");
+		goto ernotify;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "CSI2 register region already claimed\n");
+		ret = -EBUSY;
+		goto ereqreg;
+	}
+
+	priv->base = ioremap(res->start, resource_size(res));
+	if (!priv->base) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "Unable to ioremap CSI2 registers.\n");
+		goto eremap;
+	}
+
+	priv->pdev = pdev;
+
+	v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops);
+	v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
+
+	platform_set_drvdata(pdev, priv);
+
+	pm_runtime_enable(&pdev->dev);
+
+	dev_dbg(&pdev->dev, "CSI2 probed.\n");
+
+	return 0;
+
+eremap:
+	release_mem_region(res->start, resource_size(res));
+ereqreg:
+	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
+ernotify:
+	kfree(priv);
+
+	return ret;
+}
+
+static __devexit int sh_csi2_remove(struct platform_device *pdev)
+{
+	struct sh_csi2 *priv = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
+	pm_runtime_disable(&pdev->dev);
+	iounmap(priv->base);
+	release_mem_region(res->start, resource_size(res));
+	platform_set_drvdata(pdev, NULL);
+	kfree(priv);
+
+	return 0;
+}
+
+static struct platform_driver __refdata sh_csi2_pdrv = {
+	.remove  = __devexit_p(sh_csi2_remove),
+	.driver  = {
+		.name	= "sh-mobile-csi2",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init sh_csi2_init(void)
+{
+	return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe);
+}
+
+static void __exit sh_csi2_exit(void)
+{
+	platform_driver_unregister(&sh_csi2_pdrv);
+}
+
+module_init(sh_csi2_init);
+module_exit(sh_csi2_exit);
+
+MODULE_DESCRIPTION("SH-Mobile MIPI CSI-2 driver");
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sh-mobile-csi2");
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index f5b892a2a8e..d394187eb70 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/slab.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
 
@@ -57,7 +58,7 @@ enum sh_vou_status {
 };
 
 #define VOU_MAX_IMAGE_WIDTH	720
-#define VOU_MAX_IMAGE_HEIGHT	480
+#define VOU_MAX_IMAGE_HEIGHT	576
 
 struct sh_vou_device {
 	struct v4l2_device v4l2_dev;
@@ -527,20 +528,17 @@ struct sh_vou_geometry {
 static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
 {
 	/* The compiler cannot know, that best and idx will indeed be set */
-	unsigned int best_err = UINT_MAX, best = 0, width_max, height_max;
+	unsigned int best_err = UINT_MAX, best = 0, img_height_max;
 	int i, idx = 0;
 
-	if (std & V4L2_STD_525_60) {
-		width_max = 858;
-		height_max = 262;
-	} else {
-		width_max = 864;
-		height_max = 312;
-	}
+	if (std & V4L2_STD_525_60)
+		img_height_max = 480;
+	else
+		img_height_max = 576;
 
 	/* Image width must be a multiple of 4 */
 	v4l_bound_align_image(&geo->in_width, 0, VOU_MAX_IMAGE_WIDTH, 2,
-			      &geo->in_height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0);
+			      &geo->in_height, 0, img_height_max, 1, 0);
 
 	/* Select scales to come as close as possible to the output image */
 	for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) {
@@ -573,7 +571,7 @@ static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
 		unsigned int found = geo->output.height * vou_scale_v_den[i] /
 			vou_scale_v_num[i];
 
-		if (found > VOU_MAX_IMAGE_HEIGHT)
+		if (found > img_height_max)
 			/* scales increase */
 			break;
 
@@ -597,15 +595,18 @@ static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
  */
 static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std)
 {
-	unsigned int best_err = UINT_MAX, best, width_max, height_max;
+	unsigned int best_err = UINT_MAX, best, width_max, height_max,
+		img_height_max;
 	int i, idx;
 
 	if (std & V4L2_STD_525_60) {
 		width_max = 858;
 		height_max = 262 * 2;
+		img_height_max = 480;
 	} else {
 		width_max = 864;
 		height_max = 312 * 2;
+		img_height_max = 576;
 	}
 
 	/* Select scales to come as close as possible to the output image */
@@ -644,7 +645,7 @@ static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std)
 		unsigned int found = geo->in_height * vou_scale_v_num[i] /
 			vou_scale_v_den[i];
 
-		if (found > VOU_MAX_IMAGE_HEIGHT)
+		if (found > img_height_max)
 			/* scales increase */
 			break;
 
@@ -673,11 +674,12 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
 	struct video_device *vdev = video_devdata(file);
 	struct sh_vou_device *vou_dev = video_get_drvdata(vdev);
 	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	unsigned int img_height_max;
 	int pix_idx;
 	struct sh_vou_geometry geo;
 	struct v4l2_mbus_framefmt mbfmt = {
 		/* Revisit: is this the correct code? */
-		.code = V4L2_MBUS_FMT_YUYV8_2X8_LE,
+		.code = V4L2_MBUS_FMT_YUYV8_2X8,
 		.field = V4L2_FIELD_INTERLACED,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 	};
@@ -701,9 +703,14 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
 	if (pix_idx == ARRAY_SIZE(vou_fmt))
 		return -EINVAL;
 
+	if (vou_dev->std & V4L2_STD_525_60)
+		img_height_max = 480;
+	else
+		img_height_max = 576;
+
 	/* Image width must be a multiple of 4 */
 	v4l_bound_align_image(&pix->width, 0, VOU_MAX_IMAGE_WIDTH, 2,
-			      &pix->height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0);
+			      &pix->height, 0, img_height_max, 1, 0);
 
 	geo.in_width = pix->width;
 	geo.in_height = pix->height;
@@ -724,8 +731,8 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
 
 	/* Sanity checks */
 	if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH ||
-	    (unsigned)mbfmt.height > VOU_MAX_IMAGE_HEIGHT ||
-	    mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8_LE)
+	    (unsigned)mbfmt.height > img_height_max ||
+	    mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8)
 		return -EIO;
 
 	if (mbfmt.width != geo.output.width ||
@@ -936,10 +943,11 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a)
 	struct sh_vou_geometry geo;
 	struct v4l2_mbus_framefmt mbfmt = {
 		/* Revisit: is this the correct code? */
-		.code = V4L2_MBUS_FMT_YUYV8_2X8_LE,
+		.code = V4L2_MBUS_FMT_YUYV8_2X8,
 		.field = V4L2_FIELD_INTERLACED,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 	};
+	unsigned int img_height_max;
 	int ret;
 
 	dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u@%u:%u\n", __func__,
@@ -948,14 +956,19 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a)
 	if (a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
 		return -EINVAL;
 
+	if (vou_dev->std & V4L2_STD_525_60)
+		img_height_max = 480;
+	else
+		img_height_max = 576;
+
 	v4l_bound_align_image(&rect->width, 0, VOU_MAX_IMAGE_WIDTH, 1,
-			      &rect->height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0);
+			      &rect->height, 0, img_height_max, 1, 0);
 
 	if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH)
 		rect->left = VOU_MAX_IMAGE_WIDTH - rect->width;
 
-	if (rect->height + rect->top > VOU_MAX_IMAGE_HEIGHT)
-		rect->top = VOU_MAX_IMAGE_HEIGHT - rect->height;
+	if (rect->height + rect->top > img_height_max)
+		rect->top = img_height_max - rect->height;
 
 	geo.output = *rect;
 	geo.in_width = pix->width;
@@ -980,8 +993,8 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a)
 
 	/* Sanity checks */
 	if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH ||
-	    (unsigned)mbfmt.height > VOU_MAX_IMAGE_HEIGHT ||
-	    mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8_LE)
+	    (unsigned)mbfmt.height > img_height_max ||
+	    mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8)
 		return -EIO;
 
 	geo.output.width = mbfmt.width;
@@ -1329,13 +1342,13 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 	rect->left		= 0;
 	rect->top		= 0;
 	rect->width		= VOU_MAX_IMAGE_WIDTH;
-	rect->height		= VOU_MAX_IMAGE_HEIGHT;
+	rect->height		= 480;
 	pix->width		= VOU_MAX_IMAGE_WIDTH;
-	pix->height		= VOU_MAX_IMAGE_HEIGHT;
+	pix->height		= 480;
 	pix->pixelformat	= V4L2_PIX_FMT_YVYU;
 	pix->field		= V4L2_FIELD_NONE;
 	pix->bytesperline	= VOU_MAX_IMAGE_WIDTH * 2;
-	pix->sizeimage		= VOU_MAX_IMAGE_WIDTH * 2 * VOU_MAX_IMAGE_HEIGHT;
+	pix->sizeimage		= VOU_MAX_IMAGE_WIDTH * 2 * 480;
 	pix->colorspace		= V4L2_COLORSPACE_SMPTE170M;
 
 	region = request_mem_region(reg_res->start, resource_size(reg_res),
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 522ba3f4c28..b6643ca7656 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -62,8 +62,8 @@ static const struct usb_device_id sn9c102_id_table[] = {
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
 	/* SN9C103 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index db1ca0e90d7..f2032939fd4 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -200,7 +200,8 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int i, fmts = 0, raw_fmts = 0, ret;
+	unsigned int i, fmts = 0, raw_fmts = 0;
+	int ret;
 	enum v4l2_mbus_pixelcode code;
 
 	while (!v4l2_subdev_call(sd, video, enum_mbus_fmt, raw_fmts, &code))
@@ -1106,13 +1107,14 @@ static int soc_camera_resume(struct device *dev)
 	return ret;
 }
 
-static struct bus_type soc_camera_bus_type = {
+struct bus_type soc_camera_bus_type = {
 	.name		= "soc-camera",
 	.probe		= soc_camera_probe,
 	.remove		= soc_camera_remove,
 	.suspend	= soc_camera_suspend,
 	.resume		= soc_camera_resume,
 };
+EXPORT_SYMBOL_GPL(soc_camera_bus_type);
 
 static struct device_driver ic_drv = {
 	.name	= "camera",
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 10b003a8be8..bf406e89c99 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -56,8 +56,8 @@ soc_camera_platform_query_bus_param(struct soc_camera_device *icd)
 	return p->bus_param;
 }
 
-static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd,
-				       struct v4l2_mbus_framefmt *mf)
+static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd,
+					struct v4l2_mbus_framefmt *mf)
 {
 	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
 
@@ -65,13 +65,14 @@ static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd,
 	mf->height	= p->format.height;
 	mf->code	= p->format.code;
 	mf->colorspace	= p->format.colorspace;
+	mf->field	= p->format.field;
 
 	return 0;
 }
 
 static struct v4l2_subdev_core_ops platform_subdev_core_ops;
 
-static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, int index,
+static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 					enum v4l2_mbus_pixelcode *code)
 {
 	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
@@ -83,10 +84,45 @@ static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, int index,
 	return 0;
 }
 
+static int soc_camera_platform_g_crop(struct v4l2_subdev *sd,
+				      struct v4l2_crop *a)
+{
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
+
+	a->c.left	= 0;
+	a->c.top	= 0;
+	a->c.width	= p->format.width;
+	a->c.height	= p->format.height;
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int soc_camera_platform_cropcap(struct v4l2_subdev *sd,
+				       struct v4l2_cropcap *a)
+{
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
+
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= p->format.width;
+	a->bounds.height		= p->format.height;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops platform_subdev_video_ops = {
 	.s_stream	= soc_camera_platform_s_stream,
-	.try_mbus_fmt	= soc_camera_platform_try_fmt,
 	.enum_mbus_fmt	= soc_camera_platform_enum_fmt,
+	.cropcap	= soc_camera_platform_cropcap,
+	.g_crop		= soc_camera_platform_g_crop,
+	.try_mbus_fmt	= soc_camera_platform_fill_fmt,
+	.g_mbus_fmt	= soc_camera_platform_fill_fmt,
+	.s_mbus_fmt	= soc_camera_platform_fill_fmt,
 };
 
 static struct v4l2_subdev_ops platform_subdev_ops = {
diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c
index 8b63b6545e7..91391214c68 100644
--- a/drivers/media/video/soc_mediabus.c
+++ b/drivers/media/video/soc_mediabus.c
@@ -18,28 +18,28 @@
 #define MBUS_IDX(f) (V4L2_MBUS_FMT_ ## f - V4L2_MBUS_FMT_FIXED - 1)
 
 static const struct soc_mbus_pixelfmt mbus_fmt[] = {
-	[MBUS_IDX(YUYV8_2X8_LE)] = {
+	[MBUS_IDX(YUYV8_2X8)] = {
 		.fourcc			= V4L2_PIX_FMT_YUYV,
 		.name			= "YUYV",
 		.bits_per_sample	= 8,
 		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 		.order			= SOC_MBUS_ORDER_LE,
 	},
-	[MBUS_IDX(YVYU8_2X8_LE)] = {
+	[MBUS_IDX(YVYU8_2X8)] = {
 		.fourcc			= V4L2_PIX_FMT_YVYU,
 		.name			= "YVYU",
 		.bits_per_sample	= 8,
 		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 		.order			= SOC_MBUS_ORDER_LE,
 	},
-	[MBUS_IDX(YUYV8_2X8_BE)] = {
+	[MBUS_IDX(UYVY8_2X8)] = {
 		.fourcc			= V4L2_PIX_FMT_UYVY,
 		.name			= "UYVY",
 		.bits_per_sample	= 8,
 		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 		.order			= SOC_MBUS_ORDER_LE,
 	},
-	[MBUS_IDX(YVYU8_2X8_BE)] = {
+	[MBUS_IDX(VYUY8_2X8)] = {
 		.fourcc			= V4L2_PIX_FMT_VYUY,
 		.name			= "VYUY",
 		.bits_per_sample	= 8,
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
deleted file mode 100644
index 5938ad8702e..00000000000
--- a/drivers/media/video/stv680.c
+++ /dev/null
@@ -1,1565 +0,0 @@
-/*
- *  STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
- *
- * Thanks to STMicroelectronics for information on the usb commands, and
- * to Steve Miller at STM for his help and encouragement while I was
- * writing this driver.
- *
- * This driver is based heavily on the
- * Endpoints (formerly known as AOX) se401 USB Camera Driver
- * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
- *
- * Still somewhat based on the Linux ov511 driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History:
- * ver 0.1 October, 2001. Initial attempt.
- *
- * ver 0.2 November, 2001. Fixed asbility to resize, added brightness
- *                         function, made more stable (?)
- *
- * ver 0.21 Nov, 2001.     Added gamma correction and white balance,
- *                         due to Alexander Schwartz. Still trying to
- *                         improve stablility. Moved stuff into stv680.h
- *
- * ver 0.22 Nov, 2001.	   Added sharpen function (by Michael Sweet,
- *                         mike@easysw.com) from GIMP, also used in pencam.
- *                         Simple, fast, good integer math routine.
- *
- * ver 0.23 Dec, 2001 (gkh)
- * 			   Took out sharpen function, ran code through
- * 			   Lindent, and did other minor tweaks to get
- * 			   things to work properly with 2.5.1
- *
- * ver 0.24 Jan, 2002 (kjs)
- *                         Fixed the problem with webcam crashing after
- *                         two pictures. Changed the way pic is halved to
- *                         improve quality. Got rid of green line around
- *                         frame. Fix brightness reset when changing size
- *                         bug. Adjusted gamma filters slightly.
- *
- * ver 0.25 Jan, 2002 (kjs)
- *			   Fixed a bug in which the driver sometimes attempted
- *			   to set to a non-supported size. This allowed
- *			   gnomemeeting to work.
- *			   Fixed proc entry removal bug.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/pagemap.h>
-#include <linux/errno.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-#include "stv680.h"
-
-static int video_nr = -1;
-
-static int swapRGB;	/* 0 = default for auto select */
-
-/* 0 = default to allow auto select; -1 = swap never, +1 = swap always */
-static int swapRGB_on;
-
-static unsigned int debug;
-
-#define PDEBUG(level, fmt, args...) \
-	do { \
-	if (debug >= level)	\
-		printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt,	\
-			__func__, __LINE__ , ## args);	\
-	} while (0)
-
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.25"
-#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>"
-#define DRIVER_DESC "STV0680 USB Camera Driver"
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC (debug, "Debug enabled or not");
-module_param(swapRGB_on, int, 0);
-MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never");
-module_param(video_nr, int, 0);
-
-/********************************************************************
- *
- * Memory management
- *
- * This is a shameless copy from the USB-cpia driver (linux kernel
- * version 2.3.29 or so, I have no idea what this code actually does ;).
- * Actually it seems to be a copy of a shameless copy of the bttv-driver.
- * Or that is a copy of a shameless copy of ... (To the powers: is there
- * no generic kernel-function to do this sort of stuff?)
- *
- * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says
- * there will be one, but apparentely not yet -jerdfelt
- *
- * So I copied it again for the ov511 driver -claudio
- *
- * Same for the se401 driver -Jeroen
- *
- * And the STV0680 driver - Kevin
- ********************************************************************/
-static void *rvmalloc (unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32 (size);
-	if (!mem)
-		return NULL;
-
-	memset (mem, 0, size);	/* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	return mem;
-}
-
-static void rvfree (void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree (mem);
-}
-
-
-/*********************************************************************
- * pencam read/write functions
- ********************************************************************/
-
-static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size)
-{
-	int ret = -1;
-
-	switch (set) {
-	case 0:		/*  0xc1  */
-		ret = usb_control_msg (stv680->udev,
-				       usb_rcvctrlpipe (stv680->udev, 0),
-				       req,
-				       (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
-				       value, 0, buffer, size, PENCAM_TIMEOUT);
-		break;
-
-	case 1:		/*  0x41  */
-		ret = usb_control_msg (stv680->udev,
-				       usb_sndctrlpipe (stv680->udev, 0),
-				       req,
-				       (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
-				       value, 0, buffer, size, PENCAM_TIMEOUT);
-		break;
-
-	case 2:		/*  0x80  */
-		ret = usb_control_msg (stv680->udev,
-				       usb_rcvctrlpipe (stv680->udev, 0),
-				       req,
-				       (USB_DIR_IN | USB_RECIP_DEVICE),
-				       value, 0, buffer, size, PENCAM_TIMEOUT);
-		break;
-
-	case 3:		/*  0x40  */
-		ret = usb_control_msg (stv680->udev,
-				       usb_sndctrlpipe (stv680->udev, 0),
-				       req,
-				       (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE),
-				       value, 0, buffer, size, PENCAM_TIMEOUT);
-		break;
-
-	}
-	if ((ret < 0) && (req != 0x0a)) {
-		PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret);
-	}
-	return ret;
-}
-
-static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate)
-{
-
-	if (configuration != dev->udev->actconfig->desc.bConfigurationValue
-			|| usb_reset_configuration (dev->udev) < 0) {
-		PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration);
-		return -1;
-	}
-	if (usb_set_interface (dev->udev, interface, alternate) < 0) {
-		PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate);
-		return -1;
-	}
-	return 0;
-}
-
-static int stv_stop_video (struct usb_stv *dev)
-{
-	int i;
-	unsigned char *buf;
-
-	buf = kmalloc (40, GFP_KERNEL);
-	if (buf == NULL) {
-		PDEBUG (0, "STV(e): Out of (small buf) memory");
-		return -1;
-	}
-
-	/* this is a high priority command; it stops all lower order commands */
-	if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) {
-		i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02);	/* Get Last Error; 2 = busy */
-		PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buf[0], buf[1]);
-	} else {
-		PDEBUG (1, "STV(i): Camera reset to idle mode.");
-	}
-
-	if ((i = stv_set_config (dev, 1, 0, 0)) < 0)
-		PDEBUG (1, "STV(e): Reset config during exit failed");
-
-	/*  get current mode  */
-	buf[0] = 0xf0;
-	if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08)	/* get mode */
-		PDEBUG (0, "STV(e): Stop_video: problem setting original mode");
-	if (dev->origMode != buf[0]) {
-		memset (buf, 0, 8);
-		buf[0] = (unsigned char) dev->origMode;
-		if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) {
-			PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed");
-			i = -1;
-		}
-		buf[0] = 0xf0;
-		i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08);
-		if ((i != 0x08) || (buf[0] != dev->origMode)) {
-			PDEBUG (0, "STV(e): camera NOT set to original resolution.");
-			i = -1;
-		} else
-			PDEBUG (0, "STV(i): Camera set to original resolution");
-	}
-	/* origMode */
-	kfree(buf);
-	return i;
-}
-
-static int stv_set_video_mode (struct usb_stv *dev)
-{
-	int i, stop_video = 1;
-	unsigned char *buf;
-
-	buf = kmalloc (40, GFP_KERNEL);
-	if (buf == NULL) {
-		PDEBUG (0, "STV(e): Out of (small buf) memory");
-		return -1;
-	}
-
-	if ((i = stv_set_config (dev, 1, 0, 0)) < 0) {
-		kfree(buf);
-		return i;
-	}
-
-	i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12);
-	if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) {
-		PDEBUG (1, "STV(e): Could not get descriptor 0100.");
-		goto error;
-	}
-
-	/*  set alternate interface 1 */
-	if ((i = stv_set_config (dev, 1, 0, 1)) < 0)
-		goto error;
-
-	if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10)
-		goto error;
-	PDEBUG (1, "STV(i): Setting video mode.");
-	/*  Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240)  */
-	if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) {
-		stop_video = 0;
-		goto error;
-	}
-	goto exit;
-
-error:
-	kfree(buf);
-	if (stop_video == 1)
-		stv_stop_video (dev);
-	return -1;
-
-exit:
-	kfree(buf);
-	return 0;
-}
-
-static int stv_init (struct usb_stv *stv680)
-{
-	int i = 0;
-	unsigned char *buffer;
-	unsigned long int bufsize;
-
-	buffer = kzalloc (40, GFP_KERNEL);
-	if (buffer == NULL) {
-		PDEBUG (0, "STV(e): Out of (small buf) memory");
-		return -1;
-	}
-	udelay (100);
-
-	/* set config 1, interface 0, alternate 0 */
-	if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) {
-		kfree(buffer);
-		PDEBUG (0, "STV(e): set config 1,0,0 failed");
-		return -1;
-	}
-	/* ping camera to be sure STV0680 is present */
-	if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02)
-		goto error;
-	if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) {
-		PDEBUG (1, "STV(e): camera ping failed!!");
-		goto error;
-	}
-
-	/* get camera descriptor */
-	if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09)
-		goto error;
-	i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22);
-	if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) {
-		PDEBUG (1, "STV(e): Could not get descriptor 0200.");
-		goto error;
-	}
-	if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02)
-		goto error;
-	if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24)
-		goto error;
-	if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
-		goto error;
-
-	stv680->SupportedModes = buffer[7];
-	i = stv680->SupportedModes;
-	stv680->CIF = 0;
-	stv680->VGA = 0;
-	stv680->QVGA = 0;
-	if (i & 1)
-		stv680->CIF = 1;
-	if (i & 2)
-		stv680->VGA = 1;
-	if (i & 8)
-		stv680->QVGA = 1;
-	if (stv680->SupportedModes == 0) {
-		PDEBUG (0, "STV(e): There are NO supported STV680 modes!!");
-		i = -1;
-		goto error;
-	} else {
-		if (stv680->CIF)
-			PDEBUG (0, "STV(i): CIF is supported");
-		if (stv680->QVGA)
-			PDEBUG (0, "STV(i): QVGA is supported");
-	}
-	/* FW rev, ASIC rev, sensor ID  */
-	PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]);
-	PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]);
-	PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4));
-
-	/*  set alternate interface 1 */
-	if ((i = stv_set_config (stv680, 1, 0, 1)) < 0)
-		goto error;
-
-	if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
-		goto error;
-	if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08)
-		goto error;
-	i = buffer[3];
-	PDEBUG (0, "STV(i): Camera has %i pictures.", i);
-
-	/*  get current mode */
-	if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08)
-		goto error;
-	stv680->origMode = buffer[0];	/* 01 = VGA, 03 = QVGA, 00 = CIF */
-
-	/* This will attemp CIF mode, if supported. If not, set to QVGA  */
-	memset (buffer, 0, 8);
-	if (stv680->CIF)
-		buffer[0] = 0x00;
-	else if (stv680->QVGA)
-		buffer[0] = 0x03;
-	if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) {
-		PDEBUG (0, "STV(i): Set_Camera_Mode failed");
-		i = -1;
-		goto error;
-	}
-	buffer[0] = 0xf0;
-	stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08);
-	if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) {
-		PDEBUG (0, "STV(e): Error setting camera video mode!");
-		i = -1;
-		goto error;
-	} else {
-		if (buffer[0] == 0) {
-			stv680->VideoMode = 0x0000;
-			PDEBUG (0, "STV(i): Video Mode set to CIF");
-		}
-		if (buffer[0] == 0x03) {
-			stv680->VideoMode = 0x0300;
-			PDEBUG (0, "STV(i): Video Mode set to QVGA");
-		}
-	}
-	if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10)
-		goto error;
-	bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]);
-	stv680->cwidth = (buffer[4] << 8) | (buffer[5]);	/* ->camera = 322, 356, 644  */
-	stv680->cheight = (buffer[6] << 8) | (buffer[7]);	/* ->camera = 242, 292, 484  */
-	stv680->origGain = buffer[12];
-
-	goto exit;
-
-error:
-	i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02);	/* Get Last Error */
-	PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buffer[0], buffer[1]);
-	kfree(buffer);
-	return -1;
-
-exit:
-	kfree(buffer);
-
-	/* video = 320x240, 352x288 */
-	if (stv680->CIF == 1) {
-		stv680->maxwidth = 352;
-		stv680->maxheight = 288;
-		stv680->vwidth = 352;
-		stv680->vheight = 288;
-	}
-	if (stv680->QVGA == 1) {
-		stv680->maxwidth = 320;
-		stv680->maxheight = 240;
-		stv680->vwidth = 320;
-		stv680->vheight = 240;
-	}
-
-	stv680->rawbufsize = bufsize;	/* must be ./. by 8 */
-	stv680->maxframesize = bufsize * 3;	/* RGB size */
-	PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight);
-	PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize);
-
-	/* some default values */
-	stv680->bulk_in_endpointAddr = 0x82;
-	stv680->dropped = 0;
-	stv680->error = 0;
-	stv680->framecount = 0;
-	stv680->readcount = 0;
-	stv680->streaming = 0;
-	/* bright, white, colour, hue, contrast are set by software, not in stv0680 */
-	stv680->brightness = 32767;
-	stv680->chgbright = 0;
-	stv680->whiteness = 0;	/* only for greyscale */
-	stv680->colour = 32767;
-	stv680->contrast = 32767;
-	stv680->hue = 32767;
-	stv680->palette = STV_VIDEO_PALETTE;
-	stv680->depth = 24;	/* rgb24 bits */
-	if ((swapRGB_on == 0) && (swapRGB == 0))
-		PDEBUG (1, "STV(i): swapRGB is (auto) OFF");
-	else if ((swapRGB_on == 0) && (swapRGB == 1))
-		PDEBUG (1, "STV(i): swapRGB is (auto) ON");
-	else if (swapRGB_on == 1)
-		PDEBUG (1, "STV(i): swapRGB is (forced) ON");
-	else if (swapRGB_on == -1)
-		PDEBUG (1, "STV(i): swapRGB is (forced) OFF");
-
-	if (stv_set_video_mode (stv680) < 0) {
-		PDEBUG (0, "STV(e): Could not set video mode in stv_init");
-		return -1;
-	}
-
-	return 0;
-}
-
-/***************** last of pencam  routines  *******************/
-
-/****************************************************************************
- *  sysfs
- ***************************************************************************/
-#define stv680_file(name, variable, field)				\
-static ssize_t show_##name(struct device *class_dev,			\
-			   struct device_attribute *attr, char *buf)	\
-{									\
-	struct video_device *vdev = to_video_device(class_dev);		\
-	struct usb_stv *stv = video_get_drvdata(vdev);			\
-	return sprintf(buf, field, stv->variable);			\
-}									\
-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
-
-stv680_file(model, camera_name, "%s\n");
-stv680_file(in_use, user, "%d\n");
-stv680_file(streaming, streaming, "%d\n");
-stv680_file(palette, palette, "%i\n");
-stv680_file(frames_total, readcount, "%d\n");
-stv680_file(frames_read, framecount, "%d\n");
-stv680_file(packets_dropped, dropped, "%d\n");
-stv680_file(decoding_errors, error, "%d\n");
-
-static int stv680_create_sysfs_files(struct video_device *vdev)
-{
-	int rc;
-
-	rc = device_create_file(&vdev->dev, &dev_attr_model);
-	if (rc) goto err;
-	rc = device_create_file(&vdev->dev, &dev_attr_in_use);
-	if (rc) goto err_model;
-	rc = device_create_file(&vdev->dev, &dev_attr_streaming);
-	if (rc) goto err_inuse;
-	rc = device_create_file(&vdev->dev, &dev_attr_palette);
-	if (rc) goto err_stream;
-	rc = device_create_file(&vdev->dev, &dev_attr_frames_total);
-	if (rc) goto err_pal;
-	rc = device_create_file(&vdev->dev, &dev_attr_frames_read);
-	if (rc) goto err_framtot;
-	rc = device_create_file(&vdev->dev, &dev_attr_packets_dropped);
-	if (rc) goto err_framread;
-	rc = device_create_file(&vdev->dev, &dev_attr_decoding_errors);
-	if (rc) goto err_dropped;
-
-	return 0;
-
-err_dropped:
-	device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
-err_framread:
-	device_remove_file(&vdev->dev, &dev_attr_frames_read);
-err_framtot:
-	device_remove_file(&vdev->dev, &dev_attr_frames_total);
-err_pal:
-	device_remove_file(&vdev->dev, &dev_attr_palette);
-err_stream:
-	device_remove_file(&vdev->dev, &dev_attr_streaming);
-err_inuse:
-	device_remove_file(&vdev->dev, &dev_attr_in_use);
-err_model:
-	device_remove_file(&vdev->dev, &dev_attr_model);
-err:
-	PDEBUG(0, "STV(e): Could not create sysfs files");
-	return rc;
-}
-
-static void stv680_remove_sysfs_files(struct video_device *vdev)
-{
-	device_remove_file(&vdev->dev, &dev_attr_model);
-	device_remove_file(&vdev->dev, &dev_attr_in_use);
-	device_remove_file(&vdev->dev, &dev_attr_streaming);
-	device_remove_file(&vdev->dev, &dev_attr_palette);
-	device_remove_file(&vdev->dev, &dev_attr_frames_total);
-	device_remove_file(&vdev->dev, &dev_attr_frames_read);
-	device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
-	device_remove_file(&vdev->dev, &dev_attr_decoding_errors);
-}
-
-/********************************************************************
- * Camera control
- *******************************************************************/
-
-static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p)
-{
-	/* This sets values for v4l interface. max/min = 65535/0  */
-
-	p->brightness = stv680->brightness;
-	p->whiteness = stv680->whiteness;	/* greyscale */
-	p->colour = stv680->colour;
-	p->contrast = stv680->contrast;
-	p->hue = stv680->hue;
-	p->palette = stv680->palette;
-	p->depth = stv680->depth;
-	return 0;
-}
-
-static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p)
-{
-	/* See above stv680_get_pict  */
-
-	if (p->palette != STV_VIDEO_PALETTE) {
-		PDEBUG (2, "STV(e): Palette set error in _set_pic");
-		return 1;
-	}
-
-	if (stv680->brightness != p->brightness) {
-		stv680->chgbright = 1;
-		stv680->brightness = p->brightness;
-	}
-
-	stv680->whiteness = p->whiteness;	/* greyscale */
-	stv680->colour = p->colour;
-	stv680->contrast = p->contrast;
-	stv680->hue = p->hue;
-	stv680->palette = p->palette;
-	stv680->depth = p->depth;
-
-	return 0;
-}
-
-static void stv680_video_irq (struct urb *urb)
-{
-	struct usb_stv *stv680 = urb->context;
-	int length = urb->actual_length;
-
-	if (length < stv680->rawbufsize)
-		PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length);
-
-	/* ohoh... */
-	if (!stv680->streaming)
-		return;
-
-	if (!stv680->udev) {
-		PDEBUG (0, "STV(e): device vapourished in video_irq");
-		return;
-	}
-
-	/* 0 sized packets happen if we are to fast, but sometimes the camera
-	   keeps sending them forever...
-	 */
-	if (length && !urb->status) {
-		stv680->nullpackets = 0;
-		switch (stv680->scratch[stv680->scratch_next].state) {
-		case BUFFER_READY:
-		case BUFFER_BUSY:
-			stv680->dropped++;
-			break;
-
-		case BUFFER_UNUSED:
-			memcpy (stv680->scratch[stv680->scratch_next].data,
-				(unsigned char *) urb->transfer_buffer, length);
-			stv680->scratch[stv680->scratch_next].state = BUFFER_READY;
-			stv680->scratch[stv680->scratch_next].length = length;
-			if (waitqueue_active (&stv680->wq)) {
-				wake_up_interruptible (&stv680->wq);
-			}
-			stv680->scratch_overflow = 0;
-			stv680->scratch_next++;
-			if (stv680->scratch_next >= STV680_NUMSCRATCH)
-				stv680->scratch_next = 0;
-			break;
-		}		/* switch  */
-	} else {
-		stv680->nullpackets++;
-		if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
-			if (waitqueue_active (&stv680->wq)) {
-				wake_up_interruptible (&stv680->wq);
-			}
-		}
-	}			/*  if - else */
-
-	/* Resubmit urb for new data */
-	urb->status = 0;
-	urb->dev = stv680->udev;
-	if (usb_submit_urb (urb, GFP_ATOMIC))
-		PDEBUG (0, "STV(e): urb burned down in video irq");
-	return;
-}				/*  _video_irq  */
-
-static int stv680_start_stream (struct usb_stv *stv680)
-{
-	struct urb *urb;
-	int err = 0, i;
-
-	stv680->streaming = 1;
-
-	/* Do some memory allocation */
-	for (i = 0; i < STV680_NUMFRAMES; i++) {
-		stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize;
-		stv680->frame[i].curpix = 0;
-	}
-	/* packet size = 4096  */
-	for (i = 0; i < STV680_NUMSBUF; i++) {
-		stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
-		if (stv680->sbuf[i].data == NULL) {
-			PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i);
-			goto nomem_err;
-		}
-	}
-
-	stv680->scratch_next = 0;
-	stv680->scratch_use = 0;
-	stv680->scratch_overflow = 0;
-	for (i = 0; i < STV680_NUMSCRATCH; i++) {
-		stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
-		if (stv680->scratch[i].data == NULL) {
-			PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i);
-			goto nomem_err;
-		}
-		stv680->scratch[i].state = BUFFER_UNUSED;
-	}
-
-	for (i = 0; i < STV680_NUMSBUF; i++) {
-		urb = usb_alloc_urb (0, GFP_KERNEL);
-		if (!urb)
-			goto nomem_err;
-
-		/* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */
-		usb_fill_bulk_urb (urb, stv680->udev,
-				   usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr),
-				   stv680->sbuf[i].data, stv680->rawbufsize,
-				   stv680_video_irq, stv680);
-		stv680->urb[i] = urb;
-		err = usb_submit_urb (stv680->urb[i], GFP_KERNEL);
-		if (err) {
-			PDEBUG (0, "STV(e): urb burned down with err "
-				   "%d in start stream %d", err, i);
-			goto nomem_err;
-		}
-	}			/* i STV680_NUMSBUF */
-
-	stv680->framecount = 0;
-	return 0;
-
- nomem_err:
-	for (i = 0; i < STV680_NUMSBUF; i++) {
-		usb_kill_urb(stv680->urb[i]);
-		usb_free_urb(stv680->urb[i]);
-		stv680->urb[i] = NULL;
-		kfree(stv680->sbuf[i].data);
-		stv680->sbuf[i].data = NULL;
-	}
-	/* used in irq, free only as all URBs are dead */
-	for (i = 0; i < STV680_NUMSCRATCH; i++) {
-		kfree(stv680->scratch[i].data);
-		stv680->scratch[i].data = NULL;
-	}
-	return -ENOMEM;
-
-}
-
-static int stv680_stop_stream (struct usb_stv *stv680)
-{
-	int i;
-
-	if (!stv680->streaming || !stv680->udev)
-		return 1;
-
-	stv680->streaming = 0;
-
-	for (i = 0; i < STV680_NUMSBUF; i++)
-		if (stv680->urb[i]) {
-			usb_kill_urb (stv680->urb[i]);
-			usb_free_urb (stv680->urb[i]);
-			stv680->urb[i] = NULL;
-			kfree(stv680->sbuf[i].data);
-		}
-	for (i = 0; i < STV680_NUMSCRATCH; i++) {
-		kfree(stv680->scratch[i].data);
-		stv680->scratch[i].data = NULL;
-	}
-
-	return 0;
-}
-
-static int stv680_set_size (struct usb_stv *stv680, int width, int height)
-{
-	int wasstreaming = stv680->streaming;
-
-	/* Check to see if we need to change */
-	if ((stv680->vwidth == width) && (stv680->vheight == height))
-		return 0;
-
-	PDEBUG (1, "STV(i): size request for %i x %i", width, height);
-	/* Check for a valid mode */
-	if ((!width || !height) || ((width & 1) || (height & 1))) {
-		PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
-		return 1;
-	}
-
-	if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) {
-		width = stv680->maxwidth / 2;
-		height = stv680->maxheight / 2;
-	} else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) {
-		width = 160;
-		height = 120;
-	} else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) {
-		width = 176;
-		height = 144;
-	} else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) {
-		width = 320;
-		height = 240;
-	} else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) {
-		width = 352;
-		height = 288;
-	} else {
-		PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
-		return 1;
-	}
-
-	/* Stop a current stream and start it again at the new size */
-	if (wasstreaming)
-		stv680_stop_stream (stv680);
-	stv680->vwidth = width;
-	stv680->vheight = height;
-	PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight);
-	if (wasstreaming)
-		stv680_start_stream (stv680);
-
-	return 0;
-}
-
-/**********************************************************************
- * Video Decoding
- **********************************************************************/
-
-/*******  routines from the pencam program; hey, they work!  ********/
-
-/*
- * STV0680 Vision Camera Chipset Driver
- * Copyright (C) 2000 Adam Harrison <adam@antispin.org>
-*/
-
-#define RED 0
-#define GREEN 1
-#define BLUE 2
-#define AD(x, y, w) (((y)*(w)+(x))*3)
-
-static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer)
-{
-	int x, y, i;
-	int w = stv680->cwidth;
-	int vw = stv680->cwidth, vh = stv680->cheight;
-	unsigned int p = 0;
-	int colour = 0, bayer = 0;
-	unsigned char *raw = buffer->data;
-	struct stv680_frame *frame = &stv680->frame[stv680->curframe];
-	unsigned char *output = frame->data;
-	unsigned char *temp = frame->data;
-	int offset = buffer->offset;
-
-	if (frame->curpix == 0) {
-		if (frame->grabstate == FRAME_READY) {
-			frame->grabstate = FRAME_GRABBING;
-		}
-	}
-	if (offset != frame->curpix) {	/* Regard frame as lost :( */
-		frame->curpix = 0;
-		stv680->error++;
-		return;
-	}
-
-	if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) {
-		vw = 320;
-		vh = 240;
-	}
-	if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) {
-		vw = 352;
-		vh = 288;
-	}
-
-	memset (output, 0, 3 * vw * vh);	/* clear output matrix. */
-
-	for (y = 0; y < vh; y++) {
-		for (x = 0; x < vw; x++) {
-			if (x & 1)
-				p = *(raw + y * w + (x >> 1));
-			else
-				p = *(raw + y * w + (x >> 1) + (w >> 1));
-
-			if (y & 1)
-				bayer = 2;
-			else
-				bayer = 0;
-			if (x & 1)
-				bayer++;
-
-			switch (bayer) {
-			case 0:
-			case 3:
-				colour = 1;
-				break;
-			case 1:
-				colour = 0;
-				break;
-			case 2:
-				colour = 2;
-				break;
-			}
-			i = (y * vw + x) * 3;
-			*(output + i + colour) = (unsigned char) p;
-		}		/* for x */
-
-	}			/* for y */
-
-	/****** gamma correction plus hardcoded white balance */
-	/* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code.
-	   Correction values red[], green[], blue[], are generated by
-	   (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
-	   White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
-	   converted to unsigned char. Values are in stv680.h  */
-
-	for (y = 0; y < vh; y++) {
-		for (x = 0; x < vw; x++) {
-			i = (y * vw + x) * 3;
-			*(output + i) = red[*(output + i)];
-			*(output + i + 1) = green[*(output + i + 1)];
-			*(output + i + 2) = blue[*(output + i + 2)];
-		}
-	}
-
-	/******  bayer demosaic  ******/
-	for (y = 1; y < (vh - 1); y++) {
-		for (x = 1; x < (vw - 1); x++) {	/* work out pixel type */
-			if (y & 1)
-				bayer = 0;
-			else
-				bayer = 2;
-			if (!(x & 1))
-				bayer++;
-
-			switch (bayer) {
-			case 0:	/* green. blue lr, red tb */
-				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1;
-				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1;
-				break;
-
-			case 1:	/* blue. green lrtb, red diagonals */
-				*(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
-				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2;
-				break;
-
-			case 2:	/* red. green lrtb, blue diagonals */
-				*(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
-				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2;
-				break;
-
-			case 3:	/* green. red lr, blue tb */
-				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1;
-				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1;
-				break;
-			}	/* switch */
-		}		/* for x */
-	}			/* for y  - end demosaic  */
-
-	/* fix top and bottom row, left and right side */
-	i = vw * 3;
-	memcpy (output, (output + i), i);
-	memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i);
-	for (y = 0; y < vh; y++) {
-		i = y * vw * 3;
-		memcpy ((output + i), (output + i + 3), 3);
-		memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3);
-	}
-
-	/*  process all raw data, then trim to size if necessary */
-	if ((stv680->vwidth == 160) || (stv680->vwidth == 176))  {
-		i = 0;
-		for (y = 0; y < vh; y++) {
-			if (!(y & 1)) {
-				for (x = 0; x < vw; x++) {
-					p = (y * vw + x) * 3;
-					if (!(x & 1)) {
-						*(output + i) = *(output + p);
-						*(output + i + 1) = *(output + p + 1);
-						*(output + i + 2) = *(output + p + 2);
-						i += 3;
-					}
-				}  /* for x */
-			}
-		}  /* for y */
-	}
-	/* reset to proper width */
-	if ((stv680->vwidth == 160)) {
-		vw = 160;
-		vh = 120;
-	}
-	if ((stv680->vwidth == 176)) {
-		vw = 176;
-		vh = 144;
-	}
-
-	/* output is RGB; some programs want BGR  */
-	/* swapRGB_on=0 -> program decides;  swapRGB_on=1, always swap */
-	/* swapRGB_on=-1, never swap */
-	if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) {
-		for (y = 0; y < vh; y++) {
-			for (x = 0; x < vw; x++) {
-				i = (y * vw + x) * 3;
-				*(temp) = *(output + i);
-				*(output + i) = *(output + i + 2);
-				*(output + i + 2) = *(temp);
-			}
-		}
-	}
-	/* brightness */
-	if (stv680->chgbright == 1) {
-		if (stv680->brightness >= 32767) {
-			p = (stv680->brightness - 32767) / 256;
-			for (x = 0; x < (vw * vh * 3); x++) {
-				if ((*(output + x) + (unsigned char) p) > 255)
-					*(output + x) = 255;
-				else
-					*(output + x) += (unsigned char) p;
-			}	/* for */
-		} else {
-			p = (32767 - stv680->brightness) / 256;
-			for (x = 0; x < (vw * vh * 3); x++) {
-				if ((unsigned char) p > *(output + x))
-					*(output + x) = 0;
-				else
-					*(output + x) -= (unsigned char) p;
-			}	/* for */
-		}		/* else */
-	}
-	/* if */
-	frame->curpix = 0;
-	frame->curlinepix = 0;
-	frame->grabstate = FRAME_DONE;
-	stv680->framecount++;
-	stv680->readcount++;
-	if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) {
-		stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1);
-	}
-
-}				/* bayer_unshuffle */
-
-/*******  end routines from the pencam program  *********/
-
-static int stv680_newframe (struct usb_stv *stv680, int framenr)
-{
-	int errors = 0;
-
-	while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) {
-		if (!stv680->frame[framenr].curpix) {
-			errors++;
-		}
-		wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY));
-
-		if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
-			stv680->nullpackets = 0;
-			PDEBUG (2, "STV(i): too many null length packets, restarting capture");
-			stv680_stop_stream (stv680);
-			stv680_start_stream (stv680);
-		} else {
-			if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) {
-				stv680->frame[framenr].grabstate = FRAME_ERROR;
-				PDEBUG (2, "STV(e): FRAME_ERROR in _newframe");
-				return -EIO;
-			}
-			stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY;
-
-			bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]);
-
-			stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED;
-			stv680->scratch_use++;
-			if (stv680->scratch_use >= STV680_NUMSCRATCH)
-				stv680->scratch_use = 0;
-			if (errors > STV680_MAX_ERRORS) {
-				errors = 0;
-				PDEBUG (2, "STV(i): too many errors, restarting capture");
-				stv680_stop_stream (stv680);
-				stv680_start_stream (stv680);
-			}
-		}		/* else */
-	}			/* while */
-	return 0;
-}
-
-/*********************************************************************
- * Video4Linux
- *********************************************************************/
-
-static int stv_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct usb_stv *stv680 = video_get_drvdata(dev);
-	int err = 0;
-
-	/* we are called with the BKL held */
-	lock_kernel();
-	stv680->user = 1;
-	err = stv_init (stv680);	/* main initialization routine for camera */
-
-	if (err >= 0) {
-		stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES);
-		if (!stv680->fbuf) {
-			PDEBUG (0, "STV(e): Could not rvmalloc frame bufer");
-			err = -ENOMEM;
-		}
-		file->private_data = dev;
-	}
-	if (err)
-		stv680->user = 0;
-	unlock_kernel();
-
-	return err;
-}
-
-static int stv_close(struct file *file)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_stv *stv680 = video_get_drvdata(dev);
-	int i;
-
-	for (i = 0; i < STV680_NUMFRAMES; i++)
-		stv680->frame[i].grabstate = FRAME_UNUSED;
-	if (stv680->streaming)
-		stv680_stop_stream (stv680);
-
-	if ((i = stv_stop_video (stv680)) < 0)
-		PDEBUG (1, "STV(e): stop_video failed in stv_close");
-
-	rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES);
-	stv680->user = 0;
-
-	if (stv680->removed) {
-		kfree(stv680);
-		stv680 = NULL;
-		PDEBUG (0, "STV(i): device unregistered");
-	}
-	file->private_data = NULL;
-	return 0;
-}
-
-static long stv680_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_stv *stv680 = video_get_drvdata(vdev);
-
-	if (!stv680->udev)
-		return -EIO;
-
-	switch (cmd) {
-	case VIDIOCGCAP:{
-			struct video_capability *b = arg;
-
-			strcpy (b->name, stv680->camera_name);
-			b->type = VID_TYPE_CAPTURE;
-			b->channels = 1;
-			b->audios = 0;
-			b->maxwidth = stv680->maxwidth;
-			b->maxheight = stv680->maxheight;
-			b->minwidth = stv680->maxwidth / 2;
-			b->minheight = stv680->maxheight / 2;
-			return 0;
-		}
-	case VIDIOCGCHAN:{
-			struct video_channel *v = arg;
-
-			if (v->channel != 0)
-				return -EINVAL;
-			v->flags = 0;
-			v->tuners = 0;
-			v->type = VIDEO_TYPE_CAMERA;
-			strcpy (v->name, "STV Camera");
-			return 0;
-		}
-	case VIDIOCSCHAN:{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCGPICT:{
-			struct video_picture *p = arg;
-
-			stv680_get_pict (stv680, p);
-			return 0;
-		}
-	case VIDIOCSPICT:{
-			struct video_picture *p = arg;
-
-			if (stv680_set_pict (stv680, p))
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCSWIN:{
-			struct video_window *vw = arg;
-
-			if (vw->flags)
-				return -EINVAL;
-			if (vw->clipcount)
-				return -EINVAL;
-			if (vw->width != stv680->vwidth) {
-				if (stv680_set_size (stv680, vw->width, vw->height)) {
-					PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN");
-					return -EINVAL;
-				}
-			}
-			return 0;
-		}
-	case VIDIOCGWIN:{
-			struct video_window *vw = arg;
-
-			vw->x = 0;	/* FIXME */
-			vw->y = 0;
-			vw->chromakey = 0;
-			vw->flags = 0;
-			vw->clipcount = 0;
-			vw->width = stv680->vwidth;
-			vw->height = stv680->vheight;
-			return 0;
-		}
-	case VIDIOCGMBUF:{
-			struct video_mbuf *vm = arg;
-			int i;
-
-			memset (vm, 0, sizeof (*vm));
-			vm->size = STV680_NUMFRAMES * stv680->maxframesize;
-			vm->frames = STV680_NUMFRAMES;
-			for (i = 0; i < STV680_NUMFRAMES; i++)
-				vm->offsets[i] = stv680->maxframesize * i;
-			return 0;
-		}
-	case VIDIOCMCAPTURE:{
-			struct video_mmap *vm = arg;
-
-			if (vm->format != STV_VIDEO_PALETTE) {
-				PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)",
-					vm->format, STV_VIDEO_PALETTE);
-				if ((vm->format == 3) && (swapRGB_on == 0))  {
-					PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON");
-					/* this may fix those apps (e.g., xawtv) that want BGR */
-					swapRGB = 1;
-				}
-				return -EINVAL;
-			}
-			if (vm->frame >= STV680_NUMFRAMES) {
-				PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES");
-				return -EINVAL;
-			}
-			if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR)
-			    || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) {
-				PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error",
-					stv680->frame[vm->frame].grabstate);
-				return -EBUSY;
-			}
-			/* Is this according to the v4l spec??? */
-			if (stv680->vwidth != vm->width) {
-				if (stv680_set_size (stv680, vm->width, vm->height)) {
-					PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed");
-					return -EINVAL;
-				}
-			}
-			stv680->frame[vm->frame].grabstate = FRAME_READY;
-
-			if (!stv680->streaming)
-				stv680_start_stream (stv680);
-
-			return 0;
-		}
-	case VIDIOCSYNC:{
-			int *frame = arg;
-			int ret = 0;
-
-			if (*frame < 0 || *frame >= STV680_NUMFRAMES) {
-				PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC");
-				return -EINVAL;
-			}
-			ret = stv680_newframe (stv680, *frame);
-			stv680->frame[*frame].grabstate = FRAME_UNUSED;
-			return ret;
-		}
-	case VIDIOCGFBUF:{
-			struct video_buffer *vb = arg;
-
-			memset (vb, 0, sizeof (*vb));
-			return 0;
-		}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-		{
-			PDEBUG (2, "STV(e): VIDIOCCAPTURE failed");
-			return -EINVAL;
-		}
-	case VIDIOCSFBUF:
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
-	default:
-		return -ENOIOCTLCMD;
-	}			/* end switch */
-
-	return 0;
-}
-
-static long stv680_ioctl(struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, stv680_do_ioctl);
-}
-
-static int stv680_mmap (struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_stv *stv680 = video_get_drvdata(dev);
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	unsigned long page, pos;
-
-	mutex_lock(&stv680->lock);
-
-	if (stv680->udev == NULL) {
-		mutex_unlock(&stv680->lock);
-		return -EIO;
-	}
-	if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1)
-		    & ~(PAGE_SIZE - 1))) {
-		mutex_unlock(&stv680->lock);
-		return -EINVAL;
-	}
-	pos = (unsigned long) stv680->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&stv680->lock);
-			return -EAGAIN;
-		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-	mutex_unlock(&stv680->lock);
-
-	return 0;
-}
-
-static ssize_t stv680_read (struct file *file, char __user *buf,
-			size_t count, loff_t *ppos)
-{
-	struct video_device *dev = file->private_data;
-	unsigned long int realcount = count;
-	int ret = 0;
-	struct usb_stv *stv680 = video_get_drvdata(dev);
-	unsigned long int i;
-
-	if (STV680_NUMFRAMES != 2) {
-		PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!");
-		return -1;
-	}
-	if (stv680->udev == NULL)
-		return -EIO;
-	if (realcount > (stv680->vwidth * stv680->vheight * 3))
-		realcount = stv680->vwidth * stv680->vheight * 3;
-
-	/* Shouldn't happen: */
-	if (stv680->frame[0].grabstate == FRAME_GRABBING) {
-		PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read");
-		return -EBUSY;
-	}
-	stv680->frame[0].grabstate = FRAME_READY;
-	stv680->frame[1].grabstate = FRAME_UNUSED;
-	stv680->curframe = 0;
-
-	if (!stv680->streaming)
-		stv680_start_stream (stv680);
-
-	if (!stv680->streaming) {
-		ret = stv680_newframe (stv680, 0);	/* ret should = 0 */
-	}
-
-	ret = stv680_newframe (stv680, 0);
-
-	if (!ret) {
-		if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) {
-			PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i);
-			return -EFAULT;
-		}
-	} else {
-		realcount = ret;
-	}
-	stv680->frame[0].grabstate = FRAME_UNUSED;
-	return realcount;
-}				/* stv680_read */
-
-static const struct v4l2_file_operations stv680_fops = {
-	.owner =	THIS_MODULE,
-	.open =		stv_open,
-	.release =     	stv_close,
-	.read =		stv680_read,
-	.mmap =		stv680_mmap,
-	.ioctl =        stv680_ioctl,
-};
-static struct video_device stv680_template = {
-	.name =		"STV0680 USB camera",
-	.fops =         &stv680_fops,
-	.release =	video_device_release,
-};
-
-static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_stv *stv680 = NULL;
-	char *camera_name = NULL;
-	int retval = 0;
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1) {
-		PDEBUG (0, "STV(e): Number of Configurations != 1");
-		return -ENODEV;
-	}
-
-	interface = &intf->altsetting[0];
-	/* Is it a STV680? */
-	if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) &&
-	    (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) {
-		camera_name = "STV0680";
-		PDEBUG (0, "STV(i): STV0680 camera found.");
-	} else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) &&
-		   (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) {
-		camera_name = "Creative WebCam Go Mini";
-		PDEBUG (0, "STV(i): Creative WebCam Go Mini found.");
-	} else {
-		PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values.");
-		PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer.");
-		retval = -ENODEV;
-		goto error;
-	}
-	/* We found one */
-	if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) {
-		PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct.");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	stv680->udev = dev;
-	stv680->camera_name = camera_name;
-
-	stv680->vdev = video_device_alloc();
-	if (!stv680->vdev) {
-		retval = -ENOMEM;
-		goto error;
-	}
-	memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template));
-	stv680->vdev->parent = &intf->dev;
-	video_set_drvdata(stv680->vdev, stv680);
-
-	memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
-	init_waitqueue_head (&stv680->wq);
-	mutex_init (&stv680->lock);
-	wmb ();
-
-	if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		PDEBUG (0, "STV(e): video_register_device failed");
-		retval = -EIO;
-		goto error_vdev;
-	}
-	PDEBUG(0, "STV(i): registered new video device: %s",
-		video_device_node_name(stv680->vdev));
-
-	usb_set_intfdata (intf, stv680);
-	retval = stv680_create_sysfs_files(stv680->vdev);
-	if (retval)
-		goto error_unreg;
-	return 0;
-
-error_unreg:
-	video_unregister_device(stv680->vdev);
-error_vdev:
-	video_device_release(stv680->vdev);
-error:
-	kfree(stv680);
-	return retval;
-}
-
-static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680)
-{
-	int i;
-
-	stv680->udev = NULL;
-	stv680->frame[0].grabstate = FRAME_ERROR;
-	stv680->frame[1].grabstate = FRAME_ERROR;
-	stv680->streaming = 0;
-
-	wake_up_interruptible (&stv680->wq);
-
-	for (i = 0; i < STV680_NUMSBUF; i++)
-		if (stv680->urb[i]) {
-			usb_kill_urb (stv680->urb[i]);
-			usb_free_urb (stv680->urb[i]);
-			stv680->urb[i] = NULL;
-			kfree(stv680->sbuf[i].data);
-		}
-	for (i = 0; i < STV680_NUMSCRATCH; i++)
-		kfree(stv680->scratch[i].data);
-	PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name);
-
-	/* Free the memory */
-	kfree(stv680);
-}
-
-static void stv680_disconnect (struct usb_interface *intf)
-{
-	struct usb_stv *stv680 = usb_get_intfdata (intf);
-
-	usb_set_intfdata (intf, NULL);
-
-	if (stv680) {
-		/* We don't want people trying to open up the device */
-		if (stv680->vdev) {
-			stv680_remove_sysfs_files(stv680->vdev);
-			video_unregister_device(stv680->vdev);
-			stv680->vdev = NULL;
-		}
-		if (!stv680->user) {
-			usb_stv680_remove_disconnected (stv680);
-		} else {
-			stv680->removed = 1;
-		}
-	}
-}
-
-static struct usb_driver stv680_driver = {
-	.name =		"stv680",
-	.probe =	stv680_probe,
-	.disconnect =	stv680_disconnect,
-	.id_table =	device_table
-};
-
-/********************************************************************
- *  Module routines
- ********************************************************************/
-
-static int __init usb_stv680_init (void)
-{
-	if (usb_register (&stv680_driver) < 0) {
-		PDEBUG (0, "STV(e): Could not setup STV0680 driver");
-		return -1;
-	}
-	PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION);
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-}
-
-static void __exit usb_stv680_exit (void)
-{
-	usb_deregister (&stv680_driver);
-	PDEBUG (0, "STV(i): driver deregistered");
-}
-
-module_init (usb_stv680_init);
-module_exit (usb_stv680_exit);
diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h
deleted file mode 100644
index a08f1b08a4b..00000000000
--- a/drivers/media/video/stv680.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/****************************************************************************
- *
- *  Filename: stv680.h
- *
- *  Description:
- *     This is a USB driver for STV0680 based usb video cameras.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- ****************************************************************************/
-
-/* size of usb transfers */
-#define STV680_PACKETSIZE	4096
-
-/* number of queued bulk transfers to use, may have problems if > 1 */
-#define STV680_NUMSBUF		1
-
-/* number of frames supported by the v4l part */
-#define STV680_NUMFRAMES	2
-
-/* scratch buffers for passing data to the decoders: 2 or 4 are good */
-#define STV680_NUMSCRATCH	2
-
-/* number of nul sized packets to receive before kicking the camera */
-#define STV680_MAX_NULLPACKETS	200
-
-/* number of decoding errors before kicking the camera */
-#define STV680_MAX_ERRORS	100
-
-#define USB_PENCAM_VENDOR_ID	0x0553
-#define USB_PENCAM_PRODUCT_ID	0x0202
-
-#define USB_CREATIVEGOMINI_VENDOR_ID	0x041e
-#define USB_CREATIVEGOMINI_PRODUCT_ID	0x4007
-
-#define PENCAM_TIMEOUT          1000
-/* fmt 4 */
-#define STV_VIDEO_PALETTE       VIDEO_PALETTE_RGB24
-
-static struct usb_device_id device_table[] = {
-	{USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)},
-	{USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)},
-	{}
-};
-MODULE_DEVICE_TABLE (usb, device_table);
-
-struct stv680_sbuf {
-	unsigned char *data;
-};
-
-enum {
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-	FRAME_READY,		/* Ready to start grabbing */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_ERROR,		/* Something bad happened while processing */
-};
-
-enum {
-	BUFFER_UNUSED,
-	BUFFER_READY,
-	BUFFER_BUSY,
-	BUFFER_DONE,
-};
-
-/* raw camera data <- sbuf (urb transfer buf) */
-struct stv680_scratch {
-	unsigned char *data;
-	volatile int state;
-	int offset;
-	int length;
-};
-
-/* processed data for display ends up here, after bayer */
-struct stv680_frame {
-	unsigned char *data;	/* Frame buffer */
-	volatile int grabstate;	/* State of grabbing */
-	unsigned char *curline;
-	int curlinepix;
-	int curpix;
-};
-
-/* this is almost the video structure uvd_t, with extra parameters for stv */
-struct usb_stv {
-	struct video_device *vdev;
-
-	struct usb_device *udev;
-
-	unsigned char bulk_in_endpointAddr;	/* __u8  the address of the bulk in endpoint */
-	char *camera_name;
-
-	unsigned int VideoMode;	/* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */
-	int SupportedModes;
-	int CIF;
-	int VGA;
-	int QVGA;
-	int cwidth;		/* camera width */
-	int cheight;		/* camera height */
-	int maxwidth;		/* max video width */
-	int maxheight;		/* max video height */
-	int vwidth;		/* current width for video window */
-	int vheight;		/* current height for video window */
-	unsigned long int rawbufsize;
-	unsigned long int maxframesize;	/* rawbufsize * 3 for RGB */
-
-	int origGain;
-	int origMode;		/* original camera mode */
-
-	struct mutex lock;	/* to lock the structure */
-	int user;		/* user count for exclusive use */
-	int removed;		/* device disconnected */
-	int streaming;		/* Are we streaming video? */
-	char *fbuf;		/* Videodev buffer area */
-	struct urb *urb[STV680_NUMSBUF];	/* # of queued bulk transfers */
-	int curframe;		/* Current receiving frame */
-	struct stv680_frame frame[STV680_NUMFRAMES];	/* # frames supported by v4l part */
-	int readcount;
-	int framecount;
-	int error;
-	int dropped;
-	int scratch_next;
-	int scratch_use;
-	int scratch_overflow;
-	struct stv680_scratch scratch[STV680_NUMSCRATCH];	/* for decoders */
-	struct stv680_sbuf sbuf[STV680_NUMSBUF];
-
-	unsigned int brightness;
-	unsigned int chgbright;
-	unsigned int whiteness;
-	unsigned int colour;
-	unsigned int contrast;
-	unsigned int hue;
-	unsigned int palette;
-	unsigned int depth;	/* rgb24 in bits */
-
-	wait_queue_head_t wq;	/* Processes waiting */
-
-	int nullpackets;
-};
-
-
-static const unsigned char red[256] = {
-	0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18,
-	18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42,
-	44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69,
-	71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87,
-	88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101,
-	102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,
-	114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124,
-	125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134,
-	134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143,
-	143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151,
-	152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159,
-	159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166,
-	167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173,
-	173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179,
-	180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186,
-	187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192,
-	192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197,
-	198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204,
-	204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209,
-	209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215,
-	215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219,
-	220, 220, 221, 221
-};
-
-static const unsigned char green[256] = {
-	0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
-	21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47,
-	50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77,
-	79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97,
-	98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113,
-	114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126,
-	127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138,
-	139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149,
-	150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159,
-	160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168,
-	169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177,
-	177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185,
-	186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193,
-	193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200,
-	201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207,
-	208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214,
-	214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220,
-	221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
-	227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233,
-	233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
-	239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244,
-	245, 245, 246, 246
-};
-
-static const unsigned char blue[256] = {
-	0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
-	23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51,
-	55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84,
-	86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106,
-	107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124,
-	125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138,
-	139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151,
-	152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163,
-	165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174,
-	176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184,
-	185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194,
-	194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203,
-	204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212,
-	212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220,
-	221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
-	228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235,
-	235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242,
-	243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249,
-	249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255
-};
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b90e9da3167..54681a53582 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -850,7 +850,6 @@ static int tcm825x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct tcm825x_sensor *sensor = &tcm825x;
-	int rval;
 
 	if (i2c_get_clientdata(client))
 		return -EBUSY;
@@ -871,11 +870,7 @@ static int tcm825x_probe(struct i2c_client *client,
 	sensor->pix.height = tcm825x_sizes[QVGA].height;
 	sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565;
 
-	rval = v4l2_int_device_register(sensor->v4l2_int_device);
-	if (rval)
-		i2c_set_clientdata(client, NULL);
-
-	return rval;
+	return v4l2_int_device_register(sensor->v4l2_int_device);
 }
 
 static int tcm825x_remove(struct i2c_client *client)
@@ -886,7 +881,6 @@ static int tcm825x_remove(struct i2c_client *client)
 		return -ENODEV;	/* our client isn't attached */
 
 	v4l2_int_device_unregister(sensor->v4l2_int_device);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index 256cc558ba1..4555f4a5f4c 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -227,12 +227,11 @@ static int firmware_download(struct usb_device *udev)
 
 	fwlength = fw->size;
 
-	fwbuf = kzalloc(fwlength, GFP_KERNEL);
+	fwbuf = kmemdup(fw->data, fwlength, GFP_KERNEL);
 	if (!fwbuf) {
 		ret = -ENOMEM;
 		goto out;
 	}
-	memcpy(fwbuf, fw->data, fwlength);
 
 	max_packet_size = udev->ep_out[0x1]->desc.wMaxPacketSize;
 	log("\t\t download size : %d", (int)max_packet_size);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 0a877497b93..07fabdd9b46 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -267,6 +267,21 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,                 "Xceive XC4000"},
 	{ TUNER_ABSENT,                 "Dibcom 7070"},
 	{ TUNER_PHILIPS_TDA8290,        "NXP 18271C2"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	/* 160-169 */
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_PHILIPS_FQ1236_MK5,	"TCL M30WTP-4N-E"},
+	{ TUNER_ABSENT,			"unknown"},
 };
 
 /* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index e826114b7fb..71c73fa0d68 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -88,9 +88,6 @@ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
  * @pdata: Board specific
  * @ver: Chip version
  * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
- * @pix: Current pixel format
- * @num_fmts: Number of formats
- * @fmt_list: Format list
  * @current_std: Current standard
  * @num_stds: Number of standards
  * @std_list: Standards list
@@ -105,13 +102,9 @@ struct tvp514x_decoder {
 	int ver;
 	int streaming;
 
-	struct v4l2_pix_format pix;
-	int num_fmts;
-	const struct v4l2_fmtdesc *fmt_list;
-
 	enum tvp514x_std current_std;
 	int num_stds;
-	struct tvp514x_std_info *std_list;
+	const struct tvp514x_std_info *std_list;
 	/* Input and Output Routing parameters */
 	u32 input;
 	u32 output;
@@ -203,27 +196,12 @@ static struct tvp514x_reg tvp514x_reg_list_default[] = {
 };
 
 /**
- * List of image formats supported by TVP5146/47 decoder
- * Currently we are using 8 bit mode only, but can be
- * extended to 10/20 bit mode.
- */
-static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
-	{
-	 .index = 0,
-	 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-	 .flags = 0,
-	 .description = "8-bit UYVY 4:2:2 Format",
-	 .pixelformat = V4L2_PIX_FMT_UYVY,
-	},
-};
-
-/**
  * Supported standards -
  *
  * Currently supports two standards only, need to add support for rest of the
  * modes, like SECAM, etc...
  */
-static struct tvp514x_std_info tvp514x_std_list[] = {
+static const struct tvp514x_std_info tvp514x_std_list[] = {
 	/* Standard: STD_NTSC_MJ */
 	[STD_NTSC_MJ] = {
 	 .width = NTSC_NUM_ACTIVE_PIXELS,
@@ -366,13 +344,13 @@ static int tvp514x_write_regs(struct v4l2_subdev *sd,
 }
 
 /**
- * tvp514x_get_current_std() : Get the current standard detected by TVP5146/47
+ * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
  * @sd: ptr to v4l2_subdev struct
  *
- * Get current standard detected by TVP5146/47, STD_INVALID if there is no
+ * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
  * standard detected.
  */
-static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
+static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
 {
 	u8 std, std_status;
 
@@ -518,7 +496,7 @@ static int tvp514x_detect(struct v4l2_subdev *sd,
  * @std_id: standard V4L2 std_id ioctl enum
  *
  * Returns the current standard detected by TVP5146/47. If no active input is
- * detected, returns -EINVAL
+ * detected then *std_id is set to 0 and the function returns 0.
  */
 static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 {
@@ -530,10 +508,12 @@ static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 	if (std_id == NULL)
 		return -EINVAL;
 
-	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
+	*std_id = V4L2_STD_UNKNOWN;
+
+	/* query the current standard */
+	current_std = tvp514x_query_current_std(sd);
 	if (current_std == STD_INVALID)
-		return -EINVAL;
+		return 0;
 
 	input_sel = decoder->input;
 
@@ -575,12 +555,11 @@ static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 	/* check whether signal is locked */
 	sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
 	if (lock_mask != (sync_lock_status & lock_mask))
-		return -EINVAL;	/* No input detected */
+		return 0;	/* No input detected */
 
-	decoder->current_std = current_std;
 	*std_id = decoder->std_list[current_std].standard.id;
 
-	v4l2_dbg(1, debug, sd, "Current STD: %s",
+	v4l2_dbg(1, debug, sd, "Current STD: %s\n",
 			decoder->std_list[current_std].standard.name);
 	return 0;
 }
@@ -614,7 +593,7 @@ static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
 	decoder->tvp514x_regs[REG_VIDEO_STD].val =
 		decoder->std_list[i].video_std;
 
-	v4l2_dbg(1, debug, sd, "Standard set to: %s",
+	v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
 			decoder->std_list[i].standard.name);
 	return 0;
 }
@@ -637,7 +616,6 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 	int err;
 	enum tvp514x_input input_sel;
 	enum tvp514x_output output_sel;
-	enum tvp514x_std current_std = STD_INVALID;
 	u8 sync_lock_status, lock_mask;
 	int try_count = LOCK_RETRY_COUNT;
 
@@ -721,11 +699,6 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 		/* Allow decoder to sync up with new input */
 		msleep(LOCK_RETRY_DELAY);
 
-		/* get the current standard for future reference */
-		current_std = tvp514x_get_current_std(sd);
-		if (current_std == STD_INVALID)
-			continue;
-
 		sync_lock_status = tvp514x_read_reg(sd,
 				REG_STATUS1);
 		if (lock_mask == (sync_lock_status & lock_mask))
@@ -733,15 +706,13 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 			break;
 	}
 
-	if ((current_std == STD_INVALID) || (try_count < 0))
+	if (try_count < 0)
 		return -EINVAL;
 
-	decoder->current_std = current_std;
 	decoder->input = input;
 	decoder->output = output;
 
-	v4l2_dbg(1, debug, sd, "Input set to: %d, std : %d",
-			input_sel, current_std);
+	v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
 
 	return 0;
 }
@@ -794,7 +765,7 @@ tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
 		return err;
 	}
 
-	v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d",
+	v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d\n",
 			qctrl->name, qctrl->minimum, qctrl->maximum,
 			qctrl->default_value);
 
@@ -851,7 +822,7 @@ tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		return -EINVAL;
 	}
 
-	v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d\n",
 			ctrl->id, ctrl->value);
 	return 0;
 }
@@ -951,7 +922,7 @@ tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		return err;
 	}
 
-	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
 			ctrl->id, ctrl->value);
 
 	return err;
@@ -967,44 +938,33 @@ tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int
 tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
 {
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int index;
-
-	if (fmt == NULL)
-		return -EINVAL;
-
-	index = fmt->index;
-	if ((index >= decoder->num_fmts) || (index < 0))
-		/* Index out of bound */
+	if (fmt == NULL || fmt->index)
 		return -EINVAL;
 
 	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		/* only capture is supported */
 		return -EINVAL;
 
-	memcpy(fmt, &decoder->fmt_list[index],
-		sizeof(struct v4l2_fmtdesc));
-
-	v4l2_dbg(1, debug, sd, "Current FMT: index - %d (%s)",
-			decoder->fmt_list[index].index,
-			decoder->fmt_list[index].description);
+	/* only one format */
+	fmt->flags = 0;
+	strlcpy(fmt->description, "8-bit UYVY 4:2:2 Format",
+					sizeof(fmt->description));
+	fmt->pixelformat = V4L2_PIX_FMT_UYVY;
 	return 0;
 }
 
 /**
- * tvp514x_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
+ * tvp514x_fmt_cap() - V4L2 decoder interface handler for try/s/g_fmt
  * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
  *
- * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
- * ioctl is used to negotiate the image capture size and pixel format
- * without actually making it take effect.
+ * Implement the VIDIOC_TRY/S/G_FMT ioctl for the CAPTURE buffer type. This
+ * ioctl is used to negotiate the image capture size and pixel format.
  */
 static int
-tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
+tvp514x_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int ifmt;
 	struct v4l2_pix_format *pix;
 	enum tvp514x_std current_std;
 
@@ -1012,106 +972,30 @@ tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 		return -EINVAL;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		return -EINVAL;
 
 	pix = &f->fmt.pix;
 
 	/* Calculate height and width based on current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
+	current_std = decoder->current_std;
 
-	decoder->current_std = current_std;
+	pix->pixelformat = V4L2_PIX_FMT_UYVY;
 	pix->width = decoder->std_list[current_std].width;
 	pix->height = decoder->std_list[current_std].height;
-
-	for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
-		if (pix->pixelformat ==
-			decoder->fmt_list[ifmt].pixelformat)
-			break;
-	}
-	if (ifmt == decoder->num_fmts)
-		/* None of the format matched, select default */
-		ifmt = 0;
-	pix->pixelformat = decoder->fmt_list[ifmt].pixelformat;
-
 	pix->field = V4L2_FIELD_INTERLACED;
 	pix->bytesperline = pix->width * 2;
 	pix->sizeimage = pix->bytesperline * pix->height;
 	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	pix->priv = 0;
 
-	v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
-			"Width - %d, Height - %d",
-			decoder->fmt_list[ifmt].description, pix->bytesperline,
+	v4l2_dbg(1, debug, sd, "FMT: bytesperline - %d"
+			"Width - %d, Height - %d\n",
+			pix->bytesperline,
 			pix->width, pix->height);
 	return 0;
 }
 
 /**
- * tvp514x_s_fmt_cap() - V4L2 decoder interface handler for s_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
- *
- * If the requested format is supported, configures the HW to use that
- * format, returns error code if format not supported or HW can't be
- * correctly configured.
- */
-static int
-tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	struct v4l2_pix_format *pix;
-	int rval;
-
-	if (f == NULL)
-		return -EINVAL;
-
-	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	pix = &f->fmt.pix;
-	rval = tvp514x_try_fmt_cap(sd, f);
-	if (rval)
-		return rval;
-
-		decoder->pix = *pix;
-
-	return rval;
-}
-
-/**
- * tvp514x_g_fmt_cap() - V4L2 decoder interface handler for tvp514x_g_fmt_cap
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 v4l2_format structure
- *
- * Returns the decoder's current pixel format in the v4l2_format
- * parameter.
- */
-static int
-tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-
-	if (f == NULL)
-		return -EINVAL;
-
-	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	f->fmt.pix = decoder->pix;
-
-	v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
-			"Width - %d, Height - %d",
-			decoder->pix.bytesperline,
-			decoder->pix.width, decoder->pix.height);
-	return 0;
-}
-
-/**
  * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
  * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
@@ -1132,15 +1016,8 @@ tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 		/* only capture is supported */
 		return -EINVAL;
 
-	memset(a, 0, sizeof(*a));
-	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
-
-	decoder->current_std = current_std;
+	current_std = decoder->current_std;
 
 	cparm = &a->parm.capture;
 	cparm->capability = V4L2_CAP_TIMEPERFRAME;
@@ -1175,11 +1052,7 @@ tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 	timeperframe = &a->parm.capture.timeperframe;
 
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
-
-	decoder->current_std = current_std;
+	current_std = decoder->current_std;
 
 	*timeperframe =
 	    decoder->std_list[current_std].standard.frameperiod;
@@ -1259,9 +1132,9 @@ static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
 	.s_routing = tvp514x_s_routing,
 	.querystd = tvp514x_querystd,
 	.enum_fmt = tvp514x_enum_fmt_cap,
-	.g_fmt = tvp514x_g_fmt_cap,
-	.try_fmt = tvp514x_try_fmt_cap,
-	.s_fmt = tvp514x_s_fmt_cap,
+	.g_fmt = tvp514x_fmt_cap,
+	.try_fmt = tvp514x_fmt_cap,
+	.s_fmt = tvp514x_fmt_cap,
 	.g_parm = tvp514x_g_parm,
 	.s_parm = tvp514x_s_parm,
 	.s_stream = tvp514x_s_stream,
@@ -1274,22 +1147,6 @@ static const struct v4l2_subdev_ops tvp514x_ops = {
 
 static struct tvp514x_decoder tvp514x_dev = {
 	.streaming = 0,
-
-	.fmt_list = tvp514x_fmt_list,
-	.num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
-
-	.pix = {
-		/* Default to NTSC 8-bit YUV 422 */
-		.width = NTSC_NUM_ACTIVE_PIXELS,
-		.height = NTSC_NUM_ACTIVE_LINES,
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-		.field = V4L2_FIELD_INTERLACED,
-		.bytesperline = NTSC_NUM_ACTIVE_PIXELS * 2,
-		.sizeimage =
-		NTSC_NUM_ACTIVE_PIXELS * 2 * NTSC_NUM_ACTIVE_LINES,
-		.colorspace = V4L2_COLORSPACE_SMPTE170M,
-		},
-
 	.current_std = STD_NTSC_MJ,
 	.std_list = tvp514x_std_list,
 	.num_stds = ARRAY_SIZE(tvp514x_std_list),
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 47f0582d50a..1654f65cca7 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -934,17 +934,6 @@ static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f
 	return 0;
 }
 
-static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		return tvp5150_s_sliced_fmt(sd, &fmt->fmt.sliced);
-
-	default:
-		return -EINVAL;
-	}
-}
-
 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
 {
 	int i, mask = 0;
@@ -960,13 +949,6 @@ static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f
 	return 0;
 }
 
-static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return tvp5150_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *chip)
 {
@@ -1054,8 +1036,6 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
 
 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
 	.s_routing = tvp5150_s_routing,
-	.g_fmt = tvp5150_g_fmt,
-	.s_fmt = tvp5150_s_fmt,
 };
 
 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 76be733eabf..a727962781a 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -768,7 +768,7 @@ static int tw9910_g_fmt(struct v4l2_subdev *sd,
 
 	mf->width	= priv->scale->width;
 	mf->height	= priv->scale->height;
-	mf->code	= V4L2_MBUS_FMT_YUYV8_2X8_BE;
+	mf->code	= V4L2_MBUS_FMT_UYVY8_2X8;
 	mf->colorspace	= V4L2_COLORSPACE_JPEG;
 	mf->field	= V4L2_FIELD_INTERLACED_BT;
 
@@ -797,7 +797,7 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd,
 	/*
 	 * check color format
 	 */
-	if (mf->code != V4L2_MBUS_FMT_YUYV8_2X8_BE)
+	if (mf->code != V4L2_MBUS_FMT_UYVY8_2X8)
 		return -EINVAL;
 
 	mf->colorspace = V4L2_COLORSPACE_JPEG;
@@ -824,7 +824,7 @@ static int tw9910_try_fmt(struct v4l2_subdev *sd,
 		return -EINVAL;
 	}
 
-	mf->code = V4L2_MBUS_FMT_YUYV8_2X8_BE;
+	mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
 	mf->colorspace = V4L2_COLORSPACE_JPEG;
 
 	/*
@@ -903,13 +903,13 @@ static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
 #endif
 };
 
-static int tw9910_enum_fmt(struct v4l2_subdev *sd, int index,
+static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
 		return -EINVAL;
 
-	*code = V4L2_MBUS_FMT_YUYV8_2X8_BE;
+	*code = V4L2_MBUS_FMT_UYVY8_2X8;
 	return 0;
 }
 
@@ -977,7 +977,6 @@ static int tw9910_probe(struct i2c_client *client,
 	ret = tw9910_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -990,7 +989,6 @@ static int tw9910_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index adb1c044ad7..d6e16959f78 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -37,17 +37,3 @@ config USB_KONICAWC
 	  To compile this driver as a module, choose M here: the
 	  module will be called konicawc.
 
-config USB_QUICKCAM_MESSENGER
-	tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED please use the gspca stv06xx module
-	  instead.
-
-	  Say Y or M here to enable support for the USB Logitech Quickcam
-	  Messenger webcam.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called quickcam_messenger.
-
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
index 4a1b144bee4..bb52eb8dc2f 100644
--- a/drivers/media/video/usbvideo/Makefile
+++ b/drivers/media/video/usbvideo/Makefile
@@ -2,4 +2,3 @@ obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
 obj-$(CONFIG_USB_IBMCAM)        += ibmcam.o ultracam.o
 obj-$(CONFIG_USB_KONICAWC)      += konicawc.o
 obj-$(CONFIG_USB_VICAM)         += vicam.o
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= quickcam_messenger.o
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
deleted file mode 100644
index fbd665fa197..00000000000
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * Driver for Logitech Quickcam Messenger usb video camera
- * Copyright (C) Jaya Kumar
- *
- * This work was sponsored by CIS(M) Sdn Bhd.
- * History:
- * 05/08/2006 - Jaya Kumar
- * I wrote this based on the konicawc by Simon Evans.
- * -
- * Full credit for reverse engineering and creating an initial
- * working linux driver for the VV6422 goes to the qce-ga project by
- * Tuukka Toivonen, Jochen Hoenicke, Peter McConnell,
- * Cristiano De Michele, Georg Acher, Jean-Frederic Clere as well as
- * others.
- * ---
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/usb/input.h>
-#include <linux/slab.h>
-
-#include "usbvideo.h"
-#include "quickcam_messenger.h"
-
-/*
- * Version Information
- */
-
-#ifdef CONFIG_USB_DEBUG
-static int debug;
-#define DEBUG(n, format, arg...) \
-	if (n <= debug) {	 \
-		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
-	}
-#else
-#define DEBUG(n, arg...)
-static const int debug;
-#endif
-
-#define DRIVER_VERSION "v0.01"
-#define DRIVER_DESC "Logitech Quickcam Messenger USB"
-
-#define USB_LOGITECH_VENDOR_ID	0x046D
-#define USB_QCM_PRODUCT_ID	0x08F0
-
-#define MAX_CAMERAS	1
-
-#define MAX_COLOUR	32768
-#define MAX_HUE		32768
-#define MAX_BRIGHTNESS	32768
-#define MAX_CONTRAST	32768
-#define MAX_WHITENESS	32768
-
-static int size = SIZE_320X240;
-static int colour = MAX_COLOUR;
-static int hue = MAX_HUE;
-static int brightness =	MAX_BRIGHTNESS;
-static int contrast =	MAX_CONTRAST;
-static int whiteness =	MAX_WHITENESS;
-
-static struct usbvideo *cams;
-
-static struct usb_device_id qcm_table [] = {
-	{ USB_DEVICE(USB_LOGITECH_VENDOR_ID, USB_QCM_PRODUCT_ID) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, qcm_table);
-
-#ifdef CONFIG_INPUT
-static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
-{
-	struct input_dev *input_dev;
-	int error;
-
-	usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
-	strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
-
-	cam->input = input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_warn(&dev->dev, "insufficient mem for cam input device\n");
-		return;
-	}
-
-	input_dev->name = "QCM button";
-	input_dev->phys = cam->input_physname;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->dev.parent = &dev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
-
-	error = input_register_device(cam->input);
-	if (error) {
-		dev_warn(&dev->dev,
-			 "Failed to register camera's input device, err: %d\n",
-			 error);
-		input_free_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void qcm_unregister_input(struct qcm *cam)
-{
-	if (cam->input) {
-		input_unregister_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void qcm_report_buttonstat(struct qcm *cam)
-{
-	if (cam->input) {
-		input_report_key(cam->input, KEY_CAMERA, cam->button_sts);
-		input_sync(cam->input);
-	}
-}
-
-static void qcm_int_irq(struct urb *urb)
-{
-	int ret;
-	struct uvd *uvd = urb->context;
-	struct qcm *cam;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-
-	if (!uvd->streaming)
-		return;
-
-	uvd->stats.urb_count++;
-
-	if (urb->status < 0)
-		uvd->stats.iso_err_count++;
-	else {
-		if (urb->actual_length > 0 ) {
-			cam = (struct qcm *) uvd->user_data;
-			if (cam->button_sts_buf == 0x88)
-				cam->button_sts = 0x0;
-			else if (cam->button_sts_buf == 0x80)
-				cam->button_sts = 0x1;
-			qcm_report_buttonstat(cam);
-		}
-	}
-
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ret < 0)
-		err("usb_submit_urb error (%d)", ret);
-}
-
-static int qcm_setup_input_int(struct qcm *cam, struct uvd *uvd)
-{
-	int errflag;
-	usb_fill_int_urb(cam->button_urb, uvd->dev,
-			usb_rcvintpipe(uvd->dev, uvd->video_endp + 1),
-			&cam->button_sts_buf,
-			1,
-			qcm_int_irq,
-			uvd, 16);
-
-	errflag = usb_submit_urb(cam->button_urb, GFP_KERNEL);
-	if (errflag)
-		err ("usb_submit_int ret %d", errflag);
-	return errflag;
-}
-
-static void qcm_stop_int_data(struct qcm *cam)
-{
-	usb_kill_urb(cam->button_urb);
-}
-
-static int qcm_alloc_int_urb(struct qcm *cam)
-{
-	cam->button_urb = usb_alloc_urb(0, GFP_KERNEL);
-
-	if (!cam->button_urb)
-		return -ENOMEM;
-
-	return 0;
-}
-
-static void qcm_free_int(struct qcm *cam)
-{
-	usb_free_urb(cam->button_urb);
-}
-#endif /* CONFIG_INPUT */
-
-static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val)
-{
-	int ret;
-
-	/* we'll wait up to 3 slices but no more */
-	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-		reg, 0, &val, 1, 3*HZ);
-	return ret;
-}
-
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
-{
-	int ret;
-
-	/* we'll wait up to 3 slices but no more */
-	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-		reg, 0, &val, 2, 3*HZ);
-	return ret;
-}
-
-static int qcm_stv_getw(struct usb_device *dev, unsigned short reg,
-							__le16 *val)
-{
-	int ret;
-
-	/* we'll wait up to 3 slices but no more */
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-		0x04, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
-		reg, 0, val, 2, 3*HZ);
-	return ret;
-}
-
-static int qcm_camera_on(struct uvd *uvd)
-{
-	int ret;
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x01));
-	return 0;
-}
-
-static int qcm_camera_off(struct uvd *uvd)
-{
-	int ret;
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00));
-	return 0;
-}
-
-static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b)
-{
-	unsigned int segment, valsat;
-	signed int   h = (signed int) hue;
-	unsigned int s = (sat - 32768) * 2;	/* rescale */
-	unsigned int v = val;
-	unsigned int p;
-
-	/*
-	the registers controlling gain are 8 bit of which
-	we affect only the last 4 bits with our gain.
-	we know that if saturation is 0, (unsaturated) then
-	we're grayscale (center axis of the colour cone) so
-	we set rgb=value. we use a formula obtained from
-	wikipedia to map the cone to the RGB plane. it's
-	as follows for the human value case of h=0..360,
-	s=0..1, v=0..1
-	h_i = h/60 % 6 , f = h/60 - h_i , p = v(1-s)
-	q = v(1 - f*s) , t = v(1 - (1-f)s)
-	h_i==0 => r=v , g=t, b=p
-	h_i==1 => r=q , g=v, b=p
-	h_i==2 => r=p , g=v, b=t
-	h_i==3 => r=p , g=q, b=v
-	h_i==4 => r=t , g=p, b=v
-	h_i==5 => r=v , g=p, b=q
-	the bottom side (the point) and the stuff just up
-	of that is black so we simplify those two cases.
-	*/
-	if (sat < 32768) {
-		/* anything less than this is unsaturated */
-		*r = val;
-		*g = val;
-		*b = val;
-		return;
-	}
-	if (val <= (0xFFFF/8)) {
-		/* anything less than this is black */
-		*r = 0;
-		*g = 0;
-		*b = 0;
-		return;
-	}
-
-	/* the rest of this code is copying tukkat's
-	implementation of the hsv2rgb conversion as taken
-	from qc-usb-messenger code. the 10923 is 0xFFFF/6
-	to divide the cone into 6 sectors.  */
-
-	segment = (h + 10923) & 0xFFFF;
-	segment = segment*3 >> 16;		/* 0..2: 0=R, 1=G, 2=B */
-	hue -= segment * 21845;			/* -10923..10923 */
-	h = hue;
-	h *= 3;
-	valsat = v*s >> 16;			/* 0..65534 */
-	p = v - valsat;
-	if (h >= 0) {
-		unsigned int t = v - (valsat * (32769 - h) >> 15);
-		switch (segment) {
-		case 0:	/* R-> */
-			*r = v;
-			*g = t;
-			*b = p;
-			break;
-		case 1:	/* G-> */
-			*r = p;
-			*g = v;
-			*b = t;
-			break;
-		case 2:	/* B-> */
-			*r = t;
-			*g = p;
-			*b = v;
-			break;
-		}
-	} else {
-		unsigned int q = v - (valsat * (32769 + h) >> 15);
-		switch (segment) {
-		case 0:	/* ->R */
-			*r = v;
-			*g = p;
-			*b = q;
-			break;
-		case 1:	/* ->G */
-			*r = q;
-			*g = v;
-			*b = p;
-			break;
-		case 2:	/* ->B */
-			*r = p;
-			*g = q;
-			*b = v;
-			break;
-		}
-	}
-}
-
-static int qcm_sensor_set_gains(struct uvd *uvd, u16 hue,
-	u16 saturation, u16 value)
-{
-	int ret;
-	u16 r=0,g=0,b=0;
-
-	/* this code is based on qc-usb-messenger */
-	qcm_hsv2rgb(hue, saturation, value, &r, &g, &b);
-
-	r >>= 12;
-	g >>= 12;
-	b >>= 12;
-
-	/* min val is 8 */
-	r = max((u16) 8, r);
-	g = max((u16) 8, g);
-	b = max((u16) 8, b);
-
-	r |= 0x30;
-	g |= 0x30;
-	b |= 0x30;
-
-	/* set the r,g,b gain registers */
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x0509, r));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050A, g));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050B, b));
-
-	/* doing as qc-usb did */
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050C, 0x2A));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050D, 0x01));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
-
-	return 0;
-}
-
-static int qcm_sensor_set_exposure(struct uvd *uvd, int exposure)
-{
-	int ret;
-	int formedval;
-
-	/* calculation was from qc-usb-messenger driver */
-	formedval = ( exposure >> 12 );
-
-	/* max value for formedval is 14 */
-	formedval = min(formedval, 14);
-
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev,
-			0x143A, 0xF0 | formedval));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
-	return 0;
-}
-
-static int qcm_sensor_setlevels(struct uvd *uvd, int brightness, int contrast,
-					int hue, int colour)
-{
-	int ret;
-	/* brightness is exposure, contrast is gain, colour is saturation */
-	CHECK_RET(ret,
-		qcm_sensor_set_exposure(uvd, brightness));
-	CHECK_RET(ret, qcm_sensor_set_gains(uvd, hue, colour, contrast));
-
-	return 0;
-}
-
-static int qcm_sensor_setsize(struct uvd *uvd, u8 size)
-{
-	int ret;
-
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x1505, size));
-	return 0;
-}
-
-static int qcm_sensor_set_shutter(struct uvd *uvd, int whiteness)
-{
-	int ret;
-	/* some rescaling as done by the qc-usb-messenger code */
-	if (whiteness > 0xC000)
-		whiteness = 0xC000 + (whiteness & 0x3FFF)*8;
-
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143D,
-				(whiteness >> 8) & 0xFF));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143E,
-				(whiteness >> 16) & 0x03));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
-
-	return 0;
-}
-
-static int qcm_sensor_init(struct uvd *uvd)
-{
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-	int ret;
-	int i;
-
-	for (i=0; i < ARRAY_SIZE(regval_table) ; i++) {
-		CHECK_RET(ret, qcm_stv_setb(uvd->dev,
-					regval_table[i].reg,
-					regval_table[i].val));
-	}
-
-	CHECK_RET(ret, qcm_stv_setw(uvd->dev, 0x15c1,
-				cpu_to_le16(ISOC_PACKET_SIZE)));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x15c3, 0x08));
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143f, 0x01));
-
-	CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00));
-
-	CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
-
-	CHECK_RET(ret, qcm_sensor_setlevels(uvd, uvd->vpic.brightness,
-			uvd->vpic.contrast, uvd->vpic.hue, uvd->vpic.colour));
-
-	CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness));
-	CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
-
-	return 0;
-}
-
-static int qcm_set_camera_size(struct uvd *uvd)
-{
-	int ret;
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-
-	CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
-	cam->width = camera_sizes[cam->size].width;
-	cam->height = camera_sizes[cam->size].height;
-	uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-
-	return 0;
-}
-
-static int qcm_setup_on_open(struct uvd *uvd)
-{
-	int ret;
-
-	CHECK_RET(ret, qcm_sensor_set_gains(uvd, uvd->vpic.hue,
-				uvd->vpic.colour, uvd->vpic.contrast));
-	CHECK_RET(ret, qcm_sensor_set_exposure(uvd, uvd->vpic.brightness));
-	CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness));
-	CHECK_RET(ret, qcm_set_camera_size(uvd));
-	CHECK_RET(ret, qcm_camera_on(uvd));
-	return 0;
-}
-
-static void qcm_adjust_picture(struct uvd *uvd)
-{
-	int ret;
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-
-	ret = qcm_camera_off(uvd);
-	if (ret) {
-		err("can't turn camera off. abandoning pic adjustment");
-		return;
-	}
-
-	/* if there's been a change in contrast, hue, or
-	colour then we need to recalculate hsv in order
-	to update gains */
-	if ((cam->contrast != uvd->vpic.contrast) ||
-		(cam->hue != uvd->vpic.hue) ||
-		(cam->colour != uvd->vpic.colour)) {
-		cam->contrast = uvd->vpic.contrast;
-		cam->hue = uvd->vpic.hue;
-		cam->colour = uvd->vpic.colour;
-		ret = qcm_sensor_set_gains(uvd, cam->hue, cam->colour,
-						cam->contrast);
-		if (ret) {
-			err("can't set gains. abandoning pic adjustment");
-			return;
-		}
-	}
-
-	if (cam->brightness != uvd->vpic.brightness) {
-		cam->brightness = uvd->vpic.brightness;
-		ret = qcm_sensor_set_exposure(uvd, cam->brightness);
-		if (ret) {
-			err("can't set exposure. abandoning pic adjustment");
-			return;
-		}
-	}
-
-	if (cam->whiteness != uvd->vpic.whiteness) {
-		cam->whiteness = uvd->vpic.whiteness;
-		qcm_sensor_set_shutter(uvd, cam->whiteness);
-		if (ret) {
-			err("can't set shutter. abandoning pic adjustment");
-			return;
-		}
-	}
-
-	ret = qcm_camera_on(uvd);
-	if (ret) {
-		err("can't reenable camera. pic adjustment failed");
-		return;
-	}
-}
-
-static int qcm_process_frame(struct uvd *uvd, u8 *cdata, int framelen)
-{
-	int datalen;
-	int totaldata;
-	struct framehdr {
-		__be16 id;
-		__be16 len;
-	};
-	struct framehdr *fhdr;
-
-	totaldata = 0;
-	while (framelen) {
-		fhdr = (struct framehdr *) cdata;
-		datalen = be16_to_cpu(fhdr->len);
-		framelen -= 4;
-		cdata += 4;
-
-		if ((fhdr->id) == cpu_to_be16(0x8001)) {
-			RingQueue_Enqueue(&uvd->dp, marker, 4);
-			totaldata += 4;
-			continue;
-		}
-		if ((fhdr->id & cpu_to_be16(0xFF00)) == cpu_to_be16(0x0200)) {
-			RingQueue_Enqueue(&uvd->dp, cdata, datalen);
-			totaldata += datalen;
-		}
-		framelen -= datalen;
-		cdata += datalen;
-	}
-	return totaldata;
-}
-
-static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb)
-{
-	int totlen;
-	int i;
-	unsigned char *cdata;
-
-	totlen=0;
-	for (i = 0; i < dataurb->number_of_packets; i++) {
-		int n = dataurb->iso_frame_desc[i].actual_length;
-		int st = dataurb->iso_frame_desc[i].status;
-
-		cdata = dataurb->transfer_buffer +
-			dataurb->iso_frame_desc[i].offset;
-
-		if (st < 0) {
-			dev_warn(&uvd->dev->dev,
-				 "Data error: packet=%d. len=%d. status=%d.\n",
-				 i, n, st);
-			uvd->stats.iso_err_count++;
-			continue;
-		}
-		if (!n)
-			continue;
-
-		totlen += qcm_process_frame(uvd, cdata, n);
-	}
-	return totlen;
-}
-
-static void resubmit_urb(struct uvd *uvd, struct urb *urb)
-{
-	int ret;
-
-	urb->dev = uvd->dev;
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ret)
-		err("usb_submit_urb error (%d)", ret);
-}
-
-static void qcm_isoc_irq(struct urb *urb)
-{
-	int len;
-	struct uvd *uvd = urb->context;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-
-	if (!uvd->streaming)
-		return;
-
-	uvd->stats.urb_count++;
-
-	if (!urb->actual_length) {
-		resubmit_urb(uvd, urb);
-		return;
-	}
-
-	len = qcm_compress_iso(uvd, urb);
-	resubmit_urb(uvd, urb);
-	uvd->stats.urb_length = len;
-	uvd->stats.data_count += len;
-	if (len)
-		RingQueue_WakeUpInterruptible(&uvd->dp);
-}
-
-static int qcm_start_data(struct uvd *uvd)
-{
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-	int i;
-	int errflag;
-	int pktsz;
-	int err;
-
-	pktsz = uvd->iso_packet_len;
-	if (!CAMERA_IS_OPERATIONAL(uvd)) {
-		err("Camera is not operational");
-		return -EFAULT;
-	}
-
-	err = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltActive);
-	if (err < 0) {
-		err("usb_set_interface error");
-		uvd->last_error = err;
-		return -EBUSY;
-	}
-
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		int j, k;
-		struct urb *urb = uvd->sbuf[i].urb;
-		urb->dev = uvd->dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(uvd->dev, uvd->video_endp);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = uvd->sbuf[i].data;
-		urb->complete = qcm_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC;
-		for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) {
-			urb->iso_frame_desc[j].offset = k;
-			urb->iso_frame_desc[j].length = pktsz;
-		}
-	}
-
-	uvd->streaming = 1;
-	uvd->curframe = -1;
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		errflag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
-		if (errflag)
-			err ("usb_submit_isoc(%d) ret %d", i, errflag);
-	}
-
-	CHECK_RET(err, qcm_setup_input_int(cam, uvd));
-	CHECK_RET(err, qcm_camera_on(uvd));
-	return 0;
-}
-
-static void qcm_stop_data(struct uvd *uvd)
-{
-	struct qcm *cam;
-	int i, j;
-	int ret;
-
-	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
-		return;
-	cam = (struct qcm *) uvd->user_data;
-
-	ret = qcm_camera_off(uvd);
-	if (ret)
-		dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n");
-
-	uvd->streaming = 0;
-
-	/* Unschedule all of the iso td's */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++)
-		usb_kill_urb(uvd->sbuf[i].urb);
-
-	qcm_stop_int_data(cam);
-
-	if (!uvd->remove_pending) {
-		/* Set packet size to 0 */
-		j = usb_set_interface(uvd->dev, uvd->iface,
-					uvd->ifaceAltInactive);
-		if (j < 0) {
-			err("usb_set_interface() error %d.", j);
-			uvd->last_error = j;
-		}
-	}
-}
-
-static void qcm_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-	int x;
-	struct rgb *rgbL0;
-	struct rgb *rgbL1;
-	struct bayL0 *bayL0;
-	struct bayL1 *bayL1;
-	int hor,ver,hordel,verdel;
-	assert(frame != NULL);
-
-	switch (cam->size) {
-	case SIZE_160X120:
-		hor = 162; ver = 124; hordel = 1; verdel = 2;
-		break;
-	case SIZE_320X240:
-	default:
-		hor = 324; ver = 248; hordel = 2; verdel = 4;
-		break;
-	}
-
-	if (frame->scanstate == ScanState_Scanning) {
-		while (RingQueue_GetLength(&uvd->dp) >=
-			 4 + (hor*verdel + hordel)) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 3) == 0xff)) {
-				frame->curline = 0;
-				frame->scanstate = ScanState_Lines;
-				frame->frameState = FrameState_Grabbing;
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4);
-			/*
-			* if we're starting, we need to discard the first
-			* 4 lines of y bayer data
-			* and the first 2 gr elements of x bayer data
-			*/
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp,
-							(hor*verdel + hordel));
-				break;
-			}
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-	}
-
-	if (frame->scanstate == ScanState_Scanning)
-		return;
-
-	/* now we can start processing bayer data so long as we have at least
-	* 2 lines worth of data. this is the simplest demosaicing method that
-	* I could think of. I use each 2x2 bayer element without interpolation
-	* to generate 4 rgb pixels.
-	*/
-	while ( frame->curline < cam->height &&
-		(RingQueue_GetLength(&uvd->dp) >= hor*2)) {
-		/* get 2 lines of bayer for demosaicing
-		 * into 2 lines of RGB */
-		RingQueue_Dequeue(&uvd->dp, cam->scratch, hor*2);
-		bayL0 = (struct bayL0 *) cam->scratch;
-		bayL1 = (struct bayL1 *) (cam->scratch + hor);
-		/* frame->curline is the rgb y line */
-		rgbL0 = (struct rgb *)
-				( frame->data + (cam->width*3*frame->curline));
-		/* w/2 because we're already doing 2 pixels */
-		rgbL1 = rgbL0 + (cam->width/2);
-
-		for (x=0; x < cam->width; x+=2) {
-			rgbL0->r = bayL0->r;
-			rgbL0->g = bayL0->g;
-			rgbL0->b = bayL1->b;
-
-			rgbL0->r2 = bayL0->r;
-			rgbL0->g2 = bayL1->g;
-			rgbL0->b2 = bayL1->b;
-
-			rgbL1->r = bayL0->r;
-			rgbL1->g = bayL1->g;
-			rgbL1->b = bayL1->b;
-
-			rgbL1->r2 = bayL0->r;
-			rgbL1->g2 = bayL1->g;
-			rgbL1->b2 = bayL1->b;
-
-			rgbL0++;
-			rgbL1++;
-
-			bayL0++;
-			bayL1++;
-		}
-
-		frame->seqRead_Length += cam->width*3*2;
-		frame->curline += 2;
-	}
-	/* See if we filled the frame */
-	if (frame->curline == cam->height) {
-		frame->frameState = FrameState_Done_Hold;
-		frame->curline = 0;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-/* taken from konicawc */
-static int qcm_set_video_mode(struct uvd *uvd, struct video_window *vw)
-{
-	int ret;
-	int newsize;
-	int oldsize;
-	int x = vw->width;
-	int y = vw->height;
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-
-	if (x > 0 && y > 0) {
-		DEBUG(2, "trying to find size %d,%d", x, y);
-		for (newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) {
-			if ((camera_sizes[newsize].width == x) &&
-				(camera_sizes[newsize].height == y))
-				break;
-		}
-	} else
-		newsize = cam->size;
-
-	if (newsize > MAX_FRAME_SIZE) {
-		DEBUG(1, "couldn't find size %d,%d", x, y);
-		return -EINVAL;
-	}
-
-	if (newsize == cam->size) {
-		DEBUG(1, "Nothing to do");
-		return 0;
-	}
-
-	qcm_stop_data(uvd);
-
-	if (cam->size != newsize) {
-		oldsize = cam->size;
-		cam->size = newsize;
-		ret = qcm_set_camera_size(uvd);
-		if (ret) {
-			err("Couldn't set camera size, err=%d",ret);
-			/* restore the original size */
-			cam->size = oldsize;
-			return ret;
-		}
-	}
-
-	/* Flush the input queue and clear any current frame in progress */
-
-	RingQueue_Flush(&uvd->dp);
-	if (uvd->curframe != -1) {
-		uvd->frame[uvd->curframe].curline = 0;
-		uvd->frame[uvd->curframe].seqRead_Length = 0;
-		uvd->frame[uvd->curframe].seqRead_Index = 0;
-	}
-
-	CHECK_RET(ret, qcm_start_data(uvd));
-	return 0;
-}
-
-static int qcm_configure_video(struct uvd *uvd)
-{
-	int ret;
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	uvd->vpic.colour = colour;
-	uvd->vpic.hue = hue;
-	uvd->vpic.brightness = brightness;
-	uvd->vpic.contrast = contrast;
-	uvd->vpic.whiteness = whiteness;
-	uvd->vpic.depth = 24;
-	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "QCM USB Camera");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-
-	uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width;
-	uvd->vcap.minheight = camera_sizes[SIZE_160X120].height;
-	uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width;
-	uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0 ;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-
-	CHECK_RET(ret, qcm_sensor_init(uvd));
-	return 0;
-}
-
-static int qcm_probe(struct usb_interface *intf,
-			const struct usb_device_id *devid)
-{
-	int err;
-	struct uvd *uvd;
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct qcm *cam;
-	size_t buffer_size;
-	unsigned char video_ep;
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	int i,j;
-	unsigned int ifacenum, ifacenum_inact=0;
-	__le16 sensor_id;
-
-	/* we don't support multiconfig cams */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	/* first check for the video interface and not
-	* the audio interface */
-	interface = &intf->cur_altsetting[0];
-	if ((interface->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
-		|| (interface->desc.bInterfaceSubClass !=
-			USB_CLASS_VENDOR_SPEC))
-		return -ENODEV;
-
-	/*
-	walk through each endpoint in each setting in the interface
-	stop when we find the one that's an isochronous IN endpoint.
-	*/
-	for (i=0; i < intf->num_altsetting; i++) {
-		interface = &intf->cur_altsetting[i];
-		ifacenum = interface->desc.bAlternateSetting;
-		/* walk the end points */
-		for (j=0; j < interface->desc.bNumEndpoints; j++) {
-			endpoint = &interface->endpoint[j].desc;
-
-			if (usb_endpoint_dir_out(endpoint))
-				continue; /* not input then not good */
-
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
-			if (!buffer_size) {
-				ifacenum_inact = ifacenum;
-				continue; /* 0 pkt size is not what we want */
-			}
-
-			if (usb_endpoint_xfer_isoc(endpoint)) {
-				video_ep = endpoint->bEndpointAddress;
-				/* break out of the search */
-				goto good_videoep;
-			}
-		}
-	}
-	/* failed out since nothing useful was found */
-	err("No suitable endpoint was found\n");
-	return -ENODEV;
-
-good_videoep:
-	/* disable isochronous stream before doing anything else */
-	err = qcm_stv_setb(dev, STV_ISO_ENABLE, 0);
-	if (err < 0) {
-		err("Failed to disable sensor stream");
-		return -EIO;
-	}
-
-	/*
-	Check that this is the same unknown sensor that is known to work. This
-	sensor is suspected to be the ST VV6422C001. I'll check the same value
-	that the qc-usb driver checks. This value is probably not even the
-	sensor ID since it matches the USB dev ID. Oh well. If it doesn't
-	match, it's probably a diff sensor so exit and apologize.
-	*/
-	err = qcm_stv_getw(dev, CMOS_SENSOR_IDREV, &sensor_id);
-	if (err < 0) {
-		err("Couldn't read sensor values. Err %d\n",err);
-		return err;
-	}
-	if (sensor_id != cpu_to_le16(0x08F0)) {
-		err("Sensor ID %x != %x. Unsupported. Sorry\n",
-			le16_to_cpu(sensor_id), (0x08F0));
-		return -ENODEV;
-	}
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (!uvd)
-		return -ENOMEM;
-
-	cam = (struct qcm *) uvd->user_data;
-
-	/* buf for doing demosaicing */
-	cam->scratch = kmalloc(324*2, GFP_KERNEL);
-	if (!cam->scratch) /* uvd freed in dereg */
-		return -ENOMEM;
-
-	/* yes, if we fail after here, cam->scratch gets freed
-	by qcm_free_uvd */
-
-	err = qcm_alloc_int_urb(cam);
-	if (err < 0)
-		return err;
-
-	/* yes, if we fail after here, int urb gets freed
-	by qcm_free_uvd */
-
-	RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240);
-	cam->width = camera_sizes[size].width;
-	cam->height = camera_sizes[size].height;
-	cam->size = size;
-
-	uvd->debug = debug;
-	uvd->flags = 0;
-	uvd->dev = dev;
-	uvd->iface = intf->altsetting->desc.bInterfaceNumber;
-	uvd->ifaceAltActive = ifacenum;
-	uvd->ifaceAltInactive = ifacenum_inact;
-	uvd->video_endp = video_ep;
-	uvd->iso_packet_len = buffer_size;
-	uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
-	uvd->defaultPalette = VIDEO_PALETTE_RGB24;
-	uvd->canvas = VIDEOSIZE(320, 240);
-	uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-	err = qcm_configure_video(uvd);
-	if (err) {
-		err("failed to configure video settings");
-		return err;
-	}
-
-	err = usbvideo_RegisterVideoDevice(uvd);
-	if (err) { /* the uvd gets freed in Deregister */
-		err("usbvideo_RegisterVideoDevice() failed.");
-		return err;
-	}
-
-	uvd->max_frame_size = (320 * 240 * 3);
-	qcm_register_input(cam, dev);
-	usb_set_intfdata(intf, uvd);
-	return 0;
-}
-
-static void qcm_free_uvd(struct uvd *uvd)
-{
-	struct qcm *cam = (struct qcm *) uvd->user_data;
-
-	kfree(cam->scratch);
-	qcm_unregister_input(cam);
-	qcm_free_int(cam);
-}
-
-static struct usbvideo_cb qcm_driver = {
-	.probe = 		qcm_probe,
-	.setupOnOpen = 		qcm_setup_on_open,
-	.processData = 		qcm_process_isoc,
-	.setVideoMode = 	qcm_set_video_mode,
-	.startDataPump = 	qcm_start_data,
-	.stopDataPump = 	qcm_stop_data,
-	.adjustPicture = 	qcm_adjust_picture,
-	.userFree = 		qcm_free_uvd
-};
-
-static int __init qcm_init(void)
-{
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return usbvideo_register(
-		&cams,
-		MAX_CAMERAS,
-		sizeof(struct qcm),
-		"QCM",
-		&qcm_driver,
-		THIS_MODULE,
-		qcm_table);
-}
-
-static void __exit qcm_exit(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 320x240");
-module_param(colour, int, 0);
-MODULE_PARM_DESC(colour, "Initial colour");
-module_param(hue, int, 0);
-MODULE_PARM_DESC(hue, "Initial hue");
-module_param(brightness, int, 0);
-MODULE_PARM_DESC(brightness, "Initial brightness");
-module_param(contrast, int, 0);
-MODULE_PARM_DESC(contrast, "Initial contrast");
-module_param(whiteness, int, 0);
-MODULE_PARM_DESC(whiteness, "Initial whiteness");
-
-#ifdef CONFIG_USB_DEBUG
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-#endif
-
-module_init(qcm_init);
-module_exit(qcm_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_DESCRIPTION("QCM USB Camera");
-MODULE_SUPPORTED_DEVICE("QCM USB Camera");
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.h b/drivers/media/video/usbvideo/quickcam_messenger.h
deleted file mode 100644
index 17ace394d98..00000000000
--- a/drivers/media/video/usbvideo/quickcam_messenger.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef quickcam_messenger_h
-#define quickcam_messenger_h
-
-#ifndef CONFIG_INPUT
-/* if we're not using input we dummy out these functions */
-#define qcm_register_input(...)
-#define qcm_unregister_input(...)
-#define qcm_report_buttonstat(...)
-#define qcm_setup_input_int(...) 0
-#define qcm_stop_int_data(...)
-#define qcm_alloc_int_urb(...) 0
-#define qcm_free_int(...)
-#endif
-
-
-#define CHECK_RET(ret, expr) \
-	if ((ret = expr) < 0) return ret
-
-/* Control Registers for the STVV6422 ASIC
- * - this define is taken from the qc-usb-messenger code
- */
-#define STV_ISO_ENABLE		0x1440
-#define ISOC_PACKET_SIZE	1023
-
-/* Chip identification number including revision indicator */
-#define CMOS_SENSOR_IDREV	0xE00A
-
-struct rgb {
-	u8 b;
-	u8 g;
-	u8 r;
-	u8 b2;
-	u8 g2;
-	u8 r2;
-};
-
-struct bayL0 {
-	u8 g;
-	u8 r;
-};
-
-struct bayL1 {
-	u8 b;
-	u8 g;
-};
-
-struct cam_size {
-	u16	width;
-	u16	height;
-	u8	cmd;
-};
-
-static const struct cam_size camera_sizes[] = {
-	{ 160, 120, 0xf },
-	{ 320, 240, 0x2 },
-};
-
-enum frame_sizes {
-	SIZE_160X120	= 0,
-	SIZE_320X240	= 1,
-};
-
-#define MAX_FRAME_SIZE SIZE_320X240
-
-struct qcm {
-	u16 colour;
-	u16 hue;
-	u16 brightness;
-	u16 contrast;
-	u16 whiteness;
-
-	u8 size;
-	int height;
-	int width;
-	u8 *scratch;
-	struct urb *button_urb;
-	u8 button_sts;
-	u8 button_sts_buf;
-
-#ifdef CONFIG_INPUT
-	struct input_dev *input;
-	char input_physname[64];
-#endif
-};
-
-struct regval {
-	u16 reg;
-	u8 val;
-};
-/* this table is derived from the
-qc-usb-messenger code */
-static const struct regval regval_table[] = {
-	{ STV_ISO_ENABLE, 0x00 },
-	{ 0x1436, 0x00 }, { 0x1432, 0x03 },
-	{ 0x143a, 0xF9 }, { 0x0509, 0x38 },
-	{ 0x050a, 0x38 }, { 0x050b, 0x38 },
-	{ 0x050c, 0x2A }, { 0x050d, 0x01 },
-	{ 0x1431, 0x00 }, { 0x1433, 0x34 },
-	{ 0x1438, 0x18 }, { 0x1439, 0x00 },
-	{ 0x143b, 0x05 }, { 0x143c, 0x00 },
-	{ 0x143e, 0x01 }, { 0x143d, 0x00 },
-	{ 0x1442, 0xe2 }, { 0x1500, 0xd0 },
-	{ 0x1500, 0xd0 }, { 0x1500, 0x50 },
-	{ 0x1501, 0xaf }, { 0x1502, 0xc2 },
-	{ 0x1503, 0x45 }, { 0x1505, 0x02 },
-	{ 0x150e, 0x8e }, { 0x150f, 0x37 },
-	{ 0x15c0, 0x00 },
-};
-
-static const unsigned char marker[] = { 0x00, 0xff, 0x00, 0xFF };
-
-#endif /* quickcam_messenger_h */
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 6248a639ba2..c2690df3343 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1671,8 +1671,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 	PDEBUG(DBG_PROBE, "");
 
 	if (usbvision == NULL) {
-		dev_err(&usbvision->dev->dev,
-			"%s: usb_get_intfdata() failed\n", __func__);
+		pr_err("%s: usb_get_intfdata() failed\n", __func__);
 		return;
 	}
 
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index aa0720af07a..a350fad0db4 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -122,8 +122,8 @@ static struct uvc_control_info uvc_ctrls[] = {
 		.selector	= UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
 		.index		= 10,
 		.size		= 1,
-		.flags		= UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
-				| UVC_CONTROL_RESTORE,
+		.flags		= UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+				| UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
 	},
 	{
 		.entity		= UVC_GUID_UVC_PROCESSING,
@@ -606,6 +606,26 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = {
 		.set		= uvc_ctrl_set_zoom,
 	},
 	{
+		.id		= V4L2_CID_PAN_ABSOLUTE,
+		.name		= "Pan (Absolute)",
+		.entity		= UVC_GUID_UVC_CAMERA,
+		.selector	= UVC_CT_PANTILT_ABSOLUTE_CONTROL,
+		.size		= 32,
+		.offset		= 0,
+		.v4l2_type	= V4L2_CTRL_TYPE_INTEGER,
+		.data_type	= UVC_CTRL_DATA_TYPE_UNSIGNED,
+	},
+	{
+		.id		= V4L2_CID_TILT_ABSOLUTE,
+		.name		= "Tilt (Absolute)",
+		.entity		= UVC_GUID_UVC_CAMERA,
+		.selector	= UVC_CT_PANTILT_ABSOLUTE_CONTROL,
+		.size		= 32,
+		.offset		= 32,
+		.v4l2_type	= V4L2_CTRL_TYPE_INTEGER,
+		.data_type	= UVC_CTRL_DATA_TYPE_UNSIGNED,
+	},
+	{
 		.id		= V4L2_CID_PRIVACY,
 		.name		= "Privacy",
 		.entity		= UVC_GUID_UVC_CAMERA,
@@ -623,7 +643,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = {
 
 static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id)
 {
-	return ctrl->data + id * ctrl->info->size;
+	return ctrl->uvc_data + id * ctrl->info->size;
 }
 
 static inline int uvc_test_bit(const __u8 *data, int bit)
@@ -678,6 +698,14 @@ static void uvc_set_le_value(struct uvc_control_mapping *mapping,
 	int offset = mapping->offset;
 	__u8 mask;
 
+	/* According to the v4l2 spec, writing any value to a button control
+	 * should result in the action belonging to the button control being
+	 * triggered. UVC devices however want to see a 1 written -> override
+	 * value.
+	 */
+	if (mapping->v4l2_type == V4L2_CTRL_TYPE_BUTTON)
+		value = -1;
+
 	data += offset / 8;
 	offset &= 7;
 
@@ -1265,13 +1293,15 @@ int uvc_ctrl_resume_device(struct uvc_device *dev)
  * Control and mapping handling
  */
 
-static void uvc_ctrl_add_ctrl(struct uvc_device *dev,
+static int uvc_ctrl_add_ctrl(struct uvc_device *dev,
 	struct uvc_control_info *info)
 {
 	struct uvc_entity *entity;
 	struct uvc_control *ctrl = NULL;
-	int ret, found = 0;
+	int ret = 0, found = 0;
 	unsigned int i;
+	u8 *uvc_info;
+	u8 *uvc_data;
 
 	list_for_each_entry(entity, &dev->entities, list) {
 		if (!uvc_entity_match_guid(entity, info->entity))
@@ -1290,56 +1320,69 @@ static void uvc_ctrl_add_ctrl(struct uvc_device *dev,
 	}
 
 	if (!found)
-		return;
+		return 0;
+
+	uvc_data = kmalloc(info->size * UVC_CTRL_DATA_LAST + 1, GFP_KERNEL);
+	if (uvc_data == NULL)
+		return -ENOMEM;
+
+	uvc_info = uvc_data + info->size * UVC_CTRL_DATA_LAST;
 
 	if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT) {
 		/* Check if the device control information and length match
 		 * the user supplied information.
 		 */
-		__u32 flags;
-		__le16 size;
-		__u8 inf;
-
 		ret = uvc_query_ctrl(dev, UVC_GET_LEN, ctrl->entity->id,
-			dev->intfnum, info->selector, (__u8 *)&size, 2);
+				     dev->intfnum, info->selector, uvc_data, 2);
 		if (ret < 0) {
 			uvc_trace(UVC_TRACE_CONTROL,
 				"GET_LEN failed on control %pUl/%u (%d).\n",
 				info->entity, info->selector, ret);
-			return;
+			goto done;
 		}
 
-		if (info->size != le16_to_cpu(size)) {
+		if (info->size != le16_to_cpu(*(__le16 *)uvc_data)) {
 			uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u size "
 				"doesn't match user supplied value.\n",
 				info->entity, info->selector);
-			return;
+			ret = -EINVAL;
+			goto done;
 		}
 
 		ret = uvc_query_ctrl(dev, UVC_GET_INFO, ctrl->entity->id,
-			dev->intfnum, info->selector, &inf, 1);
+				     dev->intfnum, info->selector, uvc_info, 1);
 		if (ret < 0) {
 			uvc_trace(UVC_TRACE_CONTROL,
 				"GET_INFO failed on control %pUl/%u (%d).\n",
 				info->entity, info->selector, ret);
-			return;
+			goto done;
 		}
 
-		flags = info->flags;
-		if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) ||
-		    ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) {
+		if (((info->flags & UVC_CONTROL_GET_CUR) &&
+		    !(*uvc_info & UVC_CONTROL_CAP_GET)) ||
+		    ((info->flags & UVC_CONTROL_SET_CUR) &&
+		    !(*uvc_info & UVC_CONTROL_CAP_SET))) {
 			uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u flags "
 				"don't match supported operations.\n",
 				info->entity, info->selector);
-			return;
+			ret = -EINVAL;
+			goto done;
 		}
 	}
 
 	ctrl->info = info;
-	ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_DATA_LAST, GFP_KERNEL);
+	ctrl->uvc_data = uvc_data;
+	ctrl->uvc_info = uvc_info;
+
 	uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s "
 		"entity %u\n", ctrl->info->entity, ctrl->info->selector,
 		dev->udev->devpath, entity->id);
+
+done:
+	if (ret < 0)
+		kfree(uvc_data);
+
+	return ret;
 }
 
 /*
@@ -1572,12 +1615,34 @@ void uvc_ctrl_cleanup_device(struct uvc_device *dev)
 
 	list_for_each_entry(entity, &dev->entities, list) {
 		for (i = 0; i < entity->ncontrols; ++i)
-			kfree(entity->controls[i].data);
+			kfree(entity->controls[i].uvc_data);
 
 		kfree(entity->controls);
 	}
 }
 
+void uvc_ctrl_cleanup(void)
+{
+	struct uvc_control_info *info;
+	struct uvc_control_info *ni;
+	struct uvc_control_mapping *mapping;
+	struct uvc_control_mapping *nm;
+
+	list_for_each_entry_safe(info, ni, &uvc_driver.controls, list) {
+		if (!(info->flags & UVC_CONTROL_EXTENSION))
+			continue;
+
+		list_for_each_entry_safe(mapping, nm, &info->mappings, list) {
+			list_del(&mapping->list);
+			kfree(mapping->menu_info);
+			kfree(mapping);
+		}
+
+		list_del(&info->list);
+		kfree(info);
+	}
+}
+
 void uvc_ctrl_init(void)
 {
 	struct uvc_control_info *ctrl = uvc_ctrls;
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 838b56f097c..7eaf99b22a4 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -637,14 +637,13 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	}
 	streaming->header.bControlSize = n;
 
-	streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL);
+	streaming->header.bmaControls = kmemdup(&buffer[size], p * n,
+						GFP_KERNEL);
 	if (streaming->header.bmaControls == NULL) {
 		ret = -ENOMEM;
 		goto error;
 	}
 
-	memcpy(streaming->header.bmaControls, &buffer[size], p*n);
-
 	buflen -= buffer[0];
 	buffer += buffer[0];
 
@@ -2174,6 +2173,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_EXTRAFIELDS },
+	/* Manta MM-353 Plako */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x18ec,
+	  .idProduct		= 0x3188,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
 	/* FSC WebCam V30S */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -2261,6 +2269,7 @@ static int __init uvc_init(void)
 static void __exit uvc_cleanup(void)
 {
 	usb_deregister(&uvc_driver.driver);
+	uvc_ctrl_cleanup();
 }
 
 module_init(uvc_init);
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 7c9ab293349..86db32697b8 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -29,6 +29,71 @@
 #include "uvcvideo.h"
 
 /* ------------------------------------------------------------------------
+ * UVC ioctls
+ */
+static int uvc_ioctl_ctrl_map(struct uvc_xu_control_mapping *xmap, int old)
+{
+	struct uvc_control_mapping *map;
+	unsigned int size;
+	int ret;
+
+	map = kzalloc(sizeof *map, GFP_KERNEL);
+	if (map == NULL)
+		return -ENOMEM;
+
+	map->id = xmap->id;
+	memcpy(map->name, xmap->name, sizeof map->name);
+	memcpy(map->entity, xmap->entity, sizeof map->entity);
+	map->selector = xmap->selector;
+	map->size = xmap->size;
+	map->offset = xmap->offset;
+	map->v4l2_type = xmap->v4l2_type;
+	map->data_type = xmap->data_type;
+
+	switch (xmap->v4l2_type) {
+	case V4L2_CTRL_TYPE_INTEGER:
+	case V4L2_CTRL_TYPE_BOOLEAN:
+	case V4L2_CTRL_TYPE_BUTTON:
+		break;
+
+	case V4L2_CTRL_TYPE_MENU:
+		if (old) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		size = xmap->menu_count * sizeof(*map->menu_info);
+		map->menu_info = kmalloc(size, GFP_KERNEL);
+		if (map->menu_info == NULL) {
+			ret = -ENOMEM;
+			goto done;
+		}
+
+		if (copy_from_user(map->menu_info, xmap->menu_info, size)) {
+			ret = -EFAULT;
+			goto done;
+		}
+
+		map->menu_count = xmap->menu_count;
+		break;
+
+	default:
+		ret = -EINVAL;
+		goto done;
+	}
+
+	ret = uvc_ctrl_add_mapping(map);
+
+done:
+	if (ret < 0) {
+		kfree(map->menu_info);
+		kfree(map);
+	}
+
+	return ret;
+}
+
+/* ------------------------------------------------------------------------
  * V4L2 interface
  */
 
@@ -451,7 +516,7 @@ static int uvc_v4l2_open(struct file *file)
 
 static int uvc_v4l2_release(struct file *file)
 {
-	struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+	struct uvc_fh *handle = file->private_data;
 	struct uvc_streaming *stream = handle->stream;
 
 	uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n");
@@ -482,7 +547,7 @@ static int uvc_v4l2_release(struct file *file)
 static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 {
 	struct video_device *vdev = video_devdata(file);
-	struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+	struct uvc_fh *handle = file->private_data;
 	struct uvc_video_chain *chain = handle->chain;
 	struct uvc_streaming *stream = handle->stream;
 	long ret = 0;
@@ -963,6 +1028,9 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 
+		if (xinfo->size == 0)
+			return -EINVAL;
+
 		info = kzalloc(sizeof *info, GFP_KERNEL);
 		if (info == NULL)
 			return -ENOMEM;
@@ -974,7 +1042,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		info->flags = xinfo->flags;
 
 		info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX |
-				UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF;
+			       UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF |
+			       UVC_CONTROL_EXTENSION;
 
 		ret = uvc_ctrl_add_info(info);
 		if (ret < 0)
@@ -982,32 +1051,12 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		break;
 	}
 
+	case UVCIOC_CTRL_MAP_OLD:
 	case UVCIOC_CTRL_MAP:
-	{
-		struct uvc_xu_control_mapping *xmap = arg;
-		struct uvc_control_mapping *map;
-
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 
-		map = kzalloc(sizeof *map, GFP_KERNEL);
-		if (map == NULL)
-			return -ENOMEM;
-
-		map->id = xmap->id;
-		memcpy(map->name, xmap->name, sizeof map->name);
-		memcpy(map->entity, xmap->entity, sizeof map->entity);
-		map->selector = xmap->selector;
-		map->size = xmap->size;
-		map->offset = xmap->offset;
-		map->v4l2_type = xmap->v4l2_type;
-		map->data_type = xmap->data_type;
-
-		ret = uvc_ctrl_add_mapping(map);
-		if (ret < 0)
-			kfree(map);
-		break;
-	}
+		return uvc_ioctl_ctrl_map(arg, cmd == UVCIOC_CTRL_MAP_OLD);
 
 	case UVCIOC_CTRL_GET:
 		return uvc_xu_ctrl_query(chain, arg, 0);
@@ -1067,7 +1116,7 @@ static const struct vm_operations_struct uvc_vm_ops = {
 
 static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+	struct uvc_fh *handle = file->private_data;
 	struct uvc_streaming *stream = handle->stream;
 	struct uvc_video_queue *queue = &stream->queue;
 	struct uvc_buffer *uninitialized_var(buffer);
@@ -1122,7 +1171,7 @@ done:
 
 static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
 {
-	struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+	struct uvc_fh *handle = file->private_data;
 	struct uvc_streaming *stream = handle->stream;
 
 	uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n");
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index d1f88406a5e..ac272456fbf 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -27,6 +27,8 @@
 #define UVC_CONTROL_RESTORE	(1 << 6)
 /* Control can be updated by the camera. */
 #define UVC_CONTROL_AUTO_UPDATE	(1 << 7)
+/* Control is an extension unit control. */
+#define UVC_CONTROL_EXTENSION	(1 << 8)
 
 #define UVC_CONTROL_GET_RANGE	(UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \
 				 UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \
@@ -40,6 +42,15 @@ struct uvc_xu_control_info {
 	__u32 flags;
 };
 
+struct uvc_menu_info {
+	__u32 value;
+	__u8 name[32];
+};
+
+struct uvc_xu_control_mapping_old {
+	__u8 reserved[64];
+};
+
 struct uvc_xu_control_mapping {
 	__u32 id;
 	__u8 name[32];
@@ -50,6 +61,11 @@ struct uvc_xu_control_mapping {
 	__u8 offset;
 	enum v4l2_ctrl_type v4l2_type;
 	__u32 data_type;
+
+	struct uvc_menu_info __user *menu_info;
+	__u32 menu_count;
+
+	__u32 reserved[4];
 };
 
 struct uvc_xu_control {
@@ -60,6 +76,7 @@ struct uvc_xu_control {
 };
 
 #define UVCIOC_CTRL_ADD		_IOW('U', 1, struct uvc_xu_control_info)
+#define UVCIOC_CTRL_MAP_OLD	_IOWR('U', 2, struct uvc_xu_control_mapping_old)
 #define UVCIOC_CTRL_MAP		_IOWR('U', 2, struct uvc_xu_control_mapping)
 #define UVCIOC_CTRL_GET		_IOWR('U', 3, struct uvc_xu_control)
 #define UVCIOC_CTRL_SET		_IOW('U', 4, struct uvc_xu_control)
@@ -179,30 +196,6 @@ struct uvc_device;
 /* TODO: Put the most frequently accessed fields at the beginning of
  * structures to maximize cache efficiency.
  */
-struct uvc_streaming_control {
-	__u16 bmHint;
-	__u8  bFormatIndex;
-	__u8  bFrameIndex;
-	__u32 dwFrameInterval;
-	__u16 wKeyFrameRate;
-	__u16 wPFrameRate;
-	__u16 wCompQuality;
-	__u16 wCompWindowSize;
-	__u16 wDelay;
-	__u32 dwMaxVideoFrameSize;
-	__u32 dwMaxPayloadTransferSize;
-	__u32 dwClockFrequency;
-	__u8  bmFramingInfo;
-	__u8  bPreferedVersion;
-	__u8  bMinVersion;
-	__u8  bMaxVersion;
-};
-
-struct uvc_menu_info {
-	__u32 value;
-	__u8 name[32];
-};
-
 struct uvc_control_info {
 	struct list_head list;
 	struct list_head mappings;
@@ -250,7 +243,8 @@ struct uvc_control {
 	     modified : 1,
 	     cached : 1;
 
-	__u8 *data;
+	__u8 *uvc_data;
+	__u8 *uvc_info;
 };
 
 struct uvc_format_desc {
@@ -625,6 +619,7 @@ extern int uvc_ctrl_init_device(struct uvc_device *dev);
 extern void uvc_ctrl_cleanup_device(struct uvc_device *dev);
 extern int uvc_ctrl_resume_device(struct uvc_device *dev);
 extern void uvc_ctrl_init(void);
+extern void uvc_ctrl_cleanup(void);
 
 extern int uvc_ctrl_begin(struct uvc_video_chain *chain);
 extern int __uvc_ctrl_commit(struct uvc_video_chain *chain, int rollback);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 0ca7ec9ca90..9e89bf61779 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -410,7 +410,7 @@ static int __video_register_device(struct video_device *vdev, int type, int nr,
 	int minor_offset = 0;
 	int minor_cnt = VIDEO_NUM_DEVICES;
 	const char *name_base;
-	void *priv = video_get_drvdata(vdev);
+	void *priv = vdev->dev.p;
 
 	/* A minor value of -1 marks this video device as never
 	   having been registered */
@@ -536,9 +536,9 @@ static int __video_register_device(struct video_device *vdev, int type, int nr,
 
 	/* Part 4: register the device with sysfs */
 	memset(&vdev->dev, 0, sizeof(vdev->dev));
-	/* The memset above cleared the device's drvdata, so
+	/* The memset above cleared the device's device_private, so
 	   put back the copy we made earlier. */
-	video_set_drvdata(vdev, priv);
+	vdev->dev.p = priv;
 	vdev->dev.class = &video_class;
 	vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor);
 	if (vdev->parent)
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 7d3378437de..ce1595bef62 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -52,18 +52,18 @@ MODULE_LICENSE("GPL");
 #define CALL(q, f, arg...)						\
 	((q->int_ops->f) ? q->int_ops->f(arg) : 0)
 
-struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q)
+struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q)
 {
 	struct videobuf_buffer *vb;
 
 	BUG_ON(q->msize < sizeof(*vb));
 
-	if (!q->int_ops || !q->int_ops->alloc) {
+	if (!q->int_ops || !q->int_ops->alloc_vb) {
 		printk(KERN_ERR "No specific ops defined!\n");
 		BUG();
 	}
 
-	vb = q->int_ops->alloc(q->msize);
+	vb = q->int_ops->alloc_vb(q->msize);
 	if (NULL != vb) {
 		init_waitqueue_head(&vb->done);
 		vb->magic = MAGIC_BUFFER;
@@ -71,7 +71,7 @@ struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q)
 
 	return vb;
 }
-EXPORT_SYMBOL_GPL(videobuf_alloc);
+EXPORT_SYMBOL_GPL(videobuf_alloc_vb);
 
 #define WAITON_CONDITION (vb->state != VIDEOBUF_ACTIVE &&\
 				vb->state != VIDEOBUF_QUEUED)
@@ -195,6 +195,45 @@ int videobuf_queue_is_busy(struct videobuf_queue *q)
 }
 EXPORT_SYMBOL_GPL(videobuf_queue_is_busy);
 
+/**
+ * __videobuf_free() - free all the buffers and their control structures
+ *
+ * This function can only be called if streaming/reading is off, i.e. no buffers
+ * are under control of the driver.
+ */
+/* Locking: Caller holds q->vb_lock */
+static int __videobuf_free(struct videobuf_queue *q)
+{
+	int i;
+
+	dprintk(1, "%s\n", __func__);
+	if (!q)
+		return 0;
+
+	if (q->streaming || q->reading) {
+		dprintk(1, "Cannot free buffers when streaming or reading\n");
+		return -EBUSY;
+	}
+
+	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
+
+	for (i = 0; i < VIDEO_MAX_FRAME; i++)
+		if (q->bufs[i] && q->bufs[i]->map) {
+			dprintk(1, "Cannot free mmapped buffers\n");
+			return -EBUSY;
+		}
+
+	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+		if (NULL == q->bufs[i])
+			continue;
+		q->ops->buf_release(q, q->bufs[i]);
+		kfree(q->bufs[i]);
+		q->bufs[i] = NULL;
+	}
+
+	return 0;
+}
+
 /* Locking: Caller holds q->vb_lock */
 void videobuf_queue_cancel(struct videobuf_queue *q)
 {
@@ -308,36 +347,11 @@ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b,
 	b->sequence  = vb->field_count >> 1;
 }
 
-/* Locking: Caller holds q->vb_lock */
-static int __videobuf_mmap_free(struct videobuf_queue *q)
-{
-	int i;
-
-	if (!q)
-		return 0;
-
-	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
-
-	for (i = 0; i < VIDEO_MAX_FRAME; i++)
-		if (q->bufs[i] && q->bufs[i]->map)
-			return -EBUSY;
-
-	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
-		if (NULL == q->bufs[i])
-			continue;
-		q->ops->buf_release(q, q->bufs[i]);
-		kfree(q->bufs[i]);
-		q->bufs[i] = NULL;
-	}
-
-	return 0;
-}
-
 int videobuf_mmap_free(struct videobuf_queue *q)
 {
 	int ret;
 	mutex_lock(&q->vb_lock);
-	ret = __videobuf_mmap_free(q);
+	ret = __videobuf_free(q);
 	mutex_unlock(&q->vb_lock);
 	return ret;
 }
@@ -353,13 +367,13 @@ int __videobuf_mmap_setup(struct videobuf_queue *q,
 
 	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
 
-	err = __videobuf_mmap_free(q);
+	err = __videobuf_free(q);
 	if (0 != err)
 		return err;
 
 	/* Allocate and initialize buffers */
 	for (i = 0; i < bcount; i++) {
-		q->bufs[i] = videobuf_alloc(q);
+		q->bufs[i] = videobuf_alloc_vb(q);
 
 		if (NULL == q->bufs[i])
 			break;
@@ -766,7 +780,7 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q,
 	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
 
 	/* setup stuff */
-	q->read_buf = videobuf_alloc(q);
+	q->read_buf = videobuf_alloc_vb(q);
 	if (NULL == q->read_buf)
 		return -ENOMEM;
 
@@ -871,7 +885,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q,
 	if (NULL == q->read_buf) {
 		/* need to capture a new frame */
 		retval = -ENOMEM;
-		q->read_buf = videobuf_alloc(q);
+		q->read_buf = videobuf_alloc_vb(q);
 
 		dprintk(1, "video alloc=0x%p\n", q->read_buf);
 		if (NULL == q->read_buf)
@@ -970,7 +984,7 @@ static void __videobuf_read_stop(struct videobuf_queue *q)
 	int i;
 
 	videobuf_queue_cancel(q);
-	__videobuf_mmap_free(q);
+	__videobuf_free(q);
 	INIT_LIST_HEAD(&q->stream);
 	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
 		if (NULL == q->bufs[i])
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 74730c624cf..372b87efcd0 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -190,7 +190,7 @@ static int videobuf_dma_contig_user_get(struct videobuf_dma_contig_memory *mem,
 	return ret;
 }
 
-static struct videobuf_buffer *__videobuf_alloc(size_t size)
+static struct videobuf_buffer *__videobuf_alloc_vb(size_t size)
 {
 	struct videobuf_dma_contig_memory *mem;
 	struct videobuf_buffer *vb;
@@ -280,8 +280,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 		return -ENOMEM;
 
 	buf->map = map;
-	map->start = vma->vm_start;
-	map->end = vma->vm_end;
 	map->q = q;
 
 	buf->baddr = vma->vm_start;
@@ -338,7 +336,7 @@ error:
 static struct videobuf_qtype_ops qops = {
 	.magic        = MAGIC_QTYPE_OPS,
 
-	.alloc        = __videobuf_alloc,
+	.alloc_vb     = __videobuf_alloc_vb,
 	.iolock       = __videobuf_iolock,
 	.mmap_mapper  = __videobuf_mmap_mapper,
 	.vaddr        = __videobuf_to_vaddr,
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 8359e6badd3..06f9a9c2a39 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -57,7 +57,13 @@ MODULE_LICENSE("GPL");
 
 /* --------------------------------------------------------------------- */
 
-struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages)
+/*
+ * Return a scatterlist for some page-aligned vmalloc()'ed memory
+ * block (NULL on errors).  Memory for the scatterlist is allocated
+ * using kmalloc.  The caller must free the memory.
+ */
+static struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt,
+						  int nr_pages)
 {
 	struct scatterlist *sglist;
 	struct page *pg;
@@ -81,10 +87,14 @@ err:
 	vfree(sglist);
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(videobuf_vmalloc_to_sg);
 
-struct scatterlist *videobuf_pages_to_sg(struct page **pages, int nr_pages,
-					 int offset)
+/*
+ * Return a scatterlist for a an array of userpages (NULL on errors).
+ * Memory for the scatterlist is allocated using kmalloc.  The caller
+ * must free the memory.
+ */
+static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
+						int nr_pages, int offset)
 {
 	struct scatterlist *sglist;
 	int i;
@@ -201,17 +211,17 @@ int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
 	dprintk(1, "init kernel [%d pages]\n", nr_pages);
 
 	dma->direction = direction;
-	dma->vmalloc = vmalloc_32(nr_pages << PAGE_SHIFT);
-	if (NULL == dma->vmalloc) {
+	dma->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT);
+	if (NULL == dma->vaddr) {
 		dprintk(1, "vmalloc_32(%d pages) failed\n", nr_pages);
 		return -ENOMEM;
 	}
 
 	dprintk(1, "vmalloc is at addr 0x%08lx, size=%d\n",
-				(unsigned long)dma->vmalloc,
+				(unsigned long)dma->vaddr,
 				nr_pages << PAGE_SHIFT);
 
-	memset(dma->vmalloc, 0, nr_pages << PAGE_SHIFT);
+	memset(dma->vaddr, 0, nr_pages << PAGE_SHIFT);
 	dma->nr_pages = nr_pages;
 
 	return 0;
@@ -235,7 +245,7 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
 }
 EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay);
 
-int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma)
+int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma)
 {
 	MAGIC_CHECK(dma->magic, MAGIC_DMABUF);
 	BUG_ON(0 == dma->nr_pages);
@@ -244,8 +254,8 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma)
 		dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
 						   dma->offset);
 	}
-	if (dma->vmalloc) {
-		dma->sglist = videobuf_vmalloc_to_sg(dma->vmalloc,
+	if (dma->vaddr) {
+		dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
 						     dma->nr_pages);
 	}
 	if (dma->bus_addr) {
@@ -263,7 +273,7 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma)
 		return -ENOMEM;
 	}
 	if (!dma->bus_addr) {
-		dma->sglen = dma_map_sg(q->dev, dma->sglist,
+		dma->sglen = dma_map_sg(dev, dma->sglist,
 					dma->nr_pages, dma->direction);
 		if (0 == dma->sglen) {
 			printk(KERN_WARNING
@@ -279,14 +289,14 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma)
 }
 EXPORT_SYMBOL_GPL(videobuf_dma_map);
 
-int videobuf_dma_unmap(struct videobuf_queue *q, struct videobuf_dmabuf *dma)
+int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma)
 {
 	MAGIC_CHECK(dma->magic, MAGIC_DMABUF);
 
 	if (!dma->sglen)
 		return 0;
 
-	dma_unmap_sg(q->dev, dma->sglist, dma->sglen, dma->direction);
+	dma_unmap_sg(dev, dma->sglist, dma->sglen, dma->direction);
 
 	vfree(dma->sglist);
 	dma->sglist = NULL;
@@ -309,8 +319,8 @@ int videobuf_dma_free(struct videobuf_dmabuf *dma)
 		dma->pages = NULL;
 	}
 
-	vfree(dma->vmalloc);
-	dma->vmalloc = NULL;
+	vfree(dma->vaddr);
+	dma->vaddr = NULL;
 
 	if (dma->bus_addr)
 		dma->bus_addr = 0;
@@ -322,28 +332,6 @@ EXPORT_SYMBOL_GPL(videobuf_dma_free);
 
 /* --------------------------------------------------------------------- */
 
-int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma)
-{
-	struct videobuf_queue q;
-
-	q.dev = dev;
-
-	return videobuf_dma_map(&q, dma);
-}
-EXPORT_SYMBOL_GPL(videobuf_sg_dma_map);
-
-int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma)
-{
-	struct videobuf_queue q;
-
-	q.dev = dev;
-
-	return videobuf_dma_unmap(&q, dma);
-}
-EXPORT_SYMBOL_GPL(videobuf_sg_dma_unmap);
-
-/* --------------------------------------------------------------------- */
-
 static void videobuf_vm_open(struct vm_area_struct *vma)
 {
 	struct videobuf_mapping *map = vma->vm_private_data;
@@ -428,7 +416,7 @@ static const struct vm_operations_struct videobuf_vm_ops = {
 	struct videobuf_dma_sg_memory
  */
 
-static struct videobuf_buffer *__videobuf_alloc(size_t size)
+static struct videobuf_buffer *__videobuf_alloc_vb(size_t size)
 {
 	struct videobuf_dma_sg_memory *mem;
 	struct videobuf_buffer *vb;
@@ -456,7 +444,7 @@ static void *__videobuf_to_vaddr(struct videobuf_buffer *buf)
 
 	MAGIC_CHECK(mem->magic, MAGIC_SG_MEM);
 
-	return mem->dma.vmalloc;
+	return mem->dma.vaddr;
 }
 
 static int __videobuf_iolock(struct videobuf_queue *q,
@@ -520,7 +508,7 @@ static int __videobuf_iolock(struct videobuf_queue *q,
 	default:
 		BUG();
 	}
-	err = videobuf_dma_map(q, &mem->dma);
+	err = videobuf_dma_map(q->dev, &mem->dma);
 	if (0 != err)
 		return err;
 
@@ -620,8 +608,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 	}
 
 	map->count    = 1;
-	map->start    = vma->vm_start;
-	map->end      = vma->vm_end;
 	map->q        = q;
 	vma->vm_ops   = &videobuf_vm_ops;
 	vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
@@ -638,7 +624,7 @@ done:
 static struct videobuf_qtype_ops sg_ops = {
 	.magic        = MAGIC_QTYPE_OPS,
 
-	.alloc        = __videobuf_alloc,
+	.alloc_vb     = __videobuf_alloc_vb,
 	.iolock       = __videobuf_iolock,
 	.sync         = __videobuf_sync,
 	.mmap_mapper  = __videobuf_mmap_mapper,
@@ -654,7 +640,7 @@ void *videobuf_sg_alloc(size_t size)
 
 	q.msize = size;
 
-	return videobuf_alloc(&q);
+	return videobuf_alloc_vb(&q);
 }
 EXPORT_SYMBOL_GPL(videobuf_sg_alloc);
 
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index 583728f4c22..e7fe31d54f0 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -102,10 +102,10 @@ static void videobuf_vm_close(struct vm_area_struct *vma)
 				   called with IRQ's disabled
 				 */
 				dprintk(1, "%s: buf[%d] freeing (%p)\n",
-					__func__, i, mem->vmalloc);
+					__func__, i, mem->vaddr);
 
-				vfree(mem->vmalloc);
-				mem->vmalloc = NULL;
+				vfree(mem->vaddr);
+				mem->vaddr = NULL;
 			}
 
 			q->bufs[i]->map   = NULL;
@@ -135,7 +135,7 @@ static const struct vm_operations_struct videobuf_vm_ops = {
 	struct videobuf_dma_sg_memory
  */
 
-static struct videobuf_buffer *__videobuf_alloc(size_t size)
+static struct videobuf_buffer *__videobuf_alloc_vb(size_t size)
 {
 	struct videobuf_vmalloc_memory *mem;
 	struct videobuf_buffer *vb;
@@ -170,7 +170,7 @@ static int __videobuf_iolock(struct videobuf_queue *q,
 		dprintk(1, "%s memory method MMAP\n", __func__);
 
 		/* All handling should be done by __videobuf_mmap_mapper() */
-		if (!mem->vmalloc) {
+		if (!mem->vaddr) {
 			printk(KERN_ERR "memory is not alloced/mmapped.\n");
 			return -EINVAL;
 		}
@@ -189,13 +189,13 @@ static int __videobuf_iolock(struct videobuf_queue *q,
 		 * read() method.
 		 */
 
-		mem->vmalloc = vmalloc_user(pages);
-		if (!mem->vmalloc) {
+		mem->vaddr = vmalloc_user(pages);
+		if (!mem->vaddr) {
 			printk(KERN_ERR "vmalloc (%d pages) failed\n", pages);
 			return -ENOMEM;
 		}
 		dprintk(1, "vmalloc is at addr %p (%d pages)\n",
-			mem->vmalloc, pages);
+			mem->vaddr, pages);
 
 #if 0
 		int rc;
@@ -245,8 +245,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 		return -ENOMEM;
 
 	buf->map = map;
-	map->start = vma->vm_start;
-	map->end   = vma->vm_end;
 	map->q     = q;
 
 	buf->baddr = vma->vm_start;
@@ -256,18 +254,18 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 	MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM);
 
 	pages = PAGE_ALIGN(vma->vm_end - vma->vm_start);
-	mem->vmalloc = vmalloc_user(pages);
-	if (!mem->vmalloc) {
+	mem->vaddr = vmalloc_user(pages);
+	if (!mem->vaddr) {
 		printk(KERN_ERR "vmalloc (%d pages) failed\n", pages);
 		goto error;
 	}
-	dprintk(1, "vmalloc is at addr %p (%d pages)\n", mem->vmalloc, pages);
+	dprintk(1, "vmalloc is at addr %p (%d pages)\n", mem->vaddr, pages);
 
 	/* Try to remap memory */
-	retval = remap_vmalloc_range(vma, mem->vmalloc, 0);
+	retval = remap_vmalloc_range(vma, mem->vaddr, 0);
 	if (retval < 0) {
 		printk(KERN_ERR "mmap: remap failed with error %d. ", retval);
-		vfree(mem->vmalloc);
+		vfree(mem->vaddr);
 		goto error;
 	}
 
@@ -293,7 +291,7 @@ error:
 static struct videobuf_qtype_ops qops = {
 	.magic        = MAGIC_QTYPE_OPS,
 
-	.alloc        = __videobuf_alloc,
+	.alloc_vb     = __videobuf_alloc_vb,
 	.iolock       = __videobuf_iolock,
 	.mmap_mapper  = __videobuf_mmap_mapper,
 	.vaddr        = videobuf_to_vmalloc,
@@ -319,7 +317,7 @@ void *videobuf_to_vmalloc(struct videobuf_buffer *buf)
 	BUG_ON(!mem);
 	MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM);
 
-	return mem->vmalloc;
+	return mem->vaddr;
 }
 EXPORT_SYMBOL_GPL(videobuf_to_vmalloc);
 
@@ -341,8 +339,8 @@ void videobuf_vmalloc_free(struct videobuf_buffer *buf)
 
 	MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM);
 
-	vfree(mem->vmalloc);
-	mem->vmalloc = NULL;
+	vfree(mem->vaddr);
+	mem->vaddr = NULL;
 
 	return;
 }
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
deleted file mode 100644
index d807eea9175..00000000000
--- a/drivers/media/video/w9968cf.c
+++ /dev/null
@@ -1,3620 +0,0 @@
-/***************************************************************************
- * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip.       *
- *                                                                         *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * - Memory management code from bttv driver by Ralph Metzler,             *
- *   Marcus Metzler and Gerd Knorr.                                        *
- * - I2C interface to kernel, high-level image sensor control routines and *
- *   some symbolic names from OV511 driver by Mark W. McClelland.          *
- * - Low-level I2C fast write function by Piotr Czerczak.                  *
- * - Low-level I2C read function by Frederic Jouault.                      *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/stddef.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-#include <linux/page-flags.h>
-#include <linux/videodev.h>
-#include <media/v4l2-ioctl.h>
-
-#include "w9968cf.h"
-#include "w9968cf_decoder.h"
-
-static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
-
-static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
-static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */
-
-static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */
-
-
-/****************************************************************************
- * Module macros and parameters                                             *
- ****************************************************************************/
-
-MODULE_DEVICE_TABLE(usb, winbond_id_table);
-
-MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL);
-MODULE_DESCRIPTION(W9968CF_MODULE_NAME);
-MODULE_VERSION(W9968CF_MODULE_VERSION);
-MODULE_LICENSE(W9968CF_MODULE_LICENSE);
-MODULE_SUPPORTED_DEVICE("Video");
-
-static unsigned short simcams = W9968CF_SIMCAMS;
-static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
-static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				     W9968CF_PACKET_SIZE};
-static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				       W9968CF_BUFFERS};
-static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-			      W9968CF_DOUBLE_BUFFER};
-static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
-static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
-				      W9968CF_FILTER_TYPE};
-static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
-static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-					 W9968CF_DECOMPRESSION};
-static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
-static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
-static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
-static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
-static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
-static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				     W9968CF_LIGHTFREQ};
-static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
-			      W9968CF_BANDINGFILTER};
-static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
-static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
-static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
-static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
-static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				    W9968CF_BRIGHTNESS};
-static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
-static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
-static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				  W9968CF_CONTRAST};
-static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
-				   W9968CF_WHITENESS};
-#ifdef W9968CF_DEBUG
-static unsigned short debug = W9968CF_DEBUG_LEVEL;
-static int specific_debug = W9968CF_SPECIFIC_DEBUG;
-#endif
-
-static unsigned int param_nv[24]; /* number of values per parameter */
-
-module_param(simcams, ushort, 0644);
-module_param_array(video_nr, short, &param_nv[0], 0444);
-module_param_array(packet_size, uint, &param_nv[1], 0444);
-module_param_array(max_buffers, ushort, &param_nv[2], 0444);
-module_param_array(double_buffer, bool, &param_nv[3], 0444);
-module_param_array(clamping, bool, &param_nv[4], 0444);
-module_param_array(filter_type, ushort, &param_nv[5], 0444);
-module_param_array(largeview, bool, &param_nv[6], 0444);
-module_param_array(decompression, ushort, &param_nv[7], 0444);
-module_param_array(upscaling, bool, &param_nv[8], 0444);
-module_param_array(force_palette, ushort, &param_nv[9], 0444);
-module_param_array(force_rgb, ushort, &param_nv[10], 0444);
-module_param_array(autobright, bool, &param_nv[11], 0444);
-module_param_array(autoexp, bool, &param_nv[12], 0444);
-module_param_array(lightfreq, ushort, &param_nv[13], 0444);
-module_param_array(bandingfilter, bool, &param_nv[14], 0444);
-module_param_array(clockdiv, short, &param_nv[15], 0444);
-module_param_array(backlight, bool, &param_nv[16], 0444);
-module_param_array(mirror, bool, &param_nv[17], 0444);
-module_param_array(monochrome, bool, &param_nv[18], 0444);
-module_param_array(brightness, uint, &param_nv[19], 0444);
-module_param_array(hue, uint, &param_nv[20], 0444);
-module_param_array(colour, uint, &param_nv[21], 0444);
-module_param_array(contrast, uint, &param_nv[22], 0444);
-module_param_array(whiteness, uint, &param_nv[23], 0444);
-#ifdef W9968CF_DEBUG
-module_param(debug, ushort, 0644);
-module_param(specific_debug, bool, 0644);
-#endif
-
-MODULE_PARM_DESC(simcams,
-		 "\n<n> Number of cameras allowed to stream simultaneously."
-		 "\nn may vary from 0 to "
-		 __MODULE_STRING(W9968CF_MAX_DEVICES)"."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
-		 "\n");
-MODULE_PARM_DESC(video_nr,
-		 "\n<-1|n[,...]> Specify V4L minor mode number."
-		 "\n -1 = use next available (default)"
-		 "\n  n = use minor number n (integer >= 0)"
-		 "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
-		 " cameras this way."
-		 "\nFor example:"
-		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
-		 "\nthe second camera and use auto for the first"
-		 "\none and for every other camera."
-		 "\n");
-MODULE_PARM_DESC(packet_size,
-		 "\n<n[,...]> Specify the maximum data payload"
-		 "\nsize in bytes for alternate settings, for each device."
-		 "\nn is scaled between 63 and 1023 "
-		 "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
-		 "\n");
-MODULE_PARM_DESC(max_buffers,
-		 "\n<n[,...]> For advanced users."
-		 "\nSpecify the maximum number of video frame buffers"
-		 "\nto allocate for each device, from 2 to "
-		 __MODULE_STRING(W9968CF_MAX_BUFFERS)
-		 ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
-		 "\n");
-MODULE_PARM_DESC(double_buffer,
-		 "\n<0|1[,...]> "
-		 "Hardware double buffering: 0 disabled, 1 enabled."
-		 "\nIt should be enabled if you want smooth video output: if"
-		 "\nyou obtain out of sync. video, disable it, or try to"
-		 "\ndecrease the 'clockdiv' module parameter value."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(clamping,
-		 "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(filter_type,
-		 "\n<0|1|2[,...]> Video filter type."
-		 "\n0 none, 1 (1-2-1) 3-tap filter, "
-		 "2 (2-3-6-3-2) 5-tap filter."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
-		 " for every device."
-		 "\nThe filter is used to reduce noise and aliasing artifacts"
-		 "\nproduced by the CCD or CMOS image sensor, and the scaling"
-		 " process."
-		 "\n");
-MODULE_PARM_DESC(largeview,
-		 "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(upscaling,
-		 "\n<0|1[,...]> Software scaling (for non-compressed video):"
-		 "\n0 disabled, 1 enabled."
-		 "\nDisable it if you have a slow CPU or you don't have"
-		 " enough memory."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
-		 " for every device."
-		 "\nIf 'w9968cf-vpp' is not present, this parameter is"
-		 " set to 0."
-		 "\n");
-MODULE_PARM_DESC(decompression,
-		 "\n<0|1|2[,...]> Software video decompression:"
-		 "\n- 0 disables decompression (doesn't allow formats needing"
-		 " decompression)"
-		 "\n- 1 forces decompression (allows formats needing"
-		 " decompression only);"
-		 "\n- 2 allows any permitted formats."
-		 "\nFormats supporting compressed video are YUV422P and"
-		 " YUV420P/YUV420 "
-		 "\nin any resolutions where both width and height are "
-		 "a multiple of 16."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
-		 " for every device."
-		 "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
-		 "\nnot allowed; in this case this parameter is set to 2."
-		 "\n");
-MODULE_PARM_DESC(force_palette,
-		 "\n<0"
-		 "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
-		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
-		 "[,...]>"
-		 " Force picture palette."
-		 "\nIn order:"
-		 "\n- 0 allows any of the following formats:"
-		 "\n- UYVY    16 bpp - Original video, compression disabled"
-		 "\n- YUV420  12 bpp - Original video, compression enabled"
-		 "\n- YUV422P 16 bpp - Original video, compression enabled"
-		 "\n- YUV420P 12 bpp - Original video, compression enabled"
-		 "\n- YUVY    16 bpp - Software conversion from UYVY"
-		 "\n- YUV422  16 bpp - Software conversion from UYVY"
-		 "\n- GREY     8 bpp - Software conversion from UYVY"
-		 "\n- RGB555  16 bpp - Software conversion from UYVY"
-		 "\n- RGB565  16 bpp - Software conversion from UYVY"
-		 "\n- RGB24   24 bpp - Software conversion from UYVY"
-		 "\n- RGB32   32 bpp - Software conversion from UYVY"
-		 "\nWhen not 0, this parameter will override 'decompression'."
-		 "\nDefault value is 0 for every device."
-		 "\nInitial palette is "
-		 __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
-		 "\nIf 'w9968cf-vpp' is not present, this parameter is"
-		 " set to 9 (UYVY)."
-		 "\n");
-MODULE_PARM_DESC(force_rgb,
-		 "\n<0|1[,...]> Read RGB video data instead of BGR:"
-		 "\n 1 = use RGB component ordering."
-		 "\n 0 = use BGR component ordering."
-		 "\nThis parameter has effect when using RGBX palettes only."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(autobright,
-		 "\n<0|1[,...]> Image sensor automatically changes brightness:"
-		 "\n 0 = no, 1 = yes"
-		 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(autoexp,
-		 "\n<0|1[,...]> Image sensor automatically changes exposure:"
-		 "\n 0 = no, 1 = yes"
-		 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(lightfreq,
-		 "\n<50|60[,...]> Light frequency in Hz:"
-		 "\n 50 for European and Asian lighting,"
-		 " 60 for American lighting."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(bandingfilter,
-		 "\n<0|1[,...]> Banding filter to reduce effects of"
-		 " fluorescent lighting:"
-		 "\n 0 disabled, 1 enabled."
-		 "\nThis filter tries to reduce the pattern of horizontal"
-		 "\nlight/dark bands caused by some (usually fluorescent)"
-		 " lighting."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(clockdiv,
-		 "\n<-1|n[,...]> "
-		 "Force pixel clock divisor to a specific value (for experts):"
-		 "\n  n may vary from 0 to 127."
-		 "\n -1 for automatic value."
-		 "\nSee also the 'double_buffer' module parameter."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(backlight,
-		 "\n<0|1[,...]> Objects are lit from behind:"
-		 "\n 0 = no, 1 = yes"
-		 "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(mirror,
-		 "\n<0|1[,...]> Reverse image horizontally:"
-		 "\n 0 = no, 1 = yes"
-		 "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(monochrome,
-		 "\n<0|1[,...]> Use image sensor as monochrome sensor:"
-		 "\n 0 = no, 1 = yes"
-		 "\nNot all the sensors support monochrome color."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(brightness,
-		 "\n<n[,...]> Set picture brightness (0-65535)."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
-		 " for every device."
-		 "\nThis parameter has no effect if 'autobright' is enabled."
-		 "\n");
-MODULE_PARM_DESC(hue,
-		 "\n<n[,...]> Set picture hue (0-65535)."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(colour,
-		 "\n<n[,...]> Set picture saturation (0-65535)."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(contrast,
-		 "\n<n[,...]> Set picture contrast (0-65535)."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
-		 " for every device."
-		 "\n");
-MODULE_PARM_DESC(whiteness,
-		 "\n<n[,...]> Set picture whiteness (0-65535)."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
-		 " for every device."
-		 "\n");
-#ifdef W9968CF_DEBUG
-MODULE_PARM_DESC(debug,
-		 "\n<n> Debugging information level, from 0 to 6:"
-		 "\n0 = none (use carefully)"
-		 "\n1 = critical errors"
-		 "\n2 = significant informations"
-		 "\n3 = configuration or general messages"
-		 "\n4 = warnings"
-		 "\n5 = called functions"
-		 "\n6 = function internals"
-		 "\nLevel 5 and 6 are useful for testing only, when only "
-		 "one device is used."
-		 "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
-		 "\n");
-MODULE_PARM_DESC(specific_debug,
-		 "\n<0|1> Enable or disable specific debugging messages:"
-		 "\n0 = print messages concerning every level"
-		 " <= 'debug' level."
-		 "\n1 = print messages concerning the level"
-		 " indicated by 'debug'."
-		 "\nDefault value is "
-		 __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
-		 "\n");
-#endif /* W9968CF_DEBUG */
-
-
-
-/****************************************************************************
- * Some prototypes                                                          *
- ****************************************************************************/
-
-/* Video4linux interface */
-static const struct v4l2_file_operations w9968cf_fops;
-static int w9968cf_open(struct file *);
-static int w9968cf_release(struct file *);
-static int w9968cf_mmap(struct file *, struct vm_area_struct *);
-static long w9968cf_ioctl(struct file *, unsigned, unsigned long);
-static ssize_t w9968cf_read(struct file *, char __user *, size_t, loff_t *);
-static long w9968cf_v4l_ioctl(struct file *, unsigned int,
-			     void __user *);
-
-/* USB-specific */
-static int w9968cf_start_transfer(struct w9968cf_device*);
-static int w9968cf_stop_transfer(struct w9968cf_device*);
-static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index);
-static int w9968cf_read_reg(struct w9968cf_device*, u16 index);
-static int w9968cf_write_fsb(struct w9968cf_device*, u16* data);
-static int w9968cf_write_sb(struct w9968cf_device*, u16 value);
-static int w9968cf_read_sb(struct w9968cf_device*);
-static int w9968cf_upload_quantizationtables(struct w9968cf_device*);
-static void w9968cf_urb_complete(struct urb *urb);
-
-/* Low-level I2C (SMBus) I/O */
-static int w9968cf_smbus_start(struct w9968cf_device*);
-static int w9968cf_smbus_stop(struct w9968cf_device*);
-static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v);
-static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v);
-static int w9968cf_smbus_write_ack(struct w9968cf_device*);
-static int w9968cf_smbus_read_ack(struct w9968cf_device*);
-static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
-static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
-				      u16 address, u8* value);
-static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
-					   u8 subaddress, u8* value);
-static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
-				       u16 address, u8 subaddress);
-static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
-						u16 address, u8 subaddress,
-						u8 value);
-
-/* I2C interface to kernel */
-static int w9968cf_i2c_init(struct w9968cf_device*);
-static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
-				  unsigned short flags, char read_write,
-				  u8 command, int size, union i2c_smbus_data*);
-static u32 w9968cf_i2c_func(struct i2c_adapter*);
-
-/* Memory management */
-static void* rvmalloc(unsigned long size);
-static void rvfree(void *mem, unsigned long size);
-static void w9968cf_deallocate_memory(struct w9968cf_device*);
-static int  w9968cf_allocate_memory(struct w9968cf_device*);
-
-/* High-level image sensor control functions */
-static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
-static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
-static int w9968cf_sensor_cmd(struct w9968cf_device*,
-			      unsigned int cmd, void *arg);
-static int w9968cf_sensor_init(struct w9968cf_device*);
-static int w9968cf_sensor_update_settings(struct w9968cf_device*);
-static int w9968cf_sensor_get_picture(struct w9968cf_device*);
-static int w9968cf_sensor_update_picture(struct w9968cf_device*,
-					 struct video_picture pict);
-
-/* Other helper functions */
-static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
-				     enum w9968cf_model_id,
-				     const unsigned short dev_nr);
-static void w9968cf_adjust_configuration(struct w9968cf_device*);
-static int w9968cf_turn_on_led(struct w9968cf_device*);
-static int w9968cf_init_chip(struct w9968cf_device*);
-static inline u16 w9968cf_valid_palette(u16 palette);
-static inline u16 w9968cf_valid_depth(u16 palette);
-static inline u8 w9968cf_need_decompression(u16 palette);
-static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
-static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
-static int w9968cf_postprocess_frame(struct w9968cf_device*,
-				     struct w9968cf_frame_t*);
-static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h);
-static void w9968cf_init_framelist(struct w9968cf_device*);
-static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
-static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
-static void w9968cf_release_resources(struct w9968cf_device*);
-
-
-
-/****************************************************************************
- * Symbolic names                                                           *
- ****************************************************************************/
-
-/* Used to represent a list of values and their respective symbolic names */
-struct w9968cf_symbolic_list {
-	const int num;
-	const char *name;
-};
-
-/*--------------------------------------------------------------------------
-  Returns the name of the matching element in the symbolic_list array. The
-  end of the list must be marked with an element that has a NULL name.
-  --------------------------------------------------------------------------*/
-static inline const char *
-symbolic(struct w9968cf_symbolic_list list[], const int num)
-{
-	int i;
-
-	for (i = 0; list[i].name != NULL; i++)
-		if (list[i].num == num)
-			return (list[i].name);
-
-	return "Unknown";
-}
-
-static struct w9968cf_symbolic_list camlist[] = {
-	{ W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" },
-	{ W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" },
-
-	/* Other cameras (having the same descriptors as Generic W996[87]CF) */
-	{ W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" },
-	{ W9986CF_MOD_AAU, "AVerMedia AVerTV USB" },
-	{ W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" },
-	{ W9968CF_MOD_LL, "Lebon LDC-035A" },
-	{ W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" },
-	{ W9968CF_MOD_OOE, "OmniVision OV8610-EDE" },
-	{ W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" },
-	{ W9968CF_MOD_PDPII, "Pretec Digi Pen-II" },
-	{ W9968CF_MOD_PDP480, "Pretec DigiPen-480" },
-
-	{  -1, NULL }
-};
-
-static struct w9968cf_symbolic_list senlist[] = {
-	{ CC_OV76BE,   "OV76BE" },
-	{ CC_OV7610,   "OV7610" },
-	{ CC_OV7620,   "OV7620" },
-	{ CC_OV7620AE, "OV7620AE" },
-	{ CC_OV6620,   "OV6620" },
-	{ CC_OV6630,   "OV6630" },
-	{ CC_OV6630AE, "OV6630AE" },
-	{ CC_OV6630AF, "OV6630AF" },
-	{ -1, NULL }
-};
-
-/* Video4Linux1 palettes */
-static struct w9968cf_symbolic_list v4l1_plist[] = {
-	{ VIDEO_PALETTE_GREY,    "GREY" },
-	{ VIDEO_PALETTE_HI240,   "HI240" },
-	{ VIDEO_PALETTE_RGB565,  "RGB565" },
-	{ VIDEO_PALETTE_RGB24,   "RGB24" },
-	{ VIDEO_PALETTE_RGB32,   "RGB32" },
-	{ VIDEO_PALETTE_RGB555,  "RGB555" },
-	{ VIDEO_PALETTE_YUV422,  "YUV422" },
-	{ VIDEO_PALETTE_YUYV,    "YUYV" },
-	{ VIDEO_PALETTE_UYVY,    "UYVY" },
-	{ VIDEO_PALETTE_YUV420,  "YUV420" },
-	{ VIDEO_PALETTE_YUV411,  "YUV411" },
-	{ VIDEO_PALETTE_RAW,     "RAW" },
-	{ VIDEO_PALETTE_YUV422P, "YUV422P" },
-	{ VIDEO_PALETTE_YUV411P, "YUV411P" },
-	{ VIDEO_PALETTE_YUV420P, "YUV420P" },
-	{ VIDEO_PALETTE_YUV410P, "YUV410P" },
-	{ -1, NULL }
-};
-
-/* Decoder error codes: */
-static struct w9968cf_symbolic_list decoder_errlist[] = {
-	{ W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
-	{ W9968CF_DEC_ERR_BUF_OVERFLOW,   "Buffer overflow" },
-	{ W9968CF_DEC_ERR_NO_SOI,         "SOI marker not found" },
-	{ W9968CF_DEC_ERR_NO_SOF0,        "SOF0 marker not found" },
-	{ W9968CF_DEC_ERR_NO_SOS,         "SOS marker not found" },
-	{ W9968CF_DEC_ERR_NO_EOI,         "EOI marker not found" },
-	{ -1, NULL }
-};
-
-/* URB error codes: */
-static struct w9968cf_symbolic_list urb_errlist[] = {
-	{ -ENOMEM,    "No memory for allocation of internal structures" },
-	{ -ENOSPC,    "The host controller's bandwidth is already consumed" },
-	{ -ENOENT,    "URB was canceled by unlink_urb" },
-	{ -EXDEV,     "ISO transfer only partially completed" },
-	{ -EAGAIN,    "Too match scheduled for the future" },
-	{ -ENXIO,     "URB already queued" },
-	{ -EFBIG,     "Too much ISO frames requested" },
-	{ -ENOSR,     "Buffer error (overrun)" },
-	{ -EPIPE,     "Specified endpoint is stalled (device not responding)"},
-	{ -EOVERFLOW, "Babble (too much data)" },
-	{ -EPROTO,    "Bit-stuff error (bad cable?)" },
-	{ -EILSEQ,    "CRC/Timeout" },
-	{ -ETIME,     "Device does not respond to token" },
-	{ -ETIMEDOUT, "Device does not respond to command" },
-	{ -1, NULL }
-};
-
-/****************************************************************************
- * Memory management functions                                              *
- ****************************************************************************/
-static void* rvmalloc(unsigned long size)
-{
-	void* mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-
-static void rvfree(void* mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-
-/*--------------------------------------------------------------------------
-  Deallocate previously allocated memory.
-  --------------------------------------------------------------------------*/
-static void w9968cf_deallocate_memory(struct w9968cf_device* cam)
-{
-	u8 i;
-
-	/* Free the isochronous transfer buffers */
-	for (i = 0; i < W9968CF_URBS; i++) {
-		kfree(cam->transfer_buffer[i]);
-		cam->transfer_buffer[i] = NULL;
-	}
-
-	/* Free temporary frame buffer */
-	if (cam->frame_tmp.buffer) {
-		rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size);
-		cam->frame_tmp.buffer = NULL;
-	}
-
-	/* Free helper buffer */
-	if (cam->frame_vpp.buffer) {
-		rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size);
-		cam->frame_vpp.buffer = NULL;
-	}
-
-	/* Free video frame buffers */
-	if (cam->frame[0].buffer) {
-		rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size);
-		cam->frame[0].buffer = NULL;
-	}
-
-	cam->nbuffers = 0;
-
-	DBG(5, "Memory successfully deallocated")
-}
-
-
-/*--------------------------------------------------------------------------
-  Allocate memory buffers for USB transfers and video frames.
-  This function is called by open() only.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_allocate_memory(struct w9968cf_device* cam)
-{
-	const u16 p_size = wMaxPacketSize[cam->altsetting-1];
-	void* buff = NULL;
-	unsigned long hw_bufsize, vpp_bufsize;
-	u8 i, bpp;
-
-	/* NOTE: Deallocation is done elsewhere in case of error */
-
-	/* Calculate the max amount of raw data per frame from the device */
-	hw_bufsize = cam->maxwidth*cam->maxheight*2;
-
-	/* Calculate the max buf. size needed for post-processing routines */
-	bpp = (w9968cf_vpp) ? 4 : 2;
-	if (cam->upscaling)
-		vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
-				  cam->maxwidth*cam->maxheight*bpp);
-	else
-		vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
-
-	/* Allocate memory for the isochronous transfer buffers */
-	for (i = 0; i < W9968CF_URBS; i++) {
-		if (!(cam->transfer_buffer[i] =
-		      kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
-			DBG(1, "Couldn't allocate memory for the isochronous "
-			       "transfer buffers (%u bytes)",
-			    p_size * W9968CF_ISO_PACKETS)
-			return -ENOMEM;
-		}
-	}
-
-	/* Allocate memory for the temporary frame buffer */
-	if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) {
-		DBG(1, "Couldn't allocate memory for the temporary "
-		       "video frame buffer (%lu bytes)", hw_bufsize)
-		return -ENOMEM;
-	}
-	cam->frame_tmp.size = hw_bufsize;
-	cam->frame_tmp.number = -1;
-
-	/* Allocate memory for the helper buffer */
-	if (w9968cf_vpp) {
-		if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) {
-			DBG(1, "Couldn't allocate memory for the helper buffer"
-			       " (%lu bytes)", vpp_bufsize)
-			return -ENOMEM;
-		}
-		cam->frame_vpp.size = vpp_bufsize;
-	} else
-		cam->frame_vpp.buffer = NULL;
-
-	/* Allocate memory for video frame buffers */
-	cam->nbuffers = cam->max_buffers;
-	while (cam->nbuffers >= 2) {
-		if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize)))
-			break;
-		else
-			cam->nbuffers--;
-	}
-
-	if (!buff) {
-		DBG(1, "Couldn't allocate memory for the video frame buffers")
-		cam->nbuffers = 0;
-		return -ENOMEM;
-	}
-
-	if (cam->nbuffers != cam->max_buffers)
-		DBG(2, "Couldn't allocate memory for %u video frame buffers. "
-		       "Only memory for %u buffers has been allocated",
-		    cam->max_buffers, cam->nbuffers)
-
-	for (i = 0; i < cam->nbuffers; i++) {
-		cam->frame[i].buffer = buff + i*vpp_bufsize;
-		cam->frame[i].size = vpp_bufsize;
-		cam->frame[i].number = i;
-		/* Circular list */
-		if (i != cam->nbuffers-1)
-			cam->frame[i].next = &cam->frame[i+1];
-		else
-			cam->frame[i].next = &cam->frame[0];
-		cam->frame[i].status = F_UNUSED;
-	}
-
-	DBG(5, "Memory successfully allocated")
-	return 0;
-}
-
-
-
-/****************************************************************************
- * USB-specific functions                                                   *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
-  This is an handler function which is called after the URBs are completed.
-  It collects multiple data packets coming from the camera by putting them
-  into frame buffers: one or more zero data length data packets are used to
-  mark the end of a video frame; the first non-zero data packet is the start
-  of the next video frame; if an error is encountered in a packet, the entire
-  video frame is discarded and grabbed again.
-  If there are no requested frames in the FIFO list, packets are collected into
-  a temporary buffer.
-  --------------------------------------------------------------------------*/
-static void w9968cf_urb_complete(struct urb *urb)
-{
-	struct w9968cf_device* cam = (struct w9968cf_device*)urb->context;
-	struct w9968cf_frame_t** f;
-	unsigned int len, status;
-	void* pos;
-	u8 i;
-	int err = 0;
-
-	if ((!cam->streaming) || cam->disconnected) {
-		DBG(4, "Got interrupt, but not streaming")
-		return;
-	}
-
-	/* "(*f)" will be used instead of "cam->frame_current" */
-	f = &cam->frame_current;
-
-	/* If a frame has been requested and we are grabbing into
-	   the temporary frame, we'll switch to that requested frame */
-	if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
-		if (cam->frame_tmp.status == F_GRABBING) {
-			w9968cf_pop_frame(cam, &cam->frame_current);
-			(*f)->status = F_GRABBING;
-			(*f)->length = cam->frame_tmp.length;
-			memcpy((*f)->buffer, cam->frame_tmp.buffer,
-			       (*f)->length);
-			DBG(6, "Switched from temp. frame to frame #%d",
-			    (*f)->number)
-		}
-	}
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		len = urb->iso_frame_desc[i].actual_length;
-		status = urb->iso_frame_desc[i].status;
-		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
-
-		if (status && len != 0) {
-			DBG(4, "URB failed, error in data packet "
-			       "(error #%u, %s)",
-			    status, symbolic(urb_errlist, status))
-			(*f)->status = F_ERROR;
-			continue;
-		}
-
-		if (len) { /* start of frame */
-
-			if ((*f)->status == F_UNUSED) {
-				(*f)->status = F_GRABBING;
-				(*f)->length = 0;
-			}
-
-			/* Buffer overflows shouldn't happen, however...*/
-			if ((*f)->length + len > (*f)->size) {
-				DBG(4, "Buffer overflow: bad data packets")
-				(*f)->status = F_ERROR;
-			}
-
-			if ((*f)->status == F_GRABBING) {
-				memcpy((*f)->buffer + (*f)->length, pos, len);
-				(*f)->length += len;
-			}
-
-		} else if ((*f)->status == F_GRABBING) { /* end of frame */
-
-			DBG(6, "Frame #%d successfully grabbed", (*f)->number)
-
-			if (cam->vpp_flag & VPP_DECOMPRESSION) {
-				err = w9968cf_vpp->check_headers((*f)->buffer,
-								 (*f)->length);
-				if (err) {
-					DBG(4, "Skip corrupted frame: %s",
-					    symbolic(decoder_errlist, err))
-					(*f)->status = F_UNUSED;
-					continue; /* grab this frame again */
-				}
-			}
-
-			(*f)->status = F_READY;
-			(*f)->queued = 0;
-
-			/* Take a pointer to the new frame from the FIFO list.
-			   If the list is empty,we'll use the temporary frame*/
-			if (*cam->requested_frame)
-				w9968cf_pop_frame(cam, &cam->frame_current);
-			else {
-				cam->frame_current = &cam->frame_tmp;
-				(*f)->status = F_UNUSED;
-			}
-
-		} else if ((*f)->status == F_ERROR)
-			(*f)->status = F_UNUSED; /* grab it again */
-
-		PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d",
-		      (unsigned long)(*f)->length, i, len, (*f)->status)
-
-	} /* end for */
-
-	/* Resubmit this URB */
-	urb->dev = cam->usbdev;
-	urb->status = 0;
-	spin_lock(&cam->urb_lock);
-	if (cam->streaming)
-		if ((err = usb_submit_urb(urb, GFP_ATOMIC))) {
-			cam->misconfigured = 1;
-			DBG(1, "Couldn't resubmit the URB: error %d, %s",
-			    err, symbolic(urb_errlist, err))
-		}
-	spin_unlock(&cam->urb_lock);
-
-	/* Wake up the user process */
-	wake_up_interruptible(&cam->wait_queue);
-}
-
-
-/*---------------------------------------------------------------------------
-  Setup the URB structures for the isochronous transfer.
-  Submit the URBs so that the data transfer begins.
-  Return 0 on success, a negative number otherwise.
-  ---------------------------------------------------------------------------*/
-static int w9968cf_start_transfer(struct w9968cf_device* cam)
-{
-	struct usb_device *udev = cam->usbdev;
-	struct urb* urb;
-	const u16 p_size = wMaxPacketSize[cam->altsetting-1];
-	u16 w, h, d;
-	int vidcapt;
-	u32 t_size;
-	int err = 0;
-	s8 i, j;
-
-	for (i = 0; i < W9968CF_URBS; i++) {
-		urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
-		if (!urb) {
-			for (j = 0; j < i; j++)
-				usb_free_urb(cam->urb[j]);
-			DBG(1, "Couldn't allocate the URB structures")
-			return -ENOMEM;
-		}
-
-		cam->urb[i] = urb;
-		urb->dev = udev;
-		urb->context = (void*)cam;
-		urb->pipe = usb_rcvisocpipe(udev, 1);
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->number_of_packets = W9968CF_ISO_PACKETS;
-		urb->complete = w9968cf_urb_complete;
-		urb->transfer_buffer = cam->transfer_buffer[i];
-		urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS;
-		urb->interval = 1;
-		for (j = 0; j < W9968CF_ISO_PACKETS; j++) {
-			urb->iso_frame_desc[j].offset = p_size*j;
-			urb->iso_frame_desc[j].length = p_size;
-		}
-	}
-
-	/* Transfer size per frame, in WORD ! */
-	d = cam->hw_depth;
-	w = cam->hw_width;
-	h = cam->hw_height;
-
-	t_size = (w*h*d)/16;
-
-	err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
-	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
-
-	/* Transfer size */
-	err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */
-	err += w9968cf_write_reg(cam, t_size >> 16, 0x3e);    /* high bits */
-
-	if (cam->vpp_flag & VPP_DECOMPRESSION)
-		err += w9968cf_upload_quantizationtables(cam);
-
-	vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */
-	err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */
-
-	err += usb_set_interface(udev, 0, cam->altsetting);
-	err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */
-
-	if (err || (vidcapt < 0)) {
-		for (i = 0; i < W9968CF_URBS; i++)
-			usb_free_urb(cam->urb[i]);
-		DBG(1, "Couldn't tell the camera to start the data transfer")
-		return err;
-	}
-
-	w9968cf_init_framelist(cam);
-
-	/* Begin to grab into the temporary buffer */
-	cam->frame_tmp.status = F_UNUSED;
-	cam->frame_tmp.queued = 0;
-	cam->frame_current = &cam->frame_tmp;
-
-	if (!(cam->vpp_flag & VPP_DECOMPRESSION))
-		DBG(5, "Isochronous transfer size: %lu bytes/frame",
-		    (unsigned long)t_size*2)
-
-	DBG(5, "Starting the isochronous transfer...")
-
-	cam->streaming = 1;
-
-	/* Submit the URBs */
-	for (i = 0; i < W9968CF_URBS; i++) {
-		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
-		if (err) {
-			cam->streaming = 0;
-			for (j = i-1; j >= 0; j--) {
-				usb_kill_urb(cam->urb[j]);
-				usb_free_urb(cam->urb[j]);
-			}
-			DBG(1, "Couldn't send a transfer request to the "
-			       "USB core (error #%d, %s)", err,
-			    symbolic(urb_errlist, err))
-			return err;
-		}
-	}
-
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Stop the isochronous transfer and set alternate setting to 0 (0Mb/s).
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_stop_transfer(struct w9968cf_device* cam)
-{
-	struct usb_device *udev = cam->usbdev;
-	unsigned long lock_flags;
-	int err = 0;
-	s8 i;
-
-	if (!cam->streaming)
-		return 0;
-
-	/* This avoids race conditions with usb_submit_urb()
-	   in the URB completition handler */
-	spin_lock_irqsave(&cam->urb_lock, lock_flags);
-	cam->streaming = 0;
-	spin_unlock_irqrestore(&cam->urb_lock, lock_flags);
-
-	for (i = W9968CF_URBS-1; i >= 0; i--)
-		if (cam->urb[i]) {
-			usb_kill_urb(cam->urb[i]);
-			usb_free_urb(cam->urb[i]);
-			cam->urb[i] = NULL;
-		}
-
-	if (cam->disconnected)
-		goto exit;
-
-	err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */
-	err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */
-	err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */
-	err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */
-
-	if (err) {
-		DBG(2, "Failed to tell the camera to stop the isochronous "
-		       "transfer. However this is not a critical error.")
-		return -EIO;
-	}
-
-exit:
-	DBG(5, "Isochronous transfer stopped")
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Write a W9968CF register.
-  Return 0 on success, -1 otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
-{
-	struct usb_device* udev = cam->usbdev;
-	int res;
-
-	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
-
-	if (res < 0)
-		DBG(4, "Failed to write a register "
-		       "(value 0x%04X, index 0x%02X, error #%d, %s)",
-		    value, index, res, symbolic(urb_errlist, res))
-
-	return (res >= 0) ? 0 : -1;
-}
-
-
-/*--------------------------------------------------------------------------
-  Read a W9968CF register.
-  Return the register value on success, -1 otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
-{
-	struct usb_device* udev = cam->usbdev;
-	u16* buff = cam->control_buffer;
-	int res;
-
-	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
-			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
-
-	if (res < 0)
-		DBG(4, "Failed to read a register "
-		       "(index 0x%02X, error #%d, %s)",
-		    index, res, symbolic(urb_errlist, res))
-
-	return (res >= 0) ? (int)(*buff) : -1;
-}
-
-
-/*--------------------------------------------------------------------------
-  Write 64-bit data to the fast serial bus registers.
-  Return 0 on success, -1 otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data)
-{
-	struct usb_device* udev = cam->usbdev;
-	u16 value;
-	int res;
-
-	value = *data++;
-
-	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
-
-	if (res < 0)
-		DBG(4, "Failed to write the FSB registers "
-		       "(error #%d, %s)", res, symbolic(urb_errlist, res))
-
-	return (res >= 0) ? 0 : -1;
-}
-
-
-/*--------------------------------------------------------------------------
-  Write data to the serial bus control register.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value)
-{
-	int err = 0;
-
-	err = w9968cf_write_reg(cam, value, 0x01);
-	udelay(W9968CF_I2C_BUS_DELAY);
-
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Read data from the serial bus control register.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_read_sb(struct w9968cf_device* cam)
-{
-	int v = 0;
-
-	v = w9968cf_read_reg(cam, 0x01);
-	udelay(W9968CF_I2C_BUS_DELAY);
-
-	return v;
-}
-
-
-/*--------------------------------------------------------------------------
-  Upload quantization tables for the JPEG compression.
-  This function is called by w9968cf_start_transfer().
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam)
-{
-	u16 a, b;
-	int err = 0, i, j;
-
-	err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */
-
-	for (i = 0, j = 0; i < 32; i++, j += 2) {
-		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
-		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
-		err += w9968cf_write_reg(cam, a, 0x40+i);
-		err += w9968cf_write_reg(cam, b, 0x60+i);
-	}
-	err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */
-
-	return err;
-}
-
-
-
-/****************************************************************************
- * Low-level I2C I/O functions.                                             *
- * The adapter supports the following I2C transfer functions:               *
- * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only)           *
- * i2c_adap_read_byte_data()                                                *
- * i2c_adap_read_byte()                                                     *
- ****************************************************************************/
-
-static int w9968cf_smbus_start(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
-	return err;
-}
-
-
-static int w9968cf_smbus_stop(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-
-	return err;
-}
-
-
-static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v)
-{
-	u8 bit;
-	int err = 0, sda;
-
-	for (bit = 0 ; bit < 8 ; bit++) {
-		sda = (v & 0x80) ? 2 : 0;
-		v <<= 1;
-		/* SDE=1, SDA=sda, SCL=0 */
-		err += w9968cf_write_sb(cam, 0x10 | sda);
-		/* SDE=1, SDA=sda, SCL=1 */
-		err += w9968cf_write_sb(cam, 0x11 | sda);
-		/* SDE=1, SDA=sda, SCL=0 */
-		err += w9968cf_write_sb(cam, 0x10 | sda);
-	}
-
-	return err;
-}
-
-
-static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v)
-{
-	u8 bit;
-	int err = 0;
-
-	*v = 0;
-	for (bit = 0 ; bit < 8 ; bit++) {
-		*v <<= 1;
-		err += w9968cf_write_sb(cam, 0x0013);
-		*v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0;
-		err += w9968cf_write_sb(cam, 0x0012);
-	}
-
-	return err;
-}
-
-
-static int w9968cf_smbus_write_ack(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
-	return err;
-}
-
-
-static int w9968cf_smbus_read_ack(struct w9968cf_device* cam)
-{
-	int err = 0, sda;
-
-	err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-	sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */
-	err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-	if (sda < 0)
-		err += sda;
-	if (sda == 1) {
-		DBG(6, "Couldn't receive the ACK")
-		err += -1;
-	}
-
-	return err;
-}
-
-
-/* This seems to refresh the communication through the serial bus */
-static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam)
-{
-	int err = 0, j;
-
-	for (j = 1; j <= 10; j++) {
-		err = w9968cf_write_reg(cam, 0x0020, 0x01);
-		err += w9968cf_write_reg(cam, 0x0000, 0x01);
-		if (err)
-			break;
-	}
-
-	return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int
-w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
-				     u16 address, u8 subaddress,u8 value)
-{
-	u16* data = cam->data_buffer;
-	int err = 0;
-
-	err += w9968cf_smbus_refresh_bus(cam);
-
-	/* Enable SBUS outputs */
-	err += w9968cf_write_sb(cam, 0x0020);
-
-	data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0);
-	data[0] |= (address & 0x40) ? 0x4000 : 0x0;
-	data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0);
-	data[1] |= (address & 0x20) ? 0x0150 : 0x0;
-	data[1] |= (address & 0x10) ? 0x5400 : 0x0;
-	data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0);
-	data[2] |= (address & 0x04) ? 0x0540 : 0x0;
-	data[2] |= (address & 0x02) ? 0x5000 : 0x0;
-	data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0);
-	data[3] |= (address & 0x01) ? 0x0054 : 0x0;
-
-	err += w9968cf_write_fsb(cam, data);
-
-	data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0);
-	data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0;
-	data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0;
-	data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0);
-	data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0;
-	data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0;
-	data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0;
-	data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0);
-	data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0;
-	data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0;
-	data[3] = 0x001d;
-
-	err += w9968cf_write_fsb(cam, data);
-
-	data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
-	data[0] |= (value & 0x40) ? 0x0540 : 0x0;
-	data[0] |= (value & 0x20) ? 0x5000 : 0x0;
-	data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
-	data[1] |= (value & 0x10) ? 0x0054 : 0x0;
-	data[1] |= (value & 0x08) ? 0x1500 : 0x0;
-	data[1] |= (value & 0x04) ? 0x4000 : 0x0;
-	data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
-	data[2] |= (value & 0x02) ? 0x0150 : 0x0;
-	data[2] |= (value & 0x01) ? 0x5400 : 0x0;
-	data[3] = 0xfe1d;
-
-	err += w9968cf_write_fsb(cam, data);
-
-	/* Disable SBUS outputs */
-	err += w9968cf_write_sb(cam, 0x0000);
-
-	if (!err)
-		DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X "
-		       "value 0x%02X", address, subaddress, value)
-	else
-		DBG(5, "I2C write byte data failed, addr.0x%04X, "
-		       "subaddr.0x%02X, value 0x%02X",
-		    address, subaddress, value)
-
-	return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
-static int
-w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
-				u16 address, u8 subaddress,
-				u8* value)
-{
-	int err = 0;
-
-	/* Serial data enable */
-	err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */
-
-	err += w9968cf_smbus_start(cam);
-	err += w9968cf_smbus_write_byte(cam, address);
-	err += w9968cf_smbus_read_ack(cam);
-	err += w9968cf_smbus_write_byte(cam, subaddress);
-	err += w9968cf_smbus_read_ack(cam);
-	err += w9968cf_smbus_stop(cam);
-	err += w9968cf_smbus_start(cam);
-	err += w9968cf_smbus_write_byte(cam, address + 1);
-	err += w9968cf_smbus_read_ack(cam);
-	err += w9968cf_smbus_read_byte(cam, value);
-	err += w9968cf_smbus_write_ack(cam);
-	err += w9968cf_smbus_stop(cam);
-
-	/* Serial data disable */
-	err += w9968cf_write_sb(cam, 0x0000);
-
-	if (!err)
-		DBG(5, "I2C read byte data done, addr.0x%04X, "
-		       "subaddr.0x%02X, value 0x%02X",
-		    address, subaddress, *value)
-	else
-		DBG(5, "I2C read byte data failed, addr.0x%04X, "
-		       "subaddr.0x%02X, wrong value 0x%02X",
-		    address, subaddress, *value)
-
-	return err;
-}
-
-
-/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
-static int
-w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
-			   u16 address, u8* value)
-{
-	int err = 0;
-
-	/* Serial data enable */
-	err += w9968cf_write_sb(cam, 0x0013);
-
-	err += w9968cf_smbus_start(cam);
-	err += w9968cf_smbus_write_byte(cam, address + 1);
-	err += w9968cf_smbus_read_ack(cam);
-	err += w9968cf_smbus_read_byte(cam, value);
-	err += w9968cf_smbus_write_ack(cam);
-	err += w9968cf_smbus_stop(cam);
-
-	/* Serial data disable */
-	err += w9968cf_write_sb(cam, 0x0000);
-
-	if (!err)
-		DBG(5, "I2C read byte done, addr.0x%04X, "
-		       "value 0x%02X", address, *value)
-	else
-		DBG(5, "I2C read byte failed, addr.0x%04X, "
-		       "wrong value 0x%02X", address, *value)
-
-	return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Value [A] P */
-static int
-w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
-			    u16 address, u8 value)
-{
-	DBG(4, "i2c_write_byte() is an unsupported transfer mode")
-	return -EINVAL;
-}
-
-
-
-/****************************************************************************
- * I2C interface to kernel                                                  *
- ****************************************************************************/
-
-static int
-w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
-		       unsigned short flags, char read_write, u8 command,
-		       int size, union i2c_smbus_data *data)
-{
-	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
-	struct w9968cf_device *cam = to_cam(v4l2_dev);
-	u8 i;
-	int err = 0;
-
-	if (size == I2C_SMBUS_BYTE) {
-		/* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
-		addr <<= 1;
-
-		if (read_write == I2C_SMBUS_WRITE)
-			err = w9968cf_i2c_adap_write_byte(cam, addr, command);
-		else if (read_write == I2C_SMBUS_READ)
-			for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
-				err = w9968cf_i2c_adap_read_byte(cam, addr,
-							 &data->byte);
-				if (err) {
-					if (w9968cf_smbus_refresh_bus(cam)) {
-						err = -EIO;
-						break;
-					}
-				} else
-					break;
-			}
-	} else if (size == I2C_SMBUS_BYTE_DATA) {
-		addr <<= 1;
-
-		if (read_write == I2C_SMBUS_WRITE)
-			err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
-							  command, data->byte);
-		else if (read_write == I2C_SMBUS_READ) {
-			for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
-				err = w9968cf_i2c_adap_read_byte_data(cam,addr,
-							 command, &data->byte);
-				if (err) {
-					if (w9968cf_smbus_refresh_bus(cam)) {
-						err = -EIO;
-						break;
-					}
-				} else
-					break;
-			}
-
-		} else
-			return -EINVAL;
-
-	} else {
-		DBG(4, "Unsupported I2C transfer mode (%d)", size)
-		return -EINVAL;
-	}
-	return err;
-}
-
-
-static u32 w9968cf_i2c_func(struct i2c_adapter* adap)
-{
-	return I2C_FUNC_SMBUS_READ_BYTE |
-	       I2C_FUNC_SMBUS_READ_BYTE_DATA  |
-	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
-}
-
-
-static int w9968cf_i2c_init(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	static struct i2c_algorithm algo = {
-		.smbus_xfer =    w9968cf_i2c_smbus_xfer,
-		.functionality = w9968cf_i2c_func,
-	};
-
-	static struct i2c_adapter adap = {
-		.owner =             THIS_MODULE,
-		.algo =              &algo,
-	};
-
-	memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
-	strcpy(cam->i2c_adapter.name, "w9968cf");
-	cam->i2c_adapter.dev.parent = &cam->usbdev->dev;
-	i2c_set_adapdata(&cam->i2c_adapter, &cam->v4l2_dev);
-
-	DBG(6, "Registering I2C adapter with kernel...")
-
-	err = i2c_add_adapter(&cam->i2c_adapter);
-	if (err)
-		DBG(1, "Failed to register the I2C adapter")
-	else
-		DBG(5, "I2C adapter registered")
-
-	return err;
-}
-
-
-
-/****************************************************************************
- * Helper functions                                                         *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
-  Turn on the LED on some webcams. A beep should be heard too.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_turn_on_led(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */
-	err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
-	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
-	err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */
-	err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */
-	err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */
-
-	if (err)
-		DBG(2, "Couldn't turn on the LED")
-
-	DBG(5, "LED turned on")
-
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Write some registers for the device initialization.
-  This function is called once on open().
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_init_chip(struct w9968cf_device* cam)
-{
-	unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
-		      y0 = 0x0000,
-		      u0 = y0 + hw_bufsize/2,
-		      v0 = u0 + hw_bufsize/4,
-		      y1 = v0 + hw_bufsize/4,
-		      u1 = y1 + hw_bufsize/2,
-		      v1 = u1 + hw_bufsize/4;
-	int err = 0;
-
-	err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
-	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */
-
-	err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */
-	err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */
-
-	err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */
-	err += w9968cf_write_reg(cam, y0 >> 16, 0x21);    /* Y buf.0, high */
-	err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */
-	err += w9968cf_write_reg(cam, u0 >> 16, 0x25);    /* U buf.0, high */
-	err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */
-	err += w9968cf_write_reg(cam, v0 >> 16, 0x29);    /* V buf.0, high */
-
-	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */
-	err += w9968cf_write_reg(cam, y1 >> 16, 0x23);    /* Y buf.1, high */
-	err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */
-	err += w9968cf_write_reg(cam, u1 >> 16, 0x27);    /* U buf.1, high */
-	err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */
-	err += w9968cf_write_reg(cam, v1 >> 16, 0x2b);    /* V buf.1, high */
-
-	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */
-	err += w9968cf_write_reg(cam, y1 >> 16, 0x33);    /* JPEG buf 0 high */
-
-	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */
-	err += w9968cf_write_reg(cam, y1 >> 16, 0x35);    /* JPEG bug 1 high */
-
-	err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */
-	err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/
-	err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */
-	err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */
-
-	err += w9968cf_set_picture(cam, cam->picture); /* this before */
-	err += w9968cf_set_window(cam, cam->window);
-
-	if (err)
-		DBG(1, "Chip initialization failed")
-	else
-		DBG(5, "Chip successfully initialized")
-
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Return non-zero if the palette is supported, 0 otherwise.
-  --------------------------------------------------------------------------*/
-static inline u16 w9968cf_valid_palette(u16 palette)
-{
-	u8 i = 0;
-	while (w9968cf_formatlist[i].palette != 0) {
-		if (palette == w9968cf_formatlist[i].palette)
-			return palette;
-		i++;
-	}
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Return the depth corresponding to the given palette.
-  Palette _must_ be supported !
-  --------------------------------------------------------------------------*/
-static inline u16 w9968cf_valid_depth(u16 palette)
-{
-	u8 i=0;
-	while (w9968cf_formatlist[i].palette != palette)
-		i++;
-
-	return w9968cf_formatlist[i].depth;
-}
-
-
-/*--------------------------------------------------------------------------
-  Return non-zero if the format requires decompression, 0 otherwise.
-  --------------------------------------------------------------------------*/
-static inline u8 w9968cf_need_decompression(u16 palette)
-{
-	u8 i = 0;
-	while (w9968cf_formatlist[i].palette != 0) {
-		if (palette == w9968cf_formatlist[i].palette)
-			return w9968cf_formatlist[i].compression;
-		i++;
-	}
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Change the picture settings of the camera.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int
-w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict)
-{
-	u16 fmt, hw_depth, hw_palette, reg_v = 0x0000;
-	int err = 0;
-
-	/* Make sure we are using a valid depth */
-	pict.depth = w9968cf_valid_depth(pict.palette);
-
-	fmt = pict.palette;
-
-	hw_depth = pict.depth; /* depth used by the winbond chip */
-	hw_palette = pict.palette; /* palette used by the winbond chip */
-
-	/* VS & HS polarities */
-	reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11);
-
-	switch (fmt)
-	{
-		case VIDEO_PALETTE_UYVY:
-			reg_v |= 0x0000;
-			cam->vpp_flag = VPP_NONE;
-			break;
-		case VIDEO_PALETTE_YUV422P:
-			reg_v |= 0x0002;
-			cam->vpp_flag = VPP_DECOMPRESSION;
-			break;
-		case VIDEO_PALETTE_YUV420:
-		case VIDEO_PALETTE_YUV420P:
-			reg_v |= 0x0003;
-			cam->vpp_flag = VPP_DECOMPRESSION;
-			break;
-		case VIDEO_PALETTE_YUYV:
-		case VIDEO_PALETTE_YUV422:
-			reg_v |= 0x0000;
-			cam->vpp_flag = VPP_SWAP_YUV_BYTES;
-			hw_palette = VIDEO_PALETTE_UYVY;
-			break;
-		/* Original video is used instead of RGBX palettes.
-		   Software conversion later. */
-		case VIDEO_PALETTE_GREY:
-		case VIDEO_PALETTE_RGB555:
-		case VIDEO_PALETTE_RGB565:
-		case VIDEO_PALETTE_RGB24:
-		case VIDEO_PALETTE_RGB32:
-			reg_v |= 0x0000; /* UYVY 16 bit is used */
-			hw_depth = 16;
-			hw_palette = VIDEO_PALETTE_UYVY;
-			cam->vpp_flag = VPP_UYVY_TO_RGBX;
-			break;
-	}
-
-	/* NOTE: due to memory issues, it is better to disable the hardware
-		 double buffering during compression */
-	if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
-		reg_v |= 0x0080;
-
-	if (cam->clamping)
-		reg_v |= 0x0020;
-
-	if (cam->filter_type == 1)
-		reg_v |= 0x0008;
-	else if (cam->filter_type == 2)
-		reg_v |= 0x000c;
-
-	if ((err = w9968cf_write_reg(cam, reg_v, 0x16)))
-		goto error;
-
-	if ((err = w9968cf_sensor_update_picture(cam, pict)))
-		goto error;
-
-	/* If all went well, update the device data structure */
-	memcpy(&cam->picture, &pict, sizeof(pict));
-	cam->hw_depth = hw_depth;
-	cam->hw_palette = hw_palette;
-
-	/* Settings changed, so we clear the frame buffers */
-	memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
-
-	DBG(4, "Palette is %s, depth is %u bpp",
-	    symbolic(v4l1_plist, pict.palette), pict.depth)
-
-	return 0;
-
-error:
-	DBG(1, "Failed to change picture settings")
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Change the capture area size of the camera.
-  This function _must_ be called _after_ w9968cf_set_picture().
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int
-w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
-{
-	u16 x, y, w, h, scx, scy, cw, ch, ax, ay;
-	unsigned long fw, fh;
-	struct ovcamchip_window s_win;
-	int err = 0;
-
-	/* Work around to avoid FP arithmetics */
-	#define SC(x) ((x) << 10)
-	#define UNSC(x) ((x) >> 10)
-
-	/* Make sure we are using a supported resolution */
-	if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height)))
-		goto error;
-
-	/* Scaling factors */
-	fw = SC(win.width) / cam->maxwidth;
-	fh = SC(win.height) / cam->maxheight;
-
-	/* Set up the width and height values used by the chip */
-	if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
-		cam->vpp_flag |= VPP_UPSCALE;
-		/* Calculate largest w,h mantaining the same w/h ratio */
-		w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
-		h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
-		if (w < cam->minwidth) /* just in case */
-			w = cam->minwidth;
-		if (h < cam->minheight) /* just in case */
-			h = cam->minheight;
-	} else {
-		cam->vpp_flag &= ~VPP_UPSCALE;
-		w = win.width;
-		h = win.height;
-	}
-
-	/* x,y offsets of the cropped area */
-	scx = cam->start_cropx;
-	scy = cam->start_cropy;
-
-	/* Calculate cropped area manteining the right w/h ratio */
-	if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
-		cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
-		ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
-	} else {
-		cw = w;
-		ch = h;
-	}
-
-	/* Setup the window of the sensor */
-	s_win.format = VIDEO_PALETTE_UYVY;
-	s_win.width = cam->maxwidth;
-	s_win.height = cam->maxheight;
-	s_win.quarter = 0; /* full progressive video */
-
-	/* Center it */
-	s_win.x = (s_win.width - cw) / 2;
-	s_win.y = (s_win.height - ch) / 2;
-
-	/* Clock divisor */
-	if (cam->clockdiv >= 0)
-		s_win.clockdiv = cam->clockdiv; /* manual override */
-	else
-		switch (cam->sensor) {
-			case CC_OV6620:
-				s_win.clockdiv = 0;
-				break;
-			case CC_OV6630:
-				s_win.clockdiv = 0;
-				break;
-			case CC_OV76BE:
-			case CC_OV7610:
-			case CC_OV7620:
-				s_win.clockdiv = 0;
-				break;
-			default:
-				s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR;
-		}
-
-	/* We have to scale win.x and win.y offsets */
-	if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
-	     || (cam->vpp_flag & VPP_UPSCALE) ) {
-		ax = SC(win.x)/fw;
-		ay = SC(win.y)/fh;
-	} else {
-		ax = win.x;
-		ay = win.y;
-	}
-
-	if ((ax + cw) > cam->maxwidth)
-		ax = cam->maxwidth - cw;
-
-	if ((ay + ch) > cam->maxheight)
-		ay = cam->maxheight - ch;
-
-	/* Adjust win.x, win.y */
-	if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
-	     || (cam->vpp_flag & VPP_UPSCALE) ) {
-		win.x = UNSC(ax*fw);
-		win.y = UNSC(ay*fh);
-	} else {
-		win.x = ax;
-		win.y = ay;
-	}
-
-	/* Offsets used by the chip */
-	x = ax + s_win.x;
-	y = ay + s_win.y;
-
-	/* Go ! */
-	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win)))
-		goto error;
-
-	err += w9968cf_write_reg(cam, scx + x, 0x10);
-	err += w9968cf_write_reg(cam, scy + y, 0x11);
-	err += w9968cf_write_reg(cam, scx + x + cw, 0x12);
-	err += w9968cf_write_reg(cam, scy + y + ch, 0x13);
-	err += w9968cf_write_reg(cam, w, 0x14);
-	err += w9968cf_write_reg(cam, h, 0x15);
-
-	/* JPEG width & height */
-	err += w9968cf_write_reg(cam, w, 0x30);
-	err += w9968cf_write_reg(cam, h, 0x31);
-
-	/* Y & UV frame buffer strides (in WORD) */
-	if (cam->vpp_flag & VPP_DECOMPRESSION) {
-		err += w9968cf_write_reg(cam, w/2, 0x2c);
-		err += w9968cf_write_reg(cam, w/4, 0x2d);
-	} else
-		err += w9968cf_write_reg(cam, w, 0x2c);
-
-	if (err)
-		goto error;
-
-	/* If all went well, update the device data structure */
-	memcpy(&cam->window, &win, sizeof(win));
-	cam->hw_width = w;
-	cam->hw_height = h;
-
-	/* Settings changed, so we clear the frame buffers */
-	memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
-
-	DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
-	    win.width, win.height, win.x, win.y)
-
-	PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
-	      "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u",
-	      x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y,
-	      win.width, win.height)
-
-	return 0;
-
-error:
-	DBG(1, "Failed to change the capture area size")
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Adjust the asked values for window width and height.
-  Return 0 on success, -1 otherwise.
-  --------------------------------------------------------------------------*/
-static int
-w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height)
-{
-	unsigned int maxw, maxh, align;
-
-	maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
-	       w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
-			   : cam->maxwidth;
-	maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
-	       w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
-			   : cam->maxheight;
-	align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0;
-
-	v4l_bound_align_image(width, cam->minwidth, maxw, align,
-			      height, cam->minheight, maxh, align, 0);
-
-	PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
-
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Initialize the FIFO list of requested frames.
-  --------------------------------------------------------------------------*/
-static void w9968cf_init_framelist(struct w9968cf_device* cam)
-{
-	u8 i;
-
-	for (i = 0; i < cam->nbuffers; i++) {
-		cam->requested_frame[i] = NULL;
-		cam->frame[i].queued = 0;
-		cam->frame[i].status = F_UNUSED;
-	}
-}
-
-
-/*--------------------------------------------------------------------------
-  Add a frame in the FIFO list of requested frames.
-  This function is called in process context.
-  --------------------------------------------------------------------------*/
-static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num)
-{
-	u8 f;
-	unsigned long lock_flags;
-
-	spin_lock_irqsave(&cam->flist_lock, lock_flags);
-
-	for (f=0; cam->requested_frame[f] != NULL; f++);
-	cam->requested_frame[f] = &cam->frame[f_num];
-	cam->frame[f_num].queued = 1;
-	cam->frame[f_num].status = F_UNUSED; /* clear the status */
-
-	spin_unlock_irqrestore(&cam->flist_lock, lock_flags);
-
-	DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f)
-}
-
-
-/*--------------------------------------------------------------------------
-  Read, store and remove the first pointer in the FIFO list of requested
-  frames. This function is called in interrupt context.
-  --------------------------------------------------------------------------*/
-static void
-w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
-{
-	u8 i;
-
-	spin_lock(&cam->flist_lock);
-
-	*framep = cam->requested_frame[0];
-
-	/* Shift the list of pointers */
-	for (i = 0; i < cam->nbuffers-1; i++)
-		cam->requested_frame[i] = cam->requested_frame[i+1];
-	cam->requested_frame[i] = NULL;
-
-	spin_unlock(&cam->flist_lock);
-
-	DBG(6,"Popped frame #%d from the list", (*framep)->number)
-}
-
-
-/*--------------------------------------------------------------------------
-  High-level video post-processing routine on grabbed frames.
-  Return 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int
-w9968cf_postprocess_frame(struct w9968cf_device* cam,
-			  struct w9968cf_frame_t* fr)
-{
-	void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
-	u16 w = cam->window.width,
-	    h = cam->window.height,
-	    d = cam->picture.depth,
-	    fmt = cam->picture.palette,
-	    rgb = cam->force_rgb,
-	    hw_w = cam->hw_width,
-	    hw_h = cam->hw_height,
-	    hw_d = cam->hw_depth;
-	int err = 0;
-
-	#define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;}
-
-	if (cam->vpp_flag & VPP_DECOMPRESSION) {
-		memcpy(pOut, pIn, fr->length);
-		_PSWAP(pIn, pOut)
-		err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut);
-		PDBGG("Compressed frame length: %lu",(unsigned long)fr->length)
-		fr->length = (hw_w*hw_h*hw_d)/8;
-		_PSWAP(pIn, pOut)
-		if (err) {
-			DBG(4, "An error occurred while decoding the frame: "
-			       "%s", symbolic(decoder_errlist, err))
-			return err;
-		} else
-			DBG(6, "Frame decoded")
-	}
-
-	if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) {
-		w9968cf_vpp->swap_yuvbytes(pIn, fr->length);
-		DBG(6, "Original UYVY component ordering changed")
-	}
-
-	if (cam->vpp_flag & VPP_UPSCALE) {
-		w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h);
-		fr->length = (w*h*hw_d)/8;
-		_PSWAP(pIn, pOut)
-		DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u",
-		    hw_w, hw_h, hw_d, w, h)
-	}
-
-	if (cam->vpp_flag & VPP_UYVY_TO_RGBX) {
-		w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
-		fr->length = (w*h*d)/8;
-		_PSWAP(pIn, pOut)
-		DBG(6, "UYVY-16bit to %s conversion done",
-		    symbolic(v4l1_plist, fmt))
-	}
-
-	if (pOut == fr->buffer)
-		memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length);
-
-	return 0;
-}
-
-
-
-/****************************************************************************
- * Image sensor control routines                                            *
- ****************************************************************************/
-
-static int
-w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
-{
-	struct ovcamchip_control ctl;
-	int err;
-
-	ctl.id = cid;
-	ctl.value = val;
-
-	err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl);
-
-	return err;
-}
-
-
-static int
-w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
-{
-	struct ovcamchip_control ctl;
-	int err;
-
-	ctl.id = cid;
-
-	err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl);
-	if (!err)
-		*val = ctl.value;
-
-	return err;
-}
-
-
-static int
-w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
-{
-	int rc;
-
-	rc = v4l2_subdev_call(cam->sensor_sd, core, ioctl, cmd, arg);
-	/* The I2C driver returns -EPERM on non-supported controls */
-	return (rc < 0 && rc != -EPERM) ? rc : 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Update some settings of the image sensor.
-  Returns: 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_sensor_update_settings(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	/* Auto brightness */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
-					 cam->auto_brt);
-	if (err)
-		return err;
-
-	/* Auto exposure */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
-					 cam->auto_exp);
-	if (err)
-		return err;
-
-	/* Banding filter */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
-					 cam->bandfilt);
-	if (err)
-		return err;
-
-	/* Light frequency */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
-					 cam->lightfreq);
-	if (err)
-		return err;
-
-	/* Back light */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
-					 cam->backlight);
-	if (err)
-		return err;
-
-	/* Mirror */
-	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
-					 cam->mirror);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Get some current picture settings from the image sensor and update the
-  internal 'picture' structure of the camera.
-  Returns: 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_sensor_get_picture(struct w9968cf_device* cam)
-{
-	int err, v;
-
-	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v);
-	if (err)
-		return err;
-	cam->picture.contrast = v;
-
-	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v);
-	if (err)
-		return err;
-	cam->picture.brightness = v;
-
-	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v);
-	if (err)
-		return err;
-	cam->picture.colour = v;
-
-	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v);
-	if (err)
-		return err;
-	cam->picture.hue = v;
-
-	DBG(5, "Got picture settings from the image sensor")
-
-	PDBGG("Brightness, contrast, hue, colour, whiteness are "
-	      "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast,
-	      cam->picture.hue, cam->picture.colour, cam->picture.whiteness)
-
-	return 0;
-}
-
-
-/*--------------------------------------------------------------------------
-  Update picture settings of the image sensor.
-  Returns: 0 on success, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int
-w9968cf_sensor_update_picture(struct w9968cf_device* cam,
-			      struct video_picture pict)
-{
-	int err = 0;
-
-	if ((!cam->sensor_initialized)
-	    || pict.contrast != cam->picture.contrast) {
-		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
-						 pict.contrast);
-		if (err)
-			goto fail;
-		DBG(4, "Contrast changed from %u to %u",
-		    cam->picture.contrast, pict.contrast)
-		cam->picture.contrast = pict.contrast;
-	}
-
-	if (((!cam->sensor_initialized) ||
-	    pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
-		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
-						 pict.brightness);
-		if (err)
-			goto fail;
-		DBG(4, "Brightness changed from %u to %u",
-		    cam->picture.brightness, pict.brightness)
-		cam->picture.brightness = pict.brightness;
-	}
-
-	if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
-		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
-						 pict.colour);
-		if (err)
-			goto fail;
-		DBG(4, "Colour changed from %u to %u",
-		    cam->picture.colour, pict.colour)
-		cam->picture.colour = pict.colour;
-	}
-
-	if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
-		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
-						 pict.hue);
-		if (err)
-			goto fail;
-		DBG(4, "Hue changed from %u to %u",
-		    cam->picture.hue, pict.hue)
-		cam->picture.hue = pict.hue;
-	}
-
-	return 0;
-
-fail:
-	DBG(4, "Failed to change sensor picture setting")
-	return err;
-}
-
-
-
-/****************************************************************************
- * Camera configuration                                                     *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
-  This function is called when a supported image sensor is detected.
-  Return 0 if the initialization succeeds, a negative number otherwise.
-  --------------------------------------------------------------------------*/
-static int w9968cf_sensor_init(struct w9968cf_device* cam)
-{
-	int err = 0;
-
-	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
-				      &cam->monochrome)))
-		goto error;
-
-	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
-				      &cam->sensor)))
-		goto error;
-
-	/* NOTE: Make sure width and height are a multiple of 16 */
-	switch (v4l2_i2c_subdev_addr(cam->sensor_sd)) {
-		case OV6xx0_SID:
-			cam->maxwidth = 352;
-			cam->maxheight = 288;
-			cam->minwidth = 64;
-			cam->minheight = 48;
-			break;
-		case OV7xx0_SID:
-			cam->maxwidth = 640;
-			cam->maxheight = 480;
-			cam->minwidth = 64;
-			cam->minheight = 48;
-			break;
-		default:
-			DBG(1, "Not supported image sensor detected for %s",
-			    symbolic(camlist, cam->id))
-			return -EINVAL;
-	}
-
-	/* These values depend on the ones in the ovxxx0.c sources */
-	switch (cam->sensor) {
-		case CC_OV7620:
-			cam->start_cropx = 287;
-			cam->start_cropy = 35;
-			/* Seems to work around a bug in the image sensor */
-			cam->vs_polarity = 1;
-			cam->hs_polarity = 1;
-			break;
-		default:
-			cam->start_cropx = 320;
-			cam->start_cropy = 35;
-			cam->vs_polarity = 1;
-			cam->hs_polarity = 0;
-	}
-
-	if ((err = w9968cf_sensor_update_settings(cam)))
-		goto error;
-
-	if ((err = w9968cf_sensor_update_picture(cam, cam->picture)))
-		goto error;
-
-	cam->sensor_initialized = 1;
-
-	DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor))
-	return 0;
-
-error:
-	cam->sensor_initialized = 0;
-	cam->sensor = CC_UNKNOWN;
-	DBG(1, "Image sensor initialization failed for %s (%s). "
-	       "Try to detach and attach this device again",
-	    symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
-	return err;
-}
-
-
-/*--------------------------------------------------------------------------
-  Fill some basic fields in the main device data structure.
-  This function is called once on w9968cf_usb_probe() for each recognized
-  camera.
-  --------------------------------------------------------------------------*/
-static void
-w9968cf_configure_camera(struct w9968cf_device* cam,
-			 struct usb_device* udev,
-			 enum w9968cf_model_id mod_id,
-			 const unsigned short dev_nr)
-{
-	mutex_init(&cam->fileop_mutex);
-	init_waitqueue_head(&cam->open);
-	spin_lock_init(&cam->urb_lock);
-	spin_lock_init(&cam->flist_lock);
-
-	cam->users = 0;
-	cam->disconnected = 0;
-	cam->id = mod_id;
-	cam->sensor = CC_UNKNOWN;
-	cam->sensor_initialized = 0;
-
-	/* Calculate the alternate setting number (from 1 to 16)
-	   according to the 'packet_size' module parameter */
-	if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE)
-		packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE;
-	for (cam->altsetting = 1;
-	     packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
-	     cam->altsetting++);
-
-	cam->max_buffers = (max_buffers[dev_nr] < 2 ||
-			    max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
-			   ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
-
-	cam->double_buffer = (double_buffer[dev_nr] == 0 ||
-			      double_buffer[dev_nr] == 1)
-			     ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
-
-	cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
-			? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
-
-	cam->filter_type = (filter_type[dev_nr] == 0 ||
-			    filter_type[dev_nr] == 1 ||
-			    filter_type[dev_nr] == 2)
-			   ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
-
-	cam->capture = 1;
-
-	cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
-			 ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
-
-	cam->decompression = (decompression[dev_nr] == 0 ||
-			      decompression[dev_nr] == 1 ||
-			      decompression[dev_nr] == 2)
-			     ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
-
-	cam->upscaling = (upscaling[dev_nr] == 0 ||
-			  upscaling[dev_nr] == 1)
-			 ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
-
-	cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
-			? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
-
-	cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
-			? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
-
-	cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
-			 ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
-
-	cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
-			 bandingfilter[dev_nr] == 1)
-			? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
-
-	cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
-			 ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
-
-	cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
-			? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
-
-	cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
-		      ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
-
-	cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
-			  ? monochrome[dev_nr] : W9968CF_MONOCHROME;
-
-	cam->picture.brightness = (u16)brightness[dev_nr];
-	cam->picture.hue = (u16)hue[dev_nr];
-	cam->picture.colour = (u16)colour[dev_nr];
-	cam->picture.contrast = (u16)contrast[dev_nr];
-	cam->picture.whiteness = (u16)whiteness[dev_nr];
-	if (w9968cf_valid_palette((u16)force_palette[dev_nr])) {
-		cam->picture.palette = (u16)force_palette[dev_nr];
-		cam->force_palette = 1;
-	} else {
-		cam->force_palette = 0;
-		if (cam->decompression == 0)
-			cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF;
-		else if (cam->decompression == 1)
-			cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE;
-		else
-			cam->picture.palette = W9968CF_PALETTE_DECOMP_ON;
-	}
-	cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
-
-	cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
-			 ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
-
-	cam->window.x = 0;
-	cam->window.y = 0;
-	cam->window.width = W9968CF_WIDTH;
-	cam->window.height = W9968CF_HEIGHT;
-	cam->window.chromakey = 0;
-	cam->window.clipcount = 0;
-	cam->window.flags = 0;
-
-	DBG(3, "%s configured with settings #%u:",
-	    symbolic(camlist, cam->id), dev_nr)
-
-	DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
-	    wMaxPacketSize[cam->altsetting-1])
-
-	DBG(3, "- Number of requested video frame buffers: %u",
-	    cam->max_buffers)
-
-	if (cam->double_buffer)
-		DBG(3, "- Hardware double buffering enabled")
-	else
-		DBG(3, "- Hardware double buffering disabled")
-
-	if (cam->filter_type == 0)
-		DBG(3, "- Video filtering disabled")
-	else if (cam->filter_type == 1)
-		DBG(3, "- Video filtering enabled: type 1-2-1")
-	else if (cam->filter_type == 2)
-		DBG(3, "- Video filtering enabled: type 2-3-6-3-2")
-
-	if (cam->clamping)
-		DBG(3, "- Video data clamping (CCIR-601 format) enabled")
-	else
-		DBG(3, "- Video data clamping (CCIR-601 format) disabled")
-
-	if (cam->largeview)
-		DBG(3, "- Large view enabled")
-	else
-		DBG(3, "- Large view disabled")
-
-	if ((cam->decompression) == 0 && (!cam->force_palette))
-		DBG(3, "- Decompression disabled")
-	else if ((cam->decompression) == 1 && (!cam->force_palette))
-		DBG(3, "- Decompression forced")
-	else if ((cam->decompression) == 2 && (!cam->force_palette))
-		DBG(3, "- Decompression allowed")
-
-	if (cam->upscaling)
-		DBG(3, "- Software image scaling enabled")
-	else
-		DBG(3, "- Software image scaling disabled")
-
-	if (cam->force_palette)
-		DBG(3, "- Image palette forced to %s",
-		    symbolic(v4l1_plist, cam->picture.palette))
-
-	if (cam->force_rgb)
-		DBG(3, "- RGB component ordering will be used instead of BGR")
-
-	if (cam->auto_brt)
-		DBG(3, "- Auto brightness enabled")
-	else
-		DBG(3, "- Auto brightness disabled")
-
-	if (cam->auto_exp)
-		DBG(3, "- Auto exposure enabled")
-	else
-		DBG(3, "- Auto exposure disabled")
-
-	if (cam->backlight)
-		DBG(3, "- Backlight exposure algorithm enabled")
-	else
-		DBG(3, "- Backlight exposure algorithm disabled")
-
-	if (cam->mirror)
-		DBG(3, "- Mirror enabled")
-	else
-		DBG(3, "- Mirror disabled")
-
-	if (cam->bandfilt)
-		DBG(3, "- Banding filter enabled")
-	else
-		DBG(3, "- Banding filter disabled")
-
-	DBG(3, "- Power lighting frequency: %u", cam->lightfreq)
-
-	if (cam->clockdiv == -1)
-		DBG(3, "- Automatic clock divisor enabled")
-	else
-		DBG(3, "- Clock divisor: %d", cam->clockdiv)
-
-	if (cam->monochrome)
-		DBG(3, "- Image sensor used as monochrome")
-	else
-		DBG(3, "- Image sensor not used as monochrome")
-}
-
-
-/*--------------------------------------------------------------------------
-  If the video post-processing module is not loaded, some parameters
-  must be overridden.
-  --------------------------------------------------------------------------*/
-static void w9968cf_adjust_configuration(struct w9968cf_device* cam)
-{
-	if (!w9968cf_vpp) {
-		if (cam->decompression == 1) {
-			cam->decompression = 2;
-			DBG(2, "Video post-processing module not found: "
-			       "'decompression' parameter forced to 2")
-		}
-		if (cam->upscaling) {
-			cam->upscaling = 0;
-			DBG(2, "Video post-processing module not found: "
-			       "'upscaling' parameter forced to 0")
-		}
-		if (cam->picture.palette != VIDEO_PALETTE_UYVY) {
-			cam->force_palette = 0;
-			DBG(2, "Video post-processing module not found: "
-			       "'force_palette' parameter forced to 0")
-		}
-		cam->picture.palette = VIDEO_PALETTE_UYVY;
-		cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
-	}
-}
-
-
-/*--------------------------------------------------------------------------
-  Release the resources used by the driver.
-  This function is called on disconnect
-  (or on close if deallocation has been deferred)
-  --------------------------------------------------------------------------*/
-static void w9968cf_release_resources(struct w9968cf_device* cam)
-{
-	mutex_lock(&w9968cf_devlist_mutex);
-
-	DBG(2, "V4L device deregistered: %s",
-	    video_device_node_name(cam->v4ldev))
-
-	video_unregister_device(cam->v4ldev);
-	list_del(&cam->v4llist);
-	i2c_del_adapter(&cam->i2c_adapter);
-	w9968cf_deallocate_memory(cam);
-	kfree(cam->control_buffer);
-	kfree(cam->data_buffer);
-	v4l2_device_unregister(&cam->v4l2_dev);
-
-	mutex_unlock(&w9968cf_devlist_mutex);
-}
-
-
-
-/****************************************************************************
- * Video4Linux interface                                                    *
- ****************************************************************************/
-
-static int w9968cf_open(struct file *filp)
-{
-	struct w9968cf_device* cam;
-	int err;
-
-	/* This the only safe way to prevent race conditions with disconnect */
-	if (!down_read_trylock(&w9968cf_disconnect))
-		return -EAGAIN;
-
-	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
-	mutex_lock(&cam->dev_mutex);
-
-	if (cam->sensor == CC_UNKNOWN) {
-		DBG(2, "No supported image sensor has been detected by the "
-		       "'ovcamchip' module for the %s (%s). Make sure "
-		       "it is loaded *before* (re)connecting the camera.",
-		    symbolic(camlist, cam->id),
-		    video_device_node_name(cam->v4ldev))
-		mutex_unlock(&cam->dev_mutex);
-		up_read(&w9968cf_disconnect);
-		return -ENODEV;
-	}
-
-	if (cam->users) {
-		DBG(2, "%s (%s) has been already occupied by '%s'",
-		    symbolic(camlist, cam->id),
-		    video_device_node_name(cam->v4ldev), cam->command)
-		if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
-			mutex_unlock(&cam->dev_mutex);
-			up_read(&w9968cf_disconnect);
-			return -EWOULDBLOCK;
-		}
-		mutex_unlock(&cam->dev_mutex);
-		err = wait_event_interruptible_exclusive(cam->open,
-							 cam->disconnected ||
-							 !cam->users);
-		if (err) {
-			up_read(&w9968cf_disconnect);
-			return err;
-		}
-		if (cam->disconnected) {
-			up_read(&w9968cf_disconnect);
-			return -ENODEV;
-		}
-		mutex_lock(&cam->dev_mutex);
-	}
-
-	DBG(5, "Opening '%s', %s ...",
-	    symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
-
-	cam->streaming = 0;
-	cam->misconfigured = 0;
-
-	w9968cf_adjust_configuration(cam);
-
-	if ((err = w9968cf_allocate_memory(cam)))
-		goto deallocate_memory;
-
-	if ((err = w9968cf_init_chip(cam)))
-		goto deallocate_memory;
-
-	if ((err = w9968cf_start_transfer(cam)))
-		goto deallocate_memory;
-
-	filp->private_data = cam;
-
-	cam->users++;
-	strcpy(cam->command, current->comm);
-
-	init_waitqueue_head(&cam->wait_queue);
-
-	DBG(5, "Video device is open")
-
-	mutex_unlock(&cam->dev_mutex);
-	up_read(&w9968cf_disconnect);
-
-	return 0;
-
-deallocate_memory:
-	w9968cf_deallocate_memory(cam);
-	DBG(2, "Failed to open the video device")
-	mutex_unlock(&cam->dev_mutex);
-	up_read(&w9968cf_disconnect);
-	return err;
-}
-
-
-static int w9968cf_release(struct file *filp)
-{
-	struct w9968cf_device* cam;
-
-	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
-	mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
-
-	w9968cf_stop_transfer(cam);
-
-	if (cam->disconnected) {
-		w9968cf_release_resources(cam);
-		mutex_unlock(&cam->dev_mutex);
-		kfree(cam);
-		return 0;
-	}
-
-	cam->users--;
-	w9968cf_deallocate_memory(cam);
-	wake_up_interruptible_nr(&cam->open, 1);
-
-	DBG(5, "Video device closed")
-	mutex_unlock(&cam->dev_mutex);
-	return 0;
-}
-
-
-static ssize_t
-w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
-{
-	struct w9968cf_device* cam;
-	struct w9968cf_frame_t* fr;
-	int err = 0;
-
-	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
-	if (filp->f_flags & O_NONBLOCK)
-		return -EWOULDBLOCK;
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return -ERESTARTSYS;
-
-	if (cam->disconnected) {
-		DBG(2, "Device not present")
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	if (cam->misconfigured) {
-		DBG(2, "The camera is misconfigured. Close and open it again.")
-		mutex_unlock(&cam->fileop_mutex);
-		return -EIO;
-	}
-
-	if (!cam->frame[0].queued)
-		w9968cf_push_frame(cam, 0);
-
-	if (!cam->frame[1].queued)
-		w9968cf_push_frame(cam, 1);
-
-	err = wait_event_interruptible(cam->wait_queue,
-				       cam->frame[0].status == F_READY ||
-				       cam->frame[1].status == F_READY ||
-				       cam->disconnected);
-	if (err) {
-		mutex_unlock(&cam->fileop_mutex);
-		return err;
-	}
-	if (cam->disconnected) {
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1];
-
-	if (w9968cf_vpp)
-		w9968cf_postprocess_frame(cam, fr);
-
-	if (count > fr->length)
-		count = fr->length;
-
-	if (copy_to_user(buf, fr->buffer, count)) {
-		fr->status = F_UNUSED;
-		mutex_unlock(&cam->fileop_mutex);
-		return -EFAULT;
-	}
-	*f_pos += count;
-
-	fr->status = F_UNUSED;
-
-	DBG(5, "%zu bytes read", count)
-
-	mutex_unlock(&cam->fileop_mutex);
-	return count;
-}
-
-
-static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
-{
-	struct w9968cf_device* cam = (struct w9968cf_device*)
-				     video_get_drvdata(video_devdata(filp));
-	unsigned long vsize = vma->vm_end - vma->vm_start,
-		      psize = cam->nbuffers * cam->frame[0].size,
-		      start = vma->vm_start,
-		      pos = (unsigned long)cam->frame[0].buffer,
-		      page;
-
-	if (cam->disconnected) {
-		DBG(2, "Device not present")
-		return -ENODEV;
-	}
-
-	if (cam->misconfigured) {
-		DBG(2, "The camera is misconfigured. Close and open it again")
-		return -EIO;
-	}
-
-	PDBGG("mmapping %lu bytes...", vsize)
-
-	if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT))
-		return -EINVAL;
-
-	while (vsize > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page + vma->vm_pgoff,
-						PAGE_SIZE, vma->vm_page_prot))
-			return -EAGAIN;
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		vsize -= PAGE_SIZE;
-	}
-
-	DBG(5, "mmap method successfully called")
-	return 0;
-}
-
-
-static long
-w9968cf_ioctl(struct file *filp,
-	      unsigned int cmd, unsigned long arg)
-{
-	struct w9968cf_device* cam;
-	long err;
-
-	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return -ERESTARTSYS;
-
-	if (cam->disconnected) {
-		DBG(2, "Device not present")
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	if (cam->misconfigured) {
-		DBG(2, "The camera is misconfigured. Close and open it again.")
-		mutex_unlock(&cam->fileop_mutex);
-		return -EIO;
-	}
-
-	err = w9968cf_v4l_ioctl(filp, cmd, (void __user *)arg);
-
-	mutex_unlock(&cam->fileop_mutex);
-	return err;
-}
-
-
-static long w9968cf_v4l_ioctl(struct file *filp,
-			     unsigned int cmd, void __user *arg)
-{
-	struct w9968cf_device* cam;
-	const char* v4l1_ioctls[] = {
-		"?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
-		"GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
-		"SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
-		"SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
-		"SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
-		"GVBIFMT", "SVBIFMT"
-	};
-
-	#define V4L1_IOCTL(cmd) \
-		((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
-		v4l1_ioctls[_IOC_NR((cmd))] : "?")
-
-	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
-	switch (cmd) {
-
-	case VIDIOCGCAP: /* get video capability */
-	{
-		struct video_capability cap = {
-			.type = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
-			.channels = 1,
-			.audios = 0,
-			.minwidth = cam->minwidth,
-			.minheight = cam->minheight,
-		};
-		sprintf(cap.name, "W996[87]CF USB Camera");
-		cap.maxwidth = (cam->upscaling && w9968cf_vpp)
-			       ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
-				 : cam->maxwidth;
-		cap.maxheight = (cam->upscaling && w9968cf_vpp)
-				? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
-				  : cam->maxheight;
-
-		if (copy_to_user(arg, &cap, sizeof(cap)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGCAP successfully called")
-		return 0;
-	}
-
-	case VIDIOCGCHAN: /* get video channel informations */
-	{
-		struct video_channel chan;
-		if (copy_from_user(&chan, arg, sizeof(chan)))
-			return -EFAULT;
-
-		if (chan.channel != 0)
-			return -EINVAL;
-
-		strcpy(chan.name, "Camera");
-		chan.tuners = 0;
-		chan.flags = 0;
-		chan.type = VIDEO_TYPE_CAMERA;
-		chan.norm = VIDEO_MODE_AUTO;
-
-		if (copy_to_user(arg, &chan, sizeof(chan)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGCHAN successfully called")
-		return 0;
-	}
-
-	case VIDIOCSCHAN: /* set active channel */
-	{
-		struct video_channel chan;
-
-		if (copy_from_user(&chan, arg, sizeof(chan)))
-			return -EFAULT;
-
-		if (chan.channel != 0)
-			return -EINVAL;
-
-		DBG(5, "VIDIOCSCHAN successfully called")
-		return 0;
-	}
-
-	case VIDIOCGPICT: /* get image properties of the picture */
-	{
-		if (w9968cf_sensor_get_picture(cam))
-			return -EIO;
-
-		if (copy_to_user(arg, &cam->picture, sizeof(cam->picture)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGPICT successfully called")
-		return 0;
-	}
-
-	case VIDIOCSPICT: /* change picture settings */
-	{
-		struct video_picture pict;
-		int err = 0;
-
-		if (copy_from_user(&pict, arg, sizeof(pict)))
-			return -EFAULT;
-
-		if ( (cam->force_palette || !w9968cf_vpp)
-		     && pict.palette != cam->picture.palette ) {
-			DBG(4, "Palette %s rejected: only %s is allowed",
-			    symbolic(v4l1_plist, pict.palette),
-			    symbolic(v4l1_plist, cam->picture.palette))
-			return -EINVAL;
-		}
-
-		if (!w9968cf_valid_palette(pict.palette)) {
-			DBG(4, "Palette %s not supported. VIDIOCSPICT failed",
-			    symbolic(v4l1_plist, pict.palette))
-			return -EINVAL;
-		}
-
-		if (!cam->force_palette) {
-		   if (cam->decompression == 0) {
-		      if (w9968cf_need_decompression(pict.palette)) {
-			 DBG(4, "Decompression disabled: palette %s is not "
-				"allowed. VIDIOCSPICT failed",
-			     symbolic(v4l1_plist, pict.palette))
-			 return -EINVAL;
-		      }
-		   } else if (cam->decompression == 1) {
-		      if (!w9968cf_need_decompression(pict.palette)) {
-			 DBG(4, "Decompression forced: palette %s is not "
-				"allowed. VIDIOCSPICT failed",
-			     symbolic(v4l1_plist, pict.palette))
-			 return -EINVAL;
-		      }
-		   }
-		}
-
-		if (pict.depth != w9968cf_valid_depth(pict.palette)) {
-			DBG(4, "Requested depth %u bpp is not valid for %s "
-			       "palette: ignored and changed to %u bpp",
-			    pict.depth, symbolic(v4l1_plist, pict.palette),
-			    w9968cf_valid_depth(pict.palette))
-			pict.depth = w9968cf_valid_depth(pict.palette);
-		}
-
-		if (pict.palette != cam->picture.palette) {
-			if(*cam->requested_frame
-			   || cam->frame_current->queued) {
-				err = wait_event_interruptible
-				      ( cam->wait_queue,
-					cam->disconnected ||
-					(!*cam->requested_frame &&
-					 !cam->frame_current->queued) );
-				if (err)
-					return err;
-				if (cam->disconnected)
-					return -ENODEV;
-			}
-
-			if (w9968cf_stop_transfer(cam))
-				goto ioctl_fail;
-
-			if (w9968cf_set_picture(cam, pict))
-				goto ioctl_fail;
-
-			if (w9968cf_start_transfer(cam))
-				goto ioctl_fail;
-
-		} else if (w9968cf_sensor_update_picture(cam, pict))
-			return -EIO;
-
-
-		DBG(5, "VIDIOCSPICT successfully called")
-		return 0;
-	}
-
-	case VIDIOCSWIN: /* set capture area */
-	{
-		struct video_window win;
-		int err = 0;
-
-		if (copy_from_user(&win, arg, sizeof(win)))
-			return -EFAULT;
-
-		DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, "
-		       "x=%u, y=%u, %ux%u", win.clipcount, win.flags,
-		    win.x, win.y, win.width, win.height)
-
-		if (win.clipcount != 0 || win.flags != 0)
-			return -EINVAL;
-
-		if ((err = w9968cf_adjust_window_size(cam, &win.width,
-						      &win.height))) {
-			DBG(4, "Resolution not supported (%ux%u). "
-			       "VIDIOCSWIN failed", win.width, win.height)
-			return err;
-		}
-
-		if (win.x != cam->window.x ||
-		    win.y != cam->window.y ||
-		    win.width != cam->window.width ||
-		    win.height != cam->window.height) {
-			if(*cam->requested_frame
-			   || cam->frame_current->queued) {
-				err = wait_event_interruptible
-				      ( cam->wait_queue,
-					cam->disconnected ||
-					(!*cam->requested_frame &&
-					 !cam->frame_current->queued) );
-				if (err)
-					return err;
-				if (cam->disconnected)
-					return -ENODEV;
-			}
-
-			if (w9968cf_stop_transfer(cam))
-				goto ioctl_fail;
-
-			/* This _must_ be called before set_window() */
-			if (w9968cf_set_picture(cam, cam->picture))
-				goto ioctl_fail;
-
-			if (w9968cf_set_window(cam, win))
-				goto ioctl_fail;
-
-			if (w9968cf_start_transfer(cam))
-				goto ioctl_fail;
-		}
-
-		DBG(5, "VIDIOCSWIN successfully called. ")
-		return 0;
-	}
-
-	case VIDIOCGWIN: /* get current window properties */
-	{
-		if (copy_to_user(arg,&cam->window,sizeof(struct video_window)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGWIN successfully called")
-		return 0;
-	}
-
-	case VIDIOCGMBUF: /* request for memory (mapped) buffer */
-	{
-		struct video_mbuf mbuf;
-		u8 i;
-
-		mbuf.size = cam->nbuffers * cam->frame[0].size;
-		mbuf.frames = cam->nbuffers;
-		for (i = 0; i < cam->nbuffers; i++)
-			mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
-					  (unsigned long)cam->frame[0].buffer;
-
-		if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGMBUF successfully called")
-		return 0;
-	}
-
-	case VIDIOCMCAPTURE: /* start the capture to a frame */
-	{
-		struct video_mmap mmap;
-		struct w9968cf_frame_t* fr;
-		u32 w, h;
-		int err = 0;
-
-		if (copy_from_user(&mmap, arg, sizeof(mmap)))
-			return -EFAULT;
-
-		DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
-		    mmap.frame, symbolic(v4l1_plist, mmap.format),
-		    mmap.width, mmap.height)
-
-		if (mmap.frame >= cam->nbuffers) {
-			DBG(4, "Invalid frame number (%u). "
-			       "VIDIOCMCAPTURE failed", mmap.frame)
-			return -EINVAL;
-		}
-
-		if (mmap.format!=cam->picture.palette &&
-		    (cam->force_palette || !w9968cf_vpp)) {
-			DBG(4, "Palette %s rejected: only %s is allowed",
-			    symbolic(v4l1_plist, mmap.format),
-			    symbolic(v4l1_plist, cam->picture.palette))
-			return -EINVAL;
-		}
-
-		if (!w9968cf_valid_palette(mmap.format)) {
-			DBG(4, "Palette %s not supported. "
-			       "VIDIOCMCAPTURE failed",
-			    symbolic(v4l1_plist, mmap.format))
-			return -EINVAL;
-		}
-
-		if (!cam->force_palette) {
-		   if (cam->decompression == 0) {
-		      if (w9968cf_need_decompression(mmap.format)) {
-			 DBG(4, "Decompression disabled: palette %s is not "
-				"allowed. VIDIOCSPICT failed",
-			     symbolic(v4l1_plist, mmap.format))
-			 return -EINVAL;
-		      }
-		   } else if (cam->decompression == 1) {
-		      if (!w9968cf_need_decompression(mmap.format)) {
-			 DBG(4, "Decompression forced: palette %s is not "
-				"allowed. VIDIOCSPICT failed",
-			     symbolic(v4l1_plist, mmap.format))
-			 return -EINVAL;
-		      }
-		   }
-		}
-
-		w = mmap.width; h = mmap.height;
-		err = w9968cf_adjust_window_size(cam, &w, &h);
-		mmap.width = w; mmap.height = h;
-		if (err) {
-			DBG(4, "Resolution not supported (%dx%d). "
-			       "VIDIOCMCAPTURE failed",
-			    mmap.width, mmap.height)
-			return err;
-		}
-
-		fr = &cam->frame[mmap.frame];
-
-		if (mmap.width  != cam->window.width ||
-		    mmap.height != cam->window.height ||
-		    mmap.format != cam->picture.palette) {
-
-			struct video_window win;
-			struct video_picture pict;
-
-			if(*cam->requested_frame
-			   || cam->frame_current->queued) {
-				DBG(6, "VIDIOCMCAPTURE. Change settings for "
-				       "frame #%u: %dx%d, format %s. Wait...",
-				    mmap.frame, mmap.width, mmap.height,
-				    symbolic(v4l1_plist, mmap.format))
-				err = wait_event_interruptible
-				      ( cam->wait_queue,
-					cam->disconnected ||
-					(!*cam->requested_frame &&
-					 !cam->frame_current->queued) );
-				if (err)
-					return err;
-				if (cam->disconnected)
-					return -ENODEV;
-			}
-
-			memcpy(&win, &cam->window, sizeof(win));
-			memcpy(&pict, &cam->picture, sizeof(pict));
-			win.width = mmap.width;
-			win.height = mmap.height;
-			pict.palette = mmap.format;
-
-			if (w9968cf_stop_transfer(cam))
-				goto ioctl_fail;
-
-			/* This before set_window */
-			if (w9968cf_set_picture(cam, pict))
-				goto ioctl_fail;
-
-			if (w9968cf_set_window(cam, win))
-				goto ioctl_fail;
-
-			if (w9968cf_start_transfer(cam))
-				goto ioctl_fail;
-
-		} else 	if (fr->queued) {
-
-			DBG(6, "Wait until frame #%u is free", mmap.frame)
-
-			err = wait_event_interruptible(cam->wait_queue,
-						       cam->disconnected ||
-						       (!fr->queued));
-			if (err)
-				return err;
-			if (cam->disconnected)
-				return -ENODEV;
-		}
-
-		w9968cf_push_frame(cam, mmap.frame);
-		DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame)
-		return 0;
-	}
-
-	case VIDIOCSYNC: /* wait until the capture of a frame is finished */
-	{
-		unsigned int f_num;
-		struct w9968cf_frame_t* fr;
-		int err = 0;
-
-		if (copy_from_user(&f_num, arg, sizeof(f_num)))
-			return -EFAULT;
-
-		if (f_num >= cam->nbuffers) {
-			DBG(4, "Invalid frame number (%u). "
-			       "VIDIOCMCAPTURE failed", f_num)
-			return -EINVAL;
-		}
-
-		DBG(6, "VIDIOCSYNC called for frame #%u", f_num)
-
-		fr = &cam->frame[f_num];
-
-		switch (fr->status) {
-		case F_UNUSED:
-			if (!fr->queued) {
-				DBG(4, "VIDIOSYNC: Frame #%u not requested!",
-				    f_num)
-				return -EFAULT;
-			}
-		case F_ERROR:
-		case F_GRABBING:
-			err = wait_event_interruptible(cam->wait_queue,
-						       (fr->status == F_READY)
-						       || cam->disconnected);
-			if (err)
-				return err;
-			if (cam->disconnected)
-				return -ENODEV;
-			break;
-		case F_READY:
-			break;
-		}
-
-		if (w9968cf_vpp)
-			w9968cf_postprocess_frame(cam, fr);
-
-		fr->status = F_UNUSED;
-
-		DBG(5, "VIDIOCSYNC(%u) successfully called", f_num)
-		return 0;
-	}
-
-	case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/
-	{
-		struct video_unit unit = {
-			.video = cam->v4ldev->minor,
-			.vbi = VIDEO_NO_UNIT,
-			.radio = VIDEO_NO_UNIT,
-			.audio = VIDEO_NO_UNIT,
-			.teletext = VIDEO_NO_UNIT,
-		};
-
-		if (copy_to_user(arg, &unit, sizeof(unit)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGUNIT successfully called")
-		return 0;
-	}
-
-	case VIDIOCKEY:
-		return 0;
-
-	case VIDIOCGFBUF:
-	{
-		if (clear_user(arg, sizeof(struct video_buffer)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGFBUF successfully called")
-		return 0;
-	}
-
-	case VIDIOCGTUNER:
-	{
-		struct video_tuner tuner;
-		if (copy_from_user(&tuner, arg, sizeof(tuner)))
-			return -EFAULT;
-
-		if (tuner.tuner != 0)
-			return -EINVAL;
-
-		strcpy(tuner.name, "no_tuner");
-		tuner.rangelow = 0;
-		tuner.rangehigh = 0;
-		tuner.flags = VIDEO_TUNER_NORM;
-		tuner.mode = VIDEO_MODE_AUTO;
-		tuner.signal = 0xffff;
-
-		if (copy_to_user(arg, &tuner, sizeof(tuner)))
-			return -EFAULT;
-
-		DBG(5, "VIDIOCGTUNER successfully called")
-		return 0;
-	}
-
-	case VIDIOCSTUNER:
-	{
-		struct video_tuner tuner;
-		if (copy_from_user(&tuner, arg, sizeof(tuner)))
-			return -EFAULT;
-
-		if (tuner.tuner != 0)
-			return -EINVAL;
-
-		if (tuner.mode != VIDEO_MODE_AUTO)
-			return -EINVAL;
-
-		DBG(5, "VIDIOCSTUNER successfully called")
-		return 0;
-	}
-
-	case VIDIOCSFBUF:
-	case VIDIOCCAPTURE:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-	case VIDIOCSPLAYMODE:
-	case VIDIOCSWRITEMODE:
-	case VIDIOCGPLAYINFO:
-	case VIDIOCSMICROCODE:
-	case VIDIOCGVBIFMT:
-	case VIDIOCSVBIFMT:
-		DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
-		       "(type 0x%01X, "
-		       "n. 0x%01X, "
-		       "dir. 0x%01X, "
-		       "size 0x%02X)",
-		    V4L1_IOCTL(cmd),
-		    _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
-
-		return -EINVAL;
-
-	default:
-		DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s "
-		       "type 0x%01X, "
-		       "n. 0x%01X, "
-		       "dir. 0x%01X, "
-		       "size 0x%02X",
-		    V4L1_IOCTL(cmd),
-		    _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
-
-		return -ENOIOCTLCMD;
-
-	} /* end of switch */
-
-ioctl_fail:
-	cam->misconfigured = 1;
-	DBG(1, "VIDIOC%s failed because of hardware problems. "
-	       "To use the camera, close and open it again.", V4L1_IOCTL(cmd))
-	return -EFAULT;
-}
-
-
-static const struct v4l2_file_operations w9968cf_fops = {
-	.owner =   THIS_MODULE,
-	.open =    w9968cf_open,
-	.release = w9968cf_release,
-	.read =    w9968cf_read,
-	.ioctl =   w9968cf_ioctl,
-	.mmap =    w9968cf_mmap,
-};
-
-
-
-/****************************************************************************
- * USB probe and V4L registration, disconnect and id_table[] definition     *
- ****************************************************************************/
-
-static int
-w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct w9968cf_device* cam;
-	int err = 0;
-	enum w9968cf_model_id mod_id;
-	struct list_head* ptr;
-	u8 sc = 0; /* number of simultaneous cameras */
-	static unsigned short dev_nr; /* 0 - we are handling device number n */
-	static unsigned short addrs[] = {
-		OV7xx0_SID,
-		OV6xx0_SID,
-		I2C_CLIENT_END
-	};
-
-	if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[0].idVendor &&
-	    le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
-		mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
-	else if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[1].idVendor &&
-		 le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
-		mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
-	else
-		return -ENODEV;
-
-	cam = (struct w9968cf_device*)
-		  kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
-	if (!cam)
-		return -ENOMEM;
-
-	err = v4l2_device_register(&intf->dev, &cam->v4l2_dev);
-	if (err)
-		goto fail0;
-
-	mutex_init(&cam->dev_mutex);
-	mutex_lock(&cam->dev_mutex);
-
-	cam->usbdev = udev;
-
-	DBG(2, "%s detected", symbolic(camlist, mod_id))
-
-	if (simcams > W9968CF_MAX_DEVICES)
-		simcams = W9968CF_SIMCAMS;
-
-	/* How many cameras are connected ? */
-	mutex_lock(&w9968cf_devlist_mutex);
-	list_for_each(ptr, &w9968cf_dev_list)
-		sc++;
-	mutex_unlock(&w9968cf_devlist_mutex);
-
-	if (sc >= simcams) {
-		DBG(2, "Device rejected: too many connected cameras "
-		       "(max. %u)", simcams)
-		err = -EPERM;
-		goto fail;
-	}
-
-
-	/* Allocate 2 bytes of memory for camera control USB transfers */
-	if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) {
-		DBG(1,"Couldn't allocate memory for camera control transfers")
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	/* Allocate 8 bytes of memory for USB data transfers to the FSB */
-	if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) {
-		DBG(1, "Couldn't allocate memory for data "
-		       "transfers to the FSB")
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	/* Register the V4L device */
-	cam->v4ldev = video_device_alloc();
-	if (!cam->v4ldev) {
-		DBG(1, "Could not allocate memory for a V4L structure")
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
-	cam->v4ldev->fops = &w9968cf_fops;
-	cam->v4ldev->release = video_device_release;
-	video_set_drvdata(cam->v4ldev, cam);
-	cam->v4ldev->v4l2_dev = &cam->v4l2_dev;
-
-	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
-				    video_nr[dev_nr]);
-	if (err) {
-		DBG(1, "V4L device registration failed")
-		if (err == -ENFILE && video_nr[dev_nr] == -1)
-			DBG(2, "Couldn't find a free /dev/videoX node")
-		video_nr[dev_nr] = -1;
-		dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
-		goto fail;
-	}
-
-	DBG(2, "V4L device registered as %s",
-	    video_device_node_name(cam->v4ldev))
-
-	/* Set some basic constants */
-	w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
-
-	/* Add a new entry into the list of V4L registered devices */
-	mutex_lock(&w9968cf_devlist_mutex);
-	list_add(&cam->v4llist, &w9968cf_dev_list);
-	mutex_unlock(&w9968cf_devlist_mutex);
-	dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
-
-	w9968cf_turn_on_led(cam);
-
-	w9968cf_i2c_init(cam);
-	cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev,
-			&cam->i2c_adapter,
-			"ovcamchip", "ovcamchip", 0, addrs);
-
-	usb_set_intfdata(intf, cam);
-	mutex_unlock(&cam->dev_mutex);
-
-	err = w9968cf_sensor_init(cam);
-	return 0;
-
-fail: /* Free unused memory */
-	kfree(cam->control_buffer);
-	kfree(cam->data_buffer);
-	if (cam->v4ldev)
-		video_device_release(cam->v4ldev);
-	mutex_unlock(&cam->dev_mutex);
-	v4l2_device_unregister(&cam->v4l2_dev);
-fail0:
-	kfree(cam);
-	return err;
-}
-
-
-static void w9968cf_usb_disconnect(struct usb_interface* intf)
-{
-	struct w9968cf_device* cam =
-	   (struct w9968cf_device*)usb_get_intfdata(intf);
-
-	if (cam) {
-		down_write(&w9968cf_disconnect);
-		/* Prevent concurrent accesses to data */
-		mutex_lock(&cam->dev_mutex);
-
-		cam->disconnected = 1;
-
-		DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id));
-
-		v4l2_device_disconnect(&cam->v4l2_dev);
-
-		wake_up_interruptible_all(&cam->open);
-
-		if (cam->users) {
-			DBG(2, "The device is open (%s)! "
-			       "Process name: %s. Deregistration and memory "
-			       "deallocation are deferred on close.",
-			    video_device_node_name(cam->v4ldev), cam->command)
-			cam->misconfigured = 1;
-			w9968cf_stop_transfer(cam);
-			wake_up_interruptible(&cam->wait_queue);
-		} else
-			w9968cf_release_resources(cam);
-
-		mutex_unlock(&cam->dev_mutex);
-		up_write(&w9968cf_disconnect);
-
-		if (!cam->users) {
-			kfree(cam);
-		}
-	}
-}
-
-
-static struct usb_driver w9968cf_usb_driver = {
-	.name =       "w9968cf",
-	.id_table =   winbond_id_table,
-	.probe =      w9968cf_usb_probe,
-	.disconnect = w9968cf_usb_disconnect,
-};
-
-
-
-/****************************************************************************
- * Module init, exit and intermodule communication                          *
- ****************************************************************************/
-
-static int __init w9968cf_module_init(void)
-{
-	int err;
-
-	KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION)
-	KDBG(3, W9968CF_MODULE_AUTHOR)
-
-	if ((err = usb_register(&w9968cf_usb_driver)))
-		return err;
-
-	return 0;
-}
-
-
-static void __exit w9968cf_module_exit(void)
-{
-	/* w9968cf_usb_disconnect() will be called */
-	usb_deregister(&w9968cf_usb_driver);
-
-	KDBG(2, W9968CF_MODULE_NAME" deregistered")
-}
-
-
-module_init(w9968cf_module_init);
-module_exit(w9968cf_module_exit);
-
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
deleted file mode 100644
index 73ad864b484..00000000000
--- a/drivers/media/video/w9968cf.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/***************************************************************************
- * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip.       *
- *                                                                         *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#ifndef _W9968CF_H_
-#define _W9968CF_H_
-
-#include <linux/videodev2.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/wait.h>
-#include <linux/param.h>
-#include <linux/types.h>
-#include <linux/rwsem.h>
-#include <linux/mutex.h>
-
-#include <media/v4l2-device.h>
-#include <media/ovcamchip.h>
-
-#include "w9968cf_vpp.h"
-
-
-/****************************************************************************
- * Default values                                                           *
- ****************************************************************************/
-
-#define W9968CF_VPPMOD_LOAD     1  /* automatic 'w9968cf-vpp' module loading */
-
-/* Comment/uncomment the following line to enable/disable debugging messages */
-#define W9968CF_DEBUG
-
-/* These have effect only if W9968CF_DEBUG is defined */
-#define W9968CF_DEBUG_LEVEL    2 /* from 0 to 6. 0 for no debug informations */
-#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */
-
-#define W9968CF_MAX_DEVICES    32
-#define W9968CF_SIMCAMS        W9968CF_MAX_DEVICES /* simultaneous cameras */
-
-#define W9968CF_MAX_BUFFERS   32
-#define W9968CF_BUFFERS       2 /* n. of frame buffers from 2 to MAX_BUFFERS */
-
-/* Maximum data payload sizes in bytes for alternate settings */
-static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575,
-				      511, 447, 383, 319, 255, 191, 127,  63};
-#define W9968CF_PACKET_SIZE      1023 /* according to wMaxPacketSizes[] */
-#define W9968CF_MIN_PACKET_SIZE  63 /* minimum value */
-#define W9968CF_ISO_PACKETS      5 /* n.of packets for isochronous transfers */
-#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */
-#define W9968CF_URBS             2 /* n. of scheduled URBs for ISO transfer */
-
-#define W9968CF_I2C_BUS_DELAY    4 /* delay in us for I2C bit r/w operations */
-#define W9968CF_I2C_RW_RETRIES   15 /* number of max I2C r/w retries */
-
-/* Available video formats */
-struct w9968cf_format {
-	const u16 palette;
-	const u16 depth;
-	const u8 compression;
-};
-
-static const struct w9968cf_format w9968cf_formatlist[] = {
-	{ VIDEO_PALETTE_UYVY,    16, 0 }, /* original video */
-	{ VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */
-	{ VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */
-	{ VIDEO_PALETTE_YUV420,  12, 1 }, /* same as YUV420P */
-	{ VIDEO_PALETTE_YUYV,    16, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_YUV422,  16, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_GREY,     8, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_RGB555,  16, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_RGB565,  16, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_RGB24,   24, 0 }, /* software conversion */
-	{ VIDEO_PALETTE_RGB32,   32, 0 }, /* software conversion */
-	{ 0,                      0, 0 }  /* 0 is a terminating entry */
-};
-
-#define W9968CF_DECOMPRESSION    2 /* decomp:0=disable,1=force,2=any formats */
-#define W9968CF_PALETTE_DECOMP_OFF   VIDEO_PALETTE_UYVY    /* when decomp=0 */
-#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */
-#define W9968CF_PALETTE_DECOMP_ON    VIDEO_PALETTE_UYVY    /* when decomp=2 */
-
-#define W9968CF_FORCE_RGB        0  /* read RGB instead of BGR, yes=1/no=0 */
-
-#define W9968CF_MAX_WIDTH      800 /* Has effect if up-scaling is on */
-#define W9968CF_MAX_HEIGHT     600 /* Has effect if up-scaling is on */
-#define W9968CF_WIDTH          320 /* from 128 to 352, multiple of 16 */
-#define W9968CF_HEIGHT         240 /* from  96 to 288, multiple of 16 */
-
-#define W9968CF_CLAMPING       0 /* 0 disable, 1 enable video data clamping */
-#define W9968CF_FILTER_TYPE    0 /* 0 disable  1 (1-2-1), 2 (2-3-6-3-2) */
-#define W9968CF_DOUBLE_BUFFER  1 /* 0 disable, 1 enable double buffer */
-#define W9968CF_LARGEVIEW      1 /* 0 disable, 1 enable */
-#define W9968CF_UPSCALING      0 /* 0 disable, 1 enable */
-
-#define W9968CF_MONOCHROME     0 /* 0 not monochrome, 1 monochrome sensor */
-#define W9968CF_BRIGHTNESS     31000 /* from 0 to 65535 */
-#define W9968CF_HUE            32768 /* from 0 to 65535 */
-#define W9968CF_COLOUR         32768 /* from 0 to 65535 */
-#define W9968CF_CONTRAST       50000 /* from 0 to 65535 */
-#define W9968CF_WHITENESS      32768 /* from 0 to 65535 */
-
-#define W9968CF_AUTOBRIGHT     0 /* 0 disable, 1 enable automatic brightness */
-#define W9968CF_AUTOEXP        1 /* 0 disable, 1 enable automatic exposure */
-#define W9968CF_LIGHTFREQ      50 /* light frequency. 50Hz (Europe) or 60Hz */
-#define W9968CF_BANDINGFILTER  0 /* 0 disable, 1 enable banding filter */
-#define W9968CF_BACKLIGHT      0 /* 0 or 1, 1=object is lit from behind */
-#define W9968CF_MIRROR         0 /* 0 or 1 [don't] reverse image horizontally*/
-
-#define W9968CF_CLOCKDIV         -1 /* -1 = automatic clock divisor */
-#define W9968CF_DEF_CLOCKDIVISOR  0 /* default sensor clock divisor value */
-
-
-/****************************************************************************
- * Globals                                                                  *
- ****************************************************************************/
-
-#define W9968CF_MODULE_NAME     "V4L driver for W996[87]CF JPEG USB " \
-				"Dual Mode Camera Chip"
-#define W9968CF_MODULE_VERSION  "1:1.34-basic"
-#define W9968CF_MODULE_AUTHOR   "(C) 2002-2004 Luca Risolia"
-#define W9968CF_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
-#define W9968CF_MODULE_LICENSE  "GPL"
-
-static const struct usb_device_id winbond_id_table[] = {
-	{
-		/* Creative Labs Video Blaster WebCam Go Plus */
-		USB_DEVICE(0x041e, 0x4003),
-		.driver_info = (unsigned long)"w9968cf",
-	},
-	{
-		/* Generic W996[87]CF JPEG USB Dual Mode Camera */
-		USB_DEVICE(0x1046, 0x9967),
-		.driver_info = (unsigned long)"w9968cf",
-	},
-	{ } /* terminating entry */
-};
-
-/* W996[87]CF camera models, internal ids: */
-enum w9968cf_model_id {
-	W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */
-	W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/
-	W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */
-	W9986CF_MOD_AAU = 31,     /* AVerMedia AVerTV USB */
-	W9968CF_MOD_CLVBWG = 34,  /* Creative Labs Video Blaster WebCam Go */
-	W9968CF_MOD_LL = 37,      /* Lebon LDC-035A */
-	W9968CF_MOD_EEEMC = 40,   /* Ezonics EZ-802 EZMega Cam */
-	W9968CF_MOD_OOE = 42,     /* OmniVision OV8610-EDE */
-	W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */
-	W9968CF_MOD_PDPII = 46,   /* Pretec Digi Pen-II */
-	W9968CF_MOD_PDP480 = 49,  /* Pretec DigiPen-480 */
-};
-
-enum w9968cf_frame_status {
-	F_READY,            /* finished grabbing & ready to be read/synced */
-	F_GRABBING,         /* in the process of being grabbed into */
-	F_ERROR,            /* something bad happened while processing */
-	F_UNUSED            /* unused (no VIDIOCMCAPTURE) */
-};
-
-struct w9968cf_frame_t {
-	void* buffer;
-	unsigned long size;
-	u32 length;
-	int number;
-	enum w9968cf_frame_status status;
-	struct w9968cf_frame_t* next;
-	u8 queued;
-};
-
-enum w9968cf_vpp_flag {
-	VPP_NONE = 0x00,
-	VPP_UPSCALE = 0x01,
-	VPP_SWAP_YUV_BYTES = 0x02,
-	VPP_DECOMPRESSION = 0x04,
-	VPP_UYVY_TO_RGBX = 0x08,
-};
-
-/* Main device driver structure */
-struct w9968cf_device {
-	enum w9968cf_model_id id;   /* private device identifier */
-
-	struct v4l2_device v4l2_dev;
-	struct video_device* v4ldev; /* -> V4L structure */
-	struct list_head v4llist;    /* entry of the list of V4L cameras */
-
-	struct usb_device* usbdev;           /* -> main USB structure */
-	struct urb* urb[W9968CF_URBS];       /* -> USB request block structs */
-	void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */
-	u16* control_buffer;                 /* -> buffer for control req.*/
-	u16* data_buffer;                    /* -> data to send to the FSB */
-
-	struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS];
-	struct w9968cf_frame_t frame_tmp; /* temporary frame */
-	struct w9968cf_frame_t frame_vpp; /* helper frame.*/
-	struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */
-	struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS];
-
-	u8 max_buffers,   /* number of requested buffers */
-	   force_palette, /* yes=1/no=0 */
-	   force_rgb,     /* read RGB instead of BGR, yes=1, no=0 */
-	   double_buffer, /* hardware double buffering yes=1/no=0 */
-	   clamping,      /* video data clamping yes=1/no=0 */
-	   filter_type,   /* 0=disabled, 1=3 tap, 2=5 tap filter */
-	   capture,       /* 0=disabled, 1=enabled */
-	   largeview,     /* 0=disabled, 1=enabled */
-	   decompression, /* 0=disabled, 1=forced, 2=allowed */
-	   upscaling;     /* software image scaling, 0=enabled, 1=disabled */
-
-	struct video_picture picture; /* current picture settings */
-	struct video_window window;   /* current window settings */
-
-	u16 hw_depth,    /* depth (used by the chip) */
-	    hw_palette,  /* palette (used by the chip) */
-	    hw_width,    /* width (used by the chip) */
-	    hw_height,   /* height (used by the chip) */
-	    hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
-	    vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
-	    start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/
-	    start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/
-
-	enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */
-
-	u8 nbuffers,      /* number of allocated frame buffers */
-	   altsetting,    /* camera alternate setting */
-	   disconnected,  /* flag: yes=1, no=0 */
-	   misconfigured, /* flag: yes=1, no=0 */
-	   users,         /* flag: number of users holding the device */
-	   streaming;     /* flag: yes=1, no=0 */
-
-	u8 sensor_initialized; /* flag: yes=1, no=0 */
-
-	/* Determined by the image sensor type: */
-	int sensor,       /* type of image sensor chip (CC_*) */
-	    monochrome;   /* image sensor is (probably) monochrome */
-	u16 maxwidth,     /* maximum width supported by the image sensor */
-	    maxheight,    /* maximum height supported by the image sensor */
-	    minwidth,     /* minimum width supported by the image sensor */
-	    minheight;    /* minimum height supported by the image sensor */
-	u8  auto_brt,     /* auto brightness enabled flag */
-	    auto_exp,     /* auto exposure enabled flag */
-	    backlight,    /* backlight exposure algorithm flag */
-	    mirror,       /* image is reversed horizontally */
-	    lightfreq,    /* power (lighting) frequency */
-	    bandfilt;     /* banding filter enabled flag */
-	s8  clockdiv;     /* clock divisor */
-
-	/* I2C interface to kernel */
-	struct i2c_adapter i2c_adapter;
-	struct v4l2_subdev *sensor_sd;
-
-	/* Locks */
-	struct mutex dev_mutex,    /* for probe, disconnect,open and close */
-			 fileop_mutex; /* for read and ioctl */
-	spinlock_t urb_lock,   /* for submit_urb() and unlink_urb() */
-		   flist_lock; /* for requested frame list accesses */
-	wait_queue_head_t open, wait_queue;
-
-	char command[16]; /* name of the program holding the device */
-};
-
-static inline struct w9968cf_device *to_cam(struct v4l2_device *v4l2_dev)
-{
-	return container_of(v4l2_dev, struct w9968cf_device, v4l2_dev);
-}
-
-
-/****************************************************************************
- * Macros for debugging                                                     *
- ****************************************************************************/
-
-#undef DBG
-#undef KDBG
-#ifdef W9968CF_DEBUG
-/* For device specific debugging messages */
-#	define DBG(level, fmt, args...)                                       \
-{                                                                             \
-	if ( ((specific_debug) && (debug == (level))) ||                      \
-	     ((!specific_debug) && (debug >= (level))) ) {                    \
-		if ((level) == 1)                                             \
-			v4l2_err(&cam->v4l2_dev, fmt "\n", ## args);          \
-		else if ((level) == 2 || (level) == 3)                        \
-			v4l2_info(&cam->v4l2_dev, fmt "\n", ## args);         \
-		else if ((level) == 4)                                        \
-			v4l2_warn(&cam->v4l2_dev, fmt "\n", ## args);         \
-		else if ((level) >= 5)                                        \
-			v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n",        \
-				 __func__, __LINE__ , ## args);               \
-	}                                                                     \
-}
-/* For generic kernel (not device specific) messages */
-#	define KDBG(level, fmt, args...)                                      \
-{                                                                             \
-	if ( ((specific_debug) && (debug == (level))) ||                      \
-	     ((!specific_debug) && (debug >= (level))) ) {                    \
-		if ((level) >= 1 && (level) <= 4)                             \
-			pr_info("w9968cf: " fmt "\n", ## args);               \
-		else if ((level) >= 5)                                        \
-			pr_debug("w9968cf: [%s:%d] " fmt "\n", __func__,  \
-				 __LINE__ , ## args);                         \
-	}                                                                     \
-}
-#else
-	/* Not debugging: nothing */
-#	define DBG(level, fmt, args...) do {;} while(0);
-#	define KDBG(level, fmt, args...) do {;} while(0);
-#endif
-
-#undef PDBG
-#define PDBG(fmt, args...)                                                    \
-v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n", __func__, __LINE__ , ## args);
-
-#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */
-
-#endif /* _W9968CF_H_ */
diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h
deleted file mode 100644
index 59decbfc540..00000000000
--- a/drivers/media/video/w9968cf_decoder.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/***************************************************************************
- * Video decoder for the W996[87]CF driver for Linux.                      *
- *                                                                         *
- * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#ifndef _W9968CF_DECODER_H_
-#define _W9968CF_DECODER_H_
-
-/* Comment/uncomment this for high/low quality of compressed video */
-#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO
-
-#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO
-static const unsigned char Y_QUANTABLE[64] = {
-	16,  11,  10,  16,  24,  40,  51,  61,
-	12,  12,  14,  19,  26,  58,  60,  55,
-	14,  13,  16,  24,  40,  57,  69,  56,
-	14,  17,  22,  29,  51,  87,  80,  62,
-	18,  22,  37,  56,  68, 109, 103,  77,
-	24,  35,  55,  64,  81, 104, 113,  92,
-	49,  64,  78,  87, 103, 121, 120, 101,
-	72,  92,  95,  98, 112, 100, 103,  99
-};
-
-static const unsigned char UV_QUANTABLE[64] = {
-	17,  18,  24,  47,  99,  99,  99,  99,
-	18,  21,  26,  66,  99,  99,  99,  99,
-	24,  26,  56,  99,  99,  99,  99,  99,
-	47,  66,  99,  99,  99,  99,  99,  99,
-	99,  99,  99,  99,  99,  99,  99,  99,
-	99,  99,  99,  99,  99,  99,  99,  99,
-	99,  99,  99,  99,  99,  99,  99,  99,
-	99,  99,  99,  99,  99,  99,  99,  99
-};
-#else
-static const unsigned char Y_QUANTABLE[64] = {
-	 8,   5,   5,   8,  12,  20,  25,  30,
-	 6,   6,   7,   9,  13,  29,  30,  27,
-	 7,   6,   8,  12,  20,  28,  34,  28,
-	 7,   8,  11,  14,  25,  43,  40,  31,
-	 9,  11,  18,  28,  34,  54,  51,  38,
-	12,  17,  27,  32,  40,  52,  56,  46,
-	24,  32,  39,  43,  51,  60,  60,  50,
-	36,  46,  47,  49,  56,  50,  51,  49
-};
-
-static const unsigned char UV_QUANTABLE[64] = {
-	 8,   9,  12,  23,  49,  49,  49,  49,
-	 9,  10,  13,  33,  49,  49,  49,  49,
-	12,  13,  28,  49,  49,  49,  49,  49,
-	23,  33,  49,  49,  49,  49,  49,  49,
-	49,  49,  49,  49,  49,  49,  49,  49,
-	49,  49,  49,  49,  49,  49,  49,  49,
-	49,  49,  49,  49,  49,  49,  49,  49,
-	49,  49,  49,  49,  49,  49,  49,  49
-};
-#endif
-
-#define W9968CF_DEC_ERR_CORRUPTED_DATA  -1
-#define W9968CF_DEC_ERR_BUF_OVERFLOW    -2
-#define W9968CF_DEC_ERR_NO_SOI          -3
-#define W9968CF_DEC_ERR_NO_SOF0         -4
-#define W9968CF_DEC_ERR_NO_SOS          -5
-#define W9968CF_DEC_ERR_NO_EOI          -6
-
-extern void w9968cf_init_decoder(void);
-extern int w9968cf_check_headers(const unsigned char* Pin,
-				 const unsigned long BUF_SIZE);
-extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE,
-			  const unsigned W, const unsigned H, char* Pout);
-
-#endif /* _W9968CF_DECODER_H_ */
diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h
deleted file mode 100644
index 88c9b6c0cc3..00000000000
--- a/drivers/media/video/w9968cf_vpp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/***************************************************************************
- * Interface for video post-processing functions for the W996[87]CF driver *
- * for Linux.                                                              *
- *                                                                         *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#ifndef _W9968CF_VPP_H_
-#define _W9968CF_VPP_H_
-
-#include <linux/module.h>
-#include <asm/types.h>
-
-struct w9968cf_vpp_t {
-	struct module* owner;
-	int (*check_headers)(const unsigned char*, const unsigned long);
-	int (*decode)(const char*, const unsigned long, const unsigned,
-		      const unsigned, char*);
-	void (*swap_yuvbytes)(void*, unsigned long);
-	void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8);
-	void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16);
-
-	u8 busy; /* read-only flag: module is/is not in use */
-};
-
-#endif /* _W9968CF_VPP_H_ */
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
deleted file mode 100644
index a7e610e0be9..00000000000
--- a/drivers/media/video/zc0301/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config USB_ZC0301
-	tristate "USB ZC0301[P] webcam support (DEPRECATED)"
-	depends on VIDEO_V4L2
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca zc3xx module
-	  instead.
-
-	  Say Y here if you want support for cameras based on the ZC0301 or
-	  ZC0301P Image Processors and Control Chips.
-
-	  See <file:Documentation/video4linux/zc0301.txt> for more info.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called zc0301.
diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile
deleted file mode 100644
index d9e6d97fade..00000000000
--- a/drivers/media/video/zc0301/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-zc0301-objs     := zc0301_core.o zc0301_pb0330.o zc0301_pas202bcb.o
-
-obj-$(CONFIG_USB_ZC0301)        += zc0301.o
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
deleted file mode 100644
index b1b5cceb4ba..00000000000
--- a/drivers/media/video/zc0301/zc0301.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/***************************************************************************
- * V4L2 driver for ZC0301[P] Image Processor and Control Chip              *
- *                                                                         *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#ifndef _ZC0301_H_
-#define _ZC0301_H_
-
-#include <linux/version.h>
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <linux/param.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/stddef.h>
-#include <linux/string.h>
-#include <linux/kref.h>
-
-#include "zc0301_sensor.h"
-
-/*****************************************************************************/
-
-#define ZC0301_DEBUG
-#define ZC0301_DEBUG_LEVEL         2
-#define ZC0301_MAX_DEVICES         64
-#define ZC0301_FORCE_MUNMAP        0
-#define ZC0301_MAX_FRAMES          32
-#define ZC0301_COMPRESSION_QUALITY 0
-#define ZC0301_URBS                2
-#define ZC0301_ISO_PACKETS         7
-#define ZC0301_ALTERNATE_SETTING   7
-#define ZC0301_URB_TIMEOUT         msecs_to_jiffies(2 * ZC0301_ISO_PACKETS)
-#define ZC0301_CTRL_TIMEOUT        100
-#define ZC0301_FRAME_TIMEOUT       2
-
-/*****************************************************************************/
-
-ZC0301_ID_TABLE
-ZC0301_SENSOR_TABLE
-
-enum zc0301_frame_state {
-	F_UNUSED,
-	F_QUEUED,
-	F_GRABBING,
-	F_DONE,
-	F_ERROR,
-};
-
-struct zc0301_frame_t {
-	void* bufmem;
-	struct v4l2_buffer buf;
-	enum zc0301_frame_state state;
-	struct list_head frame;
-	unsigned long vma_use_count;
-};
-
-enum zc0301_dev_state {
-	DEV_INITIALIZED = 0x01,
-	DEV_DISCONNECTED = 0x02,
-	DEV_MISCONFIGURED = 0x04,
-};
-
-enum zc0301_io_method {
-	IO_NONE,
-	IO_READ,
-	IO_MMAP,
-};
-
-enum zc0301_stream_state {
-	STREAM_OFF,
-	STREAM_INTERRUPT,
-	STREAM_ON,
-};
-
-struct zc0301_module_param {
-	u8 force_munmap;
-	u16 frame_timeout;
-};
-
-static DECLARE_RWSEM(zc0301_dev_lock);
-
-struct zc0301_device {
-	struct video_device* v4ldev;
-
-	struct zc0301_sensor sensor;
-
-	struct usb_device* usbdev;
-	struct urb* urb[ZC0301_URBS];
-	void* transfer_buffer[ZC0301_URBS];
-	u8* control_buffer;
-
-	struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES];
-	struct list_head inqueue, outqueue;
-	u32 frame_count, nbuffers, nreadbuffers;
-
-	enum zc0301_io_method io;
-	enum zc0301_stream_state stream;
-
-	struct v4l2_jpegcompression compression;
-
-	struct zc0301_module_param module_param;
-
-	struct kref kref;
-	enum zc0301_dev_state state;
-	u8 users;
-
-	struct completion probe;
-	struct mutex open_mutex, fileop_mutex;
-	spinlock_t queue_lock;
-	wait_queue_head_t wait_open, wait_frame, wait_stream;
-};
-
-/*****************************************************************************/
-
-struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id)
-{
-	return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
-}
-
-void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor)
-{
-	memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor));
-}
-
-/*****************************************************************************/
-
-#undef DBG
-#undef KDBG
-#ifdef ZC0301_DEBUG
-#	define DBG(level, fmt, args...)                                       \
-do {                                                                          \
-	if (debug >= (level)) {                                               \
-		if ((level) == 1)                                             \
-			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
-		else if ((level) == 2)                                        \
-			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
-		else if ((level) >= 3)                                        \
-			dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n",   \
-				 __FILE__, __func__, __LINE__ , ## args); \
-	}                                                                     \
-} while (0)
-#	define KDBG(level, fmt, args...)                                      \
-do {                                                                          \
-	if (debug >= (level)) {                                               \
-		if ((level) == 1 || (level) == 2)                             \
-			pr_info("zc0301: " fmt "\n", ## args);                \
-		else if ((level) == 3)                                        \
-			pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__,   \
-				 __func__, __LINE__ , ## args);           \
-	}                                                                     \
-} while (0)
-#	define V4LDBG(level, name, cmd)                                       \
-do {                                                                          \
-	if (debug >= (level))                                                 \
-		v4l_print_ioctl(name, cmd);                                   \
-} while (0)
-#else
-#	define DBG(level, fmt, args...) do {;} while(0)
-#	define KDBG(level, fmt, args...) do {;} while(0)
-#	define V4LDBG(level, name, cmd) do {;} while(0)
-#endif
-
-#undef PDBG
-#define PDBG(fmt, args...)                                                    \
-dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__,   \
-	 __LINE__ , ## args)
-
-#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
-
-#endif /* _ZC0301_H_ */
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
deleted file mode 100644
index bb51cfb0c64..00000000000
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ /dev/null
@@ -1,2098 +0,0 @@
-/***************************************************************************
- * Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip      *
- *                                                                         *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * Informations about the chip internals needed to enable the I2C protocol *
- * have been taken from the documentation of the ZC030x Video4Linux1       *
- * driver written by Andrew Birkett <andy@nobugs.org>                      *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/poll.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/page-flags.h>
-#include <asm/byteorder.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-#include "zc0301.h"
-
-/*****************************************************************************/
-
-#define ZC0301_MODULE_NAME    "V4L2 driver for ZC0301[P] "                    \
-			      "Image Processor and Control Chip"
-#define ZC0301_MODULE_AUTHOR  "(C) 2006-2007 Luca Risolia"
-#define ZC0301_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
-#define ZC0301_MODULE_LICENSE "GPL"
-#define ZC0301_MODULE_VERSION "1:1.10"
-#define ZC0301_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 10)
-
-/*****************************************************************************/
-
-MODULE_DEVICE_TABLE(usb, zc0301_id_table);
-
-MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL);
-MODULE_DESCRIPTION(ZC0301_MODULE_NAME);
-MODULE_VERSION(ZC0301_MODULE_VERSION);
-MODULE_LICENSE(ZC0301_MODULE_LICENSE);
-
-static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1};
-module_param_array(video_nr, short, NULL, 0444);
-MODULE_PARM_DESC(video_nr,
-		 "\n<-1|n[,...]> Specify V4L2 minor mode number."
-		 "\n -1 = use next available (default)"
-		 "\n  n = use minor number n (integer >= 0)"
-		 "\nYou can specify up to "
-		 __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
-		 "\nFor example:"
-		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
-		 "\nthe second registered camera and use auto for the first"
-		 "\none and for every other camera."
-		 "\n");
-
-static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] =
-			       ZC0301_FORCE_MUNMAP};
-module_param_array(force_munmap, bool, NULL, 0444);
-MODULE_PARM_DESC(force_munmap,
-		 "\n<0|1[,...]> Force the application to unmap previously"
-		 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
-		 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
-		 "\nthis feature. This parameter is specific for each"
-		 "\ndetected camera."
-		 "\n 0 = do not force memory unmapping"
-		 "\n 1 = force memory unmapping (save memory)"
-		 "\nDefault value is "__MODULE_STRING(ZC0301_FORCE_MUNMAP)"."
-		 "\n");
-
-static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
-				       ZC0301_FRAME_TIMEOUT};
-module_param_array(frame_timeout, uint, NULL, 0644);
-MODULE_PARM_DESC(frame_timeout,
-		 "\n<n[,...]> Timeout for a video frame in seconds."
-		 "\nThis parameter is specific for each detected camera."
-		 "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
-		 "\n");
-
-#ifdef ZC0301_DEBUG
-static unsigned short debug = ZC0301_DEBUG_LEVEL;
-module_param(debug, ushort, 0644);
-MODULE_PARM_DESC(debug,
-		 "\n<n> Debugging information level, from 0 to 3:"
-		 "\n0 = none (use carefully)"
-		 "\n1 = critical errors"
-		 "\n2 = significant informations"
-		 "\n3 = more verbose messages"
-		 "\nLevel 3 is useful for testing only, when only "
-		 "one device is used."
-		 "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
-		 "\n");
-#endif
-
-/*****************************************************************************/
-
-static u32
-zc0301_request_buffers(struct zc0301_device* cam, u32 count,
-		       enum zc0301_io_method io)
-{
-	struct v4l2_pix_format* p = &(cam->sensor.pix_format);
-	struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
-	const size_t imagesize = cam->module_param.force_munmap ||
-				 io == IO_READ ?
-				 (p->width * p->height * p->priv) / 8 :
-				 (r->width * r->height * p->priv) / 8;
-	void* buff = NULL;
-	u32 i;
-
-	if (count > ZC0301_MAX_FRAMES)
-		count = ZC0301_MAX_FRAMES;
-
-	cam->nbuffers = count;
-	while (cam->nbuffers > 0) {
-		if ((buff = vmalloc_32_user(cam->nbuffers *
-					    PAGE_ALIGN(imagesize))))
-			break;
-		cam->nbuffers--;
-	}
-
-	for (i = 0; i < cam->nbuffers; i++) {
-		cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
-		cam->frame[i].buf.index = i;
-		cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
-		cam->frame[i].buf.length = imagesize;
-		cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		cam->frame[i].buf.sequence = 0;
-		cam->frame[i].buf.field = V4L2_FIELD_NONE;
-		cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
-		cam->frame[i].buf.flags = 0;
-	}
-
-	return cam->nbuffers;
-}
-
-
-static void zc0301_release_buffers(struct zc0301_device* cam)
-{
-	if (cam->nbuffers) {
-		vfree(cam->frame[0].bufmem);
-		cam->nbuffers = 0;
-	}
-	cam->frame_current = NULL;
-}
-
-
-static void zc0301_empty_framequeues(struct zc0301_device* cam)
-{
-	u32 i;
-
-	INIT_LIST_HEAD(&cam->inqueue);
-	INIT_LIST_HEAD(&cam->outqueue);
-
-	for (i = 0; i < ZC0301_MAX_FRAMES; i++) {
-		cam->frame[i].state = F_UNUSED;
-		cam->frame[i].buf.bytesused = 0;
-	}
-}
-
-
-static void zc0301_requeue_outqueue(struct zc0301_device* cam)
-{
-	struct zc0301_frame_t *i;
-
-	list_for_each_entry(i, &cam->outqueue, frame) {
-		i->state = F_QUEUED;
-		list_add(&i->frame, &cam->inqueue);
-	}
-
-	INIT_LIST_HEAD(&cam->outqueue);
-}
-
-
-static void zc0301_queue_unusedframes(struct zc0301_device* cam)
-{
-	unsigned long lock_flags;
-	u32 i;
-
-	for (i = 0; i < cam->nbuffers; i++)
-		if (cam->frame[i].state == F_UNUSED) {
-			cam->frame[i].state = F_QUEUED;
-			spin_lock_irqsave(&cam->queue_lock, lock_flags);
-			list_add_tail(&cam->frame[i].frame, &cam->inqueue);
-			spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-		}
-}
-
-/*****************************************************************************/
-
-int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value)
-{
-	struct usb_device* udev = cam->usbdev;
-	int res;
-
-	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40,
-			      value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
-	if (res < 0) {
-		DBG(3, "Failed to write a register (index 0x%04X, "
-		       "value 0x%02X, error %d)",index, value, res);
-		return -1;
-	}
-
-	return 0;
-}
-
-
-int zc0301_read_reg(struct zc0301_device* cam, u16 index)
-{
-	struct usb_device* udev = cam->usbdev;
-	u8* buff = cam->control_buffer;
-	int res;
-
-	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0,
-			      0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
-	if (res < 0)
-		DBG(3, "Failed to read a register (index 0x%04X, error %d)",
-		    index, res);
-
-	PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff));
-
-	return (res >= 0) ? (int)(*buff) : -1;
-}
-
-
-int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length)
-{
-	int err = 0, res, r0, r1;
-
-	err += zc0301_write_reg(cam, 0x0092, address);
-	err += zc0301_write_reg(cam, 0x0090, 0x02);
-
-	msleep(1);
-
-	res = zc0301_read_reg(cam, 0x0091);
-	if (res < 0)
-		err += res;
-	r0 = zc0301_read_reg(cam, 0x0095);
-	if (r0 < 0)
-		err += r0;
-	r1 = zc0301_read_reg(cam, 0x0096);
-	if (r1 < 0)
-		err += r1;
-
-	res = (length <= 1) ? r0 : r0 | (r1 << 8);
-
-	if (err)
-		DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X",
-		    address, res);
-
-
-	PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res);
-
-	return err ? -1 : res;
-}
-
-
-int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value)
-{
-	int err = 0, res;
-
-	err += zc0301_write_reg(cam, 0x0092, address);
-	err += zc0301_write_reg(cam, 0x0093, value & 0xff);
-	err += zc0301_write_reg(cam, 0x0094, value >> 8);
-	err += zc0301_write_reg(cam, 0x0090, 0x01);
-
-	msleep(1);
-
-	res = zc0301_read_reg(cam, 0x0091);
-	if (res < 0)
-		err += res;
-
-	if (err)
-		DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X",
-		    address, value);
-
-	PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value);
-
-	return err ? -1 : 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_urb_complete(struct urb *urb)
-{
-	struct zc0301_device* cam = urb->context;
-	struct zc0301_frame_t** f;
-	size_t imagesize;
-	u8 i;
-	int err = 0;
-
-	if (urb->status == -ENOENT)
-		return;
-
-	f = &cam->frame_current;
-
-	if (cam->stream == STREAM_INTERRUPT) {
-		cam->stream = STREAM_OFF;
-		if ((*f))
-			(*f)->state = F_QUEUED;
-		DBG(3, "Stream interrupted");
-		wake_up(&cam->wait_stream);
-	}
-
-	if (cam->state & DEV_DISCONNECTED)
-		return;
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		wake_up_interruptible(&cam->wait_frame);
-		return;
-	}
-
-	if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
-		goto resubmit_urb;
-
-	if (!(*f))
-		(*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
-				  frame);
-
-	imagesize = (cam->sensor.pix_format.width *
-		     cam->sensor.pix_format.height *
-		     cam->sensor.pix_format.priv) / 8;
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		unsigned int len, status;
-		void *pos;
-		u16* soi;
-		u8 sof;
-
-		len = urb->iso_frame_desc[i].actual_length;
-		status = urb->iso_frame_desc[i].status;
-		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
-
-		if (status) {
-			DBG(3, "Error in isochronous frame");
-			(*f)->state = F_ERROR;
-			continue;
-		}
-
-		sof = (*(soi = pos) == 0xd8ff);
-
-		PDBGG("Isochrnous frame: length %u, #%u i,", len, i);
-
-		if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
-start_of_frame:
-			if (sof) {
-				(*f)->state = F_GRABBING;
-				(*f)->buf.bytesused = 0;
-				do_gettimeofday(&(*f)->buf.timestamp);
-				DBG(3, "SOF detected: new video frame");
-			}
-
-		if ((*f)->state == F_GRABBING) {
-			if (sof && (*f)->buf.bytesused)
-					goto end_of_frame;
-
-			if ((*f)->buf.bytesused + len > imagesize) {
-				DBG(3, "Video frame size exceeded");
-				(*f)->state = F_ERROR;
-				continue;
-			}
-
-			memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len);
-			(*f)->buf.bytesused += len;
-
-			if ((*f)->buf.bytesused == imagesize) {
-				u32 b;
-end_of_frame:
-				b = (*f)->buf.bytesused;
-				(*f)->state = F_DONE;
-				(*f)->buf.sequence= ++cam->frame_count;
-				spin_lock(&cam->queue_lock);
-				list_move_tail(&(*f)->frame, &cam->outqueue);
-				if (!list_empty(&cam->inqueue))
-					(*f) = list_entry(cam->inqueue.next,
-						       struct zc0301_frame_t,
-							  frame);
-				else
-					(*f) = NULL;
-				spin_unlock(&cam->queue_lock);
-				DBG(3, "Video frame captured: : %lu bytes",
-				       (unsigned long)(b));
-
-				if (!(*f))
-					goto resubmit_urb;
-
-				if (sof)
-					goto start_of_frame;
-			}
-		}
-	}
-
-resubmit_urb:
-	urb->dev = cam->usbdev;
-	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err < 0 && err != -EPERM) {
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "usb_submit_urb() failed");
-	}
-
-	wake_up_interruptible(&cam->wait_frame);
-}
-
-
-static int zc0301_start_transfer(struct zc0301_device* cam)
-{
-	struct usb_device *udev = cam->usbdev;
-	struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
-						     usb_ifnum_to_if(udev, 0),
-						     ZC0301_ALTERNATE_SETTING);
-	const unsigned int psz = le16_to_cpu(altsetting->
-					     endpoint[0].desc.wMaxPacketSize);
-	struct urb* urb;
-	s8 i, j;
-	int err = 0;
-
-	for (i = 0; i < ZC0301_URBS; i++) {
-		cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz,
-						  GFP_KERNEL);
-		if (!cam->transfer_buffer[i]) {
-			err = -ENOMEM;
-			DBG(1, "Not enough memory");
-			goto free_buffers;
-		}
-	}
-
-	for (i = 0; i < ZC0301_URBS; i++) {
-		urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL);
-		cam->urb[i] = urb;
-		if (!urb) {
-			err = -ENOMEM;
-			DBG(1, "usb_alloc_urb() failed");
-			goto free_urbs;
-		}
-		urb->dev = udev;
-		urb->context = cam;
-		urb->pipe = usb_rcvisocpipe(udev, 1);
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->number_of_packets = ZC0301_ISO_PACKETS;
-		urb->complete = zc0301_urb_complete;
-		urb->transfer_buffer = cam->transfer_buffer[i];
-		urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS;
-		urb->interval = 1;
-		for (j = 0; j < ZC0301_ISO_PACKETS; j++) {
-			urb->iso_frame_desc[j].offset = psz * j;
-			urb->iso_frame_desc[j].length = psz;
-		}
-	}
-
-	err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING);
-	if (err) {
-		DBG(1, "usb_set_interface() failed");
-		goto free_urbs;
-	}
-
-	cam->frame_current = NULL;
-
-	for (i = 0; i < ZC0301_URBS; i++) {
-		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
-		if (err) {
-			for (j = i-1; j >= 0; j--)
-				usb_kill_urb(cam->urb[j]);
-			DBG(1, "usb_submit_urb() failed, error %d", err);
-			goto free_urbs;
-		}
-	}
-
-	return 0;
-
-free_urbs:
-	for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++)
-		usb_free_urb(cam->urb[i]);
-
-free_buffers:
-	for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++)
-		kfree(cam->transfer_buffer[i]);
-
-	return err;
-}
-
-
-static int zc0301_stop_transfer(struct zc0301_device* cam)
-{
-	struct usb_device *udev = cam->usbdev;
-	s8 i;
-	int err = 0;
-
-	if (cam->state & DEV_DISCONNECTED)
-		return 0;
-
-	for (i = ZC0301_URBS-1; i >= 0; i--) {
-		usb_kill_urb(cam->urb[i]);
-		usb_free_urb(cam->urb[i]);
-		kfree(cam->transfer_buffer[i]);
-	}
-
-	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
-	if (err)
-		DBG(3, "usb_set_interface() failed");
-
-	return err;
-}
-
-
-static int zc0301_stream_interrupt(struct zc0301_device* cam)
-{
-	long timeout;
-
-	cam->stream = STREAM_INTERRUPT;
-	timeout = wait_event_timeout(cam->wait_stream,
-				     (cam->stream == STREAM_OFF) ||
-				     (cam->state & DEV_DISCONNECTED),
-				     ZC0301_URB_TIMEOUT);
-	if (cam->state & DEV_DISCONNECTED)
-		return -ENODEV;
-	else if (cam->stream != STREAM_OFF) {
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "URB timeout reached. The camera is misconfigured. To "
-		       "use it, close and open %s again.",
-		    video_device_node_name(cam->v4ldev));
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_set_compression(struct zc0301_device* cam,
-		       struct v4l2_jpegcompression* compression)
-{
-	int r, err = 0;
-
-	if ((r = zc0301_read_reg(cam, 0x0008)) < 0)
-		err += r;
-	err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality);
-
-	return err ? -EIO : 0;
-}
-
-
-static int zc0301_init(struct zc0301_device* cam)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_control ctrl;
-	struct v4l2_queryctrl *qctrl;
-	struct v4l2_rect* rect;
-	u8 i = 0;
-	int err = 0;
-
-	if (!(cam->state & DEV_INITIALIZED)) {
-		mutex_init(&cam->open_mutex);
-		init_waitqueue_head(&cam->wait_open);
-		qctrl = s->qctrl;
-		rect = &(s->cropcap.defrect);
-		cam->compression.quality = ZC0301_COMPRESSION_QUALITY;
-	} else { /* use current values */
-		qctrl = s->_qctrl;
-		rect = &(s->_rect);
-	}
-
-	if (s->init) {
-		err = s->init(cam);
-		if (err) {
-			DBG(3, "Sensor initialization failed");
-			return err;
-		}
-	}
-
-	if ((err = zc0301_set_compression(cam, &cam->compression))) {
-		DBG(3, "set_compression() failed");
-		return err;
-	}
-
-	if (s->set_crop)
-		if ((err = s->set_crop(cam, rect))) {
-			DBG(3, "set_crop() failed");
-			return err;
-		}
-
-	if (s->set_ctrl) {
-		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
-			if (s->qctrl[i].id != 0 &&
-			    !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
-				ctrl.id = s->qctrl[i].id;
-				ctrl.value = qctrl[i].default_value;
-				err = s->set_ctrl(cam, &ctrl);
-				if (err) {
-					DBG(3, "Set %s control failed",
-					    s->qctrl[i].name);
-					return err;
-				}
-				DBG(3, "Image sensor supports '%s' control",
-				    s->qctrl[i].name);
-			}
-	}
-
-	if (!(cam->state & DEV_INITIALIZED)) {
-		mutex_init(&cam->fileop_mutex);
-		spin_lock_init(&cam->queue_lock);
-		init_waitqueue_head(&cam->wait_frame);
-		init_waitqueue_head(&cam->wait_stream);
-		cam->nreadbuffers = 2;
-		memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
-		memcpy(&(s->_rect), &(s->cropcap.defrect),
-		       sizeof(struct v4l2_rect));
-		cam->state |= DEV_INITIALIZED;
-	}
-
-	DBG(2, "Initialization succeeded");
-	return 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_release_resources(struct kref *kref)
-{
-	struct zc0301_device *cam = container_of(kref, struct zc0301_device,
-						 kref);
-	DBG(2, "V4L2 device %s deregistered",
-	    video_device_node_name(cam->v4ldev));
-	video_set_drvdata(cam->v4ldev, NULL);
-	video_unregister_device(cam->v4ldev);
-	usb_put_dev(cam->usbdev);
-	kfree(cam->control_buffer);
-	kfree(cam);
-}
-
-
-static int zc0301_open(struct file *filp)
-{
-	struct zc0301_device* cam;
-	int err = 0;
-
-	if (!down_read_trylock(&zc0301_dev_lock))
-		return -EAGAIN;
-
-	cam = video_drvdata(filp);
-
-	if (wait_for_completion_interruptible(&cam->probe)) {
-		up_read(&zc0301_dev_lock);
-		return -ERESTARTSYS;
-	}
-
-	kref_get(&cam->kref);
-
-	if (mutex_lock_interruptible(&cam->open_mutex)) {
-		kref_put(&cam->kref, zc0301_release_resources);
-		up_read(&zc0301_dev_lock);
-		return -ERESTARTSYS;
-	}
-
-	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present");
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (cam->users) {
-		DBG(2, "Device %s is busy...",
-		    video_device_node_name(cam->v4ldev));
-		DBG(3, "Simultaneous opens are not supported");
-		if ((filp->f_flags & O_NONBLOCK) ||
-		    (filp->f_flags & O_NDELAY)) {
-			err = -EWOULDBLOCK;
-			goto out;
-		}
-		DBG(2, "A blocking open() has been requested. Wait for the "
-		       "device to be released...");
-		up_read(&zc0301_dev_lock);
-		err = wait_event_interruptible_exclusive(cam->wait_open,
-						(cam->state & DEV_DISCONNECTED)
-							 || !cam->users);
-		down_read(&zc0301_dev_lock);
-		if (err)
-			goto out;
-		if (cam->state & DEV_DISCONNECTED) {
-			err = -ENODEV;
-			goto out;
-		}
-	}
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		err = zc0301_init(cam);
-		if (err) {
-			DBG(1, "Initialization failed again. "
-			       "I will retry on next open().");
-			goto out;
-		}
-		cam->state &= ~DEV_MISCONFIGURED;
-	}
-
-	if ((err = zc0301_start_transfer(cam)))
-		goto out;
-
-	filp->private_data = cam;
-	cam->users++;
-	cam->io = IO_NONE;
-	cam->stream = STREAM_OFF;
-	cam->nbuffers = 0;
-	cam->frame_count = 0;
-	zc0301_empty_framequeues(cam);
-
-	DBG(3, "Video device %s is open",
-	    video_device_node_name(cam->v4ldev));
-
-out:
-	mutex_unlock(&cam->open_mutex);
-	if (err)
-		kref_put(&cam->kref, zc0301_release_resources);
-	up_read(&zc0301_dev_lock);
-	return err;
-}
-
-
-static int zc0301_release(struct file *filp)
-{
-	struct zc0301_device* cam;
-
-	down_write(&zc0301_dev_lock);
-
-	cam = video_drvdata(filp);
-
-	zc0301_stop_transfer(cam);
-	zc0301_release_buffers(cam);
-	cam->users--;
-	wake_up_interruptible_nr(&cam->wait_open, 1);
-
-	DBG(3, "Video device %s closed",
-	    video_device_node_name(cam->v4ldev));
-
-	kref_put(&cam->kref, zc0301_release_resources);
-
-	up_write(&zc0301_dev_lock);
-
-	return 0;
-}
-
-
-static ssize_t
-zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
-{
-	struct zc0301_device *cam = video_drvdata(filp);
-	struct zc0301_frame_t* f, * i;
-	unsigned long lock_flags;
-	long timeout;
-	int err = 0;
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return -ERESTARTSYS;
-
-	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present");
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it "
-		       "again.");
-		mutex_unlock(&cam->fileop_mutex);
-		return -EIO;
-	}
-
-	if (cam->io == IO_MMAP) {
-		DBG(3, "Close and open the device again to choose the read "
-		       "method");
-		mutex_unlock(&cam->fileop_mutex);
-		return -EBUSY;
-	}
-
-	if (cam->io == IO_NONE) {
-		if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
-			DBG(1, "read() failed, not enough memory");
-			mutex_unlock(&cam->fileop_mutex);
-			return -ENOMEM;
-		}
-		cam->io = IO_READ;
-		cam->stream = STREAM_ON;
-	}
-
-	if (list_empty(&cam->inqueue)) {
-		if (!list_empty(&cam->outqueue))
-			zc0301_empty_framequeues(cam);
-		zc0301_queue_unusedframes(cam);
-	}
-
-	if (!count) {
-		mutex_unlock(&cam->fileop_mutex);
-		return 0;
-	}
-
-	if (list_empty(&cam->outqueue)) {
-		if (filp->f_flags & O_NONBLOCK) {
-			mutex_unlock(&cam->fileop_mutex);
-			return -EAGAIN;
-		}
-		timeout = wait_event_interruptible_timeout
-			  ( cam->wait_frame,
-			    (!list_empty(&cam->outqueue)) ||
-			    (cam->state & DEV_DISCONNECTED) ||
-			    (cam->state & DEV_MISCONFIGURED),
-			    msecs_to_jiffies(
-				cam->module_param.frame_timeout * 1000
-			    )
-			  );
-		if (timeout < 0) {
-			mutex_unlock(&cam->fileop_mutex);
-			return timeout;
-		}
-		if (cam->state & DEV_DISCONNECTED) {
-			mutex_unlock(&cam->fileop_mutex);
-			return -ENODEV;
-		}
-		if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
-			mutex_unlock(&cam->fileop_mutex);
-			return -EIO;
-		}
-	}
-
-	f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame);
-
-	if (count > f->buf.bytesused)
-		count = f->buf.bytesused;
-
-	if (copy_to_user(buf, f->bufmem, count)) {
-		err = -EFAULT;
-		goto exit;
-	}
-	*f_pos += count;
-
-exit:
-	spin_lock_irqsave(&cam->queue_lock, lock_flags);
-	list_for_each_entry(i, &cam->outqueue, frame)
-		i->state = F_UNUSED;
-	INIT_LIST_HEAD(&cam->outqueue);
-	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
-	zc0301_queue_unusedframes(cam);
-
-	PDBGG("Frame #%lu, bytes read: %zu",
-	      (unsigned long)f->buf.index, count);
-
-	mutex_unlock(&cam->fileop_mutex);
-
-	return err ? err : count;
-}
-
-
-static unsigned int zc0301_poll(struct file *filp, poll_table *wait)
-{
-	struct zc0301_device *cam = video_drvdata(filp);
-	struct zc0301_frame_t* f;
-	unsigned long lock_flags;
-	unsigned int mask = 0;
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return POLLERR;
-
-	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present");
-		goto error;
-	}
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it "
-		       "again.");
-		goto error;
-	}
-
-	if (cam->io == IO_NONE) {
-		if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
-			DBG(1, "poll() failed, not enough memory");
-			goto error;
-		}
-		cam->io = IO_READ;
-		cam->stream = STREAM_ON;
-	}
-
-	if (cam->io == IO_READ) {
-		spin_lock_irqsave(&cam->queue_lock, lock_flags);
-		list_for_each_entry(f, &cam->outqueue, frame)
-			f->state = F_UNUSED;
-		INIT_LIST_HEAD(&cam->outqueue);
-		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-		zc0301_queue_unusedframes(cam);
-	}
-
-	poll_wait(filp, &cam->wait_frame, wait);
-
-	if (!list_empty(&cam->outqueue))
-		mask |= POLLIN | POLLRDNORM;
-
-	mutex_unlock(&cam->fileop_mutex);
-
-	return mask;
-
-error:
-	mutex_unlock(&cam->fileop_mutex);
-	return POLLERR;
-}
-
-
-static void zc0301_vm_open(struct vm_area_struct* vma)
-{
-	struct zc0301_frame_t* f = vma->vm_private_data;
-	f->vma_use_count++;
-}
-
-
-static void zc0301_vm_close(struct vm_area_struct* vma)
-{
-	/* NOTE: buffers are not freed here */
-	struct zc0301_frame_t* f = vma->vm_private_data;
-	f->vma_use_count--;
-}
-
-
-static const struct vm_operations_struct zc0301_vm_ops = {
-	.open = zc0301_vm_open,
-	.close = zc0301_vm_close,
-};
-
-
-static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma)
-{
-	struct zc0301_device *cam = video_drvdata(filp);
-	unsigned long size = vma->vm_end - vma->vm_start,
-		      start = vma->vm_start;
-	void *pos;
-	u32 i;
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return -ERESTARTSYS;
-
-	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present");
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it "
-		       "again.");
-		mutex_unlock(&cam->fileop_mutex);
-		return -EIO;
-	}
-
-	if (!(vma->vm_flags & (VM_WRITE | VM_READ))) {
-		mutex_unlock(&cam->fileop_mutex);
-		return -EACCES;
-	}
-
-	if (cam->io != IO_MMAP ||
-	    size != PAGE_ALIGN(cam->frame[0].buf.length)) {
-		mutex_unlock(&cam->fileop_mutex);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < cam->nbuffers; i++) {
-		if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
-			break;
-	}
-	if (i == cam->nbuffers) {
-		mutex_unlock(&cam->fileop_mutex);
-		return -EINVAL;
-	}
-
-	vma->vm_flags |= VM_IO;
-	vma->vm_flags |= VM_RESERVED;
-
-	pos = cam->frame[i].bufmem;
-	while (size > 0) { /* size is page-aligned */
-		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
-			mutex_unlock(&cam->fileop_mutex);
-			return -EAGAIN;
-		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	vma->vm_ops = &zc0301_vm_ops;
-	vma->vm_private_data = &cam->frame[i];
-	zc0301_vm_open(vma);
-
-	mutex_unlock(&cam->fileop_mutex);
-
-	return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_capability cap = {
-		.driver = "zc0301",
-		.version = ZC0301_MODULE_VERSION_CODE,
-		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
-				V4L2_CAP_STREAMING,
-	};
-
-	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
-	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
-		strlcpy(cap.bus_info, dev_name(&cam->usbdev->dev),
-			sizeof(cap.bus_info));
-
-	if (copy_to_user(arg, &cap, sizeof(cap)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_input i;
-
-	if (copy_from_user(&i, arg, sizeof(i)))
-		return -EFAULT;
-
-	if (i.index)
-		return -EINVAL;
-
-	memset(&i, 0, sizeof(i));
-	strcpy(i.name, "Camera");
-	i.type = V4L2_INPUT_TYPE_CAMERA;
-
-	if (copy_to_user(arg, &i, sizeof(i)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg)
-{
-	int index = 0;
-
-	if (copy_to_user(arg, &index, sizeof(index)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg)
-{
-	int index;
-
-	if (copy_from_user(&index, arg, sizeof(index)))
-		return -EFAULT;
-
-	if (index != 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_queryctrl qc;
-	u8 i;
-
-	if (copy_from_user(&qc, arg, sizeof(qc)))
-		return -EFAULT;
-
-	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
-		if (qc.id && qc.id == s->qctrl[i].id) {
-			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
-			if (copy_to_user(arg, &qc, sizeof(qc)))
-				return -EFAULT;
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-
-static int
-zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_control ctrl;
-	int err = 0;
-	u8 i;
-
-	if (!s->get_ctrl && !s->set_ctrl)
-		return -EINVAL;
-
-	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
-		return -EFAULT;
-
-	if (!s->get_ctrl) {
-		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
-			if (ctrl.id == s->qctrl[i].id) {
-				ctrl.value = s->_qctrl[i].default_value;
-				goto exit;
-			}
-		return -EINVAL;
-	} else
-		err = s->get_ctrl(cam, &ctrl);
-
-exit:
-	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
-		return -EFAULT;
-
-	return err;
-}
-
-
-static int
-zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_control ctrl;
-	u8 i;
-	int err = 0;
-
-	if (!s->set_ctrl)
-		return -EINVAL;
-
-	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
-		return -EFAULT;
-
-	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) {
-		if (ctrl.id == s->qctrl[i].id) {
-			if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
-				return -EINVAL;
-			if (ctrl.value < s->qctrl[i].minimum ||
-			    ctrl.value > s->qctrl[i].maximum)
-				return -ERANGE;
-			ctrl.value -= ctrl.value % s->qctrl[i].step;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(s->qctrl))
-		return -EINVAL;
-	if ((err = s->set_ctrl(cam, &ctrl)))
-		return err;
-
-	s->_qctrl[i].default_value = ctrl.value;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
-
-	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	cc->pixelaspect.numerator = 1;
-	cc->pixelaspect.denominator = 1;
-
-	if (copy_to_user(arg, cc, sizeof(*cc)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_crop crop = {
-		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-	};
-
-	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
-	if (copy_to_user(arg, &crop, sizeof(crop)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_crop crop;
-	struct v4l2_rect* rect;
-	struct v4l2_rect* bounds = &(s->cropcap.bounds);
-	const enum zc0301_stream_state stream = cam->stream;
-	const u32 nbuffers = cam->nbuffers;
-	u32 i;
-	int err = 0;
-
-	if (copy_from_user(&crop, arg, sizeof(crop)))
-		return -EFAULT;
-
-	rect = &(crop.c);
-
-	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	if (cam->module_param.force_munmap)
-		for (i = 0; i < cam->nbuffers; i++)
-			if (cam->frame[i].vma_use_count) {
-				DBG(3, "VIDIOC_S_CROP failed. "
-				       "Unmap the buffers first.");
-				return -EBUSY;
-			}
-
-	if (!s->set_crop) {
-		memcpy(rect, &(s->_rect), sizeof(*rect));
-		if (copy_to_user(arg, &crop, sizeof(crop)))
-			return -EFAULT;
-		return 0;
-	}
-
-	rect->left &= ~7L;
-	rect->top &= ~7L;
-	if (rect->width < 8)
-		rect->width = 8;
-	if (rect->height < 8)
-		rect->height = 8;
-	if (rect->width > bounds->width)
-		rect->width = bounds->width;
-	if (rect->height > bounds->height)
-		rect->height = bounds->height;
-	if (rect->left < bounds->left)
-		rect->left = bounds->left;
-	if (rect->top < bounds->top)
-		rect->top = bounds->top;
-	if (rect->left + rect->width > bounds->left + bounds->width)
-		rect->left = bounds->left+bounds->width - rect->width;
-	if (rect->top + rect->height > bounds->top + bounds->height)
-		rect->top = bounds->top+bounds->height - rect->height;
-	rect->width &= ~7L;
-	rect->height &= ~7L;
-
-	if (cam->stream == STREAM_ON)
-		if ((err = zc0301_stream_interrupt(cam)))
-			return err;
-
-	if (copy_to_user(arg, &crop, sizeof(crop))) {
-		cam->stream = stream;
-		return -EFAULT;
-	}
-
-	if (cam->module_param.force_munmap || cam->io == IO_READ)
-		zc0301_release_buffers(cam);
-
-	if (s->set_crop)
-		err += s->set_crop(cam, rect);
-
-	if (err) { /* atomic, no rollback in ioctl() */
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
-		       "use the camera, close and open %s again.",
-		    video_device_node_name(cam->v4ldev));
-		return -EIO;
-	}
-
-	s->pix_format.width = rect->width;
-	s->pix_format.height = rect->height;
-	memcpy(&(s->_rect), rect, sizeof(*rect));
-
-	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
-	    nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
-		       "use the camera, close and open %s again.",
-		    video_device_node_name(cam->v4ldev));
-		return -ENOMEM;
-	}
-
-	if (cam->io == IO_READ)
-		zc0301_empty_framequeues(cam);
-	else if (cam->module_param.force_munmap)
-		zc0301_requeue_outqueue(cam);
-
-	cam->stream = stream;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_framesizes(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_frmsizeenum frmsize;
-
-	if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
-		return -EFAULT;
-
-	if (frmsize.index != 0 && frmsize.index != 1)
-		return -EINVAL;
-
-	if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG)
-		return -EINVAL;
-
-	frmsize.type = V4L2_FRMSIZE_TYPE_DISCRETE;
-
-	if (frmsize.index == 1) {
-		frmsize.discrete.width = cam->sensor.cropcap.defrect.width;
-		frmsize.discrete.height = cam->sensor.cropcap.defrect.height;
-	}
-	memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
-
-	if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_fmtdesc fmtd;
-
-	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
-		return -EFAULT;
-
-	if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	if (fmtd.index == 0) {
-		strcpy(fmtd.description, "JPEG");
-		fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
-		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
-	} else
-		return -EINVAL;
-
-	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
-	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_format format;
-	struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
-
-	if (copy_from_user(&format, arg, sizeof(format)))
-		return -EFAULT;
-
-	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	pfmt->bytesperline = 0;
-	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
-	pfmt->field = V4L2_FIELD_NONE;
-	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
-	if (copy_to_user(arg, &format, sizeof(format)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
-			void __user * arg)
-{
-	struct zc0301_sensor* s = &cam->sensor;
-	struct v4l2_format format;
-	struct v4l2_pix_format* pix;
-	struct v4l2_pix_format* pfmt = &(s->pix_format);
-	struct v4l2_rect* bounds = &(s->cropcap.bounds);
-	struct v4l2_rect rect;
-	const enum zc0301_stream_state stream = cam->stream;
-	const u32 nbuffers = cam->nbuffers;
-	u32 i;
-	int err = 0;
-
-	if (copy_from_user(&format, arg, sizeof(format)))
-		return -EFAULT;
-
-	pix = &(format.fmt.pix);
-
-	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	memcpy(&rect, &(s->_rect), sizeof(rect));
-
-	if (!s->set_crop) {
-		pix->width = rect.width;
-		pix->height = rect.height;
-	} else {
-		rect.width = pix->width;
-		rect.height = pix->height;
-	}
-
-	if (rect.width < 8)
-		rect.width = 8;
-	if (rect.height < 8)
-		rect.height = 8;
-	if (rect.width > bounds->left + bounds->width - rect.left)
-		rect.width = bounds->left + bounds->width - rect.left;
-	if (rect.height > bounds->top + bounds->height - rect.top)
-		rect.height = bounds->top + bounds->height - rect.top;
-	rect.width &= ~7L;
-	rect.height &= ~7L;
-
-	pix->width = rect.width;
-	pix->height = rect.height;
-	pix->pixelformat = pfmt->pixelformat;
-	pix->priv = pfmt->priv;
-	pix->colorspace = pfmt->colorspace;
-	pix->bytesperline = 0;
-	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
-	pix->field = V4L2_FIELD_NONE;
-
-	if (cmd == VIDIOC_TRY_FMT) {
-		if (copy_to_user(arg, &format, sizeof(format)))
-			return -EFAULT;
-		return 0;
-	}
-
-	if (cam->module_param.force_munmap)
-		for (i = 0; i < cam->nbuffers; i++)
-			if (cam->frame[i].vma_use_count) {
-				DBG(3, "VIDIOC_S_FMT failed. "
-				       "Unmap the buffers first.");
-				return -EBUSY;
-			}
-
-	if (cam->stream == STREAM_ON)
-		if ((err = zc0301_stream_interrupt(cam)))
-			return err;
-
-	if (copy_to_user(arg, &format, sizeof(format))) {
-		cam->stream = stream;
-		return -EFAULT;
-	}
-
-	if (cam->module_param.force_munmap || cam->io == IO_READ)
-		zc0301_release_buffers(cam);
-
-	if (s->set_crop)
-		err += s->set_crop(cam, &rect);
-
-	if (err) { /* atomic, no rollback in ioctl() */
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
-		       "use the camera, close and open %s again.",
-		    video_device_node_name(cam->v4ldev));
-		return -EIO;
-	}
-
-	memcpy(pfmt, pix, sizeof(*pix));
-	memcpy(&(s->_rect), &rect, sizeof(rect));
-
-	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
-	    nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
-		       "use the camera, close and open %s again.",
-		    video_device_node_name(cam->v4ldev));
-		return -ENOMEM;
-	}
-
-	if (cam->io == IO_READ)
-		zc0301_empty_framequeues(cam);
-	else if (cam->module_param.force_munmap)
-		zc0301_requeue_outqueue(cam);
-
-	cam->stream = stream;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
-	if (copy_to_user(arg, &cam->compression, sizeof(cam->compression)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_jpegcompression jc;
-	const enum zc0301_stream_state stream = cam->stream;
-	int err = 0;
-
-	if (copy_from_user(&jc, arg, sizeof(jc)))
-		return -EFAULT;
-
-	if (jc.quality != 0)
-		return -EINVAL;
-
-	if (cam->stream == STREAM_ON)
-		if ((err = zc0301_stream_interrupt(cam)))
-			return err;
-
-	err += zc0301_set_compression(cam, &jc);
-	if (err) { /* atomic, no rollback in ioctl() */
-		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
-		       "problems. To use the camera, close and open %s again.",
-		       video_device_node_name(cam->v4ldev));
-		return -EIO;
-	}
-
-	cam->compression.quality = jc.quality;
-
-	cam->stream = stream;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_requestbuffers rb;
-	u32 i;
-	int err;
-
-	if (copy_from_user(&rb, arg, sizeof(rb)))
-		return -EFAULT;
-
-	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	    rb.memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
-
-	if (cam->io == IO_READ) {
-		DBG(3, "Close and open the device again to choose the mmap "
-		       "I/O method");
-		return -EBUSY;
-	}
-
-	for (i = 0; i < cam->nbuffers; i++)
-		if (cam->frame[i].vma_use_count) {
-			DBG(3, "VIDIOC_REQBUFS failed. "
-			       "Previous buffers are still mapped.");
-			return -EBUSY;
-		}
-
-	if (cam->stream == STREAM_ON)
-		if ((err = zc0301_stream_interrupt(cam)))
-			return err;
-
-	zc0301_empty_framequeues(cam);
-
-	zc0301_release_buffers(cam);
-	if (rb.count)
-		rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP);
-
-	if (copy_to_user(arg, &rb, sizeof(rb))) {
-		zc0301_release_buffers(cam);
-		cam->io = IO_NONE;
-		return -EFAULT;
-	}
-
-	cam->io = rb.count ? IO_MMAP : IO_NONE;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_buffer b;
-
-	if (copy_from_user(&b, arg, sizeof(b)))
-		return -EFAULT;
-
-	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
-		return -EINVAL;
-
-	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
-	if (cam->frame[b.index].vma_use_count)
-		b.flags |= V4L2_BUF_FLAG_MAPPED;
-
-	if (cam->frame[b.index].state == F_DONE)
-		b.flags |= V4L2_BUF_FLAG_DONE;
-	else if (cam->frame[b.index].state != F_UNUSED)
-		b.flags |= V4L2_BUF_FLAG_QUEUED;
-
-	if (copy_to_user(arg, &b, sizeof(b)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_buffer b;
-	unsigned long lock_flags;
-
-	if (copy_from_user(&b, arg, sizeof(b)))
-		return -EFAULT;
-
-	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
-		return -EINVAL;
-
-	if (cam->frame[b.index].state != F_UNUSED)
-		return -EINVAL;
-
-	cam->frame[b.index].state = F_QUEUED;
-
-	spin_lock_irqsave(&cam->queue_lock, lock_flags);
-	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
-	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
-	PDBGG("Frame #%lu queued", (unsigned long)b.index);
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp,
-		    void __user * arg)
-{
-	struct v4l2_buffer b;
-	struct zc0301_frame_t *f;
-	unsigned long lock_flags;
-	long timeout;
-
-	if (copy_from_user(&b, arg, sizeof(b)))
-		return -EFAULT;
-
-	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
-		return -EINVAL;
-
-	if (list_empty(&cam->outqueue)) {
-		if (cam->stream == STREAM_OFF)
-			return -EINVAL;
-		if (filp->f_flags & O_NONBLOCK)
-			return -EAGAIN;
-		timeout = wait_event_interruptible_timeout
-			  ( cam->wait_frame,
-			    (!list_empty(&cam->outqueue)) ||
-			    (cam->state & DEV_DISCONNECTED) ||
-			    (cam->state & DEV_MISCONFIGURED),
-			    cam->module_param.frame_timeout *
-			    1000 * msecs_to_jiffies(1) );
-		if (timeout < 0)
-			return timeout;
-		if (cam->state & DEV_DISCONNECTED)
-			return -ENODEV;
-		if (!timeout || (cam->state & DEV_MISCONFIGURED))
-			return -EIO;
-	}
-
-	spin_lock_irqsave(&cam->queue_lock, lock_flags);
-	f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame);
-	list_del(cam->outqueue.next);
-	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
-	f->state = F_UNUSED;
-
-	memcpy(&b, &f->buf, sizeof(b));
-	if (f->vma_use_count)
-		b.flags |= V4L2_BUF_FLAG_MAPPED;
-
-	if (copy_to_user(arg, &b, sizeof(b)))
-		return -EFAULT;
-
-	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg)
-{
-	int type;
-
-	if (copy_from_user(&type, arg, sizeof(type)))
-		return -EFAULT;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
-		return -EINVAL;
-
-	cam->stream = STREAM_ON;
-
-	DBG(3, "Stream on");
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg)
-{
-	int type, err;
-
-	if (copy_from_user(&type, arg, sizeof(type)))
-		return -EFAULT;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
-		return -EINVAL;
-
-	if (cam->stream == STREAM_ON)
-		if ((err = zc0301_stream_interrupt(cam)))
-			return err;
-
-	zc0301_empty_framequeues(cam);
-
-	DBG(3, "Stream off");
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_streamparm sp;
-
-	if (copy_from_user(&sp, arg, sizeof(sp)))
-		return -EFAULT;
-
-	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	sp.parm.capture.extendedmode = 0;
-	sp.parm.capture.readbuffers = cam->nreadbuffers;
-
-	if (copy_to_user(arg, &sp, sizeof(sp)))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int
-zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg)
-{
-	struct v4l2_streamparm sp;
-
-	if (copy_from_user(&sp, arg, sizeof(sp)))
-		return -EFAULT;
-
-	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	sp.parm.capture.extendedmode = 0;
-
-	if (sp.parm.capture.readbuffers == 0)
-		sp.parm.capture.readbuffers = cam->nreadbuffers;
-
-	if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES)
-		sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES;
-
-	if (copy_to_user(arg, &sp, sizeof(sp)))
-		return -EFAULT;
-
-	cam->nreadbuffers = sp.parm.capture.readbuffers;
-
-	return 0;
-}
-
-
-static long zc0301_ioctl_v4l2(struct file *filp,
-			     unsigned int cmd, void __user *arg)
-{
-	struct zc0301_device *cam = video_drvdata(filp);
-
-	switch (cmd) {
-
-	case VIDIOC_QUERYCAP:
-		return zc0301_vidioc_querycap(cam, arg);
-
-	case VIDIOC_ENUMINPUT:
-		return zc0301_vidioc_enuminput(cam, arg);
-
-	case VIDIOC_G_INPUT:
-		return zc0301_vidioc_g_input(cam, arg);
-
-	case VIDIOC_S_INPUT:
-		return zc0301_vidioc_s_input(cam, arg);
-
-	case VIDIOC_QUERYCTRL:
-		return zc0301_vidioc_query_ctrl(cam, arg);
-
-	case VIDIOC_G_CTRL:
-		return zc0301_vidioc_g_ctrl(cam, arg);
-
-	case VIDIOC_S_CTRL:
-		return zc0301_vidioc_s_ctrl(cam, arg);
-
-	case VIDIOC_CROPCAP:
-		return zc0301_vidioc_cropcap(cam, arg);
-
-	case VIDIOC_G_CROP:
-		return zc0301_vidioc_g_crop(cam, arg);
-
-	case VIDIOC_S_CROP:
-		return zc0301_vidioc_s_crop(cam, arg);
-
-	case VIDIOC_ENUM_FMT:
-		return zc0301_vidioc_enum_fmt(cam, arg);
-
-	case VIDIOC_G_FMT:
-		return zc0301_vidioc_g_fmt(cam, arg);
-
-	case VIDIOC_TRY_FMT:
-	case VIDIOC_S_FMT:
-		return zc0301_vidioc_try_s_fmt(cam, cmd, arg);
-
-	case VIDIOC_ENUM_FRAMESIZES:
-		return zc0301_vidioc_enum_framesizes(cam, arg);
-
-	case VIDIOC_G_JPEGCOMP:
-		return zc0301_vidioc_g_jpegcomp(cam, arg);
-
-	case VIDIOC_S_JPEGCOMP:
-		return zc0301_vidioc_s_jpegcomp(cam, arg);
-
-	case VIDIOC_REQBUFS:
-		return zc0301_vidioc_reqbufs(cam, arg);
-
-	case VIDIOC_QUERYBUF:
-		return zc0301_vidioc_querybuf(cam, arg);
-
-	case VIDIOC_QBUF:
-		return zc0301_vidioc_qbuf(cam, arg);
-
-	case VIDIOC_DQBUF:
-		return zc0301_vidioc_dqbuf(cam, filp, arg);
-
-	case VIDIOC_STREAMON:
-		return zc0301_vidioc_streamon(cam, arg);
-
-	case VIDIOC_STREAMOFF:
-		return zc0301_vidioc_streamoff(cam, arg);
-
-	case VIDIOC_G_PARM:
-		return zc0301_vidioc_g_parm(cam, arg);
-
-	case VIDIOC_S_PARM:
-		return zc0301_vidioc_s_parm(cam, arg);
-
-	case VIDIOC_G_STD:
-	case VIDIOC_S_STD:
-	case VIDIOC_QUERYSTD:
-	case VIDIOC_ENUMSTD:
-	case VIDIOC_QUERYMENU:
-	case VIDIOC_ENUM_FRAMEINTERVALS:
-		return -EINVAL;
-
-	default:
-		return -EINVAL;
-
-	}
-}
-
-
-static long zc0301_ioctl(struct file *filp,
-			unsigned int cmd, unsigned long arg)
-{
-	struct zc0301_device *cam = video_drvdata(filp);
-	int err = 0;
-
-	if (mutex_lock_interruptible(&cam->fileop_mutex))
-		return -ERESTARTSYS;
-
-	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present");
-		mutex_unlock(&cam->fileop_mutex);
-		return -ENODEV;
-	}
-
-	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it "
-		       "again.");
-		mutex_unlock(&cam->fileop_mutex);
-		return -EIO;
-	}
-
-	V4LDBG(3, "zc0301", cmd);
-
-	err = zc0301_ioctl_v4l2(filp, cmd, (void __user *)arg);
-
-	mutex_unlock(&cam->fileop_mutex);
-
-	return err;
-}
-
-
-static const struct v4l2_file_operations zc0301_fops = {
-	.owner =   THIS_MODULE,
-	.open =    zc0301_open,
-	.release = zc0301_release,
-	.ioctl =   zc0301_ioctl,
-	.read =    zc0301_read,
-	.poll =    zc0301_poll,
-	.mmap =    zc0301_mmap,
-};
-
-/*****************************************************************************/
-
-static int
-zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct zc0301_device* cam;
-	static unsigned int dev_nr;
-	unsigned int i;
-	int err = 0;
-
-	if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL)))
-		return -ENOMEM;
-
-	cam->usbdev = udev;
-
-	if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) {
-		DBG(1, "kmalloc() failed");
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	if (!(cam->v4ldev = video_device_alloc())) {
-		DBG(1, "video_device_alloc() failed");
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	DBG(2, "ZC0301[P] Image Processor and Control Chip detected "
-	       "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct);
-
-	for  (i = 0; zc0301_sensor_table[i]; i++) {
-		err = zc0301_sensor_table[i](cam);
-		if (!err)
-			break;
-	}
-
-	if (!err)
-		DBG(2, "%s image sensor detected", cam->sensor.name);
-	else {
-		DBG(1, "No supported image sensor detected");
-		err = -ENODEV;
-		goto fail;
-	}
-
-	if (zc0301_init(cam)) {
-		DBG(1, "Initialization failed. I will retry on open().");
-		cam->state |= DEV_MISCONFIGURED;
-	}
-
-	strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera");
-	cam->v4ldev->fops = &zc0301_fops;
-	cam->v4ldev->release = video_device_release;
-	cam->v4ldev->parent = &udev->dev;
-	video_set_drvdata(cam->v4ldev, cam);
-
-	init_completion(&cam->probe);
-
-	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
-				    video_nr[dev_nr]);
-	if (err) {
-		DBG(1, "V4L2 device registration failed");
-		if (err == -ENFILE && video_nr[dev_nr] == -1)
-			DBG(1, "Free /dev/videoX node not found");
-		video_nr[dev_nr] = -1;
-		dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
-		complete_all(&cam->probe);
-		goto fail;
-	}
-
-	DBG(2, "V4L2 device registered as %s",
-	    video_device_node_name(cam->v4ldev));
-
-	cam->module_param.force_munmap = force_munmap[dev_nr];
-	cam->module_param.frame_timeout = frame_timeout[dev_nr];
-
-	dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
-
-	usb_set_intfdata(intf, cam);
-	kref_init(&cam->kref);
-	usb_get_dev(cam->usbdev);
-
-	complete_all(&cam->probe);
-
-	return 0;
-
-fail:
-	if (cam) {
-		kfree(cam->control_buffer);
-		if (cam->v4ldev)
-			video_device_release(cam->v4ldev);
-		kfree(cam);
-	}
-	return err;
-}
-
-
-static void zc0301_usb_disconnect(struct usb_interface* intf)
-{
-	struct zc0301_device* cam;
-
-	down_write(&zc0301_dev_lock);
-
-	cam = usb_get_intfdata(intf);
-
-	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
-
-	if (cam->users) {
-		DBG(2, "Device %s is open! Deregistration and "
-		       "memory deallocation are deferred.",
-		    video_device_node_name(cam->v4ldev));
-		cam->state |= DEV_MISCONFIGURED;
-		zc0301_stop_transfer(cam);
-		cam->state |= DEV_DISCONNECTED;
-		wake_up_interruptible(&cam->wait_frame);
-		wake_up(&cam->wait_stream);
-	} else
-		cam->state |= DEV_DISCONNECTED;
-
-	wake_up_interruptible_all(&cam->wait_open);
-
-	kref_put(&cam->kref, zc0301_release_resources);
-
-	up_write(&zc0301_dev_lock);
-}
-
-
-static struct usb_driver zc0301_usb_driver = {
-	.name =       "zc0301",
-	.id_table =   zc0301_id_table,
-	.probe =      zc0301_usb_probe,
-	.disconnect = zc0301_usb_disconnect,
-};
-
-/*****************************************************************************/
-
-static int __init zc0301_module_init(void)
-{
-	int err = 0;
-
-	KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION);
-	KDBG(3, ZC0301_MODULE_AUTHOR);
-
-	if ((err = usb_register(&zc0301_usb_driver)))
-		KDBG(1, "usb_register() failed");
-
-	return err;
-}
-
-
-static void __exit zc0301_module_exit(void)
-{
-	usb_deregister(&zc0301_usb_driver);
-}
-
-
-module_init(zc0301_module_init);
-module_exit(zc0301_module_exit);
diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c
deleted file mode 100644
index 24b0dfba357..00000000000
--- a/drivers/media/video/zc0301/zc0301_pas202bcb.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/***************************************************************************
- * Plug-in for PAS202BCB image sensor connected to the ZC0301 Image        *
- * Processor and Control Chip                                              *
- *                                                                         *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr>                   *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-/*
-   NOTE: Sensor controls are disabled for now, becouse changing them while
-	 streaming sometimes results in out-of-sync video frames. We'll use
-	 the default initialization, until we know how to stop and start video
-	 in the chip. However, the image quality still looks good under various
-	 light conditions.
-*/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pas202bcb;
-
-
-static int pas202bcb_init(struct zc0301_device* cam)
-{
-	int err = 0;
-
-	err += zc0301_write_reg(cam, 0x0002, 0x00);
-	err += zc0301_write_reg(cam, 0x0003, 0x02);
-	err += zc0301_write_reg(cam, 0x0004, 0x80);
-	err += zc0301_write_reg(cam, 0x0005, 0x01);
-	err += zc0301_write_reg(cam, 0x0006, 0xE0);
-	err += zc0301_write_reg(cam, 0x0098, 0x00);
-	err += zc0301_write_reg(cam, 0x009A, 0x03);
-	err += zc0301_write_reg(cam, 0x011A, 0x00);
-	err += zc0301_write_reg(cam, 0x011C, 0x03);
-	err += zc0301_write_reg(cam, 0x009B, 0x01);
-	err += zc0301_write_reg(cam, 0x009C, 0xE6);
-	err += zc0301_write_reg(cam, 0x009D, 0x02);
-	err += zc0301_write_reg(cam, 0x009E, 0x86);
-
-	err += zc0301_i2c_write(cam, 0x02, 0x02);
-	err += zc0301_i2c_write(cam, 0x0A, 0x01);
-	err += zc0301_i2c_write(cam, 0x0B, 0x01);
-	err += zc0301_i2c_write(cam, 0x0D, 0x00);
-	err += zc0301_i2c_write(cam, 0x12, 0x05);
-	err += zc0301_i2c_write(cam, 0x13, 0x63);
-	err += zc0301_i2c_write(cam, 0x15, 0x70);
-
-	err += zc0301_write_reg(cam, 0x0101, 0xB7);
-	err += zc0301_write_reg(cam, 0x0100, 0x0D);
-	err += zc0301_write_reg(cam, 0x0189, 0x06);
-	err += zc0301_write_reg(cam, 0x01AD, 0x00);
-	err += zc0301_write_reg(cam, 0x01C5, 0x03);
-	err += zc0301_write_reg(cam, 0x01CB, 0x13);
-	err += zc0301_write_reg(cam, 0x0250, 0x08);
-	err += zc0301_write_reg(cam, 0x0301, 0x08);
-	err += zc0301_write_reg(cam, 0x018D, 0x70);
-	err += zc0301_write_reg(cam, 0x0008, 0x03);
-	err += zc0301_write_reg(cam, 0x01C6, 0x04);
-	err += zc0301_write_reg(cam, 0x01CB, 0x07);
-	err += zc0301_write_reg(cam, 0x0120, 0x11);
-	err += zc0301_write_reg(cam, 0x0121, 0x37);
-	err += zc0301_write_reg(cam, 0x0122, 0x58);
-	err += zc0301_write_reg(cam, 0x0123, 0x79);
-	err += zc0301_write_reg(cam, 0x0124, 0x91);
-	err += zc0301_write_reg(cam, 0x0125, 0xA6);
-	err += zc0301_write_reg(cam, 0x0126, 0xB8);
-	err += zc0301_write_reg(cam, 0x0127, 0xC7);
-	err += zc0301_write_reg(cam, 0x0128, 0xD3);
-	err += zc0301_write_reg(cam, 0x0129, 0xDE);
-	err += zc0301_write_reg(cam, 0x012A, 0xE6);
-	err += zc0301_write_reg(cam, 0x012B, 0xED);
-	err += zc0301_write_reg(cam, 0x012C, 0xF3);
-	err += zc0301_write_reg(cam, 0x012D, 0xF8);
-	err += zc0301_write_reg(cam, 0x012E, 0xFB);
-	err += zc0301_write_reg(cam, 0x012F, 0xFF);
-	err += zc0301_write_reg(cam, 0x0130, 0x26);
-	err += zc0301_write_reg(cam, 0x0131, 0x23);
-	err += zc0301_write_reg(cam, 0x0132, 0x20);
-	err += zc0301_write_reg(cam, 0x0133, 0x1C);
-	err += zc0301_write_reg(cam, 0x0134, 0x16);
-	err += zc0301_write_reg(cam, 0x0135, 0x13);
-	err += zc0301_write_reg(cam, 0x0136, 0x10);
-	err += zc0301_write_reg(cam, 0x0137, 0x0D);
-	err += zc0301_write_reg(cam, 0x0138, 0x0B);
-	err += zc0301_write_reg(cam, 0x0139, 0x09);
-	err += zc0301_write_reg(cam, 0x013A, 0x07);
-	err += zc0301_write_reg(cam, 0x013B, 0x06);
-	err += zc0301_write_reg(cam, 0x013C, 0x05);
-	err += zc0301_write_reg(cam, 0x013D, 0x04);
-	err += zc0301_write_reg(cam, 0x013E, 0x03);
-	err += zc0301_write_reg(cam, 0x013F, 0x02);
-	err += zc0301_write_reg(cam, 0x010A, 0x4C);
-	err += zc0301_write_reg(cam, 0x010B, 0xF5);
-	err += zc0301_write_reg(cam, 0x010C, 0xFF);
-	err += zc0301_write_reg(cam, 0x010D, 0xF9);
-	err += zc0301_write_reg(cam, 0x010E, 0x51);
-	err += zc0301_write_reg(cam, 0x010F, 0xF5);
-	err += zc0301_write_reg(cam, 0x0110, 0xFB);
-	err += zc0301_write_reg(cam, 0x0111, 0xED);
-	err += zc0301_write_reg(cam, 0x0112, 0x5F);
-	err += zc0301_write_reg(cam, 0x0180, 0x00);
-	err += zc0301_write_reg(cam, 0x0019, 0x00);
-	err += zc0301_write_reg(cam, 0x0087, 0x20);
-	err += zc0301_write_reg(cam, 0x0088, 0x21);
-
-	err += zc0301_i2c_write(cam, 0x20, 0x02);
-	err += zc0301_i2c_write(cam, 0x21, 0x1B);
-	err += zc0301_i2c_write(cam, 0x03, 0x44);
-	err += zc0301_i2c_write(cam, 0x0E, 0x01);
-	err += zc0301_i2c_write(cam, 0x0F, 0x00);
-
-	err += zc0301_write_reg(cam, 0x01A9, 0x14);
-	err += zc0301_write_reg(cam, 0x01AA, 0x24);
-	err += zc0301_write_reg(cam, 0x0190, 0x00);
-	err += zc0301_write_reg(cam, 0x0191, 0x02);
-	err += zc0301_write_reg(cam, 0x0192, 0x1B);
-	err += zc0301_write_reg(cam, 0x0195, 0x00);
-	err += zc0301_write_reg(cam, 0x0196, 0x00);
-	err += zc0301_write_reg(cam, 0x0197, 0x4D);
-	err += zc0301_write_reg(cam, 0x018C, 0x10);
-	err += zc0301_write_reg(cam, 0x018F, 0x20);
-	err += zc0301_write_reg(cam, 0x001D, 0x44);
-	err += zc0301_write_reg(cam, 0x001E, 0x6F);
-	err += zc0301_write_reg(cam, 0x001F, 0xAD);
-	err += zc0301_write_reg(cam, 0x0020, 0xEB);
-	err += zc0301_write_reg(cam, 0x0087, 0x0F);
-	err += zc0301_write_reg(cam, 0x0088, 0x0E);
-	err += zc0301_write_reg(cam, 0x0180, 0x40);
-	err += zc0301_write_reg(cam, 0x0192, 0x1B);
-	err += zc0301_write_reg(cam, 0x0191, 0x02);
-	err += zc0301_write_reg(cam, 0x0190, 0x00);
-	err += zc0301_write_reg(cam, 0x0116, 0x1D);
-	err += zc0301_write_reg(cam, 0x0117, 0x40);
-	err += zc0301_write_reg(cam, 0x0118, 0x99);
-	err += zc0301_write_reg(cam, 0x0180, 0x42);
-	err += zc0301_write_reg(cam, 0x0116, 0x1D);
-	err += zc0301_write_reg(cam, 0x0117, 0x40);
-	err += zc0301_write_reg(cam, 0x0118, 0x99);
-	err += zc0301_write_reg(cam, 0x0007, 0x00);
-
-	err += zc0301_i2c_write(cam, 0x11, 0x01);
-
-	msleep(100);
-
-	return err;
-}
-
-
-static int pas202bcb_get_ctrl(struct zc0301_device* cam,
-			      struct v4l2_control* ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE:
-		{
-			int r1 = zc0301_i2c_read(cam, 0x04, 1),
-			    r2 = zc0301_i2c_read(cam, 0x05, 1);
-			if (r1 < 0 || r2 < 0)
-				return -EIO;
-			ctrl->value = (r1 << 6) | (r2 & 0x3f);
-		}
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0)
-			return -EIO;
-		ctrl->value &= 0x0f;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0)
-			return -EIO;
-		ctrl->value &= 0x0f;
-		return 0;
-	case V4L2_CID_GAIN:
-		if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0)
-			return -EIO;
-		ctrl->value &= 0x1f;
-		return 0;
-	case ZC0301_V4L2_CID_GREEN_BALANCE:
-		if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0)
-			return -EIO;
-		ctrl->value &= 0x0f;
-		return 0;
-	case ZC0301_V4L2_CID_DAC_MAGNITUDE:
-		if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0)
-			return -EIO;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-
-static int pas202bcb_set_ctrl(struct zc0301_device* cam,
-			      const struct v4l2_control* ctrl)
-{
-	int err = 0;
-
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE:
-		err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6);
-		err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		err += zc0301_i2c_write(cam, 0x09, ctrl->value);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		err += zc0301_i2c_write(cam, 0x07, ctrl->value);
-		break;
-	case V4L2_CID_GAIN:
-		err += zc0301_i2c_write(cam, 0x10, ctrl->value);
-		break;
-	case ZC0301_V4L2_CID_GREEN_BALANCE:
-		err += zc0301_i2c_write(cam, 0x08, ctrl->value);
-		break;
-	case ZC0301_V4L2_CID_DAC_MAGNITUDE:
-		err += zc0301_i2c_write(cam, 0x0c, ctrl->value);
-		break;
-	default:
-		return -EINVAL;
-	}
-	err += zc0301_i2c_write(cam, 0x11, 0x01);
-
-	return err ? -EIO : 0;
-}
-
-
-static struct zc0301_sensor pas202bcb = {
-	.name = "PAS202BCB",
-	.init = &pas202bcb_init,
-	.qctrl = {
-		{
-			.id = V4L2_CID_EXPOSURE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "exposure",
-			.minimum = 0x01e5,
-			.maximum = 0x3fff,
-			.step = 0x0001,
-			.default_value = 0x01e5,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-		{
-			.id = V4L2_CID_GAIN,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "global gain",
-			.minimum = 0x00,
-			.maximum = 0x1f,
-			.step = 0x01,
-			.default_value = 0x0c,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-		{
-			.id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "DAC magnitude",
-			.minimum = 0x00,
-			.maximum = 0xff,
-			.step = 0x01,
-			.default_value = 0x00,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-		{
-			.id = V4L2_CID_RED_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "red balance",
-			.minimum = 0x00,
-			.maximum = 0x0f,
-			.step = 0x01,
-			.default_value = 0x01,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-		{
-			.id = V4L2_CID_BLUE_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "blue balance",
-			.minimum = 0x00,
-			.maximum = 0x0f,
-			.step = 0x01,
-			.default_value = 0x05,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-		{
-			.id = ZC0301_V4L2_CID_GREEN_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "green balance",
-			.minimum = 0x00,
-			.maximum = 0x0f,
-			.step = 0x01,
-			.default_value = 0x00,
-			.flags = V4L2_CTRL_FLAG_DISABLED,
-		},
-	},
-	.get_ctrl = &pas202bcb_get_ctrl,
-	.set_ctrl = &pas202bcb_set_ctrl,
-	.cropcap = {
-		.bounds = {
-			.left = 0,
-			.top = 0,
-			.width = 640,
-			.height = 480,
-		},
-		.defrect = {
-			.left = 0,
-			.top = 0,
-			.width = 640,
-			.height = 480,
-		},
-	},
-	.pix_format = {
-		.width = 640,
-		.height = 480,
-		.pixelformat = V4L2_PIX_FMT_JPEG,
-		.priv = 8,
-		.colorspace = V4L2_COLORSPACE_JPEG,
-	},
-};
-
-
-int zc0301_probe_pas202bcb(struct zc0301_device* cam)
-{
-	int r0 = 0, r1 = 0, err = 0;
-	unsigned int pid = 0;
-
-	err += zc0301_write_reg(cam, 0x0000, 0x01);
-	err += zc0301_write_reg(cam, 0x0010, 0x0e);
-	err += zc0301_write_reg(cam, 0x0001, 0x01);
-	err += zc0301_write_reg(cam, 0x0012, 0x03);
-	err += zc0301_write_reg(cam, 0x0012, 0x01);
-	err += zc0301_write_reg(cam, 0x008d, 0x08);
-
-	msleep(10);
-
-	r0 = zc0301_i2c_read(cam, 0x00, 1);
-	r1 = zc0301_i2c_read(cam, 0x01, 1);
-
-	if (r0 < 0 || r1 < 0 || err)
-		return -EIO;
-
-	pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
-	if (pid != 0x017)
-		return -ENODEV;
-
-	zc0301_attach_sensor(cam, &pas202bcb);
-
-	return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_pb0330.c b/drivers/media/video/zc0301/zc0301_pb0330.c
deleted file mode 100644
index 9519aba3612..00000000000
--- a/drivers/media/video/zc0301/zc0301_pb0330.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/***************************************************************************
- * Plug-in for PB-0330 image sensor connected to the ZC0301P Image         *
- * Processor and Control Chip                                              *
- *                                                                         *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr>                   *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pb0330;
-
-
-static int pb0330_init(struct zc0301_device* cam)
-{
-	int err = 0;
-
-	err += zc0301_write_reg(cam, 0x0000, 0x01);
-	err += zc0301_write_reg(cam, 0x0008, 0x03);
-	err += zc0301_write_reg(cam, 0x0010, 0x0A);
-	err += zc0301_write_reg(cam, 0x0002, 0x00);
-	err += zc0301_write_reg(cam, 0x0003, 0x02);
-	err += zc0301_write_reg(cam, 0x0004, 0x80);
-	err += zc0301_write_reg(cam, 0x0005, 0x01);
-	err += zc0301_write_reg(cam, 0x0006, 0xE0);
-	err += zc0301_write_reg(cam, 0x0001, 0x01);
-	err += zc0301_write_reg(cam, 0x0012, 0x05);
-	err += zc0301_write_reg(cam, 0x0012, 0x07);
-	err += zc0301_write_reg(cam, 0x0098, 0x00);
-	err += zc0301_write_reg(cam, 0x009A, 0x00);
-	err += zc0301_write_reg(cam, 0x011A, 0x00);
-	err += zc0301_write_reg(cam, 0x011C, 0x00);
-	err += zc0301_write_reg(cam, 0x0012, 0x05);
-
-	err += zc0301_i2c_write(cam, 0x01, 0x0006);
-	err += zc0301_i2c_write(cam, 0x02, 0x0011);
-	err += zc0301_i2c_write(cam, 0x03, 0x01E7);
-	err += zc0301_i2c_write(cam, 0x04, 0x0287);
-	err += zc0301_i2c_write(cam, 0x06, 0x0003);
-	err += zc0301_i2c_write(cam, 0x07, 0x3002);
-	err += zc0301_i2c_write(cam, 0x20, 0x1100);
-	err += zc0301_i2c_write(cam, 0x2F, 0xF7B0);
-	err += zc0301_i2c_write(cam, 0x30, 0x0005);
-	err += zc0301_i2c_write(cam, 0x31, 0x0000);
-	err += zc0301_i2c_write(cam, 0x34, 0x0100);
-	err += zc0301_i2c_write(cam, 0x35, 0x0060);
-	err += zc0301_i2c_write(cam, 0x3D, 0x068F);
-	err += zc0301_i2c_write(cam, 0x40, 0x01E0);
-	err += zc0301_i2c_write(cam, 0x58, 0x0078);
-	err += zc0301_i2c_write(cam, 0x62, 0x0411);
-
-	err += zc0301_write_reg(cam, 0x0087, 0x10);
-	err += zc0301_write_reg(cam, 0x0101, 0x37);
-	err += zc0301_write_reg(cam, 0x0012, 0x05);
-	err += zc0301_write_reg(cam, 0x0100, 0x0D);
-	err += zc0301_write_reg(cam, 0x0189, 0x06);
-	err += zc0301_write_reg(cam, 0x01AD, 0x00);
-	err += zc0301_write_reg(cam, 0x01C5, 0x03);
-	err += zc0301_write_reg(cam, 0x01CB, 0x13);
-	err += zc0301_write_reg(cam, 0x0250, 0x08);
-	err += zc0301_write_reg(cam, 0x0301, 0x08);
-	err += zc0301_write_reg(cam, 0x01A8, 0x60);
-	err += zc0301_write_reg(cam, 0x018D, 0x6C);
-	err += zc0301_write_reg(cam, 0x01AD, 0x09);
-	err += zc0301_write_reg(cam, 0x01AE, 0x15);
-	err += zc0301_write_reg(cam, 0x010A, 0x50);
-	err += zc0301_write_reg(cam, 0x010B, 0xF8);
-	err += zc0301_write_reg(cam, 0x010C, 0xF8);
-	err += zc0301_write_reg(cam, 0x010D, 0xF8);
-	err += zc0301_write_reg(cam, 0x010E, 0x50);
-	err += zc0301_write_reg(cam, 0x010F, 0xF8);
-	err += zc0301_write_reg(cam, 0x0110, 0xF8);
-	err += zc0301_write_reg(cam, 0x0111, 0xF8);
-	err += zc0301_write_reg(cam, 0x0112, 0x50);
-	err += zc0301_write_reg(cam, 0x0008, 0x03);
-	err += zc0301_write_reg(cam, 0x01C6, 0x08);
-	err += zc0301_write_reg(cam, 0x01CB, 0x0F);
-	err += zc0301_write_reg(cam, 0x010A, 0x50);
-	err += zc0301_write_reg(cam, 0x010B, 0xF8);
-	err += zc0301_write_reg(cam, 0x010C, 0xF8);
-	err += zc0301_write_reg(cam, 0x010D, 0xF8);
-	err += zc0301_write_reg(cam, 0x010E, 0x50);
-	err += zc0301_write_reg(cam, 0x010F, 0xF8);
-	err += zc0301_write_reg(cam, 0x0110, 0xF8);
-	err += zc0301_write_reg(cam, 0x0111, 0xF8);
-	err += zc0301_write_reg(cam, 0x0112, 0x50);
-	err += zc0301_write_reg(cam, 0x0180, 0x00);
-	err += zc0301_write_reg(cam, 0x0019, 0x00);
-
-	err += zc0301_i2c_write(cam, 0x05, 0x0066);
-	err += zc0301_i2c_write(cam, 0x09, 0x02B2);
-	err += zc0301_i2c_write(cam, 0x10, 0x0002);
-
-	err += zc0301_write_reg(cam, 0x011D, 0x60);
-	err += zc0301_write_reg(cam, 0x0190, 0x00);
-	err += zc0301_write_reg(cam, 0x0191, 0x07);
-	err += zc0301_write_reg(cam, 0x0192, 0x8C);
-	err += zc0301_write_reg(cam, 0x0195, 0x00);
-	err += zc0301_write_reg(cam, 0x0196, 0x00);
-	err += zc0301_write_reg(cam, 0x0197, 0x8A);
-	err += zc0301_write_reg(cam, 0x018C, 0x10);
-	err += zc0301_write_reg(cam, 0x018F, 0x20);
-	err += zc0301_write_reg(cam, 0x01A9, 0x14);
-	err += zc0301_write_reg(cam, 0x01AA, 0x24);
-	err += zc0301_write_reg(cam, 0x001D, 0xD7);
-	err += zc0301_write_reg(cam, 0x001E, 0xF0);
-	err += zc0301_write_reg(cam, 0x001F, 0xF8);
-	err += zc0301_write_reg(cam, 0x0020, 0xFF);
-	err += zc0301_write_reg(cam, 0x01AD, 0x09);
-	err += zc0301_write_reg(cam, 0x01AE, 0x15);
-	err += zc0301_write_reg(cam, 0x0180, 0x40);
-	err += zc0301_write_reg(cam, 0x0180, 0x42);
-
-	msleep(100);
-
-	return err;
-}
-
-
-static struct zc0301_sensor pb0330 = {
-	.name = "PB-0330",
-	.init = &pb0330_init,
-	.cropcap = {
-		.bounds = {
-			.left = 0,
-			.top = 0,
-			.width = 640,
-			.height = 480,
-		},
-		.defrect = {
-			.left = 0,
-			.top = 0,
-			.width = 640,
-			.height = 480,
-		},
-	},
-	.pix_format = {
-		.width = 640,
-		.height = 480,
-		.pixelformat = V4L2_PIX_FMT_JPEG,
-		.priv = 8,
-		.colorspace = V4L2_COLORSPACE_JPEG,
-	},
-};
-
-
-int zc0301_probe_pb0330(struct zc0301_device* cam)
-{
-	int r0, err = 0;
-
-	err += zc0301_write_reg(cam, 0x0000, 0x01);
-	err += zc0301_write_reg(cam, 0x0010, 0x0a);
-	err += zc0301_write_reg(cam, 0x0001, 0x01);
-	err += zc0301_write_reg(cam, 0x0012, 0x03);
-	err += zc0301_write_reg(cam, 0x0012, 0x01);
-
-	msleep(10);
-
-	r0 = zc0301_i2c_read(cam, 0x00, 2);
-
-	if (r0 < 0 || err)
-		return -EIO;
-
-	if (r0 != 0x8243)
-		return -ENODEV;
-
-	zc0301_attach_sensor(cam, &pb0330);
-
-	return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
deleted file mode 100644
index 0be783c203f..00000000000
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/***************************************************************************
- * API for image sensors connected to the ZC0301[P] Image Processor and    *
- * Control Chip                                                            *
- *                                                                         *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#ifndef _ZC0301_SENSOR_H_
-#define _ZC0301_SENSOR_H_
-
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <linux/stddef.h>
-#include <linux/errno.h>
-#include <asm/types.h>
-
-struct zc0301_device;
-struct zc0301_sensor;
-
-/*****************************************************************************/
-
-extern int zc0301_probe_pas202bcb(struct zc0301_device* cam);
-extern int zc0301_probe_pb0330(struct zc0301_device* cam);
-
-#define ZC0301_SENSOR_TABLE                                                   \
-/* Weak detections must go at the end of the list */                          \
-static int (*zc0301_sensor_table[])(struct zc0301_device*) = {                \
-	&zc0301_probe_pas202bcb,                                              \
-	&zc0301_probe_pb0330,                                                 \
-	NULL,                                                                 \
-};
-
-extern struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id);
-
-extern void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
-
-#define ZC0301_USB_DEVICE(vend, prod, intclass)                               \
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
-		       USB_DEVICE_ID_MATCH_INT_CLASS,                         \
-	.idVendor = (vend),                                                   \
-	.idProduct = (prod),                                                  \
-	.bInterfaceClass = (intclass)
-
-#if !defined CONFIG_USB_GSPCA_ZC3XX && !defined CONFIG_USB_GSPCA_ZC3XX_MODULE
-#define ZC0301_ID_TABLE                                                       \
-static const struct usb_device_id zc0301_id_table[] =  {                      \
-	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */            \
-	{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */           \
-	{ }                                                                   \
-};
-#else
-#define ZC0301_ID_TABLE                                                       \
-static const struct usb_device_id zc0301_id_table[] =  {                      \
-	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */            \
-	{ }                                                                   \
-};
-#endif
-
-/*****************************************************************************/
-
-extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value);
-extern int zc0301_read_reg(struct zc0301_device*, u16 index);
-extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value);
-extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length);
-
-/*****************************************************************************/
-
-#define ZC0301_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10)
-#define ZC0301_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
-#define ZC0301_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
-
-struct zc0301_sensor {
-	char name[32];
-
-	struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS];
-	struct v4l2_cropcap cropcap;
-	struct v4l2_pix_format pix_format;
-
-	int (*init)(struct zc0301_device*);
-	int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
-	int (*set_ctrl)(struct zc0301_device*,
-			const struct v4l2_control* ctrl);
-	int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
-
-	/* Private */
-	struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS];
-	struct v4l2_rect _rect;
-};
-
-#endif /* _ZC0301_SENSOR_H_ */
diff --git a/drivers/media/video/zoran/videocodec.c b/drivers/media/video/zoran/videocodec.c
index cf24956f320..c0107163529 100644
--- a/drivers/media/video/zoran/videocodec.c
+++ b/drivers/media/video/zoran/videocodec.c
@@ -107,15 +107,14 @@ videocodec_attach (struct videocodec_master *master)
 			if (!try_module_get(h->codec->owner))
 				return NULL;
 
-			codec =
-			    kmalloc(sizeof(struct videocodec), GFP_KERNEL);
+			codec = kmemdup(h->codec, sizeof(struct videocodec),
+					GFP_KERNEL);
 			if (!codec) {
 				dprintk(1,
 					KERN_ERR
 					"videocodec_attach: no mem\n");
 				goto out_module_put;
 			}
-			memcpy(codec, h->codec, sizeof(struct videocodec));
 
 			snprintf(codec->name, sizeof(codec->name),
 				 "%s[%d]", codec->name, h->attached);
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
index c933b64d128..bc02e6b2160 100644
--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -200,8 +200,6 @@ static int __devexit pm860x_remove(struct i2c_client *client)
 
 	pm860x_device_exit(chip);
 	i2c_unregister_device(chip->companion);
-	i2c_set_clientdata(chip->client, NULL);
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 53ebfee548f..66379b41390 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -957,7 +957,6 @@ static int __init ab3100_probe(struct i2c_client *client,
 	i2c_unregister_device(ab3100->testreg_client);
  exit_no_testreg_client:
  exit_no_detect:
-	i2c_set_clientdata(client, NULL);
 	kfree(ab3100);
 	return err;
 }
@@ -979,7 +978,6 @@ static int __exit ab3100_remove(struct i2c_client *client)
 	 * their notifiers so deactivate IRQ
 	 */
 	free_irq(client->irq, ab3100);
-	i2c_set_clientdata(client, NULL);
 	kfree(ab3100);
 	return 0;
 }
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
index 1060f8e1c40..f54ab62e7bc 100644
--- a/drivers/mfd/ab3550-core.c
+++ b/drivers/mfd/ab3550-core.c
@@ -1362,7 +1362,6 @@ static int __exit ab3550_remove(struct i2c_client *client)
 	 * their notifiers so deactivate IRQ
 	 */
 	free_irq(client->irq, ab);
-	i2c_set_clientdata(client, NULL);
 	kfree(ab);
 	return 0;
 }
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 00553286565..3122139b430 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -302,7 +302,6 @@ out_free_irq:
 		free_irq(chip->irq, chip);
 
 out_free_chip:
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 
 	return ret;
@@ -317,7 +316,6 @@ static int __devexit adp5520_remove(struct i2c_client *client)
 
 	adp5520_remove_subdevs(chip);
 	adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 3ad915d0589..c07aece900f 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -534,7 +534,6 @@ static int __devinit da903x_probe(struct i2c_client *client,
 out_free_irq:
 	free_irq(client->irq, chip);
 out_free_chip:
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return ret;
 }
@@ -544,7 +543,6 @@ static int __devexit da903x_remove(struct i2c_client *client)
 	struct da903x_chip *chip = i2c_get_clientdata(client);
 
 	da903x_remove_subdevs(chip);
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index e73f3f5252a..0219115e00c 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -173,7 +173,6 @@ static int __devexit max8925_remove(struct i2c_client *client)
 	max8925_device_exit(chip);
 	i2c_unregister_device(chip->adc);
 	i2c_unregister_device(chip->rtc);
-	i2c_set_clientdata(chip->i2c, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 721948be12c..a3fb4bcb988 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1228,7 +1228,6 @@ fail2:
 	free_irq(client->irq, menelaus);
 	flush_scheduled_work();
 fail1:
-	i2c_set_clientdata(client, NULL);
 	kfree(menelaus);
 	return err;
 }
@@ -1238,7 +1237,6 @@ static int __exit menelaus_remove(struct i2c_client *client)
 	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
 
 	free_irq(client->irq, menelaus);
-	i2c_set_clientdata(client, NULL);
 	kfree(menelaus);
 	the_menelaus = NULL;
 	return 0;
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 704736e6e9b..23e58552728 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -336,7 +336,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	return 0;
 
 err_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
 
 	return ret;
@@ -357,7 +356,6 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
 		platform_device_unregister(pcf->regulator_pdev[i]);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
 
 	return 0;
diff --git a/drivers/mfd/tc35892.c b/drivers/mfd/tc35892.c
index 715f095dd7a..e619e2a5599 100644
--- a/drivers/mfd/tc35892.c
+++ b/drivers/mfd/tc35892.c
@@ -296,7 +296,6 @@ out_freeirq:
 out_removeirq:
 	tc35892_irq_remove(tc35892);
 out_free:
-	i2c_set_clientdata(i2c, NULL);
 	kfree(tc35892);
 	return ret;
 }
@@ -310,7 +309,6 @@ static int __devexit tc35892_remove(struct i2c_client *client)
 	free_irq(tc35892->i2c->irq, tc35892);
 	tc35892_irq_remove(tc35892);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(tc35892);
 
 	return 0;
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index 9b22a77f70f..d0016b67d12 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -530,7 +530,6 @@ static int __exit tps65010_remove(struct i2c_client *client)
 	cancel_delayed_work(&tps->work);
 	flush_scheduled_work();
 	debugfs_remove(tps->file);
-	i2c_set_clientdata(client, NULL);
 	kfree(tps);
 	the_tps = NULL;
 	return 0;
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 7795af4b1fe..5fe5de166ad 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -80,7 +80,6 @@ static int wm8350_i2c_probe(struct i2c_client *i2c,
 	return ret;
 
 err:
-	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8350);
 	return ret;
 }
@@ -90,7 +89,6 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
 	struct wm8350 *wm8350 = i2c_get_clientdata(i2c);
 
 	wm8350_device_exit(wm8350);
-	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8350);
 
 	return 0;
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e08aafa663d..1bfef4846b0 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -415,7 +415,6 @@ static int wm8400_i2c_probe(struct i2c_client *i2c,
 	return 0;
 
 struct_err:
-	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8400);
 err:
 	return ret;
@@ -426,7 +425,6 @@ static int wm8400_i2c_remove(struct i2c_client *i2c)
 	struct wm8400 *wm8400 = i2c_get_clientdata(i2c);
 
 	wm8400_release(wm8400);
-	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8400);
 
 	return 0;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 26386a92f5a..9b089dfb173 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -353,6 +353,16 @@ config VMWARE_BALLOON
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmware_balloon.
 
+config ARM_CHARLCD
+	bool "ARM Ltd. Character LCD Driver"
+	depends on PLAT_VERSATILE
+	help
+	  This is a driver for the character LCD found on the ARM Ltd.
+	  Versatile and RealView Platform Baseboards. It doesn't do
+	  very much more than display the text "ARM Linux" on the first
+	  line and the Linux version on the second line, but that's
+	  still useful.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6ed06a19474..67552d6e932 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-y				+= eeprom/
 obj-y				+= cb710/
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
+obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
new file mode 100644
index 00000000000..9e3879ef58f
--- /dev/null
+++ b/drivers/misc/arm-charlcd.c
@@ -0,0 +1,396 @@
+/*
+ * Driver for the on-board character LCD found on some ARM reference boards
+ * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it
+ * http://en.wikipedia.org/wiki/HD44780_Character_LCD
+ * Currently it will just display the text "ARM Linux" and the linux version
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <generated/utsrelease.h>
+
+#define DRIVERNAME "arm-charlcd"
+#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000))
+
+/* Offsets to registers */
+#define CHAR_COM	0x00U
+#define CHAR_DAT	0x04U
+#define CHAR_RD		0x08U
+#define CHAR_RAW	0x0CU
+#define CHAR_MASK	0x10U
+#define CHAR_STAT	0x14U
+
+#define CHAR_RAW_CLEAR	0x00000000U
+#define CHAR_RAW_VALID	0x00000100U
+
+/* Hitachi HD44780 display commands */
+#define HD_CLEAR			0x01U
+#define HD_HOME				0x02U
+#define HD_ENTRYMODE			0x04U
+#define HD_ENTRYMODE_INCREMENT		0x02U
+#define HD_ENTRYMODE_SHIFT		0x01U
+#define HD_DISPCTRL			0x08U
+#define HD_DISPCTRL_ON			0x04U
+#define HD_DISPCTRL_CURSOR_ON		0x02U
+#define HD_DISPCTRL_CURSOR_BLINK	0x01U
+#define HD_CRSR_SHIFT			0x10U
+#define HD_CRSR_SHIFT_DISPLAY		0x08U
+#define HD_CRSR_SHIFT_DISPLAY_RIGHT	0x04U
+#define HD_FUNCSET			0x20U
+#define HD_FUNCSET_8BIT			0x10U
+#define HD_FUNCSET_2_LINES		0x08U
+#define HD_FUNCSET_FONT_5X10		0x04U
+#define HD_SET_CGRAM			0x40U
+#define HD_SET_DDRAM			0x80U
+#define HD_BUSY_FLAG			0x80U
+
+/**
+ * @dev: a pointer back to containing device
+ * @phybase: the offset to the controller in physical memory
+ * @physize: the size of the physical page
+ * @virtbase: the offset to the controller in virtual memory
+ * @irq: reserved interrupt number
+ * @complete: completion structure for the last LCD command
+ */
+struct charlcd {
+	struct device *dev;
+	u32 phybase;
+	u32 physize;
+	void __iomem *virtbase;
+	int irq;
+	struct completion complete;
+	struct delayed_work init_work;
+};
+
+static irqreturn_t charlcd_interrupt(int irq, void *data)
+{
+	struct charlcd *lcd = data;
+	u8 status;
+
+	status = readl(lcd->virtbase + CHAR_STAT) & 0x01;
+	/* Clear IRQ */
+	writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	if (status)
+		complete(&lcd->complete);
+	else
+		dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status);
+	return IRQ_HANDLED;
+}
+
+
+static void charlcd_wait_complete_irq(struct charlcd *lcd)
+{
+	int ret;
+
+	ret = wait_for_completion_interruptible_timeout(&lcd->complete,
+							CHARLCD_TIMEOUT);
+	/* Disable IRQ after completion */
+	writel(0x00, lcd->virtbase + CHAR_MASK);
+
+	if (ret < 0) {
+		dev_err(lcd->dev,
+			"wait_for_completion_interruptible_timeout() "
+			"returned %d waiting for ready\n", ret);
+		return;
+	}
+
+	if (ret == 0) {
+		dev_err(lcd->dev, "charlcd controller timed out "
+			"waiting for ready\n");
+		return;
+	}
+}
+
+static u8 charlcd_4bit_read_char(struct charlcd *lcd)
+{
+	u8 data;
+	u32 val;
+	int i;
+
+	/* If we can, use an IRQ to wait for the data, else poll */
+	if (lcd->irq >= 0)
+		charlcd_wait_complete_irq(lcd);
+	else {
+		i = 0;
+		val = 0;
+		while (!(val & CHAR_RAW_VALID) && i < 10) {
+			udelay(100);
+			val = readl(lcd->virtbase + CHAR_RAW);
+			i++;
+		}
+
+		writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	}
+	msleep(1);
+
+	/* Read the 4 high bits of the data */
+	data = readl(lcd->virtbase + CHAR_RD) & 0xf0;
+
+	/*
+	 * The second read for the low bits does not trigger an IRQ
+	 * so in this case we have to poll for the 4 lower bits
+	 */
+	i = 0;
+	val = 0;
+	while (!(val & CHAR_RAW_VALID) && i < 10) {
+		udelay(100);
+		val = readl(lcd->virtbase + CHAR_RAW);
+		i++;
+	}
+	writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	msleep(1);
+
+	/* Read the 4 low bits of the data */
+	data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f;
+
+	return data;
+}
+
+static bool charlcd_4bit_read_bf(struct charlcd *lcd)
+{
+	if (lcd->irq >= 0) {
+		/*
+		 * If we'll use IRQs to wait for the busyflag, clear any
+		 * pending flag and enable IRQ
+		 */
+		writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+		init_completion(&lcd->complete);
+		writel(0x01, lcd->virtbase + CHAR_MASK);
+	}
+	readl(lcd->virtbase + CHAR_COM);
+	return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false;
+}
+
+static void charlcd_4bit_wait_busy(struct charlcd *lcd)
+{
+	int retries = 50;
+
+	udelay(100);
+	while (charlcd_4bit_read_bf(lcd) && retries)
+		retries--;
+	if (!retries)
+		dev_err(lcd->dev, "timeout waiting for busyflag\n");
+}
+
+static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd)
+{
+	u32 cmdlo = (cmd << 4) & 0xf0;
+	u32 cmdhi = (cmd & 0xf0);
+
+	writel(cmdhi, lcd->virtbase + CHAR_COM);
+	udelay(10);
+	writel(cmdlo, lcd->virtbase + CHAR_COM);
+	charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_char(struct charlcd *lcd, u8 ch)
+{
+	u32 chlo = (ch << 4) & 0xf0;
+	u32 chhi = (ch & 0xf0);
+
+	writel(chhi, lcd->virtbase + CHAR_DAT);
+	udelay(10);
+	writel(chlo, lcd->virtbase + CHAR_DAT);
+	charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str)
+{
+	u8 offset;
+	int i;
+
+	/*
+	 * We support line 0, 1
+	 * Line 1 runs from 0x00..0x27
+	 * Line 2 runs from 0x28..0x4f
+	 */
+	if (line == 0)
+		offset = 0;
+	else if (line == 1)
+		offset = 0x28;
+	else
+		return;
+
+	/* Set offset */
+	charlcd_4bit_command(lcd, HD_SET_DDRAM | offset);
+
+	/* Send string */
+	for (i = 0; i < strlen(str) && i < 0x28; i++)
+		charlcd_4bit_char(lcd, str[i]);
+}
+
+static void charlcd_4bit_init(struct charlcd *lcd)
+{
+	/* These commands cannot be checked with the busy flag */
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	msleep(5);
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	/* Go to 4bit mode */
+	writel(HD_FUNCSET, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	/*
+	 * 4bit mode, 2 lines, 5x8 font, after this the number of lines
+	 * and the font cannot be changed until the next initialization sequence
+	 */
+	charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES);
+	charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+	charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT);
+	charlcd_4bit_command(lcd, HD_CLEAR);
+	charlcd_4bit_command(lcd, HD_HOME);
+	/* Put something useful in the display */
+	charlcd_4bit_print(lcd, 0, "ARM Linux");
+	charlcd_4bit_print(lcd, 1, UTS_RELEASE);
+}
+
+static void charlcd_init_work(struct work_struct *work)
+{
+	struct charlcd *lcd =
+		container_of(work, struct charlcd, init_work.work);
+
+	charlcd_4bit_init(lcd);
+}
+
+static int __init charlcd_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct charlcd *lcd;
+	struct resource *res;
+
+	lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL);
+	if (!lcd)
+		return -ENOMEM;
+
+	lcd->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto out_no_resource;
+	}
+	lcd->phybase = res->start;
+	lcd->physize = resource_size(res);
+
+	if (request_mem_region(lcd->phybase, lcd->physize,
+			       DRIVERNAME) == NULL) {
+		ret = -EBUSY;
+		goto out_no_memregion;
+	}
+
+	lcd->virtbase = ioremap(lcd->phybase, lcd->physize);
+	if (!lcd->virtbase) {
+		ret = -ENOMEM;
+		goto out_no_remap;
+	}
+
+	lcd->irq = platform_get_irq(pdev, 0);
+	/* If no IRQ is supplied, we'll survive without it */
+	if (lcd->irq >= 0) {
+		if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED,
+				DRIVERNAME, lcd)) {
+			ret = -EIO;
+			goto out_no_irq;
+		}
+	}
+
+	platform_set_drvdata(pdev, lcd);
+
+	/*
+	 * Initialize the display in a delayed work, because
+	 * it is VERY slow and would slow down the boot of the system.
+	 */
+	INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
+	schedule_delayed_work(&lcd->init_work, 0);
+
+	dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+		lcd->phybase);
+
+	return 0;
+
+out_no_irq:
+	iounmap(lcd->virtbase);
+out_no_remap:
+	platform_set_drvdata(pdev, NULL);
+out_no_memregion:
+	release_mem_region(lcd->phybase, SZ_4K);
+out_no_resource:
+	kfree(lcd);
+	return ret;
+}
+
+static int __exit charlcd_remove(struct platform_device *pdev)
+{
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	if (lcd) {
+		free_irq(lcd->irq, lcd);
+		iounmap(lcd->virtbase);
+		release_mem_region(lcd->phybase, lcd->physize);
+		platform_set_drvdata(pdev, NULL);
+		kfree(lcd);
+	}
+
+	return 0;
+}
+
+static int charlcd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	/* Power the display off */
+	charlcd_4bit_command(lcd, HD_DISPCTRL);
+	return 0;
+}
+
+static int charlcd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	/* Turn the display back on */
+	charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+	return 0;
+}
+
+static const struct dev_pm_ops charlcd_pm_ops = {
+	.suspend = charlcd_suspend,
+	.resume = charlcd_resume,
+};
+
+static struct platform_driver charlcd_driver = {
+	.driver = {
+		.name = DRIVERNAME,
+		.owner = THIS_MODULE,
+		.pm = &charlcd_pm_ops,
+	},
+	.remove = __exit_p(charlcd_remove),
+};
+
+static int __init charlcd_init(void)
+{
+	return platform_driver_probe(&charlcd_driver, charlcd_probe);
+}
+
+static void __exit charlcd_exit(void)
+{
+	platform_driver_unregister(&charlcd_driver);
+}
+
+module_init(charlcd_init);
+module_exit(charlcd_exit);
+
+MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>");
+MODULE_DESCRIPTION("ARM Character LCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 9bec24db4d4..2d44b330010 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -366,6 +366,6 @@ static int __init cs5535_mfgpt_init(void)
 
 module_init(cs5535_mfgpt_init);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f7ca3a42b49..559b0b3c16c 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -643,7 +643,6 @@ static int __devexit at24_remove(struct i2c_client *client)
 
 	kfree(at24->writebuf);
 	kfree(at24);
-	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
index db9cd0240c6..2a1e804a71a 100644
--- a/drivers/misc/vmware_balloon.c
+++ b/drivers/misc/vmware_balloon.c
@@ -45,7 +45,7 @@
 
 MODULE_AUTHOR("VMware, Inc.");
 MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
 MODULE_ALIAS("dmi:*:svnVMware*:*");
 MODULE_ALIAS("vmware_vmmemctl");
 MODULE_LICENSE("GPL");
@@ -101,6 +101,8 @@ MODULE_LICENSE("GPL");
 /* Maximum number of page allocations without yielding processor */
 #define VMW_BALLOON_YIELD_THRESHOLD	1024
 
+/* Maximum number of refused pages we accumulate during inflation cycle */
+#define VMW_BALLOON_MAX_REFUSED		16
 
 /*
  * Hypervisor communication port definitions.
@@ -183,6 +185,7 @@ struct vmballoon {
 
 	/* transient list of non-balloonable pages */
 	struct list_head refused_pages;
+	unsigned int n_refused_pages;
 
 	/* balloon size in pages */
 	unsigned int size;
@@ -428,14 +431,21 @@ static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep)
 		/* inform monitor */
 		locked = vmballoon_send_lock_page(b, page_to_pfn(page));
 		if (!locked) {
+			STATS_INC(b->stats.refused_alloc);
+
 			if (b->reset_required) {
 				__free_page(page);
 				return -EIO;
 			}
 
-			/* place on list of non-balloonable pages, retry allocation */
+			/*
+			 * Place page on the list of non-balloonable pages
+			 * and retry allocation, unless we already accumulated
+			 * too many of them, in which case take a breather.
+			 */
 			list_add(&page->lru, &b->refused_pages);
-			STATS_INC(b->stats.refused_alloc);
+			if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED)
+				return -EIO;
 		}
 	} while (!locked);
 
@@ -483,6 +493,8 @@ static void vmballoon_release_refused_pages(struct vmballoon *b)
 		__free_page(page);
 		STATS_INC(b->stats.refused_free);
 	}
+
+	b->n_refused_pages = 0;
 }
 
 /*
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e171e77f612..f06d06e7fdf 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -249,7 +249,7 @@ config MMC_IMX
 
 config MMC_MSM7X00A
 	tristate "Qualcomm MSM 7X00A SDCC Controller Support"
-	depends on MMC && ARCH_MSM
+	depends on MMC && ARCH_MSM && !ARCH_MSM7X30
 	help
 	  This provides support for the SD/MMC cell found in the
           MSM 7X00A controllers from Qualcomm.
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 4917af96bae..840b301b567 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -26,7 +26,6 @@
 #include <linux/amba/mmci.h>
 #include <linux/regulator/consumer.h>
 
-#include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -37,12 +36,39 @@
 
 static unsigned int fmax = 515633;
 
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ */
+struct variant_data {
+	unsigned int		clkreg;
+	unsigned int		clkreg_enable;
+	unsigned int		datalength_bits;
+};
+
+static struct variant_data variant_arm = {
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_u300 = {
+	.clkreg_enable		= 1 << 13, /* HWFCEN */
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_ux500 = {
+	.clkreg			= MCI_CLK_ENABLE,
+	.clkreg_enable		= 1 << 14, /* HWFCEN */
+	.datalength_bits	= 24,
+};
 /*
  * This must be called with host->lock held
  */
 static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 {
-	u32 clk = 0;
+	struct variant_data *variant = host->variant;
+	u32 clk = variant->clkreg;
 
 	if (desired) {
 		if (desired >= host->mclk) {
@@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == AMBA_VENDOR_ST)
-			clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
+
+		clk |= variant->clkreg_enable;
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
 		/* clk |= MCI_CLK_PWRSAVE; */
@@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host)
 	host->data = NULL;
 }
 
+static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
+{
+	unsigned int flags = SG_MITER_ATOMIC;
+
+	if (data->flags & MMC_DATA_READ)
+		flags |= SG_MITER_TO_SG;
+	else
+		flags |= SG_MITER_FROM_SG;
+
+	sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
 	unsigned int datactrl, timeout, irqmask;
@@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 		data->blksz, data->blocks, data->flags);
 
 	host->data = data;
-	host->size = data->blksz;
+	host->size = data->blksz * data->blocks;
 	host->data_xfered = 0;
 
 	mmci_init_sg(host, data);
@@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		 * We hit an error condition.  Ensure that any data
 		 * partially written to a page is properly coherent.
 		 */
-		if (host->sg_len && data->flags & MMC_DATA_READ)
-			flush_dcache_page(sg_page(host->sg_ptr));
+		if (data->flags & MMC_DATA_READ) {
+			struct sg_mapping_iter *sg_miter = &host->sg_miter;
+			unsigned long flags;
+
+			local_irq_save(flags);
+			if (sg_miter_next(sg_miter)) {
+				flush_dcache_page(sg_miter->page);
+				sg_miter_stop(sg_miter);
+			}
+			local_irq_restore(flags);
+		}
 	}
 	if (status & MCI_DATAEND) {
 		mmci_stop_data(host);
@@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
 static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 {
 	struct mmci_host *host = dev_id;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
 	void __iomem *base = host->base;
+	unsigned long flags;
 	u32 status;
 
 	status = readl(base + MMCISTATUS);
 
 	dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
 
+	local_irq_save(flags);
+
 	do {
-		unsigned long flags;
 		unsigned int remain, len;
 		char *buffer;
 
@@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 		if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
 			break;
 
-		/*
-		 * Map the current scatter buffer.
-		 */
-		buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
-		remain = host->sg_ptr->length - host->sg_off;
+		if (!sg_miter_next(sg_miter))
+			break;
+
+		buffer = sg_miter->addr;
+		remain = sg_miter->length;
 
 		len = 0;
 		if (status & MCI_RXACTIVE)
@@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 		if (status & MCI_TXACTIVE)
 			len = mmci_pio_write(host, buffer, remain, status);
 
-		/*
-		 * Unmap the buffer.
-		 */
-		mmci_kunmap_atomic(host, buffer, &flags);
+		sg_miter->consumed = len;
 
-		host->sg_off += len;
 		host->size -= len;
 		remain -= len;
 
 		if (remain)
 			break;
 
-		/*
-		 * If we were reading, and we have completed this
-		 * page, ensure that the data cache is coherent.
-		 */
 		if (status & MCI_RXACTIVE)
-			flush_dcache_page(sg_page(host->sg_ptr));
-
-		if (!mmci_next_sg(host))
-			break;
+			flush_dcache_page(sg_miter->page);
 
 		status = readl(base + MMCISTATUS);
 	} while (1);
 
+	sg_miter_stop(sg_miter);
+
+	local_irq_restore(flags);
+
 	/*
 	 * If we're nearing the end of the read, switch to
 	 * "any data available" mode.
@@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			/* This implicitly enables the regulator */
 			mmc_regulator_set_ocr(host->vcc, ios->vdd);
 #endif
-		/*
-		 * The translate_vdd function is not used if you have
-		 * an external regulator, or your design is really weird.
-		 * Using it would mean sending in power control BOTH using
-		 * a regulator AND the 4 MMCIPWR bits. If we don't have
-		 * a regulator, we might have some other platform specific
-		 * power control behind this translate function.
-		 */
-		if (!host->vcc && host->plat->translate_vdd)
-			pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+		if (host->plat->vdd_handler)
+			pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
+						       ios->power_mode);
 		/* The ST version does not have this, fall through to POWER_ON */
 		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
@@ -539,9 +575,13 @@ static int mmci_get_cd(struct mmc_host *mmc)
 	if (host->gpio_cd == -ENOSYS)
 		status = host->plat->status(mmc_dev(host->mmc));
 	else
-		status = gpio_get_value(host->gpio_cd);
+		status = !gpio_get_value(host->gpio_cd);
 
-	return !status;
+	/*
+	 * Use positive logic throughout - status is zero for no card,
+	 * non-zero for card inserted.
+	 */
+	return status;
 }
 
 static const struct mmc_host_ops mmci_ops = {
@@ -551,21 +591,10 @@ static const struct mmc_host_ops mmci_ops = {
 	.get_cd		= mmci_get_cd,
 };
 
-static void mmci_check_status(unsigned long data)
-{
-	struct mmci_host *host = (struct mmci_host *)data;
-	unsigned int status = mmci_get_cd(host->mmc);
-
-	if (status ^ host->oldstat)
-		mmc_detect_change(host->mmc, 0);
-
-	host->oldstat = status;
-	mod_timer(&host->timer, jiffies + HZ);
-}
-
 static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct mmci_platform_data *plat = dev->dev.platform_data;
+	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
@@ -609,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		goto clk_free;
 
 	host->plat = plat;
+	host->variant = variant;
 	host->mclk = clk_get_rate(host->clk);
 	/*
 	 * According to the spec, mclk is max 100 MHz,
@@ -669,6 +699,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	if (host->vcc == NULL)
 		mmc->ocr_avail = plat->ocr_mask;
 	mmc->caps = plat->capabilities;
+	mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/*
 	 * We can do SGIO
@@ -677,10 +708,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	mmc->max_phys_segs = NR_SG;
 
 	/*
-	 * Since we only have a 16-bit data length register, we must
-	 * ensure that we don't exceed 2^16-1 bytes in a single request.
+	 * Since only a certain number of bits are valid in the data length
+	 * register, we must ensure that we don't exceed 2^num-1 bytes in a
+	 * single request.
 	 */
-	mmc->max_req_size = 65535;
+	mmc->max_req_size = (1 << variant->datalength_bits) - 1;
 
 	/*
 	 * Set the maximum segment size.  Since we aren't doing DMA
@@ -734,7 +766,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
-	host->oldstat = mmci_get_cd(host->mmc);
 
 	mmc_add_host(mmc);
 
@@ -742,12 +773,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
 		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
 
-	init_timer(&host->timer);
-	host->timer.data = (unsigned long)host;
-	host->timer.function = mmci_check_status;
-	host->timer.expires = jiffies + HZ;
-	add_timer(&host->timer);
-
 	return 0;
 
  irq0_free:
@@ -781,8 +806,6 @@ static int __devexit mmci_remove(struct amba_device *dev)
 	if (mmc) {
 		struct mmci_host *host = mmc_priv(mmc);
 
-		del_timer_sync(&host->timer);
-
 		mmc_remove_host(mmc);
 
 		writel(0, host->base + MMCIMASK0);
@@ -856,19 +879,28 @@ static struct amba_id mmci_ids[] = {
 	{
 		.id	= 0x00041180,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	{
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	/* ST Micro variants */
 	{
 		.id     = 0x00180180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
 	},
 	{
 		.id     = 0x00280180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
+	},
+	{
+		.id     = 0x00480180,
+		.mask   = 0x00ffffff,
+		.data	= &variant_ux500,
 	},
 	{ 0, 0 },
 };
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d77062e5e3a..68970cfb81e 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -28,8 +28,6 @@
 #define MCI_4BIT_BUS		(1 << 11)
 /* 8bit wide buses supported in ST Micro versions */
 #define MCI_ST_8BIT_BUS		(1 << 12)
-/* HW flow control on the ST Micro version */
-#define MCI_ST_FCEN		(1 << 13)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -145,6 +143,7 @@
 #define NR_SG		16
 
 struct clk;
+struct variant_data;
 
 struct mmci_host {
 	void __iomem		*base;
@@ -164,6 +163,7 @@ struct mmci_host {
 	unsigned int		cclk;
 	u32			pwr;
 	struct mmci_platform_data *plat;
+	struct variant_data	*variant;
 
 	u8			hw_designer;
 	u8			hw_revision:4;
@@ -171,42 +171,9 @@ struct mmci_host {
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
-	unsigned int		sg_len;
-
 	/* pio stuff */
-	struct scatterlist	*sg_ptr;
-	unsigned int		sg_off;
+	struct sg_mapping_iter	sg_miter;
 	unsigned int		size;
 	struct regulator	*vcc;
 };
 
-static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
-{
-	/*
-	 * Ideally, we want the higher levels to pass us a scatter list.
-	 */
-	host->sg_len = data->sg_len;
-	host->sg_ptr = data->sg;
-	host->sg_off = 0;
-}
-
-static inline int mmci_next_sg(struct mmci_host *host)
-{
-	host->sg_ptr++;
-	host->sg_off = 0;
-	return --host->sg_len;
-}
-
-static inline char *mmci_kmap_atomic(struct mmci_host *host, unsigned long *flags)
-{
-	struct scatterlist *sg = host->sg_ptr;
-
-	local_irq_save(*flags);
-	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-}
-
-static inline void mmci_kunmap_atomic(struct mmci_host *host, void *buffer, unsigned long *flags)
-{
-	kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
-	local_irq_restore(*flags);
-}
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index d9d4a72e0ec..350f78e8624 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -119,6 +119,7 @@ struct mxcmci_host {
 	int			detect_irq;
 	int			dma;
 	int			do_dma;
+	int			default_irq_mask;
 	int			use_sdio;
 	unsigned int		power_mode;
 	struct imxmmc_platform_data *pdata;
@@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
 		unsigned int cmdat)
 {
-	u32 int_cntr;
+	u32 int_cntr = host->default_irq_mask;
 	unsigned long flags;
 
 	WARN_ON(host->cmd != NULL);
@@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
 static void mxcmci_finish_request(struct mxcmci_host *host,
 		struct mmc_request *req)
 {
-	u32 int_cntr = 0;
+	u32 int_cntr = host->default_irq_mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid)
 		  (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
 		mxcmci_data_done(host, stat);
 #endif
+	if (host->default_irq_mask &&
+		  (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL)))
+		mmc_detect_change(host->mmc, msecs_to_jiffies(200));
 	return IRQ_HANDLED;
 }
 
@@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev)
 	else
 		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
+	if (host->pdata && host->pdata->dat3_card_detect)
+		host->default_irq_mask =
+			INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN;
+	else
+		host->default_irq_mask = 0;
+
 	host->res = r;
 	host->irq = irq;
 
@@ -835,7 +845,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	/* recommended in data sheet */
 	writew(0x2db4, host->base + MMC_REG_READ_TO);
 
-	writel(0, host->base + MMC_REG_INT_CNTR);
+	writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR);
 
 #ifdef HAS_DMA
 	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
@@ -926,43 +936,47 @@ static int mxcmci_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+static int mxcmci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxcmci_host *host = mmc_priv(mmc);
 	int ret = 0;
 
 	if (mmc)
 		ret = mmc_suspend_host(mmc);
+	clk_disable(host->clk);
 
 	return ret;
 }
 
-static int mxcmci_resume(struct platform_device *dev)
+static int mxcmci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct mxcmci_host *host;
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxcmci_host *host = mmc_priv(mmc);
 	int ret = 0;
 
-	if (mmc) {
-		host = mmc_priv(mmc);
+	clk_enable(host->clk);
+	if (mmc)
 		ret = mmc_resume_host(mmc);
-	}
 
 	return ret;
 }
-#else
-#define mxcmci_suspend  NULL
-#define mxcmci_resume   NULL
-#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops mxcmci_pm_ops = {
+	.suspend	= mxcmci_suspend,
+	.resume		= mxcmci_resume,
+};
+#endif
 
 static struct platform_driver mxcmci_driver = {
 	.probe		= mxcmci_probe,
 	.remove		= mxcmci_remove,
-	.suspend	= mxcmci_suspend,
-	.resume		= mxcmci_resume,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.owner		= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &mxcmci_pm_ops,
+#endif
 	}
 };
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 2b281680e32..d98ddcfac5e 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1157,7 +1157,6 @@ static void mmc_omap_start_request(struct mmc_omap_host *host,
 	mmc_omap_start_command(host, req->cmd);
 	if (host->dma_in_use)
 		omap_start_dma(host->dma_ch);
-	BUG_ON(irqs_disabled());
 }
 
 static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index af217924a76..ad30f074ee1 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -365,6 +365,26 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 
 static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 {
+	struct sdhci_host *host =  platform_get_drvdata(pdev);
+	struct sdhci_s3c *sc = sdhci_priv(host);
+	int ptr;
+
+	sdhci_remove_host(host, 1);
+
+	for (ptr = 0; ptr < 3; ptr++) {
+		clk_disable(sc->clk_bus[ptr]);
+		clk_put(sc->clk_bus[ptr]);
+	}
+	clk_disable(sc->clk_io);
+	clk_put(sc->clk_io);
+
+	iounmap(host->ioaddr);
+	release_resource(sc->ioarea);
+	kfree(sc->ioarea);
+
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index eb97830c034..5d3f824bb5a 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -30,25 +30,6 @@
 #define DRIVER_NAME	"sh_mmcif"
 #define DRIVER_VERSION	"2010-04-28"
 
-#define MMCIF_CE_CMD_SET	0x00000000
-#define MMCIF_CE_ARG		0x00000008
-#define MMCIF_CE_ARG_CMD12	0x0000000C
-#define MMCIF_CE_CMD_CTRL	0x00000010
-#define MMCIF_CE_BLOCK_SET	0x00000014
-#define MMCIF_CE_CLK_CTRL	0x00000018
-#define MMCIF_CE_BUF_ACC	0x0000001C
-#define MMCIF_CE_RESP3		0x00000020
-#define MMCIF_CE_RESP2		0x00000024
-#define MMCIF_CE_RESP1		0x00000028
-#define MMCIF_CE_RESP0		0x0000002C
-#define MMCIF_CE_RESP_CMD12	0x00000030
-#define MMCIF_CE_DATA		0x00000034
-#define MMCIF_CE_INT		0x00000040
-#define MMCIF_CE_INT_MASK	0x00000044
-#define MMCIF_CE_HOST_STS1	0x00000048
-#define MMCIF_CE_HOST_STS2	0x0000004C
-#define MMCIF_CE_VERSION	0x0000007C
-
 /* CE_CMD_SET */
 #define CMD_MASK		0x3f000000
 #define CMD_SET_RTYP_NO		((0 << 23) | (0 << 22))
@@ -207,27 +188,17 @@ struct sh_mmcif_host {
 	wait_queue_head_t intr_wait;
 };
 
-static inline u32 sh_mmcif_readl(struct sh_mmcif_host *host, unsigned int reg)
-{
-	return readl(host->addr + reg);
-}
-
-static inline void sh_mmcif_writel(struct sh_mmcif_host *host,
-					unsigned int reg, u32 val)
-{
-	writel(val, host->addr + reg);
-}
 
 static inline void sh_mmcif_bitset(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(val | sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(val | readl(host->addr + reg), host->addr + reg);
 }
 
 static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(~val & sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(~val & readl(host->addr + reg), host->addr + reg);
 }
 
 
@@ -253,10 +224,10 @@ static void sh_mmcif_sync_reset(struct sh_mmcif_host *host)
 {
 	u32 tmp;
 
-	tmp = 0x010f0000 & sh_mmcif_readl(host, MMCIF_CE_CLK_CTRL);
+	tmp = 0x010f0000 & sh_mmcif_readl(host->addr, MMCIF_CE_CLK_CTRL);
 
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_ON);
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_OFF);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF);
 	sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp |
 		SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 	/* byte swap on */
@@ -271,12 +242,10 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 	host->sd_error = 0;
 	host->wait_int = 0;
 
-	state1 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS1);
-	state2 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS2);
-	pr_debug("%s: ERR HOST_STS1 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS1));
-	pr_debug("%s: ERR HOST_STS2 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS2));
+	state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1);
+	state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2);
+	pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1);
+	pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2);
 
 	if (state1 & STS1_CMDSEQ) {
 		sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
@@ -288,7 +257,7 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 					"command sequence timeout err\n");
 				return -EIO;
 			}
-			if (!(sh_mmcif_readl(host, MMCIF_CE_HOST_STS1)
+			if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
 								& STS1_CMDSEQ))
 				break;
 			mdelay(1);
@@ -330,9 +299,9 @@ static int sh_mmcif_single_read(struct sh_mmcif_host *host,
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+		*p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA);
 
 	/* buffer read end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
@@ -353,7 +322,8 @@ static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
 	long time;
 	u32 blocksize, i, j, sec, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
 		host->wait_int = 0;
@@ -370,7 +340,8 @@ static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+				*p++ = sh_mmcif_readl(host->addr,
+						      MMCIF_CE_DATA);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -397,9 +368,9 @@ static int sh_mmcif_single_write(struct sh_mmcif_host *host,
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+		sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++);
 
 	/* buffer write end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
@@ -421,7 +392,8 @@ static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
 	long time;
 	u32 i, sec, j, blocksize, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
@@ -439,7 +411,8 @@ static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+				sh_mmcif_writel(host->addr,
+						MMCIF_CE_DATA, *p++);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -451,18 +424,18 @@ static void sh_mmcif_get_response(struct sh_mmcif_host *host,
 						struct mmc_command *cmd)
 {
 	if (cmd->flags & MMC_RSP_136) {
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP3);
-		cmd->resp[1] = sh_mmcif_readl(host, MMCIF_CE_RESP2);
-		cmd->resp[2] = sh_mmcif_readl(host, MMCIF_CE_RESP1);
-		cmd->resp[3] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP3);
+		cmd->resp[1] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP2);
+		cmd->resp[2] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP1);
+		cmd->resp[3] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 	} else
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 }
 
 static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host,
 						struct mmc_command *cmd)
 {
-	cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP_CMD12);
+	cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP_CMD12);
 }
 
 static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
@@ -596,18 +569,19 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 		MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO;
 
 	if (host->data) {
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, 0);
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, mrq->data->blksz);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET,
+				mrq->data->blksz);
 	}
 	opc = sh_mmcif_set_cmd(host, mrq, cmd, opc);
 
-	sh_mmcif_writel(host, MMCIF_CE_INT, 0xD80430C0);
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, mask);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask);
 	/* set arg */
-	sh_mmcif_writel(host, MMCIF_CE_ARG, cmd->arg);
+	sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
 	host->wait_int = 0;
 	/* set cmd */
-	sh_mmcif_writel(host, MMCIF_CE_CMD_SET, opc);
+	sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
 
 	time = wait_event_interruptible_timeout(host->intr_wait,
 		host->wait_int == 1 || host->sd_error == 1, host->timeout);
@@ -752,43 +726,44 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 	u32 state = 0;
 	int err = 0;
 
-	state = sh_mmcif_readl(host, MMCIF_CE_INT);
+	state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
 
 	if (state & INT_RBSYE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~(INT_RBSYE | INT_CRSPE));
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+				~(INT_RBSYE | INT_CRSPE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE);
 	} else if (state & INT_CRSPE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_CRSPE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE);
 	} else if (state & INT_BUFREN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFREN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 	} else if (state & INT_BUFWEN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFWEN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 	} else if (state & INT_CMD12DRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 			~(INT_CMD12DRE | INT_CMD12RBE |
 			  INT_CMD12CRE | INT_BUFRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
 	} else if (state & INT_BUFRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFRE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
 	} else if (state & INT_DTRANE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_DTRANE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
 	} else if (state & INT_CMD12RBE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 				~(INT_CMD12RBE | INT_CMD12CRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
 	} else if (state & INT_ERR_STS) {
 		/* err interrupts */
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	} else {
 		pr_debug("%s: Not support int\n", DRIVER_NAME);
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	}
@@ -894,12 +869,12 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 		goto clean_up2;
 	}
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 	sh_mmcif_detect(host->mmc);
 
 	pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
 	pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME,
-			sh_mmcif_readl(host, MMCIF_CE_VERSION) & 0x0000ffff);
+		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
 	return ret;
 
 clean_up2:
@@ -917,7 +892,7 @@ static int __devexit sh_mmcif_remove(struct platform_device *pdev)
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
 	int irq[2];
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index eb476b7f8d1..f4ce273e93f 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -234,7 +234,6 @@ static int __devexit pismo_remove(struct i2c_client *client)
 	/* FIXME: set_vpp needs saner arguments */
 	pismo_setvpp_remove_fix(pismo);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(pismo);
 
 	return 0;
@@ -286,7 +285,6 @@ static int __devinit pismo_probe(struct i2c_client *client,
 	return 0;
 
  exit_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(pismo);
 	return ret;
 }
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 000d65ea55a..91c8013cf0d 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -404,14 +404,9 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
 
-	ops.oobbuf = kmalloc(length, GFP_KERNEL);
-	if (!ops.oobbuf)
-		return -ENOMEM;
-
-	if (copy_from_user(ops.oobbuf, ptr, length)) {
-		kfree(ops.oobbuf);
-		return -EFAULT;
-	}
+	ops.oobbuf = memdup_user(ptr, length);
+	if (IS_ERR(ops.oobbuf))
+		return PTR_ERR(ops.oobbuf);
 
 	start &= ~((uint64_t)mtd->oobsize - 1);
 	ret = mtd->write_oob(mtd, start, &ops);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 98a04b3c952..ffc3720929f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,13 +1,3 @@
-menuconfig MTD_NAND
-	tristate "NAND Device Support"
-	depends on MTD
-	select MTD_NAND_IDS
-	select MTD_NAND_ECC
-	help
-	  This enables support for accessing all type of NAND flash
-	  devices. For further information see
-	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
-
 config MTD_NAND_ECC
 	tristate
 
@@ -19,6 +9,17 @@ config MTD_NAND_ECC_SMC
 	  Software ECC according to the Smart Media Specification.
 	  The original Linux implementation had byte 0 and 1 swapped.
 
+
+menuconfig MTD_NAND
+	tristate "NAND Device Support"
+	depends on MTD
+	select MTD_NAND_IDS
+	select MTD_NAND_ECC
+	help
+	  This enables support for accessing all type of NAND flash
+	  devices. For further information see
+	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
 if MTD_NAND
 
 config MTD_NAND_VERIFY_WRITE
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 00aea6f7d1f..1312eda57ba 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -232,7 +232,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 	if (!fun)
 		return -ENOMEM;
 
-	ret = of_address_to_resource(ofdev->node, 0, &io_res);
+	ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
 	if (ret) {
 		dev_err(&ofdev->dev, "can't get IO base\n");
 		goto err1;
@@ -244,7 +244,8 @@ static int __devinit fun_probe(struct of_device *ofdev,
 		goto err1;
 	}
 
-	prop = of_get_property(ofdev->node, "fsl,upm-addr-offset", &size);
+	prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
+			       &size);
 	if (!prop || size != sizeof(uint32_t)) {
 		dev_err(&ofdev->dev, "can't get UPM address offset\n");
 		ret = -EINVAL;
@@ -252,7 +253,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 	}
 	fun->upm_addr_offset = *prop;
 
-	prop = of_get_property(ofdev->node, "fsl,upm-cmd-offset", &size);
+	prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
 	if (!prop || size != sizeof(uint32_t)) {
 		dev_err(&ofdev->dev, "can't get UPM command offset\n");
 		ret = -EINVAL;
@@ -260,7 +261,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 	}
 	fun->upm_cmd_offset = *prop;
 
-	prop = of_get_property(ofdev->node,
+	prop = of_get_property(ofdev->dev.of_node,
 			       "fsl,upm-addr-line-cs-offsets", &size);
 	if (prop && (size / sizeof(uint32_t)) > 0) {
 		fun->mchip_count = size / sizeof(uint32_t);
@@ -276,7 +277,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 
 	for (i = 0; i < fun->mchip_count; i++) {
 		fun->rnb_gpio[i] = -1;
-		rnb_gpio = of_get_gpio(ofdev->node, i);
+		rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
 		if (rnb_gpio >= 0) {
 			ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
 			if (ret) {
@@ -292,13 +293,13 @@ static int __devinit fun_probe(struct of_device *ofdev,
 		}
 	}
 
-	prop = of_get_property(ofdev->node, "chip-delay", NULL);
+	prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
 	if (prop)
 		fun->chip_delay = *prop;
 	else
 		fun->chip_delay = 50;
 
-	prop = of_get_property(ofdev->node, "fsl,upm-wait-flags", &size);
+	prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
 	if (prop && size == sizeof(uint32_t))
 		fun->wait_flags = *prop;
 	else
@@ -315,7 +316,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 	fun->dev = &ofdev->dev;
 	fun->last_ctrl = NAND_CLE;
 
-	ret = fun_chip_init(fun, ofdev->node, &io_res);
+	ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
 	if (ret)
 		goto err2;
 
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 3d0867d829c..0a130dcaa12 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -650,7 +650,7 @@ static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
 static int __devinit mpc5121_nfc_probe(struct of_device *op,
 					const struct of_device_id *match)
 {
-	struct device_node *rootnode, *dn = op->node;
+	struct device_node *rootnode, *dn = op->dev.of_node;
 	struct device *dev = &op->dev;
 	struct mpc5121_nfc_prv *prv;
 	struct resource res;
@@ -889,12 +889,12 @@ static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
 };
 
 static struct of_platform_driver mpc5121_nfc_driver = {
-	.match_table	= mpc5121_nfc_match,
 	.probe		= mpc5121_nfc_probe,
 	.remove		= __devexit_p(mpc5121_nfc_remove),
 	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = mpc5121_nfc_match,
 	},
 };
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 82e94389824..0d76b169482 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		else
 			host->buf_start = column + mtd->writesize;
 
-		if (mtd->writesize > 512)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
+		command = NAND_CMD_READ0; /* only READ0 is valid */
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (mtd->writesize > 512)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
-
-			host->buf_start = column;
-
-			/* Set program pointer to spare region */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->buf_start = column;
+		if (column >= mtd->writesize)
+			/* call ourself to read a page */
+			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
 
-			/* Set program pointer to page start */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
+		host->buf_start = column;
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -853,6 +832,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
 	if (nr_parts > 0)
 		add_mtd_partitions(mtd, host->parts, nr_parts);
+	else if (pdata->parts)
+		add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
 	{
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 78a42329547..bcfc851fe55 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -150,7 +150,6 @@ static void r852_dma_done(struct r852_device *dev, int error)
 	if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
 		pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
 			dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
-	complete(&dev->dma_done);
 }
 
 /*
@@ -182,6 +181,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
 	/* Set dma direction */
 	dev->dma_dir = do_read;
 	dev->dma_stage = 1;
+	INIT_COMPLETION(dev->dma_done);
 
 	dbg_verbose("doing dma %s ", do_read ? "read" : "write");
 
@@ -494,6 +494,11 @@ int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
 	if (dev->card_unstable)
 		return 0;
 
+	if (dev->dma_error) {
+		dev->dma_error = 0;
+		return -1;
+	}
+
 	r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
 	ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
 	r852_write_reg(dev, R852_CTL, dev->ctlreg);
@@ -707,6 +712,7 @@ void r852_card_detect_work(struct work_struct *work)
 		container_of(work, struct r852_device, card_detect_work.work);
 
 	r852_card_update_present(dev);
+	r852_update_card_detect(dev);
 	dev->card_unstable = 0;
 
 	/* False alarm */
@@ -722,7 +728,6 @@ void r852_card_detect_work(struct work_struct *work)
 	else
 		r852_unregister_nand_device(dev);
 exit:
-	/* Update detection logic */
 	r852_update_card_detect(dev);
 }
 
@@ -796,6 +801,7 @@ static irqreturn_t r852_irq(int irq, void *data)
 		if (dma_status & R852_DMA_IRQ_ERROR) {
 			dbg("recieved dma error IRQ");
 			r852_dma_done(dev, -EIO);
+			complete(&dev->dma_done);
 			goto out;
 		}
 
@@ -825,8 +831,10 @@ static irqreturn_t r852_irq(int irq, void *data)
 			r852_dma_enable(dev);
 
 		/* Operation done */
-		if (dev->dma_stage == 3)
+		if (dev->dma_stage == 3) {
 			r852_dma_done(dev, 0);
+			complete(&dev->dma_done);
+		}
 		goto out;
 	}
 
@@ -940,18 +948,19 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 
 	r852_dma_test(dev);
 
+	dev->irq = pci_dev->irq;
+	spin_lock_init(&dev->irqlock);
+
+	dev->card_detected = 0;
+	r852_card_update_present(dev);
+
 	/*register irq handler*/
 	error = -ENODEV;
 	if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
 			  DRV_NAME, dev))
 		goto error10;
 
-	dev->irq = pci_dev->irq;
-	spin_lock_init(&dev->irqlock);
-
 	/* kick initial present test */
-	dev->card_detected = 0;
-	r852_card_update_present(dev);
 	queue_delayed_work(dev->card_workqueue,
 		&dev->card_detect_work, 0);
 
@@ -1081,7 +1090,7 @@ int r852_resume(struct device *device)
 			dev->card_detected ? "added" : "removed");
 
 		queue_delayed_work(dev->card_workqueue,
-		&dev->card_detect_work, 1000);
+		&dev->card_detect_work, msecs_to_jiffies(1000));
 		return 0;
 	}
 
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index 884852dc7eb..cc728b12de8 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -183,7 +183,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
 		return -ENOMEM;
 	}
 
-	host->io_base = of_iomap(ofdev->node, 0);
+	host->io_base = of_iomap(ofdev->dev.of_node, 0);
 	if (host->io_base == NULL) {
 		printk(KERN_ERR "socrates_nand: ioremap failed\n");
 		kfree(host);
@@ -244,7 +244,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
 #ifdef CONFIG_MTD_OF_PARTS
 	if (num_partitions == 0) {
 		num_partitions = of_mtd_parse_partitions(&ofdev->dev,
-							 ofdev->node,
+							 ofdev->dev.of_node,
 							 &partitions);
 		if (num_partitions < 0) {
 			res = num_partitions;
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 13b05cb33b0..78ae89488a4 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -593,6 +593,7 @@ static int attach_by_scanning(struct ubi_device *ubi)
 	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
 	ubi->max_ec = si->max_ec;
 	ubi->mean_ec = si->mean_ec;
+	ubi_msg("max. sequence number:       %llu", si->max_sqnum);
 
 	err = ubi_read_volume_table(ubi, si);
 	if (err)
@@ -981,7 +982,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
-	ubi_msg("image sequence number: %d", ubi->image_seq);
+	ubi_msg("image sequence number:  %d", ubi->image_seq);
 
 	/*
 	 * The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 9f87c99189a..fe74749e0da 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -418,7 +418,8 @@ retry:
 				 * may try to recover data. FIXME: but this is
 				 * not implemented.
 				 */
-				if (err == UBI_IO_BAD_VID_HDR) {
+				if (err == UBI_IO_BAD_HDR_READ ||
+				    err == UBI_IO_BAD_HDR) {
 					ubi_warn("corrupted VID header at PEB "
 						 "%d, LEB %d:%d", pnum, vol_id,
 						 lnum);
@@ -961,8 +962,8 @@ write_error:
  */
 static int is_error_sane(int err)
 {
-	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR ||
-	    err == -ETIMEDOUT)
+	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
+	    err == UBI_IO_BAD_HDR_READ || err == -ETIMEDOUT)
 		return 0;
 	return 1;
 }
@@ -1165,6 +1166,44 @@ out_unlock_leb:
 }
 
 /**
+ * print_rsvd_warning - warn about not having enough reserved PEBs.
+ * @ubi: UBI device description object
+ *
+ * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI
+ * cannot reserve enough PEBs for bad block handling. This function makes a
+ * decision whether we have to print a warning or not. The algorithm is as
+ * follows:
+ *   o if this is a new UBI image, then just print the warning
+ *   o if this is an UBI image which has already been used for some time, print
+ *     a warning only if we can reserve less than 10% of the expected amount of
+ *     the reserved PEB.
+ *
+ * The idea is that when UBI is used, PEBs become bad, and the reserved pool
+ * of PEBs becomes smaller, which is normal and we do not want to scare users
+ * with a warning every time they attach the MTD device. This was an issue
+ * reported by real users.
+ */
+static void print_rsvd_warning(struct ubi_device *ubi,
+			       struct ubi_scan_info *si)
+{
+	/*
+	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
+	 * large number to distinguish between newly flashed and used images.
+	 */
+	if (si->max_sqnum > (1 << 18)) {
+		int min = ubi->beb_rsvd_level / 10;
+
+		if (!min)
+			min = 1;
+		if (ubi->beb_rsvd_pebs > min)
+			return;
+	}
+
+	ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d,"
+		 " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+}
+
+/**
  * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
@@ -1236,9 +1275,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			ubi_warn("cannot reserve enough PEBs for bad PEB "
-				 "handling, reserved %d, need %d",
-				 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+			print_rsvd_warning(ubi, si);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 4b979e34b15..332f992f13d 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -150,6 +150,8 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
 retry:
 	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
 	if (err) {
+		const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+
 		if (err == -EUCLEAN) {
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
@@ -165,15 +167,15 @@ retry:
 		}
 
 		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d,"
+			dbg_io("error %d%s while reading %d bytes from PEB %d:%d,"
 			       " read only %zd bytes, retry",
-			       err, len, pnum, offset, read);
+			       err, errstr, len, pnum, offset, read);
 			yield();
 			goto retry;
 		}
 
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
+		ubi_err("error %d%s while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, errstr, len, pnum, offset, read);
 		ubi_dbg_dump_stack();
 
 		/*
@@ -515,7 +517,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 	 * In this case we probably anyway have garbage in this PEB.
 	 */
 	err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
-	if (err1 == UBI_IO_BAD_VID_HDR)
+	if (err1 == UBI_IO_BAD_HDR_READ || err1 == UBI_IO_BAD_HDR)
 		/*
 		 * The VID header is corrupted, so we can safely erase this
 		 * PEB and not afraid that it will be treated as a valid PEB in
@@ -709,7 +711,7 @@ bad:
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon (but may be not);
- * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
  * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
  * o a negative error code in case of failure.
  */
@@ -736,23 +738,21 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		 * header is still OK, we just report this as there was a
 		 * bit-flip.
 		 */
-		read_err = err;
+		if (err == -EBADMSG)
+			read_err = UBI_IO_BAD_HDR_READ;
 	}
 
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
+		if (read_err)
+			return read_err;
+
 		/*
 		 * The magic field is wrong. Let's check if we have read all
 		 * 0xFF. If yes, this physical eraseblock is assumed to be
 		 * empty.
-		 *
-		 * But if there was a read error, we do not test it for all
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and we anyway cannot treat it as empty.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+		if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
 			if (verbose)
 				ubi_warn("no EC header found at PEB %d, "
@@ -774,7 +774,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad magic number at PEB %d: %08x instead of "
 				"%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-		return UBI_IO_BAD_EC_HDR;
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -788,7 +788,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad EC header CRC at PEB %d, calculated "
 				"%#08x, read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_EC_HDR;
+		return read_err ?: UBI_IO_BAD_HDR;
 	}
 
 	/* And of course validate what has just been read from the media */
@@ -798,6 +798,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was %-EBADMSG, but the header CRC is still OK, report about
+	 * a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
@@ -977,7 +981,7 @@ bad:
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC
+ * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC
  *   error detected);
  * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
  *   header there);
@@ -1008,22 +1012,20 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		 * CRC check-sum and we will identify this. If the VID header is
 		 * still OK, we just report this as there was a bit-flip.
 		 */
-		read_err = err;
+		if (err == -EBADMSG)
+			read_err = UBI_IO_BAD_HDR_READ;
 	}
 
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
+		if (read_err)
+			return read_err;
+
 		/*
 		 * If we have read all 0xFF bytes, the VID header probably does
 		 * not exist and the physical eraseblock is assumed to be free.
-		 *
-		 * But if there was a read error, we do not test the data for
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and it cannot be regarded as free.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
+		if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly free */
 			if (verbose)
 				ubi_warn("no VID header found at PEB %d, "
@@ -1045,7 +1047,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad magic number at PEB %d: %08x instead of "
 				"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-		return UBI_IO_BAD_VID_HDR;
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
@@ -1059,7 +1061,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad CRC at PEB %d, calculated %#08x, "
 				"read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_VID_HDR;
+		return read_err ?: UBI_IO_BAD_HDR;
 	}
 
 	/* Validate the VID header that we have just read */
@@ -1069,6 +1071,10 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was a read error (%-EBADMSG), but the header CRC is still
+	 * OK, report about a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index aed19f33b8f..372a15ac999 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -44,6 +44,7 @@
 #include <linux/slab.h>
 #include <linux/crc32.h>
 #include <linux/math64.h>
+#include <linux/random.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -72,16 +73,19 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
 {
 	struct ubi_scan_leb *seb;
 
-	if (list == &si->free)
+	if (list == &si->free) {
 		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->erase)
+		si->free_peb_count += 1;
+	} else if (list == &si->erase) {
 		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->corr) {
+		si->erase_peb_count += 1;
+	} else if (list == &si->corr) {
 		dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
-		si->corr_count += 1;
-	} else if (list == &si->alien)
+		si->corr_peb_count += 1;
+	} else if (list == &si->alien) {
 		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
-	else
+		si->alien_peb_count += 1;
+	} else
 		BUG();
 
 	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
@@ -517,6 +521,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	sv->leb_count += 1;
 	rb_link_node(&seb->u.rb, parent, p);
 	rb_insert_color(&seb->u.rb, &sv->root);
+	si->used_peb_count += 1;
 	return 0;
 }
 
@@ -745,19 +750,17 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		bitflips = 1;
 	else if (err == UBI_IO_PEB_EMPTY)
 		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
-	else if (err == UBI_IO_BAD_EC_HDR) {
+	else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR) {
 		/*
 		 * We have to also look at the VID header, possibly it is not
 		 * corrupted. Set %bitflips flag in order to make this PEB be
 		 * moved and EC be re-created.
 		 */
-		ec_corr = 1;
+		ec_corr = err;
 		ec = UBI_SCAN_UNKNOWN_EC;
 		bitflips = 1;
 	}
 
-	si->is_empty = 0;
-
 	if (!ec_corr) {
 		int image_seq;
 
@@ -813,9 +816,12 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		return err;
 	else if (err == UBI_IO_BITFLIPS)
 		bitflips = 1;
-	else if (err == UBI_IO_BAD_VID_HDR ||
+	else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR ||
 		 (err == UBI_IO_PEB_FREE && ec_corr)) {
 		/* VID header is corrupted */
+		if (err == UBI_IO_BAD_HDR_READ ||
+		    ec_corr == UBI_IO_BAD_HDR_READ)
+			si->read_err_count += 1;
 		err = add_to_list(si, pnum, ec, &si->corr);
 		if (err)
 			return err;
@@ -836,11 +842,11 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		switch (vidh->compat) {
 		case UBI_COMPAT_DELETE:
 			ubi_msg("\"delete\" compatible internal volume %d:%d"
-				" found, remove it", vol_id, lnum);
+				" found, will remove it", vol_id, lnum);
 			err = add_to_list(si, pnum, ec, &si->corr);
 			if (err)
 				return err;
-			break;
+			return 0;
 
 		case UBI_COMPAT_RO:
 			ubi_msg("read-only compatible internal volume %d:%d"
@@ -855,7 +861,6 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			err = add_to_list(si, pnum, ec, &si->alien);
 			if (err)
 				return err;
-			si->alien_peb_count += 1;
 			return 0;
 
 		case UBI_COMPAT_REJECT:
@@ -886,6 +891,85 @@ adjust_mean_ec:
 }
 
 /**
+ * check_what_we_have - check what PEB were found by scanning.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This is a helper function which takes a look what PEBs were found by
+ * scanning, and decides whether the flash is empty and should be formatted and
+ * whether there are too many corrupted PEBs and we should not attach this
+ * MTD device. Returns zero if we should proceed with attaching the MTD device,
+ * and %-EINVAL if we should not.
+ */
+static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	struct ubi_scan_leb *seb;
+	int max_corr;
+
+	max_corr = ubi->peb_count - si->bad_peb_count - si->alien_peb_count;
+	max_corr = max_corr / 20 ?: 8;
+
+	/*
+	 * Few corrupted PEBs are not a problem and may be just a result of
+	 * unclean reboots. However, many of them may indicate some problems
+	 * with the flash HW or driver.
+	 */
+	if (si->corr_peb_count >= 8) {
+		ubi_warn("%d PEBs are corrupted", si->corr_peb_count);
+		printk(KERN_WARNING "corrupted PEBs are:");
+		list_for_each_entry(seb, &si->corr, u.list)
+			printk(KERN_CONT " %d", seb->pnum);
+		printk(KERN_CONT "\n");
+
+		/*
+		 * If too many PEBs are corrupted, we refuse attaching,
+		 * otherwise, only print a warning.
+		 */
+		if (si->corr_peb_count >= max_corr) {
+			ubi_err("too many corrupted PEBs, refusing this device");
+			return -EINVAL;
+		}
+	}
+
+	if (si->free_peb_count + si->used_peb_count +
+	    si->alien_peb_count == 0) {
+		/* No UBI-formatted eraseblocks were found */
+		if (si->corr_peb_count == si->read_err_count &&
+		    si->corr_peb_count < 8) {
+			/* No or just few corrupted PEBs, and all of them had a
+			 * read error. We assume that those are bad PEBs, which
+			 * were just not marked as bad so far.
+			 *
+			 * This piece of code basically tries to distinguish
+			 * between the following 2 situations:
+			 *
+			 * 1. Flash is empty, but there are few bad PEBs, which
+			 *    are not marked as bad so far, and which were read
+			 *    with error. We want to go ahead and format this
+			 *    flash. While formating, the faulty PEBs will
+			 *    probably be marked as bad.
+			 *
+			 * 2. Flash probably contains non-UBI data and we do
+			 * not want to format it and destroy possibly needed
+			 * data (e.g., consider the case when the bootloader
+			 * MTD partition was accidentally fed to UBI).
+			 */
+			si->is_empty = 1;
+			ubi_msg("empty MTD device detected");
+			get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq));
+		} else {
+			ubi_err("MTD device possibly contains non-UBI data, "
+				"refusing it");
+			return -EINVAL;
+		}
+	}
+
+	if (si->corr_peb_count > 0)
+		ubi_msg("corrupted PEBs will be formatted");
+	return 0;
+}
+
+/**
  * ubi_scan - scan an MTD device.
  * @ubi: UBI device description object
  *
@@ -909,7 +993,6 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	INIT_LIST_HEAD(&si->erase);
 	INIT_LIST_HEAD(&si->alien);
 	si->volumes = RB_ROOT;
-	si->is_empty = 1;
 
 	err = -ENOMEM;
 	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
@@ -935,21 +1018,9 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	if (si->ec_count)
 		si->mean_ec = div_u64(si->ec_sum, si->ec_count);
 
-	if (si->is_empty)
-		ubi_msg("empty MTD device detected");
-
-	/*
-	 * Few corrupted PEBs are not a problem and may be just a result of
-	 * unclean reboots. However, many of them may indicate some problems
-	 * with the flash HW or driver. Print a warning in this case.
-	 */
-	if (si->corr_count >= 8 || si->corr_count >= ubi->peb_count / 4) {
-		ubi_warn("%d PEBs are corrupted", si->corr_count);
-		printk(KERN_WARNING "corrupted PEBs are:");
-		list_for_each_entry(seb, &si->corr, u.list)
-			printk(KERN_CONT " %d", seb->pnum);
-		printk(KERN_CONT "\n");
-	}
+	err = check_what_we_have(ubi, si);
+	if (err)
+		goto out_vidh;
 
 	/*
 	 * In case of unknown erase counter we use the mean erase counter
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index ff179ad7ca5..2576a8d1532 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -91,10 +91,16 @@ struct ubi_scan_volume {
  * @erase: list of physical eraseblocks which have to be erased
  * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
  *         those belonging to "preserve"-compatible internal volumes)
+ * @used_peb_count: count of used PEBs
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @read_err_count: count of PEBs read with error (%UBI_IO_BAD_HDR_READ was
+ *                  returned)
+ * @free_peb_count: count of PEBs in the @free list
+ * @erase_peb_count: count of PEBs in the @erase list
+ * @alien_peb_count: count of PEBs in the @alien list
  * @bad_peb_count: count of bad physical eraseblocks
  * @vols_found: number of volumes found during scanning
  * @highest_vol_id: highest volume ID
- * @alien_peb_count: count of physical eraseblocks in the @alien list
  * @is_empty: flag indicating whether the MTD device is empty or not
  * @min_ec: lowest erase counter value
  * @max_ec: highest erase counter value
@@ -102,7 +108,6 @@ struct ubi_scan_volume {
  * @mean_ec: mean erase counter value
  * @ec_sum: a temporary variable used when calculating @mean_ec
  * @ec_count: a temporary variable used when calculating @mean_ec
- * @corr_count: count of corrupted PEBs
  *
  * This data structure contains the result of scanning and may be used by other
  * UBI sub-systems to build final UBI data structures, further error-recovery
@@ -114,10 +119,15 @@ struct ubi_scan_info {
 	struct list_head free;
 	struct list_head erase;
 	struct list_head alien;
+	int used_peb_count;
+	int corr_peb_count;
+	int read_err_count;
+	int free_peb_count;
+	int erase_peb_count;
+	int alien_peb_count;
 	int bad_peb_count;
 	int vols_found;
 	int highest_vol_id;
-	int alien_peb_count;
 	int is_empty;
 	int min_ec;
 	int max_ec;
@@ -125,7 +135,6 @@ struct ubi_scan_info {
 	int mean_ec;
 	uint64_t ec_sum;
 	int ec_count;
-	int corr_count;
 };
 
 struct ubi_device;
@@ -135,7 +144,7 @@ struct ubi_vid_hdr;
  * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
  *
  * @sv: volume scanning information
- * @seb: scanning eraseblock infprmation
+ * @seb: scanning eraseblock information
  * @list: the list to move to
  */
 static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index a637f0283ad..0359e0cce48 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -89,16 +89,16 @@
  *                   %0xFF bytes
  * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
  *                  valid erase counter header, and the rest are %0xFF bytes
- * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
- * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- *                     CRC)
+ * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
+ * UBI_IO_BAD_HDR_READ: the same as %UBI_IO_BAD_HDR, but also there was a read
+ * 			error reported by the flash driver
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
  */
 enum {
 	UBI_IO_PEB_EMPTY = 1,
 	UBI_IO_PEB_FREE,
-	UBI_IO_BAD_EC_HDR,
-	UBI_IO_BAD_VID_HDR,
+	UBI_IO_BAD_HDR,
+	UBI_IO_BAD_HDR_READ,
 	UBI_IO_BITFLIPS
 };
 
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 39250b2ca88..959add2410b 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1654,8 +1654,11 @@ MODULE_DEVICE_TABLE (of, bmac_match);
 
 static struct macio_driver bmac_driver =
 {
-	.name 		= "bmac",
-	.match_table	= bmac_match,
+	.driver = {
+		.name 		= "bmac",
+		.owner		= THIS_MODULE,
+		.of_match_table	= bmac_match,
+	},
 	.probe		= bmac_probe,
 	.remove		= bmac_remove,
 #ifdef CONFIG_PM
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 1d973db27c3..d7de376d717 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1022,7 +1022,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init dec_lance_probe(struct device *bdev, const int type)
+static int __devinit dec_lance_probe(struct device *bdev, const int type)
 {
 	static unsigned version_printed;
 	static const char fmt[] = "declance%d";
@@ -1326,7 +1326,7 @@ static void __exit dec_lance_platform_remove(void)
 }
 
 #ifdef CONFIG_TC
-static int __init dec_lance_tc_probe(struct device *dev);
+static int __devinit dec_lance_tc_probe(struct device *dev);
 static int __exit dec_lance_tc_remove(struct device *dev);
 
 static const struct tc_device_id dec_lance_tc_table[] = {
@@ -1345,7 +1345,7 @@ static struct tc_driver dec_lance_tc_driver = {
 	},
 };
 
-static int __init dec_lance_tc_probe(struct device *dev)
+static int __devinit dec_lance_tc_probe(struct device *dev)
 {
         int status = dec_lance_probe(dev, PMAD_LANCE);
         if (!status)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 9e9164a9d48..36d31a41632 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2928,10 +2928,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 			 * dropped transactions.
 			 */
 			pm_qos_update_request(
-				adapter->netdev->pm_qos_req, 55);
+				&adapter->netdev->pm_qos_req, 55);
 		} else {
 			pm_qos_update_request(
-				adapter->netdev->pm_qos_req,
+				&adapter->netdev->pm_qos_req,
 				PM_QOS_DEFAULT_VALUE);
 		}
 	}
@@ -3527,9 +3527,9 @@ static int e1000_open(struct net_device *netdev)
 
 	/* DMA latency requirement to workaround early-receive/jumbo issue */
 	if (adapter->flags & FLAG_HAS_ERT)
-		adapter->netdev->pm_qos_req =
-		                    pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-		                                       PM_QOS_DEFAULT_VALUE);
+		pm_qos_add_request(&adapter->netdev->pm_qos_req,
+				   PM_QOS_CPU_DMA_LATENCY,
+				   PM_QOS_DEFAULT_VALUE);
 
 	/*
 	 * before we allocate an interrupt, we must be ready to handle it.
@@ -3635,10 +3635,8 @@ static int e1000_close(struct net_device *netdev)
 	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
-	if (adapter->flags & FLAG_HAS_ERT) {
-		pm_qos_remove_request(adapter->netdev->pm_qos_req);
-		adapter->netdev->pm_qos_req = NULL;
-	}
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_request(&adapter->netdev->pm_qos_req);
 
 	pm_runtime_put_sync(&pdev->dev);
 
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 0f90685d3d1..3607340f3da 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -169,7 +169,7 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 
 	new_bus->name = "CPM2 Bitbanged MII",
 
-	ret = fs_mii_bitbang_init(new_bus, ofdev->node);
+	ret = fs_mii_bitbang_init(new_bus, ofdev->dev.of_node);
 	if (ret)
 		goto out_free_bus;
 
@@ -181,7 +181,7 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	new_bus->parent = &ofdev->dev;
 	dev_set_drvdata(&ofdev->dev, new_bus);
 
-	ret = of_mdiobus_register(new_bus, ofdev->node);
+	ret = of_mdiobus_register(new_bus, ofdev->dev.of_node);
 	if (ret)
 		goto out_free_irqs;
 
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 048595bc79a..ec808fa8dc2 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -48,7 +48,7 @@
 #define DRV_VERSION "1.0.0-k0"
 char igbvf_driver_name[] = "igbvf";
 const char igbvf_driver_version[] = DRV_VERSION;
-struct pm_qos_request_list *igbvf_driver_pm_qos_req;
+static struct pm_qos_request_list igbvf_driver_pm_qos_req;
 static const char igbvf_driver_string[] =
 				"Intel(R) Virtual Function Network Driver";
 static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
@@ -2902,8 +2902,8 @@ static int __init igbvf_init_module(void)
 	printk(KERN_INFO "%s\n", igbvf_copyright);
 
 	ret = pci_register_driver(&igbvf_driver);
-	igbvf_driver_pm_qos_req = pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-	                       PM_QOS_DEFAULT_VALUE);
+	pm_qos_add_request(&igbvf_driver_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
 
 	return ret;
 }
@@ -2918,8 +2918,7 @@ module_init(igbvf_init_module);
 static void __exit igbvf_exit_module(void)
 {
 	pci_unregister_driver(&igbvf_driver);
-	pm_qos_remove_request(igbvf_driver_pm_qos_req);
-	igbvf_driver_pm_qos_req = NULL;
+	pm_qos_remove_request(&igbvf_driver_pm_qos_req);
 }
 module_exit(igbvf_exit_module);
 
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index b6855a6476f..1c5221f79d6 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -997,8 +997,11 @@ MODULE_DEVICE_TABLE (of, mace_match);
 
 static struct macio_driver mace_driver =
 {
-	.name 		= "mace",
-	.match_table	= mace_match,
+	.driver = {
+		.name 		= "mace",
+		.owner		= THIS_MODULE,
+		.of_match_table	= mace_match,
+	},
 	.probe		= mace_probe,
 	.remove		= mace_remove,
 };
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 721a090a01b..0101f2bdf40 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
+#include <linux/marvell_phy.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,8 +49,6 @@
 #define MII_M1145_RGMII_RX_DELAY	0x0080
 #define MII_M1145_RGMII_TX_DELAY	0x0002
 
-#define M1145_DEV_FLAGS_RESISTANCE	0x00000001
-
 #define MII_M1111_PHY_LED_CONTROL	0x18
 #define MII_M1111_PHY_LED_DIRECT	0x4100
 #define MII_M1111_PHY_LED_COMBINE	0x411c
@@ -407,7 +406,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Adjust LED Control */
-	err = phy_write(phydev, 0x10, 0x021e);
+	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+		err = phy_write(phydev, 0x10, 0x1100);
+	else
+		err = phy_write(phydev, 0x10, 0x021e);
 	if (err < 0)
 		return err;
 
@@ -455,7 +457,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
 		if (err < 0)
 			return err;
 
-		if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+		if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
 			err = phy_write(phydev, 0x1d, 0x0012);
 			if (err < 0)
 				return err;
@@ -586,8 +588,8 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
 
 static struct phy_driver marvell_drivers[] = {
 	{
-		.phy_id = 0x01410c60,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1101,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -598,8 +600,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410c90,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1112,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1112",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -611,8 +613,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cc0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1111,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1111",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -624,8 +626,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e10,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1118,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1118",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -637,8 +639,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = {.owner = THIS_MODULE,},
 	},
 	{
-		.phy_id = 0x01410cb0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1121R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -650,8 +652,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e90,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88EC048,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88EC048",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -663,8 +665,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cd0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1145,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1145",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -676,8 +678,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e30,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1240,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 96096266007..5efa57757a2 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -367,8 +367,8 @@ static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, };
 static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
 
 
-#define dr32(reg)		readl(de->regs + (reg))
-#define dw32(reg,val)		writel((val), de->regs + (reg))
+#define dr32(reg)	ioread32(de->regs + (reg))
+#define dw32(reg, val)	iowrite32((val), de->regs + (reg))
 
 
 static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
@@ -1706,6 +1706,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
 		int value, boguscnt = 100000;
 		do {
 			value = dr32(ROMCmd);
+			rmb();
 		} while (value < 0 && --boguscnt > 0);
 		de->dev->dev_addr[i] = value;
 		udelay(1);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 5bbff4c5a48..c24c5efeae1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -174,7 +174,7 @@ that only one external action is invoked at a time.
 #define DRV_DESCRIPTION	"Intel(R) PRO/Wireless 2100 Network Driver"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2006 Intel Corporation"
 
-static struct pm_qos_request_list *ipw2100_pm_qos_req;
+static struct pm_qos_request_list ipw2100_pm_qos_req;
 
 /* Debugging stuff */
 #ifdef CONFIG_IPW2100_DEBUG
@@ -1741,7 +1741,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 	/* the ipw2100 hardware really doesn't want power management delays
 	 * longer than 175usec
 	 */
-	pm_qos_update_request(ipw2100_pm_qos_req, 175);
+	pm_qos_update_request(&ipw2100_pm_qos_req, 175);
 
 	/* If the interrupt is enabled, turn it off... */
 	spin_lock_irqsave(&priv->low_lock, flags);
@@ -1889,7 +1889,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
 	ipw2100_disable_interrupts(priv);
 	spin_unlock_irqrestore(&priv->low_lock, flags);
 
-	pm_qos_update_request(ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+	pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
 
 	/* We have to signal any supplicant if we are disassociating */
 	if (associated)
@@ -6665,8 +6665,8 @@ static int __init ipw2100_init(void)
 	if (ret)
 		goto out;
 
-	ipw2100_pm_qos_req = pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-			PM_QOS_DEFAULT_VALUE);
+	pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
 #ifdef CONFIG_IPW2100_DEBUG
 	ipw2100_debug_level = debug;
 	ret = driver_create_file(&ipw2100_pci_driver.driver,
@@ -6688,7 +6688,7 @@ static void __exit ipw2100_exit(void)
 			   &driver_attr_debug_level);
 #endif
 	pci_unregister_driver(&ipw2100_pci_driver);
-	pm_qos_remove_request(ipw2100_pm_qos_req);
+	pm_qos_remove_request(&ipw2100_pm_qos_req);
 }
 
 module_init(ipw2100_init);
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index 9bcee10c930..4a0a0e5265c 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -239,8 +239,11 @@ static struct of_device_id airport_match[] =
 MODULE_DEVICE_TABLE(of, airport_match);
 
 static struct macio_driver airport_driver = {
-	.name 		= DRIVER_NAME,
-	.match_table	= airport_match,
+	.driver = {
+		.name 		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= airport_match,
+	},
 	.probe		= airport_attach,
 	.remove		= airport_detach,
 	.suspend	= airport_suspend,
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 18dff43b8bd..c5c14dd3734 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -176,16 +176,18 @@ static ssize_t led_proc_write(struct file *file, const char *buf,
 	size_t count, loff_t *pos)
 {
 	void *data = PDE(file->f_path.dentry->d_inode)->data;
-	char *cur, lbuf[count + 1];
+	char *cur, lbuf[32];
 	int d;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
-	memset(lbuf, 0, count + 1);
+	if (count >= sizeof(lbuf))
+		count = sizeof(lbuf)-1;
 
 	if (copy_from_user(lbuf, buf, count))
 		return -EFAULT;
+	lbuf[count] = 0;
 
 	cur = lbuf;
 
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index b3e5580c837..4952c3b9379 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -828,7 +828,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pci_name(pdev), err);
 		return err;
 	}
+
 	bus = pdev->subordinate;
+	if (!bus) {
+		dev_notice(&pdev->dev, "the device is not a bridge, "
+				"skipping\n");
+		rc = -ENODEV;
+		goto err_disable_device;
+	}
 
 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
 	 * discovery
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 796828fce34..c9171be7456 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -340,7 +340,7 @@ int dmar_disabled = 0;
 int dmar_disabled = 1;
 #endif /*CONFIG_DMAR_DEFAULT_ON*/
 
-static int __initdata dmar_map_gfx = 1;
+static int dmar_map_gfx = 1;
 static int dmar_forcedac;
 static int intel_iommu_strict;
 
@@ -1874,14 +1874,15 @@ static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
 			}
 		}
 		if (found) {
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 			free_devinfo_mem(info);
 			domain_exit(domain);
 			domain = found;
 		} else {
 			list_add(&info->link, &domain->devices);
 			list_add(&info->global, &device_domain_list);
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 		}
-		spin_unlock_irqrestore(&device_domain_lock, flags);
 	}
 
 found_domain:
@@ -3603,7 +3604,8 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
 		pte = dmar_domain->pgd;
 		if (dma_pte_present(pte)) {
 			free_pgtable_page(dmar_domain->pgd);
-			dmar_domain->pgd = (struct dma_pte *)dma_pte_addr(pte);
+			dmar_domain->pgd = (struct dma_pte *)
+				phys_to_virt(dma_pte_addr(pte));
 		}
 		dmar_domain->agaw--;
 	}
@@ -3719,6 +3721,12 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
 	 */
 	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
 	rwbf_quirk = 1;
+
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
+	if (dev->revision == 0x07) {
+		printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
+		dmar_map_gfx = 0;
+	}
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 2e7a3bf1382..1ab98bbe58d 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -48,6 +48,7 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
 		pci_check_pme_status(pci_dev);
 		pm_runtime_resume(&pci_dev->dev);
+		pci_wakeup_event(pci_dev);
 		if (pci_dev->subordinate)
 			pci_pme_wakeup_bus(pci_dev->subordinate);
 	}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index afd2fbf7d79..c9957f68ac9 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1035,39 +1035,6 @@ error:
 	return retval;
 }
 
-static void pci_remove_slot_links(struct pci_dev *dev)
-{
-	char func[10];
-	struct pci_slot *slot;
-
-	sysfs_remove_link(&dev->dev.kobj, "slot");
-	list_for_each_entry(slot, &dev->bus->slots, list) {
-		if (slot->number != PCI_SLOT(dev->devfn))
-			continue;
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		sysfs_remove_link(&slot->kobj, func);
-	}
-}
-
-static int pci_create_slot_links(struct pci_dev *dev)
-{
-	int result = 0;
-	char func[10];
-	struct pci_slot *slot;
-
-	list_for_each_entry(slot, &dev->bus->slots, list) {
-		if (slot->number != PCI_SLOT(dev->devfn))
-			continue;
-		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
-		if (result)
-			goto out;
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
-	}
-out:
-	return result;
-}
-
 int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 {
 	int retval;
@@ -1130,8 +1097,6 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 	if (retval)
 		goto err_vga_file;
 
-	pci_create_slot_links(pdev);
-
 	return 0;
 
 err_vga_file:
@@ -1181,8 +1146,6 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
 	if (!sysfs_initialized)
 		return;
 
-	pci_remove_slot_links(pdev);
-
 	pci_remove_capabilities_sysfs(pdev);
 
 	if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 60f30e7f1c8..130ed1daf0f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1275,6 +1275,22 @@ bool pci_check_pme_status(struct pci_dev *dev)
 	return ret;
 }
 
+/*
+ * Time to wait before the system can be put into a sleep state after reporting
+ * a wakeup event signaled by a PCI device.
+ */
+#define PCI_WAKEUP_COOLDOWN	100
+
+/**
+ * pci_wakeup_event - Report a wakeup event related to a given PCI device.
+ * @dev: Device to report the wakeup event for.
+ */
+void pci_wakeup_event(struct pci_dev *dev)
+{
+	if (device_may_wakeup(&dev->dev))
+		pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN);
+}
+
 /**
  * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
  * @dev: Device to handle.
@@ -1285,8 +1301,10 @@ bool pci_check_pme_status(struct pci_dev *dev)
  */
 static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
 {
-	if (pci_check_pme_status(dev))
+	if (pci_check_pme_status(dev)) {
 		pm_request_resume(&dev->dev);
+		pci_wakeup_event(dev);
+	}
 	return 0;
 }
 
@@ -2292,6 +2310,7 @@ void pci_msi_off(struct pci_dev *dev)
 		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 	}
 }
+EXPORT_SYMBOL_GPL(pci_msi_off);
 
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f8077b3c8c8..c8b7fd056cc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -56,6 +56,7 @@ extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
 extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern bool pci_check_pme_status(struct pci_dev *dev);
 extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern void pci_wakeup_event(struct pci_dev *dev);
 extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
 extern void pci_pme_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index aac285a16b6..bbdea18693d 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -34,7 +34,7 @@
  * being registered.  Consequently, the interrupt-based PCIe PME signaling will
  * not be used by any PCIe root ports in that case.
  */
-static bool pcie_pme_disabled;
+static bool pcie_pme_disabled = true;
 
 /*
  * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
@@ -64,12 +64,19 @@ bool pcie_pme_msi_disabled;
 
 static int __init pcie_pme_setup(char *str)
 {
-	if (!strcmp(str, "off"))
-		pcie_pme_disabled = true;
-	else if (!strcmp(str, "force"))
+	if (!strncmp(str, "auto", 4))
+		pcie_pme_disabled = false;
+	else if (!strncmp(str, "force", 5))
 		pcie_pme_force_enable = true;
-	else if (!strcmp(str, "nomsi"))
-		pcie_pme_msi_disabled = true;
+
+	str = strchr(str, ',');
+	if (str) {
+		str++;
+		str += strspn(str, " \t");
+		if (*str && !strcmp(str, "nomsi"))
+			pcie_pme_msi_disabled = true;
+	}
+
 	return 1;
 }
 __setup("pcie_pme=", pcie_pme_setup);
@@ -147,6 +154,7 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus)
 		/* Skip PCIe devices in case we started from a root port. */
 		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
 			ret = true;
 		}
 
@@ -247,8 +255,10 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
 	if (found) {
 		/* The device is there, but we have to check its PME status. */
 		found = pci_check_pme_status(dev);
-		if (found)
+		if (found) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
+		}
 		pci_dev_put(dev);
 	} else if (devfn) {
 		/*
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b7512cf08c5..477345d4164 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1457,7 +1457,8 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 	conf5 &= ~(1 << 24);  /* Clear bit 24 */
 
 	switch (pdev->device) {
-	case PCI_DEVICE_ID_JMICRON_JMB360:
+	case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+	case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
 		/* The controller should be in single function ahci mode */
 		conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
 		break;
@@ -1493,12 +1494,14 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 17bed18d24a..2aaa13150de 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -97,16 +97,16 @@ int pci_claim_resource(struct pci_dev *dev, int resource)
 
 	root = pci_find_parent_resource(dev, res);
 	if (!root) {
-		dev_err(&dev->dev, "no compatible bridge window for %pR\n",
-			res);
+		dev_info(&dev->dev, "no compatible bridge window for %pR\n",
+			 res);
 		return -EINVAL;
 	}
 
 	conflict = request_resource_conflict(root, res);
 	if (conflict) {
-		dev_err(&dev->dev,
-			"address space collision: %pR conflicts with %s %pR\n",
-			res, conflict->name, conflict);
+		dev_info(&dev->dev,
+			 "address space collision: %pR conflicts with %s %pR\n",
+			 res, conflict->name, conflict);
 		return -EBUSY;
 	}
 
@@ -156,6 +156,38 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
 					     pcibios_align_resource, dev);
 	}
 
+	if (ret < 0 && dev->fw_addr[resno]) {
+		struct resource *root, *conflict;
+		resource_size_t start, end;
+
+		/*
+		 * If we failed to assign anything, let's try the address
+		 * where firmware left it.  That at least has a chance of
+		 * working, which is better than just leaving it disabled.
+		 */
+
+		if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			root = &iomem_resource;
+
+		start = res->start;
+		end = res->end;
+		res->start = dev->fw_addr[resno];
+		res->end = res->start + size - 1;
+		dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
+			 resno, res);
+		conflict = request_resource_conflict(root, res);
+		if (conflict) {
+			dev_info(&dev->dev,
+				 "BAR %d: %pR conflicts with %s %pR\n", resno,
+				 res, conflict->name, conflict);
+			res->start = start;
+			res->end = end;
+		} else
+			ret = 0;
+	}
+
 	if (!ret) {
 		res->flags &= ~IORESOURCE_STARTALIGN;
 		dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index e0189cf7c55..659eaa0fc48 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -97,50 +97,6 @@ static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
 	return bus_speed_read(slot->bus->cur_bus_speed, buf);
 }
 
-static void remove_sysfs_files(struct pci_slot *slot)
-{
-	char func[10];
-	struct list_head *tmp;
-
-	list_for_each(tmp, &slot->bus->devices) {
-		struct pci_dev *dev = pci_dev_b(tmp);
-		if (PCI_SLOT(dev->devfn) != slot->number)
-			continue;
-		sysfs_remove_link(&dev->dev.kobj, "slot");
-
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		sysfs_remove_link(&slot->kobj, func);
-	}
-}
-
-static int create_sysfs_files(struct pci_slot *slot)
-{
-	int result;
-	char func[10];
-	struct list_head *tmp;
-
-	list_for_each(tmp, &slot->bus->devices) {
-		struct pci_dev *dev = pci_dev_b(tmp);
-		if (PCI_SLOT(dev->devfn) != slot->number)
-			continue;
-
-		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
-		if (result)
-			goto fail;
-
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
-		if (result)
-			goto fail;
-	}
-
-	return 0;
-
-fail:
-	remove_sysfs_files(slot);
-	return result;
-}
-
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -153,8 +109,6 @@ static void pci_slot_release(struct kobject *kobj)
 		if (PCI_SLOT(dev->devfn) == slot->number)
 			dev->slot = NULL;
 
-	remove_sysfs_files(slot);
-
 	list_del(&slot->list);
 
 	kfree(slot);
@@ -346,8 +300,6 @@ placeholder:
 	INIT_LIST_HEAD(&slot->list);
 	list_add(&slot->list, &parent->slots);
 
-	create_sysfs_files(slot);
-
 	list_for_each_entry(dev, &parent->devices, bus_list)
 		if (PCI_SLOT(dev->devfn) == slot_nr)
 			dev->slot = slot;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7ef7adee5e4..eac961463be 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -671,6 +671,7 @@ static void pcmcia_requery(struct pcmcia_socket *s)
 		if (old_funcs != new_funcs) {
 			/* we need to re-start */
 			pcmcia_card_remove(s, NULL);
+			s->functions = 0;
 			pcmcia_card_add(s);
 		}
 	}
@@ -1355,6 +1356,7 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev,
 	INIT_LIST_HEAD(&socket->devices_list);
 	memset(&socket->pcmcia_state, 0, sizeof(u8));
 	socket->device_count = 0;
+	atomic_set(&socket->present, 0);
 
 	ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
 	if (ret) {
@@ -1363,8 +1365,6 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev,
 		return ret;
 	}
 
-	atomic_set(&socket->present, 0);
-
 	return 0;
 }
 
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 1a648b90b63..25e5e30a18a 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1157,7 +1157,7 @@ static int __init m8xx_probe(struct of_device *ofdev,
 	unsigned int i, m, hwirq;
 	pcmconf8xx_t *pcmcia;
 	int status;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 
 	pcmcia_info("%s\n", version);
 
@@ -1301,7 +1301,7 @@ static struct of_platform_driver m8xx_pcmcia_driver = {
 	.driver = {
 		.name = driver_name,
 		.owner = THIS_MODULE,
-		.match_table = m8xx_pcmcia_match,
+		.of_match_table = m8xx_pcmcia_match,
 	},
 	.probe = m8xx_probe,
 	.remove = m8xx_remove,
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 29f91fac1df..a4cd9adfcbc 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -857,8 +857,10 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev)
 {
 	pcmcia_release_configuration(p_dev);
 	pcmcia_release_io(p_dev, &p_dev->io);
-	if (p_dev->_irq)
+	if (p_dev->_irq) {
 		free_irq(p_dev->irq, p_dev->priv);
+		p_dev->_irq = 0;
+	}
 	if (p_dev->win)
 		pcmcia_release_window(p_dev, p_dev->win);
 }
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index df4532e91b1..f370476d541 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -178,7 +178,6 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 			       unsigned long val,
 			       struct cpufreq_freqs *freqs)
 {
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
 	switch (val) {
 	case CPUFREQ_PRECHANGE:
 		if (freqs->new > freqs->old) {
@@ -186,7 +185,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 			       "pre-updating\n",
 			       freqs->new / 1000, (freqs->new / 100) % 10,
 			       freqs->old / 1000, (freqs->old / 100) % 10);
-			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+			pxa2xx_pcmcia_set_timing(skt);
 		}
 		break;
 
@@ -196,7 +195,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 			       "post-updating\n",
 			       freqs->new / 1000, (freqs->new / 100) % 10,
 			       freqs->old / 1000, (freqs->old / 100) % 10);
-			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+			pxa2xx_pcmcia_set_timing(skt);
 		}
 		break;
 	}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 424e576f3ac..f1d41374eea 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -880,6 +880,12 @@ static struct cardbus_type cardbus_type[] = {
 		.restore_state	= ti_restore_state,
 		.sock_init	= ti_init,
 	},
+	[CARDBUS_TYPE_ENE]	= {
+		.override	= ene_override,
+		.save_state	= ti_save_state,
+		.restore_state	= ti_restore_state,
+		.sock_init	= ti_init,
+	},
 #endif
 #ifdef CONFIG_YENTA_RICOH
 	[CARDBUS_TYPE_RICOH]	= {
@@ -902,14 +908,6 @@ static struct cardbus_type cardbus_type[] = {
 		.restore_state	= o2micro_restore_state,
 	},
 #endif
-#ifdef CONFIG_YENTA_TI
-	[CARDBUS_TYPE_ENE]	= {
-		.override	= ene_override,
-		.save_state	= ti_save_state,
-		.restore_state	= ti_restore_state,
-		.sock_init	= ti_init,
-	},
-#endif
 };
 
 
@@ -975,7 +973,7 @@ static irqreturn_t yenta_probe_handler(int irq, void *dev_id)
 /* probes the PCI interrupt, use only on override functions */
 static int yenta_probe_cb_irq(struct yenta_socket *socket)
 {
-	u8 reg;
+	u8 reg = 0;
 
 	if (!socket->cb_irq)
 		return -1;
@@ -989,7 +987,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 	}
 
 	/* generate interrupt, wait */
-	reg = exca_readb(socket, I365_CSCINT);
+	if (!socket->dev->irq)
+		reg = exca_readb(socket, I365_CSCINT);
 	exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG);
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3e1b8a28871..79baa6368f7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -5,6 +5,7 @@
 menuconfig X86_PLATFORM_DEVICES
 	bool "X86 Platform Specific Device Drivers"
 	default y
+	depends on X86
 	---help---
 	  Say Y here to get to see options for device drivers for various
 	  x86 platforms, including vendor-specific laptop extension drivers.
@@ -151,6 +152,7 @@ config MSI_LAPTOP
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on SERIO_I8042
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
@@ -181,6 +183,8 @@ config COMPAL_LAPTOP
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on HWMON
+	depends on POWER_SUPPLY
 	---help---
 	  This is a driver for laptops built by Compal:
 
@@ -520,6 +524,7 @@ config TOSHIBA_BT_RFKILL
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
 	depends on X86 && ACPI
+	depends on RFKILL || RFKILL=n
 	select INPUT
 	select BACKLIGHT_CLASS_DEVICE
 	default n
@@ -537,4 +542,43 @@ config INTEL_SCU_IPC
 	  some embedded Intel x86 platforms. This is not needed for PC-type
 	  machines.
 
+config GPIO_INTEL_PMIC
+	bool "Intel PMIC GPIO support"
+	depends on INTEL_SCU_IPC && GPIOLIB
+	---help---
+	  Say Y here to support GPIO via the SCU IPC interface
+	  on Intel MID platforms.
+
+config RAR_REGISTER
+	bool "Restricted Access Region Register Driver"
+	depends on PCI && X86_MRST
+	default n
+	---help---
+	  This driver allows other kernel drivers access to the
+	  contents of the restricted access region control registers.
+
+	  The restricted access region control registers
+	  (rar_registers) are used to pass address and
+	  locking information on restricted access regions
+	  to other drivers that use restricted access regions.
+
+	  The restricted access regions are regions of memory
+	  on the Intel MID Platform that are not accessible to
+	  the x86 processor, but are accessible to dedicated
+	  processors on board peripheral devices.
+
+	  The purpose of the restricted access regions is to
+	  protect sensitive data from compromise by unauthorized
+	  programs running on the x86 processor.
+
+config INTEL_IPS
+	tristate "Intel Intelligent Power Sharing"
+	depends on ACPI
+	---help---
+	  Intel Calpella platforms support dynamic power sharing between the
+	  CPU and GPU, maximizing performance in a given TDP.  This driver,
+	  along with the CPU frequency and i915 drivers, provides that
+	  functionality.  If in doubt, say Y here; it will only load on
+	  supported platforms.
+
 endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 8770bfe7143..4744c7744ff 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -26,3 +26,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
 obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
+obj-$(CONFIG_RAR_REGISTER)	+= intel_rar_register.o
+obj-$(CONFIG_INTEL_IPS)		+= intel_ips.o
+obj-$(CONFIG_GPIO_INTEL_PMIC)	+= intel_pmic_gpio.o
+
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 1ea6c434d33..2badee2fdee 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -50,17 +50,6 @@ MODULE_LICENSE("GPL");
 #define ACER_INFO KERN_INFO ACER_LOGPREFIX
 
 /*
- * The following defines quirks to get some specific functions to work
- * which are known to not be supported over ACPI-WMI (such as the mail LED
- * on WMID based Acer's)
- */
-struct acer_quirks {
-	const char *vendor;
-	const char *model;
-	u16 quirks;
-};
-
-/*
  * Magic Number
  * Meaning is unknown - this number is required for writing to ACPI for AMW0
  * (it's also used in acerhk when directly accessing the BIOS)
@@ -200,7 +189,7 @@ static void set_quirks(void)
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
 	quirks = dmi->driver_data;
-	return 0;
+	return 1;
 }
 
 static struct quirk_entry quirk_unknown = {
@@ -555,6 +544,7 @@ static acpi_status AMW0_find_mailled(void)
 	obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
+		kfree(out.pointer);
 		return AE_ERROR;
 	}
 
@@ -570,7 +560,7 @@ static acpi_status AMW0_set_capabilities(void)
 {
 	struct wmab_args args;
 	struct wmab_ret ret;
-	acpi_status status = AE_OK;
+	acpi_status status;
 	struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
 
@@ -593,12 +583,13 @@ static acpi_status AMW0_set_capabilities(void)
 	if (ACPI_FAILURE(status))
 		return status;
 
-	obj = (union acpi_object *) out.pointer;
+	obj = out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
 	obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto out;
 	}
 
 	if (ret.eax & 0x1)
@@ -607,23 +598,26 @@ static acpi_status AMW0_set_capabilities(void)
 	args.ebx = 2 << 8;
 	args.ebx |= ACER_AMW0_BLUETOOTH_MASK;
 
+	/*
+	 * It's ok to use existing buffer for next wmab_execute call.
+	 * But we need to kfree(out.pointer) if next wmab_execute fail.
+	 */
 	status = wmab_execute(&args, &out);
 	if (ACPI_FAILURE(status))
-		return status;
+		goto out;
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER
 	&& obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto out;
 	}
 
 	if (ret.eax & 0x1)
 		interface->capability |= ACER_CAP_BLUETOOTH;
 
-	kfree(out.pointer);
-
 	/*
 	 * This appears to be safe to enable, since all Wistron based laptops
 	 * appear to use the same EC register for brightness, even if they
@@ -632,7 +626,10 @@ static acpi_status AMW0_set_capabilities(void)
 	if (quirks->brightness >= 0)
 		interface->capability |= ACER_CAP_BRIGHTNESS;
 
-	return AE_OK;
+	status = AE_OK;
+out:
+	kfree(out.pointer);
+	return status;
 }
 
 static struct wmi_interface AMW0_interface = {
@@ -772,6 +769,7 @@ static acpi_status WMID_set_capabilities(void)
 		obj->buffer.length == sizeof(u32)) {
 		devices = *((u32 *) obj->buffer.pointer);
 	} else {
+		kfree(out.pointer);
 		return AE_ERROR;
 	}
 
@@ -788,6 +786,7 @@ static acpi_status WMID_set_capabilities(void)
 	if (!(devices & 0x20))
 		max_brightness = 0x9;
 
+	kfree(out.pointer);
 	return status;
 }
 
@@ -1084,8 +1083,7 @@ static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
 	}
 }
 
-static DEVICE_ATTR(interface, S_IWUGO | S_IRUGO | S_IWUSR,
-	show_interface, NULL);
+static DEVICE_ATTR(interface, S_IRUGO, show_interface, NULL);
 
 /*
  * debugfs functions
@@ -1095,6 +1093,7 @@ static u32 get_wmid_devices(void)
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *obj;
 	acpi_status status;
+	u32 devices = 0;
 
 	status = wmi_query_block(WMID_GUID2, 1, &out);
 	if (ACPI_FAILURE(status))
@@ -1103,10 +1102,11 @@ static u32 get_wmid_devices(void)
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
 		obj->buffer.length == sizeof(u32)) {
-		return *((u32 *) obj->buffer.pointer);
-	} else {
-		return 0;
+		devices = *((u32 *) obj->buffer.pointer);
 	}
+
+	kfree(out.pointer);
+	return devices;
 }
 
 /*
@@ -1327,22 +1327,31 @@ static int __init acer_wmi_init(void)
 		       "generic video driver\n");
 	}
 
-	if (platform_driver_register(&acer_platform_driver)) {
+	err = platform_driver_register(&acer_platform_driver);
+	if (err) {
 		printk(ACER_ERR "Unable to register platform driver.\n");
 		goto error_platform_register;
 	}
+
 	acer_platform_device = platform_device_alloc("acer-wmi", -1);
-	platform_device_add(acer_platform_device);
+	if (!acer_platform_device) {
+		err = -ENOMEM;
+		goto error_device_alloc;
+	}
+
+	err = platform_device_add(acer_platform_device);
+	if (err)
+		goto error_device_add;
 
 	err = create_sysfs();
 	if (err)
-		return err;
+		goto error_create_sys;
 
 	if (wmi_has_guid(WMID_GUID2)) {
 		interface->debug.wmid_devices = get_wmid_devices();
 		err = create_debugfs();
 		if (err)
-			return err;
+			goto error_create_debugfs;
 	}
 
 	/* Override any initial settings with values from the commandline */
@@ -1350,15 +1359,23 @@ static int __init acer_wmi_init(void)
 
 	return 0;
 
+error_create_debugfs:
+	remove_sysfs(acer_platform_device);
+error_create_sys:
+	platform_device_del(acer_platform_device);
+error_device_add:
+	platform_device_put(acer_platform_device);
+error_device_alloc:
+	platform_driver_unregister(&acer_platform_driver);
 error_platform_register:
-	return -ENODEV;
+	return err;
 }
 
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
 	remove_debugfs();
-	platform_device_del(acer_platform_device);
+	platform_device_unregister(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
 	printk(ACER_INFO "Acer Laptop WMI Extras unloaded\n");
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 7b2384d674d..60f9cfcac93 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -52,7 +52,7 @@
  */
 #undef START_IN_KERNEL_MODE
 
-#define DRV_VER "0.5.22"
+#define DRV_VER "0.5.24"
 
 /*
  * According to the Atom N270 datasheet,
@@ -92,9 +92,9 @@ static unsigned int fanstate = ACERHDF_FAN_AUTO;
 static char force_bios[16];
 static char force_product[16];
 static unsigned int prev_interval;
-struct thermal_zone_device *thz_dev;
-struct thermal_cooling_device *cl_dev;
-struct platform_device *acerhdf_dev;
+static struct thermal_zone_device *thz_dev;
+static struct thermal_cooling_device *cl_dev;
+static struct platform_device *acerhdf_dev;
 
 module_param(kernelmode, uint, 0);
 MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
@@ -112,14 +112,12 @@ module_param_string(force_product, force_product, 16, 0);
 MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
 
 /*
- * cmd_off: to switch the fan completely off
- * chk_off: to check if the fan is off
+ * cmd_off: to switch the fan completely off and check if the fan is off
  *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
  *		the fan speed depending on the temperature
  */
 struct fancmd {
 	u8 cmd_off;
-	u8 chk_off;
 	u8 cmd_auto;
 };
 
@@ -136,47 +134,81 @@ struct bios_settings_t {
 /* Register addresses and values for different BIOS versions */
 static const struct bios_settings_t bios_tbl[] = {
 	/* AOA110 */
-	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
-	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
-	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
 	/* AOA150 */
-	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
 	/* Acer 1410 */
-	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
 	/* Acer 1810xx */
-	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
+	/* Acer 531 */
+	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} },
 	/* Gateway */
-	{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x10, 0x0f, 0x00} },
-	{"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x10, 0x0f, 0x00} },
-	{"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x10, 0x0f, 0x00} },
+	{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+	{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
+	{"Gateway", "LT31",   "v1.3103", 0x55, 0x58, {0x9e, 0x00} },
+	{"Gateway", "LT31",   "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
+	{"Gateway", "LT31",   "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
 	/* Packard Bell */
-	{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+	{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+	{"Packard Bell", "DOTMU",  "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMA",  "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMA",  "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
 	/* pewpew-terminator */
-	{"", "", "", 0, 0, {0, 0, 0} }
+	{"", "", "", 0, 0, {0, 0} }
 };
 
 static const struct bios_settings_t *bios_cfg __read_mostly;
@@ -200,7 +232,7 @@ static int acerhdf_get_fanstate(int *state)
 	if (ec_read(bios_cfg->fanreg, &fan))
 		return -EINVAL;
 
-	if (fan != bios_cfg->cmd.chk_off)
+	if (fan != bios_cfg->cmd.cmd_off)
 		*state = ACERHDF_FAN_AUTO;
 	else
 		*state = ACERHDF_FAN_OFF;
@@ -374,7 +406,7 @@ static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
 }
 
 /* bind callback functions to thermalzone */
-struct thermal_zone_device_ops acerhdf_dev_ops = {
+static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.bind = acerhdf_bind,
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
@@ -449,7 +481,7 @@ err_out:
 }
 
 /* bind fan callbacks to fan device */
-struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+static struct thermal_cooling_device_ops acerhdf_cooling_ops = {
 	.get_max_state = acerhdf_get_max_state,
 	.get_cur_state = acerhdf_get_cur_state,
 	.set_cur_state = acerhdf_set_cur_state,
@@ -518,6 +550,10 @@ static int acerhdf_check_hardware(void)
 	version = dmi_get_system_info(DMI_BIOS_VERSION);
 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
 
+	if (!vendor || !version || !product) {
+		pr_err("error getting hardware information\n");
+		return -EINVAL;
+	}
 
 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
 
@@ -579,17 +615,26 @@ static int acerhdf_register_platform(void)
 		return err;
 
 	acerhdf_dev = platform_device_alloc("acerhdf", -1);
-	platform_device_add(acerhdf_dev);
+	if (!acerhdf_dev) {
+		err = -ENOMEM;
+		goto err_device_alloc;
+	}
+	err = platform_device_add(acerhdf_dev);
+	if (err)
+		goto err_device_add;
 
 	return 0;
+
+err_device_add:
+	platform_device_put(acerhdf_dev);
+err_device_alloc:
+	platform_driver_unregister(&acerhdf_driver);
+	return err;
 }
 
 static void acerhdf_unregister_platform(void)
 {
-	if (!acerhdf_dev)
-		return;
-
-	platform_device_del(acerhdf_dev);
+	platform_device_unregister(acerhdf_dev);
 	platform_driver_unregister(&acerhdf_driver);
 }
 
@@ -633,7 +678,7 @@ static int __init acerhdf_init(void)
 
 	err = acerhdf_register_platform();
 	if (err)
-		goto err_unreg;
+		goto out_err;
 
 	err = acerhdf_register_thermal();
 	if (err)
@@ -646,7 +691,7 @@ err_unreg:
 	acerhdf_unregister_platform();
 
 out_err:
-	return -ENODEV;
+	return err;
 }
 
 static void __exit acerhdf_exit(void)
@@ -662,11 +707,13 @@ MODULE_DESCRIPTION("Aspire One temperature and fan driver");
 MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1410*:");
 MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1810*:");
+MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
 MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMU*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMA*:");
 
 module_init(acerhdf_init);
 module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index efe8f638890..b756e07d41b 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -76,18 +76,18 @@ MODULE_LICENSE("GPL");
  * So, if something doesn't work as you want, just try other values =)
  */
 static uint wapf = 1;
-module_param(wapf, uint, 0644);
+module_param(wapf, uint, 0444);
 MODULE_PARM_DESC(wapf, "WAPF value");
 
 static int wlan_status = 1;
 static int bluetooth_status = 1;
 
-module_param(wlan_status, int, 0644);
+module_param(wlan_status, int, 0444);
 MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
 
-module_param(bluetooth_status, int, 0644);
+module_param(bluetooth_status, int, 0444);
 MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
@@ -297,7 +297,7 @@ static int write_acpi_int_ret(acpi_handle handle, const char *method, int val,
 	acpi_status status;
 
 	if (!handle)
-		return 0;
+		return -1;
 
 	params.count = 1;
 	params.pointer = &in_obj;
@@ -796,10 +796,11 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
-		if (write_acpi_int(asus->handle, METHOD_LEDD, value))
+		if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
 			pr_warning("LED display write failed\n");
-		else
-			asus->ledd_status = (u32) value;
+			return -ENODEV;
+		}
+		asus->ledd_status = (u32) value;
 	}
 	return rv;
 }
@@ -1123,7 +1124,7 @@ static int asus_input_init(struct asus_laptop *asus)
 	input = input_allocate_device();
 	if (!input) {
 		pr_info("Unable to allocate input device\n");
-		return 0;
+		return -ENOMEM;
 	}
 	input->name = "Asus Laptop extra buttons";
 	input->phys = ASUS_LAPTOP_FILE "/input0";
@@ -1134,20 +1135,20 @@ static int asus_input_init(struct asus_laptop *asus)
 	error = sparse_keymap_setup(input, asus_keymap, NULL);
 	if (error) {
 		pr_err("Unable to setup input device keymap\n");
-		goto err_keymap;
+		goto err_free_dev;
 	}
 	error = input_register_device(input);
 	if (error) {
 		pr_info("Unable to register input device\n");
-		goto err_device;
+		goto err_free_keymap;
 	}
 
 	asus->inputdev = input;
 	return 0;
 
-err_keymap:
+err_free_keymap:
 	sparse_keymap_free(input);
-err_device:
+err_free_dev:
 	input_free_device(input);
 	return error;
 }
@@ -1397,8 +1398,10 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 		}
 	}
 	asus->name = kstrdup(string, GFP_KERNEL);
-	if (!asus->name)
+	if (!asus->name) {
+		kfree(buffer.pointer);
 		return -ENOMEM;
+	}
 
 	if (*string)
 		pr_notice("  %s model detected\n", string);
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 92fd30c9379..e058c2ba2a1 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1330,6 +1330,9 @@ static int asus_hotk_get_info(void)
 			hotk->model = P30;
 			printk(KERN_NOTICE
 			       "  Samsung P30 detected, supported\n");
+			hotk->methods = &model_conf[hotk->model];
+			kfree(model);
+			return 0;
 		} else {
 			hotk->model = M2E;
 			printk(KERN_NOTICE "  unsupported model %s, trying "
@@ -1339,8 +1342,6 @@ static int asus_hotk_get_info(void)
 			kfree(model);
 			return -ENODEV;
 		}
-		hotk->methods = &model_conf[hotk->model];
-		return AE_OK;
 	}
 	hotk->methods = &model_conf[hotk->model];
 	printk(KERN_NOTICE "  %s model detected, supported\n", string);
@@ -1374,7 +1375,7 @@ static int asus_hotk_get_info(void)
 
 	kfree(model);
 
-	return AE_OK;
+	return 0;
 }
 
 static int asus_hotk_check(void)
diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c
index 3bf399fe2bb..341cbfef93e 100644
--- a/drivers/platform/x86/classmate-laptop.c
+++ b/drivers/platform/x86/classmate-laptop.c
@@ -208,7 +208,7 @@ static ssize_t cmpc_accel_sensitivity_store(struct device *dev,
 	return strnlen(buf, count);
 }
 
-struct device_attribute cmpc_accel_sensitivity_attr = {
+static struct device_attribute cmpc_accel_sensitivity_attr = {
 	.attr = { .name = "sensitivity", .mode = 0660 },
 	.show = cmpc_accel_sensitivity_show,
 	.store = cmpc_accel_sensitivity_store
@@ -573,16 +573,17 @@ static int cmpc_ipml_add(struct acpi_device *acpi)
 
 	ipml->rf = rfkill_alloc("cmpc_rfkill", &acpi->dev, RFKILL_TYPE_WLAN,
 				&cmpc_rfkill_ops, acpi->handle);
-	/* rfkill_alloc may fail if RFKILL is disabled. We should still work
-	 * anyway. */
-	if (!IS_ERR(ipml->rf)) {
+	/*
+	 * If RFKILL is disabled, rfkill_alloc will return ERR_PTR(-ENODEV).
+	 * This is OK, however, since all other uses of the device will not
+	 * derefence it.
+	 */
+	if (ipml->rf) {
 		retval = rfkill_register(ipml->rf);
 		if (retval) {
 			rfkill_destroy(ipml->rf);
 			ipml->rf = NULL;
 		}
-	} else {
-		ipml->rf = NULL;
 	}
 
 	dev_set_drvdata(&acpi->dev, ipml);
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 71ff1545a93..d071ce05632 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -24,17 +24,50 @@
  */
 
 /*
- * comapl-laptop.c - Compal laptop support.
+ * compal-laptop.c - Compal laptop support.
+ *
+ * This driver exports a few files in /sys/devices/platform/compal-laptop/:
+ *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
+ *
+ * In addition to these platform device attributes the driver
+ * registers itself in the Linux backlight control, power_supply, rfkill
+ * and hwmon subsystem and is available to userspace under:
+ *
+ *   /sys/class/backlight/compal-laptop/
+ *   /sys/class/power_supply/compal-laptop/
+ *   /sys/class/rfkill/rfkillX/
+ *   /sys/class/hwmon/hwmonX/
+ *
+ * Notes on the power_supply battery interface:
+ *   - the "minimum" design voltage is *the* design voltage
+ *   - the ambient temperature is the average battery temperature
+ *     and the value is an educated guess (see commented code below)
  *
- * The driver registers itself with the rfkill subsystem and
- * the Linux backlight control subsystem.
  *
  * This driver might work on other laptops produced by Compal. If you
  * want to try it you can pass force=1 as argument to the module which
  * will force it to load even when the DMI data doesn't identify the
- * laptop as FL9x.
+ * laptop as compatible.
+ *
+ * Lots of data available at:
+ * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
+ * JHL90%20service%20manual-Final-0725.pdf
+ *
+ *
+ *
+ * Support for the Compal JHL90 added by Roald Frederickx
+ * (roald.frederickx@gmail.com):
+ * Driver got large revision. Added functionalities: backlight
+ * power, wake_on_XXX, a hwmon and power_supply interface.
+ *
+ * In case this gets merged into the kernel source: I want to dedicate this
+ * to Kasper Meerts, the awesome guy who showed me Linux and C!
  */
 
+/* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
+ * only enabled on a JHL90 board until it is verified that they work on the
+ * other boards too.  See the extra_features variable. */
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -43,71 +76,296 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/power_supply.h>
+#include <linux/fb.h>
+
+
+/* ======= */
+/* Defines */
+/* ======= */
+#define DRIVER_NAME "compal-laptop"
+#define DRIVER_VERSION	"0.2.7"
+
+#define BACKLIGHT_LEVEL_ADDR		0xB9
+#define BACKLIGHT_LEVEL_MAX		7
+#define BACKLIGHT_STATE_ADDR		0x59
+#define BACKLIGHT_STATE_ON_DATA		0xE1
+#define BACKLIGHT_STATE_OFF_DATA	0xE2
+
+#define WAKE_UP_ADDR			0xA4
+#define WAKE_UP_PME			(1 << 0)
+#define WAKE_UP_MODEM			(1 << 1)
+#define WAKE_UP_LAN			(1 << 2)
+#define WAKE_UP_WLAN			(1 << 4)
+#define WAKE_UP_KEY			(1 << 6)
+#define WAKE_UP_MOUSE			(1 << 7)
+
+#define WIRELESS_ADDR			0xBB
+#define WIRELESS_WLAN			(1 << 0)
+#define WIRELESS_BT			(1 << 1)
+#define WIRELESS_WLAN_EXISTS		(1 << 2)
+#define WIRELESS_BT_EXISTS		(1 << 3)
+#define WIRELESS_KILLSWITCH		(1 << 4)
+
+#define PWM_ADDRESS			0x46
+#define PWM_DISABLE_ADDR		0x59
+#define PWM_DISABLE_DATA		0xA5
+#define PWM_ENABLE_ADDR			0x59
+#define PWM_ENABLE_DATA			0xA8
+
+#define FAN_ADDRESS			0x46
+#define FAN_DATA			0x81
+#define FAN_FULL_ON_CMD			0x59 /* Doesn't seem to work. Just */
+#define FAN_FULL_ON_ENABLE		0x76 /* force the pwm signal to its */
+#define FAN_FULL_ON_DISABLE		0x77 /* maximum value instead */
+
+#define TEMP_CPU			0xB0
+#define TEMP_CPU_LOCAL			0xB1
+#define TEMP_CPU_DTS			0xB5
+#define TEMP_NORTHBRIDGE		0xB6
+#define TEMP_VGA			0xB4
+#define TEMP_SKIN			0xB2
+
+#define BAT_MANUFACTURER_NAME_ADDR	0x10
+#define BAT_MANUFACTURER_NAME_LEN	9
+#define BAT_MODEL_NAME_ADDR		0x19
+#define BAT_MODEL_NAME_LEN		6
+#define BAT_SERIAL_NUMBER_ADDR		0xC4
+#define BAT_SERIAL_NUMBER_LEN		5
+#define BAT_CHARGE_NOW			0xC2
+#define BAT_CHARGE_DESIGN		0xCA
+#define BAT_VOLTAGE_NOW			0xC6
+#define BAT_VOLTAGE_DESIGN		0xC8
+#define BAT_CURRENT_NOW			0xD0
+#define BAT_CURRENT_AVG			0xD2
+#define BAT_POWER			0xD4
+#define BAT_CAPACITY			0xCE
+#define BAT_TEMP			0xD6
+#define BAT_TEMP_AVG			0xD7
+#define BAT_STATUS0			0xC1
+#define BAT_STATUS1			0xF0
+#define BAT_STATUS2			0xF1
+#define BAT_STOP_CHARGE1		0xF2
+#define BAT_STOP_CHARGE2		0xF3
+
+#define BAT_S0_DISCHARGE		(1 << 0)
+#define BAT_S0_DISCHRG_CRITICAL		(1 << 2)
+#define BAT_S0_LOW			(1 << 3)
+#define BAT_S0_CHARGING			(1 << 1)
+#define BAT_S0_AC			(1 << 7)
+#define BAT_S1_EXISTS			(1 << 0)
+#define BAT_S1_FULL			(1 << 1)
+#define BAT_S1_EMPTY			(1 << 2)
+#define BAT_S1_LiION_OR_NiMH		(1 << 7)
+#define BAT_S2_LOW_LOW			(1 << 0)
+#define BAT_STOP_CHRG1_BAD_CELL		(1 << 1)
+#define BAT_STOP_CHRG1_COMM_FAIL	(1 << 2)
+#define BAT_STOP_CHRG1_OVERVOLTAGE	(1 << 6)
+#define BAT_STOP_CHRG1_OVERTEMPERATURE	(1 << 7)
+
+
+/* ======= */
+/* Structs */
+/* ======= */
+struct compal_data{
+	/* Fan control */
+	struct device *hwmon_dev;
+	int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by moterboard */
+	unsigned char curr_pwm;
+
+	/* Power supply */
+	struct power_supply psy;
+	struct power_supply_info psy_info;
+	char bat_model_name[BAT_MODEL_NAME_LEN + 1];
+	char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
+	char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
+};
 
-#define COMPAL_DRIVER_VERSION "0.2.6"
 
-#define COMPAL_LCD_LEVEL_MAX 8
+/* =============== */
+/* General globals */
+/* =============== */
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 
-#define COMPAL_EC_COMMAND_WIRELESS 0xBB
-#define COMPAL_EC_COMMAND_LCD_LEVEL 0xB9
+/* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
+ * only gets enabled on a JHL90 board. Might work with the others too */
+static bool extra_features;
+
+/* Nasty stuff. For some reason the fan control is very un-linear.  I've
+ * come up with these values by looping through the possible inputs and
+ * watching the output of address 0x4F (do an ec_transaction writing 0x33
+ * into 0x4F and read a few bytes from the output, like so:
+ *	u8 writeData = 0x33;
+ *	ec_transaction(0x4F, &writeData, 1, buffer, 32, 0);
+ * That address is labled "fan1 table information" in the service manual.
+ * It should be clear which value in 'buffer' changes). This seems to be
+ * related to fan speed. It isn't a proper 'realtime' fan speed value
+ * though, because physically stopping or speeding up the fan doesn't
+ * change it. It might be the average voltage or current of the pwm output.
+ * Nevertheless, it is more fine-grained than the actual RPM reading */
+static const unsigned char pwm_lookup_table[256] = {
+	0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
+	7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
+	13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
+	75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
+	94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
+	139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
+	76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
+	22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
+	219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
+	186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
+	33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
+	206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
+	47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
+	48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
+	189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
+	191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
+	187, 187, 193, 50
+};
 
-#define KILLSWITCH_MASK 0x10
-#define WLAN_MASK	0x01
-#define BT_MASK 	0x02
 
-static struct rfkill *wifi_rfkill;
-static struct rfkill *bt_rfkill;
-static struct platform_device *compal_device;
 
-static int force;
-module_param(force, bool, 0);
-MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 
-/* Hardware access */
+/* ========================= */
+/* Hardware access functions */
+/* ========================= */
+/* General access */
+static u8 ec_read_u8(u8 addr)
+{
+	u8 value;
+	ec_read(addr, &value);
+	return value;
+}
+
+static s8 ec_read_s8(u8 addr)
+{
+	return (s8)ec_read_u8(addr);
+}
+
+static u16 ec_read_u16(u8 addr)
+{
+	int hi, lo;
+	lo = ec_read_u8(addr);
+	hi = ec_read_u8(addr + 1);
+	return (hi << 8) + lo;
+}
+
+static s16 ec_read_s16(u8 addr)
+{
+	return (s16) ec_read_u16(addr);
+}
 
-static int set_lcd_level(int level)
+static void ec_read_sequence(u8 addr, u8 *buf, int len)
 {
-	if (level < 0 || level >= COMPAL_LCD_LEVEL_MAX)
+	int i;
+	for (i = 0; i < len; i++)
+		ec_read(addr + i, buf + i);
+}
+
+
+/* Backlight access */
+static int set_backlight_level(int level)
+{
+	if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 		return -EINVAL;
 
-	ec_write(COMPAL_EC_COMMAND_LCD_LEVEL, level);
+	ec_write(BACKLIGHT_LEVEL_ADDR, level);
 
-	return 0;
+	return 1;
+}
+
+static int get_backlight_level(void)
+{
+	return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 }
 
-static int get_lcd_level(void)
+static void set_backlight_state(bool on)
 {
-	u8 result;
+	u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
+	ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0, 0);
+}
+
+
+/* Fan control access */
+static void pwm_enable_control(void)
+{
+	unsigned char writeData = PWM_ENABLE_DATA;
+	ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0, 0);
+}
+
+static void pwm_disable_control(void)
+{
+	unsigned char writeData = PWM_DISABLE_DATA;
+	ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0, 0);
+}
 
-	ec_read(COMPAL_EC_COMMAND_LCD_LEVEL, &result);
+static void set_pwm(int pwm)
+{
+	ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0, 0);
+}
+
+static int get_fan_rpm(void)
+{
+	u8 value, data = FAN_DATA;
+	ec_transaction(FAN_ADDRESS, &data, 1, &value, 1, 0);
+	return 100 * (int)value;
+}
+
+
+
+
+/* =================== */
+/* Interface functions */
+/* =================== */
+
+/* Backlight interface */
+static int bl_get_brightness(struct backlight_device *b)
+{
+	return get_backlight_level();
+}
+
+static int bl_update_status(struct backlight_device *b)
+{
+	int ret = set_backlight_level(b->props.brightness);
+	if (ret)
+		return ret;
 
-	return (int) result;
+	set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
+		&&    !(b->props.state & BL_CORE_SUSPENDED)
+		&&    !(b->props.state & BL_CORE_FBBLANK));
+	return 0;
 }
 
+static const struct backlight_ops compalbl_ops = {
+	.get_brightness = bl_get_brightness,
+	.update_status	= bl_update_status,
+};
+
+
+/* Wireless interface */
 static int compal_rfkill_set(void *data, bool blocked)
 {
 	unsigned long radio = (unsigned long) data;
-	u8 result, value;
-
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
+	u8 result = ec_read_u8(WIRELESS_ADDR);
+	u8 value;
 
 	if (!blocked)
 		value = (u8) (result | radio);
 	else
 		value = (u8) (result & ~radio);
-	ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
+	ec_write(WIRELESS_ADDR, value);
 
 	return 0;
 }
 
 static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 {
-	u8 result;
-	bool hw_blocked;
-
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
-
-	hw_blocked = !(result & KILLSWITCH_MASK);
+	u8 result = ec_read_u8(WIRELESS_ADDR);
+	bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 	rfkill_set_hw_state(rfkill, hw_blocked);
 }
 
@@ -116,80 +374,404 @@ static const struct rfkill_ops compal_rfkill_ops = {
 	.set_block = compal_rfkill_set,
 };
 
-static int setup_rfkill(void)
+
+/* Wake_up interface */
+#define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)			\
+static ssize_t NAME##_show(struct device *dev,				\
+	struct device_attribute *attr, char *buf)			\
+{									\
+	return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));	\
+}									\
+static ssize_t NAME##_store(struct device *dev,				\
+	struct device_attribute *attr, const char *buf, size_t count)	\
+{									\
+	int state;							\
+	u8 old_val = ec_read_u8(ADDR);					\
+	if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1))	\
+		return -EINVAL;						\
+	ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));	\
+	return count;							\
+}
+
+SIMPLE_MASKED_STORE_SHOW(wake_up_pme,	WAKE_UP_ADDR, WAKE_UP_PME)
+SIMPLE_MASKED_STORE_SHOW(wake_up_modem,	WAKE_UP_ADDR, WAKE_UP_MODEM)
+SIMPLE_MASKED_STORE_SHOW(wake_up_lan,	WAKE_UP_ADDR, WAKE_UP_LAN)
+SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,	WAKE_UP_ADDR, WAKE_UP_WLAN)
+SIMPLE_MASKED_STORE_SHOW(wake_up_key,	WAKE_UP_ADDR, WAKE_UP_KEY)
+SIMPLE_MASKED_STORE_SHOW(wake_up_mouse,	WAKE_UP_ADDR, WAKE_UP_MOUSE)
+
+
+/* General hwmon interface */
+static ssize_t hwmon_name_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
-	int ret;
+	return sprintf(buf, "%s\n", DRIVER_NAME);
+}
 
-	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
-				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
-				(void *) WLAN_MASK);
-	if (!wifi_rfkill)
-		return -ENOMEM;
 
-	ret = rfkill_register(wifi_rfkill);
-	if (ret)
-		goto err_wifi;
+/* Fan control interface */
+static ssize_t pwm_enable_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable);
+}
 
-	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
-				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
-				(void *) BT_MASK);
-	if (!bt_rfkill) {
-		ret = -ENOMEM;
-		goto err_allocate_bt;
+static ssize_t pwm_enable_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+	if (val < 0)
+		return -EINVAL;
+
+	data->pwm_enable = val;
+
+	switch (val) {
+	case 0:  /* Full speed */
+		pwm_enable_control();
+		set_pwm(255);
+		break;
+	case 1:  /* As set by pwm1 */
+		pwm_enable_control();
+		set_pwm(data->curr_pwm);
+		break;
+	default: /* Control by motherboard */
+		pwm_disable_control();
+		break;
 	}
-	ret = rfkill_register(bt_rfkill);
-	if (ret)
-		goto err_register_bt;
 
-	return 0;
+	return count;
+}
 
-err_register_bt:
-	rfkill_destroy(bt_rfkill);
+static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%hhu\n", data->curr_pwm);
+}
 
-err_allocate_bt:
-	rfkill_unregister(wifi_rfkill);
+static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+	if (val < 0 || val > 255)
+		return -EINVAL;
 
-err_wifi:
-	rfkill_destroy(wifi_rfkill);
+	data->curr_pwm = val;
 
-	return ret;
+	if (data->pwm_enable != 1)
+		return count;
+	set_pwm(val);
+
+	return count;
 }
 
-/* Backlight device stuff */
+static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	return sprintf(buf, "%d\n", get_fan_rpm());
+}
 
-static int bl_get_brightness(struct backlight_device *b)
+
+/* Temperature interface */
+#define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)	\
+static ssize_t temp_##POSTFIX(struct device *dev,			\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));	\
+}									\
+static ssize_t label_##POSTFIX(struct device *dev,			\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%s\n", LABEL);				\
+}
+
+/* Labels as in service guide */
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
+
+
+/* Power supply interface */
+static int bat_status(void)
+{
+	u8 status0 = ec_read_u8(BAT_STATUS0);
+	u8 status1 = ec_read_u8(BAT_STATUS1);
+
+	if (status0 & BAT_S0_CHARGING)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	if (status0 & BAT_S0_DISCHARGE)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+	if (status1 & BAT_S1_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+	return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int bat_health(void)
 {
-	return get_lcd_level();
+	u8 status = ec_read_u8(BAT_STOP_CHARGE1);
+
+	if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
+		return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	if (status & BAT_STOP_CHRG1_BAD_CELL)
+		return POWER_SUPPLY_HEALTH_DEAD;
+	if (status & BAT_STOP_CHRG1_COMM_FAIL)
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+	return POWER_SUPPLY_HEALTH_GOOD;
 }
 
+static int bat_is_present(void)
+{
+	u8 status = ec_read_u8(BAT_STATUS2);
+	return ((status & BAT_S1_EXISTS) != 0);
+}
 
-static int bl_update_status(struct backlight_device *b)
+static int bat_technology(void)
 {
-	return set_lcd_level(b->props.brightness);
+	u8 status = ec_read_u8(BAT_STATUS1);
+
+	if (status & BAT_S1_LiION_OR_NiMH)
+		return POWER_SUPPLY_TECHNOLOGY_LION;
+	return POWER_SUPPLY_TECHNOLOGY_NiMH;
 }
 
-static struct backlight_ops compalbl_ops = {
-	.get_brightness = bl_get_brightness,
-	.update_status	= bl_update_status,
-};
+static int bat_capacity_level(void)
+{
+	u8 status0 = ec_read_u8(BAT_STATUS0);
+	u8 status1 = ec_read_u8(BAT_STATUS1);
+	u8 status2 = ec_read_u8(BAT_STATUS2);
+
+	if (status0 & BAT_S0_DISCHRG_CRITICAL
+			|| status1 & BAT_S1_EMPTY
+			|| status2 & BAT_S2_LOW_LOW)
+		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+	if (status0 & BAT_S0_LOW)
+		return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+	if (status1 & BAT_S1_FULL)
+		return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+	return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+}
+
+static int bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct compal_data *data;
+	data = container_of(psy, struct compal_data, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat_status();
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = bat_health();
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat_is_present();
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat_technology();
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
+		val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		val->intval = ec_read_u8(BAT_POWER) * 1000000;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = ec_read_u8(BAT_CAPACITY);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		val->intval = bat_capacity_level();
+		break;
+	/* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
+	 * the number of degrees, whereas BAT_TEMP is somewhat more
+	 * complicated. It looks like this is a negative nember with a
+	 * 100/256 divider and an offset of 222. Both were determined
+	 * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
+		val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
+		break;
+	/* Neither the model name nor manufacturer name work for me. */
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = data->bat_model_name;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = data->bat_manufacturer_name;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		val->strval = data->bat_serial_number;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
 
-static struct backlight_device *compalbl_device;
 
 
+
+
+/* ============== */
+/* Driver Globals */
+/* ============== */
+static DEVICE_ATTR(wake_up_pme,
+		0644, wake_up_pme_show,		wake_up_pme_store);
+static DEVICE_ATTR(wake_up_modem,
+		0644, wake_up_modem_show,	wake_up_modem_store);
+static DEVICE_ATTR(wake_up_lan,
+		0644, wake_up_lan_show,	wake_up_lan_store);
+static DEVICE_ATTR(wake_up_wlan,
+		0644, wake_up_wlan_show,	wake_up_wlan_store);
+static DEVICE_ATTR(wake_up_key,
+		0644, wake_up_key_show,	wake_up_key_store);
+static DEVICE_ATTR(wake_up_mouse,
+		0644, wake_up_mouse_show,	wake_up_mouse_store);
+
+static SENSOR_DEVICE_ATTR(name,        S_IRUGO, hwmon_name_show,   NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store, 1);
+static SENSOR_DEVICE_ATTR(pwm1_enable,
+		S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store, 0);
+
+static struct attribute *compal_attributes[] = {
+	&dev_attr_wake_up_pme.attr,
+	&dev_attr_wake_up_modem.attr,
+	&dev_attr_wake_up_lan.attr,
+	&dev_attr_wake_up_wlan.attr,
+	&dev_attr_wake_up_key.attr,
+	&dev_attr_wake_up_mouse.attr,
+	/* Maybe put the sensor-stuff in a separate hwmon-driver? That way,
+	 * the hwmon sysfs won't be cluttered with the above files. */
+	&sensor_dev_attr_name.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+	&sensor_dev_attr_temp6_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
+	&sensor_dev_attr_temp3_label.dev_attr.attr,
+	&sensor_dev_attr_temp4_label.dev_attr.attr,
+	&sensor_dev_attr_temp5_label.dev_attr.attr,
+	&sensor_dev_attr_temp6_label.dev_attr.attr,
+	NULL
+};
+
+static struct attribute_group compal_attribute_group = {
+	.attrs = compal_attributes
+};
+
+static int __devinit compal_probe(struct platform_device *);
+static int __devexit compal_remove(struct platform_device *);
 static struct platform_driver compal_driver = {
 	.driver = {
-		.name = "compal-laptop",
+		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
-	}
+	},
+	.probe	= compal_probe,
+	.remove	= __devexit_p(compal_remove)
 };
 
-/* Initialization */
+static enum power_supply_property compal_bat_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_POWER_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static struct backlight_device *compalbl_device;
+
+static struct platform_device *compal_device;
+
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bt_rfkill;
+
+
+
+
+
+/* =================================== */
+/* Initialization & clean-up functions */
+/* =================================== */
 
 static int dmi_check_cb(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO "compal-laptop: Identified laptop model '%s'.\n",
+	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s'\n",
 		id->ident);
+	extra_features = false;
+	return 0;
+}
 
+static int dmi_check_cb_extra(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s', "
+		"enabling extra features\n",
+		id->ident);
+	extra_features = true;
 	return 0;
 }
 
@@ -274,27 +856,106 @@ static struct dmi_system_id __initdata compal_dmi_table[] = {
 		},
 		.callback = dmi_check_cb
 	},
-
+	{
+		.ident = "JHL90",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
+			DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
+		},
+		.callback = dmi_check_cb_extra
+	},
 	{ }
 };
 
+static void initialize_power_supply_data(struct compal_data *data)
+{
+	data->psy.name = DRIVER_NAME;
+	data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+	data->psy.properties = compal_bat_properties;
+	data->psy.num_properties = ARRAY_SIZE(compal_bat_properties);
+	data->psy.get_property = bat_get_property;
+
+	ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
+					data->bat_manufacturer_name,
+					BAT_MANUFACTURER_NAME_LEN);
+	data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
+
+	ec_read_sequence(BAT_MODEL_NAME_ADDR,
+					data->bat_model_name,
+					BAT_MODEL_NAME_LEN);
+	data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
+
+	scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
+				ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
+}
+
+static void initialize_fan_control_data(struct compal_data *data)
+{
+	data->pwm_enable = 2; /* Keep motherboard in control for now */
+	data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
+				 if we take over... */
+}
+
+static int setup_rfkill(void)
+{
+	int ret;
+
+	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
+				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
+				(void *) WIRELESS_WLAN);
+	if (!wifi_rfkill)
+		return -ENOMEM;
+
+	ret = rfkill_register(wifi_rfkill);
+	if (ret)
+		goto err_wifi;
+
+	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
+				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
+				(void *) WIRELESS_BT);
+	if (!bt_rfkill) {
+		ret = -ENOMEM;
+		goto err_allocate_bt;
+	}
+	ret = rfkill_register(bt_rfkill);
+	if (ret)
+		goto err_register_bt;
+
+	return 0;
+
+err_register_bt:
+	rfkill_destroy(bt_rfkill);
+
+err_allocate_bt:
+	rfkill_unregister(wifi_rfkill);
+
+err_wifi:
+	rfkill_destroy(wifi_rfkill);
+
+	return ret;
+}
+
 static int __init compal_init(void)
 {
 	int ret;
 
-	if (acpi_disabled)
+	if (acpi_disabled) {
+		printk(KERN_ERR DRIVER_NAME": ACPI needs to be enabled for "
+						"this driver to work!\n");
 		return -ENODEV;
+	}
 
-	if (!force && !dmi_check_system(compal_dmi_table))
+	if (!force && !dmi_check_system(compal_dmi_table)) {
+		printk(KERN_ERR DRIVER_NAME": Motherboard not recognized (You "
+				"could try the module's force-parameter)");
 		return -ENODEV;
-
-	/* Register backlight stuff */
+	}
 
 	if (!acpi_video_backlight_support()) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
-		props.max_brightness = COMPAL_LCD_LEVEL_MAX - 1;
-		compalbl_device = backlight_device_register("compal-laptop",
+		props.max_brightness = BACKLIGHT_LEVEL_MAX;
+		compalbl_device = backlight_device_register(DRIVER_NAME,
 							    NULL, NULL,
 							    &compalbl_ops,
 							    &props);
@@ -304,67 +965,122 @@ static int __init compal_init(void)
 
 	ret = platform_driver_register(&compal_driver);
 	if (ret)
-		goto fail_backlight;
+		goto err_backlight;
 
-	/* Register platform stuff */
-
-	compal_device = platform_device_alloc("compal-laptop", -1);
+	compal_device = platform_device_alloc(DRIVER_NAME, -1);
 	if (!compal_device) {
 		ret = -ENOMEM;
-		goto fail_platform_driver;
+		goto err_platform_driver;
 	}
 
-	ret = platform_device_add(compal_device);
+	ret = platform_device_add(compal_device); /* This calls compal_probe */
 	if (ret)
-		goto fail_platform_device;
+		goto err_platform_device;
 
 	ret = setup_rfkill();
 	if (ret)
-		goto fail_rfkill;
-
-	printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION
-		" successfully loaded.\n");
+		goto err_rfkill;
 
+	printk(KERN_INFO DRIVER_NAME": Driver "DRIVER_VERSION
+						" successfully loaded\n");
 	return 0;
 
-fail_rfkill:
+err_rfkill:
 	platform_device_del(compal_device);
 
-fail_platform_device:
-
+err_platform_device:
 	platform_device_put(compal_device);
 
-fail_platform_driver:
-
+err_platform_driver:
 	platform_driver_unregister(&compal_driver);
 
-fail_backlight:
-
+err_backlight:
 	backlight_device_unregister(compalbl_device);
 
 	return ret;
 }
 
-static void __exit compal_cleanup(void)
+static int __devinit compal_probe(struct platform_device *pdev)
 {
+	int err;
+	struct compal_data *data;
+
+	if (!extra_features)
+		return 0;
+
+	/* Fan control */
+	data = kzalloc(sizeof(struct compal_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	initialize_fan_control_data(data);
+
+	err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group);
+	if (err)
+		return err;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		sysfs_remove_group(&pdev->dev.kobj,
+				&compal_attribute_group);
+		kfree(data);
+		return err;
+	}
+
+	/* Power supply */
+	initialize_power_supply_data(data);
+	power_supply_register(&compal_device->dev, &data->psy);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
 
+static void __exit compal_cleanup(void)
+{
 	platform_device_unregister(compal_device);
 	platform_driver_unregister(&compal_driver);
 	backlight_device_unregister(compalbl_device);
 	rfkill_unregister(wifi_rfkill);
-	rfkill_destroy(wifi_rfkill);
 	rfkill_unregister(bt_rfkill);
+	rfkill_destroy(wifi_rfkill);
 	rfkill_destroy(bt_rfkill);
 
-	printk(KERN_INFO "compal-laptop: driver unloaded.\n");
+	printk(KERN_INFO DRIVER_NAME": Driver unloaded\n");
 }
 
+static int __devexit compal_remove(struct platform_device *pdev)
+{
+	struct compal_data *data;
+
+	if (!extra_features)
+		return 0;
+
+	printk(KERN_INFO DRIVER_NAME": Unloading: resetting fan control "
+							"to motherboard\n");
+	pwm_disable_control();
+
+	data = platform_get_drvdata(pdev);
+	hwmon_device_unregister(data->hwmon_dev);
+	power_supply_unregister(&data->psy);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+
+	sysfs_remove_group(&pdev->dev.kobj, &compal_attribute_group);
+
+	return 0;
+}
+
+
 module_init(compal_init);
 module_exit(compal_cleanup);
 
 MODULE_AUTHOR("Cezary Jackiewicz");
+MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
 MODULE_DESCRIPTION("Compal Laptop Support");
-MODULE_VERSION(COMPAL_DRIVER_VERSION);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 MODULE_ALIAS("dmi:*:rnIFL90:rvrIFT00:*");
@@ -372,6 +1088,7 @@ MODULE_ALIAS("dmi:*:rnIFL90:rvrREFERENCE:*");
 MODULE_ALIAS("dmi:*:rnIFL91:rvrIFT00:*");
 MODULE_ALIAS("dmi:*:rnJFL92:rvrIFT00:*");
 MODULE_ALIAS("dmi:*:rnIFT00:rvrIFT00:*");
+MODULE_ALIAS("dmi:*:rnJHL90:rvrREFERENCE:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*");
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 661e3ac4d5b..b41ed5cab3e 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -83,6 +83,12 @@ static const struct dmi_system_id __initdata dell_device_table[] = {
 		},
 	},
 	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /*Laptop*/
+		},
+	},
+	{
 		.ident = "Dell Computer Corporation",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
@@ -467,7 +473,7 @@ static struct backlight_ops dell_ops = {
 	.update_status  = dell_send_intensity,
 };
 
-bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
+static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
 			      struct serio *port)
 {
 	static bool extended;
@@ -621,4 +627,5 @@ MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
 MODULE_DESCRIPTION("Dell laptop driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*");
+MODULE_ALIAS("dmi:*svnDellInc.:*:ct9:*");
 MODULE_ALIAS("dmi:*svnDellComputerCorporation.:*:ct8:*");
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 66f53c3c35e..08fb70f6d9b 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -221,7 +221,7 @@ static void dell_wmi_notify(u32 value, void *context)
 			return;
 		}
 
-		if (dell_new_hk_type)
+		if (dell_new_hk_type || buffer_entry[1] == 0x0)
 			reported_key = (int)buffer_entry[2];
 		else
 			reported_key = (int)buffer_entry[1] & 0xffff;
@@ -339,13 +339,18 @@ static int __init dell_wmi_init(void)
 	acpi_video = acpi_video_backlight_support();
 
 	err = dell_wmi_input_setup();
-	if (err)
+	if (err) {
+		if (dell_new_hk_type)
+			kfree(dell_wmi_keymap);
 		return err;
+	}
 
 	status = wmi_install_notify_handler(DELL_EVENT_GUID,
 					 dell_wmi_notify, NULL);
 	if (ACPI_FAILURE(status)) {
 		input_unregister_device(dell_wmi_input_dev);
+		if (dell_new_hk_type)
+			kfree(dell_wmi_keymap);
 		printk(KERN_ERR
 			"dell-wmi: Unable to register notify handler - %d\n",
 			status);
@@ -359,6 +364,8 @@ static void __exit dell_wmi_exit(void)
 {
 	wmi_remove_notify_handler(DELL_EVENT_GUID);
 	input_unregister_device(dell_wmi_input_dev);
+	if (dell_new_hk_type)
+		kfree(dell_wmi_keymap);
 }
 
 module_init(dell_wmi_init);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 0306174ba87..6b8e06206c4 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 
 static bool hotplug_disabled;
 
-module_param(hotplug_disabled, bool, 0644);
+module_param(hotplug_disabled, bool, 0444);
 MODULE_PARM_DESC(hotplug_disabled,
 		 "Disable hotplug for wireless device. "
 		 "If your laptop need that, please report to "
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index e325aeb37d2..f44cd2620ff 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -182,7 +182,7 @@ static enum led_brightness logolamp_get(struct led_classdev *cdev);
 static void logolamp_set(struct led_classdev *cdev,
 			       enum led_brightness brightness);
 
-struct led_classdev logolamp_led = {
+static struct led_classdev logolamp_led = {
  .name = "fujitsu::logolamp",
  .brightness_get = logolamp_get,
  .brightness_set = logolamp_set
@@ -192,7 +192,7 @@ static enum led_brightness kblamps_get(struct led_classdev *cdev);
 static void kblamps_set(struct led_classdev *cdev,
 			       enum led_brightness brightness);
 
-struct led_classdev kblamps_led = {
+static struct led_classdev kblamps_led = {
  .name = "fujitsu::kblamps",
  .brightness_get = kblamps_get,
  .brightness_set = kblamps_set
@@ -603,7 +603,7 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id)
 	dmi_check_cb_common(id);
 	fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */
 	fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */
-	return 0;
+	return 1;
 }
 
 static int dmi_check_cb_s6420(const struct dmi_system_id *id)
@@ -611,7 +611,7 @@ static int dmi_check_cb_s6420(const struct dmi_system_id *id)
 	dmi_check_cb_common(id);
 	fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */
 	fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */
-	return 0;
+	return 1;
 }
 
 static int dmi_check_cb_p8010(const struct dmi_system_id *id)
@@ -620,7 +620,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id)
 	fujitsu->keycode1 = KEY_HELP;	/* "Support" */
 	fujitsu->keycode3 = KEY_SWITCHVIDEOMODE;	/* "Presentation" */
 	fujitsu->keycode4 = KEY_WWW;	/* "Internet" */
-	return 0;
+	return 1;
 }
 
 static struct dmi_system_id fujitsu_dmi_table[] = {
@@ -725,6 +725,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 
 err_unregister_input_dev:
 	input_unregister_device(input);
+	input = NULL;
 err_free_input_dev:
 	input_free_device(input);
 err_stop:
@@ -738,8 +739,6 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type)
 
 	input_unregister_device(input);
 
-	input_free_device(input);
-
 	fujitsu->acpi_handle = NULL;
 
 	return 0;
@@ -930,6 +929,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 
 err_unregister_input_dev:
 	input_unregister_device(input);
+	input = NULL;
 err_free_input_dev:
 	input_free_device(input);
 err_free_fifo:
@@ -953,8 +953,6 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
 
 	input_unregister_device(input);
 
-	input_free_device(input);
-
 	kfifo_free(&fujitsu_hotkey->fifo);
 
 	fujitsu_hotkey->acpi_handle = NULL;
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 51c07a05a7b..f1551637498 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/input.h>
-#include <acpi/acpi_drivers.h>
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
@@ -52,12 +51,25 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_HOTKEY_QUERY 0xc
 
+#define PREFIX "HP WMI: "
+#define UNIMP "Unimplemented "
+
 enum hp_wmi_radio {
 	HPWMI_WIFI = 0,
 	HPWMI_BLUETOOTH = 1,
 	HPWMI_WWAN = 2,
 };
 
+enum hp_wmi_event_ids {
+	HPWMI_DOCK_EVENT = 1,
+	HPWMI_PARK_HDD = 2,
+	HPWMI_SMART_ADAPTER = 3,
+	HPWMI_BEZEL_BUTTON = 4,
+	HPWMI_WIRELESS = 5,
+	HPWMI_CPU_BATTERY_THROTTLE = 6,
+	HPWMI_LOCK_SWITCH = 7,
+};
+
 static int __devinit hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct device *device);
@@ -67,13 +79,12 @@ struct bios_args {
 	u32 command;
 	u32 commandtype;
 	u32 datasize;
-	u32 data;
+	char *data;
 };
 
 struct bios_return {
 	u32 sigpass;
 	u32 return_code;
-	u32 value;
 };
 
 struct key_entry {
@@ -88,6 +99,7 @@ static struct key_entry hp_wmi_keymap[] = {
 	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
 	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
 	{KE_KEY, 0x20e6, KEY_PROG1},
+	{KE_KEY, 0x20e8, KEY_MEDIA},
 	{KE_KEY, 0x2142, KEY_MEDIA},
 	{KE_KEY, 0x213b, KEY_INFO},
 	{KE_KEY, 0x2169, KEY_DIRECTION},
@@ -117,7 +129,27 @@ static struct platform_driver hp_wmi_driver = {
 	.remove = hp_wmi_bios_remove,
 };
 
-static int hp_wmi_perform_query(int query, int write, int value)
+/*
+ * hp_wmi_perform_query
+ *
+ * query:	The commandtype -> What should be queried
+ * write:	The command -> 0 read, 1 write, 3 ODM specific
+ * buffer:	Buffer used as input and/or output
+ * buffersize:	Size of buffer
+ *
+ * returns zero on success
+ *         an HP WMI query specific error code (which is positive)
+ *         -EINVAL if the query was not successful at all
+ *         -EINVAL if the output buffer size exceeds buffersize
+ *
+ * Note: The buffersize must at least be the maximum of the input and output
+ *       size. E.g. Battery info query (0x7) is defined to have 1 byte input
+ *       and 128 byte output. The caller would do:
+ *       buffer = kzalloc(128, GFP_KERNEL);
+ *       ret = hp_wmi_perform_query(0x7, 0, buffer, 128)
+ */
+static int hp_wmi_perform_query(int query, int write, char *buffer,
+				int buffersize)
 {
 	struct bios_return bios_return;
 	acpi_status status;
@@ -126,8 +158,8 @@ static int hp_wmi_perform_query(int query, int write, int value)
 		.signature = 0x55434553,
 		.command = write ? 0x2 : 0x1,
 		.commandtype = query,
-		.datasize = write ? 0x4 : 0,
-		.data = value,
+		.datasize = buffersize,
+		.data = buffer,
 	};
 	struct acpi_buffer input = { sizeof(struct bios_args), &args };
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -144,54 +176,90 @@ static int hp_wmi_perform_query(int query, int write, int value)
 	}
 
 	bios_return = *((struct bios_return *)obj->buffer.pointer);
+
+	if (bios_return.return_code) {
+		printk(KERN_WARNING PREFIX "Query %d returned %d\n", query,
+		       bios_return.return_code);
+		kfree(obj);
+		return bios_return.return_code;
+	}
+	if (obj->buffer.length - sizeof(bios_return) > buffersize) {
+		kfree(obj);
+		return -EINVAL;
+	}
+
+	memset(buffer, 0, buffersize);
+	memcpy(buffer,
+	       ((char *)obj->buffer.pointer) + sizeof(struct bios_return),
+	       obj->buffer.length - sizeof(bios_return));
 	kfree(obj);
-	if (bios_return.return_code > 0)
-		return bios_return.return_code * -1;
-	else
-		return bios_return.value;
+	return 0;
 }
 
 static int hp_wmi_display_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_hddtemp_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_als_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_dock_state(void)
 {
-	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, (char *)&state,
+				       sizeof(state));
 
-	if (ret < 0)
-		return ret;
+	if (ret)
+		return -EINVAL;
 
-	return ret & 0x1;
+	return state & 0x1;
 }
 
 static int hp_wmi_tablet_state(void)
 {
-	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
-
-	if (ret < 0)
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
 		return ret;
 
-	return (ret & 0x4) ? 1 : 0;
+	return (state & 0x4) ? 1 : 0;
 }
 
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	enum hp_wmi_radio r = (enum hp_wmi_radio) data;
 	int query = BIT(r + 8) | ((!blocked) << r);
+	int ret;
 
-	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
+	ret = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1,
+				   (char *)&query, sizeof(query));
+	if (ret)
+		return -EINVAL;
+	return 0;
 }
 
 static const struct rfkill_ops hp_wmi_rfkill_ops = {
@@ -200,8 +268,13 @@ static const struct rfkill_ops hp_wmi_rfkill_ops = {
 
 static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
 {
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
-	int mask = 0x200 << (r * 8);
+	int wireless;
+	int mask;
+	hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0,
+			     (char *)&wireless, sizeof(wireless));
+	/* TBD: Pass error */
+
+	mask = 0x200 << (r * 8);
 
 	if (wireless & mask)
 		return false;
@@ -211,8 +284,13 @@ static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
 
 static bool hp_wmi_get_hw_state(enum hp_wmi_radio r)
 {
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
-	int mask = 0x800 << (r * 8);
+	int wireless;
+	int mask;
+	hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0,
+			     (char *)&wireless, sizeof(wireless));
+	/* TBD: Pass error */
+
+	mask = 0x800 << (r * 8);
 
 	if (wireless & mask)
 		return false;
@@ -269,7 +347,11 @@ static ssize_t set_als(struct device *dev, struct device_attribute *attr,
 		       const char *buf, size_t count)
 {
 	u32 tmp = simple_strtoul(buf, NULL, 10);
-	hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, tmp);
+	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, (char *)&tmp,
+				       sizeof(tmp));
+	if (ret)
+		return -EINVAL;
+
 	return count;
 }
 
@@ -338,47 +420,82 @@ static void hp_wmi_notify(u32 value, void *context)
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	static struct key_entry *key;
 	union acpi_object *obj;
-	int eventcode;
+	u32 event_id, event_data;
+	int key_code, ret;
+	u32 *location;
 	acpi_status status;
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status);
+		printk(KERN_INFO PREFIX "bad event status 0x%x\n", status);
 		return;
 	}
 
 	obj = (union acpi_object *)response.pointer;
 
-	if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) {
-		printk(KERN_INFO "HP WMI: Unknown response received\n");
+	if (!obj)
+		return;
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		printk(KERN_INFO "hp-wmi: Unknown response received %d\n",
+		       obj->type);
 		kfree(obj);
 		return;
 	}
 
-	eventcode = *((u8 *) obj->buffer.pointer);
+	/*
+	 * Depending on ACPI version the concatenation of id and event data
+	 * inside _WED function will result in a 8 or 16 byte buffer.
+	 */
+	location = (u32 *)obj->buffer.pointer;
+	if (obj->buffer.length == 8) {
+		event_id = *location;
+		event_data = *(location + 1);
+	} else if (obj->buffer.length == 16) {
+		event_id = *location;
+		event_data = *(location + 2);
+	} else {
+		printk(KERN_INFO "hp-wmi: Unknown buffer length %d\n",
+		       obj->buffer.length);
+		kfree(obj);
+		return;
+	}
 	kfree(obj);
-	if (eventcode == 0x4)
-		eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
-						0);
-	key = hp_wmi_get_entry_by_scancode(eventcode);
-	if (key) {
-		switch (key->type) {
-		case KE_KEY:
-			input_report_key(hp_wmi_input_dev,
-					 key->keycode, 1);
-			input_sync(hp_wmi_input_dev);
-			input_report_key(hp_wmi_input_dev,
-					 key->keycode, 0);
-			input_sync(hp_wmi_input_dev);
-			break;
-		}
-	} else if (eventcode == 0x1) {
+
+	switch (event_id) {
+	case HPWMI_DOCK_EVENT:
 		input_report_switch(hp_wmi_input_dev, SW_DOCK,
 				    hp_wmi_dock_state());
 		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
 				    hp_wmi_tablet_state());
 		input_sync(hp_wmi_input_dev);
-	} else if (eventcode == 0x5) {
+		break;
+	case HPWMI_PARK_HDD:
+		break;
+	case HPWMI_SMART_ADAPTER:
+		break;
+	case HPWMI_BEZEL_BUTTON:
+		ret = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+					   (char *)&key_code,
+					   sizeof(key_code));
+		if (ret)
+			break;
+		key = hp_wmi_get_entry_by_scancode(key_code);
+		if (key) {
+			switch (key->type) {
+			case KE_KEY:
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 1);
+				input_sync(hp_wmi_input_dev);
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 0);
+				input_sync(hp_wmi_input_dev);
+				break;
+			}
+		} else
+			printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n",
+			       key_code);
+		break;
+	case HPWMI_WIRELESS:
 		if (wifi_rfkill)
 			rfkill_set_states(wifi_rfkill,
 					  hp_wmi_get_sw_state(HPWMI_WIFI),
@@ -391,9 +508,18 @@ static void hp_wmi_notify(u32 value, void *context)
 			rfkill_set_states(wwan_rfkill,
 					  hp_wmi_get_sw_state(HPWMI_WWAN),
 					  hp_wmi_get_hw_state(HPWMI_WWAN));
-	} else
-		printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
-			eventcode);
+		break;
+	case HPWMI_CPU_BATTERY_THROTTLE:
+		printk(KERN_INFO PREFIX UNIMP "CPU throttle because of 3 Cell"
+		       " battery event detected\n");
+		break;
+	case HPWMI_LOCK_SWITCH:
+		break;
+	default:
+		printk(KERN_INFO PREFIX "Unknown event_id - %d - 0x%x\n",
+		       event_id, event_data);
+		break;
+	}
 }
 
 static int __init hp_wmi_input_setup(void)
@@ -402,6 +528,8 @@ static int __init hp_wmi_input_setup(void)
 	int err;
 
 	hp_wmi_input_dev = input_allocate_device();
+	if (!hp_wmi_input_dev)
+		return -ENOMEM;
 
 	hp_wmi_input_dev->name = "HP WMI hotkeys";
 	hp_wmi_input_dev->phys = "wmi/input0";
@@ -450,7 +578,12 @@ static void cleanup_sysfs(struct platform_device *device)
 static int __devinit hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+	int wireless;
+
+	err = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, (char *)&wireless,
+				   sizeof(wireless));
+	if (err)
+		return err;
 
 	err = device_create_file(&device->dev, &dev_attr_display);
 	if (err)
@@ -581,27 +714,51 @@ static int hp_wmi_resume_handler(struct device *device)
 static int __init hp_wmi_init(void)
 {
 	int err;
+	int event_capable = wmi_has_guid(HPWMI_EVENT_GUID);
+	int bios_capable = wmi_has_guid(HPWMI_BIOS_GUID);
 
-	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+	if (event_capable) {
 		err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
 						 hp_wmi_notify, NULL);
-		if (ACPI_SUCCESS(err))
-			hp_wmi_input_setup();
+		if (ACPI_FAILURE(err))
+			return -EINVAL;
+		err = hp_wmi_input_setup();
+		if (err) {
+			wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+			return err;
+		}
 	}
 
-	if (wmi_has_guid(HPWMI_BIOS_GUID)) {
+	if (bios_capable) {
 		err = platform_driver_register(&hp_wmi_driver);
 		if (err)
-			return 0;
+			goto err_driver_reg;
 		hp_wmi_platform_dev = platform_device_alloc("hp-wmi", -1);
 		if (!hp_wmi_platform_dev) {
-			platform_driver_unregister(&hp_wmi_driver);
-			return 0;
+			err = -ENOMEM;
+			goto err_device_alloc;
 		}
-		platform_device_add(hp_wmi_platform_dev);
+		err = platform_device_add(hp_wmi_platform_dev);
+		if (err)
+			goto err_device_add;
 	}
 
+	if (!bios_capable && !event_capable)
+		return -ENODEV;
+
 	return 0;
+
+err_device_add:
+	platform_device_put(hp_wmi_platform_dev);
+err_device_alloc:
+	platform_driver_unregister(&hp_wmi_driver);
+err_driver_reg:
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		input_unregister_device(hp_wmi_input_dev);
+		wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+	}
+
+	return err;
 }
 
 static void __exit hp_wmi_exit(void)
@@ -611,7 +768,7 @@ static void __exit hp_wmi_exit(void)
 		input_unregister_device(hp_wmi_input_dev);
 	}
 	if (hp_wmi_platform_dev) {
-		platform_device_del(hp_wmi_platform_dev);
+		platform_device_unregister(hp_wmi_platform_dev);
 		platform_driver_unregister(&hp_wmi_driver);
 	}
 }
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
new file mode 100644
index 00000000000..afe82e50dfe
--- /dev/null
+++ b/drivers/platform/x86/intel_ips.c
@@ -0,0 +1,1660 @@
+/*
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Authors:
+ *	Jesse Barnes <jbarnes@virtuousgeek.org>
+ */
+
+/*
+ * Some Intel Ibex Peak based platforms support so-called "intelligent
+ * power sharing", which allows the CPU and GPU to cooperate to maximize
+ * performance within a given TDP (thermal design point).  This driver
+ * performs the coordination between the CPU and GPU, monitors thermal and
+ * power statistics in the platform, and initializes power monitoring
+ * hardware.  It also provides a few tunables to control behavior.  Its
+ * primary purpose is to safely allow CPU and GPU turbo modes to be enabled
+ * by tracking power and thermal budget; secondarily it can boost turbo
+ * performance by allocating more power or thermal budget to the CPU or GPU
+ * based on available headroom and activity.
+ *
+ * The basic algorithm is driven by a 5s moving average of tempurature.  If
+ * thermal headroom is available, the CPU and/or GPU power clamps may be
+ * adjusted upwards.  If we hit the thermal ceiling or a thermal trigger,
+ * we scale back the clamp.  Aside from trigger events (when we're critically
+ * close or over our TDP) we don't adjust the clamps more than once every
+ * five seconds.
+ *
+ * The thermal device (device 31, function 6) has a set of registers that
+ * are updated by the ME firmware.  The ME should also take the clamp values
+ * written to those registers and write them to the CPU, but we currently
+ * bypass that functionality and write the CPU MSR directly.
+ *
+ * UNSUPPORTED:
+ *   - dual MCP configs
+ *
+ * TODO:
+ *   - handle CPU hotplug
+ *   - provide turbo enable/disable api
+ *   - make sure we can write turbo enable/disable reg based on MISC_EN
+ *
+ * Related documents:
+ *   - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
+ *   - CDI 401376 - Ibex Peak EDS
+ *   - ref 26037, 26641 - IPS BIOS spec
+ *   - ref 26489 - Nehalem BIOS writer's guide
+ *   - ref 26921 - Ibex Peak BIOS Specification
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/tick.h>
+#include <linux/timer.h>
+#include <drm/i915_drm.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
+
+/*
+ * Package level MSRs for monitor/control
+ */
+#define PLATFORM_INFO	0xce
+#define   PLATFORM_TDP		(1<<29)
+#define   PLATFORM_RATIO	(1<<28)
+
+#define IA32_MISC_ENABLE	0x1a0
+#define   IA32_MISC_TURBO_EN	(1ULL<<38)
+
+#define TURBO_POWER_CURRENT_LIMIT	0x1ac
+#define   TURBO_TDC_OVR_EN	(1UL<<31)
+#define   TURBO_TDC_MASK	(0x000000007fff0000UL)
+#define   TURBO_TDC_SHIFT	(16)
+#define   TURBO_TDP_OVR_EN	(1UL<<15)
+#define   TURBO_TDP_MASK	(0x0000000000003fffUL)
+
+/*
+ * Core/thread MSRs for monitoring
+ */
+#define IA32_PERF_CTL		0x199
+#define   IA32_PERF_TURBO_DIS	(1ULL<<32)
+
+/*
+ * Thermal PCI device regs
+ */
+#define THM_CFG_TBAR	0x10
+#define THM_CFG_TBAR_HI	0x14
+
+#define THM_TSIU	0x00
+#define THM_TSE		0x01
+#define   TSE_EN	0xb8
+#define THM_TSS		0x02
+#define THM_TSTR	0x03
+#define THM_TSTTP	0x04
+#define THM_TSCO	0x08
+#define THM_TSES	0x0c
+#define THM_TSGPEN	0x0d
+#define   TSGPEN_HOT_LOHI	(1<<1)
+#define   TSGPEN_CRIT_LOHI	(1<<2)
+#define THM_TSPC	0x0e
+#define THM_PPEC	0x10
+#define THM_CTA		0x12
+#define THM_PTA		0x14
+#define   PTA_SLOPE_MASK	(0xff00)
+#define   PTA_SLOPE_SHIFT	8
+#define   PTA_OFFSET_MASK	(0x00ff)
+#define THM_MGTA	0x16
+#define   MGTA_SLOPE_MASK	(0xff00)
+#define   MGTA_SLOPE_SHIFT	8
+#define   MGTA_OFFSET_MASK	(0x00ff)
+#define THM_TRC		0x1a
+#define   TRC_CORE2_EN	(1<<15)
+#define   TRC_THM_EN	(1<<12)
+#define   TRC_C6_WAR	(1<<8)
+#define   TRC_CORE1_EN	(1<<7)
+#define   TRC_CORE_PWR	(1<<6)
+#define   TRC_PCH_EN	(1<<5)
+#define   TRC_MCH_EN	(1<<4)
+#define   TRC_DIMM4	(1<<3)
+#define   TRC_DIMM3	(1<<2)
+#define   TRC_DIMM2	(1<<1)
+#define   TRC_DIMM1	(1<<0)
+#define THM_TES		0x20
+#define THM_TEN		0x21
+#define   TEN_UPDATE_EN	1
+#define THM_PSC		0x24
+#define   PSC_NTG	(1<<0) /* No GFX turbo support */
+#define   PSC_NTPC	(1<<1) /* No CPU turbo support */
+#define   PSC_PP_DEF	(0<<2) /* Perf policy up to driver */
+#define   PSP_PP_PC	(1<<2) /* BIOS prefers CPU perf */
+#define   PSP_PP_BAL	(2<<2) /* BIOS wants balanced perf */
+#define   PSP_PP_GFX	(3<<2) /* BIOS prefers GFX perf */
+#define   PSP_PBRT	(1<<4) /* BIOS run time support */
+#define THM_CTV1	0x30
+#define   CTV_TEMP_ERROR (1<<15)
+#define   CTV_TEMP_MASK	0x3f
+#define   CTV_
+#define THM_CTV2	0x32
+#define THM_CEC		0x34 /* undocumented power accumulator in joules */
+#define THM_AE		0x3f
+#define THM_HTS		0x50 /* 32 bits */
+#define   HTS_PCPL_MASK	(0x7fe00000)
+#define   HTS_PCPL_SHIFT 21
+#define   HTS_GPL_MASK  (0x001ff000)
+#define   HTS_GPL_SHIFT 12
+#define   HTS_PP_MASK	(0x00000c00)
+#define   HTS_PP_SHIFT  10
+#define   HTS_PP_DEF	0
+#define   HTS_PP_PROC	1
+#define   HTS_PP_BAL	2
+#define   HTS_PP_GFX	3
+#define   HTS_PCTD_DIS	(1<<9)
+#define   HTS_GTD_DIS	(1<<8)
+#define   HTS_PTL_MASK  (0x000000fe)
+#define   HTS_PTL_SHIFT 1
+#define   HTS_NVV	(1<<0)
+#define THM_HTSHI	0x54 /* 16 bits */
+#define   HTS2_PPL_MASK		(0x03ff)
+#define   HTS2_PRST_MASK	(0x3c00)
+#define   HTS2_PRST_SHIFT	10
+#define   HTS2_PRST_UNLOADED	0
+#define   HTS2_PRST_RUNNING	1
+#define   HTS2_PRST_TDISOP	2 /* turbo disabled due to power */
+#define   HTS2_PRST_TDISHT	3 /* turbo disabled due to high temp */
+#define   HTS2_PRST_TDISUSR	4 /* user disabled turbo */
+#define   HTS2_PRST_TDISPLAT	5 /* platform disabled turbo */
+#define   HTS2_PRST_TDISPM	6 /* power management disabled turbo */
+#define   HTS2_PRST_TDISERR	7 /* some kind of error disabled turbo */
+#define THM_PTL		0x56
+#define THM_MGTV	0x58
+#define   TV_MASK	0x000000000000ff00
+#define   TV_SHIFT	8
+#define THM_PTV		0x60
+#define   PTV_MASK	0x00ff
+#define THM_MMGPC	0x64
+#define THM_MPPC	0x66
+#define THM_MPCPC	0x68
+#define THM_TSPIEN	0x82
+#define   TSPIEN_AUX_LOHI	(1<<0)
+#define   TSPIEN_HOT_LOHI	(1<<1)
+#define   TSPIEN_CRIT_LOHI	(1<<2)
+#define   TSPIEN_AUX2_LOHI	(1<<3)
+#define THM_TSLOCK	0x83
+#define THM_ATR		0x84
+#define THM_TOF		0x87
+#define THM_STS		0x98
+#define   STS_PCPL_MASK		(0x7fe00000)
+#define   STS_PCPL_SHIFT	21
+#define   STS_GPL_MASK		(0x001ff000)
+#define   STS_GPL_SHIFT		12
+#define   STS_PP_MASK		(0x00000c00)
+#define   STS_PP_SHIFT		10
+#define   STS_PP_DEF		0
+#define   STS_PP_PROC		1
+#define   STS_PP_BAL		2
+#define   STS_PP_GFX		3
+#define   STS_PCTD_DIS		(1<<9)
+#define   STS_GTD_DIS		(1<<8)
+#define   STS_PTL_MASK		(0x000000fe)
+#define   STS_PTL_SHIFT		1
+#define   STS_NVV		(1<<0)
+#define THM_SEC		0x9c
+#define   SEC_ACK	(1<<0)
+#define THM_TC3		0xa4
+#define THM_TC1		0xa8
+#define   STS_PPL_MASK		(0x0003ff00)
+#define   STS_PPL_SHIFT		16
+#define THM_TC2		0xac
+#define THM_DTV		0xb0
+#define THM_ITV		0xd8
+#define   ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define   ITV_ME_SEQNO_SHIFT (16)
+#define   ITV_MCH_TEMP_MASK 0x0000ff00
+#define   ITV_MCH_TEMP_SHIFT (8)
+#define   ITV_PCH_TEMP_MASK 0x000000ff
+
+#define thm_readb(off) readb(ips->regmap + (off))
+#define thm_readw(off) readw(ips->regmap + (off))
+#define thm_readl(off) readl(ips->regmap + (off))
+#define thm_readq(off) readq(ips->regmap + (off))
+
+#define thm_writeb(off, val) writeb((val), ips->regmap + (off))
+#define thm_writew(off, val) writew((val), ips->regmap + (off))
+#define thm_writel(off, val) writel((val), ips->regmap + (off))
+
+static const int IPS_ADJUST_PERIOD = 5000; /* ms */
+
+/* For initial average collection */
+static const int IPS_SAMPLE_PERIOD = 200; /* ms */
+static const int IPS_SAMPLE_WINDOW = 5000; /* 5s moving window of samples */
+#define IPS_SAMPLE_COUNT (IPS_SAMPLE_WINDOW / IPS_SAMPLE_PERIOD)
+
+/* Per-SKU limits */
+struct ips_mcp_limits {
+	int cpu_family;
+	int cpu_model; /* includes extended model... */
+	int mcp_power_limit; /* mW units */
+	int core_power_limit;
+	int mch_power_limit;
+	int core_temp_limit; /* degrees C */
+	int mch_temp_limit;
+};
+
+/* Max temps are -10 degrees C to avoid PROCHOT# */
+
+struct ips_mcp_limits ips_sv_limits = {
+	.mcp_power_limit = 35000,
+	.core_power_limit = 29000,
+	.mch_power_limit = 20000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_mcp_limits ips_lv_limits = {
+	.mcp_power_limit = 25000,
+	.core_power_limit = 21000,
+	.mch_power_limit = 13000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_mcp_limits ips_ulv_limits = {
+	.mcp_power_limit = 18000,
+	.core_power_limit = 14000,
+	.mch_power_limit = 11000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_driver {
+	struct pci_dev *dev;
+	void *regmap;
+	struct task_struct *monitor;
+	struct task_struct *adjust;
+	struct dentry *debug_root;
+
+	/* Average CPU core temps (all averages in .01 degrees C for precision) */
+	u16 ctv1_avg_temp;
+	u16 ctv2_avg_temp;
+	/* GMCH average */
+	u16 mch_avg_temp;
+	/* Average for the CPU (both cores?) */
+	u16 mcp_avg_temp;
+	/* Average power consumption (in mW) */
+	u32 cpu_avg_power;
+	u32 mch_avg_power;
+
+	/* Offset values */
+	u16 cta_val;
+	u16 pta_val;
+	u16 mgta_val;
+
+	/* Maximums & prefs, protected by turbo status lock */
+	spinlock_t turbo_status_lock;
+	u16 mcp_temp_limit;
+	u16 mcp_power_limit;
+	u16 core_power_limit;
+	u16 mch_power_limit;
+	bool cpu_turbo_enabled;
+	bool __cpu_turbo_on;
+	bool gpu_turbo_enabled;
+	bool __gpu_turbo_on;
+	bool gpu_preferred;
+	bool poll_turbo_status;
+	bool second_cpu;
+	struct ips_mcp_limits *limits;
+
+	/* Optional MCH interfaces for if i915 is in use */
+	unsigned long (*read_mch_val)(void);
+	bool (*gpu_raise)(void);
+	bool (*gpu_lower)(void);
+	bool (*gpu_busy)(void);
+	bool (*gpu_turbo_disable)(void);
+
+	/* For restoration at unload */
+	u64 orig_turbo_limit;
+	u64 orig_turbo_ratios;
+};
+
+/**
+ * ips_cpu_busy - is CPU busy?
+ * @ips: IPS driver struct
+ *
+ * Check CPU for load to see whether we should increase its thermal budget.
+ *
+ * RETURNS:
+ * True if the CPU could use more power, false otherwise.
+ */
+static bool ips_cpu_busy(struct ips_driver *ips)
+{
+	if ((avenrun[0] >> FSHIFT) > 1)
+		return true;
+
+	return false;
+}
+
+/**
+ * ips_cpu_raise - raise CPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Raise the CPU power clamp by %IPS_CPU_STEP, in accordance with TDP for
+ * this platform.
+ *
+ * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR upwards (as
+ * long as we haven't hit the TDP limit for the SKU).
+ */
+static void ips_cpu_raise(struct ips_driver *ips)
+{
+	u64 turbo_override;
+	u16 cur_tdp_limit, new_tdp_limit;
+
+	if (!ips->cpu_turbo_enabled)
+		return;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	cur_tdp_limit = turbo_override & TURBO_TDP_MASK;
+	new_tdp_limit = cur_tdp_limit + 8; /* 1W increase */
+
+	/* Clamp to SKU TDP limit */
+	if (((new_tdp_limit * 10) / 8) > ips->core_power_limit)
+		new_tdp_limit = cur_tdp_limit;
+
+	thm_writew(THM_MPCPC, (new_tdp_limit * 10) / 8);
+
+	turbo_override |= TURBO_TDC_OVR_EN | TURBO_TDC_OVR_EN;
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	turbo_override &= ~TURBO_TDP_MASK;
+	turbo_override |= new_tdp_limit;
+
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+}
+
+/**
+ * ips_cpu_lower - lower CPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Lower CPU power clamp b %IPS_CPU_STEP if possible.
+ *
+ * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR down, going
+ * as low as the platform limits will allow (though we could go lower there
+ * wouldn't be much point).
+ */
+static void ips_cpu_lower(struct ips_driver *ips)
+{
+	u64 turbo_override;
+	u16 cur_limit, new_limit;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	cur_limit = turbo_override & TURBO_TDP_MASK;
+	new_limit = cur_limit - 8; /* 1W decrease */
+
+	/* Clamp to SKU TDP limit */
+	if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+		new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
+
+	thm_writew(THM_MPCPC, (new_limit * 10) / 8);
+
+	turbo_override |= TURBO_TDC_OVR_EN | TURBO_TDC_OVR_EN;
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	turbo_override &= ~TURBO_TDP_MASK;
+	turbo_override |= new_limit;
+
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+}
+
+/**
+ * do_enable_cpu_turbo - internal turbo enable function
+ * @data: unused
+ *
+ * Internal function for actually updating MSRs.  When we enable/disable
+ * turbo, we need to do it on each CPU; this function is the one called
+ * by on_each_cpu() when needed.
+ */
+static void do_enable_cpu_turbo(void *data)
+{
+	u64 perf_ctl;
+
+	rdmsrl(IA32_PERF_CTL, perf_ctl);
+	if (perf_ctl & IA32_PERF_TURBO_DIS) {
+		perf_ctl &= ~IA32_PERF_TURBO_DIS;
+		wrmsrl(IA32_PERF_CTL, perf_ctl);
+	}
+}
+
+/**
+ * ips_enable_cpu_turbo - enable turbo mode on all CPUs
+ * @ips: IPS driver struct
+ *
+ * Enable turbo mode by clearing the disable bit in IA32_PERF_CTL on
+ * all logical threads.
+ */
+static void ips_enable_cpu_turbo(struct ips_driver *ips)
+{
+	/* Already on, no need to mess with MSRs */
+	if (ips->__cpu_turbo_on)
+		return;
+
+	on_each_cpu(do_enable_cpu_turbo, ips, 1);
+
+	ips->__cpu_turbo_on = true;
+}
+
+/**
+ * do_disable_cpu_turbo - internal turbo disable function
+ * @data: unused
+ *
+ * Internal function for actually updating MSRs.  When we enable/disable
+ * turbo, we need to do it on each CPU; this function is the one called
+ * by on_each_cpu() when needed.
+ */
+static void do_disable_cpu_turbo(void *data)
+{
+	u64 perf_ctl;
+
+	rdmsrl(IA32_PERF_CTL, perf_ctl);
+	if (!(perf_ctl & IA32_PERF_TURBO_DIS)) {
+		perf_ctl |= IA32_PERF_TURBO_DIS;
+		wrmsrl(IA32_PERF_CTL, perf_ctl);
+	}
+}
+
+/**
+ * ips_disable_cpu_turbo - disable turbo mode on all CPUs
+ * @ips: IPS driver struct
+ *
+ * Disable turbo mode by setting the disable bit in IA32_PERF_CTL on
+ * all logical threads.
+ */
+static void ips_disable_cpu_turbo(struct ips_driver *ips)
+{
+	/* Already off, leave it */
+	if (!ips->__cpu_turbo_on)
+		return;
+
+	on_each_cpu(do_disable_cpu_turbo, ips, 1);
+
+	ips->__cpu_turbo_on = false;
+}
+
+/**
+ * ips_gpu_busy - is GPU busy?
+ * @ips: IPS driver struct
+ *
+ * Check GPU for load to see whether we should increase its thermal budget.
+ * We need to call into the i915 driver in this case.
+ *
+ * RETURNS:
+ * True if the GPU could use more power, false otherwise.
+ */
+static bool ips_gpu_busy(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return false;
+
+	return ips->gpu_busy();
+}
+
+/**
+ * ips_gpu_raise - raise GPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Raise the GPU frequency/power if possible.  We need to call into the
+ * i915 driver in this case.
+ */
+static void ips_gpu_raise(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return;
+
+	if (!ips->gpu_raise())
+		ips->gpu_turbo_enabled = false;
+
+	return;
+}
+
+/**
+ * ips_gpu_lower - lower GPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Lower GPU frequency/power if possible.  Need to call i915.
+ */
+static void ips_gpu_lower(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return;
+
+	if (!ips->gpu_lower())
+		ips->gpu_turbo_enabled = false;
+
+	return;
+}
+
+/**
+ * ips_enable_gpu_turbo - notify the gfx driver turbo is available
+ * @ips: IPS driver struct
+ *
+ * Call into the graphics driver indicating that it can safely use
+ * turbo mode.
+ */
+static void ips_enable_gpu_turbo(struct ips_driver *ips)
+{
+	if (ips->__gpu_turbo_on)
+		return;
+	ips->__gpu_turbo_on = true;
+}
+
+/**
+ * ips_disable_gpu_turbo - notify the gfx driver to disable turbo mode
+ * @ips: IPS driver struct
+ *
+ * Request that the graphics driver disable turbo mode.
+ */
+static void ips_disable_gpu_turbo(struct ips_driver *ips)
+{
+	/* Avoid calling i915 if turbo is already disabled */
+	if (!ips->__gpu_turbo_on)
+		return;
+
+	if (!ips->gpu_turbo_disable())
+		dev_err(&ips->dev->dev, "failed to disable graphis turbo\n");
+	else
+		ips->__gpu_turbo_on = false;
+}
+
+/**
+ * mcp_exceeded - check whether we're outside our thermal & power limits
+ * @ips: IPS driver struct
+ *
+ * Check whether the MCP is over its thermal or power budget.
+ */
+static bool mcp_exceeded(struct ips_driver *ips)
+{
+	unsigned long flags;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
+		ret = true;
+	if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	if (ret)
+		dev_info(&ips->dev->dev,
+			 "MCP power or thermal limit exceeded\n");
+
+	return ret;
+}
+
+/**
+ * cpu_exceeded - check whether a CPU core is outside its limits
+ * @ips: IPS driver struct
+ * @cpu: CPU number to check
+ *
+ * Check a given CPU's average temp or power is over its limit.
+ */
+static bool cpu_exceeded(struct ips_driver *ips, int cpu)
+{
+	unsigned long flags;
+	int avg;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	avg = cpu ? ips->ctv2_avg_temp : ips->ctv1_avg_temp;
+	if (avg > (ips->limits->core_temp_limit * 100))
+		ret = true;
+	if (ips->cpu_avg_power > ips->core_power_limit * 100)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	if (ret)
+		dev_info(&ips->dev->dev,
+			 "CPU power or thermal limit exceeded\n");
+
+	return ret;
+}
+
+/**
+ * mch_exceeded - check whether the GPU is over budget
+ * @ips: IPS driver struct
+ *
+ * Check the MCH temp & power against their maximums.
+ */
+static bool mch_exceeded(struct ips_driver *ips)
+{
+	unsigned long flags;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	if (ips->mch_avg_temp > (ips->limits->mch_temp_limit * 100))
+		ret = true;
+	if (ips->mch_avg_power > ips->mch_power_limit)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	return ret;
+}
+
+/**
+ * update_turbo_limits - get various limits & settings from regs
+ * @ips: IPS driver struct
+ *
+ * Update the IPS power & temp limits, along with turbo enable flags,
+ * based on latest register contents.
+ *
+ * Used at init time and for runtime BIOS support, which requires polling
+ * the regs for updates (as a result of AC->DC transition for example).
+ *
+ * LOCKING:
+ * Caller must hold turbo_status_lock (outside of init)
+ */
+static void update_turbo_limits(struct ips_driver *ips)
+{
+	u32 hts = thm_readl(THM_HTS);
+
+	ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
+	ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+	ips->core_power_limit = thm_readw(THM_MPCPC);
+	ips->mch_power_limit = thm_readw(THM_MMGPC);
+	ips->mcp_temp_limit = thm_readw(THM_PTL);
+	ips->mcp_power_limit = thm_readw(THM_MPPC);
+
+	/* Ignore BIOS CPU vs GPU pref */
+}
+
+/**
+ * ips_adjust - adjust power clamp based on thermal state
+ * @data: ips driver structure
+ *
+ * Wake up every 5s or so and check whether we should adjust the power clamp.
+ * Check CPU and GPU load to determine which needs adjustment.  There are
+ * several things to consider here:
+ *   - do we need to adjust up or down?
+ *   - is CPU busy?
+ *   - is GPU busy?
+ *   - is CPU in turbo?
+ *   - is GPU in turbo?
+ *   - is CPU or GPU preferred? (CPU is default)
+ *
+ * So, given the above, we do the following:
+ *   - up (TDP available)
+ *     - CPU not busy, GPU not busy - nothing
+ *     - CPU busy, GPU not busy - adjust CPU up
+ *     - CPU not busy, GPU busy - adjust GPU up
+ *     - CPU busy, GPU busy - adjust preferred unit up, taking headroom from
+ *       non-preferred unit if necessary
+ *   - down (at TDP limit)
+ *     - adjust both CPU and GPU down if possible
+ *
+		cpu+ gpu+	cpu+gpu-	cpu-gpu+	cpu-gpu-
+cpu < gpu <	cpu+gpu+	cpu+		gpu+		nothing
+cpu < gpu >=	cpu+gpu-(mcp<)	cpu+gpu-(mcp<)	gpu-		gpu-
+cpu >= gpu <	cpu-gpu+(mcp<)	cpu-		cpu-gpu+(mcp<)	cpu-
+cpu >= gpu >=	cpu-gpu-	cpu-gpu-	cpu-gpu-	cpu-gpu-
+ *
+ */
+static int ips_adjust(void *data)
+{
+	struct ips_driver *ips = data;
+	unsigned long flags;
+
+	dev_dbg(&ips->dev->dev, "starting ips-adjust thread\n");
+
+	/*
+	 * Adjust CPU and GPU clamps every 5s if needed.  Doing it more
+	 * often isn't recommended due to ME interaction.
+	 */
+	do {
+		bool cpu_busy = ips_cpu_busy(ips);
+		bool gpu_busy = ips_gpu_busy(ips);
+
+		spin_lock_irqsave(&ips->turbo_status_lock, flags);
+		if (ips->poll_turbo_status)
+			update_turbo_limits(ips);
+		spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+		/* Update turbo status if necessary */
+		if (ips->cpu_turbo_enabled)
+			ips_enable_cpu_turbo(ips);
+		else
+			ips_disable_cpu_turbo(ips);
+
+		if (ips->gpu_turbo_enabled)
+			ips_enable_gpu_turbo(ips);
+		else
+			ips_disable_gpu_turbo(ips);
+
+		/* We're outside our comfort zone, crank them down */
+		if (mcp_exceeded(ips)) {
+			ips_cpu_lower(ips);
+			ips_gpu_lower(ips);
+			goto sleep;
+		}
+
+		if (!cpu_exceeded(ips, 0) && cpu_busy)
+			ips_cpu_raise(ips);
+		else
+			ips_cpu_lower(ips);
+
+		if (!mch_exceeded(ips) && gpu_busy)
+			ips_gpu_raise(ips);
+		else
+			ips_gpu_lower(ips);
+
+sleep:
+		schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD));
+	} while (!kthread_should_stop());
+
+	dev_dbg(&ips->dev->dev, "ips-adjust thread stopped\n");
+
+	return 0;
+}
+
+/*
+ * Helpers for reading out temp/power values and calculating their
+ * averages for the decision making and monitoring functions.
+ */
+
+static u16 calc_avg_temp(struct ips_driver *ips, u16 *array)
+{
+	u64 total = 0;
+	int i;
+	u16 avg;
+
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++)
+		total += (u64)(array[i] * 100);
+
+	do_div(total, IPS_SAMPLE_COUNT);
+
+	avg = (u16)total;
+
+	return avg;
+}
+
+static u16 read_mgtv(struct ips_driver *ips)
+{
+	u16 ret;
+	u64 slope, offset;
+	u64 val;
+
+	val = thm_readq(THM_MGTV);
+	val = (val & TV_MASK) >> TV_SHIFT;
+
+	slope = offset = thm_readw(THM_MGTA);
+	slope = (slope & MGTA_SLOPE_MASK) >> MGTA_SLOPE_SHIFT;
+	offset = offset & MGTA_OFFSET_MASK;
+
+	ret = ((val * slope + 0x40) >> 7) + offset;
+
+	return 0; /* MCH temp reporting buggy */
+}
+
+static u16 read_ptv(struct ips_driver *ips)
+{
+	u16 val, slope, offset;
+
+	slope = (ips->pta_val & PTA_SLOPE_MASK) >> PTA_SLOPE_SHIFT;
+	offset = ips->pta_val & PTA_OFFSET_MASK;
+
+	val = thm_readw(THM_PTV) & PTV_MASK;
+
+	return val;
+}
+
+static u16 read_ctv(struct ips_driver *ips, int cpu)
+{
+	int reg = cpu ? THM_CTV2 : THM_CTV1;
+	u16 val;
+
+	val = thm_readw(reg);
+	if (!(val & CTV_TEMP_ERROR))
+		val = (val) >> 6; /* discard fractional component */
+	else
+		val = 0;
+
+	return val;
+}
+
+static u32 get_cpu_power(struct ips_driver *ips, u32 *last, int period)
+{
+	u32 val;
+	u32 ret;
+
+	/*
+	 * CEC is in joules/65535.  Take difference over time to
+	 * get watts.
+	 */
+	val = thm_readl(THM_CEC);
+
+	/* period is in ms and we want mW */
+	ret = (((val - *last) * 1000) / period);
+	ret = (ret * 1000) / 65535;
+	*last = val;
+
+	return ret;
+}
+
+static const u16 temp_decay_factor = 2;
+static u16 update_average_temp(u16 avg, u16 val)
+{
+	u16 ret;
+
+	/* Multiply by 100 for extra precision */
+	ret = (val * 100 / temp_decay_factor) +
+		(((temp_decay_factor - 1) * avg) / temp_decay_factor);
+	return ret;
+}
+
+static const u16 power_decay_factor = 2;
+static u16 update_average_power(u32 avg, u32 val)
+{
+	u32 ret;
+
+	ret = (val / power_decay_factor) +
+		(((power_decay_factor - 1) * avg) / power_decay_factor);
+
+	return ret;
+}
+
+static u32 calc_avg_power(struct ips_driver *ips, u32 *array)
+{
+	u64 total = 0;
+	u32 avg;
+	int i;
+
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++)
+		total += array[i];
+
+	do_div(total, IPS_SAMPLE_COUNT);
+	avg = (u32)total;
+
+	return avg;
+}
+
+static void monitor_timeout(unsigned long arg)
+{
+	wake_up_process((struct task_struct *)arg);
+}
+
+/**
+ * ips_monitor - temp/power monitoring thread
+ * @data: ips driver structure
+ *
+ * This is the main function for the IPS driver.  It monitors power and
+ * tempurature in the MCP and adjusts CPU and GPU power clams accordingly.
+ *
+ * We keep a 5s moving average of power consumption and tempurature.  Using
+ * that data, along with CPU vs GPU preference, we adjust the power clamps
+ * up or down.
+ */
+static int ips_monitor(void *data)
+{
+	struct ips_driver *ips = data;
+	struct timer_list timer;
+	unsigned long seqno_timestamp, expire, last_msecs, last_sample_period;
+	int i;
+	u32 *cpu_samples, *mchp_samples, old_cpu_power;
+	u16 *mcp_samples, *ctv1_samples, *ctv2_samples, *mch_samples;
+	u8 cur_seqno, last_seqno;
+
+	mcp_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	ctv1_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	ctv2_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	mch_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	cpu_samples = kzalloc(sizeof(u32) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	mchp_samples = kzalloc(sizeof(u32) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	if (!mcp_samples || !ctv1_samples || !ctv2_samples || !mch_samples ||
+			!cpu_samples || !mchp_samples) {
+		dev_err(&ips->dev->dev,
+			"failed to allocate sample array, ips disabled\n");
+		kfree(mcp_samples);
+		kfree(ctv1_samples);
+		kfree(ctv2_samples);
+		kfree(mch_samples);
+		kfree(cpu_samples);
+		kfree(mchp_samples);
+		kthread_stop(ips->adjust);
+		return -ENOMEM;
+	}
+
+	last_seqno = (thm_readl(THM_ITV) & ITV_ME_SEQNO_MASK) >>
+		ITV_ME_SEQNO_SHIFT;
+	seqno_timestamp = get_jiffies_64();
+
+	old_cpu_power = thm_readl(THM_CEC) / 65535;
+	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+
+	/* Collect an initial average */
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++) {
+		u32 mchp, cpu_power;
+		u16 val;
+
+		mcp_samples[i] = read_ptv(ips);
+
+		val = read_ctv(ips, 0);
+		ctv1_samples[i] = val;
+
+		val = read_ctv(ips, 1);
+		ctv2_samples[i] = val;
+
+		val = read_mgtv(ips);
+		mch_samples[i] = val;
+
+		cpu_power = get_cpu_power(ips, &old_cpu_power,
+					  IPS_SAMPLE_PERIOD);
+		cpu_samples[i] = cpu_power;
+
+		if (ips->read_mch_val) {
+			mchp = ips->read_mch_val();
+			mchp_samples[i] = mchp;
+		}
+
+		schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+		if (kthread_should_stop())
+			break;
+	}
+
+	ips->mcp_avg_temp = calc_avg_temp(ips, mcp_samples);
+	ips->ctv1_avg_temp = calc_avg_temp(ips, ctv1_samples);
+	ips->ctv2_avg_temp = calc_avg_temp(ips, ctv2_samples);
+	ips->mch_avg_temp = calc_avg_temp(ips, mch_samples);
+	ips->cpu_avg_power = calc_avg_power(ips, cpu_samples);
+	ips->mch_avg_power = calc_avg_power(ips, mchp_samples);
+	kfree(mcp_samples);
+	kfree(ctv1_samples);
+	kfree(ctv2_samples);
+	kfree(mch_samples);
+	kfree(cpu_samples);
+	kfree(mchp_samples);
+
+	/* Start the adjustment thread now that we have data */
+	wake_up_process(ips->adjust);
+
+	/*
+	 * Ok, now we have an initial avg.  From here on out, we track the
+	 * running avg using a decaying average calculation.  This allows
+	 * us to reduce the sample frequency if the CPU and GPU are idle.
+	 */
+	old_cpu_power = thm_readl(THM_CEC);
+	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+	last_sample_period = IPS_SAMPLE_PERIOD;
+
+	setup_deferrable_timer_on_stack(&timer, monitor_timeout,
+					(unsigned long)current);
+	do {
+		u32 cpu_val, mch_val;
+		u16 val;
+
+		/* MCP itself */
+		val = read_ptv(ips);
+		ips->mcp_avg_temp = update_average_temp(ips->mcp_avg_temp, val);
+
+		/* Processor 0 */
+		val = read_ctv(ips, 0);
+		ips->ctv1_avg_temp =
+			update_average_temp(ips->ctv1_avg_temp, val);
+		/* Power */
+		cpu_val = get_cpu_power(ips, &old_cpu_power,
+					last_sample_period);
+		ips->cpu_avg_power =
+			update_average_power(ips->cpu_avg_power, cpu_val);
+
+		if (ips->second_cpu) {
+			/* Processor 1 */
+			val = read_ctv(ips, 1);
+			ips->ctv2_avg_temp =
+				update_average_temp(ips->ctv2_avg_temp, val);
+		}
+
+		/* MCH */
+		val = read_mgtv(ips);
+		ips->mch_avg_temp = update_average_temp(ips->mch_avg_temp, val);
+		/* Power */
+		if (ips->read_mch_val) {
+			mch_val = ips->read_mch_val();
+			ips->mch_avg_power =
+				update_average_power(ips->mch_avg_power,
+						     mch_val);
+		}
+
+		/*
+		 * Make sure ME is updating thermal regs.
+		 * Note:
+		 * If it's been more than a second since the last update,
+		 * the ME is probably hung.
+		 */
+		cur_seqno = (thm_readl(THM_ITV) & ITV_ME_SEQNO_MASK) >>
+			ITV_ME_SEQNO_SHIFT;
+		if (cur_seqno == last_seqno &&
+		    time_after(jiffies, seqno_timestamp + HZ)) {
+			dev_warn(&ips->dev->dev, "ME failed to update for more than 1s, likely hung\n");
+		} else {
+			seqno_timestamp = get_jiffies_64();
+			last_seqno = cur_seqno;
+		}
+
+		last_msecs = jiffies_to_msecs(jiffies);
+		expire = jiffies + msecs_to_jiffies(IPS_SAMPLE_PERIOD);
+
+		__set_current_state(TASK_UNINTERRUPTIBLE);
+		mod_timer(&timer, expire);
+		schedule();
+
+		/* Calculate actual sample period for power averaging */
+		last_sample_period = jiffies_to_msecs(jiffies) - last_msecs;
+		if (!last_sample_period)
+			last_sample_period = 1;
+	} while (!kthread_should_stop());
+
+	del_timer_sync(&timer);
+	destroy_timer_on_stack(&timer);
+
+	dev_dbg(&ips->dev->dev, "ips-monitor thread stopped\n");
+
+	return 0;
+}
+
+#if 0
+#define THM_DUMPW(reg) \
+	{ \
+	u16 val = thm_readw(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%04x\n", val); \
+	}
+#define THM_DUMPL(reg) \
+	{ \
+	u32 val = thm_readl(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%08x\n", val); \
+	}
+#define THM_DUMPQ(reg) \
+	{ \
+	u64 val = thm_readq(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%016x\n", val); \
+	}
+
+static void dump_thermal_info(struct ips_driver *ips)
+{
+	u16 ptl;
+
+	ptl = thm_readw(THM_PTL);
+	dev_dbg(&ips->dev->dev, "Processor temp limit: %d\n", ptl);
+
+	THM_DUMPW(THM_CTA);
+	THM_DUMPW(THM_TRC);
+	THM_DUMPW(THM_CTV1);
+	THM_DUMPL(THM_STS);
+	THM_DUMPW(THM_PTV);
+	THM_DUMPQ(THM_MGTV);
+}
+#endif
+
+/**
+ * ips_irq_handler - handle temperature triggers and other IPS events
+ * @irq: irq number
+ * @arg: unused
+ *
+ * Handle temperature limit trigger events, generally by lowering the clamps.
+ * If we're at a critical limit, we clamp back to the lowest possible value
+ * to prevent emergency shutdown.
+ */
+static irqreturn_t ips_irq_handler(int irq, void *arg)
+{
+	struct ips_driver *ips = arg;
+	u8 tses = thm_readb(THM_TSES);
+	u8 tes = thm_readb(THM_TES);
+
+	if (!tses && !tes)
+		return IRQ_NONE;
+
+	dev_info(&ips->dev->dev, "TSES: 0x%02x\n", tses);
+	dev_info(&ips->dev->dev, "TES: 0x%02x\n", tes);
+
+	/* STS update from EC? */
+	if (tes & 1) {
+		u32 sts, tc1;
+
+		sts = thm_readl(THM_STS);
+		tc1 = thm_readl(THM_TC1);
+
+		if (sts & STS_NVV) {
+			spin_lock(&ips->turbo_status_lock);
+			ips->core_power_limit = (sts & STS_PCPL_MASK) >>
+				STS_PCPL_SHIFT;
+			ips->mch_power_limit = (sts & STS_GPL_MASK) >>
+				STS_GPL_SHIFT;
+			/* ignore EC CPU vs GPU pref */
+			ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
+			ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+			ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
+				STS_PTL_SHIFT;
+			ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
+				STS_PPL_SHIFT;
+			spin_unlock(&ips->turbo_status_lock);
+
+			thm_writeb(THM_SEC, SEC_ACK);
+		}
+		thm_writeb(THM_TES, tes);
+	}
+
+	/* Thermal trip */
+	if (tses) {
+		dev_warn(&ips->dev->dev,
+			 "thermal trip occurred, tses: 0x%04x\n", tses);
+		thm_writeb(THM_TSES, tses);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifndef CONFIG_DEBUG_FS
+static void ips_debugfs_init(struct ips_driver *ips) { return; }
+static void ips_debugfs_cleanup(struct ips_driver *ips) { return; }
+#else
+
+/* Expose current state and limits in debugfs if possible */
+
+struct ips_debugfs_node {
+	struct ips_driver *ips;
+	char *name;
+	int (*show)(struct seq_file *m, void *data);
+};
+
+static int show_cpu_temp(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%d.%02d\n", ips->ctv1_avg_temp / 100,
+		   ips->ctv1_avg_temp % 100);
+
+	return 0;
+}
+
+static int show_cpu_power(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%dmW\n", ips->cpu_avg_power);
+
+	return 0;
+}
+
+static int show_cpu_clamp(struct seq_file *m, void *data)
+{
+	u64 turbo_override;
+	int tdp, tdc;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	tdp = (int)(turbo_override & TURBO_TDP_MASK);
+	tdc = (int)((turbo_override & TURBO_TDC_MASK) >> TURBO_TDC_SHIFT);
+
+	/* Convert to .1W/A units */
+	tdp = tdp * 10 / 8;
+	tdc = tdc * 10 / 8;
+
+	/* Watts Amperes */
+	seq_printf(m, "%d.%dW %d.%dA\n", tdp / 10, tdp % 10,
+		   tdc / 10, tdc % 10);
+
+	return 0;
+}
+
+static int show_mch_temp(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%d.%02d\n", ips->mch_avg_temp / 100,
+		   ips->mch_avg_temp % 100);
+
+	return 0;
+}
+
+static int show_mch_power(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%dmW\n", ips->mch_avg_power);
+
+	return 0;
+}
+
+static struct ips_debugfs_node ips_debug_files[] = {
+	{ NULL, "cpu_temp", show_cpu_temp },
+	{ NULL, "cpu_power", show_cpu_power },
+	{ NULL, "cpu_clamp", show_cpu_clamp },
+	{ NULL, "mch_temp", show_mch_temp },
+	{ NULL, "mch_power", show_mch_power },
+};
+
+static int ips_debugfs_open(struct inode *inode, struct file *file)
+{
+	struct ips_debugfs_node *node = inode->i_private;
+
+	return single_open(file, node->show, node->ips);
+}
+
+static const struct file_operations ips_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open = ips_debugfs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void ips_debugfs_cleanup(struct ips_driver *ips)
+{
+	if (ips->debug_root)
+		debugfs_remove_recursive(ips->debug_root);
+	return;
+}
+
+static void ips_debugfs_init(struct ips_driver *ips)
+{
+	int i;
+
+	ips->debug_root = debugfs_create_dir("ips", NULL);
+	if (!ips->debug_root) {
+		dev_err(&ips->dev->dev,
+			"failed to create debugfs entries: %ld\n",
+			PTR_ERR(ips->debug_root));
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ips_debug_files); i++) {
+		struct dentry *ent;
+		struct ips_debugfs_node *node = &ips_debug_files[i];
+
+		node->ips = ips;
+		ent = debugfs_create_file(node->name, S_IFREG | S_IRUGO,
+					  ips->debug_root, node,
+					  &ips_debugfs_ops);
+		if (!ent) {
+			dev_err(&ips->dev->dev,
+				"failed to create debug file: %ld\n",
+				PTR_ERR(ent));
+			goto err_cleanup;
+		}
+	}
+
+	return;
+
+err_cleanup:
+	ips_debugfs_cleanup(ips);
+	return;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/**
+ * ips_detect_cpu - detect whether CPU supports IPS
+ *
+ * Walk our list and see if we're on a supported CPU.  If we find one,
+ * return the limits for it.
+ */
+static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips)
+{
+	u64 turbo_power, misc_en;
+	struct ips_mcp_limits *limits = NULL;
+	u16 tdp;
+
+	if (!(boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 37)) {
+		dev_info(&ips->dev->dev, "Non-IPS CPU detected.\n");
+		goto out;
+	}
+
+	rdmsrl(IA32_MISC_ENABLE, misc_en);
+	/*
+	 * If the turbo enable bit isn't set, we shouldn't try to enable/disable
+	 * turbo manually or we'll get an illegal MSR access, even though
+	 * turbo will still be available.
+	 */
+	if (!(misc_en & IA32_MISC_TURBO_EN))
+		; /* add turbo MSR write allowed flag if necessary */
+
+	if (strstr(boot_cpu_data.x86_model_id, "CPU       M"))
+		limits = &ips_sv_limits;
+	else if (strstr(boot_cpu_data.x86_model_id, "CPU       L"))
+		limits = &ips_lv_limits;
+	else if (strstr(boot_cpu_data.x86_model_id, "CPU       U"))
+		limits = &ips_ulv_limits;
+	else
+		dev_info(&ips->dev->dev, "No CPUID match found.\n");
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_power);
+	tdp = turbo_power & TURBO_TDP_MASK;
+
+	/* Sanity check TDP against CPU */
+	if (limits->mcp_power_limit != (tdp / 8) * 1000) {
+		dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
+			 tdp / 8, limits->mcp_power_limit / 1000);
+	}
+
+out:
+	return limits;
+}
+
+/**
+ * ips_get_i915_syms - try to get GPU control methods from i915 driver
+ * @ips: IPS driver
+ *
+ * The i915 driver exports several interfaces to allow the IPS driver to
+ * monitor and control graphics turbo mode.  If we can find them, we can
+ * enable graphics turbo, otherwise we must disable it to avoid exceeding
+ * thermal and power limits in the MCP.
+ */
+static bool ips_get_i915_syms(struct ips_driver *ips)
+{
+	ips->read_mch_val = symbol_get(i915_read_mch_val);
+	if (!ips->read_mch_val)
+		goto out_err;
+	ips->gpu_raise = symbol_get(i915_gpu_raise);
+	if (!ips->gpu_raise)
+		goto out_put_mch;
+	ips->gpu_lower = symbol_get(i915_gpu_lower);
+	if (!ips->gpu_lower)
+		goto out_put_raise;
+	ips->gpu_busy = symbol_get(i915_gpu_busy);
+	if (!ips->gpu_busy)
+		goto out_put_lower;
+	ips->gpu_turbo_disable = symbol_get(i915_gpu_turbo_disable);
+	if (!ips->gpu_turbo_disable)
+		goto out_put_busy;
+
+	return true;
+
+out_put_busy:
+	symbol_put(i915_gpu_turbo_disable);
+out_put_lower:
+	symbol_put(i915_gpu_lower);
+out_put_raise:
+	symbol_put(i915_gpu_raise);
+out_put_mch:
+	symbol_put(i915_read_mch_val);
+out_err:
+	return false;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+		     PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ips_id_table);
+
+static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u64 platform_info;
+	struct ips_driver *ips;
+	u32 hts;
+	int ret = 0;
+	u16 htshi, trc, trc_required_mask;
+	u8 tse;
+
+	ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL);
+	if (!ips)
+		return -ENOMEM;
+
+	pci_set_drvdata(dev, ips);
+	ips->dev = dev;
+
+	ips->limits = ips_detect_cpu(ips);
+	if (!ips->limits) {
+		dev_info(&dev->dev, "IPS not supported on this CPU\n");
+		ret = -ENXIO;
+		goto error_free;
+	}
+
+	spin_lock_init(&ips->turbo_status_lock);
+
+	if (!pci_resource_start(dev, 0)) {
+		dev_err(&dev->dev, "TBAR not assigned, aborting\n");
+		ret = -ENXIO;
+		goto error_free;
+	}
+
+	ret = pci_request_regions(dev, "ips thermal sensor");
+	if (ret) {
+		dev_err(&dev->dev, "thermal resource busy, aborting\n");
+		goto error_free;
+	}
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(&dev->dev, "can't enable PCI device, aborting\n");
+		goto error_free;
+	}
+
+	ips->regmap = ioremap(pci_resource_start(dev, 0),
+			      pci_resource_len(dev, 0));
+	if (!ips->regmap) {
+		dev_err(&dev->dev, "failed to map thermal regs, aborting\n");
+		ret = -EBUSY;
+		goto error_release;
+	}
+
+	tse = thm_readb(THM_TSE);
+	if (tse != TSE_EN) {
+		dev_err(&dev->dev, "thermal device not enabled (0x%02x), aborting\n", tse);
+		ret = -ENXIO;
+		goto error_unmap;
+	}
+
+	trc = thm_readw(THM_TRC);
+	trc_required_mask = TRC_CORE1_EN | TRC_CORE_PWR | TRC_MCH_EN;
+	if ((trc & trc_required_mask) != trc_required_mask) {
+		dev_err(&dev->dev, "thermal reporting for required devices not enabled, aborting\n");
+		ret = -ENXIO;
+		goto error_unmap;
+	}
+
+	if (trc & TRC_CORE2_EN)
+		ips->second_cpu = true;
+
+	update_turbo_limits(ips);
+	dev_dbg(&dev->dev, "max cpu power clamp: %dW\n",
+		ips->mcp_power_limit / 10);
+	dev_dbg(&dev->dev, "max core power clamp: %dW\n",
+		ips->core_power_limit / 10);
+	/* BIOS may update limits at runtime */
+	if (thm_readl(THM_PSC) & PSP_PBRT)
+		ips->poll_turbo_status = true;
+
+	if (!ips_get_i915_syms(ips)) {
+		dev_err(&dev->dev, "failed to get i915 symbols, graphics turbo disabled\n");
+		ips->gpu_turbo_enabled = false;
+	} else {
+		dev_dbg(&dev->dev, "graphics turbo enabled\n");
+		ips->gpu_turbo_enabled = true;
+	}
+
+	/*
+	 * Check PLATFORM_INFO MSR to make sure this chip is
+	 * turbo capable.
+	 */
+	rdmsrl(PLATFORM_INFO, platform_info);
+	if (!(platform_info & PLATFORM_TDP)) {
+		dev_err(&dev->dev, "platform indicates TDP override unavailable, aborting\n");
+		ret = -ENODEV;
+		goto error_unmap;
+	}
+
+	/*
+	 * IRQ handler for ME interaction
+	 * Note: don't use MSI here as the PCH has bugs.
+	 */
+	pci_disable_msi(dev);
+	ret = request_irq(dev->irq, ips_irq_handler, IRQF_SHARED, "ips",
+			  ips);
+	if (ret) {
+		dev_err(&dev->dev, "request irq failed, aborting\n");
+		goto error_unmap;
+	}
+
+	/* Enable aux, hot & critical interrupts */
+	thm_writeb(THM_TSPIEN, TSPIEN_AUX2_LOHI | TSPIEN_CRIT_LOHI |
+		   TSPIEN_HOT_LOHI | TSPIEN_AUX_LOHI);
+	thm_writeb(THM_TEN, TEN_UPDATE_EN);
+
+	/* Collect adjustment values */
+	ips->cta_val = thm_readw(THM_CTA);
+	ips->pta_val = thm_readw(THM_PTA);
+	ips->mgta_val = thm_readw(THM_MGTA);
+
+	/* Save turbo limits & ratios */
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
+
+	ips_enable_cpu_turbo(ips);
+	ips->cpu_turbo_enabled = true;
+
+	/* Set up the work queue and monitor/adjust threads */
+	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+	if (IS_ERR(ips->monitor)) {
+		dev_err(&dev->dev,
+			"failed to create thermal monitor thread, aborting\n");
+		ret = -ENOMEM;
+		goto error_free_irq;
+	}
+
+	ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
+	if (IS_ERR(ips->adjust)) {
+		dev_err(&dev->dev,
+			"failed to create thermal adjust thread, aborting\n");
+		ret = -ENOMEM;
+		goto error_thread_cleanup;
+	}
+
+	hts = (ips->core_power_limit << HTS_PCPL_SHIFT) |
+		(ips->mcp_temp_limit << HTS_PTL_SHIFT) | HTS_NVV;
+	htshi = HTS2_PRST_RUNNING << HTS2_PRST_SHIFT;
+
+	thm_writew(THM_HTSHI, htshi);
+	thm_writel(THM_HTS, hts);
+
+	ips_debugfs_init(ips);
+
+	dev_info(&dev->dev, "IPS driver initialized, MCP temp limit %d\n",
+		 ips->mcp_temp_limit);
+	return ret;
+
+error_thread_cleanup:
+	kthread_stop(ips->monitor);
+error_free_irq:
+	free_irq(ips->dev->irq, ips);
+error_unmap:
+	iounmap(ips->regmap);
+error_release:
+	pci_release_regions(dev);
+error_free:
+	kfree(ips);
+	return ret;
+}
+
+static void ips_remove(struct pci_dev *dev)
+{
+	struct ips_driver *ips = pci_get_drvdata(dev);
+	u64 turbo_override;
+
+	if (!ips)
+		return;
+
+	ips_debugfs_cleanup(ips);
+
+	/* Release i915 driver */
+	if (ips->read_mch_val)
+		symbol_put(i915_read_mch_val);
+	if (ips->gpu_raise)
+		symbol_put(i915_gpu_raise);
+	if (ips->gpu_lower)
+		symbol_put(i915_gpu_lower);
+	if (ips->gpu_busy)
+		symbol_put(i915_gpu_busy);
+	if (ips->gpu_turbo_disable)
+		symbol_put(i915_gpu_turbo_disable);
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+	turbo_override &= ~(TURBO_TDC_OVR_EN | TURBO_TDP_OVR_EN);
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
+
+	free_irq(ips->dev->irq, ips);
+	if (ips->adjust)
+		kthread_stop(ips->adjust);
+	if (ips->monitor)
+		kthread_stop(ips->monitor);
+	iounmap(ips->regmap);
+	pci_release_regions(dev);
+	kfree(ips);
+	dev_dbg(&dev->dev, "IPS driver removed\n");
+}
+
+#ifdef CONFIG_PM
+static int ips_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	return 0;
+}
+
+static int ips_resume(struct pci_dev *dev)
+{
+	return 0;
+}
+#else
+#define ips_suspend NULL
+#define ips_resume NULL
+#endif /* CONFIG_PM */
+
+static void ips_shutdown(struct pci_dev *dev)
+{
+}
+
+static struct pci_driver ips_pci_driver = {
+	.name = "intel ips",
+	.id_table = ips_id_table,
+	.probe = ips_probe,
+	.remove = ips_remove,
+	.suspend = ips_suspend,
+	.resume = ips_resume,
+	.shutdown = ips_shutdown,
+};
+
+static int __init ips_init(void)
+{
+	return pci_register_driver(&ips_pci_driver);
+}
+module_init(ips_init);
+
+static void ips_exit(void)
+{
+	pci_unregister_driver(&ips_pci_driver);
+	return;
+}
+module_exit(ips_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jesse Barnes <jbarnes@virtuousgeek.org>");
+MODULE_DESCRIPTION("Intelligent Power Sharing Driver");
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index 2f795ce2b93..eacd5da7dd2 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -53,6 +53,8 @@ MODULE_LICENSE("GPL");
 #define MEMORY_ARG_CUR_BANDWIDTH 1
 #define MEMORY_ARG_MAX_BANDWIDTH 0
 
+static void intel_menlow_unregister_sensor(void);
+
 /*
  * GTHS returning 'n' would mean that [0,n-1] states are supported
  * In that case max_cstate would be n-1
@@ -406,8 +408,10 @@ static int intel_menlow_add_one_attribute(char *name, int mode, void *show,
 	attr->handle = handle;
 
 	result = device_create_file(dev, &attr->attr);
-	if (result)
+	if (result) {
+		kfree(attr);
 		return result;
+	}
 
 	mutex_lock(&intel_menlow_attr_lock);
 	list_add_tail(&attr->node, &intel_menlow_attr_list);
@@ -431,11 +435,11 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 	/* _TZ must have the AUX0/1 methods */
 	status = acpi_get_handle(handle, GET_AUX0, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
 
 	status = acpi_get_handle(handle, SET_AUX0, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
 
 	result = intel_menlow_add_one_attribute("aux0", 0644,
 						aux0_show, aux0_store,
@@ -445,17 +449,19 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 
 	status = acpi_get_handle(handle, GET_AUX1, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		goto aux1_not_found;
 
 	status = acpi_get_handle(handle, SET_AUX1, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		goto aux1_not_found;
 
 	result = intel_menlow_add_one_attribute("aux1", 0644,
 						aux1_show, aux1_store,
 						&thermal->device, handle);
-	if (result)
+	if (result) {
+		intel_menlow_unregister_sensor();
 		return AE_ERROR;
+	}
 
 	/*
 	 * create the "dabney_enabled" attribute which means the user app
@@ -465,14 +471,17 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 	result = intel_menlow_add_one_attribute("bios_enabled", 0444,
 						bios_enabled_show, NULL,
 						&thermal->device, handle);
-	if (result)
+	if (result) {
+		intel_menlow_unregister_sensor();
 		return AE_ERROR;
+	}
 
- not_found:
+ aux1_not_found:
 	if (status == AE_NOT_FOUND)
 		return AE_OK;
-	else
-		return status;
+
+	intel_menlow_unregister_sensor();
+	return status;
 }
 
 static void intel_menlow_unregister_sensor(void)
@@ -513,8 +522,10 @@ static int __init intel_menlow_module_init(void)
 	status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
 				     ACPI_UINT32_MAX,
 				     intel_menlow_register_sensor, NULL, NULL, NULL);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(status)) {
+		acpi_bus_unregister_driver(&intel_menlow_memory_driver);
 		return -ENODEV;
+	}
 
 	return 0;
 }
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
new file mode 100644
index 00000000000..5cdcff65391
--- /dev/null
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -0,0 +1,340 @@
+/* Moorestown PMIC GPIO (access through IPC) driver
+ * Copyright (c) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Moorestown platform PMIC chip
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <asm/intel_scu_ipc.h>
+#include <linux/device.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "pmic_gpio"
+
+/* register offset that IPC driver should use
+ * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO
+ */
+enum pmic_gpio_register {
+	GPIO0		= 0xE0,
+	GPIO7		= 0xE7,
+	GPIOINT		= 0xE8,
+	GPOSWCTL0	= 0xEC,
+	GPOSWCTL5	= 0xF1,
+	GPO		= 0xF4,
+};
+
+/* bits definition for GPIO & GPOSW */
+#define GPIO_DRV 0x01
+#define GPIO_DIR 0x02
+#define GPIO_DIN 0x04
+#define GPIO_DOU 0x08
+#define GPIO_INTCTL 0x30
+#define GPIO_DBC 0xc0
+
+#define GPOSW_DRV 0x01
+#define GPOSW_DOU 0x08
+#define GPOSW_RDRV 0x30
+
+
+#define NUM_GPIO 24
+
+struct pmic_gpio_irq {
+	spinlock_t lock;
+	u32 trigger[NUM_GPIO];
+	u32 dirty;
+	struct work_struct work;
+};
+
+
+struct pmic_gpio {
+	struct gpio_chip	chip;
+	struct pmic_gpio_irq	irqtypes;
+	void			*gpiointr;
+	int			irq;
+	unsigned		irq_base;
+};
+
+static void pmic_program_irqtype(int gpio, int type)
+{
+	if (type & IRQ_TYPE_EDGE_RISING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
+};
+
+static void pmic_irqtype_work(struct work_struct *work)
+{
+	struct pmic_gpio_irq *t =
+		container_of(work, struct pmic_gpio_irq, work);
+	unsigned long flags;
+	int i;
+	u16 type;
+
+	spin_lock_irqsave(&t->lock, flags);
+	/* As we drop the lock, we may need multiple scans if we race the
+	   pmic_irq_type function */
+	while (t->dirty) {
+		/*
+		 *	For each pin that has the dirty bit set send an IPC
+		 *	message to configure the hardware via the PMIC
+		 */
+		for (i = 0; i < NUM_GPIO; i++) {
+			if (!(t->dirty & (1 << i)))
+				continue;
+			t->dirty &= ~(1 << i);
+			/* We can't trust the array entry or dirty
+			   once the lock is dropped */
+			type = t->trigger[i];
+			spin_unlock_irqrestore(&t->lock, flags);
+			pmic_program_irqtype(i, type);
+			spin_lock_irqsave(&t->lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&t->lock, flags);
+}
+
+static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset > 8) {
+		printk(KERN_ERR
+			"%s: only pin 0-7 support input\n", __func__);
+		return -1;/* we only have 8 GPIO can use as input */
+	}
+	return intel_scu_ipc_update_register(GPIO0 + offset,
+							GPIO_DIR, GPIO_DIR);
+}
+
+static int pmic_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	int rc = 0;
+
+	if (offset < 8)/* it is GPIO */
+		rc = intel_scu_ipc_update_register(GPIO0 + offset,
+				GPIO_DRV | GPIO_DOU | GPIO_DIR,
+				GPIO_DRV | (value ? GPIO_DOU : 0));
+	else if (offset < 16)/* it is GPOSW */
+		rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
+				GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV,
+				GPOSW_DRV | (value ? GPOSW_DOU : 0));
+	else if (offset > 15 && offset < 24)/* it is GPO */
+		rc = intel_scu_ipc_update_register(GPO,
+				1 << (offset - 16),
+				value ? 1 << (offset - 16) : 0);
+	else {
+		printk(KERN_ERR
+			"%s: invalid PMIC GPIO pin %d!\n", __func__, offset);
+		WARN_ON(1);
+	}
+
+	return rc;
+}
+
+static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	u8 r;
+	int ret;
+
+	/* we only have 8 GPIO pins we can use as input */
+	if (offset > 8)
+		return -EOPNOTSUPP;
+	ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r);
+	if (ret < 0)
+		return ret;
+	return r & GPIO_DIN;
+}
+
+static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 8)/* it is GPIO */
+		intel_scu_ipc_update_register(GPIO0 + offset,
+			GPIO_DRV | GPIO_DOU,
+			GPIO_DRV | (value ? GPIO_DOU : 0));
+	else if (offset < 16)/* it is GPOSW */
+		intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
+			GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV,
+			GPOSW_DRV | (value ? GPOSW_DOU : 0));
+	else if (offset > 15 && offset < 24) /* it is GPO */
+		intel_scu_ipc_update_register(GPO,
+			1 << (offset - 16),
+			value ? 1 << (offset - 16) : 0);
+}
+
+static int pmic_irq_type(unsigned irq, unsigned type)
+{
+	struct pmic_gpio *pg = get_irq_chip_data(irq);
+	u32 gpio = irq - pg->irq_base;
+	unsigned long flags;
+
+	if (gpio > pg->chip.ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&pg->irqtypes.lock, flags);
+	pg->irqtypes.trigger[gpio] = type;
+	pg->irqtypes.dirty |=  (1 << gpio);
+	spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
+	schedule_work(&pg->irqtypes.work);
+	return 0;
+}
+
+
+
+static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
+
+	return pg->irq_base + offset;
+}
+
+/* the gpiointr register is read-clear, so just do nothing. */
+static void pmic_irq_unmask(unsigned irq)
+{
+};
+
+static void pmic_irq_mask(unsigned irq)
+{
+};
+
+static struct irq_chip pmic_irqchip = {
+	.name		= "PMIC-GPIO",
+	.mask		= pmic_irq_mask,
+	.unmask		= pmic_irq_unmask,
+	.set_type	= pmic_irq_type,
+};
+
+static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+	u8 intsts = *((u8 *)pg->gpiointr + 4);
+	int gpio;
+
+	for (gpio = 0; gpio < 8; gpio++) {
+		if (intsts & (1 << gpio)) {
+			pr_debug("pmic pin %d triggered\n", gpio);
+			generic_handle_irq(pg->irq_base + gpio);
+		}
+	}
+	desc->chip->eoi(irq);
+}
+
+static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int irq = platform_get_irq(pdev, 0);
+	struct intel_pmic_gpio_platform_data *pdata = dev->platform_data;
+
+	struct pmic_gpio *pg;
+	int retval;
+	int i;
+
+	if (irq < 0) {
+		dev_dbg(dev, "no IRQ line\n");
+		return -EINVAL;
+	}
+
+	if (!pdata || !pdata->gpio_base || !pdata->irq_base) {
+		dev_dbg(dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
+
+	pg = kzalloc(sizeof(*pg), GFP_KERNEL);
+	if (!pg)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, pg);
+
+	pg->irq = irq;
+	/* setting up SRAM mapping for GPIOINT register */
+	pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
+	if (!pg->gpiointr) {
+		printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__);
+		retval = -EINVAL;
+		goto err2;
+	}
+	pg->irq_base = pdata->irq_base;
+	pg->chip.label = "intel_pmic";
+	pg->chip.direction_input = pmic_gpio_direction_input;
+	pg->chip.direction_output = pmic_gpio_direction_output;
+	pg->chip.get = pmic_gpio_get;
+	pg->chip.set = pmic_gpio_set;
+	pg->chip.to_irq = pmic_gpio_to_irq;
+	pg->chip.base = pdata->gpio_base;
+	pg->chip.ngpio = NUM_GPIO;
+	pg->chip.can_sleep = 1;
+	pg->chip.dev = dev;
+
+	INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
+	spin_lock_init(&pg->irqtypes.lock);
+
+	pg->chip.dev = dev;
+	retval = gpiochip_add(&pg->chip);
+	if (retval) {
+		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
+		goto err;
+	}
+	set_irq_data(pg->irq, pg);
+	set_irq_chained_handler(pg->irq, pmic_irq_handler);
+	for (i = 0; i < 8; i++) {
+		set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
+					handle_simple_irq, "demux");
+		set_irq_chip_data(i + pg->irq_base, pg);
+	}
+	return 0;
+err:
+	iounmap(pg->gpiointr);
+err2:
+	kfree(pg);
+	return retval;
+}
+
+/* at the same time, register a platform driver
+ * this supports the sfi 0.81 fw */
+static struct platform_driver platform_pmic_gpio_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= platform_pmic_gpio_probe,
+};
+
+static int __init platform_pmic_gpio_init(void)
+{
+	return platform_driver_register(&platform_pmic_gpio_driver);
+}
+
+subsys_initcall(platform_pmic_gpio_init);
+
+MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
+MODULE_DESCRIPTION("Intel Moorestown PMIC GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/rar_register/rar_register.c b/drivers/platform/x86/intel_rar_register.c
index 618503f422e..73f8e6d7266 100644
--- a/drivers/staging/rar_register/rar_register.c
+++ b/drivers/platform/x86/intel_rar_register.c
@@ -40,15 +40,12 @@
  *      Initial publish
  */
 
-#define DEBUG 1
-
-#include "rar_register.h"
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/rar_register.h>
 
 /* === Lincroft Message Bus Interface === */
 #define LNC_MCR_OFFSET		0xD0	/* Message Control Register */
@@ -155,7 +152,6 @@ static struct rar_device *_rar_to_device(int rar, int *off)
 	return NULL;
 }
 
-
 /**
  *	rar_to_device		-	return the device handling this RAR
  *	@rar: RAR number
@@ -496,7 +492,7 @@ EXPORT_SYMBOL(rar_lock);
  *	a driver that do require a valid RAR address. One of those
  *	steps would be to call rar_get_address()
  *
- *	This function return 0 on success an error code on failure.
+ *	This function return 0 on success or an error code on failure.
  */
 int register_rar(int num, int (*callback)(unsigned long data),
 							unsigned long data)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 576c3ed9243..943f9084dcb 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -23,7 +23,7 @@
 #include <linux/pm.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <asm/setup.h>
+#include <asm/mrst.h>
 #include <asm/intel_scu_ipc.h>
 
 /* IPC defines the following message types */
@@ -38,10 +38,6 @@
 #define IPC_CMD_PCNTRL_R      1 /* Register read */
 #define IPC_CMD_PCNTRL_M      2 /* Register read-modify-write */
 
-/* Miscelaneous Command ids */
-#define IPC_CMD_INDIRECT_RD   2 /* 32bit indirect read */
-#define IPC_CMD_INDIRECT_WR   5 /* 32bit indirect write */
-
 /*
  * IPC register summary
  *
@@ -62,8 +58,8 @@
 
 #define IPC_BASE_ADDR     0xFF11C000	/* IPC1 base register address */
 #define IPC_MAX_ADDR      0x100		/* Maximum IPC regisers */
-#define IPC_WWBUF_SIZE    16		/* IPC Write buffer Size */
-#define IPC_RWBUF_SIZE    16		/* IPC Read buffer Size */
+#define IPC_WWBUF_SIZE    20		/* IPC Write buffer Size */
+#define IPC_RWBUF_SIZE    20		/* IPC Read buffer Size */
 #define IPC_I2C_BASE      0xFF12B000	/* I2C control register base address */
 #define IPC_I2C_MAX_ADDR  0x10		/* Maximum I2C regisers */
 
@@ -78,12 +74,7 @@ struct intel_scu_ipc_dev {
 
 static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
 
-static int platform = 1;
-module_param(platform, int, 0);
-MODULE_PARM_DESC(platform, "1 for moorestown platform");
-
-
-
+static int platform;		/* Platform type */
 
 /*
  * IPC Read Buffer (Read Only):
@@ -119,24 +110,6 @@ static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
 }
 
 /*
- * IPC destination Pointer (Write Only):
- * Use content as pointer for destination write
- */
-static inline void ipc_write_dptr(u32 data) /* Write dptr data */
-{
-	writel(data, ipcdev.ipc_base + 0x0C);
-}
-
-/*
- * IPC Source Pointer (Write Only):
- * Use content as pointer for read location
-*/
-static inline void ipc_write_sptr(u32 data) /* Write dptr data */
-{
-	writel(data, ipcdev.ipc_base + 0x08);
-}
-
-/*
  * Status Register (Read Only):
  * Driver will read this register to get the ready/busy status of the IPC
  * block and error status of the IPC command that was just processed by SCU
@@ -154,7 +127,7 @@ static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
 	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
 }
 
-static inline u8 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
 {
 	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
 }
@@ -175,62 +148,73 @@ static inline int busy_loop(void) /* Wait till scu status is busy */
 			return -ETIMEDOUT;
 		}
 	}
-	return (status >> 1) & 1;
+	if ((status >> 1) & 1)
+		return -EIO;
+
+	return 0;
 }
 
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
 static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 {
-	int nc;
+	int i, nc, bytes, d;
 	u32 offset = 0;
 	u32 err = 0;
-	u8 cbuf[IPC_WWBUF_SIZE] = { '\0' };
+	u8 cbuf[IPC_WWBUF_SIZE] = { };
 	u32 *wbuf = (u32 *)&cbuf;
 
 	mutex_lock(&ipclock);
+
+	memset(cbuf, 0, sizeof(cbuf));
+
 	if (ipcdev.pdev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 
-	if (platform == 1) {
-		/* Entry is 4 bytes for read/write, 5 bytes for read modify */
-		for (nc = 0; nc < count; nc++) {
+	if (platform != MRST_CPU_CHIP_PENWELL) {
+		bytes = 0;
+		d = 0;
+		for (i = 0; i < count; i++) {
+			cbuf[bytes++] = addr[i];
+			cbuf[bytes++] = addr[i] >> 8;
+			if (id != IPC_CMD_PCNTRL_R)
+				cbuf[bytes++] = data[d++];
+			if (id == IPC_CMD_PCNTRL_M)
+				cbuf[bytes++] = data[d++];
+		}
+		for (i = 0; i < bytes; i += 4)
+			ipc_data_writel(wbuf[i/4], i);
+		ipc_command(bytes << 16 |  id << 12 | 0 << 8 | op);
+	} else {
+		for (nc = 0; nc < count; nc++, offset += 2) {
 			cbuf[offset] = addr[nc];
 			cbuf[offset + 1] = addr[nc] >> 8;
-			if (id != IPC_CMD_PCNTRL_R)
-				cbuf[offset + 2] = data[nc];
-			if (id == IPC_CMD_PCNTRL_M) {
-				cbuf[offset + 3] = data[nc + 1];
-				offset += 1;
-			}
-			offset += 3;
 		}
-		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset); /* Write wbuff */
 
-	} else {
-		for (nc = 0, offset = 0; nc < count; nc++, offset += 2)
-			ipc_data_writel(addr[nc], offset); /* Write addresses */
-		if (id != IPC_CMD_PCNTRL_R) {
-			for (nc = 0; nc < count; nc++, offset++)
-				ipc_data_writel(data[nc], offset); /* Write data */
-			if (id == IPC_CMD_PCNTRL_M)
-				ipc_data_writel(data[nc + 1], offset); /* Mask value*/
+		if (id == IPC_CMD_PCNTRL_R) {
+			for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+				ipc_data_writel(wbuf[nc], offset);
+			ipc_command((count*2) << 16 |  id << 12 | 0 << 8 | op);
+		} else if (id == IPC_CMD_PCNTRL_W) {
+			for (nc = 0; nc < count; nc++, offset += 1)
+				cbuf[offset] = data[nc];
+			for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+				ipc_data_writel(wbuf[nc], offset);
+			ipc_command((count*3) << 16 |  id << 12 | 0 << 8 | op);
+		} else if (id == IPC_CMD_PCNTRL_M) {
+			cbuf[offset] = data[0];
+			cbuf[offset + 1] = data[1];
+			ipc_data_writel(wbuf[0], 0); /* Write wbuff */
+			ipc_command(4 << 16 |  id << 12 | 0 << 8 | op);
 		}
 	}
 
-	if (id != IPC_CMD_PCNTRL_M)
-		ipc_command((count * 3) << 16 |  id << 12 | 0 << 8 | op);
-	else
-		ipc_command((count * 4) << 16 |  id << 12 | 0 << 8 | op);
-
 	err = busy_loop();
-
 	if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
 		/* Workaround: values are read as 0 without memcpy_fromio */
-		memcpy_fromio(cbuf, ipcdev.ipc_base + IPC_READ_BUFFER, 16);
-		if (platform == 1) {
+		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+		if (platform != MRST_CPU_CHIP_PENWELL) {
 			for (nc = 0, offset = 2; nc < count; nc++, offset += 3)
 				data[nc] = ipc_data_readb(offset);
 		} else {
@@ -405,70 +389,6 @@ int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
 EXPORT_SYMBOL(intel_scu_ipc_update_register);
 
 /**
- *	intel_scu_ipc_register_read	-	32bit indirect read
- *	@addr: register address
- *	@value: 32bit value return
- *
- *	Performs IA 32 bit indirect read, returns 0 on success, or an
- *	error code.
- *
- *	Can be used when SCCB(System Controller Configuration Block) register
- *	HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- *	This function may sleep. Locking for SCU accesses is handled for
- *	the caller.
- */
-int intel_scu_ipc_register_read(u32 addr, u32 *value)
-{
-	u32 err = 0;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	ipc_write_sptr(addr);
-	ipc_command(4 << 16 | IPC_CMD_INDIRECT_RD);
-	err = busy_loop();
-	*value = ipc_data_readl(0);
-	mutex_unlock(&ipclock);
-	return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_read);
-
-/**
- *	intel_scu_ipc_register_write	-	32bit indirect write
- *	@addr: register address
- *	@value: 32bit value to write
- *
- *	Performs IA 32 bit indirect write, returns 0 on success, or an
- *	error code.
- *
- *	Can be used when SCCB(System Controller Configuration Block) register
- *	HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- *	This function may sleep. Locking for SCU accesses is handled for
- *	the caller.
- */
-int intel_scu_ipc_register_write(u32 addr, u32 value)
-{
-	u32 err = 0;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	ipc_write_dptr(addr);
-	ipc_data_writel(value, 0);
-	ipc_command(4 << 16 | IPC_CMD_INDIRECT_WR);
-	err = busy_loop();
-	mutex_unlock(&ipclock);
-	return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_write);
-
-/**
  *	intel_scu_ipc_simple_command	-	send a simple command
  *	@cmd: command
  *	@sub: sub type
@@ -489,7 +409,7 @@ int intel_scu_ipc_simple_command(int cmd, int sub)
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
-	ipc_command(cmd << 12 | sub);
+	ipc_command(sub << 12 | cmd);
 	err = busy_loop();
 	mutex_unlock(&ipclock);
 	return err;
@@ -501,9 +421,9 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
  *	@cmd: command
  *	@sub: sub type
  *	@in: input data
- *	@inlen: input length
+ *	@inlen: input length in dwords
  *	@out: output data
- *	@outlein: output length
+ *	@outlein: output length in dwords
  *
  *	Issue a command to the SCU which involves data transfers. Do the
  *	data copies under the lock but leave it for the caller to interpret
@@ -524,7 +444,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
 	for (i = 0; i < inlen; i++)
 		ipc_data_writel(*in++, 4 * i);
 
-	ipc_command(cmd << 12 | sub);
+	ipc_command((inlen << 16) | (sub << 12) | cmd);
 	err = busy_loop();
 
 	for (i = 0; i < outlen; i++)
@@ -556,6 +476,10 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
 	u32 cmd = 0;
 
 	mutex_lock(&ipclock);
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
 	cmd = (addr >> 24) & 0xFF;
 	if (cmd == IPC_I2C_READ) {
 		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
@@ -799,6 +723,7 @@ static void ipc_remove(struct pci_dev *pdev)
 
 static const struct pci_device_id pci_ids[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);
@@ -813,6 +738,9 @@ static struct pci_driver ipc_driver = {
 
 static int __init intel_scu_ipc_init(void)
 {
+	platform = mrst_identify_cpu();
+	if (platform == 0)
+		return -ENODEV;
 	return  pci_register_driver(&ipc_driver);
 }
 
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index afd762b58ad..7e9bb6df9d3 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -434,7 +434,7 @@ static int dmi_check_cb(const struct dmi_system_id *id)
 {
 	printk(KERN_INFO "msi-laptop: Identified laptop model '%s'.\n",
 	       id->ident);
-	return 0;
+	return 1;
 }
 
 static struct dmi_system_id __initdata msi_dmi_table[] = {
@@ -562,15 +562,15 @@ static int rfkill_threeg_set(void *data, bool blocked)
 	return 0;
 }
 
-static struct rfkill_ops rfkill_bluetooth_ops = {
+static const struct rfkill_ops rfkill_bluetooth_ops = {
 	.set_block = rfkill_bluetooth_set
 };
 
-static struct rfkill_ops rfkill_wlan_ops = {
+static const struct rfkill_ops rfkill_wlan_ops = {
 	.set_block = rfkill_wlan_set
 };
 
-static struct rfkill_ops rfkill_threeg_ops = {
+static const struct rfkill_ops rfkill_threeg_ops = {
 	.set_block = rfkill_threeg_set
 };
 
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index d1736009636..42a5469a245 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -57,7 +57,7 @@ static struct key_entry msi_wmi_keymap[] = {
 };
 static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
 
-struct backlight_device *backlight;
+static struct backlight_device *backlight;
 
 static int backlight_map[] = { 0x00, 0x33, 0x66, 0x99, 0xCC, 0xFF };
 
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 2fb9a32926f..ec01c3d8fc5 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -248,7 +248,7 @@ static int acpi_pcc_write_sset(struct pcc_acpi *pcc, int func, int val)
 	status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SSET,
 				      &params, NULL);
 
-	return status == AE_OK;
+	return (status == AE_OK) ? 0 : -EIO;
 }
 
 static inline int acpi_pcc_get_sqty(struct acpi_device *device)
@@ -586,7 +586,6 @@ static int acpi_pcc_init_input(struct pcc_acpi *pcc)
 static int acpi_pcc_hotkey_resume(struct acpi_device *device)
 {
 	struct pcc_acpi *pcc = acpi_driver_data(device);
-	acpi_status status = AE_OK;
 
 	if (device == NULL || pcc == NULL)
 		return -EINVAL;
@@ -594,9 +593,7 @@ static int acpi_pcc_hotkey_resume(struct acpi_device *device)
 	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Sticky mode restore: %d\n",
 			  pcc->sticky_mode));
 
-	status = acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode);
-
-	return status == AE_OK ? 0 : -EINVAL;
+	return acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode);
 }
 
 static int acpi_pcc_hotkey_add(struct acpi_device *device)
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 1387c5f9c24..e3154ff7a39 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -561,8 +561,7 @@ static void sony_pf_remove(void)
 	if (!atomic_dec_and_test(&sony_pf_users))
 		return;
 
-	platform_device_del(sony_pf_device);
-	platform_device_put(sony_pf_device);
+	platform_device_unregister(sony_pf_device);
 	platform_driver_unregister(&sony_pf_driver);
 }
 
@@ -1196,9 +1195,13 @@ static void sony_nc_rfkill_setup(struct acpi_device *device)
 	}
 
 	device_enum = (union acpi_object *) buffer.pointer;
-	if (!device_enum || device_enum->type != ACPI_TYPE_BUFFER) {
-		printk(KERN_ERR "Invalid SN06 return object 0x%.2x\n",
-				device_enum->type);
+	if (!device_enum) {
+		pr_err("Invalid SN06 return object\n");
+		goto out_no_enum;
+	}
+	if (device_enum->type != ACPI_TYPE_BUFFER) {
+		pr_err("Invalid SN06 return object type 0x%.2x\n",
+		       device_enum->type);
 		goto out_no_enum;
 	}
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 4bdb13796e2..5d6119bed00 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5838,75 +5838,6 @@ static struct ibm_struct thermal_driver_data = {
 };
 
 /*************************************************************************
- * EC Dump subdriver
- */
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(struct seq_file *m)
-{
-	int i, j;
-	u8 v;
-
-	seq_printf(m, "EC      "
-		       " +00 +01 +02 +03 +04 +05 +06 +07"
-		       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
-	for (i = 0; i < 256; i += 16) {
-		seq_printf(m, "EC 0x%02x:", i);
-		for (j = 0; j < 16; j++) {
-			if (!acpi_ec_read(i + j, &v))
-				break;
-			if (v != ecdump_regs[i + j])
-				seq_printf(m, " *%02x", v);
-			else
-				seq_printf(m, "  %02x", v);
-			ecdump_regs[i + j] = v;
-		}
-		seq_putc(m, '\n');
-		if (j != 16)
-			break;
-	}
-
-	/* These are way too dangerous to advertise openly... */
-#if 0
-	seq_printf(m, "commands:\t0x<offset> 0x<value>"
-		       " (<offset> is 00-ff, <value> is 00-ff)\n");
-	seq_printf(m, "commands:\t0x<offset> <value>  "
-		       " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
-	return 0;
-}
-
-static int ecdump_write(char *buf)
-{
-	char *cmd;
-	int i, v;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
-			/* i and v set */
-		} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
-			/* i and v set */
-		} else
-			return -EINVAL;
-		if (i >= 0 && i < 256 && v >= 0 && v < 256) {
-			if (!acpi_ec_write(i, v))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct ibm_struct ecdump_driver_data = {
-	.name = "ecdump",
-	.read = ecdump_read,
-	.write = ecdump_write,
-	.flags.experimental = 1,
-};
-
-/*************************************************************************
  * Backlight/brightness subdriver
  */
 
@@ -8883,9 +8814,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
 		.data = &thermal_driver_data,
 	},
 	{
-		.data = &ecdump_driver_data,
-	},
-	{
 		.init = brightness_init,
 		.data = &brightness_driver_data,
 	},
@@ -8993,7 +8921,6 @@ TPACPI_PARAM(light);
 TPACPI_PARAM(cmos);
 TPACPI_PARAM(led);
 TPACPI_PARAM(beep);
-TPACPI_PARAM(ecdump);
 TPACPI_PARAM(brightness);
 TPACPI_PARAM(volume);
 TPACPI_PARAM(fan);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 37aa1479855..7d67a45bb2b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -4,6 +4,7 @@
  *
  *  Copyright (C) 2002-2004 John Belmonte
  *  Copyright (C) 2008 Philip Langdale
+ *  Copyright (C) 2010 Pierre Ducroquet
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -47,6 +48,7 @@
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/slab.h>
 
 #include <asm/uaccess.h>
@@ -129,6 +131,8 @@ enum {KE_KEY, KE_END};
 
 static struct key_entry toshiba_acpi_keymap[]  = {
 	{KE_KEY, 0x101, KEY_MUTE},
+	{KE_KEY, 0x102, KEY_ZOOMOUT},
+	{KE_KEY, 0x103, KEY_ZOOMIN},
 	{KE_KEY, 0x13b, KEY_COFFEE},
 	{KE_KEY, 0x13c, KEY_BATTERY},
 	{KE_KEY, 0x13d, KEY_SLEEP},
@@ -285,6 +289,7 @@ struct toshiba_acpi_dev {
 	struct platform_device *p_dev;
 	struct rfkill *bt_rfk;
 	struct input_dev *hotkey_dev;
+	int illumination_installed;
 	acpi_handle handle;
 
 	const char *bt_name;
@@ -292,6 +297,110 @@ struct toshiba_acpi_dev {
 	struct mutex mutex;
 };
 
+/* Illumination support */
+static int toshiba_illumination_available(void)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return 0;
+	}
+	in[0] = 0xf400;
+	status = hci_raw(in, out);
+	return 1;
+}
+
+static void toshiba_illumination_set(struct led_classdev *cdev,
+				     enum led_brightness brightness)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+
+	/* First request : initialize communication. */
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return;
+	}
+
+	if (brightness) {
+		/* Switch the illumination on */
+		in[0] = 0xf400;
+		in[1] = 0x14e;
+		in[2] = 1;
+		status = hci_raw(in, out);
+		if (ACPI_FAILURE(status)) {
+			printk(MY_INFO "ACPI call for illumination failed.\n");
+			return;
+		}
+	} else {
+		/* Switch the illumination off */
+		in[0] = 0xf400;
+		in[1] = 0x14e;
+		in[2] = 0;
+		status = hci_raw(in, out);
+		if (ACPI_FAILURE(status)) {
+			printk(MY_INFO "ACPI call for illumination failed.\n");
+			return;
+		}
+	}
+
+	/* Last request : close communication. */
+	in[0] = 0xf200;
+	in[1] = 0;
+	in[2] = 0;
+	hci_raw(in, out);
+}
+
+static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+	enum led_brightness result;
+
+	/* First request : initialize communication. */
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return LED_OFF;
+	}
+
+	/* Check the illumination */
+	in[0] = 0xf300;
+	in[1] = 0x14e;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "ACPI call for illumination failed.\n");
+		return LED_OFF;
+	}
+
+	result = out[2] ? LED_FULL : LED_OFF;
+
+	/* Last request : close communication. */
+	in[0] = 0xf200;
+	in[1] = 0;
+	in[2] = 0;
+	hci_raw(in, out);
+
+	return result;
+}
+
+static struct led_classdev toshiba_led = {
+	.name           = "toshiba::illumination",
+	.max_brightness = 1,
+	.brightness_set = toshiba_illumination_set,
+	.brightness_get = toshiba_illumination_get,
+};
+
 static struct toshiba_acpi_dev toshiba_acpi = {
 	.bt_name = "Toshiba Bluetooth",
 };
@@ -720,25 +829,22 @@ static const struct file_operations version_proc_fops = {
 
 #define PROC_TOSHIBA		"toshiba"
 
-static acpi_status __init add_device(void)
+static void __init create_toshiba_proc_entries(void)
 {
 	proc_create("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir, &lcd_proc_fops);
 	proc_create("video", S_IRUGO | S_IWUSR, toshiba_proc_dir, &video_proc_fops);
 	proc_create("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir, &fan_proc_fops);
 	proc_create("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir, &keys_proc_fops);
 	proc_create("version", S_IRUGO, toshiba_proc_dir, &version_proc_fops);
-
-	return AE_OK;
 }
 
-static acpi_status remove_device(void)
+static void remove_toshiba_proc_entries(void)
 {
 	remove_proc_entry("lcd", toshiba_proc_dir);
 	remove_proc_entry("video", toshiba_proc_dir);
 	remove_proc_entry("fan", toshiba_proc_dir);
 	remove_proc_entry("keys", toshiba_proc_dir);
 	remove_proc_entry("version", toshiba_proc_dir);
-	return AE_OK;
 }
 
 static struct backlight_ops toshiba_backlight_data = {
@@ -906,7 +1012,7 @@ static void toshiba_acpi_exit(void)
 	if (toshiba_backlight_device)
 		backlight_device_unregister(toshiba_backlight_device);
 
-	remove_device();
+	remove_toshiba_proc_entries();
 
 	if (toshiba_proc_dir)
 		remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
@@ -914,6 +1020,9 @@ static void toshiba_acpi_exit(void)
 	acpi_remove_notify_handler(toshiba_acpi.handle, ACPI_DEVICE_NOTIFY,
 				   toshiba_acpi_notify);
 
+	if (toshiba_acpi.illumination_installed)
+		led_classdev_unregister(&toshiba_led);
+
 	platform_device_unregister(toshiba_acpi.p_dev);
 
 	return;
@@ -921,7 +1030,6 @@ static void toshiba_acpi_exit(void)
 
 static int __init toshiba_acpi_init(void)
 {
-	acpi_status status = AE_OK;
 	u32 hci_result;
 	bool bt_present;
 	int ret = 0;
@@ -969,11 +1077,7 @@ static int __init toshiba_acpi_init(void)
 		toshiba_acpi_exit();
 		return -ENODEV;
 	} else {
-		status = add_device();
-		if (ACPI_FAILURE(status)) {
-			toshiba_acpi_exit();
-			return -ENODEV;
-		}
+		create_toshiba_proc_entries();
 	}
 
 	props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
@@ -1013,6 +1117,13 @@ static int __init toshiba_acpi_init(void)
 		}
 	}
 
+	toshiba_acpi.illumination_installed = 0;
+	if (toshiba_illumination_available()) {
+		if (!led_classdev_register(&(toshiba_acpi.p_dev->dev),
+					   &toshiba_led))
+			toshiba_acpi.illumination_installed = 1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index e4eaa14ed98..b2978a04317 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -518,8 +518,13 @@ static void wmi_notify_debug(u32 value, void *context)
 {
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
+	acpi_status status;
 
-	wmi_get_event_data(value, &response);
+	status = wmi_get_event_data(value, &response);
+	if (status != AE_OK) {
+		printk(KERN_INFO "wmi: bad event status 0x%x\n", status);
+		return;
+	}
 
 	obj = (union acpi_object *)response.pointer;
 
@@ -543,6 +548,7 @@ static void wmi_notify_debug(u32 value, void *context)
 	default:
 		printk("object type 0x%X\n", obj->type);
 	}
+	kfree(obj);
 }
 
 /**
@@ -804,7 +810,7 @@ static bool guid_already_parsed(const char *guid_string)
 /*
  * Parse the _WDG method for the GUID data blocks
  */
-static __init acpi_status parse_wdg(acpi_handle handle)
+static acpi_status parse_wdg(acpi_handle handle)
 {
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *obj;
@@ -827,8 +833,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 	total = obj->buffer.length / sizeof(struct guid_block);
 
 	gblock = kmemdup(obj->buffer.pointer, obj->buffer.length, GFP_KERNEL);
-	if (!gblock)
-		return AE_NO_MEMORY;
+	if (!gblock) {
+		status = AE_NO_MEMORY;
+		goto out_free_pointer;
+	}
 
 	for (i = 0; i < total; i++) {
 		/*
@@ -848,8 +856,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 			wmi_dump_wdg(&gblock[i]);
 
 		wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL);
-		if (!wblock)
-			return AE_NO_MEMORY;
+		if (!wblock) {
+			status = AE_NO_MEMORY;
+			goto out_free_gblock;
+		}
 
 		wblock->gblock = gblock[i];
 		wblock->handle = handle;
@@ -860,8 +870,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 		list_add_tail(&wblock->list, &wmi_blocks.list);
 	}
 
-	kfree(out.pointer);
+out_free_gblock:
 	kfree(gblock);
+out_free_pointer:
+	kfree(out.pointer);
 
 	return status;
 }
@@ -947,7 +959,7 @@ static int acpi_wmi_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
-static int __init acpi_wmi_add(struct acpi_device *device)
+static int acpi_wmi_add(struct acpi_device *device)
 {
 	acpi_status status;
 	int result = 0;
diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c
index 5dba90995d9..88b3cde5259 100644
--- a/drivers/pnp/core.c
+++ b/drivers/pnp/core.c
@@ -164,6 +164,9 @@ int __pnp_add_device(struct pnp_dev *dev)
 	list_add_tail(&dev->global_list, &pnp_global);
 	list_add_tail(&dev->protocol_list, &dev->protocol->devices);
 	spin_unlock(&pnp_lock);
+	if (dev->protocol->can_wakeup)
+		device_set_wakeup_capable(&dev->dev,
+				dev->protocol->can_wakeup(dev));
 	return device_register(&dev->dev);
 }
 
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index f7ff628b7d9..dc4e32e031e 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -122,17 +122,37 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 }
 
 #ifdef CONFIG_ACPI_SLEEP
+static bool pnpacpi_can_wakeup(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi_dev = dev->data;
+	acpi_handle handle = acpi_dev->handle;
+
+	return acpi_bus_can_wakeup(handle);
+}
+
 static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
 {
 	struct acpi_device *acpi_dev = dev->data;
 	acpi_handle handle = acpi_dev->handle;
 	int power_state;
 
+	if (device_can_wakeup(&dev->dev)) {
+		int rc = acpi_pm_device_sleep_wake(&dev->dev,
+				device_may_wakeup(&dev->dev));
+
+		if (rc)
+			return rc;
+	}
 	power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
 	if (power_state < 0)
 		power_state = (state.event == PM_EVENT_ON) ?
 				ACPI_STATE_D0 : ACPI_STATE_D3;
 
+	/* acpi_bus_set_power() often fails (keyboard port can't be
+	 * powered-down?), and in any case, our return value is ignored
+	 * by pnp_bus_suspend().  Hence we don't revert the wakeup
+	 * setting if the set_power fails.
+	 */
 	return acpi_bus_set_power(handle, power_state);
 }
 
@@ -141,6 +161,8 @@ static int pnpacpi_resume(struct pnp_dev *dev)
 	struct acpi_device *acpi_dev = dev->data;
 	acpi_handle handle = acpi_dev->handle;
 
+	if (device_may_wakeup(&dev->dev))
+		acpi_pm_device_sleep_wake(&dev->dev, false);
 	return acpi_bus_set_power(handle, ACPI_STATE_D0);
 }
 #endif
@@ -151,6 +173,7 @@ struct pnp_protocol pnpacpi_protocol = {
 	.set	 = pnpacpi_set_resources,
 	.disable = pnpacpi_disable_resources,
 #ifdef CONFIG_ACPI_SLEEP
+	.can_wakeup = pnpacpi_can_wakeup,
 	.suspend = pnpacpi_suspend,
 	.resume = pnpacpi_resume,
 #endif
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index d762a0cbc6a..84d3c43cf2b 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -43,10 +43,9 @@
 struct ds278x_info;
 
 struct ds278x_battery_ops {
-	int	(*get_current)(struct ds278x_info *info, int *current_uA);
-	int	(*get_voltage)(struct ds278x_info *info, int *voltage_uA);
-	int	(*get_capacity)(struct ds278x_info *info, int *capacity_uA);
-
+	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA);
+	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA);
 };
 
 #define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
@@ -163,7 +162,7 @@ static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
 	if (err)
 		return err;
 	*capacity = raw;
-	return raw;
+	return 0;
 }
 
 static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
@@ -213,11 +212,11 @@ static int ds278x_get_status(struct ds278x_info *info, int *status)
 	int current_uA;
 	int capacity;
 
-	err = info->ops->get_current(info, &current_uA);
+	err = info->ops->get_battery_current(info, &current_uA);
 	if (err)
 		return err;
 
-	err = info->ops->get_capacity(info, &capacity);
+	err = info->ops->get_battery_capacity(info, &capacity);
 	if (err)
 		return err;
 
@@ -246,15 +245,15 @@ static int ds278x_battery_get_property(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_CAPACITY:
-		ret = info->ops->get_capacity(info, &val->intval);
+		ret = info->ops->get_battery_capacity(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		ret = info->ops->get_voltage(info, &val->intval);
+		ret = info->ops->get_battery_voltage(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
-		ret = info->ops->get_current(info, &val->intval);
+		ret = info->ops->get_battery_current(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_TEMP:
@@ -307,14 +306,14 @@ enum ds278x_num_id {
 
 static struct ds278x_battery_ops ds278x_ops[] = {
 	[DS2782] = {
-		.get_current  = ds2782_get_current,
-		.get_voltage  = ds2782_get_voltage,
-		.get_capacity = ds2782_get_capacity,
+		.get_battery_current  = ds2782_get_current,
+		.get_battery_voltage  = ds2782_get_voltage,
+		.get_battery_capacity = ds2782_get_capacity,
 	},
 	[DS2786] = {
-		.get_current  = ds2786_get_current,
-		.get_voltage  = ds2786_get_voltage,
-		.get_capacity = ds2786_get_capacity,
+		.get_battery_current  = ds2786_get_current,
+		.get_battery_voltage  = ds2786_get_voltage,
+		.get_battery_capacity = ds2786_get_capacity,
 	}
 };
 
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index f3e22c9fe20..2f2f9a6f54f 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -225,7 +225,6 @@ static int __devinit max17040_probe(struct i2c_client *client,
 	ret = power_supply_register(&client->dev, &chip->battery);
 	if (ret) {
 		dev_err(&client->dev, "failed: power supply register\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(chip);
 		return ret;
 	}
@@ -245,7 +244,6 @@ static int __devexit max17040_remove(struct i2c_client *client)
 
 	power_supply_unregister(&chip->battery);
 	cancel_delayed_work(&chip->work);
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index 9cca465436e..85064a9f649 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -9,19 +9,13 @@
  *
  */
 
-#include <linux/init.h>
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-#include <linux/i2c.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
 #include <linux/z2_battery.h>
 
 #define	Z2_DEFAULT_NAME	"Z2"
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 7b14a67bdca..11790990277 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -286,7 +286,7 @@ static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
 {
 	struct ab3100_regulator *abreg = reg->reg_data;
 
-	if (selector > abreg->voltages_len)
+	if (selector >= abreg->voltages_len)
 		return -EINVAL;
 	return abreg->typ_voltages[selector];
 }
@@ -318,7 +318,7 @@ static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
 	regval &= 0xE0;
 	regval >>= 5;
 
-	if (regval > abreg->voltages_len) {
+	if (regval >= abreg->voltages_len) {
 		dev_err(&reg->dev,
 			"regulator register %02x contains an illegal voltage setting\n",
 			abreg->regreg);
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 671a7d1f1f0..8ae3732eb24 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -519,8 +519,6 @@ static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
 	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
 	int i;
 
-	i2c_set_clientdata(i2c, NULL);
-
 	for (i = 0; i < lp3971->num_regulators; i++)
 		regulator_unregister(lp3971->rdev[i]);
 
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index b3c1afc1688..2b54d9d75f1 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -244,7 +244,6 @@ static int __devexit max1586_pmic_remove(struct i2c_client *client)
 	for (i = 0; i <= MAX1586_V6; i++)
 		if (rdev[i])
 			regulator_unregister(rdev[i]);
-	i2c_set_clientdata(client, NULL);
 	kfree(rdev);
 
 	return 0;
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index bfc4c5ffdc9..4520ace3f7e 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -357,7 +357,6 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 	dev_info(info->dev, "Max8649 regulator device is detected.\n");
 	return 0;
 out:
-	i2c_set_clientdata(client, NULL);
 	kfree(info);
 	return ret;
 }
@@ -369,7 +368,6 @@ static int __devexit max8649_regulator_remove(struct i2c_client *client)
 	if (info) {
 		if (info->regulator)
 			regulator_unregister(info->regulator);
-		i2c_set_clientdata(client, NULL);
 		kfree(info);
 	}
 
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index 3790b21879f..d97220efae5 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -471,7 +471,6 @@ static int __devexit max8660_remove(struct i2c_client *client)
 	for (i = 0; i < MAX8660_V_END; i++)
 		if (rdev[i])
 			regulator_unregister(rdev[i]);
-	i2c_set_clientdata(client, NULL);
 	kfree(rdev);
 
 	return 0;
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 8e2f2098b00..f50afc9f287 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -538,9 +538,6 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
 	struct tps_pmic *tps = i2c_get_clientdata(client);
 	int i;
 
-	/* clear the client data in i2c */
-	i2c_set_clientdata(client, NULL);
-
 	for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
 		regulator_unregister(tps->rdev[i]);
 
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 14b4576281c..8152d65220f 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/mfd/tps6507x.h>
@@ -101,9 +102,12 @@ struct tps_info {
 	unsigned max_uV;
 	u8 table_len;
 	const u16 *table;
+
+	/* Does DCDC high or the low register defines output voltage? */
+	bool defdcdc_default;
 };
 
-static const struct tps_info tps6507x_pmic_regs[] = {
+static struct tps_info tps6507x_pmic_regs[] = {
 	{
 		.name = "VDCDC1",
 		.min_uV = 725000,
@@ -145,7 +149,7 @@ struct tps6507x_pmic {
 	struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
 	struct tps6507x_dev *mfd;
 	struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
-	const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+	struct tps_info *info[TPS6507X_NUM_REGULATOR];
 	struct mutex io_lock;
 };
 static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
@@ -341,10 +345,16 @@ static int tps6507x_pmic_dcdc_get_voltage(struct regulator_dev *dev)
 		reg = TPS6507X_REG_DEFDCDC1;
 		break;
 	case TPS6507X_DCDC_2:
-		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC2_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC2_LOW;
 		break;
 	case TPS6507X_DCDC_3:
-		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC3_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC3_LOW;
 		break;
 	default:
 		return -EINVAL;
@@ -370,10 +380,16 @@ static int tps6507x_pmic_dcdc_set_voltage(struct regulator_dev *dev,
 		reg = TPS6507X_REG_DEFDCDC1;
 		break;
 	case TPS6507X_DCDC_2:
-		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC2_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC2_LOW;
 		break;
 	case TPS6507X_DCDC_3:
-		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC3_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC3_LOW;
 		break;
 	default:
 		return -EINVAL;
@@ -532,7 +548,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
 {
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
 	static int desc_id;
-	const struct tps_info *info = &tps6507x_pmic_regs[0];
+	struct tps_info *info = &tps6507x_pmic_regs[0];
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
 	struct tps6507x_pmic *tps;
@@ -569,6 +585,12 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
 		/* Register the regulators */
 		tps->info[i] = info;
+		if (init_data->driver_data) {
+			struct tps6507x_reg_platform_data *data =
+							init_data->driver_data;
+			tps->info[i]->defdcdc_default = data->defdcdc_default;
+		}
+
 		tps->desc[i].name = info->name;
 		tps->desc[i].id = desc_id++;
 		tps->desc[i].n_voltages = num_voltages[i];
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 723cd1fb486..0e6ed7db936 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1495,7 +1495,7 @@ int wm8350_register_regulator(struct wm8350 *wm8350, int reg,
 	if (ret != 0) {
 		dev_err(wm8350->dev, "Failed to register regulator %d: %d\n",
 			reg, ret);
-		platform_device_del(pdev);
+		platform_device_put(pdev);
 		wm8350->pmic.pdev[reg] = NULL;
 	}
 
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 92a8f6cacda..34647fc1ee9 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -29,6 +29,7 @@
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 /*
  * The DaVinci RTC is a simple RTC with the following
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index de033b7ac21..d827ce570a8 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -777,7 +777,7 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 
 read_rtc:
 	/* read RTC registers */
-	tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+	tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
 	if (tmp != 8) {
 		pr_debug("read error %d\n", tmp);
 		err = -EIO;
@@ -862,7 +862,7 @@ read_rtc:
 		if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
 			tmp += 12;
 		i2c_smbus_write_byte_data(client,
-				DS1307_REG_HOUR,
+				ds1307->offset + DS1307_REG_HOUR,
 				bin2bcd(tmp));
 	}
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 61945734ad0..1f0007fd443 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -403,7 +403,6 @@ out_irq:
 		free_irq(client->irq, client);
 
 out_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(ds1374);
 	return ret;
 }
@@ -422,7 +421,6 @@ static int __devexit ds1374_remove(struct i2c_client *client)
 	}
 
 	rtc_device_unregister(ds1374->rtc);
-	i2c_set_clientdata(client, NULL);
 	kfree(ds1374);
 	return 0;
 }
diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
index f0dbf9cb8f9..db5d8c416d2 100644
--- a/drivers/rtc/rtc-mpc5121.c
+++ b/drivers/rtc/rtc-mpc5121.c
@@ -279,7 +279,7 @@ static int __devinit mpc5121_rtc_probe(struct of_device *op,
 	if (!rtc)
 		return -ENOMEM;
 
-	rtc->regs = of_iomap(op->node, 0);
+	rtc->regs = of_iomap(op->dev.of_node, 0);
 	if (!rtc->regs) {
 		dev_err(&op->dev, "%s: couldn't map io space\n", __func__);
 		err = -ENOSYS;
@@ -290,7 +290,7 @@ static int __devinit mpc5121_rtc_probe(struct of_device *op,
 
 	dev_set_drvdata(&op->dev, rtc);
 
-	rtc->irq = irq_of_parse_and_map(op->node, 1);
+	rtc->irq = irq_of_parse_and_map(op->dev.of_node, 1);
 	err = request_irq(rtc->irq, mpc5121_rtc_handler, IRQF_DISABLED,
 						"mpc5121-rtc", &op->dev);
 	if (err) {
@@ -299,7 +299,7 @@ static int __devinit mpc5121_rtc_probe(struct of_device *op,
 		goto out_dispose;
 	}
 
-	rtc->irq_periodic = irq_of_parse_and_map(op->node, 0);
+	rtc->irq_periodic = irq_of_parse_and_map(op->dev.of_node, 0);
 	err = request_irq(rtc->irq_periodic, mpc5121_rtc_handler_upd,
 				IRQF_DISABLED, "mpc5121-rtc_upd", &op->dev);
 	if (err) {
@@ -365,9 +365,11 @@ static struct of_device_id mpc5121_rtc_match[] __devinitdata = {
 };
 
 static struct of_platform_driver mpc5121_rtc_driver = {
-	.owner = THIS_MODULE,
-	.name = "mpc5121-rtc",
-	.match_table = mpc5121_rtc_match,
+	.driver = {
+		.name = "mpc5121-rtc",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc5121_rtc_match,
+	},
 	.probe = mpc5121_rtc_probe,
 	.remove = __devexit_p(mpc5121_rtc_remove),
 };
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 3587d9922f2..71bbefc3544 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -456,7 +456,7 @@ static struct rtc_class_ops stv2_pl031_ops = {
 	.irq_set_freq = pl031_irq_set_freq,
 };
 
-static struct amba_id pl031_ids[] __initdata = {
+static struct amba_id pl031_ids[] = {
 	{
 		.id = 0x00041031,
 		.mask = 0x000fffff,
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index b65c82f792d..789f62f9b47 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -632,7 +632,6 @@ errout_reg:
 	rtc_device_unregister(rx8025->rtc);
 
 errout_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(rx8025);
 
 errout:
@@ -656,7 +655,6 @@ static int __devexit rx8025_remove(struct i2c_client *client)
 
 	rx8025_sysfs_unregister(&client->dev);
 	rtc_device_unregister(rx8025->rtc);
-	i2c_set_clientdata(client, NULL);
 	kfree(rx8025);
 	return 0;
 }
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index 9718aaaa821..600b890a3c1 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -168,7 +168,7 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
 		(data | RX8581_CTRL_STOP));
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
@@ -182,6 +182,20 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 		return -EIO;
 	}
 
+	/* get VLF and clear it */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read flag register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+		(data & ~(RX8581_FLAG_VLF)));
+	if (err != 0) {
+		dev_err(&client->dev, "Unable to write flag register\n");
+		return -EIO;
+	}
+
 	/* Restart the clock */
 	data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
 	if (data < 0) {
@@ -189,8 +203,8 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
-		(data | ~(RX8581_CTRL_STOP)));
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+		(data & ~(RX8581_CTRL_STOP)));
 	if (err != 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
 		return -EIO;
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index def4d396d0b..f789e002c9b 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -275,7 +275,6 @@ exit_dummy:
 		if (s35390a->client[i])
 			i2c_unregister_device(s35390a->client[i]);
 	kfree(s35390a);
-	i2c_set_clientdata(client, NULL);
 
 exit:
 	return err;
@@ -292,7 +291,6 @@ static int s35390a_remove(struct i2c_client *client)
 
 	rtc_device_unregister(s35390a->rtc);
 	kfree(s35390a);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index e5972b2c17b..70b68d35f96 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -495,8 +495,6 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
  	pr_debug("s3c2410_rtc: RTCCON=%02x\n",
 		 readb(s3c_rtc_base + S3C2410_RTCCON));
 
-	s3c_rtc_setfreq(&pdev->dev, 1);
-
 	device_init_wakeup(&pdev->dev, 1);
 
 	/* register RTC and exit */
@@ -510,14 +508,17 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 		goto err_nortc;
 	}
 
+	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
 		rtc->max_user_freq = 32768;
 	else
 		rtc->max_user_freq = 128;
 
-	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
-
 	platform_set_drvdata(pdev, rtc);
+
+	s3c_rtc_setfreq(&pdev->dev, 1);
+
 	return 0;
 
  err_nortc:
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 34d51dd4c53..bed7b4634cc 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -948,8 +948,10 @@ static ssize_t dasd_alias_show(struct device *dev,
 	if (device->discipline && device->discipline->get_uid &&
 	    !device->discipline->get_uid(device, &uid)) {
 		if (uid.type == UA_BASE_PAV_ALIAS ||
-		    uid.type == UA_HYPER_PAV_ALIAS)
+		    uid.type == UA_HYPER_PAV_ALIAS) {
+			dasd_put_device(device);
 			return sprintf(buf, "1\n");
+		}
 	}
 	dasd_put_device(device);
 
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index ce7cb87479f..407d0e9adfa 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -713,7 +713,7 @@ int chsc_determine_base_channel_path_desc(struct chp_id chpid,
 	ret = chsc_determine_channel_path_desc(chpid, 0, 0, 0, 0, chsc_resp);
 	if (ret)
 		goto out_free;
-	memcpy(desc, &chsc_resp->data, chsc_resp->length);
+	memcpy(desc, &chsc_resp->data, sizeof(*desc));
 out_free:
 	kfree(chsc_resp);
 	return ret;
diff --git a/drivers/s390/cio/itcw.c b/drivers/s390/cio/itcw.c
index 17da9ab932e..a0ae2956477 100644
--- a/drivers/s390/cio/itcw.c
+++ b/drivers/s390/cio/itcw.c
@@ -42,7 +42,7 @@
  * size_t size;
  *
  * size = itcw_calc_size(1, 2, 0);
- * buffer = kmalloc(size, GFP_DMA);
+ * buffer = kmalloc(size, GFP_KERNEL | GFP_DMA);
  * if (!buffer)
  *	return -ENOMEM;
  * itcw = itcw_init(buffer, size, ITCW_OP_READ, 1, 2, 0);
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index e3dbeda9717..fd068bc1bd0 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -714,6 +714,14 @@ static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *act)
 	if (zfcp_erp_adapter_strategy_open_fsf_xport(act) == ZFCP_ERP_FAILED)
 		return ZFCP_ERP_FAILED;
 
+	if (mempool_resize(act->adapter->pool.status_read_data,
+			   act->adapter->stat_read_buf_num, GFP_KERNEL))
+		return ZFCP_ERP_FAILED;
+
+	if (mempool_resize(act->adapter->pool.status_read_req,
+			   act->adapter->stat_read_buf_num, GFP_KERNEL))
+		return ZFCP_ERP_FAILED;
+
 	atomic_set(&act->adapter->stat_miss, act->adapter->stat_read_buf_num);
 	if (zfcp_status_read_refill(act->adapter))
 		return ZFCP_ERP_FAILED;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 9ac6a6e4a60..71663fb7731 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -496,7 +496,8 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 
 	adapter->hydra_version = bottom->adapter_type;
 	adapter->timer_ticks = bottom->timer_interval;
-	adapter->stat_read_buf_num = max(bottom->status_read_buf_num, (u16)16);
+	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
+					 (u16)FSF_STATUS_READS_RECOM);
 
 	if (fc_host_permanent_port_name(shost) == -1)
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
@@ -719,11 +720,6 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio,
 	zfcp_qdio_req_init(adapter->qdio, &req->qdio_req, req->req_id, sbtype,
 			   req->qtcb, sizeof(struct fsf_qtcb));
 
-	if (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP)) {
-		zfcp_fsf_req_free(req);
-		return ERR_PTR(-EIO);
-	}
-
 	return req;
 }
 
@@ -981,7 +977,7 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
 	}
 
 	/* use single, unchained SBAL if it can hold the request */
-	if (zfcp_qdio_sg_one_sbale(sg_req) || zfcp_qdio_sg_one_sbale(sg_resp)) {
+	if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp)) {
 		zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req,
 						sg_req, sg_resp);
 		return 0;
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 28117e130e2..6fa5e045317 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -251,7 +251,8 @@ static int zfcp_qdio_sbal_check(struct zfcp_qdio *qdio)
 	struct zfcp_qdio_queue *req_q = &qdio->req_q;
 
 	spin_lock_bh(&qdio->req_q_lock);
-	if (atomic_read(&req_q->count))
+	if (atomic_read(&req_q->count) ||
+	    !(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return 1;
 	spin_unlock_bh(&qdio->req_q_lock);
 	return 0;
@@ -274,8 +275,13 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio *qdio)
 	spin_unlock_bh(&qdio->req_q_lock);
 	ret = wait_event_interruptible_timeout(qdio->req_q_wq,
 			       zfcp_qdio_sbal_check(qdio), 5 * HZ);
+
+	if (!(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
+		return -EIO;
+
 	if (ret > 0)
 		return 0;
+
 	if (!ret) {
 		atomic_inc(&qdio->req_q_full);
 		/* assume hanging outbound queue, try queue recovery */
@@ -375,6 +381,8 @@ void zfcp_qdio_close(struct zfcp_qdio *qdio)
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
 	spin_unlock_bh(&qdio->req_q_lock);
 
+	wake_up(&qdio->req_q_wq);
+
 	qdio_shutdown(qdio->adapter->ccw_device,
 		      QDIO_FLAG_CLEANUP_USING_CLEAR);
 
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index d53e62ab09d..aacbe14e2e7 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -554,7 +554,7 @@ static int opiocgetnext(unsigned int cmd, void __user *argp)
 static int openprom_bsd_ioctl(struct file * file,
 			      unsigned int cmd, unsigned long arg)
 {
-	DATA *data = (DATA *) file->private_data;
+	DATA *data = file->private_data;
 	void __user *argp = (void __user *)arg;
 	int err;
 
@@ -601,7 +601,7 @@ static int openprom_bsd_ioctl(struct file * file,
 static long openprom_ioctl(struct file * file,
 			   unsigned int cmd, unsigned long arg)
 {
-	DATA *data = (DATA *) file->private_data;
+	DATA *data = file->private_data;
 
 	switch (cmd) {
 	case OPROMGETOPT:
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index a864ccc0a34..989b9a8ba72 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -277,6 +277,12 @@ static int rpavscsi_init_crq_queue(struct crq_queue *queue,
 		goto reg_crq_failed;
 	}
 
+	queue->cur = 0;
+	spin_lock_init(&queue->lock);
+
+	tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
+		     (unsigned long)hostdata);
+
 	if (request_irq(vdev->irq,
 			rpavscsi_handle_event,
 			0, "ibmvscsi", (void *)hostdata) != 0) {
@@ -291,15 +297,10 @@ static int rpavscsi_init_crq_queue(struct crq_queue *queue,
 		goto req_irq_failed;
 	}
 
-	queue->cur = 0;
-	spin_lock_init(&queue->lock);
-
-	tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
-		     (unsigned long)hostdata);
-
 	return retrc;
 
       req_irq_failed:
+	tasklet_kill(&hostdata->srp_task);
 	do {
 		rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
 	} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 82ea4a8226b..f820cffb7f0 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1129,20 +1129,22 @@ static int ipr_is_same_device(struct ipr_resource_entry *res,
 }
 
 /**
- * ipr_format_resource_path - Format the resource path for printing.
+ * ipr_format_res_path - Format the resource path for printing.
  * @res_path:	resource path
  * @buf:	buffer
  *
  * Return value:
  * 	pointer to buffer
  **/
-static char *ipr_format_resource_path(u8 *res_path, char *buffer)
+static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
 {
 	int i;
+	char *p = buffer;
 
-	sprintf(buffer, "%02X", res_path[0]);
-	for (i=1; res_path[i] != 0xff; i++)
-		sprintf(buffer, "%s-%02X", buffer, res_path[i]);
+	res_path[0] = '\0';
+	p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+	for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
+		p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
 
 	return buffer;
 }
@@ -1187,7 +1189,8 @@ static void ipr_update_res_entry(struct ipr_resource_entry *res,
 
 		if (res->sdev && new_path)
 			sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
-				    ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+				    ipr_format_res_path(res->res_path, buffer,
+							sizeof(buffer)));
 	} else {
 		res->flags = cfgtew->u.cfgte->flags;
 		if (res->flags & IPR_IS_IOA_RESOURCE)
@@ -1573,7 +1576,8 @@ static void ipr_log_sis64_config_error(struct ipr_ioa_cfg *ioa_cfg,
 		ipr_err_separator;
 
 		ipr_err("Device %d : %s", i + 1,
-			 ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
+			 ipr_format_res_path(dev_entry->res_path, buffer,
+					     sizeof(buffer)));
 		ipr_log_ext_vpd(&dev_entry->vpd);
 
 		ipr_err("-----New Device Information-----\n");
@@ -1919,13 +1923,14 @@ static void ipr_log64_fabric_path(struct ipr_hostrcb *hostrcb,
 
 			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
 				     path_active_desc[i].desc, path_state_desc[j].desc,
-				     ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+				     ipr_format_res_path(fabric->res_path, buffer,
+							 sizeof(buffer)));
 			return;
 		}
 	}
 
 	ipr_err("Path state=%02X Resource Path=%s\n", path_state,
-		ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+		ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
 }
 
 static const struct {
@@ -2066,7 +2071,8 @@ static void ipr_log64_path_elem(struct ipr_hostrcb *hostrcb,
 
 			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
 				     path_status_desc[j].desc, path_type_desc[i].desc,
-				     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+				     ipr_format_res_path(cfg->res_path, buffer,
+							 sizeof(buffer)),
 				     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
 				     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
 			return;
@@ -2074,7 +2080,7 @@ static void ipr_log64_path_elem(struct ipr_hostrcb *hostrcb,
 	}
 	ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
 		     "WWN=%08X%08X\n", cfg->type_status,
-		     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+		     ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
 		     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
 		     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
 }
@@ -2139,7 +2145,7 @@ static void ipr_log_sis64_array_error(struct ipr_ioa_cfg *ioa_cfg,
 
 	ipr_err("RAID %s Array Configuration: %s\n",
 		error->protection_level,
-		ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
+		ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
 
 	ipr_err_separator;
 
@@ -2160,9 +2166,11 @@ static void ipr_log_sis64_array_error(struct ipr_ioa_cfg *ioa_cfg,
 		ipr_err("Array Member %d:\n", i);
 		ipr_log_ext_vpd(&array_entry->vpd);
 		ipr_err("Current Location: %s",
-			 ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
+			 ipr_format_res_path(array_entry->res_path, buffer,
+					     sizeof(buffer)));
 		ipr_err("Expected Location: %s",
-			 ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
+			 ipr_format_res_path(array_entry->expected_res_path,
+					     buffer, sizeof(buffer)));
 
 		ipr_err_separator;
 	}
@@ -4079,7 +4087,8 @@ static struct device_attribute ipr_adapter_handle_attr = {
 };
 
 /**
- * ipr_show_resource_path - Show the resource path for this device.
+ * ipr_show_resource_path - Show the resource path or the resource address for
+ *			    this device.
  * @dev:	device struct
  * @buf:	buffer
  *
@@ -4097,9 +4106,14 @@ static ssize_t ipr_show_resource_path(struct device *dev, struct device_attribut
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
 	res = (struct ipr_resource_entry *)sdev->hostdata;
-	if (res)
+	if (res && ioa_cfg->sis64)
 		len = snprintf(buf, PAGE_SIZE, "%s\n",
-			       ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+			       ipr_format_res_path(res->res_path, buffer,
+						   sizeof(buffer)));
+	else if (res)
+		len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
+			       res->bus, res->target, res->lun);
+
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	return len;
 }
@@ -4351,7 +4365,8 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 			scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
 		if (ioa_cfg->sis64)
 			sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
-			            ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+				    ipr_format_res_path(res->res_path, buffer,
+							sizeof(buffer)));
 		return 0;
 	}
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 9ecd2259eb3..b965f3587c9 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1684,8 +1684,9 @@ struct ipr_ucode_image_header {
 	if (ipr_is_device(hostrcb)) {					\
 		if ((hostrcb)->ioa_cfg->sis64) {			\
 			printk(KERN_ERR IPR_NAME ": %s: " fmt, 		\
-				ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
-					&hostrcb->rp_buffer[0]),	\
+				ipr_format_res_path(hostrcb->hcam.u.error64.fd_res_path, \
+					hostrcb->rp_buffer,		\
+					sizeof(hostrcb->rp_buffer)),	\
 				__VA_ARGS__);				\
 		} else {						\
 			ipr_ra_err((hostrcb)->ioa_cfg,			\
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 18735b39b3d..3ddb4dc62d5 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -542,8 +542,11 @@ MODULE_DEVICE_TABLE (of, mac53c94_match);
 
 static struct macio_driver mac53c94_driver = 
 {
-	.name 		= "mac53c94",
-	.match_table	= mac53c94_match,
+	.driver = {
+		.name 		= "mac53c94",
+		.owner		= THIS_MODULE,
+		.of_match_table	= mac53c94_match,
+	},
 	.probe		= mac53c94_probe,
 	.remove		= mac53c94_remove,
 };
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index a1c97e88068..1f784fde251 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -2036,8 +2036,11 @@ MODULE_DEVICE_TABLE (of, mesh_match);
 
 static struct macio_driver mesh_driver = 
 {
-	.name 		= "mesh",
-	.match_table	= mesh_match,
+	.driver = {
+		.name 		= "mesh",
+		.owner		= THIS_MODULE,
+		.of_match_table	= mesh_match,
+	},
 	.probe		= mesh_probe,
 	.remove		= mesh_remove,
 	.shutdown	= mesh_shutdown,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 829cc37abc4..8802e48bc06 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -97,6 +97,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
 #endif
 
 static int  sd_revalidate_disk(struct gendisk *);
+static void sd_unlock_native_capacity(struct gendisk *disk);
 static int  sd_probe(struct device *);
 static int  sd_remove(struct device *);
 static void sd_shutdown(struct device *);
@@ -1101,6 +1102,7 @@ static const struct block_device_operations sd_fops = {
 #endif
 	.media_changed		= sd_media_changed,
 	.revalidate_disk	= sd_revalidate_disk,
+	.unlock_native_capacity	= sd_unlock_native_capacity,
 };
 
 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
@@ -2121,6 +2123,26 @@ static int sd_revalidate_disk(struct gendisk *disk)
 }
 
 /**
+ *	sd_unlock_native_capacity - unlock native capacity
+ *	@disk: struct gendisk to set capacity for
+ *
+ *	Block layer calls this function if it detects that partitions
+ *	on @disk reach beyond the end of the device.  If the SCSI host
+ *	implements ->unlock_native_capacity() method, it's invoked to
+ *	give it a chance to adjust the device capacity.
+ *
+ *	CONTEXT:
+ *	Defined by block layer.  Might sleep.
+ */
+static void sd_unlock_native_capacity(struct gendisk *disk)
+{
+	struct scsi_device *sdev = scsi_disk(disk)->device;
+
+	if (sdev->host->hostt->unlock_native_capacity)
+		sdev->host->hostt->unlock_native_capacity(sdev);
+}
+
+/**
  *	sd_format_disk_name - format disk name
  *	@prefix: name prefix - ie. "sd" for SCSI disks
  *	@index: index of the disk to format name for
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 01c012da4e2..746a44621d9 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -982,6 +982,18 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
+#define PCI_DEVICE_ID_TITAN_200I	0x8028
+#define PCI_DEVICE_ID_TITAN_400I	0x8048
+#define PCI_DEVICE_ID_TITAN_800I	0x8088
+#define PCI_DEVICE_ID_TITAN_800EH	0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB	0xA008
+#define PCI_DEVICE_ID_TITAN_400EH	0xA009
+#define PCI_DEVICE_ID_TITAN_100E	0xA010
+#define PCI_DEVICE_ID_TITAN_200E	0xA012
+#define PCI_DEVICE_ID_TITAN_400E	0xA013
+#define PCI_DEVICE_ID_TITAN_800E	0xA014
+#define PCI_DEVICE_ID_TITAN_200EI	0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI	0xA017
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1541,6 +1553,10 @@ enum pci_board_num_t {
 	pbn_b3_4_115200,
 	pbn_b3_8_115200,
 
+	pbn_b4_bt_2_921600,
+	pbn_b4_bt_4_921600,
+	pbn_b4_bt_8_921600,
+
 	/*
 	 * Board-specific versions.
 	 */
@@ -1995,6 +2011,25 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b4_bt_2_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_4_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_8_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
 	/*
 	 * Entries following this are board-specific.
 	 */
@@ -3043,6 +3078,42 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
 
 	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index bcee156d2f2..0f1189605d2 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -89,15 +89,12 @@ static unsigned int altera_uart_tx_empty(struct uart_port *port)
 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 	unsigned int sigs;
 
-	spin_lock_irqsave(&port->lock, flags);
 	sigs =
 	    (readl(port->membase + ALTERA_UART_STATUS_REG) &
 	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
 	sigs |= (pp->sigs & TIOCM_RTS);
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	return sigs;
 }
@@ -105,49 +102,37 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->sigs = sigs;
 	if (sigs & TIOCM_RTS)
 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_start_tx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_stop_tx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_stop_rx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -272,10 +257,14 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
 	unsigned int isr;
 
 	isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+
+	spin_lock(&port->lock);
 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
 		altera_uart_rx_chars(pp);
 	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
 		altera_uart_tx_chars(pp);
+	spin_unlock(&port->lock);
+
 	return IRQ_RETVAL(isr);
 }
 
@@ -402,31 +391,24 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
 	return 0;
 }
 
-static void altera_uart_console_putc(struct console *co, const char c)
+static void altera_uart_console_putc(struct uart_port *port, const char c)
 {
-	struct uart_port *port = &(altera_uart_ports + co->index)->port;
-	int i;
+	while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+	         ALTERA_UART_STATUS_TRDY_MSK))
+		cpu_relax();
 
-	for (i = 0; i < 0x10000; i++) {
-		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
-		    ALTERA_UART_STATUS_TRDY_MSK)
-			break;
-	}
 	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
-	for (i = 0; i < 0x10000; i++) {
-		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
-		    ALTERA_UART_STATUS_TRDY_MSK)
-			break;
-	}
 }
 
 static void altera_uart_console_write(struct console *co, const char *s,
 				      unsigned int count)
 {
+	struct uart_port *port = &(altera_uart_ports + co->index)->port;
+
 	for (; count; count--, s++) {
-		altera_uart_console_putc(co, *s);
+		altera_uart_console_putc(port, *s);
 		if (*s == '\n')
-			altera_uart_console_putc(co, '\r');
+			altera_uart_console_putc(port, '\r');
 	}
 }
 
@@ -516,7 +498,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int altera_uart_remove(struct platform_device *pdev)
+static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638d051..50441ffe8e3 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev)
 	return 0;
 }
 
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
 	{
 		.id	= 0x00041010,
 		.mask	= 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb480b93..6ca7a44f29c 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
 struct uart_amba_port {
 	struct uart_port	port;
 	struct clk		*clk;
-	unsigned int		im;	/* interrupt mask */
+	unsigned int		im;		/* interrupt mask */
 	unsigned int		old_status;
-	unsigned int		ifls;	/* vendor-specific */
+	unsigned int		ifls;		/* vendor-specific */
+	unsigned int		lcrh_tx;	/* vendor-specific */
+	unsigned int		lcrh_rx;	/* vendor-specific */
+	bool			oversampling;   /* vendor-specific */
 	bool			autorts;
 };
 
@@ -79,16 +82,25 @@ struct uart_amba_port {
 struct vendor_data {
 	unsigned int		ifls;
 	unsigned int		fifosize;
+	unsigned int		lcrh_tx;
+	unsigned int		lcrh_rx;
+	bool			oversampling;
 };
 
 static struct vendor_data vendor_arm = {
 	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
 	.fifosize		= 16,
+	.lcrh_tx		= UART011_LCRH,
+	.lcrh_rx		= UART011_LCRH,
+	.oversampling		= false,
 };
 
 static struct vendor_data vendor_st = {
 	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
 	.fifosize		= 64,
+	.lcrh_tx		= ST_UART011_LCRH_TX,
+	.lcrh_rx		= ST_UART011_LCRH_RX,
+	.oversampling		= true,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
 	unsigned int lcr_h;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	lcr_h = readw(uap->port.membase + UART011_LCRH);
+	lcr_h = readw(uap->port.membase + uap->lcrh_tx);
 	if (break_state == -1)
 		lcr_h |= UART01x_LCRH_BRK;
 	else
 		lcr_h &= ~UART01x_LCRH_BRK;
-	writew(lcr_h, uap->port.membase + UART011_LCRH);
+	writew(lcr_h, uap->port.membase + uap->lcrh_tx);
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
@@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port)
 	writew(cr, uap->port.membase + UART011_CR);
 	writew(0, uap->port.membase + UART011_FBRD);
 	writew(1, uap->port.membase + UART011_IBRD);
-	writew(0, uap->port.membase + UART011_LCRH);
+	writew(0, uap->port.membase + uap->lcrh_rx);
+	if (uap->lcrh_tx != uap->lcrh_rx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(0, uap->port.membase + uap->lcrh_tx);
+	}
 	writew(0, uap->port.membase + UART01x_DR);
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
 		barrier();
@@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port)
 	return retval;
 }
 
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+					unsigned int lcrh)
+{
+      unsigned long val;
+
+      val = readw(uap->port.membase + lcrh);
+      val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+      writew(val, uap->port.membase + lcrh);
+}
+
 static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
-	unsigned long val;
 
 	/*
 	 * disable all interrupts
@@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port)
 	/*
 	 * disable break condition and fifos
 	 */
-	val = readw(uap->port.membase + UART011_LCRH);
-	val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
-	writew(val, uap->port.membase + UART011_LCRH);
+	pl011_shutdown_channel(uap, uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx)
+		pl011_shutdown_channel(uap, uap->lcrh_tx);
 
 	/*
 	 * Shut down the clock producer
@@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = port->uartclk * 4 / baud;
+	baud = uart_get_baud_rate(port, termios, old, 0,
+				  port->uartclk/(uap->oversampling ? 8 : 16));
+
+	if (baud > port->uartclk/16)
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+	else
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		uap->autorts = false;
 	}
 
+	if (uap->oversampling) {
+		if (baud > port->uartclk/16)
+			old_cr |= ST_UART011_CR_OVSFACT;
+		else
+			old_cr &= ~ST_UART011_CR_OVSFACT;
+	}
+
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
 	 * ----------^----------^----------^----------^-----
 	 */
-	writew(lcr_h, port->membase + UART011_LCRH);
+	writew(lcr_h, port->membase + uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(lcr_h, port->membase + uap->lcrh_tx);
+	}
 	writew(old_cr, port->membase + UART011_CR);
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 	if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
 		unsigned int lcr_h, ibrd, fbrd;
 
-		lcr_h = readw(uap->port.membase + UART011_LCRH);
+		lcr_h = readw(uap->port.membase + uap->lcrh_tx);
 
 		*parity = 'n';
 		if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 		fbrd = readw(uap->port.membase + UART011_FBRD);
 
 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+		if (uap->oversampling) {
+			if (readw(uap->port.membase + UART011_CR)
+				  & ST_UART011_CR_OVSFACT)
+				*baud *= 2;
+		}
 	}
 }
 
@@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 	}
 
 	uap->ifls = vendor->ifls;
+	uap->lcrh_rx = vendor->lcrh_rx;
+	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->oversampling = vendor->oversampling;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
@@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev)
 }
 #endif
 
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d8dd1..a182def7007 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -41,6 +41,7 @@
 #include <linux/uaccess.h>
 
 #include <asm/io.h>
+#include <asm/ioctls.h>
 
 #include <asm/mach/serial_at91.h>
 #include <mach/board.h>
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 96f7e7484fe..511cbf68787 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -797,7 +797,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
 		gpio_free(uart->rts_pin);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (UART_GET_IER(uart) && EDSSI)
+	if (UART_GET_IER(uart) & EDSSI)
 		free_irq(uart->status_irq, uart);
 #endif
 }
@@ -869,7 +869,12 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud) - ANOMALY_05000230;
+	quot = uart_get_divisor(port, baud);
+
+	/* If discipline is not IRDA, apply ANOMALY_05000230 */
+	if (termios->c_line != N_IRDA)
+		quot -= ANOMALY_05000230;
+
 	spin_lock_irqsave(&uart->port.lock, flags);
 
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 9eb62a256e9..cd6cf575902 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
 	}
 }
 
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+		const char *string, u_int count)
+{
+	unsigned int i;
+	cbd_t __iomem *bdp, *bdbase;
+	unsigned char *cpm_outp_addr;
+
+	/* Get the address of the host memory buffer.
+	 */
+	bdp = pinfo->tx_cur;
+	bdbase = pinfo->tx_bd_base;
+
+	/*
+	 * Now, do each character.  This is not as bad as it looks
+	 * since this is a holding FIFO and not a transmitting FIFO.
+	 * We could add the complexity of filling the entire transmit
+	 * buffer, but we would just wait longer between accesses......
+	 */
+	for (i = 0; i < count; i++, string++) {
+		/* Wait for transmitter fifo to empty.
+		 * Ready indicates output is ready, and xmt is doing
+		 * that, not that it is ready for us to send.
+		 */
+		while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+			;
+
+		/* Send the character out.
+		 * If the buffer address is in the CPM DPRAM, don't
+		 * convert it.
+		 */
+		cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+					pinfo);
+		*cpm_outp_addr = *string;
+
+		out_be16(&bdp->cbd_datlen, 1);
+		setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+			bdp = bdbase;
+		else
+			bdp++;
+
+		/* if a LF, also do CR... */
+		if (*string == 10) {
+			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+				;
+
+			cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+						pinfo);
+			*cpm_outp_addr = 13;
+
+			out_be16(&bdp->cbd_datlen, 1);
+			setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+			if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+				bdp = bdbase;
+			else
+				bdp++;
+		}
+	}
+
+	/*
+	 * Finally, Wait for transmitter & holding register to empty
+	 *  and restore the IER
+	 */
+	while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+		;
+
+	pinfo->tx_cur = bdp;
+}
+#endif
+
 #ifdef CONFIG_CONSOLE_POLL
 /* Serial polling routines for writing and reading from the uart while
  * in an interrupt or debug context.
@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port,
 	static char ch[2];
 
 	ch[0] = (char)c;
-	cpm_uart_early_write(pinfo->port.line, ch, 1);
+	cpm_uart_early_write(pinfo, ch, 1);
 }
 #endif /* CONFIG_CONSOLE_POLL */
 
@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 				   u_int count)
 {
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
-	unsigned int i;
-	cbd_t __iomem *bdp, *bdbase;
-	unsigned char *cp;
 	unsigned long flags;
 	int nolock = oops_in_progress;
 
@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&pinfo->port.lock, flags);
 	}
 
-	/* Get the address of the host memory buffer.
-	 */
-	bdp = pinfo->tx_cur;
-	bdbase = pinfo->tx_bd_base;
-
-	/*
-	 * Now, do each character.  This is not as bad as it looks
-	 * since this is a holding FIFO and not a transmitting FIFO.
-	 * We could add the complexity of filling the entire transmit
-	 * buffer, but we would just wait longer between accesses......
-	 */
-	for (i = 0; i < count; i++, s++) {
-		/* Wait for transmitter fifo to empty.
-		 * Ready indicates output is ready, and xmt is doing
-		 * that, not that it is ready for us to send.
-		 */
-		while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-			;
-
-		/* Send the character out.
-		 * If the buffer address is in the CPM DPRAM, don't
-		 * convert it.
-		 */
-		cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-		*cp = *s;
-
-		out_be16(&bdp->cbd_datlen, 1);
-		setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-			bdp = bdbase;
-		else
-			bdp++;
-
-		/* if a LF, also do CR... */
-		if (*s == 10) {
-			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-				;
-
-			cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-			*cp = 13;
-
-			out_be16(&bdp->cbd_datlen, 1);
-			setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-			if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-				bdp = bdbase;
-			else
-				bdp++;
-		}
-	}
-
-	/*
-	 * Finally, Wait for transmitter & holding register to empty
-	 *  and restore the IER
-	 */
-	while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-		;
-
-	pinfo->tx_cur = bdp;
+	cpm_uart_early_write(pinfo, s, count);
 
 	if (unlikely(nolock)) {
 		local_irq_restore(flags);
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index ecdc0facf7e..f8c816e7725 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -41,19 +41,6 @@ struct msm_port {
 	unsigned int		imr;
 };
 
-#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
-
-static inline void msm_write(struct uart_port *port, unsigned int val,
-			     unsigned int off)
-{
-	__raw_writel(val, port->membase + off);
-}
-
-static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
-{
-	return __raw_readl(port->membase + off);
-}
-
 static void msm_stop_tx(struct uart_port *port)
 {
 	struct msm_port *msm_port = UART_TO_MSM(port);
@@ -320,11 +307,7 @@ static void msm_init_clock(struct uart_port *port)
 	struct msm_port *msm_port = UART_TO_MSM(port);
 
 	clk_enable(msm_port->clk);
-
-	msm_write(port, 0xC0, UART_MREG);
-	msm_write(port, 0xB2, UART_NREG);
-	msm_write(port, 0x7D, UART_DREG);
-	msm_write(port, 0x1C, UART_MNDREG);
+	msm_serial_set_mnd_regs(port);
 }
 
 static int msm_startup(struct uart_port *port)
@@ -706,6 +689,8 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	if (unlikely(IS_ERR(msm_port->clk)))
 		return PTR_ERR(msm_port->clk);
 	port->uartclk = clk_get_rate(msm_port->clk);
+	printk(KERN_INFO "uartclk = %d\n", port->uartclk);
+
 
 	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!resource))
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
index 689f1fa0e84..f6ca9ca79e9 100644
--- a/drivers/serial/msm_serial.h
+++ b/drivers/serial/msm_serial.h
@@ -114,4 +114,60 @@
 #define UART_MISR	0x0010
 #define UART_ISR	0x0014
 
+#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
+
+static inline
+void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
+{
+	__raw_writel(val, port->membase + off);
+}
+
+static inline
+unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return __raw_readl(port->membase + off);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock.
+ */
+static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
+{
+	msm_write(port, 0x06, UART_MREG);
+	msm_write(port, 0xF1, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x1A, UART_MNDREG);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock divided by 4.
+ */
+static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
+{
+	msm_write(port, 0x18, UART_MREG);
+	msm_write(port, 0xF6, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x0A, UART_MNDREG);
+}
+
+static inline
+void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port)
+{
+	if (port->uartclk == 19200000)
+		msm_serial_set_mnd_regs_tcxo(port);
+	else
+		msm_serial_set_mnd_regs_tcxoby4(port);
+}
+
+/*
+ * TROUT has a specific defect that makes it report it's uartclk
+ * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special
+ * cases TROUT to use the right clock.
+ */
+#ifdef CONFIG_MACH_TROUT
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4
+#else
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk
+#endif
+
 #endif	/* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index cabbdc7ba58..5b9cde79e4e 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -2005,8 +2005,11 @@ static struct of_device_id pmz_match[] =
 MODULE_DEVICE_TABLE (of, pmz_match);
 
 static struct macio_driver pmz_driver = {
-	.name 		= "pmac_zilog",
-	.match_table	= pmz_match,
+	.driver = {
+		.name 		= "pmac_zilog",
+		.owner		= THIS_MODULE,
+		.of_match_table	= pmz_match,
+	},
 	.probe		= pmz_attach,
 	.remove		= pmz_detach,
 	.suspend	= pmz_suspend,
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 8bb715a1a7a..ab17c08ddc0 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -715,6 +715,8 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
@@ -724,8 +726,6 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
-	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
-	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
@@ -768,17 +768,26 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
 	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
 	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
+	PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
+	PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
+	PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
+	PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
+	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+	PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
 	PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
 	PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
 	PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
@@ -792,16 +801,21 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
 	PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
 	PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
 	PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
 	PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
+	PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
 	PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
 	PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
+	PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
+	PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
+	PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958b0a0..544f2e25d0e 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
 
 	con->index = line;
 	drv->cons = con;
-	add_preferred_console(con->name, line, NULL);
+
+	if (!console_set_on_cmdline)
+		add_preferred_console(con->name, line, NULL);
 
 	return 1;
 }
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c2f01..ffbf4553f66 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@ out_unmap:
 static int __devexit su_remove(struct of_device *op)
 {
 	struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+	bool kbdms = false;
 
 	if (up->su_type == SU_PORT_MS ||
-	    up->su_type == SU_PORT_KBD) {
+	    up->su_type == SU_PORT_KBD)
+		kbdms = true;
+
+	if (kbdms) {
 #ifdef CONFIG_SERIO
 		serio_unregister_port(&up->serio);
 #endif
-		kfree(up);
-	} else if (up->port.type != PORT_UNKNOWN) {
+	} else if (up->port.type != PORT_UNKNOWN)
 		uart_remove_one_port(&sunsu_reg, &up->port);
-	}
 
 	if (up->port.membase)
 		of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
 
+	if (kbdms)
+		kfree(up);
+
 	dev_set_drvdata(&op->dev, NULL);
 
 	return 0;
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index 00519595864..ceba593dc84 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -441,8 +441,10 @@ struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa)
 
 	ret = sysfs_create_bin_file(tables_kobj,
 				  &tbl_attr->attr);
-	if (ret)
+	if (ret) {
 		kfree(tbl_attr);
+		tbl_attr = NULL;
+	}
 
 	sfi_unmap_table(th);
 	return tbl_attr;
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index c585574b9ae..e91a23e5ffd 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -16,6 +16,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/module.h>
@@ -855,8 +857,8 @@ static void __init intc_register_irq(struct intc_desc *desc,
 		primary = 1;
 
 	if (!data[0] && !data[1])
-		pr_warning("intc: missing unique irq mask for "
-			   "irq %d (vect 0x%04x)\n", irq, irq2evt(irq));
+		pr_warning("missing unique irq mask for irq %d (vect 0x%04x)\n",
+			   irq, irq2evt(irq));
 
 	data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
 	data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
@@ -952,7 +954,7 @@ int __init register_intc_controller(struct intc_desc *desc)
 	struct intc_desc_int *d;
 	struct resource *res;
 
-	pr_info("intc: Registered controller '%s' with %u IRQs\n",
+	pr_info("Registered controller '%s' with %u IRQs\n",
 		desc->name, hw->nr_vectors);
 
 	d = kzalloc(sizeof(*d), GFP_NOWAIT);
@@ -1148,7 +1150,7 @@ int register_intc_userimask(unsigned long addr)
 	if (unlikely(!uimask))
 		return -ENOMEM;
 
-	pr_info("intc: userimask support registered for levels 0 -> %d\n",
+	pr_info("userimask support registered for levels 0 -> %d\n",
 		default_prio_level - 1);
 
 	return 0;
@@ -1286,7 +1288,7 @@ static int __init register_intc_sysdevs(void)
 	}
 
 	if (error)
-		pr_err("intc: sysdev registration error\n");
+		pr_err("sysdev registration error\n");
 
 	return error;
 }
diff --git a/drivers/spi/mpc512x_psc_spi.c b/drivers/spi/mpc512x_psc_spi.c
index 28a126d2742..2534b1ec3ed 100644
--- a/drivers/spi/mpc512x_psc_spi.c
+++ b/drivers/spi/mpc512x_psc_spi.c
@@ -512,29 +512,29 @@ static int __init mpc512x_psc_spi_of_probe(struct of_device *op,
 	u64 regaddr64, size64;
 	s16 id = -1;
 
-	regaddr_p = of_get_address(op->node, 0, &size64, NULL);
+	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
 	if (!regaddr_p) {
 		dev_err(&op->dev, "Invalid PSC address\n");
 		return -EINVAL;
 	}
-	regaddr64 = of_translate_address(op->node, regaddr_p);
+	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
 
 	/* get PSC id (0..11, used by port_config) */
 	if (op->dev.platform_data == NULL) {
 		const u32 *psc_nump;
 
-		psc_nump = of_get_property(op->node, "cell-index", NULL);
+		psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL);
 		if (!psc_nump || *psc_nump > 11) {
 			dev_err(&op->dev, "mpc512x_psc_spi: Device node %s "
 				"has invalid cell-index property\n",
-				op->node->full_name);
+				op->dev.of_node->full_name);
 			return -EINVAL;
 		}
 		id = *psc_nump;
 	}
 
 	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
-					irq_of_parse_and_map(op->node, 0), id);
+				irq_of_parse_and_map(op->dev.of_node, 0), id);
 }
 
 static int __exit mpc512x_psc_spi_of_remove(struct of_device *op)
@@ -550,12 +550,12 @@ static struct of_device_id mpc512x_psc_spi_of_match[] = {
 MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
 
 static struct of_platform_driver mpc512x_psc_spi_of_driver = {
-	.match_table = mpc512x_psc_spi_of_match,
 	.probe = mpc512x_psc_spi_of_probe,
 	.remove = __exit_p(mpc512x_psc_spi_of_remove),
 	.driver = {
 		.name = "mpc512x-psc-spi",
 		.owner = THIS_MODULE,
+		.of_match_table = mpc512x_psc_spi_of_match,
 	},
 };
 
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index ffa111a7e9d..97ab0a81338 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -66,28 +66,6 @@ struct mpc8xxx_spi_reg {
 	__be32 receive;
 };
 
-/* SPI Parameter RAM */
-struct spi_pram {
-	__be16	rbase;	/* Rx Buffer descriptor base address */
-	__be16	tbase;	/* Tx Buffer descriptor base address */
-	u8	rfcr;	/* Rx function code */
-	u8	tfcr;	/* Tx function code */
-	__be16	mrblr;	/* Max receive buffer length */
-	__be32	rstate;	/* Internal */
-	__be32	rdp;	/* Internal */
-	__be16	rbptr;	/* Internal */
-	__be16	rbc;	/* Internal */
-	__be32	rxtmp;	/* Internal */
-	__be32	tstate;	/* Internal */
-	__be32	tdp;	/* Internal */
-	__be16	tbptr;	/* Internal */
-	__be16	tbc;	/* Internal */
-	__be32	txtmp;	/* Internal */
-	__be32	res;	/* Tx temp. */
-	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
-	__be16	res1;	/* Reserved */
-};
-
 /* SPI Controller mode register definitions */
 #define	SPMODE_LOOP		(1 << 30)
 #define	SPMODE_CI_INACTIVEHIGH	(1 << 29)
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
index 19c0b3b34fc..d53466a249d 100644
--- a/drivers/spi/spi_ppc4xx.c
+++ b/drivers/spi/spi_ppc4xx.c
@@ -397,7 +397,7 @@ static int __init spi_ppc4xx_of_probe(struct of_device *op,
 	struct spi_master *master;
 	struct spi_bitbang *bbp;
 	struct resource resource;
-	struct device_node *np = op->node;
+	struct device_node *np = op->dev.of_node;
 	struct device *dev = &op->dev;
 	struct device_node *opbnp;
 	int ret;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b5c3b301303..0e4122ed1b3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -109,8 +109,6 @@ source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
 
-source "drivers/staging/rar_register/Kconfig"
-
 source "drivers/staging/memrar/Kconfig"
 
 source "drivers/staging/sep/Kconfig"
@@ -141,5 +139,13 @@ source "drivers/staging/ti-st/Kconfig"
 
 source "drivers/staging/adis16255/Kconfig"
 
+source "drivers/staging/xgifb/Kconfig"
+
+source "drivers/staging/mrst-touchscreen/Kconfig"
+
+source "drivers/staging/msm/Kconfig"
+
+source "drivers/staging/lirc/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e330dd5e843..ecfb0bb990b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
+obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
@@ -35,7 +36,6 @@ obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
-obj-$(CONFIG_RAR_REGISTER)	+= rar_register/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
@@ -51,3 +51,6 @@ obj-$(CONFIG_CRYSTALHD)		+= crystalhd/
 obj-$(CONFIG_CXT1E1)		+= cxt1e1/
 obj-$(CONFIG_TI_ST)		+= ti-st/
 obj-$(CONFIG_ADIS16255)		+= adis16255/
+obj-$(CONFIG_FB_XGI)		+= xgifb/
+obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH)	+= mrst-touchscreen/
+obj-$(CONFIG_MSM_STAGING)	+= msm/
diff --git a/drivers/staging/adis16255/Kconfig b/drivers/staging/adis16255/Kconfig
index a642be66ade..a883c1f4478 100644
--- a/drivers/staging/adis16255/Kconfig
+++ b/drivers/staging/adis16255/Kconfig
@@ -1,5 +1,5 @@
 config ADIS16255
-	tristate "Ananlog Devices ADIS16250/16255"
+	tristate "Analog Devices ADIS16250/16255"
 	depends on SPI && SYSFS
 	---help---
 	If you say yes here you get support for the Analog Devices
diff --git a/drivers/staging/adis16255/adis16255.c b/drivers/staging/adis16255/adis16255.c
index 1ba11f00b2e..55d66e290f7 100644
--- a/drivers/staging/adis16255/adis16255.c
+++ b/drivers/staging/adis16255/adis16255.c
@@ -361,7 +361,7 @@ err:
 
 /*-------------------------------------------------------------------------*/
 
-static int spi_adis16255_probe(struct spi_device *spi)
+static int __devinit spi_adis16255_probe(struct spi_device *spi)
 {
 
 	struct adis16255_init_data *init_data = spi->dev.platform_data;
@@ -421,7 +421,7 @@ err:
 	return status;
 }
 
-static int spi_adis16255_remove(struct spi_device *spi)
+static int __devexit spi_adis16255_remove(struct spi_device *spi)
 {
 	struct spi_adis16255_data  *spiadis    = dev_get_drvdata(&spi->dev);
 
diff --git a/drivers/staging/batman-adv/bat_sysfs.c b/drivers/staging/batman-adv/bat_sysfs.c
index e2c000b80ca..212bc21e6d6 100644
--- a/drivers/staging/batman-adv/bat_sysfs.c
+++ b/drivers/staging/batman-adv/bat_sysfs.c
@@ -225,9 +225,9 @@ static struct bat_attribute *mesh_attrs[] = {
 	NULL,
 };
 
-static ssize_t transtable_local_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t transtable_local_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -235,9 +235,9 @@ static ssize_t transtable_local_read(struct kobject *kobj,
 	return hna_local_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t transtable_global_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t transtable_global_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -245,9 +245,9 @@ static ssize_t transtable_global_read(struct kobject *kobj,
 	return hna_global_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t originators_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t originators_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -255,9 +255,9 @@ static ssize_t originators_read(struct kobject *kobj,
 	return orig_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t vis_data_read(struct kobject *kobj,
-			     struct bin_attribute *bin_attr,
-			     char *buff, loff_t off, size_t count)
+static ssize_t vis_data_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
diff --git a/drivers/staging/batman-adv/device.c b/drivers/staging/batman-adv/device.c
index ad82ec4a485..32204b5572d 100644
--- a/drivers/staging/batman-adv/device.c
+++ b/drivers/staging/batman-adv/device.c
@@ -196,7 +196,7 @@ ssize_t bat_device_read(struct file *file, char __user *buf, size_t count,
 	kfree(device_packet);
 
 	if (error)
-		return error;
+		return -EFAULT;
 
 	return sizeof(struct icmp_packet);
 }
@@ -309,7 +309,7 @@ void bat_device_add_packet(struct device_client *device_client,
 	struct device_packet *device_packet;
 	unsigned long flags;
 
-	device_packet = kmalloc(sizeof(struct device_packet), GFP_KERNEL);
+	device_packet = kmalloc(sizeof(struct device_packet), GFP_ATOMIC);
 
 	if (!device_packet)
 		return;
diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c
index 9d13979c2d8..74c70d589a9 100644
--- a/drivers/staging/batman-adv/main.c
+++ b/drivers/staging/batman-adv/main.c
@@ -127,7 +127,10 @@ int init_module(void)
 	return 0;
 
 unreg_soft_device:
-	unregister_netdevice(soft_device);
+	unregister_netdev(soft_device);
+	soft_device = NULL;
+	return -ENOMEM;
+
 free_soft_device:
 	free_netdev(soft_device);
 	soft_device = NULL;
diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c
index d8536e277a2..ac69ed871a7 100644
--- a/drivers/staging/batman-adv/send.c
+++ b/drivers/staging/batman-adv/send.c
@@ -440,6 +440,9 @@ void send_outstanding_bcast_packet(struct work_struct *work)
 	hlist_del(&forw_packet->list);
 	spin_unlock_irqrestore(&forw_bcast_list_lock, flags);
 
+	if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+		goto out;
+
 	/* rebroadcast packet */
 	rcu_read_lock();
 	list_for_each_entry_rcu(batman_if, &if_list, list) {
@@ -453,15 +456,15 @@ void send_outstanding_bcast_packet(struct work_struct *work)
 
 	forw_packet->num_packets++;
 
-	/* if we still have some more bcasts to send and we are not shutting
-	 * down */
-	if ((forw_packet->num_packets < 3) &&
-	    (atomic_read(&module_state) != MODULE_DEACTIVATING))
+	/* if we still have some more bcasts to send */
+	if (forw_packet->num_packets < 3) {
 		_add_bcast_packet_to_list(forw_packet, ((5 * HZ) / 1000));
-	else {
-		forw_packet_free(forw_packet);
-		atomic_inc(&bcast_queue_left);
+		return;
 	}
+
+out:
+	forw_packet_free(forw_packet);
+	atomic_inc(&bcast_queue_left);
 }
 
 void send_outstanding_bat_packet(struct work_struct *work)
@@ -476,6 +479,9 @@ void send_outstanding_bat_packet(struct work_struct *work)
 	hlist_del(&forw_packet->list);
 	spin_unlock_irqrestore(&forw_bat_list_lock, flags);
 
+	if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+		goto out;
+
 	send_packet(forw_packet);
 
 	/**
@@ -483,10 +489,10 @@ void send_outstanding_bat_packet(struct work_struct *work)
 	 * to determine the queues wake up time unless we are
 	 * shutting down
 	 */
-	if ((forw_packet->own) &&
-	    (atomic_read(&module_state) != MODULE_DEACTIVATING))
+	if (forw_packet->own)
 		schedule_own_packet(forw_packet->if_incoming);
 
+out:
 	/* don't count own packet */
 	if (!forw_packet->own)
 		atomic_inc(&batman_queue_left);
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 8ce307e64b5..aad47326d6d 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -100,15 +100,6 @@ menuconfig COMEDI_ISA_DRIVERS
 
 if COMEDI_ISA_DRIVERS && ISA
 
-config COMEDI_8255
-	tristate "Generic 8255 support"
-	default N
-	---help---
-	  Enable generic 8255 support.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 8255.
-
 config COMEDI_ACL7225B
 	tristate "ADlink NuDAQ ACL-7225b and compatibles support"
 	default N
@@ -130,6 +121,7 @@ config COMEDI_PCL711
 
 config COMEDI_PCL724
 	tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCL-724, PCL-722, PCL-731 and
@@ -198,6 +190,7 @@ config COMEDI_PCL818
 
 config COMEDI_PCM3724
 	tristate "Advantech PCM-3724 PC/104 card support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCM-3724 PC/104 cards.
@@ -232,18 +225,9 @@ config COMEDI_RTI802
 	  To compile this driver as a module, choose M here: the module will be
 	  called rti802.
 
-config COMEDI_DAS08
-	tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support"
-	default N
-	---help---
-	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
-	  and compatible ISA and PC/104 cards
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called das08.
-
 config COMEDI_DAS16M1
 	tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -254,6 +238,7 @@ config COMEDI_DAS16M1
 
 config COMEDI_DAS16
 	tristate "DAS-16 compatible ISA and PC/104 card support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -385,6 +370,7 @@ config COMEDI_FL512
 
 config COMEDI_AIO_AIO12_8
 	tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -466,6 +452,7 @@ config COMEDI_NI_ATMIO
 config COMEDI_NI_ATMIO16D
 	tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
 	depends on ISAPNP && COMEDI_NI_COMMON
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
@@ -667,6 +654,7 @@ config COMEDI_ADDI_APCI_3XXX
 
 config COMEDI_ADL_PCI6208
 	tristate "ADLink PCI-6208A support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ADLink PCI-6208A cards
@@ -751,6 +739,7 @@ config COMEDI_ADV_PCI1723
 
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCI DIO cards
@@ -762,6 +751,7 @@ config COMEDI_ADV_PCI_DIO
 
 config COMEDI_AMPLC_DIO200
 	tristate "Amplicon PC272E and PCI272 DIO board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PC272E and PCI272 DIO boards
@@ -771,6 +761,7 @@ config COMEDI_AMPLC_DIO200
 
 config COMEDI_AMPLC_PC236
 	tristate "Amplicon PC36AT and PCI236 DIO board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PC36AT and PCI236 DIO boards
@@ -799,6 +790,7 @@ config COMEDI_AMPLC_PCI224
 
 config COMEDI_AMPLC_PCI230
 	tristate "Amplicon PCI230 and PCI260 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -869,6 +861,7 @@ config COMEDI_II_PCI20KC
 
 config COMEDI_DAQBOARD2000
 	tristate "IOtech DAQboard/2000 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for the IOtech DAQboard/2000
@@ -896,6 +889,7 @@ config COMEDI_KE_COUNTER
 
 config COMEDI_CB_PCIDAS64
 	tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -907,6 +901,7 @@ config COMEDI_CB_PCIDAS64
 
 config COMEDI_CB_PCIDAS
 	tristate "MeasurementComputing PCI-DAS support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -920,6 +915,7 @@ config COMEDI_CB_PCIDAS
 
 config COMEDI_CB_PCIDDA
 	tristate "MeasurementComputing PCI-DDA series support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -931,6 +927,7 @@ config COMEDI_CB_PCIDDA
 
 config COMEDI_CB_PCIDIO
 	tristate "MeasurementComputing PCI-DIO series support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
@@ -941,6 +938,7 @@ config COMEDI_CB_PCIDIO
 
 config COMEDI_CB_PCIMDAS
 	tristate "MeasurementComputing PCIM-DAS1602/16 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -951,6 +949,7 @@ config COMEDI_CB_PCIMDAS
 
 config COMEDI_CB_PCIMDDA
 	tristate "MeasurementComputing PCIM-DDA06-16 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -1026,6 +1025,7 @@ config COMEDI_NI_670X
 config COMEDI_NI_PCIDIO
 	tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
 	depends on COMEDI_MITE
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
@@ -1058,6 +1058,7 @@ config COMEDI_NI_PCIMIO
 
 config COMEDI_RTD520
 	tristate "Real Time Devices PCI4520/DM7520 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Real Time Devices PCI4520/DM7520
@@ -1097,7 +1098,7 @@ endif # COMEDI_PCI_DRIVERS
 
 menuconfig COMEDI_PCMCIA_DRIVERS
 	tristate "Comedi PCMCIA drivers"
-	depends on COMEDI && PCMCIA && PCCARD
+	depends on COMEDI && (PCMCIA || PCCARD)
 	default N
 	---help---
 	  Enable comedi PCMCIA and PCCARD drivers to be built
@@ -1142,6 +1143,7 @@ config COMEDI_NI_DAQ_700_CS
 config COMEDI_NI_DAQ_DIO24_CS
 	tristate "NI DAQ-Card DIO-24 PCMCIA support"
 	depends on COMEDI_NI_COMMON
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1162,8 +1164,8 @@ config COMEDI_NI_LABPC_CS
 config COMEDI_NI_MIO_CS
 	tristate "NI DAQCard E series PCMCIA support"
 	depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
-	default N
 	select COMEDI_FC
+	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQCard E series
 	  DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
@@ -1265,7 +1267,8 @@ config COMEDI_MITE
 
 config COMEDI_NI_TIO
 	tristate "NI general purpose counter support"
-	select COMEDI_MITE
+	depends on COMEDI_MITE
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments general purpose counters.
@@ -1278,6 +1281,8 @@ config COMEDI_NI_TIO
 
 config COMEDI_NI_LABPC
 	tristate "NI Lab-PC and compatibles ISA and PCI support"
+	depends on COMEDI_MITE
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -1291,8 +1296,40 @@ config COMEDI_NI_LABPC
 
 endif # COMEDI_NI_COMMON
 
+config COMEDI_8255
+	tristate "Generic 8255 support"
+	depends on COMEDI
+	default N
+	---help---
+	  Enable generic 8255 support.
+
+	  You should enable compilation this driver if you plan to use a board
+	  that has an 8255 chip. For multifunction boards, the main driver will
+	  configure the 8255 subdevice automatically.
+
+	  Note that most PCI 8255 boards do NOT work with this driver, and
+	  need a separate driver as a wrapper.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 8255.
+
+config COMEDI_DAS08
+	tristate "DAS-08 compatible support"
+	depends on COMEDI
+	select COMEDI_8255
+	default N
+	---help---
+	  Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
+
+	  Note that PCMCIA DAS08 cards are not directly supported by this
+	  driver, and need a separate driver as a wrapper.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_FC
 	tristate "Comedi shared functions for low-level driver support"
+	depends on COMEDI
 	default N
 	---help---
 	  Enable support for shared functions for low-level drivers.
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index aced00e5cd1..aeb2c00875c 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -83,7 +83,7 @@ static int do_subdinfo_ioctl(struct comedi_device *dev,
 static int do_chaninfo_ioctl(struct comedi_device *dev,
 			     struct comedi_chaninfo __user *arg);
 static int do_bufinfo_ioctl(struct comedi_device *dev,
-			    struct comedi_bufinfo __user *arg);
+			    struct comedi_bufinfo __user *arg, void *file);
 static int do_cmd_ioctl(struct comedi_device *dev,
 			struct comedi_cmd __user *arg, void *file);
 static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg,
@@ -169,7 +169,8 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
 		break;
 	case COMEDI_BUFINFO:
 		rc = do_bufinfo_ioctl(dev,
-				      (struct comedi_bufinfo __user *)arg);
+				      (struct comedi_bufinfo __user *)arg,
+				      file);
 		break;
 	case COMEDI_LOCK:
 		rc = do_lock_ioctl(dev, arg, file);
@@ -563,7 +564,7 @@ static int do_chaninfo_ioctl(struct comedi_device *dev,
 
   */
 static int do_bufinfo_ioctl(struct comedi_device *dev,
-			    struct comedi_bufinfo __user *arg)
+			    struct comedi_bufinfo __user *arg, void *file)
 {
 	struct comedi_bufinfo bi;
 	struct comedi_subdevice *s;
@@ -576,6 +577,10 @@ static int do_bufinfo_ioctl(struct comedi_device *dev,
 		return -EINVAL;
 
 	s = dev->subdevices + bi.subdevice;
+
+	if (s->lock && s->lock != file)
+		return -EACCES;
+
 	async = s->async;
 
 	if (!async) {
@@ -584,8 +589,17 @@ static int do_bufinfo_ioctl(struct comedi_device *dev,
 		bi.buf_read_ptr = 0;
 		bi.buf_write_count = 0;
 		bi.buf_read_count = 0;
+		bi.bytes_read = 0;
+		bi.bytes_written = 0;
 		goto copyback;
 	}
+	if (!s->busy) {
+		bi.bytes_read = 0;
+		bi.bytes_written = 0;
+		goto copyback_position;
+	}
+	if (s->busy != file)
+		return -EACCES;
 
 	if (bi.bytes_read && (s->subdev_flags & SDF_CMD_READ)) {
 		bi.bytes_read = comedi_buf_read_alloc(async, bi.bytes_read);
@@ -604,6 +618,7 @@ static int do_bufinfo_ioctl(struct comedi_device *dev,
 		comedi_buf_write_free(async, bi.bytes_written);
 	}
 
+copyback_position:
 	bi.buf_write_count = async->buf_write_count;
 	bi.buf_write_ptr = async->buf_write_ptr;
 	bi.buf_read_count = async->buf_read_count;
@@ -1576,6 +1591,19 @@ static ssize_t comedi_write(struct file *file, const char __user *buf,
 	while (nbytes > 0 && !retval) {
 		set_current_state(TASK_INTERRUPTIBLE);
 
+		if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
+			if (count == 0) {
+				if (comedi_get_subdevice_runflags(s) &
+					SRF_ERROR) {
+					retval = -EPIPE;
+				} else {
+					retval = 0;
+				}
+				do_become_nonbusy(dev, s);
+			}
+			break;
+		}
+
 		n = nbytes;
 
 		m = n;
@@ -1588,16 +1616,6 @@ static ssize_t comedi_write(struct file *file, const char __user *buf,
 			n = m;
 
 		if (n == 0) {
-			if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
-				if (comedi_get_subdevice_runflags(s) &
-				    SRF_ERROR) {
-					retval = -EPIPE;
-				} else {
-					retval = 0;
-				}
-				do_become_nonbusy(dev, s);
-				break;
-			}
 			if (file->f_flags & O_NONBLOCK) {
 				retval = -EAGAIN;
 				break;
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 5ccf246e252..354fb7d2984 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_COMEDI_SERIAL2002)		+= serial2002.o
 obj-$(CONFIG_COMEDI_SKEL)		+= skel.o
 
 # Comedi ISA drivers
-obj-$(CONFIG_COMEDI_8255)		+= 8255.o
 obj-$(CONFIG_COMEDI_ACL7225B)		+= acl7225b.o
 obj-$(CONFIG_COMEDI_PCL711)		+= pcl711.o
 obj-$(CONFIG_COMEDI_PCL724)		+= pcl724.o
@@ -26,7 +25,6 @@ obj-$(CONFIG_COMEDI_PCM3724)		+= pcm3724.o
 obj-$(CONFIG_COMEDI_PCM3730)		+= pcm3730.o
 obj-$(CONFIG_COMEDI_RTI800)		+= rti800.o
 obj-$(CONFIG_COMEDI_RTI802)		+= rti802.o
-obj-$(CONFIG_COMEDI_DAS08)		+= das08.o
 obj-$(CONFIG_COMEDI_DAS16M1)		+= das16m1.o
 obj-$(CONFIG_COMEDI_DAS16)		+= das16.o
 obj-$(CONFIG_COMEDI_DAS800)		+= das800.o
@@ -135,4 +133,6 @@ obj-$(CONFIG_COMEDI_NI_TIO)		+= ni_tio.o
 obj-$(CONFIG_COMEDI_NI_TIO)		+= ni_tiocmd.o
 obj-$(CONFIG_COMEDI_NI_LABPC)		+= ni_labpc.o
 
+obj-$(CONFIG_COMEDI_8255)		+= 8255.o
+obj-$(CONFIG_COMEDI_DAS08)		+= das08.o
 obj-$(CONFIG_COMEDI_FC)			+= comedi_fc.o
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 2c986413a81..b18e81d8cf8 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -68,6 +68,10 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #include "addi_common.h"
 #include "addi_amcc_s5933.h"
 
+#ifndef ADDIDATA_DRIVER_NAME
+#define ADDIDATA_DRIVER_NAME	"addi_common"
+#endif
+
 /* Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>"); */
 /* Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); */
 /* Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); */
@@ -2528,7 +2532,7 @@ static const struct addi_board boardtypes[] = {
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
 
 static struct comedi_driver driver_addi = {
-	.driver_name = "addi_common",
+	.driver_name = ADDIDATA_DRIVER_NAME,
 	.module = THIS_MODULE,
 	.attach = i_ADDI_Attach,
 	.detach = i_ADDI_Detach,
@@ -2570,10 +2574,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct pcilst_struct *card = NULL;
 	unsigned char pci_bus, pci_slot, pci_func;
 	int i_Dma = 0;
-	static char c_Identifier[150];
-
-	sprintf(c_Identifier, "Addi-Data GmbH Comedi %s",
-		this_board->pc_DriverName);
 
 	ret = alloc_private(dev, sizeof(struct addi_private));
 	if (ret < 0)
@@ -2583,7 +2583,7 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		v_pci_card_list_init(this_board->i_VendorId, 1);	/* 1 for displaying the list.. */
 		pci_list_builded = 1;
 	}
-	/* printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
+	/* printk("comedi%d: "ADDIDATA_DRIVER_NAME": board=%s",dev->minor,this_board->pc_DriverName); */
 
 	if ((this_board->i_Dma) && (it->options[2] == 0)) {
 		i_Dma = 1;
@@ -2648,7 +2648,7 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	if (irq > 0) {
 		if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
-				c_Identifier, dev) < 0) {
+				this_board->pc_DriverName, dev) < 0) {
 			printk(", unable to allocate IRQ %u, DISABLING IT",
 				irq);
 			irq = 0;	/* Can't use IRQ */
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index da454e854c4..6dfcbe803f2 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -2,4 +2,6 @@
 
 #define ADDIDATA_WATCHDOG 2	/*  Or shold it be something else */
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_035"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index fa2056e8aa0..4722ec834f7 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1032 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1032"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index 7a5cae599ef..db3dafdcf69 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1500 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1500"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 8d414844009..f591baff6a0 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1516 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1516"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 0351cdde102..6f5c923ac22 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1564 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1564"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 50679904129..1d926add9e6 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_16XX 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_16xx"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c
index c433445913d..df6ba8ccf56 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1710.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1710.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1710 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1710"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2016.c b/drivers/staging/comedi/drivers/addi_apci_2016.c
index 271c47c8cad..7266e412f0a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2016.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2016.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2016 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2016"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 5108ea2a392..f67da94119e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2032 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2032"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index e439f835cf4..bc7f7d65350 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2200 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2200"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3001.c b/drivers/staging/comedi/drivers/addi_apci_3001.c
index df97c305828..d86c4209cb9 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3001.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3001.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3001 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3001"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index 9183125ddde..0b22cf10415 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3120 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3120"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c
index f25a70b3290..159313997dc 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3200.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3200 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3200"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3300.c b/drivers/staging/comedi/drivers/addi_apci_3300.c
index 1ee4778ad45..733c69abc43 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3300.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3300.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3300 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3300"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index 1049e20237e..d8a01b154e3 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3501 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3501"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index fb9deb7083b..942bc9e259a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3XXX 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3xxx"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 36a254cd441..39d112b708e 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -824,9 +824,12 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
 		plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
 					  false, true, true);
 
-		dev_private->scan_delay =
-		    (async_cmd->scan_begin_arg / (async_cmd->convert_arg *
-						  async_cmd->chanlist_len)) - 1;
+		if (async_cmd->scan_begin_src == TRIG_TIMER) {
+			dev_private->scan_delay =
+				(async_cmd->scan_begin_arg /
+				 (async_cmd->convert_arg *
+				  async_cmd->chanlist_len)) - 1;
+		}
 
 		break;
 
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 40eeecf5347..e424a0c7d34 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -7,17 +7,17 @@
 */
 /*
 Driver: adv_pci_dio
-Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1736UP,
-             PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754,
-             PCI-1756, PCI-1762
+Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1735U,
+             PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E,
+             PCI-1754, PCI-1756, PCI-1762
 Author: Michal Dobes <dobes@tesnet.cz>
 Devices: [Advantech] PCI-1730 (adv_pci_dio), PCI-1733,
-  PCI-1734, PCI-1736UP, PCI-1750,
+  PCI-1734, PCI-1735U, PCI-1736UP, PCI-1750,
   PCI-1751, PCI-1752, PCI-1753,
   PCI-1753+PCI-1753E, PCI-1754, PCI-1756,
   PCI-1760, PCI-1762
 Status: untested
-Updated: Mon, 14 Apr 2008 10:43:08 +0100
+Updated: Tue, 04 May 2010 13:00:00 +0000
 
 This driver supports now only insn interface for DI/DO/DIO.
 
@@ -35,6 +35,7 @@ Configuration options:
 
 #include "comedi_pci.h"
 #include "8255.h"
+#include "8253.h"
 
 #undef PCI_DIO_EXTDEBUG		/* if defined, enable extensive debug logging */
 
@@ -49,7 +50,7 @@ Configuration options:
 
 /* hardware types of the cards */
 enum hw_cards_id {
-	TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1736,
+	TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1735, TYPE_PCI1736,
 	TYPE_PCI1750,
 	TYPE_PCI1751,
 	TYPE_PCI1752,
@@ -67,7 +68,10 @@ enum hw_io_access {
 #define MAX_DI_SUBDEVS	2	/* max number of DI subdevices per card */
 #define MAX_DO_SUBDEVS	2	/* max number of DO subdevices per card */
 #define MAX_DIO_SUBDEVG	2	/* max number of DIO subdevices group per card */
+#define MAX_8254_SUBDEVS   1	/* max number of 8254 counter subdevs per card */
+				/* (could be more than one 8254 per subdevice) */
 
+#define SIZE_8254	   4	/* 8254 IO space length */
 #define SIZE_8255	   4	/* 8255 IO space length */
 
 #define PCIDIO_MAINREG	   2	/* main I/O region for all Advantech cards? */
@@ -85,6 +89,12 @@ enum hw_io_access {
 #define PCI1734_IDO	   0	/* W:   Isolated digital output 0-31 */
 #define PCI173x_BOARDID	   4	/* R:   Board I/D switch for 1730/3/4 */
 
+/* Advantech PCI-1735U */
+#define PCI1735_DI	   0	/* R:   Digital input  0-31 */
+#define PCI1735_DO	   0	/* W:   Digital output 0-31 */
+#define PCI1735_C8254	   4	/* R/W: 8254 counter */
+#define PCI1735_BOARDID	   8    /* R:   Board I/D switch for 1735U */
+
 /*  Advantech PCI-1736UP */
 #define PCI1736_IDI        0	/* R:   Isolated digital input  0-15 */
 #define PCI1736_IDO        0	/* W:   Isolated digital output 0-15 */
@@ -192,7 +202,8 @@ static int pci_dio_detach(struct comedi_device *dev);
 struct diosubd_data {
 	int chans;		/*  num of chans */
 	int addr;		/*  PCI address ofset */
-	int regs;		/*  number of registers to read or 8255 subdevices */
+	int regs;		/*  number of registers to read or 8255
+				    subdevices or 8254 chips */
 	unsigned int specflags;	/*  addon subdevice flags */
 };
 
@@ -206,6 +217,7 @@ struct dio_boardtype {
 	struct diosubd_data sdo[MAX_DO_SUBDEVS];	/*  DO chans */
 	struct diosubd_data sdio[MAX_DIO_SUBDEVG];	/*  DIO 8255 chans */
 	struct diosubd_data boardid;	/*  card supports board ID switch */
+	struct diosubd_data s8254[MAX_8254_SUBDEVS];	/* 8254 subdevices */
 	enum hw_io_access io_access;
 };
 
@@ -214,6 +226,7 @@ static DEFINE_PCI_DEVICE_TABLE(pci_dio_pci_table) = {
 	PCI_VENDOR_ID_ADVANTECH, 0x1730, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1733, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1734, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+	PCI_VENDOR_ID_ADVANTECH, 0x1735, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
@@ -235,14 +248,15 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{16, PCI1730_DO, 2, 0}, {16, PCI1730_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
-	 IO_8b,
-	 },
+	 {{0, 0, 0, 0}},
+	 IO_8b},
 	{"pci1733", PCI_VENDOR_ID_ADVANTECH, 0x1733, PCIDIO_MAINREG,
 	 TYPE_PCI1733,
 	 {{0, 0, 0, 0}, {32, PCI1733_IDI, 4, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1734", PCI_VENDOR_ID_ADVANTECH, 0x1734, PCIDIO_MAINREG,
 	 TYPE_PCI1734,
@@ -250,6 +264,15 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {32, PCI1734_IDO, 4, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
+	 IO_8b},
+	{"pci1735", PCI_VENDOR_ID_ADVANTECH, 0x1735, PCIDIO_MAINREG,
+	 TYPE_PCI1735,
+	 {{32, PCI1735_DI, 4, 0}, {0, 0, 0, 0}},
+	 {{32, PCI1735_DO, 4, 0}, {0, 0, 0, 0}},
+	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { 4, PCI1735_BOARDID, 1, SDF_INTERNAL},
+	 {{3, PCI1735_C8254, 1, 0}},
 	 IO_8b},
 	{"pci1736", PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI1736_MAINREG,
 	 TYPE_PCI1736,
@@ -257,14 +280,15 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {16, PCI1736_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI1736_BOARDID, 1, SDF_INTERNAL},
-	 IO_8b,
-	 },
+	 {{0, 0, 0, 0}},
+	 IO_8b},
 	{"pci1750", PCI_VENDOR_ID_ADVANTECH, 0x1750, PCIDIO_MAINREG,
 	 TYPE_PCI1750,
 	 {{0, 0, 0, 0}, {16, PCI1750_IDI, 2, 0}},
 	 {{0, 0, 0, 0}, {16, PCI1750_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1751", PCI_VENDOR_ID_ADVANTECH, 0x1751, PCIDIO_MAINREG,
 	 TYPE_PCI1751,
@@ -272,6 +296,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{48, PCI1751_DIO, 2, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1752", PCI_VENDOR_ID_ADVANTECH, 0x1752, PCIDIO_MAINREG,
 	 TYPE_PCI1752,
@@ -279,6 +304,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{32, PCI1752_IDO, 2, 0}, {32, PCI1752_IDO2, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1753", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753,
@@ -286,6 +312,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{96, PCI1753_DIO, 4, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1753e", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753E,
@@ -293,6 +320,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{96, PCI1753_DIO, 4, 0}, {96, PCI1753E_DIO, 4, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1754", PCI_VENDOR_ID_ADVANTECH, 0x1754, PCIDIO_MAINREG,
 	 TYPE_PCI1754,
@@ -300,6 +328,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1756", PCI_VENDOR_ID_ADVANTECH, 0x1756, PCIDIO_MAINREG,
 	 TYPE_PCI1756,
@@ -307,6 +336,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {32, PCI1756_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1760", PCI_VENDOR_ID_ADVANTECH, 0x1760, 0,
 	 TYPE_PCI1760,
@@ -314,6 +344,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1762", PCI_VENDOR_ID_ADVANTECH, 0x1762, PCIDIO_MAINREG,
 	 TYPE_PCI1762,
@@ -321,6 +352,7 @@ static const struct dio_boardtype boardtypes[] = {
 	 {{0, 0, 0, 0}, {16, PCI1762_RO, 1, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI1762_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b}
 };
 
@@ -440,6 +472,83 @@ static int pci_dio_insn_bits_do_w(struct comedi_device *dev,
 /*
 ==============================================================================
 */
+static int pci_8254_insn_read(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	spin_lock_irqsave(&s->spin_lock, flags);
+	data[0] = i8254_read(dev->iobase + d->addr + (SIZE_8254 * chip),
+			0, chipchan);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_write(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	spin_lock_irqsave(&s->spin_lock, flags);
+	i8254_write(dev->iobase + d->addr + (SIZE_8254 * chip),
+			0, chipchan, data[0]);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_config(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long iobase;
+	int ret = 0;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	iobase = dev->iobase + d->addr + (SIZE_8254 * chip);
+	spin_lock_irqsave(&s->spin_lock, flags);
+	switch (data[0]) {
+	case INSN_CONFIG_SET_COUNTER_MODE:
+		ret = i8254_set_mode(iobase, 0, chipchan, data[1]);
+		if (ret < 0)
+			ret = -EINVAL;
+		break;
+	case INSN_CONFIG_8254_READ_STATUS:
+		data[1] = i8254_status(iobase, 0, chipchan);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return ret < 0 ? ret : insn->n;
+}
+
+/*
+==============================================================================
+*/
 static int pci1760_unchecked_mbxrequest(struct comedi_device *dev,
 					unsigned char *omb, unsigned char *imb,
 					int repeats)
@@ -708,6 +817,15 @@ static int pci_dio_reset(struct comedi_device *dev)
 		outb(0, dev->iobase + PCI1734_IDO + 2);
 		outb(0, dev->iobase + PCI1734_IDO + 3);
 		break;
+	case TYPE_PCI1735:
+		outb(0, dev->iobase + PCI1735_DO);	/*  clear outputs */
+		outb(0, dev->iobase + PCI1735_DO + 1);
+		outb(0, dev->iobase + PCI1735_DO + 2);
+		outb(0, dev->iobase + PCI1735_DO + 3);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 0, I8254_MODE0);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 1, I8254_MODE0);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 2, I8254_MODE0);
+		break;
 
 	case TYPE_PCI1736:
 		outb(0, dev->iobase + PCI1736_IDO);
@@ -877,6 +995,26 @@ static int pci_dio_add_do(struct comedi_device *dev, struct comedi_subdevice *s,
 /*
 ==============================================================================
 */
+static int pci_dio_add_8254(struct comedi_device *dev,
+			    struct comedi_subdevice * s,
+			    const struct diosubd_data *d, int subdev)
+{
+	s->type = COMEDI_SUBD_COUNTER;
+	s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+	s->n_chan = d->chans;
+	s->maxdata = 65535;
+	s->len_chanlist = d->chans;
+	s->insn_read = pci_8254_insn_read;
+	s->insn_write = pci_8254_insn_write;
+	s->insn_config = pci_8254_insn_config;
+	s->private = (void *)d;
+
+	return 0;
+}
+
+/*
+==============================================================================
+*/
 static int CheckAndAllocCard(struct comedi_device *dev,
 			     struct comedi_devconfig *it,
 			     struct pci_dev *pcidev)
@@ -979,6 +1117,9 @@ static int pci_dio_attach(struct comedi_device *dev,
 			n_subdevices += this_board->sdio[i].regs;
 		if (this_board->boardid.chans)
 			n_subdevices++;
+		for (i = 0; i < MAX_8254_SUBDEVS; i++)
+			if (this_board->s8254[i].chans)
+				n_subdevices++;
 	}
 
 	ret = alloc_subdevices(dev, n_subdevices);
@@ -1022,6 +1163,13 @@ static int pci_dio_attach(struct comedi_device *dev,
 		subdev++;
 	}
 
+	for (i = 0; i < MAX_8254_SUBDEVS; i++)
+		if (this_board->s8254[i].chans) {
+			s = dev->subdevices + subdev;
+			pci_dio_add_8254(dev, s, &this_board->s8254[i], subdev);
+			subdev++;
+		}
+
 	if (this_board->cardtype == TYPE_PCI1760)
 		pci1760_attach(dev, it);
 
@@ -1067,6 +1215,16 @@ static int pci_dio_detach(struct comedi_device *dev)
 			}
 		}
 
+		if (this_board->boardid.chans) {
+			subdev++;
+		}
+
+		for (i = 0; i < MAX_8254_SUBDEVS; i++) {
+			if (this_board->s8254[i].chans) {
+				subdev++;
+			}
+		}
+
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = dev->subdevices + i;
 			s->private = NULL;
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 8eb67651486..bf27617aa62 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -460,6 +460,7 @@ struct dio200_subdev_8254 {
 	int has_clk_gat_sce;
 	unsigned clock_src[3];	/* Current clock sources */
 	unsigned gate_src[3];	/* Current gate sources */
+	spinlock_t spinlock;
 };
 
 struct dio200_subdev_intr {
@@ -1042,8 +1043,11 @@ dio200_subdev_8254_read(struct comedi_device *dev, struct comedi_subdevice *s,
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	data[0] = i8254_read(subpriv->iobase, 0, chan);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	return 1;
 }
@@ -1057,8 +1061,11 @@ dio200_subdev_8254_write(struct comedi_device *dev, struct comedi_subdevice *s,
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	i8254_write(subpriv->iobase, 0, chan, data[0]);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	return 1;
 }
@@ -1151,14 +1158,16 @@ dio200_subdev_8254_config(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
-	int ret;
+	int ret = 0;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	switch (data[0]) {
 	case INSN_CONFIG_SET_COUNTER_MODE:
 		ret = i8254_set_mode(subpriv->iobase, 0, chan, data[1]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_8254_READ_STATUS:
 		data[1] = i8254_status(subpriv->iobase, 0, chan);
@@ -1166,30 +1175,35 @@ dio200_subdev_8254_config(struct comedi_device *dev, struct comedi_subdevice *s,
 	case INSN_CONFIG_SET_GATE_SRC:
 		ret = dio200_set_gate_src(subpriv, chan, data[2]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_GET_GATE_SRC:
 		ret = dio200_get_gate_src(subpriv, chan);
-		if (ret < 0)
-			return -EINVAL;
+		if (ret < 0) {
+			ret = -EINVAL;
+			break;
+		}
 		data[2] = ret;
 		break;
 	case INSN_CONFIG_SET_CLOCK_SRC:
 		ret = dio200_set_clock_src(subpriv, chan, data[1]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_GET_CLOCK_SRC:
 		ret = dio200_get_clock_src(subpriv, chan, &data[2]);
-		if (ret < 0)
-			return -EINVAL;
+		if (ret < 0) {
+			ret = -EINVAL;
+			break;
+		}
 		data[1] = ret;
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 		break;
 	}
-	return insn->n;
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	return ret < 0 ? ret : insn->n;
 }
 
 /*
@@ -1222,6 +1236,7 @@ dio200_subdev_8254_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	s->insn_write = dio200_subdev_8254_write;
 	s->insn_config = dio200_subdev_8254_config;
 
+	spin_lock_init(&subpriv->spinlock);
 	subpriv->iobase = offset + iobase;
 	subpriv->has_clk_gat_sce = has_clk_gat_sce;
 	if (has_clk_gat_sce) {
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 81829d6fd28..c374bee2506 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -52,7 +52,6 @@ Please report success/failure with other different cards to
 #include "8255.h"
 
 #define PCI_VENDOR_ID_CB	0x1307	/*  PCI vendor number of ComputerBoards */
-#define N_BOARDS	10	/*  Number of boards in cb_pcidda_boards */
 #define EEPROM_SIZE	128	/*  number of entries in eeprom */
 #define MAX_AO_CHANNELS 8	/*  maximum number of ao channels for supported boards */
 
@@ -307,7 +306,7 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 					continue;
 				}
 			}
-			for (index = 0; index < N_BOARDS; index++) {
+			for (index = 0; index < ARRAY_SIZE(cb_pcidda_boards); index++) {
 				if (cb_pcidda_boards[index].device_id ==
 				    pcidev->device) {
 					goto found;
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index cedb02d40f9..3a46f0c0bff 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -123,7 +123,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .adbits = 12,
 	 .ai_fifo_depth = 1024,
 	 .alwaysdither = 0,
-	 .gainlkup = ai_gain_16,
+	 .gainlkup = ai_gain_4,
 	 .ai_speed = 5000,
 	 .n_aochan = 2,
 	 .aobits = 12,
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 86f035d0067..27b4cb2e2ec 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -351,8 +351,7 @@ static int usbdux_ai_stop(struct usbduxsub *this_usbduxsub, int do_unlink)
 	int ret = 0;
 
 	if (!this_usbduxsub) {
-		dev_err(&this_usbduxsub->interface->dev,
-			"comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
+		pr_err("comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
 		return -EFAULT;
 	}
 	dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ai_stop\n");
diff --git a/drivers/staging/cx25821/Makefile b/drivers/staging/cx25821/Makefile
index 10f87f05d8e..d0eb16eac09 100644
--- a/drivers/staging/cx25821/Makefile
+++ b/drivers/staging/cx25821/Makefile
@@ -1,9 +1,8 @@
-cx25821-objs	:= cx25821-core.o cx25821-cards.o cx25821-i2c.o cx25821-gpio.o 				\
-				cx25821-medusa-video.o cx25821-video.o cx25821-video0.o cx25821-video1.o    \
-				cx25821-video2.o cx25821-video3.o cx25821-video4.o cx25821-video5.o         \
-				cx25821-video6.o cx25821-video7.o cx25821-vidups9.o cx25821-vidups10.o      \
-				cx25821-audups11.o cx25821-video-upstream.o cx25821-video-upstream-ch2.o 	\
-				cx25821-audio-upstream.o cx25821-videoioctl.o
+cx25821-objs   := cx25821-core.o cx25821-cards.o cx25821-i2c.o \
+		       cx25821-gpio.o cx25821-medusa-video.o \
+		       cx25821-video.o cx25821-video-upstream.o \
+		       cx25821-video-upstream-ch2.o \
+		       cx25821-audio-upstream.o
 
 obj-$(CONFIG_VIDEO_CX25821) += cx25821.o
 obj-$(CONFIG_VIDEO_CX25821_ALSA) += cx25821-alsa.o
diff --git a/drivers/staging/cx25821/cx25821-alsa.c b/drivers/staging/cx25821/cx25821-alsa.c
index 1798975a69b..a43b18816fa 100644
--- a/drivers/staging/cx25821/cx25821-alsa.c
+++ b/drivers/staging/cx25821/cx25821-alsa.c
@@ -55,6 +55,12 @@
 static struct snd_card *snd_cx25821_cards[SNDRV_CARDS];
 static int devno;
 
+struct cx25821_audio_buffer {
+	unsigned int bpl;
+	struct btcx_riscmem risc;
+	struct videobuf_dmabuf dma;
+};
+
 struct cx25821_audio_dev {
 	struct cx25821_dev *dev;
 	struct cx25821_dmaqueue q;
@@ -77,7 +83,7 @@ struct cx25821_audio_dev {
 
 	struct videobuf_dmabuf *dma_risc;
 
-	struct cx25821_buffer *buf;
+	struct cx25821_audio_buffer *buf;
 
 	struct snd_pcm_substream *substream;
 };
@@ -136,7 +142,7 @@ MODULE_PARM_DESC(debug, "enable debug messages");
 
 static int _cx25821_start_audio_dma(struct cx25821_audio_dev *chip)
 {
-	struct cx25821_buffer *buf = chip->buf;
+	struct cx25821_audio_buffer *buf = chip->buf;
 	struct cx25821_dev *dev = chip->dev;
 	struct sram_channel *audio_ch =
 	    &cx25821_sram_channels[AUDIO_SRAM_CHANNEL];
@@ -331,7 +337,7 @@ static int dsp_buffer_free(struct cx25821_audio_dev *chip)
 	BUG_ON(!chip->dma_size);
 
 	dprintk(2, "Freeing buffer\n");
-	videobuf_sg_dma_unmap(&chip->pci->dev, chip->dma_risc);
+	videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc);
 	videobuf_dma_free(chip->dma_risc);
 	btcx_riscmem_free(chip->pci, &chip->buf->risc);
 	kfree(chip->buf);
@@ -432,7 +438,7 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
 	struct cx25821_audio_dev *chip = snd_pcm_substream_chip(substream);
 	struct videobuf_dmabuf *dma;
 
-	struct cx25821_buffer *buf;
+	struct cx25821_audio_buffer *buf;
 	int ret;
 
 	if (substream->runtime->dma_area) {
@@ -447,36 +453,31 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
 	BUG_ON(!chip->dma_size);
 	BUG_ON(chip->num_periods & (chip->num_periods - 1));
 
-	buf = videobuf_sg_alloc(sizeof(*buf));
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
 	if (NULL == buf)
 		return -ENOMEM;
 
 	if (chip->period_size > AUDIO_LINE_SIZE)
 		chip->period_size = AUDIO_LINE_SIZE;
 
-	buf->vb.memory = V4L2_MEMORY_MMAP;
-	buf->vb.field = V4L2_FIELD_NONE;
-	buf->vb.width = chip->period_size;
 	buf->bpl = chip->period_size;
-	buf->vb.height = chip->num_periods;
-	buf->vb.size = chip->dma_size;
 
-	dma = videobuf_to_dma(&buf->vb);
+	dma = &buf->dma;
 	videobuf_dma_init(dma);
-
 	ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
-				       (PAGE_ALIGN(buf->vb.size) >>
+				       (PAGE_ALIGN(chip->dma_size) >>
 					PAGE_SHIFT));
 	if (ret < 0)
 		goto error;
 
-	ret = videobuf_sg_dma_map(&chip->pci->dev, dma);
+	ret = videobuf_dma_map(&chip->pci->dev, dma);
 	if (ret < 0)
 		goto error;
 
 	ret =
 	    cx25821_risc_databuffer_audio(chip->pci, &buf->risc, dma->sglist,
-					  buf->vb.width, buf->vb.height, 1);
+					  chip->period_size, chip->num_periods,
+					  1);
 	if (ret < 0) {
 		printk(KERN_INFO
 			"DEBUG: ERROR after cx25821_risc_databuffer_audio()\n");
@@ -488,12 +489,10 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
 	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
 	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
 
-	buf->vb.state = VIDEOBUF_PREPARED;
-
 	chip->buf = buf;
 	chip->dma_risc = dma;
 
-	substream->runtime->dma_area = chip->dma_risc->vmalloc;
+	substream->runtime->dma_area = chip->dma_risc->vaddr;
 	substream->runtime->dma_bytes = chip->dma_size;
 	substream->runtime->dma_addr = 0;
 
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.c b/drivers/staging/cx25821/cx25821-audio-upstream.c
index eb39d13f7d7..cdff49f409f 100644
--- a/drivers/staging/cx25821/cx25821-audio-upstream.c
+++ b/drivers/staging/cx25821/cx25821-audio-upstream.c
@@ -106,7 +106,7 @@ static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev,
 {
 	unsigned int line;
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[dev->_audio_upstream_channel_select];
+	   dev->channels[dev->_audio_upstream_channel_select].sram_channels;
 	int offset = 0;
 
 	/* scan lines */
@@ -217,7 +217,7 @@ void cx25821_free_memory_audio(struct cx25821_dev *dev)
 void cx25821_stop_upstream_audio(struct cx25821_dev *dev)
 {
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B];
+	   dev->channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B].sram_channels;
 	u32 tmp = 0;
 
 	if (!dev->_audio_is_running) {
@@ -287,14 +287,14 @@ int cx25821_get_audio_data(struct cx25821_dev *dev,
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk("%s: File has no file operations registered!\n",
+			printk(KERN_ERR "%s: File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk("%s: File has no READ operations registered!\n",
+			printk(KERN_ERR "%s: File has no READ operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -353,8 +353,9 @@ static void cx25821_audioups_handler(struct work_struct *work)
 	}
 
 	cx25821_get_audio_data(dev,
-			       &dev->sram_channels[dev->
-						   _audio_upstream_channel_select]);
+			      dev->channels[dev->
+				       _audio_upstream_channel_select].
+				       sram_channels);
 }
 
 int cx25821_openfile_audio(struct cx25821_dev *dev,
@@ -378,14 +379,14 @@ int cx25821_openfile_audio(struct cx25821_dev *dev,
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk("%s: File has no file operations registered!\n",
+			printk(KERN_ERR "%s: File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk("%s: File has no READ operations registered!\n",
+			printk(KERN_ERR "%s: File has no READ operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -505,7 +506,7 @@ int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 {
 	int i = 0;
 	u32 int_msk_tmp;
-	struct sram_channel *channel = &dev->sram_channels[chan_num];
+       struct sram_channel *channel = dev->channels[chan_num].sram_channels;
 	dma_addr_t risc_phys_jump_addr;
 	__le32 *rp;
 
@@ -569,15 +570,15 @@ int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 		spin_unlock(&dev->slock);
 	} else {
 		if (status & FLD_AUD_SRC_OF)
-			printk("%s: Audio Received Overflow Error Interrupt!\n",
+			printk(KERN_WARNING "%s: Audio Received Overflow Error Interrupt!\n",
 			       __func__);
 
 		if (status & FLD_AUD_SRC_SYNC)
-			printk("%s: Audio Received Sync Error Interrupt!\n",
+			printk(KERN_WARNING "%s: Audio Received Sync Error Interrupt!\n",
 			       __func__);
 
 		if (status & FLD_AUD_SRC_OPC_ERR)
-			printk("%s: Audio Received OpCode Error Interrupt!\n",
+			printk(KERN_WARNING "%s: Audio Received OpCode Error Interrupt!\n",
 			       __func__);
 
 		/* Read and write back the interrupt status register to clear
@@ -586,7 +587,7 @@ int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 	}
 
 	if (dev->_audiofile_status == END_OF_FILE) {
-		printk("cx25821: EOF Channel Audio Framecount = %d\n",
+		printk(KERN_WARNING "cx25821: EOF Channel Audio Framecount = %d\n",
 		       dev->_audioframe_count);
 		return -1;
 	}
@@ -607,7 +608,8 @@ static irqreturn_t cx25821_upstream_irq_audio(int irq, void *dev_id)
 	if (!dev)
 		return -1;
 
-	sram_ch = &dev->sram_channels[dev->_audio_upstream_channel_select];
+       sram_ch = dev->channels[dev->_audio_upstream_channel_select].
+				       sram_channels;
 
 	msk_stat = cx_read(sram_ch->int_mstat);
 	audio_status = cx_read(sram_ch->int_stat);
@@ -644,8 +646,8 @@ static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
 
 		/* 10 millisecond timeout */
 		if (count++ > 1000) {
-			printk
-			    ("cx25821 ERROR: %s() fifo is NOT turned on. Timeout!\n",
+			printk(KERN_ERR
+			       "cx25821 ERROR: %s() fifo is NOT turned on. Timeout!\n",
 			     __func__);
 			return;
 		}
@@ -726,12 +728,12 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
 	int str_length = 0;
 
 	if (dev->_audio_is_running) {
-		printk("Audio Channel is still running so return!\n");
+		printk(KERN_WARNING "Audio Channel is still running so return!\n");
 		return 0;
 	}
 
 	dev->_audio_upstream_channel_select = channel_select;
-	sram_ch = &dev->sram_channels[channel_select];
+       sram_ch = dev->channels[channel_select].sram_channels;
 
 	/* Work queue */
 	INIT_WORK(&dev->_audio_work_entry, cx25821_audioups_handler);
diff --git a/drivers/staging/cx25821/cx25821-audio.h b/drivers/staging/cx25821/cx25821-audio.h
index 503f42f036a..434b2a312a8 100644
--- a/drivers/staging/cx25821/cx25821-audio.h
+++ b/drivers/staging/cx25821/cx25821-audio.h
@@ -27,24 +27,25 @@
 #define LINES_PER_BUFFER            15
 #define AUDIO_LINE_SIZE             128
 
-//Number of buffer programs to use at once.
+/* Number of buffer programs to use at once. */
 #define NUMBER_OF_PROGRAMS  8
 
-//Max size of the RISC program for a buffer. - worst case is 2 writes per line
-// Space is also added for the 4 no-op instructions added on the end.
-
+/*
+  Max size of the RISC program for a buffer. - worst case is 2 writes per line
+  Space is also added for the 4 no-op instructions added on the end.
+*/
 #ifndef USE_RISC_NOOP
 #define MAX_BUFFER_PROGRAM_SIZE     \
     (2*LINES_PER_BUFFER*RISC_WRITE_INSTRUCTION_SIZE + RISC_WRITECR_INSTRUCTION_SIZE*4)
 #endif
 
-// MAE 12 July 2005 Try to use NOOP RISC instruction instead
+/* MAE 12 July 2005 Try to use NOOP RISC instruction instead */
 #ifdef USE_RISC_NOOP
 #define MAX_BUFFER_PROGRAM_SIZE     \
     (2*LINES_PER_BUFFER*RISC_WRITE_INSTRUCTION_SIZE + RISC_NOOP_INSTRUCTION_SIZE*4)
 #endif
 
-//Sizes of various instructions in bytes.  Used when adding instructions.
+/* Sizes of various instructions in bytes.  Used when adding instructions. */
 #define RISC_WRITE_INSTRUCTION_SIZE 12
 #define RISC_JUMP_INSTRUCTION_SIZE  12
 #define RISC_SKIP_INSTRUCTION_SIZE  4
diff --git a/drivers/staging/cx25821/cx25821-audups11.c b/drivers/staging/cx25821/cx25821-audups11.c
deleted file mode 100644
index e49ead982f3..00000000000
--- a/drivers/staging/cx25821/cx25821-audups11.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/slab.h>
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH11];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH11]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = 10;
-	fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO11))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO11)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	//cx_write(channel11->dma_ctl, 0);
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO11)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO11);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO11)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO11);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->width = f->fmt.pix.width;
-	fh->height = f->fmt.pix.height;
-	fh->vidq.field = f->fmt.pix.field;
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-	return 0;
-}
-
-static long video_ioctl_upstream11(struct file *file, unsigned int cmd,
-				   unsigned long arg)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-	int command = 0;
-	struct upstream_user_struct *data_from_user;
-
-	data_from_user = (struct upstream_user_struct *)arg;
-
-	if (!data_from_user) {
-		printk
-		    ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		     __func__);
-		return 0;
-	}
-
-	command = data_from_user->command;
-
-	if (command != UPSTREAM_START_AUDIO && command != UPSTREAM_STOP_AUDIO) {
-		return 0;
-	}
-
-	dev->input_filename = data_from_user->input_filename;
-	dev->input_audiofilename = data_from_user->input_filename;
-	dev->vid_stdname = data_from_user->vid_stdname;
-	dev->pixel_format = data_from_user->pixel_format;
-	dev->channel_select = data_from_user->channel_select;
-	dev->command = data_from_user->command;
-
-	switch (command) {
-	case UPSTREAM_START_AUDIO:
-		cx25821_start_upstream_audio(dev, data_from_user);
-		break;
-
-	case UPSTREAM_STOP_AUDIO:
-		cx25821_stop_upstream_audio(dev);
-		break;
-	}
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct cx25821_fh *fh = priv;
-	return videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev;
-	int err;
-
-	if (fh) {
-		dev = fh->dev;
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-	return 0;
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl_upstream11,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template11 = {
-	.name = "cx25821-audioupstream",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-core.c b/drivers/staging/cx25821/cx25821-core.c
index d90abb383fc..c487c19256b 100644
--- a/drivers/staging/cx25821/cx25821-core.c
+++ b/drivers/staging/cx25821/cx25821-core.c
@@ -781,14 +781,14 @@ static void cx25821_shutdown(struct cx25821_dev *dev)
 
 	/* Disable Video A/B activity */
 	for (i = 0; i < VID_CHANNEL_NUM; i++) {
-		cx_write(dev->sram_channels[i].dma_ctl, 0);
-		cx_write(dev->sram_channels[i].int_msk, 0);
+	       cx_write(dev->channels[i].sram_channels->dma_ctl, 0);
+	       cx_write(dev->channels[i].sram_channels->int_msk, 0);
 	}
 
 	for (i = VID_UPSTREAM_SRAM_CHANNEL_I; i <= VID_UPSTREAM_SRAM_CHANNEL_J;
 	     i++) {
-		cx_write(dev->sram_channels[i].dma_ctl, 0);
-		cx_write(dev->sram_channels[i].int_msk, 0);
+	       cx_write(dev->channels[i].sram_channels->dma_ctl, 0);
+	       cx_write(dev->channels[i].sram_channels->int_msk, 0);
 	}
 
 	/* Disable Audio activity */
@@ -805,12 +805,10 @@ static void cx25821_shutdown(struct cx25821_dev *dev)
 void cx25821_set_pixel_format(struct cx25821_dev *dev, int channel_select,
 			      u32 format)
 {
-	struct sram_channel *ch;
-
 	if (channel_select <= 7 && channel_select >= 0) {
-		ch = &cx25821_sram_channels[channel_select];
-		cx_write(ch->pix_frmt, format);
-		dev->pixel_formats[channel_select] = format;
+	       cx_write(dev->channels[channel_select].
+			       sram_channels->pix_frmt, format);
+	       dev->channels[channel_select].pixel_formats = format;
 	}
 }
 
@@ -831,7 +829,7 @@ static void cx25821_initialize(struct cx25821_dev *dev)
 	cx_write(PCI_INT_STAT, 0xffffffff);
 
 	for (i = 0; i < VID_CHANNEL_NUM; i++)
-		cx_write(dev->sram_channels[i].int_stat, 0xffffffff);
+	       cx_write(dev->channels[i].sram_channels->int_stat, 0xffffffff);
 
 	cx_write(AUD_A_INT_STAT, 0xffffffff);
 	cx_write(AUD_B_INT_STAT, 0xffffffff);
@@ -845,21 +843,22 @@ static void cx25821_initialize(struct cx25821_dev *dev)
 	mdelay(100);
 
 	for (i = 0; i < VID_CHANNEL_NUM; i++) {
-		cx25821_set_vip_mode(dev, &dev->sram_channels[i]);
-		cx25821_sram_channel_setup(dev, &dev->sram_channels[i], 1440,
-					   0);
-		dev->pixel_formats[i] = PIXEL_FRMT_422;
-		dev->use_cif_resolution[i] = FALSE;
+	       cx25821_set_vip_mode(dev, dev->channels[i].sram_channels);
+	       cx25821_sram_channel_setup(dev, dev->channels[i].sram_channels,
+					       1440, 0);
+	       dev->channels[i].pixel_formats = PIXEL_FRMT_422;
+	       dev->channels[i].use_cif_resolution = FALSE;
 	}
 
 	/* Probably only affect Downstream */
 	for (i = VID_UPSTREAM_SRAM_CHANNEL_I; i <= VID_UPSTREAM_SRAM_CHANNEL_J;
 	     i++) {
-		cx25821_set_vip_mode(dev, &dev->sram_channels[i]);
+	       cx25821_set_vip_mode(dev, dev->channels[i].sram_channels);
 	}
 
-	cx25821_sram_channel_setup_audio(dev, &dev->sram_channels[SRAM_CH08],
-					 128, 0);
+       cx25821_sram_channel_setup_audio(dev,
+			       dev->channels[SRAM_CH08].sram_channels,
+			       128, 0);
 
 	cx25821_gpio_init(dev);
 }
@@ -902,21 +901,6 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 {
 	int io_size = 0, i;
 
-	struct video_device *video_template[] = {
-		&cx25821_video_template0,
-		&cx25821_video_template1,
-		&cx25821_video_template2,
-		&cx25821_video_template3,
-		&cx25821_video_template4,
-		&cx25821_video_template5,
-		&cx25821_video_template6,
-		&cx25821_video_template7,
-		&cx25821_video_template9,
-		&cx25821_video_template10,
-		&cx25821_video_template11,
-		&cx25821_videoioctl_template,
-	};
-
 	printk(KERN_INFO "\n***********************************\n");
 	printk(KERN_INFO "cx25821 set up\n");
 	printk(KERN_INFO "***********************************\n\n");
@@ -947,7 +931,8 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 
 	/* Apply a sensible clock frequency for the PCIe bridge */
 	dev->clk_freq = 28000000;
-	dev->sram_channels = cx25821_sram_channels;
+       for (i = 0; i < MAX_VID_CHANNEL_NUM; i++)
+	       dev->channels[i].sram_channels = &cx25821_sram_channels[i];
 
 	if (dev->nr > 1)
 		CX25821_INFO("dev->nr > 1!");
@@ -970,7 +955,6 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 	dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
 	dev->i2c_bus[0].i2c_period = (0x07 << 24);	/* 1.95MHz */
 
-
 	if (cx25821_get_resources(dev) < 0) {
 		printk(KERN_ERR "%s No more PCIe resources for "
 		       "subsystem: %04x:%04x\n",
@@ -1018,37 +1002,24 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 		     dev->i2c_bus[0].i2c_rc);
 
 	cx25821_card_setup(dev);
-	medusa_video_init(dev);
 
-	for (i = 0; i < VID_CHANNEL_NUM; i++) {
-		if (cx25821_video_register(dev, i, video_template[i]) < 0) {
-			printk(KERN_ERR
-			       "%s() Failed to register analog video adapters on VID channel %d\n",
-			       __func__, i);
-		}
-	}
+       if (medusa_video_init(dev) < 0)
+	       CX25821_ERR("%s() Failed to initialize medusa!\n"
+	       , __func__);
 
-	for (i = VID_UPSTREAM_SRAM_CHANNEL_I;
-	     i <= AUDIO_UPSTREAM_SRAM_CHANNEL_B; i++) {
-		/* Since we don't have template8 for Audio Downstream */
-		if (cx25821_video_register(dev, i, video_template[i - 1]) < 0) {
-			printk(KERN_ERR
-			       "%s() Failed to register analog video adapters for Upstream channel %d.\n",
-			       __func__, i);
-		}
-	}
+       cx25821_video_register(dev);
 
 	/* register IOCTL device */
 	dev->ioctl_dev =
-	    cx25821_vdev_init(dev, dev->pci, video_template[VIDEO_IOCTL_CH],
+	   cx25821_vdev_init(dev, dev->pci, &cx25821_videoioctl_template,
 			      "video");
 
 	if (video_register_device
 	    (dev->ioctl_dev, VFL_TYPE_GRABBER, VIDEO_IOCTL_CH) < 0) {
 		cx25821_videoioctl_unregister(dev);
 		printk(KERN_ERR
-		       "%s() Failed to register video adapter for IOCTL so releasing.\n",
-		       __func__);
+		   "%s() Failed to register video adapter for IOCTL, so \
+		   unregistering videoioctl device.\n", __func__);
 	}
 
 	cx25821_dev_checkrevision(dev);
@@ -1349,7 +1320,7 @@ void cx25821_free_buffer(struct videobuf_queue *q, struct cx25821_buffer *buf)
 
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb, 0, 0);
-	videobuf_dma_unmap(q, dma);
+	videobuf_dma_unmap(q->dev, dma);
 	videobuf_dma_free(dma);
 	btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
@@ -1371,7 +1342,8 @@ static irqreturn_t cx25821_irq(int irq, void *dev_id)
 
 	for (i = 0; i < VID_CHANNEL_NUM; i++) {
 		if (pci_status & mask[i]) {
-			vid_status = cx_read(dev->sram_channels[i].int_stat);
+		       vid_status = cx_read(dev->channels[i].
+			       sram_channels->int_stat);
 
 			if (vid_status)
 				handled +=
diff --git a/drivers/staging/cx25821/cx25821-i2c.c b/drivers/staging/cx25821/cx25821-i2c.c
index 08f45b52df6..e43572e61ec 100644
--- a/drivers/staging/cx25821/cx25821-i2c.c
+++ b/drivers/staging/cx25821/cx25821-i2c.c
@@ -282,6 +282,9 @@ static u32 cx25821_functionality(struct i2c_adapter *adap)
 static struct i2c_algorithm cx25821_i2c_algo_template = {
 	.master_xfer = i2c_xfer,
 	.functionality = cx25821_functionality,
+#ifdef NEED_ALGO_CONTROL
+       .algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_adapter cx25821_i2c_adap_template = {
diff --git a/drivers/staging/cx25821/cx25821-medusa-defines.h b/drivers/staging/cx25821/cx25821-medusa-defines.h
index b0d216ba7f8..60d197f5755 100644
--- a/drivers/staging/cx25821/cx25821-medusa-defines.h
+++ b/drivers/staging/cx25821/cx25821-medusa-defines.h
@@ -23,7 +23,7 @@
 #ifndef _MEDUSA_DEF_H_
 #define _MEDUSA_DEF_H_
 
-// Video deocder that we supported
+/* Video deocder that we supported */
 #define VDEC_A		0
 #define VDEC_B		1
 #define VDEC_C		2
@@ -33,19 +33,10 @@
 #define VDEC_G		6
 #define VDEC_H		7
 
-//#define AUTO_SWITCH_BIT[]  = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-// The following bit position enables automatic source switching for decoder A-H.
-// Display index per camera.
-//#define VDEC_INDEX[] = {0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7};
-
-// Select input bit to video decoder A-H.
-//#define CH_SRC_SEL_BIT[] = {24, 25, 26, 27, 28, 29, 30, 31};
-
-// end of display sequence
+/* end of display sequence */
 #define END_OF_SEQ					0xF;
 
-// registry string size
+/* registry string size */
 #define MAX_REGISTRY_SZ					40;
 
 #endif
diff --git a/drivers/staging/cx25821/cx25821-medusa-reg.h b/drivers/staging/cx25821/cx25821-medusa-reg.h
index 12c90f831b2..f7f33b3e705 100644
--- a/drivers/staging/cx25821/cx25821-medusa-reg.h
+++ b/drivers/staging/cx25821/cx25821-medusa-reg.h
@@ -23,11 +23,11 @@
 #ifndef __MEDUSA_REGISTERS__
 #define __MEDUSA_REGISTERS__
 
-// Serial Slave Registers
+/* Serial Slave Registers */
 #define	HOST_REGISTER1				0x0000
 #define	HOST_REGISTER2				0x0001
 
-// Chip Configuration Registers
+/* Chip Configuration Registers */
 #define	CHIP_CTRL					0x0100
 #define	AFE_AB_CTRL					0x0104
 #define	AFE_CD_CTRL					0x0108
@@ -92,7 +92,7 @@
 #define	ABIST_CLAMP_E				0x01F4
 #define	ABIST_CLAMP_F				0x01F8
 
-//              Digital Video Encoder A Registers
+/*              Digital Video Encoder A Registers */
 #define	DENC_A_REG_1					0x0200
 #define	DENC_A_REG_2					0x0204
 #define	DENC_A_REG_3					0x0208
@@ -102,7 +102,7 @@
 #define	DENC_A_REG_7					0x0218
 #define	DENC_A_REG_8					0x021C
 
-//      Digital Video Encoder B Registers
+/*      Digital Video Encoder B Registers */
 #define	DENC_B_REG_1					0x0300
 #define	DENC_B_REG_2					0x0304
 #define	DENC_B_REG_3					0x0308
@@ -112,7 +112,7 @@
 #define	DENC_B_REG_7					0x0318
 #define	DENC_B_REG_8					0x031C
 
-//              Video Decoder A Registers
+/*              Video Decoder A Registers */
 #define	MODE_CTRL						0x1000
 #define	OUT_CTRL1						0x1004
 #define	OUT_CTRL_NS						0x1008
@@ -153,7 +153,7 @@
 #define	VERSION							0x11F8
 #define	SOFT_RST_CTRL					0x11FC
 
-//      Video Decoder B Registers
+/*      Video Decoder B Registers */
 #define	VDEC_B_MODE_CTRL				0x1200
 #define	VDEC_B_OUT_CTRL1				0x1204
 #define	VDEC_B_OUT_CTRL_NS				0x1208
@@ -194,7 +194,7 @@
 #define	VDEC_B_VERSION					0x13F8
 #define	VDEC_B_SOFT_RST_CTRL			0x13FC
 
-// Video Decoder C Registers
+/* Video Decoder C Registers */
 #define	VDEC_C_MODE_CTRL				0x1400
 #define	VDEC_C_OUT_CTRL1				0x1404
 #define	VDEC_C_OUT_CTRL_NS				0x1408
@@ -235,7 +235,7 @@
 #define	VDEC_C_VERSION					0x15F8
 #define	VDEC_C_SOFT_RST_CTRL			0x15FC
 
-// Video Decoder D Registers
+/* Video Decoder D Registers */
 #define VDEC_D_MODE_CTRL				0x1600
 #define VDEC_D_OUT_CTRL1				0x1604
 #define VDEC_D_OUT_CTRL_NS				0x1608
@@ -276,7 +276,7 @@
 #define VDEC_D_VERSION					0x17F8
 #define VDEC_D_SOFT_RST_CTRL			0x17FC
 
-// Video Decoder E Registers
+/* Video Decoder E Registers */
 #define	VDEC_E_MODE_CTRL				0x1800
 #define	VDEC_E_OUT_CTRL1				0x1804
 #define	VDEC_E_OUT_CTRL_NS				0x1808
@@ -317,7 +317,7 @@
 #define	VDEC_E_VERSION					0x19F8
 #define	VDEC_E_SOFT_RST_CTRL			0x19FC
 
-// Video Decoder F Registers
+/* Video Decoder F Registers */
 #define	VDEC_F_MODE_CTRL				0x1A00
 #define	VDEC_F_OUT_CTRL1				0x1A04
 #define	VDEC_F_OUT_CTRL_NS				0x1A08
@@ -358,7 +358,7 @@
 #define	VDEC_F_VERSION					0x1BF8
 #define	VDEC_F_SOFT_RST_CTRL			0x1BFC
 
-// Video Decoder G Registers
+/* Video Decoder G Registers */
 #define	VDEC_G_MODE_CTRL				0x1C00
 #define	VDEC_G_OUT_CTRL1				0x1C04
 #define	VDEC_G_OUT_CTRL_NS				0x1C08
@@ -399,7 +399,7 @@
 #define	VDEC_G_VERSION					0x1DF8
 #define	VDEC_G_SOFT_RST_CTRL			0x1DFC
 
-//              Video Decoder H Registers
+/*              Video Decoder H Registers  */
 #define	VDEC_H_MODE_CTRL				0x1E00
 #define	VDEC_H_OUT_CTRL1				0x1E04
 #define	VDEC_H_OUT_CTRL_NS				0x1E08
@@ -440,14 +440,14 @@
 #define	VDEC_H_VERSION					0x1FF8
 #define	VDEC_H_SOFT_RST_CTRL			0x1FFC
 
-//*****************************************************************************
-// LUMA_CTRL register fields
+/*****************************************************************************/
+/* LUMA_CTRL register fields */
 #define VDEC_A_BRITE_CTRL				0x1014
 #define VDEC_A_CNTRST_CTRL       		0x1015
 #define VDEC_A_PEAK_SEL          		0x1016
 
-//*****************************************************************************
-// CHROMA_CTRL register fields
+/*****************************************************************************/
+/* CHROMA_CTRL register fields */
 #define VDEC_A_USAT_CTRL         		0x1018
 #define VDEC_A_VSAT_CTRL         		0x1019
 #define VDEC_A_HUE_CTRL          		0x101A
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c
index 34616dc507f..ef9f2b82a86 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.c
+++ b/drivers/staging/cx25821/cx25821-medusa-video.c
@@ -778,9 +778,9 @@ int medusa_set_saturation(struct cx25821_dev *dev, int saturation, int decoder)
 
 int medusa_video_init(struct cx25821_dev *dev)
 {
-	u32 value, tmp = 0;
-	int ret_val;
-	int i;
+       u32 value = 0, tmp = 0;
+       int ret_val = 0;
+       int i = 0;
 
 	mutex_lock(&dev->lock);
 
@@ -790,6 +790,7 @@ int medusa_video_init(struct cx25821_dev *dev)
 	value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp);
 	value &= 0xFFFFF0FF;
 	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value);
+
 	if (ret_val < 0)
 		goto error;
 
@@ -797,6 +798,7 @@ int medusa_video_init(struct cx25821_dev *dev)
 	value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp);
 	value &= 0xFFFFFFDF;
 	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value);
+
 	if (ret_val < 0)
 		goto error;
 
@@ -812,6 +814,7 @@ int medusa_video_init(struct cx25821_dev *dev)
 	value &= 0xFF70FF70;
 	value |= 0x00090008;	/* set en_active */
 	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], DENC_AB_CTRL, value);
+
 	if (ret_val < 0)
 		goto error;
 
@@ -826,8 +829,10 @@ int medusa_video_init(struct cx25821_dev *dev)
 	/* select AFE clock to output mode */
 	value = cx25821_i2c_read(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, &tmp);
 	value &= 0x83FFFFFF;
-	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL,
-				    value | 0x10000000);
+       ret_val =
+	   cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL,
+			     value | 0x10000000);
+
 	if (ret_val < 0)
 		goto error;
 
@@ -849,12 +854,15 @@ int medusa_video_init(struct cx25821_dev *dev)
 
 	value |= 7;
 	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], PIN_OE_CTRL, value);
+
 	if (ret_val < 0)
 		goto error;
 
+
 	mutex_unlock(&dev->lock);
 
 	ret_val = medusa_set_videostandard(dev);
+
 	return ret_val;
 
 error:
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.h b/drivers/staging/cx25821/cx25821-medusa-video.h
index 2fab4b2f251..6175e096185 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.h
+++ b/drivers/staging/cx25821/cx25821-medusa-video.h
@@ -25,7 +25,7 @@
 
 #include "cx25821-medusa-defines.h"
 
-// Color control constants
+/* Color control constants */
 #define VIDEO_PROCAMP_MIN                 0
 #define VIDEO_PROCAMP_MAX                 10000
 #define UNSIGNED_BYTE_MIN                 0
@@ -33,7 +33,7 @@
 #define SIGNED_BYTE_MIN                   -128
 #define SIGNED_BYTE_MAX                   127
 
-// Default video color settings
+/* Default video color settings */
 #define SHARPNESS_DEFAULT                 50
 #define SATURATION_DEFAULT              5000
 #define BRIGHTNESS_DEFAULT              6200
diff --git a/drivers/staging/cx25821/cx25821-reg.h b/drivers/staging/cx25821/cx25821-reg.h
index 7241e7ee3fd..cfe0f32db37 100644
--- a/drivers/staging/cx25821/cx25821-reg.h
+++ b/drivers/staging/cx25821/cx25821-reg.h
@@ -48,24 +48,24 @@
 #define RISC_SYNC_EVEN_VBI	 0x00000207
 #define RISC_NOOP			 0xF0000000
 
-//*****************************************************************************
-// ASB SRAM
-//*****************************************************************************
-#define  TX_SRAM                   0x000000	// Transmit SRAM
-
-//*****************************************************************************
-#define  RX_RAM                    0x010000	// Receive SRAM
-
-//*****************************************************************************
-// Application Layer (AL)
-//*****************************************************************************
-#define  DEV_CNTRL2                0x040000	// Device control
+/*****************************************************************************
+* ASB SRAM
+ *****************************************************************************/
+#define  TX_SRAM                   0x000000	/* Transmit SRAM */
+
+/*****************************************************************************/
+#define  RX_RAM                    0x010000	/* Receive SRAM */
+
+/*****************************************************************************
+* Application Layer (AL)
+ *****************************************************************************/
+#define  DEV_CNTRL2                0x040000	/* Device control */
 #define  FLD_RUN_RISC              0x00000020
 
-//*****************************************************************************
-#define  PCI_INT_MSK               0x040010	// PCI interrupt mask
-#define  PCI_INT_STAT              0x040014	// PCI interrupt status
-#define  PCI_INT_MSTAT             0x040018	// PCI interrupt masked status
+/* ***************************************************************************** */
+#define  PCI_INT_MSK               0x040010	/* PCI interrupt mask */
+#define  PCI_INT_STAT              0x040014	/* PCI interrupt status */
+#define  PCI_INT_MSTAT             0x040018	/* PCI interrupt masked status */
 #define  FLD_HAMMERHEAD_INT        (1 << 27)
 #define  FLD_UART_INT              (1 << 26)
 #define  FLD_IRQN_INT              (1 << 25)
@@ -93,65 +93,65 @@
 #define  FLD_VID_B_INT             (1 << 1)
 #define  FLD_VID_A_INT             (1 << 0)
 
-//*****************************************************************************
-#define  VID_A_INT_MSK             0x040020	// Video A interrupt mask
-#define  VID_A_INT_STAT            0x040024	// Video A interrupt status
-#define  VID_A_INT_MSTAT           0x040028	// Video A interrupt masked status
-#define  VID_A_INT_SSTAT           0x04002C	// Video A interrupt set status
-
-//*****************************************************************************
-#define  VID_B_INT_MSK             0x040030	// Video B interrupt mask
-#define  VID_B_INT_STAT            0x040034	// Video B interrupt status
-#define  VID_B_INT_MSTAT           0x040038	// Video B interrupt masked status
-#define  VID_B_INT_SSTAT           0x04003C	// Video B interrupt set status
-
-//*****************************************************************************
-#define  VID_C_INT_MSK             0x040040	// Video C interrupt mask
-#define  VID_C_INT_STAT            0x040044	// Video C interrupt status
-#define  VID_C_INT_MSTAT           0x040048	// Video C interrupt masked status
-#define  VID_C_INT_SSTAT           0x04004C	// Video C interrupt set status
-
-//*****************************************************************************
-#define  VID_D_INT_MSK             0x040050	// Video D interrupt mask
-#define  VID_D_INT_STAT            0x040054	// Video D interrupt status
-#define  VID_D_INT_MSTAT           0x040058	// Video D interrupt masked status
-#define  VID_D_INT_SSTAT           0x04005C	// Video D interrupt set status
-
-//*****************************************************************************
-#define  VID_E_INT_MSK             0x040060	// Video E interrupt mask
-#define  VID_E_INT_STAT            0x040064	// Video E interrupt status
-#define  VID_E_INT_MSTAT           0x040068	// Video E interrupt masked status
-#define  VID_E_INT_SSTAT           0x04006C	// Video E interrupt set status
-
-//*****************************************************************************
-#define  VID_F_INT_MSK             0x040070	// Video F interrupt mask
-#define  VID_F_INT_STAT            0x040074	// Video F interrupt status
-#define  VID_F_INT_MSTAT           0x040078	// Video F interrupt masked status
-#define  VID_F_INT_SSTAT           0x04007C	// Video F interrupt set status
-
-//*****************************************************************************
-#define  VID_G_INT_MSK             0x040080	// Video G interrupt mask
-#define  VID_G_INT_STAT            0x040084	// Video G interrupt status
-#define  VID_G_INT_MSTAT           0x040088	// Video G interrupt masked status
-#define  VID_G_INT_SSTAT           0x04008C	// Video G interrupt set status
-
-//*****************************************************************************
-#define  VID_H_INT_MSK             0x040090	// Video H interrupt mask
-#define  VID_H_INT_STAT            0x040094	// Video H interrupt status
-#define  VID_H_INT_MSTAT           0x040098	// Video H interrupt masked status
-#define  VID_H_INT_SSTAT           0x04009C	// Video H interrupt set status
-
-//*****************************************************************************
-#define  VID_I_INT_MSK             0x0400A0	// Video I interrupt mask
-#define  VID_I_INT_STAT            0x0400A4	// Video I interrupt status
-#define  VID_I_INT_MSTAT           0x0400A8	// Video I interrupt masked status
-#define  VID_I_INT_SSTAT           0x0400AC	// Video I interrupt set status
-
-//*****************************************************************************
-#define  VID_J_INT_MSK             0x0400B0	// Video J interrupt mask
-#define  VID_J_INT_STAT            0x0400B4	// Video J interrupt status
-#define  VID_J_INT_MSTAT           0x0400B8	// Video J interrupt masked status
-#define  VID_J_INT_SSTAT           0x0400BC	// Video J interrupt set status
+/* ***************************************************************************** */
+#define  VID_A_INT_MSK             0x040020	/* Video A interrupt mask */
+#define  VID_A_INT_STAT            0x040024	/* Video A interrupt status */
+#define  VID_A_INT_MSTAT           0x040028	/* Video A interrupt masked status */
+#define  VID_A_INT_SSTAT           0x04002C	/* Video A interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_B_INT_MSK             0x040030	/* Video B interrupt mask */
+#define  VID_B_INT_STAT            0x040034	/* Video B interrupt status */
+#define  VID_B_INT_MSTAT           0x040038	/* Video B interrupt masked status */
+#define  VID_B_INT_SSTAT           0x04003C	/* Video B interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_C_INT_MSK             0x040040	/* Video C interrupt mask */
+#define  VID_C_INT_STAT            0x040044	/* Video C interrupt status */
+#define  VID_C_INT_MSTAT           0x040048	/* Video C interrupt masked status */
+#define  VID_C_INT_SSTAT           0x04004C	/* Video C interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_D_INT_MSK             0x040050	/* Video D interrupt mask */
+#define  VID_D_INT_STAT            0x040054	/* Video D interrupt status */
+#define  VID_D_INT_MSTAT           0x040058	/* Video D interrupt masked status */
+#define  VID_D_INT_SSTAT           0x04005C	/* Video D interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_E_INT_MSK             0x040060	/* Video E interrupt mask */
+#define  VID_E_INT_STAT            0x040064	/* Video E interrupt status */
+#define  VID_E_INT_MSTAT           0x040068	/* Video E interrupt masked status */
+#define  VID_E_INT_SSTAT           0x04006C	/* Video E interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_F_INT_MSK             0x040070	/* Video F interrupt mask */
+#define  VID_F_INT_STAT            0x040074	/* Video F interrupt status */
+#define  VID_F_INT_MSTAT           0x040078	/* Video F interrupt masked status */
+#define  VID_F_INT_SSTAT           0x04007C	/* Video F interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_G_INT_MSK             0x040080	/* Video G interrupt mask */
+#define  VID_G_INT_STAT            0x040084	/* Video G interrupt status */
+#define  VID_G_INT_MSTAT           0x040088	/* Video G interrupt masked status */
+#define  VID_G_INT_SSTAT           0x04008C	/* Video G interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_H_INT_MSK             0x040090	/* Video H interrupt mask */
+#define  VID_H_INT_STAT            0x040094	/* Video H interrupt status */
+#define  VID_H_INT_MSTAT           0x040098	/* Video H interrupt masked status */
+#define  VID_H_INT_SSTAT           0x04009C	/* Video H interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_I_INT_MSK             0x0400A0	/* Video I interrupt mask */
+#define  VID_I_INT_STAT            0x0400A4	/* Video I interrupt status */
+#define  VID_I_INT_MSTAT           0x0400A8	/* Video I interrupt masked status */
+#define  VID_I_INT_SSTAT           0x0400AC	/* Video I interrupt set status */
+
+/* ***************************************************************************** */
+#define  VID_J_INT_MSK             0x0400B0	/* Video J interrupt mask */
+#define  VID_J_INT_STAT            0x0400B4	/* Video J interrupt status */
+#define  VID_J_INT_MSTAT           0x0400B8	/* Video J interrupt masked status */
+#define  VID_J_INT_SSTAT           0x0400BC	/* Video J interrupt set status */
 
 #define  FLD_VID_SRC_OPC_ERR       0x00020000
 #define  FLD_VID_DST_OPC_ERR       0x00010000
@@ -166,35 +166,35 @@
 #define  FLD_VID_SRC_ERRORS		FLD_VID_SRC_OPC_ERR | FLD_VID_SRC_SYNC | FLD_VID_SRC_UF
 #define  FLD_VID_DST_ERRORS		FLD_VID_DST_OPC_ERR | FLD_VID_DST_SYNC | FLD_VID_DST_OF
 
-//*****************************************************************************
-#define  AUD_A_INT_MSK             0x0400C0	// Audio Int interrupt mask
-#define  AUD_A_INT_STAT            0x0400C4	// Audio Int interrupt status
-#define  AUD_A_INT_MSTAT           0x0400C8	// Audio Int interrupt masked status
-#define  AUD_A_INT_SSTAT           0x0400CC	// Audio Int interrupt set status
-
-//*****************************************************************************
-#define  AUD_B_INT_MSK             0x0400D0	// Audio Int interrupt mask
-#define  AUD_B_INT_STAT            0x0400D4	// Audio Int interrupt status
-#define  AUD_B_INT_MSTAT           0x0400D8	// Audio Int interrupt masked status
-#define  AUD_B_INT_SSTAT           0x0400DC	// Audio Int interrupt set status
-
-//*****************************************************************************
-#define  AUD_C_INT_MSK             0x0400E0	// Audio Int interrupt mask
-#define  AUD_C_INT_STAT            0x0400E4	// Audio Int interrupt status
-#define  AUD_C_INT_MSTAT           0x0400E8	// Audio Int interrupt masked status
-#define  AUD_C_INT_SSTAT           0x0400EC	// Audio Int interrupt set status
-
-//*****************************************************************************
-#define  AUD_D_INT_MSK             0x0400F0	// Audio Int interrupt mask
-#define  AUD_D_INT_STAT            0x0400F4	// Audio Int interrupt status
-#define  AUD_D_INT_MSTAT           0x0400F8	// Audio Int interrupt masked status
-#define  AUD_D_INT_SSTAT           0x0400FC	// Audio Int interrupt set status
-
-//*****************************************************************************
-#define  AUD_E_INT_MSK             0x040100	// Audio Int interrupt mask
-#define  AUD_E_INT_STAT            0x040104	// Audio Int interrupt status
-#define  AUD_E_INT_MSTAT           0x040108	// Audio Int interrupt masked status
-#define  AUD_E_INT_SSTAT           0x04010C	// Audio Int interrupt set status
+/* ***************************************************************************** */
+#define  AUD_A_INT_MSK             0x0400C0	/* Audio Int interrupt mask */
+#define  AUD_A_INT_STAT            0x0400C4	/* Audio Int interrupt status */
+#define  AUD_A_INT_MSTAT           0x0400C8	/* Audio Int interrupt masked status */
+#define  AUD_A_INT_SSTAT           0x0400CC	/* Audio Int interrupt set status */
+
+/* ***************************************************************************** */
+#define  AUD_B_INT_MSK             0x0400D0	/* Audio Int interrupt mask */
+#define  AUD_B_INT_STAT            0x0400D4	/* Audio Int interrupt status */
+#define  AUD_B_INT_MSTAT           0x0400D8	/* Audio Int interrupt masked status */
+#define  AUD_B_INT_SSTAT           0x0400DC	/* Audio Int interrupt set status */
+
+/* ***************************************************************************** */
+#define  AUD_C_INT_MSK             0x0400E0	/* Audio Int interrupt mask */
+#define  AUD_C_INT_STAT            0x0400E4	/* Audio Int interrupt status */
+#define  AUD_C_INT_MSTAT           0x0400E8	/* Audio Int interrupt masked status */
+#define  AUD_C_INT_SSTAT           0x0400EC	/* Audio Int interrupt set status */
+
+/* ***************************************************************************** */
+#define  AUD_D_INT_MSK             0x0400F0	/* Audio Int interrupt mask */
+#define  AUD_D_INT_STAT            0x0400F4	/* Audio Int interrupt status */
+#define  AUD_D_INT_MSTAT           0x0400F8	/* Audio Int interrupt masked status */
+#define  AUD_D_INT_SSTAT           0x0400FC	/* Audio Int interrupt set status */
+
+/* ***************************************************************************** */
+#define  AUD_E_INT_MSK             0x040100	/* Audio Int interrupt mask */
+#define  AUD_E_INT_STAT            0x040104	/* Audio Int interrupt status */
+#define  AUD_E_INT_MSTAT           0x040108	/* Audio Int interrupt masked status */
+#define  AUD_E_INT_SSTAT           0x04010C	/* Audio Int interrupt set status */
 
 #define  FLD_AUD_SRC_OPC_ERR       0x00020000
 #define  FLD_AUD_DST_OPC_ERR       0x00010000
@@ -207,17 +207,17 @@
 #define  FLD_AUD_SRC_RISCI1        0x00000002
 #define  FLD_AUD_DST_RISCI1        0x00000001
 
-//*****************************************************************************
-#define  MBIF_A_INT_MSK             0x040110	// MBIF Int interrupt mask
-#define  MBIF_A_INT_STAT            0x040114	// MBIF Int interrupt status
-#define  MBIF_A_INT_MSTAT           0x040118	// MBIF Int interrupt masked status
-#define  MBIF_A_INT_SSTAT           0x04011C	// MBIF Int interrupt set status
+/* ***************************************************************************** */
+#define  MBIF_A_INT_MSK             0x040110	/* MBIF Int interrupt mask */
+#define  MBIF_A_INT_STAT            0x040114	/* MBIF Int interrupt status */
+#define  MBIF_A_INT_MSTAT           0x040118	/* MBIF Int interrupt masked status */
+#define  MBIF_A_INT_SSTAT           0x04011C	/* MBIF Int interrupt set status */
 
-//*****************************************************************************
-#define  MBIF_B_INT_MSK             0x040120	// MBIF Int interrupt mask
-#define  MBIF_B_INT_STAT            0x040124	// MBIF Int interrupt status
-#define  MBIF_B_INT_MSTAT           0x040128	// MBIF Int interrupt masked status
-#define  MBIF_B_INT_SSTAT           0x04012C	// MBIF Int interrupt set status
+/* ***************************************************************************** */
+#define  MBIF_B_INT_MSK             0x040120	/* MBIF Int interrupt mask */
+#define  MBIF_B_INT_STAT            0x040124	/* MBIF Int interrupt status */
+#define  MBIF_B_INT_MSTAT           0x040128	/* MBIF Int interrupt masked status */
+#define  MBIF_B_INT_SSTAT           0x04012C	/* MBIF Int interrupt set status */
 
 #define  FLD_MBIF_DST_OPC_ERR       0x00010000
 #define  FLD_MBIF_DST_SYNC          0x00001000
@@ -225,35 +225,35 @@
 #define  FLD_MBIF_DST_RISCI2        0x00000010
 #define  FLD_MBIF_DST_RISCI1        0x00000001
 
-//*****************************************************************************
-#define  AUD_EXT_INT_MSK           0x040060	// Audio Ext interrupt mask
-#define  AUD_EXT_INT_STAT          0x040064	// Audio Ext interrupt status
-#define  AUD_EXT_INT_MSTAT         0x040068	// Audio Ext interrupt masked status
-#define  AUD_EXT_INT_SSTAT         0x04006C	// Audio Ext interrupt set status
+/* ***************************************************************************** */
+#define  AUD_EXT_INT_MSK           0x040060	/* Audio Ext interrupt mask */
+#define  AUD_EXT_INT_STAT          0x040064	/* Audio Ext interrupt status */
+#define  AUD_EXT_INT_MSTAT         0x040068	/* Audio Ext interrupt masked status */
+#define  AUD_EXT_INT_SSTAT         0x04006C	/* Audio Ext interrupt set status */
 #define  FLD_AUD_EXT_OPC_ERR       0x00010000
 #define  FLD_AUD_EXT_SYNC          0x00001000
 #define  FLD_AUD_EXT_OF            0x00000100
 #define  FLD_AUD_EXT_RISCI2        0x00000010
 #define  FLD_AUD_EXT_RISCI1        0x00000001
 
-//*****************************************************************************
-#define  GPIO_LO                   0x110010	// Lower  of GPIO pins [31:0]
-#define  GPIO_HI                   0x110014	// Upper WORD  of GPIO pins [47:31]
+/* ***************************************************************************** */
+#define  GPIO_LO                   0x110010	/* Lower  of GPIO pins [31:0] */
+#define  GPIO_HI                   0x110014	/* Upper WORD  of GPIO pins [47:31] */
 
-#define  GPIO_LO_OE                0x110018	// Lower  of GPIO output enable [31:0]
-#define  GPIO_HI_OE                0x11001C	// Upper word  of GPIO output enable [47:32]
+#define  GPIO_LO_OE                0x110018	/* Lower  of GPIO output enable [31:0] */
+#define  GPIO_HI_OE                0x11001C	/* Upper word  of GPIO output enable [47:32] */
 
-#define  GPIO_LO_INT_MSK           0x11003C	// GPIO interrupt mask
-#define  GPIO_LO_INT_STAT          0x110044	// GPIO interrupt status
-#define  GPIO_LO_INT_MSTAT         0x11004C	// GPIO interrupt masked status
-#define  GPIO_LO_ISM_SNS           0x110054	// GPIO interrupt sensitivity
-#define  GPIO_LO_ISM_POL           0x11005C	// GPIO interrupt polarity
+#define  GPIO_LO_INT_MSK           0x11003C	/* GPIO interrupt mask */
+#define  GPIO_LO_INT_STAT          0x110044	/* GPIO interrupt status */
+#define  GPIO_LO_INT_MSTAT         0x11004C	/* GPIO interrupt masked status */
+#define  GPIO_LO_ISM_SNS           0x110054	/* GPIO interrupt sensitivity */
+#define  GPIO_LO_ISM_POL           0x11005C	/* GPIO interrupt polarity */
 
-#define  GPIO_HI_INT_MSK           0x110040	// GPIO interrupt mask
-#define  GPIO_HI_INT_STAT          0x110048	// GPIO interrupt status
-#define  GPIO_HI_INT_MSTAT         0x110050	// GPIO interrupt masked status
-#define  GPIO_HI_ISM_SNS           0x110058	// GPIO interrupt sensitivity
-#define  GPIO_HI_ISM_POL           0x110060	// GPIO interrupt polarity
+#define  GPIO_HI_INT_MSK           0x110040	/* GPIO interrupt mask */
+#define  GPIO_HI_INT_STAT          0x110048	/* GPIO interrupt status */
+#define  GPIO_HI_INT_MSTAT         0x110050	/* GPIO interrupt masked status */
+#define  GPIO_HI_ISM_SNS           0x110058	/* GPIO interrupt sensitivity */
+#define  GPIO_HI_ISM_POL           0x110060	/* GPIO interrupt polarity */
 
 #define  FLD_GPIO43_INT            (1 << 11)
 #define  FLD_GPIO42_INT            (1 << 10)
@@ -271,236 +271,236 @@
 #define  FLD_GPIO1_INT             (1 << 1)
 #define  FLD_GPIO0_INT             (1 << 0)
 
-//*****************************************************************************
-#define  TC_REQ                    0x040090	// Rider PCI Express traFFic class request
+/* ***************************************************************************** */
+#define  TC_REQ                    0x040090	/* Rider PCI Express traFFic class request */
 
-//*****************************************************************************
-#define  TC_REQ_SET                0x040094	// Rider PCI Express traFFic class request set
+/* ***************************************************************************** */
+#define  TC_REQ_SET                0x040094	/* Rider PCI Express traFFic class request set */
 
-//*****************************************************************************
-// Rider
-//*****************************************************************************
+/* ***************************************************************************** */
+/* Rider */
+/* ***************************************************************************** */
 
-// PCI Compatible Header
-//*****************************************************************************
+/* PCI Compatible Header */
+/* ***************************************************************************** */
 #define  RDR_CFG0                  0x050000
 #define  RDR_VENDOR_DEVICE_ID_CFG  0x050000
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG1                  0x050004
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG2                  0x050008
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG3                  0x05000C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG4                  0x050010
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG5                  0x050014
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG6                  0x050018
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG7                  0x05001C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG8                  0x050020
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFG9                  0x050024
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGA                  0x050028
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGB                  0x05002C
 #define  RDR_SUSSYSTEM_ID_CFG      0x05002C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGC                  0x050030
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGD                  0x050034
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGE                  0x050038
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_CFGF                  0x05003C
 
-//*****************************************************************************
-// PCI-Express Capabilities
-//*****************************************************************************
+/* ***************************************************************************** */
+/* PCI-Express Capabilities */
+/* ***************************************************************************** */
 #define  RDR_PECAP                 0x050040
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PEDEVCAP              0x050044
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PEDEVSC               0x050048
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PELINKCAP             0x05004C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PELINKSC              0x050050
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PMICAP                0x050080
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_PMCSR                 0x050084
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VPDCAP                0x050090
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VPDDATA               0x050094
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MSICAP                0x0500A0
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MSIARL                0x0500A4
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MSIARU                0x0500A8
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MSIDATA               0x0500AC
 
-//*****************************************************************************
-// PCI Express Extended Capabilities
-//*****************************************************************************
+/* ***************************************************************************** */
+/* PCI Express Extended Capabilities */
+/* ***************************************************************************** */
 #define  RDR_AERXCAP               0x050100
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERUESTA              0x050104
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERUEMSK              0x050108
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERUESEV              0x05010C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERCESTA              0x050110
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERCEMSK              0x050114
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERCC                 0x050118
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERHL0                0x05011C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERHL1                0x050120
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERHL2                0x050124
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_AERHL3                0x050128
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCXCAP                0x050200
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCCAP1                0x050204
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCCAP2                0x050208
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCSC                  0x05020C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR0_CAP              0x050210
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR0_CTRL             0x050214
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR0_STAT             0x050218
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR1_CAP              0x05021C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR1_CTRL             0x050220
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR1_STAT             0x050224
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR2_CAP              0x050228
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR2_CTRL             0x05022C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR2_STAT             0x050230
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR3_CAP              0x050234
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR3_CTRL             0x050238
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR3_STAT             0x05023C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB0                0x050240
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB1                0x050244
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB2                0x050248
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB3                0x05024C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB4                0x050250
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB5                0x050254
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB6                0x050258
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCARB7                0x05025C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RDRSTAT0              0x050300
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RDRSTAT1              0x050304
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RDRCTL0               0x050308
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RDRCTL1               0x05030C
 
-//*****************************************************************************
-// Transaction Layer Registers
-//*****************************************************************************
+/* ***************************************************************************** */
+/* Transaction Layer Registers */
+/* ***************************************************************************** */
 #define  RDR_TLSTAT0               0x050310
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_TLSTAT1               0x050314
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_TLCTL0                0x050318
 #define  FLD_CFG_UR_CPL_MODE       0x00000040
 #define  FLD_CFG_CORR_ERR_QUITE    0x00000020
@@ -510,569 +510,569 @@
 #define  FLD_CFG_RELAX_ORDER_MSK   0x00000002
 #define  FLD_CFG_TAG_ORDER_EN      0x00000001
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_TLCTL1                0x05031C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REQRCAL               0x050320
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REQRCAU               0x050324
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REQEPA                0x050328
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REQCTRL               0x05032C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REQSTAT               0x050330
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_TL_TEST               0x050334
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR01_CTL             0x050348
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_VCR23_CTL             0x05034C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RX_VCR0_FC            0x050350
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RX_VCR1_FC            0x050354
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RX_VCR2_FC            0x050358
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_RX_VCR3_FC            0x05035C
 
-//*****************************************************************************
-// Data Link Layer Registers
-//*****************************************************************************
+/* ***************************************************************************** */
+/* Data Link Layer Registers */
+/* ***************************************************************************** */
 #define  RDR_DLLSTAT               0x050360
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_DLLCTRL               0x050364
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_REPLAYTO              0x050368
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_ACKLATTO              0x05036C
 
-//*****************************************************************************
-// MAC Layer Registers
-//*****************************************************************************
+/* ***************************************************************************** */
+/* MAC Layer Registers */
+/* ***************************************************************************** */
 #define  RDR_MACSTAT0              0x050380
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MACSTAT1              0x050384
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MACCTRL0              0x050388
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MACCTRL1              0x05038C
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MACCTRL2              0x050390
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_MAC_LB_DATA           0x050394
 
-//*****************************************************************************
+/* ***************************************************************************** */
 #define  RDR_L0S_EXIT_LAT          0x050398
 
-//*****************************************************************************
-// DMAC
-//*****************************************************************************
-#define  DMA1_PTR1                 0x100000	// DMA Current Ptr : Ch#1
+/* ***************************************************************************** */
+/* DMAC */
+/* ***************************************************************************** */
+#define  DMA1_PTR1                 0x100000	/* DMA Current Ptr : Ch#1 */
 
-//*****************************************************************************
-#define  DMA2_PTR1                 0x100004	// DMA Current Ptr : Ch#2
+/* ***************************************************************************** */
+#define  DMA2_PTR1                 0x100004	/* DMA Current Ptr : Ch#2 */
 
-//*****************************************************************************
-#define  DMA3_PTR1                 0x100008	// DMA Current Ptr : Ch#3
+/* ***************************************************************************** */
+#define  DMA3_PTR1                 0x100008	/* DMA Current Ptr : Ch#3 */
 
-//*****************************************************************************
-#define  DMA4_PTR1                 0x10000C	// DMA Current Ptr : Ch#4
+/* ***************************************************************************** */
+#define  DMA4_PTR1                 0x10000C	/* DMA Current Ptr : Ch#4 */
 
-//*****************************************************************************
-#define  DMA5_PTR1                 0x100010	// DMA Current Ptr : Ch#5
+/* ***************************************************************************** */
+#define  DMA5_PTR1                 0x100010	/* DMA Current Ptr : Ch#5 */
 
-//*****************************************************************************
-#define  DMA6_PTR1                 0x100014	// DMA Current Ptr : Ch#6
+/* ***************************************************************************** */
+#define  DMA6_PTR1                 0x100014	/* DMA Current Ptr : Ch#6 */
 
-//*****************************************************************************
-#define  DMA7_PTR1                 0x100018	// DMA Current Ptr : Ch#7
+/* ***************************************************************************** */
+#define  DMA7_PTR1                 0x100018	/* DMA Current Ptr : Ch#7 */
 
-//*****************************************************************************
-#define  DMA8_PTR1                 0x10001C	// DMA Current Ptr : Ch#8
+/* ***************************************************************************** */
+#define  DMA8_PTR1                 0x10001C	/* DMA Current Ptr : Ch#8 */
 
-//*****************************************************************************
-#define  DMA9_PTR1                 0x100020	// DMA Current Ptr : Ch#9
+/* ***************************************************************************** */
+#define  DMA9_PTR1                 0x100020	/* DMA Current Ptr : Ch#9 */
 
-//*****************************************************************************
-#define  DMA10_PTR1                0x100024	// DMA Current Ptr : Ch#10
+/* ***************************************************************************** */
+#define  DMA10_PTR1                0x100024	/* DMA Current Ptr : Ch#10 */
 
-//*****************************************************************************
-#define  DMA11_PTR1                0x100028	// DMA Current Ptr : Ch#11
+/* ***************************************************************************** */
+#define  DMA11_PTR1                0x100028	/* DMA Current Ptr : Ch#11 */
 
-//*****************************************************************************
-#define  DMA12_PTR1                0x10002C	// DMA Current Ptr : Ch#12
+/* ***************************************************************************** */
+#define  DMA12_PTR1                0x10002C	/* DMA Current Ptr : Ch#12 */
 
-//*****************************************************************************
-#define  DMA13_PTR1                0x100030	// DMA Current Ptr : Ch#13
+/* ***************************************************************************** */
+#define  DMA13_PTR1                0x100030	/* DMA Current Ptr : Ch#13 */
 
-//*****************************************************************************
-#define  DMA14_PTR1                0x100034	// DMA Current Ptr : Ch#14
+/* ***************************************************************************** */
+#define  DMA14_PTR1                0x100034	/* DMA Current Ptr : Ch#14 */
 
-//*****************************************************************************
-#define  DMA15_PTR1                0x100038	// DMA Current Ptr : Ch#15
+/* ***************************************************************************** */
+#define  DMA15_PTR1                0x100038	/* DMA Current Ptr : Ch#15 */
 
-//*****************************************************************************
-#define  DMA16_PTR1                0x10003C	// DMA Current Ptr : Ch#16
+/* ***************************************************************************** */
+#define  DMA16_PTR1                0x10003C	/* DMA Current Ptr : Ch#16 */
 
-//*****************************************************************************
-#define  DMA17_PTR1                0x100040	// DMA Current Ptr : Ch#17
+/* ***************************************************************************** */
+#define  DMA17_PTR1                0x100040	/* DMA Current Ptr : Ch#17 */
 
-//*****************************************************************************
-#define  DMA18_PTR1                0x100044	// DMA Current Ptr : Ch#18
+/* ***************************************************************************** */
+#define  DMA18_PTR1                0x100044	/* DMA Current Ptr : Ch#18 */
 
-//*****************************************************************************
-#define  DMA19_PTR1                0x100048	// DMA Current Ptr : Ch#19
+/* ***************************************************************************** */
+#define  DMA19_PTR1                0x100048	/* DMA Current Ptr : Ch#19 */
 
-//*****************************************************************************
-#define  DMA20_PTR1                0x10004C	// DMA Current Ptr : Ch#20
+/* ***************************************************************************** */
+#define  DMA20_PTR1                0x10004C	/* DMA Current Ptr : Ch#20 */
 
-//*****************************************************************************
-#define  DMA21_PTR1                0x100050	// DMA Current Ptr : Ch#21
+/* ***************************************************************************** */
+#define  DMA21_PTR1                0x100050	/* DMA Current Ptr : Ch#21 */
 
-//*****************************************************************************
-#define  DMA22_PTR1                0x100054	// DMA Current Ptr : Ch#22
+/* ***************************************************************************** */
+#define  DMA22_PTR1                0x100054	/* DMA Current Ptr : Ch#22 */
 
-//*****************************************************************************
-#define  DMA23_PTR1                0x100058	// DMA Current Ptr : Ch#23
+/* ***************************************************************************** */
+#define  DMA23_PTR1                0x100058	/* DMA Current Ptr : Ch#23 */
 
-//*****************************************************************************
-#define  DMA24_PTR1                0x10005C	// DMA Current Ptr : Ch#24
+/* ***************************************************************************** */
+#define  DMA24_PTR1                0x10005C	/* DMA Current Ptr : Ch#24 */
 
-//*****************************************************************************
-#define  DMA25_PTR1                0x100060	// DMA Current Ptr : Ch#25
+/* ***************************************************************************** */
+#define  DMA25_PTR1                0x100060	/* DMA Current Ptr : Ch#25 */
 
-//*****************************************************************************
-#define  DMA26_PTR1                0x100064	// DMA Current Ptr : Ch#26
+/* ***************************************************************************** */
+#define  DMA26_PTR1                0x100064	/* DMA Current Ptr : Ch#26 */
 
-//*****************************************************************************
-#define  DMA1_PTR2                 0x100080	// DMA Tab Ptr : Ch#1
+/* ***************************************************************************** */
+#define  DMA1_PTR2                 0x100080	/* DMA Tab Ptr : Ch#1 */
 
-//*****************************************************************************
-#define  DMA2_PTR2                 0x100084	// DMA Tab Ptr : Ch#2
+/* ***************************************************************************** */
+#define  DMA2_PTR2                 0x100084	/* DMA Tab Ptr : Ch#2 */
 
-//*****************************************************************************
-#define  DMA3_PTR2                 0x100088	// DMA Tab Ptr : Ch#3
+/* ***************************************************************************** */
+#define  DMA3_PTR2                 0x100088	/* DMA Tab Ptr : Ch#3 */
 
-//*****************************************************************************
-#define  DMA4_PTR2                 0x10008C	// DMA Tab Ptr : Ch#4
+/* ***************************************************************************** */
+#define  DMA4_PTR2                 0x10008C	/* DMA Tab Ptr : Ch#4 */
 
-//*****************************************************************************
-#define  DMA5_PTR2                 0x100090	// DMA Tab Ptr : Ch#5
+/* ***************************************************************************** */
+#define  DMA5_PTR2                 0x100090	/* DMA Tab Ptr : Ch#5 */
 
-//*****************************************************************************
-#define  DMA6_PTR2                 0x100094	// DMA Tab Ptr : Ch#6
+/* ***************************************************************************** */
+#define  DMA6_PTR2                 0x100094	/* DMA Tab Ptr : Ch#6 */
 
-//*****************************************************************************
-#define  DMA7_PTR2                 0x100098	// DMA Tab Ptr : Ch#7
+/* ***************************************************************************** */
+#define  DMA7_PTR2                 0x100098	/* DMA Tab Ptr : Ch#7 */
 
-//*****************************************************************************
-#define  DMA8_PTR2                 0x10009C	// DMA Tab Ptr : Ch#8
+/* ***************************************************************************** */
+#define  DMA8_PTR2                 0x10009C	/* DMA Tab Ptr : Ch#8 */
 
-//*****************************************************************************
-#define  DMA9_PTR2                 0x1000A0	// DMA Tab Ptr : Ch#9
+/* ***************************************************************************** */
+#define  DMA9_PTR2                 0x1000A0	/* DMA Tab Ptr : Ch#9 */
 
-//*****************************************************************************
-#define  DMA10_PTR2                0x1000A4	// DMA Tab Ptr : Ch#10
+/* ***************************************************************************** */
+#define  DMA10_PTR2                0x1000A4	/* DMA Tab Ptr : Ch#10 */
 
-//*****************************************************************************
-#define  DMA11_PTR2                0x1000A8	// DMA Tab Ptr : Ch#11
+/* ***************************************************************************** */
+#define  DMA11_PTR2                0x1000A8	/* DMA Tab Ptr : Ch#11 */
 
-//*****************************************************************************
-#define  DMA12_PTR2                0x1000AC	// DMA Tab Ptr : Ch#12
+/* ***************************************************************************** */
+#define  DMA12_PTR2                0x1000AC	/* DMA Tab Ptr : Ch#12 */
 
-//*****************************************************************************
-#define  DMA13_PTR2                0x1000B0	// DMA Tab Ptr : Ch#13
+/* ***************************************************************************** */
+#define  DMA13_PTR2                0x1000B0	/* DMA Tab Ptr : Ch#13 */
 
-//*****************************************************************************
-#define  DMA14_PTR2                0x1000B4	// DMA Tab Ptr : Ch#14
+/* ***************************************************************************** */
+#define  DMA14_PTR2                0x1000B4	/* DMA Tab Ptr : Ch#14 */
 
-//*****************************************************************************
-#define  DMA15_PTR2                0x1000B8	// DMA Tab Ptr : Ch#15
+/* ***************************************************************************** */
+#define  DMA15_PTR2                0x1000B8	/* DMA Tab Ptr : Ch#15 */
 
-//*****************************************************************************
-#define  DMA16_PTR2                0x1000BC	// DMA Tab Ptr : Ch#16
+/* ***************************************************************************** */
+#define  DMA16_PTR2                0x1000BC	/* DMA Tab Ptr : Ch#16 */
 
-//*****************************************************************************
-#define  DMA17_PTR2                0x1000C0	// DMA Tab Ptr : Ch#17
+/* ***************************************************************************** */
+#define  DMA17_PTR2                0x1000C0	/* DMA Tab Ptr : Ch#17 */
 
-//*****************************************************************************
-#define  DMA18_PTR2                0x1000C4	// DMA Tab Ptr : Ch#18
+/* ***************************************************************************** */
+#define  DMA18_PTR2                0x1000C4	/* DMA Tab Ptr : Ch#18 */
 
-//*****************************************************************************
-#define  DMA19_PTR2                0x1000C8	// DMA Tab Ptr : Ch#19
+/* ***************************************************************************** */
+#define  DMA19_PTR2                0x1000C8	/* DMA Tab Ptr : Ch#19 */
 
-//*****************************************************************************
-#define  DMA20_PTR2                0x1000CC	// DMA Tab Ptr : Ch#20
+/* ***************************************************************************** */
+#define  DMA20_PTR2                0x1000CC	/* DMA Tab Ptr : Ch#20 */
 
-//*****************************************************************************
-#define  DMA21_PTR2                0x1000D0	// DMA Tab Ptr : Ch#21
+/* ***************************************************************************** */
+#define  DMA21_PTR2                0x1000D0	/* DMA Tab Ptr : Ch#21 */
 
-//*****************************************************************************
-#define  DMA22_PTR2                0x1000D4	// DMA Tab Ptr : Ch#22
+/* ***************************************************************************** */
+#define  DMA22_PTR2                0x1000D4	/* DMA Tab Ptr : Ch#22 */
 
-//*****************************************************************************
-#define  DMA23_PTR2                0x1000D8	// DMA Tab Ptr : Ch#23
+/* ***************************************************************************** */
+#define  DMA23_PTR2                0x1000D8	/* DMA Tab Ptr : Ch#23 */
 
-//*****************************************************************************
-#define  DMA24_PTR2                0x1000DC	// DMA Tab Ptr : Ch#24
+/* ***************************************************************************** */
+#define  DMA24_PTR2                0x1000DC	/* DMA Tab Ptr : Ch#24 */
 
-//*****************************************************************************
-#define  DMA25_PTR2                0x1000E0	// DMA Tab Ptr : Ch#25
+/* ***************************************************************************** */
+#define  DMA25_PTR2                0x1000E0	/* DMA Tab Ptr : Ch#25 */
 
-//*****************************************************************************
-#define  DMA26_PTR2                0x1000E4	// DMA Tab Ptr : Ch#26
+/* ***************************************************************************** */
+#define  DMA26_PTR2                0x1000E4	/* DMA Tab Ptr : Ch#26 */
 
-//*****************************************************************************
-#define  DMA1_CNT1                 0x100100	// DMA BuFFer Size : Ch#1
+/* ***************************************************************************** */
+#define  DMA1_CNT1                 0x100100	/* DMA BuFFer Size : Ch#1 */
 
-//*****************************************************************************
-#define  DMA2_CNT1                 0x100104	// DMA BuFFer Size : Ch#2
+/* ***************************************************************************** */
+#define  DMA2_CNT1                 0x100104	/* DMA BuFFer Size : Ch#2 */
 
-//*****************************************************************************
-#define  DMA3_CNT1                 0x100108	// DMA BuFFer Size : Ch#3
+/* ***************************************************************************** */
+#define  DMA3_CNT1                 0x100108	/* DMA BuFFer Size : Ch#3 */
 
-//*****************************************************************************
-#define  DMA4_CNT1                 0x10010C	// DMA BuFFer Size : Ch#4
+/* ***************************************************************************** */
+#define  DMA4_CNT1                 0x10010C	/* DMA BuFFer Size : Ch#4 */
 
-//*****************************************************************************
-#define  DMA5_CNT1                 0x100110	// DMA BuFFer Size : Ch#5
+/* ***************************************************************************** */
+#define  DMA5_CNT1                 0x100110	/* DMA BuFFer Size : Ch#5 */
 
-//*****************************************************************************
-#define  DMA6_CNT1                 0x100114	// DMA BuFFer Size : Ch#6
+/* ***************************************************************************** */
+#define  DMA6_CNT1                 0x100114	/* DMA BuFFer Size : Ch#6 */
 
-//*****************************************************************************
-#define  DMA7_CNT1                 0x100118	// DMA BuFFer Size : Ch#7
+/* ***************************************************************************** */
+#define  DMA7_CNT1                 0x100118	/* DMA BuFFer Size : Ch#7 */
 
-//*****************************************************************************
-#define  DMA8_CNT1                 0x10011C	// DMA BuFFer Size : Ch#8
+/* ***************************************************************************** */
+#define  DMA8_CNT1                 0x10011C	/* DMA BuFFer Size : Ch#8 */
 
-//*****************************************************************************
-#define  DMA9_CNT1                 0x100120	// DMA BuFFer Size : Ch#9
+/* ***************************************************************************** */
+#define  DMA9_CNT1                 0x100120	/* DMA BuFFer Size : Ch#9 */
 
-//*****************************************************************************
-#define  DMA10_CNT1                0x100124	// DMA BuFFer Size : Ch#10
+/* ***************************************************************************** */
+#define  DMA10_CNT1                0x100124	/* DMA BuFFer Size : Ch#10 */
 
-//*****************************************************************************
-#define  DMA11_CNT1                0x100128	// DMA BuFFer Size : Ch#11
+/* ***************************************************************************** */
+#define  DMA11_CNT1                0x100128	/* DMA BuFFer Size : Ch#11 */
 
-//*****************************************************************************
-#define  DMA12_CNT1                0x10012C	// DMA BuFFer Size : Ch#12
+/* ***************************************************************************** */
+#define  DMA12_CNT1                0x10012C	/* DMA BuFFer Size : Ch#12 */
 
-//*****************************************************************************
-#define  DMA13_CNT1                0x100130	// DMA BuFFer Size : Ch#13
+/* ***************************************************************************** */
+#define  DMA13_CNT1                0x100130	/* DMA BuFFer Size : Ch#13 */
 
-//*****************************************************************************
-#define  DMA14_CNT1                0x100134	// DMA BuFFer Size : Ch#14
+/* ***************************************************************************** */
+#define  DMA14_CNT1                0x100134	/* DMA BuFFer Size : Ch#14 */
 
-//*****************************************************************************
-#define  DMA15_CNT1                0x100138	// DMA BuFFer Size : Ch#15
+/* ***************************************************************************** */
+#define  DMA15_CNT1                0x100138	/* DMA BuFFer Size : Ch#15 */
 
-//*****************************************************************************
-#define  DMA16_CNT1                0x10013C	// DMA BuFFer Size : Ch#16
+/* ***************************************************************************** */
+#define  DMA16_CNT1                0x10013C	/* DMA BuFFer Size : Ch#16 */
 
-//*****************************************************************************
-#define  DMA17_CNT1                0x100140	// DMA BuFFer Size : Ch#17
+/* ***************************************************************************** */
+#define  DMA17_CNT1                0x100140	/* DMA BuFFer Size : Ch#17 */
 
-//*****************************************************************************
-#define  DMA18_CNT1                0x100144	// DMA BuFFer Size : Ch#18
+/* ***************************************************************************** */
+#define  DMA18_CNT1                0x100144	/* DMA BuFFer Size : Ch#18 */
 
-//*****************************************************************************
-#define  DMA19_CNT1                0x100148	// DMA BuFFer Size : Ch#19
+/* ***************************************************************************** */
+#define  DMA19_CNT1                0x100148	/* DMA BuFFer Size : Ch#19 */
 
-//*****************************************************************************
-#define  DMA20_CNT1                0x10014C	// DMA BuFFer Size : Ch#20
+/* ***************************************************************************** */
+#define  DMA20_CNT1                0x10014C	/* DMA BuFFer Size : Ch#20 */
 
-//*****************************************************************************
-#define  DMA21_CNT1                0x100150	// DMA BuFFer Size : Ch#21
+/* ***************************************************************************** */
+#define  DMA21_CNT1                0x100150	/* DMA BuFFer Size : Ch#21 */
 
-//*****************************************************************************
-#define  DMA22_CNT1                0x100154	// DMA BuFFer Size : Ch#22
+/* ***************************************************************************** */
+#define  DMA22_CNT1                0x100154	/* DMA BuFFer Size : Ch#22 */
 
-//*****************************************************************************
-#define  DMA23_CNT1                0x100158	// DMA BuFFer Size : Ch#23
+/* ***************************************************************************** */
+#define  DMA23_CNT1                0x100158	/* DMA BuFFer Size : Ch#23 */
 
-//*****************************************************************************
-#define  DMA24_CNT1                0x10015C	// DMA BuFFer Size : Ch#24
+/* ***************************************************************************** */
+#define  DMA24_CNT1                0x10015C	/* DMA BuFFer Size : Ch#24 */
 
-//*****************************************************************************
-#define  DMA25_CNT1                0x100160	// DMA BuFFer Size : Ch#25
+/* ***************************************************************************** */
+#define  DMA25_CNT1                0x100160	/* DMA BuFFer Size : Ch#25 */
 
-//*****************************************************************************
-#define  DMA26_CNT1                0x100164	// DMA BuFFer Size : Ch#26
+/* ***************************************************************************** */
+#define  DMA26_CNT1                0x100164	/* DMA BuFFer Size : Ch#26 */
 
-//*****************************************************************************
-#define  DMA1_CNT2                 0x100180	// DMA Table Size : Ch#1
+/* ***************************************************************************** */
+#define  DMA1_CNT2                 0x100180	/* DMA Table Size : Ch#1 */
 
-//*****************************************************************************
-#define  DMA2_CNT2                 0x100184	// DMA Table Size : Ch#2
+/* ***************************************************************************** */
+#define  DMA2_CNT2                 0x100184	/* DMA Table Size : Ch#2 */
 
-//*****************************************************************************
-#define  DMA3_CNT2                 0x100188	// DMA Table Size : Ch#3
+/* ***************************************************************************** */
+#define  DMA3_CNT2                 0x100188	/* DMA Table Size : Ch#3 */
 
-//*****************************************************************************
-#define  DMA4_CNT2                 0x10018C	// DMA Table Size : Ch#4
+/* ***************************************************************************** */
+#define  DMA4_CNT2                 0x10018C	/* DMA Table Size : Ch#4 */
 
-//*****************************************************************************
-#define  DMA5_CNT2                 0x100190	// DMA Table Size : Ch#5
+/* ***************************************************************************** */
+#define  DMA5_CNT2                 0x100190	/* DMA Table Size : Ch#5 */
 
-//*****************************************************************************
-#define  DMA6_CNT2                 0x100194	// DMA Table Size : Ch#6
+/* ***************************************************************************** */
+#define  DMA6_CNT2                 0x100194	/* DMA Table Size : Ch#6 */
 
-//*****************************************************************************
-#define  DMA7_CNT2                 0x100198	// DMA Table Size : Ch#7
+/* ***************************************************************************** */
+#define  DMA7_CNT2                 0x100198	/* DMA Table Size : Ch#7 */
 
-//*****************************************************************************
-#define  DMA8_CNT2                 0x10019C	// DMA Table Size : Ch#8
+/* ***************************************************************************** */
+#define  DMA8_CNT2                 0x10019C	/* DMA Table Size : Ch#8 */
 
-//*****************************************************************************
-#define  DMA9_CNT2                 0x1001A0	// DMA Table Size : Ch#9
+/* ***************************************************************************** */
+#define  DMA9_CNT2                 0x1001A0	/* DMA Table Size : Ch#9 */
 
-//*****************************************************************************
-#define  DMA10_CNT2                0x1001A4	// DMA Table Size : Ch#10
+/* ***************************************************************************** */
+#define  DMA10_CNT2                0x1001A4	/* DMA Table Size : Ch#10 */
 
-//*****************************************************************************
-#define  DMA11_CNT2                0x1001A8	// DMA Table Size : Ch#11
+/* ***************************************************************************** */
+#define  DMA11_CNT2                0x1001A8	/* DMA Table Size : Ch#11 */
 
-//*****************************************************************************
-#define  DMA12_CNT2                0x1001AC	// DMA Table Size : Ch#12
+/* ***************************************************************************** */
+#define  DMA12_CNT2                0x1001AC	/* DMA Table Size : Ch#12 */
 
-//*****************************************************************************
-#define  DMA13_CNT2                0x1001B0	// DMA Table Size : Ch#13
+/* ***************************************************************************** */
+#define  DMA13_CNT2                0x1001B0	/* DMA Table Size : Ch#13 */
 
-//*****************************************************************************
-#define  DMA14_CNT2                0x1001B4	// DMA Table Size : Ch#14
+/* ***************************************************************************** */
+#define  DMA14_CNT2                0x1001B4	/* DMA Table Size : Ch#14 */
 
-//*****************************************************************************
-#define  DMA15_CNT2                0x1001B8	// DMA Table Size : Ch#15
+/* ***************************************************************************** */
+#define  DMA15_CNT2                0x1001B8	/* DMA Table Size : Ch#15 */
 
-//*****************************************************************************
-#define  DMA16_CNT2                0x1001BC	// DMA Table Size : Ch#16
+/* ***************************************************************************** */
+#define  DMA16_CNT2                0x1001BC	/* DMA Table Size : Ch#16 */
 
-//*****************************************************************************
-#define  DMA17_CNT2                0x1001C0	// DMA Table Size : Ch#17
+/* ***************************************************************************** */
+#define  DMA17_CNT2                0x1001C0	/* DMA Table Size : Ch#17 */
 
-//*****************************************************************************
-#define  DMA18_CNT2                0x1001C4	// DMA Table Size : Ch#18
+/* ***************************************************************************** */
+#define  DMA18_CNT2                0x1001C4	/* DMA Table Size : Ch#18 */
 
-//*****************************************************************************
-#define  DMA19_CNT2                0x1001C8	// DMA Table Size : Ch#19
+/* ***************************************************************************** */
+#define  DMA19_CNT2                0x1001C8	/* DMA Table Size : Ch#19 */
 
-//*****************************************************************************
-#define  DMA20_CNT2                0x1001CC	// DMA Table Size : Ch#20
+/* ***************************************************************************** */
+#define  DMA20_CNT2                0x1001CC	/* DMA Table Size : Ch#20 */
 
-//*****************************************************************************
-#define  DMA21_CNT2                0x1001D0	// DMA Table Size : Ch#21
+/* ***************************************************************************** */
+#define  DMA21_CNT2                0x1001D0	/* DMA Table Size : Ch#21 */
 
-//*****************************************************************************
-#define  DMA22_CNT2                0x1001D4	// DMA Table Size : Ch#22
+/* ***************************************************************************** */
+#define  DMA22_CNT2                0x1001D4	/* DMA Table Size : Ch#22 */
 
-//*****************************************************************************
-#define  DMA23_CNT2                0x1001D8	// DMA Table Size : Ch#23
+/* ***************************************************************************** */
+#define  DMA23_CNT2                0x1001D8	/* DMA Table Size : Ch#23 */
 
-//*****************************************************************************
-#define  DMA24_CNT2                0x1001DC	// DMA Table Size : Ch#24
+/* ***************************************************************************** */
+#define  DMA24_CNT2                0x1001DC	/* DMA Table Size : Ch#24 */
 
-//*****************************************************************************
-#define  DMA25_CNT2                0x1001E0	// DMA Table Size : Ch#25
+/* ***************************************************************************** */
+#define  DMA25_CNT2                0x1001E0	/* DMA Table Size : Ch#25 */
 
-//*****************************************************************************
-#define  DMA26_CNT2                0x1001E4	// DMA Table Size : Ch#26
+/* ***************************************************************************** */
+#define  DMA26_CNT2                0x1001E4	/* DMA Table Size : Ch#26 */
 
-//*****************************************************************************
- // ITG
-//*****************************************************************************
-#define  TM_CNT_LDW                0x110000	// Timer : Counter low
+/* ***************************************************************************** */
+ /* ITG */
+/* ***************************************************************************** */
+#define  TM_CNT_LDW                0x110000	/* Timer : Counter low */
 
-//*****************************************************************************
-#define  TM_CNT_UW                 0x110004	// Timer : Counter high word
+/* ***************************************************************************** */
+#define  TM_CNT_UW                 0x110004	/* Timer : Counter high word */
 
-//*****************************************************************************
-#define  TM_LMT_LDW                0x110008	// Timer : Limit low
+/* ***************************************************************************** */
+#define  TM_LMT_LDW                0x110008	/* Timer : Limit low */
 
-//*****************************************************************************
-#define  TM_LMT_UW                 0x11000C	// Timer : Limit high word
+/* ***************************************************************************** */
+#define  TM_LMT_UW                 0x11000C	/* Timer : Limit high word */
 
-//*****************************************************************************
-#define  GP0_IO                    0x110010	// GPIO output enables data I/O
-#define  FLD_GP_OE                 0x00FF0000	// GPIO: GP_OE output enable
-#define  FLD_GP_IN                 0x0000FF00	// GPIO: GP_IN status
-#define  FLD_GP_OUT                0x000000FF	// GPIO: GP_OUT control
+/* ***************************************************************************** */
+#define  GP0_IO                    0x110010	/* GPIO output enables data I/O */
+#define  FLD_GP_OE                 0x00FF0000	/* GPIO: GP_OE output enable */
+#define  FLD_GP_IN                 0x0000FF00	/* GPIO: GP_IN status */
+#define  FLD_GP_OUT                0x000000FF	/* GPIO: GP_OUT control */
 
-//*****************************************************************************
-#define  GPIO_ISM                  0x110014	// GPIO interrupt sensitivity mode
+/* ***************************************************************************** */
+#define  GPIO_ISM                  0x110014	/* GPIO interrupt sensitivity mode */
 #define  FLD_GP_ISM_SNS            0x00000070
 #define  FLD_GP_ISM_POL            0x00000007
 
-//*****************************************************************************
-#define  SOFT_RESET                0x11001C	// Output system reset reg
+/* ***************************************************************************** */
+#define  SOFT_RESET                0x11001C	/* Output system reset reg */
 #define  FLD_PECOS_SOFT_RESET      0x00000001
 
-//*****************************************************************************
-#define  MC416_RWD                 0x110020	// MC416 GPIO[18:3] pin
-#define  MC416_OEN                 0x110024	// Output enable of GPIO[18:3]
+/* ***************************************************************************** */
+#define  MC416_RWD                 0x110020	/* MC416 GPIO[18:3] pin */
+#define  MC416_OEN                 0x110024	/* Output enable of GPIO[18:3] */
 #define  MC416_CTL                 0x110028
 
-//*****************************************************************************
-#define  ALT_PIN_OUT_SEL           0x11002C	// Alternate GPIO output select
+/* ***************************************************************************** */
+#define  ALT_PIN_OUT_SEL           0x11002C	/* Alternate GPIO output select */
 
 #define  FLD_ALT_GPIO_OUT_SEL      0xF0000000
-// 0          Disabled <-- default
-// 1          GPIO[0]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
-// 8          ATT_IF
+/* 0          Disabled <-- default */
+/* 1          GPIO[0] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
+/* 8          ATT_IF */
 
 #define  FLD_AUX_PLL_CLK_ALT_SEL   0x0F000000
-// 0          AUX_PLL_CLK<-- default
-// 1          GPIO[2]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          AUX_PLL_CLK<-- default */
+/* 1          GPIO[2] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_IR_TX_ALT_SEL         0x00F00000
-// 0          IR_TX <-- default
-// 1          GPIO[1]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          IR_TX <-- default */
+/* 1          GPIO[1] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_IR_RX_ALT_SEL         0x000F0000
-// 0          IR_RX <-- default
-// 1          GPIO[0]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          IR_RX <-- default */
+/* 1          GPIO[0] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_GPIO10_ALT_SEL        0x0000F000
-// 0          GPIO[10] <-- default
-// 1          GPIO[0]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          GPIO[10] <-- default */
+/* 1          GPIO[0] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_GPIO2_ALT_SEL         0x00000F00
-// 0          GPIO[2] <-- default
-// 1          GPIO[1]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          GPIO[2] <-- default */
+/* 1          GPIO[1] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_GPIO1_ALT_SEL         0x000000F0
-// 0          GPIO[1] <-- default
-// 1          GPIO[0]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          GPIO[1] <-- default */
+/* 1          GPIO[0] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
 #define  FLD_GPIO0_ALT_SEL         0x0000000F
-// 0          GPIO[0] <-- default
-// 1          GPIO[1]
-// 2          GPIO[10]
-// 3          VIP_656_DATA_VAL
-// 4          VIP_656_DATA[0]
-// 5          VIP_656_CLK
-// 6          VIP_656_DATA_EXT[1]
-// 7          VIP_656_DATA_EXT[0]
+/* 0          GPIO[0] <-- default */
+/* 1          GPIO[1] */
+/* 2          GPIO[10] */
+/* 3          VIP_656_DATA_VAL */
+/* 4          VIP_656_DATA[0] */
+/* 5          VIP_656_CLK */
+/* 6          VIP_656_DATA_EXT[1] */
+/* 7          VIP_656_DATA_EXT[0] */
 
-#define  ALT_PIN_IN_SEL            0x110030	// Alternate GPIO input select
+#define  ALT_PIN_IN_SEL            0x110030	/* Alternate GPIO input select */
 
 #define  FLD_GPIO10_ALT_IN_SEL     0x0000F000
-// 0          GPIO[10] <-- default
-// 1          IR_RX
-// 2          IR_TX
-// 3          AUX_PLL_CLK
-// 4          IF_ATT_SEL
-// 5          GPIO[0]
-// 6          GPIO[1]
-// 7          GPIO[2]
+/* 0          GPIO[10] <-- default */
+/* 1          IR_RX */
+/* 2          IR_TX */
+/* 3          AUX_PLL_CLK */
+/* 4          IF_ATT_SEL */
+/* 5          GPIO[0] */
+/* 6          GPIO[1] */
+/* 7          GPIO[2] */
 
 #define  FLD_GPIO2_ALT_IN_SEL      0x00000F00
-// 0          GPIO[2] <-- default
-// 1          IR_RX
-// 2          IR_TX
-// 3          AUX_PLL_CLK
-// 4          IF_ATT_SEL
+/* 0          GPIO[2] <-- default */
+/* 1          IR_RX */
+/* 2          IR_TX */
+/* 3          AUX_PLL_CLK */
+/* 4          IF_ATT_SEL */
 
 #define  FLD_GPIO1_ALT_IN_SEL      0x000000F0
-// 0          GPIO[1] <-- default
-// 1          IR_RX
-// 2          IR_TX
-// 3          AUX_PLL_CLK
-// 4          IF_ATT_SEL
+/* 0          GPIO[1] <-- default */
+/* 1          IR_RX */
+/* 2          IR_TX */
+/* 3          AUX_PLL_CLK */
+/* 4          IF_ATT_SEL */
 
 #define  FLD_GPIO0_ALT_IN_SEL      0x0000000F
-// 0          GPIO[0] <-- default
-// 1          IR_RX
-// 2          IR_TX
-// 3          AUX_PLL_CLK
-// 4          IF_ATT_SEL
+/* 0          GPIO[0] <-- default */
+/* 1          IR_RX */
+/* 2          IR_TX */
+/* 3          AUX_PLL_CLK */
+/* 4          IF_ATT_SEL */
 
-//*****************************************************************************
-#define  TEST_BUS_CTL1             0x110040	// Test bus control register #1
+/* ***************************************************************************** */
+#define  TEST_BUS_CTL1             0x110040	/* Test bus control register #1 */
 
-//*****************************************************************************
-#define  TEST_BUS_CTL2             0x110044	// Test bus control register #2
+/* ***************************************************************************** */
+#define  TEST_BUS_CTL2             0x110044	/* Test bus control register #2 */
 
-//*****************************************************************************
-#define  CLK_DELAY                 0x110048	// Clock delay
-#define  FLD_MOE_CLK_DIS           0x80000000	// Disable MoE clock
+/* ***************************************************************************** */
+#define  CLK_DELAY                 0x110048	/* Clock delay */
+#define  FLD_MOE_CLK_DIS           0x80000000	/* Disable MoE clock */
 
-//*****************************************************************************
-#define  PAD_CTRL                  0x110068	// Pad drive strength control
+/* ***************************************************************************** */
+#define  PAD_CTRL                  0x110068	/* Pad drive strength control */
 
-//*****************************************************************************
-#define  MBIST_CTRL                0x110050	// SRAM memory built-in self test control
+/* ***************************************************************************** */
+#define  MBIST_CTRL                0x110050	/* SRAM memory built-in self test control */
 
-//*****************************************************************************
-#define  MBIST_STAT                0x110054	// SRAM memory built-in self test status
+/* ***************************************************************************** */
+#define  MBIST_STAT                0x110054	/* SRAM memory built-in self test status */
 
-//*****************************************************************************
-// PLL registers
-//*****************************************************************************
+/* ***************************************************************************** */
+/* PLL registers */
+/* ***************************************************************************** */
 #define  PLL_A_INT_FRAC            0x110088
 #define  PLL_A_POST_STAT_BIST      0x11008C
 #define  PLL_B_INT_FRAC            0x110090
@@ -1090,260 +1090,260 @@
 #define  VID_CH_MODE_SEL           0x110078
 #define  VID_CH_CLK_SEL            0x11007C
 
-//*****************************************************************************
-#define  VBI_A_DMA                 0x130008	// VBI A DMA data port
+/* ***************************************************************************** */
+#define  VBI_A_DMA                 0x130008	/* VBI A DMA data port */
 
-//*****************************************************************************
-#define  VID_A_VIP_CTL             0x130080	// Video A VIP format control
+/* ***************************************************************************** */
+#define  VID_A_VIP_CTL             0x130080	/* Video A VIP format control */
 #define  FLD_VIP_MODE              0x00000001
 
-//*****************************************************************************
-#define  VID_A_PIXEL_FRMT          0x130084	// Video A pixel format
+/* ***************************************************************************** */
+#define  VID_A_PIXEL_FRMT          0x130084	/* Video A pixel format */
 #define  FLD_VID_A_GAMMA_DIS       0x00000008
 #define  FLD_VID_A_FORMAT          0x00000007
 #define  FLD_VID_A_GAMMA_FACTOR    0x00000010
 
-//*****************************************************************************
-#define  VID_A_VBI_CTL             0x130088	// Video A VBI miscellaneous control
+/* ***************************************************************************** */
+#define  VID_A_VBI_CTL             0x130088	/* Video A VBI miscellaneous control */
 #define  FLD_VID_A_VIP_EXT         0x00000003
 
-//*****************************************************************************
-#define  VID_B_DMA                 0x130100	// Video B DMA data port
+/* ***************************************************************************** */
+#define  VID_B_DMA                 0x130100	/* Video B DMA data port */
 
-//*****************************************************************************
-#define  VBI_B_DMA                 0x130108	// VBI B DMA data port
+/* ***************************************************************************** */
+#define  VBI_B_DMA                 0x130108	/* VBI B DMA data port */
 
-//*****************************************************************************
-#define  VID_B_SRC_SEL             0x130144	// Video B source select
+/* ***************************************************************************** */
+#define  VID_B_SRC_SEL             0x130144	/* Video B source select */
 #define  FLD_VID_B_SRC_SEL         0x00000000
 
-//*****************************************************************************
-#define  VID_B_LNGTH               0x130150	// Video B line length
+/* ***************************************************************************** */
+#define  VID_B_LNGTH               0x130150	/* Video B line length */
 #define  FLD_VID_B_LN_LNGTH        0x00000FFF
 
-//*****************************************************************************
-#define  VID_B_VIP_CTL             0x130180	// Video B VIP format control
+/* ***************************************************************************** */
+#define  VID_B_VIP_CTL             0x130180	/* Video B VIP format control */
 
-//*****************************************************************************
-#define  VID_B_PIXEL_FRMT          0x130184	// Video B pixel format
+/* ***************************************************************************** */
+#define  VID_B_PIXEL_FRMT          0x130184	/* Video B pixel format */
 #define  FLD_VID_B_GAMMA_DIS       0x00000008
 #define  FLD_VID_B_FORMAT          0x00000007
 #define  FLD_VID_B_GAMMA_FACTOR    0x00000010
 
-//*****************************************************************************
-#define  VID_C_DMA                 0x130200	// Video C DMA data port
+/* ***************************************************************************** */
+#define  VID_C_DMA                 0x130200	/* Video C DMA data port */
 
-//*****************************************************************************
-#define  VID_C_LNGTH               0x130250	// Video C line length
+/* ***************************************************************************** */
+#define  VID_C_LNGTH               0x130250	/* Video C line length */
 #define  FLD_VID_C_LN_LNGTH        0x00000FFF
 
-//*****************************************************************************
-// Video Destination Channels
-//*****************************************************************************
-
-#define  VID_DST_A_GPCNT           0x130020	// Video A general purpose counter
-#define  VID_DST_B_GPCNT           0x130120	// Video B general purpose counter
-#define  VID_DST_C_GPCNT           0x130220	// Video C general purpose counter
-#define  VID_DST_D_GPCNT           0x130320	// Video D general purpose counter
-#define  VID_DST_E_GPCNT           0x130420	// Video E general purpose counter
-#define  VID_DST_F_GPCNT           0x130520	// Video F general purpose counter
-#define  VID_DST_G_GPCNT           0x130620	// Video G general purpose counter
-#define  VID_DST_H_GPCNT           0x130720	// Video H general purpose counter
-
-//*****************************************************************************
-
-#define  VID_DST_A_GPCNT_CTL       0x130030	// Video A general purpose control
-#define  VID_DST_B_GPCNT_CTL       0x130130	// Video B general purpose control
-#define  VID_DST_C_GPCNT_CTL       0x130230	// Video C general purpose control
-#define  VID_DST_D_GPCNT_CTL       0x130330	// Video D general purpose control
-#define  VID_DST_E_GPCNT_CTL       0x130430	// Video E general purpose control
-#define  VID_DST_F_GPCNT_CTL       0x130530	// Video F general purpose control
-#define  VID_DST_G_GPCNT_CTL       0x130630	// Video G general purpose control
-#define  VID_DST_H_GPCNT_CTL       0x130730	// Video H general purpose control
-
-//*****************************************************************************
-
-#define  VID_DST_A_DMA_CTL         0x130040	// Video A DMA control
-#define  VID_DST_B_DMA_CTL         0x130140	// Video B DMA control
-#define  VID_DST_C_DMA_CTL         0x130240	// Video C DMA control
-#define  VID_DST_D_DMA_CTL         0x130340	// Video D DMA control
-#define  VID_DST_E_DMA_CTL         0x130440	// Video E DMA control
-#define  VID_DST_F_DMA_CTL         0x130540	// Video F DMA control
-#define  VID_DST_G_DMA_CTL         0x130640	// Video G DMA control
-#define  VID_DST_H_DMA_CTL         0x130740	// Video H DMA control
+/* ***************************************************************************** */
+/* Video Destination Channels */
+/* ***************************************************************************** */
+
+#define  VID_DST_A_GPCNT           0x130020	/* Video A general purpose counter */
+#define  VID_DST_B_GPCNT           0x130120	/* Video B general purpose counter */
+#define  VID_DST_C_GPCNT           0x130220	/* Video C general purpose counter */
+#define  VID_DST_D_GPCNT           0x130320	/* Video D general purpose counter */
+#define  VID_DST_E_GPCNT           0x130420	/* Video E general purpose counter */
+#define  VID_DST_F_GPCNT           0x130520	/* Video F general purpose counter */
+#define  VID_DST_G_GPCNT           0x130620	/* Video G general purpose counter */
+#define  VID_DST_H_GPCNT           0x130720	/* Video H general purpose counter */
+
+/* ***************************************************************************** */
+
+#define  VID_DST_A_GPCNT_CTL       0x130030	/* Video A general purpose control */
+#define  VID_DST_B_GPCNT_CTL       0x130130	/* Video B general purpose control */
+#define  VID_DST_C_GPCNT_CTL       0x130230	/* Video C general purpose control */
+#define  VID_DST_D_GPCNT_CTL       0x130330	/* Video D general purpose control */
+#define  VID_DST_E_GPCNT_CTL       0x130430	/* Video E general purpose control */
+#define  VID_DST_F_GPCNT_CTL       0x130530	/* Video F general purpose control */
+#define  VID_DST_G_GPCNT_CTL       0x130630	/* Video G general purpose control */
+#define  VID_DST_H_GPCNT_CTL       0x130730	/* Video H general purpose control */
+
+/* ***************************************************************************** */
+
+#define  VID_DST_A_DMA_CTL         0x130040	/* Video A DMA control */
+#define  VID_DST_B_DMA_CTL         0x130140	/* Video B DMA control */
+#define  VID_DST_C_DMA_CTL         0x130240	/* Video C DMA control */
+#define  VID_DST_D_DMA_CTL         0x130340	/* Video D DMA control */
+#define  VID_DST_E_DMA_CTL         0x130440	/* Video E DMA control */
+#define  VID_DST_F_DMA_CTL         0x130540	/* Video F DMA control */
+#define  VID_DST_G_DMA_CTL         0x130640	/* Video G DMA control */
+#define  VID_DST_H_DMA_CTL         0x130740	/* Video H DMA control */
 
 #define  FLD_VID_RISC_EN           0x00000010
 #define  FLD_VID_FIFO_EN           0x00000001
 
-//*****************************************************************************
-
-#define  VID_DST_A_VIP_CTL         0x130080	// Video A VIP control
-#define  VID_DST_B_VIP_CTL         0x130180	// Video B VIP control
-#define  VID_DST_C_VIP_CTL         0x130280	// Video C VIP control
-#define  VID_DST_D_VIP_CTL         0x130380	// Video D VIP control
-#define  VID_DST_E_VIP_CTL         0x130480	// Video E VIP control
-#define  VID_DST_F_VIP_CTL         0x130580	// Video F VIP control
-#define  VID_DST_G_VIP_CTL         0x130680	// Video G VIP control
-#define  VID_DST_H_VIP_CTL         0x130780	// Video H VIP control
-
-//*****************************************************************************
-
-#define  VID_DST_A_PIX_FRMT        0x130084	// Video A Pixel format
-#define  VID_DST_B_PIX_FRMT        0x130184	// Video B Pixel format
-#define  VID_DST_C_PIX_FRMT        0x130284	// Video C Pixel format
-#define  VID_DST_D_PIX_FRMT        0x130384	// Video D Pixel format
-#define  VID_DST_E_PIX_FRMT        0x130484	// Video E Pixel format
-#define  VID_DST_F_PIX_FRMT        0x130584	// Video F Pixel format
-#define  VID_DST_G_PIX_FRMT        0x130684	// Video G Pixel format
-#define  VID_DST_H_PIX_FRMT        0x130784	// Video H Pixel format
-
-//*****************************************************************************
-// Video Source Channels
-//*****************************************************************************
-
-#define  VID_SRC_A_GPCNT_CTL       0x130804	// Video A general purpose control
-#define  VID_SRC_B_GPCNT_CTL       0x130904	// Video B general purpose control
-#define  VID_SRC_C_GPCNT_CTL       0x130A04	// Video C general purpose control
-#define  VID_SRC_D_GPCNT_CTL       0x130B04	// Video D general purpose control
-#define  VID_SRC_E_GPCNT_CTL       0x130C04	// Video E general purpose control
-#define  VID_SRC_F_GPCNT_CTL       0x130D04	// Video F general purpose control
-#define  VID_SRC_I_GPCNT_CTL       0x130E04	// Video I general purpose control
-#define  VID_SRC_J_GPCNT_CTL       0x130F04	// Video J general purpose control
-
-//*****************************************************************************
-
-#define  VID_SRC_A_GPCNT           0x130808	// Video A general purpose counter
-#define  VID_SRC_B_GPCNT           0x130908	// Video B general purpose counter
-#define  VID_SRC_C_GPCNT           0x130A08	// Video C general purpose counter
-#define  VID_SRC_D_GPCNT           0x130B08	// Video D general purpose counter
-#define  VID_SRC_E_GPCNT           0x130C08	// Video E general purpose counter
-#define  VID_SRC_F_GPCNT           0x130D08	// Video F general purpose counter
-#define  VID_SRC_I_GPCNT           0x130E08	// Video I general purpose counter
-#define  VID_SRC_J_GPCNT           0x130F08	// Video J general purpose counter
-
-//*****************************************************************************
-
-#define  VID_SRC_A_DMA_CTL         0x13080C	// Video A DMA control
-#define  VID_SRC_B_DMA_CTL         0x13090C	// Video B DMA control
-#define  VID_SRC_C_DMA_CTL         0x130A0C	// Video C DMA control
-#define  VID_SRC_D_DMA_CTL         0x130B0C	// Video D DMA control
-#define  VID_SRC_E_DMA_CTL         0x130C0C	// Video E DMA control
-#define  VID_SRC_F_DMA_CTL         0x130D0C	// Video F DMA control
-#define  VID_SRC_I_DMA_CTL         0x130E0C	// Video I DMA control
-#define  VID_SRC_J_DMA_CTL         0x130F0C	// Video J DMA control
+/* ***************************************************************************** */
+
+#define  VID_DST_A_VIP_CTL         0x130080	/* Video A VIP control */
+#define  VID_DST_B_VIP_CTL         0x130180	/* Video B VIP control */
+#define  VID_DST_C_VIP_CTL         0x130280	/* Video C VIP control */
+#define  VID_DST_D_VIP_CTL         0x130380	/* Video D VIP control */
+#define  VID_DST_E_VIP_CTL         0x130480	/* Video E VIP control */
+#define  VID_DST_F_VIP_CTL         0x130580	/* Video F VIP control */
+#define  VID_DST_G_VIP_CTL         0x130680	/* Video G VIP control */
+#define  VID_DST_H_VIP_CTL         0x130780	/* Video H VIP control */
+
+/* ***************************************************************************** */
+
+#define  VID_DST_A_PIX_FRMT        0x130084	/* Video A Pixel format */
+#define  VID_DST_B_PIX_FRMT        0x130184	/* Video B Pixel format */
+#define  VID_DST_C_PIX_FRMT        0x130284	/* Video C Pixel format */
+#define  VID_DST_D_PIX_FRMT        0x130384	/* Video D Pixel format */
+#define  VID_DST_E_PIX_FRMT        0x130484	/* Video E Pixel format */
+#define  VID_DST_F_PIX_FRMT        0x130584	/* Video F Pixel format */
+#define  VID_DST_G_PIX_FRMT        0x130684	/* Video G Pixel format */
+#define  VID_DST_H_PIX_FRMT        0x130784	/* Video H Pixel format */
+
+/* ***************************************************************************** */
+/* Video Source Channels */
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_GPCNT_CTL       0x130804	/* Video A general purpose control */
+#define  VID_SRC_B_GPCNT_CTL       0x130904	/* Video B general purpose control */
+#define  VID_SRC_C_GPCNT_CTL       0x130A04	/* Video C general purpose control */
+#define  VID_SRC_D_GPCNT_CTL       0x130B04	/* Video D general purpose control */
+#define  VID_SRC_E_GPCNT_CTL       0x130C04	/* Video E general purpose control */
+#define  VID_SRC_F_GPCNT_CTL       0x130D04	/* Video F general purpose control */
+#define  VID_SRC_I_GPCNT_CTL       0x130E04	/* Video I general purpose control */
+#define  VID_SRC_J_GPCNT_CTL       0x130F04	/* Video J general purpose control */
+
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_GPCNT           0x130808	/* Video A general purpose counter */
+#define  VID_SRC_B_GPCNT           0x130908	/* Video B general purpose counter */
+#define  VID_SRC_C_GPCNT           0x130A08	/* Video C general purpose counter */
+#define  VID_SRC_D_GPCNT           0x130B08	/* Video D general purpose counter */
+#define  VID_SRC_E_GPCNT           0x130C08	/* Video E general purpose counter */
+#define  VID_SRC_F_GPCNT           0x130D08	/* Video F general purpose counter */
+#define  VID_SRC_I_GPCNT           0x130E08	/* Video I general purpose counter */
+#define  VID_SRC_J_GPCNT           0x130F08	/* Video J general purpose counter */
+
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_DMA_CTL         0x13080C	/* Video A DMA control */
+#define  VID_SRC_B_DMA_CTL         0x13090C	/* Video B DMA control */
+#define  VID_SRC_C_DMA_CTL         0x130A0C	/* Video C DMA control */
+#define  VID_SRC_D_DMA_CTL         0x130B0C	/* Video D DMA control */
+#define  VID_SRC_E_DMA_CTL         0x130C0C	/* Video E DMA control */
+#define  VID_SRC_F_DMA_CTL         0x130D0C	/* Video F DMA control */
+#define  VID_SRC_I_DMA_CTL         0x130E0C	/* Video I DMA control */
+#define  VID_SRC_J_DMA_CTL         0x130F0C	/* Video J DMA control */
 
 #define  FLD_APB_RISC_EN           0x00000010
 #define  FLD_APB_FIFO_EN           0x00000001
 
-//*****************************************************************************
-
-#define  VID_SRC_A_FMT_CTL         0x130810	// Video A format control
-#define  VID_SRC_B_FMT_CTL         0x130910	// Video B format control
-#define  VID_SRC_C_FMT_CTL         0x130A10	// Video C format control
-#define  VID_SRC_D_FMT_CTL         0x130B10	// Video D format control
-#define  VID_SRC_E_FMT_CTL         0x130C10	// Video E format control
-#define  VID_SRC_F_FMT_CTL         0x130D10	// Video F format control
-#define  VID_SRC_I_FMT_CTL         0x130E10	// Video I format control
-#define  VID_SRC_J_FMT_CTL         0x130F10	// Video J format control
-
-//*****************************************************************************
-
-#define  VID_SRC_A_ACTIVE_CTL1     0x130814	// Video A active control      1
-#define  VID_SRC_B_ACTIVE_CTL1     0x130914	// Video B active control      1
-#define  VID_SRC_C_ACTIVE_CTL1     0x130A14	// Video C active control      1
-#define  VID_SRC_D_ACTIVE_CTL1     0x130B14	// Video D active control      1
-#define  VID_SRC_E_ACTIVE_CTL1     0x130C14	// Video E active control      1
-#define  VID_SRC_F_ACTIVE_CTL1     0x130D14	// Video F active control      1
-#define  VID_SRC_I_ACTIVE_CTL1     0x130E14	// Video I active control      1
-#define  VID_SRC_J_ACTIVE_CTL1     0x130F14	// Video J active control      1
-
-//*****************************************************************************
-
-#define  VID_SRC_A_ACTIVE_CTL2     0x130818	// Video A active control      2
-#define  VID_SRC_B_ACTIVE_CTL2     0x130918	// Video B active control      2
-#define  VID_SRC_C_ACTIVE_CTL2     0x130A18	// Video C active control      2
-#define  VID_SRC_D_ACTIVE_CTL2     0x130B18	// Video D active control      2
-#define  VID_SRC_E_ACTIVE_CTL2     0x130C18	// Video E active control      2
-#define  VID_SRC_F_ACTIVE_CTL2     0x130D18	// Video F active control      2
-#define  VID_SRC_I_ACTIVE_CTL2     0x130E18	// Video I active control      2
-#define  VID_SRC_J_ACTIVE_CTL2     0x130F18	// Video J active control      2
-
-//*****************************************************************************
-
-#define  VID_SRC_A_CDT_SZ          0x13081C	// Video A CDT size
-#define  VID_SRC_B_CDT_SZ          0x13091C	// Video B CDT size
-#define  VID_SRC_C_CDT_SZ          0x130A1C	// Video C CDT size
-#define  VID_SRC_D_CDT_SZ          0x130B1C	// Video D CDT size
-#define  VID_SRC_E_CDT_SZ          0x130C1C	// Video E CDT size
-#define  VID_SRC_F_CDT_SZ          0x130D1C	// Video F CDT size
-#define  VID_SRC_I_CDT_SZ          0x130E1C	// Video I CDT size
-#define  VID_SRC_J_CDT_SZ          0x130F1C	// Video J CDT size
-
-//*****************************************************************************
-// Audio I/F
-//*****************************************************************************
-#define  AUD_DST_A_DMA             0x140000	// Audio Int A DMA data port
-#define  AUD_SRC_A_DMA             0x140008	// Audio Int A DMA data port
-
-#define  AUD_A_GPCNT               0x140010	// Audio Int A gp counter
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_FMT_CTL         0x130810	/* Video A format control */
+#define  VID_SRC_B_FMT_CTL         0x130910	/* Video B format control */
+#define  VID_SRC_C_FMT_CTL         0x130A10	/* Video C format control */
+#define  VID_SRC_D_FMT_CTL         0x130B10	/* Video D format control */
+#define  VID_SRC_E_FMT_CTL         0x130C10	/* Video E format control */
+#define  VID_SRC_F_FMT_CTL         0x130D10	/* Video F format control */
+#define  VID_SRC_I_FMT_CTL         0x130E10	/* Video I format control */
+#define  VID_SRC_J_FMT_CTL         0x130F10	/* Video J format control */
+
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_ACTIVE_CTL1     0x130814	/* Video A active control      1 */
+#define  VID_SRC_B_ACTIVE_CTL1     0x130914	/* Video B active control      1 */
+#define  VID_SRC_C_ACTIVE_CTL1     0x130A14	/* Video C active control      1 */
+#define  VID_SRC_D_ACTIVE_CTL1     0x130B14	/* Video D active control      1 */
+#define  VID_SRC_E_ACTIVE_CTL1     0x130C14	/* Video E active control      1 */
+#define  VID_SRC_F_ACTIVE_CTL1     0x130D14	/* Video F active control      1 */
+#define  VID_SRC_I_ACTIVE_CTL1     0x130E14	/* Video I active control      1 */
+#define  VID_SRC_J_ACTIVE_CTL1     0x130F14	/* Video J active control      1 */
+
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_ACTIVE_CTL2     0x130818	/* Video A active control      2 */
+#define  VID_SRC_B_ACTIVE_CTL2     0x130918	/* Video B active control      2 */
+#define  VID_SRC_C_ACTIVE_CTL2     0x130A18	/* Video C active control      2 */
+#define  VID_SRC_D_ACTIVE_CTL2     0x130B18	/* Video D active control      2 */
+#define  VID_SRC_E_ACTIVE_CTL2     0x130C18	/* Video E active control      2 */
+#define  VID_SRC_F_ACTIVE_CTL2     0x130D18	/* Video F active control      2 */
+#define  VID_SRC_I_ACTIVE_CTL2     0x130E18	/* Video I active control      2 */
+#define  VID_SRC_J_ACTIVE_CTL2     0x130F18	/* Video J active control      2 */
+
+/* ***************************************************************************** */
+
+#define  VID_SRC_A_CDT_SZ          0x13081C	/* Video A CDT size */
+#define  VID_SRC_B_CDT_SZ          0x13091C	/* Video B CDT size */
+#define  VID_SRC_C_CDT_SZ          0x130A1C	/* Video C CDT size */
+#define  VID_SRC_D_CDT_SZ          0x130B1C	/* Video D CDT size */
+#define  VID_SRC_E_CDT_SZ          0x130C1C	/* Video E CDT size */
+#define  VID_SRC_F_CDT_SZ          0x130D1C	/* Video F CDT size */
+#define  VID_SRC_I_CDT_SZ          0x130E1C	/* Video I CDT size */
+#define  VID_SRC_J_CDT_SZ          0x130F1C	/* Video J CDT size */
+
+/* ***************************************************************************** */
+/* Audio I/F */
+/* ***************************************************************************** */
+#define  AUD_DST_A_DMA             0x140000	/* Audio Int A DMA data port */
+#define  AUD_SRC_A_DMA             0x140008	/* Audio Int A DMA data port */
+
+#define  AUD_A_GPCNT               0x140010	/* Audio Int A gp counter */
 #define  FLD_AUD_A_GP_CNT          0x0000FFFF
 
-#define  AUD_A_GPCNT_CTL           0x140014	// Audio Int A gp control
+#define  AUD_A_GPCNT_CTL           0x140014	/* Audio Int A gp control */
 
-#define  AUD_A_LNGTH               0x140018	// Audio Int A line length
+#define  AUD_A_LNGTH               0x140018	/* Audio Int A line length */
 
-#define  AUD_A_CFG                 0x14001C	// Audio Int A configuration
+#define  AUD_A_CFG                 0x14001C	/* Audio Int A configuration */
 
-//*****************************************************************************
-#define  AUD_DST_B_DMA             0x140100	// Audio Int B DMA data port
-#define  AUD_SRC_B_DMA             0x140108	// Audio Int B DMA data port
+/* ***************************************************************************** */
+#define  AUD_DST_B_DMA             0x140100	/* Audio Int B DMA data port */
+#define  AUD_SRC_B_DMA             0x140108	/* Audio Int B DMA data port */
 
-#define  AUD_B_GPCNT               0x140110	// Audio Int B gp counter
+#define  AUD_B_GPCNT               0x140110	/* Audio Int B gp counter */
 #define  FLD_AUD_B_GP_CNT          0x0000FFFF
 
-#define  AUD_B_GPCNT_CTL           0x140114	// Audio Int B gp control
+#define  AUD_B_GPCNT_CTL           0x140114	/* Audio Int B gp control */
 
-#define  AUD_B_LNGTH               0x140118	// Audio Int B line length
+#define  AUD_B_LNGTH               0x140118	/* Audio Int B line length */
 
-#define  AUD_B_CFG                 0x14011C	// Audio Int B configuration
+#define  AUD_B_CFG                 0x14011C	/* Audio Int B configuration */
 
-//*****************************************************************************
-#define  AUD_DST_C_DMA             0x140200	// Audio Int C DMA data port
-#define  AUD_SRC_C_DMA             0x140208	// Audio Int C DMA data port
+/* ***************************************************************************** */
+#define  AUD_DST_C_DMA             0x140200	/* Audio Int C DMA data port */
+#define  AUD_SRC_C_DMA             0x140208	/* Audio Int C DMA data port */
 
-#define  AUD_C_GPCNT               0x140210	// Audio Int C gp counter
+#define  AUD_C_GPCNT               0x140210	/* Audio Int C gp counter */
 #define  FLD_AUD_C_GP_CNT          0x0000FFFF
 
-#define  AUD_C_GPCNT_CTL           0x140214	// Audio Int C gp control
+#define  AUD_C_GPCNT_CTL           0x140214	/* Audio Int C gp control */
 
-#define  AUD_C_LNGTH               0x140218	// Audio Int C line length
+#define  AUD_C_LNGTH               0x140218	/* Audio Int C line length */
 
-#define  AUD_C_CFG                 0x14021C	// Audio Int C configuration
+#define  AUD_C_CFG                 0x14021C	/* Audio Int C configuration */
 
-//*****************************************************************************
-#define  AUD_DST_D_DMA             0x140300	// Audio Int D DMA data port
-#define  AUD_SRC_D_DMA             0x140308	// Audio Int D DMA data port
+/* ***************************************************************************** */
+#define  AUD_DST_D_DMA             0x140300	/* Audio Int D DMA data port */
+#define  AUD_SRC_D_DMA             0x140308	/* Audio Int D DMA data port */
 
-#define  AUD_D_GPCNT               0x140310	// Audio Int D gp counter
+#define  AUD_D_GPCNT               0x140310	/* Audio Int D gp counter */
 #define  FLD_AUD_D_GP_CNT          0x0000FFFF
 
-#define  AUD_D_GPCNT_CTL           0x140314	// Audio Int D gp control
+#define  AUD_D_GPCNT_CTL           0x140314	/* Audio Int D gp control */
 
-#define  AUD_D_LNGTH               0x140318	// Audio Int D line length
+#define  AUD_D_LNGTH               0x140318	/* Audio Int D line length */
 
-#define  AUD_D_CFG                 0x14031C	// Audio Int D configuration
+#define  AUD_D_CFG                 0x14031C	/* Audio Int D configuration */
 
-//*****************************************************************************
-#define  AUD_SRC_E_DMA             0x140400	// Audio Int E DMA data port
+/* ***************************************************************************** */
+#define  AUD_SRC_E_DMA             0x140400	/* Audio Int E DMA data port */
 
-#define  AUD_E_GPCNT               0x140410	// Audio Int E gp counter
+#define  AUD_E_GPCNT               0x140410	/* Audio Int E gp counter */
 #define  FLD_AUD_E_GP_CNT          0x0000FFFF
 
-#define  AUD_E_GPCNT_CTL           0x140414	// Audio Int E gp control
+#define  AUD_E_GPCNT_CTL           0x140414	/* Audio Int E gp control */
 
-#define  AUD_E_CFG                 0x14041C	// Audio Int E configuration
+#define  AUD_E_CFG                 0x14041C	/* Audio Int E configuration */
 
-//*****************************************************************************
+/* ***************************************************************************** */
 
 #define  FLD_AUD_DST_LN_LNGTH      0x00000FFF
 
@@ -1361,8 +1361,8 @@
 
 #define  FLD_AUD_SRC_ENABLE        0x00010000
 
-//*****************************************************************************
-#define  AUD_INT_DMA_CTL           0x140500	// Audio Int DMA control
+/* ***************************************************************************** */
+#define  AUD_INT_DMA_CTL           0x140500	/* Audio Int DMA control */
 
 #define  FLD_AUD_SRC_E_RISC_EN     0x00008000
 #define  FLD_AUD_SRC_C_RISC_EN     0x00004000
@@ -1384,15 +1384,15 @@
 #define  FLD_AUD_DST_B_FIFO_EN     0x00000002
 #define  FLD_AUD_DST_A_FIFO_EN     0x00000001
 
-//*****************************************************************************
-//
-//                   Mobilygen Interface Registers
-//
-//*****************************************************************************
-// Mobilygen Interface A
-//*****************************************************************************
-#define  MB_IF_A_DMA               0x150000	// MBIF A DMA data port
-#define  MB_IF_A_GPCN              0x150008	// MBIF A GP counter
+/* ***************************************************************************** */
+/*  */
+/* Mobilygen Interface Registers */
+/*  */
+/* ***************************************************************************** */
+/* Mobilygen Interface A */
+/* ***************************************************************************** */
+#define  MB_IF_A_DMA               0x150000	/* MBIF A DMA data port */
+#define  MB_IF_A_GPCN              0x150008	/* MBIF A GP counter */
 #define  MB_IF_A_GPCN_CTRL         0x15000C
 #define  MB_IF_A_DMA_CTRL          0x150010
 #define  MB_IF_A_LENGTH            0x150014
@@ -1415,11 +1415,11 @@
 #define  MB_IF_A_DATA_STRUCT_D     0x150058
 #define  MB_IF_A_DATA_STRUCT_E     0x15005C
 #define  MB_IF_A_DATA_STRUCT_F     0x150060
-//*****************************************************************************
-// Mobilygen Interface B
-//*****************************************************************************
-#define  MB_IF_B_DMA               0x160000	// MBIF A DMA data port
-#define  MB_IF_B_GPCN              0x160008	// MBIF A GP counter
+/* ***************************************************************************** */
+/* Mobilygen Interface B */
+/* ***************************************************************************** */
+#define  MB_IF_B_DMA               0x160000	/* MBIF A DMA data port */
+#define  MB_IF_B_GPCN              0x160008	/* MBIF A GP counter */
 #define  MB_IF_B_GPCN_CTRL         0x16000C
 #define  MB_IF_B_DMA_CTRL          0x160010
 #define  MB_IF_B_LENGTH            0x160014
@@ -1443,14 +1443,14 @@
 #define  MB_IF_B_DATA_STRUCT_E     0x16005C
 #define  MB_IF_B_DATA_STRUCT_F     0x160060
 
-// MB_DMA_CTRL
+/* MB_DMA_CTRL */
 #define  FLD_MB_IF_RISC_EN         0x00000010
 #define  FLD_MB_IF_FIFO_EN         0x00000001
 
-// MB_LENGTH
+/* MB_LENGTH */
 #define  FLD_MB_IF_LN_LNGTH        0x00000FFF
 
-// MB_HCMD register
+/* MB_HCMD register */
 #define  FLD_MB_HCMD_H_GO          0x80000000
 #define  FLD_MB_HCMD_H_BUSY        0x40000000
 #define  FLD_MB_HCMD_H_DMA_HOLD    0x10000000
@@ -1461,118 +1461,118 @@
 #define  FLD_MB_HCMD_H_ADDR        0x00FF0000
 #define  FLD_MB_HCMD_H_DATA        0x0000FFFF
 
-//*****************************************************************************
-// I2C #1
-//*****************************************************************************
-#define  I2C1_ADDR                 0x180000	// I2C #1 address
-#define  FLD_I2C_DADDR             0xfe000000	// RW [31:25] I2C Device Address
-						 // RO [24] reserved
-//*****************************************************************************
-#define  FLD_I2C_SADDR             0x00FFFFFF	// RW [23:0]  I2C Sub-address
-
-//*****************************************************************************
-#define  I2C1_WDATA                0x180004	// I2C #1 write data
-#define  FLD_I2C_WDATA             0xFFFFFFFF	// RW [31:0]
-
-//*****************************************************************************
-#define  I2C1_CTRL                 0x180008	// I2C #1 control
-#define  FLD_I2C_PERIOD            0xFF000000	// RW [31:24]
-#define  FLD_I2C_SCL_IN            0x00200000	// RW [21]
-#define  FLD_I2C_SDA_IN            0x00100000	// RW [20]
-						 // RO [19:18] reserved
-#define  FLD_I2C_SCL_OUT           0x00020000	// RW [17]
-#define  FLD_I2C_SDA_OUT           0x00010000	// RW [16]
-						 // RO [15] reserved
-#define  FLD_I2C_DATA_LEN          0x00007000	// RW [14:12]
-#define  FLD_I2C_SADDR_INC         0x00000800	// RW [11]
-						 // RO [10:9] reserved
-#define  FLD_I2C_SADDR_LEN         0x00000300	// RW [9:8]
-						 // RO [7:6] reserved
-#define  FLD_I2C_SOFT              0x00000020	// RW [5]
-#define  FLD_I2C_NOSTOP            0x00000010	// RW [4]
-#define  FLD_I2C_EXTEND            0x00000008	// RW [3]
-#define  FLD_I2C_SYNC              0x00000004	// RW [2]
-#define  FLD_I2C_READ_SA           0x00000002	// RW [1]
-#define  FLD_I2C_READ_WRN          0x00000001	// RW [0]
-
-//*****************************************************************************
-#define  I2C1_RDATA                0x18000C	// I2C #1 read data
-#define  FLD_I2C_RDATA             0xFFFFFFFF	// RO [31:0]
-
-//*****************************************************************************
-#define  I2C1_STAT                 0x180010	// I2C #1 status
-#define  FLD_I2C_XFER_IN_PROG      0x00000002	// RO [1]
-#define  FLD_I2C_RACK              0x00000001	// RO [0]
-
-//*****************************************************************************
-// I2C #2
-//*****************************************************************************
-#define  I2C2_ADDR                 0x190000	// I2C #2 address
-
-//*****************************************************************************
-#define  I2C2_WDATA                0x190004	// I2C #2 write data
-
-//*****************************************************************************
-#define  I2C2_CTRL                 0x190008	// I2C #2 control
-
-//*****************************************************************************
-#define  I2C2_RDATA                0x19000C	// I2C #2 read data
-
-//*****************************************************************************
-#define  I2C2_STAT                 0x190010	// I2C #2 status
-
-//*****************************************************************************
-// I2C #3
-//*****************************************************************************
-#define  I2C3_ADDR                 0x1A0000	// I2C #3 address
-
-//*****************************************************************************
-#define  I2C3_WDATA                0x1A0004	// I2C #3 write data
-
-//*****************************************************************************
-#define  I2C3_CTRL                 0x1A0008	// I2C #3 control
-
-//*****************************************************************************
-#define  I2C3_RDATA                0x1A000C	// I2C #3 read data
-
-//*****************************************************************************
-#define  I2C3_STAT                 0x1A0010	// I2C #3 status
-
-//*****************************************************************************
-// UART
-//*****************************************************************************
-#define  UART_CTL                  0x1B0000	// UART Control Register
-#define  FLD_LOOP_BACK_EN          (1 << 7)	// RW field - default 0
-#define  FLD_RX_TRG_SZ             (3 << 2)	// RW field - default 0
-#define  FLD_RX_EN                 (1 << 1)	// RW field - default 0
-#define  FLD_TX_EN                 (1 << 0)	// RW field - default 0
-
-//*****************************************************************************
-#define  UART_BRD                  0x1B0004	// UART Baud Rate Divisor
-#define  FLD_BRD                   0x0000FFFF	// RW field - default 0x197
-
-//*****************************************************************************
-#define  UART_DBUF                 0x1B0008	// UART Tx/Rx Data BuFFer
-#define  FLD_DB                    0xFFFFFFFF	// RW field - default 0
-
-//*****************************************************************************
-#define  UART_ISR                  0x1B000C	// UART Interrupt Status
-#define  FLD_RXD_TIMEOUT_EN        (1 << 7)	// RW field - default 0
-#define  FLD_FRM_ERR_EN            (1 << 6)	// RW field - default 0
-#define  FLD_RXD_RDY_EN            (1 << 5)	// RW field - default 0
-#define  FLD_TXD_EMPTY_EN          (1 << 4)	// RW field - default 0
-#define  FLD_RXD_OVERFLOW          (1 << 3)	// RW field - default 0
-#define  FLD_FRM_ERR               (1 << 2)	// RW field - default 0
-#define  FLD_RXD_RDY               (1 << 1)	// RW field - default 0
-#define  FLD_TXD_EMPTY             (1 << 0)	// RW field - default 0
-
-//*****************************************************************************
-#define  UART_CNT                  0x1B0010	// UART Tx/Rx FIFO Byte Count
-#define  FLD_TXD_CNT               (0x1F << 8)	// RW field - default 0
-#define  FLD_RXD_CNT               (0x1F << 0)	// RW field - default 0
-
-//*****************************************************************************
-// Motion Detection
+/* ***************************************************************************** */
+/* I2C #1 */
+/* ***************************************************************************** */
+#define  I2C1_ADDR                 0x180000	/* I2C #1 address */
+#define  FLD_I2C_DADDR             0xfe000000	/* RW [31:25] I2C Device Address */
+						 /* RO [24] reserved */
+/* ***************************************************************************** */
+#define  FLD_I2C_SADDR             0x00FFFFFF	/* RW [23:0]  I2C Sub-address */
+
+/* ***************************************************************************** */
+#define  I2C1_WDATA                0x180004	/* I2C #1 write data */
+#define  FLD_I2C_WDATA             0xFFFFFFFF	/* RW [31:0] */
+
+/* ***************************************************************************** */
+#define  I2C1_CTRL                 0x180008	/* I2C #1 control */
+#define  FLD_I2C_PERIOD            0xFF000000	/* RW [31:24] */
+#define  FLD_I2C_SCL_IN            0x00200000	/* RW [21] */
+#define  FLD_I2C_SDA_IN            0x00100000	/* RW [20] */
+						 /* RO [19:18] reserved */
+#define  FLD_I2C_SCL_OUT           0x00020000	/* RW [17] */
+#define  FLD_I2C_SDA_OUT           0x00010000	/* RW [16] */
+						 /* RO [15] reserved */
+#define  FLD_I2C_DATA_LEN          0x00007000	/* RW [14:12] */
+#define  FLD_I2C_SADDR_INC         0x00000800	/* RW [11] */
+						 /* RO [10:9] reserved */
+#define  FLD_I2C_SADDR_LEN         0x00000300	/* RW [9:8] */
+						 /* RO [7:6] reserved */
+#define  FLD_I2C_SOFT              0x00000020	/* RW [5] */
+#define  FLD_I2C_NOSTOP            0x00000010	/* RW [4] */
+#define  FLD_I2C_EXTEND            0x00000008	/* RW [3] */
+#define  FLD_I2C_SYNC              0x00000004	/* RW [2] */
+#define  FLD_I2C_READ_SA           0x00000002	/* RW [1] */
+#define  FLD_I2C_READ_WRN          0x00000001	/* RW [0] */
+
+/* ***************************************************************************** */
+#define  I2C1_RDATA                0x18000C	/* I2C #1 read data */
+#define  FLD_I2C_RDATA             0xFFFFFFFF	/* RO [31:0] */
+
+/* ***************************************************************************** */
+#define  I2C1_STAT                 0x180010	/* I2C #1 status */
+#define  FLD_I2C_XFER_IN_PROG      0x00000002	/* RO [1] */
+#define  FLD_I2C_RACK              0x00000001	/* RO [0] */
+
+/* ***************************************************************************** */
+/* I2C #2 */
+/* ***************************************************************************** */
+#define  I2C2_ADDR                 0x190000	/* I2C #2 address */
+
+/* ***************************************************************************** */
+#define  I2C2_WDATA                0x190004	/* I2C #2 write data */
+
+/* ***************************************************************************** */
+#define  I2C2_CTRL                 0x190008	/* I2C #2 control */
+
+/* ***************************************************************************** */
+#define  I2C2_RDATA                0x19000C	/* I2C #2 read data */
+
+/* ***************************************************************************** */
+#define  I2C2_STAT                 0x190010	/* I2C #2 status */
+
+/* ***************************************************************************** */
+/* I2C #3 */
+/* ***************************************************************************** */
+#define  I2C3_ADDR                 0x1A0000	/* I2C #3 address */
+
+/* ***************************************************************************** */
+#define  I2C3_WDATA                0x1A0004	/* I2C #3 write data */
+
+/* ***************************************************************************** */
+#define  I2C3_CTRL                 0x1A0008	/* I2C #3 control */
+
+/* ***************************************************************************** */
+#define  I2C3_RDATA                0x1A000C	/* I2C #3 read data */
+
+/* ***************************************************************************** */
+#define  I2C3_STAT                 0x1A0010	/* I2C #3 status */
+
+/* ***************************************************************************** */
+/* UART */
+/* ***************************************************************************** */
+#define  UART_CTL                  0x1B0000	/* UART Control Register */
+#define  FLD_LOOP_BACK_EN          (1 << 7)	/* RW field - default 0 */
+#define  FLD_RX_TRG_SZ             (3 << 2)	/* RW field - default 0 */
+#define  FLD_RX_EN                 (1 << 1)	/* RW field - default 0 */
+#define  FLD_TX_EN                 (1 << 0)	/* RW field - default 0 */
+
+/* ***************************************************************************** */
+#define  UART_BRD                  0x1B0004	/* UART Baud Rate Divisor */
+#define  FLD_BRD                   0x0000FFFF	/* RW field - default 0x197 */
+
+/* ***************************************************************************** */
+#define  UART_DBUF                 0x1B0008	/* UART Tx/Rx Data BuFFer */
+#define  FLD_DB                    0xFFFFFFFF	/* RW field - default 0 */
+
+/* ***************************************************************************** */
+#define  UART_ISR                  0x1B000C	/* UART Interrupt Status */
+#define  FLD_RXD_TIMEOUT_EN        (1 << 7)	/* RW field - default 0 */
+#define  FLD_FRM_ERR_EN            (1 << 6)	/* RW field - default 0 */
+#define  FLD_RXD_RDY_EN            (1 << 5)	/* RW field - default 0 */
+#define  FLD_TXD_EMPTY_EN          (1 << 4)	/* RW field - default 0 */
+#define  FLD_RXD_OVERFLOW          (1 << 3)	/* RW field - default 0 */
+#define  FLD_FRM_ERR               (1 << 2)	/* RW field - default 0 */
+#define  FLD_RXD_RDY               (1 << 1)	/* RW field - default 0 */
+#define  FLD_TXD_EMPTY             (1 << 0)	/* RW field - default 0 */
+
+/* ***************************************************************************** */
+#define  UART_CNT                  0x1B0010	/* UART Tx/Rx FIFO Byte Count */
+#define  FLD_TXD_CNT               (0x1F << 8)	/* RW field - default 0 */
+#define  FLD_RXD_CNT               (0x1F << 0)	/* RW field - default 0 */
+
+/* ***************************************************************************** */
+/* Motion Detection */
 #define  MD_CH0_GRID_BLOCK_YCNT    0x170014
 #define  MD_CH1_GRID_BLOCK_YCNT    0x170094
 #define  MD_CH2_GRID_BLOCK_YCNT    0x170114
@@ -1589,4 +1589,4 @@
 #define PIXEL_ENGINE_VIP1 0
 #define PIXEL_ENGINE_VIP2 1
 
-#endif //Athena_REGISTERS
+#endif /* Athena_REGISTERS */
diff --git a/drivers/staging/cx25821/cx25821-sram.h b/drivers/staging/cx25821/cx25821-sram.h
index bd677ee2299..5f05d153bc4 100644
--- a/drivers/staging/cx25821/cx25821-sram.h
+++ b/drivers/staging/cx25821/cx25821-sram.h
@@ -23,34 +23,34 @@
 #ifndef __ATHENA_SRAM_H__
 #define __ATHENA_SRAM_H__
 
-//#define RX_SRAM_START_SIZE        = 0;  //  Start of reserved SRAM
-#define VID_CMDS_SIZE             80	//  Video CMDS size in bytes
-#define AUDIO_CMDS_SIZE           80	//  AUDIO CMDS size in bytes
-#define MBIF_CMDS_SIZE            80	//  MBIF  CMDS size in bytes
+/* #define RX_SRAM_START_SIZE        = 0;  //  Start of reserved SRAM */
+#define VID_CMDS_SIZE             80	/* Video CMDS size in bytes */
+#define AUDIO_CMDS_SIZE           80	/* AUDIO CMDS size in bytes */
+#define MBIF_CMDS_SIZE            80	/* MBIF  CMDS size in bytes */
 
-//#define RX_SRAM_POOL_START_SIZE   = 0;  //  Start of useable RX SRAM for buffers
-#define VID_IQ_SIZE               64	//  VID instruction queue size in bytes
+/* #define RX_SRAM_POOL_START_SIZE   = 0;  //  Start of useable RX SRAM for buffers */
+#define VID_IQ_SIZE               64	/* VID instruction queue size in bytes */
 #define MBIF_IQ_SIZE              64
-#define AUDIO_IQ_SIZE             64	//  AUD instruction queue size in bytes
+#define AUDIO_IQ_SIZE             64	/* AUD instruction queue size in bytes */
 
-#define VID_CDT_SIZE              64	//  VID cluster descriptor table size in bytes
-#define MBIF_CDT_SIZE             64	//  MBIF/HBI cluster descriptor table size in bytes
-#define AUDIO_CDT_SIZE            48	//  AUD cluster descriptor table size in bytes
+#define VID_CDT_SIZE              64	/* VID cluster descriptor table size in bytes */
+#define MBIF_CDT_SIZE             64	/* MBIF/HBI cluster descriptor table size in bytes */
+#define AUDIO_CDT_SIZE            48	/* AUD cluster descriptor table size in bytes */
 
-//#define RX_SRAM_POOL_FREE_SIZE    = 16; //  Start of available RX SRAM
-//#define RX_SRAM_END_SIZE          = 0;  //  End of RX SRAM
+/* #define RX_SRAM_POOL_FREE_SIZE    = 16; //  Start of available RX SRAM */
+/* #define RX_SRAM_END_SIZE          = 0;  //  End of RX SRAM */
 
-//#define TX_SRAM_POOL_START_SIZE   = 0;  //  Start of transmit pool SRAM
-//#define MSI_DATA_SIZE             = 64; //  Reserved (MSI Data, RISC working stora
+/* #define TX_SRAM_POOL_START_SIZE   = 0;  //  Start of transmit pool SRAM */
+/* #define MSI_DATA_SIZE             = 64; //  Reserved (MSI Data, RISC working stora */
 
-#define VID_CLUSTER_SIZE          1440	//  VID cluster data line
-#define AUDIO_CLUSTER_SIZE        128	//  AUDIO cluster data line
-#define MBIF_CLUSTER_SIZE         1440	//  MBIF/HBI cluster data line
+#define VID_CLUSTER_SIZE          1440	/* VID cluster data line */
+#define AUDIO_CLUSTER_SIZE        128	/* AUDIO cluster data line */
+#define MBIF_CLUSTER_SIZE         1440	/* MBIF/HBI cluster data line */
 
-//#define TX_SRAM_POOL_FREE_SIZE    = 704;    //  Start of available TX SRAM
-//#define TX_SRAM_END_SIZE          = 0;      //  End of TX SRAM
+/* #define TX_SRAM_POOL_FREE_SIZE    = 704;    //  Start of available TX SRAM */
+/* #define TX_SRAM_END_SIZE          = 0;      //  End of TX SRAM */
 
-// Receive SRAM
+/* Receive SRAM */
 #define RX_SRAM_START             0x10000
 #define VID_A_DOWN_CMDS           0x10000
 #define VID_B_DOWN_CMDS           0x10050
@@ -78,9 +78,9 @@
 #define AUD_E_UP_CMDS             0x10730
 #define MBIF_A_DOWN_CMDS          0x10780
 #define MBIF_B_DOWN_CMDS          0x107D0
-#define DMA_SCRATCH_PAD           0x10820	// Scratch pad area from 0x10820 to 0x10B40
+#define DMA_SCRATCH_PAD           0x10820	/* Scratch pad area from 0x10820 to 0x10B40 */
 
-//#define RX_SRAM_POOL_START        = 0x105B0;
+/* #define RX_SRAM_POOL_START        = 0x105B0; */
 
 #define VID_A_IQ                  0x11000
 #define VID_B_IQ                  0x11040
@@ -118,7 +118,7 @@
 #define MBIF_A_CDT                0x10C00
 #define MBIF_B_CDT                0x10CC0
 
-// Cluster Buffer for RX
+/* Cluster Buffer for RX */
 #define VID_A_UP_CLUSTER_1        0x11400
 #define VID_A_UP_CLUSTER_2        0x119A0
 #define VID_A_UP_CLUSTER_3        0x11F40
@@ -178,9 +178,9 @@
 #define RX_SRAM_POOL_FREE         0x1CE00
 #define RX_SRAM_END               0x1D000
 
-// Free Receive SRAM    144 Bytes
+/* Free Receive SRAM    144 Bytes */
 
-// Transmit SRAM
+/* Transmit SRAM */
 #define TX_SRAM_POOL_START        0x00000
 
 #define VID_A_DOWN_CLUSTER_1      0x00040
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
index 343df6619fe..d12dbb572e8 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
+++ b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
@@ -84,7 +84,7 @@ static __le32 *cx25821_risc_field_upstream_ch2(struct cx25821_dev *dev,
 {
 	unsigned int line, i;
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[dev->_channel2_upstream_select];
+	   dev->channels[dev->_channel2_upstream_select].sram_channels;
 	int dist_betwn_starts = bpl * 2;
 
 	/* sync instruction */
@@ -110,8 +110,11 @@ static __le32 *cx25821_risc_field_upstream_ch2(struct cx25821_dev *dev,
 			offset += dist_betwn_starts;
 		}
 
-		// check if we need to enable the FIFO after the first 4 lines
-		// For the upstream video channel, the risc engine will enable the FIFO.
+	       /*
+		 check if we need to enable the FIFO after the first 4 lines
+		  For the upstream video channel, the risc engine will enable
+		  the FIFO.
+	       */
 		if (fifo_enable && line == 3) {
 			*(rp++) = RISC_WRITECR;
 			*(rp++) = sram_ch->dma_ctl;
@@ -130,7 +133,7 @@ int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,
 {
 	__le32 *rp;
 	int fifo_enable = 0;
-	int singlefield_lines = lines >> 1;	//get line count for single field
+       int singlefield_lines = lines >> 1; /*get line count for single field */
 	int odd_num_lines = singlefield_lines;
 	int frame = 0;
 	int frame_size = 0;
@@ -174,7 +177,7 @@ int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,
 
 		fifo_enable = FIFO_DISABLE;
 
-		//Even field
+	       /* Even field */
 		rp = cx25821_risc_field_upstream_ch2(dev, rp,
 						     dev->
 						     _data_buf_phys_addr_ch2 +
@@ -192,7 +195,10 @@ int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,
 			risc_phys_jump_addr = dev->_dma_phys_start_addr_ch2;
 		}
 
-		// Loop to 2ndFrameRISC or to Start of Risc program & generate IRQ
+	       /*
+		  Loop to 2ndFrameRISC or to Start of
+		  Risc program & generate IRQ
+	       */
 		*(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag);
 		*(rp++) = cpu_to_le32(risc_phys_jump_addr);
 		*(rp++) = cpu_to_le32(0);
@@ -204,7 +210,7 @@ int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,
 void cx25821_stop_upstream_video_ch2(struct cx25821_dev *dev)
 {
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[VID_UPSTREAM_SRAM_CHANNEL_J];
+	   dev->channels[VID_UPSTREAM_SRAM_CHANNEL_J].sram_channels;
 	u32 tmp = 0;
 
 	if (!dev->_is_running_ch2) {
@@ -212,15 +218,15 @@ void cx25821_stop_upstream_video_ch2(struct cx25821_dev *dev)
 		    ("cx25821: No video file is currently running so return!\n");
 		return;
 	}
-	//Disable RISC interrupts
+       /* Disable RISC interrupts */
 	tmp = cx_read(sram_ch->int_msk);
 	cx_write(sram_ch->int_msk, tmp & ~_intr_msk);
 
-	//Turn OFF risc and fifo
+       /* Turn OFF risc and fifo */
 	tmp = cx_read(sram_ch->dma_ctl);
 	cx_write(sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN));
 
-	//Clear data buffer memory
+       /* Clear data buffer memory */
 	if (dev->_data_buf_virt_addr_ch2)
 		memset(dev->_data_buf_virt_addr_ch2, 0,
 		       dev->_data_buf_size_ch2);
@@ -371,8 +377,8 @@ static void cx25821_vidups_handler_ch2(struct work_struct *work)
 	}
 
 	cx25821_get_frame_ch2(dev,
-			      &dev->sram_channels[dev->
-						  _channel2_upstream_select]);
+			     dev->channels[dev->
+			       _channel2_upstream_select].sram_channels);
 }
 
 int cx25821_openfile_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch)
@@ -488,7 +494,7 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 		return -ENOMEM;
 	}
 
-	//Iniitize at this address until n bytes to 0
+       /* Iniitize at this address until n bytes to 0 */
 	memset(dev->_dma_virt_addr_ch2, 0, dev->_risc_size_ch2);
 
 	if (dev->_data_buf_virt_addr_ch2 != NULL) {
@@ -496,7 +502,7 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 				    dev->_data_buf_virt_addr_ch2,
 				    dev->_data_buf_phys_addr_ch2);
 	}
-	//For Video Data buffer allocation
+       /* For Video Data buffer allocation */
 	dev->_data_buf_virt_addr_ch2 =
 	    pci_alloc_consistent(dev->pci, dev->upstream_databuf_size_ch2,
 				 &data_dma_addr);
@@ -509,14 +515,14 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 		return -ENOMEM;
 	}
 
-	//Initialize at this address until n bytes to 0
+       /* Initialize at this address until n bytes to 0 */
 	memset(dev->_data_buf_virt_addr_ch2, 0, dev->_data_buf_size_ch2);
 
 	ret = cx25821_openfile_ch2(dev, sram_ch);
 	if (ret < 0)
 		return ret;
 
-	//Creating RISC programs
+       /* Creating RISC programs */
 	ret =
 	    cx25821_risc_buffer_upstream_ch2(dev, dev->pci, 0, bpl,
 					     dev->_lines_count_ch2);
@@ -536,7 +542,7 @@ int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num,
 				   u32 status)
 {
 	u32 int_msk_tmp;
-	struct sram_channel *channel = &dev->sram_channels[chan_num];
+       struct sram_channel *channel = dev->channels[chan_num].sram_channels;
 	int singlefield_lines = NTSC_FIELD_HEIGHT;
 	int line_size_in_bytes = Y422_LINE_SZ;
 	int odd_risc_prog_size = 0;
@@ -544,10 +550,13 @@ int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num,
 	__le32 *rp;
 
 	if (status & FLD_VID_SRC_RISC1) {
-		// We should only process one program per call
+	       /* We should only process one program per call */
 		u32 prog_cnt = cx_read(channel->gpcnt);
 
-		//Since we've identified our IRQ, clear our bits from the interrupt mask and interrupt status registers
+	       /*
+		  Since we've identified our IRQ, clear our bits from the
+		  interrupt mask and interrupt status registers
+	       */
 		int_msk_tmp = cx_read(channel->int_msk);
 		cx_write(channel->int_msk, int_msk_tmp & ~_intr_msk);
 		cx_write(channel->int_stat, _intr_msk);
@@ -588,7 +597,7 @@ int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num,
 								    FIFO_DISABLE,
 								    ODD_FIELD);
 
-				// Jump to Even Risc program of 1st Frame
+			       /* Jump to Even Risc program of 1st Frame */
 				*(rp++) = cpu_to_le32(RISC_JUMP);
 				*(rp++) = cpu_to_le32(risc_phys_jump_addr);
 				*(rp++) = cpu_to_le32(0);
@@ -603,7 +612,7 @@ int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num,
 		       dev->_frame_count_ch2);
 		return -1;
 	}
-	//ElSE, set the interrupt mask register, re-enable irq.
+       /* ElSE, set the interrupt mask register, re-enable irq. */
 	int_msk_tmp = cx_read(channel->int_msk);
 	cx_write(channel->int_msk, int_msk_tmp |= _intr_msk);
 
@@ -623,12 +632,12 @@ static irqreturn_t cx25821_upstream_irq_ch2(int irq, void *dev_id)
 
 	channel_num = VID_UPSTREAM_SRAM_CHANNEL_J;
 
-	sram_ch = &dev->sram_channels[channel_num];
+       sram_ch = dev->channels[channel_num].sram_channels;
 
 	msk_stat = cx_read(sram_ch->int_mstat);
 	vid_status = cx_read(sram_ch->int_stat);
 
-	// Only deal with our interrupt
+       /* Only deal with our interrupt */
 	if (vid_status) {
 		handled =
 		    cx25821_video_upstream_irq_ch2(dev, channel_num,
@@ -658,7 +667,10 @@ static void cx25821_set_pixelengine_ch2(struct cx25821_dev *dev,
 	value |= dev->_isNTSC_ch2 ? 0 : 0x10;
 	cx_write(ch->vid_fmt_ctl, value);
 
-	// set number of active pixels in each line. Default is 720 pixels in both NTSC and PAL format
+       /*
+	  set number of active pixels in each line. Default is 720
+	  pixels in both NTSC and PAL format
+       */
 	cx_write(ch->vid_active_ctl1, width);
 
 	num_lines = (height / 2) & 0x3FF;
@@ -670,7 +682,7 @@ static void cx25821_set_pixelengine_ch2(struct cx25821_dev *dev,
 
 	value = (num_lines << 16) | odd_num_lines;
 
-	// set number of active lines in field 0 (top) and field 1 (bottom)
+       /* set number of active lines in field 0 (top) and field 1 (bottom) */
 	cx_write(ch->vid_active_ctl2, value);
 
 	cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3);
@@ -682,21 +694,27 @@ int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev,
 	u32 tmp = 0;
 	int err = 0;
 
-	// 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for channel A-C
+       /*
+	  656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface
+	  for channel A-C
+       */
 	tmp = cx_read(VID_CH_MODE_SEL);
 	cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF);
 
-	// Set the physical start address of the RISC program in the initial program counter(IPC) member of the cmds.
+       /*
+	  Set the physical start address of the RISC program in the initial
+	  program counter(IPC) member of the cmds.
+       */
 	cx_write(sram_ch->cmds_start + 0, dev->_dma_phys_addr_ch2);
-	cx_write(sram_ch->cmds_start + 4, 0);	/* Risc IPC High 64 bits 63-32 */
+       cx_write(sram_ch->cmds_start + 4, 0); /* Risc IPC High 64 bits 63-32 */
 
 	/* reset counter */
 	cx_write(sram_ch->gpcnt_ctl, 3);
 
-	// Clear our bits from the interrupt status register.
+       /* Clear our bits from the interrupt status register. */
 	cx_write(sram_ch->int_stat, _intr_msk);
 
-	//Set the interrupt mask register, enable irq.
+       /* Set the interrupt mask register, enable irq. */
 	cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
 	tmp = cx_read(sram_ch->int_msk);
 	cx_write(sram_ch->int_msk, tmp |= _intr_msk);
@@ -709,7 +727,7 @@ int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev,
 		       dev->pci->irq);
 		goto fail_irq;
 	}
-	// Start the DMA  engine
+       /* Start the DMA  engine */
 	tmp = cx_read(sram_ch->dma_ctl);
 	cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN);
 
@@ -740,7 +758,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 	}
 
 	dev->_channel2_upstream_select = channel_select;
-	sram_ch = &dev->sram_channels[channel_select];
+       sram_ch = dev->channels[channel_select].sram_channels;
 
 	INIT_WORK(&dev->_irq_work_entry_ch2, cx25821_vidups_handler_ch2);
 	dev->_irq_queues_ch2 =
@@ -751,7 +769,10 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 		    ("cx25821: create_singlethread_workqueue() for Video FAILED!\n");
 		return -ENOMEM;
 	}
-	// 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for channel A-C
+       /*
+	  656/VIP SRC Upstream Channel I & J and 7 -
+	  Host Bus Interface for channel A-C
+       */
 	tmp = cx_read(VID_CH_MODE_SEL);
 	cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF);
 
@@ -787,7 +808,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 		       str_length + 1);
 	}
 
-	//Default if filename is empty string
+       /* Default if filename is empty string */
 	if (strcmp(dev->input_filename_ch2, "") == 0) {
 		if (dev->_isNTSC_ch2) {
 			dev->_filename_ch2 =
@@ -812,7 +833,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 	dev->upstream_riscbuf_size_ch2 = risc_buffer_size * 2;
 	dev->upstream_databuf_size_ch2 = data_frame_size * 2;
 
-	//Allocating buffers and prepare RISC program
+       /* Allocating buffers and prepare RISC program */
 	retval =
 	    cx25821_upstream_buffer_prepare_ch2(dev, sram_ch,
 						dev->_line_size_ch2);
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.h b/drivers/staging/cx25821/cx25821-video-upstream-ch2.h
index 73feea114c1..62340636c91 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream-ch2.h
+++ b/drivers/staging/cx25821/cx25821-video-upstream-ch2.h
@@ -37,7 +37,7 @@
 #define RESET_STATUS          -1
 #define NUM_NO_OPS            5
 
-// PAL and NTSC line sizes and number of lines.
+/* PAL and NTSC line sizes and number of lines. */
 #define WIDTH_D1              720
 #define NTSC_LINES_PER_FRAME  480
 #define PAL_LINES_PER_FRAME   576
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.c b/drivers/staging/cx25821/cx25821-video-upstream.c
index 7a3dad91eba..756a820a76c 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream.c
+++ b/drivers/staging/cx25821/cx25821-video-upstream.c
@@ -134,7 +134,7 @@ static __le32 *cx25821_risc_field_upstream(struct cx25821_dev *dev, __le32 * rp,
 {
 	unsigned int line, i;
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[dev->_channel_upstream_select];
+	   dev->channels[dev->_channel_upstream_select].sram_channels;
 	int dist_betwn_starts = bpl * 2;
 
 	/* sync instruction */
@@ -253,7 +253,7 @@ int cx25821_risc_buffer_upstream(struct cx25821_dev *dev,
 void cx25821_stop_upstream_video_ch1(struct cx25821_dev *dev)
 {
 	struct sram_channel *sram_ch =
-	    &dev->sram_channels[VID_UPSTREAM_SRAM_CHANNEL_I];
+	   dev->channels[VID_UPSTREAM_SRAM_CHANNEL_I].sram_channels;
 	u32 tmp = 0;
 
 	if (!dev->_is_running) {
@@ -346,20 +346,23 @@ int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk(KERN_ERR "%s(): ERROR opening file(%s) with errno = %d!\n",
-		       __func__, dev->_filename, open_errno);
+	       printk(KERN_ERR
+		   "%s(): ERROR opening file(%s) with errno = %d!\n",
+		   __func__, dev->_filename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR "%s: File has no file operations registered!",
-			       __func__);
+		       printk(KERN_ERR
+			   "%s: File has no file operations registered!",
+			   __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk(KERN_ERR "%s: File has no READ operations registered!",
-			       __func__);
+		       printk(KERN_ERR
+			   "%s: File has no READ operations registered!",
+			   __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
@@ -386,7 +389,8 @@ int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 			if (vfs_read_retval < line_size) {
 				printk(KERN_INFO
-				       "Done: exit %s() since no more bytes to read from Video file.\n",
+				      "Done: exit %s() since no more bytes to \
+				      read from Video file.\n",
 				       __func__);
 				break;
 			}
@@ -411,13 +415,15 @@ static void cx25821_vidups_handler(struct work_struct *work)
 	    container_of(work, struct cx25821_dev, _irq_work_entry);
 
 	if (!dev) {
-		printk(KERN_ERR "ERROR %s(): since container_of(work_struct) FAILED!\n",
-		       __func__);
+	       printk(KERN_ERR
+		   "ERROR %s(): since container_of(work_struct) FAILED!\n",
+		   __func__);
 		return;
 	}
 
 	cx25821_get_frame(dev,
-			  &dev->sram_channels[dev->_channel_upstream_select]);
+			 dev->channels[dev->_channel_upstream_select].
+					       sram_channels);
 }
 
 int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
@@ -437,20 +443,22 @@ int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk(KERN_ERR "%s(): ERROR opening file(%s) with errno = %d!\n",
+	       printk(KERN_ERR  "%s(): ERROR opening file(%s) with errno = %d!\n",
 		       __func__, dev->_filename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR "%s: File has no file operations registered!",
-			       __func__);
+		       printk(KERN_ERR
+			   "%s: File has no file operations registered!",
+			   __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk
-			    (KERN_ERR "%s: File has no READ operations registered!  Returning.",
+		       printk(KERN_ERR
+			   "%s: File has no READ operations registered!  \
+			   Returning.",
 			     __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -480,7 +488,8 @@ int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 				if (vfs_read_retval < line_size) {
 					printk(KERN_INFO
-					       "Done: exit %s() since no more bytes to read from Video file.\n",
+					    "Done: exit %s() since no more \
+					    bytes to read from Video file.\n",
 					       __func__);
 					break;
 				}
@@ -526,7 +535,8 @@ int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
 
 	if (!dev->_dma_virt_addr) {
 		printk
-		    (KERN_ERR "cx25821: FAILED to allocate memory for Risc buffer! Returning.\n");
+		   (KERN_ERR "cx25821: FAILED to allocate memory for Risc \
+		   buffer! Returning.\n");
 		return -ENOMEM;
 	}
 
@@ -547,7 +557,8 @@ int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
 
 	if (!dev->_data_buf_virt_addr) {
 		printk
-		    (KERN_ERR "cx25821: FAILED to allocate memory for data buffer! Returning.\n");
+		   (KERN_ERR "cx25821: FAILED to allocate memory for data \
+		   buffer! Returning.\n");
 		return -ENOMEM;
 	}
 
@@ -578,7 +589,7 @@ int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num,
 			       u32 status)
 {
 	u32 int_msk_tmp;
-	struct sram_channel *channel = &dev->sram_channels[chan_num];
+       struct sram_channel *channel = dev->channels[chan_num].sram_channels;
 	int singlefield_lines = NTSC_FIELD_HEIGHT;
 	int line_size_in_bytes = Y422_LINE_SZ;
 	int odd_risc_prog_size = 0;
@@ -642,16 +653,16 @@ int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num,
 	} else {
 		if (status & FLD_VID_SRC_UF)
 			printk
-			    (KERN_ERR "%s: Video Received Underflow Error Interrupt!\n",
-			     __func__);
+			   (KERN_ERR "%s: Video Received Underflow Error \
+			   Interrupt!\n", __func__);
 
 		if (status & FLD_VID_SRC_SYNC)
-			printk(KERN_ERR "%s: Video Received Sync Error Interrupt!\n",
-			       __func__);
+		       printk(KERN_ERR "%s: Video Received Sync Error \
+		       Interrupt!\n", __func__);
 
 		if (status & FLD_VID_SRC_OPC_ERR)
-			printk(KERN_ERR "%s: Video Received OpCode Error Interrupt!\n",
-			       __func__);
+		       printk(KERN_ERR "%s: Video Received OpCode Error \
+		       Interrupt!\n", __func__);
 	}
 
 	if (dev->_file_status == END_OF_FILE) {
@@ -679,7 +690,7 @@ static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id)
 
 	channel_num = VID_UPSTREAM_SRAM_CHANNEL_I;
 
-	sram_ch = &dev->sram_channels[channel_num];
+       sram_ch = dev->channels[channel_num].sram_channels;
 
 	msk_stat = cx_read(sram_ch->int_mstat);
 	vid_status = cx_read(sram_ch->int_stat);
@@ -800,14 +811,15 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
 	}
 
 	dev->_channel_upstream_select = channel_select;
-	sram_ch = &dev->sram_channels[channel_select];
+       sram_ch = dev->channels[channel_select].sram_channels;
 
 	INIT_WORK(&dev->_irq_work_entry, cx25821_vidups_handler);
 	dev->_irq_queues = create_singlethread_workqueue("cx25821_workqueue");
 
 	if (!dev->_irq_queues) {
 		printk
-		    (KERN_ERR "cx25821: create_singlethread_workqueue() for Video FAILED!\n");
+		   (KERN_ERR "cx25821: create_singlethread_workqueue() for \
+		   Video FAILED!\n");
 		return -ENOMEM;
 	}
 	/* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.h b/drivers/staging/cx25821/cx25821-video-upstream.h
index cc9f9384251..10dee5c24a8 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream.h
+++ b/drivers/staging/cx25821/cx25821-video-upstream.h
@@ -38,7 +38,7 @@
 #define RESET_STATUS          -1
 #define NUM_NO_OPS            5
 
-// PAL and NTSC line sizes and number of lines.
+/* PAL and NTSC line sizes and number of lines. */
 #define WIDTH_D1              720
 #define NTSC_LINES_PER_FRAME  480
 #define PAL_LINES_PER_FRAME   576
diff --git a/drivers/staging/cx25821/cx25821-video.c b/drivers/staging/cx25821/cx25821-video.c
index 791212c1a66..1d5e8796d38 100644
--- a/drivers/staging/cx25821/cx25821-video.c
+++ b/drivers/staging/cx25821/cx25821-video.c
@@ -4,6 +4,9 @@
  *  Copyright (C) 2009 Conexant Systems Inc.
  *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
  *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
+ *  Parts adapted/taken from Eduardo Moscoso Rubino
+ *  Copyright (C) 2009 Eduardo Moscoso Rubino <moscoso@TopoLogica.com>
+ *
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -24,7 +27,7 @@
 #include "cx25821-video.h"
 
 MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
+MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
 MODULE_LICENSE("GPL");
 
 static unsigned int video_nr[] = {[0 ... (CX25821_MAXBOARDS - 1)] = UNSET };
@@ -48,7 +51,10 @@ unsigned int vid_limit = 16;
 module_param(vid_limit, int, 0644);
 MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
 
-static void init_controls(struct cx25821_dev *dev, int chan_num);
+static void cx25821_init_controls(struct cx25821_dev *dev, int chan_num);
+
+static const struct v4l2_file_operations video_fops;
+static const struct v4l2_ioctl_ops video_ioctl_ops;
 
 #define FORMAT_FLAGS_PACKED       0x01
 
@@ -211,7 +217,7 @@ static int cx25821_ctrl_query(struct v4l2_queryctrl *qctrl)
 }
 */
 
-// resource management
+/* resource management */
 int cx25821_res_get(struct cx25821_dev *dev, struct cx25821_fh *fh, unsigned int bit)
 {
 	dprintk(1, "%s()\n", __func__);
@@ -221,14 +227,14 @@ int cx25821_res_get(struct cx25821_dev *dev, struct cx25821_fh *fh, unsigned int
 
 	/* is it free? */
 	mutex_lock(&dev->lock);
-	if (dev->resources & bit) {
+       if (dev->channels[fh->channel_id].resources & bit) {
 		/* no, someone else uses it */
 		mutex_unlock(&dev->lock);
 		return 0;
 	}
 	/* it's free, grab it */
 	fh->resources |= bit;
-	dev->resources |= bit;
+       dev->channels[fh->channel_id].resources |= bit;
 	dprintk(1, "res: get %d\n", bit);
 	mutex_unlock(&dev->lock);
 	return 1;
@@ -239,9 +245,9 @@ int cx25821_res_check(struct cx25821_fh *fh, unsigned int bit)
 	return fh->resources & bit;
 }
 
-int cx25821_res_locked(struct cx25821_dev *dev, unsigned int bit)
+int cx25821_res_locked(struct cx25821_fh *fh, unsigned int bit)
 {
-	return dev->resources & bit;
+       return fh->dev->channels[fh->channel_id].resources & bit;
 }
 
 void cx25821_res_free(struct cx25821_dev *dev, struct cx25821_fh *fh, unsigned int bits)
@@ -251,7 +257,7 @@ void cx25821_res_free(struct cx25821_dev *dev, struct cx25821_fh *fh, unsigned i
 
 	mutex_lock(&dev->lock);
 	fh->resources &= ~bits;
-	dev->resources &= ~bits;
+       dev->channels[fh->channel_id].resources &= ~bits;
 	dprintk(1, "res: put %d\n", bits);
 	mutex_unlock(&dev->lock);
 }
@@ -358,11 +364,11 @@ void cx25821_vid_timeout(unsigned long data)
 	struct cx25821_data *timeout_data = (struct cx25821_data *)data;
 	struct cx25821_dev *dev = timeout_data->dev;
 	struct sram_channel *channel = timeout_data->channel;
-	struct cx25821_dmaqueue *q = &dev->vidq[channel->i];
+       struct cx25821_dmaqueue *q = &dev->channels[channel->i].vidq;
 	struct cx25821_buffer *buf;
 	unsigned long flags;
 
-	//cx25821_sram_channel_dump(dev, channel);
+       /* cx25821_sram_channel_dump(dev, channel); */
 	cx_clear(channel->dma_ctl, 0x11);
 
 	spin_lock_irqsave(&dev->slock, flags);
@@ -384,7 +390,7 @@ int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status)
 	u32 count = 0;
 	int handled = 0;
 	u32 mask;
-	struct sram_channel *channel = &dev->sram_channels[chan_num];
+       struct sram_channel *channel = dev->channels[chan_num].sram_channels;
 
 	mask = cx_read(channel->int_msk);
 	if (0 == (status & mask))
@@ -404,7 +410,8 @@ int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status)
 	if (status & FLD_VID_DST_RISC1) {
 		spin_lock(&dev->slock);
 		count = cx_read(channel->gpcnt);
-		cx25821_video_wakeup(dev, &dev->vidq[channel->i], count);
+	       cx25821_video_wakeup(dev,
+		       &dev->channels[channel->i].vidq, count);
 		spin_unlock(&dev->slock);
 		handled++;
 	}
@@ -413,8 +420,9 @@ int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status)
 	if (status & 0x10) {
 		dprintk(2, "stopper video\n");
 		spin_lock(&dev->slock);
-		cx25821_restart_video_queue(dev, &dev->vidq[channel->i],
-					    channel);
+	       cx25821_restart_video_queue(dev,
+			       &dev->channels[channel->i].vidq,
+				       channel);
 		spin_unlock(&dev->slock);
 		handled++;
 	}
@@ -437,72 +445,95 @@ void cx25821_video_unregister(struct cx25821_dev *dev, int chan_num)
 {
 	cx_clear(PCI_INT_MSK, 1);
 
-	if (dev->video_dev[chan_num]) {
-		if (video_is_registered(dev->video_dev[chan_num]))
-			video_unregister_device(dev->video_dev[chan_num]);
+       if (dev->channels[chan_num].video_dev) {
+	       if (video_is_registered(dev->channels[chan_num].video_dev))
+		       video_unregister_device(
+			       dev->channels[chan_num].video_dev);
 		else
-			video_device_release(dev->video_dev[chan_num]);
+		       video_device_release(
+			       dev->channels[chan_num].video_dev);
 
-		dev->video_dev[chan_num] = NULL;
+	       dev->channels[chan_num].video_dev = NULL;
 
-		btcx_riscmem_free(dev->pci, &dev->vidq[chan_num].stopper);
+	       btcx_riscmem_free(dev->pci,
+		       &dev->channels[chan_num].vidq.stopper);
 
 		printk(KERN_WARNING "device %d released!\n", chan_num);
 	}
 
 }
 
-int cx25821_video_register(struct cx25821_dev *dev, int chan_num,
-			   struct video_device *video_template)
+int cx25821_video_register(struct cx25821_dev *dev)
 {
 	int err;
+       int i;
+
+       struct video_device cx25821_video_device = {
+	       .name = "cx25821-video",
+	       .fops = &video_fops,
+	       .minor = -1,
+	       .ioctl_ops = &video_ioctl_ops,
+	       .tvnorms = CX25821_NORMS,
+	       .current_norm = V4L2_STD_NTSC_M,
+       };
 
 	spin_lock_init(&dev->slock);
 
-	//printk(KERN_WARNING "Channel %d\n", chan_num);
+    for (i = 0; i < MAX_VID_CHANNEL_NUM - 1; ++i) {
+	       cx25821_init_controls(dev, i);
 
-#ifdef TUNER_FLAG
-	dev->tvnorm = video_template->current_norm;
-#endif
+	       cx25821_risc_stopper(dev->pci,
+			       &dev->channels[i].vidq.stopper,
+			       dev->channels[i].sram_channels->dma_ctl,
+			       0x11, 0);
+
+	       dev->channels[i].sram_channels = &cx25821_sram_channels[i];
+	       dev->channels[i].video_dev = NULL;
+	       dev->channels[i].resources = 0;
+
+	       cx_write(dev->channels[i].sram_channels->int_stat,
+			       0xffffffff);
+
+	       INIT_LIST_HEAD(&dev->channels[i].vidq.active);
+	       INIT_LIST_HEAD(&dev->channels[i].vidq.queued);
+
+	       dev->channels[i].timeout_data.dev = dev;
+	       dev->channels[i].timeout_data.channel =
+				       &cx25821_sram_channels[i];
+	       dev->channels[i].vidq.timeout.function =
+				       cx25821_vid_timeout;
+	       dev->channels[i].vidq.timeout.data =
+		       (unsigned long)&dev->channels[i].timeout_data;
+	       init_timer(&dev->channels[i].vidq.timeout);
+
+	       /* register v4l devices */
+	       dev->channels[i].video_dev = cx25821_vdev_init(dev,
+		       dev->pci, &cx25821_video_device, "video");
+
+	       err = video_register_device(dev->channels[i].video_dev,
+			       VFL_TYPE_GRABBER, video_nr[dev->nr]);
+
+	       if (err < 0)
+		       goto fail_unreg;
 
-	/* init video dma queues */
-	dev->timeout_data[chan_num].dev = dev;
-	dev->timeout_data[chan_num].channel = &dev->sram_channels[chan_num];
-	INIT_LIST_HEAD(&dev->vidq[chan_num].active);
-	INIT_LIST_HEAD(&dev->vidq[chan_num].queued);
-	dev->vidq[chan_num].timeout.function = cx25821_vid_timeout;
-	dev->vidq[chan_num].timeout.data =
-	    (unsigned long)&dev->timeout_data[chan_num];
-	init_timer(&dev->vidq[chan_num].timeout);
-	cx25821_risc_stopper(dev->pci, &dev->vidq[chan_num].stopper,
-			     dev->sram_channels[chan_num].dma_ctl, 0x11, 0);
-
-	/* register v4l devices */
-	dev->video_dev[chan_num] =
-	    cx25821_vdev_init(dev, dev->pci, video_template, "video");
-	err =
-	    video_register_device(dev->video_dev[chan_num], VFL_TYPE_GRABBER,
-				  video_nr[dev->nr]);
-
-	if (err < 0) {
-		goto fail_unreg;
 	}
-	//set PCI interrupt
+
+    /* set PCI interrupt */
 	cx_set(PCI_INT_MSK, 0xff);
 
 	/* initial device configuration */
 	mutex_lock(&dev->lock);
 #ifdef TUNER_FLAG
+       dev->tvnorm = cx25821_video_device.current_norm;
 	cx25821_set_tvnorm(dev, dev->tvnorm);
 #endif
 	mutex_unlock(&dev->lock);
 
-	init_controls(dev, chan_num);
 
-	return 0;
+    return 0;
 
-      fail_unreg:
-	cx25821_video_unregister(dev, chan_num);
+fail_unreg:
+       cx25821_video_unregister(dev, i);
 	return err;
 }
 
@@ -533,7 +564,7 @@ int cx25821_buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	u32 line0_offset, line1_offset;
 	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
 	int bpl_local = LINE_SIZE_D1;
-	int channel_opened = 0;
+       int channel_opened = fh->channel_id;
 
 	BUG_ON(NULL == fh->fmt);
 	if (fh->width < 48 || fh->width > 720 ||
@@ -572,26 +603,29 @@ int cx25821_buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		channel_opened = (channel_opened < 0
 				  || channel_opened > 7) ? 7 : channel_opened;
 
-		if (dev->pixel_formats[channel_opened] == PIXEL_FRMT_411)
+	       if (dev->channels[channel_opened]
+		       .pixel_formats == PIXEL_FRMT_411)
 			buf->bpl = (buf->fmt->depth * buf->vb.width) >> 3;
 		else
 			buf->bpl = (buf->fmt->depth >> 3) * (buf->vb.width);
 
-		if (dev->pixel_formats[channel_opened] == PIXEL_FRMT_411) {
+	       if (dev->channels[channel_opened]
+		       .pixel_formats == PIXEL_FRMT_411) {
 			bpl_local = buf->bpl;
 		} else {
-			bpl_local = buf->bpl;	//Default
+		       bpl_local = buf->bpl;   /* Default */
 
 			if (channel_opened >= 0 && channel_opened <= 7) {
-				if (dev->use_cif_resolution[channel_opened]) {
+			       if (dev->channels[channel_opened]
+					       .use_cif_resolution) {
 					if (dev->tvnorm & V4L2_STD_PAL_BG
 					    || dev->tvnorm & V4L2_STD_PAL_DK)
 						bpl_local = 352 << 1;
 					else
 						bpl_local =
-						    dev->
-						    cif_width[channel_opened] <<
-						    1;
+						 dev->channels[channel_opened].
+						 cif_width <<
+						 1;
 				}
 			}
 		}
@@ -685,6 +719,383 @@ int cx25821_video_mmap(struct file *file, struct vm_area_struct *vma)
 	return videobuf_mmap_mapper(get_queue(fh), vma);
 }
 
+
+static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+       struct cx25821_buffer *buf =
+	   container_of(vb, struct cx25821_buffer, vb);
+       struct cx25821_buffer *prev;
+       struct cx25821_fh *fh = vq->priv_data;
+       struct cx25821_dev *dev = fh->dev;
+       struct cx25821_dmaqueue *q = &dev->channels[fh->channel_id].vidq;
+
+       /* add jump to stopper */
+       buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+       buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
+       buf->risc.jmp[2] = cpu_to_le32(0);      /* bits 63-32 */
+
+       dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
+
+       if (!list_empty(&q->queued)) {
+	       list_add_tail(&buf->vb.queue, &q->queued);
+	       buf->vb.state = VIDEOBUF_QUEUED;
+	       dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
+		       buf->vb.i);
+
+       } else if (list_empty(&q->active)) {
+	       list_add_tail(&buf->vb.queue, &q->active);
+	       cx25821_start_video_dma(dev, q, buf,
+				       dev->channels[fh->channel_id].
+				       sram_channels);
+	       buf->vb.state = VIDEOBUF_ACTIVE;
+	       buf->count = q->count++;
+	       mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+	       dprintk(2,
+		       "[%p/%d] buffer_queue - first active, buf cnt = %d, \
+		       q->count = %d\n",
+		       buf, buf->vb.i, buf->count, q->count);
+       } else {
+	       prev =
+		   list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
+	       if (prev->vb.width == buf->vb.width
+		   && prev->vb.height == buf->vb.height
+		   && prev->fmt == buf->fmt) {
+		       list_add_tail(&buf->vb.queue, &q->active);
+		       buf->vb.state = VIDEOBUF_ACTIVE;
+		       buf->count = q->count++;
+		       prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+
+		       /* 64 bit bits 63-32 */
+		       prev->risc.jmp[2] = cpu_to_le32(0);
+		       dprintk(2,
+			       "[%p/%d] buffer_queue - append to active, \
+			       buf->count=%d\n",
+			       buf, buf->vb.i, buf->count);
+
+	       } else {
+		       list_add_tail(&buf->vb.queue, &q->queued);
+		       buf->vb.state = VIDEOBUF_QUEUED;
+		       dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
+			       buf->vb.i);
+	       }
+       }
+
+       if (list_empty(&q->active))
+	       dprintk(2, "active queue empty!\n");
+}
+
+static struct videobuf_queue_ops cx25821_video_qops = {
+       .buf_setup = cx25821_buffer_setup,
+       .buf_prepare = cx25821_buffer_prepare,
+       .buf_queue = buffer_queue,
+       .buf_release = cx25821_buffer_release,
+};
+
+static int video_open(struct file *file)
+{
+       struct video_device *vdev = video_devdata(file);
+       struct cx25821_dev *h, *dev = video_drvdata(file);
+       struct cx25821_fh *fh;
+       struct list_head *list;
+       int minor = video_devdata(file)->minor;
+       enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+       u32 pix_format;
+       int ch_id = 0;
+       int i;
+
+       dprintk(1, "open dev=%s type=%s\n",
+		       video_device_node_name(vdev),
+		       v4l2_type_names[type]);
+
+       /* allocate + initialize per filehandle data */
+       fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+       if (NULL == fh)
+	       return -ENOMEM;
+
+       lock_kernel();
+
+       list_for_each(list, &cx25821_devlist)
+       {
+	       h = list_entry(list, struct cx25821_dev, devlist);
+
+	       for (i = 0; i < MAX_VID_CHANNEL_NUM; i++) {
+		       if (h->channels[i].video_dev &&
+			   h->channels[i].video_dev->minor == minor) {
+			       dev = h;
+			       ch_id = i;
+			       type  = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		       }
+	       }
+       }
+
+       if (NULL == dev) {
+	       unlock_kernel();
+	       return -ENODEV;
+       }
+
+       file->private_data = fh;
+       fh->dev = dev;
+       fh->type = type;
+       fh->width = 720;
+    fh->channel_id = ch_id;
+
+       if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
+	       fh->height = 576;
+       else
+	       fh->height = 480;
+
+       dev->channel_opened = fh->channel_id;
+       pix_format =
+	   (dev->channels[ch_id].pixel_formats ==
+	    PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
+       fh->fmt = format_by_fourcc(pix_format);
+
+       v4l2_prio_open(&dev->channels[ch_id].prio, &fh->prio);
+
+       videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
+			      &dev->pci->dev, &dev->slock,
+			      V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			      V4L2_FIELD_INTERLACED,
+			      sizeof(struct cx25821_buffer), fh);
+
+       dprintk(1, "post videobuf_queue_init()\n");
+       unlock_kernel();
+
+       return 0;
+}
+
+static ssize_t video_read(struct file *file, char __user * data, size_t count,
+			 loff_t *ppos)
+{
+       struct cx25821_fh *fh = file->private_data;
+
+       switch (fh->type) {
+       case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+	       if (cx25821_res_locked(fh, RESOURCE_VIDEO0))
+		       return -EBUSY;
+
+	       return videobuf_read_one(&fh->vidq, data, count, ppos,
+					file->f_flags & O_NONBLOCK);
+
+       default:
+	       BUG();
+	       return 0;
+       }
+}
+
+static unsigned int video_poll(struct file *file,
+			      struct poll_table_struct *wait)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_buffer *buf;
+
+       if (cx25821_res_check(fh, RESOURCE_VIDEO0)) {
+	       /* streaming capture */
+	       if (list_empty(&fh->vidq.stream))
+		       return POLLERR;
+	       buf = list_entry(fh->vidq.stream.next,
+				struct cx25821_buffer, vb.stream);
+       } else {
+	       /* read() capture */
+	       buf = (struct cx25821_buffer *)fh->vidq.read_buf;
+	       if (NULL == buf)
+		       return POLLERR;
+       }
+
+       poll_wait(file, &buf->vb.done, wait);
+       if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
+	       if (buf->vb.state == VIDEOBUF_DONE) {
+		       struct cx25821_dev *dev = fh->dev;
+
+		       if (dev && dev->channels[fh->channel_id]
+					       .use_cif_resolution) {
+			       u8 cam_id = *((char *)buf->vb.baddr + 3);
+			       memcpy((char *)buf->vb.baddr,
+				      (char *)buf->vb.baddr + (fh->width * 2),
+				      (fh->width * 2));
+			       *((char *)buf->vb.baddr + 3) = cam_id;
+		       }
+	       }
+
+	       return POLLIN | POLLRDNORM;
+       }
+
+       return 0;
+}
+
+static int video_release(struct file *file)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_dev *dev = fh->dev;
+
+       /* stop the risc engine and fifo */
+       cx_write(channel0->dma_ctl, 0); /* FIFO and RISC disable */
+
+       /* stop video capture */
+       if (cx25821_res_check(fh, RESOURCE_VIDEO0)) {
+	       videobuf_queue_cancel(&fh->vidq);
+	       cx25821_res_free(dev, fh, RESOURCE_VIDEO0);
+       }
+
+       if (fh->vidq.read_buf) {
+	       cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
+	       kfree(fh->vidq.read_buf);
+       }
+
+       videobuf_mmap_free(&fh->vidq);
+
+       v4l2_prio_close(&dev->channels[fh->channel_id].prio, fh->prio);
+       file->private_data = NULL;
+       kfree(fh);
+
+       return 0;
+}
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+       struct cx25821_fh *fh = priv;
+       struct cx25821_dev *dev = fh->dev;
+
+       if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE))
+	       return -EINVAL;
+
+       if (unlikely(i != fh->type))
+	       return -EINVAL;
+
+       if (unlikely(!cx25821_res_get(dev, fh,
+		       cx25821_get_resource(fh, RESOURCE_VIDEO0))))
+	       return -EBUSY;
+
+       return videobuf_streamon(get_queue(fh));
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+       struct cx25821_fh *fh = priv;
+       struct cx25821_dev *dev = fh->dev;
+       int err, res;
+
+       if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	       return -EINVAL;
+       if (i != fh->type)
+	       return -EINVAL;
+
+       res = cx25821_get_resource(fh, RESOURCE_VIDEO0);
+       err = videobuf_streamoff(get_queue(fh));
+       if (err < 0)
+	       return err;
+       cx25821_res_free(dev, fh, res);
+       return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+			       struct v4l2_format *f)
+{
+       struct cx25821_fh *fh = priv;
+       struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
+       int err;
+       int pix_format = PIXEL_FRMT_422;
+
+       if (fh) {
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
+	       if (0 != err)
+		       return err;
+       }
+
+       dprintk(2, "%s()\n", __func__);
+       err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
+
+       if (0 != err)
+	       return err;
+
+       fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+       fh->vidq.field = f->fmt.pix.field;
+
+       /* check if width and height is valid based on set standard */
+       if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm))
+	       fh->width = f->fmt.pix.width;
+
+       if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm))
+	       fh->height = f->fmt.pix.height;
+
+       if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
+	       pix_format = PIXEL_FRMT_411;
+       else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
+	       pix_format = PIXEL_FRMT_422;
+       else
+	       return -EINVAL;
+
+       cx25821_set_pixel_format(dev, SRAM_CH00, pix_format);
+
+       /* check if cif resolution */
+       if (fh->width == 320 || fh->width == 352)
+	       dev->channels[fh->channel_id].use_cif_resolution = 1;
+       else
+	       dev->channels[fh->channel_id].use_cif_resolution = 0;
+
+       dev->channels[fh->channel_id].cif_width = fh->width;
+       medusa_set_resolution(dev, fh->width, SRAM_CH00);
+
+       dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
+	       fh->height, fh->vidq.field);
+       cx25821_call_all(dev, video, s_fmt, f);
+
+       return 0;
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+       int ret_val = 0;
+       struct cx25821_fh *fh = priv;
+       struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
+
+       ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
+
+    p->sequence = dev->channels[fh->channel_id].vidq.count;
+
+       return ret_val;
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+       struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
+       struct cx25821_fh *fh = priv;
+       char name[32 + 2];
+
+       struct sram_channel *sram_ch = dev->channels[fh->channel_id]
+						       .sram_channels;
+       u32 tmp = 0;
+
+       snprintf(name, sizeof(name), "%s/2", dev->name);
+       printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
+	      dev->name);
+       cx25821_call_all(dev, core, log_status);
+       tmp = cx_read(sram_ch->dma_ctl);
+       printk(KERN_INFO "Video input 0 is %s\n",
+	      (tmp & 0x11) ? "streaming" : "stopped");
+       printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
+	      dev->name);
+       return 0;
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+			struct v4l2_control *ctl)
+{
+       struct cx25821_fh *fh = priv;
+       struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
+       int err;
+
+       if (fh) {
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
+	       if (0 != err)
+		       return err;
+       }
+
+       return cx25821_set_control(dev, ctl, fh->channel_id);
+}
+
 /* VIDEO IOCTLS                                                       */
 int cx25821_vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f)
 {
@@ -822,8 +1233,9 @@ int cx25821_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 int cx25821_vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p)
 {
 	struct cx25821_dev *dev = ((struct cx25821_fh *)f)->dev;
+       struct cx25821_fh *fh = f;
 
-	*p = v4l2_prio_max(&dev->prio);
+       *p = v4l2_prio_max(&dev->channels[fh->channel_id].prio);
 
 	return 0;
 }
@@ -833,7 +1245,8 @@ int cx25821_vidioc_s_priority(struct file *file, void *f, enum v4l2_priority pri
 	struct cx25821_fh *fh = f;
 	struct cx25821_dev *dev = ((struct cx25821_fh *)f)->dev;
 
-	return v4l2_prio_change(&dev->prio, &fh->prio, prio);
+       return v4l2_prio_change(&dev->channels[fh->channel_id]
+				       .prio, &fh->prio, prio);
 }
 
 #ifdef TUNER_FLAG
@@ -846,7 +1259,8 @@ int cx25821_vidioc_s_std(struct file *file, void *priv, v4l2_std_id * tvnorms)
 	dprintk(1, "%s()\n", __func__);
 
 	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
 		if (0 != err)
 			return err;
 	}
@@ -916,7 +1330,8 @@ int cx25821_vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	dprintk(1, "%s(%d)\n", __func__, i);
 
 	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
 		if (0 != err)
 			return err;
 	}
@@ -967,9 +1382,14 @@ int cx25821_vidioc_s_frequency(struct file *file, void *priv, struct v4l2_freque
 	int err;
 
 	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
+	       dev = fh->dev;
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
 		if (0 != err)
 			return err;
+       } else {
+	       printk(KERN_ERR "Invalid fh pointer!\n");
+	       return -EINVAL;
 	}
 
 	return cx25821_set_freq(dev, f);
@@ -1031,7 +1451,8 @@ int cx25821_vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
 	int err;
 
 	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id]
+					       .prio, fh->prio);
 		if (0 != err)
 			return err;
 	}
@@ -1046,7 +1467,7 @@ int cx25821_vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
 }
 
 #endif
-// ******************************************************************************************
+/*****************************************************************************/
 static const struct v4l2_queryctrl no_ctl = {
 	.name = "42",
 	.flags = V4L2_CTRL_FLAG_DISABLED,
@@ -1129,6 +1550,7 @@ static const struct v4l2_queryctrl *ctrl_by_id(unsigned int id)
 int cx25821_vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctl)
 {
 	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
+       struct cx25821_fh *fh = priv;
 
 	const struct v4l2_queryctrl *ctrl;
 
@@ -1138,16 +1560,16 @@ int cx25821_vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ct
 		return -EINVAL;
 	switch (ctl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		ctl->value = dev->ctl_bright;
+	       ctl->value = dev->channels[fh->channel_id].ctl_bright;
 		break;
 	case V4L2_CID_HUE:
-		ctl->value = dev->ctl_hue;
+	       ctl->value = dev->channels[fh->channel_id].ctl_hue;
 		break;
 	case V4L2_CID_CONTRAST:
-		ctl->value = dev->ctl_contrast;
+	       ctl->value = dev->channels[fh->channel_id].ctl_contrast;
 		break;
 	case V4L2_CID_SATURATION:
-		ctl->value = dev->ctl_saturation;
+	       ctl->value = dev->channels[fh->channel_id].ctl_saturation;
 		break;
 	}
 	return 0;
@@ -1181,19 +1603,19 @@ int cx25821_set_control(struct cx25821_dev *dev,
 
 	switch (ctl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		dev->ctl_bright = ctl->value;
+	       dev->channels[chan_num].ctl_bright = ctl->value;
 		medusa_set_brightness(dev, ctl->value, chan_num);
 		break;
 	case V4L2_CID_HUE:
-		dev->ctl_hue = ctl->value;
+	       dev->channels[chan_num].ctl_hue = ctl->value;
 		medusa_set_hue(dev, ctl->value, chan_num);
 		break;
 	case V4L2_CID_CONTRAST:
-		dev->ctl_contrast = ctl->value;
+	       dev->channels[chan_num].ctl_contrast = ctl->value;
 		medusa_set_contrast(dev, ctl->value, chan_num);
 		break;
 	case V4L2_CID_SATURATION:
-		dev->ctl_saturation = ctl->value;
+	       dev->channels[chan_num].ctl_saturation = ctl->value;
 		medusa_set_saturation(dev, ctl->value, chan_num);
 		break;
 	}
@@ -1203,7 +1625,7 @@ int cx25821_set_control(struct cx25821_dev *dev,
 	return err;
 }
 
-static void init_controls(struct cx25821_dev *dev, int chan_num)
+static void cx25821_init_controls(struct cx25821_dev *dev, int chan_num)
 {
 	struct v4l2_control ctrl;
 	int i;
@@ -1239,23 +1661,24 @@ int cx25821_vidioc_s_crop(struct file *file, void *priv, struct v4l2_crop *crop)
 	int err;
 
 	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
+	       err = v4l2_prio_check(&dev->channels[fh->channel_id].
+					       prio, fh->prio);
 		if (0 != err)
 			return err;
 	}
-	// cx25821_vidioc_s_crop not supported
+       /* cx25821_vidioc_s_crop not supported */
 	return -EINVAL;
 }
 
 int cx25821_vidioc_g_crop(struct file *file, void *priv, struct v4l2_crop *crop)
 {
-	// cx25821_vidioc_g_crop not supported
+       /* cx25821_vidioc_g_crop not supported */
 	return -EINVAL;
 }
 
 int cx25821_vidioc_querystd(struct file *file, void *priv, v4l2_std_id * norm)
 {
-	// medusa does not support video standard sensing of current input
+       /* medusa does not support video standard sensing of current input */
 	*norm = CX25821_NORMS;
 
 	return 0;
@@ -1297,3 +1720,325 @@ int cx25821_is_valid_height(u32 height, v4l2_std_id tvnorm)
 
 	return 0;
 }
+
+static long video_ioctl_upstream9(struct file *file, unsigned int cmd,
+				 unsigned long arg)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_dev *dev = fh->dev;
+       int command = 0;
+       struct upstream_user_struct *data_from_user;
+
+       data_from_user = (struct upstream_user_struct *)arg;
+
+       if (!data_from_user) {
+	       printk
+		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
+		    __func__);
+	       return 0;
+       }
+
+       command = data_from_user->command;
+
+       if (command != UPSTREAM_START_VIDEO &&
+	       command != UPSTREAM_STOP_VIDEO)
+	       return 0;
+
+       dev->input_filename = data_from_user->input_filename;
+       dev->input_audiofilename = data_from_user->input_filename;
+       dev->vid_stdname = data_from_user->vid_stdname;
+       dev->pixel_format = data_from_user->pixel_format;
+       dev->channel_select = data_from_user->channel_select;
+       dev->command = data_from_user->command;
+
+       switch (command) {
+       case UPSTREAM_START_VIDEO:
+	       cx25821_start_upstream_video_ch1(dev, data_from_user);
+	       break;
+
+       case UPSTREAM_STOP_VIDEO:
+	       cx25821_stop_upstream_video_ch1(dev);
+	       break;
+       }
+
+       return 0;
+}
+
+static long video_ioctl_upstream10(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_dev *dev = fh->dev;
+       int command = 0;
+       struct upstream_user_struct *data_from_user;
+
+       data_from_user = (struct upstream_user_struct *)arg;
+
+       if (!data_from_user) {
+	       printk
+		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
+		    __func__);
+	       return 0;
+       }
+
+       command = data_from_user->command;
+
+       if (command != UPSTREAM_START_VIDEO &&
+	       command != UPSTREAM_STOP_VIDEO)
+	       return 0;
+
+       dev->input_filename_ch2 = data_from_user->input_filename;
+       dev->input_audiofilename = data_from_user->input_filename;
+       dev->vid_stdname_ch2 = data_from_user->vid_stdname;
+       dev->pixel_format_ch2 = data_from_user->pixel_format;
+       dev->channel_select_ch2 = data_from_user->channel_select;
+       dev->command_ch2 = data_from_user->command;
+
+       switch (command) {
+       case UPSTREAM_START_VIDEO:
+	       cx25821_start_upstream_video_ch2(dev, data_from_user);
+	       break;
+
+       case UPSTREAM_STOP_VIDEO:
+	       cx25821_stop_upstream_video_ch2(dev);
+	       break;
+       }
+
+       return 0;
+}
+
+static long video_ioctl_upstream11(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_dev *dev = fh->dev;
+       int command = 0;
+       struct upstream_user_struct *data_from_user;
+
+       data_from_user = (struct upstream_user_struct *)arg;
+
+       if (!data_from_user) {
+	       printk
+		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
+		    __func__);
+	       return 0;
+       }
+
+       command = data_from_user->command;
+
+       if (command != UPSTREAM_START_AUDIO &&
+	       command != UPSTREAM_STOP_AUDIO)
+	       return 0;
+
+       dev->input_filename = data_from_user->input_filename;
+       dev->input_audiofilename = data_from_user->input_filename;
+       dev->vid_stdname = data_from_user->vid_stdname;
+       dev->pixel_format = data_from_user->pixel_format;
+       dev->channel_select = data_from_user->channel_select;
+       dev->command = data_from_user->command;
+
+       switch (command) {
+       case UPSTREAM_START_AUDIO:
+	       cx25821_start_upstream_audio(dev, data_from_user);
+	       break;
+
+       case UPSTREAM_STOP_AUDIO:
+	       cx25821_stop_upstream_audio(dev);
+	       break;
+       }
+
+       return 0;
+}
+
+static long video_ioctl_set(struct file *file, unsigned int cmd,
+			   unsigned long arg)
+{
+       struct cx25821_fh *fh = file->private_data;
+       struct cx25821_dev *dev = fh->dev;
+       struct downstream_user_struct *data_from_user;
+       int command;
+       int width = 720;
+       int selected_channel = 0, pix_format = 0, i = 0;
+       int cif_enable = 0, cif_width = 0;
+       u32 value = 0;
+
+       data_from_user = (struct downstream_user_struct *)arg;
+
+       if (!data_from_user) {
+	       printk(
+	       "cx25821 in %s(): User data is INVALID. Returning.\n",
+	       __func__);
+	       return 0;
+       }
+
+       command = data_from_user->command;
+
+       if (command != SET_VIDEO_STD && command != SET_PIXEL_FORMAT
+	   && command != ENABLE_CIF_RESOLUTION && command != REG_READ
+	   && command != REG_WRITE && command != MEDUSA_READ
+	   && command != MEDUSA_WRITE) {
+	       return 0;
+       }
+
+       switch (command) {
+       case SET_VIDEO_STD:
+	       dev->tvnorm =
+		   !strcmp(data_from_user->vid_stdname,
+			   "PAL") ? V4L2_STD_PAL_BG : V4L2_STD_NTSC_M;
+	       medusa_set_videostandard(dev);
+	       break;
+
+       case SET_PIXEL_FORMAT:
+	       selected_channel = data_from_user->decoder_select;
+	       pix_format = data_from_user->pixel_format;
+
+	       if (!(selected_channel <= 7 && selected_channel >= 0)) {
+		       selected_channel -= 4;
+		       selected_channel = selected_channel % 8;
+	       }
+
+	       if (selected_channel >= 0)
+		       cx25821_set_pixel_format(dev, selected_channel,
+						pix_format);
+
+	       break;
+
+       case ENABLE_CIF_RESOLUTION:
+	       selected_channel = data_from_user->decoder_select;
+	       cif_enable = data_from_user->cif_resolution_enable;
+	       cif_width = data_from_user->cif_width;
+
+	       if (cif_enable) {
+		       if (dev->tvnorm & V4L2_STD_PAL_BG
+			   || dev->tvnorm & V4L2_STD_PAL_DK)
+			       width = 352;
+		       else
+			       width = (cif_width == 320
+					|| cif_width == 352) ? cif_width : 320;
+	       }
+
+	       if (!(selected_channel <= 7 && selected_channel >= 0)) {
+		       selected_channel -= 4;
+		       selected_channel = selected_channel % 8;
+	       }
+
+	       if (selected_channel <= 7 && selected_channel >= 0) {
+		       dev->channels[selected_channel].
+			       use_cif_resolution = cif_enable;
+		       dev->channels[selected_channel].cif_width = width;
+	       } else {
+		       for (i = 0; i < VID_CHANNEL_NUM; i++) {
+			       dev->channels[i].use_cif_resolution =
+				       cif_enable;
+			       dev->channels[i].cif_width = width;
+		       }
+	       }
+
+	       medusa_set_resolution(dev, width, selected_channel);
+	       break;
+       case REG_READ:
+	       data_from_user->reg_data = cx_read(data_from_user->reg_address);
+	       break;
+       case REG_WRITE:
+	       cx_write(data_from_user->reg_address, data_from_user->reg_data);
+	       break;
+       case MEDUSA_READ:
+	       value =
+		   cx25821_i2c_read(&dev->i2c_bus[0],
+				    (u16) data_from_user->reg_address,
+				    &data_from_user->reg_data);
+	       break;
+       case MEDUSA_WRITE:
+	       cx25821_i2c_write(&dev->i2c_bus[0],
+				 (u16) data_from_user->reg_address,
+				 data_from_user->reg_data);
+	       break;
+       }
+
+       return 0;
+}
+
+static long cx25821_video_ioctl(struct file *file,
+			       unsigned int cmd, unsigned long arg)
+{
+       int  ret = 0;
+
+       struct cx25821_fh  *fh  = file->private_data;
+
+       /* check to see if it's the video upstream */
+       if (fh->channel_id == SRAM_CH09) {
+	       ret = video_ioctl_upstream9(file, cmd, arg);
+	       return ret;
+       } else if (fh->channel_id == SRAM_CH10) {
+	       ret = video_ioctl_upstream10(file, cmd, arg);
+	       return ret;
+       } else if (fh->channel_id == SRAM_CH11) {
+	       ret = video_ioctl_upstream11(file, cmd, arg);
+	       ret = video_ioctl_set(file, cmd, arg);
+	       return ret;
+       }
+
+    return video_ioctl2(file, cmd, arg);
+}
+
+/* exported stuff */
+static const struct v4l2_file_operations video_fops = {
+       .owner = THIS_MODULE,
+       .open = video_open,
+       .release = video_release,
+       .read = video_read,
+       .poll = video_poll,
+       .mmap = cx25821_video_mmap,
+       .ioctl = cx25821_video_ioctl,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+       .vidioc_querycap = cx25821_vidioc_querycap,
+       .vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
+       .vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
+       .vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
+       .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+       .vidioc_reqbufs = cx25821_vidioc_reqbufs,
+       .vidioc_querybuf = cx25821_vidioc_querybuf,
+       .vidioc_qbuf = cx25821_vidioc_qbuf,
+       .vidioc_dqbuf = vidioc_dqbuf,
+#ifdef TUNER_FLAG
+       .vidioc_s_std = cx25821_vidioc_s_std,
+       .vidioc_querystd = cx25821_vidioc_querystd,
+#endif
+       .vidioc_cropcap = cx25821_vidioc_cropcap,
+       .vidioc_s_crop = cx25821_vidioc_s_crop,
+       .vidioc_g_crop = cx25821_vidioc_g_crop,
+       .vidioc_enum_input = cx25821_vidioc_enum_input,
+       .vidioc_g_input = cx25821_vidioc_g_input,
+       .vidioc_s_input = cx25821_vidioc_s_input,
+       .vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
+       .vidioc_s_ctrl = vidioc_s_ctrl,
+       .vidioc_queryctrl = cx25821_vidioc_queryctrl,
+       .vidioc_streamon = vidioc_streamon,
+       .vidioc_streamoff = vidioc_streamoff,
+       .vidioc_log_status = vidioc_log_status,
+       .vidioc_g_priority = cx25821_vidioc_g_priority,
+       .vidioc_s_priority = cx25821_vidioc_s_priority,
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+       .vidiocgmbuf = cx25821_vidiocgmbuf,
+#endif
+#ifdef TUNER_FLAG
+       .vidioc_g_tuner = cx25821_vidioc_g_tuner,
+       .vidioc_s_tuner = cx25821_vidioc_s_tuner,
+       .vidioc_g_frequency = cx25821_vidioc_g_frequency,
+       .vidioc_s_frequency = cx25821_vidioc_s_frequency,
+#endif
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+       .vidioc_g_register = cx25821_vidioc_g_register,
+       .vidioc_s_register = cx25821_vidioc_s_register,
+#endif
+};
+
+struct video_device cx25821_videoioctl_template = {
+	       .name = "cx25821-videoioctl",
+	       .fops = &video_fops,
+	       .ioctl_ops = &video_ioctl_ops,
+	       .tvnorms = CX25821_NORMS,
+	       .current_norm = V4L2_STD_NTSC_M,
+};
diff --git a/drivers/staging/cx25821/cx25821-video.h b/drivers/staging/cx25821/cx25821-video.h
index 0bddc02be57..cc6034b1a95 100644
--- a/drivers/staging/cx25821/cx25821-video.h
+++ b/drivers/staging/cx25821/cx25821-video.h
@@ -54,7 +54,7 @@
 	printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
     } while (0)
 
-//For IOCTL to identify running upstream
+/* For IOCTL to identify running upstream */
 #define UPSTREAM_START_VIDEO        700
 #define UPSTREAM_STOP_VIDEO         701
 #define UPSTREAM_START_AUDIO        702
@@ -80,19 +80,8 @@ extern struct sram_channel *channel7;
 extern struct sram_channel *channel9;
 extern struct sram_channel *channel10;
 extern struct sram_channel *channel11;
-extern struct video_device cx25821_video_template0;
-extern struct video_device cx25821_video_template1;
-extern struct video_device cx25821_video_template2;
-extern struct video_device cx25821_video_template3;
-extern struct video_device cx25821_video_template4;
-extern struct video_device cx25821_video_template5;
-extern struct video_device cx25821_video_template6;
-extern struct video_device cx25821_video_template7;
-extern struct video_device cx25821_video_template9;
-extern struct video_device cx25821_video_template10;
-extern struct video_device cx25821_video_template11;
 extern struct video_device cx25821_videoioctl_template;
-//extern const u32 *ctrl_classes[];
+/* extern const u32 *ctrl_classes[]; */
 
 extern unsigned int vid_limit;
 
@@ -113,7 +102,7 @@ extern int cx25821_set_tvnorm(struct cx25821_dev *dev, v4l2_std_id norm);
 extern int cx25821_res_get(struct cx25821_dev *dev, struct cx25821_fh *fh,
 		   unsigned int bit);
 extern int cx25821_res_check(struct cx25821_fh *fh, unsigned int bit);
-extern int cx25821_res_locked(struct cx25821_dev *dev, unsigned int bit);
+extern int cx25821_res_locked(struct cx25821_fh *fh, unsigned int bit);
 extern void cx25821_res_free(struct cx25821_dev *dev, struct cx25821_fh *fh,
 		     unsigned int bits);
 extern int cx25821_video_mux(struct cx25821_dev *dev, unsigned int input);
@@ -126,8 +115,7 @@ extern int cx25821_set_scale(struct cx25821_dev *dev, unsigned int width,
 			     unsigned int height, enum v4l2_field field);
 extern int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status);
 extern void cx25821_video_unregister(struct cx25821_dev *dev, int chan_num);
-extern int cx25821_video_register(struct cx25821_dev *dev, int chan_num,
-				  struct video_device *video_template);
+extern int cx25821_video_register(struct cx25821_dev *dev);
 extern int cx25821_get_format_size(void);
 
 extern int cx25821_buffer_setup(struct videobuf_queue *q, unsigned int *count,
diff --git a/drivers/staging/cx25821/cx25821-video0.c b/drivers/staging/cx25821/cx25821-video0.c
deleted file mode 100644
index 0be2cc15d85..00000000000
--- a/drivers/staging/cx25821/cx25821-video0.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH00];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH00]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH00;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO0))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO0)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH00]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel0->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO0)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO0);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO0)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO0);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = PIXEL_FRMT_422;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH00, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH00] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH00] = 0;
-	}
-	dev->cif_width[SRAM_CH00] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH00);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH00].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH00];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 0 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH00);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template0 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video1.c b/drivers/staging/cx25821/cx25821-video1.c
deleted file mode 100644
index b0bae627bfb..00000000000
--- a/drivers/staging/cx25821/cx25821-video1.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH01];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH01]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH01;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO1))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO1)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH01]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel1->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO1)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO1);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO1)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO1);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH01, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH01] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH01] = 0;
-	}
-	dev->cif_width[SRAM_CH01] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH01);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH01].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH01];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 1 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH01);
-}
-
-//exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template1 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video2.c b/drivers/staging/cx25821/cx25821-video2.c
deleted file mode 100644
index 400cdb80674..00000000000
--- a/drivers/staging/cx25821/cx25821-video2.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH02];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH02]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH02;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO2))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO2)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH02]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel2->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO2)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO2);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO2)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO2);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH02, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH02] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH02] = 0;
-	}
-	dev->cif_width[SRAM_CH02] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH02);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH02].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH02];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 2 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH02);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template2 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video3.c b/drivers/staging/cx25821/cx25821-video3.c
deleted file mode 100644
index 3b216ed0906..00000000000
--- a/drivers/staging/cx25821/cx25821-video3.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH03];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH03]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH03;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO3))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO3)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH03]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel3->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO3)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO3);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO3)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO3);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH03, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH03] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH03] = 0;
-	}
-	dev->cif_width[SRAM_CH03] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH03);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH03].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH03];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 3 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH03);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template3 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video4.c b/drivers/staging/cx25821/cx25821-video4.c
deleted file mode 100644
index f7b08c51868..00000000000
--- a/drivers/staging/cx25821/cx25821-video4.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH04];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH04]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH04;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO4))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO4)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH04]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel4->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO4)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO4);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO4)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO4);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	// check priority
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH04, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH04] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH04] = 0;
-	}
-	dev->cif_width[SRAM_CH04] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH04);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH04].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH04];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 4 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH04);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template4 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video5.c b/drivers/staging/cx25821/cx25821-video5.c
deleted file mode 100644
index 59370337b07..00000000000
--- a/drivers/staging/cx25821/cx25821-video5.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH05];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH05]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH05;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO5))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO5)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH05]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel5->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO5)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO5);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO5)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO5);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH05, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH05] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH05] = 0;
-	}
-	dev->cif_width[SRAM_CH05] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH05);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH05].count;
-
-	return ret_val;
-}
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH05];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 5 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH05);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template5 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video6.c b/drivers/staging/cx25821/cx25821-video6.c
deleted file mode 100644
index 4db2eb83d35..00000000000
--- a/drivers/staging/cx25821/cx25821-video6.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH06];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH06]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH06;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO6))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO6)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH06]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel6->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO6)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO6);
-	}
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO6)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO6);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH06, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH06] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH06] = 0;
-	}
-	dev->cif_width[SRAM_CH06] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH06);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH06].count;
-
-	return ret_val;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH06];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 6 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH06);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template6 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-video7.c b/drivers/staging/cx25821/cx25821-video7.c
deleted file mode 100644
index 5e4a769bada..00000000000
--- a/drivers/staging/cx25821/cx25821-video7.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH07];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH07]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = SRAM_CH07;
-	pix_format =
-	    (dev->pixel_formats[dev->channel_opened] ==
-	     PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO7))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO7)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) {
-		if (buf->vb.state == VIDEOBUF_DONE) {
-			struct cx25821_dev *dev = fh->dev;
-
-			if (dev && dev->use_cif_resolution[SRAM_CH07]) {
-				u8 cam_id = *((char *)buf->vb.baddr + 3);
-				memcpy((char *)buf->vb.baddr,
-				       (char *)buf->vb.baddr + (fh->width * 2),
-				       (fh->width * 2));
-				*((char *)buf->vb.baddr + 3) = cam_id;
-			}
-		}
-
-		return POLLIN | POLLRDNORM;
-	}
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	cx_write(channel7->dma_ctl, 0);	/* FIFO and RISC disable */
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO7)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO7);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO7)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO7);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-	int pix_format = 0;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->vidq.field = f->fmt.pix.field;
-
-	// check if width and height is valid based on set standard
-	if (cx25821_is_valid_width(f->fmt.pix.width, dev->tvnorm)) {
-		fh->width = f->fmt.pix.width;
-	}
-
-	if (cx25821_is_valid_height(f->fmt.pix.height, dev->tvnorm)) {
-		fh->height = f->fmt.pix.height;
-	}
-
-	if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_Y41P)
-		pix_format = PIXEL_FRMT_411;
-	else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUYV)
-		pix_format = PIXEL_FRMT_422;
-	else
-		return -EINVAL;
-
-	cx25821_set_pixel_format(dev, SRAM_CH07, pix_format);
-
-	// check if cif resolution
-	if (fh->width == 320 || fh->width == 352) {
-		dev->use_cif_resolution[SRAM_CH07] = 1;
-	} else {
-		dev->use_cif_resolution[SRAM_CH07] = 0;
-	}
-	dev->cif_width[SRAM_CH07] = fh->width;
-	medusa_set_resolution(dev, fh->width, SRAM_CH07);
-
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	int ret_val = 0;
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-
-	ret_val = videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-
-	p->sequence = dev->vidq[SRAM_CH07].count;
-
-	return ret_val;
-}
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	struct sram_channel *sram_ch = &dev->sram_channels[SRAM_CH07];
-	u32 tmp = 0;
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-
-	tmp = cx_read(sram_ch->dma_ctl);
-	printk(KERN_INFO "Video input 7 is %s\n",
-	       (tmp & 0x11) ? "streaming" : "stopped");
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return cx25821_set_control(dev, ctl, SRAM_CH07);
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template7 = {
-	.name = "cx25821-video",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-videoioctl.c b/drivers/staging/cx25821/cx25821-videoioctl.c
deleted file mode 100644
index d16807d88be..00000000000
--- a/drivers/staging/cx25821/cx25821-videoioctl.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[VIDEO_IOCTL_CH];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[VIDEO_IOCTL_CH]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	u32 pix_format;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = VIDEO_IOCTL_CH;
-	pix_format = V4L2_PIX_FMT_YUYV;
-	fh->fmt = format_by_fourcc(pix_format);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO_IOCTL))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO_IOCTL)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO_IOCTL)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO_IOCTL);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO_IOCTL)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO_IOCTL);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->width = f->fmt.pix.width;
-	fh->height = f->fmt.pix.height;
-	fh->vidq.field = f->fmt.pix.field;
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct cx25821_fh *fh = priv;
-	return videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-}
-
-static long video_ioctl_set(struct file *file, unsigned int cmd,
-			    unsigned long arg)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct downstream_user_struct *data_from_user;
-	int command;
-	int width = 720;
-	int selected_channel = 0, pix_format = 0, i = 0;
-	int cif_enable = 0, cif_width = 0;
-	u32 value = 0;
-
-	data_from_user = (struct downstream_user_struct *)arg;
-
-	if (!data_from_user) {
-		printk("cx25821 in %s(): User data is INVALID. Returning.\n",
-		       __func__);
-		return 0;
-	}
-
-	command = data_from_user->command;
-
-	if (command != SET_VIDEO_STD && command != SET_PIXEL_FORMAT
-	    && command != ENABLE_CIF_RESOLUTION && command != REG_READ
-	    && command != REG_WRITE && command != MEDUSA_READ
-	    && command != MEDUSA_WRITE) {
-		return 0;
-	}
-
-	switch (command) {
-	case SET_VIDEO_STD:
-		dev->tvnorm =
-		    !strcmp(data_from_user->vid_stdname,
-			    "PAL") ? V4L2_STD_PAL_BG : V4L2_STD_NTSC_M;
-		medusa_set_videostandard(dev);
-		break;
-
-	case SET_PIXEL_FORMAT:
-		selected_channel = data_from_user->decoder_select;
-		pix_format = data_from_user->pixel_format;
-
-		if (!(selected_channel <= 7 && selected_channel >= 0)) {
-			selected_channel -= 4;
-			selected_channel = selected_channel % 8;
-		}
-
-		if (selected_channel >= 0)
-			cx25821_set_pixel_format(dev, selected_channel,
-						 pix_format);
-
-		break;
-
-	case ENABLE_CIF_RESOLUTION:
-		selected_channel = data_from_user->decoder_select;
-		cif_enable = data_from_user->cif_resolution_enable;
-		cif_width = data_from_user->cif_width;
-
-		if (cif_enable) {
-			if (dev->tvnorm & V4L2_STD_PAL_BG
-			    || dev->tvnorm & V4L2_STD_PAL_DK)
-				width = 352;
-			else
-				width = (cif_width == 320
-					 || cif_width == 352) ? cif_width : 320;
-		}
-
-		if (!(selected_channel <= 7 && selected_channel >= 0)) {
-			selected_channel -= 4;
-			selected_channel = selected_channel % 8;
-		}
-
-		if (selected_channel <= 7 && selected_channel >= 0) {
-			dev->use_cif_resolution[selected_channel] = cif_enable;
-			dev->cif_width[selected_channel] = width;
-		} else {
-			for (i = 0; i < VID_CHANNEL_NUM; i++) {
-				dev->use_cif_resolution[i] = cif_enable;
-				dev->cif_width[i] = width;
-			}
-		}
-
-		medusa_set_resolution(dev, width, selected_channel);
-		break;
-	case REG_READ:
-		data_from_user->reg_data = cx_read(data_from_user->reg_address);
-		break;
-	case REG_WRITE:
-		cx_write(data_from_user->reg_address, data_from_user->reg_data);
-		break;
-	case MEDUSA_READ:
-		value =
-		    cx25821_i2c_read(&dev->i2c_bus[0],
-				     (u16) data_from_user->reg_address,
-				     &data_from_user->reg_data);
-		break;
-	case MEDUSA_WRITE:
-		cx25821_i2c_write(&dev->i2c_bus[0],
-				  (u16) data_from_user->reg_address,
-				  data_from_user->reg_data);
-		break;
-	}
-
-	return 0;
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return 0;
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl_set,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_videoioctl_template = {
-	.name = "cx25821-videoioctl",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-vidups10.c b/drivers/staging/cx25821/cx25821-vidups10.c
deleted file mode 100644
index c746a17ccbd..00000000000
--- a/drivers/staging/cx25821/cx25821-vidups10.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH10];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH10]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = 9;
-	fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO10))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO10)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	//cx_write(channel10->dma_ctl, 0);
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO10)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO10);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO10)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO10);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static long video_ioctl_upstream10(struct file *file, unsigned int cmd,
-				   unsigned long arg)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-	int command = 0;
-	struct upstream_user_struct *data_from_user;
-
-	data_from_user = (struct upstream_user_struct *)arg;
-
-	if (!data_from_user) {
-		printk
-		    ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		     __func__);
-		return 0;
-	}
-
-	command = data_from_user->command;
-
-	if (command != UPSTREAM_START_VIDEO && command != UPSTREAM_STOP_VIDEO) {
-		return 0;
-	}
-
-	dev->input_filename_ch2 = data_from_user->input_filename;
-	dev->input_audiofilename = data_from_user->input_filename;
-	dev->vid_stdname_ch2 = data_from_user->vid_stdname;
-	dev->pixel_format_ch2 = data_from_user->pixel_format;
-	dev->channel_select_ch2 = data_from_user->channel_select;
-	dev->command_ch2 = data_from_user->command;
-
-	switch (command) {
-	case UPSTREAM_START_VIDEO:
-		cx25821_start_upstream_video_ch2(dev, data_from_user);
-		break;
-
-	case UPSTREAM_STOP_VIDEO:
-		cx25821_stop_upstream_video_ch2(dev);
-		break;
-	}
-
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->width = f->fmt.pix.width;
-	fh->height = f->fmt.pix.height;
-	fh->vidq.field = f->fmt.pix.field;
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct cx25821_fh *fh = priv;
-	return videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-}
-
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return 0;
-}
-
-//exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl_upstream10,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template10 = {
-	.name = "cx25821-upstream10",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821-vidups9.c b/drivers/staging/cx25821/cx25821-vidups9.c
deleted file mode 100644
index 466e0f34ae3..00000000000
--- a/drivers/staging/cx25821/cx25821-vidups9.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- *  Driver for the Conexant CX25821 PCIe bridge
- *
- *  Copyright (C) 2009 Conexant Systems Inc.
- *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
- *  Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx25821-video.h"
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
-	struct cx25821_buffer *buf =
-	    container_of(vb, struct cx25821_buffer, vb);
-	struct cx25821_buffer *prev;
-	struct cx25821_fh *fh = vq->priv_data;
-	struct cx25821_dev *dev = fh->dev;
-	struct cx25821_dmaqueue *q = &dev->vidq[SRAM_CH09];
-
-	/* add jump to stopper */
-	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
-	buf->risc.jmp[2] = cpu_to_le32(0);	/* bits 63-32 */
-
-	dprintk(2, "jmp to stopper (0x%x)\n", buf->risc.jmp[1]);
-
-	if (!list_empty(&q->queued)) {
-		list_add_tail(&buf->vb.queue, &q->queued);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf,
-			buf->vb.i);
-
-	} else if (list_empty(&q->active)) {
-		list_add_tail(&buf->vb.queue, &q->active);
-		cx25821_start_video_dma(dev, q, buf,
-					&dev->sram_channels[SRAM_CH09]);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		buf->count = q->count++;
-		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
-		dprintk(2,
-			"[%p/%d] buffer_queue - first active, buf cnt = %d, q->count = %d\n",
-			buf, buf->vb.i, buf->count, q->count);
-	} else {
-		prev =
-		    list_entry(q->active.prev, struct cx25821_buffer, vb.queue);
-		if (prev->vb.width == buf->vb.width
-		    && prev->vb.height == buf->vb.height
-		    && prev->fmt == buf->fmt) {
-			list_add_tail(&buf->vb.queue, &q->active);
-			buf->vb.state = VIDEOBUF_ACTIVE;
-			buf->count = q->count++;
-			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
-
-			/* 64 bit bits 63-32 */
-			prev->risc.jmp[2] = cpu_to_le32(0);
-			dprintk(2,
-				"[%p/%d] buffer_queue - append to active, buf->count=%d\n",
-				buf, buf->vb.i, buf->count);
-
-		} else {
-			list_add_tail(&buf->vb.queue, &q->queued);
-			buf->vb.state = VIDEOBUF_QUEUED;
-			dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf,
-				buf->vb.i);
-		}
-	}
-
-	if (list_empty(&q->active)) {
-		dprintk(2, "active queue empty!\n");
-	}
-}
-
-static struct videobuf_queue_ops cx25821_video_qops = {
-	.buf_setup = cx25821_buffer_setup,
-	.buf_prepare = cx25821_buffer_prepare,
-	.buf_queue = buffer_queue,
-	.buf_release = cx25821_buffer_release,
-};
-
-static int video_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct cx25821_dev *dev = video_drvdata(file);
-	struct cx25821_fh *fh;
-	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	printk("open dev=%s type=%s\n", video_device_node_name(vdev),
-		v4l2_type_names[type]);
-
-	/* allocate + initialize per filehandle data */
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh)
-		return -ENOMEM;
-
-	lock_kernel();
-
-	file->private_data = fh;
-	fh->dev = dev;
-	fh->type = type;
-	fh->width = 720;
-
-	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
-		fh->height = 576;
-	else
-		fh->height = 480;
-
-	dev->channel_opened = 8;
-	fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV);
-
-	v4l2_prio_open(&dev->prio, &fh->prio);
-
-	videobuf_queue_sg_init(&fh->vidq, &cx25821_video_qops,
-			       &dev->pci->dev, &dev->slock,
-			       V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			       V4L2_FIELD_INTERLACED,
-			       sizeof(struct cx25821_buffer), fh);
-
-	dprintk(1, "post videobuf_queue_init()\n");
-	unlock_kernel();
-
-	return 0;
-}
-
-static ssize_t video_read(struct file *file, char __user * data, size_t count,
-			  loff_t * ppos)
-{
-	struct cx25821_fh *fh = file->private_data;
-
-	switch (fh->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (cx25821_res_locked(fh->dev, RESOURCE_VIDEO9))
-			return -EBUSY;
-
-		return videobuf_read_one(&fh->vidq, data, count, ppos,
-					 file->f_flags & O_NONBLOCK);
-
-	default:
-		BUG();
-		return 0;
-	}
-}
-
-static unsigned int video_poll(struct file *file,
-			       struct poll_table_struct *wait)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_buffer *buf;
-
-	if (cx25821_res_check(fh, RESOURCE_VIDEO9)) {
-		/* streaming capture */
-		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
-		buf = list_entry(fh->vidq.stream.next,
-				 struct cx25821_buffer, vb.stream);
-	} else {
-		/* read() capture */
-		buf = (struct cx25821_buffer *)fh->vidq.read_buf;
-		if (NULL == buf)
-			return POLLERR;
-	}
-
-	poll_wait(file, &buf->vb.done, wait);
-	if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static int video_release(struct file *file)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-
-	//stop the risc engine and fifo
-	//cx_write(channel9->dma_ctl, 0);
-
-	/* stop video capture */
-	if (cx25821_res_check(fh, RESOURCE_VIDEO9)) {
-		videobuf_queue_cancel(&fh->vidq);
-		cx25821_res_free(dev, fh, RESOURCE_VIDEO9);
-	}
-
-	if (fh->vidq.read_buf) {
-		cx25821_buffer_release(&fh->vidq, fh->vidq.read_buf);
-		kfree(fh->vidq.read_buf);
-	}
-
-	videobuf_mmap_free(&fh->vidq);
-
-	v4l2_prio_close(&dev->prio, fh->prio);
-
-	file->private_data = NULL;
-	kfree(fh);
-
-	return 0;
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-
-	if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(i != fh->type)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!cx25821_res_get(dev, fh, cx25821_get_resource(fh, RESOURCE_VIDEO9)))) {
-		return -EBUSY;
-	}
-
-	return videobuf_streamon(get_queue(fh));
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = fh->dev;
-	int err, res;
-
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (i != fh->type)
-		return -EINVAL;
-
-	res = cx25821_get_resource(fh, RESOURCE_VIDEO9);
-	err = videobuf_streamoff(get_queue(fh));
-	if (err < 0)
-		return err;
-	cx25821_res_free(dev, fh, res);
-	return 0;
-}
-
-static long video_ioctl_upstream9(struct file *file, unsigned int cmd,
-				  unsigned long arg)
-{
-	struct cx25821_fh *fh = file->private_data;
-	struct cx25821_dev *dev = fh->dev;
-	int command = 0;
-	struct upstream_user_struct *data_from_user;
-
-	data_from_user = (struct upstream_user_struct *)arg;
-
-	if (!data_from_user) {
-		printk
-		    ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		     __func__);
-		return 0;
-	}
-
-	command = data_from_user->command;
-
-	if (command != UPSTREAM_START_VIDEO && command != UPSTREAM_STOP_VIDEO) {
-		return 0;
-	}
-
-	dev->input_filename = data_from_user->input_filename;
-	dev->input_audiofilename = data_from_user->input_filename;
-	dev->vid_stdname = data_from_user->vid_stdname;
-	dev->pixel_format = data_from_user->pixel_format;
-	dev->channel_select = data_from_user->channel_select;
-	dev->command = data_from_user->command;
-
-	switch (command) {
-	case UPSTREAM_START_VIDEO:
-		cx25821_start_upstream_video_ch1(dev, data_from_user);
-		break;
-
-	case UPSTREAM_STOP_VIDEO:
-		cx25821_stop_upstream_video_ch1(dev);
-		break;
-	}
-
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct cx25821_fh *fh = priv;
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	int err;
-
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	dprintk(2, "%s()\n", __func__);
-	err = cx25821_vidioc_try_fmt_vid_cap(file, priv, f);
-
-	if (0 != err)
-		return err;
-	fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	fh->width = f->fmt.pix.width;
-	fh->height = f->fmt.pix.height;
-	fh->vidq.field = f->fmt.pix.field;
-	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-		fh->height, fh->vidq.field);
-	cx25821_call_all(dev, video, s_fmt, f);
-	return 0;
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct cx25821_fh *fh = priv;
-	return videobuf_dqbuf(get_queue(fh), p, file->f_flags & O_NONBLOCK);
-}
-static int vidioc_log_status(struct file *file, void *priv)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	char name[32 + 2];
-
-	snprintf(name, sizeof(name), "%s/2", dev->name);
-	printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	       dev->name);
-	cx25821_call_all(dev, core, log_status);
-	printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	       dev->name);
-	return 0;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctl)
-{
-	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
-	struct cx25821_fh *fh = priv;
-	int err;
-	if (fh) {
-		err = v4l2_prio_check(&dev->prio, fh->prio);
-		if (0 != err)
-			return err;
-	}
-
-	return 0;
-}
-
-// exported stuff
-static const struct v4l2_file_operations video_fops = {
-	.owner = THIS_MODULE,
-	.open = video_open,
-	.release = video_release,
-	.read = video_read,
-	.poll = video_poll,
-	.mmap = cx25821_video_mmap,
-	.ioctl = video_ioctl_upstream9,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
-	.vidioc_querycap = cx25821_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cx25821_vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = cx25821_vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = cx25821_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_reqbufs = cx25821_vidioc_reqbufs,
-	.vidioc_querybuf = cx25821_vidioc_querybuf,
-	.vidioc_qbuf = cx25821_vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-#ifdef TUNER_FLAG
-	.vidioc_s_std = cx25821_vidioc_s_std,
-	.vidioc_querystd = cx25821_vidioc_querystd,
-#endif
-	.vidioc_cropcap = cx25821_vidioc_cropcap,
-	.vidioc_s_crop = cx25821_vidioc_s_crop,
-	.vidioc_g_crop = cx25821_vidioc_g_crop,
-	.vidioc_enum_input = cx25821_vidioc_enum_input,
-	.vidioc_g_input = cx25821_vidioc_g_input,
-	.vidioc_s_input = cx25821_vidioc_s_input,
-	.vidioc_g_ctrl = cx25821_vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
-	.vidioc_queryctrl = cx25821_vidioc_queryctrl,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
-	.vidioc_log_status = vidioc_log_status,
-	.vidioc_g_priority = cx25821_vidioc_g_priority,
-	.vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
-#ifdef TUNER_FLAG
-	.vidioc_g_tuner = cx25821_vidioc_g_tuner,
-	.vidioc_s_tuner = cx25821_vidioc_s_tuner,
-	.vidioc_g_frequency = cx25821_vidioc_g_frequency,
-	.vidioc_s_frequency = cx25821_vidioc_s_frequency,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register = cx25821_vidioc_g_register,
-	.vidioc_s_register = cx25821_vidioc_s_register,
-#endif
-};
-
-struct video_device cx25821_video_template9 = {
-	.name = "cx25821-upstream9",
-	.fops = &video_fops,
-	.ioctl_ops = &video_ioctl_ops,
-	.tvnorms = CX25821_NORMS,
-	.current_norm = V4L2_STD_NTSC_M,
-};
diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/staging/cx25821/cx25821.h
index cf2286d83b6..1b628f61578 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/staging/cx25821/cx25821.h
@@ -61,7 +61,7 @@
 #define FALSE   0
 #define LINE_SIZE_D1    1440
 
-// Number of decoders and encoders
+/* Number of decoders and encoders */
 #define MAX_DECODERS            8
 #define MAX_ENCODERS            2
 #define QUAD_DECODERS           4
@@ -139,6 +139,7 @@ struct cx25821_fh {
 	/* video capture */
 	struct cx25821_fmt *fmt;
 	unsigned int width, height;
+    int channel_id;
 
 	/* vbi capture */
 	struct videobuf_queue vidq;
@@ -236,13 +237,34 @@ struct cx25821_data {
 	struct sram_channel *channel;
 };
 
+struct cx25821_channel {
+       struct v4l2_prio_state prio;
+
+       int ctl_bright;
+       int ctl_contrast;
+       int ctl_hue;
+       int ctl_saturation;
+
+       struct cx25821_data timeout_data;
+
+       struct video_device *video_dev;
+       struct cx25821_dmaqueue vidq;
+
+       struct sram_channel *sram_channels;
+
+       struct mutex lock;
+       int resources;
+
+       int pixel_formats;
+       int use_cif_resolution;
+       int cif_width;
+};
+
 struct cx25821_dev {
 	struct list_head devlist;
 	atomic_t refcount;
 	struct v4l2_device v4l2_dev;
 
-	struct v4l2_prio_state prio;
-
 	/* pci stuff */
 	struct pci_dev *pci;
 	unsigned char pci_rev, pci_lat;
@@ -261,13 +283,12 @@ struct cx25821_dev {
 	int nr;
 	struct mutex lock;
 
+    struct cx25821_channel channels[MAX_VID_CHANNEL_NUM];
+
 	/* board details */
 	unsigned int board;
 	char name[32];
 
-	/* sram configuration */
-	struct sram_channel *sram_channels;
-
 	/* Analog video */
 	u32 resources;
 	unsigned int input;
@@ -282,13 +303,6 @@ struct cx25821_dev {
 	unsigned char videc_addr;
 	unsigned short _max_num_decoders;
 
-	int ctl_bright;
-	int ctl_contrast;
-	int ctl_hue;
-	int ctl_saturation;
-
-	struct cx25821_data timeout_data[MAX_VID_CHANNEL_NUM];
-
 	/* Analog Audio Upstream */
 	int _audio_is_running;
 	int _audiopixel_format;
@@ -297,7 +311,7 @@ struct cx25821_dev {
 	int _audio_lines_count;
 	int _audioframe_count;
 	int _audio_upstream_channel_select;
-	int _last_index_irq;	//The last interrupt index processed.
+       int _last_index_irq;    /* The last interrupt index processed. */
 
 	__le32 *_risc_audio_jmp_addr;
 	__le32 *_risc_virt_start_addr;
@@ -313,12 +327,10 @@ struct cx25821_dev {
 
 	/* V4l */
 	u32 freq;
-	struct video_device *video_dev[MAX_VID_CHANNEL_NUM];
 	struct video_device *vbi_dev;
 	struct video_device *radio_dev;
 	struct video_device *ioctl_dev;
 
-	struct cx25821_dmaqueue vidq[MAX_VID_CHANNEL_NUM];
 	spinlock_t slock;
 
 	/* Video Upstream */
@@ -401,9 +413,6 @@ struct cx25821_dev {
 	int pixel_format;
 	int channel_select;
 	int command;
-	int pixel_formats[VID_CHANNEL_NUM];
-	int use_cif_resolution[VID_CHANNEL_NUM];
-	int cif_width[VID_CHANNEL_NUM];
 	int channel_opened;
 };
 
@@ -482,7 +491,7 @@ struct sram_channel {
 	u32 fld_aud_fifo_en;
 	u32 fld_aud_risc_en;
 
-	//For Upstream Video
+       /* For Upstream Video */
 	u32 vid_fmt_ctl;
 	u32 vid_active_ctl1;
 	u32 vid_active_ctl2;
diff --git a/drivers/staging/dream/synaptics_i2c_rmi.c b/drivers/staging/dream/synaptics_i2c_rmi.c
index 1f020dad623..3320359408a 100644
--- a/drivers/staging/dream/synaptics_i2c_rmi.c
+++ b/drivers/staging/dream/synaptics_i2c_rmi.c
@@ -519,7 +519,6 @@ err_input_register_device_failed:
 err_input_dev_alloc_failed:
 err_detect_failed:
 err_power_failed:
-	i2c_set_clientdata(client, NULL);
 	kfree(ts);
 err_alloc_data_failed:
 err_check_functionality_failed:
@@ -537,7 +536,6 @@ static int synaptics_ts_remove(struct i2c_client *client)
 	else
 		hrtimer_cancel(&ts->timer);
 	input_unregister_device(ts->input_dev);
-	i2c_set_clientdata(client, NULL);
 	kfree(ts);
 	return 0;
 }
diff --git a/drivers/staging/dt3155/allocator.c b/drivers/staging/dt3155/allocator.c
index bd5adbc2a23..d33947b0378 100644
--- a/drivers/staging/dt3155/allocator.c
+++ b/drivers/staging/dt3155/allocator.c
@@ -176,9 +176,7 @@ int allocator_free_dma(unsigned long address)
 	prev = ptr; ptr = ptr->next;
 
 	if (!ptr) {
-		printk(KERN_ERR ALL_MSG
-			"free_dma(0x%08lx) but add. not allocated\n",
-			ptr->address);
+		pr_err(ALL_MSG "free_dma but add. not allocated\n");
 		return -EINVAL;
 	}
 	PDEBUGG("freeing: %08lx (%li) next %08lx\n", ptr->address, ptr->size,
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index bd925457f8b..72f5c1f56d1 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -289,7 +289,6 @@ static int wis_saa7113_probe(struct i2c_client *client,
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7113: error initializing SAA7113\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(dec);
 		return -ENODEV;
 	}
@@ -301,7 +300,6 @@ static int wis_saa7113_remove(struct i2c_client *client)
 {
 	struct wis_saa7113 *dec = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index b2eb804c195..cd950b61cf7 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -422,7 +422,6 @@ static int wis_saa7115_probe(struct i2c_client *client,
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7115: error initializing SAA7115\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(dec);
 		return -ENODEV;
 	}
@@ -434,7 +433,6 @@ static int wis_saa7115_remove(struct i2c_client *client)
 {
 	struct wis_saa7115 *dec = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index b1013291190..981c9b311b8 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -684,7 +684,6 @@ static int wis_sony_tuner_remove(struct i2c_client *client)
 {
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(t);
 	return 0;
 }
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 315268d130d..ee28a99dc38 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -323,7 +323,6 @@ static int wis_tw2804_remove(struct i2c_client *client)
 {
 	struct wis_tw2804 *dec = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index 2afea09091b..80d47269b1c 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -294,7 +294,6 @@ static int wis_tw9903_probe(struct i2c_client *client,
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(dec);
 		return -ENODEV;
 	}
@@ -306,7 +305,6 @@ static int wis_tw9903_remove(struct i2c_client *client)
 {
 	struct wis_tw9903 *dec = i2c_get_clientdata(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index 3f53b4d1e4c..12db555a3a5 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/completion.h>
 #include "osd.h"
 #include "logging.h"
 #include "vmbus_private.h"
@@ -293,6 +294,25 @@ void FreeVmbusChannel(struct vmbus_channel *Channel)
 			      Channel);
 }
 
+
+DECLARE_COMPLETION(hv_channel_ready);
+
+/*
+ * Count initialized channels, and ensure all channels are ready when hv_vmbus
+ * module loading completes.
+ */
+static void count_hv_channel(void)
+{
+	static int counter;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gVmbusConnection.channel_lock, flags);
+	if (++counter == MAX_MSG_TYPES)
+		complete(&hv_channel_ready);
+	spin_unlock_irqrestore(&gVmbusConnection.channel_lock, flags);
+}
+
+
 /*
  * VmbusChannelProcessOffer - Process the offer by creating a channel/device
  * associated with this offer
@@ -373,22 +393,21 @@ static void VmbusChannelProcessOffer(void *context)
 		 * can cleanup properly
 		 */
 		newChannel->State = CHANNEL_OPEN_STATE;
-		cnt = 0;
 
-		while (cnt != MAX_MSG_TYPES) {
+		/* Open IC channels */
+		for (cnt = 0; cnt < MAX_MSG_TYPES; cnt++) {
 			if (memcmp(&newChannel->OfferMsg.Offer.InterfaceType,
 				   &hv_cb_utils[cnt].data,
-				   sizeof(struct hv_guid)) == 0) {
+				   sizeof(struct hv_guid)) == 0 &&
+				VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
+						 2 * PAGE_SIZE, NULL, 0,
+						 hv_cb_utils[cnt].callback,
+						 newChannel) == 0) {
+				hv_cb_utils[cnt].channel = newChannel;
 				DPRINT_INFO(VMBUS, "%s",
-					    hv_cb_utils[cnt].log_msg);
-
-				if (VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
-						    2 * PAGE_SIZE, NULL, 0,
-						    hv_cb_utils[cnt].callback,
-						    newChannel) == 0)
-					hv_cb_utils[cnt].channel = newChannel;
+						hv_cb_utils[cnt].log_msg);
+				count_hv_channel();
 			}
-			cnt++;
 		}
 	}
 	DPRINT_EXIT(VMBUS);
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 8a49aafea37..2adc9b48ca9 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -24,6 +24,8 @@
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/reboot.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
 
 #include "logging.h"
 #include "osd.h"
@@ -251,10 +253,36 @@ static void heartbeat_onchannelcallback(void *context)
 	DPRINT_EXIT(VMBUS);
 }
 
+static const struct pci_device_id __initconst
+hv_utils_pci_table[] __maybe_unused = {
+	{ PCI_DEVICE(0x1414, 0x5353) }, /* Hyper-V emulated VGA controller */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_utils_pci_table);
+
+
+static const struct dmi_system_id __initconst
+hv_utils_dmi_table[] __maybe_unused  = {
+	{
+		.ident = "Hyper-V",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+			DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+		},
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(dmi, hv_utils_dmi_table);
+
+
 static int __init init_hyperv_utils(void)
 {
 	printk(KERN_INFO "Registering HyperV Utility Driver\n");
 
+	if (!dmi_check_system(hv_utils_dmi_table))
+		return -ENODEV;
+
 	hv_cb_utils[HV_SHUTDOWN_MSG].channel->OnChannelCallback =
 		&shutdown_onchannelcallback;
 	hv_cb_utils[HV_SHUTDOWN_MSG].callback = &shutdown_onchannelcallback;
diff --git a/drivers/staging/hv/vmbus.h b/drivers/staging/hv/vmbus.h
index 0c6ee0f487f..3c14b2926e0 100644
--- a/drivers/staging/hv/vmbus.h
+++ b/drivers/staging/hv/vmbus.h
@@ -74,4 +74,6 @@ int vmbus_child_driver_register(struct driver_context *driver_ctx);
 void vmbus_child_driver_unregister(struct driver_context *driver_ctx);
 void vmbus_get_interface(struct vmbus_channel_interface *interface);
 
+extern struct completion hv_channel_ready;
+
 #endif /* _VMBUS_H_ */
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index c21731a12ca..22c80ece638 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
+#include <linux/completion.h>
 #include "version_info.h"
 #include "osd.h"
 #include "logging.h"
@@ -356,6 +357,8 @@ static int vmbus_bus_init(int (*drv_init)(struct hv_driver *drv))
 
 	vmbus_drv_obj->GetChannelOffers();
 
+	wait_for_completion(&hv_channel_ready);
+
 cleanup:
 	DPRINT_EXIT(VMBUS_DRV);
 
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index a4555e6f133..014f6684fab 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -62,9 +62,8 @@ inline int find_type_by_name(const char *name, const char *type)
 					1) != 0) {
 				filename = malloc(strlen(iio_dir)
 						+ strlen(type)
-						+ 1
 						+ numstrlen
-						+ 1);
+						+ 6);
 				if (filename == NULL)
 					return -ENOMEM;
 				sprintf(filename, "%s%s%d/name",
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index 20e267448d1..905f8560d31 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -1011,7 +1011,6 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 error_free_st:
-	i2c_set_clientdata(client, NULL);
 	kfree(st);
 
 error_ret:
@@ -1030,7 +1029,6 @@ static int max1363_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	i2c_set_clientdata(client, NULL);
 	kfree(st);
 
 	return 0;
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 43aaacff4e7..e4b0a5ef1c1 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -694,7 +694,6 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 fail2:
 	iio_device_unregister(chip->indio_dev);
 fail1:
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return err;
 }
@@ -705,7 +704,6 @@ static int tsl2563_remove(struct i2c_client *client)
 
 	iio_device_unregister(chip->indio_dev);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index 1f14cd4770e..294272d0619 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -20,7 +20,7 @@ static inline int __iio_allocate_sw_ring_buffer(struct iio_sw_ring_buffer *ring,
 	if ((length == 0) || (bytes_per_datum == 0))
 		return -EINVAL;
 	__iio_update_ring_buffer(&ring->buf, bytes_per_datum, length);
-	ring->data = kmalloc(length*ring->buf.bpd, GFP_KERNEL);
+	ring->data = kmalloc(length*ring->buf.bpd, GFP_ATOMIC);
 	ring->read_p = NULL;
 	ring->write_p = NULL;
 	ring->last_written_p = NULL;
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
new file mode 100644
index 00000000000..968c2adee06
--- /dev/null
+++ b/drivers/staging/lirc/Kconfig
@@ -0,0 +1,110 @@
+#
+# LIRC driver(s) configuration
+#
+menuconfig LIRC_STAGING
+	bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+	help
+	  Say Y here, and all supported Linux Infrared Remote Control IR and
+	  RF receiver and transmitter drivers will be displayed. When paired
+	  with a remote control and the lirc daemon, the receiver drivers
+	  allow control of your Linux system via remote control.
+
+if LIRC_STAGING
+
+config LIRC_BT829
+        tristate "BT829 based hardware"
+	depends on LIRC_STAGING
+	help
+	  Driver for the IR interface on BT829-based hardware
+
+config LIRC_ENE0100
+	tristate "ENE KB3924/ENE0100 CIR Port Reciever"
+	depends on LIRC_STAGING
+	help
+	  This is a driver for CIR port handled by ENE KB3924 embedded
+	  controller found on some notebooks.
+	  It appears on PNP list as ENE0100.
+
+config LIRC_I2C
+	tristate "I2C Based IR Receivers"
+	depends on LIRC_STAGING
+	help
+	  Driver for I2C-based IR receivers, such as those commonly
+	  found onboard Hauppauge PVR-150/250/350 video capture cards
+
+config LIRC_IGORPLUGUSB
+	tristate "Igor Cesko's USB IR Receiver"
+	depends on LIRC_STAGING && USB
+	help
+	  Driver for Igor Cesko's USB IR Receiver
+
+config LIRC_IMON
+	tristate "Legacy SoundGraph iMON Receiver and Display"
+	depends on LIRC_STAGING
+	help
+	  Driver for the original SoundGraph iMON IR Receiver and Display
+
+	  Current generation iMON devices use the input layer imon driver.
+
+config LIRC_IT87
+	tristate "ITE IT87XX CIR Port Receiver"
+	depends on LIRC_STAGING
+	help
+	  Driver for the ITE IT87xx IR Receiver
+
+config LIRC_ITE8709
+	tristate "ITE8709 CIR Port Receiver"
+	depends on LIRC_STAGING && PNP
+	help
+	  Driver for the ITE8709 IR Receiver
+
+config LIRC_PARALLEL
+	tristate "Homebrew Parallel Port Receiver"
+	depends on LIRC_STAGING && !SMP
+	help
+	  Driver for Homebrew Parallel Port Receivers
+
+config LIRC_SASEM
+	tristate "Sasem USB IR Remote"
+	depends on LIRC_STAGING
+	help
+	  Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
+
+config LIRC_SERIAL
+	tristate "Homebrew Serial Port Receiver"
+	depends on LIRC_STAGING
+	help
+	  Driver for Homebrew Serial Port Receivers
+
+config LIRC_SERIAL_TRANSMITTER
+	bool "Serial Port Transmitter"
+	default y
+	depends on LIRC_SERIAL
+	help
+	  Serial Port Transmitter support
+
+config LIRC_SIR
+	tristate "Built-in SIR IrDA port"
+	depends on LIRC_STAGING
+	help
+	  Driver for the SIR IrDA port
+
+config LIRC_STREAMZAP
+	tristate "Streamzap PC Receiver"
+	depends on LIRC_STAGING
+	help
+	  Driver for the Streamzap PC Receiver
+
+config LIRC_TTUSBIR
+	tristate "Technotrend USB IR Receiver"
+	depends on LIRC_STAGING && USB
+	help
+	  Driver for the Technotrend USB IR Receiver
+
+config LIRC_ZILOG
+	tristate "Zilog/Hauppauge IR Transmitter"
+	depends on LIRC_STAGING
+	help
+	  Driver for the Zilog/Hauppauge IR Transmitter, found on
+	  PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
+endif
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
new file mode 100644
index 00000000000..a019182a7a3
--- /dev/null
+++ b/drivers/staging/lirc/Makefile
@@ -0,0 +1,19 @@
+# Makefile for the lirc drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
+obj-$(CONFIG_LIRC_ENE0100)	+= lirc_ene0100.o
+obj-$(CONFIG_LIRC_I2C)		+= lirc_i2c.o
+obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
+obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
+obj-$(CONFIG_LIRC_IT87)		+= lirc_it87.o
+obj-$(CONFIG_LIRC_ITE8709)	+= lirc_ite8709.o
+obj-$(CONFIG_LIRC_PARALLEL)	+= lirc_parallel.o
+obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
+obj-$(CONFIG_LIRC_SERIAL)	+= lirc_serial.o
+obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o
+obj-$(CONFIG_LIRC_STREAMZAP)	+= lirc_streamzap.o
+obj-$(CONFIG_LIRC_TTUSBIR)	+= lirc_ttusbir.o
+obj-$(CONFIG_LIRC_ZILOG)	+= lirc_zilog.o
diff --git a/drivers/staging/lirc/TODO b/drivers/staging/lirc/TODO
new file mode 100644
index 00000000000..b6cb593f55c
--- /dev/null
+++ b/drivers/staging/lirc/TODO
@@ -0,0 +1,8 @@
+- All drivers should either be ported to ir-core, or dropped entirely
+  (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an
+  example of a previously completed port).
+
+Please send patches to:
+Jarod Wilson <jarod@wilsonet.com>
+Greg Kroah-Hartman <greg@kroah.com>
+
diff --git a/drivers/staging/lirc/TODO.lirc_i2c b/drivers/staging/lirc/TODO.lirc_i2c
new file mode 100644
index 00000000000..1f0a6ff6543
--- /dev/null
+++ b/drivers/staging/lirc/TODO.lirc_i2c
@@ -0,0 +1,3 @@
+lirc_i2c provides support for some drivers that have already a RC
+driver under drivers/media/video. It should be integrated into those
+drivers, in special with drivers/media/video/ir-kbd-i2c.c.
diff --git a/drivers/staging/lirc/lirc_bt829.c b/drivers/staging/lirc/lirc_bt829.c
new file mode 100644
index 00000000000..33881025426
--- /dev/null
+++ b/drivers/staging/lirc/lirc_bt829.c
@@ -0,0 +1,383 @@
+/*
+ * Remote control driver for the TV-card based on bt829
+ *
+ *  by Leonid Froenchenko <lfroen@galileo.co.il>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <media/lirc_dev.h>
+
+static int poll_main(void);
+static int atir_init_start(void);
+
+static void write_index(unsigned char index, unsigned int value);
+static unsigned int read_index(unsigned char index);
+
+static void do_i2c_start(void);
+static void do_i2c_stop(void);
+
+static void seems_wr_byte(unsigned char al);
+static unsigned char seems_rd_byte(void);
+
+static unsigned int read_index(unsigned char al);
+static void write_index(unsigned char ah, unsigned int edx);
+
+static void cycle_delay(int cycle);
+
+static void do_set_bits(unsigned char bl);
+static unsigned char do_get_bits(void);
+
+#define DATA_PCI_OFF 0x7FFC00
+#define WAIT_CYCLE   20
+
+#define DRIVER_NAME "lirc_bt829"
+
+static int debug;
+#define dprintk(fmt, args...)						 \
+	do {								 \
+		if (debug)						 \
+			printk(KERN_DEBUG DRIVER_NAME ": "fmt, ## args); \
+	} while (0)
+
+static int atir_minor;
+static unsigned long pci_addr_phys;
+static unsigned char *pci_addr_lin;
+
+static struct lirc_driver atir_driver;
+
+static struct pci_dev *do_pci_probe(void)
+{
+	struct pci_dev *my_dev;
+	my_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+				PCI_DEVICE_ID_ATI_264VT, NULL);
+	if (my_dev) {
+		printk(KERN_ERR DRIVER_NAME ": Using device: %s\n",
+		       pci_name(my_dev));
+		pci_addr_phys = 0;
+		if (my_dev->resource[0].flags & IORESOURCE_MEM) {
+			pci_addr_phys = my_dev->resource[0].start;
+			printk(KERN_INFO DRIVER_NAME ": memory at 0x%08X\n",
+			       (unsigned int)pci_addr_phys);
+		}
+		if (pci_addr_phys == 0) {
+			printk(KERN_ERR DRIVER_NAME ": no memory resource ?\n");
+			return NULL;
+		}
+	} else {
+		printk(KERN_ERR DRIVER_NAME ": pci_probe failed\n");
+		return NULL;
+	}
+	return my_dev;
+}
+
+static int atir_add_to_buf(void *data, struct lirc_buffer *buf)
+{
+	unsigned char key;
+	int status;
+	status = poll_main();
+	key = (status >> 8) & 0xFF;
+	if (status & 0xFF) {
+		dprintk("reading key %02X\n", key);
+		lirc_buffer_write(buf, &key);
+		return 0;
+	}
+	return -ENODATA;
+}
+
+static int atir_set_use_inc(void *data)
+{
+	dprintk("driver is opened\n");
+	return 0;
+}
+
+static void atir_set_use_dec(void *data)
+{
+	dprintk("driver is closed\n");
+}
+
+int init_module(void)
+{
+	struct pci_dev *pdev;
+
+	pdev = do_pci_probe();
+	if (pdev == NULL)
+		return 1;
+
+	if (!atir_init_start())
+		return 1;
+
+	strcpy(atir_driver.name, "ATIR");
+	atir_driver.minor       = -1;
+	atir_driver.code_length = 8;
+	atir_driver.sample_rate = 10;
+	atir_driver.data        = 0;
+	atir_driver.add_to_buf  = atir_add_to_buf;
+	atir_driver.set_use_inc = atir_set_use_inc;
+	atir_driver.set_use_dec = atir_set_use_dec;
+	atir_driver.dev         = &pdev->dev;
+	atir_driver.owner       = THIS_MODULE;
+
+	atir_minor = lirc_register_driver(&atir_driver);
+	if (atir_minor < 0) {
+		printk(KERN_ERR DRIVER_NAME ": failed to register driver!\n");
+		return atir_minor;
+	}
+	dprintk("driver is registered on minor %d\n", atir_minor);
+
+	return 0;
+}
+
+
+void cleanup_module(void)
+{
+	lirc_unregister_driver(atir_minor);
+}
+
+
+static int atir_init_start(void)
+{
+	pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400);
+	if (pci_addr_lin == 0) {
+		printk(KERN_INFO DRIVER_NAME ": pci mem must be mapped\n");
+		return 0;
+	}
+	return 1;
+}
+
+static void cycle_delay(int cycle)
+{
+	udelay(WAIT_CYCLE*cycle);
+}
+
+
+static int poll_main()
+{
+	unsigned char status_high, status_low;
+
+	do_i2c_start();
+
+	seems_wr_byte(0xAA);
+	seems_wr_byte(0x01);
+
+	do_i2c_start();
+
+	seems_wr_byte(0xAB);
+
+	status_low = seems_rd_byte();
+	status_high = seems_rd_byte();
+
+	do_i2c_stop();
+
+	return (status_high << 8) | status_low;
+}
+
+static void do_i2c_start(void)
+{
+	do_set_bits(3);
+	cycle_delay(4);
+
+	do_set_bits(1);
+	cycle_delay(7);
+
+	do_set_bits(0);
+	cycle_delay(2);
+}
+
+static void do_i2c_stop(void)
+{
+	unsigned char bits;
+	bits =  do_get_bits() & 0xFD;
+	do_set_bits(bits);
+	cycle_delay(1);
+
+	bits |= 1;
+	do_set_bits(bits);
+	cycle_delay(2);
+
+	bits |= 2;
+	do_set_bits(bits);
+	bits = 3;
+	do_set_bits(bits);
+	cycle_delay(2);
+}
+
+static void seems_wr_byte(unsigned char value)
+{
+	int i;
+	unsigned char reg;
+
+	reg = do_get_bits();
+	for (i = 0; i < 8; i++) {
+		if (value & 0x80)
+			reg |= 0x02;
+		else
+			reg &= 0xFD;
+
+		do_set_bits(reg);
+		cycle_delay(1);
+
+		reg |= 1;
+		do_set_bits(reg);
+		cycle_delay(1);
+
+		reg &= 0xFE;
+		do_set_bits(reg);
+		cycle_delay(1);
+		value <<= 1;
+	}
+	cycle_delay(2);
+
+	reg |= 2;
+	do_set_bits(reg);
+
+	reg |= 1;
+	do_set_bits(reg);
+
+	cycle_delay(1);
+	do_get_bits();
+
+	reg &= 0xFE;
+	do_set_bits(reg);
+	cycle_delay(3);
+}
+
+static unsigned char seems_rd_byte(void)
+{
+	int i;
+	int rd_byte;
+	unsigned char bits_2, bits_1;
+
+	bits_1 = do_get_bits() | 2;
+	do_set_bits(bits_1);
+
+	rd_byte = 0;
+	for (i = 0; i < 8; i++) {
+		bits_1 &= 0xFE;
+		do_set_bits(bits_1);
+		cycle_delay(2);
+
+		bits_1 |= 1;
+		do_set_bits(bits_1);
+		cycle_delay(1);
+
+		bits_2 = do_get_bits();
+		if (bits_2 & 2)
+			rd_byte |= 1;
+
+		rd_byte <<= 1;
+	}
+
+	bits_1 = 0;
+	if (bits_2 == 0)
+		bits_1 |= 2;
+
+	do_set_bits(bits_1);
+	cycle_delay(2);
+
+	bits_1 |= 1;
+	do_set_bits(bits_1);
+	cycle_delay(3);
+
+	bits_1 &= 0xFE;
+	do_set_bits(bits_1);
+	cycle_delay(2);
+
+	rd_byte >>= 1;
+	rd_byte &= 0xFF;
+	return rd_byte;
+}
+
+static void do_set_bits(unsigned char new_bits)
+{
+	int reg_val;
+	reg_val = read_index(0x34);
+	if (new_bits & 2) {
+		reg_val &= 0xFFFFFFDF;
+		reg_val |= 1;
+	} else {
+		reg_val &= 0xFFFFFFFE;
+		reg_val |= 0x20;
+	}
+	reg_val |= 0x10;
+	write_index(0x34, reg_val);
+
+	reg_val = read_index(0x31);
+	if (new_bits & 1)
+		reg_val |= 0x1000000;
+	else
+		reg_val &= 0xFEFFFFFF;
+
+	reg_val |= 0x8000000;
+	write_index(0x31, reg_val);
+}
+
+static unsigned char do_get_bits(void)
+{
+	unsigned char bits;
+	int reg_val;
+
+	reg_val = read_index(0x34);
+	reg_val |= 0x10;
+	reg_val &= 0xFFFFFFDF;
+	write_index(0x34, reg_val);
+
+	reg_val = read_index(0x34);
+	bits = 0;
+	if (reg_val & 8)
+		bits |= 2;
+	else
+		bits &= 0xFD;
+
+	reg_val = read_index(0x31);
+	if (reg_val & 0x1000000)
+		bits |= 1;
+	else
+		bits &= 0xFE;
+
+	return bits;
+}
+
+static unsigned int read_index(unsigned char index)
+{
+	unsigned char *addr;
+	unsigned int value;
+	/*  addr = pci_addr_lin + DATA_PCI_OFF + ((index & 0xFF) << 2); */
+	addr = pci_addr_lin + ((index & 0xFF) << 2);
+	value = readl(addr);
+	return value;
+}
+
+static void write_index(unsigned char index, unsigned int reg_val)
+{
+	unsigned char *addr;
+	addr = pci_addr_lin + ((index & 0xFF) << 2);
+	writel(reg_val, addr);
+}
+
+MODULE_AUTHOR("Froenchenko Leonid");
+MODULE_DESCRIPTION("IR remote driver for bt829 based TV cards");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c
new file mode 100644
index 00000000000..a152c52b074
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.c
@@ -0,0 +1,646 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "lirc_ene0100.h"
+
+static int sample_period = 75;
+static int enable_idle = 1;
+static int enable_learning;
+
+static void ene_set_idle(struct ene_device *dev, int idle);
+static void ene_set_inputs(struct ene_device *dev, int enable);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	return inb(dev->hw_io + ENE_IO);
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	outb(value, dev->hw_io + ENE_IO);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+				  u16 reg, u8 value, u8 mask)
+{
+	u8 regvalue;
+
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+	regvalue |= (value & mask);
+	outb(regvalue, dev->hw_io + ENE_IO);
+}
+
+/* read irq status and ack it */
+static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
+{
+	u8 irq_status;
+	u8 fw_flags1, fw_flags2;
+
+	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+
+	if (buffer_pointer)
+		*buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
+
+	if (dev->hw_revision < ENE_HW_C) {
+		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+		if (!(irq_status & ENEB_IRQ_STATUS_IR))
+			return 0;
+		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+				 irq_status & ~ENEB_IRQ_STATUS_IR);
+
+		/* rev B support only recieving */
+		return ENE_IRQ_RX;
+	}
+
+	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+	if (!(irq_status & ENEC_IRQ_STATUS))
+		return 0;
+
+	/* original driver does that twice - a workaround ? */
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+	/* clear unknown flag in F8F9 */
+	if (fw_flags2 & ENE_FW2_IRQ_CLR)
+		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+	/* check if this is a TX interrupt */
+	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+
+	if (fw_flags1 & ENE_FW1_TXIRQ) {
+		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+		return ENE_IRQ_TX;
+	} else
+		return ENE_IRQ_RX;
+}
+
+static int ene_hw_detect(struct ene_device *dev)
+{
+	u8 chip_major, chip_minor;
+	u8 hw_revision, old_ver;
+	u8 tmp;
+	u8 fw_capabilities;
+
+	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+	if (hw_revision == 0xFF) {
+
+		ene_printk(KERN_WARNING, "device seems to be disabled\n");
+		ene_printk(KERN_WARNING,
+			"send a mail to lirc-list@lists.sourceforge.net\n");
+		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x33) {
+		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_C;
+		ene_printk(KERN_WARNING,
+		       "KB3926C detected, driver support is not complete!\n");
+
+	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_B;
+		ene_printk(KERN_NOTICE, "KB3926B detected\n");
+	} else {
+		dev->hw_revision = ENE_HW_D;
+		ene_printk(KERN_WARNING,
+			"unknown ENE chip detected, assuming KB3926D\n");
+		ene_printk(KERN_WARNING, "driver support incomplete");
+
+	}
+
+	ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
+		chip_major, chip_minor, old_ver, hw_revision);
+
+
+	/* detect features hardware supports */
+
+	if (dev->hw_revision < ENE_HW_C)
+		return 0;
+
+	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+
+	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+	    fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
+
+	ene_printk(KERN_NOTICE, "hardware features:\n");
+	ene_printk(KERN_NOTICE,
+		"learning and tx %s, gpio40_learn %s, fan_in %s\n",
+	       dev->hw_learning_and_tx_capable ? "on" : "off",
+	       dev->hw_gpio40_learning ? "on" : "off",
+	       dev->hw_fan_as_normal_input ? "on" : "off");
+
+	if (!dev->hw_learning_and_tx_capable && enable_learning)
+		enable_learning = 0;
+
+	if (dev->hw_learning_and_tx_capable) {
+		ene_printk(KERN_WARNING,
+		"Device supports transmitting, but the driver doesn't\n");
+		ene_printk(KERN_WARNING,
+		"due to lack of hardware to test against.\n");
+		ene_printk(KERN_WARNING,
+		"Send a mail to: lirc-list@lists.sourceforge.net\n");
+	}
+	return 0;
+}
+
+/* hardware initialization */
+static int ene_hw_init(void *data)
+{
+	u8 reg_value;
+	struct ene_device *dev = (struct ene_device *)data;
+	dev->in_use = 1;
+
+	if (dev->hw_revision < ENE_HW_C) {
+		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+	} else {
+		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+		reg_value |= ENEC_IRQ_UNK_EN;
+		reg_value &= ~ENEC_IRQ_STATUS;
+		reg_value |= (dev->irq & ENEC_IRQ_MASK);
+		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+	}
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+	ene_set_inputs(dev, enable_learning);
+
+	/* set sampling period */
+	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+	/* ack any pending irqs - just in case */
+	ene_hw_irq_status(dev, NULL);
+
+	/* enter idle mode */
+	ene_set_idle(dev, 1);
+
+	/* enable firmware bits */
+	ene_hw_write_reg_mask(dev, ENE_FW1,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
+	/* clear stats */
+	dev->sample = 0;
+	return 0;
+}
+
+/* this enables gpio40 signal, used if connected to wide band input*/
+static void ene_enable_gpio40(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
+			      0 : ENE_CIR_CONF2_GPIO40DIS,
+			      ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables the classic sampler */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
+}
+
+/* this enables recieve via fan input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+	if (!enable)
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+	else {
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+	}
+	dev->fan_input_inuse = enable;
+}
+
+/* determine which input to use*/
+static void ene_set_inputs(struct ene_device *dev, int learning_enable)
+{
+	ene_enable_normal_recieve(dev, 1);
+
+	/* old hardware doesn't support learning mode for sure */
+	if (dev->hw_revision <= ENE_HW_B)
+		return;
+
+	/* reciever not learning capable, still set gpio40 correctly */
+	if (!dev->hw_learning_and_tx_capable) {
+		ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+		return;
+	}
+
+	/* enable learning mode */
+	if (learning_enable) {
+		ene_enable_gpio40(dev, dev->hw_gpio40_learning);
+
+		/* fan input is not used for learning */
+		if (dev->hw_fan_as_normal_input)
+			ene_enable_fan_recieve(dev, 0);
+
+	/* disable learning mode */
+	} else {
+		if (dev->hw_fan_as_normal_input) {
+			ene_enable_fan_recieve(dev, 1);
+			ene_enable_normal_recieve(dev, 0);
+		} else
+			ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+	}
+
+	/* set few additional settings for this mode */
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
+			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
+			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* deinitialization */
+static void ene_hw_deinit(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+
+	/* disable samplers */
+	ene_enable_normal_recieve(dev, 0);
+
+	if (dev->hw_fan_as_normal_input)
+		ene_enable_fan_recieve(dev, 0);
+
+	/* disable hardware IRQ and firmware flag */
+	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	ene_set_idle(dev, 1);
+	dev->in_use = 0;
+}
+
+/*  sends current sample to userspace */
+static void send_sample(struct ene_device *dev)
+{
+	int value = abs(dev->sample) & PULSE_MASK;
+
+	if (dev->sample > 0)
+		value |= PULSE_BIT;
+
+	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
+		wake_up(&dev->lirc_driver->rbuf->wait_poll);
+	}
+	dev->sample = 0;
+}
+
+/*  this updates current sample */
+static void update_sample(struct ene_device *dev, int sample)
+{
+	if (!dev->sample)
+		dev->sample = sample;
+	else if (same_sign(dev->sample, sample))
+		dev->sample += sample;
+	else {
+		send_sample(dev);
+		dev->sample = sample;
+	}
+}
+
+/* enable or disable idle mode */
+static void ene_set_idle(struct ene_device *dev, int idle)
+{
+	struct timeval now;
+	int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+			      disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+			      ENE_CIR_SAMPLE_OVERFLOW);
+	dev->idle = idle;
+
+	/* remember when we have entered the idle mode */
+	if (idle) {
+		do_gettimeofday(&dev->gap_start);
+		return;
+	}
+
+	/* send the gap between keypresses now */
+	do_gettimeofday(&now);
+
+	if (now.tv_sec - dev->gap_start.tv_sec > 16)
+		dev->sample = space(PULSE_MASK);
+	else
+		dev->sample = dev->sample +
+		    space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
+		    + space(now.tv_usec - dev->gap_start.tv_usec);
+
+	if (abs(dev->sample) > PULSE_MASK)
+		dev->sample = space(PULSE_MASK);
+	send_sample(dev);
+}
+
+/* interrupt handler */
+static irqreturn_t ene_hw_irq(int irq, void *data)
+{
+	u16 hw_value;
+	int i, hw_sample;
+	int space;
+	int buffer_pointer;
+	int irq_status;
+
+	struct ene_device *dev = (struct ene_device *)data;
+	irq_status = ene_hw_irq_status(dev, &buffer_pointer);
+
+	if (!irq_status)
+		return IRQ_NONE;
+
+	/* TODO: only RX for now */
+	if (irq_status == ENE_IRQ_TX)
+		return IRQ_HANDLED;
+
+	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+
+		hw_value = ene_hw_read_reg(dev,
+				ENE_SAMPLE_BUFFER + buffer_pointer + i);
+
+		if (dev->fan_input_inuse) {
+			/* read high part of the sample */
+			hw_value |= ene_hw_read_reg(dev,
+			    ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
+
+			/* test for _space_ bit */
+			space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
+
+			/* clear space bit, and other unused bits */
+			hw_value &= ENE_FAN_VALUE_MASK;
+			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+		} else {
+			space = hw_value & ENE_SAMPLE_SPC_MASK;
+			hw_value &= ENE_SAMPLE_VALUE_MASK;
+			hw_sample = hw_value * sample_period;
+		}
+
+		/* no more data */
+		if (!(hw_value))
+			break;
+
+		if (space)
+			hw_sample *= -1;
+
+		/* overflow sample recieved, handle it */
+
+		if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
+
+			if (dev->idle)
+				continue;
+
+			if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
+				update_sample(dev, hw_sample);
+			else
+				ene_set_idle(dev, 1);
+
+			continue;
+		}
+
+		/* normal first sample recieved */
+		if (!dev->fan_input_inuse && dev->idle) {
+			ene_set_idle(dev, 0);
+
+			/* discard first recieved value, its random
+			   since its the time signal was off before
+			   first pulse if idle mode is enabled, HW
+			   does that for us */
+
+			if (!enable_idle)
+				continue;
+		}
+		update_sample(dev, hw_sample);
+		send_sample(dev);
+	}
+	return IRQ_HANDLED;
+}
+
+static int ene_probe(struct pnp_dev *pnp_dev,
+		     const struct pnp_device_id *dev_id)
+{
+	struct ene_device *dev;
+	struct lirc_driver *lirc_driver;
+	int error = -ENOMEM;
+
+	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+	if (!dev)
+		goto err1;
+
+	dev->pnp_dev = pnp_dev;
+	pnp_set_drvdata(pnp_dev, dev);
+
+
+	/* prepare lirc interface */
+	error = -ENOMEM;
+	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+	if (!lirc_driver)
+		goto err2;
+
+	dev->lirc_driver = lirc_driver;
+
+	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+	lirc_driver->minor = -1;
+	lirc_driver->code_length = sizeof(int) * 8;
+	lirc_driver->features = LIRC_CAN_REC_MODE2;
+	lirc_driver->data = dev;
+	lirc_driver->set_use_inc = ene_hw_init;
+	lirc_driver->set_use_dec = ene_hw_deinit;
+	lirc_driver->dev = &pnp_dev->dev;
+	lirc_driver->owner = THIS_MODULE;
+
+	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+	if (!lirc_driver->rbuf)
+		goto err3;
+
+	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
+		goto err4;
+
+	error = -ENODEV;
+	if (lirc_register_driver(lirc_driver))
+		goto err5;
+
+	/* validate resources */
+	if (!pnp_port_valid(pnp_dev, 0) ||
+	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+		goto err6;
+
+	if (!pnp_irq_valid(pnp_dev, 0))
+		goto err6;
+
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	dev->irq = pnp_irq(pnp_dev, 0);
+
+	/* claim the resources */
+	error = -EBUSY;
+	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+		goto err6;
+
+	if (request_irq(dev->irq, ene_hw_irq,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+		goto err7;
+
+	/* detect hardware version and features */
+	error = ene_hw_detect(dev);
+	if (error)
+		goto err8;
+
+	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+	return 0;
+
+err8:
+	free_irq(dev->irq, dev);
+err7:
+	release_region(dev->hw_io, ENE_MAX_IO);
+err6:
+	lirc_unregister_driver(lirc_driver->minor);
+err5:
+	lirc_buffer_free(lirc_driver->rbuf);
+err4:
+	kfree(lirc_driver->rbuf);
+err3:
+	kfree(lirc_driver);
+err2:
+	kfree(dev);
+err1:
+	return error;
+}
+
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_hw_deinit(dev);
+	free_irq(dev->irq, dev);
+	release_region(dev->hw_io, ENE_MAX_IO);
+	lirc_unregister_driver(dev->lirc_driver->minor);
+	lirc_buffer_free(dev->lirc_driver->rbuf);
+	kfree(dev->lirc_driver);
+	kfree(dev);
+}
+
+#ifdef CONFIG_PM
+
+/* TODO: make 'wake on IR' configurable and add .shutdown */
+/* currently impossible due to lack of kernel support */
+
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
+	return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	if (dev->in_use)
+		ene_hw_init(dev);
+
+	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
+	return 0;
+}
+
+#endif
+
+static const struct pnp_device_id ene_ids[] = {
+	{.id = "ENE0100",},
+	{},
+};
+
+static struct pnp_driver ene_driver = {
+	.name = ENE_DRIVER_NAME,
+	.id_table = ene_ids,
+	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+	.probe = ene_probe,
+	.remove = __devexit_p(ene_remove),
+
+#ifdef CONFIG_PM
+	.suspend = ene_suspend,
+	.resume = ene_resume,
+#endif
+};
+
+static int __init ene_init(void)
+{
+	if (sample_period < 5) {
+		ene_printk(KERN_ERR, "sample period must be at\n");
+		ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
+		return -EINVAL;
+	}
+	return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+	pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+	"Enables turning off signal sampling after long inactivity time; "
+	"if disabled might help detecting input signal (default: enabled)");
+
+module_param(enable_learning, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+    ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
new file mode 100644
index 00000000000..776b693bb30
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.h
@@ -0,0 +1,169 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS		0	 /* hardware status - unused */
+#define ENE_ADDR_HI		1	 /* hi byte of register address */
+#define ENE_ADDR_LO		2	 /* low byte of register address */
+#define ENE_IO			3	 /* read/write window */
+#define ENE_MAX_IO		4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER	0xF8F0	 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK	(1 << 7) /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK	0x7F
+#define ENE_SAMPLE_OVERFLOW	0x7F
+#define ENE_SAMPLES_SIZE	4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	 /* this buffer holds high byte of */
+					 /* each sample of normal buffer */
+
+#define ENE_FAN_SMPL_PULS_MSK	0x8000	 /* this bit of combined sample */
+					 /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK	0x0FFF   /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1			0xF8F8
+#define	ENE_FW1_ENABLE		(1 << 0) /* enable fw processing */
+#define ENE_FW1_TXIRQ		(1 << 1) /* TX interrupt pending */
+#define ENE_FW1_WAKE		(1 << 6) /* enable wake from S3 */
+#define ENE_FW1_IRQ		(1 << 7) /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2			0xF8F9
+#define ENE_FW2_BUF_HIGH	(1 << 0) /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR		(1 << 2) /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN	(1 << 4) /* normal input is used as */
+					 /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN	(1 << 6) /* fan is used as normal input */
+#define ENE_FW2_LEARNING	(1 << 7) /* hardware supports learning and TX */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1		0xFE30   /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31   /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+#define ENE_SAMPLE_PERIOD_FAN   61	 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	 /* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	 /* irq status */
+#define ENEB_IRQ_STATUS_IR	(1 << 5) /* IR irq */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ		0xFE9B	 /* new irq settings register */
+#define ENEC_IRQ_MASK		0x0F	 /* irq number mask */
+#define ENEC_IRQ_UNK_EN		(1 << 4) /* always enabled */
+#define ENEC_IRQ_STATUS		(1 << 5) /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1		0xFEC0
+#define ENE_CIR_CONF1_ADC_ON	0x7	 /* reciever on gpio40 enabled */
+#define ENE_CIR_CONF1_LEARN1	(1 << 3) /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON	0x30	 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR	(1 << 7) /* send TX carrier or not */
+
+#define ENE_CIR_CONF2		0xFEC1	 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2	(1 << 4) /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS	(1 << 5) /* disable normal input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW	(1 << 7) /* interrupt on overflows if set */
+
+
+/* transmitter - not implemented yet */
+/* KB3926C and higher */
+/* transmission is very similiar to recieving, a byte is written to */
+/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
+/* sample period is fixed*/
+
+
+/* transmitter ports */
+#define ENE_TX_PORT1		0xFC01	 /* this enables one or both */
+#define ENE_TX_PORT1_EN		(1 << 5) /* TX ports */
+#define ENE_TX_PORT2		0xFC08
+#define ENE_TX_PORT2_EN		(1 << 1)
+
+#define ENE_TX_INPUT		0xFEC9	 /* next byte to transmit */
+#define ENE_TX_SPC_MASK		(1 << 7) /* Transmitted sample is space */
+#define ENE_TX_UNK1		0xFECB	 /* set to 0x63 */
+#define ENE_TX_SMPL_PERIOD	50	 /* transmit sample period */
+
+
+#define ENE_TX_CARRIER		0xFECE	 /* TX carrier * 2 (khz) */
+#define ENE_TX_CARRIER_UNKBIT	0x80	 /* This bit set on transmit */
+#define ENE_TX_CARRIER_LOW	0xFECF	 /* TX carrier / 2 */
+
+/* Hardware versions */
+#define ENE_HW_VERSION		0xFF00	 /* hardware revision */
+#define ENE_HW_UNK		0xFF1D
+#define ENE_HW_UNK_CLR		(1 << 2)
+#define ENE_HW_VER_MAJOR	0xFF1E	 /* chip version */
+#define ENE_HW_VER_MINOR	0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
+
+#define ENE_DRIVER_NAME		"enecir"
+#define ENE_MAXGAP		250000	 /* this is amount of time we wait
+					 before turning the sampler, chosen
+					 arbitry */
+
+#define space(len)	       (-(len))	 /* add a space */
+
+/* software defines */
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct lirc_driver *lirc_driver;
+
+	/* hw settings */
+	unsigned long hw_io;
+	int irq;
+
+	int hw_revision;			/* hardware revision */
+	int hw_learning_and_tx_capable;		/* learning capable */
+	int hw_gpio40_learning;			/* gpio40 is learning */
+	int hw_fan_as_normal_input;	/* fan input is used as regular input */
+
+	/* device data */
+	int idle;
+	int fan_input_inuse;
+
+	int sample;
+	int in_use;
+
+	struct timeval gap_start;
+};
diff --git a/drivers/staging/lirc/lirc_i2c.c b/drivers/staging/lirc/lirc_i2c.c
new file mode 100644
index 00000000000..6df2c0e8d72
--- /dev/null
+++ b/drivers/staging/lirc/lirc_i2c.c
@@ -0,0 +1,536 @@
+/*
+ * lirc_i2c.c
+ *
+ * i2c IR driver for the onboard IR port on many TV tuner cards, including:
+ *  -Flavors of the Hauppauge PVR-150/250/350
+ *  -Hauppauge HVR-1300
+ *  -PixelView (BT878P+W/FM)
+ *  -KNC ONE TV Station/Anubis Typhoon TView Tuner
+ *  -Asus TV-Box and Creative/VisionTek BreakOut-Box
+ *  -Leadtek Winfast PVR2000
+ *
+ * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ * modified for PixelView (BT878P+W/FM) by
+ *      Michal Kochanowicz <mkochano@pld.org.pl>
+ *      Christoph Bartelmus <lirc@bartelmus.de>
+ * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
+ *      Ulrich Mueller <ulrich.mueller42@web.de>
+ * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
+ *      Stefan Jahn <stefan@lkcc.org>
+ * modified for inclusion into kernel sources by
+ *      Jerome Brock <jbrock@users.sourceforge.net>
+ * modified for Leadtek Winfast PVR2000 by
+ *      Thomas Reitmayr (treitmayr@yahoo.com)
+ * modified for Hauppauge HVR-1300 by
+ *      Jan Frey (jfrey@gmx.de)
+ *
+ * parts are cut&pasted from the old lirc_haup.c driver
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <media/lirc_dev.h>
+
+struct IR {
+	struct lirc_driver l;
+	struct i2c_client  c;
+	int nextkey;
+	unsigned char b[3];
+	unsigned char bits;
+	unsigned char flag;
+};
+
+#define DEVICE_NAME "lirc_i2c"
+
+/* module parameters */
+static int debug;	/* debug output */
+static int minor = -1;	/* minor number */
+
+#define dprintk(fmt, args...)						\
+	do {								\
+		if (debug)						\
+			printk(KERN_DEBUG DEVICE_NAME ": " fmt,		\
+			       ## args);				\
+	} while (0)
+
+static int reverse(int data, int bits)
+{
+	int i;
+	int c;
+
+	for (c = 0, i = 0; i < bits; i++)
+		c |= ((data & (1<<i)) ? 1 : 0) << (bits-1-i);
+
+	return c;
+}
+
+static int add_to_buf_adap(void *data, struct lirc_buffer *buf)
+{
+	struct IR *ir = data;
+	unsigned char keybuf[4];
+
+	keybuf[0] = 0x00;
+	i2c_master_send(&ir->c, keybuf, 1);
+	/* poll IR chip */
+	if (i2c_master_recv(&ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
+		dprintk("read error\n");
+		return -EIO;
+	}
+
+	dprintk("key (0x%02x%02x%02x%02x)\n",
+		keybuf[0], keybuf[1], keybuf[2], keybuf[3]);
+
+	/* key pressed ? */
+	if (keybuf[2] == 0xff)
+		return -ENODATA;
+
+	/* remove repeat bit */
+	keybuf[2] &= 0x7f;
+	keybuf[3] |= 0x80;
+
+	lirc_buffer_write(buf, keybuf);
+	return 0;
+}
+
+static int add_to_buf_pcf8574(void *data, struct lirc_buffer *buf)
+{
+	struct IR *ir = data;
+	int rc;
+	unsigned char all, mask;
+	unsigned char key;
+
+	/* compute all valid bits (key code + pressed/release flag) */
+	all = ir->bits | ir->flag;
+
+	/* save IR writable mask bits */
+	mask = i2c_smbus_read_byte(&ir->c) & ~all;
+
+	/* send bit mask */
+	rc = i2c_smbus_write_byte(&ir->c, (0xff & all) | mask);
+
+	/* receive scan code */
+	rc = i2c_smbus_read_byte(&ir->c);
+
+	if (rc == -1) {
+		dprintk("%s read error\n", ir->c.name);
+		return -EIO;
+	}
+
+	/* drop duplicate polls */
+	if (ir->b[0] == (rc & all))
+		return -ENODATA;
+
+	ir->b[0] = rc & all;
+
+	dprintk("%s key 0x%02X %s\n", ir->c.name, rc & ir->bits,
+		(rc & ir->flag) ? "released" : "pressed");
+
+	/* ignore released buttons */
+	if (rc & ir->flag)
+		return -ENODATA;
+
+	/* set valid key code */
+	key  = rc & ir->bits;
+	lirc_buffer_write(buf, &key);
+	return 0;
+}
+
+/* common for Hauppauge IR receivers */
+static int add_to_buf_haup_common(void *data, struct lirc_buffer *buf,
+		unsigned char *keybuf, int size, int offset)
+{
+	struct IR *ir = data;
+	__u16 code;
+	unsigned char codes[2];
+	int ret;
+
+	/* poll IR chip */
+	ret = i2c_master_recv(&ir->c, keybuf, size);
+	if (ret == size) {
+		ir->b[0] = keybuf[offset];
+		ir->b[1] = keybuf[offset+1];
+		ir->b[2] = keybuf[offset+2];
+		if (ir->b[0] != 0x00 && ir->b[1] != 0x00)
+			dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]);
+	} else {
+		dprintk("read error (ret=%d)\n", ret);
+		/* keep last successful read buffer */
+	}
+
+	/* key pressed ? */
+	if ((ir->b[0] & 0x80) == 0)
+		return -ENODATA;
+
+	/* look what we have */
+	code = (((__u16)ir->b[0]&0x7f)<<6) | (ir->b[1]>>2);
+
+	codes[0] = (code >> 8) & 0xff;
+	codes[1] = code & 0xff;
+
+	/* return it */
+	dprintk("sending code 0x%02x%02x to lirc\n", codes[0], codes[1]);
+	lirc_buffer_write(buf, codes);
+	return 0;
+}
+
+/* specific for the Hauppauge PVR150 IR receiver */
+static int add_to_buf_haup_pvr150(void *data, struct lirc_buffer *buf)
+{
+	unsigned char keybuf[6];
+	/* fetch 6 bytes, first relevant is at offset 3 */
+	return add_to_buf_haup_common(data, buf, keybuf, 6, 3);
+}
+
+/* used for all Hauppauge IR receivers but the PVR150 */
+static int add_to_buf_haup(void *data, struct lirc_buffer *buf)
+{
+	unsigned char keybuf[3];
+	/* fetch 3 bytes, first relevant is at offset 0 */
+	return add_to_buf_haup_common(data, buf, keybuf, 3, 0);
+}
+
+
+static int add_to_buf_pvr2000(void *data, struct lirc_buffer *buf)
+{
+	struct IR *ir = data;
+	unsigned char key;
+	s32 flags;
+	s32 code;
+
+	/* poll IR chip */
+	flags = i2c_smbus_read_byte_data(&ir->c, 0x10);
+	if (-1 == flags) {
+		dprintk("read error\n");
+		return -ENODATA;
+	}
+	/* key pressed ? */
+	if (0 == (flags & 0x80))
+		return -ENODATA;
+
+	/* read actual key code */
+	code = i2c_smbus_read_byte_data(&ir->c, 0x00);
+	if (-1 == code) {
+		dprintk("read error\n");
+		return -ENODATA;
+	}
+
+	key = code & 0xFF;
+
+	dprintk("IR Key/Flags: (0x%02x/0x%02x)\n", key, flags & 0xFF);
+
+	/* return it */
+	lirc_buffer_write(buf, &key);
+	return 0;
+}
+
+static int add_to_buf_pixelview(void *data, struct lirc_buffer *buf)
+{
+	struct IR *ir = data;
+	unsigned char key;
+
+	/* poll IR chip */
+	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+		dprintk("read error\n");
+		return -1;
+	}
+	dprintk("key %02x\n", key);
+
+	/* return it */
+	lirc_buffer_write(buf, &key);
+	return 0;
+}
+
+static int add_to_buf_pv951(void *data, struct lirc_buffer *buf)
+{
+	struct IR *ir = data;
+	unsigned char key;
+	unsigned char codes[4];
+
+	/* poll IR chip */
+	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+		dprintk("read error\n");
+		return -ENODATA;
+	}
+	/* ignore 0xaa */
+	if (key == 0xaa)
+		return -ENODATA;
+	dprintk("key %02x\n", key);
+
+	codes[0] = 0x61;
+	codes[1] = 0xD6;
+	codes[2] = reverse(key, 8);
+	codes[3] = (~codes[2])&0xff;
+
+	lirc_buffer_write(buf, codes);
+	return 0;
+}
+
+static int add_to_buf_knc1(void *data, struct lirc_buffer *buf)
+{
+	static unsigned char last_key = 0xFF;
+	struct IR *ir = data;
+	unsigned char key;
+
+	/* poll IR chip */
+	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
+		dprintk("read error\n");
+		return -ENODATA;
+	}
+
+	/*
+	 * it seems that 0xFE indicates that a button is still held
+	 * down, while 0xFF indicates that no button is held
+	 * down. 0xFE sequences are sometimes interrupted by 0xFF
+	 */
+
+	dprintk("key %02x\n", key);
+
+	if (key == 0xFF)
+		return -ENODATA;
+
+	if (key == 0xFE)
+		key = last_key;
+
+	last_key = key;
+	lirc_buffer_write(buf, &key);
+
+	return 0;
+}
+
+static int set_use_inc(void *data)
+{
+	struct IR *ir = data;
+
+	dprintk("%s called\n", __func__);
+
+	/* lock bttv in memory while /dev/lirc is in use  */
+	i2c_use_client(&ir->c);
+
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{
+	struct IR *ir = data;
+
+	dprintk("%s called\n", __func__);
+
+	i2c_release_client(&ir->c);
+}
+
+static struct lirc_driver lirc_template = {
+	.name		= "lirc_i2c",
+	.set_use_inc	= set_use_inc,
+	.set_use_dec	= set_use_dec,
+	.dev		= NULL,
+	.owner		= THIS_MODULE,
+};
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
+static int ir_remove(struct i2c_client *client);
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
+
+static const struct i2c_device_id ir_receiver_id[] = {
+	/* Generic entry for any IR receiver */
+	{ "ir_video", 0 },
+	/* IR device specific entries could be added here */
+	{ }
+};
+
+static struct i2c_driver driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "i2c ir driver",
+	},
+	.probe		= ir_probe,
+	.remove		= ir_remove,
+	.id_table	= ir_receiver_id,
+	.command	= ir_command,
+};
+
+static void pcf_probe(struct i2c_client *client, struct IR *ir)
+{
+	int ret1, ret2, ret3, ret4;
+
+	ret1 = i2c_smbus_write_byte(client, 0xff);
+	ret2 = i2c_smbus_read_byte(client);
+	ret3 = i2c_smbus_write_byte(client, 0x00);
+	ret4 = i2c_smbus_read_byte(client);
+
+	/* in the Asus TV-Box: bit 1-0 */
+	if (((ret2 & 0x03) == 0x03) && ((ret4 & 0x03) == 0x00)) {
+		ir->bits = (unsigned char) ~0x07;
+		ir->flag = 0x04;
+	/* in the Creative/VisionTek BreakOut-Box: bit 7-6 */
+	} else if (((ret2 & 0xc0) == 0xc0) && ((ret4 & 0xc0) == 0x00)) {
+		ir->bits = (unsigned char) ~0xe0;
+		ir->flag = 0x20;
+	}
+
+	return;
+}
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct IR *ir;
+	struct i2c_adapter *adap = client->adapter;
+	unsigned short addr = client->addr;
+	int retval;
+
+	ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
+	memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
+	memcpy(&ir->c, client, sizeof(struct i2c_client));
+
+	i2c_set_clientdata(client, ir);
+	ir->l.data    = ir;
+	ir->l.minor   = minor;
+	ir->l.sample_rate = 10;
+	ir->l.dev     = &ir->c.dev;
+	ir->nextkey   = -1;
+
+	switch (addr) {
+	case 0x64:
+		strlcpy(ir->c.name, "Pixelview IR", I2C_NAME_SIZE);
+		ir->l.code_length = 8;
+		ir->l.add_to_buf = add_to_buf_pixelview;
+		break;
+	case 0x4b:
+		strlcpy(ir->c.name, "PV951 IR", I2C_NAME_SIZE);
+		ir->l.code_length = 32;
+		ir->l.add_to_buf = add_to_buf_pv951;
+		break;
+	case 0x71:
+		if (adap->id == I2C_HW_B_CX2388x)
+			strlcpy(ir->c.name, "Hauppauge HVR1300", I2C_NAME_SIZE);
+		else /* bt8xx or cx2341x */
+			/*
+			 * The PVR150 IR receiver uses the same protocol as
+			 * other Hauppauge cards, but the data flow is
+			 * different, so we need to deal with it by its own.
+			 */
+			strlcpy(ir->c.name, "Hauppauge PVR150", I2C_NAME_SIZE);
+		ir->l.code_length = 13;
+		ir->l.add_to_buf = add_to_buf_haup_pvr150;
+		break;
+	case 0x6b:
+		strlcpy(ir->c.name, "Adaptec IR", I2C_NAME_SIZE);
+		ir->l.code_length = 32;
+		ir->l.add_to_buf = add_to_buf_adap;
+		break;
+	case 0x18:
+	case 0x1a:
+		if (adap->id == I2C_HW_B_CX2388x) {
+			strlcpy(ir->c.name, "Leadtek IR", I2C_NAME_SIZE);
+			ir->l.code_length = 8;
+			ir->l.add_to_buf = add_to_buf_pvr2000;
+		} else { /* bt8xx or cx2341x */
+			strlcpy(ir->c.name, "Hauppauge IR", I2C_NAME_SIZE);
+			ir->l.code_length = 13;
+			ir->l.add_to_buf = add_to_buf_haup;
+		}
+		break;
+	case 0x30:
+		strlcpy(ir->c.name, "KNC ONE IR", I2C_NAME_SIZE);
+		ir->l.code_length = 8;
+		ir->l.add_to_buf = add_to_buf_knc1;
+		break;
+	case 0x21:
+	case 0x23:
+		pcf_probe(client, ir);
+		strlcpy(ir->c.name, "TV-Box IR", I2C_NAME_SIZE);
+		ir->l.code_length = 8;
+		ir->l.add_to_buf = add_to_buf_pcf8574;
+		break;
+	default:
+		/* shouldn't happen */
+		printk("lirc_i2c: Huh? unknown i2c address (0x%02x)?\n", addr);
+		kfree(ir);
+		return -EINVAL;
+	}
+	printk(KERN_INFO "lirc_i2c: chip 0x%x found @ 0x%02x (%s)\n",
+	       adap->id, addr, ir->c.name);
+
+	retval = lirc_register_driver(&ir->l);
+
+	if (retval < 0) {
+		printk(KERN_ERR "lirc_i2c: failed to register driver!\n");
+		kfree(ir);
+		return retval;
+	}
+
+	ir->l.minor = retval;
+
+	return 0;
+}
+
+static int ir_remove(struct i2c_client *client)
+{
+	struct IR *ir = i2c_get_clientdata(client);
+
+	/* unregister device */
+	lirc_unregister_driver(ir->l.minor);
+
+	/* free memory */
+	kfree(ir);
+	return 0;
+}
+
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	/* nothing */
+	return 0;
+}
+
+static int __init lirc_i2c_init(void)
+{
+	i2c_add_driver(&driver);
+	return 0;
+}
+
+static void __exit lirc_i2c_exit(void)
+{
+	i2c_del_driver(&driver);
+}
+
+MODULE_DESCRIPTION("Infrared receiver driver for Hauppauge and "
+		   "Pixelview cards (i2c stack)");
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
+	      "Ulrich Mueller, Stefan Jahn, Jerome Brock");
+MODULE_LICENSE("GPL");
+
+module_param(minor, int, S_IRUGO);
+MODULE_PARM_DESC(minor, "Preferred minor device number");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_init(lirc_i2c_init);
+module_exit(lirc_i2c_exit);
diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/lirc/lirc_igorplugusb.c
new file mode 100644
index 00000000000..bce600ede26
--- /dev/null
+++ b/drivers/staging/lirc/lirc_igorplugusb.c
@@ -0,0 +1,555 @@
+/*
+ * lirc_igorplugusb - USB remote support for LIRC
+ *
+ * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware.
+ * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm
+ *
+ * The device can only record bursts of up to 36 pulses/spaces.
+ * Works fine with RC5. Longer commands lead to device buffer overrun.
+ * (Maybe a better firmware or a microcontroller with more ram can help?)
+ *
+ * Version 0.1  [beta status]
+ *
+ * Copyright (C) 2004 Jan M. Hochstein
+ *	<hochstein@algo.informatik.tu-darmstadt.de>
+ *
+ * This driver was derived from:
+ *   Paul Miller <pmiller9@users.sourceforge.net>
+ *      "lirc_atiusb" module
+ *   Vladimir Dergachev <volodya@minspring.com>'s 2002
+ *      "USB ATI Remote support" (input device)
+ *   Adrian Dewhurst <sailor-lk@sailorfrag.net>'s 2002
+ *      "USB StreamZap remote driver" (LIRC)
+ *   Artur Lipowski <alipowski@kki.net.pl>'s 2002
+ *      "lirc_dev" and "lirc_gpio" LIRC modules
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/usb.h>
+#include <linux/time.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+/* module identification */
+#define DRIVER_VERSION		"0.1"
+#define DRIVER_AUTHOR		\
+	"Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>"
+#define DRIVER_DESC		"USB remote driver for LIRC"
+#define DRIVER_NAME		"lirc_igorplugusb"
+
+/* debugging support */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define dprintk(fmt, args...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG fmt, ## args);	\
+	} while (0)
+
+/* One mode2 pulse/space has 4 bytes. */
+#define CODE_LENGTH	     sizeof(int)
+
+/* Igor's firmware cannot record bursts longer than 36. */
+#define DEVICE_BUFLEN	   36
+
+/*
+ * Header at the beginning of the device's buffer:
+ *	unsigned char data_length
+ *	unsigned char data_start    (!=0 means ring-buffer overrun)
+ *	unsigned char counter       (incremented by each burst)
+ */
+#define DEVICE_HEADERLEN	3
+
+/* This is for the gap */
+#define ADDITIONAL_LIRC_BYTES   2
+
+/* times to poll per second */
+#define SAMPLE_RATE	     100
+static int sample_rate = SAMPLE_RATE;
+
+
+/**** Igor's USB Request Codes */
+
+#define SET_INFRABUFFER_EMPTY   1
+/**
+ * Params: none
+ * Answer: empty
+ */
+
+#define GET_INFRACODE	   2
+/**
+ * Params:
+ *   wValue: offset to begin reading infra buffer
+ *
+ * Answer: infra data
+ */
+
+#define SET_DATAPORT_DIRECTION  3
+/**
+ * Params:
+ *   wValue: (byte) 1 bit for each data port pin (0=in, 1=out)
+ *
+ * Answer: empty
+ */
+
+#define GET_DATAPORT_DIRECTION  4
+/**
+ * Params: none
+ *
+ * Answer: (byte) 1 bit for each data port pin (0=in, 1=out)
+ */
+
+#define SET_OUT_DATAPORT	5
+/**
+ * Params:
+ *   wValue: byte to write to output data port
+ *
+ * Answer: empty
+ */
+
+#define GET_OUT_DATAPORT	6
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from output data port
+ */
+
+#define GET_IN_DATAPORT	 7
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from input data port
+ */
+
+#define READ_EEPROM	     8
+/**
+ * Params:
+ *   wValue: offset to begin reading EEPROM
+ *
+ * Answer: EEPROM bytes
+ */
+
+#define WRITE_EEPROM	    9
+/**
+ * Params:
+ *   wValue: offset to EEPROM byte
+ *   wIndex: byte to write
+ *
+ * Answer: empty
+ */
+
+#define SEND_RS232	      10
+/**
+ * Params:
+ *   wValue: byte to send
+ *
+ * Answer: empty
+ */
+
+#define RECV_RS232	      11
+/**
+ * Params: none
+ *
+ * Answer: byte received
+ */
+
+#define SET_RS232_BAUD	  12
+/**
+ * Params:
+ *   wValue: byte to write to UART bit rate register (UBRR)
+ *
+ * Answer: empty
+ */
+
+#define GET_RS232_BAUD	  13
+/**
+ * Params: none
+ *
+ * Answer: byte read from UART bit rate register (UBRR)
+ */
+
+
+/* data structure for each usb remote */
+struct igorplug {
+
+	/* usb */
+	struct usb_device *usbdev;
+	struct urb *urb_in;
+	int devnum;
+
+	unsigned char *buf_in;
+	unsigned int len_in;
+	int in_space;
+	struct timeval last_time;
+
+	dma_addr_t dma_in;
+
+	/* lirc */
+	struct lirc_driver *d;
+
+	/* handle sending (init strings) */
+	int send_flags;
+	wait_queue_head_t wait_out;
+};
+
+static int unregister_from_lirc(struct igorplug *ir)
+{
+	struct lirc_driver *d = ir->d;
+	int devnum;
+
+	if (!ir->d)
+		return -EINVAL;
+
+	devnum = ir->devnum;
+	dprintk(DRIVER_NAME "[%d]: unregister from lirc called\n", devnum);
+
+	lirc_unregister_driver(d->minor);
+
+	printk(DRIVER_NAME "[%d]: usb remote disconnected\n", devnum);
+
+	kfree(d);
+	ir->d = NULL;
+	kfree(ir);
+	return 0;
+}
+
+static int set_use_inc(void *data)
+{
+	struct igorplug *ir = data;
+
+	if (!ir) {
+		printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
+		return -EIO;
+	}
+	dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum);
+
+	if (!ir->usbdev)
+		return -ENODEV;
+
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{
+	struct igorplug *ir = data;
+
+	if (!ir) {
+		printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
+		return;
+	}
+	dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum);
+}
+
+
+/**
+ * Called in user context.
+ * return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ */
+static int usb_remote_poll(void *data, struct lirc_buffer *buf)
+{
+	int ret;
+	struct igorplug *ir = (struct igorplug *)data;
+
+	if (!ir->usbdev)  /* Has the device been removed? */
+		return -ENODEV;
+
+	memset(ir->buf_in, 0, ir->len_in);
+
+	ret = usb_control_msg(
+	      ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+	      GET_INFRACODE, USB_TYPE_VENDOR|USB_DIR_IN,
+	      0/* offset */, /*unused*/0,
+	      ir->buf_in, ir->len_in,
+	      /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+	if (ret > 0) {
+		int i = DEVICE_HEADERLEN;
+		int code, timediff;
+		struct timeval now;
+
+		if (ret <= 1)  /* ACK packet has 1 byte --> ignore */
+			return -ENODATA;
+
+		dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n",
+			ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]);
+
+		if (ir->buf_in[2] != 0) {
+			printk(DRIVER_NAME "[%d]: Device buffer overrun.\n",
+				ir->devnum);
+			/* start at earliest byte */
+			i = DEVICE_HEADERLEN + ir->buf_in[2];
+			/* where are we now? space, gap or pulse? */
+		}
+
+		do_gettimeofday(&now);
+		timediff = now.tv_sec - ir->last_time.tv_sec;
+		if (timediff + 1 > PULSE_MASK / 1000000)
+			timediff = PULSE_MASK;
+		else {
+			timediff *= 1000000;
+			timediff += now.tv_usec - ir->last_time.tv_usec;
+		}
+		ir->last_time.tv_sec = now.tv_sec;
+		ir->last_time.tv_usec = now.tv_usec;
+
+		/* create leading gap  */
+		code = timediff;
+		lirc_buffer_write(buf, (unsigned char *)&code);
+		ir->in_space = 1;   /* next comes a pulse */
+
+		/* MODE2: pulse/space (PULSE_BIT) in 1us units */
+
+		while (i < ret) {
+			/* 1 Igor-tick = 85.333333 us */
+			code = (unsigned int)ir->buf_in[i] * 85
+				+ (unsigned int)ir->buf_in[i] / 3;
+			if (ir->in_space)
+				code |= PULSE_BIT;
+			lirc_buffer_write(buf, (unsigned char *)&code);
+			/* 1 chunk = CODE_LENGTH bytes */
+			ir->in_space ^= 1;
+			++i;
+		}
+
+		ret = usb_control_msg(
+		      ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+		      SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+		      /*unused*/0, /*unused*/0,
+		      /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+		      /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+		if (ret < 0)
+			printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: "
+			       "error %d\n", ir->devnum, ret);
+		return 0;
+	} else if (ret < 0)
+		printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n",
+			ir->devnum, ret);
+
+	return -ENODATA;
+}
+
+
+
+static int usb_remote_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = NULL;
+	struct usb_host_interface *idesc = NULL;
+	struct usb_host_endpoint *ep_ctl2;
+	struct igorplug *ir = NULL;
+	struct lirc_driver *driver = NULL;
+	int devnum, pipe, maxp;
+	int minor = 0;
+	char buf[63], name[128] = "";
+	int mem_failure = 0;
+	int ret;
+
+	dprintk(DRIVER_NAME ": usb probe called.\n");
+
+	dev = interface_to_usbdev(intf);
+
+	idesc = intf->cur_altsetting;
+
+	if (idesc->desc.bNumEndpoints != 1)
+		return -ENODEV;
+	ep_ctl2 = idesc->endpoint;
+	if (((ep_ctl2->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	    != USB_DIR_IN)
+	    || (ep_ctl2->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	    != USB_ENDPOINT_XFER_CONTROL)
+		return -ENODEV;
+	pipe = usb_rcvctrlpipe(dev, ep_ctl2->desc.bEndpointAddress);
+	devnum = dev->devnum;
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	dprintk(DRIVER_NAME "[%d]: bytes_in_key=%lu maxp=%d\n",
+		devnum, CODE_LENGTH, maxp);
+
+
+	mem_failure = 0;
+	ir = kzalloc(sizeof(struct igorplug), GFP_KERNEL);
+	if (!ir) {
+		mem_failure = 1;
+		goto mem_failure_switch;
+	}
+	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!driver) {
+		mem_failure = 2;
+		goto mem_failure_switch;
+	}
+
+	ir->buf_in = usb_alloc_coherent(dev,
+			      DEVICE_BUFLEN+DEVICE_HEADERLEN,
+			      GFP_ATOMIC, &ir->dma_in);
+	if (!ir->buf_in) {
+		mem_failure = 3;
+		goto mem_failure_switch;
+	}
+
+	strcpy(driver->name, DRIVER_NAME " ");
+	driver->minor = -1;
+	driver->code_length = CODE_LENGTH * 8; /* in bits */
+	driver->features = LIRC_CAN_REC_MODE2;
+	driver->data = ir;
+	driver->chunk_size = CODE_LENGTH;
+	driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES;
+	driver->set_use_inc = &set_use_inc;
+	driver->set_use_dec = &set_use_dec;
+	driver->sample_rate = sample_rate;    /* per second */
+	driver->add_to_buf = &usb_remote_poll;
+	driver->dev = &intf->dev;
+	driver->owner = THIS_MODULE;
+
+	init_waitqueue_head(&ir->wait_out);
+
+	minor = lirc_register_driver(driver);
+	if (minor < 0)
+		mem_failure = 9;
+
+mem_failure_switch:
+
+	switch (mem_failure) {
+	case 9:
+		usb_free_coherent(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN,
+			ir->buf_in, ir->dma_in);
+	case 3:
+		kfree(driver);
+	case 2:
+		kfree(ir);
+	case 1:
+		printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
+			devnum, mem_failure);
+		return -ENOMEM;
+	}
+
+	driver->minor = minor;
+	ir->d = driver;
+	ir->devnum = devnum;
+	ir->usbdev = dev;
+	ir->len_in = DEVICE_BUFLEN+DEVICE_HEADERLEN;
+	ir->in_space = 1; /* First mode2 event is a space. */
+	do_gettimeofday(&ir->last_time);
+
+	if (dev->descriptor.iManufacturer
+	    && usb_string(dev, dev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+	if (dev->descriptor.iProduct
+	    && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+	printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
+	       dev->bus->busnum, devnum);
+
+	/* clear device buffer */
+	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+		SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+		/*unused*/0, /*unused*/0,
+		/*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+		/*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+	if (ret < 0)
+		printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
+			devnum, ret);
+
+	usb_set_intfdata(intf, ir);
+	return 0;
+}
+
+
+static void usb_remote_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct igorplug *ir = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+
+	if (!ir || !ir->d)
+		return;
+
+	ir->usbdev = NULL;
+	wake_up_all(&ir->wait_out);
+
+	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+	unregister_from_lirc(ir);
+}
+
+static struct usb_device_id usb_remote_id_table[] = {
+	/* Igor Plug USB (Atmel's Manufact. ID) */
+	{ USB_DEVICE(0x03eb, 0x0002) },
+
+	/* Terminating entry */
+	{ }
+};
+
+static struct usb_driver usb_remote_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	usb_remote_probe,
+	.disconnect =	usb_remote_disconnect,
+	.id_table =	usb_remote_id_table
+};
+
+static int __init usb_remote_init(void)
+{
+	int i;
+
+	printk(KERN_INFO "\n"
+	       DRIVER_NAME ": " DRIVER_DESC " v" DRIVER_VERSION "\n");
+	printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+	dprintk(DRIVER_NAME ": debug mode enabled\n");
+
+	i = usb_register(&usb_remote_driver);
+	if (i < 0) {
+		printk(DRIVER_NAME ": usb register failed, result = %d\n", i);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit usb_remote_exit(void)
+{
+	usb_deregister(&usb_remote_driver);
+}
+
+module_init(usb_remote_init);
+module_exit(usb_remote_exit);
+
+#include <linux/vermagic.h>
+MODULE_INFO(vermagic, VERMAGIC_STRING);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, usb_remote_id_table);
+
+module_param(sample_rate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)");
+
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
new file mode 100644
index 00000000000..66493253042
--- /dev/null
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -0,0 +1,1058 @@
+/*
+ *   lirc_imon.c:  LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD
+ *		   including the iMON PAD model
+ *
+ *   Copyright(C) 2004  Venky Raju(dev@venky.ws)
+ *   Copyright(C) 2009  Jarod Wilson <jarod@wilsonet.com>
+ *
+ *   lirc_imon is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+#define MOD_AUTHOR	"Venky Raju <dev@venky.ws>"
+#define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME	"lirc_imon"
+#define MOD_VERSION	"0.8"
+
+#define DISPLAY_MINOR_BASE	144
+#define DEVICE_NAME	"lcd%d"
+
+#define BUF_CHUNK_SIZE	4
+#define BUF_SIZE	128
+
+#define BIT_DURATION	250	/* each bit received is 250us */
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos);
+
+/* LIRC driver function prototypes */
+static int ir_open(void *data);
+static void ir_close(void *data);
+
+/* Driver init/exit prototypes */
+static int __init imon_init(void);
+static void __exit imon_exit(void);
+
+/*** G L O B A L S ***/
+#define IMON_DATA_BUF_SZ	35
+
+struct imon_context {
+	struct usb_device *usbdev;
+	/* Newer devices have two interfaces */
+	int display;			/* not all controllers do */
+	int display_isopen;		/* display port has been opened */
+	int ir_isopen;			/* IR port open	*/
+	int dev_present;		/* USB device presence */
+	struct mutex ctx_lock;		/* to lock this object */
+	wait_queue_head_t remove_ok;	/* For unexpected USB disconnects */
+
+	int vfd_proto_6p;		/* some VFD require a 6th packet */
+
+	struct lirc_driver *driver;
+	struct usb_endpoint_descriptor *rx_endpoint;
+	struct usb_endpoint_descriptor *tx_endpoint;
+	struct urb *rx_urb;
+	struct urb *tx_urb;
+	unsigned char usb_rx_buf[8];
+	unsigned char usb_tx_buf[8];
+
+	struct rx_data {
+		int count;		/* length of 0 or 1 sequence */
+		int prev_bit;		/* logic level of sequence */
+		int initial_space;	/* initial space flag */
+	} rx;
+
+	struct tx_t {
+		unsigned char data_buf[IMON_DATA_BUF_SZ]; /* user data buffer */
+		struct completion finished;	/* wait for write to finish */
+		atomic_t busy;			/* write in progress */
+		int status;			/* status of tx completion */
+	} tx;
+};
+
+static const struct file_operations display_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &display_open,
+	.write		= &vfd_write,
+	.release	= &display_close
+};
+
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2).
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+	/* TriGem iMON (IR only) -- TG_iMON.inf */
+	{ USB_DEVICE(0x0aa8, 0x8001) },
+
+	/* SoundGraph iMON (IR only) -- sg_imon.inf */
+	{ USB_DEVICE(0x04e8, 0xff30) },
+
+	/* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
+	{ USB_DEVICE(0x0aa8, 0xffda) },
+
+	/* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
+	{ USB_DEVICE(0x15c2, 0xffda) },
+
+	{}
+};
+
+/* Some iMON VFD models requires a 6th packet for VFD writes */
+static struct usb_device_id vfd_proto_6p_list[] = {
+	{ USB_DEVICE(0x15c2, 0xffda) },
+	{}
+};
+
+/* Some iMON devices have no lcd/vfd, don't set one up */
+static struct usb_device_id ir_only_list[] = {
+	{ USB_DEVICE(0x0aa8, 0x8001) },
+	{ USB_DEVICE(0x04e8, 0xff30) },
+	{}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+	.name		= MOD_NAME,
+	.probe		= imon_probe,
+	.disconnect	= imon_disconnect,
+	.suspend	= imon_suspend,
+	.resume		= imon_resume,
+	.id_table	= imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_class = {
+	.name		= DEVICE_NAME,
+	.fops		= &display_fops,
+	.minor_base	= DISPLAY_MINOR_BASE,
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+static int debug;
+
+/***  M O D U L E   C O D E ***/
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
+
+static void free_imon_context(struct imon_context *context)
+{
+	struct device *dev = context->driver->dev;
+	usb_free_urb(context->tx_urb);
+	usb_free_urb(context->rx_urb);
+	lirc_buffer_free(context->driver->rbuf);
+	kfree(context->driver->rbuf);
+	kfree(context->driver);
+	kfree(context);
+
+	dev_dbg(dev, "%s: iMON context freed\n", __func__);
+}
+
+static void deregister_from_lirc(struct imon_context *context)
+{
+	int retval;
+	int minor = context->driver->minor;
+
+	retval = lirc_unregister_driver(minor);
+	if (retval)
+		err("%s: unable to deregister from lirc(%d)",
+			__func__, retval);
+	else
+		printk(KERN_INFO MOD_NAME ": Deregistered iMON driver "
+		       "(minor:%d)\n", minor);
+
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+	struct usb_interface *interface;
+	struct imon_context *context = NULL;
+	int subminor;
+	int retval = 0;
+
+	/* prevent races with disconnect */
+	mutex_lock(&driver_lock);
+
+	subminor = iminor(inode);
+	interface = usb_find_interface(&imon_driver, subminor);
+	if (!interface) {
+		err("%s: could not find interface for minor %d",
+		    __func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+	context = usb_get_intfdata(interface);
+
+	if (!context) {
+		err("%s: no context found for minor %d",
+					__func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (!context->display) {
+		err("%s: display not supported by device", __func__);
+		retval = -ENODEV;
+	} else if (context->display_isopen) {
+		err("%s: display port is already open", __func__);
+		retval = -EBUSY;
+	} else {
+		context->display_isopen = 1;
+		file->private_data = context;
+		dev_info(context->driver->dev, "display port opened\n");
+	}
+
+	mutex_unlock(&context->ctx_lock);
+
+exit:
+	mutex_unlock(&driver_lock);
+	return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+	struct imon_context *context = NULL;
+	int retval = 0;
+
+	context = (struct imon_context *)file->private_data;
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (!context->display) {
+		err("%s: display not supported by device", __func__);
+		retval = -ENODEV;
+	} else if (!context->display_isopen) {
+		err("%s: display is not open", __func__);
+		retval = -EIO;
+	} else {
+		context->display_isopen = 0;
+		dev_info(context->driver->dev, "display port closed\n");
+		if (!context->dev_present && !context->ir_isopen) {
+			/*
+			 * Device disconnected before close and IR port is not
+			 * open. If IR port is open, context will be deleted by
+			 * ir_close.
+			 */
+			mutex_unlock(&context->ctx_lock);
+			free_imon_context(context);
+			return retval;
+		}
+	}
+
+	mutex_unlock(&context->ctx_lock);
+	return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with context->ctx_lock held.
+ */
+static int send_packet(struct imon_context *context)
+{
+	unsigned int pipe;
+	int interval = 0;
+	int retval = 0;
+	struct usb_ctrlrequest *control_req = NULL;
+
+	/* Check if we need to use control or interrupt urb */
+	pipe = usb_sndintpipe(context->usbdev,
+			      context->tx_endpoint->bEndpointAddress);
+	interval = context->tx_endpoint->bInterval;
+
+	usb_fill_int_urb(context->tx_urb, context->usbdev, pipe,
+			 context->usb_tx_buf,
+			 sizeof(context->usb_tx_buf),
+			 usb_tx_callback, context, interval);
+
+	context->tx_urb->actual_length = 0;
+
+	init_completion(&context->tx.finished);
+	atomic_set(&(context->tx.busy), 1);
+
+	retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
+	if (retval) {
+		atomic_set(&(context->tx.busy), 0);
+		err("%s: error submitting urb(%d)", __func__, retval);
+	} else {
+		/* Wait for transmission to complete (or abort) */
+		mutex_unlock(&context->ctx_lock);
+		retval = wait_for_completion_interruptible(
+				&context->tx.finished);
+		if (retval)
+			err("%s: task interrupted", __func__);
+		mutex_lock(&context->ctx_lock);
+
+		retval = context->tx.status;
+		if (retval)
+			err("%s: packet tx failed (%d)", __func__, retval);
+	}
+
+	kfree(control_req);
+
+	return retval;
+}
+
+/**
+ * Writes data to the VFD.  The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data.  If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos)
+{
+	int i;
+	int offset;
+	int seq;
+	int retval = 0;
+	struct imon_context *context;
+	const unsigned char vfd_packet6[] = {
+		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+	int *data_buf;
+
+	context = (struct imon_context *)file->private_data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (!context->dev_present) {
+		err("%s: no iMON device present", __func__);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) {
+		err("%s: invalid payload size", __func__);
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	data_buf = memdup_user(buf, n_bytes);
+	if (IS_ERR(data_buf)) {
+		retval = PTR_ERR(data_buf);
+		goto exit;
+	}
+
+	memcpy(context->tx.data_buf, data_buf, n_bytes);
+
+	/* Pad with spaces */
+	for (i = n_bytes; i < IMON_DATA_BUF_SZ - 3; ++i)
+		context->tx.data_buf[i] = ' ';
+
+	for (i = IMON_DATA_BUF_SZ - 3; i < IMON_DATA_BUF_SZ; ++i)
+		context->tx.data_buf[i] = 0xFF;
+
+	offset = 0;
+	seq = 0;
+
+	do {
+		memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7);
+		context->usb_tx_buf[7] = (unsigned char) seq;
+
+		retval = send_packet(context);
+		if (retval) {
+			err("%s: send packet failed for packet #%d",
+					__func__, seq/2);
+			goto exit;
+		} else {
+			seq += 2;
+			offset += 7;
+		}
+
+	} while (offset < IMON_DATA_BUF_SZ);
+
+	if (context->vfd_proto_6p) {
+		/* Send packet #6 */
+		memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+		context->usb_tx_buf[7] = (unsigned char) seq;
+		retval = send_packet(context);
+		if (retval)
+			err("%s: send packet failed for packet #%d",
+					__func__, seq/2);
+	}
+
+exit:
+	mutex_unlock(&context->ctx_lock);
+
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+	struct imon_context *context;
+
+	if (!urb)
+		return;
+	context = (struct imon_context *)urb->context;
+	if (!context)
+		return;
+
+	context->tx.status = urb->status;
+
+	/* notify waiters that write has finished */
+	atomic_set(&context->tx.busy, 0);
+	complete(&context->tx.finished);
+
+	return;
+}
+
+/**
+ * Called by lirc_dev when the application opens /dev/lirc
+ */
+static int ir_open(void *data)
+{
+	int retval = 0;
+	struct imon_context *context;
+
+	/* prevent races with disconnect */
+	mutex_lock(&driver_lock);
+
+	context = (struct imon_context *)data;
+
+	/* initial IR protocol decode variables */
+	context->rx.count = 0;
+	context->rx.initial_space = 1;
+	context->rx.prev_bit = 0;
+
+	context->ir_isopen = 1;
+	dev_info(context->driver->dev, "IR port opened\n");
+
+	mutex_unlock(&driver_lock);
+	return retval;
+}
+
+/**
+ * Called by lirc_dev when the application closes /dev/lirc
+ */
+static void ir_close(void *data)
+{
+	struct imon_context *context;
+
+	context = (struct imon_context *)data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	context->ir_isopen = 0;
+	dev_info(context->driver->dev, "IR port closed\n");
+
+	if (!context->dev_present) {
+		/*
+		 * Device disconnected while IR port was still open. Driver
+		 * was not deregistered at disconnect time, so do it now.
+		 */
+		deregister_from_lirc(context);
+
+		if (!context->display_isopen) {
+			mutex_unlock(&context->ctx_lock);
+			free_imon_context(context);
+			return;
+		}
+		/*
+		 * If display port is open, context will be deleted by
+		 * display_close
+		 */
+	}
+
+	mutex_unlock(&context->ctx_lock);
+	return;
+}
+
+/**
+ * Convert bit count to time duration (in us) and submit
+ * the value to lirc_dev.
+ */
+static void submit_data(struct imon_context *context)
+{
+	unsigned char buf[4];
+	int value = context->rx.count;
+	int i;
+
+	dev_dbg(context->driver->dev, "submitting data to LIRC\n");
+
+	value *= BIT_DURATION;
+	value &= PULSE_MASK;
+	if (context->rx.prev_bit)
+		value |= PULSE_BIT;
+
+	for (i = 0; i < 4; ++i)
+		buf[i] = value>>(i*8);
+
+	lirc_buffer_write(context->driver->rbuf, buf);
+	wake_up(&context->driver->rbuf->wait_poll);
+	return;
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+	int usecs = 0;
+	int sec   = 0;
+
+	if (b->tv_usec > a->tv_usec) {
+		usecs = 1000000;
+		sec--;
+	}
+
+	usecs += a->tv_usec - b->tv_usec;
+
+	sec += a->tv_sec - b->tv_sec;
+	sec *= 1000;
+	usecs /= 1000;
+	sec += usecs;
+
+	if (sec < 0)
+		sec = 1000;
+
+	return sec;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *context,
+				 struct urb *urb, int intf)
+{
+	int len = urb->actual_length;
+	unsigned char *buf = urb->transfer_buffer;
+	struct device *dev = context->driver->dev;
+	int octet, bit;
+	unsigned char mask;
+	int i, chunk_num;
+
+	/*
+	 * just bail out if no listening IR client
+	 */
+	if (!context->ir_isopen)
+		return;
+
+	if (len != 8) {
+		dev_warn(dev, "imon %s: invalid incoming packet "
+			 "size (len = %d, intf%d)\n", __func__, len, intf);
+		return;
+	}
+
+	if (debug) {
+		printk(KERN_INFO "raw packet: ");
+		for (i = 0; i < len; ++i)
+			printk("%02x ", buf[i]);
+		printk("\n");
+	}
+
+	/*
+	 * Translate received data to pulse and space lengths.
+	 * Received data is active low, i.e. pulses are 0 and
+	 * spaces are 1.
+	 *
+	 * My original algorithm was essentially similar to
+	 * Changwoo Ryu's with the exception that he switched
+	 * the incoming bits to active high and also fed an
+	 * initial space to LIRC at the start of a new sequence
+	 * if the previous bit was a pulse.
+	 *
+	 * I've decided to adopt his algorithm.
+	 */
+
+	if (buf[7] == 1 && context->rx.initial_space) {
+		/* LIRC requires a leading space */
+		context->rx.prev_bit = 0;
+		context->rx.count = 4;
+		submit_data(context);
+		context->rx.count = 0;
+	}
+
+	for (octet = 0; octet < 5; ++octet) {
+		mask = 0x80;
+		for (bit = 0; bit < 8; ++bit) {
+			int curr_bit = !(buf[octet] & mask);
+			if (curr_bit != context->rx.prev_bit) {
+				if (context->rx.count) {
+					submit_data(context);
+					context->rx.count = 0;
+				}
+				context->rx.prev_bit = curr_bit;
+			}
+			++context->rx.count;
+			mask >>= 1;
+		}
+	}
+
+	if (chunk_num == 10) {
+		if (context->rx.count) {
+			submit_data(context);
+			context->rx.count = 0;
+		}
+		context->rx.initial_space = context->rx.prev_bit;
+	}
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback(struct urb *urb)
+{
+	struct imon_context *context;
+	unsigned char *buf;
+	int len;
+	int intfnum = 0;
+
+	if (!urb)
+		return;
+
+	context = (struct imon_context *)urb->context;
+	if (!context)
+		return;
+
+	buf = urb->transfer_buffer;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case 0:
+		imon_incoming_packet(context, urb, intfnum);
+		break;
+
+	default:
+		dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+
+	return;
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int imon_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = NULL;
+	struct usb_host_interface *iface_desc = NULL;
+	struct usb_endpoint_descriptor *rx_endpoint = NULL;
+	struct usb_endpoint_descriptor *tx_endpoint = NULL;
+	struct urb *rx_urb = NULL;
+	struct urb *tx_urb = NULL;
+	struct lirc_driver *driver = NULL;
+	struct lirc_buffer *rbuf = NULL;
+	struct device *dev = &interface->dev;
+	int ifnum;
+	int lirc_minor = 0;
+	int num_endpts;
+	int retval = 0;
+	int display_ep_found = 0;
+	int ir_ep_found = 0;
+	int alloc_status = 0;
+	int vfd_proto_6p = 0;
+	int code_length;
+	struct imon_context *context = NULL;
+	int i;
+	u16 vendor, product;
+
+	context = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+	if (!context) {
+		err("%s: kzalloc failed for context", __func__);
+		alloc_status = 1;
+		goto alloc_status_switch;
+	}
+
+	/*
+	 * Try to auto-detect the type of display if the user hasn't set
+	 * it by hand via the display_type modparam. Default is VFD.
+	 */
+	if (usb_match_id(interface, ir_only_list))
+		context->display = 0;
+	else
+		context->display = 1;
+
+	code_length = BUF_CHUNK_SIZE * 8;
+
+	usbdev     = usb_get_dev(interface_to_usbdev(interface));
+	iface_desc = interface->cur_altsetting;
+	num_endpts = iface_desc->desc.bNumEndpoints;
+	ifnum      = iface_desc->desc.bInterfaceNumber;
+	vendor     = le16_to_cpu(usbdev->descriptor.idVendor);
+	product    = le16_to_cpu(usbdev->descriptor.idProduct);
+
+	dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+		__func__, vendor, product, ifnum);
+
+	/* prevent races probing devices w/multiple interfaces */
+	mutex_lock(&driver_lock);
+
+	/*
+	 * Scan the endpoint list and set:
+	 *	first input endpoint = IR endpoint
+	 *	first output endpoint = display endpoint
+	 */
+	for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+		struct usb_endpoint_descriptor *ep;
+		int ep_dir;
+		int ep_type;
+		ep = &iface_desc->endpoint[i].desc;
+		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+		if (!ir_ep_found &&
+			ep_dir == USB_DIR_IN &&
+			ep_type == USB_ENDPOINT_XFER_INT) {
+
+			rx_endpoint = ep;
+			ir_ep_found = 1;
+			dev_dbg(dev, "%s: found IR endpoint\n", __func__);
+
+		} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
+			   ep_type == USB_ENDPOINT_XFER_INT) {
+			tx_endpoint = ep;
+			display_ep_found = 1;
+			dev_dbg(dev, "%s: found display endpoint\n", __func__);
+		}
+	}
+
+	/*
+	 * Some iMON receivers have no display. Unfortunately, it seems
+	 * that SoundGraph recycles device IDs between devices both with
+	 * and without... :\
+	 */
+	if (context->display == 0) {
+		display_ep_found = 0;
+		dev_dbg(dev, "%s: device has no display\n", __func__);
+	}
+
+	/* Input endpoint is mandatory */
+	if (!ir_ep_found) {
+		err("%s: no valid input (IR) endpoint found.", __func__);
+		retval = -ENODEV;
+		alloc_status = 2;
+		goto alloc_status_switch;
+	}
+
+	/* Determine if display requires 6 packets */
+	if (display_ep_found) {
+		if (usb_match_id(interface, vfd_proto_6p_list))
+			vfd_proto_6p = 1;
+
+		dev_dbg(dev, "%s: vfd_proto_6p: %d\n",
+			__func__, vfd_proto_6p);
+	}
+
+	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!driver) {
+		err("%s: kzalloc failed for lirc_driver", __func__);
+		alloc_status = 2;
+		goto alloc_status_switch;
+	}
+	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!rbuf) {
+		err("%s: kmalloc failed for lirc_buffer", __func__);
+		alloc_status = 3;
+		goto alloc_status_switch;
+	}
+	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
+		err("%s: lirc_buffer_init failed", __func__);
+		alloc_status = 4;
+		goto alloc_status_switch;
+	}
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!rx_urb) {
+		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		alloc_status = 5;
+		goto alloc_status_switch;
+	}
+	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tx_urb) {
+		err("%s: usb_alloc_urb failed for display urb",
+		    __func__);
+		alloc_status = 6;
+		goto alloc_status_switch;
+	}
+
+	mutex_init(&context->ctx_lock);
+	context->vfd_proto_6p = vfd_proto_6p;
+
+	strcpy(driver->name, MOD_NAME);
+	driver->minor = -1;
+	driver->code_length = sizeof(int) * 8;
+	driver->sample_rate = 0;
+	driver->features = LIRC_CAN_REC_MODE2;
+	driver->data = context;
+	driver->rbuf = rbuf;
+	driver->set_use_inc = ir_open;
+	driver->set_use_dec = ir_close;
+	driver->dev = &interface->dev;
+	driver->owner = THIS_MODULE;
+
+	mutex_lock(&context->ctx_lock);
+
+	context->driver = driver;
+	/* start out in keyboard mode */
+
+	lirc_minor = lirc_register_driver(driver);
+	if (lirc_minor < 0) {
+		err("%s: lirc_register_driver failed", __func__);
+		alloc_status = 7;
+		goto alloc_status_switch;
+	} else
+		dev_info(dev, "Registered iMON driver "
+			 "(lirc minor: %d)\n", lirc_minor);
+
+	/* Needed while unregistering! */
+	driver->minor = lirc_minor;
+
+	context->usbdev = usbdev;
+	context->dev_present = 1;
+	context->rx_endpoint = rx_endpoint;
+	context->rx_urb = rx_urb;
+
+	/*
+	 * tx is used to send characters to lcd/vfd, associate RF
+	 * remotes, set IR protocol, and maybe more...
+	 */
+	context->tx_endpoint = tx_endpoint;
+	context->tx_urb = tx_urb;
+
+	if (display_ep_found)
+		context->display = 1;
+
+	usb_fill_int_urb(context->rx_urb, context->usbdev,
+		usb_rcvintpipe(context->usbdev,
+			context->rx_endpoint->bEndpointAddress),
+		context->usb_rx_buf, sizeof(context->usb_rx_buf),
+		usb_rx_callback, context,
+		context->rx_endpoint->bInterval);
+
+	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
+
+	if (retval) {
+		err("%s: usb_submit_urb failed for intf0 (%d)",
+		    __func__, retval);
+		mutex_unlock(&context->ctx_lock);
+		goto exit;
+	}
+
+	usb_set_intfdata(interface, context);
+
+	if (context->display && ifnum == 0) {
+		dev_dbg(dev, "%s: Registering iMON display with sysfs\n",
+			__func__);
+
+		if (usb_register_dev(interface, &imon_class)) {
+			/* Not a fatal error, so ignore */
+			dev_info(dev, "%s: could not get a minor number for "
+				 "display\n", __func__);
+		}
+	}
+
+	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+alloc_status_switch:
+	mutex_unlock(&context->ctx_lock);
+
+	switch (alloc_status) {
+	case 7:
+		usb_free_urb(tx_urb);
+	case 6:
+		usb_free_urb(rx_urb);
+	case 5:
+		if (rbuf)
+			lirc_buffer_free(rbuf);
+	case 4:
+		kfree(rbuf);
+	case 3:
+		kfree(driver);
+	case 2:
+		kfree(context);
+		context = NULL;
+	case 1:
+		if (retval != -ENODEV)
+			retval = -ENOMEM;
+		break;
+	case 0:
+		retval = 0;
+	}
+
+exit:
+	mutex_unlock(&driver_lock);
+
+	return retval;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void imon_disconnect(struct usb_interface *interface)
+{
+	struct imon_context *context;
+	int ifnum;
+
+	/* prevent races with ir_open()/display_open() */
+	mutex_lock(&driver_lock);
+
+	context = usb_get_intfdata(interface);
+	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	mutex_lock(&context->ctx_lock);
+
+	usb_set_intfdata(interface, NULL);
+
+	/* Abort ongoing write */
+	if (atomic_read(&context->tx.busy)) {
+		usb_kill_urb(context->tx_urb);
+		complete_all(&context->tx.finished);
+	}
+
+	context->dev_present = 0;
+	usb_kill_urb(context->rx_urb);
+	if (context->display)
+		usb_deregister_dev(interface, &imon_class);
+
+	if (!context->ir_isopen && !context->dev_present) {
+		deregister_from_lirc(context);
+		mutex_unlock(&context->ctx_lock);
+		if (!context->display_isopen)
+			free_imon_context(context);
+	} else
+		mutex_unlock(&context->ctx_lock);
+
+	mutex_unlock(&driver_lock);
+
+	printk(KERN_INFO "%s: iMON device (intf%d) disconnected\n",
+	       __func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct imon_context *context = usb_get_intfdata(intf);
+
+	usb_kill_urb(context->rx_urb);
+
+	return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+	int rc = 0;
+	struct imon_context *context = usb_get_intfdata(intf);
+
+	usb_fill_int_urb(context->rx_urb, context->usbdev,
+		usb_rcvintpipe(context->usbdev,
+			context->rx_endpoint->bEndpointAddress),
+		context->usb_rx_buf, sizeof(context->usb_rx_buf),
+		usb_rx_callback, context,
+		context->rx_endpoint->bInterval);
+
+	rc = usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+
+	return rc;
+}
+
+static int __init imon_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO MOD_NAME ": " MOD_DESC ", v" MOD_VERSION "\n");
+
+	rc = usb_register(&imon_driver);
+	if (rc) {
+		err("%s: usb register failed(%d)", __func__, rc);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit imon_exit(void)
+{
+	usb_deregister(&imon_driver);
+	printk(KERN_INFO MOD_NAME ": module removed. Goodbye!\n");
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c
new file mode 100644
index 00000000000..09f36961c6d
--- /dev/null
+++ b/drivers/staging/lirc/lirc_it87.c
@@ -0,0 +1,1019 @@
+/*
+ * LIRC driver for ITE IT8712/IT8705 CIR port
+ *
+ * Copyright (C) 2001 Hans-Gunter Lutke Uphues <hg_lu@web.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * ITE IT8705 and IT8712(not tested) and IT8720 CIR-port support for lirc based
+ * via cut and paste from lirc_sir.c (C) 2000 Milan Pikula
+ *
+ * Attention: Sendmode only tested with debugging logs
+ *
+ * 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> :
+ *   reimplemented read function
+ * 2005/06/05 Andrew Calkin implemented support for Asus Digimatrix,
+ *   based on work of the following member of the Outertrack Digimatrix
+ *   Forum: Art103 <r_tay@hotmail.com>
+ * 2009/12/24 James Edwards <jimbo-lirc@edwardsclan.net> implemeted support
+ *   for ITE8704/ITE8718, on my machine, the DSDT reports 8704, but the
+ *   chip identifies as 18.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/fcntl.h>
+
+#include <linux/timer.h>
+#include <linux/pnp.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#include "lirc_it87.h"
+
+#ifdef LIRC_IT87_DIGIMATRIX
+static int digimatrix = 1;
+static int it87_freq = 36; /* kHz */
+static int irq = 9;
+#else
+static int digimatrix;
+static int it87_freq = 38; /* kHz */
+static int irq = IT87_CIR_DEFAULT_IRQ;
+#endif
+
+static unsigned long it87_bits_in_byte_out;
+static unsigned long it87_send_counter;
+static unsigned char it87_RXEN_mask = IT87_CIR_RCR_RXEN;
+
+#define RBUF_LEN 1024
+
+#define LIRC_DRIVER_NAME "lirc_it87"
+
+/* timeout for sequences in jiffies (=5/100s) */
+/* must be longer than TIME_CONST */
+#define IT87_TIMEOUT	(HZ*5/100)
+
+/* module parameters */
+static int debug;
+#define dprintk(fmt, args...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "	\
+			       fmt, ## args);			\
+	} while (0)
+
+static int io = IT87_CIR_DEFAULT_IOBASE;
+/* receiver demodulator default: off */
+static int it87_enable_demodulator;
+
+static int timer_enabled;
+static DEFINE_SPINLOCK(timer_lock);
+static struct timer_list timerlist;
+/* time of last signal change detected */
+static struct timeval last_tv = {0, 0};
+/* time of last UART data ready interrupt */
+static struct timeval last_intr_tv = {0, 0};
+static int last_value;
+
+static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
+
+static DEFINE_SPINLOCK(hardware_lock);
+static DEFINE_SPINLOCK(dev_lock);
+
+static int rx_buf[RBUF_LEN];
+unsigned int rx_tail, rx_head;
+
+static struct pnp_driver it87_pnp_driver;
+
+/* SECTION: Prototypes */
+
+/* Communication with user-space */
+static int lirc_open(struct inode *inode, struct file *file);
+static int lirc_close(struct inode *inode, struct file *file);
+static unsigned int lirc_poll(struct file *file, poll_table *wait);
+static ssize_t lirc_read(struct file *file, char *buf,
+			 size_t count, loff_t *ppos);
+static ssize_t lirc_write(struct file *file, const char *buf,
+			  size_t n, loff_t *pos);
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+static void add_read_queue(int flag, unsigned long val);
+static int init_chrdev(void);
+static void drop_chrdev(void);
+/* Hardware */
+static irqreturn_t it87_interrupt(int irq, void *dev_id);
+static void send_space(unsigned long len);
+static void send_pulse(unsigned long len);
+static void init_send(void);
+static void terminate_send(unsigned long len);
+static int init_hardware(void);
+static void drop_hardware(void);
+/* Initialisation */
+static int init_port(void);
+static void drop_port(void);
+
+
+/* SECTION: Communication with user-space */
+
+static int lirc_open(struct inode *inode, struct file *file)
+{
+	spin_lock(&dev_lock);
+	if (module_refcount(THIS_MODULE)) {
+		spin_unlock(&dev_lock);
+		return -EBUSY;
+	}
+	spin_unlock(&dev_lock);
+	return 0;
+}
+
+
+static int lirc_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &lirc_read_queue, wait);
+	if (rx_head != rx_tail)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+
+static ssize_t lirc_read(struct file *file, char *buf,
+			 size_t count, loff_t *ppos)
+{
+	int n = 0;
+	int retval = 0;
+
+	while (n < count) {
+		if (file->f_flags & O_NONBLOCK && rx_head == rx_tail) {
+			retval = -EAGAIN;
+			break;
+		}
+		retval = wait_event_interruptible(lirc_read_queue,
+						  rx_head != rx_tail);
+		if (retval)
+			break;
+
+		if (copy_to_user((void *) buf + n, (void *) (rx_buf + rx_head),
+				 sizeof(int))) {
+			retval = -EFAULT;
+			break;
+		}
+		rx_head = (rx_head + 1) & (RBUF_LEN - 1);
+		n += sizeof(int);
+	}
+	if (n)
+		return n;
+	return retval;
+}
+
+
+static ssize_t lirc_write(struct file *file, const char *buf,
+			  size_t n, loff_t *pos)
+{
+	int i = 0;
+	int *tx_buf;
+
+	if (n % sizeof(int))
+		return -EINVAL;
+	tx_buf = memdup_user(buf, n);
+	if (IS_ERR(tx_buf))
+		return PTR_ERR(tx_buf);
+	n /= sizeof(int);
+	init_send();
+	while (1) {
+		if (i >= n)
+			break;
+		if (tx_buf[i])
+			send_pulse(tx_buf[i]);
+		i++;
+		if (i >= n)
+			break;
+		if (tx_buf[i])
+			send_space(tx_buf[i]);
+		i++;
+	}
+	terminate_send(tx_buf[i - 1]);
+	return n;
+}
+
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	int retval = 0;
+	unsigned long value = 0;
+	unsigned int ivalue;
+	unsigned long hw_flags;
+
+	if (cmd == LIRC_GET_FEATURES)
+		value = LIRC_CAN_SEND_PULSE |
+			LIRC_CAN_SET_SEND_CARRIER |
+			LIRC_CAN_REC_MODE2;
+	else if (cmd == LIRC_GET_SEND_MODE)
+		value = LIRC_MODE_PULSE;
+	else if (cmd == LIRC_GET_REC_MODE)
+		value = LIRC_MODE_MODE2;
+
+	switch (cmd) {
+	case LIRC_GET_FEATURES:
+	case LIRC_GET_SEND_MODE:
+	case LIRC_GET_REC_MODE:
+		retval = put_user(value, (unsigned long *) arg);
+		break;
+
+	case LIRC_SET_SEND_MODE:
+	case LIRC_SET_REC_MODE:
+		retval = get_user(value, (unsigned long *) arg);
+		break;
+
+	case LIRC_SET_SEND_CARRIER:
+		retval = get_user(ivalue, (unsigned int *) arg);
+		if (retval)
+			return retval;
+		ivalue /= 1000;
+		if (ivalue > IT87_CIR_FREQ_MAX ||
+		    ivalue < IT87_CIR_FREQ_MIN)
+			return -EINVAL;
+
+		it87_freq = ivalue;
+
+		spin_lock_irqsave(&hardware_lock, hw_flags);
+		outb(((inb(io + IT87_CIR_TCR2) & IT87_CIR_TCR2_TXMPW) |
+		      (it87_freq - IT87_CIR_FREQ_MIN) << 3),
+		      io + IT87_CIR_TCR2);
+		spin_unlock_irqrestore(&hardware_lock, hw_flags);
+		dprintk("demodulation frequency: %d kHz\n", it87_freq);
+
+		break;
+
+	default:
+		retval = -EINVAL;
+	}
+
+	if (retval)
+		return retval;
+
+	if (cmd == LIRC_SET_REC_MODE) {
+		if (value != LIRC_MODE_MODE2)
+			retval = -ENOSYS;
+	} else if (cmd == LIRC_SET_SEND_MODE) {
+		if (value != LIRC_MODE_PULSE)
+			retval = -ENOSYS;
+	}
+	return retval;
+}
+
+static void add_read_queue(int flag, unsigned long val)
+{
+	unsigned int new_rx_tail;
+	int newval;
+
+	dprintk("add flag %d with val %lu\n", flag, val);
+
+	newval = val & PULSE_MASK;
+
+	/*
+	 * statistically, pulses are ~TIME_CONST/2 too long. we could
+	 * maybe make this more exact, but this is good enough
+	 */
+	if (flag) {
+		/* pulse */
+		if (newval > TIME_CONST / 2)
+			newval -= TIME_CONST / 2;
+		else /* should not ever happen */
+			newval = 1;
+		newval |= PULSE_BIT;
+	} else
+		newval += TIME_CONST / 2;
+	new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1);
+	if (new_rx_tail == rx_head) {
+		dprintk("Buffer overrun.\n");
+		return;
+	}
+	rx_buf[rx_tail] = newval;
+	rx_tail = new_rx_tail;
+	wake_up_interruptible(&lirc_read_queue);
+}
+
+
+static const struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.read		= lirc_read,
+	.write		= lirc_write,
+	.poll		= lirc_poll,
+	.unlocked_ioctl	= lirc_ioctl,
+	.open		= lirc_open,
+	.release	= lirc_close,
+};
+
+static int set_use_inc(void *data)
+{
+       return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+       .name		= LIRC_DRIVER_NAME,
+       .minor		= -1,
+       .code_length	= 1,
+       .sample_rate	= 0,
+       .data		= NULL,
+       .add_to_buf	= NULL,
+       .set_use_inc	= set_use_inc,
+       .set_use_dec	= set_use_dec,
+       .fops		= &lirc_fops,
+       .dev		= NULL,
+       .owner		= THIS_MODULE,
+};
+
+
+#ifdef MODULE
+static int init_chrdev(void)
+{
+	driver.minor = lirc_register_driver(&driver);
+
+	if (driver.minor < 0) {
+		printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+
+static void drop_chrdev(void)
+{
+	lirc_unregister_driver(driver.minor);
+}
+#endif
+
+
+/* SECTION: Hardware */
+static long delta(struct timeval *tv1, struct timeval *tv2)
+{
+	unsigned long deltv;
+
+	deltv = tv2->tv_sec - tv1->tv_sec;
+	if (deltv > 15)
+		deltv = 0xFFFFFF;
+	else
+		deltv = deltv*1000000 + tv2->tv_usec - tv1->tv_usec;
+	return deltv;
+}
+
+static void it87_timeout(unsigned long data)
+{
+	unsigned long flags;
+
+	/* avoid interference with interrupt */
+	spin_lock_irqsave(&timer_lock, flags);
+
+	if (digimatrix) {
+		/* We have timed out. Disable the RX mechanism. */
+
+		outb((inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN) |
+		     IT87_CIR_RCR_RXACT, io + IT87_CIR_RCR);
+		if (it87_RXEN_mask)
+			outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN,
+			     io + IT87_CIR_RCR);
+		dprintk(" TIMEOUT\n");
+		timer_enabled = 0;
+
+		/* fifo clear */
+		outb(inb(io + IT87_CIR_TCR1) | IT87_CIR_TCR1_FIFOCLR,
+		     io+IT87_CIR_TCR1);
+
+	} else {
+		/*
+		 * if last received signal was a pulse, but receiving stopped
+		 * within the 9 bit frame, we need to finish this pulse and
+		 * simulate a signal change to from pulse to space. Otherwise
+		 * upper layers will receive two sequences next time.
+		 */
+
+		if (last_value) {
+			unsigned long pulse_end;
+
+			/* determine 'virtual' pulse end: */
+			pulse_end = delta(&last_tv, &last_intr_tv);
+			dprintk("timeout add %d for %lu usec\n",
+				last_value, pulse_end);
+			add_read_queue(last_value, pulse_end);
+			last_value = 0;
+			last_tv = last_intr_tv;
+		}
+	}
+	spin_unlock_irqrestore(&timer_lock, flags);
+}
+
+static irqreturn_t it87_interrupt(int irq, void *dev_id)
+{
+	unsigned char data;
+	struct timeval curr_tv;
+	static unsigned long deltv;
+	unsigned long deltintrtv;
+	unsigned long flags, hw_flags;
+	int iir, lsr;
+	int fifo = 0;
+	static char lastbit;
+	char bit;
+
+	/* Bit duration in microseconds */
+	const unsigned long bit_duration = 1000000ul /
+		(115200 / IT87_CIR_BAUDRATE_DIVISOR);
+
+
+	iir = inb(io + IT87_CIR_IIR);
+
+	switch (iir & IT87_CIR_IIR_IID) {
+	case 0x4:
+	case 0x6:
+		lsr = inb(io + IT87_CIR_RSR) & (IT87_CIR_RSR_RXFTO |
+						IT87_CIR_RSR_RXFBC);
+		fifo = lsr & IT87_CIR_RSR_RXFBC;
+		dprintk("iir: 0x%x fifo: 0x%x\n", iir, lsr);
+
+		/* avoid interference with timer */
+		spin_lock_irqsave(&timer_lock, flags);
+		spin_lock_irqsave(&hardware_lock, hw_flags);
+		if (digimatrix) {
+			static unsigned long acc_pulse;
+			static unsigned long acc_space;
+
+			do {
+				data = inb(io + IT87_CIR_DR);
+				data = ~data;
+				fifo--;
+				if (data != 0x00) {
+					if (timer_enabled)
+						del_timer(&timerlist);
+					/*
+					 * start timer for end of
+					 * sequence detection
+					 */
+					timerlist.expires = jiffies +
+							    IT87_TIMEOUT;
+					add_timer(&timerlist);
+					timer_enabled = 1;
+				}
+				/* Loop through */
+				for (bit = 0; bit < 8; ++bit) {
+					if ((data >> bit) & 1) {
+						++acc_pulse;
+						if (lastbit == 0) {
+							add_read_queue(0,
+								acc_space *
+								 bit_duration);
+							acc_space = 0;
+						}
+					} else {
+						++acc_space;
+						if (lastbit == 1) {
+							add_read_queue(1,
+								acc_pulse *
+								 bit_duration);
+							acc_pulse = 0;
+						}
+					}
+					lastbit = (data >> bit) & 1;
+				}
+
+			} while (fifo != 0);
+		} else { /* Normal Operation */
+			do {
+				del_timer(&timerlist);
+				data = inb(io + IT87_CIR_DR);
+
+				dprintk("data=%02x\n", data);
+				do_gettimeofday(&curr_tv);
+				deltv = delta(&last_tv, &curr_tv);
+				deltintrtv = delta(&last_intr_tv, &curr_tv);
+
+				dprintk("t %lu , d %d\n",
+					deltintrtv, (int)data);
+
+				/*
+				 * if nothing came in last 2 cycles,
+				 * it was gap
+				 */
+				if (deltintrtv > TIME_CONST * 2) {
+					if (last_value) {
+						dprintk("GAP\n");
+
+						/* simulate signal change */
+						add_read_queue(last_value,
+							       deltv -
+							       deltintrtv);
+						last_value = 0;
+						last_tv.tv_sec =
+							last_intr_tv.tv_sec;
+						last_tv.tv_usec =
+							last_intr_tv.tv_usec;
+						deltv = deltintrtv;
+					}
+				}
+				data = 1;
+				if (data ^ last_value) {
+					/*
+					 * deltintrtv > 2*TIME_CONST,
+					 * remember ? the other case is
+					 * timeout
+					 */
+					add_read_queue(last_value,
+						       deltv-TIME_CONST);
+					last_value = data;
+					last_tv = curr_tv;
+					if (last_tv.tv_usec >= TIME_CONST)
+						last_tv.tv_usec -= TIME_CONST;
+					else {
+						last_tv.tv_sec--;
+						last_tv.tv_usec += 1000000 -
+							TIME_CONST;
+					}
+				}
+				last_intr_tv = curr_tv;
+				if (data) {
+					/*
+					 * start timer for end of
+					 * sequence detection
+					 */
+					timerlist.expires =
+						jiffies + IT87_TIMEOUT;
+					add_timer(&timerlist);
+				}
+				outb((inb(io + IT87_CIR_RCR) &
+				     ~IT87_CIR_RCR_RXEN) |
+				     IT87_CIR_RCR_RXACT,
+				     io + IT87_CIR_RCR);
+				if (it87_RXEN_mask)
+					outb(inb(io + IT87_CIR_RCR) |
+					     IT87_CIR_RCR_RXEN,
+					     io + IT87_CIR_RCR);
+				fifo--;
+			} while (fifo != 0);
+		}
+		spin_unlock_irqrestore(&hardware_lock, hw_flags);
+		spin_unlock_irqrestore(&timer_lock, flags);
+
+		return IRQ_RETVAL(IRQ_HANDLED);
+
+	default:
+		/* not our irq */
+		dprintk("unknown IRQ (shouldn't happen) !!\n");
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+}
+
+
+static void send_it87(unsigned long len, unsigned long stime,
+		      unsigned char send_byte, unsigned int count_bits)
+{
+	long count = len / stime;
+	long time_left = 0;
+	static unsigned char byte_out;
+	unsigned long hw_flags;
+
+	dprintk("%s: len=%ld, sb=%d\n", __func__, len, send_byte);
+
+	time_left = (long)len - (long)count * (long)stime;
+	count += ((2 * time_left) / stime);
+	while (count) {
+		long i = 0;
+		for (i = 0; i < count_bits; i++) {
+			byte_out = (byte_out << 1) | (send_byte & 1);
+			it87_bits_in_byte_out++;
+		}
+		if (it87_bits_in_byte_out == 8) {
+			dprintk("out=0x%x, tsr_txfbc: 0x%x\n",
+				byte_out,
+				inb(io + IT87_CIR_TSR) &
+				IT87_CIR_TSR_TXFBC);
+
+			while ((inb(io + IT87_CIR_TSR) &
+				IT87_CIR_TSR_TXFBC) >= IT87_CIR_FIFO_SIZE)
+				;
+
+			spin_lock_irqsave(&hardware_lock, hw_flags);
+			outb(byte_out, io + IT87_CIR_DR);
+			spin_unlock_irqrestore(&hardware_lock, hw_flags);
+
+			it87_bits_in_byte_out = 0;
+			it87_send_counter++;
+			byte_out = 0;
+		}
+		count--;
+	}
+}
+
+
+/*TODO: maybe exchange space and pulse because it8705 only modulates 0-bits */
+
+static void send_space(unsigned long len)
+{
+	send_it87(len, TIME_CONST, IT87_CIR_SPACE, IT87_CIR_BAUDRATE_DIVISOR);
+}
+
+static void send_pulse(unsigned long len)
+{
+	send_it87(len, TIME_CONST, IT87_CIR_PULSE, IT87_CIR_BAUDRATE_DIVISOR);
+}
+
+
+static void init_send()
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hardware_lock, flags);
+	/* RXEN=0: receiver disable */
+	it87_RXEN_mask = 0;
+	outb(inb(io + IT87_CIR_RCR) & ~IT87_CIR_RCR_RXEN,
+	     io + IT87_CIR_RCR);
+	spin_unlock_irqrestore(&hardware_lock, flags);
+	it87_bits_in_byte_out = 0;
+	it87_send_counter = 0;
+}
+
+
+static void terminate_send(unsigned long len)
+{
+	unsigned long flags;
+	unsigned long last = 0;
+
+	last = it87_send_counter;
+	/* make sure all necessary data has been sent */
+	while (last == it87_send_counter)
+		send_space(len);
+	/* wait until all data sent */
+	while ((inb(io + IT87_CIR_TSR) & IT87_CIR_TSR_TXFBC) != 0)
+		;
+	/* then re-enable receiver */
+	spin_lock_irqsave(&hardware_lock, flags);
+	it87_RXEN_mask = IT87_CIR_RCR_RXEN;
+	outb(inb(io + IT87_CIR_RCR) | IT87_CIR_RCR_RXEN,
+	     io + IT87_CIR_RCR);
+	spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+
+static int init_hardware(void)
+{
+	unsigned long flags;
+	unsigned char it87_rcr = 0;
+
+	spin_lock_irqsave(&hardware_lock, flags);
+	/* init cir-port */
+	/* enable r/w-access to Baudrate-Register */
+	outb(IT87_CIR_IER_BR, io + IT87_CIR_IER);
+	outb(IT87_CIR_BAUDRATE_DIVISOR % 0x100, io+IT87_CIR_BDLR);
+	outb(IT87_CIR_BAUDRATE_DIVISOR / 0x100, io+IT87_CIR_BDHR);
+	/* Baudrate Register off, define IRQs: Input only */
+	if (digimatrix) {
+		outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RFOIE, io + IT87_CIR_IER);
+		/* RX: HCFS=0, RXDCR = 001b (33,75..38,25 kHz), RXEN=1 */
+	} else {
+		outb(IT87_CIR_IER_IEC | IT87_CIR_IER_RDAIE, io + IT87_CIR_IER);
+		/* RX: HCFS=0, RXDCR = 001b (35,6..40,3 kHz), RXEN=1 */
+	}
+	it87_rcr = (IT87_CIR_RCR_RXEN & it87_RXEN_mask) | 0x1;
+	if (it87_enable_demodulator)
+		it87_rcr |= IT87_CIR_RCR_RXEND;
+	outb(it87_rcr, io + IT87_CIR_RCR);
+	if (digimatrix) {
+		/* Set FIFO depth to 1 byte, and disable TX */
+		outb(inb(io + IT87_CIR_TCR1) |  0x00,
+		     io + IT87_CIR_TCR1);
+
+		/*
+		 * TX: it87_freq (36kHz), 'reserved' sensitivity
+		 * setting (0x00)
+		 */
+		outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x00,
+		     io + IT87_CIR_TCR2);
+	} else {
+		/* TX: 38kHz, 13,3us (pulse-width) */
+		outb(((it87_freq - IT87_CIR_FREQ_MIN) << 3) | 0x06,
+		     io + IT87_CIR_TCR2);
+	}
+	spin_unlock_irqrestore(&hardware_lock, flags);
+	return 0;
+}
+
+
+static void drop_hardware(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hardware_lock, flags);
+	disable_irq(irq);
+	/* receiver disable */
+	it87_RXEN_mask = 0;
+	outb(0x1, io + IT87_CIR_RCR);
+	/* turn off irqs */
+	outb(0, io + IT87_CIR_IER);
+	/* fifo clear */
+	outb(IT87_CIR_TCR1_FIFOCLR, io+IT87_CIR_TCR1);
+	/* reset */
+	outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER);
+	enable_irq(irq);
+	spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+
+static unsigned char it87_read(unsigned char port)
+{
+	outb(port, IT87_ADRPORT);
+	return inb(IT87_DATAPORT);
+}
+
+
+static void it87_write(unsigned char port, unsigned char data)
+{
+	outb(port, IT87_ADRPORT);
+	outb(data, IT87_DATAPORT);
+}
+
+
+/* SECTION: Initialisation */
+
+static int init_port(void)
+{
+	unsigned long hw_flags;
+	int retval = 0;
+
+	unsigned char init_bytes[4] = IT87_INIT;
+	unsigned char it87_chipid = 0;
+	unsigned char ldn = 0;
+	unsigned int  it87_io = 0;
+	unsigned int  it87_irq = 0;
+
+	/* Enter MB PnP Mode */
+	outb(init_bytes[0], IT87_ADRPORT);
+	outb(init_bytes[1], IT87_ADRPORT);
+	outb(init_bytes[2], IT87_ADRPORT);
+	outb(init_bytes[3], IT87_ADRPORT);
+
+	/* 8712 or 8705 ? */
+	it87_chipid = it87_read(IT87_CHIP_ID1);
+	if (it87_chipid != 0x87) {
+		retval = -ENXIO;
+		return retval;
+	}
+	it87_chipid = it87_read(IT87_CHIP_ID2);
+	if ((it87_chipid != 0x05) &&
+		(it87_chipid != 0x12) &&
+		(it87_chipid != 0x18) &&
+		(it87_chipid != 0x20)) {
+		printk(KERN_INFO LIRC_DRIVER_NAME
+		       ": no IT8704/05/12/18/20 found (claimed IT87%02x), "
+		       "exiting..\n", it87_chipid);
+		retval = -ENXIO;
+		return retval;
+	}
+	printk(KERN_INFO LIRC_DRIVER_NAME
+	       ": found IT87%02x.\n",
+	       it87_chipid);
+
+	/* get I/O-Port and IRQ */
+	if (it87_chipid == 0x12 || it87_chipid == 0x18)
+		ldn = IT8712_CIR_LDN;
+	else
+		ldn = IT8705_CIR_LDN;
+	it87_write(IT87_LDN, ldn);
+
+	it87_io = it87_read(IT87_CIR_BASE_MSB) * 256 +
+		  it87_read(IT87_CIR_BASE_LSB);
+	if (it87_io == 0) {
+		if (io == 0)
+			io = IT87_CIR_DEFAULT_IOBASE;
+		printk(KERN_INFO LIRC_DRIVER_NAME
+		       ": set default io 0x%x\n",
+		       io);
+		it87_write(IT87_CIR_BASE_MSB, io / 0x100);
+		it87_write(IT87_CIR_BASE_LSB, io % 0x100);
+	} else
+		io = it87_io;
+
+	it87_irq = it87_read(IT87_CIR_IRQ);
+	if (digimatrix || it87_irq == 0) {
+		if (irq == 0)
+			irq = IT87_CIR_DEFAULT_IRQ;
+		printk(KERN_INFO LIRC_DRIVER_NAME
+		       ": set default irq 0x%x\n",
+		       irq);
+		it87_write(IT87_CIR_IRQ, irq);
+	} else
+		irq = it87_irq;
+
+	spin_lock_irqsave(&hardware_lock, hw_flags);
+	/* reset */
+	outb(IT87_CIR_IER_RESET, io+IT87_CIR_IER);
+	/* fifo clear */
+	outb(IT87_CIR_TCR1_FIFOCLR |
+	     /*	     IT87_CIR_TCR1_ILE | */
+	     IT87_CIR_TCR1_TXRLE |
+	     IT87_CIR_TCR1_TXENDF, io+IT87_CIR_TCR1);
+	spin_unlock_irqrestore(&hardware_lock, hw_flags);
+
+	/* get I/O port access and IRQ line */
+	if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": i/o port 0x%.4x already in use.\n", io);
+		/* Leaving MB PnP Mode */
+		it87_write(IT87_CFGCTRL, 0x2);
+		return -EBUSY;
+	}
+
+	/* activate CIR-Device */
+	it87_write(IT87_CIR_ACT, 0x1);
+
+	/* Leaving MB PnP Mode */
+	it87_write(IT87_CFGCTRL, 0x2);
+
+	retval = request_irq(irq, it87_interrupt, 0 /*IRQF_DISABLED*/,
+			     LIRC_DRIVER_NAME, NULL);
+	if (retval < 0) {
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": IRQ %d already in use.\n",
+		       irq);
+		release_region(io, 8);
+		return retval;
+	}
+
+	printk(KERN_INFO LIRC_DRIVER_NAME
+	       ": I/O port 0x%.4x, IRQ %d.\n", io, irq);
+
+	init_timer(&timerlist);
+	timerlist.function = it87_timeout;
+	timerlist.data = 0xabadcafe;
+
+	return 0;
+}
+
+
+static void drop_port(void)
+{
+#if 0
+	unsigned char init_bytes[4] = IT87_INIT;
+
+	/* Enter MB PnP Mode */
+	outb(init_bytes[0], IT87_ADRPORT);
+	outb(init_bytes[1], IT87_ADRPORT);
+	outb(init_bytes[2], IT87_ADRPORT);
+	outb(init_bytes[3], IT87_ADRPORT);
+
+	/* deactivate CIR-Device */
+	it87_write(IT87_CIR_ACT, 0x0);
+
+	/* Leaving MB PnP Mode */
+	it87_write(IT87_CFGCTRL, 0x2);
+#endif
+
+	del_timer_sync(&timerlist);
+	free_irq(irq, NULL);
+	release_region(io, 8);
+}
+
+
+static int init_lirc_it87(void)
+{
+	int retval;
+
+	init_waitqueue_head(&lirc_read_queue);
+	retval = init_port();
+	if (retval < 0)
+		return retval;
+	init_hardware();
+	printk(KERN_INFO LIRC_DRIVER_NAME ": Installed.\n");
+	return 0;
+}
+
+static int it87_probe(struct pnp_dev *pnp_dev,
+		      const struct pnp_device_id *dev_id)
+{
+	int retval;
+
+	driver.dev = &pnp_dev->dev;
+
+	retval = init_chrdev();
+	if (retval < 0)
+		return retval;
+
+	retval = init_lirc_it87();
+	if (retval)
+		goto init_lirc_it87_failed;
+
+	return 0;
+
+init_lirc_it87_failed:
+	drop_chrdev();
+
+	return retval;
+}
+
+static int __init lirc_it87_init(void)
+{
+	return pnp_register_driver(&it87_pnp_driver);
+}
+
+
+static void __exit lirc_it87_exit(void)
+{
+	drop_hardware();
+	drop_chrdev();
+	drop_port();
+	pnp_unregister_driver(&it87_pnp_driver);
+	printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n");
+}
+
+/* SECTION: PNP for ITE8704/18 */
+
+static const struct pnp_device_id pnp_dev_table[] = {
+	{"ITE8704", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static struct pnp_driver it87_pnp_driver = {
+	.name           = LIRC_DRIVER_NAME,
+	.id_table       = pnp_dev_table,
+	.probe		= it87_probe,
+};
+
+module_init(lirc_it87_init);
+module_exit(lirc_it87_exit);
+
+MODULE_DESCRIPTION("LIRC driver for ITE IT8704/05/12/18/20 CIR port");
+MODULE_AUTHOR("Hans-Gunter Lutke Uphues");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O base address (default: 0x310)");
+
+module_param(irq, int, S_IRUGO);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 9)");
+#else
+MODULE_PARM_DESC(irq, "Interrupt (1,3-12) (default: 7)");
+#endif
+
+module_param(it87_enable_demodulator, bool, S_IRUGO);
+MODULE_PARM_DESC(it87_enable_demodulator,
+		 "Receiver demodulator enable/disable (1/0), default: 0");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(digimatrix, bool, S_IRUGO | S_IWUSR);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(digimatrix,
+	"Asus Digimatrix it87 compat. enable/disable (1/0), default: 1");
+#else
+MODULE_PARM_DESC(digimatrix,
+	"Asus Digimatrix it87 compat. enable/disable (1/0), default: 0");
+#endif
+
+
+module_param(it87_freq, int, S_IRUGO);
+#ifdef LIRC_IT87_DIGIMATRIX
+MODULE_PARM_DESC(it87_freq,
+    "Carrier demodulator frequency (kHz), (default: 36)");
+#else
+MODULE_PARM_DESC(it87_freq,
+    "Carrier demodulator frequency (kHz), (default: 38)");
+#endif
diff --git a/drivers/staging/lirc/lirc_it87.h b/drivers/staging/lirc/lirc_it87.h
new file mode 100644
index 00000000000..cf021c893a3
--- /dev/null
+++ b/drivers/staging/lirc/lirc_it87.h
@@ -0,0 +1,116 @@
+/* lirc_it87.h */
+/* SECTION: Definitions */
+
+/********************************* ITE IT87xx ************************/
+
+/* based on the following documentation from ITE:
+   a) IT8712F Preliminary CIR Programming Guide V0.1
+   b) IT8705F Simple LPC I/O Preliminary Specification V0.3
+   c) IT8712F EC-LPC I/O Preliminary Specification V0.5
+*/
+
+/* IT8712/05 Ports: */
+#define IT87_ADRPORT      0x2e
+#define IT87_DATAPORT     0x2f
+#define IT87_INIT         {0x87, 0x01, 0x55, 0x55}
+
+/* alternate Ports: */
+/*
+#define IT87_ADRPORT      0x4e
+#define IT87_DATAPORT     0x4f
+#define IT87_INIT         {0x87, 0x01, 0x55, 0xaa}
+ */
+
+/* IT8712/05 Registers */
+#define IT87_CFGCTRL      0x2
+#define IT87_LDN          0x7
+#define IT87_CHIP_ID1     0x20
+#define IT87_CHIP_ID2     0x21
+#define IT87_CFG_VERSION  0x22
+#define IT87_SWSUSPEND    0x23
+
+#define IT8712_CIR_LDN    0xa
+#define IT8705_CIR_LDN    0x7
+
+/* CIR Configuration Registers: */
+#define IT87_CIR_ACT      0x30
+#define IT87_CIR_BASE_MSB 0x60
+#define IT87_CIR_BASE_LSB 0x61
+#define IT87_CIR_IRQ      0x70
+#define IT87_CIR_CONFIG   0xf0
+
+/* List of IT87_CIR registers: offset to BaseAddr */
+#define IT87_CIR_DR   0
+#define IT87_CIR_IER  1
+#define IT87_CIR_RCR  2
+#define IT87_CIR_TCR1 3
+#define IT87_CIR_TCR2 4
+#define IT87_CIR_TSR  5
+#define IT87_CIR_RSR  6
+#define IT87_CIR_BDLR 5
+#define IT87_CIR_BDHR 6
+#define IT87_CIR_IIR  7
+
+/* Bit Definition */
+/* IER: */
+#define IT87_CIR_IER_TM_EN   0x80
+#define IT87_CIR_IER_RESEVED 0x40
+#define IT87_CIR_IER_RESET   0x20
+#define IT87_CIR_IER_BR      0x10
+#define IT87_CIR_IER_IEC     0x8
+#define IT87_CIR_IER_RFOIE   0x4
+#define IT87_CIR_IER_RDAIE   0x2
+#define IT87_CIR_IER_TLDLIE  0x1
+
+/* RCR: */
+#define IT87_CIR_RCR_RDWOS  0x80
+#define IT87_CIR_RCR_HCFS   0x40
+#define IT87_CIR_RCR_RXEN   0x20
+#define IT87_CIR_RCR_RXEND  0x10
+#define IT87_CIR_RCR_RXACT  0x8
+#define IT87_CIR_RCR_RXDCR  0x7
+
+/* TCR1: */
+#define IT87_CIR_TCR1_FIFOCLR 0x80
+#define IT87_CIR_TCR1_ILE     0x40
+#define IT87_CIR_TCR1_FIFOTL  0x30
+#define IT87_CIR_TCR1_TXRLE   0x8
+#define IT87_CIR_TCR1_TXENDF  0x4
+#define IT87_CIR_TCR1_TXMPM   0x3
+
+/* TCR2: */
+#define IT87_CIR_TCR2_CFQ   0xf8
+#define IT87_CIR_TCR2_TXMPW 0x7
+
+/* TSR: */
+#define IT87_CIR_TSR_RESERVED 0xc0
+#define IT87_CIR_TSR_TXFBC    0x3f
+
+/* RSR: */
+#define IT87_CIR_RSR_RXFTO    0x80
+#define IT87_CIR_RSR_RESERVED 0x40
+#define IT87_CIR_RSR_RXFBC    0x3f
+
+/* IIR: */
+#define IT87_CIR_IIR_RESERVED 0xf8
+#define IT87_CIR_IIR_IID      0x6
+#define IT87_CIR_IIR_IIP      0x1
+
+/* TM: */
+#define IT87_CIR_TM_IL_SEL    0x80
+#define IT87_CIR_TM_RESERVED  0x40
+#define IT87_CIR_TM_TM_REG    0x3f
+
+#define IT87_CIR_FIFO_SIZE 32
+
+/* Baudratedivisor for IT87: power of 2: only 1,2,4 or 8) */
+#define IT87_CIR_BAUDRATE_DIVISOR 0x1
+#define IT87_CIR_DEFAULT_IOBASE 0x310
+#define IT87_CIR_DEFAULT_IRQ    0x7
+#define IT87_CIR_SPACE 0x00
+#define IT87_CIR_PULSE 0xff
+#define IT87_CIR_FREQ_MIN 27
+#define IT87_CIR_FREQ_MAX 58
+#define TIME_CONST (IT87_CIR_BAUDRATE_DIVISOR * 8000000ul / 115200ul)
+
+/********************************* ITE IT87xx ************************/
diff --git a/drivers/staging/lirc/lirc_ite8709.c b/drivers/staging/lirc/lirc_ite8709.c
new file mode 100644
index 00000000000..9352f45bbec
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ite8709.c
@@ -0,0 +1,542 @@
+/*
+ * LIRC driver for ITE8709 CIR port
+ *
+ * Copyright (C) 2008 Grégory Lardière <spmf2004-lirc@yahoo.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#define LIRC_DRIVER_NAME "lirc_ite8709"
+
+#define BUF_CHUNK_SIZE	sizeof(int)
+#define BUF_SIZE	(128*BUF_CHUNK_SIZE)
+
+/*
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the micro-controller.
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the communication
+ * protocol is not, so it was reverse-engineered.
+ */
+
+/* ITE8709 Registers addresses and values (reverse-engineered) */
+#define ITE8709_MODE		0x1a
+#define ITE8709_REG_ADR		0x1b
+#define ITE8709_REG_VAL		0x1c
+#define ITE8709_IIR		0x1e  /* Interrupt identification register */
+#define ITE8709_RFSR		0x1f  /* Receiver FIFO status register */
+#define ITE8709_FIFO_START	0x20
+
+#define ITE8709_MODE_READY	0X00
+#define ITE8709_MODE_WRITE	0X01
+#define ITE8709_MODE_READ	0X02
+#define ITE8709_IIR_RDAI	0x02  /* Receiver data available interrupt */
+#define ITE8709_IIR_RFOI	0x04  /* Receiver FIFO overrun interrupt */
+#define ITE8709_RFSR_MASK	0x3f  /* FIFO byte count mask */
+
+/*
+ * IT8512 CIR-module registers addresses and values
+ * (from IT8512 E/F specification v0.4.1)
+ */
+#define IT8512_REG_MSTCR	0x01  /* Master control register */
+#define IT8512_REG_IER		0x02  /* Interrupt enable register */
+#define IT8512_REG_CFR		0x04  /* Carrier frequency register */
+#define IT8512_REG_RCR		0x05  /* Receive control register */
+#define IT8512_REG_BDLR		0x08  /* Baud rate divisor low byte register */
+#define IT8512_REG_BDHR		0x09  /* Baud rate divisor high byte register */
+
+#define IT8512_MSTCR_RESET	0x01  /* Reset registers to default value */
+#define IT8512_MSTCR_FIFOCLR	0x02  /* Clear FIFO */
+#define IT8512_MSTCR_FIFOTL_7	0x04  /* FIFO threshold level : 7 */
+#define IT8512_MSTCR_FIFOTL_25	0x0c  /* FIFO threshold level : 25 */
+#define IT8512_IER_RDAIE	0x02  /* Enable data interrupt request */
+#define IT8512_IER_RFOIE	0x04  /* Enable FIFO overrun interrupt req */
+#define IT8512_IER_IEC		0x80  /* Enable interrupt request */
+#define IT8512_CFR_CF_36KHZ	0x09  /* Carrier freq : low speed, 36kHz */
+#define IT8512_RCR_RXDCR_1	0x01  /* Demodulation carrier range : 1 */
+#define IT8512_RCR_RXACT	0x08  /* Receiver active */
+#define IT8512_RCR_RXEN		0x80  /* Receiver enable */
+#define IT8512_BDR_6		6     /* Baud rate divisor : 6 */
+
+/* Actual values used by this driver */
+#define CFG_FIFOTL	IT8512_MSTCR_FIFOTL_25
+#define CFG_CR_FREQ	IT8512_CFR_CF_36KHZ
+#define CFG_DCR		IT8512_RCR_RXDCR_1
+#define CFG_BDR		IT8512_BDR_6
+#define CFG_TIMEOUT	100000 /* Rearm interrupt when a space is > 100 ms */
+
+static int debug;
+
+struct ite8709_device {
+	int use_count;
+	int io;
+	int irq;
+	spinlock_t hardware_lock;
+	unsigned long long acc_pulse;
+	unsigned long long acc_space;
+	char lastbit;
+	struct timeval last_tv;
+	struct lirc_driver driver;
+	struct tasklet_struct tasklet;
+	char force_rearm;
+	char rearmed;
+	char device_busy;
+};
+
+#define dprintk(fmt, args...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "	\
+				fmt, ## args);			\
+	} while (0)
+
+
+static unsigned char ite8709_read(struct ite8709_device *dev,
+					unsigned char port)
+{
+	outb(port, dev->io);
+	return inb(dev->io+1);
+}
+
+static void ite8709_write(struct ite8709_device *dev, unsigned char port,
+				unsigned char data)
+{
+	outb(port, dev->io);
+	outb(data, dev->io+1);
+}
+
+static void ite8709_wait_device(struct ite8709_device *dev)
+{
+	int i = 0;
+	/*
+	 * loop until device tells it's ready to continue
+	 * iterations count is usually ~750 but can sometimes achieve 13000
+	 */
+	for (i = 0; i < 15000; i++) {
+		udelay(2);
+		if (ite8709_read(dev, ITE8709_MODE) == ITE8709_MODE_READY)
+			break;
+	}
+}
+
+static void ite8709_write_register(struct ite8709_device *dev,
+				unsigned char reg_adr, unsigned char reg_value)
+{
+	ite8709_wait_device(dev);
+
+	ite8709_write(dev, ITE8709_REG_VAL, reg_value);
+	ite8709_write(dev, ITE8709_REG_ADR, reg_adr);
+	ite8709_write(dev, ITE8709_MODE, ITE8709_MODE_WRITE);
+}
+
+static void ite8709_init_hardware(struct ite8709_device *dev)
+{
+	spin_lock_irq(&dev->hardware_lock);
+	dev->device_busy = 1;
+	spin_unlock_irq(&dev->hardware_lock);
+
+	ite8709_write_register(dev, IT8512_REG_BDHR, (CFG_BDR >> 8) & 0xff);
+	ite8709_write_register(dev, IT8512_REG_BDLR, CFG_BDR & 0xff);
+	ite8709_write_register(dev, IT8512_REG_CFR, CFG_CR_FREQ);
+	ite8709_write_register(dev, IT8512_REG_IER,
+			IT8512_IER_IEC | IT8512_IER_RFOIE | IT8512_IER_RDAIE);
+	ite8709_write_register(dev, IT8512_REG_RCR, CFG_DCR);
+	ite8709_write_register(dev, IT8512_REG_MSTCR,
+					CFG_FIFOTL | IT8512_MSTCR_FIFOCLR);
+	ite8709_write_register(dev, IT8512_REG_RCR,
+				IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR);
+
+	spin_lock_irq(&dev->hardware_lock);
+	dev->device_busy = 0;
+	spin_unlock_irq(&dev->hardware_lock);
+
+	tasklet_enable(&dev->tasklet);
+}
+
+static void ite8709_drop_hardware(struct ite8709_device *dev)
+{
+	tasklet_disable(&dev->tasklet);
+
+	spin_lock_irq(&dev->hardware_lock);
+	dev->device_busy = 1;
+	spin_unlock_irq(&dev->hardware_lock);
+
+	ite8709_write_register(dev, IT8512_REG_RCR, 0);
+	ite8709_write_register(dev, IT8512_REG_MSTCR,
+				IT8512_MSTCR_RESET | IT8512_MSTCR_FIFOCLR);
+
+	spin_lock_irq(&dev->hardware_lock);
+	dev->device_busy = 0;
+	spin_unlock_irq(&dev->hardware_lock);
+}
+
+static int ite8709_set_use_inc(void *data)
+{
+	struct ite8709_device *dev;
+	dev = data;
+	if (dev->use_count == 0)
+		ite8709_init_hardware(dev);
+	dev->use_count++;
+	return 0;
+}
+
+static void ite8709_set_use_dec(void *data)
+{
+	struct ite8709_device *dev;
+	dev = data;
+	dev->use_count--;
+	if (dev->use_count == 0)
+		ite8709_drop_hardware(dev);
+}
+
+static void ite8709_add_read_queue(struct ite8709_device *dev, int flag,
+					unsigned long long val)
+{
+	int value;
+
+	dprintk("add a %llu usec %s\n", val, flag ? "pulse" : "space");
+
+	value = (val > PULSE_MASK) ? PULSE_MASK : val;
+	if (flag)
+		value |= PULSE_BIT;
+
+	if (!lirc_buffer_full(dev->driver.rbuf)) {
+		lirc_buffer_write(dev->driver.rbuf, (void *) &value);
+		wake_up(&dev->driver.rbuf->wait_poll);
+	}
+}
+
+static irqreturn_t ite8709_interrupt(int irq, void *dev_id)
+{
+	unsigned char data;
+	int iir, rfsr, i;
+	int fifo = 0;
+	char bit;
+	struct timeval curr_tv;
+
+	/* Bit duration in microseconds */
+	const unsigned long bit_duration = 1000000ul / (115200 / CFG_BDR);
+
+	struct ite8709_device *dev;
+	dev = dev_id;
+
+	/*
+	 * If device is busy, we simply discard data because we are in one of
+	 * these two cases : shutting down or rearming the device, so this
+	 * doesn't really matter and this avoids waiting too long in IRQ ctx
+	 */
+	spin_lock(&dev->hardware_lock);
+	if (dev->device_busy) {
+		spin_unlock(&dev->hardware_lock);
+		return IRQ_RETVAL(IRQ_HANDLED);
+	}
+
+	iir = ite8709_read(dev, ITE8709_IIR);
+
+	switch (iir) {
+	case ITE8709_IIR_RFOI:
+		dprintk("fifo overrun, scheduling forced rearm just in case\n");
+		dev->force_rearm = 1;
+		tasklet_schedule(&dev->tasklet);
+		spin_unlock(&dev->hardware_lock);
+		return IRQ_RETVAL(IRQ_HANDLED);
+
+	case ITE8709_IIR_RDAI:
+		rfsr = ite8709_read(dev, ITE8709_RFSR);
+		fifo = rfsr & ITE8709_RFSR_MASK;
+		if (fifo > 32)
+			fifo = 32;
+		dprintk("iir: 0x%x rfsr: 0x%x fifo: %d\n", iir, rfsr, fifo);
+
+		if (dev->rearmed) {
+			do_gettimeofday(&curr_tv);
+			dev->acc_space += 1000000ull
+				* (curr_tv.tv_sec - dev->last_tv.tv_sec)
+				+ (curr_tv.tv_usec - dev->last_tv.tv_usec);
+			dev->rearmed = 0;
+		}
+		for (i = 0; i < fifo; i++) {
+			data = ite8709_read(dev, i+ITE8709_FIFO_START);
+			data = ~data;
+			/* Loop through */
+			for (bit = 0; bit < 8; ++bit) {
+				if ((data >> bit) & 1) {
+					dev->acc_pulse += bit_duration;
+					if (dev->lastbit == 0) {
+						ite8709_add_read_queue(dev, 0,
+							dev->acc_space);
+						dev->acc_space = 0;
+					}
+				} else {
+					dev->acc_space += bit_duration;
+					if (dev->lastbit == 1) {
+						ite8709_add_read_queue(dev, 1,
+							dev->acc_pulse);
+						dev->acc_pulse = 0;
+					}
+				}
+				dev->lastbit = (data >> bit) & 1;
+			}
+		}
+		ite8709_write(dev, ITE8709_RFSR, 0);
+
+		if (dev->acc_space > CFG_TIMEOUT) {
+			dprintk("scheduling rearm IRQ\n");
+			do_gettimeofday(&dev->last_tv);
+			dev->force_rearm = 0;
+			tasklet_schedule(&dev->tasklet);
+		}
+
+		spin_unlock(&dev->hardware_lock);
+		return IRQ_RETVAL(IRQ_HANDLED);
+
+	default:
+		/* not our irq */
+		dprintk("unknown IRQ (shouldn't happen) !!\n");
+		spin_unlock(&dev->hardware_lock);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+}
+
+static void ite8709_rearm_irq(unsigned long data)
+{
+	struct ite8709_device *dev;
+	unsigned long flags;
+	dev = (struct ite8709_device *) data;
+
+	spin_lock_irqsave(&dev->hardware_lock, flags);
+	dev->device_busy = 1;
+	spin_unlock_irqrestore(&dev->hardware_lock, flags);
+
+	if (dev->force_rearm || dev->acc_space > CFG_TIMEOUT) {
+		dprintk("rearming IRQ\n");
+		ite8709_write_register(dev, IT8512_REG_RCR,
+						IT8512_RCR_RXACT | CFG_DCR);
+		ite8709_write_register(dev, IT8512_REG_MSTCR,
+					CFG_FIFOTL | IT8512_MSTCR_FIFOCLR);
+		ite8709_write_register(dev, IT8512_REG_RCR,
+				IT8512_RCR_RXEN | IT8512_RCR_RXACT | CFG_DCR);
+		if (!dev->force_rearm)
+			dev->rearmed = 1;
+		dev->force_rearm = 0;
+	}
+
+	spin_lock_irqsave(&dev->hardware_lock, flags);
+	dev->device_busy = 0;
+	spin_unlock_irqrestore(&dev->hardware_lock, flags);
+}
+
+static int ite8709_cleanup(struct ite8709_device *dev, int stage, int errno,
+				char *msg)
+{
+	if (msg != NULL)
+		printk(KERN_ERR LIRC_DRIVER_NAME ": %s\n", msg);
+
+	switch (stage) {
+	case 6:
+		if (dev->use_count > 0)
+			ite8709_drop_hardware(dev);
+	case 5:
+		free_irq(dev->irq, dev);
+	case 4:
+		release_region(dev->io, 2);
+	case 3:
+		lirc_unregister_driver(dev->driver.minor);
+	case 2:
+		lirc_buffer_free(dev->driver.rbuf);
+		kfree(dev->driver.rbuf);
+	case 1:
+		kfree(dev);
+	case 0:
+		;
+	}
+
+	return errno;
+}
+
+static int __devinit ite8709_pnp_probe(struct pnp_dev *dev,
+					const struct pnp_device_id *dev_id)
+{
+	struct lirc_driver *driver;
+	struct ite8709_device *ite8709_dev;
+	int ret;
+
+	/* Check resources validity */
+	if (!pnp_irq_valid(dev, 0))
+		return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IRQ");
+	if (!pnp_port_valid(dev, 2))
+		return ite8709_cleanup(NULL, 0, -ENODEV, "invalid IO port");
+
+	/* Allocate memory for device struct */
+	ite8709_dev = kzalloc(sizeof(struct ite8709_device), GFP_KERNEL);
+	if (ite8709_dev == NULL)
+		return ite8709_cleanup(NULL, 0, -ENOMEM, "kzalloc failed");
+	pnp_set_drvdata(dev, ite8709_dev);
+
+	/* Initialize device struct */
+	ite8709_dev->use_count = 0;
+	ite8709_dev->irq = pnp_irq(dev, 0);
+	ite8709_dev->io = pnp_port_start(dev, 2);
+	ite8709_dev->hardware_lock =
+		__SPIN_LOCK_UNLOCKED(ite8709_dev->hardware_lock);
+	ite8709_dev->acc_pulse = 0;
+	ite8709_dev->acc_space = 0;
+	ite8709_dev->lastbit = 0;
+	do_gettimeofday(&ite8709_dev->last_tv);
+	tasklet_init(&ite8709_dev->tasklet, ite8709_rearm_irq,
+							(long) ite8709_dev);
+	ite8709_dev->force_rearm = 0;
+	ite8709_dev->rearmed = 0;
+	ite8709_dev->device_busy = 0;
+
+	/* Initialize driver struct */
+	driver = &ite8709_dev->driver;
+	strcpy(driver->name, LIRC_DRIVER_NAME);
+	driver->minor = -1;
+	driver->code_length = sizeof(int) * 8;
+	driver->sample_rate = 0;
+	driver->features = LIRC_CAN_REC_MODE2;
+	driver->data = ite8709_dev;
+	driver->add_to_buf = NULL;
+	driver->set_use_inc = ite8709_set_use_inc;
+	driver->set_use_dec = ite8709_set_use_dec;
+	driver->dev = &dev->dev;
+	driver->owner = THIS_MODULE;
+
+	/* Initialize LIRC buffer */
+	driver->rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!driver->rbuf)
+		return ite8709_cleanup(ite8709_dev, 1, -ENOMEM,
+				       "can't allocate lirc_buffer");
+	if (lirc_buffer_init(driver->rbuf, BUF_CHUNK_SIZE, BUF_SIZE))
+		return ite8709_cleanup(ite8709_dev, 1, -ENOMEM,
+				       "lirc_buffer_init() failed");
+
+	/* Register LIRC driver */
+	ret = lirc_register_driver(driver);
+	if (ret < 0)
+		return ite8709_cleanup(ite8709_dev, 2, ret,
+					"lirc_register_driver() failed");
+
+	/* Reserve I/O port access */
+	if (!request_region(ite8709_dev->io, 2, LIRC_DRIVER_NAME))
+		return ite8709_cleanup(ite8709_dev, 3, -EBUSY,
+						"i/o port already in use");
+
+	/* Reserve IRQ line */
+	ret = request_irq(ite8709_dev->irq, ite8709_interrupt, 0,
+					LIRC_DRIVER_NAME, ite8709_dev);
+	if (ret < 0)
+		return ite8709_cleanup(ite8709_dev, 4, ret,
+						"IRQ already in use");
+
+	/* Initialize hardware */
+	ite8709_drop_hardware(ite8709_dev); /* Shutdown hw until first use */
+
+	printk(KERN_INFO LIRC_DRIVER_NAME ": device found : irq=%d io=0x%x\n",
+					ite8709_dev->irq, ite8709_dev->io);
+
+	return 0;
+}
+
+static void __devexit ite8709_pnp_remove(struct pnp_dev *dev)
+{
+	struct ite8709_device *ite8709_dev;
+	ite8709_dev = pnp_get_drvdata(dev);
+
+	ite8709_cleanup(ite8709_dev, 6, 0, NULL);
+
+	printk(KERN_INFO LIRC_DRIVER_NAME ": device removed\n");
+}
+
+#ifdef CONFIG_PM
+static int ite8709_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
+{
+	struct ite8709_device *ite8709_dev;
+	ite8709_dev = pnp_get_drvdata(dev);
+
+	if (ite8709_dev->use_count > 0)
+		ite8709_drop_hardware(ite8709_dev);
+
+	return 0;
+}
+
+static int ite8709_pnp_resume(struct pnp_dev *dev)
+{
+	struct ite8709_device *ite8709_dev;
+	ite8709_dev = pnp_get_drvdata(dev);
+
+	if (ite8709_dev->use_count > 0)
+		ite8709_init_hardware(ite8709_dev);
+
+	return 0;
+}
+#else
+#define ite8709_pnp_suspend NULL
+#define ite8709_pnp_resume NULL
+#endif
+
+static const struct pnp_device_id pnp_dev_table[] = {
+	{"ITE8709", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static struct pnp_driver ite8709_pnp_driver = {
+	.name           = LIRC_DRIVER_NAME,
+	.probe          = ite8709_pnp_probe,
+	.remove         = __devexit_p(ite8709_pnp_remove),
+	.suspend        = ite8709_pnp_suspend,
+	.resume         = ite8709_pnp_resume,
+	.id_table       = pnp_dev_table,
+};
+
+static int __init ite8709_init_module(void)
+{
+	return pnp_register_driver(&ite8709_pnp_driver);
+}
+module_init(ite8709_init_module);
+
+static void __exit ite8709_cleanup_module(void)
+{
+	pnp_unregister_driver(&ite8709_pnp_driver);
+}
+module_exit(ite8709_cleanup_module);
+
+MODULE_DESCRIPTION("LIRC driver for ITE8709 CIR port");
+MODULE_AUTHOR("Grégory Lardière");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c
new file mode 100644
index 00000000000..a1ebd071640
--- /dev/null
+++ b/drivers/staging/lirc/lirc_parallel.c
@@ -0,0 +1,705 @@
+/*
+ * lirc_parallel.c
+ *
+ * lirc_parallel - device driver for infra-red signal receiving and
+ *                 transmitting unit built by the author
+ *
+ * Copyright (C) 1998 Christoph Bartelmus <lirc@bartelmus.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*** Includes ***/
+
+#ifdef CONFIG_SMP
+#error "--- Sorry, this driver is not SMP safe. ---"
+#endif
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/time.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <linux/io.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+#include <linux/poll.h>
+#include <linux/parport.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#include "lirc_parallel.h"
+
+#define LIRC_DRIVER_NAME "lirc_parallel"
+
+#ifndef LIRC_IRQ
+#define LIRC_IRQ 7
+#endif
+#ifndef LIRC_PORT
+#define LIRC_PORT 0x378
+#endif
+#ifndef LIRC_TIMER
+#define LIRC_TIMER 65536
+#endif
+
+/*** Global Variables ***/
+
+static int debug;
+static int check_pselecd;
+
+unsigned int irq = LIRC_IRQ;
+unsigned int io = LIRC_PORT;
+#ifdef LIRC_TIMER
+unsigned int timer;
+unsigned int default_timer = LIRC_TIMER;
+#endif
+
+#define RBUF_SIZE (256) /* this must be a power of 2 larger than 1 */
+
+static int rbuf[RBUF_SIZE];
+
+DECLARE_WAIT_QUEUE_HEAD(lirc_wait);
+
+unsigned int rptr;
+unsigned int wptr;
+unsigned int lost_irqs;
+int is_open;
+
+struct parport *pport;
+struct pardevice *ppdevice;
+int is_claimed;
+
+unsigned int tx_mask = 1;
+
+/*** Internal Functions ***/
+
+static unsigned int in(int offset)
+{
+	switch (offset) {
+	case LIRC_LP_BASE:
+		return parport_read_data(pport);
+	case LIRC_LP_STATUS:
+		return parport_read_status(pport);
+	case LIRC_LP_CONTROL:
+		return parport_read_control(pport);
+	}
+	return 0; /* make compiler happy */
+}
+
+static void out(int offset, int value)
+{
+	switch (offset) {
+	case LIRC_LP_BASE:
+		parport_write_data(pport, value);
+		break;
+	case LIRC_LP_CONTROL:
+		parport_write_control(pport, value);
+		break;
+	case LIRC_LP_STATUS:
+		printk(KERN_INFO "%s: attempt to write to status register\n",
+		       LIRC_DRIVER_NAME);
+		break;
+	}
+}
+
+static unsigned int lirc_get_timer(void)
+{
+	return in(LIRC_PORT_TIMER) & LIRC_PORT_TIMER_BIT;
+}
+
+static unsigned int lirc_get_signal(void)
+{
+	return in(LIRC_PORT_SIGNAL) & LIRC_PORT_SIGNAL_BIT;
+}
+
+static void lirc_on(void)
+{
+	out(LIRC_PORT_DATA, tx_mask);
+}
+
+static void lirc_off(void)
+{
+	out(LIRC_PORT_DATA, 0);
+}
+
+static unsigned int init_lirc_timer(void)
+{
+	struct timeval tv, now;
+	unsigned int level, newlevel, timeelapsed, newtimer;
+	int count = 0;
+
+	do_gettimeofday(&tv);
+	tv.tv_sec++;                     /* wait max. 1 sec. */
+	level = lirc_get_timer();
+	do {
+		newlevel = lirc_get_timer();
+		if (level == 0 && newlevel != 0)
+			count++;
+		level = newlevel;
+		do_gettimeofday(&now);
+	} while (count < 1000 && (now.tv_sec < tv.tv_sec
+			     || (now.tv_sec == tv.tv_sec
+				 && now.tv_usec < tv.tv_usec)));
+
+	timeelapsed = ((now.tv_sec + 1 - tv.tv_sec)*1000000
+		     + (now.tv_usec - tv.tv_usec));
+	if (count >= 1000 && timeelapsed > 0) {
+		if (default_timer == 0) {
+			/* autodetect timer */
+			newtimer = (1000000*count)/timeelapsed;
+			printk(KERN_INFO "%s: %u Hz timer detected\n",
+			       LIRC_DRIVER_NAME, newtimer);
+			return newtimer;
+		}  else {
+			newtimer = (1000000*count)/timeelapsed;
+			if (abs(newtimer - default_timer) > default_timer/10) {
+				/* bad timer */
+				printk(KERN_NOTICE "%s: bad timer: %u Hz\n",
+				       LIRC_DRIVER_NAME, newtimer);
+				printk(KERN_NOTICE "%s: using default timer: "
+				       "%u Hz\n",
+				       LIRC_DRIVER_NAME, default_timer);
+				return default_timer;
+			} else {
+				printk(KERN_INFO "%s: %u Hz timer detected\n",
+				       LIRC_DRIVER_NAME, newtimer);
+				return newtimer; /* use detected value */
+			}
+		}
+	} else {
+		printk(KERN_NOTICE "%s: no timer detected\n", LIRC_DRIVER_NAME);
+		return 0;
+	}
+}
+
+static int lirc_claim(void)
+{
+	if (parport_claim(ppdevice) != 0) {
+		printk(KERN_WARNING "%s: could not claim port\n",
+		       LIRC_DRIVER_NAME);
+		printk(KERN_WARNING "%s: waiting for port becoming available"
+		       "\n", LIRC_DRIVER_NAME);
+		if (parport_claim_or_block(ppdevice) < 0) {
+			printk(KERN_NOTICE "%s: could not claim port, giving"
+			       " up\n", LIRC_DRIVER_NAME);
+			return 0;
+		}
+	}
+	out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+	is_claimed = 1;
+	return 1;
+}
+
+/*** interrupt handler ***/
+
+static void rbuf_write(int signal)
+{
+	unsigned int nwptr;
+
+	nwptr = (wptr + 1) & (RBUF_SIZE - 1);
+	if (nwptr == rptr) {
+		/* no new signals will be accepted */
+		lost_irqs++;
+		printk(KERN_NOTICE "%s: buffer overrun\n", LIRC_DRIVER_NAME);
+		return;
+	}
+	rbuf[wptr] = signal;
+	wptr = nwptr;
+}
+
+static void irq_handler(void *blah)
+{
+	struct timeval tv;
+	static struct timeval lasttv;
+	static int init;
+	long signal;
+	int data;
+	unsigned int level, newlevel;
+	unsigned int timeout;
+
+	if (!module_refcount(THIS_MODULE))
+		return;
+
+	if (!is_claimed)
+		return;
+
+#if 0
+	/* disable interrupt */
+	  disable_irq(irq);
+	  out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ) & (~LP_PINTEN));
+#endif
+	if (check_pselecd && (in(1) & LP_PSELECD))
+		return;
+
+#ifdef LIRC_TIMER
+	if (init) {
+		do_gettimeofday(&tv);
+
+		signal = tv.tv_sec - lasttv.tv_sec;
+		if (signal > 15)
+			/* really long time */
+			data = PULSE_MASK;
+		else
+			data = (int) (signal*1000000 +
+					 tv.tv_usec - lasttv.tv_usec +
+					 LIRC_SFH506_DELAY);
+
+		rbuf_write(data); /* space */
+	} else {
+		if (timer == 0) {
+			/*
+			 * wake up; we'll lose this signal, but it will be
+			 * garbage if the device is turned on anyway
+			 */
+			timer = init_lirc_timer();
+			/* enable_irq(irq); */
+			return;
+		}
+		init = 1;
+	}
+
+	timeout = timer/10;	/* timeout after 1/10 sec. */
+	signal = 1;
+	level = lirc_get_timer();
+	do {
+		newlevel = lirc_get_timer();
+		if (level == 0 && newlevel != 0)
+			signal++;
+		level = newlevel;
+
+		/* giving up */
+		if (signal > timeout
+		    || (check_pselecd && (in(1) & LP_PSELECD))) {
+			signal = 0;
+			printk(KERN_NOTICE "%s: timeout\n", LIRC_DRIVER_NAME);
+			break;
+		}
+	} while (lirc_get_signal());
+
+	if (signal != 0) {
+		/* ajust value to usecs */
+		unsigned long long helper;
+
+		helper = ((unsigned long long) signal)*1000000;
+		do_div(helper, timer);
+		signal = (long) helper;
+
+		if (signal > LIRC_SFH506_DELAY)
+			data = signal - LIRC_SFH506_DELAY;
+		else
+			data = 1;
+		rbuf_write(PULSE_BIT|data); /* pulse */
+	}
+	do_gettimeofday(&lasttv);
+#else
+	/* add your code here */
+#endif
+
+	wake_up_interruptible(&lirc_wait);
+
+	/* enable interrupt */
+	/*
+	  enable_irq(irq);
+	  out(LIRC_PORT_IRQ, in(LIRC_PORT_IRQ)|LP_PINTEN);
+	*/
+}
+
+/*** file operations ***/
+
+static loff_t lirc_lseek(struct file *filep, loff_t offset, int orig)
+{
+	return -ESPIPE;
+}
+
+static ssize_t lirc_read(struct file *filep, char *buf, size_t n, loff_t *ppos)
+{
+	int result = 0;
+	int count = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	if (n % sizeof(int))
+		return -EINVAL;
+
+	add_wait_queue(&lirc_wait, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (count < n) {
+		if (rptr != wptr) {
+			if (copy_to_user(buf+count, (char *) &rbuf[rptr],
+					 sizeof(int))) {
+				result = -EFAULT;
+				break;
+			}
+			rptr = (rptr + 1) & (RBUF_SIZE - 1);
+			count += sizeof(int);
+		} else {
+			if (filep->f_flags & O_NONBLOCK) {
+				result = -EAGAIN;
+				break;
+			}
+			if (signal_pending(current)) {
+				result = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+		}
+	}
+	remove_wait_queue(&lirc_wait, &wait);
+	set_current_state(TASK_RUNNING);
+	return count ? count : result;
+}
+
+static ssize_t lirc_write(struct file *filep, const char *buf, size_t n,
+			  loff_t *ppos)
+{
+	int count;
+	unsigned int i;
+	unsigned int level, newlevel;
+	unsigned long flags;
+	int counttimer;
+	int *wbuf;
+
+	if (!is_claimed)
+		return -EBUSY;
+
+	count = n / sizeof(int);
+
+	if (n % sizeof(int) || count % 2 == 0)
+		return -EINVAL;
+
+	wbuf = memdup_user(buf, n);
+	if (IS_ERR(wbuf))
+		return PTR_ERR(wbuf);
+
+#ifdef LIRC_TIMER
+	if (timer == 0) {
+		/* try again if device is ready */
+		timer = init_lirc_timer();
+		if (timer == 0)
+			return -EIO;
+	}
+
+	/* adjust values from usecs */
+	for (i = 0; i < count; i++) {
+		unsigned long long helper;
+
+		helper = ((unsigned long long) wbuf[i])*timer;
+		do_div(helper, 1000000);
+		wbuf[i] = (int) helper;
+	}
+
+	local_irq_save(flags);
+	i = 0;
+	while (i < count) {
+		level = lirc_get_timer();
+		counttimer = 0;
+		lirc_on();
+		do {
+			newlevel = lirc_get_timer();
+			if (level == 0 && newlevel != 0)
+				counttimer++;
+			level = newlevel;
+			if (check_pselecd && (in(1) & LP_PSELECD)) {
+				lirc_off();
+				local_irq_restore(flags);
+				return -EIO;
+			}
+		} while (counttimer < wbuf[i]);
+		i++;
+
+		lirc_off();
+		if (i == count)
+			break;
+		counttimer = 0;
+		do {
+			newlevel = lirc_get_timer();
+			if (level == 0 && newlevel != 0)
+				counttimer++;
+			level = newlevel;
+			if (check_pselecd && (in(1) & LP_PSELECD)) {
+				local_irq_restore(flags);
+				return -EIO;
+			}
+		} while (counttimer < wbuf[i]);
+		i++;
+	}
+	local_irq_restore(flags);
+#else
+	/* place code that handles write without external timer here */
+#endif
+	return n;
+}
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &lirc_wait, wait);
+	if (rptr != wptr)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	int result;
+	unsigned long features = LIRC_CAN_SET_TRANSMITTER_MASK |
+				 LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2;
+	unsigned long mode;
+	unsigned int ivalue;
+
+	switch (cmd) {
+	case LIRC_GET_FEATURES:
+		result = put_user(features, (unsigned long *) arg);
+		if (result)
+			return result;
+		break;
+	case LIRC_GET_SEND_MODE:
+		result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg);
+		if (result)
+			return result;
+		break;
+	case LIRC_GET_REC_MODE:
+		result = put_user(LIRC_MODE_MODE2, (unsigned long *) arg);
+		if (result)
+			return result;
+		break;
+	case LIRC_SET_SEND_MODE:
+		result = get_user(mode, (unsigned long *) arg);
+		if (result)
+			return result;
+		if (mode != LIRC_MODE_PULSE)
+			return -EINVAL;
+		break;
+	case LIRC_SET_REC_MODE:
+		result = get_user(mode, (unsigned long *) arg);
+		if (result)
+			return result;
+		if (mode != LIRC_MODE_MODE2)
+			return -ENOSYS;
+		break;
+	case LIRC_SET_TRANSMITTER_MASK:
+		result = get_user(ivalue, (unsigned int *) arg);
+		if (result)
+			return result;
+		if ((ivalue & LIRC_PARALLEL_TRANSMITTER_MASK) != ivalue)
+			return LIRC_PARALLEL_MAX_TRANSMITTERS;
+		tx_mask = ivalue;
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int lirc_open(struct inode *node, struct file *filep)
+{
+	if (module_refcount(THIS_MODULE) || !lirc_claim())
+		return -EBUSY;
+
+	parport_enable_irq(pport);
+
+	/* init read ptr */
+	rptr = 0;
+	wptr = 0;
+	lost_irqs = 0;
+
+	is_open = 1;
+	return 0;
+}
+
+static int lirc_close(struct inode *node, struct file *filep)
+{
+	if (is_claimed) {
+		is_claimed = 0;
+		parport_release(ppdevice);
+	}
+	is_open = 0;
+	return 0;
+}
+
+static const struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= lirc_lseek,
+	.read		= lirc_read,
+	.write		= lirc_write,
+	.poll		= lirc_poll,
+	.unlocked_ioctl	= lirc_ioctl,
+	.open		= lirc_open,
+	.release	= lirc_close
+};
+
+static int set_use_inc(void *data)
+{
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+       .name		= LIRC_DRIVER_NAME,
+       .minor		= -1,
+       .code_length	= 1,
+       .sample_rate	= 0,
+       .data		= NULL,
+       .add_to_buf	= NULL,
+       .set_use_inc	= set_use_inc,
+       .set_use_dec	= set_use_dec,
+       .fops		= &lirc_fops,
+       .dev		= NULL,
+       .owner		= THIS_MODULE,
+};
+
+static int pf(void *handle);
+static void kf(void *handle);
+
+static struct timer_list poll_timer;
+static void poll_state(unsigned long ignored);
+
+static void poll_state(unsigned long ignored)
+{
+	printk(KERN_NOTICE "%s: time\n",
+	       LIRC_DRIVER_NAME);
+	del_timer(&poll_timer);
+	if (is_claimed)
+		return;
+	kf(NULL);
+	if (!is_claimed) {
+		printk(KERN_NOTICE "%s: could not claim port, giving up\n",
+		       LIRC_DRIVER_NAME);
+		init_timer(&poll_timer);
+		poll_timer.expires = jiffies + HZ;
+		poll_timer.data = (unsigned long)current;
+		poll_timer.function = poll_state;
+		add_timer(&poll_timer);
+	}
+}
+
+static int pf(void *handle)
+{
+	parport_disable_irq(pport);
+	is_claimed = 0;
+	return 0;
+}
+
+static void kf(void *handle)
+{
+	if (!is_open)
+		return;
+	if (!lirc_claim())
+		return;
+	parport_enable_irq(pport);
+	lirc_off();
+	/* this is a bit annoying when you actually print...*/
+	/*
+	printk(KERN_INFO "%s: reclaimed port\n", LIRC_DRIVER_NAME);
+	*/
+}
+
+/*** module initialization and cleanup ***/
+
+static int __init lirc_parallel_init(void)
+{
+	pport = parport_find_base(io);
+	if (pport == NULL) {
+		printk(KERN_NOTICE "%s: no port at %x found\n",
+		       LIRC_DRIVER_NAME, io);
+		return -ENXIO;
+	}
+	ppdevice = parport_register_device(pport, LIRC_DRIVER_NAME,
+					   pf, kf, irq_handler, 0, NULL);
+	parport_put_port(pport);
+	if (ppdevice == NULL) {
+		printk(KERN_NOTICE "%s: parport_register_device() failed\n",
+		       LIRC_DRIVER_NAME);
+		return -ENXIO;
+	}
+	if (parport_claim(ppdevice) != 0)
+		goto skip_init;
+	is_claimed = 1;
+	out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+
+#ifdef LIRC_TIMER
+	if (debug)
+		out(LIRC_PORT_DATA, tx_mask);
+
+	timer = init_lirc_timer();
+
+#if 0	/* continue even if device is offline */
+	if (timer == 0) {
+		is_claimed = 0;
+		parport_release(pport);
+		parport_unregister_device(ppdevice);
+		return -EIO;
+	}
+
+#endif
+	if (debug)
+		out(LIRC_PORT_DATA, 0);
+#endif
+
+	is_claimed = 0;
+	parport_release(ppdevice);
+ skip_init:
+	driver.minor = lirc_register_driver(&driver);
+	if (driver.minor < 0) {
+		printk(KERN_NOTICE "%s: register_chrdev() failed\n",
+		       LIRC_DRIVER_NAME);
+		parport_unregister_device(ppdevice);
+		return -EIO;
+	}
+	printk(KERN_INFO "%s: installed using port 0x%04x irq %d\n",
+	       LIRC_DRIVER_NAME, io, irq);
+	return 0;
+}
+
+static void __exit lirc_parallel_exit(void)
+{
+	parport_unregister_device(ppdevice);
+	lirc_unregister_driver(driver.minor);
+}
+
+module_init(lirc_parallel_init);
+module_exit(lirc_parallel_exit);
+
+MODULE_DESCRIPTION("Infrared receiver driver for parallel ports.");
+MODULE_AUTHOR("Christoph Bartelmus");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3bc, 0x378 or 0x278)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (7 or 5)");
+
+module_param(tx_mask, int, S_IRUGO);
+MODULE_PARM_DESC(tx_maxk, "Transmitter mask (default: 0x01)");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(check_pselecd, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Check for printer (default: 0)");
diff --git a/drivers/staging/lirc/lirc_parallel.h b/drivers/staging/lirc/lirc_parallel.h
new file mode 100644
index 00000000000..4bed6afe063
--- /dev/null
+++ b/drivers/staging/lirc/lirc_parallel.h
@@ -0,0 +1,26 @@
+/* lirc_parallel.h */
+
+#ifndef _LIRC_PARALLEL_H
+#define _LIRC_PARALLEL_H
+
+#include <linux/lp.h>
+
+#define LIRC_PORT_LEN 3
+
+#define LIRC_LP_BASE    0
+#define LIRC_LP_STATUS  1
+#define LIRC_LP_CONTROL 2
+
+#define LIRC_PORT_DATA           LIRC_LP_BASE    /* base */
+#define LIRC_PORT_TIMER        LIRC_LP_STATUS    /* status port */
+#define LIRC_PORT_TIMER_BIT          LP_PBUSY    /* busy signal */
+#define LIRC_PORT_SIGNAL       LIRC_LP_STATUS    /* status port */
+#define LIRC_PORT_SIGNAL_BIT          LP_PACK    /* ack signal */
+#define LIRC_PORT_IRQ         LIRC_LP_CONTROL    /* control port */
+
+#define LIRC_SFH506_DELAY 0             /* delay t_phl in usecs */
+
+#define LIRC_PARALLEL_MAX_TRANSMITTERS 8
+#define LIRC_PARALLEL_TRANSMITTER_MASK ((1<<LIRC_PARALLEL_MAX_TRANSMITTERS) - 1)
+
+#endif
diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/lirc/lirc_sasem.c
new file mode 100644
index 00000000000..73166c3f581
--- /dev/null
+++ b/drivers/staging/lirc/lirc_sasem.c
@@ -0,0 +1,933 @@
+/*
+ * lirc_sasem.c - USB remote support for LIRC
+ * Version 0.5
+ *
+ * Copyright (C) 2004-2005 Oliver Stabel <oliver.stabel@gmx.de>
+ *			 Tim Davies <tim@opensystems.net.au>
+ *
+ * This driver was derived from:
+ *   Venky Raju <dev@venky.ws>
+ *      "lirc_imon - "LIRC/VFD driver for Ahanix/Soundgraph IMON IR/VFD"
+ *   Paul Miller <pmiller9@users.sourceforge.net>'s 2003-2004
+ *      "lirc_atiusb - USB remote support for LIRC"
+ *   Culver Consulting Services <henry@culcon.com>'s 2003
+ *      "Sasem OnAir VFD/IR USB driver"
+ *
+ *
+ * NOTE - The LCDproc iMon driver should work with this module.  More info at
+ *	http://www.frogstorm.info/sasem
+ */
+
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+#define MOD_AUTHOR	"Oliver Stabel <oliver.stabel@gmx.de>, " \
+			"Tim Davies <tim@opensystems.net.au>"
+#define MOD_DESC	"USB Driver for Sasem Remote Controller V1.1"
+#define MOD_NAME	"lirc_sasem"
+#define MOD_VERSION	"0.5"
+
+#define VFD_MINOR_BASE	144	/* Same as LCD */
+#define DEVICE_NAME	"lcd%d"
+
+#define BUF_CHUNK_SIZE	8
+#define BUF_SIZE	128
+
+#define IOCTL_LCD_CONTRAST 1
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int sasem_probe(struct usb_interface *interface,
+			const struct usb_device_id *id);
+static void sasem_disconnect(struct usb_interface *interface);
+static void usb_rx_callback(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* VFD file_operations function prototypes */
+static int vfd_open(struct inode *inode, struct file *file);
+static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg);
+static int vfd_close(struct inode *inode, struct file *file);
+static ssize_t vfd_write(struct file *file, const char *buf,
+				size_t n_bytes, loff_t *pos);
+
+/* LIRC driver function prototypes */
+static int ir_open(void *data);
+static void ir_close(void *data);
+
+/* Driver init/exit prototypes */
+static int __init sasem_init(void);
+static void __exit sasem_exit(void);
+
+/*** G L O B A L S ***/
+#define SASEM_DATA_BUF_SZ	32
+
+struct sasem_context {
+
+	struct usb_device *dev;
+	int vfd_isopen;			/* VFD port has been opened       */
+	unsigned int vfd_contrast;	/* VFD contrast		   */
+	int ir_isopen;			/* IR port has been opened	*/
+	int dev_present;		/* USB device presence	    */
+	struct mutex ctx_lock;		/* to lock this object	    */
+	wait_queue_head_t remove_ok;	/* For unexpected USB disconnects */
+
+	struct lirc_driver *driver;
+	struct usb_endpoint_descriptor *rx_endpoint;
+	struct usb_endpoint_descriptor *tx_endpoint;
+	struct urb *rx_urb;
+	struct urb *tx_urb;
+	unsigned char usb_rx_buf[8];
+	unsigned char usb_tx_buf[8];
+
+	struct tx_t {
+		unsigned char data_buf[SASEM_DATA_BUF_SZ]; /* user data buffer */
+		struct completion finished;  /* wait for write to finish  */
+		atomic_t busy;		     /* write in progress	 */
+		int status;		     /* status of tx completion   */
+	} tx;
+
+	/* for dealing with repeat codes (wish there was a toggle bit!) */
+	struct timeval presstime;
+	char lastcode[8];
+	int codesaved;
+};
+
+/* VFD file operations */
+static const struct file_operations vfd_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &vfd_open,
+	.write		= &vfd_write,
+	.unlocked_ioctl	= &vfd_ioctl,
+	.release	= &vfd_close,
+};
+
+/* USB Device ID for Sasem USB Control Board */
+static struct usb_device_id sasem_usb_id_table[] = {
+	/* Sasem USB Control Board */
+	{ USB_DEVICE(0x11ba, 0x0101) },
+	/* Terminating entry */
+	{}
+};
+
+/* USB Device data */
+static struct usb_driver sasem_driver = {
+	.name		= MOD_NAME,
+	.probe		= sasem_probe,
+	.disconnect	= sasem_disconnect,
+	.id_table	= sasem_usb_id_table,
+};
+
+static struct usb_class_driver sasem_class = {
+	.name		= DEVICE_NAME,
+	.fops		= &vfd_fops,
+	.minor_base	= VFD_MINOR_BASE,
+};
+
+/* to prevent races between open() and disconnect() */
+static DEFINE_MUTEX(disconnect_lock);
+
+static int debug;
+
+
+/*** M O D U L E   C O D E ***/
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_LICENSE("GPL");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
+
+static void delete_context(struct sasem_context *context)
+{
+	usb_free_urb(context->tx_urb);  /* VFD */
+	usb_free_urb(context->rx_urb);  /* IR */
+	lirc_buffer_free(context->driver->rbuf);
+	kfree(context->driver->rbuf);
+	kfree(context->driver);
+	kfree(context);
+
+	if (debug)
+		printk(KERN_INFO "%s: context deleted\n", __func__);
+}
+
+static void deregister_from_lirc(struct sasem_context *context)
+{
+	int retval;
+	int minor = context->driver->minor;
+
+	retval = lirc_unregister_driver(minor);
+	if (retval)
+		err("%s: unable to deregister from lirc (%d)",
+			__func__, retval);
+	else
+		printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n",
+		       minor);
+
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is opened by the application.
+ */
+static int vfd_open(struct inode *inode, struct file *file)
+{
+	struct usb_interface *interface;
+	struct sasem_context *context = NULL;
+	int subminor;
+	int retval = 0;
+
+	/* prevent races with disconnect */
+	mutex_lock(&disconnect_lock);
+
+	subminor = iminor(inode);
+	interface = usb_find_interface(&sasem_driver, subminor);
+	if (!interface) {
+		err("%s: could not find interface for minor %d",
+		    __func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+	context = usb_get_intfdata(interface);
+
+	if (!context) {
+		err("%s: no context found for minor %d",
+					__func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (context->vfd_isopen) {
+		err("%s: VFD port is already open", __func__);
+		retval = -EBUSY;
+	} else {
+		context->vfd_isopen = 1;
+		file->private_data = context;
+		printk(KERN_INFO "VFD port opened\n");
+	}
+
+	mutex_unlock(&context->ctx_lock);
+
+exit:
+	mutex_unlock(&disconnect_lock);
+	return retval;
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is closed by the application.
+ */
+static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+	struct sasem_context *context = NULL;
+
+	context = (struct sasem_context *) file->private_data;
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	switch (cmd) {
+	case IOCTL_LCD_CONTRAST:
+		if (arg > 1000)
+			arg = 1000;
+		context->vfd_contrast = (unsigned int)arg;
+		break;
+	default:
+		printk(KERN_INFO "Unknown IOCTL command\n");
+		mutex_unlock(&context->ctx_lock);
+		return -ENOIOCTLCMD;  /* not supported */
+	}
+
+	mutex_unlock(&context->ctx_lock);
+	return 0;
+}
+
+/**
+ * Called when the VFD device (e.g. /dev/usb/lcd)
+ * is closed by the application.
+ */
+static int vfd_close(struct inode *inode, struct file *file)
+{
+	struct sasem_context *context = NULL;
+	int retval = 0;
+
+	context = (struct sasem_context *) file->private_data;
+
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (!context->vfd_isopen) {
+		err("%s: VFD is not open", __func__);
+		retval = -EIO;
+	} else {
+		context->vfd_isopen = 0;
+		printk(KERN_INFO "VFD port closed\n");
+		if (!context->dev_present && !context->ir_isopen) {
+
+			/* Device disconnected before close and IR port is
+			 * not open. If IR port is open, context will be
+			 * deleted by ir_close. */
+			mutex_unlock(&context->ctx_lock);
+			delete_context(context);
+			return retval;
+		}
+	}
+
+	mutex_unlock(&context->ctx_lock);
+	return retval;
+}
+
+/**
+ * Sends a packet to the VFD.
+ */
+static int send_packet(struct sasem_context *context)
+{
+	unsigned int pipe;
+	int interval = 0;
+	int retval = 0;
+
+	pipe = usb_sndintpipe(context->dev,
+			context->tx_endpoint->bEndpointAddress);
+	interval = context->tx_endpoint->bInterval;
+
+	usb_fill_int_urb(context->tx_urb, context->dev, pipe,
+		context->usb_tx_buf, sizeof(context->usb_tx_buf),
+		usb_tx_callback, context, interval);
+
+	context->tx_urb->actual_length = 0;
+
+	init_completion(&context->tx.finished);
+	atomic_set(&(context->tx.busy), 1);
+
+	retval =  usb_submit_urb(context->tx_urb, GFP_KERNEL);
+	if (retval) {
+		atomic_set(&(context->tx.busy), 0);
+		err("%s: error submitting urb (%d)", __func__, retval);
+	} else {
+		/* Wait for transmission to complete (or abort) */
+		mutex_unlock(&context->ctx_lock);
+		wait_for_completion(&context->tx.finished);
+		mutex_lock(&context->ctx_lock);
+
+		retval = context->tx.status;
+		if (retval)
+			err("%s: packet tx failed (%d)", __func__, retval);
+	}
+
+	return retval;
+}
+
+/**
+ * Writes data to the VFD.  The Sasem VFD is 2x16 characters
+ * and requires data in 9 consecutive USB interrupt packets,
+ * each packet carrying 8 bytes.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+				size_t n_bytes, loff_t *pos)
+{
+	int i;
+	int retval = 0;
+	struct sasem_context *context;
+	int *data_buf;
+
+	context = (struct sasem_context *) file->private_data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return -ENODEV;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	if (!context->dev_present) {
+		err("%s: no Sasem device present", __func__);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) {
+		err("%s: invalid payload size", __func__);
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	data_buf = memdup_user(buf, n_bytes);
+	if (PTR_ERR(data_buf))
+		return PTR_ERR(data_buf);
+
+	memcpy(context->tx.data_buf, data_buf, n_bytes);
+
+	/* Pad with spaces */
+	for (i = n_bytes; i < SASEM_DATA_BUF_SZ; ++i)
+		context->tx.data_buf[i] = ' ';
+
+	/* Nine 8 byte packets to be sent */
+	/* NOTE: "\x07\x01\0\0\0\0\0\0" or "\x0c\0\0\0\0\0\0\0"
+	 *       will clear the VFD */
+	for (i = 0; i < 9; i++) {
+		switch (i) {
+		case 0:
+			memcpy(context->usb_tx_buf, "\x07\0\0\0\0\0\0\0", 8);
+			context->usb_tx_buf[1] = (context->vfd_contrast) ?
+				(0x2B - (context->vfd_contrast - 1) / 250)
+				: 0x2B;
+			break;
+		case 1:
+			memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8);
+			break;
+		case 2:
+			memcpy(context->usb_tx_buf, "\x0b\x01\0\0\0\0\0\0", 8);
+			break;
+		case 3:
+			memcpy(context->usb_tx_buf, context->tx.data_buf, 8);
+			break;
+		case 4:
+			memcpy(context->usb_tx_buf,
+			       context->tx.data_buf + 8, 8);
+			break;
+		case 5:
+			memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8);
+			break;
+		case 6:
+			memcpy(context->usb_tx_buf, "\x0b\x02\0\0\0\0\0\0", 8);
+			break;
+		case 7:
+			memcpy(context->usb_tx_buf,
+			       context->tx.data_buf + 16, 8);
+			break;
+		case 8:
+			memcpy(context->usb_tx_buf,
+			       context->tx.data_buf + 24, 8);
+			break;
+		}
+		retval = send_packet(context);
+		if (retval) {
+
+			err("%s: send packet failed for packet #%d",
+					__func__, i);
+			goto exit;
+		}
+	}
+exit:
+
+	mutex_unlock(&context->ctx_lock);
+
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+	struct sasem_context *context;
+
+	if (!urb)
+		return;
+	context = (struct sasem_context *) urb->context;
+	if (!context)
+		return;
+
+	context->tx.status = urb->status;
+
+	/* notify waiters that write has finished */
+	atomic_set(&context->tx.busy, 0);
+	complete(&context->tx.finished);
+
+	return;
+}
+
+/**
+ * Called by lirc_dev when the application opens /dev/lirc
+ */
+static int ir_open(void *data)
+{
+	int retval = 0;
+	struct sasem_context *context;
+
+	/* prevent races with disconnect */
+	mutex_lock(&disconnect_lock);
+
+	context = (struct sasem_context *) data;
+
+	mutex_lock(&context->ctx_lock);
+
+	if (context->ir_isopen) {
+		err("%s: IR port is already open", __func__);
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	usb_fill_int_urb(context->rx_urb, context->dev,
+		usb_rcvintpipe(context->dev,
+				context->rx_endpoint->bEndpointAddress),
+		context->usb_rx_buf, sizeof(context->usb_rx_buf),
+		usb_rx_callback, context, context->rx_endpoint->bInterval);
+
+	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
+
+	if (retval)
+		err("%s: usb_submit_urb failed for ir_open (%d)",
+		    __func__, retval);
+	else {
+		context->ir_isopen = 1;
+		printk(KERN_INFO "IR port opened\n");
+	}
+
+exit:
+	mutex_unlock(&context->ctx_lock);
+
+	mutex_unlock(&disconnect_lock);
+	return 0;
+}
+
+/**
+ * Called by lirc_dev when the application closes /dev/lirc
+ */
+static void ir_close(void *data)
+{
+	struct sasem_context *context;
+
+	context = (struct sasem_context *)data;
+	if (!context) {
+		err("%s: no context for device", __func__);
+		return;
+	}
+
+	mutex_lock(&context->ctx_lock);
+
+	usb_kill_urb(context->rx_urb);
+	context->ir_isopen = 0;
+	printk(KERN_INFO "IR port closed\n");
+
+	if (!context->dev_present) {
+
+		/*
+		 * Device disconnected while IR port was
+		 * still open. Driver was not deregistered
+		 * at disconnect time, so do it now.
+		 */
+		deregister_from_lirc(context);
+
+		if (!context->vfd_isopen) {
+
+			mutex_unlock(&context->ctx_lock);
+			delete_context(context);
+			return;
+		}
+		/* If VFD port is open, context will be deleted by vfd_close */
+	}
+
+	mutex_unlock(&context->ctx_lock);
+	return;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void incoming_packet(struct sasem_context *context,
+				   struct urb *urb)
+{
+	int len = urb->actual_length;
+	unsigned char *buf = urb->transfer_buffer;
+	long ms;
+	struct timeval tv;
+
+	if (len != 8) {
+		printk(KERN_WARNING "%s: invalid incoming packet size (%d)\n",
+		     __func__, len);
+		return;
+	}
+
+#ifdef DEBUG
+	int i;
+	for (i = 0; i < 8; ++i)
+		printk(KERN_INFO "%02x ", buf[i]);
+	printk(KERN_INFO "\n");
+#endif
+
+	/*
+	 * Lirc could deal with the repeat code, but we really need to block it
+	 * if it arrives too late.  Otherwise we could repeat the wrong code.
+	 */
+
+	/* get the time since the last button press */
+	do_gettimeofday(&tv);
+	ms = (tv.tv_sec - context->presstime.tv_sec) * 1000 +
+	     (tv.tv_usec - context->presstime.tv_usec) / 1000;
+
+	if (memcmp(buf, "\x08\0\0\0\0\0\0\0", 8) == 0) {
+		/*
+		 * the repeat code is being sent, so we copy
+		 * the old code to LIRC
+		 */
+
+		/*
+		 * NOTE: Only if the last code was less than 250ms ago
+		 * - no one should be able to push another (undetected) button
+		 *   in that time and then get a false repeat of the previous
+		 *   press but it is long enough for a genuine repeat
+		 */
+		if ((ms < 250) && (context->codesaved != 0)) {
+			memcpy(buf, &context->lastcode, 8);
+			context->presstime.tv_sec = tv.tv_sec;
+			context->presstime.tv_usec = tv.tv_usec;
+		}
+	} else {
+		/* save the current valid code for repeats */
+		memcpy(&context->lastcode, buf, 8);
+		/*
+		 * set flag to signal a valid code was save;
+		 * just for safety reasons
+		 */
+		context->codesaved = 1;
+		context->presstime.tv_sec = tv.tv_sec;
+		context->presstime.tv_usec = tv.tv_usec;
+	}
+
+	lirc_buffer_write(context->driver->rbuf, buf);
+	wake_up(&context->driver->rbuf->wait_poll);
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback(struct urb *urb)
+{
+	struct sasem_context *context;
+
+	if (!urb)
+		return;
+	context = (struct sasem_context *) urb->context;
+	if (!context)
+		return;
+
+	switch (urb->status) {
+
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case 0:
+		if (context->ir_isopen)
+			incoming_packet(context, urb);
+		break;
+
+	default:
+		printk(KERN_WARNING "%s: status (%d): ignored",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(context->rx_urb, GFP_ATOMIC);
+	return;
+}
+
+
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int sasem_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	struct usb_device *dev = NULL;
+	struct usb_host_interface *iface_desc = NULL;
+	struct usb_endpoint_descriptor *rx_endpoint = NULL;
+	struct usb_endpoint_descriptor *tx_endpoint = NULL;
+	struct urb *rx_urb = NULL;
+	struct urb *tx_urb = NULL;
+	struct lirc_driver *driver = NULL;
+	struct lirc_buffer *rbuf = NULL;
+	int lirc_minor = 0;
+	int num_endpoints;
+	int retval = 0;
+	int vfd_ep_found;
+	int ir_ep_found;
+	int alloc_status;
+	struct sasem_context *context = NULL;
+	int i;
+
+	printk(KERN_INFO "%s: found Sasem device\n", __func__);
+
+
+	dev = usb_get_dev(interface_to_usbdev(interface));
+	iface_desc = interface->cur_altsetting;
+	num_endpoints = iface_desc->desc.bNumEndpoints;
+
+	/*
+	 * Scan the endpoint list and set:
+	 *	first input endpoint = IR endpoint
+	 *	first output endpoint = VFD endpoint
+	 */
+
+	ir_ep_found = 0;
+	vfd_ep_found = 0;
+
+	for (i = 0; i < num_endpoints && !(ir_ep_found && vfd_ep_found); ++i) {
+
+		struct usb_endpoint_descriptor *ep;
+		int ep_dir;
+		int ep_type;
+		ep = &iface_desc->endpoint [i].desc;
+		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+		if (!ir_ep_found &&
+			ep_dir == USB_DIR_IN &&
+			ep_type == USB_ENDPOINT_XFER_INT) {
+
+			rx_endpoint = ep;
+			ir_ep_found = 1;
+			if (debug)
+				printk(KERN_INFO "%s: found IR endpoint\n",
+				       __func__);
+
+		} else if (!vfd_ep_found &&
+			ep_dir == USB_DIR_OUT &&
+			ep_type == USB_ENDPOINT_XFER_INT) {
+
+			tx_endpoint = ep;
+			vfd_ep_found = 1;
+			if (debug)
+				printk(KERN_INFO "%s: found VFD endpoint\n",
+				       __func__);
+		}
+	}
+
+	/* Input endpoint is mandatory */
+	if (!ir_ep_found) {
+
+		err("%s: no valid input (IR) endpoint found.", __func__);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (!vfd_ep_found)
+		printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n",
+		       __func__);
+
+
+	/* Allocate memory */
+	alloc_status = 0;
+
+	context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL);
+	if (!context) {
+		err("%s: kzalloc failed for context", __func__);
+		alloc_status = 1;
+		goto alloc_status_switch;
+	}
+	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!driver) {
+		err("%s: kzalloc failed for lirc_driver", __func__);
+		alloc_status = 2;
+		goto alloc_status_switch;
+	}
+	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!rbuf) {
+		err("%s: kmalloc failed for lirc_buffer", __func__);
+		alloc_status = 3;
+		goto alloc_status_switch;
+	}
+	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
+		err("%s: lirc_buffer_init failed", __func__);
+		alloc_status = 4;
+		goto alloc_status_switch;
+	}
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!rx_urb) {
+		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		alloc_status = 5;
+		goto alloc_status_switch;
+	}
+	if (vfd_ep_found) {
+		tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!tx_urb) {
+			err("%s: usb_alloc_urb failed for VFD urb",
+			    __func__);
+			alloc_status = 6;
+			goto alloc_status_switch;
+		}
+	}
+
+	mutex_init(&context->ctx_lock);
+
+	strcpy(driver->name, MOD_NAME);
+	driver->minor = -1;
+	driver->code_length = 64;
+	driver->sample_rate = 0;
+	driver->features = LIRC_CAN_REC_LIRCCODE;
+	driver->data = context;
+	driver->rbuf = rbuf;
+	driver->set_use_inc = ir_open;
+	driver->set_use_dec = ir_close;
+	driver->dev   = &interface->dev;
+	driver->owner = THIS_MODULE;
+
+	mutex_lock(&context->ctx_lock);
+
+	lirc_minor = lirc_register_driver(driver);
+	if (lirc_minor < 0) {
+		err("%s: lirc_register_driver failed", __func__);
+		alloc_status = 7;
+		mutex_unlock(&context->ctx_lock);
+	} else
+		printk(KERN_INFO "%s: Registered Sasem driver (minor:%d)\n",
+			__func__, lirc_minor);
+
+alloc_status_switch:
+
+	switch (alloc_status) {
+
+	case 7:
+		if (vfd_ep_found)
+			usb_free_urb(tx_urb);
+	case 6:
+		usb_free_urb(rx_urb);
+	case 5:
+		lirc_buffer_free(rbuf);
+	case 4:
+		kfree(rbuf);
+	case 3:
+		kfree(driver);
+	case 2:
+		kfree(context);
+		context = NULL;
+	case 1:
+		retval = -ENOMEM;
+		goto exit;
+	}
+
+	/* Needed while unregistering! */
+	driver->minor = lirc_minor;
+
+	context->dev = dev;
+	context->dev_present = 1;
+	context->rx_endpoint = rx_endpoint;
+	context->rx_urb = rx_urb;
+	if (vfd_ep_found) {
+		context->tx_endpoint = tx_endpoint;
+		context->tx_urb = tx_urb;
+		context->vfd_contrast = 1000;   /* range 0 - 1000 */
+	}
+	context->driver = driver;
+
+	usb_set_intfdata(interface, context);
+
+	if (vfd_ep_found) {
+
+		if (debug)
+			printk(KERN_INFO "Registering VFD with sysfs\n");
+		if (usb_register_dev(interface, &sasem_class))
+			/* Not a fatal error, so ignore */
+			printk(KERN_INFO "%s: could not get a minor number "
+			       "for VFD\n", __func__);
+	}
+
+	printk(KERN_INFO "%s: Sasem device on usb<%d:%d> initialized\n",
+			__func__, dev->bus->busnum, dev->devnum);
+
+	mutex_unlock(&context->ctx_lock);
+exit:
+	return retval;
+}
+
+/**
+ * Callback function for USB core API: disonnect
+ */
+static void sasem_disconnect(struct usb_interface *interface)
+{
+	struct sasem_context *context;
+
+	/* prevent races with ir_open()/vfd_open() */
+	mutex_lock(&disconnect_lock);
+
+	context = usb_get_intfdata(interface);
+	mutex_lock(&context->ctx_lock);
+
+	printk(KERN_INFO "%s: Sasem device disconnected\n", __func__);
+
+	usb_set_intfdata(interface, NULL);
+	context->dev_present = 0;
+
+	/* Stop reception */
+	usb_kill_urb(context->rx_urb);
+
+	/* Abort ongoing write */
+	if (atomic_read(&context->tx.busy)) {
+
+		usb_kill_urb(context->tx_urb);
+		wait_for_completion(&context->tx.finished);
+	}
+
+	/* De-register from lirc_dev if IR port is not open */
+	if (!context->ir_isopen)
+		deregister_from_lirc(context);
+
+	usb_deregister_dev(interface, &sasem_class);
+
+	mutex_unlock(&context->ctx_lock);
+
+	if (!context->ir_isopen && !context->vfd_isopen)
+		delete_context(context);
+
+	mutex_unlock(&disconnect_lock);
+}
+
+static int __init sasem_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO MOD_DESC ", v" MOD_VERSION "\n");
+	printk(KERN_INFO MOD_AUTHOR "\n");
+
+	rc = usb_register(&sasem_driver);
+	if (rc < 0) {
+		err("%s: usb register failed (%d)", __func__, rc);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void __exit sasem_exit(void)
+{
+	usb_deregister(&sasem_driver);
+	printk(KERN_INFO "module removed. Goodbye!\n");
+}
+
+
+module_init(sasem_init);
+module_exit(sasem_exit);
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
new file mode 100644
index 00000000000..9456f8e3f9e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -0,0 +1,1313 @@
+/*
+ * lirc_serial.c
+ *
+ * lirc_serial - Device driver that records pulse- and pause-lengths
+ *	       (space-lengths) between DDCD event on a serial port.
+ *
+ * Copyright (C) 1996,97 Ralph Metzler <rjkm@thp.uni-koeln.de>
+ * Copyright (C) 1998 Trent Piepho <xyzzy@u.washington.edu>
+ * Copyright (C) 1998 Ben Pfaff <blp@gnu.org>
+ * Copyright (C) 1999 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (C) 2007 Andrei Tanas <andrei@tanas.ca> (suspend/resume support)
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*
+ * Steve's changes to improve transmission fidelity:
+ *   - for systems with the rdtsc instruction and the clock counter, a
+ *     send_pule that times the pulses directly using the counter.
+ *     This means that the LIRC_SERIAL_TRANSMITTER_LATENCY fudge is
+ *     not needed. Measurement shows very stable waveform, even where
+ *     PCI activity slows the access to the UART, which trips up other
+ *     versions.
+ *   - For other system, non-integer-microsecond pulse/space lengths,
+ *     done using fixed point binary. So, much more accurate carrier
+ *     frequency.
+ *   - fine tuned transmitter latency, taking advantage of fractional
+ *     microseconds in previous change
+ *   - Fixed bug in the way transmitter latency was accounted for by
+ *     tuning the pulse lengths down - the send_pulse routine ignored
+ *     this overhead as it timed the overall pulse length - so the
+ *     pulse frequency was right but overall pulse length was too
+ *     long. Fixed by accounting for latency on each pulse/space
+ *     iteration.
+ *
+ * Steve Davies <steve@daviesfam.org>  July 2001
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/platform_device.h>
+
+#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/fcntl.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+#include <asm/hardware.h>
+#endif
+/* From Intel IXP42X Developer's Manual (#252480-005): */
+/* ftp://download.intel.com/design/network/manuals/25248005.pdf */
+#define UART_IE_IXP42X_UUE   0x40 /* IXP42X UART Unit enable */
+#define UART_IE_IXP42X_RTOIE 0x10 /* IXP42X Receiver Data Timeout int.enable */
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#define LIRC_DRIVER_NAME "lirc_serial"
+
+struct lirc_serial {
+	int signal_pin;
+	int signal_pin_change;
+	u8 on;
+	u8 off;
+	long (*send_pulse)(unsigned long length);
+	void (*send_space)(long length);
+	int features;
+	spinlock_t lock;
+};
+
+#define LIRC_HOMEBREW		0
+#define LIRC_IRDEO		1
+#define LIRC_IRDEO_REMOTE	2
+#define LIRC_ANIMAX		3
+#define LIRC_IGOR		4
+#define LIRC_NSLU2		5
+
+/*** module parameters ***/
+static int type;
+static int io;
+static int irq;
+static int iommap;
+static int ioshift;
+static int softcarrier = 1;
+static int share_irq;
+static int debug;
+static int sense = -1;	/* -1 = auto, 0 = active high, 1 = active low */
+static int txsense;	/* 0 = active high, 1 = active low */
+
+#define dprintk(fmt, args...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "	\
+			       fmt, ## args);			\
+	} while (0)
+
+/* forward declarations */
+static long send_pulse_irdeo(unsigned long length);
+static long send_pulse_homebrew(unsigned long length);
+static void send_space_irdeo(long length);
+static void send_space_homebrew(long length);
+
+static struct lirc_serial hardware[] = {
+	[LIRC_HOMEBREW] = {
+		.signal_pin        = UART_MSR_DCD,
+		.signal_pin_change = UART_MSR_DDCD,
+		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+		.off = (UART_MCR_RTS | UART_MCR_OUT2),
+		.send_pulse = send_pulse_homebrew,
+		.send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+		.features    = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+				LIRC_CAN_SET_SEND_CARRIER |
+				LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+		.features    = LIRC_CAN_REC_MODE2
+#endif
+	},
+
+	[LIRC_IRDEO] = {
+		.signal_pin        = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = UART_MCR_OUT2,
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.send_pulse  = send_pulse_irdeo,
+		.send_space  = send_space_irdeo,
+		.features    = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+				LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+	},
+
+	[LIRC_IRDEO_REMOTE] = {
+		.signal_pin        = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.send_pulse  = send_pulse_irdeo,
+		.send_space  = send_space_irdeo,
+		.features    = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+				LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+	},
+
+	[LIRC_ANIMAX] = {
+		.signal_pin        = UART_MSR_DCD,
+		.signal_pin_change = UART_MSR_DDCD,
+		.on  = 0,
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.send_pulse = NULL,
+		.send_space = NULL,
+		.features   = LIRC_CAN_REC_MODE2
+	},
+
+	[LIRC_IGOR] = {
+		.signal_pin        = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+		.off = (UART_MCR_RTS | UART_MCR_OUT2),
+		.send_pulse = send_pulse_homebrew,
+		.send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+		.features    = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+				LIRC_CAN_SET_SEND_CARRIER |
+				LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+		.features    = LIRC_CAN_REC_MODE2
+#endif
+	},
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	/*
+	 * Modified Linksys Network Storage Link USB 2.0 (NSLU2):
+	 * We receive on CTS of the 2nd serial port (R142,LHS), we
+	 * transmit with a IR diode between GPIO[1] (green status LED),
+	 * and ground (Matthias Goebl <matthias.goebl@goebl.net>).
+	 * See also http://www.nslu2-linux.org for this device
+	 */
+	[LIRC_NSLU2] = {
+		.signal_pin        = UART_MSR_CTS,
+		.signal_pin_change = UART_MSR_DCTS,
+		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+		.off = (UART_MCR_RTS | UART_MCR_OUT2),
+		.send_pulse = send_pulse_homebrew,
+		.send_space = send_space_homebrew,
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+		.features    = (LIRC_CAN_SET_SEND_DUTY_CYCLE |
+				LIRC_CAN_SET_SEND_CARRIER |
+				LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2)
+#else
+		.features    = LIRC_CAN_REC_MODE2
+#endif
+	},
+#endif
+
+};
+
+#define RS_ISR_PASS_LIMIT 256
+
+/*
+ * A long pulse code from a remote might take up to 300 bytes.  The
+ * daemon should read the bytes as soon as they are generated, so take
+ * the number of keys you think you can push before the daemon runs
+ * and multiply by 300.  The driver will warn you if you overrun this
+ * buffer.  If you have a slow computer or non-busmastering IDE disks,
+ * maybe you will need to increase this.
+ */
+
+/* This MUST be a power of two!  It has to be larger than 1 as well. */
+
+#define RBUF_LEN 256
+
+static struct timeval lasttv = {0, 0};
+
+static struct lirc_buffer rbuf;
+
+static unsigned int freq = 38000;
+static unsigned int duty_cycle = 50;
+
+/* Initialized in init_timing_params() */
+static unsigned long period;
+static unsigned long pulse_width;
+static unsigned long space_width;
+
+#if defined(__i386__)
+/*
+ * From:
+ * Linux I/O port programming mini-HOWTO
+ * Author: Riku Saikkonen <Riku.Saikkonen@hut.fi>
+ * v, 28 December 1997
+ *
+ * [...]
+ * Actually, a port I/O instruction on most ports in the 0-0x3ff range
+ * takes almost exactly 1 microsecond, so if you're, for example, using
+ * the parallel port directly, just do additional inb()s from that port
+ * to delay.
+ * [...]
+ */
+/* transmitter latency 1.5625us 0x1.90 - this figure arrived at from
+ * comment above plus trimming to match actual measured frequency.
+ * This will be sensitive to cpu speed, though hopefully most of the 1.5us
+ * is spent in the uart access.  Still - for reference test machine was a
+ * 1.13GHz Athlon system - Steve
+ */
+
+/*
+ * changed from 400 to 450 as this works better on slower machines;
+ * faster machines will use the rdtsc code anyway
+ */
+#define LIRC_SERIAL_TRANSMITTER_LATENCY 450
+
+#else
+
+/* does anybody have information on other platforms ? */
+/* 256 = 1<<8 */
+#define LIRC_SERIAL_TRANSMITTER_LATENCY 256
+
+#endif  /* __i386__ */
+/*
+ * FIXME: should we be using hrtimers instead of this
+ * LIRC_SERIAL_TRANSMITTER_LATENCY nonsense?
+ */
+
+/* fetch serial input packet (1 byte) from register offset */
+static u8 sinp(int offset)
+{
+	if (iommap != 0)
+		/* the register is memory-mapped */
+		offset <<= ioshift;
+
+	return inb(io + offset);
+}
+
+/* write serial output packet (1 byte) of value to register offset */
+static void soutp(int offset, u8 value)
+{
+	if (iommap != 0)
+		/* the register is memory-mapped */
+		offset <<= ioshift;
+
+	outb(value, io + offset);
+}
+
+static void on(void)
+{
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	/*
+	 * On NSLU2, we put the transmit diode between the output of the green
+	 * status LED and ground
+	 */
+	if (type == LIRC_NSLU2) {
+		gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW);
+		return;
+	}
+#endif
+	if (txsense)
+		soutp(UART_MCR, hardware[type].off);
+	else
+		soutp(UART_MCR, hardware[type].on);
+}
+
+static void off(void)
+{
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	if (type == LIRC_NSLU2) {
+		gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH);
+		return;
+	}
+#endif
+	if (txsense)
+		soutp(UART_MCR, hardware[type].on);
+	else
+		soutp(UART_MCR, hardware[type].off);
+}
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_US 5000
+#else
+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
+#endif
+
+static void safe_udelay(unsigned long usecs)
+{
+	while (usecs > MAX_UDELAY_US) {
+		udelay(MAX_UDELAY_US);
+		usecs -= MAX_UDELAY_US;
+	}
+	udelay(usecs);
+}
+
+#ifdef USE_RDTSC
+/*
+ * This is an overflow/precision juggle, complicated in that we can't
+ * do long long divide in the kernel
+ */
+
+/*
+ * When we use the rdtsc instruction to measure clocks, we keep the
+ * pulse and space widths as clock cycles.  As this is CPU speed
+ * dependent, the widths must be calculated in init_port and ioctl
+ * time
+ */
+
+/* So send_pulse can quickly convert microseconds to clocks */
+static unsigned long conv_us_to_clocks;
+
+static int init_timing_params(unsigned int new_duty_cycle,
+		unsigned int new_freq)
+{
+	unsigned long long loops_per_sec, work;
+
+	duty_cycle = new_duty_cycle;
+	freq = new_freq;
+
+	loops_per_sec = current_cpu_data.loops_per_jiffy;
+	loops_per_sec *= HZ;
+
+	/* How many clocks in a microsecond?, avoiding long long divide */
+	work = loops_per_sec;
+	work *= 4295;  /* 4295 = 2^32 / 1e6 */
+	conv_us_to_clocks = (work >> 32);
+
+	/*
+	 * Carrier period in clocks, approach good up to 32GHz clock,
+	 * gets carrier frequency within 8Hz
+	 */
+	period = loops_per_sec >> 3;
+	period /= (freq >> 3);
+
+	/* Derive pulse and space from the period */
+	pulse_width = period * duty_cycle / 100;
+	space_width = period - pulse_width;
+	dprintk("in init_timing_params, freq=%d, duty_cycle=%d, "
+		"clk/jiffy=%ld, pulse=%ld, space=%ld, "
+		"conv_us_to_clocks=%ld\n",
+		freq, duty_cycle, current_cpu_data.loops_per_jiffy,
+		pulse_width, space_width, conv_us_to_clocks);
+	return 0;
+}
+#else /* ! USE_RDTSC */
+static int init_timing_params(unsigned int new_duty_cycle,
+		unsigned int new_freq)
+{
+/*
+ * period, pulse/space width are kept with 8 binary places -
+ * IE multiplied by 256.
+ */
+	if (256 * 1000000L / new_freq * new_duty_cycle / 100 <=
+	    LIRC_SERIAL_TRANSMITTER_LATENCY)
+		return -EINVAL;
+	if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <=
+	    LIRC_SERIAL_TRANSMITTER_LATENCY)
+		return -EINVAL;
+	duty_cycle = new_duty_cycle;
+	freq = new_freq;
+	period = 256 * 1000000L / freq;
+	pulse_width = period * duty_cycle / 100;
+	space_width = period - pulse_width;
+	dprintk("in init_timing_params, freq=%d pulse=%ld, "
+		"space=%ld\n", freq, pulse_width, space_width);
+	return 0;
+}
+#endif /* USE_RDTSC */
+
+
+/* return value: space length delta */
+
+static long send_pulse_irdeo(unsigned long length)
+{
+	long rawbits, ret;
+	int i;
+	unsigned char output;
+	unsigned char chunk, shifted;
+
+	/* how many bits have to be sent ? */
+	rawbits = length * 1152 / 10000;
+	if (duty_cycle > 50)
+		chunk = 3;
+	else
+		chunk = 1;
+	for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) {
+		shifted = chunk << (i * 3);
+		shifted >>= 1;
+		output &= (~shifted);
+		i++;
+		if (i == 3) {
+			soutp(UART_TX, output);
+			while (!(sinp(UART_LSR) & UART_LSR_THRE))
+				;
+			output = 0x7f;
+			i = 0;
+		}
+	}
+	if (i != 0) {
+		soutp(UART_TX, output);
+		while (!(sinp(UART_LSR) & UART_LSR_TEMT))
+			;
+	}
+
+	if (i == 0)
+		ret = (-rawbits) * 10000 / 1152;
+	else
+		ret = (3 - i) * 3 * 10000 / 1152 + (-rawbits) * 10000 / 1152;
+
+	return ret;
+}
+
+#ifdef USE_RDTSC
+/* Version that uses Pentium rdtsc instruction to measure clocks */
+
+/*
+ * This version does sub-microsecond timing using rdtsc instruction,
+ * and does away with the fudged LIRC_SERIAL_TRANSMITTER_LATENCY
+ * Implicitly i586 architecture...  - Steve
+ */
+
+static long send_pulse_homebrew_softcarrier(unsigned long length)
+{
+	int flag;
+	unsigned long target, start, now;
+
+	/* Get going quick as we can */
+	rdtscl(start);
+	on();
+	/* Convert length from microseconds to clocks */
+	length *= conv_us_to_clocks;
+	/* And loop till time is up - flipping at right intervals */
+	now = start;
+	target = pulse_width;
+	flag = 1;
+	/*
+	 * FIXME: This looks like a hard busy wait, without even an occasional,
+	 * polite, cpu_relax() call.  There's got to be a better way?
+	 *
+	 * The i2c code has the result of a lot of bit-banging work, I wonder if
+	 * there's something there which could be helpful here.
+	 */
+	while ((now - start) < length) {
+		/* Delay till flip time */
+		do {
+			rdtscl(now);
+		} while ((now - start) < target);
+
+		/* flip */
+		if (flag) {
+			rdtscl(now);
+			off();
+			target += space_width;
+		} else {
+			rdtscl(now); on();
+			target += pulse_width;
+		}
+		flag = !flag;
+	}
+	rdtscl(now);
+	return ((now - start) - length) / conv_us_to_clocks;
+}
+#else /* ! USE_RDTSC */
+/* Version using udelay() */
+
+/*
+ * here we use fixed point arithmetic, with 8
+ * fractional bits.  that gets us within 0.1% or so of the right average
+ * frequency, albeit with some jitter in pulse length - Steve
+ */
+
+/* To match 8 fractional bits used for pulse/space length */
+
+static long send_pulse_homebrew_softcarrier(unsigned long length)
+{
+	int flag;
+	unsigned long actual, target, d;
+	length <<= 8;
+
+	actual = 0; target = 0; flag = 0;
+	while (actual < length) {
+		if (flag) {
+			off();
+			target += space_width;
+		} else {
+			on();
+			target += pulse_width;
+		}
+		d = (target - actual -
+		     LIRC_SERIAL_TRANSMITTER_LATENCY + 128) >> 8;
+		/*
+		 * Note - we've checked in ioctl that the pulse/space
+		 * widths are big enough so that d is > 0
+		 */
+		udelay(d);
+		actual += (d << 8) + LIRC_SERIAL_TRANSMITTER_LATENCY;
+		flag = !flag;
+	}
+	return (actual-length) >> 8;
+}
+#endif /* USE_RDTSC */
+
+static long send_pulse_homebrew(unsigned long length)
+{
+	if (length <= 0)
+		return 0;
+
+	if (softcarrier)
+		return send_pulse_homebrew_softcarrier(length);
+	else {
+		on();
+		safe_udelay(length);
+		return 0;
+	}
+}
+
+static void send_space_irdeo(long length)
+{
+	if (length <= 0)
+		return;
+
+	safe_udelay(length);
+}
+
+static void send_space_homebrew(long length)
+{
+	off();
+	if (length <= 0)
+		return;
+	safe_udelay(length);
+}
+
+static void rbwrite(int l)
+{
+	if (lirc_buffer_full(&rbuf)) {
+		/* no new signals will be accepted */
+		dprintk("Buffer overrun\n");
+		return;
+	}
+	lirc_buffer_write(&rbuf, (void *)&l);
+}
+
+static void frbwrite(int l)
+{
+	/* simple noise filter */
+	static int pulse, space;
+	static unsigned int ptr;
+
+	if (ptr > 0 && (l & PULSE_BIT)) {
+		pulse += l & PULSE_MASK;
+		if (pulse > 250) {
+			rbwrite(space);
+			rbwrite(pulse | PULSE_BIT);
+			ptr = 0;
+			pulse = 0;
+		}
+		return;
+	}
+	if (!(l & PULSE_BIT)) {
+		if (ptr == 0) {
+			if (l > 20000) {
+				space = l;
+				ptr++;
+				return;
+			}
+		} else {
+			if (l > 20000) {
+				space += pulse;
+				if (space > PULSE_MASK)
+					space = PULSE_MASK;
+				space += l;
+				if (space > PULSE_MASK)
+					space = PULSE_MASK;
+				pulse = 0;
+				return;
+			}
+			rbwrite(space);
+			rbwrite(pulse | PULSE_BIT);
+			ptr = 0;
+			pulse = 0;
+		}
+	}
+	rbwrite(l);
+}
+
+static irqreturn_t irq_handler(int i, void *blah)
+{
+	struct timeval tv;
+	int counter, dcd;
+	u8 status;
+	long deltv;
+	int data;
+	static int last_dcd = -1;
+
+	if ((sinp(UART_IIR) & UART_IIR_NO_INT)) {
+		/* not our interrupt */
+		return IRQ_NONE;
+	}
+
+	counter = 0;
+	do {
+		counter++;
+		status = sinp(UART_MSR);
+		if (counter > RS_ISR_PASS_LIMIT) {
+			printk(KERN_WARNING LIRC_DRIVER_NAME ": AIEEEE: "
+			       "We're caught!\n");
+			break;
+		}
+		if ((status & hardware[type].signal_pin_change)
+		    && sense != -1) {
+			/* get current time */
+			do_gettimeofday(&tv);
+
+			/* New mode, written by Trent Piepho
+			   <xyzzy@u.washington.edu>. */
+
+			/*
+			 * The old format was not very portable.
+			 * We now use an int to pass pulses
+			 * and spaces to user space.
+			 *
+			 * If PULSE_BIT is set a pulse has been
+			 * received, otherwise a space has been
+			 * received.  The driver needs to know if your
+			 * receiver is active high or active low, or
+			 * the space/pulse sense could be
+			 * inverted. The bits denoted by PULSE_MASK are
+			 * the length in microseconds. Lengths greater
+			 * than or equal to 16 seconds are clamped to
+			 * PULSE_MASK.  All other bits are unused.
+			 * This is a much simpler interface for user
+			 * programs, as well as eliminating "out of
+			 * phase" errors with space/pulse
+			 * autodetection.
+			 */
+
+			/* calc time since last interrupt in microseconds */
+			dcd = (status & hardware[type].signal_pin) ? 1 : 0;
+
+			if (dcd == last_dcd) {
+				printk(KERN_WARNING LIRC_DRIVER_NAME
+				": ignoring spike: %d %d %lx %lx %lx %lx\n",
+				dcd, sense,
+				tv.tv_sec, lasttv.tv_sec,
+				tv.tv_usec, lasttv.tv_usec);
+				continue;
+			}
+
+			deltv = tv.tv_sec-lasttv.tv_sec;
+			if (tv.tv_sec < lasttv.tv_sec ||
+			    (tv.tv_sec == lasttv.tv_sec &&
+			     tv.tv_usec < lasttv.tv_usec)) {
+				printk(KERN_WARNING LIRC_DRIVER_NAME
+				       ": AIEEEE: your clock just jumped "
+				       "backwards\n");
+				printk(KERN_WARNING LIRC_DRIVER_NAME
+				       ": %d %d %lx %lx %lx %lx\n",
+				       dcd, sense,
+				       tv.tv_sec, lasttv.tv_sec,
+				       tv.tv_usec, lasttv.tv_usec);
+				data = PULSE_MASK;
+			} else if (deltv > 15) {
+				data = PULSE_MASK; /* really long time */
+				if (!(dcd^sense)) {
+					/* sanity check */
+					printk(KERN_WARNING LIRC_DRIVER_NAME
+					       ": AIEEEE: "
+					       "%d %d %lx %lx %lx %lx\n",
+					       dcd, sense,
+					       tv.tv_sec, lasttv.tv_sec,
+					       tv.tv_usec, lasttv.tv_usec);
+					/*
+					 * detecting pulse while this
+					 * MUST be a space!
+					 */
+					sense = sense ? 0 : 1;
+				}
+			} else
+				data = (int) (deltv*1000000 +
+					       tv.tv_usec -
+					       lasttv.tv_usec);
+			frbwrite(dcd^sense ? data : (data|PULSE_BIT));
+			lasttv = tv;
+			last_dcd = dcd;
+			wake_up_interruptible(&rbuf.wait_poll);
+		}
+	} while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
+	return IRQ_HANDLED;
+}
+
+
+static int hardware_init_port(void)
+{
+	u8 scratch, scratch2, scratch3;
+
+	/*
+	 * This is a simple port existence test, borrowed from the autoconfig
+	 * function in drivers/serial/8250.c
+	 */
+	scratch = sinp(UART_IER);
+	soutp(UART_IER, 0);
+#ifdef __i386__
+	outb(0xff, 0x080);
+#endif
+	scratch2 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, 0x0f);
+#ifdef __i386__
+	outb(0x00, 0x080);
+#endif
+	scratch3 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, scratch);
+	if (scratch2 != 0 || scratch3 != 0x0f) {
+		/* we fail, there's nothing here */
+		printk(KERN_ERR LIRC_DRIVER_NAME ": port existence test "
+		       "failed, cannot continue\n");
+		return -EINVAL;
+	}
+
+
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* First of all, disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+	/* Clear registers. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	if (type == LIRC_NSLU2) {
+		/* Setup NSLU2 UART */
+
+		/* Enable UART */
+		soutp(UART_IER, sinp(UART_IER) | UART_IE_IXP42X_UUE);
+		/* Disable Receiver data Time out interrupt */
+		soutp(UART_IER, sinp(UART_IER) & ~UART_IE_IXP42X_RTOIE);
+		/* set out2 = interrupt unmask; off() doesn't set MCR
+		   on NSLU2 */
+		soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+	}
+#endif
+
+	/* Set line for power source */
+	off();
+
+	/* Clear registers again to be sure. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+	switch (type) {
+	case LIRC_IRDEO:
+	case LIRC_IRDEO_REMOTE:
+		/* setup port to 7N1 @ 115200 Baud */
+		/* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */
+
+		/* Set DLAB 1. */
+		soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+		/* Set divisor to 1 => 115200 Baud */
+		soutp(UART_DLM, 0);
+		soutp(UART_DLL, 1);
+		/* Set DLAB 0 +  7N1 */
+		soutp(UART_LCR, UART_LCR_WLEN7);
+		/* THR interrupt already disabled at this point */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int init_port(void)
+{
+	int i, nlow, nhigh;
+
+	/* Reserve io region. */
+	/*
+	 * Future MMAP-Developers: Attention!
+	 * For memory mapped I/O you *might* need to use ioremap() first,
+	 * for the NSLU2 it's done in boot code.
+	 */
+	if (((iommap != 0)
+	     && (request_mem_region(iommap, 8 << ioshift,
+				    LIRC_DRIVER_NAME) == NULL))
+	   || ((iommap == 0)
+	       && (request_region(io, 8, LIRC_DRIVER_NAME) == NULL))) {
+		printk(KERN_ERR  LIRC_DRIVER_NAME
+		       ": port %04x already in use\n", io);
+		printk(KERN_WARNING LIRC_DRIVER_NAME
+		       ": use 'setserial /dev/ttySX uart none'\n");
+		printk(KERN_WARNING LIRC_DRIVER_NAME
+		       ": or compile the serial port driver as module and\n");
+		printk(KERN_WARNING LIRC_DRIVER_NAME
+		       ": make sure this module is loaded first\n");
+		return -EBUSY;
+	}
+
+	if (hardware_init_port() < 0)
+		return -EINVAL;
+
+	/* Initialize pulse/space widths */
+	init_timing_params(duty_cycle, freq);
+
+	/* If pin is high, then this must be an active low receiver. */
+	if (sense == -1) {
+		/* wait 1/2 sec for the power supply */
+		msleep(500);
+
+		/*
+		 * probe 9 times every 0.04s, collect "votes" for
+		 * active high/low
+		 */
+		nlow = 0;
+		nhigh = 0;
+		for (i = 0; i < 9; i++) {
+			if (sinp(UART_MSR) & hardware[type].signal_pin)
+				nlow++;
+			else
+				nhigh++;
+			msleep(40);
+		}
+		sense = (nlow >= nhigh ? 1 : 0);
+		printk(KERN_INFO LIRC_DRIVER_NAME  ": auto-detected active "
+		       "%s receiver\n", sense ? "low" : "high");
+	} else
+		printk(KERN_INFO LIRC_DRIVER_NAME  ": Manually using active "
+		       "%s receiver\n", sense ? "low" : "high");
+
+	return 0;
+}
+
+static int set_use_inc(void *data)
+{
+	int result;
+	unsigned long flags;
+
+	/* initialize timestamp */
+	do_gettimeofday(&lasttv);
+
+	result = request_irq(irq, irq_handler,
+			     IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+			     LIRC_DRIVER_NAME, (void *)&hardware);
+
+	switch (result) {
+	case -EBUSY:
+		printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+		return -EBUSY;
+	case -EINVAL:
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": Bad irq number or handler\n");
+		return -EINVAL;
+	default:
+		dprintk("Interrupt %d, port %04x obtained\n", irq, io);
+		break;
+	};
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{	unsigned long flags;
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* First of all, disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+	free_irq(irq, (void *)&hardware);
+
+	dprintk("freed IRQ %d\n", irq);
+}
+
+static ssize_t lirc_write(struct file *file, const char *buf,
+			 size_t n, loff_t *ppos)
+{
+	int i, count;
+	unsigned long flags;
+	long delta = 0;
+	int *wbuf;
+
+	if (!(hardware[type].features & LIRC_CAN_SEND_PULSE))
+		return -EBADF;
+
+	count = n / sizeof(int);
+	if (n % sizeof(int) || count % 2 == 0)
+		return -EINVAL;
+	wbuf = memdup_user(buf, n);
+	if (PTR_ERR(wbuf))
+		return PTR_ERR(wbuf);
+	spin_lock_irqsave(&hardware[type].lock, flags);
+	if (type == LIRC_IRDEO) {
+		/* DTR, RTS down */
+		on();
+	}
+	for (i = 0; i < count; i++) {
+		if (i%2)
+			hardware[type].send_space(wbuf[i] - delta);
+		else
+			delta = hardware[type].send_pulse(wbuf[i]);
+	}
+	off();
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+	return n;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	int result;
+	unsigned long value;
+	unsigned int ivalue;
+
+	switch (cmd) {
+	case LIRC_GET_SEND_MODE:
+		if (!(hardware[type].features&LIRC_CAN_SEND_MASK))
+			return -ENOIOCTLCMD;
+
+		result = put_user(LIRC_SEND2MODE
+				  (hardware[type].features&LIRC_CAN_SEND_MASK),
+				  (unsigned long *) arg);
+		if (result)
+			return result;
+		break;
+
+	case LIRC_SET_SEND_MODE:
+		if (!(hardware[type].features&LIRC_CAN_SEND_MASK))
+			return -ENOIOCTLCMD;
+
+		result = get_user(value, (unsigned long *) arg);
+		if (result)
+			return result;
+		/* only LIRC_MODE_PULSE supported */
+		if (value != LIRC_MODE_PULSE)
+			return -ENOSYS;
+		break;
+
+	case LIRC_GET_LENGTH:
+		return -ENOSYS;
+		break;
+
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		dprintk("SET_SEND_DUTY_CYCLE\n");
+		if (!(hardware[type].features&LIRC_CAN_SET_SEND_DUTY_CYCLE))
+			return -ENOIOCTLCMD;
+
+		result = get_user(ivalue, (unsigned int *) arg);
+		if (result)
+			return result;
+		if (ivalue <= 0 || ivalue > 100)
+			return -EINVAL;
+		return init_timing_params(ivalue, freq);
+		break;
+
+	case LIRC_SET_SEND_CARRIER:
+		dprintk("SET_SEND_CARRIER\n");
+		if (!(hardware[type].features&LIRC_CAN_SET_SEND_CARRIER))
+			return -ENOIOCTLCMD;
+
+		result = get_user(ivalue, (unsigned int *) arg);
+		if (result)
+			return result;
+		if (ivalue > 500000 || ivalue < 20000)
+			return -EINVAL;
+		return init_timing_params(duty_cycle, ivalue);
+		break;
+
+	default:
+		return lirc_dev_fop_ioctl(filep, cmd, arg);
+	}
+	return 0;
+}
+
+static const struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.write		= lirc_write,
+	.unlocked_ioctl	= lirc_ioctl,
+	.read		= lirc_dev_fop_read,
+	.poll		= lirc_dev_fop_poll,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+};
+
+static struct lirc_driver driver = {
+	.name		= LIRC_DRIVER_NAME,
+	.minor		= -1,
+	.code_length	= 1,
+	.sample_rate	= 0,
+	.data		= NULL,
+	.add_to_buf	= NULL,
+	.rbuf		= &rbuf,
+	.set_use_inc	= set_use_inc,
+	.set_use_dec	= set_use_dec,
+	.fops		= &lirc_fops,
+	.dev		= NULL,
+	.owner		= THIS_MODULE,
+};
+
+static struct platform_device *lirc_serial_dev;
+
+static int __devinit lirc_serial_probe(struct platform_device *dev)
+{
+	return 0;
+}
+
+static int __devexit lirc_serial_remove(struct platform_device *dev)
+{
+	return 0;
+}
+
+static int lirc_serial_suspend(struct platform_device *dev,
+			       pm_message_t state)
+{
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* Disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+	/* Clear registers. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+	return 0;
+}
+
+/* twisty maze... need a forward-declaration here... */
+static void lirc_serial_exit(void);
+
+static int lirc_serial_resume(struct platform_device *dev)
+{
+	unsigned long flags;
+
+	if (hardware_init_port() < 0) {
+		lirc_serial_exit();
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+	/* Enable Interrupt */
+	do_gettimeofday(&lasttv);
+	soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI);
+	off();
+
+	lirc_buffer_clear(&rbuf);
+
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+	return 0;
+}
+
+static struct platform_driver lirc_serial_driver = {
+	.probe		= lirc_serial_probe,
+	.remove		= __devexit_p(lirc_serial_remove),
+	.suspend	= lirc_serial_suspend,
+	.resume		= lirc_serial_resume,
+	.driver		= {
+		.name	= "lirc_serial",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init lirc_serial_init(void)
+{
+	int result;
+
+	/* Init read buffer. */
+	result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN);
+	if (result < 0)
+		return -ENOMEM;
+
+	result = platform_driver_register(&lirc_serial_driver);
+	if (result) {
+		printk("lirc register returned %d\n", result);
+		goto exit_buffer_free;
+	}
+
+	lirc_serial_dev = platform_device_alloc("lirc_serial", 0);
+	if (!lirc_serial_dev) {
+		result = -ENOMEM;
+		goto exit_driver_unregister;
+	}
+
+	result = platform_device_add(lirc_serial_dev);
+	if (result)
+		goto exit_device_put;
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(lirc_serial_dev);
+exit_driver_unregister:
+	platform_driver_unregister(&lirc_serial_driver);
+exit_buffer_free:
+	lirc_buffer_free(&rbuf);
+	return result;
+}
+
+static void lirc_serial_exit(void)
+{
+	platform_device_unregister(lirc_serial_dev);
+	platform_driver_unregister(&lirc_serial_driver);
+	lirc_buffer_free(&rbuf);
+}
+
+static int __init lirc_serial_init_module(void)
+{
+	int result;
+
+	result = lirc_serial_init();
+	if (result)
+		return result;
+
+	switch (type) {
+	case LIRC_HOMEBREW:
+	case LIRC_IRDEO:
+	case LIRC_IRDEO_REMOTE:
+	case LIRC_ANIMAX:
+	case LIRC_IGOR:
+		/* if nothing specified, use ttyS0/com1 and irq 4 */
+		io = io ? io : 0x3f8;
+		irq = irq ? irq : 4;
+		break;
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	case LIRC_NSLU2:
+		io = io ? io : IRQ_IXP4XX_UART2;
+		irq = irq ? irq : (IXP4XX_UART2_BASE_VIRT + REG_OFFSET);
+		iommap = iommap ? iommap : IXP4XX_UART2_BASE_PHYS;
+		ioshift = ioshift ? ioshift : 2;
+		break;
+#endif
+	default:
+		result = -EINVAL;
+		goto exit_serial_exit;
+	}
+	if (!softcarrier) {
+		switch (type) {
+		case LIRC_HOMEBREW:
+		case LIRC_IGOR:
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+		case LIRC_NSLU2:
+#endif
+			hardware[type].features &=
+				~(LIRC_CAN_SET_SEND_DUTY_CYCLE|
+				  LIRC_CAN_SET_SEND_CARRIER);
+			break;
+		}
+	}
+
+	result = init_port();
+	if (result < 0)
+		goto exit_serial_exit;
+	driver.features = hardware[type].features;
+	driver.dev = &lirc_serial_dev->dev;
+	driver.minor = lirc_register_driver(&driver);
+	if (driver.minor < 0) {
+		printk(KERN_ERR  LIRC_DRIVER_NAME
+		       ": register_chrdev failed!\n");
+		result = -EIO;
+		goto exit_release;
+	}
+	return 0;
+exit_release:
+	release_region(io, 8);
+exit_serial_exit:
+	lirc_serial_exit();
+	return result;
+}
+
+static void __exit lirc_serial_exit_module(void)
+{
+	lirc_serial_exit();
+	if (iommap != 0)
+		release_mem_region(iommap, 8 << ioshift);
+	else
+		release_region(io, 8);
+	lirc_unregister_driver(driver.minor);
+	dprintk("cleaned up module\n");
+}
+
+
+module_init(lirc_serial_init_module);
+module_exit(lirc_serial_exit_module);
+
+MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
+MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, "
+	      "Christoph Bartelmus, Andrei Tanas");
+MODULE_LICENSE("GPL");
+
+module_param(type, int, S_IRUGO);
+MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo,"
+		 " 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug,"
+		 " 5 = NSLU2 RX:CTS2/TX:GreenLED)");
+
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+/* some architectures (e.g. intel xscale) have memory mapped registers */
+module_param(iommap, bool, S_IRUGO);
+MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O"
+		" (0 = no memory mapped io)");
+
+/*
+ * some architectures (e.g. intel xscale) align the 8bit serial registers
+ * on 32bit word boundaries.
+ * See linux-kernel/serial/8250.c serial_in()/out()
+ */
+module_param(ioshift, int, S_IRUGO);
+MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(share_irq, bool, S_IRUGO);
+MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
+
+module_param(sense, bool, S_IRUGO);
+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
+		 " (0 = active high, 1 = active low )");
+
+#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
+module_param(txsense, bool, S_IRUGO);
+MODULE_PARM_DESC(txsense, "Sense of transmitter circuit"
+		 " (0 = active high, 1 = active low )");
+#endif
+
+module_param(softcarrier, bool, S_IRUGO);
+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
new file mode 100644
index 00000000000..eb08fa7138b
--- /dev/null
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -0,0 +1,1282 @@
+/*
+ * LIRC SIR driver, (C) 2000 Milan Pikula <www@fornax.sk>
+ *
+ * lirc_sir - Device driver for use with SIR (serial infra red)
+ * mode of IrDA on many notebooks.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * 2000/09/16 Frank Przybylski <mail@frankprzybylski.de> :
+ *  added timeout and relaxed pulse detection, removed gap bug
+ *
+ * 2000/12/15 Christoph Bartelmus <lirc@bartelmus.de> :
+ *   added support for Tekram Irmate 210 (sending does not work yet,
+ *   kind of disappointing that nobody was able to implement that
+ *   before),
+ *   major clean-up
+ *
+ * 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> :
+ *   added support for StrongARM SA1100 embedded microprocessor
+ *   parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/system.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/fcntl.h>
+#ifdef LIRC_ON_SA1100
+#include <asm/hardware.h>
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch/tc35143.h>
+#include <asm/ucb1200.h>
+#endif
+#endif
+
+#include <linux/timer.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* SECTION: Definitions */
+
+/*** Tekram dongle ***/
+#ifdef LIRC_SIR_TEKRAM
+/* stolen from kernel source */
+/* definitions for Tekram dongle */
+#define TEKRAM_115200 0x00
+#define TEKRAM_57600  0x01
+#define TEKRAM_38400  0x02
+#define TEKRAM_19200  0x03
+#define TEKRAM_9600   0x04
+#define TEKRAM_2400   0x08
+
+#define TEKRAM_PW 0x10 /* Pulse select bit */
+
+/* 10bit * 1s/115200bit in milliseconds = 87ms*/
+#define TIME_CONST (10000000ul/115200ul)
+
+#endif
+
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+static void init_act200(void);
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+static void init_act220(void);
+#endif
+
+/*** SA1100 ***/
+#ifdef LIRC_ON_SA1100
+struct sa1100_ser2_registers {
+	/* HSSP control register */
+	unsigned char hscr0;
+	/* UART registers */
+	unsigned char utcr0;
+	unsigned char utcr1;
+	unsigned char utcr2;
+	unsigned char utcr3;
+	unsigned char utcr4;
+	unsigned char utdr;
+	unsigned char utsr0;
+	unsigned char utsr1;
+} sr;
+
+static int irq = IRQ_Ser2ICP;
+
+#define LIRC_ON_SA1100_TRANSMITTER_LATENCY 0
+
+/* pulse/space ratio of 50/50 */
+static unsigned long pulse_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
+/* 1000000/freq-pulse_width */
+static unsigned long space_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
+static unsigned int freq = 38000;      /* modulation frequency */
+static unsigned int duty_cycle = 50;   /* duty cycle of 50% */
+
+#endif
+
+#define RBUF_LEN 1024
+#define WBUF_LEN 1024
+
+#define LIRC_DRIVER_NAME "lirc_sir"
+
+#define PULSE '['
+
+#ifndef LIRC_SIR_TEKRAM
+/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/
+#define TIME_CONST (9000000ul/115200ul)
+#endif
+
+
+/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */
+#define SIR_TIMEOUT	(HZ*5/100)
+
+#ifndef LIRC_ON_SA1100
+#ifndef LIRC_IRQ
+#define LIRC_IRQ 4
+#endif
+#ifndef LIRC_PORT
+/* for external dongles, default to com1 */
+#if defined(LIRC_SIR_ACTISYS_ACT200L) || \
+    defined(LIRC_SIR_ACTISYS_ACT220L) || \
+    defined(LIRC_SIR_TEKRAM)
+#define LIRC_PORT 0x3f8
+#else
+/* onboard sir ports are typically com3 */
+#define LIRC_PORT 0x3e8
+#endif
+#endif
+
+static int io = LIRC_PORT;
+static int irq = LIRC_IRQ;
+static int threshold = 3;
+#endif
+
+static DEFINE_SPINLOCK(timer_lock);
+static struct timer_list timerlist;
+/* time of last signal change detected */
+static struct timeval last_tv = {0, 0};
+/* time of last UART data ready interrupt */
+static struct timeval last_intr_tv = {0, 0};
+static int last_value;
+
+static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
+
+static DEFINE_SPINLOCK(hardware_lock);
+
+static int rx_buf[RBUF_LEN];
+static unsigned int rx_tail, rx_head;
+
+static int debug;
+#define dprintk(fmt, args...)						\
+	do {								\
+		if (debug)						\
+			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "		\
+				fmt, ## args);				\
+	} while (0)
+
+/* SECTION: Prototypes */
+
+/* Communication with user-space */
+static unsigned int lirc_poll(struct file *file, poll_table *wait);
+static ssize_t lirc_read(struct file *file, char *buf, size_t count,
+		loff_t *ppos);
+static ssize_t lirc_write(struct file *file, const char *buf, size_t n,
+		loff_t *pos);
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+static void add_read_queue(int flag, unsigned long val);
+static int init_chrdev(void);
+static void drop_chrdev(void);
+/* Hardware */
+static irqreturn_t sir_interrupt(int irq, void *dev_id);
+static void send_space(unsigned long len);
+static void send_pulse(unsigned long len);
+static int init_hardware(void);
+static void drop_hardware(void);
+/* Initialisation */
+static int init_port(void);
+static void drop_port(void);
+
+#ifdef LIRC_ON_SA1100
+static void on(void)
+{
+	PPSR |= PPC_TXD2;
+}
+
+static void off(void)
+{
+	PPSR &= ~PPC_TXD2;
+}
+#else
+static inline unsigned int sinp(int offset)
+{
+	return inb(io + offset);
+}
+
+static inline void soutp(int offset, int value)
+{
+	outb(value, io + offset);
+}
+#endif
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_US 5000
+#else
+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
+#endif
+
+static void safe_udelay(unsigned long usecs)
+{
+	while (usecs > MAX_UDELAY_US) {
+		udelay(MAX_UDELAY_US);
+		usecs -= MAX_UDELAY_US;
+	}
+	udelay(usecs);
+}
+
+/* SECTION: Communication with user-space */
+
+static unsigned int lirc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &lirc_read_queue, wait);
+	if (rx_head != rx_tail)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static ssize_t lirc_read(struct file *file, char *buf, size_t count,
+		loff_t *ppos)
+{
+	int n = 0;
+	int retval = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	if (count % sizeof(int))
+		return -EINVAL;
+
+	add_wait_queue(&lirc_read_queue, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (n < count) {
+		if (rx_head != rx_tail) {
+			if (copy_to_user((void *) buf + n,
+					(void *) (rx_buf + rx_head),
+					sizeof(int))) {
+				retval = -EFAULT;
+				break;
+			}
+			rx_head = (rx_head + 1) & (RBUF_LEN - 1);
+			n += sizeof(int);
+		} else {
+			if (file->f_flags & O_NONBLOCK) {
+				retval = -EAGAIN;
+				break;
+			}
+			if (signal_pending(current)) {
+				retval = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+		}
+	}
+	remove_wait_queue(&lirc_read_queue, &wait);
+	set_current_state(TASK_RUNNING);
+	return n ? n : retval;
+}
+static ssize_t lirc_write(struct file *file, const char *buf, size_t n,
+				loff_t *pos)
+{
+	unsigned long flags;
+	int i, count;
+	int *tx_buf;
+
+	count = n / sizeof(int);
+	if (n % sizeof(int) || count % 2 == 0)
+		return -EINVAL;
+	tx_buf = memdup_user(buf, n);
+	if (IS_ERR(tx_buf))
+		return PTR_ERR(tx_buf);
+	i = 0;
+#ifdef LIRC_ON_SA1100
+	/* disable receiver */
+	Ser2UTCR3 = 0;
+#endif
+	local_irq_save(flags);
+	while (1) {
+		if (i >= count)
+			break;
+		if (tx_buf[i])
+			send_pulse(tx_buf[i]);
+		i++;
+		if (i >= count)
+			break;
+		if (tx_buf[i])
+			send_space(tx_buf[i]);
+		i++;
+	}
+	local_irq_restore(flags);
+#ifdef LIRC_ON_SA1100
+	off();
+	udelay(1000); /* wait 1ms for IR diode to recover */
+	Ser2UTCR3 = 0;
+	/* clear status register to prevent unwanted interrupts */
+	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+	/* enable receiver */
+	Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
+#endif
+	return count;
+}
+
+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	int retval = 0;
+	unsigned long value = 0;
+#ifdef LIRC_ON_SA1100
+	unsigned int ivalue;
+
+	if (cmd == LIRC_GET_FEATURES)
+		value = LIRC_CAN_SEND_PULSE |
+			LIRC_CAN_SET_SEND_DUTY_CYCLE |
+			LIRC_CAN_SET_SEND_CARRIER |
+			LIRC_CAN_REC_MODE2;
+	else if (cmd == LIRC_GET_SEND_MODE)
+		value = LIRC_MODE_PULSE;
+	else if (cmd == LIRC_GET_REC_MODE)
+		value = LIRC_MODE_MODE2;
+#else
+	if (cmd == LIRC_GET_FEATURES)
+		value = LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2;
+	else if (cmd == LIRC_GET_SEND_MODE)
+		value = LIRC_MODE_PULSE;
+	else if (cmd == LIRC_GET_REC_MODE)
+		value = LIRC_MODE_MODE2;
+#endif
+
+	switch (cmd) {
+	case LIRC_GET_FEATURES:
+	case LIRC_GET_SEND_MODE:
+	case LIRC_GET_REC_MODE:
+		retval = put_user(value, (unsigned long *) arg);
+		break;
+
+	case LIRC_SET_SEND_MODE:
+	case LIRC_SET_REC_MODE:
+		retval = get_user(value, (unsigned long *) arg);
+		break;
+#ifdef LIRC_ON_SA1100
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		retval = get_user(ivalue, (unsigned int *) arg);
+		if (retval)
+			return retval;
+		if (ivalue <= 0 || ivalue > 100)
+			return -EINVAL;
+		/* (ivalue/100)*(1000000/freq) */
+		duty_cycle = ivalue;
+		pulse_width = (unsigned long) duty_cycle*10000/freq;
+		space_width = (unsigned long) 1000000L/freq-pulse_width;
+		if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+			pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+		if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+			space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+		break;
+	case LIRC_SET_SEND_CARRIER:
+		retval = get_user(ivalue, (unsigned int *) arg);
+		if (retval)
+			return retval;
+		if (ivalue > 500000 || ivalue < 20000)
+			return -EINVAL;
+		freq = ivalue;
+		pulse_width = (unsigned long) duty_cycle*10000/freq;
+		space_width = (unsigned long) 1000000L/freq-pulse_width;
+		if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+			pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+		if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
+			space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
+		break;
+#endif
+	default:
+		retval = -ENOIOCTLCMD;
+
+	}
+
+	if (retval)
+		return retval;
+	if (cmd == LIRC_SET_REC_MODE) {
+		if (value != LIRC_MODE_MODE2)
+			retval = -ENOSYS;
+	} else if (cmd == LIRC_SET_SEND_MODE) {
+		if (value != LIRC_MODE_PULSE)
+			retval = -ENOSYS;
+	}
+
+	return retval;
+}
+
+static void add_read_queue(int flag, unsigned long val)
+{
+	unsigned int new_rx_tail;
+	int newval;
+
+	dprintk("add flag %d with val %lu\n", flag, val);
+
+	newval = val & PULSE_MASK;
+
+	/*
+	 * statistically, pulses are ~TIME_CONST/2 too long. we could
+	 * maybe make this more exact, but this is good enough
+	 */
+	if (flag) {
+		/* pulse */
+		if (newval > TIME_CONST/2)
+			newval -= TIME_CONST/2;
+		else /* should not ever happen */
+			newval = 1;
+		newval |= PULSE_BIT;
+	} else {
+		newval += TIME_CONST/2;
+	}
+	new_rx_tail = (rx_tail + 1) & (RBUF_LEN - 1);
+	if (new_rx_tail == rx_head) {
+		dprintk("Buffer overrun.\n");
+		return;
+	}
+	rx_buf[rx_tail] = newval;
+	rx_tail = new_rx_tail;
+	wake_up_interruptible(&lirc_read_queue);
+}
+
+static const struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.read		= lirc_read,
+	.write		= lirc_write,
+	.poll		= lirc_poll,
+	.unlocked_ioctl	= lirc_ioctl,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+};
+
+static int set_use_inc(void *data)
+{
+       return 0;
+}
+
+static void set_use_dec(void *data)
+{
+}
+
+static struct lirc_driver driver = {
+       .name		= LIRC_DRIVER_NAME,
+       .minor		= -1,
+       .code_length	= 1,
+       .sample_rate	= 0,
+       .data		= NULL,
+       .add_to_buf	= NULL,
+       .set_use_inc	= set_use_inc,
+       .set_use_dec	= set_use_dec,
+       .fops		= &lirc_fops,
+       .dev		= NULL,
+       .owner		= THIS_MODULE,
+};
+
+
+static int init_chrdev(void)
+{
+	driver.minor = lirc_register_driver(&driver);
+	if (driver.minor < 0) {
+		printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+static void drop_chrdev(void)
+{
+	lirc_unregister_driver(driver.minor);
+}
+
+/* SECTION: Hardware */
+static long delta(struct timeval *tv1, struct timeval *tv2)
+{
+	unsigned long deltv;
+
+	deltv = tv2->tv_sec - tv1->tv_sec;
+	if (deltv > 15)
+		deltv = 0xFFFFFF;
+	else
+		deltv = deltv*1000000 +
+			tv2->tv_usec -
+			tv1->tv_usec;
+	return deltv;
+}
+
+static void sir_timeout(unsigned long data)
+{
+	/*
+	 * if last received signal was a pulse, but receiving stopped
+	 * within the 9 bit frame, we need to finish this pulse and
+	 * simulate a signal change to from pulse to space. Otherwise
+	 * upper layers will receive two sequences next time.
+	 */
+
+	unsigned long flags;
+	unsigned long pulse_end;
+
+	/* avoid interference with interrupt */
+	spin_lock_irqsave(&timer_lock, flags);
+	if (last_value) {
+#ifndef LIRC_ON_SA1100
+		/* clear unread bits in UART and restart */
+		outb(UART_FCR_CLEAR_RCVR, io + UART_FCR);
+#endif
+		/* determine 'virtual' pulse end: */
+		pulse_end = delta(&last_tv, &last_intr_tv);
+		dprintk("timeout add %d for %lu usec\n", last_value, pulse_end);
+		add_read_queue(last_value, pulse_end);
+		last_value = 0;
+		last_tv = last_intr_tv;
+	}
+	spin_unlock_irqrestore(&timer_lock, flags);
+}
+
+static irqreturn_t sir_interrupt(int irq, void *dev_id)
+{
+	unsigned char data;
+	struct timeval curr_tv;
+	static unsigned long deltv;
+#ifdef LIRC_ON_SA1100
+	int status;
+	static int n;
+
+	status = Ser2UTSR0;
+	/*
+	 * Deal with any receive errors first.  The bytes in error may be
+	 * the only bytes in the receive FIFO, so we do this first.
+	 */
+	while (status & UTSR0_EIF) {
+		int bstat;
+
+		if (debug) {
+			dprintk("EIF\n");
+			bstat = Ser2UTSR1;
+
+			if (bstat & UTSR1_FRE)
+				dprintk("frame error\n");
+			if (bstat & UTSR1_ROR)
+				dprintk("receive fifo overrun\n");
+			if (bstat & UTSR1_PRE)
+				dprintk("parity error\n");
+		}
+
+		bstat = Ser2UTDR;
+		n++;
+		status = Ser2UTSR0;
+	}
+
+	if (status & (UTSR0_RFS | UTSR0_RID)) {
+		do_gettimeofday(&curr_tv);
+		deltv = delta(&last_tv, &curr_tv);
+		do {
+			data = Ser2UTDR;
+			dprintk("%d data: %u\n", n, (unsigned int) data);
+			n++;
+		} while (status & UTSR0_RID && /* do not empty fifo in order to
+						* get UTSR0_RID in any case */
+		      Ser2UTSR1 & UTSR1_RNE); /* data ready */
+
+		if (status&UTSR0_RID) {
+			add_read_queue(0 , deltv - n * TIME_CONST); /*space*/
+			add_read_queue(1, n * TIME_CONST); /*pulse*/
+			n = 0;
+			last_tv = curr_tv;
+		}
+	}
+
+	if (status & UTSR0_TFS)
+		printk(KERN_ERR "transmit fifo not full, shouldn't happen\n");
+
+	/* We must clear certain bits. */
+	status &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+	if (status)
+		Ser2UTSR0 = status;
+#else
+	unsigned long deltintrtv;
+	unsigned long flags;
+	int iir, lsr;
+
+	while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) {
+		switch (iir&UART_IIR_ID) { /* FIXME toto treba preriedit */
+		case UART_IIR_MSI:
+			(void) inb(io + UART_MSR);
+			break;
+		case UART_IIR_RLSI:
+			(void) inb(io + UART_LSR);
+			break;
+		case UART_IIR_THRI:
+#if 0
+			if (lsr & UART_LSR_THRE) /* FIFO is empty */
+				outb(data, io + UART_TX)
+#endif
+			break;
+		case UART_IIR_RDI:
+			/* avoid interference with timer */
+			spin_lock_irqsave(&timer_lock, flags);
+			do {
+				del_timer(&timerlist);
+				data = inb(io + UART_RX);
+				do_gettimeofday(&curr_tv);
+				deltv = delta(&last_tv, &curr_tv);
+				deltintrtv = delta(&last_intr_tv, &curr_tv);
+				dprintk("t %lu, d %d\n", deltintrtv, (int)data);
+				/*
+				 * if nothing came in last X cycles,
+				 * it was gap
+				 */
+				if (deltintrtv > TIME_CONST * threshold) {
+					if (last_value) {
+						dprintk("GAP\n");
+						/* simulate signal change */
+						add_read_queue(last_value,
+							       deltv -
+							       deltintrtv);
+						last_value = 0;
+						last_tv.tv_sec =
+							last_intr_tv.tv_sec;
+						last_tv.tv_usec =
+							last_intr_tv.tv_usec;
+						deltv = deltintrtv;
+					}
+				}
+				data = 1;
+				if (data ^ last_value) {
+					/*
+					 * deltintrtv > 2*TIME_CONST, remember?
+					 * the other case is timeout
+					 */
+					add_read_queue(last_value,
+						       deltv-TIME_CONST);
+					last_value = data;
+					last_tv = curr_tv;
+					if (last_tv.tv_usec >= TIME_CONST) {
+						last_tv.tv_usec -= TIME_CONST;
+					} else {
+						last_tv.tv_sec--;
+						last_tv.tv_usec += 1000000 -
+							TIME_CONST;
+					}
+				}
+				last_intr_tv = curr_tv;
+				if (data) {
+					/*
+					 * start timer for end of
+					 * sequence detection
+					 */
+					timerlist.expires = jiffies +
+								SIR_TIMEOUT;
+					add_timer(&timerlist);
+				}
+
+				lsr = inb(io + UART_LSR);
+			} while (lsr & UART_LSR_DR); /* data ready */
+			spin_unlock_irqrestore(&timer_lock, flags);
+			break;
+		default:
+			break;
+		}
+	}
+#endif
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+#ifdef LIRC_ON_SA1100
+static void send_pulse(unsigned long length)
+{
+	unsigned long k, delay;
+	int flag;
+
+	if (length == 0)
+		return;
+	/*
+	 * this won't give us the carrier frequency we really want
+	 * due to integer arithmetic, but we can accept this inaccuracy
+	 */
+
+	for (k = flag = 0; k < length; k += delay, flag = !flag) {
+		if (flag) {
+			off();
+			delay = space_width;
+		} else {
+			on();
+			delay = pulse_width;
+		}
+		safe_udelay(delay);
+	}
+	off();
+}
+
+static void send_space(unsigned long length)
+{
+	if (length == 0)
+		return;
+	off();
+	safe_udelay(length);
+}
+#else
+static void send_space(unsigned long len)
+{
+	safe_udelay(len);
+}
+
+static void send_pulse(unsigned long len)
+{
+	long bytes_out = len / TIME_CONST;
+	long time_left;
+
+	time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
+	if (bytes_out == 0) {
+		bytes_out++;
+		time_left = 0;
+	}
+	while (bytes_out--) {
+		outb(PULSE, io + UART_TX);
+		/* FIXME treba seriozne cakanie z char/serial.c */
+		while (!(inb(io + UART_LSR) & UART_LSR_THRE))
+			;
+	}
+#if 0
+	if (time_left > 0)
+		safe_udelay(time_left);
+#endif
+}
+#endif
+
+#ifdef CONFIG_SA1100_COLLIE
+static int sa1100_irda_set_power_collie(int state)
+{
+	if (state) {
+		/*
+		 *  0 - off
+		 *  1 - short range, lowest power
+		 *  2 - medium range, medium power
+		 *  3 - maximum range, high power
+		 */
+		ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
+					 TC35143_IODIR_OUTPUT);
+		ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_LOW);
+		udelay(100);
+	} else {
+		/* OFF */
+		ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
+					 TC35143_IODIR_OUTPUT);
+		ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_HIGH);
+	}
+	return 0;
+}
+#endif
+
+static int init_hardware(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hardware_lock, flags);
+	/* reset UART */
+#ifdef LIRC_ON_SA1100
+#ifdef CONFIG_SA1100_BITSY
+	if (machine_is_bitsy()) {
+		printk(KERN_INFO "Power on IR module\n");
+		set_bitsy_egpio(EGPIO_BITSY_IR_ON);
+	}
+#endif
+#ifdef CONFIG_SA1100_COLLIE
+	sa1100_irda_set_power_collie(3);	/* power on */
+#endif
+	sr.hscr0 = Ser2HSCR0;
+
+	sr.utcr0 = Ser2UTCR0;
+	sr.utcr1 = Ser2UTCR1;
+	sr.utcr2 = Ser2UTCR2;
+	sr.utcr3 = Ser2UTCR3;
+	sr.utcr4 = Ser2UTCR4;
+
+	sr.utdr = Ser2UTDR;
+	sr.utsr0 = Ser2UTSR0;
+	sr.utsr1 = Ser2UTSR1;
+
+	/* configure GPIO */
+	/* output */
+	PPDR |= PPC_TXD2;
+	PSDR |= PPC_TXD2;
+	/* set output to 0 */
+	off();
+
+	/* Enable HP-SIR modulation, and ensure that the port is disabled. */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = sr.hscr0 & (~HSCR0_HSSP);
+
+	/* clear status register to prevent unwanted interrupts */
+	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+	/* 7N1 */
+	Ser2UTCR0 = UTCR0_1StpBit|UTCR0_7BitData;
+	/* 115200 */
+	Ser2UTCR1 = 0;
+	Ser2UTCR2 = 1;
+	/* use HPSIR, 1.6 usec pulses */
+	Ser2UTCR4 = UTCR4_HPSIR|UTCR4_Z1_6us;
+
+	/* enable receiver, receive fifo interrupt */
+	Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
+
+	/* clear status register to prevent unwanted interrupts */
+	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+#elif defined(LIRC_SIR_TEKRAM)
+	/* disable FIFO */
+	soutp(UART_FCR,
+	      UART_FCR_CLEAR_RCVR|
+	      UART_FCR_CLEAR_XMIT|
+	      UART_FCR_TRIGGER_1);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* First of all, disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
+
+	/* Set DLAB 1. */
+	soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+	/* Set divisor to 12 => 9600 Baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 12);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* power supply */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	safe_udelay(50*1000);
+
+	/* -DTR low -> reset PIC */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+	udelay(1*1000);
+
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	udelay(100);
+
+
+	/* -RTS low -> send control byte */
+	soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+	udelay(7);
+	soutp(UART_TX, TEKRAM_115200|TEKRAM_PW);
+
+	/* one byte takes ~1042 usec to transmit at 9600,8N1 */
+	udelay(1500);
+
+	/* back to normal operation */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	udelay(50);
+
+	udelay(1500);
+
+	/* read previous control byte */
+	printk(KERN_INFO LIRC_DRIVER_NAME
+	       ": 0x%02x\n", sinp(UART_RX));
+
+	/* Set DLAB 1. */
+	soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+	/* Set divisor to 1 => 115200 Baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 1);
+
+	/* Set DLAB 0, 8 Bit */
+	soutp(UART_LCR, UART_LCR_WLEN8);
+	/* enable interrupts */
+	soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
+#else
+	outb(0, io + UART_MCR);
+	outb(0, io + UART_IER);
+	/* init UART */
+	/* set DLAB, speed = 115200 */
+	outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR);
+	outb(1, io + UART_DLL); outb(0, io + UART_DLM);
+	/* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */
+	outb(UART_LCR_WLEN7, io + UART_LCR);
+	/* FIFO operation */
+	outb(UART_FCR_ENABLE_FIFO, io + UART_FCR);
+	/* interrupts */
+	/* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */
+	outb(UART_IER_RDI, io + UART_IER);
+	/* turn on UART */
+	outb(UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2, io + UART_MCR);
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+	init_act200();
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+	init_act220();
+#endif
+#endif
+	spin_unlock_irqrestore(&hardware_lock, flags);
+	return 0;
+}
+
+static void drop_hardware(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hardware_lock, flags);
+
+#ifdef LIRC_ON_SA1100
+	Ser2UTCR3 = 0;
+
+	Ser2UTCR0 = sr.utcr0;
+	Ser2UTCR1 = sr.utcr1;
+	Ser2UTCR2 = sr.utcr2;
+	Ser2UTCR4 = sr.utcr4;
+	Ser2UTCR3 = sr.utcr3;
+
+	Ser2HSCR0 = sr.hscr0;
+#ifdef CONFIG_SA1100_BITSY
+	if (machine_is_bitsy())
+		clr_bitsy_egpio(EGPIO_BITSY_IR_ON);
+#endif
+#ifdef CONFIG_SA1100_COLLIE
+	sa1100_irda_set_power_collie(0);	/* power off */
+#endif
+#else
+	/* turn off interrupts */
+	outb(0, io + UART_IER);
+#endif
+	spin_unlock_irqrestore(&hardware_lock, flags);
+}
+
+/* SECTION: Initialisation */
+
+static int init_port(void)
+{
+	int retval;
+
+	/* get I/O port access and IRQ line */
+#ifndef LIRC_ON_SA1100
+	if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": i/o port 0x%.4x already in use.\n", io);
+		return -EBUSY;
+	}
+#endif
+	retval = request_irq(irq, sir_interrupt, IRQF_DISABLED,
+			     LIRC_DRIVER_NAME, NULL);
+	if (retval < 0) {
+#               ifndef LIRC_ON_SA1100
+		release_region(io, 8);
+#               endif
+		printk(KERN_ERR LIRC_DRIVER_NAME
+			": IRQ %d already in use.\n",
+			irq);
+		return retval;
+	}
+#ifndef LIRC_ON_SA1100
+	printk(KERN_INFO LIRC_DRIVER_NAME
+		": I/O port 0x%.4x, IRQ %d.\n",
+		io, irq);
+#endif
+
+	init_timer(&timerlist);
+	timerlist.function = sir_timeout;
+	timerlist.data = 0xabadcafe;
+
+	return 0;
+}
+
+static void drop_port(void)
+{
+	free_irq(irq, NULL);
+	del_timer_sync(&timerlist);
+#ifndef LIRC_ON_SA1100
+	release_region(io, 8);
+#endif
+}
+
+#ifdef LIRC_SIR_ACTISYS_ACT200L
+/* Crystal/Cirrus CS8130 IR transceiver, used in Actisys Act200L dongle */
+/* some code borrowed from Linux IRDA driver */
+
+/* Register 0: Control register #1 */
+#define ACT200L_REG0    0x00
+#define ACT200L_TXEN    0x01 /* Enable transmitter */
+#define ACT200L_RXEN    0x02 /* Enable receiver */
+#define ACT200L_ECHO    0x08 /* Echo control chars */
+
+/* Register 1: Control register #2 */
+#define ACT200L_REG1    0x10
+#define ACT200L_LODB    0x01 /* Load new baud rate count value */
+#define ACT200L_WIDE    0x04 /* Expand the maximum allowable pulse */
+
+/* Register 3: Transmit mode register #2 */
+#define ACT200L_REG3    0x30
+#define ACT200L_B0      0x01 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P)  */
+#define ACT200L_B1      0x02 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P)  */
+#define ACT200L_CHSY    0x04 /* StartBit Synced 0=bittime, 1=startbit */
+
+/* Register 4: Output Power register */
+#define ACT200L_REG4    0x40
+#define ACT200L_OP0     0x01 /* Enable LED1C output */
+#define ACT200L_OP1     0x02 /* Enable LED2C output */
+#define ACT200L_BLKR    0x04
+
+/* Register 5: Receive Mode register */
+#define ACT200L_REG5    0x50
+#define ACT200L_RWIDL   0x01 /* fixed 1.6us pulse mode */
+    /*.. other various IRDA bit modes, and TV remote modes..*/
+
+/* Register 6: Receive Sensitivity register #1 */
+#define ACT200L_REG6    0x60
+#define ACT200L_RS0     0x01 /* receive threshold bit 0 */
+#define ACT200L_RS1     0x02 /* receive threshold bit 1 */
+
+/* Register 7: Receive Sensitivity register #2 */
+#define ACT200L_REG7    0x70
+#define ACT200L_ENPOS   0x04 /* Ignore the falling edge */
+
+/* Register 8,9: Baud Rate Divider register #1,#2 */
+#define ACT200L_REG8    0x80
+#define ACT200L_REG9    0x90
+
+#define ACT200L_2400    0x5f
+#define ACT200L_9600    0x17
+#define ACT200L_19200   0x0b
+#define ACT200L_38400   0x05
+#define ACT200L_57600   0x03
+#define ACT200L_115200  0x01
+
+/* Register 13: Control register #3 */
+#define ACT200L_REG13   0xd0
+#define ACT200L_SHDW    0x01 /* Enable access to shadow registers */
+
+/* Register 15: Status register */
+#define ACT200L_REG15   0xf0
+
+/* Register 21: Control register #4 */
+#define ACT200L_REG21   0x50
+#define ACT200L_EXCK    0x02 /* Disable clock output driver */
+#define ACT200L_OSCL    0x04 /* oscillator in low power, medium accuracy mode */
+
+static void init_act200(void)
+{
+	int i;
+	__u8 control[] = {
+		ACT200L_REG15,
+		ACT200L_REG13 | ACT200L_SHDW,
+		ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
+		ACT200L_REG13,
+		ACT200L_REG7  | ACT200L_ENPOS,
+		ACT200L_REG6  | ACT200L_RS0  | ACT200L_RS1,
+		ACT200L_REG5  | ACT200L_RWIDL,
+		ACT200L_REG4  | ACT200L_OP0  | ACT200L_OP1 | ACT200L_BLKR,
+		ACT200L_REG3  | ACT200L_B0,
+		ACT200L_REG0  | ACT200L_TXEN | ACT200L_RXEN,
+		ACT200L_REG8 |  (ACT200L_115200       & 0x0f),
+		ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f),
+		ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE
+	};
+
+	/* Set DLAB 1. */
+	soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+
+	/* Set divisor to 12 => 9600 Baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 12);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, UART_LCR_WLEN8);
+	/* Set divisor to 12 => 9600 Baud */
+
+	/* power supply */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	for (i = 0; i < 50; i++)
+		safe_udelay(1000);
+
+		/* Reset the dongle : set RTS low for 25 ms */
+	soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+	for (i = 0; i < 25; i++)
+		udelay(1000);
+
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	udelay(100);
+
+	/* Clear DTR and set RTS to enter command mode */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+	udelay(7);
+
+	/* send out the control register settings for 115K 7N1 SIR operation */
+	for (i = 0; i < sizeof(control); i++) {
+		soutp(UART_TX, control[i]);
+		/* one byte takes ~1042 usec to transmit at 9600,8N1 */
+		udelay(1500);
+	}
+
+	/* back to normal operation */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	udelay(50);
+
+	udelay(1500);
+	soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+
+	/* Set DLAB 1. */
+	soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
+
+	/* Set divisor to 1 => 115200 Baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 1);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* Set DLAB 0, 7 Bit */
+	soutp(UART_LCR, UART_LCR_WLEN7);
+
+	/* enable interrupts */
+	soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
+}
+#endif
+
+#ifdef LIRC_SIR_ACTISYS_ACT220L
+/*
+ * Derived from linux IrDA driver (net/irda/actisys.c)
+ * Drop me a mail for any kind of comment: maxx@spaceboyz.net
+ */
+
+void init_act220(void)
+{
+	int i;
+
+	/* DLAB 1 */
+	soutp(UART_LCR, UART_LCR_DLAB|UART_LCR_WLEN7);
+
+	/* 9600 baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 12);
+
+	/* DLAB 0 */
+	soutp(UART_LCR, UART_LCR_WLEN7);
+
+	/* reset the dongle, set DTR low for 10us */
+	soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
+	udelay(10);
+
+	/* back to normal (still 9600) */
+	soutp(UART_MCR, UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2);
+
+	/*
+	 * send RTS pulses until we reach 115200
+	 * i hope this is really the same for act220l/act220l+
+	 */
+	for (i = 0; i < 3; i++) {
+		udelay(10);
+		/* set RTS low for 10 us */
+		soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
+		udelay(10);
+		/* set RTS high for 10 us */
+		soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
+	}
+
+	/* back to normal operation */
+	udelay(1500); /* better safe than sorry ;) */
+
+	/* Set DLAB 1. */
+	soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
+
+	/* Set divisor to 1 => 115200 Baud */
+	soutp(UART_DLM, 0);
+	soutp(UART_DLL, 1);
+
+	/* Set DLAB 0, 7 Bit */
+	/* The dongle doesn't seem to have any problems with operation at 7N1 */
+	soutp(UART_LCR, UART_LCR_WLEN7);
+
+	/* enable interrupts */
+	soutp(UART_IER, UART_IER_RDI);
+}
+#endif
+
+static int init_lirc_sir(void)
+{
+	int retval;
+
+	init_waitqueue_head(&lirc_read_queue);
+	retval = init_port();
+	if (retval < 0)
+		return retval;
+	init_hardware();
+	printk(KERN_INFO LIRC_DRIVER_NAME
+		": Installed.\n");
+	return 0;
+}
+
+
+static int __init lirc_sir_init(void)
+{
+	int retval;
+
+	retval = init_chrdev();
+	if (retval < 0)
+		return retval;
+	retval = init_lirc_sir();
+	if (retval) {
+		drop_chrdev();
+		return retval;
+	}
+	return 0;
+}
+
+static void __exit lirc_sir_exit(void)
+{
+	drop_hardware();
+	drop_chrdev();
+	drop_port();
+	printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n");
+}
+
+module_init(lirc_sir_init);
+module_exit(lirc_sir_exit);
+
+#ifdef LIRC_SIR_TEKRAM
+MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210");
+MODULE_AUTHOR("Christoph Bartelmus");
+#elif defined(LIRC_ON_SA1100)
+MODULE_DESCRIPTION("LIRC driver for StrongARM SA1100 embedded microprocessor");
+MODULE_AUTHOR("Christoph Bartelmus");
+#elif defined(LIRC_SIR_ACTISYS_ACT200L)
+MODULE_DESCRIPTION("LIRC driver for Actisys Act200L");
+MODULE_AUTHOR("Karl Bongers");
+#elif defined(LIRC_SIR_ACTISYS_ACT220L)
+MODULE_DESCRIPTION("LIRC driver for Actisys Act220L(+)");
+MODULE_AUTHOR("Jan Roemisch");
+#else
+MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports");
+MODULE_AUTHOR("Milan Pikula");
+#endif
+MODULE_LICENSE("GPL");
+
+#ifdef LIRC_ON_SA1100
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (16)");
+#else
+module_param(io, int, S_IRUGO);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+module_param(irq, int, S_IRUGO);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(threshold, int, S_IRUGO);
+MODULE_PARM_DESC(threshold, "space detection threshold (3)");
+#endif
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_streamzap.c b/drivers/staging/lirc/lirc_streamzap.c
new file mode 100644
index 00000000000..be09c103f0c
--- /dev/null
+++ b/drivers/staging/lirc/lirc_streamzap.c
@@ -0,0 +1,821 @@
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+#define DRIVER_VERSION	"1.28"
+#define DRIVER_NAME	"lirc_streamzap"
+#define DRIVER_DESC	"Streamzap Remote Control driver"
+
+static int debug;
+
+#define USB_STREAMZAP_VENDOR_ID		0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID	0x0000
+
+/* Use our own dbg macro */
+#define dprintk(fmt, args...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG DRIVER_NAME "[%d]: "	\
+			       fmt "\n", ## args);		\
+	} while (0)
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+	/* Streamzap Remote Control */
+	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+	/* Terminating entry */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define STREAMZAP_PULSE_MASK 0xf0
+#define STREAMZAP_SPACE_MASK 0x0f
+#define STREAMZAP_TIMEOUT    0xff
+#define STREAMZAP_RESOLUTION 256
+
+/* number of samples buffered */
+#define STREAMZAP_BUF_LEN 128
+
+enum StreamzapDecoderState {
+	PulseSpace,
+	FullPulse,
+	FullSpace,
+	IgnorePulse
+};
+
+/* Structure to hold all of our device specific stuff
+ *
+ * some remarks regarding locking:
+ * theoretically this struct can be accessed from three threads:
+ *
+ * - from lirc_dev through set_use_inc/set_use_dec
+ *
+ * - from the USB layer throuh probe/disconnect/irq
+ *
+ *   Careful placement of lirc_register_driver/lirc_unregister_driver
+ *   calls will prevent conflicts. lirc_dev makes sure that
+ *   set_use_inc/set_use_dec are not being executed and will not be
+ *   called after lirc_unregister_driver returns.
+ *
+ * - by the timer callback
+ *
+ *   The timer is only running when the device is connected and the
+ *   LIRC device is open. Making sure the timer is deleted by
+ *   set_use_dec will make conflicts impossible.
+ */
+struct usb_streamzap {
+
+	/* usb */
+	/* save off the usb device pointer */
+	struct usb_device	*udev;
+	/* the interface for this device */
+	struct usb_interface	*interface;
+
+	/* buffer & dma */
+	unsigned char		*buf_in;
+	dma_addr_t		dma_in;
+	unsigned int		buf_in_len;
+
+	struct usb_endpoint_descriptor *endpoint;
+
+	/* IRQ */
+	struct urb		*urb_in;
+
+	/* lirc */
+	struct lirc_driver	*driver;
+	struct lirc_buffer	*delay_buf;
+
+	/* timer used to support delay buffering */
+	struct timer_list	delay_timer;
+	int			timer_running;
+	spinlock_t		timer_lock;
+
+	/* tracks whether we are currently receiving some signal */
+	int			idle;
+	/* sum of signal lengths received since signal start */
+	unsigned long		sum;
+	/* start time of signal; necessary for gap tracking */
+	struct timeval		signal_last;
+	struct timeval		signal_start;
+	enum StreamzapDecoderState decoder_state;
+	struct timer_list	flush_timer;
+	int			flush;
+	int			in_use;
+	int			timeout_enabled;
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void usb_streamzap_irq(struct urb *urb);
+static int streamzap_use_inc(void *data);
+static void streamzap_use_dec(void *data);
+static long streamzap_ioctl(struct file *filep, unsigned int cmd,
+			    unsigned long arg);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+
+static struct usb_driver streamzap_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	streamzap_probe,
+	.disconnect =	streamzap_disconnect,
+	.suspend =	streamzap_suspend,
+	.resume =	streamzap_resume,
+	.id_table =	streamzap_table,
+};
+
+static void stop_timer(struct usb_streamzap *sz)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (sz->timer_running) {
+		sz->timer_running = 0;
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+		del_timer_sync(&sz->delay_timer);
+	} else {
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+	}
+}
+
+static void flush_timeout(unsigned long arg)
+{
+	struct usb_streamzap *sz = (struct usb_streamzap *) arg;
+
+	/* finally start accepting data */
+	sz->flush = 0;
+}
+static void delay_timeout(unsigned long arg)
+{
+	unsigned long flags;
+	/* deliver data every 10 ms */
+	static unsigned long timer_inc =
+		(10000/(1000000/HZ)) == 0 ? 1 : (10000/(1000000/HZ));
+	struct usb_streamzap *sz = (struct usb_streamzap *) arg;
+	int data;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+
+	if (!lirc_buffer_empty(sz->delay_buf) &&
+	    !lirc_buffer_full(sz->driver->rbuf)) {
+		lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
+		lirc_buffer_write(sz->driver->rbuf, (unsigned char *) &data);
+	}
+	if (!lirc_buffer_empty(sz->delay_buf)) {
+		while (lirc_buffer_available(sz->delay_buf) <
+		       STREAMZAP_BUF_LEN / 2 &&
+		       !lirc_buffer_full(sz->driver->rbuf)) {
+			lirc_buffer_read(sz->delay_buf,
+					   (unsigned char *) &data);
+			lirc_buffer_write(sz->driver->rbuf,
+					    (unsigned char *) &data);
+		}
+		if (sz->timer_running) {
+			sz->delay_timer.expires = jiffies + timer_inc;
+			add_timer(&sz->delay_timer);
+		}
+	} else {
+		sz->timer_running = 0;
+	}
+
+	if (!lirc_buffer_empty(sz->driver->rbuf))
+		wake_up(&sz->driver->rbuf->wait_poll);
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void flush_delay_buffer(struct usb_streamzap *sz)
+{
+	int data;
+	int empty = 1;
+
+	while (!lirc_buffer_empty(sz->delay_buf)) {
+		empty = 0;
+		lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
+		if (!lirc_buffer_full(sz->driver->rbuf)) {
+			lirc_buffer_write(sz->driver->rbuf,
+					    (unsigned char *) &data);
+		} else {
+			dprintk("buffer overflow", sz->driver->minor);
+		}
+	}
+	if (!empty)
+		wake_up(&sz->driver->rbuf->wait_poll);
+}
+
+static void push(struct usb_streamzap *sz, unsigned char *data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (lirc_buffer_full(sz->delay_buf)) {
+		int read_data;
+
+		lirc_buffer_read(sz->delay_buf,
+				   (unsigned char *) &read_data);
+		if (!lirc_buffer_full(sz->driver->rbuf)) {
+			lirc_buffer_write(sz->driver->rbuf,
+					    (unsigned char *) &read_data);
+		} else {
+			dprintk("buffer overflow", sz->driver->minor);
+		}
+	}
+
+	lirc_buffer_write(sz->delay_buf, data);
+
+	if (!sz->timer_running) {
+		sz->delay_timer.expires = jiffies + HZ/10;
+		add_timer(&sz->delay_timer);
+		sz->timer_running = 1;
+	}
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void push_full_pulse(struct usb_streamzap *sz,
+			    unsigned char value)
+{
+	int pulse;
+
+	if (sz->idle) {
+		long deltv;
+		int tmp;
+
+		sz->signal_last = sz->signal_start;
+		do_gettimeofday(&sz->signal_start);
+
+		deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec;
+		if (deltv > 15) {
+			/* really long time */
+			tmp = LIRC_SPACE(LIRC_VALUE_MASK);
+		} else {
+			tmp = (int) (deltv*1000000+
+					sz->signal_start.tv_usec -
+					sz->signal_last.tv_usec);
+			tmp -= sz->sum;
+			tmp = LIRC_SPACE(tmp);
+		}
+		dprintk("ls %u", sz->driver->minor, tmp);
+		push(sz, (char *)&tmp);
+
+		sz->idle = 0;
+		sz->sum = 0;
+	}
+
+	pulse = ((int) value) * STREAMZAP_RESOLUTION;
+	pulse += STREAMZAP_RESOLUTION / 2;
+	sz->sum += pulse;
+	pulse = LIRC_PULSE(pulse);
+
+	dprintk("p %u", sz->driver->minor, pulse & PULSE_MASK);
+	push(sz, (char *)&pulse);
+}
+
+static void push_half_pulse(struct usb_streamzap *sz,
+			    unsigned char value)
+{
+	push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK)>>4);
+}
+
+static void push_full_space(struct usb_streamzap *sz,
+			    unsigned char value)
+{
+	int space;
+
+	space = ((int) value)*STREAMZAP_RESOLUTION;
+	space += STREAMZAP_RESOLUTION/2;
+	sz->sum += space;
+	space = LIRC_SPACE(space);
+	dprintk("s %u", sz->driver->minor, space);
+	push(sz, (char *)&space);
+}
+
+static void push_half_space(struct usb_streamzap *sz,
+			    unsigned char value)
+{
+	push_full_space(sz, value & STREAMZAP_SPACE_MASK);
+}
+
+/**
+ * usb_streamzap_irq - IRQ handler
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void usb_streamzap_irq(struct urb *urb)
+{
+	struct usb_streamzap *sz;
+	int		len;
+	unsigned int	i = 0;
+
+	if (!urb)
+		return;
+
+	sz = urb->context;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/*
+		 * this urb is terminated, clean up.
+		 * sz might already be invalid at this point
+		 */
+		dprintk("urb status: %d", -1, urb->status);
+		return;
+	default:
+		break;
+	}
+
+	dprintk("received %d", sz->driver->minor, urb->actual_length);
+	if (!sz->flush) {
+		for (i = 0; i < urb->actual_length; i++) {
+			dprintk("%d: %x", sz->driver->minor,
+				i, (unsigned char) sz->buf_in[i]);
+			switch (sz->decoder_state) {
+			case PulseSpace:
+				if ((sz->buf_in[i]&STREAMZAP_PULSE_MASK) ==
+				    STREAMZAP_PULSE_MASK) {
+					sz->decoder_state = FullPulse;
+					continue;
+				} else if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK)
+					   == STREAMZAP_SPACE_MASK) {
+					push_half_pulse(sz, sz->buf_in[i]);
+					sz->decoder_state = FullSpace;
+					continue;
+				} else {
+					push_half_pulse(sz, sz->buf_in[i]);
+					push_half_space(sz, sz->buf_in[i]);
+				}
+				break;
+			case FullPulse:
+				push_full_pulse(sz, sz->buf_in[i]);
+				sz->decoder_state = IgnorePulse;
+				break;
+			case FullSpace:
+				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
+					sz->idle = 1;
+					stop_timer(sz);
+					if (sz->timeout_enabled) {
+						int timeout =
+							LIRC_TIMEOUT
+							(STREAMZAP_TIMEOUT *
+							STREAMZAP_RESOLUTION);
+						push(sz, (char *)&timeout);
+					}
+					flush_delay_buffer(sz);
+				} else
+					push_full_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			case IgnorePulse:
+				if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
+				    STREAMZAP_SPACE_MASK) {
+					sz->decoder_state = FullSpace;
+					continue;
+				}
+				push_half_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			}
+		}
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+
+	return;
+}
+
+static const struct file_operations streamzap_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= streamzap_ioctl,
+	.read		= lirc_dev_fop_read,
+	.write		= lirc_dev_fop_write,
+	.poll		= lirc_dev_fop_poll,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+};
+
+
+/**
+ *	streamzap_probe
+ *
+ *	Called by usb-core to associated with a candidate device
+ *	On any failure the return value is the ERROR
+ *	On success return 0
+ */
+static int streamzap_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_host;
+	struct usb_streamzap *sz;
+	struct lirc_driver *driver;
+	struct lirc_buffer *lirc_buf;
+	struct lirc_buffer *delay_buf;
+	char buf[63], name[128] = "";
+	int retval = -ENOMEM;
+	int minor = 0;
+
+	/* Allocate space for device driver specific data */
+	sz = kzalloc(sizeof(struct usb_streamzap), GFP_KERNEL);
+	if (sz == NULL)
+		return -ENOMEM;
+
+	sz->udev = udev;
+	sz->interface = interface;
+
+	/* Check to ensure endpoint information matches requirements */
+	iface_host = interface->cur_altsetting;
+
+	if (iface_host->desc.bNumEndpoints != 1) {
+		err("%s: Unexpected desc.bNumEndpoints (%d)", __func__,
+		    iface_host->desc.bNumEndpoints);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	sz->endpoint = &(iface_host->endpoint[0].desc);
+	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	    != USB_DIR_IN) {
+		err("%s: endpoint doesn't match input device 02%02x",
+		    __func__, sz->endpoint->bEndpointAddress);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	    != USB_ENDPOINT_XFER_INT) {
+		err("%s: endpoint attributes don't match xfer 02%02x",
+		    __func__, sz->endpoint->bmAttributes);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	if (sz->endpoint->wMaxPacketSize == 0) {
+		err("%s: endpoint message size==0? ", __func__);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	/* Allocate the USB buffer and IRQ URB */
+
+	sz->buf_in_len = sz->endpoint->wMaxPacketSize;
+	sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len,
+				      GFP_ATOMIC, &sz->dma_in);
+	if (sz->buf_in == NULL)
+		goto free_sz;
+
+	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (sz->urb_in == NULL)
+		goto free_sz;
+
+	/* Connect this device to the LIRC sub-system */
+	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!driver)
+		goto free_sz;
+
+	lirc_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!lirc_buf)
+		goto free_driver;
+	if (lirc_buffer_init(lirc_buf, sizeof(int), STREAMZAP_BUF_LEN))
+		goto kfree_lirc_buf;
+
+	delay_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!delay_buf)
+		goto free_lirc_buf;
+	if (lirc_buffer_init(delay_buf, sizeof(int), STREAMZAP_BUF_LEN))
+		goto kfree_delay_buf;
+
+	sz->driver = driver;
+	strcpy(sz->driver->name, DRIVER_NAME);
+	sz->driver->minor = -1;
+	sz->driver->sample_rate = 0;
+	sz->driver->code_length = sizeof(int) * 8;
+	sz->driver->features = LIRC_CAN_REC_MODE2 |
+		LIRC_CAN_GET_REC_RESOLUTION |
+		LIRC_CAN_SET_REC_TIMEOUT;
+	sz->driver->data = sz;
+	sz->driver->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
+	sz->driver->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
+	sz->driver->rbuf = lirc_buf;
+	sz->delay_buf = delay_buf;
+	sz->driver->set_use_inc = &streamzap_use_inc;
+	sz->driver->set_use_dec = &streamzap_use_dec;
+	sz->driver->fops = &streamzap_fops;
+	sz->driver->dev = &interface->dev;
+	sz->driver->owner = THIS_MODULE;
+
+	sz->idle = 1;
+	sz->decoder_state = PulseSpace;
+	init_timer(&sz->delay_timer);
+	sz->delay_timer.function = delay_timeout;
+	sz->delay_timer.data = (unsigned long) sz;
+	sz->timer_running = 0;
+	spin_lock_init(&sz->timer_lock);
+
+	init_timer(&sz->flush_timer);
+	sz->flush_timer.function = flush_timeout;
+	sz->flush_timer.data = (unsigned long) sz;
+	/* Complete final initialisations */
+
+	usb_fill_int_urb(sz->urb_in, udev,
+		usb_rcvintpipe(udev, sz->endpoint->bEndpointAddress),
+		sz->buf_in, sz->buf_in_len, usb_streamzap_irq, sz,
+		sz->endpoint->bInterval);
+	sz->urb_in->transfer_dma = sz->dma_in;
+	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	if (udev->descriptor.iManufacturer
+	    && usb_string(udev, udev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+
+	if (udev->descriptor.iProduct
+	    && usb_string(udev, udev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	minor = lirc_register_driver(driver);
+
+	if (minor < 0)
+		goto free_delay_buf;
+
+	sz->driver->minor = minor;
+
+	usb_set_intfdata(interface, sz);
+
+	printk(KERN_INFO DRIVER_NAME "[%d]: %s on usb%d:%d attached\n",
+	       sz->driver->minor, name,
+	       udev->bus->busnum, sz->udev->devnum);
+
+	return 0;
+
+free_delay_buf:
+	lirc_buffer_free(sz->delay_buf);
+kfree_delay_buf:
+	kfree(delay_buf);
+free_lirc_buf:
+	lirc_buffer_free(sz->driver->rbuf);
+kfree_lirc_buf:
+	kfree(lirc_buf);
+free_driver:
+	kfree(driver);
+free_sz:
+	if (retval == -ENOMEM)
+		err("Out of memory");
+
+	if (sz) {
+		usb_free_urb(sz->urb_in);
+		usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+		kfree(sz);
+	}
+
+	return retval;
+}
+
+static int streamzap_use_inc(void *data)
+{
+	struct usb_streamzap *sz = data;
+
+	if (!sz) {
+		dprintk("%s called with no context", -1, __func__);
+		return -EINVAL;
+	}
+	dprintk("set use inc", sz->driver->minor);
+
+	lirc_buffer_clear(sz->driver->rbuf);
+	lirc_buffer_clear(sz->delay_buf);
+
+	sz->flush_timer.expires = jiffies + HZ;
+	sz->flush = 1;
+	add_timer(&sz->flush_timer);
+
+	sz->urb_in->dev = sz->udev;
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+		dprintk("open result = -EIO error submitting urb",
+			sz->driver->minor);
+		return -EIO;
+	}
+	sz->in_use++;
+
+	return 0;
+}
+
+static void streamzap_use_dec(void *data)
+{
+	struct usb_streamzap *sz = data;
+
+	if (!sz) {
+		dprintk("%s called with no context", -1, __func__);
+		return;
+	}
+	dprintk("set use dec", sz->driver->minor);
+
+	if (sz->flush) {
+		sz->flush = 0;
+		del_timer_sync(&sz->flush_timer);
+	}
+
+	usb_kill_urb(sz->urb_in);
+
+	stop_timer(sz);
+
+	sz->in_use--;
+}
+
+static long streamzap_ioctl(struct file *filep, unsigned int cmd,
+			    unsigned long arg)
+{
+	int result = 0;
+	int val;
+	struct usb_streamzap *sz = lirc_get_pdata(filep);
+
+	switch (cmd) {
+	case LIRC_GET_REC_RESOLUTION:
+		result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg);
+		break;
+	case LIRC_SET_REC_TIMEOUT:
+		result = get_user(val, (int *)arg);
+		if (result == 0) {
+			if (val == STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION)
+				sz->timeout_enabled = 1;
+			else if (val == 0)
+				sz->timeout_enabled = 0;
+			else
+				result = -EINVAL;
+		}
+		break;
+	default:
+		return lirc_dev_fop_ioctl(filep, cmd, arg);
+	}
+	return result;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->udev.  It is also supposed to terminate any currently
+ * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+	struct usb_streamzap *sz;
+	int errnum;
+	int minor;
+
+	sz = usb_get_intfdata(interface);
+
+	/* unregister from the LIRC sub-system */
+
+	errnum = lirc_unregister_driver(sz->driver->minor);
+	if (errnum != 0)
+		dprintk("error in lirc_unregister: (returned %d)",
+			sz->driver->minor, errnum);
+
+	lirc_buffer_free(sz->delay_buf);
+	lirc_buffer_free(sz->driver->rbuf);
+
+	/* unregister from the USB sub-system */
+
+	usb_free_urb(sz->urb_in);
+
+	usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+	minor = sz->driver->minor;
+	kfree(sz->driver->rbuf);
+	kfree(sz->driver);
+	kfree(sz->delay_buf);
+	kfree(sz);
+
+	printk(KERN_INFO DRIVER_NAME "[%d]: disconnected\n", minor);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_streamzap *sz = usb_get_intfdata(intf);
+
+	printk(KERN_INFO DRIVER_NAME "[%d]: suspend\n", sz->driver->minor);
+	if (sz->in_use) {
+		if (sz->flush) {
+			sz->flush = 0;
+			del_timer_sync(&sz->flush_timer);
+		}
+
+		stop_timer(sz);
+
+		usb_kill_urb(sz->urb_in);
+	}
+	return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+	struct usb_streamzap *sz = usb_get_intfdata(intf);
+
+	lirc_buffer_clear(sz->driver->rbuf);
+	lirc_buffer_clear(sz->delay_buf);
+
+	if (sz->in_use) {
+		sz->flush_timer.expires = jiffies + HZ;
+		sz->flush = 1;
+		add_timer(&sz->flush_timer);
+
+		sz->urb_in->dev = sz->udev;
+		if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+			dprintk("open result = -EIO error submitting urb",
+				sz->driver->minor);
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	usb_streamzap_init
+ */
+static int __init usb_streamzap_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&streamzap_driver);
+
+	if (result) {
+		err("usb_register failed. Error number %d",
+		    result);
+		return result;
+	}
+
+	printk(KERN_INFO DRIVER_NAME " " DRIVER_VERSION " registered\n");
+	return 0;
+}
+
+/**
+ *	usb_streamzap_exit
+ */
+static void __exit usb_streamzap_exit(void)
+{
+	usb_deregister(&streamzap_driver);
+}
+
+
+module_init(usb_streamzap_init);
+module_exit(usb_streamzap_exit);
+
+MODULE_AUTHOR("Christoph Bartelmus, Greg Wickham, Adrian Dewhurst");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/lirc/lirc_ttusbir.c
new file mode 100644
index 00000000000..e345ab9a004
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ttusbir.c
@@ -0,0 +1,396 @@
+/*
+ * lirc_ttusbir.c
+ *
+ * lirc_ttusbir - LIRC device driver for the TechnoTrend USB IR Receiver
+ *
+ * Copyright (C) 2007 Stefan Macher <st_maker-lirc@yahoo.de>
+ *
+ * This LIRC driver provides access to the TechnoTrend USB IR Receiver.
+ * The receiver delivers the IR signal as raw sampled true/false data in
+ * isochronous USB packets each of size 128 byte.
+ * Currently the driver reduces the sampling rate by factor of 8 as this
+ * is still more than enough to decode RC-5 - others should be analyzed.
+ * But the driver does not rely on RC-5 it should be able to decode every
+ * IR signal that is not too fast.
+ */
+
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+MODULE_DESCRIPTION("TechnoTrend USB IR device driver for LIRC");
+MODULE_AUTHOR("Stefan Macher (st_maker-lirc@yahoo.de)");
+MODULE_LICENSE("GPL");
+
+/* #define DEBUG */
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(_x_, a...)
+#endif
+
+/* function declarations */
+static int probe(struct usb_interface *intf, const struct usb_device_id *id);
+static void disconnect(struct usb_interface *intf);
+static void urb_complete(struct urb *urb);
+static int set_use_inc(void *data);
+static void set_use_dec(void *data);
+
+static int num_urbs = 2;
+module_param(num_urbs, int, S_IRUGO);
+MODULE_PARM_DESC(num_urbs,
+		 "Number of URBs in queue. Try to increase to 4 in case "
+		 "of problems (default: 2; minimum: 2)");
+
+/* table of devices that work with this driver */
+static struct usb_device_id device_id_table[] = {
+	/* TechnoTrend USB IR Receiver */
+	{ USB_DEVICE(0x0B48, 0x2003) },
+	/* Terminating entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, device_id_table);
+
+/* USB driver definition */
+static struct usb_driver usb_driver = {
+	.name = "TTUSBIR",
+	.id_table = &(device_id_table[0]),
+	.probe = probe,
+	.disconnect = disconnect,
+};
+
+/* USB device definition */
+struct ttusbir_device {
+	struct usb_driver *usb_driver;
+	struct usb_device *udev;
+	struct usb_interface *interf;
+	struct usb_class_driver class_driver;
+	unsigned int ifnum; /* Interface number to use */
+	unsigned int alt_setting; /* alternate setting to use */
+	unsigned int endpoint; /* Endpoint to use */
+	struct urb **urb; /* num_urb URB pointers*/
+	char **buffer; /* 128 byte buffer for each URB */
+	struct lirc_buffer rbuf; /* Buffer towards LIRC */
+	struct lirc_driver driver;
+	int minor;
+	int last_pulse; /* remembers if last received byte was pulse or space */
+	int last_num; /* remembers how many last bytes appeared */
+	int opened;
+};
+
+/*** LIRC specific functions ***/
+static int set_use_inc(void *data)
+{
+	int i, retval;
+	struct ttusbir_device *ttusbir = data;
+
+	DPRINTK("Sending first URBs\n");
+	/* @TODO Do I need to check if I am already opened */
+	ttusbir->opened = 1;
+
+	for (i = 0; i < num_urbs; i++) {
+		retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL);
+		if (retval) {
+			err("%s: usb_submit_urb failed on urb %d",
+			    __func__, i);
+			return retval;
+		}
+	}
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{
+	struct ttusbir_device *ttusbir = data;
+
+	DPRINTK("Device closed\n");
+
+	ttusbir->opened = 0;
+}
+
+/*** USB specific functions ***/
+
+/*
+ * This mapping table is used to do a very simple filtering of the
+ * input signal.
+ * For a value with at least 4 bits set it returns 0xFF otherwise
+ * 0x00.  For faster IR signals this can not be used. But for RC-5 we
+ * still have about 14 samples per pulse/space, i.e. we sample with 14
+ * times higher frequency than the signal frequency
+ */
+const unsigned char map_table[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
+	0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+static void urb_complete(struct urb *urb)
+{
+	struct ttusbir_device *ttusbir;
+	unsigned char *buf;
+	int i;
+	int l;
+
+	ttusbir = urb->context;
+
+	if (!ttusbir->opened)
+		return;
+
+	buf = (unsigned char *)urb->transfer_buffer;
+
+	for (i = 0; i < 128; i++) {
+		/* Here we do the filtering and some kind of down sampling */
+		buf[i] = ~map_table[buf[i]];
+		if (ttusbir->last_pulse == buf[i]) {
+			if (ttusbir->last_num < PULSE_MASK/63)
+				ttusbir->last_num++;
+		/*
+		 * else we are in a idle period and do not need to
+		 * increment any longer
+		 */
+		} else {
+			l = ttusbir->last_num * 62; /* about 62 = us/byte */
+			if (ttusbir->last_pulse) /* pulse or space? */
+				l |= PULSE_BIT;
+			if (!lirc_buffer_full(&ttusbir->rbuf)) {
+				lirc_buffer_write(&ttusbir->rbuf, (void *)&l);
+				wake_up_interruptible(&ttusbir->rbuf.wait_poll);
+			}
+			ttusbir->last_num = 0;
+			ttusbir->last_pulse = buf[i];
+		}
+	}
+	usb_submit_urb(urb, GFP_ATOMIC); /* keep data rolling :-) */
+}
+
+/*
+ * Called whenever the USB subsystem thinks we could be the right driver
+ * to handle this device
+ */
+static int probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	int alt_set, endp;
+	int found = 0;
+	int i, j;
+	int struct_size;
+	struct usb_host_interface *host_interf;
+	struct usb_interface_descriptor *interf_desc;
+	struct usb_host_endpoint *host_endpoint;
+	struct ttusbir_device *ttusbir;
+
+	DPRINTK("Module ttusbir probe\n");
+
+	/* To reduce memory fragmentation we use only one allocation */
+	struct_size =  sizeof(struct ttusbir_device) +
+		(sizeof(struct urb *) * num_urbs) +
+		(sizeof(char *) * num_urbs) +
+		(num_urbs * 128);
+	ttusbir = kzalloc(struct_size, GFP_KERNEL);
+	if (!ttusbir)
+		return -ENOMEM;
+
+	ttusbir->urb = (struct urb **)((char *)ttusbir +
+				      sizeof(struct ttusbir_device));
+	ttusbir->buffer = (char **)((char *)ttusbir->urb +
+				   (sizeof(struct urb *) * num_urbs));
+	for (i = 0; i < num_urbs; i++)
+		ttusbir->buffer[i] = (char *)ttusbir->buffer +
+			(sizeof(char *)*num_urbs) + (i * 128);
+
+	ttusbir->usb_driver = &usb_driver;
+	ttusbir->alt_setting = -1;
+	/* @TODO check if error can be returned */
+	ttusbir->udev = usb_get_dev(interface_to_usbdev(intf));
+	ttusbir->interf = intf;
+	ttusbir->last_pulse = 0x00;
+	ttusbir->last_num = 0;
+
+	/*
+	 * Now look for interface setting we can handle
+	 * We are searching for the alt setting where end point
+	 * 0x82 has max packet size 16
+	 */
+	for (alt_set = 0; alt_set < intf->num_altsetting && !found; alt_set++) {
+		host_interf = &intf->altsetting[alt_set];
+		interf_desc = &host_interf->desc;
+		for (endp = 0; endp < interf_desc->bNumEndpoints; endp++) {
+			host_endpoint = &host_interf->endpoint[endp];
+			if ((host_endpoint->desc.bEndpointAddress == 0x82) &&
+			    (host_endpoint->desc.wMaxPacketSize == 0x10)) {
+				ttusbir->alt_setting = alt_set;
+				ttusbir->endpoint = endp;
+				found = 1;
+				break;
+			}
+		}
+	}
+	if (ttusbir->alt_setting != -1)
+		DPRINTK("alt setting: %d\n", ttusbir->alt_setting);
+	else {
+		err("Could not find alternate setting\n");
+		kfree(ttusbir);
+		return -EINVAL;
+	}
+
+	/* OK lets setup this interface setting */
+	usb_set_interface(ttusbir->udev, 0, ttusbir->alt_setting);
+
+	/* Store device info in interface structure */
+	usb_set_intfdata(intf, ttusbir);
+
+	/* Register as a LIRC driver */
+	if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) {
+		err("Could not get memory for LIRC data buffer\n");
+		usb_set_intfdata(intf, NULL);
+		kfree(ttusbir);
+		return -ENOMEM;
+	}
+	strcpy(ttusbir->driver.name, "TTUSBIR");
+	ttusbir->driver.minor = -1;
+	ttusbir->driver.code_length = 1;
+	ttusbir->driver.sample_rate = 0;
+	ttusbir->driver.data = ttusbir;
+	ttusbir->driver.add_to_buf = NULL;
+	ttusbir->driver.rbuf = &ttusbir->rbuf;
+	ttusbir->driver.set_use_inc = set_use_inc;
+	ttusbir->driver.set_use_dec = set_use_dec;
+	ttusbir->driver.dev = &intf->dev;
+	ttusbir->driver.owner = THIS_MODULE;
+	ttusbir->driver.features = LIRC_CAN_REC_MODE2;
+	ttusbir->minor = lirc_register_driver(&ttusbir->driver);
+	if (ttusbir->minor < 0) {
+		err("Error registering as LIRC driver\n");
+		usb_set_intfdata(intf, NULL);
+		lirc_buffer_free(&ttusbir->rbuf);
+		kfree(ttusbir);
+		return -EIO;
+	}
+
+	/* Allocate and setup the URB that we will use to talk to the device */
+	for (i = 0; i < num_urbs; i++) {
+		ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL);
+		if (!ttusbir->urb[i]) {
+			err("Could not allocate memory for the URB\n");
+			for (j = i - 1; j >= 0; j--)
+				kfree(ttusbir->urb[j]);
+			lirc_buffer_free(&ttusbir->rbuf);
+			lirc_unregister_driver(ttusbir->minor);
+			kfree(ttusbir);
+			usb_set_intfdata(intf, NULL);
+			return -ENOMEM;
+		}
+		ttusbir->urb[i]->dev = ttusbir->udev;
+		ttusbir->urb[i]->context = ttusbir;
+		ttusbir->urb[i]->pipe = usb_rcvisocpipe(ttusbir->udev,
+							ttusbir->endpoint);
+		ttusbir->urb[i]->interval = 1;
+		ttusbir->urb[i]->transfer_flags = URB_ISO_ASAP;
+		ttusbir->urb[i]->transfer_buffer = &ttusbir->buffer[i][0];
+		ttusbir->urb[i]->complete = urb_complete;
+		ttusbir->urb[i]->number_of_packets = 8;
+		ttusbir->urb[i]->transfer_buffer_length = 128;
+		for (j = 0; j < 8; j++) {
+			ttusbir->urb[i]->iso_frame_desc[j].offset = j*16;
+			ttusbir->urb[i]->iso_frame_desc[j].length = 16;
+		}
+	}
+	return 0;
+}
+
+/**
+ * Called when the driver is unloaded or the device is unplugged
+ */
+static void disconnect(struct usb_interface *intf)
+{
+	int i;
+	struct ttusbir_device *ttusbir;
+
+	DPRINTK("Module ttusbir disconnect\n");
+
+	ttusbir = (struct ttusbir_device *) usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+	lirc_unregister_driver(ttusbir->minor);
+	DPRINTK("unregistered\n");
+
+	for (i = 0; i < num_urbs; i++) {
+		usb_kill_urb(ttusbir->urb[i]);
+		usb_free_urb(ttusbir->urb[i]);
+	}
+	DPRINTK("URBs killed\n");
+	lirc_buffer_free(&ttusbir->rbuf);
+	kfree(ttusbir);
+}
+
+static int ttusbir_init_module(void)
+{
+	int result;
+
+	DPRINTK(KERN_DEBUG "Module ttusbir init\n");
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&usb_driver);
+	if (result)
+		err("usb_register failed. Error number %d", result);
+	return result;
+}
+
+static void ttusbir_exit_module(void)
+{
+	printk(KERN_DEBUG "Module ttusbir exit\n");
+	usb_deregister(&usb_driver);
+}
+
+module_init(ttusbir_init_module);
+module_exit(ttusbir_exit_module);
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
new file mode 100644
index 00000000000..100caab1045
--- /dev/null
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -0,0 +1,1387 @@
+/*
+ * i2c IR lirc driver for devices with zilog IR processors
+ *
+ * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ * modified for PixelView (BT878P+W/FM) by
+ *      Michal Kochanowicz <mkochano@pld.org.pl>
+ *      Christoph Bartelmus <lirc@bartelmus.de>
+ * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
+ *      Ulrich Mueller <ulrich.mueller42@web.de>
+ * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
+ *      Stefan Jahn <stefan@lkcc.org>
+ * modified for inclusion into kernel sources by
+ *      Jerome Brock <jbrock@users.sourceforge.net>
+ * modified for Leadtek Winfast PVR2000 by
+ *      Thomas Reitmayr (treitmayr@yahoo.com)
+ * modified for Hauppauge PVR-150 IR TX device by
+ *      Mark Weaver <mark@npsl.co.uk>
+ * changed name from lirc_pvr150 to lirc_zilog, works on more than pvr-150
+ *	Jarod Wilson <jarod@redhat.com>
+ *
+ * parts are cut&pasted from the lirc_i2c.c driver
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+
+#include <media/lirc_dev.h>
+#include <media/lirc.h>
+
+struct IR {
+	struct lirc_driver l;
+
+	/* Device info */
+	struct mutex ir_lock;
+	int open;
+
+	/* RX device */
+	struct i2c_client c_rx;
+	int have_rx;
+
+	/* RX device buffer & lock */
+	struct lirc_buffer buf;
+	struct mutex buf_lock;
+
+	/* RX polling thread data */
+	struct completion *t_notify;
+	struct completion *t_notify2;
+	int shutdown;
+	struct task_struct *task;
+
+	/* RX read data */
+	unsigned char b[3];
+
+	/* TX device */
+	struct i2c_client c_tx;
+	int need_boot;
+	int have_tx;
+};
+
+/* Minor -> data mapping */
+static struct IR *ir_devices[MAX_IRCTL_DEVICES];
+
+/* Block size for IR transmitter */
+#define TX_BLOCK_SIZE	99
+
+/* Hauppauge IR transmitter data */
+struct tx_data_struct {
+	/* Boot block */
+	unsigned char *boot_data;
+
+	/* Start of binary data block */
+	unsigned char *datap;
+
+	/* End of binary data block */
+	unsigned char *endp;
+
+	/* Number of installed codesets */
+	unsigned int num_code_sets;
+
+	/* Pointers to codesets */
+	unsigned char **code_sets;
+
+	/* Global fixed data template */
+	int fixed[TX_BLOCK_SIZE];
+};
+
+static struct tx_data_struct *tx_data;
+static struct mutex tx_data_lock;
+
+#define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \
+					## args)
+#define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
+
+#define ZILOG_HAUPPAUGE_IR_RX_NAME "Zilog/Hauppauge IR RX"
+#define ZILOG_HAUPPAUGE_IR_TX_NAME "Zilog/Hauppauge IR TX"
+
+/* module parameters */
+static int debug;	/* debug output */
+static int disable_rx;	/* disable RX device */
+static int disable_tx;	/* disable TX device */
+static int minor = -1;	/* minor number */
+
+#define dprintk(fmt, args...)						\
+	do {								\
+		if (debug)						\
+			printk(KERN_DEBUG KBUILD_MODNAME ": " fmt,	\
+				 ## args);				\
+	} while (0)
+
+static int add_to_buf(struct IR *ir)
+{
+	__u16 code;
+	unsigned char codes[2];
+	unsigned char keybuf[6];
+	int got_data = 0;
+	int ret;
+	int failures = 0;
+	unsigned char sendbuf[1] = { 0 };
+
+	if (lirc_buffer_full(&ir->buf)) {
+		dprintk("buffer overflow\n");
+		return -EOVERFLOW;
+	}
+
+	/*
+	 * service the device as long as it is returning
+	 * data and we have space
+	 */
+	do {
+		/*
+		 * Lock i2c bus for the duration.  RX/TX chips interfere so
+		 * this is worth it
+		 */
+		mutex_lock(&ir->ir_lock);
+
+		/*
+		 * Send random "poll command" (?)  Windows driver does this
+		 * and it is a good point to detect chip failure.
+		 */
+		ret = i2c_master_send(&ir->c_rx, sendbuf, 1);
+		if (ret != 1) {
+			zilog_error("i2c_master_send failed with %d\n",	ret);
+			if (failures >= 3) {
+				mutex_unlock(&ir->ir_lock);
+				zilog_error("unable to read from the IR chip "
+					    "after 3 resets, giving up\n");
+				return ret;
+			}
+
+			/* Looks like the chip crashed, reset it */
+			zilog_error("polling the IR receiver chip failed, "
+				    "trying reset\n");
+
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout((100 * HZ + 999) / 1000);
+			ir->need_boot = 1;
+
+			++failures;
+			mutex_unlock(&ir->ir_lock);
+			continue;
+		}
+
+		ret = i2c_master_recv(&ir->c_rx, keybuf, sizeof(keybuf));
+		mutex_unlock(&ir->ir_lock);
+		if (ret != sizeof(keybuf)) {
+			zilog_error("i2c_master_recv failed with %d -- "
+				    "keeping last read buffer\n", ret);
+		} else {
+			ir->b[0] = keybuf[3];
+			ir->b[1] = keybuf[4];
+			ir->b[2] = keybuf[5];
+			dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]);
+		}
+
+		/* key pressed ? */
+#ifdef I2C_HW_B_HDPVR
+		if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR) {
+			if (got_data && (keybuf[0] == 0x80))
+				return 0;
+			else if (got_data && (keybuf[0] == 0x00))
+				return -ENODATA;
+		} else if ((ir->b[0] & 0x80) == 0)
+#else
+		if ((ir->b[0] & 0x80) == 0)
+#endif
+			return got_data ? 0 : -ENODATA;
+
+		/* look what we have */
+		code = (((__u16)ir->b[0] & 0x7f) << 6) | (ir->b[1] >> 2);
+
+		codes[0] = (code >> 8) & 0xff;
+		codes[1] = code & 0xff;
+
+		/* return it */
+		lirc_buffer_write(&ir->buf, codes);
+		++got_data;
+	} while (!lirc_buffer_full(&ir->buf));
+
+	return 0;
+}
+
+/*
+ * Main function of the polling thread -- from lirc_dev.
+ * We don't fit the LIRC model at all anymore.  This is horrible, but
+ * basically we have a single RX/TX device with a nasty failure mode
+ * that needs to be accounted for across the pair.  lirc lets us provide
+ * fops, but prevents us from using the internal polling, etc. if we do
+ * so.  Hence the replication.  Might be neater to extend the LIRC model
+ * to account for this but I'd think it's a very special case of seriously
+ * messed up hardware.
+ */
+static int lirc_thread(void *arg)
+{
+	struct IR *ir = arg;
+
+	if (ir->t_notify != NULL)
+		complete(ir->t_notify);
+
+	dprintk("poll thread started\n");
+
+	do {
+		if (ir->open) {
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			/*
+			 * This is ~113*2 + 24 + jitter (2*repeat gap +
+			 * code length).  We use this interval as the chip
+			 * resets every time you poll it (bad!).  This is
+			 * therefore just sufficient to catch all of the
+			 * button presses.  It makes the remote much more
+			 * responsive.  You can see the difference by
+			 * running irw and holding down a button.  With
+			 * 100ms, the old polling interval, you'll notice
+			 * breaks in the repeat sequence corresponding to
+			 * lost keypresses.
+			 */
+			schedule_timeout((260 * HZ) / 1000);
+			if (ir->shutdown)
+				break;
+			if (!add_to_buf(ir))
+				wake_up_interruptible(&ir->buf.wait_poll);
+		} else {
+			/* if device not opened so we can sleep half a second */
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ/2);
+		}
+	} while (!ir->shutdown);
+
+	if (ir->t_notify2 != NULL)
+		wait_for_completion(ir->t_notify2);
+
+	ir->task = NULL;
+	if (ir->t_notify != NULL)
+		complete(ir->t_notify);
+
+	dprintk("poll thread ended\n");
+	return 0;
+}
+
+static int set_use_inc(void *data)
+{
+	struct IR *ir = data;
+
+	if (ir->l.owner == NULL || try_module_get(ir->l.owner) == 0)
+		return -ENODEV;
+
+	/* lock bttv in memory while /dev/lirc is in use  */
+	/*
+	 * this is completely broken code. lirc_unregister_driver()
+	 * must be possible even when the device is open
+	 */
+	if (ir->c_rx.addr)
+		i2c_use_client(&ir->c_rx);
+	if (ir->c_tx.addr)
+		i2c_use_client(&ir->c_tx);
+
+	return 0;
+}
+
+static void set_use_dec(void *data)
+{
+	struct IR *ir = data;
+
+	if (ir->c_rx.addr)
+		i2c_release_client(&ir->c_rx);
+	if (ir->c_tx.addr)
+		i2c_release_client(&ir->c_tx);
+	if (ir->l.owner != NULL)
+		module_put(ir->l.owner);
+}
+
+/* safe read of a uint32 (always network byte order) */
+static int read_uint32(unsigned char **data,
+				     unsigned char *endp, unsigned int *val)
+{
+	if (*data + 4 > endp)
+		return 0;
+	*val = ((*data)[0] << 24) | ((*data)[1] << 16) |
+	       ((*data)[2] << 8) | (*data)[3];
+	*data += 4;
+	return 1;
+}
+
+/* safe read of a uint8 */
+static int read_uint8(unsigned char **data,
+				    unsigned char *endp, unsigned char *val)
+{
+	if (*data + 1 > endp)
+		return 0;
+	*val = *((*data)++);
+	return 1;
+}
+
+/* safe skipping of N bytes */
+static int skip(unsigned char **data,
+			      unsigned char *endp, unsigned int distance)
+{
+	if (*data + distance > endp)
+		return 0;
+	*data += distance;
+	return 1;
+}
+
+/* decompress key data into the given buffer */
+static int get_key_data(unsigned char *buf,
+			     unsigned int codeset, unsigned int key)
+{
+	unsigned char *data, *endp, *diffs, *key_block;
+	unsigned char keys, ndiffs, id;
+	unsigned int base, lim, pos, i;
+
+	/* Binary search for the codeset */
+	for (base = 0, lim = tx_data->num_code_sets; lim; lim >>= 1) {
+		pos = base + (lim >> 1);
+		data = tx_data->code_sets[pos];
+
+		if (!read_uint32(&data, tx_data->endp, &i))
+			goto corrupt;
+
+		if (i == codeset)
+			break;
+		else if (codeset > i) {
+			base = pos + 1;
+			--lim;
+		}
+	}
+	/* Not found? */
+	if (!lim)
+		return -EPROTO;
+
+	/* Set end of data block */
+	endp = pos < tx_data->num_code_sets - 1 ?
+		tx_data->code_sets[pos + 1] : tx_data->endp;
+
+	/* Read the block header */
+	if (!read_uint8(&data, endp, &keys) ||
+	    !read_uint8(&data, endp, &ndiffs) ||
+	    ndiffs > TX_BLOCK_SIZE || keys == 0)
+		goto corrupt;
+
+	/* Save diffs & skip */
+	diffs = data;
+	if (!skip(&data, endp, ndiffs))
+		goto corrupt;
+
+	/* Read the id of the first key */
+	if (!read_uint8(&data, endp, &id))
+		goto corrupt;
+
+	/* Unpack the first key's data */
+	for (i = 0; i < TX_BLOCK_SIZE; ++i) {
+		if (tx_data->fixed[i] == -1) {
+			if (!read_uint8(&data, endp, &buf[i]))
+				goto corrupt;
+		} else {
+			buf[i] = (unsigned char)tx_data->fixed[i];
+		}
+	}
+
+	/* Early out key found/not found */
+	if (key == id)
+		return 0;
+	if (keys == 1)
+		return -EPROTO;
+
+	/* Sanity check */
+	key_block = data;
+	if (!skip(&data, endp, (keys - 1) * (ndiffs + 1)))
+		goto corrupt;
+
+	/* Binary search for the key */
+	for (base = 0, lim = keys - 1; lim; lim >>= 1) {
+		/* Seek to block */
+		unsigned char *key_data;
+		pos = base + (lim >> 1);
+		key_data = key_block + (ndiffs + 1) * pos;
+
+		if (*key_data == key) {
+			/* skip key id */
+			++key_data;
+
+			/* found, so unpack the diffs */
+			for (i = 0; i < ndiffs; ++i) {
+				unsigned char val;
+				if (!read_uint8(&key_data, endp, &val) ||
+				    diffs[i] >= TX_BLOCK_SIZE)
+					goto corrupt;
+				buf[diffs[i]] = val;
+			}
+
+			return 0;
+		} else if (key > *key_data) {
+			base = pos + 1;
+			--lim;
+		}
+	}
+	/* Key not found */
+	return -EPROTO;
+
+corrupt:
+	zilog_error("firmware is corrupt\n");
+	return -EFAULT;
+}
+
+/* send a block of data to the IR TX device */
+static int send_data_block(struct IR *ir, unsigned char *data_block)
+{
+	int i, j, ret;
+	unsigned char buf[5];
+
+	for (i = 0; i < TX_BLOCK_SIZE;) {
+		int tosend = TX_BLOCK_SIZE - i;
+		if (tosend > 4)
+			tosend = 4;
+		buf[0] = (unsigned char)(i + 1);
+		for (j = 0; j < tosend; ++j)
+			buf[1 + j] = data_block[i + j];
+		dprintk("%02x %02x %02x %02x %02x",
+			buf[0], buf[1], buf[2], buf[3], buf[4]);
+		ret = i2c_master_send(&ir->c_tx, buf, tosend + 1);
+		if (ret != tosend + 1) {
+			zilog_error("i2c_master_send failed with %d\n", ret);
+			return ret < 0 ? ret : -EFAULT;
+		}
+		i += tosend;
+	}
+	return 0;
+}
+
+/* send boot data to the IR TX device */
+static int send_boot_data(struct IR *ir)
+{
+	int ret;
+	unsigned char buf[4];
+
+	/* send the boot block */
+	ret = send_data_block(ir, tx_data->boot_data);
+	if (ret != 0)
+		return ret;
+
+	/* kick it off? */
+	buf[0] = 0x00;
+	buf[1] = 0x20;
+	ret = i2c_master_send(&ir->c_tx, buf, 2);
+	if (ret != 2) {
+		zilog_error("i2c_master_send failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+	ret = i2c_master_send(&ir->c_tx, buf, 1);
+	if (ret != 1) {
+		zilog_error("i2c_master_send failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+
+	/* Here comes the firmware version... (hopefully) */
+	ret = i2c_master_recv(&ir->c_tx, buf, 4);
+	if (ret != 4) {
+		zilog_error("i2c_master_recv failed with %d\n", ret);
+		return 0;
+	}
+	if (buf[0] != 0x80) {
+		zilog_error("unexpected IR TX response: %02x\n", buf[0]);
+		return 0;
+	}
+	zilog_notify("Zilog/Hauppauge IR blaster firmware version "
+		     "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]);
+
+	return 0;
+}
+
+/* unload "firmware", lock held */
+static void fw_unload_locked(void)
+{
+	if (tx_data) {
+		if (tx_data->code_sets)
+			vfree(tx_data->code_sets);
+
+		if (tx_data->datap)
+			vfree(tx_data->datap);
+
+		vfree(tx_data);
+		tx_data = NULL;
+		dprintk("successfully unloaded IR blaster firmware\n");
+	}
+}
+
+/* unload "firmware" for the IR TX device */
+static void fw_unload(void)
+{
+	mutex_lock(&tx_data_lock);
+	fw_unload_locked();
+	mutex_unlock(&tx_data_lock);
+}
+
+/* load "firmware" for the IR TX device */
+static int fw_load(struct IR *ir)
+{
+	int ret;
+	unsigned int i;
+	unsigned char *data, version, num_global_fixed;
+	const struct firmware *fw_entry;
+
+	/* Already loaded? */
+	mutex_lock(&tx_data_lock);
+	if (tx_data) {
+		ret = 0;
+		goto out;
+	}
+
+	/* Request codeset data file */
+	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &ir->c_tx.dev);
+	if (ret != 0) {
+		zilog_error("firmware haup-ir-blaster.bin not available "
+			    "(%d)\n", ret);
+		ret = ret < 0 ? ret : -EFAULT;
+		goto out;
+	}
+	dprintk("firmware of size %zu loaded\n", fw_entry->size);
+
+	/* Parse the file */
+	tx_data = vmalloc(sizeof(*tx_data));
+	if (tx_data == NULL) {
+		zilog_error("out of memory\n");
+		release_firmware(fw_entry);
+		ret = -ENOMEM;
+		goto out;
+	}
+	tx_data->code_sets = NULL;
+
+	/* Copy the data so hotplug doesn't get confused and timeout */
+	tx_data->datap = vmalloc(fw_entry->size);
+	if (tx_data->datap == NULL) {
+		zilog_error("out of memory\n");
+		release_firmware(fw_entry);
+		vfree(tx_data);
+		ret = -ENOMEM;
+		goto out;
+	}
+	memcpy(tx_data->datap, fw_entry->data, fw_entry->size);
+	tx_data->endp = tx_data->datap + fw_entry->size;
+	release_firmware(fw_entry); fw_entry = NULL;
+
+	/* Check version */
+	data = tx_data->datap;
+	if (!read_uint8(&data, tx_data->endp, &version))
+		goto corrupt;
+	if (version != 1) {
+		zilog_error("unsupported code set file version (%u, expected"
+			    "1) -- please upgrade to a newer driver",
+			    version);
+		fw_unload_locked();
+		ret = -EFAULT;
+		goto out;
+	}
+
+	/* Save boot block for later */
+	tx_data->boot_data = data;
+	if (!skip(&data, tx_data->endp, TX_BLOCK_SIZE))
+		goto corrupt;
+
+	if (!read_uint32(&data, tx_data->endp,
+			      &tx_data->num_code_sets))
+		goto corrupt;
+
+	dprintk("%u IR blaster codesets loaded\n", tx_data->num_code_sets);
+
+	tx_data->code_sets = vmalloc(
+		tx_data->num_code_sets * sizeof(char *));
+	if (tx_data->code_sets == NULL) {
+		fw_unload_locked();
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < TX_BLOCK_SIZE; ++i)
+		tx_data->fixed[i] = -1;
+
+	/* Read global fixed data template */
+	if (!read_uint8(&data, tx_data->endp, &num_global_fixed) ||
+	    num_global_fixed > TX_BLOCK_SIZE)
+		goto corrupt;
+	for (i = 0; i < num_global_fixed; ++i) {
+		unsigned char pos, val;
+		if (!read_uint8(&data, tx_data->endp, &pos) ||
+		    !read_uint8(&data, tx_data->endp, &val) ||
+		    pos >= TX_BLOCK_SIZE)
+			goto corrupt;
+		tx_data->fixed[pos] = (int)val;
+	}
+
+	/* Filch out the position of each code set */
+	for (i = 0; i < tx_data->num_code_sets; ++i) {
+		unsigned int id;
+		unsigned char keys;
+		unsigned char ndiffs;
+
+		/* Save the codeset position */
+		tx_data->code_sets[i] = data;
+
+		/* Read header */
+		if (!read_uint32(&data, tx_data->endp, &id) ||
+		    !read_uint8(&data, tx_data->endp, &keys) ||
+		    !read_uint8(&data, tx_data->endp, &ndiffs) ||
+		    ndiffs > TX_BLOCK_SIZE || keys == 0)
+			goto corrupt;
+
+		/* skip diff positions */
+		if (!skip(&data, tx_data->endp, ndiffs))
+			goto corrupt;
+
+		/*
+		 * After the diffs we have the first key id + data -
+		 * global fixed
+		 */
+		if (!skip(&data, tx_data->endp,
+			       1 + TX_BLOCK_SIZE - num_global_fixed))
+			goto corrupt;
+
+		/* Then we have keys-1 blocks of key id+diffs */
+		if (!skip(&data, tx_data->endp,
+			       (ndiffs + 1) * (keys - 1)))
+			goto corrupt;
+	}
+	ret = 0;
+	goto out;
+
+corrupt:
+	zilog_error("firmware is corrupt\n");
+	fw_unload_locked();
+	ret = -EFAULT;
+
+out:
+	mutex_unlock(&tx_data_lock);
+	return ret;
+}
+
+/* initialise the IR TX device */
+static int tx_init(struct IR *ir)
+{
+	int ret;
+
+	/* Load 'firmware' */
+	ret = fw_load(ir);
+	if (ret != 0)
+		return ret;
+
+	/* Send boot block */
+	ret = send_boot_data(ir);
+	if (ret != 0)
+		return ret;
+	ir->need_boot = 0;
+
+	/* Looks good */
+	return 0;
+}
+
+/* do nothing stub to make LIRC happy */
+static loff_t lseek(struct file *filep, loff_t offset, int orig)
+{
+	return -ESPIPE;
+}
+
+/* copied from lirc_dev */
+static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos)
+{
+	struct IR *ir = (struct IR *)filep->private_data;
+	unsigned char buf[ir->buf.chunk_size];
+	int ret = 0, written = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	dprintk("read called\n");
+	if (ir->c_rx.addr == 0)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&ir->buf_lock))
+		return -ERESTARTSYS;
+
+	if (n % ir->buf.chunk_size) {
+		dprintk("read result = -EINVAL\n");
+		mutex_unlock(&ir->buf_lock);
+		return -EINVAL;
+	}
+
+	/*
+	 * we add ourselves to the task queue before buffer check
+	 * to avoid losing scan code (in case when queue is awaken somewhere
+	 * between while condition checking and scheduling)
+	 */
+	add_wait_queue(&ir->buf.wait_poll, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	/*
+	 * while we didn't provide 'length' bytes, device is opened in blocking
+	 * mode and 'copy_to_user' is happy, wait for data.
+	 */
+	while (written < n && ret == 0) {
+		if (lirc_buffer_empty(&ir->buf)) {
+			/*
+			 * According to the read(2) man page, 'written' can be
+			 * returned as less than 'n', instead of blocking
+			 * again, returning -EWOULDBLOCK, or returning
+			 * -ERESTARTSYS
+			 */
+			if (written)
+				break;
+			if (filep->f_flags & O_NONBLOCK) {
+				ret = -EWOULDBLOCK;
+				break;
+			}
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+		} else {
+			lirc_buffer_read(&ir->buf, buf);
+			ret = copy_to_user((void *)outbuf+written, buf,
+					   ir->buf.chunk_size);
+			written += ir->buf.chunk_size;
+		}
+	}
+
+	remove_wait_queue(&ir->buf.wait_poll, &wait);
+	set_current_state(TASK_RUNNING);
+	mutex_unlock(&ir->buf_lock);
+
+	dprintk("read result = %s (%d)\n",
+		ret ? "-EFAULT" : "OK", ret);
+
+	return ret ? ret : written;
+}
+
+/* send a keypress to the IR TX device */
+static int send_code(struct IR *ir, unsigned int code, unsigned int key)
+{
+	unsigned char data_block[TX_BLOCK_SIZE];
+	unsigned char buf[2];
+	int i, ret;
+
+	/* Get data for the codeset/key */
+	ret = get_key_data(data_block, code, key);
+
+	if (ret == -EPROTO) {
+		zilog_error("failed to get data for code %u, key %u -- check "
+			    "lircd.conf entries\n", code, key);
+		return ret;
+	} else if (ret != 0)
+		return ret;
+
+	/* Send the data block */
+	ret = send_data_block(ir, data_block);
+	if (ret != 0)
+		return ret;
+
+	/* Send data block length? */
+	buf[0] = 0x00;
+	buf[1] = 0x40;
+	ret = i2c_master_send(&ir->c_tx, buf, 2);
+	if (ret != 2) {
+		zilog_error("i2c_master_send failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+	ret = i2c_master_send(&ir->c_tx, buf, 1);
+	if (ret != 1) {
+		zilog_error("i2c_master_send failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+
+	/* Send finished download? */
+	ret = i2c_master_recv(&ir->c_tx, buf, 1);
+	if (ret != 1) {
+		zilog_error("i2c_master_recv failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+	if (buf[0] != 0xA0) {
+		zilog_error("unexpected IR TX response #1: %02x\n",
+			buf[0]);
+		return -EFAULT;
+	}
+
+	/* Send prepare command? */
+	buf[0] = 0x00;
+	buf[1] = 0x80;
+	ret = i2c_master_send(&ir->c_tx, buf, 2);
+	if (ret != 2) {
+		zilog_error("i2c_master_send failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+
+#ifdef I2C_HW_B_HDPVR
+	/*
+	 * The sleep bits aren't necessary on the HD PVR, and in fact, the
+	 * last i2c_master_recv always fails with a -5, so for now, we're
+	 * going to skip this whole mess and say we're done on the HD PVR
+	 */
+	if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR)
+		goto done;
+#endif
+
+	/*
+	 * This bit NAKs until the device is ready, so we retry it
+	 * sleeping a bit each time.  This seems to be what the windows
+	 * driver does, approximately.
+	 * Try for up to 1s.
+	 */
+	for (i = 0; i < 20; ++i) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout((50 * HZ + 999) / 1000);
+		ret = i2c_master_send(&ir->c_tx, buf, 1);
+		if (ret == 1)
+			break;
+		dprintk("NAK expected: i2c_master_send "
+			"failed with %d (try %d)\n", ret, i+1);
+	}
+	if (ret != 1) {
+		zilog_error("IR TX chip never got ready: last i2c_master_send "
+			    "failed with %d\n", ret);
+		return ret < 0 ? ret : -EFAULT;
+	}
+
+	/* Seems to be an 'ok' response */
+	i = i2c_master_recv(&ir->c_tx, buf, 1);
+	if (i != 1) {
+		zilog_error("i2c_master_recv failed with %d\n", ret);
+		return -EFAULT;
+	}
+	if (buf[0] != 0x80) {
+		zilog_error("unexpected IR TX response #2: %02x\n", buf[0]);
+		return -EFAULT;
+	}
+
+done:
+	/* Oh good, it worked */
+	dprintk("sent code %u, key %u\n", code, key);
+	return 0;
+}
+
+/*
+ * Write a code to the device.  We take in a 32-bit number (an int) and then
+ * decode this to a codeset/key index.  The key data is then decompressed and
+ * sent to the device.  We have a spin lock as per i2c documentation to prevent
+ * multiple concurrent sends which would probably cause the device to explode.
+ */
+static ssize_t write(struct file *filep, const char *buf, size_t n,
+			  loff_t *ppos)
+{
+	struct IR *ir = (struct IR *)filep->private_data;
+	size_t i;
+	int failures = 0;
+
+	if (ir->c_tx.addr == 0)
+		return -ENODEV;
+
+	/* Validate user parameters */
+	if (n % sizeof(int))
+		return -EINVAL;
+
+	/* Lock i2c bus for the duration */
+	mutex_lock(&ir->ir_lock);
+
+	/* Send each keypress */
+	for (i = 0; i < n;) {
+		int ret = 0;
+		int command;
+
+		if (copy_from_user(&command, buf + i, sizeof(command))) {
+			mutex_unlock(&ir->ir_lock);
+			return -EFAULT;
+		}
+
+		/* Send boot data first if required */
+		if (ir->need_boot == 1) {
+			ret = send_boot_data(ir);
+			if (ret == 0)
+				ir->need_boot = 0;
+		}
+
+		/* Send the code */
+		if (ret == 0) {
+			ret = send_code(ir, (unsigned)command >> 16,
+					    (unsigned)command & 0xFFFF);
+			if (ret == -EPROTO) {
+				mutex_unlock(&ir->ir_lock);
+				return ret;
+			}
+		}
+
+		/*
+		 * Hmm, a failure.  If we've had a few then give up, otherwise
+		 * try a reset
+		 */
+		if (ret != 0) {
+			/* Looks like the chip crashed, reset it */
+			zilog_error("sending to the IR transmitter chip "
+				    "failed, trying reset\n");
+
+			if (failures >= 3) {
+				zilog_error("unable to send to the IR chip "
+					    "after 3 resets, giving up\n");
+				mutex_unlock(&ir->ir_lock);
+				return ret;
+			}
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout((100 * HZ + 999) / 1000);
+			ir->need_boot = 1;
+			++failures;
+		} else
+			i += sizeof(int);
+	}
+
+	/* Release i2c bus */
+	mutex_unlock(&ir->ir_lock);
+
+	/* All looks good */
+	return n;
+}
+
+/* copied from lirc_dev */
+static unsigned int poll(struct file *filep, poll_table *wait)
+{
+	struct IR *ir = (struct IR *)filep->private_data;
+	unsigned int ret;
+
+	dprintk("poll called\n");
+	if (ir->c_rx.addr == 0)
+		return -ENODEV;
+
+	mutex_lock(&ir->buf_lock);
+
+	poll_wait(filep, &ir->buf.wait_poll, wait);
+
+	dprintk("poll result = %s\n",
+		lirc_buffer_empty(&ir->buf) ? "0" : "POLLIN|POLLRDNORM");
+
+	ret = lirc_buffer_empty(&ir->buf) ? 0 : (POLLIN|POLLRDNORM);
+
+	mutex_unlock(&ir->buf_lock);
+	return ret;
+}
+
+static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	struct IR *ir = (struct IR *)filep->private_data;
+	int result;
+	unsigned long mode, features = 0;
+
+	if (ir->c_rx.addr != 0)
+		features |= LIRC_CAN_REC_LIRCCODE;
+	if (ir->c_tx.addr != 0)
+		features |= LIRC_CAN_SEND_PULSE;
+
+	switch (cmd) {
+	case LIRC_GET_LENGTH:
+		result = put_user((unsigned long)13,
+				  (unsigned long *)arg);
+		break;
+	case LIRC_GET_FEATURES:
+		result = put_user(features, (unsigned long *) arg);
+		break;
+	case LIRC_GET_REC_MODE:
+		if (!(features&LIRC_CAN_REC_MASK))
+			return -ENOSYS;
+
+		result = put_user(LIRC_REC2MODE
+				  (features&LIRC_CAN_REC_MASK),
+				  (unsigned long *)arg);
+		break;
+	case LIRC_SET_REC_MODE:
+		if (!(features&LIRC_CAN_REC_MASK))
+			return -ENOSYS;
+
+		result = get_user(mode, (unsigned long *)arg);
+		if (!result && !(LIRC_MODE2REC(mode) & features))
+			result = -EINVAL;
+		break;
+	case LIRC_GET_SEND_MODE:
+		if (!(features&LIRC_CAN_SEND_MASK))
+			return -ENOSYS;
+
+		result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg);
+		break;
+	case LIRC_SET_SEND_MODE:
+		if (!(features&LIRC_CAN_SEND_MASK))
+			return -ENOSYS;
+
+		result = get_user(mode, (unsigned long *) arg);
+		if (!result && mode != LIRC_MODE_PULSE)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return result;
+}
+
+/*
+ * Open the IR device.  Get hold of our IR structure and
+ * stash it in private_data for the file
+ */
+static int open(struct inode *node, struct file *filep)
+{
+	struct IR *ir;
+	int ret;
+
+	/* find our IR struct */
+	unsigned minor = MINOR(node->i_rdev);
+	if (minor >= MAX_IRCTL_DEVICES) {
+		dprintk("minor %d: open result = -ENODEV\n",
+			minor);
+		return -ENODEV;
+	}
+	ir = ir_devices[minor];
+
+	/* increment in use count */
+	mutex_lock(&ir->ir_lock);
+	++ir->open;
+	ret = set_use_inc(ir);
+	if (ret != 0) {
+		--ir->open;
+		mutex_unlock(&ir->ir_lock);
+		return ret;
+	}
+	mutex_unlock(&ir->ir_lock);
+
+	/* stash our IR struct */
+	filep->private_data = ir;
+
+	return 0;
+}
+
+/* Close the IR device */
+static int close(struct inode *node, struct file *filep)
+{
+	/* find our IR struct */
+	struct IR *ir = (struct IR *)filep->private_data;
+	if (ir == NULL) {
+		zilog_error("close: no private_data attached to the file!\n");
+		return -ENODEV;
+	}
+
+	/* decrement in use count */
+	mutex_lock(&ir->ir_lock);
+	--ir->open;
+	set_use_dec(ir);
+	mutex_unlock(&ir->ir_lock);
+
+	return 0;
+}
+
+static struct lirc_driver lirc_template = {
+	.name		= "lirc_zilog",
+	.set_use_inc	= set_use_inc,
+	.set_use_dec	= set_use_dec,
+	.owner		= THIS_MODULE
+};
+
+static int ir_remove(struct i2c_client *client);
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
+
+static const struct i2c_device_id ir_transceiver_id[] = {
+	/* Generic entry for any IR transceiver */
+	{ "ir_video", 0 },
+	/* IR device specific entries should be added here */
+	{ "ir_tx_z8f0811_haup", 0 },
+	{ "ir_rx_z8f0811_haup", 0 },
+	{ }
+};
+
+static struct i2c_driver driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "Zilog/Hauppauge i2c IR",
+	},
+	.probe		= ir_probe,
+	.remove		= ir_remove,
+	.command	= ir_command,
+	.id_table	= ir_transceiver_id,
+};
+
+static const struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= lseek,
+	.read		= read,
+	.write		= write,
+	.poll		= poll,
+	.unlocked_ioctl	= ioctl,
+	.open		= open,
+	.release	= close
+};
+
+static int ir_remove(struct i2c_client *client)
+{
+	struct IR *ir = i2c_get_clientdata(client);
+
+	mutex_lock(&ir->ir_lock);
+
+	if (ir->have_rx || ir->have_tx) {
+		DECLARE_COMPLETION(tn);
+		DECLARE_COMPLETION(tn2);
+
+		/* end up polling thread */
+		if (ir->task && !IS_ERR(ir->task)) {
+			ir->t_notify = &tn;
+			ir->t_notify2 = &tn2;
+			ir->shutdown = 1;
+			wake_up_process(ir->task);
+			complete(&tn2);
+			wait_for_completion(&tn);
+			ir->t_notify = NULL;
+			ir->t_notify2 = NULL;
+		}
+
+	} else {
+		mutex_unlock(&ir->ir_lock);
+		zilog_error("%s: detached from something we didn't "
+			    "attach to\n", __func__);
+		return -ENODEV;
+	}
+
+	/* unregister lirc driver */
+	if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) {
+		lirc_unregister_driver(ir->l.minor);
+		ir_devices[ir->l.minor] = NULL;
+	}
+
+	/* free memory */
+	lirc_buffer_free(&ir->buf);
+	mutex_unlock(&ir->ir_lock);
+	kfree(ir);
+
+	return 0;
+}
+
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct IR *ir = NULL;
+	struct i2c_adapter *adap = client->adapter;
+	char buf;
+	int ret;
+	int have_rx = 0, have_tx = 0;
+
+	dprintk("%s: adapter id=0x%x, client addr=0x%02x\n",
+		__func__, adap->id, client->addr);
+
+	/*
+	 * The external IR receiver is at i2c address 0x71.
+	 * The IR transmitter is at 0x70.
+	 */
+	client->addr = 0x70;
+
+	if (!disable_tx) {
+		if (i2c_master_recv(client, &buf, 1) == 1)
+			have_tx = 1;
+		dprintk("probe 0x70 @ %s: %s\n",
+			adap->name, have_tx ? "success" : "failed");
+	}
+
+	if (!disable_rx) {
+		client->addr = 0x71;
+		if (i2c_master_recv(client, &buf, 1) == 1)
+			have_rx = 1;
+		dprintk("probe 0x71 @ %s: %s\n",
+			adap->name, have_rx ? "success" : "failed");
+	}
+
+	if (!(have_rx || have_tx)) {
+		zilog_error("%s: no devices found\n", adap->name);
+		goto out_nodev;
+	}
+
+	printk(KERN_INFO "lirc_zilog: chip found with %s\n",
+		have_rx && have_tx ? "RX and TX" :
+			have_rx ? "RX only" : "TX only");
+
+	ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+
+	if (!ir)
+		goto out_nomem;
+
+	ret = lirc_buffer_init(&ir->buf, 2, BUFLEN / 2);
+	if (ret)
+		goto out_nomem;
+
+	mutex_init(&ir->ir_lock);
+	mutex_init(&ir->buf_lock);
+	ir->need_boot = 1;
+
+	memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
+	ir->l.minor = -1;
+
+	/* I2C attach to device */
+	i2c_set_clientdata(client, ir);
+
+	/* initialise RX device */
+	if (have_rx) {
+		DECLARE_COMPLETION(tn);
+		memcpy(&ir->c_rx, client, sizeof(struct i2c_client));
+
+		ir->c_rx.addr = 0x71;
+		strlcpy(ir->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME,
+			I2C_NAME_SIZE);
+
+		/* try to fire up polling thread */
+		ir->t_notify = &tn;
+		ir->task = kthread_run(lirc_thread, ir, "lirc_zilog");
+		if (IS_ERR(ir->task)) {
+			ret = PTR_ERR(ir->task);
+			zilog_error("lirc_register_driver: cannot run "
+				    "poll thread %d\n", ret);
+			goto err;
+		}
+		wait_for_completion(&tn);
+		ir->t_notify = NULL;
+		ir->have_rx = 1;
+	}
+
+	/* initialise TX device */
+	if (have_tx) {
+		memcpy(&ir->c_tx, client, sizeof(struct i2c_client));
+		ir->c_tx.addr = 0x70;
+		strlcpy(ir->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME,
+			I2C_NAME_SIZE);
+		ir->have_tx = 1;
+	}
+
+	/* set lirc_dev stuff */
+	ir->l.code_length = 13;
+	ir->l.rbuf	  = &ir->buf;
+	ir->l.fops	  = &lirc_fops;
+	ir->l.data	  = ir;
+	ir->l.minor       = minor;
+	ir->l.dev         = &adap->dev;
+	ir->l.sample_rate = 0;
+
+	/* register with lirc */
+	ir->l.minor = lirc_register_driver(&ir->l);
+	if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) {
+		zilog_error("ir_attach: \"minor\" must be between 0 and %d "
+			    "(%d)!\n", MAX_IRCTL_DEVICES-1, ir->l.minor);
+		ret = -EBADRQC;
+		goto err;
+	}
+
+	/* store this for getting back in open() later on */
+	ir_devices[ir->l.minor] = ir;
+
+	/*
+	 * if we have the tx device, load the 'firmware'.  We do this
+	 * after registering with lirc as otherwise hotplug seems to take
+	 * 10s to create the lirc device.
+	 */
+	if (have_tx) {
+		/* Special TX init */
+		ret = tx_init(ir);
+		if (ret != 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	/* undo everything, hopefully... */
+	if (ir->c_rx.addr)
+		ir_remove(&ir->c_rx);
+	if (ir->c_tx.addr)
+		ir_remove(&ir->c_tx);
+	return ret;
+
+out_nodev:
+	zilog_error("no device found\n");
+	return -ENODEV;
+
+out_nomem:
+	zilog_error("memory allocation failure\n");
+	kfree(ir);
+	return -ENOMEM;
+}
+
+static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	/* nothing */
+	return 0;
+}
+
+static int __init zilog_init(void)
+{
+	int ret;
+
+	zilog_notify("Zilog/Hauppauge IR driver initializing\n");
+
+	mutex_init(&tx_data_lock);
+
+	request_module("firmware_class");
+
+	ret = i2c_add_driver(&driver);
+	if (ret)
+		zilog_error("initialization failed\n");
+	else
+		zilog_notify("initialization complete\n");
+
+	return ret;
+}
+
+static void __exit zilog_exit(void)
+{
+	i2c_del_driver(&driver);
+	/* if loaded */
+	fw_unload();
+	zilog_notify("Zilog/Hauppauge IR driver unloaded\n");
+}
+
+module_init(zilog_init);
+module_exit(zilog_exit);
+
+MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)");
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
+	      "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver");
+MODULE_LICENSE("GPL");
+/* for compat with old name, which isn't all that accurate anymore */
+MODULE_ALIAS("lirc_pvr150");
+
+module_param(minor, int, 0444);
+MODULE_PARM_DESC(minor, "Preferred minor device number");
+
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
+
+module_param(disable_rx, bool, 0644);
+MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device");
+
+module_param(disable_tx, bool, 0644);
+MODULE_PARM_DESC(disable_tx, "Disable the IR transmitter device");
diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c
index efa7fd62d39..41876f2b0e5 100644
--- a/drivers/staging/memrar/memrar_handler.c
+++ b/drivers/staging/memrar/memrar_handler.c
@@ -47,8 +47,7 @@
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-
-#include "../rar_register/rar_register.h"
+#include <linux/rar_register.h>
 
 #include "memrar.h"
 #include "memrar_allocator.h"
diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig
new file mode 100644
index 00000000000..c2af4921708
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Kconfig
@@ -0,0 +1,7 @@
+config TOUCHSCREEN_INTEL_MID
+	tristate "Intel MID platform resistive touchscreen"
+	depends on INTEL_SCU_IPC
+	default y
+	help
+	  Say Y here if you have a Intel MID based touchscreen
+	  If unsure, say N.
diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile
new file mode 100644
index 00000000000..2d638b0d70b
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel_mid_touch.o
+
+
diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO
new file mode 100644
index 00000000000..7157028d634
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/TODO
@@ -0,0 +1,2 @@
+- Move the driver to not think it is SPI (requires fixing some of the SFI
+  and firmware side)
diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
new file mode 100644
index 00000000000..abba22f921b
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
@@ -0,0 +1,864 @@
+/*
+ * intel_mid_touch.c - Intel MID Resistive Touch Screen Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; ifnot, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
+ * 			    Ramesh Agarwal (ramesh.agarwal@intel.com)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO:
+ *	kill off mrstouch_debug eventually
+ *	review conversion of r/m/w sequences
+ *	Replace interrupt mutex abuse
+ *	Kill of mrstouchdevp pointer
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/intel_scu_ipc.h>
+
+
+#if defined(MRSTOUCH_DEBUG)
+#define mrstouch_debug(fmt, args...)\
+	do { \
+		printk(KERN_DEBUG "\n[MRSTOUCH(%d)] - ", __LINE__); \
+		printk(KERN_DEBUG fmt, ##args); \
+	} while (0);
+#else
+#define mrstouch_debug(fmt, args...)
+#endif
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_ID1   0x00 /*PMIC ID1 register */
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_INT   0x04 /*PMIC interrupt register */
+#define PMIC_REG_MINT  0x05 /*PMIC interrupt mask register */
+
+/* ADC Interrupt registers */
+#define PMIC_REG_ADCINT   0x5F /*ADC interrupt register */
+#define PMIC_REG_MADCINT  0x60 /*ADC interrupt mask register */
+
+/* ADC Control registers */
+#define PMIC_REG_ADCCNTL1    0x61 /*ADC control register */
+
+/* ADC Channel Selection registers */
+#define PMICADDR0     0xA4
+#define END_OF_CHANNEL 0x1F
+
+/* ADC Result register */
+#define PMIC_REG_ADCSNS0H   0x64
+
+/* ADC channels for touch screen */
+#define MRST_TS_CHAN10   0xA /* Touch screen X+ connection */
+#define MRST_TS_CHAN11   0xB /* Touch screen X- connection */
+#define MRST_TS_CHAN12   0xC /* Touch screen Y+ connection */
+#define MRST_TS_CHAN13   0xD /* Touch screen Y- connection */
+
+/* Touch screen coordinate constants */
+#define TOUCH_PRESSURE   	50
+#define TOUCH_PRESSURE_FS	100
+
+#define XMOVE_LIMIT	5
+#define YMOVE_LIMIT	5
+#define XYMOVE_CNT	3
+
+#define MAX_10BIT	((1<<10)-1)
+
+/* Touch screen channel BIAS constants */
+#define XBIAS		0x20
+#define YBIAS		0x40
+#define ZBIAS		0x80
+
+/* Touch screen coordinates */
+#define MIN_X		10
+#define MAX_X		1024
+#define MIN_Y		10
+#define MAX_Y		1024
+#define WAIT_ADC_COMPLETION 10
+
+/* PMIC ADC round robin delays */
+#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */
+#define ADC_LOOP_DELAY1 0x1 /* 4.5  ms approximate */
+
+/* PMIC Vendor Identifiers */
+#define PMIC_VENDOR_FS  0 /* PMIC vendor FreeScale */
+#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */
+#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */
+#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */
+
+/* Touch screen device structure */
+struct mrstouch_dev {
+	struct spi_device *spi; /* SPI device associated with touch screen */
+	struct input_dev *input; /* input device for touchscreen*/
+	char 		phys[32]; /* Device name */
+	struct task_struct *pendet_thrd; /* PENDET interrupt handler */
+	struct mutex lock; /* Sync between interrupt and PENDET handler */
+	bool            busy; /* Busy flag */
+	u16             asr; /* Address selection register */
+	int             irq;    /* Touch screen IRQ # */
+	uint		vendor;  /* PMIC vendor */
+	uint		rev;  /* PMIC revision */
+	bool		suspended; /* Device suspended status */
+	bool		disabled;  /* Device disabled status */
+	u16		x;  /* X coordinate */
+	u16		y;  /* Y coordinate */
+	bool		pendown;  /* PEN position */
+} ;
+
+
+/* Global Pointer to Touch screen device */
+static struct mrstouch_dev *mrstouchdevp;
+
+/* Utility to read PMIC ID */
+static int mrstouch_pmic_id(uint *vendor, uint *rev)
+{
+	int err;
+	u8 r;
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
+	if (err)
+		return err;
+
+	*vendor = r & 0x7;
+	*rev = (r >> 3) & 0x7;
+
+	return 0;
+}
+
+/*
+ * Parse ADC channels to find end of the channel configured by other ADC user
+ * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
+ */
+static int mrstouch_chan_parse(struct mrstouch_dev *tsdev)
+{
+	int err, i, j, found;
+	u32 r32;
+
+	found = -1;
+
+	for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
+		if (found >= 0)
+			break;
+
+		err = intel_scu_ipc_ioread32(PMICADDR0, &r32);
+		if (err)
+			return err;
+
+		for (j = 0; j < 32; j+= 8) {
+			if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) {
+				found = i;
+				break;
+			}
+		}
+	}
+	if (found < 0)
+		return 0;
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+			return -ENOSPC;
+	} else {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+			return -ENOSPC;
+	}
+	return found;
+}
+
+/* Utility to enable/disable pendet.
+ * pendet set to true enables PENDET interrupt
+ * pendet set to false disables PENDET interrupt
+ * Also clears RND mask bit
+*/
+static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet)
+{
+	u16 reg;
+	u8 r;
+	u8 pendet_enabled = 0;
+	int retry = 0;
+	int err;
+
+	err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, &reg);
+	if (err)
+		return err;
+
+	if (pendet) {
+		reg &= ~0x0005;
+		reg |= 0x2000; /* Enable pendet */
+	} else
+		reg &= 0xDFFF; /* Disable pendet */
+
+	/* Set MADCINT and update ADCCNTL1 (next reg byte) */
+	err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg);
+	if (!pendet || err)
+		return err;
+
+	/*
+	 * Sometimes even after the register write succeeds
+	 * the PMIC register value is not updated. Retry few iterations
+	 * to enable pendet.
+	 */
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+	pendet_enabled = (r >> 5) & 0x01;
+
+	retry = 0;
+	while (!err && !pendet_enabled) {
+		retry++;
+		msleep(10);
+		err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, reg >> 8);
+		if (err)
+			break;
+		err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+		if (err == 0)
+			pendet_enabled = (r >> 5) & 0x01;
+		if (retry >= 10) {
+			dev_err(&tsdev->spi->dev, "Touch screen disabled.\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+/* To read PMIC ADC touch screen result
+ * Reads ADC storage registers for higher 7 and lower 3 bits
+ * converts the two readings to single value and turns off gain bit
+ */
+static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
+{
+	int err;
+	u16 result;
+	u32 res;
+
+	result = PMIC_REG_ADCSNS0H + offset;
+
+	if (chan == MRST_TS_CHAN12)
+		result += 4;
+
+	err = intel_scu_ipc_ioread32(result, &res);
+	if (err)
+		return err;
+
+	/* Mash the bits up */
+
+	*vp = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vp |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vp &= 0x3FF;
+
+	res >>= 16;
+
+	*vm = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vm |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vm &= 0x3FF;
+
+	return 0;
+}
+
+/* To configure touch screen channels
+ * Writes touch screen channels to ADC address selection registers
+ */
+static int mrstouch_ts_chan_set(uint offset)
+{
+	int count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	chan = PMICADDR0 + offset;
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = MRST_TS_CHAN10 + count;
+	}
+	reg[count] = chan;
+	data[count] = END_OF_CHANNEL;
+
+	return intel_scu_ipc_writev(reg, data, 5);
+}
+
+/* Initialize ADC */
+static int mrstouch_adc_init(struct mrstouch_dev *tsdev)
+{
+	int err, start;
+	u8 ra, rm;
+
+	err = mrstouch_pmic_id(&tsdev->vendor, &tsdev->rev);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n");
+		return err;
+	}
+
+	start = mrstouch_chan_parse(tsdev);
+	if (start < 0) {
+		dev_err(&tsdev->spi->dev, "Unable to parse channels\n");
+		return start;
+	}
+
+	tsdev->asr = start;
+
+	mrstouch_debug("Channel offset(%d): 0x%X\n", tsdev->asr, tsdev->vendor);
+
+	/* ADC power on, start, enable PENDET and set loop delay
+	 * ADC loop delay is set to 4.5 ms approximately
+	 * Loop delay more than this results in jitter in adc readings
+	 * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+	 * interrupt generation sometimes.
+	 */
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		ra = 0xE0 | ADC_LOOP_DELAY0;
+		rm = 0x5;
+	} else {
+		/* NEC and MAXIm not consistent with loop delay 0 */
+		ra = 0xE0 | ADC_LOOP_DELAY1;
+		rm = 0x0;
+
+		/* configure touch screen channels */
+		err = mrstouch_ts_chan_set(tsdev->asr);
+		if (err)
+			return err;
+	}
+	err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
+	if (err == 0)
+		err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
+	return err;
+}
+
+/* Reports x,y coordinates to event subsystem */
+static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z)
+{
+	int xdiff, ydiff;
+
+	if (tsdev->pendown && z <= TOUCH_PRESSURE) {
+		/* Pen removed, report button release */
+		mrstouch_debug("BTN REL(%d)", z);
+		input_report_key(tsdev->input, BTN_TOUCH, 0);
+		tsdev->pendown = false;
+	}
+
+	xdiff = abs(x - tsdev->x);
+	ydiff = abs(y - tsdev->y);
+
+	/*
+	if x and y values changes for XYMOVE_CNT readings it is considered
+	as stylus is moving. This is required to differentiate between stylus
+	movement and jitter
+	*/
+	if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) {
+		/* Spurious values, release button if touched and return */
+		if (tsdev->pendown) {
+			mrstouch_debug("BTN REL(%d)", z);
+			input_report_key(tsdev->input, BTN_TOUCH, 0);
+			tsdev->pendown = false;
+		}
+		return;
+	} else if (xdiff >= XMOVE_LIMIT || ydiff >= YMOVE_LIMIT) {
+		tsdev->x = x;
+		tsdev->y = y;
+
+		input_report_abs(tsdev->input, ABS_X, x);
+		input_report_abs(tsdev->input, ABS_Y, y);
+		input_sync(tsdev->input);
+	}
+
+
+	if (!tsdev->pendown && z > TOUCH_PRESSURE) {
+		/* Pen touched, report button touch */
+		mrstouch_debug("BTN TCH(%d, %d, %d)", x, y, z);
+		input_report_key(tsdev->input, BTN_TOUCH, 1);
+		tsdev->pendown = true;
+	}
+}
+
+
+/* Utility to start ADC, used by freescale handler */
+static int pendet_mask(void)
+{
+	return 	intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
+}
+
+/* Utility to stop ADC, used by freescale handler */
+static int pendet_umask(void)
+{
+	return 	intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
+}
+
+/* Utility to read ADC, used by freescale handler */
+static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev)
+{
+	int err;
+	u16 x, y, z, result;
+	u16 reg[4];
+	u8 data[4];
+
+	result = PMIC_REG_ADCSNS0H + tsdev->asr;
+
+	reg[0] = result + 4;
+	reg[1] = result + 5;
+	reg[2] = result + 16;
+	reg[3] = result + 17;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	x = data[0] << 3; /* Higher 7 bits */
+	x |= data[1] & 0x7; /* Lower 3 bits */
+	x &= 0x3FF;
+
+	y = data[2] << 3; /* Higher 7 bits */
+	y |= data[3] & 0x7; /* Lower 3 bits */
+	y &= 0x3FF;
+
+	/* Read Z value */
+	reg[0] = result + 28;
+	reg[1] = result + 29;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	z = data[0] << 3; /* Higher 7 bits */
+	z |= data[1] & 0x7; /* Lower 3 bits */
+	z &= 0x3FF;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+	mrstouch_debug("X: %d, Y: %d, Z: %d", x, y, z);
+#endif
+
+	if (z >= TOUCH_PRESSURE_FS) {
+		mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE - 1); /* Pen Removed */
+		return TOUCH_PRESSURE - 1;
+	} else {
+		mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE + 1); /* Pen Touched */
+		return TOUCH_PRESSURE + 1;
+	}
+
+	return 0;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during fs_adc read\n");
+	return err;
+}
+
+/* To handle free scale pmic pendet interrupt */
+static int pmic0_pendet(void *dev_id)
+{
+	int err, count;
+	u16 chan;
+	unsigned int touched;
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)dev_id;
+	u16 reg[5];
+	u8 data[5];
+
+	chan = PMICADDR0 + tsdev->asr;
+
+	/* Set X BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x2A;
+	}
+	reg[count] =  chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Y BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x4A;
+	}
+	reg[count] = chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Z BIAS */
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/*Read touch screen channels till pen removed
+	 * Freescale reports constant value of z for all points
+	 * z is high when screen is not touched and low when touched
+	 * Map high z value to not touched and low z value to pen touched
+	 */
+	touched = mrstouch_pmic_fs_adc_read(tsdev);
+	while (touched > TOUCH_PRESSURE) {
+		touched = mrstouch_pmic_fs_adc_read(tsdev);
+		msleep(WAIT_ADC_COMPLETION);
+	}
+
+	/* Clear all TS channels */
+	chan = PMICADDR0 + tsdev->asr;
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during pendet\n");
+	return err;
+}
+
+
+/* To enable X, Y and Z bias values
+ * Enables YPYM for X channels and XPXM for Y channels
+ */
+static int mrstouch_ts_bias_set(uint offset, uint bias)
+{
+	int count;
+	u16 chan, start;
+	u16 reg[4];
+	u8 data[4];
+
+	chan = PMICADDR0 + offset;
+	start = MRST_TS_CHAN10;
+
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = bias | (start + count);
+	}
+	return intel_scu_ipc_writev(reg, data, 4);
+}
+
+/* To read touch screen channel values */
+static int mrstouch_adc_read(struct mrstouch_dev *tsdev)
+{
+	int err;
+	u16 xp, xm, yp, ym, zp, zm;
+
+	/* configure Y bias for X channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, YBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read x+ and x- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &xp, &xm);
+	if (err)
+		goto ipc_error;
+
+	/* configure x bias for y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, XBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read y+ and y- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, &yp, &ym);
+	if (err)
+		goto ipc_error;
+
+	/* configure z bias for x and y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, ZBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read z+ and z- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &zp, &zm);
+	if (err)
+		goto ipc_error;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+	printk(KERN_INFO "X+: %d, Y+: %d, Z+: %d\n", xp, yp, zp);
+#endif
+
+#if defined(MRSTOUCH_PRINT_XYZM)
+	printk(KERN_INFO "X-: %d, Y-: %d, Z-: %d\n", xm, ym, zm);
+#endif
+
+	mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */
+
+	return zp;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during adc read\n");
+	return err;
+}
+
+/* PENDET interrupt handler function for NEC and MAXIM */
+static void pmic12_pendet(void *data)
+{
+	unsigned int touched;
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+
+	/* read touch screen channels till pen removed */
+	do {
+		touched = mrstouch_adc_read(tsdev);
+	} while (touched > TOUCH_PRESSURE);
+}
+
+/* Handler to process PENDET interrupt */
+int mrstouch_pendet(void *data)
+{
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+	while (1) {
+		/* Wait for PENDET interrupt */
+		if (mutex_lock_interruptible(&tsdev->lock)) {
+			msleep(WAIT_ADC_COMPLETION);
+			continue;
+		}
+
+		if (tsdev->busy)
+			return 0;
+
+		tsdev->busy = true;
+
+		if (tsdev->vendor == PMIC_VENDOR_NEC ||
+			tsdev->vendor == PMIC_VENDOR_MAXIM) {
+			/* PENDET must be disabled in NEC before reading ADC */
+			pendet_enable(tsdev,false); /* Disbale PENDET */
+			pmic12_pendet(tsdev);
+			pendet_enable(tsdev, true); /*Enable PENDET */
+		} else if (tsdev->vendor == PMIC_VENDOR_FS) {
+			pendet_umask(); /* Stop ADC */
+			pmic0_pendet(tsdev);
+			pendet_mask(); /* Stop ADC */
+		} else
+		dev_err(&tsdev->spi->dev, "Unsupported touchscreen: %d\n",
+				tsdev->vendor);
+
+		tsdev->busy = false;
+
+	}
+	return 0;
+}
+
+/* PENDET interrupt handler */
+static irqreturn_t pendet_intr_handler(int irq, void *handle)
+{
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)handle;
+
+	mutex_unlock(&tsdev->lock);
+	return IRQ_HANDLED;
+}
+
+/* Intializes input device and registers with input subsystem */
+static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi)
+{
+	int err = 0;
+
+	mrstouch_debug("%s", __func__);
+
+	tsdev->input = input_allocate_device();
+	if (!tsdev->input) {
+		dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n");
+		return -EINVAL;
+	}
+
+	tsdev->input->name = "mrst_touchscreen";
+	snprintf(tsdev->phys, sizeof(tsdev->phys),
+			"%s/input0", dev_name(&spi->dev));
+	tsdev->input->phys = tsdev->phys;
+	tsdev->input->dev.parent = &spi->dev;
+
+	tsdev->input->id.vendor = tsdev->vendor;
+	tsdev->input->id.version = tsdev->rev;
+
+	tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(tsdev->input, ABS_X, MIN_X, MIN_Y, 0, 0);
+	input_set_abs_params(tsdev->input, ABS_Y, MIN_X, MIN_Y, 0, 0);
+
+	err = input_register_device(tsdev->input);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "unable to register input device\n");
+		input_free_device(tsdev->input);
+		return err;
+	}
+
+	mrstouch_debug("%s", "mrstouch initialized");
+
+	return 0;
+
+}
+
+/* Probe function for touch screen driver */
+static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi)
+{
+	int err;
+	unsigned int myirq;
+	struct mrstouch_dev *tsdev;
+
+	mrstouch_debug("%s(%p)", __func__, mrstouch_spi);
+
+	mrstouchdevp = NULL;
+	myirq = mrstouch_spi->irq;
+
+	if (!mrstouch_spi->irq) {
+		dev_err(&mrstouch_spi->dev, "no interrupt assigned\n");
+		return -EINVAL;
+	}
+
+	tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
+	if (!tsdev) {
+		dev_err(&mrstouch_spi->dev, "unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	tsdev->irq = myirq;
+	mrstouchdevp = tsdev;
+
+	err = mrstouch_adc_init(tsdev);
+	if (err) {
+		dev_err(&mrstouch_spi->dev, "ADC init failed\n");
+		goto mrstouch_err_free_mem;
+	}
+
+	dev_set_drvdata(&mrstouch_spi->dev, tsdev);
+	tsdev->spi = mrstouch_spi;
+
+	err = ts_input_dev_init(tsdev, mrstouch_spi);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "ts_input_dev_init failed");
+		goto mrstouch_err_free_mem;
+	}
+
+	mutex_init(&tsdev->lock);
+	mutex_lock(&tsdev->lock)
+
+	mrstouch_debug("Requesting IRQ-%d", myirq);
+	err = request_irq(myirq, pendet_intr_handler,
+				0, "mrstouch", tsdev);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "unable to allocate irq\n");
+		goto mrstouch_err_free_mem;
+	}
+
+	tsdev->pendet_thrd = kthread_run(mrstouch_pendet,
+				(void *)tsdev, "pendet handler");
+	if (IS_ERR(tsdev->pendet_thrd)) {
+		dev_err(&tsdev->spi->dev, "kthread_run failed\n");
+		err = PTR_ERR(tsdev->pendet_thrd);
+		goto mrstouch_err_free_mem;
+	}
+	mrstouch_debug("%s", "Driver initialized");
+	return 0;
+
+mrstouch_err_free_mem:
+	kfree(tsdev);
+	return err;
+}
+
+static int mrstouch_suspend(struct spi_device *spi, pm_message_t msg)
+{
+	mrstouch_debug("%s", __func__);
+	mrstouchdevp->suspended = 1;
+	return 0;
+}
+
+static int mrstouch_resume(struct spi_device *spi)
+{
+	mrstouch_debug("%s", __func__);
+	mrstouchdevp->suspended = 0;
+	return 0;
+}
+
+static int mrstouch_remove(struct spi_device *spi)
+{
+	mrstouch_debug("%s", __func__);
+	free_irq(mrstouchdevp->irq, mrstouchdevp);
+	input_unregister_device(mrstouchdevp->input);
+	input_free_device(mrstouchdevp->input);
+	if (mrstouchdevp->pendet_thrd)
+		kthread_stop(mrstouchdevp->pendet_thrd);
+	kfree(mrstouchdevp);
+	return 0;
+}
+
+static struct spi_driver mrstouch_driver = {
+	.driver = {
+		.name   = "pmic_touch",
+		.bus    = &spi_bus_type,
+		.owner  = THIS_MODULE,
+	},
+	.probe          = mrstouch_probe,
+	.suspend        = mrstouch_suspend,
+	.resume         = mrstouch_resume,
+	.remove         = mrstouch_remove,
+};
+
+static int __init mrstouch_module_init(void)
+{
+	int err;
+
+	mrstouch_debug("%s", __func__);
+	err = spi_register_driver(&mrstouch_driver);
+	if (err) {
+		mrstouch_debug("%s(%d)", "SPI PENDET failed", err);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __exit mrstouch_module_exit(void)
+{
+	mrstouch_debug("%s", __func__);
+	spi_unregister_driver(&mrstouch_driver);
+	return;
+}
+
+module_init(mrstouch_module_init);
+module_exit(mrstouch_module_exit);
+
+MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
+MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/msm/Kconfig b/drivers/staging/msm/Kconfig
new file mode 100644
index 00000000000..c57039f2060
--- /dev/null
+++ b/drivers/staging/msm/Kconfig
@@ -0,0 +1,134 @@
+config MSM_STAGING
+	tristate "MSM Frame Buffer Support"
+	depends on FB && ARCH_MSM && !FB_MSM
+	select FB_BACKLIGHT if FB_MSM_BACKLIGHT
+	select NEW_LEDS
+	select LEDS_CLASS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for MSM Framebuffer.
+
+if MSM_STAGING
+
+config FB_MSM_LCDC_HW
+	bool
+	default n
+
+choice
+	prompt "MDP HW version"
+	default FB_MSM_MDP31
+
+config FB_MSM_MDP31
+	select FB_MSM_LCDC_HW
+	bool "MDP HW ver3.1"
+	---help---
+	  Support for MSM MDP HW revision 3.1
+	  Say Y here if this is msm8x50 variant platform.
+endchoice
+
+config FB_MSM_LCDC
+	bool
+	default n
+
+config FB_MSM_TVOUT
+	bool
+	default n
+
+config FB_MSM_LCDC_PANEL
+	bool
+	select FB_MSM_LCDC
+	default n
+
+config FB_MSM_LCDC_PRISM_WVGA
+        bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+config FB_MSM_LCDC_ST1_WXGA
+	bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+config FB_MSM_LCDC_ST15_WXGA
+        bool
+        select FB_MSM_LCDC_PANEL
+        default n
+
+config FB_MSM_LCDC_WXGA
+	bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+choice
+	prompt "LCD Panel"
+	default FB_MSM_LCDC_ST15_PANEL
+
+config FB_MSM_LCDC_PRISM_WVGA_PANEL
+	depends on FB_MSM_LCDC_HW
+	bool "LCDC Prism WVGA Panel"
+	select FB_MSM_LCDC_PRISM_WVGA
+	---help---
+	  Support for LCDC Prism WVGA (800x480) panel
+
+
+config FB_MSM_LCDC_ST15_PANEL
+        depends on FB_MSM_LCDC_HW
+        bool "LCDC ST1.5 Panel"
+        select FB_MSM_LCDC_ST15_WXGA
+        ---help---
+          Support for ST1.5 WXGA (1366x768) panel
+
+config FB_MSM_PANEL_NONE
+	bool "NONE"
+	---help---
+	  This will disable LCD panel
+endchoice
+
+choice
+	prompt "Secondary LCD Panel"
+	depends on  FB_MSM_MDP31
+	default FB_MSM_SECONDARY_PANEL_NONE
+
+config FB_MSM_SECONDARY_PANEL_NONE
+	bool "NONE"
+	---help---
+	  No secondary panel
+endchoice
+
+config FB_MSM_TVOUT_NTSC
+	bool
+	select FB_MSM_TVOUT
+	default n
+
+config FB_MSM_TVOUT_PAL
+	bool
+	select FB_MSM_TVOUT
+	default n
+
+choice
+	depends on  (FB_MSM_MDP22 || FB_MSM_MDP31)
+	prompt "TVOut Region"
+	default FB_MSM_TVOUT_NTSC_M
+
+config FB_MSM_TVOUT_NTSC_M
+	bool "NTSC M"
+	select FB_MSM_TVOUT_NTSC
+	---help---
+	  Support for NTSC M region (North American and Korea)
+
+config FB_MSM_TVOUT_NONE
+	bool "NONE"
+	---help---
+	  This will disable TV Out functionality.
+endchoice
+
+config PMEM_KERNEL_SIZE
+        int "PMEM for kernel components (in MB)"
+        default 2
+        depends on ARCH_QSD8X50
+        help
+          Configures the amount of PMEM for use by kernel components
+          (in MB; minimum 2MB)
+endif
diff --git a/drivers/staging/msm/Makefile b/drivers/staging/msm/Makefile
new file mode 100644
index 00000000000..98a0ce177cb
--- /dev/null
+++ b/drivers/staging/msm/Makefile
@@ -0,0 +1,93 @@
+obj-y := msm_fb.o staging-devices.o memory.o
+
+obj-$(CONFIG_FB_MSM_LOGO) += logo.o
+obj-$(CONFIG_FB_BACKLIGHT) += msm_fb_bl.o
+
+# MDP
+obj-y += mdp.o
+
+ifeq ($(CONFIG_FB_MSM_MDP40),y)
+obj-y += mdp4_util.o
+obj-$(CONFIG_DEBUG_FS) += mdp4_debugfs.o
+else
+obj-y += mdp_hw_init.o
+obj-y += mdp_ppp.o
+ifeq ($(CONFIG_FB_MSM_MDP31),y)
+obj-y += mdp_ppp_v31.o
+obj-$(CONFIG_MDP_PPP_ASYNC_OP) += mdp_ppp_dq.o
+else
+obj-y += mdp_ppp_v20.o
+endif
+endif
+
+ifeq ($(CONFIG_FB_MSM_OVERLAY),y)
+obj-y += mdp4_overlay.o
+obj-y += mdp4_overlay_lcdc.o
+obj-y += mdp4_overlay_mddi.o
+else
+obj-y += mdp_dma_lcdc.o
+endif
+
+obj-y += mdp_dma.o
+obj-y += mdp_dma_s.o
+obj-y += mdp_vsync.o
+obj-y += mdp_cursor.o
+obj-y += mdp_dma_tv.o
+
+# EBI2
+obj-$(CONFIG_FB_MSM_EBI2) += ebi2_lcd.o
+
+# LCDC
+obj-$(CONFIG_FB_MSM_LCDC) += lcdc.o
+
+# MDDI
+msm_mddi-objs := mddi.o mddihost.o mddihosti.o
+obj-$(CONFIG_FB_MSM_MDDI) += msm_mddi.o
+
+# External MDDI
+msm_mddi_ext-objs := mddihost_e.o mddi_ext.o
+obj-$(CONFIG_FB_MSM_EXTMDDI) += msm_mddi_ext.o
+
+# TVEnc
+obj-$(CONFIG_FB_MSM_TVOUT) += tvenc.o
+
+# MSM FB Panel
+obj-y += msm_fb_panel.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_tmd20.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_l2f.o
+
+ifeq ($(CONFIG_FB_MSM_MDDI_AUTO_DETECT),y)
+obj-y += mddi_prism.o
+obj-y += mddi_toshiba.o
+obj-y += mddi_toshiba_vga.o
+obj-y += mddi_toshiba_wvga_pt.o
+obj-y += mddi_toshiba_wvga.o
+obj-y += mddi_sharp.o
+else
+obj-$(CONFIG_FB_MSM_MDDI_PRISM_WVGA) += mddi_prism.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON) += mddi_toshiba.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON_VGA) += mddi_toshiba_vga.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA_PORTRAIT) += mddi_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA) += mddi_toshiba_wvga.o
+obj-$(CONFIG_FB_MSM_MDDI_SHARP_QVGA_128x128) += mddi_sharp.o
+endif
+
+obj-$(CONFIG_FB_MSM_LCDC_PANEL) += lcdc_panel.o
+obj-$(CONFIG_FB_MSM_LCDC_PRISM_WVGA) += lcdc_prism.o
+obj-$(CONFIG_FB_MSM_LCDC_EXTERNAL_WXGA) += lcdc_external.o
+obj-$(CONFIG_FB_MSM_LCDC_GORDON_VGA) += lcdc_gordon.o
+obj-$(CONFIG_FB_MSM_LCDC_WXGA) += lcdc_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_TOSHIBA_WVGA_PT) += lcdc_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_SHARP_WVGA_PT) += lcdc_sharp_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_GRAPEFRUIT_VGA) += lcdc_grapefruit.o
+obj-$(CONFIG_FB_MSM_LCDC_ST1_WXGA) += lcdc_st1_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_ST15_WXGA) += lcdc_st15.o
+obj-$(CONFIG_FB_MSM_HDMI_SII_EXTERNAL_720P) += hdmi_sii9022.o
+
+obj-$(CONFIG_FB_MSM_TVOUT_NTSC) += tv_ntsc.o
+obj-$(CONFIG_FB_MSM_TVOUT_PAL) += tv_pal.o
+
+obj-$(CONFIG_FB_MSM_EXTMDDI_SVGA) += mddi_ext_lcd.o
+
+clean:
+	rm *.o .*cmd
diff --git a/drivers/staging/msm/TODO b/drivers/staging/msm/TODO
new file mode 100644
index 00000000000..05107a7d516
--- /dev/null
+++ b/drivers/staging/msm/TODO
@@ -0,0 +1,3 @@
+- Merge this code with the existing MSM framebuffer
+- General style clean ups.
+
diff --git a/drivers/staging/msm/ebi2_l2f.c b/drivers/staging/msm/ebi2_l2f.c
new file mode 100644
index 00000000000..eea891d8f0f
--- /dev/null
+++ b/drivers/staging/msm/ebi2_l2f.c
@@ -0,0 +1,569 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* The following are for MSM5100 on Gator
+*/
+#ifdef FEATURE_PM1000
+#include "pm1000.h"
+#endif /* FEATURE_PM1000 */
+/* The following are for MSM6050 on Bambi
+*/
+#ifdef FEATURE_PMIC_LCDKBD_LED_DRIVER
+#include "pm.h"
+#endif /* FEATURE_PMIC_LCDKBD_LED_DRIVER */
+
+#ifdef DISP_DEVICE_18BPP
+#undef DISP_DEVICE_18BPP
+#define DISP_DEVICE_16BPP
+#endif
+
+#define QCIF_WIDTH        176
+#define QCIF_HEIGHT       220
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_CMD_DISON    0xaf
+#define DISP_CMD_DISOFF   0xae
+#define DISP_CMD_DISNOR   0xa6
+#define DISP_CMD_DISINV   0xa7
+#define DISP_CMD_DISCTL   0xca
+#define DISP_CMD_GCP64    0xcb
+#define DISP_CMD_GCP16    0xcc
+#define DISP_CMD_GSSET    0xcd
+#define DISP_GS_2       0x02
+#define DISP_GS_16      0x01
+#define DISP_GS_64      0x00
+#define DISP_CMD_SLPIN    0x95
+#define DISP_CMD_SLPOUT   0x94
+#define DISP_CMD_SD_PSET  0x75
+#define DISP_CMD_MD_PSET  0x76
+#define DISP_CMD_SD_CSET  0x15
+#define DISP_CMD_MD_CSET  0x16
+#define DISP_CMD_DATCTL   0xbc
+#define DISP_DATCTL_666 0x08
+#define DISP_DATCTL_565 0x28
+#define DISP_DATCTL_444 0x38
+#define DISP_CMD_RAMWR    0x5c
+#define DISP_CMD_RAMRD    0x5d
+#define DISP_CMD_PTLIN    0xa8
+#define DISP_CMD_PTLOUT   0xa9
+#define DISP_CMD_ASCSET   0xaa
+#define DISP_CMD_SCSTART  0xab
+#define DISP_CMD_VOLCTL   0xc6
+#define DISP_VOLCTL_TONE 0x80
+#define DISP_CMD_NOp      0x25
+#define DISP_CMD_OSSEL    0xd0
+#define DISP_CMD_3500KSET 0xd1
+#define DISP_CMD_3500KEND 0xd2
+#define DISP_CMD_14MSET   0xd3
+#define DISP_CMD_14MEND   0xd4
+
+#define DISP_CMD_OUT(cmd) outpw(DISP_CMD_PORT, cmd);
+
+#define DISP_DATA_OUT(data) outpw(DISP_DATA_PORT, data);
+
+#define DISP_DATA_IN() inpw(DISP_DATA_PORT);
+
+/* Epson device column number starts at 2
+*/
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+	  DISP_CMD_OUT(DISP_CMD_SD_PSET) \
+	  DISP_DATA_OUT((ulhc_row) & 0xFF) \
+	  DISP_DATA_OUT((ulhc_row) >> 8) \
+	  DISP_DATA_OUT((lrhc_row) & 0xFF) \
+	  DISP_DATA_OUT((lrhc_row) >> 8) \
+	  DISP_CMD_OUT(DISP_CMD_SD_CSET) \
+	  DISP_DATA_OUT(((ulhc_col)+2) & 0xFF) \
+	  DISP_DATA_OUT(((ulhc_col)+2) >> 8) \
+	  DISP_DATA_OUT(((lrhc_col)+2) & 0xFF) \
+	  DISP_DATA_OUT(((lrhc_col)+2) >> 8)
+
+#define DISP_MIN_CONTRAST      0
+#define DISP_MAX_CONTRAST      127
+#define DISP_DEFAULT_CONTRAST  80
+
+#define DISP_MIN_BACKLIGHT     0
+#define DISP_MAX_BACKLIGHT     15
+#define DISP_DEFAULT_BACKLIGHT 2
+
+#define WAIT_SEC(sec) mdelay((sec)/1000)
+
+static word disp_area_start_row;
+static word disp_area_end_row;
+static byte disp_contrast = DISP_DEFAULT_CONTRAST;
+static boolean disp_powered_up;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+ * it again
+ */
+static boolean display_on = FALSE;
+static void epsonQcif_disp_init(struct platform_device *pdev);
+static void epsonQcif_disp_set_contrast(word contrast);
+static void epsonQcif_disp_set_display_area(word start_row, word end_row);
+static int epsonQcif_disp_off(struct platform_device *pdev);
+static int epsonQcif_disp_on(struct platform_device *pdev);
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres);
+
+volatile word databack;
+static void epsonQcif_disp_init(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	int i;
+
+	if (disp_initialized)
+		return;
+
+	mfd = platform_get_drvdata(pdev);
+
+	DISP_CMD_PORT = mfd->cmd_port;
+	DISP_DATA_PORT = mfd->data_port;
+
+	/* Sleep in */
+	DISP_CMD_OUT(DISP_CMD_SLPIN);
+
+	/* Display off */
+	DISP_CMD_OUT(DISP_CMD_DISOFF);
+
+	/* Display normal */
+	DISP_CMD_OUT(DISP_CMD_DISNOR);
+
+	/* Set data mode */
+	DISP_CMD_OUT(DISP_CMD_DATCTL);
+	DISP_DATA_OUT(DISP_DATCTL_565);
+
+	/* Set display timing */
+	DISP_CMD_OUT(DISP_CMD_DISCTL);
+	DISP_DATA_OUT(0x1c);	/* p1 */
+	DISP_DATA_OUT(0x02);	/* p1 */
+	DISP_DATA_OUT(0x82);	/* p2 */
+	DISP_DATA_OUT(0x00);	/* p3 */
+	DISP_DATA_OUT(0x00);	/* p4 */
+	DISP_DATA_OUT(0xe0);	/* p5 */
+	DISP_DATA_OUT(0x00);	/* p5 */
+	DISP_DATA_OUT(0xdc);	/* p6 */
+	DISP_DATA_OUT(0x00);	/* p6 */
+	DISP_DATA_OUT(0x02);	/* p7 */
+	DISP_DATA_OUT(0x00);	/* p8 */
+
+	/* Set 64 gray scale level */
+	DISP_CMD_OUT(DISP_CMD_GCP64);
+	DISP_DATA_OUT(0x08);	/* p01 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x2a);	/* p02 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x4e);	/* p03 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x6b);	/* p04 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x88);	/* p05 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xa3);	/* p06 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xba);	/* p07 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xd1);	/* p08 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xe5);	/* p09 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xf3);	/* p10 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x03);	/* p11 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x13);	/* p12 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x22);	/* p13 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x2f);	/* p14 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x3b);	/* p15 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x46);	/* p16 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x51);	/* p17 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x5b);	/* p18 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x64);	/* p19 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x6c);	/* p20 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x74);	/* p21 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x7c);	/* p22 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x83);	/* p23 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x8a);	/* p24 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x91);	/* p25 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x98);	/* p26 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x9f);	/* p27 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xa6);	/* p28 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xac);	/* p29 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xb2);	/* p30 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xb7);	/* p31 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xbc);	/* p32 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xc1);	/* p33 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xc6);	/* p34 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xcb);	/* p35 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd0);	/* p36 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd4);	/* p37 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd8);	/* p38 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xdc);	/* p39 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe0);	/* p40 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe4);	/* p41 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe8);	/* p42 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xec);	/* p43 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf0);	/* p44 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf4);	/* p45 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf8);	/* p46 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xfb);	/* p47 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xfe);	/* p48 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x01);	/* p49 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x03);	/* p50 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x05);	/* p51 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x07);	/* p52 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x09);	/* p53 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0b);	/* p54 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0d);	/* p55 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0f);	/* p56 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x11);	/* p57 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x13);	/* p58 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x15);	/* p59 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x17);	/* p60 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x19);	/* p61 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x1b);	/* p62 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x1c);	/* p63 */
+	DISP_DATA_OUT(0x02);
+
+	/* Set 16 gray scale level */
+	DISP_CMD_OUT(DISP_CMD_GCP16);
+	DISP_DATA_OUT(0x1a);	/* p01 */
+	DISP_DATA_OUT(0x32);	/* p02 */
+	DISP_DATA_OUT(0x42);	/* p03 */
+	DISP_DATA_OUT(0x4c);	/* p04 */
+	DISP_DATA_OUT(0x58);	/* p05 */
+	DISP_DATA_OUT(0x5f);	/* p06 */
+	DISP_DATA_OUT(0x66);	/* p07 */
+	DISP_DATA_OUT(0x6b);	/* p08 */
+	DISP_DATA_OUT(0x70);	/* p09 */
+	DISP_DATA_OUT(0x74);	/* p10 */
+	DISP_DATA_OUT(0x78);	/* p11 */
+	DISP_DATA_OUT(0x7b);	/* p12 */
+	DISP_DATA_OUT(0x7e);	/* p13 */
+	DISP_DATA_OUT(0x80);	/* p14 */
+	DISP_DATA_OUT(0x82);	/* p15 */
+
+	/* Set DSP column */
+	DISP_CMD_OUT(DISP_CMD_MD_CSET);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x03);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x03);
+
+	/* Set DSP page */
+	DISP_CMD_OUT(DISP_CMD_MD_PSET);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x01);
+
+	/* Set ARM column */
+	DISP_CMD_OUT(DISP_CMD_SD_CSET);
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT((QCIF_WIDTH + 1) & 0xFF);
+	DISP_DATA_OUT((QCIF_WIDTH + 1) >> 8);
+
+	/* Set ARM page */
+	DISP_CMD_OUT(DISP_CMD_SD_PSET);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT((QCIF_HEIGHT - 1) & 0xFF);
+	DISP_DATA_OUT((QCIF_HEIGHT - 1) >> 8);
+
+	/* Set 64 gray scales */
+	DISP_CMD_OUT(DISP_CMD_GSSET);
+	DISP_DATA_OUT(DISP_GS_64);
+
+	DISP_CMD_OUT(DISP_CMD_OSSEL);
+	DISP_DATA_OUT(0);
+
+	/* Sleep out */
+	DISP_CMD_OUT(DISP_CMD_SLPOUT);
+
+	WAIT_SEC(40000);
+
+	/* Initialize power IC */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+	WAIT_SEC(40000);
+
+	/* Set electronic volume, d'xx */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_DEFAULT_CONTRAST);	/* value from 0 to 127 */
+
+	/* Initialize display data */
+	DISP_SET_RECT(0, (QCIF_HEIGHT - 1), 0, (QCIF_WIDTH - 1));
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	for (i = 0; i < QCIF_HEIGHT * QCIF_WIDTH; i++)
+		DISP_DATA_OUT(0xffff);
+
+	DISP_CMD_OUT(DISP_CMD_RAMRD);
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+
+	WAIT_SEC(80000);
+
+	DISP_CMD_OUT(DISP_CMD_DISON);
+
+	disp_area_start_row = 0;
+	disp_area_end_row = QCIF_HEIGHT - 1;
+	disp_powered_up = TRUE;
+	disp_initialized = TRUE;
+	epsonQcif_disp_set_display_area(0, QCIF_HEIGHT - 1);
+	display_on = TRUE;
+}
+
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres)
+{
+	if (!disp_initialized)
+		return;
+
+	DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void epsonQcif_disp_set_display_area(word start_row, word end_row)
+{
+	if (!disp_initialized)
+		return;
+
+	if ((start_row == disp_area_start_row)
+	    && (end_row == disp_area_end_row))
+		return;
+	disp_area_start_row = start_row;
+	disp_area_end_row = end_row;
+
+	/* Range checking
+	 */
+	if (end_row >= QCIF_HEIGHT)
+		end_row = QCIF_HEIGHT - 1;
+	if (start_row > end_row)
+		start_row = end_row;
+
+	/* When display is not the full screen, gray scale is set to
+	 ** 2; otherwise it is set to 64.
+	 */
+	if ((start_row == 0) && (end_row == (QCIF_HEIGHT - 1))) {
+		/* The whole screen */
+		DISP_CMD_OUT(DISP_CMD_PTLOUT);
+		WAIT_SEC(10000);
+		DISP_CMD_OUT(DISP_CMD_DISOFF);
+		WAIT_SEC(100000);
+		DISP_CMD_OUT(DISP_CMD_GSSET);
+		DISP_DATA_OUT(DISP_GS_64);
+		WAIT_SEC(100000);
+		DISP_CMD_OUT(DISP_CMD_DISON);
+	} else {
+		/* partial screen */
+		DISP_CMD_OUT(DISP_CMD_PTLIN);
+		DISP_DATA_OUT(start_row);
+		DISP_DATA_OUT(start_row >> 8);
+		DISP_DATA_OUT(end_row);
+		DISP_DATA_OUT(end_row >> 8);
+		DISP_CMD_OUT(DISP_CMD_GSSET);
+		DISP_DATA_OUT(DISP_GS_2);
+	}
+}
+
+static int epsonQcif_disp_off(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		epsonQcif_disp_init(pdev);
+
+	if (display_on) {
+		DISP_CMD_OUT(DISP_CMD_DISOFF);
+		DISP_CMD_OUT(DISP_CMD_SLPIN);
+		display_on = FALSE;
+	}
+
+	return 0;
+}
+
+static int epsonQcif_disp_on(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		epsonQcif_disp_init(pdev);
+
+	if (!display_on) {
+		DISP_CMD_OUT(DISP_CMD_SLPOUT);
+		WAIT_SEC(40000);
+		DISP_CMD_OUT(DISP_CMD_DISON);
+		epsonQcif_disp_set_contrast(disp_contrast);
+		display_on = TRUE;
+	}
+
+	return 0;
+}
+
+static void epsonQcif_disp_set_contrast(word contrast)
+{
+	if (!disp_initialized)
+		return;
+
+	/* Initialize power IC, d'24 */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+	WAIT_SEC(40000);
+
+	/* Set electronic volume, d'xx */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	if (contrast > 127)
+		contrast = 127;
+	DISP_DATA_OUT(contrast);	/* value from 0 to 127 */
+	disp_contrast = (byte) contrast;
+}				/* End disp_set_contrast */
+
+static void epsonQcif_disp_clear_screen_area(
+	word start_row, word end_row, word start_column, word end_column) {
+	int32 i;
+
+	/* Clear the display screen */
+	DISP_SET_RECT(start_row, end_row, start_column, end_column);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	i = (end_row - start_row + 1) * (end_column - start_column + 1);
+	for (; i > 0; i--)
+		DISP_DATA_OUT(0xffff);
+}
+
+static int __init epsonQcif_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = epsonQcif_probe,
+	.driver = {
+		.name   = "ebi2_epson_qcif",
+	},
+};
+
+static struct msm_fb_panel_data epsonQcif_panel_data = {
+	.on = epsonQcif_disp_on,
+	.off = epsonQcif_disp_off,
+	.set_rect = epsonQcif_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+	.name   = "ebi2_epson_qcif",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &epsonQcif_panel_data,
+	}
+};
+
+static int __init epsonQcif_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &epsonQcif_panel_data.panel_info;
+		pinfo->xres = QCIF_WIDTH;
+		pinfo->yres = QCIF_HEIGHT;
+		pinfo->type = EBI2_PANEL;
+		pinfo->pdest = DISPLAY_2;
+		pinfo->wait_cycle = 0x808000;
+		pinfo->bpp = 16;
+		pinfo->fb_num = 2;
+		pinfo->lcd.vsync_enable = FALSE;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(epsonQcif_init);
diff --git a/drivers/staging/msm/ebi2_lcd.c b/drivers/staging/msm/ebi2_lcd.c
new file mode 100644
index 00000000000..b41e1230cec
--- /dev/null
+++ b/drivers/staging/msm/ebi2_lcd.c
@@ -0,0 +1,250 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb.h"
+
+static int ebi2_lcd_probe(struct platform_device *pdev);
+static int ebi2_lcd_remove(struct platform_device *pdev);
+
+static struct platform_driver ebi2_lcd_driver = {
+	.probe = ebi2_lcd_probe,
+	.remove = ebi2_lcd_remove,
+	.suspend = NULL,
+	.suspend_late = NULL,
+	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "ebi2_lcd",
+		   },
+};
+
+static void *ebi2_base;
+static void *ebi2_lcd_cfg0;
+static void *ebi2_lcd_cfg1;
+static void __iomem *lcd01_base;
+static void __iomem *lcd02_base;
+static int ebi2_lcd_resource_initialized;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int ebi2_lcd_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc, i;
+
+	if (pdev->id == 0) {
+		for (i = 0; i < pdev->num_resources; i++) {
+			if (!strncmp(pdev->resource[i].name, "base", 4)) {
+				ebi2_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!ebi2_base) {
+					printk(KERN_ERR
+						"ebi2_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+				ebi2_lcd_cfg0 = (void *)(ebi2_base + 0x20);
+				ebi2_lcd_cfg1 = (void *)(ebi2_base + 0x24);
+			} else if (!strncmp(pdev->resource[i].name,
+						"lcd01", 5)) {
+				lcd01_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!lcd01_base) {
+					printk(KERN_ERR
+						"lcd01_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+			} else if (!strncmp(pdev->resource[i].name,
+						"lcd02", 5)) {
+				lcd02_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!lcd02_base) {
+					printk(KERN_ERR
+						"lcd02_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+			}
+		}
+		ebi2_lcd_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!ebi2_lcd_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	if (ebi2_base == NULL)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/* link to the latest pdev */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCD;
+
+	/* add panel data */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "ebi2_lcd_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+
+	/* data chain */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = panel_next_on;
+	pdata->off = panel_next_off;
+	pdata->next = pdev;
+
+	/* get/set panel specific fb info */
+	mfd->panel_info = pdata->panel_info;
+
+	if (mfd->panel_info.bpp == 24)
+		mfd->fb_imgType = MDP_RGB_888;
+	else
+		mfd->fb_imgType = MDP_RGB_565;
+
+	/* config msm ebi2 lcd register */
+	if (mfd->panel_info.pdest == DISPLAY_1) {
+		outp32(ebi2_base,
+		       (inp32(ebi2_base) & (~(EBI2_PRIM_LCD_CLR))) |
+		       EBI2_PRIM_LCD_SEL);
+		/*
+		 * current design has one set of cfg0/1 register to control
+		 * both EBI2 channels. so, we're using the PRIM channel to
+		 * configure both.
+		 */
+		outp32(ebi2_lcd_cfg0, mfd->panel_info.wait_cycle);
+		if (mfd->panel_info.bpp == 18)
+			outp32(ebi2_lcd_cfg1, 0x01000000);
+		else
+			outp32(ebi2_lcd_cfg1, 0x0);
+	} else {
+#ifdef DEBUG_EBI2_LCD
+		/*
+		 * confliting with QCOM SURF FPGA CS.
+		 * OEM should enable below for their CS mapping
+		 */
+		 outp32(ebi2_base, (inp32(ebi2_base)&(~(EBI2_SECD_LCD_CLR)))
+					|EBI2_SECD_LCD_SEL);
+#endif
+	}
+
+	/*
+	 * map cs (chip select) address
+	 */
+	if (mfd->panel_info.pdest == DISPLAY_1) {
+		mfd->cmd_port = lcd01_base;
+		mfd->data_port =
+		    (void *)((uint32) mfd->cmd_port + EBI2_PRIM_LCD_RS_PIN);
+		mfd->data_port_phys =
+		    (void *)(LCD_PRIM_BASE_PHYS + EBI2_PRIM_LCD_RS_PIN);
+	} else {
+		mfd->cmd_port = lcd01_base;
+		mfd->data_port =
+		    (void *)((uint32) mfd->cmd_port + EBI2_SECD_LCD_RS_PIN);
+		mfd->data_port_phys =
+		    (void *)(LCD_SECD_BASE_PHYS + EBI2_SECD_LCD_RS_PIN);
+	}
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc) {
+		goto ebi2_lcd_probe_err;
+	}
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+      ebi2_lcd_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int ebi2_lcd_remove(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return 0;
+
+	if (mfd->key != MFD_KEY)
+		return 0;
+
+	iounmap(mfd->cmd_port);
+
+	return 0;
+}
+
+static int ebi2_lcd_register_driver(void)
+{
+	return platform_driver_register(&ebi2_lcd_driver);
+}
+
+static int __init ebi2_lcd_driver_init(void)
+{
+	return ebi2_lcd_register_driver();
+}
+
+module_init(ebi2_lcd_driver_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/ebi2_tmd20.c b/drivers/staging/msm/ebi2_tmd20.c
new file mode 100644
index 00000000000..d66d0397825
--- /dev/null
+++ b/drivers/staging/msm/ebi2_tmd20.c
@@ -0,0 +1,1122 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* #define TMD20QVGA_LCD_18BPP */
+#define QVGA_WIDTH        240
+#define QVGA_HEIGHT       320
+
+#ifdef TMD20QVGA_LCD_18BPP
+#define DISP_QVGA_18BPP(x)  ((((x)<<2) & 0x3FC00)|(( (x)<<1)& 0x1FE))
+#define DISP_REG(name)  uint32 register_##name;
+#define OUTPORT(x, y)  outpdw(x, y)
+#define INPORT(x)   inpdw(x)
+#else
+#define DISP_QVGA_18BPP(x)  (x)
+#define DISP_REG(name)  uint16 register_##name;
+#define OUTPORT(x, y)  outpw(x, y)
+#define INPORT(x)   intpw(x)
+#endif
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_RNTI         0x10
+
+#define DISP_CMD_OUT(cmd) OUTPORT(DISP_CMD_PORT, DISP_QVGA_18BPP(cmd))
+#define DISP_DATA_OUT(data) OUTPORT(DISP_DATA_PORT, data)
+#define DISP_DATA_IN() INPORT(DISP_DATA_PORT)
+
+#if (defined(TMD20QVGA_LCD_18BPP))
+#define DISP_DATA_OUT_16TO18BPP(x) \
+	DISP_DATA_OUT((((x)&0xf800)<<2|((x)&0x80000)>>3) \
+		     | (((x)&0x7e0)<<1) \
+		     | (((x)&0x1F)<<1|((x)&0x10)>>4))
+#else
+#define DISP_DATA_OUT_16TO18BPP(x) \
+	DISP_DATA_OUT(x)
+#endif
+
+#define DISP_WRITE_OUT(addr, data) \
+   register_##addr = DISP_QVGA_18BPP(data); \
+   DISP_CMD_OUT(addr); \
+   DISP_DATA_OUT(register_##addr);
+
+#define DISP_UPDATE_VALUE(addr, bitmask, data) \
+   DISP_WRITE_OUT(##addr, (register_##addr & ~(bitmask)) | (data));
+
+#define DISP_VAL_IF(bitvalue, bitmask) \
+   ((bitvalue) ? (bitmask) : 0)
+
+/* QVGA = 256 x 320 */
+/* actual display is 240 x 320...offset by 0x10 */
+#define DISP_ROW_COL_TO_ADDR(row, col) ((row) * 0x100 + col)
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+   { \
+   DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, (lrhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, (ulhc_row)); \
+   DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, (lrhc_row)); \
+   DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, (ulhc_row)); \
+   }
+
+#define WAIT_MSEC(msec) mdelay(msec)
+
+/*
+ * TMD QVGA Address
+ */
+/* Display Control */
+#define DISP_START_OSCILLATION_ADDR     0x000
+DISP_REG(DISP_START_OSCILLATION_ADDR)
+#define DISP_DRIVER_OUTPUT_CTL_ADDR     0x001
+    DISP_REG(DISP_DRIVER_OUTPUT_CTL_ADDR)
+#define DISP_LCD_DRIVING_SIG_ADDR     0x002
+    DISP_REG(DISP_LCD_DRIVING_SIG_ADDR)
+#define DISP_ENTRY_MODE_ADDR            0x003
+    DISP_REG(DISP_ENTRY_MODE_ADDR)
+#define DISP_DISPLAY_CTL_1_ADDR         0x007
+    DISP_REG(DISP_DISPLAY_CTL_1_ADDR)
+#define DISP_DISPLAY_CTL_2_ADDR         0x008
+    DISP_REG(DISP_DISPLAY_CTL_2_ADDR)
+
+/* DISPLAY MODE 0x009 partial display not supported */
+#define DISP_POWER_SUPPLY_INTF_ADDR     0x00A
+    DISP_REG(DISP_POWER_SUPPLY_INTF_ADDR)
+
+/* DISPLAY MODE 0x00B xZoom feature is not supported */
+#define DISP_EXT_DISPLAY_CTL_1_ADDR     0x00C
+    DISP_REG(DISP_EXT_DISPLAY_CTL_1_ADDR)
+
+#define DISP_FRAME_CYCLE_CTL_ADDR       0x00D
+    DISP_REG(DISP_FRAME_CYCLE_CTL_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_2_ADDR     0x00E
+    DISP_REG(DISP_EXT_DISPLAY_CTL_2_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_3_ADDR     0x00F
+    DISP_REG(DISP_EXT_DISPLAY_CTL_3_ADDR)
+
+#define DISP_LTPS_CTL_1_ADDR            0x012
+    DISP_REG(DISP_LTPS_CTL_1_ADDR)
+#define DISP_LTPS_CTL_2_ADDR            0x013
+    DISP_REG(DISP_LTPS_CTL_2_ADDR)
+#define DISP_LTPS_CTL_3_ADDR            0x014
+    DISP_REG(DISP_LTPS_CTL_3_ADDR)
+#define DISP_LTPS_CTL_4_ADDR            0x018
+    DISP_REG(DISP_LTPS_CTL_4_ADDR)
+#define DISP_LTPS_CTL_5_ADDR            0x019
+    DISP_REG(DISP_LTPS_CTL_5_ADDR)
+#define DISP_LTPS_CTL_6_ADDR            0x01A
+    DISP_REG(DISP_LTPS_CTL_6_ADDR)
+#define DISP_AMP_SETTING_ADDR           0x01C
+    DISP_REG(DISP_AMP_SETTING_ADDR)
+#define DISP_MODE_SETTING_ADDR          0x01D
+    DISP_REG(DISP_MODE_SETTING_ADDR)
+#define DISP_POFF_LN_SETTING_ADDR       0x01E
+    DISP_REG(DISP_POFF_LN_SETTING_ADDR)
+/* Power Contol */
+#define DISP_POWER_CTL_1_ADDR           0x100
+    DISP_REG(DISP_POWER_CTL_1_ADDR)
+#define DISP_POWER_CTL_2_ADDR           0x101
+    DISP_REG(DISP_POWER_CTL_2_ADDR)
+#define DISP_POWER_CTL_3_ADDR           0x102
+    DISP_REG(DISP_POWER_CTL_3_ADDR)
+#define DISP_POWER_CTL_4_ADDR           0x103
+    DISP_REG(DISP_POWER_CTL_4_ADDR)
+#define DISP_POWER_CTL_5_ADDR           0x104
+    DISP_REG(DISP_POWER_CTL_5_ADDR)
+#define DISP_POWER_CTL_6_ADDR           0x105
+    DISP_REG(DISP_POWER_CTL_6_ADDR)
+#define DISP_POWER_CTL_7_ADDR           0x106
+    DISP_REG(DISP_POWER_CTL_7_ADDR)
+/* RAM Access */
+#define DISP_RAM_ADDR_SET_1_ADDR        0x200
+    DISP_REG(DISP_RAM_ADDR_SET_1_ADDR)
+#define DISP_RAM_ADDR_SET_2_ADDR        0x201
+    DISP_REG(DISP_RAM_ADDR_SET_2_ADDR)
+#define DISP_CMD_RAMRD                  DISP_CMD_RAMWR
+#define DISP_CMD_RAMWR                  0x202
+    DISP_REG(DISP_CMD_RAMWR)
+#define DISP_RAM_DATA_MASK_1_ADDR       0x203
+    DISP_REG(DISP_RAM_DATA_MASK_1_ADDR)
+#define DISP_RAM_DATA_MASK_2_ADDR       0x204
+    DISP_REG(DISP_RAM_DATA_MASK_2_ADDR)
+/* Gamma Control, Contrast, Gray Scale Setting */
+#define DISP_GAMMA_CONTROL_1_ADDR       0x300
+    DISP_REG(DISP_GAMMA_CONTROL_1_ADDR)
+#define DISP_GAMMA_CONTROL_2_ADDR       0x301
+    DISP_REG(DISP_GAMMA_CONTROL_2_ADDR)
+#define DISP_GAMMA_CONTROL_3_ADDR       0x302
+    DISP_REG(DISP_GAMMA_CONTROL_3_ADDR)
+#define DISP_GAMMA_CONTROL_4_ADDR       0x303
+    DISP_REG(DISP_GAMMA_CONTROL_4_ADDR)
+#define DISP_GAMMA_CONTROL_5_ADDR       0x304
+    DISP_REG(DISP_GAMMA_CONTROL_5_ADDR)
+/* Coordinate Control */
+#define DISP_VERT_SCROLL_CTL_1_ADDR     0x400
+    DISP_REG(DISP_VERT_SCROLL_CTL_1_ADDR)
+#define DISP_VERT_SCROLL_CTL_2_ADDR     0x401
+    DISP_REG(DISP_VERT_SCROLL_CTL_2_ADDR)
+#define DISP_SCREEN_1_DRV_POS_1_ADDR    0x402
+    DISP_REG(DISP_SCREEN_1_DRV_POS_1_ADDR)
+#define DISP_SCREEN_1_DRV_POS_2_ADDR    0x403
+    DISP_REG(DISP_SCREEN_1_DRV_POS_2_ADDR)
+#define DISP_SCREEN_2_DRV_POS_1_ADDR    0x404
+    DISP_REG(DISP_SCREEN_2_DRV_POS_1_ADDR)
+#define DISP_SCREEN_2_DRV_POS_2_ADDR    0x405
+    DISP_REG(DISP_SCREEN_2_DRV_POS_2_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_1_ADDR   0x406
+    DISP_REG(DISP_HORZ_RAM_ADDR_POS_1_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_2_ADDR   0x407
+    DISP_REG(DISP_HORZ_RAM_ADDR_POS_2_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_1_ADDR   0x408
+    DISP_REG(DISP_VERT_RAM_ADDR_POS_1_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_2_ADDR   0x409
+    DISP_REG(DISP_VERT_RAM_ADDR_POS_2_ADDR)
+#define DISP_TMD_700_ADDR               0x700	/*  0x700 */
+    DISP_REG(DISP_TMD_700_ADDR)
+#define DISP_TMD_015_ADDR               0x015	/*  0x700 */
+    DISP_REG(DISP_TMD_015_ADDR)
+#define DISP_TMD_305_ADDR               0x305	/*  0x700 */
+    DISP_REG(DISP_TMD_305_ADDR)
+
+/*
+ * TMD QVGA Bit Definations
+ */
+
+#define DISP_BIT_IB15              0x8000
+#define DISP_BIT_IB14              0x4000
+#define DISP_BIT_IB13              0x2000
+#define DISP_BIT_IB12              0x1000
+#define DISP_BIT_IB11              0x0800
+#define DISP_BIT_IB10              0x0400
+#define DISP_BIT_IB09              0x0200
+#define DISP_BIT_IB08              0x0100
+#define DISP_BIT_IB07              0x0080
+#define DISP_BIT_IB06              0x0040
+#define DISP_BIT_IB05              0x0020
+#define DISP_BIT_IB04              0x0010
+#define DISP_BIT_IB03              0x0008
+#define DISP_BIT_IB02              0x0004
+#define DISP_BIT_IB01              0x0002
+#define DISP_BIT_IB00              0x0001
+/*
+ * Display Control
+ * DISP_START_OSCILLATION_ADDR     Start Oscillation
+ * DISP_DRIVER_OUTPUT_CTL_ADDR     Driver Output Control
+ */
+#define DISP_BITMASK_SS            DISP_BIT_IB08
+#define DISP_BITMASK_NL5           DISP_BIT_IB05
+#define DISP_BITMASK_NL4           DISP_BIT_IB04
+#define DISP_BITMASK_NL3           DISP_BIT_IB03
+#define DISP_BITMASK_NL2           DISP_BIT_IB02
+#define DISP_BITMASK_NL1           DISP_BIT_IB01
+#define DISP_BITMASK_NL0           DISP_BIT_IB00
+/* DISP_LCD_DRIVING_SIG_ADDR       LCD Driving Signal Setting */
+#define DISP_BITMASK_BC            DISP_BIT_IB09
+/* DISP_ENTRY_MODE_ADDR            Entry Mode */
+#define DISP_BITMASK_TRI           DISP_BIT_IB15
+#define DISP_BITMASK_DFM1          DISP_BIT_IB14
+#define DISP_BITMASK_DFM0          DISP_BIT_IB13
+#define DISP_BITMASK_BGR           DISP_BIT_IB12
+#define DISP_BITMASK_HWM0          DISP_BIT_IB08
+#define DISP_BITMASK_ID1           DISP_BIT_IB05
+#define DISP_BITMASK_ID0           DISP_BIT_IB04
+#define DISP_BITMASK_AM            DISP_BIT_IB03
+/* DISP_DISPLAY_CTL_1_ADDR         Display Control (1) */
+#define DISP_BITMASK_COL1          DISP_BIT_IB15
+#define DISP_BITMASK_COL0          DISP_BIT_IB14
+#define DISP_BITMASK_VLE2          DISP_BIT_IB10
+#define DISP_BITMASK_VLE1          DISP_BIT_IB09
+#define DISP_BITMASK_SPT           DISP_BIT_IB08
+#define DISP_BITMASK_PT1           DISP_BIT_IB07
+#define DISP_BITMASK_PT0           DISP_BIT_IB06
+#define DISP_BITMASK_REV           DISP_BIT_IB02
+/* DISP_DISPLAY_CTL_2_ADDR         Display Control (2) */
+#define DISP_BITMASK_FP3           DISP_BIT_IB11
+#define DISP_BITMASK_FP2           DISP_BIT_IB10
+#define DISP_BITMASK_FP1           DISP_BIT_IB09
+#define DISP_BITMASK_FP0           DISP_BIT_IB08
+#define DISP_BITMASK_BP3           DISP_BIT_IB03
+#define DISP_BITMASK_BP2           DISP_BIT_IB02
+#define DISP_BITMASK_BP1           DISP_BIT_IB01
+#define DISP_BITMASK_BP0           DISP_BIT_IB00
+/* DISP_POWER_SUPPLY_INTF_ADDR     Power Supply IC Interface Control */
+#define DISP_BITMASK_CSE           DISP_BIT_IB12
+#define DISP_BITMASK_TE            DISP_BIT_IB08
+#define DISP_BITMASK_IX3           DISP_BIT_IB03
+#define DISP_BITMASK_IX2           DISP_BIT_IB02
+#define DISP_BITMASK_IX1           DISP_BIT_IB01
+#define DISP_BITMASK_IX0           DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_1_ADDR     External Display Interface Control (1) */
+#define DISP_BITMASK_RM            DISP_BIT_IB08
+#define DISP_BITMASK_DM1           DISP_BIT_IB05
+#define DISP_BITMASK_DM0           DISP_BIT_IB04
+#define DISP_BITMASK_RIM1          DISP_BIT_IB01
+#define DISP_BITMASK_RIM0          DISP_BIT_IB00
+/* DISP_FRAME_CYCLE_CTL_ADDR       Frame Frequency Adjustment Control */
+#define DISP_BITMASK_DIVI1         DISP_BIT_IB09
+#define DISP_BITMASK_DIVI0         DISP_BIT_IB08
+#define DISP_BITMASK_RTNI4         DISP_BIT_IB04
+#define DISP_BITMASK_RTNI3         DISP_BIT_IB03
+#define DISP_BITMASK_RTNI2         DISP_BIT_IB02
+#define DISP_BITMASK_RTNI1         DISP_BIT_IB01
+#define DISP_BITMASK_RTNI0         DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_2_ADDR     External Display Interface Control (2) */
+#define DISP_BITMASK_DIVE1         DISP_BIT_IB09
+#define DISP_BITMASK_DIVE0         DISP_BIT_IB08
+#define DISP_BITMASK_RTNE7         DISP_BIT_IB07
+#define DISP_BITMASK_RTNE6         DISP_BIT_IB06
+#define DISP_BITMASK_RTNE5         DISP_BIT_IB05
+#define DISP_BITMASK_RTNE4         DISP_BIT_IB04
+#define DISP_BITMASK_RTNE3         DISP_BIT_IB03
+#define DISP_BITMASK_RTNE2         DISP_BIT_IB02
+#define DISP_BITMASK_RTNE1         DISP_BIT_IB01
+#define DISP_BITMASK_RTNE0         DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_3_ADDR     External Display Interface Control (3) */
+#define DISP_BITMASK_VSPL          DISP_BIT_IB04
+#define DISP_BITMASK_HSPL          DISP_BIT_IB03
+#define DISP_BITMASK_VPL           DISP_BIT_IB02
+#define DISP_BITMASK_EPL           DISP_BIT_IB01
+#define DISP_BITMASK_DPL           DISP_BIT_IB00
+/* DISP_LTPS_CTL_1_ADDR            LTPS Interface Control (1) */
+#define DISP_BITMASK_CLWI3         DISP_BIT_IB11
+#define DISP_BITMASK_CLWI2         DISP_BIT_IB10
+#define DISP_BITMASK_CLWI1         DISP_BIT_IB09
+#define DISP_BITMASK_CLWI0         DISP_BIT_IB08
+#define DISP_BITMASK_CLTI1         DISP_BIT_IB01
+#define DISP_BITMASK_CLTI0         DISP_BIT_IB00
+/* DISP_LTPS_CTL_2_ADDR            LTPS Interface Control (2) */
+#define DISP_BITMASK_OEVBI1        DISP_BIT_IB09
+#define DISP_BITMASK_OEVBI0        DISP_BIT_IB08
+#define DISP_BITMASK_OEVFI1        DISP_BIT_IB01
+#define DISP_BITMASK_OEVFI0        DISP_BIT_IB00
+/* DISP_LTPS_CTL_3_ADDR            LTPS Interface Control (3) */
+#define DISP_BITMASK_SHI1          DISP_BIT_IB01
+#define DISP_BITMASK_SHI0          DISP_BIT_IB00
+/* DISP_LTPS_CTL_4_ADDR            LTPS Interface Control (4) */
+#define DISP_BITMASK_CLWE5         DISP_BIT_IB13
+#define DISP_BITMASK_CLWE4         DISP_BIT_IB12
+#define DISP_BITMASK_CLWE3         DISP_BIT_IB11
+#define DISP_BITMASK_CLWE2         DISP_BIT_IB10
+#define DISP_BITMASK_CLWE1         DISP_BIT_IB09
+#define DISP_BITMASK_CLWE0         DISP_BIT_IB08
+#define DISP_BITMASK_CLTE3         DISP_BIT_IB03
+#define DISP_BITMASK_CLTE2         DISP_BIT_IB02
+#define DISP_BITMASK_CLTE1         DISP_BIT_IB01
+#define DISP_BITMASK_CLTE0         DISP_BIT_IB00
+/* DISP_LTPS_CTL_5_ADDR            LTPS Interface Control (5) */
+#define DISP_BITMASK_OEVBE3        DISP_BIT_IB11
+#define DISP_BITMASK_OEVBE2        DISP_BIT_IB10
+#define DISP_BITMASK_OEVBE1        DISP_BIT_IB09
+#define DISP_BITMASK_OEVBE0        DISP_BIT_IB08
+#define DISP_BITMASK_OEVFE3        DISP_BIT_IB03
+#define DISP_BITMASK_OEVFE2        DISP_BIT_IB02
+#define DISP_BITMASK_OEVFE1        DISP_BIT_IB01
+#define DISP_BITMASK_OEVFE0        DISP_BIT_IB00
+/* DISP_LTPS_CTL_6_ADDR            LTPS Interface Control (6) */
+#define DISP_BITMASK_SHE3          DISP_BIT_IB03
+#define DISP_BITMASK_SHE2          DISP_BIT_IB02
+#define DISP_BITMASK_SHE1          DISP_BIT_IB01
+#define DISP_BITMASK_SHE0          DISP_BIT_IB00
+/* DISP_AMP_SETTING_ADDR           Amplify Setting */
+#define DISP_BITMASK_ABSW1         DISP_BIT_IB01
+#define DISP_BITMASK_ABSW0         DISP_BIT_IB00
+/* DISP_MODE_SETTING_ADDR          Mode Setting */
+#define DISP_BITMASK_DSTB          DISP_BIT_IB02
+#define DISP_BITMASK_STB           DISP_BIT_IB00
+/* DISP_POFF_LN_SETTING_ADDR       Power Off Line Setting */
+#define DISP_BITMASK_POFH3         DISP_BIT_IB03
+#define DISP_BITMASK_POFH2         DISP_BIT_IB02
+#define DISP_BITMASK_POFH1         DISP_BIT_IB01
+#define DISP_BITMASK_POFH0         DISP_BIT_IB00
+
+/* Power Contol */
+/* DISP_POWER_CTL_1_ADDR           Power Control (1) */
+#define DISP_BITMASK_PO            DISP_BIT_IB11
+#define DISP_BITMASK_VCD           DISP_BIT_IB09
+#define DISP_BITMASK_VSC           DISP_BIT_IB08
+#define DISP_BITMASK_CON           DISP_BIT_IB07
+#define DISP_BITMASK_ASW1          DISP_BIT_IB06
+#define DISP_BITMASK_ASW0          DISP_BIT_IB05
+#define DISP_BITMASK_OEV           DISP_BIT_IB04
+#define DISP_BITMASK_OEVE          DISP_BIT_IB03
+#define DISP_BITMASK_FR            DISP_BIT_IB02
+#define DISP_BITMASK_D1            DISP_BIT_IB01
+#define DISP_BITMASK_D0            DISP_BIT_IB00
+/* DISP_POWER_CTL_2_ADDR           Power Control (2) */
+#define DISP_BITMASK_DC4           DISP_BIT_IB15
+#define DISP_BITMASK_DC3           DISP_BIT_IB14
+#define DISP_BITMASK_SAP2          DISP_BIT_IB13
+#define DISP_BITMASK_SAP1          DISP_BIT_IB12
+#define DISP_BITMASK_SAP0          DISP_BIT_IB11
+#define DISP_BITMASK_BT2           DISP_BIT_IB10
+#define DISP_BITMASK_BT1           DISP_BIT_IB09
+#define DISP_BITMASK_BT0           DISP_BIT_IB08
+#define DISP_BITMASK_DC2           DISP_BIT_IB07
+#define DISP_BITMASK_DC1           DISP_BIT_IB06
+#define DISP_BITMASK_DC0           DISP_BIT_IB05
+#define DISP_BITMASK_AP2           DISP_BIT_IB04
+#define DISP_BITMASK_AP1           DISP_BIT_IB03
+#define DISP_BITMASK_AP0           DISP_BIT_IB02
+/* DISP_POWER_CTL_3_ADDR           Power Control (3) */
+#define DISP_BITMASK_VGL4          DISP_BIT_IB10
+#define DISP_BITMASK_VGL3          DISP_BIT_IB09
+#define DISP_BITMASK_VGL2          DISP_BIT_IB08
+#define DISP_BITMASK_VGL1          DISP_BIT_IB07
+#define DISP_BITMASK_VGL0          DISP_BIT_IB06
+#define DISP_BITMASK_VGH4          DISP_BIT_IB04
+#define DISP_BITMASK_VGH3          DISP_BIT_IB03
+#define DISP_BITMASK_VGH2          DISP_BIT_IB02
+#define DISP_BITMASK_VGH1          DISP_BIT_IB01
+#define DISP_BITMASK_VGH0          DISP_BIT_IB00
+/* DISP_POWER_CTL_4_ADDR           Power Control (4) */
+#define DISP_BITMASK_VC2           DISP_BIT_IB02
+#define DISP_BITMASK_VC1           DISP_BIT_IB01
+#define DISP_BITMASK_VC0           DISP_BIT_IB00
+/* DISP_POWER_CTL_5_ADDR           Power Control (5) */
+#define DISP_BITMASK_VRL3          DISP_BIT_IB11
+#define DISP_BITMASK_VRL2          DISP_BIT_IB10
+#define DISP_BITMASK_VRL1          DISP_BIT_IB09
+#define DISP_BITMASK_VRL0          DISP_BIT_IB08
+#define DISP_BITMASK_PON           DISP_BIT_IB04
+#define DISP_BITMASK_VRH3          DISP_BIT_IB03
+#define DISP_BITMASK_VRH2          DISP_BIT_IB02
+#define DISP_BITMASK_VRH1          DISP_BIT_IB01
+#define DISP_BITMASK_VRH0          DISP_BIT_IB00
+/* DISP_POWER_CTL_6_ADDR           Power Control (6) */
+#define DISP_BITMASK_VCOMG         DISP_BIT_IB13
+#define DISP_BITMASK_VDV4          DISP_BIT_IB12
+#define DISP_BITMASK_VDV3          DISP_BIT_IB11
+#define DISP_BITMASK_VDV2          DISP_BIT_IB10
+#define DISP_BITMASK_VDV1          DISP_BIT_IB09
+#define DISP_BITMASK_VDV0          DISP_BIT_IB08
+#define DISP_BITMASK_VCM4          DISP_BIT_IB04
+#define DISP_BITMASK_VCM3          DISP_BIT_IB03
+#define DISP_BITMASK_VCM2          DISP_BIT_IB02
+#define DISP_BITMASK_VCM1          DISP_BIT_IB01
+#define DISP_BITMASK_VCM0          DISP_BIT_IB00
+/* RAM Access */
+/* DISP_RAM_ADDR_SET_1_ADDR        RAM Address Set (1) */
+#define DISP_BITMASK_AD7           DISP_BIT_IB07
+#define DISP_BITMASK_AD6           DISP_BIT_IB06
+#define DISP_BITMASK_AD5           DISP_BIT_IB05
+#define DISP_BITMASK_AD4           DISP_BIT_IB04
+#define DISP_BITMASK_AD3           DISP_BIT_IB03
+#define DISP_BITMASK_AD2           DISP_BIT_IB02
+#define DISP_BITMASK_AD1           DISP_BIT_IB01
+#define DISP_BITMASK_AD0           DISP_BIT_IB00
+/* DISP_RAM_ADDR_SET_2_ADDR        RAM Address Set (2) */
+#define DISP_BITMASK_AD16          DISP_BIT_IB08
+#define DISP_BITMASK_AD15          DISP_BIT_IB07
+#define DISP_BITMASK_AD14          DISP_BIT_IB06
+#define DISP_BITMASK_AD13          DISP_BIT_IB05
+#define DISP_BITMASK_AD12          DISP_BIT_IB04
+#define DISP_BITMASK_AD11          DISP_BIT_IB03
+#define DISP_BITMASK_AD10          DISP_BIT_IB02
+#define DISP_BITMASK_AD9           DISP_BIT_IB01
+#define DISP_BITMASK_AD8           DISP_BIT_IB00
+/*
+ * DISP_CMD_RAMWR       RAM Data Read/Write
+ * Use Data Bit Configuration
+ */
+/* DISP_RAM_DATA_MASK_1_ADDR       RAM Write Data Mask (1) */
+#define DISP_BITMASK_WM11          DISP_BIT_IB13
+#define DISP_BITMASK_WM10          DISP_BIT_IB12
+#define DISP_BITMASK_WM9           DISP_BIT_IB11
+#define DISP_BITMASK_WM8           DISP_BIT_IB10
+#define DISP_BITMASK_WM7           DISP_BIT_IB09
+#define DISP_BITMASK_WM6           DISP_BIT_IB08
+#define DISP_BITMASK_WM5           DISP_BIT_IB05
+#define DISP_BITMASK_WM4           DISP_BIT_IB04
+#define DISP_BITMASK_WM3           DISP_BIT_IB03
+#define DISP_BITMASK_WM2           DISP_BIT_IB02
+#define DISP_BITMASK_WM1           DISP_BIT_IB01
+#define DISP_BITMASK_WM0           DISP_BIT_IB00
+/* DISP_RAM_DATA_MASK_2_ADDR       RAM Write Data Mask (2) */
+#define DISP_BITMASK_WM17          DISP_BIT_IB05
+#define DISP_BITMASK_WM16          DISP_BIT_IB04
+#define DISP_BITMASK_WM15          DISP_BIT_IB03
+#define DISP_BITMASK_WM14          DISP_BIT_IB02
+#define DISP_BITMASK_WM13          DISP_BIT_IB01
+#define DISP_BITMASK_WM12          DISP_BIT_IB00
+/*Gamma Control */
+/* DISP_GAMMA_CONTROL_1_ADDR       Gamma Control (1) */
+#define DISP_BITMASK_PKP12         DISP_BIT_IB10
+#define DISP_BITMASK_PKP11         DISP_BIT_IB08
+#define DISP_BITMASK_PKP10         DISP_BIT_IB09
+#define DISP_BITMASK_PKP02         DISP_BIT_IB02
+#define DISP_BITMASK_PKP01         DISP_BIT_IB01
+#define DISP_BITMASK_PKP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_2_ADDR       Gamma Control (2) */
+#define DISP_BITMASK_PKP32         DISP_BIT_IB10
+#define DISP_BITMASK_PKP31         DISP_BIT_IB09
+#define DISP_BITMASK_PKP30         DISP_BIT_IB08
+#define DISP_BITMASK_PKP22         DISP_BIT_IB02
+#define DISP_BITMASK_PKP21         DISP_BIT_IB01
+#define DISP_BITMASK_PKP20         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_3_ADDR       Gamma Control (3) */
+#define DISP_BITMASK_PKP52         DISP_BIT_IB10
+#define DISP_BITMASK_PKP51         DISP_BIT_IB09
+#define DISP_BITMASK_PKP50         DISP_BIT_IB08
+#define DISP_BITMASK_PKP42         DISP_BIT_IB02
+#define DISP_BITMASK_PKP41         DISP_BIT_IB01
+#define DISP_BITMASK_PKP40         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_4_ADDR       Gamma Control (4) */
+#define DISP_BITMASK_PRP12         DISP_BIT_IB10
+#define DISP_BITMASK_PRP11         DISP_BIT_IB08
+#define DISP_BITMASK_PRP10         DISP_BIT_IB09
+#define DISP_BITMASK_PRP02         DISP_BIT_IB02
+#define DISP_BITMASK_PRP01         DISP_BIT_IB01
+#define DISP_BITMASK_PRP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_5_ADDR       Gamma Control (5) */
+#define DISP_BITMASK_VRP14         DISP_BIT_IB12
+#define DISP_BITMASK_VRP13         DISP_BIT_IB11
+#define DISP_BITMASK_VRP12         DISP_BIT_IB10
+#define DISP_BITMASK_VRP11         DISP_BIT_IB08
+#define DISP_BITMASK_VRP10         DISP_BIT_IB09
+#define DISP_BITMASK_VRP03         DISP_BIT_IB03
+#define DISP_BITMASK_VRP02         DISP_BIT_IB02
+#define DISP_BITMASK_VRP01         DISP_BIT_IB01
+#define DISP_BITMASK_VRP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_6_ADDR       Gamma Control (6) */
+#define DISP_BITMASK_PKN12         DISP_BIT_IB10
+#define DISP_BITMASK_PKN11         DISP_BIT_IB08
+#define DISP_BITMASK_PKN10         DISP_BIT_IB09
+#define DISP_BITMASK_PKN02         DISP_BIT_IB02
+#define DISP_BITMASK_PKN01         DISP_BIT_IB01
+#define DISP_BITMASK_PKN00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_7_ADDR       Gamma Control (7) */
+#define DISP_BITMASK_PKN32         DISP_BIT_IB10
+#define DISP_BITMASK_PKN31         DISP_BIT_IB08
+#define DISP_BITMASK_PKN30         DISP_BIT_IB09
+#define DISP_BITMASK_PKN22         DISP_BIT_IB02
+#define DISP_BITMASK_PKN21         DISP_BIT_IB01
+#define DISP_BITMASK_PKN20         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_8_ADDR       Gamma Control (8) */
+#define DISP_BITMASK_PKN52         DISP_BIT_IB10
+#define DISP_BITMASK_PKN51         DISP_BIT_IB08
+#define DISP_BITMASK_PKN50         DISP_BIT_IB09
+#define DISP_BITMASK_PKN42         DISP_BIT_IB02
+#define DISP_BITMASK_PKN41         DISP_BIT_IB01
+#define DISP_BITMASK_PKN40         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_9_ADDR       Gamma Control (9) */
+#define DISP_BITMASK_PRN12         DISP_BIT_IB10
+#define DISP_BITMASK_PRN11         DISP_BIT_IB08
+#define DISP_BITMASK_PRN10         DISP_BIT_IB09
+#define DISP_BITMASK_PRN02         DISP_BIT_IB02
+#define DISP_BITMASK_PRN01         DISP_BIT_IB01
+#define DISP_BITMASK_PRN00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_10_ADDR      Gamma Control (10) */
+#define DISP_BITMASK_VRN14         DISP_BIT_IB12
+#define DISP_BITMASK_VRN13         DISP_BIT_IB11
+#define DISP_BITMASK_VRN12         DISP_BIT_IB10
+#define DISP_BITMASK_VRN11         DISP_BIT_IB08
+#define DISP_BITMASK_VRN10         DISP_BIT_IB09
+#define DISP_BITMASK_VRN03         DISP_BIT_IB03
+#define DISP_BITMASK_VRN02         DISP_BIT_IB02
+#define DISP_BITMASK_VRN01         DISP_BIT_IB01
+#define DISP_BITMASK_VRN00         DISP_BIT_IB00
+/* Coordinate Control */
+/* DISP_VERT_SCROLL_CTL_1_ADDR     Vertical Scroll Control (1) */
+#define DISP_BITMASK_VL18          DISP_BIT_IB08
+#define DISP_BITMASK_VL17          DISP_BIT_IB07
+#define DISP_BITMASK_VL16          DISP_BIT_IB06
+#define DISP_BITMASK_VL15          DISP_BIT_IB05
+#define DISP_BITMASK_VL14          DISP_BIT_IB04
+#define DISP_BITMASK_VL13          DISP_BIT_IB03
+#define DISP_BITMASK_VL12          DISP_BIT_IB02
+#define DISP_BITMASK_VL11          DISP_BIT_IB01
+#define DISP_BITMASK_VL10          DISP_BIT_IB00
+/* DISP_VERT_SCROLL_CTL_2_ADDR     Vertical Scroll Control (2) */
+#define DISP_BITMASK_VL28          DISP_BIT_IB08
+#define DISP_BITMASK_VL27          DISP_BIT_IB07
+#define DISP_BITMASK_VL26          DISP_BIT_IB06
+#define DISP_BITMASK_VL25          DISP_BIT_IB05
+#define DISP_BITMASK_VL24          DISP_BIT_IB04
+#define DISP_BITMASK_VL23          DISP_BIT_IB03
+#define DISP_BITMASK_VL22          DISP_BIT_IB02
+#define DISP_BITMASK_VL21          DISP_BIT_IB01
+#define DISP_BITMASK_VL20          DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_1_ADDR    First Screen Driving Position (1) */
+#define DISP_BITMASK_SS18          DISP_BIT_IB08
+#define DISP_BITMASK_SS17          DISP_BIT_IB07
+#define DISP_BITMASK_SS16          DISP_BIT_IB06
+#define DISP_BITMASK_SS15          DISP_BIT_IB05
+#define DISP_BITMASK_SS14          DISP_BIT_IB04
+#define DISP_BITMASK_SS13          DISP_BIT_IB03
+#define DISP_BITMASK_SS12          DISP_BIT_IB02
+#define DISP_BITMASK_SS11          DISP_BIT_IB01
+#define DISP_BITMASK_SS10          DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_2_ADDR    First Screen Driving Position (2) */
+#define DISP_BITMASK_SE18          DISP_BIT_IB08
+#define DISP_BITMASK_SE17          DISP_BIT_IB07
+#define DISP_BITMASK_SE16          DISP_BIT_IB06
+#define DISP_BITMASK_SE15          DISP_BIT_IB05
+#define DISP_BITMASK_SE14          DISP_BIT_IB04
+#define DISP_BITMASK_SE13          DISP_BIT_IB03
+#define DISP_BITMASK_SE12          DISP_BIT_IB02
+#define DISP_BITMASK_SE11          DISP_BIT_IB01
+#define DISP_BITMASK_SE10          DISP_BIT_IB00
+/* DISP_SCREEN_2_DRV_POS_1_ADDR    Second Screen Driving Position (1) */
+#define DISP_BITMASK_SS28          DISP_BIT_IB08
+#define DISP_BITMASK_SS27          DISP_BIT_IB07
+#define DISP_BITMASK_SS26          DISP_BIT_IB06
+#define DISP_BITMASK_SS25          DISP_BIT_IB05
+#define DISP_BITMASK_SS24          DISP_BIT_IB04
+#define DISP_BITMASK_SS23          DISP_BIT_IB03
+#define DISP_BITMASK_SS22          DISP_BIT_IB02
+#define DISP_BITMASK_SS21          DISP_BIT_IB01
+#define DISP_BITMASK_SS20          DISP_BIT_IB00
+/* DISP_SCREEN_3_DRV_POS_2_ADDR    Second Screen Driving Position (2) */
+#define DISP_BITMASK_SE28          DISP_BIT_IB08
+#define DISP_BITMASK_SE27          DISP_BIT_IB07
+#define DISP_BITMASK_SE26          DISP_BIT_IB06
+#define DISP_BITMASK_SE25          DISP_BIT_IB05
+#define DISP_BITMASK_SE24          DISP_BIT_IB04
+#define DISP_BITMASK_SE23          DISP_BIT_IB03
+#define DISP_BITMASK_SE22          DISP_BIT_IB02
+#define DISP_BITMASK_SE21          DISP_BIT_IB01
+#define DISP_BITMASK_SE20          DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_1_ADDR   Horizontal RAM Address Position (1) */
+#define DISP_BITMASK_HSA7          DISP_BIT_IB07
+#define DISP_BITMASK_HSA6          DISP_BIT_IB06
+#define DISP_BITMASK_HSA5          DISP_BIT_IB05
+#define DISP_BITMASK_HSA4          DISP_BIT_IB04
+#define DISP_BITMASK_HSA3          DISP_BIT_IB03
+#define DISP_BITMASK_HSA2          DISP_BIT_IB02
+#define DISP_BITMASK_HSA1          DISP_BIT_IB01
+#define DISP_BITMASK_HSA0          DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_2_ADDR   Horizontal RAM Address Position (2) */
+#define DISP_BITMASK_HEA7          DISP_BIT_IB07
+#define DISP_BITMASK_HEA6          DISP_BIT_IB06
+#define DISP_BITMASK_HEA5          DISP_BIT_IB05
+#define DISP_BITMASK_HEA4          DISP_BIT_IB04
+#define DISP_BITMASK_HEA3          DISP_BIT_IB03
+#define DISP_BITMASK_HEA2          DISP_BIT_IB02
+#define DISP_BITMASK_HEA1          DISP_BIT_IB01
+#define DISP_BITMASK_HEA0          DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_1_ADDR   Vertical RAM Address Position (1) */
+#define DISP_BITMASK_VSA8          DISP_BIT_IB08
+#define DISP_BITMASK_VSA7          DISP_BIT_IB07
+#define DISP_BITMASK_VSA6          DISP_BIT_IB06
+#define DISP_BITMASK_VSA5          DISP_BIT_IB05
+#define DISP_BITMASK_VSA4          DISP_BIT_IB04
+#define DISP_BITMASK_VSA3          DISP_BIT_IB03
+#define DISP_BITMASK_VSA2          DISP_BIT_IB02
+#define DISP_BITMASK_VSA1          DISP_BIT_IB01
+#define DISP_BITMASK_VSA0          DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_2_ADDR   Vertical RAM Address Position (2) */
+#define DISP_BITMASK_VEA8          DISP_BIT_IB08
+#define DISP_BITMASK_VEA7          DISP_BIT_IB07
+#define DISP_BITMASK_VEA6          DISP_BIT_IB06
+#define DISP_BITMASK_VEA5          DISP_BIT_IB05
+#define DISP_BITMASK_VEA4          DISP_BIT_IB04
+#define DISP_BITMASK_VEA3          DISP_BIT_IB03
+#define DISP_BITMASK_VEA2          DISP_BIT_IB02
+#define DISP_BITMASK_VEA1          DISP_BIT_IB01
+#define DISP_BITMASK_VEA0          DISP_BIT_IB00
+static word disp_area_start_row;
+static word disp_area_end_row;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+* it again
+*/
+static boolean display_on = FALSE;
+
+static uint32 tmd20qvga_lcd_rev;
+uint16 tmd20qvga_panel_offset;
+
+#ifdef DISP_DEVICE_8BPP
+static word convert_8_to_16_tbl[256] = {
+	0x0000, 0x2000, 0x4000, 0x6000, 0x8000, 0xA000, 0xC000, 0xE000,
+	0x0100, 0x2100, 0x4100, 0x6100, 0x8100, 0xA100, 0xC100, 0xE100,
+	0x0200, 0x2200, 0x4200, 0x6200, 0x8200, 0xA200, 0xC200, 0xE200,
+	0x0300, 0x2300, 0x4300, 0x6300, 0x8300, 0xA300, 0xC300, 0xE300,
+	0x0400, 0x2400, 0x4400, 0x6400, 0x8400, 0xA400, 0xC400, 0xE400,
+	0x0500, 0x2500, 0x4500, 0x6500, 0x8500, 0xA500, 0xC500, 0xE500,
+	0x0600, 0x2600, 0x4600, 0x6600, 0x8600, 0xA600, 0xC600, 0xE600,
+	0x0700, 0x2700, 0x4700, 0x6700, 0x8700, 0xA700, 0xC700, 0xE700,
+	0x0008, 0x2008, 0x4008, 0x6008, 0x8008, 0xA008, 0xC008, 0xE008,
+	0x0108, 0x2108, 0x4108, 0x6108, 0x8108, 0xA108, 0xC108, 0xE108,
+	0x0208, 0x2208, 0x4208, 0x6208, 0x8208, 0xA208, 0xC208, 0xE208,
+	0x0308, 0x2308, 0x4308, 0x6308, 0x8308, 0xA308, 0xC308, 0xE308,
+	0x0408, 0x2408, 0x4408, 0x6408, 0x8408, 0xA408, 0xC408, 0xE408,
+	0x0508, 0x2508, 0x4508, 0x6508, 0x8508, 0xA508, 0xC508, 0xE508,
+	0x0608, 0x2608, 0x4608, 0x6608, 0x8608, 0xA608, 0xC608, 0xE608,
+	0x0708, 0x2708, 0x4708, 0x6708, 0x8708, 0xA708, 0xC708, 0xE708,
+	0x0010, 0x2010, 0x4010, 0x6010, 0x8010, 0xA010, 0xC010, 0xE010,
+	0x0110, 0x2110, 0x4110, 0x6110, 0x8110, 0xA110, 0xC110, 0xE110,
+	0x0210, 0x2210, 0x4210, 0x6210, 0x8210, 0xA210, 0xC210, 0xE210,
+	0x0310, 0x2310, 0x4310, 0x6310, 0x8310, 0xA310, 0xC310, 0xE310,
+	0x0410, 0x2410, 0x4410, 0x6410, 0x8410, 0xA410, 0xC410, 0xE410,
+	0x0510, 0x2510, 0x4510, 0x6510, 0x8510, 0xA510, 0xC510, 0xE510,
+	0x0610, 0x2610, 0x4610, 0x6610, 0x8610, 0xA610, 0xC610, 0xE610,
+	0x0710, 0x2710, 0x4710, 0x6710, 0x8710, 0xA710, 0xC710, 0xE710,
+	0x0018, 0x2018, 0x4018, 0x6018, 0x8018, 0xA018, 0xC018, 0xE018,
+	0x0118, 0x2118, 0x4118, 0x6118, 0x8118, 0xA118, 0xC118, 0xE118,
+	0x0218, 0x2218, 0x4218, 0x6218, 0x8218, 0xA218, 0xC218, 0xE218,
+	0x0318, 0x2318, 0x4318, 0x6318, 0x8318, 0xA318, 0xC318, 0xE318,
+	0x0418, 0x2418, 0x4418, 0x6418, 0x8418, 0xA418, 0xC418, 0xE418,
+	0x0518, 0x2518, 0x4518, 0x6518, 0x8518, 0xA518, 0xC518, 0xE518,
+	0x0618, 0x2618, 0x4618, 0x6618, 0x8618, 0xA618, 0xC618, 0xE618,
+	0x0718, 0x2718, 0x4718, 0x6718, 0x8718, 0xA718, 0xC718, 0xE718
+};
+#endif /* DISP_DEVICE_8BPP */
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres);
+static void tmd20qvga_disp_init(struct platform_device *pdev);
+static void tmd20qvga_disp_set_contrast(void);
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row);
+static int tmd20qvga_disp_off(struct platform_device *pdev);
+static int tmd20qvga_disp_on(struct platform_device *pdev);
+static void tmd20qvga_set_revId(int);
+
+/* future use */
+void tmd20qvga_disp_clear_screen_area(word start_row, word end_row,
+				      word start_column, word end_column);
+
+static void tmd20qvga_set_revId(int id)
+{
+
+	tmd20qvga_lcd_rev = id;
+
+	if (tmd20qvga_lcd_rev == 1)
+		tmd20qvga_panel_offset = 0x10;
+	else
+		tmd20qvga_panel_offset = 0;
+}
+
+static void tmd20qvga_disp_init(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	if (disp_initialized)
+		return;
+
+	mfd = platform_get_drvdata(pdev);
+
+	DISP_CMD_PORT = mfd->cmd_port;
+	DISP_DATA_PORT = mfd->data_port;
+
+#ifdef TMD20QVGA_LCD_18BPP
+	tmd20qvga_set_revId(2);
+#else
+	tmd20qvga_set_revId(1);
+#endif
+
+	disp_initialized = TRUE;
+	tmd20qvga_disp_set_contrast();
+	tmd20qvga_disp_set_display_area(0, QVGA_HEIGHT - 1);
+}
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres)
+{
+	if (!disp_initialized)
+		return;
+
+	DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row)
+{
+	word start_driving = start_row;
+	word end_driving = end_row;
+
+	if (!disp_initialized)
+		return;
+
+	/* Range checking
+	 */
+	if (end_driving >= QVGA_HEIGHT)
+		end_driving = QVGA_HEIGHT - 1;
+	if (start_driving > end_driving) {
+		/* Probably Backwards Switch */
+		start_driving = end_driving;
+		end_driving = start_row;	/* Has not changed */
+		if (end_driving >= QVGA_HEIGHT)
+			end_driving = QVGA_HEIGHT - 1;
+	}
+
+	if ((start_driving == disp_area_start_row)
+	    && (end_driving == disp_area_end_row))
+		return;
+
+	disp_area_start_row = start_driving;
+	disp_area_end_row = end_driving;
+
+	DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR,
+		       DISP_VAL_IF(start_driving & 0x100,
+				   DISP_BITMASK_SS18) |
+		       DISP_VAL_IF(start_driving & 0x080,
+				   DISP_BITMASK_SS17) |
+		       DISP_VAL_IF(start_driving & 0x040,
+				   DISP_BITMASK_SS16) |
+		       DISP_VAL_IF(start_driving & 0x020,
+				   DISP_BITMASK_SS15) |
+		       DISP_VAL_IF(start_driving & 0x010,
+				   DISP_BITMASK_SS14) |
+		       DISP_VAL_IF(start_driving & 0x008,
+				   DISP_BITMASK_SS13) |
+		       DISP_VAL_IF(start_driving & 0x004,
+				   DISP_BITMASK_SS12) |
+		       DISP_VAL_IF(start_driving & 0x002,
+				   DISP_BITMASK_SS11) |
+		       DISP_VAL_IF(start_driving & 0x001, DISP_BITMASK_SS10));
+
+	DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR,
+			DISP_VAL_IF(end_driving & 0x100, DISP_BITMASK_SE18) |
+			DISP_VAL_IF(end_driving & 0x080, DISP_BITMASK_SE17) |
+			DISP_VAL_IF(end_driving & 0x040, DISP_BITMASK_SE16) |
+			DISP_VAL_IF(end_driving & 0x020, DISP_BITMASK_SE15) |
+			DISP_VAL_IF(end_driving & 0x010, DISP_BITMASK_SE14) |
+			DISP_VAL_IF(end_driving & 0x008, DISP_BITMASK_SE13) |
+			DISP_VAL_IF(end_driving & 0x004, DISP_BITMASK_SE12) |
+			DISP_VAL_IF(end_driving & 0x002, DISP_BITMASK_SE11) |
+			DISP_VAL_IF(end_driving & 0x001, DISP_BITMASK_SE10));
+}
+
+static int tmd20qvga_disp_off(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		tmd20qvga_disp_init(pdev);
+
+	if (display_on) {
+		if (tmd20qvga_lcd_rev == 2) {
+			DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000A);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFEE);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xF812);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xE811);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC011);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x4011);
+			WAIT_MSEC(20);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0010);
+
+		} else {
+			DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000F);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFE);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BED);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x00CD);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(20);
+			DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0);
+		}
+
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0004);
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0000);
+
+		display_on = FALSE;
+	}
+
+	return 0;
+}
+
+static int tmd20qvga_disp_on(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		tmd20qvga_disp_init(pdev);
+
+	if (!display_on) {
+		/* Deep Stand-by -> Stand-by */
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+
+		/* OFF -> Deep Stan-By -> Stand-by */
+		/* let's change the state from "Stand-by" to "Sleep" */
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0005);
+		WAIT_MSEC(1);
+
+		/* Sleep -> Displaying */
+		DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0001);
+		DISP_WRITE_OUT(DISP_DRIVER_OUTPUT_CTL_ADDR, 0x0127);
+		DISP_WRITE_OUT(DISP_LCD_DRIVING_SIG_ADDR, 0x200);
+		/* fast write mode */
+		DISP_WRITE_OUT(DISP_ENTRY_MODE_ADDR, 0x0130);
+		if (tmd20qvga_lcd_rev == 2)
+			DISP_WRITE_OUT(DISP_TMD_700_ADDR, 0x0003);
+		/* back porch = 14 + front porch = 2 --> 16 lines */
+		if (tmd20qvga_lcd_rev == 2) {
+#ifdef TMD20QVGA_LCD_18BPP
+			/* 256k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0000);
+#else
+			/* 65k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4000);
+#endif
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x0302);
+		} else {
+#ifdef TMD20QVGA_LCD_18BPP
+			/* 256k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0004);
+#else
+			/* 65k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4004);
+#endif
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x020E);
+		}
+		/* 16 bit one transfer */
+		if (tmd20qvga_lcd_rev == 2) {
+			DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0302);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0102);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_TMD_015_ADDR, 0x2000);
+
+			DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0304);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0101);
+			DISP_WRITE_OUT(DISP_TMD_305_ADDR, 0);
+
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x077D);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0005);
+			DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0015);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC010);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFFE);
+			WAIT_MSEC(60);
+		} else {
+			DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0301);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0507);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0405);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0607);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0502);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0301);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+			DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x0795);
+
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0102);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0450);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0103);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0008);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0104);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0C00);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0105);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_7_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0106);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0801);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x001F);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+			WAIT_MSEC(60);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x009F);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+			WAIT_MSEC(10);
+
+			DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, 0x00FF);
+			DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, 0x013F);
+			/* RAM starts at address 0x10 */
+			DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, 0x0000);
+
+			/* lcd controller uses internal clock, not ext. vsync */
+			DISP_CMD_OUT(DISP_CMD_RAMWR);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0881);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BE1);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFF);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+		}
+		display_on = TRUE;
+	}
+
+	return 0;
+}
+
+static void tmd20qvga_disp_set_contrast(void)
+{
+#if (defined(TMD20QVGA_LCD_18BPP))
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0302);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#else
+	int newcontrast = 0x46;
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR,
+			DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP20) |
+			DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP21) |
+			DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP22) |
+			DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP30) |
+			DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP31) |
+			DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP32));
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR,
+			DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP40) |
+			DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP41) |
+			DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP42) |
+			DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP50) |
+			DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP51) |
+			DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP52));
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#endif /* defined(TMD20QVGA_LCD_18BPP) */
+
+}	/* End disp_set_contrast */
+
+void tmd20qvga_disp_clear_screen_area
+    (word start_row, word end_row, word start_column, word end_column) {
+	int32 i;
+
+	/* Clear the display screen */
+	DISP_SET_RECT(start_row, end_row, start_column, end_column);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	i = (end_row - start_row + 1) * (end_column - start_column + 1);
+	for (; i > 0; i--)
+		DISP_DATA_OUT_16TO18BPP(0x0);
+}
+
+static int __init tmd20qvga_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = tmd20qvga_probe,
+	.driver = {
+		.name   = "ebi2_tmd_qvga",
+	},
+};
+
+static struct msm_fb_panel_data tmd20qvga_panel_data = {
+	.on = tmd20qvga_disp_on,
+	.off = tmd20qvga_disp_off,
+	.set_rect = tmd20qvga_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+	.name   = "ebi2_tmd_qvga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &tmd20qvga_panel_data,
+	}
+};
+
+static int __init tmd20qvga_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &tmd20qvga_panel_data.panel_info;
+		pinfo->xres = 240;
+		pinfo->yres = 320;
+		pinfo->type = EBI2_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->wait_cycle = 0x808000;
+#ifdef TMD20QVGA_LCD_18BPP
+		pinfo->bpp = 18;
+#else
+		pinfo->bpp = 16;
+#endif
+		pinfo->fb_num = 2;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 = 6000;
+		pinfo->lcd.v_back_porch = 16;
+		pinfo->lcd.v_front_porch = 4;
+		pinfo->lcd.v_pulse_width = 0;
+		pinfo->lcd.hw_vsync_mode = FALSE;
+		pinfo->lcd.vsync_notifier_period = 0;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(tmd20qvga_init);
diff --git a/drivers/staging/msm/hdmi_sii9022.c b/drivers/staging/msm/hdmi_sii9022.c
new file mode 100644
index 00000000000..6b82b56a77b
--- /dev/null
+++ b/drivers/staging/msm/hdmi_sii9022.c
@@ -0,0 +1,248 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID   0xB0
+
+struct sii9022_i2c_addr_data{
+	u8 addr;
+	u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+	0x00,
+	0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+	0x09,
+	0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+	{ 0x60, 0x04 },
+	{ 0x63, 0x00 },
+	{ 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+	0x0C,
+	0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+	0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+	{ 0x26, 0x90 },
+	{ 0x20, 0x90 },
+	{ 0x1F, 0x80 },
+	{ 0x26, 0x80 },
+	{ 0x24, 0x02 },
+	{ 0x25, 0x0B },
+	{ 0xBC, 0x02 },
+	{ 0xBD, 0x24 },
+	{ 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+	0xBF,
+	0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+	{ 0x1A, 0x01 },
+	{ 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+			 struct sii9022_i2c_addr_data *regset,
+			 int size)
+{
+	int i;
+	int rc = 0;
+
+	for (i = 0; i < size; i++) {
+		rc = i2c_smbus_write_byte_data(
+			client,
+			regset[i].addr, regset[i].data);
+		if (rc)
+			break;
+	}
+	return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+	int rc;
+	int retries = 10;
+	int count;
+
+	rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+	if (rc)
+		goto enable_exit;
+
+	do {
+		msleep(1);
+		rc = i2c_smbus_read_byte_data(client, 0x1B);
+	} while ((rc != SII9022_DEVICE_ID) && retries--);
+
+	if (rc != SII9022_DEVICE_ID)
+		return -ENODEV;
+
+	rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_mode_data);
+	rc = i2c_master_send(client, video_mode_data, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+	if (rc)
+		goto enable_exit;
+	count = ARRAY_SIZE(avi_io_format);
+	rc = i2c_master_send(client, avi_io_format, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_infoframe);
+	rc = i2c_master_send(client, video_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(misc_infoframe);
+	rc = i2c_master_send(client, misc_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+	if (rc)
+		goto enable_exit;
+
+	return 0;
+enable_exit:
+	printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+	{ DEVICE_NAME, 0 },
+	{ }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -ENODEV;
+	rc = hdmi_sii_enable(client);
+	return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = hdmi_sii_probe,
+	.remove =  __exit_p(hdmi_sii_remove),
+	.id_table = hmdi_sii_id,
+};
+
+static int __init hdmi_sii_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("hdmi_sii9022"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = HDMI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;
+	pinfo.lcdc.underflow_clr = 0xff;
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device\n", __func__);
+		goto init_exit;
+	}
+
+	ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+	return ret;
+}
+
+static void __exit hdmi_sii_exit(void)
+{
+	i2c_del_driver(&hdmi_sii_i2c_driver);
+}
+
+module_init(hdmi_sii_init);
+module_exit(hdmi_sii_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+MODULE_AUTHOR("Qualcomm Innovation Center, Inc.");
+MODULE_DESCRIPTION("SiI9022 HDMI driver");
+MODULE_ALIAS("platform:hdmi-sii9022");
diff --git a/drivers/staging/msm/lcdc.c b/drivers/staging/msm/lcdc.c
new file mode 100644
index 00000000000..735280ab72c
--- /dev/null
+++ b/drivers/staging/msm/lcdc.c
@@ -0,0 +1,239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#include "msm_fb.h"
+
+static int lcdc_probe(struct platform_device *pdev);
+static int lcdc_remove(struct platform_device *pdev);
+
+static int lcdc_off(struct platform_device *pdev);
+static int lcdc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *mdp_lcdc_pclk_clk;
+static struct clk *mdp_lcdc_pad_pclk_clk;
+
+int mdp_lcdc_pclk_clk_rate;
+int mdp_lcdc_pad_pclk_clk_rate;
+
+static struct platform_driver lcdc_driver = {
+	.probe = lcdc_probe,
+	.remove = lcdc_remove,
+	.suspend = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "lcdc",
+		   },
+};
+
+static struct lcdc_platform_data *lcdc_pdata;
+
+static int lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	clk_disable(mdp_lcdc_pclk_clk);
+	clk_disable(mdp_lcdc_pad_pclk_clk);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+		lcdc_pdata->lcdc_power_save(0);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+		ret = lcdc_pdata->lcdc_gpio_config(0);
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//					PM_QOS_DEFAULT_VALUE);
+
+	return ret;
+}
+
+static int lcdc_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+	unsigned long panel_pixclock_freq , pm_qos_freq;
+
+	mfd = platform_get_drvdata(pdev);
+	panel_pixclock_freq = mfd->fbi->var.pixclock;
+
+	if (panel_pixclock_freq > 58000000)
+		/* pm_qos_freq should be in Khz */
+		pm_qos_freq = panel_pixclock_freq / 1000 ;
+	else
+		pm_qos_freq = 58000;
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//						pm_qos_freq);
+	mfd = platform_get_drvdata(pdev);
+
+	clk_enable(mdp_lcdc_pclk_clk);
+	clk_enable(mdp_lcdc_pad_pclk_clk);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+		lcdc_pdata->lcdc_power_save(1);
+	if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+		ret = lcdc_pdata->lcdc_gpio_config(1);
+
+	clk_set_rate(mdp_lcdc_pclk_clk, mfd->fbi->var.pixclock);
+	clk_set_rate(mdp_lcdc_pad_pclk_clk, mfd->fbi->var.pixclock);
+	mdp_lcdc_pclk_clk_rate = clk_get_rate(mdp_lcdc_pclk_clk);
+	mdp_lcdc_pad_pclk_clk_rate = clk_get_rate(mdp_lcdc_pad_pclk_clk);
+
+	ret = panel_next_on(pdev);
+	return ret;
+}
+
+static int lcdc_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct fb_info *fbi;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+
+	if (pdev->id == 0) {
+		lcdc_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCDC;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "lcdc_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = (struct msm_fb_panel_data *)mdp_dev->dev.platform_data;
+	pdata->on = lcdc_on;
+	pdata->off = lcdc_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	fbi = mfd->fbi;
+	fbi->var.pixclock = mfd->panel_info.clk_rate;
+	fbi->var.left_margin = mfd->panel_info.lcdc.h_back_porch;
+	fbi->var.right_margin = mfd->panel_info.lcdc.h_front_porch;
+	fbi->var.upper_margin = mfd->panel_info.lcdc.v_back_porch;
+	fbi->var.lower_margin = mfd->panel_info.lcdc.v_front_porch;
+	fbi->var.hsync_len = mfd->panel_info.lcdc.h_pulse_width;
+	fbi->var.vsync_len = mfd->panel_info.lcdc.v_pulse_width;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto lcdc_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+		return 0;
+
+lcdc_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int lcdc_remove(struct platform_device *pdev)
+{
+//	pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc");
+	return 0;
+}
+
+static int lcdc_register_driver(void)
+{
+	return platform_driver_register(&lcdc_driver);
+}
+
+static int __init lcdc_driver_init(void)
+{
+	mdp_lcdc_pclk_clk = clk_get(NULL, "mdp_lcdc_pclk_clk");
+	if (IS_ERR(mdp_lcdc_pclk_clk)) {
+		printk(KERN_ERR "error: can't get mdp_lcdc_pclk_clk!\n");
+		return IS_ERR(mdp_lcdc_pclk_clk);
+	}
+	mdp_lcdc_pad_pclk_clk = clk_get(NULL, "mdp_lcdc_pad_pclk_clk");
+	if (IS_ERR(mdp_lcdc_pad_pclk_clk)) {
+		printk(KERN_ERR "error: can't get mdp_lcdc_pad_pclk_clk!\n");
+		return IS_ERR(mdp_lcdc_pad_pclk_clk);
+	}
+//	pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//				PM_QOS_DEFAULT_VALUE);
+	return lcdc_register_driver();
+}
+
+module_init(lcdc_driver_init);
diff --git a/drivers/staging/msm/lcdc_external.c b/drivers/staging/msm/lcdc_external.c
new file mode 100644
index 00000000000..45ff7852711
--- /dev/null
+++ b/drivers/staging/msm/lcdc_external.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_external_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_external"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_external_init);
diff --git a/drivers/staging/msm/lcdc_gordon.c b/drivers/staging/msm/lcdc_gordon.c
new file mode 100644
index 00000000000..399ec8c791e
--- /dev/null
+++ b/drivers/staging/msm/lcdc_gordon.c
@@ -0,0 +1,446 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+/* registers */
+#define GORDON_REG_NOP          0x00
+#define GORDON_REG_IMGCTL1      0x10
+#define GORDON_REG_IMGCTL2      0x11
+#define GORDON_REG_IMGSET1      0x12
+#define GORDON_REG_IMGSET2      0x13
+#define GORDON_REG_IVBP1        0x14
+#define GORDON_REG_IHBP1        0x15
+#define GORDON_REG_IVNUM1       0x16
+#define GORDON_REG_IHNUM1       0x17
+#define GORDON_REG_IVBP2        0x18
+#define GORDON_REG_IHBP2        0x19
+#define GORDON_REG_IVNUM2       0x1A
+#define GORDON_REG_IHNUM2       0x1B
+#define GORDON_REG_LCDIFCTL1    0x30
+#define GORDON_REG_VALTRAN      0x31
+#define GORDON_REG_AVCTL        0x33
+#define GORDON_REG_LCDIFCTL2    0x34
+#define GORDON_REG_LCDIFCTL3    0x35
+#define GORDON_REG_LCDIFSET1    0x36
+#define GORDON_REG_PCCTL        0x3C
+#define GORDON_REG_TPARAM1      0x40
+#define GORDON_REG_TLCDIF1      0x41
+#define GORDON_REG_TSSPB_ST1    0x42
+#define GORDON_REG_TSSPB_ED1    0x43
+#define GORDON_REG_TSCK_ST1     0x44
+#define GORDON_REG_TSCK_WD1     0x45
+#define GORDON_REG_TGSPB_VST1   0x46
+#define GORDON_REG_TGSPB_VED1   0x47
+#define GORDON_REG_TGSPB_CH1    0x48
+#define GORDON_REG_TGCK_ST1     0x49
+#define GORDON_REG_TGCK_ED1     0x4A
+#define GORDON_REG_TPCTL_ST1    0x4B
+#define GORDON_REG_TPCTL_ED1    0x4C
+#define GORDON_REG_TPCHG_ED1    0x4D
+#define GORDON_REG_TCOM_CH1     0x4E
+#define GORDON_REG_THBP1        0x4F
+#define GORDON_REG_TPHCTL1      0x50
+#define GORDON_REG_EVPH1        0x51
+#define GORDON_REG_EVPL1        0x52
+#define GORDON_REG_EVNH1        0x53
+#define GORDON_REG_EVNL1        0x54
+#define GORDON_REG_TBIAS1       0x55
+#define GORDON_REG_TPARAM2      0x56
+#define GORDON_REG_TLCDIF2      0x57
+#define GORDON_REG_TSSPB_ST2    0x58
+#define GORDON_REG_TSSPB_ED2    0x59
+#define GORDON_REG_TSCK_ST2     0x5A
+#define GORDON_REG_TSCK_WD2     0x5B
+#define GORDON_REG_TGSPB_VST2   0x5C
+#define GORDON_REG_TGSPB_VED2   0x5D
+#define GORDON_REG_TGSPB_CH2    0x5E
+#define GORDON_REG_TGCK_ST2     0x5F
+#define GORDON_REG_TGCK_ED2     0x60
+#define GORDON_REG_TPCTL_ST2    0x61
+#define GORDON_REG_TPCTL_ED2    0x62
+#define GORDON_REG_TPCHG_ED2    0x63
+#define GORDON_REG_TCOM_CH2     0x64
+#define GORDON_REG_THBP2        0x65
+#define GORDON_REG_TPHCTL2      0x66
+#define GORDON_REG_POWCTL       0x80
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_sdo;
+static int spi_sdi;
+static int spi_dac;
+static unsigned char bit_shift[8] = { (1 << 7),	/* MSB */
+	(1 << 6),
+	(1 << 5),
+	(1 << 4),
+	(1 << 3),
+	(1 << 2),
+	(1 << 1),
+	(1 << 0)		               /* LSB */
+};
+
+struct gordon_state_type{
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+static struct gordon_state_type gordon_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_gordon_pdata;
+
+static void serigo(uint16 reg, uint8 data)
+{
+	unsigned int tx_val = ((0x00FF & reg) << 8) | data;
+	unsigned char i, val = 0;
+
+	/* Enable the Chip Select */
+	gpio_set_value(spi_cs, 1);
+	udelay(33);
+
+	/* Transmit it in two parts, Higher Byte first, then Lower Byte */
+	val = (unsigned char)((tx_val & 0xFF00) >> 8);
+
+	/* Clock should be Low before entering ! */
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_sdi, 1);
+		else
+			gpio_set_value(spi_sdi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		udelay(33);
+		gpio_set_value(spi_sclk, 1);
+		udelay(33);
+		gpio_set_value(spi_sclk, 0);
+	}
+
+	/* Idle state of SDO (MOSI) is Low */
+	gpio_set_value(spi_sdi, 0);
+	/* ..then Lower Byte */
+	val = (uint8) (tx_val & 0x00FF);
+	/* Before we enter here the Clock should be Low ! */
+
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_sdi, 1);
+		else
+			gpio_set_value(spi_sdi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		udelay(33);
+
+		gpio_set_value(spi_sclk, 1);
+		udelay(33);
+		gpio_set_value(spi_sclk, 0);
+	}
+
+	/* Idle state of SDO (MOSI) is Low */
+	gpio_set_value(spi_sdi, 0);
+
+	/* Now Disable the Chip Select */
+	udelay(33);
+	gpio_set_value(spi_cs, 0);
+}
+
+static void spi_init(void)
+{
+	/* Setting the Default GPIO's */
+	spi_sclk = *(lcdc_gordon_pdata->gpio_num);
+	spi_cs   = *(lcdc_gordon_pdata->gpio_num + 1);
+	spi_sdi  = *(lcdc_gordon_pdata->gpio_num + 2);
+	spi_sdo  = *(lcdc_gordon_pdata->gpio_num + 3);
+
+	/* Set the output so that we dont disturb the slave device */
+	gpio_set_value(spi_sclk, 0);
+	gpio_set_value(spi_sdi, 0);
+
+	/* Set the Chip Select De-asserted */
+	gpio_set_value(spi_cs, 0);
+
+}
+
+static void gordon_disp_powerup(void)
+{
+	if (!gordon_state.disp_powered_up && !gordon_state.display_on) {
+		/* Reset the hardware first */
+		/* Include DAC power up implementation here */
+	      gordon_state.disp_powered_up = TRUE;
+	}
+}
+
+static void gordon_init(void)
+{
+	/* Image interface settings */
+	serigo(GORDON_REG_IMGCTL2, 0x00);
+	serigo(GORDON_REG_IMGSET1, 0x00);
+
+	/* Exchange the RGB signal for J510(Softbank mobile) */
+	serigo(GORDON_REG_IMGSET2, 0x12);
+	serigo(GORDON_REG_LCDIFSET1, 0x00);
+
+	/* Pre-charge settings */
+	serigo(GORDON_REG_PCCTL, 0x09);
+	serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+
+	mdelay(1);
+}
+
+static void gordon_disp_on(void)
+{
+	if (gordon_state.disp_powered_up && !gordon_state.display_on) {
+		gordon_init();
+		mdelay(20);
+		/* gordon_dispmode setting */
+		serigo(GORDON_REG_TPARAM1, 0x30);
+		serigo(GORDON_REG_TLCDIF1, 0x00);
+		serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+		serigo(GORDON_REG_TSSPB_ED1, 0x93);
+		serigo(GORDON_REG_TSCK_ST1, 0x88);
+		serigo(GORDON_REG_TSCK_WD1, 0x00);
+		serigo(GORDON_REG_TGSPB_VST1, 0x01);
+		serigo(GORDON_REG_TGSPB_VED1, 0x02);
+		serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+		serigo(GORDON_REG_TGCK_ST1, 0x80);
+		serigo(GORDON_REG_TGCK_ED1, 0x3C);
+		serigo(GORDON_REG_TPCTL_ST1, 0x50);
+		serigo(GORDON_REG_TPCTL_ED1, 0x74);
+		serigo(GORDON_REG_TPCHG_ED1, 0x78);
+		serigo(GORDON_REG_TCOM_CH1, 0x50);
+		serigo(GORDON_REG_THBP1, 0x84);
+		serigo(GORDON_REG_TPHCTL1, 0x00);
+		serigo(GORDON_REG_EVPH1, 0x70);
+		serigo(GORDON_REG_EVPL1, 0x64);
+		serigo(GORDON_REG_EVNH1, 0x56);
+		serigo(GORDON_REG_EVNL1, 0x48);
+		serigo(GORDON_REG_TBIAS1, 0x88);
+
+		/* QVGA settings */
+		serigo(GORDON_REG_TPARAM2, 0x28);
+		serigo(GORDON_REG_TLCDIF2, 0x14);
+		serigo(GORDON_REG_TSSPB_ST2, 0x49);
+		serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+		serigo(GORDON_REG_TSCK_ST2, 0x4A);
+		serigo(GORDON_REG_TSCK_WD2, 0x02);
+		serigo(GORDON_REG_TGSPB_VST2, 0x02);
+		serigo(GORDON_REG_TGSPB_VED2, 0x03);
+		serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+		serigo(GORDON_REG_TGCK_ST2, 0x40);
+		serigo(GORDON_REG_TGCK_ED2, 0x1E);
+		serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+		serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+		serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+		serigo(GORDON_REG_TCOM_CH2, 0x28);
+		serigo(GORDON_REG_THBP2, 0x4D);
+		serigo(GORDON_REG_TPHCTL2, 0x1A);
+
+		/* VGA settings */
+		serigo(GORDON_REG_IVBP1, 0x02);
+		serigo(GORDON_REG_IHBP1, 0x90);
+		serigo(GORDON_REG_IVNUM1, 0xA0);
+		serigo(GORDON_REG_IHNUM1, 0x78);
+
+		/* QVGA settings */
+		serigo(GORDON_REG_IVBP2, 0x02);
+		serigo(GORDON_REG_IHBP2, 0x48);
+		serigo(GORDON_REG_IVNUM2, 0x50);
+		serigo(GORDON_REG_IHNUM2, 0x3C);
+
+		/* Gordon Charge pump settings and ON */
+		serigo(GORDON_REG_POWCTL, 0x03);
+		mdelay(15);
+		serigo(GORDON_REG_POWCTL, 0x07);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x0F);
+		mdelay(15);
+
+		serigo(GORDON_REG_AVCTL, 0x03);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x1F);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x5F);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x7F);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL1, 0x02);
+		mdelay(15);
+
+		serigo(GORDON_REG_IMGCTL1, 0x00);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL3, 0x00);
+		mdelay(15);
+
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL1, 0x03);
+		mdelay(1);
+		gordon_state.display_on = TRUE;
+	}
+}
+
+static int lcdc_gordon_panel_on(struct platform_device *pdev)
+{
+	if (!gordon_state.disp_initialized) {
+		/* Configure reset GPIO that drives DAC */
+		lcdc_gordon_pdata->panel_config_gpio(1);
+		spi_dac = *(lcdc_gordon_pdata->gpio_num + 4);
+		gpio_set_value(spi_dac, 0);
+		udelay(15);
+		gpio_set_value(spi_dac, 1);
+		spi_init();	/* LCD needs SPI */
+		gordon_disp_powerup();
+		gordon_disp_on();
+		gordon_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev)
+{
+	if (gordon_state.disp_powered_up && gordon_state.display_on) {
+		serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		serigo(GORDON_REG_LCDIFCTL1, 0x02);
+		serigo(GORDON_REG_LCDIFCTL3, 0x01);
+		mdelay(20);
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		serigo(GORDON_REG_IMGCTL1, 0x01);
+		serigo(GORDON_REG_LCDIFCTL1, 0x00);
+		mdelay(20);
+
+		serigo(GORDON_REG_POWCTL, 0x1F);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x07);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x03);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x00);
+		mdelay(40);
+		lcdc_gordon_pdata->panel_config_gpio(0);
+		gordon_state.display_on = FALSE;
+		gordon_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static void lcdc_gordon_set_backlight(struct msm_fb_data_type *mfd)
+{
+		int bl_level = mfd->bl_level;
+
+		if (bl_level <= 1) {
+			/* keep back light OFF */
+			serigo(GORDON_REG_LCDIFCTL2, 0x0B);
+			udelay(15);
+			serigo(GORDON_REG_VALTRAN, 0x01);
+		} else {
+			/* keep back light ON */
+			serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+			udelay(15);
+			serigo(GORDON_REG_VALTRAN, 0x01);
+		}
+}
+
+static int __init gordon_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_gordon_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = gordon_probe,
+	.driver = {
+		.name   = "lcdc_gordon_vga",
+	},
+};
+
+static struct msm_fb_panel_data gordon_panel_data = {
+	.on = lcdc_gordon_panel_on,
+	.off = lcdc_gordon_panel_off,
+	.set_backlight = lcdc_gordon_set_backlight,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_gordon_vga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &gordon_panel_data,
+	}
+};
+
+static int __init lcdc_gordon_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (msm_fb_detect_client("lcdc_gordon_vga"))
+		return 0;
+#endif
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &gordon_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 640;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 24;
+	pinfo->fb_num = 2;
+	pinfo->clk_rate = 24500000;
+	pinfo->bl_max = 4;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 84;
+	pinfo->lcdc.h_front_porch = 33;
+	pinfo->lcdc.h_pulse_width = 60;
+	pinfo->lcdc.v_back_porch = 0;
+	pinfo->lcdc.v_front_porch = 2;
+	pinfo->lcdc.v_pulse_width = 2;
+	pinfo->lcdc.border_clr = 0;     /* blk */
+	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+module_init(lcdc_gordon_panel_init);
diff --git a/drivers/staging/msm/lcdc_grapefruit.c b/drivers/staging/msm/lcdc_grapefruit.c
new file mode 100644
index 00000000000..7284649ea0a
--- /dev/null
+++ b/drivers/staging/msm/lcdc_grapefruit.c
@@ -0,0 +1,60 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_grapefruit_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (msm_fb_detect_client("lcdc_grapefruit_vga"))
+		return 0;
+#endif
+
+	pinfo.xres = 1024;
+	pinfo.yres = 600;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 40000000;
+
+	pinfo.lcdc.h_back_porch = 88;
+	pinfo.lcdc.h_front_porch = 40;
+	pinfo.lcdc.h_pulse_width = 128;
+	pinfo.lcdc.v_back_porch = 23;
+	pinfo.lcdc.v_front_porch = 1;
+	pinfo.lcdc.v_pulse_width = 4;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_grapefruit_init);
diff --git a/drivers/staging/msm/lcdc_panel.c b/drivers/staging/msm/lcdc_panel.c
new file mode 100644
index 00000000000..b40974e1f27
--- /dev/null
+++ b/drivers/staging/msm/lcdc_panel.c
@@ -0,0 +1,88 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int lcdc_panel_on(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int lcdc_panel_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init lcdc_panel_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = lcdc_panel_probe,
+	.driver = {
+		.name   = "lcdc_panel",
+	},
+};
+
+static struct msm_fb_panel_data lcdc_panel_data = {
+	.on = lcdc_panel_on,
+	.off = lcdc_panel_off,
+};
+
+static int lcdc_dev_id;
+
+int lcdc_device_register(struct msm_panel_info *pinfo)
+{
+	struct platform_device *pdev = NULL;
+	int ret;
+
+	pdev = platform_device_alloc("lcdc_panel", ++lcdc_dev_id);
+	if (!pdev)
+		return -ENOMEM;
+
+	lcdc_panel_data.panel_info = *pinfo;
+	ret = platform_device_add_data(pdev, &lcdc_panel_data,
+		sizeof(lcdc_panel_data));
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_add_data failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_register failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	return 0;
+
+err_device_put:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int __init lcdc_panel_init(void)
+{
+	return platform_driver_register(&this_driver);
+}
+
+module_init(lcdc_panel_init);
diff --git a/drivers/staging/msm/lcdc_prism.c b/drivers/staging/msm/lcdc_prism.c
new file mode 100644
index 00000000000..d102c98447c
--- /dev/null
+++ b/drivers/staging/msm/lcdc_prism.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_prism_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	ret = msm_fb_detect_client("lcdc_prism_wvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret && (mddi_get_client_id() != 0))
+		return 0;
+#endif
+
+	pinfo.xres = 800;
+	pinfo.yres = 480;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 38460000;
+
+	pinfo.lcdc.h_back_porch = 21;
+	pinfo.lcdc.h_front_porch = 81;
+	pinfo.lcdc.h_pulse_width = 60;
+	pinfo.lcdc.v_back_porch = 18;
+	pinfo.lcdc.v_front_porch = 27;
+	pinfo.lcdc.v_pulse_width = 2;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_prism_init);
diff --git a/drivers/staging/msm/lcdc_sharp_wvga_pt.c b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
new file mode 100644
index 00000000000..1f08cf9bc21
--- /dev/null
+++ b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
@@ -0,0 +1,290 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#ifdef CONFIG_ARCH_MSM7X30
+#include <linux/mfd/pmic8058.h>
+#endif
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+static unsigned char bit_shift[8] = { (1 << 7),	/* MSB */
+	(1 << 6),
+	(1 << 5),
+	(1 << 4),
+	(1 << 3),
+	(1 << 2),
+	(1 << 1),
+	(1 << 0)		               /* LSB */
+};
+
+struct sharp_state_type {
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+struct sharp_spi_data {
+	u8 addr;
+	u8 data;
+};
+
+static struct sharp_spi_data init_sequence[] = {
+	{  15, 0x01 },
+	{   5, 0x01 },
+	{   7, 0x10 },
+	{   9, 0x1E },
+	{  10, 0x04 },
+	{  17, 0xFF },
+	{  21, 0x8A },
+	{  22, 0x00 },
+	{  23, 0x82 },
+	{  24, 0x24 },
+	{  25, 0x22 },
+	{  26, 0x6D },
+	{  27, 0xEB },
+	{  28, 0xB9 },
+	{  29, 0x3A },
+	{  49, 0x1A },
+	{  50, 0x16 },
+	{  51, 0x05 },
+	{  55, 0x7F },
+	{  56, 0x15 },
+	{  57, 0x7B },
+	{  60, 0x05 },
+	{  61, 0x0C },
+	{  62, 0x80 },
+	{  63, 0x00 },
+	{  92, 0x90 },
+	{  97, 0x01 },
+	{  98, 0xFF },
+	{ 113, 0x11 },
+	{ 114, 0x02 },
+	{ 115, 0x08 },
+	{ 123, 0xAB },
+	{ 124, 0x04 },
+	{   6, 0x02 },
+	{ 133, 0x00 },
+	{ 134, 0xFE },
+	{ 135, 0x22 },
+	{ 136, 0x0B },
+	{ 137, 0xFF },
+	{ 138, 0x0F },
+	{ 139, 0x00 },
+	{ 140, 0xFE },
+	{ 141, 0x22 },
+	{ 142, 0x0B },
+	{ 143, 0xFF },
+	{ 144, 0x0F },
+	{ 145, 0x00 },
+	{ 146, 0xFE },
+	{ 147, 0x22 },
+	{ 148, 0x0B },
+	{ 149, 0xFF },
+	{ 150, 0x0F },
+	{ 202, 0x30 },
+	{  30, 0x01 },
+	{   4, 0x01 },
+	{  31, 0x41 },
+};
+
+static struct sharp_state_type sharp_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_sharp_pdata;
+
+static void sharp_spi_write_byte(u8 val)
+{
+	int i;
+
+	/* Clock should be Low before entering */
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_mosi, 1);
+		else
+			gpio_set_value(spi_mosi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		gpio_set_value(spi_sclk, 1);
+		gpio_set_value(spi_sclk, 0);
+	}
+}
+
+static void serigo(u8 reg, u8 data)
+{
+	/* Enable the Chip Select - low */
+	gpio_set_value(spi_cs, 0);
+	udelay(1);
+
+	/* Transmit register address first, then data */
+	sharp_spi_write_byte(reg);
+
+	/* Idle state of MOSI is Low */
+	gpio_set_value(spi_mosi, 0);
+	udelay(1);
+	sharp_spi_write_byte(data);
+
+	gpio_set_value(spi_mosi, 0);
+	gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_spi_init(void)
+{
+	spi_sclk = *(lcdc_sharp_pdata->gpio_num);
+	spi_cs   = *(lcdc_sharp_pdata->gpio_num + 1);
+	spi_mosi = *(lcdc_sharp_pdata->gpio_num + 2);
+	spi_miso = *(lcdc_sharp_pdata->gpio_num + 3);
+
+	/* Set the output so that we don't disturb the slave device */
+	gpio_set_value(spi_sclk, 0);
+	gpio_set_value(spi_mosi, 0);
+
+	/* Set the Chip Select deasserted (active low) */
+	gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_disp_powerup(void)
+{
+	if (!sharp_state.disp_powered_up && !sharp_state.display_on)
+		sharp_state.disp_powered_up = TRUE;
+}
+
+static void sharp_disp_on(void)
+{
+	int i;
+
+	if (sharp_state.disp_powered_up && !sharp_state.display_on) {
+		for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+			serigo(init_sequence[i].addr,
+			       init_sequence[i].data);
+		}
+		mdelay(10);
+		serigo(31, 0xC1);
+		mdelay(10);
+		serigo(31, 0xD9);
+		serigo(31, 0xDF);
+
+		sharp_state.display_on = TRUE;
+	}
+}
+
+static int lcdc_sharp_panel_on(struct platform_device *pdev)
+{
+	if (!sharp_state.disp_initialized) {
+		lcdc_sharp_pdata->panel_config_gpio(1);
+		sharp_spi_init();
+		sharp_disp_powerup();
+		sharp_disp_on();
+		sharp_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev)
+{
+	if (sharp_state.disp_powered_up && sharp_state.display_on) {
+		serigo(4, 0x00);
+		mdelay(40);
+		serigo(31, 0xC1);
+		mdelay(40);
+		serigo(31, 0x00);
+		mdelay(100);
+		sharp_state.display_on = FALSE;
+		sharp_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static int __init sharp_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_sharp_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = sharp_probe,
+	.driver = {
+		.name   = "lcdc_sharp_wvga",
+	},
+};
+
+static struct msm_fb_panel_data sharp_panel_data = {
+	.on = lcdc_sharp_panel_on,
+	.off = lcdc_sharp_panel_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_sharp_wvga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &sharp_panel_data,
+	}
+};
+
+static int __init lcdc_sharp_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("lcdc_sharp_wvga_pt"))
+		return 0;
+#endif
+
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &sharp_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 800;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 18;
+	pinfo->fb_num = 2;
+	pinfo->clk_rate = 24500000;
+	pinfo->bl_max = 4;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 20;
+	pinfo->lcdc.h_front_porch = 10;
+	pinfo->lcdc.h_pulse_width = 10;
+	pinfo->lcdc.v_back_porch = 2;
+	pinfo->lcdc.v_front_porch = 2;
+	pinfo->lcdc.v_pulse_width = 2;
+	pinfo->lcdc.border_clr = 0;
+	pinfo->lcdc.underflow_clr = 0xff;
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+module_init(lcdc_sharp_panel_init);
diff --git a/drivers/staging/msm/lcdc_st15.c b/drivers/staging/msm/lcdc_st15.c
new file mode 100644
index 00000000000..fed8278eb15
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st15.c
@@ -0,0 +1,237 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID   0xB0
+
+struct sii9022_i2c_addr_data{
+	u8 addr;
+	u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+	0x00,
+	0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+	0x09,
+	0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+	{ 0x60, 0x04 },
+	{ 0x63, 0x00 },
+	{ 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+	0x0C,
+	0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+	0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+	{ 0x26, 0x90 },
+	{ 0x20, 0x90 },
+	{ 0x1F, 0x80 },
+	{ 0x26, 0x80 },
+	{ 0x24, 0x02 },
+	{ 0x25, 0x0B },
+	{ 0xBC, 0x02 },
+	{ 0xBD, 0x24 },
+	{ 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+	0xBF,
+	0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+	{ 0x1A, 0x01 },
+	{ 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+			 struct sii9022_i2c_addr_data *regset,
+			 int size)
+{
+	int i;
+	int rc = 0;
+
+	for (i = 0; i < size; i++) {
+		rc = i2c_smbus_write_byte_data(
+			client,
+			regset[i].addr, regset[i].data);
+		if (rc)
+			break;
+	}
+	return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+	int rc;
+	int retries = 10;
+	int count;
+
+	rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+	if (rc)
+		goto enable_exit;
+
+	do {
+		msleep(1);
+		rc = i2c_smbus_read_byte_data(client, 0x1B);
+	} while ((rc != SII9022_DEVICE_ID) && retries--);
+
+	if (rc != SII9022_DEVICE_ID)
+		return -ENODEV;
+
+	rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_mode_data);
+	rc = i2c_master_send(client, video_mode_data, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+	if (rc)
+		goto enable_exit;
+	count = ARRAY_SIZE(avi_io_format);
+	rc = i2c_master_send(client, avi_io_format, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_infoframe);
+	rc = i2c_master_send(client, video_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(misc_infoframe);
+	rc = i2c_master_send(client, misc_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+	if (rc)
+		goto enable_exit;
+
+	return 0;
+enable_exit:
+	printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+	{ DEVICE_NAME, 0 },
+	{ }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -ENODEV;
+	rc = hdmi_sii_enable(client);
+	return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = hdmi_sii_probe,
+	.remove =  __exit_p(hdmi_sii_remove),
+	.id_table = hmdi_sii_id,
+};
+
+static int __init lcdc_st15_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_st15"))
+		return 0;
+
+	pinfo.xres = 1366;
+	pinfo.yres = 768;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 120;
+	pinfo.lcdc.h_front_porch = 20;
+	pinfo.lcdc.h_pulse_width = 40;
+	pinfo.lcdc.v_back_porch = 25;
+	pinfo.lcdc.v_front_porch = 1;
+	pinfo.lcdc.v_pulse_width = 7;
+	pinfo.lcdc.border_clr = 0;      /* blk */
+	pinfo.lcdc.underflow_clr = 0xff;        /* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		goto init_exit;
+	}
+
+	ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+	return ret;
+}
+
+module_init(lcdc_st15_init);
diff --git a/drivers/staging/msm/lcdc_st1_wxga.c b/drivers/staging/msm/lcdc_st1_wxga.c
new file mode 100644
index 00000000000..73760019cf2
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st1_wxga.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_st1_wxga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_st1_wxga"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_st1_wxga_init);
diff --git a/drivers/staging/msm/lcdc_toshiba_wvga_pt.c b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
new file mode 100644
index 00000000000..864d7c18913
--- /dev/null
+++ b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
@@ -0,0 +1,374 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <mach/gpio.h>
+#include <mach/pmic.h>
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+
+struct toshiba_state_type{
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+static struct toshiba_state_type toshiba_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_toshiba_pdata;
+
+static void toshiba_spi_write_byte(char dc, uint8 data)
+{
+	uint32 bit;
+	int bnum;
+
+	gpio_set_value(spi_sclk, 0); /* clk low */
+	/* dc: 0 for command, 1 for parameter */
+	gpio_set_value(spi_mosi, dc);
+	udelay(1);	/* at least 20 ns */
+	gpio_set_value(spi_sclk, 1); /* clk high */
+	udelay(1);	/* at least 20 ns */
+	bnum = 8;	/* 8 data bits */
+	bit = 0x80;
+	while (bnum) {
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		if (data & bit)
+			gpio_set_value(spi_mosi, 1);
+		else
+			gpio_set_value(spi_mosi, 0);
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+		udelay(1);
+		bit >>= 1;
+		bnum--;
+	}
+}
+
+static void toshiba_spi_write(char cmd, uint32 data, int num)
+{
+	char *bp;
+
+	gpio_set_value(spi_cs, 1);	/* cs high */
+
+	/* command byte first */
+	toshiba_spi_write_byte(0, cmd);
+
+	/* followed by parameter bytes */
+	if (num) {
+		bp = (char *)&data;;
+		bp += (num - 1);
+		while (num) {
+			toshiba_spi_write_byte(1, *bp);
+			num--;
+			bp--;
+		}
+	}
+
+	gpio_set_value(spi_cs, 0);	/* cs low */
+	udelay(1);
+}
+
+void toshiba_spi_read_bytes(char cmd, uint32 *data, int num)
+{
+	uint32 dbit, bits;
+	int bnum;
+
+	gpio_set_value(spi_cs, 1);	/* cs high */
+
+	/* command byte first */
+	toshiba_spi_write_byte(0, cmd);
+
+	if (num > 1) {
+		/* extra dc bit */
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		udelay(1);
+		dbit = gpio_get_value(spi_miso);/* dc bit */
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+	}
+
+	/* followed by data bytes */
+	bnum = num * 8;	/* number of bits */
+	bits = 0;
+	while (bnum) {
+		bits <<= 1;
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		udelay(1);
+		dbit = gpio_get_value(spi_miso);
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+		bits |= dbit;
+		bnum--;
+	}
+
+	*data = bits;
+
+	udelay(1);
+	gpio_set_value(spi_cs, 0);	/* cs low */
+	udelay(1);
+}
+
+static void spi_pin_assign(void)
+{
+	/* Setting the Default GPIO's */
+	spi_sclk = *(lcdc_toshiba_pdata->gpio_num);
+	spi_cs   = *(lcdc_toshiba_pdata->gpio_num + 1);
+	spi_mosi  = *(lcdc_toshiba_pdata->gpio_num + 2);
+	spi_miso  = *(lcdc_toshiba_pdata->gpio_num + 3);
+}
+
+static void toshiba_disp_powerup(void)
+{
+	if (!toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+		/* Reset the hardware first */
+		/* Include DAC power up implementation here */
+	      toshiba_state.disp_powered_up = TRUE;
+	}
+}
+
+static void toshiba_disp_on(void)
+{
+	uint32	data;
+
+	gpio_set_value(spi_cs, 0);	/* low */
+	gpio_set_value(spi_sclk, 1);	/* high */
+	gpio_set_value(spi_mosi, 0);
+	gpio_set_value(spi_miso, 0);
+
+	if (toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0xba, 0x11, 1);
+		toshiba_spi_write(0x36, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0x3a, 0x60, 1);
+		toshiba_spi_write(0xb1, 0x5d, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb2, 0x33, 1);
+		toshiba_spi_write(0xb3, 0x22, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb4, 0x02, 1);
+		toshiba_spi_write(0xb5, 0x1e, 1); /* vcs -- adjust brightness */
+		mdelay(1);
+		toshiba_spi_write(0xb6, 0x27, 1);
+		toshiba_spi_write(0xb7, 0x03, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb9, 0x24, 1);
+		toshiba_spi_write(0xbd, 0xa1, 1);
+		mdelay(1);
+		toshiba_spi_write(0xbb, 0x00, 1);
+		toshiba_spi_write(0xbf, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xbe, 0x00, 1);
+		toshiba_spi_write(0xc0, 0x11, 1);
+		mdelay(1);
+		toshiba_spi_write(0xc1, 0x11, 1);
+		toshiba_spi_write(0xc2, 0x11, 1);
+		mdelay(1);
+		toshiba_spi_write(0xc3, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc4, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc5, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc6, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc7, 0x6445, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc8, 0x44, 1);
+		toshiba_spi_write(0xc9, 0x52, 1);
+		mdelay(1);
+		toshiba_spi_write(0xca, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0xec, 0x02a4, 2);	/* 0x02a4 */
+		mdelay(1);
+		toshiba_spi_write(0xcf, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xd0, 0xc003, 2);	/* c003 */
+		mdelay(1);
+		toshiba_spi_write(0xd1, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xd2, 0x0028, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd3, 0x0028, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd4, 0x26a4, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd5, 0x20, 1);
+		mdelay(1);
+		toshiba_spi_write(0xef, 0x3200, 2);
+		mdelay(32);
+		toshiba_spi_write(0xbc, 0x80, 1);	/* wvga pass through */
+		toshiba_spi_write(0x3b, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb0, 0x16, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb8, 0xfff5, 2);
+		mdelay(1);
+		toshiba_spi_write(0x11, 0, 0);
+		mdelay(5);
+		toshiba_spi_write(0x29, 0, 0);
+		mdelay(5);
+		toshiba_state.display_on = TRUE;
+	}
+
+	data = 0;
+	toshiba_spi_read_bytes(0x04, &data, 3);
+	printk(KERN_INFO "toshiba_disp_on: id=%x\n", data);
+
+}
+
+static int lcdc_toshiba_panel_on(struct platform_device *pdev)
+{
+	if (!toshiba_state.disp_initialized) {
+		/* Configure reset GPIO that drives DAC */
+		if (lcdc_toshiba_pdata->panel_config_gpio)
+			lcdc_toshiba_pdata->panel_config_gpio(1);
+		toshiba_disp_powerup();
+		toshiba_disp_on();
+		toshiba_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_toshiba_panel_off(struct platform_device *pdev)
+{
+	if (toshiba_state.disp_powered_up && toshiba_state.display_on) {
+		/* Main panel power off (Deep standby in) */
+
+		toshiba_spi_write(0x28, 0, 0);	/* display off */
+		mdelay(1);
+		toshiba_spi_write(0xb8, 0x8002, 2);	/* output control */
+		mdelay(1);
+		toshiba_spi_write(0x10, 0x00, 1);	/* sleep mode in */
+		mdelay(85);		/* wait 85 msec */
+		toshiba_spi_write(0xb0, 0x00, 1);	/* deep standby in */
+		mdelay(1);
+		if (lcdc_toshiba_pdata->panel_config_gpio)
+			lcdc_toshiba_pdata->panel_config_gpio(0);
+		toshiba_state.display_on = FALSE;
+		toshiba_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static void lcdc_toshiba_set_backlight(struct msm_fb_data_type *mfd)
+{
+	int bl_level;
+	int ret = -EPERM;
+
+	bl_level = mfd->bl_level;
+	ret = pmic_set_led_intensity(LED_LCD, bl_level);
+
+	if (ret)
+		printk(KERN_WARNING "%s: can't set lcd backlight!\n",
+				__func__);
+}
+
+static int __init toshiba_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_toshiba_pdata = pdev->dev.platform_data;
+		spi_pin_assign();
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = toshiba_probe,
+	.driver = {
+		.name   = "lcdc_toshiba_wvga",
+	},
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+	.on = lcdc_toshiba_panel_on,
+	.off = lcdc_toshiba_panel_off,
+	.set_backlight = lcdc_toshiba_set_backlight,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_toshiba_wvga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &toshiba_panel_data,
+	}
+};
+
+static int __init lcdc_toshiba_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (mddi_get_client_id() != 0)
+		return 0;
+
+	ret = msm_fb_detect_client("lcdc_toshiba_wvga_pt");
+	if (ret)
+		return 0;
+
+#endif
+
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &toshiba_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 800;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 18;
+	pinfo->fb_num = 2;
+	/* 30Mhz mdp_lcdc_pclk and mdp_lcdc_pad_pcl */
+	pinfo->clk_rate = 27648000;
+	pinfo->bl_max = 15;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 184;	/* hsw = 8 + hbp=184 */
+	pinfo->lcdc.h_front_porch = 4;
+	pinfo->lcdc.h_pulse_width = 8;
+	pinfo->lcdc.v_back_porch = 2;	/* vsw=1 + vbp = 2 */
+	pinfo->lcdc.v_front_porch = 3;
+	pinfo->lcdc.v_pulse_width = 1;
+	pinfo->lcdc.border_clr = 0;     /* blk */
+	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+device_initcall(lcdc_toshiba_panel_init);
diff --git a/drivers/staging/msm/lcdc_wxga.c b/drivers/staging/msm/lcdc_wxga.c
new file mode 100644
index 00000000000..202c92c0ef5
--- /dev/null
+++ b/drivers/staging/msm/lcdc_wxga.c
@@ -0,0 +1,56 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_wxga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("lcdc_wxga"))
+		return 0;
+#endif
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_wxga_init);
diff --git a/drivers/staging/msm/logo.c b/drivers/staging/msm/logo.c
new file mode 100644
index 00000000000..7272765f48c
--- /dev/null
+++ b/drivers/staging/msm/logo.c
@@ -0,0 +1,98 @@
+/* drivers/video/msm/logo.c
+ *
+ * Show Logo in RLE 565 format
+ *
+ * Copyright (C) 2008 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/vt_kern.h>
+#include <linux/unistd.h>
+#include <linux/syscalls.h>
+
+#include <linux/irq.h>
+#include <asm/system.h>
+
+#define fb_width(fb)	((fb)->var.xres)
+#define fb_height(fb)	((fb)->var.yres)
+#define fb_size(fb)	((fb)->var.xres * (fb)->var.yres * 2)
+
+static void memset16(void *_ptr, unsigned short val, unsigned count)
+{
+	unsigned short *ptr = _ptr;
+	count >>= 1;
+	while (count--)
+		*ptr++ = val;
+}
+
+/* 565RLE image format: [count(2 bytes), rle(2 bytes)] */
+int load_565rle_image(char *filename)
+{
+	struct fb_info *info;
+	int fd, err = 0;
+	unsigned count, max;
+	unsigned short *data, *bits, *ptr;
+
+	info = registered_fb[0];
+	if (!info) {
+		printk(KERN_WARNING "%s: Can not access framebuffer\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	fd = sys_open(filename, O_RDONLY, 0);
+	if (fd < 0) {
+		printk(KERN_WARNING "%s: Can not open %s\n",
+			__func__, filename);
+		return -ENOENT;
+	}
+	count = (unsigned)sys_lseek(fd, (off_t)0, 2);
+	if (count == 0) {
+		sys_close(fd);
+		err = -EIO;
+		goto err_logo_close_file;
+	}
+	sys_lseek(fd, (off_t)0, 0);
+	data = kmalloc(count, GFP_KERNEL);
+	if (!data) {
+		printk(KERN_WARNING "%s: Can not alloc data\n", __func__);
+		err = -ENOMEM;
+		goto err_logo_close_file;
+	}
+	if ((unsigned)sys_read(fd, (char *)data, count) != count) {
+		err = -EIO;
+		goto err_logo_free_data;
+	}
+
+	max = fb_width(info) * fb_height(info);
+	ptr = data;
+	bits = (unsigned short *)(info->screen_base);
+	while (count > 3) {
+		unsigned n = ptr[0];
+		if (n > max)
+			break;
+		memset16(bits, ptr[1], n << 1);
+		bits += n;
+		max -= n;
+		ptr += 2;
+		count -= 4;
+	}
+
+err_logo_free_data:
+	kfree(data);
+err_logo_close_file:
+	sys_close(fd);
+	return err;
+}
+EXPORT_SYMBOL(load_565rle_image);
diff --git a/drivers/staging/msm/mddi.c b/drivers/staging/msm/mddi.c
new file mode 100644
index 00000000000..132eb1adff1
--- /dev/null
+++ b/drivers/staging/msm/mddi.c
@@ -0,0 +1,375 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "mddihost.h"
+#include <mach/gpio.h>
+#include <mach/clk.h>
+
+static int mddi_probe(struct platform_device *pdev);
+static int mddi_remove(struct platform_device *pdev);
+
+static int mddi_off(struct platform_device *pdev);
+static int mddi_on(struct platform_device *pdev);
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h);
+static void mddi_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static struct clk *mddi_clk;
+static struct clk *mddi_pclk;
+static struct mddi_platform_data *mddi_pdata;
+
+static struct platform_driver mddi_driver = {
+	.probe = mddi_probe,
+	.remove = mddi_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+	.suspend = mddi_suspend,
+	.resume = mddi_resume,
+#endif
+#endif
+	.suspend_late = NULL,
+	.resume_early = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "mddi",
+		   },
+};
+
+extern int int_mddi_pri_flag;
+
+static int mddi_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(0);
+
+	return ret;
+}
+
+static int mddi_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	u32 clk_rate;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(1);
+
+	clk_rate = mfd->fbi->var.pixclock;
+	clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+	if (mddi_pdata &&
+	    mddi_pdata->mddi_sel_clk &&
+	    mddi_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_min_rate(mddi_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+			__func__);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mddi_resource_initialized;
+
+static int mddi_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t size ;
+	u32 clk_rate;
+
+	if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+		mddi_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_pmdh_base =  ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("primary mddi base phy_addr = 0x%x virt = 0x%x\n",
+				pdev->resource[0].start, (int) msm_pmdh_base);
+
+		if (unlikely(!msm_pmdh_base))
+			return -ENOMEM;
+
+		if (mddi_pdata && mddi_pdata->mddi_power_save)
+			mddi_pdata->mddi_power_save(1);
+
+		mddi_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mddi_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCD;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mddi_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = mddi_on;
+	pdata->off = mddi_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	clk_rate = mfd->panel_info.clk_max;
+	if (mddi_pdata &&
+	    mddi_pdata->mddi_sel_clk &&
+	    mddi_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_max_rate(mddi_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+	mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto mddi_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->mddi_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+	mfd->mddi_early_suspend.suspend = mddi_early_suspend;
+	mfd->mddi_early_suspend.resume = mddi_early_resume;
+	register_early_suspend(&mfd->mddi_early_suspend);
+#endif
+
+	return 0;
+
+mddi_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int mddi_pad_ctrl;
+static int mddi_power_locked;
+static int mddi_is_in_suspend;
+
+void mddi_disable(int lock)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+	if (mddi_power_locked)
+		return;
+
+	if (lock)
+		mddi_power_locked = 1;
+
+	if (mddi_host_timer.function)
+		del_timer_sync(&mddi_host_timer);
+
+	mddi_pad_ctrl = mddi_host_reg_in(PAD_CTL);
+	mddi_host_reg_out(PAD_CTL, 0x0);
+
+	if (clk_set_min_rate(mddi_clk, 0) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+	clk_disable(mddi_clk);
+	if (mddi_pclk)
+		clk_disable(mddi_pclk);
+	disable_irq(INT_MDDI_PRI);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(0);
+}
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (mddi_is_in_suspend)
+		return 0;
+
+	mddi_is_in_suspend = 1;
+	mddi_disable(0);
+	return 0;
+}
+
+static int mddi_resume(struct platform_device *pdev)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+	if (!mddi_is_in_suspend)
+		return 0;
+
+	mddi_is_in_suspend = 0;
+
+	if (mddi_power_locked)
+		return 0;
+
+	enable_irq(INT_MDDI_PRI);
+	clk_enable(mddi_clk);
+	if (mddi_pclk)
+		clk_enable(mddi_pclk);
+	mddi_host_reg_out(PAD_CTL, mddi_pad_ctrl);
+
+	if (mddi_host_timer.function)
+		mddi_host_timer_service(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h)
+{
+	pm_message_t state;
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_early_suspend);
+
+	state.event = PM_EVENT_SUSPEND;
+	mddi_suspend(mfd->pdev, state);
+}
+
+static void mddi_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_early_suspend);
+	mddi_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_remove(struct platform_device *pdev)
+{
+	if (mddi_host_timer.function)
+		del_timer_sync(&mddi_host_timer);
+
+	iounmap(msm_pmdh_base);
+
+	return 0;
+}
+
+static int mddi_register_driver(void)
+{
+	return platform_driver_register(&mddi_driver);
+}
+
+static int __init mddi_driver_init(void)
+{
+	int ret;
+
+	mddi_clk = clk_get(NULL, "mddi_clk");
+	if (IS_ERR(mddi_clk)) {
+		printk(KERN_ERR "can't find mddi_clk \n");
+		return PTR_ERR(mddi_clk);
+	}
+	clk_enable(mddi_clk);
+
+	mddi_pclk = clk_get(NULL, "mddi_pclk");
+	if (IS_ERR(mddi_pclk))
+		mddi_pclk = NULL;
+	else
+		clk_enable(mddi_pclk);
+
+	ret = mddi_register_driver();
+	if (ret) {
+		clk_disable(mddi_clk);
+		clk_put(mddi_clk);
+		if (mddi_pclk) {
+			clk_disable(mddi_pclk);
+			clk_put(mddi_pclk);
+		}
+		printk(KERN_ERR "mddi_register_driver() failed!\n");
+		return ret;
+	}
+
+	mddi_init();
+
+	return ret;
+}
+
+module_init(mddi_driver_init);
diff --git a/drivers/staging/msm/mddi_ext.c b/drivers/staging/msm/mddi_ext.c
new file mode 100644
index 00000000000..c0c168c7199
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext.c
@@ -0,0 +1,320 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <mach/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+
+static int mddi_ext_probe(struct platform_device *pdev);
+static int mddi_ext_remove(struct platform_device *pdev);
+
+static int mddi_ext_off(struct platform_device *pdev);
+static int mddi_ext_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_ext_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h);
+static void mddi_ext_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_driver mddi_ext_driver = {
+	.probe = mddi_ext_probe,
+	.remove = mddi_ext_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+	.suspend = mddi_ext_suspend,
+	.resume = mddi_ext_resume,
+#endif
+#endif
+	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "mddi_ext",
+		   },
+};
+
+static struct clk *mddi_ext_clk;
+static struct mddi_platform_data *mddi_ext_pdata;
+
+extern int int_mddi_ext_flag;
+
+static int mddi_ext_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+	mddi_host_stop_ext_display();
+
+	return ret;
+}
+
+static int mddi_ext_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	u32 clk_rate;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	clk_rate = mfd->fbi->var.pixclock;
+	clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+	if (mddi_ext_pdata &&
+	    mddi_ext_pdata->mddi_sel_clk &&
+	    mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+		printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_min_rate(mddi_ext_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+			__func__);
+
+	mddi_host_start_ext_display();
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mddi_ext_resource_initialized;
+
+static int mddi_ext_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t size ;
+	u32 clk_rate;
+
+	if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+		mddi_ext_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_emdh_base = ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("external mddi base address = 0x%x\n",
+				pdev->resource[0].start);
+
+		if (unlikely(!msm_emdh_base))
+			return -ENOMEM;
+
+		mddi_ext_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mddi_ext_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_EXT_MDDI;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mddi_ext_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = mddi_ext_on;
+	pdata->off = mddi_ext_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	clk_rate = mfd->panel_info.clk_max;
+	if (mddi_ext_pdata &&
+	    mddi_ext_pdata->mddi_sel_clk &&
+	    mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_max_rate(mddi_ext_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+	mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto mddi_ext_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->mddi_ext_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+	mfd->mddi_ext_early_suspend.suspend = mddi_ext_early_suspend;
+	mfd->mddi_ext_early_suspend.resume = mddi_ext_early_resume;
+	register_early_suspend(&mfd->mddi_ext_early_suspend);
+#endif
+
+	return 0;
+
+mddi_ext_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int mddi_ext_is_in_suspend;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (mddi_ext_is_in_suspend)
+		return 0;
+
+	mddi_ext_is_in_suspend = 1;
+
+	if (clk_set_min_rate(mddi_ext_clk, 0) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+	clk_disable(mddi_ext_clk);
+	disable_irq(INT_MDDI_EXT);
+
+	return 0;
+}
+
+static int mddi_ext_resume(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mddi_ext_is_in_suspend)
+		return 0;
+
+	mddi_ext_is_in_suspend = 0;
+	enable_irq(INT_MDDI_EXT);
+
+	clk_enable(mddi_ext_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h)
+{
+	pm_message_t state;
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_ext_early_suspend);
+
+	state.event = PM_EVENT_SUSPEND;
+	mddi_ext_suspend(mfd->pdev, state);
+}
+
+static void mddi_ext_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_ext_early_suspend);
+	mddi_ext_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_ext_remove(struct platform_device *pdev)
+{
+	iounmap(msm_emdh_base);
+	return 0;
+}
+
+static int mddi_ext_register_driver(void)
+{
+	return platform_driver_register(&mddi_ext_driver);
+}
+
+static int __init mddi_ext_driver_init(void)
+{
+	int ret;
+
+	mddi_ext_clk = clk_get(NULL, "emdh_clk");
+	if (IS_ERR(mddi_ext_clk)) {
+		printk(KERN_ERR "can't find emdh_clk\n");
+		return PTR_ERR(mddi_ext_clk);
+	}
+	clk_enable(mddi_ext_clk);
+
+	ret = mddi_ext_register_driver();
+	if (ret) {
+		clk_disable(mddi_ext_clk);
+		clk_put(mddi_ext_clk);
+		printk(KERN_ERR "mddi_ext_register_driver() failed!\n");
+		return ret;
+	}
+	mddi_init();
+
+	return ret;
+}
+
+module_init(mddi_ext_driver_init);
diff --git a/drivers/staging/msm/mddi_ext_lcd.c b/drivers/staging/msm/mddi_ext_lcd.c
new file mode 100644
index 00000000000..502e80d17ec
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext_lcd.c
@@ -0,0 +1,91 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int mddi_ext_lcd_on(struct platform_device *pdev);
+static int mddi_ext_lcd_off(struct platform_device *pdev);
+
+static int mddi_ext_lcd_on(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int mddi_ext_lcd_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init mddi_ext_lcd_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_ext_lcd_probe,
+	.driver = {
+		.name   = "extmddi_svga",
+	},
+};
+
+static struct msm_fb_panel_data mddi_ext_lcd_panel_data = {
+	.panel_info.xres = 800,
+	.panel_info.yres = 600,
+	.panel_info.type = EXT_MDDI_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 18,
+	.panel_info.fb_num = 2,
+	.panel_info.clk_rate = 122880000,
+	.panel_info.clk_min  = 120000000,
+	.panel_info.clk_max  = 125000000,
+	.on = mddi_ext_lcd_on,
+	.off = mddi_ext_lcd_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "extmddi_svga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &mddi_ext_lcd_panel_data,
+	}
+};
+
+static int __init mddi_ext_lcd_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &mddi_ext_lcd_panel_data.panel_info;
+		pinfo->lcd.vsync_enable = FALSE;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(mddi_ext_lcd_init);
diff --git a/drivers/staging/msm/mddi_prism.c b/drivers/staging/msm/mddi_prism.c
new file mode 100644
index 00000000000..489d40405a5
--- /dev/null
+++ b/drivers/staging/msm/mddi_prism.c
@@ -0,0 +1,114 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int prism_lcd_on(struct platform_device *pdev);
+static int prism_lcd_off(struct platform_device *pdev);
+
+static int prism_lcd_on(struct platform_device *pdev)
+{
+	/* Set the MDP pixel data attributes for Primary Display */
+	mddi_host_write_pix_attr_reg(0x00C3);
+
+	return 0;
+}
+
+static int prism_lcd_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init prism_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = prism_probe,
+	.driver = {
+		.name   = "mddi_prism_wvga",
+	},
+};
+
+static struct msm_fb_panel_data prism_panel_data = {
+	.on = prism_lcd_on,
+	.off = prism_lcd_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "mddi_prism_wvga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &prism_panel_data,
+	}
+};
+
+static int __init prism_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_prism_wvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+
+		if (((id >> 16) != 0x4474) || ((id & 0xffff) == 0x8960))
+			return 0;
+	}
+#endif
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &prism_panel_data.panel_info;
+		pinfo->xres = 800;
+		pinfo->yres = 480;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->fb_num = 2;
+		pinfo->clk_rate = 153600000;
+		pinfo->clk_min = 150000000;
+		pinfo->clk_max = 160000000;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 = 6050;
+		pinfo->lcd.v_back_porch = 23;
+		pinfo->lcd.v_front_porch = 20;
+		pinfo->lcd.v_pulse_width = 105;
+		pinfo->lcd.hw_vsync_mode = TRUE;
+		pinfo->lcd.vsync_notifier_period = 0;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(prism_init);
diff --git a/drivers/staging/msm/mddi_sharp.c b/drivers/staging/msm/mddi_sharp.c
new file mode 100644
index 00000000000..1da1be4052d
--- /dev/null
+++ b/drivers/staging/msm/mddi_sharp.c
@@ -0,0 +1,892 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define SHARP_QVGA_PRIM 1
+#define SHARP_128X128_SECD 2
+
+extern uint32 mddi_host_core_version;
+static boolean mddi_debug_prim_wait = FALSE;
+static boolean mddi_sharp_vsync_wake = TRUE;
+static boolean mddi_sharp_monitor_refresh_value = TRUE;
+static boolean mddi_sharp_report_refresh_measurements = FALSE;
+static uint32 mddi_sharp_rows_per_second = 13830;	/* 5200000/376 */
+static uint32 mddi_sharp_rows_per_refresh = 338;
+static uint32 mddi_sharp_usecs_per_refresh = 24440;	/* (376+338)/5200000 */
+static boolean mddi_sharp_debug_60hz_refresh = FALSE;
+
+extern mddi_gpio_info_type mddi_gpio;
+extern boolean mddi_vsync_detect_enabled;
+static msm_fb_vsync_handler_type mddi_sharp_vsync_handler;
+static void *mddi_sharp_vsync_handler_arg;
+static uint16 mddi_sharp_vsync_attempts;
+
+static void mddi_sharp_prim_lcd_init(void);
+static void mddi_sharp_sub_lcd_init(void);
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd);
+static void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler,
+					 void *);
+static void mddi_sharp_lcd_vsync_detected(boolean detected);
+static struct msm_panel_common_pdata *mddi_sharp_pdata;
+
+#define REG_SYSCTL    0x0000
+#define REG_INTR    0x0006
+#define REG_CLKCNF    0x000C
+#define REG_CLKDIV1    0x000E
+#define REG_CLKDIV2    0x0010
+
+#define REG_GIOD    0x0040
+#define REG_GIOA    0x0042
+
+#define REG_AGM      0x010A
+#define REG_FLFT    0x0110
+#define REG_FRGT    0x0112
+#define REG_FTOP    0x0114
+#define REG_FBTM    0x0116
+#define REG_FSTRX    0x0118
+#define REG_FSTRY    0x011A
+#define REG_VRAM    0x0202
+#define REG_SSDCTL    0x0330
+#define REG_SSD0    0x0332
+#define REG_PSTCTL1    0x0400
+#define REG_PSTCTL2    0x0402
+#define REG_PTGCTL    0x042A
+#define REG_PTHP    0x042C
+#define REG_PTHB    0x042E
+#define REG_PTHW    0x0430
+#define REG_PTHF    0x0432
+#define REG_PTVP    0x0434
+#define REG_PTVB    0x0436
+#define REG_PTVW    0x0438
+#define REG_PTVF    0x043A
+#define REG_VBLKS    0x0458
+#define REG_VBLKE    0x045A
+#define REG_SUBCTL    0x0700
+#define REG_SUBTCMD    0x0702
+#define REG_SUBTCMDD  0x0704
+#define REG_REVBYTE    0x0A02
+#define REG_REVCNT    0x0A04
+#define REG_REVATTR    0x0A06
+#define REG_REVFMT    0x0A08
+
+#define SHARP_SUB_UNKNOWN 0xffffffff
+#define SHARP_SUB_HYNIX 1
+#define SHARP_SUB_ROHM  2
+
+static uint32 sharp_subpanel_type = SHARP_SUB_UNKNOWN;
+
+static void sub_through_write(int sub_rs, uint32 sub_data)
+{
+	mddi_queue_register_write(REG_SUBTCMDD, sub_data, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=0,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0004 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+}
+
+static uint32 sub_through_read(int sub_rs)
+{
+	uint32 sub_data;
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=0,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0002 | sub_rs, TRUE, 0);
+
+	mddi_queue_register_read(REG_SUBTCMDD, &sub_data, TRUE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+
+	return sub_data;
+}
+
+static void serigo(uint32 ssd)
+{
+	uint32 ssdctl;
+
+	mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+	ssdctl = ((ssdctl & 0xE7) | 0x02);
+
+	mddi_queue_register_write(REG_SSD0, ssd, FALSE, 0);
+	mddi_queue_register_write(REG_SSDCTL, ssdctl, TRUE, 0);
+
+	do {
+		mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+	} while ((ssdctl & 0x0002) != 0);
+
+	if (mddi_debug_prim_wait)
+		mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_powerdown(void)
+{
+	serigo(0x0131);
+	serigo(0x0300);
+	mddi_wait(40);
+	serigo(0x0135);
+	mddi_wait(20);
+	serigo(0x2122);
+	mddi_wait(20);
+	serigo(0x0201);
+	mddi_wait(20);
+	serigo(0x2100);
+	mddi_wait(20);
+	serigo(0x2000);
+	mddi_wait(20);
+
+	mddi_queue_register_write(REG_PSTCTL1, 0x1, TRUE, 0);
+	mddi_wait(100);
+	mddi_queue_register_write(REG_PSTCTL1, 0x0, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_SYSCTL, 0x1, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_CLKDIV1, 0x3, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_SSDCTL, 0x0000, TRUE, 0);	/* SSDRESET */
+	mddi_queue_register_write(REG_SYSCTL, 0x0, TRUE, 0);
+	mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+	uint32 regdata;
+	int32 level;
+	int max = mfd->panel_info.bl_max;
+	int min = mfd->panel_info.bl_min;
+
+	if (mddi_sharp_pdata && mddi_sharp_pdata->backlight_level) {
+		level = mddi_sharp_pdata->backlight_level(mfd->bl_level,
+							  max,
+							  min);
+
+		if (level < 0)
+			return;
+
+		/* use Rodem GPIO(2:0) to give 8 levels of backlight (7-0) */
+		/* Set lower 3 GPIOs as Outputs (set to 0) */
+		mddi_queue_register_read(REG_GIOA, &regdata, TRUE, 0);
+		mddi_queue_register_write(REG_GIOA, regdata & 0xfff8, TRUE, 0);
+
+		/* Set lower 3 GPIOs as level */
+		mddi_queue_register_read(REG_GIOD, &regdata, TRUE, 0);
+		mddi_queue_register_write(REG_GIOD,
+			  (regdata & 0xfff8) | (0x07 & level), TRUE, 0);
+	}
+}
+
+static void mddi_sharp_prim_lcd_init(void)
+{
+	mddi_queue_register_write(REG_SYSCTL, 0x4000, TRUE, 0);
+	mddi_wait(1);
+	mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+	mddi_wait(5);
+	mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+	mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+
+	/* new reg write below */
+	if (mddi_sharp_debug_60hz_refresh)
+		mddi_queue_register_write(REG_CLKCNF, 0x070d, FALSE, 0);
+	else
+		mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+
+	mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+	mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+	mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+	mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+	mddi_queue_register_write(REG_PTHW, 240, FALSE, 0);
+	if (mddi_sharp_debug_60hz_refresh)
+		mddi_queue_register_write(REG_PTHF, 12, FALSE, 0);
+	else
+		mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+
+	mddi_wait(1);
+
+	mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+	mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+	mddi_queue_register_write(REG_PTVW, 320, FALSE, 0);
+	mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+	mddi_wait(1);
+
+	/* vram_color set REG_AGM???? */
+	mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+	mddi_queue_register_write(REG_SSDCTL, 0x0000, FALSE, 0);
+	mddi_queue_register_write(REG_SSDCTL, 0x0001, TRUE, 0);
+	mddi_wait(1);
+	mddi_queue_register_write(REG_PSTCTL1, 0x0001, TRUE, 0);
+	mddi_wait(10);
+
+	serigo(0x0701);
+	/* software reset */
+	mddi_wait(1);
+	/* Wait over 50us */
+
+	serigo(0x0400);
+	/* DCLK~ACHSYNC~ACVSYNC polarity setting */
+	serigo(0x2900);
+	/* EEPROM start read address setting */
+	serigo(0x2606);
+	/* EEPROM start read register setting */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x0503);
+	/* Horizontal timing setting */
+	serigo(0x062C);
+	/* Veritical timing setting */
+	serigo(0x2001);
+	/* power initialize setting(VDC2) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2120);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2130);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2132);
+	/* Initialize power setting(CPS) */
+	mddi_wait(10);
+	/* Wait over 10ms */
+
+	serigo(0x2133);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x0200);
+	/* Panel initialize release(INIT) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	serigo(0x0131);
+	/* Panel setting(CPS) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	mddi_queue_register_write(REG_PSTCTL1, 0x0003, TRUE, 0);
+
+	/* if (FFA LCD is upside down) -> serigo(0x0100); */
+	serigo(0x0130);
+
+	/* Black mask release(display ON) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	if (mddi_sharp_vsync_wake) {
+		mddi_queue_register_write(REG_VBLKS, 0x1001, TRUE, 0);
+		mddi_queue_register_write(REG_VBLKE, 0x1002, TRUE, 0);
+	}
+
+	/* Set the MDP pixel data attributes for Primary Display */
+	mddi_host_write_pix_attr_reg(0x00C3);
+	return;
+
+}
+
+void mddi_sharp_sub_lcd_init(void)
+{
+
+	mddi_queue_register_write(REG_SYSCTL, 0x4000, FALSE, 0);
+	mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+	mddi_wait(100);
+
+	mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+	mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+	mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+	mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+	mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+	mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+	mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+	mddi_queue_register_write(REG_PTHW, 128, FALSE, 0);
+	mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+	mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+	mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+	mddi_queue_register_write(REG_PTVW, 128, FALSE, 0);
+	mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+	/* Now the sub display..... */
+	/* Reset High */
+	mddi_queue_register_write(REG_SUBCTL, 0x0200, FALSE, 0);
+	/* CS=1,RD=1,WE=1,RS=1 */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000f, TRUE, 0);
+	mddi_wait(1);
+	/* Wait 5us */
+
+	if (sharp_subpanel_type == SHARP_SUB_UNKNOWN) {
+		uint32 data;
+
+		sub_through_write(1, 0x05);
+		sub_through_write(1, 0x6A);
+		sub_through_write(1, 0x1D);
+		sub_through_write(1, 0x05);
+		data = sub_through_read(1);
+		if (data == 0x6A) {
+			sharp_subpanel_type = SHARP_SUB_HYNIX;
+		} else {
+			sub_through_write(0, 0x36);
+			sub_through_write(1, 0xA8);
+			sub_through_write(0, 0x09);
+			data = sub_through_read(1);
+			data = sub_through_read(1);
+			if (data == 0x54) {
+				sub_through_write(0, 0x36);
+				sub_through_write(1, 0x00);
+				sharp_subpanel_type = SHARP_SUB_ROHM;
+			}
+		}
+	}
+
+	if (sharp_subpanel_type == SHARP_SUB_HYNIX) {
+		sub_through_write(1, 0x00);	/* Display setting 1 */
+		sub_through_write(1, 0x04);
+		sub_through_write(1, 0x01);
+		sub_through_write(1, 0x05);
+		sub_through_write(1, 0x0280);
+		sub_through_write(1, 0x0301);
+		sub_through_write(1, 0x0402);
+		sub_through_write(1, 0x0500);
+		sub_through_write(1, 0x0681);
+		sub_through_write(1, 0x077F);
+		sub_through_write(1, 0x08C0);
+		sub_through_write(1, 0x0905);
+		sub_through_write(1, 0x0A02);
+		sub_through_write(1, 0x0B00);
+		sub_through_write(1, 0x0C00);
+		sub_through_write(1, 0x0D00);
+		sub_through_write(1, 0x0E00);
+		sub_through_write(1, 0x0F00);
+
+		sub_through_write(1, 0x100B);	/* Display setting 2 */
+		sub_through_write(1, 0x1103);
+		sub_through_write(1, 0x1237);
+		sub_through_write(1, 0x1300);
+		sub_through_write(1, 0x1400);
+		sub_through_write(1, 0x1500);
+		sub_through_write(1, 0x1605);
+		sub_through_write(1, 0x1700);
+		sub_through_write(1, 0x1800);
+		sub_through_write(1, 0x192E);
+		sub_through_write(1, 0x1A00);
+		sub_through_write(1, 0x1B00);
+		sub_through_write(1, 0x1C00);
+
+		sub_through_write(1, 0x151A);	/* Power setting */
+
+		sub_through_write(1, 0x2002);	/* Gradation Palette setting */
+		sub_through_write(1, 0x2107);
+		sub_through_write(1, 0x220C);
+		sub_through_write(1, 0x2310);
+		sub_through_write(1, 0x2414);
+		sub_through_write(1, 0x2518);
+		sub_through_write(1, 0x261C);
+		sub_through_write(1, 0x2720);
+		sub_through_write(1, 0x2824);
+		sub_through_write(1, 0x2928);
+		sub_through_write(1, 0x2A2B);
+		sub_through_write(1, 0x2B2E);
+		sub_through_write(1, 0x2C31);
+		sub_through_write(1, 0x2D34);
+		sub_through_write(1, 0x2E37);
+		sub_through_write(1, 0x2F3A);
+		sub_through_write(1, 0x303C);
+		sub_through_write(1, 0x313E);
+		sub_through_write(1, 0x323F);
+		sub_through_write(1, 0x3340);
+		sub_through_write(1, 0x3441);
+		sub_through_write(1, 0x3543);
+		sub_through_write(1, 0x3646);
+		sub_through_write(1, 0x3749);
+		sub_through_write(1, 0x384C);
+		sub_through_write(1, 0x394F);
+		sub_through_write(1, 0x3A52);
+		sub_through_write(1, 0x3B59);
+		sub_through_write(1, 0x3C60);
+		sub_through_write(1, 0x3D67);
+		sub_through_write(1, 0x3E6E);
+		sub_through_write(1, 0x3F7F);
+		sub_through_write(1, 0x4001);
+		sub_through_write(1, 0x4107);
+		sub_through_write(1, 0x420C);
+		sub_through_write(1, 0x4310);
+		sub_through_write(1, 0x4414);
+		sub_through_write(1, 0x4518);
+		sub_through_write(1, 0x461C);
+		sub_through_write(1, 0x4720);
+		sub_through_write(1, 0x4824);
+		sub_through_write(1, 0x4928);
+		sub_through_write(1, 0x4A2B);
+		sub_through_write(1, 0x4B2E);
+		sub_through_write(1, 0x4C31);
+		sub_through_write(1, 0x4D34);
+		sub_through_write(1, 0x4E37);
+		sub_through_write(1, 0x4F3A);
+		sub_through_write(1, 0x503C);
+		sub_through_write(1, 0x513E);
+		sub_through_write(1, 0x523F);
+		sub_through_write(1, 0x5340);
+		sub_through_write(1, 0x5441);
+		sub_through_write(1, 0x5543);
+		sub_through_write(1, 0x5646);
+		sub_through_write(1, 0x5749);
+		sub_through_write(1, 0x584C);
+		sub_through_write(1, 0x594F);
+		sub_through_write(1, 0x5A52);
+		sub_through_write(1, 0x5B59);
+		sub_through_write(1, 0x5C60);
+		sub_through_write(1, 0x5D67);
+		sub_through_write(1, 0x5E6E);
+		sub_through_write(1, 0x5F7E);
+		sub_through_write(1, 0x6000);
+		sub_through_write(1, 0x6107);
+		sub_through_write(1, 0x620C);
+		sub_through_write(1, 0x6310);
+		sub_through_write(1, 0x6414);
+		sub_through_write(1, 0x6518);
+		sub_through_write(1, 0x661C);
+		sub_through_write(1, 0x6720);
+		sub_through_write(1, 0x6824);
+		sub_through_write(1, 0x6928);
+		sub_through_write(1, 0x6A2B);
+		sub_through_write(1, 0x6B2E);
+		sub_through_write(1, 0x6C31);
+		sub_through_write(1, 0x6D34);
+		sub_through_write(1, 0x6E37);
+		sub_through_write(1, 0x6F3A);
+		sub_through_write(1, 0x703C);
+		sub_through_write(1, 0x713E);
+		sub_through_write(1, 0x723F);
+		sub_through_write(1, 0x7340);
+		sub_through_write(1, 0x7441);
+		sub_through_write(1, 0x7543);
+		sub_through_write(1, 0x7646);
+		sub_through_write(1, 0x7749);
+		sub_through_write(1, 0x784C);
+		sub_through_write(1, 0x794F);
+		sub_through_write(1, 0x7A52);
+		sub_through_write(1, 0x7B59);
+		sub_through_write(1, 0x7C60);
+		sub_through_write(1, 0x7D67);
+		sub_through_write(1, 0x7E6E);
+		sub_through_write(1, 0x7F7D);
+
+		sub_through_write(1, 0x1851);	/* Display on */
+
+		mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+		/* 1 pixel / 1 post clock */
+		mddi_queue_register_write(REG_CLKDIV2, 0x3b00, FALSE, 0);
+
+		/* SUB LCD select */
+		mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+		/* RS=0,command initiate number=0,select master mode */
+		mddi_queue_register_write(REG_SUBCTL, 0x0202, FALSE, 0);
+
+		/* Sub LCD Data transform start */
+		mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+	} else if (sharp_subpanel_type == SHARP_SUB_ROHM) {
+
+		sub_through_write(0, 0x01);	/* Display setting */
+		sub_through_write(1, 0x00);
+
+		mddi_wait(1);
+		/* Wait 100us  <----- ******* Update 2005/01/24 */
+
+		sub_through_write(0, 0xB6);
+		sub_through_write(1, 0x0C);
+		sub_through_write(1, 0x4A);
+		sub_through_write(1, 0x20);
+		sub_through_write(0, 0x3A);
+		sub_through_write(1, 0x05);
+		sub_through_write(0, 0xB7);
+		sub_through_write(1, 0x01);
+		sub_through_write(0, 0xBA);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x02);
+		sub_through_write(0, 0x25);
+		sub_through_write(1, 0x4F);
+		sub_through_write(0, 0xBB);
+		sub_through_write(1, 0x00);
+		sub_through_write(0, 0x36);
+		sub_through_write(1, 0x00);
+		sub_through_write(0, 0xB1);
+		sub_through_write(1, 0x05);
+		sub_through_write(0, 0xBE);
+		sub_through_write(1, 0x80);
+		sub_through_write(0, 0x26);
+		sub_through_write(1, 0x01);
+		sub_through_write(0, 0x2A);
+		sub_through_write(1, 0x02);
+		sub_through_write(1, 0x81);
+		sub_through_write(0, 0x2B);
+		sub_through_write(1, 0x00);
+		sub_through_write(1, 0x7F);
+
+		sub_through_write(0, 0x2C);
+		sub_through_write(0, 0x11);	/* Sleep mode off */
+
+		mddi_wait(1);
+		/* Wait 100 ms <----- ******* Update 2005/01/24 */
+
+		sub_through_write(0, 0x29);	/* Display on */
+		sub_through_write(0, 0xB3);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0xAA);
+		sub_through_write(1, 0xA0);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x30);
+		sub_through_write(1, 0xA6);
+		sub_through_write(1, 0xFF);
+		sub_through_write(1, 0x9A);
+		sub_through_write(1, 0x9F);
+		sub_through_write(1, 0xAF);
+		sub_through_write(1, 0xBC);
+		sub_through_write(1, 0xCF);
+		sub_through_write(1, 0xDF);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x9C);
+		sub_through_write(1, 0x8A);
+
+		sub_through_write(0, 0x002C);	/* Display on */
+
+		/* 1 pixel / 2 post clock */
+		mddi_queue_register_write(REG_CLKDIV2, 0x7b00, FALSE, 0);
+
+		/* SUB LCD select */
+		mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+		/* RS=1,command initiate number=0,select master mode */
+		mddi_queue_register_write(REG_SUBCTL, 0x0242, FALSE, 0);
+
+		/* Sub LCD Data transform start */
+		mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+	}
+
+	/* Set the MDP pixel data attributes for Sub Display */
+	mddi_host_write_pix_attr_reg(0x00C0);
+}
+
+void mddi_sharp_lcd_vsync_detected(boolean detected)
+{
+	/* static timetick_type start_time = 0; */
+	static struct timeval start_time;
+	static boolean first_time = TRUE;
+	/* uint32 mdp_cnt_val = 0; */
+	/* timetick_type elapsed_us; */
+	struct timeval now;
+	uint32 elapsed_us;
+	uint32 num_vsyncs;
+
+	if ((detected) || (mddi_sharp_vsync_attempts > 5)) {
+		if ((detected) && (mddi_sharp_monitor_refresh_value)) {
+			/* if (start_time != 0) */
+			if (!first_time) {
+				jiffies_to_timeval(jiffies, &now);
+				elapsed_us =
+				    (now.tv_sec - start_time.tv_sec) * 1000000 +
+				    now.tv_usec - start_time.tv_usec;
+				/*
+				* LCD is configured for a refresh every usecs,
+				* so to determine the number of vsyncs that
+				* have occurred since the last measurement add
+				* half that to the time difference and divide
+				* by the refresh rate.
+				*/
+				num_vsyncs = (elapsed_us +
+					      (mddi_sharp_usecs_per_refresh >>
+					       1)) /
+				    mddi_sharp_usecs_per_refresh;
+				/*
+				 * LCD is configured for * hsyncs (rows) per
+				 * refresh cycle. Calculate new rows_per_second
+				 * value based upon these new measurements.
+				 * MDP can update with this new value.
+				 */
+				mddi_sharp_rows_per_second =
+				    (mddi_sharp_rows_per_refresh * 1000 *
+				     num_vsyncs) / (elapsed_us / 1000);
+			}
+			/* start_time = timetick_get(); */
+			first_time = FALSE;
+			jiffies_to_timeval(jiffies, &start_time);
+			if (mddi_sharp_report_refresh_measurements) {
+				/* mdp_cnt_val = MDP_LINE_COUNT; */
+			}
+		}
+		/* if detected = TRUE, client initiated wakeup was detected */
+		if (mddi_sharp_vsync_handler != NULL) {
+			(*mddi_sharp_vsync_handler)
+			    (mddi_sharp_vsync_handler_arg);
+			mddi_sharp_vsync_handler = NULL;
+		}
+		mddi_vsync_detect_enabled = FALSE;
+		mddi_sharp_vsync_attempts = 0;
+		/* need to clear this vsync wakeup */
+		if (!mddi_queue_register_write_int(REG_INTR, 0x0000)) {
+			MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+		}
+		if (!detected) {
+			/* give up after 5 failed attempts but show error */
+			MDDI_MSG_NOTICE("Vsync detection failed!\n");
+		} else if ((mddi_sharp_monitor_refresh_value) &&
+			(mddi_sharp_report_refresh_measurements)) {
+			MDDI_MSG_NOTICE("  Lines Per Second=%d!\n",
+				mddi_sharp_rows_per_second);
+		}
+	} else
+		/* if detected = FALSE, we woke up from hibernation, but did not
+		 * detect client initiated wakeup.
+		 */
+		mddi_sharp_vsync_attempts++;
+}
+
+/* ISR to be executed */
+void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg)
+{
+	boolean error = FALSE;
+	unsigned long flags;
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	/* INTLOCK(); */
+
+	if (mddi_sharp_vsync_handler != NULL)
+		error = TRUE;
+
+	/* Register the handler for this particular GROUP interrupt source */
+	mddi_sharp_vsync_handler = handler;
+	mddi_sharp_vsync_handler_arg = arg;
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+	/* INTFREE(); */
+
+	if (error)
+		MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+
+	/* Enable the vsync wakeup */
+	mddi_queue_register_write(REG_INTR, 0x8100, FALSE, 0);
+
+	mddi_sharp_vsync_attempts = 1;
+	mddi_vsync_detect_enabled = TRUE;
+}				/* mddi_sharp_vsync_set_handler */
+
+static int mddi_sharp_lcd_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (mfd->panel.id == SHARP_QVGA_PRIM)
+		mddi_sharp_prim_lcd_init();
+	else
+		mddi_sharp_sub_lcd_init();
+
+	return 0;
+}
+
+static int mddi_sharp_lcd_off(struct platform_device *pdev)
+{
+	mddi_sharp_lcd_powerdown();
+	return 0;
+}
+
+static int __init mddi_sharp_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		mddi_sharp_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_sharp_probe,
+	.driver = {
+		.name   = "mddi_sharp_qvga",
+	},
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data0 = {
+	.on = mddi_sharp_lcd_on,
+	.off = mddi_sharp_lcd_off,
+	.set_backlight = mddi_sharp_lcd_set_backlight,
+	.set_vsync_notifier = mddi_sharp_vsync_set_handler,
+};
+
+static struct platform_device this_device_0 = {
+	.name   = "mddi_sharp_qvga",
+	.id	= SHARP_QVGA_PRIM,
+	.dev	= {
+		.platform_data = &mddi_sharp_panel_data0,
+	}
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data1 = {
+	.on = mddi_sharp_lcd_on,
+	.off = mddi_sharp_lcd_off,
+};
+
+static struct platform_device this_device_1 = {
+	.name   = "mddi_sharp_qvga",
+	.id	= SHARP_128X128_SECD,
+	.dev	= {
+		.platform_data = &mddi_sharp_panel_data1,
+	}
+};
+
+static int __init mddi_sharp_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_sharp_qvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+
+		if (((id >> 16) != 0x0) || ((id & 0xffff) != 0x8835))
+			return 0;
+	}
+#endif
+	if (mddi_host_core_version > 8) {
+		/* can use faster refresh with newer hw revisions */
+		mddi_sharp_debug_60hz_refresh = TRUE;
+
+		/* Timing variables for tracking vsync */
+		/* dot_clock = 6.00MHz
+		 * horizontal count = 296
+		 * vertical count = 338
+		 * refresh rate = 6000000/(296+338) = 60Hz
+		 */
+		mddi_sharp_rows_per_second = 20270;	/* 6000000/296 */
+		mddi_sharp_rows_per_refresh = 338;
+		mddi_sharp_usecs_per_refresh = 16674;	/* (296+338)/6000000 */
+	} else {
+		/* Timing variables for tracking vsync */
+		/* dot_clock = 5.20MHz
+		 * horizontal count = 376
+		 * vertical count = 338
+		 * refresh rate = 5200000/(376+338) = 41Hz
+		 */
+		mddi_sharp_rows_per_second = 13830;	/* 5200000/376 */
+		mddi_sharp_rows_per_refresh = 338;
+		mddi_sharp_usecs_per_refresh = 24440;	/* (376+338)/5200000 */
+	}
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &mddi_sharp_panel_data0.panel_info;
+		pinfo->xres = 240;
+		pinfo->yres = 320;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->fb_num = 2;
+		pinfo->clk_rate = 122880000;
+		pinfo->clk_min = 120000000;
+		pinfo->clk_max = 125000000;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 =
+			(mddi_sharp_rows_per_second * 100) /
+			mddi_sharp_rows_per_refresh;
+		pinfo->lcd.v_back_porch = 12;
+		pinfo->lcd.v_front_porch = 6;
+		pinfo->lcd.v_pulse_width = 0;
+		pinfo->lcd.hw_vsync_mode = FALSE;
+		pinfo->lcd.vsync_notifier_period = (1 * HZ);
+		pinfo->bl_max = 7;
+		pinfo->bl_min = 1;
+
+		ret = platform_device_register(&this_device_0);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+
+		pinfo = &mddi_sharp_panel_data1.panel_info;
+		pinfo->xres = 128;
+		pinfo->yres = 128;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_2;
+		pinfo->mddi.vdopkt = 0x400;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->clk_rate = 122880000;
+		pinfo->clk_min = 120000000;
+		pinfo->clk_max = 125000000;
+		pinfo->fb_num = 2;
+
+		ret = platform_device_register(&this_device_1);
+		if (ret) {
+			platform_device_unregister(&this_device_0);
+			platform_driver_unregister(&this_driver);
+		}
+	}
+
+	if (!ret)
+		mddi_lcd.vsync_detected = mddi_sharp_lcd_vsync_detected;
+
+	return ret;
+}
+
+module_init(mddi_sharp_init);
diff --git a/drivers/staging/msm/mddi_toshiba.c b/drivers/staging/msm/mddi_toshiba.c
new file mode 100644
index 00000000000..e96342d477a
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.c
@@ -0,0 +1,1741 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+#define TM_GET_DID(id) ((id) & 0xff)
+#define TM_GET_PID(id) (((id) & 0xff00)>>8)
+
+#define MDDI_CLIENT_CORE_BASE  0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE         0x120000
+#define PWM_BLOCK_BASE         0x140000
+#define SYSTEM_BLOCK1_BASE     0x160000
+
+#define TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
+#define DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
+#define DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
+#define DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
+#define SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
+
+#define BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
+#define BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
+#define BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
+#define BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
+#define BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
+
+#define SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
+#define PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
+#define START       (LCD_CONTROL_BLOCK_BASE|0x08)
+#define PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
+
+#define INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
+#define INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
+
+#define PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
+#define HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
+#define HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
+#define HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
+#define VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
+#define VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
+#define VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
+#define WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
+#define REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
+#define WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
+#define RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
+#define ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
+#define ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
+#define ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
+#define ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
+#define ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
+#define ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
+#define ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
+#define MONI        (LCD_CONTROL_BLOCK_BASE|0xB0)
+#define VPOS        (LCD_CONTROL_BLOCK_BASE|0xC0)
+
+#define SSICTL      (SPI_BLOCK_BASE|0x00)
+#define SSITIME     (SPI_BLOCK_BASE|0x04)
+#define SSITX       (SPI_BLOCK_BASE|0x08)
+#define SSIINTS     (SPI_BLOCK_BASE|0x14)
+
+#define TIMER0LOAD    (PWM_BLOCK_BASE|0x00)
+#define TIMER0CTRL    (PWM_BLOCK_BASE|0x08)
+#define PWM0OFF       (PWM_BLOCK_BASE|0x1C)
+#define TIMER1LOAD    (PWM_BLOCK_BASE|0x20)
+#define TIMER1CTRL    (PWM_BLOCK_BASE|0x28)
+#define PWM1OFF       (PWM_BLOCK_BASE|0x3C)
+#define TIMER2LOAD    (PWM_BLOCK_BASE|0x40)
+#define TIMER2CTRL    (PWM_BLOCK_BASE|0x48)
+#define PWM2OFF       (PWM_BLOCK_BASE|0x5C)
+#define PWMCR         (PWM_BLOCK_BASE|0x68)
+
+#define GPIOIS      (GPIO_BLOCK_BASE|0x08)
+#define GPIOIEV     (GPIO_BLOCK_BASE|0x10)
+#define GPIOIC      (GPIO_BLOCK_BASE|0x20)
+
+#define WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
+#define CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
+#define DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
+#define INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
+#define CNT_DIS     (SYSTEM_BLOCK1_BASE|0x10)
+
+typedef enum {
+	TOSHIBA_STATE_OFF,
+	TOSHIBA_STATE_PRIM_SEC_STANDBY,
+	TOSHIBA_STATE_PRIM_SEC_READY,
+	TOSHIBA_STATE_PRIM_NORMAL_MODE,
+	TOSHIBA_STATE_SEC_NORMAL_MODE
+} mddi_toshiba_state_t;
+
+static uint32 mddi_toshiba_curr_vpos;
+static boolean mddi_toshiba_monitor_refresh_value = FALSE;
+static boolean mddi_toshiba_report_refresh_measurements = FALSE;
+
+boolean mddi_toshiba_61Hz_refresh = TRUE;
+
+/* Modifications to timing to increase refresh rate to > 60Hz.
+ *   20MHz dot clock.
+ *   646 total rows.
+ *   506 total columns.
+ *   refresh rate = 61.19Hz
+ */
+static uint32 mddi_toshiba_rows_per_second = 39526;
+static uint32 mddi_toshiba_usecs_per_refresh = 16344;
+static uint32 mddi_toshiba_rows_per_refresh = 646;
+extern boolean mddi_vsync_detect_enabled;
+
+static msm_fb_vsync_handler_type mddi_toshiba_vsync_handler;
+static void *mddi_toshiba_vsync_handler_arg;
+static uint16 mddi_toshiba_vsync_attempts;
+
+static mddi_toshiba_state_t toshiba_state = TOSHIBA_STATE_OFF;
+
+static struct msm_panel_common_pdata *mddi_toshiba_pdata;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev);
+static int mddi_toshiba_lcd_off(struct platform_device *pdev);
+
+static void mddi_toshiba_state_transition(mddi_toshiba_state_t a,
+					  mddi_toshiba_state_t b)
+{
+	if (toshiba_state != a) {
+		MDDI_MSG_ERR("toshiba state trans. (%d->%d) found %d\n", a, b,
+			     toshiba_state);
+	}
+	toshiba_state = b;
+}
+
+#define GORDON_REG_IMGCTL1      0x10	/* Image interface control 1   */
+#define GORDON_REG_IMGCTL2      0x11	/* Image interface control 2   */
+#define GORDON_REG_IMGSET1      0x12	/* Image interface settings 1  */
+#define GORDON_REG_IMGSET2      0x13	/* Image interface settings 2  */
+#define GORDON_REG_IVBP1        0x14	/* DM0: Vert back porch        */
+#define GORDON_REG_IHBP1        0x15	/* DM0: Horiz back porch       */
+#define GORDON_REG_IVNUM1       0x16	/* DM0: Num of vert lines      */
+#define GORDON_REG_IHNUM1       0x17	/* DM0: Num of pixels per line */
+#define GORDON_REG_IVBP2        0x18	/* DM1: Vert back porch        */
+#define GORDON_REG_IHBP2        0x19	/* DM1: Horiz back porch       */
+#define GORDON_REG_IVNUM2       0x1A	/* DM1: Num of vert lines      */
+#define GORDON_REG_IHNUM2       0x1B	/* DM1: Num of pixels per line */
+#define GORDON_REG_LCDIFCTL1    0x30	/* LCD interface control 1     */
+#define GORDON_REG_VALTRAN      0x31	/* LCD IF ctl: VALTRAN sync flag */
+#define GORDON_REG_AVCTL        0x33
+#define GORDON_REG_LCDIFCTL2    0x34	/* LCD interface control 2     */
+#define GORDON_REG_LCDIFCTL3    0x35	/* LCD interface control 3     */
+#define GORDON_REG_LCDIFSET1    0x36	/* LCD interface settings 1    */
+#define GORDON_REG_PCCTL        0x3C
+#define GORDON_REG_TPARAM1      0x40
+#define GORDON_REG_TLCDIF1      0x41
+#define GORDON_REG_TSSPB_ST1    0x42
+#define GORDON_REG_TSSPB_ED1    0x43
+#define GORDON_REG_TSCK_ST1     0x44
+#define GORDON_REG_TSCK_WD1     0x45
+#define GORDON_REG_TGSPB_VST1   0x46
+#define GORDON_REG_TGSPB_VED1   0x47
+#define GORDON_REG_TGSPB_CH1    0x48
+#define GORDON_REG_TGCK_ST1     0x49
+#define GORDON_REG_TGCK_ED1     0x4A
+#define GORDON_REG_TPCTL_ST1    0x4B
+#define GORDON_REG_TPCTL_ED1    0x4C
+#define GORDON_REG_TPCHG_ED1    0x4D
+#define GORDON_REG_TCOM_CH1     0x4E
+#define GORDON_REG_THBP1        0x4F
+#define GORDON_REG_TPHCTL1      0x50
+#define GORDON_REG_EVPH1        0x51
+#define GORDON_REG_EVPL1        0x52
+#define GORDON_REG_EVNH1        0x53
+#define GORDON_REG_EVNL1        0x54
+#define GORDON_REG_TBIAS1       0x55
+#define GORDON_REG_TPARAM2      0x56
+#define GORDON_REG_TLCDIF2      0x57
+#define GORDON_REG_TSSPB_ST2    0x58
+#define GORDON_REG_TSSPB_ED2    0x59
+#define GORDON_REG_TSCK_ST2     0x5A
+#define GORDON_REG_TSCK_WD2     0x5B
+#define GORDON_REG_TGSPB_VST2   0x5C
+#define GORDON_REG_TGSPB_VED2   0x5D
+#define GORDON_REG_TGSPB_CH2    0x5E
+#define GORDON_REG_TGCK_ST2     0x5F
+#define GORDON_REG_TGCK_ED2     0x60
+#define GORDON_REG_TPCTL_ST2    0x61
+#define GORDON_REG_TPCTL_ED2    0x62
+#define GORDON_REG_TPCHG_ED2    0x63
+#define GORDON_REG_TCOM_CH2     0x64
+#define GORDON_REG_THBP2        0x65
+#define GORDON_REG_TPHCTL2      0x66
+#define GORDON_REG_EVPH2        0x67
+#define GORDON_REG_EVPL2        0x68
+#define GORDON_REG_EVNH2        0x69
+#define GORDON_REG_EVNL2        0x6A
+#define GORDON_REG_TBIAS2       0x6B
+#define GORDON_REG_POWCTL       0x80
+#define GORDON_REG_POWOSC1      0x81
+#define GORDON_REG_POWOSC2      0x82
+#define GORDON_REG_POWSET       0x83
+#define GORDON_REG_POWTRM1      0x85
+#define GORDON_REG_POWTRM2      0x86
+#define GORDON_REG_POWTRM3      0x87
+#define GORDON_REG_POWTRMSEL    0x88
+#define GORDON_REG_POWHIZ       0x89
+
+void serigo(uint16 reg, uint8 data)
+{
+	uint32 mddi_val = 0;
+	mddi_queue_register_read(SSIINTS, &mddi_val, TRUE, 0);
+	if (mddi_val & (1 << 8))
+		mddi_wait(1);
+	/* No De-assert of CS and send 2 bytes */
+	mddi_val = 0x90000 | ((0x00FF & reg) << 8) | data;
+	mddi_queue_register_write(SSITX, mddi_val, TRUE, 0);
+}
+
+void gordon_init(void)
+{
+       /* Image interface settings ***/
+	serigo(GORDON_REG_IMGCTL2, 0x00);
+	serigo(GORDON_REG_IMGSET1, 0x01);
+
+	/* Exchange the RGB signal for J510(Softbank mobile) */
+	serigo(GORDON_REG_IMGSET2, 0x12);
+	serigo(GORDON_REG_LCDIFSET1, 0x00);
+	mddi_wait(2);
+
+	/* Pre-charge settings */
+	serigo(GORDON_REG_PCCTL, 0x09);
+	serigo(GORDON_REG_LCDIFCTL2, 0x1B);
+	mddi_wait(1);
+}
+
+void gordon_disp_on(void)
+{
+	/*gordon_dispmode setting */
+	/*VGA settings */
+	serigo(GORDON_REG_TPARAM1, 0x30);
+	serigo(GORDON_REG_TLCDIF1, 0x00);
+	serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+	serigo(GORDON_REG_TSSPB_ED1, 0x93);
+	mddi_wait(2);
+	serigo(GORDON_REG_TSCK_ST1, 0x88);
+	serigo(GORDON_REG_TSCK_WD1, 0x00);
+	serigo(GORDON_REG_TGSPB_VST1, 0x01);
+	serigo(GORDON_REG_TGSPB_VED1, 0x02);
+	mddi_wait(2);
+	serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+	serigo(GORDON_REG_TGCK_ST1, 0x80);
+	serigo(GORDON_REG_TGCK_ED1, 0x3C);
+	serigo(GORDON_REG_TPCTL_ST1, 0x50);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPCTL_ED1, 0x74);
+	serigo(GORDON_REG_TPCHG_ED1, 0x78);
+	serigo(GORDON_REG_TCOM_CH1, 0x50);
+	serigo(GORDON_REG_THBP1, 0x84);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPHCTL1, 0x00);
+	serigo(GORDON_REG_EVPH1, 0x70);
+	serigo(GORDON_REG_EVPL1, 0x64);
+	serigo(GORDON_REG_EVNH1, 0x56);
+	mddi_wait(2);
+	serigo(GORDON_REG_EVNL1, 0x48);
+	serigo(GORDON_REG_TBIAS1, 0x88);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPARAM2, 0x28);
+	serigo(GORDON_REG_TLCDIF2, 0x14);
+	serigo(GORDON_REG_TSSPB_ST2, 0x49);
+	serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+	mddi_wait(2);
+	serigo(GORDON_REG_TSCK_ST2, 0x4A);
+	serigo(GORDON_REG_TSCK_WD2, 0x02);
+	serigo(GORDON_REG_TGSPB_VST2, 0x02);
+	serigo(GORDON_REG_TGSPB_VED2, 0x03);
+	mddi_wait(2);
+	serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+	serigo(GORDON_REG_TGCK_ST2, 0x40);
+	serigo(GORDON_REG_TGCK_ED2, 0x1E);
+	serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+	serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+	serigo(GORDON_REG_TCOM_CH2, 0x28);
+	serigo(GORDON_REG_THBP2, 0x4D);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPHCTL2, 0x1A);
+	mddi_wait(2);
+	serigo(GORDON_REG_IVBP1, 0x02);
+	serigo(GORDON_REG_IHBP1, 0x90);
+	serigo(GORDON_REG_IVNUM1, 0xA0);
+	serigo(GORDON_REG_IHNUM1, 0x78);
+	mddi_wait(2);
+	serigo(GORDON_REG_IVBP2, 0x02);
+	serigo(GORDON_REG_IHBP2, 0x48);
+	serigo(GORDON_REG_IVNUM2, 0x50);
+	serigo(GORDON_REG_IHNUM2, 0x3C);
+	mddi_wait(2);
+	serigo(GORDON_REG_POWCTL, 0x03);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x07);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x0F);
+	mddi_wait(15);
+	serigo(GORDON_REG_AVCTL, 0x03);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x1F);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x5F);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x7F);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL1, 0x02);
+	mddi_wait(15);
+	serigo(GORDON_REG_IMGCTL1, 0x00);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL3, 0x00);
+	mddi_wait(15);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL1, 0x03);
+	serigo(GORDON_REG_LCDIFCTL1, 0x03);
+	mddi_wait(1);
+}
+
+void gordon_disp_off(void)
+{
+	serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	serigo(GORDON_REG_LCDIFCTL1, 0x02);
+	serigo(GORDON_REG_LCDIFCTL3, 0x01);
+	mddi_wait(20);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	serigo(GORDON_REG_IMGCTL1, 0x01);
+	serigo(GORDON_REG_LCDIFCTL1, 0x00);
+	mddi_wait(20);
+	serigo(GORDON_REG_POWCTL, 0x1F);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x07);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x03);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x00);
+	mddi_wait(40);
+}
+
+void gordon_disp_init(void)
+{
+	gordon_init();
+	mddi_wait(20);
+	gordon_disp_on();
+}
+
+static void toshiba_common_initial_setup(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT) {
+		write_client_reg(DPSET0    , 0x4bec0066, TRUE);
+		write_client_reg(DPSET1    , 0x00000113, TRUE);
+		write_client_reg(DPSUS     , 0x00000000, TRUE);
+		write_client_reg(DPRUN     , 0x00000001, TRUE);
+		mddi_wait(5);
+		write_client_reg(SYSCKENA  , 0x00000001, TRUE);
+		write_client_reg(CLKENB    , 0x0000a0e9, TRUE);
+
+		write_client_reg(GPIODATA  , 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR   , 0x0000024D, TRUE);
+		write_client_reg(GPIOSEL   , 0x00000173, TRUE);
+		write_client_reg(GPIOPC    , 0x03C300C0, TRUE);
+		write_client_reg(WKREQ     , 0x00000000, TRUE);
+		write_client_reg(GPIOIS    , 0x00000000, TRUE);
+		write_client_reg(GPIOIEV   , 0x00000001, TRUE);
+		write_client_reg(GPIOIC    , 0x000003FF, TRUE);
+		write_client_reg(GPIODATA  , 0x00040004, TRUE);
+
+		write_client_reg(GPIODATA  , 0x00080008, TRUE);
+		write_client_reg(DRAMPWR   , 0x00000001, TRUE);
+		write_client_reg(CLKENB    , 0x0000a0eb, TRUE);
+		write_client_reg(PWMCR     , 0x00000000, TRUE);
+		mddi_wait(1);
+
+		write_client_reg(SSICTL    , 0x00060399, TRUE);
+		write_client_reg(SSITIME   , 0x00000100, TRUE);
+		write_client_reg(CNT_DIS   , 0x00000002, TRUE);
+		write_client_reg(SSICTL    , 0x0006039b, TRUE);
+
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+
+		write_client_reg(SSITX     , 0x000800BA, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		write_client_reg(SSITX     , 0x00080036, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x0008003A, TRUE);
+		write_client_reg(SSITX     , 0x00000160, TRUE);
+		write_client_reg(SSITX     , 0x000800B1, TRUE);
+		write_client_reg(SSITX     , 0x0000015D, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B2, TRUE);
+		write_client_reg(SSITX     , 0x00000133, TRUE);
+		write_client_reg(SSITX     , 0x000800B3, TRUE);
+		write_client_reg(SSITX     , 0x00000122, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B4, TRUE);
+		write_client_reg(SSITX     , 0x00000102, TRUE);
+		write_client_reg(SSITX     , 0x000800B5, TRUE);
+		write_client_reg(SSITX     , 0x0000011E, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B6, TRUE);
+		write_client_reg(SSITX     , 0x00000127, TRUE);
+		write_client_reg(SSITX     , 0x000800B7, TRUE);
+		write_client_reg(SSITX     , 0x00000103, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B9, TRUE);
+		write_client_reg(SSITX     , 0x00000124, TRUE);
+		write_client_reg(SSITX     , 0x000800BD, TRUE);
+		write_client_reg(SSITX     , 0x000001A1, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800BB, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		write_client_reg(SSITX     , 0x000800BF, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800BE, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		write_client_reg(SSITX     , 0x000800C0, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C1, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		write_client_reg(SSITX     , 0x000800C2, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C3, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C4, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C5, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C6, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C7, TRUE);
+		write_client_reg(SSITX     , 0x00080164, TRUE);
+		write_client_reg(SSITX     , 0x00000145, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C8, TRUE);
+		write_client_reg(SSITX     , 0x00000144, TRUE);
+		write_client_reg(SSITX     , 0x000800C9, TRUE);
+		write_client_reg(SSITX     , 0x00000152, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800CA, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800EC, TRUE);
+		write_client_reg(SSITX     , 0x00080101, TRUE);
+		write_client_reg(SSITX     , 0x000001FC, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800CF, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D0, TRUE);
+		write_client_reg(SSITX     , 0x00080110, TRUE);
+		write_client_reg(SSITX     , 0x00000104, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D1, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D2, TRUE);
+		write_client_reg(SSITX     , 0x00080100, TRUE);
+		write_client_reg(SSITX     , 0x00000128, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D3, TRUE);
+		write_client_reg(SSITX     , 0x00080100, TRUE);
+		write_client_reg(SSITX     , 0x00000128, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D4, TRUE);
+		write_client_reg(SSITX     , 0x00080126, TRUE);
+		write_client_reg(SSITX     , 0x000001A4, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D5, TRUE);
+		write_client_reg(SSITX     , 0x00000120, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800EF, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+
+		write_client_reg(BITMAP0   , 0x032001E0, TRUE);
+		write_client_reg(BITMAP1   , 0x032001E0, TRUE);
+		write_client_reg(BITMAP2   , 0x014000F0, TRUE);
+		write_client_reg(BITMAP3   , 0x014000F0, TRUE);
+		write_client_reg(BITMAP4   , 0x014000F0, TRUE);
+		write_client_reg(CLKENB    , 0x0000A1EB, TRUE);
+		write_client_reg(PORT_ENB  , 0x00000001, TRUE);
+		write_client_reg(PORT      , 0x00000004, TRUE);
+		write_client_reg(PXL       , 0x00000002, TRUE);
+		write_client_reg(MPLFBUF   , 0x00000000, TRUE);
+		write_client_reg(HCYCLE    , 0x000000FD, TRUE);
+		write_client_reg(HSW       , 0x00000003, TRUE);
+		write_client_reg(HDE_START , 0x00000007, TRUE);
+		write_client_reg(HDE_SIZE  , 0x000000EF, TRUE);
+		write_client_reg(VCYCLE    , 0x00000325, TRUE);
+		write_client_reg(VSW       , 0x00000001, TRUE);
+		write_client_reg(VDE_START , 0x00000003, TRUE);
+		write_client_reg(VDE_SIZE  , 0x0000031F, TRUE);
+		write_client_reg(START     , 0x00000001, TRUE);
+		mddi_wait(32);
+		write_client_reg(SSITX     , 0x000800BC, TRUE);
+		write_client_reg(SSITX     , 0x00000180, TRUE);
+		write_client_reg(SSITX     , 0x0008003B, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B0, TRUE);
+		write_client_reg(SSITX     , 0x00000116, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B8, TRUE);
+		write_client_reg(SSITX     , 0x000801FF, TRUE);
+		write_client_reg(SSITX     , 0x000001F5, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x00000011, TRUE);
+		mddi_wait(5);
+		write_client_reg(SSITX     , 0x00000029, TRUE);
+		return;
+	}
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+		write_client_reg(DPSET1, 0x00000113, TRUE);
+		write_client_reg(DPSUS, 0x00000000, TRUE);
+		write_client_reg(DPRUN, 0x00000001, TRUE);
+		mddi_wait(14);
+		write_client_reg(SYSCKENA, 0x00000001, TRUE);
+		write_client_reg(CLKENB, 0x000000EF, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR, 0x0000024D, TRUE);
+		write_client_reg(SYSTEM_BLOCK2_BASE, 0x00000173, TRUE);
+		write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+		write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000000, TRUE);
+		write_client_reg(GPIOIS, 0x00000000, TRUE);
+		write_client_reg(GPIOIEV, 0x00000001, TRUE);
+		write_client_reg(GPIOIC, 0x000003FF, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x00060006, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x00080008, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x02000200, TRUE);
+		write_client_reg(DRAMPWR, 0x00000001, TRUE);
+		write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+		write_client_reg(PWM_BLOCK_BASE, 0x00001388, TRUE);
+		write_client_reg(PWM0OFF, 0x00001387, TRUE);
+		write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+		write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+		write_client_reg(PWM1OFF, 0x00001387, TRUE);
+		write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+		write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+		write_client_reg(PWMCR, 0x00000003, TRUE);
+		mddi_wait(1);
+		write_client_reg(SPI_BLOCK_BASE, 0x00063111, TRUE);
+		write_client_reg(SSITIME, 0x00000100, TRUE);
+		write_client_reg(SPI_BLOCK_BASE, 0x00063113, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(CLKENB, 0x0000A1EF, TRUE);
+		write_client_reg(START, 0x00000000, TRUE);
+		write_client_reg(WRSTB, 0x0000003F, TRUE);
+		write_client_reg(RDSTB, 0x00000432, TRUE);
+		write_client_reg(PORT_ENB, 0x00000002, TRUE);
+		write_client_reg(VSYNIF, 0x00000000, TRUE);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x00000001, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(10);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x80000000, TRUE);
+		write_client_reg(ASY_DATC, 0x80000000, TRUE);
+		write_client_reg(ASY_DATD, 0x80000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+		write_client_reg(ASY_DATA, 0x80000007, TRUE);
+		write_client_reg(ASY_DATB, 0x00004005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(20);
+		write_client_reg(ASY_DATA, 0x80000059, TRUE);
+		write_client_reg(ASY_DATB, 0x00000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	} else {
+		write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+		write_client_reg(DPSET1, 0x00000113, TRUE);
+		write_client_reg(DPSUS, 0x00000000, TRUE);
+		write_client_reg(DPRUN, 0x00000001, TRUE);
+		mddi_wait(14);
+		write_client_reg(SYSCKENA, 0x00000001, TRUE);
+		write_client_reg(CLKENB, 0x000000EF, TRUE);
+		write_client_reg(GPIODATA, 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR, 0x0000024D, TRUE);
+		write_client_reg(GPIOSEL, 0x00000173, TRUE);
+		write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+		write_client_reg(WKREQ, 0x00000000, TRUE);
+		write_client_reg(GPIOIS, 0x00000000, TRUE);
+		write_client_reg(GPIOIEV, 0x00000001, TRUE);
+		write_client_reg(GPIOIC, 0x000003FF, TRUE);
+		write_client_reg(GPIODATA, 0x00060006, TRUE);
+		write_client_reg(GPIODATA, 0x00080008, TRUE);
+		write_client_reg(GPIODATA, 0x02000200, TRUE);
+
+		if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA) {
+			mddi_wait(400);
+			write_client_reg(DRAMPWR, 0x00000001, TRUE);
+
+			write_client_reg(CNT_DIS, 0x00000002, TRUE);
+			write_client_reg(BITMAP0, 0x01E00320, TRUE);
+			write_client_reg(PORT_ENB, 0x00000001, TRUE);
+			write_client_reg(PORT, 0x00000004, TRUE);
+			write_client_reg(PXL, 0x0000003A, TRUE);
+			write_client_reg(MPLFBUF, 0x00000000, TRUE);
+			write_client_reg(HCYCLE, 0x00000253, TRUE);
+			write_client_reg(HSW, 0x00000003, TRUE);
+			write_client_reg(HDE_START, 0x00000017, TRUE);
+			write_client_reg(HDE_SIZE, 0x0000018F, TRUE);
+			write_client_reg(VCYCLE, 0x000001FF, TRUE);
+			write_client_reg(VSW, 0x00000001, TRUE);
+			write_client_reg(VDE_START, 0x00000003, TRUE);
+			write_client_reg(VDE_SIZE, 0x000001DF, TRUE);
+			write_client_reg(START, 0x00000001, TRUE);
+			mddi_wait(1);
+			write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+			write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+			write_client_reg(PWM1OFF, 0x00000087, TRUE);
+		} else {
+			write_client_reg(DRAMPWR, 0x00000001, TRUE);
+			write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+			write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+			write_client_reg(PWM1OFF, 0x00001387, TRUE);
+		}
+
+		write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+		write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+		write_client_reg(PWMCR, 0x00000003, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSICTL, 0x00000799, TRUE);
+		write_client_reg(SSITIME, 0x00000100, TRUE);
+		write_client_reg(SSICTL, 0x0000079b, TRUE);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800BA, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		write_client_reg(SSITX, 0x00080036, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BB, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x0008003A, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BF, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x000800B1, TRUE);
+		write_client_reg(SSITX, 0x0000015D, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B2, TRUE);
+		write_client_reg(SSITX, 0x00000133, TRUE);
+		write_client_reg(SSITX, 0x000800B3, TRUE);
+		write_client_reg(SSITX, 0x00000122, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B4, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		write_client_reg(SSITX, 0x000800B5, TRUE);
+		write_client_reg(SSITX, 0x0000011F, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B6, TRUE);
+		write_client_reg(SSITX, 0x00000128, TRUE);
+		write_client_reg(SSITX, 0x000800B7, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B9, TRUE);
+		write_client_reg(SSITX, 0x00000120, TRUE);
+		write_client_reg(SSITX, 0x000800BD, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BE, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x000800C0, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C1, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		write_client_reg(SSITX, 0x000800C2, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C3, TRUE);
+		write_client_reg(SSITX, 0x0008010A, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C4, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C5, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C6, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C7, TRUE);
+		write_client_reg(SSITX, 0x00080133, TRUE);
+		write_client_reg(SSITX, 0x00000143, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C8, TRUE);
+		write_client_reg(SSITX, 0x00000144, TRUE);
+		write_client_reg(SSITX, 0x000800C9, TRUE);
+		write_client_reg(SSITX, 0x00000133, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800CA, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800EC, TRUE);
+		write_client_reg(SSITX, 0x00080102, TRUE);
+		write_client_reg(SSITX, 0x00000118, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800CF, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D0, TRUE);
+		write_client_reg(SSITX, 0x00080110, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D1, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D2, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x0000013A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D3, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x0000013A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D4, TRUE);
+		write_client_reg(SSITX, 0x00080124, TRUE);
+		write_client_reg(SSITX, 0x0000016E, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800D5, TRUE);
+		write_client_reg(SSITX, 0x00000124, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800ED, TRUE);
+		write_client_reg(SSITX, 0x00080101, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D6, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D7, TRUE);
+		write_client_reg(SSITX, 0x00080110, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D8, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D9, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000114, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800DE, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000114, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800DF, TRUE);
+		write_client_reg(SSITX, 0x00080112, TRUE);
+		write_client_reg(SSITX, 0x0000013F, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E0, TRUE);
+		write_client_reg(SSITX, 0x0000010B, TRUE);
+		write_client_reg(SSITX, 0x000800E2, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E3, TRUE);
+		write_client_reg(SSITX, 0x00000136, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E4, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E5, TRUE);
+		write_client_reg(SSITX, 0x00080102, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E6, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E7, TRUE);
+		write_client_reg(SSITX, 0x00080104, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E8, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(START, 0x00000000, TRUE);
+		write_client_reg(WRSTB, 0x0000003F, TRUE);
+		write_client_reg(RDSTB, 0x00000432, TRUE);
+		write_client_reg(PORT_ENB, 0x00000002, TRUE);
+		write_client_reg(VSYNIF, 0x00000000, TRUE);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x00000001, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(10);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x80000000, TRUE);
+		write_client_reg(ASY_DATC, 0x80000000, TRUE);
+		write_client_reg(ASY_DATD, 0x80000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+		write_client_reg(ASY_DATA, 0x80000007, TRUE);
+		write_client_reg(ASY_DATB, 0x00004005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(20);
+		write_client_reg(ASY_DATA, 0x80000059, TRUE);
+		write_client_reg(ASY_DATB, 0x00000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	}
+
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_STANDBY,
+				      TOSHIBA_STATE_PRIM_SEC_READY);
+}
+
+static void toshiba_prim_start(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(PORT, 0x00000016, TRUE);
+		write_client_reg(PXL, 0x00000002, TRUE);
+		write_client_reg(MPLFBUF, 0x00000000, TRUE);
+		write_client_reg(HCYCLE, 0x00000185, TRUE);
+		write_client_reg(HSW, 0x00000018, TRUE);
+		write_client_reg(HDE_START, 0x0000004A, TRUE);
+		write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+		write_client_reg(VCYCLE, 0x0000028E, TRUE);
+		write_client_reg(VSW, 0x00000004, TRUE);
+		write_client_reg(VDE_START, 0x00000009, TRUE);
+		write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+		write_client_reg(START, 0x00000001, TRUE);
+		write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000002, TRUE);
+	} else{
+
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(PORT, 0x00000004, TRUE);
+		write_client_reg(PXL, 0x00000002, TRUE);
+		write_client_reg(MPLFBUF, 0x00000000, TRUE);
+
+		if (mddi_toshiba_61Hz_refresh) {
+			write_client_reg(HCYCLE, 0x000000FC, TRUE);
+			mddi_toshiba_rows_per_second = 39526;
+			mddi_toshiba_rows_per_refresh = 646;
+			mddi_toshiba_usecs_per_refresh = 16344;
+		} else {
+			write_client_reg(HCYCLE, 0x0000010b, TRUE);
+			mddi_toshiba_rows_per_second = 37313;
+			mddi_toshiba_rows_per_refresh = 646;
+			mddi_toshiba_usecs_per_refresh = 17313;
+		}
+
+		write_client_reg(HSW, 0x00000003, TRUE);
+		write_client_reg(HDE_START, 0x00000007, TRUE);
+		write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+		write_client_reg(VCYCLE, 0x00000285, TRUE);
+		write_client_reg(VSW, 0x00000001, TRUE);
+		write_client_reg(VDE_START, 0x00000003, TRUE);
+		write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+		write_client_reg(START, 0x00000001, TRUE);
+		mddi_wait(10);
+		write_client_reg(SSITX, 0x000800BC, TRUE);
+		write_client_reg(SSITX, 0x00000180, TRUE);
+		write_client_reg(SSITX, 0x0008003B, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B0, TRUE);
+		write_client_reg(SSITX, 0x00000116, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B8, TRUE);
+		write_client_reg(SSITX, 0x000801FF, TRUE);
+		write_client_reg(SSITX, 0x000001F5, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000011, TRUE);
+		write_client_reg(SSITX, 0x00000029, TRUE);
+		write_client_reg(WKREQ, 0x00000000, TRUE);
+		write_client_reg(WAKEUP, 0x00000000, TRUE);
+		write_client_reg(INTMSK, 0x00000001, TRUE);
+	}
+
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+				      TOSHIBA_STATE_PRIM_NORMAL_MODE);
+}
+
+static void toshiba_sec_start(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(CLKENB, 0x000011EF, TRUE);
+	write_client_reg(BITMAP0, 0x028001E0, TRUE);
+	write_client_reg(BITMAP1, 0x00000000, TRUE);
+	write_client_reg(BITMAP2, 0x00000000, TRUE);
+	write_client_reg(BITMAP3, 0x00000000, TRUE);
+	write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(MPLFBUF, 0x00000004, TRUE);
+	write_client_reg(HCYCLE, 0x0000006B, TRUE);
+	write_client_reg(HSW, 0x00000003, TRUE);
+	write_client_reg(HDE_START, 0x00000007, TRUE);
+	write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+	write_client_reg(VCYCLE, 0x000000E6, TRUE);
+	write_client_reg(VSW, 0x00000001, TRUE);
+	write_client_reg(VDE_START, 0x00000003, TRUE);
+	write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+	write_client_reg(ASY_DATA, 0x80000001, TRUE);
+	write_client_reg(ASY_DATB, 0x0000011B, TRUE);
+	write_client_reg(ASY_DATC, 0x80000002, TRUE);
+	write_client_reg(ASY_DATD, 0x00000700, TRUE);
+	write_client_reg(ASY_DATE, 0x80000003, TRUE);
+	write_client_reg(ASY_DATF, 0x00000230, TRUE);
+	write_client_reg(ASY_DATG, 0x80000008, TRUE);
+	write_client_reg(ASY_DATH, 0x00000402, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000009, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x8000000B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x8000000C, TRUE);
+	write_client_reg(ASY_DATF, 0x00000000, TRUE);
+	write_client_reg(ASY_DATG, 0x8000000D, TRUE);
+	write_client_reg(ASY_DATH, 0x00000409, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x8000000E, TRUE);
+	write_client_reg(ASY_DATB, 0x00000409, TRUE);
+	write_client_reg(ASY_DATC, 0x80000030, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000031, TRUE);
+	write_client_reg(ASY_DATF, 0x00000100, TRUE);
+	write_client_reg(ASY_DATG, 0x80000032, TRUE);
+	write_client_reg(ASY_DATH, 0x00000104, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000033, TRUE);
+	write_client_reg(ASY_DATB, 0x00000400, TRUE);
+	write_client_reg(ASY_DATC, 0x80000034, TRUE);
+	write_client_reg(ASY_DATD, 0x00000306, TRUE);
+	write_client_reg(ASY_DATE, 0x80000035, TRUE);
+	write_client_reg(ASY_DATF, 0x00000706, TRUE);
+	write_client_reg(ASY_DATG, 0x80000036, TRUE);
+	write_client_reg(ASY_DATH, 0x00000707, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000037, TRUE);
+	write_client_reg(ASY_DATB, 0x00000004, TRUE);
+	write_client_reg(ASY_DATC, 0x80000038, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000039, TRUE);
+	write_client_reg(ASY_DATF, 0x00000000, TRUE);
+	write_client_reg(ASY_DATG, 0x8000003A, TRUE);
+	write_client_reg(ASY_DATH, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000044, TRUE);
+	write_client_reg(ASY_DATB, 0x0000AF00, TRUE);
+	write_client_reg(ASY_DATC, 0x80000045, TRUE);
+	write_client_reg(ASY_DATD, 0x0000DB00, TRUE);
+	write_client_reg(ASY_DATE, 0x08000042, TRUE);
+	write_client_reg(ASY_DATF, 0x0000DB00, TRUE);
+	write_client_reg(ASY_DATG, 0x80000021, TRUE);
+	write_client_reg(ASY_DATH, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x0000000C, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	write_client_reg(ASY_DATA, 0x80000022, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000003, TRUE);
+	write_client_reg(START, 0x00000001, TRUE);
+	mddi_wait(60);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000050, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x80000051, TRUE);
+	write_client_reg(ASY_DATD, 0x00000E00, TRUE);
+	write_client_reg(ASY_DATE, 0x80000052, TRUE);
+	write_client_reg(ASY_DATF, 0x00000D01, TRUE);
+	write_client_reg(ASY_DATG, 0x80000053, TRUE);
+	write_client_reg(ASY_DATH, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000058, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005A, TRUE);
+	write_client_reg(ASY_DATD, 0x00000E01, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	write_client_reg(ASY_DATA, 0x80000011, TRUE);
+	write_client_reg(ASY_DATB, 0x00000812, TRUE);
+	write_client_reg(ASY_DATC, 0x80000012, TRUE);
+	write_client_reg(ASY_DATD, 0x00000003, TRUE);
+	write_client_reg(ASY_DATE, 0x80000013, TRUE);
+	write_client_reg(ASY_DATF, 0x00000909, TRUE);
+	write_client_reg(ASY_DATG, 0x80000010, TRUE);
+	write_client_reg(ASY_DATH, 0x00000040, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(40);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000340, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(60);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00003340, TRUE);
+	write_client_reg(ASY_DATC, 0x80000007, TRUE);
+	write_client_reg(ASY_DATD, 0x00004007, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	mddi_wait(1);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004017, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000059, TRUE);
+	write_client_reg(ASY_DATF, 0x00000011, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+	mddi_wait(20);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	/* Index setting of SUB LCDD */
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x00000079, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	/* Index setting of SUB LCDD */
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+				      TOSHIBA_STATE_SEC_NORMAL_MODE);
+}
+
+static void toshiba_prim_lcd_off(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		gordon_disp_off();
+	} else{
+
+		/* Main panel power off (Deep standby in) */
+		write_client_reg(SSITX, 0x000800BC, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x00000028, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B8, TRUE);
+		write_client_reg(SSITX, 0x00000180, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		write_client_reg(SSITX, 0x00000010, TRUE);
+	}
+	write_client_reg(PORT, 0x00000003, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_wait(1);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_wait(3);
+	if (TM_GET_PID(mfd->panel.id) != LCD_SHARP_2P4_VGA) {
+		write_client_reg(SSITX, 0x000800B0, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+	}
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_NORMAL_MODE,
+				      TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_lcd_off(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004016, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000002, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004004, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_toshiba_state_transition(TOSHIBA_STATE_SEC_NORMAL_MODE,
+				      TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_cont_update_start(struct msm_fb_data_type *mfd)
+{
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(INTMASK, 0x00000001, TRUE);
+	write_client_reg(TTBUSSEL, 0x0000000B, TRUE);
+	write_client_reg(MONI, 0x00000008, TRUE);
+	write_client_reg(CLKENB, 0x000000EF, TRUE);
+	write_client_reg(CLKENB, 0x000010EF, TRUE);
+	write_client_reg(CLKENB, 0x000011EF, TRUE);
+	write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+	write_client_reg(HCYCLE, 0x0000006B, TRUE);
+	write_client_reg(HSW, 0x00000003, TRUE);
+	write_client_reg(HDE_START, 0x00000002, TRUE);
+	write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+	write_client_reg(VCYCLE, 0x000000E6, TRUE);
+	write_client_reg(VSW, 0x00000001, TRUE);
+	write_client_reg(VDE_START, 0x00000003, TRUE);
+	write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+	write_client_reg(WRSTB, 0x00000015, TRUE);
+	write_client_reg(MPLFBUF, 0x00000004, TRUE);
+	write_client_reg(ASY_DATA, 0x80000021, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x80000022, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000007, TRUE);
+	write_client_reg(PXL, 0x00000089, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	mddi_wait(2);
+}
+
+static void toshiba_sec_cont_update_stop(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(3);
+	write_client_reg(SRST, 0x00000002, TRUE);
+	mddi_wait(3);
+	write_client_reg(SRST, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_backlight_on(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+	write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+	write_client_reg(PWM0OFF, 0x00000001, TRUE);
+	write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+	write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+	write_client_reg(PWM1OFF, 0x00001387, TRUE);
+	write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+	write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+	write_client_reg(PWMCR, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_sleep_in(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004016, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000002, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004004, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	/* Sleep in sequence */
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000302, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+}
+
+static void toshiba_sec_sleep_out(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	/*  Display ON sequence */
+	write_client_reg(ASY_DATA, 0x80000011, TRUE);
+	write_client_reg(ASY_DATB, 0x00000812, TRUE);
+	write_client_reg(ASY_DATC, 0x80000012, TRUE);
+	write_client_reg(ASY_DATD, 0x00000003, TRUE);
+	write_client_reg(ASY_DATE, 0x80000013, TRUE);
+	write_client_reg(ASY_DATF, 0x00000909, TRUE);
+	write_client_reg(ASY_DATG, 0x80000010, TRUE);
+	write_client_reg(ASY_DATH, 0x00000040, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000340, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(6);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00003340, TRUE);
+	write_client_reg(ASY_DATC, 0x80000007, TRUE);
+	write_client_reg(ASY_DATD, 0x00004007, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	mddi_wait(1);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004017, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000059, TRUE);
+	write_client_reg(ASY_DATF, 0x00000011, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000079, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+}
+
+static void mddi_toshiba_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+	int32 level;
+	int ret = -EPERM;
+	int max = mfd->panel_info.bl_max;
+	int min = mfd->panel_info.bl_min;
+
+	if (mddi_toshiba_pdata && mddi_toshiba_pdata->pmic_backlight) {
+		ret = mddi_toshiba_pdata->pmic_backlight(mfd->bl_level);
+		if (!ret)
+			return;
+	}
+
+	if (ret && mddi_toshiba_pdata && mddi_toshiba_pdata->backlight_level) {
+		level = mddi_toshiba_pdata->backlight_level(mfd->bl_level,
+								max, min);
+
+		if (level < 0)
+			return;
+
+		if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+	} else {
+		if (!max)
+			level = 0;
+		else
+			level = (mfd->bl_level * 4999) / max;
+	}
+
+	write_client_reg(PWM0OFF, level, TRUE);
+}
+
+static void mddi_toshiba_vsync_set_handler(msm_fb_vsync_handler_type handler,	/* ISR to be executed */
+					   void *arg)
+{
+	boolean error = FALSE;
+	unsigned long flags;
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	/* INTLOCK(); */
+
+	if (mddi_toshiba_vsync_handler != NULL) {
+		error = TRUE;
+	} else {
+		/* Register the handler for this particular GROUP interrupt source */
+		mddi_toshiba_vsync_handler = handler;
+		mddi_toshiba_vsync_handler_arg = arg;
+	}
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+	/* MDDI_INTFREE(); */
+	if (error) {
+		MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+	} else {
+		/* Enable the vsync wakeup */
+		mddi_queue_register_write(INTMSK, 0x0000, FALSE, 0);
+
+		mddi_toshiba_vsync_attempts = 1;
+		mddi_vsync_detect_enabled = TRUE;
+	}
+}				/* mddi_toshiba_vsync_set_handler */
+
+static void mddi_toshiba_lcd_vsync_detected(boolean detected)
+{
+	/* static timetick_type start_time = 0; */
+	static struct timeval start_time;
+	static boolean first_time = TRUE;
+	/* uint32 mdp_cnt_val = 0; */
+	/* timetick_type elapsed_us; */
+	struct timeval now;
+	uint32 elapsed_us;
+	uint32 num_vsyncs;
+
+	if ((detected) || (mddi_toshiba_vsync_attempts > 5)) {
+		if ((detected) && (mddi_toshiba_monitor_refresh_value)) {
+			/* if (start_time != 0) */
+			if (!first_time) {
+				jiffies_to_timeval(jiffies, &now);
+				elapsed_us =
+				    (now.tv_sec - start_time.tv_sec) * 1000000 +
+				    now.tv_usec - start_time.tv_usec;
+				/*
+				 * LCD is configured for a refresh every usecs,
+				 *  so to determine the number of vsyncs that
+				 *  have occurred since the last measurement
+				 *  add half that to the time difference and
+				 *  divide by the refresh rate.
+				 */
+				num_vsyncs = (elapsed_us +
+					      (mddi_toshiba_usecs_per_refresh >>
+					       1)) /
+				    mddi_toshiba_usecs_per_refresh;
+				/*
+				 * LCD is configured for * hsyncs (rows) per
+				 * refresh cycle. Calculate new rows_per_second
+				 * value based upon these new measurements.
+				 * MDP can update with this new value.
+				 */
+				mddi_toshiba_rows_per_second =
+				    (mddi_toshiba_rows_per_refresh * 1000 *
+				     num_vsyncs) / (elapsed_us / 1000);
+			}
+			/* start_time = timetick_get(); */
+			first_time = FALSE;
+			jiffies_to_timeval(jiffies, &start_time);
+			if (mddi_toshiba_report_refresh_measurements) {
+				(void)mddi_queue_register_read_int(VPOS,
+								   &mddi_toshiba_curr_vpos);
+				/* mdp_cnt_val = MDP_LINE_COUNT; */
+			}
+		}
+		/* if detected = TRUE, client initiated wakeup was detected */
+		if (mddi_toshiba_vsync_handler != NULL) {
+			(*mddi_toshiba_vsync_handler)
+			    (mddi_toshiba_vsync_handler_arg);
+			mddi_toshiba_vsync_handler = NULL;
+		}
+		mddi_vsync_detect_enabled = FALSE;
+		mddi_toshiba_vsync_attempts = 0;
+		/* need to disable the interrupt wakeup */
+		if (!mddi_queue_register_write_int(INTMSK, 0x0001))
+			MDDI_MSG_ERR("Vsync interrupt disable failed!\n");
+		if (!detected) {
+			/* give up after 5 failed attempts but show error */
+			MDDI_MSG_NOTICE("Vsync detection failed!\n");
+		} else if ((mddi_toshiba_monitor_refresh_value) &&
+			   (mddi_toshiba_report_refresh_measurements)) {
+			MDDI_MSG_NOTICE("  Last Line Counter=%d!\n",
+					mddi_toshiba_curr_vpos);
+		/* MDDI_MSG_NOTICE("  MDP Line Counter=%d!\n",mdp_cnt_val); */
+			MDDI_MSG_NOTICE("  Lines Per Second=%d!\n",
+					mddi_toshiba_rows_per_second);
+		}
+		/* clear the interrupt */
+		if (!mddi_queue_register_write_int(INTFLG, 0x0001))
+			MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+	} else {
+		/* if detected = FALSE, we woke up from hibernation, but did not
+		 * detect client initiated wakeup.
+		 */
+		mddi_toshiba_vsync_attempts++;
+	}
+}
+
+static void mddi_toshiba_prim_init(struct msm_fb_data_type *mfd)
+{
+
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		break;
+	case TOSHIBA_STATE_OFF:
+		toshiba_state = TOSHIBA_STATE_PRIM_SEC_STANDBY;
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_SEC_NORMAL_MODE:
+		toshiba_sec_cont_update_stop(mfd);
+		toshiba_sec_sleep_in(mfd);
+		toshiba_sec_sleep_out(mfd);
+		toshiba_sec_lcd_off(mfd);
+		toshiba_common_initial_setup(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_prim_init from state %d\n",
+			     toshiba_state);
+	}
+
+	toshiba_prim_start(mfd);
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+		gordon_disp_init();
+	mddi_host_write_pix_attr_reg(0x00C3);
+}
+
+static void mddi_toshiba_sec_init(struct msm_fb_data_type *mfd)
+{
+
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		break;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+		toshiba_prim_lcd_off(mfd);
+		toshiba_common_initial_setup(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_sec_init from state %d\n",
+			     toshiba_state);
+	}
+
+	toshiba_sec_start(mfd);
+	toshiba_sec_backlight_on(mfd);
+	toshiba_sec_cont_update_start(mfd);
+	mddi_host_write_pix_attr_reg(0x0400);
+}
+
+static void mddi_toshiba_lcd_powerdown(struct msm_fb_data_type *mfd)
+{
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		mddi_toshiba_prim_init(mfd);
+		mddi_toshiba_lcd_powerdown(mfd);
+		return;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		break;
+	case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+		toshiba_prim_lcd_off(mfd);
+		break;
+	case TOSHIBA_STATE_SEC_NORMAL_MODE:
+		toshiba_sec_cont_update_stop(mfd);
+		toshiba_sec_sleep_in(mfd);
+		toshiba_sec_sleep_out(mfd);
+		toshiba_sec_lcd_off(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_lcd_powerdown from state %d\n",
+			     toshiba_state);
+	}
+}
+
+static int mddi_sharpgordon_firsttime = 1;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	mfd = platform_get_drvdata(pdev);
+	if (!mfd)
+		return -ENODEV;
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (TM_GET_DID(mfd->panel.id) == TOSHIBA_VGA_PRIM)
+		mddi_toshiba_prim_init(mfd);
+	else
+		mddi_toshiba_sec_init(mfd);
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		if (mddi_sharpgordon_firsttime) {
+			mddi_sharpgordon_firsttime = 0;
+			write_client_reg(REGENB, 0x00000001, TRUE);
+		}
+	}
+	return 0;
+}
+
+static int mddi_toshiba_lcd_off(struct platform_device *pdev)
+{
+	mddi_toshiba_lcd_powerdown(platform_get_drvdata(pdev));
+	return 0;
+}
+
+static int __init mddi_toshiba_lcd_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		mddi_toshiba_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_toshiba_lcd_probe,
+	.driver = {
+		.name   = "mddi_toshiba",
+	},
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+	.on 		= mddi_toshiba_lcd_on,
+	.off 		= mddi_toshiba_lcd_off,
+};
+
+static int ch_used[3];
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+					u32 channel, u32 panel)
+{
+	struct platform_device *pdev = NULL;
+	int ret;
+
+	if ((channel >= 3) || ch_used[channel])
+		return -ENODEV;
+
+	if ((channel != TOSHIBA_VGA_PRIM) &&
+	    mddi_toshiba_pdata && mddi_toshiba_pdata->panel_num)
+		if (mddi_toshiba_pdata->panel_num() < 2)
+			return -ENODEV;
+
+	ch_used[channel] = TRUE;
+
+	pdev = platform_device_alloc("mddi_toshiba", (panel << 8)|channel);
+	if (!pdev)
+		return -ENOMEM;
+
+	if (channel == TOSHIBA_VGA_PRIM) {
+		toshiba_panel_data.set_backlight =
+				mddi_toshiba_lcd_set_backlight;
+
+		if (pinfo->lcd.vsync_enable) {
+			toshiba_panel_data.set_vsync_notifier =
+				mddi_toshiba_vsync_set_handler;
+			mddi_lcd.vsync_detected =
+				mddi_toshiba_lcd_vsync_detected;
+		}
+	} else {
+		toshiba_panel_data.set_backlight = NULL;
+		toshiba_panel_data.set_vsync_notifier = NULL;
+	}
+
+	toshiba_panel_data.panel_info = *pinfo;
+
+	ret = platform_device_add_data(pdev, &toshiba_panel_data,
+		sizeof(toshiba_panel_data));
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_add_data failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_register failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	return 0;
+
+err_device_put:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int __init mddi_toshiba_lcd_init(void)
+{
+	return platform_driver_register(&this_driver);
+}
+
+module_init(mddi_toshiba_lcd_init);
diff --git a/drivers/staging/msm/mddi_toshiba.h b/drivers/staging/msm/mddi_toshiba.h
new file mode 100644
index 00000000000..2d22b9a2c41
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.h
@@ -0,0 +1,52 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDI_TOSHIBA_H
+#define MDDI_TOSHIBA_H
+
+#define TOSHIBA_VGA_PRIM 1
+#define TOSHIBA_VGA_SECD 2
+
+#define LCD_TOSHIBA_2P4_VGA 	0
+#define LCD_TOSHIBA_2P4_WVGA 	1
+#define LCD_TOSHIBA_2P4_WVGA_PT	2
+#define LCD_SHARP_2P4_VGA 	3
+
+#define GPIO_BLOCK_BASE        0x150000
+#define SYSTEM_BLOCK2_BASE     0x170000
+
+#define GPIODIR     (GPIO_BLOCK_BASE|0x04)
+#define GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
+#define GPIOPC      (GPIO_BLOCK_BASE|0x28)
+#define GPIODATA    (GPIO_BLOCK_BASE|0x00)
+
+#define write_client_reg(__X, __Y, __Z) {\
+  mddi_queue_register_write(__X, __Y, TRUE, 0);\
+}
+
+#endif /* MDDI_TOSHIBA_H */
diff --git a/drivers/staging/msm/mddi_toshiba_vga.c b/drivers/staging/msm/mddi_toshiba_vga.c
new file mode 100644
index 00000000000..7e61d3a5b8f
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_vga.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static uint32 read_client_reg(uint32 addr)
+{
+	uint32 val;
+	mddi_queue_register_read(addr, &val, TRUE, 0);
+	return val;
+}
+
+static uint32 toshiba_lcd_gpio_read(void)
+{
+	uint32 val;
+
+	write_client_reg(GPIODIR, 0x0000000C, TRUE);
+	write_client_reg(GPIOSEL, 0x00000000, TRUE);
+	write_client_reg(GPIOSEL, 0x00000000, TRUE);
+	write_client_reg(GPIOPC, 0x03CF00C0, TRUE);
+	val = read_client_reg(GPIODATA) & 0x2C0;
+
+	return val;
+}
+
+static u32 mddi_toshiba_panel_detect(void)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	uint32 lcd_gpio;
+	u32 mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+
+	/* Toshiba display requires larger drive_lo value */
+	mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+	lcd_gpio = toshiba_lcd_gpio_read();
+	switch (lcd_gpio) {
+	case 0x0080:
+		mddi_toshiba_lcd = LCD_SHARP_2P4_VGA;
+		break;
+
+	case 0x00C0:
+	default:
+		mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+		break;
+	}
+
+	return mddi_toshiba_lcd;
+}
+
+static int __init mddi_toshiba_vga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+	u32 panel;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_toshiba_vga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+		if ((id >> 16) != 0xD263)
+			return 0;
+	}
+#endif
+
+	panel = mddi_toshiba_panel_detect();
+
+	pinfo.xres = 480;
+	pinfo.yres = 640;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = TRUE;
+	pinfo.lcd.refx100 = 6118;
+	pinfo.lcd.v_back_porch = 6;
+	pinfo.lcd.v_front_porch = 0;
+	pinfo.lcd.v_pulse_width = 0;
+	pinfo.lcd.hw_vsync_mode = FALSE;
+	pinfo.lcd.vsync_notifier_period = (1 * HZ);
+	pinfo.bl_max = 99;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 122880000;
+	pinfo.clk_min =  120000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM, panel);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		return ret;
+	}
+
+	pinfo.xres = 176;
+	pinfo.yres = 220;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_2;
+	pinfo.mddi.vdopkt = 0x400;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.clk_rate = 122880000;
+	pinfo.clk_min =  120000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_SECD, panel);
+	if (ret)
+		printk(KERN_WARNING
+			"%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(mddi_toshiba_vga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga.c b/drivers/staging/msm/mddi_toshiba_wvga.c
new file mode 100644
index 00000000000..557b0f08faf
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("mddi_toshiba_wvga"))
+		return 0;
+#endif
+
+	pinfo.xres = 800;
+	pinfo.yres = 480;
+	pinfo.pdest = DISPLAY_2;
+	pinfo.type = MDDI_PANEL;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = TRUE;
+	pinfo.lcd.refx100 = 6118;
+	pinfo.lcd.v_back_porch = 6;
+	pinfo.lcd.v_front_porch = 0;
+	pinfo.lcd.v_pulse_width = 0;
+	pinfo.lcd.hw_vsync_mode = FALSE;
+	pinfo.lcd.vsync_notifier_period = (1 * HZ);
+	pinfo.bl_max = 4;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 192000000;
+	pinfo.clk_min =  190000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+					   LCD_TOSHIBA_2P4_WVGA);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+module_init(mddi_toshiba_wvga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga_pt.c b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
new file mode 100644
index 00000000000..fc7d4e0d294
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_pt_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	uint id;
+
+	ret = msm_fb_detect_client("mddi_toshiba_wvga_pt");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+		if (id != 0xd2638722)
+			return 0;
+	}
+#endif
+
+	pinfo.xres = 480;
+	pinfo.yres = 800;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = FALSE;
+	pinfo.bl_max = 15;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 192000000;
+	pinfo.clk_min =  190000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+						LCD_TOSHIBA_2P4_WVGA_PT);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(mddi_toshiba_wvga_pt_init);
diff --git a/drivers/staging/msm/mddihost.c b/drivers/staging/msm/mddihost.c
new file mode 100644
index 00000000000..c6c1ee4eda0
--- /dev/null
+++ b/drivers/staging/msm/mddihost.c
@@ -0,0 +1,377 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+struct semaphore mddi_host_mutex;
+
+struct clk *mddi_io_clk;
+static boolean mddi_host_powered = FALSE;
+static boolean mddi_host_initialized = FALSE;
+extern uint32 *mddi_reg_read_value_ptr;
+
+mddi_lcd_func_type mddi_lcd;
+
+extern mddi_client_capability_type mddi_client_capability_pkt;
+
+#ifdef FEATURE_MDDI_HITACHI
+extern void mddi_hitachi_window_adjust(uint16 x1,
+				       uint16 x2, uint16 y1, uint16 y2);
+#endif
+
+extern void mddi_toshiba_lcd_init(void);
+
+#ifdef FEATURE_MDDI_S6D0142
+extern void mddi_s6d0142_lcd_init(void);
+extern void mddi_s6d0142_window_adjust(uint16 x1,
+				       uint16 x2,
+				       uint16 y1,
+				       uint16 y2,
+				       mddi_llist_done_cb_type done_cb);
+#endif
+
+void mddi_init(void)
+{
+	if (mddi_host_initialized)
+		return;
+
+	mddi_host_initialized = TRUE;
+
+	init_MUTEX(&mddi_host_mutex);
+
+	if (!mddi_host_powered) {
+		down(&mddi_host_mutex);
+		mddi_host_init(MDDI_HOST_PRIM);
+		mddi_host_powered = TRUE;
+		up(&mddi_host_mutex);
+		mdelay(10);
+	}
+}
+
+int mddi_host_register_read(uint32 reg_addr,
+     uint32 *reg_value_ptr, boolean wait, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+	int ret = 0;
+
+	if (in_interrupt())
+		MDDI_MSG_CRIT("Called from ISR context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		mddi_init();
+	}
+
+	down(&mddi_host_mutex);
+
+	mddi_reg_read_value_ptr = reg_value_ptr;
+	curr_llist_idx = mddi_get_reg_read_llist_item(host, TRUE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+
+		/* need to change this to some sort of wait */
+		MDDI_MSG_ERR("Attempting to queue up more than 1 reg read\n");
+		return -EINVAL;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_ptr->link_controller_flags = 0x11;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 0;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->packet_data_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x8001;
+	regacc_pkt_ptr->register_address = reg_addr;
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+				   NULL, host);
+	/* need to check if we can write the pointer or not */
+
+	up(&mddi_host_mutex);
+
+	if (wait) {
+		int wait_ret;
+
+		mddi_linked_list_notify_type *llist_notify_ptr;
+		llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+		wait_ret = wait_for_completion_timeout(
+					&(llist_notify_ptr->done_comp), 5 * HZ);
+
+		if (wait_ret <= 0)
+			ret = -EBUSY;
+
+		if (wait_ret < 0)
+			printk(KERN_ERR "%s: failed to wait for completion!\n",
+				__func__);
+		else if (!wait_ret)
+			printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+	}
+
+	MDDI_MSG_DEBUG("Reg Read value=0x%x\n", *reg_value_ptr);
+
+	return ret;
+}				/* mddi_host_register_read */
+
+int mddi_host_register_write(uint32 reg_addr,
+     uint32 reg_val, enum mddi_data_packet_size_type packet_size,
+     boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_linked_list_type *curr_llist_dma_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+	int ret = 0;
+
+	if (in_interrupt())
+		MDDI_MSG_CRIT("Called from ISR context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		mddi_init();
+	}
+
+	down(&mddi_host_mutex);
+
+	curr_llist_idx = mddi_get_next_free_llist_item(host, TRUE);
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+	curr_llist_ptr->link_controller_flags = 1;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 4;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count +
+					(uint16)packet_size;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x0001;
+	regacc_pkt_ptr->register_address = reg_addr;
+	regacc_pkt_ptr->register_data_list = reg_val;
+
+	MDDI_MSG_DEBUG("Reg Access write reg=0x%x, value=0x%x\n",
+		       regacc_pkt_ptr->register_address,
+		       regacc_pkt_ptr->register_data_list);
+
+	regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+	curr_llist_ptr->packet_data_pointer =
+	    (void *)(&regacc_pkt_ptr->register_data_list);
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+				   done_cb, host);
+
+	up(&mddi_host_mutex);
+
+	if (wait) {
+		int wait_ret;
+
+		mddi_linked_list_notify_type *llist_notify_ptr;
+		llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+		wait_ret = wait_for_completion_timeout(
+					&(llist_notify_ptr->done_comp), 5 * HZ);
+
+		if (wait_ret <= 0)
+			ret = -EBUSY;
+
+		if (wait_ret < 0)
+			printk(KERN_ERR "%s: failed to wait for completion!\n",
+				__func__);
+		else if (!wait_ret)
+			printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+	}
+
+	return ret;
+}				/* mddi_host_register_write */
+
+boolean mddi_host_register_read_int
+    (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+
+	if (!in_interrupt())
+		MDDI_MSG_CRIT("Called from TASK context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		return FALSE;
+	}
+
+	if (down_trylock(&mddi_host_mutex) != 0)
+		return FALSE;
+
+	mddi_reg_read_value_ptr = reg_value_ptr;
+	curr_llist_idx = mddi_get_reg_read_llist_item(host, FALSE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+		return FALSE;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_ptr->link_controller_flags = 0x11;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 0;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->packet_data_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x8001;
+	regacc_pkt_ptr->register_address = reg_addr;
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+				   NULL, host);
+	/* need to check if we can write the pointer or not */
+
+	up(&mddi_host_mutex);
+
+	return TRUE;
+
+}				/* mddi_host_register_read */
+
+boolean mddi_host_register_write_int
+    (uint32 reg_addr,
+     uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_linked_list_type *curr_llist_dma_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+
+	if (!in_interrupt())
+		MDDI_MSG_CRIT("Called from TASK context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		return FALSE;
+	}
+
+	if (down_trylock(&mddi_host_mutex) != 0)
+		return FALSE;
+
+	curr_llist_idx = mddi_get_next_free_llist_item(host, FALSE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+		return FALSE;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+	curr_llist_ptr->link_controller_flags = 1;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 4;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count + 4;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x0001;
+	regacc_pkt_ptr->register_address = reg_addr;
+	regacc_pkt_ptr->register_data_list = reg_val;
+
+	regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+	curr_llist_ptr->packet_data_pointer =
+	    (void *)(&(regacc_pkt_ptr->register_data_list));
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+				   done_cb, host);
+	up(&mddi_host_mutex);
+
+	return TRUE;
+
+}				/* mddi_host_register_write */
+
+void mddi_wait(uint16 time_ms)
+{
+	mdelay(time_ms);
+}
+
+void mddi_client_lcd_vsync_detected(boolean detected)
+{
+	if (mddi_lcd.vsync_detected)
+		(*mddi_lcd.vsync_detected) (detected);
+}
+
+/* extended version of function includes done callback */
+void mddi_window_adjust_ext(struct msm_fb_data_type *mfd,
+			    uint16 x1,
+			    uint16 x2,
+			    uint16 y1,
+			    uint16 y2, mddi_llist_done_cb_type done_cb)
+{
+#ifdef FEATURE_MDDI_HITACHI
+	if (mfd->panel.id == HITACHI)
+		mddi_hitachi_window_adjust(x1, x2, y1, y2);
+#elif defined(FEATURE_MDDI_S6D0142)
+	if (mfd->panel.id == MDDI_LCD_S6D0142)
+		mddi_s6d0142_window_adjust(x1, x2, y1, y2, done_cb);
+#else
+	/* Do nothing then... except avoid lint/compiler warnings */
+	(void)x1;
+	(void)x2;
+	(void)y1;
+	(void)y2;
+	(void)done_cb;
+#endif
+}
+
+void mddi_window_adjust(struct msm_fb_data_type *mfd,
+			uint16 x1, uint16 x2, uint16 y1, uint16 y2)
+{
+	mddi_window_adjust_ext(mfd, x1, x2, y1, y2, NULL);
+}
diff --git a/drivers/staging/msm/mddihost.h b/drivers/staging/msm/mddihost.h
new file mode 100644
index 00000000000..20b817841c4
--- /dev/null
+++ b/drivers/staging/msm/mddihost.h
@@ -0,0 +1,225 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOST_H
+#define MDDIHOST_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+
+#undef FEATURE_MDDI_MC4
+#undef FEATURE_MDDI_S6D0142
+#undef FEATURE_MDDI_HITACHI
+#define FEATURE_MDDI_SHARP
+#define FEATURE_MDDI_TOSHIBA
+#undef FEATURE_MDDI_E751
+#define FEATURE_MDDI_CORONA
+#define FEATURE_MDDI_PRISM
+
+#define T_MSM7500
+
+typedef enum {
+	format_16bpp,
+	format_18bpp,
+	format_24bpp
+} mddi_video_format;
+
+typedef enum {
+	MDDI_LCD_NONE = 0,
+	MDDI_LCD_MC4,
+	MDDI_LCD_S6D0142,
+	MDDI_LCD_SHARP,
+	MDDI_LCD_E751,
+	MDDI_LCD_CORONA,
+	MDDI_LCD_HITACHI,
+	MDDI_LCD_TOSHIBA,
+	MDDI_LCD_PRISM,
+	MDDI_LCD_TP2,
+	MDDI_NUM_LCD_TYPES,
+	MDDI_LCD_DEFAULT = MDDI_LCD_TOSHIBA
+} mddi_lcd_type;
+
+typedef enum {
+	MDDI_HOST_PRIM = 0,
+	MDDI_HOST_EXT,
+	MDDI_NUM_HOST_CORES
+} mddi_host_type;
+
+typedef enum {
+	MDDI_DRIVER_RESET,	/* host core registers have not been written. */
+	MDDI_DRIVER_DISABLED,	/* registers written, interrupts disabled. */
+	MDDI_DRIVER_ENABLED	/* registers written, interrupts enabled. */
+} mddi_host_driver_state_type;
+
+typedef enum {
+	MDDI_GPIO_INT_0 = 0,
+	MDDI_GPIO_INT_1,
+	MDDI_GPIO_INT_2,
+	MDDI_GPIO_INT_3,
+	MDDI_GPIO_INT_4,
+	MDDI_GPIO_INT_5,
+	MDDI_GPIO_INT_6,
+	MDDI_GPIO_INT_7,
+	MDDI_GPIO_INT_8,
+	MDDI_GPIO_INT_9,
+	MDDI_GPIO_INT_10,
+	MDDI_GPIO_INT_11,
+	MDDI_GPIO_INT_12,
+	MDDI_GPIO_INT_13,
+	MDDI_GPIO_INT_14,
+	MDDI_GPIO_INT_15,
+	MDDI_GPIO_NUM_INTS
+} mddi_gpio_int_type;
+
+enum mddi_data_packet_size_type {
+	MDDI_DATA_PACKET_4_BYTES  = 4,
+	MDDI_DATA_PACKET_8_BYTES  = 8,
+	MDDI_DATA_PACKET_12_BYTES = 12,
+	MDDI_DATA_PACKET_16_BYTES = 16,
+	MDDI_DATA_PACKET_24_BYTES = 24
+};
+
+typedef struct {
+	uint32 addr;
+	uint32 value;
+} mddi_reg_write_type;
+
+boolean mddi_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg);
+
+typedef void (*mddi_llist_done_cb_type) (void);
+
+typedef void (*mddi_rev_handler_type) (void *);
+
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type);
+
+#define MDDI_DEFAULT_PRIM_PIX_ATTR 0xC3
+#define MDDI_DEFAULT_SECD_PIX_ATTR 0xC0
+
+typedef int gpio_int_polarity_type;
+typedef int gpio_int_handler_type;
+
+typedef struct {
+	void (*vsync_detected) (boolean);
+} mddi_lcd_func_type;
+
+extern mddi_lcd_func_type mddi_lcd;
+void mddi_init(void);
+
+void mddi_powerdown(void);
+
+void mddi_host_start_ext_display(void);
+void mddi_host_stop_ext_display(void);
+
+extern spinlock_t mddi_host_spin_lock;
+#ifdef T_MSM7500
+void mddi_reset(void);
+#ifdef FEATURE_DUAL_PROC_MODEM_DISPLAY
+void mddi_host_switch_proc_control(boolean on);
+#endif
+#endif
+void mddi_host_exit_power_collapse(void);
+
+void mddi_queue_splash_screen
+    (void *buf_ptr,
+     boolean clear_area,
+     int16 src_width,
+     int16 src_starting_row,
+     int16 src_starting_column,
+     int16 num_of_rows,
+     int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+void mddi_queue_image
+    (void *buf_ptr,
+     uint8 stereo_video,
+     boolean clear_area,
+     int16 src_width,
+     int16 src_starting_row,
+     int16 src_starting_column,
+     int16 num_of_rows,
+     int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+int mddi_host_register_read
+    (uint32 reg_addr,
+     uint32 *reg_value_ptr, boolean wait, mddi_host_type host_idx);
+int mddi_host_register_write
+    (uint32 reg_addr, uint32 reg_val,
+     enum mddi_data_packet_size_type packet_size,
+     boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_write_int
+    (uint32 reg_addr,
+     uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_read_int
+    (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host_idx);
+void mddi_queue_register_write_static
+    (uint32 reg_addr,
+     uint32 reg_val, boolean wait, mddi_llist_done_cb_type done_cb);
+void mddi_queue_static_window_adjust
+    (const mddi_reg_write_type *reg_write,
+     uint16 num_writes, mddi_llist_done_cb_type done_cb);
+
+#define mddi_queue_register_read(reg, val_ptr, wait, sig) \
+	mddi_host_register_read(reg, val_ptr, wait, MDDI_HOST_PRIM)
+#define mddi_queue_register_write(reg, val, wait, sig) \
+	mddi_host_register_write(reg, val, MDDI_DATA_PACKET_4_BYTES,\
+	wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_extn(reg, val, pkt_size, wait, sig) \
+	mddi_host_register_write(reg, val, pkt_size, \
+	wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_int(reg, val) \
+	mddi_host_register_write_int(reg, val, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_read_int(reg, val_ptr) \
+	mddi_host_register_read_int(reg, val_ptr, MDDI_HOST_PRIM)
+#define mddi_queue_register_writes(reg_ptr, val, wait, sig) \
+	mddi_host_register_writes(reg_ptr, val, wait, sig, MDDI_HOST_PRIM)
+
+void mddi_wait(uint16 time_ms);
+void mddi_assign_max_pkt_dimensions(uint16 image_cols,
+				    uint16 image_rows,
+				    uint16 bpp,
+				    uint16 *max_cols, uint16 * max_rows);
+uint16 mddi_assign_pkt_height(uint16 pkt_width, uint16 pkt_height, uint16 bpp);
+void mddi_queue_reverse_encapsulation(boolean wait);
+void mddi_disable(int lock);
+#endif /* MDDIHOST_H */
diff --git a/drivers/staging/msm/mddihost_e.c b/drivers/staging/msm/mddihost_e.c
new file mode 100644
index 00000000000..7de5eda71ce
--- /dev/null
+++ b/drivers/staging/msm/mddihost_e.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+extern struct semaphore mddi_host_mutex;
+static boolean mddi_host_ext_powered = FALSE;
+
+void mddi_host_start_ext_display(void)
+{
+	down(&mddi_host_mutex);
+
+	if (!mddi_host_ext_powered) {
+		mddi_host_init(MDDI_HOST_EXT);
+
+		mddi_host_ext_powered = TRUE;
+	}
+
+	up(&mddi_host_mutex);
+}
+
+void mddi_host_stop_ext_display(void)
+{
+	down(&mddi_host_mutex);
+
+	if (mddi_host_ext_powered) {
+		mddi_host_powerdown(MDDI_HOST_EXT);
+
+		mddi_host_ext_powered = FALSE;
+	}
+
+	up(&mddi_host_mutex);
+}
diff --git a/drivers/staging/msm/mddihosti.c b/drivers/staging/msm/mddihosti.c
new file mode 100644
index 00000000000..f9d6e91e8d5
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.c
@@ -0,0 +1,2239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define FEATURE_MDDI_UNDERRUN_RECOVERY
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr);
+#endif
+
+struct timer_list mddi_host_timer;
+
+#define MDDI_DEFAULT_TIMER_LENGTH 5000	/* 5 seconds */
+uint32 mddi_rtd_frequency = 60000;	/* send RTD every 60 seconds */
+uint32 mddi_client_status_frequency = 60000;	/* get status pkt every 60 secs */
+
+boolean mddi_vsync_detect_enabled = FALSE;
+mddi_gpio_info_type mddi_gpio;
+
+uint32 mddi_host_core_version;
+boolean mddi_debug_log_statistics = FALSE;
+/* #define FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION */
+/* default to TRUE in case MDP does not vote */
+static boolean mddi_host_mdp_active_flag = TRUE;
+static uint32 mddi_log_stats_counter;
+uint32 mddi_log_stats_frequency = 4000;
+
+#define MDDI_DEFAULT_REV_PKT_SIZE            0x20
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static boolean mddi_rev_ptr_workaround = TRUE;
+static uint32 mddi_reg_read_retry;
+static uint32 mddi_reg_read_retry_max = 20;
+static boolean mddi_enable_reg_read_retry = TRUE;
+static boolean mddi_enable_reg_read_retry_once = FALSE;
+
+#define MDDI_MAX_REV_PKT_SIZE                0x60
+
+#define MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE  0x60
+
+#define MDDI_VIDEO_REV_PKT_SIZE              0x40
+#define MDDI_REV_BUFFER_SIZE  MDDI_MAX_REV_PKT_SIZE
+static byte rev_packet_data[MDDI_MAX_REV_PKT_SIZE];
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+/* leave these variables so graphics will compile */
+
+#define MDDI_MAX_REV_DATA_SIZE  128
+/*lint -d__align(x) */
+boolean mddi_debug_clear_rev_data = TRUE;
+
+uint32 *mddi_reg_read_value_ptr;
+
+mddi_client_capability_type mddi_client_capability_pkt;
+static boolean mddi_client_capability_request = FALSE;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+
+#define MAX_MDDI_REV_HANDLERS 2
+#define INVALID_PKT_TYPE 0xFFFF
+
+typedef struct {
+	mddi_rev_handler_type handler;	/* ISR to be executed */
+	uint16 pkt_type;
+} mddi_rev_pkt_handler_type;
+static mddi_rev_pkt_handler_type mddi_rev_pkt_handler[MAX_MDDI_REV_HANDLERS] =
+    { {NULL, INVALID_PKT_TYPE}, {NULL, INVALID_PKT_TYPE} };
+
+static boolean mddi_rev_encap_user_request = FALSE;
+static mddi_linked_list_notify_type mddi_rev_user;
+
+spinlock_t mddi_host_spin_lock;
+extern uint32 mdp_in_processing;
+#endif
+
+typedef enum {
+	MDDI_REV_IDLE
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	    , MDDI_REV_REG_READ_ISSUED,
+	MDDI_REV_REG_READ_SENT,
+	MDDI_REV_ENCAP_ISSUED,
+	MDDI_REV_STATUS_REQ_ISSUED,
+	MDDI_REV_CLIENT_CAP_ISSUED
+#endif
+} mddi_rev_link_state_type;
+
+typedef enum {
+	MDDI_LINK_DISABLED,
+	MDDI_LINK_HIBERNATING,
+	MDDI_LINK_ACTIVATING,
+	MDDI_LINK_ACTIVE
+} mddi_host_link_state_type;
+
+typedef struct {
+	uint32 count;
+	uint32 in_count;
+	uint32 disp_req_count;
+	uint32 state_change_count;
+	uint32 ll_done_count;
+	uint32 rev_avail_count;
+	uint32 error_count;
+	uint32 rev_encap_count;
+	uint32 llist_ptr_write_1;
+	uint32 llist_ptr_write_2;
+} mddi_host_int_type;
+
+typedef struct {
+	uint32 fwd_crc_count;
+	uint32 rev_crc_count;
+	uint32 pri_underflow;
+	uint32 sec_underflow;
+	uint32 rev_overflow;
+	uint32 pri_overwrite;
+	uint32 sec_overwrite;
+	uint32 rev_overwrite;
+	uint32 dma_failure;
+	uint32 rtd_failure;
+	uint32 reg_read_failure;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+	uint32 pri_underrun_detected;
+#endif
+} mddi_host_stat_type;
+
+typedef struct {
+	uint32 rtd_cnt;
+	uint32 rev_enc_cnt;
+	uint32 vid_cnt;
+	uint32 reg_acc_cnt;
+	uint32 cli_stat_cnt;
+	uint32 cli_cap_cnt;
+	uint32 reg_read_cnt;
+	uint32 link_active_cnt;
+	uint32 link_hibernate_cnt;
+	uint32 vsync_response_cnt;
+	uint32 fwd_crc_cnt;
+	uint32 rev_crc_cnt;
+} mddi_log_params_struct_type;
+
+typedef struct {
+	uint32 rtd_value;
+	uint32 rtd_counter;
+	uint32 client_status_cnt;
+	boolean rev_ptr_written;
+	uint8 *rev_ptr_start;
+	uint8 *rev_ptr_curr;
+	uint32 mddi_rev_ptr_write_val;
+	dma_addr_t rev_data_dma_addr;
+	uint16 rev_pkt_size;
+	mddi_rev_link_state_type rev_state;
+	mddi_host_link_state_type link_state;
+	mddi_host_driver_state_type driver_state;
+	boolean disable_hibernation;
+	uint32 saved_int_reg;
+	uint32 saved_int_en;
+	mddi_linked_list_type *llist_ptr;
+	dma_addr_t llist_dma_addr;
+	mddi_linked_list_type *llist_dma_ptr;
+	uint32 *rev_data_buf;
+	struct completion mddi_llist_avail_comp;
+	boolean mddi_waiting_for_llist_avail;
+	mddi_host_int_type int_type;
+	mddi_host_stat_type stats;
+	mddi_log_params_struct_type log_parms;
+	mddi_llist_info_type llist_info;
+	mddi_linked_list_notify_type llist_notify[MDDI_MAX_NUM_LLIST_ITEMS];
+} mddi_host_cntl_type;
+
+static mddi_host_type mddi_curr_host = MDDI_HOST_PRIM;
+static mddi_host_cntl_type mhctl[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_dma_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_notify_type *llist_extern_notify[MDDI_NUM_HOST_CORES];
+static mddi_log_params_struct_type prev_parms[MDDI_NUM_HOST_CORES];
+
+extern uint32 mdp_total_vdopkts;
+
+static boolean mddi_host_io_clock_on = FALSE;
+static boolean mddi_host_hclk_on = FALSE;
+
+int int_mddi_pri_flag = FALSE;
+int int_mddi_ext_flag = FALSE;
+
+static void mddi_report_errors(uint32 int_reg)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (int_reg & MDDI_INT_PRI_UNDERFLOW) {
+		pmhctl->stats.pri_underflow++;
+		MDDI_MSG_ERR("!!! MDDI Primary Underflow !!!\n");
+	}
+	if (int_reg & MDDI_INT_SEC_UNDERFLOW) {
+		pmhctl->stats.sec_underflow++;
+		MDDI_MSG_ERR("!!! MDDI Secondary Underflow !!!\n");
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_OVERFLOW) {
+		pmhctl->stats.rev_overflow++;
+		MDDI_MSG_ERR("!!! MDDI Reverse Overflow !!!\n");
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+		mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+
+	}
+	if (int_reg & MDDI_INT_CRC_ERROR)
+		MDDI_MSG_ERR("!!! MDDI Reverse CRC Error !!!\n");
+#endif
+	if (int_reg & MDDI_INT_PRI_OVERWRITE) {
+		pmhctl->stats.pri_overwrite++;
+		MDDI_MSG_ERR("!!! MDDI Primary Overwrite !!!\n");
+	}
+	if (int_reg & MDDI_INT_SEC_OVERWRITE) {
+		pmhctl->stats.sec_overwrite++;
+		MDDI_MSG_ERR("!!! MDDI Secondary Overwrite !!!\n");
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_OVERWRITE) {
+		pmhctl->stats.rev_overwrite++;
+		/* This will show up normally and is not a problem */
+		MDDI_MSG_DEBUG("MDDI Reverse Overwrite!\n");
+	}
+	if (int_reg & MDDI_INT_RTD_FAILURE) {
+		mddi_host_reg_outm(INTEN, MDDI_INT_RTD_FAILURE, 0);
+		pmhctl->stats.rtd_failure++;
+		MDDI_MSG_ERR("!!! MDDI RTD Failure !!!\n");
+	}
+#endif
+	if (int_reg & MDDI_INT_DMA_FAILURE) {
+		pmhctl->stats.dma_failure++;
+		MDDI_MSG_ERR("!!! MDDI DMA Abort !!!\n");
+	}
+}
+
+static void mddi_host_enable_io_clock(void)
+{
+	if (!MDDI_HOST_IS_IO_CLOCK_ON)
+		MDDI_HOST_ENABLE_IO_CLOCK;
+}
+
+static void mddi_host_enable_hclk(void)
+{
+
+	if (!MDDI_HOST_IS_HCLK_ON)
+		MDDI_HOST_ENABLE_HCLK;
+}
+
+static void mddi_host_disable_io_clock(void)
+{
+#ifndef FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+	if (MDDI_HOST_IS_IO_CLOCK_ON)
+		MDDI_HOST_DISABLE_IO_CLOCK;
+#endif
+}
+
+static void mddi_host_disable_hclk(void)
+{
+#ifndef FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+	if (MDDI_HOST_IS_HCLK_ON)
+		MDDI_HOST_DISABLE_HCLK;
+#endif
+}
+
+static void mddi_vote_to_sleep(mddi_host_type host_idx, boolean sleep)
+{
+	uint16 vote_mask;
+
+	if (host_idx == MDDI_HOST_PRIM)
+		vote_mask = 0x01;
+	else
+		vote_mask = 0x02;
+}
+
+static void mddi_report_state_change(uint32 int_reg)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if ((pmhctl->saved_int_reg & MDDI_INT_IN_HIBERNATION) &&
+	    (pmhctl->saved_int_reg & MDDI_INT_LINK_ACTIVE)) {
+		/* recover from condition where the io_clock was turned off by the
+		   clock driver during a transition to hibernation. The io_clock
+		   disable is to prevent MDP/MDDI underruns when changing ARM
+		   clock speeds. In the process of halting the ARM, the hclk
+		   divider needs to be set to 1. When it is set to 1, there is
+		   a small time (usecs) when hclk is off or slow, and this can
+		   cause an underrun. To prevent the underrun, clock driver turns
+		   off the MDDI io_clock before making the change. */
+		mddi_host_reg_out(CMD, MDDI_CMD_POWERUP);
+	}
+
+	if (int_reg & MDDI_INT_LINK_ACTIVE) {
+		pmhctl->link_state = MDDI_LINK_ACTIVE;
+		pmhctl->log_parms.link_active_cnt++;
+		pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+		MDDI_MSG_DEBUG("!!! MDDI Active RTD:0x%x!!!\n",
+			       pmhctl->rtd_value);
+		/* now interrupt on hibernation */
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   MDDI_INT_IN_HIBERNATION);
+
+#ifdef DEBUG_MDDIHOSTI
+		/* if gpio interrupt is enabled, start polling at fastest
+		 * registered rate
+		 */
+		if (mddi_gpio.polling_enabled) {
+			timer_reg(&mddi_gpio_poll_timer,
+		mddi_gpio_poll_timer_cb, 0, mddi_gpio.polling_interval, 0);
+		}
+#endif
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (mddi_rev_ptr_workaround) {
+			/* HW CR: need to reset reverse register stuff */
+			pmhctl->rev_ptr_written = FALSE;
+			pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+		}
+#endif
+		/* vote on sleep */
+		mddi_vote_to_sleep(host_idx, FALSE);
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (mddi_vsync_detect_enabled) {
+				/*
+				 * Indicate to client specific code that vsync
+				 * was enabled, but we did not detect a client
+				 * intiated wakeup. The client specific
+				 * handler can either reassert vsync detection,
+				 * or treat this as a valid vsync.
+				 */
+				mddi_client_lcd_vsync_detected(FALSE);
+				pmhctl->log_parms.vsync_response_cnt++;
+			}
+		}
+	}
+	if (int_reg & MDDI_INT_IN_HIBERNATION) {
+		pmhctl->link_state = MDDI_LINK_HIBERNATING;
+		pmhctl->log_parms.link_hibernate_cnt++;
+		MDDI_MSG_DEBUG("!!! MDDI Hibernating !!!\n");
+		/* now interrupt on link_active */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_MDDI_IN |
+				    MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   MDDI_INT_LINK_ACTIVE);
+#else
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_MDDI_IN |
+				    MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   (MDDI_INT_MDDI_IN | MDDI_INT_LINK_ACTIVE));
+
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+
+		if (pmhctl->rev_state != MDDI_REV_IDLE) {
+			/* a rev_encap will not wake up the link, so we do that here */
+			pmhctl->link_state = MDDI_LINK_ACTIVATING;
+			mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+		}
+#endif
+
+		if (pmhctl->disable_hibernation) {
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+			mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			pmhctl->link_state = MDDI_LINK_ACTIVATING;
+		}
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+		if ((pmhctl->llist_info.transmitting_start_idx !=
+		     UNASSIGNED_INDEX)
+		    &&
+		    ((pmhctl->
+		      saved_int_reg & (MDDI_INT_PRI_LINK_LIST_DONE |
+				       MDDI_INT_PRI_PTR_READ)) ==
+		     MDDI_INT_PRI_PTR_READ)) {
+			mddi_linked_list_type *llist_dma;
+			llist_dma = pmhctl->llist_dma_ptr;
+			/*
+			 * All indications are that we have not received a
+			 * linked list done interrupt, due to an underrun
+			 * condition. Recovery attempt is to send again.
+			 */
+			dma_coherent_pre_ops();
+			/* Write to primary pointer register again */
+			mddi_host_reg_out(PRI_PTR,
+					  &llist_dma[pmhctl->llist_info.
+						     transmitting_start_idx]);
+			pmhctl->stats.pri_underrun_detected++;
+		}
+#endif
+
+		/* vote on sleep */
+		if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+			mddi_vote_to_sleep(host_idx, TRUE);
+		}
+
+#ifdef DEBUG_MDDIHOSTI
+		/* need to stop polling timer */
+		if (mddi_gpio.polling_enabled) {
+			(void) timer_clr(&mddi_gpio_poll_timer, T_NONE);
+		}
+#endif
+	}
+}
+
+void mddi_host_timer_service(unsigned long data)
+{
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	unsigned long flags;
+#endif
+	mddi_host_type host_idx;
+	mddi_host_cntl_type *pmhctl;
+
+	unsigned long time_ms = MDDI_DEFAULT_TIMER_LENGTH;
+	init_timer(&mddi_host_timer);
+	mddi_host_timer.function = mddi_host_timer_service;
+	mddi_host_timer.data = 0;
+
+	mddi_host_timer.expires = jiffies + ((time_ms * HZ) / 1000);
+	add_timer(&mddi_host_timer);
+
+	for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+	     host_idx++) {
+		pmhctl = &(mhctl[host_idx]);
+		mddi_log_stats_counter += (uint32) time_ms;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		pmhctl->rtd_counter += (uint32) time_ms;
+		pmhctl->client_status_cnt += (uint32) time_ms;
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (pmhctl->client_status_cnt >=
+			    mddi_client_status_frequency) {
+				if ((pmhctl->link_state ==
+				     MDDI_LINK_HIBERNATING)
+				    && (pmhctl->client_status_cnt >
+					mddi_client_status_frequency)) {
+					/*
+					 * special case where we are hibernating
+					 * and mddi_host_isr is not firing, so
+					 * kick the link so that the status can
+					 * be retrieved
+					 */
+
+					/* need to wake up link before issuing
+					 * rev encap command
+					 */
+					MDDI_MSG_INFO("wake up link!\n");
+					spin_lock_irqsave(&mddi_host_spin_lock,
+							  flags);
+					mddi_host_enable_hclk();
+					mddi_host_enable_io_clock();
+					pmhctl->link_state =
+					    MDDI_LINK_ACTIVATING;
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_LINK_ACTIVE);
+					spin_unlock_irqrestore
+					    (&mddi_host_spin_lock, flags);
+				} else
+				    if ((pmhctl->link_state == MDDI_LINK_ACTIVE)
+					&& pmhctl->disable_hibernation) {
+					/*
+					 * special case where we have disabled
+					 * hibernation and mddi_host_isr
+					 * is not firing, so enable interrupt
+					 * for no pkts pending, which will
+					 * generate an interrupt
+					 */
+					MDDI_MSG_INFO("kick isr!\n");
+					spin_lock_irqsave(&mddi_host_spin_lock,
+							  flags);
+					mddi_host_enable_hclk();
+					mddi_host_reg_outm(INTEN,
+							   MDDI_INT_NO_CMD_PKTS_PEND,
+							   MDDI_INT_NO_CMD_PKTS_PEND);
+					spin_unlock_irqrestore
+					    (&mddi_host_spin_lock, flags);
+				}
+			}
+		}
+#endif /* #ifndef FEATURE_MDDI_DISABLE_REVERSE */
+	}
+
+	/* Check if logging is turned on */
+	for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+	     host_idx++) {
+		mddi_log_params_struct_type *prev_ptr = &(prev_parms[host_idx]);
+		pmhctl = &(mhctl[host_idx]);
+
+		if (mddi_debug_log_statistics) {
+
+			/* get video pkt count from MDP, since MDDI sw cannot know this */
+			pmhctl->log_parms.vid_cnt = mdp_total_vdopkts;
+
+			if (mddi_log_stats_counter >= mddi_log_stats_frequency) {
+				/* mddi_log_stats_counter = 0; */
+				if (mddi_debug_log_statistics) {
+					MDDI_MSG_NOTICE
+					    ("MDDI Statistics since last report:\n");
+					MDDI_MSG_NOTICE("  Packets sent:\n");
+					MDDI_MSG_NOTICE
+					    ("    %d RTD packet(s)\n",
+					     pmhctl->log_parms.rtd_cnt -
+					     prev_ptr->rtd_cnt);
+					if (prev_ptr->rtd_cnt !=
+					    pmhctl->log_parms.rtd_cnt) {
+						unsigned long flags;
+						spin_lock_irqsave
+						    (&mddi_host_spin_lock,
+						     flags);
+						mddi_host_enable_hclk();
+						pmhctl->rtd_value =
+						    mddi_host_reg_in(RTD_VAL);
+						spin_unlock_irqrestore
+						    (&mddi_host_spin_lock,
+						     flags);
+						MDDI_MSG_NOTICE
+						    ("      RTD value=%d\n",
+						     pmhctl->rtd_value);
+					}
+					MDDI_MSG_NOTICE
+					    ("    %d VIDEO packets\n",
+					     pmhctl->log_parms.vid_cnt -
+					     prev_ptr->vid_cnt);
+					MDDI_MSG_NOTICE
+					    ("    %d Register Access packets\n",
+					     pmhctl->log_parms.reg_acc_cnt -
+					     prev_ptr->reg_acc_cnt);
+					MDDI_MSG_NOTICE
+					    ("    %d Reverse Encapsulation packet(s)\n",
+					     pmhctl->log_parms.rev_enc_cnt -
+					     prev_ptr->rev_enc_cnt);
+					if (prev_ptr->rev_enc_cnt !=
+					    pmhctl->log_parms.rev_enc_cnt) {
+						/* report # of reverse CRC errors */
+						MDDI_MSG_NOTICE
+						    ("      %d reverse CRC errors detected\n",
+						     pmhctl->log_parms.
+						     rev_crc_cnt -
+						     prev_ptr->rev_crc_cnt);
+					}
+					MDDI_MSG_NOTICE
+					    ("  Packets received:\n");
+					MDDI_MSG_NOTICE
+					    ("    %d Client Status packets",
+					     pmhctl->log_parms.cli_stat_cnt -
+					     prev_ptr->cli_stat_cnt);
+					if (prev_ptr->cli_stat_cnt !=
+					    pmhctl->log_parms.cli_stat_cnt) {
+						MDDI_MSG_NOTICE
+						    ("      %d forward CRC errors reported\n",
+						     pmhctl->log_parms.
+						     fwd_crc_cnt -
+						     prev_ptr->fwd_crc_cnt);
+					}
+					MDDI_MSG_NOTICE
+					    ("    %d Register Access Read packets\n",
+					     pmhctl->log_parms.reg_read_cnt -
+					     prev_ptr->reg_read_cnt);
+
+					if (pmhctl->link_state ==
+					    MDDI_LINK_ACTIVE) {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Active\n");
+					} else
+					    if ((pmhctl->link_state ==
+						 MDDI_LINK_HIBERNATING)
+						|| (pmhctl->link_state ==
+						    MDDI_LINK_ACTIVATING)) {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Hibernation\n");
+					} else {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Inactive\n");
+					}
+					MDDI_MSG_NOTICE
+					    ("    Active state entered %d times\n",
+					     pmhctl->log_parms.link_active_cnt -
+					     prev_ptr->link_active_cnt);
+					MDDI_MSG_NOTICE
+					    ("    Hibernation state entered %d times\n",
+					     pmhctl->log_parms.
+					     link_hibernate_cnt -
+					     prev_ptr->link_hibernate_cnt);
+				}
+			}
+			prev_parms[host_idx] = pmhctl->log_parms;
+		}
+	}
+	if (mddi_log_stats_counter >= mddi_log_stats_frequency)
+		mddi_log_stats_counter = 0;
+
+	return;
+}				/* mddi_host_timer_cb */
+
+static void mddi_process_link_list_done(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	/* normal forward linked list packet(s) were sent */
+	if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+		MDDI_MSG_ERR("**** getting LL done, but no list ****\n");
+	} else {
+		uint16 idx;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (pmhctl->rev_state == MDDI_REV_REG_READ_ISSUED) {
+			/* special case where a register read packet was sent */
+			pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+			if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+				MDDI_MSG_ERR
+				    ("**** getting LL done, but no list ****\n");
+			}
+		}
+#endif
+		for (idx = pmhctl->llist_info.transmitting_start_idx;;) {
+			uint16 next_idx = pmhctl->llist_notify[idx].next_idx;
+			/* with reg read we don't release the waiting tcb until after
+			 * the reverse encapsulation has completed.
+			 */
+			if (idx != pmhctl->llist_info.reg_read_idx) {
+				/* notify task that may be waiting on this completion */
+				if (pmhctl->llist_notify[idx].waiting) {
+					complete(&
+						 (pmhctl->llist_notify[idx].
+						  done_comp));
+				}
+				if (pmhctl->llist_notify[idx].done_cb != NULL) {
+					(*(pmhctl->llist_notify[idx].done_cb))
+					    ();
+				}
+
+				pmhctl->llist_notify[idx].in_use = FALSE;
+				pmhctl->llist_notify[idx].waiting = FALSE;
+				pmhctl->llist_notify[idx].done_cb = NULL;
+				if (idx < MDDI_NUM_DYNAMIC_LLIST_ITEMS) {
+					/* static LLIST items are configured only once */
+					pmhctl->llist_notify[idx].next_idx =
+					    UNASSIGNED_INDEX;
+				}
+				/*
+				 * currently, all linked list packets are
+				 * register access, so we can increment the
+				 * counter for that packet type here.
+				 */
+				pmhctl->log_parms.reg_acc_cnt++;
+			}
+			if (idx == pmhctl->llist_info.transmitting_end_idx)
+				break;
+			idx = next_idx;
+			if (idx == UNASSIGNED_INDEX)
+				MDDI_MSG_CRIT("MDDI linked list corruption!\n");
+		}
+
+		pmhctl->llist_info.transmitting_start_idx = UNASSIGNED_INDEX;
+		pmhctl->llist_info.transmitting_end_idx = UNASSIGNED_INDEX;
+
+		if (pmhctl->mddi_waiting_for_llist_avail) {
+			if (!
+			    (pmhctl->
+			     llist_notify[pmhctl->llist_info.next_free_idx].
+			     in_use)) {
+				pmhctl->mddi_waiting_for_llist_avail = FALSE;
+				complete(&(pmhctl->mddi_llist_avail_comp));
+			}
+		}
+	}
+
+	/* Turn off MDDI_INT_PRI_LINK_LIST_DONE interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE, 0);
+
+}
+
+static void mddi_queue_forward_linked_list(void)
+{
+	uint16 first_pkt_index;
+	mddi_linked_list_type *llist_dma;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+	llist_dma = pmhctl->llist_dma_ptr;
+
+	first_pkt_index = UNASSIGNED_INDEX;
+
+	if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (pmhctl->llist_info.reg_read_waiting) {
+			if (pmhctl->rev_state == MDDI_REV_IDLE) {
+				/*
+				 * we have a register read to send and
+				 * can send it now
+				 */
+				pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+				mddi_reg_read_retry = 0;
+				first_pkt_index =
+				    pmhctl->llist_info.waiting_start_idx;
+				pmhctl->llist_info.reg_read_waiting = FALSE;
+			}
+		} else
+#endif
+		{
+			/*
+			 * not register read to worry about, go ahead and write
+			 * anything that may be on the waiting list.
+			 */
+			first_pkt_index = pmhctl->llist_info.waiting_start_idx;
+		}
+	}
+
+	if (first_pkt_index != UNASSIGNED_INDEX) {
+		pmhctl->llist_info.transmitting_start_idx =
+		    pmhctl->llist_info.waiting_start_idx;
+		pmhctl->llist_info.transmitting_end_idx =
+		    pmhctl->llist_info.waiting_end_idx;
+		pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+		pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+
+		/* write to the primary pointer register */
+		MDDI_MSG_DEBUG("MDDI writing primary ptr with idx=%d\n",
+			       first_pkt_index);
+
+		pmhctl->int_type.llist_ptr_write_2++;
+
+		dma_coherent_pre_ops();
+		mddi_host_reg_out(PRI_PTR, &llist_dma[first_pkt_index]);
+
+		/* enable interrupt when complete */
+		mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+				   MDDI_INT_PRI_LINK_LIST_DONE);
+
+	}
+
+}
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr)
+{
+	uint16 i, length;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	uint8 *rev_ptr_overflow =
+	    (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE);
+
+	/* first determine the length and handle invalid lengths */
+	length = *pmhctl->rev_ptr_curr++;
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	length |= ((*pmhctl->rev_ptr_curr++) << 8);
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	if (length > (pmhctl->rev_pkt_size - 2)) {
+		MDDI_MSG_ERR("Invalid rev pkt length %d\n", length);
+		/* rev_pkt_size should always be <= rev_ptr_size so limit to packet size */
+		length = pmhctl->rev_pkt_size - 2;
+	}
+
+	/* If the data pointer is NULL, just increment the pmhctl->rev_ptr_curr.
+	 * Loop around if necessary. Don't bother reading the data.
+	 */
+	if (data_ptr == NULL) {
+		pmhctl->rev_ptr_curr += length;
+		if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+			pmhctl->rev_ptr_curr -= MDDI_REV_BUFFER_SIZE;
+		return;
+	}
+
+	data_ptr[0] = length & 0x0ff;
+	data_ptr[1] = length >> 8;
+	data_ptr += 2;
+	/* copy the data to data_ptr byte-at-a-time */
+	for (i = 0; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow);
+	     i++)
+		*data_ptr++ = *pmhctl->rev_ptr_curr++;
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	for (; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow); i++)
+		*data_ptr++ = *pmhctl->rev_ptr_curr++;
+}
+
+static void mddi_process_rev_packets(void)
+{
+	uint32 rev_packet_count;
+	word i;
+	uint32 crc_errors;
+	boolean mddi_reg_read_successful = FALSE;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	pmhctl->log_parms.rev_enc_cnt++;
+	if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_CLIENT_CAP_ISSUED)) {
+		MDDI_MSG_ERR("Wrong state %d for reverse int\n",
+			     pmhctl->rev_state);
+	}
+	/* Turn off MDDI_INT_REV_AVAIL interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL, 0);
+
+	/* Clear rev data avail int */
+	mddi_host_reg_out(INT, MDDI_INT_REV_DATA_AVAIL);
+
+	/* Get Number of packets */
+	rev_packet_count = mddi_host_reg_in(REV_PKT_CNT);
+
+#ifndef T_MSM7500
+	/* Clear out rev packet counter */
+	mddi_host_reg_out(REV_PKT_CNT, 0x0000);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+	if ((pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) &&
+	    (rev_packet_count > 0) &&
+	    (mddi_host_core_version == 0x28 ||
+	     mddi_host_core_version == 0x30)) {
+
+		uint32 int_reg;
+		uint32 max_count = 0;
+
+		mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+		int_reg = mddi_host_reg_in(INT);
+		while ((int_reg & 0x100000) == 0) {
+			udelay(3);
+			int_reg = mddi_host_reg_in(INT);
+			if (++max_count > 100)
+				break;
+		}
+	}
+#endif
+
+	/* Get CRC error count */
+	crc_errors = mddi_host_reg_in(REV_CRC_ERR);
+	if (crc_errors != 0) {
+		pmhctl->log_parms.rev_crc_cnt += crc_errors;
+		pmhctl->stats.rev_crc_count += crc_errors;
+		MDDI_MSG_ERR("!!! MDDI %d Reverse CRC Error(s) !!!\n",
+			     crc_errors);
+#ifndef T_MSM7500
+		/* Clear CRC error count */
+		mddi_host_reg_out(REV_CRC_ERR, 0x0000);
+#endif
+		/* also issue an RTD to attempt recovery */
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+	}
+
+	pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+
+	MDDI_MSG_DEBUG("MDDI rev pkt cnt=%d, ptr=0x%x, RTD:0x%x\n",
+		       rev_packet_count,
+		       pmhctl->rev_ptr_curr - pmhctl->rev_ptr_start,
+		       pmhctl->rtd_value);
+
+	if (rev_packet_count >= 1) {
+		mddi_invalidate_cache_lines((uint32 *) pmhctl->rev_ptr_start,
+					    MDDI_REV_BUFFER_SIZE);
+	}
+	/* order the reads */
+	dma_coherent_post_ops();
+	for (i = 0; i < rev_packet_count; i++) {
+		mddi_rev_packet_type *rev_pkt_ptr;
+
+		mddi_read_rev_packet(rev_packet_data);
+
+		rev_pkt_ptr = (mddi_rev_packet_type *) rev_packet_data;
+
+		if (rev_pkt_ptr->packet_length > pmhctl->rev_pkt_size) {
+			MDDI_MSG_ERR("!!!invalid packet size: %d\n",
+				     rev_pkt_ptr->packet_length);
+		}
+
+		MDDI_MSG_DEBUG("MDDI rev pkt 0x%x size 0x%x\n",
+			       rev_pkt_ptr->packet_type,
+			       rev_pkt_ptr->packet_length);
+
+		/* Do whatever you want to do with the data based on the packet type */
+		switch (rev_pkt_ptr->packet_type) {
+		case 66:	/* Client Capability */
+			{
+				mddi_client_capability_type
+				    *client_capability_pkt_ptr;
+
+				client_capability_pkt_ptr =
+				    (mddi_client_capability_type *)
+				    rev_packet_data;
+				MDDI_MSG_NOTICE
+				    ("Client Capability: Week=%d, Year=%d\n",
+				     client_capability_pkt_ptr->
+				     Week_of_Manufacture,
+				     client_capability_pkt_ptr->
+				     Year_of_Manufacture);
+				memcpy((void *)&mddi_client_capability_pkt,
+				       (void *)rev_packet_data,
+				       sizeof(mddi_client_capability_type));
+				pmhctl->log_parms.cli_cap_cnt++;
+			}
+			break;
+
+		case 70:	/* Display Status */
+			{
+				mddi_client_status_type *client_status_pkt_ptr;
+
+				client_status_pkt_ptr =
+				    (mddi_client_status_type *) rev_packet_data;
+				if ((client_status_pkt_ptr->crc_error_count !=
+				     0)
+				    || (client_status_pkt_ptr->
+					reverse_link_request != 0)) {
+					MDDI_MSG_ERR
+					    ("Client Status: RevReq=%d, CrcErr=%d\n",
+					     client_status_pkt_ptr->
+					     reverse_link_request,
+					     client_status_pkt_ptr->
+					     crc_error_count);
+				} else {
+					MDDI_MSG_DEBUG
+					    ("Client Status: RevReq=%d, CrcErr=%d\n",
+					     client_status_pkt_ptr->
+					     reverse_link_request,
+					     client_status_pkt_ptr->
+					     crc_error_count);
+				}
+				pmhctl->log_parms.fwd_crc_cnt +=
+				    client_status_pkt_ptr->crc_error_count;
+				pmhctl->stats.fwd_crc_count +=
+				    client_status_pkt_ptr->crc_error_count;
+				pmhctl->log_parms.cli_stat_cnt++;
+			}
+			break;
+
+		case 146:	/* register access packet */
+			{
+				mddi_register_access_packet_type
+				    * regacc_pkt_ptr;
+
+				regacc_pkt_ptr =
+				    (mddi_register_access_packet_type *)
+				    rev_packet_data;
+
+				MDDI_MSG_DEBUG
+				    ("Reg Acc parse reg=0x%x, value=0x%x\n",
+				     regacc_pkt_ptr->register_address,
+				     regacc_pkt_ptr->register_data_list);
+
+				/* Copy register value to location passed in */
+				if (mddi_reg_read_value_ptr) {
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+					/* only least significant 16 bits are valid with 6280 */
+					*mddi_reg_read_value_ptr =
+					    regacc_pkt_ptr->
+					    register_data_list & 0x0000ffff;
+#else
+					*mddi_reg_read_value_ptr =
+					    regacc_pkt_ptr->register_data_list;
+#endif
+					mddi_reg_read_successful = TRUE;
+					mddi_reg_read_value_ptr = NULL;
+				}
+
+#ifdef DEBUG_MDDIHOSTI
+				if ((mddi_gpio.polling_enabled) &&
+				    (regacc_pkt_ptr->register_address ==
+				     mddi_gpio.polling_reg)) {
+					/*
+					 * ToDo: need to call Linux GPIO call
+					 * here...
+					 */
+					 mddi_client_lcd_gpio_poll(
+					 regacc_pkt_ptr->register_data_list);
+				}
+#endif
+				pmhctl->log_parms.reg_read_cnt++;
+			}
+			break;
+
+		default:	/* any other packet */
+			{
+				uint16 hdlr;
+
+				for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS;
+				     hdlr++) {
+					if (mddi_rev_pkt_handler[hdlr].
+					    pkt_type ==
+					    rev_pkt_ptr->packet_type) {
+						(*
+						 (mddi_rev_pkt_handler[hdlr].
+						  handler)) (rev_pkt_ptr);
+					/* pmhctl->rev_state = MDDI_REV_IDLE; */
+						break;
+					}
+				}
+				if (hdlr >= MAX_MDDI_REV_HANDLERS)
+					MDDI_MSG_ERR("MDDI unknown rev pkt\n");
+			}
+			break;
+		}
+	}
+	if ((pmhctl->rev_ptr_curr + pmhctl->rev_pkt_size) >=
+	    (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE)) {
+		pmhctl->rev_ptr_written = FALSE;
+	}
+
+	if (pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) {
+		pmhctl->rev_state = MDDI_REV_IDLE;
+		if (mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = FALSE;
+			complete(&(mddi_rev_user.done_comp));
+		} else if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+			MDDI_MSG_ERR
+			    ("Reverse Encap state, but no reg read in progress\n");
+		} else {
+			if ((!mddi_reg_read_successful) &&
+			    (mddi_reg_read_retry < mddi_reg_read_retry_max) &&
+			    (mddi_enable_reg_read_retry)) {
+				/*
+				 * There is a race condition that can happen
+				 * where the reverse encapsulation message is
+				 * sent out by the MDDI host before the register
+				 * read packet is sent. As a work-around for
+				 * that problem we issue the reverse
+				 * encapsulation one more time before giving up.
+				 */
+				if (mddi_enable_reg_read_retry_once)
+					mddi_reg_read_retry =
+					    mddi_reg_read_retry_max;
+				pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+				pmhctl->stats.reg_read_failure++;
+			} else {
+				uint16 reg_read_idx =
+				    pmhctl->llist_info.reg_read_idx;
+
+				mddi_reg_read_retry = 0;
+				if (pmhctl->llist_notify[reg_read_idx].waiting) {
+					complete(&
+						 (pmhctl->
+						  llist_notify[reg_read_idx].
+						  done_comp));
+				}
+				pmhctl->llist_info.reg_read_idx =
+				    UNASSIGNED_INDEX;
+				if (pmhctl->llist_notify[reg_read_idx].
+				    done_cb != NULL) {
+					(*
+					 (pmhctl->llist_notify[reg_read_idx].
+					  done_cb)) ();
+				}
+				pmhctl->llist_notify[reg_read_idx].next_idx =
+				    UNASSIGNED_INDEX;
+				pmhctl->llist_notify[reg_read_idx].in_use =
+				    FALSE;
+				pmhctl->llist_notify[reg_read_idx].waiting =
+				    FALSE;
+				pmhctl->llist_notify[reg_read_idx].done_cb =
+				    NULL;
+				if (!mddi_reg_read_successful)
+					pmhctl->stats.reg_read_failure++;
+			}
+		}
+	} else if (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) {
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+		if (mddi_host_core_version == 0x28 ||
+		    mddi_host_core_version == 0x30) {
+			mddi_host_reg_out(FIFO_ALLOC, 0x00);
+			pmhctl->rev_ptr_written = TRUE;
+			mddi_host_reg_out(REV_PTR,
+				pmhctl->mddi_rev_ptr_write_val);
+			pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+			mddi_host_reg_out(CMD, 0xC00);
+		}
+#endif
+
+		if (mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = FALSE;
+			complete(&(mddi_rev_user.done_comp));
+		}
+		pmhctl->rev_state = MDDI_REV_IDLE;
+	} else {
+		pmhctl->rev_state = MDDI_REV_IDLE;
+	}
+
+	/* pmhctl->rev_state = MDDI_REV_IDLE; */
+
+	/* Re-enable interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL,
+			   MDDI_INT_REV_DATA_AVAIL);
+
+}
+
+static void mddi_issue_reverse_encapsulation(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+	/* Only issue a reverse encapsulation packet if:
+	 * 1) another reverse is not in progress (MDDI_REV_IDLE).
+	 * 2) a register read has been sent (MDDI_REV_REG_READ_SENT).
+	 * 3) forward is not in progress, because of a hw bug in client that
+	 *    causes forward crc errors on packet immediately after rev encap.
+	 */
+	if (((pmhctl->rev_state == MDDI_REV_IDLE) ||
+	     (pmhctl->rev_state == MDDI_REV_REG_READ_SENT)) &&
+	    (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (!mdp_in_processing)) {
+		uint32 mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+
+		if ((pmhctl->rev_state == MDDI_REV_REG_READ_SENT) ||
+		    (mddi_rev_encap_user_request == TRUE)) {
+			mddi_host_enable_io_clock();
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				/* need to wake up link before issuing rev encap command */
+				MDDI_MSG_DEBUG("wake up link!\n");
+				pmhctl->link_state = MDDI_LINK_ACTIVATING;
+				mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			} else {
+				if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+					MDDI_MSG_DEBUG
+					    ("mddi sending RTD command!\n");
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_SEND_RTD);
+					pmhctl->rtd_counter = 0;
+					pmhctl->log_parms.rtd_cnt++;
+				}
+				if (pmhctl->rev_state != MDDI_REV_REG_READ_SENT) {
+					/* this is generic reverse request by user, so
+					 * reset the waiting flag. */
+					mddi_rev_encap_user_request = FALSE;
+				}
+				/* link is active so send reverse encap to get register read results */
+				pmhctl->rev_state = MDDI_REV_ENCAP_ISSUED;
+				mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+				MDDI_MSG_DEBUG("sending rev encap!\n");
+			}
+		} else
+		    if ((pmhctl->client_status_cnt >=
+			 mddi_client_status_frequency)
+			|| mddi_client_capability_request) {
+			mddi_host_enable_io_clock();
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				/* only wake up the link if it client status is overdue */
+				if ((pmhctl->client_status_cnt >=
+				     (mddi_client_status_frequency * 2))
+				    || mddi_client_capability_request) {
+					/* need to wake up link before issuing rev encap command */
+					MDDI_MSG_DEBUG("wake up link!\n");
+					pmhctl->link_state =
+					    MDDI_LINK_ACTIVATING;
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_LINK_ACTIVE);
+				}
+			} else {
+				if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+					MDDI_MSG_DEBUG
+					    ("mddi sending RTD command!\n");
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_SEND_RTD);
+					pmhctl->rtd_counter = 0;
+					pmhctl->log_parms.rtd_cnt++;
+				}
+				/* periodically get client status */
+				MDDI_MSG_DEBUG
+				    ("mddi sending rev enc! (get status)\n");
+				if (mddi_client_capability_request) {
+					pmhctl->rev_state =
+					    MDDI_REV_CLIENT_CAP_ISSUED;
+					mddi_command = MDDI_CMD_GET_CLIENT_CAP;
+					mddi_client_capability_request = FALSE;
+				} else {
+					pmhctl->rev_state =
+					    MDDI_REV_STATUS_REQ_ISSUED;
+					pmhctl->client_status_cnt = 0;
+					mddi_command =
+					    MDDI_CMD_GET_CLIENT_STATUS;
+				}
+			}
+		}
+		if ((pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) ||
+		    (pmhctl->rev_state == MDDI_REV_STATUS_REQ_ISSUED) ||
+		    (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED)) {
+			pmhctl->int_type.rev_encap_count++;
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+			mddi_rev_pointer_written = TRUE;
+			mddi_host_reg_out(REV_PTR, mddi_rev_ptr_write_val);
+			mddi_rev_ptr_curr = mddi_rev_ptr_start;
+			/* force new rev ptr command */
+			mddi_host_reg_out(CMD, 0xC00);
+#else
+			if (!pmhctl->rev_ptr_written) {
+				MDDI_MSG_DEBUG("writing reverse pointer!\n");
+				pmhctl->rev_ptr_written = TRUE;
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+				if ((pmhctl->rev_state ==
+				     MDDI_REV_CLIENT_CAP_ISSUED) &&
+				    (mddi_host_core_version == 0x28 ||
+				     mddi_host_core_version == 0x30)) {
+					pmhctl->rev_ptr_written = FALSE;
+					mddi_host_reg_out(FIFO_ALLOC, 0x02);
+				} else
+					mddi_host_reg_out(REV_PTR,
+						  pmhctl->
+						  mddi_rev_ptr_write_val);
+#else
+				mddi_host_reg_out(REV_PTR,
+						  pmhctl->
+						  mddi_rev_ptr_write_val);
+#endif
+			}
+#endif
+			if (mddi_debug_clear_rev_data) {
+				uint16 i;
+				for (i = 0; i < MDDI_MAX_REV_DATA_SIZE / 4; i++)
+					pmhctl->rev_data_buf[i] = 0xdddddddd;
+				/* clean cache */
+				mddi_flush_cache_lines(pmhctl->rev_data_buf,
+						       MDDI_MAX_REV_DATA_SIZE);
+			}
+
+			/* send reverse encapsulation to get needed data */
+			mddi_host_reg_out(CMD, mddi_command);
+		}
+	}
+
+}
+
+static void mddi_process_client_initiated_wakeup(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	/* Disable MDDI_INT Interrupt, we detect client initiated wakeup one
+	 * time for each entry into hibernation */
+	mddi_host_reg_outm(INTEN, MDDI_INT_MDDI_IN, 0);
+
+	if (host_idx == MDDI_HOST_PRIM) {
+		if (mddi_vsync_detect_enabled) {
+			mddi_host_enable_io_clock();
+#ifndef MDDI_HOST_DISP_LISTEN
+			/* issue command to bring up link */
+			/* need to do this to clear the vsync condition */
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				pmhctl->link_state = MDDI_LINK_ACTIVATING;
+				mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			}
+#endif
+			/*
+			 * Indicate to client specific code that vsync was
+			 * enabled, and we did not detect a client initiated
+			 * wakeup. The client specific handler can clear the
+			 * condition if necessary to prevent subsequent
+			 * client initiated wakeups.
+			 */
+			mddi_client_lcd_vsync_detected(TRUE);
+			pmhctl->log_parms.vsync_response_cnt++;
+			MDDI_MSG_NOTICE("MDDI_INT_IN condition\n");
+
+		}
+	}
+
+	if (mddi_gpio.polling_enabled) {
+		mddi_host_enable_io_clock();
+		/* check interrupt status now */
+		(void)mddi_queue_register_read_int(mddi_gpio.polling_reg,
+						   &mddi_gpio.polling_val);
+	}
+}
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+
+static void mddi_host_isr(void)
+{
+	uint32 int_reg, int_en;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	uint32 status_reg;
+#endif
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (!MDDI_HOST_IS_HCLK_ON) {
+		MDDI_HOST_ENABLE_HCLK;
+		MDDI_MSG_DEBUG("HCLK disabled, but isr is firing\n");
+	}
+	int_reg = mddi_host_reg_in(INT);
+	int_en = mddi_host_reg_in(INTEN);
+	pmhctl->saved_int_reg = int_reg;
+	pmhctl->saved_int_en = int_en;
+	int_reg = int_reg & int_en;
+	pmhctl->int_type.count++;
+
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	status_reg = mddi_host_reg_in(STAT);
+
+	if ((int_reg & MDDI_INT_MDDI_IN) ||
+	    ((int_en & MDDI_INT_MDDI_IN) &&
+	     ((int_reg == 0) || (status_reg & MDDI_STAT_CLIENT_WAKEUP_REQ)))) {
+		/*
+		 * The MDDI_IN condition will clear itself, and so it is
+		 * possible that MDDI_IN was the reason for the isr firing,
+		 * even though the interrupt register does not have the
+		 * MDDI_IN bit set. To check if this was the case we need to
+		 * look at the status register bit that signifies a client
+		 * initiated wakeup. If the status register bit is set, as well
+		 * as the MDDI_IN interrupt enabled, then we treat this as a
+		 * client initiated wakeup.
+		 */
+		if (int_reg & MDDI_INT_MDDI_IN)
+			pmhctl->int_type.in_count++;
+		mddi_process_client_initiated_wakeup();
+	}
+#endif
+
+	if (int_reg & MDDI_INT_LINK_STATE_CHANGES) {
+		pmhctl->int_type.state_change_count++;
+		mddi_report_state_change(int_reg);
+	}
+
+	if (int_reg & MDDI_INT_PRI_LINK_LIST_DONE) {
+		pmhctl->int_type.ll_done_count++;
+		mddi_process_link_list_done();
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_DATA_AVAIL) {
+		pmhctl->int_type.rev_avail_count++;
+		mddi_process_rev_packets();
+	}
+#endif
+
+	if (int_reg & MDDI_INT_ERROR_CONDITIONS) {
+		pmhctl->int_type.error_count++;
+		mddi_report_errors(int_reg);
+
+		mddi_host_reg_out(INT, int_reg & MDDI_INT_ERROR_CONDITIONS);
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	mddi_issue_reverse_encapsulation();
+
+	if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED))
+#endif
+		/* don't want simultaneous reverse and forward with Eagle */
+		mddi_queue_forward_linked_list();
+
+	if (int_reg & MDDI_INT_NO_CMD_PKTS_PEND) {
+		/* this interrupt is used to kick the isr when hibernation is disabled */
+		mddi_host_reg_outm(INTEN, MDDI_INT_NO_CMD_PKTS_PEND, 0);
+	}
+
+	if ((!mddi_host_mdp_active_flag) &&
+	    (!mddi_vsync_detect_enabled) &&
+	    (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->rev_state == MDDI_REV_IDLE)) {
+		if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+			mddi_host_disable_io_clock();
+			mddi_host_disable_hclk();
+		}
+#ifdef FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION
+		else if ((pmhctl->link_state == MDDI_LINK_ACTIVE) &&
+			 (!pmhctl->disable_hibernation)) {
+			mddi_host_reg_out(CMD, MDDI_CMD_POWERDOWN);
+		}
+#endif
+	}
+}
+
+static void mddi_host_isr_primary(void)
+{
+	mddi_curr_host = MDDI_HOST_PRIM;
+	mddi_host_isr();
+}
+
+irqreturn_t mddi_pmdh_isr_proxy(int irq, void *ptr)
+{
+	mddi_host_isr_primary();
+	return IRQ_HANDLED;
+}
+
+static void mddi_host_isr_external(void)
+{
+	mddi_curr_host = MDDI_HOST_EXT;
+	mddi_host_isr();
+	mddi_curr_host = MDDI_HOST_PRIM;
+}
+
+irqreturn_t mddi_emdh_isr_proxy(int irq, void *ptr)
+{
+	mddi_host_isr_external();
+	return IRQ_HANDLED;
+}
+
+static void mddi_host_initialize_registers(mddi_host_type host_idx)
+{
+	uint32 pad_reg_val;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+		return;
+
+	/* turn on HCLK to MDDI host core */
+	mddi_host_enable_hclk();
+
+	/* MDDI Reset command */
+	mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+	/* Version register (= 0x01) */
+	mddi_host_reg_out(VERSION, 0x0001);
+
+	/* Bytes per subframe register */
+	mddi_host_reg_out(BPS, MDDI_HOST_BYTES_PER_SUBFRAME);
+
+	/* Subframes per media frames register (= 0x03) */
+	mddi_host_reg_out(SPM, 0x0003);
+
+	/* Turn Around 1 register (= 0x05) */
+	mddi_host_reg_out(TA1_LEN, 0x0005);
+
+	/* Turn Around 2 register (= 0x0C) */
+	mddi_host_reg_out(TA2_LEN, MDDI_HOST_TA2_LEN);
+
+	/* Drive hi register (= 0x96) */
+	mddi_host_reg_out(DRIVE_HI, 0x0096);
+
+	/* Drive lo register (= 0x32) */
+	mddi_host_reg_out(DRIVE_LO, 0x0032);
+
+	/* Display wakeup count register (= 0x3c) */
+	mddi_host_reg_out(DISP_WAKE, 0x003c);
+
+	/* Reverse Rate Divisor register (= 0x2) */
+	mddi_host_reg_out(REV_RATE_DIV, MDDI_HOST_REV_RATE_DIV);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	/* Reverse Pointer Size */
+	mddi_host_reg_out(REV_SIZE, MDDI_REV_BUFFER_SIZE);
+
+	/* Rev Encap Size */
+	mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+#endif
+
+	/* Periodic Rev Encap */
+	/* don't send periodically */
+	mddi_host_reg_out(CMD, MDDI_CMD_PERIODIC_REV_ENCAP);
+
+	pad_reg_val = mddi_host_reg_in(PAD_CTL);
+	if (pad_reg_val == 0) {
+		/* If we are turning on band gap, need to wait 5us before turning
+		 * on the rest of the PAD */
+		mddi_host_reg_out(PAD_CTL, 0x08000);
+		udelay(5);
+	}
+#ifdef T_MSM7200
+	/* Recommendation from PAD hw team */
+	mddi_host_reg_out(PAD_CTL, 0xa850a);
+#else
+	/* Recommendation from PAD hw team */
+	mddi_host_reg_out(PAD_CTL, 0xa850f);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+	mddi_host_reg_out(PAD_IO_CTL, 0x00320000);
+	mddi_host_reg_out(PAD_CAL, 0x00220020);
+#endif
+
+	mddi_host_core_version = mddi_host_reg_inm(CORE_VER, 0xffff);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (mddi_host_core_version >= 8)
+		mddi_rev_ptr_workaround = FALSE;
+	pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+#endif
+
+	if ((mddi_host_core_version > 8) && (mddi_host_core_version < 0x19))
+		mddi_host_reg_out(TEST, 0x2);
+
+	/* Need an even number for counts */
+	mddi_host_reg_out(DRIVER_START_CNT, 0x60006);
+
+#ifndef T_MSM7500
+	/* Setup defaults for MDP related register */
+	mddi_host_reg_out(MDP_VID_FMT_DES, 0x5666);
+	mddi_host_reg_out(MDP_VID_PIX_ATTR, 0x00C3);
+	mddi_host_reg_out(MDP_VID_CLIENTID, 0);
+#endif
+
+	/* automatically hibernate after 1 empty subframe */
+	if (pmhctl->disable_hibernation)
+		mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+	else
+		mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+	/* Bring up link if display (client) requests it */
+#ifdef MDDI_HOST_DISP_LISTEN
+	mddi_host_reg_out(CMD, MDDI_CMD_DISP_LISTEN);
+#else
+	mddi_host_reg_out(CMD, MDDI_CMD_DISP_IGNORE);
+#endif
+
+}
+
+void mddi_host_configure_interrupts(mddi_host_type host_idx, boolean enable)
+{
+	unsigned long flags;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	/* turn on HCLK to MDDI host core if it has been disabled */
+	mddi_host_enable_hclk();
+	/* Clear MDDI Interrupt enable reg */
+	mddi_host_reg_out(INTEN, 0);
+
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (enable) {
+		pmhctl->driver_state = MDDI_DRIVER_ENABLED;
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (request_irq
+			    (INT_MDDI_PRI, mddi_pmdh_isr_proxy, IRQF_DISABLED,
+			     "PMDH", 0) != 0)
+				printk(KERN_ERR
+				       "a mddi: unable to request_irq\n");
+			else
+				int_mddi_pri_flag = TRUE;
+		} else {
+			if (request_irq
+			    (INT_MDDI_EXT, mddi_emdh_isr_proxy, IRQF_DISABLED,
+			     "EMDH", 0) != 0)
+				printk(KERN_ERR
+				       "b mddi: unable to request_irq\n");
+			else
+				int_mddi_ext_flag = TRUE;
+		}
+
+		/* Set MDDI Interrupt enable reg -- Enable Reverse data avail */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+		mddi_host_reg_out(INTEN,
+				  MDDI_INT_ERROR_CONDITIONS |
+				  MDDI_INT_LINK_STATE_CHANGES);
+#else
+		/* Reverse Pointer register */
+		pmhctl->rev_ptr_written = FALSE;
+
+		mddi_host_reg_out(INTEN,
+				  MDDI_INT_REV_DATA_AVAIL |
+				  MDDI_INT_ERROR_CONDITIONS |
+				  MDDI_INT_LINK_STATE_CHANGES);
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+		pmhctl->client_status_cnt = 0;
+#endif
+	} else {
+		if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+			pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+	}
+
+}
+
+static void mddi_host_powerup(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (pmhctl->link_state != MDDI_LINK_DISABLED)
+		return;
+
+	/* enable IO_CLK and hclk to MDDI host core */
+	mddi_host_enable_io_clock();
+
+	mddi_host_initialize_registers(host_idx);
+	mddi_host_configure_interrupts(host_idx, TRUE);
+
+	pmhctl->link_state = MDDI_LINK_ACTIVATING;
+
+	/* Link activate command */
+	mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+
+#ifdef CLKRGM_MDDI_IO_CLOCK_IN_MHZ
+	MDDI_MSG_NOTICE("MDDI Host: Activating Link %d Mbps\n",
+			CLKRGM_MDDI_IO_CLOCK_IN_MHZ * 2);
+#else
+	MDDI_MSG_NOTICE("MDDI Host: Activating Link\n");
+#endif
+
+	/* Initialize the timer */
+	if (host_idx == MDDI_HOST_PRIM)
+		mddi_host_timer_service(0);
+}
+
+void mddi_host_init(mddi_host_type host_idx)
+/* Write out the MDDI configuration registers */
+{
+	static boolean initialized = FALSE;
+	mddi_host_cntl_type *pmhctl;
+
+	if (host_idx >= MDDI_NUM_HOST_CORES) {
+		MDDI_MSG_ERR("Invalid host core index\n");
+		return;
+	}
+
+	if (!initialized) {
+		uint16 idx;
+		mddi_host_type host;
+		for (host = MDDI_HOST_PRIM; host < MDDI_NUM_HOST_CORES; host++) {
+			pmhctl = &(mhctl[host]);
+			initialized = TRUE;
+
+			pmhctl->llist_ptr =
+			    dma_alloc_coherent(NULL, MDDI_LLIST_POOL_SIZE,
+					       &(pmhctl->llist_dma_addr),
+					       GFP_KERNEL);
+			pmhctl->llist_dma_ptr =
+			    (mddi_linked_list_type *) (void *)pmhctl->
+			    llist_dma_addr;
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+			pmhctl->rev_data_buf = NULL;
+			if (pmhctl->llist_ptr == NULL)
+#else
+			mddi_rev_user.waiting = FALSE;
+			init_completion(&(mddi_rev_user.done_comp));
+			pmhctl->rev_data_buf =
+			    dma_alloc_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+					       &(pmhctl->rev_data_dma_addr),
+					       GFP_KERNEL);
+			if ((pmhctl->llist_ptr == NULL)
+			    || (pmhctl->rev_data_buf == NULL))
+#endif
+			{
+				MDDI_MSG_CRIT
+				    ("unable to alloc non-cached memory\n");
+			}
+			llist_extern[host] = pmhctl->llist_ptr;
+			llist_dma_extern[host] = pmhctl->llist_dma_ptr;
+			llist_extern_notify[host] = pmhctl->llist_notify;
+
+			for (idx = 0; idx < UNASSIGNED_INDEX; idx++) {
+				init_completion(&
+						(pmhctl->llist_notify[idx].
+						 done_comp));
+			}
+			init_completion(&(pmhctl->mddi_llist_avail_comp));
+			spin_lock_init(&mddi_host_spin_lock);
+			pmhctl->mddi_waiting_for_llist_avail = FALSE;
+			pmhctl->mddi_rev_ptr_write_val =
+			    (uint32) (void *)(pmhctl->rev_data_dma_addr);
+			pmhctl->rev_ptr_start = (void *)pmhctl->rev_data_buf;
+
+			pmhctl->rev_pkt_size = MDDI_DEFAULT_REV_PKT_SIZE;
+			pmhctl->rev_state = MDDI_REV_IDLE;
+#ifdef IMAGE_MODEM_PROC
+			/* assume hibernation state is last state from APPS proc, so that
+			 * we don't reinitialize the host core */
+			pmhctl->link_state = MDDI_LINK_HIBERNATING;
+#else
+			pmhctl->link_state = MDDI_LINK_DISABLED;
+#endif
+			pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+			pmhctl->disable_hibernation = FALSE;
+
+			/* initialize llist variables */
+			pmhctl->llist_info.transmitting_start_idx =
+			    UNASSIGNED_INDEX;
+			pmhctl->llist_info.transmitting_end_idx =
+			    UNASSIGNED_INDEX;
+			pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.reg_read_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.next_free_idx =
+			    MDDI_FIRST_DYNAMIC_LLIST_IDX;
+			pmhctl->llist_info.reg_read_waiting = FALSE;
+
+			mddi_vsync_detect_enabled = FALSE;
+			mddi_gpio.polling_enabled = FALSE;
+
+			pmhctl->int_type.count = 0;
+			pmhctl->int_type.in_count = 0;
+			pmhctl->int_type.disp_req_count = 0;
+			pmhctl->int_type.state_change_count = 0;
+			pmhctl->int_type.ll_done_count = 0;
+			pmhctl->int_type.rev_avail_count = 0;
+			pmhctl->int_type.error_count = 0;
+			pmhctl->int_type.rev_encap_count = 0;
+			pmhctl->int_type.llist_ptr_write_1 = 0;
+			pmhctl->int_type.llist_ptr_write_2 = 0;
+
+			pmhctl->stats.fwd_crc_count = 0;
+			pmhctl->stats.rev_crc_count = 0;
+			pmhctl->stats.pri_underflow = 0;
+			pmhctl->stats.sec_underflow = 0;
+			pmhctl->stats.rev_overflow = 0;
+			pmhctl->stats.pri_overwrite = 0;
+			pmhctl->stats.sec_overwrite = 0;
+			pmhctl->stats.rev_overwrite = 0;
+			pmhctl->stats.dma_failure = 0;
+			pmhctl->stats.rtd_failure = 0;
+			pmhctl->stats.reg_read_failure = 0;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+			pmhctl->stats.pri_underrun_detected = 0;
+#endif
+
+			pmhctl->log_parms.rtd_cnt = 0;
+			pmhctl->log_parms.rev_enc_cnt = 0;
+			pmhctl->log_parms.vid_cnt = 0;
+			pmhctl->log_parms.reg_acc_cnt = 0;
+			pmhctl->log_parms.cli_stat_cnt = 0;
+			pmhctl->log_parms.cli_cap_cnt = 0;
+			pmhctl->log_parms.reg_read_cnt = 0;
+			pmhctl->log_parms.link_active_cnt = 0;
+			pmhctl->log_parms.link_hibernate_cnt = 0;
+			pmhctl->log_parms.fwd_crc_cnt = 0;
+			pmhctl->log_parms.rev_crc_cnt = 0;
+			pmhctl->log_parms.vsync_response_cnt = 0;
+
+			prev_parms[host_idx] = pmhctl->log_parms;
+			mddi_client_capability_pkt.packet_length = 0;
+		}
+
+#ifndef T_MSM7500
+		/* tell clock driver we are user of this PLL */
+		MDDI_HOST_ENABLE_IO_CLOCK;
+#endif
+	}
+
+	mddi_host_powerup(host_idx);
+	pmhctl = &(mhctl[host_idx]);
+}
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+static uint32 mddi_client_id;
+
+uint32 mddi_get_client_id(void)
+{
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	static boolean client_detection_try = FALSE;
+	mddi_host_cntl_type *pmhctl;
+	unsigned long flags;
+	uint16 saved_rev_pkt_size;
+
+	if (!client_detection_try) {
+		/* Toshiba display requires larger drive_lo value */
+		mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+		pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+		saved_rev_pkt_size = pmhctl->rev_pkt_size;
+
+		/* Increase Rev Encap Size */
+		pmhctl->rev_pkt_size = MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE;
+		mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+		/* disable hibernation temporarily */
+		if (!pmhctl->disable_hibernation)
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+
+		mddi_rev_user.waiting = TRUE;
+		INIT_COMPLETION(mddi_rev_user.done_comp);
+
+		spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+		/* turn on clock(s), if they have been disabled */
+		mddi_host_enable_hclk();
+		mddi_host_enable_io_clock();
+
+		mddi_client_capability_request = TRUE;
+
+		if (pmhctl->rev_state == MDDI_REV_IDLE) {
+			/* attempt to send the reverse encapsulation now */
+			mddi_issue_reverse_encapsulation();
+		}
+		spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+		wait_for_completion_killable(&(mddi_rev_user.done_comp));
+
+		/* Set Rev Encap Size back to its original value */
+		pmhctl->rev_pkt_size = saved_rev_pkt_size;
+		mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+		/* reenable auto-hibernate */
+		if (!pmhctl->disable_hibernation)
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+		mddi_host_reg_out(DRIVE_LO, 0x0032);
+		client_detection_try = TRUE;
+
+		mddi_client_id = (mddi_client_capability_pkt.Mfr_Name<<16) |
+				mddi_client_capability_pkt.Product_Code;
+
+		if (!mddi_client_id)
+			mddi_disable(1);
+	}
+
+#if 0
+	switch (mddi_client_capability_pkt.Mfr_Name) {
+	case 0x4474:
+		if ((mddi_client_capability_pkt.Product_Code != 0x8960) &&
+		    (target == DISPLAY_1)) {
+			ret = PRISM_WVGA;
+		}
+		break;
+
+	case 0xD263:
+		if (target == DISPLAY_1)
+			ret = TOSHIBA_VGA_PRIM;
+		else if (target == DISPLAY_2)
+			ret = TOSHIBA_QCIF_SECD;
+		break;
+
+	case 0:
+		if (mddi_client_capability_pkt.Product_Code == 0x8835) {
+			if (target == DISPLAY_1)
+				ret = SHARP_QVGA_PRIM;
+			else if (target == DISPLAY_2)
+				ret = SHARP_128x128_SECD;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	if ((!client_detection_try) && (ret != TOSHIBA_VGA_PRIM)
+	    && (ret != TOSHIBA_QCIF_SECD)) {
+		/* Not a Toshiba display, so change drive_lo back to default value */
+		mddi_host_reg_out(DRIVE_LO, 0x0032);
+	}
+#endif
+
+#endif
+
+	return mddi_client_id;
+}
+#endif
+
+void mddi_host_powerdown(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (host_idx >= MDDI_NUM_HOST_CORES) {
+		MDDI_MSG_ERR("Invalid host core index\n");
+		return;
+	}
+
+	if (pmhctl->driver_state == MDDI_DRIVER_RESET) {
+		return;
+	}
+
+	if (host_idx == MDDI_HOST_PRIM) {
+		/* disable timer */
+		del_timer(&mddi_host_timer);
+	}
+
+	mddi_host_configure_interrupts(host_idx, FALSE);
+
+	/* turn on HCLK to MDDI host core if it has been disabled */
+	mddi_host_enable_hclk();
+
+	/* MDDI Reset command */
+	mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+	/* Pad Control Register */
+	mddi_host_reg_out(PAD_CTL, 0x0);
+
+	/* disable IO_CLK and hclk to MDDI host core */
+	mddi_host_disable_io_clock();
+	mddi_host_disable_hclk();
+
+	pmhctl->link_state = MDDI_LINK_DISABLED;
+	pmhctl->driver_state = MDDI_DRIVER_RESET;
+
+	MDDI_MSG_NOTICE("MDDI Host: Disabling Link\n");
+
+}
+
+uint16 mddi_get_next_free_llist_item(mddi_host_type host_idx, boolean wait)
+{
+	unsigned long flags;
+	uint16 ret_idx;
+	boolean forced_wait = FALSE;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	ret_idx = pmhctl->llist_info.next_free_idx;
+
+	pmhctl->llist_info.next_free_idx++;
+	if (pmhctl->llist_info.next_free_idx >= MDDI_NUM_DYNAMIC_LLIST_ITEMS)
+		pmhctl->llist_info.next_free_idx = MDDI_FIRST_DYNAMIC_LLIST_IDX;
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	if (pmhctl->llist_notify[ret_idx].in_use) {
+		if (!wait) {
+			pmhctl->llist_info.next_free_idx = ret_idx;
+			ret_idx = UNASSIGNED_INDEX;
+		} else {
+			forced_wait = TRUE;
+			INIT_COMPLETION(pmhctl->mddi_llist_avail_comp);
+		}
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (forced_wait) {
+		wait_for_completion_killable(&
+						  (pmhctl->
+						   mddi_llist_avail_comp));
+		MDDI_MSG_ERR("task waiting on mddi llist item\n");
+	}
+
+	if (ret_idx != UNASSIGNED_INDEX) {
+		pmhctl->llist_notify[ret_idx].waiting = FALSE;
+		pmhctl->llist_notify[ret_idx].done_cb = NULL;
+		pmhctl->llist_notify[ret_idx].in_use = TRUE;
+		pmhctl->llist_notify[ret_idx].next_idx = UNASSIGNED_INDEX;
+	}
+
+	return ret_idx;
+}
+
+uint16 mddi_get_reg_read_llist_item(mddi_host_type host_idx, boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)wait;
+	return FALSE;
+#else
+	unsigned long flags;
+	uint16 ret_idx;
+	boolean error = FALSE;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	if (pmhctl->llist_info.reg_read_idx != UNASSIGNED_INDEX) {
+		/* need to block here or is this an error condition? */
+		error = TRUE;
+		ret_idx = UNASSIGNED_INDEX;
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (!error) {
+		ret_idx = pmhctl->llist_info.reg_read_idx =
+		    mddi_get_next_free_llist_item(host_idx, wait);
+		/* clear the reg_read_waiting flag */
+		pmhctl->llist_info.reg_read_waiting = FALSE;
+	}
+
+	if (error)
+		MDDI_MSG_ERR("***** Reg read still in progress! ****\n");
+	return ret_idx;
+#endif
+
+}
+
+void mddi_queue_forward_packets(uint16 first_llist_idx,
+				uint16 last_llist_idx,
+				boolean wait,
+				mddi_llist_done_cb_type llist_done_cb,
+				mddi_host_type host_idx)
+{
+	unsigned long flags;
+	mddi_linked_list_type *llist;
+	mddi_linked_list_type *llist_dma;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if ((first_llist_idx >= UNASSIGNED_INDEX) ||
+	    (last_llist_idx >= UNASSIGNED_INDEX)) {
+		MDDI_MSG_ERR("MDDI queueing invalid linked list\n");
+		return;
+	}
+
+	if (pmhctl->link_state == MDDI_LINK_DISABLED)
+		MDDI_MSG_CRIT("MDDI host powered down!\n");
+
+	llist = pmhctl->llist_ptr;
+	llist_dma = pmhctl->llist_dma_ptr;
+
+	/* clean cache so MDDI host can read data */
+	memory_barrier();
+
+	pmhctl->llist_notify[last_llist_idx].waiting = wait;
+	if (wait)
+		INIT_COMPLETION(pmhctl->llist_notify[last_llist_idx].done_comp);
+	pmhctl->llist_notify[last_llist_idx].done_cb = llist_done_cb;
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	if ((pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->rev_state == MDDI_REV_IDLE)) {
+		/* no packets are currently transmitting */
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/* This is the special case where the packet is a register read. */
+			pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+			mddi_reg_read_retry = 0;
+			/* mddi_rev_reg_read_attempt = 1; */
+		}
+#endif
+		/* assign transmitting index values */
+		pmhctl->llist_info.transmitting_start_idx = first_llist_idx;
+		pmhctl->llist_info.transmitting_end_idx = last_llist_idx;
+
+		/* turn on clock(s), if they have been disabled */
+		mddi_host_enable_hclk();
+		mddi_host_enable_io_clock();
+		pmhctl->int_type.llist_ptr_write_1++;
+		/* Write to primary pointer register */
+		dma_coherent_pre_ops();
+		mddi_host_reg_out(PRI_PTR, &llist_dma[first_llist_idx]);
+
+		/* enable interrupt when complete */
+		mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+				   MDDI_INT_PRI_LINK_LIST_DONE);
+
+	} else if (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/*
+			 * we have a register read to send but need to wait
+			 * for current reverse activity to end or there are
+			 * packets currently transmitting
+			 */
+			/* mddi_rev_reg_read_attempt = 0; */
+			pmhctl->llist_info.reg_read_waiting = TRUE;
+		}
+#endif
+
+		/* assign waiting index values */
+		pmhctl->llist_info.waiting_start_idx = first_llist_idx;
+		pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+	} else {
+		uint16 prev_end_idx = pmhctl->llist_info.waiting_end_idx;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/*
+			 * we have a register read to send but need to wait
+			 * for current reverse activity to end or there are
+			 * packets currently transmitting
+			 */
+			/* mddi_rev_reg_read_attempt = 0; */
+			pmhctl->llist_info.reg_read_waiting = TRUE;
+		}
+#endif
+
+		llist = pmhctl->llist_ptr;
+
+		/* clear end flag in previous last packet */
+		llist[prev_end_idx].link_controller_flags = 0;
+		pmhctl->llist_notify[prev_end_idx].next_idx = first_llist_idx;
+
+		/* set the next_packet_pointer of the previous last packet */
+		llist[prev_end_idx].next_packet_pointer =
+		    (void *)(&llist_dma[first_llist_idx]);
+
+		/* clean cache so MDDI host can read data */
+		memory_barrier();
+
+		/* assign new waiting last index value */
+		pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+	}
+
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+}
+
+void mddi_host_write_pix_attr_reg(uint32 value)
+{
+	(void)value;
+}
+
+void mddi_queue_reverse_encapsulation(boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)wait;
+#else
+	unsigned long flags;
+	boolean error = FALSE;
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	/* turn on clock(s), if they have been disabled */
+	mddi_host_enable_hclk();
+	mddi_host_enable_io_clock();
+
+	if (wait) {
+		if (!mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = TRUE;
+			INIT_COMPLETION(mddi_rev_user.done_comp);
+		} else
+			error = TRUE;
+	}
+	mddi_rev_encap_user_request = TRUE;
+
+	if (pmhctl->rev_state == MDDI_REV_IDLE) {
+		/* attempt to send the reverse encapsulation now */
+		mddi_host_type orig_host_idx = mddi_curr_host;
+		mddi_curr_host = host_idx;
+		mddi_issue_reverse_encapsulation();
+		mddi_curr_host = orig_host_idx;
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (error) {
+		MDDI_MSG_ERR("Reverse Encap request already in progress\n");
+	} else if (wait)
+		wait_for_completion_killable(&(mddi_rev_user.done_comp));
+#endif
+}
+
+/* ISR to be executed */
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)handler;
+	(void)pkt_type;
+	return (FALSE);
+#else
+	unsigned long flags;
+	uint16 hdlr;
+	boolean handler_set = FALSE;
+	boolean overwrite = FALSE;
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+		if (mddi_rev_pkt_handler[hdlr].pkt_type == pkt_type) {
+			mddi_rev_pkt_handler[hdlr].handler = handler;
+			if (handler == NULL) {
+				/* clearing handler from table */
+				mddi_rev_pkt_handler[hdlr].pkt_type =
+				    INVALID_PKT_TYPE;
+				handler_set = TRUE;
+				if (pkt_type == 0x10) {	/* video stream packet */
+					/* ensure HCLK on to MDDI host core before register write */
+					mddi_host_enable_hclk();
+					/* No longer getting video, so reset rev encap size to default */
+					pmhctl->rev_pkt_size =
+					    MDDI_DEFAULT_REV_PKT_SIZE;
+					mddi_host_reg_out(REV_ENCAP_SZ,
+							  pmhctl->rev_pkt_size);
+				}
+			} else {
+				/* already a handler for this packet */
+				overwrite = TRUE;
+			}
+			break;
+		}
+	}
+	if ((hdlr >= MAX_MDDI_REV_HANDLERS) && (handler != NULL)) {
+		/* assigning new handler */
+		for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+			if (mddi_rev_pkt_handler[hdlr].pkt_type ==
+			    INVALID_PKT_TYPE) {
+				if ((pkt_type == 0x10) &&	/* video stream packet */
+				    (pmhctl->rev_pkt_size <
+				     MDDI_VIDEO_REV_PKT_SIZE)) {
+					/* ensure HCLK on to MDDI host core before register write */
+					mddi_host_enable_hclk();
+					/* Increase Rev Encap Size */
+					pmhctl->rev_pkt_size =
+					    MDDI_VIDEO_REV_PKT_SIZE;
+					mddi_host_reg_out(REV_ENCAP_SZ,
+							  pmhctl->rev_pkt_size);
+				}
+				mddi_rev_pkt_handler[hdlr].handler = handler;
+				mddi_rev_pkt_handler[hdlr].pkt_type = pkt_type;
+				handler_set = TRUE;
+				break;
+			}
+		}
+	}
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (overwrite)
+		MDDI_MSG_ERR("Overwriting previous rev packet handler\n");
+
+	return handler_set;
+
+#endif
+}				/* mddi_set_rev_handler */
+
+void mddi_host_disable_hibernation(boolean disable)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	if (disable) {
+		pmhctl->disable_hibernation = TRUE;
+		/* hibernation will be turned off by isr next time it is entered */
+	} else {
+		if (pmhctl->disable_hibernation) {
+			unsigned long flags;
+			spin_lock_irqsave(&mddi_host_spin_lock, flags);
+			if (!MDDI_HOST_IS_HCLK_ON)
+				MDDI_HOST_ENABLE_HCLK;
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+			spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+			pmhctl->disable_hibernation = FALSE;
+		}
+	}
+}
+
+void mddi_mhctl_remove(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl;
+
+	pmhctl = &(mhctl[host_idx]);
+
+	dma_free_coherent(NULL, MDDI_LLIST_POOL_SIZE, (void *)pmhctl->llist_ptr,
+			  pmhctl->llist_dma_addr);
+
+	dma_free_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+			  (void *)pmhctl->rev_data_buf,
+			  pmhctl->rev_data_dma_addr);
+}
diff --git a/drivers/staging/msm/mddihosti.h b/drivers/staging/msm/mddihosti.h
new file mode 100644
index 00000000000..7b26a425389
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.h
@@ -0,0 +1,547 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOSTI_H
+#define MDDIHOSTI_H
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include <linux/clk.h>
+
+/* Register offsets in MDDI, applies to both msm_pmdh_base and
+ * (u32)msm_emdh_base. */
+#define MDDI_CMD   		0x0000
+#define MDDI_VERSION   		0x0004
+#define MDDI_PRI_PTR		0x0008
+#define MDDI_BPS		0x0010
+#define MDDI_SPM		0x0014
+#define MDDI_INT		0x0018
+#define MDDI_INTEN		0x001c
+#define MDDI_REV_PTR		0x0020
+#define MDDI_REV_SIZE		0x0024
+#define MDDI_STAT		0x0028
+#define MDDI_REV_RATE_DIV	0x002c
+#define MDDI_REV_CRC_ERR	0x0030
+#define MDDI_TA1_LEN		0x0034
+#define MDDI_TA2_LEN		0x0038
+#define MDDI_TEST		0x0040
+#define MDDI_REV_PKT_CNT	0x0044
+#define MDDI_DRIVE_HI		0x0048
+#define MDDI_DRIVE_LO		0x004c
+#define MDDI_DISP_WAKE		0x0050
+#define MDDI_REV_ENCAP_SZ	0x0054
+#define MDDI_RTD_VAL		0x0058
+#define MDDI_PAD_CTL		0x0068
+#define MDDI_DRIVER_START_CNT	0x006c
+#define MDDI_CORE_VER		0x008c
+#define MDDI_FIFO_ALLOC         0x0090
+#define MDDI_PAD_IO_CTL         0x00a0
+#define MDDI_PAD_CAL            0x00a4
+
+extern u32 mddi_msg_level;
+
+/* No longer need to write to clear these registers */
+#define xxxx_mddi_host_reg_outm(reg, mask, val)  \
+do { \
+	if (host_idx == MDDI_HOST_PRIM) \
+		mddi_host_reg_outm_pmdh(reg, mask, val); \
+	else \
+		mddi_host_reg_outm_emdh(reg, mask, val); \
+} while (0)
+
+#define mddi_host_reg_outm(reg, mask, val) \
+do { \
+	unsigned long __addr; \
+	if (host_idx == MDDI_HOST_PRIM) \
+		__addr = (u32)msm_pmdh_base + MDDI_##reg; \
+	else \
+		__addr = (u32)msm_emdh_base + MDDI_##reg; \
+	writel((readl(__addr) & ~(mask)) | ((val) & (mask)), __addr); \
+} while (0)
+
+#define xxxx_mddi_host_reg_out(reg, val) \
+do { \
+	if (host_idx == MDDI_HOST_PRIM)  \
+		mddi_host_reg_out_pmdh(reg, val); \
+	else \
+		mddi_host_reg_out_emdh(reg, val); \
+	} while (0)
+
+#define mddi_host_reg_out(reg, val) \
+do { \
+	if (host_idx == MDDI_HOST_PRIM) \
+		writel(val, (u32)msm_pmdh_base + MDDI_##reg); \
+	else \
+		writel(val, (u32)msm_emdh_base + MDDI_##reg); \
+} while (0)
+
+#define xxxx_mddi_host_reg_in(reg)  \
+  ((host_idx) ? \
+     mddi_host_reg_in_emdh(reg) : mddi_host_reg_in_pmdh(reg));
+
+#define mddi_host_reg_in(reg) \
+((host_idx) ? \
+	readl((u32)msm_emdh_base + MDDI_##reg) : \
+	readl((u32)msm_pmdh_base + MDDI_##reg)) \
+
+#define xxxx_mddi_host_reg_inm(reg, mask)  \
+  ((host_idx) ? \
+    mddi_host_reg_inm_emdh(reg, mask) : \
+    mddi_host_reg_inm_pmdh(reg, mask);)
+
+#define mddi_host_reg_inm(reg, mask) \
+((host_idx) ? \
+	readl((u32)msm_emdh_base + MDDI_##reg) & (mask) : \
+	readl((u32)msm_pmdh_base + MDDI_##reg) & (mask)) \
+
+/* Using non-cacheable pmem, so do nothing */
+#define mddi_invalidate_cache_lines(addr_start, num_bytes)
+/*
+ * Using non-cacheable pmem, so do nothing with cache
+ * but, ensure write goes out to memory
+ */
+#define mddi_flush_cache_lines(addr_start, num_bytes)  \
+    (void) addr_start; \
+    (void) num_bytes;  \
+    memory_barrier()
+
+/* Since this translates to Remote Procedure Calls to check on clock status
+* just use a local variable to keep track of io_clock */
+#define MDDI_HOST_IS_IO_CLOCK_ON mddi_host_io_clock_on
+#define MDDI_HOST_ENABLE_IO_CLOCK
+#define MDDI_HOST_DISABLE_IO_CLOCK
+#define MDDI_HOST_IS_HCLK_ON mddi_host_hclk_on
+#define MDDI_HOST_ENABLE_HCLK
+#define MDDI_HOST_DISABLE_HCLK
+#define FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+#define FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+
+#define TRAMP_MDDI_HOST_ISR TRAMP_MDDI_PRI_ISR
+#define TRAMP_MDDI_HOST_EXT_ISR TRAMP_MDDI_EXT_ISR
+#define MDP_LINE_COUNT_BMSK  0x3ff
+#define MDP_SYNC_STATUS  0x000c
+#define MDP_LINE_COUNT      \
+(readl(msm_mdp_base + MDP_SYNC_STATUS) & MDP_LINE_COUNT_BMSK)
+
+/* MDP sends 256 pixel packets, so lower value hibernates more without
+* significantly increasing latency of waiting for next subframe */
+#define MDDI_HOST_BYTES_PER_SUBFRAME  0x3C00
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+#define MDDI_HOST_TA2_LEN       0x001a
+#define MDDI_HOST_REV_RATE_DIV  0x0004
+#else
+#define MDDI_HOST_TA2_LEN       0x000c
+#define MDDI_HOST_REV_RATE_DIV  0x0002
+#endif
+
+#define MDDI_MSG_EMERG(msg, ...)    \
+	if (mddi_msg_level > 0)  \
+		printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MDDI_MSG_ALERT(msg, ...)    \
+	if (mddi_msg_level > 1)  \
+		printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MDDI_MSG_CRIT(msg, ...)    \
+	if (mddi_msg_level > 2)  \
+		printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MDDI_MSG_ERR(msg, ...)    \
+	if (mddi_msg_level > 3)  \
+		printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MDDI_MSG_WARNING(msg, ...)    \
+	if (mddi_msg_level > 4)  \
+		printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MDDI_MSG_NOTICE(msg, ...)    \
+	if (mddi_msg_level > 5)  \
+		printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MDDI_MSG_INFO(msg, ...)    \
+	if (mddi_msg_level > 6)  \
+		printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MDDI_MSG_DEBUG(msg, ...)    \
+	if (mddi_msg_level > 7)  \
+		printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#define GCC_PACKED __attribute__((packed))
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 70 identifies the packet as
+		a Client status Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall
+		be set to zero. */
+
+} mddi_rev_packet_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 70 identifies the packet as
+		a Client status Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall
+		be set to zero. */
+
+	uint16 reverse_link_request;
+	/* 16 bit unsigned integer with number of bytes client
+		needs in the * reverse encapsulation message
+		to transmit data. */
+
+	uint8 crc_error_count;
+	uint8 capability_change;
+	uint16 graphics_busy_flags;
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all the bytes in the packet
+		including Packet Length. */
+
+} mddi_client_status_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 66 identifies the packet as
+		a Client Capability Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and
+		shall be set to zero. */
+
+	uint16 Protocol_Version;
+	uint16 Minimum_Protocol_Version;
+	uint16 Data_Rate_Capability;
+	uint8 Interface_Type_Capability;
+	uint8 Number_of_Alt_Displays;
+	uint16 PostCal_Data_Rate;
+	uint16 Bitmap_Width;
+	uint16 Bitmap_Height;
+	uint16 Display_Window_Width;
+	uint16 Display_Window_Height;
+	uint32 Color_Map_Size;
+	uint16 Color_Map_RGB_Width;
+	uint16 RGB_Capability;
+	uint8 Monochrome_Capability;
+	uint8 Reserved_1;
+	uint16 Y_Cb_Cr_Capability;
+	uint16 Bayer_Capability;
+	uint16 Alpha_Cursor_Image_Planes;
+	uint32 Client_Feature_Capability_Indicators;
+	uint8 Maximum_Video_Frame_Rate_Capability;
+	uint8 Minimum_Video_Frame_Rate_Capability;
+	uint16 Minimum_Sub_frame_Rate;
+	uint16 Audio_Buffer_Depth;
+	uint16 Audio_Channel_Capability;
+	uint16 Audio_Sample_Rate_Capability;
+	uint8 Audio_Sample_Resolution;
+	uint8 Mic_Audio_Sample_Resolution;
+	uint16 Mic_Sample_Rate_Capability;
+	uint8 Keyboard_Data_Format;
+	uint8 pointing_device_data_format;
+	uint16 content_protection_type;
+	uint16 Mfr_Name;
+	uint16 Product_Code;
+	uint16 Reserved_3;
+	uint32 Serial_Number;
+	uint8 Week_of_Manufacture;
+	uint8 Year_of_Manufacture;
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all the bytes in the packet including Packet Length. */
+
+} mddi_client_capability_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 16 identifies the packet as a Video Stream Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall be set to zero. */
+
+	uint16 video_data_format_descriptor;
+	/* format of each pixel in the Pixel Data in the present stream in the
+	 * present packet.
+	 * If bits [15:13] = 000 monochrome
+	 * If bits [15:13] = 001 color pixels (palette).
+	 * If bits [15:13] = 010 color pixels in raw RGB
+	 * If bits [15:13] = 011 data in 4:2:2 Y Cb Cr format
+	 * If bits [15:13] = 100 Bayer pixels
+	 */
+
+	uint16 pixel_data_attributes;
+	/* interpreted as follows:
+	 * Bits [1:0] = 11  pixel data is displayed to both eyes
+	 * Bits [1:0] = 10  pixel data is routed to the left eye only.
+	 * Bits [1:0] = 01  pixel data is routed to the right eye only.
+	 * Bits [1:0] = 00  pixel data is routed to the alternate display.
+	 * Bit 2 is 0  Pixel Data is in the standard progressive format.
+	 * Bit 2 is 1  Pixel Data is in interlace format.
+	 * Bit 3 is 0  Pixel Data is in the standard progressive format.
+	 * Bit 3 is 1  Pixel Data is in alternate pixel format.
+	 * Bit 4 is 0  Pixel Data is to or from the display frame buffer.
+	 * Bit 4 is 1  Pixel Data is to or from the camera.
+	 * Bit 5 is 0  pixel data contains the next consecutive row of pixels.
+	 * Bit 5 is 1  X Left Edge, Y Top Edge, X Right Edge, Y Bottom Edge,
+	 *             X Start, and Y Start parameters are not defined and
+	 *             shall be ignored by the client.
+	 * Bits [7:6] = 01  Pixel data is written to the offline image buffer.
+	 * Bits [7:6] = 00  Pixel data is written to the buffer to refresh display.
+	 * Bits [7:6] = 11  Pixel data is written to all image buffers.
+	 * Bits [7:6] = 10  Invalid. Reserved for future use.
+	 * Bits 8 through 11 alternate display number.
+	 * Bits 12 through 14 are reserved for future use and shall be set to zero.
+	 * Bit 15 is 1 the row of pixels is the last row of pixels in a frame.
+	 */
+
+	uint16 x_left_edge;
+	uint16 y_top_edge;
+	/* X,Y coordinate of the top left edge of the screen window */
+
+	uint16 x_right_edge;
+	uint16 y_bottom_edge;
+	/*  X,Y coordinate of the bottom right edge of the window being updated. */
+
+	uint16 x_start;
+	uint16 y_start;
+	/*  (X Start, Y Start) is the first pixel in the Pixel Data field below. */
+
+	uint16 pixel_count;
+	/*  number of pixels in the Pixel Data field below. */
+
+	uint16 parameter_CRC;
+	/*  16-bit CRC of all bytes from the Packet Length to the Pixel Count. */
+
+	uint16 reserved;
+	/* 16-bit variable to make structure align on 4 byte boundary */
+
+} mddi_video_stream_packet_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 146 identifies the packet as a Register Access Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall be set to zero. */
+
+	uint16 read_write_info;
+	/* Bits 13:0  a 14-bit unsigned integer that specifies the number of
+	 *            32-bit Register Data List items to be transferred in the
+	 *            Register Data List field.
+	 * Bits[15:14] = 00  Write to register(s);
+	 * Bits[15:14] = 10  Read from register(s);
+	 * Bits[15:14] = 11  Response to a Read.
+	 * Bits[15:14] = 01  this value is reserved for future use. */
+
+	uint32 register_address;
+	/* the register address that is to be written to or read from. */
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all bytes from the Packet Length to the Register Address. */
+
+	uint32 register_data_list;
+	/* list of 4-byte register data values for/from client registers */
+
+} mddi_register_access_packet_type;
+
+typedef union GCC_PACKED {
+	mddi_video_stream_packet_type video_pkt;
+	mddi_register_access_packet_type register_pkt;
+	/* add 48 byte pad to ensure 64 byte llist struct, that can be
+	 * manipulated easily with cache */
+	uint32 alignment_pad[12];	/* 48 bytes */
+} mddi_packet_header_type;
+
+typedef struct GCC_PACKED mddi_host_llist_struct {
+	uint16 link_controller_flags;
+	uint16 packet_header_count;
+	uint16 packet_data_count;
+	void *packet_data_pointer;
+	struct mddi_host_llist_struct *next_packet_pointer;
+	uint16 reserved;
+	mddi_packet_header_type packet_header;
+} mddi_linked_list_type;
+
+typedef struct {
+	struct completion done_comp;
+	mddi_llist_done_cb_type done_cb;
+	uint16 next_idx;
+	boolean waiting;
+	boolean in_use;
+} mddi_linked_list_notify_type;
+
+#define MDDI_LLIST_POOL_SIZE 0x1000
+#define MDDI_MAX_NUM_LLIST_ITEMS (MDDI_LLIST_POOL_SIZE / \
+		 sizeof(mddi_linked_list_type))
+#define UNASSIGNED_INDEX MDDI_MAX_NUM_LLIST_ITEMS
+#define MDDI_FIRST_DYNAMIC_LLIST_IDX 0
+
+/* Static llist items can be used for applications that frequently send
+ * the same set of packets using the linked list interface. */
+/* Here we configure for 6 static linked list items:
+ *  The 1st is used for a the adaptive backlight setting.
+ *  and the remaining 5 are used for sending window adjustments for
+ *  MDDI clients that need windowing info sent separate from video
+ *  packets. */
+#define MDDI_NUM_STATIC_ABL_ITEMS 1
+#define MDDI_NUM_STATIC_WINDOW_ITEMS 5
+#define MDDI_NUM_STATIC_LLIST_ITEMS (MDDI_NUM_STATIC_ABL_ITEMS + \
+				MDDI_NUM_STATIC_WINDOW_ITEMS)
+#define MDDI_NUM_DYNAMIC_LLIST_ITEMS (MDDI_MAX_NUM_LLIST_ITEMS - \
+				MDDI_NUM_STATIC_LLIST_ITEMS)
+
+#define MDDI_FIRST_STATIC_LLIST_IDX  MDDI_NUM_DYNAMIC_LLIST_ITEMS
+#define MDDI_FIRST_STATIC_ABL_IDX  MDDI_FIRST_STATIC_LLIST_IDX
+#define MDDI_FIRST_STATIC_WINDOW_IDX  (MDDI_FIRST_STATIC_LLIST_IDX + \
+				MDDI_NUM_STATIC_ABL_ITEMS)
+
+/* GPIO registers */
+#define VSYNC_WAKEUP_REG          0x80
+#define GPIO_REG                  0x81
+#define GPIO_OUTPUT_REG           0x82
+#define GPIO_INTERRUPT_REG        0x83
+#define GPIO_INTERRUPT_ENABLE_REG 0x84
+#define GPIO_POLARITY_REG         0x85
+
+/* Interrupt Bits */
+#define MDDI_INT_PRI_PTR_READ       0x0001
+#define MDDI_INT_SEC_PTR_READ       0x0002
+#define MDDI_INT_REV_DATA_AVAIL     0x0004
+#define MDDI_INT_DISP_REQ           0x0008
+#define MDDI_INT_PRI_UNDERFLOW      0x0010
+#define MDDI_INT_SEC_UNDERFLOW      0x0020
+#define MDDI_INT_REV_OVERFLOW       0x0040
+#define MDDI_INT_CRC_ERROR          0x0080
+#define MDDI_INT_MDDI_IN            0x0100
+#define MDDI_INT_PRI_OVERWRITE      0x0200
+#define MDDI_INT_SEC_OVERWRITE      0x0400
+#define MDDI_INT_REV_OVERWRITE      0x0800
+#define MDDI_INT_DMA_FAILURE        0x1000
+#define MDDI_INT_LINK_ACTIVE        0x2000
+#define MDDI_INT_IN_HIBERNATION     0x4000
+#define MDDI_INT_PRI_LINK_LIST_DONE 0x8000
+#define MDDI_INT_SEC_LINK_LIST_DONE 0x10000
+#define MDDI_INT_NO_CMD_PKTS_PEND   0x20000
+#define MDDI_INT_RTD_FAILURE        0x40000
+
+#define MDDI_INT_ERROR_CONDITIONS ( \
+	MDDI_INT_PRI_UNDERFLOW | MDDI_INT_SEC_UNDERFLOW | \
+	MDDI_INT_REV_OVERFLOW | MDDI_INT_CRC_ERROR | \
+	MDDI_INT_PRI_OVERWRITE | MDDI_INT_SEC_OVERWRITE | \
+	MDDI_INT_RTD_FAILURE | \
+	MDDI_INT_REV_OVERWRITE | MDDI_INT_DMA_FAILURE)
+
+#define MDDI_INT_LINK_STATE_CHANGES ( \
+	MDDI_INT_LINK_ACTIVE | MDDI_INT_IN_HIBERNATION)
+
+/* Status Bits */
+#define MDDI_STAT_LINK_ACTIVE        0x0001
+#define MDDI_STAT_NEW_REV_PTR        0x0002
+#define MDDI_STAT_NEW_PRI_PTR        0x0004
+#define MDDI_STAT_NEW_SEC_PTR        0x0008
+#define MDDI_STAT_IN_HIBERNATION     0x0010
+#define MDDI_STAT_PRI_LINK_LIST_DONE 0x0020
+#define MDDI_STAT_SEC_LINK_LIST_DONE 0x0040
+#define MDDI_STAT_PENDING_TIMING_PKT 0x0080
+#define MDDI_STAT_PENDING_REV_ENCAP  0x0100
+#define MDDI_STAT_PENDING_POWERDOWN  0x0200
+#define MDDI_STAT_RTD_MEAS_FAIL      0x0800
+#define MDDI_STAT_CLIENT_WAKEUP_REQ  0x1000
+
+/* Command Bits */
+#define MDDI_CMD_POWERDOWN           0x0100
+#define MDDI_CMD_POWERUP             0x0200
+#define MDDI_CMD_HIBERNATE           0x0300
+#define MDDI_CMD_RESET               0x0400
+#define MDDI_CMD_DISP_IGNORE         0x0501
+#define MDDI_CMD_DISP_LISTEN         0x0500
+#define MDDI_CMD_SEND_REV_ENCAP      0x0600
+#define MDDI_CMD_GET_CLIENT_CAP      0x0601
+#define MDDI_CMD_GET_CLIENT_STATUS   0x0602
+#define MDDI_CMD_SEND_RTD            0x0700
+#define MDDI_CMD_LINK_ACTIVE         0x0900
+#define MDDI_CMD_PERIODIC_REV_ENCAP  0x0A00
+
+extern void mddi_host_init(mddi_host_type host);
+extern void mddi_host_powerdown(mddi_host_type host);
+extern uint16 mddi_get_next_free_llist_item(mddi_host_type host, boolean wait);
+extern uint16 mddi_get_reg_read_llist_item(mddi_host_type host, boolean wait);
+extern void mddi_queue_forward_packets(uint16 first_llist_idx,
+				       uint16 last_llist_idx,
+				       boolean wait,
+				       mddi_llist_done_cb_type llist_done_cb,
+				       mddi_host_type host);
+
+extern void mddi_host_write_pix_attr_reg(uint32 value);
+extern void mddi_client_lcd_gpio_poll(uint32 poll_reg_val);
+extern void mddi_client_lcd_vsync_detected(boolean detected);
+extern void mddi_host_disable_hibernation(boolean disable);
+
+extern mddi_linked_list_type *llist_extern[];
+extern mddi_linked_list_type *llist_dma_extern[];
+extern mddi_linked_list_notify_type *llist_extern_notify[];
+extern struct timer_list mddi_host_timer;
+
+typedef struct {
+	uint16 transmitting_start_idx;
+	uint16 transmitting_end_idx;
+	uint16 waiting_start_idx;
+	uint16 waiting_end_idx;
+	uint16 reg_read_idx;
+	uint16 next_free_idx;
+	boolean reg_read_waiting;
+} mddi_llist_info_type;
+
+extern mddi_llist_info_type mddi_llist;
+
+#define MDDI_GPIO_DEFAULT_POLLING_INTERVAL 200
+typedef struct {
+	uint32 polling_reg;
+	uint32 polling_val;
+	uint32 polling_interval;
+	boolean polling_enabled;
+} mddi_gpio_info_type;
+
+uint32 mddi_get_client_id(void);
+void mddi_mhctl_remove(mddi_host_type host_idx);
+void mddi_host_timer_service(unsigned long data);
+#endif /* MDDIHOSTI_H */
diff --git a/drivers/staging/msm/mdp.c b/drivers/staging/msm/mdp.c
new file mode 100644
index 00000000000..36053afdebe
--- /dev/null
+++ b/drivers/staging/msm/mdp.c
@@ -0,0 +1,1113 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#ifdef CONFIG_FB_MSM_MDP40
+#include "mdp4.h"
+#endif
+
+static struct clk *mdp_clk;
+static struct clk *mdp_pclk;
+
+struct completion mdp_ppp_comp;
+struct semaphore mdp_ppp_mutex;
+struct semaphore mdp_pipe_ctrl_mutex;
+
+unsigned long mdp_timer_duration = (HZ);   /* 1 sec */
+/* unsigned long mdp_mdp_timer_duration=0; */
+
+boolean mdp_ppp_waiting = FALSE;
+uint32 mdp_tv_underflow_cnt;
+uint32 mdp_lcdc_underflow_cnt;
+
+boolean mdp_current_clk_on = FALSE;
+boolean mdp_is_in_isr = FALSE;
+
+/*
+ * legacy mdp_in_processing is only for DMA2-MDDI
+ * this applies to DMA2 block only
+ */
+uint32 mdp_in_processing = FALSE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+uint32 mdp_intr_mask = MDP4_ANY_INTR_MASK;
+#else
+uint32 mdp_intr_mask = MDP_ANY_INTR_MASK;
+#endif
+
+MDP_BLOCK_TYPE mdp_debug[MDP_MAX_BLOCK];
+
+int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+
+spinlock_t mdp_spin_lock;
+struct workqueue_struct *mdp_dma_wq;	/*mdp dma wq */
+struct workqueue_struct *mdp_vsync_wq;	/*mdp vsync wq */
+
+static struct workqueue_struct *mdp_pipe_ctrl_wq; /* mdp mdp pipe ctrl wq */
+static struct delayed_work mdp_pipe_ctrl_worker;
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_dma_data dma2_data;
+struct mdp_dma_data dma_s_data;
+struct mdp_dma_data dma_e_data;
+#else
+static struct mdp_dma_data dma2_data;
+static struct mdp_dma_data dma_s_data;
+static struct mdp_dma_data dma_e_data;
+#endif
+static struct mdp_dma_data dma3_data;
+
+extern ktime_t mdp_dma2_last_update_time;
+
+extern uint32 mdp_dma2_update_time_in_usec;
+extern int mdp_lcd_rd_cnt_offset_slow;
+extern int mdp_lcd_rd_cnt_offset_fast;
+extern int mdp_usec_diff_threshold;
+
+#ifdef CONFIG_FB_MSM_LCDC
+extern int mdp_lcdc_pclk_clk_rate;
+extern int mdp_lcdc_pad_pclk_clk_rate;
+extern int first_pixel_start_x;
+extern int first_pixel_start_y;
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+struct dentry *mdp_dir;
+#endif
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state);
+#else
+#define mdp_suspend NULL
+#endif
+
+struct timeval mdp_dma2_timeval;
+struct timeval mdp_ppp_timeval;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static struct early_suspend early_suspend;
+#endif
+
+#ifndef CONFIG_FB_MSM_MDP22
+DEFINE_MUTEX(mdp_lut_push_sem);
+static int mdp_lut_i;
+static int mdp_lut_hw_update(struct fb_cmap *cmap)
+{
+	int i;
+	u16 *c[3];
+	u16 r, g, b;
+
+	c[0] = cmap->green;
+	c[1] = cmap->blue;
+	c[2] = cmap->red;
+
+	for (i = 0; i < cmap->len; i++) {
+		if (copy_from_user(&r, cmap->red++, sizeof(r)) ||
+		    copy_from_user(&g, cmap->green++, sizeof(g)) ||
+		    copy_from_user(&b, cmap->blue++, sizeof(b)))
+			return -EFAULT;
+
+#ifdef CONFIG_FB_MSM_MDP40
+		MDP_OUTP(MDP_BASE + 0x94800 +
+#else
+		MDP_OUTP(MDP_BASE + 0x93800 +
+#endif
+			(0x400*mdp_lut_i) + cmap->start*4 + i*4,
+				((g & 0xff) |
+				 ((b & 0xff) << 8) |
+				 ((r & 0xff) << 16)));
+	}
+
+	return 0;
+}
+
+static int mdp_lut_push;
+static int mdp_lut_push_i;
+static int mdp_lut_update_nonlcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+	int ret;
+
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	ret = mdp_lut_hw_update(cmap);
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	if (ret)
+		return ret;
+
+	mutex_lock(&mdp_lut_push_sem);
+	mdp_lut_push = 1;
+	mdp_lut_push_i = mdp_lut_i;
+	mutex_unlock(&mdp_lut_push_sem);
+
+	mdp_lut_i = (mdp_lut_i + 1)%2;
+
+	return 0;
+}
+
+static int mdp_lut_update_lcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+	int ret;
+
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	ret = mdp_lut_hw_update(cmap);
+
+	if (ret) {
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+		return ret;
+	}
+
+	MDP_OUTP(MDP_BASE + 0x90070, (mdp_lut_i << 10) | 0x17);
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_lut_i = (mdp_lut_i + 1)%2;
+
+	return 0;
+}
+
+#define MDP_HIST_MAX_BIN 32
+static __u32 mdp_hist_r[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_g[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_b[MDP_HIST_MAX_BIN];
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_histogram mdp_hist;
+struct completion mdp_hist_comp;
+#else
+static struct mdp_histogram mdp_hist;
+static struct completion mdp_hist_comp;
+#endif
+
+static int mdp_do_histogram(struct fb_info *info, struct mdp_histogram *hist)
+{
+	int ret = 0;
+
+	if (!hist->frame_cnt || (hist->bin_cnt == 0) ||
+				 (hist->bin_cnt > MDP_HIST_MAX_BIN))
+		return -EINVAL;
+
+	INIT_COMPLETION(mdp_hist_comp);
+
+	mdp_hist.bin_cnt = hist->bin_cnt;
+	mdp_hist.r = (hist->r) ? mdp_hist_r : 0;
+	mdp_hist.g = (hist->g) ? mdp_hist_g : 0;
+	mdp_hist.b = (hist->b) ? mdp_hist_b : 0;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	MDP_OUTP(MDP_BASE + 0x95004, hist->frame_cnt);
+	MDP_OUTP(MDP_BASE + 0x95000, 1);
+#else
+	MDP_OUTP(MDP_BASE + 0x94004, hist->frame_cnt);
+	MDP_OUTP(MDP_BASE + 0x94000, 1);
+#endif
+	wait_for_completion_killable(&mdp_hist_comp);
+
+	if (hist->r) {
+		ret = copy_to_user(hist->r, mdp_hist.r, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	if (hist->g) {
+		ret = copy_to_user(hist->g, mdp_hist.g, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	if (hist->b) {
+		ret = copy_to_user(hist->b, mdp_hist.b, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	return 0;
+
+hist_err:
+	printk(KERN_ERR "%s: invalid hist buffer\n", __func__);
+	return ret;
+}
+#endif
+
+/* Returns < 0 on error, 0 on timeout, or > 0 on successful wait */
+
+int mdp_ppp_pipe_wait(void)
+{
+	int ret = 1;
+
+	/* wait 5 seconds for the operation to complete before declaring
+	the MDP hung */
+
+	if (mdp_ppp_waiting == TRUE) {
+		ret = wait_for_completion_interruptible_timeout(&mdp_ppp_comp,
+								5 * HZ);
+
+		if (!ret)
+			printk(KERN_ERR "%s: Timed out waiting for the MDP.\n",
+					__func__);
+	}
+
+	return ret;
+}
+
+static DEFINE_SPINLOCK(mdp_lock);
+static int mdp_irq_mask;
+static int mdp_irq_enabled;
+
+void mdp_enable_irq(uint32 term)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&mdp_lock, irq_flags);
+	if (mdp_irq_mask & term) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is already set\n", term);
+	} else {
+		mdp_irq_mask |= term;
+		if (mdp_irq_mask && !mdp_irq_enabled) {
+			mdp_irq_enabled = 1;
+			enable_irq(INT_MDP);
+		}
+	}
+	spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq(uint32 term)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&mdp_lock, irq_flags);
+	if (!(mdp_irq_mask & term)) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+	} else {
+		mdp_irq_mask &= ~term;
+		if (!mdp_irq_mask && mdp_irq_enabled) {
+			mdp_irq_enabled = 0;
+			disable_irq(INT_MDP);
+		}
+	}
+	spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq_nolock(uint32 term)
+{
+
+	if (!(mdp_irq_mask & term)) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+	} else {
+		mdp_irq_mask &= ~term;
+		if (!mdp_irq_mask && mdp_irq_enabled) {
+			mdp_irq_enabled = 0;
+			disable_irq(INT_MDP);
+		}
+	}
+}
+
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd)
+{
+
+	dmb();	/* memory barrier */
+
+	/* kick off PPP engine */
+	if (term == MDP_PPP_TERM) {
+		if (mdp_debug[MDP_PPP_BLOCK])
+			jiffies_to_timeval(jiffies, &mdp_ppp_timeval);
+
+		/* let's turn on PPP block */
+		mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		mdp_enable_irq(term);
+		INIT_COMPLETION(mdp_ppp_comp);
+		mdp_ppp_waiting = TRUE;
+		outpdw(MDP_BASE + 0x30, 0x1000);
+		wait_for_completion_killable(&mdp_ppp_comp);
+		mdp_disable_irq(term);
+
+		if (mdp_debug[MDP_PPP_BLOCK]) {
+			struct timeval now;
+
+			jiffies_to_timeval(jiffies, &now);
+			mdp_ppp_timeval.tv_usec =
+			    now.tv_usec - mdp_ppp_timeval.tv_usec;
+			MSM_FB_INFO("MDP-PPP: %d\n",
+				    (int)mdp_ppp_timeval.tv_usec);
+		}
+	} else if (term == MDP_DMA2_TERM) {
+		if (mdp_debug[MDP_DMA2_BLOCK]) {
+			MSM_FB_INFO("MDP-DMA2: %d\n",
+				    (int)mdp_dma2_timeval.tv_usec);
+			jiffies_to_timeval(jiffies, &mdp_dma2_timeval);
+		}
+		/* DMA update timestamp */
+		mdp_dma2_last_update_time = ktime_get_real();
+		/* let's turn on DMA2 block */
+#if 0
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+#endif
+#ifdef CONFIG_FB_MSM_MDP22
+		outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x0044, 0x0);/* start DMA */
+#else
+		if (mdp_lut_push) {
+			mutex_lock(&mdp_lut_push_sem);
+			mdp_lut_push = 0;
+			MDP_OUTP(MDP_BASE + 0x90070,
+					(mdp_lut_push_i << 10) | 0x17);
+			mutex_unlock(&mdp_lut_push_sem);
+		}
+#ifdef CONFIG_FB_MSM_MDP40
+		outpdw(MDP_BASE + 0x000c, 0x0);	/* start DMA */
+#else
+		outpdw(MDP_BASE + 0x0044, 0x0);	/* start DMA */
+#endif
+#endif
+#ifdef CONFIG_FB_MSM_MDP40
+	} else if (term == MDP_DMA_S_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0010, 0x0);	/* start DMA */
+	} else if (term == MDP_DMA_E_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_E_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0014, 0x0);	/* start DMA */
+	} else if (term == MDP_OVERLAY0_TERM) {
+		mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0004, 0);
+	} else if (term == MDP_OVERLAY1_TERM) {
+		mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0008, 0);
+	}
+#else
+	} else if (term == MDP_DMA_S_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0048, 0x0);	/* start DMA */
+	}
+#endif
+}
+
+static void mdp_pipe_ctrl_workqueue_handler(struct work_struct *work)
+{
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr)
+{
+	boolean mdp_all_blocks_off = TRUE;
+	int i;
+	unsigned long flag;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	if (MDP_BLOCK_POWER_ON == state) {
+		mdp_block_power_cnt[block]++;
+
+		if (MDP_DMA2_BLOCK == block)
+			mdp_in_processing = TRUE;
+	} else {
+		mdp_block_power_cnt[block]--;
+
+		if (mdp_block_power_cnt[block] < 0) {
+			/*
+			* Master has to serve a request to power off MDP always
+			* It also has a timer to power off.  So, in case of
+			* timer expires first and DMA2 finishes later,
+			* master has to power off two times
+			* There shouldn't be multiple power-off request for
+			* other blocks
+			*/
+			if (block != MDP_MASTER_BLOCK) {
+				MSM_FB_INFO("mdp_block_power_cnt[block=%d] \
+				multiple power-off request\n", block);
+			}
+			mdp_block_power_cnt[block] = 0;
+		}
+
+		if (MDP_DMA2_BLOCK == block)
+			mdp_in_processing = FALSE;
+	}
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	/*
+	 * If it's in isr, we send our request to workqueue.
+	 * Otherwise, processing happens in the current context
+	 */
+	if (isr) {
+		/* checking all blocks power state */
+		for (i = 0; i < MDP_MAX_BLOCK; i++) {
+			if (mdp_block_power_cnt[i] > 0)
+				mdp_all_blocks_off = FALSE;
+		}
+
+		if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+			/* send workqueue to turn off mdp power */
+			queue_delayed_work(mdp_pipe_ctrl_wq,
+					   &mdp_pipe_ctrl_worker,
+					   mdp_timer_duration);
+		}
+	} else {
+		down(&mdp_pipe_ctrl_mutex);
+		/* checking all blocks power state */
+		for (i = 0; i < MDP_MAX_BLOCK; i++) {
+			if (mdp_block_power_cnt[i] > 0)
+				mdp_all_blocks_off = FALSE;
+		}
+
+		/*
+		 * find out whether a delayable work item is currently
+		 * pending
+		 */
+
+		if (delayed_work_pending(&mdp_pipe_ctrl_worker)) {
+			/*
+			 * try to cancel the current work if it fails to
+			 * stop (which means del_timer can't delete it
+			 * from the list, it's about to expire and run),
+			 * we have to let it run. queue_delayed_work won't
+			 * accept the next job which is same as
+			 * queue_delayed_work(mdp_timer_duration = 0)
+			 */
+			cancel_delayed_work(&mdp_pipe_ctrl_worker);
+		}
+
+		if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+			if (block == MDP_MASTER_BLOCK) {
+				mdp_current_clk_on = FALSE;
+				/* turn off MDP clks */
+				if (mdp_clk != NULL) {
+					clk_disable(mdp_clk);
+					MSM_FB_DEBUG("MDP CLK OFF\n");
+				}
+				if (mdp_pclk != NULL) {
+					clk_disable(mdp_pclk);
+					MSM_FB_DEBUG("MDP PCLK OFF\n");
+				}
+			} else {
+				/* send workqueue to turn off mdp power */
+				queue_delayed_work(mdp_pipe_ctrl_wq,
+						   &mdp_pipe_ctrl_worker,
+						   mdp_timer_duration);
+			}
+		} else if ((!mdp_all_blocks_off) && (!mdp_current_clk_on)) {
+			mdp_current_clk_on = TRUE;
+			/* turn on MDP clks */
+			if (mdp_clk != NULL) {
+				clk_enable(mdp_clk);
+				MSM_FB_DEBUG("MDP CLK ON\n");
+			}
+			if (mdp_pclk != NULL) {
+				clk_enable(mdp_pclk);
+				MSM_FB_DEBUG("MDP PCLK ON\n");
+			}
+		}
+		up(&mdp_pipe_ctrl_mutex);
+	}
+}
+
+#ifndef CONFIG_FB_MSM_MDP40
+irqreturn_t mdp_isr(int irq, void *ptr)
+{
+	uint32 mdp_interrupt = 0;
+	struct mdp_dma_data *dma;
+
+	mdp_is_in_isr = TRUE;
+	do {
+		mdp_interrupt = inp32(MDP_INTR_STATUS);
+		outp32(MDP_INTR_CLEAR, mdp_interrupt);
+
+		mdp_interrupt &= mdp_intr_mask;
+
+		if (mdp_interrupt & TV_ENC_UNDERRUN) {
+			mdp_interrupt &= ~(TV_ENC_UNDERRUN);
+			mdp_tv_underflow_cnt++;
+		}
+
+		if (!mdp_interrupt)
+			break;
+
+		/* DMA3 TV-Out Start */
+		if (mdp_interrupt & TV_OUT_DMA3_START) {
+			/* let's disable TV out interrupt */
+			mdp_intr_mask &= ~TV_OUT_DMA3_START;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+			dma = &dma3_data;
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+#ifndef CONFIG_FB_MSM_MDP22
+		if (mdp_interrupt & MDP_HIST_DONE) {
+			outp32(MDP_BASE + 0x94018, 0x3);
+			outp32(MDP_INTR_CLEAR, MDP_HIST_DONE);
+			if (mdp_hist.r)
+				memcpy(mdp_hist.r, MDP_BASE + 0x94100,
+						mdp_hist.bin_cnt*4);
+			if (mdp_hist.g)
+				memcpy(mdp_hist.g, MDP_BASE + 0x94200,
+						mdp_hist.bin_cnt*4);
+			if (mdp_hist.b)
+				memcpy(mdp_hist.b, MDP_BASE + 0x94300,
+						mdp_hist.bin_cnt*4);
+			complete(&mdp_hist_comp);
+		}
+
+		/* LCDC UnderFlow */
+		if (mdp_interrupt & LCDC_UNDERFLOW) {
+			mdp_lcdc_underflow_cnt++;
+		}
+		/* LCDC Frame Start */
+		if (mdp_interrupt & LCDC_FRAME_START) {
+			/* let's disable LCDC interrupt */
+			mdp_intr_mask &= ~LCDC_FRAME_START;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+			dma = &dma2_data;
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+
+		/* DMA2 LCD-Out Complete */
+		if (mdp_interrupt & MDP_DMA_S_DONE) {
+			dma = &dma_s_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_OFF,
+				      TRUE);
+			complete(&dma->comp);
+		}
+#endif
+
+		/* DMA2 LCD-Out Complete */
+		if (mdp_interrupt & MDP_DMA_P_DONE) {
+			struct timeval now;
+			ktime_t now_k;
+
+			now_k = ktime_get_real();
+			mdp_dma2_last_update_time.tv.sec =
+			    now_k.tv.sec - mdp_dma2_last_update_time.tv.sec;
+			mdp_dma2_last_update_time.tv.nsec =
+			    now_k.tv.nsec - mdp_dma2_last_update_time.tv.nsec;
+
+			if (mdp_debug[MDP_DMA2_BLOCK]) {
+				jiffies_to_timeval(jiffies, &now);
+				mdp_dma2_timeval.tv_usec =
+				    now.tv_usec - mdp_dma2_timeval.tv_usec;
+			}
+
+			dma = &dma2_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF,
+				      TRUE);
+			complete(&dma->comp);
+		}
+		/* PPP Complete */
+		if (mdp_interrupt & MDP_PPP_DONE) {
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+			mdp_ppp_djob_done();
+#else
+			mdp_pipe_ctrl(MDP_PPP_BLOCK,
+				MDP_BLOCK_POWER_OFF, TRUE);
+			if (mdp_ppp_waiting) {
+				mdp_ppp_waiting = FALSE;
+				complete(&mdp_ppp_comp);
+			}
+#endif
+		}
+	} while (1);
+
+	mdp_is_in_isr = FALSE;
+
+	return IRQ_HANDLED;
+}
+#endif
+
+static void mdp_drv_init(void)
+{
+	int i;
+
+	for (i = 0; i < MDP_MAX_BLOCK; i++) {
+		mdp_debug[i] = 0;
+	}
+
+	/* initialize spin lock and workqueue */
+	spin_lock_init(&mdp_spin_lock);
+	mdp_dma_wq = create_singlethread_workqueue("mdp_dma_wq");
+	mdp_vsync_wq = create_singlethread_workqueue("mdp_vsync_wq");
+	mdp_pipe_ctrl_wq = create_singlethread_workqueue("mdp_pipe_ctrl_wq");
+	INIT_DELAYED_WORK(&mdp_pipe_ctrl_worker,
+			  mdp_pipe_ctrl_workqueue_handler);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	mdp_ppp_dq_init();
+#endif
+
+	/* initialize semaphore */
+	init_completion(&mdp_ppp_comp);
+	init_MUTEX(&mdp_ppp_mutex);
+	init_MUTEX(&mdp_pipe_ctrl_mutex);
+
+	dma2_data.busy = FALSE;
+	dma2_data.waiting = FALSE;
+	init_completion(&dma2_data.comp);
+	init_MUTEX(&dma2_data.mutex);
+	mutex_init(&dma2_data.ov_mutex);
+
+	dma3_data.busy = FALSE;
+	dma3_data.waiting = FALSE;
+	init_completion(&dma3_data.comp);
+	init_MUTEX(&dma3_data.mutex);
+
+	dma_s_data.busy = FALSE;
+	dma_s_data.waiting = FALSE;
+	init_completion(&dma_s_data.comp);
+	init_MUTEX(&dma_s_data.mutex);
+
+	dma_e_data.busy = FALSE;
+	dma_e_data.waiting = FALSE;
+	init_completion(&dma_e_data.comp);
+
+#ifndef CONFIG_FB_MSM_MDP22
+	init_completion(&mdp_hist_comp);
+#endif
+
+	/* initializing mdp power block counter to 0 */
+	for (i = 0; i < MDP_MAX_BLOCK; i++) {
+		mdp_block_power_cnt[i] = 0;
+	}
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+		char sub_name[] = "mdp";
+
+		root = msm_fb_get_debugfs_root();
+		if (root != NULL) {
+			mdp_dir = debugfs_create_dir(sub_name, root);
+
+			if (mdp_dir) {
+				msm_fb_debugfs_file_create(mdp_dir,
+					"dma2_update_time_in_usec",
+					(u32 *) &mdp_dma2_update_time_in_usec);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"vs_rdcnt_slow",
+					(u32 *) &mdp_lcd_rd_cnt_offset_slow);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"vs_rdcnt_fast",
+					(u32 *) &mdp_lcd_rd_cnt_offset_fast);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_usec_diff_threshold",
+					(u32 *) &mdp_usec_diff_threshold);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_current_clk_on",
+					(u32 *) &mdp_current_clk_on);
+#ifdef CONFIG_FB_MSM_LCDC
+				msm_fb_debugfs_file_create(mdp_dir,
+					"lcdc_start_x",
+					(u32 *) &first_pixel_start_x);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"lcdc_start_y",
+					(u32 *) &first_pixel_start_y);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_lcdc_pclk_clk_rate",
+					(u32 *) &mdp_lcdc_pclk_clk_rate);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_lcdc_pad_pclk_clk_rate",
+					(u32 *) &mdp_lcdc_pad_pclk_clk_rate);
+#endif
+			}
+		}
+	}
+#endif
+}
+
+static int mdp_probe(struct platform_device *pdev);
+static int mdp_remove(struct platform_device *pdev);
+
+static struct platform_driver mdp_driver = {
+	.probe = mdp_probe,
+	.remove = mdp_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+	.suspend = mdp_suspend,
+	.resume = NULL,
+#endif
+	.shutdown = NULL,
+	.driver = {
+		/*
+		 * Driver name must match the device name added in
+		 * platform.c.
+		 */
+		.name = "mdp",
+	},
+};
+
+static int mdp_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+	struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+	ret = panel_next_off(pdev);
+
+#ifdef MDP_HW_VSYNC
+	mdp_hw_vsync_clk_disable(mfd);
+#endif
+
+	return ret;
+}
+
+static int mdp_on(struct platform_device *pdev)
+{
+#ifdef MDP_HW_VSYNC
+	struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+	int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+	mdp_hw_vsync_clk_enable(mfd);
+#endif
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mdp_irq_clk_setup(void)
+{
+	int ret;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	ret = request_irq(INT_MDP, mdp4_isr, IRQF_DISABLED, "MDP", 0);
+#else
+	ret = request_irq(INT_MDP, mdp_isr, IRQF_DISABLED, "MDP", 0);
+#endif
+	if (ret) {
+		printk(KERN_ERR "mdp request_irq() failed!\n");
+		return ret;
+	}
+	disable_irq(INT_MDP);
+
+	mdp_clk = clk_get(NULL, "mdp_clk");
+
+	if (IS_ERR(mdp_clk)) {
+		ret = PTR_ERR(mdp_clk);
+		printk(KERN_ERR "can't get mdp_clk error:%d!\n", ret);
+		free_irq(INT_MDP, 0);
+		return ret;
+	}
+
+	mdp_pclk = clk_get(NULL, "mdp_pclk");
+	if (IS_ERR(mdp_pclk))
+		mdp_pclk = NULL;
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	/*
+	 * mdp_clk should greater than mdp_pclk always
+	 */
+	clk_set_rate(mdp_clk, 122880000); /* 122.88 Mhz */
+	printk(KERN_INFO "mdp_clk: mdp_clk=%d mdp_pclk=%d\n",
+		(int)clk_get_rate(mdp_clk), (int)clk_get_rate(mdp_pclk));
+#endif
+
+	return 0;
+}
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static int mdp_resource_initialized;
+static struct msm_panel_common_pdata *mdp_pdata;
+
+static int mdp_probe(struct platform_device *pdev)
+{
+	struct platform_device *msm_fb_dev = NULL;
+	struct msm_fb_data_type *mfd;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t  size ;
+#ifdef CONFIG_FB_MSM_MDP40
+	int intf, if_no;
+#else
+	unsigned long flag;
+#endif
+
+	if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+		mdp_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_mdp_base = ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("MDP HW Base phy_Address = 0x%x virt = 0x%x\n",
+			(int)pdev->resource[0].start, (int)msm_mdp_base);
+
+		if (unlikely(!msm_mdp_base))
+			return -ENOMEM;
+
+		printk("irq clk setup\n");
+		rc = mdp_irq_clk_setup();
+		printk("irq clk setup done\n");
+		if (rc)
+			return rc;
+
+		/* initializing mdp hw */
+#ifdef CONFIG_FB_MSM_MDP40
+		mdp4_hw_init();
+#else
+		mdp_hw_init();
+#endif
+
+		mdp_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mdp_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	msm_fb_dev = platform_device_alloc("msm_fb", pdev->id);
+	if (!msm_fb_dev)
+		return -ENOMEM;
+
+	/* link to the latest pdev */
+	mfd->pdev = msm_fb_dev;
+
+	/* add panel data */
+	if (platform_device_add_data
+	    (msm_fb_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mdp_probe: platform_device_add_data failed!\n");
+		rc = -ENOMEM;
+		goto mdp_probe_err;
+	}
+	/* data chain */
+	pdata = msm_fb_dev->dev.platform_data;
+	pdata->on = mdp_on;
+	pdata->off = mdp_off;
+	pdata->next = pdev;
+
+	switch (mfd->panel.type) {
+	case EXT_MDDI_PANEL:
+	case MDDI_PANEL:
+	case EBI2_PANEL:
+		INIT_WORK(&mfd->dma_update_worker,
+			  mdp_lcd_update_workqueue_handler);
+		INIT_WORK(&mfd->vsync_resync_worker,
+			  mdp_vsync_resync_workqueue_handler);
+		mfd->hw_refresh = FALSE;
+
+		if (mfd->panel.type == EXT_MDDI_PANEL) {
+			/* 15 fps -> 66 msec */
+			mfd->refresh_timer_duration = (66 * HZ / 1000);
+		} else {
+			/* 24 fps -> 42 msec */
+			mfd->refresh_timer_duration = (42 * HZ / 1000);
+		}
+
+#ifdef CONFIG_FB_MSM_MDP22
+		mfd->dma_fnc = mdp_dma2_update;
+		mfd->dma = &dma2_data;
+#else
+		if (mfd->panel_info.pdest == DISPLAY_1) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+			mfd->dma_fnc = mdp4_mddi_overlay;
+#else
+			mfd->dma_fnc = mdp_dma2_update;
+#endif
+			mfd->dma = &dma2_data;
+			mfd->lut_update = mdp_lut_update_nonlcdc;
+			mfd->do_histogram = mdp_do_histogram;
+		} else {
+			mfd->dma_fnc = mdp_dma_s_update;
+			mfd->dma = &dma_s_data;
+		}
+#endif
+		if (mdp_pdata)
+			mfd->vsync_gpio = mdp_pdata->gpio;
+		else
+			mfd->vsync_gpio = -1;
+
+#ifdef CONFIG_FB_MSM_MDP40
+		if (mfd->panel.type == EBI2_PANEL)
+			intf = EBI2_INTF;
+		else
+			intf = MDDI_INTF;
+
+		if (mfd->panel_info.pdest == DISPLAY_1)
+			if_no = PRIMARY_INTF_SEL;
+		else
+			if_no = SECONDARY_INTF_SEL;
+
+		mdp4_display_intf_sel(if_no, intf);
+#endif
+		mdp_config_vsync(mfd);
+		break;
+
+	case HDMI_PANEL:
+	case LCDC_PANEL:
+		pdata->on = mdp_lcdc_on;
+		pdata->off = mdp_lcdc_off;
+		mfd->hw_refresh = TRUE;
+		mfd->cursor_update = mdp_hw_cursor_update;
+#ifndef CONFIG_FB_MSM_MDP22
+		mfd->lut_update = mdp_lut_update_lcdc;
+		mfd->do_histogram = mdp_do_histogram;
+#endif
+#ifdef CONFIG_FB_MSM_OVERLAY
+		mfd->dma_fnc = mdp4_lcdc_overlay;
+#else
+		mfd->dma_fnc = mdp_lcdc_update;
+#endif
+
+#ifdef CONFIG_FB_MSM_MDP40
+		if (mfd->panel.type == HDMI_PANEL) {
+			mfd->dma = &dma_e_data;
+			mdp4_display_intf_sel(EXTERNAL_INTF_SEL, LCDC_RGB_INTF);
+		} else {
+			mfd->dma = &dma2_data;
+			mdp4_display_intf_sel(PRIMARY_INTF_SEL, LCDC_RGB_INTF);
+		}
+#else
+		mfd->dma = &dma2_data;
+		spin_lock_irqsave(&mdp_spin_lock, flag);
+		mdp_intr_mask &= ~MDP_DMA_P_DONE;
+		outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+		spin_unlock_irqrestore(&mdp_spin_lock, flag);
+#endif
+		break;
+
+	case TV_PANEL:
+		pdata->on = mdp_dma3_on;
+		pdata->off = mdp_dma3_off;
+		mfd->hw_refresh = TRUE;
+		mfd->dma_fnc = mdp_dma3_update;
+		mfd->dma = &dma3_data;
+		break;
+
+	default:
+		printk(KERN_ERR "mdp_probe: unknown device type!\n");
+		rc = -ENODEV;
+		goto mdp_probe_err;
+	}
+
+	/* set driver data */
+	platform_set_drvdata(msm_fb_dev, mfd);
+
+	rc = platform_device_add(msm_fb_dev);
+	if (rc) {
+		goto mdp_probe_err;
+	}
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+      mdp_probe_err:
+	platform_device_put(msm_fb_dev);
+	return rc;
+}
+
+static void mdp_suspend_sub(void)
+{
+	/* cancel pipe ctrl worker */
+	cancel_delayed_work(&mdp_pipe_ctrl_worker);
+
+	/* for workder can't be cancelled... */
+	flush_workqueue(mdp_pipe_ctrl_wq);
+
+	/* let's wait for PPP completion */
+	while (mdp_block_power_cnt[MDP_PPP_BLOCK] > 0) ;
+
+	/* try to power down */
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	mdp_suspend_sub();
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mdp_early_suspend(struct early_suspend *h)
+{
+	mdp_suspend_sub();
+}
+#endif
+
+static int mdp_remove(struct platform_device *pdev)
+{
+	iounmap(msm_mdp_base);
+	return 0;
+}
+
+static int mdp_register_driver(void)
+{
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 1;
+	early_suspend.suspend = mdp_early_suspend;
+	register_early_suspend(&early_suspend);
+#endif
+
+	return platform_driver_register(&mdp_driver);
+}
+
+static int __init mdp_driver_init(void)
+{
+	int ret;
+
+	mdp_drv_init();
+
+	ret = mdp_register_driver();
+	if (ret) {
+		printk(KERN_ERR "mdp_register_driver() failed!\n");
+		return ret;
+	}
+
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_FB_MSM_MDP40)
+	mdp4_debugfs_init();
+#endif
+
+	return 0;
+
+}
+
+module_init(mdp_driver_init);
diff --git a/drivers/staging/msm/mdp.h b/drivers/staging/msm/mdp.h
new file mode 100644
index 00000000000..0a5d6ac386a
--- /dev/null
+++ b/drivers/staging/msm/mdp.h
@@ -0,0 +1,695 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_H
+#define MDP_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/hrtimer.h>
+#include "msm_mdp.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#include "mdp_ppp_dq.h"
+#endif
+
+#ifdef BIT
+#undef BIT
+#endif
+
+#define BIT(x)  (1<<(x))
+
+#define MDPOP_NOP               0
+#define MDPOP_LR                BIT(0)	/* left to right flip */
+#define MDPOP_UD                BIT(1)	/* up and down flip */
+#define MDPOP_ROT90             BIT(2)	/* rotate image to 90 degree */
+#define MDPOP_ROT180            (MDPOP_UD|MDPOP_LR)
+#define MDPOP_ROT270            (MDPOP_ROT90|MDPOP_UD|MDPOP_LR)
+#define MDPOP_ASCALE            BIT(7)
+#define MDPOP_ALPHAB            BIT(8)	/* enable alpha blending */
+#define MDPOP_TRANSP            BIT(9)	/* enable transparency */
+#define MDPOP_DITHER            BIT(10)	/* enable dither */
+#define MDPOP_SHARPENING	BIT(11) /* enable sharpening */
+#define MDPOP_BLUR		BIT(12) /* enable blur */
+#define MDPOP_FG_PM_ALPHA       BIT(13)
+
+struct mdp_table_entry {
+	uint32_t reg;
+	uint32_t val;
+};
+
+extern struct mdp_ccs mdp_ccs_yuv2rgb ;
+extern struct mdp_ccs mdp_ccs_rgb2yuv ;
+
+/*
+ * MDP Image Structure
+ */
+typedef struct mdpImg_ {
+	uint32 imgType;		/* Image type */
+	uint32 *bmy_addr;	/* bitmap or y addr */
+	uint32 *cbcr_addr;	/* cbcr addr */
+	uint32 width;		/* image width */
+	uint32 mdpOp;		/* image opertion (rotation,flip up/down, alpha/tp) */
+	uint32 tpVal;		/* transparency color */
+	uint32 alpha;		/* alpha percentage 0%(0x0) ~ 100%(0x100) */
+	int    sp_value;        /* sharpening strength */
+} MDPIMG;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#define MDP_OUTP(addr, data)	mdp_ppp_outdw((uint32_t)(addr),	\
+					 (uint32_t)(data))
+#else
+#define MDP_OUTP(addr, data) outpdw((addr), (data))
+#endif
+
+#define MDP_KTIME2USEC(kt) (kt.tv.sec*1000000 + kt.tv.nsec/1000)
+
+#define MDP_BASE msm_mdp_base
+
+typedef enum {
+	MDP_BC_SCALE_POINT2_POINT4,
+	MDP_BC_SCALE_POINT4_POINT6,
+	MDP_BC_SCALE_POINT6_POINT8,
+	MDP_BC_SCALE_POINT8_1,
+	MDP_BC_SCALE_UP,
+	MDP_PR_SCALE_POINT2_POINT4,
+	MDP_PR_SCALE_POINT4_POINT6,
+	MDP_PR_SCALE_POINT6_POINT8,
+	MDP_PR_SCALE_POINT8_1,
+	MDP_PR_SCALE_UP,
+	MDP_SCALE_BLUR,
+	MDP_INIT_SCALE
+} MDP_SCALE_MODE;
+
+typedef enum {
+	MDP_BLOCK_POWER_OFF,
+	MDP_BLOCK_POWER_ON
+} MDP_BLOCK_POWER_STATE;
+
+typedef enum {
+	MDP_MASTER_BLOCK,
+	MDP_CMD_BLOCK,
+	MDP_PPP_BLOCK,
+	MDP_DMA2_BLOCK,
+	MDP_DMA3_BLOCK,
+	MDP_DMA_S_BLOCK,
+	MDP_DMA_E_BLOCK,
+	MDP_OVERLAY0_BLOCK,
+	MDP_OVERLAY1_BLOCK,
+	MDP_MAX_BLOCK
+} MDP_BLOCK_TYPE;
+
+/* Let's keep Q Factor power of 2 for optimization */
+#define MDP_SCALE_Q_FACTOR 512
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#else
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#endif
+
+/* SHIM Q Factor */
+#define PHI_Q_FACTOR          29
+#define PQF_PLUS_5            (PHI_Q_FACTOR + 5)	/* due to 32 phases */
+#define PQF_PLUS_4            (PHI_Q_FACTOR + 4)
+#define PQF_PLUS_2            (PHI_Q_FACTOR + 2)	/* to get 4.0 */
+#define PQF_MINUS_2           (PHI_Q_FACTOR - 2)	/* to get 0.25 */
+#define PQF_PLUS_5_PLUS_2     (PQF_PLUS_5 + 2)
+#define PQF_PLUS_5_MINUS_2    (PQF_PLUS_5 - 2)
+
+#define MDP_CONVTP(tpVal) (((tpVal&0xF800)<<8)|((tpVal&0x7E0)<<5)|((tpVal&0x1F)<<3))
+
+#define MDPOP_ROTATION (MDPOP_ROT90|MDPOP_LR|MDPOP_UD)
+#define MDP_CHKBIT(val, bit) ((bit) == ((val) & (bit)))
+
+/* overlay interface API defines */
+typedef enum {
+	MORE_IBUF,
+	FINAL_IBUF,
+	COMPLETE_IBUF
+} MDP_IBUF_STATE;
+
+struct mdp_dirty_region {
+	__u32 xoffset;		/* source origin in the x-axis */
+	__u32 yoffset;		/* source origin in the y-axis */
+	__u32 width;		/* number of pixels in the x-axis */
+	__u32 height;		/* number of pixels in the y-axis */
+};
+
+/*
+ * MDP extended data types
+ */
+typedef struct mdp_roi_s {
+	uint32 x;
+	uint32 y;
+	uint32 width;
+	uint32 height;
+	int32 lcd_x;
+	int32 lcd_y;
+	uint32 dst_width;
+	uint32 dst_height;
+} MDP_ROI;
+
+typedef struct mdp_ibuf_s {
+	uint8 *buf;
+	uint32 bpp;
+	uint32 ibuf_type;
+	uint32 ibuf_width;
+	uint32 ibuf_height;
+
+	MDP_ROI roi;
+	MDPIMG mdpImg;
+
+	int32 dma_x;
+	int32 dma_y;
+	uint32 dma_w;
+	uint32 dma_h;
+
+	uint32 vsync_enable;
+	uint32 visible_swapped;
+} MDPIBUF;
+
+struct mdp_dma_data {
+	boolean busy;
+	boolean waiting;
+	struct mutex ov_mutex;
+	struct semaphore mutex;
+	struct completion comp;
+};
+
+#define MDP_CMD_DEBUG_ACCESS_BASE   (MDP_BASE+0x10000)
+
+#define MDP_DMA2_TERM 0x1
+#define MDP_DMA3_TERM 0x2
+#define MDP_PPP_TERM 0x4
+#define MDP_DMA_S_TERM 0x8
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_DMA_E_TERM 0x10
+#define MDP_OVERLAY0_TERM 0x20
+#define MDP_OVERLAY1_TERM 0x40
+#endif
+
+#define ACTIVE_START_X_EN BIT(31)
+#define ACTIVE_START_Y_EN BIT(31)
+#define ACTIVE_HIGH 0
+#define ACTIVE_LOW 1
+#define MDP_DMA_S_DONE  BIT(2)
+#define LCDC_FRAME_START    BIT(15)
+#define LCDC_UNDERFLOW      BIT(16)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_DMA_P_DONE 	BIT(2)
+#else
+#define MDP_DMA_P_DONE 	BIT(14)
+#endif
+
+#define MDP_PPP_DONE 				BIT(0)
+#define TV_OUT_DMA3_DONE    BIT(6)
+#define TV_ENC_UNDERRUN     BIT(7)
+#define TV_OUT_DMA3_START   BIT(13)
+#define MDP_HIST_DONE       BIT(20)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+			MDP_DMA_P_DONE| \
+			TV_ENC_UNDERRUN)
+#else
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+			MDP_DMA_P_DONE| \
+			MDP_DMA_S_DONE| \
+			LCDC_UNDERFLOW| \
+			MDP_HIST_DONE| \
+			TV_ENC_UNDERRUN)
+#endif
+
+#define MDP_TOP_LUMA       16
+#define MDP_TOP_CHROMA     0
+#define MDP_BOTTOM_LUMA    19
+#define MDP_BOTTOM_CHROMA  3
+#define MDP_LEFT_LUMA      22
+#define MDP_LEFT_CHROMA    6
+#define MDP_RIGHT_LUMA     25
+#define MDP_RIGHT_CHROMA   9
+
+#define CLR_G 0x0
+#define CLR_B 0x1
+#define CLR_R 0x2
+#define CLR_ALPHA 0x3
+
+#define CLR_Y  CLR_G
+#define CLR_CB CLR_B
+#define CLR_CR CLR_R
+
+/* from lsb to msb */
+#define MDP_GET_PACK_PATTERN(a,x,y,z,bit) (((a)<<(bit*3))|((x)<<(bit*2))|((y)<<bit)|(z))
+
+/*
+ * 0x0000 0x0004 0x0008 MDP sync config
+ */
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_SYNCFG_HGT_LOC 22
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(21)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(20)
+#else
+#define MDP_SYNCFG_HGT_LOC 21
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(20)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(19)
+#define MDP_HW_VSYNC
+#endif
+
+/*
+ * 0x0018 MDP VSYNC THREASH
+ */
+#define MDP_PRIM_BELOW_LOC 0
+#define MDP_PRIM_ABOVE_LOC 8
+
+/*
+ * MDP_PRIMARY_VSYNC_OUT_CTRL
+ * 0x0080,84,88 internal vsync pulse config
+ */
+#define VSYNC_PULSE_EN BIT(31)
+#define VSYNC_PULSE_INV BIT(30)
+
+/*
+ * 0x008c MDP VSYNC CONTROL
+ */
+#define DISP0_VSYNC_MAP_VSYNC0 0
+#define DISP0_VSYNC_MAP_VSYNC1 BIT(0)
+#define DISP0_VSYNC_MAP_VSYNC2 BIT(0)|BIT(1)
+
+#define DISP1_VSYNC_MAP_VSYNC0 0
+#define DISP1_VSYNC_MAP_VSYNC1 BIT(2)
+#define DISP1_VSYNC_MAP_VSYNC2 BIT(2)|BIT(3)
+
+#define PRIMARY_LCD_SYNC_EN BIT(4)
+#define PRIMARY_LCD_SYNC_DISABLE 0
+
+#define SECONDARY_LCD_SYNC_EN BIT(5)
+#define SECONDARY_LCD_SYNC_DISABLE 0
+
+#define EXTERNAL_LCD_SYNC_EN BIT(6)
+#define EXTERNAL_LCD_SYNC_DISABLE 0
+
+/*
+ * 0x101f0 MDP VSYNC Threshold
+ */
+#define VSYNC_THRESHOLD_ABOVE_LOC 0
+#define VSYNC_THRESHOLD_BELOW_LOC 16
+#define VSYNC_ANTI_TEAR_EN BIT(31)
+
+/*
+ * 0x10004 command config
+ */
+#define MDP_CMD_DBGBUS_EN BIT(0)
+
+/*
+ * 0x10124 or 0x101d4PPP source config
+ */
+#define PPP_SRC_C0G_8BITS (BIT(1)|BIT(0))
+#define PPP_SRC_C1B_8BITS (BIT(3)|BIT(2))
+#define PPP_SRC_C2R_8BITS (BIT(5)|BIT(4))
+#define PPP_SRC_C3A_8BITS (BIT(7)|BIT(6))
+
+#define PPP_SRC_C0G_6BITS BIT(1)
+#define PPP_SRC_C1B_6BITS BIT(3)
+#define PPP_SRC_C2R_6BITS BIT(5)
+
+#define PPP_SRC_C0G_5BITS BIT(0)
+#define PPP_SRC_C1B_5BITS BIT(2)
+#define PPP_SRC_C2R_5BITS BIT(4)
+
+#define PPP_SRC_C3_ALPHA_EN BIT(8)
+
+#define PPP_SRC_BPP_INTERLVD_1BYTES 0
+#define PPP_SRC_BPP_INTERLVD_2BYTES BIT(9)
+#define PPP_SRC_BPP_INTERLVD_3BYTES BIT(10)
+#define PPP_SRC_BPP_INTERLVD_4BYTES (BIT(10)|BIT(9))
+
+#define PPP_SRC_BPP_ROI_ODD_X BIT(11)
+#define PPP_SRC_BPP_ROI_ODD_Y BIT(12)
+#define PPP_SRC_INTERLVD_2COMPONENTS BIT(13)
+#define PPP_SRC_INTERLVD_3COMPONENTS BIT(14)
+#define PPP_SRC_INTERLVD_4COMPONENTS (BIT(14)|BIT(13))
+
+/*
+ * RGB666 unpack format
+ * TIGHT means R6+G6+B6 together
+ * LOOSE means R6+2 +G6+2+ B6+2 (with MSB)
+ * or 2+R6 +2+G6 +2+B6 (with LSB)
+ */
+#define PPP_SRC_UNPACK_TIGHT BIT(17)
+#define PPP_SRC_UNPACK_LOOSE 0
+#define PPP_SRC_UNPACK_ALIGN_LSB 0
+#define PPP_SRC_UNPACK_ALIGN_MSB BIT(18)
+
+#define PPP_SRC_FETCH_PLANES_INTERLVD 0
+#define PPP_SRC_FETCH_PLANES_PSEUDOPLNR BIT(20)
+
+#define PPP_SRC_WMV9_MODE BIT(21)	/* window media version 9 */
+
+/*
+ * 0x10138 PPP operation config
+ */
+#define PPP_OP_SCALE_X_ON BIT(0)
+#define PPP_OP_SCALE_Y_ON BIT(1)
+
+#define PPP_OP_CONVERT_RGB2YCBCR 0
+#define PPP_OP_CONVERT_YCBCR2RGB BIT(2)
+#define PPP_OP_CONVERT_ON BIT(3)
+
+#define PPP_OP_CONVERT_MATRIX_PRIMARY 0
+#define PPP_OP_CONVERT_MATRIX_SECONDARY BIT(4)
+
+#define PPP_OP_LUT_C0_ON BIT(5)
+#define PPP_OP_LUT_C1_ON BIT(6)
+#define PPP_OP_LUT_C2_ON BIT(7)
+
+/* rotate or blend enable */
+#define PPP_OP_ROT_ON BIT(8)
+
+#define PPP_OP_ROT_90 BIT(9)
+#define PPP_OP_FLIP_LR BIT(10)
+#define PPP_OP_FLIP_UD BIT(11)
+
+#define PPP_OP_BLEND_ON BIT(12)
+
+#define PPP_OP_BLEND_SRCPIXEL_ALPHA 0
+#define PPP_OP_BLEND_DSTPIXEL_ALPHA BIT(13)
+#define PPP_OP_BLEND_CONSTANT_ALPHA BIT(14)
+#define PPP_OP_BLEND_SRCPIXEL_TRANSP (BIT(13)|BIT(14))
+
+#define PPP_OP_BLEND_ALPHA_BLEND_NORMAL 0
+#define PPP_OP_BLEND_ALPHA_BLEND_REVERSE BIT(15)
+
+#define PPP_OP_DITHER_EN BIT(16)
+
+#define PPP_OP_COLOR_SPACE_RGB 0
+#define PPP_OP_COLOR_SPACE_YCBCR BIT(17)
+
+#define PPP_OP_SRC_CHROMA_RGB 0
+#define PPP_OP_SRC_CHROMA_H2V1 BIT(18)
+#define PPP_OP_SRC_CHROMA_H1V2 BIT(19)
+#define PPP_OP_SRC_CHROMA_420 (BIT(18)|BIT(19))
+#define PPP_OP_SRC_CHROMA_COSITE 0
+#define PPP_OP_SRC_CHROMA_OFFSITE BIT(20)
+
+#define PPP_OP_DST_CHROMA_RGB 0
+#define PPP_OP_DST_CHROMA_H2V1 BIT(21)
+#define PPP_OP_DST_CHROMA_H1V2 BIT(22)
+#define PPP_OP_DST_CHROMA_420 (BIT(21)|BIT(22))
+#define PPP_OP_DST_CHROMA_COSITE 0
+#define PPP_OP_DST_CHROMA_OFFSITE BIT(23)
+
+#define PPP_BLEND_CALPHA_TRNASP BIT(24)
+
+#define PPP_OP_BG_CHROMA_RGB 0
+#define PPP_OP_BG_CHROMA_H2V1 BIT(25)
+#define PPP_OP_BG_CHROMA_H1V2 BIT(26)
+#define PPP_OP_BG_CHROMA_420 BIT(25)|BIT(26)
+#define PPP_OP_BG_CHROMA_SITE_COSITE 0
+#define PPP_OP_BG_CHROMA_SITE_OFFSITE BIT(27)
+#define PPP_OP_DEINT_EN BIT(29)
+
+#define PPP_BLEND_BG_USE_ALPHA_SEL      (1 << 0)
+#define PPP_BLEND_BG_ALPHA_REVERSE      (1 << 3)
+#define PPP_BLEND_BG_SRCPIXEL_ALPHA     (0 << 1)
+#define PPP_BLEND_BG_DSTPIXEL_ALPHA     (1 << 1)
+#define PPP_BLEND_BG_CONSTANT_ALPHA     (2 << 1)
+#define PPP_BLEND_BG_CONST_ALPHA_VAL(x) ((x) << 24)
+
+#define PPP_OP_DST_RGB 0
+#define PPP_OP_DST_YCBCR BIT(30)
+/*
+ * 0x10150 PPP destination config
+ */
+#define PPP_DST_C0G_8BIT (BIT(0)|BIT(1))
+#define PPP_DST_C1B_8BIT (BIT(3)|BIT(2))
+#define PPP_DST_C2R_8BIT (BIT(5)|BIT(4))
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+
+#define PPP_DST_C0G_6BIT BIT(1)
+#define PPP_DST_C1B_6BIT BIT(3)
+#define PPP_DST_C2R_6BIT BIT(5)
+
+#define PPP_DST_C0G_5BIT BIT(0)
+#define PPP_DST_C1B_5BIT BIT(2)
+#define PPP_DST_C2R_5BIT BIT(4)
+
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+#define PPP_DST_C3ALPHA_EN BIT(8)
+
+#define PPP_DST_PACKET_CNT_INTERLVD_2ELEM BIT(9)
+#define PPP_DST_PACKET_CNT_INTERLVD_3ELEM BIT(10)
+#define PPP_DST_PACKET_CNT_INTERLVD_4ELEM (BIT(10)|BIT(9))
+#define PPP_DST_PACKET_CNT_INTERLVD_6ELEM (BIT(11)|BIT(9))
+
+#define PPP_DST_PACK_LOOSE 0
+#define PPP_DST_PACK_TIGHT BIT(13)
+#define PPP_DST_PACK_ALIGN_LSB 0
+#define PPP_DST_PACK_ALIGN_MSB BIT(14)
+
+#define PPP_DST_OUT_SEL_AXI 0
+#define PPP_DST_OUT_SEL_MDDI BIT(15)
+
+#define PPP_DST_BPP_2BYTES BIT(16)
+#define PPP_DST_BPP_3BYTES BIT(17)
+#define PPP_DST_BPP_4BYTES (BIT(17)|BIT(16))
+
+#define PPP_DST_PLANE_INTERLVD 0
+#define PPP_DST_PLANE_PLANAR BIT(18)
+#define PPP_DST_PLANE_PSEUDOPLN BIT(19)
+
+#define PPP_DST_TO_TV BIT(20)
+
+#define PPP_DST_MDDI_PRIMARY 0
+#define PPP_DST_MDDI_SECONDARY BIT(21)
+#define PPP_DST_MDDI_EXTERNAL BIT(22)
+
+/*
+ * 0x10180 DMA config
+ */
+#define DMA_DSTC0G_8BITS (BIT(1)|BIT(0))
+#define DMA_DSTC1B_8BITS (BIT(3)|BIT(2))
+#define DMA_DSTC2R_8BITS (BIT(5)|BIT(4))
+
+#define DMA_DSTC0G_6BITS BIT(1)
+#define DMA_DSTC1B_6BITS BIT(3)
+#define DMA_DSTC2R_6BITS BIT(5)
+
+#define DMA_DSTC0G_5BITS BIT(0)
+#define DMA_DSTC1B_5BITS BIT(2)
+#define DMA_DSTC2R_5BITS BIT(4)
+
+#define DMA_PACK_TIGHT                      BIT(6)
+#define DMA_PACK_LOOSE                      0
+#define DMA_PACK_ALIGN_LSB                  0
+/*
+ * use DMA_PACK_ALIGN_MSB if the upper 6 bits from 8 bits output
+ * from LCDC block maps into 6 pins out to the panel
+ */
+#define DMA_PACK_ALIGN_MSB                  BIT(7)
+#define DMA_PACK_PATTERN_RGB \
+       (MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 2)<<8)
+#define DMA_PACK_PATTERN_BGR \
+       (MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 2)<<8)
+#define DMA_OUT_SEL_AHB                     0
+#define DMA_OUT_SEL_LCDC                    BIT(20)
+#define DMA_IBUF_FORMAT_RGB888              0
+#define DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888  BIT(26)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define DMA_OUT_SEL_MDDI BIT(14)
+#define DMA_AHBM_LCD_SEL_PRIMARY 0
+#define DMA_AHBM_LCD_SEL_SECONDARY BIT(15)
+#define DMA_IBUF_C3ALPHA_EN BIT(16)
+#define DMA_DITHER_EN BIT(17)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY 0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY BIT(18)
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL BIT(19)
+#define DMA_IBUF_FORMAT_RGB565 BIT(20)
+#define DMA_IBUF_FORMAT_RGB888_OR_ARGB8888 0
+#define DMA_IBUF_NONCONTIGUOUS BIT(21)
+#else
+#define DMA_OUT_SEL_MDDI                    BIT(19)
+#define DMA_AHBM_LCD_SEL_PRIMARY            0
+#define DMA_AHBM_LCD_SEL_SECONDARY          0
+#define DMA_IBUF_C3ALPHA_EN                 0
+#define DMA_DITHER_EN                       BIT(24)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY     0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY   0
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL    0
+#define DMA_IBUF_FORMAT_RGB565              BIT(25)
+#define DMA_IBUF_NONCONTIGUOUS 0
+#endif
+
+/*
+ * MDDI Register
+ */
+#define MDDI_VDO_PACKET_DESC  0x5666
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_INTR_ENABLE		(msm_mdp_base + 0x0050)
+#define MDP_INTR_STATUS		(msm_mdp_base + 0x0054)
+#define MDP_INTR_CLEAR		(msm_mdp_base + 0x0058)
+#define MDP_EBI2_LCD0		(msm_mdp_base + 0x0060)
+#define MDP_EBI2_LCD1		(msm_mdp_base + 0x0064)
+#define MDP_EBI2_PORTMAP_MODE	(msm_mdp_base + 0x0070)
+
+#define MDP_DMA_P_HIST_INTR_STATUS 	(msm_mdp_base + 0x95014)
+#define MDP_DMA_P_HIST_INTR_CLEAR 	(msm_mdp_base + 0x95018)
+#define MDP_DMA_P_HIST_INTR_ENABLE 	(msm_mdp_base + 0x9501C)
+#else
+#define MDP_INTR_ENABLE		(msm_mdp_base + 0x0020)
+#define MDP_INTR_STATUS		(msm_mdp_base + 0x0024)
+#define MDP_INTR_CLEAR		(msm_mdp_base + 0x0028)
+#define MDP_EBI2_LCD0		(msm_mdp_base + 0x003c)
+#define MDP_EBI2_LCD1		(msm_mdp_base + 0x0040)
+#define MDP_EBI2_PORTMAP_MODE	(msm_mdp_base + 0x005c)
+#endif
+
+#define MDP_FULL_BYPASS_WORD43  (msm_mdp_base + 0x101ac)
+
+#define MDP_CSC_PFMVn(n)	(msm_mdp_base + 0x40400 + 4 * (n))
+#define MDP_CSC_PRMVn(n)	(msm_mdp_base + 0x40440 + 4 * (n))
+#define MDP_CSC_PRE_BV1n(n)	(msm_mdp_base + 0x40500 + 4 * (n))
+#define MDP_CSC_PRE_BV2n(n)	(msm_mdp_base + 0x40540 + 4 * (n))
+#define MDP_CSC_POST_BV1n(n)	(msm_mdp_base + 0x40580 + 4 * (n))
+#define MDP_CSC_POST_BV2n(n)	(msm_mdp_base + 0x405c0 + 4 * (n))
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_CSC_PRE_LV1n(n)	(msm_mdp_base + 0x40600 + 4 * (n))
+#define MDP_CSC_PRE_LV2n(n)	(msm_mdp_base + 0x40640 + 4 * (n))
+#define MDP_CSC_POST_LV1n(n)	(msm_mdp_base + 0x40680 + 4 * (n))
+#define MDP_CSC_POST_LV2n(n)	(msm_mdp_base + 0x406c0 + 4 * (n))
+#define MDP_PPP_SCALE_COEFF_LSBn(n)	(msm_mdp_base + 0x50400 + 8 * (n))
+#define MDP_PPP_SCALE_COEFF_MSBn(n)	(msm_mdp_base + 0x50404 + 8 * (n))
+
+#define SCALE_D0_SET  0
+#define SCALE_D1_SET  BIT(0)
+#define SCALE_D2_SET  BIT(1)
+#define SCALE_U1_SET  (BIT(0)|BIT(1))
+
+#else
+#define MDP_CSC_PRE_LV1n(n)	(msm_mdp_base + 0x40580 + 4 * (n))
+#endif
+
+#define MDP_CURSOR_WIDTH 64
+#define MDP_CURSOR_HEIGHT 64
+#define MDP_CURSOR_SIZE (MDP_CURSOR_WIDTH*MDP_CURSOR_WIDTH*4)
+
+#define MDP_DMA_P_LUT_C0_EN   BIT(0)
+#define MDP_DMA_P_LUT_C1_EN   BIT(1)
+#define MDP_DMA_P_LUT_C2_EN   BIT(2)
+#define MDP_DMA_P_LUT_POST    BIT(4)
+
+void mdp_hw_init(void);
+int mdp_ppp_pipe_wait(void);
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr);
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+			  boolean sync);
+void mdp_dma_pan_update(struct fb_info *info);
+void mdp_refresh_screen(unsigned long data);
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+		struct file **pp_src, struct file **pp_dest);
+void mdp_lcd_update_workqueue_handler(struct work_struct *work);
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work);
+void mdp_dma2_update(struct msm_fb_data_type *mfd);
+void mdp_config_vsync(struct msm_fb_data_type *);
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd);
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht);
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr);
+void mdp_init_scale_table(void);
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer);
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr);
+
+int mdp_dma3_on(struct platform_device *pdev);
+int mdp_dma3_off(struct platform_device *pdev);
+void mdp_dma3_update(struct msm_fb_data_type *mfd);
+
+int mdp_lcdc_on(struct platform_device *pdev);
+int mdp_lcdc_off(struct platform_device *pdev);
+void mdp_lcdc_update(struct msm_fb_data_type *mfd);
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor);
+void mdp_enable_irq(uint32 term);
+void mdp_disable_irq(uint32 term);
+void mdp_disable_irq_nolock(uint32 term);
+uint32_t mdp_get_bytes_per_pixel(uint32_t format);
+
+#ifdef MDP_HW_VSYNC
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd);
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd);
+#endif
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd);
+
+/* Added to support flipping */
+void mdp_set_offset_info(struct fb_info *info, uint32 address, uint32 interval);
+
+int get_gem_img(struct mdp_img *img, unsigned long *start,
+		unsigned long *len);
+int get_img(struct mdp_img *img, struct fb_info *info,
+		unsigned long *start, unsigned long *len,
+		struct file **pp_file);
+
+
+/*int get_img(struct msmfb_data *img, struct fb_info *info,
+	unsigned long *start, unsigned long *len, struct file **pp_file);*/
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4.h b/drivers/staging/msm/mdp4.h
new file mode 100644
index 00000000000..26ec8f12cf6
--- /dev/null
+++ b/drivers/staging/msm/mdp4.h
@@ -0,0 +1,352 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP4_H
+#define MDP4_H
+
+extern struct mdp_dma_data dma2_data;
+extern struct mdp_dma_data dma_s_data;
+extern struct mdp_dma_data dma_e_data;
+extern struct mdp_histogram mdp_hist;
+extern struct completion mdp_hist_comp;
+extern boolean mdp_is_in_isr;
+extern uint32 mdp_intr_mask;
+extern spinlock_t mdp_spin_lock;
+
+
+#define MDP4_NONBLOCKING	/* enable non blocking ioctl */
+
+#define MDP4_OVERLAYPROC0_BASE	0x10000
+#define MDP4_OVERLAYPROC1_BASE	0x18000
+
+#define MDP4_VIDEO_BASE 0x20000
+#define MDP4_VIDEO_OFF 0x10000
+
+#define MDP4_RGB_BASE 0x40000
+#define MDP4_RGB_OFF 0x10000
+
+enum {		/* display */
+	PRIMARY_INTF_SEL,
+	SECONDARY_INTF_SEL,
+	EXTERNAL_INTF_SEL
+};
+
+enum {
+	LCDC_RGB_INTF,
+	DTV_INTF = LCDC_RGB_INTF,
+	MDDI_LCDC_INTF,
+	MDDI_INTF,
+	EBI2_INTF
+};
+
+enum {
+	MDDI_PRIMARY_SET,
+	MDDI_SECONDARY_SET,
+	MDDI_EXTERNAL_SET
+};
+
+enum {
+	EBI2_LCD0,
+	EBI2_LCD1
+};
+
+enum {
+	OVERLAY_MODE_NONE,
+	OVERLAY_MODE_BLT
+};
+
+enum {
+	OVERLAY_REFRESH_ON_DEMAND,
+	OVERLAY_REFRESH_VSYNC,
+	OVERLAY_REFRESH_VSYNC_HALF,
+	OVERLAY_REFRESH_VSYNC_QUARTER
+};
+
+enum {
+	OVERLAY_FRAMEBUF,
+	OVERLAY_DIRECTOUT
+};
+
+/* system interrupts */
+#define INTR_OVERLAY0_DONE		BIT(0)
+#define INTR_OVERLAY1_DONE		BIT(1)
+#define INTR_DMA_S_DONE			BIT(2)
+#define INTR_DMA_E_DONE			BIT(3)
+#define INTR_DMA_P_DONE			BIT(4)
+#define INTR_VG1_HISTOGRAM		BIT(5)
+#define INTR_VG2_HISTOGRAM		BIT(6)
+#define INTR_PRIMARY_VSYNC		BIT(7)
+#define INTR_PRIMARY_INTF_UDERRUN	BIT(8)
+#define INTR_EXTERNAL_VSYNC		BIT(9)
+#define INTR_EXTERNAL_INTF_UDERRUN	BIT(10)
+#define INTR_DMA_P_HISTOGRAM		BIT(17)
+
+/* histogram interrupts */
+#define INTR_HIST_DONE			BIT(0)
+#define INTR_HIST_RESET_SEQ_DONE	BIT(1)
+
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+#define MDP4_ANY_INTR_MASK	(INTR_OVERLAY0_DONE)
+#else
+#define MDP4_ANY_INTR_MASK	(INTR_DMA_P_DONE)
+#endif
+
+enum {
+	OVERLAY_PIPE_RGB1,
+	OVERLAY_PIPE_RGB2,
+};
+
+enum {
+	OVERLAY_PIPE_VG1,	/* video/graphic */
+	OVERLAY_PIPE_VG2
+};
+
+enum {
+	OVERLAY_TYPE_RGB,
+	OVERLAY_TYPE_VG		/* video/graphic */
+};
+
+enum {
+	MDP4_MIXER0,
+	MDP4_MIXER1
+};
+
+#define MDP4_MAX_MIXER	2
+
+enum {
+	OVERLAY_PLANE_INTERLEAVED,
+	OVERLAY_PLANE_PLANAR,
+	OVERLAY_PLANE_PSEUDO_PLANAR
+};
+
+enum {
+	MDP4_MIXER_STAGE_UNUNSED,	/* pipe not used */
+	MDP4_MIXER_STAGE_BASE,
+	MDP4_MIXER_STAGE0,	/* zorder 0 */
+	MDP4_MIXER_STAGE1,	/* zorder 1 */
+	MDP4_MIXER_STAGE2	/* zorder 2 */
+};
+
+#define MDP4_MAX_STAGE	4
+
+enum {
+	MDP4_FRAME_FORMAT_LINEAR,
+	MDP4_FRAME_FORMAT_ARGB_TILE,
+	MDP4_FRAME_FORMAT_VIDEO_SUPERTILE
+};
+
+enum {
+	MDP4_CHROMA_RGB,
+	MDP4_CHROMA_H2V1,
+	MDP4_CHROMA_H1V2,
+	MDP4_CHROMA_420
+};
+
+#define MDP4_BLEND_BG_TRANSP_EN		BIT(9)
+#define MDP4_BLEND_FG_TRANSP_EN		BIT(8)
+#define MDP4_BLEND_BG_MOD_ALPHA		BIT(7)
+#define MDP4_BLEND_BG_INV_ALPHA		BIT(6)
+#define MDP4_BLEND_BG_ALPHA_FG_CONST	(0 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_CONST	(1 << 4)
+#define MDP4_BLEND_BG_ALPHA_FG_PIXEL	(2 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_PIXEL	(3 << 4)
+#define MDP4_BLEND_FG_MOD_ALPHA		BIT(3)
+#define MDP4_BLEND_FG_INV_ALPHA		BIT(2)
+#define MDP4_BLEND_FG_ALPHA_FG_CONST	(0 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_CONST	(1 << 0)
+#define MDP4_BLEND_FG_ALPHA_FG_PIXEL	(2 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_PIXEL	(3 << 0)
+
+#define MDP4_FORMAT_SOLID_FILL		BIT(22)
+#define MDP4_FORMAT_UNPACK_ALIGN_MSB	BIT(18)
+#define MDP4_FORMAT_UNPACK_TIGHT	BIT(17)
+#define MDP4_FORMAT_90_ROTATED		BIT(12)
+#define MDP4_FORMAT_ALPHA_ENABLE	BIT(8)
+
+#define MDP4_OP_DEINT_ODD_REF  	BIT(19)
+#define MDP4_OP_IGC_LUT_EN	BIT(16)
+#define MDP4_OP_DITHER_EN     	BIT(15)
+#define MDP4_OP_FLIP_UD		BIT(14)
+#define MDP4_OP_FLIP_LR		BIT(13)
+#define MDP4_OP_CSC_EN		BIT(11)
+#define MDP4_OP_SRC_DATA_YCBCR	BIT(9)
+#define MDP4_OP_SCALEY_FIR 		(0 << 4)
+#define MDP4_OP_SCALEY_MN_PHASE 	(1 << 4)
+#define MDP4_OP_SCALEY_PIXEL_RPT	(2 << 4)
+#define MDP4_OP_SCALEX_FIR 		(0 << 2)
+#define MDP4_OP_SCALEX_MN_PHASE 	(1 << 2)
+#define MDP4_OP_SCALEX_PIXEL_RPT 	(2 << 2)
+#define MDP4_OP_SCALEY_EN	BIT(1)
+#define MDP4_OP_SCALEX_EN	BIT(0)
+
+#define MDP4_PIPE_PER_MIXER	2
+
+#define MDP4_MAX_PLANE		4
+
+#define MDP4_MAX_VIDEO_PIPE 2
+#define MDP4_MAX_RGB_PIPE 2
+#define MDP4_MAX_OVERLAY_PIPE 	16
+
+
+struct mdp4_overlay_pipe {
+	uint32 pipe_type;		/* rgb, video/graphic */
+	uint32 pipe_num;
+	uint32 pipe_ndx;
+	uint32 mixer_num;		/* which mixer used */
+	uint32 mixer_stage;		/* which stage of mixer used */
+	uint32 src_format;
+	uint32 src_width;	/* source img width */
+	uint32 src_height;	/* source img height */
+	uint32 src_w;		/* roi */
+	uint32 src_h;		/* roi */
+	uint32 src_x;		/* roi */
+	uint32 src_y;		/* roi */
+	uint32 dst_w;		/* roi */
+	uint32 dst_h;		/* roi */
+	uint32 dst_x;		/* roi */
+	uint32 dst_y;		/* roi */
+	uint32 op_mode;
+	uint32 transp;
+	uint32 blend_op;
+	uint32 phasex_step;
+	uint32 phasey_step;
+	uint32 alpha;
+	uint32 is_fg;		/* control alpha & color key */
+	uint32 srcp0_addr;	/* interleave, luma */
+	uint32 srcp0_ystride;
+	uint32 srcp1_addr;	/* pseudoplanar, chroma plane */
+	uint32 srcp1_ystride;
+	uint32 srcp2_addr;	/* planar color 2*/
+	uint32 srcp2_ystride;
+	uint32 srcp3_addr;	/* alpha/color 3 */
+	uint32 srcp3_ystride;
+	uint32 fetch_plane;
+	uint32 frame_format;		/* video */
+	uint32 chroma_site;		/* video */
+	uint32 chroma_sample;		/* video */
+	uint32 solid_fill;
+	uint32 vc1_reduce;		/* video */
+	uint32 fatch_planes;		/* video */
+	uint32 unpack_align_msb;/* 0 to LSB, 1 to MSB */
+	uint32 unpack_tight;/* 0 for loose, 1 for tight */
+	uint32 unpack_count;/* 0 = 1 component, 1 = 2 component ... */
+	uint32 rotated_90; /* has been rotated 90 degree */
+	uint32 bpp;	/* byte per pixel */
+	uint32 alpha_enable;/*  source has alpha */
+	/*
+	 * number of bits for source component,
+	 * 0 = 1 bit, 1 = 2 bits, 2 = 6 bits, 3 = 8 bits
+	 */
+	uint32 a_bit;	/* component 3, alpha */
+	uint32 r_bit;	/* component 2, R_Cr */
+	uint32 b_bit;	/* component 1, B_Cb */
+	uint32 g_bit;	/* component 0, G_lumz */
+	/*
+	 * unpack pattern
+	 * A = C3, R = C2, B = C1, G = C0
+	 */
+	uint32 element3; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element2; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element1; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element0; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	struct completion comp;
+	struct mdp_overlay req_data;
+};
+
+void mdp4_sw_reset(unsigned long bits);
+void mdp4_display_intf_sel(int output, unsigned long intf);
+void mdp4_overlay_cfg(int layer, int blt_mode, int refresh, int direct_out);
+void mdp4_ebi2_lcd_setup(int lcd, unsigned long base, int ystride);
+void mdp4_mddi_setup(int which, unsigned long id);
+unsigned long mdp4_display_status(void);
+void mdp4_enable_clk_irq(void);
+void mdp4_disable_clk_irq(void);
+void mdp4_dma_p_update(struct msm_fb_data_type *mfd);
+void mdp4_dma_s_update(struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr);
+void mdp4_pipe_kickoff(uint32 pipe, struct msm_fb_data_type *mfd);
+int mdp4_lcdc_on(struct platform_device *pdev);
+int mdp4_lcdc_off(struct platform_device *pdev);
+void mdp4_lcdc_update(struct msm_fb_data_type *mfd);
+void mdp4_intr_clear_set(ulong clear, ulong set);
+void mdp4_dma_p_cfg(void);
+void mdp4_hw_init(void);
+void mdp4_isr_read(int);
+void mdp4_clear_lcdc(void);
+void mdp4_mixer_blend_init(int mixer_num);
+void mdp4_vg_qseed_init(int vg_num);
+void mdp4_vg_csc_mv_setup(int vp_num);
+void mdp4_vg_csc_pre_bv_setup(int vp_num);
+void mdp4_vg_csc_post_bv_setup(int vp_num);
+void mdp4_vg_csc_pre_lv_setup(int vp_num);
+void mdp4_vg_csc_post_lv_setup(int vp_num);
+irqreturn_t mdp4_isr(int irq, void *ptr);
+void mdp4_overlay_format_to_pipe(uint32 format, struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_op_mode(struct mdp4_overlay_pipe *pipe);
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd);
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all);
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe);
+int mdp4_mixer_stage_can_run(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe);
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd);
+int mdp4_overlay_format2type(uint32 format);
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_unset(struct fb_info *info, int ndx);
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+				struct file **pp_src_file);
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void);
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc);
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_active(int mixer);
+void mdp4_overlay0_done_lcdc(void);
+void mdp4_overlay0_done_mddi(void);
+void mdp4_mddi_overlay_restore(void);
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+				struct mdp4_overlay_pipe *pipe);
+void mdp4_rgb_igc_lut_setup(int num);
+void mdp4_vg_igc_lut_setup(int num);
+void mdp4_mixer_gc_lut_setup(int mixer_num);
+
+#ifdef CONFIG_DEBUG_FS
+int mdp4_debugfs_init(void);
+#endif
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file);
+
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4_debugfs.c b/drivers/staging/msm/mdp4_debugfs.c
new file mode 100644
index 00000000000..844d46775ec
--- /dev/null
+++ b/drivers/staging/msm/mdp4_debugfs.c
@@ -0,0 +1,181 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+#define MDP4_DEBUG_BUF	128
+
+
+static char mdp4_debug_buf[MDP4_DEBUG_BUF];
+static ulong mdp4_debug_offset;
+static ulong mdp4_base_addr;
+
+static int mdp4_offset_set(void *data, u64 val)
+{
+	mdp4_debug_offset = (int)val;
+	return 0;
+}
+
+static int mdp4_offset_get(void *data, u64 *val)
+{
+	*val = (u64)mdp4_debug_offset;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(
+			mdp4_offset_fops,
+			mdp4_offset_get,
+			mdp4_offset_set,
+			"%llx\n");
+
+
+static int mdp4_debugfs_open(struct inode *inode, struct file *file)
+{
+	/* non-seekable */
+	file->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE);
+	return 0;
+}
+
+static int mdp4_debugfs_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static ssize_t mdp4_debugfs_write(
+	struct file *file,
+	const char __user *buff,
+	size_t count,
+	loff_t *ppos)
+{
+	int cnt;
+	unsigned int data;
+
+	printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+		__func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+	if (count > sizeof(mdp4_debug_buf))
+		return -EFAULT;
+
+	if (copy_from_user(mdp4_debug_buf, buff, count))
+		return -EFAULT;
+
+
+	mdp4_debug_buf[count] = 0;	/* end of string */
+
+	cnt = sscanf(mdp4_debug_buf, "%x", &data);
+	if (cnt < 1) {
+		printk(KERN_ERR "%s: sscanf failed cnt=%d" , __func__, cnt);
+		return -EINVAL;
+	}
+
+	writel(&data, mdp4_base_addr + mdp4_debug_offset);
+
+	return 0;
+}
+
+static ssize_t mdp4_debugfs_read(
+	struct file *file,
+	char __user *buff,
+	size_t count,
+	loff_t *ppos)
+{
+	int len = 0;
+	unsigned int data;
+
+	printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+		__func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+	if (*ppos)
+		return 0;	/* the end */
+
+	data = readl(mdp4_base_addr + mdp4_debug_offset);
+
+	len = snprintf(mdp4_debug_buf, 4, "%x\n", data);
+
+	if (len > 0) {
+		if (len > count)
+			len = count;
+		if (copy_to_user(buff, mdp4_debug_buf, len))
+			return -EFAULT;
+	}
+
+	printk(KERN_INFO "%s: len=%d\n", __func__, len);
+
+	if (len < 0)
+		return 0;
+
+	*ppos += len;	/* increase offset */
+
+	return len;
+}
+
+static const struct file_operations mdp4_debugfs_fops = {
+	.open = mdp4_debugfs_open,
+	.release = mdp4_debugfs_release,
+	.read = mdp4_debugfs_read,
+	.write = mdp4_debugfs_write,
+};
+
+int mdp4_debugfs_init(void)
+{
+	struct dentry *dent = debugfs_create_dir("mdp4", NULL);
+
+	if (IS_ERR(dent)) {
+		printk(KERN_ERR "%s(%d): debugfs_create_dir fail, error %ld\n",
+			__FILE__, __LINE__, PTR_ERR(dent));
+		return -1;
+	}
+
+	if (debugfs_create_file("offset", 0644, dent, 0, &mdp4_offset_fops)
+			== NULL) {
+		printk(KERN_ERR "%s(%d): debugfs_create_file: offset fail\n",
+			__FILE__, __LINE__);
+		return -1;
+	}
+
+	if (debugfs_create_file("regs", 0644, dent, 0, &mdp4_debugfs_fops)
+			== NULL) {
+		printk(KERN_ERR "%s(%d): debugfs_create_file: regs fail\n",
+			__FILE__, __LINE__);
+		return -1;
+	}
+
+	mdp4_debug_offset = 0;
+	mdp4_base_addr = (ulong) msm_mdp_base;	/* defined at msm_fb_def.h */
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
new file mode 100644
index 00000000000..304bb829763
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -0,0 +1,1259 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include "android_pmem.h"
+#include <linux/major.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/mutex.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+struct mdp4_overlay_ctrl {
+	struct mdp4_overlay_pipe plist[MDP4_MAX_OVERLAY_PIPE];
+	struct mdp4_overlay_pipe *stage[MDP4_MAX_MIXER][MDP4_MAX_STAGE];
+} mdp4_overlay_db;
+
+static struct mdp4_overlay_ctrl *ctrl = &mdp4_overlay_db;
+
+
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc)
+{
+	uint32	dma2_cfg_reg;
+
+	dma2_cfg_reg = DMA_DITHER_EN;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+
+	if (mfd->panel_info.bpp == 18) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else if (mfd->panel_info.bpp == 16) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	} else {
+		dma2_cfg_reg |= DMA_DSTC0G_8BITS |	/* 888 16BPP */
+		    DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+	}
+
+	if (lcdc)
+		dma2_cfg_reg |= DMA_PACK_ALIGN_MSB;
+
+	/* dma2 config register */
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+}
+
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe)
+{
+
+	/* dma_p source */
+	MDP_OUTP(MDP_BASE + 0x90004,
+			(pipe->src_height << 16 | pipe->src_width));
+	MDP_OUTP(MDP_BASE + 0x90008, pipe->srcp0_addr);
+	MDP_OUTP(MDP_BASE + 0x9000c, pipe->srcp0_ystride);
+
+	/* dma_p dest */
+	MDP_OUTP(MDP_BASE + 0x90010, (pipe->dst_y << 16 | pipe->dst_x));
+}
+
+#define MDP4_VG_PHASE_STEP_DEFAULT	0x20000000
+#define MDP4_VG_PHASE_STEP_SHIFT	29
+
+static int mdp4_leading_0(uint32 num)
+{
+	uint32 bit = 0x80000000;
+	int i;
+
+	for (i = 0; i < 32; i++) {
+		if (bit & num)
+			return i;
+		bit >>= 1;
+	}
+
+	return i;
+}
+
+static uint32 mdp4_scale_phase_step(int f_num, uint32 src, uint32 dst)
+{
+	uint32 val;
+	int	n;
+
+	n = mdp4_leading_0(src);
+	if (n > f_num)
+		n = f_num;
+	val = src << n;	/* maximum to reduce lose of resolution */
+	val /= dst;
+	if (n < f_num) {
+		n = f_num - n;
+		val <<= n;
+	}
+
+	return val;
+}
+
+static void mdp4_scale_setup(struct mdp4_overlay_pipe *pipe)
+{
+
+	pipe->phasex_step = MDP4_VG_PHASE_STEP_DEFAULT;
+	pipe->phasey_step = MDP4_VG_PHASE_STEP_DEFAULT;
+
+	if (pipe->dst_h && pipe->src_h != pipe->dst_h) {
+		if (pipe->dst_h >= pipe->src_h * 8)	/* too much */
+			return;
+		pipe->op_mode |= MDP4_OP_SCALEY_EN;
+
+		if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+			if (pipe->dst_h <= (pipe->src_h / 4))
+				pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+			else
+				pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+		}
+
+		pipe->phasey_step = mdp4_scale_phase_step(29,
+					pipe->src_h, pipe->dst_h);
+	}
+
+	if (pipe->dst_w && pipe->src_w != pipe->dst_w) {
+		if (pipe->dst_w >= pipe->src_w * 8)	/* too much */
+			return;
+		pipe->op_mode |= MDP4_OP_SCALEX_EN;
+
+		if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+			if (pipe->dst_w <= (pipe->src_w / 4))
+				pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+			else
+				pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+		}
+
+		pipe->phasex_step = mdp4_scale_phase_step(29,
+					pipe->src_w, pipe->dst_w);
+	}
+}
+
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe)
+{
+	char *rgb_base;
+	uint32 src_size, src_xy, dst_size, dst_xy;
+	uint32 format, pattern;
+
+	rgb_base = MDP_BASE + MDP4_RGB_BASE;
+	rgb_base += (MDP4_RGB_OFF * pipe->pipe_num);
+
+	src_size = ((pipe->src_h << 16) | pipe->src_w);
+	src_xy = ((pipe->src_y << 16) | pipe->src_x);
+	dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+	dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+	format = mdp4_overlay_format(pipe);
+	pattern = mdp4_overlay_unpack_pattern(pipe);
+
+	pipe->op_mode |= MDP4_OP_IGC_LUT_EN;
+
+	mdp4_scale_setup(pipe);
+
+	outpdw(rgb_base + 0x0000, src_size);	/* MDP_RGB_SRC_SIZE */
+	outpdw(rgb_base + 0x0004, src_xy);	/* MDP_RGB_SRC_XY */
+	outpdw(rgb_base + 0x0008, dst_size);	/* MDP_RGB_DST_SIZE */
+	outpdw(rgb_base + 0x000c, dst_xy);	/* MDP_RGB_DST_XY */
+
+	outpdw(rgb_base + 0x0010, pipe->srcp0_addr);
+	outpdw(rgb_base + 0x0040, pipe->srcp0_ystride);
+
+	outpdw(rgb_base + 0x0050, format);/* MDP_RGB_SRC_FORMAT */
+	outpdw(rgb_base + 0x0054, pattern);/* MDP_RGB_SRC_UNPACK_PATTERN */
+	outpdw(rgb_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+	outpdw(rgb_base + 0x005c, pipe->phasex_step);
+	outpdw(rgb_base + 0x0060, pipe->phasey_step);
+
+	/* 16 bytes-burst x 3 req <= 48 bytes */
+	outpdw(rgb_base + 0x1004, 0xc2);	/* MDP_RGB_FETCH_CFG */
+}
+
+void mdp4_overlay_vg_setup(struct mdp4_overlay_pipe *pipe)
+{
+	char *vg_base;
+	uint32 frame_size, src_size, src_xy, dst_size, dst_xy;
+	uint32 format, pattern;
+
+	vg_base = MDP_BASE + MDP4_VIDEO_BASE;
+	vg_base += (MDP4_VIDEO_OFF * pipe->pipe_num);
+
+	frame_size = ((pipe->src_height << 16) | pipe->src_width);
+	src_size = ((pipe->src_h << 16) | pipe->src_w);
+	src_xy = ((pipe->src_y << 16) | pipe->src_x);
+	dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+	dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+	format = mdp4_overlay_format(pipe);
+	pattern = mdp4_overlay_unpack_pattern(pipe);
+
+	pipe->op_mode |= (MDP4_OP_CSC_EN | MDP4_OP_SRC_DATA_YCBCR |
+				MDP4_OP_IGC_LUT_EN);
+
+	mdp4_scale_setup(pipe);
+
+	outpdw(vg_base + 0x0000, src_size);	/* MDP_RGB_SRC_SIZE */
+	outpdw(vg_base + 0x0004, src_xy);	/* MDP_RGB_SRC_XY */
+	outpdw(vg_base + 0x0008, dst_size);	/* MDP_RGB_DST_SIZE */
+	outpdw(vg_base + 0x000c, dst_xy);	/* MDP_RGB_DST_XY */
+	outpdw(vg_base + 0x0048, frame_size);	/* TILE frame size */
+
+	/* luma component plane */
+	outpdw(vg_base + 0x0010, pipe->srcp0_addr);
+
+	/* chroma component plane */
+	outpdw(vg_base + 0x0014, pipe->srcp1_addr);
+
+	outpdw(vg_base + 0x0040,
+			pipe->srcp1_ystride << 16 | pipe->srcp0_ystride);
+
+	outpdw(vg_base + 0x0050, format);	/* MDP_RGB_SRC_FORMAT */
+	outpdw(vg_base + 0x0054, pattern);	/* MDP_RGB_SRC_UNPACK_PATTERN */
+	outpdw(vg_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+	outpdw(vg_base + 0x005c, pipe->phasex_step);
+	outpdw(vg_base + 0x0060, pipe->phasey_step);
+
+	if (pipe->op_mode & MDP4_OP_DITHER_EN) {
+		outpdw(vg_base + 0x0068,
+			pipe->r_bit << 4 | pipe->b_bit << 2 | pipe->g_bit);
+	}
+
+	/* 16 bytes-burst x 3 req <= 48 bytes */
+	outpdw(vg_base + 0x1004, 0xc2);	/* MDP_VG_FETCH_CFG */
+}
+
+int mdp4_overlay_format2type(uint32 format)
+{
+	switch (format) {
+	case MDP_RGB_565:
+	case MDP_RGB_888:
+	case MDP_BGR_565:
+	case MDP_ARGB_8888:
+	case MDP_RGBA_8888:
+	case MDP_BGRA_8888:
+		return OVERLAY_TYPE_RGB;
+	case MDP_YCRYCB_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CBCR_H2V2_TILE:
+	case MDP_Y_CRCB_H2V2_TILE:
+		return OVERLAY_TYPE_VG;
+	default:
+		return -ERANGE;
+	}
+
+}
+
+#define C3_ALPHA	3	/* alpha */
+#define C2_R_Cr		2	/* R/Cr */
+#define C1_B_Cb		1	/* B/Cb */
+#define C0_G_Y		0	/* G/luma */
+
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe)
+{
+	switch (pipe->src_format) {
+	case MDP_RGB_565:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 1;	/* R, 5 bits */
+		pipe->b_bit = 1;	/* B, 5 bits */
+		pipe->g_bit = 2;	/* G, 6 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_RGB_888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 3;	/* 3 bpp */
+		break;
+	case MDP_BGR_565:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 1;	/* R, 5 bits */
+		pipe->b_bit = 1;	/* B, 5 bits */
+		pipe->g_bit = 2;	/* G, 6 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C1_B_Cb;	/* B */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C2_R_Cr;	/* R */
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_ARGB_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C3_ALPHA;	/* alpha */
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_RGBA_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C2_R_Cr;	/* R */
+		pipe->element2 = C0_G_Y;	/* G */
+		pipe->element1 = C1_B_Cb;	/* B */
+		pipe->element0 = C3_ALPHA;	/* alpha */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_BGRA_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C1_B_Cb;	/* B */
+		pipe->element2 = C0_G_Y;	/* G */
+		pipe->element1 = C2_R_Cr;	/* R */
+		pipe->element0 = C3_ALPHA;	/* alpha */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_YCRYCB_H2V1:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C0_G_Y;	/* G */
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 2;		/* 2 bpp */
+		pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		break;
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 1;		/* 2 */
+		pipe->element3 = C0_G_Y;	/* not used */
+		pipe->element2 = C0_G_Y;	/* not used */
+		if (pipe->src_format == MDP_Y_CRCB_H2V1) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V1) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		} else if (pipe->src_format == MDP_Y_CRCB_H2V2) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V2) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		}
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_Y_CBCR_H2V2_TILE:
+	case MDP_Y_CRCB_H2V2_TILE:
+		pipe->frame_format = MDP4_FRAME_FORMAT_VIDEO_SUPERTILE;
+		pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 1;		/* 2 */
+		pipe->element3 = C0_G_Y;	/* not used */
+		pipe->element2 = C0_G_Y;	/* not used */
+		if (pipe->src_format == MDP_Y_CRCB_H2V2_TILE) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V2_TILE) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		}
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	default:
+		/* not likely */
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+/*
+ * color_key_convert: output with 12 bits color key
+ */
+static uint32 color_key_convert(int start, int num, uint32 color)
+{
+
+	uint32 data;
+
+	data = (color >> start) & ((1 << num) - 1);
+
+	if (num == 5)
+		data = (data << 7) + (data << 2) + (data >> 3);
+	else if (num == 6)
+		data = (data << 6) + data;
+	else	/* 8 bits */
+		data = (data << 4) + (data >> 4);
+
+	return data;
+
+}
+
+void transp_color_key(int format, uint32 transp,
+			uint32 *c0, uint32 *c1, uint32 *c2)
+{
+	int b_start, g_start, r_start;
+	int b_num, g_num, r_num;
+
+	switch (format) {
+	case MDP_RGB_565:
+		b_start = 0;
+		g_start = 5;
+		r_start = 11;
+		r_num = 5;
+		g_num = 6;
+		b_num = 5;
+		break;
+	case MDP_RGB_888:
+	case MDP_XRGB_8888:
+	case MDP_ARGB_8888:
+		b_start = 0;
+		g_start = 8;
+		r_start = 16;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	case MDP_BGR_565:
+		b_start = 11;
+		g_start = 5;
+		r_start = 0;
+		r_num = 5;
+		g_num = 6;
+		b_num = 5;
+		break;
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CBCR_H2V1:
+		b_start = 8;
+		g_start = 16;
+		r_start = 0;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CRCB_H2V1:
+		b_start = 0;
+		g_start = 16;
+		r_start = 8;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	default:
+		b_start = 0;
+		g_start = 8;
+		r_start = 16;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	}
+
+	*c0 = color_key_convert(g_start, g_num, transp);
+	*c1 = color_key_convert(b_start, b_num, transp);
+	*c2 = color_key_convert(r_start, r_num, transp);
+}
+
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe)
+{
+	uint32	format;
+
+	format = 0;
+
+	if (pipe->solid_fill)
+		format |= MDP4_FORMAT_SOLID_FILL;
+
+	if (pipe->unpack_align_msb)
+		format |= MDP4_FORMAT_UNPACK_ALIGN_MSB;
+
+	if (pipe->unpack_tight)
+		format |= MDP4_FORMAT_UNPACK_TIGHT;
+
+	if (pipe->alpha_enable)
+		format |= MDP4_FORMAT_ALPHA_ENABLE;
+
+	format |= (pipe->unpack_count << 13);
+	format |= ((pipe->bpp - 1) << 9);
+	format |= (pipe->a_bit << 6);
+	format |= (pipe->r_bit << 4);
+	format |= (pipe->b_bit << 2);
+	format |= pipe->g_bit;
+
+	format |= (pipe->frame_format << 29);
+
+	if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+		/* video/graphic */
+		format |= (pipe->fetch_plane << 19);
+		format |= (pipe->chroma_site << 28);
+		format |= (pipe->chroma_sample << 26);
+	}
+
+	return format;
+}
+
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe)
+{
+	return (pipe->element3 << 24) | (pipe->element2 << 16) |
+			(pipe->element1 << 8) | pipe->element0;
+}
+
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data;
+	char *overlay_base;
+
+	if (pipe->mixer_num == MDP4_MIXER1)
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* MDP_OVERLAYPROC_CFG */
+	outpdw(overlay_base + 0x0004, 0x01); /* directout */
+	data = pipe->src_height;
+	data <<= 16;
+	data |= pipe->src_width;
+	outpdw(overlay_base + 0x0008, data); /* ROI, height + width */
+	outpdw(overlay_base + 0x000c, pipe->srcp0_addr);
+	outpdw(overlay_base + 0x0010, pipe->srcp0_ystride);
+	outpdw(overlay_base + 0x0014, 0x4);	/* GC_LUT_EN, 888 */
+}
+
+int mdp4_overlay_active(int mixer)
+{
+	uint32 data, mask, i;
+	int p1, p2;
+
+	data = inpdw(MDP_BASE + 0x10100);
+	p1 = 0;
+	p2 = 0;
+	for (i = 0; i < 8; i++) {
+		mask = data & 0x0f;
+		if (mask) {
+			if (mask <= 4)
+				p1++;
+			else
+				p2++;
+		}
+		data >>= 4;
+	}
+
+	if (mixer)
+		return p2;
+	else
+		return p1;
+}
+
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data, mask, snum, stage, mixer;
+
+	stage = pipe->mixer_stage;
+	mixer = pipe->mixer_num;
+
+	/* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
+	data = inpdw(MDP_BASE + 0x10100);
+
+	if (mixer == MDP4_MIXER1)
+		stage += 8;
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+		snum = 0;
+		snum += (4 * pipe->pipe_num);
+	} else {
+		snum = 8;
+		snum += (4 * pipe->pipe_num);	/* RGB1 and RGB2 */
+	}
+
+	mask = 0x0f;
+	mask <<= snum;
+	stage <<= snum;
+	data &= ~mask;	/* clear old bits */
+
+	data |= stage;
+
+	outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+	data = inpdw(MDP_BASE + 0x10100);
+
+	ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = pipe;	/* keep it */
+}
+
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data, mask, snum, stage, mixer;
+
+	stage = pipe->mixer_stage;
+	mixer = pipe->mixer_num;
+
+	if (pipe != ctrl->stage[mixer][stage])	/* not runing */
+		return;
+
+	/* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
+	data = inpdw(MDP_BASE + 0x10100);
+
+	if (mixer == MDP4_MIXER1)
+		stage += 8;
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+		snum = 0;
+		snum += (4 * pipe->pipe_num);
+	} else {
+		snum = 8;
+		snum += (4 * pipe->pipe_num);	/* RGB1 and RGB2 */
+	}
+
+	mask = 0x0f;
+	mask <<= snum;
+	data &= ~mask;	/* clear old bits */
+
+	outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+	data = inpdw(MDP_BASE + 0x10100);
+
+	ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = NULL;	/* clear it */
+}
+
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe)
+{
+	unsigned char *overlay_base;
+	uint32 c0, c1, c2, blend_op;
+	int off;
+
+	if (pipe->mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* stage 0 to stage 2 */
+	off = 0x20 * (pipe->mixer_stage - MDP4_MIXER_STAGE0);
+
+	blend_op = 0;
+	if (pipe->alpha_enable) 	/* ARGB */
+		blend_op = MDP4_BLEND_FG_ALPHA_FG_PIXEL |
+				MDP4_BLEND_BG_ALPHA_FG_PIXEL;
+	else
+		blend_op = (MDP4_BLEND_BG_ALPHA_BG_CONST |
+				MDP4_BLEND_FG_ALPHA_FG_CONST);
+
+
+	if (pipe->alpha_enable == 0) { 	/* not ARGB */
+		if (pipe->is_fg) {
+			outpdw(overlay_base + off + 0x108, pipe->alpha);
+			outpdw(overlay_base + off + 0x10c, 0xff - pipe->alpha);
+		} else {
+			outpdw(overlay_base + off + 0x108, 0xff - pipe->alpha);
+			outpdw(overlay_base + off + 0x10c, pipe->alpha);
+		}
+	}
+
+	if (pipe->transp != MDP_TRANSP_NOP) {
+		transp_color_key(pipe->src_format, pipe->transp, &c0, &c1, &c2);
+		if (pipe->is_fg) {
+			blend_op |= MDP4_BLEND_FG_TRANSP_EN; /* Fg blocked */
+			/* lower limit */
+			if (c0 > 0x10)
+				c0 -= 0x10;
+			if (c1 > 0x10)
+				c1 -= 0x10;
+			if (c2 > 0x10)
+				c2 -= 0x10;
+			outpdw(overlay_base + off + 0x110,
+						(c1 << 16 | c0));/* low */
+			outpdw(overlay_base + off + 0x114, c2);/* low */
+			/* upper limit */
+			if ((c0 + 0x20) < 0x0fff)
+				c0 += 0x20;
+			else
+				c0 = 0x0fff;
+			if ((c1 + 0x20) < 0x0fff)
+				c1 += 0x20;
+			else
+				c1 = 0x0fff;
+			if ((c2 + 0x20) < 0x0fff)
+				c2 += 0x20;
+			else
+				c2 = 0x0fff;
+			outpdw(overlay_base + off + 0x118,
+					(c1 << 16 | c0));/* high */
+			outpdw(overlay_base + off + 0x11c, c2);/* high */
+		} else {
+			blend_op |= MDP4_BLEND_BG_TRANSP_EN; /* bg blocked */
+			/* lower limit */
+			if (c0 > 0x10)
+				c0 -= 0x10;
+			if (c1 > 0x10)
+				c1 -= 0x10;
+			if (c2 > 0x10)
+				c2 -= 0x10;
+			outpdw(overlay_base + 0x180,
+						(c1 << 16 | c0));/* low */
+			outpdw(overlay_base + 0x184, c2);/* low */
+			/* upper limit */
+			if ((c0 + 0x20) < 0x0fff)
+				c0 += 0x20;
+			else
+				c0 = 0x0fff;
+			if ((c1 + 0x20) < 0x0fff)
+				c1 += 0x20;
+			else
+				c1 = 0x0fff;
+			if ((c2 + 0x20) < 0x0fff)
+				c2 += 0x20;
+			else
+				c2 = 0x0fff;
+			outpdw(overlay_base + 0x188,
+						(c1 << 16 | c0));/* high */
+			outpdw(overlay_base + 0x18c, c2);/* high */
+		}
+	}
+	outpdw(overlay_base + off + 0x104, blend_op);
+}
+
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all)
+{
+	uint32 bits = 0;
+
+	if (pipe->mixer_num == MDP4_MIXER1)
+		bits |= 0x02;
+	else
+		bits |= 0x01;
+
+	if (all) {
+		if (pipe->pipe_type == OVERLAY_TYPE_RGB) {
+			if (pipe->pipe_num == OVERLAY_PIPE_RGB2)
+				bits |= 0x20;
+			else
+				bits |= 0x10;
+		} else {
+			if (pipe->pipe_num == OVERLAY_PIPE_VG2)
+				bits |= 0x08;
+			else
+				bits |= 0x04;
+		}
+	}
+
+	outpdw(MDP_BASE + 0x18000, bits);	/* MDP_OVERLAY_REG_FLUSH */
+
+	while (inpdw(MDP_BASE + 0x18000) & bits) /* self clear when complete */
+		;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_ndx2pipe(int ndx)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	if (ndx == 0 || ndx >= MDP4_MAX_OVERLAY_PIPE)
+		return NULL;
+
+	pipe = &ctrl->plist[ndx - 1];	/* ndx start from 1 */
+
+	if (pipe->pipe_ndx == 0)
+		return NULL;
+
+	return pipe;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void)
+{
+	int i;
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = &ctrl->plist[0];
+	for (i = 0; i < MDP4_MAX_OVERLAY_PIPE; i++) {
+		if (pipe->pipe_ndx == 0) {
+			pipe->pipe_ndx = i + 1;	/* start from 1 */
+			init_completion(&pipe->comp);
+	printk(KERN_INFO "mdp4_overlay_pipe_alloc: pipe=%x ndx=%d\n",
+					(int)pipe, pipe->pipe_ndx);
+			return pipe;
+		}
+		pipe++;
+	}
+
+	return NULL;
+}
+
+
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe)
+{
+	printk(KERN_INFO "mdp4_overlay_pipe_free: pipe=%x ndx=%d\n",
+					(int)pipe, pipe->pipe_ndx);
+	memset(pipe, 0, sizeof(*pipe));
+}
+
+static int get_pipe_num(int ptype, int stage)
+{
+	if (ptype == OVERLAY_TYPE_RGB) {
+		if (stage == MDP4_MIXER_STAGE_BASE)
+			return OVERLAY_PIPE_RGB1;
+		else
+			return OVERLAY_PIPE_RGB2;
+	} else {
+		if (stage == MDP4_MIXER_STAGE0)
+			return OVERLAY_PIPE_VG1;
+		else
+			return OVERLAY_PIPE_VG2;
+	}
+}
+
+int mdp4_overlay_req_check(uint32 id, uint32 z_order, uint32 mixer)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = ctrl->stage[mixer][z_order];
+
+	if (pipe == NULL)
+		return 0;
+
+	if (pipe->pipe_ndx == id)	/* same req, recycle */
+		return 0;
+
+	return -EPERM;
+}
+
+static int mdp4_overlay_req2pipe(struct mdp_overlay *req, int mixer,
+			struct mdp4_overlay_pipe **ppipe)
+{
+	struct mdp4_overlay_pipe *pipe;
+	int ret, ptype;
+
+	if (mixer >= MDP4_MAX_MIXER) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: mixer out of range!\n");
+		return -ERANGE;
+	}
+
+	if (req->z_order < 0 || req->z_order > 2) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: z_order=%d out of range!\n",
+				req->z_order);
+		return -ERANGE;
+	}
+
+	if (req->src_rect.h == 0 || req->src_rect.w == 0) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: src img of zero size!\n");
+		return -EINVAL;
+	}
+
+	ret = mdp4_overlay_req_check(req->id, req->z_order, mixer);
+	if (ret < 0)
+		return ret;
+
+	ptype = mdp4_overlay_format2type(req->src.format);
+	if (ptype < 0)
+		return ptype;
+
+	if (req->id == MSMFB_NEW_REQUEST)  /* new request */
+		pipe = mdp4_overlay_pipe_alloc();
+	else
+		pipe = mdp4_overlay_ndx2pipe(req->id);
+
+	if (pipe == NULL)
+		return -ENOMEM;
+
+	pipe->src_format = req->src.format;
+	ret = mdp4_overlay_format2pipe(pipe);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * base layer == 1, reserved for frame buffer
+	 * zorder 0 == stage 0 == 2
+	 * zorder 1 == stage 1 == 3
+	 * zorder 2 == stage 2 == 4
+	 */
+	if (req->id == MSMFB_NEW_REQUEST) {  /* new request */
+		pipe->mixer_stage = req->z_order + MDP4_MIXER_STAGE0;
+		pipe->pipe_type = ptype;
+		pipe->pipe_num = get_pipe_num(ptype, pipe->mixer_stage);
+		printk(KERN_INFO "mpd4_overlay_req2pipe: zorder=%d pipe_num=%d\n",
+				req->z_order, pipe->pipe_num);
+	}
+
+	pipe->src_width = req->src.width & 0x07ff;	/* source img width */
+	pipe->src_height = req->src.height & 0x07ff;	/* source img height */
+	pipe->src_h = req->src_rect.h & 0x07ff;
+	pipe->src_w = req->src_rect.w & 0x07ff;
+	pipe->src_y = req->src_rect.y & 0x07ff;
+	pipe->src_x = req->src_rect.x & 0x07ff;
+	pipe->dst_h = req->dst_rect.h & 0x07ff;
+	pipe->dst_w = req->dst_rect.w & 0x07ff;
+	pipe->dst_y = req->dst_rect.y & 0x07ff;
+	pipe->dst_x = req->dst_rect.x & 0x07ff;
+
+	if (req->flags & MDP_FLIP_LR)
+		pipe->op_mode |= MDP4_OP_FLIP_LR;
+
+	if (req->flags & MDP_FLIP_UD)
+		pipe->op_mode |= MDP4_OP_FLIP_UD;
+
+	if (req->flags & MDP_DITHER)
+		pipe->op_mode |= MDP4_OP_DITHER_EN;
+
+	if (req->flags & MDP_DEINTERLACE)
+		pipe->op_mode |= MDP4_OP_DEINT_ODD_REF;
+
+	pipe->is_fg = req->is_fg;/* control alpha and color key */
+
+	pipe->alpha = req->alpha & 0x0ff;
+
+	pipe->transp = req->transp_mask;
+
+	*ppipe = pipe;
+
+	return 0;
+}
+
+int get_img(struct msmfb_data *img, struct fb_info *info,
+	unsigned long *start, unsigned long *len, struct file **pp_file)
+{
+	int put_needed, ret = 0;
+	struct file *file;
+#ifdef CONFIG_ANDROID_PMEM
+	unsigned long vstart;
+#endif
+
+#ifdef CONFIG_ANDROID_PMEM
+	if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+		return 0;
+#endif
+	file = fget_light(img->memory_id, &put_needed);
+	if (file == NULL)
+		return -1;
+
+	if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+		*start = info->fix.smem_start;
+		*len = info->fix.smem_len;
+		*pp_file = file;
+	} else {
+		ret = -1;
+		fput_light(file, put_needed);
+	}
+	return ret;
+}
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = mdp4_overlay_ndx2pipe(req->id);
+	if (pipe == NULL)
+		return -ENODEV;
+
+	*req = pipe->req_data;
+
+	return 0;
+}
+
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	int ret, mixer;
+	struct mdp4_overlay_pipe *pipe;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	if (req->src.format == MDP_FB_FORMAT)
+		req->src.format = mfd->fb_imgType;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	mixer = info->node; /* minor number of char device */
+
+	ret = mdp4_overlay_req2pipe(req, mixer, &pipe);
+	if (ret < 0) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		return ret;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+
+	if (lcdc == 0) { /* mddi */
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	}
+
+	/* return id back to user */
+	req->id = pipe->pipe_ndx;	/* pipe_ndx start from 1 */
+	pipe->req_data = *req;		/* keep original req */
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
+
+int mdp4_overlay_unset(struct fb_info *info, int ndx)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct mdp4_overlay_pipe *pipe;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	pipe = mdp4_overlay_ndx2pipe(ndx);
+
+	if (pipe == NULL) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		return -ENODEV;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+
+	mdp4_mixer_stage_down(pipe);
+
+	if (lcdc == 0) { /* mddi */
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	}
+
+	if (lcdc) /* LCDC mode */
+		mdp4_overlay_reg_flush(pipe, 0);
+
+	mdp4_overlay_pipe_free(pipe);
+
+	if (lcdc == 0) { /* mddi */
+		mdp4_mddi_overlay_restore();
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
+
+struct tile_desc {
+	uint32 width;  /* tile's width */
+	uint32 height; /* tile's height */
+	uint32 row_tile_w; /* tiles per row's width */
+	uint32 row_tile_h; /* tiles per row's height */
+};
+
+void tile_samsung(struct tile_desc *tp)
+{
+	/*
+	 * each row of samsung tile consists of two tiles in height
+	 * and two tiles in width which means width should align to
+	 * 64 x 2 bytes and height should align to 32 x 2 bytes.
+	 * video decoder generate two tiles in width and one tile
+	 * in height which ends up height align to 32 X 1 bytes.
+	 */
+	tp->width = 64;		/* 64 bytes */
+	tp->row_tile_w = 2;	/* 2 tiles per row's width */
+	tp->height = 32;	/* 32 bytes */
+	tp->row_tile_h = 1;	/* 1 tiles per row's height */
+}
+
+uint32 tile_mem_size(struct mdp4_overlay_pipe *pipe, struct tile_desc *tp)
+{
+	uint32 tile_w, tile_h;
+	uint32 row_num_w, row_num_h;
+
+
+	tile_w = tp->width * tp->row_tile_w;
+	tile_h = tp->height * tp->row_tile_h;
+
+	row_num_w = (pipe->src_width + tile_w - 1) / tile_w;
+	row_num_h = (pipe->src_height + tile_h - 1) / tile_h;
+
+	return row_num_w * row_num_h * tile_w * tile_h;
+}
+
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+		struct file **pp_src_file)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct msmfb_data *img;
+	struct mdp4_overlay_pipe *pipe;
+	ulong start, addr;
+	ulong len = 0;
+	struct file *p_src_file = 0;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	pipe = mdp4_overlay_ndx2pipe(req->id);
+	if (pipe == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	img = &req->data;
+	get_img(img, info, &start, &len, &p_src_file);
+	if (len == 0) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		printk(KERN_ERR "mdp_overlay_play: could not retrieve"
+				       " image from memory\n");
+		return -1;
+	}
+	*pp_src_file = p_src_file;
+
+	addr = start + img->offset;
+	pipe->srcp0_addr = addr;
+	pipe->srcp0_ystride = pipe->src_width * pipe->bpp;
+
+	if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+		if (pipe->frame_format == MDP4_FRAME_FORMAT_VIDEO_SUPERTILE) {
+			struct tile_desc tile;
+
+			tile_samsung(&tile);
+			pipe->srcp1_addr = addr + tile_mem_size(pipe, &tile);
+		} else
+			pipe->srcp1_addr = addr +
+					pipe->src_width * pipe->src_height;
+
+		pipe->srcp0_ystride = pipe->src_width;
+		pipe->srcp1_ystride = pipe->src_width;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+	lcdc &= 0x01; /* LCDC mode */
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG)
+		mdp4_overlay_vg_setup(pipe);	/* video/graphic pipe */
+	else
+		mdp4_overlay_rgb_setup(pipe);	/* rgb pipe */
+
+	mdp4_mixer_blend_setup(pipe);
+	mdp4_mixer_stage_up(pipe);
+
+	if (lcdc) { /* LCDC mode */
+		mdp4_overlay_reg_flush(pipe, 1);
+	}
+
+	if (lcdc) { /* LCDC mode */
+		if (pipe->mixer_stage != MDP4_MIXER_STAGE_BASE) { /* done */
+			mutex_unlock(&mfd->dma->ov_mutex);
+			return 0;
+		}
+	}
+
+	if (lcdc == 0) { /* MDDI mode */
+#ifdef MDP4_NONBLOCKING
+		if (mfd->panel_power_on)
+#else
+		if (!mfd->dma->busy && mfd->panel_power_on)
+#endif
+			mdp4_mddi_overlay_kickoff(mfd, pipe);
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay_lcdc.c b/drivers/staging/msm/mdp4_overlay_lcdc.c
new file mode 100644
index 00000000000..a6ab8ec83f5
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_lcdc.c
@@ -0,0 +1,313 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE	0xC0000
+#else
+#define LCDC_BASE	0xE0000
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+static struct mdp4_overlay_pipe *lcdc_pipe;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+	int lcdc_width;
+	int lcdc_height;
+	int lcdc_bpp;
+	int lcdc_border_clr;
+	int lcdc_underflow_clr;
+	int lcdc_hsync_skew;
+
+	int hsync_period;
+	int hsync_ctrl;
+	int vsync_period;
+	int display_hctl;
+	int display_v_start;
+	int display_v_end;
+	int active_hctl;
+	int active_h_start;
+	int active_h_end;
+	int active_v_start;
+	int active_v_end;
+	int ctrl_polarity;
+	int h_back_porch;
+	int h_front_porch;
+	int v_back_porch;
+	int v_front_porch;
+	int hsync_pulse_width;
+	int vsync_pulse_width;
+	int hsync_polarity;
+	int vsync_polarity;
+	int data_en_polarity;
+	int hsync_start_x;
+	int hsync_end_x;
+	uint8 *buf;
+	int bpp, ptype;
+	uint32 format;
+	struct fb_info *fbi;
+	struct fb_var_screeninfo *var;
+	struct msm_fb_data_type *mfd;
+	struct mdp4_overlay_pipe *pipe;
+	int ret;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	var = &fbi->var;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	if (bpp == 2)
+		format = MDP_RGB_565;
+	else if (bpp == 3)
+		format = MDP_RGB_888;
+	else
+		format = MDP_ARGB_8888;
+
+
+	if (lcdc_pipe == NULL) {
+		ptype = mdp4_overlay_format2type(format);
+		pipe = mdp4_overlay_pipe_alloc();
+		pipe->pipe_type = ptype;
+		/* use RGB1 pipe */
+		pipe->pipe_num  = OVERLAY_PIPE_RGB1;
+		pipe->mixer_stage  = MDP4_MIXER_STAGE_BASE;
+		pipe->mixer_num  = MDP4_MIXER0;
+		pipe->src_format = format;
+		mdp4_overlay_format2pipe(pipe);
+
+		lcdc_pipe = pipe; /* keep it */
+	} else {
+		pipe = lcdc_pipe;
+	}
+
+	pipe->src_height = fbi->var.yres;
+	pipe->src_width = fbi->var.xres;
+	pipe->src_h = fbi->var.yres;
+	pipe->src_w = fbi->var.xres;
+	pipe->src_y = 0;
+	pipe->src_x = 0;
+	pipe->srcp0_addr = (uint32) buf;
+	pipe->srcp0_ystride = fbi->fix.line_length;
+
+	mdp4_overlay_dmap_xy(pipe);
+	mdp4_overlay_dmap_cfg(mfd, 1);
+
+	mdp4_overlay_rgb_setup(pipe);
+
+	mdp4_mixer_stage_up(pipe);
+
+	mdp4_overlayproc_cfg(pipe);
+
+	/*
+	 * LCDC timing setting
+	 */
+	h_back_porch = var->left_margin;
+	h_front_porch = var->right_margin;
+	v_back_porch = var->upper_margin;
+	v_front_porch = var->lower_margin;
+	hsync_pulse_width = var->hsync_len;
+	vsync_pulse_width = var->vsync_len;
+	lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+	lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+	lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+	lcdc_width = mfd->panel_info.xres;
+	lcdc_height = mfd->panel_info.yres;
+	lcdc_bpp = mfd->panel_info.bpp;
+
+	hsync_period =
+	    hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+	hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+	hsync_start_x = hsync_pulse_width + h_back_porch;
+	hsync_end_x = hsync_period - h_front_porch - 1;
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+	vsync_period =
+	    (vsync_pulse_width + v_back_porch + lcdc_height +
+	     v_front_porch) * hsync_period;
+	display_v_start =
+	    (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+	display_v_end =
+	    vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+	if (lcdc_width != var->xres) {
+		active_h_start = hsync_start_x + first_pixel_start_x;
+		active_h_end = active_h_start + var->xres - 1;
+		active_hctl =
+		    ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+	} else {
+		active_hctl = 0;
+	}
+
+	if (lcdc_height != var->yres) {
+		active_v_start =
+		    display_v_start + first_pixel_start_y * hsync_period;
+		active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+		active_v_start |= ACTIVE_START_Y_EN;
+	} else {
+		active_v_start = 0;
+		active_v_end = 0;
+	}
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	hsync_polarity = 1;
+	vsync_polarity = 1;
+	lcdc_underflow_clr |= 0x80000000;	/* enable recovery */
+#else
+	hsync_polarity = 0;
+	vsync_polarity = 0;
+#endif
+	data_en_polarity = 0;
+
+	ctrl_polarity =
+	    (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x4, hsync_ctrl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x8, vsync_period);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0xc, vsync_pulse_width * hsync_period);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x10, display_hctl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x14, display_v_start);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x18, display_v_end);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x28, lcdc_border_clr);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x2c, lcdc_underflow_clr);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x30, lcdc_hsync_skew);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x38, ctrl_polarity);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x1c, active_hctl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x20, active_v_start);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x24, active_v_end);
+
+	ret = panel_next_on(pdev);
+	if (ret == 0) {
+		/* enable LCDC block */
+		MDP_OUTP(MDP_BASE + LCDC_BASE, 1);
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	}
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mdp4_overlay_pipe *pipe;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + LCDC_BASE, 0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_off(pdev);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	/* dis-engage rgb0 from mixer */
+	pipe = lcdc_pipe;
+	mdp4_mixer_stage_down(pipe);
+
+	return ret;
+}
+
+/*
+ * mdp4_overlay0_done_lcdc: called from isr
+ */
+void mdp4_overlay0_done_lcdc()
+{
+	complete(&lcdc_pipe->comp);
+}
+
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+	struct mdp4_overlay_pipe *pipe;
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since it's lcdc mode */
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	mutex_lock(&mfd->dma->ov_mutex);
+
+	pipe = lcdc_pipe;
+	pipe->srcp0_addr = (uint32) buf;
+	mdp4_overlay_rgb_setup(pipe);
+	mdp4_overlay_reg_flush(pipe, 1); /* rgb1 and mixer0 */
+
+	/* enable irq */
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	INIT_COMPLETION(lcdc_pipe->comp);
+	mfd->dma->waiting = TRUE;
+	outp32(MDP_INTR_CLEAR, INTR_OVERLAY0_DONE);
+	mdp_intr_mask |= INTR_OVERLAY0_DONE;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+	wait_for_completion_killable(&lcdc_pipe->comp);
+	mdp_disable_irq(MDP_OVERLAY0_TERM);
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_overlay_mddi.c b/drivers/staging/msm/mdp4_overlay_mddi.c
new file mode 100644
index 00000000000..be1b2874185
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_mddi.c
@@ -0,0 +1,254 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+static struct mdp4_overlay_pipe *mddi_pipe;
+static struct mdp4_overlay_pipe *pending_pipe;
+static struct msm_fb_data_type *mddi_mfd;
+
+#define WHOLESCREEN
+
+void mdp4_overlay_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	uint8 *src;
+	int bpp, ptype;
+	uint32 format;
+	uint32 mddi_ld_param;
+	uint16 mddi_vdo_packet_reg;
+	struct mdp4_overlay_pipe *pipe;
+
+	if (mfd->key != MFD_KEY)
+		return;
+
+	mddi_mfd = mfd;		/* keep it */
+
+	bpp = iBuf->bpp;
+
+	if (bpp == 2)
+		format = MDP_RGB_565;
+	else if (bpp == 3)
+		format = MDP_RGB_888;
+	else
+		format = MDP_ARGB_8888;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	if (mddi_pipe == NULL) {
+		ptype = mdp4_overlay_format2type(format);
+		pipe = mdp4_overlay_pipe_alloc();
+		pipe->pipe_type = ptype;
+		/* use RGB1 pipe */
+		pipe->pipe_num  = OVERLAY_PIPE_RGB1;
+		pipe->mixer_num  = MDP4_MIXER0;
+		pipe->src_format = format;
+		mdp4_overlay_format2pipe(pipe);
+
+		mddi_pipe = pipe; /* keep it */
+
+		mddi_ld_param = 0;
+		mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+		if (mfd->panel_info.type == MDDI_PANEL) {
+			if (mfd->panel_info.pdest == DISPLAY_1)
+				mddi_ld_param = 0;
+			else
+				mddi_ld_param = 1;
+		} else {
+			mddi_ld_param = 2;
+		}
+
+		MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+		MDP_OUTP(MDP_BASE + 0x00094,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+	} else {
+		pipe = mddi_pipe;
+	}
+
+
+	src = (uint8 *) iBuf->buf;
+
+#ifdef WHOLESCREEN
+	{
+		struct fb_info *fbi;
+
+		fbi = mfd->fbi;
+		pipe->src_height = fbi->var.yres;
+		pipe->src_width = fbi->var.xres;
+		pipe->src_h = fbi->var.yres;
+		pipe->src_w = fbi->var.xres;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = fbi->var.yres;
+		pipe->dst_w = fbi->var.xres;
+		pipe->dst_y = 0;
+		pipe->dst_x = 0;
+		pipe->srcp0_addr = (uint32)src;
+		pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+	}
+
+#else
+	if (mdp4_overlay_active(MDP4_MIXER0)) {
+		struct fb_info *fbi;
+
+		fbi = mfd->fbi;
+		pipe->src_height = fbi->var.yres;
+		pipe->src_width = fbi->var.xres;
+		pipe->src_h = fbi->var.yres;
+		pipe->src_w = fbi->var.xres;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = fbi->var.yres;
+		pipe->dst_w = fbi->var.xres;
+		pipe->dst_y = 0;
+		pipe->dst_x = 0;
+		pipe->srcp0_addr = (uint32) src;
+		pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+	} else {
+		/* starting input address */
+		src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * bpp;
+
+		pipe->src_height = iBuf->dma_h;
+		pipe->src_width = iBuf->dma_w;
+		pipe->src_h = iBuf->dma_h;
+		pipe->src_w = iBuf->dma_w;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = iBuf->dma_h;
+		pipe->dst_w = iBuf->dma_w;
+		pipe->dst_y = iBuf->dma_y;
+		pipe->dst_x = iBuf->dma_x;
+		pipe->srcp0_addr = (uint32) src;
+		pipe->srcp0_ystride = iBuf->ibuf_width * bpp;
+	}
+#endif
+
+	pipe->mixer_stage  = MDP4_MIXER_STAGE_BASE;
+
+	mdp4_overlay_rgb_setup(pipe);
+
+	mdp4_mixer_stage_up(pipe);
+
+	mdp4_overlayproc_cfg(pipe);
+
+	mdp4_overlay_dmap_xy(pipe);
+
+	mdp4_overlay_dmap_cfg(mfd, 0);
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+}
+
+/*
+ * mdp4_overlay0_done_mddi: called from isr
+ */
+void mdp4_overlay0_done_mddi()
+{
+	if (pending_pipe)
+		complete(&pending_pipe->comp);
+}
+
+void mdp4_mddi_overlay_restore(void)
+{
+	/* mutex holded by caller */
+	mdp4_overlay_update_lcd(mddi_mfd);
+	mdp4_mddi_overlay_kickoff(mddi_mfd, mddi_pipe);
+}
+
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+				struct mdp4_overlay_pipe *pipe)
+{
+#ifdef MDP4_NONBLOCKING
+	unsigned long flag;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	if (mfd->dma->busy == TRUE) {
+		INIT_COMPLETION(pipe->comp);
+		pending_pipe = pipe;
+	}
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	if (pending_pipe != NULL) {
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&pipe->comp);
+		pending_pipe = NULL;
+	}
+	down(&mfd->sem);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	mfd->dma->busy = TRUE;
+	/* start OVERLAY pipe */
+	mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+	up(&mfd->sem);
+#else
+	down(&mfd->sem);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	mfd->dma->busy = TRUE;
+	INIT_COMPLETION(pipe->comp);
+	pending_pipe = pipe;
+
+	/* start OVERLAY pipe */
+	mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+	up(&mfd->sem);
+
+	/* wait until DMA finishes the current job */
+	wait_for_completion_killable(&pipe->comp);
+	mdp_disable_irq(MDP_OVERLAY0_TERM);
+#endif
+
+}
+
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd)
+{
+	mutex_lock(&mfd->dma->ov_mutex);
+
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		mdp4_overlay_update_lcd(mfd);
+
+		mdp4_mddi_overlay_kickoff(mfd, mddi_pipe);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_util.c b/drivers/staging/msm/mdp4_util.c
new file mode 100644
index 00000000000..fd97f520599
--- /dev/null
+++ b/drivers/staging/msm/mdp4_util.c
@@ -0,0 +1,1686 @@
+
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+void mdp4_sw_reset(ulong bits)
+{
+	bits &= 0x1f;	/* 5 bits */
+	outpdw(MDP_BASE + 0x001c, bits);	/* MDP_SW_RESET */
+
+	while (inpdw(MDP_BASE + 0x001c) & bits) /* self clear when complete */
+		;
+	MSM_FB_INFO("mdp4_sw_reset: 0x%x\n", (int)bits);
+}
+
+void mdp4_overlay_cfg(int overlayer, int blt_mode, int refresh, int direct_out)
+{
+	ulong bits = 0;
+
+	if (blt_mode)
+		bits |= (1 << 3);
+	refresh &= 0x03;	/* 2 bites */
+	bits |= (refresh << 1);
+	direct_out &= 0x01;
+	bits |= direct_out;
+
+	if (overlayer == MDP4_MIXER0)
+		outpdw(MDP_BASE + 0x10004, bits); /* MDP_OVERLAY0_CFG */
+	else
+		outpdw(MDP_BASE + 0x18004, bits); /* MDP_OVERLAY1_CFG */
+
+	MSM_FB_INFO("mdp4_overlay_cfg: 0x%x\n", (int)inpdw(MDP_BASE + 0x10004));
+}
+
+void mdp4_display_intf_sel(int output, ulong intf)
+{
+	ulong bits, mask;
+
+	bits = inpdw(MDP_BASE + 0x0038);	/* MDP_DISP_INTF_SEL */
+
+	mask = 0x03;	/* 2 bits */
+	intf &= 0x03;	/* 2 bits */
+
+	switch (output) {
+	case EXTERNAL_INTF_SEL:
+		intf <<= 4;
+		mask <<= 4;
+		break;
+	case SECONDARY_INTF_SEL:
+		intf &= 0x02;	/* only MDDI and EBI2 support */
+		intf <<= 2;
+		mask <<= 2;
+		break;
+	default:
+		break;
+	}
+
+
+	bits &= ~mask;
+	bits |= intf;
+
+	outpdw(MDP_BASE + 0x0038, bits);	/* MDP_DISP_INTF_SEL */
+
+  MSM_FB_INFO("mdp4_display_intf_sel: 0x%x\n", (int)inpdw(MDP_BASE + 0x0038));
+}
+
+unsigned long mdp4_display_status(void)
+{
+	return inpdw(MDP_BASE + 0x0018) & 0x3ff;	/* MDP_DISPLAY_STATUS */
+}
+
+void mdp4_ebi2_lcd_setup(int lcd, ulong base, int ystride)
+{
+	/* always use memory map */
+	ystride &= 0x01fff;	/* 13 bits */
+	if (lcd == EBI2_LCD0) {
+		outpdw(MDP_BASE + 0x0060, base);/* MDP_EBI2_LCD0 */
+		outpdw(MDP_BASE + 0x0068, ystride);/* MDP_EBI2_LCD0_YSTRIDE */
+	} else {
+		outpdw(MDP_BASE + 0x0064, base);/* MDP_EBI2_LCD1 */
+		outpdw(MDP_BASE + 0x006c, ystride);/* MDP_EBI2_LCD1_YSTRIDE */
+	}
+}
+
+void mdp4_mddi_setup(int mddi, unsigned long id)
+{
+	ulong 	bits;
+
+	if (mddi == MDDI_EXTERNAL_SET)
+		bits = 0x02;
+	else if (mddi == MDDI_SECONDARY_SET)
+		bits = 0x01;
+	else
+		bits = 0;	/* PRIMARY_SET */
+
+	id <<= 16;
+
+	bits |= id;
+
+	outpdw(MDP_BASE + 0x0090, bits); /* MDP_MDDI_PARAM_WR_SEL */
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file)
+{
+
+	/* not implemented yet */
+	return -1;
+}
+
+void mdp4_hw_init(void)
+{
+	ulong bits;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef MDP4_ERROR
+	/*
+	 * Issue software reset on DMA_P will casue DMA_P dma engine stall
+	 * on LCDC mode. However DMA_P does not stall at MDDI mode.
+	 * This need further investigation.
+	 */
+	mdp4_sw_reset(0x17);
+#endif
+
+	mdp4_clear_lcdc();
+
+	mdp4_mixer_blend_init(0);
+	mdp4_mixer_blend_init(1);
+	mdp4_vg_qseed_init(0);
+	mdp4_vg_qseed_init(1);
+	mdp4_vg_csc_mv_setup(0);
+	mdp4_vg_csc_mv_setup(1);
+	mdp4_vg_csc_pre_bv_setup(0);
+	mdp4_vg_csc_pre_bv_setup(1);
+	mdp4_vg_csc_post_bv_setup(0);
+	mdp4_vg_csc_post_bv_setup(1);
+	mdp4_vg_csc_pre_lv_setup(0);
+	mdp4_vg_csc_pre_lv_setup(1);
+	mdp4_vg_csc_post_lv_setup(0);
+	mdp4_vg_csc_post_lv_setup(1);
+
+	mdp4_mixer_gc_lut_setup(0);
+	mdp4_mixer_gc_lut_setup(1);
+
+	mdp4_vg_igc_lut_setup(0);
+	mdp4_vg_igc_lut_setup(1);
+
+	 mdp4_rgb_igc_lut_setup(0);
+	 mdp4_rgb_igc_lut_setup(1);
+
+	outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+
+	/* system interrupts */
+
+	bits =  mdp_intr_mask;
+	outpdw(MDP_BASE + 0x0050, bits);/* enable specififed interrupts */
+
+	/* histogram */
+	MDP_OUTP(MDP_BASE + 0x95010, 1);	/* auto clear HIST */
+
+	/* enable histogram interrupts */
+	outpdw(MDP_BASE + 0x9501c, INTR_HIST_DONE);
+
+	/* For the max read pending cmd config below, if the MDP clock     */
+	/* is less than the AXI clock, then we must use 3 pending          */
+	/* pending requests.  Otherwise, we should use 8 pending requests. */
+	/* In the future we should do this detection automatically.	   */
+
+	/* max read pending cmd config */
+	outpdw(MDP_BASE + 0x004c, 0x02222);	/* 3 pending requests */
+
+	/* dma_p fetch config */
+	outpdw(MDP_BASE + 0x91004, 0x27);	/* burst size of 8 */
+
+#ifndef CONFIG_FB_MSM_OVERLAY
+	/* both REFRESH_MODE and DIRECT_OUT are ignored at BLT mode */
+	mdp4_overlay_cfg(MDP4_MIXER0, OVERLAY_MODE_BLT, 0, 0);
+	mdp4_overlay_cfg(MDP4_MIXER1, OVERLAY_MODE_BLT, 0, 0);
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+
+void mdp4_clear_lcdc(void)
+{
+	uint32 bits;
+
+	bits = inpdw(MDP_BASE + 0xc0000);
+	if (bits & 0x01) /* enabled already */
+		return;
+
+	outpdw(MDP_BASE + 0xc0004, 0);	/* vsync ctrl out */
+	outpdw(MDP_BASE + 0xc0008, 0);	/* vsync period */
+	outpdw(MDP_BASE + 0xc000c, 0);	/* vsync pusle width */
+	outpdw(MDP_BASE + 0xc0010, 0);	/* lcdc display HCTL */
+	outpdw(MDP_BASE + 0xc0014, 0);	/* lcdc display v start */
+	outpdw(MDP_BASE + 0xc0018, 0);	/* lcdc display v end */
+	outpdw(MDP_BASE + 0xc001c, 0);	/* lcdc active hctl */
+	outpdw(MDP_BASE + 0xc0020, 0);	/* lcdc active v start */
+	outpdw(MDP_BASE + 0xc0024, 0);	/* lcdc active v end */
+	outpdw(MDP_BASE + 0xc0028, 0);	/* lcdc board color */
+	outpdw(MDP_BASE + 0xc002c, 0);	/* lcdc underflow ctrl */
+	outpdw(MDP_BASE + 0xc0030, 0);	/* lcdc hsync skew */
+	outpdw(MDP_BASE + 0xc0034, 0);	/* lcdc test ctl */
+	outpdw(MDP_BASE + 0xc0038, 0);	/* lcdc ctl polarity */
+}
+
+static struct mdp_dma_data overlay1_data;
+static int intr_dma_p;
+static int intr_dma_s;
+static int intr_dma_e;
+static int intr_overlay0;
+static int intr_overlay1;
+
+irqreturn_t mdp4_isr(int irq, void *ptr)
+{
+	uint32 isr, mask, lcdc;
+	struct mdp_dma_data *dma;
+
+	mdp_is_in_isr = TRUE;
+
+	while (1) {
+		isr = inpdw(MDP_INTR_STATUS);
+		if (isr == 0)
+			break;
+
+		mask = inpdw(MDP_INTR_ENABLE);
+		outpdw(MDP_INTR_CLEAR, isr);
+
+		isr &= mask;
+
+		if (unlikely(isr == 0))
+			break;
+
+		if (isr & INTR_DMA_P_DONE) {
+			intr_dma_p++;
+			lcdc = inpdw(MDP_BASE + 0xc0000);
+			dma = &dma2_data;
+			if (lcdc & 0x01) {	/* LCDC enable */
+				/* disable LCDC interrupt */
+				mdp_intr_mask &= ~INTR_DMA_P_DONE;
+				outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+				dma->waiting = FALSE;
+			} else {
+				dma->busy = FALSE;
+				mdp_pipe_ctrl(MDP_DMA2_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			}
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_S_DONE) {
+			intr_dma_s++;
+			dma = &dma_s_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA_S_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_E_DONE) {
+			intr_dma_e++;
+			dma = &dma_e_data;
+			mdp_intr_mask &= ~INTR_DMA_E_DONE;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+			dma->busy = FALSE;
+
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+		if (isr & INTR_OVERLAY0_DONE) {
+			intr_overlay0++;
+			lcdc = inpdw(MDP_BASE + 0xc0000);
+			dma = &dma2_data;
+			if (lcdc & 0x01) {	/* LCDC enable */
+				/* disable LCDC interrupt */
+				mdp_intr_mask &= ~INTR_OVERLAY0_DONE;
+				outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+				dma->waiting = FALSE;
+				mdp4_overlay0_done_lcdc();
+			} else {	/* MDDI */
+				dma->busy = FALSE;
+#ifdef MDP4_NONBLOCKING
+				mdp_disable_irq_nolock(MDP_OVERLAY0_TERM);
+#endif
+				mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+				mdp4_overlay0_done_mddi();
+			}
+		}
+		if (isr & INTR_OVERLAY1_DONE) {
+			intr_overlay1++;
+			dma = &overlay1_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_P_HISTOGRAM) {
+			isr = inpdw(MDP_DMA_P_HIST_INTR_STATUS);
+			mask = inpdw(MDP_DMA_P_HIST_INTR_ENABLE);
+			outpdw(MDP_DMA_P_HIST_INTR_CLEAR, isr);
+			isr &= mask;
+			if (isr & INTR_HIST_DONE) {
+				if (mdp_hist.r)
+					memcpy(mdp_hist.r, MDP_BASE + 0x95100,
+							mdp_hist.bin_cnt*4);
+				if (mdp_hist.g)
+					memcpy(mdp_hist.g, MDP_BASE + 0x95200,
+							mdp_hist.bin_cnt*4);
+				if (mdp_hist.b)
+					memcpy(mdp_hist.b, MDP_BASE + 0x95300,
+						mdp_hist.bin_cnt*4);
+				complete(&mdp_hist_comp);
+			}
+		}
+	}
+
+	mdp_is_in_isr = FALSE;
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * QSEED tables
+ */
+
+static uint32 vg_qseed_table0[] = {
+	0x5556aaff, 0x00000000, 0x00000000, 0x00000000
+};
+
+static uint32 vg_qseed_table1[] = {
+	0x76543210, 0xfedcba98
+};
+
+static uint32 vg_qseed_table2[] = {
+	0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+	0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+	0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+	0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+	0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+	0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+	0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+	0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+	0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+	0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+	0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+	0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+	0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+	0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+	0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+	0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+	0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+	0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+	0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+	0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+	0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+	0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+	0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+	0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+	0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+	0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+	0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+	0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+	0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+	0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+	0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+	0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+	0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+	0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+	0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+	0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+	0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+	0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+	0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+	0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+	0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+	0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+	0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+	0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+	0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+	0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+	0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+	0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+	0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+	0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+	0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+	0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+	0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+	0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+	0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+	0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+	0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+	0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+	0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+	0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+	0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+	0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+	0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+	0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+	0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+	0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+	0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+	0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+	0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+	0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+	0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+	0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+	0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+	0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+	0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+	0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+	0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+	0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+	0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+	0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+	0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+	0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+	0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+	0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+	0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+	0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+	0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+	0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+	0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+	0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+	0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+	0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+	0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+	0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+	0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+	0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+	0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+	0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+	0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+	0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+	0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+	0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+	0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+	0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+	0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+	0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+	0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+	0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+	0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+	0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+	0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+	0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+	0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+	0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+	0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+	0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+	0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+	0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+	0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+	0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+	0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+	0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+	0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+	0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+	0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+	0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+	0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+	0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+	0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+	0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+	0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+	0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+	0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+	0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+	0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+	0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+	0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+	0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+	0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+	0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+	0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+	0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+	0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+	0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+	0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+	0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+	0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+	0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+	0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+	0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+	0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+	0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+	0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+	0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+	0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+	0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+	0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+	0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+	0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+	0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+	0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+	0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+	0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+	0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+	0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+	0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+	0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+	0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+	0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+	0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+	0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+	0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+	0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+	0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+	0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+	0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+	0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+	0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+	0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+	0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+	0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+	0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+	0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+	0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+	0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+	0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+	0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+	0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+	0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+	0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+	0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+	0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+	0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+	0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+	0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+	0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+	0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+	0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+	0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+	0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+	0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+	0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+	0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+	0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+	0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+	0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+	0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+	0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+	0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+	0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+	0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+	0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+	0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+	0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+	0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+	0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+	0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+	0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+	0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+	0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+	0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+	0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+	0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+	0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+	0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+	0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+	0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+	0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+	0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+	0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+	0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+	0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+	0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+	0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+	0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+	0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+	0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+	0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+	0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+	0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+	0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+	0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+	0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+	0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+	0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+	0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+	0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+	0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+	0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+	0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+	0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+	0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+	0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+	0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+	0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+	0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff,
+	0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+	0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+	0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+	0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+	0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+	0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+	0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+	0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+	0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+	0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+	0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+	0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+	0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+	0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+	0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+	0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+	0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+	0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+	0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+	0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+	0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+	0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+	0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+	0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+	0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+	0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+	0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+	0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+	0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+	0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+	0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+	0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+	0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+	0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+	0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+	0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+	0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+	0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+	0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+	0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+	0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+	0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+	0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+	0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+	0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+	0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+	0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+	0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+	0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+	0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+	0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+	0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+	0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+	0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+	0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+	0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+	0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+	0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+	0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+	0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+	0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+	0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+	0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+	0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+	0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+	0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+	0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+	0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+	0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+	0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+	0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+	0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+	0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+	0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+	0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+	0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+	0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+	0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+	0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+	0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+	0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+	0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+	0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+	0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+	0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+	0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+	0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+	0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+	0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+	0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+	0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+	0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+	0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+	0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+	0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+	0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+	0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+	0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+	0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+	0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+	0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+	0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+	0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+	0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+	0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+	0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+	0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+	0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+	0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+	0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+	0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+	0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+	0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+	0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+	0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+	0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+	0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+	0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+	0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+	0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+	0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+	0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+	0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+	0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+	0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+	0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+	0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+	0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+	0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+	0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+	0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+	0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+	0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+	0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+	0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+	0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+	0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+	0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+	0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+	0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+	0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+	0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+	0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+	0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+	0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+	0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+	0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+	0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+	0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+	0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+	0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+	0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+	0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+	0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+	0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+	0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+	0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+	0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+	0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+	0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+	0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+	0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+	0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+	0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+	0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+	0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+	0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+	0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+	0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+	0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+	0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+	0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+	0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+	0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+	0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+	0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+	0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+	0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+	0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+	0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+	0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+	0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+	0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+	0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+	0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+	0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+	0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+	0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+	0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+	0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+	0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+	0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+	0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+	0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+	0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+	0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+	0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+	0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+	0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+	0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+	0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+	0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+	0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+	0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+	0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+	0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+	0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+	0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+	0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+	0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+	0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+	0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+	0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+	0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+	0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+	0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+	0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+	0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+	0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+	0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+	0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+	0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+	0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+	0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+	0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+	0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+	0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+	0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+	0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+	0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+	0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+	0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+	0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+	0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+	0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+	0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+	0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+	0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+	0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+	0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+	0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+	0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+	0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+	0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+	0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+	0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+	0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+	0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+	0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+	0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+	0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+	0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+	0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+	0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+	0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+	0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff
+};
+
+
+#define MDP4_QSEED_TABLE0_OFF 0x8100
+#define MDP4_QSEED_TABLE1_OFF 0x8200
+#define MDP4_QSEED_TABLE2_OFF 0x9000
+
+void mdp4_vg_qseed_init(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE0_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table0) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table0[i]);
+		off++;
+	}
+
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE1_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table1) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table1[i]);
+		off++;
+	}
+
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE2_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table2) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table2[i]);
+		off++;
+	}
+
+}
+
+void mdp4_mixer_blend_init(mixer_num)
+{
+	unsigned char *overlay_base;
+	int off;
+
+	if (mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* stage 0 to stage 2 */
+	off = 0;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+	off += 0x20;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+	off += 0x20;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+}
+
+
+static uint32 csc_matrix_tab[9] = {
+	0x0254, 0x0000, 0x0331,
+	0x0254, 0xff37, 0xfe60,
+	0x0254, 0x0409, 0x0000
+};
+
+static uint32 csc_pre_bv_tab[3] = {0xfff0, 0xff80, 0xff80 };
+static uint32 csc_post_bv_tab[3] = {0, 0, 0 };
+
+static  uint32 csc_pre_lv_tab[6] =  {0, 0xff, 0, 0xff, 0, 0xff };
+static  uint32 csc_post_lv_tab[6] = {0, 0xff, 0, 0xff, 0, 0xff };
+
+#define MDP4_CSC_MV_OFF 	0x4400
+#define MDP4_CSC_PRE_BV_OFF 	0x4500
+#define MDP4_CSC_POST_BV_OFF 	0x4580
+#define MDP4_CSC_PRE_LV_OFF 	0x4600
+#define MDP4_CSC_POST_LV_OFF 	0x4680
+
+void mdp4_vg_csc_mv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_MV_OFF);
+	for (i = 0; i < 9; i++) {
+		outpdw(off, csc_matrix_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_pre_bv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_PRE_BV_OFF);
+	for (i = 0; i < 3; i++) {
+		outpdw(off, csc_pre_bv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_post_bv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_POST_BV_OFF);
+	for (i = 0; i < 3; i++) {
+		outpdw(off, csc_post_bv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_pre_lv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_PRE_LV_OFF);
+
+	for (i = 0; i < 6; i++) {
+		outpdw(off, csc_pre_lv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_post_lv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_POST_LV_OFF);
+
+	for (i = 0; i < 6; i++) {
+		outpdw(off, csc_post_lv_tab[i]);
+		off++;
+	}
+}
+
+char gc_lut[] = {
+	0x0, 0x1, 0x2, 0x2, 0x3, 0x4, 0x5, 0x6,
+	0x6, 0x7, 0x8, 0x9, 0xA, 0xA, 0xB, 0xC,
+	0xD, 0xD, 0xE, 0xF, 0xF, 0x10, 0x10, 0x11,
+	0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x15, 0x15,
+	0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x18, 0x19,
+	0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B, 0x1B, 0x1C,
+	0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F,
+	0x1F, 0x1F, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21,
+	0x22, 0x22, 0x22, 0x22, 0x23, 0x23, 0x23, 0x24,
+	0x24, 0x24, 0x25, 0x25, 0x25, 0x25, 0x26, 0x26,
+	0x26, 0x26, 0x27, 0x27, 0x27, 0x28, 0x28, 0x28,
+	0x28, 0x29, 0x29, 0x29, 0x29, 0x2A, 0x2A, 0x2A,
+	0x2A, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2C, 0x2C,
+	0x2C, 0x2C, 0x2D, 0x2D, 0x2D, 0x2D, 0x2E, 0x2E,
+	0x2E, 0x2E, 0x2E, 0x2F, 0x2F, 0x2F, 0x2F, 0x30,
+	0x30, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x31,
+	0x31, 0x32, 0x32, 0x32, 0x32, 0x32, 0x33, 0x33,
+	0x33, 0x33, 0x33, 0x34, 0x34, 0x34, 0x34, 0x34,
+	0x35, 0x35, 0x35, 0x35, 0x35, 0x36, 0x36, 0x36,
+	0x36, 0x36, 0x37, 0x37, 0x37, 0x37, 0x37, 0x37,
+	0x38, 0x38, 0x38, 0x38, 0x38, 0x39, 0x39, 0x39,
+	0x39, 0x39, 0x39, 0x3A, 0x3A, 0x3A, 0x3A, 0x3A,
+	0x3A, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3C,
+	0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3D, 0x3D, 0x3D,
+	0x3D, 0x3D, 0x3D, 0x3E, 0x3E, 0x3E, 0x3E, 0x3E,
+	0x3E, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x40,
+	0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41,
+	0x41, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x42,
+	0x42, 0x42, 0x42, 0x43, 0x43, 0x43, 0x43, 0x43,
+	0x43, 0x43, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
+	0x44, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45,
+	0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x47,
+	0x47, 0x47, 0x47, 0x47, 0x47, 0x47, 0x48, 0x48,
+	0x48, 0x48, 0x48, 0x48, 0x48, 0x48, 0x49, 0x49,
+	0x49, 0x49, 0x49, 0x49, 0x49, 0x4A, 0x4A, 0x4A,
+	0x4A, 0x4A, 0x4A, 0x4A, 0x4A, 0x4B, 0x4B, 0x4B,
+	0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4C, 0x4C, 0x4C,
+	0x4C, 0x4C, 0x4C, 0x4C, 0x4D, 0x4D, 0x4D, 0x4D,
+	0x4D, 0x4D, 0x4D, 0x4D, 0x4E, 0x4E, 0x4E, 0x4E,
+	0x4E, 0x4E, 0x4E, 0x4E, 0x4E, 0x4F, 0x4F, 0x4F,
+	0x4F, 0x4F, 0x4F, 0x4F, 0x4F, 0x50, 0x50, 0x50,
+	0x50, 0x50, 0x50, 0x50, 0x50, 0x51, 0x51, 0x51,
+	0x51, 0x51, 0x51, 0x51, 0x51, 0x51, 0x52, 0x52,
+	0x52, 0x52, 0x52, 0x52, 0x52, 0x52, 0x53, 0x53,
+	0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x54,
+	0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54,
+	0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+	0x55, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56,
+	0x56, 0x56, 0x57, 0x57, 0x57, 0x57, 0x57, 0x57,
+	0x57, 0x57, 0x57, 0x58, 0x58, 0x58, 0x58, 0x58,
+	0x58, 0x58, 0x58, 0x58, 0x58, 0x59, 0x59, 0x59,
+	0x59, 0x59, 0x59, 0x59, 0x59, 0x59, 0x5A, 0x5A,
+	0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+	0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B,
+	0x5B, 0x5B, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+	0x5C, 0x5C, 0x5C, 0x5C, 0x5D, 0x5D, 0x5D, 0x5D,
+	0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5E, 0x5E,
+	0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E,
+	0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F,
+	0x5F, 0x5F, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+	0x60, 0x60, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+	0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x62,
+	0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62,
+	0x62, 0x62, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x64, 0x64, 0x64,
+	0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64,
+	0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65,
+	0x65, 0x65, 0x65, 0x66, 0x66, 0x66, 0x66, 0x66,
+	0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x67, 0x67,
+	0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67,
+	0x67, 0x67, 0x68, 0x68, 0x68, 0x68, 0x68, 0x68,
+	0x68, 0x68, 0x68, 0x68, 0x68, 0x69, 0x69, 0x69,
+	0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69,
+	0x69, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A,
+	0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6B, 0x6B, 0x6B,
+	0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B,
+	0x6B, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C,
+	0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6D, 0x6D, 0x6D,
+	0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D,
+	0x6D, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E,
+	0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6F, 0x6F, 0x6F,
+	0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F,
+	0x6F, 0x6F, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70,
+	0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x71, 0x71,
+	0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71,
+	0x71, 0x71, 0x71, 0x72, 0x72, 0x72, 0x72, 0x72,
+	0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+	0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73,
+	0x73, 0x73, 0x73, 0x73, 0x73, 0x74, 0x74, 0x74,
+	0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74,
+	0x74, 0x74, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+	0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+	0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76,
+	0x76, 0x76, 0x76, 0x76, 0x76, 0x77, 0x77, 0x77,
+	0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
+	0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x78, 0x78,
+	0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+	0x78, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+	0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x7A, 0x7A,
+	0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A,
+	0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7B, 0x7B, 0x7B,
+	0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B,
+	0x7B, 0x7B, 0x7B, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+	0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+	0x7C, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+	0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7F, 0x7F,
+	0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F,
+	0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x80, 0x80, 0x80,
+	0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x81, 0x81,
+	0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81,
+	0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82, 0x82,
+	0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82,
+	0x82, 0x82, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+	0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+	0x83, 0x83, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+	0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+	0x84, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+	0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+	0x85, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+	0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+	0x86, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+	0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+	0x87, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+	0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+	0x88, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+	0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+	0x89, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+	0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+	0x8A, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+	0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+	0x8B, 0x8B, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+	0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+	0x8C, 0x8C, 0x8C, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+	0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+	0x8D, 0x8D, 0x8D, 0x8D, 0x8E, 0x8E, 0x8E, 0x8E,
+	0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E,
+	0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8F, 0x8F, 0x8F,
+	0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F,
+	0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x90, 0x90,
+	0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90,
+	0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x91,
+	0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+	0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+	0x91, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+	0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+	0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+	0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+	0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+	0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+	0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x95, 0x95,
+	0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+	0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+	0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+	0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+	0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x97,
+	0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97,
+	0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+	0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+	0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+	0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+	0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+	0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+	0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+	0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B,
+	0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+	0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D,
+	0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D,
+	0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E,
+	0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+	0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+	0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+	0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+	0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+	0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+	0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+	0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+	0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+	0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+	0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+	0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+	0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+	0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+	0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+};
+
+void mdp4_mixer_gc_lut_setup(int mixer_num)
+{
+	unsigned char *base;
+	uint32 data;
+	char val;
+	int i, off;
+
+	if (mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	base += 0x4000;	/* GC_LUT offset */
+
+	off = 0;
+	for (i = 0; i < 4096; i++) {
+		val = gc_lut[i];
+		data = (val << 16 | val << 8 | val); /* R, B, and G are same */
+		outpdw(base + off, data);
+		off += 4;
+	}
+}
+
+uint32 igc_video_lut[] = {	 /* non linear */
+	0x0, 0x1, 0x2, 0x4, 0x5, 0x6, 0x7, 0x9,
+	0xA, 0xB, 0xC, 0xE, 0xF, 0x10, 0x12, 0x14,
+	0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F, 0x21, 0x23,
+	0x25, 0x28, 0x2A, 0x2D, 0x30, 0x32, 0x35, 0x38,
+	0x3B, 0x3E, 0x42, 0x45, 0x48, 0x4C, 0x4F, 0x53,
+	0x57, 0x5B, 0x5F, 0x63, 0x67, 0x6B, 0x70, 0x74,
+	0x79, 0x7E, 0x83, 0x88, 0x8D, 0x92, 0x97, 0x9C,
+	0xA2, 0xA8, 0xAD, 0xB3, 0xB9, 0xBF, 0xC5, 0xCC,
+	0xD2, 0xD8, 0xDF, 0xE6, 0xED, 0xF4, 0xFB, 0x102,
+	0x109, 0x111, 0x118, 0x120, 0x128, 0x130, 0x138, 0x140,
+	0x149, 0x151, 0x15A, 0x162, 0x16B, 0x174, 0x17D, 0x186,
+	0x190, 0x199, 0x1A3, 0x1AC, 0x1B6, 0x1C0, 0x1CA, 0x1D5,
+	0x1DF, 0x1EA, 0x1F4, 0x1FF, 0x20A, 0x215, 0x220, 0x22B,
+	0x237, 0x242, 0x24E, 0x25A, 0x266, 0x272, 0x27F, 0x28B,
+	0x298, 0x2A4, 0x2B1, 0x2BE, 0x2CB, 0x2D8, 0x2E6, 0x2F3,
+	0x301, 0x30F, 0x31D, 0x32B, 0x339, 0x348, 0x356, 0x365,
+	0x374, 0x383, 0x392, 0x3A1, 0x3B1, 0x3C0, 0x3D0, 0x3E0,
+	0x3F0, 0x400, 0x411, 0x421, 0x432, 0x443, 0x454, 0x465,
+	0x476, 0x487, 0x499, 0x4AB, 0x4BD, 0x4CF, 0x4E1, 0x4F3,
+	0x506, 0x518, 0x52B, 0x53E, 0x551, 0x565, 0x578, 0x58C,
+	0x5A0, 0x5B3, 0x5C8, 0x5DC, 0x5F0, 0x605, 0x61A, 0x62E,
+	0x643, 0x659, 0x66E, 0x684, 0x699, 0x6AF, 0x6C5, 0x6DB,
+	0x6F2, 0x708, 0x71F, 0x736, 0x74D, 0x764, 0x77C, 0x793,
+	0x7AB, 0x7C3, 0x7DB, 0x7F3, 0x80B, 0x824, 0x83D, 0x855,
+	0x86F, 0x888, 0x8A1, 0x8BB, 0x8D4, 0x8EE, 0x908, 0x923,
+	0x93D, 0x958, 0x973, 0x98E, 0x9A9, 0x9C4, 0x9DF, 0x9FB,
+	0xA17, 0xA33, 0xA4F, 0xA6C, 0xA88, 0xAA5, 0xAC2, 0xADF,
+	0xAFC, 0xB19, 0xB37, 0xB55, 0xB73, 0xB91, 0xBAF, 0xBCE,
+	0xBEC, 0xC0B, 0xC2A, 0xC4A, 0xC69, 0xC89, 0xCA8, 0xCC8,
+	0xCE8, 0xD09, 0xD29, 0xD4A, 0xD6B, 0xD8C, 0xDAD, 0xDCF,
+	0xDF0, 0xE12, 0xE34, 0xE56, 0xE79, 0xE9B, 0xEBE, 0xEE1,
+	0xF04, 0xF27, 0xF4B, 0xF6E, 0xF92, 0xFB6, 0xFDB, 0xFFF,
+};
+
+void mdp4_vg_igc_lut_setup(int vp_num)
+{
+	unsigned char *base;
+	int i, voff, off;
+	uint32 data, val;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	base = MDP_BASE + MDP4_VIDEO_BASE + voff + 0x5000;
+
+	off = 0;
+	for (i = 0; i < 256; i++) {
+		val = igc_video_lut[i];
+		data = (val << 16 | val);	/* color 0 and 1 */
+		outpdw(base + off, data);
+		outpdw(base + off + 0x800, val);	/* color 2 */
+		off += 4;
+	}
+}
+
+uint32 igc_rgb_lut[] = {   /* linear */
+	0x0, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70,
+	0x80, 0x91, 0xA1, 0xB1, 0xC1, 0xD1, 0xE1, 0xF1,
+	0x101, 0x111, 0x121, 0x131, 0x141, 0x151, 0x161, 0x171,
+	0x181, 0x191, 0x1A2, 0x1B2, 0x1C2, 0x1D2, 0x1E2, 0x1F2,
+	0x202, 0x212, 0x222, 0x232, 0x242, 0x252, 0x262, 0x272,
+	0x282, 0x292, 0x2A2, 0x2B3, 0x2C3, 0x2D3, 0x2E3, 0x2F3,
+	0x303, 0x313, 0x323, 0x333, 0x343, 0x353, 0x363, 0x373,
+	0x383, 0x393, 0x3A3, 0x3B3, 0x3C4, 0x3D4, 0x3E4, 0x3F4,
+	0x404, 0x414, 0x424, 0x434, 0x444, 0x454, 0x464, 0x474,
+	0x484, 0x494, 0x4A4, 0x4B4, 0x4C4, 0x4D5, 0x4E5, 0x4F5,
+	0x505, 0x515, 0x525, 0x535, 0x545, 0x555, 0x565, 0x575,
+	0x585, 0x595, 0x5A5, 0x5B5, 0x5C5, 0x5D5, 0x5E6, 0x5F6,
+	0x606, 0x616, 0x626, 0x636, 0x646, 0x656, 0x666, 0x676,
+	0x686, 0x696, 0x6A6, 0x6B6, 0x6C6, 0x6D6, 0x6E6, 0x6F7,
+	0x707, 0x717, 0x727, 0x737, 0x747, 0x757, 0x767, 0x777,
+	0x787, 0x797, 0x7A7, 0x7B7, 0x7C7, 0x7D7, 0x7E7, 0x7F7,
+	0x808, 0x818, 0x828, 0x838, 0x848, 0x858, 0x868, 0x878,
+	0x888, 0x898, 0x8A8, 0x8B8, 0x8C8, 0x8D8, 0x8E8, 0x8F8,
+	0x908, 0x919, 0x929, 0x939, 0x949, 0x959, 0x969, 0x979,
+	0x989, 0x999, 0x9A9, 0x9B9, 0x9C9, 0x9D9, 0x9E9, 0x9F9,
+	0xA09, 0xA19, 0xA2A, 0xA3A, 0xA4A, 0xA5A, 0xA6A, 0xA7A,
+	0xA8A, 0xA9A, 0xAAA, 0xABA, 0xACA, 0xADA, 0xAEA, 0xAFA,
+	0xB0A, 0xB1A, 0xB2A, 0xB3B, 0xB4B, 0xB5B, 0xB6B, 0xB7B,
+	0xB8B, 0xB9B, 0xBAB, 0xBBB, 0xBCB, 0xBDB, 0xBEB, 0xBFB,
+	0xC0B, 0xC1B, 0xC2B, 0xC3B, 0xC4C, 0xC5C, 0xC6C, 0xC7C,
+	0xC8C, 0xC9C, 0xCAC, 0xCBC, 0xCCC, 0xCDC, 0xCEC, 0xCFC,
+	0xD0C, 0xD1C, 0xD2C, 0xD3C, 0xD4C, 0xD5D, 0xD6D, 0xD7D,
+	0xD8D, 0xD9D, 0xDAD, 0xDBD, 0xDCD, 0xDDD, 0xDED, 0xDFD,
+	0xE0D, 0xE1D, 0xE2D, 0xE3D, 0xE4D, 0xE5D, 0xE6E, 0xE7E,
+	0xE8E, 0xE9E, 0xEAE, 0xEBE, 0xECE, 0xEDE, 0xEEE, 0xEFE,
+	0xF0E, 0xF1E, 0xF2E, 0xF3E, 0xF4E, 0xF5E, 0xF6E, 0xF7F,
+	0xF8F, 0xF9F, 0xFAF, 0xFBF, 0xFCF, 0xFDF, 0xFEF, 0xFFF,
+};
+
+void mdp4_rgb_igc_lut_setup(int num)
+{
+	unsigned char *base;
+	int i, voff, off;
+	uint32 data, val;
+
+	voff = MDP4_RGB_OFF * num;
+	base = MDP_BASE + MDP4_RGB_BASE + voff + 0x5000;
+
+	off = 0;
+	for (i = 0; i < 256; i++) {
+		val = igc_rgb_lut[i];
+		data = (val << 16 | val);	/* color 0 and 1 */
+		outpdw(base + off, data);
+		outpdw(base + off + 0x800, val);	/* color 2 */
+		off += 4;
+	}
+}
diff --git a/drivers/staging/msm/mdp_cursor.c b/drivers/staging/msm/mdp_cursor.c
new file mode 100644
index 00000000000..7d28f30d931
--- /dev/null
+++ b/drivers/staging/msm/mdp_cursor.c
@@ -0,0 +1,104 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static int cursor_enabled;
+
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct fb_image *img = &cursor->image;
+	int calpha_en, transp_en;
+	int alpha;
+	int ret = 0;
+
+	if ((img->width > MDP_CURSOR_WIDTH) ||
+	    (img->height > MDP_CURSOR_HEIGHT) ||
+	    (img->depth != 32))
+		return -EINVAL;
+
+	if (cursor->set & FB_CUR_SETPOS)
+		MDP_OUTP(MDP_BASE + 0x9004c, (img->dy << 16) | img->dx);
+
+	if (cursor->set & FB_CUR_SETIMAGE) {
+		ret = copy_from_user(mfd->cursor_buf, img->data,
+					img->width*img->height*4);
+		if (ret)
+			return ret;
+
+		if (img->bg_color == 0xffffffff)
+			transp_en = 0;
+		else
+			transp_en = 1;
+
+		alpha = (img->fg_color & 0xff000000) >> 24;
+
+		if (alpha)
+			calpha_en = 0x2; /* xrgb */
+		else
+			calpha_en = 0x1; /* argb */
+
+		MDP_OUTP(MDP_BASE + 0x90044, (img->height << 16) | img->width);
+		MDP_OUTP(MDP_BASE + 0x90048, mfd->cursor_buf_phys);
+		/* order the writes the cursor_buf before updating the
+		 * hardware */
+//		dma_coherent_pre_ops();
+		MDP_OUTP(MDP_BASE + 0x90060,
+			 (transp_en << 3) | (calpha_en << 1) |
+			 (inp32(MDP_BASE + 0x90060) & 0x1));
+#ifdef CONFIG_FB_MSM_MDP40
+		MDP_OUTP(MDP_BASE + 0x90064, (alpha << 24));
+		MDP_OUTP(MDP_BASE + 0x90068, (0xffffff & img->bg_color));
+		MDP_OUTP(MDP_BASE + 0x9006C, (0xffffff & img->bg_color));
+#else
+		MDP_OUTP(MDP_BASE + 0x90064,
+			 (alpha << 24) | (0xffffff & img->bg_color));
+		MDP_OUTP(MDP_BASE + 0x90068, 0);
+#endif
+	}
+
+	if ((cursor->enable) && (!cursor_enabled)) {
+		cursor_enabled = 1;
+		MDP_OUTP(MDP_BASE + 0x90060, inp32(MDP_BASE + 0x90060) | 0x1);
+	} else if ((!cursor->enable) && (cursor_enabled)) {
+		cursor_enabled = 0;
+		MDP_OUTP(MDP_BASE + 0x90060,
+			 inp32(MDP_BASE + 0x90060) & (~0x1));
+	}
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp_dma.c b/drivers/staging/msm/mdp_dma.c
new file mode 100644
index 00000000000..639918b143b
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma.c
@@ -0,0 +1,561 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+static uint32 mdp_last_dma2_update_width;
+static uint32 mdp_last_dma2_update_height;
+static uint32 mdp_curr_dma2_update_width;
+static uint32 mdp_curr_dma2_update_height;
+
+ktime_t mdp_dma2_last_update_time = { 0 };
+
+int mdp_lcd_rd_cnt_offset_slow = 20;
+int mdp_lcd_rd_cnt_offset_fast = 20;
+int mdp_vsync_usec_wait_line_too_short = 5;
+uint32 mdp_dma2_update_time_in_usec;
+uint32 mdp_total_vdopkts;
+
+extern u32 msm_fb_debug_enabled;
+extern struct workqueue_struct *mdp_dma_wq;
+
+int vsync_start_y_adjust = 4;
+
+static void mdp_dma2_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	int mddi_dest = FALSE;
+	uint32 outBpp = iBuf->bpp;
+	uint32 dma2_cfg_reg;
+	uint8 *src;
+	uint32 mddi_ld_param;
+	uint16 mddi_vdo_packet_reg;
+	struct msm_fb_panel_data *pdata =
+	    (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+	uint32 ystride = mfd->fbi->fix.line_length;
+
+	dma2_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+	    DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+#ifdef CONFIG_FB_MSM_MDP30
+	/*
+	 * Software workaround:  On 7x25/7x27, the MDP will not
+	 * respond if dma_w is 1 pixel.  Set the update width to
+	 * 2 pixels and adjust the x offset if needed.
+	 */
+	if (iBuf->dma_w == 1) {
+		iBuf->dma_w = 2;
+		if (iBuf->dma_x == (iBuf->ibuf_width - 2))
+			iBuf->dma_x--;
+	}
+#endif
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (outBpp == 4)
+		dma2_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+	if (outBpp == 2)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+	mddi_ld_param = 0;
+	mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+	if ((mfd->panel_info.type == MDDI_PANEL) ||
+	    (mfd->panel_info.type == EXT_MDDI_PANEL)) {
+		dma2_cfg_reg |= DMA_OUT_SEL_MDDI;
+		mddi_dest = TRUE;
+
+		if (mfd->panel_info.type == MDDI_PANEL) {
+			mdp_total_vdopkts++;
+			if (mfd->panel_info.pdest == DISPLAY_1) {
+				dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY;
+				mddi_ld_param = 0;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+				mddi_window_adjust(mfd, iBuf->dma_x,
+						   iBuf->dma_w - 1, iBuf->dma_y,
+						   iBuf->dma_h - 1);
+#endif
+			} else {
+				dma2_cfg_reg |=
+				    DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY;
+				mddi_ld_param = 1;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+				mddi_window_adjust(mfd, iBuf->dma_x,
+						   iBuf->dma_w - 1, iBuf->dma_y,
+						   iBuf->dma_h - 1);
+#endif
+			}
+		} else {
+			dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL;
+			mddi_ld_param = 2;
+		}
+	} else {
+		if (mfd->panel_info.pdest == DISPLAY_1) {
+			dma2_cfg_reg |= DMA_AHBM_LCD_SEL_PRIMARY;
+			outp32(MDP_EBI2_LCD0, mfd->data_port_phys);
+		} else {
+			dma2_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+			outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+		}
+	}
+
+	dma2_cfg_reg |= DMA_DITHER_EN;
+
+	src = (uint8 *) iBuf->buf;
+	/* starting input address */
+	src += iBuf->dma_x * outBpp + iBuf->dma_y * ystride;
+
+	mdp_curr_dma2_update_width = iBuf->dma_w;
+	mdp_curr_dma2_update_height = iBuf->dma_h;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0184,
+			(iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0188, src);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x018C, ystride);
+#else
+	MDP_OUTP(MDP_BASE + 0x90004, (iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_BASE + 0x90008, src);
+	MDP_OUTP(MDP_BASE + 0x9000c, ystride);
+#endif
+
+	if (mfd->panel_info.bpp == 18) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	}
+
+	if (mddi_dest) {
+#ifdef CONFIG_FB_MSM_MDP22
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0194,
+			 (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a0, mddi_ld_param);
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a4,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#else
+		MDP_OUTP(MDP_BASE + 0x90010, (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+		MDP_OUTP(MDP_BASE + 0x00094,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#endif
+	} else {
+		/* setting EBI2 LCDC write window */
+		pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+				iBuf->dma_h);
+	}
+
+	/* dma2 config register */
+#ifdef MDP_HW_VSYNC
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+	if ((mfd->use_mdp_vsync) &&
+	    (mfd->ibuf.vsync_enable) && (mfd->panel_info.lcd.vsync_enable)) {
+		uint32 start_y;
+
+		if (vsync_start_y_adjust <= iBuf->dma_y)
+			start_y = iBuf->dma_y - vsync_start_y_adjust;
+		else
+			start_y =
+			    (mfd->total_lcd_lines - 1) - (vsync_start_y_adjust -
+							  iBuf->dma_y);
+
+		/*
+		 * MDP VSYNC clock must be On by now so, we don't have to
+		 * re-enable it
+		 */
+		MDP_OUTP(MDP_BASE + 0x210, start_y);
+		MDP_OUTP(MDP_BASE + 0x20c, 1);	/* enable prim vsync */
+	} else {
+		MDP_OUTP(MDP_BASE + 0x20c, 0);	/* disable prim vsync */
+	}
+#else
+#ifdef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0180, dma2_cfg_reg);
+#else
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+#endif
+#endif /* MDP_HW_VSYNC */
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+static ktime_t vt = { 0 };
+int mdp_usec_diff_threshold = 100;
+int mdp_expected_usec_wait;
+
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht)
+{
+	struct msm_fb_data_type *mfd = NULL;
+
+	mfd = container_of(ht, struct msm_fb_data_type, dma_hrtimer);
+
+	mdp_pipe_kickoff(MDP_DMA2_TERM, mfd);
+
+	if (msm_fb_debug_enabled) {
+		ktime_t t;
+		int usec_diff;
+		int actual_wait;
+
+		t = ktime_get_real();
+
+		actual_wait =
+		    (t.tv.sec - vt.tv.sec) * 1000000 + (t.tv.nsec -
+							vt.tv.nsec) / 1000;
+		usec_diff = actual_wait - mdp_expected_usec_wait;
+
+		if ((mdp_usec_diff_threshold < usec_diff) || (usec_diff < 0))
+			MSM_FB_DEBUG
+			    ("HRT Diff = %d usec Exp=%d usec  Act=%d usec\n",
+			     usec_diff, mdp_expected_usec_wait, actual_wait);
+	}
+
+	return HRTIMER_NORESTART;
+}
+
+static void mdp_dma_schedule(struct msm_fb_data_type *mfd, uint32 term)
+{
+	/*
+	 * dma2 configure VSYNC block
+	 * vsync supported on Primary LCD only for now
+	 */
+	int32 mdp_lcd_rd_cnt;
+	uint32 usec_wait_time;
+	uint32 start_y;
+
+	/*
+	 * ToDo: if we can move HRT timer callback to workqueue, we can
+	 * move DMA2 power on under mdp_pipe_kickoff().
+	 * This will save a power for hrt time wait.
+	 * However if the latency for context switch (hrt irq -> workqueue)
+	 * is too big, we will miss the vsync timing.
+	 */
+	if (term == MDP_DMA2_TERM)
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	mdp_dma2_update_time_in_usec =
+	    MDP_KTIME2USEC(mdp_dma2_last_update_time);
+
+	if ((!mfd->ibuf.vsync_enable) || (!mfd->panel_info.lcd.vsync_enable)
+	    || (mfd->use_mdp_vsync)) {
+		mdp_pipe_kickoff(term, mfd);
+		return;
+	}
+	/* SW vsync logic starts here */
+
+	/* get current rd counter */
+	mdp_lcd_rd_cnt = mdp_get_lcd_line_counter(mfd);
+	if (mdp_dma2_update_time_in_usec != 0) {
+		uint32 num, den;
+
+		/*
+		 * roi width boundary calculation to know the size of pixel
+		 * width that MDP can send faster or slower than LCD read
+		 * pointer
+		 */
+
+		num = mdp_last_dma2_update_width * mdp_last_dma2_update_height;
+		den =
+		    (((mfd->panel_info.lcd.refx100 * mfd->total_lcd_lines) /
+		      1000) * (mdp_dma2_update_time_in_usec / 100)) / 1000;
+
+		if (den == 0)
+			mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+			    mfd->panel_info.xres + 1;
+		else
+			mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+			    (int)(num / den);
+	}
+
+	if (mfd->vsync_width_boundary[mdp_last_dma2_update_width] >
+	    mdp_curr_dma2_update_width) {
+		/* MDP wrp is faster than LCD rdp */
+		mdp_lcd_rd_cnt += mdp_lcd_rd_cnt_offset_fast;
+	} else {
+		/* MDP wrp is slower than LCD rdp */
+		mdp_lcd_rd_cnt -= mdp_lcd_rd_cnt_offset_slow;
+	}
+
+	if (mdp_lcd_rd_cnt < 0)
+		mdp_lcd_rd_cnt = mfd->total_lcd_lines + mdp_lcd_rd_cnt;
+	else if (mdp_lcd_rd_cnt > mfd->total_lcd_lines)
+		mdp_lcd_rd_cnt = mdp_lcd_rd_cnt - mfd->total_lcd_lines - 1;
+
+	/* get wrt pointer position */
+	start_y = mfd->ibuf.dma_y;
+
+	/* measure line difference between start_y and rd counter */
+	if (start_y > mdp_lcd_rd_cnt) {
+		/*
+		 * *100 for lcd_ref_hzx100 was already multiplied by 100
+		 * *1000000 is for usec conversion
+		 */
+
+		if ((start_y - mdp_lcd_rd_cnt) <=
+		    mdp_vsync_usec_wait_line_too_short)
+			usec_wait_time = 0;
+		else
+			usec_wait_time =
+			    ((start_y -
+			      mdp_lcd_rd_cnt) * 1000000) /
+			    ((mfd->total_lcd_lines *
+			      mfd->panel_info.lcd.refx100) / 100);
+	} else {
+		if ((start_y + (mfd->total_lcd_lines - mdp_lcd_rd_cnt)) <=
+		    mdp_vsync_usec_wait_line_too_short)
+			usec_wait_time = 0;
+		else
+			usec_wait_time =
+			    ((start_y +
+			      (mfd->total_lcd_lines -
+			       mdp_lcd_rd_cnt)) * 1000000) /
+			    ((mfd->total_lcd_lines *
+			      mfd->panel_info.lcd.refx100) / 100);
+	}
+
+	mdp_last_dma2_update_width = mdp_curr_dma2_update_width;
+	mdp_last_dma2_update_height = mdp_curr_dma2_update_height;
+
+	if (usec_wait_time == 0) {
+		mdp_pipe_kickoff(term, mfd);
+	} else {
+		ktime_t wait_time;
+
+		wait_time.tv.sec = 0;
+		wait_time.tv.nsec = usec_wait_time * 1000;
+
+		if (msm_fb_debug_enabled) {
+			vt = ktime_get_real();
+			mdp_expected_usec_wait = usec_wait_time;
+		}
+		hrtimer_start(&mfd->dma_hrtimer, wait_time, HRTIMER_MODE_REL);
+	}
+}
+
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf;
+	uint32 upper_height;
+
+	if (mfd->panel.type == EXT_MDDI_PANEL) {
+		mdp_dma2_update_sub(mfd);
+		return;
+	}
+
+	iBuf = &mfd->ibuf;
+
+	upper_height =
+	    (uint32) mddi_assign_pkt_height((uint16) iBuf->dma_w,
+					    (uint16) iBuf->dma_h, 18);
+
+	if (upper_height >= iBuf->dma_h) {
+		mdp_dma2_update_sub(mfd);
+	} else {
+		MDPIBUF lower_height;
+
+		/* sending the upper region first */
+		lower_height = iBuf->dma_h - upper_height;
+		iBuf->dma_h = upper_height;
+		mdp_dma2_update_sub(mfd);
+
+		/* sending the lower region second */
+		iBuf->dma_h = lower_height;
+		iBuf->dma_y += lower_height;
+		iBuf->vsync_enable = FALSE;
+		mdp_dma2_update_sub(mfd);
+	}
+}
+
+void mdp_dma2_update_sub(struct msm_fb_data_type *mfd)
+#else
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+#endif
+{
+	down(&mfd->dma->mutex);
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		down(&mfd->sem);
+		mfd->ibuf_flushed = TRUE;
+		mdp_dma2_update_lcd(mfd);
+
+		mdp_enable_irq(MDP_DMA2_TERM);
+		mfd->dma->busy = TRUE;
+		INIT_COMPLETION(mfd->dma->comp);
+
+		/* schedule DMA to start */
+		mdp_dma_schedule(mfd, MDP_DMA2_TERM);
+		up(&mfd->sem);
+
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&mfd->dma->comp);
+		mdp_disable_irq(MDP_DMA2_TERM);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+	up(&mfd->dma->mutex);
+}
+
+void mdp_lcd_update_workqueue_handler(struct work_struct *work)
+{
+	struct msm_fb_data_type *mfd = NULL;
+
+	mfd = container_of(work, struct msm_fb_data_type, dma_update_worker);
+	if (mfd)
+		mfd->dma_fnc(mfd);
+}
+
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+			  boolean sync)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+	int bpp = info->var.bits_per_pixel / 8;
+
+	down(&mfd->sem);
+	iBuf = &mfd->ibuf;
+	iBuf->buf = (uint8 *) info->fix.smem_start;
+	iBuf->buf += info->var.xoffset * bpp +
+			info->var.yoffset * info->fix.line_length;
+
+	iBuf->ibuf_width = info->var.xres_virtual;
+	iBuf->bpp = bpp;
+
+	iBuf->vsync_enable = sync;
+
+	if (dirty) {
+		/*
+		 * ToDo: dirty region check inside var.xoffset+xres
+		 * <-> var.yoffset+yres
+		 */
+		iBuf->dma_x = dirty->xoffset % info->var.xres;
+		iBuf->dma_y = dirty->yoffset % info->var.yres;
+		iBuf->dma_w = dirty->width;
+		iBuf->dma_h = dirty->height;
+	} else {
+		iBuf->dma_x = 0;
+		iBuf->dma_y = 0;
+		iBuf->dma_w = info->var.xres;
+		iBuf->dma_h = info->var.yres;
+	}
+	mfd->ibuf_flushed = FALSE;
+	up(&mfd->sem);
+}
+
+void mdp_set_offset_info(struct fb_info *info, uint32 addr, uint32 sync)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+
+	int bpp = info->var.bits_per_pixel / 8;
+
+	down(&mfd->sem);
+	iBuf = &mfd->ibuf;
+	iBuf->ibuf_width = info->var.xres_virtual;
+	iBuf->bpp = bpp;
+	iBuf->vsync_enable = sync;
+	iBuf->dma_x = 0;
+	iBuf->dma_y = 0;
+	iBuf->dma_w = info->var.xres;
+	iBuf->dma_h = info->var.yres;
+	iBuf->buf = (uint8 *) addr;
+
+	mfd->ibuf_flushed = FALSE;
+	up(&mfd->sem);
+}
+
+void mdp_dma_pan_update(struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+
+	iBuf = &mfd->ibuf;
+
+	if (mfd->sw_currently_refreshing) {
+		/* we need to wait for the pending update */
+		mfd->pan_waiting = TRUE;
+		if (!mfd->ibuf_flushed) {
+			wait_for_completion_killable(&mfd->pan_comp);
+		}
+		/* waiting for this update to complete */
+		mfd->pan_waiting = TRUE;
+		wait_for_completion_killable(&mfd->pan_comp);
+	} else
+		mfd->dma_fnc(mfd);
+}
+
+void mdp_refresh_screen(unsigned long data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+	if ((mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+		init_timer(&mfd->refresh_timer);
+		mfd->refresh_timer.function = mdp_refresh_screen;
+		mfd->refresh_timer.data = data;
+
+		if (mfd->dma->busy)
+			/* come back in 1 msec */
+			mfd->refresh_timer.expires = jiffies + (HZ / 1000);
+		else
+			mfd->refresh_timer.expires =
+			    jiffies + mfd->refresh_timer_duration;
+
+		add_timer(&mfd->refresh_timer);
+
+		if (!mfd->dma->busy) {
+			if (!queue_work(mdp_dma_wq, &mfd->dma_update_worker)) {
+				MSM_FB_DEBUG("mdp_dma: can't queue_work! -> \
+			MDP/MDDI/LCD clock speed needs to be increased\n");
+			}
+		}
+	} else {
+		if (!mfd->hw_refresh)
+			complete(&mfd->refresher_comp);
+	}
+}
diff --git a/drivers/staging/msm/mdp_dma_lcdc.c b/drivers/staging/msm/mdp_dma_lcdc.c
new file mode 100644
index 00000000000..b57fa1a0ceb
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_lcdc.c
@@ -0,0 +1,379 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE	0xC0000
+#define DTV_BASE	0xD0000
+#define DMA_E_BASE      0xB0000
+#else
+#define LCDC_BASE	0xE0000
+#endif
+
+#define DMA_P_BASE      0x90000
+
+extern spinlock_t mdp_spin_lock;
+#ifndef CONFIG_FB_MSM_MDP40
+extern uint32 mdp_intr_mask;
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+	int lcdc_width;
+	int lcdc_height;
+	int lcdc_bpp;
+	int lcdc_border_clr;
+	int lcdc_underflow_clr;
+	int lcdc_hsync_skew;
+
+	int hsync_period;
+	int hsync_ctrl;
+	int vsync_period;
+	int display_hctl;
+	int display_v_start;
+	int display_v_end;
+	int active_hctl;
+	int active_h_start;
+	int active_h_end;
+	int active_v_start;
+	int active_v_end;
+	int ctrl_polarity;
+	int h_back_porch;
+	int h_front_porch;
+	int v_back_porch;
+	int v_front_porch;
+	int hsync_pulse_width;
+	int vsync_pulse_width;
+	int hsync_polarity;
+	int vsync_polarity;
+	int data_en_polarity;
+	int hsync_start_x;
+	int hsync_end_x;
+	uint8 *buf;
+	int bpp;
+	uint32 dma2_cfg_reg;
+	struct fb_info *fbi;
+	struct fb_var_screeninfo *var;
+	struct msm_fb_data_type *mfd;
+	uint32 dma_base;
+	uint32 timer_base = LCDC_BASE;
+	uint32 block = MDP_DMA2_BLOCK;
+	int ret;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	var = &fbi->var;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp + fbi->var.yoffset * fbi->fix.line_length;
+
+	dma2_cfg_reg = DMA_PACK_ALIGN_LSB | DMA_DITHER_EN | DMA_OUT_SEL_LCDC;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (bpp == 2)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+	else if (bpp == 3)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB888;
+	else
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888;
+
+	switch (mfd->panel_info.bpp) {
+	case 24:
+		dma2_cfg_reg |= DMA_DSTC0G_8BITS |
+		    DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+		break;
+
+	case 18:
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+		break;
+
+	case 16:
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+		break;
+
+	default:
+		printk(KERN_ERR "mdp lcdc can't support format %d bpp!\n",
+		       mfd->panel_info.bpp);
+		return -ENODEV;
+	}
+
+	/* DMA register config */
+
+	dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL)
+		dma_base = DMA_E_BASE;
+#endif
+
+	/* starting address */
+	MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+	/* active window width and height */
+	MDP_OUTP(MDP_BASE + dma_base + 0x4, ((fbi->var.yres) << 16) |
+						(fbi->var.xres));
+	/* buffer ystride */
+	MDP_OUTP(MDP_BASE + dma_base + 0xc, fbi->fix.line_length);
+	/* x/y coordinate = always 0 for lcdc */
+	MDP_OUTP(MDP_BASE + dma_base + 0x10, 0);
+	/* dma config */
+	MDP_OUTP(MDP_BASE + dma_base, dma2_cfg_reg);
+
+	/*
+	 * LCDC timing setting
+	 */
+	h_back_porch = var->left_margin;
+	h_front_porch = var->right_margin;
+	v_back_porch = var->upper_margin;
+	v_front_porch = var->lower_margin;
+	hsync_pulse_width = var->hsync_len;
+	vsync_pulse_width = var->vsync_len;
+	lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+	lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+	lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+	lcdc_width = mfd->panel_info.xres;
+	lcdc_height = mfd->panel_info.yres;
+	lcdc_bpp = mfd->panel_info.bpp;
+
+	hsync_period =
+	    hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+	hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+	hsync_start_x = hsync_pulse_width + h_back_porch;
+	hsync_end_x = hsync_period - h_front_porch - 1;
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+	vsync_period =
+	    (vsync_pulse_width + v_back_porch + lcdc_height +
+	     v_front_porch) * hsync_period;
+	display_v_start =
+	    (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+	display_v_end =
+	    vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+	if (lcdc_width != var->xres) {
+		active_h_start = hsync_start_x + first_pixel_start_x;
+		active_h_end = active_h_start + var->xres - 1;
+		active_hctl =
+		    ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+	} else {
+		active_hctl = 0;
+	}
+
+	if (lcdc_height != var->yres) {
+		active_v_start =
+		    display_v_start + first_pixel_start_y * hsync_period;
+		active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+		active_v_start |= ACTIVE_START_Y_EN;
+	} else {
+		active_v_start = 0;
+		active_v_end = 0;
+	}
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		block = MDP_DMA_E_BLOCK;
+		timer_base = DTV_BASE;
+		hsync_polarity = 0;
+		vsync_polarity = 0;
+	} else {
+		hsync_polarity = 1;
+		vsync_polarity = 1;
+	}
+
+	lcdc_underflow_clr |= 0x80000000;	/* enable recovery */
+#else
+	hsync_polarity = 0;
+	vsync_polarity = 0;
+#endif
+	data_en_polarity = 0;
+
+	ctrl_polarity =
+	    (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+	MDP_OUTP(MDP_BASE + timer_base + 0x4, hsync_ctrl);
+	MDP_OUTP(MDP_BASE + timer_base + 0x8, vsync_period);
+	MDP_OUTP(MDP_BASE + timer_base + 0xc, vsync_pulse_width * hsync_period);
+	if (timer_base == LCDC_BASE) {
+		MDP_OUTP(MDP_BASE + timer_base + 0x10, display_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x14, display_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x18, display_v_end);
+		MDP_OUTP(MDP_BASE + timer_base + 0x28, lcdc_border_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x2c, lcdc_underflow_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x30, lcdc_hsync_skew);
+		MDP_OUTP(MDP_BASE + timer_base + 0x38, ctrl_polarity);
+		MDP_OUTP(MDP_BASE + timer_base + 0x1c, active_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x20, active_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x24, active_v_end);
+	} else {
+		MDP_OUTP(MDP_BASE + timer_base + 0x18, display_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x1c, display_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x20, display_v_end);
+		MDP_OUTP(MDP_BASE + timer_base + 0x40, lcdc_border_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x44, lcdc_underflow_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x48, lcdc_hsync_skew);
+		MDP_OUTP(MDP_BASE + timer_base + 0x50, ctrl_polarity);
+		MDP_OUTP(MDP_BASE + timer_base + 0x2c, active_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x30, active_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x38, active_v_end);
+	}
+
+	ret = panel_next_on(pdev);
+	if (ret == 0) {
+		/* enable LCDC block */
+		MDP_OUTP(MDP_BASE + timer_base, 1);
+		mdp_pipe_ctrl(block, MDP_BLOCK_POWER_ON, FALSE);
+	}
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+	uint32 timer_base = LCDC_BASE;
+	uint32 block = MDP_DMA2_BLOCK;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		block = MDP_DMA_E_BLOCK;
+		timer_base = DTV_BASE;
+	}
+#endif
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + timer_base, 0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_ctrl(block, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_off(pdev);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	return ret;
+}
+
+void mdp_lcdc_update(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+	uint32 dma_base;
+	int irq_block = MDP_DMA2_TERM;
+#ifdef CONFIG_FB_MSM_MDP40
+	int intr = INTR_DMA_P_DONE;
+#endif
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since it's lcdc mode */
+
+	if (!mfd->ibuf.visible_swapped) {
+		bpp = fbi->var.bits_per_pixel / 8;
+		buf = (uint8 *) fbi->fix.smem_start;
+		buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+	} else {
+		/* we've done something to update the pointer. */
+		bpp =  mfd->ibuf.bpp;
+		buf = mfd->ibuf.buf;
+	}
+
+	dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		intr = INTR_DMA_E_DONE;
+		irq_block = MDP_DMA_E_TERM;
+		dma_base = DMA_E_BASE;
+	}
+#endif
+
+	/* starting address */
+	MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+
+	/* enable LCDC irq */
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(irq_block);
+	INIT_COMPLETION(mfd->dma->comp);
+	mfd->dma->waiting = TRUE;
+#ifdef CONFIG_FB_MSM_MDP40
+	outp32(MDP_INTR_CLEAR, intr);
+	mdp_intr_mask |= intr;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#else
+	outp32(MDP_INTR_CLEAR, LCDC_FRAME_START);
+	mdp_intr_mask |= LCDC_FRAME_START;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#endif
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	if (mfd->ibuf.vsync_enable)
+		wait_for_completion_killable(&mfd->dma->comp);
+	mdp_disable_irq(irq_block);
+}
diff --git a/drivers/staging/msm/mdp_dma_s.c b/drivers/staging/msm/mdp_dma_s.c
new file mode 100644
index 00000000000..0c34a1010f1
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_s.c
@@ -0,0 +1,139 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static void mdp_dma_s_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	int mddi_dest = FALSE;
+	uint32 outBpp = iBuf->bpp;
+	uint32 dma_s_cfg_reg;
+	uint8 *src;
+	struct msm_fb_panel_data *pdata =
+	    (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	dma_s_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+	    DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma_s_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma_s_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (outBpp == 4)
+		dma_s_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+	if (outBpp == 2)
+		dma_s_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+	if (mfd->panel_info.pdest != DISPLAY_2) {
+		printk(KERN_ERR "error: non-secondary type through dma_s!\n");
+		return;
+	}
+
+	if (mfd->panel_info.type == MDDI_PANEL) {
+		dma_s_cfg_reg |= DMA_OUT_SEL_MDDI;
+		mddi_dest = TRUE;
+	} else {
+		dma_s_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+		outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+	}
+
+	dma_s_cfg_reg |= DMA_DITHER_EN;
+
+	src = (uint8 *) iBuf->buf;
+	/* starting input address */
+	src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * outBpp;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	/* PIXELSIZE */
+	MDP_OUTP(MDP_BASE + 0xa0004, (iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_BASE + 0xa0008, src);	/* ibuf address */
+	MDP_OUTP(MDP_BASE + 0xa000c, iBuf->ibuf_width * outBpp);/* ystride */
+
+	if (mfd->panel_info.bpp == 18) {
+		dma_s_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else {
+		dma_s_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	}
+
+	if (mddi_dest) {
+		MDP_OUTP(MDP_BASE + 0xa0010, (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_BASE + 0x00090, 1);
+		MDP_OUTP(MDP_BASE + 0x00094,
+				(MDDI_VDO_PACKET_DESC << 16) |
+				mfd->panel_info.mddi.vdopkt);
+	} else {
+		/* setting LCDC write window */
+		pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+				iBuf->dma_h);
+	}
+
+	MDP_OUTP(MDP_BASE + 0xa0000, dma_s_cfg_reg);
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_kickoff(MDP_DMA_S_TERM, mfd);
+}
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd)
+{
+	down(&mfd->dma->mutex);
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		down(&mfd->sem);
+		mdp_enable_irq(MDP_DMA_S_TERM);
+		mfd->dma->busy = TRUE;
+		INIT_COMPLETION(mfd->dma->comp);
+		mfd->ibuf_flushed = TRUE;
+		mdp_dma_s_update_lcd(mfd);
+		up(&mfd->sem);
+
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&mfd->dma->comp);
+		mdp_disable_irq(MDP_DMA_S_TERM);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+	up(&mfd->dma->mutex);
+}
diff --git a/drivers/staging/msm/mdp_dma_tv.c b/drivers/staging/msm/mdp_dma_tv.c
new file mode 100644
index 00000000000..70989fb32c1
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_tv.c
@@ -0,0 +1,142 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+extern spinlock_t mdp_spin_lock;
+extern uint32 mdp_intr_mask;
+
+int mdp_dma3_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct fb_info *fbi;
+	uint8 *buf;
+	int bpp;
+	int ret = 0;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	/* starting address[31..8] of Video frame buffer is CS0 */
+	MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+	mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	MDP_OUTP(MDP_BASE + 0xC0004, 0x4c60674); /* flicker filter enabled */
+	MDP_OUTP(MDP_BASE + 0xC0010, 0x20);	/* sobel treshold */
+
+	MDP_OUTP(MDP_BASE + 0xC0018, 0xeb0010);	/* Y  Max, Y  min */
+	MDP_OUTP(MDP_BASE + 0xC001C, 0xf00010);	/* Cb Max, Cb min */
+	MDP_OUTP(MDP_BASE + 0xC0020, 0xf00010);	/* Cb Max, Cb min */
+
+	MDP_OUTP(MDP_BASE + 0xC000C, 0x67686970); /* add a few chars for CC */
+	MDP_OUTP(MDP_BASE + 0xC0000, 0x1);	/* MDP tv out enable */
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+int mdp_dma3_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+	if (ret)
+		return ret;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + 0xC0000, 0x0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	return ret;
+}
+
+void mdp_dma3_update(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since dma3 is running */
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+	MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(MDP_DMA3_TERM);
+	INIT_COMPLETION(mfd->dma->comp);
+	mfd->dma->waiting = TRUE;
+
+	outp32(MDP_INTR_CLEAR, TV_OUT_DMA3_START);
+	mdp_intr_mask |= TV_OUT_DMA3_START;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	wait_for_completion_killable(&mfd->dma->comp);
+	mdp_disable_irq(MDP_DMA3_TERM);
+}
diff --git a/drivers/staging/msm/mdp_hw_init.c b/drivers/staging/msm/mdp_hw_init.c
new file mode 100644
index 00000000000..807362ac592
--- /dev/null
+++ b/drivers/staging/msm/mdp_hw_init.c
@@ -0,0 +1,720 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+/* mdp primary csc limit vector */
+uint32 mdp_plv[] = { 0x10, 0xeb, 0x10, 0xf0 };
+
+/* Color Coefficient matrix for YUV -> RGB */
+struct mdp_ccs mdp_ccs_yuv2rgb = {
+	MDP_CCS_YUV2RGB,
+	{
+		0x254,
+		0x000,
+		0x331,
+		0x254,
+		0xff38,
+		0xfe61,
+		0x254,
+		0x409,
+		0x000,
+	},
+	{
+#ifdef CONFIG_FB_MSM_MDP31
+		0x1f0,
+		0x180,
+		0x180
+#else
+		0x10,
+		0x80,
+		0x80
+#endif
+	}
+};
+
+/* Color Coefficient matrix for RGB -> YUV */
+struct mdp_ccs mdp_ccs_rgb2yuv = {
+	MDP_CCS_RGB2YUV,
+	{
+		0x83,
+		0x102,
+		0x32,
+		0xffb5,
+		0xff6c,
+		0xe1,
+		0xe1,
+		0xff45,
+		0xffdc,
+	},
+#ifdef CONFIG_FB_MSM_MDP31
+	{
+		0x10,
+		0x80,
+		0x80
+	}
+#endif
+};
+
+static void mdp_load_lut_param(void)
+{
+	outpdw(MDP_BASE + 0x40800, 0x0);
+	outpdw(MDP_BASE + 0x40804, 0x151515);
+	outpdw(MDP_BASE + 0x40808, 0x1d1d1d);
+	outpdw(MDP_BASE + 0x4080c, 0x232323);
+	outpdw(MDP_BASE + 0x40810, 0x272727);
+	outpdw(MDP_BASE + 0x40814, 0x2b2b2b);
+	outpdw(MDP_BASE + 0x40818, 0x2f2f2f);
+	outpdw(MDP_BASE + 0x4081c, 0x333333);
+	outpdw(MDP_BASE + 0x40820, 0x363636);
+	outpdw(MDP_BASE + 0x40824, 0x393939);
+	outpdw(MDP_BASE + 0x40828, 0x3b3b3b);
+	outpdw(MDP_BASE + 0x4082c, 0x3e3e3e);
+	outpdw(MDP_BASE + 0x40830, 0x404040);
+	outpdw(MDP_BASE + 0x40834, 0x434343);
+	outpdw(MDP_BASE + 0x40838, 0x454545);
+	outpdw(MDP_BASE + 0x4083c, 0x474747);
+	outpdw(MDP_BASE + 0x40840, 0x494949);
+	outpdw(MDP_BASE + 0x40844, 0x4b4b4b);
+	outpdw(MDP_BASE + 0x40848, 0x4d4d4d);
+	outpdw(MDP_BASE + 0x4084c, 0x4f4f4f);
+	outpdw(MDP_BASE + 0x40850, 0x515151);
+	outpdw(MDP_BASE + 0x40854, 0x535353);
+	outpdw(MDP_BASE + 0x40858, 0x555555);
+	outpdw(MDP_BASE + 0x4085c, 0x565656);
+	outpdw(MDP_BASE + 0x40860, 0x585858);
+	outpdw(MDP_BASE + 0x40864, 0x5a5a5a);
+	outpdw(MDP_BASE + 0x40868, 0x5b5b5b);
+	outpdw(MDP_BASE + 0x4086c, 0x5d5d5d);
+	outpdw(MDP_BASE + 0x40870, 0x5e5e5e);
+	outpdw(MDP_BASE + 0x40874, 0x606060);
+	outpdw(MDP_BASE + 0x40878, 0x616161);
+	outpdw(MDP_BASE + 0x4087c, 0x636363);
+	outpdw(MDP_BASE + 0x40880, 0x646464);
+	outpdw(MDP_BASE + 0x40884, 0x666666);
+	outpdw(MDP_BASE + 0x40888, 0x676767);
+	outpdw(MDP_BASE + 0x4088c, 0x686868);
+	outpdw(MDP_BASE + 0x40890, 0x6a6a6a);
+	outpdw(MDP_BASE + 0x40894, 0x6b6b6b);
+	outpdw(MDP_BASE + 0x40898, 0x6c6c6c);
+	outpdw(MDP_BASE + 0x4089c, 0x6e6e6e);
+	outpdw(MDP_BASE + 0x408a0, 0x6f6f6f);
+	outpdw(MDP_BASE + 0x408a4, 0x707070);
+	outpdw(MDP_BASE + 0x408a8, 0x717171);
+	outpdw(MDP_BASE + 0x408ac, 0x727272);
+	outpdw(MDP_BASE + 0x408b0, 0x747474);
+	outpdw(MDP_BASE + 0x408b4, 0x757575);
+	outpdw(MDP_BASE + 0x408b8, 0x767676);
+	outpdw(MDP_BASE + 0x408bc, 0x777777);
+	outpdw(MDP_BASE + 0x408c0, 0x787878);
+	outpdw(MDP_BASE + 0x408c4, 0x797979);
+	outpdw(MDP_BASE + 0x408c8, 0x7a7a7a);
+	outpdw(MDP_BASE + 0x408cc, 0x7c7c7c);
+	outpdw(MDP_BASE + 0x408d0, 0x7d7d7d);
+	outpdw(MDP_BASE + 0x408d4, 0x7e7e7e);
+	outpdw(MDP_BASE + 0x408d8, 0x7f7f7f);
+	outpdw(MDP_BASE + 0x408dc, 0x808080);
+	outpdw(MDP_BASE + 0x408e0, 0x818181);
+	outpdw(MDP_BASE + 0x408e4, 0x828282);
+	outpdw(MDP_BASE + 0x408e8, 0x838383);
+	outpdw(MDP_BASE + 0x408ec, 0x848484);
+	outpdw(MDP_BASE + 0x408f0, 0x858585);
+	outpdw(MDP_BASE + 0x408f4, 0x868686);
+	outpdw(MDP_BASE + 0x408f8, 0x878787);
+	outpdw(MDP_BASE + 0x408fc, 0x888888);
+	outpdw(MDP_BASE + 0x40900, 0x898989);
+	outpdw(MDP_BASE + 0x40904, 0x8a8a8a);
+	outpdw(MDP_BASE + 0x40908, 0x8b8b8b);
+	outpdw(MDP_BASE + 0x4090c, 0x8c8c8c);
+	outpdw(MDP_BASE + 0x40910, 0x8d8d8d);
+	outpdw(MDP_BASE + 0x40914, 0x8e8e8e);
+	outpdw(MDP_BASE + 0x40918, 0x8f8f8f);
+	outpdw(MDP_BASE + 0x4091c, 0x8f8f8f);
+	outpdw(MDP_BASE + 0x40920, 0x909090);
+	outpdw(MDP_BASE + 0x40924, 0x919191);
+	outpdw(MDP_BASE + 0x40928, 0x929292);
+	outpdw(MDP_BASE + 0x4092c, 0x939393);
+	outpdw(MDP_BASE + 0x40930, 0x949494);
+	outpdw(MDP_BASE + 0x40934, 0x959595);
+	outpdw(MDP_BASE + 0x40938, 0x969696);
+	outpdw(MDP_BASE + 0x4093c, 0x969696);
+	outpdw(MDP_BASE + 0x40940, 0x979797);
+	outpdw(MDP_BASE + 0x40944, 0x989898);
+	outpdw(MDP_BASE + 0x40948, 0x999999);
+	outpdw(MDP_BASE + 0x4094c, 0x9a9a9a);
+	outpdw(MDP_BASE + 0x40950, 0x9b9b9b);
+	outpdw(MDP_BASE + 0x40954, 0x9c9c9c);
+	outpdw(MDP_BASE + 0x40958, 0x9c9c9c);
+	outpdw(MDP_BASE + 0x4095c, 0x9d9d9d);
+	outpdw(MDP_BASE + 0x40960, 0x9e9e9e);
+	outpdw(MDP_BASE + 0x40964, 0x9f9f9f);
+	outpdw(MDP_BASE + 0x40968, 0xa0a0a0);
+	outpdw(MDP_BASE + 0x4096c, 0xa0a0a0);
+	outpdw(MDP_BASE + 0x40970, 0xa1a1a1);
+	outpdw(MDP_BASE + 0x40974, 0xa2a2a2);
+	outpdw(MDP_BASE + 0x40978, 0xa3a3a3);
+	outpdw(MDP_BASE + 0x4097c, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40980, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40984, 0xa5a5a5);
+	outpdw(MDP_BASE + 0x40988, 0xa6a6a6);
+	outpdw(MDP_BASE + 0x4098c, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40990, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40994, 0xa8a8a8);
+	outpdw(MDP_BASE + 0x40998, 0xa9a9a9);
+	outpdw(MDP_BASE + 0x4099c, 0xaaaaaa);
+	outpdw(MDP_BASE + 0x409a0, 0xaaaaaa);
+	outpdw(MDP_BASE + 0x409a4, 0xababab);
+	outpdw(MDP_BASE + 0x409a8, 0xacacac);
+	outpdw(MDP_BASE + 0x409ac, 0xadadad);
+	outpdw(MDP_BASE + 0x409b0, 0xadadad);
+	outpdw(MDP_BASE + 0x409b4, 0xaeaeae);
+	outpdw(MDP_BASE + 0x409b8, 0xafafaf);
+	outpdw(MDP_BASE + 0x409bc, 0xafafaf);
+	outpdw(MDP_BASE + 0x409c0, 0xb0b0b0);
+	outpdw(MDP_BASE + 0x409c4, 0xb1b1b1);
+	outpdw(MDP_BASE + 0x409c8, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x409cc, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x409d0, 0xb3b3b3);
+	outpdw(MDP_BASE + 0x409d4, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x409d8, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x409dc, 0xb5b5b5);
+	outpdw(MDP_BASE + 0x409e0, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x409e4, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x409e8, 0xb7b7b7);
+	outpdw(MDP_BASE + 0x409ec, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x409f0, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x409f4, 0xb9b9b9);
+	outpdw(MDP_BASE + 0x409f8, 0xbababa);
+	outpdw(MDP_BASE + 0x409fc, 0xbababa);
+	outpdw(MDP_BASE + 0x40a00, 0xbbbbbb);
+	outpdw(MDP_BASE + 0x40a04, 0xbcbcbc);
+	outpdw(MDP_BASE + 0x40a08, 0xbcbcbc);
+	outpdw(MDP_BASE + 0x40a0c, 0xbdbdbd);
+	outpdw(MDP_BASE + 0x40a10, 0xbebebe);
+	outpdw(MDP_BASE + 0x40a14, 0xbebebe);
+	outpdw(MDP_BASE + 0x40a18, 0xbfbfbf);
+	outpdw(MDP_BASE + 0x40a1c, 0xc0c0c0);
+	outpdw(MDP_BASE + 0x40a20, 0xc0c0c0);
+	outpdw(MDP_BASE + 0x40a24, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40a28, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40a2c, 0xc2c2c2);
+	outpdw(MDP_BASE + 0x40a30, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40a34, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40a38, 0xc4c4c4);
+	outpdw(MDP_BASE + 0x40a3c, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40a40, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40a44, 0xc6c6c6);
+	outpdw(MDP_BASE + 0x40a48, 0xc6c6c6);
+	outpdw(MDP_BASE + 0x40a4c, 0xc7c7c7);
+	outpdw(MDP_BASE + 0x40a50, 0xc8c8c8);
+	outpdw(MDP_BASE + 0x40a54, 0xc8c8c8);
+	outpdw(MDP_BASE + 0x40a58, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40a5c, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40a60, 0xcacaca);
+	outpdw(MDP_BASE + 0x40a64, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40a68, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40a6c, 0xcccccc);
+	outpdw(MDP_BASE + 0x40a70, 0xcccccc);
+	outpdw(MDP_BASE + 0x40a74, 0xcdcdcd);
+	outpdw(MDP_BASE + 0x40a78, 0xcecece);
+	outpdw(MDP_BASE + 0x40a7c, 0xcecece);
+	outpdw(MDP_BASE + 0x40a80, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40a84, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40a88, 0xd0d0d0);
+	outpdw(MDP_BASE + 0x40a8c, 0xd0d0d0);
+	outpdw(MDP_BASE + 0x40a90, 0xd1d1d1);
+	outpdw(MDP_BASE + 0x40a94, 0xd2d2d2);
+	outpdw(MDP_BASE + 0x40a98, 0xd2d2d2);
+	outpdw(MDP_BASE + 0x40a9c, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40aa0, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40aa4, 0xd4d4d4);
+	outpdw(MDP_BASE + 0x40aa8, 0xd4d4d4);
+	outpdw(MDP_BASE + 0x40aac, 0xd5d5d5);
+	outpdw(MDP_BASE + 0x40ab0, 0xd6d6d6);
+	outpdw(MDP_BASE + 0x40ab4, 0xd6d6d6);
+	outpdw(MDP_BASE + 0x40ab8, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40abc, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40ac0, 0xd8d8d8);
+	outpdw(MDP_BASE + 0x40ac4, 0xd8d8d8);
+	outpdw(MDP_BASE + 0x40ac8, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40acc, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40ad0, 0xdadada);
+	outpdw(MDP_BASE + 0x40ad4, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40ad8, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40adc, 0xdcdcdc);
+	outpdw(MDP_BASE + 0x40ae0, 0xdcdcdc);
+	outpdw(MDP_BASE + 0x40ae4, 0xdddddd);
+	outpdw(MDP_BASE + 0x40ae8, 0xdddddd);
+	outpdw(MDP_BASE + 0x40aec, 0xdedede);
+	outpdw(MDP_BASE + 0x40af0, 0xdedede);
+	outpdw(MDP_BASE + 0x40af4, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40af8, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40afc, 0xe0e0e0);
+	outpdw(MDP_BASE + 0x40b00, 0xe0e0e0);
+	outpdw(MDP_BASE + 0x40b04, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40b08, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40b0c, 0xe2e2e2);
+	outpdw(MDP_BASE + 0x40b10, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40b14, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40b18, 0xe4e4e4);
+	outpdw(MDP_BASE + 0x40b1c, 0xe4e4e4);
+	outpdw(MDP_BASE + 0x40b20, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40b24, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40b28, 0xe6e6e6);
+	outpdw(MDP_BASE + 0x40b2c, 0xe6e6e6);
+	outpdw(MDP_BASE + 0x40b30, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40b34, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40b38, 0xe8e8e8);
+	outpdw(MDP_BASE + 0x40b3c, 0xe8e8e8);
+	outpdw(MDP_BASE + 0x40b40, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40b44, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40b48, 0xeaeaea);
+	outpdw(MDP_BASE + 0x40b4c, 0xeaeaea);
+	outpdw(MDP_BASE + 0x40b50, 0xebebeb);
+	outpdw(MDP_BASE + 0x40b54, 0xebebeb);
+	outpdw(MDP_BASE + 0x40b58, 0xececec);
+	outpdw(MDP_BASE + 0x40b5c, 0xececec);
+	outpdw(MDP_BASE + 0x40b60, 0xededed);
+	outpdw(MDP_BASE + 0x40b64, 0xededed);
+	outpdw(MDP_BASE + 0x40b68, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40b6c, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40b70, 0xefefef);
+	outpdw(MDP_BASE + 0x40b74, 0xefefef);
+	outpdw(MDP_BASE + 0x40b78, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40b7c, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40b80, 0xf1f1f1);
+	outpdw(MDP_BASE + 0x40b84, 0xf1f1f1);
+	outpdw(MDP_BASE + 0x40b88, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b8c, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b90, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b94, 0xf3f3f3);
+	outpdw(MDP_BASE + 0x40b98, 0xf3f3f3);
+	outpdw(MDP_BASE + 0x40b9c, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40ba0, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40ba4, 0xf5f5f5);
+	outpdw(MDP_BASE + 0x40ba8, 0xf5f5f5);
+	outpdw(MDP_BASE + 0x40bac, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40bb0, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40bb4, 0xf7f7f7);
+	outpdw(MDP_BASE + 0x40bb8, 0xf7f7f7);
+	outpdw(MDP_BASE + 0x40bbc, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40bc0, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40bc4, 0xf9f9f9);
+	outpdw(MDP_BASE + 0x40bc8, 0xf9f9f9);
+	outpdw(MDP_BASE + 0x40bcc, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd0, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd4, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd8, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40bdc, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40be0, 0xfcfcfc);
+	outpdw(MDP_BASE + 0x40be4, 0xfcfcfc);
+	outpdw(MDP_BASE + 0x40be8, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40bec, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40bf0, 0xfefefe);
+	outpdw(MDP_BASE + 0x40bf4, 0xfefefe);
+	outpdw(MDP_BASE + 0x40bf8, 0xffffff);
+	outpdw(MDP_BASE + 0x40bfc, 0xffffff);
+	outpdw(MDP_BASE + 0x40c00, 0x0);
+	outpdw(MDP_BASE + 0x40c04, 0x0);
+	outpdw(MDP_BASE + 0x40c08, 0x0);
+	outpdw(MDP_BASE + 0x40c0c, 0x0);
+	outpdw(MDP_BASE + 0x40c10, 0x0);
+	outpdw(MDP_BASE + 0x40c14, 0x0);
+	outpdw(MDP_BASE + 0x40c18, 0x0);
+	outpdw(MDP_BASE + 0x40c1c, 0x0);
+	outpdw(MDP_BASE + 0x40c20, 0x0);
+	outpdw(MDP_BASE + 0x40c24, 0x0);
+	outpdw(MDP_BASE + 0x40c28, 0x0);
+	outpdw(MDP_BASE + 0x40c2c, 0x0);
+	outpdw(MDP_BASE + 0x40c30, 0x0);
+	outpdw(MDP_BASE + 0x40c34, 0x0);
+	outpdw(MDP_BASE + 0x40c38, 0x0);
+	outpdw(MDP_BASE + 0x40c3c, 0x0);
+	outpdw(MDP_BASE + 0x40c40, 0x10101);
+	outpdw(MDP_BASE + 0x40c44, 0x10101);
+	outpdw(MDP_BASE + 0x40c48, 0x10101);
+	outpdw(MDP_BASE + 0x40c4c, 0x10101);
+	outpdw(MDP_BASE + 0x40c50, 0x10101);
+	outpdw(MDP_BASE + 0x40c54, 0x10101);
+	outpdw(MDP_BASE + 0x40c58, 0x10101);
+	outpdw(MDP_BASE + 0x40c5c, 0x10101);
+	outpdw(MDP_BASE + 0x40c60, 0x10101);
+	outpdw(MDP_BASE + 0x40c64, 0x10101);
+	outpdw(MDP_BASE + 0x40c68, 0x20202);
+	outpdw(MDP_BASE + 0x40c6c, 0x20202);
+	outpdw(MDP_BASE + 0x40c70, 0x20202);
+	outpdw(MDP_BASE + 0x40c74, 0x20202);
+	outpdw(MDP_BASE + 0x40c78, 0x20202);
+	outpdw(MDP_BASE + 0x40c7c, 0x20202);
+	outpdw(MDP_BASE + 0x40c80, 0x30303);
+	outpdw(MDP_BASE + 0x40c84, 0x30303);
+	outpdw(MDP_BASE + 0x40c88, 0x30303);
+	outpdw(MDP_BASE + 0x40c8c, 0x30303);
+	outpdw(MDP_BASE + 0x40c90, 0x30303);
+	outpdw(MDP_BASE + 0x40c94, 0x40404);
+	outpdw(MDP_BASE + 0x40c98, 0x40404);
+	outpdw(MDP_BASE + 0x40c9c, 0x40404);
+	outpdw(MDP_BASE + 0x40ca0, 0x40404);
+	outpdw(MDP_BASE + 0x40ca4, 0x40404);
+	outpdw(MDP_BASE + 0x40ca8, 0x50505);
+	outpdw(MDP_BASE + 0x40cac, 0x50505);
+	outpdw(MDP_BASE + 0x40cb0, 0x50505);
+	outpdw(MDP_BASE + 0x40cb4, 0x50505);
+	outpdw(MDP_BASE + 0x40cb8, 0x60606);
+	outpdw(MDP_BASE + 0x40cbc, 0x60606);
+	outpdw(MDP_BASE + 0x40cc0, 0x60606);
+	outpdw(MDP_BASE + 0x40cc4, 0x70707);
+	outpdw(MDP_BASE + 0x40cc8, 0x70707);
+	outpdw(MDP_BASE + 0x40ccc, 0x70707);
+	outpdw(MDP_BASE + 0x40cd0, 0x70707);
+	outpdw(MDP_BASE + 0x40cd4, 0x80808);
+	outpdw(MDP_BASE + 0x40cd8, 0x80808);
+	outpdw(MDP_BASE + 0x40cdc, 0x80808);
+	outpdw(MDP_BASE + 0x40ce0, 0x90909);
+	outpdw(MDP_BASE + 0x40ce4, 0x90909);
+	outpdw(MDP_BASE + 0x40ce8, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cec, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cf0, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cf4, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40cf8, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40cfc, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40d00, 0xc0c0c);
+	outpdw(MDP_BASE + 0x40d04, 0xc0c0c);
+	outpdw(MDP_BASE + 0x40d08, 0xd0d0d);
+	outpdw(MDP_BASE + 0x40d0c, 0xd0d0d);
+	outpdw(MDP_BASE + 0x40d10, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d14, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d18, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d1c, 0xf0f0f);
+	outpdw(MDP_BASE + 0x40d20, 0xf0f0f);
+	outpdw(MDP_BASE + 0x40d24, 0x101010);
+	outpdw(MDP_BASE + 0x40d28, 0x101010);
+	outpdw(MDP_BASE + 0x40d2c, 0x111111);
+	outpdw(MDP_BASE + 0x40d30, 0x111111);
+	outpdw(MDP_BASE + 0x40d34, 0x121212);
+	outpdw(MDP_BASE + 0x40d38, 0x121212);
+	outpdw(MDP_BASE + 0x40d3c, 0x131313);
+	outpdw(MDP_BASE + 0x40d40, 0x131313);
+	outpdw(MDP_BASE + 0x40d44, 0x141414);
+	outpdw(MDP_BASE + 0x40d48, 0x151515);
+	outpdw(MDP_BASE + 0x40d4c, 0x151515);
+	outpdw(MDP_BASE + 0x40d50, 0x161616);
+	outpdw(MDP_BASE + 0x40d54, 0x161616);
+	outpdw(MDP_BASE + 0x40d58, 0x171717);
+	outpdw(MDP_BASE + 0x40d5c, 0x171717);
+	outpdw(MDP_BASE + 0x40d60, 0x181818);
+	outpdw(MDP_BASE + 0x40d64, 0x191919);
+	outpdw(MDP_BASE + 0x40d68, 0x191919);
+	outpdw(MDP_BASE + 0x40d6c, 0x1a1a1a);
+	outpdw(MDP_BASE + 0x40d70, 0x1b1b1b);
+	outpdw(MDP_BASE + 0x40d74, 0x1b1b1b);
+	outpdw(MDP_BASE + 0x40d78, 0x1c1c1c);
+	outpdw(MDP_BASE + 0x40d7c, 0x1c1c1c);
+	outpdw(MDP_BASE + 0x40d80, 0x1d1d1d);
+	outpdw(MDP_BASE + 0x40d84, 0x1e1e1e);
+	outpdw(MDP_BASE + 0x40d88, 0x1f1f1f);
+	outpdw(MDP_BASE + 0x40d8c, 0x1f1f1f);
+	outpdw(MDP_BASE + 0x40d90, 0x202020);
+	outpdw(MDP_BASE + 0x40d94, 0x212121);
+	outpdw(MDP_BASE + 0x40d98, 0x212121);
+	outpdw(MDP_BASE + 0x40d9c, 0x222222);
+	outpdw(MDP_BASE + 0x40da0, 0x232323);
+	outpdw(MDP_BASE + 0x40da4, 0x242424);
+	outpdw(MDP_BASE + 0x40da8, 0x242424);
+	outpdw(MDP_BASE + 0x40dac, 0x252525);
+	outpdw(MDP_BASE + 0x40db0, 0x262626);
+	outpdw(MDP_BASE + 0x40db4, 0x272727);
+	outpdw(MDP_BASE + 0x40db8, 0x272727);
+	outpdw(MDP_BASE + 0x40dbc, 0x282828);
+	outpdw(MDP_BASE + 0x40dc0, 0x292929);
+	outpdw(MDP_BASE + 0x40dc4, 0x2a2a2a);
+	outpdw(MDP_BASE + 0x40dc8, 0x2b2b2b);
+	outpdw(MDP_BASE + 0x40dcc, 0x2c2c2c);
+	outpdw(MDP_BASE + 0x40dd0, 0x2c2c2c);
+	outpdw(MDP_BASE + 0x40dd4, 0x2d2d2d);
+	outpdw(MDP_BASE + 0x40dd8, 0x2e2e2e);
+	outpdw(MDP_BASE + 0x40ddc, 0x2f2f2f);
+	outpdw(MDP_BASE + 0x40de0, 0x303030);
+	outpdw(MDP_BASE + 0x40de4, 0x313131);
+	outpdw(MDP_BASE + 0x40de8, 0x323232);
+	outpdw(MDP_BASE + 0x40dec, 0x333333);
+	outpdw(MDP_BASE + 0x40df0, 0x333333);
+	outpdw(MDP_BASE + 0x40df4, 0x343434);
+	outpdw(MDP_BASE + 0x40df8, 0x353535);
+	outpdw(MDP_BASE + 0x40dfc, 0x363636);
+	outpdw(MDP_BASE + 0x40e00, 0x373737);
+	outpdw(MDP_BASE + 0x40e04, 0x383838);
+	outpdw(MDP_BASE + 0x40e08, 0x393939);
+	outpdw(MDP_BASE + 0x40e0c, 0x3a3a3a);
+	outpdw(MDP_BASE + 0x40e10, 0x3b3b3b);
+	outpdw(MDP_BASE + 0x40e14, 0x3c3c3c);
+	outpdw(MDP_BASE + 0x40e18, 0x3d3d3d);
+	outpdw(MDP_BASE + 0x40e1c, 0x3e3e3e);
+	outpdw(MDP_BASE + 0x40e20, 0x3f3f3f);
+	outpdw(MDP_BASE + 0x40e24, 0x404040);
+	outpdw(MDP_BASE + 0x40e28, 0x414141);
+	outpdw(MDP_BASE + 0x40e2c, 0x424242);
+	outpdw(MDP_BASE + 0x40e30, 0x434343);
+	outpdw(MDP_BASE + 0x40e34, 0x444444);
+	outpdw(MDP_BASE + 0x40e38, 0x464646);
+	outpdw(MDP_BASE + 0x40e3c, 0x474747);
+	outpdw(MDP_BASE + 0x40e40, 0x484848);
+	outpdw(MDP_BASE + 0x40e44, 0x494949);
+	outpdw(MDP_BASE + 0x40e48, 0x4a4a4a);
+	outpdw(MDP_BASE + 0x40e4c, 0x4b4b4b);
+	outpdw(MDP_BASE + 0x40e50, 0x4c4c4c);
+	outpdw(MDP_BASE + 0x40e54, 0x4d4d4d);
+	outpdw(MDP_BASE + 0x40e58, 0x4f4f4f);
+	outpdw(MDP_BASE + 0x40e5c, 0x505050);
+	outpdw(MDP_BASE + 0x40e60, 0x515151);
+	outpdw(MDP_BASE + 0x40e64, 0x525252);
+	outpdw(MDP_BASE + 0x40e68, 0x535353);
+	outpdw(MDP_BASE + 0x40e6c, 0x545454);
+	outpdw(MDP_BASE + 0x40e70, 0x565656);
+	outpdw(MDP_BASE + 0x40e74, 0x575757);
+	outpdw(MDP_BASE + 0x40e78, 0x585858);
+	outpdw(MDP_BASE + 0x40e7c, 0x595959);
+	outpdw(MDP_BASE + 0x40e80, 0x5b5b5b);
+	outpdw(MDP_BASE + 0x40e84, 0x5c5c5c);
+	outpdw(MDP_BASE + 0x40e88, 0x5d5d5d);
+	outpdw(MDP_BASE + 0x40e8c, 0x5e5e5e);
+	outpdw(MDP_BASE + 0x40e90, 0x606060);
+	outpdw(MDP_BASE + 0x40e94, 0x616161);
+	outpdw(MDP_BASE + 0x40e98, 0x626262);
+	outpdw(MDP_BASE + 0x40e9c, 0x646464);
+	outpdw(MDP_BASE + 0x40ea0, 0x656565);
+	outpdw(MDP_BASE + 0x40ea4, 0x666666);
+	outpdw(MDP_BASE + 0x40ea8, 0x686868);
+	outpdw(MDP_BASE + 0x40eac, 0x696969);
+	outpdw(MDP_BASE + 0x40eb0, 0x6a6a6a);
+	outpdw(MDP_BASE + 0x40eb4, 0x6c6c6c);
+	outpdw(MDP_BASE + 0x40eb8, 0x6d6d6d);
+	outpdw(MDP_BASE + 0x40ebc, 0x6f6f6f);
+	outpdw(MDP_BASE + 0x40ec0, 0x707070);
+	outpdw(MDP_BASE + 0x40ec4, 0x717171);
+	outpdw(MDP_BASE + 0x40ec8, 0x737373);
+	outpdw(MDP_BASE + 0x40ecc, 0x747474);
+	outpdw(MDP_BASE + 0x40ed0, 0x767676);
+	outpdw(MDP_BASE + 0x40ed4, 0x777777);
+	outpdw(MDP_BASE + 0x40ed8, 0x797979);
+	outpdw(MDP_BASE + 0x40edc, 0x7a7a7a);
+	outpdw(MDP_BASE + 0x40ee0, 0x7c7c7c);
+	outpdw(MDP_BASE + 0x40ee4, 0x7d7d7d);
+	outpdw(MDP_BASE + 0x40ee8, 0x7f7f7f);
+	outpdw(MDP_BASE + 0x40eec, 0x808080);
+	outpdw(MDP_BASE + 0x40ef0, 0x828282);
+	outpdw(MDP_BASE + 0x40ef4, 0x838383);
+	outpdw(MDP_BASE + 0x40ef8, 0x858585);
+	outpdw(MDP_BASE + 0x40efc, 0x868686);
+	outpdw(MDP_BASE + 0x40f00, 0x888888);
+	outpdw(MDP_BASE + 0x40f04, 0x898989);
+	outpdw(MDP_BASE + 0x40f08, 0x8b8b8b);
+	outpdw(MDP_BASE + 0x40f0c, 0x8d8d8d);
+	outpdw(MDP_BASE + 0x40f10, 0x8e8e8e);
+	outpdw(MDP_BASE + 0x40f14, 0x909090);
+	outpdw(MDP_BASE + 0x40f18, 0x919191);
+	outpdw(MDP_BASE + 0x40f1c, 0x939393);
+	outpdw(MDP_BASE + 0x40f20, 0x959595);
+	outpdw(MDP_BASE + 0x40f24, 0x969696);
+	outpdw(MDP_BASE + 0x40f28, 0x989898);
+	outpdw(MDP_BASE + 0x40f2c, 0x9a9a9a);
+	outpdw(MDP_BASE + 0x40f30, 0x9b9b9b);
+	outpdw(MDP_BASE + 0x40f34, 0x9d9d9d);
+	outpdw(MDP_BASE + 0x40f38, 0x9f9f9f);
+	outpdw(MDP_BASE + 0x40f3c, 0xa1a1a1);
+	outpdw(MDP_BASE + 0x40f40, 0xa2a2a2);
+	outpdw(MDP_BASE + 0x40f44, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40f48, 0xa6a6a6);
+	outpdw(MDP_BASE + 0x40f4c, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40f50, 0xa9a9a9);
+	outpdw(MDP_BASE + 0x40f54, 0xababab);
+	outpdw(MDP_BASE + 0x40f58, 0xadadad);
+	outpdw(MDP_BASE + 0x40f5c, 0xafafaf);
+	outpdw(MDP_BASE + 0x40f60, 0xb0b0b0);
+	outpdw(MDP_BASE + 0x40f64, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x40f68, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x40f6c, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x40f70, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x40f74, 0xbababa);
+	outpdw(MDP_BASE + 0x40f78, 0xbbbbbb);
+	outpdw(MDP_BASE + 0x40f7c, 0xbdbdbd);
+	outpdw(MDP_BASE + 0x40f80, 0xbfbfbf);
+	outpdw(MDP_BASE + 0x40f84, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40f88, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40f8c, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40f90, 0xc7c7c7);
+	outpdw(MDP_BASE + 0x40f94, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40f98, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40f9c, 0xcdcdcd);
+	outpdw(MDP_BASE + 0x40fa0, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40fa4, 0xd1d1d1);
+	outpdw(MDP_BASE + 0x40fa8, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40fac, 0xd5d5d5);
+	outpdw(MDP_BASE + 0x40fb0, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40fb4, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40fb8, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40fbc, 0xdddddd);
+	outpdw(MDP_BASE + 0x40fc0, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40fc4, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40fc8, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40fcc, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40fd0, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40fd4, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40fd8, 0xebebeb);
+	outpdw(MDP_BASE + 0x40fdc, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40fe0, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40fe4, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40fe8, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40fec, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40ff0, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40ff4, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40ff8, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40ffc, 0xffffff);
+}
+
+#define   IRQ_EN_1__MDP_IRQ___M    0x00000800
+
+void mdp_hw_init(void)
+{
+	int i;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	/* debug interface write access */
+	outpdw(MDP_BASE + 0x60, 1);
+
+	outp32(MDP_INTR_ENABLE, MDP_ANY_INTR_MASK);
+	outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+	outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01f8, 0x0);
+	outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01fc, 0x0);
+	outpdw(MDP_BASE + 0x60, 0x1);
+	mdp_load_lut_param();
+
+	/*
+	 * clear up unused fg/main registers
+	 */
+	/* comp.plane 2&3 ystride */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0120, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x012c, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0130, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0134, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0158, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x15c, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0160, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0170, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0174, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x017c, 0x0);
+
+	/* comp.plane 2 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0114, 0x0);
+	/* comp.plane 3 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0118, 0x0);
+
+	/* clear up unused bg registers */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c8, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d0, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01dc, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e0, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e4, 0);
+
+#ifndef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_BASE + 0xE0000, 0);
+	MDP_OUTP(MDP_BASE + 0x100, 0xffffffff);
+	MDP_OUTP(MDP_BASE + 0x90070, 0);
+	MDP_OUTP(MDP_BASE + 0x94010, 1);
+	MDP_OUTP(MDP_BASE + 0x9401c, 2);
+#endif
+
+	/*
+	 * limit vector
+	 * pre gets applied before color matrix conversion
+	 * post is after ccs
+	 */
+	writel(mdp_plv[0], MDP_CSC_PRE_LV1n(0));
+	writel(mdp_plv[1], MDP_CSC_PRE_LV1n(1));
+	writel(mdp_plv[2], MDP_CSC_PRE_LV1n(2));
+	writel(mdp_plv[3], MDP_CSC_PRE_LV1n(3));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	writel(mdp_plv[2], MDP_CSC_PRE_LV1n(4));
+	writel(mdp_plv[3], MDP_CSC_PRE_LV1n(5));
+
+	writel(0, MDP_CSC_POST_LV1n(0));
+	writel(0xff, MDP_CSC_POST_LV1n(1));
+	writel(0, MDP_CSC_POST_LV1n(2));
+	writel(0xff, MDP_CSC_POST_LV1n(3));
+	writel(0, MDP_CSC_POST_LV1n(4));
+	writel(0xff, MDP_CSC_POST_LV1n(5));
+
+	writel(0, MDP_CSC_PRE_LV2n(0));
+	writel(0xff, MDP_CSC_PRE_LV2n(1));
+	writel(0, MDP_CSC_PRE_LV2n(2));
+	writel(0xff, MDP_CSC_PRE_LV2n(3));
+	writel(0, MDP_CSC_PRE_LV2n(4));
+	writel(0xff, MDP_CSC_PRE_LV2n(5));
+
+	writel(mdp_plv[0], MDP_CSC_POST_LV2n(0));
+	writel(mdp_plv[1], MDP_CSC_POST_LV2n(1));
+	writel(mdp_plv[2], MDP_CSC_POST_LV2n(2));
+	writel(mdp_plv[3], MDP_CSC_POST_LV2n(3));
+	writel(mdp_plv[2], MDP_CSC_POST_LV2n(4));
+	writel(mdp_plv[3], MDP_CSC_POST_LV2n(5));
+#endif
+
+	/* primary forward matrix */
+	for (i = 0; i < MDP_CCS_SIZE; i++)
+		writel(mdp_ccs_rgb2yuv.ccs[i], MDP_CSC_PFMVn(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	for (i = 0; i < MDP_BV_SIZE; i++)
+		writel(mdp_ccs_rgb2yuv.bv[i], MDP_CSC_POST_BV2n(i));
+
+	writel(0, MDP_CSC_PRE_BV2n(0));
+	writel(0, MDP_CSC_PRE_BV2n(1));
+	writel(0, MDP_CSC_PRE_BV2n(2));
+#endif
+	/* primary reverse matrix */
+	for (i = 0; i < MDP_CCS_SIZE; i++)
+		writel(mdp_ccs_yuv2rgb.ccs[i], MDP_CSC_PRMVn(i));
+
+	for (i = 0; i < MDP_BV_SIZE; i++)
+		writel(mdp_ccs_yuv2rgb.bv[i], MDP_CSC_PRE_BV1n(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	writel(0, MDP_CSC_POST_BV1n(0));
+	writel(0, MDP_CSC_POST_BV1n(1));
+	writel(0, MDP_CSC_POST_BV1n(2));
+
+	outpdw(MDP_BASE + 0x30010, 0x03e0);
+	outpdw(MDP_BASE + 0x30014, 0x0360);
+	outpdw(MDP_BASE + 0x30018, 0x0120);
+	outpdw(MDP_BASE + 0x3001c, 0x0140);
+#endif
+	mdp_init_scale_table();
+
+#ifndef CONFIG_FB_MSM_MDP31
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0104,
+		 ((16 << 6) << 16) | (16) << 6);
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
\ No newline at end of file
diff --git a/drivers/staging/msm/mdp_ppp.c b/drivers/staging/msm/mdp_ppp.c
new file mode 100644
index 00000000000..c35a6aebca1
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp.c
@@ -0,0 +1,1502 @@
+/* drivers/video/msm/src/drv/mdp/mdp_ppp.c
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include <linux/major.h>
+
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_IS_IMGTYPE_BAD(x) (((x) >= MDP_IMGTYPE_LIMIT) && \
+				(((x) < MDP_IMGTYPE2_START) || \
+				 ((x) >= MDP_IMGTYPE_LIMIT2)))
+
+static uint32_t bytes_per_pixel[] = {
+	[MDP_RGB_565] = 2,
+	[MDP_RGB_888] = 3,
+	[MDP_XRGB_8888] = 4,
+	[MDP_ARGB_8888] = 4,
+	[MDP_RGBA_8888] = 4,
+	[MDP_BGRA_8888] = 4,
+	[MDP_Y_CBCR_H2V1] = 1,
+	[MDP_Y_CBCR_H2V2] = 1,
+	[MDP_Y_CRCB_H2V1] = 1,
+	[MDP_Y_CRCB_H2V2] = 1,
+	[MDP_YCRYCB_H2V1] = 2,
+	[MDP_BGR_565] = 2
+};
+
+extern uint32 mdp_plv[];
+extern struct semaphore mdp_ppp_mutex;
+
+uint32_t mdp_get_bytes_per_pixel(uint32_t format)
+{
+	uint32_t bpp = 0;
+	if (format < ARRAY_SIZE(bytes_per_pixel))
+		bpp = bytes_per_pixel[format];
+
+	BUG_ON(!bpp);
+	return bpp;
+}
+
+static uint32 mdp_conv_matx_rgb2yuv(uint32 input_pixel,
+				    uint16 *matrix_and_bias_vector,
+				    uint32 *clamp_vector,
+				    uint32 *look_up_table)
+{
+	uint8 input_C2, input_C0, input_C1;
+	uint32 output;
+	int32 comp_C2, comp_C1, comp_C0, temp;
+	int32 temp1, temp2, temp3;
+	int32 matrix[9];
+	int32 bias_vector[3];
+	int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+	int32 i;
+	uint32 _is_lookup_table_enabled;
+
+	input_C2 = (input_pixel >> 16) & 0xFF;
+	input_C1 = (input_pixel >> 8) & 0xFF;
+	input_C0 = (input_pixel >> 0) & 0xFF;
+
+	comp_C0 = input_C0;
+	comp_C1 = input_C1;
+	comp_C2 = input_C2;
+
+	for (i = 0; i < 9; i++)
+		matrix[i] =
+		    ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+	bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+	bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+	bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+	Y_low_limit = (int32) clamp_vector[0];
+	Y_high_limit = (int32) clamp_vector[1];
+	C_low_limit = (int32) clamp_vector[2];
+	C_high_limit = (int32) clamp_vector[3];
+
+	if (look_up_table == 0)	/* check for NULL point */
+		_is_lookup_table_enabled = 0;
+	else
+		_is_lookup_table_enabled = 1;
+
+	if (_is_lookup_table_enabled == 1) {
+		comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+		comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+		comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+	}
+	/*
+	 * Color Conversion
+	 * reorder input colors
+	 */
+	temp = comp_C2;
+	comp_C2 = comp_C1;
+	comp_C1 = comp_C0;
+	comp_C0 = temp;
+
+	/* matrix multiplication */
+	temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+	temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+	temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+	comp_C0 = temp1 + 0x100;
+	comp_C1 = temp2 + 0x100;
+	comp_C2 = temp3 + 0x100;
+
+	/* take interger part */
+	comp_C0 >>= 9;
+	comp_C1 >>= 9;
+	comp_C2 >>= 9;
+
+	/* post bias (+) */
+	comp_C0 += bias_vector[0];
+	comp_C1 += bias_vector[1];
+	comp_C2 += bias_vector[2];
+
+	/* limit pixel to 8-bit */
+	if (comp_C0 < 0)
+		comp_C0 = 0;
+
+	if (comp_C0 > 255)
+		comp_C0 = 255;
+
+	if (comp_C1 < 0)
+		comp_C1 = 0;
+
+	if (comp_C1 > 255)
+		comp_C1 = 255;
+
+	if (comp_C2 < 0)
+		comp_C2 = 0;
+
+	if (comp_C2 > 255)
+		comp_C2 = 255;
+
+	/* clamp */
+	if (comp_C0 < Y_low_limit)
+		comp_C0 = Y_low_limit;
+
+	if (comp_C0 > Y_high_limit)
+		comp_C0 = Y_high_limit;
+
+	if (comp_C1 < C_low_limit)
+		comp_C1 = C_low_limit;
+
+	if (comp_C1 > C_high_limit)
+		comp_C1 = C_high_limit;
+
+	if (comp_C2 < C_low_limit)
+		comp_C2 = C_low_limit;
+
+	if (comp_C2 > C_high_limit)
+		comp_C2 = C_high_limit;
+
+	output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+	return output;
+}
+
+uint32 mdp_conv_matx_yuv2rgb(uint32 input_pixel,
+			     uint16 *matrix_and_bias_vector,
+			     uint32 *clamp_vector, uint32 *look_up_table)
+{
+	uint8 input_C2, input_C0, input_C1;
+	uint32 output;
+	int32 comp_C2, comp_C1, comp_C0, temp;
+	int32 temp1, temp2, temp3;
+	int32 matrix[9];
+	int32 bias_vector[3];
+	int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+	int32 i;
+	uint32 _is_lookup_table_enabled;
+
+	input_C2 = (input_pixel >> 16) & 0xFF;
+	input_C1 = (input_pixel >> 8) & 0xFF;
+	input_C0 = (input_pixel >> 0) & 0xFF;
+
+	comp_C0 = input_C0;
+	comp_C1 = input_C1;
+	comp_C2 = input_C2;
+
+	for (i = 0; i < 9; i++)
+		matrix[i] =
+		    ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+	bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+	bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+	bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+	Y_low_limit = (int32) clamp_vector[0];
+	Y_high_limit = (int32) clamp_vector[1];
+	C_low_limit = (int32) clamp_vector[2];
+	C_high_limit = (int32) clamp_vector[3];
+
+	if (look_up_table == 0)	/* check for NULL point */
+		_is_lookup_table_enabled = 0;
+	else
+		_is_lookup_table_enabled = 1;
+
+	/* clamp */
+	if (comp_C0 < Y_low_limit)
+		comp_C0 = Y_low_limit;
+
+	if (comp_C0 > Y_high_limit)
+		comp_C0 = Y_high_limit;
+
+	if (comp_C1 < C_low_limit)
+		comp_C1 = C_low_limit;
+
+	if (comp_C1 > C_high_limit)
+		comp_C1 = C_high_limit;
+
+	if (comp_C2 < C_low_limit)
+		comp_C2 = C_low_limit;
+
+	if (comp_C2 > C_high_limit)
+		comp_C2 = C_high_limit;
+
+	/*
+	 * Color Conversion
+	 * pre bias (-)
+	 */
+	comp_C0 -= bias_vector[0];
+	comp_C1 -= bias_vector[1];
+	comp_C2 -= bias_vector[2];
+
+	/* matrix multiplication */
+	temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+	temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+	temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+	comp_C0 = temp1 + 0x100;
+	comp_C1 = temp2 + 0x100;
+	comp_C2 = temp3 + 0x100;
+
+	/* take interger part */
+	comp_C0 >>= 9;
+	comp_C1 >>= 9;
+	comp_C2 >>= 9;
+
+	/* reorder output colors */
+	temp = comp_C0;
+	comp_C0 = comp_C1;
+	comp_C1 = comp_C2;
+	comp_C2 = temp;
+
+	/* limit pixel to 8-bit */
+	if (comp_C0 < 0)
+		comp_C0 = 0;
+
+	if (comp_C0 > 255)
+		comp_C0 = 255;
+
+	if (comp_C1 < 0)
+		comp_C1 = 0;
+
+	if (comp_C1 > 255)
+		comp_C1 = 255;
+
+	if (comp_C2 < 0)
+		comp_C2 = 0;
+
+	if (comp_C2 > 255)
+		comp_C2 = 255;
+
+	/* Look-up table */
+	if (_is_lookup_table_enabled == 1) {
+		comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+		comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+		comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+	}
+
+	output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+	return output;
+}
+
+static uint32 mdp_calc_tpval(MDPIMG *mdpImg)
+{
+	uint32 tpVal;
+	uint8 plane_tp;
+
+	tpVal = 0;
+	if ((mdpImg->imgType == MDP_RGB_565)
+	    || (mdpImg->imgType == MDP_BGR_565)) {
+		/*
+		 * transparent color conversion into 24 bpp
+		 *
+		 * C2R_8BIT
+		 * left shift the entire bit and or it with the upper most bits
+		 */
+		plane_tp = (uint8) ((mdpImg->tpVal & 0xF800) >> 11);
+		tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 16;
+
+		/* C1B_8BIT */
+		plane_tp = (uint8) (mdpImg->tpVal & 0x1F);
+		tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 8;
+
+		/* C0G_8BIT */
+		plane_tp = (uint8) ((mdpImg->tpVal & 0x7E0) >> 5);
+		tpVal |= ((plane_tp << 2) | ((plane_tp & 0x30) >> 4));
+	} else {
+		/* 24bit RGB to RBG conversion */
+
+		tpVal = (mdpImg->tpVal & 0xFF00) >> 8;
+		tpVal |= (mdpImg->tpVal & 0xFF) << 8;
+		tpVal |= (mdpImg->tpVal & 0xFF0000);
+	}
+
+	return tpVal;
+}
+
+static uint8 *mdp_get_chroma_addr(MDPIBUF *iBuf)
+{
+	uint8 *dest1;
+
+	dest1 = NULL;
+	switch (iBuf->ibuf_type) {
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		dest1 = (uint8 *) iBuf->buf;
+		dest1 += iBuf->ibuf_width * iBuf->ibuf_height * iBuf->bpp;
+		break;
+
+	default:
+		break;
+	}
+
+	return dest1;
+}
+
+static void mdp_ppp_setbg(MDPIBUF *iBuf)
+{
+	uint8 *bg0_addr;
+	uint8 *bg1_addr;
+	uint32 bg0_ystride, bg1_ystride;
+	uint32 ppp_src_cfg_reg, unpack_pattern;
+	int v_slice, h_slice;
+
+	v_slice = h_slice = 1;
+	bg0_addr = (uint8 *) iBuf->buf;
+	bg1_addr = mdp_get_chroma_addr(iBuf);
+
+	bg0_ystride = iBuf->ibuf_width * iBuf->bpp;
+	bg1_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+	switch (iBuf->ibuf_type) {
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+		/* 888 = 3bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+			PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->ibuf_type == MDP_RGB_565)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+		break;
+
+	case MDP_RGB_888:
+		/*
+		 * 888 = 3bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+		PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+		PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+		PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		unpack_pattern =
+		    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		break;
+
+	case MDP_BGRA_8888:
+	case MDP_RGBA_8888:
+	case MDP_ARGB_8888:
+	case MDP_XRGB_8888:
+		/*
+		 * 8888 = 4bytes
+		 * ARGB = 4Components
+		 * ARGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+		PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS | PPP_SRC_C3_ALPHA_EN |
+		PPP_SRC_BPP_INTERLVD_4BYTES | PPP_SRC_INTERLVD_4COMPONENTS |
+		PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB |
+		PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->ibuf_type == MDP_BGRA_8888)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->ibuf_type == MDP_RGBA_8888)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		v_slice = h_slice = 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_4COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+		unpack_pattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+		h_slice = 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		h_slice = 2;
+		break;
+
+	default:
+		return;
+	}
+
+	/* starting input address adjustment */
+	mdp_adjust_start_addr(&bg0_addr, &bg1_addr, v_slice, h_slice,
+			      iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+			      iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+			      iBuf, 1);
+
+	/*
+	 * 0x01c0: background plane 0 addr
+	 * 0x01c4: background plane 1 addr
+	 * 0x01c8: background plane 2 addr
+	 * 0x01cc: bg y stride for plane 0 and 1
+	 * 0x01d0: bg y stride for plane 2
+	 * 0x01d4: bg src PPP config
+	 * 0x01d8: unpack pattern
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c0, bg0_addr);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c4, bg1_addr);
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01cc,
+		 (bg1_ystride << 16) | bg0_ystride);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d4, ppp_src_cfg_reg);
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d8, unpack_pattern);
+}
+
+#define IS_PSEUDOPLNR(img) ((img == MDP_Y_CRCB_H2V2) | \
+				(img == MDP_Y_CBCR_H2V2) | \
+				(img == MDP_Y_CRCB_H2V1) | \
+				(img == MDP_Y_CBCR_H2V1))
+
+#define IMG_LEN(rect_h, w, rect_w, bpp) (((rect_h) * w) * bpp)
+
+#define Y_TO_CRCB_RATIO(format) \
+	((format == MDP_Y_CBCR_H2V2 || format == MDP_Y_CRCB_H2V2) ?  2 :\
+	(format == MDP_Y_CBCR_H2V1 || format == MDP_Y_CRCB_H2V1) ?  1 : 1)
+
+static void get_len(struct mdp_img *img, struct mdp_rect *rect, uint32_t bpp,
+			uint32_t *len0, uint32_t *len1)
+{
+	*len0 = IMG_LEN(rect->h, img->width, rect->w, bpp);
+	if (IS_PSEUDOPLNR(img->format))
+		*len1 = *len0/Y_TO_CRCB_RATIO(img->format);
+	else
+		*len1 = 0;
+}
+
+static void flush_imgs(struct mdp_blit_req *req, int src_bpp, int dst_bpp,
+			struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+	uint32_t src0_len, src1_len, dst0_len, dst1_len;
+
+	/* flush src images to memory before dma to mdp */
+	get_len(&req->src, &req->src_rect, src_bpp,
+	&src0_len, &src1_len);
+
+	flush_pmem_file(p_src_file,
+	req->src.offset, src0_len);
+
+	if (IS_PSEUDOPLNR(req->src.format))
+		flush_pmem_file(p_src_file,
+			req->src.offset + src0_len, src1_len);
+
+	get_len(&req->dst, &req->dst_rect, dst_bpp, &dst0_len, &dst1_len);
+	flush_pmem_file(p_dst_file, req->dst.offset, dst0_len);
+
+	if (IS_PSEUDOPLNR(req->dst.format))
+		flush_pmem_file(p_dst_file,
+			req->dst.offset + dst0_len, dst1_len);
+#endif
+}
+
+static void mdp_start_ppp(struct msm_fb_data_type *mfd, MDPIBUF *iBuf,
+struct mdp_blit_req *req, struct file *p_src_file, struct file *p_dst_file)
+{
+	uint8 *src0, *src1;
+	uint8 *dest0, *dest1;
+	uint16 inpBpp;
+	uint32 dest0_ystride;
+	uint32 src_width;
+	uint32 src_height;
+	uint32 src0_ystride;
+	uint32 dst_roi_width;
+	uint32 dst_roi_height;
+	uint32 ppp_src_cfg_reg, ppp_operation_reg, ppp_dst_cfg_reg;
+	uint32 alpha, tpVal;
+	uint32 packPattern;
+	uint32 dst_packPattern;
+	boolean inputRGB, outputRGB, pseudoplanr_output;
+	int sv_slice, sh_slice;
+	int dv_slice, dh_slice;
+	boolean perPixelAlpha = FALSE;
+	boolean ppp_lookUp_enable = FALSE;
+
+	sv_slice = sh_slice = dv_slice = dh_slice = 1;
+	alpha = tpVal = 0;
+	src_width = iBuf->mdpImg.width;
+	src_height = iBuf->roi.y + iBuf->roi.height;
+	src1 = NULL;
+	dest1 = NULL;
+
+	inputRGB = outputRGB = TRUE;
+	pseudoplanr_output = FALSE;
+	ppp_operation_reg = 0;
+	ppp_dst_cfg_reg = 0;
+	ppp_src_cfg_reg = 0;
+
+	/* Wait for the pipe to clear */
+	do { } while (mdp_ppp_pipe_wait() <= 0);
+
+	/*
+	 * destination config
+	 */
+	switch (iBuf->ibuf_type) {
+	case MDP_RGB_888:
+		dst_packPattern =
+		    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		ppp_dst_cfg_reg =
+		    PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT | PPP_DST_C2R_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_3ELEM | PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB | PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_3BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+
+	case MDP_XRGB_8888:
+	case MDP_ARGB_8888:
+	case MDP_RGBA_8888:
+		if (iBuf->ibuf_type == MDP_BGRA_8888)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->ibuf_type == MDP_RGBA_8888)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C2R_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_C3ALPHA_EN |
+		    PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_4BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V2)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+		    PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_420;
+		outputRGB = FALSE;
+		pseudoplanr_output = TRUE;
+		/*
+		 * vertically (y direction) and horizontally (x direction)
+		 * sample reduction by 2
+		 */
+
+		/*
+		 * H2V2(YUV420) Cosite
+		 *
+		 * Y    Y    Y    Y
+		 * CbCr      CbCr
+		 * Y    Y    Y    Y
+		 * Y    Y    Y    Y
+		 * CbCr      CbCr
+		 * Y    Y    Y    Y
+		 */
+		dv_slice = dh_slice = 2;
+
+		/* (x,y) and (width,height) must be even numbern */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+		iBuf->roi.lcd_y = (iBuf->roi.lcd_y / 2) * 2;
+		iBuf->roi.dst_height = (iBuf->roi.dst_height / 2) * 2;
+		iBuf->roi.y = (iBuf->roi.y / 2) * 2;
+		iBuf->roi.height = (iBuf->roi.height / 2) * 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		dst_packPattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+		ppp_dst_cfg_reg =
+		    PPP_DST_C2R_8BIT | PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT | PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+		    PPP_DST_PACK_TIGHT | PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES |
+		    PPP_DST_PLANE_INTERLVD;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+		outputRGB = FALSE;
+		/*
+		 * horizontally (x direction) sample reduction by 2
+		 *
+		 * H2V1(YUV422) Cosite
+		 *
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 */
+		dh_slice = 2;
+
+		/*
+		 * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+		 * preloaded gamma setting of 2.2 when the content is
+		 * non-linear ppp_lookUp_enable = TRUE;
+		 */
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+		    PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+		outputRGB = FALSE;
+		pseudoplanr_output = TRUE;
+		/* horizontally (x direction) sample reduction by 2 */
+		dh_slice = 2;
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+		break;
+
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+	default:
+		if (iBuf->ibuf_type == MDP_RGB_565)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C0G_6BIT |
+		    PPP_DST_C1B_5BIT |
+		    PPP_DST_C2R_5BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_3ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_2BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+	}
+
+	/* source config */
+	switch (iBuf->mdpImg.imgType) {
+	case MDP_RGB_888:
+		inpBpp = 3;
+		/*
+		 * 565 = 2bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		packPattern = MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	case MDP_BGRA_8888:
+	case MDP_RGBA_8888:
+	case MDP_ARGB_8888:
+		perPixelAlpha = TRUE;
+	case MDP_XRGB_8888:
+		inpBpp = 4;
+		/*
+		 * 8888 = 4bytes
+		 * ARGB = 4Components
+		 * ARGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS |
+			PPP_SRC_C3_ALPHA_EN | PPP_SRC_BPP_INTERLVD_4BYTES |
+			PPP_SRC_INTERLVD_4COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->mdpImg.imgType == MDP_BGRA_8888)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->mdpImg.imgType == MDP_RGBA_8888)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		inpBpp = 1;
+		src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+		/*
+		 * CbCr = 2bytes
+		 * CbCr = 2Components
+		 * Y+CbCr
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_2COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->mdpImg.imgType == MDP_Y_CRCB_H2V2)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_YCBCR |
+		    PPP_OP_SRC_CHROMA_420 |
+		    PPP_OP_SRC_CHROMA_COSITE |
+		    PPP_OP_DST_CHROMA_RGB | PPP_OP_DST_CHROMA_COSITE;
+
+		inputRGB = FALSE;
+		sh_slice = sv_slice = 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		inpBpp = 2;
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_4COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+		packPattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+
+		ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+		    PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+
+		/*
+		 * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+		 * preloaded inverse gamma setting of 2.2 since they're
+		 * symetric when the content is non-linear
+		 * ppp_lookUp_enable = TRUE;
+		 */
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+		inputRGB = FALSE;
+		sh_slice = 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		inpBpp = 1;
+		src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->mdpImg.imgType == MDP_Y_CBCR_H2V1)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+		    PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+		inputRGB = FALSE;
+		sh_slice = 2;
+		break;
+
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+	default:
+		inpBpp = 2;
+		/*
+		 * 565 = 2bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+			PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->mdpImg.imgType == MDP_RGB_565)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	}
+
+	if (pseudoplanr_output)
+		ppp_dst_cfg_reg |= PPP_DST_PLANE_PSEUDOPLN;
+
+	/* YCbCr to RGB color conversion flag */
+	if ((!inputRGB) && (outputRGB)) {
+		ppp_operation_reg |= PPP_OP_CONVERT_YCBCR2RGB |
+		    PPP_OP_CONVERT_ON;
+
+		/*
+		 * primary/secondary is sort of misleading term...but
+		 * in mdp2.2/3.0 we only use primary matrix (forward/rev)
+		 * in mdp3.1 we use set1(prim) and set2(secd)
+		 */
+#ifdef CONFIG_FB_MSM_MDP31
+		ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_SECONDARY |
+					PPP_OP_DST_RGB;
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0);
+#endif
+
+		if (ppp_lookUp_enable) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+			    PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+		}
+	}
+	/* RGB to YCbCr color conversion flag */
+	if ((inputRGB) && (!outputRGB)) {
+		ppp_operation_reg |= PPP_OP_CONVERT_RGB2YCBCR |
+		    PPP_OP_CONVERT_ON;
+
+#ifdef CONFIG_FB_MSM_MDP31
+		ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_PRIMARY |
+					PPP_OP_DST_YCBCR;
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0x1e);
+#endif
+
+		if (ppp_lookUp_enable) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+			    PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+		}
+	}
+	/* YCbCr to YCbCr color conversion flag */
+	if ((!inputRGB) && (!outputRGB)) {
+		if ((ppp_lookUp_enable) &&
+		    (iBuf->mdpImg.imgType != iBuf->ibuf_type)) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON;
+		}
+	}
+
+	ppp_src_cfg_reg |= (iBuf->roi.x % 2) ? PPP_SRC_BPP_ROI_ODD_X : 0;
+	ppp_src_cfg_reg |= (iBuf->roi.y % 2) ? PPP_SRC_BPP_ROI_ODD_Y : 0;
+
+	if (req->flags & MDP_DEINTERLACE)
+		ppp_operation_reg |= PPP_OP_DEINT_EN;
+
+	/* Dither at DMA side only since iBuf format is RGB888 */
+	if (iBuf->mdpImg.mdpOp & MDPOP_DITHER)
+		ppp_operation_reg |= PPP_OP_DITHER_EN;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ROTATION) {
+		ppp_operation_reg |= PPP_OP_ROT_ON;
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			ppp_operation_reg |= PPP_OP_ROT_90;
+		}
+		if (iBuf->mdpImg.mdpOp & MDPOP_LR) {
+			ppp_operation_reg |= PPP_OP_FLIP_LR;
+		}
+		if (iBuf->mdpImg.mdpOp & MDPOP_UD) {
+			ppp_operation_reg |= PPP_OP_FLIP_UD;
+		}
+	}
+
+	src0_ystride = src_width * inpBpp;
+	dest0_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+	/* no need to care about rotation since it's the real-XY. */
+	dst_roi_width = iBuf->roi.dst_width;
+	dst_roi_height = iBuf->roi.dst_height;
+
+	src0 = (uint8 *) iBuf->mdpImg.bmy_addr;
+	dest0 = (uint8 *) iBuf->buf;
+
+	/* Jumping from Y-Plane to Chroma Plane */
+	dest1 = mdp_get_chroma_addr(iBuf);
+
+	/* first pixel addr calculation */
+	mdp_adjust_start_addr(&src0, &src1, sv_slice, sh_slice, iBuf->roi.x,
+			      iBuf->roi.y, src_width, src_height, inpBpp, iBuf,
+			      0);
+	mdp_adjust_start_addr(&dest0, &dest1, dv_slice, dh_slice,
+			      iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+			      iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+			      iBuf, 2);
+
+	/* set scale operation */
+	mdp_set_scale(iBuf, dst_roi_width, dst_roi_height,
+		      inputRGB, outputRGB, &ppp_operation_reg);
+
+	/*
+	 * setting background source for blending
+	 */
+	mdp_set_blend_attr(iBuf, &alpha, &tpVal, perPixelAlpha,
+			   &ppp_operation_reg);
+
+	if (ppp_operation_reg & PPP_OP_BLEND_ON) {
+		mdp_ppp_setbg(iBuf);
+
+		if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+			ppp_operation_reg |= PPP_OP_BG_CHROMA_H2V1;
+
+			if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+				tpVal = mdp_conv_matx_rgb2yuv(tpVal,
+						      (uint16 *) &
+						      mdp_ccs_rgb2yuv,
+						      &mdp_plv[0], NULL);
+			}
+		}
+	}
+
+	/*
+	 * 0x0004: enable dbg bus
+	 * 0x0100: "don't care" Edge Condit until scaling is on
+	 * 0x0104: xrc tile x&y size u7.6 format = 7bit.6bit
+	 * 0x0108: src pixel size
+	 * 0x010c: component plane 0 starting address
+	 * 0x011c: component plane 0 ystride
+	 * 0x0124: PPP source config register
+	 * 0x0128: unpacked pattern from lsb to msb (eg. RGB->BGR)
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0108, (iBuf->roi.height << 16 |
+						      iBuf->roi.width));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x010c, src0); /* comp.plane 0 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0110, src1); /* comp.plane 1 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x011c,
+		 (src0_ystride << 16 | src0_ystride));
+
+	/* setup for rgb 565 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0124, ppp_src_cfg_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0128, packPattern);
+	/*
+	 * 0x0138: PPP destination operation register
+	 * 0x014c: constant_alpha|transparent_color
+	 * 0x0150: PPP destination config register
+	 * 0x0154: PPP packing pattern
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0138, ppp_operation_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x014c, alpha << 24 | tpVal);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0150, ppp_dst_cfg_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0154, dst_packPattern);
+
+	/*
+	 * 0x0164: ROI height and width
+	 * 0x0168: Component Plane 0 starting addr
+	 * 0x016c: Component Plane 1 starting addr
+	 * 0x0178: Component Plane 1/0 y stride
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0164,
+		 (dst_roi_height << 16 | dst_roi_width));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0168, dest0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x016c, dest1);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0178,
+		 (dest0_ystride << 16 | dest0_ystride));
+
+	flush_imgs(req, inpBpp, iBuf->bpp, p_src_file, p_dst_file);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	mdp_ppp_process_curr_djob();
+#else
+	mdp_pipe_kickoff(MDP_PPP_TERM, mfd);
+#endif
+}
+
+static int mdp_ppp_verify_req(struct mdp_blit_req *req)
+{
+	u32 src_width, src_height, dst_width, dst_height;
+
+	if (req == NULL)
+		return -1;
+
+	if (MDP_IS_IMGTYPE_BAD(req->src.format) ||
+	    MDP_IS_IMGTYPE_BAD(req->dst.format))
+		return -1;
+
+	if ((req->src.width == 0) || (req->src.height == 0) ||
+	    (req->src_rect.w == 0) || (req->src_rect.h == 0) ||
+	    (req->dst.width == 0) || (req->dst.height == 0) ||
+	    (req->dst_rect.w == 0) || (req->dst_rect.h == 0))
+
+		return -1;
+
+	if (((req->src_rect.x + req->src_rect.w) > req->src.width) ||
+	    ((req->src_rect.y + req->src_rect.h) > req->src.height))
+		return -1;
+
+	if (((req->dst_rect.x + req->dst_rect.w) > req->dst.width) ||
+	    ((req->dst_rect.y + req->dst_rect.h) > req->dst.height))
+		return -1;
+
+	/*
+	 * scaling range check
+	 */
+	src_width = req->src_rect.w;
+	src_height = req->src_rect.h;
+
+	if (req->flags & MDP_ROT_90) {
+		dst_width = req->dst_rect.h;
+		dst_height = req->dst_rect.w;
+	} else {
+		dst_width = req->dst_rect.w;
+		dst_height = req->dst_rect.h;
+	}
+
+	switch (req->dst.format) {
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+		src_width = (src_width / 2) * 2;
+		src_height = (src_height / 2) * 2;
+		dst_width = (src_width / 2) * 2;
+		dst_height = (src_height / 2) * 2;
+		break;
+
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_YCRYCB_H2V1:
+		src_width = (src_width / 2) * 2;
+		dst_width = (src_width / 2) * 2;
+		break;
+
+	default:
+		break;
+	}
+
+	if (((MDP_SCALE_Q_FACTOR * dst_width) / src_width >
+	     MDP_MAX_X_SCALE_FACTOR)
+	    || ((MDP_SCALE_Q_FACTOR * dst_width) / src_width <
+		MDP_MIN_X_SCALE_FACTOR))
+		return -1;
+
+	if (((MDP_SCALE_Q_FACTOR * dst_height) / src_height >
+	     MDP_MAX_Y_SCALE_FACTOR)
+	    || ((MDP_SCALE_Q_FACTOR * dst_height) / src_height <
+		MDP_MIN_Y_SCALE_FACTOR))
+		return -1;
+
+	return 0;
+}
+
+/**
+ * get_gem_img() - retrieve drm obj's start address and size
+ * @img:	contains drm file descriptor and gem handle
+ * @start:	repository of starting address of drm obj allocated memory
+ * @len:	repository of size of drm obj alloacted memory
+ *
+ **/
+int get_gem_img(struct mdp_img *img, unsigned long *start, unsigned long *len)
+{
+	panic("waaaaaaaah");
+	//return kgsl_gem_obj_addr(img->memory_id, (int)img->priv, start, len);
+}
+
+int get_img(struct mdp_img *img, struct fb_info *info, unsigned long *start,
+	    unsigned long *len, struct file **pp_file)
+{
+	int put_needed, ret = 0;
+	struct file *file;
+	unsigned long vstart;
+#ifdef CONFIG_ANDROID_PMEM
+	if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+		return 0;
+#endif
+	file = fget_light(img->memory_id, &put_needed);
+	if (file == NULL)
+		return -1;
+
+	if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+		*start = info->fix.smem_start;
+		*len = info->fix.smem_len;
+		*pp_file = file;
+	} else {
+		ret = -1;
+		fput_light(file, put_needed);
+	}
+	return ret;
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file)
+{
+	unsigned long src_start, dst_start;
+	unsigned long src_len = 0;
+	unsigned long dst_len = 0;
+	MDPIBUF iBuf;
+	u32 dst_width, dst_height;
+	struct file *p_src_file = 0 , *p_dst_file = 0;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (req->dst.format == MDP_FB_FORMAT)
+		req->dst.format =  mfd->fb_imgType;
+	if (req->src.format == MDP_FB_FORMAT)
+		req->src.format = mfd->fb_imgType;
+
+	if (req->flags & MDP_BLIT_SRC_GEM) {
+		if (get_gem_img(&req->src, &src_start, &src_len) < 0)
+			return -1;
+	} else {
+		get_img(&req->src, info, &src_start, &src_len, &p_src_file);
+	}
+	if (src_len == 0) {
+		printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+		       "memory\n");
+		return -1;
+	}
+
+	if (req->flags & MDP_BLIT_DST_GEM) {
+		if (get_gem_img(&req->dst, &dst_start, &dst_len) < 0)
+			return -1;
+	} else {
+		get_img(&req->dst, info, &dst_start, &dst_len, &p_dst_file);
+	}
+	if (dst_len == 0) {
+		printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+		       "memory\n");
+		return -1;
+	}
+	*pp_src_file = p_src_file;
+	*pp_dst_file = p_dst_file;
+	if (mdp_ppp_verify_req(req)) {
+		printk(KERN_ERR "mdp_ppp: invalid image!\n");
+		return -1;
+	}
+
+	iBuf.ibuf_width = req->dst.width;
+	iBuf.ibuf_height = req->dst.height;
+	iBuf.bpp = bytes_per_pixel[req->dst.format];
+
+	iBuf.ibuf_type = req->dst.format;
+	iBuf.buf = (uint8 *) dst_start;
+	iBuf.buf += req->dst.offset;
+
+	iBuf.roi.lcd_x = req->dst_rect.x;
+	iBuf.roi.lcd_y = req->dst_rect.y;
+	iBuf.roi.dst_width = req->dst_rect.w;
+	iBuf.roi.dst_height = req->dst_rect.h;
+
+	iBuf.roi.x = req->src_rect.x;
+	iBuf.roi.width = req->src_rect.w;
+	iBuf.roi.y = req->src_rect.y;
+	iBuf.roi.height = req->src_rect.h;
+
+	iBuf.mdpImg.width = req->src.width;
+	iBuf.mdpImg.imgType = req->src.format;
+
+	iBuf.mdpImg.bmy_addr = (uint32 *) (src_start + req->src.offset);
+	iBuf.mdpImg.cbcr_addr =
+	    (uint32 *) ((uint32) iBuf.mdpImg.bmy_addr +
+			req->src.width * req->src.height);
+
+	iBuf.mdpImg.mdpOp = MDPOP_NOP;
+
+	/* blending check */
+	if (req->transp_mask != MDP_TRANSP_NOP) {
+		iBuf.mdpImg.mdpOp |= MDPOP_TRANSP;
+		iBuf.mdpImg.tpVal = req->transp_mask;
+		iBuf.mdpImg.tpVal = mdp_calc_tpval(&iBuf.mdpImg);
+	}
+
+	req->alpha &= 0xff;
+	if (req->alpha < MDP_ALPHA_NOP) {
+		iBuf.mdpImg.mdpOp |= MDPOP_ALPHAB;
+		iBuf.mdpImg.alpha = req->alpha;
+	}
+
+	/* rotation check */
+	if (req->flags & MDP_FLIP_LR)
+		iBuf.mdpImg.mdpOp |= MDPOP_LR;
+	if (req->flags & MDP_FLIP_UD)
+		iBuf.mdpImg.mdpOp |= MDPOP_UD;
+	if (req->flags & MDP_ROT_90)
+		iBuf.mdpImg.mdpOp |= MDPOP_ROT90;
+	if (req->flags & MDP_DITHER)
+		iBuf.mdpImg.mdpOp |= MDPOP_DITHER;
+
+	if (req->flags & MDP_BLEND_FG_PREMULT) {
+#ifdef CONFIG_FB_MSM_MDP31
+		iBuf.mdpImg.mdpOp |= MDPOP_FG_PM_ALPHA;
+#else
+		return -EINVAL;
+#endif
+	}
+
+	if (req->flags & MDP_DEINTERLACE) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if ((req->src.format != MDP_Y_CBCR_H2V2) &&
+			(req->src.format != MDP_Y_CRCB_H2V2))
+#endif
+		return -EINVAL;
+	}
+
+	/* scale check */
+	if (req->flags & MDP_ROT_90) {
+		dst_width = req->dst_rect.h;
+		dst_height = req->dst_rect.w;
+	} else {
+		dst_width = req->dst_rect.w;
+		dst_height = req->dst_rect.h;
+	}
+
+	if ((iBuf.roi.width != dst_width) || (iBuf.roi.height != dst_height))
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE;
+
+	if (req->flags & MDP_BLUR) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if (req->flags & MDP_SHARPENING)
+			printk(KERN_WARNING
+				"mdp: MDP_SHARPENING is set with MDP_BLUR!\n");
+		req->flags |= MDP_SHARPENING;
+		req->sharpening_strength = -127;
+#else
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_BLUR;
+
+#endif
+	}
+
+	if (req->flags & MDP_SHARPENING) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if ((req->sharpening_strength > 127) ||
+			(req->sharpening_strength < -127)) {
+			printk(KERN_ERR
+				"%s: sharpening strength out of range\n",
+				__func__);
+			return -EINVAL;
+		}
+
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_SHARPENING;
+		iBuf.mdpImg.sp_value = req->sharpening_strength & 0xff;
+#else
+		return -EINVAL;
+#endif
+	}
+
+	down(&mdp_ppp_mutex);
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+#else
+	/* bg tile fetching HW workaround */
+	if (((iBuf.mdpImg.mdpOp & (MDPOP_TRANSP | MDPOP_ALPHAB)) ||
+	     (req->src.format == MDP_ARGB_8888) ||
+	     (req->src.format == MDP_BGRA_8888) ||
+	     (req->src.format == MDP_RGBA_8888)) &&
+	    (iBuf.mdpImg.mdpOp & MDPOP_ROT90) && (req->dst_rect.w <= 16)) {
+		int dst_h, src_w, i;
+
+		src_w = req->src_rect.w;
+		dst_h = iBuf.roi.dst_height;
+
+		for (i = 0; i < (req->dst_rect.h / 16); i++) {
+			/* this tile size */
+			iBuf.roi.dst_height = 16;
+			iBuf.roi.width =
+			    (16 * req->src_rect.w) / req->dst_rect.h;
+
+			/* if it's out of scale range... */
+			if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+			     iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR)
+				iBuf.roi.width =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MAX_X_SCALE_FACTOR;
+			else if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				  iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR)
+				iBuf.roi.width =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MIN_X_SCALE_FACTOR;
+
+			mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+
+			/* next tile location */
+			iBuf.roi.lcd_y += 16;
+			iBuf.roi.x += iBuf.roi.width;
+
+			/* this is for a remainder update */
+			dst_h -= 16;
+			src_w -= iBuf.roi.width;
+		}
+
+		if ((dst_h < 0) || (src_w < 0))
+			printk
+			    ("msm_fb: mdp_blt_ex() unexpected result! line:%d\n",
+			     __LINE__);
+
+		/* remainder update */
+		if ((dst_h > 0) && (src_w > 0)) {
+			u32 tmp_v;
+
+			iBuf.roi.dst_height = dst_h;
+			iBuf.roi.width = src_w;
+
+			if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+			     iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR) {
+				tmp_v =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MAX_X_SCALE_FACTOR +
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+				    MDP_MAX_X_SCALE_FACTOR ? 1 : 0;
+
+				/* move x location as roi width gets bigger */
+				iBuf.roi.x -= tmp_v - iBuf.roi.width;
+				iBuf.roi.width = tmp_v;
+			} else
+			    if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				 iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR) {
+				tmp_v =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MIN_X_SCALE_FACTOR +
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+				    MDP_MIN_X_SCALE_FACTOR ? 1 : 0;
+
+				/*
+				 * we don't move x location for continuity of
+				 * source image
+				 */
+				iBuf.roi.width = tmp_v;
+			}
+
+			mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+		}
+	} else {
+		mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+	}
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	up(&mdp_ppp_mutex);
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.c b/drivers/staging/msm/mdp_ppp_dq.c
new file mode 100644
index 00000000000..3dc1c0cc61f
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.c
@@ -0,0 +1,347 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+static boolean mdp_ppp_intr_flag = FALSE;
+static boolean mdp_ppp_busy_flag = FALSE;
+
+/* Queue to keep track of the completed jobs for cleaning */
+static LIST_HEAD(mdp_ppp_djob_clnrq);
+static DEFINE_SPINLOCK(mdp_ppp_djob_clnrq_lock);
+
+/* Worker to cleanup Display Jobs */
+static struct workqueue_struct *mdp_ppp_djob_clnr;
+
+/* Display Queue (DQ) for MDP PPP Block */
+static LIST_HEAD(mdp_ppp_dq);
+static DEFINE_SPINLOCK(mdp_ppp_dq_lock);
+
+/* Current Display Job for MDP PPP */
+static struct mdp_ppp_djob *curr_djob;
+
+/* Track ret code for the last opeartion */
+static int mdp_ppp_ret_code;
+
+inline int mdp_ppp_get_ret_code(void)
+{
+	return mdp_ppp_ret_code;
+}
+
+/* Push <Reg, Val> pair into DQ (if available) to later
+ * program the MDP PPP Block */
+inline void mdp_ppp_outdw(uint32_t addr, uint32_t data)
+{
+	if (curr_djob) {
+
+		/* get the last node of the list. */
+		struct mdp_ppp_roi_cmd_set *node =
+			list_entry(curr_djob->roi_cmd_list.prev,
+				struct mdp_ppp_roi_cmd_set, node);
+
+		/* If a node is already full, create a new one and add it to
+		 * the list (roi_cmd_list).
+		 */
+		if (node->ncmds == MDP_PPP_ROI_NODE_SIZE) {
+			node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set),
+				GFP_KERNEL);
+			if (!node) {
+				printk(KERN_ERR
+					"MDP_PPP: not enough memory.\n");
+				mdp_ppp_ret_code = -EINVAL;
+				return;
+			}
+
+			/* no ROI commands initially */
+			node->ncmds = 0;
+
+			/* add one node to roi_cmd_list. */
+			list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+		}
+
+		/* register ROI commands */
+		node->cmd[node->ncmds].reg = addr;
+		node->cmd[node->ncmds].val = data;
+		node->ncmds++;
+	} else
+		/* program MDP PPP block now */
+		outpdw((addr), (data));
+}
+
+/* Initialize DQ */
+inline void mdp_ppp_dq_init(void)
+{
+	mdp_ppp_djob_clnr = create_singlethread_workqueue("MDPDJobClnrThrd");
+}
+
+/* Release resources of a job (DJob). */
+static void mdp_ppp_del_djob(struct mdp_ppp_djob *job)
+{
+	struct mdp_ppp_roi_cmd_set *node, *tmp;
+
+	/* release mem */
+	mdp_ppp_put_img(job->p_src_file, job->p_dst_file);
+
+	/* release roi_cmd_list */
+	list_for_each_entry_safe(node, tmp, &job->roi_cmd_list, node) {
+		list_del(&node->node);
+		kfree(node);
+	}
+
+	/* release job struct */
+	kfree(job);
+}
+
+/* Worker thread to reclaim resources once a display job is done */
+static void mdp_ppp_djob_cleaner(struct work_struct *work)
+{
+	struct mdp_ppp_djob *job;
+
+	MDP_PPP_DEBUG_MSG("mdp ppp display job cleaner started \n");
+
+	/* cleanup display job */
+	job = container_of(work, struct mdp_ppp_djob, cleaner.work);
+	if (likely(work && job))
+		mdp_ppp_del_djob(job);
+}
+
+/* Create a new Display Job (DJob) */
+inline struct mdp_ppp_djob *mdp_ppp_new_djob(void)
+{
+	struct mdp_ppp_djob *job;
+	struct mdp_ppp_roi_cmd_set *node;
+
+	/* create a new djob */
+	job = kmalloc(sizeof(struct mdp_ppp_djob), GFP_KERNEL);
+	if (!job)
+		return NULL;
+
+	/* add the first node to curr_djob->roi_cmd_list */
+	node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set), GFP_KERNEL);
+	if (!node) {
+		kfree(job);
+		return NULL;
+	}
+
+	/* make this current djob container to keep track of the curr djob not
+	 * used in the async path i.e. no sync needed
+	 *
+	 * Should not contain any references from the past djob
+	 */
+	BUG_ON(curr_djob);
+	curr_djob = job;
+	INIT_LIST_HEAD(&curr_djob->roi_cmd_list);
+
+	/* no ROI commands initially */
+	node->ncmds = 0;
+	INIT_LIST_HEAD(&node->node);
+	list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+
+	/* register this djob with the djob cleaner
+	 * initializes 'work' data struct
+	 */
+	INIT_DELAYED_WORK(&curr_djob->cleaner, mdp_ppp_djob_cleaner);
+	INIT_LIST_HEAD(&curr_djob->entry);
+
+	curr_djob->p_src_file = 0;
+	curr_djob->p_dst_file = 0;
+
+	return job;
+}
+
+/* Undo the effect of mdp_ppp_new_djob() */
+inline void mdp_ppp_clear_curr_djob(void)
+{
+	if (likely(curr_djob)) {
+		mdp_ppp_del_djob(curr_djob);
+		curr_djob = NULL;
+	}
+}
+
+/* Cleanup dirty djobs */
+static void mdp_ppp_flush_dirty_djobs(void *cond)
+{
+	unsigned long flags;
+	struct mdp_ppp_djob *job;
+
+	/* Flush the jobs from the djob clnr queue */
+	while (cond && test_bit(0, (unsigned long *)cond)) {
+
+		/* Until we are done with the cleanup queue */
+		spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+		if (list_empty(&mdp_ppp_djob_clnrq)) {
+			spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+			break;
+		}
+
+		MDP_PPP_DEBUG_MSG("flushing djobs ... loop \n");
+
+		/* Retrieve the job that needs to be cleaned */
+		job = list_entry(mdp_ppp_djob_clnrq.next,
+				struct mdp_ppp_djob, entry);
+		list_del_init(&job->entry);
+		spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+		/* Keep mem state coherent */
+		msm_fb_ensure_mem_coherency_after_dma(job->info, &job->req, 1);
+
+		/* Schedule jobs for cleanup
+		 * A seperate worker thread does this */
+		queue_delayed_work(mdp_ppp_djob_clnr, &job->cleaner,
+			mdp_timer_duration);
+	}
+}
+
+/* If MDP PPP engine is busy, wait until it is available again */
+void mdp_ppp_wait(void)
+{
+	unsigned long flags;
+	int cond = 1;
+
+	/* keep flushing dirty djobs as long as MDP PPP engine is busy */
+	mdp_ppp_flush_dirty_djobs(&mdp_ppp_busy_flag);
+
+	/* block if MDP PPP engine is still busy */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	if (test_bit(0, (unsigned long *)&mdp_ppp_busy_flag)) {
+
+		/* prepare for the wakeup event */
+		test_and_set_bit(0, (unsigned long *)&mdp_ppp_waiting);
+		INIT_COMPLETION(mdp_ppp_comp);
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* block uninterruptibly until available */
+		MDP_PPP_DEBUG_MSG("waiting for mdp... \n");
+		wait_for_completion_killable(&mdp_ppp_comp);
+
+		/* if MDP PPP engine is still free,
+		 * disable INT_MDP if enabled
+		 */
+		spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+		if (!test_bit(0, (unsigned long *)&mdp_ppp_busy_flag) &&
+		test_and_clear_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+			mdp_disable_irq(MDP_PPP_TERM);
+	}
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+	/* flush remaining dirty djobs, if any */
+	mdp_ppp_flush_dirty_djobs(&cond);
+}
+
+/* Program MDP PPP block to process this ROI */
+static void mdp_ppp_process_roi(struct list_head *roi_cmd_list)
+{
+
+	/* program PPP engine with registered ROI commands */
+	struct mdp_ppp_roi_cmd_set *node;
+	list_for_each_entry(node, roi_cmd_list, node) {
+		int i = 0;
+		for (; i < node->ncmds; i++) {
+			MDP_PPP_DEBUG_MSG("%d: reg: 0x%x val: 0x%x \n",
+					i, node->cmd[i].reg, node->cmd[i].val);
+			outpdw(node->cmd[i].reg, node->cmd[i].val);
+		}
+	}
+
+	/* kickoff MDP PPP engine */
+	MDP_PPP_DEBUG_MSG("kicking off mdp \n");
+	outpdw(MDP_BASE + 0x30, 0x1000);
+}
+
+/* Submit this display job to MDP PPP engine */
+static void mdp_ppp_dispatch_djob(struct mdp_ppp_djob *job)
+{
+	/* enable INT_MDP if disabled */
+	if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+		mdp_enable_irq(MDP_PPP_TERM);
+
+	/* turn on PPP and CMD blocks */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	/* process this ROI */
+	mdp_ppp_process_roi(&job->roi_cmd_list);
+}
+
+/* Enqueue this display job to be cleaned up later in "mdp_ppp_djob_done" */
+static inline void mdp_ppp_enqueue_djob(struct mdp_ppp_djob *job)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	list_add_tail(&job->entry, &mdp_ppp_dq);
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+}
+
+/* First enqueue display job for cleanup and dispatch immediately
+ * if MDP PPP engine is free */
+void mdp_ppp_process_curr_djob(void)
+{
+	/* enqueue djob */
+	mdp_ppp_enqueue_djob(curr_djob);
+
+	/* dispatch now if MDP PPP engine is free */
+	if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_busy_flag))
+		mdp_ppp_dispatch_djob(curr_djob);
+
+	/* done with the current djob */
+	curr_djob = NULL;
+}
+
+/* Called from mdp_isr - cleanup finished job and start with next
+ * if available else set MDP PPP engine free */
+void mdp_ppp_djob_done(void)
+{
+	struct mdp_ppp_djob *curr, *next;
+	unsigned long flags;
+
+	/* dequeue current */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	curr = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob, entry);
+	list_del_init(&curr->entry);
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+	/* cleanup current - enqueue in the djob clnr queue */
+	spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+	list_add_tail(&curr->entry, &mdp_ppp_djob_clnrq);
+	spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+	/* grab next pending */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	if (!list_empty(&mdp_ppp_dq)) {
+		next = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob,
+			entry);
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* process next in the queue */
+		mdp_ppp_process_roi(&next->roi_cmd_list);
+	} else {
+		/* no pending display job */
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* turn off PPP and CMD blocks - "in_isr" is TRUE */
+		mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+
+		/* notify if waiting */
+		if (test_and_clear_bit(0, (unsigned long *)&mdp_ppp_waiting))
+			complete(&mdp_ppp_comp);
+
+		/* set free */
+		test_and_clear_bit(0, (unsigned long *)&mdp_ppp_busy_flag);
+	}
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.h b/drivers/staging/msm/mdp_ppp_dq.h
new file mode 100644
index 00000000000..03e4e9a5f23
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.h
@@ -0,0 +1,86 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_PPP_DQ_H
+#define MDP_PPP_DQ_H
+
+#include "msm_fb_def.h"
+
+#define MDP_PPP_DEBUG_MSG MSM_FB_DEBUG
+
+/* The maximum number of <Reg,Val> pairs in an mdp_ppp_roi_cmd_set structure (a
+ * node)
+ */
+#define MDP_PPP_ROI_NODE_SIZE 32
+
+/* ROI config command (<Reg,Val> pair) for MDP PPP block */
+struct mdp_ppp_roi_cmd {
+	uint32_t reg;
+	uint32_t val;
+};
+
+/* ROI config commands for MDP PPP block are stored in a list of
+ * mdp_ppp_roi_cmd_set structures (nodes).
+ */
+struct mdp_ppp_roi_cmd_set {
+	struct list_head node;
+	uint32_t ncmds; /* number of commands in this set (node). */
+	struct mdp_ppp_roi_cmd cmd[MDP_PPP_ROI_NODE_SIZE];
+};
+
+/* MDP PPP Display Job (DJob) */
+struct mdp_ppp_djob {
+	struct list_head entry;
+	/* One ROI per MDP PPP DJob */
+	struct list_head roi_cmd_list;
+	struct mdp_blit_req req;
+	struct fb_info *info;
+	struct delayed_work cleaner;
+	struct file *p_src_file, *p_dst_file;
+};
+
+extern struct completion mdp_ppp_comp;
+extern boolean mdp_ppp_waiting;
+extern unsigned long mdp_timer_duration;
+
+unsigned int mdp_ppp_async_op_get(void);
+void mdp_ppp_async_op_set(unsigned int flag);
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+	struct mdp_blit_req *req_list, int req_list_count);
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file);
+void mdp_ppp_dq_init(void);
+void mdp_ppp_outdw(uint32_t addr, uint32_t data);
+struct mdp_ppp_djob *mdp_ppp_new_djob(void);
+void mdp_ppp_clear_curr_djob(void);
+void mdp_ppp_process_curr_djob(void);
+int mdp_ppp_get_ret_code(void);
+void mdp_ppp_djob_done(void);
+void mdp_ppp_wait(void);
+
+#endif /* MDP_PPP_DQ_H */
diff --git a/drivers/staging/msm/mdp_ppp_v20.c b/drivers/staging/msm/mdp_ppp_v20.c
new file mode 100644
index 00000000000..b5b7271921e
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v20.c
@@ -0,0 +1,2486 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static MDP_SCALE_MODE mdp_curr_up_scale_xy;
+static MDP_SCALE_MODE mdp_curr_down_scale_x;
+static MDP_SCALE_MODE mdp_curr_down_scale_y;
+
+static long long mdp_do_div(long long num, long long den)
+{
+	do_div(num, den);
+	return num;
+}
+
+struct mdp_table_entry mdp_gaussian_blur_table[] = {
+	/* max variance */
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50280, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50284, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50288, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5028c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50290, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50294, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50298, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5029c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502ac, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502bc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502cc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502dc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502ec, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502fc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50300, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50304, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50308, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5030c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50310, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50314, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50318, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5031c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50320, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50324, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50328, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5032c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50330, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50334, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50338, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5033c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50340, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50344, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50348, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5034c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50350, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50354, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50358, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5035c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50360, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50364, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50368, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5036c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50370, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50374, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50378, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5037c, 0x20000080 },
+};
+
+static void load_scale_table(
+	struct mdp_table_entry *table, int len)
+{
+	int i;
+	for (i = 0; i < len; i++)
+		MDP_OUTP(MDP_BASE + table[i].reg, table[i].val);
+}
+
+static void mdp_load_pr_upscale_table(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50204, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50208, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5020c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50210, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50214, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50218, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5021c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50220, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50224, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50228, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5022c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50230, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50234, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50238, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5023c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50240, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50244, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50248, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5024c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50250, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50254, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50258, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5025c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50260, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50264, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50268, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5026c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50270, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50274, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50278, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5027c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_bc_upscale_table(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50204, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50208, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5020c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50210, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50214, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50218, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5021c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x50220, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x50224, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x50228, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x5022c, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x50230, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x50234, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x50238, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x5023c, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x50240, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x50244, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x50248, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x5024c, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x50250, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x50254, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x50258, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x5025c, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x50260, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x50264, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x50268, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x5026c, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x50270, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x50274, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x50278, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x5027c, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_x_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x23400083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x23000083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x23000082);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x23000081);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x23000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x22c0007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x2280007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x2280007e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x2280007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x2240007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x2240007c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x2240007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x2200007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x22400079);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x22400078);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x22400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x22000077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x22000076);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x22000075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x21c00075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x21c00074);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x21c00073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x21800073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x21800072);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x21800071);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x21800070);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x2180006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x2140006e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x2140006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x2100006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x2100006c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_y_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x23400083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x23000083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x23000082);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x23000081);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x23000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x22c0007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x2280007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x2280007e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x2280007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x2240007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x2240007c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x2240007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x2200007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x22400079);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x22400078);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x22400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x22000077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x22000076);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x22000075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x21c00075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x21c00074);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x21c00073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x21800073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x21800072);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x21800071);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x21800070);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x2180006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x2140006e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x2140006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x2100006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x2100006c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_x_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x33800088);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x33400084);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x33000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x3300007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x32400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x32000073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x31c0006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x3140006b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x31000067);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x30800062);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x2fc0005f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x2fc0005b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x2f400057);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x2e400054);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x2e000050);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x2d80004c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x2d000049);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x2c800045);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x2c000042);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x2b40003e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x2a80003b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x2a000039);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x29400036);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x28800032);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x2800002f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x2740002c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x26c00029);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x26000027);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x25000024);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x24800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x23800020);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_y_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x33800088);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x33400084);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x33000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x3300007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x32400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x32000073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x31c0006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x3140006b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x31000067);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x30800062);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x2fc0005f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x2fc0005b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x2f400057);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x2e400054);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x2e000050);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x2d80004c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x2d000049);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x2c800045);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x2c000042);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x2b40003e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x2a80003b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x2a000039);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x29400036);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x28800032);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x2800002f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x2740002c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x26c00029);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x26000027);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x25000024);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x24800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x23800020);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_x_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x4bc00068);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x4bc00060);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x4b800059);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x4b000052);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x4a80004b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x4a000044);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x4940003d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x48400037);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x47800031);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x4640002b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x45000026);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x43800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x4240001c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x40800018);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x3f000014);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x3d400010);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x3b80000c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x39800009);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x37c00006);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x35800004);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x33800002);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x31400000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x2f4003fe);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x2d0003fc);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x2b0003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x28c003fa);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x268003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x244003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x224003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x200003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x1e0003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_y_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x4bc00068);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x4bc00060);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x4b800059);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x4b000052);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x4a80004b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x4a000044);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x4940003d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x48400037);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x47800031);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x4640002b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x45000026);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x43800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x4240001c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x40800018);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x3f000014);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x3d400010);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x3b80000c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x39800009);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x37c00006);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x35800004);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x33800002);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x31400000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x2f4003fe);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x2d0003fc);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x2b0003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x28c003fa);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x268003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x244003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x224003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x200003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x1e0003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_x_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_y_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x50370, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x50374, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x34003fe);
+}
+
+static int mdp_get_edge_cond(MDPIBUF *iBuf, uint32 *dup, uint32 *dup2)
+{
+	uint32 reg;
+	uint32 dst_roi_width;	/* Dimensions of DST ROI. */
+	uint32 dst_roi_height;	/* Used to calculate scaling ratios. */
+
+	/*
+	 * positions of the luma pixel(relative to the image ) required for
+	 * scaling the ROI
+	 */
+	int32 luma_interp_point_left = 0; /* left-most luma pixel needed */
+	int32 luma_interp_point_right = 0; /* right-most luma pixel needed */
+	int32 luma_interp_point_top = 0; /* top-most luma pixel needed */
+	int32 luma_interp_point_bottom = 0; /* bottom-most luma pixel needed */
+
+	/*
+	 * positions of the chroma pixel(relative to the image ) required for
+	 * interpolating a chroma value at all required luma positions
+	 */
+	/* left-most chroma pixel needed */
+	int32 chroma_interp_point_left = 0;
+	/* right-most chroma pixel needed */
+	int32 chroma_interp_point_right = 0;
+	/* top-most chroma pixel needed */
+	int32 chroma_interp_point_top = 0;
+	/* bottom-most chroma pixel needed */
+	int32 chroma_interp_point_bottom = 0;
+
+	/*
+	 * a rectangular region within the chroma plane of the "image".
+	 * Chroma pixels falling inside of this rectangle belongs to the ROI
+	 */
+	int32 chroma_bound_left = 0;
+	int32 chroma_bound_right = 0;
+	int32 chroma_bound_top = 0;
+	int32 chroma_bound_bottom = 0;
+
+	/*
+	 * number of chroma pixels to replicate on the left, right,
+	 * top and bottom edge of the ROI.
+	 */
+	int32 chroma_repeat_left = 0;
+	int32 chroma_repeat_right = 0;
+	int32 chroma_repeat_top = 0;
+	int32 chroma_repeat_bottom = 0;
+
+	/*
+	 * number of luma pixels to replicate on the left, right,
+	 * top and bottom edge of the ROI.
+	 */
+	int32 luma_repeat_left = 0;
+	int32 luma_repeat_right = 0;
+	int32 luma_repeat_top = 0;
+	int32 luma_repeat_bottom = 0;
+
+	boolean chroma_edge_enable;
+
+	uint32 _is_scale_enabled = 0;
+	uint32 _is_yuv_offsite_vertical = 0;
+
+	/* fg edge duplicate */
+	reg = 0x0;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {	/* if scaling enabled */
+
+		_is_scale_enabled = 1;
+
+		/*
+		 * if rotation mode involves a 90 deg rotation, flip
+		 * dst_roi_width with dst_roi_height.
+		 * Scaling ratios is based on source ROI dimensions, and
+		 * dst ROI dimensions before rotation.
+		 */
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width = iBuf->roi.dst_height;
+			dst_roi_height = iBuf->roi.dst_width;
+		} else {
+			dst_roi_width = iBuf->roi.dst_width;
+			dst_roi_height = iBuf->roi.dst_height;
+		}
+
+		/*
+		 * Find out the luma pixels needed for scaling in the
+		 * x direction (LEFT and RIGHT).  Locations of pixels are
+		 * relative to the ROI. Upper-left corner of ROI corresponds
+		 * to coordinates (0,0). Also set the number of luma pixel
+		 * to repeat.
+		 */
+		if (iBuf->roi.width > 3 * dst_roi_width) {
+			/* scale factor < 1/3 */
+			luma_interp_point_left = 0;
+			luma_interp_point_right = (iBuf->roi.width - 1);
+			luma_repeat_left = 0;
+			luma_repeat_right = 0;
+		} else if (iBuf->roi.width == 3 * dst_roi_width) {
+			/* scale factor == 1/3 */
+			luma_interp_point_left = 0;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+			luma_repeat_left = 0;
+			luma_repeat_right = 1;
+		} else if ((iBuf->roi.width > dst_roi_width) &&
+			   (iBuf->roi.width < 3 * dst_roi_width)) {
+			/* 1/3 < scale factor < 1 */
+			luma_interp_point_left = -1;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+			luma_repeat_left = 1;
+			luma_repeat_right = 1;
+		}
+
+		else if (iBuf->roi.width == dst_roi_width) {
+			/* scale factor == 1 */
+			luma_interp_point_left = -1;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+			luma_repeat_left = 1;
+			luma_repeat_right = 2;
+		} else {	/* (iBuf->roi.width < dst_roi_width) */
+			  /* scale factor > 1 */
+			luma_interp_point_left = -2;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+			luma_repeat_left = 2;
+			luma_repeat_right = 2;
+		}
+
+		/*
+		 * Find out the number of pixels needed for scaling in the
+		 * y direction (TOP and BOTTOM).  Locations of pixels are
+		 * relative to the ROI. Upper-left corner of ROI corresponds
+		 * to coordinates (0,0). Also set the number of luma pixel
+		 * to repeat.
+		 */
+		if (iBuf->roi.height > 3 * dst_roi_height) {
+			/* scale factor < 1/3 */
+			luma_interp_point_top = 0;
+			luma_interp_point_bottom = (iBuf->roi.height - 1);
+			luma_repeat_top = 0;
+			luma_repeat_bottom = 0;
+		} else if (iBuf->roi.height == 3 * dst_roi_height) {
+			/* scale factor == 1/3 */
+			luma_interp_point_top = 0;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+			luma_repeat_top = 0;
+			luma_repeat_bottom = 1;
+		} else if ((iBuf->roi.height > dst_roi_height) &&
+			   (iBuf->roi.height < 3 * dst_roi_height)) {
+			/* 1/3 < scale factor < 1 */
+			luma_interp_point_top = -1;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+			luma_repeat_top = 1;
+			luma_repeat_bottom = 1;
+		} else if (iBuf->roi.height == dst_roi_height) {
+			/* scale factor == 1 */
+			luma_interp_point_top = -1;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+			luma_repeat_top = 1;
+			luma_repeat_bottom = 2;
+		} else {	/* (iBuf->roi.height < dst_roi_height) */
+			 /* scale factor > 1 */
+			luma_interp_point_top = -2;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+			luma_repeat_top = 2;
+			luma_repeat_bottom = 2;
+		}
+	}			/* if (iBuf->scale.scale_flag) */
+	else {			/* scaling disabled */
+		/*
+		 * Since no scaling needed, Tile Fetch does not require any
+		 * more luma pixel than what the ROI contains.
+		 */
+		luma_interp_point_left = (int32) 0;
+		luma_interp_point_right = (int32) (iBuf->roi.width - 1);
+		luma_interp_point_top = (int32) 0;
+		luma_interp_point_bottom = (int32) (iBuf->roi.height - 1);
+
+		luma_repeat_left = 0;
+		luma_repeat_right = 0;
+		luma_repeat_top = 0;
+		luma_repeat_bottom = 0;
+	}
+
+	/* After adding the ROI offsets, we have locations of
+	 * luma_interp_points relative to the image.
+	 */
+	luma_interp_point_left += (int32) (iBuf->roi.x);
+	luma_interp_point_right += (int32) (iBuf->roi.x);
+	luma_interp_point_top += (int32) (iBuf->roi.y);
+	luma_interp_point_bottom += (int32) (iBuf->roi.y);
+
+	/*
+	 * After adding the ROI offsets, we have locations of
+	 * chroma_interp_points relative to the image.
+	 */
+	chroma_interp_point_left = luma_interp_point_left;
+	chroma_interp_point_right = luma_interp_point_right;
+	chroma_interp_point_top = luma_interp_point_top;
+	chroma_interp_point_bottom = luma_interp_point_bottom;
+
+	chroma_edge_enable = TRUE;
+	/* find out which chroma pixels are needed for chroma upsampling. */
+	switch (iBuf->mdpImg.imgType) {
+		/*
+		 * cosite in horizontal axis
+		 * fully sampled in vertical axis
+		 */
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_YCRYCB_H2V1:
+		/* floor( luma_interp_point_left / 2 ); */
+		chroma_interp_point_left = luma_interp_point_left >> 1;
+		/* floor( ( luma_interp_point_right + 1 ) / 2 ); */
+		chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+		chroma_interp_point_top = luma_interp_point_top;
+		chroma_interp_point_bottom = luma_interp_point_bottom;
+		break;
+
+		/*
+		 * cosite in horizontal axis
+		 * offsite in vertical axis
+		 */
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		/* floor( luma_interp_point_left / 2) */
+		chroma_interp_point_left = luma_interp_point_left >> 1;
+
+		/* floor( ( luma_interp_point_right + 1 )/ 2 ) */
+		chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+		/* floor( (luma_interp_point_top - 1 ) / 2 ) */
+		chroma_interp_point_top = (luma_interp_point_top - 1) >> 1;
+
+		/* floor( ( luma_interp_point_bottom + 1 ) / 2 ) */
+		chroma_interp_point_bottom =
+		    (luma_interp_point_bottom + 1) >> 1;
+
+		_is_yuv_offsite_vertical = 1;
+		break;
+
+	default:
+		chroma_edge_enable = FALSE;
+		chroma_interp_point_left = luma_interp_point_left;
+		chroma_interp_point_right = luma_interp_point_right;
+		chroma_interp_point_top = luma_interp_point_top;
+		chroma_interp_point_bottom = luma_interp_point_bottom;
+
+		break;
+	}
+
+	/* only if the image type is in YUV domain, we calculate chroma edge */
+	if (chroma_edge_enable) {
+		/* Defines which chroma pixels belongs to the roi */
+		switch (iBuf->mdpImg.imgType) {
+			/*
+			 * Cosite in horizontal direction, and fully sampled
+			 * in vertical direction.
+			 */
+		case MDP_Y_CBCR_H2V1:
+		case MDP_Y_CRCB_H2V1:
+		case MDP_YCRYCB_H2V1:
+			/*
+			 * width of chroma ROI is 1/2 of size of luma ROI
+			 * height of chroma ROI same as size of luma ROI
+			 */
+			chroma_bound_left = iBuf->roi.x / 2;
+
+			/* there are half as many chroma pixel as luma pixels */
+			chroma_bound_right =
+			    (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+			chroma_bound_top = iBuf->roi.y;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1);
+			break;
+
+		case MDP_Y_CBCR_H2V2:
+		case MDP_Y_CRCB_H2V2:
+			/*
+			 * cosite in horizontal dir, and offsite in vertical dir
+			 * width of chroma ROI is 1/2 of size of luma ROI
+			 * height of chroma ROI is 1/2 of size of luma ROI
+			 */
+
+			chroma_bound_left = iBuf->roi.x / 2;
+			chroma_bound_right =
+			    (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+			chroma_bound_top = iBuf->roi.y / 2;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1) / 2;
+			break;
+
+		default:
+			/*
+			 * If no valid chroma sub-sampling format specified,
+			 * assume 4:4:4 ( i.e. fully sampled).  Set ROI
+			 * boundaries for chroma same as ROI boundaries for
+			 * luma.
+			 */
+			chroma_bound_left = iBuf->roi.x;
+			chroma_bound_right = iBuf->roi.width + iBuf->roi.x - 1;
+			chroma_bound_top = iBuf->roi.y;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1);
+			break;
+		}
+
+		/*
+		 * Knowing which chroma pixels are needed, and which chroma
+		 * pixels belong to the ROI (i.e. available for fetching ),
+		 * calculate how many chroma pixels Tile Fetch needs to
+		 * duplicate.  If any required chroma pixels falls outside
+		 * of the ROI, Tile Fetch must obtain them by replicating
+		 * pixels.
+		 */
+		if (chroma_bound_left > chroma_interp_point_left)
+			chroma_repeat_left =
+			    chroma_bound_left - chroma_interp_point_left;
+		else
+			chroma_repeat_left = 0;
+
+		if (chroma_interp_point_right > chroma_bound_right)
+			chroma_repeat_right =
+			    chroma_interp_point_right - chroma_bound_right;
+		else
+			chroma_repeat_right = 0;
+
+		if (chroma_bound_top > chroma_interp_point_top)
+			chroma_repeat_top =
+			    chroma_bound_top - chroma_interp_point_top;
+		else
+			chroma_repeat_top = 0;
+
+		if (chroma_interp_point_bottom > chroma_bound_bottom)
+			chroma_repeat_bottom =
+			    chroma_interp_point_bottom - chroma_bound_bottom;
+		else
+			chroma_repeat_bottom = 0;
+
+		if (_is_scale_enabled && (iBuf->roi.height == 1)
+		    && _is_yuv_offsite_vertical) {
+			chroma_repeat_bottom = 3;
+			chroma_repeat_top = 0;
+		}
+	}
+	/* make sure chroma repeats are non-negative */
+	if ((chroma_repeat_left < 0) || (chroma_repeat_right < 0) ||
+	    (chroma_repeat_top < 0) || (chroma_repeat_bottom < 0))
+		return -1;
+
+	/* make sure chroma repeats are no larger than 3 pixels */
+	if ((chroma_repeat_left > 3) || (chroma_repeat_right > 3) ||
+	    (chroma_repeat_top > 3) || (chroma_repeat_bottom > 3))
+		return -1;
+
+	/* make sure luma repeats are non-negative */
+	if ((luma_repeat_left < 0) || (luma_repeat_right < 0) ||
+	    (luma_repeat_top < 0) || (luma_repeat_bottom < 0))
+		return -1;
+
+	/* make sure luma repeats are no larger than 3 pixels */
+	if ((luma_repeat_left > 3) || (luma_repeat_right > 3) ||
+	    (luma_repeat_top > 3) || (luma_repeat_bottom > 3))
+		return -1;
+
+	/* write chroma_repeat_left to register */
+	reg |= (chroma_repeat_left & 3) << MDP_LEFT_CHROMA;
+
+	/* write chroma_repeat_right to register */
+	reg |= (chroma_repeat_right & 3) << MDP_RIGHT_CHROMA;
+
+	/* write chroma_repeat_top to register */
+	reg |= (chroma_repeat_top & 3) << MDP_TOP_CHROMA;
+
+	/* write chroma_repeat_bottom to register */
+	reg |= (chroma_repeat_bottom & 3) << MDP_BOTTOM_CHROMA;
+
+	/* write luma_repeat_left to register */
+	reg |= (luma_repeat_left & 3) << MDP_LEFT_LUMA;
+
+	/* write luma_repeat_right to register */
+	reg |= (luma_repeat_right & 3) << MDP_RIGHT_LUMA;
+
+	/* write luma_repeat_top to register */
+	reg |= (luma_repeat_top & 3) << MDP_TOP_LUMA;
+
+	/* write luma_repeat_bottom to register */
+	reg |= (luma_repeat_bottom & 3) << MDP_BOTTOM_LUMA;
+
+	/* done with reg */
+	*dup = reg;
+
+	/* bg edge duplicate */
+	reg = 0x0;
+
+	switch (iBuf->ibuf_type) {
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		/*
+		 * Edge condition for MDP_Y_CRCB/CBCR_H2V2 cosite only.
+		 * For 420 cosite, 1 chroma replicated on all sides except
+		 * left, so reg 101b8 should be 0x0209. For 420 offsite,
+		 * 1 chroma replicated all sides.
+		 */
+		if (iBuf->roi.lcd_y == 0) {
+			reg |= BIT(MDP_TOP_CHROMA);
+		}
+
+		if ((iBuf->roi.lcd_y + iBuf->roi.dst_height) ==
+		    iBuf->ibuf_height) {
+			reg |= BIT(MDP_BOTTOM_CHROMA);
+		}
+
+		if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+		     iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+			reg |= BIT(MDP_RIGHT_CHROMA);
+		}
+
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_YCRYCB_H2V1:
+		if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+		     iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+			reg |= BIT(MDP_RIGHT_CHROMA);
+		}
+		break;
+	default:
+		break;
+	}
+
+	*dup2 = reg;
+
+	return 0;
+}
+
+#define ADJUST_IP		/* for 1/3 scale factor fix */
+
+static int mdp_calc_scale_params(
+/* ROI origin coordinate for the dimension */
+					uint32 org,
+/* src ROI dimension */
+					uint32 dim_in,
+/* scaled ROI dimension*/
+					uint32 dim_out,
+/* is this ROI width dimension? */
+					boolean is_W,
+/* initial phase location address */
+					int32 *phase_init_ptr,
+/* phase increment location address */
+					uint32 *phase_step_ptr,
+/* ROI start over-fetch location address */
+					uint32 *num_repl_beg_ptr,
+/* ROI end over-fetch location address */
+					uint32 *num_repl_end_ptr)
+{
+	boolean rpa_on = FALSE;
+	int init_phase = 0;
+	uint32 beg_of = 0;
+	uint32 end_of = 0;
+	uint64 numer = 0;
+	uint64 denom = 0;
+	/*uint64 inverter = 1; */
+	int64 point5 = 1;
+	int64 one = 1;
+	int64 k1, k2, k3, k4;	/* linear equation coefficients */
+	uint64 int_mask;
+	uint64 fract_mask;
+	uint64 Os;
+	int64 Osprime;
+	int64 Od;
+	int64 Odprime;
+	int64 Oreq;
+	uint64 Es;
+	uint64 Ed;
+	uint64 Ereq;
+#ifdef ADJUST_IP
+	int64 IP64;
+	int64 delta;
+#endif
+	uint32 mult;
+
+	/*
+	 * The phase accumulator should really be rational for all cases in a
+	 * general purpose polyphase scaler for a tiled architecture with
+	 * non-zero * origin capability because there is no way to represent
+	 * certain scale factors in fixed point regardless of precision.
+	 * The error incurred in attempting to use fixed point is most
+	 * eggregious for SF where 1/SF is an integral multiple of 1/3.
+	 *
+	 * However, since the MDP2 has already been committed to HW, we
+	 * only use the rational phase accumulator (RPA) when 1/SF is an
+	 * integral multiple of 1/3.  This will help minimize regressions in
+	 * matching the HW to the C-Sim.
+	 */
+	/*
+	 * Set the RPA flag for this dimension.
+	 *
+	 * In order for 1/SF (dim_in/dim_out) to be an integral multiple of
+	 * 1/3, dim_out must be an integral multiple of 3.
+	 */
+	if (!(dim_out % 3)) {
+		mult = dim_out / 3;
+		rpa_on = (!(dim_in % mult));
+	}
+
+	numer = dim_out;
+	denom = dim_in;
+
+	/*
+	 * convert to U30.34 before division
+	 *
+	 * The K vectors carry 4 extra bits of precision
+	 * and are rounded.
+	 *
+	 * We initially go 5 bits over then round by adding
+	 * 1 and right shifting by 1
+	 * so final result is U31.33
+	 */
+	numer <<= PQF_PLUS_5;
+
+	/* now calculate the scale factor (aka k3) */
+	k3 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+	/* check scale factor for legal range [0.25 - 4.0] */
+	if (((k3 >> 4) < (1LL << PQF_MINUS_2)) ||
+	    ((k3 >> 4) > (1LL << PQF_PLUS_2))) {
+		return -1;
+	}
+
+	/* calculate inverse scale factor (aka k1) for phase init */
+	numer = dim_in;
+	denom = dim_out;
+	numer <<= PQF_PLUS_5;
+	k1 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+	/*
+	 * calculate initial phase and ROI overfetch
+	 */
+	/* convert point5 & one to S39.24 (will always be positive) */
+	point5 <<= (PQF_PLUS_4 - 1);
+	one <<= PQF_PLUS_4;
+	k2 = ((k1 - one) >> 1);
+	init_phase = (int)(k2 >> 4);
+	k4 = ((k3 - one) >> 1);
+	if (k3 == one) {
+		/* the simple case; SF = 1.0 */
+		beg_of = 1;
+		end_of = 2;
+	} else {
+		/* calculate the masks */
+		fract_mask = one - 1;
+		int_mask = ~fract_mask;
+
+		if (!rpa_on) {
+			/*
+			 * FIXED POINT IMPLEMENTATION
+			 */
+			if (!org) {
+				/* A fairly simple case; ROI origin = 0 */
+				if (k1 < one) {
+					/* upscaling */
+					beg_of = end_of = 2;
+				}
+				/* 0.33 <= SF < 1.0 */
+				else if (k1 < (3LL << PQF_PLUS_4))
+					beg_of = end_of = 1;
+				/* 0.33 == SF */
+				else if (k1 == (3LL << PQF_PLUS_4)) {
+					beg_of = 0;
+					end_of = 1;
+				}
+				/* 0.25 <= SF < 0.33 */
+				else
+					beg_of = end_of = 0;
+			} else {
+				/*
+				 * The complicated case; ROI origin != 0
+				 * init_phase needs to be adjusted
+				 * OF is also position dependent
+				 */
+
+				/* map (org - .5) into destination space */
+				Os = ((uint64) org << 1) - 1;
+				Od = ((k3 * Os) >> 1) + k4;
+
+				/* take the ceiling */
+				Odprime = (Od & int_mask);
+				if (Odprime != Od)
+					Odprime += one;
+
+				/* now map that back to source space */
+				Osprime = (k1 * (Odprime >> PQF_PLUS_4)) + k2;
+
+				/* then floor & decrement to calculate the required
+				   starting coordinate */
+				Oreq = (Osprime & int_mask) - one;
+
+				/* calculate end coord in destination space then map to
+				   source space */
+				Ed = Odprime +
+				    ((uint64) dim_out << PQF_PLUS_4) - one;
+				Es = (k1 * (Ed >> PQF_PLUS_4)) + k2;
+
+				/* now floor & increment by 2 to calculate the required
+				   ending coordinate */
+				Ereq = (Es & int_mask) + (one << 1);
+
+				/* calculate initial phase */
+#ifdef ADJUST_IP
+
+				IP64 = Osprime - Oreq;
+				delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+				IP64 -= delta;
+
+				/* limit to valid range before the left shift */
+				delta = (IP64 & (1LL << 63)) ? 4 : -4;
+				delta <<= PQF_PLUS_4;
+				while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+					IP64 += delta;
+
+				/* right shift to account for extra bits of precision */
+				init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+				/* just calculate the real initial phase */
+				init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+				/* calculate the overfetch */
+				beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+				end_of =
+				    (uint32) (Ereq >> PQF_PLUS_4) - (org +
+								     dim_in -
+								     1);
+			}
+		} else {
+			/*
+			 * RPA IMPLEMENTATION
+			 *
+			 * init_phase needs to be calculated in all RPA_on cases
+			 * because it's a numerator, not a fixed point value.
+			 */
+
+			/* map (org - .5) into destination space */
+			Os = ((uint64) org << PQF_PLUS_4) - point5;
+			Od = mdp_do_div((dim_out * (Os + point5)),
+					dim_in) - point5;
+
+			/* take the ceiling */
+			Odprime = (Od & int_mask);
+			if (Odprime != Od)
+				Odprime += one;
+
+			/* now map that back to source space */
+			Osprime =
+			    mdp_do_div((dim_in * (Odprime + point5)),
+				       dim_out) - point5;
+
+			/* then floor & decrement to calculate the required
+			   starting coordinate */
+			Oreq = (Osprime & int_mask) - one;
+
+			/* calculate end coord in destination space then map to
+			   source space */
+			Ed = Odprime + ((uint64) dim_out << PQF_PLUS_4) - one;
+			Es = mdp_do_div((dim_in * (Ed + point5)),
+					dim_out) - point5;
+
+			/* now floor & increment by 2 to calculate the required
+			   ending coordinate */
+			Ereq = (Es & int_mask) + (one << 1);
+
+			/* calculate initial phase */
+
+#ifdef ADJUST_IP
+
+			IP64 = Osprime - Oreq;
+			delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+			IP64 -= delta;
+
+			/* limit to valid range before the left shift */
+			delta = (IP64 & (1LL << 63)) ? 4 : -4;
+			delta <<= PQF_PLUS_4;
+			while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+				IP64 += delta;
+
+			/* right shift to account for extra bits of precision */
+			init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+			/* just calculate the real initial phase */
+			init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+			/* calculate the overfetch */
+			beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+			end_of =
+			    (uint32) (Ereq >> PQF_PLUS_4) - (org + dim_in - 1);
+		}
+	}
+
+	/* return the scale parameters */
+	*phase_init_ptr = init_phase;
+	*phase_step_ptr = (uint32) (k1 >> 4);
+	*num_repl_beg_ptr = beg_of;
+	*num_repl_end_ptr = end_of;
+
+	return 0;
+}
+
+static uint8 *mdp_adjust_rot_addr(MDPIBUF *iBuf, uint8 *addr, uint32 uv)
+{
+	uint32 dest_ystride = iBuf->ibuf_width * iBuf->bpp;
+	uint32 h_slice = 1;
+
+	if (uv && ((iBuf->ibuf_type == MDP_Y_CBCR_H2V2) ||
+		(iBuf->ibuf_type == MDP_Y_CRCB_H2V2)))
+		h_slice = 2;
+
+	if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_ROT90) ^
+	    MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_LR)) {
+		addr =
+		    addr + (iBuf->roi.dst_width -
+			    MIN(16, iBuf->roi.dst_width)) * iBuf->bpp;
+	}
+	if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_UD)) {
+		addr =
+		    addr + ((iBuf->roi.dst_height -
+			MIN(16, iBuf->roi.dst_height))/h_slice) * dest_ystride;
+	}
+
+	return addr;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+	uint32 dst_roi_width_scale;
+	uint32 dst_roi_height_scale;
+	boolean use_pr;
+	uint32 phasex_step = 0;
+	uint32 phasey_step = 0;
+	int32 phasex_init = 0;
+	int32 phasey_init = 0;
+	uint32 lines_dup = 0;
+	uint32 lines_dup_bg = 0;
+	uint32 dummy;
+	uint32 mdp_blur = 0;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width_scale = dst_roi_height;
+			dst_roi_height_scale = dst_roi_width;
+		} else {
+			dst_roi_width_scale = dst_roi_width;
+			dst_roi_height_scale = dst_roi_height;
+		}
+
+		mdp_blur = iBuf->mdpImg.mdpOp & MDPOP_BLUR;
+
+		if ((dst_roi_width_scale != iBuf->roi.width) ||
+		    (dst_roi_height_scale != iBuf->roi.height) ||
+			mdp_blur) {
+			*pppop_reg_ptr |=
+			    (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+		/* let's use SHIM logic to calculate the partial ROI scaling */
+#if 0
+			phasex_step =
+			    (uint32) mdp_do_div(0x20000000 * iBuf->roi.width,
+						dst_roi_width_scale);
+			phasey_step =
+			    (uint32) mdp_do_div(0x20000000 * iBuf->roi.height,
+						dst_roi_height_scale);
+
+/*
+    phasex_step= ((long long) iBuf->roi.width * 0x20000000)/dst_roi_width_scale;
+    phasey_step= ((long long)iBuf->roi.height * 0x20000000)/dst_roi_height_scale;
+*/
+
+			phasex_init =
+			    (((long long)phasex_step - 0x20000000) >> 1);
+			phasey_init =
+			    (((long long)phasey_step - 0x20000000) >> 1);
+
+#else
+			mdp_calc_scale_params(iBuf->roi.x, iBuf->roi.width,
+					      dst_roi_width_scale, 1,
+					      &phasex_init, &phasex_step,
+					      &dummy, &dummy);
+			mdp_calc_scale_params(iBuf->roi.y, iBuf->roi.height,
+					      dst_roi_height_scale, 0,
+					      &phasey_init, &phasey_step,
+					      &dummy, &dummy);
+#endif
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+				 phasex_init);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+				 phasey_init);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+				 phasex_step);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+				 phasey_step);
+
+			use_pr = (inputRGB) && (outputRGB);
+
+			if ((dst_roi_width_scale > iBuf->roi.width) ||
+			    (dst_roi_height_scale > iBuf->roi.height)) {
+				if ((use_pr)
+				    && (mdp_curr_up_scale_xy !=
+					MDP_PR_SCALE_UP)) {
+					mdp_load_pr_upscale_table();
+					mdp_curr_up_scale_xy = MDP_PR_SCALE_UP;
+				} else if ((!use_pr)
+					   && (mdp_curr_up_scale_xy !=
+					       MDP_BC_SCALE_UP)) {
+					mdp_load_bc_upscale_table();
+					mdp_curr_up_scale_xy = MDP_BC_SCALE_UP;
+				}
+			}
+
+			if (mdp_blur) {
+				load_scale_table(mdp_gaussian_blur_table,
+					ARRAY_SIZE(mdp_gaussian_blur_table));
+				mdp_curr_down_scale_x = MDP_SCALE_BLUR;
+				mdp_curr_down_scale_y = MDP_SCALE_BLUR;
+			}
+
+			/* 0.2 < x <= 1 scaling factor */
+			if ((dst_roi_width_scale <= iBuf->roi.width) &&
+				!mdp_blur) {
+				if (((dst_roi_width_scale * 10) /
+				     iBuf->roi.width) > 8) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT8_1)) {
+						mdp_load_pr_downscale_table_x_point8TO1
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT8_1;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT8_1)) {
+						mdp_load_bc_downscale_table_x_point8TO1
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT8_1;
+					}
+				} else
+				    if (((dst_roi_width_scale * 10) /
+					 iBuf->roi.width) > 6) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT6_POINT8)) {
+						mdp_load_pr_downscale_table_x_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT6_POINT8;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT6_POINT8))
+					{
+						mdp_load_bc_downscale_table_x_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT6_POINT8;
+					}
+				} else
+				    if (((dst_roi_width_scale * 10) /
+					 iBuf->roi.width) > 4) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT4_POINT6)) {
+						mdp_load_pr_downscale_table_x_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT4_POINT6;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT4_POINT6))
+					{
+						mdp_load_bc_downscale_table_x_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT4_POINT6;
+					}
+				} else {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT2_POINT4)) {
+						mdp_load_pr_downscale_table_x_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT2_POINT4;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT2_POINT4))
+					{
+						mdp_load_bc_downscale_table_x_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT2_POINT4;
+					}
+				}
+			}
+			/* 0.2 < y <= 1 scaling factor */
+			if ((dst_roi_height_scale <= iBuf->roi.height) &&
+				!mdp_blur) {
+				if (((dst_roi_height_scale * 10) /
+				     iBuf->roi.height) > 8) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT8_1)) {
+						mdp_load_pr_downscale_table_y_point8TO1
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT8_1;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT8_1)) {
+						mdp_load_bc_downscale_table_y_point8TO1
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT8_1;
+					}
+				} else
+				    if (((dst_roi_height_scale * 10) /
+					 iBuf->roi.height) > 6) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT6_POINT8)) {
+						mdp_load_pr_downscale_table_y_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT6_POINT8;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT6_POINT8))
+					{
+						mdp_load_bc_downscale_table_y_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT6_POINT8;
+					}
+				} else
+				    if (((dst_roi_height_scale * 10) /
+					 iBuf->roi.height) > 4) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT4_POINT6)) {
+						mdp_load_pr_downscale_table_y_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT4_POINT6;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT4_POINT6))
+					{
+						mdp_load_bc_downscale_table_y_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT4_POINT6;
+					}
+				} else {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT2_POINT4)) {
+						mdp_load_pr_downscale_table_y_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT2_POINT4;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT2_POINT4))
+					{
+						mdp_load_bc_downscale_table_y_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT2_POINT4;
+					}
+				}
+			}
+		} else {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+		}
+	}
+	/* setting edge condition here after scaling check */
+	if (mdp_get_edge_cond(iBuf, &lines_dup, &lines_dup_bg))
+		printk(KERN_ERR "msm_fb: mdp_get_edge_cond() error!\n");
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01b8, lines_dup);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01bc, lines_dup_bg);
+}
+
+void mdp_init_scale_table(void)
+{
+	mdp_curr_up_scale_xy = MDP_INIT_SCALE;
+	mdp_curr_down_scale_x = MDP_INIT_SCALE;
+	mdp_curr_down_scale_y = MDP_INIT_SCALE;
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+	*src0 += (x + y * width) * bpp;
+
+	/* if it's dest/bg buffer, we need to adjust it for rotation */
+	if (layer != 0)
+		*src0 = mdp_adjust_rot_addr(iBuf, *src0, 0);
+
+	if (*src1) {
+		/*
+		 * MDP_Y_CBCR_H2V2/MDP_Y_CRCB_H2V2 cosite for now
+		 * we need to shift x direction same as y dir for offsite
+		 */
+		*src1 +=
+		    ((x / h_slice) * h_slice +
+		     ((y == 0) ? 0 : ((y + 1) / v_slice - 1) * width)) * bpp;
+
+		/* if it's dest/bg buffer, we need to adjust it for rotation */
+		if (layer != 0)
+			*src1 = mdp_adjust_rot_addr(iBuf, *src1, 1);
+	}
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+	if (perPixelAlpha) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+	} else {
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.alpha == 0xff)) {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+		}
+
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+			*pppop_reg_ptr |=
+			    PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+			    PPP_OP_BLEND_CONSTANT_ALPHA |
+			    PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+			    PPP_BLEND_CALPHA_TRNASP;
+
+			*alpha = iBuf->mdpImg.alpha;
+			*tpVal = iBuf->mdpImg.tpVal;
+		} else {
+			if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+				*pppop_reg_ptr |= PPP_OP_ROT_ON |
+				    PPP_OP_BLEND_ON |
+				    PPP_OP_BLEND_SRCPIXEL_TRANSP;
+				*tpVal = iBuf->mdpImg.tpVal;
+			} else if (iBuf->mdpImg.mdpOp & MDPOP_ALPHAB) {
+				*pppop_reg_ptr |= PPP_OP_ROT_ON |
+				    PPP_OP_BLEND_ON |
+				    PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+				    PPP_OP_BLEND_CONSTANT_ALPHA;
+				*alpha = iBuf->mdpImg.alpha;
+			}
+		}
+	}
+}
diff --git a/drivers/staging/msm/mdp_ppp_v31.c b/drivers/staging/msm/mdp_ppp_v31.c
new file mode 100644
index 00000000000..76495dbe4e6
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v31.c
@@ -0,0 +1,828 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_SCALE_COEFF_NUM      32
+#define MDP_SCALE_0P2_TO_0P4_INDEX 0
+#define MDP_SCALE_0P4_TO_0P6_INDEX 32
+#define MDP_SCALE_0P6_TO_0P8_INDEX 64
+#define MDP_SCALE_0P8_TO_8P0_INDEX 96
+#define MDP_SCALE_COEFF_MASK 0x3ff
+
+#define MDP_SCALE_PR  0
+#define MDP_SCALE_FIR 1
+
+static uint32 mdp_scale_0p8_to_8p0_mode;
+static uint32 mdp_scale_0p6_to_0p8_mode;
+static uint32 mdp_scale_0p4_to_0p6_mode;
+static uint32 mdp_scale_0p2_to_0p4_mode;
+
+/* -------- All scaling range, "pixel repeat" -------- */
+static int16 mdp_scale_pixel_repeat_C0[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C1[MDP_SCALE_COEFF_NUM] = {
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511
+};
+
+static int16 mdp_scale_pixel_repeat_C2[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C3[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* --------------------------- FIR ------------------------------------- */
+/* -------- Downscale, ranging from 0.8x to 8.0x of original size -------- */
+
+static int16 mdp_scale_0p8_to_8p0_C0[MDP_SCALE_COEFF_NUM] = {
+	0, -7, -13, -19, -24, -28, -32, -34, -37, -39,
+	-40, -41, -41, -41, -40, -40, -38, -37, -35, -33,
+	-31, -29, -26, -24, -21, -18, -15, -13, -10, -7,
+	-5, -2
+};
+
+static int16 mdp_scale_0p8_to_8p0_C1[MDP_SCALE_COEFF_NUM] = {
+	511, 507, 501, 494, 485, 475, 463, 450, 436, 422,
+	405, 388, 370, 352, 333, 314, 293, 274, 253, 233,
+	213, 193, 172, 152, 133, 113, 95, 77, 60, 43,
+	28, 13
+};
+
+static int16 mdp_scale_0p8_to_8p0_C2[MDP_SCALE_COEFF_NUM] = {
+	0, 13, 28, 43, 60, 77, 95, 113, 133, 152,
+	172, 193, 213, 233, 253, 274, 294, 314, 333, 352,
+	370, 388, 405, 422, 436, 450, 463, 475, 485, 494,
+	501, 507,
+};
+
+static int16 mdp_scale_0p8_to_8p0_C3[MDP_SCALE_COEFF_NUM] = {
+	0, -2, -5, -7, -10, -13, -15, -18, -21, -24,
+	-26, -29, -31, -33, -35, -37, -38, -40, -40, -41,
+	-41, -41, -40, -39, -37, -34, -32, -28, -24, -19,
+	-13, -7
+};
+
+/* -------- Downscale, ranging from 0.6x to 0.8x of original size -------- */
+
+static int16 mdp_scale_0p6_to_0p8_C0[MDP_SCALE_COEFF_NUM] = {
+	104, 96, 89, 82, 75, 68, 61, 55, 49, 43,
+	38, 33, 28, 24, 20, 16, 12, 9, 6, 4,
+	2, 0, -2, -4, -5, -6, -7, -7, -8, -8,
+	-8, -8
+};
+
+static int16 mdp_scale_0p6_to_0p8_C1[MDP_SCALE_COEFF_NUM] = {
+	303, 303, 302, 300, 298, 296, 293, 289, 286, 281,
+	276, 270, 265, 258, 252, 245, 238, 230, 223, 214,
+	206, 197, 189, 180, 172, 163, 154, 145, 137, 128,
+	120, 112
+};
+
+static int16 mdp_scale_0p6_to_0p8_C2[MDP_SCALE_COEFF_NUM] = {
+	112, 120, 128, 137, 145, 154, 163, 172, 180, 189,
+	197, 206, 214, 223, 230, 238, 245, 252, 258, 265,
+	270, 276, 281, 286, 289, 293, 296, 298, 300, 302,
+	303, 303
+};
+
+static int16 mdp_scale_0p6_to_0p8_C3[MDP_SCALE_COEFF_NUM] = {
+	-8, -8, -8, -8, -7, -7, -6, -5, -4, -2,
+	0, 2, 4, 6, 9, 12, 16, 20, 24, 28,
+	33, 38, 43, 49, 55, 61, 68, 75, 82, 89,
+	96, 104
+};
+
+/* -------- Downscale, ranging from 0.4x to 0.6x of original size -------- */
+
+static int16 mdp_scale_0p4_to_0p6_C0[MDP_SCALE_COEFF_NUM] = {
+	136, 132, 128, 123, 119, 115, 111, 107, 103, 98,
+	95, 91, 87, 84, 80, 76, 73, 69, 66, 62,
+	59, 57, 54, 50, 47, 44, 41, 39, 36, 33,
+	32, 29
+};
+
+static int16 mdp_scale_0p4_to_0p6_C1[MDP_SCALE_COEFF_NUM] = {
+	206, 205, 204, 204, 201, 200, 199, 197, 196, 194,
+	191, 191, 189, 185, 184, 182, 180, 178, 176, 173,
+	170, 168, 165, 162, 160, 157, 155, 152, 148, 146,
+	142, 140
+};
+
+static int16 mdp_scale_0p4_to_0p6_C2[MDP_SCALE_COEFF_NUM] = {
+	140, 142, 146, 148, 152, 155, 157, 160, 162, 165,
+	168, 170, 173, 176, 178, 180, 182, 184, 185, 189,
+	191, 191, 194, 196, 197, 199, 200, 201, 204, 204,
+	205, 206
+};
+
+static int16 mdp_scale_0p4_to_0p6_C3[MDP_SCALE_COEFF_NUM] = {
+	29, 32, 33, 36, 39, 41, 44, 47, 50, 54,
+	57, 59, 62, 66, 69, 73, 76, 80, 84, 87,
+	91, 95, 98, 103, 107, 111, 115, 119, 123, 128,
+	132, 136
+};
+
+/* -------- Downscale, ranging from 0.2x to 0.4x of original size -------- */
+
+static int16 mdp_scale_0p2_to_0p4_C0[MDP_SCALE_COEFF_NUM] = {
+	131, 131, 130, 129, 128, 127, 127, 126, 125, 125,
+	124, 123, 123, 121, 120, 119, 119, 118, 117, 117,
+	116, 115, 115, 114, 113, 112, 111, 110, 109, 109,
+	108, 107
+};
+
+static int16 mdp_scale_0p2_to_0p4_C1[MDP_SCALE_COEFF_NUM] = {
+	141, 140, 140, 140, 140, 139, 138, 138, 138, 137,
+	137, 137, 136, 137, 137, 137, 136, 136, 136, 135,
+	135, 135, 134, 134, 134, 134, 134, 133, 133, 132,
+	132, 132
+};
+
+static int16 mdp_scale_0p2_to_0p4_C2[MDP_SCALE_COEFF_NUM] = {
+	132, 132, 132, 133, 133, 134, 134, 134, 134, 134,
+	135, 135, 135, 136, 136, 136, 137, 137, 137, 136,
+	137, 137, 137, 138, 138, 138, 139, 140, 140, 140,
+	140, 141
+};
+
+static int16 mdp_scale_0p2_to_0p4_C3[MDP_SCALE_COEFF_NUM] = {
+	107, 108, 109, 109, 110, 111, 112, 113, 114, 115,
+	115, 116, 117, 117, 118, 119, 119, 120, 121, 123,
+	123, 124, 125, 125, 126, 127, 127, 128, 129, 130,
+	131, 131
+};
+
+static void mdp_update_scale_table(int index, int16 *c0, int16 *c1,
+				   int16 *c2, int16 *c3)
+{
+	int i, val;
+
+	for (i = 0; i < MDP_SCALE_COEFF_NUM; i++) {
+		val =
+		    ((MDP_SCALE_COEFF_MASK & c1[i]) << 16) |
+		    (MDP_SCALE_COEFF_MASK & c0[i]);
+		MDP_OUTP(MDP_PPP_SCALE_COEFF_LSBn(index), val);
+		val =
+		    ((MDP_SCALE_COEFF_MASK & c3[i]) << 16) |
+		    (MDP_SCALE_COEFF_MASK & c2[i]);
+		MDP_OUTP(MDP_PPP_SCALE_COEFF_MSBn(index), val);
+		index++;
+	}
+}
+
+void mdp_init_scale_table(void)
+{
+	mdp_scale_0p2_to_0p4_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P2_TO_0P4_INDEX,
+			       mdp_scale_0p2_to_0p4_C0,
+			       mdp_scale_0p2_to_0p4_C1,
+			       mdp_scale_0p2_to_0p4_C2,
+			       mdp_scale_0p2_to_0p4_C3);
+
+	mdp_scale_0p4_to_0p6_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P4_TO_0P6_INDEX,
+			       mdp_scale_0p4_to_0p6_C0,
+			       mdp_scale_0p4_to_0p6_C1,
+			       mdp_scale_0p4_to_0p6_C2,
+			       mdp_scale_0p4_to_0p6_C3);
+
+	mdp_scale_0p6_to_0p8_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P6_TO_0P8_INDEX,
+			       mdp_scale_0p6_to_0p8_C0,
+			       mdp_scale_0p6_to_0p8_C1,
+			       mdp_scale_0p6_to_0p8_C2,
+			       mdp_scale_0p6_to_0p8_C3);
+
+	mdp_scale_0p8_to_8p0_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P8_TO_8P0_INDEX,
+			       mdp_scale_0p8_to_8p0_C0,
+			       mdp_scale_0p8_to_8p0_C1,
+			       mdp_scale_0p8_to_8p0_C2,
+			       mdp_scale_0p8_to_8p0_C3);
+}
+
+static long long mdp_do_div(long long num, long long den)
+{
+	do_div(num, den);
+	return num;
+}
+
+#define SCALER_PHASE_BITS 29
+#define HAL_MDP_PHASE_STEP_2P50    0x50000000
+#define HAL_MDP_PHASE_STEP_1P66    0x35555555
+#define HAL_MDP_PHASE_STEP_1P25    0x28000000
+
+struct phase_val {
+	int phase_init_x;
+	int phase_init_y;
+	int phase_step_x;
+	int phase_step_y;
+};
+
+static void mdp_calc_scaleInitPhase_3p1(uint32 in_w,
+					uint32 in_h,
+					uint32 out_w,
+					uint32 out_h,
+					boolean is_rotate,
+					boolean is_pp_x,
+					boolean is_pp_y, struct phase_val *pval)
+{
+	uint64 dst_ROI_width;
+	uint64 dst_ROI_height;
+	uint64 src_ROI_width;
+	uint64 src_ROI_height;
+
+	/*
+	 * phase_step_x, phase_step_y, phase_init_x and phase_init_y
+	 * are represented in fixed-point, unsigned 3.29 format
+	 */
+	uint32 phase_step_x = 0;
+	uint32 phase_step_y = 0;
+	uint32 phase_init_x = 0;
+	uint32 phase_init_y = 0;
+	uint32 yscale_filter_sel, xscale_filter_sel;
+	uint32 scale_unit_sel_x, scale_unit_sel_y;
+
+	uint64 numerator, denominator;
+	uint64 temp_dim;
+
+	src_ROI_width = in_w;
+	src_ROI_height = in_h;
+	dst_ROI_width = out_w;
+	dst_ROI_height = out_h;
+
+	/* if there is a 90 degree rotation */
+	if (is_rotate) {
+		/* decide whether to use FIR or M/N for scaling */
+
+		/* if down-scaling by a factor smaller than 1/4 */
+		if (src_ROI_width > (4 * dst_ROI_height))
+			scale_unit_sel_x = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_x = 0;	/* use FIR scalar */
+
+		/* if down-scaling by a factor smaller than 1/4 */
+		if (src_ROI_height > (4 * dst_ROI_width))
+			scale_unit_sel_y = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_y = 0;	/* use FIR scalar */
+	} else {
+		/* decide whether to use FIR or M/N for scaling */
+
+		if (src_ROI_width > (4 * dst_ROI_width))
+			scale_unit_sel_x = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_x = 0;	/* use FIR scalar */
+
+		if (src_ROI_height > (4 * dst_ROI_height))
+			scale_unit_sel_y = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_y = 0;	/* use FIR scalar */
+
+	}
+
+	/* if there is a 90 degree rotation */
+	if (is_rotate) {
+		/* swap the width and height of dst ROI */
+		temp_dim = dst_ROI_width;
+		dst_ROI_width = dst_ROI_height;
+		dst_ROI_height = temp_dim;
+	}
+
+	/* calculate phase step for the x direction */
+
+	/* if destination is only 1 pixel wide, the value of phase_step_x
+	   is unimportant. Assigning phase_step_x to src ROI width
+	   as an arbitrary value. */
+	if (dst_ROI_width == 1)
+		phase_step_x = (uint32) ((src_ROI_width) << SCALER_PHASE_BITS);
+
+	/* if using FIR scalar */
+	else if (scale_unit_sel_x == 0) {
+
+		/* Calculate the quotient ( src_ROI_width - 1 ) / ( dst_ROI_width - 1)
+		   with u3.29 precision. Quotient is rounded up to the larger
+		   29th decimal point. */
+		numerator = (src_ROI_width - 1) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_width - 1);	/* never equals to 0 because of the "( dst_ROI_width == 1 ) case" */
+		phase_step_x = (uint32) mdp_do_div((numerator + denominator - 1), denominator);	/* divide and round up to the larger 29th decimal point. */
+
+	}
+
+	/* if M/N scalar */
+	else if (scale_unit_sel_x == 1) {
+		/* Calculate the quotient ( src_ROI_width ) / ( dst_ROI_width)
+		   with u3.29 precision. Quotient is rounded down to the
+		   smaller 29th decimal point. */
+		numerator = (src_ROI_width) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_width);
+		phase_step_x = (uint32) mdp_do_div(numerator, denominator);
+	}
+	/* calculate phase step for the y direction */
+
+	/* if destination is only 1 pixel wide, the value of
+	   phase_step_x is unimportant. Assigning phase_step_x
+	   to src ROI width as an arbitrary value. */
+	if (dst_ROI_height == 1)
+		phase_step_y = (uint32) ((src_ROI_height) << SCALER_PHASE_BITS);
+
+	/* if FIR scalar */
+	else if (scale_unit_sel_y == 0) {
+		/* Calculate the quotient ( src_ROI_height - 1 ) / ( dst_ROI_height - 1)
+		   with u3.29 precision. Quotient is rounded up to the larger
+		   29th decimal point. */
+		numerator = (src_ROI_height - 1) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_height - 1);	/* never equals to 0 because of the "( dst_ROI_height == 1 )" case */
+		phase_step_y = (uint32) mdp_do_div((numerator + denominator - 1), denominator);	/* Quotient is rounded up to the larger 29th decimal point. */
+
+	}
+
+	/* if M/N scalar */
+	else if (scale_unit_sel_y == 1) {
+		/* Calculate the quotient ( src_ROI_height ) / ( dst_ROI_height)
+		   with u3.29 precision. Quotient is rounded down to the smaller
+		   29th decimal point. */
+		numerator = (src_ROI_height) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_height);
+		phase_step_y = (uint32) mdp_do_div(numerator, denominator);
+	}
+
+	/* decide which set of FIR coefficients to use */
+	if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
+		xscale_filter_sel = 0;
+	else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
+		xscale_filter_sel = 1;
+	else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
+		xscale_filter_sel = 2;
+	else
+		xscale_filter_sel = 3;
+
+	if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
+		yscale_filter_sel = 0;
+	else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
+		yscale_filter_sel = 1;
+	else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
+		yscale_filter_sel = 2;
+	else
+		yscale_filter_sel = 3;
+
+	/* calculate phase init for the x direction */
+
+	/* if using FIR scalar */
+	if (scale_unit_sel_x == 0) {
+		if (dst_ROI_width == 1)
+			phase_init_x =
+			    (uint32) ((src_ROI_width - 1) << SCALER_PHASE_BITS);
+		else
+			phase_init_x = 0;
+
+	}
+	/* M over N scalar  */
+	else if (scale_unit_sel_x == 1)
+		phase_init_x = 0;
+
+	/* calculate phase init for the y direction
+	   if using FIR scalar */
+	if (scale_unit_sel_y == 0) {
+		if (dst_ROI_height == 1)
+			phase_init_y =
+			    (uint32) ((src_ROI_height -
+				       1) << SCALER_PHASE_BITS);
+		else
+			phase_init_y = 0;
+
+	}
+	/* M over N scalar   */
+	else if (scale_unit_sel_y == 1)
+		phase_init_y = 0;
+
+	/* write registers */
+	pval->phase_step_x = (uint32) phase_step_x;
+	pval->phase_step_y = (uint32) phase_step_y;
+	pval->phase_init_x = (uint32) phase_init_x;
+	pval->phase_init_y = (uint32) phase_init_y;
+
+	return;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+	uint32 dst_roi_width_scale;
+	uint32 dst_roi_height_scale;
+	struct phase_val pval;
+	boolean use_pr;
+	uint32 ppp_scale_config = 0;
+
+	if (!inputRGB)
+		ppp_scale_config |= BIT(6);
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width_scale = dst_roi_height;
+			dst_roi_height_scale = dst_roi_width;
+		} else {
+			dst_roi_width_scale = dst_roi_width;
+			dst_roi_height_scale = dst_roi_height;
+		}
+
+		if ((dst_roi_width_scale != iBuf->roi.width) ||
+		    (dst_roi_height_scale != iBuf->roi.height) ||
+			(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+			*pppop_reg_ptr |=
+			    (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+			mdp_calc_scaleInitPhase_3p1(iBuf->roi.width,
+						    iBuf->roi.height,
+						    dst_roi_width,
+						    dst_roi_height,
+						    iBuf->mdpImg.
+						    mdpOp & MDPOP_ROT90, 1, 1,
+						    &pval);
+
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+				 pval.phase_init_x);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+				 pval.phase_init_y);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+				 pval.phase_step_x);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+				 pval.phase_step_y);
+
+			use_pr = (inputRGB) && (outputRGB);
+
+			/* x-direction */
+			if ((dst_roi_width_scale == iBuf->roi.width) &&
+				!(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+				*pppop_reg_ptr &= ~PPP_OP_SCALE_X_ON;
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				8) {
+				if ((use_pr)
+				    && (mdp_scale_0p8_to_8p0_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p8_to_8p0_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_0p8_to_8p0_C0,
+					     mdp_scale_0p8_to_8p0_C1,
+					     mdp_scale_0p8_to_8p0_C2,
+					     mdp_scale_0p8_to_8p0_C3);
+				}
+				ppp_scale_config |= (SCALE_U1_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				6) {
+				if ((use_pr)
+				    && (mdp_scale_0p6_to_0p8_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p6_to_0p8_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_0p6_to_0p8_C0,
+					     mdp_scale_0p6_to_0p8_C1,
+					     mdp_scale_0p6_to_0p8_C2,
+					     mdp_scale_0p6_to_0p8_C3);
+				}
+				ppp_scale_config |= (SCALE_D2_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				4) {
+				if ((use_pr)
+				    && (mdp_scale_0p4_to_0p6_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p4_to_0p6_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_0p4_to_0p6_C0,
+					     mdp_scale_0p4_to_0p6_C1,
+					     mdp_scale_0p4_to_0p6_C2,
+					     mdp_scale_0p4_to_0p6_C3);
+				}
+				ppp_scale_config |= (SCALE_D1_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 4) / iBuf->roi.width) >=
+				1) {
+				if ((use_pr)
+				    && (mdp_scale_0p2_to_0p4_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p2_to_0p4_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_0p2_to_0p4_C0,
+					     mdp_scale_0p2_to_0p4_C1,
+					     mdp_scale_0p2_to_0p4_C2,
+					     mdp_scale_0p2_to_0p4_C3);
+				}
+				ppp_scale_config |= (SCALE_D0_SET << 2);
+			} else
+				ppp_scale_config |= BIT(0);
+
+			/* y-direction */
+			if ((dst_roi_height_scale == iBuf->roi.height) &&
+				!(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+				*pppop_reg_ptr &= ~PPP_OP_SCALE_Y_ON;
+			} else if (((dst_roi_height_scale * 10) /
+					iBuf->roi.height) > 8) {
+				if ((use_pr)
+				    && (mdp_scale_0p8_to_8p0_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p8_to_8p0_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_0p8_to_8p0_C0,
+					     mdp_scale_0p8_to_8p0_C1,
+					     mdp_scale_0p8_to_8p0_C2,
+					     mdp_scale_0p8_to_8p0_C3);
+				}
+				ppp_scale_config |= (SCALE_U1_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 10) /
+				 iBuf->roi.height) > 6) {
+				if ((use_pr)
+				    && (mdp_scale_0p6_to_0p8_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p6_to_0p8_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_0p6_to_0p8_C0,
+					     mdp_scale_0p6_to_0p8_C1,
+					     mdp_scale_0p6_to_0p8_C2,
+					     mdp_scale_0p6_to_0p8_C3);
+				}
+				ppp_scale_config |= (SCALE_D2_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 10) /
+				 iBuf->roi.height) > 4) {
+				if ((use_pr)
+				    && (mdp_scale_0p4_to_0p6_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p4_to_0p6_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_0p4_to_0p6_C0,
+					     mdp_scale_0p4_to_0p6_C1,
+					     mdp_scale_0p4_to_0p6_C2,
+					     mdp_scale_0p4_to_0p6_C3);
+				}
+				ppp_scale_config |= (SCALE_D1_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 4) /
+				 iBuf->roi.height) >= 1) {
+				if ((use_pr)
+				    && (mdp_scale_0p2_to_0p4_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p2_to_0p4_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_0p2_to_0p4_C0,
+					     mdp_scale_0p2_to_0p4_C1,
+					     mdp_scale_0p2_to_0p4_C2,
+					     mdp_scale_0p2_to_0p4_C3);
+				}
+				ppp_scale_config |= (SCALE_D0_SET << 4);
+			} else
+				ppp_scale_config |= BIT(1);
+
+			if (iBuf->mdpImg.mdpOp & MDPOP_SHARPENING) {
+				ppp_scale_config |= BIT(7);
+				MDP_OUTP(MDP_BASE + 0x50020,
+						iBuf->mdpImg.sp_value);
+			}
+
+			MDP_OUTP(MDP_BASE + 0x10230, ppp_scale_config);
+		} else {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+		}
+	}
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+	switch (layer) {
+	case 0:
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0200, (y << 16) | (x));
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0208,
+			 (height << 16) | (width));
+		break;
+
+	case 1:
+		/* MDP 3.1 HW bug workaround */
+		if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+			*src0 += (x + y * width) * bpp;
+			x = y = 0;
+			width = iBuf->roi.dst_width;
+			height = iBuf->roi.dst_height;
+		}
+
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0204, (y << 16) | (x));
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x020c,
+			 (height << 16) | (width));
+		break;
+
+	case 2:
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x019c, (y << 16) | (x));
+		break;
+	}
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+	int bg_alpha;
+
+	*alpha = iBuf->mdpImg.alpha;
+	*tpVal = iBuf->mdpImg.tpVal;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_FG_PM_ALPHA) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_CONSTANT_ALPHA;
+
+		bg_alpha = PPP_BLEND_BG_USE_ALPHA_SEL |
+				PPP_BLEND_BG_ALPHA_REVERSE;
+
+		if (perPixelAlpha)
+			bg_alpha |= PPP_BLEND_BG_SRCPIXEL_ALPHA;
+		else
+			bg_alpha |= PPP_BLEND_BG_CONSTANT_ALPHA;
+
+		outpdw(MDP_BASE + 0x70010, bg_alpha);
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+			*pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+	} else if (perPixelAlpha) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+	} else {
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.alpha == 0xff)) {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+		}
+
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    || (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+			*pppop_reg_ptr |=
+			    PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+			    PPP_OP_BLEND_CONSTANT_ALPHA |
+			    PPP_OP_BLEND_ALPHA_BLEND_NORMAL;
+		}
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+			*pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+	}
+}
diff --git a/drivers/staging/msm/mdp_vsync.c b/drivers/staging/msm/mdp_vsync.c
new file mode 100644
index 00000000000..bbd45604435
--- /dev/null
+++ b/drivers/staging/msm/mdp_vsync.c
@@ -0,0 +1,389 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <mach/gpio.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_SYNC_CFG_0		0x100
+#define MDP_SYNC_STATUS_0	0x10c
+#define MDP_PRIM_VSYNC_OUT_CTRL	0x118
+#define MDP_PRIM_VSYNC_INIT_VAL	0x128
+#else
+#define MDP_SYNC_CFG_0		0x300
+#define MDP_SYNC_STATUS_0	0x30c
+#define MDP_PRIM_VSYNC_OUT_CTRL	0x318
+#define MDP_PRIM_VSYNC_INIT_VAL	0x328
+#endif
+
+extern mddi_lcd_type mddi_lcd_idx;
+extern spinlock_t mdp_spin_lock;
+extern struct workqueue_struct *mdp_vsync_wq;
+extern int lcdc_mode;
+extern int vsync_mode;
+
+#ifdef MDP_HW_VSYNC
+int vsync_above_th = 4;
+int vsync_start_th = 1;
+int vsync_load_cnt;
+
+struct clk *mdp_vsync_clk;
+
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd)
+{
+	if (mfd->use_mdp_vsync)
+		clk_enable(mdp_vsync_clk);
+}
+
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd)
+{
+	if (mfd->use_mdp_vsync)
+		clk_disable(mdp_vsync_clk);
+}
+#endif
+
+static void mdp_set_vsync(unsigned long data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+	struct msm_fb_panel_data *pdata = NULL;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_vsync_notifier == NULL))
+		return;
+
+	init_timer(&mfd->vsync_resync_timer);
+	mfd->vsync_resync_timer.function = mdp_set_vsync;
+	mfd->vsync_resync_timer.data = data;
+	mfd->vsync_resync_timer.expires =
+	    jiffies + mfd->panel_info.lcd.vsync_notifier_period;
+	add_timer(&mfd->vsync_resync_timer);
+
+	if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on)
+	    && (!mfd->vsync_handler_pending)) {
+		mfd->vsync_handler_pending = TRUE;
+		if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) {
+			MSM_FB_INFO
+			    ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n");
+		}
+	} else {
+		MSM_FB_DEBUG
+		    ("mdp_set_vsync failed!  EN:%d  PWR:%d  PENDING:%d\n",
+		     mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on,
+		     mfd->vsync_handler_pending);
+	}
+}
+
+static void mdp_vsync_handler(void *data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+	if (mfd->use_mdp_vsync) {
+#ifdef MDP_HW_VSYNC
+		if (mfd->panel_power_on)
+			MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt);
+
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+#endif
+	} else {
+		mfd->last_vsync_timetick = ktime_get_real();
+	}
+
+	mfd->vsync_handler_pending = FALSE;
+}
+
+irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data)
+{
+	/*
+	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+	 * but getting inaccurate timing in mdp_vsync_handler()
+	 * disable_irq(MDP_HW_VSYNC_IRQ);
+	 */
+	mdp_vsync_handler(data);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef MDP_HW_VSYNC
+static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt)
+{
+	unsigned long cfg;
+
+	cfg = mfd->total_lcd_lines - 1;
+	cfg <<= MDP_SYNCFG_HGT_LOC;
+	if (mfd->panel_info.lcd.hw_vsync_mode)
+		cfg |= MDP_SYNCFG_VSYNC_EXT_EN;
+	cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt);
+
+	MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg);
+}
+#endif
+
+void mdp_config_vsync(struct msm_fb_data_type *mfd)
+{
+
+	/* vsync on primary lcd only for now */
+	if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
+	    || (!vsync_mode)) {
+		goto err_handle;
+	}
+
+	if (mfd->panel_info.lcd.vsync_enable) {
+		mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
+		    mfd->panel_info.lcd.v_front_porch +
+		    mfd->panel_info.lcd.v_pulse_width;
+		mfd->total_lcd_lines =
+		    mfd->panel_info.yres + mfd->total_porch_lines;
+		mfd->lcd_ref_usec_time =
+		    100000000 / mfd->panel_info.lcd.refx100;
+		mfd->vsync_handler_pending = FALSE;
+		mfd->last_vsync_timetick.tv.sec = 0;
+		mfd->last_vsync_timetick.tv.nsec = 0;
+
+#ifdef MDP_HW_VSYNC
+		if (mdp_vsync_clk == NULL)
+			mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
+
+		if (IS_ERR(mdp_vsync_clk)) {
+			printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
+			mfd->use_mdp_vsync = 0;
+		} else
+			mfd->use_mdp_vsync = 1;
+
+		if (mfd->use_mdp_vsync) {
+			uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
+			uint32 mdp_vsync_clk_speed_hz;
+
+			mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
+
+			if (mdp_vsync_clk_speed_hz == 0) {
+				mfd->use_mdp_vsync = 0;
+			} else {
+				/*
+				 * Do this calculation in 2 steps for
+				 * rounding uint32 properly.
+				 */
+				vsync_cnt_cfg_dem =
+				    (mfd->panel_info.lcd.refx100 *
+				     mfd->total_lcd_lines) / 100;
+				vsync_cnt_cfg =
+				    (mdp_vsync_clk_speed_hz) /
+				    vsync_cnt_cfg_dem;
+
+				/* MDP cmd block enable */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+					      FALSE);
+				mdp_hw_vsync_clk_enable(mfd);
+
+				mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);
+
+				/*
+				 * load the last line + 1 to be in the
+				 * safety zone
+				 */
+				vsync_load_cnt = mfd->panel_info.yres;
+
+				/* line counter init value at the next pulse */
+				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
+							vsync_load_cnt);
+
+				/*
+				 * external vsync source pulse width and
+				 * polarity flip
+				 */
+				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
+							BIT(30) | BIT(0));
+
+
+				/* threshold */
+				MDP_OUTP(MDP_BASE + 0x200,
+					 (vsync_above_th << 16) |
+					 (vsync_start_th));
+
+				mdp_hw_vsync_clk_disable(mfd);
+				/* MDP cmd block disable */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK,
+					      MDP_BLOCK_POWER_OFF, FALSE);
+			}
+		}
+#else
+		mfd->use_mdp_vsync = 0;
+		hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL);
+		mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
+		mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
+#endif
+
+		mfd->channel_irq = 0;
+		if (mfd->panel_info.lcd.hw_vsync_mode) {
+			u32 vsync_gpio = mfd->vsync_gpio;
+			u32 ret;
+
+			if (vsync_gpio == -1) {
+				MSM_FB_INFO("vsync_gpio not defined!\n");
+				goto err_handle;
+			}
+
+			ret = gpio_tlmm_config(GPIO_CFG
+					(vsync_gpio,
+					(mfd->use_mdp_vsync) ? 1 : 0,
+					GPIO_INPUT,
+					GPIO_PULL_DOWN,
+					GPIO_2MA),
+					GPIO_ENABLE);
+			if (ret)
+				goto err_handle;
+
+			if (!mfd->use_mdp_vsync) {
+				mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
+				if (request_irq
+				    (mfd->channel_irq,
+				     &mdp_hw_vsync_handler_proxy,
+				     IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
+				     (void *)mfd)) {
+					MSM_FB_INFO
+					("irq=%d failed! vsync_gpio=%d\n",
+						mfd->channel_irq,
+						vsync_gpio);
+					goto err_handle;
+				}
+			}
+		}
+
+		mdp_set_vsync((unsigned long)mfd);
+	}
+
+	return;
+
+err_handle:
+	if (mfd->vsync_width_boundary)
+		vfree(mfd->vsync_width_boundary);
+	mfd->panel_info.lcd.vsync_enable = FALSE;
+	printk(KERN_ERR "%s: failed!\n", __func__);
+}
+
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work)
+{
+	struct msm_fb_data_type *mfd = NULL;
+	int vsync_fnc_enabled = FALSE;
+	struct msm_fb_panel_data *pdata = NULL;
+
+	mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker);
+
+	if (mfd) {
+		if (mfd->panel_power_on) {
+			pdata =
+			    (struct msm_fb_panel_data *)mfd->pdev->dev.
+			    platform_data;
+
+			/*
+			 * we need to turn on MDP power if it uses MDP vsync
+			 * HW block in SW mode
+			 */
+			if ((!mfd->panel_info.lcd.hw_vsync_mode) &&
+			    (mfd->use_mdp_vsync) &&
+			    (pdata) && (pdata->set_vsync_notifier != NULL)) {
+				/*
+				 * enable pwr here since we can't enable it in
+				 * vsync callback in isr mode
+				 */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+					      FALSE);
+			}
+
+			if (pdata->set_vsync_notifier != NULL) {
+				vsync_fnc_enabled = TRUE;
+				pdata->set_vsync_notifier(mdp_vsync_handler,
+							  (void *)mfd);
+			}
+		}
+	}
+
+	if ((mfd) && (!vsync_fnc_enabled))
+		mfd->vsync_handler_pending = FALSE;
+}
+
+boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data)
+{
+	/*
+	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+	 * but getting inaccurate timing in mdp_vsync_handler()
+	 * enable_irq(MDP_HW_VSYNC_IRQ);
+	 */
+
+	return TRUE;
+}
+
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd)
+{
+	uint32 elapsed_usec_time;
+	uint32 lcd_line;
+	ktime_t last_vsync_timetick_local;
+	ktime_t curr_time;
+	unsigned long flag;
+
+	if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode))
+		return 0;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	last_vsync_timetick_local = mfd->last_vsync_timetick;
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	curr_time = ktime_get_real();
+	elapsed_usec_time =
+	    ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) +
+	    ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000);
+
+	elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time;
+
+	/* lcd line calculation referencing to line counter = 0 */
+	lcd_line =
+	    (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time;
+
+	/* lcd line adjusment referencing to the actual line counter at vsync */
+	lcd_line =
+	    (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch +
+	     lcd_line) % (mfd->total_lcd_lines + 1);
+
+	if (lcd_line > mfd->total_lcd_lines) {
+		MSM_FB_INFO
+		    ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n");
+	}
+
+	return lcd_line;
+}
diff --git a/drivers/staging/msm/memory.c b/drivers/staging/msm/memory.c
new file mode 100644
index 00000000000..cc80fdf17d6
--- /dev/null
+++ b/drivers/staging/msm/memory.c
@@ -0,0 +1,214 @@
+/* arch/arm/mach-msm/memory.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/mm_types.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/mach/map.h>
+#include "memory_ll.h"
+#include <asm/cacheflush.h>
+#if defined(CONFIG_MSM_NPA_REMOTE)
+#include "npa_remote.h"
+#include <linux/completion.h>
+#include <linux/err.h>
+#endif
+
+int arch_io_remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
+			    unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	unsigned long pfn_addr = pfn << PAGE_SHIFT;
+/*
+	if ((pfn_addr >= 0x88000000) && (pfn_addr < 0xD0000000)) {
+		prot = pgprot_device(prot);
+		printk("remapping device %lx\n", prot);
+	}
+*/
+	panic("Memory remap PFN stuff not done\n");
+	return remap_pfn_range(vma, addr, pfn, size, prot);
+}
+
+void *zero_page_strongly_ordered;
+
+static void map_zero_page_strongly_ordered(void)
+{
+	if (zero_page_strongly_ordered)
+		return;
+/*
+	zero_page_strongly_ordered =
+		ioremap_strongly_ordered(page_to_pfn(empty_zero_page)
+		<< PAGE_SHIFT, PAGE_SIZE);
+*/
+	panic("Strongly ordered memory functions not implemented\n");
+}
+
+void write_to_strongly_ordered_memory(void)
+{
+	map_zero_page_strongly_ordered();
+	*(int *)zero_page_strongly_ordered = 0;
+}
+EXPORT_SYMBOL(write_to_strongly_ordered_memory);
+
+void flush_axi_bus_buffer(void)
+{
+	__asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory");
+	write_to_strongly_ordered_memory();
+}
+
+#define CACHE_LINE_SIZE 32
+
+/* These cache related routines make the assumption that the associated
+ * physical memory is contiguous. They will operate on all (L1
+ * and L2 if present) caches.
+ */
+void clean_and_invalidate_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c14, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_flush_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void clean_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c10, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_clean_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void invalidate_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_inv_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment)
+{
+	void *unused_addr = NULL;
+	unsigned long addr, tmp_size, unused_size;
+
+	/* Allocate maximum size needed, see where it ends up.
+	 * Then free it -- in this path there are no other allocators
+	 * so we can depend on getting the same address back
+	 * when we allocate a smaller piece that is aligned
+	 * at the end (if necessary) and the piece we really want,
+	 * then free the unused first piece.
+	 */
+
+	tmp_size = size + alignment - PAGE_SIZE;
+	addr = (unsigned long)alloc_bootmem(tmp_size);
+	free_bootmem(__pa(addr), tmp_size);
+
+	unused_size = alignment - (addr % alignment);
+	if (unused_size)
+		unused_addr = alloc_bootmem(unused_size);
+
+	addr = (unsigned long)alloc_bootmem(size);
+	if (unused_size)
+		free_bootmem(__pa(unused_addr), unused_size);
+
+	return (void *)addr;
+}
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+struct npa_client *npa_memory_client;
+#endif
+
+static int change_memory_power_state(unsigned long start_pfn,
+	unsigned long nr_pages, int state)
+{
+#if defined(CONFIG_MSM_NPA_REMOTE)
+	static atomic_t node_created_flag = ATOMIC_INIT(1);
+#else
+	unsigned long start;
+	unsigned long size;
+	unsigned long virtual;
+#endif
+	int rc = 0;
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+	if (atomic_dec_and_test(&node_created_flag)) {
+		/* Create NPA 'required' client. */
+		npa_memory_client = npa_create_sync_client(NPA_MEMORY_NODE_NAME,
+			"memory node", NPA_CLIENT_REQUIRED);
+		if (IS_ERR(npa_memory_client)) {
+			rc = PTR_ERR(npa_memory_client);
+			return rc;
+		}
+	}
+
+	rc = npa_issue_required_request(npa_memory_client, state);
+#else
+	if (state == MEMORY_DEEP_POWERDOWN) {
+		/* simulate turning off memory by writing bit pattern into it */
+		start = start_pfn << PAGE_SHIFT;
+		size = nr_pages << PAGE_SHIFT;
+		virtual = __phys_to_virt(start);
+		memset((void *)virtual, 0x27, size);
+	}
+#endif
+	return rc;
+}
+
+int platform_physical_remove_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages,
+		MEMORY_DEEP_POWERDOWN);
+}
+
+int platform_physical_add_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages, MEMORY_ACTIVE);
+}
+
+int platform_physical_low_power_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages,
+		MEMORY_SELF_REFRESH);
+}
diff --git a/drivers/staging/msm/memory_ll.h b/drivers/staging/msm/memory_ll.h
new file mode 100644
index 00000000000..18a239a89a7
--- /dev/null
+++ b/drivers/staging/msm/memory_ll.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_LL_H
+#define __ASM_ARCH_MEMORY_LL_H
+
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 25
+
+#define HAS_ARCH_IO_REMAP_PFN_RANGE
+
+#ifndef __ASSEMBLY__
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment);
+void clean_and_invalidate_caches(unsigned long, unsigned long, unsigned long);
+void clean_caches(unsigned long, unsigned long, unsigned long);
+void invalidate_caches(unsigned long, unsigned long, unsigned long);
+int platform_physical_remove_pages(unsigned long, unsigned long);
+int platform_physical_add_pages(unsigned long, unsigned long);
+int platform_physical_low_power_pages(unsigned long, unsigned long);
+
+#ifdef CONFIG_ARCH_MSM_ARM11
+void write_to_strongly_ordered_memory(void);
+
+#include <asm/mach-types.h>
+
+#define arch_barrier_extra() do \
+	{ if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())  \
+		write_to_strongly_ordered_memory(); \
+	} while (0)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void l2x0_cache_sync(void);
+#define finish_arch_switch(prev)     do { l2x0_cache_sync(); } while (0)
+#endif
+
+#endif
+
+#ifdef CONFIG_ARCH_MSM_SCORPION
+#define arch_has_speculative_dfetch()	1
+#endif
+
+#endif
+
+/* these correspond to values known by the modem */
+#define MEMORY_DEEP_POWERDOWN	0
+#define MEMORY_SELF_REFRESH	1
+#define MEMORY_ACTIVE		2
+
+#define NPA_MEMORY_NODE_NAME	"/mem/ebi1/cs1"
diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c
new file mode 100644
index 00000000000..af5620e4eee
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.c
@@ -0,0 +1,2354 @@
+/*
+ *
+ * Core MSM framebuffer driver.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <mach/board.h>
+#include <linux/uaccess.h>
+
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+#include <linux/leds.h>
+#include <asm/dma-mapping.h>
+
+
+#define MSM_FB_C
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "tvenc.h"
+#include "mdp.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_LOGO
+#define INIT_IMAGE_FILE "/logo.rle"
+extern int load_565rle_image(char *filename);
+#endif
+
+
+#define pgprot_noncached(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+#define pgprot_writecombine(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_device(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_DEV_NONSHARED)
+#define pgprot_writethroughcache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITETHROUGH)
+#define pgprot_writebackcache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEBACK)
+#define pgprot_writebackwacache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEALLOC)
+
+static unsigned char *fbram;
+static unsigned char *fbram_phys;
+static int fbram_size;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+int vsync_mode = 1;
+
+#define MAX_FBI_LIST 32
+static struct fb_info *fbi_list[MAX_FBI_LIST];
+static int fbi_list_index;
+
+static struct msm_fb_data_type *mfd_list[MAX_FBI_LIST];
+static int mfd_list_index;
+
+static u32 msm_fb_pseudo_palette[16] = {
+	0x00000000, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
+};
+
+u32 msm_fb_debug_enabled;
+/* Setting msm_fb_msg_level to 8 prints out ALL messages */
+u32 msm_fb_msg_level = 7;
+
+/* Setting mddi_msg_level to 8 prints out ALL messages */
+u32 mddi_msg_level = 5;
+
+extern int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+extern unsigned long mdp_timer_duration;
+
+static int msm_fb_register(struct msm_fb_data_type *mfd);
+static int msm_fb_open(struct fb_info *info, int user);
+static int msm_fb_release(struct fb_info *info, int user);
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info);
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd);
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd);
+static int msm_fb_check_var(struct fb_var_screeninfo *var,
+			    struct fb_info *info);
+static int msm_fb_set_par(struct fb_info *info);
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+			    boolean op_enable);
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg);
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma);
+
+#ifdef MSM_FB_ENABLE_DBGFS
+
+#define MSM_FB_MAX_DBGFS 1024
+#define MAX_BACKLIGHT_BRIGHTNESS 255
+
+int msm_fb_debugfs_file_index;
+struct dentry *msm_fb_debugfs_root;
+struct dentry *msm_fb_debugfs_file[MSM_FB_MAX_DBGFS];
+
+struct dentry *msm_fb_get_debugfs_root(void)
+{
+	if (msm_fb_debugfs_root == NULL)
+		msm_fb_debugfs_root = debugfs_create_dir("msm_fb", NULL);
+
+	return msm_fb_debugfs_root;
+}
+
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+				u32 *var)
+{
+	if (msm_fb_debugfs_file_index >= MSM_FB_MAX_DBGFS)
+		return;
+
+	msm_fb_debugfs_file[msm_fb_debugfs_file_index++] =
+	    debugfs_create_u32(name, S_IRUGO | S_IWUSR, root, var);
+}
+#endif
+
+int msm_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->cursor_update)
+		return -ENODEV;
+
+	return mfd->cursor_update(info, cursor);
+}
+
+static int msm_fb_resource_initialized;
+
+#ifndef CONFIG_FB_BACKLIGHT
+static int lcd_backlight_registered;
+
+static void msm_fb_set_bl_brightness(struct led_classdev *led_cdev,
+					enum led_brightness value)
+{
+	struct msm_fb_data_type *mfd = dev_get_drvdata(led_cdev->dev->parent);
+	int bl_lvl;
+
+	if (value > MAX_BACKLIGHT_BRIGHTNESS)
+		value = MAX_BACKLIGHT_BRIGHTNESS;
+
+	/* This maps android backlight level 0 to 255 into
+	   driver backlight level 0 to bl_max with rounding */
+	bl_lvl = (2 * value * mfd->panel_info.bl_max + MAX_BACKLIGHT_BRIGHTNESS)
+		/(2 * MAX_BACKLIGHT_BRIGHTNESS);
+
+	if (!bl_lvl && value)
+		bl_lvl = 1;
+
+	msm_fb_set_backlight(mfd, bl_lvl, 1);
+}
+
+static struct led_classdev backlight_led = {
+	.name		= "lcd-backlight",
+	.brightness	= MAX_BACKLIGHT_BRIGHTNESS,
+	.brightness_set	= msm_fb_set_bl_brightness,
+};
+#endif
+
+static struct msm_fb_platform_data *msm_fb_pdata;
+
+int msm_fb_detect_client(const char *name)
+{
+	int ret = -EPERM;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+#endif
+
+	if (msm_fb_pdata && msm_fb_pdata->detect_client) {
+		ret = msm_fb_pdata->detect_client(name);
+
+		/* if it's non mddi panel, we need to pre-scan
+		   mddi client to see if we can disable mddi host */
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+		if (!ret && msm_fb_pdata->mddi_prescan)
+			id = mddi_get_client_id();
+#endif
+	}
+
+	return ret;
+}
+
+static int msm_fb_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	int rc;
+
+	MSM_FB_DEBUG("msm_fb_probe\n");
+
+	if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+		msm_fb_pdata = pdev->dev.platform_data;
+		fbram_size =
+			pdev->resource[0].end - pdev->resource[0].start + 1;
+		fbram_phys = (char *)pdev->resource[0].start;
+		fbram = ioremap((unsigned long)fbram_phys, fbram_size);
+
+		if (!fbram) {
+			printk(KERN_ERR "fbram ioremap failed!\n");
+			return -ENOMEM;
+		}
+		MSM_FB_INFO("msm_fb_probe:  phy_Addr = 0x%x virt = 0x%x\n",
+			     (int)fbram_phys, (int)fbram);
+
+		msm_fb_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!msm_fb_resource_initialized)
+		return -EPERM;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mfd->panel_info.frame_count = 0;
+	mfd->bl_level = mfd->panel_info.bl_max;
+
+	if (mfd->panel_info.type == LCDC_PANEL)
+		mfd->allow_set_offset =
+		msm_fb_pdata->allow_set_offset != NULL ?
+		msm_fb_pdata->allow_set_offset() : 0;
+	else
+		mfd->allow_set_offset = 0;
+
+	rc = msm_fb_register(mfd);
+	if (rc)
+		return rc;
+
+#ifdef CONFIG_FB_BACKLIGHT
+	msm_fb_config_backlight(mfd);
+#else
+	/* android supports only one lcd-backlight/lcd for now */
+	if (!lcd_backlight_registered) {
+		if (led_classdev_register(&pdev->dev, &backlight_led))
+			printk(KERN_ERR "led_classdev_register failed\n");
+		else
+			lcd_backlight_registered = 1;
+	}
+#endif
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+}
+
+static int msm_fb_remove(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	MSM_FB_DEBUG("msm_fb_remove\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (msm_fb_suspend_sub(mfd))
+		printk(KERN_ERR "msm_fb_remove: can't stop the device %d\n", mfd->index);
+
+	if (mfd->channel_irq != 0)
+		free_irq(mfd->channel_irq, (void *)mfd);
+
+	if (mfd->vsync_width_boundary)
+		vfree(mfd->vsync_width_boundary);
+
+	if (mfd->vsync_resync_timer.function)
+		del_timer(&mfd->vsync_resync_timer);
+
+	if (mfd->refresh_timer.function)
+		del_timer(&mfd->refresh_timer);
+
+	if (mfd->dma_hrtimer.function)
+		hrtimer_cancel(&mfd->dma_hrtimer);
+
+	/* remove /dev/fb* */
+	unregister_framebuffer(mfd->fbi);
+
+#ifdef CONFIG_FB_BACKLIGHT
+	/* remove /sys/class/backlight */
+	backlight_device_unregister(mfd->fbi->bl_dev);
+#else
+	if (lcd_backlight_registered) {
+		lcd_backlight_registered = 0;
+		led_classdev_unregister(&backlight_led);
+	}
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	if (mfd->sub_dir)
+		debugfs_remove(mfd->sub_dir);
+#endif
+
+	return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct msm_fb_data_type *mfd;
+	int ret = 0;
+
+	MSM_FB_DEBUG("msm_fb_suspend\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	acquire_console_sem();
+	fb_set_suspend(mfd->fbi, 1);
+
+	ret = msm_fb_suspend_sub(mfd);
+	if (ret != 0) {
+		printk(KERN_ERR "msm_fb: failed to suspend! %d\n", ret);
+		fb_set_suspend(mfd->fbi, 0);
+	} else {
+		pdev->dev.power.power_state = state;
+	}
+
+	release_console_sem();
+	return ret;
+}
+#else
+#define msm_fb_suspend NULL
+#endif
+
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd)
+{
+	int ret = 0;
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	/*
+	 * suspend this channel
+	 */
+	mfd->suspend.sw_refreshing_enable = mfd->sw_refreshing_enable;
+	mfd->suspend.op_enable = mfd->op_enable;
+	mfd->suspend.panel_power_on = mfd->panel_power_on;
+
+	if (mfd->op_enable) {
+		ret =
+		     msm_fb_blank_sub(FB_BLANK_POWERDOWN, mfd->fbi,
+				      mfd->suspend.op_enable);
+		if (ret) {
+			MSM_FB_INFO
+			    ("msm_fb_suspend: can't turn off display!\n");
+			return ret;
+		}
+		mfd->op_enable = FALSE;
+	}
+	/*
+	 * try to power down
+	 */
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	/*
+	 * detach display channel irq if there's any
+	 * or wait until vsync-resync completes
+	 */
+	if ((mfd->dest == DISPLAY_LCD)) {
+		if (mfd->panel_info.lcd.vsync_enable) {
+			if (mfd->panel_info.lcd.hw_vsync_mode) {
+				if (mfd->channel_irq != 0)
+					disable_irq(mfd->channel_irq);
+			} else {
+				volatile boolean vh_pending;
+				do {
+					vh_pending = mfd->vsync_handler_pending;
+				} while (vh_pending);
+			}
+		}
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_resume(struct platform_device *pdev)
+{
+	/* This resume function is called when interrupt is enabled.
+	 */
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	MSM_FB_DEBUG("msm_fb_resume\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	acquire_console_sem();
+	ret = msm_fb_resume_sub(mfd);
+	pdev->dev.power.power_state = PMSG_ON;
+	fb_set_suspend(mfd->fbi, 1);
+	release_console_sem();
+
+	return ret;
+}
+#else
+#define msm_fb_resume NULL
+#endif
+
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd)
+{
+	int ret = 0;
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	/* attach display channel irq if there's any */
+	if (mfd->channel_irq != 0)
+		enable_irq(mfd->channel_irq);
+
+	/* resume state var recover */
+	mfd->sw_refreshing_enable = mfd->suspend.sw_refreshing_enable;
+	mfd->op_enable = mfd->suspend.op_enable;
+
+	if (mfd->suspend.panel_power_on) {
+		ret =
+		     msm_fb_blank_sub(FB_BLANK_UNBLANK, mfd->fbi,
+				      mfd->op_enable);
+		if (ret)
+			MSM_FB_INFO("msm_fb_resume: can't turn on display!\n");
+	}
+
+	return ret;
+}
+
+static struct platform_driver msm_fb_driver = {
+	.probe = msm_fb_probe,
+	.remove = msm_fb_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+	.suspend = msm_fb_suspend,
+	.resume = msm_fb_resume,
+#endif
+	.shutdown = NULL,
+	.driver = {
+		   /* Driver name must match the device name added in platform.c. */
+		   .name = "msm_fb",
+		   },
+};
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void msmfb_early_suspend(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+						    early_suspend);
+	msm_fb_suspend_sub(mfd);
+}
+
+static void msmfb_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+						    early_suspend);
+	msm_fb_resume_sub(mfd);
+}
+#endif
+
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl, u32 save)
+{
+	struct msm_fb_panel_data *pdata;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_backlight)) {
+		down(&mfd->sem);
+		if ((bkl_lvl != mfd->bl_level) || (!save)) {
+			u32 old_lvl;
+
+			old_lvl = mfd->bl_level;
+			mfd->bl_level = bkl_lvl;
+			pdata->set_backlight(mfd);
+
+			if (!save)
+				mfd->bl_level = old_lvl;
+		}
+		up(&mfd->sem);
+	}
+}
+
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+			    boolean op_enable)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct msm_fb_panel_data *pdata = NULL;
+	int ret = 0;
+
+	if (!op_enable)
+		return -EPERM;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+	if ((!pdata) || (!pdata->on) || (!pdata->off)) {
+		printk(KERN_ERR "msm_fb_blank_sub: no panel operation detected!\n");
+		return -ENODEV;
+	}
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		if (!mfd->panel_power_on) {
+			mdelay(100);
+			ret = pdata->on(mfd->pdev);
+			if (ret == 0) {
+				mfd->panel_power_on = TRUE;
+
+				msm_fb_set_backlight(mfd,
+						     mfd->bl_level, 0);
+
+/* ToDo: possible conflict with android which doesn't expect sw refresher */
+/*
+	  if (!mfd->hw_refresh)
+	  {
+	    if ((ret = msm_fb_resume_sw_refresher(mfd)) != 0)
+	    {
+	      MSM_FB_INFO("msm_fb_blank_sub: msm_fb_resume_sw_refresher failed = %d!\n",ret);
+	    }
+	  }
+*/
+			}
+		}
+		break;
+
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_POWERDOWN:
+	default:
+		if (mfd->panel_power_on) {
+			int curr_pwr_state;
+
+			mfd->op_enable = FALSE;
+			curr_pwr_state = mfd->panel_power_on;
+			mfd->panel_power_on = FALSE;
+
+			mdelay(100);
+			ret = pdata->off(mfd->pdev);
+			if (ret)
+				mfd->panel_power_on = curr_pwr_state;
+
+			msm_fb_set_backlight(mfd, 0, 0);
+			mfd->op_enable = TRUE;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static void msm_fb_fillrect(struct fb_info *info,
+			    const struct fb_fillrect *rect)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_fillrect(info, rect);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (rect->dy << 16) | (rect->dx);
+		var.reserved[2] = ((rect->dy + rect->height) << 16) |
+		    (rect->dx + rect->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static void msm_fb_copyarea(struct fb_info *info,
+			    const struct fb_copyarea *area)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_copyarea(info, area);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (area->dy << 16) | (area->dx);
+		var.reserved[2] = ((area->dy + area->height) << 16) |
+		    (area->dx + area->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static void msm_fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_imageblit(info, image);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (image->dy << 16) | (image->dx);
+		var.reserved[2] = ((image->dy + image->height) << 16) |
+		    (image->dx + image->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static int msm_fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	return msm_fb_blank_sub(blank_mode, info, mfd->op_enable);
+}
+
+static int msm_fb_set_lut(struct fb_cmap *cmap, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->lut_update)
+		return -ENODEV;
+
+	mfd->lut_update(info, cmap);
+	return 0;
+}
+
+/*
+ * Custom Framebuffer mmap() function for MSM driver.
+ * Differs from standard mmap() function by allowing for customized
+ * page-protection.
+ */
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma)
+{
+	/* Get frame buffer memory range. */
+	unsigned long start = info->fix.smem_start;
+	u32 len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
+	unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	if (off >= len) {
+		/* memory mapped io */
+		off -= len;
+		if (info->var.accel_flags) {
+			mutex_unlock(&info->lock);
+			return -EINVAL;
+		}
+		start = info->fix.mmio_start;
+		len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
+	}
+
+	/* Set VM flags. */
+	start &= PAGE_MASK;
+	if ((vma->vm_end - vma->vm_start + off) > len)
+		return -EINVAL;
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	/* This is an IO map - tell maydump to skip this VMA */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+
+	/* Set VM page protection */
+	if (mfd->mdp_fb_page_protection == MDP_FB_PAGE_PROTECTION_WRITECOMBINE)
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE)
+		vma->vm_page_prot = pgprot_writethroughcache(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE)
+		vma->vm_page_prot = pgprot_writebackcache(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE)
+		vma->vm_page_prot = pgprot_writebackwacache(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	/* Remap the frame buffer I/O range */
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+				vma->vm_end - vma->vm_start,
+				vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static struct fb_ops msm_fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_open = msm_fb_open,
+	.fb_release = msm_fb_release,
+	.fb_read = NULL,
+	.fb_write = NULL,
+	.fb_cursor = NULL,
+	.fb_check_var = msm_fb_check_var,	/* vinfo check */
+	.fb_set_par = msm_fb_set_par,	/* set the video mode according to info->var */
+	.fb_setcolreg = NULL,	/* set color register */
+	.fb_blank = msm_fb_blank,	/* blank display */
+	.fb_pan_display = msm_fb_pan_display,	/* pan display */
+	.fb_fillrect = msm_fb_fillrect,	/* Draws a rectangle */
+	.fb_copyarea = msm_fb_copyarea,	/* Copy data from area to another */
+	.fb_imageblit = msm_fb_imageblit,	/* Draws a image to the display */
+	.fb_rotate = NULL,
+	.fb_sync = NULL,	/* wait for blit idle, optional */
+	.fb_ioctl = msm_fb_ioctl,	/* perform fb specific ioctl (optional) */
+	.fb_mmap = msm_fb_mmap,
+};
+
+static int msm_fb_register(struct msm_fb_data_type *mfd)
+{
+	int ret = -ENODEV;
+	int bpp;
+	struct msm_panel_info *panel_info = &mfd->panel_info;
+	struct fb_info *fbi = mfd->fbi;
+	struct fb_fix_screeninfo *fix;
+	struct fb_var_screeninfo *var;
+	int *id;
+	int fbram_offset;
+
+	/*
+	 * fb info initialization
+	 */
+	fix = &fbi->fix;
+	var = &fbi->var;
+
+	fix->type_aux = 0;	/* if type == FB_TYPE_INTERLEAVED_PLANES */
+	fix->visual = FB_VISUAL_TRUECOLOR;	/* True Color */
+	fix->ywrapstep = 0;	/* No support */
+	fix->mmio_start = 0;	/* No MMIO Address */
+	fix->mmio_len = 0;	/* No MMIO Address */
+	fix->accel = FB_ACCEL_NONE;/* FB_ACCEL_MSM needes to be added in fb.h */
+
+	var->xoffset = 0,	/* Offset from virtual to visible */
+	var->yoffset = 0,	/* resolution */
+	var->grayscale = 0,	/* No graylevels */
+	var->nonstd = 0,	/* standard pixel format */
+	var->activate = FB_ACTIVATE_VBL,	/* activate it at vsync */
+	var->height = -1,	/* height of picture in mm */
+	var->width = -1,	/* width of picture in mm */
+	var->accel_flags = 0,	/* acceleration flags */
+	var->sync = 0,	/* see FB_SYNC_* */
+	var->rotate = 0,	/* angle we rotate counter clockwise */
+	mfd->op_enable = FALSE;
+
+	switch (mfd->fb_imgType) {
+	case MDP_RGB_565:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 11;
+		var->blue.length = 5;
+		var->green.length = 6;
+		var->red.length = 5;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 2;
+		break;
+
+	case MDP_RGB_888:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 8;
+		var->red.offset = 16;
+		var->blue.length = 8;
+		var->green.length = 8;
+		var->red.length = 8;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 3;
+		break;
+
+	case MDP_ARGB_8888:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 8;
+		var->red.offset = 16;
+		var->blue.length = 8;
+		var->green.length = 8;
+		var->red.length = 8;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		bpp = 3;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		/* ToDo: need to check TV-Out YUV422i framebuffer format */
+		/*       we might need to create new type define */
+		fix->type = FB_TYPE_INTERLEAVED_PLANES;
+		fix->xpanstep = 2;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+
+		/* how about R/G/B offset? */
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 11;
+		var->blue.length = 5;
+		var->green.length = 6;
+		var->red.length = 5;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 2;
+		break;
+
+	default:
+		MSM_FB_ERR("msm_fb_init: fb %d unkown image type!\n",
+			   mfd->index);
+		return ret;
+	}
+
+	/* The adreno GPU hardware requires that the pitch be aligned to
+	   32 pixels for color buffers, so for the cases where the GPU
+	   is writing directly to fb0, the framebuffer pitch
+	   also needs to be 32 pixel aligned */
+
+	if (mfd->index == 0)
+		fix->line_length = ALIGN(panel_info->xres * bpp, 32);
+	else
+		fix->line_length = panel_info->xres * bpp;
+
+	fix->smem_len = fix->line_length * panel_info->yres * mfd->fb_page;
+
+	mfd->var_xres = panel_info->xres;
+	mfd->var_yres = panel_info->yres;
+
+	var->pixclock = mfd->panel_info.clk_rate;
+	mfd->var_pixclock = var->pixclock;
+
+	var->xres = panel_info->xres;
+	var->yres = panel_info->yres;
+	var->xres_virtual = panel_info->xres;
+	var->yres_virtual = panel_info->yres * mfd->fb_page;
+	var->bits_per_pixel = bpp * 8,	/* FrameBuffer color depth */
+		/*
+		 * id field for fb app
+		 */
+	    id = (int *)&mfd->panel;
+
+#if defined(CONFIG_FB_MSM_MDP22)
+	snprintf(fix->id, sizeof(fix->id), "msmfb22_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP30)
+	snprintf(fix->id, sizeof(fix->id), "msmfb30_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP31)
+	snprintf(fix->id, sizeof(fix->id), "msmfb31_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP40)
+	snprintf(fix->id, sizeof(fix->id), "msmfb40_%x", (__u32) *id);
+#else
+	error CONFIG_FB_MSM_MDP undefined !
+#endif
+	 fbi->fbops = &msm_fb_ops;
+	fbi->flags = FBINFO_FLAG_DEFAULT;
+	fbi->pseudo_palette = msm_fb_pseudo_palette;
+
+	mfd->ref_cnt = 0;
+	mfd->sw_currently_refreshing = FALSE;
+	mfd->sw_refreshing_enable = TRUE;
+	mfd->panel_power_on = FALSE;
+
+	mfd->pan_waiting = FALSE;
+	init_completion(&mfd->pan_comp);
+	init_completion(&mfd->refresher_comp);
+	init_MUTEX(&mfd->sem);
+
+	fbram_offset = PAGE_ALIGN((int)fbram)-(int)fbram;
+	fbram += fbram_offset;
+	fbram_phys += fbram_offset;
+	fbram_size -= fbram_offset;
+
+	if (fbram_size < fix->smem_len) {
+		printk(KERN_ERR "error: no more framebuffer memory!\n");
+		return -ENOMEM;
+	}
+
+	fbi->screen_base = fbram;
+	fbi->fix.smem_start = (unsigned long)fbram_phys;
+
+	memset(fbi->screen_base, 0x0, fix->smem_len);
+
+	mfd->op_enable = TRUE;
+	mfd->panel_power_on = FALSE;
+
+	/* cursor memory allocation */
+	if (mfd->cursor_update) {
+		mfd->cursor_buf = dma_alloc_coherent(NULL,
+					MDP_CURSOR_SIZE,
+					(dma_addr_t *) &mfd->cursor_buf_phys,
+					GFP_KERNEL);
+		if (!mfd->cursor_buf)
+			mfd->cursor_update = 0;
+	}
+
+	if (mfd->lut_update) {
+		ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+		if (ret)
+			printk(KERN_ERR "%s: fb_alloc_cmap() failed!\n",
+					__func__);
+	}
+
+	if (register_framebuffer(fbi) < 0) {
+		if (mfd->lut_update)
+			fb_dealloc_cmap(&fbi->cmap);
+
+		if (mfd->cursor_buf)
+			dma_free_coherent(NULL,
+				MDP_CURSOR_SIZE,
+				mfd->cursor_buf,
+				(dma_addr_t) mfd->cursor_buf_phys);
+
+		mfd->op_enable = FALSE;
+		return -EPERM;
+	}
+
+	fbram += fix->smem_len;
+	fbram_phys += fix->smem_len;
+	fbram_size -= fix->smem_len;
+
+	MSM_FB_INFO
+	    ("FrameBuffer[%d] %dx%d size=%d bytes is registered successfully!\n",
+	     mfd->index, fbi->var.xres, fbi->var.yres, fbi->fix.smem_len);
+
+#ifdef CONFIG_FB_MSM_LOGO
+	if (!load_565rle_image(INIT_IMAGE_FILE)) ;	/* Flip buffer */
+#endif
+	ret = 0;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->early_suspend.suspend = msmfb_early_suspend;
+	mfd->early_suspend.resume = msmfb_early_resume;
+	mfd->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 2;
+	register_early_suspend(&mfd->early_suspend);
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+		struct dentry *sub_dir;
+		char sub_name[2];
+
+		root = msm_fb_get_debugfs_root();
+		if (root != NULL) {
+			sub_name[0] = (char)(mfd->index + 0x30);
+			sub_name[1] = '\0';
+			sub_dir = debugfs_create_dir(sub_name, root);
+		} else {
+			sub_dir = NULL;
+		}
+
+		mfd->sub_dir = sub_dir;
+
+		if (sub_dir) {
+			msm_fb_debugfs_file_create(sub_dir, "op_enable",
+						   (u32 *) &mfd->op_enable);
+			msm_fb_debugfs_file_create(sub_dir, "panel_power_on",
+						   (u32 *) &mfd->
+						   panel_power_on);
+			msm_fb_debugfs_file_create(sub_dir, "ref_cnt",
+						   (u32 *) &mfd->ref_cnt);
+			msm_fb_debugfs_file_create(sub_dir, "fb_imgType",
+						   (u32 *) &mfd->fb_imgType);
+			msm_fb_debugfs_file_create(sub_dir,
+						   "sw_currently_refreshing",
+						   (u32 *) &mfd->
+						   sw_currently_refreshing);
+			msm_fb_debugfs_file_create(sub_dir,
+						   "sw_refreshing_enable",
+						   (u32 *) &mfd->
+						   sw_refreshing_enable);
+
+			msm_fb_debugfs_file_create(sub_dir, "xres",
+						   (u32 *) &mfd->panel_info.
+						   xres);
+			msm_fb_debugfs_file_create(sub_dir, "yres",
+						   (u32 *) &mfd->panel_info.
+						   yres);
+			msm_fb_debugfs_file_create(sub_dir, "bpp",
+						   (u32 *) &mfd->panel_info.
+						   bpp);
+			msm_fb_debugfs_file_create(sub_dir, "type",
+						   (u32 *) &mfd->panel_info.
+						   type);
+			msm_fb_debugfs_file_create(sub_dir, "wait_cycle",
+						   (u32 *) &mfd->panel_info.
+						   wait_cycle);
+			msm_fb_debugfs_file_create(sub_dir, "pdest",
+						   (u32 *) &mfd->panel_info.
+						   pdest);
+			msm_fb_debugfs_file_create(sub_dir, "backbuff",
+						   (u32 *) &mfd->panel_info.
+						   fb_num);
+			msm_fb_debugfs_file_create(sub_dir, "clk_rate",
+						   (u32 *) &mfd->panel_info.
+						   clk_rate);
+			msm_fb_debugfs_file_create(sub_dir, "frame_count",
+						   (u32 *) &mfd->panel_info.
+						   frame_count);
+
+
+			switch (mfd->dest) {
+			case DISPLAY_LCD:
+				msm_fb_debugfs_file_create(sub_dir,
+				"vsync_enable",
+				(u32 *)&mfd->panel_info.lcd.vsync_enable);
+				msm_fb_debugfs_file_create(sub_dir,
+				"refx100",
+				(u32 *) &mfd->panel_info.lcd. refx100);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_back_porch",
+				(u32 *) &mfd->panel_info.lcd.v_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_front_porch",
+				(u32 *) &mfd->panel_info.lcd.v_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_pulse_width",
+				(u32 *) &mfd->panel_info.lcd.v_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"hw_vsync_mode",
+				(u32 *) &mfd->panel_info.lcd.hw_vsync_mode);
+				msm_fb_debugfs_file_create(sub_dir,
+				"vsync_notifier_period", (u32 *)
+				&mfd->panel_info.lcd.vsync_notifier_period);
+				break;
+
+			case DISPLAY_LCDC:
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_back_porch",
+				(u32 *) &mfd->panel_info.lcdc.h_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_front_porch",
+				(u32 *) &mfd->panel_info.lcdc.h_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_pulse_width",
+				(u32 *) &mfd->panel_info.lcdc.h_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_back_porch",
+				(u32 *) &mfd->panel_info.lcdc.v_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_front_porch",
+				(u32 *) &mfd->panel_info.lcdc.v_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_pulse_width",
+				(u32 *) &mfd->panel_info.lcdc.v_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"border_clr",
+				(u32 *) &mfd->panel_info.lcdc.border_clr);
+				msm_fb_debugfs_file_create(sub_dir,
+				"underflow_clr",
+				(u32 *) &mfd->panel_info.lcdc.underflow_clr);
+				msm_fb_debugfs_file_create(sub_dir,
+				"hsync_skew",
+				(u32 *) &mfd->panel_info.lcdc.hsync_skew);
+				break;
+
+			default:
+				break;
+			}
+		}
+	}
+#endif /* MSM_FB_ENABLE_DBGFS */
+
+	return ret;
+}
+
+static int msm_fb_open(struct fb_info *info, int user)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->ref_cnt) {
+		mdp_set_dma_pan_info(info, NULL, TRUE);
+
+		if (msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable)) {
+			printk(KERN_ERR "msm_fb_open: can't turn on display!\n");
+			return -1;
+		}
+	}
+
+	mfd->ref_cnt++;
+	return 0;
+}
+
+static int msm_fb_release(struct fb_info *info, int user)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	int ret = 0;
+
+	if (!mfd->ref_cnt) {
+		MSM_FB_INFO("msm_fb_release: try to close unopened fb %d!\n",
+			    mfd->index);
+		return -EINVAL;
+	}
+
+	mfd->ref_cnt--;
+
+	if (!mfd->ref_cnt) {
+		if ((ret =
+		     msm_fb_blank_sub(FB_BLANK_POWERDOWN, info,
+				      mfd->op_enable)) != 0) {
+			printk(KERN_ERR "msm_fb_release: can't turn off display!\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+DECLARE_MUTEX(msm_fb_pan_sem);
+
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct mdp_dirty_region dirty;
+	struct mdp_dirty_region *dirtyPtr = NULL;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if ((!mfd->op_enable) || (!mfd->panel_power_on))
+		return -EPERM;
+
+	if (var->xoffset > (info->var.xres_virtual - info->var.xres))
+		return -EINVAL;
+
+	if (var->yoffset > (info->var.yres_virtual - info->var.yres))
+		return -EINVAL;
+
+	if (info->fix.xpanstep)
+		info->var.xoffset =
+		    (var->xoffset / info->fix.xpanstep) * info->fix.xpanstep;
+
+	if (info->fix.ypanstep)
+		info->var.yoffset =
+		    (var->yoffset / info->fix.ypanstep) * info->fix.ypanstep;
+
+	/* "UPDT" */
+	if (var->reserved[0] == 0x54445055) {
+		dirty.xoffset = var->reserved[1] & 0xffff;
+		dirty.yoffset = (var->reserved[1] >> 16) & 0xffff;
+
+		if ((var->reserved[2] & 0xffff) <= dirty.xoffset)
+			return -EINVAL;
+		if (((var->reserved[2] >> 16) & 0xffff) <= dirty.yoffset)
+			return -EINVAL;
+
+		dirty.width = (var->reserved[2] & 0xffff) - dirty.xoffset;
+		dirty.height =
+		    ((var->reserved[2] >> 16) & 0xffff) - dirty.yoffset;
+		info->var.yoffset = var->yoffset;
+
+		if (dirty.xoffset < 0)
+			return -EINVAL;
+
+		if (dirty.yoffset < 0)
+			return -EINVAL;
+
+		if ((dirty.xoffset + dirty.width) > info->var.xres)
+			return -EINVAL;
+
+		if ((dirty.yoffset + dirty.height) > info->var.yres)
+			return -EINVAL;
+
+		if ((dirty.width <= 0) || (dirty.height <= 0))
+			return -EINVAL;
+
+		dirtyPtr = &dirty;
+	}
+
+	/* Flip */
+	/* A constant value is used to indicate that we should change the DMA
+	   output buffer instead of just panning */
+
+	if (var->reserved[0] == 0x466c6970) {
+		unsigned long length, address;
+		struct file *p_src_file;
+		struct mdp_img imgdata;
+		int bpp;
+
+		if (mfd->allow_set_offset) {
+			imgdata.memory_id = var->reserved[1];
+			imgdata.priv = var->reserved[2];
+
+			/* If there is no memory ID then we want to reset back
+			   to the original fb visibility */
+			if (var->reserved[1]) {
+				if (var->reserved[4] == MDP_BLIT_SRC_GEM) {
+					panic("waaaaaaaaaaaaaah");
+					if ( /*get_gem_img(&imgdata,
+						(unsigned long *) &address,
+						 &length)*/ -1 < 0) {
+						return -1;
+					}
+				} else {
+					/*get_img(&imgdata, info, &address,
+							&length, &p_src_file);*/
+					panic("waaaaaah");
+				}
+				mfd->ibuf.visible_swapped = TRUE;
+			} else {
+				/* Flip back to the original address
+				   adjusted for xoffset and yoffset */
+
+				bpp = info->var.bits_per_pixel / 8;
+				address = (unsigned long) info->fix.smem_start;
+				address += info->var.xoffset * bpp +
+				info->var.yoffset * info->fix.line_length;
+
+				mfd->ibuf.visible_swapped = FALSE;
+			}
+
+			mdp_set_offset_info(info, address,
+				(var->activate == FB_ACTIVATE_VBL));
+
+			mfd->dma_fnc(mfd);
+			return 0;
+		} else
+			return -EINVAL;
+	}
+
+	down(&msm_fb_pan_sem);
+	mdp_set_dma_pan_info(info, dirtyPtr,
+			     (var->activate == FB_ACTIVATE_VBL));
+	mdp_dma_pan_update(info);
+	up(&msm_fb_pan_sem);
+
+	++mfd->panel_info.frame_count;
+	return 0;
+}
+
+static int msm_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (var->rotate != FB_ROTATE_UR)
+		return -EINVAL;
+	if (var->grayscale != info->var.grayscale)
+		return -EINVAL;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		if ((var->green.offset != 5) ||
+			!((var->blue.offset == 11)
+				|| (var->blue.offset == 0)) ||
+			!((var->red.offset == 11)
+				|| (var->red.offset == 0)) ||
+			(var->blue.length != 5) ||
+			(var->green.length != 6) ||
+			(var->red.length != 5) ||
+			(var->blue.msb_right != 0) ||
+			(var->green.msb_right != 0) ||
+			(var->red.msb_right != 0) ||
+			(var->transp.offset != 0) ||
+			(var->transp.length != 0))
+				return -EINVAL;
+		break;
+
+	case 24:
+		if ((var->blue.offset != 0) ||
+			(var->green.offset != 8) ||
+			(var->red.offset != 16) ||
+			(var->blue.length != 8) ||
+			(var->green.length != 8) ||
+			(var->red.length != 8) ||
+			(var->blue.msb_right != 0) ||
+			(var->green.msb_right != 0) ||
+			(var->red.msb_right != 0) ||
+			!(((var->transp.offset == 0) &&
+				(var->transp.length == 0)) ||
+			  ((var->transp.offset == 24) &&
+				(var->transp.length == 8))))
+				return -EINVAL;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((var->xres_virtual <= 0) || (var->yres_virtual <= 0))
+		return -EINVAL;
+
+	if (info->fix.smem_len <
+		(var->xres_virtual*var->yres_virtual*(var->bits_per_pixel/8)))
+		return -EINVAL;
+
+	if ((var->xres == 0) || (var->yres == 0))
+		return -EINVAL;
+
+	if ((var->xres > mfd->panel_info.xres) ||
+		(var->yres > mfd->panel_info.yres))
+		return -EINVAL;
+
+	if (var->xoffset > (var->xres_virtual - var->xres))
+		return -EINVAL;
+
+	if (var->yoffset > (var->yres_virtual - var->yres))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int msm_fb_set_par(struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int old_imgType;
+	int blank = 0;
+
+	old_imgType = mfd->fb_imgType;
+	switch (var->bits_per_pixel) {
+	case 16:
+		if (var->red.offset == 0)
+			mfd->fb_imgType = MDP_BGR_565;
+		else
+			mfd->fb_imgType = MDP_RGB_565;
+		break;
+
+	case 24:
+		if ((var->transp.offset == 0) && (var->transp.length == 0))
+			mfd->fb_imgType = MDP_RGB_888;
+		else if ((var->transp.offset == 24) &&
+				(var->transp.length == 8)) {
+			mfd->fb_imgType = MDP_ARGB_8888;
+			info->var.bits_per_pixel = 32;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((mfd->var_pixclock != var->pixclock) ||
+		(mfd->hw_refresh && ((mfd->fb_imgType != old_imgType) ||
+				(mfd->var_pixclock != var->pixclock) ||
+				(mfd->var_xres != var->xres) ||
+				(mfd->var_yres != var->yres)))) {
+		mfd->var_xres = var->xres;
+		mfd->var_yres = var->yres;
+		mfd->var_pixclock = var->pixclock;
+		blank = 1;
+	}
+
+	if (blank) {
+		msm_fb_blank_sub(FB_BLANK_POWERDOWN, info, mfd->op_enable);
+		msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable);
+	}
+
+	return 0;
+}
+
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd)
+{
+	if (mfd->hw_refresh)
+		return -EPERM;
+
+	if (mfd->sw_currently_refreshing) {
+		down(&mfd->sem);
+		mfd->sw_currently_refreshing = FALSE;
+		up(&mfd->sem);
+
+		/* wait until the refresher finishes the last job */
+		wait_for_completion_killable(&mfd->refresher_comp);
+	}
+
+	return 0;
+}
+
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd)
+{
+	boolean do_refresh;
+
+	if (mfd->hw_refresh)
+		return -EPERM;
+
+	down(&mfd->sem);
+	if ((!mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+		do_refresh = TRUE;
+		mfd->sw_currently_refreshing = TRUE;
+	} else {
+		do_refresh = FALSE;
+	}
+	up(&mfd->sem);
+
+	if (do_refresh)
+		mdp_refresh_screen((unsigned long)mfd);
+
+	return 0;
+}
+
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+	if (p_src_file)
+		put_pmem_file(p_src_file);
+	if (p_dst_file)
+		put_pmem_file(p_dst_file);
+#endif
+}
+
+int mdp_blit(struct fb_info *info, struct mdp_blit_req *req)
+{
+	int ret;
+	struct file *p_src_file = 0, *p_dst_file = 0;
+	if (unlikely(req->src_rect.h == 0 || req->src_rect.w == 0)) {
+		printk(KERN_ERR "mpd_ppp: src img of zero size!\n");
+		return -EINVAL;
+	}
+	if (unlikely(req->dst_rect.h == 0 || req->dst_rect.w == 0))
+		return 0;
+
+	ret = mdp_ppp_blit(info, req, &p_src_file, &p_dst_file);
+	mdp_ppp_put_img(p_src_file, p_dst_file);
+	return ret;
+}
+
+typedef void (*msm_dma_barrier_function_pointer) (void *, size_t);
+
+static inline void msm_fb_dma_barrier_for_rect(struct fb_info *info,
+			struct mdp_img *img, struct mdp_rect *rect,
+			msm_dma_barrier_function_pointer dma_barrier_fp
+			)
+{
+	/*
+	 * Compute the start and end addresses of the rectangles.
+	 * NOTE: As currently implemented, the data between
+	 *       the end of one row and the start of the next is
+	 *       included in the address range rather than
+	 *       doing multiple calls for each row.
+	 */
+
+	char * const pmem_start = info->screen_base;
+/*	int bytes_per_pixel = mdp_get_bytes_per_pixel(img->format);
+	unsigned long start = (unsigned long)pmem_start + img->offset +
+		(img->width * rect->y + rect->x) * bytes_per_pixel;
+	size_t size  = ((rect->h - 1) * img->width + rect->w) * bytes_per_pixel;
+	(*dma_barrier_fp) ((void *) start, size);
+*/
+	panic("waaaaah");
+}
+
+static inline void msm_dma_nc_pre(void)
+{
+	dmb();
+}
+static inline void msm_dma_wt_pre(void)
+{
+	dmb();
+}
+static inline void msm_dma_todevice_wb_pre(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_pre_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_pre(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_pre_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_nc_post(void)
+{
+	dmb();
+}
+
+static inline void msm_dma_fromdevice_wt_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_todevice_wb_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+/*
+ * Do the write barriers required to guarantee data is committed to RAM
+ * (from CPU cache or internal buffers) before a DMA operation starts.
+ * NOTE: As currently implemented, the data between
+ *       the end of one row and the start of the next is
+ *       included in the address range rather than
+ *       doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_before_dma(struct fb_info *info,
+		struct mdp_blit_req *req_list,
+		int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+	int i;
+
+	/*
+	 * Normally, do the requested barriers for each address
+	 * range that corresponds to a rectangle.
+	 *
+	 * But if at least one write barrier is requested for data
+	 * going to or from the device but no address range is
+	 * needed for that barrier, then do the barrier, but do it
+	 * only once, no matter how many requests there are.
+	 */
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	switch (mfd->mdp_fb_page_protection)	{
+	default:
+	case MDP_FB_PAGE_PROTECTION_NONCACHED:
+	case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_START)) {
+				msm_dma_nc_pre();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_START)) {
+				msm_dma_wt_pre();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_START)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].src),
+						&(req_list[i].src_rect),
+						msm_dma_todevice_wb_pre
+						);
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_todevice_wb_pre
+						);
+			}
+		}
+		break;
+	}
+#else
+	dmb();
+#endif
+}
+
+
+/*
+ * Do the write barriers required to guarantee data will be re-read from RAM by
+ * the CPU after a DMA operation ends.
+ * NOTE: As currently implemented, the data between
+ *       the end of one row and the start of the next is
+ *       included in the address range rather than
+ *       doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_after_dma(struct fb_info *info,
+		struct mdp_blit_req *req_list,
+		int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+	int i;
+
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	switch (mfd->mdp_fb_page_protection)	{
+	default:
+	case MDP_FB_PAGE_PROTECTION_NONCACHED:
+	case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_END)) {
+				msm_dma_nc_post();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_END)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_fromdevice_wt_post
+						);
+			}
+		}
+		break;
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_END)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_fromdevice_wb_post
+						);
+			}
+		}
+		break;
+	}
+#else
+	dmb();
+#endif
+}
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+	struct mdp_blit_req *req_list, int req_list_count)
+{
+	BUG_ON(!info);
+
+	/*
+	 * Ensure that CPU cache and other internal CPU state is
+	 * updated to reflect any change in memory modified by MDP blit
+	 * DMA.
+	 */
+	msm_fb_ensure_memory_coherency_after_dma(info,
+			req_list, req_list_count);
+}
+
+static int msmfb_async_blit(struct fb_info *info, void __user *p)
+{
+	/*
+	 * CAUTION: The names of the struct types intentionally *DON'T* match
+	 * the names of the variables declared -- they appear to be swapped.
+	 * Read the code carefully and you should see that the variable names
+	 * make sense.
+	 */
+	const int MAX_LIST_WINDOW = 16;
+	struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+	struct mdp_blit_req_list req_list_header;
+
+	int count, i, req_list_count;
+
+	/* Get the count size for the total BLIT request. */
+	if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+		return -EFAULT;
+	p += sizeof(req_list_header);
+	count = req_list_header.count;
+	while (count > 0) {
+		/*
+		 * Access the requests through a narrow window to decrease copy
+		 * overhead and make larger requests accessible to the
+		 * coherency management code.
+		 * NOTE: The window size is intended to be larger than the
+		 *       typical request size, but not require more than 2
+		 *       kbytes of stack storage.
+		 */
+		req_list_count = count;
+		if (req_list_count > MAX_LIST_WINDOW)
+			req_list_count = MAX_LIST_WINDOW;
+		if (copy_from_user(&req_list, p,
+				sizeof(struct mdp_blit_req)*req_list_count))
+			return -EFAULT;
+
+		/*
+		 * Ensure that any data CPU may have previously written to
+		 * internal state (but not yet committed to memory) is
+		 * guaranteed to be committed to memory now.
+		 */
+		msm_fb_ensure_memory_coherency_before_dma(info,
+				req_list, req_list_count);
+
+		/*
+		 * Do the blit DMA, if required -- returning early only if
+		 * there is a failure.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags & MDP_NO_BLIT)) {
+				int ret = 0;
+				struct mdp_ppp_djob *job = NULL;
+
+				if (unlikely(req_list[i].src_rect.h == 0 ||
+					req_list[i].src_rect.w == 0)) {
+					MSM_FB_ERR("mpd_ppp: "
+						"src img of zero size!\n");
+					return -EINVAL;
+				}
+
+				if (unlikely(req_list[i].dst_rect.h == 0 ||
+					req_list[i].dst_rect.w == 0))
+					continue;
+
+				/* create a new display job */
+				job = mdp_ppp_new_djob();
+				if (unlikely(!job))
+					return -ENOMEM;
+
+				job->info = info;
+				memcpy(&job->req, &req_list[i],
+					sizeof(struct mdp_blit_req));
+
+				/* Do the actual blit. */
+				ret = mdp_ppp_blit(info, &job->req,
+					&job->p_src_file, &job->p_dst_file);
+
+				/*
+				 * Note that early returns don't guarantee
+				 * memory coherency.
+				 */
+				if (ret || mdp_ppp_get_ret_code()) {
+					mdp_ppp_clear_curr_djob();
+					return ret;
+				}
+			}
+		}
+
+		/* Go to next window of requests. */
+		count -= req_list_count;
+		p += sizeof(struct mdp_blit_req)*req_list_count;
+	}
+	return 0;
+}
+#else
+
+/*
+ * NOTE: The userspace issues blit operations in a sequence, the sequence
+ * start with a operation marked START and ends in an operation marked
+ * END. It is guranteed by the userspace that all the blit operations
+ * between START and END are only within the regions of areas designated
+ * by the START and END operations and that the userspace doesnt modify
+ * those areas. Hence it would be enough to perform barrier/cache operations
+ * only on the START and END operations.
+ */
+static int msmfb_blit(struct fb_info *info, void __user *p)
+{
+	/*
+	 * CAUTION: The names of the struct types intentionally *DON'T* match
+	 * the names of the variables declared -- they appear to be swapped.
+	 * Read the code carefully and you should see that the variable names
+	 * make sense.
+	 */
+	const int MAX_LIST_WINDOW = 16;
+	struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+	struct mdp_blit_req_list req_list_header;
+
+	int count, i, req_list_count;
+
+	/* Get the count size for the total BLIT request. */
+	if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+		return -EFAULT;
+	p += sizeof(req_list_header);
+	count = req_list_header.count;
+	while (count > 0) {
+		/*
+		 * Access the requests through a narrow window to decrease copy
+		 * overhead and make larger requests accessible to the
+		 * coherency management code.
+		 * NOTE: The window size is intended to be larger than the
+		 *       typical request size, but not require more than 2
+		 *       kbytes of stack storage.
+		 */
+		req_list_count = count;
+		if (req_list_count > MAX_LIST_WINDOW)
+			req_list_count = MAX_LIST_WINDOW;
+		if (copy_from_user(&req_list, p,
+				sizeof(struct mdp_blit_req)*req_list_count))
+			return -EFAULT;
+
+		/*
+		 * Ensure that any data CPU may have previously written to
+		 * internal state (but not yet committed to memory) is
+		 * guaranteed to be committed to memory now.
+		 */
+		msm_fb_ensure_memory_coherency_before_dma(info,
+				req_list, req_list_count);
+
+		/*
+		 * Do the blit DMA, if required -- returning early only if
+		 * there is a failure.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags & MDP_NO_BLIT)) {
+				/* Do the actual blit. */
+				int ret = mdp_blit(info, &(req_list[i]));
+
+				/*
+				 * Note that early returns don't guarantee
+				 * memory coherency.
+				 */
+				if (ret)
+					return ret;
+			}
+		}
+
+		/*
+		 * Ensure that CPU cache and other internal CPU state is
+		 * updated to reflect any change in memory modified by MDP blit
+		 * DMA.
+		 */
+		msm_fb_ensure_memory_coherency_after_dma(info,
+				req_list,
+				req_list_count);
+
+		/* Go to next window of requests. */
+		count -= req_list_count;
+		p += sizeof(struct mdp_blit_req)*req_list_count;
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+static int msmfb_overlay_get(struct fb_info *info, void __user *p)
+{
+	struct mdp_overlay req;
+	int ret;
+
+	if (copy_from_user(&req, p, sizeof(req)))
+		return -EFAULT;
+
+	ret = mdp4_overlay_get(info, &req);
+	if (ret) {
+		printk(KERN_ERR "%s: ioctl failed \n",
+			__func__);
+		return ret;
+	}
+	if (copy_to_user(p, &req, sizeof(req))) {
+		printk(KERN_ERR "%s: copy2user failed \n",
+			__func__);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int msmfb_overlay_set(struct fb_info *info, void __user *p)
+{
+	struct mdp_overlay req;
+	int ret;
+
+	if (copy_from_user(&req, p, sizeof(req)))
+		return -EFAULT;
+
+	ret = mdp4_overlay_set(info, &req);
+	if (ret) {
+		printk(KERN_ERR "%s:ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	if (copy_to_user(p, &req, sizeof(req))) {
+		printk(KERN_ERR "%s: copy2user failed \n",
+			__func__);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int msmfb_overlay_unset(struct fb_info *info, unsigned long *argp)
+{
+	int	ret, ndx;
+
+	ret = copy_from_user(&ndx, argp, sizeof(ndx));
+	if (ret) {
+		printk(KERN_ERR "%s:msmfb_overlay_unset ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	return mdp4_overlay_unset(info, ndx);
+}
+
+static int msmfb_overlay_play(struct fb_info *info, unsigned long *argp)
+{
+	int	ret;
+	struct msmfb_overlay_data req;
+	struct file *p_src_file = 0;
+
+	ret = copy_from_user(&req, argp, sizeof(req));
+	if (ret) {
+		printk(KERN_ERR "%s:msmfb_overlay_play ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	ret = mdp4_overlay_play(info, &req, &p_src_file);
+
+	if (p_src_file)
+		put_pmem_file(p_src_file);
+
+	return ret;
+}
+
+#endif
+
+DECLARE_MUTEX(msm_fb_ioctl_ppp_sem);
+DEFINE_MUTEX(msm_fb_ioctl_lut_sem);
+DEFINE_MUTEX(msm_fb_ioctl_hist_sem);
+
+/* Set color conversion matrix from user space */
+
+#ifndef CONFIG_FB_MSM_MDP40
+static void msmfb_set_color_conv(struct mdp_ccs *p)
+{
+	int i;
+
+	if (p->direction == MDP_CCS_RGB2YUV) {
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		/* RGB->YUV primary forward matrix */
+		for (i = 0; i < MDP_CCS_SIZE; i++)
+			writel(p->ccs[i], MDP_CSC_PFMVn(i));
+
+		#ifdef CONFIG_FB_MSM_MDP31
+		for (i = 0; i < MDP_BV_SIZE; i++)
+			writel(p->bv[i], MDP_CSC_POST_BV2n(i));
+		#endif
+
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	} else {
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		/* YUV->RGB primary reverse matrix */
+		for (i = 0; i < MDP_CCS_SIZE; i++)
+			writel(p->ccs[i], MDP_CSC_PRMVn(i));
+		for (i = 0; i < MDP_BV_SIZE; i++)
+			writel(p->bv[i], MDP_CSC_PRE_BV1n(i));
+
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	}
+}
+#endif
+
+
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	void __user *argp = (void __user *)arg;
+	struct fb_cursor cursor;
+	struct fb_cmap cmap;
+	struct mdp_histogram hist;
+#ifndef CONFIG_FB_MSM_MDP40
+	struct mdp_ccs ccs_matrix;
+#endif
+	struct mdp_page_protection fb_page_protection;
+	int ret = 0;
+
+	if (!mfd->op_enable)
+		return -EPERM;
+
+	switch (cmd) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+	case MSMFB_OVERLAY_GET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_get(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_SET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_set(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_UNSET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_unset(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_PLAY:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_play(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+#endif
+	case MSMFB_BLIT:
+		down(&msm_fb_ioctl_ppp_sem);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+		ret = msmfb_async_blit(info, argp);
+		mdp_ppp_wait(); /* Wait for all blits to be finished. */
+#else
+		ret = msmfb_blit(info, argp);
+#endif
+		up(&msm_fb_ioctl_ppp_sem);
+
+		break;
+
+	/* Ioctl for setting ccs matrix from user space */
+	case MSMFB_SET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+		ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix));
+		if (ret) {
+			printk(KERN_ERR
+				"%s:MSMFB_SET_CCS_MATRIX ioctl failed \n",
+				__func__);
+			return ret;
+		}
+
+		down(&msm_fb_ioctl_ppp_sem);
+		if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+			mdp_ccs_rgb2yuv = ccs_matrix;
+		else
+			mdp_ccs_yuv2rgb = ccs_matrix;
+
+		msmfb_set_color_conv(&ccs_matrix) ;
+		up(&msm_fb_ioctl_ppp_sem);
+#else
+		ret = -EINVAL;
+#endif
+
+		break;
+
+	/* Ioctl for getting ccs matrix to user space */
+	case MSMFB_GET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+		ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix)) ;
+		if (ret) {
+			printk(KERN_ERR
+				"%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+				 __func__);
+			return ret;
+		}
+
+		down(&msm_fb_ioctl_ppp_sem);
+		if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+			ccs_matrix = mdp_ccs_rgb2yuv;
+		 else
+			ccs_matrix =  mdp_ccs_yuv2rgb;
+
+		ret = copy_to_user(argp, &ccs_matrix, sizeof(ccs_matrix));
+
+		if (ret)	{
+			printk(KERN_ERR
+				"%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+				 __func__);
+			return ret ;
+		}
+		up(&msm_fb_ioctl_ppp_sem);
+#else
+		ret = -EINVAL;
+#endif
+
+		break;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	case MSMFB_ASYNC_BLIT:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_async_blit(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+
+	case MSMFB_BLIT_FLUSH:
+		down(&msm_fb_ioctl_ppp_sem);
+		mdp_ppp_wait();
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+#endif
+
+	case MSMFB_GRP_DISP:
+#ifdef CONFIG_FB_MSM_MDP22
+		{
+			unsigned long grp_id;
+
+			ret = copy_from_user(&grp_id, argp, sizeof(grp_id));
+			if (ret)
+				return ret;
+
+			mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+			writel(grp_id, MDP_FULL_BYPASS_WORD43);
+			mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF,
+				      FALSE);
+			break;
+		}
+#else
+		return -EFAULT;
+#endif
+	case MSMFB_SUSPEND_SW_REFRESHER:
+		if (!mfd->panel_power_on)
+			return -EPERM;
+
+		mfd->sw_refreshing_enable = FALSE;
+		ret = msm_fb_stop_sw_refresher(mfd);
+		break;
+
+	case MSMFB_RESUME_SW_REFRESHER:
+		if (!mfd->panel_power_on)
+			return -EPERM;
+
+		mfd->sw_refreshing_enable = TRUE;
+		ret = msm_fb_resume_sw_refresher(mfd);
+		break;
+
+	case MSMFB_CURSOR:
+		ret = copy_from_user(&cursor, argp, sizeof(cursor));
+		if (ret)
+			return ret;
+
+		ret = msm_fb_cursor(info, &cursor);
+		break;
+
+	case MSMFB_SET_LUT:
+		ret = copy_from_user(&cmap, argp, sizeof(cmap));
+		if (ret)
+			return ret;
+
+		mutex_lock(&msm_fb_ioctl_lut_sem);
+		ret = msm_fb_set_lut(&cmap, info);
+		mutex_unlock(&msm_fb_ioctl_lut_sem);
+		break;
+
+	case MSMFB_HISTOGRAM:
+		if (!mfd->do_histogram)
+			return -ENODEV;
+
+		ret = copy_from_user(&hist, argp, sizeof(hist));
+		if (ret)
+			return ret;
+
+		mutex_lock(&msm_fb_ioctl_hist_sem);
+		ret = mfd->do_histogram(info, &hist);
+		mutex_unlock(&msm_fb_ioctl_hist_sem);
+		break;
+
+	case MSMFB_GET_PAGE_PROTECTION:
+		fb_page_protection.page_protection
+			= mfd->mdp_fb_page_protection;
+		ret = copy_to_user(argp, &fb_page_protection,
+				sizeof(fb_page_protection));
+		if (ret)
+				return ret;
+		break;
+
+	case MSMFB_SET_PAGE_PROTECTION:
+#ifdef CONFIG_ARCH_QSD8X50
+		ret = copy_from_user(&fb_page_protection, argp,
+				sizeof(fb_page_protection));
+		if (ret)
+				return ret;
+
+		/* Validate the proposed page protection settings. */
+		switch (fb_page_protection.page_protection)	{
+		case MDP_FB_PAGE_PROTECTION_NONCACHED:
+		case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		/* Write-back cache (read allocate)  */
+		case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+		/* Write-back cache (write allocate) */
+		case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+			mfd->mdp_fb_page_protection =
+				fb_page_protection.page_protection;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+#else
+		/*
+		 * Don't allow caching until 7k DMA cache operations are
+		 * available.
+		 */
+		ret = -EINVAL;
+#endif
+		break;
+
+	default:
+		MSM_FB_INFO("MDP: unknown ioctl (cmd=%d) received!\n", cmd);
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int msm_fb_register_driver(void)
+{
+	return platform_driver_register(&msm_fb_driver);
+}
+
+void msm_fb_add_device(struct platform_device *pdev)
+{
+	struct msm_fb_panel_data *pdata;
+	struct platform_device *this_dev = NULL;
+	struct fb_info *fbi;
+	struct msm_fb_data_type *mfd = NULL;
+	u32 type, id, fb_num;
+
+	if (!pdev)
+		return;
+	id = pdev->id;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return;
+	type = pdata->panel_info.type;
+	fb_num = pdata->panel_info.fb_num;
+
+	if (fb_num <= 0)
+		return;
+
+	if (fbi_list_index >= MAX_FBI_LIST) {
+		printk(KERN_ERR "msm_fb: no more framebuffer info list!\n");
+		return;
+	}
+	/*
+	 * alloc panel device data
+	 */
+	this_dev = msm_fb_device_alloc(pdata, type, id);
+
+	if (!this_dev) {
+		printk(KERN_ERR
+		"%s: msm_fb_device_alloc failed!\n", __func__);
+		return;
+	}
+
+	/*
+	 * alloc framebuffer info + par data
+	 */
+	fbi = framebuffer_alloc(sizeof(struct msm_fb_data_type), NULL);
+	if (fbi == NULL) {
+		platform_device_put(this_dev);
+		printk(KERN_ERR "msm_fb: can't alloca framebuffer info data!\n");
+		return;
+	}
+
+	mfd = (struct msm_fb_data_type *)fbi->par;
+	mfd->key = MFD_KEY;
+	mfd->fbi = fbi;
+	mfd->panel.type = type;
+	mfd->panel.id = id;
+	mfd->fb_page = fb_num;
+	mfd->index = fbi_list_index;
+	mfd->mdp_fb_page_protection = MDP_FB_PAGE_PROTECTION_WRITECOMBINE;
+
+	/* link to the latest pdev */
+	mfd->pdev = this_dev;
+
+	mfd_list[mfd_list_index++] = mfd;
+	fbi_list[fbi_list_index++] = fbi;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(this_dev, mfd);
+
+	if (platform_device_add(this_dev)) {
+		printk(KERN_ERR "msm_fb: platform_device_add failed!\n");
+		platform_device_put(this_dev);
+		framebuffer_release(fbi);
+		fbi_list_index--;
+		return;
+	}
+}
+EXPORT_SYMBOL(msm_fb_add_device);
+
+int __init msm_fb_init(void)
+{
+	int rc = -ENODEV;
+
+	if (msm_fb_register_driver())
+		return rc;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+
+		if ((root = msm_fb_get_debugfs_root()) != NULL) {
+			msm_fb_debugfs_file_create(root,
+						   "msm_fb_msg_printing_level",
+						   (u32 *) &msm_fb_msg_level);
+			msm_fb_debugfs_file_create(root,
+						   "mddi_msg_printing_level",
+						   (u32 *) &mddi_msg_level);
+			msm_fb_debugfs_file_create(root, "msm_fb_debug_enabled",
+						   (u32 *) &msm_fb_debug_enabled);
+		}
+	}
+#endif
+
+	return 0;
+}
+
+module_init(msm_fb_init);
diff --git a/drivers/staging/msm/msm_fb.h b/drivers/staging/msm/msm_fb.h
new file mode 100644
index 00000000000..f9391380047
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.h
@@ -0,0 +1,174 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_H
+#define MSM_FB_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <mach/board.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/memory.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/hrtimer.h>
+
+#include <linux/fb.h>
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+#endif
+
+#include "msm_fb_panel.h"
+#include "mdp.h"
+
+#define MSM_FB_DEFAULT_PAGE_SIZE 2
+#define MFD_KEY  0x11161126
+#define MSM_FB_MAX_DEV_LIST 32
+
+struct disp_info_type_suspend {
+	boolean op_enable;
+	boolean sw_refreshing_enable;
+	boolean panel_power_on;
+};
+
+struct msm_fb_data_type {
+	__u32 key;
+	__u32 index;
+	__u32 ref_cnt;
+	__u32 fb_page;
+
+	panel_id_type panel;
+	struct msm_panel_info panel_info;
+
+	DISP_TARGET dest;
+	struct fb_info *fbi;
+
+	boolean op_enable;
+	uint32 fb_imgType;
+	boolean sw_currently_refreshing;
+	boolean sw_refreshing_enable;
+	boolean hw_refresh;
+
+	MDPIBUF ibuf;
+	boolean ibuf_flushed;
+	struct timer_list refresh_timer;
+	struct completion refresher_comp;
+
+	boolean pan_waiting;
+	struct completion pan_comp;
+
+	/* vsync */
+	boolean use_mdp_vsync;
+	__u32 vsync_gpio;
+	__u32 total_lcd_lines;
+	__u32 total_porch_lines;
+	__u32 lcd_ref_usec_time;
+	__u32 refresh_timer_duration;
+
+	struct hrtimer dma_hrtimer;
+
+	boolean panel_power_on;
+	struct work_struct dma_update_worker;
+	struct semaphore sem;
+
+	struct timer_list vsync_resync_timer;
+	boolean vsync_handler_pending;
+	struct work_struct vsync_resync_worker;
+
+	ktime_t last_vsync_timetick;
+
+	__u32 *vsync_width_boundary;
+
+	unsigned int pmem_id;
+	struct disp_info_type_suspend suspend;
+
+	__u32 channel_irq;
+
+	struct mdp_dma_data *dma;
+	void (*dma_fnc) (struct msm_fb_data_type *mfd);
+	int (*cursor_update) (struct fb_info *info,
+			      struct fb_cursor *cursor);
+	int (*lut_update) (struct fb_info *info,
+			      struct fb_cmap *cmap);
+	int (*do_histogram) (struct fb_info *info,
+			      struct mdp_histogram *hist);
+	void *cursor_buf;
+	void *cursor_buf_phys;
+
+	void *cmd_port;
+	void *data_port;
+	void *data_port_phys;
+
+	__u32 bl_level;
+
+	struct platform_device *pdev;
+
+	__u32 var_xres;
+	__u32 var_yres;
+	__u32 var_pixclock;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	struct dentry *sub_dir;
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	struct early_suspend early_suspend;
+	struct early_suspend mddi_early_suspend;
+	struct early_suspend mddi_ext_early_suspend;
+#endif
+	u32 mdp_fb_page_protection;
+	int allow_set_offset;
+};
+
+struct dentry *msm_fb_get_debugfs_root(void);
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+				u32 *var);
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl,
+				u32 save);
+
+void msm_fb_add_device(struct platform_device *pdev);
+
+int msm_fb_detect_client(const char *name);
+
+#ifdef CONFIG_FB_BACKLIGHT
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd);
+#endif
+
+#endif /* MSM_FB_H */
diff --git a/drivers/staging/msm/msm_fb_bl.c b/drivers/staging/msm/msm_fb_bl.c
new file mode 100644
index 00000000000..033fc9486e0
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_bl.c
@@ -0,0 +1,79 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/backlight.h>
+
+#include "msm_fb.h"
+
+static int msm_fb_bl_get_brightness(struct backlight_device *pbd)
+{
+	return pbd->props.brightness;
+}
+
+static int msm_fb_bl_update_status(struct backlight_device *pbd)
+{
+	struct msm_fb_data_type *mfd = bl_get_data(pbd);
+	__u32 bl_lvl;
+
+	bl_lvl = pbd->props.brightness;
+	bl_lvl = mfd->fbi->bl_curve[bl_lvl];
+	msm_fb_set_backlight(mfd, bl_lvl, 1);
+	return 0;
+}
+
+static struct backlight_ops msm_fb_bl_ops = {
+	.get_brightness = msm_fb_bl_get_brightness,
+	.update_status = msm_fb_bl_update_status,
+};
+
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd)
+{
+	struct msm_fb_panel_data *pdata;
+	struct backlight_device *pbd;
+	struct fb_info *fbi;
+	char name[16];
+
+	fbi = mfd->fbi;
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_backlight)) {
+		snprintf(name, sizeof(name), "msmfb_bl%d", mfd->index);
+		pbd =
+		    backlight_device_register(name, fbi->dev, mfd,
+					      &msm_fb_bl_ops);
+		if (!IS_ERR(pbd)) {
+			fbi->bl_dev = pbd;
+			fb_bl_default_curve(fbi,
+					    0,
+					    mfd->panel_info.bl_min,
+					    mfd->panel_info.bl_max);
+			pbd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+			pbd->props.brightness = FB_BACKLIGHT_LEVELS - 1;
+			backlight_update_status(pbd);
+		} else {
+			fbi->bl_dev = NULL;
+			printk(KERN_ERR "msm_fb: backlight_device_register failed!\n");
+		}
+	}
+}
diff --git a/drivers/staging/msm/msm_fb_def.h b/drivers/staging/msm/msm_fb_def.h
new file mode 100644
index 00000000000..6de44093742
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_def.h
@@ -0,0 +1,201 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_DEF_H
+#define MSM_FB_DEF_H
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/platform_device.h>
+
+typedef s64 int64;
+typedef s32 int32;
+typedef s16 int16;
+typedef s8 int8;
+
+typedef u64 uint64;
+typedef u32 uint32;
+typedef u16 uint16;
+typedef u8 uint8;
+
+typedef s32 int4;
+typedef s16 int2;
+typedef s8 int1;
+
+typedef u32 uint4;
+typedef u16 uint2;
+typedef u8 uint1;
+
+typedef u32 dword;
+typedef u16 word;
+typedef u8 byte;
+
+typedef unsigned int boolean;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define MSM_FB_ENABLE_DBGFS
+#define FEATURE_MDDI
+
+#define outp32(addr, val) writel(val, addr)
+#define outp16(addr, val) writew(val, addr)
+#define outp8(addr, val) writeb(val, addr)
+#define outp(addr, val) outp32(addr, val)
+
+#ifndef MAX
+#define  MAX( x, y ) (((x) > (y)) ? (x) : (y))
+#endif
+
+#ifndef MIN
+#define  MIN( x, y ) (((x) < (y)) ? (x) : (y))
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+#define inp32(addr) readl(addr)
+#define inp16(addr) readw(addr)
+#define inp8(addr) readb(addr)
+#define inp(addr) inp32(addr)
+
+#define inpw(port)             readw(port)
+#define outpw(port, val)       writew(val, port)
+#define inpdw(port)            readl(port)
+#define outpdw(port, val)      writel(val, port)
+
+
+#define clk_busy_wait(x) msleep_interruptible((x)/1000)
+
+#define memory_barrier()
+
+#define assert(expr) \
+	if(!(expr)) { \
+		printk(KERN_ERR "msm_fb: assertion failed! %s,%s,%s,line=%d\n",\
+			#expr, __FILE__, __func__, __LINE__); \
+	}
+
+#define ASSERT(x)   assert(x)
+
+#define DISP_EBI2_LOCAL_DEFINE
+#ifdef DISP_EBI2_LOCAL_DEFINE
+#define LCD_PRIM_BASE_PHYS 0x98000000
+#define LCD_SECD_BASE_PHYS 0x9c000000
+#define EBI2_PRIM_LCD_RS_PIN 0x20000
+#define EBI2_SECD_LCD_RS_PIN 0x20000
+
+#define EBI2_PRIM_LCD_CLR 0xC0
+#define EBI2_PRIM_LCD_SEL 0x40
+
+#define EBI2_SECD_LCD_CLR 0x300
+#define EBI2_SECD_LCD_SEL 0x100
+#endif
+
+extern u32 msm_fb_msg_level;
+
+/*
+ * Message printing priorities:
+ * LEVEL 0 KERN_EMERG (highest priority)
+ * LEVEL 1 KERN_ALERT
+ * LEVEL 2 KERN_CRIT
+ * LEVEL 3 KERN_ERR
+ * LEVEL 4 KERN_WARNING
+ * LEVEL 5 KERN_NOTICE
+ * LEVEL 6 KERN_INFO
+ * LEVEL 7 KERN_DEBUG (Lowest priority)
+ */
+#define MSM_FB_EMERG(msg, ...)    \
+	if (msm_fb_msg_level > 0)  \
+		printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MSM_FB_ALERT(msg, ...)    \
+	if (msm_fb_msg_level > 1)  \
+		printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MSM_FB_CRIT(msg, ...)    \
+	if (msm_fb_msg_level > 2)  \
+		printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MSM_FB_ERR(msg, ...)    \
+	if (msm_fb_msg_level > 3)  \
+		printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MSM_FB_WARNING(msg, ...)    \
+	if (msm_fb_msg_level > 4)  \
+		printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MSM_FB_NOTICE(msg, ...)    \
+	if (msm_fb_msg_level > 5)  \
+		printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MSM_FB_INFO(msg, ...)    \
+	if (msm_fb_msg_level > 6)  \
+		printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MSM_FB_DEBUG(msg, ...)    \
+	if (msm_fb_msg_level > 7)  \
+		printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#ifdef MSM_FB_C
+unsigned char *msm_mdp_base;
+unsigned char *msm_pmdh_base;
+unsigned char *msm_emdh_base;
+#else
+extern unsigned char *msm_mdp_base;
+extern unsigned char *msm_pmdh_base;
+extern unsigned char *msm_emdh_base;
+#endif
+
+#endif /* MSM_FB_DEF_H */
diff --git a/drivers/staging/msm/msm_fb_panel.c b/drivers/staging/msm/msm_fb_panel.c
new file mode 100644
index 00000000000..b17a239a1bc
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb_panel.h"
+
+int panel_next_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_panel_data *pdata;
+	struct msm_fb_panel_data *next_pdata;
+	struct platform_device *next_pdev;
+
+	pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+	if (pdata) {
+		next_pdev = pdata->next;
+		if (next_pdev) {
+			next_pdata =
+			    (struct msm_fb_panel_data *)next_pdev->dev.
+			    platform_data;
+			if ((next_pdata) && (next_pdata->on))
+				ret = next_pdata->on(next_pdev);
+		}
+	}
+
+	return ret;
+}
+
+int panel_next_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_panel_data *pdata;
+	struct msm_fb_panel_data *next_pdata;
+	struct platform_device *next_pdev;
+
+	pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+	if (pdata) {
+		next_pdev = pdata->next;
+		if (next_pdev) {
+			next_pdata =
+			    (struct msm_fb_panel_data *)next_pdev->dev.
+			    platform_data;
+			if ((next_pdata) && (next_pdata->on))
+				ret = next_pdata->off(next_pdev);
+		}
+	}
+
+	return ret;
+}
+
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+						u32 type, u32 id)
+{
+	struct platform_device *this_dev = NULL;
+	char dev_name[16];
+
+	switch (type) {
+	case EBI2_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "ebi2_lcd");
+		break;
+
+	case MDDI_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "mddi");
+		break;
+
+	case EXT_MDDI_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "mddi_ext");
+		break;
+
+	case TV_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "tvenc");
+		break;
+
+	case HDMI_PANEL:
+	case LCDC_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "lcdc");
+		break;
+
+	default:
+		return NULL;
+	}
+
+	if (pdata != NULL)
+		pdata->next = NULL;
+	else
+		return NULL;
+
+	this_dev =
+	    platform_device_alloc(dev_name, ((u32) type << 16) | (u32) id);
+
+	if (this_dev) {
+		if (platform_device_add_data
+		    (this_dev, pdata, sizeof(struct msm_fb_panel_data))) {
+			printk
+			    ("msm_fb_device_alloc: platform_device_add_data failed!\n");
+			platform_device_put(this_dev);
+			return NULL;
+		}
+	}
+
+	return this_dev;
+}
diff --git a/drivers/staging/msm/msm_fb_panel.h b/drivers/staging/msm/msm_fb_panel.h
new file mode 100644
index 00000000000..ab458310c3a
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.h
@@ -0,0 +1,145 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_PANEL_H
+#define MSM_FB_PANEL_H
+
+#include "msm_fb_def.h"
+
+struct msm_fb_data_type;
+
+typedef void (*msm_fb_vsync_handler_type) (void *arg);
+
+/* panel id type */
+typedef struct panel_id_s {
+	uint16 id;
+	uint16 type;
+} panel_id_type;
+
+/* panel type list */
+#define NO_PANEL       0xffff	/* No Panel */
+#define MDDI_PANEL     1	/* MDDI */
+#define EBI2_PANEL     2	/* EBI2 */
+#define LCDC_PANEL     3	/* internal LCDC type */
+#define EXT_MDDI_PANEL 4	/* Ext.MDDI */
+#define TV_PANEL       5	/* TV */
+#define HDMI_PANEL     6	/* HDMI TV */
+
+/* panel class */
+typedef enum {
+	DISPLAY_LCD = 0,	/* lcd = ebi2/mddi */
+	DISPLAY_LCDC,		/* lcdc */
+	DISPLAY_TV,		/* TV Out */
+	DISPLAY_EXT_MDDI,	/* External MDDI */
+} DISP_TARGET;
+
+/* panel device locaiton */
+typedef enum {
+	DISPLAY_1 = 0,		/* attached as first device */
+	DISPLAY_2,		/* attached on second device */
+	MAX_PHYS_TARGET_NUM,
+} DISP_TARGET_PHYS;
+
+/* panel info type */
+struct lcd_panel_info {
+	__u32 vsync_enable;
+	__u32 refx100;
+	__u32 v_back_porch;
+	__u32 v_front_porch;
+	__u32 v_pulse_width;
+	__u32 hw_vsync_mode;
+	__u32 vsync_notifier_period;
+};
+
+struct lcdc_panel_info {
+	__u32 h_back_porch;
+	__u32 h_front_porch;
+	__u32 h_pulse_width;
+	__u32 v_back_porch;
+	__u32 v_front_porch;
+	__u32 v_pulse_width;
+	__u32 border_clr;
+	__u32 underflow_clr;
+	__u32 hsync_skew;
+};
+
+struct mddi_panel_info {
+	__u32 vdopkt;
+};
+
+struct msm_panel_info {
+	__u32 xres;
+	__u32 yres;
+	__u32 bpp;
+	__u32 type;
+	__u32 wait_cycle;
+	DISP_TARGET_PHYS pdest;
+	__u32 bl_max;
+	__u32 bl_min;
+	__u32 fb_num;
+	__u32 clk_rate;
+	__u32 clk_min;
+	__u32 clk_max;
+	__u32 frame_count;
+
+	union {
+		struct mddi_panel_info mddi;
+	};
+
+	union {
+		struct lcd_panel_info lcd;
+		struct lcdc_panel_info lcdc;
+	};
+};
+
+struct msm_fb_panel_data {
+	struct msm_panel_info panel_info;
+	void (*set_rect) (int x, int y, int xres, int yres);
+	void (*set_vsync_notifier) (msm_fb_vsync_handler_type, void *arg);
+	void (*set_backlight) (struct msm_fb_data_type *);
+
+	/* function entry chain */
+	int (*on) (struct platform_device *pdev);
+	int (*off) (struct platform_device *pdev);
+	struct platform_device *next;
+};
+
+/*===========================================================================
+  FUNCTIONS PROTOTYPES
+============================================================================*/
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+						u32 type, u32 id);
+int panel_next_on(struct platform_device *pdev);
+int panel_next_off(struct platform_device *pdev);
+
+int lcdc_device_register(struct msm_panel_info *pinfo);
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+					u32 channel, u32 panel);
+
+#endif /* MSM_FB_PANEL_H */
diff --git a/drivers/staging/msm/msm_mdp.h b/drivers/staging/msm/msm_mdp.h
new file mode 100644
index 00000000000..2d5323f5b62
--- /dev/null
+++ b/drivers/staging/msm/msm_mdp.h
@@ -0,0 +1,245 @@
+/* include/linux/msm_mdp.h
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MSM_MDP_H_
+#define _MSM_MDP_H_
+
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#define MSMFB_IOCTL_MAGIC 'm'
+#define MSMFB_GRP_DISP          _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int)
+#define MSMFB_BLIT              _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int)
+#define MSMFB_SUSPEND_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 128, unsigned int)
+#define MSMFB_RESUME_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 129, unsigned int)
+#define MSMFB_CURSOR _IOW(MSMFB_IOCTL_MAGIC, 130, struct fb_cursor)
+#define MSMFB_SET_LUT _IOW(MSMFB_IOCTL_MAGIC, 131, struct fb_cmap)
+#define MSMFB_HISTOGRAM _IOWR(MSMFB_IOCTL_MAGIC, 132, struct mdp_histogram)
+/* new ioctls's for set/get ccs matrix */
+#define MSMFB_GET_CCS_MATRIX  _IOWR(MSMFB_IOCTL_MAGIC, 133, struct mdp_ccs)
+#define MSMFB_SET_CCS_MATRIX  _IOW(MSMFB_IOCTL_MAGIC, 134, struct mdp_ccs)
+#define MSMFB_OVERLAY_SET       _IOWR(MSMFB_IOCTL_MAGIC, 135, \
+						struct mdp_overlay)
+#define MSMFB_OVERLAY_UNSET     _IOW(MSMFB_IOCTL_MAGIC, 136, unsigned int)
+#define MSMFB_OVERLAY_PLAY      _IOW(MSMFB_IOCTL_MAGIC, 137, \
+						struct msmfb_overlay_data)
+#define MSMFB_GET_PAGE_PROTECTION _IOR(MSMFB_IOCTL_MAGIC, 138, \
+					struct mdp_page_protection)
+#define MSMFB_SET_PAGE_PROTECTION _IOW(MSMFB_IOCTL_MAGIC, 139, \
+					struct mdp_page_protection)
+#define MSMFB_OVERLAY_GET      _IOR(MSMFB_IOCTL_MAGIC, 140, \
+						struct mdp_overlay)
+
+/* new ioctls for async MDP ops */
+#define MSMFB_ASYNC_BLIT _IOW(MSMFB_IOCTL_MAGIC, 141, unsigned int)
+#define MSMFB_BLIT_FLUSH _IOR(MSMFB_IOCTL_MAGIC, 142, unsigned int)
+
+#define MDP_IMGTYPE2_START 0x10000
+
+enum {
+	MDP_RGB_565,      /* RGB 565 planer */
+	MDP_XRGB_8888,    /* RGB 888 padded */
+	MDP_Y_CBCR_H2V2,  /* Y and CbCr, pseudo planer w/ Cb is in MSB */
+	MDP_ARGB_8888,    /* ARGB 888 */
+	MDP_RGB_888,      /* RGB 888 planer */
+	MDP_Y_CRCB_H2V2,  /* Y and CrCb, pseudo planer w/ Cr is in MSB */
+	MDP_YCRYCB_H2V1,  /* YCrYCb interleave */
+	MDP_Y_CRCB_H2V1,  /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+	MDP_Y_CBCR_H2V1,   /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+	MDP_RGBA_8888,    /* ARGB 888 */
+	MDP_BGRA_8888,	  /* ABGR 888 */
+	MDP_Y_CRCB_H2V2_TILE,  /* Y and CrCb, pseudo planer tile */
+	MDP_Y_CBCR_H2V2_TILE,  /* Y and CbCr, pseudo planer tile */
+	MDP_IMGTYPE_LIMIT,
+	MDP_BGR_565 = MDP_IMGTYPE2_START,      /* BGR 565 planer */
+	MDP_FB_FORMAT,    /* framebuffer format */
+	MDP_IMGTYPE_LIMIT2 /* Non valid image type after this enum */
+};
+
+enum {
+	PMEM_IMG,
+	FB_IMG,
+};
+
+/* mdp_blit_req flag values */
+#define MDP_ROT_NOP 0
+#define MDP_FLIP_LR 0x1
+#define MDP_FLIP_UD 0x2
+#define MDP_ROT_90 0x4
+#define MDP_ROT_180 (MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_ROT_270 (MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_DITHER 0x8
+#define MDP_BLUR 0x10
+#define MDP_BLEND_FG_PREMULT 0x20000
+
+#define MDP_DEINTERLACE 	0x80000000
+#define MDP_SHARPENING  	0x40000000
+
+#define MDP_NO_DMA_BARRIER_START	0x20000000
+#define MDP_NO_DMA_BARRIER_END		0x10000000
+#define MDP_NO_BLIT			0x08000000
+#define MDP_BLIT_WITH_DMA_BARRIERS	0x000
+#define MDP_BLIT_WITH_NO_DMA_BARRIERS    \
+	(MDP_NO_DMA_BARRIER_START | MDP_NO_DMA_BARRIER_END)
+#define MDP_TRANSP_NOP 0xffffffff
+#define MDP_ALPHA_NOP 0xff
+
+#define MDP_BLIT_SRC_GEM	0x02000000 /* set for GEM, clear for PMEM */
+#define MDP_BLIT_DST_GEM	0x01000000 /* set for GEM, clear for PMEM */
+
+#define MDP_FB_PAGE_PROTECTION_NONCACHED         (0)
+#define MDP_FB_PAGE_PROTECTION_WRITECOMBINE      (1)
+#define MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE (2)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE    (3)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE  (4)
+/* Sentinel: Don't use! */
+#define MDP_FB_PAGE_PROTECTION_INVALID           (5)
+/* Count of the number of MDP_FB_PAGE_PROTECTION_... values. */
+#define MDP_NUM_FB_PAGE_PROTECTION_VALUES        (5)
+
+struct mdp_rect {
+	uint32_t x;
+	uint32_t y;
+	uint32_t w;
+	uint32_t h;
+};
+
+struct mdp_img {
+	uint32_t width;
+	uint32_t height;
+	uint32_t format;
+	uint32_t offset;
+	int memory_id;		/* the file descriptor */
+	uint32_t priv;
+};
+
+/*
+ * {3x3} + {3} ccs matrix
+ */
+
+#define MDP_CCS_RGB2YUV 	0
+#define MDP_CCS_YUV2RGB 	1
+
+#define MDP_CCS_SIZE	9
+#define MDP_BV_SIZE	3
+
+struct mdp_ccs {
+	int direction;			/* MDP_CCS_RGB2YUV or YUV2RGB */
+	uint16_t ccs[MDP_CCS_SIZE];	/* 3x3 color coefficients */
+	uint16_t bv[MDP_BV_SIZE];	/* 1x3 bias vector */
+};
+
+/* The version of the mdp_blit_req structure so that
+ * user applications can selectively decide which functionality
+ * to include
+ */
+
+#define MDP_BLIT_REQ_VERSION 2
+
+struct mdp_blit_req {
+	struct mdp_img src;
+	struct mdp_img dst;
+	struct mdp_rect src_rect;
+	struct mdp_rect dst_rect;
+	uint32_t alpha;
+	uint32_t transp_mask;
+	uint32_t flags;
+	int sharpening_strength;  /* -127 <--> 127, default 64 */
+};
+
+struct mdp_blit_req_list {
+	uint32_t count;
+	struct mdp_blit_req req[];
+};
+
+struct msmfb_data {
+	uint32_t offset;
+	int memory_id;
+	int id;
+};
+
+#define MSMFB_NEW_REQUEST -1
+
+struct msmfb_overlay_data {
+	uint32_t id;
+	struct msmfb_data data;
+};
+
+struct msmfb_img {
+	uint32_t width;
+	uint32_t height;
+	uint32_t format;
+};
+
+struct mdp_overlay {
+	struct msmfb_img src;
+	struct mdp_rect src_rect;
+	struct mdp_rect dst_rect;
+	uint32_t z_order;	/* stage number */
+	uint32_t is_fg;		/* control alpha & transp */
+	uint32_t alpha;
+	uint32_t transp_mask;
+	uint32_t flags;
+	uint32_t id;
+	uint32_t user_data[8];
+};
+
+struct mdp_histogram {
+	uint32_t frame_cnt;
+	uint32_t bin_cnt;
+	uint32_t *r;
+	uint32_t *g;
+	uint32_t *b;
+};
+
+struct mdp_page_protection {
+	uint32_t page_protection;
+};
+
+
+struct msm_panel_common_pdata {
+	int gpio;
+	int (*backlight_level)(int level, int max, int min);
+	int (*pmic_backlight)(int level);
+	int (*panel_num)(void);
+	void (*panel_config_gpio)(int);
+	int *gpio_num;
+};
+
+struct lcdc_platform_data {
+	int (*lcdc_gpio_config)(int on);
+	void (*lcdc_power_save)(int);
+};
+
+struct tvenc_platform_data {
+	int (*pm_vid_en)(int on);
+};
+
+struct mddi_platform_data {
+	void (*mddi_power_save)(int on);
+	int (*mddi_sel_clk)(u32 *clk_rate);
+};
+
+struct msm_fb_platform_data {
+	int (*detect_client)(const char *name);
+	int mddi_prescan;
+	int (*allow_set_offset)(void);
+};
+
+struct msm_hdmi_platform_data {
+	int irq;
+	int (*cable_detect)(int insert);
+};
+
+#endif /*_MSM_MDP_H_*/
diff --git a/drivers/staging/msm/staging-devices.c b/drivers/staging/msm/staging-devices.c
new file mode 100644
index 00000000000..0f8ec3e2601
--- /dev/null
+++ b/drivers/staging/msm/staging-devices.c
@@ -0,0 +1,323 @@
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "msm_mdp.h"
+#include "memory_ll.h"
+//#include "android_pmem.h"
+#include <mach/board.h>
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+
+#define TOUCHPAD_SUSPEND 	34
+#define TOUCHPAD_IRQ 		38
+
+#define MSM_PMEM_MDP_SIZE	0x1591000
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define SMEM_SPINLOCK_I2C	"D:I2C02000021"
+#else
+#define SMEM_SPINLOCK_I2C	"S:6"
+#endif
+
+#define MSM_PMEM_ADSP_SIZE	0x1C00000
+
+#define MSM_FB_SIZE             0x500000
+#define MSM_FB_SIZE_ST15	0x800000
+#define MSM_AUDIO_SIZE		0x80000
+#define MSM_GPU_PHYS_SIZE 	SZ_2M
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE		0xE0000000
+#else
+#define MSM_SMI_BASE		0x00000000
+#endif
+
+#define MSM_SHARED_RAM_PHYS	(MSM_SMI_BASE + 0x00100000)
+
+#define MSM_PMEM_SMI_BASE	(MSM_SMI_BASE + 0x02B00000)
+#define MSM_PMEM_SMI_SIZE	0x01500000
+
+#define MSM_FB_BASE		MSM_PMEM_SMI_BASE
+#define MSM_GPU_PHYS_BASE 	(MSM_FB_BASE + MSM_FB_SIZE)
+#define MSM_PMEM_SMIPOOL_BASE	(MSM_GPU_PHYS_BASE + MSM_GPU_PHYS_SIZE)
+#define MSM_PMEM_SMIPOOL_SIZE	(MSM_PMEM_SMI_SIZE - MSM_FB_SIZE \
+					- MSM_GPU_PHYS_SIZE)
+
+#if defined(CONFIG_FB_MSM_MDP40)
+#define MDP_BASE          0xA3F00000
+#define PMDH_BASE         0xAD600000
+#define EMDH_BASE         0xAD700000
+#define TVENC_BASE        0xAD400000
+#else
+#define MDP_BASE          0xAA200000
+#define PMDH_BASE         0xAA600000
+#define EMDH_BASE         0xAA700000
+#define TVENC_BASE        0xAA400000
+#endif
+
+#define PMEM_KERNEL_EBI1_SIZE	(CONFIG_PMEM_KERNEL_SIZE * 1024 * 1024)
+
+static struct resource msm_fb_resources[] = {
+	{
+		.flags  = IORESOURCE_DMA,
+	}
+};
+
+static struct resource msm_mdp_resources[] = {
+	{
+		.name   = "mdp",
+		.start  = MDP_BASE,
+		.end    = MDP_BASE + 0x000F0000 - 1,
+		.flags  = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device msm_mdp_device = {
+	.name   = "mdp",
+	.id     = 0,
+	.num_resources  = ARRAY_SIZE(msm_mdp_resources),
+	.resource       = msm_mdp_resources,
+};
+
+static struct platform_device msm_lcdc_device = {
+	.name   = "lcdc",
+	.id     = 0,
+};
+
+static int msm_fb_detect_panel(const char *name)
+{
+	int ret = -EPERM;
+
+	if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
+		if (!strncmp(name, "mddi_toshiba_wvga_pt", 20))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if ((machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf())
+			&& !strcmp(name, "lcdc_external"))
+		ret = 0;
+	else if (0 /*machine_is_qsd8x50_grapefruit() */) {
+		if (!strcmp(name, "lcdc_grapefruit_vga"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if (machine_is_qsd8x50_st1()) {
+		if (!strcmp(name, "lcdc_st1_wxga"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if (machine_is_qsd8x50a_st1_5()) {
+		if (!strcmp(name, "lcdc_st15") ||
+		    !strcmp(name, "hdmi_sii9022"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+/* Only allow a small subset of machines to set the offset via
+   FB PAN_DISPLAY */
+
+static int msm_fb_allow_set_offset(void)
+{
+	return (machine_is_qsd8x50_st1() ||
+		machine_is_qsd8x50a_st1_5()) ? 1 : 0;
+}
+
+
+static struct msm_fb_platform_data msm_fb_pdata = {
+	.detect_client = msm_fb_detect_panel,
+	.allow_set_offset = msm_fb_allow_set_offset,
+};
+
+static struct platform_device msm_fb_device = {
+	.name   = "msm_fb",
+	.id     = 0,
+	.num_resources  = ARRAY_SIZE(msm_fb_resources),
+	.resource       = msm_fb_resources,
+	.dev    = {
+		.platform_data = &msm_fb_pdata,
+	}
+};
+
+static void __init qsd8x50_allocate_memory_regions(void)
+{
+	void *addr;
+	unsigned long size;
+	if (machine_is_qsd8x50a_st1_5())
+		size = MSM_FB_SIZE_ST15;
+	else
+		size = MSM_FB_SIZE;
+
+	addr = alloc_bootmem(size); // (void *)MSM_FB_BASE;
+	if (!addr)
+		printk("Failed to allocate bootmem for framebuffer\n");
+
+
+	msm_fb_resources[0].start = __pa(addr);
+	msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
+	pr_info(KERN_ERR "using %lu bytes of SMI at %lx physical for fb\n",
+		size, (unsigned long)addr);
+}
+
+static int msm_fb_lcdc_gpio_config(int on)
+{
+//	return 0;
+	if (machine_is_qsd8x50_st1()) {
+		if (on) {
+			gpio_set_value(32, 1);
+			mdelay(100);
+			gpio_set_value(20, 1);
+			gpio_set_value(17, 1);
+			gpio_set_value(19, 1);
+		} else {
+			gpio_set_value(17, 0);
+			gpio_set_value(19, 0);
+			gpio_set_value(20, 0);
+			mdelay(100);
+			gpio_set_value(32, 0);
+		}
+	} else if (machine_is_qsd8x50a_st1_5()) {
+		if (on) {
+			gpio_set_value(17, 1);
+			gpio_set_value(19, 1);
+			gpio_set_value(20, 1);
+			gpio_set_value(22, 0);
+			gpio_set_value(32, 1);
+			gpio_set_value(155, 1);
+			//st15_hdmi_power(1);
+			gpio_set_value(22, 1);
+
+		} else {
+			gpio_set_value(17, 0);
+			gpio_set_value(19, 0);
+			gpio_set_value(22, 0);
+			gpio_set_value(32, 0);
+			gpio_set_value(155, 0);
+		//	st15_hdmi_power(0);
+		}
+	}
+	return 0;
+}
+
+
+static struct lcdc_platform_data lcdc_pdata = {
+	.lcdc_gpio_config = msm_fb_lcdc_gpio_config,
+};
+
+static struct msm_gpio msm_fb_st15_gpio_config_data[] = {
+	{ GPIO_CFG(17, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en0" },
+	{ GPIO_CFG(19, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "dat_pwr_sv" },
+	{ GPIO_CFG(20, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lvds_pwr_dn" },
+	{ GPIO_CFG(22, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en1" },
+	{ GPIO_CFG(32, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en2" },
+	{ GPIO_CFG(103, 0, GPIO_INPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_irq" },
+	{ GPIO_CFG(155, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_3v3" },
+};
+
+static struct msm_panel_common_pdata mdp_pdata = {
+	.gpio = 98,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_fb_device,
+};
+
+
+static void __init msm_register_device(struct platform_device *pdev, void *data)
+{
+	int ret;
+
+	pdev->dev.platform_data = data;
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		dev_err(&pdev->dev,
+			  "%s: platform_device_register() failed = %d\n",
+			  __func__, ret);
+}
+
+void __init msm_fb_register_device(char *name, void *data)
+{
+	if (!strncmp(name, "mdp", 3))
+		msm_register_device(&msm_mdp_device, data);
+/*
+	else if (!strncmp(name, "pmdh", 4))
+		msm_register_device(&msm_mddi_device, data);
+	else if (!strncmp(name, "emdh", 4))
+		msm_register_device(&msm_mddi_ext_device, data);
+	else if (!strncmp(name, "ebi2", 4))
+		msm_register_device(&msm_ebi2_lcd_device, data);
+	else if (!strncmp(name, "tvenc", 5))
+		msm_register_device(&msm_tvenc_device, data);
+	else */
+
+	if (!strncmp(name, "lcdc", 4))
+		msm_register_device(&msm_lcdc_device, data);
+	/*else
+		printk(KERN_ERR "%s: unknown device! %s\n", __func__, name);
+*/
+}
+
+static void __init msm_fb_add_devices(void)
+{
+	int rc;
+	msm_fb_register_device("mdp", &mdp_pdata);
+//	msm_fb_register_device("pmdh", &mddi_pdata);
+//	msm_fb_register_device("emdh", &mddi_pdata);
+//	msm_fb_register_device("tvenc", 0);
+
+	if (machine_is_qsd8x50a_st1_5()) {
+/*		rc = st15_hdmi_vreg_init();
+		if (rc)
+			return;
+*/
+		rc = msm_gpios_request_enable(
+			msm_fb_st15_gpio_config_data,
+			ARRAY_SIZE(msm_fb_st15_gpio_config_data));
+		if (rc) {
+			printk(KERN_ERR "%s: unable to init lcdc gpios\n",
+			       __func__);
+			return;
+		}
+		msm_fb_register_device("lcdc", &lcdc_pdata);
+	} else
+		msm_fb_register_device("lcdc", 0);
+}
+
+int __init staging_init_pmem(void)
+{
+	qsd8x50_allocate_memory_regions();
+	return 0;
+}
+
+int __init staging_init_devices(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	msm_fb_add_devices();
+	return 0;
+}
+
+arch_initcall(staging_init_pmem);
+arch_initcall(staging_init_devices);
diff --git a/drivers/staging/msm/tv_ntsc.c b/drivers/staging/msm/tv_ntsc.c
new file mode 100644
index 00000000000..5eb67611661
--- /dev/null
+++ b/drivers/staging/msm/tv_ntsc.c
@@ -0,0 +1,163 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#define NTSC_TV_DIMENSION_WIDTH      720
+#define NTSC_TV_DIMENSION_HEIGHT     480
+
+static int ntsc_off(struct platform_device *pdev);
+static int ntsc_on(struct platform_device *pdev);
+
+static int ntsc_on(struct platform_device *pdev)
+{
+	uint32 reg = 0;
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+	if (mfd->panel.id == NTSC_M) {
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081B697);
+	} else {
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x008bc4a3);
+		reg |= TVENC_CTL_NTSCJ_MODE;
+	}
+
+	TV_OUT(TV_CGMS, 0x0);
+	/*  NTSC Timing */
+	TV_OUT(TV_SYNC_1, 0x0020009e);
+	TV_OUT(TV_SYNC_2, 0x011306B4);
+	TV_OUT(TV_SYNC_3, 0x0006000C);
+	TV_OUT(TV_SYNC_4, 0x0028020D);
+	TV_OUT(TV_SYNC_5, 0x005E02FB);
+	TV_OUT(TV_SYNC_6, 0x0006000C);
+	TV_OUT(TV_SYNC_7, 0x00000012);
+	TV_OUT(TV_BURST_V1, 0x0013020D);
+	TV_OUT(TV_BURST_V2, 0x0014020C);
+	TV_OUT(TV_BURST_V3, 0x0013020D);
+	TV_OUT(TV_BURST_V4, 0x0014020C);
+	TV_OUT(TV_BURST_H, 0x00AE00F2);
+	TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+	TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+	reg |= TVENC_CTL_TV_MODE_NTSC_M_PAL60;
+
+	reg |= TVENC_CTL_Y_FILTER_EN |
+	    TVENC_CTL_CR_FILTER_EN |
+	    TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+	reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+	TV_OUT(TV_LEVEL, 0x00000000);	/* DC offset to 0. */
+	TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+	TV_OUT(TV_ENC_CTL, reg);
+
+	reg |= TVENC_CTL_ENC_EN;
+	TV_OUT(TV_ENC_CTL, reg);
+
+	return ret;
+}
+
+static int ntsc_off(struct platform_device *pdev)
+{
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+	return 0;
+}
+
+static int __init ntsc_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = ntsc_probe,
+	.driver = {
+		.name   = "tv_ntsc",
+	},
+};
+
+static struct msm_fb_panel_data ntsc_panel_data = {
+	.panel_info.xres = NTSC_TV_DIMENSION_WIDTH,
+	.panel_info.yres = NTSC_TV_DIMENSION_HEIGHT,
+	.panel_info.type = TV_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 16,
+	.panel_info.fb_num = 2,
+	.on = ntsc_on,
+	.off = ntsc_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "tv_ntsc",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &ntsc_panel_data,
+	}
+};
+
+static int __init ntsc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(ntsc_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/tv_pal.c b/drivers/staging/msm/tv_pal.c
new file mode 100644
index 00000000000..204da514660
--- /dev/null
+++ b/drivers/staging/msm/tv_pal.c
@@ -0,0 +1,213 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#ifdef CONFIG_FB_MSM_TVOUT_PAL_M
+#define PAL_TV_DIMENSION_WIDTH      720
+#define PAL_TV_DIMENSION_HEIGHT     480
+#else
+#define PAL_TV_DIMENSION_WIDTH      720
+#define PAL_TV_DIMENSION_HEIGHT     576
+#endif
+
+static int pal_on(struct platform_device *pdev)
+{
+	uint32 reg = 0;
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+	switch (mfd->panel.id) {
+	case PAL_BDGHIN:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0088c1a0);
+		TV_OUT(TV_CGMS, 0x00012345);
+		TV_OUT(TV_TEST_MUX, 0x0);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x00180097);
+		TV_OUT(TV_SYNC_2, 0x011f06c0);
+		TV_OUT(TV_SYNC_3, 0x0005000a);
+		TV_OUT(TV_SYNC_4, 0x00320271);
+		TV_OUT(TV_SYNC_5, 0x005602f9);
+		TV_OUT(TV_SYNC_6, 0x0005000a);
+		TV_OUT(TV_SYNC_7, 0x0000000f);
+		TV_OUT(TV_BURST_V1, 0x0012026e);
+		TV_OUT(TV_BURST_V2, 0x0011026d);
+		TV_OUT(TV_BURST_V3, 0x00100270);
+		TV_OUT(TV_BURST_V4, 0x0013026f);
+		TV_OUT(TV_BURST_H, 0x00af00ea);
+		TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_BDGHIN;
+		break;
+	case PAL_M:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081b697);
+		TV_OUT(TV_CGMS, 0x000af317);
+		TV_OUT(TV_TEST_MUX, 0x000001c3);
+		TV_OUT(TV_TEST_MODE, 0x00000002);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x0020009e);
+		TV_OUT(TV_SYNC_2, 0x011306b4);
+		TV_OUT(TV_SYNC_3, 0x0006000c);
+		TV_OUT(TV_SYNC_4, 0x0028020D);
+		TV_OUT(TV_SYNC_5, 0x005e02fb);
+		TV_OUT(TV_SYNC_6, 0x0006000c);
+		TV_OUT(TV_SYNC_7, 0x00000012);
+		TV_OUT(TV_BURST_V1, 0x0012020b);
+		TV_OUT(TV_BURST_V2, 0x0016020c);
+		TV_OUT(TV_BURST_V3, 0x00150209);
+		TV_OUT(TV_BURST_V4, 0x0013020c);
+		TV_OUT(TV_BURST_H, 0x00bf010b);
+		TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_M;
+		break;
+	case PAL_N:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081b697);
+		TV_OUT(TV_CGMS, 0x000af317);
+		TV_OUT(TV_TEST_MUX, 0x000001c3);
+		TV_OUT(TV_TEST_MODE, 0x00000002);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x00180097);
+		TV_OUT(TV_SYNC_2, 0x12006c0);
+		TV_OUT(TV_SYNC_3, 0x0005000a);
+		TV_OUT(TV_SYNC_4, 0x00320271);
+		TV_OUT(TV_SYNC_5, 0x005602f9);
+		TV_OUT(TV_SYNC_6, 0x0005000a);
+		TV_OUT(TV_SYNC_7, 0x0000000f);
+		TV_OUT(TV_BURST_V1, 0x0012026e);
+		TV_OUT(TV_BURST_V2, 0x0011026d);
+		TV_OUT(TV_BURST_V3, 0x00100270);
+		TV_OUT(TV_BURST_V4, 0x0013026f);
+		TV_OUT(TV_BURST_H, 0x00af00fa);
+		TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_N;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	reg |= TVENC_CTL_Y_FILTER_EN |
+	    TVENC_CTL_CR_FILTER_EN |
+	    TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+	reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+	TV_OUT(TV_LEVEL, 0x00000000);	/* DC offset to 0. */
+	TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+	TV_OUT(TV_ENC_CTL, reg);
+
+	reg |= TVENC_CTL_ENC_EN;
+	TV_OUT(TV_ENC_CTL, reg);
+
+	return ret;
+}
+
+static int pal_off(struct platform_device *pdev)
+{
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+	return 0;
+}
+
+static int __init pal_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = pal_probe,
+	.driver = {
+		.name   = "tv_pal",
+	},
+};
+
+static struct msm_fb_panel_data pal_panel_data = {
+	.panel_info.xres = PAL_TV_DIMENSION_WIDTH,
+	.panel_info.yres = PAL_TV_DIMENSION_HEIGHT,
+	.panel_info.type = TV_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 16,
+	.panel_info.fb_num = 2,
+	.on = pal_on,
+	.off = pal_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "tv_pal",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &pal_panel_data,
+	}
+};
+
+static int __init pal_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(pal_init);
diff --git a/drivers/staging/msm/tvenc.c b/drivers/staging/msm/tvenc.c
new file mode 100644
index 00000000000..f41c5ac22f2
--- /dev/null
+++ b/drivers/staging/msm/tvenc.c
@@ -0,0 +1,295 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#define TVENC_C
+#include "tvenc.h"
+#include "msm_fb.h"
+
+static int tvenc_probe(struct platform_device *pdev);
+static int tvenc_remove(struct platform_device *pdev);
+
+static int tvenc_off(struct platform_device *pdev);
+static int tvenc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *tvenc_clk;
+static struct clk *tvdac_clk;
+
+static struct platform_driver tvenc_driver = {
+	.probe = tvenc_probe,
+	.remove = tvenc_remove,
+	.suspend = NULL,
+//	.suspend_late = NULL,
+//	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "tvenc",
+		   },
+};
+
+static struct tvenc_platform_data *tvenc_pdata;
+
+static int tvenc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	clk_disable(tvenc_clk);
+	clk_disable(tvdac_clk);
+
+	if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+		ret = tvenc_pdata->pm_vid_en(0);
+
+	//pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+	//				PM_QOS_DEFAULT_VALUE);
+
+	if (ret)
+		printk(KERN_ERR "%s: pm_vid_en(off) failed! %d\n",
+		__func__, ret);
+
+	return ret;
+}
+
+static int tvenc_on(struct platform_device *pdev)
+{
+	int ret = 0;
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+//				128000);
+	if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+		ret = tvenc_pdata->pm_vid_en(1);
+
+	if (ret) {
+		printk(KERN_ERR "%s: pm_vid_en(on) failed! %d\n",
+		__func__, ret);
+		return ret;
+	}
+
+	clk_enable(tvenc_clk);
+	clk_enable(tvdac_clk);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+void tvenc_gen_test_pattern(struct msm_fb_data_type *mfd)
+{
+	uint32 reg = 0, i;
+
+	reg = readl(MSM_TV_ENC_CTL);
+	reg |= TVENC_CTL_TEST_PATT_EN;
+
+	for (i = 0; i < 3; i++) {
+		TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+		switch (i) {
+			/*
+			 * TV Encoder - Color Bar Test Pattern
+			 */
+		case 0:
+			reg |= TVENC_CTL_TPG_CLRBAR;
+			break;
+			/*
+			 * TV Encoder - Red Frame Test Pattern
+			 */
+		case 1:
+			reg |= TVENC_CTL_TPG_REDCLR;
+			break;
+			/*
+			 * TV Encoder - Modulated Ramp Test Pattern
+			 */
+		default:
+			reg |= TVENC_CTL_TPG_MODRAMP;
+			break;
+		}
+
+		TV_OUT(TV_ENC_CTL, reg);
+		mdelay(5000);
+
+		switch (i) {
+			/*
+			 * TV Encoder - Color Bar Test Pattern
+			 */
+		case 0:
+			reg &= ~TVENC_CTL_TPG_CLRBAR;
+			break;
+			/*
+			 * TV Encoder - Red Frame Test Pattern
+			 */
+		case 1:
+			reg &= ~TVENC_CTL_TPG_REDCLR;
+			break;
+			/*
+			 * TV Encoder - Modulated Ramp Test Pattern
+			 */
+		default:
+			reg &= ~TVENC_CTL_TPG_MODRAMP;
+			break;
+		}
+	}
+}
+
+static int tvenc_resource_initialized;
+
+static int tvenc_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+
+	if (pdev->id == 0) {
+		tvenc_base = ioremap(pdev->resource[0].start,
+					pdev->resource[0].end -
+					pdev->resource[0].start + 1);
+		if (!tvenc_base) {
+			printk(KERN_ERR
+				"tvenc_base ioremap failed!\n");
+			return -ENOMEM;
+		}
+		tvenc_pdata = pdev->dev.platform_data;
+		tvenc_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!tvenc_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	if (tvenc_base == NULL)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_TV;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "tvenc_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = tvenc_on;
+	pdata->off = tvenc_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_YCRYCB_H2V1;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto tvenc_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+tvenc_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int tvenc_remove(struct platform_device *pdev)
+{
+//	pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc");
+	return 0;
+}
+
+static int tvenc_register_driver(void)
+{
+	return platform_driver_register(&tvenc_driver);
+}
+
+static int __init tvenc_driver_init(void)
+{
+	tvenc_clk = clk_get(NULL, "tv_enc_clk");
+	tvdac_clk = clk_get(NULL, "tv_dac_clk");
+
+	if (IS_ERR(tvenc_clk)) {
+		printk(KERN_ERR "error: can't get tvenc_clk!\n");
+		return IS_ERR(tvenc_clk);
+	}
+
+	if (IS_ERR(tvdac_clk)) {
+		printk(KERN_ERR "error: can't get tvdac_clk!\n");
+		return IS_ERR(tvdac_clk);
+	}
+
+//	pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+//				PM_QOS_DEFAULT_VALUE);
+	return tvenc_register_driver();
+}
+
+module_init(tvenc_driver_init);
diff --git a/drivers/staging/msm/tvenc.h b/drivers/staging/msm/tvenc.h
new file mode 100644
index 00000000000..a682dbebcf7
--- /dev/null
+++ b/drivers/staging/msm/tvenc.h
@@ -0,0 +1,117 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TVENC_H
+#define TVENC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#define NTSC_M		0 /* North America, Korea */
+#define NTSC_J		1 /* Japan */
+#define PAL_BDGHIN	2 /* Non-argentina PAL-N */
+#define PAL_M		3 /* PAL-M */
+#define PAL_N		4 /* Argentina PAL-N */
+
+/* 3.57954545 Mhz */
+#define TVENC_CTL_TV_MODE_NTSC_M_PAL60  0
+/* 3.57961149 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_M             BIT(0)
+/*non-Argintina = 4.3361875 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_BDGHIN        BIT(1)
+/*Argentina = 3.582055625 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_N             (BIT(1)|BIT(0))
+
+#define TVENC_CTL_ENC_EN                    BIT(2)
+#define TVENC_CTL_CC_EN                     BIT(3)
+#define TVENC_CTL_CGMS_EN                   BIT(4)
+#define TVENC_CTL_MACRO_EN                  BIT(5)
+#define TVENC_CTL_Y_FILTER_W_NOTCH          BIT(6)
+#define TVENC_CTL_Y_FILTER_WO_NOTCH         0
+#define TVENC_CTL_Y_FILTER_EN               BIT(7)
+#define TVENC_CTL_CR_FILTER_EN              BIT(8)
+#define TVENC_CTL_CB_FILTER_EN              BIT(9)
+#define TVENC_CTL_SINX_FILTER_EN            BIT(10)
+#define TVENC_CTL_TEST_PATT_EN              BIT(11)
+#define TVENC_CTL_OUTPUT_INV                BIT(12)
+#define TVENC_CTL_PAL60_MODE                BIT(13)
+#define TVENC_CTL_NTSCJ_MODE                BIT(14)
+#define TVENC_CTL_TPG_CLRBAR                0
+#define TVENC_CTL_TPG_MODRAMP               BIT(15)
+#define TVENC_CTL_TPG_REDCLR                BIT(16)
+#define TVENC_CTL_S_VIDEO_EN                BIT(19)
+
+#ifdef TVENC_C
+void *tvenc_base;
+#else
+extern void *tvenc_base;
+#endif
+
+#define TV_OUT(reg, v)  writel(v, tvenc_base + MSM_##reg)
+
+#define MSM_TV_ENC_CTL			0x00
+#define MSM_TV_LEVEL			0x04
+#define MSM_TV_GAIN			0x08
+#define MSM_TV_OFFSET			0x0c
+#define MSM_TV_CGMS			0x10
+#define MSM_TV_SYNC_1			0x14
+#define MSM_TV_SYNC_2			0x18
+#define MSM_TV_SYNC_3			0x1c
+#define MSM_TV_SYNC_4			0x20
+#define MSM_TV_SYNC_5			0x24
+#define MSM_TV_SYNC_6			0x28
+#define MSM_TV_SYNC_7			0x2c
+#define MSM_TV_BURST_V1			0x30
+#define MSM_TV_BURST_V2			0x34
+#define MSM_TV_BURST_V3			0x38
+#define MSM_TV_BURST_V4			0x3c
+#define MSM_TV_BURST_H			0x40
+#define MSM_TV_SOL_REQ_ODD		0x44
+#define MSM_TV_SOL_REQ_EVEN		0x48
+#define MSM_TV_DAC_CTL			0x4c
+#define MSM_TV_TEST_MUX			0x50
+#define MSM_TV_TEST_MODE		0x54
+#define MSM_TV_TEST_MISR_RESET		0x58
+#define MSM_TV_TEST_EXPORT_MISR		0x5c
+#define MSM_TV_TEST_MISR_CURR_VAL	0x60
+#define MSM_TV_TEST_SOF_CFG		0x64
+#define MSM_TV_DAC_INTF			0x100
+
+#endif /* TVENC_H */
diff --git a/drivers/staging/phison/Kconfig b/drivers/staging/phison/Kconfig
index d3c65d315a2..1b56119a765 100644
--- a/drivers/staging/phison/Kconfig
+++ b/drivers/staging/phison/Kconfig
@@ -1,5 +1,5 @@
 config IDE_PHISON
 	tristate "PCIE ATA PS5000 IDE support"
-	depends on PCI && ATA && ATA_SFF
+	depends on PCI && ATA && ATA_SFF && ATA_BMDMA
 	---help---
 	  This is an experimental driver for PS5000 IDE driver.
diff --git a/drivers/staging/rar_register/Kconfig b/drivers/staging/rar_register/Kconfig
deleted file mode 100644
index e9c27738199..00000000000
--- a/drivers/staging/rar_register/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# RAR device configuration
-#
-
-menu "RAR Register Driver"
-#
-#	Restricted Access Register Manager
-#
-config RAR_REGISTER
-	tristate "Restricted Access Region Register Driver"
-	depends on PCI
-	default n
-	---help---
-	  This driver allows other kernel drivers access to the
-	  contents of the restricted access region control registers.
-
-	  The restricted access region control registers
-	  (rar_registers) are used to pass address and
-	  locking information on restricted access regions
-	  to other drivers that use restricted access regions.
-
-	  The restricted access regions are regions of memory
-	  on the Intel MID Platform that are not accessible to
-	  the x86 processor, but are accessible to dedicated
-	  processors on board peripheral devices.
-
-	  The purpose of the restricted access regions is to
-	  protect sensitive data from compromise by unauthorized
-	  programs running on the x86 processor.
-endmenu
diff --git a/drivers/staging/rar_register/Makefile b/drivers/staging/rar_register/Makefile
deleted file mode 100644
index d5954ccc16c..00000000000
--- a/drivers/staging/rar_register/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-EXTRA_CFLAGS += -DLITTLE__ENDIAN
-obj-$(CONFIG_RAR_REGISTER) += rar_register.o
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 112da7a6c41..6b8268d3dc7 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2522,6 +2522,8 @@ int rt28xx_sta_ioctl(IN struct net_device *net_dev,
 			Status =
 			    copy_to_user(erq->pointer, pAd->nickname,
 					 erq->length);
+			if (Status)
+				Status = -EFAULT;
 			break;
 		}
 	case SIOCGIWRATE:	/*get default bit rate (bps) */
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index b740662d095..674769d2b59 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -77,6 +77,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x083A, 0x7522)},	/* Arcadyan */
 	{USB_DEVICE(0x0CDE, 0x0022)},	/* ZCOM */
 	{USB_DEVICE(0x0586, 0x3416)},	/* Zyxel */
+	{USB_DEVICE(0x0586, 0x341a)},	/* Zyxel NWD-270N */
 	{USB_DEVICE(0x0CDE, 0x0025)},	/* Zyxel */
 	{USB_DEVICE(0x1740, 0x9701)},	/* EnGenius */
 	{USB_DEVICE(0x1740, 0x9702)},	/* EnGenius */
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index dacefea7811..49ab9fa9ffa 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -66,8 +66,6 @@ static int hwseqnum = 0;
 static int hwwep = 0;
 static int channels = 0x3fff;
 
-#define eqMacAddr(a, b)		(((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#define cpMacAddr(des, src)		((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 447d6474a70..1b6890611fb 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -112,28 +112,29 @@ u32 rt_global_debug_component = \
 #define CAM_CONTENT_COUNT 8
 
 static const struct usb_device_id rtl8192_usb_id_tbl[] = {
-	/* Realtek */
-	{USB_DEVICE(0x0bda, 0x8171)},
-	{USB_DEVICE(0x0bda, 0x8192)},
-	{USB_DEVICE(0x0bda, 0x8709)},
-	/* Corega */
-	{USB_DEVICE(0x07aa, 0x0043)},
-	/* Belkin */
-	{USB_DEVICE(0x050d, 0x805E)},
-	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
-	/* Sitecom */
-	{USB_DEVICE(0x0df6, 0x0031)},
-	{USB_DEVICE(0x0df6, 0x004b)},	/* WL-349 */
-	/* EnGenius */
-	{USB_DEVICE(0x1740, 0x9201)},
-	/* Dlink */
-	{USB_DEVICE(0x2001, 0x3301)},
-	/* Zinwell */
-	{USB_DEVICE(0x5a57, 0x0290)},
-	/* Guillemot */
-	{USB_DEVICE(0x06f8, 0xe031)},
-	//92SU
+	{USB_DEVICE(0x0bda, 0x8171)}, /* Realtek */
 	{USB_DEVICE(0x0bda, 0x8172)},
+	{USB_DEVICE(0x0bda, 0x8173)},
+	{USB_DEVICE(0x0bda, 0x8174)},
+	{USB_DEVICE(0x0bda, 0x8712)},
+	{USB_DEVICE(0x0bda, 0x8713)},
+	{USB_DEVICE(0x07aa, 0x0047)},
+	{USB_DEVICE(0x07d1, 0x3303)},
+	{USB_DEVICE(0x07d1, 0x3302)},
+	{USB_DEVICE(0x07d1, 0x3300)},
+	{USB_DEVICE(0x1740, 0x9603)},
+	{USB_DEVICE(0x1740, 0x9605)},
+	{USB_DEVICE(0x050d, 0x815F)},
+	{USB_DEVICE(0x06f8, 0xe031)},
+	{USB_DEVICE(0x7392, 0x7611)},
+	{USB_DEVICE(0x7392, 0x7612)},
+	{USB_DEVICE(0x7392, 0x7622)},
+	{USB_DEVICE(0x0DF6, 0x0045)},
+	{USB_DEVICE(0x0E66, 0x0015)},
+	{USB_DEVICE(0x0E66, 0x0016)},
+	{USB_DEVICE(0x0b05, 0x1786)},
+	/* these are not in the official list */
+	{USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
 	{}
 };
 
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2bede271a2f..f38472c2e75 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -121,6 +121,8 @@ static const struct usb_device_id rtl8192_usb_id_tbl[] = {
 	{USB_DEVICE(0x2001, 0x3301)},
 	/* Zinwell */
 	{USB_DEVICE(0x5a57, 0x0290)},
+	/* LG */
+	{USB_DEVICE(0x043e, 0x7a01)},
 	{}
 };
 
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 0332c370fd8..ecbde3467b1 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -594,8 +594,10 @@ static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
 	dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* allocate memory */
 	if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
@@ -609,8 +611,10 @@ static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
 
 	/* write the memory back to the user space */
 	error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* set the allocation */
 	sep->data_pool_bytes_allocated += command_args.num_bytes;
@@ -661,6 +665,8 @@ static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned lon
 	}
 	/* copy the application data */
 	error = copy_from_user(virt_address, (void *) app_in_address, num_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n");
 	return error;
@@ -711,6 +717,8 @@ static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long
 
 	/* copy the application data */
 	error = copy_to_user((void *) app_out_address, virt_address, num_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n");
 	return error;
@@ -1448,8 +1456,10 @@ static int sep_create_sync_dma_tables_handler(struct sep_device *sep,
 	dbg("SEP Driver:--------> sep_create_sync_dma_tables_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_sync_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	edbg("app_in_address is %08lx\n", command_args.app_in_address);
 	edbg("app_out_address is %08lx\n", command_args.app_out_address);
@@ -1799,8 +1809,10 @@ static int sep_create_flow_dma_tables_handler(struct sep_device *sep,
 		goto end_function;
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* create flow tables */
 	error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
@@ -1819,8 +1831,10 @@ static int sep_create_flow_dma_tables_handler(struct sep_device *sep,
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_build_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function_with_error;
+	}
 
 	/* all the flow created  - update the flow entry with temp id */
 	flow_context_ptr->flow_id = SEP_TEMP_FLOW_ID;
@@ -1861,8 +1875,10 @@ static int sep_add_flow_tables_handler(struct sep_device *sep, unsigned long arg
 
 	/* get input parameters */
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* find the flow structure for the flow id */
 	flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id);
@@ -1933,6 +1949,8 @@ static int sep_add_flow_tables_handler(struct sep_device *sep, unsigned long arg
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_add_flow_table_t));
+	if (error)
+		error = -EFAULT;
 end_function_with_error:
 	/* free the allocated tables */
 	sep_deallocated_flow_tables(&first_table_data);
@@ -1953,8 +1971,10 @@ static int sep_add_flow_tables_message_handler(struct sep_device *sep, unsigned
 	dbg("SEP Driver:--------> sep_add_flow_tables_message_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_message_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* check input */
 	if (command_args.message_size_in_bytes > SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES) {
@@ -1970,6 +1990,8 @@ static int sep_add_flow_tables_message_handler(struct sep_device *sep, unsigned
 	/* copy the message into context */
 	flow_context_ptr->message_size_in_bytes = command_args.message_size_in_bytes;
 	error = copy_from_user(flow_context_ptr->message, (void *) command_args.message_address, command_args.message_size_in_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_add_flow_tables_message_handler end\n");
 	return error;
@@ -1994,6 +2016,8 @@ static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned lon
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_static_pool_addr_t));
+	if (error)
+		error = -EFAULT;
 	dbg("SEP Driver:<-------- sep_get_static_pool_addr_handler end\n");
 	return error;
 }
@@ -2010,8 +2034,10 @@ static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsign
 	dbg("SEP Driver:--------> sep_get_physical_mapped_offset_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_get_mapped_offset_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	if (command_args.physical_address < sep->shared_bus) {
 		error = -EINVAL;
@@ -2025,6 +2051,8 @@ static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsign
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_get_mapped_offset_t));
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_get_physical_mapped_offset_handler end\n");
 	return error;
@@ -2070,11 +2098,11 @@ static int sep_init_handler(struct sep_device *sep, unsigned long arg)
 	error = 0;
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_init_t));
-
-	dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user \n");
-
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
+	dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user\n");
 
 	/* PATCH - configure the DMA to single -burst instead of multi-burst */
 	/*sep_configure_dma_burst(); */
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index 5fe759cc2ee..c725356cc34 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -2,7 +2,8 @@ config VIDEO_TM6000
 	tristate "TV Master TM5600/6000/6010 driver"
 	depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
 	select VIDEO_TUNER
-	select TUNER_XC2028
+	select MEDIA_TUNER_XC2028
+	select MEDIA_TUNER_XC5000
 	select VIDEOBUF_VMALLOC
 	help
 	  Support for TM5600/TM6000/TM6010 USB Device
@@ -25,8 +26,8 @@ config VIDEO_TM6000_ALSA
 	  module will be called tm6000-alsa.
 
 config VIDEO_TM6000_DVB
-	bool "DVB Support for tm6000 based TV cards"
-	depends on VIDEO_TM6000 && DVB_CORE && EXPERIMENTAL
+	tristate "DVB Support for tm6000 based TV cards"
+	depends on VIDEO_TM6000 && DVB_CORE && USB && EXPERIMENTAL
 	select DVB_ZL10353
 	---help---
 	  This adds support for DVB cards based on the tm5600/tm6000 chip.
diff --git a/drivers/staging/tm6000/Makefile b/drivers/staging/tm6000/Makefile
index 93370fccc07..77e06bfd2c4 100644
--- a/drivers/staging/tm6000/Makefile
+++ b/drivers/staging/tm6000/Makefile
@@ -2,14 +2,12 @@ tm6000-objs := tm6000-cards.o \
 		   tm6000-core.o  \
 		   tm6000-i2c.o   \
 		   tm6000-video.o \
-		   tm6000-stds.o
-
-ifeq ($(CONFIG_VIDEO_TM6000_DVB),y)
-tm6000-objs += tm6000-dvb.o
-endif
+		   tm6000-stds.o \
+		   tm6000-input.o
 
 obj-$(CONFIG_VIDEO_TM6000) += tm6000.o
 obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o
+obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o
 
 EXTRA_CFLAGS = -Idrivers/media/video
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index bc89f9d2800..087137d9164 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
 
 #include <asm/delay.h>
 #include <sound/core.h>
@@ -35,34 +37,11 @@
 	} while (0)
 
 /****************************************************************************
-	Data type declarations - Can be moded to a header file later
- ****************************************************************************/
-
-struct snd_tm6000_card {
-	struct snd_card            *card;
-
-	spinlock_t                 reg_lock;
-
-	atomic_t		   count;
-
-	unsigned int               period_size;
-	unsigned int               num_periods;
-
-	struct tm6000_core         *core;
-	struct tm6000_buffer       *buf;
-
-	int			   bufsize;
-
-	struct snd_pcm_substream *substream;
-};
-
-
-/****************************************************************************
 			Module global static vars
  ****************************************************************************/
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
-static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;       /* ID for this card */
+
 static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
 
 module_param_array(enable, bool, NULL, 0444);
@@ -99,11 +78,15 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 	struct tm6000_core *core = chip->core;
 	int val;
 
+	dprintk(1, "Starting audio DMA\n");
+
 	/* Enables audio */
 	val = tm6000_get_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x0);
 	val |= 0x20;
 	tm6000_set_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
 
+	tm6000_set_audio_bitrate(core, 48000);
+
 	tm6000_set_reg(core, TM6010_REQ08_R01_A_INIT, 0x80);
 
 	return 0;
@@ -128,19 +111,39 @@ static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
 	return 0;
 }
 
-static int dsp_buffer_free(struct snd_tm6000_card *chip)
+static void dsp_buffer_free(struct snd_pcm_substream *substream)
 {
-	BUG_ON(!chip->bufsize);
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
 
 	dprintk(2, "Freeing buffer\n");
 
-	/* FIXME: Frees buffer */
+	vfree(substream->runtime->dma_area);
+	substream->runtime->dma_area = NULL;
+	substream->runtime->dma_bytes = 0;
+}
+
+static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
 
-	chip->bufsize = 0;
+	dprintk(2, "Allocating buffer\n");
 
-       return 0;
+	if (substream->runtime->dma_area) {
+		if (substream->runtime->dma_bytes > size)
+			return 0;
+		dsp_buffer_free(substream);
+	}
+
+	substream->runtime->dma_area = vmalloc(size);
+	if (!substream->runtime->dma_area)
+		return -ENOMEM;
+
+	substream->runtime->dma_bytes = size;
+
+	return 0;
 }
 
+
 /****************************************************************************
 				ALSA PCM Interface
  ****************************************************************************/
@@ -157,16 +160,16 @@ static struct snd_pcm_hardware snd_tm6000_digital_hw = {
 		SNDRV_PCM_INFO_MMAP_VALID,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 
-	.rates =		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
-	.rate_min =		44100,
+	.rates =		SNDRV_PCM_RATE_48000,
+	.rate_min =		48000,
 	.rate_max =		48000,
 	.channels_min = 2,
 	.channels_max = 2,
-	.period_bytes_min = DEFAULT_FIFO_SIZE/4,
-	.period_bytes_max = DEFAULT_FIFO_SIZE/4,
+	.period_bytes_min = 62720,
+	.period_bytes_max = 62720,
 	.periods_min = 1,
 	.periods_max = 1024,
-	.buffer_bytes_max = (1024*1024),
+	.buffer_bytes_max = 62720 * 8,
 };
 
 /*
@@ -201,29 +204,64 @@ static int snd_tm6000_close(struct snd_pcm_substream *substream)
 	return 0;
 }
 
+static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
+{
+	struct snd_tm6000_card *chip = core->adev;
+	struct snd_pcm_substream *substream = chip->substream;
+	struct snd_pcm_runtime *runtime;
+	int period_elapsed = 0;
+	unsigned int stride, buf_pos;
+
+	if (!size || !substream)
+		return -EINVAL;
+
+	runtime = substream->runtime;
+	if (!runtime || !runtime->dma_area)
+		return -EINVAL;
+
+	buf_pos = chip->buf_pos;
+	stride = runtime->frame_bits >> 3;
+
+	dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size,
+		runtime->dma_area, buf_pos,
+		(unsigned int)runtime->buffer_size, stride);
+
+	if (buf_pos + size >= runtime->buffer_size * stride) {
+		unsigned int cnt = runtime->buffer_size * stride - buf_pos;
+		memcpy(runtime->dma_area + buf_pos, buf, cnt);
+		memcpy(runtime->dma_area, buf + cnt, size - cnt);
+	} else
+		memcpy(runtime->dma_area + buf_pos, buf, size);
+
+	chip->buf_pos += size;
+	if (chip->buf_pos >= runtime->buffer_size * stride)
+		chip->buf_pos -= runtime->buffer_size * stride;
+
+	chip->period_pos += size;
+	if (chip->period_pos >= runtime->period_size) {
+		chip->period_pos -= runtime->period_size;
+		period_elapsed = 1;
+	}
+
+	if (period_elapsed)
+		snd_pcm_period_elapsed(substream);
+
+	return 0;
+}
+
 /*
  * hw_params callback
  */
 static int snd_tm6000_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_pcm_hw_params *hw_params)
 {
-	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
-	if (substream->runtime->dma_area) {
-		dsp_buffer_free(chip);
-		substream->runtime->dma_area = NULL;
-	}
-
-	chip->period_size = params_period_bytes(hw_params);
-	chip->num_periods = params_periods(hw_params);
-	chip->bufsize = chip->period_size * params_periods(hw_params);
+	int size, rc;
 
-	BUG_ON(!chip->bufsize);
-
-	dprintk(1, "Setting buffer\n");
-
-	/* FIXME: Allocate buffer for audio */
+	size = params_period_bytes(hw_params) * params_periods(hw_params);
 
+	rc = dsp_buffer_alloc(substream, size);
+	if (rc < 0)
+		return rc;
 
 	return 0;
 }
@@ -233,13 +271,9 @@ static int snd_tm6000_hw_params(struct snd_pcm_substream *substream,
  */
 static int snd_tm6000_hw_free(struct snd_pcm_substream *substream)
 {
-
 	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
 
-	if (substream->runtime->dma_area) {
-		dsp_buffer_free(chip);
-		substream->runtime->dma_area = NULL;
-	}
+	_tm6000_stop_audio_dma(chip);
 
 	return 0;
 }
@@ -249,6 +283,11 @@ static int snd_tm6000_hw_free(struct snd_pcm_substream *substream)
  */
 static int snd_tm6000_prepare(struct snd_pcm_substream *substream)
 {
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+	chip->buf_pos = 0;
+	chip->period_pos = 0;
+
 	return 0;
 }
 
@@ -286,12 +325,8 @@ static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd)
 static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream)
 {
 	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	u16 count;
-
-	count = atomic_read(&chip->count);
 
-	return runtime->period_size * (count & (runtime->periods-1));
+	return chip->buf_pos;
 }
 
 /*
@@ -311,21 +346,6 @@ static struct snd_pcm_ops snd_tm6000_pcm_ops = {
 /*
  * create a PCM device
  */
-static int __devinit snd_tm6000_pcm(struct snd_tm6000_card *chip,
-				    int device, char *name)
-{
-	int err;
-	struct snd_pcm *pcm;
-
-	err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
-	if (err < 0)
-		return err;
-	pcm->private_data = chip;
-	strcpy(pcm->name, name);
-	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
-
-	return 0;
-}
 
 /* FIXME: Control interface - How to control volume/mute? */
 
@@ -336,27 +356,41 @@ static int __devinit snd_tm6000_pcm(struct snd_tm6000_card *chip,
 /*
  * Alsa Constructor - Component probe
  */
-
-int tm6000_audio_init(struct tm6000_core *dev, int idx)
+int tm6000_audio_init(struct tm6000_core *dev)
 {
-	struct snd_card         *card;
-	struct snd_tm6000_card  *chip;
-	int                     rc, len;
-	char                    component[14];
+	struct snd_card		*card;
+	struct snd_tm6000_card	*chip;
+	int			rc;
+	static int		devnr;
+	char			component[14];
+	struct snd_pcm		*pcm;
 
-	if (idx >= SNDRV_CARDS)
+	if (!dev)
+		return 0;
+
+	if (devnr >= SNDRV_CARDS)
 		return -ENODEV;
 
-	if (!enable[idx])
+	if (!enable[devnr])
 		return -ENOENT;
 
-	rc = snd_card_create(index[idx], id[idx], THIS_MODULE, 0, &card);
+	rc = snd_card_create(index[devnr], "tm6000", THIS_MODULE, 0, &card);
 	if (rc < 0) {
-		snd_printk(KERN_ERR "cannot create card instance %d\n", idx);
+		snd_printk(KERN_ERR "cannot create card instance %d\n", devnr);
 		return rc;
 	}
+	strcpy(card->driver, "tm6000-alsa");
+	strcpy(card->shortname, "TM5600/60x0");
+	sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d",
+		dev->udev->bus->busnum, dev->udev->devnum);
 
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	sprintf(component, "USB%04x:%04x",
+		le16_to_cpu(dev->udev->descriptor.idVendor),
+		le16_to_cpu(dev->udev->descriptor.idProduct));
+	snd_component_add(card, component);
+	snd_card_set_dev(card, &dev->udev->dev);
+
+	chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL);
 	if (!chip) {
 		rc = -ENOMEM;
 		goto error;
@@ -364,45 +398,24 @@ int tm6000_audio_init(struct tm6000_core *dev, int idx)
 
 	chip->core = dev;
 	chip->card = card;
+	dev->adev = chip;
+	spin_lock_init(&chip->reg_lock);
 
-	strcpy(card->driver, "tm6000-alsa");
-	sprintf(component, "USB%04x:%04x",
-		le16_to_cpu(dev->udev->descriptor.idVendor),
-		le16_to_cpu(dev->udev->descriptor.idProduct));
-	snd_component_add(card, component);
-
-	if (dev->udev->descriptor.iManufacturer)
-		len = usb_string(dev->udev,
-				 dev->udev->descriptor.iManufacturer,
-				 card->longname, sizeof(card->longname));
-	else
-		len = 0;
-
-	if (len > 0)
-		strlcat(card->longname, " ", sizeof(card->longname));
-
-	strlcat(card->longname, card->shortname, sizeof(card->longname));
-
-	len = strlcat(card->longname, " at ", sizeof(card->longname));
-
-	if (len < sizeof(card->longname))
-		usb_make_path(dev->udev, card->longname + len,
-			      sizeof(card->longname) - len);
-
-	strlcat(card->longname,
-		dev->udev->speed == USB_SPEED_LOW ? ", low speed" :
-		dev->udev->speed == USB_SPEED_FULL ? ", full speed" :
-							   ", high speed",
-		sizeof(card->longname));
-
-	rc = snd_tm6000_pcm(chip, 0, "tm6000 Digital");
+	rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm);
 	if (rc < 0)
 		goto error;
 
+	pcm->info_flags = 0;
+	pcm->private_data = chip;
+	strcpy(pcm->name, "Trident TM5600/60x0");
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
+
 	rc = snd_card_register(card);
 	if (rc < 0)
 		goto error;
 
+	dprintk(1,"Registered audio driver for %s\n", card->longname);
 
 	return 0;
 
@@ -410,5 +423,45 @@ error:
 	snd_card_free(card);
 	return rc;
 }
-EXPORT_SYMBOL_GPL(tm6000_audio_init);
 
+static int tm6000_audio_fini(struct tm6000_core *dev)
+{
+	struct snd_tm6000_card	*chip = dev->adev;
+
+	if (!dev)
+		return 0;
+
+	if (!chip)
+		return 0;
+
+	if (!chip->card)
+		return 0;
+
+	snd_card_free(chip->card);
+	chip->card = NULL;
+	kfree(chip);
+	dev->adev = NULL;
+
+	return 0;
+}
+
+struct tm6000_ops audio_ops = {
+	.type	= TM6000_AUDIO,
+	.name	= "TM6000 Audio Extension",
+	.init	= tm6000_audio_init,
+	.fini	= tm6000_audio_fini,
+	.fillbuf = tm6000_fillbuf,
+};
+
+static int __init tm6000_alsa_register(void)
+{
+	return tm6000_register_extension(&audio_ops);
+}
+
+static void __exit tm6000_alsa_unregister(void)
+{
+	tm6000_unregister_extension(&audio_ops);
+}
+
+module_init(tm6000_alsa_register);
+module_exit(tm6000_alsa_unregister);
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 6143e20d139..9d091c34991 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -24,10 +24,12 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <linux/version.h>
+#include <linux/slab.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include <media/tvaudio.h>
 #include <media/i2c-addr.h>
+#include <media/rc-map.h>
 
 #include "tm6000.h"
 #include "tm6000-regs.h"
@@ -68,6 +70,8 @@ struct tm6000_board {
 	int             demod_addr;     /* demodulator address */
 
 	struct tm6000_gpio gpio;
+
+	char		*ir_codes;
 };
 
 struct tm6000_board tm6000_boards[] = {
@@ -275,6 +279,7 @@ struct tm6000_board tm6000_boards[] = {
 			.dvb_led	= TM6010_GPIO_5,
 			.ir		= TM6010_GPIO_0,
 		},
+		.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 	},
 	[TM6010_BOARD_TWINHAN_TU501] = {
 		.name         = "Twinhan TU501(704D1)",
@@ -346,7 +351,7 @@ int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
 	}
 	return (rc);
 }
-
+EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
 
 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 
@@ -360,16 +365,12 @@ int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 
 	switch (command) {
 	case XC2028_RESET_CLK:
+		tm6000_ir_wait(dev, 0);
+
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 					0x02, arg);
 		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					TM6000_GPIO_CLK, 0);
-		if (rc < 0)
-			return rc;
-		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					TM6000_GPIO_CLK, 1);
+		rc = tm6000_i2c_reset(dev, 10);
 		break;
 	case XC2028_TUNER_RESET:
 		/* Reset codes during load firmware */
@@ -415,27 +416,22 @@ int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 				msleep(130);
 				break;
 			}
+
+			tm6000_ir_wait(dev, 1);
 			break;
 		case 1:
 			tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 						0x02, 0x01);
 			msleep(10);
 			break;
-
 		case 2:
-			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-						TM6000_GPIO_CLK, 0);
-			if (rc < 0)
-				return rc;
-			msleep(100);
-			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-						TM6000_GPIO_CLK, 1);
-			msleep(100);
+			rc = tm6000_i2c_reset(dev, 100);
 			break;
 		}
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
 
 int tm6000_cards_setup(struct tm6000_core *dev)
 {
@@ -563,7 +559,7 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 
 	switch (dev->tuner_type) {
 	case TUNER_XC2028:
-		tun_setup.tuner_callback = tm6000_tuner_callback;;
+		tun_setup.tuner_callback = tm6000_tuner_callback;
 		break;
 	case TUNER_XC5000:
 		tun_setup.tuner_callback = tm6000_xc5000_callback;
@@ -647,6 +643,8 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 
 	dev->gpio = tm6000_boards[dev->model].gpio;
 
+	dev->ir_codes = tm6000_boards[dev->model].ir_codes;
+
 	dev->demod_addr = tm6000_boards[dev->model].demod_addr;
 
 	dev->caps = tm6000_boards[dev->model].caps;
@@ -692,28 +690,14 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 	if (rc < 0)
 		goto err;
 
-	if (dev->caps.has_dvb) {
-		dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL);
-		if (!dev->dvb) {
-			rc = -ENOMEM;
-			goto err2;
-		}
+	tm6000_add_into_devlist(dev);
+	tm6000_init_extension(dev);
+
+	tm6000_ir_init(dev);
 
-#ifdef CONFIG_VIDEO_TM6000_DVB
-		rc = tm6000_dvb_register(dev);
-		if (rc < 0) {
-			kfree(dev->dvb);
-			dev->dvb = NULL;
-			goto err2;
-		}
-#endif
-	}
 	mutex_unlock(&dev->lock);
 	return 0;
 
-err2:
-	v4l2_device_unregister(&dev->v4l2_dev);
-
 err:
 	mutex_unlock(&dev->lock);
 	return rc;
@@ -732,7 +716,7 @@ static void get_max_endpoint(struct usb_device *udev,
 	unsigned int size = tmp & 0x7ff;
 
 	if (udev->speed == USB_SPEED_HIGH)
-		size = size * hb_mult (tmp);
+		size = size * hb_mult(tmp);
 
 	if (size > tm_ep->maxsize) {
 		tm_ep->endp = curr_e;
@@ -856,6 +840,19 @@ static int tm6000_usb_probe(struct usb_interface *interface,
 							 &dev->isoc_out);
 				}
 				break;
+			case USB_ENDPOINT_XFER_INT:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT IN", e,
+							&dev->int_in);
+				} else {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT OUT", e,
+							&dev->int_out);
+				}
+				break;
 			}
 		}
 	}
@@ -914,13 +911,27 @@ static void tm6000_usb_disconnect(struct usb_interface *interface)
 
 	mutex_lock(&dev->lock);
 
-#ifdef CONFIG_VIDEO_TM6000_DVB
-	if (dev->dvb) {
-		tm6000_dvb_unregister(dev);
-		kfree(dev->dvb);
-	}
-#endif
+	tm6000_ir_fini(dev);
 
+	if (dev->gpio.power_led) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			msleep(15);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			msleep(15);
+			break;
+		}
+	}
 	tm6000_v4l2_unregister(dev);
 
 	tm6000_i2c_unregister(dev);
@@ -931,6 +942,9 @@ static void tm6000_usb_disconnect(struct usb_interface *interface)
 
 	usb_put_dev(dev->udev);
 
+	tm6000_close_extension(dev);
+	tm6000_remove_from_devlist(dev);
+
 	mutex_unlock(&dev->lock);
 	kfree(dev);
 }
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index bfbc53bd291..cded411d8bb 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -22,6 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include "tm6000.h"
@@ -31,66 +32,64 @@
 
 #define USB_TIMEOUT	5*HZ /* ms */
 
-int tm6000_read_write_usb (struct tm6000_core *dev, u8 req_type, u8 req,
-			   u16 value, u16 index, u8 *buf, u16 len)
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req,
+			  u16 value, u16 index, u8 *buf, u16 len)
 {
 	int          ret, i;
 	unsigned int pipe;
-	static int   ini=0, last=0, n=0;
-	u8	     *data=NULL;
+	static int   ini = 0, last = 0, n = 0;
+	u8	     *data = NULL;
 
 	if (len)
 		data = kzalloc(len, GFP_KERNEL);
 
 
 	if (req_type & USB_DIR_IN)
-		pipe=usb_rcvctrlpipe(dev->udev, 0);
+		pipe = usb_rcvctrlpipe(dev->udev, 0);
 	else {
-		pipe=usb_sndctrlpipe(dev->udev, 0);
+		pipe = usb_sndctrlpipe(dev->udev, 0);
 		memcpy(data, buf, len);
 	}
 
 	if (tm6000_debug & V4L2_DEBUG_I2C) {
 		if (!ini)
-			last=ini=jiffies;
+			last = ini = jiffies;
 
 		printk("%06i (dev %p, pipe %08x): ", n, dev->udev, pipe);
 
-		printk( "%s: %06u ms %06u ms %02x %02x %02x %02x %02x %02x %02x %02x ",
-			(req_type & USB_DIR_IN)?" IN":"OUT",
+		printk("%s: %06u ms %06u ms %02x %02x %02x %02x %02x %02x %02x %02x ",
+			(req_type & USB_DIR_IN) ? " IN" : "OUT",
 			jiffies_to_msecs(jiffies-last),
 			jiffies_to_msecs(jiffies-ini),
-			req_type, req,value&0xff,value>>8, index&0xff, index>>8,
-			len&0xff, len>>8);
-		last=jiffies;
+			req_type, req, value&0xff, value>>8, index&0xff,
+			index>>8, len&0xff, len>>8);
+		last = jiffies;
 		n++;
 
-		if ( !(req_type & USB_DIR_IN) ) {
+		if (!(req_type & USB_DIR_IN)) {
 			printk(">>> ");
-			for (i=0;i<len;i++) {
-				printk(" %02x",buf[i]);
-			}
+			for (i = 0; i < len; i++)
+				printk(" %02x", buf[i]);
 		printk("\n");
 		}
 	}
 
-	ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index, data,
-			      len, USB_TIMEOUT);
+	ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index,
+			      data, len, USB_TIMEOUT);
 
 	if (req_type &  USB_DIR_IN)
 		memcpy(buf, data, len);
 
 	if (tm6000_debug & V4L2_DEBUG_I2C) {
-		if (ret<0) {
+		if (ret < 0) {
 			if (req_type &  USB_DIR_IN)
-				printk("<<< (len=%d)\n",len);
+				printk("<<< (len=%d)\n", len);
 
 			printk("%s: Error #%d\n", __FUNCTION__, ret);
 		} else if (req_type &  USB_DIR_IN) {
 			printk("<<< ");
-			for (i=0;i<len;i++) {
-				printk(" %02x",buf[i]);
-			}
+			for (i = 0; i < len; i++)
+				printk(" %02x", buf[i]);
 			printk("\n");
 		}
 	}
@@ -102,57 +101,73 @@ int tm6000_read_write_usb (struct tm6000_core *dev, u8 req_type, u8 req,
 	return ret;
 }
 
-int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 {
 	return
-		tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR,
-				       req, value, index, NULL, 0);
+		tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+				      req, value, index, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(tm6000_set_reg);
 
-int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 {
 	int rc;
 	u8 buf[1];
 
-	rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
-				       value, index, buf, 1);
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 1);
 
-	if (rc<0)
+	if (rc < 0)
 		return rc;
 
 	return *buf;
 }
 EXPORT_SYMBOL_GPL(tm6000_get_reg);
 
-int tm6000_get_reg16 (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 {
 	int rc;
 	u8 buf[2];
 
-	rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
-				       value, index, buf, 2);
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 2);
 
-	if (rc<0)
+	if (rc < 0)
 		return rc;
 
 	return buf[1]|buf[0]<<8;
 }
 
-int tm6000_get_reg32 (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 {
 	int rc;
 	u8 buf[4];
 
-	rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
-				       value, index, buf, 4);
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 4);
 
-	if (rc<0)
+	if (rc < 0)
 		return rc;
 
 	return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
 }
 
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
+{
+	int rc;
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
+	if (rc < 0)
+		return rc;
+
+	msleep(tsleep);
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
+	msleep(tsleep);
+
+	return rc;
+}
+
 void tm6000_set_fourcc_format(struct tm6000_core *dev)
 {
 	if (dev->dev_type == TM6010) {
@@ -171,7 +186,7 @@ void tm6000_set_fourcc_format(struct tm6000_core *dev)
 	}
 }
 
-int tm6000_init_analog_mode (struct tm6000_core *dev)
+int tm6000_init_analog_mode(struct tm6000_core *dev)
 {
 	if (dev->dev_type == TM6010) {
 		int val;
@@ -277,12 +292,10 @@ int tm6000_init_analog_mode (struct tm6000_core *dev)
 		/* Enables soft reset */
 		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
 
-		if (dev->scaler) {
+		if (dev->scaler)
 			tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20);
-		} else {
-			/* Enable Hfilter and disable TS Drop err */
+		else	/* Enable Hfilter and disable TS Drop err */
 			tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80);
-		}
 
 		tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88);
 		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0x23);
@@ -315,18 +328,24 @@ int tm6000_init_analog_mode (struct tm6000_core *dev)
 	/*FIXME: Hack!!! */
 	struct v4l2_frequency f;
 	mutex_lock(&dev->lock);
-	f.frequency=dev->freq;
+	f.frequency = dev->freq;
 	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
 	mutex_unlock(&dev->lock);
 
 	msleep(100);
-	tm6000_set_standard (dev, &dev->norm);
-	tm6000_set_audio_bitrate (dev,48000);
+	tm6000_set_standard(dev, &dev->norm);
+	tm6000_set_audio_bitrate(dev, 48000);
+
+	/* switch dvb led off */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x01);
+	}
 
 	return 0;
 }
 
-int tm6000_init_digital_mode (struct tm6000_core *dev)
+int tm6000_init_digital_mode(struct tm6000_core *dev)
 {
 	if (dev->dev_type == TM6010) {
 		int val;
@@ -343,10 +362,8 @@ int tm6000_init_digital_mode (struct tm6000_core *dev)
 		tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
 		tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
 		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
-		tm6000_read_write_usb (dev, 0xc0, 0x0e, 0x00c2, 0x0008, buf, 2);
-		printk (KERN_INFO "buf %#x %#x \n", buf[0], buf[1]);
-
-
+		tm6000_read_write_usb(dev, 0xc0, 0x0e, 0x00c2, 0x0008, buf, 2);
+		printk(KERN_INFO"buf %#x %#x\n", buf[0], buf[1]);
 	} else  {
 		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
 		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
@@ -354,7 +371,7 @@ int tm6000_init_digital_mode (struct tm6000_core *dev)
 		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0x08);
 		tm6000_set_reg(dev, TM6010_REQ07_RE2_OUT_SEL2, 0x0c);
 		tm6000_set_reg(dev, TM6010_REQ07_RE8_TYPESEL_MOS_I2S, 0xff);
-		tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00eb, 0xd8);
+		tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x00eb, 0xd8);
 		tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40);
 		tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
 		tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09);
@@ -365,18 +382,26 @@ int tm6000_init_digital_mode (struct tm6000_core *dev)
 
 		tm6000_set_reg(dev, TM6010_REQ07_RE2_OUT_SEL2, 0x0c);
 		tm6000_set_reg(dev, TM6010_REQ07_RE8_TYPESEL_MOS_I2S, 0xff);
-		tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00eb, 0x08);
+		tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x00eb, 0x08);
 		msleep(50);
 
-		tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
 		msleep(50);
-		tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
 		msleep(50);
-		tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
 		msleep(100);
 	}
+
+	/* switch dvb led on */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x00);
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL(tm6000_init_digital_mode);
 
 struct reg_init {
 	u8 req;
@@ -536,9 +561,9 @@ struct reg_init tm6010_init_tab[] = {
 	{ TM6010_REQ07_RD8_IR_WAKEUP_SEL,  0xff },
 };
 
-int tm6000_init (struct tm6000_core *dev)
+int tm6000_init(struct tm6000_core *dev)
 {
-	int board, rc=0, i, size;
+	int board, rc = 0, i, size;
 	struct reg_init *tab;
 
 	if (dev->dev_type == TM6010) {
@@ -550,12 +575,12 @@ int tm6000_init (struct tm6000_core *dev)
 	}
 
 	/* Load board's initialization table */
-	for (i=0; i< size; i++) {
-		rc= tm6000_set_reg (dev, tab[i].req, tab[i].reg, tab[i].val);
-		if (rc<0) {
-			printk (KERN_ERR "Error %i while setting req %d, "
-					 "reg %d to value %d\n", rc,
-					 tab[i].req,tab[i].reg, tab[i].val);
+	for (i = 0; i < size; i++) {
+		rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
+		if (rc < 0) {
+			printk(KERN_ERR "Error %i while setting req %d, "
+					"reg %d to value %d\n", rc,
+					tab[i].req, tab[i].reg, tab[i].val);
 			return rc;
 		}
 	}
@@ -563,12 +588,11 @@ int tm6000_init (struct tm6000_core *dev)
 	msleep(5); /* Just to be conservative */
 
 	/* Check board version - maybe 10Moons specific */
-	board=tm6000_get_reg32 (dev, REQ_40_GET_VERSION, 0, 0);
-	if (board >=0) {
-		printk (KERN_INFO "Board version = 0x%08x\n",board);
-	} else {
-		printk (KERN_ERR "Error %i while retrieving board version\n",board);
-	}
+	board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+	if (board >= 0)
+		printk(KERN_INFO "Board version = 0x%08x\n", board);
+	else
+		printk(KERN_ERR "Error %i while retrieving board version\n", board);
 
 	rc = tm6000_cards_setup(dev);
 
@@ -579,24 +603,142 @@ int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
 {
 	int val;
 
-	val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x0);
-printk("Original value=%d\n",val);
-	if (val<0)
+	if (dev->dev_type == TM6010) {
+		val = tm6000_get_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0);
+		if (val < 0)
+			return val;
+		val = (val & 0xf0) | 0x1; /* 48 kHz, not muted */
+		val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, val);
+		if (val < 0)
+			return val;
+	}
+
+	val = tm6000_get_reg(dev, REQ_07_SET_GET_AVREG, 0xeb, 0x0);
+	if (val < 0)
 		return val;
 
 	val &= 0x0f;		/* Preserve the audio input control bits */
 	switch (bitrate) {
 	case 44100:
-		val|=0xd0;
-		dev->audio_bitrate=bitrate;
+		val |= 0xd0;
+		dev->audio_bitrate = bitrate;
 		break;
 	case 48000:
-		val|=0x60;
-		dev->audio_bitrate=bitrate;
+		val |= 0x60;
+		dev->audio_bitrate = bitrate;
 		break;
 	}
-	val=tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, val);
+	val = tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xeb, val);
 
 	return val;
 }
 EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+
+static LIST_HEAD(tm6000_devlist);
+static DEFINE_MUTEX(tm6000_devlist_mutex);
+
+/*
+ * tm6000_realease_resource()
+ */
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_del(&dev->devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+void tm6000_add_into_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_add_tail(&dev->devlist, &tm6000_devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(tm6000_extension_devlist);
+static DEFINE_MUTEX(tm6000_extension_devlist_lock);
+
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+			char *buf, int size)
+{
+	struct tm6000_ops *ops = NULL;
+
+	/* FIXME: tm6000_extension_devlist_lock should be a spinlock */
+
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->fillbuf && ops->type == type)
+				ops->fillbuf(dev, buf, size);
+		}
+	}
+
+	return 0;
+}
+
+int tm6000_register_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	mutex_lock(&tm6000_extension_devlist_lock);
+	list_add_tail(&ops->next, &tm6000_extension_devlist);
+	list_for_each_entry(dev, &tm6000_devlist, devlist) {
+		ops->init(dev);
+		printk(KERN_INFO "%s: Initialized (%s) extension\n",
+		       dev->name, ops->name);
+	}
+	mutex_unlock(&tm6000_extension_devlist_lock);
+	mutex_unlock(&tm6000_devlist_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(tm6000_register_extension);
+
+void tm6000_unregister_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	list_for_each_entry(dev, &tm6000_devlist, devlist) {
+		if (dev)
+			ops->fini(dev);
+	}
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
+	list_del(&ops->next);
+	mutex_unlock(&tm6000_extension_devlist_lock);
+	mutex_unlock(&tm6000_devlist_mutex);
+}
+EXPORT_SYMBOL(tm6000_unregister_extension);
+
+void tm6000_init_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->init)
+				ops->init(dev);
+		}
+	}
+	mutex_unlock(&tm6000_extension_devlist_lock);
+}
+
+void tm6000_close_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->fini)
+				ops->fini(dev);
+		}
+	}
+	mutex_unlock(&tm6000_extension_devlist_lock);
+}
diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c
index eafc89c22b6..f501edccf9c 100644
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ b/drivers/staging/tm6000/tm6000-dvb.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 
 #include "tm6000.h"
@@ -28,13 +29,27 @@
 #include <media/tuner.h>
 
 #include "tuner-xc2028.h"
+#include "xc5000.h"
 
-static void inline print_err_status (struct tm6000_core *dev,
-				     int packet, int status)
+MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},"
+			"{{Trident, tm6000},"
+			"{{Trident, tm6010}");
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug message");
+
+static inline void print_err_status(struct tm6000_core *dev,
+				    int packet, int status)
 {
 	char *errmsg = "Unknown";
 
-	switch(status) {
+	switch (status) {
 	case -ENOENT:
 		errmsg = "unlinked synchronuously";
 		break;
@@ -60,7 +75,7 @@ static void inline print_err_status (struct tm6000_core *dev,
 		errmsg = "Device does not respond";
 		break;
 	}
-	if (packet<0) {
+	if (packet < 0) {
 		dprintk(dev, 1, "URB status %d [%s].\n",
 			status, errmsg);
 	} else {
@@ -72,19 +87,17 @@ static void inline print_err_status (struct tm6000_core *dev,
 static void tm6000_urb_received(struct urb *urb)
 {
 	int ret;
-	struct tm6000_core* dev = urb->context;
+	struct tm6000_core *dev = urb->context;
 
-	if(urb->status != 0) {
-		print_err_status (dev,0,urb->status);
-	}
-	else if(urb->actual_length>0){
+	if (urb->status != 0)
+		print_err_status(dev, 0, urb->status);
+	else if (urb->actual_length > 0)
 		dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
 						   urb->actual_length);
-	}
 
-	if(dev->dvb->streams > 0) {
+	if (dev->dvb->streams > 0) {
 		ret = usb_submit_urb(urb, GFP_ATOMIC);
-		if(ret < 0) {
+		if (ret < 0) {
 			printk(KERN_ERR "tm6000:  error %s\n", __FUNCTION__);
 			kfree(urb->transfer_buffer);
 			usb_free_urb(urb);
@@ -98,12 +111,15 @@ int tm6000_start_stream(struct tm6000_core *dev)
 	unsigned int pipe, size;
 	struct tm6000_dvb *dvb = dev->dvb;
 
-	printk(KERN_INFO "tm6000: got start stream request %s\n",__FUNCTION__);
+	printk(KERN_INFO "tm6000: got start stream request %s\n", __FUNCTION__);
 
-	tm6000_init_digital_mode(dev);
+	if (dev->mode != TM6000_MODE_DIGITAL) {
+		tm6000_init_digital_mode(dev);
+		dev->mode = TM6000_MODE_DIGITAL;
+	}
 
 	dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if(dvb->bulk_urb == NULL) {
+	if (dvb->bulk_urb == NULL) {
 		printk(KERN_ERR "tm6000: couldn't allocate urb\n");
 		return -ENOMEM;
 	}
@@ -115,7 +131,7 @@ int tm6000_start_stream(struct tm6000_core *dev)
 	size = size * 15; /* 512 x 8 or 12 or 15 */
 
 	dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
-	if(dvb->bulk_urb->transfer_buffer == NULL) {
+	if (dvb->bulk_urb->transfer_buffer == NULL) {
 		usb_free_urb(dvb->bulk_urb);
 		printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n");
 		return -ENOMEM;
@@ -127,20 +143,20 @@ int tm6000_start_stream(struct tm6000_core *dev)
 						 tm6000_urb_received, dev);
 
 	ret = usb_clear_halt(dev->udev, pipe);
-	if(ret < 0) {
-		printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",ret,__FUNCTION__);
+	if (ret < 0) {
+		printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",
+							ret, __FUNCTION__);
 		return ret;
-	}
-	else {
+	} else
 		printk(KERN_ERR "tm6000: pipe resetted\n");
-	}
 
 /*	mutex_lock(&tm6000_driver.open_close_mutex); */
 	ret = usb_submit_urb(dvb->bulk_urb, GFP_KERNEL);
 
 /*	mutex_unlock(&tm6000_driver.open_close_mutex); */
 	if (ret) {
-		printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",ret);
+		printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",
+									ret);
 
 		kfree(dvb->bulk_urb->transfer_buffer);
 		usb_free_urb(dvb->bulk_urb);
@@ -154,10 +170,10 @@ void tm6000_stop_stream(struct tm6000_core *dev)
 {
 	struct tm6000_dvb *dvb = dev->dvb;
 
-	if(dvb->bulk_urb) {
-		printk (KERN_INFO "urb killing\n");
+	if (dvb->bulk_urb) {
+		printk(KERN_INFO "urb killing\n");
 		usb_kill_urb(dvb->bulk_urb);
-		printk (KERN_INFO "urb buffer free\n");
+		printk(KERN_INFO "urb buffer free\n");
 		kfree(dvb->bulk_urb->transfer_buffer);
 		usb_free_urb(dvb->bulk_urb);
 		dvb->bulk_urb = NULL;
@@ -169,35 +185,34 @@ int tm6000_start_feed(struct dvb_demux_feed *feed)
 	struct dvb_demux *demux = feed->demux;
 	struct tm6000_core *dev = demux->priv;
 	struct tm6000_dvb *dvb = dev->dvb;
-	printk(KERN_INFO "tm6000: got start feed request %s\n",__FUNCTION__);
+	printk(KERN_INFO "tm6000: got start feed request %s\n", __FUNCTION__);
 
 	mutex_lock(&dvb->mutex);
-	if(dvb->streams == 0) {
+	if (dvb->streams == 0) {
 		dvb->streams = 1;
 /*		mutex_init(&tm6000_dev->streming_mutex); */
 		tm6000_start_stream(dev);
-	}
-	else {
+	} else
 		++(dvb->streams);
-	}
 	mutex_unlock(&dvb->mutex);
 
 	return 0;
 }
 
-int tm6000_stop_feed(struct dvb_demux_feed *feed) {
+int tm6000_stop_feed(struct dvb_demux_feed *feed)
+{
 	struct dvb_demux *demux = feed->demux;
 	struct tm6000_core *dev = demux->priv;
 	struct tm6000_dvb *dvb = dev->dvb;
 
-	printk(KERN_INFO "tm6000: got stop feed request %s\n",__FUNCTION__);
+	printk(KERN_INFO "tm6000: got stop feed request %s\n", __FUNCTION__);
 
 	mutex_lock(&dvb->mutex);
 
-	printk (KERN_INFO "stream %#x\n", dvb->streams);
+	printk(KERN_INFO "stream %#x\n", dvb->streams);
 	--(dvb->streams);
-	if(dvb->streams == 0) {
-		printk (KERN_INFO "stop stream\n");
+	if (dvb->streams == 0) {
+		printk(KERN_INFO "stop stream\n");
 		tm6000_stop_stream(dev);
 /*		mutex_destroy(&tm6000_dev->streaming_mutex); */
 	}
@@ -211,9 +226,9 @@ int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
 {
 	struct tm6000_dvb *dvb = dev->dvb;
 
-	if(dev->caps.has_zl10353) {
-		struct zl10353_config config =
-				    {.demod_address = dev->demod_addr,
+	if (dev->caps.has_zl10353) {
+		struct zl10353_config config = {
+				     .demod_address = dev->demod_addr,
 				     .no_tuner = 1,
 				     .parallel_ts = 1,
 				     .if2 = 45700,
@@ -222,8 +237,7 @@ int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
 
 		dvb->frontend = dvb_attach(zl10353_attach, &config,
 							   &dev->i2c_adap);
-	}
-	else {
+	} else {
 		printk(KERN_ERR "tm6000: no frontend defined for the device!\n");
 		return -1;
 	}
@@ -233,7 +247,7 @@ int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-int tm6000_dvb_register(struct tm6000_core *dev)
+int register_dvb(struct tm6000_core *dev)
 {
 	int ret = -1;
 	struct tm6000_dvb *dvb = dev->dvb;
@@ -244,40 +258,67 @@ int tm6000_dvb_register(struct tm6000_core *dev)
 
 	/* attach the frontend */
 	ret = tm6000_dvb_attach_frontend(dev);
-	if(ret < 0) {
+	if (ret < 0) {
 		printk(KERN_ERR "tm6000: couldn't attach the frontend!\n");
 		goto err;
 	}
 
 	ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T",
-							  THIS_MODULE, &dev->udev->dev, adapter_nr);
+					THIS_MODULE, &dev->udev->dev, adapter_nr);
 	dvb->adapter.priv = dev;
 
 	if (dvb->frontend) {
-		struct xc2028_config cfg = {
-			.i2c_adap = &dev->i2c_adap,
-			.i2c_addr = dev->tuner_addr,
-		};
-
-		dvb->frontend->callback = tm6000_tuner_callback;
-		ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
-		if (ret < 0) {
-			printk(KERN_ERR
-				"tm6000: couldn't register frontend\n");
-			goto adapter_err;
+		switch (dev->tuner_type) {
+		case TUNER_XC2028: {
+			struct xc2028_config cfg = {
+				.i2c_adap = &dev->i2c_adap,
+				.i2c_addr = dev->tuner_addr,
+			};
+
+			dvb->frontend->callback = tm6000_tuner_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
+
+			if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc3028)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
+		case TUNER_XC5000: {
+			struct xc5000_config cfg = {
+				.i2c_address = dev->tuner_addr,
+			};
+
+			dvb->frontend->callback = tm6000_xc5000_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
+
+			if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc5000)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC5000 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
 		}
-
-		if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
-			printk(KERN_ERR "tm6000: couldn't register "
-					"frontend (xc3028)\n");
-			ret = -EINVAL;
-			goto frontend_err;
-		}
-		printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
-				 "attached to frontend!\n");
-	} else {
+	} else
 		printk(KERN_ERR "tm6000: no frontend found\n");
-	}
 
 	dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING
 							    | DMX_MEMORY_BASED_FILTERING;
@@ -288,7 +329,7 @@ int tm6000_dvb_register(struct tm6000_core *dev)
 	dvb->demux.stop_feed = tm6000_stop_feed;
 	dvb->demux.write_to_decoder = NULL;
 	ret = dvb_dmx_init(&dvb->demux);
-	if(ret < 0) {
+	if (ret < 0) {
 		printk("tm6000: dvb_dmx_init failed (errno = %d)\n", ret);
 		goto frontend_err;
 	}
@@ -298,7 +339,7 @@ int tm6000_dvb_register(struct tm6000_core *dev)
 	dvb->dmxdev.capabilities = 0;
 
 	ret =  dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
-	if(ret < 0) {
+	if (ret < 0) {
 		printk("tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret);
 		goto dvb_dmx_err;
 	}
@@ -308,7 +349,7 @@ int tm6000_dvb_register(struct tm6000_core *dev)
 dvb_dmx_err:
 	dvb_dmx_release(&dvb->demux);
 frontend_err:
-	if(dvb->frontend) {
+	if (dvb->frontend) {
 		dvb_frontend_detach(dvb->frontend);
 		dvb_unregister_frontend(dvb->frontend);
 	}
@@ -318,11 +359,11 @@ err:
 	return ret;
 }
 
-void tm6000_dvb_unregister(struct tm6000_core *dev)
+void unregister_dvb(struct tm6000_core *dev)
 {
 	struct tm6000_dvb *dvb = dev->dvb;
 
-	if(dvb->bulk_urb != NULL) {
+	if (dvb->bulk_urb != NULL) {
 		struct urb *bulk_urb = dvb->bulk_urb;
 
 		kfree(bulk_urb->transfer_buffer);
@@ -332,7 +373,7 @@ void tm6000_dvb_unregister(struct tm6000_core *dev)
 	}
 
 /*	mutex_lock(&tm6000_driver.open_close_mutex); */
-	if(dvb->frontend) {
+	if (dvb->frontend) {
 		dvb_frontend_detach(dvb->frontend);
 		dvb_unregister_frontend(dvb->frontend);
 	}
@@ -342,5 +383,70 @@ void tm6000_dvb_unregister(struct tm6000_core *dev)
 	dvb_unregister_adapter(&dvb->adapter);
 	mutex_destroy(&dvb->mutex);
 /*	mutex_unlock(&tm6000_driver.open_close_mutex); */
+}
+
+static int dvb_init(struct tm6000_core *dev)
+{
+	struct tm6000_dvb *dvb;
+	int rc;
 
+	if (!dev)
+		return 0;
+
+	if (!dev->caps.has_dvb)
+		return 0;
+
+	dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL);
+	if (!dvb) {
+		printk(KERN_INFO "Cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	dev->dvb = dvb;
+
+	rc = register_dvb(dev);
+	if (rc < 0) {
+		kfree(dvb);
+		dev->dvb = NULL;
+		return 0;
+	}
+
+	return 0;
 }
+
+static int dvb_fini(struct tm6000_core *dev)
+{
+	if (!dev)
+		return 0;
+
+	if (!dev->caps.has_dvb)
+		return 0;
+
+	if (dev->dvb) {
+		unregister_dvb(dev);
+		kfree(dev->dvb);
+		dev->dvb = NULL;
+	}
+
+	return 0;
+}
+
+static struct tm6000_ops dvb_ops = {
+	.type	= TM6000_DVB,
+	.name	= "TM6000 dvb Extension",
+	.init	= dvb_init,
+	.fini	= dvb_fini,
+};
+
+static int __init tm6000_dvb_register(void)
+{
+	return tm6000_register_extension(&dvb_ops);
+}
+
+static void __exit tm6000_dvb_unregister(void)
+{
+	tm6000_unregister_extension(&dvb_ops);
+}
+
+module_init(tm6000_dvb_register);
+module_exit(tm6000_dvb_unregister);
diff --git a/drivers/staging/tm6000/tm6000-i2c.c b/drivers/staging/tm6000/tm6000-i2c.c
index 94ff489a1bb..79bc67f0311 100644
--- a/drivers/staging/tm6000/tm6000-i2c.c
+++ b/drivers/staging/tm6000/tm6000-i2c.c
@@ -40,7 +40,7 @@ static unsigned int i2c_debug = 0;
 module_param(i2c_debug, int, 0644);
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
-#define i2c_dprintk(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
+#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \
 			printk(KERN_DEBUG "%s at %s: " fmt, \
 			dev->name, __FUNCTION__ , ##args); } while (0)
 
@@ -171,7 +171,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
 		return 0;
 	for (i = 0; i < num; i++) {
 		addr = (msgs[i].addr << 1) & 0xff;
-		i2c_dprintk(2,"%s %s addr=0x%x len=%d:",
+		i2c_dprintk(2, "%s %s addr=0x%x len=%d:",
 			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
 		if (msgs[i].flags & I2C_M_RD) {
@@ -235,7 +235,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 	return num;
 err:
-	i2c_dprintk(2," ERROR: %i\n", rc);
+	i2c_dprintk(2, " ERROR: %i\n", rc);
 	return rc;
 }
 
@@ -266,11 +266,10 @@ static int tm6000_i2c_eeprom(struct tm6000_core *dev,
 		if (0 == (i % 16))
 			printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
 		printk(" %02x", eedata[i]);
-		if ((eedata[i] >= ' ') && (eedata[i] <= 'z')) {
+		if ((eedata[i] >= ' ') && (eedata[i] <= 'z'))
 			bytes[i%16] = eedata[i];
-		} else {
-			bytes[i%16]='.';
-		}
+		else
+			bytes[i%16] = '.';
 
 		i++;
 
@@ -305,15 +304,15 @@ static u32 functionality(struct i2c_adapter *adap)
 }
 
 #define mass_write(addr, reg, data...)					\
-	{ const static u8 _val[] = data;				\
-	rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR,	\
-	REQ_16_SET_GET_I2C_WR1_RDN,(reg<<8)+addr, 0x00, (u8 *) _val,	\
+	{ static const u8 _val[] = data;				\
+	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,	\
+	REQ_16_SET_GET_I2C_WR1_RDN, (reg<<8)+addr, 0x00, (u8 *) _val,	\
 	ARRAY_SIZE(_val));						\
-	if (rc<0) {							\
-		printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc);	\
+	if (rc < 0) {							\
+		printk(KERN_ERR "Error on line %d: %d\n", __LINE__, rc);	\
 		return rc;						\
 	}								\
-	msleep (10);							\
+	msleep(10);							\
 	}
 
 static struct i2c_algorithm tm6000_algo = {
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
new file mode 100644
index 00000000000..32f7a0af693
--- /dev/null
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -0,0 +1,364 @@
+/*
+   tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+
+   Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation version 2
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debug message [IR]");
+
+static unsigned int enable_ir = 1;
+module_param(enable_ir, int, 0644);
+MODULE_PARM_DESC(enable_ir, "enable ir (default is enable");
+
+#undef dprintk
+
+#define dprintk(fmt, arg...) \
+	if (ir_debug) { \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+	}
+
+struct tm6000_ir_poll_result {
+	u8 rc_data[4];
+};
+
+struct tm6000_IR {
+	struct tm6000_core	*dev;
+	struct ir_input_dev	*input;
+	struct ir_input_state	ir;
+	char			name[32];
+	char			phys[32];
+
+	/* poll expernal decoder */
+	int			polling;
+	struct delayed_work	work;
+	u8			wait:1;
+	struct urb		*int_urb;
+	u8			*urb_data;
+	u8			key:1;
+
+	int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
+
+	/* IR device properties */
+	struct ir_dev_props	props;
+};
+
+
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!dev->ir)
+		return;
+
+	if (state)
+		ir->wait = 1;
+	else
+		ir->wait = 0;
+}
+
+
+static int tm6000_ir_config(struct tm6000_IR *ir)
+{
+	struct tm6000_core *dev = ir->dev;
+	u8 buf[10];
+	int rc;
+
+	/* hack */
+	buf[0] = 0xff;
+	buf[1] = 0xff;
+	buf[2] = 0xf2;
+	buf[3] = 0x2b;
+	buf[4] = 0x20;
+	buf[5] = 0x35;
+	buf[6] = 0x60;
+	buf[7] = 0x04;
+	buf[8] = 0xc0;
+	buf[9] = 0x08;
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+		USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+	msleep(100);
+
+	if (rc < 0) {
+		printk(KERN_INFO "IR configuration failed");
+		return rc;
+	}
+	return 0;
+}
+
+static void tm6000_ir_urb_received(struct urb *urb)
+{
+	struct tm6000_core *dev = urb->context;
+	struct tm6000_IR *ir = dev->ir;
+	int rc;
+
+	if (urb->status != 0)
+		printk(KERN_INFO "not ready\n");
+	else if (urb->actual_length > 0)
+		memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
+
+	dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+	ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+
+	ir->key = 1;
+
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int default_polling_getkey(struct tm6000_IR *ir,
+				struct tm6000_ir_poll_result *poll_result)
+{
+	struct tm6000_core *dev = ir->dev;
+	int rc;
+	u8 buf[2];
+
+	if (ir->wait && !&dev->int_in) {
+		poll_result->rc_data[0] = 0xff;
+		return 0;
+	}
+
+	if (&dev->int_in) {
+		poll_result->rc_data[0] = ir->urb_data[0];
+		poll_result->rc_data[1] = ir->urb_data[1];
+	} else {
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+		msleep(10);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
+		msleep(10);
+
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+		 USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+
+		msleep(10);
+
+		dprintk("read data=%02x\n", buf[0]);
+		if (rc < 0)
+			return rc;
+
+		poll_result->rc_data[0] = buf[0];
+	}
+	return 0;
+}
+
+static void tm6000_ir_handle_key(struct tm6000_IR *ir)
+{
+	int result;
+	struct tm6000_ir_poll_result poll_result;
+
+	/* read the registers containing the IR status */
+	result = ir->get_key(ir, &poll_result);
+	if (result < 0) {
+		printk(KERN_INFO "ir->get_key() failed %d\n", result);
+		return;
+	}
+
+	dprintk("ir->get_key result data=%02x %02x\n",
+		poll_result.rc_data[0], poll_result.rc_data[1]);
+
+	if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+		ir_input_keydown(ir->input->input_dev, &ir->ir,
+			poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+
+		ir_input_nokey(ir->input->input_dev, &ir->ir);
+		ir->key = 0;
+	}
+	return;
+}
+
+static void tm6000_ir_work(struct work_struct *work)
+{
+	struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+
+	tm6000_ir_handle_key(ir);
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
+}
+
+static int tm6000_ir_start(void *priv)
+{
+	struct tm6000_IR *ir = priv;
+
+	INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
+	schedule_delayed_work(&ir->work, 0);
+
+	return 0;
+}
+
+static void tm6000_ir_stop(void *priv)
+{
+	struct tm6000_IR *ir = priv;
+
+	cancel_delayed_work_sync(&ir->work);
+}
+
+int tm6000_ir_change_protocol(void *priv, u64 ir_type)
+{
+	struct tm6000_IR *ir = priv;
+
+	ir->get_key = default_polling_getkey;
+
+	tm6000_ir_config(ir);
+	/* TODO */
+	return 0;
+}
+
+int tm6000_ir_init(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir;
+	struct ir_input_dev *ir_input_dev;
+	int err = -ENOMEM;
+	int pipe, size, rc;
+
+	if (!enable_ir)
+		return -ENODEV;
+
+	if (!dev->caps.has_remote)
+		return 0;
+
+	if (!dev->ir_codes)
+		return 0;
+
+	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+	ir_input_dev = kzalloc(sizeof(*ir_input_dev), GFP_KERNEL);
+	ir_input_dev->input_dev = input_allocate_device();
+	if (!ir || !ir_input_dev || !ir_input_dev->input_dev)
+		goto err_out_free;
+
+	/* record handles to ourself */
+	ir->dev = dev;
+	dev->ir = ir;
+
+	ir->input = ir_input_dev;
+
+	/* input einrichten */
+	ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+	ir->props.priv = ir;
+	ir->props.change_protocol = tm6000_ir_change_protocol;
+	ir->props.open = tm6000_ir_start;
+	ir->props.close = tm6000_ir_stop;
+	ir->props.driver_type = RC_DRIVER_SCANCODE;
+
+	ir->polling = 50;
+
+	snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
+						dev->name);
+
+	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+	tm6000_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
+	err = ir_input_init(ir_input_dev->input_dev, &ir->ir, IR_TYPE_OTHER);
+	if (err < 0)
+		goto err_out_free;
+
+	ir_input_dev->input_dev->name = ir->name;
+	ir_input_dev->input_dev->phys = ir->phys;
+	ir_input_dev->input_dev->id.bustype = BUS_USB;
+	ir_input_dev->input_dev->id.version = 1;
+	ir_input_dev->input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	ir_input_dev->input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+	ir_input_dev->input_dev->dev.parent = &dev->udev->dev;
+
+	if (&dev->int_in) {
+		dprintk("IR over int\n");
+
+		ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+		pipe = usb_rcvintpipe(dev->udev,
+			dev->int_in.endp->desc.bEndpointAddress
+			& USB_ENDPOINT_NUMBER_MASK);
+
+		size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+		dprintk("IR max size: %d\n", size);
+
+		ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+		if (ir->int_urb->transfer_buffer == NULL) {
+			usb_free_urb(ir->int_urb);
+			goto err_out_stop;
+		}
+		dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+		usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+			ir->int_urb->transfer_buffer, size,
+			tm6000_ir_urb_received, dev,
+			dev->int_in.endp->desc.bInterval);
+		rc = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+		if (rc) {
+			kfree(ir->int_urb->transfer_buffer);
+			usb_free_urb(ir->int_urb);
+			err = rc;
+			goto err_out_stop;
+		}
+		ir->urb_data = kzalloc(size, GFP_KERNEL);
+	}
+
+	/* ir register */
+	err = ir_input_register(ir->input->input_dev, dev->ir_codes,
+		&ir->props, "tm6000");
+	if (err)
+		goto err_out_stop;
+
+	return 0;
+
+err_out_stop:
+	dev->ir = NULL;
+err_out_free:
+	kfree(ir_input_dev);
+	kfree(ir);
+	return err;
+}
+
+int tm6000_ir_fini(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	/* skip detach on non attached board */
+
+	if (!ir)
+		return 0;
+
+	ir_input_unregister(ir->input->input_dev);
+
+	if (ir->int_urb) {
+		usb_kill_urb(ir->int_urb);
+		kfree(ir->int_urb->transfer_buffer);
+		usb_free_urb(ir->int_urb);
+		ir->int_urb = NULL;
+		kfree(ir->urb_data);
+		ir->urb_data = NULL;
+	}
+
+	kfree(ir->input);
+	ir->input = NULL;
+	kfree(ir);
+	dev->ir = NULL;
+
+	return 0;
+}
diff --git a/drivers/staging/tm6000/tm6000-stds.c b/drivers/staging/tm6000/tm6000-stds.c
index b3564f611e5..6bf4a73b320 100644
--- a/drivers/staging/tm6000/tm6000-stds.c
+++ b/drivers/staging/tm6000/tm6000-stds.c
@@ -77,7 +77,7 @@ static struct tm6000_std_tv_settings tv_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a},
@@ -135,7 +135,7 @@ static struct tm6000_std_tv_settings tv_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f},
@@ -193,7 +193,7 @@ static struct tm6000_std_tv_settings tv_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63},
@@ -251,7 +251,7 @@ static struct tm6000_std_tv_settings tv_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8},
@@ -308,7 +308,7 @@ static struct tm6000_std_tv_settings tv_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2},
@@ -354,7 +354,7 @@ static struct tm6000_std_settings composite_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a},
@@ -396,7 +396,7 @@ static struct tm6000_std_settings composite_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f},
@@ -438,7 +438,7 @@ static struct tm6000_std_settings composite_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63},
@@ -480,7 +480,7 @@ static struct tm6000_std_settings composite_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8},
@@ -521,7 +521,7 @@ static struct tm6000_std_settings composite_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2},
@@ -567,7 +567,7 @@ static struct tm6000_std_settings svideo_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a},
@@ -609,7 +609,7 @@ static struct tm6000_std_settings svideo_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f},
@@ -651,7 +651,7 @@ static struct tm6000_std_settings svideo_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x00},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63},
@@ -693,7 +693,7 @@ static struct tm6000_std_settings svideo_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92},
 			{TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8},
@@ -734,7 +734,7 @@ static struct tm6000_std_settings svideo_stds[] = {
 			{TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f},
 			{TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
 			{TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03},
-			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x00},
+			{TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30},
 			{TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b},
 			{TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
 			{TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b},
@@ -763,11 +763,11 @@ static struct tm6000_std_settings svideo_stds[] = {
 void tm6000_get_std_res(struct tm6000_core *dev)
 {
 	/* Currently, those are the only supported resoltions */
-	if (dev->norm & V4L2_STD_525_60) {
+	if (dev->norm & V4L2_STD_525_60)
 		dev->height = 480;
-	} else {
+	else
 		dev->height = 576;
-	}
+
 	dev->width = 720;
 }
 
diff --git a/drivers/staging/tm6000/tm6000-usb-isoc.h b/drivers/staging/tm6000/tm6000-usb-isoc.h
index 5a5049acd4e..138716a8f05 100644
--- a/drivers/staging/tm6000/tm6000-usb-isoc.h
+++ b/drivers/staging/tm6000/tm6000-usb-isoc.h
@@ -39,7 +39,7 @@ struct usb_isoc_ctl {
 	int				pos, size, pktsize;
 
 		/* Last field: ODD or EVEN? */
-	int				field;
+	int				vfield;
 
 		/* Stores incomplete commands */
 	u32				tmp_buf;
@@ -47,7 +47,4 @@ struct usb_isoc_ctl {
 
 		/* Stores already requested buffers */
 	struct tm6000_buffer    	*buf;
-
-		/* Stores the number of received fields */
-	int				nfields;
 };
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index f2b7fe4a358..ce0a089a077 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -48,7 +48,7 @@
 #define TM6000_MIN_BUF 4
 #define TM6000_DEF_BUF 8
 
-#define TM6000_MAX_ISO_PACKETS	40	/* Max number of ISO packets */
+#define TM6000_MAX_ISO_PACKETS	46	/* Max number of ISO packets */
 
 /* Declare static vars that will be used as parameters */
 static unsigned int vid_limit = 16;	/* Video memory limit, in Mb */
@@ -56,6 +56,7 @@ static int video_nr = -1;		/* /dev/videoN, -1 for autodetect */
 
 /* Debug level */
 int tm6000_debug;
+EXPORT_SYMBOL_GPL(tm6000_debug);
 
 /* supported controls */
 static struct v4l2_queryctrl tm6000_qctrl[] = {
@@ -149,8 +150,6 @@ static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
 
 	/* Cleans up buffer - Usefull for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
-//	if (outp)
-//		memset(outp, 0, (*buf)->vb.size);
 
 	return;
 }
@@ -186,249 +185,189 @@ const char *tm6000_msg_type[] = {
 /*
  * Identify the tm5600/6000 buffer header type and properly handles
  */
-static int copy_packet(struct urb *urb, u32 header, u8 **ptr, u8 *endp,
-			u8 *out_p, struct tm6000_buffer **buf)
-{
-	struct tm6000_dmaqueue  *dma_q = urb->context;
-	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
-	u8 c;
-	unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
-	int rc = 0;
-	/* FIXME: move to tm6000-isoc */
-	static int last_line = -2, start_line = -2, last_field = -2;
-
-	/* FIXME: this is the hardcoded window size
-	 */
-	unsigned int linewidth = (*buf)->vb.width << 1;
-
-	if (!dev->isoc_ctl.cmd) {
-		c = (header >> 24) & 0xff;
-
-		/* split the header fields */
-		size  = (((header & 0x7e) << 1) -1) *4;
-		block = (header >> 7) & 0xf;
-		field = (header >> 11) & 0x1;
-		line  = (header >> 12) & 0x1ff;
-		cmd   = (header >> 21) & 0x7;
-
-		/* Validates header fields */
-		if(size > TM6000_URB_MSG_LEN)
-			size = TM6000_URB_MSG_LEN;
-
-		if (cmd == TM6000_URB_MSG_VIDEO) {
-			if ((block+1)*TM6000_URB_MSG_LEN>linewidth)
-				cmd = TM6000_URB_MSG_ERR;
-
-			/* FIXME: Mounts the image as field0+field1
-			 * It should, instead, check if the user selected
-			 * entrelaced or non-entrelaced mode
-			 */
-			pos = ((line << 1) - field - 1) * linewidth +
-				block * TM6000_URB_MSG_LEN;
-
-			/* Don't allow to write out of the buffer */
-			if (pos+TM6000_URB_MSG_LEN > (*buf)->vb.size) {
-				dprintk(dev, V4L2_DEBUG_ISOC,
-					"ERR: size=%d, num=%d, line=%d, "
-					"field=%d\n",
-					size, block, line, field);
-
-				cmd = TM6000_URB_MSG_ERR;
-			}
-		} else {
-			pos=0;
-		}
-
-		/* Prints debug info */
-		dprintk(dev, V4L2_DEBUG_ISOC, "size=%d, num=%d, "
-				" line=%d, field=%d\n",
-				size, block, line, field);
-
-		if ((last_line!=line)&&(last_line+1!=line) &&
-		    (cmd != TM6000_URB_MSG_ERR) )  {
-			if (cmd != TM6000_URB_MSG_VIDEO)  {
-				dprintk(dev, V4L2_DEBUG_ISOC,  "cmd=%d, "
-					"size=%d, num=%d, line=%d, field=%d\n",
-					cmd, size, block, line, field);
-			}
-			if (start_line<0)
-				start_line=last_line;
-			/* Prints debug info */
-			dprintk(dev, V4L2_DEBUG_ISOC, "lines= %d-%d, "
-					"field=%d\n",
-					start_line, last_line, field);
-
-			if ((start_line<6 && last_line>200) &&
-				(last_field != field) ) {
-
-				dev->isoc_ctl.nfields++;
-				if (dev->isoc_ctl.nfields>=2) {
-					dev->isoc_ctl.nfields=0;
-
-					/* Announces that a new buffer were filled */
-					buffer_filled (dev, dma_q, *buf);
-					dprintk(dev, V4L2_DEBUG_ISOC,
-							"new buffer filled\n");
-					get_next_buf (dma_q, buf);
-					if (!*buf)
-						return rc;
-					out_p = videobuf_to_vmalloc(&((*buf)->vb));
-					if (!out_p)
-						return rc;
-
-					pos = dev->isoc_ctl.pos = 0;
-				}
-			}
-
-			start_line=line;
-			last_field=field;
-		}
-		if (cmd == TM6000_URB_MSG_VIDEO)
-			last_line = line;
-
-		pktsize = TM6000_URB_MSG_LEN;
-	} else {
-		/* Continue the last copy */
-		cmd = dev->isoc_ctl.cmd;
-		size= dev->isoc_ctl.size;
-		pos = dev->isoc_ctl.pos;
-		pktsize = dev->isoc_ctl.pktsize;
-	}
-
-	cpysize = (endp-(*ptr) > size) ? size : endp - *ptr;
-
-	if (cpysize) {
-		/* handles each different URB message */
-		switch(cmd) {
-		case TM6000_URB_MSG_VIDEO:
-			/* Fills video buffer */
-			memcpy(&out_p[pos], *ptr, cpysize);
-			break;
-		case TM6000_URB_MSG_PTS:
-			break;
-		case TM6000_URB_MSG_AUDIO:
-/* Need some code to process audio */
-printk ("%ld: cmd=%s, size=%d\n", jiffies,
-				tm6000_msg_type[cmd],size);
-			break;
-		default:
-			dprintk (dev, V4L2_DEBUG_ISOC, "cmd=%s, size=%d\n",
-						tm6000_msg_type[cmd],size);
-		}
-	}
-	if (cpysize<size) {
-		/* End of URB packet, but cmd processing is not
-		 * complete. Preserve the state for a next packet
-		 */
-		dev->isoc_ctl.pos = pos+cpysize;
-		dev->isoc_ctl.size= size-cpysize;
-		dev->isoc_ctl.cmd = cmd;
-		dev->isoc_ctl.pktsize = pktsize-cpysize;
-		(*ptr)+=cpysize;
-	} else {
-		dev->isoc_ctl.cmd = 0;
-		(*ptr)+=pktsize;
-	}
-
-	return rc;
-}
-
-static int copy_streams(u8 *data, u8 *out_p, unsigned long len,
-			struct urb *urb, struct tm6000_buffer **buf)
+static int copy_streams(u8 *data, unsigned long len,
+			struct urb *urb)
 {
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
-	u8 *ptr=data, *endp=data+len;
+	u8 *ptr=data, *endp=data+len, c;
 	unsigned long header=0;
 	int rc=0;
+	unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
+	struct tm6000_buffer *vbuf;
+	char *voutp = NULL;
+	unsigned int linewidth;
 
-	for (ptr=data; ptr<endp;) {
+	/* get video buffer */
+	get_next_buf (dma_q, &vbuf);
+	if (!vbuf)
+		return rc;
+	voutp = videobuf_to_vmalloc(&vbuf->vb);
+	if (!voutp)
+		return 0;
+
+	for (ptr = data; ptr < endp;) {
 		if (!dev->isoc_ctl.cmd) {
-			u8 *p=(u8 *)&dev->isoc_ctl.tmp_buf;
-			/* FIXME: This seems very complex
-			 * It just recovers up to 3 bytes of the header that
-			 * might be at the previous packet
-			 */
-			if (dev->isoc_ctl.tmp_buf_len) {
-				while (dev->isoc_ctl.tmp_buf_len) {
-					if ( *(ptr+3-dev->isoc_ctl.tmp_buf_len) == 0x47) {
-						break;
-					}
-					p++;
-					dev->isoc_ctl.tmp_buf_len--;
-				}
-				if (dev->isoc_ctl.tmp_buf_len) {
-					memcpy(&header, p,
-						dev->isoc_ctl.tmp_buf_len);
-					memcpy((u8 *)&header +
+			/* Header */
+			if (dev->isoc_ctl.tmp_buf_len > 0) {
+				/* from last urb or packet */
+				header = dev->isoc_ctl.tmp_buf;
+				if (4 - dev->isoc_ctl.tmp_buf_len > 0) {
+					memcpy ((u8 *)&header +
 						dev->isoc_ctl.tmp_buf_len,
 						ptr,
 						4 - dev->isoc_ctl.tmp_buf_len);
 					ptr += 4 - dev->isoc_ctl.tmp_buf_len;
-					goto HEADER;
 				}
-			}
-			/* Seek for sync */
-			for (;ptr<endp-3;ptr++) {
-				if (*(ptr+3)==0x47)
-					break;
+				dev->isoc_ctl.tmp_buf_len = 0;
+			} else {
+				if (ptr + 3 >= endp) {
+					/* have incomplete header */
+					dev->isoc_ctl.tmp_buf_len = endp - ptr;
+					memcpy (&dev->isoc_ctl.tmp_buf, ptr,
+						dev->isoc_ctl.tmp_buf_len);
+					return rc;
+				}
+				/* Seek for sync */
+				for (; ptr < endp - 3; ptr++) {
+					if (*(ptr + 3) == 0x47)
+						break;
+				}
+				/* Get message header */
+				header = *(unsigned long *)ptr;
+				ptr += 4;
 			}
 
-			if (ptr+3>=endp) {
-				dev->isoc_ctl.tmp_buf_len=endp-ptr;
-				memcpy (&dev->isoc_ctl.tmp_buf,ptr,
-					dev->isoc_ctl.tmp_buf_len);
-				dev->isoc_ctl.cmd=0;
-				return rc;
+			/* split the header fields */
+			c = (header >> 24) & 0xff;
+			size = ((header & 0x7e) << 1);
+			if (size > 0)
+				size -= 4;
+			block = (header >> 7) & 0xf;
+			field = (header >> 11) & 0x1;
+			line  = (header >> 12) & 0x1ff;
+			cmd   = (header >> 21) & 0x7;
+			/* Validates haeder fields */
+			if (size > TM6000_URB_MSG_LEN)
+				size = TM6000_URB_MSG_LEN;
+			pktsize = TM6000_URB_MSG_LEN;
+			/* calculate position in buffer
+			 * and change the buffer
+			 */
+			switch (cmd) {
+			case TM6000_URB_MSG_VIDEO:
+				if ((dev->isoc_ctl.vfield != field) &&
+					(field == 1)) {
+					/* Announces that a new buffer
+					 * were filled
+					 */
+					buffer_filled (dev, dma_q, vbuf);
+					dprintk (dev, V4L2_DEBUG_ISOC,
+							"new buffer filled\n");
+					get_next_buf (dma_q, &vbuf);
+					if (!vbuf)
+						return rc;
+					voutp = videobuf_to_vmalloc (&vbuf->vb);
+					if (!voutp)
+						return rc;
+					memset(voutp, 0, vbuf->vb.size);
+				}
+				linewidth = vbuf->vb.width << 1;
+				pos = ((line << 1) - field - 1) * linewidth +
+					block * TM6000_URB_MSG_LEN;
+				/* Don't allow to write out of the buffer */
+				if (pos + size > vbuf->vb.size)
+					cmd = TM6000_URB_MSG_ERR;
+				dev->isoc_ctl.vfield = field;
+				break;
+			case TM6000_URB_MSG_VBI:
+				break;
+			case TM6000_URB_MSG_AUDIO:
+			case TM6000_URB_MSG_PTS:
+				size = pktsize;		/* Size is always 180 bytes */
+				break;
 			}
-
-			/* Get message header */
-			header=*(unsigned long *)ptr;
-			ptr+=4;
+		} else {
+			/* Continue the last copy */
+			cmd = dev->isoc_ctl.cmd;
+			size = dev->isoc_ctl.size;
+			pos = dev->isoc_ctl.pos;
+			pktsize = dev->isoc_ctl.pktsize;
 		}
-HEADER:
-		/* Copy or continue last copy */
-		rc=copy_packet(urb,header,&ptr,endp,out_p,buf);
-		if (rc<0) {
-			buf=NULL;
-			printk(KERN_ERR "tm6000: buffer underrun at %ld\n",
-					jiffies);
-			return rc;
+		cpysize = (endp - ptr > size) ? size : endp - ptr;
+		if (cpysize) {
+			/* copy data in different buffers */
+			switch (cmd) {
+			case TM6000_URB_MSG_VIDEO:
+				/* Fills video buffer */
+				if (vbuf)
+					memcpy (&voutp[pos], ptr, cpysize);
+				break;
+			case TM6000_URB_MSG_AUDIO:
+				tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize);
+				break;
+			case TM6000_URB_MSG_VBI:
+				/* Need some code to copy vbi buffer */
+				break;
+			case TM6000_URB_MSG_PTS:
+				/* Need some code to copy pts */
+				break;
+			}
+		}
+		if (ptr + pktsize > endp) {
+			/* End of URB packet, but cmd processing is not
+			 * complete. Preserve the state for a next packet
+			 */
+			dev->isoc_ctl.pos = pos + cpysize;
+			dev->isoc_ctl.size = size - cpysize;
+			dev->isoc_ctl.cmd = cmd;
+			dev->isoc_ctl.pktsize = pktsize - (endp - ptr);
+			ptr += endp - ptr;
+		} else {
+			dev->isoc_ctl.cmd = 0;
+			ptr += pktsize;
 		}
-		if (!*buf)
-			return 0;
 	}
-
 	return 0;
 }
+
 /*
  * Identify the tm5600/6000 buffer header type and properly handles
  */
-static int copy_multiplexed(u8 *ptr, u8 *out_p, unsigned long len,
-			struct urb *urb, struct tm6000_buffer **buf)
+static int copy_multiplexed(u8 *ptr, unsigned long len,
+			struct urb *urb)
 {
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
 	unsigned int pos=dev->isoc_ctl.pos,cpysize;
 	int rc=1;
+	struct tm6000_buffer *buf;
+	char *outp = NULL;
+
+	get_next_buf(dma_q, &buf);
+	if (buf)
+		outp = videobuf_to_vmalloc(&buf->vb);
+
+	if (!outp)
+		return 0;
 
 	while (len>0) {
-		cpysize=min(len,(*buf)->vb.size-pos);
-//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
-		memcpy(&out_p[pos], ptr, cpysize);
+		cpysize=min(len,buf->vb.size-pos);
+		//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
+		memcpy(&outp[pos], ptr, cpysize);
 		pos+=cpysize;
 		ptr+=cpysize;
 		len-=cpysize;
-		if (pos >= (*buf)->vb.size) {
+		if (pos >= buf->vb.size) {
 			pos=0;
 			/* Announces that a new buffer were filled */
-			buffer_filled (dev, dma_q, *buf);
+			buffer_filled (dev, dma_q, buf);
 			dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
-			get_next_buf (dma_q, buf);
-			if (!*buf)
+			get_next_buf (dma_q, &buf);
+			if (!buf)
 				break;
-			out_p = videobuf_to_vmalloc(&((*buf)->vb));
-			if (!out_p)
+			outp = videobuf_to_vmalloc(&(buf->vb));
+			if (!outp)
 				return rc;
 			pos = 0;
 		}
@@ -486,53 +425,36 @@ static inline int tm6000_isoc_copy(struct urb *urb)
 {
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
-	struct tm6000_buffer *buf;
-	int i, len=0, rc=1;
-	int size;
-	char *outp = NULL, *p;
-	unsigned long copied;
-
-	get_next_buf(dma_q, &buf);
-	if (buf)
-		outp = videobuf_to_vmalloc(&buf->vb);
+	int i, len=0, rc=1, status;
+	char *p;
 
-	if (!outp)
-		return 0;
-
-	size = buf->vb.size;
-
-	copied=0;
-
-	if (urb->status<0) {
-		print_err_status (dev,-1,urb->status);
+	if (urb->status < 0) {
+		print_err_status (dev, -1, urb->status);
 		return 0;
 	}
 
 	for (i = 0; i < urb->number_of_packets; i++) {
-		int status = urb->iso_frame_desc[i].status;
+		status = urb->iso_frame_desc[i].status;
 
 		if (status<0) {
 			print_err_status (dev,i,status);
 			continue;
 		}
 
-		len=urb->iso_frame_desc[i].actual_length;
+		len = urb->iso_frame_desc[i].actual_length;
 
-//		if (len>=TM6000_URB_MSG_LEN) {
-			p=urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		if (len > 0) {
+			p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
 			if (!urb->iso_frame_desc[i].status) {
-				if ((buf->fmt->fourcc)==V4L2_PIX_FMT_TM6000) {
-					rc=copy_multiplexed(p, outp, len, urb, &buf);
+				if ((dev->fourcc)==V4L2_PIX_FMT_TM6000) {
+					rc=copy_multiplexed(p, len, urb);
 					if (rc<=0)
 						return rc;
 				} else {
-					copy_streams(p, outp, len, urb, &buf);
+					copy_streams(p, len, urb);
 				}
 			}
-			copied += len;
-			if (copied >= size || !buf)
-				break;
-//		}
+		}
 	}
 	return rc;
 }
@@ -577,7 +499,6 @@ static void tm6000_uninit_isoc(struct tm6000_core *dev)
 	struct urb *urb;
 	int i;
 
-	dev->isoc_ctl.nfields = -1;
 	dev->isoc_ctl.buf = NULL;
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
 		urb=dev->isoc_ctl.urb[i];
@@ -602,8 +523,6 @@ static void tm6000_uninit_isoc(struct tm6000_core *dev)
 	dev->isoc_ctl.urb=NULL;
 	dev->isoc_ctl.transfer_buffer=NULL;
 	dev->isoc_ctl.num_bufs = 0;
-
-	dev->isoc_ctl.num_bufs=0;
 }
 
 /*
@@ -612,7 +531,7 @@ static void tm6000_uninit_isoc(struct tm6000_core *dev)
 static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
 {
 	struct tm6000_dmaqueue *dma_q = &dev->vidq;
-	int i, j, sb_size, pipe, size, max_packets, num_bufs = 5;
+	int i, j, sb_size, pipe, size, max_packets, num_bufs = 8;
 	struct urb *urb;
 
 	/* De-allocates all pending stuff */
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 6812d6867d5..1ec1bff9b29 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -20,8 +20,8 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-// Use the tm6000-hack, instead of the proper initialization code
-//#define HACK 1
+/* Use the tm6000-hack, instead of the proper initialization code i*/
+/* #define HACK 1 */
 
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
@@ -98,7 +98,7 @@ enum tm6000_io_method {
 };
 
 enum tm6000_mode {
-	TM6000_MODE_UNKNOWN=0,
+	TM6000_MODE_UNKNOWN = 0,
 	TM6000_MODE_ANALOG,
 	TM6000_MODE_DIGITAL,
 };
@@ -128,10 +128,21 @@ struct tm6000_dvb {
 	struct dvb_frontend	*frontend;
 	struct dmxdev		dmxdev;
 	unsigned int		streams;
-	struct urb 		*bulk_urb;
+	struct urb		*bulk_urb;
 	struct mutex		mutex;
 };
 
+struct snd_tm6000_card {
+	struct snd_card			*card;
+	spinlock_t			reg_lock;
+	struct tm6000_core		*core;
+	struct snd_pcm_substream	*substream;
+
+	/* temporary data for buffer fill processing */
+	unsigned			buf_pos;
+	unsigned			period_pos;
+};
+
 struct tm6000_endpoint {
 	struct usb_host_endpoint	*endp;
 	__u8				bInterfaceNumber;
@@ -147,7 +158,7 @@ struct tm6000_core {
 	enum tm6000_devtype		dev_type;	/* type of device */
 
 	v4l2_std_id                     norm;           /* Current norm */
-	int				width,height;	/* Selected resolution */
+	int				width, height;	/* Selected resolution */
 
 	enum tm6000_core_state		state;
 
@@ -160,6 +171,8 @@ struct tm6000_core {
 
 	struct tm6000_gpio		gpio;
 
+	char				*ir_codes;
+
 	/* Demodulator configuration */
 	int				demod_addr;	/* demodulator address */
 
@@ -168,6 +181,10 @@ struct tm6000_core {
 	struct i2c_adapter		i2c_adap;
 	struct i2c_client		i2c_client;
 
+
+	/* extension */
+	struct list_head		devlist;
+
 	/* video for linux */
 	int				users;
 
@@ -186,6 +203,11 @@ struct tm6000_core {
 	/* DVB-T support */
 	struct tm6000_dvb		*dvb;
 
+	/* audio support */
+	struct snd_tm6000_card		*adev;
+
+	struct tm6000_IR		*ir;
+
 	/* locks */
 	struct mutex			lock;
 
@@ -193,6 +215,7 @@ struct tm6000_core {
 	struct usb_device		*udev;		/* the usb device */
 
 	struct tm6000_endpoint		bulk_in, bulk_out, isoc_in, isoc_out;
+	struct tm6000_endpoint		int_in, int_out;
 
 	/* scaler!=0 if scaler is active*/
 	int				scaler;
@@ -203,12 +226,26 @@ struct tm6000_core {
 	spinlock_t                   slock;
 };
 
+enum tm6000_ops_type {
+	TM6000_AUDIO = 0x10,
+	TM6000_DVB = 0x20,
+};
+
+struct tm6000_ops {
+	struct list_head	next;
+	char			*name;
+	enum tm6000_ops_type	type;
+	int (*init)(struct tm6000_core *);
+	int (*fini)(struct tm6000_core *);
+	int (*fillbuf)(struct tm6000_core *, char *buf, int size);
+};
+
 struct tm6000_fh {
 	struct tm6000_core           *dev;
 
 	/* video capture */
 	struct tm6000_fmt            *fmt;
-	unsigned int                 width,height;
+	unsigned int                 width, height;
 	struct videobuf_queue        vb_vidq;
 
 	enum v4l2_buf_type           type;
@@ -220,35 +257,43 @@ struct tm6000_fh {
 
 /* In tm6000-cards.c */
 
-int tm6000_tuner_callback (void *ptr, int component, int command, int arg);
-int tm6000_xc5000_callback (void *ptr, int component, int command, int arg);
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
 int tm6000_cards_setup(struct tm6000_core *dev);
 
 /* In tm6000-core.c */
 
-int tm6000_read_write_usb (struct tm6000_core *dev, u8 reqtype, u8 req,
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req,
 			   u16 value, u16 index, u8 *buf, u16 len);
-int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_init (struct tm6000_core *dev);
-
-int tm6000_init_analog_mode (struct tm6000_core *dev);
-int tm6000_init_digital_mode (struct tm6000_core *dev);
-int tm6000_set_audio_bitrate (struct tm6000_core *dev, int bitrate);
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
+int tm6000_init(struct tm6000_core *dev);
 
-int tm6000_dvb_register(struct tm6000_core *dev);
-void tm6000_dvb_unregister(struct tm6000_core *dev);
+int tm6000_init_analog_mode(struct tm6000_core *dev);
+int tm6000_init_digital_mode(struct tm6000_core *dev);
+int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
 
 int tm6000_v4l2_register(struct tm6000_core *dev);
 int tm6000_v4l2_unregister(struct tm6000_core *dev);
 int tm6000_v4l2_exit(void);
 void tm6000_set_fourcc_format(struct tm6000_core *dev);
 
+void tm6000_remove_from_devlist(struct tm6000_core *dev);
+void tm6000_add_into_devlist(struct tm6000_core *dev);
+int tm6000_register_extension(struct tm6000_ops *ops);
+void tm6000_unregister_extension(struct tm6000_ops *ops);
+void tm6000_init_extension(struct tm6000_core *dev);
+void tm6000_close_extension(struct tm6000_core *dev);
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+			char *buf, int size);
+
+
 /* In tm6000-stds.c */
 void tm6000_get_std_res(struct tm6000_core *dev);
-int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm);
+int tm6000_set_standard(struct tm6000_core *dev, v4l2_std_id *norm);
 
 /* In tm6000-i2c.c */
 int tm6000_i2c_register(struct tm6000_core *dev);
@@ -262,21 +307,25 @@ int tm6000_vidioc_streamon(struct file *file, void *priv,
 			   enum v4l2_buf_type i);
 int tm6000_vidioc_streamoff(struct file *file, void *priv,
 			    enum v4l2_buf_type i);
-int tm6000_vidioc_reqbufs (struct file *file, void *priv,
-			   struct v4l2_requestbuffers *rb);
-int tm6000_vidioc_querybuf (struct file *file, void *priv,
-			    struct v4l2_buffer *b);
-int tm6000_vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *b);
-int tm6000_vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *b);
+int tm6000_vidioc_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *rb);
+int tm6000_vidioc_querybuf(struct file *file, void *priv,
+			   struct v4l2_buffer *b);
+int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b);
+int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b);
 ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
-			 loff_t * f_pos);
+			 loff_t *f_pos);
 unsigned int tm6000_v4l2_poll(struct file *file,
 			      struct poll_table_struct *wait);
 int tm6000_queue_init(struct tm6000_core *dev);
 
 /* In tm6000-alsa.c */
-int tm6000_audio_init(struct tm6000_core *dev, int idx);
+/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
 
+/* In tm6000-input.c */
+int tm6000_ir_init(struct tm6000_core *dev);
+int tm6000_ir_fini(struct tm6000_core *dev);
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
 
 /* Debug stuff */
 
@@ -284,7 +333,7 @@ extern int tm6000_debug;
 
 #define dprintk(dev, level, fmt, arg...) do {\
 	if (tm6000_debug & level) \
-		printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, 		\
+		printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
 			 dev->name, __FUNCTION__ , ##arg); } while (0)
 
 #define V4L2_DEBUG_REG		0x0004
@@ -297,5 +346,3 @@ extern int tm6000_debug;
 #define tm6000_err(fmt, arg...) do {\
 	printk(KERN_ERR "tm6000 %s :"fmt, \
 		__FUNCTION__ , ##arg); } while (0)
-
-
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 52408164036..6a499f0eb59 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -378,47 +378,67 @@ int usbip_thread(void *param)
 	complete_and_exit(&ut->thread_done, 0);
 }
 
+static void stop_rx_thread(struct usbip_device *ud)
+{
+	if (ud->tcp_rx.thread != NULL) {
+		send_sig(SIGKILL, ud->tcp_rx.thread, 1);
+		wait_for_completion(&ud->tcp_rx.thread_done);
+		usbip_udbg("rx_thread for ud %p has finished\n", ud);
+	}
+}
+
+static void stop_tx_thread(struct usbip_device *ud)
+{
+	if (ud->tcp_tx.thread != NULL) {
+		send_sig(SIGKILL, ud->tcp_tx.thread, 1);
+		wait_for_completion(&ud->tcp_tx.thread_done);
+		usbip_udbg("tx_thread for ud %p has finished\n", ud);
+	}
+}
+
 int usbip_start_threads(struct usbip_device *ud)
 {
 	/*
 	 * threads are invoked per one device (per one connection).
 	 */
 	struct task_struct *th;
+	int err = 0;
 
 	th = kthread_run(usbip_thread, (void *)&ud->tcp_rx, "usbip");
 	if (IS_ERR(th)) {
 		printk(KERN_WARNING
 			"Unable to start control thread\n");
-		return PTR_ERR(th);
+		err = PTR_ERR(th);
+		goto ust_exit;
 	}
+
 	th = kthread_run(usbip_thread, (void *)&ud->tcp_tx, "usbip");
 	if (IS_ERR(th)) {
 		printk(KERN_WARNING
 			"Unable to start control thread\n");
-		return PTR_ERR(th);
+		err = PTR_ERR(th);
+		goto tx_thread_err;
 	}
 
 	/* confirm threads are starting */
 	wait_for_completion(&ud->tcp_rx.thread_done);
 	wait_for_completion(&ud->tcp_tx.thread_done);
+
 	return 0;
+
+tx_thread_err:
+	stop_rx_thread(ud);
+
+ust_exit:
+	return err;
 }
 EXPORT_SYMBOL_GPL(usbip_start_threads);
 
 void usbip_stop_threads(struct usbip_device *ud)
 {
 	/* kill threads related to this sdev, if v.c. exists */
-	if (ud->tcp_rx.thread != NULL) {
-		send_sig(SIGKILL, ud->tcp_rx.thread, 1);
-		wait_for_completion(&ud->tcp_rx.thread_done);
-		usbip_udbg("rx_thread for ud %p has finished\n", ud);
-	}
-
-	if (ud->tcp_tx.thread != NULL) {
-		send_sig(SIGKILL, ud->tcp_tx.thread, 1);
-		wait_for_completion(&ud->tcp_tx.thread_done);
-		usbip_udbg("tx_thread for ud %p has finished\n", ud);
-	}
+	stop_rx_thread(ud);
+	stop_tx_thread(ud);
 }
 EXPORT_SYMBOL_GPL(usbip_stop_threads);
 
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index 0c82eb47a28..0f9ea58ff71 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -523,7 +523,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 	}
 
 	if (image->bus_resource.name == NULL) {
-		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
 		if (image->bus_resource.name == NULL) {
 			dev_err(ca91cx42_bridge->parent, "Unable to allocate "
 				"memory for resource name\n");
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index abe88a380b7..f09cac16313 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -828,7 +828,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 		return 0;
 
 	if (image->bus_resource.name == NULL) {
-		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
 		if (image->bus_resource.name == NULL) {
 			dev_err(tsi148_bridge->parent, "Unable to allocate "
 				"memory for resource name\n");
diff --git a/drivers/staging/wlags49_h2/Kconfig b/drivers/staging/wlags49_h2/Kconfig
index b6fc2ca7d85..3efcbf8afed 100644
--- a/drivers/staging/wlags49_h2/Kconfig
+++ b/drivers/staging/wlags49_h2/Kconfig
@@ -1,9 +1,11 @@
 config WLAGS49_H2
 	tristate "Agere Systems HERMES II Wireless PC Card Model 0110"
-	depends on WLAN && WIRELESS_EXT && PCMCIA
+	depends on WLAN && PCMCIA
+	select WIRELESS_EXT
 	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
-	  Driver for wireless cards using Agere's HERMES II chipset
-	  which are identified with Manufacture ID: 0156,0003
-	  The software is a modified version of wl_lkm_722_abg.tar.gz
-	  from the Agere Systems website, addapted for Ubuntu 9.04.
+	Driver for wireless cards using Agere's HERMES II chipset
+	which are identified with Manufacture ID: 0156,0003
+	The software is a modified version of wl_lkm_722_abg.tar.gz
+	from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/wlags49_h2/wl_enc.c b/drivers/staging/wlags49_h2/wl_enc.c
index 48c44c8fdb2..26cf5486edd 100644
--- a/drivers/staging/wlags49_h2/wl_enc.c
+++ b/drivers/staging/wlags49_h2/wl_enc.c
@@ -62,6 +62,7 @@
 /*******************************************************************************
  *  include files
  ******************************************************************************/
+#include <linux/string.h>
 #include <wl_version.h>
 
 #include <debug.h>
diff --git a/drivers/staging/wlags49_h2/wl_sysfs.h b/drivers/staging/wlags49_h2/wl_sysfs.h
index 6d96d03cf49..fa658c38001 100644
--- a/drivers/staging/wlags49_h2/wl_sysfs.h
+++ b/drivers/staging/wlags49_h2/wl_sysfs.h
@@ -2,6 +2,6 @@
 extern void register_wlags_sysfs(struct net_device *);
 extern void unregister_wlags_sysfs(struct net_device *);
 #else
-static void register_wlags_sysfs(struct net_device *) { return; };
-static void unregister_wlags_sysfs(struct net_device *) { return; };
+static inline void register_wlags_sysfs(struct net_device *net) { }
+static inline void unregister_wlags_sysfs(struct net_device *net) { }
 #endif
diff --git a/drivers/staging/wlags49_h25/Kconfig b/drivers/staging/wlags49_h25/Kconfig
index dcc170929c1..bf5664a51cd 100644
--- a/drivers/staging/wlags49_h25/Kconfig
+++ b/drivers/staging/wlags49_h25/Kconfig
@@ -1,9 +1,11 @@
 config WLAGS49_H25
 	tristate "Linksys HERMES II.5 WCF54G_Wireless-G_CompactFlash_Card"
-	depends on WLAN && WIRELESS_EXT && PCMCIA
+	depends on WLAN && PCMCIA
+	select WIRELESS_EXT
 	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
-	  Driver for wireless cards using Agere's HERMES II.5 chipset
-	  which are identified with Manufacture ID: 0156,0004
-	  The software is a modified version of wl_lkm_722_abg.tar.gz
-	  from the Agere Systems website, addapted for Ubuntu 9.04.
+	Driver for wireless cards using Agere's HERMES II.5 chipset
+	which are identified with Manufacture ID: 0156,0004
+	The software is a modified version of wl_lkm_722_abg.tar.gz
+	from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/xgifb/Kconfig b/drivers/staging/xgifb/Kconfig
new file mode 100644
index 00000000000..bb0ca5974ea
--- /dev/null
+++ b/drivers/staging/xgifb/Kconfig
@@ -0,0 +1,11 @@
+config FB_XGI
+	tristate "XGI display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This driver supports notebooks with XGI Z7,Z9,Z11 PCI chips.
+	  Say Y if you have such a graphics card.
+	  To compile this driver as a module, choose M here: the
+	  module will be called xgifb.ko
diff --git a/drivers/staging/xgifb/Makefile b/drivers/staging/xgifb/Makefile
new file mode 100644
index 00000000000..2a317707de0
--- /dev/null
+++ b/drivers/staging/xgifb/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_FB_XGI)  += xgifb.o
+
+xgifb-objs := XGI_main_26.o XGI_accel.o vb_init.o vb_setmode.o vb_util.o vb_ext.o
+
diff --git a/drivers/staging/xgifb/TODO b/drivers/staging/xgifb/TODO
new file mode 100644
index 00000000000..7d71019b84c
--- /dev/null
+++ b/drivers/staging/xgifb/TODO
@@ -0,0 +1,15 @@
+This drivers still need a lot of work. I can list all cleanups to do but it's
+going to be long. So, I'm writing "cleanups" and not the list.
+
+Arnaud
+
+TODO:
+- clean ups
+- fix build warnings when module
+- sort out dup ids with SiS driver
+- remove useless/wrong/unused #ifdef/code/...
+- fix printk usages
+- get rid of non-linux related stuff
+
+Please send patches to:
+Arnaud Patard <apatard@mandriva.com>
diff --git a/drivers/staging/xgifb/XGI.h b/drivers/staging/xgifb/XGI.h
new file mode 100644
index 00000000000..87803dd032d
--- /dev/null
+++ b/drivers/staging/xgifb/XGI.h
@@ -0,0 +1,10 @@
+#ifndef _XGI_H
+#define _XGI_H
+
+#if 1
+#define TWDEBUG(x)
+#else
+#define TWDEBUG(x) printk(KERN_INFO x "\n");
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_accel.c b/drivers/staging/xgifb/XGI_accel.c
new file mode 100644
index 00000000000..86ec3421942
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.c
@@ -0,0 +1,596 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.c which is
+ *     Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.c which is
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *			(see http://www.winischhofer.net/
+ *			for more information and updates)
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/agp_backend.h>
+
+#include <linux/types.h>
+/*
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <linux/XGIfb.h>
+#else
+#include <video/XGIfb.h>
+#endif
+*/
+#include <asm/io.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <video/fbcon.h>
+#include <video/fbcon-cfb8.h>
+#include <video/fbcon-cfb16.h>
+#include <video/fbcon-cfb24.h>
+#include <video/fbcon-cfb32.h>
+#endif
+
+#include "osdef.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "XGIfb.h"
+#include "XGI_accel.h"
+
+
+extern struct     video_info xgi_video_info;
+extern int XGIfb_accel;
+
+static const int XGIALUConv[] =
+{
+    0x00,       /* dest = 0;            0,      GXclear,        0 */
+    0x88,       /* dest &= src;         DSa,    GXand,          0x1 */
+    0x44,       /* dest = src & ~dest;  SDna,   GXandReverse,   0x2 */
+    0xCC,       /* dest = src;          S,      GXcopy,         0x3 */
+    0x22,       /* dest &= ~src;        DSna,   GXandInverted,  0x4 */
+    0xAA,       /* dest = dest;         D,      GXnoop,         0x5 */
+    0x66,       /* dest = ^src;         DSx,    GXxor,          0x6 */
+    0xEE,       /* dest |= src;         DSo,    GXor,           0x7 */
+    0x11,       /* dest = ~src & ~dest; DSon,   GXnor,          0x8 */
+    0x99,       /* dest ^= ~src ;       DSxn,   GXequiv,        0x9 */
+    0x55,       /* dest = ~dest;        Dn,     GXInvert,       0xA */
+    0xDD,       /* dest = src|~dest ;   SDno,   GXorReverse,    0xB */
+    0x33,       /* dest = ~src;         Sn,     GXcopyInverted, 0xC */
+    0xBB,       /* dest |= ~src;        DSno,   GXorInverted,   0xD */
+    0x77,       /* dest = ~src|~dest;   DSan,   GXnand,         0xE */
+    0xFF,       /* dest = 0xFF;         1,      GXset,          0xF */
+};
+/* same ROP but with Pattern as Source */
+static const int XGIPatALUConv[] =
+{
+    0x00,       /* dest = 0;            0,      GXclear,        0 */
+    0xA0,       /* dest &= src;         DPa,    GXand,          0x1 */
+    0x50,       /* dest = src & ~dest;  PDna,   GXandReverse,   0x2 */
+    0xF0,       /* dest = src;          P,      GXcopy,         0x3 */
+    0x0A,       /* dest &= ~src;        DPna,   GXandInverted,  0x4 */
+    0xAA,       /* dest = dest;         D,      GXnoop,         0x5 */
+    0x5A,       /* dest = ^src;         DPx,    GXxor,          0x6 */
+    0xFA,       /* dest |= src;         DPo,    GXor,           0x7 */
+    0x05,       /* dest = ~src & ~dest; DPon,   GXnor,          0x8 */
+    0xA5,       /* dest ^= ~src ;       DPxn,   GXequiv,        0x9 */
+    0x55,       /* dest = ~dest;        Dn,     GXInvert,       0xA */
+    0xF5,       /* dest = src|~dest ;   PDno,   GXorReverse,    0xB */
+    0x0F,       /* dest = ~src;         Pn,     GXcopyInverted, 0xC */
+    0xAF,       /* dest |= ~src;        DPno,   GXorInverted,   0xD */
+    0x5F,       /* dest = ~src|~dest;   DPan,   GXnand,         0xE */
+    0xFF,       /* dest = 0xFF;         1,      GXset,          0xF */
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+static const unsigned char myrops[] = {
+   	3, 10, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3
+   };
+#endif
+
+/* 300 series */
+#if 0
+static void
+XGI300Sync(void)
+{
+	XGI300Idle
+}
+#endif
+static void
+XGI310Sync(void)
+{
+	XGI310Idle
+}
+#if 0
+static void
+XGI300SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+                                unsigned int planemask, int trans_color)
+{
+	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI300SetupSRCPitch(xgi_video_info.video_linelength)
+	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+
+	if(trans_color != -1) {
+		XGI300SetupROP(0x0A)
+		XGI300SetupSRCTrans(trans_color)
+		XGI300SetupCMDFlag(TRANSPARENT_BITBLT)
+	} else {
+	        XGI300SetupROP(XGIALUConv[rop])
+	}
+	if(xdir > 0) {
+		XGI300SetupCMDFlag(X_INC)
+	}
+	if(ydir > 0) {
+		XGI300SetupCMDFlag(Y_INC)
+	}
+}
+
+static void
+XGI300SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+                                int width, int height)
+{
+	long srcbase, dstbase;
+
+	srcbase = dstbase = 0;
+	if (src_y >= 2048) {
+		srcbase = xgi_video_info.video_linelength * src_y;
+		src_y = 0;
+	}
+	if (dst_y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * dst_y;
+		dst_y = 0;
+	}
+
+	XGI300SetupSRCBase(srcbase);
+	XGI300SetupDSTBase(dstbase);
+
+	if(!(xgi_video_info.CommandReg & X_INC))  {
+		src_x += width-1;
+		dst_x += width-1;
+	}
+	if(!(xgi_video_info.CommandReg & Y_INC))  {
+		src_y += height-1;
+		dst_y += height-1;
+	}
+	XGI300SetupRect(width, height)
+	XGI300SetupSRCXY(src_x, src_y)
+	XGI300SetupDSTXY(dst_x, dst_y)
+	XGI300DoCMD
+}
+
+static void
+XGI300SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+	XGI300SetupPATFG(color)
+	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI300SetupROP(XGIPatALUConv[rop])
+	XGI300SetupCMDFlag(PATFG)
+}
+
+static void
+XGI300SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+	long dstbase;
+
+	dstbase = 0;
+	if(y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * y;
+		y = 0;
+	}
+	XGI300SetupDSTBase(dstbase)
+	XGI300SetupDSTXY(x,y)
+	XGI300SetupRect(w,h)
+	XGI300SetupCMDFlag(X_INC | Y_INC | BITBLT)
+	XGI300DoCMD
+}
+#endif
+/* 310/325 series ------------------------------------------------ */
+
+static void
+XGI310SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+                                unsigned int planemask, int trans_color)
+{
+	XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI310SetupSRCPitch(xgi_video_info.video_linelength)
+	XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	if (trans_color != -1) {
+		XGI310SetupROP(0x0A)
+		XGI310SetupSRCTrans(trans_color)
+		XGI310SetupCMDFlag(TRANSPARENT_BITBLT)
+	} else {
+	        XGI310SetupROP(XGIALUConv[rop])
+		/* Set command - not needed, both 0 */
+		/* XGISetupCMDFlag(BITBLT | SRCVIDEO) */
+	}
+	XGI310SetupCMDFlag(xgi_video_info.XGI310_AccelDepth)
+	/* TW: The 310/325 series is smart enough to know the direction */
+}
+
+static void
+XGI310SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+                                int width, int height)
+{
+	long srcbase, dstbase;
+	int mymin, mymax;
+
+	srcbase = dstbase = 0;
+	mymin = min(src_y, dst_y);
+	mymax = max(src_y, dst_y);
+
+	/* Although the chip knows the direction to use
+	 * if the source and destination areas overlap,
+	 * that logic fails if we fiddle with the bitmap
+	 * addresses. Therefore, we check if the source
+	 * and destination blitting areas overlap and
+	 * adapt the bitmap addresses synchronously
+	 * if the coordinates exceed the valid range.
+	 * The the areas do not overlap, we do our
+	 * normal check.
+	 */
+	if((mymax - mymin) < height) {
+	   if((src_y >= 2048) || (dst_y >= 2048)) {
+	      srcbase = xgi_video_info.video_linelength * mymin;
+	      dstbase = xgi_video_info.video_linelength * mymin;
+	      src_y -= mymin;
+	      dst_y -= mymin;
+	   }
+	} else {
+	   if(src_y >= 2048) {
+	      srcbase = xgi_video_info.video_linelength * src_y;
+	      src_y = 0;
+	   }
+	   if(dst_y >= 2048) {
+	      dstbase = xgi_video_info.video_linelength * dst_y;
+	      dst_y = 0;
+	   }
+	}
+
+	XGI310SetupSRCBase(srcbase);
+	XGI310SetupDSTBase(dstbase);
+	XGI310SetupRect(width, height)
+	XGI310SetupSRCXY(src_x, src_y)
+	XGI310SetupDSTXY(dst_x, dst_y)
+	XGI310DoCMD
+}
+
+static void
+XGI310SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+	XGI310SetupPATFG(color)
+	XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI310SetupROP(XGIPatALUConv[rop])
+	XGI310SetupCMDFlag(PATFG | xgi_video_info.XGI310_AccelDepth)
+}
+
+static void
+XGI310SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+	long dstbase;
+
+	dstbase = 0;
+	if(y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * y;
+		y = 0;
+	}
+	XGI310SetupDSTBase(dstbase)
+	XGI310SetupDSTXY(x,y)
+	XGI310SetupRect(w,h)
+	XGI310SetupCMDFlag(BITBLT)
+	XGI310DoCMD
+}
+
+/* --------------------------------------------------------------------- */
+
+/* The exported routines */
+
+int XGIfb_initaccel(void)
+{
+#ifdef XGIFB_USE_SPINLOCKS
+    spin_lock_init(&xgi_video_info.lockaccel);
+#endif
+    return(0);
+}
+
+void XGIfb_syncaccel(void)
+{
+
+    XGI310Sync();
+
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)  /* --- KERNEL 2.5.34 and later --- */
+
+int fbcon_XGI_sync(struct fb_info *info)
+{
+    if(!XGIfb_accel) return 0;
+    CRITFLAGS
+
+    XGI310Sync();
+
+   CRITEND
+   return 0;
+}
+
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+   int col=0;
+   CRITFLAGS
+
+
+   if(!rect->width || !rect->height)
+   	return;
+
+   if(!XGIfb_accel) {
+	cfb_fillrect(info, rect);
+	return;
+   }
+
+   switch(info->var.bits_per_pixel) {
+		case 8: col = rect->color;
+			break;
+		case 16: col = ((u32 *)(info->pseudo_palette))[rect->color];
+			 break;
+		case 32: col = ((u32 *)(info->pseudo_palette))[rect->color];
+			 break;
+	}
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(col, myrops[rect->rop], 0);
+	   XGI310SubsequentSolidFillRect(rect->dx, rect->dy, rect->width, rect->height);
+	   CRITEND
+	   XGI310Sync();
+
+
+}
+
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+   int xdir, ydir;
+   CRITFLAGS
+
+
+   if(!XGIfb_accel) {
+   	cfb_copyarea(info, area);
+	return;
+   }
+
+   if(!area->width || !area->height)
+   	return;
+
+   if(area->sx < area->dx) xdir = 0;
+   else                    xdir = 1;
+   if(area->sy < area->dy) ydir = 0;
+   else                    ydir = 1;
+
+      CRITBEGIN
+      XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+      XGI310SubsequentScreenToScreenCopy(area->sx, area->sy, area->dx, area->dy, area->width, area->height);
+      CRITEND
+      XGI310Sync();
+
+}
+
+#endif
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)  /* ------ KERNEL <2.5.34 ------ */
+
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx,
+			    int dsty, int dstx, int height, int width)
+{
+        int xdir, ydir;
+	CRITFLAGS
+
+	if(!xgi_video_info.accel) {
+	    switch(xgi_video_info.video_bpp) {
+	    case 8:
+#ifdef FBCON_HAS_CFB8
+	       fbcon_cfb8_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+	    case 16:
+#ifdef FBCON_HAS_CFB16
+	       fbcon_cfb16_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+	    case 32:
+#ifdef FBCON_HAS_CFB32
+	       fbcon_cfb32_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+            }
+	    return;
+	}
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+	dstx *= fontwidth(p);
+	dsty *= fontheight(p);
+	width *= fontwidth(p);
+	height *= fontheight(p);
+
+	if(srcx < dstx) xdir = 0;
+	else            xdir = 1;
+	if(srcy < dsty) ydir = 0;
+	else            ydir = 1;
+
+
+	   CRITBEGIN
+	   XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+	   XGI310SubsequentScreenToScreenCopy(srcx, srcy, dstx, dsty, width, height);
+	   CRITEND
+	   XGI310Sync();
+#if 0
+	   printk(KERN_INFO "XGI_bmove sx %d sy %d dx %d dy %d w %d h %d\n",
+		srcx, srcy, dstx, dsty, width, height);
+#endif
+
+}
+
+
+static void fbcon_XGI_clear(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width, int color)
+{
+	CRITFLAGS
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+	width *= fontwidth(p);
+	height *= fontheight(p);
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(color, 3, 0);
+	   XGI310SubsequentSolidFillRect(srcx, srcy, width, height);
+	   CRITEND
+	   XGI310Sync();
+
+}
+
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB8
+	    fbcon_cfb8_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = attr_bgcol_ec(p, conp);
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB16
+	    fbcon_cfb16_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = ((u_int16_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB32
+	    fbcon_cfb32_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = ((u_int32_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_revc(struct display *p, int srcx, int srcy)
+{
+	CRITFLAGS
+
+	if(!xgi_video_info.accel) {
+	    switch(xgi_video_info.video_bpp) {
+	    case 16:
+#ifdef FBCON_HAS_CFB16
+	       fbcon_cfb16_revc(p, srcx, srcy);
+#endif
+	       break;
+	    case 32:
+#ifdef FBCON_HAS_CFB32
+	       fbcon_cfb32_revc(p, srcx, srcy);
+#endif
+	       break;
+            }
+	    return;
+	}
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(0, 0x0a, 0);
+	   XGI310SubsequentSolidFillRect(srcx, srcy, fontwidth(p), fontheight(p));
+	   CRITEND
+	   XGI310Sync();
+
+}
+
+#ifdef FBCON_HAS_CFB8
+struct display_switch fbcon_XGI8 = {
+	setup:			fbcon_cfb8_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear8,
+	putc:			fbcon_cfb8_putc,
+	putcs:			fbcon_cfb8_putcs,
+	revc:			fbcon_cfb8_revc,
+	clear_margins:		fbcon_cfb8_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB16
+struct display_switch fbcon_XGI16 = {
+	setup:			fbcon_cfb16_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear16,
+	putc:			fbcon_cfb16_putc,
+	putcs:			fbcon_cfb16_putcs,
+	revc:			fbcon_XGI_revc,
+	clear_margins:		fbcon_cfb16_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB32
+struct display_switch fbcon_XGI32 = {
+	setup:			fbcon_cfb32_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear32,
+	putc:			fbcon_cfb32_putc,
+	putcs:			fbcon_cfb32_putcs,
+	revc:			fbcon_XGI_revc,
+	clear_margins:		fbcon_cfb32_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+
+#endif /* KERNEL VERSION */
+
+
diff --git a/drivers/staging/xgifb/XGI_accel.h b/drivers/staging/xgifb/XGI_accel.h
new file mode 100644
index 00000000000..04e126772bb
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.h
@@ -0,0 +1,511 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.h which is
+ *     Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.h which is
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author:   Thomas Winischhofer <thomas@winischhofer.net>:
+ *			(see http://www.winischhofer.net/
+ *			for more information and updates)
+ */
+
+#ifndef _XGIFB_ACCEL_H
+#define _XGIFB_ACCEL_H
+
+/* Guard accelerator accesses with spin_lock_irqsave? Works well without. */
+#undef XGIFB_USE_SPINLOCKS
+
+#ifdef XGIFB_USE_SPINLOCKS
+#include <linux/spinlock.h>
+#define CRITBEGIN  spin_lock_irqsave(&xgi_video_info.lockaccel), critflags);
+#define CRITEND	   spin_unlock_irqrestore(&xgi_video_info.lockaccel), critflags);
+#define CRITFLAGS  unsigned long critflags;
+#else
+#define CRITBEGIN
+#define CRITEND
+#define CRITFLAGS
+#endif
+
+/* Definitions for the XGI engine communication. */
+
+#define PATREGSIZE      384  /* Pattern register size. 384 bytes @ 0x8300 */
+#define BR(x)   (0x8200 | (x) << 2)
+#define PBR(x)  (0x8300 | (x) << 2)
+
+/* XGI300 engine commands */
+#define BITBLT                  0x00000000  /* Blit */
+#define COLOREXP                0x00000001  /* Color expand */
+#define ENCOLOREXP              0x00000002  /* Enhanced color expand */
+#define MULTIPLE_SCANLINE       0x00000003  /* ? */
+#define LINE                    0x00000004  /* Draw line */
+#define TRAPAZOID_FILL          0x00000005  /* Fill trapezoid */
+#define TRANSPARENT_BITBLT      0x00000006  /* Transparent Blit */
+
+/* Additional engine commands for 310/325 */
+#define ALPHA_BLEND		0x00000007  /* Alpha blend ? */
+#define A3D_FUNCTION		0x00000008  /* 3D command ? */
+#define	CLEAR_Z_BUFFER		0x00000009  /* ? */
+#define GRADIENT_FILL		0x0000000A  /* Gradient fill */
+#define STRETCH_BITBLT		0x0000000B  /* Stretched Blit */
+
+/* source select */
+#define SRCVIDEO                0x00000000  /* source is video RAM */
+#define SRCSYSTEM               0x00000010  /* source is system memory */
+#define SRCCPUBLITBUF           SRCSYSTEM   /* source is CPU-driven BitBuffer (for color expand) */
+#define SRCAGP                  0x00000020  /* source is AGP memory (?) */
+
+/* Pattern flags */
+#define PATFG                   0x00000000  /* foreground color */
+#define PATPATREG               0x00000040  /* pattern in pattern buffer (0x8300) */
+#define PATMONO                 0x00000080  /* mono pattern */
+
+/* blitting direction (300 series only) */
+#define X_INC                   0x00010000
+#define X_DEC                   0x00000000
+#define Y_INC                   0x00020000
+#define Y_DEC                   0x00000000
+
+/* Clipping flags */
+#define NOCLIP                  0x00000000
+#define NOMERGECLIP             0x04000000
+#define CLIPENABLE              0x00040000
+#define CLIPWITHOUTMERGE        0x04040000
+
+/* Transparency */
+#define OPAQUE                  0x00000000
+#define TRANSPARENT             0x00100000
+
+/* ? */
+#define DSTAGP                  0x02000000
+#define DSTVIDEO                0x02000000
+
+/* Line */
+#define LINE_STYLE              0x00800000
+#define NO_RESET_COUNTER        0x00400000
+#define NO_LAST_PIXEL           0x00200000
+
+/* Subfunctions for Color/Enhanced Color Expansion (310/325 only) */
+#define COLOR_TO_MONO		0x00100000
+#define AA_TEXT			0x00200000
+
+/* Some general registers for 310/325 series */
+#define SRC_ADDR		0x8200
+#define SRC_PITCH		0x8204
+#define AGP_BASE		0x8206 /* color-depth dependent value */
+#define SRC_Y			0x8208
+#define SRC_X			0x820A
+#define DST_Y			0x820C
+#define DST_X			0x820E
+#define DST_ADDR		0x8210
+#define DST_PITCH		0x8214
+#define DST_HEIGHT		0x8216
+#define RECT_WIDTH		0x8218
+#define RECT_HEIGHT		0x821A
+#define PAT_FGCOLOR		0x821C
+#define PAT_BGCOLOR		0x8220
+#define SRC_FGCOLOR		0x8224
+#define SRC_BGCOLOR		0x8228
+#define MONO_MASK		0x822C
+#define LEFT_CLIP		0x8234
+#define TOP_CLIP		0x8236
+#define RIGHT_CLIP		0x8238
+#define BOTTOM_CLIP		0x823A
+#define COMMAND_READY		0x823C
+#define FIRE_TRIGGER      	0x8240
+
+#define PATTERN_REG		0x8300  /* 384 bytes pattern buffer */
+
+/* Line registers */
+#define LINE_X0			SRC_Y
+#define LINE_X1			DST_Y
+#define LINE_Y0			SRC_X
+#define LINE_Y1			DST_X
+#define LINE_COUNT		RECT_WIDTH
+#define LINE_STYLE_PERIOD	RECT_HEIGHT
+#define LINE_STYLE_0		MONO_MASK
+#define LINE_STYLE_1		0x8230
+#define LINE_XN			PATTERN_REG
+#define LINE_YN			PATTERN_REG+2
+
+/* Transparent bitblit registers */
+#define TRANS_DST_KEY_HIGH	PAT_FGCOLOR
+#define TRANS_DST_KEY_LOW	PAT_BGCOLOR
+#define TRANS_SRC_KEY_HIGH	SRC_FGCOLOR
+#define TRANS_SRC_KEY_LOW	SRC_BGCOLOR
+
+/* Queue */
+#define Q_BASE_ADDR		0x85C0  /* Base address of software queue (?) */
+#define Q_WRITE_PTR		0x85C4  /* Current write pointer (?) */
+#define Q_READ_PTR		0x85C8  /* Current read pointer (?) */
+#define Q_STATUS		0x85CC  /* queue status */
+
+
+#define MMIO_IN8(base, offset) \
+	*(volatile u8 *)(((u8*)(base)) + (offset))
+#define MMIO_IN16(base, offset) \
+	*(volatile u16 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_IN32(base, offset) \
+	*(volatile u32 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_OUT8(base, offset, val) \
+	*(volatile u8 *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT16(base, offset, val) \
+	*(volatile u16 *)(void *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT32(base, offset, val) \
+	*(volatile u32 *)(void *)(((u8*)(base)) + (offset)) = (val)
+
+
+
+/* ------------- XGI 300 series -------------- */
+
+/* Macros to do useful things with the XGI BitBLT engine */
+
+/* BR(16) (0x8420):
+
+   bit 31 2D engine: 1 is idle,
+   bit 30 3D engine: 1 is idle,
+   bit 29 Command queue: 1 is empty
+
+   bits 28:24: Current CPU driven BitBlt buffer stage bit[4:0]
+
+   bits 15:0:  Current command queue length
+
+*/
+
+/* TW: BR(16)+2 = 0x8242 */
+
+int     xgiCmdQueLen;
+
+#define XGI300Idle \
+  { \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, 0x8240); \
+  }
+/* TW: (do three times, because 2D engine seems quite unsure about whether or not it's idle) */
+
+#define XGI300SetupSRCBase(base) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(0), base);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCPitch(pitch) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1), pitch);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCXY(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (x)<<16 | (y) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTBase(base) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(4), base);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTXY(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (x)<<16 | (y) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTRect(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(5), (y)<<16 | (x) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTColorDepth(bpp) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1)+2, bpp);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupRect(w,h) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(6), (h)<<16 | (w) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupPATFG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(7), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupPATBG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(8), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCFG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(9), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCBG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(10), color);\
+                xgiCmdQueLen --;
+
+/* 0x8224 src colorkey high */
+/* 0x8228 src colorkey low */
+/* 0x821c dest colorkey high */
+/* 0x8220 dest colorkey low */
+#define XGI300SetupSRCTrans(color) \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8224, color);\
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8228, color);\
+		xgiCmdQueLen -= 2;
+
+#define XGI300SetupDSTTrans(color) \
+		if (xgiCmdQueLen <= 1)  XGI300Idle;\
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x821C, color); \
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8220, color); \
+                xgiCmdQueLen -= 2;
+
+#define XGI300SetupMONOPAT(p0,p1) \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), p0);\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), p1);\
+                xgiCmdQueLen -= 2;
+
+#define XGI300SetupClipLT(left,top) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(13), ((left) & 0xFFFF) | (top)<<16 );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupClipRB(right,bottom) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(14), ((right) & 0xFFFF) | (bottom)<<16 );\
+                xgiCmdQueLen--;
+
+/* General */
+#define XGI300SetupROP(rop) \
+                xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI300SetupCMDFlag(flags) \
+                xgi_video_info.CommandReg |= (flags);
+
+#define XGI300DoCMD \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(15), xgi_video_info.CommandReg); \
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(16), 0);\
+                xgiCmdQueLen -= 2;
+
+/* Line */
+#define XGI300SetupX0Y0(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (y)<<16 | (x) );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupX1Y1(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (y)<<16 | (x) );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupLineCount(c) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6), c);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStylePeriod(p) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6)+2, p);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStyleLow(ls) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), ls);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStyleHigh(ls) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), ls);\
+                xgiCmdQueLen--;
+
+
+
+/* ----------- XGI 310/325 series --------------- */
+
+/* Q_STATUS:
+   bit 31 = 1: All engines idle and all queues empty
+   bit 30 = 1: Hardware Queue (=HW CQ, 2D queue, 3D queue) empty
+   bit 29 = 1: 2D engine is idle
+   bit 28 = 1: 3D engine is idle
+   bit 27 = 1: HW command queue empty
+   bit 26 = 1: 2D queue empty
+   bit 25 = 1: 3D queue empty
+   bit 24 = 1: SW command queue empty
+   bits 23:16: 2D counter 3
+   bits 15:8:  2D counter 2
+   bits 7:0:   2D counter 1
+
+   Where is the command queue length (current amount of commands the queue
+   can accept) on the 310/325 series? (The current implementation is taken
+   from 300 series and certainly wrong...)
+*/
+
+/* TW: FIXME: xgiCmdQueLen is... where....? */
+#define XGI310Idle \
+  { \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+  xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS); \
+  }
+
+#define XGI310SetupSRCBase(base) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_ADDR, base);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCPitch(pitch) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, SRC_PITCH, pitch);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCXY(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_Y, (x)<<16 | (y) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTBase(base) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_ADDR, base);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTXY(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_Y, (x)<<16 | (y) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTRect(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_PITCH, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTColorDepth(bpp) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, AGP_BASE, bpp);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupRect(w,h) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, RECT_WIDTH, (h)<<16 | (w) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupPATFG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_FGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupPATBG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_BGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCFG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_FGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCBG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_BGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCTrans(color) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_HIGH, color);\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_LOW, color);\
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupDSTTrans(color) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_HIGH, color); \
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_LOW, color); \
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupMONOPAT(p0,p1) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK, p0);\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK+4, p1);\
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupClipLT(left,top) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LEFT_CLIP, ((left) & 0xFFFF) | (top)<<16 );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupClipRB(right,bottom) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, RIGHT_CLIP, ((right) & 0xFFFF) | (bottom)<<16 );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupROP(rop) \
+      xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI310SetupCMDFlag(flags) \
+      xgi_video_info.CommandReg |= (flags);
+
+#define XGI310DoCMD \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, COMMAND_READY, xgi_video_info.CommandReg); \
+      MMIO_OUT32(xgi_video_info.mmio_vbase, FIRE_TRIGGER, 0); \
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupX0Y0(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X0, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupX1Y1(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X1, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupLineCount(c) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_COUNT, c);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStylePeriod(p) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_STYLE_PERIOD, p);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStyleLow(ls) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_0, ls);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStyleHigh(ls) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_1, ls);\
+      xgiCmdQueLen--;
+
+int  XGIfb_initaccel(void);
+void XGIfb_syncaccel(void);
+
+extern struct video_info xgi_video_info;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx, int dsty,
+                     int dstx, int height, int width);
+void fbcon_XGI_revc(struct display *p, int srcy, int srcx);
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p, int srcy,
+                      int srcx, int height, int width);
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p, int srcy,
+                       int srcx, int height, int width);
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p, int srcy,
+                       int srcx, int height, int width);
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+extern int XGIfb_accel;
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
new file mode 100644
index 00000000000..4f4171e8a68
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -0,0 +1,1023 @@
+#ifndef _XGIFB_MAIN
+#define _XGIFB_MAIN
+
+
+/* ------------------- Constant Definitions ------------------------- */
+
+
+#include "XGIfb.h"
+#include "vb_struct.h"
+#include "vb_def.h"
+
+//#define LINUXBIOS   /* turn this on when compiling for LINUXBIOS */
+#define AGPOFF     /* default is turn off AGP */
+
+#define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while(0)
+
+#define VER_MAJOR                 0
+#define VER_MINOR                 8
+#define VER_LEVEL                 1
+
+#define DRIVER_DESC  "XGI Volari Frame Buffer Module Version 0.8.1"
+
+#ifndef PCI_VENDOR_ID_XG
+#define PCI_VENDOR_ID_XG          0x18CA
+#endif
+
+#ifndef PCI_DEVICE_ID_XG_40
+#define PCI_DEVICE_ID_XG_40      0x040
+#endif
+#ifndef PCI_DEVICE_ID_XG_41
+#define PCI_DEVICE_ID_XG_41      0x041
+#endif
+#ifndef PCI_DEVICE_ID_XG_42
+#define PCI_DEVICE_ID_XG_42      0x042
+#endif
+#ifndef PCI_DEVICE_ID_XG_20
+#define PCI_DEVICE_ID_XG_20      0x020
+#endif
+#ifndef PCI_DEVICE_ID_XG_27
+#define PCI_DEVICE_ID_XG_27      0x027
+#endif
+
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#define XGI_IOTYPE1 void __iomem
+#define XGI_IOTYPE2 __iomem
+#define XGIINITSTATIC static
+#else
+#define XGI_IOTYPE1 unsigned char
+#define XGI_IOTYPE2
+#define XGIINITSTATIC
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct pci_device_id __devinitdata xgifb_pci_table[] = {
+
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_27, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_40, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
+#endif
+/* To be included in fb.h */
+#ifndef FB_ACCEL_XGI_GLAMOUR_2
+#define FB_ACCEL_XGI_GLAMOUR_2  40	/* XGI 315, 650, 740		*/
+#endif
+#ifndef FB_ACCEL_XGI_XABRE
+#define FB_ACCEL_XGI_XABRE      41	/* XGI 330 ("Xabre")		*/
+#endif
+
+#define MAX_ROM_SCAN              0x10000
+
+#define HW_CURSOR_CAP             0x80
+#define TURBO_QUEUE_CAP           0x40
+#define AGP_CMD_QUEUE_CAP         0x20
+#define VM_CMD_QUEUE_CAP          0x10
+#define MMIO_CMD_QUEUE_CAP        0x08
+
+
+
+/* For 315 series */
+
+#define COMMAND_QUEUE_AREA_SIZE   0x80000 /* 512K */
+#define COMMAND_QUEUE_THRESHOLD   0x1F
+
+
+/* TW */
+#define HW_CURSOR_AREA_SIZE_315   0x4000  /* 16K */
+#define HW_CURSOR_AREA_SIZE_300   0x1000  /* 4K */
+
+#define OH_ALLOC_SIZE             4000
+#define SENTINEL                  0x7fffffff
+
+#define SEQ_ADR                   0x14
+#define SEQ_DATA                  0x15
+#define DAC_ADR                   0x18
+#define DAC_DATA                  0x19
+#define CRTC_ADR                  0x24
+#define CRTC_DATA                 0x25
+#define DAC2_ADR                  (0x16-0x30)
+#define DAC2_DATA                 (0x17-0x30)
+#define VB_PART1_ADR              (0x04-0x30)
+#define VB_PART1_DATA             (0x05-0x30)
+#define VB_PART2_ADR              (0x10-0x30)
+#define VB_PART2_DATA             (0x11-0x30)
+#define VB_PART3_ADR              (0x12-0x30)
+#define VB_PART3_DATA             (0x13-0x30)
+#define VB_PART4_ADR              (0x14-0x30)
+#define VB_PART4_DATA             (0x15-0x30)
+
+#define XGISR			  XGI_Pr.P3c4
+#define XGICR                     XGI_Pr.P3d4
+#define XGIDACA                   XGI_Pr.P3c8
+#define XGIDACD                   XGI_Pr.P3c9
+#define XGIPART1                  XGI_Pr.Part1Port
+#define XGIPART2                  XGI_Pr.Part2Port
+#define XGIPART3                  XGI_Pr.Part3Port
+#define XGIPART4                  XGI_Pr.Part4Port
+#define XGIPART5                  XGI_Pr.Part5Port
+#define XGIDAC2A                  XGIPART5
+#define XGIDAC2D                  (XGIPART5 + 1)
+#define XGIMISCR                  (XGI_Pr.RelIO + 0x1c)
+#define XGIINPSTAT		  (XGI_Pr.RelIO + 0x2a)
+
+#define IND_XGI_PASSWORD          0x05  /* SRs */
+#define IND_XGI_COLOR_MODE        0x06
+#define IND_XGI_RAMDAC_CONTROL    0x07
+#define IND_XGI_DRAM_SIZE         0x14
+#define IND_XGI_SCRATCH_REG_16    0x16
+#define IND_XGI_SCRATCH_REG_17    0x17
+#define IND_XGI_SCRATCH_REG_1A    0x1A
+#define IND_XGI_MODULE_ENABLE     0x1E
+#define IND_XGI_PCI_ADDRESS_SET   0x20
+#define IND_XGI_TURBOQUEUE_ADR    0x26
+#define IND_XGI_TURBOQUEUE_SET    0x27
+#define IND_XGI_POWER_ON_TRAP     0x38
+#define IND_XGI_POWER_ON_TRAP2    0x39
+#define IND_XGI_CMDQUEUE_SET      0x26
+#define IND_XGI_CMDQUEUE_THRESHOLD  0x27
+
+#define IND_XGI_SCRATCH_REG_CR30  0x30  /* CRs */
+#define IND_XGI_SCRATCH_REG_CR31  0x31
+#define IND_XGI_SCRATCH_REG_CR32  0x32
+#define IND_XGI_SCRATCH_REG_CR33  0x33
+#define IND_XGI_LCD_PANEL         0x36
+#define IND_XGI_SCRATCH_REG_CR37  0x37
+#define IND_XGI_AGP_IO_PAD        0x48
+
+#define IND_BRI_DRAM_STATUS       0x63 /* PCI config memory size offset */
+
+#define MMIO_QUEUE_PHYBASE        0x85C0
+#define MMIO_QUEUE_WRITEPORT      0x85C4
+#define MMIO_QUEUE_READPORT       0x85C8
+
+#define IND_XGI_CRT2_WRITE_ENABLE_300 0x24
+#define IND_XGI_CRT2_WRITE_ENABLE_315 0x2F
+
+#define XGI_PASSWORD              0x86  /* SR05 */
+#define XGI_INTERLACED_MODE       0x20  /* SR06 */
+#define XGI_8BPP_COLOR_MODE       0x0
+#define XGI_15BPP_COLOR_MODE      0x1
+#define XGI_16BPP_COLOR_MODE      0x2
+#define XGI_32BPP_COLOR_MODE      0x4
+
+#define XGI_DRAM_SIZE_MASK     0xF0  /*SR14 */
+#define XGI_DRAM_SIZE_1MB      0x00
+#define XGI_DRAM_SIZE_2MB      0x01
+#define XGI_DRAM_SIZE_4MB      0x02
+#define XGI_DRAM_SIZE_8MB      0x03
+#define XGI_DRAM_SIZE_16MB     0x04
+#define XGI_DRAM_SIZE_32MB     0x05
+#define XGI_DRAM_SIZE_64MB     0x06
+#define XGI_DRAM_SIZE_128MB    0x07
+#define XGI_DRAM_SIZE_256MB    0x08
+#define XGI_DATA_BUS_MASK      0x02
+#define XGI_DATA_BUS_64        0x00
+#define XGI_DATA_BUS_128       0x01
+#define XGI_DUAL_CHANNEL_MASK  0x0C
+#define XGI_SINGLE_CHANNEL_1_RANK  	0x0
+#define XGI_SINGLE_CHANNEL_2_RANK  	0x1
+#define XGI_ASYM_DDR		  	0x02
+#define XGI_DUAL_CHANNEL_1_RANK    	0x3
+
+#define XGI550_DRAM_SIZE_MASK     0x3F  /* 550/650/740 SR14 */
+#define XGI550_DRAM_SIZE_4MB      0x00
+#define XGI550_DRAM_SIZE_8MB      0x01
+#define XGI550_DRAM_SIZE_16MB     0x03
+#define XGI550_DRAM_SIZE_24MB     0x05
+#define XGI550_DRAM_SIZE_32MB     0x07
+#define XGI550_DRAM_SIZE_64MB     0x0F
+#define XGI550_DRAM_SIZE_96MB     0x17
+#define XGI550_DRAM_SIZE_128MB    0x1F
+#define XGI550_DRAM_SIZE_256MB    0x3F
+
+#define XGI_SCRATCH_REG_1A_MASK   0x10
+
+#define XGI_ENABLE_2D             0x40  /* SR1E */
+
+#define XGI_MEM_MAP_IO_ENABLE     0x01  /* SR20 */
+#define XGI_PCI_ADDR_ENABLE       0x80
+
+#define XGI_AGP_CMDQUEUE_ENABLE   0x80  /* 315/650/740 SR26 */
+#define XGI_VRAM_CMDQUEUE_ENABLE  0x40
+#define XGI_MMIO_CMD_ENABLE       0x20
+#define XGI_CMD_QUEUE_SIZE_512k   0x00
+#define XGI_CMD_QUEUE_SIZE_1M     0x04
+#define XGI_CMD_QUEUE_SIZE_2M     0x08
+#define XGI_CMD_QUEUE_SIZE_4M     0x0C
+#define XGI_CMD_QUEUE_RESET       0x01
+#define XGI_CMD_AUTO_CORR	  0x02
+
+#define XGI_SIMULTANEOUS_VIEW_ENABLE  0x01  /* CR30 */
+#define XGI_MODE_SELECT_CRT2      0x02
+#define XGI_VB_OUTPUT_COMPOSITE   0x04
+#define XGI_VB_OUTPUT_SVIDEO      0x08
+#define XGI_VB_OUTPUT_SCART       0x10
+#define XGI_VB_OUTPUT_LCD         0x20
+#define XGI_VB_OUTPUT_CRT2        0x40
+#define XGI_VB_OUTPUT_HIVISION    0x80
+
+#define XGI_VB_OUTPUT_DISABLE     0x20  /* CR31 */
+#define XGI_DRIVER_MODE           0x40
+
+#define XGI_VB_COMPOSITE          0x01  /* CR32 */
+#define XGI_VB_SVIDEO             0x02
+#define XGI_VB_SCART              0x04
+#define XGI_VB_LCD                0x08
+#define XGI_VB_CRT2               0x10
+#define XGI_CRT1                  0x20
+#define XGI_VB_HIVISION           0x40
+#define XGI_VB_YPBPR                0x80
+#define XGI_VB_TV                 (XGI_VB_COMPOSITE | XGI_VB_SVIDEO | \
+                                   XGI_VB_SCART | XGI_VB_HIVISION|XGI_VB_YPBPR)
+
+#define XGI_EXTERNAL_CHIP_MASK    	   0x0E  /* CR37 */
+#define XGI_EXTERNAL_CHIP_XGI301           0x01  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS             0x02  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_TRUMPION         0x03  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS_CHRONTEL    0x04  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_CHRONTEL         0x05  /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS          0x02  /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL 0x03  /* in CR37 << 1 ! */
+
+#define XGI_AGP_2X                0x20  /* CR48 */
+
+#define BRI_DRAM_SIZE_MASK        0x70  /* PCI bridge config data */
+#define BRI_DRAM_SIZE_2MB         0x00
+#define BRI_DRAM_SIZE_4MB         0x01
+#define BRI_DRAM_SIZE_8MB         0x02
+#define BRI_DRAM_SIZE_16MB        0x03
+#define BRI_DRAM_SIZE_32MB        0x04
+#define BRI_DRAM_SIZE_64MB        0x05
+
+#define HW_DEVICE_EXTENSION	  XGI_HW_DEVICE_INFO
+#define PHW_DEVICE_EXTENSION      PXGI_HW_DEVICE_INFO
+
+#define SR_BUFFER_SIZE            5
+#define CR_BUFFER_SIZE            5
+
+/* Useful macros */
+#define inXGIREG(base)          inb(base)
+#define outXGIREG(base,val)     outb(val,base)
+#define orXGIREG(base,val)      do { \
+                                  unsigned char __Temp = inb(base); \
+                                  outXGIREG(base, __Temp | (val)); \
+                                } while (0)
+#define andXGIREG(base,val)     do { \
+                                  unsigned char __Temp = inb(base); \
+                                  outXGIREG(base, __Temp & (val)); \
+                                } while (0)
+#define inXGIIDXREG(base,idx,var)   do { \
+                                      outb(idx,base); var=inb((base)+1); \
+                                    } while (0)
+#define outXGIIDXREG(base,idx,val)  do { \
+                                      outb(idx,base); outb((val),(base)+1); \
+                                    } while (0)
+#define orXGIIDXREG(base,idx,val)   do { \
+                                      unsigned char __Temp; \
+                                      outb(idx,base);   \
+                                      __Temp = inb((base)+1)|(val); \
+                                      outXGIIDXREG(base,idx,__Temp); \
+                                    } while (0)
+#define andXGIIDXREG(base,idx,and)  do { \
+                                      unsigned char __Temp; \
+                                      outb(idx,base);   \
+                                      __Temp = inb((base)+1)&(and); \
+                                      outXGIIDXREG(base,idx,__Temp); \
+                                    } while (0)
+#define setXGIIDXREG(base,idx,and,or)   do { \
+                                          unsigned char __Temp; \
+                                          outb(idx,base);   \
+                                          __Temp = (inb((base)+1)&(and))|(or); \
+                                          outXGIIDXREG(base,idx,__Temp); \
+                                        } while (0)
+
+/* ------------------- Global Variables ----------------------------- */
+
+/* Fbcon variables */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_info* fb_info;
+#else
+static struct fb_info XGI_fb_info;
+#endif
+
+
+static int    video_type = FB_TYPE_PACKED_PIXELS;
+
+static struct fb_var_screeninfo default_var = {
+	.xres		= 0,
+	.yres		= 0,
+	.xres_virtual	= 0,
+	.yres_virtual	= 0,
+	.xoffset	= 0,
+	.yoffset	= 0,
+	.bits_per_pixel	= 0,
+	.grayscale	= 0,
+	.red		= {0, 8, 0},
+	.green		= {0, 8, 0},
+	.blue		= {0, 8, 0},
+	.transp		= {0, 0, 0},
+	.nonstd		= 0,
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.accel_flags	= 0,
+	.pixclock	= 0,
+	.left_margin	= 0,
+	.right_margin	= 0,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.hsync_len	= 0,
+	.vsync_len	= 0,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	.reserved	= {0, 0, 0, 0, 0, 0}
+#endif
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_fix_screeninfo XGIfb_fix = {
+	.id		= "XGI",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.xpanstep	= 1,
+	.ypanstep	= 1,
+};
+static char myid[20];
+static u32 pseudo_palette[17];
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static struct display XGI_disp;
+
+static struct display_switch XGIfb_sw;
+
+static struct {
+	u16 blue, green, red, pad;
+} XGI_palette[256];
+
+static union {
+#ifdef FBCON_HAS_CFB16
+	u16 cfb16[16];
+#endif
+#ifdef FBCON_HAS_CFB32
+	u32 cfb32[16];
+#endif
+} XGI_fbcon_cmap;
+
+static int XGIfb_inverse = 0;
+#endif
+
+/* display status */
+static int XGIfb_off = 0;
+static int XGIfb_crt1off = 0;
+static int XGIfb_forcecrt1 = -1;
+static int XGIvga_enabled = 0;
+static int XGIfb_userom = 0;
+//static int XGIfb_useoem = -1;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static int currcon = 0;
+#endif
+
+/* global flags */
+static int XGIfb_registered;
+static int XGIfb_tvmode = 0;
+static int XGIfb_mem = 0;
+static int XGIfb_pdc = 0;
+static int enable_dstn = 0;
+static int XGIfb_ypan = -1;
+
+
+int 	   XGIfb_accel = 0;
+
+
+static int XGIfb_hwcursor_size = 0;
+static int XGIfb_CRT2_write_enable = 0;
+
+int XGIfb_crt2type  = -1;	/* TW: CRT2 type (for overriding autodetection) */
+int XGIfb_tvplug    = -1;	/* PR: Tv plug type (for overriding autodetection) */
+
+int XGIfb_queuemode = -1; 	/* TW: Use MMIO queue mode by default (310/325 series only) */
+
+unsigned char XGIfb_detectedpdc = 0;
+
+unsigned char XGIfb_detectedlcda = 0xff;
+
+
+
+
+/* TW: For ioctl XGIFB_GET_INFO */
+/* XGIfb_info XGIfbinfo; */
+
+/* TW: Hardware extension; contains data on hardware */
+HW_DEVICE_EXTENSION XGIhw_ext;
+
+/* TW: XGI private structure */
+VB_DEVICE_INFO  XGI_Pr;
+
+/* card parameters */
+static unsigned long XGIfb_mmio_size = 0;
+static u8            XGIfb_caps = 0;
+
+typedef enum _XGI_CMDTYPE {
+	MMIO_CMD = 0,
+	AGP_CMD_QUEUE,
+	VM_CMD_QUEUE,
+} XGI_CMDTYPE;
+
+#define MD_XGI300 1
+#define MD_XGI315 2
+
+/* mode table */
+/* NOT const - will be patched for 1280x960 mode number chaos reasons */
+struct _XGIbios_mode {
+	char name[15];
+	u8 mode_no;
+	u16 vesa_mode_no_1;  /* "XGI defined" VESA mode number */
+	u16 vesa_mode_no_2;  /* Real VESA mode numbers */
+	u16 xres;
+	u16 yres;
+	u16 bpp;
+	u16 rate_idx;
+	u16 cols;
+	u16 rows;
+	u8  chipset;
+} XGIbios_mode[] = {
+#define MODE_INDEX_NONE           0  /* TW: index for mode=none */
+	{"none",         0xFF, 0x0000, 0x0000,    0,    0,  0, 0,   0,  0, MD_XGI300|MD_XGI315},  /* TW: for mode "none" */
+	{"320x240x16",   0x56, 0x0000, 0x0000,  320,  240, 16, 1,  40, 15,           MD_XGI315},
+	{"320x480x8",    0x5A, 0x0000, 0x0000,  320,  480,  8, 1,  40, 30,           MD_XGI315},  /* TW: FSTN */
+	{"320x480x16",   0x5B, 0x0000, 0x0000,  320,  480, 16, 1,  40, 30,           MD_XGI315},  /* TW: FSTN */
+	{"640x480x8",    0x2E, 0x0101, 0x0101,  640,  480,  8, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"640x480x16",   0x44, 0x0111, 0x0111,  640,  480, 16, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"640x480x24",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30, MD_XGI300|MD_XGI315},  /* TW: That's for people who mix up color- and fb depth */
+	{"640x480x32",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"720x480x8",    0x31, 0x0000, 0x0000,  720,  480,  8, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x16",   0x33, 0x0000, 0x0000,  720,  480, 16, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x24",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x32",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x576x8",    0x32, 0x0000, 0x0000,  720,  576,  8, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x16",   0x34, 0x0000, 0x0000,  720,  576, 16, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x24",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x32",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"800x480x8",    0x70, 0x0000, 0x0000,  800,  480,  8, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x16",   0x7a, 0x0000, 0x0000,  800,  480, 16, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x24",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x32",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+#define DEFAULT_MODE              21 /* TW: index for 800x600x8 */
+#define DEFAULT_LCDMODE           21 /* TW: index for 800x600x8 */
+#define DEFAULT_TVMODE            21 /* TW: index for 800x600x8 */
+	{"800x600x8",    0x30, 0x0103, 0x0103,  800,  600,  8, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x16",   0x47, 0x0114, 0x0114,  800,  600, 16, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x24",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x32",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"1024x576x8",   0x71, 0x0000, 0x0000, 1024,  576,  8, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x16",  0x74, 0x0000, 0x0000, 1024,  576, 16, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x24",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x32",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x600x8",   0x20, 0x0000, 0x0000, 1024,  600,  8, 1, 128, 37, MD_XGI300          },  /* TW: 300 series only */
+	{"1024x600x16",  0x21, 0x0000, 0x0000, 1024,  600, 16, 1, 128, 37, MD_XGI300          },
+	{"1024x600x24",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37, MD_XGI300          },
+	{"1024x600x32",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37, MD_XGI300          },
+	{"1024x768x8",   0x38, 0x0105, 0x0105, 1024,  768,  8, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x16",  0x4A, 0x0117, 0x0117, 1024,  768, 16, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x24",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x32",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1152x768x8",   0x23, 0x0000, 0x0000, 1152,  768,  8, 1, 144, 48, MD_XGI300          },  /* TW: 300 series only */
+	{"1152x768x16",  0x24, 0x0000, 0x0000, 1152,  768, 16, 1, 144, 48, MD_XGI300          },
+	{"1152x768x24",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48, MD_XGI300          },
+	{"1152x768x32",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48, MD_XGI300          },
+	{"1280x720x8",   0x79, 0x0000, 0x0000, 1280,  720,  8, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x16",  0x75, 0x0000, 0x0000, 1280,  720, 16, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x24",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x32",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x768x8",   0x23, 0x0000, 0x0000, 1280,  768,  8, 1, 160, 48,           MD_XGI315},  /* TW: 310/325 series only */
+	{"1280x768x16",  0x24, 0x0000, 0x0000, 1280,  768, 16, 1, 160, 48,           MD_XGI315},
+	{"1280x768x24",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,           MD_XGI315},
+	{"1280x768x32",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,           MD_XGI315},
+#define MODEINDEX_1280x960 48
+	{"1280x960x8",   0x7C, 0x0000, 0x0000, 1280,  960,  8, 1, 160, 60, MD_XGI300|MD_XGI315},  /* TW: Modenumbers being patched */
+	{"1280x960x16",  0x7D, 0x0000, 0x0000, 1280,  960, 16, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x960x24",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x960x32",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x1024x8",  0x3A, 0x0107, 0x0107, 1280, 1024,  8, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1400x1050x8",  0x26, 0x0000, 0x0000, 1400, 1050,  8, 1, 175, 65,           MD_XGI315},  /* TW: 310/325 series only */
+	{"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65,           MD_XGI315},
+	{"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,           MD_XGI315},
+	{"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,           MD_XGI315},
+	{"1600x1200x8",  0x3C, 0x0130, 0x011c, 1600, 1200,  8, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x8",  0x68, 0x013f, 0x0000, 1920, 1440,  8, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"2048x1536x8",  0x6c, 0x0000, 0x0000, 2048, 1536,  8, 1, 256, 96,           MD_XGI315},  /* TW: 310/325 series only */
+	{"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96,           MD_XGI315},
+	{"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,           MD_XGI315},
+	{"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,           MD_XGI315},
+	{"\0", 0x00, 0, 0, 0, 0, 0, 0, 0}
+};
+
+/* mode-related variables */
+#ifdef MODULE
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = 1;
+#else
+static int XGIfb_mode_idx = MODE_INDEX_NONE;  /* Don't use a mode by default if we are a module */
+#endif
+#else
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = -1;               /* Use a default mode if we are inside the kernel */
+#else
+static int XGIfb_mode_idx = -1;
+#endif
+#endif
+u8  XGIfb_mode_no  = 0;
+u8  XGIfb_rate_idx = 0;
+
+/* TW: CR36 evaluation */
+const USHORT XGI300paneltype[] =
+    { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
+      LCD_1280x960,  LCD_640x480,  LCD_1024x600,  LCD_1152x768,
+       LCD_1024x768, LCD_1024x768,  LCD_1024x768,
+      LCD_1024x768,  LCD_1024x768, LCD_1024x768,  LCD_1024x768 };
+
+const USHORT XGI310paneltype[] =
+    { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
+      LCD_640x480,   LCD_1024x600, LCD_1152x864,  LCD_1280x960,
+      LCD_1152x768,  LCD_1400x1050,LCD_1280x768,  LCD_1600x1200,
+      LCD_1024x768, LCD_1024x768,  LCD_1024x768 };
+
+static const struct _XGI_crt2type {
+	char name[10];
+	int type_no;
+	int tvplug_no;
+} XGI_crt2type[] = {
+	{"NONE", 	0, 		-1},
+	{"LCD",  	DISPTYPE_LCD, 	-1},
+	{"TV",   	DISPTYPE_TV, 	-1},
+	{"VGA",  	DISPTYPE_CRT2, 	-1},
+	{"SVIDEO", 	DISPTYPE_TV, 	TVPLUG_SVIDEO},
+	{"COMPOSITE", 	DISPTYPE_TV, 	TVPLUG_COMPOSITE},
+	{"SCART", 	DISPTYPE_TV, 	TVPLUG_SCART},
+	{"none", 	0, 		-1},
+	{"lcd",  	DISPTYPE_LCD, 	-1},
+	{"tv",   	DISPTYPE_TV, 	-1},
+	{"vga",  	DISPTYPE_CRT2, 	-1},
+	{"svideo", 	DISPTYPE_TV, 	TVPLUG_SVIDEO},
+	{"composite", 	DISPTYPE_TV, 	TVPLUG_COMPOSITE},
+	{"scart", 	DISPTYPE_TV, 	TVPLUG_SCART},
+	{"\0",  	-1, 		-1}
+};
+
+/* Queue mode selection for 310 series */
+static const struct _XGI_queuemode {
+	char name[6];
+	int type_no;
+} XGI_queuemode[] = {
+	{"AGP",  	AGP_CMD_QUEUE},
+	{"VRAM", 	VM_CMD_QUEUE},
+	{"MMIO", 	MMIO_CMD},
+	{"agp",  	AGP_CMD_QUEUE},
+	{"vram", 	VM_CMD_QUEUE},
+	{"mmio", 	MMIO_CMD},
+	{"\0",   	-1}
+};
+
+/* TV standard */
+static const struct _XGI_tvtype {
+	char name[6];
+	int type_no;
+} XGI_tvtype[] = {
+	{"PAL",  	1},
+	{"NTSC", 	2},
+	{"pal", 	1},
+	{"ntsc",  	2},
+	{"\0",   	-1}
+};
+
+static const struct _XGI_vrate {
+	u16 idx;
+	u16 xres;
+	u16 yres;
+	u16 refresh;
+} XGIfb_vrate[] = {
+	{1,  640,  480, 60}, {2,  640,  480,  72}, {3, 640,   480,  75}, {4,  640, 480,  85},
+	{5,  640,  480,100}, {6,  640,  480, 120}, {7, 640,   480, 160}, {8,  640, 480, 200},
+	{1,  720,  480, 60},
+	{1,  720,  576, 58},
+	{1,  800,  480, 60}, {2,  800,  480,  75}, {3, 800,   480,  85},
+        {1,  800,  600,  60}, {2, 800,   600,  72}, {3,  800, 600,  75},
+	{4,  800,  600, 85}, {5,  800,  600, 100}, {6, 800,   600, 120}, {7,  800, 600, 160},
+	{1, 1024,  768,  60}, {2, 1024,  768,  70}, {3, 1024, 768,  75},
+	{4, 1024,  768, 85}, {5, 1024,  768, 100}, {6, 1024,  768, 120},
+	{1, 1024,  576, 60}, {2, 1024,  576,  75}, {3, 1024,  576,  85},
+	{1, 1024,  600, 60},
+	{1, 1152,  768, 60},
+	{1, 1280,  720, 60}, {2, 1280,  720,  75}, {3, 1280,  720,  85},
+	{1, 1280,  768, 60},
+        {1, 1280, 1024,  60}, {2, 1280, 1024,  75}, {3, 1280, 1024,  85},
+	{1, 1280,  960, 70},
+	{1, 1400, 1050, 60},
+	{1, 1600, 1200, 60}, {2, 1600, 1200,  65}, {3, 1600, 1200,  70}, {4, 1600, 1200,  75},
+	{5, 1600, 1200, 85}, {6, 1600, 1200, 100}, {7, 1600, 1200, 120},
+	{1, 1920, 1440, 60}, {2, 1920, 1440,  65}, {3, 1920, 1440,  70}, {4, 1920, 1440,  75},
+	{5, 1920, 1440, 85}, {6, 1920, 1440, 100},
+	{1, 2048, 1536, 60}, {2, 2048, 1536,  65}, {3, 2048, 1536,  70}, {4, 2048, 1536,  75},
+	{5, 2048, 1536, 85},
+	{0, 0, 0, 0}
+};
+
+static const struct _chswtable {
+    int subsysVendor;
+    int subsysCard;
+    char *vendorName;
+    char *cardName;
+} mychswtable[] = {
+        { 0x1631, 0x1002, "Mitachi", "0x1002" },
+	{ 0,      0,      ""       , ""       }
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+/* Offscreen layout */
+typedef struct _XGI_GLYINFO {
+	unsigned char ch;
+	int fontwidth;
+	int fontheight;
+	u8 gmask[72];
+	int ngmask;
+} XGI_GLYINFO;
+#endif
+
+typedef struct _XGI_OH {
+	struct _XGI_OH *poh_next;
+	struct _XGI_OH *poh_prev;
+	unsigned long offset;
+	unsigned long size;
+} XGI_OH;
+
+typedef struct _XGI_OHALLOC {
+	struct _XGI_OHALLOC *poha_next;
+	XGI_OH aoh[1];
+} XGI_OHALLOC;
+
+typedef struct _XGI_HEAP {
+	XGI_OH oh_free;
+	XGI_OH oh_used;
+	XGI_OH *poh_freelist;
+	XGI_OHALLOC *poha_chain;
+	unsigned long max_freesize;
+} XGI_HEAP;
+
+static unsigned long XGIfb_hwcursor_vbase;
+
+static unsigned long XGIfb_heap_start;
+static unsigned long XGIfb_heap_end;
+static unsigned long XGIfb_heap_size;
+static XGI_HEAP      XGIfb_heap;
+
+// Eden Chen
+static const struct _XGI_TV_filter {
+	u8 filter[9][4];
+} XGI_TV_filter[] = {
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_0 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_1 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_2 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xEB,0x04,0x25,0x18},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xF6,0x06,0x1A,0x14},
+	   {0xFA,0x06,0x16,0x14},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_3 */
+	   {0xF1,0x04,0x1F,0x18},
+	   {0xEE,0x0D,0x22,0x06},
+	   {0xF7,0x06,0x19,0x14},
+	   {0xF4,0x0B,0x1C,0x0A},
+	   {0xFA,0x07,0x16,0x12},
+	   {0xF9,0x0A,0x17,0x0C},
+	   {0x00,0x07,0x10,0x12},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_4 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_5 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xEB,0x04,0x25,0x18},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xF6,0x06,0x1A,0x14},
+	   {0xFA,0x06,0x16,0x14},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_6 */
+	   {0xEB,0x04,0x25,0x18},
+	   {0xE7,0x0E,0x29,0x04},
+	   {0xEE,0x0C,0x22,0x08},
+	   {0xF6,0x0B,0x1A,0x0A},
+	   {0xF9,0x0A,0x17,0x0C},
+	   {0xFC,0x0A,0x14,0x0C},
+	   {0x00,0x08,0x10,0x10},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_7 */
+	   {0xEC,0x02,0x24,0x1C},
+	   {0xF2,0x04,0x1E,0x18},
+	   {0xEB,0x15,0x25,0xF6},
+	   {0xF4,0x10,0x1C,0x00},
+	   {0xF8,0x0F,0x18,0x02},
+	   {0x00,0x04,0x10,0x18},
+	   {0x01,0x06,0x0F,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_0 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_1 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_2 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xF1,0xF7,0x01,0x32},
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xF9,0xFF,0x17,0x22},
+	   {0xFB,0x01,0x15,0x1E},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_3 */
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xEE,0xFE,0x22,0x24},
+	   {0xF3,0x00,0x1D,0x20},
+	   {0xF9,0x03,0x17,0x1A},
+	   {0xFB,0x02,0x14,0x1E},
+	   {0xFB,0x04,0x15,0x18},
+	   {0x00,0x06,0x10,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_4 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_5 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xF1,0xF7,0x1F,0x32},
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xF9,0xFF,0x17,0x22},
+	   {0xFB,0x01,0x15,0x1E},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_6 */
+	   {0xF5,0xEE,0x1B,0x2A},
+	   {0xEE,0xFE,0x22,0x24},
+	   {0xF3,0x00,0x1D,0x20},
+	   {0xF9,0x03,0x17,0x1A},
+	   {0xFB,0x02,0x14,0x1E},
+	   {0xFB,0x04,0x15,0x18},
+	   {0x00,0x06,0x10,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_7 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0xEB,0x05,0x25,0x16},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xFA,0x07,0x16,0x12},
+	   {0x00,0x07,0x10,0x12},
+	   {0xFF,0xFF,0xFF,0xFF} }}
+};
+
+static int           filter = -1;
+static unsigned char filter_tb;
+
+
+/* ---------------------- Routine prototypes ------------------------- */
+
+/* Interface used by the world */
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options);
+#endif
+
+/* Interface to the low level console driver */
+
+
+
+/* fbdev routines */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+       int	XGIfb_init(void);
+static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix,
+			      int con,
+			      struct fb_info *info);
+static int      XGIfb_get_var(struct fb_var_screeninfo *var,
+			      int con,
+			      struct fb_info *info);
+static int      XGIfb_set_var(struct fb_var_screeninfo *var,
+			      int con,
+			      struct fb_info *info);
+static void     XGIfb_crtc_to_var(struct fb_var_screeninfo *var);
+static int      XGIfb_get_cmap(struct fb_cmap *cmap,
+			       int kspc,
+			       int con,
+			       struct fb_info *info);
+static int      XGIfb_set_cmap(struct fb_cmap *cmap,
+			       int kspc,
+			       int con,
+			       struct fb_info *info);
+static int      XGIfb_update_var(int con,
+				 struct fb_info *info);
+static int      XGIfb_switch(int con,
+			     struct fb_info *info);
+static void     XGIfb_blank(int blank,
+			    struct fb_info *info);
+static void     XGIfb_set_disp(int con,
+			       struct fb_var_screeninfo *var,
+                               struct fb_info *info);
+static int      XGI_getcolreg(unsigned regno, unsigned *red, unsigned *green,
+			      unsigned *blue, unsigned *transp,
+			      struct fb_info *fb_info);
+static void     XGIfb_do_install_cmap(int con,
+                                      struct fb_info *info);
+static void     XGI_get_glyph(struct fb_info *info,
+                              XGI_GLYINFO *gly);
+static int 	XGIfb_mmap(struct fb_info *info, struct file *file,
+		           struct vm_area_struct *vma);
+static int      XGIfb_ioctl(struct inode *inode, struct file *file,
+		       	    unsigned int cmd, unsigned long arg, int con,
+		       	    struct fb_info *info);
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+XGIINITSTATIC int __init xgifb_init(void);
+static int      XGIfb_set_par(struct fb_info *info);
+static int      XGIfb_blank(int blank,
+                            struct fb_info *info);
+/*static int 	XGIfb_mmap(struct fb_info *info, struct file *file,
+		           struct vm_area_struct *vma);
+*/
+extern void     fbcon_XGI_fillrect(struct fb_info *info,
+                                   const struct fb_fillrect *rect);
+extern void     fbcon_XGI_copyarea(struct fb_info *info,
+                                   const struct fb_copyarea *area);
+#if 0
+extern void     cfb_imageblit(struct fb_info *info,
+                              const struct fb_image *image);
+#endif
+extern int      fbcon_XGI_sync(struct fb_info *info);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+			    unsigned long arg);
+#else
+static int      XGIfb_ioctl(struct inode *inode,
+	 		    struct file *file,
+		       	    unsigned int cmd,
+			    unsigned long arg,
+		       	    struct fb_info *info);
+#endif
+
+/*
+extern int	XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr,
+			      PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			      unsigned char modeno, unsigned char rateindex);
+extern int      XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			 unsigned char modeno, unsigned char rateindex,
+			 unsigned int *left_margin, unsigned int *right_margin,
+			 unsigned int *upper_margin, unsigned int *lower_margin,
+			 unsigned int *hsync_len, unsigned int *vsync_len,
+			 unsigned int *sync, unsigned int *vmode);
+*/
+#endif
+			extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
+static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+			      struct fb_info *info);
+
+/* Internal 2D accelerator functions */
+extern int      XGIfb_initaccel(void);
+extern void     XGIfb_syncaccel(void);
+
+/* Internal general routines */
+static void     XGIfb_search_mode(const char *name);
+static int      XGIfb_validate_mode(int modeindex);
+static u8       XGIfb_search_refresh_rate(unsigned int rate);
+static int      XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			unsigned blue, unsigned transp,
+			struct fb_info *fb_info);
+static int      XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+		      	struct fb_info *info);
+static void     XGIfb_pre_setmode(void);
+static void     XGIfb_post_setmode(void);
+
+static BOOLEAN  XGIfb_CheckVBRetrace(void);
+static BOOLEAN  XGIfbcheckvretracecrt2(void);
+static BOOLEAN  XGIfbcheckvretracecrt1(void);
+static BOOLEAN  XGIfb_bridgeisslave(void);
+
+struct XGI_memreq {
+	unsigned long offset;
+	unsigned long size;
+};
+
+/* XGI-specific Export functions */
+void            XGI_dispinfo(struct ap_data *rec);
+void            XGI_malloc(struct XGI_memreq *req);
+void            XGI_free(unsigned long base);
+
+/* Internal hardware access routines */
+void            XGIfb_set_reg4(u16 port, unsigned long data);
+u32             XGIfb_get_reg3(u16 port);
+
+/* Chipset-dependent internal routines */
+
+
+static int      XGIfb_get_dram_size(void);
+static void     XGIfb_detect_VB(void);
+static void     XGIfb_get_VB_type(void);
+static int      XGIfb_has_VB(void);
+
+
+/* Internal heap routines */
+static int      XGIfb_heap_init(void);
+static XGI_OH   *XGIfb_poh_new_node(void);
+static XGI_OH   *XGIfb_poh_allocate(unsigned long size);
+static void     XGIfb_delete_node(XGI_OH *poh);
+static void     XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh);
+static XGI_OH   *XGIfb_poh_free(unsigned long base);
+static void     XGIfb_free_node(XGI_OH *poh);
+
+/* Internal routines to access PCI configuration space */
+BOOLEAN         XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	          	unsigned long offset, unsigned long set, unsigned long *value);
+//BOOLEAN         XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+//	         	unsigned long offset, unsigned long set, unsigned long *value);
+
+
+/* Routines from init.c/init301.c */
+extern void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+extern BOOLEAN  XGIInitNew(PXGI_HW_DEVICE_INFO HwDeviceExtension);
+extern BOOLEAN  XGISetModeNew(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo);
+//extern void     XGI_SetEnableDstn(VB_DEVICE_INFO *XGI_Pr);
+extern void     XGI_LongWait(VB_DEVICE_INFO *XGI_Pr);
+extern USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+/* TW: Chrontel TV functions */
+extern USHORT 	XGI_GetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void 	XGI_SetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern USHORT 	XGI_GetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void 	XGI_SetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void     XGI_SetCH70xxANDOR(VB_DEVICE_INFO *XGI_Pr, USHORT tempax,USHORT tempbh);
+extern void     XGI_DDC2Delay(VB_DEVICE_INFO *XGI_Pr, USHORT delaytime);
+
+/* TW: Sensing routines */
+void            XGI_Sense30x(void);
+int             XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch);
+
+extern XGI21_LVDSCapStruct XGI21_LCDCapList[13];
+#endif
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
new file mode 100644
index 00000000000..867012b48a0
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -0,0 +1,3773 @@
+/*
+ * XG20, XG21, XG40, XG42 frame buffer device
+ * for Linux kernels  2.5.x, 2.6.x
+ * Base on TW's sis fbdev code.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+
+#include "osdef.h"
+
+
+#ifndef XGIFB_PAN
+#define XGIFB_PAN
+#endif
+
+#include <asm/io.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "XGIfb.h"
+#include "vgatypes.h"
+#include "XGI_main.h"
+#include "vb_util.h"
+
+
+#define Index_CR_GPIO_Reg1 0x48
+#define Index_CR_GPIO_Reg2 0x49
+#define Index_CR_GPIO_Reg3 0x4a
+
+#define GPIOG_EN    (1<<6)
+#define GPIOG_WRITE (1<<6)
+#define GPIOG_READ  (1<<1)
+int XGIfb_GetXG21DefaultLVDSModeIdx(void);
+
+/* -------------------- Macro definitions ---------------------------- */
+
+#undef XGIFBDEBUG
+
+#ifdef XGIFBDEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+#else
+#define DPRINTK(fmt, args...)
+#endif
+
+#ifdef XGIFBDEBUG
+static void dumpVGAReg(void)
+{
+    u8 i,reg;
+
+outXGIIDXREG(XGISR, 0x05, 0x86);
+/*
+outXGIIDXREG(XGISR, 0x08, 0x4f);
+outXGIIDXREG(XGISR, 0x0f, 0x20);
+outXGIIDXREG(XGISR, 0x11, 0x4f);
+outXGIIDXREG(XGISR, 0x13, 0x45);
+outXGIIDXREG(XGISR, 0x14, 0x51);
+outXGIIDXREG(XGISR, 0x1e, 0x41);
+outXGIIDXREG(XGISR, 0x1f, 0x0);
+outXGIIDXREG(XGISR, 0x20, 0xa1);
+outXGIIDXREG(XGISR, 0x22, 0xfb);
+outXGIIDXREG(XGISR, 0x26, 0x22);
+outXGIIDXREG(XGISR, 0x3e, 0x07);
+*/
+
+//outXGIIDXREG(XGICR, 0x19, 0x00);
+//outXGIIDXREG(XGICR, 0x1a, 0x3C);
+//outXGIIDXREG(XGICR, 0x22, 0xff);
+//outXGIIDXREG(XGICR, 0x3D, 0x10);
+
+//outXGIIDXREG(XGICR, 0x4a, 0xf3);
+
+//outXGIIDXREG(XGICR, 0x57, 0x0);
+//outXGIIDXREG(XGICR, 0x7a, 0x2c);
+
+//outXGIIDXREG(XGICR, 0x82, 0xcc);
+//outXGIIDXREG(XGICR, 0x8c, 0x0);
+/*
+outXGIIDXREG(XGICR, 0x99, 0x1);
+outXGIIDXREG(XGICR, 0x41, 0x40);
+*/
+
+    for(i=0; i < 0x4f; i++)
+    {
+        inXGIIDXREG(XGISR, i, reg);
+        printk("\no 3c4 %x",i);
+        printk("\ni 3c5 => %x",reg);
+    }
+
+    for(i=0; i < 0xF0; i++)
+    {
+        inXGIIDXREG(XGICR, i, reg);
+        printk("\no 3d4 %x",i);
+        printk("\ni 3d5 => %x",reg);
+    }
+/*
+
+    outXGIIDXREG(XGIPART1,0x2F,1);
+    for(i=1; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART1, i, reg);
+        printk("\no d004 %x",i);
+        printk("\ni d005 => %x",reg);
+    }
+
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART2, i, reg);
+        printk("\no d010 %x",i);
+        printk("\ni d011 => %x",reg);
+    }
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART3, i, reg);
+        printk("\no d012 %x",i);
+        printk("\ni d013 => %x",reg);
+    }
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART4, i, reg);
+        printk("\no d014 %x",i);
+        printk("\ni d015 => %x",reg);
+    }
+*/
+}
+#else
+static inline void dumpVGAReg(void) {}
+#endif
+
+/* data for XGI components */
+struct video_info  xgi_video_info;
+
+
+#if 1
+#define DEBUGPRN(x)
+#else
+#define DEBUGPRN(x) printk(KERN_INFO x "\n");
+#endif
+
+
+/* --------------- Hardware Access Routines -------------------------- */
+
+#ifdef LINUX_KERNEL
+int
+XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			  unsigned char modeno, unsigned char rateindex)
+{
+    USHORT ModeNo = modeno;
+    USHORT ModeIdIndex = 0, ClockIndex = 0;
+    USHORT RefreshRateTableIndex = 0;
+
+    /*ULONG  temp = 0;*/
+    int    Clock;
+    XGI_Pr->ROMAddr  = HwDeviceExtension->pjVirtualRomBase;
+    InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+
+/*
+    temp = XGI_SearchModeID( ModeNo , &ModeIdIndex,  XGI_Pr ) ;
+    if(!temp) {
+    	printk(KERN_ERR "Could not find mode %x\n", ModeNo);
+    	return 65000;
+    }
+
+    RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+    RefreshRateTableIndex += (rateindex - 1);
+
+*/
+    ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+    if(HwDeviceExtension->jChipType < XGI_315H) {
+       ClockIndex &= 0x3F;
+    }
+    Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000 ;
+
+    return(Clock);
+}
+
+int
+XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			 unsigned char modeno, unsigned char rateindex,
+			 u32 *left_margin, u32 *right_margin,
+			 u32 *upper_margin, u32 *lower_margin,
+			 u32 *hsync_len, u32 *vsync_len,
+			 u32 *sync, u32 *vmode)
+{
+    USHORT ModeNo = modeno;
+    USHORT ModeIdIndex = 0, index = 0;
+    USHORT RefreshRateTableIndex = 0;
+
+    unsigned short VRE, VBE, VRS, VBS, VDE, VT;
+    unsigned short HRE, HBE, HRS, HBS, HDE, HT;
+    unsigned char  sr_data, cr_data, cr_data2;
+    unsigned long cr_data3;
+    int            A, B, C, D, E, F, temp, j;
+    XGI_Pr->ROMAddr  = HwDeviceExtension->pjVirtualRomBase;
+    InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+  RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+/*
+    temp = XGI_SearchModeID( ModeNo, &ModeIdIndex, XGI_Pr);
+    if(!temp) return 0;
+
+    RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+    RefreshRateTableIndex += (rateindex - 1);
+*/
+    index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[0];
+
+    /* Horizontal total */
+    HT = (cr_data & 0xff) |
+         ((unsigned short) (sr_data & 0x03) << 8);
+    A = HT + 5;
+
+    /*cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+     Horizontal display enable end
+    HDE = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x0C) << 6);*/
+    HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) -1;
+    E = HDE + 1;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[3];
+
+    /* Horizontal retrace (=sync) start */
+    HRS = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0xC0) << 2);
+    F = HRS - E - 3;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+    /* Horizontal blank start */
+    HBS = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x30) << 4);
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[6];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[2];
+
+    cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[4];
+
+    /* Horizontal blank end */
+    HBE = (cr_data & 0x1f) |
+          ((unsigned short) (cr_data2 & 0x80) >> 2) |
+	  ((unsigned short) (sr_data & 0x03) << 6);
+
+    /* Horizontal retrace (=sync) end */
+    HRE = (cr_data2 & 0x1f) | ((sr_data & 0x04) << 3);
+
+    temp = HBE - ((E - 1) & 255);
+    B = (temp > 0) ? temp : (temp + 256);
+
+    temp = HRE - ((E + F + 3) & 63);
+    C = (temp > 0) ? temp : (temp + 64);
+
+    D = B - F - C;
+
+    *left_margin = D * 8;
+    *right_margin = F * 8;
+    *hsync_len = C * 8;
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[14];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[8];
+
+    cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[9];
+
+    /* Vertical total */
+    VT = (cr_data & 0xFF) |
+         ((unsigned short) (cr_data2 & 0x01) << 8) |
+	 ((unsigned short)(cr_data2 & 0x20) << 4) |
+	 ((unsigned short) (sr_data & 0x01) << 10);
+    A = VT + 2;
+
+    //cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+    /* Vertical display enable end */
+/*    VDE = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x02) << 7) |
+	  ((unsigned short) (cr_data2 & 0x40) << 3) |
+	  ((unsigned short) (sr_data & 0x02) << 9); */
+    VDE = XGI_Pr->RefIndex[RefreshRateTableIndex].YRes  -1;
+    E = VDE + 1;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+    /* Vertical retrace (=sync) start */
+    VRS = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x04) << 6) |
+	  ((unsigned short) (cr_data2 & 0x80) << 2) |
+	  ((unsigned short) (sr_data & 0x08) << 7);
+    F = VRS + 1 - E;
+
+    cr_data =  XGI_Pr->XGINEWUB_CRT1Table[index].CR[12];
+
+    cr_data3 = (XGI_Pr->XGINEWUB_CRT1Table[index].CR[14] & 0x80) << 5;
+
+    /* Vertical blank start */
+    VBS = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x08) << 5) |
+	  ((unsigned short) (cr_data3 & 0x20) << 4) |
+	  ((unsigned short) (sr_data & 0x04) << 8);
+
+    cr_data =  XGI_Pr->XGINEWUB_CRT1Table[index].CR[13];
+
+    /* Vertical blank end */
+    VBE = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x10) << 4);
+    temp = VBE - ((E - 1) & 511);
+    B = (temp > 0) ? temp : (temp + 512);
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[11];
+
+    /* Vertical retrace (=sync) end */
+    VRE = (cr_data & 0x0f) | ((sr_data & 0x20) >> 1);
+    temp = VRE - ((E + F - 1) & 31);
+    C = (temp > 0) ? temp : (temp + 32);
+
+    D = B - F - C;
+
+    *upper_margin = D;
+    *lower_margin = F;
+    *vsync_len = C;
+
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x8000)
+       *sync &= ~FB_SYNC_VERT_HIGH_ACT;
+    else
+       *sync |= FB_SYNC_VERT_HIGH_ACT;
+
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x4000)
+       *sync &= ~FB_SYNC_HOR_HIGH_ACT;
+    else
+       *sync |= FB_SYNC_HOR_HIGH_ACT;
+
+    *vmode = FB_VMODE_NONINTERLACED;
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x0080)
+       *vmode = FB_VMODE_INTERLACED;
+    else {
+      j = 0;
+      while(XGI_Pr->EModeIDTable[j].Ext_ModeID != 0xff) {
+          if(XGI_Pr->EModeIDTable[j].Ext_ModeID ==
+	                  XGI_Pr->RefIndex[RefreshRateTableIndex].ModeID) {
+              if(XGI_Pr->EModeIDTable[j].Ext_ModeFlag & DoubleScanMode) {
+	      	  *vmode = FB_VMODE_DOUBLE;
+              }
+	      break;
+          }
+	  j++;
+      }
+    }
+
+#if 0  /* That's bullshit, only the resolution needs to be shifted */
+    if((*vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+       *upper_margin <<= 1;
+       *lower_margin <<= 1;
+       *vsync_len <<= 1;
+    } else if((*vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+       *upper_margin >>= 1;
+       *lower_margin >>= 1;
+       *vsync_len >>= 1;
+    }
+#endif
+
+    return 1;
+}
+
+#endif
+
+
+
+void XGIRegInit(VB_DEVICE_INFO *XGI_Pr, ULONG BaseAddr)
+{
+   XGI_Pr->RelIO = BaseAddr;
+   XGI_Pr->P3c4 = BaseAddr + 0x14;
+   XGI_Pr->P3d4 = BaseAddr + 0x24;
+   XGI_Pr->P3c0 = BaseAddr + 0x10;
+   XGI_Pr->P3ce = BaseAddr + 0x1e;
+   XGI_Pr->P3c2 = BaseAddr + 0x12;
+   XGI_Pr->P3ca = BaseAddr + 0x1a;
+   XGI_Pr->P3c6 = BaseAddr + 0x16;
+   XGI_Pr->P3c7 = BaseAddr + 0x17;
+   XGI_Pr->P3c8 = BaseAddr + 0x18;
+   XGI_Pr->P3c9 = BaseAddr + 0x19;
+   XGI_Pr->P3da = BaseAddr + 0x2A;
+   XGI_Pr->Part1Port = BaseAddr + XGI_CRT2_PORT_04;   /* Digital video interface registers (LCD) */
+   XGI_Pr->Part2Port = BaseAddr + XGI_CRT2_PORT_10;   /* 301 TV Encoder registers */
+   XGI_Pr->Part3Port = BaseAddr + XGI_CRT2_PORT_12;   /* 301 Macrovision registers */
+   XGI_Pr->Part4Port = BaseAddr + XGI_CRT2_PORT_14;   /* 301 VGA2 (and LCD) registers */
+   XGI_Pr->Part5Port = BaseAddr + XGI_CRT2_PORT_14+2; /* 301 palette address port registers */
+
+}
+
+
+void XGIfb_set_reg4(u16 port, unsigned long data)
+{
+	outl((u32) (data & 0xffffffff), port);
+}
+
+u32 XGIfb_get_reg3(u16 port)
+{
+	u32 data;
+
+	data = inl(port);
+	return (data);
+}
+
+/* ------------ Interface for init & mode switching code ------------- */
+
+BOOLEAN
+XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	unsigned long offset, unsigned long set, unsigned long *value)
+{
+	static struct pci_dev *pdev = NULL;
+	static unsigned char init = 0, valid_pdev = 0;
+
+	if (!set)
+		DPRINTK("XGIfb: Get VGA offset 0x%lx\n", offset);
+	else
+		DPRINTK("XGIfb: Set offset 0x%lx to 0x%lx\n", offset, *value);
+
+	if (!init) {
+		init = TRUE;
+		pdev = pci_get_device(PCI_VENDOR_ID_XG, xgi_video_info.chip_id, pdev);
+		if (pdev) {
+			valid_pdev = TRUE;
+			pci_dev_put(pdev);
+		}
+	}
+
+	if (!valid_pdev) {
+		printk(KERN_DEBUG "XGIfb: Can't find XGI %d VGA device.\n",
+				xgi_video_info.chip_id);
+		return FALSE;
+	}
+
+	if (set == 0)
+		pci_read_config_dword(pdev, offset, (u32 *)value);
+	else
+		pci_write_config_dword(pdev, offset, (u32)(*value));
+
+	return TRUE;
+}
+
+/*BOOLEAN XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	unsigned long offset, unsigned long set, unsigned long *value)
+{
+	static struct pci_dev *pdev = NULL;
+	static unsigned char init = 0, valid_pdev = 0;
+	u16 nbridge_id = 0;
+
+	if (!init) {
+		init = TRUE;
+		switch (xgi_video_info.chip) {
+		case XGI_540:
+			nbridge_id = PCI_DEVICE_ID_XG_540;
+			break;
+		case XGI_630:
+			nbridge_id = PCI_DEVICE_ID_XG_630;
+			break;
+		case XGI_730:
+			nbridge_id = PCI_DEVICE_ID_XG_730;
+			break;
+		case XGI_550:
+			nbridge_id = PCI_DEVICE_ID_XG_550;
+			break;
+		case XGI_650:
+			nbridge_id = PCI_DEVICE_ID_XG_650;
+			break;
+		case XGI_740:
+			nbridge_id = PCI_DEVICE_ID_XG_740;
+			break;
+		default:
+			nbridge_id = 0;
+			break;
+		}
+
+		pdev = pci_find_device(PCI_VENDOR_ID_SI, nbridge_id, pdev);
+		if (pdev)
+			valid_pdev = TRUE;
+	}
+
+	if (!valid_pdev) {
+		printk(KERN_DEBUG "XGIfb: Can't find XGI %d North Bridge device.\n",
+				nbridge_id);
+		return FALSE;
+	}
+
+	if (set == 0)
+		pci_read_config_dword(pdev, offset, (u32 *)value);
+	else
+		pci_write_config_dword(pdev, offset, (u32)(*value));
+
+	return TRUE;
+}
+*/
+/* ------------------ Internal helper routines ----------------- */
+
+static void XGIfb_search_mode(const char *name)
+{
+	int i = 0, j = 0, l;
+
+	if(name == NULL) {
+	   printk(KERN_ERR "XGIfb: Internal error, using default mode.\n");
+	   xgifb_mode_idx = DEFAULT_MODE;
+	   if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+	   {
+	       xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+	   }
+	   return;
+	}
+
+
+        if (!strcmp(name, XGIbios_mode[MODE_INDEX_NONE].name)) {
+	   printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+	   xgifb_mode_idx = DEFAULT_MODE;
+	   if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+	   {
+	       xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+	   }
+	   return;
+	}
+
+	while(XGIbios_mode[i].mode_no != 0) {
+		l = min(strlen(name), strlen(XGIbios_mode[i].name));
+		if (!strncmp(name, XGIbios_mode[i].name, l)) {
+			xgifb_mode_idx = i;
+			j = 1;
+			break;
+		}
+		i++;
+	}
+	if(!j) printk(KERN_INFO "XGIfb: Invalid mode '%s'\n", name);
+}
+
+static void XGIfb_search_vesamode(unsigned int vesamode)
+{
+	int i = 0, j = 0;
+
+	if(vesamode == 0) {
+
+		printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+		xgifb_mode_idx = DEFAULT_MODE;
+		if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+		{
+		    xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+		}
+		return;
+	}
+
+	vesamode &= 0x1dff;  /* Clean VESA mode number from other flags */
+
+	while(XGIbios_mode[i].mode_no != 0) {
+		if( (XGIbios_mode[i].vesa_mode_no_1 == vesamode) ||
+		    (XGIbios_mode[i].vesa_mode_no_2 == vesamode) ) {
+			xgifb_mode_idx = i;
+			j = 1;
+			break;
+		}
+		i++;
+	}
+	if(!j) printk(KERN_INFO "XGIfb: Invalid VESA mode 0x%x'\n", vesamode);
+}
+
+int XGIfb_GetXG21LVDSData(void)
+{
+    u8 tmp;
+    unsigned char *pData;
+    int i,j,k;
+
+    inXGIIDXREG(XGISR,0x1e,tmp);
+    outXGIIDXREG(XGISR, 0x1e, tmp|4);
+
+    pData = xgi_video_info.mmio_vbase+0x20000;
+    if ((pData[0x0]==0x55) && (pData[0x1]==0xAA) && (pData[0x65] & 0x1))
+    {
+        i = pData[ 0x316 ] | ( pData[ 0x317 ] << 8 );
+        j = pData[ i-1 ] ;
+        if ( j == 0xff )
+        {
+	  j = 1;
+	}
+        k = 0;
+        do
+        {
+                XGI21_LCDCapList[k].LVDS_Capability = pData[ i ] | ( pData[ i + 1 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHT = pData[ i + 2 ] | ( pData[ i + 3 ] << 8 ) ;
+                XGI21_LCDCapList[k].LVDSVT = pData[ i + 4 ] | ( pData[ i + 5 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHDE = pData[ i + 6 ] | ( pData[ i + 7 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVDE = pData[ i + 8 ] | ( pData[ i + 9 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHFP = pData[ i + 10 ] | ( pData[ i + 11 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVFP = pData[ i + 12 ] | ( pData[ i + 13 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHSYNC = pData[ i + 14 ] | ( pData[ i + 15 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVSYNC = pData[ i + 16 ] | ( pData[ i + 17 ] << 8 );
+                XGI21_LCDCapList[k].VCLKData1 = pData[ i + 18 ] ;
+                XGI21_LCDCapList[k].VCLKData2 = pData[ i + 19 ] ;
+                XGI21_LCDCapList[k].PSC_S1 = pData[ i + 20 ] ;
+                XGI21_LCDCapList[k].PSC_S2 = pData[ i + 21 ] ;
+                XGI21_LCDCapList[k].PSC_S3 = pData[ i + 22 ] ;
+                XGI21_LCDCapList[k].PSC_S4 = pData[ i + 23 ] ;
+                XGI21_LCDCapList[k].PSC_S5 = pData[ i + 24 ] ;
+                i += 25;
+                j--;
+                k++;
+        } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+        return 1;
+    }
+    return 0;
+}
+
+int XGIfb_GetXG21DefaultLVDSModeIdx(void)
+{
+
+	int found_mode = 0;
+	int XGIfb_mode_idx = 0;
+
+	found_mode = 0;
+	while( (XGIbios_mode[XGIfb_mode_idx].mode_no != 0) &&
+	       (XGIbios_mode[XGIfb_mode_idx].xres <= XGI21_LCDCapList[0].LVDSHDE) )
+	{
+		if( (XGIbios_mode[XGIfb_mode_idx].xres == XGI21_LCDCapList[0].LVDSHDE) &&
+		    (XGIbios_mode[XGIfb_mode_idx].yres == XGI21_LCDCapList[0].LVDSVDE) &&
+		    (XGIbios_mode[XGIfb_mode_idx].bpp == 8))
+		{
+			XGIfb_mode_no = XGIbios_mode[XGIfb_mode_idx].mode_no;
+			found_mode = 1;
+			break;
+		}
+		XGIfb_mode_idx++;
+	}
+        if (!found_mode)
+	  XGIfb_mode_idx = 0;
+
+	return (XGIfb_mode_idx);
+}
+
+
+static int XGIfb_validate_mode(int myindex)
+{
+   u16 xres, yres;
+
+    if (xgi_video_info.chip == XG21)
+    {
+        if ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD)
+        {
+	    xres = XGI21_LCDCapList[0].LVDSHDE;
+	    yres = XGI21_LCDCapList[0].LVDSVDE;
+	    if(XGIbios_mode[myindex].xres > xres)
+	        return(-1);
+            if(XGIbios_mode[myindex].yres > yres)
+	        return(-1);
+            if ((XGIbios_mode[myindex].xres < xres) && (XGIbios_mode[myindex].yres < yres) )
+	    {
+              if (XGIbios_mode[myindex].bpp > 8)
+	          return(-1);
+	    }
+
+       }
+       return(myindex);
+
+    }
+
+    /* FIXME: for now, all is valid on XG27 */
+    if (xgi_video_info.chip == XG27)
+	    return(myindex);
+
+    if(!(XGIbios_mode[myindex].chipset & MD_XGI315))
+        return(-1);
+
+   switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+     case DISPTYPE_LCD:
+	switch (XGIhw_ext.ulCRT2LCDType) {
+	case LCD_640x480:
+		xres =  640; yres =  480;  break;
+	case LCD_800x600:
+		xres =  800; yres =  600;  break;
+        case LCD_1024x600:
+		xres = 1024; yres =  600;  break;
+	case LCD_1024x768:
+	 	xres = 1024; yres =  768;  break;
+	case LCD_1152x768:
+		xres = 1152; yres =  768;  break;
+	case LCD_1280x960:
+	        xres = 1280; yres =  960;  break;
+	case LCD_1280x768:
+		xres = 1280; yres =  768;  break;
+	case LCD_1280x1024:
+		xres = 1280; yres = 1024;  break;
+	case LCD_1400x1050:
+		xres = 1400; yres = 1050;  break;
+	case LCD_1600x1200:
+		xres = 1600; yres = 1200;  break;
+//	case LCD_320x480:				// TW: FSTN
+//		xres =  320; yres =  480;  break;
+	default:
+	        xres =    0; yres =    0;  break;
+	}
+	if(XGIbios_mode[myindex].xres > xres) {
+	        return(-1);
+	}
+        if(XGIbios_mode[myindex].yres > yres) {
+	        return(-1);
+	}
+	if((XGIhw_ext.ulExternalChip == 0x01) ||   // LVDS
+           (XGIhw_ext.ulExternalChip == 0x05))    // LVDS+Chrontel
+	{
+	   switch (XGIbios_mode[myindex].xres) {
+	   	case 512:
+	       		if(XGIbios_mode[myindex].yres != 512) return -1;
+			if(XGIhw_ext.ulCRT2LCDType == LCD_1024x600) return -1;
+	       		break;
+	   	case 640:
+		       	if((XGIbios_mode[myindex].yres != 400) &&
+	           	   (XGIbios_mode[myindex].yres != 480))
+		          	return -1;
+	       		break;
+	   	case 800:
+		       	if(XGIbios_mode[myindex].yres != 600) return -1;
+	       		break;
+	   	case 1024:
+		       	if((XGIbios_mode[myindex].yres != 600) &&
+	           	   (XGIbios_mode[myindex].yres != 768))
+		          	return -1;
+			if((XGIbios_mode[myindex].yres == 600) &&
+			   (XGIhw_ext.ulCRT2LCDType != LCD_1024x600))
+			   	return -1;
+			break;
+		case 1152:
+			if((XGIbios_mode[myindex].yres) != 768) return -1;
+			if(XGIhw_ext.ulCRT2LCDType != LCD_1152x768) return -1;
+			break;
+	   	case 1280:
+		   	if((XGIbios_mode[myindex].yres != 768) &&
+	           	   (XGIbios_mode[myindex].yres != 1024))
+		          	return -1;
+			if((XGIbios_mode[myindex].yres == 768) &&
+			   (XGIhw_ext.ulCRT2LCDType != LCD_1280x768))
+			   	return -1;
+			break;
+	   	case 1400:
+		   	if(XGIbios_mode[myindex].yres != 1050) return -1;
+			break;
+	   	case 1600:
+		   	if(XGIbios_mode[myindex].yres != 1200) return -1;
+			break;
+	   	default:
+		        return -1;
+	   }
+	} else {
+	   switch (XGIbios_mode[myindex].xres) {
+	   	case 512:
+	       		if(XGIbios_mode[myindex].yres != 512) return -1;
+	       		break;
+	   	case 640:
+		       	if((XGIbios_mode[myindex].yres != 400) &&
+	           	   (XGIbios_mode[myindex].yres != 480))
+		          	return -1;
+	       		break;
+	   	case 800:
+		       	if(XGIbios_mode[myindex].yres != 600) return -1;
+	       		break;
+	   	case 1024:
+		       	if(XGIbios_mode[myindex].yres != 768) return -1;
+			break;
+	   	case 1280:
+		   	if((XGIbios_mode[myindex].yres != 960) &&
+	           	   (XGIbios_mode[myindex].yres != 1024))
+		          	return -1;
+			if(XGIbios_mode[myindex].yres == 960) {
+			    if(XGIhw_ext.ulCRT2LCDType == LCD_1400x1050)
+			   	return -1;
+			}
+			break;
+	   	case 1400:
+		   	if(XGIbios_mode[myindex].yres != 1050) return -1;
+			break;
+	   	case 1600:
+		   	if(XGIbios_mode[myindex].yres != 1200) return -1;
+			break;
+	   	default:
+		        return -1;
+	   }
+	}
+	break;
+     case DISPTYPE_TV:
+	switch (XGIbios_mode[myindex].xres) {
+	case 512:
+	case 640:
+	case 800:
+		break;
+	case 720:
+		if (xgi_video_info.TV_type == TVMODE_NTSC) {
+			if (XGIbios_mode[myindex].yres != 480) {
+				return(-1);
+			}
+		} else if (xgi_video_info.TV_type == TVMODE_PAL) {
+			if (XGIbios_mode[myindex].yres != 576) {
+				return(-1);
+			}
+		}
+		// TW: LVDS/CHRONTEL does not support 720
+		if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+					xgi_video_info.hasVB == HASVB_CHRONTEL) {
+				return(-1);
+		}
+		break;
+	case 1024:
+		if (xgi_video_info.TV_type == TVMODE_NTSC) {
+			if(XGIbios_mode[myindex].bpp == 32) {
+			       return(-1);
+			}
+		}
+		// TW: LVDS/CHRONTEL only supports < 800 (1024 on 650/Ch7019)
+		if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+					xgi_video_info.hasVB == HASVB_CHRONTEL) {
+		    if(xgi_video_info.chip < XGI_315H) {
+				return(-1);
+		    }
+		}
+		break;
+	default:
+		return(-1);
+	}
+	break;
+     case DISPTYPE_CRT2:
+        if(XGIbios_mode[myindex].xres > 1280) return -1;
+	break;
+     }
+     return(myindex);
+
+}
+
+static void XGIfb_search_crt2type(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while(XGI_crt2type[i].type_no != -1) {
+		if (!strcmp(name, XGI_crt2type[i].name)) {
+			XGIfb_crt2type = XGI_crt2type[i].type_no;
+			XGIfb_tvplug = XGI_crt2type[i].tvplug_no;
+			break;
+		}
+		i++;
+	}
+	if(XGIfb_crt2type < 0)
+		printk(KERN_INFO "XGIfb: Invalid CRT2 type: %s\n", name);
+}
+
+static void XGIfb_search_queuemode(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while (XGI_queuemode[i].type_no != -1) {
+		if (!strcmp(name, XGI_queuemode[i].name)) {
+			XGIfb_queuemode = XGI_queuemode[i].type_no;
+			break;
+		}
+		i++;
+	}
+	if (XGIfb_queuemode < 0)
+		printk(KERN_INFO "XGIfb: Invalid queuemode type: %s\n", name);
+}
+
+static u8 XGIfb_search_refresh_rate(unsigned int rate)
+{
+	u16 xres, yres;
+	int i = 0;
+
+	xres = XGIbios_mode[xgifb_mode_idx].xres;
+	yres = XGIbios_mode[xgifb_mode_idx].yres;
+
+	XGIfb_rate_idx = 0;
+	while ((XGIfb_vrate[i].idx != 0) && (XGIfb_vrate[i].xres <= xres)) {
+		if ((XGIfb_vrate[i].xres == xres) && (XGIfb_vrate[i].yres == yres)) {
+			if (XGIfb_vrate[i].refresh == rate) {
+				XGIfb_rate_idx = XGIfb_vrate[i].idx;
+				break;
+			} else if (XGIfb_vrate[i].refresh > rate) {
+				if ((XGIfb_vrate[i].refresh - rate) <= 3) {
+					DPRINTK("XGIfb: Adjusting rate from %d up to %d\n",
+						rate, XGIfb_vrate[i].refresh);
+					XGIfb_rate_idx = XGIfb_vrate[i].idx;
+					xgi_video_info.refresh_rate = XGIfb_vrate[i].refresh;
+				} else if (((rate - XGIfb_vrate[i-1].refresh) <= 2)
+						&& (XGIfb_vrate[i].idx != 1)) {
+					DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+						rate, XGIfb_vrate[i-1].refresh);
+					XGIfb_rate_idx = XGIfb_vrate[i-1].idx;
+					xgi_video_info.refresh_rate = XGIfb_vrate[i-1].refresh;
+				}
+				break;
+			} else if((rate - XGIfb_vrate[i].refresh) <= 2) {
+				DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+						rate, XGIfb_vrate[i].refresh);
+	           		XGIfb_rate_idx = XGIfb_vrate[i].idx;
+		   		break;
+	       		}
+		}
+		i++;
+	}
+	if (XGIfb_rate_idx > 0) {
+		return XGIfb_rate_idx;
+	} else {
+		printk(KERN_INFO
+			"XGIfb: Unsupported rate %d for %dx%d\n", rate, xres, yres);
+		return 0;
+	}
+}
+
+static void XGIfb_search_tvstd(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while (XGI_tvtype[i].type_no != -1) {
+		if (!strcmp(name, XGI_tvtype[i].name)) {
+			XGIfb_tvmode = XGI_tvtype[i].type_no;
+			break;
+		}
+		i++;
+	}
+}
+
+static BOOLEAN XGIfb_bridgeisslave(void)
+{
+   unsigned char usScratchP1_00;
+
+   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+
+   inXGIIDXREG(XGIPART1,0x00,usScratchP1_00);
+   if( (usScratchP1_00 & 0x50) == 0x10)  {
+	   return TRUE;
+   } else {
+           return FALSE;
+   }
+}
+
+static BOOLEAN XGIfbcheckvretracecrt1(void)
+{
+   unsigned char temp;
+
+   inXGIIDXREG(XGICR,0x17,temp);
+   if(!(temp & 0x80)) return FALSE;
+
+
+   inXGIIDXREG(XGISR,0x1f,temp);
+   if(temp & 0xc0) return FALSE;
+
+
+   if(inXGIREG(XGIINPSTAT) & 0x08) return TRUE;
+   else 			   return FALSE;
+}
+
+static BOOLEAN XGIfbcheckvretracecrt2(void)
+{
+   unsigned char temp;
+   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+   inXGIIDXREG(XGIPART1, 0x30, temp);
+   if(temp & 0x02) return FALSE;
+   else 	   return TRUE;
+}
+
+static BOOLEAN XGIfb_CheckVBRetrace(void)
+{
+   if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+      if(XGIfb_bridgeisslave()) {
+         return(XGIfbcheckvretracecrt1());
+      } else {
+         return(XGIfbcheckvretracecrt2());
+      }
+   }
+   return(XGIfbcheckvretracecrt1());
+}
+
+/* ----------- FBDev related routines for all series ----------- */
+
+
+static void XGIfb_bpp_to_var(struct fb_var_screeninfo *var)
+{
+	switch(var->bits_per_pixel) {
+	   case 8:
+	   	var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 6;
+		xgi_video_info.video_cmap_len = 256;
+		break;
+	   case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		xgi_video_info.video_cmap_len = 16;
+		break;
+	   case 32:
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		xgi_video_info.video_cmap_len = 16;
+		break;
+	}
+}
+
+
+
+static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+		      struct fb_info *info)
+{
+
+	unsigned int htotal = var->left_margin + var->xres +
+		var->right_margin + var->hsync_len;
+	unsigned int vtotal = var->upper_margin + var->yres +
+		var->lower_margin + var->vsync_len;
+#if defined(__powerpc__)
+	u8 sr_data, cr_data;
+#endif
+	unsigned int drate = 0, hrate = 0;
+	int found_mode = 0;
+	int old_mode;
+//	unsigned char reg,reg1;
+
+	DEBUGPRN("Inside do_set_var");
+//        printk(KERN_DEBUG "XGIfb:var->yres=%d, var->upper_margin=%d, var->lower_margin=%d, var->vsync_len=%d\n", var->yres,var->upper_margin,var->lower_margin,var->vsync_len);
+
+        info->var.xres_virtual = var->xres_virtual;
+        info->var.yres_virtual = var->yres_virtual;
+        info->var.bits_per_pixel = var->bits_per_pixel;
+
+	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED)
+		vtotal <<= 1;
+	else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
+		vtotal <<= 2;
+	else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
+	{
+//		vtotal <<= 1;
+//		var->yres <<= 1;
+	}
+
+	if(!htotal || !vtotal) {
+		DPRINTK("XGIfb: Invalid 'var' information\n");
+		return -EINVAL;
+	}
+        printk(KERN_DEBUG "XGIfb: var->pixclock=%d, htotal=%d, vtotal=%d\n",
+                var->pixclock,htotal,vtotal);
+
+
+
+	if(var->pixclock && htotal && vtotal) {
+		drate = 1000000000 / var->pixclock;
+		hrate = (drate * 1000) / htotal;
+		xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+	} else {
+		xgi_video_info.refresh_rate = 60;
+	}
+
+	printk(KERN_DEBUG "XGIfb: Change mode to %dx%dx%d-%dHz\n",
+		var->xres,var->yres,var->bits_per_pixel,xgi_video_info.refresh_rate);
+
+	old_mode = xgifb_mode_idx;
+	xgifb_mode_idx = 0;
+
+	while( (XGIbios_mode[xgifb_mode_idx].mode_no != 0) &&
+	       (XGIbios_mode[xgifb_mode_idx].xres <= var->xres) ) {
+		if( (XGIbios_mode[xgifb_mode_idx].xres == var->xres) &&
+		    (XGIbios_mode[xgifb_mode_idx].yres == var->yres) &&
+		    (XGIbios_mode[xgifb_mode_idx].bpp == var->bits_per_pixel)) {
+			XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+			found_mode = 1;
+			break;
+		}
+		xgifb_mode_idx++;
+	}
+
+	if(found_mode)
+		xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+	else
+		xgifb_mode_idx = -1;
+
+       	if(xgifb_mode_idx < 0) {
+		printk(KERN_ERR "XGIfb: Mode %dx%dx%d not supported\n", var->xres,
+		       var->yres, var->bits_per_pixel);
+		xgifb_mode_idx = old_mode;
+		return -EINVAL;
+	}
+
+	if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0) {
+		XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+		xgi_video_info.refresh_rate = 60;
+	}
+
+	if(isactive) {
+
+
+		XGIfb_pre_setmode();
+		if(XGISetModeNew( &XGIhw_ext, XGIfb_mode_no) == 0) {
+			printk(KERN_ERR "XGIfb: Setting mode[0x%x] failed\n", XGIfb_mode_no);
+			return -EINVAL;
+		}
+	info->fix.line_length = ((info->var.xres_virtual * info->var.bits_per_pixel)>>6);
+
+	outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+
+		outXGIIDXREG(XGICR,0x13,(info->fix.line_length & 0x00ff));
+		outXGIIDXREG(XGISR,0x0E,(info->fix.line_length & 0xff00)>>8);
+
+		XGIfb_post_setmode();
+
+		DPRINTK("XGIfb: Set new mode: %dx%dx%d-%d \n",
+			XGIbios_mode[xgifb_mode_idx].xres,
+			XGIbios_mode[xgifb_mode_idx].yres,
+			XGIbios_mode[xgifb_mode_idx].bpp,
+			xgi_video_info.refresh_rate);
+
+		xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+		xgi_video_info.video_vwidth = info->var.xres_virtual;
+		xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+		xgi_video_info.video_vheight = info->var.yres_virtual;
+		xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+		xgi_video_info.org_x = xgi_video_info.org_y = 0;
+		xgi_video_info.video_linelength = info->var.xres_virtual * (xgi_video_info.video_bpp >> 3);
+		xgi_video_info.accel = 0;
+		if(XGIfb_accel) {
+		   xgi_video_info.accel = (var->accel_flags & FB_ACCELF_TEXT) ? -1 : 0;
+		}
+		switch(xgi_video_info.video_bpp)
+		{
+        	case 8:
+           		xgi_video_info.DstColor = 0x0000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00000000;
+ 			    xgi_video_info.video_cmap_len = 256;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, (cr_data & 0xE0));
+#endif
+                break;
+        	case 16:
+            	xgi_video_info.DstColor = 0x8000;
+            	xgi_video_info.XGI310_AccelDepth = 0x00010000;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x0B));
+#endif
+			    xgi_video_info.video_cmap_len = 16;
+            	break;
+        	case 32:
+            	xgi_video_info.DstColor = 0xC000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00020000;
+			    xgi_video_info.video_cmap_len = 16;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x15));
+#endif
+            	break;
+		    default:
+			    xgi_video_info.video_cmap_len = 16;
+		        printk(KERN_ERR "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+			    xgi_video_info.accel = 0;
+			    break;
+    	}
+	}
+	XGIfb_bpp_to_var(var); /*update ARGB info*/
+	DEBUGPRN("End of do_set_var");
+
+	dumpVGAReg();
+	return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_var(struct fb_var_screeninfo *var)
+{
+	unsigned int base;
+
+//	printk("Inside pan_var");
+
+	if (var->xoffset > (var->xres_virtual - var->xres)) {
+//	        printk( "Pan: xo: %d xv %d xr %d\n",
+//			var->xoffset, var->xres_virtual, var->xres);
+		return -EINVAL;
+	}
+	if(var->yoffset > (var->yres_virtual - var->yres)) {
+//		printk( "Pan: yo: %d yv %d yr %d\n",
+//			var->yoffset, var->yres_virtual, var->yres);
+		return -EINVAL;
+	}
+        base = var->yoffset * var->xres_virtual + var->xoffset;
+
+        /* calculate base bpp dep. */
+        switch(var->bits_per_pixel) {
+        case 16:
+        	base >>= 1;
+        	break;
+	case 32:
+            	break;
+	case 8:
+        default:
+        	base >>= 2;
+            	break;
+        }
+
+	outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+        outXGIIDXREG(XGICR, 0x0D, base & 0xFF);
+	outXGIIDXREG(XGICR, 0x0C, (base >> 8) & 0xFF);
+	outXGIIDXREG(XGISR, 0x0D, (base >> 16) & 0xFF);
+        outXGIIDXREG(XGISR, 0x37, (base >> 24) & 0x03);
+	setXGIIDXREG(XGISR, 0x37, 0xDF, (base >> 21) & 0x04);
+
+        if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+		orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+        	outXGIIDXREG(XGIPART1, 0x06, (base & 0xFF));
+        	outXGIIDXREG(XGIPART1, 0x05, ((base >> 8) & 0xFF));
+        	outXGIIDXREG(XGIPART1, 0x04, ((base >> 16) & 0xFF));
+		setXGIIDXREG(XGIPART1, 0x02, 0x7F, ((base >> 24) & 0x01) << 7);
+        }
+//	printk("End of pan_var");
+	return 0;
+}
+#endif
+
+
+void XGI_dispinfo(struct ap_data *rec)
+{
+	rec->minfo.bpp    = xgi_video_info.video_bpp;
+	rec->minfo.xres   = xgi_video_info.video_width;
+	rec->minfo.yres   = xgi_video_info.video_height;
+	rec->minfo.v_xres = xgi_video_info.video_vwidth;
+	rec->minfo.v_yres = xgi_video_info.video_vheight;
+	rec->minfo.org_x  = xgi_video_info.org_x;
+	rec->minfo.org_y  = xgi_video_info.org_y;
+	rec->minfo.vrate  = xgi_video_info.refresh_rate;
+	rec->iobase       = xgi_video_info.vga_base - 0x30;
+	rec->mem_size     = xgi_video_info.video_size;
+	rec->disp_state   = xgi_video_info.disp_state;
+	rec->version      = (VER_MAJOR << 24) | (VER_MINOR << 16) | VER_LEVEL;
+	rec->hasVB        = xgi_video_info.hasVB;
+	rec->TV_type      = xgi_video_info.TV_type;
+	rec->TV_plug      = xgi_video_info.TV_plug;
+	rec->chip         = xgi_video_info.chip;
+}
+
+
+
+
+static int XGIfb_open(struct fb_info *info, int user)
+{
+    return 0;
+}
+
+static int XGIfb_release(struct fb_info *info, int user)
+{
+    return 0;
+}
+
+static int XGIfb_get_cmap_len(const struct fb_var_screeninfo *var)
+{
+	int rc = 16;
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		rc = 256;
+		break;
+	case 16:
+		rc = 16;
+		break;
+	case 32:
+		rc = 16;
+		break;
+	}
+	return rc;
+}
+
+static int XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
+                           unsigned transp, struct fb_info *info)
+{
+	if (regno >= XGIfb_get_cmap_len(&info->var))
+		return 1;
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+	        outXGIREG(XGIDACA, regno);
+		outXGIREG(XGIDACD, (red >> 10));
+		outXGIREG(XGIDACD, (green >> 10));
+		outXGIREG(XGIDACD, (blue >> 10));
+		if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+		        outXGIREG(XGIDAC2A, regno);
+			outXGIREG(XGIDAC2D, (red >> 8));
+			outXGIREG(XGIDAC2D, (green >> 8));
+			outXGIREG(XGIDAC2D, (blue >> 8));
+		}
+		break;
+	case 16:
+		((u32 *)(info->pseudo_palette))[regno] =
+		    ((red & 0xf800)) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+		break;
+	case 32:
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+		((u32 *) (info->pseudo_palette))[regno] =
+			(red << 16) | (green << 8) | (blue);
+		break;
+	}
+	return 0;
+}
+
+static int XGIfb_set_par(struct fb_info *info)
+{
+	int err;
+
+//	printk("XGIfb: inside set_par\n");
+        if((err = XGIfb_do_set_var(&info->var, 1, info)))
+		return err;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+	XGIfb_get_fix(&info->fix, info->currcon, info);
+#else
+	XGIfb_get_fix(&info->fix, -1, info);
+#endif
+//	printk("XGIfb:end of set_par\n");
+	return 0;
+}
+
+static int XGIfb_check_var(struct fb_var_screeninfo *var,
+                           struct fb_info *info)
+{
+	unsigned int htotal =
+		var->left_margin + var->xres + var->right_margin +
+		var->hsync_len;
+	unsigned int vtotal = 0;
+	unsigned int drate = 0, hrate = 0;
+	int found_mode = 0;
+	int refresh_rate, search_idx;
+
+	DEBUGPRN("Inside check_var");
+
+	if((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) {
+		vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+		vtotal <<= 1;
+	} else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+		vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+		vtotal <<= 2;
+	} else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		vtotal = var->upper_margin + (var->yres/2) + var->lower_margin +
+		         var->vsync_len;
+	} else 	vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+
+	if(!(htotal) || !(vtotal)) {
+		XGIFAIL("XGIfb: no valid timing data");
+	}
+
+
+        if(var->pixclock && htotal && vtotal) {
+                drate = 1000000000 / var->pixclock;
+                hrate = (drate * 1000) / htotal;
+                xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+	printk(KERN_DEBUG \
+		"%s: pixclock = %d ,htotal=%d, vtotal=%d\n" \
+		"%s: drate=%d, hrate=%d, refresh_rate=%d\n",
+		__func__,var->pixclock, htotal, vtotal,
+		__func__, drate, hrate, xgi_video_info.refresh_rate);
+        } else {
+                xgi_video_info.refresh_rate = 60;
+        }
+
+/*
+	if((var->pixclock) && (htotal)) {
+	   drate = 1E12 / var->pixclock;
+	   hrate = drate / htotal;
+	   refresh_rate = (unsigned int) (hrate / vtotal * 2 + 0.5);
+	} else refresh_rate = 60;
+*/
+	/* TW: Calculation wrong for 1024x600 - force it to 60Hz */
+	if((var->xres == 1024) && (var->yres == 600)) refresh_rate = 60;
+
+	search_idx = 0;
+	while((XGIbios_mode[search_idx].mode_no != 0) &&
+	       (XGIbios_mode[search_idx].xres <= var->xres) ) {
+	    if((XGIbios_mode[search_idx].xres == var->xres) &&
+	       (XGIbios_mode[search_idx].yres == var->yres) &&
+		    (XGIbios_mode[search_idx].bpp == var->bits_per_pixel)) {
+		        if(XGIfb_validate_mode(search_idx) > 0) {
+		    found_mode = 1;
+		    break;
+	        }
+	    }
+		search_idx++;
+	}
+
+	if(!found_mode) {
+
+		printk(KERN_ERR "XGIfb: %dx%dx%d is no valid mode\n",
+			var->xres, var->yres, var->bits_per_pixel);
+
+                search_idx = 0;
+		while(XGIbios_mode[search_idx].mode_no != 0) {
+
+		   if( (var->xres <= XGIbios_mode[search_idx].xres) &&
+		       (var->yres <= XGIbios_mode[search_idx].yres) &&
+		       (var->bits_per_pixel == XGIbios_mode[search_idx].bpp) ) {
+		          if(XGIfb_validate_mode(search_idx) > 0) {
+			     found_mode = 1;
+			     break;
+			  }
+		   }
+		   search_idx++;
+	        }
+		if(found_mode) {
+			var->xres = XGIbios_mode[search_idx].xres;
+		      	var->yres = XGIbios_mode[search_idx].yres;
+		      	printk(KERN_DEBUG "XGIfb: Adapted to mode %dx%dx%d\n",
+		   		var->xres, var->yres, var->bits_per_pixel);
+
+		} else {
+		   	printk(KERN_ERR "XGIfb: Failed to find similar mode to %dx%dx%d\n",
+				var->xres, var->yres, var->bits_per_pixel);
+		   	return -EINVAL;
+		}
+	}
+
+	/* TW: TODO: Check the refresh rate */
+
+	/* Adapt RGB settings */
+	XGIfb_bpp_to_var(var);
+
+	/* Sanity check for offsets */
+	if (var->xoffset < 0)
+		var->xoffset = 0;
+	if (var->yoffset < 0)
+		var->yoffset = 0;
+
+
+	if(!XGIfb_ypan) {
+		if(var->xres != var->xres_virtual)
+			 var->xres_virtual = var->xres;
+		if(var->yres != var->yres_virtual)
+			var->yres_virtual = var->yres;
+	}/* else {
+	   // TW: Now patch yres_virtual if we use panning
+	   // May I do this?
+	   var->yres_virtual = xgi_video_info.heapstart / (var->xres * (var->bits_per_pixel >> 3));
+	    if(var->yres_virtual <= var->yres) {
+	    	// TW: Paranoia check
+	        var->yres_virtual = var->yres;
+	    }
+	}*/
+
+	/* Truncate offsets to maximum if too high */
+	if (var->xoffset > var->xres_virtual - var->xres)
+		var->xoffset = var->xres_virtual - var->xres - 1;
+
+	if (var->yoffset > var->yres_virtual - var->yres)
+		var->yoffset = var->yres_virtual - var->yres - 1;
+
+	/* Set everything else to 0 */
+	var->red.msb_right =
+	    var->green.msb_right =
+	    var->blue.msb_right =
+	    var->transp.offset = var->transp.length = var->transp.msb_right = 0;
+
+	DEBUGPRN("end of check_var");
+	return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_display( struct fb_var_screeninfo *var,
+				 struct fb_info* info)
+{
+	int err;
+
+//	printk("\nInside pan_display:");
+
+	if (var->xoffset > (var->xres_virtual - var->xres))
+		return -EINVAL;
+	if (var->yoffset > (var->yres_virtual - var->yres))
+		return -EINVAL;
+
+	if (var->vmode & FB_VMODE_YWRAP) {
+		if (var->yoffset < 0
+		    || var->yoffset >= info->var.yres_virtual
+		    || var->xoffset) return -EINVAL;
+	} else {
+		if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+		    var->yoffset + info->var.yres > info->var.yres_virtual)
+			return -EINVAL;
+	}
+
+	if((err = XGIfb_pan_var(var)) < 0) return err;
+
+	info->var.xoffset = var->xoffset;
+	info->var.yoffset = var->yoffset;
+	if (var->vmode & FB_VMODE_YWRAP)
+		info->var.vmode |= FB_VMODE_YWRAP;
+	else
+		info->var.vmode &= ~FB_VMODE_YWRAP;
+
+//	printk(" End of pan_display");
+	return 0;
+}
+#endif
+
+#if 0
+static int XGIfb_mmap(struct fb_info *info, struct file *file,
+		      struct vm_area_struct *vma)
+{
+	unsigned long start;
+	unsigned long off;
+	u32 len, mmio_off;
+
+	DEBUGPRN("inside mmap");
+	if(vma->vm_pgoff > (~0UL >> PAGE_SHIFT))  return -EINVAL;
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+
+	start = (unsigned long) xgi_video_info.video_base;
+	len = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.video_size);
+	start &= PAGE_MASK;
+#if 0
+	if (off >= len) {
+		off -= len;
+#endif
+	/* By Jake Page: Treat mmap request with offset beyond heapstart
+	 *               as request for mapping the mmio area
+	 */
+	#if 1
+	mmio_off = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.heapstart);
+	if(off >= mmio_off) {
+		off -= mmio_off;
+		if(info->var.accel_flags) return -EINVAL;
+
+		start = (unsigned long) xgi_video_info.mmio_base;
+		len = PAGE_ALIGN((start & ~PAGE_MASK) + XGIfb_mmio_size);
+	}
+	start &= PAGE_MASK;
+	#endif
+	if((vma->vm_end - vma->vm_start + off) > len)	return -EINVAL;
+
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	vma->vm_flags |= VM_IO;   /* by Jake Page; is that really needed? */
+
+#if defined(__i386__) || defined(__x86_64__)
+	if (boot_cpu_data.x86 > 3)
+		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+#endif
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start,
+				vma->vm_page_prot))
+		return -EAGAIN;
+
+        DEBUGPRN("end of mmap");
+	return 0;
+}
+#endif
+static int XGIfb_blank(int blank, struct fb_info *info)
+{
+	u8 reg;
+
+	inXGIIDXREG(XGICR, 0x17, reg);
+
+	if(blank > 0)
+		reg &= 0x7f;
+	else
+		reg |= 0x80;
+
+        outXGIIDXREG(XGICR, 0x17, reg);
+	outXGIIDXREG(XGISR, 0x00, 0x01);    /* Synchronous Reset */
+	outXGIIDXREG(XGISR, 0x00, 0x03);    /* End Reset */
+        return(0);
+}
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+			    unsigned long arg)
+#else
+static int XGIfb_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg,
+		       struct fb_info *info)
+#endif
+
+{
+	DEBUGPRN("inside ioctl");
+	switch (cmd) {
+	   case FBIO_ALLOC:
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		XGI_malloc((struct XGI_memreq *) arg);
+		break;
+	   case FBIO_FREE:
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		XGI_free(*(unsigned long *) arg);
+		break;
+	   case FBIOGET_HWCINFO:
+		{
+			unsigned long *hwc_offset = (unsigned long *) arg;
+
+			if (XGIfb_caps & HW_CURSOR_CAP)
+				*hwc_offset = XGIfb_hwcursor_vbase -
+				    (unsigned long) xgi_video_info.video_vbase;
+			else
+				*hwc_offset = 0;
+
+			break;
+		}
+	   case FBIOPUT_MODEINFO:
+		{
+			struct mode_info *x = (struct mode_info *)arg;
+
+			xgi_video_info.video_bpp        = x->bpp;
+			xgi_video_info.video_width      = x->xres;
+			xgi_video_info.video_height     = x->yres;
+			xgi_video_info.video_vwidth     = x->v_xres;
+			xgi_video_info.video_vheight    = x->v_yres;
+			xgi_video_info.org_x            = x->org_x;
+			xgi_video_info.org_y            = x->org_y;
+			xgi_video_info.refresh_rate     = x->vrate;
+			xgi_video_info.video_linelength = xgi_video_info.video_vwidth * (xgi_video_info.video_bpp >> 3);
+			switch(xgi_video_info.video_bpp) {
+        		case 8:
+            			xgi_video_info.DstColor = 0x0000;
+	    			xgi_video_info.XGI310_AccelDepth = 0x00000000;
+				xgi_video_info.video_cmap_len = 256;
+            			break;
+        		case 16:
+            			xgi_video_info.DstColor = 0x8000;
+            			xgi_video_info.XGI310_AccelDepth = 0x00010000;
+				xgi_video_info.video_cmap_len = 16;
+            			break;
+        		case 32:
+            			xgi_video_info.DstColor = 0xC000;
+	    			xgi_video_info.XGI310_AccelDepth = 0x00020000;
+				xgi_video_info.video_cmap_len = 16;
+            			break;
+			default:
+				xgi_video_info.video_cmap_len = 16;
+		       	 	printk(KERN_ERR "XGIfb: Unsupported accel depth %d", xgi_video_info.video_bpp);
+				xgi_video_info.accel = 0;
+				break;
+    			}
+
+			break;
+		}
+	   case FBIOGET_DISPINFO:
+		XGI_dispinfo((struct ap_data *)arg);
+		break;
+	   case XGIFB_GET_INFO:  /* TW: New for communication with X driver */
+	        {
+			XGIfb_info *x = (XGIfb_info *)arg;
+
+			//x->XGIfb_id = XGIFB_ID;
+			x->XGIfb_version = VER_MAJOR;
+			x->XGIfb_revision = VER_MINOR;
+			x->XGIfb_patchlevel = VER_LEVEL;
+			x->chip_id = xgi_video_info.chip_id;
+			x->memory = xgi_video_info.video_size / 1024;
+			x->heapstart = xgi_video_info.heapstart / 1024;
+			x->fbvidmode = XGIfb_mode_no;
+			x->XGIfb_caps = XGIfb_caps;
+			x->XGIfb_tqlen = 512; /* yet unused */
+			x->XGIfb_pcibus = xgi_video_info.pcibus;
+			x->XGIfb_pcislot = xgi_video_info.pcislot;
+			x->XGIfb_pcifunc = xgi_video_info.pcifunc;
+			x->XGIfb_lcdpdc = XGIfb_detectedpdc;
+			x->XGIfb_lcda = XGIfb_detectedlcda;
+	                break;
+		}
+	   case XGIFB_GET_VBRSTATUS:
+	        {
+			unsigned long *vbrstatus = (unsigned long *) arg;
+			if(XGIfb_CheckVBRetrace()) *vbrstatus = 1;
+			else		           *vbrstatus = 0;
+		}
+	   default:
+		return -EINVAL;
+	}
+	DEBUGPRN("end of ioctl");
+	return 0;
+
+}
+
+
+
+/* ----------- FBDev related routines for all series ---------- */
+
+static int XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+			 struct fb_info *info)
+{
+	DEBUGPRN("inside get_fix");
+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+
+	strcpy(fix->id, myid);
+
+	fix->smem_start = xgi_video_info.video_base;
+
+	fix->smem_len = xgi_video_info.video_size;
+
+
+/*        if((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+	    if (xgi_video_info.video_size > 0x1000000) {
+	        fix->smem_len = 0xD00000;
+	    } else if (xgi_video_info.video_size > 0x800000)
+		fix->smem_len = 0x800000;
+	    else
+		fix->smem_len = 0x400000;
+        } else
+		fix->smem_len = XGIfb_mem * 1024;
+*/
+	fix->type        = video_type;
+	fix->type_aux    = 0;
+	if(xgi_video_info.video_bpp == 8)
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		fix->visual = FB_VISUAL_DIRECTCOLOR;
+	fix->xpanstep    = 0;
+#ifdef XGIFB_PAN
+        if(XGIfb_ypan) 	 fix->ypanstep = 1;
+#endif
+	fix->ywrapstep   = 0;
+	fix->line_length = xgi_video_info.video_linelength;
+	fix->mmio_start  = xgi_video_info.mmio_base;
+	fix->mmio_len    = XGIfb_mmio_size;
+    if(xgi_video_info.chip >= XG40)
+	   fix->accel    = FB_ACCEL_XGI_XABRE;
+	else
+	   fix->accel    = FB_ACCEL_XGI_GLAMOUR_2;
+
+
+	DEBUGPRN("end of get_fix");
+	return 0;
+}
+
+
+static struct fb_ops XGIfb_ops = {
+	.owner        =	THIS_MODULE,
+	.fb_open      = XGIfb_open,
+	.fb_release   = XGIfb_release,
+	.fb_check_var = XGIfb_check_var,
+	.fb_set_par   = XGIfb_set_par,
+	.fb_setcolreg = XGIfb_setcolreg,
+#ifdef XGIFB_PAN
+        .fb_pan_display = XGIfb_pan_display,
+#endif
+        .fb_blank     = XGIfb_blank,
+	.fb_fillrect  = fbcon_XGI_fillrect,
+	.fb_copyarea  = fbcon_XGI_copyarea,
+	.fb_imageblit = cfb_imageblit,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
+	.fb_cursor    = soft_cursor,
+#endif
+	.fb_sync      = fbcon_XGI_sync,
+	.fb_ioctl     =	XGIfb_ioctl,
+//	.fb_mmap      =	XGIfb_mmap,
+};
+
+/* ---------------- Chip generation dependent routines ---------------- */
+
+
+/* for XGI 315/550/650/740/330 */
+
+static int XGIfb_get_dram_size(void)
+{
+
+	u8  ChannelNum,tmp;
+	u8  reg = 0;
+
+	/* xorg driver sets 32MB * 1 channel */
+	if (xgi_video_info.chip == XG27)
+		outXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, 0x51);
+
+	        inXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, reg);
+		switch ((reg & XGI_DRAM_SIZE_MASK) >> 4) {
+		   case XGI_DRAM_SIZE_1MB:
+			xgi_video_info.video_size = 0x100000;
+			break;
+		   case XGI_DRAM_SIZE_2MB:
+			xgi_video_info.video_size = 0x200000;
+			break;
+		   case XGI_DRAM_SIZE_4MB:
+			xgi_video_info.video_size = 0x400000;
+			break;
+		   case XGI_DRAM_SIZE_8MB:
+			xgi_video_info.video_size = 0x800000;
+			break;
+		   case XGI_DRAM_SIZE_16MB:
+			xgi_video_info.video_size = 0x1000000;
+			break;
+		   case XGI_DRAM_SIZE_32MB:
+			xgi_video_info.video_size = 0x2000000;
+			break;
+		   case XGI_DRAM_SIZE_64MB:
+			xgi_video_info.video_size = 0x4000000;
+			break;
+		   case XGI_DRAM_SIZE_128MB:
+			xgi_video_info.video_size = 0x8000000;
+			break;
+		   case XGI_DRAM_SIZE_256MB:
+			xgi_video_info.video_size = 0x10000000;
+			break;
+		   default:
+			return -1;
+		}
+
+		tmp = (reg & 0x0c) >> 2;
+		switch(xgi_video_info.chip)
+		{
+		    case XG20:
+                    case XG21:
+		    case XG27:
+		        ChannelNum = 1;
+		        break;
+
+		    case XG42:
+		        if(reg & 0x04)
+		            ChannelNum = 2;
+		        else
+		            ChannelNum = 1;
+		        break;
+
+		    case XG45:
+		        if(tmp == 1)
+                    ChannelNum = 2;
+                else
+                if(tmp == 2)
+                    ChannelNum = 3;
+                else
+                if(tmp == 3)
+                    ChannelNum = 4;
+                else
+                    ChannelNum = 1;
+		        break;
+
+		    case XG40:
+		    default:
+                if(tmp == 2)
+                    ChannelNum = 2;
+                else
+                if(tmp == 3)
+                    ChannelNum = 3;
+                else
+                    ChannelNum = 1;
+		        break;
+		}
+
+
+		xgi_video_info.video_size = xgi_video_info.video_size * ChannelNum;
+		//PLiad fixed for benchmarking and fb set
+		//xgi_video_info.video_size = 0x200000;//1024x768x16
+		//xgi_video_info.video_size = 0x1000000;//benchmark
+
+		printk("XGIfb: SR14=%x DramSzie %x ChannelNum %x\n",reg,xgi_video_info.video_size ,ChannelNum );
+		return 0;
+
+}
+
+static void XGIfb_detect_VB(void)
+{
+	u8 cr32, temp=0;
+
+	xgi_video_info.TV_plug = xgi_video_info.TV_type = 0;
+
+        switch(xgi_video_info.hasVB) {
+	  case HASVB_LVDS_CHRONTEL:
+	  case HASVB_CHRONTEL:
+	     break;
+	  case HASVB_301:
+	  case HASVB_302:
+//	     XGI_Sense30x(); //Yi-Lin TV Sense?
+	     break;
+	}
+
+	inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR32, cr32);
+
+	if ((cr32 & XGI_CRT1) && !XGIfb_crt1off)
+		XGIfb_crt1off = 0;
+	else {
+		if (cr32 & 0x5F)
+			XGIfb_crt1off = 1;
+		else
+			XGIfb_crt1off = 0;
+	}
+
+	if (XGIfb_crt2type != -1)
+		/* TW: Override with option */
+		xgi_video_info.disp_state = XGIfb_crt2type;
+	else if (cr32 & XGI_VB_TV)
+		xgi_video_info.disp_state = DISPTYPE_TV;
+	else if (cr32 & XGI_VB_LCD)
+		xgi_video_info.disp_state = DISPTYPE_LCD;
+	else if (cr32 & XGI_VB_CRT2)
+		xgi_video_info.disp_state = DISPTYPE_CRT2;
+	else
+		xgi_video_info.disp_state = 0;
+
+	if(XGIfb_tvplug != -1)
+		/* PR/TW: Override with option */
+	        xgi_video_info.TV_plug = XGIfb_tvplug;
+	else if (cr32 & XGI_VB_HIVISION) {
+		xgi_video_info.TV_type = TVMODE_HIVISION;
+		xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	}
+	else if (cr32 & XGI_VB_SVIDEO)
+		xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	else if (cr32 & XGI_VB_COMPOSITE)
+		xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+	else if (cr32 & XGI_VB_SCART)
+		xgi_video_info.TV_plug = TVPLUG_SCART;
+
+	if(xgi_video_info.TV_type == 0) {
+	    /* TW: PAL/NTSC changed for 650 */
+	    if((xgi_video_info.chip <= XGI_315PRO) || (xgi_video_info.chip >= XGI_330)) {
+
+                inXGIIDXREG(XGICR, 0x38, temp);
+		if(temp & 0x10)
+			xgi_video_info.TV_type = TVMODE_PAL;
+		else
+			xgi_video_info.TV_type = TVMODE_NTSC;
+
+	    } else {
+
+	        inXGIIDXREG(XGICR, 0x79, temp);
+		if(temp & 0x20)
+			xgi_video_info.TV_type = TVMODE_PAL;
+		else
+			xgi_video_info.TV_type = TVMODE_NTSC;
+	    }
+	}
+
+	/* TW: Copy forceCRT1 option to CRT1off if option is given */
+    	if (XGIfb_forcecrt1 != -1) {
+    		if (XGIfb_forcecrt1) XGIfb_crt1off = 0;
+		else   	             XGIfb_crt1off = 1;
+    	}
+}
+
+static void XGIfb_get_VB_type(void)
+{
+	u8 reg;
+
+	if (!XGIfb_has_VB()) {
+	        inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR37, reg);
+		switch ((reg & XGI_EXTERNAL_CHIP_MASK) >> 1) {
+	 	   case XGI310_EXTERNAL_CHIP_LVDS:
+			xgi_video_info.hasVB = HASVB_LVDS;
+			break;
+		   case XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL:
+			xgi_video_info.hasVB = HASVB_LVDS_CHRONTEL;
+			break;
+		   default:
+			break;
+		}
+	}
+}
+
+
+static int XGIfb_has_VB(void)
+{
+	u8 vb_chipid;
+
+	inXGIIDXREG(XGIPART4, 0x00, vb_chipid);
+	switch (vb_chipid) {
+	   case 0x01:
+		xgi_video_info.hasVB = HASVB_301;
+		break;
+	   case 0x02:
+		xgi_video_info.hasVB = HASVB_302;
+		break;
+	   default:
+		xgi_video_info.hasVB = HASVB_NONE;
+		return FALSE;
+	}
+	return TRUE;
+}
+
+
+
+/* ------------------ Sensing routines ------------------ */
+
+/* TW: Determine and detect attached devices on XGI30x */
+int
+XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch)
+{
+    int temp,i;
+
+    outXGIIDXREG(XGIPART4,0x11,tempbl);
+    temp = tempbh | tempcl;
+    setXGIIDXREG(XGIPART4,0x10,0xe0,temp);
+    for(i=0; i<10; i++) XGI_LongWait(&XGI_Pr);
+    tempch &= 0x7f;
+    inXGIIDXREG(XGIPART4,0x03,temp);
+    temp ^= 0x0e;
+    temp &= tempch;
+    return(temp);
+}
+
+void
+XGI_Sense30x(void)
+{
+  u8 backupP4_0d;
+  u8 testsvhs_tempbl, testsvhs_tempbh;
+  u8 testsvhs_tempcl, testsvhs_tempch;
+  u8 testcvbs_tempbl, testcvbs_tempbh;
+  u8 testcvbs_tempcl, testcvbs_tempch;
+  u8 testvga2_tempbl, testvga2_tempbh;
+  u8 testvga2_tempcl, testvga2_tempch;
+  int myflag, result;
+
+  inXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+  outXGIIDXREG(XGIPART4,0x0d,(backupP4_0d | 0x04));
+
+
+
+	testvga2_tempbh = 0x00; testvga2_tempbl = 0xd1;
+        testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xb9;
+	testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xb3;
+	if((XGIhw_ext.ujVBChipID != VB_CHIP_301) &&
+	   (XGIhw_ext.ujVBChipID != VB_CHIP_302)) {
+	      testvga2_tempbh = 0x01; testvga2_tempbl = 0x90;
+	      testsvhs_tempbh = 0x01; testsvhs_tempbl = 0x6b;
+	      testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x74;
+	      if(XGIhw_ext.ujVBChipID == VB_CHIP_301LV ||
+	         XGIhw_ext.ujVBChipID == VB_CHIP_302LV) {
+	         testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+	         testsvhs_tempbh = 0x02; testsvhs_tempbl = 0x00;
+	         testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x00;
+	      }
+	}
+	if(XGIhw_ext.ujVBChipID != VB_CHIP_301LV &&
+	   XGIhw_ext.ujVBChipID != VB_CHIP_302LV) {
+	   inXGIIDXREG(XGIPART4,0x01,myflag);
+	   if(myflag & 0x04) {
+	      testvga2_tempbh = 0x00; testvga2_tempbl = 0xfd;
+	      testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xdd;
+	      testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xee;
+	   }
+	}
+	if((XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+	   (XGIhw_ext.ujVBChipID == VB_CHIP_302LV) ) {
+	   testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+	   testvga2_tempch = 0x00; testvga2_tempcl = 0x00;
+	   testsvhs_tempch = 0x04; testsvhs_tempcl = 0x08;
+	   testcvbs_tempch = 0x08; testcvbs_tempcl = 0x08;
+	} else {
+	   testvga2_tempch = 0x0e; testvga2_tempcl = 0x08;
+	   testsvhs_tempch = 0x06; testsvhs_tempcl = 0x04;
+	   testcvbs_tempch = 0x08; testcvbs_tempcl = 0x04;
+	}
+
+
+    if(testvga2_tempch || testvga2_tempcl || testvga2_tempbh || testvga2_tempbl) {
+        result = XGIDoSense(testvga2_tempbl, testvga2_tempbh,
+                            testvga2_tempcl, testvga2_tempch);
+ 	if(result) {
+        	printk(KERN_INFO "XGIfb: Detected secondary VGA connection\n");
+		orXGIIDXREG(XGICR, 0x32, 0x10);
+	}
+    }
+
+    result = XGIDoSense(testsvhs_tempbl, testsvhs_tempbh,
+                        testsvhs_tempcl, testsvhs_tempch);
+    if(result) {
+        printk(KERN_INFO "XGIfb: Detected TV connected to SVHS output\n");
+        /* TW: So we can be sure that there IS a SVHS output */
+	xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	orXGIIDXREG(XGICR, 0x32, 0x02);
+    }
+
+    if(!result) {
+        result = XGIDoSense(testcvbs_tempbl, testcvbs_tempbh,
+	                    testcvbs_tempcl, testcvbs_tempch);
+	if(result) {
+	    printk(KERN_INFO "XGIfb: Detected TV connected to CVBS output\n");
+	    /* TW: So we can be sure that there IS a CVBS output */
+	    xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+	    orXGIIDXREG(XGICR, 0x32, 0x01);
+	}
+    }
+    XGIDoSense(0, 0, 0, 0);
+
+    outXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+}
+
+
+
+/* ------------------------ Heap routines -------------------------- */
+
+static int XGIfb_heap_init(void)
+{
+	XGI_OH *poh;
+	u8 temp=0;
+
+	int            agp_enabled = 1;
+	u32            agp_size;
+	unsigned long *cmdq_baseport = 0;
+	unsigned long *read_port = 0;
+	unsigned long *write_port = 0;
+	XGI_CMDTYPE    cmd_type;
+#ifndef AGPOFF
+	struct agp_kern_info  *agp_info;
+	struct agp_memory     *agp;
+	u32            agp_phys;
+#endif
+
+/* TW: The heap start is either set manually using the "mem" parameter, or
+ *     defaults as follows:
+ *     -) If more than 16MB videoRAM available, let our heap start at 12MB.
+ *     -) If more than  8MB videoRAM available, let our heap start at  8MB.
+ *     -) If 4MB or less is available, let it start at 4MB.
+ *     This is for avoiding a clash with X driver which uses the beginning
+ *     of the videoRAM. To limit size of X framebuffer, use Option MaxXFBMem
+ *     in XF86Config-4.
+ *     The heap start can also be specified by parameter "mem" when starting the XGIfb
+ *     driver. XGIfb mem=1024 lets heap starts at 1MB, etc.
+ */
+     if ((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+        if (xgi_video_info.video_size > 0x1000000) {
+	        xgi_video_info.heapstart = 0xD00000;
+	} else if (xgi_video_info.video_size > 0x800000) {
+	        xgi_video_info.heapstart = 0x800000;
+	} else {
+		xgi_video_info.heapstart = 0x400000;
+	}
+     } else {
+           xgi_video_info.heapstart = XGIfb_mem * 1024;
+     }
+     XGIfb_heap_start =
+	       (unsigned long) (xgi_video_info.video_vbase + xgi_video_info.heapstart);
+     printk(KERN_INFO "XGIfb: Memory heap starting at %dK\n",
+     					(int)(xgi_video_info.heapstart / 1024));
+
+     XGIfb_heap_end = (unsigned long) xgi_video_info.video_vbase + xgi_video_info.video_size;
+     XGIfb_heap_size = XGIfb_heap_end - XGIfb_heap_start;
+
+
+
+        /* TW: Now initialize the 310 series' command queue mode.
+	 * On 310/325, there are three queue modes available which
+	 * are chosen by setting bits 7:5 in SR26:
+	 * 1. MMIO queue mode (bit 5, 0x20). The hardware will keep
+	 *    track of the queue, the FIFO, command parsing and so
+	 *    on. This is the one comparable to the 300 series.
+	 * 2. VRAM queue mode (bit 6, 0x40). In this case, one will
+	 *    have to do queue management himself. Register 0x85c4 will
+	 *    hold the location of the next free queue slot, 0x85c8
+	 *    is the "queue read pointer" whose way of working is
+	 *    unknown to me. Anyway, this mode would require a
+	 *    translation of the MMIO commands to some kind of
+	 *    accelerator assembly and writing these commands
+	 *    to the memory location pointed to by 0x85c4.
+	 *    We will not use this, as nobody knows how this
+	 *    "assembly" works, and as it would require a complete
+	 *    re-write of the accelerator code.
+	 * 3. AGP queue mode (bit 7, 0x80). Works as 2., but keeps the
+	 *    queue in AGP memory space.
+	 *
+	 * SR26 bit 4 is called "Bypass H/W queue".
+	 * SR26 bit 1 is called "Enable Command Queue Auto Correction"
+	 * SR26 bit 0 resets the queue
+	 * Size of queue memory is encoded in bits 3:2 like this:
+	 *    00  (0x00)  512K
+	 *    01  (0x04)  1M
+	 *    10  (0x08)  2M
+	 *    11  (0x0C)  4M
+	 * The queue location is to be written to 0x85C0.
+	 *
+         */
+	cmdq_baseport = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_PHYBASE);
+	write_port    = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_WRITEPORT);
+	read_port     = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_READPORT);
+
+	DPRINTK("AGP base: 0x%p, read: 0x%p, write: 0x%p\n", cmdq_baseport, read_port, write_port);
+
+	agp_size  = COMMAND_QUEUE_AREA_SIZE;
+
+#ifndef AGPOFF
+	if (XGIfb_queuemode == AGP_CMD_QUEUE) {
+		agp_info = vmalloc(sizeof(*agp_info));
+		memset((void*)agp_info, 0x00, sizeof(*agp_info));
+		agp_copy_info(agp_info);
+
+		agp_backend_acquire();
+
+		agp = agp_allocate_memory(COMMAND_QUEUE_AREA_SIZE/PAGE_SIZE,
+					  AGP_NORMAL_MEMORY);
+		if (agp == NULL) {
+			DPRINTK("XGIfb: Allocating AGP buffer failed.\n");
+			agp_enabled = 0;
+		} else {
+			if (agp_bind_memory(agp, agp->pg_start) != 0) {
+				DPRINTK("XGIfb: AGP: Failed to bind memory\n");
+				/* TODO: Free AGP memory here */
+				agp_enabled = 0;
+			} else {
+				agp_enable(0);
+			}
+		}
+	}
+#else
+	agp_enabled = 0;
+#endif
+
+	/* TW: Now select the queue mode */
+
+	if ((agp_enabled) && (XGIfb_queuemode == AGP_CMD_QUEUE)) {
+		cmd_type = AGP_CMD_QUEUE;
+		printk(KERN_INFO "XGIfb: Using AGP queue mode\n");
+/*	} else if (XGIfb_heap_size >= COMMAND_QUEUE_AREA_SIZE)  */
+        } else if (XGIfb_queuemode == VM_CMD_QUEUE) {
+		cmd_type = VM_CMD_QUEUE;
+		printk(KERN_INFO "XGIfb: Using VRAM queue mode\n");
+	} else {
+		printk(KERN_INFO "XGIfb: Using MMIO queue mode\n");
+		cmd_type = MMIO_CMD;
+	}
+
+	switch (agp_size) {
+	   case 0x80000:
+		temp = XGI_CMD_QUEUE_SIZE_512k;
+		break;
+	   case 0x100000:
+		temp = XGI_CMD_QUEUE_SIZE_1M;
+		break;
+	   case 0x200000:
+		temp = XGI_CMD_QUEUE_SIZE_2M;
+		break;
+	   case 0x400000:
+		temp = XGI_CMD_QUEUE_SIZE_4M;
+		break;
+	}
+
+	switch (cmd_type) {
+	   case AGP_CMD_QUEUE:
+#ifndef AGPOFF
+		DPRINTK("XGIfb: AGP buffer base = 0x%lx, offset = 0x%x, size = %dK\n",
+			agp_info->aper_base, agp->physical, agp_size/1024);
+
+		agp_phys = agp_info->aper_base + agp->physical;
+
+		outXGIIDXREG(XGICR,  IND_XGI_AGP_IO_PAD, 0);
+		outXGIIDXREG(XGICR,  IND_XGI_AGP_IO_PAD, XGI_AGP_2X);
+
+                outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+		*write_port = *read_port;
+
+		temp |= XGI_AGP_CMDQUEUE_ENABLE;
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+		*cmdq_baseport = agp_phys;
+
+		XGIfb_caps |= AGP_CMD_QUEUE_CAP;
+#endif
+		break;
+
+	   case VM_CMD_QUEUE:
+		XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+		XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+		*write_port = *read_port;
+
+		temp |= XGI_VRAM_CMDQUEUE_ENABLE;
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+		*cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+
+		XGIfb_caps |= VM_CMD_QUEUE_CAP;
+
+		DPRINTK("XGIfb: VM Cmd Queue offset = 0x%lx, size is %dK\n",
+			*cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+		break;
+
+	   default:  /* MMIO */
+
+//		printk("%s:%d - I'm here\n", __FUNCTION__, __LINE__);
+	   	/* TW: This previously only wrote XGI_MMIO_CMD_ENABLE
+		 * to IND_XGI_CMDQUEUE_SET. I doubt that this is
+		 * enough. Reserve memory in any way.
+		 */
+// FIXME 	   	XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME 		XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME 		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+// FIXME 		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+// FIXME
+// FIXME 		*write_port = *read_port;
+// FIXME
+// FIXME 		/* TW: Set Auto_Correction bit */
+// FIXME 		temp |= (XGI_MMIO_CMD_ENABLE | XGI_CMD_AUTO_CORR);
+// FIXME 		// FIXME outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+// FIXME
+// FIXME 		*cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME 		XGIfb_caps |= MMIO_CMD_QUEUE_CAP;
+// FIXME
+// FIXME 		DPRINTK("XGIfb: MMIO Cmd Queue offset = 0x%lx, size is %dK\n",
+// FIXME 			*cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+		break;
+	}
+
+
+
+
+     /* TW: Now reserve memory for the HWCursor. It is always located at the very
+            top of the videoRAM, right below the TB memory area (if used). */
+     if (XGIfb_heap_size >= XGIfb_hwcursor_size) {
+		XGIfb_heap_end -= XGIfb_hwcursor_size;
+		XGIfb_heap_size -= XGIfb_hwcursor_size;
+		XGIfb_hwcursor_vbase = XGIfb_heap_end;
+
+		XGIfb_caps |= HW_CURSOR_CAP;
+
+		DPRINTK("XGIfb: Hardware Cursor start at 0x%lx, size is %dK\n",
+			XGIfb_heap_end, XGIfb_hwcursor_size/1024);
+     }
+
+     XGIfb_heap.poha_chain = NULL;
+     XGIfb_heap.poh_freelist = NULL;
+
+     poh = XGIfb_poh_new_node();
+
+     if(poh == NULL)  return 1;
+
+     poh->poh_next = &XGIfb_heap.oh_free;
+     poh->poh_prev = &XGIfb_heap.oh_free;
+     poh->size = XGIfb_heap_end - XGIfb_heap_start + 1;
+     poh->offset = XGIfb_heap_start - (unsigned long) xgi_video_info.video_vbase;
+
+     DPRINTK("XGIfb: Heap start:0x%p, end:0x%p, len=%dk\n",
+		(char *) XGIfb_heap_start, (char *) XGIfb_heap_end,
+		(unsigned int) poh->size / 1024);
+
+     DPRINTK("XGIfb: First Node offset:0x%x, size:%dk\n",
+		(unsigned int) poh->offset, (unsigned int) poh->size / 1024);
+
+     XGIfb_heap.oh_free.poh_next = poh;
+     XGIfb_heap.oh_free.poh_prev = poh;
+     XGIfb_heap.oh_free.size = 0;
+     XGIfb_heap.max_freesize = poh->size;
+
+     XGIfb_heap.oh_used.poh_next = &XGIfb_heap.oh_used;
+     XGIfb_heap.oh_used.poh_prev = &XGIfb_heap.oh_used;
+     XGIfb_heap.oh_used.size = SENTINEL;
+
+     return 0;
+}
+
+static XGI_OH *XGIfb_poh_new_node(void)
+{
+	int           i;
+	unsigned long cOhs;
+	XGI_OHALLOC   *poha;
+	XGI_OH        *poh;
+
+	if (XGIfb_heap.poh_freelist == NULL) {
+		poha = kmalloc(OH_ALLOC_SIZE, GFP_KERNEL);
+		if(!poha) return NULL;
+
+		poha->poha_next = XGIfb_heap.poha_chain;
+		XGIfb_heap.poha_chain = poha;
+
+		cOhs = (OH_ALLOC_SIZE - sizeof(XGI_OHALLOC)) / sizeof(XGI_OH) + 1;
+
+		poh = &poha->aoh[0];
+		for (i = cOhs - 1; i != 0; i--) {
+			poh->poh_next = poh + 1;
+			poh = poh + 1;
+		}
+
+		poh->poh_next = NULL;
+		XGIfb_heap.poh_freelist = &poha->aoh[0];
+	}
+
+	poh = XGIfb_heap.poh_freelist;
+	XGIfb_heap.poh_freelist = poh->poh_next;
+
+	return (poh);
+}
+
+static XGI_OH *XGIfb_poh_allocate(unsigned long size)
+{
+	XGI_OH *pohThis;
+	XGI_OH *pohRoot;
+	int     bAllocated = 0;
+
+	if (size > XGIfb_heap.max_freesize) {
+		DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+			(unsigned int) size / 1024);
+		return (NULL);
+	}
+
+	pohThis = XGIfb_heap.oh_free.poh_next;
+
+	while (pohThis != &XGIfb_heap.oh_free) {
+		if (size <= pohThis->size) {
+			bAllocated = 1;
+			break;
+		}
+		pohThis = pohThis->poh_next;
+	}
+
+	if (!bAllocated) {
+		DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+			(unsigned int) size / 1024);
+		return (NULL);
+	}
+
+	if (size == pohThis->size) {
+		pohRoot = pohThis;
+		XGIfb_delete_node(pohThis);
+	} else {
+		pohRoot = XGIfb_poh_new_node();
+
+		if (pohRoot == NULL) {
+			return (NULL);
+		}
+
+		pohRoot->offset = pohThis->offset;
+		pohRoot->size = size;
+
+		pohThis->offset += size;
+		pohThis->size -= size;
+	}
+
+	XGIfb_heap.max_freesize -= size;
+
+	pohThis = &XGIfb_heap.oh_used;
+	XGIfb_insert_node(pohThis, pohRoot);
+
+	return (pohRoot);
+}
+
+static void XGIfb_delete_node(XGI_OH *poh)
+{
+	XGI_OH *poh_prev;
+	XGI_OH *poh_next;
+
+	poh_prev = poh->poh_prev;
+	poh_next = poh->poh_next;
+
+	poh_prev->poh_next = poh_next;
+	poh_next->poh_prev = poh_prev;
+
+}
+
+static void XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh)
+{
+	XGI_OH *pohTemp;
+
+	pohTemp = pohList->poh_next;
+
+	pohList->poh_next = poh;
+	pohTemp->poh_prev = poh;
+
+	poh->poh_prev = pohList;
+	poh->poh_next = pohTemp;
+}
+
+static XGI_OH *XGIfb_poh_free(unsigned long base)
+{
+	XGI_OH *pohThis;
+	XGI_OH *poh_freed;
+	XGI_OH *poh_prev;
+	XGI_OH *poh_next;
+	unsigned long ulUpper;
+	unsigned long ulLower;
+	int foundNode = 0;
+
+	poh_freed = XGIfb_heap.oh_used.poh_next;
+
+	while(poh_freed != &XGIfb_heap.oh_used) {
+		if(poh_freed->offset == base) {
+			foundNode = 1;
+			break;
+		}
+
+		poh_freed = poh_freed->poh_next;
+	}
+
+	if (!foundNode)  return (NULL);
+
+	XGIfb_heap.max_freesize += poh_freed->size;
+
+	poh_prev = poh_next = NULL;
+	ulUpper = poh_freed->offset + poh_freed->size;
+	ulLower = poh_freed->offset;
+
+	pohThis = XGIfb_heap.oh_free.poh_next;
+
+	while (pohThis != &XGIfb_heap.oh_free) {
+		if (pohThis->offset == ulUpper) {
+			poh_next = pohThis;
+		}
+			else if ((pohThis->offset + pohThis->size) ==
+				 ulLower) {
+			poh_prev = pohThis;
+		}
+		pohThis = pohThis->poh_next;
+	}
+
+	XGIfb_delete_node(poh_freed);
+
+	if (poh_prev && poh_next) {
+		poh_prev->size += (poh_freed->size + poh_next->size);
+		XGIfb_delete_node(poh_next);
+		XGIfb_free_node(poh_freed);
+		XGIfb_free_node(poh_next);
+		return (poh_prev);
+	}
+
+	if (poh_prev) {
+		poh_prev->size += poh_freed->size;
+		XGIfb_free_node(poh_freed);
+		return (poh_prev);
+	}
+
+	if (poh_next) {
+		poh_next->size += poh_freed->size;
+		poh_next->offset = poh_freed->offset;
+		XGIfb_free_node(poh_freed);
+		return (poh_next);
+	}
+
+	XGIfb_insert_node(&XGIfb_heap.oh_free, poh_freed);
+
+	return (poh_freed);
+}
+
+static void XGIfb_free_node(XGI_OH *poh)
+{
+	if(poh == NULL) return;
+
+	poh->poh_next = XGIfb_heap.poh_freelist;
+	XGIfb_heap.poh_freelist = poh;
+
+}
+
+void XGI_malloc(struct XGI_memreq *req)
+{
+	XGI_OH *poh;
+
+	poh = XGIfb_poh_allocate(req->size);
+
+	if(poh == NULL) {
+		req->offset = 0;
+		req->size = 0;
+		DPRINTK("XGIfb: Video RAM allocation failed\n");
+	} else {
+		DPRINTK("XGIfb: Video RAM allocation succeeded: 0x%p\n",
+			(char *) (poh->offset + (unsigned long) xgi_video_info.video_vbase));
+
+		req->offset = poh->offset;
+		req->size = poh->size;
+	}
+
+}
+
+void XGI_free(unsigned long base)
+{
+	XGI_OH *poh;
+
+	poh = XGIfb_poh_free(base);
+
+	if(poh == NULL) {
+		DPRINTK("XGIfb: XGIfb_poh_free() failed at base 0x%x\n",
+			(unsigned int) base);
+	}
+}
+
+/* --------------------- SetMode routines ------------------------- */
+
+static void XGIfb_pre_setmode(void)
+{
+	u8 cr30 = 0, cr31 = 0;
+
+	inXGIIDXREG(XGICR, 0x31, cr31);
+	cr31 &= ~0x60;
+
+	switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+	   case DISPTYPE_CRT2:
+		cr30 = (XGI_VB_OUTPUT_CRT2 | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+		break;
+	   case DISPTYPE_LCD:
+		cr30  = (XGI_VB_OUTPUT_LCD | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+		break;
+	   case DISPTYPE_TV:
+		if (xgi_video_info.TV_type == TVMODE_HIVISION)
+			cr30 = (XGI_VB_OUTPUT_HIVISION | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_SVIDEO)
+			cr30 = (XGI_VB_OUTPUT_SVIDEO | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE)
+			cr30 = (XGI_VB_OUTPUT_COMPOSITE | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_SCART)
+			cr30 = (XGI_VB_OUTPUT_SCART | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+
+	        if (XGIfb_tvmode == 1 || xgi_video_info.TV_type == TVMODE_PAL)
+			cr31 |= 0x01;
+                else
+                        cr31 &= ~0x01;
+		break;
+	   default:	/* disable CRT2 */
+		cr30 = 0x00;
+		cr31 |= (XGI_DRIVER_MODE | XGI_VB_OUTPUT_DISABLE);
+	}
+
+	outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR30, cr30);
+	outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR31, cr31);
+        outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR33, (XGIfb_rate_idx & 0x0F));
+
+	if(xgi_video_info.accel) XGIfb_syncaccel();
+
+
+}
+
+static void XGIfb_post_setmode(void)
+{
+	u8 reg;
+	BOOLEAN doit = TRUE;
+#if 0	/* TW: Wrong: Is not in MMIO space, but in RAM */
+	/* Backup mode number to MMIO space */
+	if(xgi_video_info.mmio_vbase) {
+	  *(volatile u8 *)(((u8*)xgi_video_info.mmio_vbase) + 0x449) = (unsigned char)XGIfb_mode_no;
+	}
+#endif
+/*	outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+	outXGIIDXREG(XGICR,0x13,0x00);
+	setXGIIDXREG(XGISR,0x0E,0xF0,0x01);
+*test**/
+	if (xgi_video_info.video_bpp == 8) {
+		/* TW: We can't switch off CRT1 on LVDS/Chrontel in 8bpp Modes */
+		if ((xgi_video_info.hasVB == HASVB_LVDS) || (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL)) {
+			doit = FALSE;
+		}
+		/* TW: We can't switch off CRT1 on 301B-DH in 8bpp Modes if using LCD */
+		if  (xgi_video_info.disp_state & DISPTYPE_LCD)  {
+	        	doit = FALSE;
+	        }
+	}
+
+	/* TW: We can't switch off CRT1 if bridge is in slave mode */
+	if(xgi_video_info.hasVB != HASVB_NONE) {
+		inXGIIDXREG(XGIPART1, 0x00, reg);
+
+
+		if((reg & 0x50) == 0x10) {
+			doit = FALSE;
+		}
+
+	} else XGIfb_crt1off = 0;
+
+	inXGIIDXREG(XGICR, 0x17, reg);
+	if((XGIfb_crt1off) && (doit))
+		reg &= ~0x80;
+	else
+		reg |= 0x80;
+	outXGIIDXREG(XGICR, 0x17, reg);
+
+        andXGIIDXREG(XGISR, IND_XGI_RAMDAC_CONTROL, ~0x04);
+
+	if((xgi_video_info.disp_state & DISPTYPE_TV) && (xgi_video_info.hasVB == HASVB_301)) {
+
+	   inXGIIDXREG(XGIPART4, 0x01, reg);
+
+	   if(reg < 0xB0) {        	/* Set filter for XGI301 */
+
+		switch (xgi_video_info.video_width) {
+		   case 320:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 4 : 12;
+			break;
+		   case 640:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 5 : 13;
+			break;
+		   case 720:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 6 : 14;
+			break;
+		   case 800:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 7 : 15;
+			break;
+		   default:
+			filter = -1;
+			break;
+		}
+
+		orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+
+		if(xgi_video_info.TV_type == TVMODE_NTSC) {
+
+		        andXGIIDXREG(XGIPART2, 0x3a, 0x1f);
+
+			if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+			        andXGIIDXREG(XGIPART2, 0x30, 0xdf);
+
+			} else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+			        orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+				switch (xgi_video_info.video_width) {
+				case 640:
+				        outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+					outXGIIDXREG(XGIPART2, 0x36, 0x04);
+					outXGIIDXREG(XGIPART2, 0x37, 0x25);
+					outXGIIDXREG(XGIPART2, 0x38, 0x18);
+					break;
+				case 720:
+					outXGIIDXREG(XGIPART2, 0x35, 0xEE);
+					outXGIIDXREG(XGIPART2, 0x36, 0x0C);
+					outXGIIDXREG(XGIPART2, 0x37, 0x22);
+					outXGIIDXREG(XGIPART2, 0x38, 0x08);
+					break;
+				case 800:
+					outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+					outXGIIDXREG(XGIPART2, 0x36, 0x15);
+					outXGIIDXREG(XGIPART2, 0x37, 0x25);
+					outXGIIDXREG(XGIPART2, 0x38, 0xF6);
+					break;
+				}
+			}
+
+		} else if(xgi_video_info.TV_type == TVMODE_PAL) {
+
+			andXGIIDXREG(XGIPART2, 0x3A, 0x1F);
+
+			if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+			        andXGIIDXREG(XGIPART2, 0x30, 0xDF);
+
+			} else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+			        orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+				switch (xgi_video_info.video_width) {
+				case 640:
+					outXGIIDXREG(XGIPART2, 0x35, 0xF1);
+					outXGIIDXREG(XGIPART2, 0x36, 0xF7);
+					outXGIIDXREG(XGIPART2, 0x37, 0x1F);
+					outXGIIDXREG(XGIPART2, 0x38, 0x32);
+					break;
+				case 720:
+					outXGIIDXREG(XGIPART2, 0x35, 0xF3);
+					outXGIIDXREG(XGIPART2, 0x36, 0x00);
+					outXGIIDXREG(XGIPART2, 0x37, 0x1D);
+					outXGIIDXREG(XGIPART2, 0x38, 0x20);
+					break;
+				case 800:
+					outXGIIDXREG(XGIPART2, 0x35, 0xFC);
+					outXGIIDXREG(XGIPART2, 0x36, 0xFB);
+					outXGIIDXREG(XGIPART2, 0x37, 0x14);
+					outXGIIDXREG(XGIPART2, 0x38, 0x2A);
+					break;
+				}
+			}
+		}
+
+		if ((filter >= 0) && (filter <=7)) {
+			DPRINTK("FilterTable[%d]-%d: %02x %02x %02x %02x\n", filter_tb, filter,
+				XGI_TV_filter[filter_tb].filter[filter][0],
+				XGI_TV_filter[filter_tb].filter[filter][1],
+				XGI_TV_filter[filter_tb].filter[filter][2],
+				XGI_TV_filter[filter_tb].filter[filter][3]
+			);
+			outXGIIDXREG(XGIPART2, 0x35, (XGI_TV_filter[filter_tb].filter[filter][0]));
+			outXGIIDXREG(XGIPART2, 0x36, (XGI_TV_filter[filter_tb].filter[filter][1]));
+			outXGIIDXREG(XGIPART2, 0x37, (XGI_TV_filter[filter_tb].filter[filter][2]));
+			outXGIIDXREG(XGIPART2, 0x38, (XGI_TV_filter[filter_tb].filter[filter][3]));
+		}
+
+	     }
+
+	}
+
+}
+
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options)
+{
+	char *this_opt;
+
+
+
+	xgi_video_info.refresh_rate = 0;
+
+        printk(KERN_INFO "XGIfb: Options %s\n", options);
+
+	if (!options || !*options)
+		return 0;
+
+	while((this_opt = strsep(&options, ",")) != NULL) {
+
+		if (!*this_opt)	continue;
+
+		if (!strncmp(this_opt, "mode:", 5)) {
+			XGIfb_search_mode(this_opt + 5);
+		} else if (!strncmp(this_opt, "vesa:", 5)) {
+			XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+		} else if (!strncmp(this_opt, "mode:", 5)) {
+			XGIfb_search_mode(this_opt + 5);
+		} else if (!strncmp(this_opt, "vesa:", 5)) {
+			XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+		} else if (!strncmp(this_opt, "vrate:", 6)) {
+			xgi_video_info.refresh_rate = simple_strtoul(this_opt + 6, NULL, 0);
+		} else if (!strncmp(this_opt, "rate:", 5)) {
+			xgi_video_info.refresh_rate = simple_strtoul(this_opt + 5, NULL, 0);
+		} else if (!strncmp(this_opt, "off", 3)) {
+			XGIfb_off = 1;
+		} else if (!strncmp(this_opt, "crt1off", 7)) {
+			XGIfb_crt1off = 1;
+		} else if (!strncmp(this_opt, "filter:", 7)) {
+			filter = (int)simple_strtoul(this_opt + 7, NULL, 0);
+		} else if (!strncmp(this_opt, "forcecrt2type:", 14)) {
+			XGIfb_search_crt2type(this_opt + 14);
+		} else if (!strncmp(this_opt, "forcecrt1:", 10)) {
+			XGIfb_forcecrt1 = (int)simple_strtoul(this_opt + 10, NULL, 0);
+                } else if (!strncmp(this_opt, "tvmode:",7)) {
+		        XGIfb_search_tvstd(this_opt + 7);
+                } else if (!strncmp(this_opt, "tvstandard:",11)) {
+			XGIfb_search_tvstd(this_opt + 7);
+                } else if (!strncmp(this_opt, "mem:",4)) {
+		        XGIfb_mem = simple_strtoul(this_opt + 4, NULL, 0);
+                } else if (!strncmp(this_opt, "dstn", 4)) {
+			enable_dstn = 1;
+			/* TW: DSTN overrules forcecrt2type */
+			XGIfb_crt2type = DISPTYPE_LCD;
+		} else if (!strncmp(this_opt, "queuemode:", 10)) {
+			XGIfb_search_queuemode(this_opt + 10);
+		} else if (!strncmp(this_opt, "pdc:", 4)) {
+		        XGIfb_pdc = simple_strtoul(this_opt + 4, NULL, 0);
+		        if(XGIfb_pdc & ~0x3c) {
+			   printk(KERN_INFO "XGIfb: Illegal pdc parameter\n");
+			   XGIfb_pdc = 0;
+		        }
+		} else if (!strncmp(this_opt, "noaccel", 7)) {
+			XGIfb_accel = 0;
+		} else if (!strncmp(this_opt, "noypan", 6)) {
+		        XGIfb_ypan = 0;
+		} else if (!strncmp(this_opt, "userom:", 7)) {
+			XGIfb_userom = (int)simple_strtoul(this_opt + 7, NULL, 0);
+//		} else if (!strncmp(this_opt, "useoem:", 7)) {
+//			XGIfb_useoem = (int)simple_strtoul(this_opt + 7, NULL, 0);
+		} else {
+			XGIfb_search_mode(this_opt);
+//			printk(KERN_INFO "XGIfb: Invalid option %s\n", this_opt);
+		}
+
+		/* TW: Acceleration only with MMIO mode */
+		if((XGIfb_queuemode != -1) && (XGIfb_queuemode != MMIO_CMD)) {
+			XGIfb_ypan = 0;
+			XGIfb_accel = 0;
+		}
+		/* TW: Panning only with acceleration */
+		if(XGIfb_accel == 0) XGIfb_ypan = 0;
+
+	}
+	printk("\nxgifb: outa xgifb_setup 3450");
+	return 0;
+}
+#endif
+
+static unsigned char VBIOS_BUF[65535];
+
+unsigned char* attempt_map_rom(struct pci_dev *dev,void *copy_address)
+{
+    u32 rom_size      = 0;
+    u32 rom_address   = 0;
+    int j;
+
+    /*  Get the size of the expansion rom */
+    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
+    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
+    if ((rom_size & 0x01) == 0)
+    {
+		printk("No ROM\n");
+		return NULL;
+    }
+
+    rom_size &= 0xFFFFF800;
+    rom_size = (~rom_size)+1;
+
+    rom_address = pci_resource_start(dev, 0);
+    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
+    {
+		printk("No suitable rom address found\n"); return NULL;
+    }
+
+    printk("ROM Size is %dK, Address is %x\n", rom_size/1024, rom_address);
+
+    /*  Map ROM */
+    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
+
+    /* memcpy(copy_address, rom_address, rom_size); */
+    {
+		unsigned char *virt_addr = ioremap(rom_address, 0x8000000);
+
+		unsigned char *from = (unsigned char *)virt_addr;
+		unsigned char *to = (unsigned char *)copy_address;
+		for (j=0; j<65536 /*rom_size*/; j++) *to++ = *from++;
+	}
+
+	pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
+
+    printk("Copy is done\n");
+
+	return copy_address;
+}
+
+int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	u16 reg16;
+	u8  reg, reg1;
+        u8 CR48,CR38;
+	if (XGIfb_off)
+		return -ENXIO;
+
+	XGIfb_registered = 0;
+
+	memset(&XGIhw_ext, 0, sizeof(HW_DEVICE_EXTENSION));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+	  fb_info = framebuffer_alloc(sizeof(struct fb_info), &pdev->dev);
+	  if(!fb_info) return -ENOMEM;
+#else
+	  XGI_fb_info = kmalloc( sizeof(struct fb_info), GFP_KERNEL);
+	  if(!XGI_fb_info) return -ENOMEM;
+	  memset(XGI_fb_info, 0,  sizeof(struct fb_info));
+#endif
+
+  	xgi_video_info.chip_id = pdev->device;
+	  pci_read_config_byte(pdev, PCI_REVISION_ID,&xgi_video_info.revision_id);
+	  pci_read_config_word(pdev, PCI_COMMAND, &reg16);
+	  XGIhw_ext.jChipRevision = xgi_video_info.revision_id;
+	  XGIvga_enabled = reg16 & 0x01;
+
+	  xgi_video_info.pcibus = pdev->bus->number;
+	  xgi_video_info.pcislot = PCI_SLOT(pdev->devfn);
+	  xgi_video_info.pcifunc = PCI_FUNC(pdev->devfn);
+	  xgi_video_info.subsysvendor = pdev->subsystem_vendor;
+	  xgi_video_info.subsysdevice = pdev->subsystem_device;
+
+	  xgi_video_info.video_base = pci_resource_start(pdev, 0);
+	  xgi_video_info.mmio_base = pci_resource_start(pdev, 1);
+	  XGIfb_mmio_size =  pci_resource_len(pdev, 1);
+	  xgi_video_info.vga_base = pci_resource_start(pdev, 2) + 0x30;
+	  XGIhw_ext.pjIOAddress = (PUCHAR)xgi_video_info.vga_base;
+	  //XGI_Pr.RelIO  = ioremap(pci_resource_start(pdev, 2), 128) + 0x30;
+	  printk("XGIfb: Relocate IO address: %lx [%08lx] \n", (unsigned long)pci_resource_start(pdev, 2), XGI_Pr.RelIO);
+
+	  if (pci_enable_device(pdev))
+	          return -EIO;
+
+    XGIRegInit(&XGI_Pr, (ULONG)XGIhw_ext.pjIOAddress);
+
+    outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+    inXGIIDXREG(XGISR, IND_XGI_PASSWORD, reg1);
+
+    if(reg1 != 0xa1) /*I/O error */
+    {
+         printk("\nXGIfb: I/O error!!!");
+         return  -EIO;
+    }
+
+	switch (xgi_video_info.chip_id) {
+	   case PCI_DEVICE_ID_XG_20:
+		orXGIIDXREG(XGICR, Index_CR_GPIO_Reg3, GPIOG_EN);
+		inXGIIDXREG(XGICR, Index_CR_GPIO_Reg1, CR48);
+		if (CR48&GPIOG_READ)
+			xgi_video_info.chip = XG21;
+		else
+		   	xgi_video_info.chip = XG20;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_40:
+		xgi_video_info.chip = XG40;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_41:
+		xgi_video_info.chip = XG41;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_42:
+		xgi_video_info.chip = XG42;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_27:
+		xgi_video_info.chip = XG27;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+           default:
+	        return -ENODEV;
+	}
+
+	printk("XGIfb:chipid = %x\n",xgi_video_info.chip);
+	 XGIhw_ext.jChipType = xgi_video_info.chip;
+
+		switch (xgi_video_info.chip) {
+		   case XG40:
+		   case XG41:
+		   case XG42:
+		   case XG45:
+		   case XG20:
+		   case XG21:
+                   case XG27:
+                   XGIhw_ext.bIntegratedMMEnabled = TRUE;
+			break;
+
+		   default:
+			break;
+		}
+
+
+	  XGIhw_ext.pDevice = NULL;
+	  if ((xgi_video_info.chip == XG21) || (XGIfb_userom))
+	  {
+	      XGIhw_ext.pjVirtualRomBase = attempt_map_rom(pdev, VBIOS_BUF);
+
+	      if(XGIhw_ext.pjVirtualRomBase)
+			printk(KERN_INFO "XGIfb: Video ROM found and mapped to %p\n",XGIhw_ext.pjVirtualRomBase);
+		else
+			printk(KERN_INFO "XGIfb: Video ROM not found\n");
+    } else {
+	    	XGIhw_ext.pjVirtualRomBase = NULL;
+		printk(KERN_INFO "XGIfb: Video ROM usage disabled\n");
+    }
+	  XGIhw_ext.pjCustomizedROMImage = NULL;
+	  XGIhw_ext.bSkipDramSizing = 0;
+	  XGIhw_ext.pQueryVGAConfigSpace = &XGIfb_query_VGA_config_space;
+//	XGIhw_ext.pQueryNorthBridgeSpace = &XGIfb_query_north_bridge_space;
+	  strcpy(XGIhw_ext.szVBIOSVer, "0.84");
+
+
+    XGIhw_ext.pSR = vmalloc(sizeof(XGI_DSReg) * SR_BUFFER_SIZE);
+	  if (XGIhw_ext.pSR == NULL)
+	  {
+		    printk(KERN_ERR "XGIfb: Fatal error: Allocating SRReg space failed.\n");
+		    return -ENODEV;
+	  }
+	  XGIhw_ext.pSR[0].jIdx = XGIhw_ext.pSR[0].jVal = 0xFF;
+
+	  XGIhw_ext.pCR = vmalloc(sizeof(XGI_DSReg) * CR_BUFFER_SIZE);
+	  if (XGIhw_ext.pCR == NULL)
+	  {
+	      vfree(XGIhw_ext.pSR);
+		    printk(KERN_ERR "XGIfb: Fatal error: Allocating CRReg space failed.\n");
+		    return -ENODEV;
+	  }
+	  XGIhw_ext.pCR[0].jIdx = XGIhw_ext.pCR[0].jVal = 0xFF;
+
+
+
+
+	if (!XGIvga_enabled)
+	{
+			/* Mapping Max FB Size for 315 Init */
+	    XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+	    if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	    {
+#ifdef LINUXBIOS
+		printk("XGIfb: XGIInit() ...");
+		/* XGIInitNewt for LINUXBIOS only */
+		if(XGIInitNew(&XGIhw_ext))
+		{
+			printk("OK\n");
+		}
+		else
+		{
+		    printk("Fail\n");
+		}
+#endif
+
+		outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+
+	    }
+	}
+#ifdef LINUXBIOS
+	else
+	{
+	    XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+	    if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	    {
+
+		outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+		// yilin Because no VBIOS DRAM Sizing, Dram size will error.
+		// Set SR13 ,14 temporarily for UDtech
+		outXGIIDXREG(XGISR, 0x13, 0x45);
+		outXGIIDXREG(XGISR, 0x14, 0x51);
+
+
+	    }
+	}
+#endif
+	if (XGIfb_get_dram_size())
+	{
+	    vfree(XGIhw_ext.pSR);
+	    vfree(XGIhw_ext.pCR);
+	    printk(KERN_INFO "XGIfb: Fatal error: Unable to determine RAM size.\n");
+	    return -ENODEV;
+	}
+
+
+
+	  if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	  {
+	       /* Enable PCI_LINEAR_ADDRESSING and MMIO_ENABLE  */
+        orXGIIDXREG(XGISR, IND_XGI_PCI_ADDRESS_SET, (XGI_PCI_ADDR_ENABLE | XGI_MEM_MAP_IO_ENABLE));
+         /* Enable 2D accelerator engine */
+        orXGIIDXREG(XGISR, IND_XGI_MODULE_ENABLE, XGI_ENABLE_2D);
+    }
+
+	  XGIhw_ext.ulVideoMemorySize = xgi_video_info.video_size;
+
+	  if (!request_mem_region(xgi_video_info.video_base, xgi_video_info.video_size, "XGIfb FB"))
+	  {         printk("unable request memory size %x",xgi_video_info.video_size);
+		    printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve frame buffer memory\n");
+		    printk(KERN_ERR "XGIfb: Is there another framebuffer driver active?\n");
+		    vfree(XGIhw_ext.pSR);
+		    vfree(XGIhw_ext.pCR);
+		    return -ENODEV;
+	  }
+
+	  if (!request_mem_region(xgi_video_info.mmio_base, XGIfb_mmio_size, "XGIfb MMIO"))
+	  {
+		    printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve MMIO region\n");
+		    release_mem_region(xgi_video_info.video_base, xgi_video_info.video_size);
+		    vfree(XGIhw_ext.pSR);
+		    vfree(XGIhw_ext.pCR);
+		    return -ENODEV;
+	  }
+
+	  xgi_video_info.video_vbase = XGIhw_ext.pjVideoMemoryAddress =
+		ioremap(xgi_video_info.video_base, xgi_video_info.video_size);
+	  xgi_video_info.mmio_vbase = ioremap(xgi_video_info.mmio_base, XGIfb_mmio_size);
+
+	  printk(KERN_INFO "XGIfb: Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
+	      xgi_video_info.video_base, xgi_video_info.video_vbase,xgi_video_info.video_size / 1024);
+
+	  printk(KERN_INFO "XGIfb: MMIO at 0x%lx, mapped to 0x%p, size %ldk\n",
+	      xgi_video_info.mmio_base, xgi_video_info.mmio_vbase,XGIfb_mmio_size / 1024);
+          printk("XGIfb: XGIInitNew() ...");
+	  if(XGIInitNew(&XGIhw_ext))
+	  {
+		  printk("OK\n");
+	  }
+	  else
+	  {
+		printk("Fail\n");
+	  }
+
+	  if(XGIfb_heap_init())
+	  {
+		    printk(KERN_WARNING "XGIfb: Failed to initialize offscreen memory heap\n");
+	  }
+
+
+	  xgi_video_info.mtrr = (unsigned int) 0;
+
+	  if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	  {
+		  xgi_video_info.hasVB = HASVB_NONE;
+        if((xgi_video_info.chip == XG20)||(xgi_video_info.chip == XG27))
+	      xgi_video_info.hasVB = HASVB_NONE;
+        else if(xgi_video_info.chip == XG21) {
+            inXGIIDXREG(XGICR,0x38,CR38);
+            if ((CR38&0xE0) == 0xC0) {
+		    xgi_video_info.disp_state = DISPTYPE_LCD;
+        	    if (!XGIfb_GetXG21LVDSData()) {
+			    int m;
+			    for (m=0; m < sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct); m++) {
+				    if ((XGI21_LCDCapList[m].LVDSHDE == XGIbios_mode[xgifb_mode_idx].xres) &&
+					(XGI21_LCDCapList[m].LVDSVDE == XGIbios_mode[xgifb_mode_idx].yres)) {
+						XGINew_SetReg1( XGI_Pr.P3d4 , 0x36, m) ;
+				    }
+			    }
+		    }
+            }
+            else if ((CR38&0xE0) == 0x60)
+		xgi_video_info.hasVB = HASVB_CHRONTEL ;
+            else
+		xgi_video_info.hasVB = HASVB_NONE;
+	}
+        else
+		    XGIfb_get_VB_type();
+
+		    XGIhw_ext.ujVBChipID = VB_CHIP_UNKNOWN;
+
+		    XGIhw_ext.ulExternalChip = 0;
+
+		switch (xgi_video_info.hasVB) {
+		case HASVB_301:
+		        inXGIIDXREG(XGIPART4, 0x01, reg);
+			if (reg >= 0xE0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xD0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+				printk(KERN_INFO "XGIfb: XGI301LV bridge detected (revision 0x%02x)\n",reg);
+	  		}
+			/* else if (reg >= 0xB0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301B;
+				inXGIIDXREG(XGIPART4,0x23,reg1);
+			       printk("XGIfb: XGI301B bridge detected\n");
+			}*/
+			else {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301;
+				printk("XGIfb: XGI301 bridge detected\n");
+			}
+			break;
+		case HASVB_302:
+		        inXGIIDXREG(XGIPART4, 0x01, reg);
+			if (reg >= 0xE0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xD0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xB0) {
+				inXGIIDXREG(XGIPART4,0x23,reg1);
+
+			        XGIhw_ext.ujVBChipID = VB_CHIP_302B;
+
+			} else {
+			        XGIhw_ext.ujVBChipID = VB_CHIP_302;
+				printk(KERN_INFO "XGIfb: XGI302 bridge detected\n");
+			}
+			break;
+		case HASVB_LVDS:
+			XGIhw_ext.ulExternalChip = 0x1;
+			printk(KERN_INFO "XGIfb: LVDS transmitter detected\n");
+			break;
+		case HASVB_TRUMPION:
+			XGIhw_ext.ulExternalChip = 0x2;
+			printk(KERN_INFO "XGIfb: Trumpion Zurac LVDS scaler detected\n");
+			break;
+		case HASVB_CHRONTEL:
+			XGIhw_ext.ulExternalChip = 0x4;
+			printk(KERN_INFO "XGIfb: Chrontel TV encoder detected\n");
+			break;
+		case HASVB_LVDS_CHRONTEL:
+			XGIhw_ext.ulExternalChip = 0x5;
+			printk(KERN_INFO "XGIfb: LVDS transmitter and Chrontel TV encoder detected\n");
+			break;
+ 		default:
+			printk(KERN_INFO "XGIfb: No or unknown bridge type detected\n");
+			break;
+		}
+
+		if (xgi_video_info.hasVB != HASVB_NONE) {
+		    XGIfb_detect_VB();
+    }
+
+		if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+			if (XGIfb_crt1off)
+				xgi_video_info.disp_state |= DISPMODE_SINGLE;
+			else
+				xgi_video_info.disp_state |= (DISPMODE_MIRROR | DISPTYPE_CRT1);
+		} else {
+			xgi_video_info.disp_state = DISPMODE_SINGLE | DISPTYPE_CRT1;
+		}
+
+		if (xgi_video_info.disp_state & DISPTYPE_LCD) {
+		    if (!enable_dstn) {
+		        inXGIIDXREG(XGICR, IND_XGI_LCD_PANEL, reg);
+			    reg &= 0x0f;
+			    XGIhw_ext.ulCRT2LCDType = XGI310paneltype[reg];
+
+		    } else {
+		        // TW: FSTN/DSTN
+			XGIhw_ext.ulCRT2LCDType = LCD_320x480;
+		    }
+		}
+
+		XGIfb_detectedpdc = 0;
+
+	        XGIfb_detectedlcda = 0xff;
+#ifndef LINUXBIOS
+
+                /* TW: Try to find about LCDA */
+
+        if((XGIhw_ext.ujVBChipID == VB_CHIP_302B) ||
+	       (XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+	       (XGIhw_ext.ujVBChipID == VB_CHIP_302LV))
+	    {
+	       int tmp;
+	       inXGIIDXREG(XGICR,0x34,tmp);
+	       if(tmp <= 0x13)
+	       {
+	          // Currently on LCDA? (Some BIOSes leave CR38)
+	          inXGIIDXREG(XGICR,0x38,tmp);
+		      if((tmp & 0x03) == 0x03)
+		      {
+//		          XGI_Pr.XGI_UseLCDA = TRUE;
+		      }else
+		      {
+		     //  Currently on LCDA? (Some newer BIOSes set D0 in CR35)
+		         inXGIIDXREG(XGICR,0x35,tmp);
+		         if(tmp & 0x01)
+		         {
+//		              XGI_Pr.XGI_UseLCDA = TRUE;
+		           }else
+		           {
+		               inXGIIDXREG(XGICR,0x30,tmp);
+		               if(tmp & 0x20)
+		               {
+		                   inXGIIDXREG(XGIPART1,0x13,tmp);
+			               if(tmp & 0x04)
+			               {
+//			                XGI_Pr.XGI_UseLCDA = TRUE;
+			               }
+		               }
+		           }
+		        }
+	         }
+
+        }
+
+
+#endif
+
+		if (xgifb_mode_idx >= 0)
+			xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+
+		if (xgifb_mode_idx < 0) {
+			switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+			   case DISPTYPE_LCD:
+				xgifb_mode_idx = DEFAULT_LCDMODE;
+				if (xgi_video_info.chip == XG21)
+				{
+				    xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+				}
+				break;
+			   case DISPTYPE_TV:
+				xgifb_mode_idx = DEFAULT_TVMODE;
+				break;
+			   default:
+				xgifb_mode_idx = DEFAULT_MODE;
+				break;
+			}
+		}
+
+		XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+
+
+                if( xgi_video_info.refresh_rate == 0)
+		    xgi_video_info.refresh_rate = 60; /*yilin set default refresh rate */
+	        if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0)
+                {
+		    XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+		    xgi_video_info.refresh_rate = 60;
+	        }
+
+		xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+		xgi_video_info.video_vwidth = xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+		xgi_video_info.video_vheight = xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+		xgi_video_info.org_x = xgi_video_info.org_y = 0;
+		xgi_video_info.video_linelength = xgi_video_info.video_width * (xgi_video_info.video_bpp >> 3);
+		switch(xgi_video_info.video_bpp) {
+        	case 8:
+            		xgi_video_info.DstColor = 0x0000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00000000;
+			xgi_video_info.video_cmap_len = 256;
+            		break;
+        	case 16:
+            		xgi_video_info.DstColor = 0x8000;
+            		xgi_video_info.XGI310_AccelDepth = 0x00010000;
+			xgi_video_info.video_cmap_len = 16;
+            		break;
+        	case 32:
+            		xgi_video_info.DstColor = 0xC000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00020000;
+			xgi_video_info.video_cmap_len = 16;
+            		break;
+		default:
+			xgi_video_info.video_cmap_len = 16;
+		        printk(KERN_INFO "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+			break;
+    		}
+
+
+
+		printk(KERN_INFO "XGIfb: Default mode is %dx%dx%d (%dHz)\n",
+	       		xgi_video_info.video_width, xgi_video_info.video_height, xgi_video_info.video_bpp,
+			xgi_video_info.refresh_rate);
+
+		default_var.xres = default_var.xres_virtual = xgi_video_info.video_width;
+		default_var.yres = default_var.yres_virtual = xgi_video_info.video_height;
+		default_var.bits_per_pixel = xgi_video_info.video_bpp;
+
+		XGIfb_bpp_to_var(&default_var);
+
+		default_var.pixclock = (u32) (1000000000 /
+				XGIfb_mode_rate_to_dclock(&XGI_Pr, &XGIhw_ext,
+						XGIfb_mode_no, XGIfb_rate_idx));
+
+		if(XGIfb_mode_rate_to_ddata(&XGI_Pr, &XGIhw_ext,
+			 XGIfb_mode_no, XGIfb_rate_idx,
+			 &default_var.left_margin, &default_var.right_margin,
+			 &default_var.upper_margin, &default_var.lower_margin,
+			 &default_var.hsync_len, &default_var.vsync_len,
+			 &default_var.sync, &default_var.vmode)) {
+
+		   if((default_var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		      default_var.yres <<= 1;
+		      default_var.yres_virtual <<= 1;
+		   } else if((default_var.vmode	& FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+		      default_var.pixclock >>= 1;
+		      default_var.yres >>= 1;
+		      default_var.yres_virtual >>= 1;
+		   }
+
+	        }
+
+
+#if 0
+#ifdef XGIFB_PAN
+		if(XGIfb_ypan) {
+	    		default_var.yres_virtual =
+				xgi_video_info.heapstart / (default_var.xres * (default_var.bits_per_pixel >> 3));
+	    		if(default_var.yres_virtual <= default_var.yres) {
+	        		default_var.yres_virtual = default_var.yres;
+	    		}
+		}
+#endif
+#endif
+
+
+		xgi_video_info.accel = 0;
+		if(XGIfb_accel) {
+		   xgi_video_info.accel = -1;
+		   default_var.accel_flags |= FB_ACCELF_TEXT;
+		   XGIfb_initaccel();
+		}
+
+		fb_info->flags = FBINFO_FLAG_DEFAULT;
+		fb_info->var = default_var;
+		fb_info->fix = XGIfb_fix;
+		fb_info->par = &xgi_video_info;
+		fb_info->screen_base = xgi_video_info.video_vbase;
+		fb_info->fbops = &XGIfb_ops;
+		XGIfb_get_fix(&fb_info->fix, -1, fb_info);
+		fb_info->pseudo_palette = pseudo_palette;
+
+		fb_alloc_cmap(&fb_info->cmap, 256 , 0);
+
+
+#ifdef CONFIG_MTRR
+		xgi_video_info.mtrr = mtrr_add((unsigned int) xgi_video_info.video_base,
+				(unsigned int) xgi_video_info.video_size,
+				MTRR_TYPE_WRCOMB, 1);
+		if(xgi_video_info.mtrr) {
+			printk(KERN_INFO "XGIfb: Added MTRRs\n");
+		}
+#endif
+
+		if(register_framebuffer(fb_info) < 0)
+    {
+			return -EINVAL;
+    }
+
+		XGIfb_registered = 1;
+
+		printk(KERN_INFO "XGIfb: Installed XGIFB_GET_INFO ioctl (%x)\n", XGIFB_GET_INFO);
+
+/*		printk(KERN_INFO "XGIfb: 2D acceleration is %s, scrolling mode %s\n",
+		     XGIfb_accel ? "enabled" : "disabled",
+		     XGIfb_ypan  ? "ypan" : "redraw");
+*/
+		printk(KERN_INFO "fb%d: %s frame buffer device, Version %d.%d.%02d\n",
+	       		fb_info->node, myid, VER_MAJOR, VER_MINOR, VER_LEVEL);
+
+
+	}
+
+	dumpVGAReg();
+
+	return 0;
+}
+
+
+/*****************************************************/
+/*                PCI DEVICE HANDLING                */
+/*****************************************************/
+
+static void __devexit xgifb_remove(struct pci_dev *pdev)
+{
+	/* Unregister the framebuffer */
+//	if(xgi_video_info.registered) {
+		unregister_framebuffer(fb_info);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+		framebuffer_release(fb_info);
+#else
+		kfree(fb_info);
+#endif
+//	}
+
+	pci_set_drvdata(pdev, NULL);
+
+};
+
+static struct pci_driver xgifb_driver = {
+	.name		= "xgifb",
+	.id_table 	= xgifb_pci_table,
+	.probe 		= xgifb_probe,
+	.remove 	= __devexit_p(xgifb_remove)
+};
+
+XGIINITSTATIC int __init xgifb_init(void)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("xgifb", &option))
+		return -ENODEV;
+	XGIfb_setup(option);
+#endif
+#endif
+	return(pci_register_driver(&xgifb_driver));
+}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+module_init(xgifb_init);
+#endif
+#endif
+
+/*****************************************************/
+/*                      MODULE                       */
+/*****************************************************/
+
+#ifdef MODULE
+
+static char         *mode = NULL;
+static int          vesa = 0;
+static unsigned int rate = 0;
+static unsigned int crt1off = 1;
+static unsigned int mem = 0;
+static char         *forcecrt2type = NULL;
+static int          forcecrt1 = -1;
+static int          pdc = -1;
+static int          pdc1 = -1;
+static int          noaccel = -1;
+static int          noypan  = -1;
+static int	    nomax = -1;
+static int          userom = -1;
+static int          useoem = -1;
+static char         *tvstandard = NULL;
+static int	    nocrt2rate = 0;
+static int          scalelcd = -1;
+static char	    *specialtiming = NULL;
+static int	    lvdshl = -1;
+static int	    tvxposoffset = 0, tvyposoffset = 0;
+#if !defined(__i386__) && !defined(__x86_64__)
+static int	    resetcard = 0;
+static int	    videoram = 0;
+#endif
+
+MODULE_DESCRIPTION("Z7 Z9 Z9S Z11 framebuffer device driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("XGITECH , Others");
+
+
+
+module_param(mem, int, 0);
+module_param(noaccel, int, 0);
+module_param(noypan, int, 0);
+module_param(nomax, int, 0);
+module_param(userom, int, 0);
+module_param(useoem, int, 0);
+module_param(mode, charp, 0);
+module_param(vesa, int, 0);
+module_param(rate, int, 0);
+module_param(forcecrt1, int, 0);
+module_param(forcecrt2type, charp, 0);
+module_param(scalelcd, int, 0);
+module_param(pdc, int, 0);
+module_param(pdc1, int, 0);
+module_param(specialtiming, charp, 0);
+module_param(lvdshl, int, 0);
+module_param(tvstandard, charp, 0);
+module_param(tvxposoffset, int, 0);
+module_param(tvyposoffset, int, 0);
+module_param(filter, int, 0);
+module_param(nocrt2rate, int, 0);
+#if !defined(__i386__) && !defined(__x86_64__)
+module_param(resetcard, int, 0);
+module_param(videoram, int, 0);
+#endif
+
+
+MODULE_PARM_DESC(mem,
+	"\nDetermines the beginning of the video memory heap in KB. This heap is used\n"
+	  "for video RAM management for eg. DRM/DRI. On 300 series, the default depends\n"
+	  "on the amount of video RAM available. If 8MB of video RAM or less is available,\n"
+	  "the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,\n"
+	  "otherwise at 12288KB. On 315 and Xabre series, the heap size is 32KB by default.\n"
+	  "The value is to be specified without 'KB' and must match the MaxXFBMem setting\n"
+	  "for XFree86 4.x/X.org 6.7 and later.\n");
+
+MODULE_PARM_DESC(noaccel,
+        "\nIf set to anything other than 0, 2D acceleration will be disabled.\n"
+	  "(default: 0)\n");
+
+MODULE_PARM_DESC(noypan,
+        "\nIf set to anything other than 0, y-panning will be disabled and scrolling\n"
+ 	  "will be performed by redrawing the screen. (default: 0)\n");
+
+MODULE_PARM_DESC(nomax,
+        "\nIf y-panning is enabled, xgifb will by default use the entire available video\n"
+	  "memory for the virtual screen in order to optimize scrolling performance. If\n"
+	  "this is set to anything other than 0, xgifb will not do this and thereby \n"
+	  "enable the user to positively specify a virtual Y size of the screen using\n"
+	  "fbset. (default: 0)\n");
+
+
+
+MODULE_PARM_DESC(mode,
+       "\nSelects the desired default display mode in the format XxYxDepth,\n"
+         "eg. 1024x768x16. Other formats supported include XxY-Depth and\n"
+	 "XxY-Depth@Rate. If the parameter is only one (decimal or hexadecimal)\n"
+	 "number, it will be interpreted as a VESA mode number. (default: 800x600x8)\n");
+
+MODULE_PARM_DESC(vesa,
+       "\nSelects the desired default display mode by VESA defined mode number, eg.\n"
+         "0x117 (default: 0x0103)\n");
+
+
+MODULE_PARM_DESC(rate,
+	"\nSelects the desired vertical refresh rate for CRT1 (external VGA) in Hz.\n"
+	  "If the mode is specified in the format XxY-Depth@Rate, this parameter\n"
+	  "will be ignored (default: 60)\n");
+
+MODULE_PARM_DESC(forcecrt1,
+	"\nNormally, the driver autodetects whether or not CRT1 (external VGA) is \n"
+	  "connected. With this option, the detection can be overridden (1=CRT1 ON,\n"
+	  "0=CRT1 OFF) (default: [autodetected])\n");
+
+MODULE_PARM_DESC(forcecrt2type,
+	"\nIf this option is omitted, the driver autodetects CRT2 output devices, such as\n"
+	  "LCD, TV or secondary VGA. With this option, this autodetection can be\n"
+	  "overridden. Possible parameters are LCD, TV, VGA or NONE. NONE disables CRT2.\n"
+	  "On systems with a SiS video bridge, parameters SVIDEO, COMPOSITE or SCART can\n"
+	  "be used instead of TV to override the TV detection. Furthermore, on systems\n"
+	  "with a SiS video bridge, SVIDEO+COMPOSITE, HIVISION, YPBPR480I, YPBPR480P,\n"
+	  "YPBPR720P and YPBPR1080I are understood. However, whether or not these work\n"
+	  "depends on the very hardware in use. (default: [autodetected])\n");
+
+MODULE_PARM_DESC(scalelcd,
+	"\nSetting this to 1 will force the driver to scale the LCD image to the panel's\n"
+	  "native resolution. Setting it to 0 will disable scaling; LVDS panels will\n"
+	  "show black bars around the image, TMDS panels will probably do the scaling\n"
+	  "themselves. Default: 1 on LVDS panels, 0 on TMDS panels\n");
+
+MODULE_PARM_DESC(pdc,
+        "\nThis is for manually selecting the LCD panel delay compensation. The driver\n"
+	  "should detect this correctly in most cases; however, sometimes this is not\n"
+	  "possible. If you see 'small waves' on the LCD, try setting this to 4, 32 or 24\n"
+	  "on a 300 series chipset; 6 on a 315 series chipset. If the problem persists,\n"
+	  "try other values (on 300 series: between 4 and 60 in steps of 4; on 315 series:\n"
+	  "any value from 0 to 31). (default: autodetected, if LCD is active during start)\n");
+
+MODULE_PARM_DESC(pdc1,
+        "\nThis is same as pdc, but for LCD-via CRT1. Hence, this is for the 315/330\n"
+	  "series only. (default: autodetected if LCD is in LCD-via-CRT1 mode during\n"
+	  "startup) - Note: currently, this has no effect because LCD-via-CRT1 is not\n"
+	  "implemented yet.\n");
+
+MODULE_PARM_DESC(specialtiming,
+	"\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(lvdshl,
+	"\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(tvstandard,
+	"\nThis allows overriding the BIOS default for the TV standard. Valid choices are\n"
+	  "pal, ntsc, palm and paln. (default: [auto; pal or ntsc only])\n");
+
+MODULE_PARM_DESC(tvxposoffset,
+	"\nRelocate TV output horizontally. Possible parameters: -32 through 32.\n"
+	  "Default: 0\n");
+
+MODULE_PARM_DESC(tvyposoffset,
+	"\nRelocate TV output vertically. Possible parameters: -32 through 32.\n"
+	  "Default: 0\n");
+
+MODULE_PARM_DESC(filter,
+	"\nSelects TV flicker filter type (only for systems with a SiS301 video bridge).\n"
+	  "(Possible values 0-7, default: [no filter])\n");
+
+MODULE_PARM_DESC(nocrt2rate,
+	"\nSetting this to 1 will force the driver to use the default refresh rate for\n"
+	  "CRT2 if CRT2 type is VGA. (default: 0, use same rate as CRT1)\n");
+
+
+
+
+int __init xgifb_init_module(void)
+{
+        printk("\nXGIfb_init_module");
+	if(mode)
+		XGIfb_search_mode(mode);
+	else if (vesa != -1)
+		XGIfb_search_vesamode(vesa);
+
+        return(xgifb_init());
+}
+
+static void __exit xgifb_remove_module(void)
+{
+	pci_unregister_driver(&xgifb_driver);
+	printk(KERN_DEBUG "xgifb: Module unloaded\n");
+}
+
+module_init(xgifb_init_module);
+module_exit(xgifb_remove_module);
+
+#endif 	   /*  /MODULE  */
+
+EXPORT_SYMBOL(XGI_malloc);
+EXPORT_SYMBOL(XGI_free);
+
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
new file mode 100644
index 00000000000..41bf163d4e6
--- /dev/null
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -0,0 +1,215 @@
+#ifndef _LINUX_XGIFB
+#define _LINUX_XGIFB
+#include <linux/spinlock.h>
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+#define DISPTYPE_CRT1       0x00000008L
+#define DISPTYPE_CRT2       0x00000004L
+#define DISPTYPE_LCD        0x00000002L
+#define DISPTYPE_TV         0x00000001L
+#define DISPTYPE_DISP1      DISPTYPE_CRT1
+#define DISPTYPE_DISP2      (DISPTYPE_CRT2 | DISPTYPE_LCD | DISPTYPE_TV)
+#define DISPMODE_SINGLE	    0x00000020L
+#define DISPMODE_MIRROR	    0x00000010L
+#define DISPMODE_DUALVIEW   0x00000040L
+
+#define HASVB_NONE      	0x00
+#define HASVB_301       	0x01
+#define HASVB_LVDS      	0x02
+#define HASVB_TRUMPION  	0x04
+#define HASVB_LVDS_CHRONTEL	0x10
+#define HASVB_302       	0x20
+#define HASVB_303       	0x40
+#define HASVB_CHRONTEL  	0x80
+
+#ifndef XGIFB_ID
+#define XGIFB_ID          0x53495346    /* Identify myself with 'XGIF' */
+#endif
+
+typedef enum _XGI_CHIP_TYPE {
+    XGI_VGALegacy = 0,
+    XGI_300,
+    XGI_630,
+    XGI_730,
+    XGI_540,
+    XGI_315H,
+    XGI_315,
+    XGI_315PRO,
+    XGI_550,
+    XGI_640,
+    XGI_740,
+    XGI_650,
+    XGI_650M,
+    XGI_330 = 16,
+    XGI_660,
+    XGI_661,
+    XGI_760,
+    XG40 = 32,
+    XG41,
+    XG42,
+    XG45,
+    XG20 = 48,
+    XG21,
+    XG27,
+    MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+
+typedef enum _TVTYPE {
+	TVMODE_NTSC = 0,
+	TVMODE_PAL,
+	TVMODE_HIVISION,
+	TVTYPE_PALM,	// vicki@030226
+    	TVTYPE_PALN,	// vicki@030226
+    	TVTYPE_NTSCJ,	// vicki@030226
+	TVMODE_TOTAL
+} XGI_TV_TYPE;
+
+
+typedef struct _XGIFB_INFO XGIfb_info;
+struct _XGIFB_INFO {
+
+unsigned long XGIfb_id;
+ 	int    chip_id;			/* PCI ID of detected chip */
+	int    memory;			/* video memory in KB which XGIfb manages */
+	int    heapstart;               /* heap start (= XGIfb "mem" argument) in KB */
+	unsigned char fbvidmode;	/* current XGIfb mode */
+
+	unsigned char XGIfb_version;
+	unsigned char XGIfb_revision;
+	unsigned char XGIfb_patchlevel;
+
+	unsigned char XGIfb_caps;	/* XGIfb capabilities */
+
+	int    XGIfb_tqlen;		/* turbo queue length (in KB) */
+
+	unsigned int XGIfb_pcibus;      /* The card's PCI ID */
+	unsigned int XGIfb_pcislot;
+	unsigned int XGIfb_pcifunc;
+
+	unsigned char XGIfb_lcdpdc;	/* PanelDelayCompensation */
+
+	unsigned char XGIfb_lcda;	/* Detected status of LCDA for low res/text modes */
+
+	char reserved[235]; 		/* for future use */
+};
+
+
+
+
+typedef enum _TVPLUGTYPE {	// vicki@030226
+//	TVPLUG_Legacy = 0,
+//	TVPLUG_COMPOSITE,
+//	TVPLUG_SVIDEO,
+//	TVPLUG_SCART,
+//	TVPLUG_TOTAL
+    	TVPLUG_UNKNOWN = 0,
+    	TVPLUG_COMPOSITE = 1,
+    	TVPLUG_SVIDEO = 2,
+    	TVPLUG_COMPOSITE_AND_SVIDEO = 3,
+    	TVPLUG_SCART = 4,
+    	TVPLUG_YPBPR_525i = 5,
+    	TVPLUG_YPBPR_525P = 6,
+    	TVPLUG_YPBPR_750P = 7,
+    	TVPLUG_YPBPR_1080i = 8,
+	TVPLUG_TOTAL
+} XGI_TV_PLUG;
+
+
+struct mode_info {
+	int    bpp;
+	int    xres;
+	int    yres;
+	int    v_xres;
+	int    v_yres;
+	int    org_x;
+	int    org_y;
+	unsigned int  vrate;
+};
+
+struct ap_data {
+	struct mode_info minfo;
+	unsigned long iobase;
+	unsigned int  mem_size;
+	unsigned long disp_state;
+	XGI_CHIP_TYPE chip;
+	unsigned char hasVB;
+	XGI_TV_TYPE TV_type;
+	XGI_TV_PLUG TV_plug;
+	unsigned long version;
+	char reserved[256];
+};
+
+
+
+/*     If changing this, vgatypes.h must also be changed (for X driver)    */
+
+
+/*
+ * NOTE! The ioctl types used to be "size_t" by mistake, but were
+ * really meant to be __u32. Changed to "__u32" even though that
+ * changes the value on 64-bit architectures, because the value
+ * (with a 4-byte size) is also hardwired in vgatypes.h for user
+ * space exports. So "__u32" is actually more compatible, duh!
+ */
+#define XGIFB_GET_INFO	  	_IOR('n',0xF8,__u32)
+#define XGIFB_GET_VBRSTATUS  	_IOR('n',0xF9,__u32)
+
+
+
+struct video_info{
+        int           chip_id;
+        unsigned int  video_size;
+        unsigned long video_base;
+        char  *       video_vbase;
+        unsigned long mmio_base;
+        char  *       mmio_vbase;
+        unsigned long vga_base;
+        unsigned long mtrr;
+        unsigned long heapstart;
+
+        int    video_bpp;
+        int    video_cmap_len;
+        int    video_width;
+        int    video_height;
+        int    video_vwidth;
+        int    video_vheight;
+        int    org_x;
+        int    org_y;
+        int    video_linelength;
+        unsigned int refresh_rate;
+
+        unsigned long disp_state;
+        unsigned char hasVB;
+        unsigned char TV_type;
+        unsigned char TV_plug;
+
+        XGI_CHIP_TYPE chip;
+        unsigned char revision_id;
+
+        unsigned short DstColor;
+        unsigned long  XGI310_AccelDepth;
+        unsigned long  CommandReg;
+
+        spinlock_t     lockaccel;
+
+        unsigned int   pcibus;
+        unsigned int   pcislot;
+        unsigned int   pcifunc;
+
+        int            accel;
+        unsigned short subsysvendor;
+        unsigned short subsysdevice;
+
+        char reserved[236];
+};
+
+
+extern struct video_info xgi_video_info;
+
+#ifdef __KERNEL__
+//extern void xgi_malloc(struct xgi_memreq *req);
+extern void xgi_free(unsigned long base);
+extern void xgi_dispinfo(struct ap_data *rec);
+#endif
+#endif
diff --git a/drivers/staging/xgifb/osdef.h b/drivers/staging/xgifb/osdef.h
new file mode 100644
index 00000000000..4bc7d3a7440
--- /dev/null
+++ b/drivers/staging/xgifb/osdef.h
@@ -0,0 +1,153 @@
+#ifndef _OSDEF_H_
+#define _OSDEF_H_
+
+/* #define WINCE_HEADER*/
+/*#define WIN2000*/
+/* #define TC */
+#define LINUX_KERNEL
+/* #define LINUX_XF86 */
+
+/**********************************************************************/
+#ifdef LINUX_KERNEL
+//#include <linux/config.h>
+#endif
+
+
+/**********************************************************************/
+#ifdef TC
+#endif
+#ifdef WIN2000
+#endif
+#ifdef WINCE_HEADER
+#endif
+#ifdef LINUX_XF86
+#define LINUX
+#endif
+#ifdef LINUX_KERNEL
+#define LINUX
+#endif
+
+/**********************************************************************/
+#ifdef TC
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef WIN2000
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) MemFill((PVOID) MemoryAddress,(ULONG) MemorySize,(UCHAR) value);
+#endif
+#ifdef WINCE_HEADER
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef LINUX_XF86
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+/**********************************************************************/
+
+/**********************************************************************/
+
+#ifdef TC
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef WIN2000
+#define XGI_MemoryCopy(Destination,Soruce,Length)  /*VideoPortMoveMemory((PUCHAR)Destination , Soruce,length);*/
+#endif
+#ifdef WINCE_HEADER
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef LINUX_XF86
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+
+/**********************************************************************/
+
+#ifdef OutPortByte
+#undef OutPortByte
+#endif /* OutPortByte */
+
+#ifdef OutPortWord
+#undef OutPortWord
+#endif /* OutPortWord */
+
+#ifdef OutPortLong
+#undef OutPortLong
+#endif /* OutPortLong */
+
+#ifdef InPortByte
+#undef InPortByte
+#endif /* InPortByte */
+
+#ifdef InPortWord
+#undef InPortWord
+#endif /* InPortWord */
+
+#ifdef InPortLong
+#undef InPortLong
+#endif /* InPortLong */
+
+/**********************************************************************/
+/*  TC                                                                */
+/**********************************************************************/
+
+#ifdef TC
+#define OutPortByte(p,v) outp((unsigned short)(p),(unsigned char)(v))
+#define OutPortWord(p,v) outp((unsigned short)(p),(unsigned short)(v))
+#define OutPortLong(p,v) outp((unsigned short)(p),(unsigned long)(v))
+#define InPortByte(p)    inp((unsigned short)(p))
+#define InPortWord(p)    inp((unsigned short)(p))
+#define InPortLong(p)    ((inp((unsigned short)(p+2))<<16) | inp((unsigned short)(p)))
+#endif
+
+/**********************************************************************/
+/*  LINUX XF86                                                        */
+/**********************************************************************/
+
+#ifdef LINUX_XF86
+#define OutPortByte(p,v) outb((CARD16)(p),(CARD8)(v))
+#define OutPortWord(p,v) outw((CARD16)(p),(CARD16)(v))
+#define OutPortLong(p,v) outl((CARD16)(p),(CARD32)(v))
+#define InPortByte(p)    inb((CARD16)(p))
+#define InPortWord(p)    inw((CARD16)(p))
+#define InPortLong(p)    inl((CARD16)(p))
+#endif
+
+#ifdef LINUX_KERNEL
+#define OutPortByte(p,v) outb((u8)(v),(p))
+#define OutPortWord(p,v) outw((u16)(v),(p))
+#define OutPortLong(p,v) outl((u32)(v),(p))
+#define InPortByte(p)    inb(p)
+#define InPortWord(p)    inw(p)
+#define InPortLong(p)    inl(p)
+#endif
+
+/**********************************************************************/
+/*  WIN 2000                                                          */
+/**********************************************************************/
+
+#ifdef WIN2000
+#define OutPortByte(p,v) VideoPortWritePortUchar ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) VideoPortWritePortUshort((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) VideoPortWritePortUlong ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p)    VideoPortReadPortUchar  ((PUCHAR) (p))
+#define InPortWord(p)    VideoPortReadPortUshort ((PUSHORT) (p))
+#define InPortLong(p)    VideoPortReadPortUlong  ((PULONG) (p))
+#endif
+
+
+/**********************************************************************/
+/*  WIN CE                                                          */
+/**********************************************************************/
+
+#ifdef WINCE_HEADER
+#define OutPortByte(p,v) WRITE_PORT_UCHAR ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) WRITE_PORT_USHORT((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) WRITE_PORT_ULONG ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p)    READ_PORT_UCHAR  ((PUCHAR) (p))
+#define InPortWord(p)    READ_PORT_USHORT ((PUSHORT) (p))
+#define InPortLong(p)    READ_PORT_ULONG  ((PULONG) (p))
+#endif
+#endif // _OSDEF_H_
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
new file mode 100644
index 00000000000..17a7ada4926
--- /dev/null
+++ b/drivers/staging/xgifb/vb_def.h
@@ -0,0 +1,1017 @@
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/xgi/initdef.h,v 1.4 2000/12/02 01:16:17 dawes Exp $ */
+#ifndef _INITDEF_
+#define _INITDEF_
+
+#ifndef NewScratch
+#define NewScratch
+#endif
+/* shampoo */
+#ifdef LINUX_KERNEL
+#define SEQ_ADDRESS_PORT	  0x0014
+#define SEQ_DATA_PORT		  0x0015
+#define MISC_OUTPUT_REG_READ_PORT 0x001C
+#define MISC_OUTPUT_REG_WRITE_PORT 0x0012
+#define GRAPH_DATA_PORT		  0x1F
+#define GRAPH_ADDRESS_PORT	  0x1E
+#define XGI_MASK_DUAL_CHIP	  0x04  /* SR3A */
+#define CRTC_ADDRESS_PORT_COLOR   0x0024
+#define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013
+#define PCI_COMMAND		0x04
+#endif
+/* ~shampoo */
+
+
+#define VB_XGI301	      0x0001  /*301b*/
+#define VB_XGI301B        0x0002
+#define VB_XGI302B        0x0004
+#define VB_XGI301LV     0x0008 /*301lv*/
+#define VB_XGI302LV     0x0010
+#define VB_XGI301C      0x0020       /* for 301C */
+#define  VB_NoLCD        0x8000
+/*end 301b*/
+
+#define VB_YPbPrInfo     0x07          /*301lv*/
+#define VB_YPbPr525i     0x00
+#define VB_YPbPr525p     0x01
+#define VB_YPbPr750p     0x02
+#define VB_YPbPr1080i    0x03
+
+/* #define CRT1Len 17 */
+#define LVDSCRT1Len             15
+#define CHTVRegDataLen          5
+
+/* #define ModeInfoFlag 0x07 */
+/* #define IsTextMode 0x07 */
+/* #define ModeText 0x00 */
+/* #define ModeCGA 0x01 */
+/* #define ModeEGA 0x02 */
+/* #define ModeVGA 0x03 */
+/* #define Mode15Bpp 0x04 */
+/* #define Mode16Bpp 0x05 */
+/* #define Mode24Bpp 0x06 */
+/* #define Mode32Bpp 0x07 */
+
+/* #define DACInfoFlag 0x18 */
+/* #define MemoryInfoFlag 0x1E0 */
+/* #define MemorySizeShift 0x05 */
+
+#define Charx8Dot               0x0200
+#define LineCompareOff          0x0400
+#define CRT2Mode                0x0800
+#define HalfDCLK                0x1000
+#define NoSupportSimuTV         0x2000
+#define DoubleScanMode          0x8000
+
+#define SupportAllCRT2          0x0078
+#define SupportTV               0x0008
+#define SupportHiVisionTV       0x0010
+#define SupportLCD              0x0020
+#define SupportRAMDAC2          0x0040
+#define NoSupportTV             0x0070
+#define NoSupportHiVisionTV     0x0060
+#define NoSupportLCD            0x0058
+#define SupportCHTV 		0x0800
+#define SupportCRT2in301C       0x0100       /* for 301C */
+#define SupportTV1024           0x0800  /*301b*/
+#define SupportYPbPr            0x1000  /*301lv*/
+#define InterlaceMode           0x0080
+#define SyncPP                  0x0000
+#define SyncPN                  0x4000
+#define SyncNP                  0x8000
+/* #define SyncNN 0xc000 */
+#define ECLKindex0              0x0000
+#define ECLKindex1              0x0100
+#define ECLKindex2              0x0200
+#define ECLKindex3              0x0300
+#define ECLKindex4              0x0400
+
+#define SetSimuScanMode         0x0001
+#define SwitchToCRT2            0x0002
+/* #define SetCRT2ToTV 0x009C */
+#define SetCRT2ToAVIDEO         0x0004
+#define SetCRT2ToSVIDEO         0x0008
+#define SetCRT2ToSCART          0x0010
+#define SetCRT2ToLCD            0x0020
+#define SetCRT2ToRAMDAC         0x0040
+#define SetCRT2ToHiVisionTV     0x0080
+#define SetNTSCTV               0x0000
+/* #define SetPALTV 0x0100 */
+#define SetInSlaveMode          0x0200
+#define SetNotSimuMode          0x0400
+#define SetNotSimuTVMode        0x0400
+#define SetDispDevSwitch        0x0800
+#define LoadDACFlag             0x1000
+#define DisableCRT2Display      0x2000
+#define DriverMode              0x4000
+#define HotKeySwitch            0x8000
+#define SetCHTVOverScan  	0x8000
+/* #define SetCRT2ToLCDA 0x8000 301b */
+#define PanelRGB18Bit           0x0100
+#define PanelRGB24Bit           0x0000
+
+#define TVOverScan              0x10
+#define TVOverScanShift         4
+#define ClearBufferFlag         0x20
+#define EnableDualEdge 		0x01		/*301b*/
+#define SetToLCDA		0x02
+
+#define YPbPrModeInfo           0x38
+/* #define YPbPrMode525i 0x00 */
+/* #define YPbPrMode525p 0x08 */
+/* #define YPbPrMode750p 0x10 */
+/* #define YPbPrMode1080i 0x18 */
+
+#define SetSCARTOutput          0x01
+#define BoardTVType             0x02
+#define  EnablePALMN           0x40
+/* #define ProgrammingCRT2 0x01 */
+/* #define TVSimuMode 0x02 */
+/* #define RPLLDIV2XO 0x04 */
+/* #define LCDVESATiming 0x08 */
+/* #define EnableLVDSDDA 0x10 */
+#define SetDispDevSwitchFlag    0x20
+#define CheckWinDos             0x40
+#define SetJDOSMode             0x80
+
+#define Panel320x480              0x07/*fstn*/
+/* [ycchen] 02/12/03 Modify for Multi-Sync. LCD Support */
+#define PanelResInfo            0x1F	/* CR36 Panel Type/LCDResInfo */
+#define PanelRefInfo            0x60
+#define Panel800x600            0x01
+#define Panel1024x768           0x02
+#define Panel1024x768x75        0x22
+#define Panel1280x1024          0x03
+#define Panel1280x1024x75       0x23
+#define Panel640x480            0x04
+#define Panel1024x600           0x05
+#define Panel1152x864           0x06
+#define Panel1280x960           0x07
+#define Panel1152x768           0x08
+#define Panel1400x1050          0x09
+#define Panel1280x768           0x0A
+#define Panel1600x1200          0x0B
+
+#define PanelRef60Hz            0x00
+#define PanelRef75Hz            0x20
+#define LCDRGB18Bit             0x01
+
+#define ExtChipTrumpion         0x06
+#define ExtChipCH7005           0x08
+#define ExtChipMitacTV          0x0a
+#define LCDNonExpanding         0x10
+#define LCDNonExpandingShift    4
+#define LCDSync                 0x20
+#define LCDSyncBit              0xe0
+#define LCDSyncShift            6
+
+/* #define DDC2DelayTime 300 */
+
+#define CRT2DisplayFlag         0x2000
+/* #define LCDDataLen 8 */
+/* #define HiTVDataLen 12 */
+/* #define TVDataLen 16 */
+/* #define SetPALTV 0x0100 */
+#define HalfDCLK                0x1000
+#define NTSCHT                  1716
+#define NTSCVT                  525
+#define PALHT                   1728
+#define PALVT                   625
+#define StHiTVHT                892
+#define StHiTVVT                1126
+#define StHiTextTVHT            1000
+#define StHiTextTVVT            1126
+#define ExtHiTVHT               2100
+#define ExtHiTVVT               1125
+
+#define St750pTVHT              1716
+#define St750pTVVT               525
+#define Ext750pTVHT             1716
+#define Ext750pTVVT              525
+#define St525pTVHT              1716
+#define St525pTVVT               525
+#define Ext525pTVHT             1716
+#define Ext525pTVVT              525
+#define St525iTVHT              1716
+#define St525iTVVT               525
+#define Ext525iTVHT             1716
+#define Ext525iTVVT              525
+
+#define VCLKStartFreq           25
+#define SoftDramType            0x80
+#define VCLK40                  0x04
+
+#define VCLK162             	0x21
+
+#define LCDRGB18Bit             0x01
+#define LoadDACFlag             0x1000
+#define AfterLockCRT2           0x4000
+#define SetCRT2ToAVIDEO         0x0004
+#define SetCRT2ToSCART          0x0010
+#define Ext2StructSize          5
+
+
+#define YPbPr525iVCLK           0x03B
+#define YPbPr525iVCLK_2         0x03A
+
+#define SwitchToCRT2            0x0002
+/* #define LCDVESATiming 0x08 */
+#define SetSCARTOutput          0x01
+#define AVIDEOSense             0x01
+#define SVIDEOSense             0x02
+#define SCARTSense              0x04
+#define LCDSense                0x08
+#define Monitor1Sense           0x20
+#define Monitor2Sense           0x10
+#define HiTVSense               0x40
+#define BoardTVType             0x02
+#define HotPlugFunction         0x08
+#define StStructSize            0x06
+
+
+#define XGI_CRT2_PORT_00        0x00 - 0x030
+#define XGI_CRT2_PORT_04        0x04 - 0x030
+#define XGI_CRT2_PORT_10        0x10 - 0x30
+#define XGI_CRT2_PORT_12        0x12 - 0x30
+#define XGI_CRT2_PORT_14        0x14 - 0x30
+
+
+#define LCDNonExpanding         0x10
+#define ADR_CRT2PtrData         0x20E
+#define offset_Zurac            0x210
+#define ADR_LVDSDesPtrData      0x212
+#define ADR_LVDSCRT1DataPtr     0x214
+#define ADR_CHTVVCLKPtr         0x216
+#define ADR_CHTVRegDataPtr      0x218
+
+#define LVDSDataLen             6
+/* #define EnableLVDSDDA 0x10 */
+/* #define LVDSDesDataLen 3 */
+#define ActiveNonExpanding      0x40
+#define ActiveNonExpandingShift 6
+/* #define ActivePAL 0x20 */
+#define ActivePALShift          5
+/* #define ModeSwitchStatus 0x0F */
+#define SoftTVType              0x40
+#define SoftSettingAddr         0x52
+#define ModeSettingAddr         0x53
+
+/* #define SelectCRT1Rate 0x4 */
+
+#define _PanelType00             0x00
+#define _PanelType01             0x08
+#define _PanelType02             0x10
+#define _PanelType03             0x18
+#define _PanelType04             0x20
+#define _PanelType05             0x28
+#define _PanelType06             0x30
+#define _PanelType07             0x38
+#define _PanelType08             0x40
+#define _PanelType09             0x48
+#define _PanelType0A             0x50
+#define _PanelType0B             0x58
+#define _PanelType0C             0x60
+#define _PanelType0D             0x68
+#define _PanelType0E             0x70
+#define _PanelType0F             0x78
+
+
+#define PRIMARY_VGA       0     /* 1: XGI is primary vga 0:XGI is secondary vga */
+#define BIOSIDCodeAddr          0x235
+#define OEMUtilIDCodeAddr       0x237
+#define VBModeIDTableAddr       0x239
+#define OEMTVPtrAddr            0x241
+#define PhaseTableAddr          0x243
+#define NTSCFilterTableAddr     0x245
+#define PALFilterTableAddr      0x247
+#define OEMLCDPtr_1Addr         0x249
+#define OEMLCDPtr_2Addr         0x24B
+#define LCDHPosTable_1Addr      0x24D
+#define LCDHPosTable_2Addr      0x24F
+#define LCDVPosTable_1Addr      0x251
+#define LCDVPosTable_2Addr      0x253
+#define OEMLCDPIDTableAddr      0x255
+
+#define VBModeStructSize        5
+#define PhaseTableSize          4
+#define FilterTableSize         4
+#define LCDHPosTableSize        7
+#define LCDVPosTableSize        5
+#define OEMLVDSPIDTableSize     4
+#define LVDSHPosTableSize       4
+#define LVDSVPosTableSize       6
+
+#define VB_ModeID               0
+#define VB_TVTableIndex         1
+#define VB_LCDTableIndex        2
+#define VB_LCDHIndex            3
+#define VB_LCDVIndex            4
+
+#define OEMLCDEnable            0x0001
+#define OEMLCDDelayEnable       0x0002
+#define OEMLCDPOSEnable         0x0004
+#define OEMTVEnable             0x0100
+#define OEMTVDelayEnable        0x0200
+#define OEMTVFlickerEnable      0x0400
+#define OEMTVPhaseEnable        0x0800
+#define OEMTVFilterEnable       0x1000
+
+#define OEMLCDPanelIDSupport    0x0080
+
+/* #define LCDVESATiming 0x0001 //LCD Info CR37 */
+/* #define EnableLVDSDDA 0x0002 */
+#define EnableScalingLCD        0x0008
+#define SetPWDEnable            0x0004
+#define SetLCDtoNonExpanding    0x0010
+/* #define SetLCDPolarity 0x00E0 */
+#define SetLCDDualLink          0x0100
+#define SetLCDLowResolution     0x0200
+#define SetLCDStdMode           0x0400
+#define SetTVStdMode            0x0200
+#define SetTVLowResolution      0x0400
+/* =============================================================
+   for 310
+============================================================== */
+#define SoftDRAMType        0x80
+#define SoftSetting_OFFSET  0x52
+#define SR07_OFFSET  0x7C
+#define SR15_OFFSET  0x7D
+#define SR16_OFFSET  0x81
+#define SR17_OFFSET  0x85
+#define SR19_OFFSET  0x8D
+#define SR1F_OFFSET  0x99
+#define SR21_OFFSET  0x9A
+#define SR22_OFFSET  0x9B
+#define SR23_OFFSET  0x9C
+#define SR24_OFFSET  0x9D
+#define SR25_OFFSET  0x9E
+#define SR31_OFFSET  0x9F
+#define SR32_OFFSET  0xA0
+#define SR33_OFFSET  0xA1
+
+#define CR40_OFFSET  0xA2
+#define SR25_1_OFFSET  0xF6
+#define CR49_OFFSET  0xF7
+
+#define VB310Data_1_2_Offset  0xB6
+#define VB310Data_4_D_Offset  0xB7
+#define VB310Data_4_E_Offset  0xB8
+#define VB310Data_4_10_Offset 0xBB
+
+#define RGBSenseDataOffset    0xBD
+#define YCSenseDataOffset     0xBF
+#define VideoSenseDataOffset  0xC1
+#define OutputSelectOffset    0xF3
+
+#define ECLK_MCLK_DISTANCE  0x14
+#define VBIOSTablePointerStart    0x200
+#define StandTablePtrOffset       VBIOSTablePointerStart+0x02
+#define EModeIDTablePtrOffset     VBIOSTablePointerStart+0x04
+#define CRT1TablePtrOffset        VBIOSTablePointerStart+0x06
+#define ScreenOffsetPtrOffset     VBIOSTablePointerStart+0x08
+#define VCLKDataPtrOffset         VBIOSTablePointerStart+0x0A
+#define MCLKDataPtrOffset         VBIOSTablePointerStart+0x0E
+#define CRT2PtrDataPtrOffset      VBIOSTablePointerStart+0x10
+#define TVAntiFlickPtrOffset      VBIOSTablePointerStart+0x12
+#define TVDelayPtr1Offset         VBIOSTablePointerStart+0x14
+#define TVPhaseIncrPtr1Offset     VBIOSTablePointerStart+0x16
+#define TVYFilterPtr1Offset       VBIOSTablePointerStart+0x18
+#define LCDDelayPtr1Offset        VBIOSTablePointerStart+0x20
+#define TVEdgePtr1Offset          VBIOSTablePointerStart+0x24
+#define CRT2Delay1Offset          VBIOSTablePointerStart+0x28
+#define LCDDataDesOffset     VBIOSTablePointerStart-0x02
+#define LCDDataPtrOffset          VBIOSTablePointerStart+0x2A
+#define LCDDesDataPtrOffset     VBIOSTablePointerStart+0x2C
+#define LCDDataList		VBIOSTablePointerStart+0x22	/* add for GetLCDPtr */
+#define TVDataList		VBIOSTablePointerStart+0x36	/* add for GetTVPtr */
+/*  */
+/* Modify from 310.inc */
+/*  */
+/*  */
+
+
+#define		ShowMsgFlag                  0x20               /* SoftSetting */
+#define		ShowVESAFlag                 0x10
+#define		HotPlugFunction              0x08
+#define		ModeSoftSetting              0x04
+#define		TVSoftSetting                0x02
+#define		LCDSoftSetting               0x01
+
+#define		GatingCRTinLCDA              0x10
+#define		SetHiTVOutput                0x08
+#define		SetYPbPrOutput               0x04
+#define		BoardTVType                  0x02
+#define		SetSCARTOutput               0x01
+
+#define		ModeSettingYPbPr             0x02               /* TVModeSetting, Others as same as CR30 */
+
+/* TVModeSetting same as CR35 */
+
+/* LCDModeSetting same as CR37 */
+
+#define		EnableNewTVFont              0x10               /* MiscCapability */
+
+#define		EnableLCDOutput              0x80               /* LCDCfgSetting */
+
+#define		SoftDRAMType                 0x80               /* DRAMSetting */
+#define		SoftDRAMConfig               0x40
+#define		MosSelDRAMType               0x20
+#define		SDRAM                        000h
+#define		SGRAM                        0x01
+#define		ESDRAM                       0x02
+
+#define		EnableAGPCfgSetting          0x01               /* AGPCfgSetting */
+
+/* ---------------- SetMode Stack */
+#define		CRT1Len                      15
+#define		VCLKLen                      4
+#define		DefThreshold                 0x0100
+#define		ExtRegsSize                  (57+8+37+70+63+28+768+1)/64+1
+
+#define		VGA_XGI315                   0x0001       /* VGA Type Info */
+#define		VGA_SNewis315e                  0x0002       /* 315 series */
+#define		VGA_XGI550                   0x0004
+#define		VGA_XGI640                   0x0008
+#define		VGA_XGI740                   0x0010
+#define		VGA_XGI650                   0x0020
+#define		VGA_XGI650M                  0x0040
+#define		VGA_XGI651                   0x0080
+#define		VGA_XGI340                   0x0001       /* 340 series */
+#define		VGA_XGI330                   0x0001       /* 330 series */
+#define		VGA_XGI660                   0x0001       /* 660 series */
+
+#define		VB_XGI301                    0x0001       /* VB Type Info */
+#define		VB_XGI301B                   0x0002       /* 301 series */
+#define		VB_XGI302B                   0x0004
+#define		VB_NoLCD                     0x8000
+#define		VB_XGI301LV                  0x0008
+#define		VB_XGI302LV                  0x0010
+#define		VB_LVDS_NS                   0x0001       /* 3rd party chip */
+#define		VB_CH7017                    0x0002
+#define         VB_CH7007                    0x0080       /* [Billy] 07/05/03 */
+/* #define VB_LVDS_SI 0x0004 */
+
+#define		ModeInfoFlag                 0x0007
+#define		IsTextMode                   0x0007
+#define		ModeText                     0x0000
+#define		ModeCGA                      0x0001
+#define		ModeEGA                      0x0002       /* 16 colors mode */
+#define		ModeVGA                      0x0003       /* 256 colors mode */
+#define		Mode15Bpp                    0x0004       /* 15 Bpp Color Mode */
+#define		Mode16Bpp                    0x0005       /* 16 Bpp Color Mode */
+#define		Mode24Bpp                    0x0006       /* 24 Bpp Color Mode */
+#define		Mode32Bpp                    0x0007       /* 32 Bpp Color Mode */
+
+#define		DACInfoFlag                  0x0018
+#define		MONODAC                      0x0000
+#define		CGADAC                       0x0008
+#define		EGADAC                       0x0010
+#define		VGADAC                       0x0018
+
+#define		MemoryInfoFlag               0x01e0
+#define		MemorySizeShift              5
+#define		Need1MSize                   0x0000
+#define		Need2MSize                   0x0020
+#define		Need4MSize                   0x0060
+#define		Need8MSize                   0x00e0
+#define		Need16MSize                  0x01e0
+
+#define		Charx8Dot                    0x0200
+#define		LineCompareOff               0x0400
+#define		CRT2Mode                     0x0800
+#define		HalfDCLK                     0x1000
+#define		NoSupportSimuTV              0x2000
+#define		DoubleScanMode               0x8000
+
+/* -------------- Ext_InfoFlag */
+#define		SupportModeInfo              0x0007
+#define		Support256                   0x0003
+#define		Support15Bpp                 0x0004
+#define		Support16Bpp                 0x0005
+#define		Support24Bpp                 0x0006
+#define		Support32Bpp                 0x0007
+
+#define		SupportAllCRT2               0x0078
+#define		SupportTV                    0x0008
+#define		SupportHiVisionTV            0x0010
+#define		SupportLCD                   0x0020
+#define		SupportRAMDAC2               0x0040
+#define		NoSupportTV                  0x0070
+#define		NoSupportHiVisionTV          0x0060
+#define		NoSupportLCD                 0x0058
+#define		SupportTV1024                0x0800       /* 301btest */
+#define		SupportYPbPr                 0x1000       /* 301lv */
+#define		InterlaceMode                0x0080
+#define		SyncPP                       0x0000
+#define		SyncPN                       0x4000
+#define		SyncNP                       0x8000
+#define		SyncNN                       0xC000
+
+/* -------------- SetMode Stack/Scratch */
+#define		SetSimuScanMode              0x0001       /* VBInfo/CR30 & CR31 */
+#define		SwitchToCRT2                 0x0002
+#define		SetCRT2ToTV1                 0x009C
+#define		SetCRT2ToTV                  0x089C
+#define		SetCRT2ToAVIDEO              0x0004
+#define		SetCRT2ToSVIDEO              0x0008
+#define		SetCRT2ToSCART               0x0010
+#define		SetCRT2ToLCD                 0x0020
+#define		SetCRT2ToRAMDAC              0x0040
+#define		SetCRT2ToHiVisionTV          0x0080
+#define		SetCRT2ToLCDA                0x0100
+#define		SetInSlaveMode               0x0200
+#define		SetNotSimuMode               0x0400
+#define		HKEventMode                  0x0800
+#define		SetCRT2ToYPbPr               0x0800
+#define		LoadDACFlag                  0x1000
+#define		DisableCRT2Display           0x2000
+#define		DriverMode                   0x4000
+#define		SetCRT2ToDualEdge            0x8000
+#define		HotKeySwitch                 0x8000
+
+#define		ProgrammingCRT2              0x0001       /* Set Flag */
+#define		EnableVCMode                 0x0002
+#define		SetHKEventMode               0x0004
+#define		ReserveTVOption              0x0008
+#define		DisableRelocateIO            0x0010
+#define		Win9xDOSMode                 0x0020
+#define		JDOSMode                     0x0040
+/* #define SetWin9xforJap 0x0080 // not used now */
+/* #define SetWin9xforKorea 0x0100 // not used now */
+#define		GatingCRT                    0x0800
+#define		DisableChB                   0x1000
+#define		EnableChB                    0x2000
+#define		DisableChA                   0x4000
+#define		EnableChA                    0x8000
+
+#define		SetNTSCTV                    0x0000       /* TV Info */
+#define		SetPALTV                     0x0001
+#define		SetNTSCJ                     0x0002
+#define		SetPALMTV                    0x0004
+#define		SetPALNTV                    0x0008
+#define		SetCHTVUnderScan             0x0000
+/* #define SetCHTVOverScan 0x0010 */
+#define		SetYPbPrMode525i             0x0020
+#define		SetYPbPrMode525p             0x0040
+#define		SetYPbPrMode750p             0x0080
+#define		SetYPbPrMode1080i            0x0100
+#define		SetTVStdMode                 0x0200
+#define		SetTVLowResolution           0x0400
+#define		SetTVSimuMode                0x0800
+#define		TVSimuMode                   0x0800
+#define		RPLLDIV2XO                   0x1000
+#define		NTSC1024x768                 0x2000
+#define		SetTVLockMode                0x4000
+
+#define		LCDVESATiming                0x0001       /* LCD Info/CR37 */
+#define		EnableLVDSDDA                0x0002
+#define		EnableScalingLCD             0x0008
+#define		SetPWDEnable                 0x0004
+#define		SetLCDtoNonExpanding         0x0010
+#define		SetLCDPolarity               0x00e0
+#define		SetLCDDualLink               0x0100
+#define		SetLCDLowResolution          0x0200
+#define		SetLCDStdMode                0x0400
+
+#define		DefaultLCDCap                0x80ea       /* LCD Capability shampoo */
+#define		RLVDSDHL00                   0x0000
+#define		RLVDSDHL01                   0x0001
+#define		RLVDSDHL10                   0x0002       /* default */
+#define		RLVDSDHL11                   0x0003
+#define		EnableLCD24bpp               0x0004       /* default */
+#define		DisableLCD24bpp              0x0000
+#define		RLVDSClkSFT0                 0x0000
+#define		RLVDSClkSFT1                 0x0008       /* default */
+#define		EnableLVDSDCBal              0x0010
+#define		DisableLVDSDCBal             0x0000       /* default */
+#define		SinglePolarity               0x0020       /* default */
+#define		MultiPolarity                0x0000
+#define		LCDPolarity                  0x00c0       /* default: SyncNN */
+#define		LCDSingleLink                0x0000       /* default */
+#define		LCDDualLink                  0x0100
+#define		EnableSpectrum               0x0200
+#define		DisableSpectrum              0x0000       /* default */
+#define		PWDEnable                    0x0400
+#define		PWDDisable                   0x0000       /* default */
+#define		PWMEnable                    0x0800
+#define		PWMDisable                   0x0000       /* default */
+#define		EnableVBCLKDRVLOW            0x4000
+#define		EnableVBCLKDRVHigh           0x0000       /* default */
+#define		EnablePLLSPLOW               0x8000
+#define		EnablePLLSPHigh              0x0000       /* default */
+
+#define		LCDBToA                      0x20               /* LCD SetFlag */
+#define		StLCDBToA                    0x40
+#define		LockLCDBToA                  0x80
+#define 	LCDToFull             	     0x10
+#define		AVIDEOSense                  0x01               /* CR32 */
+#define		SVIDEOSense                  0x02
+#define		SCARTSense                   0x04
+#define		LCDSense                     0x08
+#define		Monitor2Sense                0x10
+#define		Monitor1Sense                0x20
+#define		HiTVSense                    0x40
+
+#ifdef                   NewScratch
+#define		YPbPrSense                   0x80    /* NEW SCRATCH */
+#endif
+
+#define		TVSense                      0xc7
+
+#define		TVOverScan                   0x10               /* CR35 */
+#define		TVOverScanShift              4
+
+#ifdef                   NewScratch
+#define		NTSCMode                     0x00
+#define		PALMode                      0x00
+#define		NTSCJMode                    0x02
+#define		PALMNMode                    0x0c
+#define		YPbPrMode                    0xe0
+#define		YPbPrMode525i                0x00
+#define		YPbPrMode525p                0x20
+#define		YPbPrMode750p                0x40
+#define		YPbPrMode1080i               0x60
+#else                    /* Old Scratch */
+#define		ClearBufferFlag              0x20
+#endif
+
+
+#define		LCDRGB18Bit                  0x01               /* CR37 */
+#define		LCDNonExpanding              0x10
+#define		LCDNonExpandingShift         4
+#define		LCDSync                      0x20
+#define		LCDSyncBit                   0xe0               /* H/V polarity & sync ID */
+#define		LCDSyncShift                 6
+
+#ifdef                   NewScratch
+#define		ScalingLCD                   0x08
+#else                    /* Old Scratch */
+#define		ExtChipType                  0x0e
+#define		ExtChip301                   0x02
+#define		ExtChipLVDS                  0x04
+#define		ExtChipCH7019                0x06
+#define		ScalingLCD                   0x10
+#endif
+
+#define		EnableDualEdge               0x01               /* CR38 */
+#define		SetToLCDA                    0x02
+#ifdef                   NewScratch
+#define		SetYPbPr                     0x04
+#define		DisableChannelA              0x08
+#define		DisableChannelB              0x10
+#define		ExtChipType                  0xe0
+#define		ExtChip301                   0x20
+#define		ExtChipLVDS                  0x40
+#define		ExtChipCH7019                0x60
+#else                    /* Old Scratch */
+#define		YPbPrSense                   0x04
+#define		SetYPbPr                     0x08
+#define		YPbPrMode                    0x30
+#define		YPbPrMode525i                0x00
+#define		YPbPrMode525p                0x10
+#define		YPbPrMode750p                0x20
+#define		YPbPrMode1080i               0x30
+#define		PALMNMode                    0xc0
+#endif
+
+#define		BacklightControlBit          0x01               /* CR3A */
+#define		Win9xforJap                  0x40
+#define		Win9xforKorea                0x80
+
+#define		ForceMDBits                  0x07               /* CR3B */
+#define		ForceMD_JDOS                 0x00
+#define		ForceMD_640x400T             0x01
+#define		ForceMD_640x350T             0x02
+#define		ForceMD_720x400T             0x03
+#define		ForceMD_640x480E             0x04
+#define		ForceMD_640x400E             0x05
+#define		ForceP1Bit                   0x10
+#define		ForceP2Bit                   0x20
+#define		EnableForceMDinBIOS          0x40
+#define		EnableForceMDinDrv           0x80
+
+#ifdef                   NewScratch                      /* New Scratch */
+/* ---------------------- VUMA Information */
+#define		LCDSettingFromCMOS           0x04               /* CR3C */
+#define		TVSettingFromCMOS            0x08
+#define		DisplayDeviceFromCMOS        0x10
+#define		HKSupportInSBIOS             0x20
+#define		OSDSupportInSBIOS            0x40
+#define		DisableLogo                  0x80
+
+/* ---------------------- HK Evnet Definition */
+#define		HKEvent                      0x0f               /* CR3D */
+#define		HK_ModeSwitch                0x01
+#define		HK_Expanding                 0x02
+#define		HK_OverScan                  0x03
+#define		HK_Brightness                0x04
+#define		HK_Contrast                  0x05
+#define		HK_Mute                      0x06
+#define		HK_Volume                    0x07
+#define		ModeSwitchStatus             0xf0
+#define		ActiveCRT1                   0x10
+#define		ActiveLCD                    0x0020
+#define		ActiveTV                     0x40
+#define		ActiveCRT2                   0x80
+
+#define		TVSwitchStatus               0x1f               /* CR3E */
+#define		ActiveAVideo                 0x01
+#define		ActiveSVideo                 0x02
+#define		ActiveSCART                  0x04
+#define		ActiveHiTV                   0x08
+#define		ActiveYPbPr                  0x10
+
+#define		EnableHKEvent                0x01               /* CR3F */
+#define		EnableOSDEvent               0x02
+#define		StartOSDEvent                0x04
+#define		IgnoreHKEvent                0x08
+#define		IgnoreOSDEvent               0x10
+#else                    /* Old Scratch */
+#define		OSD_SBIOS                    0x02       /* SR17 */
+#define		DisableLogo                  0x04
+#define		SelectKDOS                   0x08
+#define		KorWinMode                   0x10
+#define		KorMode3Bit                  0x0020
+#define		PSCCtrlBit                  0x40
+#define		NPSCCtrlBitShift             6
+#define		BlueScreenBit                0x80
+
+#define		HKEvent                      0x0f       /* CR79 */
+#define		HK_ModeSwitch                0x01
+#define		HK_Expanding                 0x02
+#define		HK_OverScan                  0x03
+#define		HK_Brightness                0x04
+#define		HK_Contrast                  0x05
+#define		HK_Mute                      0x06
+#define		HK_Volume                    0x07
+#define		ActivePAL                    0x0020
+#define		ActivePALShift               5
+#define		ActiveNonExpanding           0x40
+#define		ActiveNonExpandingShift      6
+#define		ActiveOverScan               0x80
+#define		ActiveOverScanShift          7
+
+#define		ModeSwitchStatus             0x0b       /* SR15 */
+#define		ActiveCRT1                   0x01
+#define		ActiveLCD                    0x02
+#define		ActiveCRT2                   0x08
+
+#define		TVSwitchStatus               0xf0       /* SR16 */
+#define		TVConfigShift                3
+#define		ActiveTV                     0x01
+#define		ActiveYPbPr                  0x04
+#define		ActiveAVideo                 0x10
+#define		ActiveSVideo                 0x0020
+#define		ActiveSCART                  0x40
+#define		ActiveHiTV                   0x80
+
+#define		EnableHKEvent                0x01       /* CR7A */
+#define		EnableOSDEvent               0x02
+#define		StartOSDEvent                0x04
+#define		CMOSSupport                  0x08
+#define		HotKeySupport                0x10
+#define		IngoreHKOSDEvent             0x20
+#endif
+
+/* //------------- Misc. Definition */
+#define		SelectCRT1Rate               00h
+/* #define SelectCRT2Rate 04h */
+
+#define		DDC1DelayTime                1000
+#ifdef           TRUMPION
+#define		DDC2DelayTime                15
+#else
+#define		DDC2DelayTime                150
+#endif
+
+#define		R_FACTOR                     04Dh
+#define		G_FACTOR                     097h
+#define		B_FACTOR                     01Ch
+/* --------------------------------------------------------- */
+/* translated from asm code 301def.h */
+/*  */
+/* --------------------------------------------------------- */
+#define		LCDDataLen                   8
+#define		HiTVDataLen                  12
+#define		TVDataLen                    12
+#define		LVDSCRT1Len_H                8
+#define		LVDSCRT1Len_V                7
+#define		LVDSDataLen                  6
+#define		LVDSDesDataLen               6
+#define		LCDDesDataLen                6
+#define		LVDSDesDataLen2              8
+#define		LCDDesDataLen2               8
+#define		CHTVRegLen                   16
+#define		CHLVRegLen                   12
+
+#define		StHiTVHT                     892
+#define		StHiTVVT                     1126
+#define		StHiTextTVHT                 1000
+#define		StHiTextTVVT                 1126
+#define		ExtHiTVHT                    2100
+#define		ExtHiTVVT                    1125
+#define		NTSCHT                       1716
+#define		NTSCVT                        525
+#define		NTSC1024x768HT               1908
+#define		NTSC1024x768VT                525
+#define		PALHT                        1728
+#define		PALVT                         625
+
+#define		YPbPrTV525iHT                1716            /* YPbPr */
+#define		YPbPrTV525iVT                 525
+#define		YPbPrTV525pHT                1716
+#define		YPbPrTV525pVT                 525
+#define		YPbPrTV750pHT                1650
+#define		YPbPrTV750pVT                 750
+
+#define		CRT2VCLKSel                  0xc0
+
+#define		CRT2Delay1      	     0x04            /* XGI301 */
+#define		CRT2Delay2      	     0x0A            /* 301B,302 */
+
+
+#define		VCLK25_175           0x00
+#define		VCLK28_322           0x01
+#define		VCLK31_5             0x02
+#define		VCLK36               0x03
+#define		VCLK40               0x04
+#define		VCLK43_163           0x05
+#define		VCLK44_9             0x06
+#define		VCLK49_5             0x07
+#define		VCLK50               0x08
+#define		VCLK52_406           0x09
+#define		VCLK56_25            0x0A
+#define		VCLK65               0x0B
+#define		VCLK67_765           0x0C
+#define		VCLK68_179           0x0D
+#define		VCLK72_852           0x0E
+#define		VCLK75               0x0F
+#define		VCLK75_8             0x10
+#define		VCLK78_75            0x11
+#define		VCLK79_411           0x12
+#define		VCLK83_95            0x13
+#define		VCLK84_8             0x14
+#define		VCLK86_6             0x15
+#define		VCLK94_5             0x16
+#define		VCLK104_998          0x17
+#define		VCLK105_882          0x18
+#define		VCLK108_2            0x19
+#define		VCLK109_175          0x1A
+#define		VCLK113_309          0x1B
+#define		VCLK116_406          0x1C
+#define		VCLK132_258          0x1D
+#define		VCLK135_5            0x1E
+#define		VCLK139_054          0x1F
+#define		VCLK157_5            0x20
+#define		VCLK162              0x21
+#define		VCLK175              0x22
+#define		VCLK189              0x23
+#define		VCLK194_4            0x24
+#define		VCLK202_5            0x25
+#define		VCLK229_5            0x26
+#define		VCLK234              0x27
+#define		VCLK252_699          0x28
+#define		VCLK254_817          0x29
+#define		VCLK265_728          0x2A
+#define		VCLK266_952          0x2B
+#define		VCLK269_655          0x2C
+#define		VCLK272_042          0x2D
+#define		VCLK277_015          0x2E
+#define		VCLK286_359          0x2F
+#define		VCLK291_132          0x30
+#define		VCLK291_766          0x31
+#define		VCLK309_789          0x32
+#define		VCLK315_195          0x33
+#define		VCLK323_586          0x34
+#define		VCLK330_615          0x35
+#define		VCLK332_177          0x36
+#define		VCLK340_477          0x37
+#define		VCLK375_847          0x38
+#define		VCLK388_631          0x39
+#define		VCLK125_999          0x51
+#define		VCLK148_5            0x52
+#define		VCLK178_992          0x54
+#define		VCLK217_325          0x55
+#define		VCLK299_505          0x56
+#define		YPbPr750pVCLK        0x57
+
+#define		TVVCLKDIV2              0x3A
+#define		TVVCLK                  0x3B
+#define		HiTVVCLKDIV2          0x3C
+#define		HiTVVCLK              0x3D
+#define		HiTVSimuVCLK          0x3E
+#define		HiTVTextVCLK          0x3F
+#define		VCLK39_77              0x40
+/* #define YPbPr750pVCLK 0x0F */
+#define		YPbPr525pVCLK           0x3A
+/* #define ;;YPbPr525iVCLK 0x3B */
+/* #define ;;YPbPr525iVCLK_2 0x3A */
+#define		NTSC1024VCLK         0x41
+#define		VCLK25_175_41        0x42                  /* ; ScaleLCD */
+#define		VCLK25_175_42        0x43
+#define		VCLK28_322_43        0x44
+#define		VCLK40_44            0x45
+#define		VCLKQVGA_1           0x46                   /* ; QVGA */
+#define		VCLKQVGA_2           0x47
+#define		VCLKQVGA_3           0x48
+#define		VCLK35_2             0x49                    /* ; 800x480 */
+#define		VCLK122_61           0x4A
+#define		VCLK80_350           0x4B
+#define		VCLK107_385          0x4C
+
+#define		CHTVVCLK30_2         0x50                 /* ;;CHTV */
+#define		CHTVVCLK28_1         0x51
+#define		CHTVVCLK43_6         0x52
+#define		CHTVVCLK26_4         0x53
+#define		CHTVVCLK24_6         0x54
+#define		CHTVVCLK47_8         0x55
+#define		CHTVVCLK31_5         0x56
+#define		CHTVVCLK26_2         0x57
+#define		CHTVVCLK39           0x58
+#define		CHTVVCLK36           0x59
+
+#define		CH7007TVVCLK30_2     0x00                 /* [Billy] 2007/05/18 For CH7007 */
+#define		CH7007TVVCLK28_1     0x01
+#define		CH7007TVVCLK43_6     0x02
+#define		CH7007TVVCLK26_4     0x03
+#define		CH7007TVVCLK24_6     0x04
+#define		CH7007TVVCLK47_8     0x05
+#define		CH7007TVVCLK31_5     0x06
+#define		CH7007TVVCLK26_2     0x07
+#define		CH7007TVVCLK39       0x08
+#define		CH7007TVVCLK36       0x09
+
+#define		RES320x200                   0x00
+#define		RES320x240                   0x01
+#define		RES400x300                   0x02
+#define		RES512x384                   0x03
+#define		RES640x400                   0x04
+#define		RES640x480x60                0x05
+#define		RES640x480x72                0x06
+#define		RES640x480x75                0x07
+#define		RES640x480x85                0x08
+#define		RES640x480x100               0x09
+#define		RES640x480x120               0x0A
+#define		RES640x480x160               0x0B
+#define		RES640x480x200               0x0C
+#define		RES800x600x56                0x0D
+#define		RES800x600x60                0x0E
+#define		RES800x600x72                0x0F
+#define		RES800x600x75                0x10
+#define		RES800x600x85                0x11
+#define		RES800x600x100               0x12
+#define		RES800x600x120               0x13
+#define		RES800x600x160               0x14
+#define		RES1024x768x43               0x15
+#define		RES1024x768x60               0x16
+#define		RES1024x768x70               0x17
+#define		RES1024x768x75               0x18
+#define		RES1024x768x85               0x19
+#define		RES1024x768x100              0x1A
+#define		RES1024x768x120              0x1B
+#define		RES1280x1024x43              0x1C
+#define		RES1280x1024x60              0x1D
+#define		RES1280x1024x75              0x1E
+#define		RES1280x1024x85              0x1F
+#define		RES1600x1200x60              0x20
+#define		RES1600x1200x65              0x21
+#define		RES1600x1200x70              0x22
+#define		RES1600x1200x75              0x23
+#define		RES1600x1200x85              0x24
+#define		RES1600x1200x100             0x25
+#define		RES1600x1200x120             0x26
+#define		RES1920x1440x60              0x27
+#define		RES1920x1440x65              0x28
+#define		RES1920x1440x70              0x29
+#define		RES1920x1440x75              0x2A
+#define		RES1920x1440x85              0x2B
+#define		RES1920x1440x100             0x2C
+#define		RES2048x1536x60              0x2D
+#define		RES2048x1536x65              0x2E
+#define		RES2048x1536x70              0x2F
+#define		RES2048x1536x75              0x30
+#define		RES2048x1536x85              0x31
+#define		RES800x480x60                0x32
+#define		RES800x480x75                0x33
+#define		RES800x480x85                0x34
+#define		RES1024x576x60               0x35
+#define		RES1024x576x75               0x36
+#define		RES1024x576x85               0x37
+#define		RES1280x720x60               0x38
+#define		RES1280x720x75               0x39
+#define		RES1280x720x85               0x3A
+#define		RES1280x960x60               0x3B
+#define		RES720x480x60                0x3C
+#define		RES720x576x56                0x3D
+#define		RES856x480x79I               0x3E
+#define		RES856x480x60                0x3F
+#define		RES1280x768x60               0x40
+#define		RES1400x1050x60              0x41
+#define		RES1152x864x60               0x42
+#define		RES1152x864x75               0x43
+#define		RES1024x768x160              0x44
+#define		RES1280x960x75               0x45
+#define		RES1280x960x85               0x46
+#define		RES1280x960x120              0x47
+
+#define 	LFBDRAMTrap                  0x30
+#endif
diff --git a/drivers/staging/xgifb/vb_ext.c b/drivers/staging/xgifb/vb_ext.c
new file mode 100644
index 00000000000..49b39ee93a8
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.c
@@ -0,0 +1,1370 @@
+#include "osdef.h"
+
+
+
+
+#ifdef WIN2000
+
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif /* WIN2000 */
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <asm/io.h>
+#include <linux/types.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_ext.h"
+extern   UCHAR XGI330_SoftSetting;
+extern   UCHAR XGI330_OutputSelect;
+extern   USHORT XGI330_RGBSenseData2;
+extern   USHORT XGI330_YCSenseData2;
+extern   USHORT XGI330_VideoSenseData2;
+#ifdef WIN2000
+extern   UCHAR SenseCHTV(PHW_DEVICE_EXTENSION pHWDE);       /* 2007/05/17 Billy */
+#endif
+void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+BOOLEAN  XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGINew_GetLCDDDCInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+BOOLEAN  XGINew_BridgeIsEnable(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo );
+BOOLEAN  XGINew_Sense(USHORT tempbx,USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+
+/**************************************************************
+	Dynamic Sense
+*************************************************************/
+
+void XGI_WaitDisplay(void);
+BOOLEAN XGI_Is301C(PVB_DEVICE_INFO);
+BOOLEAN XGI_Is301LV(PVB_DEVICE_INFO);
+
+#ifdef WIN2000
+UCHAR XGI_SenseLCD(PHW_DEVICE_EXTENSION, PVB_DEVICE_INFO);
+UCHAR XGI_GetLCDDDCInfo(PHW_DEVICE_EXTENSION,PVB_DEVICE_INFO);
+
+extern BOOL bGetDdcInfo(
+PHW_DEVICE_EXTENSION  pHWDE,
+ULONG                 ulWhichOne,
+PUCHAR                pjQueryBuffer,
+ULONG                 ulBufferSize
+   );
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Is301B */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Is301B( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT flag ;
+
+    flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+
+    if ( flag > 0x0B0 )
+        return( 0 ) ;	/* 301b */
+    else
+        return( 1 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301C */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301C( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) & 0xF0 ) == 0xC0 )
+        return( 1 ) ;
+
+    if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+    {
+        if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xE0 )
+            return( 1 ) ;
+    }
+
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301LV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301LV( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+    {
+        if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xFF )
+        {
+            return( 1 ) ;
+        }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Sense(  USHORT tempbx , USHORT tempcx, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , i , tempch ;
+
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait( pVBInfo) ;
+
+    tempch = ( tempcx & 0x7F00 ) >> 8 ;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp > 0 )
+        return( 1 ) ;
+    else
+        return( 0 ) ;
+}
+
+#ifdef WIN2000
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SenseLCD( PHW_DEVICE_EXTENSION pHWDE, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax , tempbx , tempcx ;
+    UCHAR SoftSetting = XGI330_SoftSetting ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV ) )
+        return( 1 ) ;
+
+
+    if ( SoftSetting & HotPlugFunction )	/* Hot Plug Detection */
+    {
+        XGINew_SetRegAND( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+        tempbx = 0 ;
+        tempcx = 0x9010 ;
+        if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+            return( 1 ) ;
+
+        return( 0 ) ;
+    }
+    else	/* Get LCD Info from EDID */
+        return(XGI_GetLCDDDCInfo(pHWDE, pVBInfo));
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetLCDDDCInfo( PHW_DEVICE_EXTENSION pHWDE , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR tempah , tempbl , tempbh ;
+    USHORT tempbx , temp ;
+    UCHAR pjEDIDBuf[ 256 ] ;
+    ULONG ulBufferSize = 256 ;
+    UCHAR bMASK_OUTPUTSTATE_CRT2LCD = 2 ; /* 0423 shampoo */
+
+    bGetDdcInfo( pHWDE , MASK_OUTPUTSTATE_CRT2LCD , pjEDIDBuf , ulBufferSize ) ;
+    if ( ( *( ( PULONG )pjEDIDBuf ) == 0xFFFFFF00 ) && ( *( ( PULONG )( pjEDIDBuf + 4 ) ) == 0x00FFFFFF ) )
+    {
+        tempah = Panel1024x768 ;
+        tempbl=( *( pjEDIDBuf + 0x3A ) ) & 0xf0 ;
+
+        if ( tempbl != 0x40 )
+        {
+            tempah = Panel1600x1200 ;
+            if ( tempbl != 0x60 )
+            {
+                tempah = Panel1280x1024 ;
+                tempbh = ( *( pjEDIDBuf + 0x3B ) ) ;
+                if ( tempbh != 0x00 )
+                {
+                    tempah = Panel1280x960 ;
+                    if ( tempbh != 0x0C0 )
+                    {
+                        tempbx = ( ( *( pjEDIDBuf + 0x24 ) ) << 8 ) | ( *( pjEDIDBuf + 0x23 ) ) ;
+                        tempah = Panel1280x1024 ;
+                        if ( !( tempbx & 0x0100 ) )
+                        {
+                            tempah = Panel1024x768 ;
+                            if ( !( tempbx & 0x0E00 ) )
+                            {
+                                tempah = Panel1280x1024 ;
+                            }
+                        }
+                    }
+
+                    if ( tempbx & 0x00FF )
+                    {
+                        temp = ScalingLCD ;
+                        XGINew_SetRegOR( pVBInfo->P3d4 , 0x37 , temp ) ;
+                    }
+                }
+            }
+        }
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+        tempah = ( ( *( pjEDIDBuf + 0x47 ) ) & 0x06 ) ;		/* Polarity */
+        tempah = ( tempah ^ 0x06 ) << 4 ;
+        tempah |= LCDSync ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ( ~LCDSyncBit ) , tempah ) ;
+        tempbh= XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+        tempbh &= 0x07 ;
+        if ( tempbh == Panel1280x960 )
+            XGINew_SetRegAND( pVBInfo->P3d4 , 0x37 , 0x0E ) ;
+    }
+    else if ( *pjEDIDBuf == 0x20 )
+    {
+        tempah = Panel1024x768 ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+    }
+    else
+    {
+        return( 0 ) ;
+    }
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DySense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus)
+{
+    UCHAR pre_CRD,pre_SR1E , pre_Part2_0 , pre_Part4_D ;
+    USHORT tempax , tempbx , tempcx , pushax , temp ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    UCHAR OutputSelect = XGI330_OutputSelect ;
+    PXGI_HW_DEVICE_INFO HwDeviceExtension= pHWDE->pXGIHWDE ;
+    UCHAR   bConnectStatus = 0 ;
+    pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ROMAddr  = pHWDE->pjVirtualRomBase ;
+
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pushax = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;	/* 0512 Fix Dysense hanged */
+    temp = ( pushax & 0x00FF ) | 0x80 ;
+    XGINew_SetRegOR( pVBInfo->P3d4 , 0x17 , temp ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+    /* beginning of dynamic sense CRT1 */
+
+    pVBInfo->IF_DEF_CH7007 = 0;
+    if (pHWDE->bCH7007)
+    {
+    	InitTo330Pointer( pHWDE->pXGIHWDE->jChipType, pVBInfo ) ;
+        HwDeviceExtension->pDevice = (PVOID)pHWDE;
+        pVBInfo->IF_DEF_CH7007 = 1;
+        /* [Billy] 2007/05/14 For CH7007 */
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+           bConnectStatus = SenseCHTV(HwDeviceExtension->pDevice) ; /* 07/05/28 */
+           XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0x03 , (UCHAR)bConnectStatus ) ;
+        }
+    }
+    if(( pHWDE->jChipID >= XG40 ) || ( pHWDE->jChipID >= XG20 ))
+    {
+
+        if ( pHWDE->jChipID >= XG40 )
+    	    XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;	/* write sense pattern 30->4a */
+    	else
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x5F ) ;	/* write sense pattern */
+
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x53 , 0xFF , 0x02 ) ;	/* enable sense DAC */
+        XGI_WaitDisply(pVBInfo) ;
+
+        if(XGINew_GetReg2( pVBInfo->P3c2 ) & 0x10 )
+            bConnectStatus |= Monitor1Sense ;
+
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0x53 , 0xFD ) ;	/* disable sense DAC */
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0x57 , 0x00 ) ;	/* clear sense pattern */
+
+
+        /* ---------- End of dynamic sense CRT1 ----------- */
+
+        /* ---------- beginning of dynamic sense VB ------------ */
+        pre_SR1E = XGINew_GetReg1( pVBInfo->P3c4 , 0x1E ) ;
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;	/* Enable CRT2,work-a-round for 301B/301LV/302LV */
+        pre_Part2_0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+        pre_Part4_D = XGINew_GetReg1( pVBInfo->Part4Port , 0x0D ) ;
+
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+            XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x07 , 0x01 ) ;	/* Set Part4 0x0D D[2:0] to 001b */
+
+        /* tempax = 0 ; */
+        if ( !XGI_Is301LV( pVBInfo ) )
+        {
+           tempbx = XGI330_RGBSenseData2 ;
+            tempcx = 0x0E08 ;
+            if(XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+            {
+                bConnectStatus |= Monitor2Sense ;
+                if ( OutputSelect & SetSCARTOutput )
+                {
+                    bConnectStatus ^= ( Monitor2Sense | SCARTSense ) ;
+                }
+            }
+        }
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x04 ) ;	/* Set Part4 0x0D D[2]=1 for dynamic sense */
+
+        if ( ( XGINew_Is301B( pVBInfo ) ) )
+            XGINew_SetRegOR( pVBInfo->Part2Port , 0x00 , 0x0C ) ;    /* ????????? */
+
+	if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) )		/* add by kuku for Dysense HiTV //start */
+	{
+	    bConnectStatus|= YPbPrSense ;
+	}
+	else
+	{
+        tempbx = XGI330_YCSenseData2 ;	/* Y/C Sense Data Ptr */
+        tempcx = 0x0604 ;
+        if ( XGINew_Sense( tempbx , tempcx , pVBInfo) )
+            bConnectStatus |= SVIDEOSense ;
+
+        if ( OutputSelect & BoardTVType )
+        {
+            tempbx = XGI330_VideoSenseData2 ;
+            tempcx = 0x0804 ;
+            if ( XGINew_Sense(tempbx , tempcx, pVBInfo) )
+                bConnectStatus|= AVIDEOSense ;
+        }
+        else
+        {
+            if ( !( bConnectStatus & SVIDEOSense ) )
+            {
+                tempbx = XGI330_VideoSenseData2 ;
+                tempcx = 0x0804 ;
+                if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+                    bConnectStatus |= AVIDEOSense ;
+            }
+        }
+    	} /* end */
+        /* DySenseVBCnt */
+
+        tempbx = 0 ;
+        tempcx = 0 ;
+        XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+        if ( !( bConnectStatus & Monitor2Sense ) )
+        {
+            if ( XGI_SenseLCD( pHWDE , pVBInfo ) )
+                bConnectStatus |= LCDSense ;
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~( AVIDEOSense | SVIDEOSense | LCDSense | Monitor2Sense | Monitor1Sense ) , bConnectStatus ) ;
+
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , pre_Part4_D ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , pre_Part2_0 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x1E , pre_SR1E ) ;
+
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+        {
+            tempax = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+            if ( tempax & 0x20 )
+            {
+                /* Reset VBPro */
+                for( tempcx = 2 ; tempcx > 0 ; tempcx-- )
+                {
+                    tempax ^= 0x20 ;
+                    XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , tempax ) ;
+                }
+            }
+        }
+        /* End of dynamic sense VB */
+    }
+    else
+    {
+        XGI_SenseCRT1(pVBInfo) ;
+        XGI_GetSenseStatus( HwDeviceExtension, pVBInfo ) ;	/* sense CRT2 */
+        bConnectStatus = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+    }
+    temp = pushax & 0x00FF ;		/* 0512 Fix Dysense hanged */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , temp ) ;
+    if ( bConnectStatus )
+    {
+        *ujConnectStatus = bConnectStatus ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+#endif /* WIN2000 */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetDPMS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
+{
+    USHORT ModeNo, ModeIdIndex ;
+    UCHAR  temp ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->BaseAddr = (ULONG)pXGIHWDE->pjIOAddress ;
+    pVBInfo->ROMAddr  = pXGIHWDE->pjVirtualRomBase ;
+
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_HiVision = 1 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_YPbPr = 1 ;
+    pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+    InitTo330Pointer( pXGIHWDE->jChipType,  pVBInfo ) ;
+    ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+          if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+          {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+          }
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_CH7007 == 0 )
+    {
+        XGINew_SetModeScratch ( pXGIHWDE , pVBInfo ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;	/* 1.Openkey */
+    XGI_UnLockCRT2( pXGIHWDE , pVBInfo) ;
+    ModeNo = XGINew_GetReg1( pVBInfo->P3d4 , 0x34 ) ;
+    XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+    XGI_GetVGAType( pXGIHWDE , pVBInfo ) ;
+
+    if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) || ( pVBInfo->IF_DEF_CH7007 == 1 ))
+    {
+        XGI_GetVBType( pVBInfo ) ;
+        XGI_GetVBInfo( ModeNo , ModeIdIndex , pXGIHWDE, pVBInfo ) ;
+        XGI_GetTVInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_GetLCDInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    }
+
+    if ( VESA_POWER_STATE == 0x00000400 )
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) & 0xFE ) ) ;
+    else
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) | 0x01 ) ) ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1f ) ;
+    temp &= 0x3f ;
+    switch ( VESA_POWER_STATE )
+    {
+        case 0x00000000: /* on */
+            if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x00 ) ) ;
+                XGI_EnableBridge( pXGIHWDE, pVBInfo ) ;
+            }
+            else
+            {
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 if ( pVBInfo->IF_DEF_LVDS == 1 )
+                 {
+                   XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+                   XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+                 }
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 if ( pVBInfo->IF_DEF_LVDS == 1 )
+                 {
+                   XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+                   XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+                 }
+               }
+               XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0x00 ) ;
+               XGINew_SetRegAND( pVBInfo->P3c4 , 0x01 , ~0x20 ) ;		/* CRT on */
+
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;	/* DVO ON */
+                   XGI_SetXG21FPBits( pVBInfo );
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ 	/* LCD Display ON */
+                 }
+                 XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+                 XGI_DisplayOn( pXGIHWDE, pVBInfo );
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;	/* DVO ON */
+                   XGI_SetXG27FPBits( pVBInfo );
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ 	/* LCD Display ON */
+                 }
+                 XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+                 XGI_DisplayOn( pXGIHWDE, pVBInfo );
+               }
+            }
+            break ;
+        case 0x00000100: /* standby */
+            if ( pXGIHWDE->jChipType >= XG21 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+            }
+
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x40 ) ) ;
+            break ;
+        case 0x00000200: /* suspend */
+            if ( pXGIHWDE->jChipType == XG21 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+                XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+            }
+            if ( pXGIHWDE->jChipType == XG27 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+                XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+            }
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x80 ) ) ;
+            break ;
+        case 0x00000400: /* off */
+            if ( (pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0xc0 ) ) ;
+                XGI_DisableBridge( pXGIHWDE, pVBInfo ) ;
+            }
+            else
+            {
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+                 XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ;		/* DVO Off */
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ 		/* LCD Display OFF */
+                 }
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+                 XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ;		/* DVO Off */
+                 }
+               }
+               XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0xC0 ) ;
+               XGINew_SetRegOR( pVBInfo->P3c4 , 0x01 , 0x20 ) ;		/* CRT Off */
+
+               if ( ( pXGIHWDE->jChipType == XG21 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+               {
+                 XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+                 XGI_XG21BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+                 XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+               }
+               if ( ( pXGIHWDE->jChipType == XG27 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+               {
+                 XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+                 XGI_XG27BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+                 XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+               }
+            }
+            break ;
+
+        default:
+            break ;
+    }
+    XGI_LockCRT2( pXGIHWDE , pVBInfo ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax = 0 , tempbx , tempcx , temp ,
+           P2reg0 = 0 , SenseModeNo = 0 , OutputSelect = *pVBInfo->pOutputSelect ,
+           ModeIdIndex , i ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;	/* ynlai 02/27/2002 */
+        tempbx = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+        tempax = ( ( tempax & 0xFE ) >> 1 ) | ( tempbx << 8 ) ;
+        if ( tempax == 0x00 )
+        {		/* Get Panel id from DDC */
+            temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+            if ( temp == 1 )
+            {		/* LCD connect */
+                XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x39 , 0xFF , 0x01 ) ;	/* set CR39 bit0="1" */
+                XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , 0xEF , 0x00 ) ;	/* clean CR37 bit4="0" */
+                temp = LCDSense ;
+            }
+            else
+            {		/* LCD don't connect */
+                temp = 0 ;
+            }
+        }
+        else
+        {
+            XGINew_GetPanelID(pVBInfo) ;
+            temp = LCDSense ;
+        }
+
+        tempbx = ~( LCDSense | AVIDEOSense | SVIDEOSense ) ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , tempbx , temp ) ;
+    }
+    else
+    {		/* for 301 */
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {	/* for HiVision */
+            tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+            temp = tempax & 0x01 ;
+            tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+            temp = temp | ( tempax & 0x02 ) ;
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xA0 , temp ) ;
+        }
+        else
+        {
+            if ( XGI_BridgeIsOn( pVBInfo ) )
+            {
+                P2reg0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+                if ( !XGINew_BridgeIsEnable( HwDeviceExtension, pVBInfo ) )
+                {
+                    SenseModeNo = 0x2e ;
+                    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x41 ) ; */
+                    /* XGISetModeNew( HwDeviceExtension , 0x2e ) ; // ynlai InitMode */
+
+                    temp = XGI_SearchModeID( SenseModeNo , &ModeIdIndex, pVBInfo ) ;
+                    XGI_GetVGAType( HwDeviceExtension , pVBInfo) ;
+                    XGI_GetVBType( pVBInfo ) ;
+                    pVBInfo->SetFlag = 0x00 ;
+                    pVBInfo->ModeType = ModeVGA ;
+                    pVBInfo->VBInfo = SetCRT2ToRAMDAC | LoadDACFlag | SetInSlaveMode ;
+                    XGI_GetLCDInfo( 0x2e , ModeIdIndex, pVBInfo ) ;
+                    XGI_GetTVInfo(  0x2e , ModeIdIndex, pVBInfo ) ;
+                    XGI_EnableBridge( HwDeviceExtension, pVBInfo ) ;
+                    XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ;
+                    XGI_SetCRT2ModeRegs( 0x2e , HwDeviceExtension, pVBInfo ) ;
+                    /* XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ; */
+                    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ;	/* Display Off 0212 */
+                    for( i = 0 ; i < 20 ; i++ )
+                    {
+                        XGI_LongWait(pVBInfo) ;
+                    }
+                }
+                XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1c ) ;
+                tempax = 0 ;
+                tempbx = *pVBInfo->pRGBSenseData ;
+
+                if ( !( XGINew_Is301B( pVBInfo ) ) )
+                {
+                    tempbx = *pVBInfo->pRGBSenseData2 ;
+                }
+
+                tempcx = 0x0E08 ;
+                if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                {
+                    if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                    {
+                        tempax |= Monitor2Sense ;
+                    }
+                }
+
+                if ( pVBInfo->VBType & VB_XGI301C)
+                {
+                    XGINew_SetRegOR( pVBInfo->Part4Port , 0x0d , 0x04 ) ;
+                }
+
+		if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) )		/* add by kuku for Multi-adapter sense HiTV */
+		{
+		    tempax |= HiTVSense ;
+                    if ( ( pVBInfo->VBType & VB_XGI301C ) )
+                    {
+                	tempax ^= ( HiTVSense | YPbPrSense ) ;
+                    }
+                }
+
+		if ( !( tempax & ( HiTVSense | YPbPrSense ) ) )		/* start */
+                {
+
+                    tempbx = *pVBInfo->pYCSenseData ;
+
+                    if ( !( XGINew_Is301B(  pVBInfo ) ) )
+                    {
+                      tempbx=*pVBInfo->pYCSenseData2;
+                    }
+
+                    tempcx = 0x0604 ;
+                    if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                    {
+                      if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                      {
+                          tempax |= SVIDEOSense ;
+                      }
+                    }
+
+                    if ( OutputSelect & BoardTVType )
+                    {
+                      tempbx = *pVBInfo->pVideoSenseData ;
+
+                      if ( !( XGINew_Is301B( pVBInfo ) ) )
+                      {
+                          tempbx = *pVBInfo->pVideoSenseData2 ;
+                      }
+
+                      tempcx = 0x0804 ;
+                      if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                      {
+                          if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                          {
+                              tempax |= AVIDEOSense ;
+                          }
+                      }
+                    }
+                    else
+                    {
+                      if ( !( tempax & SVIDEOSense ) )
+                      {
+                        tempbx = *pVBInfo->pVideoSenseData ;
+
+                        if ( !( XGINew_Is301B( pVBInfo ) ) )
+                        {
+                            tempbx=*pVBInfo->pVideoSenseData2;
+                        }
+
+                        tempcx = 0x0804 ;
+                        if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                        {
+                            if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                            {
+                                tempax |= AVIDEOSense ;
+                            }
+                        }
+                      }
+                    }
+                }
+    	    } /* end */
+            if ( !( tempax & Monitor2Sense ) )
+            {
+                if ( XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) )
+                {
+                    tempax |= LCDSense ;
+                }
+            }
+            tempbx = 0 ;
+            tempcx = 0 ;
+            XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0xDF , tempax ) ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , P2reg0 ) ;
+
+            if ( !( P2reg0 & 0x20 ) )
+            {
+                pVBInfo->VBInfo = DisableCRT2Display ;
+                /* XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ; */
+            }
+        }
+    }
+    XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ;		/* shampoo 0226 */
+
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SenseLCD( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    /* USHORT SoftSetting ; */
+    USHORT temp ;
+
+    if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+        temp = 0 ;
+    else
+        temp=XGINew_GetPanelID(pVBInfo) ;
+
+    if( !temp )
+        temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+
+    return( temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ;
+
+    /* add lcd sense */
+    if ( HwDeviceExtension->ulCRT2LCDType == LCD_UNKNOWN )
+    {
+        return( 0 ) ;
+    }
+    else
+    {
+        temp = ( USHORT )HwDeviceExtension->ulCRT2LCDType ;
+        switch( HwDeviceExtension->ulCRT2LCDType )
+        {
+            case LCD_INVALID:
+            case LCD_800x600:
+            case LCD_1024x768:
+            case LCD_1280x1024:
+                break ;
+
+            case LCD_640x480:
+            case LCD_1024x600:
+            case LCD_1152x864:
+            case LCD_1280x960:
+            case LCD_1152x768:
+                temp = 0 ;
+                break ;
+
+            case LCD_1400x1050:
+            case LCD_1280x768:
+            case LCD_1600x1200:
+                break ;
+
+            case LCD_1920x1440:
+            case LCD_2048x1536:
+                temp = 0 ;
+                break ;
+
+            default:
+                break ;
+        }
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , 0xF0 , temp ) ;
+        return( 1 ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT PanelTypeTable[ 16 ] = { SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType00 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType01 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType02 ,
+                                    SyncNN | PanelRGB18Bit | Panel640x480  | _PanelType03 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType04 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType05 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType06 ,
+                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType07 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType08 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType09 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType0A ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0B ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0C ,
+                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType0D ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0E ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0F } ;
+    USHORT tempax , tempbx , temp ;
+    /* USHORT return_flag ; */
+
+    tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;
+    tempbx = tempax & 0x1E ;
+
+    if ( tempax == 0 )
+        return( 0 ) ;
+    else
+    {
+/*
+        if ( !( tempax & 0x10 ) )
+        {
+            if ( pVBInfo->IF_DEF_LVDS == 1 )
+            {
+                tempbx = 0 ;
+                temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+                if ( temp & 0x40 )
+                    tempbx |= 0x08 ;
+                if ( temp & 0x20 )
+                    tempbx |= 0x02 ;
+                if ( temp & 0x01 )
+                    tempbx |= 0x01 ;
+
+                temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+                if ( temp & 0x80 )
+                    tempbx |= 0x04 ;
+            }
+            else
+            {
+                return( 0 ) ;
+            }
+        }
+*/
+
+        tempbx = tempbx >> 1 ;
+        temp = tempbx & 0x00F ;
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x36 , temp ) ;
+        tempbx-- ;
+        tempbx = PanelTypeTable[ tempbx ] ;
+
+        temp = ( tempbx & 0xFF00 ) >> 8 ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~( LCDSyncBit | LCDRGB18Bit ) , temp ) ;
+        return( 1 ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_BridgeIsEnable */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_BridgeIsEnable( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT flag ;
+
+    if ( XGI_BridgeIsOn( pVBInfo ) == 0 )
+    {
+        flag = XGINew_GetReg1( pVBInfo->Part1Port , 0x0 ) ;
+
+        if ( flag & 0x050 )
+        {
+            return( 1 ) ;
+        }
+        else
+        {
+            return( 0 ) ;
+        }
+
+    }
+    return( 0 ) ;
+}
+
+/* ------------------------------------------------------ */
+/* Function : XGINew_SenseHiTV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* ------------------------------------------------------ */
+BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx , tempcx , temp , i , tempch;
+
+    tempbx = *pVBInfo->pYCSenseData2 ;
+
+    tempcx = 0x0604 ;
+
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait(pVBInfo) ;
+
+    tempch = ( tempcx & 0xFF00 ) >> 8;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp !=  tempch )
+        return( 0 ) ;
+
+    tempbx = *pVBInfo->pVideoSenseData2 ;
+
+    tempcx = 0x0804 ;
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait(pVBInfo) ;
+
+    tempch = ( tempcx & 0xFF00 ) >> 8;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp !=  tempch )
+        return( 0 ) ;
+    else
+    {
+      tempbx = 0x3FF ;
+      tempcx = 0x0804 ;
+      temp = tempbx & 0xFF ;
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+      temp = ( tempbx & 0xFF00 ) >> 8 ;
+      temp |= ( tempcx & 0x00FF ) ;
+      XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+      for( i = 0 ; i < 10 ; i++ )
+          XGI_LongWait(pVBInfo) ;
+
+      tempch = ( tempcx & 0xFF00 ) >> 8;
+      temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+      temp = temp ^ ( 0x0E ) ;
+      temp &= tempch ;
+
+      if ( temp != tempch )
+          return( 1 ) ;
+      else
+	  return( 0 ) ;
+    }
+}
+
+
+
+/*
+;-----------------------------------------------------------------------------
+;       Description: Get Panel support
+;	O/P	   :
+;            BL: Panel ID=81h for no scaler LVDS
+;		     BH: Panel enhanced Mode Count
+;		     CX: Panel H. resolution
+;		     DX: PAnel V. resolution
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+    USHORT ModeIdIndex;
+    USHORT ModeNo;
+
+    USHORT EModeCount;
+    USHORT lvdstableindex;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    pBiosArguments->h.bl = 0x81;
+    pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE;
+    pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE;
+    EModeCount = 0;
+
+    pBiosArguments->x.ax = 0x0014;
+    for( ModeIdIndex = 0 ; ;  ModeIdIndex ++ )
+    {
+        ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+        if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+        {
+            pBiosArguments->h.bh = (UCHAR) EModeCount;
+            return;
+        }
+        if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+        {
+          continue;
+        }
+        EModeCount++ ;
+    }
+}
+/*(
+;-----------------------------------------------------------------------------
+;
+;       Description: Get Panel mode ID for enhanced mode
+;	I/P	   : BH: EModeIndex ( which < Panel enhanced Mode Count )
+;	O/P	   :
+;            BL: Mode ID
+;		     CX: H. resolution of the assigned by the index
+;		     DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+    USHORT EModeCount;
+    USHORT ModeIdIndex,resindex;
+    USHORT ModeNo;
+    USHORT EModeIndex = pBiosArguments->h.bh;
+
+    EModeCount = 0;
+    for( ModeIdIndex = 0 ; ;  ModeIdIndex ++ )
+    {
+        ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+        if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+        {
+            pBiosArguments->x.ax = 0x0114;
+            return;
+        }
+        if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+        {
+          continue;
+        }
+        if (EModeCount == EModeIndex)
+        {
+            resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+            pBiosArguments->h.bl = (UCHAR) ModeNo;
+            pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+            pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+            pBiosArguments->x.ax = 0x0014;
+        }
+        EModeCount++ ;
+
+    }
+
+}
+/*
+;-----------------------------------------------------------------------------
+;
+;       Description: Validate Panel modes ID support
+;	I/P	   :
+;            BL: ModeID
+;	O/P	   :
+;		     CX: H. resolution of the assigned by the index
+;		     DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub72( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+    USHORT ModeIdIndex,resindex;
+    USHORT ModeNo;
+
+
+    ModeNo = pBiosArguments->h.bl ;
+    XGI_SearchModeID( ModeNo, &ModeIdIndex, pVBInfo);
+    if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+    {
+        pBiosArguments->x.cx = 0;
+        pBiosArguments->x.dx = 0;
+        pBiosArguments->x.ax = 0x0114;
+        return;
+    }
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        pBiosArguments->x.cx = pVBInfo->StResInfo[ resindex ].HTotal ;
+        pBiosArguments->x.dx = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+    }
+
+    pBiosArguments->x.ax = 0x0014;
+
+}
+
+/*
+;-----------------------------------------------------------------------------
+;	Description: Get Customized Panel misc. information support
+;	I/P	   : Select
+;		     to get panel horizontal timing
+;			 to get panel vertical timing
+;			 to get channel clock parameter
+;            to get panel misc information
+;
+;	O/P	   :
+;		     BL: for input Select = 0 ;
+;                       BX: *Value1 = Horizontal total
+;                       CX: *Value2 = Horizontal front porch
+;                       DX: *Value2 = Horizontal sync width
+;		     BL: for input Select = 1 ;
+;                       BX: *Value1 = Vertical total
+;                       CX: *Value2 = Vertical front porch
+;                       DX: *Value2 = Vertical sync width
+;            BL: for input Select = 2 ;
+;                       BX: Value1 = The first CLK parameter
+;                       CX: Value2 = The second CLK parameter
+;		     BL: for input Select = 4 ;
+;                       BX[15]: *Value1 D[15] VESA V. Polarity
+;                       BX[14]: *Value1 D[14] VESA H. Polarity
+;                       BX[7]: *Value1 D[7] Panel V. Polarity
+;                       BX[6]: *Value1 D[6] Panel H. Polarity
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub73( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+    UCHAR Select;
+
+    USHORT lvdstableindex;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    Select = pBiosArguments->h.bl;
+
+    switch (Select)
+    {
+        case 0:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP;
+                pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC;
+                break;
+        case 1:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP;
+                pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC;
+                break;
+        case 2:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2;
+                break;
+        case 4:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability;
+                break;
+    }
+
+    pBiosArguments->x.ax = 0x0014;
+}
+
+
+void XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments)
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_HiVision = 1 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_YPbPr = 1 ;
+    pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+    InitTo330Pointer( pXGIHWDE->jChipType,  pVBInfo ) ;
+    ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    switch(pBiosArguments->x.ax)
+    {
+    case 0x1470:
+         XGI_XG21Fun14Sub70( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1471:
+         XGI_XG21Fun14Sub71( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1472:
+         XGI_XG21Fun14Sub72( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1473:
+         XGI_XG21Fun14Sub73( pVBInfo , pBiosArguments ) ;
+         break;
+    }
+}
diff --git a/drivers/staging/xgifb/vb_ext.h b/drivers/staging/xgifb/vb_ext.h
new file mode 100644
index 00000000000..9a72f5ecb71
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.h
@@ -0,0 +1,32 @@
+#ifndef  _VBEXT_
+#define  _VBEXT_
+
+struct DWORDREGS {
+    ULONG    Eax, Ebx, Ecx, Edx, Esi, Edi, Ebp;
+};
+
+struct WORDREGS {
+    USHORT    ax, hi_ax, bx, hi_bx, cx, hi_cx, dx, hi_dx, si, hi_si, di ,hi_di, bp, hi_bp;
+};
+
+struct BYTEREGS {
+    UCHAR   al, ah, hi_al, hi_ah, bl, bh, hi_bl, hi_bh, cl, ch, hi_cl, hi_ch, dl, dh, hi_dl, hi_dh;
+};
+
+typedef union   _X86_REGS    {
+    struct  DWORDREGS e;
+    struct  WORDREGS x;
+    struct  BYTEREGS h;
+} X86_REGS, *PX86_REGS;
+
+extern   void     XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments);
+extern   void     XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+extern   void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+extern   void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+extern   USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+extern   BOOLEAN  XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus );
+#endif /* WIN2000 */
+
+#endif
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
new file mode 100644
index 00000000000..b85ca9ba807
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.c
@@ -0,0 +1,3444 @@
+#include "osdef.h"
+#include "vgatypes.h"
+
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/delay.h> /* udelay */
+#include "XGIfb.h"
+/*#if LINUX_VERSxION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif */
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_init.h"
+#include "vb_ext.h"
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+
+
+
+UCHAR    XGINew_ChannelAB,XGINew_DataBusWidth;
+
+USHORT XGINew_DRAMType[17][5]={{0x0C,0x0A,0x02,0x40,0x39},{0x0D,0x0A,0x01,0x40,0x48},
+                     {0x0C,0x09,0x02,0x20,0x35},{0x0D,0x09,0x01,0x20,0x44},
+                     {0x0C,0x08,0x02,0x10,0x31},{0x0D,0x08,0x01,0x10,0x40},
+                     {0x0C,0x0A,0x01,0x20,0x34},{0x0C,0x09,0x01,0x08,0x32},
+                     {0x0B,0x08,0x02,0x08,0x21},{0x0C,0x08,0x01,0x08,0x30},
+                     {0x0A,0x08,0x02,0x04,0x11},{0x0B,0x0A,0x01,0x10,0x28},
+                     {0x09,0x08,0x02,0x02,0x01},{0x0B,0x09,0x01,0x08,0x24},
+                     {0x0B,0x08,0x01,0x04,0x20},{0x0A,0x08,0x01,0x02,0x10},
+                     {0x09,0x08,0x01,0x01,0x00}};
+
+USHORT XGINew_SDRDRAM_TYPE[13][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 1,13, 9,64,0x44},
+{ 2,12, 8,32,0x31},
+{ 2,11, 9,32,0x25},
+{ 1,12, 9,32,0x34},
+{ 1,13, 8,32,0x40},
+{ 2,11, 8,16,0x21},
+{ 1,12, 8,16,0x30},
+{ 1,11, 9,16,0x24},
+{ 1,11, 8, 8,0x20},
+{ 2, 9, 8, 4,0x01},
+{ 1,10, 8, 4,0x10},
+{ 1, 9, 8, 2,0x00}
+};
+
+USHORT XGINew_DDRDRAM_TYPE[4][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 2,12, 8,32,0x31},
+{ 2,11, 8,16,0x21},
+{ 2, 9, 8, 4,0x01}
+};
+USHORT XGINew_DDRDRAM_TYPE340[4][5]=
+{
+{ 2,13, 9,64,0x45},
+{ 2,12, 9,32,0x35},
+{ 2,12, 8,16,0x31},
+{ 2,11, 8, 8,0x21}
+};
+USHORT XGINew_DDRDRAM_TYPE20[12][5]=
+{
+{ 2,14,11,128,0x5D},
+{ 2,14,10,64,0x59},
+{ 2,13,11,64,0x4D},
+{ 2,14, 9,32,0x55},
+{ 2,13,10,32,0x49},
+{ 2,12,11,32,0x3D},
+{ 2,14, 8,16,0x51},
+{ 2,13, 9,16,0x45},
+{ 2,12,10,16,0x39},
+{ 2,13, 8, 8,0x41},
+{ 2,12, 9, 8,0x35},
+{ 2,12, 8, 4,0x31}
+};
+
+void     XGINew_SetDRAMSize_340(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void     XGINew_SetDRAMSize_310(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void     XGINew_SetMemoryClock(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+void     XGINew_SetDRAMModeRegister(PVB_DEVICE_INFO );
+void     XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void 	 XGINew_SetDRAMDefaultRegister340(PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG, PVB_DEVICE_INFO );
+UCHAR    XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension) ;
+
+int      XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+void     XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO ,PVB_DEVICE_INFO) ;
+void     XGINew_CheckBusWidth_310( PVB_DEVICE_INFO) ;
+int      XGINew_SDRSizing(PVB_DEVICE_INFO);
+int      XGINew_DDRSizing( PVB_DEVICE_INFO );
+void     XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+int      XGINew_RAMType;                  /*int      ModeIDOffset,StandTable,CRT1Table,ScreenOffset,REFIndex;*/
+ULONG	 UNIROM;			  /* UNIROM */
+BOOLEAN  ChkLFB( PVB_DEVICE_INFO );
+void     XGINew_Delay15us(ULONG);
+void     SetPowerConsume (PXGI_HW_DEVICE_INFO HwDeviceExtension,ULONG XGI_P3d4Port);
+void 	 ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+void 	 XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo);
+void     XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void     XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void 	 XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void     XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR    GetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void     XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR    GetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+
+#ifdef WIN2000
+/* [Billy] 2007/05/20 For CH7007 */
+extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+#endif
+
+#ifdef LINUX_KERNEL
+void DelayUS(ULONG MicroSeconds)
+{
+	udelay(MicroSeconds);
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+/* Function : XGIInitNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    UCHAR   i , temp = 0 , temp1 ;
+     //       VBIOSVersion[ 5 ] ;
+    PUCHAR  volatile pVideoMemory;
+
+    /* ULONG j, k ; */
+
+    PXGI_DSReg pSR ;
+
+    ULONG Temp ;
+
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+    pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr;
+
+
+//    Newdebugcode( 0x99 ) ;
+
+
+   /* if ( pVBInfo->ROMAddr == 0 ) */
+   /* return( FALSE ) ; */
+
+    if ( pVBInfo->FBAddr == 0 )
+{
+       printk("\n pVBInfo->FBAddr == 0 ");
+       return( FALSE ) ;
+}
+printk("1");
+    if ( pVBInfo->BaseAddr == 0 )
+{
+       printk("\npVBInfo->BaseAddr == 0 ");
+        return( FALSE ) ;
+}
+printk("2");
+
+    XGINew_SetReg3( ( pVBInfo->BaseAddr + 0x12 ) , 0x67 ) ;	/* 3c2 <- 67 ,ynlai */
+
+    pVBInfo->ISXPDOS = 0 ;
+printk("3");
+
+if ( !HwDeviceExtension->bIntegratedMMEnabled )
+{
+        return( FALSE ) ;	/* alan */
+}
+printk("4");
+
+//    XGI_MemoryCopy( VBIOSVersion , HwDeviceExtension->szVBIOSVer , 4 ) ;
+
+ //   VBIOSVersion[ 4 ] = 0x0 ;
+
+    /* 09/07/99 modify by domao */
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+printk("5");
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+    InitTo330Pointer( HwDeviceExtension->jChipType,  pVBInfo ) ;
+
+    /* ReadVBIOSData */
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    /* 1.Openkey */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+printk("6");
+
+    /* GetXG21Sense (GPIO) */
+    if ( HwDeviceExtension->jChipType == XG21 )
+    {
+    	XGINew_GetXG21Sense(HwDeviceExtension, pVBInfo) ;
+    }
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+    	XGINew_GetXG27Sense(HwDeviceExtension, pVBInfo) ;
+    }
+printk("7");
+
+    /* 2.Reset Extended register */
+
+    for( i = 0x06 ; i < 0x20 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+    for( i = 0x21 ; i <= 0x27 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+    /* for( i = 0x06 ; i <= 0x27 ; i++ ) */
+    /* XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ; */
+
+printk("8");
+
+    if(( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40))
+    {
+        for( i = 0x31 ; i <= 0x3B ; i++ )
+            XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+    }
+    else
+    {
+        for( i = 0x31 ; i <= 0x3D ; i++ )
+            XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+    }
+printk("9");
+
+    if ( HwDeviceExtension->jChipType == XG42 )			/* [Hsuan] 2004/08/20 Auto over driver for XG42 */
+      XGINew_SetReg1( pVBInfo->P3c4 , 0x3B , 0xC0 ) ;
+
+    /* for( i = 0x30 ; i <= 0x3F ; i++ ) */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ; */
+
+    for( i = 0x79 ; i <= 0x7C ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ;		/* shampoo 0208 */
+
+printk("10");
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ;
+
+    /* 3.SetMemoryClock
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+        XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) ;
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;  */
+
+printk("11");
+
+    /* 4.SetDefExt1Regs begin */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , *pVBInfo->pSR07 ) ;
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x40 , *pVBInfo->pSR40 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x41 , *pVBInfo->pSR41 ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , 0x0F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , *pVBInfo->pSR1F ) ;
+    /* XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ; */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0xA0 ) ;	/* alan, 2001/6/26 Frame buffer can read/write SR20 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , 0x70 ) ;	/* Hsuan, 2006/01/01 H/W request for slow corner chip */
+    if ( HwDeviceExtension->jChipType == XG27 )         /* Alan 12/07/2006 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , *pVBInfo->pSR36 ) ;
+
+    /* SR11 = 0x0F ; */
+    /* XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , SR11 ) ; */
+
+printk("12");
+
+   if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+//    /* Set AGP Rate */
+//    temp1 = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+//    temp1 &= 0x02 ;
+//    if ( temp1 == 0x02 )
+//    {
+//        XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+//       ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+//        XGINew_SetReg4( 0xcf8 , 0x8000002C ) ;
+//        VendorID = XGINew_GetReg3( 0x0cfc ) ;
+//        VendorID &= 0x0000FFFF ;
+//        XGINew_SetReg4( 0xcf8 , 0x8001002C ) ;
+//        GraphicVendorID = XGINew_GetReg3( 0x0cfc ) ;
+//        GraphicVendorID &= 0x0000FFFF;
+//
+//        if ( ChipsetID == 0x7301039 )
+///            XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x09 ) ;
+//
+//        ChipsetID &= 0x0000FFFF ;
+///
+//        if ( ( ChipsetID == 0x700E ) || ( ChipsetID == 0x1022 ) || ( ChipsetID == 0x1106 ) || ( ChipsetID == 0x10DE ) )
+//        {
+//            if ( ChipsetID == 0x1106 )
+//            {
+//                if ( ( VendorID == 0x1019 ) && ( GraphicVendorID == 0x1019 ) )
+//                    XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0D ) ;
+//                else
+//                    XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+//            }
+//            else
+//                XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+//        }
+//    }
+
+printk("13");
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        /* Set AGP customize registers (in SetDefAGPRegs) Start */
+        for( i = 0x47 ; i <= 0x4C ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ i - 0x47 ] ) ;
+
+        for( i = 0x70 ; i <= 0x71 ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 6 + i - 0x70 ] ) ;
+
+        for( i = 0x74 ; i <= 0x77 ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 8 + i - 0x74 ] ) ;
+        /* Set AGP customize registers (in SetDefAGPRegs) End */
+        /*[Hsuan]2004/12/14 AGP Input Delay Adjustment on 850 */
+//        XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+//        ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+//        if ( ChipsetID == 0x25308086 )
+//            XGINew_SetReg1( pVBInfo->P3d4 , 0x77 , 0xF0 ) ;
+
+        HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x50 , 0 , &Temp ) ;	/* Get */
+        Temp >>= 20 ;
+        Temp &= 0xF ;
+
+        if ( Temp == 1 )
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , 0x20 ) ;	/* CR48 */
+    }
+printk("14");
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x49 , pVBInfo->CR49[ 0 ] ) ;
+    }	/* != XG20 */
+
+    /* Set PCI */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x23 , *pVBInfo->pSR23 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x24 , *pVBInfo->pSR24 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x25 , pVBInfo->SR25[ 0 ] ) ;
+printk("15");
+
+    if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+    /* Set VB */
+    XGI_UnLockCRT2( HwDeviceExtension, pVBInfo) ;
+    XGINew_SetRegANDOR( pVBInfo->Part0Port , 0x3F , 0xEF , 0x00 ) ;	/* alan, disable VideoCapture */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , 0x00 ) ;
+    temp1 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x7B ) ;		/* chk if BCLK>=100MHz */
+    temp = ( UCHAR )( ( temp1 >> 4 ) & 0x0F ) ;
+
+
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , ( *pVBInfo->pCRT2Data_1_2 ) ) ;
+
+printk("16");
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x2E , 0x08 ) ;	/* use VB */
+    } /* != XG20 */
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x27 , 0x1F ) ;
+
+    if ( ( HwDeviceExtension->jChipType == XG42 ) && XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) != 0 )	/* Not DDR */
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , ( *pVBInfo->pSR31 & 0x3F ) | 0x40 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( *pVBInfo->pSR32 & 0xFC ) | 0x01 ) ;
+    }
+    else
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , *pVBInfo->pSR31 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , *pVBInfo->pSR32 ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x33 , *pVBInfo->pSR33 ) ;
+printk("17");
+
+/*
+    if ( HwDeviceExtension->jChipType >= XG40 )
+      SetPowerConsume ( HwDeviceExtension , pVBInfo->P3c4);	*/
+
+    if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+    if ( XGI_BridgeIsOn( pVBInfo ) == 1 )
+    {
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1C ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , *pVBInfo->pCRT2Data_4_D ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0E , *pVBInfo->pCRT2Data_4_E ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , *pVBInfo->pCRT2Data_4_10 ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+        }
+
+        XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+    }
+    }	/* != XG20 */
+printk("18");
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x83 , 0x00 ) ;
+printk("181");
+
+    if ( HwDeviceExtension->bSkipSense == FALSE )
+    {
+printk("182");
+
+        XGI_SenseCRT1(pVBInfo) ;
+
+printk("183");
+        /* XGINew_DetectMonitor( HwDeviceExtension ) ; */
+pVBInfo->IF_DEF_CH7007 = 0;
+        if ( ( HwDeviceExtension->jChipType == XG21 ) && (pVBInfo->IF_DEF_CH7007) )
+        {
+printk("184");
+           XGI_GetSenseStatus( HwDeviceExtension , pVBInfo ) ; 	/* sense CRT2 */
+printk("185");
+
+        }
+        if ( HwDeviceExtension->jChipType == XG21 )
+        {
+printk("186");
+
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ;	/* Z9 default has CRT */
+       	  temp = GetXG21FPBits( pVBInfo ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x01, temp ) ;
+printk("187");
+
+          }
+        if ( HwDeviceExtension->jChipType == XG27 )
+        {
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ;	/* Z9 default has CRT */
+       	  temp = GetXG27FPBits( pVBInfo ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x03, temp ) ;
+        }
+    }
+printk("19");
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        if ( HwDeviceExtension->jChipType >= XG40 )
+        {
+          XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+         }
+
+        XGINew_SetDRAMDefaultRegister340( HwDeviceExtension ,  pVBInfo->P3d4,  pVBInfo ) ;
+
+        if ( HwDeviceExtension->bSkipDramSizing == TRUE )
+        {
+            pSR = HwDeviceExtension->pSR ;
+            if ( pSR!=NULL )
+            {
+                while( pSR->jIdx != 0xFF )
+                {
+                    XGINew_SetReg1( pVBInfo->P3c4 , pSR->jIdx , pSR->jVal ) ;
+                    pSR++ ;
+                }
+            }
+            /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+        }   	/* SkipDramSizing */
+        else
+        {
+#if 0
+           if ( HwDeviceExtension->jChipType == XG20 )
+            {
+            	XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , pVBInfo->SR15[0][XGINew_RAMType] ) ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , pVBInfo->SR15[1][XGINew_RAMType] ) ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ;
+            }
+            else
+#endif
+{
+printk("20");
+
+               XGINew_SetDRAMSize_340( HwDeviceExtension , pVBInfo) ;
+}
+printk("21");
+
+        }
+    }		/* XG40 */
+
+printk("22");
+
+
+    /* SetDefExt2Regs begin */
+/*
+    AGP = 1 ;
+    temp =( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+    temp &= 0x30 ;
+    if ( temp == 0x30 )
+        AGP = 0 ;
+
+    if ( AGP == 0 )
+        *pVBInfo->pSR21 &= 0xEF ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+    if ( AGP == 1 )
+        *pVBInfo->pSR22 &= 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+*/
+
+//    base = 0x80000000 ;
+//    OutPortLong( 0xcf8 , base ) ;
+//    Temp = ( InPortLong( 0xcfc ) & 0xFFFF ) ;
+//    if ( Temp == 0x1039 )
+//    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , ( UCHAR )( ( *pVBInfo->pSR22 ) & 0xFE ) ) ;
+//    }
+//    else
+//    {
+//        XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+//    }
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+
+printk("23");
+
+
+    XGINew_ChkSenseStatus ( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetModeScratch ( HwDeviceExtension , pVBInfo ) ;
+
+printk("24");
+
+
+XGINew_SetReg1( pVBInfo->P3d4 , 0x8c , 0x87);
+XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31);
+printk("25");
+
+    return( TRUE ) ;
+} /* end of init */
+
+
+
+
+
+/* ============== alan ====================== */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetXG20DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data, temp ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )
+    {
+        if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        {
+            data = *pVBInfo->pSoftSetting & 0x07 ;
+            return( data ) ;
+        }
+        else
+        {
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ;
+
+            if ( data == 0 )
+                data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) & 0x02 ) >> 1 ;
+
+            return( data ) ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        {
+            data = *pVBInfo->pSoftSetting & 0x07 ;
+            return( data ) ;
+        }
+        temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+
+     	if (( temp & 0x88 )==0x80)		/* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */
+       	  data = 0 ;					/*DDR*/
+        else
+       	  data = 1 ; 					/*DDRII*/
+       	return( data ) ;
+    }
+    else if ( HwDeviceExtension->jChipType == XG21 )
+    {
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0xB4 , ~0x02 ) ;     		/* Independent GPIO control */
+     	DelayUS(800);
+        XGINew_SetRegOR( pVBInfo->P3d4 , 0x4A , 0x80 ) ;		/* Enable GPIOH read */
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;       		/* GPIOF 0:DVI 1:DVO */
+// HOTPLUG_SUPPORT
+// for current XG20 & XG21, GPIOH is floating, driver will fix DDR temporarily
+     	if ( temp & 0x01 )						/* DVI read GPIOH */
+       	  data = 1 ;							/*DDRII*/
+        else
+       	  data = 0 ; 							/*DDR*/
+//~HOTPLUG_SUPPORT
+       	XGINew_SetRegOR( pVBInfo->P3d4 , 0xB4 , 0x02 ) ;
+       	return( data ) ;
+    }
+    else
+    {
+    	data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) & 0x01 ;
+
+    	if ( data == 1 )
+            data ++ ;
+
+    	return( data );
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Get310DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_Get310DRAMType(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data ;
+
+  /* index = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ; */
+  /* index &= 07 ; */
+
+    if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        data = *pVBInfo->pSoftSetting & 0x03 ;
+    else
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3a ) & 0x03 ;
+
+    return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Delay15us */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*
+void XGINew_Delay15us(ULONG ulMicrsoSec)
+{
+}
+*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SDR_MRS(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+    data &= 0x3F ;          /* SR16 D7=0,D6=0 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;   /* enable mode register set(MRS) low */
+    /* XGINew_Delay15us( 0x100 ) ; */
+    data |= 0x80 ;          /* SR16 D7=1,D6=0 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;   /* enable mode register set(MRS) high */
+    /* XGINew_Delay15us( 0x100 ) ; */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    if ( *pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C )	/* Samsung F Die */
+    {
+        DelayUS( 3000 ) ;	/* Delay 67 x 3 Delay15us */
+        XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+        XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+        XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+        XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    }
+
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 0 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 1 ] ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 2 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 3 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRII_Bootup_XG27 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDRII_Bootup_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+    XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+   /* Set Double Frequency */
+    /* XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ; */		/* CR97 */
+    XGINew_SetReg1( P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ;    /* CR97 */
+
+    DelayUS( 200 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS2
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS3
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS1
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;   /* Set SR18 */ //MRS, DLL Enable
+    XGINew_SetReg1( P3c4 , 0x19 , 0x0A ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;   /* Set SR16 */
+    /* DelayUS( 15 ) ; */
+
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;   /* Set SR1B */
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;   /* Set SR1B */
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;   /* Set SR18 */ //MRS, DLL Reset
+    XGINew_SetReg1( P3c4 , 0x19 , 0x08 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x80 ) ;   /* Set SR18 */ //MRS, ODT
+    XGINew_SetReg1( P3c4 , 0x19 , 0x46 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;   /* Set SR1B refresh control 000:close; 010:open */
+    DelayUS( 200 ) ;
+
+
+}
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+
+    XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;			/* CR97 */
+
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS2 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS3 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+   // XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x02 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;			/* SR1B */
+    DelayUS( 100 ) ;
+
+    //XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ;			/* MRS2 */
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    DelayUS( 200 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+
+     XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+     XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;			/* CR97 */
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS2 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x10 ) ;
+    DelayUS( 15 ) ;                          ////06/11/23 XG27 A0 for CKE enable
+    XGINew_SetReg1( P3c4 , 0x16 , 0x90 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS3 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/22 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/22 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x06 ) ;   ////[Billy]06/11/22 DLL Reset for XG27 Hynix DRAM
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/23 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    DelayUS( 30 ) ;                          ////06/11/23 XG27 A0 Start Auto-PreCharge
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;			/* SR1B */
+
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x04 ) ;   //// DLL without Reset for XG27 Hynix DRAM
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x80 );     ////XG27 OCD ON
+    XGINew_SetReg1( P3c4 , 0x19 , 0x46 );
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 );
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 );
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    DelayUS( 15 ) ;                         ////Start Auto-PreCharge
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;			/* SR1B */
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+        XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+        XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+        XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+
+        XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+        XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+        XGINew_DDR1x_MRS_XG20( P3c4 , pVBInfo) ;
+    }
+    else
+    {
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+        switch( HwDeviceExtension->jChipType )
+        {
+            case XG41:
+            case XG42:
+                XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+                XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+                XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+                break ;
+            default:
+                XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+                XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+                XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+                XGINew_GetReg1( P3d4 , 0x86 ) ;
+                XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;
+                XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+                XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+                XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+                XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+                XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+                break ;
+        }
+
+        XGINew_SetReg1( P3d4 , 0x97 , 0x00 ) ;
+        XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+        XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+        XGINew_DDR1x_MRS_340( P3c4 , pVBInfo ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port ,PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    /* 20040906 Hsuan modify CR82, CR85, CR86 for XG42 */
+    switch( HwDeviceExtension->jChipType )
+    {
+       case XG41:
+       case XG42:
+            XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+            XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+            XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+            break ;
+       default:
+         /* keep following setting sequence, each setting in the same reg insert idle */
+         XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+    	 XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+    }
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;
+    if ( HwDeviceExtension->jChipType == XG42 )
+    {
+      XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+    }
+    else
+    {
+      XGINew_SetReg1( P3d4 , 0x98 , 0x03 ) ;
+    }
+    XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+    XGINew_DDR2x_MRS_340( P3c4 , pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    /* keep following setting sequence, each setting in the same reg insert idle */
+    XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+    XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+    XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+    XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+    XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+    XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+    if ( HwDeviceExtension->jChipType == XG27 )
+      XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+    else
+    XGINew_SetReg1( P3d4 , 0x82 , 0xA8 ) ;	/* CR82 */
+
+    XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+    XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+    if ( HwDeviceExtension->jChipType == XG27 )
+       XGINew_DDRII_Bootup_XG27( HwDeviceExtension ,  P3c4 , pVBInfo) ;
+    else
+    XGINew_DDR2_MRS_XG20( HwDeviceExtension , P3c4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMDefaultRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMDefaultRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp , temp1 , temp2 , temp3 ,
+          i , j , k ;
+
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    XGINew_SetReg1( P3d4 , 0x6D , pVBInfo->CR40[ 8 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x68 , pVBInfo->CR40[ 5 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x69 , pVBInfo->CR40[ 6 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x6A , pVBInfo->CR40[ 7 ][ XGINew_RAMType ] ) ;
+
+    temp2 = 0 ;
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        temp = pVBInfo->CR6B[ XGINew_RAMType ][ i ] ;        		/* CR6B DQS fine tune delay */
+        for( j = 0 ; j < 4 ; j++ )
+        {
+            temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+            temp2 |= temp1 ;
+            XGINew_SetReg1( P3d4 , 0x6B , temp2 ) ;
+            XGINew_GetReg1( P3d4 , 0x6B ) ;				/* Insert read command for delay */
+            temp2 &= 0xF0 ;
+            temp2 += 0x10 ;
+        }
+    }
+
+    temp2 = 0 ;
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        temp = pVBInfo->CR6E[ XGINew_RAMType ][ i ] ;        		/* CR6E DQM fine tune delay */
+        for( j = 0 ; j < 4 ; j++ )
+        {
+            temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+            temp2 |= temp1 ;
+            XGINew_SetReg1( P3d4 , 0x6E , temp2 ) ;
+            XGINew_GetReg1( P3d4 , 0x6E ) ;				/* Insert read command for delay */
+            temp2 &= 0xF0 ;
+            temp2 += 0x10 ;
+        }
+    }
+
+    temp3 = 0 ;
+    for( k = 0 ; k < 4 ; k++ )
+    {
+        XGINew_SetRegANDOR( P3d4 , 0x6E , 0xFC , temp3 ) ;		/* CR6E_D[1:0] select channel */
+        temp2 = 0 ;
+        for( i = 0 ; i < 8 ; i++ )
+        {
+            temp = pVBInfo->CR6F[ XGINew_RAMType ][ 8 * k + i ] ;   	/* CR6F DQ fine tune delay */
+            for( j = 0 ; j < 4 ; j++ )
+            {
+                temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+                temp2 |= temp1 ;
+                XGINew_SetReg1( P3d4 , 0x6F , temp2 ) ;
+                XGINew_GetReg1( P3d4 , 0x6F ) ;				/* Insert read command for delay */
+                temp2 &= 0xF8 ;
+                temp2 += 0x08 ;
+            }
+        }
+        temp3 += 0x01 ;
+    }
+
+    XGINew_SetReg1( P3d4 , 0x80 , pVBInfo->CR40[ 9 ][ XGINew_RAMType ] ) ;	/* CR80 */
+    XGINew_SetReg1( P3d4 , 0x81 , pVBInfo->CR40[ 10 ][ XGINew_RAMType ] ) ;	/* CR81 */
+
+    temp2 = 0x80 ;
+    temp = pVBInfo->CR89[ XGINew_RAMType ][ 0 ] ;        		/* CR89 terminator type select */
+    for( j = 0 ; j < 4 ; j++ )
+    {
+        temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+        temp2 |= temp1 ;
+        XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+        XGINew_GetReg1( P3d4 , 0x89 ) ;				/* Insert read command for delay */
+        temp2 &= 0xF0 ;
+        temp2 += 0x10 ;
+    }
+
+    temp = pVBInfo->CR89[ XGINew_RAMType ][ 1 ] ;
+    temp1 = temp & 0x03 ;
+    temp2 |= temp1 ;
+    XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+
+    temp = pVBInfo->CR40[ 3 ][ XGINew_RAMType ] ;
+    temp1 = temp & 0x0F ;
+    temp2 = ( temp >> 4 ) & 0x07 ;
+    temp3 = temp & 0x80 ;
+    XGINew_SetReg1( P3d4 , 0x45 , temp1 ) ;	/* CR45 */
+    XGINew_SetReg1( P3d4 , 0x99 , temp2 ) ;	/* CR99 */
+    XGINew_SetRegOR( P3d4 , 0x40 , temp3 ) ;	/* CR40_D[7] */
+    XGINew_SetReg1( P3d4 , 0x41 , pVBInfo->CR40[ 0 ][ XGINew_RAMType ] ) ;	/* CR41 */
+
+    if ( HwDeviceExtension->jChipType == XG27 )
+      XGINew_SetReg1( P3d4 , 0x8F , *pVBInfo->pCR8F ) ;	/* CR8F */
+
+    for( j = 0 ; j <= 6 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0x90 + j ) , pVBInfo->CR40[ 14 + j ][ XGINew_RAMType ] ) ;	/* CR90 - CR96 */
+
+    for( j = 0 ; j <= 2 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0xC3 + j ) , pVBInfo->CR40[ 21 + j ][ XGINew_RAMType ] ) ;	/* CRC3 - CRC5 */
+
+    for( j = 0 ; j < 2 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0x8A + j ) , pVBInfo->CR40[ 1 + j ][ XGINew_RAMType ] ) ;	/* CR8A - CR8B */
+
+    if ( ( HwDeviceExtension->jChipType == XG41 ) || ( HwDeviceExtension->jChipType == XG42 ) )
+        XGINew_SetReg1( P3d4 , 0x8C , 0x87 ) ;
+
+    XGINew_SetReg1( P3d4 , 0x59 , pVBInfo->CR40[ 4 ][ XGINew_RAMType ] ) ;	/* CR59 */
+
+    XGINew_SetReg1( P3d4 , 0x83 , 0x09 ) ;	/* CR83 */
+    XGINew_SetReg1( P3d4 , 0x87 , 0x00 ) ;	/* CR87 */
+    XGINew_SetReg1( P3d4 , 0xCF , *pVBInfo->pCRCF ) ;	/* CRCF */
+    if ( XGINew_RAMType )
+    {
+      //XGINew_SetReg1( P3c4 , 0x17 , 0xC0 ) ;		/* SR17 DDRII */
+      XGINew_SetReg1( P3c4 , 0x17 , 0x80 ) ;		/* SR17 DDRII */
+      if ( HwDeviceExtension->jChipType == XG27 )
+        XGINew_SetReg1( P3c4 , 0x17 , 0x02 ) ;		/* SR17 DDRII */
+
+    }
+    else
+      XGINew_SetReg1( P3c4 , 0x17 , 0x00 ) ;		/* SR17 DDR */
+    XGINew_SetReg1( P3c4 , 0x1A , 0x87 ) ;		/* SR1A */
+
+    temp = XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) ;
+    if( temp == 0 )
+      XGINew_DDR1x_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+    else
+    {
+      XGINew_SetReg1( P3d4 , 0xB0 , 0x80 ) ;		/* DDRII Dual frequency mode */
+      XGINew_DDR2_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+    }
+    XGINew_SetReg1( P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR_MRS(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+    /* SR16 <- 1F,DF,2F,AF */
+    /* yriver modified SR16 <- 0F,DF,0F,AF */
+    /* enable DLL of DDR SD/SGRAM , SR16 D4=1 */
+    data = pVideoMemory[ 0xFB ] ;
+    /* data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ; */
+
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xC0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0x80 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xD0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xA0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+/*
+   else {
+     data &= 0x0F;
+     data |= 0x10;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+     if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+     {
+       data &= 0x0F;
+     }
+
+     data |= 0xC0;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+
+     data &= 0x0F;
+     data |= 0x20;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+     if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+     {
+       data &= 0x0F;
+     }
+
+     data |= 0x80;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+   }
+*/
+}
+
+
+/* check if read cache pointer is correct */
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_VerifyMclk */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_VerifyMclk( PXGI_HW_DEVICE_INFO  HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    PUCHAR pVideoMemory = pVBInfo->FBAddr ;
+    UCHAR i , j ;
+    USHORT Temp , SR21 ;
+
+    pVideoMemory[ 0 ] = 0xaa ; 		/* alan */
+    pVideoMemory[ 16 ] = 0x55 ; 	/* note: PCI read cache is off */
+
+    if ( ( pVideoMemory[ 0 ] != 0xaa ) || ( pVideoMemory[ 16 ] != 0x55 ) )
+    {
+        for( i = 0 , j = 16 ; i < 2 ; i++ , j += 16 )
+        {
+            SR21 = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+            Temp = SR21 & 0xFB ;	/* disable PCI post write buffer empty gating */
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , Temp ) ;
+
+            Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+            Temp |= 0x01 ;		/* MCLK reset */
+
+
+            Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+            Temp &= 0xFE ;		/* MCLK normal operation */
+
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , SR21 ) ;
+
+            pVideoMemory[ 16 + j ] = j ;
+            if ( pVideoMemory[ 16 + j ] == j )
+            {
+                pVideoMemory[ j ] = j ;
+                break ;
+            }
+        }
+    }
+}
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+    XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+    XGI_DisplayOff( HwDeviceExtension, pVBInfo );
+
+    /*data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;*/
+    /*data |= 0x20 ;*/
+    /*XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;*/			/* Turn OFF Display */
+    XGINew_DDRSizing340( HwDeviceExtension, pVBInfo ) ;
+    data=XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    pVBInfo->ROMAddr  = HwDeviceExtension->pjVirtualRomBase ,
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+#ifdef XGI301
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x40 ) ; */
+#endif
+
+#ifdef XGI302	/* alan,should change value */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x4D ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x31 , 0xc0 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , 0x3F ) ;
+#endif
+
+    XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;
+    data |= 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;		/* Turn OFF Display */
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , ( USHORT )( data | 0x0F ) ) ;		/* assume lowest speed DRAM */
+
+    XGINew_SetDRAMModeRegister( pVBInfo ) ;
+    XGINew_DisableRefresh( HwDeviceExtension, pVBInfo ) ;
+    XGINew_CheckBusWidth_310( pVBInfo) ;
+    XGINew_VerifyMclk( HwDeviceExtension, pVBInfo ) ;	/* alan 2000/7/3 */
+
+
+
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+        XGINew_SDRSizing( pVBInfo ) ;
+    }
+    else
+    {
+        XGINew_DDRSizing( pVBInfo) ;
+    }
+
+
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , pVBInfo->SR15[ 1 ][ XGINew_RAMType ] ) ;	/* restore SR16 */
+
+    XGINew_EnableRefresh(  HwDeviceExtension, pVBInfo ) ;
+    data=XGINew_GetReg1( pVBInfo->P3c4 ,0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR data ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+    if ( HwDeviceExtension->jChipType < XG20 )                  /* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+    {
+        data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ) >> 1 ;
+        if ( data == 0x01 )
+            XGINew_DDR2x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+        else
+            XGINew_DDR1x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+    }
+    else
+        XGINew_DDR2_MRS_XG20( HwDeviceExtension, pVBInfo->P3c4, pVBInfo);
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister( PVB_DEVICE_INFO pVBInfo)
+{
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+      XGINew_SDR_MRS(pVBInfo ) ;
+    }
+    else
+    {
+      /* SR16 <- 0F,CF,0F,8F */
+      XGINew_DDR_MRS( pVBInfo ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+    data &= 0xF8 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , data ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableChannelInterleaving */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableChannelInterleaving( int index , USHORT XGINew_DDRDRAM_TYPE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+    data &= 0x1F ;
+
+    switch( XGINew_DDRDRAM_TYPE[ index ][ 3 ] )
+    {
+        case 64:
+            data |= 0 ;
+            break ;
+        case 32:
+            data |= 0x20 ;
+            break ;
+        case 16:
+            data |= 0x40 ;
+            break ;
+        case 4:
+            data |= 0x60 ;
+            break ;
+        default:
+            break ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizingType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSizingType( int index , USHORT DRAMTYPE_TABLE[][ 5 ] ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    data = DRAMTYPE_TABLE[ index ][ 4 ] ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x13 , 0x80 , data ) ;
+    DelayUS( 15 ) ;
+   /* should delay 50 ns */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBusWidth_310 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    PULONG volatile pVideoMemory ;
+
+    pVideoMemory = (PULONG) pVBInfo->FBAddr;
+
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x12 ) ;
+        /* should delay */
+        XGINew_SDR_MRS( pVBInfo ) ;
+
+        XGINew_ChannelAB = 0 ;
+        XGINew_DataBusWidth = 128 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xFFFFFFFFL ;
+        pVideoMemory[ 7 ] = 0xFFFFFFFFL ;
+
+        if ( ( pVideoMemory[ 3 ] != 0xCDEF0123L ) || ( pVideoMemory[ 2 ] != 0x89ABCDEFL ) )
+        {
+            /* ChannelA64Bit */
+            XGINew_DataBusWidth = 64 ;
+            XGINew_ChannelAB = 0 ;
+            data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( data & 0xFD ) ) ;
+        }
+
+        if ( ( pVideoMemory[ 1 ] != 0x456789ABL ) || ( pVideoMemory[ 0 ] != 0x01234567L ) )
+        {
+            /* ChannelB64Bit */
+            XGINew_DataBusWidth = 64 ;
+            XGINew_ChannelAB = 1 ;
+            data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( ( data & 0xFD ) | 0x01 ) ) ;
+        }
+
+        return ;
+    }
+    else
+    {
+        /* DDR Dual channel */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x02 ) ;	/* Channel A, 64bit */
+        /* should delay */
+        XGINew_DDR_MRS( pVBInfo ) ;
+
+        XGINew_ChannelAB = 0 ;
+        XGINew_DataBusWidth = 64 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+        pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+        if ( pVideoMemory[ 1 ] == 0x456789ABL )
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel A 64bit */
+                return ;
+            }
+        }
+        else
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel A 32bit */
+                XGINew_DataBusWidth = 32 ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x00 ) ;
+                return ;
+            }
+        }
+
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x03 ) ;	/* Channel B, 64bit */
+        XGINew_DDR_MRS( pVBInfo);
+
+        XGINew_ChannelAB = 1 ;
+        XGINew_DataBusWidth = 64 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+        pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+        if ( pVideoMemory[ 1 ] == 0x456789ABL )
+        {
+            /* Channel B 64 */
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel B 64bit */
+                return ;
+            }
+            else
+            {
+                /* error */
+            }
+        }
+        else
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel B 32 */
+                XGINew_DataBusWidth = 32 ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x01 ) ;
+            }
+            else
+            {
+                /* error */
+            }
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetRank( int index , UCHAR RankNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    int RankSize ;
+
+    if ( ( RankNo == 2 ) && ( DRAMTYPE_TABLE[ index ][ 0 ] == 2 ) )
+        return 0 ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] / 2 * XGINew_DataBusWidth / 32 ;
+
+    if ( ( RankNo * RankSize ) <= 128 )
+    {
+        data = 0 ;
+
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+        data |= ( RankNo - 1 ) << 2 ;
+        data |= ( XGINew_DataBusWidth / 64 ) & 2 ;
+        data |= XGINew_ChannelAB ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+        /* should delay */
+        XGINew_SDR_MRS( pVBInfo ) ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDDRChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetDDRChannel( int index , UCHAR ChannelNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+    int RankSize ;
+
+    RankSize = DRAMTYPE_TABLE[index][3]/2 * XGINew_DataBusWidth/32;
+    /* RankSize = DRAMTYPE_TABLE[ index ][ 3 ] ; */
+    if ( ChannelNo * RankSize <= 128 )
+    {
+        data = 0 ;
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        if ( ChannelNo == 2 )
+            data |= 0x0C ;
+
+        data |= ( XGINew_DataBusWidth / 32 ) & 2 ;
+        data |= XGINew_ChannelAB ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+        /* should delay */
+        XGINew_DDR_MRS( pVBInfo ) ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckColumn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckColumn( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    /* Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 1 ) ; */
+    Increment = 1 << ( 10 + XGINew_DataBusWidth / 64 ) ;
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+#ifdef WIN2000  /* chiawen for linux solution */
+    DelayUS( 100 ) ;
+#endif
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckBanks( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 2 ) ;
+
+    for( i = 0 , Position = 0 ; i < 4 ; i++ )
+    {
+        /* pVBInfo->FBAddr[ Position ] = Position ; */
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+    for( i = 0 , Position = 0 ; i < 4 ; i++ )
+    {
+        /* if (pVBInfo->FBAddr[ Position ] != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+                  DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* pVBInfo->FBAddr[ Position ] = Position ; */
+        /* *( ( PULONG )( pVBInfo->FBAddr ) ) = Position ; */
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+        /* if ( ( *( PULONG )( pVBInfo->FBAddr ) ) != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG Increment , Position ;
+    USHORT data ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+                       DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+    Increment += Increment / 2 ;
+
+    Position = 0;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 0 ) ) = 0x01234567 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 1 ) ) = 0x456789AB ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 2 ) ) = 0x55555555 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 3 ) ) = 0x55555555 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 4 ) ) = 0xAAAAAAAA ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 5 ) ) = 0xAAAAAAAA ;
+
+    if ( ( *( PULONG )( pVBInfo->FBAddr + 1 ) ) == 0x456789AB )
+        return( 1 ) ;
+
+    if ( ( *( PULONG )( pVBInfo->FBAddr + 0 ) ) == 0x01234567 )
+        return( 0 ) ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+    data &= 0xF3 ;
+    data |= 0x0E ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+    data += 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int r ;
+
+    for( r = RankNo ; r >= 1 ; r-- )
+    {
+        if ( !XGINew_CheckRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+            return( 0 ) ;
+    }
+
+    if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int r ;
+
+    for( r = RankNo ; r >= 1 ; r-- )
+    {
+        if ( !XGINew_CheckDDRRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+            return( 0 ) ;
+    }
+
+    if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+    int    i ;
+    UCHAR  j ;
+
+    for( i = 0 ; i < 13 ; i++ )
+    {
+        XGINew_SetDRAMSizingType( i , XGINew_SDRDRAM_TYPE , pVBInfo) ;
+
+        for( j = 2 ; j > 0 ; j-- )
+        {
+            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_SDRDRAM_TYPE , pVBInfo) )
+                continue ;
+            else
+            {
+                if ( XGINew_CheckRanks( j , i , XGINew_SDRDRAM_TYPE, pVBInfo) )
+                    return( 1 ) ;
+            }
+        }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizeReg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSizeReg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data = 0 , memsize = 0 ;
+    int RankSize ;
+    UCHAR ChannelNo ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 32 ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+    data &= 0x80 ;
+
+    if ( data == 0x80 )
+        RankSize *= 2 ;
+
+    data = 0 ;
+
+    if( XGINew_ChannelAB == 3 )
+        ChannelNo = 4 ;
+    else
+        ChannelNo = XGINew_ChannelAB ;
+
+    if ( ChannelNo * RankSize <= 256 )
+    {
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        memsize = data >> 4 ;
+
+        /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+
+       /* data |= XGINew_ChannelAB << 2 ; */
+       /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+       /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+        /* should delay */
+        /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+    }
+    return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize20Reg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSize20Reg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data = 0 , memsize = 0 ;
+    int RankSize ;
+    UCHAR ChannelNo ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 8 ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+    data &= 0x80 ;
+
+    if ( data == 0x80 )
+        RankSize *= 2 ;
+
+    data = 0 ;
+
+    if( XGINew_ChannelAB == 3 )
+        ChannelNo = 4 ;
+    else
+        ChannelNo = XGINew_ChannelAB ;
+
+    if ( ChannelNo * RankSize <= 256 )
+    {
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        memsize = data >> 4 ;
+
+        /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+	DelayUS( 15 ) ;
+
+       /* data |= XGINew_ChannelAB << 2 ; */
+       /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+       /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+        /* should delay */
+        /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+    }
+    return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_ReadWriteRest */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_ReadWriteRest( USHORT StopAddr , USHORT StartAddr, PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Position = 0 ;
+
+   *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+
+    for( i = StartAddr ; i <= StopAddr ; i++ )
+    {
+        Position = 1 << i ;
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+    }
+
+    DelayUS( 500 ) ;	/* [Vicent] 2004/04/16. Fix #1759 Memory Size error in Multi-Adapter. */
+
+    Position = 0 ;
+
+   if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+        return( 0 ) ;
+
+    for( i = StartAddr ; i <= StopAddr ; i++ )
+    {
+        Position = 1 << i ;
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckFrequence */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_CheckFrequence( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+
+    if ( ( data & 0x10 ) == 0 )
+    {
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+        data = ( data & 0x02 ) >> 1 ;
+        return( data ) ;
+    }
+    else
+        return( data & 0x01 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckChannel( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data;
+
+    switch( HwDeviceExtension->jChipType )
+    {
+      case XG20:
+      case XG21:
+          data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+          data = data & 0x01;
+          XGINew_ChannelAB = 1 ;		/* XG20 "JUST" one channel */
+
+          if ( data == 0 )  /* Single_32_16 */
+          {
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x1000000)
+	      {
+
+                XGINew_DataBusWidth = 32 ;	/* 32 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* 22bit + 2 rank + 32bit */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+		DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                    return ;
+
+		if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+		{
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* 22bit + 1 rank + 32bit */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+		  DelayUS( 15 ) ;
+
+                  if ( XGINew_ReadWriteRest( 23 , 23 , pVBInfo ) == 1 )
+                      return ;
+                }
+	      }
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+	      {
+	        XGINew_DataBusWidth = 16 ;	/* 16 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* 22bit + 2 rank + 16bit */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ;
+		DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                    return ;
+                else
+                    XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;
+                    DelayUS( 15 ) ;
+              }
+
+          }
+          else  /* Dual_16_8 */
+          {
+              if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+              {
+
+                XGINew_DataBusWidth = 16 ;	/* 16 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* (0x31:12x8x2) 22bit + 2 rank */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ;  /* 0x41:16Mx16 bit*/
+                DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                    return ;
+
+		if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+		{
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* (0x31:12x8x2) 22bit + 1 rank */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31 ) ;  /* 0x31:8Mx16 bit*/
+                  DelayUS( 15 ) ;
+
+                  if ( XGINew_ReadWriteRest( 22 , 22 , pVBInfo ) == 1 )
+                      return ;
+                }
+	      }
+
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+	      {
+	        XGINew_DataBusWidth = 8 ;	/* 8 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* (0x31:12x8x2) 22bit + 2 rank */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ;  /* 0x30:8Mx8 bit*/
+                DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 22 , 21 , pVBInfo ) == 1 )
+                    return ;
+                else
+                    XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* (0x31:12x8x2) 22bit + 1 rank */
+                    DelayUS( 15 ) ;
+              }
+          }
+          break ;
+
+      case XG27:
+          XGINew_DataBusWidth = 16 ;	/* 16 bits */
+          XGINew_ChannelAB = 1 ;		/* Single channel */
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x51 ) ;  /* 32Mx16 bit*/
+          break ;
+      case XG41:
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 3 ;		/* Quad Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x49 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 3 ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+
+              if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+                  return ;
+              else
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x39 ) ;
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x53 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+
+              if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+                  return ;
+              else
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x43 ) ;
+          }
+
+          break ;
+
+      case XG42:
+/*
+      	  XG42 SR14 D[3] Reserve
+      	  	    D[2] = 1, Dual Channel
+      	  	         = 0, Single Channel
+
+      	  It's Different from Other XG40 Series.
+*/
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )	/* DDRII, DDR2x */
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 2 ;		/* 2 Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x44 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x34 ) ;
+              if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x40 ) ;
+
+              if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ;
+              }
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 1 ;		/* 1 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+              }
+          }
+
+          break ;
+
+      default:	/* XG40 */
+
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )	/* DDRII */
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 3 ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* 2 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  XGINew_ChannelAB = 3 ;	/* 4 channels */
+              else
+              {
+                  XGINew_ChannelAB = 2 ;	/* 2 channels */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+              }
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 2 ;		/* 2 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+              }
+          }
+      	  break ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    USHORT memsize , addr ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , 0x00 ) ;	/* noninterleaving */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1C , 0x00 ) ;	/* nontiling */
+    XGINew_CheckChannel( HwDeviceExtension, pVBInfo ) ;
+
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+      for( i = 0 ; i < 12 ; i++ )
+      {
+        XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+        memsize = XGINew_SetDRAMSize20Reg( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+        if ( memsize == 0 )
+            continue ;
+
+        addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+            continue ;
+
+        if ( XGINew_ReadWriteRest( addr , 5, pVBInfo ) == 1 )
+            return( 1 ) ;
+      }
+    }
+    else
+    {
+      for( i = 0 ; i < 4 ; i++ )
+      {
+    	XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+        memsize = XGINew_SetDRAMSizeReg( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+
+        if ( memsize == 0 )
+            continue ;
+
+        addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+            continue ;
+
+        if ( XGINew_ReadWriteRest( addr , 9, pVBInfo ) == 1 )
+            return( 1 ) ;
+      }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+    int    i ;
+    UCHAR  j ;
+
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE, pVBInfo ) ;
+        XGINew_DisableChannelInterleaving( i , XGINew_DDRDRAM_TYPE , pVBInfo) ;
+        for( j = 2 ; j > 0 ; j-- )
+        {
+            XGINew_SetDDRChannel( i , j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE , pVBInfo ) ;
+            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE, pVBInfo ) )
+                continue ;
+            else
+            {
+                if ( XGINew_CheckDDRRanks( j , i , XGINew_DDRDRAM_TYPE,  pVBInfo ) )
+                return( 1 ) ;
+            }
+        }
+    }
+    return( 0 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetMemoryClock */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x28 , pVBInfo->MCLKData[ XGINew_RAMType ].SR28 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x29 , pVBInfo->MCLKData[ XGINew_RAMType ].SR29 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2A , pVBInfo->MCLKData[ XGINew_RAMType ].SR2A ) ;
+
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , pVBInfo->ECLKData[ XGINew_RAMType ].SR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , pVBInfo->ECLKData[ XGINew_RAMType ].SR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x30 , pVBInfo->ECLKData[ XGINew_RAMType ].SR30 ) ;
+
+    /* [Vicent] 2004/07/07, When XG42 ECLK = MCLK = 207MHz, Set SR32 D[1:0] = 10b */
+    /* [Hsuan] 2004/08/20, Modify SR32 value, when MCLK=207MHZ, ELCK=250MHz, Set SR32 D[1:0] = 10b */
+    if ( HwDeviceExtension->jChipType == XG42 )
+    {
+      if ( ( pVBInfo->MCLKData[ XGINew_RAMType ].SR28 == 0x1C ) && ( pVBInfo->MCLKData[ XGINew_RAMType ].SR29 == 0x01 )
+        && ( ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x1C ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) )
+        || ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x22 ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) ) ) )
+      {
+      	XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) & 0xFC ) | 0x02 ) ;
+      }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : ChkLFB */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN ChkLFB( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( LFBDRAMTrap & XGINew_GetReg1( pVBInfo->P3d4 , 0x78 ) )
+        return( TRUE ) ;
+    else
+        return( FALSE );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* input : dx ,valid value : CR or second chip's CR */
+/*  */
+/* SetPowerConsume : */
+/* Description: reduce 40/43 power consumption in first chip or */
+/* in second chip, assume CR A1 D[6]="1" in this case */
+/* output : none */
+/* --------------------------------------------------------------------- */
+void SetPowerConsume ( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG XGI_P3d4Port )
+{
+    ULONG   lTemp ;
+    UCHAR   bTemp;
+
+    HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x08 , 0 , &lTemp ) ; /* Get */
+    if ((lTemp&0xFF)==0)
+    {
+        /* set CR58 D[5]=0 D[3]=0 */
+        XGINew_SetRegAND( XGI_P3d4Port , 0x58 , 0xD7 ) ;
+        bTemp = (UCHAR) XGINew_GetReg1( XGI_P3d4Port , 0xCB ) ;
+    	if (bTemp&0x20)
+    	{
+            if (!(bTemp&0x10))
+            {
+            	XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x20 ) ; /* CR58 D[5]=1 D[3]=0 */
+            }
+            else
+            {
+            	XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x08 ) ; /* CR58 D[5]=0 D[3]=1 */
+            }
+
+    	}
+
+    }
+}
+
+
+
+#if defined(LINUX_XF86)||defined(LINUX_KERNEL)
+void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+	/* ULONG ROMAddr = (ULONG)HwDeviceExtension->pjVirtualRomBase; */
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+    if ( HwDeviceExtension->jChipType < XG20 )                  /* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+	switch(HwDeviceExtension->jChipType)
+	{
+	case XG40:
+	case XG41:
+	case XG42:
+	case XG20:
+	case XG21:
+	default:
+		InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+		return ;
+	}
+
+}
+#endif /* For Linux */
+
+/* --------------------------------------------------------------------- */
+/* Function : ReadVBIOSTablData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
+{
+    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+    ULONG   i ;
+    UCHAR   j , k ;
+#if 0
+    ULONG   ii , jj ;
+    i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;		/* UniROM */
+    if ( i != 0 )
+        UNIROM = 1 ;
+
+    ii = 0x90 ;
+    for( jj = 0x00 ; jj < 0x08 ; jj++ )
+    {
+        pVBInfo->MCLKData[ jj ].SR28 = pVideoMemory[ ii ] ;
+        pVBInfo->MCLKData[ jj ].SR29 = pVideoMemory[ ii + 1] ;
+        pVBInfo->MCLKData[ jj ].SR2A = pVideoMemory[ ii + 2] ;
+        pVBInfo->MCLKData[ jj ].CLOCK = pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+        ii += 0x05 ;
+    }
+
+    ii = 0xB8 ;
+    for( jj = 0x00 ; jj < 0x08 ; jj++ )
+    {
+        pVBInfo->ECLKData[ jj ].SR2E = pVideoMemory[ ii ] ;
+        pVBInfo->ECLKData[ jj ].SR2F=pVideoMemory[ ii + 1 ] ;
+        pVBInfo->ECLKData[ jj ].SR30= pVideoMemory[ ii + 2 ] ;
+        pVBInfo->ECLKData[ jj ].CLOCK= pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+        ii += 0x05 ;
+    }
+
+    /* Volari customize data area start */
+    /* if ( ChipType == XG40 ) */
+    if ( ChipType >= XG40 )
+    {
+        ii = 0xE0 ;
+        for( jj = 0x00 ; jj < 0x03 ; jj++ )
+        {
+            pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR13, SR14, and SR18 */
+            pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+        ii = 0x110 ;
+        jj = 0x03 ;
+        pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR1B */
+        pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+        pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+        pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+        pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+        pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+        pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+        pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+
+        *pVBInfo->pSR07 = pVideoMemory[ 0x74 ] ;
+        *pVBInfo->pSR1F = pVideoMemory[ 0x75 ] ;
+        *pVBInfo->pSR21 = pVideoMemory[ 0x76 ] ;
+        *pVBInfo->pSR22 = pVideoMemory[ 0x77 ] ;
+        *pVBInfo->pSR23 = pVideoMemory[ 0x78 ] ;
+        *pVBInfo->pSR24 = pVideoMemory[ 0x79 ] ;
+        pVBInfo->SR25[ 0 ] = pVideoMemory[ 0x7A ] ;
+        *pVBInfo->pSR31 = pVideoMemory[ 0x7B ] ;
+        *pVBInfo->pSR32 = pVideoMemory[ 0x7C ] ;
+        *pVBInfo->pSR33 = pVideoMemory[ 0x7D ] ;
+        ii = 0xF8 ;
+
+        for( jj = 0 ; jj < 3 ; jj++ )
+        {
+            pVBInfo->CR40[ jj ][ 0 ] = pVideoMemory[ ii ] ;
+            pVBInfo->CR40[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->CR40[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->CR40[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->CR40[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->CR40[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->CR40[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->CR40[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+
+        ii = 0x118 ;
+        for( j = 3 ; j < 24 ; j++ )
+        {
+            pVBInfo->CR40[ j ][ 0 ] = pVideoMemory[ ii ] ;
+            pVBInfo->CR40[ j ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->CR40[ j ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->CR40[ j ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->CR40[ j ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->CR40[ j ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->CR40[ j ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->CR40[ j ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+
+        i = pVideoMemory[ 0x1C0 ] | ( pVideoMemory[ 0x1C1 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 4 ; k++ )
+                pVBInfo->CR6B[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C2 ] | ( pVideoMemory[ 0x1C3 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 4 ; k++ )
+                pVBInfo->CR6E[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C4 ] | ( pVideoMemory[ 0x1C5 ] << 8 ) ;
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 32 ; k++ )
+                pVBInfo->CR6F[ j ][ k ] = pVideoMemory[ i + 32 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C6 ] | ( pVideoMemory[ 0x1C7 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 2 ; k++ )
+                pVBInfo->CR89[ j ][ k ] = pVideoMemory[ i + 2 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C8 ] | ( pVideoMemory[ 0x1C9 ] << 8 ) ;
+        for( j = 0 ; j < 12 ; j++ )
+            pVBInfo->AGPReg[ j ] = pVideoMemory[ i + j ] ;
+
+        i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;
+        for( j = 0 ; j < 4 ; j++ )
+            pVBInfo->SR16[ j ] = pVideoMemory[ i + j ] ;
+
+        if ( ChipType == XG21 )
+        {
+            if (pVideoMemory[ 0x67 ] & 0x80)
+            {
+                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+            }
+            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+            {
+                *pVBInfo->pCR2E = pVideoMemory[ i + 4 ] ;
+                *pVBInfo->pCR2F = pVideoMemory[ i + 5 ] ;
+                *pVBInfo->pCR46 = pVideoMemory[ i + 6 ] ;
+                *pVBInfo->pCR47 = pVideoMemory[ i + 7 ] ;
+            }
+        }
+
+        if ( ChipType == XG27 )
+        {
+            jj = i+j;
+            for( i = 0 ; i <= 0xB ; i++,jj++ )
+              pVBInfo->pCRD0[i] = pVideoMemory[ jj ] ;
+            for( i = 0x0 ; i <= 0x1 ; i++,jj++ )
+              pVBInfo->pCRDE[i] = pVideoMemory[ jj ] ;
+
+            *pVBInfo->pSR40 = pVideoMemory[ jj ] ;
+            jj++;
+            *pVBInfo->pSR41 = pVideoMemory[ jj ] ;
+
+            if (pVideoMemory[ 0x67 ] & 0x80)
+            {
+                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+            }
+            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+            {
+                jj++;
+                *pVBInfo->pCR2E = pVideoMemory[ jj ] ;
+                *pVBInfo->pCR2F = pVideoMemory[ jj + 1 ] ;
+                *pVBInfo->pCR46 = pVideoMemory[ jj + 2 ] ;
+                *pVBInfo->pCR47 = pVideoMemory[ jj + 3 ] ;
+            }
+
+        }
+
+        *pVBInfo->pCRCF = pVideoMemory[ 0x1CA ] ;
+        *pVBInfo->pXGINew_DRAMTypeDefinition = pVideoMemory[ 0x1CB ] ;
+        *pVBInfo->pXGINew_I2CDefinition = pVideoMemory[ 0x1D1 ] ;
+        if ( ChipType >= XG20 )
+        {
+           *pVBInfo->pXGINew_CR97 = pVideoMemory[ 0x1D2 ] ;
+           if ( ChipType == XG27 )
+           {
+             *pVBInfo->pSR36 = pVideoMemory[ 0x1D3 ] ;
+             *pVBInfo->pCR8F = pVideoMemory[ 0x1D5 ] ;
+           }
+        }
+
+    }
+#endif
+    /* Volari customize data area end */
+
+    if ( ChipType == XG21 )
+    {
+        pVBInfo->IF_DEF_LVDS = 0 ;
+        if (pVideoMemory[ 0x65 ] & 0x1)
+        {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+            i = pVideoMemory[ 0x316 ] | ( pVideoMemory[ 0x317 ] << 8 );
+            j = pVideoMemory[ i-1 ] ;
+            if ( j != 0xff )
+            {
+              k = 0;
+              do
+              {
+                pVBInfo->XG21_LVDSCapList[k].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+                pVBInfo->XG21_LVDSCapList[k].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].VCLKData1 = pVideoMemory[ i + 18 ] ;
+                pVBInfo->XG21_LVDSCapList[k].VCLKData2 = pVideoMemory[ i + 19 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S1 = pVideoMemory[ i + 20 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S2 = pVideoMemory[ i + 21 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S3 = pVideoMemory[ i + 22 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S4 = pVideoMemory[ i + 23 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S5 = pVideoMemory[ i + 24 ] ;
+                i += 25;
+                j--;
+                k++;
+              } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+            }
+            else
+            {
+            pVBInfo->XG21_LVDSCapList[0].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+            pVBInfo->XG21_LVDSCapList[0].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].VCLKData1 = pVideoMemory[ i + 18 ] ;
+            pVBInfo->XG21_LVDSCapList[0].VCLKData2 = pVideoMemory[ i + 19 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S1 = pVideoMemory[ i + 20 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S2 = pVideoMemory[ i + 21 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S3 = pVideoMemory[ i + 22 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S4 = pVideoMemory[ i + 23 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S5 = pVideoMemory[ i + 24 ] ;
+        }
+        }
+    }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        XGINew_DDR2_MRS_XG20( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        //XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+        XGINew_DDRII_Bootup_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo) ;
+
+    //XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+
+}
+/*
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+#ifndef LINUX_XF86
+    UCHAR data ;
+#endif
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+*/
+/* -------------------------------------------------------- */
+/* Function : XGINew_ChkSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx=0 , temp , tempcx , CR3CData;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+
+    if ( temp & Monitor1Sense )
+    	tempbx |= ActiveCRT1 ;
+    if ( temp & LCDSense )
+    	tempbx |= ActiveLCD ;
+    if ( temp & Monitor2Sense )
+    	tempbx |= ActiveCRT2 ;
+    if ( temp & TVSense )
+    {
+    	tempbx |= ActiveTV ;
+    	if ( temp & AVIDEOSense )
+    	    tempbx |= ( ActiveAVideo << 8 );
+    	if ( temp & SVIDEOSense )
+    	    tempbx |= ( ActiveSVideo << 8 );
+    	if ( temp & SCARTSense )
+    	    tempbx |= ( ActiveSCART << 8 );
+    	if ( temp & HiTVSense )
+    	    tempbx |= ( ActiveHiTV << 8 );
+    	if ( temp & YPbPrSense )
+    	    tempbx |= ( ActiveYPbPr << 8 );
+    }
+
+    tempcx = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+    tempcx |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ) ;
+
+    if ( tempbx & tempcx )
+    {
+    	CR3CData = XGINew_GetReg1( pVBInfo->P3d4 , 0x3c ) ;
+    	if ( !( CR3CData & DisplayDeviceFromCMOS ) )
+    	{
+    	    tempcx = 0x1FF0 ;
+    	    if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+    	    {
+    	    	tempbx = 0x1FF0 ;
+    	    }
+    	}
+    }
+    else
+    {
+    	tempcx = 0x1FF0 ;
+    	if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+    	{
+    	    tempbx = 0x1FF0 ;
+    	}
+    }
+
+    tempbx &= tempcx ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x3d , ( tempbx & 0x00FF ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x3e , ( ( tempbx & 0xFF00 ) >> 8 )) ;
+}
+/* -------------------------------------------------------- */
+/* Function : XGINew_SetModeScratch */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , tempcl = 0 , tempch = 0 , CR31Data , CR38Data;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+    temp |= XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ;
+    temp |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & ( DriverMode >> 8) ) << 8 ;
+
+    if ( pVBInfo->IF_DEF_CRT2Monitor == 1)
+    {
+    	if ( temp & ActiveCRT2 )
+    	   tempcl = SetCRT2ToRAMDAC ;
+    }
+
+    if ( temp & ActiveLCD )
+    {
+    	tempcl |= SetCRT2ToLCD ;
+    	if  ( temp & DriverMode )
+    	{
+    	    if ( temp & ActiveTV )
+    	    {
+    	    	tempch = SetToLCDA | EnableDualEdge ;
+    	    	temp ^= SetCRT2ToLCD ;
+
+    	    	if ( ( temp >> 8 ) & ActiveAVideo )
+    	    	    tempcl |= SetCRT2ToAVIDEO ;
+    	    	if ( ( temp >> 8 ) & ActiveSVideo )
+    	    	    tempcl |= SetCRT2ToSVIDEO ;
+    	    	if ( ( temp >> 8 ) & ActiveSCART )
+    	    	    tempcl |= SetCRT2ToSCART ;
+
+    	    	if ( pVBInfo->IF_DEF_HiVision == 1 )
+    	    	{
+    	    	    if ( ( temp >> 8 ) & ActiveHiTV )
+    	    	    tempcl |= SetCRT2ToHiVisionTV ;
+    	    	}
+
+    	    	if ( pVBInfo->IF_DEF_YPbPr == 1 )
+    	    	{
+    	    	    if ( ( temp >> 8 ) & ActiveYPbPr )
+    	    	    tempch |= SetYPbPr ;
+    	    	}
+    	    }
+    	}
+    }
+    else
+    {
+    	if ( ( temp >> 8 ) & ActiveAVideo )
+    	   tempcl |= SetCRT2ToAVIDEO ;
+    	if ( ( temp >> 8 ) & ActiveSVideo )
+  	   tempcl |= SetCRT2ToSVIDEO ;
+    	if ( ( temp >> 8 ) & ActiveSCART )
+   	   tempcl |= SetCRT2ToSCART ;
+
+   	if ( pVBInfo->IF_DEF_HiVision == 1 )
+    	{
+    	   if ( ( temp >> 8 ) & ActiveHiTV )
+    	   tempcl |= SetCRT2ToHiVisionTV ;
+    	}
+
+    	if ( pVBInfo->IF_DEF_YPbPr == 1 )
+    	{
+    	   if ( ( temp >> 8 ) & ActiveYPbPr )
+    	   tempch |= SetYPbPr ;
+    	}
+    }
+
+
+    tempcl |= SetSimuScanMode ;
+    if ( (!( temp & ActiveCRT1 )) && ( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+       tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+    if ( ( temp & ActiveLCD ) && ( temp & ActiveTV ) )
+       tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x30 , tempcl ) ;
+
+    CR31Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+    CR31Data &= ~( SetNotSimuMode >> 8 ) ;
+    if ( !( temp & ActiveCRT1 ) )
+        CR31Data |= ( SetNotSimuMode >> 8 ) ;
+    CR31Data &= ~( DisableCRT2Display >> 8 ) ;
+    if  (!( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+        CR31Data |= ( DisableCRT2Display >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x31 , CR31Data ) ;
+
+    CR38Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+    CR38Data &= ~SetYPbPr ;
+    CR38Data |= tempch ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x38 , CR38Data ) ;
+
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG21Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR Temp;
+    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+
+#ifdef WIN2000
+   pVBInfo->IF_DEF_CH7007 = 0 ;
+    if ( ( pVideoMemory[ 0x65 ] & 0x02 ) )			/* For XG21 CH7007 */
+    {
+        /* VideoDebugPrint((0, "ReadVBIOSTablData: pVideoMemory[ 0x65 ] =%x\n",pVideoMemory[ 0x65 ])); */
+        pVBInfo->IF_DEF_CH7007 = 1 ;                            /* [Billy] 07/05/03 */
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x60 ) ; /* CH7007 on chip */
+    }
+    else
+#endif
+#if 1
+    if (( pVideoMemory[ 0x65 ] & 0x01 ) )			/* For XG21 LVDS */
+    {
+        pVBInfo->IF_DEF_LVDS = 1 ;
+        XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS on chip */
+    }
+    else
+    {
+#endif
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* Enable GPIOA/B read  */
+        Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0xC0;
+        if ( Temp == 0xC0 )
+        {								/* DVI & DVO GPIOA/B pull high */
+          XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) ;
+          XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x20 , 0x20 ) ;   /* Enable read GPIOF */
+          Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x04 ;
+          if ( !Temp )
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x80 ) ; /* TMDS on chip */
+          else
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* Only DVO on chip */
+          XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ;	    /* Disable read GPIOF */
+        }
+#if 1
+    }
+#endif
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG27Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR Temp,bCR4A;
+
+     pVBInfo->IF_DEF_LVDS = 0 ;
+     bCR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x07 , 0x07 ) ; /* Enable GPIOA/B/C read  */
+     Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x07;
+     XGINew_SetReg1( pVBInfo->P3d4, 0x4A , bCR4A ) ;
+
+     if ( Temp <= 0x02 )
+     {
+         pVBInfo->IF_DEF_LVDS = 1 ;
+         XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS setting */
+         XGINew_SetReg1( pVBInfo->P3d4, 0x30 , 0x21 ) ;
+     }
+     else
+     {
+       XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* TMDS/DVO setting */
+     }
+     XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+
+}
+
+UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR38,CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x10 , 0x10 ) ; /* enable GPIOE read */
+    CR38 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+    temp =0;
+    if ( ( CR38 & 0xE0 ) > 0x80 )
+    {
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+        temp &= 0x08;
+        temp >>= 3;
+    }
+
+    XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+    return temp;
+}
+
+UCHAR GetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* enable GPIOA/B/C read */
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+    if ( temp <= 2 )
+    {
+    	temp &= 0x03;
+    }
+    else
+    {
+    	temp = ((temp&0x04)>>1) || ((~temp)&0x01);
+    }
+    XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+    return temp;
+}
+
diff --git a/drivers/staging/xgifb/vb_init.h b/drivers/staging/xgifb/vb_init.h
new file mode 100644
index 00000000000..1f39d9c74cd
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.h
@@ -0,0 +1,7 @@
+#ifndef  _VBINIT_
+#define  _VBINIT_
+extern   BOOLEAN    XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension ) ;
+extern XGI21_LVDSCapStruct  XGI21_LCDCapList[13];
+
+#endif
+
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
new file mode 100644
index 00000000000..bd7f7389864
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -0,0 +1,10736 @@
+#include "osdef.h"
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_table.h"
+
+
+
+#define  IndexMask 0xff
+#ifndef XGI_MASK_DUAL_CHIP
+#define XGI_MASK_DUAL_CHIP	  0x04  /* SR3A */
+#endif
+
+
+
+BOOLEAN  XGI_IsLCDDualLink(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_BacklightByDrv(PVB_DEVICE_INFO pVBInfo);
+
+BOOLEAN  XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_AjustCRT2Rate(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,USHORT *i, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+BOOLEAN  XGI_BridgeIsOn(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_GetModePtr( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetColorDepth(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetVGAHT2(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetVCLK2Ptr(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void     XGI_VBLongWait(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SaveCRT2Info(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetCRT2Data(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetCRT2ResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_PreSetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLockRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup2(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup5(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void*    XGI_GetLcdPtr(USHORT BX,  USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void*    XGI_GetTVPtr(USHORT BX, USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_EnablePWD( PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo);
+void     XGI_AutoThreshold( PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_DisplayOn(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetCRT1Group(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void     XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void	 XGI_UpdateXG21CRTC(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo, USHORT RefreshRateTableIndex);
+void     XGI_WaitDisply(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SenseCRT1(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetSeqRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetMiscRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRTCRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetATTRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetGRCRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_SetSync(USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1CRTC(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void     XGI_SetCRT1Timing_H(PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void     XGI_SetCRT1Timing_V(USHORT ModeIdIndex,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1DE(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1VCLK(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1FIFO(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1ModeRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetVCLKState(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_LoadDAC(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_WriteDAC(USHORT dl, USHORT ah, USHORT al, USHORT dh, PVB_DEVICE_INFO pVBInfo);
+/*void     XGI_ClearBuffer(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);*/
+void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetLVDSResInfo( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetLVDSData(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_ModCRT1Regs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_SetLVDSRegs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_UpdateModeInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_SetCRT2ECLK( USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetLCDSync(USHORT* HSyncWidth, USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void  	 XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT2VCLK(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_OEM310Setting(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetDelayComp(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void     SetSpectrum(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetAntiFlicker(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetEdgeEnhance(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetPhaseIncr(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetYFilter(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void     XGI_CloseCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_OpenCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetRAMDAC2DATA(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGINew_EnableCRT2(PVB_DEVICE_INFO pVBInfo);
+void     XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo);
+void     XGI_LongWait(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1Offset( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo );
+void     XGI_GetLCDVCLKPtr(UCHAR* di_0,UCHAR *di_1, PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetLCDCapPtr(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetLCDCapPtr1(PVB_DEVICE_INFO pVBInfo);
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+UCHAR    XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo );
+
+extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+/* [Billy] 2007/05/17 For CH7007 */
+extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern  UCHAR CH7007TVCRT1UNTSC_H[][10],CH7007TVCRT1ONTSC_H[][10],CH7007TVCRT1UPAL_H[][10],CH7007TVCRT1OPAL_H[][10] ;
+extern  UCHAR CH7007TVCRT1UNTSC_V[][10],CH7007TVCRT1ONTSC_V[][10],CH7007TVCRT1UPAL_V[][10],CH7007TVCRT1OPAL_V[][10] ;
+extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+
+extern  BOOLEAN XGI_XG21CheckCH7007TVMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo ) ;
+extern  void SetCH7007Regs(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo ) ;
+extern  VP_STATUS TurnOnCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern  VP_STATUS TurnOffCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern  BOOLEAN IsCH7007TVMode(PVB_DEVICE_INFO pVBInfo) ;
+#endif
+
+/* USHORT XGINew_flag_clearbuffer; 0: no clear frame buffer 1:clear frame buffer */
+
+
+
+
+
+USHORT XGINew_MDA_DAC[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
+               0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F};
+
+USHORT XGINew_CGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_EGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
+               0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
+               0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
+               0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
+               0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
+               0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
+               0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_VGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
+               0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
+
+               0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
+               0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
+               0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
+               0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
+               0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
+               0x0B,0x0C,0x0D,0x0F,0x10};
+
+
+/* --------------------------------------------------------------------- */
+/* Function : InitTo330Pointer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
+{
+    pVBInfo->SModeIDTable = (XGI_StStruct *) XGI330_SModeIDTable ;
+    pVBInfo->StandTable = (XGI_StandTableStruct *) XGI330_StandTable ;
+    pVBInfo->EModeIDTable = (XGI_ExtStruct *) XGI330_EModeIDTable ;
+    pVBInfo->RefIndex = (XGI_Ext2Struct *) XGI330_RefIndex ;
+    pVBInfo->XGINEWUB_CRT1Table = (XGI_CRT1TableStruct *) XGI_CRT1Table ;
+
+    /* add for new UNIVGABIOS */
+    /* XGINew_UBLCDDataTable = (XGI_LCDDataTablStruct *) XGI_LCDDataTable ; */
+    /* XGINew_UBTVDataTable = (XGI_TVDataTablStruct *) XGI_TVDataTable ; */
+
+
+    if ( ChipType >= XG40 )
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI340New_MCLKData ;
+        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI340_ECLKData ;
+    }
+    else
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI330New_MCLKData ;
+        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI330_ECLKData ;
+    }
+
+    pVBInfo->VCLKData = (XGI_VCLKDataStruct *) XGI_VCLKData ;
+    pVBInfo->VBVCLKData = (XGI_VBVCLKDataStruct *) XGI_VBVCLKData ;
+    pVBInfo->ScreenOffset = XGI330_ScreenOffset ;
+    pVBInfo->StResInfo = (XGI_StResInfoStruct *) XGI330_StResInfo ;
+    pVBInfo->ModeResInfo = (XGI_ModeResInfoStruct *) XGI330_ModeResInfo ;
+
+    pVBInfo->pOutputSelect = &XGI330_OutputSelect ;
+    pVBInfo->pSoftSetting = &XGI330_SoftSetting ;
+    pVBInfo->pSR07 = &XGI330_SR07 ;
+    pVBInfo->LCDResInfo = 0 ;
+    pVBInfo->LCDTypeInfo = 0 ;
+    pVBInfo->LCDInfo = 0 ;
+    pVBInfo->VBInfo = 0 ;
+    pVBInfo->TVInfo = 0;
+
+
+    pVBInfo->SR15 = XGI340_SR13 ;
+    pVBInfo->CR40 = XGI340_cr41 ;
+    pVBInfo->SR25 = XGI330_sr25 ;
+    pVBInfo->pSR31 = &XGI330_sr31 ;
+    pVBInfo->pSR32 = &XGI330_sr32 ;
+    pVBInfo->CR6B = XGI340_CR6B ;
+    pVBInfo->CR6E = XGI340_CR6E ;
+    pVBInfo->CR6F = XGI340_CR6F ;
+    pVBInfo->CR89 = XGI340_CR89 ;
+    pVBInfo->AGPReg = XGI340_AGPReg ;
+    pVBInfo->SR16 = XGI340_SR16 ;
+    pVBInfo->pCRCF = &XG40_CRCF ;
+    pVBInfo->pXGINew_DRAMTypeDefinition = &XG40_DRAMTypeDefinition ;
+
+
+    pVBInfo->CR49 = XGI330_CR49 ;
+    pVBInfo->pSR1F = &XGI330_SR1F ;
+    pVBInfo->pSR21 = &XGI330_SR21 ;
+    pVBInfo->pSR22 = &XGI330_SR22 ;
+    pVBInfo->pSR23 = &XGI330_SR23 ;
+    pVBInfo->pSR24 = &XGI330_SR24 ;
+    pVBInfo->pSR33 = &XGI330_SR33 ;
+
+
+
+    pVBInfo->pCRT2Data_1_2 = &XGI330_CRT2Data_1_2 ;
+    pVBInfo->pCRT2Data_4_D = &XGI330_CRT2Data_4_D ;
+    pVBInfo->pCRT2Data_4_E = &XGI330_CRT2Data_4_E ;
+    pVBInfo->pCRT2Data_4_10 = &XGI330_CRT2Data_4_10 ;
+    pVBInfo->pRGBSenseData = &XGI330_RGBSenseData ;
+    pVBInfo->pVideoSenseData = &XGI330_VideoSenseData ;
+    pVBInfo->pYCSenseData = &XGI330_YCSenseData ;
+    pVBInfo->pRGBSenseData2 = &XGI330_RGBSenseData2 ;
+    pVBInfo->pVideoSenseData2 = &XGI330_VideoSenseData2 ;
+    pVBInfo->pYCSenseData2 = &XGI330_YCSenseData2 ;
+
+    pVBInfo->NTSCTiming = XGI330_NTSCTiming ;
+    pVBInfo->PALTiming = XGI330_PALTiming ;
+    pVBInfo->HiTVExtTiming = XGI330_HiTVExtTiming ;
+    pVBInfo->HiTVSt1Timing = XGI330_HiTVSt1Timing ;
+    pVBInfo->HiTVSt2Timing = XGI330_HiTVSt2Timing ;
+    pVBInfo->HiTVTextTiming = XGI330_HiTVTextTiming ;
+    pVBInfo->YPbPr750pTiming = XGI330_YPbPr750pTiming ;
+    pVBInfo->YPbPr525pTiming = XGI330_YPbPr525pTiming ;
+    pVBInfo->YPbPr525iTiming = XGI330_YPbPr525iTiming ;
+    pVBInfo->HiTVGroup3Data = XGI330_HiTVGroup3Data ;
+    pVBInfo->HiTVGroup3Simu = XGI330_HiTVGroup3Simu ;
+    pVBInfo->HiTVGroup3Text = XGI330_HiTVGroup3Text ;
+    pVBInfo->Ren525pGroup3 = XGI330_Ren525pGroup3 ;
+    pVBInfo->Ren750pGroup3 = XGI330_Ren750pGroup3 ;
+
+
+    pVBInfo->TimingH = (XGI_TimingHStruct *) XGI_TimingH ;
+    pVBInfo->TimingV = (XGI_TimingVStruct *) XGI_TimingV ;
+    pVBInfo->UpdateCRT1 = (XGI_XG21CRT1Struct *) XGI_UpdateCRT1Table ;
+
+    pVBInfo->CHTVVCLKUNTSC = XGI330_CHTVVCLKUNTSC ;
+    pVBInfo->CHTVVCLKONTSC = XGI330_CHTVVCLKONTSC ;
+    pVBInfo->CHTVVCLKUPAL = XGI330_CHTVVCLKUPAL ;
+    pVBInfo->CHTVVCLKOPAL = XGI330_CHTVVCLKOPAL ;
+
+    /* 310 customization related */
+    if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+        pVBInfo->LCDCapList = XGI_LCDDLCapList ;
+    else
+        pVBInfo->LCDCapList = XGI_LCDCapList ;
+
+    if ( ( ChipType == XG21 ) || ( ChipType == XG27 ) )
+        pVBInfo->XG21_LVDSCapList = XGI21_LCDCapList ;
+
+    pVBInfo->XGI_TVDelayList = XGI301TVDelayList ;
+    pVBInfo->XGI_TVDelayList2 = XGI301TVDelayList2 ;
+
+
+    pVBInfo->pXGINew_I2CDefinition = &XG40_I2CDefinition ;
+
+    if ( ChipType >= XG20 )
+    	pVBInfo->pXGINew_CR97 = &XG20_CR97 ;
+
+    if ( ChipType == XG27 )
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI27New_MCLKData ;
+        pVBInfo->CR40 = XGI27_cr41 ;
+    	pVBInfo->pXGINew_CR97 = &XG27_CR97 ;
+    	pVBInfo->pSR36 = &XG27_SR36 ;
+    	pVBInfo->pCR8F = &XG27_CR8F ;
+    	pVBInfo->pCRD0 = XG27_CRD0 ;
+    	pVBInfo->pCRDE = XG27_CRDE ;
+    	pVBInfo->pSR40 = &XG27_SR40 ;
+    	pVBInfo->pSR41 = &XG27_SR41 ;
+
+    }
+
+    if ( ChipType >= XG20 )
+    {
+    	pVBInfo->pDVOSetting = &XG21_DVOSetting ;
+    	pVBInfo->pCR2E = &XG21_CR2E ;
+    	pVBInfo->pCR2F = &XG21_CR2F ;
+    	pVBInfo->pCR46 = &XG21_CR46 ;
+    	pVBInfo->pCR47 = &XG21_CR47 ;
+    }
+
+}
+
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetModeNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
+{
+    USHORT ModeIdIndex ;
+        /* PUCHAR pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ; */
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_CH7007 = 0 ;                                /* [Billy] 2007/05/14 */
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+
+    if ( HwDeviceExtension->jChipType >= XG20 )			/* kuku 2004/06/25 */
+    {
+    	pVBInfo->IF_DEF_YPbPr = 0 ;
+        pVBInfo->IF_DEF_HiVision = 0 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+        pVBInfo->VBType = 0 ;  /*set VBType default 0*/
+    }
+    else if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        pVBInfo->IF_DEF_YPbPr = 1 ;
+        pVBInfo->IF_DEF_HiVision = 1 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 1 ;
+    }
+    else
+    {
+        pVBInfo->IF_DEF_YPbPr = 1 ;
+        pVBInfo->IF_DEF_HiVision = 1 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    }
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3cc = pVBInfo->BaseAddr + 0x1C ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    if ( HwDeviceExtension->jChipType == XG21 )  /* for x86 Linux, XG21 LVDS */
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+        }
+    }
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+          if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+          {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+          }
+        }
+    }
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;
+
+    InitTo330Pointer( HwDeviceExtension->jChipType, pVBInfo ) ;
+#ifdef WIN2000
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+#endif
+    if ( ModeNo & 0x80 )
+    {
+        ModeNo = ModeNo & 0x7F ;
+/* XGINew_flag_clearbuffer = 0 ; */
+    }
+/*    else
+    {
+        XGINew_flag_clearbuffer = 1 ;
+    }
+*/
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 1.Openkey */
+    XGI_UnLockCRT2( HwDeviceExtension , pVBInfo ) ;
+
+    XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+
+    XGI_GetVGAType(HwDeviceExtension,  pVBInfo) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    {
+        XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+        XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_DisableBridge( HwDeviceExtension,pVBInfo ) ;
+/*        XGI_OpenCRTC( HwDeviceExtension, pVBInfo ) ; */
+
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA ) )
+        {
+            XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            {
+                XGI_SetLCDAGroup(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+            }
+        }
+        else
+        {
+            if ( !( pVBInfo->VBInfo & SwitchToCRT2) )
+            {
+                XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    XGI_SetLCDAGroup( ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+                }
+            }
+        }
+
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SwitchToCRT2 ) )
+        {
+            switch( HwDeviceExtension->ujVBChipID )
+            {
+                case VB_CHIP_301:
+                    XGI_SetCRT2Group301( ModeNo , HwDeviceExtension, pVBInfo ) ;		/*add for CRT2 */
+                    break ;
+
+                case VB_CHIP_302:
+                    XGI_SetCRT2Group301(ModeNo , HwDeviceExtension, pVBInfo ) ;		/*add for CRT2 */
+                    break ;
+
+                default:
+                    break ;
+            }
+        }
+
+        XGI_SetCRT2ModeRegs( ModeNo, HwDeviceExtension,pVBInfo ) ;
+        XGI_OEM310Setting( ModeNo, ModeIdIndex,pVBInfo ) ; /*0212*/
+        XGI_CloseCRTC( HwDeviceExtension, pVBInfo ) ;
+        XGI_EnableBridge( HwDeviceExtension ,pVBInfo) ;
+    }	/* !XG20 */
+    else
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+
+            VideoDebugPrint((0, "XGISetModeNew: pVBIfo->IF_DEF_CH7007==1\n"));
+            pVBInfo->VBType = VB_CH7007 ;
+            XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+            XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+            XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+            if( !(XGI_XG21CheckCH7007TVMode(ModeNo, ModeIdIndex, pVBInfo )) )
+            {
+              return FALSE;
+            }
+        }
+#endif
+
+
+        if ( pVBInfo->IF_DEF_LVDS == 1 )
+        {
+            if ( !XGI_XG21CheckLVDSMode(ModeNo , ModeIdIndex, pVBInfo) )
+            {
+              return FALSE;
+            }
+        }
+
+        if ( ModeNo <= 0x13 )
+        {
+            pVBInfo->ModeType = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag & ModeInfoFlag;
+        }
+        else
+        {
+            pVBInfo->ModeType = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & ModeInfoFlag;
+        }
+
+    	pVBInfo->SetFlag = 0 ;
+        if ( pVBInfo->IF_DEF_CH7007 != 1 )
+        {
+    	    pVBInfo->VBInfo = DisableCRT2Display ;
+        }
+
+
+    	XGI_DisplayOff(HwDeviceExtension, pVBInfo) ;
+
+    	XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    	XGI_DisplayOn( HwDeviceExtension, pVBInfo ) ;
+    	/*
+    	if( HwDeviceExtension->jChipType == XG21 )
+    	  XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;
+    	*/
+    }
+
+
+/*
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+    pVBInfo->ModeType = modeflag&ModeInfoFlag ;
+    pVBInfo->SetFlag = 0x00 ;
+    pVBInfo->VBInfo = DisableCRT2Display ;
+    temp = XGINew_CheckMemorySize(  HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( temp == 0 )
+        return( 0 ) ;
+
+    XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+    XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+*/
+
+    XGI_UpdateModeInfo( HwDeviceExtension, pVBInfo ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+{
+    XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+}
+
+    return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Group */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT StandTableIndex ,
+           RefreshRateTableIndex ,
+           b3CC ,
+           temp ;
+
+    USHORT XGINew_P3cc =  pVBInfo->P3cc;
+
+    /* XGINew_CRT1Mode = ModeNo ; // SaveModeID */
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    /* XGI_SetBIOSData(ModeNo , ModeIdIndex ) ; */
+    /* XGI_ClearBankRegs( ModeNo , ModeIdIndex ) ; */
+    XGI_SetSeqRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+    XGI_SetMiscRegs( StandTableIndex,  pVBInfo ) ;
+    XGI_SetCRTCRegs( HwDeviceExtension , StandTableIndex,  pVBInfo) ;
+    XGI_SetATTRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+    XGI_SetGRCRegs(  StandTableIndex, pVBInfo ) ;
+    XGI_ClearExt1Regs(pVBInfo) ;
+
+/* if ( pVBInfo->IF_DEF_ExpLink ) */
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+      if ( pVBInfo->IF_DEF_LVDS == 0 )
+      {
+        XGI_SetDefaultVCLK( pVBInfo ) ;
+      }
+    }
+
+    temp = ~ProgrammingCRT2 ;
+    pVBInfo->SetFlag &= temp ;
+    pVBInfo->SelectCRT2Rate = 0 ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA | SetInSlaveMode ) )
+        {
+            pVBInfo->SetFlag |= ProgrammingCRT2 ;
+         }
+    }
+
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( RefreshRateTableIndex != 0xFFFF )
+    {
+        XGI_SetSync( RefreshRateTableIndex, pVBInfo ) ;
+        XGI_SetCRT1CRTC( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo, HwDeviceExtension ) ;
+        XGI_SetCRT1DE( HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        XGI_SetCRT1Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+        XGI_SetCRT1VCLK( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    }
+
+    if ( ( HwDeviceExtension->jChipType >= XG20 )&&
+         ( HwDeviceExtension->jChipType < XG27 ) ) /* fix H/W DCLK/2 bug */
+    {
+    	if ( ( ModeNo == 0x00 ) | (ModeNo == 0x01) )
+    	{
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x4E) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE9) ;
+    	    b3CC =(UCHAR) XGINew_GetReg2(XGINew_P3cc) ;
+    	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
+    	}
+    	else if ( ( ModeNo == 0x04) | ( ModeNo == 0x05) | ( ModeNo == 0x0D) )
+    	{
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE3) ;
+    	    b3CC = (UCHAR)XGINew_GetReg2(XGINew_P3cc) ;
+    	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
+    	}
+    }
+
+    if ( HwDeviceExtension->jChipType >= XG21 )
+    {
+      temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+      if ( temp & 0xA0 )
+      {
+
+        /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ;*/	/* Enable write GPIOF */
+        /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ 	/* P. DWN */
+        /* XG21 CRT1 Timing */
+        if ( HwDeviceExtension->jChipType == XG27 )
+          XGI_SetXG27CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+        else
+        XGI_SetXG21CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+
+        XGI_UpdateXG21CRTC( ModeNo , pVBInfo , RefreshRateTableIndex) ;
+
+        if ( HwDeviceExtension->jChipType == XG27 )
+          XGI_SetXG27LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+        else
+          XGI_SetXG21LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+
+        if ( pVBInfo->IF_DEF_LVDS == 1 )
+        {
+          if ( HwDeviceExtension->jChipType == XG27 )
+            XGI_SetXG27LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+          else
+            XGI_SetXG21LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+        }
+        /*XGINew_SetRegOR( pVBInfo->P3d4 , 0x48 , 0x20 ) ;*/	/* P. ON */
+      }
+    }
+
+    pVBInfo->SetFlag &= ( ~ProgrammingCRT2 ) ;
+    XGI_SetCRT1FIFO(  ModeNo , HwDeviceExtension,  pVBInfo ) ;
+    XGI_SetCRT1ModeRegs(  HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex , pVBInfo) ;
+
+
+    /* XGI_LoadCharacter(); //dif ifdef TVFont */
+
+    XGI_LoadDAC( ModeNo , ModeIdIndex, pVBInfo ) ;
+    /* XGI_ClearBuffer( HwDeviceExtension , ModeNo, pVBInfo ) ; */
+#ifdef WIN2000
+   if ( pVBInfo->IF_DEF_CH7007 == 1 )  /* [Billy]  2007/05/14  */
+   {
+       VideoDebugPrint((0, "XGI_SetCRT1Group: VBInfo->IF_DEF_CH7007==1\n"));
+       SetCH7007Regs(HwDeviceExtension, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo ) ; /* 07/05/28 */
+   }
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetModePtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR index ;
+
+    if ( ModeNo <= 0x13 )
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_StTableIndex ;
+    else
+    {
+        if ( pVBInfo->ModeType <= 0x02 )
+            index = 0x1B ;	/* 02 -> ModeEGA */
+        else
+            index = 0x0F ;
+    }
+    return( index ) ;		/* Get pVBInfo->StandTable index */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetBIOSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_SetBIOSData( USHORT ModeNo , USHORT ModeIdIndex )
+{
+    return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBankRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_ClearBankRegs( USHORT ModeNo , USHORT ModeIdIndex )
+{
+    return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSeqRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSeqRegs(  USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempah ,
+          SRdata ;
+
+    USHORT i ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x00 , 0x03 ) ;		/* Set SR0 */
+    tempah=pVBInfo->StandTable[ StandTableIndex ].SR[ 0 ] ;
+
+    i = SetCRT2ToLCDA ;
+    if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+    {
+        tempah |= 0x01 ;
+    }
+    else
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+                tempah |= 0x01 ;
+        }
+    }
+
+    tempah |= 0x20 ;		/* screen off */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , tempah ) ;		/* Set SR1 */
+
+    for( i = 02 ; i <= 04 ; i++ )
+    {
+        SRdata = pVBInfo->StandTable[ StandTableIndex ].SR[ i - 1 ] ;	/* Get SR2,3,4 from file */
+        XGINew_SetReg1( pVBInfo->P3c4 , i , SRdata ) ;				/* Set SR2 3 4 */
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetMiscRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetMiscRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR Miscdata ;
+
+    Miscdata = pVBInfo->StandTable[ StandTableIndex ].MISC ;	/* Get Misc from file */
+/*
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            Miscdata |= 0x0C ;
+        }
+    }
+*/
+
+    XGINew_SetReg3( pVBInfo->P3c2 , Miscdata ) ;		/* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRTCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRTCRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR CRTCdata ;
+    USHORT i ;
+
+    CRTCdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    CRTCdata &= 0x7f ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , CRTCdata ) ;		/* Unlock CRTC */
+
+    for( i = 0 ; i <= 0x18 ; i++ )
+    {
+        CRTCdata = pVBInfo->StandTable[ StandTableIndex ].CRTC[ i ] ;	/* Get CRTC from file */
+        XGINew_SetReg1( pVBInfo->P3d4 , i , CRTCdata ) ;				/* Set CRTC( 3d4 ) */
+    }
+/*
+    if ( ( HwDeviceExtension->jChipType == XGI_630 )&& ( HwDeviceExtension->jChipRevision == 0x30 ) )
+    {
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3d4 , 0x18 , 0xFE ) ;
+            }
+        }
+    }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetATTRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR ARdata ;
+    USHORT i ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    for( i = 0 ; i <= 0x13 ; i++ )
+    {
+        ARdata = pVBInfo->StandTable[ StandTableIndex ].ATTR[ i ] ;
+        if ( modeflag & Charx8Dot )	/* ifndef Dot9 */
+        {
+            if ( i == 0x13 )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                    ARdata = 0 ;
+                else
+                {
+                    if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                            ARdata = 0 ;
+                    }
+                }
+            }
+        }
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;			/* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , i ) ;		/* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , ARdata ) ;	/* set data */
+    }
+
+    XGINew_GetReg2( pVBInfo->P3da ) ;			/* reset 3da */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x14 ) ;		/* set index */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;		/* set data */
+    XGINew_GetReg2( pVBInfo->P3da ) ;			/* Enable Attribute */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGRCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR GRdata ;
+    USHORT i ;
+
+    for( i = 0 ; i <= 0x08 ; i++ )
+    {
+        GRdata = pVBInfo->StandTable[ StandTableIndex ].GRC[ i ] ;	/* Get GR from file */
+        XGINew_SetReg1( pVBInfo->P3ce , i , GRdata ) ;			/* Set GR(3ce) */
+    }
+
+    if ( pVBInfo->ModeType > ModeVGA )
+    {
+        GRdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3ce , 0x05 ) ;
+        GRdata &= 0xBF ;						/* 256 color disable */
+        XGINew_SetReg1( pVBInfo->P3ce , 0x05 , GRdata ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearExt1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ;
+
+    for( i = 0x0A ; i <= 0x0E ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0x00 ) ;	/* Clear SR0A-SR0E */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDefaultVCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x20 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 0 ].SR2B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 0 ].SR2C ) ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x10 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 1 ].SR2B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 1 ].SR2C ) ;
+
+    XGINew_SetRegAND( pVBInfo->P3c4 , 0x31 , ~0x30 ) ;
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRatePtrCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    SHORT  LCDRefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 } ,
+           LCDARefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 , 0x01 , 0x01 , 0x01 } ;
+
+    USHORT RefreshRateTableIndex , i ,
+         modeflag , index , temp ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    if ( pVBInfo->IF_DEF_CH7005 == 1 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( modeflag & HalfDCLK )
+                return( 0 ) ;
+        }
+    }
+
+    if ( ModeNo < 0x14 )
+        return( 0xFFFF ) ;
+
+    index = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+    index = index >> pVBInfo->SelectCRT2Rate ;
+    index &= 0x0F ;
+
+    if ( pVBInfo->LCDInfo & LCDNonExpanding )
+        index = 0 ;
+
+    if ( index > 0 )
+        index-- ;
+
+    if ( pVBInfo->SetFlag & ProgrammingCRT2 )
+    {
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                index = 0 ;
+            }
+        }
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            if( pVBInfo->IF_DEF_LVDS == 0 )
+            {
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    temp = LCDARefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ;     /* 301b */
+                else
+                    temp = LCDRefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ;
+
+                if ( index > temp )
+                {
+                    index = temp ;
+                }
+            }
+            else
+            {
+                index = 0 ;
+            }
+        }
+    }
+
+    RefreshRateTableIndex = pVBInfo->EModeIDTable[ ModeIdIndex ].REFindex ;
+    ModeNo = pVBInfo->RefIndex[ RefreshRateTableIndex ].ModeID ;
+    if ( pXGIHWDE->jChipType >= XG20 )  /* for XG20, XG21, XG27 */
+    {
+      /*
+      if ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag & XG2xNotSupport )
+      {
+        index++;
+      }
+      */
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 800 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 600 ) )
+      {
+        index++;
+      }
+/* Alan 10/19/2007; do the similiar adjustment like XGISearchCRT1Rate() */
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1024 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 768 ) )
+      {
+        index++;
+      }
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1280 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 1024 ) )
+      {
+        index++;
+      }
+    }
+
+    i = 0 ;
+    do
+    {
+        if ( pVBInfo->RefIndex[ RefreshRateTableIndex + i ].ModeID != ModeNo )
+            break ;
+        temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i ].Ext_InfoFlag ;
+        temp &= ModeInfoFlag ;
+        if ( temp < pVBInfo->ModeType )
+            break ;
+        i++ ;
+        index-- ;
+
+    } while( index != 0xFFFF ) ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+    {
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i - 1 ].Ext_InfoFlag ;
+            if ( temp & InterlaceMode )
+            {
+                i++ ;
+            }
+        }
+    }
+    i-- ;
+    if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+    {
+        temp = XGI_AjustCRT2Rate( ModeNo , ModeIdIndex , RefreshRateTableIndex , &i, pVBInfo) ;
+    }
+    return( RefreshRateTableIndex + i ) ;                /*return(0x01|(temp1<<1));   */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AjustCRT2Rate */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_AjustCRT2Rate( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , USHORT *i, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax ,
+           tempbx ,
+           resinfo ,
+           modeflag ,
+           infoflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ModeFlag */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    tempbx = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID ;
+    tempax = 0 ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        {
+            tempax |= SupportRAMDAC2 ;
+
+            if ( pVBInfo->VBType & VB_XGI301C )
+                tempax |= SupportCRT2in301C ;
+        }
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )	/* 301b */
+        {
+            tempax |= SupportLCD ;
+
+            if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+            {
+                if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                {
+                    if ( pVBInfo->LCDInfo & LCDNonExpanding )
+                    {
+                        if ( resinfo >= 9 )
+                        {
+                            tempax = 0 ;
+                            return( 0 ) ;
+                        }
+                    }
+                }
+            }
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )	/* for HiTV */
+        {
+            if ( ( pVBInfo->VBType & VB_XGI301LV ) && ( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+            {
+                tempax |= SupportYPbPr ;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( resinfo == 4 )
+                        return( 0 ) ;
+
+                    if ( resinfo == 3 )
+                        return( 0 ) ;
+
+                    if ( resinfo > 7 )
+                        return( 0 ) ;
+                }
+            }
+            else
+            {
+                tempax |= SupportHiVisionTV ;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( resinfo == 4 )
+                        return( 0 ) ;
+
+                    if ( resinfo == 3 )
+                    {
+                        if ( pVBInfo->SetFlag & TVSimuMode )
+                            return( 0 ) ;
+                    }
+
+                    if ( resinfo > 7 )
+                        return( 0 ) ;
+                }
+            }
+        }
+        else
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr | SetCRT2ToHiVisionTV ) )
+            {
+                tempax |= SupportTV ;
+
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                {
+                    tempax |= SupportTV1024 ;
+                }
+
+                if ( !( pVBInfo->VBInfo & SetPALTV ) )
+                {
+                    if ( modeflag & NoSupportSimuTV )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                        {
+                            if ( !( pVBInfo->VBInfo & SetNotSimuMode ) )
+                            {
+                               return( 0 ) ;
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+    else		/* for LVDS */
+    {
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                tempax |= SupportCHTV ;
+            }
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            tempax |= SupportLCD ;
+
+            if ( resinfo > 0x08 )
+                return( 0 ) ;		/* 1024x768 */
+
+            if ( pVBInfo->LCDResInfo < Panel1024x768 )
+            {
+                if ( resinfo > 0x07 )
+                    return( 0 ) ;	/* 800x600 */
+
+                if ( resinfo == 0x04 )
+                    return( 0 ) ;	/* 512x384 */
+            }
+        }
+    }
+
+    for( ; pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID == tempbx ; ( *i )-- )
+    {
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+        if ( infoflag & tempax )
+        {
+            return( 1 ) ;
+        }
+        if ( ( *i ) == 0 )
+            break ;
+    }
+
+    for( ( *i ) = 0 ; ; ( *i )++ )
+    {
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+        if ( pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID != tempbx )
+        {
+            return( 0 ) ;
+        }
+
+        if ( infoflag & tempax )
+        {
+            return( 1 ) ;
+        }
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSync(USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT sync ,
+           temp ;
+
+    sync = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag >> 8 ;	/* di+0x00 */
+    sync &= 0xC0 ;
+    temp = 0x2F ;
+    temp |= sync ;
+    XGINew_SetReg3( pVBInfo->P3c2 , temp ) ;				/* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1CRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1CRTC( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR  index ,
+           data ;
+
+    USHORT i ;
+
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;	/* Get index */
+    index = index&IndexMask ;
+
+    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1(pVBInfo->P3d4,0x11,data);				/* Unlock CRTC */
+
+    for( i = 0 ; i < 8 ; i++ )
+        pVBInfo->TimingH[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i ] ;
+
+    for( i = 0 ; i < 7 ; i++ )
+        pVBInfo->TimingV[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i + 8 ] ;
+
+    XGI_SetCRT1Timing_H( pVBInfo, HwDeviceExtension ) ;
+
+
+
+    XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo, pVBInfo ) ;
+
+
+    if( pVBInfo->ModeType > 0x03 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x14 , 0x4F ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_H */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR data , data1, pushax;
+    USHORT i , j ;
+
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+    /* XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x11 , 0x7f , 0x00 ) ; */
+
+    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;		/* unlock cr0-7 */
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;
+
+    data = pVBInfo->TimingH[ 0 ].data[ 0 ] ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0 , data ) ;
+
+    for( i = 0x01 ; i <= 0x04 ; i++ )
+    {
+        data = pVBInfo->TimingH[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 1 ) , data ) ;
+    }
+
+    for( i = 0x05 ; i <= 0x06 ; i++ )
+    {
+        data = pVBInfo->TimingH[ 0 ].data[ i ];
+        XGINew_SetReg1( pVBInfo->P3c4 ,( USHORT )( i + 6 ) , data ) ;
+    }
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+    j &= 0x1F ;
+    data = pVBInfo->TimingH[ 0 ].data[ 7 ] ;
+    data &= 0xE0 ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0e , data ) ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x04 ) ;
+    	data = data - 1 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x04 , data ) ;
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x05 ) ;
+    	data1 = data ;
+    	data1 &= 0xE0 ;
+    	data &= 0x1F ;
+    	if ( data == 0 )
+    	{
+    	    pushax = data ;
+    	    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0c ) ;
+    	    data &= 0xFB ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x0c , data ) ;
+    	    data = pushax ;
+    	}
+    	data = data - 1 ;
+    	data |= data1 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x05 , data ) ;
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+    	data = data >> 5 ;
+    	data = data + 3 ;
+    	if ( data > 7 )
+    	    data = data - 7 ;
+    	data = data << 5 ;
+    	XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0e , ~0xE0 , data ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_V */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR data ;
+    USHORT i , j ;
+
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+    /* XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , 0x7f , 0x00 ) ; */
+
+    for( i = 0x00 ; i <= 0x01 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 6 ) , data ) ;
+    }
+
+    for( i = 0x02 ; i <= 0x03 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x0e ) , data ) ;
+    }
+
+    for( i = 0x04 ; i <= 0x05 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x11 ) , data ) ;
+    }
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0a ) ;
+    j &= 0xC0 ;
+    data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+    data &= 0x3F ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0a , data ) ;
+
+    data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+    data &= 0x80 ;
+    data = data >> 2 ;
+
+    if ( ModeNo <= 0x13 )
+        i = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        i = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    i &= DoubleScanMode ;
+    if ( i )
+        data |= 0x80 ;
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x09 ) ;
+    j &= 0x5F ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x09 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21CRTC */
+/* Input : Stand or enhance CRTC table */
+/* Output : Fill CRT Hsync/Vsync to SR2E/SR2F/SR30/SR33/SR34/SR3F */
+/* Description : Set LCD timing */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+  UCHAR StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+  USHORT Temp1, Temp2, Temp3 ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ;		/* CR04 HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;    		/* SR2E [7:0]->HRS */
+    Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ;		/* Tempbx: CR05 HRE */
+    Tempbx &= 0x1F ;							/* Tempbx: HRE[4:0] */
+    Tempcx = Tempax ;
+    Tempcx &=  0xE0 ;							/* Tempcx: HRS[7:5] */
+    Tempdx = Tempcx | Tempbx ;						/* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+    if ( Tempbx < ( Tempax & 0x1F ) )					/* IF HRE < HRS */
+      Tempdx |= 0x20 ;							/* Tempdx: HRE = HRE + 0x20 */
+    Tempdx <<= 2 ;							/* Tempdx << 2 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ;    		/* SR2F [7:2]->HRE */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ;	/* Tempax: CR16 VRS */
+    Tempbx = Tempax ;							/* Tempbx=Tempax */
+    Tempax &= 0x01 ;							/* Tempax: VRS[0] */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ;   		/* SR33[0]->VRS */
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;		/* Tempax: CR7 VRS */
+    Tempdx = Tempbx >> 1 ;						/* Tempdx: VRS[7:1] */
+    Tempcx = Tempax & 0x04 ;						/* Tempcx: CR7[2] */
+    Tempcx <<= 5 ;							/* Tempcx[7]: VRS[8] */
+    Tempdx |= Tempcx ;							/* Tempdx: VRS[8:1] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempdx ) ;    		/* SR34[7:0]: VRS[8:1] */
+
+    Temp1 = Tempcx << 1 ;						/* Temp1[8]: VRS[8] UCHAR -> USHORT */
+    Temp1 |= Tempbx ;							/* Temp1[8:0]: VRS[8:0] */
+    Tempax &= 0x80 ;							/* Tempax[7]: CR7[7] */
+    Temp2 = Tempax << 2 ;						/* Temp2[9]: VRS[9] */
+    Temp1 |= Temp2 ;							/* Temp1[9:0]: VRS[9:0] */
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ;	/* CR16 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Temp2 = Temp1 & 0x3F0 ;						/* Temp2[9:4]: VRS[9:4] */
+    Temp2 |= Tempax ;							/* Temp2[9:0]: VRE[9:0] */
+    Temp3 = Temp1 & 0x0F ;						/* Temp3[3:0]: VRS[3:0] */
+    if ( Tempax < Temp3 )						/* VRE[3:0]<VRS[3:0] */
+      Temp2 |= 0x10 ;							/* Temp2: VRE + 0x10 */
+    Temp2 &= 0xFF ;							/* Temp2[7:0]: VRE[7:0] */
+    Tempax = (UCHAR)Temp2 ;						/* Tempax[7:0]: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
+    Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
+    Temp1 >>= 9 ;							/* [10:9]->[1:0] */
+    Tempbx = (UCHAR)Temp1 ;						/* Tempbx[1:0]: VRS[10:9] */
+    Tempax |= Tempbx ;							/* VRE[5:0]VRS[10:9] */
+    Tempax &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
+  }
+  else
+  {
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempcx = Tempax ;							/* Tempcx: HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;  		        /* SR2E[7:0]->HRS */
+
+    Tempdx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SRB */
+    Tempdx &= 0xC0 ;							/* Tempdx[7:6]: SRB[7:6] */
+    Temp1 = Tempdx ;							/* Temp1[7:6]: HRS[9:8] */
+    Temp1 <<= 2 ;							/* Temp1[9:8]: HRS[9:8] */
+    Temp1 |= Tempax ;							/* Temp1[9:0]: HRS[9:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ;		/* CR5 HRE */
+    Tempax &= 0x1F ;							/* Tempax[4:0]: HRE[4:0] */
+
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ;		/* SRC */
+    Tempbx &= 0x04 ;							/* Tempbx[2]: HRE[5] */
+    Tempbx <<= 3 ;							/* Tempbx[5]: HRE[5] */
+    Tempax |= Tempbx ;							/* Tempax[5:0]: HRE[5:0] */
+
+    Temp2 = Temp1 & 0x3C0 ;						/* Temp2[9:6]: HRS[9:6] */
+    Temp2 |= Tempax ;							/* Temp2[9:0]: HRE[9:0] */
+
+    Tempcx &= 0x3F ;							/* Tempcx[5:0]: HRS[5:0] */
+    if( Tempax < Tempcx )						/* HRE < HRS */
+      Temp2 |= 0x40 ;                                                   /* Temp2 + 0x40 */
+
+    Temp2 &= 0xFF ;
+    Tempax = (UCHAR)Temp2 ;						/* Tempax: HRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax[7:2]: HRE[5:0] */
+    Tempdx >>= 6 ;							/* Tempdx[7:6]->[1:0] HRS[9:8] */
+    Tempax |= Tempdx ;							/* HRE[5:0]HRS[9:8] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ;    		/* SR2F D[7:2]->HRE, D[1:0]->HRS */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ;		/* CR10 VRS */
+    Tempbx = Tempax ;							/* Tempbx: VRS */
+    Tempax &= 0x01 ;							/* Tempax[0]: VRS[0] */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ;   		/* SR33[0]->VRS[0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ;		/* CR7[2][7] VRE */
+    Tempcx = Tempbx >> 1 ;				   		/* Tempcx[6:0]: VRS[7:1] */
+    Tempdx = Tempax & 0x04 ;						/* Tempdx[2]: CR7[2] */
+    Tempdx <<= 5 ;							/* Tempdx[7]: VRS[8] */
+    Tempcx |= Tempdx ;							/* Tempcx[7:0]: VRS[8:1] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempcx ) ;   		/* SR34[8:1]->VRS */
+
+    Temp1 = Tempdx ;							/* Temp1[7]: Tempdx[7] */
+    Temp1 <<= 1 ;							/* Temp1[8]: VRS[8] */
+    Temp1 |= Tempbx ;							/* Temp1[8:0]: VRS[8:0] */
+    Tempax &= 0x80 ;
+    Temp2 = Tempax << 2 ;						/* Temp2[9]: VRS[9] */
+    Temp1 |= Temp2 ;							/* Temp1[9:0]: VRS[9:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempax: SRA */
+    Tempax &= 0x08 ;							/* Tempax[3]: VRS[3] */
+    Temp2 = Tempax ;
+    Temp2 <<= 7 ;							/* Temp2[10]: VRS[10] */
+    Temp1 |= Temp2 ;							/* Temp1[10:0]: VRS[10:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ;		/* Tempax: CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempbx: SRA */
+    Tempbx &= 0x20 ;							/* Tempbx[5]: VRE[5] */
+    Tempbx >>= 1 ;							/* Tempbx[4]: VRE[4] */
+    Tempax |= Tempbx ;							/* Tempax[4:0]: VRE[4:0] */
+    Temp2 = Temp1 & 0x7E0 ;						/* Temp2[10:5]: VRS[10:5] */
+    Temp2 |= Tempax ;							/* Temp2[10:5]: VRE[10:5] */
+
+    Temp3 = Temp1 & 0x1F ;						/* Temp3[4:0]: VRS[4:0] */
+    if ( Tempax < Temp3 )						/* VRE < VRS */
+      Temp2 |= 0x20 ;							/* VRE + 0x20 */
+
+    Temp2 &= 0xFF ;
+    Tempax = (UCHAR)Temp2 ;						/* Tempax: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax[7:0]; VRE[5:0]00 */
+    Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
+    Temp1 >>= 9 ;  							/* Temp1[1:0]: VRS[10:9] */
+    Tempbx = (UCHAR)Temp1 ;
+    Tempax |= Tempbx ;							/* Tempax[7:0]: VRE[5:0]VRS[10:9] */
+    Tempax &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
+  }
+}
+
+void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+  USHORT StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ;		/* CR04 HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;    		/* SR2E [7:0]->HRS */
+    Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ;		/* Tempbx: CR05 HRE */
+    Tempbx &= 0x1F ;							/* Tempbx: HRE[4:0] */
+    Tempcx = Tempax ;
+    Tempcx &=  0xE0 ;							/* Tempcx: HRS[7:5] */
+    Tempdx = Tempcx | Tempbx ;						/* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+    if ( Tempbx < ( Tempax & 0x1F ) )					/* IF HRE < HRS */
+      Tempdx |= 0x20 ;							/* Tempdx: HRE = HRE + 0x20 */
+    Tempdx <<= 2 ;							/* Tempdx << 2 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ;    		/* SR2F [7:2]->HRE */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ;	/* Tempax: CR10 VRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ;   		/* SR34[7:0]->VRS */
+    Tempcx = Tempax ;							/* Tempcx=Tempax=VRS[7:0] */
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;		/* Tempax[7][2]: CR7[7][2] VRS[9][8] */
+    Tempbx = Tempax ;							/* Tempbx=CR07 */
+    Tempax &= 0x04 ;     						/* Tempax[2]: CR07[2] VRS[8] */
+    Tempax >>= 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01, Tempax ) ;        /* SR35 D[0]->VRS D[8] */
+    Tempcx |= (Tempax << 8) ;					        /* Tempcx[8] |= VRS[8] */
+    Tempcx |= (Tempbx & 0x80)<<2;					/* Tempcx[9] |= VRS[9] */
+
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ;	/* CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax: VRE[3:0] */
+    Tempbx = Tempcx ;							/* Tempbx=Tempcx=VRS[9:0] */
+    Tempbx &= 0x3F0 ;    						/* Tempbx[9:4]: VRS[9:4] */
+    Tempbx |= Tempax ;							/* Tempbx[9:0]: VRE[9:0] */
+    if ( Tempax <= (Tempcx & 0x0F) )					/* VRE[3:0]<=VRS[3:0] */
+      Tempbx |= 0x10 ;							/* Tempbx: VRE + 0x10 */
+    Tempax = (UCHAR)Tempbx & 0xFF;					/* Tempax[7:0]: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
+    Tempcx = (Tempcx&0x600)>>8;                                         /* Tempcx VRS[10:9] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC, Tempax ) ;        /* SR3F D[7:2]->VRE D[5:0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x06, Tempcx ) ;	/* SR35 D[2:1]->VRS[10:9] */
+  }
+  else
+  {
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempbx = Tempax ;							/* Tempbx: HRS[7:0] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;  		        /* SR2E[7:0]->HRS */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SR0B */
+    Tempax &= 0xC0 ;							/* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+    Tempbx |= (Tempax << 2);					/* Tempbx: HRS[9:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ;		/* CR5 HRE */
+    Tempax &= 0x1F ;							/* Tempax[4:0]: HRE[4:0] */
+    Tempcx = Tempax ;							/* Tempcx: HRE[4:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ;		/* SRC */
+    Tempax &= 0x04 ;							/* Tempax[2]: HRE[5] */
+    Tempax <<= 3 ;							    /* Tempax[5]: HRE[5] */
+    Tempcx |= Tempax ;							/* Tempcx[5:0]: HRE[5:0] */
+
+    Tempbx = Tempbx & 0x3C0 ;					/* Tempbx[9:6]: HRS[9:6] */
+    Tempbx |= Tempcx ;							/* Tempbx: HRS[9:6]HRE[5:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempax &= 0x3F ;							/* Tempax: HRS[5:0] */
+    if( Tempcx <= Tempax )						/* HRE[5:0] < HRS[5:0] */
+      Tempbx += 0x40 ;                          /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SR0B */
+    Tempax &= 0xC0 ;							/* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+    Tempax >>= 6;                               /* Tempax[1:0]: HRS[9:8]*/
+    Tempax |= ((Tempbx << 2) & 0xFF);           /* Tempax[7:2]: HRE[5:0] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ;    		/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ;		/* CR10 VRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ;   		/* SR34[7:0]->VRS[7:0] */
+
+    Tempcx = Tempax ;							/* Tempcx <= VRS[7:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ;		/* CR7[7][2] VRS[9][8] */
+    Tempbx = Tempax ;							/* Tempbx <= CR07[7:0] */
+    Tempax = Tempax & 0x04 ;					/* Tempax[2]: CR7[2]: VRS[8] */
+    Tempax >>= 2 ;							    /* Tempax[0]: VRS[8] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01 , Tempax ) ;   	/* SR35[0]: VRS[8] */
+    Tempcx |= (Tempax<<8) ;						/* Tempcx <= VRS[8:0] */
+    Tempcx |= ((Tempbx&0x80)<<2) ;				/* Tempcx <= VRS[9:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempax: SR0A */
+    Tempax &= 0x08;                             /* SR0A[3] VRS[10] */
+    Tempcx |= (Tempax<<7) ;        				/* Tempcx <= VRS[10:0] */
+
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ;		/* Tempax: CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempbx: SR0A */
+    Tempbx &= 0x20 ;							/* Tempbx[5]: SR0A[5]: VRE[4] */
+    Tempbx >>= 1 ;							    /* Tempbx[4]: VRE[4] */
+    Tempax |= Tempbx ;							/* Tempax[4:0]: VRE[4:0] */
+    Tempbx = Tempcx ;							/* Tempbx: VRS[10:0] */
+    Tempbx &= 0x7E0 ;						    /* Tempbx[10:5]: VRS[10:5] */
+    Tempbx |= Tempax ;							/* Tempbx: VRS[10:5]VRE[4:0] */
+
+    if ( Tempbx <= Tempcx )						/* VRE <= VRS */
+      Tempbx |= 0x20 ;							/* VRE + 0x20 */
+
+    Tempax = (Tempbx<<2) & 0xFF ;					/* Tempax: Tempax[7:0]; VRE[5:0]00 */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , Tempax ) ;	/* SR3F[7:2]:VRE[5:0] */
+    Tempax = Tempcx >> 8;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , Tempax ) ;	/* SR35[2:0]:VRS[10:8] */
+  }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21LCD */
+/* Input : */
+/* Output : FCLK duty cycle, FCLK delay compensation */
+/* Description : All values set zero */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+  USHORT Data , Temp , b3CC ;
+  USHORT XGI_P3cc ;
+
+  XGI_P3cc = pVBInfo->P3cc ;
+
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+  if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+  }
+
+  Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+  if ( Temp & 0x01 )
+  {
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x06 , 0x40 ) ; /* 18 bits FP */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x09 , 0x40 ) ;
+  }
+
+  XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ;   /* Negative blank polarity */
+
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ;
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    if ( b3CC & 0x40 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( b3CC & 0x80 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+  else
+  {
+    Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    if ( Data & 0x4000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( Data & 0x8000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+}
+
+void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+  USHORT Data , Temp , b3CC ;
+  USHORT XGI_P3cc ;
+
+  XGI_P3cc = pVBInfo->P3cc ;
+
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+
+  Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+  if ( ( Temp & 0x03 ) == 0 )  /* dual 12 */
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x13 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x13 ) ;
+  }
+
+  if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+  }
+
+  XGI_SetXG27FPBits(pVBInfo);
+
+  XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ;   /* Negative blank polarity */
+
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ; /* Hsync polarity */
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ; /* Vsync polarity */
+
+  if ( ModeNo <= 0x13 )
+  {
+    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    if ( b3CC & 0x40 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( b3CC & 0x80 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+  else
+  {
+    Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    if ( Data & 0x4000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( Data & 0x8000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateXG21CRTC */
+/* Input : */
+/* Output : CRT1 CRTC */
+/* Description : Modify CRT1 Hsync/Vsync to fix LCD mode timing */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateXG21CRTC( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo , USHORT RefreshRateTableIndex )
+{
+  int i , index = -1;
+
+  XGINew_SetRegAND( pVBInfo->P3d4 , 0x11 , 0x7F ) ;		/* Unlock CR0~7 */
+  if ( ModeNo <= 0x13 )
+  {
+    for( i = 0 ; i < 12 ; i++ )
+    {
+      if ( ModeNo == pVBInfo->UpdateCRT1[ i ].ModeID )
+        index = i ;
+    }
+  }
+  else
+  {
+    if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ==  RES640x480x60 ) )
+      index = 12 ;
+    else if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC == RES640x480x72 ) )
+      index = 13 ;
+    else if ( ModeNo == 0x2F )
+      index = 14 ;
+    else if ( ModeNo == 0x50 )
+      index = 15 ;
+    else if ( ModeNo == 0x59 )
+      index = 16 ;
+  }
+
+  if( index != -1 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x02 , pVBInfo->UpdateCRT1[ index ].CR02 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x03 , pVBInfo->UpdateCRT1[ index ].CR03 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , pVBInfo->UpdateCRT1[ index ].CR15 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , pVBInfo->UpdateCRT1[ index ].CR16 ) ;
+  }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1DE */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT resindex ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           modeflag ;
+
+    UCHAR data ;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempax = pVBInfo->StResInfo[ resindex ].HTotal ;
+        tempbx = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempax = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+        tempbx = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+    }
+
+    if ( modeflag & HalfDCLK )
+        tempax = tempax >> 1 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & HalfDCLK )
+            tempax = tempax << 1 ;
+
+        temp = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+        if ( temp & InterlaceMode )
+            tempbx = tempbx >> 1 ;
+
+        if ( modeflag & DoubleScanMode )
+            tempbx = tempbx << 1 ;
+    }
+
+    tempcx = 8 ;
+
+    /* if ( !( modeflag & Charx8Dot ) ) */
+    /* tempcx = 9 ; */
+
+    tempax /= tempcx ;
+    tempax -= 1 ;
+    tempbx -= 1 ;
+    tempcx = tempax ;
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;		/* Unlock CRTC */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x01 , ( USHORT )( tempcx & 0xff ) ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x0b , ~0x0c , ( USHORT )( ( tempcx & 0x0ff00 ) >> 10 ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x12 , ( USHORT )( tempbx & 0xff ) ) ;
+    tempax = 0 ;
+    tempbx = tempbx >> 8 ;
+
+    if ( tempbx & 0x01 )
+        tempax |= 0x02 ;
+
+    if ( tempbx & 0x02 )
+        tempax |= 0x40 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x42 , tempax ) ;
+    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x07 ) ;
+    data &= 0xFF ;
+    tempax = 0 ;
+
+    if ( tempbx & 0x04 )
+        tempax |= 0x02 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x0a , ~0x02 , tempax ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT 	XGI_GetResInfo(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT resindex ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; 	/* si+St_ResInfo */
+    }
+    else
+    {
+        resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+    return( resindex ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Offset(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp ,
+           ah ,
+           al ,
+           temp2 ,
+           i ,
+           DisplayUnit ;
+
+    /* GetOffset */
+    temp = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+    temp = temp >> 8 ;
+    temp = pVBInfo->ScreenOffset[ temp ] ;
+
+    temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    temp2 &= InterlaceMode ;
+
+    if ( temp2 )
+        temp = temp << 1;
+
+    temp2 = pVBInfo->ModeType - ModeEGA ;
+
+    switch( temp2 )
+    {
+        case 0:
+            temp2 = 1 ;
+            break ;
+        case 1:
+            temp2 = 2 ;
+            break ;
+        case 2:
+            temp2 = 4 ;
+            break ;
+        case 3:
+            temp2 = 4 ;
+            break ;
+        case 4:
+            temp2 = 6 ;
+            break;
+        case 5:
+            temp2 = 8 ;
+            break ;
+        default:
+            break ;
+    }
+
+    if ( ( ModeNo >= 0x26 ) && ( ModeNo <= 0x28 ) )
+        temp = temp * temp2 + temp2 / 2 ;
+    else
+        temp *= temp2 ;
+
+    /* SetOffset */
+    DisplayUnit = temp ;
+    temp2 = temp ;
+    temp = temp >> 8 ;		/* ah */
+    temp &= 0x0F ;
+    i = XGINew_GetReg1( pVBInfo->P3c4 , 0x0E ) ;
+    i &= 0xF0 ;
+    i |= temp ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , i ) ;
+
+    temp =( UCHAR )temp2 ;
+    temp &= 0xFF ;		/* al */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x13 , temp ) ;
+
+    /* SetDisplayUnit */
+    temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    temp2 &= InterlaceMode ;
+    if ( temp2 )
+        DisplayUnit >>= 1 ;
+
+    DisplayUnit = DisplayUnit << 5 ;
+    ah = ( DisplayUnit & 0xff00 ) >> 8 ;
+    al = DisplayUnit & 0x00ff ;
+    if ( al == 0 )
+        ah += 1 ;
+    else
+        ah += 2 ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        if ( ( ModeNo == 0x4A ) | (ModeNo == 0x49 ) )
+            ah -= 1 ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x10 , ah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1VCLK( USHORT ModeNo , USHORT ModeIdIndex ,
+                        PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR index , data ;
+    USHORT vclkindex ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+    else if ( ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) && ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+    {
+        vclkindex = XGI_GetVCLK2Ptr( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        data = pVBInfo->VBVCLKData[ vclkindex ].Part4_A ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+        data = pVBInfo->VBVCLKData[ vclkindex ].Part4_B ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+    else
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+    	if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & HalfDCLK )
+    	{
+    	data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2B ) ;
+    	XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+    	data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2C ) ;
+    	index = data ;
+    	index &= 0xE0 ;
+    	data &= 0x1F ;
+    	data = data << 1 ;
+    	data += 1 ;
+    	data |= index ;
+    	XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+    	}
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1FIFO( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+    data &= 0xfe ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ;	/* diable auto-threshold */
+
+    if ( ModeNo > 0x13 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x34 ) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+        data &= 0xC0 ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x30) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+        data |= 0x01 ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ;
+    }
+    else
+    {
+        if (HwDeviceExtension->jChipType == XG27)
+        {
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x0E ) ;
+          data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+          data &= 0xC0 ;
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x20 ) ;
+        }
+        else
+        {
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0xAE ) ;
+          data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+          data &= 0xF0 ;
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data ) ;
+        }
+    }
+
+    if (HwDeviceExtension->jChipType == XG21)
+    {
+        XGI_SetXG21FPBits(pVBInfo);                 /* Fix SR9[7:6] can't read back */
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1ModeRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
+                            USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ,
+           data2 ,
+           data3 ,
+           infoflag = 0 ,
+           modeflag ,
+           resindex ,
+           xres ;
+
+    if ( ModeNo > 0x13 )
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    }
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;    /* si+St_ModeFlag */
+
+    if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & 0x01 )
+      XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , 0x3F , 0x00 ) ;
+
+    if ( ModeNo > 0x13 )
+        data = infoflag ;
+    else
+        data = 0 ;
+
+    data2 = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( pVBInfo->ModeType > 0x02 )
+        {
+            data2 |= 0x02 ;
+            data3 = pVBInfo->ModeType - ModeVGA ;
+            data3 = data3 << 2 ;
+            data2 |= data3 ;
+        }
+    }
+
+    data &= InterlaceMode ;
+
+    if ( data )
+        data2 |= 0x20 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x3F , data2 ) ;
+    /* XGINew_SetReg1(pVBInfo->P3c4,0x06,data2); */
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+    else
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;                         /* xres->ax */
+
+    data = 0x0000 ;
+    if ( infoflag & InterlaceMode )
+    {
+        if ( xres == 1024 )
+            data = 0x0035 ;
+        else if ( xres == 1280 )
+            data = 0x0048 ;
+    }
+
+    data2 = data & 0x00FF ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFF , data2 ) ;
+    data2 = ( data & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFC , data2 ) ;
+
+    if( modeflag & HalfDCLK )
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xF7 , 0x08 ) ;
+
+    data2 = 0 ;
+
+    if ( modeflag & LineCompareOff )
+        data2 |= 0x08 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( pVBInfo->ModeType == ModeEGA )
+            data2 |= 0x40 ;
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0F , ~0x48 , data2 ) ;
+    data = 0x60 ;
+    if ( pVBInfo->ModeType != ModeText )
+    {
+        data = data ^ 0x60 ;
+        if ( pVBInfo->ModeType != ModeEGA )
+        {
+            data = data ^ 0xA0 ;
+        }
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x21 , 0x1F , data ) ;
+
+    XGI_SetVCLKState( HwDeviceExtension , ModeNo , RefreshRateTableIndex, pVBInfo) ;
+
+    /* if(modeflag&HalfDCLK)//030305 fix lowresolution bug */
+    /* if(XGINew_IF_DEF_NEW_LOWRES) */
+    /* XGI_VesaLowResolution(ModeNo,ModeIdIndex);//030305 fix lowresolution bug */
+
+    data=XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+
+    if (HwDeviceExtension->jChipType == XG27 )
+    {
+    	if ( data & 0x40 )
+    	    data = 0x2c ;
+    	else
+    	    data = 0x6c ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    	XGINew_SetRegOR( pVBInfo->P3d4 , 0x51 , 0x10 ) ;
+    }
+    else
+    if (HwDeviceExtension->jChipType >= XG20 )
+    {
+    	if ( data & 0x40 )
+    	    data = 0x33 ;
+    	else
+    	    data = 0x73 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0x02 ) ;
+    }
+    else
+    {
+    if ( data & 0x40 )
+        data = 0x2c ;
+    else
+        data = 0x6c ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    }
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetVCLKState */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetVCLKState(  PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ,
+           data2 = 0 ;
+    SHORT  VCLK ;
+
+    UCHAR  index ;
+
+    if ( ModeNo <= 0x13 )
+        VCLK = 0 ;
+    else
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        index &= IndexMask ;
+        VCLK = pVBInfo->VCLKData[ index ].CLOCK ;
+    }
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+    data &= 0xf3 ;
+    if ( VCLK >= 200 )
+        data |= 0x0c ;	/* VCLK > 200 */
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        data &= ~0x04 ; /* 2 pixel mode */
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , data ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )
+    {
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+    data &= 0xE7 ;
+    if ( VCLK < 200 )
+        data |= 0x10 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , data ) ;
+    }
+
+/*  Jong for Adavantech LCD ripple issue
+    if ( ( VCLK >= 0 ) && ( VCLK < 135 ) )
+        data2 = 0x03 ;
+    else if ( ( VCLK >= 135 ) && ( VCLK < 160 ) )
+        data2 = 0x02 ;
+    else if ( ( VCLK >= 160 ) && ( VCLK < 260 ) )
+        data2 = 0x01 ;
+    else if ( VCLK > 260 )
+          data2 = 0x00 ;
+*/
+    data2 = 0x00 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x07 , 0xFC , data2 ) ;
+    if (HwDeviceExtension->jChipType >= XG27 )
+    {
+      XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x40 , 0xFC , data2&0x03 ) ;
+    }
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VesaLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGI_VesaLowResolution( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT modeflag;
+
+    if ( ModeNo > 0x13 )
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & DoubleScanMode )
+        {
+            if ( modeflag & HalfDCLK )
+            {
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                {
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                        {
+                            XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+                            XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+                            return ;
+                        }
+                    }
+                }
+                XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0xff , 0x80 ) ;
+                XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+                return ;
+            }
+        }
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LoadDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LoadDAC( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data , data2 , time ,
+           i  , j , k , m , n , o ,
+           si , di , bx , dl , al , ah , dh ,
+           *table = NULL ;
+
+    if ( ModeNo <= 0x13 )
+        data = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        data = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    data &= DACInfoFlag ;
+    time = 64 ;
+
+    if ( data == 0x00 )
+        table = XGINew_MDA_DAC ;
+    else if ( data == 0x08 )
+        table = XGINew_CGA_DAC ;
+    else if ( data == 0x10 )
+        table = XGINew_EGA_DAC ;
+    else if ( data == 0x18 )
+    {
+        time = 256 ;
+        table = XGINew_VGA_DAC ;
+    }
+
+    if ( time == 256 )
+        j = 16 ;
+    else
+        j = time ;
+
+    XGINew_SetReg3( pVBInfo->P3c6 , 0xFF ) ;
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < j ; i++ )
+    {
+        data = table[ i ] ;
+
+        for( k = 0 ; k < 3 ; k++ )
+        {
+            data2 = 0 ;
+
+            if ( data & 0x01 )
+                data2 = 0x2A ;
+
+            if ( data & 0x02 )
+                data2 += 0x15 ;
+
+            XGINew_SetReg3( pVBInfo->P3c9 , data2 ) ;
+            data = data >> 2 ;
+        }
+    }
+
+    if ( time == 256 )
+    {
+        for( i = 16 ; i < 32 ; i++ )
+        {
+            data = table[ i ] ;
+
+            for( k = 0 ; k < 3 ; k++ )
+                XGINew_SetReg3( pVBInfo->P3c9 , data ) ;
+        }
+
+        si = 32 ;
+
+        for( m = 0 ; m < 9 ; m++ )
+        {
+            di = si ;
+            bx = si + 0x04 ;
+            dl = 0 ;
+
+            for( n = 0 ; n < 3 ; n++ )
+            {
+                for( o = 0 ; o < 5 ; o++ )
+                {
+                    dh = table[ si ] ;
+                    ah = table[ di ] ;
+                    al = table[ bx ] ;
+                    si++ ;
+                    XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+                }
+
+                si -= 2 ;
+
+                for( o = 0 ; o < 3 ; o++ )
+                {
+                    dh = table[ bx ] ;
+                    ah = table[ di ] ;
+                    al = table[ si ] ;
+                    si-- ;
+                    XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+                }
+
+                dl++ ;
+            }
+
+            si += 5 ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WriteDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WriteDAC( USHORT dl , USHORT ah , USHORT al , USHORT dh,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , bh , bl ;
+
+    bh = ah ;
+    bl = al ;
+
+    if ( dl != 0 )
+    {
+        temp = bh ;
+        bh = dh ;
+        dh = temp ;
+        if ( dl == 1 )
+        {
+            temp = bl ;
+            bl = dh ;
+            dh = temp ;
+        }
+        else
+        {
+            temp = bl ;
+            bl = bh ;
+            bh = temp ;
+        }
+    }
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )dh ) ;
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bh ) ;
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bl ) ;
+}
+
+#if 0
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBuffer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearBuffer( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo, PVB_DEVICE_INFO  pVBInfo)
+{
+    PVOID VideoMemoryAddress = ( PVOID )HwDeviceExtension->pjVideoMemoryAddress ;
+    ULONG AdapterMemorySize  = ( ULONG )HwDeviceExtension->ulVideoMemorySize ;
+    PUSHORT pBuffer ;
+#ifndef LINUX_XF86
+    int i ;
+#endif
+
+    if ( pVBInfo->ModeType >= ModeEGA )
+    {
+        if ( ModeNo > 0x13 )
+        {
+            AdapterMemorySize = 0x40000 ;	/* clear 256k */
+            /* GetDRAMSize( HwDeviceExtension ) ; */
+            XGI_SetMemory( VideoMemoryAddress , AdapterMemorySize , 0 ) ;
+        }
+        else
+        {
+/*
+            pBuffer = VideoMemoryAddress ;
+            for( i = 0 ; i < 0x4000 ; i++ )
+                pBuffer[ i ] = 0x0000 ;
+*/
+        }
+    }
+    else
+    {
+        pBuffer = VideoMemoryAddress ;
+        if ( pVBInfo->ModeType < ModeCGA )
+        {
+/*
+            for ( i = 0 ; i < 0x4000 ; i++ )
+                pBuffer[ i ] = 0x0720 ;
+*/
+        }
+        else
+            XGI_SetMemory( VideoMemoryAddress , 0x8000 , 0 ) ;
+    }
+}
+
+#endif
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDAGroup */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDAGroup( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT RefreshRateTableIndex ;
+    /* USHORT temp ; */
+
+    /* pVBInfo->SelectCRT2Rate = 0 ; */
+
+    pVBInfo->SetFlag |= ProgrammingCRT2 ;
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetLVDSResInfo(  ModeNo , ModeIdIndex,  pVBInfo ) ;
+    XGI_GetLVDSData( ModeNo , ModeIdIndex , RefreshRateTableIndex,  pVBInfo);
+    XGI_ModCRT1Regs( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetLVDSRegs( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetCRT2ECLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSResInfo( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT resindex , xres , yres , modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+
+
+    /* if ( ModeNo > 0x13 ) */
+    /* modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; */
+    /* else */
+    /* modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; */
+
+    if ( ModeNo <= 0x13 )
+    {
+        resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+
+    /* resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ; */
+
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+    }
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & HalfDCLK )
+            xres = xres << 1 ;
+
+        if ( modeflag & DoubleScanMode )
+            yres = yres << 1 ;
+    }
+    /* if ( modeflag & Charx8Dot ) */
+    /* { */
+
+    if ( xres == 720 )
+        xres = 640 ;
+
+    /* } */
+    pVBInfo->VGAHDE = xres ;
+    pVBInfo->HDE = xres ;
+    pVBInfo->VGAVDE = yres ;
+    pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSData(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempbx ;
+    XGI330_LVDSDataStruct *LCDPtr = NULL ;
+    XGI330_CHTVDataStruct  *TVPtr = NULL ;
+
+    tempbx = 2 ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        LCDPtr = ( XGI330_LVDSDataStruct * )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo) ;
+        pVBInfo->VGAHT = LCDPtr->VGAHT ;
+        pVBInfo->VGAVT = LCDPtr->VGAVT ;
+        pVBInfo->HT = LCDPtr->LCDHT ;
+        pVBInfo->VT = LCDPtr->LCDVT ;
+    }
+    if ( pVBInfo->IF_DEF_CH7017 == 1 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            TVPtr = ( XGI330_CHTVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            pVBInfo->VGAHT = TVPtr->VGAHT ;
+            pVBInfo->VGAVT = TVPtr->VGAVT ;
+            pVBInfo->HT = TVPtr->LCDHT ;
+            pVBInfo->VT = TVPtr->LCDVT ;
+        }
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        if ( !( pVBInfo->LCDInfo & ( SetLCDtoNonExpanding | EnableScalingLCD ) ) )
+        {
+            if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+            {
+                pVBInfo->HDE = 1024 ;
+                pVBInfo->VDE = 768 ;
+            }
+            else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            {
+                pVBInfo->HDE = 1280 ;
+                pVBInfo->VDE = 1024 ;
+            }
+            else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+            {
+                pVBInfo->HDE = 1400 ;
+                pVBInfo->VDE = 1050 ;
+            }
+            else
+            {
+                pVBInfo->HDE = 1600 ;
+                pVBInfo->VDE = 1200 ;
+            }
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ModCRT1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
+                        USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+{
+    UCHAR index ;
+    USHORT tempbx , i ;
+    XGI_LVDSCRT1HDataStruct  *LCDPtr = NULL ;
+    XGI_LVDSCRT1VDataStruct  *LCDPtr1 =NULL ;
+    /* XGI330_CHTVDataStruct *TVPtr = NULL ; */
+    XGI_CH7007TV_TimingHStruct *CH7007TV_TimingHPtr = NULL;
+    XGI_CH7007TV_TimingVStruct *CH7007TV_TimingVPtr = NULL;
+
+    if( ModeNo <= 0x13 )
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    else
+        index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+
+    index= index & IndexMask ;
+
+    if ( ( pVBInfo->IF_DEF_ScaleLCD == 0 ) || ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) ) )
+    {
+        tempbx = 0 ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            LCDPtr = ( XGI_LVDSCRT1HDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+            for( i = 0 ; i < 8 ; i++ )
+                pVBInfo->TimingH[ 0 ].data[ i ] = LCDPtr[ 0 ].Reg[ i ] ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                CH7007TV_TimingHPtr = ( XGI_CH7007TV_TimingHStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+                for( i = 0 ; i < 8 ; i++ )
+                    pVBInfo->TimingH[ 0 ].data[ i ] = CH7007TV_TimingHPtr[ 0 ].data[ i ] ;
+            }
+        }
+
+        /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        } */
+
+        XGI_SetCRT1Timing_H(pVBInfo,HwDeviceExtension) ;
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , CH7007TV_TimingHPtr[ 0 ].data[ 8 ] ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , CH7007TV_TimingHPtr[ 0 ].data[ 9 ] ) ;
+        }
+
+        tempbx = 1 ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            LCDPtr1 = ( XGI_LVDSCRT1VDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            for( i = 0 ; i < 7 ; i++ )
+                pVBInfo->TimingV[ 0 ].data[ i ] = LCDPtr1[ 0 ].Reg[ i ] ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                CH7007TV_TimingVPtr = ( XGI_CH7007TV_TimingVStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+                for( i = 0 ; i < 7 ; i++ )
+                    pVBInfo->TimingV[ 0 ].data[ i ] = CH7007TV_TimingVPtr[ 0 ].data[ i ] ;
+            }
+        }
+        /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        } */
+
+        XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo , pVBInfo) ;
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+    	    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x33 , ~0x01 , CH7007TV_TimingVPtr[ 0 ].data[ 7 ]&0x01 ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , CH7007TV_TimingVPtr[ 0 ].data[8 ] ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , CH7007TV_TimingVPtr[ 0 ].data[9 ] ) ;
+
+        }
+    }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLVDSRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempbx , tempax , tempcx , tempdx , push1 , push2 , modeflag ;
+    unsigned long temp , temp1 , temp2 , temp3 , push3 ;
+    XGI330_LCDDataDesStruct  *LCDPtr = NULL ;
+    XGI330_LCDDataDesStruct2  *LCDPtr1 = NULL ;
+
+    if ( ModeNo > 0x13 )
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+    if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+    {
+        if ( ( pVBInfo->IF_DEF_CH7017 == 0 ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+        {
+            if ( pVBInfo->IF_DEF_OEMUtil == 1 )
+            {
+    	        tempbx = 8 ;
+    	        LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            }
+
+            if ( ( pVBInfo->IF_DEF_OEMUtil == 0 ) || ( LCDPtr == 0 ) )
+            {
+                tempbx = 3 ;
+                if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                    LCDPtr1 = ( XGI330_LCDDataDesStruct2 * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+                else
+                    LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            }
+
+            XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+            push1 = tempbx ;
+            push2 = tempax ;
+
+            /* GetLCDResInfo */
+            if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+            {
+                tempax = 1024 ;
+                tempbx = 768 ;
+            }
+            else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            {
+                tempax = 1280 ;
+                tempbx = 1024 ;
+            }
+            else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+            {
+                tempax = 1400 ;
+                tempbx = 1050 ;
+            }
+            else
+            {
+                tempax = 1600 ;
+                tempbx = 1200 ;
+            }
+
+            if ( pVBInfo->LCDInfo & SetLCDtoNonExpanding )
+            {
+                pVBInfo->HDE=tempax;
+                pVBInfo->VDE=tempbx;
+                pVBInfo->VGAHDE=tempax;
+                pVBInfo->VGAVDE=tempbx;
+            }
+
+            if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( pVBInfo->LCDInfo & EnableScalingLCD ) )
+            {
+                tempax=pVBInfo->HDE;
+                tempbx=pVBInfo->VDE;
+            }
+
+            tempax = pVBInfo->HT ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDHDES ;
+            else
+                tempbx = LCDPtr->LCDHDES ;
+
+            tempcx = pVBInfo->HDE ;
+            tempbx = tempbx & 0x0fff ;
+            tempcx += tempbx ;
+
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , tempbx & 0x07 ) ;
+
+            tempcx = tempcx >> 3 ;
+            tempbx = tempbx >> 3 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , ( USHORT )( tempcx & 0xff ) ) ;
+
+            tempax = pVBInfo->HT ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDHRS ;
+            else
+                tempbx = LCDPtr->LCDHRS ;
+
+            tempcx = push2 ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempcx = LCDPtr1->LCDHSync ;
+
+            tempcx += tempbx ;
+
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            tempax = tempbx & 0x07 ;
+            tempax = tempax >> 5 ;
+            tempcx = tempcx >> 3 ;
+            tempbx = tempbx >> 3 ;
+
+            tempcx &= 0x1f ;
+            tempax |= tempcx ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x15 , tempax ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x14 , ( USHORT )( tempbx & 0xff ) ) ;
+
+            tempax = pVBInfo->VT ;
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDVDES ;
+            else
+                tempbx = LCDPtr->LCDVDES ;
+            tempcx = pVBInfo->VDE ;
+
+            tempbx = tempbx & 0x0fff ;
+            tempcx += tempbx ;
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1b , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1c , ( USHORT )( tempcx & 0xff ) ) ;
+
+            tempbx = ( tempbx >> 8 ) & 0x07 ;
+            tempcx = ( tempcx >> 8 ) & 0x07 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1d , ( USHORT )( ( tempcx << 3 ) | tempbx ) ) ;
+
+            tempax = pVBInfo->VT ;
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDVRS ;
+            else
+                tempbx = LCDPtr->LCDVRS ;
+
+            /* tempbx = tempbx >> 4 ; */
+              tempcx = push1 ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempcx = LCDPtr1->LCDVSync ;
+
+            tempcx += tempbx ;
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , ~0x0f , ( USHORT )( tempcx & 0x0f ) ) ;
+
+            tempax = ( ( tempbx >> 8 ) & 0x07 ) << 3 ;
+
+            tempbx = pVBInfo->VGAVDE ;
+            if ( tempbx != pVBInfo->VDE )
+                tempax |= 0x40 ;
+
+            if ( pVBInfo->LCDInfo & EnableLVDSDDA )
+                tempax |= 0x40 ;
+
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1a , 0x07 , tempax ) ;
+
+            tempcx = pVBInfo->VGAVT ;
+            tempbx = pVBInfo->VDE ;
+            tempax = pVBInfo->VGAVDE ;
+            tempcx -= tempax ;
+
+            temp = tempax ;            /* 0430 ylshieh */
+            temp1 = ( temp << 18 ) / tempbx ;
+
+            tempdx = ( USHORT )( ( temp << 18 ) % tempbx ) ;
+
+            if ( tempdx != 0 )
+            temp1 += 1 ;
+
+            temp2 = temp1 ;
+            push3 = temp2 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x37 , ( USHORT )( temp2 & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x36 , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+
+            tempbx = ( USHORT )( temp2 >> 16 ) ;
+            tempax = tempbx & 0x03 ;
+
+            tempbx = pVBInfo->VGAVDE ;
+            if ( tempbx == pVBInfo->VDE )
+                tempax |= 0x04 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x35 , tempax ) ;
+
+            if ( pVBInfo->VBType & VB_XGI301C )
+            {
+                temp2 = push3 ;
+      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3c , ( USHORT )( temp2 & 0xff ) ) ;
+      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3b , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+      	        tempbx = ( USHORT )( temp2 >> 16 ) ;
+      	        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x3a , ~0xc0 , ( USHORT )( ( tempbx & 0xff ) << 6 ) ) ;
+
+                tempcx = pVBInfo->VGAVDE ;
+                if ( tempcx == pVBInfo->VDE )
+                    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x00 ) ;
+                else
+                    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x08 ) ;
+            }
+
+            tempcx = pVBInfo->VGAHDE ;
+            tempbx = pVBInfo->HDE ;
+
+            temp1 = tempcx << 16 ;
+
+            tempax = ( USHORT )( temp1 / tempbx ) ;
+
+            if ( ( tempbx & 0xffff ) == ( tempcx & 0xffff ) )
+                tempax = 65535 ;
+
+            temp3 = tempax ;
+            temp1 = pVBInfo->VGAHDE << 16 ;
+
+            temp1 /= temp3 ;
+            temp3 = temp3 << 16 ;
+            temp1 -= 1 ;
+
+            temp3 = ( temp3 & 0xffff0000 ) + ( temp1 & 0xffff ) ;
+
+            tempax = ( USHORT )( temp3 & 0xff ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1f , tempax ) ;
+
+            temp1 = pVBInfo->VGAVDE << 18 ;
+            temp1 = temp1 / push3 ;
+            tempbx = ( USHORT )( temp1 & 0xffff ) ;
+
+            if ( pVBInfo->LCDResInfo == Panel1024x768 )
+                tempbx -= 1 ;
+
+            tempax = ( ( tempbx >> 8 ) & 0xff ) << 3 ;
+            tempax |= ( USHORT )( ( temp3 >> 8 ) & 0x07 ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x20 , ( USHORT )( tempax & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x21 , ( USHORT )( tempbx & 0xff ) ) ;
+
+            temp3 = temp3 >> 16 ;
+
+            if ( modeflag & HalfDCLK )
+                temp3 = temp3 >> 1 ;
+
+            XGINew_SetReg1(pVBInfo->Part1Port , 0x22 , ( USHORT )( ( temp3 >> 8 ) & 0xff ) ) ;
+            XGINew_SetReg1(pVBInfo->Part1Port , 0x23 , ( USHORT )( temp3 & 0xff ) ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ECLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    UCHAR di_0 , di_1 , tempal ;
+    int i ;
+
+    tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetVCLKLen( tempal , &di_0 , &di_1, pVBInfo ) ;
+    XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , ~0x30 , ( USHORT )( 0x10 * i ) ) ;
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+        }
+        else if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2e , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2f , di_1 ) ;
+        }
+        else
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateModeInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateModeInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempcl ,
+           tempch ,
+           temp ,
+           tempbl ,
+           tempax ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempcl = 0 ;
+        tempch = 0 ;
+        temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+        if ( !( temp & 0x20 ) )
+        {
+            temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+            if ( temp & 0x80 )
+            {
+                if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+                    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) ;
+                else
+                    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+
+                if ( !( temp & 0x40 ) )
+                    tempcl |= ActiveCRT1 ;
+            }
+        }
+
+        temp = XGINew_GetReg1( pVBInfo->Part1Port , 0x2e ) ;
+        temp &= 0x0f ;
+
+        if ( !( temp == 0x08 ) )
+        {
+            tempax = XGINew_GetReg1( pVBInfo->Part1Port , 0x13 ) ;	/* Check ChannelA by Part1_13 [2003/10/03] */
+            if ( tempax & 0x04 )
+               	tempcl = tempcl | ActiveLCD ;
+
+            temp &= 0x05 ;
+
+            if ( !( tempcl & ActiveLCD ) )
+            	if ( temp == 0x01 )
+                    tempcl |= ActiveCRT2 ;
+
+            if ( temp == 0x04 )
+                tempcl |= ActiveLCD ;
+
+            if ( temp == 0x05 )
+            {
+                temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+
+                if( !( temp & 0x08 ) )
+                    tempch |= ActiveAVideo ;
+
+                if ( !( temp & 0x04 ) )
+                    tempch |= ActiveSVideo ;
+
+                if ( temp & 0x02 )
+                    tempch |= ActiveSCART ;
+
+                if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+                {
+                    if ( temp & 0x01 )
+                        tempch |= ActiveHiTV ;
+                }
+
+                if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+                {
+                    temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x4d ) ;
+
+                    if ( temp & 0x10 )
+                        tempch |= ActiveYPbPr ;
+                }
+
+                if ( tempch != 0 )
+                    tempcl |= ActiveTV ;
+            }
+        }
+
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+        if ( tempcl & ActiveLCD )
+        {
+            if ( ( pVBInfo->SetFlag & ReserveTVOption ) )
+            {
+                if ( temp & ActiveTV )
+                    tempcl |= ActiveTV ;
+            }
+        }
+        temp = tempcl ;
+        tempbl = ~ModeSwitchStatus ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x3d , tempbl , temp ) ;
+
+        if ( !( pVBInfo->SetFlag & ReserveTVOption ) )
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x3e , tempch ) ;
+    }
+    else
+    {
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVGAType( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo)
+{
+    /*
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+        pVBInfo->Set_VGAType = XG20;
+    }
+    else if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        pVBInfo->Set_VGAType = VGA_XGI340 ;
+    }
+    */
+    pVBInfo->Set_VGAType = HwDeviceExtension->jChipType;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo)
+{
+    USHORT flag , tempbx , tempah ;
+
+    if ( pVBInfo->IF_DEF_CH7007 == 1 )
+    {
+        pVBInfo->VBType = VB_CH7007 ;
+        return;
+    }
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        tempbx = VB_XGI302B ;
+        flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+        if ( flag != 0x02 )
+        {
+            tempbx = VB_XGI301 ;
+            flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+            if ( flag >= 0xB0 )
+            {
+                tempbx = VB_XGI301B ;
+                if ( flag >= 0xC0 )
+                {
+                    tempbx = VB_XGI301C ;
+                    if ( flag >= 0xD0 )
+                    {
+                        tempbx = VB_XGI301LV ;
+                        if ( flag >= 0xE0 )
+                        {
+                            tempbx = VB_XGI302LV ;
+                            tempah = XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) ;
+                            if ( tempah != 0xFF )
+                                tempbx = VB_XGI301C ;
+                        }
+                    }
+                }
+
+                if ( tempbx & ( VB_XGI301B | VB_XGI302B ) )
+                {
+                    flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x23 ) ;
+
+                    if ( !( flag & 0x02 ) )
+                        tempbx = tempbx | VB_NoLCD ;
+                }
+            }
+        }
+        pVBInfo->VBType = tempbx ;
+    }
+/*
+    else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        pVBInfo->VBType = VB_CH7017 ;
+    else  //LVDS
+        pVBInfo->VBType = VB_LVDS_NS ;
+*/
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBInfo( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempax ,
+           push ,
+           tempbx ,
+           temp ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    pVBInfo->SetFlag = 0 ;
+    pVBInfo->ModeType = modeflag & ModeInfoFlag ;
+    tempbx = 0 ;
+
+    if ( pVBInfo->VBType & 0xFFFF )
+    {
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) ;           /* Check Display Device */
+        tempbx = tempbx | temp ;
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+        push = temp ;
+        push = push << 8 ;
+        tempax = temp << 8 ;
+        tempbx = tempbx | tempax ;
+        temp = ( SetCRT2ToDualEdge | SetCRT2ToYPbPr | SetCRT2ToLCDA | SetInSlaveMode | DisableCRT2Display ) ;
+        temp = 0xFFFF ^ temp ;
+        tempbx &= temp ;
+
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+
+        if ( pVBInfo->IF_DEF_LCDA == 1 )
+        {
+
+            if ( ( pVBInfo->Set_VGAType >= XG20 ) || ( pVBInfo->Set_VGAType >= XG40 ))
+            {
+                if ( pVBInfo->IF_DEF_LVDS == 0 )
+                {
+                    /* if ( ( pVBInfo->VBType & VB_XGI302B ) || ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) */
+                    if ( pVBInfo->VBType & ( VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        if ( temp & EnableDualEdge )
+                        {
+                            tempbx |= SetCRT2ToDualEdge ;
+
+                            if ( temp & SetToLCDA )
+                                tempbx |= SetCRT2ToLCDA ;
+                        }
+                    }
+                }
+                else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+                {
+                    if ( pVBInfo->VBType & VB_CH7017 )
+                    {
+                        if ( temp & EnableDualEdge )
+                        {
+                            tempbx |= SetCRT2ToDualEdge ;
+
+                            if ( temp & SetToLCDA )
+                                tempbx |= SetCRT2ToLCDA ;
+                        }
+                    }
+                }
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( ( ( pVBInfo->IF_DEF_LVDS == 0 ) && ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) )
+            || ( ( pVBInfo->IF_DEF_CH7017 == 1 ) && ( pVBInfo->VBType&VB_CH7017 ) ) || ( (pVBInfo->IF_DEF_CH7007 == 1) && (pVBInfo->VBType&VB_CH7007) ) )    /* [Billy] 07/05/04 */
+            {
+                if ( temp & SetYPbPr )	/* temp = CR38 */
+                {
+                    if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    {
+                        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;  /* shampoo add for new scratch */
+                        temp &= YPbPrMode ;
+                        tempbx |= SetCRT2ToHiVisionTV ;
+
+                        if ( temp != YPbPrMode1080i ) {
+                            tempbx &= ( ~SetCRT2ToHiVisionTV ) ;
+                            tempbx |= SetCRT2ToYPbPr ; }
+                    }
+
+                    /* tempbx |= SetCRT2ToYPbPr ; */
+                }
+            }
+        }
+
+        tempax = push ;  /* restore CR31 */
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->IF_DEF_YPbPr == 1 )
+            {
+                if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    temp = 0x09FC ;
+                else
+                    temp = 0x097C ;
+            }
+            else
+            {
+                if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    temp = 0x01FC ;
+                else
+                    temp = 0x017C ;
+            }
+        }
+        else	/* 3nd party chip */
+        {
+            if ( pVBInfo->IF_DEF_CH7017 == 1 )
+                temp = ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) ;
+            else if ( pVBInfo->IF_DEF_CH7007 == 1 )  /* [Billy] 07/05/03 */
+            {
+                temp = SetCRT2ToTV ;
+            }
+            else
+                temp = SetCRT2ToLCD ;
+        }
+
+        if ( !( tempbx & temp ) )
+        {
+            tempax |= DisableCRT2Display ;
+            tempbx = 0 ;
+        }
+
+        if ( pVBInfo->IF_DEF_LCDA == 1 )	/* Select Display Device */
+        {
+            if ( !( pVBInfo->VBType & VB_NoLCD ) )
+            {
+                if ( tempbx & SetCRT2ToLCDA )
+                {
+                    if ( tempbx & SetSimuScanMode )
+                        tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SwitchToCRT2 ) ) ;
+                    else
+                        tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SetCRT2ToTV | SwitchToCRT2 ) ) ;
+                }
+            }
+        }
+
+        /* shampoo add */
+        if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) )	/* for driver abnormal */
+        {
+            if ( pVBInfo->IF_DEF_CRT2Monitor == 1 )
+            {
+                if ( tempbx & SetCRT2ToRAMDAC )
+                {
+                    tempbx &= ( 0xFF00 | SetCRT2ToRAMDAC | SwitchToCRT2 | SetSimuScanMode ) ;
+                    tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+                }
+            }
+            else
+                tempbx &= ( ~( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ;
+        }
+
+        if ( !( pVBInfo->VBType & VB_NoLCD ) )
+        {
+            if ( tempbx & SetCRT2ToLCD )
+            {
+                tempbx &= ( 0xFF00 | SetCRT2ToLCD | SwitchToCRT2 | SetSimuScanMode ) ;
+                tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+            }
+        }
+
+        if ( tempbx & SetCRT2ToSCART )
+        {
+            tempbx &= ( 0xFF00 | SetCRT2ToSCART | SwitchToCRT2 | SetSimuScanMode ) ;
+            tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( tempbx & SetCRT2ToYPbPr )
+                tempbx &= ( 0xFF00 | SwitchToCRT2 | SetSimuScanMode ) ;
+        }
+
+        if ( pVBInfo->IF_DEF_HiVision == 1 )
+        {
+            if ( tempbx & SetCRT2ToHiVisionTV )
+                tempbx &= ( 0xFF00 | SetCRT2ToHiVisionTV | SwitchToCRT2 | SetSimuScanMode ) ;
+        }
+
+        if ( tempax & DisableCRT2Display )	/* Set Display Device Info */
+        {
+            if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) )
+                tempbx = DisableCRT2Display ;
+        }
+
+        if ( !( tempbx & DisableCRT2Display ) )
+        {
+            if ( ( !( tempbx & DriverMode ) ) || ( !( modeflag & CRT2Mode ) ) )
+            {
+                if ( pVBInfo->IF_DEF_LCDA == 1 )
+      	        {
+                    if ( !( tempbx & SetCRT2ToLCDA ) )
+                        tempbx |= ( SetInSlaveMode | SetSimuScanMode ) ;
+                }
+
+                if ( pVBInfo->IF_DEF_VideoCapture == 1 )
+                {
+                    if ( ( ( HwDeviceExtension->jChipType == XG40 ) && ( pVBInfo->Set_VGAType == XG40 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG41 ) && ( pVBInfo->Set_VGAType == XG41 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG42 ) && ( pVBInfo->Set_VGAType == XG42 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG45 ) && ( pVBInfo->Set_VGAType == XG45 ) ) )
+                    {
+                        if ( ModeNo <= 13 )
+                        {
+                            if ( !( tempbx & SetCRT2ToRAMDAC ) )	/*CRT2 not need to support*/
+                            {
+                                tempbx &= ( 0x00FF | ( ~SetInSlaveMode ) ) ;
+                                pVBInfo->SetFlag |= EnableVCMode ;
+                            }
+                        }
+                    }
+                }
+            }
+
+            /*LCD+TV can't support in slave mode (Force LCDA+TV->LCDB)*/
+            if ( ( tempbx & SetInSlaveMode ) && ( tempbx & SetCRT2ToLCDA ) )
+            {
+                tempbx ^= ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToDualEdge ) ;
+                pVBInfo->SetFlag |= ReserveTVOption ;
+            }
+        }
+    }
+
+    pVBInfo->VBInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVInfo( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT temp ,
+           tempbx = 0 ,
+           resinfo = 0 ,
+           modeflag ,
+           index1 ;
+
+    tempbx = 0 ;
+    resinfo = 0 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( ModeNo <= 0x13 )
+        {
+            modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ModeFlag */
+            resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+        }
+        else
+        {
+            modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+            resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+            tempbx = temp;
+            if ( tempbx & SetPALTV )
+            {
+                tempbx &= ( SetCHTVOverScan | SetPALMTV | SetPALNTV | SetPALTV ) ;
+                if ( tempbx & SetPALMTV )
+                    tempbx &= ~SetPALTV ; /* set to NTSC if PAL-M */
+            }
+            else
+                tempbx &= ( SetCHTVOverScan | SetNTSCJ | SetPALTV ) ;
+/*
+            if ( pVBInfo->IF_DEF_LVDS == 0 )
+            {
+                index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ; //PAL-M/PAL-N Info
+                temp2 = ( index1 & 0xC0 ) >> 5 ; 	        //00:PAL, 01:PAL-M, 10:PAL-N
+                tempbx |= temp2 ;
+                if ( temp2 & 0x02 )          //PAL-M
+                    tempbx &= ( ~SetPALTV ) ;
+            }
+*/
+        }
+
+        if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+            if ( tempbx & TVOverScan )
+                tempbx |= SetCHTVOverScan ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 07/05/04 */
+        {
+            tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+            if ( tempbx & TVOverScan )
+            {
+                tempbx |= SetCHTVOverScan ;
+            }
+        }
+
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+                tempbx |= SetPALTV ;
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+            {
+                index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+                index1 &= YPbPrMode ;
+
+                if ( index1 == YPbPrMode525i )
+                    tempbx |= SetYPbPrMode525i ;
+
+                if ( index1 == YPbPrMode525p )
+                    tempbx = tempbx | SetYPbPrMode525p;
+                if ( index1 == YPbPrMode750p)
+                    tempbx = tempbx | SetYPbPrMode750p;
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_HiVision == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+            {
+                tempbx = tempbx | SetYPbPrMode1080i | SetPALTV ;
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {      /* shampoo */
+            if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->VBInfo & SetNotSimuMode ) ) )
+                tempbx |= TVSimuMode ;
+
+            if ( !( tempbx & SetPALTV ) && ( modeflag > 13 ) && ( resinfo == 8 ) ) /* NTSC 1024x768, */
+                tempbx |= NTSC1024x768 ;
+
+            tempbx |= RPLLDIV2XO ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+            {
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                    tempbx &=( ~RPLLDIV2XO ) ;
+            }
+            else
+            {
+                if ( tempbx & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+                    tempbx &= ( ~RPLLDIV2XO ) ;
+                else if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+                {
+                    if ( tempbx & TVSimuMode )
+                        tempbx &= ( ~RPLLDIV2XO ) ;
+                }
+            }
+        }
+    }
+    pVBInfo->TVInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_GetLCDInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ,
+           tempax ,
+           tempbx ,
+           modeflag ,
+           resinfo = 0 ,
+           LCDIdIndex ;
+
+    pVBInfo->LCDResInfo = 0 ;
+    pVBInfo->LCDTypeInfo = 0 ;
+    pVBInfo->LCDInfo = 0 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;  /* si+St_ModeFlag // */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo// */
+    }
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ; /* Get LCD Res.Info */
+    tempbx = temp & 0x0F ;
+
+    if ( tempbx == 0 )
+        tempbx = Panel1024x768 ; /* default */
+
+    /* LCD75 [2003/8/22] Vicent */
+    if ( ( tempbx == Panel1024x768 ) || ( tempbx == Panel1280x1024 ) )
+    {
+        if ( pVBInfo->VBInfo & DriverMode )
+        {
+            tempax = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                tempax &= 0x0F ;
+            else
+                tempax = tempax >> 4 ;
+
+            if ( ( resinfo == 6 ) || ( resinfo == 9 ) )
+            {
+                if ( tempax >= 3 )
+      	            tempbx |= PanelRef75Hz ;
+            }
+            else if ( ( resinfo == 7 ) || ( resinfo == 8 ) )
+            {
+      	        if ( tempax >= 4 )
+      	            tempbx |= PanelRef75Hz ;
+            }
+        }
+    }
+
+    pVBInfo->LCDResInfo = tempbx ;
+
+    /* End of LCD75 */
+
+    if( pVBInfo->IF_DEF_OEMUtil == 1 )
+    {
+        pVBInfo->LCDTypeInfo = ( temp & 0xf0 ) >> 4 ;
+    }
+
+    if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+    {
+        return 0;
+    }
+
+    tempbx = 0 ;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+    temp &= ( ScalingLCD | LCDNonExpanding | LCDSyncBit | SetPWDEnable ) ;
+
+    if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( temp & LCDNonExpanding ) )
+        temp &= ~EnableScalingLCD ;
+
+    tempbx |= temp ;
+
+    LCDIdIndex = XGI_GetLCDCapPtr1(pVBInfo) ;
+
+    tempax = pVBInfo->LCDCapList[ LCDIdIndex ].LCD_Capability ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )	/* shampoo */
+    {
+        if ( ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) && ( tempax & LCDDualLink ) )
+        {
+            tempbx |= SetLCDDualLink ;
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_CH7017 == 1 )
+    {
+        if ( tempax & LCDDualLink )
+        {
+            tempbx |= SetLCDDualLink ;
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( ( pVBInfo->LCDResInfo == Panel1400x1050 ) && ( pVBInfo->VBInfo & SetCRT2ToLCD ) && ( ModeNo > 0x13 ) && ( resinfo == 9 ) && ( !( tempbx & EnableScalingLCD ) ) )
+            tempbx |= SetLCDtoNonExpanding ;	/* set to center in 1280x1024 LCDB for Panel1400x1050 */
+    }
+
+/*
+    if ( tempax & LCDBToA )
+    {
+        tempbx |= SetLCDBToA ;
+    }
+*/
+
+    if ( pVBInfo->IF_DEF_ExpLink == 1 )
+    {
+        if ( modeflag & HalfDCLK )
+        {
+            /* if ( !( pVBInfo->LCDInfo&LCDNonExpanding ) ) */
+            if ( !( tempbx & SetLCDtoNonExpanding ) )
+            {
+                tempbx |= EnableLVDSDDA ;
+            }
+            else
+            {
+                if ( ModeNo > 0x13 )
+                {
+                    if ( pVBInfo->LCDResInfo == Panel1024x768 )
+                    {
+                        if ( resinfo == 4 )
+                        {                                /* 512x384  */
+                            tempbx |= EnableLVDSDDA ;
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+    {
+        if ( pVBInfo->VBInfo & SetNotSimuMode )
+        {
+            tempbx |= LCDVESATiming ;
+        }
+    }
+    else
+    {
+        tempbx |= LCDVESATiming ;
+    }
+
+    pVBInfo->LCDInfo = tempbx ;
+
+    if ( pVBInfo->IF_DEF_PWD == 1 )
+    {
+        if ( pVBInfo->LCDInfo & SetPWDEnable )
+        {
+            if ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) )
+            {
+                if ( !( tempax & PWDEnable ) )
+                {
+                    pVBInfo->LCDInfo &= ~SetPWDEnable ;
+                }
+            }
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( !( tempax & LockLCDBToA ) )
+                {
+                    if ( ModeNo <= 0x13 )
+                    {
+                        pVBInfo->VBInfo &= ~( SetSimuScanMode | SetInSlaveMode | SetCRT2ToLCD ) ;
+                        pVBInfo->VBInfo |= SetCRT2ToLCDA | SetCRT2ToDualEdge ;
+                    }
+                }
+            }
+        }
+    }
+
+/*
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( !( ( !( tempax & LockLCDBToA ) ) && ( ModeNo > 0x13 ) ) )
+                {
+                    pVBInfo->VBInfo&=~(SetSimuScanMode|SetInSlaveMode|SetCRT2ToLCD);
+                    pVBInfo->VBInfo|=SetCRT2ToLCDA|SetCRT2ToDualEdge;
+                }
+            }
+        }
+    }
+*/
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SearchModeID */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+
+#ifdef TC
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        VGA_INFO = ( PUCHAR )MK_FP( 0 , 0x489 ) ;
+
+        if ( ModeNo == 0x07 )
+        {
+            if ( ( *VGA_INFO & 0x10 ) != 0 )
+                ( *ModeIdIndex )++ ; /* 400 lines */
+            /* else 350 lines */
+        }
+
+        if ( ModeNo <= 3 )
+        {
+            if ( ( *VGA_INFO & 0x80 ) == 0 )
+            {
+                ( *ModeIdIndex )++ ;
+                if ( ( *VGA_INFO & 0x10 ) != 0 )
+                    ( *ModeIdIndex )++ ; /* 400 lines */
+                /* else 350 lines */
+            }
+            /* else 200 lines */
+        }
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+
+#endif
+
+#ifdef WIN2000
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        if ( ModeNo == 0x07 )
+            ( *ModeIdIndex )++ ; /* 400 lines */
+
+        if ( ModeNo <=3 )
+            ( *ModeIdIndex ) += 2 ; /* 400 lines */
+        /* else 350 lines */
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+#endif
+
+#ifdef LINUX /* chiawen for linux solution */
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        if ( ModeNo == 0x07 )
+            ( *ModeIdIndex )++ ; /* 400 lines */
+
+        if ( ModeNo <= 3 )
+            ( *ModeIdIndex ) += 2 ; /* 400 lines */
+        /* else 350 lines */
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+#endif
+
+    return( TRUE ) ;
+}
+
+
+
+
+/* win2000 MM adapter not support standard mode! */
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT memorysize ,
+           modeflag ,
+           temp ,
+           temp1 ,
+           tmp ;
+
+/*  if ( ( HwDeviceExtension->jChipType == XGI_650 ) ||
+         ( HwDeviceExtension->jChipType == XGI_650M ) )
+    {
+        return( TRUE ) ;
+    } */
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else  {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    /* ModeType = modeflag&ModeInfoFlag ; // Get mode type */
+
+    memorysize = modeflag & MemoryInfoFlag ;
+    memorysize = memorysize > MemorySizeShift ;
+    memorysize++ ;					/* Get memory size */
+
+    temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;	/* Get DRAM Size */
+    tmp = temp ;
+
+    if ( HwDeviceExtension->jChipType == XG40 )
+    {
+        temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+        if ( ( tmp & 0x0c ) == 0x0C )			/* Qual channels */
+        {
+            temp <<= 2 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x08 )		/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG42 )
+    {
+    	temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+        if ( ( tmp & 0x04 ) == 0x04 )			/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG45 )
+    {
+    	temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+    	if ( ( tmp & 0x0c ) == 0x0C )			/* Qual channels */
+        {
+            temp <<= 2 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x08 )		/* triple channels */
+        {
+            temp1 = temp ;
+            temp <<= 1 ;
+            temp += temp1 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x04 )		/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    if ( temp < memorysize )
+        return( FALSE ) ;
+    else
+        return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_IsLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGINew_IsLowResolution( USHORT ModeNo , USHORT ModeIdIndex, BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    USHORT ModeFlag ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+
+    if ( ModeNo > 0x13 )
+    {
+        ModeFlag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        if ( ( ModeFlag & HalfDCLK ) && ( ModeFlag & DoubleScanMode ) )
+        {
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+            data |= 0x80 ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+            data &= 0xF7 ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;
+        }
+    }
+}
+
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR(pVBInfo->P3c4,0x01,0xDF,0x00);
+    if ( pXGIHWDE->jChipType == XG21 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         if (!(XGI_XG21GetPSCValue( pVBInfo )&0x1))
+         {
+            XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+            XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+         }
+         if (!(XGI_XG21GetPSCValue( pVBInfo )&0x20))
+         {
+            XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+         }
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+         XGI_XG21BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+       }
+       else
+       {
+            XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+       }
+
+    }
+
+    if (pVBInfo->IF_DEF_CH7007 == 1) /* [Billy] 07/05/23 For CH7007 */
+    {
+#ifdef WIN2000
+       if ( IsCH7007TVMode( pVBInfo ) )
+       {
+           TurnOnCH7007(pXGIHWDE->pDevice) ; /* 07/05/28 */
+       }
+#endif
+
+    }
+
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         if (!(XGI_XG27GetPSCValue( pVBInfo )&0x1))
+         {
+            XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+            XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+         }
+         if (!(XGI_XG27GetPSCValue( pVBInfo )&0x20))
+         {
+            XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+         }
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+         XGI_XG27BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+       }
+       else
+       {
+            XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+       }
+
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOff */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+    if ( pXGIHWDE->jChipType == XG21 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         XGI_XG21BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+       }
+       else
+       {
+            XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+       }
+    }
+
+    if (pVBInfo->IF_DEF_CH7007 == 1) /*[Billy] 07/05/23 For CH7007 */
+    {
+       /* if( IsCH7007TVMode( pVBInfo ) == 0 ) */
+       {
+#ifdef WIN2000
+         TurnOffCH7007(pXGIHWDE->pDevice) ;  /* 07/05/28 */
+#endif
+       }
+    }
+
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+       if ((XGI_XG27GetPSCValue( pVBInfo )&0x2))
+       {
+         XGI_XG27BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+       }
+
+       if ( pVBInfo->IF_DEF_LVDS == 0 )
+       {
+            XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+       }
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisply */
+/* Input : */
+/* Output : */
+/* Description : chiawen for sensecrt1 */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisply( PVB_DEVICE_INFO pVBInfo )
+{
+    while( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+        break ;
+
+    while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+        break ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseCRT1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR CRTCData[ 17 ] = { 0x5F , 0x4F , 0x50 , 0x82 , 0x55 , 0x81 ,
+                             0x0B , 0x3E , 0xE9 , 0x0B , 0xDF , 0xE7 ,
+                             0x04 , 0x00 , 0x00 , 0x05 , 0x00 } ;
+
+    UCHAR SR01 = 0 , SR1F = 0 , SR07 = 0 , SR06 = 0 ;
+
+    UCHAR CR17 , CR63 , SR31 ;
+    USHORT temp ;
+    UCHAR DAC_TEST_PARMS[ 3 ] = { 0x0F , 0x0F , 0x0F } ;
+
+    int i ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+    /* [2004/05/06] Vicent to fix XG42 single LCD sense to CRT+LCD */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) | 0x02 ) ) ;
+
+    SR31 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) ;
+    CR63 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+    SR01 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , ( UCHAR )( SR01 & 0xDF ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , ( UCHAR )( CR63 & 0xBF ) ) ;
+
+    CR17 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , ( UCHAR )( CR17 | 0x80 ) ) ;
+
+    SR1F = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR )( SR1F | 0x04 ) ) ;
+
+    SR07 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x07 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , ( UCHAR )( SR07 & 0xFB ) ) ;
+    SR06 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x06 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x06 , ( UCHAR )( SR06 & 0xC3 ) ) ;
+
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , 0x00 ) ;
+
+    for( i = 0 ; i < 8 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )i , CRTCData[ i ] ) ;
+
+    for( i = 8 ; i < 11 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 8 ) , CRTCData[ i ] ) ;
+
+    for( i = 11 ; i < 13 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 4 ) , CRTCData[ i ] ) ;
+
+    for( i = 13 ; i < 16 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , ( USHORT )( i - 3 ) , CRTCData[ i ] ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , ( UCHAR )( CRTCData[ 16 ] & 0xE0 ) ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE1 ) ;
+
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < 256 ; i++ )
+    {
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 0 ] ) ;
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 1 ] ) ;
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 2 ] ) ;
+    }
+
+    XGI_VBLongWait( pVBInfo ) ;
+    XGI_VBLongWait( pVBInfo ) ;
+    XGI_VBLongWait( pVBInfo ) ;
+
+    XGINew_LCD_Wait_Time( 0x01 , pVBInfo ) ;
+
+    XGI_WaitDisply( pVBInfo ) ;
+    temp = XGINew_GetReg2( pVBInfo->P3c2 ) ;
+
+    if( temp & 0x10 )
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x20 ) ;
+    }
+    else
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x00 ) ;
+    }
+
+    /* alan, avoid display something, set BLACK DAC if not restore DAC */
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < 256 ; i++ )
+    {
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , SR01 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , CR63 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , SR31 ) ;
+
+    /* [2004/05/11] Vicent */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) & 0xFD ) ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR ) SR1F ) ;
+}
+
+
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : INT1AReturnCode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int INT1AReturnCode( union REGS regs )
+{
+    if ( regs.x.cflag )
+    {
+        /* printf( "Error to find pci device!\n" ) ; */
+        return( 1 ) ;
+    }
+
+    switch(regs.h.ah)
+    {
+        case 0: return 0;
+            break ;
+        case 0x81:
+            printf( "Function not support\n" ) ;
+            break ;
+        case 0x83:
+            printf( "bad vendor id\n" ) ;
+            break ;
+        case 0x86:
+            printf( "device not found\n" ) ;
+            break ;
+        case 0x87:
+            printf( "bad register number\n" ) ;
+            break ;
+        case 0x88:
+            printf( "set failed\n" ) ;
+            break ;
+        case 0x89:
+            printf( "buffer too small" ) ;
+            break ;
+        default:
+            break ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : FindPCIIOBase */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+unsigned FindPCIIOBase( unsigned index , unsigned deviceid )
+{
+    union REGS regs ;
+
+    regs.h.ah = 0xb1 ;	/* PCI_FUNCTION_ID */
+    regs.h.al = 0x02 ;	/* FIND_PCI_DEVICE */
+    regs.x.cx = deviceid ;
+    regs.x.dx = 0x1039 ;
+    regs.x.si = index ;	/* find n-th device */
+
+    int86( 0x1A , &regs , &regs ) ;
+
+    if ( INT1AReturnCode( regs ) != 0 )
+        return( 0 ) ;
+
+    /* regs.h.bh bus number */
+    /* regs.h.bl device number */
+    regs.h.ah = 0xb1 ;  /* PCI_FUNCTION_ID */
+    regs.h.al = 0x09 ;  /* READ_CONFIG_WORD */
+    regs.x.cx = deviceid ;
+    regs.x.dx = 0x1039 ;
+    regs.x.di = 0x18 ;  /* register number */
+    int86( 0x1A , &regs , &regs ) ;
+
+    if ( INT1AReturnCode( regs ) != 0 )
+        return( 0 ) ;
+
+    return( regs.x.cx ) ;
+}
+
+#endif
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : main */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void main(int argc, char *argv[])
+{
+    XGI_HW_DEVICE_INFO HwDeviceExtension ;
+    USHORT temp ;
+    USHORT ModeNo ;
+
+    /* HwDeviceExtension.pjVirtualRomBase =(PUCHAR) MK_FP(0xC000,0); */
+    /* HwDeviceExtension.pjVideoMemoryAddress = (PUCHAR)MK_FP(0xA000,0); */
+
+
+    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 ,0x6300 ) & 0xFF80 ) + 0x30 ;
+    HwDeviceExtension.jChipType = XGI_340 ;
+
+
+
+    /* HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x5315 ) & 0xFF80 ) + 0x30 ; */
+
+    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x330 ) & 0xFF80 ) + 0x30 ;
+    HwDeviceExtension.jChipType = XGI_340 ;
+
+
+    HwDeviceExtension.ujVBChipID = VB_CHIP_301 ;
+    StrCpy(HwDeviceExtension.szVBIOSVer , "0.84" ) ;
+    HwDeviceExtension.bSkipDramSizing = FALSE ;
+    HwDeviceExtension.ulVideoMemorySize = 0 ;
+
+    if ( argc == 2 )
+    {
+        ModeNo = atoi( argv[ 1 ] ) ;
+    }
+    else
+    {
+        ModeNo = 0x2e ;
+        /* ModeNo = 0x37 ; 1024x768x 4bpp */
+        /* ModeNo = 0x38 ; 1024x768x 8bpp */
+        /* ModeNo = 0x4A ; 1024x768x 16bpp */
+        /* ModeNo = 0x47 ; 800x600x 16bpp */
+    }
+
+    /* XGIInitNew( &HwDeviceExtension ) ; */
+    XGISetModeNew( &HwDeviceExtension , ModeNo ) ;
+}
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisplay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisplay( PVB_DEVICE_INFO pVBInfo )
+{
+    while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ) ;
+
+    while( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Group301 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SetCRT2Group301( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ,
+           ModeIdIndex ,
+           RefreshRateTableIndex ;
+
+    tempbx=pVBInfo->VBInfo ;
+    pVBInfo->SetFlag |= ProgrammingCRT2 ;
+    XGI_SearchModeID( ModeNo , &ModeIdIndex,  pVBInfo ) ;
+    pVBInfo->SelectCRT2Rate = 4 ;
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_SaveCRT2Info( ModeNo, pVBInfo ) ;
+    XGI_GetCRT2ResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+    XGI_GetCRT2Data( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_PreSetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetLockRegs( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup2(  ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetLCDRegs(ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetTap4Regs(pVBInfo) ;
+    XGI_SetGroup3(ModeNo, ModeIdIndex, pVBInfo);
+    XGI_SetGroup4( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup5( ModeNo , ModeIdIndex, pVBInfo) ;
+    XGI_AutoThreshold( pVBInfo) ;
+    return 1 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AutoThreshold */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_AutoThreshold(  PVB_DEVICE_INFO pVBInfo )
+{
+    if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+      XGINew_SetRegOR( pVBInfo->Part1Port , 0x01 , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SaveCRT2Info */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SaveCRT2Info( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp1 ,
+           temp2 ;
+
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , ModeNo ) ;  /* reserve CR34 for CRT1 Mode No */
+    temp1 = ( pVBInfo->VBInfo&SetInSlaveMode ) >> 8 ;
+    temp2 = ~( SetInSlaveMode >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , temp2 , temp1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2ResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2ResInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+     /* modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			/* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			/* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ;		/* si+St_ModeFlag */
+
+/*        if ( pVBInfo->IF_DEF_FSTN )
+        {
+            xres *= 2 ;
+            yres *= 2 ;
+        }
+        else
+        {
+*/
+            if ( modeflag & HalfDCLK )
+                xres *= 2;
+
+            if ( modeflag & DoubleScanMode )
+                yres *= 2 ;
+/* } */
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+    {
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+            {
+                if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+                {
+                    if ( yres == 1024 )
+                        yres = 1056 ;
+	        }
+            }
+
+            if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+            {
+	        if ( yres == 400 )
+	            yres = 405 ;
+	        else if ( yres == 350 )
+	            yres = 360 ;
+
+	        if ( pVBInfo->LCDInfo & LCDVESATiming )
+	        {
+	            if ( yres == 360 )
+	                yres = 375 ;
+	        }
+            }
+
+            if ( pVBInfo->LCDResInfo == Panel1024x768 )
+            {
+	        if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+	        {
+	            if ( !( pVBInfo->LCDInfo & LCDNonExpanding ) )
+	            {
+	                if ( yres == 350 )
+	                    yres = 357 ;
+	                else if ( yres == 400 )
+	                    yres = 420 ;
+	                else if ( yres == 480 )
+	                    yres = 525 ;
+	            }
+                }
+            }
+        }
+
+        if ( xres == 720 )
+            xres = 640 ;
+    }
+
+    pVBInfo->VGAHDE = xres ;
+    pVBInfo->HDE = xres ;
+    pVBInfo->VGAVDE = yres ;
+    pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDDualLink */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDDualLink( PVB_DEVICE_INFO pVBInfo )
+{
+
+    if ( ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) ) && ( pVBInfo->LCDInfo & SetLCDDualLink ) ) /* shampoo0129 */
+        return ( 1 ) ;
+
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2Data */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax = 0,
+           tempbx ,
+           modeflag ,
+           resinfo ;
+
+    XGI_LCDDataStruct *LCDPtr = NULL ;
+    XGI_TVDataStruct  *TVPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;     /* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    pVBInfo->NewFlickerMode = 0 ;
+    pVBInfo->RVBHRS = 50 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+    {
+        XGI_GetRAMDAC2DATA( ModeNo , ModeIdIndex , RefreshRateTableIndex,pVBInfo ) ;
+        return ;
+    }
+
+    tempbx = 4 ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        LCDPtr = (XGI_LCDDataStruct* )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+        pVBInfo->RVBHCMAX = LCDPtr->RVBHCMAX ;
+        pVBInfo->RVBHCFACT = LCDPtr->RVBHCFACT ;
+        pVBInfo->VGAHT = LCDPtr->VGAHT ;
+        pVBInfo->VGAVT = LCDPtr->VGAVT ;
+        pVBInfo->HT = LCDPtr->LCDHT ;
+        pVBInfo->VT = LCDPtr->LCDVT ;
+
+        if ( pVBInfo->LCDResInfo == Panel1024x768 )
+        {
+            tempax = 1024 ;
+            tempbx = 768 ;
+
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+                if ( pVBInfo->VGAVDE == 357 )
+                    tempbx = 527 ;
+	        else if ( pVBInfo->VGAVDE == 420 )
+	            tempbx = 620 ;
+	        else if ( pVBInfo->VGAVDE == 525 )
+	            tempbx = 775 ;
+	        else if ( pVBInfo->VGAVDE == 600 )
+	            tempbx = 775 ;
+                /* else if(pVBInfo->VGAVDE==350) tempbx=560; */
+                /* else if(pVBInfo->VGAVDE==400) tempbx=640; */
+	        else
+	          tempbx = 768 ;
+            }
+            else
+                tempbx = 768 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1024x768x75 )
+        {
+            tempax = 1024 ;
+            tempbx = 768 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+        {
+            tempax = 1280 ;
+            if ( pVBInfo->VGAVDE == 360 )
+                tempbx = 768 ;
+            else if ( pVBInfo->VGAVDE == 375 )
+                tempbx = 800 ;
+            else if ( pVBInfo->VGAVDE == 405 )
+                tempbx = 864 ;
+            else
+                tempbx = 1024 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x1024x75 )
+        {
+            tempax = 1280 ;
+            tempbx = 1024 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x960 )
+        {
+            tempax = 1280 ;
+            if ( pVBInfo->VGAVDE == 350 )
+                tempbx = 700 ;
+            else if ( pVBInfo->VGAVDE == 400 )
+                tempbx = 800 ;
+            else if ( pVBInfo->VGAVDE == 1024 )
+                tempbx = 960 ;
+            else
+                tempbx = 960 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+        {
+            tempax = 1400 ;
+            tempbx = 1050 ;
+
+            if ( pVBInfo->VGAVDE == 1024 )
+            {
+                tempax = 1280 ;
+                tempbx = 1024 ;
+            }
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+        {
+            tempax = 1600 ;
+            tempbx = 1200 ;  /* alan 10/14/2003 */
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+              if ( pVBInfo->VGAVDE == 350 )
+                tempbx = 875 ;
+              else if ( pVBInfo->VGAVDE == 400 )
+                tempbx = 1000 ;
+            }
+        }
+
+        if ( pVBInfo->LCDInfo & LCDNonExpanding )
+        {
+            tempax = pVBInfo->VGAHDE ;
+            tempbx = pVBInfo->VGAVDE ;
+        }
+
+        pVBInfo->HDE = tempax ;
+        pVBInfo->VDE = tempbx ;
+        return ;
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToTV ) )
+    {
+        tempbx = 4 ;
+        TVPtr = ( XGI_TVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+        pVBInfo->RVBHCMAX = TVPtr->RVBHCMAX ;
+        pVBInfo->RVBHCFACT = TVPtr->RVBHCFACT ;
+        pVBInfo->VGAHT = TVPtr->VGAHT ;
+        pVBInfo->VGAVT = TVPtr->VGAVT ;
+        pVBInfo->HDE = TVPtr->TVHDE ;
+        pVBInfo->VDE = TVPtr->TVVDE ;
+        pVBInfo->RVBHRS = TVPtr->RVBHRS ;
+        pVBInfo->NewFlickerMode = TVPtr->FlickerMode ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {
+            if ( resinfo == 0x08 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+            else if ( resinfo == 0x09 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+            else if ( resinfo == 0x12 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+
+            if ( pVBInfo->VGAVDE == 350 )
+                pVBInfo->TVInfo |= TVSimuMode ;
+
+            tempax = ExtHiTVHT ;
+            tempbx = ExtHiTVVT ;
+
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+	        if ( pVBInfo->TVInfo & TVSimuMode )
+	        {
+	            tempax = StHiTVHT ;
+	            tempbx = StHiTVVT ;
+
+	            if ( !( modeflag & Charx8Dot ) )
+	            {
+	                tempax = StHiTextTVHT ;
+	                tempbx = StHiTextTVVT ;
+	            }
+	        }
+            }
+        }
+        else if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            {
+                tempax = YPbPrTV750pHT ;	/* Ext750pTVHT */
+                tempbx = YPbPrTV750pVT ;	/* Ext750pTVVT */
+            }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            {
+                tempax = YPbPrTV525pHT ;	/* Ext525pTVHT */
+                tempbx = YPbPrTV525pVT ;	/* Ext525pTVVT */
+            }
+            else if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            {
+                tempax = YPbPrTV525iHT ;	/* Ext525iTVHT */
+                tempbx = YPbPrTV525iVT ;	/* Ext525iTVVT */
+                if ( pVBInfo->TVInfo & NTSC1024x768 )
+                    tempax = NTSC1024x768HT ;
+            }
+        }
+        else
+        {
+            tempax = PALHT ;
+            tempbx = PALVT ;
+            if ( !( pVBInfo->TVInfo & SetPALTV ) )
+            {
+                tempax = NTSCHT ;
+	        tempbx = NTSCVT ;
+	        if ( pVBInfo->TVInfo & NTSC1024x768 )
+	            tempax = NTSC1024x768HT ;
+            }
+        }
+
+        pVBInfo->HT = tempax ;
+        pVBInfo->VT = tempbx ;
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2VCLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR di_0 ,
+          di_1 ,
+          tempal ;
+
+    tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetVCLKLen( tempal, &di_0 , &di_1, pVBInfo ) ;
+    XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+    if ( pVBInfo->VBType & VB_XGI301 ) /* shampoo 0129 */
+    {				/* 301 */
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , 0x10 ) ;
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0B , di_1 ) ;
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , di_0 ) ;
+    }
+    else
+    {				/* 301b/302b/301lv/302lv */
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0A , di_0 ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0B , di_1 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x00 , 0x12 ) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x28 ) ;
+    else
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x08 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GETLCDVCLKPtr */
+/* Input : */
+/* Output : al -> VCLK Index */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDVCLKPtr( UCHAR* di_0 , UCHAR *di_1, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        if ( pVBInfo->IF_DEF_ScaleLCD == 1 )
+        {
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                return ;
+        }
+
+        /* index = XGI_GetLCDCapPtr(pVBInfo) ; */
+        index = XGI_GetLCDCapPtr1( pVBInfo) ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {	/* LCDB */
+            *di_0 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData1 ;
+            *di_1 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData2 ;
+        }
+        else
+        {	/* LCDA */
+            *di_0 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData1 ;
+            *di_1 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData2 ;
+        }
+    }
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+
+    USHORT index ,
+           modeflag ;
+#ifndef LINUX_XF86
+    USHORT tempbx ;
+#endif
+
+    UCHAR tempal ;
+    UCHAR *CHTVVCLKPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+    else
+        modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;    /* si+Ext_ResInfo */
+
+
+    if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) )
+    {   /* {LCDA/LCDB} */
+        index = XGI_GetLCDCapPtr(pVBInfo) ;
+        tempal = pVBInfo->LCDCapList[ index ].LCD_VCLK ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            return tempal ;
+
+	/* {TV} */
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV| VB_XGI302LV| VB_XGI301C ) )
+        {
+            if(pVBInfo->VBInfo&SetCRT2ToHiVisionTV)
+           {
+                tempal = HiTVVCLKDIV2;
+                if(!(pVBInfo->TVInfo & RPLLDIV2XO))
+                    tempal = HiTVVCLK;
+	        if(pVBInfo->TVInfo & TVSimuMode)
+                {
+                    tempal = HiTVSimuVCLK;
+                    if(!(modeflag & Charx8Dot))
+              	        tempal = HiTVTextVCLK;
+
+                 }
+                 return tempal;
+             }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            {
+                tempal = YPbPr750pVCLK ;
+                return tempal ;
+            }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            {
+                tempal = YPbPr525pVCLK ;
+                return tempal ;
+            }
+
+            tempal = NTSC1024VCLK ;
+
+            if ( !( pVBInfo->TVInfo & NTSC1024x768 ) )
+            {
+                tempal = TVVCLKDIV2 ;
+                if ( !( pVBInfo->TVInfo & RPLLDIV2XO ) )
+                    tempal = TVVCLK ;
+            }
+
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                return tempal ;
+        }
+        /*else
+        if((pVBInfo->IF_DEF_CH7017==1)&&(pVBInfo->VBType&VB_CH7017))
+        {
+            if(ModeNo<=0x13)
+                *tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
+            else
+                *tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+            *tempal = *tempal & 0x1F;
+
+            tempbx = 0;
+            if(pVBInfo->TVInfo & SetPALTV)
+                tempbx = tempbx + 2;
+            if(pVBInfo->TVInfo & SetCHTVOverScan)
+                tempbx++;
+            tempbx = tempbx << 1;
+        }  */
+    }	/* {End of VB} */
+
+    if((pVBInfo->IF_DEF_CH7007==1)&&(pVBInfo->VBType&VB_CH7007)) /* [Billy] 07/05/08 CH7007 */
+    {
+       /* VideoDebugPrint((0, "XGI_GetVCLKPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+       if ( (pVBInfo->VBInfo & SetCRT2ToTV) )
+       {
+           if( ModeNo <= 0x13 )
+           {
+              tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+           }
+           else
+           {
+              tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+           }
+
+           tempal = tempal & 0x0F;
+           tempbx = 0;
+
+           if(pVBInfo->TVInfo & SetPALTV)
+           {
+              tempbx = tempbx + 2;
+           }
+           if(pVBInfo->TVInfo & SetCHTVOverScan)
+           {
+              tempbx++;
+           }
+           /** tempbx = tempbx << 1; CH7007 ? **/
+
+/*[Billy]07/05/29 CH7007*/
+           if ( pVBInfo->IF_DEF_CH7007 == 1 )
+           {
+             switch( tempbx )
+             {
+               case 0:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKUNTSC ;
+                   break ;
+               case 1:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKONTSC ;
+                   break ;
+               case 2:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKUPAL ;
+                   break ;
+               case 3:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKOPAL ;
+                   break ;
+               default:
+                   break ;
+
+             }
+           }
+           /*else
+           {
+            switch( tempbx )
+            {
+               case 0:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+                   break ;
+               case 1:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+                   break ;
+               case 2:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+                   break ;
+               case 3:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+                   break ;
+               default:
+                   break ;
+            }
+           }*/
+
+           tempal = CHTVVCLKPtr[ tempal ] ;
+           return tempal ;
+       }
+
+    }
+
+    tempal = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;
+    tempal = tempal >> 2 ;
+    tempal &= 0x03 ;
+
+    if ( ( pVBInfo->LCDInfo & EnableScalingLCD ) && ( modeflag & Charx8Dot ) )  /* for Dot8 Scaling LCD */
+        tempal = tempal ^ tempal ;                   /* ; set to VCLK25MHz always */
+
+    if ( ModeNo <= 0x13 )
+        return tempal ;
+
+    tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+    return tempal ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKLen */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 2007/05/16 */
+    {
+       /* VideoDebugPrint((0, "XGI_GetVCLKLen: pVBInfo->IF_DEF_CH7007==1\n")); */
+        *di_0 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2B ;
+        *di_1 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2C ;
+    }
+    else if ( pVBInfo->VBType & ( VB_XGI301 | VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+        {
+            *di_0 = ( UCHAR )XGI_VBVCLKData[ tempal ].SR2B ;
+            *di_1 = XGI_VBVCLKData[ tempal ].SR2C ;
+        }
+    }
+    else
+    {
+        *di_0 = XGI_VCLKData[ tempal ].SR2B ;
+        *di_1 = XGI_VCLKData[ tempal ].SR2C ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2Offset( USHORT ModeNo ,
+				   USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT offset ;
+    UCHAR temp ;
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+    {
+        return ;
+    }
+
+    offset = XGI_GetOffset(  ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    temp = ( UCHAR )( offset & 0xFF ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;
+    temp =( UCHAR)( ( offset & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , temp ) ;
+    temp =( UCHAR )( ( ( offset >> 3 ) & 0xFF ) + 1 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetOffset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ,
+           colordepth ,
+           modeinfo ,
+           index ,
+           infoflag ,
+           ColorDepth[] = { 0x01 , 0x02 , 0x04 } ;
+
+    modeinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+    if ( ModeNo <= 0x14 )
+        infoflag = 0 ;
+    else
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+
+    index = ( modeinfo >> 8 ) & 0xFF ;
+
+    temp = pVBInfo->ScreenOffset[ index ] ;
+
+    if ( infoflag & InterlaceMode )
+    {
+        temp = temp << 1 ;
+    }
+
+    colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( ( ModeNo >= 0x7C ) && ( ModeNo <= 0x7E ) )
+    {
+        temp = ModeNo - 0x7C ;
+	colordepth = ColorDepth[ temp ] ;
+	temp = 0x6B ;
+	if ( infoflag & InterlaceMode )
+	{
+            temp = temp << 1 ;
+	}
+	return( temp * colordepth ) ;
+    }
+    else
+        return( temp * colordepth ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2FIFO( PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x01 , 0x3B ) ;			/* threshold high ,disable auto threshold */
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x02 , ~( 0x3F ) , 0x04 ) ;	/* threshold low default 04h */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_PreSetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_PreSetGroup1(USHORT ModeNo , USHORT ModeIdIndex ,PXGI_HW_DEVICE_INFO HwDeviceExtension,
+                       USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempcx = 0 ,
+           CRT1Index = 0 ,
+           resinfo = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    XGI_SetCRT2Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetCRT2FIFO(pVBInfo) ;
+    /* XGI_SetCRT2Sync(ModeNo,RefreshRateTableIndex); */
+
+    for( tempcx = 4 ; tempcx < 7 ; tempcx++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part1Port , tempcx , 0x0 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x50 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , 0x44 ) ;	/* temp 0206 */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup1( USHORT ModeNo , USHORT ModeIdIndex ,
+                            PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp = 0 ,
+           tempax = 0 ,
+           tempbx = 0 ,
+           tempcx = 0 ,
+           pushbx = 0 ,
+           CRT1Index = 0 ,
+           modeflag ,
+           resinfo = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    /* bainy change table name */
+    if ( modeflag & HalfDCLK )
+    {
+        temp = ( pVBInfo->VGAHT / 2 - 1 ) & 0x0FF ;			/* BTVGA2HT 0x08,0x09 */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+        temp = ( ( ( pVBInfo->VGAHT / 2 - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+        temp = ( pVBInfo->VGAHDE / 2 + 16 ) & 0x0FF ;			/* BTVGA2HDEE 0x0A,0x0C */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+        tempcx = ( ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) / 2 ) >> 2 ;
+        pushbx = pVBInfo->VGAHDE / 2 + 16 ;
+        tempcx = tempcx >> 1 ;
+        tempbx = pushbx + tempcx ;					/* bx BTVGA@HRS 0x0B,0x0C */
+        tempcx += tempbx ;
+
+  	if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+  	{
+            tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+            tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] & 0xC0 ) << 2 ) ;
+            tempbx = ( tempbx - 3 ) << 3 ;				/* (VGAHRS-3)*8 */
+            tempcx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[ 5 ] ;
+            tempcx &= 0x1F ;
+            temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 15 ] ;
+            temp = ( temp & 0x04 ) << ( 5 - 2 ) ;			/* VGAHRE D[5] */
+            tempcx = ( ( tempcx | temp ) - 3 ) << 3 ;			/* (VGAHRE-3)*8 */
+        }
+
+        tempbx += 4 ;
+        tempcx += 4 ;
+
+        if ( tempcx > ( pVBInfo->VGAHT / 2 ) )
+            tempcx = pVBInfo->VGAHT / 2 ;
+
+        temp = tempbx & 0x00FF ;
+
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+    }
+    else
+    {
+        temp = ( pVBInfo->VGAHT - 1 ) & 0x0FF ;				/* BTVGA2HT 0x08,0x09 */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+        temp = ( ( ( pVBInfo->VGAHT - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+        temp = ( pVBInfo->VGAHDE + 16 ) & 0x0FF ;				/* BTVGA2HDEE 0x0A,0x0C */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+        tempcx = ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) >> 2 ;		/* cx */
+        pushbx = pVBInfo->VGAHDE + 16 ;
+        tempcx = tempcx >> 1 ;
+        tempbx = pushbx + tempcx ;					/* bx BTVGA@HRS 0x0B,0x0C */
+        tempcx += tempbx ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        {
+            tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 3 ] ;
+            tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] & 0xC0 ) << 2 ) ;
+            tempbx = ( tempbx - 3 ) << 3 ;				/* (VGAHRS-3)*8 */
+            tempcx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+            tempcx &= 0x1F ;
+            temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 6 ] ;
+            temp = ( temp & 0x04 ) << ( 5 - 2 ) ;			/* VGAHRE D[5] */
+            tempcx = ( ( tempcx | temp ) - 3 ) << 3 ;			/* (VGAHRE-3)*8 */
+            tempbx += 16 ;
+            tempcx += 16 ;
+        }
+
+        if ( tempcx > pVBInfo->VGAHT )
+            tempcx = pVBInfo->VGAHT ;
+
+        temp = tempbx & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+    }
+
+    tempax = ( tempax & 0x00FF ) | ( tempbx & 0xFF00 ) ;
+    tempbx = pushbx ;
+    tempbx = ( tempbx & 0x00FF ) | ( ( tempbx & 0xFF00 ) << 4 ) ;
+    tempax |= ( tempbx & 0xFF00 ) ;
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ;
+    tempcx = ( pVBInfo->VGAVT - 1 ) ;
+    temp = tempcx & 0x00FF ;
+
+    if ( pVBInfo->IF_DEF_CH7005 == 1 )
+    {
+        if ( pVBInfo->VBInfo & 0x0C )
+        {
+            temp-- ;
+	}
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+    tempbx = pVBInfo->VGAVDE - 1 ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) << 3 ) >> 8 ;
+    temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , temp ) ;
+
+    tempax = pVBInfo->VGAVDE ;
+    tempbx = pVBInfo->VGAVDE ;
+    tempcx = pVBInfo->VGAVT ;
+    tempbx = ( pVBInfo->VGAVT + pVBInfo->VGAVDE ) >> 1 ;				/* BTVGA2VRS 0x10,0x11 */
+    tempcx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) >> 4 ) + tempbx + 1 ;		/* BTVGA2VRE 0x11 */
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+    {
+        tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 10 ] ;
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+
+        if ( temp & 0x04 )
+            tempbx |= 0x0100 ;
+
+        if ( temp & 0x080 )
+            tempbx |= 0x0200 ;
+
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] ;
+
+        if ( temp & 0x08 )
+            tempbx |= 0x0400 ;
+
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 11 ] ;
+        tempcx = ( tempcx & 0xFF00 ) | ( temp & 0x00FF ) ;
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+    temp = ( ( tempcx & 0x000F ) | ( temp ) ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , temp ) ;
+    tempax = 0 ;
+
+    if ( modeflag & DoubleScanMode )
+        tempax |= 0x80 ;
+
+    if ( modeflag & HalfDCLK )
+        tempax |= 0x40 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2C , ~0x0C0 , tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLockRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void  XGI_SetLockRegs( USHORT ModeNo , USHORT ModeIdIndex ,
+                                PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT push1 ,
+           push2 ,
+           tempax ,
+           tempbx = 0 ,
+           tempcx ,
+           temp ,
+           resinfo ,
+           modeflag ,
+           CRT1Index ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask;
+    }
+
+    if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+    {
+        return ;
+    }
+
+    temp = 0xFF ;							/* set MAX HT */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+    /* if ( modeflag & Charx8Dot ) tempcx = 0x08 ; */
+    /* else */
+    tempcx=0x08;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        modeflag |= Charx8Dot ;
+
+    tempax = pVBInfo->VGAHDE ;						/* 0x04 Horizontal Display End */
+
+    if ( modeflag & HalfDCLK )
+        tempax = tempax >> 1 ;
+
+    tempax = ( tempax / tempcx ) - 1 ;
+    tempbx |= ( ( tempax & 0x00FF ) << 8 ) ;
+    temp = tempax & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x04 , temp ) ;
+
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+            temp += 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {
+            if ( pVBInfo->VBType & VB_XGI301LV )
+            {
+                if ( pVBInfo->VBExtInfo == VB_YPbPr1080i )
+                {
+                    if ( resinfo == 7 )
+                        temp -= 2 ;
+                }
+            }
+            else
+                if ( resinfo == 7 )
+                    temp -= 2 ;
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x05 , temp ) ;			/* 0x05 Horizontal Display Start */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x06 , 0x03 ) ;			/* 0x06 Horizontal Blank end */
+
+    if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+    {                            					/* 030226 bainy */
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            tempax = pVBInfo->VGAHT ;
+        else
+            tempax = XGI_GetVGAHT2( pVBInfo) ;
+    }
+
+    if ( tempax >= pVBInfo->VGAHT )
+    {
+        tempax = pVBInfo->VGAHT ;
+    }
+
+    if ( modeflag & HalfDCLK )
+    {
+        tempax = tempax >> 1 ;
+    }
+
+    tempax = ( tempax / tempcx ) - 5 ;
+    tempcx = tempax ;				/* 20030401 0x07 horizontal Retrace Start */
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        temp = ( tempbx & 0x00FF ) - 1 ;
+        if ( !( modeflag & HalfDCLK ) )
+        {
+            temp -= 6 ;
+            if ( pVBInfo->TVInfo & TVSimuMode )
+            {
+                temp -= 4 ;
+                if ( ModeNo > 0x13 )
+                    temp -= 10 ;
+            }
+        }
+    }
+    else
+    {
+        /* tempcx = tempbx & 0x00FF ; */
+        tempbx = ( tempbx & 0xFF00 ) >> 8 ;
+        tempcx = ( tempcx + tempbx ) >> 1 ;
+        temp = ( tempcx & 0x00FF ) + 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            temp -= 1 ;
+            if ( !( modeflag & HalfDCLK ) )
+            {
+                if ( ( modeflag & Charx8Dot ) )
+                {
+                    temp += 4 ;
+                    if ( pVBInfo->VGAHDE >= 800 )
+                    {
+                        temp -= 6 ;
+                    }
+                }
+            }
+        }
+        else
+        {
+            if ( !( modeflag & HalfDCLK ) )
+            {
+                temp -= 4 ;
+                if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                {
+                    if( pVBInfo->VGAHDE >= 800 )
+                    {
+                        temp -= 7 ;
+                        if ( pVBInfo->ModeType == ModeEGA )
+                        {
+                            if ( pVBInfo->VGAVDE == 1024 )
+                            {
+                                temp += 15 ;
+                                if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+                                {
+                                    temp += 7 ;
+                                }
+                            }
+                        }
+
+                        if ( pVBInfo->VGAHDE >= 1280 )
+                        {
+                            if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                            {
+                                if ( pVBInfo->LCDInfo & LCDNonExpanding )
+                                {
+                                    temp += 28 ;
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;		/* 0x07 Horizontal Retrace Start */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0 ) ;		/* 0x08 Horizontal Retrace End */
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( pVBInfo->TVInfo & TVSimuMode )
+        {
+            if ( ( ModeNo == 0x06 ) || ( ModeNo == 0x10 ) || ( ModeNo == 0x11 ) || ( ModeNo == 0x13 ) || ( ModeNo == 0x0F ) )
+            {
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x5b ) ;
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+            }
+
+            if ( ( ModeNo == 0x00 ) || ( ModeNo == 0x01 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x61 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x41 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+                }
+            }
+
+            if ( ( ModeNo == 0x02 ) || ( ModeNo == 0x03 ) || ( ModeNo == 0x07 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x54 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x55 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+                }
+            }
+
+            if ( ( ModeNo == 0x04 ) || ( ModeNo == 0x05 ) || ( ModeNo == 0x0D ) || ( ModeNo == 0x50 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x30 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2f ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x02 ) ;
+                }
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , 0x03 ) ;				/* 0x18 SR0B */
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0xF0 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , 0xFF ) ;				/* 0x09 Set Max VT */
+
+    tempbx = pVBInfo->VGAVT ;
+    push1 = tempbx ;
+    tempcx = 0x121 ;
+    tempbx = pVBInfo->VGAVDE ;							/* 0x0E Virtical Display End */
+
+    if ( tempbx == 357 )
+        tempbx = 350 ;
+    if ( tempbx == 360 )
+        tempbx =350 ;
+    if ( tempbx == 375 )
+        tempbx = 350 ;
+    if ( tempbx == 405 )
+        tempbx = 400 ;
+    if ( tempbx == 525 )
+        tempbx = 480 ;
+
+    push2 = tempbx ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+    {
+        if ( pVBInfo->LCDResInfo == Panel1024x768 )
+        {
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+                if ( tempbx == 350 )
+                    tempbx += 5 ;
+		if ( tempbx == 480 )
+		    tempbx += 5 ;
+            }
+        }
+    }
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 ,temp ) ;				/* 0x10 vertical Blank Start */
+    tempbx = push2 ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0002 ;
+    }
+
+    tempax = 0x000B ;
+
+    if ( modeflag & DoubleScanMode )
+    {
+        tempax |= 0x08000 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        tempcx |= 0x0040 ;
+    }
+
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+
+    if ( tempbx & 0x0400 )
+    {
+        tempcx |= 0x0600 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , 0x00 ) ;				/* 0x11 Vertival Blank End */
+
+    tempax = push1 ;
+    tempax -= tempbx ;								/* 0x0C Vertical Retrace Start */
+    tempax = tempax >> 2 ;
+    push1 = tempax ;								/* push ax */
+
+    if ( resinfo != 0x09 )
+    {
+        tempax = tempax << 1 ;
+        tempbx += tempax ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+                tempbx -= 10 ;
+            else
+            {
+                if ( pVBInfo->TVInfo & TVSimuMode )
+                {
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                    {
+                        if ( pVBInfo->VBType & VB_XGI301LV )
+                        {
+                            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                                tempbx += 40 ;
+                        }
+                        else
+                            tempbx += 40 ;
+                    }
+                }
+            }
+        }
+        else
+            tempbx -= 10 ;
+    }
+    else
+    {
+        if ( pVBInfo->TVInfo & TVSimuMode )
+        {
+            if ( pVBInfo->TVInfo & SetPALTV )
+            {
+                if ( pVBInfo->VBType & VB_XGI301LV )
+                {
+                    if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                        tempbx += 40 ;
+                }
+                else
+                    tempbx += 40 ;
+            }
+        }
+    }
+    tempax = push1 ;
+    tempax = tempax >> 2 ;
+    tempax++ ;
+    tempax += tempbx ;
+    push1 = tempax ;						/* push ax */
+
+    if ( ( pVBInfo->TVInfo & SetPALTV ) )
+    {
+        if ( tempbx <= 513 )
+        {
+            if ( tempax >= 513 )
+            {
+                tempbx = 513 ;
+            }
+        }
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0008 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x0B , 0x0FF , 0x20 ) ;
+    }
+
+    tempbx++ ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0004 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        tempcx |= 0x0080 ;
+    }
+
+    if ( tempbx & 0x0400 )
+    {
+        tempcx |= 0x0C00 ;
+    }
+
+    tempbx = push1 ;						/* pop ax */
+    temp = tempbx & 0x00FF ;
+    temp &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ;		/* 0x0D vertical Retrace End */
+
+    if ( tempbx & 0x0010 )
+    {
+        tempcx |= 0x2000 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;		/* 0x0A CR07 */
+    temp = ( tempcx & 0x0FF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , temp ) ;		/* 0x17 SR0A */
+    tempax = modeflag ;
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+
+    temp = ( temp >> 1 ) & 0x09 ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        temp |= 0x01 ;
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , temp ) ;			/* 0x16 SR01 */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , 0 ) ;			/* 0x0F CR14 */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , 0 ) ;			/* 0x12 CR17 */
+
+    if ( pVBInfo->LCDInfo & LCDRGB18Bit )
+        temp = 0x80 ;
+    else
+        temp = 0x00 ;
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , temp ) ;			/* 0x1A SR0E */
+
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex,
+                    PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i ,
+           j ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           push1 ,
+           push2 ,
+           modeflag ,
+           resinfo ,
+           crt2crtc ;
+    UCHAR *TimingPoint ;
+
+    ULONG longtemp ,
+          tempeax ,
+          tempebx ,
+          temp2 ,
+          tempecx ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;		/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+        crt2crtc = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;		/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        crt2crtc = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempax = 0 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToAVIDEO ) )
+        tempax |= 0x0800 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+        tempax |= 0x0400 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+        tempax |= 0x0200 ;
+
+    if ( !( pVBInfo->TVInfo & SetPALTV ) )
+        tempax |= 0x1000 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        tempax |= 0x0100 ;
+
+    if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+        tempax &= 0xfe00 ;
+
+    tempax = ( tempax & 0xff00 ) >> 8 ;
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x0 , tempax ) ;
+    TimingPoint = pVBInfo->NTSCTiming ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+    {
+        TimingPoint = pVBInfo->PALTiming ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        TimingPoint = pVBInfo->HiTVExtTiming ;
+
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+            TimingPoint = pVBInfo->HiTVSt2Timing ;
+
+        if ( pVBInfo->SetFlag & TVSimuMode )
+            TimingPoint = pVBInfo->HiTVSt1Timing ;
+
+        if ( !(modeflag & Charx8Dot) )
+            TimingPoint = pVBInfo->HiTVTextTiming ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            TimingPoint = pVBInfo->YPbPr525iTiming ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+    	    TimingPoint = pVBInfo->YPbPr525pTiming ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+    	    TimingPoint = pVBInfo->YPbPr750pTiming ;
+    }
+
+    for( i = 0x01 , j = 0 ; i <= 0x2D ; i++ , j++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+    }
+
+    for( i = 0x39 ; i <= 0x45 ; i++ , j++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;	/* di->temp2[j] */
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , 0x00 ) ;
+    }
+
+    temp = pVBInfo->NewFlickerMode ;
+    temp &= 0x80 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xFF , temp ) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        tempax = 950 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        tempax = 520 ;
+    else
+        tempax = 440 ;
+
+    if ( pVBInfo->VDE <= tempax )
+    {
+        tempax -= pVBInfo->VDE ;
+        tempax = tempax >> 2 ;
+        tempax = ( tempax & 0x00FF ) | ( ( tempax & 0x00FF ) << 8 ) ;
+        push1 = tempax ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp += ( USHORT )TimingPoint[ 0 ] ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) )
+            {
+                tempcx=pVBInfo->VGAHDE;
+                if ( tempcx >= 1024 )
+                {
+                    temp = 0x17 ;		/* NTSC */
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                        temp = 0x19 ;		/* PAL */
+                }
+            }
+        }
+
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+        tempax = push1 ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp += TimingPoint[ 1 ] ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) ) )
+            {
+                tempcx = pVBInfo->VGAHDE ;
+                if ( tempcx >= 1024 )
+                {
+                    temp = 0x1D ;		/* NTSC */
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                        temp = 0x52 ;		/* PAL */
+                }
+            }
+        }
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , temp ) ;
+    }
+
+    /* 301b */
+    tempcx = pVBInfo->HT ;
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempcx = tempcx >> 1 ;
+
+    tempcx -= 2 ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1B , temp ) ;
+
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F , temp ) ;
+
+    tempcx = pVBInfo->HT >> 1 ;
+    push1 = tempcx ;				/* push cx */
+    tempcx += 7 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempcx -= 4 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x22 , 0x0F , temp ) ;
+
+    tempbx = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+    tempbx += tempcx ;
+    push2 = tempbx ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x24 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR(pVBInfo->Part2Port,0x25,0x0F,temp);
+
+    tempbx=push2;
+    tempbx=tempbx+8;
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempbx=tempbx-4;
+        tempcx=tempbx;
+    }
+
+    temp = ( tempbx & 0x00FF ) << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x29 , 0x0F , temp ) ;
+
+    j += 2 ;
+    tempcx += ( TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x27 , temp ) ;
+    temp = ( ( tempcx & 0xFF00 ) >> 8 ) << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x28 , 0x0F , temp ) ;
+
+    tempcx += 8 ;
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempcx -= 4 ;
+    }
+
+    temp = tempcx & 0xFF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2A , 0x0F , temp ) ;
+
+    tempcx = push1 ;					/* pop cx */
+    j += 2 ;
+    temp = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+    tempcx -= temp ;
+    temp = tempcx & 0x00FF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2D , 0x0F ,temp ) ;
+
+    tempcx -= 11 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        tempax = XGI_GetVGAHT2( pVBInfo) ;
+        tempcx = tempax - 1 ;
+    }
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2E , temp ) ;
+
+    tempbx = pVBInfo->VDE ;
+
+    if ( pVBInfo->VGAVDE == 360 )
+        tempbx = 746 ;
+    if ( pVBInfo->VGAVDE == 375 )
+        tempbx = 746 ;
+    if ( pVBInfo->VGAVDE == 405 )
+        tempbx = 853 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+                tempbx = tempbx >> 1 ;
+        }
+        else
+            tempbx = tempbx >> 1 ;
+    }
+
+    tempbx -= 2 ;
+    temp = tempbx & 0x00FF ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+            {
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( ModeNo == 0x2f )
+                        temp += 1 ;
+                }
+            }
+        }
+        else
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( ModeNo == 0x2f )
+                    temp += 1 ;
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2F , temp ) ;
+
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    temp |= ( ( tempbx & 0xFF00 ) >> 8 ) << 6 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+            {
+                temp |= 0x10 ;
+
+                if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+                    temp |= 0x20 ;
+            }
+        }
+        else
+        {
+            temp |= 0x10 ;
+            if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+                temp |= 0x20 ;
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , temp ) ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )	/* TV gatingno */
+    {
+        tempbx = pVBInfo->VDE ;
+        tempcx = tempbx - 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+                tempbx = tempbx >> 1 ;
+        }
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            temp=0;
+            if( tempcx & 0x0400 )
+                temp |= 0x20 ;
+
+            if ( tempbx & 0x0400 )
+                temp |= 0x40 ;
+
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , temp ) ;
+        }
+
+        temp = ( ( ( tempbx - 3 ) & 0x0300 ) >> 8 ) << 5 ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x46 , temp ) ;
+        temp = ( tempbx - 3 ) & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x47 , temp ) ;
+    }
+
+    tempbx = tempbx & 0x00FF ;
+
+    if ( !( modeflag & HalfDCLK ) )
+    {
+        tempcx = pVBInfo->VGAHDE ;
+        if ( tempcx >= pVBInfo->HDE )
+        {
+            tempbx |= 0x2000 ;
+            tempax &= 0x00FF ;
+        }
+    }
+
+    tempcx = 0x0101 ;
+
+    if( pVBInfo->VBInfo & SetCRT2ToTV ) { /*301b*/
+        if(pVBInfo->VGAHDE>=1024)
+        {
+	    tempcx=0x1920;
+            if(pVBInfo->VGAHDE>=1280)
+            {
+	        tempcx=0x1420;
+	        tempbx=tempbx&0xDFFF;
+            }
+        }
+    }
+
+    if ( !( tempbx & 0x2000 ) )
+    {
+        if ( modeflag & HalfDCLK )
+        {
+            tempcx = ( tempcx & 0xFF00 ) | ( ( tempcx & 0x00FF ) << 1 ) ;
+	}
+
+        push1 = tempbx ;
+        tempeax = pVBInfo->VGAHDE ;
+        tempebx = ( tempcx & 0xFF00 ) >> 8 ;
+        longtemp = tempeax * tempebx ;
+        tempecx = tempcx & 0x00FF ;
+        longtemp = longtemp / tempecx ;
+
+	/* 301b */
+        tempecx = 8 * 1024 ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempecx = tempecx * 8 ;
+        }
+
+        longtemp = longtemp * tempecx ;
+        tempecx = pVBInfo->HDE ;
+        temp2 = longtemp % tempecx ;
+        tempeax = longtemp / tempecx ;
+        if ( temp2 != 0 )
+        {
+            tempeax += 1 ;
+        }
+
+        tempax = ( USHORT )tempeax ;
+
+	/* 301b */
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempcx = ( ( tempax & 0xFF00 ) >> 5 ) >> 8 ;
+        }
+        /* end 301b */
+
+        tempbx = push1 ;
+        tempbx =( USHORT )( ( ( tempeax & 0x0000FF00 ) & 0x1F00 ) | ( tempbx & 0x00FF ) ) ;
+        tempax =( USHORT )( ( ( tempeax & 0x000000FF ) << 8 ) | ( tempax & 0x00FF ) ) ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+    }
+    else
+    {
+        temp = ( tempax & 0x00FF ) >> 8 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x44 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x45 , ~0x03F , temp ) ;
+    temp = tempcx & 0x00FF ;
+
+    if ( tempbx & 0x2000 )
+        temp = 0 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+        temp |= 0x18 ;
+
+    XGINew_SetRegANDOR(pVBInfo->Part2Port,0x46,~0x1F,temp);
+    if ( pVBInfo->TVInfo & SetPALTV )
+    {
+        tempbx = 0x0382 ;
+        tempcx = 0x007e ;
+    }
+    else
+    {
+        tempbx = 0x0369 ;
+        tempcx = 0x0061 ;
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4b , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4c , temp ) ;
+
+    temp = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x03 ;
+    temp = temp << 2 ;
+    temp |= ( ( tempbx & 0xFF00 ) >> 8 ) & 0x03 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        temp |= 0x10 ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            temp |= 0x20 ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            temp |= 0x60 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4d , temp ) ;
+    temp=XGINew_GetReg1( pVBInfo->Part2Port , 0x43 ) ;		/* 301b change */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , ( USHORT )( temp - 3 ) ) ;
+
+    if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+    {
+        if ( pVBInfo->TVInfo & NTSC1024x768 )
+        {
+            TimingPoint = XGI_NTSC1024AdjTime ;
+            for( i = 0x1c , j = 0 ; i <= 0x30 ; i++ , j++ )
+            {
+                XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+            }
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , 0x72 ) ;
+        }
+    }
+
+    /* [ycchen] 01/14/03 Modify for 301C PALM Support */
+    if ( pVBInfo->VBType & VB_XGI301C )
+    {
+        if ( pVBInfo->TVInfo & SetPALMTV )
+	    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x08 , 0x08 ) ;	/* PALM Mode */
+    }
+
+    if ( pVBInfo->TVInfo & SetPALMTV )
+    {
+        tempax = ( UCHAR )XGINew_GetReg1( pVBInfo->Part2Port , 0x01 ) ;
+        tempax-- ;
+        XGINew_SetRegAND( pVBInfo->Part2Port , 0x01 , tempax ) ;
+
+        /* if ( !( pVBInfo->VBType & VB_XGI301C ) ) */
+        XGINew_SetRegAND( pVBInfo->Part2Port , 0x00 , 0xEF ) ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+        {
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , 0x00 ) ;
+        }
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT push1 ,
+           push2 ,
+           pushbx ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           tempah ,
+           tempbh ,
+           tempch ,
+           resinfo ,
+           modeflag ,
+           CRT1Index ;
+
+    XGI_LCDDesStruct *LCDBDesPtr = NULL ;
+
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+    }
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+    {
+        return ;
+    }
+
+    tempbx = pVBInfo->HDE ;			/* RHACTE=HDE-1 */
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempbx = tempbx >> 1 ;
+
+    tempbx -= 1 ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2C , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2B , 0x0F , temp ) ;
+    temp = 0x01 ;
+
+    if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+    {
+        if ( pVBInfo->ModeType == ModeEGA )
+        {
+            if ( pVBInfo->VGAHDE >= 1024 )
+            {
+                temp = 0x02 ;
+                if ( pVBInfo->LCDInfo & LCDVESATiming )
+                    temp = 0x01 ;
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , temp ) ;
+    tempbx = pVBInfo->VDE ;			/* RTVACTEO=(VDE-1)&0xFF */
+    push1 = tempbx ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x03 , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0C , ~0x07 , temp ) ;
+
+    tempcx = pVBInfo->VT - 1 ;
+    push2 = tempcx + 1 ;
+    temp = tempcx & 0x00FF ;			/* RVTVT=VT-1 */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x19 , temp ) ;
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    temp = temp << 5 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1A , temp ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x09 , 0xF0 , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xF0 , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x17 , 0xFB , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x18 , 0xDF , 0x00 ) ;
+
+    /* Customized LCDB Des no add */
+    tempbx = 5 ;
+    LCDBDesPtr = ( XGI_LCDDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    tempah = pVBInfo->LCDResInfo ;
+    tempah &= PanelResInfo ;
+
+    if ( ( tempah == Panel1024x768 ) || ( tempah == Panel1024x768x75 ) )
+    {
+        tempbx = 1024 ;
+        tempcx = 768 ;
+    }
+    else if ( ( tempah == Panel1280x1024 ) || ( tempah == Panel1280x1024x75 ) )
+    {
+        tempbx = 1280 ;
+        tempcx = 1024 ;
+    }
+    else if ( tempah == Panel1400x1050 )
+    {
+        tempbx = 1400 ;
+        tempcx = 1050 ;
+    }
+    else
+    {
+        tempbx = 1600 ;
+        tempcx = 1200 ;
+    }
+
+    if ( pVBInfo->LCDInfo & EnableScalingLCD )
+    {
+        tempbx = pVBInfo->HDE ;
+        tempcx = pVBInfo->VDE ;
+    }
+
+    pushbx = tempbx ;
+    tempax = pVBInfo->VT ;
+    pVBInfo->LCDHDES = LCDBDesPtr->LCDHDES ;
+    pVBInfo->LCDHRS = LCDBDesPtr->LCDHRS ;
+    pVBInfo->LCDVDES = LCDBDesPtr->LCDVDES ;
+    pVBInfo->LCDVRS = LCDBDesPtr->LCDVRS ;
+    tempbx = pVBInfo->LCDVDES ;
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;	/* lcdvdes */
+
+    temp = tempbx & 0x00FF ;	/* RVEQ1EQ=lcdvdes */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x05 , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x06 , temp ) ;
+    tempch = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x07 ;
+    tempbh = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+    tempah = tempch ;
+    tempah = tempah << 3 ;
+    tempah |= tempbh ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , tempah ) ;
+
+    /* getlcdsync() */
+    XGI_GetLCDSync( &tempax , &tempbx,pVBInfo ) ;
+    tempcx = tempbx ;
+    tempax = pVBInfo->VT ;
+    tempbx = pVBInfo->LCDVRS ;
+
+    /* if ( SetLCD_Info & EnableScalingLCD ) */
+    tempcx += tempbx ;
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;	/* RTVACTEE=lcdvrs */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x04 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    temp |= ( tempcx & 0x000F ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+    tempcx = pushbx ;
+    tempax = pVBInfo->HT ;
+    tempbx = pVBInfo->LCDHDES ;
+    tempbx &= 0x0FFF ;
+
+    if ( XGI_IsLCDDualLink(  pVBInfo ) )
+    {
+        tempax = tempax >> 1 ;
+        tempbx = tempbx >> 1 ;
+        tempcx = tempcx >> 1 ;
+    }
+
+    if ( pVBInfo->VBType & VB_XGI302LV )
+        tempbx += 1 ;
+
+    if ( pVBInfo->VBType & VB_XGI301C )  /* tap4 */
+        tempbx += 1 ;
+
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1F , temp ) ;	/* RHBLKE=lcdhdes */
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x20 , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x23 , temp ) ;	/* RHEQPLE=lcdhdee */
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x25 , temp ) ;
+
+    /* getlcdsync() */
+    XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+    tempcx = tempax ;
+    tempax = pVBInfo->HT ;
+    tempbx = pVBInfo->LCDHRS ;
+    /* if ( SetLCD_Info & EnableScalingLCD) */
+    if ( XGI_IsLCDDualLink( pVBInfo) )
+    {
+        tempax = tempax >> 1 ;
+        tempbx = tempbx >> 1 ;
+        tempcx = tempcx >> 1 ;
+    }
+
+    if ( pVBInfo->VBType & VB_XGI302LV )
+        tempbx += 1 ;
+
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;	/* RHBURSTS=lcdhrs */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1C , temp ) ;
+
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F0 , temp ) ;
+    temp = tempcx & 0x00FF ;	/* RHSYEXP2S=lcdhre */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x21 , temp ) ;
+
+    if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+    {
+        if ( pVBInfo->VGAVDE == 525 )
+        {
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+            {
+                temp = 0xC6 ;
+            }
+            else
+                temp = 0xC4 ;
+
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , 0xB3 ) ;
+        }
+
+        if ( pVBInfo->VGAVDE == 420 )
+        {
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+            {
+                temp = 0x4F ;
+            }
+            else
+                temp = 0x4E ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTap4Ptr */
+/* Input : */
+/* Output : di -> Tap4 Reg. Setting Pointer */
+/* Description : */
+/* --------------------------------------------------------------------- */
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempbx ,
+           i ;
+
+    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+    if ( tempcx == 0 )
+    {
+        tempax = pVBInfo->VGAHDE ;
+        tempbx = pVBInfo->HDE ;
+    }
+    else
+    {
+        tempax = pVBInfo->VGAVDE ;
+        tempbx = pVBInfo->VDE ;
+    }
+
+    if ( tempax < tempbx )
+        return &EnlargeTap4Timing[ 0 ] ;
+    else if( tempax == tempbx )
+        return &NoScaleTap4Timing[ 0 ] ; 	/* 1:1 */
+    else
+        Tap4TimingPtr = NTSCTap4Timing ; 	/* NTSC */
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        Tap4TimingPtr = PALTap4Timing ;
+
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            Tap4TimingPtr = YPbPr525iTap4Timing ;
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            Tap4TimingPtr = YPbPr525pTap4Timing ;
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            Tap4TimingPtr = YPbPr750pTap4Timing ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        Tap4TimingPtr = HiTVTap4Timing ;
+
+    i = 0 ;
+    while( Tap4TimingPtr[ i ].DE != 0xFFFF )
+    {
+        if ( Tap4TimingPtr[ i ].DE == tempax )
+            break ;
+        i++ ;
+    }
+    return &Tap4TimingPtr[ i ] ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetTap4Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ,
+           j ;
+
+    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+    if ( !( pVBInfo->VBType & VB_XGI301C ) )
+        return ;
+
+#ifndef Tap4
+    XGINew_SetRegAND( pVBInfo->Part2Port , 0x4E , 0xEB ) ;	/* Disable Tap4 */
+#else            /* Tap4 Setting */
+
+    Tap4TimingPtr = XGI_GetTap4Ptr( 0 , pVBInfo) ;  /* Set Horizontal Scaling */
+    for( i = 0x80 , j = 0 ; i <= 0xBF ; i++ , j++ )
+        XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+
+    if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+    {
+        Tap4TimingPtr = XGI_GetTap4Ptr( 1 , pVBInfo);	/* Set Vertical Scaling */
+        for( i = 0xC0 , j = 0 ; i < 0xFF ; i++ , j++ )
+            XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+    }
+
+    if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x04 ) ;	/* Enable V.Scaling */
+    else
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x10 ) ;	/* Enable H.Scaling */
+#endif
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i;
+    UCHAR *tempdi;
+    USHORT  modeflag;
+
+    if(ModeNo<=0x13)
+    {
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;      /* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;     /* si+Ext_ResInfo */
+    }
+
+
+    XGINew_SetReg1(pVBInfo->Part3Port,0x00,0x00);
+    if(pVBInfo->TVInfo&SetPALTV)
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+    }
+    else
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xF5);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xB7);
+    }
+
+    if(!(pVBInfo->VBInfo&SetCRT2ToTV))
+    {
+        return;
+    }
+
+    if(pVBInfo->TVInfo&SetPALMTV)
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x3D,0xA8);
+    }
+
+    if((pVBInfo->VBInfo&SetCRT2ToHiVisionTV)|| (pVBInfo->VBInfo&SetCRT2ToYPbPr))
+    {
+        if(pVBInfo->TVInfo & SetYPbPrMode525i)
+        {
+            return;
+        }
+        tempdi=pVBInfo->HiTVGroup3Data;
+        if(pVBInfo->SetFlag&TVSimuMode)
+        {
+            tempdi=pVBInfo->HiTVGroup3Simu;
+            if(!(modeflag&Charx8Dot))
+            {
+                tempdi=pVBInfo->HiTVGroup3Text;
+            }
+        }
+
+        if(pVBInfo->TVInfo & SetYPbPrMode525p)
+        {
+            tempdi=pVBInfo->Ren525pGroup3;
+        }
+        if(pVBInfo->TVInfo & SetYPbPrMode750p)
+        {
+             tempdi=pVBInfo->Ren750pGroup3;
+        }
+
+        for(i=0;i<=0x3E;i++)
+        {
+            XGINew_SetReg1(pVBInfo->Part3Port,i,tempdi[i]);
+        }
+        if(pVBInfo->VBType&VB_XGI301C)  /* Marcovision */
+        {
+            if(pVBInfo->TVInfo & SetYPbPrMode525p)
+            {
+                XGINew_SetReg1(pVBInfo->Part3Port,0x28,0x3f);
+            }
+        }
+    }
+    return;
+}  /* {end of XGI_SetGroup3} */
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempcx ,
+           tempbx ,
+           modeflag ,
+           temp ,
+           temp2 ;
+
+    ULONG tempebx ,
+          tempeax ,
+          templong ;
+
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+    }
+
+    temp = pVBInfo->RVBHCFACT ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x13 , temp ) ;
+
+    tempbx = pVBInfo->RVBHCMAX ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x14 , temp ) ;
+    temp2 = ( ( tempbx & 0xFF00 ) >> 8 ) << 7 ;
+    tempcx = pVBInfo->VGAHT - 1 ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x16 , temp ) ;
+
+    temp =( ( tempcx & 0xFF00 ) >> 8 ) << 3 ;
+    temp2 |= temp ;
+
+    tempcx = pVBInfo->VGAVT - 1 ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        tempcx -= 5 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x17 , temp ) ;
+    temp = temp2 | ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x15 , temp ) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x08 ) ;
+    tempcx = pVBInfo->VBInfo ;
+    tempbx = pVBInfo->VGAHDE ;
+
+    if ( modeflag & HalfDCLK )
+    {
+        tempbx = tempbx >> 1 ;
+    }
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempbx = tempbx >> 1 ;
+
+    if(tempcx&SetCRT2ToHiVisionTV)
+    {
+        temp=0;
+        if(tempbx<=1024)
+            temp=0xA0;
+       if(tempbx == 1280)
+          temp = 0xC0;
+    }
+    else if(tempcx&SetCRT2ToTV)
+    {
+         temp=0xA0;
+         if(tempbx <= 800)
+             temp=0x80;
+    }
+    else
+    {
+	 temp=0x80;
+	 if(pVBInfo->VBInfo&SetCRT2ToLCD)
+	 {
+	     temp=0;
+	     if(tempbx>800)
+	         temp=0x60;
+	 }
+    }
+
+    if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+    {
+        temp = 0x00 ;
+        if ( pVBInfo->VGAHDE == 1280 )
+            temp = 0x40 ;
+        if ( pVBInfo->VGAHDE == 1024 )
+	    temp = 0x20 ;
+    }
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0E , ~0xEF , temp ) ;
+
+    tempebx = pVBInfo->VDE ;
+
+    if ( tempcx & SetCRT2ToHiVisionTV )
+    {
+        if ( !( temp & 0xE000 ) )
+            tempbx = tempbx >> 1 ;
+    }
+
+    tempcx = pVBInfo->RVBHRS ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x18 , temp );
+
+    tempeax = pVBInfo->VGAVDE ;
+    tempcx |= 0x04000 ;
+
+
+    if ( tempeax <= tempebx )
+    {
+        tempcx=(tempcx&(~0x4000));
+        tempeax = pVBInfo->VGAVDE ;
+    }
+    else
+    {
+        tempeax -= tempebx ;
+    }
+
+
+    templong = ( tempeax * 256 * 1024 ) % tempebx ;
+    tempeax = ( tempeax * 256 * 1024 ) / tempebx ;
+    tempebx = tempeax ;
+
+    if ( templong != 0 )
+    {
+        tempebx++ ;
+    }
+
+
+    temp = ( USHORT )( tempebx & 0x000000FF ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x1B , temp ) ;
+
+    temp = ( USHORT )( ( tempebx & 0x0000FF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x1A , temp ) ;
+    tempbx = ( USHORT )( tempebx >> 16 ) ;
+    temp = tempbx & 0x00FF ;
+    temp = temp << 4 ;
+    temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x19 , temp ) ;
+
+    /* 301b */
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        temp = 0x0028 ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1C , temp ) ;
+        tempax = pVBInfo->VGAHDE ;
+        if ( modeflag & HalfDCLK )
+        {
+            tempax = tempax >> 1 ;
+        }
+
+        if ( XGI_IsLCDDualLink( pVBInfo ) )
+            tempax = tempax >> 1 ;
+
+        /* if((pVBInfo->VBInfo&(SetCRT2ToLCD))||((pVBInfo->TVInfo&SetYPbPrMode525p)||(pVBInfo->TVInfo&SetYPbPrMode750p))) { */
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            if ( tempax > 800 )
+                tempax -= 800 ;
+        }
+        else
+        {
+            if ( pVBInfo->VGAHDE > 800 )
+            {
+                if ( pVBInfo->VGAHDE == 1024 )
+                    tempax = ( tempax * 25 / 32 ) - 1 ;
+                else
+                    tempax = ( tempax * 20 / 32 ) - 1 ;
+            }
+        }
+        tempax -= 1 ;
+
+/*
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+        {
+            if ( pVBInfo->VBType & VB_XGI301LV )
+            {
+                if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                {
+                    if ( pVBInfo->VGAHDE > 800 )
+                    {
+                        if ( pVBInfo->VGAHDE == 1024 )
+                            tempax = ( tempax * 25 / 32 ) - 1 ;
+                        else
+                            tempax = ( tempax * 20 / 32 ) - 1 ;
+                    }
+                }
+            }
+            else
+            {
+                if ( pVBInfo->VGAHDE > 800 )
+                {
+                    if ( pVBInfo->VGAHDE == 1024 )
+                        tempax = ( tempax * 25 / 32 ) - 1 ;
+                    else
+                        tempax = ( tempax * 20 / 32 ) - 1 ;
+                }
+            }
+        }
+*/
+
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp = ( ( temp & 0x0003 ) << 4 ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1E , temp ) ;
+        temp = ( tempax & 0x00FF ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1D , temp ) ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+        {
+            if ( pVBInfo->VGAHDE > 800 )
+            {
+                XGINew_SetRegOR( pVBInfo->Part4Port , 0x1E , 0x08 ) ;
+            }
+        }
+        temp = 0x0036 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( !( pVBInfo->TVInfo & ( NTSC1024x768 | SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+            {
+                temp |= 0x0001 ;
+                if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->TVInfo & TVSimuMode ) ) )
+                    temp &= ( ~0x0001 ) ;
+            }
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x1F , 0x00C0 , temp ) ;
+        tempbx = pVBInfo->HT ;
+        if ( XGI_IsLCDDualLink( pVBInfo ) )
+            tempbx = tempbx >> 1 ;
+        tempbx = ( tempbx >> 1 ) - 2 ;
+        temp = ( ( tempbx & 0x0700 ) >> 8 ) << 3 ;
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , 0x00C0 , temp ) ;
+        temp = tempbx & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x22 , temp ) ;
+    }
+    /* end 301b */
+
+    if ( pVBInfo->ISXPDOS == 0 )
+        XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup5 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup5( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT Pindex ,
+           Pdata ;
+
+    Pindex = pVBInfo->Part5Port ;
+    Pdata = pVBInfo->Part5Port + 1 ;
+    if ( pVBInfo->ModeType == ModeVGA )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetInSlaveMode | LoadDACFlag | CRT2DisplayFlag ) ) )
+        {
+            XGINew_EnableCRT2(pVBInfo) ;
+            /* LoadDAC2(pVBInfo->Part5Port,ModeNo,ModeIdIndex); */
+        }
+    }
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLcdPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i ,
+           tempdx ,
+           tempcx ,
+           tempbx ,
+           tempal ,
+           modeflag ,
+           table ;
+
+    XGI330_LCDDataTablStruct *tempdi = 0 ;
+
+
+    tempbx = BX;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempal = tempal & 0x0f ;
+
+    if ( tempbx <= 1 )		/* ExpLink */
+    {
+        if ( ModeNo <= 0x13 )
+        {
+            tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ; /* find no Ext_CRT2CRTC2 */
+        }
+        else
+        {
+            tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            if ( ModeNo <= 0x13 )
+                tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC2 ;
+            else
+                tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC2 ;
+        }
+
+        if ( tempbx & 0x01 )
+            tempal = ( tempal >> 4 ) ;
+
+        tempal = ( tempal & 0x0f ) ;
+    }
+
+    tempcx = LCDLenList[ tempbx ] ;	/* mov cl,byte ptr cs:LCDLenList[bx] */
+
+    if ( pVBInfo->LCDInfo & EnableScalingLCD )	/* ScaleLCD */
+    {
+        if ( ( tempbx == 5 ) || ( tempbx ) == 7 )
+            tempcx = LCDDesDataLen2 ;
+        else if ( ( tempbx == 3 ) || ( tempbx == 8 ) )
+            tempcx = LVDSDesDataLen2 ;
+    }
+    /* mov di, word ptr cs:LCDDataList[bx] */
+    /* tempdi=pVideoMemory[LCDDataList+tempbx*2]|(pVideoMemory[LCDDataList+tempbx*2+1]<<8); */
+
+    switch( tempbx )
+    {
+        case 0:
+            tempdi = XGI_EPLLCDCRT1Ptr_H ;
+            break ;
+        case 1:
+            tempdi = XGI_EPLLCDCRT1Ptr_V ;
+             break ;
+        case 2:
+            tempdi = XGI_EPLLCDDataPtr ;
+            break ;
+        case 3:
+            tempdi = XGI_EPLLCDDesDataPtr ;
+            break ;
+        case 4:
+            tempdi = XGI_LCDDataTable ;
+            break ;
+        case 5:
+            tempdi = XGI_LCDDesDataTable ;
+            break ;
+        case 6:
+            tempdi = XGI_EPLCHLCDRegPtr ;
+            break ;
+        case 7:
+        case 8:
+        case 9:
+            tempdi = 0 ;
+            break ;
+        default:
+        break ;
+    }
+
+    if ( tempdi == 0x00 )  /* OEMUtil */
+        return 0 ;
+
+    table = tempbx ;
+    i = 0 ;
+
+    while( tempdi[ i ].PANELID != 0xff )
+    {
+        tempdx = pVBInfo->LCDResInfo ;
+        if ( tempbx & 0x0080 )     /* OEMUtil */
+        {
+            tempbx &= ( ~0x0080 ) ;
+            tempdx = pVBInfo->LCDTypeInfo ;
+        }
+
+        if ( pVBInfo->LCDInfo & EnableScalingLCD )
+        tempdx &= ( ~PanelResInfo ) ;
+
+        if ( tempdi[ i ].PANELID == tempdx )
+        {
+            tempbx = tempdi[ i ].MASK ;
+            tempdx = pVBInfo->LCDInfo ;
+
+            if ( ModeNo <= 0x13 )         /* alan 09/10/2003 */
+                tempdx |= SetLCDStdMode ;
+
+            if ( modeflag & HalfDCLK )
+                tempdx |= SetLCDLowResolution ;
+
+            tempbx &= tempdx;
+            if ( tempbx == tempdi[ i ].CAP )
+                break ;
+        }
+        i++ ;
+    }
+
+    if ( table == 0 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDSCRT11024x768_1_H[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDSCRT11024x768_2_H[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDSCRT11280x1024_1_H[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDSCRT11280x1024_2_H[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDSCRT11400x1050_1_H[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDSCRT11400x1050_2_H[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDSCRT11600x1200_1_H[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSCRT11024x768_1_Hx75[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSCRT11024x768_2_Hx75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDSCRT11280x1024_1_Hx75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDSCRT11280x1024_2_Hx75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 1 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDSCRT11024x768_1_V[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDSCRT11024x768_2_V[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDSCRT11280x1024_1_V[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDSCRT11280x1024_2_V[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDSCRT11400x1050_1_V[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDSCRT11400x1050_2_V[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDSCRT11600x1200_1_V[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSCRT11024x768_1_Vx75[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSCRT11024x768_2_Vx75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDSCRT11280x1024_1_Vx75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDSCRT11280x1024_2_Vx75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 2 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDS1024x768Data_1[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDS1024x768Data_2[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDS1280x1024Data_1[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDS1280x1024Data_2[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDS1400x1050Data_1[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDS1400x1050Data_2[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDS1600x1200Data_1[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSNoScalingData[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDS1024x768Data_1x75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDS1024x768Data_2x75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDS1280x1024Data_1x75[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_LVDS1280x1024Data_2x75[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_LVDSNoScalingDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 3 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDS1024x768Des_1[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDS1024x768Des_3[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDS1024x768Des_2[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDS1280x1024Des_1[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDS1280x1024Des_2[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDS1400x1050Des_1[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDS1400x1050Des_2[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDS1600x1200Des_1[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSNoScalingDesData[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDS1024x768Des_1x75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDS1024x768Des_3x75[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_LVDS1024x768Des_2x75[ tempal ] ;
+                break;
+            case 12:
+                return &XGI_LVDS1280x1024Des_1x75[ tempal ] ;
+                break ;
+            case 13:
+                return &XGI_LVDS1280x1024Des_2x75[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_LVDSNoScalingDesDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 4 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtLCD1024x768Data[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_StLCD1024x768Data[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CetLCD1024x768Data[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_ExtLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_StLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_CetLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_ExtLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_StLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_CetLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_ExtLCD1600x1200Data[ tempal ] ;
+                break  ;
+            case 10:
+                return &XGI_StLCD1600x1200Data[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_NoScalingData[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 13:
+                return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_CetLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 15:
+                 return &XGI_ExtLCD1280x1024x75Data[ tempal ] ;
+                break ;
+            case 16:
+                return &XGI_StLCD1280x1024x75Data[ tempal ] ;
+                break;
+            case 17:
+                return &XGI_CetLCD1280x1024x75Data[ tempal ] ;
+                break;
+            case 18:
+                return &XGI_NoScalingDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 5 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_StLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CetLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 3:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 4:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 5:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_CetLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_CetLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 6:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1400x1050Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 7:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1400x1050Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_CetLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_CetLCDDes1400x1050Data2[ tempal ] ;
+                break ;
+            case 10:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1600x1200Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1600x1200Data[ tempal ] ;
+                break ;
+            case 11:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1600x1200Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1600x1200Data[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_NoScalingDesData[ tempal ] ;
+                break;
+            case 13:
+                return &XGI_ExtLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_StLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 15:
+                return &XGI_CetLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 16:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 17:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 18:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_CetLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_CetLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 19:
+                return &XGI_NoScalingDesDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 6 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_CH7017LV1024x768[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_CH7017LV1400x1050[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    return 0 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i , tempdx , tempbx , tempal , modeflag , table ;
+    XGI330_TVDataTablStruct *tempdi = 0 ;
+
+    tempbx = BX ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempal = tempal & 0x3f ;
+    table = tempbx ;
+
+    switch( tempbx )
+    {
+        case 0:
+            tempdi = 0 ;	/*EPLCHTVCRT1Ptr_H;*/
+            if ( pVBInfo->IF_DEF_CH7007 == 1 )
+            {
+                tempdi = XGI_EPLCHTVCRT1Ptr;
+            }
+            break ;
+        case 1:
+            tempdi = 0 ;	/*EPLCHTVCRT1Ptr_V;*/
+            if ( pVBInfo->IF_DEF_CH7007 == 1 )
+            {
+                tempdi = XGI_EPLCHTVCRT1Ptr;
+            }
+            break ;
+        case 2:
+            tempdi = XGI_EPLCHTVDataPtr ;
+            break ;
+        case 3:
+            tempdi = 0 ;
+            break ;
+        case 4:
+            tempdi = XGI_TVDataTable ;
+            break ;
+        case 5:
+            tempdi = 0 ;
+            break ;
+        case 6:
+            tempdi = XGI_EPLCHTVRegPtr ;
+            break ;
+        default:
+            break ;
+    }
+
+    if ( tempdi == 0x00 )  /* OEMUtil */
+        return( 0 ) ;
+
+    tempdx = pVBInfo->TVInfo ;
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+        tempdx = tempdx | SetTVLockMode ;
+
+    if ( modeflag & HalfDCLK )
+        tempdx = tempdx | SetTVLowResolution ;
+
+    i = 0 ;
+
+    while( tempdi[ i ].MASK != 0xffff )
+    {
+        if ( ( tempdx & tempdi[ i ].MASK ) == tempdi[ i ].CAP )
+            break ;
+        i++ ;
+    }
+
+    if ( table == 0x00 ) /* 07/05/22 */
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVCRT1UNTSC_H[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVCRT1ONTSC_H[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVCRT1UPAL_H[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVCRT1OPAL_H[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+#endif
+    }
+    else if ( table == 0x01 )
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVCRT1UNTSC_V[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVCRT1ONTSC_V[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVCRT1UPAL_V[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVCRT1OPAL_V[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+#endif
+    }
+    else if ( table == 0x04 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtPALData[ tempal ] ;
+		break ;
+            case 1:
+                return &XGI_ExtNTSCData[ tempal ] ;
+ 		break ;
+      	    case 2:
+      	   	return &XGI_StPALData[ tempal ] ;
+ 		break ;
+            case 3:
+           	return &XGI_StNTSCData[ tempal ] ;
+ 		break ;
+      	    case 4:
+      	   	return &XGI_ExtHiTVData[ tempal ] ;
+ 		break ;
+      	    case 5:
+      	   	return &XGI_St2HiTVData[ tempal ] ;
+ 		break ;
+      	    case 6:
+      	   	return &XGI_ExtYPbPr525iData[ tempal ] ;
+ 		break ;
+      	    case 7:
+      	   	return &XGI_ExtYPbPr525pData[ tempal ] ;
+ 		break ;
+      	    case 8:
+      	   	return &XGI_ExtYPbPr750pData[ tempal ] ;
+ 		break ;
+      	    case 9:
+      	   	return &XGI_StYPbPr525iData[ tempal ] ;
+ 		break ;
+      	    case 10:
+      	   	return &XGI_StYPbPr525pData[ tempal ] ;
+ 		break ;
+      	    case 11:
+      	   	return &XGI_StYPbPr750pData[ tempal ] ;
+             	break;
+            case 12: 	/* avoid system hang */
+      	   	return &XGI_ExtNTSCData[ tempal ] ;
+             	break ;
+            case 13:
+      	   	return &XGI_St1HiTVData[ tempal ] ;
+             	break ;
+            default:
+                break ;
+        }
+    }
+    else if( table == 0x02 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_CHTVUNTSCData[ tempal ] ;
+                break ;
+            case 1:
+      	        return &XGI_CHTVONTSCData[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CHTVUPALData[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_CHTVOPALData[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if( table == 0x06 )
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          /* VideoDebugPrint((0, "XGI_GetTVPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVReg_UNTSC[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVReg_ONTSC[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVReg_UPAL[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVReg_OPAL[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+        else
+        {
+            switch( tempdi[ i ].DATAPTR )
+            {
+              case 0:
+                return &XGI_CHTVRegUNTSC[ tempal ] ;
+                break ;
+              case 1:
+                return &XGI_CHTVRegONTSC[ tempal ] ;
+                break ;
+              case 2:
+                return &XGI_CHTVRegUPAL[ tempal ] ;
+                break ;
+              case 3:
+                return &XGI_CHTVRegOPAL[ tempal ] ;
+                break ;
+              default:
+                break ;
+            }
+        }
+#endif
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BacklightByDrv */
+/* Input : */
+/* Output : TRUE -> Skip backlight control */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BacklightByDrv( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempah ;
+
+    tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x3A ) ;
+    if ( tempah & BacklightControlBit )
+        return TRUE ;
+    else
+        return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDDisable */
+/* Input : */
+/* Output : */
+/* Description : Turn off VDD & Backlight : Fire disable procedure */
+/* --------------------------------------------------------------------- */
+/*
+void XGI_FirePWDDisable( PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x00 , 0xFC ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDEnable */
+/* Input : */
+/* Output : */
+/* Description : Turn on VDD & Backlight : Fire enable procedure */
+/* --------------------------------------------------------------------- */
+void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x03 , 0xFC ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+    if ( tempbl == 1 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S1, pVBInfo ) ;
+
+    if ( tempbl == 2 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S2, pVBInfo ) ;
+
+    if ( tempbl == 3 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S3, pVBInfo ) ;
+
+    if ( tempbl == 4 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelPower */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/O : ah = 0011b = 03h ; Backlight on, Power on */
+/* = 0111b = 07h ; Backlight on, Power off */
+/* = 1011b = 0Bh ; Backlight off, Power on */
+/* = 1111b = 0Fh ; Backlight off, Power off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x26 , tempbl , tempah ) ;
+    else
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x11 , tempbl , tempah ) ;
+}
+
+UCHAR XG21GPIODataTransfer(UCHAR ujDate)
+{
+    UCHAR  ujRet = 0;
+    UCHAR  i = 0;
+
+    for (i=0; i<8; i++)
+	{
+    	ujRet = ujRet << 1;
+	/* ujRet |= GETBITS(ujDate >> i, 0:0); */
+        ujRet |= (ujDate >> i) & 1;
+    }
+
+	return ujRet;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output                                                                     */
+/*      bl[5] : LVDS signal                                                   */
+/*      bl[1] : LVDS backlight                                                */
+/*      bl[0] : LVDS VDD                                                      */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x23 ) ; /* enable GPIO write */
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp = XG21GPIODataTransfer(temp);
+    temp &= 0x23;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+    return temp;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output                                                                     */
+/*      bl[5] : LVDS signal                                                   */
+/*      bl[1] : LVDS backlight                                                */
+/*      bl[0] : LVDS VDD                                                      */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,CRB4,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x0C ) ; /* enable GPIO write */
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp &= 0x0C;
+    temp >>= 2;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+    CRB4 = XGINew_GetReg1( pVBInfo->P3d4 , 0xB4 ) ;
+    temp |= ((CRB4&0x04)<<3);
+    return temp;
+}
+/*----------------------------------------------------------------------------*/
+/* input                                                                      */
+/*      bl[5] : 1;LVDS signal on                                              */
+/*      bl[1] : 1;LVDS backlight on                                           */
+/*      bl[0] : 1:LVDS VDD on                                                 */
+/*      bh: 100000b : clear bit 5, to set bit5                                */
+/*          000010b : clear bit 1, to set bit1                                */
+/*          000001b : clear bit 0, to set bit0                                */
+/*----------------------------------------------------------------------------*/
+void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    tempbh &= 0x23;
+    tempbl &= 0x23;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+
+    if (tempbh&0x20)
+    {
+      temp = (tempbl>>4)&0x02;
+
+      XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+    }
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp = XG21GPIODataTransfer(temp);
+    temp &= ~tempbh;
+    temp |= tempbl;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , temp ) ;
+}
+
+void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+    USHORT tempbh0,tempbl0;
+
+    tempbh0 = tempbh;
+    tempbl0 = tempbl;
+    tempbh0 &= 0x20;
+    tempbl0 &= 0x20;
+    tempbh0 >>= 3;
+    tempbl0 >>= 3;
+
+    if (tempbh&0x20)
+    {
+      temp = (tempbl>>4)&0x02;
+
+      XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~tempbh0 , tempbl0 ) ;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    tempbh &= 0x03;
+    tempbl &= 0x03;
+    tempbh <<= 2;
+    tempbl <<= 2;                                       /* GPIOC,GPIOD */
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~tempbh , tempbl ) ;
+}
+
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+    if (index<sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct))
+    {
+      return index;
+    }
+    return 0;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_XG21SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    if ( tempbl == 1 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S1, pVBInfo ) ;
+
+    if ( tempbl == 2 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S2, pVBInfo ) ;
+
+    if ( tempbl == 3 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S3, pVBInfo ) ;
+
+    if ( tempbl == 4 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT xres ,
+           yres ,
+           colordepth ,
+           modeflag ,
+           resindex ,
+           lvdstableindex;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if ( !( modeflag & Charx8Dot ) )
+    {
+        xres /= 9;
+        xres *= 8;
+    }
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( ( ModeNo>0x13 ) && ( modeflag & HalfDCLK ) )
+        {
+          xres *=  2 ;
+        }
+        if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+        {
+          yres *=  2 ;
+        }
+    }
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    if ( xres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) )
+      return FALSE;
+
+    if ( yres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE) )
+      return FALSE;
+
+    if ( ModeNo > 0x13 )
+    {
+      if ( ( xres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) ) ||
+           ( yres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE)) )
+      {
+          colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+          if ( colordepth > 2 )
+          {
+            return FALSE;
+          }
+      }
+    }
+    return TRUE;
+}
+
+void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[0] 1: 18bit */
+    temp = ( temp & 1 ) << 6;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x40 , temp ) ;      /* SR06[6] 18bit Dither */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ;  /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: dual 12bits */
+
+}
+
+void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[1:0] 01: 18bit, 00: dual 12, 10: single 24 */
+    temp = ( temp & 3 ) << 6;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0xc0 , temp & 0x80 ) ;  /* SR06[7]0: dual 12/1: single 24 [6] 18bit Dither <= 0 h/w recommend */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ;  /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: 24bits */
+
+}
+
+void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR temp,Miscdata;
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ,
+           lvdstableindex ;
+    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    USHORT value;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+
+    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp &= LCDPolarity;
+    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+    XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
+
+    XGI_SetXG21FPBits(pVBInfo);
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if (!( modeflag & Charx8Dot ))
+      xres = xres * 8 / 9;
+
+    LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+    LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+    if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+    {
+      LVDSHBS -=  xres/4 ;
+    }
+    if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+    LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+    if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+    LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+    if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+    LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+    LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+    LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+    if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+    {
+      LVDSVBS +=  yres/2 ;
+    }
+    if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+    LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+    if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+    LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+    if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+    LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+    }
+
+    /* HT SR0B[1:0] CR00 */
+    value = ( LVDSHT >> 3 ) - 5;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+    /* HBS SR0B[5:4] CR02 */
+    value = ( LVDSHBS >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+    /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+    value = ( LVDSHBE >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+    /* HRS SR0B[7:6] CR04 */
+    value = ( LVDSHRS >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+    /* Panel HRS SR2F[1:0] SR2E[7:0]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+    /* HRE SR0C[2] CR05[4:0] */
+    value = ( LVDSHRE >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+    /* Panel HRE SR2F[7:2]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+    /* VT SR0A[0] CR07[5][0] CR06 */
+    value = LVDSVT - 2 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+    /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+    value = LVDSVBS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+    /* VBE SR0A[4] CR16 */
+    value = LVDSVBE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+    /* VRS SR0A[3] CR7[7][2] CR10 */
+    value = LVDSVRS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+    /* Panel VRS SR3F[1:0] SR34[7:0] SR33[0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0x03 , ( value & 0x600 ) >> 9 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , (value >> 1) & 0xFF ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x33 , ~0x01 , value & 0x01 ) ;
+
+    /* VRE SR0A[5] CR11[3:0] */
+    value = LVDSVRE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+    /* Panel VRE SR3F[7:2] */ /* SR3F[7] has to be 0, h/w bug */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0x7C ) ;
+
+    for ( temp=0, value = 0; temp < 3; temp++)
+    {
+
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+        value += 0x10;
+    }
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ;    /* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;    /* set data, panning = 0, shift left 1 dot*/
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* Enable Attribute */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+    }
+
+
+}
+
+/* no shadow case */
+void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR temp,Miscdata;
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ,
+           lvdstableindex ;
+    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    USHORT value;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp &= LCDPolarity;
+    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+    XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
+
+    XGI_SetXG27FPBits(pVBInfo);
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if (!( modeflag & Charx8Dot ))
+      xres = xres * 8 / 9;
+
+    LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+    LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+    if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+    {
+      LVDSHBS -=  xres/4 ;
+    }
+    if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+    LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+    if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+    LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+    if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+    LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+    LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+    LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+    if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+    {
+      LVDSVBS +=  yres/2 ;
+    }
+    if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+    LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+    if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+    LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+    if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+    LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+    }
+
+    /* HT SR0B[1:0] CR00 */
+    value = ( LVDSHT >> 3 ) - 5;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+    /* HBS SR0B[5:4] CR02 */
+    value = ( LVDSHBS >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+    /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+    value = ( LVDSHBE >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+    /* HRS SR0B[7:6] CR04 */
+    value = ( LVDSHRS >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+    /* Panel HRS SR2F[1:0] SR2E[7:0]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+    /* HRE SR0C[2] CR05[4:0] */
+    value = ( LVDSHRE >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+    /* Panel HRE SR2F[7:2]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+    /* VT SR0A[0] CR07[5][0] CR06 */
+    value = LVDSVT - 2 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+    /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+    value = LVDSVBS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+    /* VBE SR0A[4] CR16 */
+    value = LVDSVBE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+    /* VRS SR0A[3] CR7[7][2] CR10 */
+    value = LVDSVRS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+    /* Panel VRS SR35[2:0] SR34[7:0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , ( value & 0x700 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , value & 0xFF ) ;
+
+    /* VRE SR0A[5] CR11[3:0] */
+    value = LVDSVRE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+    /* Panel VRE SR3F[7:2] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0xFC ) ;
+
+    for ( temp=0, value = 0; temp < 3; temp++)
+    {
+
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+        value += 0x10;
+    }
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ;    /* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;    /* set data, panning = 0, shift left 1 dot*/
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* Enable Attribute */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+    }
+
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDON */
+/* Input : */
+/* Output : FALSE : Skip PSC Control */
+/* TRUE: Disable PSC */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ;
+
+    tempax = pVBInfo->VBInfo ;
+    if ( tempax & SetCRT2ToDualEdge )
+        return FALSE ;
+    else if ( tempax & ( DisableCRT2Display | SwitchToCRT2 | SetSimuScanMode ) )
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnablePWD(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ,
+           temp ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+    temp = pVBInfo->LCDCapList[ index ].PWD_2B ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2B , temp ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2C , pVBInfo->LCDCapList[ index ].PWD_2C ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2D , pVBInfo->LCDCapList[ index ].PWD_2D ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2E , pVBInfo->LCDCapList[ index ].PWD_2E ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2F , pVBInfo->LCDCapList[ index ].PWD_2F ) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x80 ) ; 	/* enable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegAND( pVBInfo->Part4Port , 0x27 , 0x7F ) ;	/* disable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableChISLCD */
+/* Input : */
+/* Output : FALSE -> Not LCD Mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           tempah ;
+
+    tempbx = pVBInfo->SetFlag & ( DisableChA | DisableChB ) ;
+    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port  , 0x2E ) ) ;
+
+    if ( tempbx & ( EnableChA | DisableChA ) )
+    {
+        if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
+            return FALSE ;
+    }
+
+    if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+        return FALSE ;
+
+    if ( tempah & 0x01 )       /* Chk LCDB Mode */
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableChISLCD */
+/* Input : */
+/* Output : 0 -> Not LCD mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           tempah ;
+
+
+    tempbx = pVBInfo->SetFlag & ( EnableChA | EnableChB ) ;
+    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
+
+    if ( tempbx & ( EnableChA | DisableChA ) )
+    {
+        if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
+            return FALSE ;
+    }
+
+    if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+        return FALSE ;
+
+    if ( tempah & 0x01 )       /* Chk LCDB Mode */
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr(  PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempal ,
+          tempah ,
+          tempbl ,
+          i ;
+
+    tempah = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+    tempal = tempah & 0x0F ;
+    tempah = tempah & 0xF0 ;
+    i = 0 ;
+    tempbl =  pVBInfo->LCDCapList[ i ].LCD_ID ;
+
+    while( tempbl != 0xFF )
+    {
+        if ( tempbl & 0x80 )   /* OEMUtil */
+        {
+            tempal = tempah ;
+            tempbl = tempbl & ~( 0x80 ) ;
+        }
+
+        if ( tempal == tempbl )
+            break ;
+
+        i++ ;
+
+        tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+    }
+
+    return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr1( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempah ,
+           tempal ,
+           tempbl ,
+           i ;
+
+    tempal = pVBInfo->LCDResInfo ;
+    tempah = pVBInfo->LCDTypeInfo ;
+
+    i = 0 ;
+    tempbl =  pVBInfo->LCDCapList[ i ].LCD_ID;
+
+    while( tempbl != 0xFF )
+    {
+        if ( ( tempbl & 0x80 ) && ( tempbl != 0x80 ) )
+        {
+            tempal = tempah ;
+            tempbl &= ~0x80 ;
+        }
+
+        if ( tempal == tempbl )
+            break ;
+
+        i++ ;
+        tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+    }
+
+    if ( tempbl == 0xFF )
+    {
+        pVBInfo->LCDResInfo = Panel1024x768 ;
+        pVBInfo->LCDTypeInfo = 0 ;
+        i = 0 ;
+    }
+
+    return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDSync( USHORT* HSyncWidth , USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT Index ;
+
+    Index = XGI_GetLCDCapPtr(pVBInfo) ;
+    *HSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_HSyncWidth ;
+    *VSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_VSyncWidth ;
+
+    return ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbl ,
+           tempah ;
+
+    if ( pVBInfo->SetFlag == Win9xDOSMode )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+            return ;
+        }
+        else  /* LVDS or CH7017 */
+            return ;
+    }
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !XGI_DisableChISLCD(pVBInfo) )
+        {
+            if ( ( XGI_EnableChISLCD(pVBInfo) ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                {
+                    XGI_EnablePWD( pVBInfo);
+                }
+                else
+                {
+                    pVBInfo->LCDInfo &= ( ~SetPWDEnable ) ;
+                    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        tempbl = 0xFD ;
+                        tempah = 0x02 ;
+                    }
+                    else
+                    {
+                        tempbl = 0xFB ;
+                        tempah = 0x00 ;
+                    }
+
+                    XGI_SetPanelPower( tempah , tempbl, pVBInfo ) ;
+                    XGI_SetPanelDelay( 1,pVBInfo ) ;
+                }
+            }
+        }
+    }	/* Not 340 */
+
+
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( !( pVBInfo->SetFlag & DisableChA ) )
+        {
+            if ( pVBInfo->SetFlag & EnableChA )
+            {
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x1E , 0x20 ) ;  /* Power on */
+            }
+            else
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToDualEdge ) /* SetCRT2ToLCDA ) */
+                {
+                    XGINew_SetReg1(pVBInfo->Part1Port,0x1E,0x20);  /* Power on */
+                }
+            }
+        }
+
+        if ( !( pVBInfo->SetFlag & DisableChB ) )
+        {
+            if ( ( pVBInfo->SetFlag & EnableChB ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV | SetCRT2ToRAMDAC ) ) )
+            {
+                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+                tempah &= 0xDF;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                        tempah |= 0x20 ;
+                }
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , tempah ) ;
+                XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;
+
+
+                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+
+                if ( !( tempah & 0x80 ) )
+                    XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;   	/* BVBDOENABLE = 1 */
+
+                XGINew_SetRegAND( pVBInfo->Part1Port , 0x00 , 0x7F ) ;     	/* BScreenOFF = 0 */
+            }
+        }
+
+        if ( ( pVBInfo->SetFlag & ( EnableChA | EnableChB ) ) || ( !( pVBInfo->VBInfo & DisableCRT2Display ) ) )
+        {
+            XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x00 , ~0xE0 , 0x20 ) ;   /* shampoo 0129 */
+            if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+            {
+                if ( !XGI_DisableChISLCD(pVBInfo) )
+                {
+                    if ( XGI_EnableChISLCD( pVBInfo) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+                        XGINew_SetRegAND( pVBInfo->Part4Port ,0x2A , 0x7F ) ;  	/* LVDS PLL power on */
+                }
+                XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x7F ) ;		/* LVDS Driver power on */
+            }
+        }
+
+        tempah = 0x00 ;
+
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            tempah = 0xc0 ;
+
+            if ( !( pVBInfo->VBInfo & SetSimuScanMode ) )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                    {
+                        tempah = tempah & 0x40;
+                        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                            tempah = tempah ^ 0xC0 ;
+
+                        if ( pVBInfo->SetFlag & DisableChB )
+                            tempah &= 0xBF ;
+
+                        if ( pVBInfo->SetFlag & DisableChA )
+                            tempah &= 0x7F ;
+
+                        if ( pVBInfo->SetFlag & EnableChB )
+                            tempah |= 0x40 ;
+
+                        if ( pVBInfo->SetFlag & EnableChA )
+                            tempah |= 0x80 ;
+                    }
+                }
+            }
+        }
+
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x1F , tempah ) ;          /* EnablePart4_1F */
+
+        if ( pVBInfo->SetFlag & Win9xDOSMode )
+        {
+            XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+            return ;
+        }
+
+        if ( !( pVBInfo->SetFlag & DisableChA ) )
+        {
+            XGI_VBLongWait( pVBInfo) ;
+            if ( !( pVBInfo->SetFlag & GatingCRT ) )
+            {
+                XGI_DisableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+                XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+                XGI_VBLongWait( pVBInfo) ;
+            }
+        }
+    }	/* 301 */
+    else 	/* LVDS */
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x1E , 0x20 ) ;      	/* enable CRT2 */
+
+
+
+        tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+        if ( !( tempah & 0x80 ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;	/* BVBDOENABLE = 1 */
+
+        XGINew_SetRegAND(pVBInfo->Part1Port,0x00,0x7F);
+        XGI_DisplayOn( HwDeviceExtension, pVBInfo);
+    } /* End of VB */
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !XGI_EnableChISLCD(pVBInfo) )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            {
+                if ( XGI_BacklightByDrv(pVBInfo) )
+                    return ;
+            }
+            else
+                return ;
+        }
+
+        if ( pVBInfo->LCDInfo & SetPWDEnable )
+        {
+            XGI_FirePWDEnable(pVBInfo) ;
+            return ;
+        }
+
+        XGI_SetPanelDelay( 2,pVBInfo ) ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempah = 0x01 ;
+            tempbl = 0xFE ;		/* turn on backlght */
+        }
+        else
+        {
+            tempbl = 0xF7 ;
+            tempah = 0x00 ;
+        }
+        XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempbx ,
+           tempah = 0 ,
+           tempbl = 0 ;
+
+    if ( pVBInfo->SetFlag == Win9xDOSMode )
+        return ;
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+        {
+            if ( !XGI_IsLCDON(pVBInfo) )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                    XGI_EnablePWD( pVBInfo) ;
+                else
+                {
+                    pVBInfo->LCDInfo &= ~SetPWDEnable ;
+                    XGI_DisablePWD(pVBInfo) ;
+                    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        tempbx = 0xFE ;  /* not 01h */
+                        tempax = 0 ;
+                    }
+                    else
+                    {
+                        tempbx = 0xF7 ;  /* not 08h */
+                        tempax = 0x08 ;
+                    }
+                    XGI_SetPanelPower( tempax , tempbx , pVBInfo) ;
+                    XGI_SetPanelDelay( 3,pVBInfo ) ;
+                }
+            }	/* end if(!XGI_IsLCDON(pVBInfo)) */
+        }
+    }
+
+/*  if ( CH7017 )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2toLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+        {
+            if ( !XGI_IsLCDON(pVBInfo) )
+            {
+                if ( DISCHARGE )
+                {
+                    tempbx = XGINew_GetCH7005( 0x61 ) ;
+                    if ( tempbx < 0x01 )   //first time we power up
+                        XGINew_SetCH7005( 0x0066 ) ;	//and disable power sequence
+                    else
+                        XGINew_SetCH7005( 0x5f66 ) ; //leave VDD on - disable power
+                }
+            }
+        }
+    }        */
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B| VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempah = 0x3F ;
+        if ( !( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                {
+                    tempah = 0x7F;			/* Disable Channel A */
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                        tempah = 0xBF ;		/* Disable Channel B */
+
+                    if ( pVBInfo->SetFlag & DisableChB )
+                        tempah &= 0xBF ;		/* force to disable Cahnnel */
+
+                    if ( pVBInfo->SetFlag & DisableChA )
+                        tempah &= 0x7F ;		/* Force to disable Channel B */
+                }
+            }
+        }
+
+        XGINew_SetRegAND( pVBInfo->Part4Port , 0x1F , tempah ) ;   /* disable part4_1f */
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( ( ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+                XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x80 ) ;  /* LVDS Driver power down */
+        }
+
+        if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) ) )
+        {
+            if ( pVBInfo->SetFlag & GatingCRT )
+                XGI_EnableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+            XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                XGINew_SetRegAND( pVBInfo->Part1Port , 0x1e , 0xdf ) ; 	/* Power down */
+        }
+
+        XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xdf ) ; 		/* disable TV as primary VGA swap */
+
+        if ( ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToDualEdge  ) ) )
+            XGINew_SetRegAND(pVBInfo->Part2Port,0x00,0xdf);
+
+        if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+        || ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; 	/* BScreenOff=1 */
+
+        if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+        || ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) || ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) )
+        {
+            tempah= XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ;   	/* save Part1 index 0 */
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x10 ) ; 	/* BTDAC = 1, avoid VB reset */
+            XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ;	/* disable CRT2 */
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;	/* restore Part1 index 0 */
+        }
+    }
+    else /* {301} */
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+        {
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; 	/* BScreenOff=1 */
+            XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ;	/* Disable CRT2 */
+            XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xDF ) ;	/* Disable TV asPrimary VGA swap */
+        }
+
+        if ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) )
+            XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+    }
+
+
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+        {
+            if ( pVBInfo->LCDInfo & SetPWDEnable )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                    XGI_BacklightByDrv(pVBInfo) ;
+                else
+                {
+                    XGI_SetPanelDelay( 4 ,pVBInfo) ;
+                    if ( pVBInfo->VBType & VB_XGI301LV )
+                    {
+                        tempbl = 0xFD ;
+                        tempah = 0x00 ;
+                    }
+                    else
+                    {
+                        tempbl = 0xFB ;
+                        tempah = 0x04 ;
+                    }
+                }
+            }
+            XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex */
+/* Input : */
+/* Output : */
+/* Description : bx 0 : ExtNTSC */
+/* 1 : StNTSC */
+/* 2 : ExtPAL */
+/* 3 : StPAL */
+/* 4 : ExtHiTV */
+/* 5 : StHiTV */
+/* 6 : Ext525i */
+/* 7 : St525i */
+/* 8 : Ext525p */
+/* 9 : St525p */
+/* A : Ext750p */
+/* B : St750p */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx = 0 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        tempbx = 2 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+        tempbx = 4 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+        tempbx = 6 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+        tempbx = 8 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+        tempbx = 10 ;
+    if ( pVBInfo->TVInfo & TVSimuMode )
+        tempbx++ ;
+
+    return tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OEM310Setting */
+/* Input : */
+/* Output : */
+/* Description : Customized Param. for 301 */
+/* --------------------------------------------------------------------- */
+void XGI_OEM310Setting( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->SetFlag & Win9xDOSMode )
+        return ;
+
+    /* GetPart1IO(); */
+    XGI_SetDelayComp(pVBInfo) ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        XGI_SetLCDCap(pVBInfo) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        /* GetPart2IO() */
+        XGI_SetPhaseIncr(pVBInfo) ;
+        XGI_SetYFilter( ModeNo , ModeIdIndex,pVBInfo ) ;
+        XGI_SetAntiFlicker( ModeNo , ModeIdIndex,pVBInfo ) ;
+
+        if ( pVBInfo->VBType&VB_XGI301)
+            XGI_SetEdgeEnhance( ModeNo , ModeIdIndex ,pVBInfo) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDelayComp */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetDelayComp( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    UCHAR  tempah ,
+           tempbl ,
+           tempbh ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToTV | SetCRT2ToRAMDAC ) )
+        {
+            tempbl = 0;
+            tempbh = 0;
+
+            index = XGI_GetTVPtrIndex(pVBInfo ) ;           /* Get TV Delay */
+            tempbl = pVBInfo->XGI_TVDelayList[ index ] ;
+
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                tempbl = pVBInfo->XGI_TVDelayList2[ index ] ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempbl = tempbl >> 4 ;
+/*
+            if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+                tempbl = CRT2Delay1 ;			// Get CRT2 Delay
+
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                tempbl = CRT2Delay2 ;
+*/
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            {
+                index = XGI_GetLCDCapPtr(pVBInfo) ; 		/* Get LCD Delay */
+                tempbh=pVBInfo->LCDCapList[ index ].LCD_DelayCompensation ;
+
+                if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                     tempbl = tempbh ;
+            }
+
+            tempbl  &= 0x0F ;
+            tempbh  &= 0xF0 ;
+            tempah = XGINew_GetReg1( pVBInfo->Part1Port , 0x2D ) ;
+
+            if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) )  /* Channel B */
+            {
+                tempah &= 0xF0 ;
+                tempah |= tempbl ;
+            }
+
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )		/* Channel A */
+            {
+                tempah &= 0x0F ;
+                tempah |= tempbh ;
+            }
+            XGINew_SetReg1(pVBInfo->Part1Port,0x2D,tempah);
+        }
+    }
+    else if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        tempbl = 0;
+        tempbh = 0;
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            tempah = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_DelayCompensation ;		/* / Get LCD Delay */
+            tempah &= 0x0f ;
+            tempah = tempah << 4 ;
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2D , 0x0f , tempah ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempcx ;
+
+    tempcx = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_Capability ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {        				/* 301LV/302LV only */
+            /* Set 301LV Capability */
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x24 , ( UCHAR )( tempcx & 0x1F ) ) ;
+	}
+        /* VB Driving */
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~( ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) >> 8 ) , ( USHORT )( ( tempcx & ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) ) >> 8 ) ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+            XGI_SetLCDCap_B( tempcx,pVBInfo ) ;
+        else if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            XGI_SetLCDCap_A( tempcx,pVBInfo ) ;
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( tempcx & EnableSpectrum )
+                SetSpectrum( pVBInfo) ;
+        }
+    }
+    else      /* LVDS,CH7017 */
+        XGI_SetLCDCap_A( tempcx, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_A */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+    if ( temp & LCDRGB18Bit )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x20 | ( tempcx & 0x00C0 ) ) ) ; /* Enable Dither */
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x80 ) ;
+    }
+    else
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x30 | ( tempcx & 0x00C0 ) ) ) ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x00 ) ;
+    }
+
+/*
+    if ( tempcx & EnableLCD24bpp )	// 24bits
+    {
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x30|(tempcx&0x00C0)) );
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x00);
+    }
+    else
+    {
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x20|(tempcx&0x00C0)) );//Enable Dither
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x80);
+    }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_B */
+/* Input : cx -> LCD Capability */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+    if ( tempcx & EnableLCD24bpp )	/* 24bits */
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x0c ) ) ;
+    else
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x18 ) ) ; /* Enable Dither */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : SetSpectrum */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void SetSpectrum( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+    XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x8F ) ;   /* disable down spectrum D[4] */
+    XGI_LongWait(pVBInfo) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x20 ) ;	 /* reset spectrum */
+    XGI_LongWait(pVBInfo) ;
+
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , pVBInfo->LCDCapList[ index ].Spectrum_31 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x32 , pVBInfo->LCDCapList[ index ].Spectrum_32 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x33 , pVBInfo->LCDCapList[ index ].Spectrum_33 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x34 , pVBInfo->LCDCapList[ index ].Spectrum_34 ) ;
+    XGI_LongWait(pVBInfo) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x40 ) ; /* enable spectrum */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetAntiFlicker */
+/* Input : */
+/* Output : */
+/* Description : Set TV Customized Param. */
+/* --------------------------------------------------------------------- */
+void XGI_SetAntiFlicker( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempah ;
+
+    if (pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+        return ;
+
+    tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+    tempbx &= 0xFE ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVFlickerIndex ;
+    }
+    else
+    {
+        index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVFlickerIndex ;
+    }
+
+    tempbx += index ;
+    tempah = TVAntiFlickList[ tempbx ] ;
+    tempah = tempah << 4 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0x8F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetEdgeEnhance */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetEdgeEnhance( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempah ;
+
+
+    tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+    tempbx &= 0xFE ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVEdgeIndex ;
+    }
+    else
+    {
+        index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVEdgeIndex ;
+    }
+
+    tempbx += index ;
+    tempah = TVEdgeList[ tempbx ] ;
+    tempah = tempah << 5 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPhaseIncr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetPhaseIncr( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    UCHAR tempcl ,
+          tempch ;
+
+    ULONG tempData ;
+
+    XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+    tempData = TVPhaseList[ tempbx ] ;
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x31 , ( USHORT )( tempData & 0x000000FF ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x32 , ( USHORT )( ( tempData & 0x0000FF00 ) >> 8 ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x33 , ( USHORT )( ( tempData & 0x00FF0000 ) >> 16 ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x34 , ( USHORT )( ( tempData & 0xFF000000 ) >> 24 ) ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetYFilter */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetYFilter( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempcl ,
+          tempch ,
+          tempal ,
+          *filterPtr ;
+
+    XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+
+    switch( tempbx )
+    {
+        case 0x00:
+        case 0x04:
+            filterPtr = NTSCYFilter1 ;
+            break ;
+
+        case 0x01:
+            filterPtr = PALYFilter1 ;
+            break ;
+
+        case 0x02:
+        case 0x05:
+        case 0x0D:
+            filterPtr = PALMYFilter1 ;
+            break ;
+
+        case 0x03:
+            filterPtr = PALNYFilter1 ;
+            break ;
+
+        case 0x08:
+        case 0x0C:
+            filterPtr = NTSCYFilter2 ;
+            break ;
+
+        case 0x0A:
+            filterPtr = PALMYFilter2 ;
+            break ;
+
+        case 0x0B:
+            filterPtr = PALNYFilter2 ;
+            break ;
+
+        case 0x09:
+            filterPtr = PALYFilter2 ;
+            break ;
+
+        default:
+            return ;
+    }
+
+    if ( ModeNo <= 0x13 )
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVYFilterIndex ;
+    else
+        tempal = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVYFilterIndex ;
+
+    if ( tempcl == 0 )
+        index = tempal * 4;
+    else
+        index = tempal * 7;
+
+    if ( ( tempcl == 0 ) && ( tempch == 1 ) )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+    }
+    else
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x48 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x49 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x4A , filterPtr[ index++ ] ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex2 */
+/* Input : */
+/* Output : bx 0 : NTSC */
+/* 1 : PAL */
+/* 2 : PALM */
+/* 3 : PALN */
+/* 4 : NTSC1024x768 */
+/* 5 : PAL-M 1024x768 */
+/* 6-7: reserved */
+/* cl 0 : YFilter1 */
+/* 1 : YFilter2 */
+/* ch 0 : 301A */
+/* 1 : 301B/302B/301LV/302LV */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo)
+{
+    *tempbx = 0 ;
+    *tempcl = 0 ;
+    *tempch = 0 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        *tempbx = 1 ;
+
+    if ( pVBInfo->TVInfo & SetPALMTV )
+        *tempbx = 2 ;
+
+    if ( pVBInfo->TVInfo & SetPALNTV )
+        *tempbx = 3 ;
+
+    if ( pVBInfo->TVInfo & NTSC1024x768 )
+    {
+        *tempbx = 4 ;
+        if ( pVBInfo->TVInfo & SetPALMTV )
+            *tempbx = 5 ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) || ( pVBInfo->TVInfo & TVSimuMode ) )
+        {
+            *tempbx += 8 ;
+            *tempcl += 1 ;
+        }
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        (*tempch)++ ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : Origin code for crt2group */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbl ;
+    SHORT  tempcl ;
+
+    UCHAR  tempah ;
+
+    /* XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , 0x00 ) ; // fix write part1 index 0 BTDRAM bit Bug */
+    tempah=0;
+    if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+    {
+        tempah=XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ;
+        tempah &= ~0x10 ;	/* BTRAMDAC */
+        tempah |=  0x40 ;	/* BTRAM */
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+        {
+            tempah=0x40;	/* BTDRAM */
+            if ( ModeNo > 0x13 )
+            {
+                tempcl = pVBInfo->ModeType ;
+                tempcl -= ModeVGA ;
+                if ( tempcl >= 0 )
+                {
+                    tempah = ( 0x008 >> tempcl ) ;	/* BT Color */
+                    if ( tempah == 0 )
+                        tempah = 1 ;
+                    tempah |= 0x040 ;
+                }
+            }
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+                tempah ^= 0x50 ;	/* BTDAC */
+        }
+    }
+
+/*	0210 shampoo
+    if ( pVBInfo->VBInfo & DisableCRT2Display )
+    {
+        tempah = 0 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+    if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+    {
+        tempcl = pVBInfo->ModeType ;
+        if ( ModeNo > 0x13 )
+        {
+            tempcl -= ModeVGA ;
+            if ( ( tempcl > 0 ) || ( tempcl == 0 ) )
+            {
+                tempah=(0x008>>tempcl) ;
+                if ( tempah == 0 )
+                    tempah = 1 ;
+                tempah |= 0x040;
+            }
+        }
+        else
+        {
+            tempah = 0x040 ;
+        }
+
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            tempah = ( tempah ^ 0x050 ) ;
+        }
+    }
+*/
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+    tempah = 0x08 ;
+    tempbl = 0xf0 ;
+
+    if ( pVBInfo->VBInfo & DisableCRT2Display )
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+    else
+    {
+        tempah = 0x00 ;
+        tempbl = 0xff ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            if ( ( pVBInfo->VBInfo & SetCRT2ToLCDA ) && ( !( pVBInfo->VBInfo & SetSimuScanMode ) ) )
+            {
+                tempbl &= 0xf7 ;
+                tempah |= 0x01 ;
+                XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+            }
+            else
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    tempbl &= 0xf7 ;
+                    tempah |= 0x01 ;
+                }
+
+                if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+                {
+                    tempbl &= 0xf8 ;
+                    tempah = 0x01 ;
+
+                    if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+                        tempah |= 0x02 ;
+
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                    {
+                        tempah = tempah ^ 0x05 ;
+                        if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+                            tempah = tempah ^ 0x01 ;
+                    }
+
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+                        tempah |= 0x08 ;
+                    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+                }
+                else
+                    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+            }
+        }
+        else
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        tempah &= ( ~0x08 ) ;
+        if ( ( pVBInfo->ModeType == ModeVGA ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+        {
+            tempah |= 0x010 ;
+        }
+        tempah |= 0x080 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            /* if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) */
+            /* { */
+            tempah |= 0x020 ;
+            if ( ModeNo > 0x13 )
+            {
+                if ( pVBInfo->VBInfo & DriverMode )
+                    tempah = tempah ^ 0x20 ;
+            }
+        /* } */
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x0BF , tempah ) ;
+        tempah = 0 ;
+
+        if ( pVBInfo->LCDInfo & SetLCDDualLink )
+            tempah |= 0x40 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            /* if ( ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) && ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) ) */
+            /* { */
+                if ( pVBInfo->TVInfo & RPLLDIV2XO )
+                    tempah |= 0x40 ;
+            /* } */
+        }
+
+        if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            tempah |= 0x80 ;
+
+        if ( pVBInfo->LCDResInfo == Panel1280x960 )
+            tempah |= 0x80 ;
+
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0C , tempah ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempah = 0 ;
+        tempbl = 0xfb ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+        {
+            tempbl=0xff;
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                tempah |= 0x04 ; /* shampoo 0129 */
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x13 , tempbl , tempah ) ;
+        tempah = 0x00 ;
+        tempbl = 0xcf ;
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempah |= 0x30 ;
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2c , tempbl , tempah ) ;
+        tempah = 0 ;
+        tempbl = 0x3f ;
+
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempah |= 0xc0 ;
+        }
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , tempbl , tempah ) ;
+    }
+
+    tempah = 0 ;
+    tempbl = 0x7f ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+    {
+        tempbl = 0xff ;
+        if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+            tempah |= 0x80 ;
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x23 , tempbl , tempah ) ;
+
+    if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->LCDInfo & SetLCDDualLink )
+        {
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x20 ) ;
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x34 , 0x10 ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_CloseCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_CloseCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    tempbx = 0 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        tempbx = 0x08A0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OpenCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_OpenCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    tempbx = 0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRAMDAC2DATA */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax ,
+           tempbx ,
+           temp1 ,
+           temp2 ,
+           modeflag = 0 ,
+           tempcx ,
+           StandTableIndex ,
+           CRT1Index ;
+
+    pVBInfo->RVBHCMAX = 1 ;
+    pVBInfo->RVBHCFACT = 1 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+        tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 0 ] ;
+        tempbx = pVBInfo->StandTable[StandTableIndex ].CRTC[ 6 ] ;
+        temp1 = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 0 ] ;
+        temp2 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] ;
+	tempax = ( temp1 & 0xFF ) | ( ( temp2 & 0x03 ) << 8 ) ;
+        tempbx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 8 ] ;
+        tempcx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] << 8 ;
+	tempcx &= 0x0100 ;
+	tempcx = tempcx << 2 ;
+	tempbx |= tempcx;
+        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+    }
+
+    if ( temp1 & 0x01 )
+        tempbx |= 0x0100 ;
+
+    if ( temp1 & 0x20 )
+        tempbx |= 0x0200 ;
+    tempax += 5 ;
+
+    if ( modeflag & Charx8Dot )
+        tempax *= 8 ;
+    else
+        tempax *= 9 ;
+
+    pVBInfo->VGAHT = tempax ;
+    pVBInfo->HT = tempax ;
+    tempbx++ ;
+    pVBInfo->VGAVT = tempbx ;
+    pVBInfo->VT = tempbx ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetColorDepth */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetColorDepth(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT ColorDepth[ 6 ] = { 1 , 2 , 4 , 4 , 6 , 8 } ;
+    SHORT  index ;
+    USHORT modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    index=(modeflag&ModeInfoFlag)-ModeEGA;
+
+    if ( index < 0 )
+        index = 0 ;
+
+    return( ColorDepth[ index ] ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UnLockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UnLockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2f , 0xFF , 0x01 ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2F , 0xFE , 0x00 ) ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableCRT2( PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1E , 0xFF , 0x20 ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ,
+           j ;
+
+    ULONG temp ,
+          flag ;
+
+    flag = 0 ;
+//printk("XGINew_LCD_Wait_Time");
+//return;
+    for( i = 0 ; i < DelayTime ; i++ )
+    {
+        for( j = 0 ; j < 66 ; j++ )
+        {
+
+            temp =  XGINew_GetReg3( 0x61 ) ;
+
+            //temp &= 0x10000000;
+            temp &= 0x10;
+            if ( temp == flag )
+                continue ;
+
+            flag = temp ;
+        }
+    }
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BridgeIsOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT flag ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        return( 1 ) ;
+    }
+    else
+    {
+        flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+        if ( ( flag == 1 ) || ( flag == 2 ) )
+            return( 1 ) ;	/* 301b */
+        else
+            return( 0 ) ;
+    }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LongWait(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ;
+
+    i = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+
+    if ( !( i & 0xC0 ) )
+    {
+        for( i = 0 ; i < 0xFFFF ; i++ )
+        {
+            if ( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+                break ;
+        }
+
+        for( i = 0 ; i < 0xFFFF ; i++ )
+        {
+            if ( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+                break ;
+	}
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VBLongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_VBLongWait( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempal ,
+           temp ,
+           i ,
+           j ;
+return ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        temp = 0 ;
+        for( i = 0 ; i < 3 ; i++ )
+        {
+            for( j = 0 ; j < 100 ; j++ )
+            {
+                tempal = XGINew_GetReg2( pVBInfo->P3da ) ;
+                if ( temp & 0x01 )
+                {			/* VBWaitMode2 */
+                    if ( ( tempal & 0x08 ) )
+                    {
+                        continue ;
+                    }
+
+                    if ( !( tempal & 0x08 ) )
+                    {
+                        break ;
+                    }
+                }
+                else
+                {			/* VBWaitMode1 */
+                    if ( !( tempal & 0x08 ) )
+                    {
+                        continue ;
+                    }
+
+                    if ( ( tempal & 0x08 ) )
+                    {
+                        break ;
+                    }
+                }
+            }
+            temp = temp ^ 0x01 ;
+        }
+    }
+    else
+    {
+        XGI_LongWait(pVBInfo) ;
+    }
+    return ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAHT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVGAHT2( PVB_DEVICE_INFO pVBInfo )
+{
+    ULONG tempax ,
+          tempbx ;
+
+    tempbx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) * pVBInfo->RVBHCMAX ) & 0xFFFF ;
+    tempax = ( pVBInfo->VT - pVBInfo->VDE ) * pVBInfo->RVBHCFACT ;
+    tempax = ( tempax * pVBInfo->HT ) /tempbx ;
+
+    return( ( USHORT )tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLK2Ptr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVCLK2Ptr( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ;
+
+    USHORT LCDXlat1VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    USHORT LCDXlat2VCLK[ 4 ] = { VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 } ;
+    USHORT LVDSXlat1VCLK[ 4 ] = { VCLK40 , VCLK40 , VCLK40 , VCLK40 } ;
+    USHORT LVDSXlat2VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    USHORT LVDSXlat3VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+
+    USHORT CRT2Index , VCLKIndex ;
+    USHORT modeflag , resinfo ;
+    UCHAR *CHTVVCLKPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+        CRT2Index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;     /* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT2Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        CRT2Index = CRT2Index >> 6 ;        /*  for LCD */
+        if ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) )	 /*301b*/
+        {
+            if ( pVBInfo->LCDResInfo != Panel1024x768 )
+            {
+                VCLKIndex = LCDXlat2VCLK[ CRT2Index ] ;
+            }
+            else
+            {
+                 VCLKIndex = LCDXlat1VCLK[ CRT2Index ] ;
+            }
+        }
+        else	/* for TV */
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+                {
+                    if ( pVBInfo->SetFlag & RPLLDIV2XO )
+                    {
+                        VCLKIndex = HiTVVCLKDIV2 ;
+
+
+                            VCLKIndex += 25 ;
+
+                    }
+                    else
+                    {
+                        VCLKIndex = HiTVVCLK ;
+
+
+                            VCLKIndex += 25 ;
+
+                    }
+
+                    if ( pVBInfo->SetFlag & TVSimuMode )
+                    {
+                        if( modeflag & Charx8Dot )
+                        {
+                            VCLKIndex = HiTVSimuVCLK ;
+
+
+                                VCLKIndex += 25 ;
+
+                        }
+                        else
+                        {
+                            VCLKIndex = HiTVTextVCLK ;
+
+
+                                VCLKIndex += 25 ;
+
+                        }
+                    }
+
+                    if ( pVBInfo->VBType & VB_XGI301LV )	/* 301lv */
+                    {
+                        if ( !( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+                        {
+                            VCLKIndex = YPbPr750pVCLK ;
+                            if ( !( pVBInfo->VBExtInfo == VB_YPbPr750p ) )
+                            {
+                                VCLKIndex = YPbPr525pVCLK ;
+                                if ( !( pVBInfo->VBExtInfo == VB_YPbPr525p ) )
+                                {
+                                    VCLKIndex = YPbPr525iVCLK_2 ;
+                                    if ( !( pVBInfo->SetFlag & RPLLDIV2XO ) )
+                                        VCLKIndex = YPbPr525iVCLK ;
+                                }
+                            }
+                        }
+                    }
+                }
+                else
+                {
+                    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                    {
+                        if ( pVBInfo->SetFlag & RPLLDIV2XO )
+			{
+                            VCLKIndex = TVVCLKDIV2 ;
+
+
+                            VCLKIndex += 25 ;
+
+                        }
+                        else
+                        {
+                            VCLKIndex = TVVCLK ;
+
+
+                            VCLKIndex += 25 ;
+
+                        }
+                    }
+                }
+            }
+            else
+            {	/* for CRT2 */
+                VCLKIndex = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;	/* Port 3cch */
+		VCLKIndex = ( ( VCLKIndex >> 2 ) & 0x03 ) ;
+                if ( ModeNo > 0x13 )
+                {
+                    VCLKIndex = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;	/* di+Ext_CRTVCLK */
+                    VCLKIndex &= IndexMask ;
+                }
+            }
+        }
+    }
+    else
+    {		/* LVDS */
+        if ( ModeNo <= 0x13 )
+            VCLKIndex = CRT2Index ;
+	else
+	    VCLKIndex = CRT2Index ;
+
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+            {
+                VCLKIndex &= 0x1f ;
+		tempbx = 0 ;
+
+                if ( pVBInfo->VBInfo & SetPALTV )
+                    tempbx += 2 ;
+
+                if ( pVBInfo->VBInfo & SetCHTVOverScan )
+                    tempbx += 1 ;
+
+                switch( tempbx )
+                {
+                    case 0:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+                        break ;
+                    case 1:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+                        break;
+                    case 2:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+                        break ;
+                    case 3:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+                        break ;
+                    default:
+                        break ;
+                }
+
+                VCLKIndex = CHTVVCLKPtr[ VCLKIndex ] ;
+            }
+        }
+        else
+        {
+            VCLKIndex = VCLKIndex >> 6 ;
+            if ( ( pVBInfo->LCDResInfo == Panel800x600 ) || ( pVBInfo->LCDResInfo == Panel320x480 ) )
+                VCLKIndex = LVDSXlat1VCLK[ VCLKIndex ] ;
+            else if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+                VCLKIndex = LVDSXlat2VCLK[ VCLKIndex ] ;
+            else
+                VCLKIndex = LVDSXlat3VCLK[ VCLKIndex ] ;
+        }
+    }
+    /* VCLKIndex = VCLKIndex&IndexMask ; */
+
+
+
+    return( VCLKIndex ) ;
+}
+
diff --git a/drivers/staging/xgifb/vb_setmode.h b/drivers/staging/xgifb/vb_setmode.h
new file mode 100644
index 00000000000..09753d70666
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.h
@@ -0,0 +1,40 @@
+#ifndef  _VBSETMODE_
+#define  _VBSETMODE_
+
+extern   void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO);
+extern   void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_LongWait( PVB_DEVICE_INFO );
+extern   void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO,  PVB_DEVICE_INFO  );
+extern   void     XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void  	  XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern   void     XGI_DisplayOn( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern   void     XGI_GetVBType(PVB_DEVICE_INFO);
+extern   void     XGI_SenseCRT1(PVB_DEVICE_INFO );
+extern   void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+extern   void     XGI_SetCRT1Offset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_WaitDisply( PVB_DEVICE_INFO );
+extern   USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+
+extern   BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+
+extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_BridgeIsOn( PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO);
+extern   USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+
+extern   void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern   void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern   USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo);
+
+#endif
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
new file mode 100644
index 00000000000..bb25c0e2785
--- /dev/null
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -0,0 +1,534 @@
+#ifndef _VB_STRUCT_
+#define _VB_STRUCT_
+
+#ifdef _INITNEW_
+#define EXTERN
+#else
+#define EXTERN extern
+#endif
+
+
+
+
+typedef struct _XGI_PanelDelayTblStruct
+{
+ UCHAR timer[2];
+} XGI_PanelDelayTblStruct;
+
+typedef struct _XGI_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LCDDataStruct;
+
+
+typedef struct _XGI_LVDSCRT1HDataStruct
+{
+ UCHAR Reg[8];
+} XGI_LVDSCRT1HDataStruct;
+typedef struct _XGI_LVDSCRT1VDataStruct
+{
+ UCHAR Reg[7];
+} XGI_LVDSCRT1VDataStruct;
+
+
+typedef struct _XGI_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+ UCHAR RY1COE;
+ UCHAR RY2COE;
+ UCHAR RY3COE;
+ UCHAR RY4COE;
+} XGI_TVDataStruct;
+
+typedef struct _XGI_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LVDSDataStruct;
+
+typedef struct _XGI_LVDSDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDVDES;
+} XGI_LVDSDesStruct;
+
+typedef struct _XGI_LVDSCRT1DataStruct
+{
+ UCHAR CR[15];
+} XGI_LVDSCRT1DataStruct;
+
+/*add for LCDA*/
+
+
+typedef struct _XGI_StStruct
+{
+ UCHAR St_ModeID;
+ USHORT St_ModeFlag;
+ UCHAR St_StTableIndex;
+ UCHAR St_CRT2CRTC;
+ UCHAR St_CRT2CRTC2;
+ UCHAR St_ResInfo;
+ UCHAR VB_StTVFlickerIndex;
+ UCHAR VB_StTVEdgeIndex;
+ UCHAR VB_StTVYFilterIndex;
+} XGI_StStruct;
+
+typedef struct _XGI_StandTableStruct
+{
+ UCHAR CRT_COLS;
+ UCHAR ROWS;
+ UCHAR CHAR_HEIGHT;
+ USHORT CRT_LEN;
+ UCHAR SR[4];
+ UCHAR MISC;
+ UCHAR CRTC[0x19];
+ UCHAR ATTR[0x14];
+ UCHAR GRC[9];
+} XGI_StandTableStruct;
+
+typedef struct _XGI_ExtStruct
+{
+ UCHAR Ext_ModeID;
+ USHORT Ext_ModeFlag;
+ USHORT Ext_ModeInfo;
+ USHORT Ext_Point;
+ USHORT Ext_VESAID;
+ UCHAR Ext_VESAMEMSize;
+ UCHAR Ext_RESINFO;
+ UCHAR VB_ExtTVFlickerIndex;
+ UCHAR VB_ExtTVEdgeIndex;
+ UCHAR VB_ExtTVYFilterIndex;
+ UCHAR REFindex;
+} XGI_ExtStruct;
+
+typedef struct _XGI_Ext2Struct
+{
+ USHORT Ext_InfoFlag;
+ UCHAR Ext_CRT1CRTC;
+ UCHAR Ext_CRTVCLK;
+ UCHAR Ext_CRT2CRTC;
+ UCHAR Ext_CRT2CRTC2;
+ UCHAR  ModeID;
+ USHORT XRes;
+ USHORT YRes;
+ /* USHORT ROM_OFFSET; */
+} XGI_Ext2Struct;
+
+
+typedef struct _XGI_MCLKDataStruct
+{
+ UCHAR SR28,SR29,SR2A;
+ USHORT CLOCK;
+} XGI_MCLKDataStruct;
+
+typedef struct _XGI_ECLKDataStruct
+{
+ UCHAR SR2E,SR2F,SR30;
+ USHORT CLOCK;
+} XGI_ECLKDataStruct;
+
+typedef struct _XGI_VCLKDataStruct
+{
+ UCHAR SR2B,SR2C;
+ USHORT CLOCK;
+} XGI_VCLKDataStruct;
+
+typedef struct _XGI_VBVCLKDataStruct
+{
+ UCHAR Part4_A,Part4_B;
+ USHORT CLOCK;
+} XGI_VBVCLKDataStruct;
+
+typedef struct _XGI_StResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+} XGI_StResInfoStruct;
+
+typedef struct _XGI_ModeResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+ UCHAR  XChar;
+ UCHAR  YChar;
+} XGI_ModeResInfoStruct;
+
+typedef struct _XGI_LCDNBDesStruct
+{
+  UCHAR NB[12];
+} XGI_LCDNBDesStruct;
+ /*add for new UNIVGABIOS*/
+typedef struct _XGI_LCDDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI_LCDDesStruct;
+
+typedef struct _XGI_LCDDataTablStruct
+{
+ UCHAR  PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_LCDDataTablStruct;
+
+typedef struct _XGI_TVTablDataStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_TVDataTablStruct;
+
+typedef struct _XGI330_LCDDesDataStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI330_LCDDataDesStruct;
+
+
+typedef struct _XGI330_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LVDSDataStruct;
+
+typedef struct _XGI330_LCDDesDataStruct2
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+ USHORT LCDHSync;
+ USHORT LCDVSync;
+} XGI330_LCDDataDesStruct2;
+
+typedef struct _XGI330_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LCDDataStruct;
+
+
+typedef struct _XGI330_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+} XGI330_TVDataStruct;
+
+typedef struct _XGI330_LCDDataTablStruct
+{
+ UCHAR  PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_LCDDataTablStruct;
+
+typedef struct _XGI330_TVDataTablStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_TVDataTablStruct;
+
+
+typedef struct _XGI330_CHTVDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_CHTVDataStruct;
+
+typedef struct _XGI_TimingHStruct
+{
+  UCHAR data[8];
+} XGI_TimingHStruct;
+
+typedef struct _XGI_TimingVStruct
+{
+  UCHAR data[7];
+} XGI_TimingVStruct;
+
+typedef struct _XGI_CH7007TV_TimingHStruct
+{
+  UCHAR data[10];
+} XGI_CH7007TV_TimingHStruct;
+
+typedef struct _XGI_CH7007TV_TimingVStruct
+{
+  UCHAR data[10];
+} XGI_CH7007TV_TimingVStruct;
+
+typedef struct _XGI_XG21CRT1Struct
+{
+ UCHAR ModeID,CR02,CR03,CR15,CR16;
+} XGI_XG21CRT1Struct;
+
+typedef struct _XGI330_CHTVRegDataStruct
+{
+ UCHAR Reg[16];
+} XGI330_CHTVRegDataStruct;
+
+typedef struct _XGI330_LCDCapStruct
+{
+ 		UCHAR      LCD_ID;
+                USHORT     LCD_Capability;
+                UCHAR      LCD_SetFlag;
+                UCHAR      LCD_DelayCompensation;
+                UCHAR      LCD_HSyncWidth;
+                UCHAR      LCD_VSyncWidth;
+                UCHAR      LCD_VCLK;
+                UCHAR      LCDA_VCLKData1;
+                UCHAR      LCDA_VCLKData2;
+                UCHAR      LCUCHAR_VCLKData1;
+                UCHAR      LCUCHAR_VCLKData2;
+                UCHAR      PSC_S1;
+                UCHAR      PSC_S2;
+                UCHAR      PSC_S3;
+                UCHAR      PSC_S4;
+                UCHAR      PSC_S5;
+                UCHAR      PWD_2B;
+                UCHAR      PWD_2C;
+                UCHAR      PWD_2D;
+                UCHAR      PWD_2E;
+                UCHAR      PWD_2F;
+                UCHAR      Spectrum_31;
+                UCHAR      Spectrum_32;
+                UCHAR      Spectrum_33;
+                UCHAR      Spectrum_34;
+} XGI330_LCDCapStruct;
+
+typedef struct _XGI21_LVDSCapStruct
+{
+                USHORT     LVDS_Capability;
+                USHORT     LVDSHT;
+                USHORT     LVDSVT;
+                USHORT     LVDSHDE;
+                USHORT     LVDSVDE;
+                USHORT     LVDSHFP;
+                USHORT     LVDSVFP;
+                USHORT     LVDSHSYNC;
+                USHORT     LVDSVSYNC;
+                UCHAR      VCLKData1;
+                UCHAR      VCLKData2;
+                UCHAR      PSC_S1;
+                UCHAR      PSC_S2;
+                UCHAR      PSC_S3;
+                UCHAR      PSC_S4;
+                UCHAR      PSC_S5;
+} XGI21_LVDSCapStruct;
+
+typedef struct _XGI_CRT1TableStruct
+{
+  UCHAR CR[16];
+} XGI_CRT1TableStruct;
+
+
+typedef struct _XGI330_VCLKDataStruct
+{
+    UCHAR SR2B,SR2C;
+    USHORT CLOCK;
+} XGI330_VCLKDataStruct;
+
+typedef struct _XGI301C_Tap4TimingStruct
+{
+    USHORT DE;
+    UCHAR  Reg[64];   /* C0-FF */
+} XGI301C_Tap4TimingStruct;
+
+typedef struct _XGI_New_StandTableStruct
+{
+	UCHAR  CRT_COLS;
+	UCHAR  ROWS;
+	UCHAR  CHAR_HEIGHT;
+	USHORT CRT_LEN;
+	UCHAR  SR[4];
+	UCHAR  MISC;
+	UCHAR  CRTC[0x19];
+	UCHAR  ATTR[0x14];
+	UCHAR  GRC[9];
+} XGI_New_StandTableStruct;
+
+typedef UCHAR DRAM8Type[8];
+typedef UCHAR DRAM4Type[4];
+typedef UCHAR DRAM32Type[32];
+typedef UCHAR DRAM2Type[2];
+
+typedef struct _VB_DEVICE_INFO  VB_DEVICE_INFO;
+typedef VB_DEVICE_INFO *	PVB_DEVICE_INFO;
+
+struct _VB_DEVICE_INFO
+{
+    BOOLEAN  ISXPDOS;
+    ULONG   P3c4,P3d4,P3c0,P3ce,P3c2,P3cc;
+    ULONG   P3ca,P3c6,P3c7,P3c8,P3c9,P3da;
+    ULONG   Part0Port,Part1Port,Part2Port;
+    ULONG   Part3Port,Part4Port,Part5Port;
+    USHORT   RVBHCFACT,RVBHCMAX,RVBHRS;
+    USHORT   VGAVT,VGAHT,VGAVDE,VGAHDE;
+    USHORT   VT,HT,VDE,HDE;
+    USHORT   LCDHRS,LCDVRS,LCDHDES,LCDVDES;
+
+    USHORT   ModeType;
+    USHORT   IF_DEF_LVDS,IF_DEF_TRUMPION,IF_DEF_DSTN;/* ,IF_DEF_FSTN; add for dstn */
+    USHORT   IF_DEF_CRT2Monitor,IF_DEF_VideoCapture;
+    USHORT   IF_DEF_LCDA,IF_DEF_CH7017,IF_DEF_YPbPr,IF_DEF_ScaleLCD,IF_DEF_OEMUtil,IF_DEF_PWD;
+    USHORT   IF_DEF_ExpLink;
+    USHORT   IF_DEF_CH7005,IF_DEF_HiVision;
+    USHORT   IF_DEF_CH7007; /* Billy 2007/05/03 */
+    USHORT   LCDResInfo,LCDTypeInfo, VBType;/*301b*/
+    USHORT   VBInfo,TVInfo,LCDInfo, Set_VGAType;
+    USHORT   VBExtInfo;/*301lv*/
+    USHORT   SetFlag;
+    USHORT   NewFlickerMode;
+    USHORT   SelectCRT2Rate;
+
+    PUCHAR ROMAddr;
+    PUCHAR FBAddr;
+    ULONG BaseAddr;
+    ULONG RelIO;
+
+    DRAM4Type  *CR6B;
+    DRAM4Type  *CR6E;
+    DRAM32Type *CR6F;
+    DRAM2Type  *CR89;
+
+    DRAM8Type  *SR15; /* pointer : point to array */
+    DRAM8Type  *CR40;
+    UCHAR  *pSoftSetting;
+    UCHAR  *pOutputSelect;
+
+    USHORT *pRGBSenseData;
+    USHORT *pRGBSenseData2; /*301b*/
+    USHORT *pVideoSenseData;
+    USHORT *pVideoSenseData2;
+    USHORT *pYCSenseData;
+    USHORT *pYCSenseData2;
+
+    UCHAR  *pSR07;
+    UCHAR  *CR49;
+    UCHAR  *pSR1F;
+    UCHAR  *AGPReg;
+    UCHAR  *SR16;
+    UCHAR  *pSR21;
+    UCHAR  *pSR22;
+    UCHAR  *pSR23;
+    UCHAR  *pSR24;
+    UCHAR  *SR25;
+    UCHAR  *pSR31;
+    UCHAR  *pSR32;
+    UCHAR  *pSR33;
+    UCHAR  *pSR36;      /* alan 12/07/2006 */
+    UCHAR  *pCRCF;
+    UCHAR  *pCRD0;      /* alan 12/07/2006 */
+    UCHAR  *pCRDE;      /* alan 12/07/2006 */
+    UCHAR  *pCR8F;      /* alan 12/07/2006 */
+    UCHAR  *pSR40;      /* alan 12/07/2006 */
+    UCHAR  *pSR41;      /* alan 12/07/2006 */
+    UCHAR  *pDVOSetting;
+    UCHAR  *pCR2E;
+    UCHAR  *pCR2F;
+    UCHAR  *pCR46;
+    UCHAR  *pCR47;
+    UCHAR  *pCRT2Data_1_2;
+    UCHAR  *pCRT2Data_4_D;
+    UCHAR  *pCRT2Data_4_E;
+    UCHAR  *pCRT2Data_4_10;
+    XGI_MCLKDataStruct  *MCLKData;
+    XGI_ECLKDataStruct  *ECLKData;
+
+    UCHAR   *XGI_TVDelayList;
+    UCHAR   *XGI_TVDelayList2;
+    UCHAR   *CHTVVCLKUNTSC;
+    UCHAR   *CHTVVCLKONTSC;
+    UCHAR   *CHTVVCLKUPAL;
+    UCHAR   *CHTVVCLKOPAL;
+    UCHAR   *NTSCTiming;
+    UCHAR   *PALTiming;
+    UCHAR   *HiTVExtTiming;
+    UCHAR   *HiTVSt1Timing;
+    UCHAR   *HiTVSt2Timing;
+    UCHAR   *HiTVTextTiming;
+    UCHAR   *YPbPr750pTiming;
+    UCHAR   *YPbPr525pTiming;
+    UCHAR   *YPbPr525iTiming;
+    UCHAR   *HiTVGroup3Data;
+    UCHAR   *HiTVGroup3Simu;
+    UCHAR   *HiTVGroup3Text;
+    UCHAR   *Ren525pGroup3;
+    UCHAR   *Ren750pGroup3;
+    UCHAR   *ScreenOffset;
+    UCHAR   *pXGINew_DRAMTypeDefinition;
+    UCHAR   *pXGINew_I2CDefinition ;
+    UCHAR   *pXGINew_CR97 ;
+
+    XGI330_LCDCapStruct  *LCDCapList;
+    XGI21_LVDSCapStruct  *XG21_LVDSCapList;
+
+    XGI_TimingHStruct  *TimingH;
+    XGI_TimingVStruct  *TimingV;
+
+    XGI_StStruct          *SModeIDTable;
+    XGI_StandTableStruct  *StandTable;
+    XGI_ExtStruct         *EModeIDTable;
+    XGI_Ext2Struct        *RefIndex;
+    /* XGINew_CRT1TableStruct *CRT1Table; */
+    XGI_CRT1TableStruct    *XGINEWUB_CRT1Table;
+    XGI_VCLKDataStruct    *VCLKData;
+    XGI_VBVCLKDataStruct  *VBVCLKData;
+    XGI_StResInfoStruct   *StResInfo;
+    XGI_ModeResInfoStruct *ModeResInfo;
+    XGI_XG21CRT1Struct	  *UpdateCRT1;
+};  /* _VB_DEVICE_INFO */
+
+
+typedef struct
+{
+    USHORT    Horizontal_ACTIVE;
+    USHORT    Horizontal_FP;
+    USHORT    Horizontal_SYNC;
+    USHORT    Horizontal_BP;
+    USHORT    Vertical_ACTIVE;
+    USHORT    Vertical_FP;
+    USHORT    Vertical_SYNC;
+    USHORT    Vertical_BP;
+    double    DCLK;
+    UCHAR     FrameRate;
+    UCHAR     Interlace;
+    USHORT    Margin;
+} TimingInfo;
+
+#define _VB_STRUCT_
+#endif /* _VB_STRUCT_ */
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
new file mode 100644
index 00000000000..781caefc56b
--- /dev/null
+++ b/drivers/staging/xgifb/vb_table.h
@@ -0,0 +1,4406 @@
+#define  Tap4
+
+
+XGI_MCLKDataStruct XGI330New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_MCLKDataStruct XGI340New_MCLKData[]=
+{
+ { 0x16,0x01,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_MCLKDataStruct XGI27New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_ECLKDataStruct XGI330_ECLKData[]=
+{
+ { 0x7c,0x08,0x01,200},
+ { 0x7c,0x08,0x01,200},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_ECLKDataStruct XGI340_ECLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x55,0x84,0x01,123},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+
+
+UCHAR XGI340_SR13[4][8]={
+{0x35,0x45,0xb1,0x00,0x00,0x00,0x00,0x00},/* SR13 */
+{0x41,0x51,0x5c,0x00,0x00,0x00,0x00,0x00},/* SR14 */
+{0x31,0x42,0x42,0x00,0x00,0x00,0x00,0x00},/* SR18 */
+{0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00}/* SR1B */
+};
+
+UCHAR XGI340_cr41[24][8]=
+{{0x20,0x50,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0xa4,0xa4,0x00,0x00,0x00,0x00,0x00},
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x44,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x48,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x0a,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x44,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x10,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x11,0x0a,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x05,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x40,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xB5,0x13,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x67,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xcc,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0x00,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+#if 0
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x60,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0x04,0x44,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0x04,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0x03,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0xa4,0x1C,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x48,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x77,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x88,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x44,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x44,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x0A,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x0C,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x03,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+#endif
+UCHAR XGI340_CR6B[8][4]={
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6E[8][4]={
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6F[8][32]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR89[8][2]={
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00}
+};
+			 /* CR47,CR48,CR49,CR4A,CR4B,CR4C,CR70,CR71,CR74,CR75,CR76,CR77 */
+UCHAR XGI340_AGPReg[12]={0x28,0x23,0x00,0x20,0x00,0x20,0x00,0x05,0xd0,0x10,0x10,0x00};
+
+UCHAR XGI340_SR16[4]={0x03,0x83,0x03,0x83};
+
+UCHAR XGI330_SR15_1[8][8]={
+{0x0,0x0,0x00,0x00,0x20,0x20,0x00,0x00},
+{0x5,0x15,0x15,0x15,0x15,0x15,0x00,0x00},
+{0xba,0xba,0xba,0xba,0xBA,0xBA,0x00,0x00},
+{0x55,0x57,0x57,0xAB,0xAB,0xAB,0x00,0x00},
+{0x60,0x34,0x34,0x34,0x34,0x34,0x00,0x00},
+{0x0,0x80,0x80,0x80,0x83,0x83,0x00,0x00},
+{0x50,0x50,0x50,0x3C,0x3C,0x3C,0x00,0x00},
+{0x0,0xa5,0xfb,0xf6,0xF6,0xF6,0x00,0x00}
+};
+
+UCHAR XGI330_cr40_1[15][8]={
+{0x66,0x40,0x40,0x28,0x24,0x24,0x00,0x00},
+{0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00},
+{0x00,0xf0,0xf0,0xf0,0xF0,0xF0,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x10,0x10,0x10,0x10,0x20,0x20,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x88,0x88,0x88,0xAA,0xAC,0xAC,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x77,0x77,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0xA2,0x00,0x00,0xA2,0xA2,0x00,0x00},
+};
+
+UCHAR XGI330_sr25[]={0x00,0x0};
+UCHAR XGI330_sr31=0xc0;
+UCHAR XGI330_sr32=0x11;
+UCHAR XGI330_SR33=0x00;
+UCHAR XG40_CRCF=0x13;
+UCHAR XG40_DRAMTypeDefinition=0xFF ;
+
+XGI_StStruct XGI330_SModeIDTable[]=
+{
+ {0x01,0x9208,0x01,0x00,0x10,0x00,0x00,0x01,0x00},
+ {0x01,0x1210,0x14,0x01,0x00,0x01,0x00,0x01,0x00},
+ {0x01,0x1010,0x17,0x02,0x11,0x00,0x00,0x01,0x01},
+ {0x03,0x8208,0x03,0x00,0x14,0x00,0x00,0x01,0x02},
+ {0x03,0x0210,0x16,0x01,0x04,0x01,0x00,0x01,0x02},
+ {0x03,0x0010,0x18,0x02,0x15,0x00,0x00,0x01,0x03},
+ {0x05,0x9209,0x05,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x06,0x8209,0x06,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x07,0x0000,0x07,0x03,0x05,0x03,0x00,0x01,0x03},
+ {0x07,0x0000,0x19,0x02,0x15,0x02,0x00,0x01,0x03},
+ {0x0d,0x920a,0x0d,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x0e,0x820a,0x0e,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x0f,0x0202,0x11,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x10,0x0212,0x12,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x11,0x0212,0x1a,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x12,0x0212,0x1b,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x13,0x021b,0x1c,0x00,0x14,0x00,0x00,0x00,0x04},
+ {0x12,0x0010,0x18,0x02,0x24,0x02,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0x12,0x0210,0x18,0x01,0x24,0x01,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+
+XGI_ExtStruct  XGI330_EModeIDTable[]=
+{
+ {0x6a,0x2212,0x0407,0x3a81,0x0102,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x2e,0x0a1b,0x0306,0x3a57,0x0101,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x2f,0x0a1b,0x0305,0x3a50,0x0100,0x08,0x05,0x00,0x00,0x05,0x05},
+ {0x30,0x2a1b,0x0407,0x3a81,0x0103,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x31,0x0a1b,0x030d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x32,0x0a1b,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x33,0x0a1d,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x34,0x2a1d,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x35,0x0a1f,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x36,0x2a1f,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x37,0x0212,0x0508,0x3aab,0x0104,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x38,0x0a1b,0x0508,0x3aab,0x0105,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x3a,0x0e3b,0x0609,0x3adc,0x0107,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x3c,0x0e3b,0x070a,0x3af2,0x0130,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE [2003/10/07] */
+ {0x3d,0x0e7d,0x070a,0x3af2,0x0131,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE */
+ {0x40,0x9a1c,0x0000,0x3a34,0x010d,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x41,0x9a1d,0x0000,0x3a34,0x010e,0x08,0x00,0x00,0x00,0x04,0x00},	/* ModeIdIndex = 0x10 */
+ {0x43,0x0a1c,0x0306,0x3a57,0x0110,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x44,0x0a1d,0x0306,0x3a57,0x0111,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x46,0x2a1c,0x0407,0x3a81,0x0113,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x47,0x2a1d,0x0407,0x3a81,0x0114,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x49,0x0a3c,0x0508,0x3aab,0x0116,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4a,0x0a3d,0x0508,0x3aab,0x0117,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4c,0x0e7c,0x0609,0x3adc,0x0119,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x4d,0x0e7d,0x0609,0x3adc,0x011a,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x50,0x9a1b,0x0001,0x3a3b,0x0132,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x51,0xba1b,0x0103,0x3a42,0x0133,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x52,0x9a1b,0x0204,0x3a49,0x0134,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x56,0x9a1d,0x0001,0x3a3b,0x0135,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x57,0xba1d,0x0103,0x3a42,0x0136,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x58,0x9a1d,0x0204,0x3a49,0x0137,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x59,0x9a1b,0x0000,0x3a34,0x0138,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x5A,0x021b,0x0014,0x3b83,0x0138,0x08,0x01,0x00,0x00,0x04,0x3f},	/* ModeIdIndex = 0x20 */
+ {0x5B,0x0a1d,0x0014,0x3b83,0x0135,0x08,0x01,0x00,0x00,0x04,0x3f},
+ {0x5d,0x0a1d,0x0305,0x3a50,0x0139,0x08,0x05,0x00,0x00,0x07,0x05},
+ {0x62,0x0a3f,0x0306,0x3a57,0x013a,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x63,0x2a3f,0x0407,0x3a81,0x013b,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x64,0x0a7f,0x0508,0x3aab,0x013c,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x65,0x0eff,0x0609,0x3adc,0x013d,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x66,0x0eff,0x070a,0x3af2,0x013e,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE */
+ {0x68,0x067b,0x080b,0x3b17,0x013f,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x69,0x06fd,0x080b,0x3b17,0x0140,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x6b,0x07ff,0x080b,0x3b17,0x0141,0x10,0x0b,0x00,0x00,0x00,0x29},
+ {0x6c,0x067b,0x090c,0x3b37,0x0000,0x08,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6d,0x06fd,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6e,0x07ff,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x70,0x2a1b,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x71,0x0a1b,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x74,0x0a1d,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},	/* ModeIdIndex = 0x30 */
+ {0x75,0x0a3d,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x76,0x2a1f,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x77,0x0a1f,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x78,0x0a3f,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x79,0x0a3b,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x7a,0x2a1d,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x7b,0x0e3b,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7c,0x0e7d,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7d,0x0eff,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x20,0x0e3b,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x21,0x0e7d,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x22,0x0eff,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x23,0x0e3b,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x24,0x0e7d,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x25,0x0eff,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x26,0x063b,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},	/* ModeIdIndex = 0x40 */
+ {0x27,0x067d,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0x28,0x06ff,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0xff,0x0000,0x0000,0x0000,0x0000,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+XGI_StandTableStruct XGI330_StandTable[]=
+{
+/* MD_0_200 */
+ {
+  0x28,0x18,0x08,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_1_200 */
+ {
+  0x28,0x18,0x08,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_200 */
+ {
+  0x50,0x18,0x08,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_3_200 */
+ {
+  0x50,0x18,0x08,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_4 */
+ {
+  0x28,0x18,0x08,0x4000,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+   0xff},
+  {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x03,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+   0xff}
+ },
+/* MD_5 */
+ {
+  0x28,0x18,0x08,0x4000,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+   0xff},
+  {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x03,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+   0xff}
+ },
+/* MD_6 */
+ {
+  0x50,0x18,0x08,0x4000,
+  {0x01,0x01,0x00,0x06},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xc2,
+   0xff},
+  {0x00,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+   0x17,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+   0x01,0x00,0x01,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x0d,0x00,
+   0xff}
+ },
+/* MD_7 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x00,0x03,0x00,0x03},
+  0xa6,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x0d,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+   0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+   0x0e,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+   0xff}
+ },
+/* MDA_DAC */
+ {
+  0x00,0x00,0x00,0x0000,
+  {0x00,0x00,0x00,0x15},
+  0x15,
+  {0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15,0x15,0x15,0x3f,0x3f,
+   0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x00,0x00,
+   0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15},
+  {0x15,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x3f}
+ },
+/* CGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x09,0x15,0x00},
+  0x10,
+  {0x04,0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,
+   0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x2a,0x3a,
+   0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x10,
+   0x04},
+  {0x14,0x01,0x11,0x09,0x15,0x00,0x10,0x04,
+   0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,0x2e,
+   0x3e,0x2b,0x3b,0x2f},
+  {0x3f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+   0x3f}
+ },
+/* EGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x05,0x15,0x20},
+  0x30,
+  {0x24,0x34,0x21,0x31,0x25,0x35,0x08,0x18,
+   0x0c,0x1c,0x09,0x19,0x0d,0x1d,0x28,0x38,
+   0x2c,0x3c,0x29,0x39,0x2d,0x3d,0x02,0x12,
+   0x06},
+  {0x16,0x03,0x13,0x07,0x17,0x22,0x32,0x26,
+   0x36,0x23,0x33,0x27,0x37,0x0a,0x1a,0x0e,
+   0x1e,0x0b,0x1b,0x0f},
+  {0x1f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+   0x3f}
+ },
+/* VGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x09,0x15,0x2a},
+  0x3a,
+  {0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x05,
+   0x08,0x0b,0x0e,0x11,0x14,0x18,0x1c,0x20,
+   0x24,0x28,0x2d,0x32,0x38,0x3f,0x00,0x10,
+   0x1f},
+  {0x2f,0x3f,0x1f,0x27,0x2f,0x37,0x3f,0x2d,
+   0x31,0x36,0x3a,0x3f,0x00,0x07,0x0e,0x15,
+   0x1c,0x0e,0x11,0x15},
+  {0x18,0x1c,0x14,0x16,0x18,0x1a,0x1c,0x00,
+   0x04}
+ },
+ {
+  0x08,0x0c,0x10,0x0a08,
+  {0x0c,0x0e,0x10,0x0b},
+  0x0c,
+  {0x0d,0x0f,0x10,0x10,0x01,0x08,0x00,0x00,
+   0x00,0x00,0x01,0x00,0x02,0x02,0x01,0x00,
+   0x04,0x04,0x01,0x00,0x05,0x02,0x05,0x00,
+   0x06},
+  {0x01,0x06,0x05,0x06,0x00,0x08,0x01,0x08,
+   0x00,0x07,0x02,0x07,0x06,0x07,0x00,0x00,
+   0x00,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00}
+ },
+/* MD_D */
+ {
+  0x28,0x18,0x08,0x2000,
+  {0x09,0x0f,0x00,0x06},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_E */
+ {
+  0x50,0x18,0x08,0x4000,
+  {0x01,0x0f,0x00,0x06},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* ExtVGATable */
+ {
+  0x00,0x00,0x00,0x0000,
+  {0x01,0x0f,0x00,0x0e},
+  0x23,
+  {0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+   0x01,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+   0xff}
+ },
+/* ROM_SAVEPTR */
+ {
+  0x9f,0x3b,0x00,0x00c0,
+  {0x00,0x00,0x00,0x00},
+  0x00,
+  {0x00,0x00,0x00,0x00,0x00,0x00,0xbb,0x3f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x1a,0x00,0xac,0x3e,0x00,0xc0,
+   0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00}
+ },
+/* MD_F */
+ {
+  0x50,0x18,0x0e,0x8000,
+  {0x01,0x0f,0x00,0x06},
+  0xa2,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+   0xff},
+  {0x00,0x08,0x00,0x00,0x18,0x18,0x00,0x00,
+   0x00,0x08,0x00,0x00,0x00,0x18,0x00,0x00,
+   0x0b,0x00,0x05,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x05,
+   0xff}
+ },
+/* MD_10 */
+ {
+  0x50,0x18,0x0e,0x8000,
+  {0x01,0x0f,0x00,0x06},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_0_350 */
+ {
+  0x28,0x18,0x0e,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0xa3,
+  {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_1_350 */
+ {
+  0x28,0x18,0x0e,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0xa3,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_350 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_3_350 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_0_1_400 */
+ {
+  0x28,0x18,0x10,0x0800,
+  {0x08,0x03,0x00,0x02},
+  0x67,
+  {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x0c,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_3_400 */
+ {
+  0x50,0x18,0x10,0x1000,
+  {0x00,0x03,0x00,0x02},
+  0x67,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x0c,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_7_400 */
+ {
+  0x50,0x18,0x10,0x1000,
+  {0x00,0x03,0x00,0x02},
+  0x66,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x0f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+   0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+   0x0e,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+   0xff}
+ },
+/* MD_11 */
+ {
+  0x50,0x1d,0x10,0xa000,
+  {0x01,0x0f,0x00,0x06},
+  0xe3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xc3,
+   0xff},
+  {0x00,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x01,
+   0xff}
+ },
+/* ExtEGATable */
+ {
+  0x50,0x1d,0x10,0xa000,
+  {0x01,0x0f,0x00,0x06},
+  0xe3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_13 */
+ {
+  0x28,0x18,0x08,0x2000,
+  {0x01,0x0f,0x00,0x0e},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x40,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+   0x41,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+   0xff}
+ }
+};
+
+XGI_TimingHStruct XGI_TimingH[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_TimingVStruct XGI_TimingV[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_XG21CRT1Struct XGI_UpdateCRT1Table[]=
+{
+ {0x01,0x27,0x91,0x8f,0xc0},	/* 00 */
+ {0x03,0x4f,0x83,0x8f,0xc0},	/* 01 */
+ {0x05,0x27,0x91,0x8f,0xc0},	/* 02 */
+ {0x06,0x4f,0x83,0x8f,0xc0},	/* 03 */
+ {0x07,0x4f,0x83,0x8f,0xc0},	/* 04 */
+ {0x0d,0x27,0x91,0x8f,0xc0},	/* 05 */
+ {0x0e,0x4f,0x83,0x8f,0xc0},	/* 06 */
+ {0x0f,0x4f,0x83,0x5d,0xc0},	/* 07 */
+ {0x10,0x4f,0x83,0x5d,0xc0},	/* 08 */
+ {0x11,0x4f,0x83,0xdf,0x0c},	/* 09 */
+ {0x12,0x4f,0x83,0xdf,0x0c},	/* 10 */
+ {0x13,0x4f,0x83,0x8f,0xc0},	/* 11 */
+ {0x2e,0x4f,0x83,0xdf,0x0c},	/* 12 */
+ {0x2e,0x4f,0x87,0xdf,0xc0},	/* 13 */
+ {0x2f,0x4f,0x83,0x8f,0xc0},	/* 14 */
+ {0x50,0x27,0x91,0xdf,0x0c},	/* 15 */
+ {0x59,0x27,0x91,0x8f,0xc0}	/* 16 */
+};
+
+XGI_CRT1TableStruct XGI_CRT1Table[]=
+{
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+    0xbf,0x1f,0x9c,0x8e,0x96,0xb9,0x30}}, /* 0x0 */
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+    0x0b,0x3e,0xe9,0x8b,0xe7,0x04,0x00}}, /* 0x1 */
+ {{0x3D,0x31,0x81,0x37,0x1F,0x00,0x05,0x00,
+    0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}}, /* 0x2 */
+ {{0x4F,0x3F,0x93,0x45,0x0D,0x00,0x01,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x3 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+    0xBF,0x1F,0x9C,0x8E,0x96,0xB9,0x30}}, /* 0x4 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+    0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x5 */
+ {{0x63,0x50,0x86,0x56,0x9B,0x00,0x01,0x00,
+    0x06,0x3E,0xE8,0x8B,0xE7,0xFF,0x10}}, /* 0x6 */
+ {{0x64,0x4F,0x88,0x55,0x9D,0x00,0x01,0x00,
+    0xF2,0x1F,0xE0,0x83,0xDF,0xF3,0x10}}, /* 0x7 */
+ {{0x63,0x4F,0x87,0x5A,0x81,0x00,0x05,0x00,
+    0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x10}}, /* 0x8 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+    0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x80}}, /* 0x9 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+    0x01,0x3E,0xE0,0x83,0xDF,0x02,0x80}}, /* 0xa */
+ {{0x67,0x4F,0x8B,0x58,0x81,0x00,0x05,0x60,
+    0x0D,0x3E,0xE0,0x83,0xDF,0x0E,0x90}}, /* 0xb */
+ {{0x65,0x4F,0x89,0x57,0x9F,0x00,0x01,0x00,
+   0xFB,0x1F,0xE6,0x8A,0xDF,0xFC,0x10}}, /* 0xc */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00,    /* ; 0D (800x600,56Hz) */
+    0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}},         /* ; (VCLK 36.0MHz) */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00,    /* ; 0E (800x600,60Hz) */
+    0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}},         /* ; (VCLK 40.0MHz) */
+ {{0x7D,0x63,0x81,0x6E,0x1D,0x00,0x06,0x00,    /* ; 0F (800x600,72Hz) */
+    0x98,0xF0,0x7C,0x82,0x57,0x99,0x80}},         /* ; (VCLK 50.0MHz) */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00,    /* ; 10 (800x600,75Hz) */
+    0x6F,0xF0,0x58,0x8B,0x57,0x70,0xA0}},         /* ; (VCLK 49.5MHz) */
+ {{0x7E,0x63,0x82,0x6B,0x13,0x00,0x06,0x00,    /* ; 11 (800x600,85Hz) */
+    0x75,0xF0,0x58,0x8B,0x57,0x76,0xA0}},         /* ; (VCLK 56.25MHz) */
+ {{0x81,0x63,0x85,0x6D,0x18,0x00,0x06,0x60,    /* ; 12 (800x600,100Hz) */
+    0x7A,0xF0,0x58,0x8B,0x57,0x7B,0xA0}},         /* ; (VCLK 75.8MHz) */
+ {{0x83,0x63,0x87,0x6E,0x19,0x00,0x06,0x60,    /* ; 13 (800x600,120Hz) */
+    0x81,0xF0,0x58,0x8B,0x57,0x82,0xA0}},         /* ; (VCLK 79.411MHz) */
+ {{0x85,0x63,0x89,0x6F,0x1A,0x00,0x06,0x60,    /* ; 14 (800x600,160Hz) */
+   0x91,0xF0,0x58,0x8B,0x57,0x92,0xA0}},         /* ; (VCLK 105.822MHz) */
+ {{0x99,0x7F,0x9D,0x84,0x1A,0x00,0x02,0x00,
+    0x96,0x1F,0x7F,0x83,0x7F,0x97,0x10}}, /* 0x15 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x16 */
+ {{0xA1,0x7F,0x85,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x17 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+    0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90}}, /* 0x18 */
+ {{0xA7,0x7F,0x8B,0x89,0x95,0x00,0x02,0x00,
+    0x26,0xF5,0x00,0x83,0xFF,0x27,0x90}}, /* 0x19 */
+ {{0xA9,0x7F,0x8D,0x8C,0x9A,0x00,0x02,0x62,
+    0x2C,0xF5,0x00,0x83,0xFF,0x2D,0x14}}, /* 0x1a */
+ {{0xAB,0x7F,0x8F,0x8D,0x9B,0x00,0x02,0x62,
+    0x35,0xF5,0x00,0x83,0xFF,0x36,0x14}}, /* 0x1b */
+ {{0xCF,0x9F,0x93,0xB2,0x01,0x00,0x03,0x00,
+    0x14,0xBA,0x00,0x83,0xFF,0x15,0x00}}, /* 0x1c */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1d */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+    0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1e */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+    0x2E,0x5A,0x00,0x83,0xFF,0x2F,0x89}}, /* 0x1f */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x20 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x21 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x22 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x23 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x24 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x25 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x26 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x27 */
+ {{0x43,0xEF,0x87,0x06,0x00,0x41,0x05,0x62,
+    0xD4,0x1F,0xA0,0x83,0x9F,0xD5,0x9F}}, /* 0x28 */
+ {{0x45,0xEF,0x89,0x07,0x01,0x41,0x05,0x62,
+    0xD9,0x1F,0xA0,0x83,0x9F,0xDA,0x9F}}, /* 0x29 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2a */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2b */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2c */
+ {{0x59,0xFF,0x9D,0x17,0x13,0x41,0x05,0x44,
+    0x33,0xBA,0x00,0x83,0xFF,0x34,0x0F}}, /* 0x2d */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+    0x38,0xBA,0x00,0x83,0xFF,0x39,0x0F}}, /* 0x2e */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+    0x3D,0xBA,0x00,0x83,0xFF,0x3E,0x0F}}, /* 0x2f */
+ {{0x5D,0xFF,0x81,0x19,0x95,0x41,0x05,0x44,
+    0x41,0xBA,0x00,0x84,0xFF,0x42,0x0F}}, /* 0x30 */
+ {{0x55,0xFF,0x99,0x0D,0x0C,0x41,0x05,0x00,
+    0x3E,0xBA,0x00,0x84,0xFF,0x3F,0x0F}}, /* 0x31 */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00,
+    0x72,0xBA,0x27,0x8B,0xDF,0x73,0x80}}, /* 0x32 */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00,
+    0x6F,0xBA,0x26,0x89,0xDF,0x6F,0x80}}, /* 0x33 */
+ {{0x7F,0x63,0x82,0x6B,0x13,0x00,0x06,0x00,
+    0x75,0xBA,0x29,0x8C,0xDF,0x75,0x80}}, /* 0x34 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF1,0xAF,0x85,0x3F,0x25,0xB0}}, /* 0x35 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+    0x1E,0xF1,0xAD,0x81,0x3F,0x1F,0xB0}}, /* 0x36 */
+ {{0xA7,0x7F,0x88,0x89,0x15,0x00,0x02,0x00,
+    0x26,0xF1,0xB1,0x85,0x3F,0x27,0xB0}}, /* 0x37 */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x28,0xC4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x38 */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+    0x28,0xD4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x39 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+    0x2E,0xD4,0x7D,0x81,0xCF,0x2F,0xA1}}, /* 0x3a */
+ {{0xDC,0x9F,0x00,0xAB,0x19,0x00,0x07,0x00,
+    0xE6,0xEF,0xC0,0xC3,0xBF,0xE7,0x90}}, /* 0x3b */
+ {{0x6B,0x59,0x8F,0x5E,0x8C,0x00,0x05,0x00,
+    0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x3c */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00,
+    0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}}, /* 0x3d */
+ {{0x86,0x6A,0x8a,0x74,0x06,0x00,0x02,0x00,
+    0x8c,0x15,0x4f,0x83,0xef,0x8d,0x30}}, /* 0x3e */
+ {{0x81,0x6A,0x85,0x70,0x00,0x00,0x02,0x00,
+    0x0f,0x3e,0xeb,0x8e,0xdf,0x10,0x00}}, /* 0x3f */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x20,0xF5,0x03,0x88,0xFF,0x21,0x90}}, /* 0x40 */
+ {{0xE6,0xAE,0x8A,0xBD,0x90,0x00,0x03,0x00,
+    0x3D,0x10,0x1A,0x8D,0x19,0x3E,0x2F}}, /* 0x41 */
+ {{0xB9,0x8F,0x9D,0x9B,0x8A,0x00,0x06,0x00,
+    0x7D,0xFF,0x60,0x83,0x5F,0x7E,0x90}}, /* 0x42 */
+ {{0xC3,0x8F,0x87,0x9B,0x0B,0x00,0x07,0x00,
+    0x82,0xFF,0x60,0x83,0x5F,0x83,0x90}},  /* 0x43 */
+ {{0xAD,0x7F,0x91,0x8E,0x9C,0x00,0x02,0x82,
+    0x49,0xF5,0x00,0x83,0xFF,0x4A,0x90}},  /* 0x44 */
+ {{0xCD,0x9F,0x91,0xA7,0x19,0x00,0x07,0x60,
+    0xE6,0xFF,0xC0,0x83,0xBF,0xE7,0x90}},  /* 0x45 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x60,
+    0xF1,0xFF,0xC0,0x83,0xBF,0xF2,0x90}},  /* 0x46 */
+ {{0xD7,0x9F,0x9B,0xAC,0x1E,0x00,0x07,0x00,
+    0x03,0xDE,0xC0,0x84,0xBF,0x04,0x90}}  /* 0x47 */
+};
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 02 (720x400) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 03 (720x350) */
+                {{      0x6A,0x77,0xBB,0x6E,0x84,0x2E,0x02,0x5A,0x04,0x00,0x80,0x20,0x7E,0x80,0x97,0x00  }},/* 04 (640x480) ;;5/6/02 */
+                {{      0xCF,0x77,0xB7,0xC8,0x84,0x3B,0x02,0x5A,0x04,0x00,0x80,0x19,0x88,0xAE,0xA3,0x00  }},/* 05 (800x600) ;;1/12/02 */
+                {{      0xEE,0x77,0xBB,0x66,0x87,0x32,0x01,0x5A,0x04,0x00,0x80,0x1B,0xD4,0x2F,0x6F,0x00  }}/* 06 (1024x768) ;;5/6/02 */
+          };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[]= {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 02 (720x400) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 03 (720x350) */
+                {{      0x69,0x77,0xBB,0x6E,0x84,0x1E,0x00,0x5A,0x04,0x00,0x80,0x25,0x1A,0x80,0x26,0x00  }},/* 04 (640x480) ;;5/6/02 */
+                {{      0xCE,0x77,0xB7,0xB6,0x83,0x2C,0x02,0x5A,0x04,0x00,0x80,0x1C,0x00,0x82,0x97,0x00  }},/* 05 (800x600) ;;5/6/02 */
+                {{      0xED,0x77,0xBB,0x66,0x8C,0x21,0x02,0x5A,0x04,0x00,0x80,0x1F,0xA0,0x7E,0x73,0x00  }}/* 06 (1024x768) ;;5/6/02 */
+          };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[]=  {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 00 (640x200,640x400) */
+                {{      0x41,0x7F,0xB7,0x80,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 01 (640x350) */
+                {{      0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 02 (720x400) */
+                {{      0x41,0x7F,0xB7,0x12,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 03 (720x350) */
+                {{      0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00  }},/* ; 04 (640x480) */
+                {{      0xC3,0x7F,0xB7,0x7A,0x84,0x40,0x02,0x5A,0x05,0x00,0x80,0x1F,0x84,0x3D,0x28,0x00  }},/* ; 05 (800x600) ;;1/12/02 */
+                {{      0xE5,0x7F,0xB7,0x1D,0xA7,0x3E,0x04,0x5A,0x05,0x00,0x80,0x20,0x3E,0xE4,0x22,0x00  }}/* ; 06 (1024x768) ;;1/12/02 */
+	  };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[]={
+                /* Index:000,0x01,0x02,0x04,0x03,0x05,0x06,0x07,0x08,0x15,0x1F,0x0C,0x0D,0x0E,0x0F,0x10h */
+                {{      0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
+                {{      0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
+                {{      0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 02 (720x400) */
+                {{      0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 03 (720x350) */
+                {{      0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00 }},/* 04 (640x480) */
+                {{      0xC1,0x7F,0xB7,0x4D,0x8C,0x1E,0x31,0x5A,0x05,0x00,0x80,0x26,0x78,0x19,0x34,0x00 }},/* 05 (800x600) ;;1/12/02 */
+                {{      0xE4,0x7F,0xB7,0x1E,0xAF,0x29,0x37,0x5A,0x05,0x00,0x80,0x25,0x8C,0xB2,0x2A,0x00 }}/* 06 (1024x768) ;;1/12/02 */
+	     };
+
+UCHAR XGI_CH7017LV1024x768[]={0x60,0x02,0x00,0x07,0x40,0xED,0xA3,
+                   			0xC8,0xC7,0xAC,0xE0,0x02};
+UCHAR XGI_CH7017LV1400x1050[]={0x60,0x03,0x11,0x00,0x40,0xE3,0xAD,
+                   			0xDB,0xF6,0xAC,0xE0,0x02};
+
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataStruct  XGI_StLCD1024x768Data[]=
+{
+ {   62,  25, 800, 546,1344, 806},
+ {   32,  15, 930, 546,1344, 806},
+ {   62,  25, 800, 546,1344, 806}, /* chiawen for dot9 -> dot8 */
+ {  104,  45, 945, 496,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {   31,  18,1008, 624,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[]=
+{
+ {   42,  25,1536, 419,1344, 806}, /* { 12, 5, 896, 512,1344, 806}, // alan 09/12/2003 */
+ {   48,  25,1536, 369,1344, 806}, /* { 12, 5, 896, 510,1344, 806}, // alan 09/12/2003 */
+ {   42,  25,1536, 419,1344, 806}, /* { 32, 15,1008, 505,1344, 806}, // alan 09/12/2003 */
+ {   48,  25,1536, 369,1344, 806}, /* { 32, 15,1008, 514,1344, 806}, // alan 09/12/2003 */
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806},
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806},
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};
+
+/*XGI330_LCDDataStruct  XGI_St2LCD1024x768Data[]=
+{
+ {   62,  25, 800, 546,1344, 806},
+ {   32,  15, 930, 546,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {  104,  45, 945, 496,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {   31,  18,1008, 624,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};*/
+
+XGI330_LCDDataStruct  XGI_CetLCD1024x768Data[]=
+{
+	{         1,1,1344,806,1344,806           }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1344,806,1344,806           }, /* 01 (320x350,640x350) */
+        {         1,1,1344,806,1344,806           }, /* 02 (360x400,720x400) */
+        {         1,1,1344,806,1344,806           }, /* 03 (720x350) */
+        {         1,1,1344,806,1344,806           }, /* 04 (640x480x60Hz) */
+        {         1,1,1344,806,1344,806           }, /* 05 (800x600x60Hz) */
+        {         1,1,1344,806,1344,806           }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1280x1024Data[]=
+{
+ {   22,   5, 800, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {   13,   5,1024, 675,1560,1152},
+ {   16,   9,1266, 804,1688,1072},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1280x1024Data[]=
+{
+ {  211,  60,1024, 501,1688,1066},
+ {  211,  60,1024, 508,1688,1066},
+ {  211,  60,1024, 501,1688,1066},
+ {  211,  60,1024, 508,1688,1066},
+ {  211,  60,1024, 500,1688,1066},
+ {  211,  75,1024, 625,1688,1066},
+ {  211, 120,1280, 798,1688,1066},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_St2LCD1280x1024Data[]=
+{
+ {   22,   5, 800, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {   13,   5,1024, 675,1560,1152},
+ {   16,   9,1266, 804,1688,1072},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1280x1024Data[]=
+{
+	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 02 (360x400,720x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 03 (720x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 04 (640x480x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 05 (800x600x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {         1,1,1688,1066,1688,1066         } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1400x1050Data[]=
+{
+	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
+        {         211,100,2100,408,1688,1066      }, /* 02 (360x400,720x400) */
+        {         211,64,1536,358,1688,1066       }, /* 03 (720x350) */
+        {         211,48,840,488,1688,1066        }, /* 04 (640x480x60Hz) */
+        {         211,72,1008,609,1688,1066       }, /* 05 (800x600x60Hz) */
+        {         211,128,1400,776,1688,1066      }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz w/o Scaling) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1400x1050Data[]=
+{
+	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
+        {         211,100,2100,408,1688,1066      }, /* 02 (360x400,720x400) */
+        {         211,64,1536,358,1688,1066       }, /* 03 (720x350) */
+        {         211,48,840,488,1688,1066        }, /* 04 (640x480x60Hz) */
+        {         211,72,1008,609,1688,1066       }, /* 05 (800x600x60Hz) */
+        {         211,128,1400,776,1688,1066      }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz w/o Scaling) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1600x1200Data[]=
+{
+        {         4,1,1620,420,2160,1250          }, /* { 3,1,2160,425,2160,1250 }, // 00 (320x200,320x400,640x200,640x400) // alan 10/14/2003 */
+        {         27,7,1920,375,2160,1250         }, /* 01 (320x350,640x350) */
+        {         4,1,1620,420,2160,1250          }, /* { 3,1,2160,425,2160,1250 }, // 02 (360x400,720x400) // alan 10/14/2003 */
+        {         27,7,1920,375,2160,1250         }, /* 03 (720x350) */
+        {         27,4,800,500,2160,1250          }, /* 04 (640x480x60Hz) */
+        {         4,1,1080,625,2160,1250          }, /* 05 (800x600x60Hz) */
+        {         5,2,1350,800,2160,1250          }, /* 06 (1024x768x60Hz) */
+        {         27,16,1500,1064,2160,1250       }, /* 07 (1280x1024x60Hz) */
+        {         9,7,1920,1106,2160,1250         }, /* 08 (1400x1050x60Hz) */
+        {         1,1,2160,1250,2160,1250         }  /* 09 (1600x1200x60Hz) ;302lv */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1600x1200Data[]=
+{
+        {         27,4,800,500,2160,1250          },/* 00 (320x200,320x400,640x200,640x400) */
+        {         27,4,800,500,2160,1250          },/* 01 (320x350,640x350) */
+        {         27,4,800,500,2160,1250          },/* 02 (360x400,720x400) */
+        {         27,4,800,500,2160,1250          },/* 03 (720x350) */
+        {         27,4,800,500,2160,1250          },/* 04 (320x240,640x480) */
+        {         4,1,1080,625,2160,1250          },/* 05 (400x300,800x600) */
+        {         5,2,1350,800,2160,1250          },/* 06 (512x384,1024x768) */
+        {         135,88,1600,1100,2160,1250      },/* 07 (1280x1024) */
+        {         1,1,1800,1500,2160,1250         },/* 08 (1400x1050) */
+        {         1,1,2160,1250,2160,1250         } /* 09 (1600x1200) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1400x1050Data[]=
+{
+	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 02 (360x400,720x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 03 (720x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 04 (640x480x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 05 (800x600x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_NoScalingData[]=
+{
+ {    1,   1, 800, 449, 800, 449},
+ {    1,   1, 800, 449, 800, 449},
+ {    1,   1, 900, 449, 900, 449},
+ {    1,   1, 900, 449, 900, 449},
+ {    1,   1, 800, 525, 800, 525},
+ {    1,   1,1056, 628,1056, 628},
+ {    1,   1,1344, 806,1344, 806},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1024x768x75Data[]=
+{
+        {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+        {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+        {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+        {8,5,1312,500,1312,800   }, /* ; 04 (640x480x75Hz) */
+        {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1024x768x75Data[]=
+{
+        {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+        {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+        {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+        {8,5,1312,500,1312,800   }, /* ; 04 (640x480x75Hz) */
+        {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1024x768x75Data[]=
+{
+        {1,1,1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+        {1,1,1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+        {1,1,1312,800,1312,800}, /* ; 03 (720x350) */
+        {1,1,1312,800,1312,800}, /* ; 04 (640x480x75Hz) */
+        {1,1,1312,800,1312,800}, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1280x1024x75Data[]=
+{
+        {211,60,1024,501,1688,1066   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {211,60,1024,508,1688,1066   }, /* ; 01 (320x350,640x350) */
+        {211,60,1024,501,1688,1066   }, /* ; 02 (360x400,720x400) */
+        {211,60,1024,508,1688,1066   }, /* ; 03 (720x350) */
+        {211,45,768,498,1688,1066    }, /* ; 04 (640x480x75Hz) */
+        {211,75,1024,625,1688,1066   }, /* ; 05 (800x600x75Hz) */
+        {211,120,1280,798,1688,1066  }, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066     }  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1280x1024x75Data[]=
+{
+        {211,60,1024,501,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {211,60,1024,508,1688,1066 }, /* ; 01 (320x350,640x350) */
+        {211,60,1024,501,1688,1066 }, /* ; 02 (360x400,720x400) */
+        {211,60,1024,508,1688,1066 }, /* ; 03 (720x350) */
+        {211,45,768,498,1688,1066  }, /* ; 04 (640x480x75Hz) */
+        {211,75,1024,625,1688,1066 }, /* ; 05 (800x600x75Hz) */
+        {211,120,1280,798,1688,1066}, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066   }  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1280x1024x75Data[]=
+{
+        {1,1,1688,1066,1688,1066}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,1688,1066,1688,1066}, /* ; 01 (320x350,640x350) */
+        {1,1,1688,1066,1688,1066}, /* ; 02 (360x400,720x400) */
+        {1,1,1688,1066,1688,1066}, /* ; 03 (720x350) */
+        {1,1,1688,1066,1688,1066}, /* ; 04 (640x480x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 05 (800x600x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066}  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_NoScalingDatax75[]=
+{
+        {1,1,800,449,800,449    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,800,449,800,449    }, /* ; 01 (320x350,640x350) */
+        {1,1,900,449,900,449    }, /* ; 02 (360x400,720x400) */
+        {1,1,900,449,900,449    }, /* ; 03 (720x350) */
+        {1,1,840,500,840,500    }, /* ; 04 (640x480x75Hz) */
+        {1,1,1056,625,1056,625  }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800  }, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 07 (1280x1024x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+        {1,1,2160,1250,2160,1250}, /* ; 09 (1600x1200x75Hz) */
+        {1,1,1688,806,1688,806  }  /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[]=
+{
+   {  9,1057,0, 771  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+   {  9,1057,0, 771  }, /* ; 01 (320x350,640x350) */
+   {  9,1057,0, 771  }, /* ; 02 (360x400,720x400) */
+   {  9,1057,0, 771  }, /* ; 03 (720x350) */
+   {  9,1057,0, 771  }, /* ; 04 (640x480x60Hz) */
+   {  9,1057,0, 771  }, /* ; 05 (800x600x60Hz) */
+   {  9,1057,805, 770  }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[]=
+{
+        { 9,1057,737,703   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        { 9,1057,686,651   }, /* ; 01 (320x350,640x350) */
+        { 9,1057,737,703   }, /* ; 02 (360x400,720x400) */
+        { 9,1057,686,651   }, /* ; 03 (720x350) */
+        { 9,1057,776,741   }, /* ; 04 (640x480x60Hz) */
+        { 9,1057, 0 ,771   }, /* ; 05 (800x600x60Hz) */
+        { 9,1057,805,770   }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[]=
+{
+       	{      1152,856,622,587   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      1152,856,597,562   }, /* ; 01 (320x350,640x350) */
+        {      1152,856,622,587   }, /* ; 02 (360x400,720x400) */
+        {      1152,856,597,562   }, /* ; 03 (720x350) */
+        {      1152,856,662,627   }, /* ; 04 (640x480x60Hz) */
+        {      1232,936,722,687   }, /* ; 05 (800x600x60Hz) */
+        {      0,1048,805,770   }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[]=
+{
+        {      18,1346,981,940     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1346,926,865     },/* 01 (320x350,640x350) */
+        {      18,1346,981,940     },/* 02 (360x400,720x400) */
+        {      18,1346,926,865     },/* 03 (720x350) */
+        {      18,1346,0,1025     },/* 04 (640x480x60Hz) */
+        {      18,1346,0,1025     },/* 05 (800x600x60Hz) */
+        {      18,1346,1065,1024     },/* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[]=
+{
+        {      18,1346,970,907     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1346,917,854     },/* 01 (320x350,640x350) */
+        {      18,1346,970,907     },/* 02 (360x400,720x400) */
+        {      18,1346,917,854     },/* 03 (720x350) */
+        {      18,1346,0,1025     },/* 04 (640x480x60Hz) */
+        {      18,1346,0,1025     },/* 05 (800x600x60Hz) */
+        {      18,1346,1065,1024     },/* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[]=
+{
+        {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
+        {      1368,1008,752,711    }, /* 02 (360x400,720x400) */
+    	{      1368,1008,729,688    }, /* 03 (720x350) */
+        {      1368,1008,794,753    }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813    }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897    }, /* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024    }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[]=
+{
+        {      9,1337,981,940    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      9,1337,926,884    }, /* ; 01 (320x350,640x350) alan, 2003/09/30 */
+        {      9,1337,981,940    }, /* ; 02 (360x400,720x400) */
+        {      9,1337,926,884    }, /* ; 03 (720x350) alan, 2003/09/30 */
+        {      9,1337,0,1025    }, /* ; 04 (640x480x60Hz) */
+        {      9,1337,0,1025    }, /* ; 05 (800x600x60Hz) */
+        {      9,1337,1065,1024    }, /* ; 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[]=
+{
+        {      9,1337,970,907    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      9,1337,917,854    }, /* ; 01 (320x350,640x350) */
+        {      9,1337,970,907    }, /* ; 02 (360x400,720x400) */
+        {      9,1337,917,854    }, /* ; 03 (720x350) */
+        {      9,1337,0,1025    }, /* ; 04 (640x480x60Hz) */
+        {      9,1337,0,1025    }, /* ; 05 (800x600x60Hz) */
+        {      9,1337,1065,1024    }, /* ; 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[]=
+{
+        {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
+        {      1368,1008,752,711    }, /* 02 (360x400,720x400) */
+    	{      1368,1008,729,688    }, /* 03 (720x350) */
+        {      1368,1008,794,753    }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813    }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897    }, /* 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1400x1050Data[]=
+{
+        {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
+        {      18,1464,0,1051    }, /* 02 (360x400,720x400) */
+        {      18,1464,0,1051    }, /* 03 (720x350) */
+        {      18,1464,0,1051    }, /* 04 (640x480x60Hz) */
+        {      18,1464,0,1051    }, /* 05 (800x600x60Hz) */
+        {      18,1464,0,1051    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1400x1050Data[]=
+{
+        {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
+        {      18,1464,0,1051    }, /* 02 (360x400,720x400) */
+        {      18,1464,0,1051    }, /* 03 (720x350) */
+        {      18,1464,0,1051    }, /* 04 (640x480x60Hz) */
+        {      18,1464,0,1051    }, /* 05 (800x600x60Hz) */
+        {      18,1464,0,1051    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1400x1050Data[]=
+{
+        {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1455,0,1051     },/* 01 (320x350,640x350) */
+        {      9,1455,0,1051     },/* 02 (360x400,720x400) */
+        {      9,1455,0,1051     },/* 03 (720x350) */
+        {      9,1455,0,1051     },/* 04 (640x480x60Hz) */
+        {      9,1455,0,1051     },/* 05 (800x600x60Hz) */
+        {      9,1455,0,1051     },/* 06 (1024x768x60Hz) */
+        {      1637,1397,1053,1038     },/* 07 (1280x1024x60Hz) */
+        {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1400x1050Data[]=
+{
+        {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1455,0,1051     },/* 01 (320x350,640x350) */
+        {      9,1455,0,1051     },/* 02 (360x400,720x400) */
+        {      9,1455,0,1051     },/* 03 (720x350) */
+        {      9,1455,0,1051     },/* 04 (640x480x60Hz) */
+        {      9,1455,0,1051     },/* 05 (800x600x60Hz) */
+        {      9,1455,0,1051     },/* 06 (1024x768x60Hz) */
+        {      1637,1397,1053,1038     },/* 07 (1280x1024x60Hz) */
+        {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[]=
+{
+        {      1308,1068,781,766    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1308,1068,781,766    }, /* 01 (320x350,640x350) */
+        {      1308,1068,781,766    }, /* 02 (360x400,720x400) */
+        {      1308,1068,781,766    }, /* 03 (720x350) */
+        {      1308,1068,781,766    }, /* 04 (640x480x60Hz) */
+        {      1388,1148,841,826    }, /* 05 (800x600x60Hz) */
+        {      1490,1250,925,910    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[]=
+{
+        {      0,1448,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1448,0,1051    }, /* 01 (320x350,640x350) */
+        {      0,1448,0,1051    }, /* 02 (360x400,720x400) */
+        {      0,1448,0,1051    }, /* 03 (720x350) */
+        {      0,1448,0,1051    }  /* 04 (640x480x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[]=
+{
+	{      18,1682,0,1201    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1682,0,1201    }, /* 01 (320x350,640x350) */
+        {      18,1682,0,1201    }, /* 02 (360x400,720x400) */
+        {      18,1682,0,1201    }, /* 03 (720x350) */
+        {      18,1682,0,1201    }, /* 04 (640x480x60Hz) */
+        {      18,1682,0,1201    }, /* 05 (800x600x60Hz) */
+        {      18,1682,0,1201    }, /* 06 (1024x768x60Hz) */
+        {      18,1682,0,1201    }, /* 07 (1280x1024x60Hz) */
+        {      18,1682,0,1201    }, /* 08 (1400x1050x60Hz) */
+        {      18,1682,0,1201    }  /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[]=
+{
+        {      18,1682,1150,1101    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1682,1083,1034    }, /* 01 (320x350,640x350) */
+        {      18,1682,1150,1101    }, /* 02 (360x400,720x400) */
+        {      18,1682,1083,1034    }, /* 03 (720x350) */
+        {      18,1682,0,1201    }, /* 04 (640x480x60Hz) */
+        {      18,1682,0,1201    }, /* 05 (800x600x60Hz) */
+        {      18,1682,0,1201    }, /* 06 (1024x768x60Hz) */
+        {      18,1682,1232,1183    }, /* 07 (1280x1024x60Hz) */
+        {      18,1682,0,1201    }, /* 08 (1400x1050x60Hz) */
+        {      18,1682,0,1201    } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[]=
+{
+        {      9,1673,0,1201     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1673,0,1201     },/* 01 (320x350,640x350) */
+        {      9,1673,0,1201     },/* 02 (360x400,720x400) */
+        {      9,1673,0,1201     },/* 03 (720x350) */
+        {      9,1673,0,1201     },/* 04 (640x480x60Hz) */
+        {      9,1673,0,1201     },/* 05 (800x600x60Hz) */
+        {      9,1673,0,1201     },/* 06 (1024x768x60Hz) */
+        {      9,1673,0,1201     },/* 07 (1280x1024x60Hz) */
+        {      9,1673,0,1201     },/* 08 (1400x1050x60Hz) */
+        {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[]=
+{
+	{      9,1673,1150,1101     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1673,1083,1034     },/* 01 (320x350,640x350) */
+        {      9,1673,1150,1101     },/* 02 (360x400,720x400) */
+        {      9,1673,1083,1034     },/* 03 (720x350) */
+        {      9,1673,0,1201     },/* 04 (640x480x60Hz) */
+        {      9,1673,0,1201     },/* 05 (800x600x60Hz) */
+        {      9,1673,0,1201     },/* 06 (1024x768x60Hz) */
+        {      9,1673,1232,1183     },/* 07 (1280x1024x60Hz) */
+        {      9,1673,0,1201     },/* 08 (1400x1050x60Hz) */
+        {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[]=
+{
+        {     9,657,448,405,96,2  }, /* 00 (320x200,320x400,640x200,640x400) */
+        {     9,657,448,355,96,2  }, /* 01 (320x350,640x350) */
+        {     9,657,448,405,96,2  }, /* 02 (360x400,720x400) */
+        {     9,657,448,355,96,2  }, /* 03 (720x350) */
+        {     9,657,1,483,96,2  }, /* 04 (640x480x60Hz) */
+        {     9,849,627,600,128,4  }, /* 05 (800x600x60Hz) */
+        {     9,1057,805,770,0136,6  }, /* 06 (1024x768x60Hz) */
+        {     9,1337,0,1025,112,3  }, /* 07 (1280x1024x60Hz) */
+        {     9,1457,0,1051,112,3  }, /* 08 (1400x1050x60Hz) }, //;[ycchen] 12/19/02 */
+        {     9,1673,0,1201,192,3  }, /* 09 (1600x1200x60Hz) */
+        {     9,1337,0,771,112,6  }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768x75Data[]=		/* ;;1024x768x75Hz */
+{
+        {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1049,0,769},    /* ; 01 (320x350,640x350) */
+        {9,1049,0,769},    /* ; 02 (360x400,720x400) */
+        {9,1049,0,769},    /* ; 03 (720x350) */
+        {9,1049,0,769},    /* ; 04 (640x480x75Hz) */
+        {9,1049,0,769},    /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768x75Data[]=
+{
+        {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1049,0,769},    /* ; 01 (320x350,640x350) */
+        {9,1049,0,769},    /* ; 02 (360x400,720x400) */
+        {9,1049,0,769},    /* ; 03 (720x350) */
+        {9,1049,0,769},    /* ; 04 (640x480x75Hz) */
+        {9,1049,0,769},    /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[]=	/* ;;1024x768x75Hz */
+{
+        {1152,856,622,587},     /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1152,856,597,562},     /* ; 01 (320x350,640x350) */
+        {1192,896,622,587},     /* ; 02 (360x400,720x400) */
+        {1192,896,597,562},     /* ; 03 (720x350) */
+        {1129,857,656,625},     /* ; 04 (640x480x75Hz) */
+        {1209,937,716,685},     /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769} 	   	/* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+{
+        {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
+        {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
+        {18,1314,0,1025     },/* ; 02 (360x400,720x400) */
+        {18,1314,0,1025     },/* ; 03 (720x350) */
+        {18,1314,0,1025     },/* ; 04 (640x480x60Hz) */
+        {18,1314,0,1025     },/* ; 05 (800x600x60Hz) */
+        {18,1314,0,1025     },/* ; 06 (1024x768x60Hz) */
+        {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1280x1024x75Data[]=
+{
+        {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
+        {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
+        {18,1314,0,1025     },/* ; 02 (360x400,720x400) */
+        {18,1314,0,1025     },/* ; 03 (720x350) */
+        {18,1314,0,1025     },/* ; 04 (640x480x60Hz) */
+        {18,1314,0,1025     },/* ; 05 (800x600x60Hz) */
+        {18,1314,0,1025     },/* ; 06 (1024x768x60Hz) */
+        {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+{
+        {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
+        {1408,1048,752,711},    /* ; 02 (360x400,720x400) */
+        {1408,1048,729,688},    /* ; 03 (720x350) */
+        {1377,985,794,753},    /* ; 04 (640x480x75Hz) */
+        {1457,1065,854,813},    /* ; 05 (800x600x75Hz) */
+        {1569,1177,938,897},    /* ; 06 (1024x768x75Hz) */
+        {18,1314,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+{
+	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+        {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+        {9,1305,0,1025},/* ; 03 (720x350) */
+        {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+        {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+        {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+        {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024x75Data[]=
+{
+	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+        {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+        {9,1305,0,1025},/* ; 03 (720x350) */
+        {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+        {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+        {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+        {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+{
+        {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
+        {1408,1048,752,711},    /* ; 02 (360x400,720x400) */
+        {1408,1048,729,688},    /* ; 03 (720x350) */
+        {1377,985,794,753},    /* ; 04 (640x480x75Hz) */
+        {1457,1065,854,813},    /* ; 05 (800x600x75Hz) */
+        {1569,1177,938,897},    /* ; 06 (1024x768x75Hz) */
+        {9,1305,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[]= /* Scaling LCD 75Hz */
+{
+	{9,657,448,405,96,2},   /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,657,448,355,96,2},   /* ; 01 (320x350,640x350) */
+        {9,738,448,405,108,2},   /* ; 02 (360x400,720x400) */
+        {9,738,448,355,108,2},   /* ; 03 (720x350) */
+        {9,665,0,481,64,3},   /* ; 04 (640x480x75Hz) */
+        {9,825,0,601,80,3},   /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769,96,3},   /* ; 06 (1024x768x75Hz) */
+        {9,1305,0,1025,144,3},   /* ; 07 (1280x1024x75Hz) */
+        {9,1457,0,1051,112,3},   /* ; 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {9,1673,0,1201,192,3},   /* ; 09 (1600x1200x75Hz) */
+        {9,1337,0,771,112,6}    /* ; 0A (1280x768x60Hz) */
+};
+
+XGI330_TVDataStruct  XGI_StPALData[]=
+{
+ {    1,   1, 864, 525,1270, 400, 100,   0, 760},
+ {    1,   1, 864, 525,1270, 350, 100,   0, 760},
+ {    1,   1, 864, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 864, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 864, 525,1270, 480,  50,   0, 760},
+ {    1,   1, 864, 525,1270, 600,  50,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_ExtPALData[]=
+{
+ {    2,   1,1080, 463,1270, 500,  50,   0,  50},
+ {   15,   7,1152, 413,1270, 500,  50,   0,  50},
+ {    2,   1,1080, 463,1270, 500,  50,   0,  50},
+ {   15,   7,1152, 413,1270, 500,  50,   0,  50},
+ {    2,   1, 900, 543,1270, 500,   0,   0,  50},
+ {    4,   3,1080, 663,1270, 500, 438,   0, 438},
+ {    1,   1,1125, 831,1270, 500, 686,   0, 686},     /*301b*/
+ {    3,   2,1080, 619,1270, 540, 438,   0, 438}
+};
+
+XGI330_TVDataStruct  XGI_StNTSCData[]=
+{
+ {    1,   1, 858, 525,1270, 400,  50,   0, 760},
+ {    1,   1, 858, 525,1270, 350,  50,   0, 640},
+ {    1,   1, 858, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 480,   0,   0, 760}
+};
+
+XGI330_TVDataStruct  XGI_ExtNTSCData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1270, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1270, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1270, 420,   0,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_St1HiTVData[]=
+{
+    	{        1,1,892,563,690,800,0,0,0               }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
+        {        1,1,1000,563,785,800,0,0,0              }, /* 02 (360x400,720x400) */
+        {        1,1,1000,563,785,700,0,0,0              }, /* 03 (720x350) */
+        {        1,1,892,563,690,960,0,0,0               }, /* 04 (320x240,640x480) */
+        {        8,5,1050,683,1648,960,0x150,1,0         }  /* 05 (400x300,800x600) */
+};
+
+XGI330_TVDataStruct  XGI_St2HiTVData[]=
+{
+        {        3,1,840,483,1648,960,0x032,0,0          }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
+        {        3,1,840,483,1648,960,0x032,0,0          }, /* 02 (360x400,720x400) */
+        {        1,1,1000,563,785,700,0,0,0              }, /* 03 (720x350) */
+        {        5,2,840,563,1648,960,0x08D,1,0          }, /* 04 (320x240,640x480) */
+        {        8,5,1050,683,1648,960,0x17C,1,0         }  /* 05 (400x300,800x600) */
+
+};
+
+XGI330_TVDataStruct  XGI_ExtHiTVData[]=
+{
+        {        6,1,840,563,1632,960,0,0,0              }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        3,1,960,563,1632,960,0,0,0              }, /* 01 (320x350,640x350) */
+        {        3,1,840,483,1632,960,0,0,0              }, /* 02 (360x400,720x400) */
+        {        3,1,960,563,1632,960,0,0,0              }, /* 03 (720x350) */
+        {        5,1,840,563,1648,960,0x166,1,0          }, /* 04 (320x240,640x480) */
+        {        16,5,1050,683,1648,960,0x143,1,0        }, /* 05 (400x300,800x600) */
+        {        25,12,1260,851,1648,960,0x032,0,0       }, /* 06 (512x384,1024x768) */
+        {        5,4,1575,1124,1648,960,0x128,0,0        }, /* 07 (1280x1024) */
+        {        4,1,1050,563,1548,960,0x143,1,0         }, /* 08 (800x480) */
+        {        5,2,1400,659,1648,960,0x032,0,0         }, /* 09 (1024x576) */
+        {        8,5,1750,803,1648,960,0x128,0,0         }  /* 0A (1280x720) */
+
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr525iData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1250, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1250, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1250, 420,   0,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_StYPbPr525iData[]=
+{
+ {    1,   1, 858, 525,1270, 400,  50,   0, 760},
+ {    1,   1, 858, 525,1270, 350,  50,   0, 640},
+ {    1,   1, 858, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 480,   0,   0, 760},
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr525pData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1270, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1270, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1270, 420,   0,   0,   0}
+ };
+
+XGI330_TVDataStruct  XGI_StYPbPr525pData[]=
+{
+ {    1,   1,1716, 525,1270, 400,  50,   0, 760},
+ {    1,   1,1716, 525,1270, 350,  50,   0, 640},
+ {    1,   1,1716, 525,1270, 400,   0,   0, 720},
+ {    1,   1,1716, 525,1270, 350,   0,   0, 720},
+ {    1,   1,1716, 525,1270, 480,   0,   0, 760},
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr750pData[]=
+{
+ {    3,   1, 935, 470,1130, 680,  50,   0,   0},       /* 00 (320x200,320x400,640x200,640x400) */
+ {   24,   7, 935, 420,1130, 680,  50,   0,   0},       /* 01 (320x350,640x350) */
+ {    3,   1, 935, 470,1130, 680,  50,   0,   0},       /* 02 (360x400,720x400) */
+ {   24,   7, 935, 420,1130, 680,  50,   0,   0},       /* 03 (720x350) */
+ {    2,   1,1100, 590,1130, 640,  50,   0,   0},       /* 04 (320x240,640x480) */
+ {    3,   2,1210, 690,1130, 660,  50,   0,   0},       /* 05 (400x300,800x600) */
+ {    1,   1,1375, 878,1130, 640, 638,   0,   0},       /* 06 (1024x768) */
+ {    2,   1, 858, 503,1130, 480,   0,   1,   0},        /* 07 (720x480) */
+ {    5,   4,1815, 570,1130, 660,  50,   0,   0},
+ {    5,   3,1100, 686,1130, 640,  50,   1,   0},
+ {   10,   9,1320, 830,1130, 640,  50,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_StYPbPr750pData[]=
+{
+ {    1,   1,1650, 750,1280, 400,  50,   0, 760},
+ {    1,   1,1650, 750,1280, 350,  50,   0, 640},
+ {    1,   1,1650, 750,1280, 400,   0,   0, 720},
+ {    1,   1,1650, 750,1280, 350,   0,   0, 720},
+ {    1,   1,1650, 750,1280, 480,   0,   0, 760},
+};
+
+UCHAR XGI330_NTSCTiming[] = {
+  0x17,0x1d,0x03,0x09,0x05,0x06,0x0c,0x0c,
+  0x94,0x49,0x01,0x0a,0x06,0x0d,0x04,0x0a,
+  0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x1b,
+  0x0c,0x50,0x00,0x97,0x00,0xda,0x4a,0x17,
+  0x7d,0x05,0x4b,0x00,0x00,0xe2,0x00,0x02,
+  0x03,0x0a,0x65,0x9d,0x08,0x92,0x8f,0x40,
+  0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x50,
+  0x00,0x40,0x44,0x00,0xdb,0x02,0x3b,0x00};
+
+UCHAR XGI330_PALTiming[] = {
+  0x21,0x5A,0x35,0x6e,0x04,0x38,0x3d,0x70,
+  0x94,0x49,0x01,0x12,0x06,0x3e,0x35,0x6d,
+  0x06,0x14,0x3e,0x35,0x6d,0x00,0x45,0x2b,
+  0x70,0x50,0x00,0x9b,0x00,0xd9,0x5d,0x17,
+  0x7d,0x05,0x45,0x00,0x00,0xe8,0x00,0x02,
+  0x0d,0x00,0x68,0xb0,0x0b,0x92,0x8f,0x40,
+  0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x63,
+  0x00,0x40,0x3e,0x00,0xe1,0x02,0x28,0x00};
+
+UCHAR XGI330_HiTVExtTiming[] =
+{
+      0x2D,0x60,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+      0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+      0x8E,0x8E,0x82,0x07,0x0B,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x3D,0x63,0x4F,
+      0x27,0x00,0xfc,0xff,0x6a,0x00
+
+};
+
+UCHAR XGI330_HiTVSt1Timing[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x65,0x90,0x7B,0xA8,0x03,0xF0,0x87,0x03,
+      0x11,0x15,0x11,0xCF,0x10,0x11,0xCF,0x10,
+      0x35,0x35,0x3B,0x69,0x1D,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x04,0x86,0xAF,0x5D,
+      0x0E,0x00,0xfc,0xff,0x2d,0x00
+};
+
+UCHAR XGI330_HiTVSt2Timing[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+      0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+      0x8E,0x8E,0x82,0x07,0x0B,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x3D,0x63,0x4F,
+      0x27,0x00,0xFC,0xff,0x6a,0x00
+};
+
+UCHAR XGI330_HiTVTextTiming[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x65,0x90,0xE7,0xBC,0x03,0x0C,0x97,0x03,
+      0x14,0x78,0x14,0x08,0x20,0x14,0x08,0x20,
+      0xC8,0xC8,0x3B,0xD2,0x26,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x04,0x96,0x72,0x5C,
+      0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr750pTiming[] =
+{
+      0x30,0x1d,0xe8,0x09,0x09,0xed,0x0c,0x0c,
+      0x98,0x0a,0x01,0x0c,0x06,0x0d,0x04,0x0a,
+      0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+      0xed,0x50,0x70,0x9f,0x16,0x59,0x60,0x13,
+      0x27,0x0b,0x27,0xfc,0x30,0x27,0x1c,0xb0,
+      0x4b,0x4b,0x6f,0x2f,0x63,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x73,0x00,0x40,
+      0x11,0x00,0xfc,0xff,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525pTiming[] =
+{
+      0x3E,0x11,0x06,0x09,0x0b,0x0c,0x0c,0x0c,
+      0x98,0x0a,0x01,0x0d,0x06,0x0d,0x04,0x0a,
+      0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+      0x0c,0x50,0xb2,0x9f,0x16,0x59,0x4f,0x13,
+      0xad,0x11,0xad,0x1d,0x40,0x8a,0x3d,0xb8,
+      0x51,0x5e,0x60,0x49,0x7d,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x4B,0x43,0x41,
+      0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525iTiming[] =
+{
+      0x1B,0x21,0x03,0x09,0x05,0x06,0x0C,0x0C,
+      0x94,0x49,0x01,0x0A,0x06,0x0D,0x04,0x0A,
+      0x06,0x14,0x0D,0x04,0x0A,0x00,0x85,0x1B,
+      0x0C,0x50,0x00,0x97,0x00,0xDA,0x4A,0x17,
+      0x7D,0x05,0x4B,0x00,0x00,0xE2,0x00,0x02,
+      0x03,0x0A,0x65,0x9D,0x08,
+      0x92,0x8F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x4B,0x00,0x40,
+      0x44,0x00,0xDB,0x02,0x3B,0x00
+
+};
+
+UCHAR XGI330_HiTVGroup3Data[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x5F,
+      0x05,0x21,0xB2,0xB2,0x55,0x77,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x2E,0x58,0x48,0x72,0x44,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x4F,0x7F,0x03,0xA8,0x7D,0x20,0x1A,0xA9,
+      0x14,0x05,0x03,0x7E,0x64,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Simu[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x95,
+      0xDB,0x20,0xB8,0xB8,0x55,0x47,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x15,0x26,0xD3,0xE4,0x11,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x67,0x36,0x01,0x47,0x0E,0x10,0xBE,0xB4,
+      0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Text[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0xA7,
+      0xF5,0x20,0xCE,0xCE,0x55,0x47,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x18,0x2C,0x0C,0x20,0x22,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x93,0x3C,0x01,0x50,0x2F,0x10,0xF4,0xCA,
+      0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_Ren525pGroup3[] =
+{
+  0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x13,
+  0xB1,0x41,0x62,0x62,0xFF,0xF4,0x45,0xa6,
+  0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+  0xAC,0xDA,0x60,0xFe,0x6A,0x9A,0x06,0x10,
+  0xd1,0x04,0x18,0x0a,0xFF,0x80,0x00,0x80,
+  0x3c,0x77,0x00,0xEF,0xE0,0x10,0xB0,0xE0,
+  0x10,0x4F,0x0F,0x0F,0x05,0x0F,0x08,0x6E,
+  0x1a,0x1F,0x25,0x2a,0x4C,0xAA,0x01
+};
+
+UCHAR XGI330_Ren750pGroup3[] =
+{
+  0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x7a,
+  0x54,0x41,0xE7,0xE7,0xFF,0xF4,0x45,0xa6,
+  0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+  0xAC,0x6A,0x60,0x2b,0x52,0xCD,0x61,0x10,
+  0x51,0x04,0x18,0x0a,0x1F,0x80,0x00,0x80,
+  0xFF,0xA4,0x04,0x2B,0x94,0x21,0x72,0x94,
+  0x26,0x05,0x01,0x0F,0xed,0x0F,0x0A,0x64,
+  0x18,0x1D,0x23,0x28,0x4C,0xAA,0x01
+};
+
+XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[]=
+{
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS320x480Data_1[]=
+{
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 518,400, 525},
+ {1056, 628,400,525},
+ {400, 525,400,525},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_1[]=
+{
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 518,1060, 629},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_2[]=
+{
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_1[]=
+{
+ { 960 , 438 , 1344 , 806 } ,	/* 00 (320x200,320x400,640x200,640x400) */
+ { 960 , 388 , 1344 , 806 } ,	/* 01 (320x350,640x350) */
+ { 1040, 438 , 1344 , 806 } ,	/* 02 (360x400,720x400) */
+ { 1040, 388 , 1344 , 806 } ,	/* 03 (720x350) */
+ { 960 , 518 , 1344 , 806 } ,	/* 04 (320x240,640x480) */
+ {1120 , 638 , 1344 , 806 } ,	/* 05 (400x300,800x600) */
+ {1344 , 806 , 1344 , 806 }	/* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_1[]=
+{
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 522,1688, 1066},
+ {1208, 642,1688, 1066},
+ {1432, 810,1688, 1066},
+ {1688, 1066,1688, 1066}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+/*
+XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_1[]=
+{
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,518,1408,806},
+ {928,638,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_2[]=
+{
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_1[]=
+{
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 518,1344, 806},
+ {864, 638,1344, 806},
+ {1088, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_1[]=
+{
+ {1048,438,1688,806},
+ {1048,388,1688,806},
+ {1148,438,1688,806},
+ {1148,388,1688,806},
+ {1048,518,1688,806},
+ {1208,638,1688,806},
+ {1432,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_2[]=
+{
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+*/
+XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_1[]=
+{
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,496,1688,1066},
+ {1088,616,1688,1066},
+ {1312,784,1688,1066},
+ {1568,1040,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_2[]=
+{
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[]=
+{      /* ;;[ycchen] 12/05/02 LCDHTxLCDVT=2048x1320 */
+        {        1088,520,2048,1320      },/* 00 (320x200,320x400,640x200,640x400) */
+        {        1088,470,2048,1320      },/* 01 (320x350,640x350) */
+        {        1088,520,2048,1320      },/* 02 (360x400,720x400) */
+        {        1088,470,2048,1320      },/* 03 (720x350) */
+        {        1088,600,2048,1320      },/* 04 (320x240,640x480) */
+        {        1248,720,2048,1320      },/* 05 (400x300,800x600) */
+        {        1472,888,2048,1320      },/* 06 (512x384,1024x768) */
+        {        1728,1144,2048,1320     },/* 07 (640x512,1280x1024) */
+        {        1848,1170,2048,1320     },/* 08 (1400x1050) */
+        {        2048,1320,2048,1320     } /* 09 (1600x1200) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingData[]=
+{
+        {        800,449,800,449             }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        800,449,800,449             }, /* 01 (320x350,640x350) */
+        {        800,449,800,449             }, /* 02 (360x400,720x400) */
+        {        800,449,800,449             }, /* 03 (720x350) */
+        {        800,525,800,525             }, /* 04 (640x480x60Hz) */
+        {        1056,628,1056,628           }, /* 05 (800x600x60Hz) */
+        {        1344,806,1344,806           }, /* 06 (1024x768x60Hz) */
+        {        1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {        1688,1066,1688,1066         }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {        2160,1250,2160,1250         }, /* 09 (1600x1200x60Hz) */
+        {        1688,806,1688,806           }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[]=
+{
+	{960,438,1312,800  }, /* 00 (320x200,320x400,640x200,640x400) */
+        {960,388,1312,800  }, /* 01 (320x350,640x350) */
+        {1040,438,1312,800 }, /* 02 (360x400,720x400) */
+        {1040,388,1312,800 }, /* 03 (720x350) */
+        {928,512,1312,800  }, /* 04 (320x240,640x480) */
+        {1088,632,1312,800 }, /* 05 (400x300,800x600) */
+        {1312,800,1312,800 }, /* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[]=
+{
+        {1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+        {1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+        {1312,800,1312,800}, /* ; 03 (720x350) */
+        {1312,800,1312,800}, /* ; 04 (320x240,640x480) */
+        {1312,800,1312,800}, /* ; 05 (400x300,800x600) */
+        {1312,800,1312,800}, /* ; 06 (512x384,1024x768) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[]=
+{
+        {1048,442,1688,1066  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1048,392,1688,1066  }, /* ; 01 (320x350,640x350) */
+        {1128,442,1688,1066  }, /* ; 02 (360x400,720x400) */
+        {1128,392,1688,1066  }, /* ; 03 (720x350) */
+        {1048,522,1688,1066  }, /* ; 04 (320x240,640x480) */
+        {1208,642,1688,1066  }, /* ; 05 (400x300,800x600) */
+        {1432,810,1688,1066  }, /* ; 06 (512x384,1024x768) */
+        {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[]=
+{
+        {1688,1066,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1688,1066,1688,1066 }, /* ; 01 (320x350,640x350) */
+        {1688,1066,1688,1066 }, /* ; 02 (360x400,720x400) */
+        {1688,1066,1688,1066 }, /* ; 03 (720x350) */
+        {1688,1066,1688,1066 }, /* ; 04 (320x240,640x480) */
+        {1688,1066,1688,1066 }, /* ; 05 (400x300,800x600) */
+        {1688,1066,1688,1066 }, /* ; 06 (512x384,1024x768) */
+        {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[]=
+{
+        {800,449,800,449     }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {800,449,800,449     }, /* ; 01 (320x350,640x350) */
+        {900,449,900,449     }, /* ; 02 (360x400,720x400) */
+        {900,449,900,449     }, /* ; 03 (720x350) */
+        {800,500,800,500     }, /* ; 04 (640x480x75Hz) */
+        {1056,625,1056,625   }, /* ; 05 (800x600x75Hz) */
+        {1312,800,1312,800   }, /* ; 06 (1024x768x75Hz) */
+        {1688,1066,1688,1066 }, /* ; 07 (1280x1024x75Hz) */
+        {1688,1066,1688,1066 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+        {2160,1250,2160,1250 }, /* ; 09 (1600x1200x75Hz) */
+        {1688,806,1688,806   }, /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[]=
+{
+	{      0,1048,   0, 771     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1048,   0, 771     }, /* 01 (320x350,640x350) */
+        {      0,1048,   0, 771     }, /* 02 (360x400,720x400) */
+        {      0,1048,   0, 771     }, /* 03 (720x350) */
+        {      0,1048,   0, 771     }, /* 04 (640x480x60Hz) */
+        {      0,1048,   0, 771     }, /* 05 (800x600x60Hz) */
+        {      0,1048, 805, 770     }  /* 06 (1024x768x60Hz) */
+} ;
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[]=
+{
+    	{      1142, 856, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1142, 856, 597, 562     }, /* 01 (320x350,640x350) */
+        {      1142, 856, 622, 587     }, /* 02 (360x400,720x400) */
+        {      1142, 856, 597, 562     }, /* 03 (720x350) */
+        {      1142,1048, 722, 687     }, /* 04 (640x480x60Hz) */
+        {      1232, 936, 722, 687     }, /* 05 (800x600x60Hz) */
+        {         0,1048, 805, 771     }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[]=
+{
+    	{       320,  24, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {       320,  24, 597, 562     }, /* 01 (320x350,640x350) */
+        {       320,  24, 622, 587     }, /* 02 (360x400,720x400) */
+        {       320,  24, 597, 562     }, /* 03 (720x350) */
+        {       320,  24, 722, 687     }  /* 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[]=
+{
+    	{      0,1328,    0, 1025     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1328,    0, 1025     }, /* 01 (320x350,640x350) */
+        {      0,1328,    0, 1025     }, /* 02 (360x400,720x400) */
+        {      0,1328,    0, 1025     }, /* 03 (720x350) */
+        {      0,1328,    0, 1025     }, /* 04 (640x480x60Hz) */
+        {      0,1328,    0, 1025     }, /* 05 (800x600x60Hz) */
+        {      0,1328,    0, 1025     }, /* 06 (1024x768x60Hz) */
+        {      0,1328, 1065, 1024     }  /* 07 (1280x1024x60Hz) */
+};
+
+ /* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[]=
+{
+    	{      1368,1008,752,711     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688     }, /* 01 (320x350,640x350) */
+        {      1408,1048,752,711     }, /* 02 (360x400,720x400) */
+        {      1408,1048,729,688     }, /* 03 (720x350) */
+        {      1368,1008,794,753     }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813     }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897     }, /* 06 (1024x768x60Hz) */
+        {      0000,1328,0,1025     }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[]=
+{
+    	{      0,1448,0,1051     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1448,0,1051     }, /* 01 (320x350,640x350) */
+        {      0,1448,0,1051     }, /* 02 (360x400,720x400) */
+        {      0,1448,0,1051     }, /* 03 (720x350) */
+        {      0,1448,0,1051     }, /* 04 (640x480x60Hz) */
+        {      0,1448,0,1051     }, /* 05 (800x600x60Hz) */
+        {      0,1448,0,1051     }, /* 06 (1024x768x60Hz) */
+        {      0,1448,0,1051     }, /* 07 (1280x1024x60Hz) */
+        {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[]=
+{
+    	{      1308,1068, 781, 766     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1308,1068, 781, 766     }, /* 01 (320x350,640x350) */
+        {      1308,1068, 781, 766     }, /* 02 (360x400,720x400) */
+        {      1308,1068, 781, 766     }, /* 03 (720x350) */
+        {      1308,1068, 781, 766     }, /* 04 (640x480x60Hz) */
+        {      1388,1148, 841, 826     }, /* 05 (800x600x60Hz) */
+        {      1490,1250, 925, 910     }, /* 06 (1024x768x60Hz) */
+        {      1608,1368,1053,1038     }, /* 07 (1280x1024x60Hz) */
+        {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[]=
+{
+    	{      0,1664,0,1201     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1664,0,1201     }, /* 01 (320x350,640x350) */
+        {      0,1664,0,1201     }, /* 02 (360x400,720x400) */
+        {      0,1664,0,1201     }, /* 03 (720x350) */
+        {      0,1664,0,1201     }, /* 04 (640x480x60Hz) */
+        {      0,1664,0,1201     }, /* 05 (800x600x60Hz) */
+        {      0,1664,0,1201     }, /* 06 (1024x768x60Hz) */
+        {      0,1664,0,1201     }, /* 07 (1280x1024x60Hz) */
+        {      0,1664,0,1201     }, /* 08 (1400x1050x60Hz) */
+        {      0,1664,0,1201     }  /* 09 (1600x1200x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct2  XGI_LVDSNoScalingDesData[]=
+{
+    	{     0, 648, 448, 405,  96,   2   }, /* 00 (320x200,320x400,640x200,640x400) */
+        {     0, 648, 448, 355,  96,   2   }, /* 01 (320x350,640x350) */
+        {     0, 648, 448, 405,  96,   2   }, /* 02 (360x400,720x400) */
+        {     0, 648, 448, 355,  96,   2   }, /* 03 (720x350) */
+        {     0, 648,  1, 483,  96,   2   }, /* 04 (640x480x60Hz) */
+        {     0, 840, 627, 600, 128,   4   }, /* 05 (800x600x60Hz) */
+        {     0,1048, 805, 770, 136,   6   }, /* 06 (1024x768x60Hz) */
+        {     0,1328,0,1025, 112,   3   }, /* 07 (1280x1024x60Hz) */
+        {     0,1438,0,1051, 112,   3   }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {     0,1664,0,1201, 192,   3   }, /* 09 (1600x1200x60Hz) */
+        {     0,1328,0,0771, 112,   6   }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[]=			/* ; 1024x768 Full-screen */
+{
+        {0,1040,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {0,1040,0,769}, /* ; 01 (320x350,640x350) */
+        {0,1040,0,769}, /* ; 02 (360x400,720x400) */
+        {0,1040,0,769}, /* ; 03 (720x350) */
+        {0,1040,0,769}, /* ; 04 (640x480x75Hz) */
+        {0,1040,0,769}, /* ; 05 (800x600x75Hz) */
+        {0,1040,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[]= /* ; 1024x768 center-screen (Enh. Mode) */
+{
+        {1142, 856,622,587 }, /* 00 (320x200,320x400,640x200,640x400) */
+        {1142, 856,597,562 }, /* 01 (320x350,640x350) */
+        {1142, 856,622,587 }, /* 02 (360x400,720x400) */
+        {1142, 856,597,562 }, /* 03 (720x350) */
+        {1142,1048,722,687 }, /* 04 (640x480x60Hz) */
+        {1232, 936,722,687 }, /* 05 (800x600x60Hz) */
+        {   0,1048,805,771 }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[]= /* ; 1024x768 center-screen (St.Mode) */
+{
+        {320,24,622,587  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {320,24,597,562  }, /* ; 01 (320x350,640x350) */
+        {320,24,622,587  }, /* ; 02 (360x400,720x400) */
+        {320,24,597,562  }, /* ; 03 (720x350) */
+        {320,24,722,687  } /* ; 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[]=
+{
+        {0,1296,0,1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {0,1296,0,1025}, /* ; 01 (320x350,640x350) */
+        {0,1296,0,1025}, /* ; 02 (360x400,720x400) */
+        {0,1296,0,1025}, /* ; 03 (720x350) */
+        {0,1296,0,1025}, /* ; 04 (640x480x75Hz) */
+        {0,1296,0,1025}, /* ; 05 (800x600x75Hz) */
+        {0,1296,0,1025}, /* ; 06 (1024x768x75Hz) */
+        {0,1296,0,1025} /* ; 07 (1280x1024x75Hz) */
+};
+
+/* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[]=   /* [ycchen] 02/18/03 Set DE as default */
+{
+        {1368,976,752,711 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,976,729,688 }, /* ; 01 (320x350,640x350) */
+        {1408,976,752,711 }, /* ; 02 (360x400,720x400) */
+        {1408,976,729,688 }, /* ; 03 (720x350) */
+        {1368,976,794,753 }, /* ; 04 (640x480x75Hz) */
+        {1448,1036,854,813}, /* ; 05 (800x600x75Hz) */
+        {1560,1168,938,897}, /* ; 06 (1024x768x75Hz) */
+        {0,1296,0,1025    } /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[]=  /* Scaling LCD 75Hz */
+{
+       { 0,648,448,405,96,2  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+       { 0,648,448,355,96,2  }, /* ; 01 (320x350,640x350) */
+       { 0,729,448,405,108,2 }, /* ; 02 (360x400,720x400) */
+       { 0,729,448,355,108,2 }, /* ; 03 (720x350) */
+       { 0,656,0,481,64,3    }, /* ; 04 (640x480x75Hz) */
+       { 0,816,0,601,80,3    }, /* ; 05 (800x600x75Hz) */
+       { 0,1040,0,769,96,3   }, /* ; 06 (1024x768x75Hz) */
+       { 0,1296,0,1025,144,3 }, /* ; 07 (1280x1024x75Hz) */
+       { 0,1448,0,1051,112,3 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+       { 0,1664,0,1201,192,3 }, /* ; 09 (1600x1200x75Hz) */
+       { 0,1328,0,771,112,6  }  /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS640x480Data_1[]=
+{
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 525, 800, 525},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVUNTSCData[]=
+{
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {784, 600, 784, 600},
+ {1064, 750,1064, 750}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVONTSCData[]=
+{
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {784, 525, 784, 525},
+ {1040, 700,1040, 700}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVUPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 750, 840, 750},
+ {936, 836, 936, 836}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVOPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 625, 840, 625},
+ {960, 750, 960, 750}
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_1_H[]=
+{
+	        /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }}, /* 00 (320x) */
+                {{      0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }}, /* 01 (360x) */
+                {{      0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }}, /* 02 (400x) */
+                {{      0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 04 (640x) */
+                {{      0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 05 (720x) */
+                {{      0x87,0x63,0x8B,0x69,0x1A,0x00,0x26,0x00 }}, /* 06 (800x) */
+                {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_1_H[]=
+{
+		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 00 (320x) */
+                {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+                {{      0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 04 (640x) */
+                {{      0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 05 (720x) */
+                {{      0x92,0x63,0x96,0x6C,0x1A,0x00,0x06,0x00 }}, /* 06 (800x) */
+                {{      0xAE,0x7F,0x92,0x88,0x96,0x00,0x02,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_2_H[]=
+{
+		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 00 (320x) */
+                {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 01 (360x) */
+                {{      0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 04 (640x) */
+                {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 05 (720x) */
+                {{      0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }}, /* 06 (800x) */
+                {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_2_H[]=
+{
+                /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 00 (320x) */
+                {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 01 (360x) */
+                {{      0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 04 (640x) */
+                {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 05 (720x) */
+                {{      0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }}, /* 06 (800x) */
+                {{      0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[]=
+{               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x47,0x27,0x8B,0x2C,0x1A,0x00,0x05,0x00 }}, /* 00 (320x) */
+                {{      0x47,0x27,0x8B,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+                {{      0x51,0x31,0x95,0x36,0x04,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x5F,0x3F,0x83,0x44,0x92,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 04 (640x) */
+                {{      0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 05 (720x) */
+                {{      0x83,0x63,0x87,0x68,0x16,0x00,0x06,0x00 }}, /* 06 (800x) */
+                {{      0x9F,0x7F,0x83,0x84,0x92,0x00,0x02,0x00 }}, /* 07 (1024x) */
+                {{      0xBF,0x9F,0x83,0xA4,0x12,0x00,0x07,0x00 }}, /* 08 (1280x) */
+                {{      0xCE,0xAE,0x92,0xB3,0x01,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[]=
+{               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 00 (320x) */
+                {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 01 (360x) */
+                {{      0x76,0x31,0x9A,0x48,0x9F,0x00,0x41,0x00 }}, /* 02 (400x) */
+                {{      0x76,0x3F,0x9A,0x4F,0x96,0x00,0x41,0x00 }}, /* 03 (512x) */
+                {{      0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 04 (640x) */
+                {{      0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 05 (720x) */
+                {{      0xCE,0x63,0x92,0x96,0x04,0x00,0x07,0x00 }}, /* 06 (800x) */
+                {{      0xCE,0x7F,0x92,0xA4,0x12,0x00,0x07,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xB4,0x02,0x00,0x03,0x00 }}, /* 08 (1280x) */
+                {{      0xCE,0xAE,0x92,0xBC,0x0A,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[]=
+/* ;302lv channelA [ycchen] 12/05/02 LCDHT=2048 */
+{   /* ; CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 00 (320x) */
+                {{      0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 01 (360x) */
+                {{      0x65,0x31,0x89,0x3C,0x94,0x00,0x01,0x00 }},/* 02 (400x) */
+                {{      0x73,0x3F,0x97,0x4A,0x82,0x00,0x05,0x00 }},/* 03 (512x) */
+                {{      0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 04 (640x) */
+		{{      0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 05 (720x) */
+		{{      0x97,0x63,0x9B,0x65,0x1D,0x00,0x06,0xF0 }},/* 06 (800x) */
+		{{      0xB3,0x7F,0x97,0x81,0x99,0x00,0x02,0x00 }},/* 07 (1024x) */
+		{{      0xD3,0x9F,0x97,0xA1,0x19,0x00,0x07,0x00 }},/* 08 (1280x) */
+		{{      0xE2,0xAE,0x86,0xB9,0x91,0x00,0x03,0x00 }},/* 09 (1400x) */
+		{{      0xFB,0xC7,0x9F,0xC9,0x81,0x00,0x07,0x00 }} /* 0A (1600x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+                {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }}, /* 00 (x350) */
+                {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }}, /* 01 (x400) */
+                {{      0x04,0x3E,0xE2,0x89,0xDF,0x05,0x00      }}, /* 02 (x480) */
+                {{      0x7C,0xF0,0x5A,0x8F,0x57,0x7D,0xA0      }}, /* 03 (x600) */
+                {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }}, /* 00 (x350) */
+                {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }}, /* 01 (x400) */
+                {{      0x24,0xBB,0x72,0x88,0xDF,0x25,0x30      }}, /* 02 (x480) */
+                {{      0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0      }}, /* 03 (x600) */
+                {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{       0x86,0x1F,0x5E,0x82,0x5D,0x87,0x00     }}, /* 00 (x350) */
+                {{       0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30     }}, /* 01 (x400) */
+                {{       0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00     }}, /* 02 (x480) */
+                {{       0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0     }}, /* 03 (x600) */
+                {{       0x28,0xF5,0x00,0x84,0xFF,0x29,0x90     }}, /* 04 (x768) */
+                {{       0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1      }}, /* 00 (x350) */
+                {{      0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81      }}, /* 01 (x400) */
+                {{      0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1      }}, /* 02 (x480) */
+                {{      0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91      }}, /* 03 (x600) */
+                {{      0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91      }}, /* 04 (x768) */
+                {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x6C,0x1F,0x60,0x84,0x5D,0x6D,0x10      }}, /* 00 (x350) */
+                {{      0x9E,0x1F,0x93,0x86,0x8F,0x9F,0x30      }}, /* 01 (x400) */
+                {{      0xEE,0x1F,0xE2,0x86,0xDF,0xEF,0x10      }}, /* 02 (x480) */
+                {{      0x66,0xF0,0x5A,0x8e,0x57,0x67,0xA0      }}, /* 03 (x600) */
+                {{      0x0E,0xF5,0x02,0x86,0xFF,0x0F,0x90      }}, /* 04 (x768) */
+                {{      0x0E,0x5A,0x02,0x86,0xFF,0x0F,0x89      }}, /* 05 (x1024) */
+                {{      0x28,0x10,0x1A,0x80,0x19,0x29,0x0F      }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[]=
+{              /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x28,0x92,0xB6,0x83,0xB5,0xCF,0x81      }}, /* 00 (x350) */
+                {{      0x28,0x92,0xD5,0x82,0xD4,0xEE,0x81      }}, /* 01 (x400) */
+                {{      0x28,0x92,0xFD,0x8A,0xFC,0x16,0xB1      }}, /* 02 (x480) */
+                {{      0x28,0xD4,0x39,0x86,0x57,0x29,0x81      }}, /* 03 (x600) */
+                {{      0x28,0xD4,0x8D,0x9A,0xFF,0x29,0xA1      }}, /* 04 (x768) */
+                {{      0x28,0x5A,0x0D,0x9A,0xFF,0x29,0xA9      }}, /* 05 (x1024) */
+                {{      0x28,0x10,0x1A,0x87,0x19,0x29,0x8F      }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[]=
+{
+               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+                {{      0xd4,0x1F,0x81,0x84,0x5D,0xd5,0x10      }}, /* 00 (x350) */
+                {{      0x06,0x3e,0xb3,0x86,0x8F,0x07,0x20      }}, /* 01 (x400) */
+                {{      0x56,0xba,0x03,0x86,0xDF,0x57,0x00      }}, /* 02 (x480) */
+                {{      0xce,0xF0,0x7b,0x8e,0x57,0xcf,0xa0      }}, /* 03 (x600) */
+                {{      0x76,0xF5,0x23,0x86,0xFF,0x77,0x90      }}, /* 04 (x768) */
+                {{      0x76,0x5A,0x23,0x86,0xFF,0x77,0x89      }}, /* 05 (x1024) */
+                {{      0x90,0x10,0x1A,0x8E,0x19,0x91,0x2F      }}, /* 06 (x1050) */
+                {{      0x26,0x11,0xd3,0x86,0xaF,0x27,0x3f      }} /* 07 (x1200) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[]=
+{ 	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }},/* ; 00 (320x) */
+    {{      0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }},/* ; 01 (360x) */
+    {{      0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }},/* ; 02 (400x) */
+    {{      0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 04 (640x) */
+    {{      0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 05 (720x) */
+    {{      0x83,0x63,0x87,0x68,0x14,0x00,0x26,0x00 }},/* ; 06 (800x) */
+    {{      0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[]=
+{	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+    {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }},/* ; 00 (x350) */
+    {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }},/* ; 01 (x400) */
+    {{      0xFE,0x1F,0xE0,0x84,0xDF,0xFF,0x10      }},/* ; 02 (x480) */
+    {{      0x76,0xF0,0x58,0x8C,0x57,0x77,0xA0      }},/* ; 03 (x600) */
+    {{      0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90      }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[]=
+{       /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 00 (320x) */
+    {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 01 (360x) */
+    {{      0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 04 (640x) */
+    {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 05 (720x) */
+    {{      0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }},/* ; 06 (800x) */
+    {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[]=
+{       /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+    {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }},/* ; 00 (x350) */
+    {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }},/* ; 01 (x400) */
+    {{      0x24,0xBB,0x72,0x88,0xDF,0x25,0x30      }},/* ; 02 (x480) */
+    {{      0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0      }},/* ; 03 (x600) */
+    {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[]=
+{      /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 00 (320x) */
+    {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 01 (360x) */
+    {{      0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 04 (640x) */
+    {{      0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 05 (720x) */
+    {{      0x92,0x63,0x96,0x68,0x1A,0x00,0x06,0x00 }},/* ; 06 (800x) */
+    {{      0xAE,0x7F,0x92,0x84,0x96,0x00,0x02,0x00 }},/* ; 07 (1024x) */
+    {{      0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[]=
+{	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+    {{      0x86,0xD1,0xBC,0x80,0xBB,0xE5,0x00      }},/* ; 00 (x350) */
+    {{      0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30      }},/* ; 01 (x400) */
+    {{      0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00      }},/* ; 02 (x480) */
+    {{      0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0      }},/* ; 03 (x600) */
+    {{      0x28,0xF5,0x00,0x84,0xFF,0x29,0x90      }},/* ; 04 (x768) */
+    {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[]=
+{
+	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 00 (320x) */
+    {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 01 (360x) */
+    {{      0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 04 (640x) */
+    {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 05 (720x) */
+    {{      0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }},/* ; 06 (800x) */
+    {{      0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }},/* ; 07 (1024x) */
+    {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[]=
+{
+        /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+     {{     0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1     }},/* ; 00 (x350) */
+     {{     0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81     }},/* ; 01 (x400) */
+     {{     0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1     }},/* ; 02 (x480) */
+     {{     0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91     }},/* ; 03 (x600) */
+     {{     0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91     }},/* ; 04 (x768) */
+     {{     0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UNTSC[]=
+{
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x53,0x9c,0x56,0xba,
+    0x18,0x84,0xdf,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x80,0x63,0x84,0x6c,0x17,0xec,0xf0,
+   0x90,0x8c,0x57,0xed,0x20,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1ONTSC[]=
+{
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x56,0x9c,0x0b,0x3e,
+    0xe8,0x84,0xdf,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x7d,0x63,0x81,0x6a,0x16,0xba,0xf0,
+   0x7f,0x86,0x57,0xbb,0x00,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0xec,0xba,
+    0x50,0x84,0xdf,0xed,0x00,0x00,0x05,0x00 }},
+ {{0x70,0x63,0x94,0x68,0x8d,0x42,0xf1,
+   0xc8,0x8c,0x57,0xe9,0x20,0x00,0x05,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1OPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0x6f,0xba,
+    0x20,0x83,0xdf,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x73,0x63,0x97,0x69,0x8e,0xec,0xf0,
+   0x90,0x8c,0x57,0xed,0x20,0x00,0x05,0x01 }}
+};
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataTablStruct XGI_LCDDataTable[]=
+{
+  {Panel1024x768,0x0019,0x0001,0},  /* XGI_ExtLCD1024x768Data */
+  {Panel1024x768,0x0019,0x0000,1},  /* XGI_StLCD1024x768Data */
+  {Panel1024x768,0x0018,0x0010,2},  /* XGI_CetLCD1024x768Data */
+  {Panel1280x1024,0x0019,0x0001,3},  /* XGI_ExtLCD1280x1024Data */
+  {Panel1280x1024,0x0019,0x0000,4},  /* XGI_StLCD1280x1024Data */
+  {Panel1280x1024,0x0018,0x0010,5},  /* XGI_CetLCD1280x1024Data */
+  {Panel1400x1050,0x0019,0x0001,6},  /* XGI_ExtLCD1400x1050Data */
+  {Panel1400x1050,0x0019,0x0000,7},  /* XGI_StLCD1400x1050Data */
+  {Panel1400x1050,0x0018,0x0010,8},  /* XGI_CetLCD1400x1050Data */
+  {Panel1600x1200,0x0019,0x0001,9},   /* XGI_ExtLCD1600x1200Data */
+  {Panel1600x1200,0x0019,0x0000,10},  /* XGI_StLCD1600x1200Data */
+  {PanelRef60Hz,0x0008,0x0008,11},  	/* XGI_NoScalingData */
+  {Panel1024x768x75,0x0019,0x0001,12}, 	/* XGI_ExtLCD1024x768x75Data */
+  {Panel1024x768x75,0x0019,0x0000,13}, 	/* XGI_StLCD1024x768x75Data */
+  {Panel1024x768x75,0x0018,0x0010,14}, 	/* XGI_CetLCD1024x768x75Data */
+  {Panel1280x1024x75,0x0019,0x0001,15}, /* XGI_ExtLCD1280x1024x75Data */
+  {Panel1280x1024x75,0x0019,0x0000,16}, /* XGI_StLCD1280x1024x75Data */
+  {Panel1280x1024x75,0x0018,0x0010,17}, /* XGI_CetLCD1280x1024x75Data */
+  {PanelRef75Hz,0x0008,0x0008,18},	/* XGI_NoScalingDatax75 */
+  {0xFF,0x0000,0x0000,0}   		/* End of table */
+};
+
+XGI330_LCDDataTablStruct XGI_LCDDesDataTable[]=
+{
+  {Panel1024x768,0x0019,0x0001,0}, /* XGI_ExtLCDDes1024x768Data */
+  {Panel1024x768,0x0019,0x0000,1}, /* XGI_StLCDDes1024x768Data */
+  {Panel1024x768,0x0018,0x0010,2}, /* XGI_CetLCDDes1024x768Data */
+  {Panel1280x1024,0x0019,0x0001,3}, /* XGI_ExtLCDDes1280x1024Data */
+  {Panel1280x1024,0x0019,0x0000,4}, /* XGI_StLCDDes1280x1024Data */
+  {Panel1280x1024,0x0018,0x0010,5}, /* XGI_CetLCDDes1280x1024Data */
+  {Panel1400x1050,0x0019,0x0001,6}, /* XGI_ExtLCDDes1400x1050Data */
+  {Panel1400x1050,0x0019,0x0000,7}, /* XGI_StLCDDes1400x1050Data */
+  {Panel1400x1050,0x0418,0x0010,8}, /* XGI_CetLCDDes1400x1050Data */
+  {Panel1400x1050,0x0418,0x0410,9}, /* XGI_CetLCDDes1400x1050Data2 */
+  {Panel1600x1200,0x0019,0x0001,10}, /* XGI_ExtLCDDes1600x1200Data */
+  {Panel1600x1200,0x0019,0x0000,11}, /* XGI_StLCDDes1600x1200Data */
+  {PanelRef60Hz,0x0008,0x0008,12}, 	/* XGI_NoScalingDesData */
+  {Panel1024x768x75,0x0019,0x0001,13}, 	/* XGI_ExtLCDDes1024x768x75Data */
+  {Panel1024x768x75,0x0019,0x0000,14},	/* XGI_StLCDDes1024x768x75Data */
+  {Panel1024x768x75,0x0018,0x0010,15},  /* XGI_CetLCDDes1024x768x75Data */
+  {Panel1280x1024x75,0x0019,0x0001,16},	/* XGI_ExtLCDDes1280x1024x75Data */
+  {Panel1280x1024x75,0x0019,0x0000,17}, /* XGI_StLCDDes1280x1024x75Data */
+  {Panel1280x1024x75,0x0018,0x0010,18},	/* XGI_CetLCDDes1280x1024x75Data */
+  {PanelRef75Hz,0x0008,0x0008,19},	/* XGI_NoScalingDesDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_H */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_H */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_H */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_H */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_H */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_H */
+  {Panel1600x1200,0x0018,0x0000,6},  /* XGI_LVDSCRT11600x1200_1_H */
+  {Panel1024x768x75,0x0018,0x0000,7},	/* XGI_LVDSCRT11024x768_1_Hx75 */
+  {Panel1024x768x75,0x0018,0x0010,8},	/* XGI_LVDSCRT11024x768_2_Hx75 */
+  {Panel1280x1024x75,0x0018,0x0000,9},	/* XGI_LVDSCRT11280x1024_1_Hx75 */
+  {Panel1280x1024x75,0x0018,0x0010,10},	/* XGI_LVDSCRT11280x1024_2_Hx75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_V */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_V */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_V */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_V */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_V */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_V */
+  {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDSCRT11600x1200_1_V */
+  {Panel1024x768x75,0x0018,0x0000,7},	/* XGI_LVDSCRT11024x768_1_Vx75 */
+  {Panel1024x768x75,0x0018,0x0010,8},	/* XGI_LVDSCRT11024x768_2_Vx75 */
+  {Panel1280x1024x75,0x0018,0x0000,9},	/* XGI_LVDSCRT11280x1024_1_Vx75 */
+  {Panel1280x1024x75,0x0018,0x0010,10},	/* XGI_LVDSCRT11280x1024_2_Vx75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Data_1 */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDS1024x768Data_2 */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDS1280x1024Data_1 */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDS1280x1024Data_2 */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDS1400x1050Data_1 */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDS1400x1050Data_2 */
+  {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDS1600x1200Data_1 */
+  {PanelRef60Hz,0x0008,0x0008,7}, /* XGI_LVDSNoScalingData */
+  {Panel1024x768x75,0x0018,0x0000,8},	/* XGI_LVDS1024x768Data_1x75 */
+  {Panel1024x768x75,0x0018,0x0010,9},	/* XGI_LVDS1024x768Data_2x75 */
+  {Panel1280x1024x75,0x0018,0x0000,10},	/* XGI_LVDS1280x1024Data_1x75 */
+  {Panel1280x1024x75,0x0018,0x0010,11}, /* XGI_LVDS1280x1024Data_2x75 */
+  {PanelRef75Hz,0x0008,0x0008,12},	/* XGI_LVDSNoScalingDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Des_1 */
+  {Panel1024x768,0x0618,0x0410,1}, /* XGI_LVDS1024x768Des_3 */
+  {Panel1024x768,0x0018,0x0010,2}, /* XGI_LVDS1024x768Des_2 */
+  {Panel1280x1024,0x0018,0x0000,3}, /* XGI_LVDS1280x1024Des_1 */
+  {Panel1280x1024,0x0018,0x0010,4}, /* XGI_LVDS1280x1024Des_2 */
+  {Panel1400x1050,0x0018,0x0000,5}, /* XGI_LVDS1400x1050Des_1 */
+  {Panel1400x1050,0x0018,0x0010,6}, /* XGI_LVDS1400x1050Des_2 */
+  {Panel1600x1200,0x0018,0x0000,7}, /* XGI_LVDS1600x1200Des_1 */
+  {PanelRef60Hz,0x0008,0x0008,8}, 	/* XGI_LVDSNoScalingDesData */
+  {Panel1024x768x75,0x0018,0x0000,9},	/* XGI_LVDS1024x768Des_1x75 */
+  {Panel1024x768x75,0x0618,0x0410,10},	/* XGI_LVDS1024x768Des_3x75 */
+  {Panel1024x768x75,0x0018,0x0010,11},	/* XGI_LVDS1024x768Des_2x75 */
+  {Panel1280x1024x75,0x0018,0x0000,12},	/* XGI_LVDS1280x1024Des_1x75 */
+  {Panel1280x1024x75,0x0018,0x0010,13},	/* XGI_LVDS1280x1024Des_2x75 */
+  {PanelRef75Hz,0x0008,0x0008,14},	/* XGI_LVDSNoScalingDesDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLCHLCDRegPtr[]=
+{
+  {Panel1024x768,0x0000,0x0000,0}, /* XGI_CH7017LV1024x768 */
+  {Panel1400x1050,0x0000,0x0000,1}, /* XGI_CH7017LV1400x1050 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_TVDataTablStruct XGI_TVDataTable[]=
+{
+ {0x09E1,0x0001,0},	/* XGI_ExtPALData */
+ {0x09E1,0x0000,1},	/* XGI_ExtNTSCData */
+ {0x09E1,0x0801,2},	/* XGI_StPALData */
+ {0x09E1,0x0800,3},	/* XGI_StNTSCData */
+ {0x49E0,0x0100,4},	/* XGI_ExtHiTVData */
+ {0x49E0,0x4100,5},	/* XGI_St2HiTVData */
+ {0x49E0,0x4900,13},	/* XGI_St1HiTVData */
+ {0x09E0,0x0020,6},	/* XGI_ExtYPbPr525iData */
+ {0x09E0,0x0040,7},	/* XGI_ExtYPbPr525pData */
+ {0x09E0,0x0080,8},	/* XGI_ExtYPbPr750pData */
+ {0x09E0,0x0820,9},	/* XGI_StYPbPr525iData */
+ {0x09E0,0x0840,10},	/* XGI_StYPbPr525pData */
+ {0x09E0,0x0880,11}, 	/* XGI_StYPbPr750pData */
+ {0xffff,0x0000,12}  	/* END */
+};
+
+USHORT TVLenList[]=
+{
+   LVDSCRT1Len_H,
+   LVDSCRT1Len_V,
+   LVDSDataLen,
+   0,
+   TVDataLen,
+   0,
+   0,
+   CHTVRegLen
+} ;
+
+/* Chrontel 7017 TV CRT1 Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVCRT1UNTSC */
+  {0x0011,0x0010,1}, /* XGI_CHTVCRT1ONTSC */
+  {0x0011,0x0001,2}, /* XGI_CHTVCRT1UPAL */
+  {0x0011,0x0011,3}, /* XGI_CHTVCRT1OPAL */
+  {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVUNTSCData */
+  {0x0011,0x0010,1}, /* XGI_CHTVONTSCData */
+  {0x0011,0x0001,2}, /* XGI_CHTVUPALData */
+  {0x0011,0x0011,3}, /* XGI_CHTVOPALData */
+  {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Reg. List */
+XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVRegUNTSC */
+  {0x0011,0x0010,1}, /* XGI_CHTVRegONTSC */
+  {0x0011,0x0001,2}, /* XGI_CHTVRegUPAL */
+  {0x0011,0x0011,3}, /* XGI_CHTVRegOPAL */
+  {0xFFFF,0x0000,4}
+};
+
+USHORT LCDLenList[]=
+{
+   LVDSCRT1Len_H,
+   LVDSCRT1Len_V,
+   LVDSDataLen,
+   LCDDesDataLen,
+   LCDDataLen,
+   LCDDesDataLen,
+   0,
+   LCDDesDataLen,
+   LCDDesDataLen,
+   0
+} ;
+
+XGI330_LCDCapStruct  XGI660_LCDDLCapList[]=  /* 660, Dual link */
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+		 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+                {Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+                {Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+                {Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+		 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+                {Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+                {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI_LCDDLCapList[]=  /* Dual link only */
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+		{Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+		{Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+		{Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+		 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+		{Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+		{0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI660_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+                {Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+                {Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+                {Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+                {Panel1600x1200, DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+		 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+                {Panel1280x1024x75,+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+                {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+		{Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+		{Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+		{Panel1600x1200, DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+		 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+		{Panel1280x1024x75, DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+		{0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI21_LVDSCapStruct XGI21_LCDCapList[]=
+{
+    {DisableLCD24bpp + LCDPolarity,
+     2160,1250,1600,1200,  64,  1,  192,   3,
+     0x70,0x24,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity,
+     1688,1066,1280,1024,  48,  1,  112,   3,
+     0x70,0x44,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+     1344, 806,1024, 768,  24,  3,  136,   6,
+     0x6C,0x65,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity,
+     1056, 628, 800, 600,  40,   1, 128,   4,
+     0x42,0xE2,0x20,0x14,0x0A,0x02,0x00
+    },
+    {DisableLCD24bpp + LCDPolarity,
+      928, 525, 800, 480,  40,  13,  48,   3,
+     0x52,0xC5,0x20,0x14,0x0A,0x02,0x00
+    },
+    {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+      800, 525, 640, 480,  16,  10,  96,   2,
+     0x1B,0xE1,0x20,0x04,0x0A,0x02,0xC8
+    }
+
+};
+
+XGI_Ext2Struct XGI330_RefIndex[]=
+{
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x59, 320, 200},/* 00 */
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x00, 320, 400},/* 01 */
+{Support32Bpp + SupportAllCRT2 + SyncNN,			RES320x240,	 VCLK25_175, 0x04,0x20,0x50, 320, 240},/* 02 */
+{Support32Bpp + SupportAllCRT2 + SyncPP,			RES400x300,	 VCLK40,     0x05,0x32,0x51, 400, 300},/* 03 */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024,		RES512x384,	 VCLK65,     0x06,0x43,0x52, 512, 384},/* 04 */
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES640x400,	 VCLK25_175, 0x00,0x14,0x2f, 640, 400},/* 05 */
+{Support32Bpp + SupportAllCRT2 + SyncNN,			RES640x480x60,	 VCLK25_175, 0x04,0x24,0x2e, 640, 480},/* 06 640x480x60Hz (LCD 640x480x60z) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES640x480x72,	 VCLK31_5,   0x04,0x24,0x2e, 640, 480},/* 07 640x480x72Hz (LCD 640x480x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES640x480x75,	 VCLK31_5,   0x47,0x24,0x2e, 640, 480},/* 08 640x480x75Hz (LCD 640x480x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncNN,			RES640x480x85,	 VCLK36,     0x8A,0x24,0x2e, 640, 480},/* 09 640x480x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x100,	 VCLK43_163, 0x00,0x24,0x2e, 640, 480},/* 0a 640x480x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x120,	 VCLK52_406, 0x00,0x24,0x2e, 640, 480},/* 0b 640x480x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x160,	 VCLK72_852, 0x00,0x24,0x2e, 640, 480},/* 0c 640x480x160Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncNN,			RES640x480x200,	 VCLK86_6,   0x00,0x24,0x2e, 640, 480},/* 0d 640x480x200Hz */
+{Support32Bpp + NoSupportLCD + SyncPP,				RES800x600x56,	 VCLK36,     0x05,0x36,0x6a, 800, 600},/* 0e 800x600x56Hz */
+{Support32Bpp + NoSupportTV + SyncPP,				RES800x600x60,	 VCLK40,     0x05,0x36,0x6a, 800, 600},/* 0f 800x600x60Hz (LCD 800x600x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES800x600x72,	 VCLK50,     0x48,0x36,0x6a, 800, 600},/* 10 800x600x72Hz (LCD 800x600x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES800x600x75,	 VCLK49_5,   0x8B,0x36,0x6a, 800, 600},/* 11 800x600x75Hz (LCD 800x600x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x600x85,	 VCLK56_25,  0x00,0x36,0x6a, 800, 600},/* 12 800x600x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x100,	 VCLK68_179, 0x00,0x36,0x6a, 800, 600},/* 13 800x600x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x120,	 VCLK83_95,  0x00,0x36,0x6a, 800, 600},/* 14 800x600x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x160,	 VCLK116_406,0x00,0x36,0x6a, 800, 600},/* 15 800x600x160Hz */
+{Support32Bpp + InterlaceMode + SyncPP,				RES1024x768x43,	 VCLK44_9,   0x00,0x47,0x37,1024, 768},/* 16 1024x768x43Hz */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024,		RES1024x768x60,	 VCLK65,     0x06,0x47,0x37,1024, 768},/* 17 1024x768x60Hz (LCD 1024x768x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES1024x768x70,	 VCLK75,     0x49,0x47,0x37,1024, 768},/* 18 1024x768x70Hz (LCD 1024x768x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1024x768x75,	 VCLK78_75,  0x00,0x47,0x37,1024, 768},/* 19 1024x768x75Hz (LCD 1024x768x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x768x85,	 VCLK94_5,   0x8C,0x47,0x37,1024, 768},/* 1a 1024x768x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x100, VCLK113_309,0x00,0x47,0x37,1024, 768},/* 1b 1024x768x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x120, VCLK139_054,0x00,0x47,0x37,1024, 768},/* 1c 1024x768x120Hz */
+{Support32Bpp + SupportLCD + SyncPP,				RES1280x960x60,	 VCLK108_2,  0x08,0x58,0x7b,1280, 960},/* 1d 1280x960x60Hz */
+{Support32Bpp + InterlaceMode + SyncPP,				RES1280x1024x43, VCLK78_75,  0x00,0x58,0x3a,1280,1024},/* 1e 1280x1024x43Hz */
+{Support32Bpp + NoSupportTV + SyncPP,				RES1280x1024x60, VCLK108_2,  0x07,0x58,0x3a,1280,1024},/* 1f 1280x1024x60Hz (LCD 1280x1024x60Hz) */
+{Support32Bpp + NoSupportTV + SyncPP,				RES1280x1024x75, VCLK135_5,  0x00,0x58,0x3a,1280,1024},/* 20 1280x1024x75Hz (LCD 1280x1024x75Hz) */
+{Support32Bpp + SyncPP,						RES1280x1024x85, VCLK157_5,  0x00,0x58,0x3a,1280,1024},/* 21 1280x1024x85Hz */
+{Support32Bpp + SupportLCD + SyncPP + SupportCRT2in301C,	RES1600x1200x60, VCLK162,    0x09,0x7A,0x3c,1600,1200},/* 22 1600x1200x60Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x65, VCLK175,    0x00,0x69,0x3c,1600,1200},/* 23 1600x1200x65Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x70, VCLK189,    0x00,0x69,0x3c,1600,1200},/* 24 1600x1200x70Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x75, VCLK202_5,  0x00,0x69,0x3c,1600,1200},/* 25 1600x1200x75Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x85, VCLK229_5,  0x00,0x69,0x3c,1600,1200},/* 26 1600x1200x85Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x100,VCLK269_655,0x00,0x69,0x3c,1600,1200},/* 27 1600x1200x100Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x120,VCLK323_586,0x00,0x69,0x3c,1600,1200},/* 28 1600x1200x120Hz */
+{Support32Bpp + SupportLCD + SyncNP,				RES1920x1440x60, VCLK234,    0x00,0x00,0x68,1920,1440},/* 29 1920x1440x60Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x65, VCLK254_817,0x00,0x00,0x68,1920,1440},/* 2a 1920x1440x65Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x70, VCLK277_015,0x00,0x00,0x68,1920,1440},/* 2b 1920x1440x70Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x75, VCLK291_132,0x00,0x00,0x68,1920,1440},/* 2c 1920x1440x75Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x85, VCLK330_615,0x00,0x00,0x68,1920,1440},/* 2d 1920x1440x85Hz */
+{Support16Bpp + SyncPN,						RES1920x1440x100,VCLK388_631,0x00,0x00,0x68,1920,1440},/* 2e 1920x1440x100Hz */
+{Support32Bpp + SupportLCD + SyncPN,				RES2048x1536x60, VCLK266_952,0x00,0x00,0x6c,2048,1536},/* 2f 2048x1536x60Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x65, VCLK291_766,0x00,0x00,0x6c,2048,1536},/* 30 2048x1536x65Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x70, VCLK315_195,0x00,0x00,0x6c,2048,1536},/* 31 2048x1536x70Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x75, VCLK340_477,0x00,0x00,0x6c,2048,1536},/* 32 2048x1536x75Hz */
+{Support16Bpp + SyncPN,						RES2048x1536x85, VCLK375_847,0x00,0x00,0x6c,2048,1536},/* 33 2048x1536x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES800x480x60,	 VCLK39_77,  0x08,0x00,0x70, 800, 480},/* 34 800x480x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x480x75,	 VCLK49_5,   0x08,0x00,0x70, 800, 480},/* 35 800x480x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x480x85,	 VCLK56_25,  0x08,0x00,0x70, 800, 480},/* 36 800x480x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES1024x576x60,	 VCLK65,     0x09,0x00,0x71,1024, 576},/* 37 1024x576x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x576x75,	 VCLK78_75,  0x09,0x00,0x71,1024, 576},/* 38 1024x576x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x576x85,	 VCLK94_5,   0x09,0x00,0x71,1024, 576},/* 39 1024x576x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES1280x720x60,	 VCLK108_2,  0x0A,0x00,0x75,1280, 720},/* 3a 1280x720x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1280x720x75,	 VCLK135_5,  0x0A,0x00,0x75,1280, 720},/* 3b 1280x720x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1280x720x85,	 VCLK157_5,  0x0A,0x00,0x75,1280, 720},/* 3c 1280x720x85Hz */
+{Support32Bpp + SupportTV + SyncNN,				RES720x480x60,	 VCLK28_322, 0x06,0x00,0x31, 720, 480},/* 3d 720x480x60Hz */
+{Support32Bpp + SupportTV + SyncPP,				RES720x576x56,	 VCLK36,     0x06,0x00,0x32, 720, 576},/* 3e 720x576x56Hz */
+{Support32Bpp + InterlaceMode + NoSupportLCD + SyncPP,		RES856x480x79I,	 VCLK35_2,   0x00,0x00,0x00, 856, 480},/* 3f 856x480x79I */
+{Support32Bpp + NoSupportLCD + SyncNN,				RES856x480x60,	 VCLK35_2,   0x00,0x00,0x00, 856, 480},/* 40 856x480x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1280x768x60,	 VCLK79_411, 0x08,0x48,0x23,1280, 768},/* 41 1280x768x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1400x1050x60, VCLK122_61, 0x08,0x69,0x26,1400,1050},/* 42 1400x1050x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1152x864x60,	 VCLK80_350, 0x37,0x00,0x20,1152, 864},/* 43 1152x864x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1152x864x75,	 VCLK107_385,0x37,0x00,0x20,1152, 864},/* 44 1152x864x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x75,	 VCLK125_999,0x3A,0x88,0x7b,1280, 960},/* 45 1280x960x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x85,	 VCLK148_5,  0x0A,0x88,0x7b,1280, 960},/* 46 1280x960x85Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x120, VCLK217_325,0x3A,0x88,0x7b,1280, 960},/* 47 1280x960x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x160, VCLK139_054,0x30,0x47,0x37,1024, 768},/* 48 1024x768x160Hz */
+};
+
+
+
+XGI330_VCLKDataStruct XGI330_VCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0xe2, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0xe2, 49}, /* 0x7 */
+ { 0x53,0xe2, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x6c,0xc3, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6e,0x46, 76}, /* 0x10 */
+ { 0x2b,0x61, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x41,104}, /* 0x17 */
+ { 0x3a,0x23,105}, /* 0x18 */
+ { 0x70,0x44,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0x54,0x42,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x62,0x06,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x60,0x36, 30}, /* 0x41 */
+ { 0x40,0x4A, 28}, /* 0x42 */
+ { 0x9F,0x46, 44}, /* 0x43 */
+ { 0x97,0x2C, 26}, /* 0x44 */
+ { 0x44,0xE4, 25}, /* 0x45 */
+ { 0x7E,0x32, 47}, /* 0x46 */
+ { 0x08,0x24, 31}, /* 0x47 */
+ { 0x97,0x2c, 26}, /* 0x48 */
+ { 0xCE,0x3c, 39}, /* 0x49 */
+ { 0x52,0x4A, 36}, /* 0x4a */
+ { 0x2C,0x61, 95}, /* 0x4b */
+ { 0x78,0x27,108}, /* 0x4c */
+ { 0x66,0x43,123},  /* 0x4d */
+ { 0x2c,0x61, 80},  /* 0x4e */
+ { 0x3b,0x61,108}  /* 0x4f */
+};
+
+XGI_VBVCLKDataStruct XGI330_VBVCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0x47, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0x47, 49}, /* 0x7 */
+ { 0x53,0x47, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x5a,0x64, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6d,0x46, 75}, /* 0x10 */
+ { 0x41,0x43, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x22,104}, /* 0x17 */
+ { 0x49,0x24,105}, /* 0x18 */
+ { 0xf8,0x2f,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0xd4,0x28,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x70,0x07,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x2e,0x48, 25}, /* 0x41 */
+ { 0x24,0x46, 25}, /* 0x42 */
+ { 0x26,0x64, 28}, /* 0x43 */
+ { 0x37,0x64, 40}, /* 0x44 */
+ { 0xa1,0x42,108}, /* 0x45 */
+ { 0x37,0x61,100}, /* 0x46 */
+ { 0x78,0x27,108}, /* 0x47 */
+ { 0x5e,0x64,68},  /* 0x48 chiawen for fuj1280x768*/
+ { 0x70,0x44,108}, /* 0x49 chiawen for 1400x1050*/
+};
+
+UCHAR XGI330_ScreenOffset[]={ 0x14,0x19,0x20,0x28,0x32,0x40,0x50,0x64,0x78,0x80,0x2d,0x35,0x57,0x48 };
+
+XGI_StResInfoStruct XGI330_StResInfo[]=
+{
+ { 640,400},
+ { 640,350},
+ { 720,400},
+ { 720,350},
+ { 640,480}
+};
+
+XGI_ModeResInfoStruct XGI330_ModeResInfo[]=
+{
+ {  320, 200, 8, 8},
+ {  320, 240, 8, 8},
+ {  320, 400, 8, 8},
+ {  400, 300, 8, 8},
+ {  512, 384, 8, 8},
+ {  640, 400, 8,16},
+ {  640, 480, 8,16},
+ {  800, 600, 8,16},
+ { 1024, 768, 8,16},
+ { 1280,1024, 8,16},
+ { 1600,1200, 8,16},
+ { 1920,1440, 8,16},
+ { 2048,1536, 8,16},
+ {  720, 480, 8,16},
+ {  720, 576, 8,16},
+ { 1280, 960, 8,16},
+ {  800, 480, 8,16},
+ { 1024, 576, 8,16},
+ { 1280, 720, 8,16},
+ {  856, 480, 8,16},
+ { 1280, 768, 8,16},
+ { 1400,1050, 8,16},
+ { 1152, 864, 8,16}
+};
+
+UCHAR XGI330_OutputSelect =0x40;
+UCHAR XGI330_SoftSetting = 0x30;
+UCHAR XGI330_SR07=0x18;
+UCHAR XGI330New_SR15[8][8]={
+{0x0,0x4,0x60,0x60},
+{0xf,0xf,0xf,0xf},
+{0xba,0xba,0xba,0xba},
+{0xa9,0xa9,0xac,0xac},
+{0xa0,0xa0,0xa0,0xa8},
+{0x0,0x0,0x2,0x2},
+{0x30,0x30,0x40,0x40},
+{0x0,0xa5,0xfb,0xf6}
+};
+
+UCHAR XGI330New_CR40[5][8]={
+{0x77,0x77,0x44,0x44},
+{0x77,0x77,0x44,0x44},
+{0x0,0x0,0x0,0x0},
+{0x5b,0x5b,0xab,0xab},
+{0x0,0x0,0xf0,0xf8}
+};
+
+UCHAR XGI330_CR49[]={0xaa,0x88};
+UCHAR XGI330_SR1F=0x0;
+UCHAR XGI330_SR21=0xa3;
+UCHAR XGI330_650_SR21=0xa7;
+UCHAR XGI330_SR22=0xfb;
+UCHAR XGI330_SR23=0xf6;
+UCHAR XGI330_SR24=0xd;
+
+UCHAR XGI660_SR21=0xa3;/* 2003.0312 */
+UCHAR XGI660_SR22=0xf3;/* 2003.0312 */
+
+UCHAR XGI330_LVDS_SR32=0x00;   /* ynlai for 650 LVDS */
+UCHAR XGI330_LVDS_SR33=0x00;	/* chiawen for 650 LVDS */
+UCHAR XGI330_650_SR31=0x40;
+UCHAR XGI330_650_SR33=0x04;
+UCHAR XGI330_CRT2Data_1_2 = 0x0;
+UCHAR XGI330_CRT2Data_4_D = 0x0;
+UCHAR XGI330_CRT2Data_4_E = 0x0;
+UCHAR XGI330_CRT2Data_4_10 = 0x80;
+USHORT XGI330_RGBSenseData = 0xd1;
+USHORT XGI330_VideoSenseData = 0xb9;
+USHORT XGI330_YCSenseData = 0xb3;
+USHORT XGI330_RGBSenseData2 = 0x0190;     /*301b*/
+USHORT XGI330_VideoSenseData2 = 0x0110;
+USHORT XGI330_YCSenseData2 = 0x016B;
+UCHAR XGI330_NTSCPhase[] = {0x21,0xed,0x8a,0x8};
+UCHAR XGI330_PALPhase[] = {0x2a,0x5,0xd3,0x0};
+UCHAR XGI330_NTSCPhase2[] = {0x21,0xF0,0x7B,0xD6};/*301b*/
+UCHAR XGI330_PALPhase2[] = {0x2a,0x09,0x86,0xe9};
+UCHAR XGI330_PALMPhase[] = {0x21,0xE4,0x2E,0x9B};   /*palmn*/
+UCHAR XGI330_PALNPhase[] = {0x21,0xF4,0x3E,0xBA};
+UCHAR XG40_I2CDefinition = 0x00 ;
+UCHAR XG20_CR97 = 0x10 ;
+
+UCHAR XG21_DVOSetting = 0x00 ;
+UCHAR XG21_CR2E = 0x00 ;
+UCHAR XG21_CR2F = 0x00 ;
+UCHAR XG21_CR46 = 0x00 ;
+UCHAR XG21_CR47 = 0x00 ;
+
+UCHAR XG27_CR97 = 0xC1 ;
+UCHAR XG27_SR36 = 0x30 ;
+UCHAR XG27_CR8F = 0x0C ;
+UCHAR XG27_CRD0[] = {0,0,0,0,0,0,0,0x82,0x00,0x66,0x01,0x00} ;
+UCHAR XG27_CRDE[] = {0,0} ;
+UCHAR XG27_SR40 = 0x04 ;
+UCHAR XG27_SR41 = 0x00 ;
+
+UCHAR XGI330_CHTVVCLKUNTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKONTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKUPAL[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKOPAL[]={0x00 };
+
+UCHAR XGI7007_CHTVVCLKUNTSC[]={CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK28_1,
+                               CH7007TVVCLK47_8
+                              };
+
+UCHAR XGI7007_CHTVVCLKONTSC[]={CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK24_6,
+                               CH7007TVVCLK43_6
+                              };
+
+UCHAR XGI7007_CHTVVCLKUPAL[]={CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK26_2,
+                              CH7007TVVCLK39
+                             };
+
+UCHAR XGI7007_CHTVVCLKOPAL[]={CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK26_2,
+                              CH7007TVVCLK36
+                             };
+
+XGI330_VCLKDataStruct XGI_CH7007VCLKData[]=
+{
+ { 0x60,0x36,30},  /* 0 30.2 MHZ */
+ { 0x40,0x4A,28},  /* 1 28.19 MHZ */
+ { 0x9F,0x46,44},  /* 2 43.6 MHZ */
+ { 0x97,0x2C,26},  /* 3 26.4 MHZ */
+ { 0x44,0xE4,25},  /* 4 24.6 MHZ */
+ { 0x7E,0x32,47},  /* 5 47.832 MHZ */
+ { 0x8A,0x24,31},  /* 6 31.5 MHZ */
+ { 0x97,0x2C,26},  /* 7 26.2 MHZ */
+ { 0xCE,0x3C,39},  /* 8 39 MHZ   */
+ { 0x52,0x4A,36},  /* 9 36 MHZ   */
+ { 0xFF,0x00,0 }   /* End mark      */
+};
+
+XGI330_VCLKDataStruct XGI_VCLKData[]=
+{
+               	/* SR2B,SR2C,SR2D */
+ 		{      0x1B,0xE1,25               },/* 00 (25.175MHz) */
+
+		{      0x4E,0xE4,28               },/* 01 (28.322MHz) */
+
+                {      0x57,0xE4,31               },/* 02 (31.500MHz) */
+
+                {      0xC3,0xC8,36               },/* 03 (36.000MHz) */
+
+                {      0x42,0xE2,40               },/* 04 (40.000MHz) */
+
+                {      0xFE,0xCD,43               },/* 05 (43.163MHz) */
+
+                {      0x5D,0xC4,44               },/* 06 (44.900MHz) */
+
+                {      0x52,0xE2,49               },/* 07 (49.500MHz) */
+
+                {      0x53,0xE2,50               },/* 08 (50.000MHz) */
+
+                {      0x74,0x67,52               },/* 09 (52.406MHz) */
+
+                {      0x6D,0x66,56               },/* 0A (56.250MHz) */
+
+                {      0x6C,0xC3,65               },/* 0B (65.000MHz) */
+
+                {      0x46,0x44,67               },/* 0C (67.765MHz) */
+
+                {      0xB1,0x46,68               },/* 0D (68.179MHz) */
+
+                {      0xD3,0x4A,72               },/* 0E (72.852MHz) */
+
+                {      0x29,0x61,75              },/* 0F (75.000MHz) */
+
+                {      0x6E,0x46,76               },/* 10 (75.800MHz) */
+
+                {      0x2B,0x61,78               },/* 11 (78.750MHz) */
+
+                {      0x31,0x42,79               },/* 12 (79.411MHz) */
+
+                {      0xAB,0x44,83               },/* 13 (83.950MHz) */
+
+                {      0x46,0x25,84               },/* 14 (84.800MHz) */
+
+                {      0x78,0x29,86               },/* 15 (86.600MHz) */
+
+                {      0x62,0x44,94               },/* 16 (94.500MHz) */
+
+                {      0x2B,0x41,104               },/* 17 (104.998MHz) */
+
+                {      0x3A,0x23,105               },/* 18 (105.882MHz) */
+
+                {      0x70,0x44,108               },/* 19 (107.862MHz) */
+
+                {      0x3C,0x23,109               },/* 1A (109.175MHz) */
+
+                {      0x5E,0x43,113              },/* 1B (113.309MHz) */
+
+                {      0xBC,0x44,116              },/* 1C (116.406MHz) */
+
+                {      0xE0,0x46,132              },/* 1D (132.258MHz) */
+
+                {      0x54,0x42,135               },/* 1E (135.500MHz) */
+
+                {      0x9C,0x22,139               },/* 1F (139.275MHz) */
+
+                {      0x41,0x22,157               },/* 20 (157.500MHz) */
+
+                {      0x70,0x24,162               },/* 21 (161.793MHz) */
+
+                {      0x30,0x21,175               },/* 22 (175.000MHz) */
+
+                {      0x4E,0x22,189              },/* 23 (188.520MHz) */
+
+                {      0xDE,0x26,194              },/* 24 (194.400MHz) */
+
+                {      0x62,0x06,202               },/* 25 (202.500MHz) */
+
+                {      0x3F,0x03,229               },/* 26 (229.500MHz) */
+
+                {      0xB8,0x06,234               },/* 27 (233.178MHz) */
+
+                {      0x34,0x02,253               },/* 28 (252.699MHz) */
+
+                {      0x58,0x04,255               },/* 29 (254.817MHz) */
+
+                {      0x24,0x01,265              },/* 2A (265.728MHz) */
+
+                {      0x9B,0x02,267               },/* 2B (266.952MHz) */
+
+                {      0x70,0x05,270               },/* 2C (269.65567MHz) */
+
+                {      0x25,0x01,272               },/* 2D (272.04199MHz) */
+
+                {      0x9C,0x02,277               },/* 2E (277.015MHz) */
+
+                {      0x27,0x01,286               },/* 2F (286.359985MHz) */
+
+                {      0xB3,0x04,291               },/* 30 (291.13266MHz) */
+
+                {      0xBC,0x05,292               },/* 31 (291.766MHz) */
+
+                {      0xF6,0x0A,310               },/* 32 (309.789459MHz) */
+
+                {      0x95,0x01,315               },/* 33 (315.195MHz) */
+
+                {      0xF0,0x09,324               },/* 34 (323.586792MHz) */
+
+                {      0xFE,0x0A,331               },/* 35 (330.615631MHz) */
+
+                {      0xF3,0x09,332              },/* 36 (332.177612MHz) */
+
+                {      0x5E,0x03,340              },/* 37 (340.477MHz) */
+
+                {      0xE8,0x07,376              },/* 38 (375.847504MHz) */
+
+                {      0xDE, 0x06,389             },/* 39 (388.631439MHz) */
+
+                {      0x52,0x2A,54               },/* 3A (54.000MHz) */
+
+                {      0x52,0x6A,27              },/* 3B (27.000MHz) */
+
+                {      0x62,0x24,70               },/* 3C (70.874991MHz) */
+
+                {      0x62,0x64,70               },/* 3D (70.1048912MHz) */
+
+                {      0xA8,0x4C,30               },/* 3E (30.1048912MHz) */
+
+                {      0x20,0x26,33               },/* 3F (33.7499957MHz) */
+
+                {      0x31,0xc2,39               },/* 40 (39.77MHz) */
+
+                {      0x11,0x21,30               },/* 41 (30MHz) }// NTSC 1024X768 */
+
+                {      0x2E,0x48,25               },/* 42 (25.175MHz) }// ScaleLCD */
+
+                {      0x24,0x46,25               },/* 43 (25.175MHz) */
+
+                {      0x26,0x64,28               },/* 44 (28.322MHz) */
+
+                {      0x37,0x64,40               },/* 45 (40.000MHz) */
+
+                {      0xA1,0x42,108               },/* 46 (95.000MHz) }// QVGA */
+
+                {      0x37,0x61,100               },/* 47 (100.00MHz) */
+
+                {      0x78,0x27,108               },/* 48 (108.200MHz) */
+
+                {      0xBF,0xC8,35               },/* 49 (35.2MHz) */
+
+                {      0x66,0x43,123               },/* 4A (122.61Mhz) */
+
+                {      0x2C,0x61,80               },/* 4B (80.350Mhz) */
+
+                {      0x3B,0x61,108               },/* 4C (107.385Mhz) */
+
+
+/*                {      0x60,0x36,30               },// 4D (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4E (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4F (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 50 (30.200MHz)   }// CHTV
+
+                {      0x40,0x4A,28               },// 51 (28.190MHz)
+
+                {      0x9F,0x46,44               },// 52 (43.600MHz)
+
+                {      0x97,0x2C,26               },// 53 (26.400MHz)
+
+                {      0x44,0xE4,25               },// 54 (24.600MHz)
+
+                {      0x7E,0x32,47               },// 55 (47.832MHz)
+
+                {      0x8A,0x24,31               },// 56 (31.500MHz)
+
+                {      0x97,0x2C,26               },// 57 (26.200MHz)
+
+                {      0xCE,0x3C,39               },// 58 (39.000MHz)
+
+                {      0x52,0x4A,36               },// 59 (36.000MHz)
+
+*/
+		{      0x69,0x61,191		  }, /* 4D (190.96MHz ) */
+		{      0x4F,0x22,192		  }, /* 4E (192.069MHz) */
+		{      0x28,0x26,322		  }, /* 4F (322.273MHz) */
+		{      0x5C,0x6B,27		  }, /* 50 (27.74HMz) */
+		{      0x57,0x24,126		  }, /* 51 (125.999MHz) */
+		{      0x5C,0x42,148		  }, /* 52 (148.5MHz) */
+		{      0x42,0x61,120		  }, /* 53 (120.839MHz) */
+		{      0x62,0x61,178		  }, /* 54 (178.992MHz) */
+		{      0x59,0x22,217		  }, /* 55 (217.325MHz) */
+		{      0x29,0x01,300		  }, /* 56 (299.505Mhz) */
+		{      0x52,0x63,74		  }, /* 57 (74.25MHz) */
+
+
+                {      0xFF,0x00,0                }/* End mark */
+ }  ;
+
+XGI330_VCLKDataStruct XGI_VBVCLKData[]=
+{
+                {      0x1B,0xE1,25               },/* 00 (25.175MHz) */
+
+                {      0x4E,0xE4,28               },/* 01 (28.322MHz) */
+
+                {      0x57,0xE4,31               },/* 02 (31.500MHz) */
+
+                {      0xC3,0xC8,36               },/* 03 (36.000MHz) */
+
+                {      0x42,0x47,40               },/* 04 (40.000MHz) */
+
+                {      0xFE,0xCD,43               },/* 05 (43.163MHz) */
+
+                {      0x5D,0xC4,44               },/* 06 (44.900MHz) */
+
+                {      0x52,0x47,49               },/* 07 (49.500MHz) */
+
+                {      0x53,0x47,50               },/* 08 (50.000MHz) */
+
+                {      0x74,0x67,52               },/* 09 (52.406MHz) */
+
+                {      0x6D,0x66,56               },/* 0A (56.250MHz) */
+
+                {      0x35,0x62,65               },/* 0B (65.000MHz) */
+
+                {      0x46,0x44,67               },/* 0C (67.765MHz) */
+
+                {      0xB1,0x46,68               },/* 0D (68.179MHz) */
+
+                {      0xD3,0x4A,72               },/* 0E (72.852MHz) */
+
+                {      0x29,0x61,75               },/* 0F (75.000MHz) */
+
+                {      0x6D,0x46,75               },/* 10 (75.800MHz) */
+
+                {      0x41,0x43,78               },/* 11 (78.750MHz) */
+
+                {      0x31,0x42,79               },/* 12 (79.411MHz) */
+
+                {      0xAB,0x44,83               },/* 13 (83.950MHz) */
+
+                {      0x46,0x25,84               },/* 14 (84.800MHz) */
+
+                {      0x78,0x29,86               },/* 15 (86.600MHz) */
+
+                {      0x62,0x44,94               },/* 16 (94.500MHz) */
+
+                {      0x2B,0x22,104               },/* 17 (104.998MHz) */
+
+                {      0x49,0x24,105               },/* 18 (105.882MHz) */
+
+                {      0xF8,0x2F,108               },/* 19 (108.279MHz) */
+
+                {      0x3C,0x23,109               },/* 1A (109.175MHz) */
+
+                {      0x5E,0x43,113               },/* 1B (113.309MHz) */
+
+                {      0xBC,0x44,116               },/* 1C (116.406MHz) */
+
+                {      0xE0,0x46,132               },/* 1D (132.258MHz) */
+
+                {      0xD4,0x28,135               },/* 1E (135.220MHz) */
+
+                {      0xEA,0x2A,139               },/* 1F (139.275MHz) */
+
+                {      0x41,0x22,157               },/* 20 (157.500MHz) */
+
+                {      0x70,0x24,162               },/* 21 (161.793MHz) */
+
+                {      0x30,0x21,175               },/* 22 (175.000MHz) */
+
+                {      0x4E,0x22,189               },/* 23 (188.520MHz) */
+
+                {      0xDE,0x26,194               },/* 24 (194.400MHz) */
+
+                {      0x70,0x07,202               },/* 25 (202.500MHz) */
+
+                {      0x3F,0x03,229               },/* 26 (229.500MHz) */
+
+                {      0xB8,0x06,234               },/* 27 (233.178MHz) */
+
+                {      0x34,0x02,253               },/* 28 (252.699997 MHz) */
+
+                {      0x58,0x04,255               },/* 29 (254.817MHz) */
+
+                {      0x24,0x01,265               },/* 2A (265.728MHz) */
+
+                {      0x9B,0x02,267               },/* 2B (266.952MHz) */
+
+                {      0x70,0x05,270               },/* 2C (269.65567 MHz) */
+
+                {      0x25,0x01,272               },/* 2D (272.041992 MHz) */
+
+                {      0x9C,0x02,277               },/* 2E (277.015MHz) */
+
+                {      0x27,0x01,286               },/* 2F (286.359985 MHz) */
+
+                {      0x3C,0x02,291               },/* 30 (291.132660 MHz) */
+
+                {      0xEF,0x0A,292               },/* 31 (291.766MHz) */
+
+                {      0xF6,0x0A,310               },/* 32 (309.789459 MHz) */
+
+                {      0x95,0x01,315               },/* 33 (315.195MHz) */
+
+                {      0xF0,0x09,324               },/* 34 (323.586792 MHz) */
+
+                {      0xFE,0x0A,331               },/* 35 (330.615631 MHz) */
+
+                {      0xF3,0x09,332               },/* 36 (332.177612 MHz) */
+
+                {      0xEA,0x08,340               },/* 37 (340.477MHz) */
+
+                {      0xE8,0x07,376               },/* 38 (375.847504 MHz) */
+
+                {      0xDE,0x06,389               },/* 39 (388.631439 MHz) */
+
+                {      0x52,0x2A,54                },/* 3A (54.000MHz) */
+
+                {      0x52,0x6A,27                },/* 3B (27.000MHz) */
+
+
+                {      0x62,0x24,70                },/* 3C (70.874991MHz) */
+
+
+                {      0x62,0x64,70                },/* 3D (70.1048912MHz) */
+
+                {      0xA8,0x4C,30                },/* 3E (30.1048912MHz) */
+
+                {      0x20,0x26,33                },/* 3F (33.7499957MHz) */
+
+                {      0x31,0xc2,39                },/* 40 (39.77MHz) */
+
+                {      0x11,0x21,30                },/* 41 (30MHz) }// NTSC 1024X768 */
+
+                {      0x2E,0x48,25                },/* 42 (25.175MHz) }// ScaleLCD */
+
+                {      0x24,0x46,25                },/* 43 (25.175MHz) */
+
+                {      0x26,0x64,28                },/* 44 (28.322MHz) */
+
+                {      0x37,0x64,40                },/* 45 (40.000MHz) */
+
+                {      0xA1,0x42,108               },/* 46 (95.000MHz) }// QVGA */
+
+                {      0x37,0x61,100               },/* 47 (100.00MHz) */
+
+                {      0x78,0x27,108               },/* 48 (108.200MHz) */
+
+                {      0xBF,0xC8,35                },/* 49 (35.2MHz) */
+
+                {      0x66,0x43,123               },/* 4A (122.61Mhz) */
+
+                {      0x2C,0x61,80                },/* 4B (80.350Mhz) */
+
+                {      0x3B,0x61,108               },/* 4C (107.385Mhz) */
+
+/*
+                {      0x60,0x36,30               },// 4D (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4E (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4F (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 50 (30.200MHz)   }// CHTV
+
+                {      0x40,0x4A,28               },// 51 (28.190MHz)
+
+                {      0x9F,0x46,44               },// 52 (43.600MHz)
+
+                {      0x97,0x2C,26               },// 53 (26.400MHz)
+
+                {      0x44,0xE4,25               },// 54 (24.600MHz)
+
+                {      0x7E,0x32,47               },// 55 (47.832MHz)
+
+                {      0x8A,0x24,31               },// 56 (31.500MHz)
+
+                {      0x97,0x2C,26               },// 57 (26.200MHz)
+
+                {      0xCE,0x3C,39               },// 58 (39.000MHz)
+
+                {      0x52,0x4A,36               },// 59 (36.000MHz)
+*/
+		{      0x69,0x61,191		  }, /* 4D (190.96MHz ) */
+		{      0x4F,0x22,192		  }, /* 4E (192.069MHz) */
+		{      0x28,0x26,322		  }, /* 4F (322.273MHz) */
+		{      0x5C,0x6B,27		  }, /* 50 (27.74HMz) */
+		{      0x57,0x24,126		  }, /* 51 (125.999MHz) */
+		{      0x5C,0x42,148		  }, /* 52 (148.5MHz) */
+		{      0x42,0x61,120		  }, /* 53 (120.839MHz) */
+		{      0x62,0x61,178		  }, /* 54 (178.992MHz) */
+		{      0x59,0x22,217		  }, /* 55 (217.325MHz) */
+		{      0x29,0x01,300		  }, /* 56 (299.505Mhz) */
+		{      0x52,0x63,74		  }, /* 57 (74.25MHz) */
+
+
+                {      0xFF,0x00,0                }      /* End mark */
+};
+
+UCHAR XGI660_TVDelayList[]=
+{
+          0x44,            /* ; 0 ExtNTSCDelay */
+          0x44,            /* ; 1 StNTSCDelay */
+          0x44,            /* ; 2 ExtPALDelay */
+          0x44,            /* ; 3 StPALDelay */
+          0x44,            /* ; 4 ExtHiTVDelay(1080i) */
+          0x44,            /* ; 5 StHiTVDelay(1080i) */
+          0x44,            /* ; 6 ExtYPbPrDelay(525i) */
+          0x44,            /* ; 7 StYPbPrDealy(525i) */
+          0x44,            /* ; 8 ExtYPbPrDelay(525p) */
+          0x44,            /* ; 9 StYPbPrDealy(525p) */
+          0x44,            /* ; A ExtYPbPrDelay(750p) */
+          0x44             /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI660_TVDelayList2[]=
+{
+          0x44,           /* ; 0 ExtNTSCDelay */
+          0x44,           /* ; 1 StNTSCDelay */
+          0x44,           /* ; 2 ExtPALDelay */
+          0x44,           /* ; 3 StPALDelay */
+          0x44,           /* ; 4 ExtHiTVDelay */
+          0x44,           /* ; 5 StHiTVDelay */
+          0x44,           /* ; 6 ExtYPbPrDelay(525i) */
+          0x44,           /* ; 7 StYPbPrDealy(525i) */
+          0x44,           /* ; 8 ExtYPbPrDelay(525p) */
+          0x44,           /* ; 9 StYPbPrDealy(525p) */
+          0x44,           /* ; A ExtYPbPrDelay(750p) */
+          0x44            /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList[]=
+{
+	0x22,            /* ; 0 ExtNTSCDelay */
+	0x22,            /* ; 1 StNTSCDelay */
+	0x22,            /* ; 2 ExtPALDelay */
+	0x22,            /* ; 3 StPALDelay */
+	0x88,            /* ; 4 ExtHiTVDelay(1080i) */
+	0xBB,            /* ; 5 StHiTVDelay(1080i) */
+	0x22,            /* ; 6 ExtYPbPrDelay(525i) */
+	0x22,            /* ; 7 StYPbPrDealy(525i) */
+	0x22,            /* ; 8 ExtYPbPrDelay(525p) */
+	0x22,            /* ; 9 StYPbPrDealy(525p) */
+	0x22,            /* ; A ExtYPbPrDelay(750p) */
+	0x22            /* B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList2[]=
+{
+	0x22,           /* ; 0 ExtNTSCDelay */
+	0x22,           /* ; 1 StNTSCDelay */
+	0x22,           /* ; 2 ExtPALDelay */
+	0x22,           /* ; 3 StPALDelay */
+	0x22,           /* ; 4 ExtHiTVDelay */
+	0x22,           /* ; 5 StHiTVDelay */
+	0x22,           /* ; 6 ExtYPbPrDelay(525i) */
+	0x22,           /* ; 7 StYPbPrDealy(525i) */
+	0x22,           /* ; 8 ExtYPbPrDelay(525p) */
+	0x22,           /* ; 9 StYPbPrDealy(525p) */
+	0x22,           /* ; A ExtYPbPrDelay(750p) */
+	0x22            /* ; B StYPbPrDealy(750p) */
+};
+
+
+UCHAR TVAntiFlickList[]=
+{/* NTSCAntiFlicker */
+                      0x04,           /* ; 0 Adaptive */
+                      0x00,           /* ; 1 new anti-flicker ? */
+/* PALAntiFlicker */
+                      0x04,           /* ; 0 Adaptive */
+                      0x08,           /* ; 1 new anti-flicker ? */
+/* HiTVAntiFlicker */
+                      0x04,           /* ; 0 ? */
+                      0x00            /* ; 1 new anti-flicker ? */
+};
+
+
+UCHAR TVEdgeList[]=
+{
+      0x00,            /* ; 0 NTSC No Edge enhance */
+      0x04,            /* ; 1 NTSC Adaptive Edge enhance */
+      0x00,            /* ; 0 PAL No Edge enhance */
+      0x04,            /* ; 1 PAL Adaptive Edge enhance */
+      0x00,            /* ; 0 HiTV */
+      0x00             /* ; 1 HiTV */
+};
+
+ULONG TVPhaseList[]=
+{      0x08BAED21, /* ; 0 NTSC phase */
+       0x00E3052A, /* ; 1 PAL phase */
+       0x9B2EE421, /* ; 2 PAL-M phase */
+       0xBA3EF421, /* ; 3 PAL-N phase */
+       0xA7A28B1E, /* ; 4 NTSC 1024x768 */
+       0xE00A831E, /* ; 5 PAL-M 1024x768 */
+       0x00000000, /* ; 6 reserved */
+       0x00000000, /* ; 7 reserved */
+       0xD67BF021, /* ; 8 NTSC phase */
+       0xE986092A, /* ; 9 PAL phase */
+       0xA4EFE621, /* ; A PAL-M phase */
+       0x4694F621, /* ; B PAL-N phase */
+       0x8BDE711C, /* ; C NTSC 1024x768 */
+       0xE00A831E  /* ; D PAL-M 1024x768 */
+};
+
+UCHAR NTSCYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38     ,/* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
+                      0xEB,0x04,0x25,0x18     ,/* 2 : 640x text mode */
+                      0xF1,0x04,0x1F,0x18     ,/* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18     ,/* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6     /* 6 : 800x gra. mode */
+};
+
+UCHAR PALYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
+                      0xF1,0xF7,0x1F,0x32     ,/* 2 : 640x text mode */
+                      0xF3,0x00,0x1D,0x20     ,/* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 4 : 320x gra. mode */
+                      0xF1,0xF7,0x1F,0x32     ,/* 5 : 640x gra. mode */
+                      0xFC,0xFB,0x14,0x2A     /* 6 : 800x gra. mode */
+};
+
+UCHAR PALMYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+                      0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+                      0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFF,0xFF  /* End of Table */
+};
+
+UCHAR PALNYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+                      0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+                      0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFF,0xFF  /* End of Table */
+};
+
+UCHAR NTSCYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALMYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALNYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR XGI_NTSC1024AdjTime[]=
+{
+      0xa7,0x07,0xf2,0x6e,0x17,0x8b,0x73,0x53,
+      0x13,0x40,0x34,0xF4,0x63,0xBB,0xCC,0x7A,
+      0x58,0xe4,0x73,0xd0,0x13
+};
+
+XGI301C_Tap4TimingStruct HiTVTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E  /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct EnlargeTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E   /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct NoScaleTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E  /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct PALTap4Timing[]=
+{
+	{600,  {
+                0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+                0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+                0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+                0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+                0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+                0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+                0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+                0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04  /* ; F8-FF */
+                }
+ 	},
+        {768,	{
+                0x08,0x12,0x08,0x7E,0x07,0x12,0x09,0x7E, /* ; C0-C7 */
+                0x06,0x12,0x0A,0x7E,0x05,0x11,0x0B,0x7F, /* ; C8-CF */
+                0x04,0x11,0x0C,0x7F,0x03,0x11,0x0C,0x00, /* ; D0-D7 */
+                0x03,0x10,0x0D,0x00,0x02,0x0F,0x0E,0x01, /* ; D8-DF */
+                0x01,0x0F,0x0F,0x01,0x01,0x0E,0x0F,0x02, /* ; E0-E7 */
+                0x00,0x0D,0x10,0x03,0x7F,0x0C,0x11,0x04, /* ; EA-EF */
+                0x7F,0x0C,0x11,0x04,0x7F,0x0B,0x11,0x05, /* ; F0-F7 */
+                0x7E,0x0A,0x12,0x06,0x7E,0x09,0x12,0x07  /* ; F8-FF */
+                }
+        },
+        {0xFFFF,
+        	{
+                0x04,0x1A,0x04,0x7E,0x02,0x1B,0x05,0x7E, /* ; C0-C7 */
+                0x01,0x1A,0x07,0x7E,0x00,0x1A,0x09,0x7D, /* ; C8-CF */
+                0x7F,0x19,0x0B,0x7D,0x7E,0x18,0x0D,0x7D, /* ; D0-D7 */
+                0x7D,0x17,0x10,0x7C,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+                0x7C,0x14,0x14,0x7C,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+                0x7C,0x10,0x17,0x7D,0x7C,0x0D,0x18,0x7F, /* ; EA-EF */
+                0x7D,0x0B,0x19,0x7F,0x7D,0x09,0x1A,0x00, /* ; F0-F7 */
+                0x7D,0x07,0x1A,0x02,0x7E,0x05,0x1B,0x02  /* ; F8-FF */
+                }
+        }
+};
+
+XGI301C_Tap4TimingStruct NTSCTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[]=
+{        {0xFFFF,
+               {
+               0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+               0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+               0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+               0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+               0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+               0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+               0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+               0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04 /* F8-FF */
+               }
+        }
+};
diff --git a/drivers/staging/xgifb/vb_util.c b/drivers/staging/xgifb/vb_util.c
new file mode 100644
index 00000000000..87531b49b73
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.c
@@ -0,0 +1,263 @@
+#include "osdef.h"
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+
+#ifdef LINUX_KERNEL
+#include "XGIfb.h"
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+
+
+
+void XGINew_SetReg1( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg2( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg3( ULONG , USHORT ) ;
+void XGINew_SetReg4( ULONG , ULONG ) ;
+UCHAR XGINew_GetReg1( ULONG , USHORT) ;
+UCHAR XGINew_GetReg2( ULONG ) ;
+ULONG XGINew_GetReg3( ULONG ) ;
+void XGINew_ClearDAC( PUCHAR ) ;
+void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg1 */
+/* Input : */
+/* Output : */
+/* Description : SR CRTC GR */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
+{
+#ifdef LINUX_XF86
+    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+    OutPortByte( ( PUCHAR )(ULONG)port + 1 , data ) ;
+#else
+    OutPortByte( port , index ) ;
+    OutPortByte( port + 1 , data ) ;
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg2 */
+/* Input : */
+/* Output : */
+/* Description : AR( 3C0 ) */
+/* --------------------------------------------------------------------- */
+/*void XGINew_SetReg2( ULONG port , USHORT index , USHORT data )
+{
+    InPortByte( ( PUCHAR )port + 0x3da - 0x3c0 ) ;
+    OutPortByte( XGINew_P3c0 , index ) ;
+    OutPortByte( XGINew_P3c0 , data ) ;
+    OutPortByte( XGINew_P3c0 , 0x20 ) ;
+}*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg3( ULONG port , USHORT data )
+{
+    OutPortByte( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg4( ULONG port , ULONG data )
+{
+    OutPortLong( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg1( ULONG port , USHORT index )
+{
+    UCHAR data ;
+
+#ifdef LINUX_XF86
+    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+    data = InPortByte( ( PUCHAR )(ULONG)port + 1 ) ;
+#else
+    OutPortByte( port , index ) ;
+    data = InPortByte( port + 1 ) ;
+#endif
+
+    return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg2( ULONG port )
+{
+    UCHAR data ;
+
+    data = InPortByte( port ) ;
+
+    return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+ULONG XGINew_GetReg3( ULONG port )
+{
+    ULONG data ;
+
+    data = InPortLong( port ) ;
+
+    return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegANDOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegANDOR( ULONG Port , USHORT Index , USHORT DataAND , USHORT DataOR )
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;		/* XGINew_Part1Port index 02 */
+    temp = ( temp & ( DataAND ) ) | DataOR ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegAND */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND)
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
+    temp &= DataAND ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegOR( ULONG Port , USHORT Index , USHORT DataOR )
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
+    temp |= DataOR ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : NewDelaySecond */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void NewDelaySeconds( int seconds )
+{
+#ifdef WIN2000
+    int j ;
+#endif
+    int i ;
+
+
+    for( i = 0 ; i < seconds ; i++ )
+    {
+#ifdef TC
+        delay( 1000 ) ;
+#endif
+
+#ifdef WIN2000
+
+        for ( j = 0 ; j < 20000 ; j++ )
+            VideoPortStallExecution( 50 ) ;
+#endif
+
+#ifdef WINCE_HEADER
+#endif
+
+#ifdef LINUX_KERNEL
+#endif
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : Newdebugcode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void Newdebugcode( UCHAR code )
+{
+//    OutPortByte ( 0x80 , code ) ;
+    /* OutPortByte ( 0x300 , code ) ; */
+    /* NewDelaySeconds( 0x3 ) ; */
+}
+
+
+
diff --git a/drivers/staging/xgifb/vb_util.h b/drivers/staging/xgifb/vb_util.h
new file mode 100644
index 00000000000..91779d8cfdc
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.h
@@ -0,0 +1,15 @@
+#ifndef _VBUTIL_
+#define _VBUTIL_
+extern   void     NewDelaySeconds( int );
+extern   void     Newdebugcode( UCHAR );
+extern   void     XGINew_SetReg1(ULONG, USHORT, USHORT);
+extern   void     XGINew_SetReg3(ULONG, USHORT);
+extern   UCHAR    XGINew_GetReg1(ULONG, USHORT);
+extern   UCHAR    XGINew_GetReg2(ULONG);
+extern   void     XGINew_SetReg4(ULONG, ULONG);
+extern   ULONG    XGINew_GetReg3(ULONG);
+extern   void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+extern   void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+extern   void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+#endif
+
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
new file mode 100644
index 00000000000..295ea860ae4
--- /dev/null
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -0,0 +1,325 @@
+
+#ifndef _VGATYPES_
+#define _VGATYPES_
+
+#include "osdef.h"
+
+#ifdef LINUX_XF86
+#include "xf86Version.h"
+#include "xf86Pci.h"
+#endif
+
+#ifdef LINUX_KERNEL  /* We don't want the X driver to depend on kernel source */
+#include <linux/ioctl.h>
+#endif
+
+#ifndef FALSE
+#define FALSE   0
+#endif
+
+#ifndef TRUE
+#define TRUE    1
+#endif
+
+#ifndef NULL
+#define NULL    0
+#endif
+
+#ifndef CHAR
+typedef char CHAR;
+#endif
+
+#ifndef SHORT
+typedef short SHORT;
+#endif
+
+#ifndef LONG
+typedef long  LONG;
+#endif
+
+#ifndef UCHAR
+typedef unsigned char UCHAR;
+#endif
+
+#ifndef USHORT
+typedef unsigned short USHORT;
+#endif
+
+#ifndef ULONG
+typedef unsigned long ULONG;
+#endif
+
+#ifndef PUCHAR
+typedef UCHAR *PUCHAR;
+#endif
+
+#ifndef PUSHORT
+typedef USHORT *PUSHORT;
+#endif
+
+#ifndef PLONGU
+typedef ULONG *PULONG;
+#endif
+
+#ifndef VOID
+typedef void VOID;
+#endif
+
+#ifndef PVOID
+typedef void *PVOID;
+#endif
+
+#ifndef BOOLEAN
+typedef UCHAR BOOLEAN;
+#endif
+/*
+#ifndef bool
+typedef UCHAR bool;
+#endif
+*/
+#ifdef LINUX_KERNEL
+typedef unsigned long XGIIOADDRESS;
+#endif
+
+#ifdef LINUX_XF86
+#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
+typedef unsigned char IOADDRESS;
+typedef unsigned char XGIIOADDRESS;
+#else
+typedef IOADDRESS XGIIOADDRESS;
+#endif
+#endif
+
+#ifndef VBIOS_VER_MAX_LENGTH
+#define VBIOS_VER_MAX_LENGTH    4
+#endif
+
+#ifndef WIN2000
+
+#ifndef LINUX_KERNEL   /* For the linux kernel, this is defined in xgifb.h */
+#ifndef XGI_CHIP_TYPE
+typedef enum _XGI_CHIP_TYPE {
+    XGI_VGALegacy = 0,
+#ifdef LINUX_XF86
+    XGI_530,
+    XGI_OLD,
+#endif
+    XGI_300,
+    XGI_630,
+    XGI_640,
+    XGI_315H,
+    XGI_315,
+    XGI_315PRO,
+    XGI_550,
+    XGI_650,
+    XGI_650M,
+    XGI_740,
+    XGI_330,
+    XGI_661,
+    XGI_660,
+    XGI_760,
+    XG40 = 32,
+    XG41,
+    XG42,
+    XG45,
+    XG20 = 48,
+    XG21,
+    XG27,
+    MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+#endif
+#endif
+
+#ifndef XGI_VB_CHIP_TYPE
+typedef enum _XGI_VB_CHIP_TYPE {
+    VB_CHIP_Legacy = 0,
+    VB_CHIP_301,
+    VB_CHIP_301B,
+    VB_CHIP_301LV,
+    VB_CHIP_302,
+    VB_CHIP_302B,
+    VB_CHIP_302LV,
+    VB_CHIP_301C,
+    VB_CHIP_302ELV,
+    VB_CHIP_UNKNOWN, /* other video bridge or no video bridge */
+    MAX_VB_CHIP
+} XGI_VB_CHIP_TYPE;
+#endif
+
+#ifndef XGI_LCD_TYPE
+typedef enum _XGI_LCD_TYPE {
+    LCD_INVALID = 0,
+    LCD_320x480,       /* FSTN, DSTN */
+    LCD_640x480,
+    LCD_640x480_2,     /* FSTN, DSTN */
+    LCD_640x480_3,     /* FSTN, DSTN */
+    LCD_800x600,
+    LCD_848x480,
+    LCD_1024x600,
+    LCD_1024x768,
+    LCD_1152x768,
+    LCD_1152x864,
+    LCD_1280x720,
+    LCD_1280x768,
+    LCD_1280x800,
+    LCD_1280x960,
+    LCD_1280x1024,
+    LCD_1400x1050,
+    LCD_1600x1200,
+    LCD_1680x1050,
+    LCD_1920x1440,
+    LCD_2048x1536,
+    LCD_CUSTOM,
+    LCD_UNKNOWN
+} XGI_LCD_TYPE;
+#endif
+
+#endif   /* not WIN2000 */
+
+#ifndef PXGI_DSReg
+typedef struct _XGI_DSReg
+{
+  UCHAR  jIdx;
+  UCHAR  jVal;
+} XGI_DSReg, *PXGI_DSReg;
+#endif
+
+#ifndef XGI_HW_DEVICE_INFO
+
+typedef struct _XGI_HW_DEVICE_INFO  XGI_HW_DEVICE_INFO, *PXGI_HW_DEVICE_INFO;
+
+typedef BOOLEAN (*PXGI_QUERYSPACE)   (PXGI_HW_DEVICE_INFO, ULONG, ULONG, ULONG *);
+
+struct _XGI_HW_DEVICE_INFO
+{
+    ULONG  ulExternalChip;       /* NO VB or other video bridge*/
+                                 /* if ujVBChipID = VB_CHIP_UNKNOWN, */
+#ifdef LINUX_XF86
+    PCITAG PciTag;		 /* PCI Tag */
+#endif
+
+    PUCHAR  pjVirtualRomBase;    /* ROM image */
+
+    BOOLEAN UseROM;		 /* Use the ROM image if provided */
+
+    PVOID   pDevice;
+
+    PUCHAR  pjVideoMemoryAddress;/* base virtual memory address */
+                                 /* of Linear VGA memory */
+
+    ULONG  ulVideoMemorySize;    /* size, in bytes, of the memory on the board */
+
+    PUCHAR pjIOAddress;          /* base I/O address of VGA ports (0x3B0) */
+
+    PUCHAR pjCustomizedROMImage;
+
+    PUCHAR pj2ndVideoMemoryAddress;
+    ULONG  ul2ndVideoMemorySize;
+
+    PUCHAR pj2ndIOAddress;
+/*#ifndef WIN2000
+    XGIIOADDRESS pjIOAddress;   //  base I/O address of VGA ports (0x3B0)
+#endif */
+    UCHAR  jChipType;            /* Used to Identify Graphics Chip */
+                                 /* defined in the data structure type  */
+                                 /* "XGI_CHIP_TYPE" */
+
+    UCHAR  jChipRevision;        /* Used to Identify Graphics Chip Revision */
+
+    UCHAR  ujVBChipID;           /* the ID of video bridge */
+                                 /* defined in the data structure type */
+                                 /* "XGI_VB_CHIP_TYPE" */
+
+    BOOLEAN    bNewScratch;
+
+    ULONG  ulCRT2LCDType;        /* defined in the data structure type */
+
+    ULONG usExternalChip;       /* NO VB or other video bridge (other than  */
+                                 /*  video bridge) */
+
+    BOOLEAN bIntegratedMMEnabled;/* supporting integration MM enable */
+
+    BOOLEAN bSkipDramSizing;     /* True: Skip video memory sizing. */
+
+    BOOLEAN bSkipSense;
+
+    BOOLEAN bIsPowerSaving;     /* True: XGIInit() is invoked by power management,
+                                   otherwise by 2nd adapter's initialzation */
+
+    PXGI_DSReg  pSR;             /* restore SR registers in initial function. */
+                                 /* end data :(idx, val) =  (FF, FF). */
+                                 /* Note : restore SR registers if  */
+                                 /* bSkipDramSizing = TRUE */
+
+    PXGI_DSReg  pCR;             /* restore CR registers in initial function. */
+                                 /* end data :(idx, val) =  (FF, FF) */
+                                 /* Note : restore cR registers if  */
+                                 /* bSkipDramSizing = TRUE */
+/*
+#endif
+*/
+
+    PXGI_QUERYSPACE  pQueryVGAConfigSpace;
+
+    PXGI_QUERYSPACE  pQueryNorthBridgeSpace;
+
+    UCHAR  szVBIOSVer[VBIOS_VER_MAX_LENGTH];
+
+};
+#endif
+
+/* Addtional IOCTL for communication xgifb <> X driver        */
+/* If changing this, xgifb.h must also be changed (for xgifb) */
+
+#ifdef LINUX_XF86  /* We don't want the X driver to depend on the kernel source */
+
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define XGIFB_GET_INFO    0x80046ef8  /* Wow, what a terrible hack... */
+
+/* Structure argument for XGIFB_GET_INFO ioctl  */
+typedef struct _XGIFB_INFO xgifb_info, *pxgifb_info;
+
+struct _XGIFB_INFO {
+	CARD32 	xgifb_id;         	/* for identifying xgifb */
+#ifndef XGIFB_ID
+#define XGIFB_ID	  0x53495346    /* Identify myself with 'XGIF' */
+#endif
+ 	CARD32 	chip_id;		/* PCI ID of detected chip */
+	CARD32	memory;			/* video memory in KB which xgifb manages */
+	CARD32	heapstart;             	/* heap start (= xgifb "mem" argument) in KB */
+	CARD8 	fbvidmode;		/* current xgifb mode */
+
+	CARD8 	xgifb_version;
+	CARD8	xgifb_revision;
+	CARD8 	xgifb_patchlevel;
+
+	CARD8 	xgifb_caps;		/* xgifb's capabilities */
+
+	CARD32 	xgifb_tqlen;		/* turbo queue length (in KB) */
+
+	CARD32 	xgifb_pcibus;      	/* The card's PCI ID */
+	CARD32 	xgifb_pcislot;
+	CARD32 	xgifb_pcifunc;
+
+	CARD8 	xgifb_lcdpdc;
+
+	CARD8	xgifb_lcda;
+
+	CARD32	xgifb_vbflags;
+	CARD32	xgifb_currentvbflags;
+
+	CARD32 	xgifb_scalelcd;
+	CARD32 	xgifb_specialtiming;
+
+	CARD8 	xgifb_haveemi;
+	CARD8 	xgifb_emi30,xgifb_emi31,xgifb_emi32,xgifb_emi33;
+	CARD8 	xgifb_haveemilcd;
+
+	CARD8 	xgifb_lcdpdca;
+
+	CARD8 reserved[212]; 		/* for future use */
+};
+#endif
+
+#endif
+
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0c2f14ff969..162c95a088e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1201,7 +1201,7 @@ made_compressed_probe:
 		if (rcv->urb == NULL) {
 			dev_dbg(&intf->dev,
 				"out of memory (read urbs usb_alloc_urb)\n");
-			goto alloc_fail7;
+			goto alloc_fail6;
 		}
 
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1225,7 +1225,7 @@ made_compressed_probe:
 		if (snd->urb == NULL) {
 			dev_dbg(&intf->dev,
 				"out of memory (write urbs usb_alloc_urb)");
-			goto alloc_fail7;
+			goto alloc_fail8;
 		}
 
 		if (usb_endpoint_xfer_int(epwrite))
@@ -1264,6 +1264,7 @@ made_compressed_probe:
 		i = device_create_file(&intf->dev,
 						&dev_attr_iCountryCodeRelDate);
 		if (i < 0) {
+			device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
 			kfree(acm->country_codes);
 			goto skip_countries;
 		}
@@ -1300,6 +1301,7 @@ alloc_fail8:
 		usb_free_urb(acm->wb[i].urb);
 alloc_fail7:
 	acm_read_buffers_free(acm);
+alloc_fail6:
 	for (i = 0; i < num_rx_buf; i++)
 		usb_free_urb(acm->ru[i].urb);
 	usb_free_urb(acm->ctrlurb);
@@ -1594,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ded550eda5d..a6bd53ace03 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1272,8 +1272,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 
 static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
 {
-	int			w, i;
-	struct usb_interface	*intf;
+	int	w;
 
 	/* Remote wakeup is needed only when we actually go to sleep.
 	 * For things like FREEZE and QUIESCE, if the device is already
@@ -1285,16 +1284,10 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
 		return;
 	}
 
-	/* If remote wakeup is permitted, see whether any interface drivers
+	/* Enable remote wakeup if it is allowed, even if no interface drivers
 	 * actually want it.
 	 */
-	w = 0;
-	if (device_may_wakeup(&udev->dev) && udev->actconfig) {
-		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
-			intf = udev->actconfig->interface[i];
-			w |= intf->needs_remote_wakeup;
-		}
-	}
+	w = device_may_wakeup(&udev->dev);
 
 	/* If the device is autosuspended with the wrong wakeup setting,
 	 * autoresume now so the setting can be changed.
@@ -1328,6 +1321,7 @@ int usb_resume(struct device *dev, pm_message_t msg)
 
 	/* For all other calls, take the device back to full power and
 	 * tell the PM core in case it was autosuspended previously.
+	 * Unbind the interfaces that will need rebinding later.
 	 */
 	} else {
 		status = usb_resume_both(udev, msg);
@@ -1336,6 +1330,7 @@ int usb_resume(struct device *dev, pm_message_t msg)
 			pm_runtime_set_active(dev);
 			pm_runtime_enable(dev);
 			udev->last_busy = jiffies;
+			do_unbind_rebind(udev, DO_REBIND);
 		}
 	}
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbbe97f..70cccc75a36 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
 				udev->speed = USB_SPEED_WIRELESS;
+			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+				udev->speed = USB_SPEED_SUPER;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index a73e08fdab3..fd4c36ea5e4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -416,8 +416,11 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 			/* A length of zero means transfer the whole sg list */
 			len = length;
 			if (len == 0) {
-				for_each_sg(sg, sg, nents, i)
-					len += sg->length;
+				struct scatterlist	*sg2;
+				int			j;
+
+				for_each_sg(sg, sg2, nents, j)
+					len += sg2->length;
 			}
 		} else {
 			/*
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03df8b1..db99c084df9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Artisman Watchdog Dongle */
+	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
+	/* Broadcom BCM92035DGROM BT dongle */
+	{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 649c0c5f715..591ae9fde19 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -295,6 +295,7 @@ config USB_GADGET_S3C_HSOTG
 	boolean "S3C HS/OtG USB Device controller"
 	depends on S3C_DEV_USB_HSOTG
 	select USB_GADGET_S3C_HSOTG_PIO
+	select USB_GADGET_DUALSPEED
 	help
 	  The Samsung S3C64XX USB2.0 high-speed gadget controller
 	  integrated into the S3C64XX series SoC.
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index eaa79c8a9b8..93ead19507b 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,11 +76,12 @@
 static const char driver_name [] = "at91_udc";
 static const char ep0name[] = "ep0";
 
+#define VBUS_POLL_TIMEOUT	msecs_to_jiffies(1000)
 
-#define at91_udp_read(dev, reg) \
-	__raw_readl((dev)->udp_baseaddr + (reg))
-#define at91_udp_write(dev, reg, val) \
-	__raw_writel((val), (dev)->udp_baseaddr + (reg))
+#define at91_udp_read(udc, reg) \
+	__raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+	__raw_writel((val), (udc)->udp_baseaddr + (reg))
 
 /*-------------------------------------------------------------------------*/
 
@@ -102,8 +103,9 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
 	u32			csr;
 	struct at91_request	*req;
 	unsigned long	flags;
+	struct at91_udc	*udc = ep->udc;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	csr = __raw_readl(ep->creg);
 
@@ -147,7 +149,7 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
 				&req->req, length,
 				req->req.length, req->req.buf);
 	}
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
@@ -272,7 +274,9 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status)
 		VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
 
 	ep->stopped = 1;
+	spin_unlock(&udc->lock);
 	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
 	ep->stopped = stopped;
 
 	/* ep0 is always ready; other endpoints need a non-empty queue */
@@ -472,7 +476,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
-	struct at91_udc	*dev = ep->udc;
+	struct at91_udc	*udc = ep->udc;
 	u16		maxpacket;
 	u32		tmp;
 	unsigned long	flags;
@@ -487,7 +491,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("bogus device state\n");
 		return -ESHUTDOWN;
 	}
@@ -521,7 +525,7 @@ bogus_max:
 	}
 
 ok:
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	/* initialize endpoint to match this descriptor */
 	ep->is_in = usb_endpoint_dir_in(desc);
@@ -540,10 +544,10 @@ ok:
 	 * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
 	 * since endpoint resets don't reset hw pingpong state.
 	 */
-	at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
-	at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+	at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+	at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -556,7 +560,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
 	if (ep == &ep->udc->ep[0])
 		return -EINVAL;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	nuke(ep, -ESHUTDOWN);
 
@@ -571,7 +575,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
 		__raw_writel(0, ep->creg);
 	}
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -607,7 +611,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
 {
 	struct at91_request	*req;
 	struct at91_ep		*ep;
-	struct at91_udc		*dev;
+	struct at91_udc		*udc;
 	int			status;
 	unsigned long		flags;
 
@@ -625,9 +629,9 @@ static int at91_ep_queue(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	dev = ep->udc;
+	udc = ep->udc;
 
-	if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+	if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("invalid device\n");
 		return -EINVAL;
 	}
@@ -635,7 +639,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
 	_req->status = -EINPROGRESS;
 	_req->actual = 0;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	/* try to kickstart any empty and idle queue */
 	if (list_empty(&ep->queue) && !ep->stopped) {
@@ -653,7 +657,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
 		if (is_ep0) {
 			u32	tmp;
 
-			if (!dev->req_pending) {
+			if (!udc->req_pending) {
 				status = -EINVAL;
 				goto done;
 			}
@@ -662,11 +666,11 @@ static int at91_ep_queue(struct usb_ep *_ep,
 			 * defer changing CONFG until after the gadget driver
 			 * reconfigures the endpoints.
 			 */
-			if (dev->wait_for_config_ack) {
-				tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+			if (udc->wait_for_config_ack) {
+				tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
 				tmp ^= AT91_UDP_CONFG;
 				VDBG("toggle config\n");
-				at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+				at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
 			}
 			if (req->req.length == 0) {
 ep0_in_status:
@@ -676,7 +680,7 @@ ep0_in_status:
 				tmp &= ~SET_FX;
 				tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
 				__raw_writel(tmp, ep->creg);
-				dev->req_pending = 0;
+				udc->req_pending = 0;
 				goto done;
 			}
 		}
@@ -695,31 +699,40 @@ ep0_in_status:
 
 	if (req && !status) {
 		list_add_tail (&req->queue, &ep->queue);
-		at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
 	}
 done:
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return (status < 0) ? status : 0;
 }
 
 static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
-	struct at91_ep	*ep;
+	struct at91_ep		*ep;
 	struct at91_request	*req;
+	unsigned long		flags;
+	struct at91_udc		*udc;
 
 	ep = container_of(_ep, struct at91_ep, ep);
 	if (!_ep || ep->ep.name == ep0name)
 		return -EINVAL;
 
+	udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
 	/* make sure it's actually queued on this endpoint */
 	list_for_each_entry (req, &ep->queue, queue) {
 		if (&req->req == _req)
 			break;
 	}
-	if (&req->req != _req)
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
 		return -EINVAL;
+	}
 
 	done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -736,7 +749,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 		return -EINVAL;
 
 	creg = ep->creg;
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	csr = __raw_readl(creg);
 
@@ -761,7 +774,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 		__raw_writel(csr, creg);
 	}
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return status;
 }
 
@@ -795,7 +808,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
 	unsigned long	flags;
 
 	DBG("%s\n", __func__ );
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	if (!udc->clocked || !udc->suspended)
 		goto done;
@@ -809,7 +822,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
 	at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
 
 done:
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return status;
 }
 
@@ -851,8 +864,11 @@ static void stop_activity(struct at91_udc *udc)
 		ep->stopped = 1;
 		nuke(ep, -ESHUTDOWN);
 	}
-	if (driver)
+	if (driver) {
+		spin_unlock(&udc->lock);
 		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
 
 	udc_reinit(udc);
 }
@@ -935,13 +951,13 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
 	unsigned long	flags;
 
 	// VDBG("vbus %s\n", is_active ? "on" : "off");
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->vbus = (is_active != 0);
 	if (udc->driver)
 		pullup(udc, is_active);
 	else
 		pullup(udc, 0);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -950,10 +966,10 @@ static int at91_pullup(struct usb_gadget *gadget, int is_on)
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->enabled = is_on = !!is_on;
 	pullup(udc, is_on);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -962,9 +978,9 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->selfpowered = (is_on != 0);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -1226,8 +1242,11 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 #undef w_length
 
 	/* pass request up to the gadget driver */
-	if (udc->driver)
+	if (udc->driver) {
+		spin_unlock(&udc->lock);
 		status = udc->driver->setup(&udc->gadget, &pkt.r);
+		spin_lock(&udc->lock);
+	}
 	else
 		status = -ENODEV;
 	if (status < 0) {
@@ -1378,6 +1397,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 	struct at91_udc		*udc = _udc;
 	u32			rescans = 5;
 	int			disable_clock = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
 
 	if (!udc->clocked) {
 		clk_on(udc);
@@ -1433,8 +1455,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			 * and then into standby to avoid drawing more than
 			 * 500uA power (2500uA for some high-power configs).
 			 */
-			if (udc->driver && udc->driver->suspend)
+			if (udc->driver && udc->driver->suspend) {
+				spin_unlock(&udc->lock);
 				udc->driver->suspend(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
 
 		/* host initiated resume */
 		} else if (status & AT91_UDP_RXRSM) {
@@ -1451,8 +1476,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			 * would normally want to switch out of slow clock
 			 * mode into normal mode.
 			 */
-			if (udc->driver && udc->driver->resume)
+			if (udc->driver && udc->driver->resume) {
+				spin_unlock(&udc->lock);
 				udc->driver->resume(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
 
 		/* endpoint IRQs are cleared by handling them */
 		} else {
@@ -1474,6 +1502,8 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 	if (disable_clock)
 		clk_off(udc);
 
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return IRQ_HANDLED;
 }
 
@@ -1556,24 +1586,53 @@ static struct at91_udc controller = {
 	/* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
 
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+	value ^= udc->board.vbus_active_low;
+	if (value != udc->vbus)
+		at91_vbus_session(&udc->gadget, value);
+}
+
 static irqreturn_t at91_vbus_irq(int irq, void *_udc)
 {
 	struct at91_udc	*udc = _udc;
-	unsigned	value;
 
 	/* vbus needs at least brief debouncing */
 	udelay(10);
-	value = gpio_get_value(udc->board.vbus_pin);
-	if (value != udc->vbus)
-		at91_vbus_session(&udc->gadget, value);
+	at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
 
 	return IRQ_HANDLED;
 }
 
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+	struct at91_udc *udc = container_of(work, struct at91_udc,
+					    vbus_timer_work);
+
+	at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+	if (!timer_pending(&udc->vbus_timer))
+		mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+	struct at91_udc *udc = (struct at91_udc *)data;
+
+	/*
+	 * If we are polling vbus it is likely that the gpio is on an
+	 * bus such as i2c or spi which may sleep, so schedule some work
+	 * to read the vbus gpio
+	 */
+	if (!work_pending(&udc->vbus_timer_work))
+		schedule_work(&udc->vbus_timer_work);
+}
+
 int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 {
 	struct at91_udc	*udc = &controller;
 	int		retval;
+	unsigned long	flags;
 
 	if (!driver
 			|| driver->speed < USB_SPEED_FULL
@@ -1605,9 +1664,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 		return retval;
 	}
 
-	local_irq_disable();
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(udc, 1);
-	local_irq_enable();
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	DBG("bound to %s\n", driver->driver.name);
 	return 0;
@@ -1617,15 +1676,16 @@ EXPORT_SYMBOL (usb_gadget_register_driver);
 int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 {
 	struct at91_udc *udc = &controller;
+	unsigned long	flags;
 
 	if (!driver || driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
-	local_irq_disable();
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->enabled = 0;
 	at91_udp_write(udc, AT91_UDP_IDR, ~0);
 	pullup(udc, 0);
-	local_irq_enable();
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
@@ -1641,8 +1701,13 @@ EXPORT_SYMBOL (usb_gadget_unregister_driver);
 
 static void at91udc_shutdown(struct platform_device *dev)
 {
+	struct at91_udc *udc = platform_get_drvdata(dev);
+	unsigned long	flags;
+
 	/* force disconnect on reboot */
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(platform_get_drvdata(dev), 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static int __init at91udc_probe(struct platform_device *pdev)
@@ -1683,6 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	udc->board = *(struct at91_udc_data *) dev->platform_data;
 	udc->pdev = pdev;
 	udc->enabled = 0;
+	spin_lock_init(&udc->lock);
 
 	/* rm9200 needs manual D+ pullup; off by default */
 	if (cpu_is_at91rm9200()) {
@@ -1763,13 +1829,23 @@ static int __init at91udc_probe(struct platform_device *pdev)
 		 * Get the initial state of VBUS - we cannot expect
 		 * a pending interrupt.
 		 */
-		udc->vbus = gpio_get_value(udc->board.vbus_pin);
-		if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
-				IRQF_DISABLED, driver_name, udc)) {
-			DBG("request vbus irq %d failed\n",
-					udc->board.vbus_pin);
-			retval = -EBUSY;
-			goto fail3;
+		udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+			udc->board.vbus_active_low;
+
+		if (udc->board.vbus_polled) {
+			INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+			setup_timer(&udc->vbus_timer, at91_vbus_timer,
+				    (unsigned long)udc);
+			mod_timer(&udc->vbus_timer,
+				  jiffies + VBUS_POLL_TIMEOUT);
+		} else {
+			if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+					IRQF_DISABLED, driver_name, udc)) {
+				DBG("request vbus irq %d failed\n",
+				    udc->board.vbus_pin);
+				retval = -EBUSY;
+				goto fail3;
+			}
 		}
 	} else {
 		DBG("no VBUS detection, assuming always-on\n");
@@ -1804,13 +1880,16 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	struct resource *res;
+	unsigned long	flags;
 
 	DBG("remove\n");
 
 	if (udc->driver)
 		return -EBUSY;
 
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(udc, 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	device_init_wakeup(&pdev->dev, 0);
 	remove_debug_file(udc);
@@ -1840,6 +1919,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	int		wake = udc->driver && device_may_wakeup(&pdev->dev);
+	unsigned long	flags;
 
 	/* Unless we can act normally to the host (letting it wake us up
 	 * whenever it has work for us) force disconnect.  Wakeup requires
@@ -1849,13 +1929,15 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 	if ((!udc->suspended && udc->addr)
 			|| !wake
 			|| at91_suspend_entering_slow_clock()) {
+		spin_lock_irqsave(&udc->lock, flags);
 		pullup(udc, 0);
 		wake = 0;
+		spin_unlock_irqrestore(&udc->lock, flags);
 	} else
 		enable_irq_wake(udc->udp_irq);
 
 	udc->active_suspend = wake;
-	if (udc->board.vbus_pin > 0 && wake)
+	if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
 		enable_irq_wake(udc->board.vbus_pin);
 	return 0;
 }
@@ -1863,15 +1945,20 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 static int at91udc_resume(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
+	unsigned long	flags;
 
-	if (udc->board.vbus_pin > 0 && udc->active_suspend)
+	if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+	    udc->active_suspend)
 		disable_irq_wake(udc->board.vbus_pin);
 
 	/* maybe reconnect to host; if so, clocks on */
 	if (udc->active_suspend)
 		disable_irq_wake(udc->udp_irq);
-	else
+	else {
+		spin_lock_irqsave(&udc->lock, flags);
 		pullup(udc, 1);
+		spin_unlock_irqrestore(&udc->lock, flags);
+	}
 	return 0;
 }
 #else
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index c65d6229589..108ca54f909 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -144,6 +144,9 @@ struct at91_udc {
 	struct proc_dir_entry		*pde;
 	void __iomem			*udp_baseaddr;
 	int				udp_irq;
+	spinlock_t			lock;
+	struct timer_list		vbus_timer;
+	struct work_struct		vbus_timer_work;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 43bf44514c4..b91115f84b1 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -101,7 +101,7 @@ static struct uac_feature_unit_descriptor_0 feature_unit_desc = {
 static struct usb_audio_control mute_control = {
 	.list = LIST_HEAD_INIT(mute_control.list),
 	.name = "Mute Control",
-	.type = UAC_MUTE_CONTROL,
+	.type = UAC_FU_MUTE,
 	/* Todo: add real Mute control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
@@ -110,7 +110,7 @@ static struct usb_audio_control mute_control = {
 static struct usb_audio_control volume_control = {
 	.list = LIST_HEAD_INIT(volume_control.list),
 	.name = "Volume Control",
-	.type = UAC_VOLUME_CONTROL,
+	.type = UAC_FU_VOLUME,
 	/* Todo: add real Volume control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 38226e9a371..95dd4662d6a 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -469,8 +469,7 @@ static int eem_unwrap(struct gether *port,
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);
 				crc2 = ~crc32_le(~0,
-						skb->data,
-						skb->len - ETH_FCS_LEN);
+						skb->data, len - ETH_FCS_LEN);
 			} else {
 				crc = get_unaligned_be32(skb->data + len
 							- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index d69eccf5f19..2aaa0f75c6c 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -136,7 +136,7 @@ struct ffs_data {
 	 * handling setup requests immidiatelly user space may be so
 	 * slow that another setup will be sent to the gadget but this
 	 * time not to us but another function and then there could be
-	 * a race.  Is taht the case? Or maybe we can use cdev->req
+	 * a race.  Is that the case? Or maybe we can use cdev->req
 	 * after all, maybe we just need some spinlock for that? */
 	struct usb_request		*ep0req;		/* P: mutex */
 	struct completion		ep0req_completion;	/* P: mutex */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 7d05a0be5c6..4ce899c9b16 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -321,8 +321,8 @@ struct fsg_dev;
 /* Data shared by all the FSG instances. */
 struct fsg_common {
 	struct usb_gadget	*gadget;
-	struct fsg_dev		*fsg;
-	struct fsg_dev		*prev_fsg;
+	struct fsg_dev		*fsg, *new_fsg;
+	wait_queue_head_t	fsg_wait;
 
 	/* filesem protects: backing files in use */
 	struct rw_semaphore	filesem;
@@ -351,7 +351,6 @@ struct fsg_common {
 	enum fsg_state		state;		/* For exception handling */
 	unsigned int		exception_req_tag;
 
-	u8			config, new_config;
 	enum data_direction	data_dir;
 	u32			data_size;
 	u32			data_size_from_cmnd;
@@ -595,7 +594,7 @@ static int fsg_setup(struct usb_function *f,
 	u16			w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
-	if (!fsg->common->config)
+	if (!fsg_is_set(fsg->common))
 		return -EOPNOTSUPP;
 
 	switch (ctrl->bRequest) {
@@ -2303,24 +2302,20 @@ static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
 	return -ENOMEM;
 }
 
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface.  The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_common *common, int altsetting)
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
 {
-	int	rc = 0;
-	int	i;
-	const struct usb_endpoint_descriptor	*d;
+	const struct usb_endpoint_descriptor *d;
+	struct fsg_dev *fsg;
+	int i, rc = 0;
 
 	if (common->running)
 		DBG(common, "reset interface\n");
 
 reset:
 	/* Deallocate the requests */
-	if (common->prev_fsg) {
-		struct fsg_dev *fsg = common->prev_fsg;
+	if (common->fsg) {
+		fsg = common->fsg;
 
 		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
 			struct fsg_buffhd *bh = &common->buffhds[i];
@@ -2345,88 +2340,53 @@ reset:
 			fsg->bulk_out_enabled = 0;
 		}
 
-		common->prev_fsg = 0;
+		common->fsg = NULL;
+		wake_up(&common->fsg_wait);
 	}
 
 	common->running = 0;
-	if (altsetting < 0 || rc != 0)
+	if (!new_fsg || rc)
 		return rc;
 
-	DBG(common, "set interface %d\n", altsetting);
+	common->fsg = new_fsg;
+	fsg = common->fsg;
 
-	if (fsg_is_set(common)) {
-		struct fsg_dev *fsg = common->fsg;
-		common->prev_fsg = common->fsg;
+	/* Enable the endpoints */
+	d = fsg_ep_desc(common->gadget,
+			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+	rc = enable_endpoint(common, fsg->bulk_in, d);
+	if (rc)
+		goto reset;
+	fsg->bulk_in_enabled = 1;
+
+	d = fsg_ep_desc(common->gadget,
+			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+	rc = enable_endpoint(common, fsg->bulk_out, d);
+	if (rc)
+		goto reset;
+	fsg->bulk_out_enabled = 1;
+	common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
-		/* Enable the endpoints */
-		d = fsg_ep_desc(common->gadget,
-				&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
-		rc = enable_endpoint(common, fsg->bulk_in, d);
+	/* Allocate the requests */
+	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		struct fsg_buffhd	*bh = &common->buffhds[i];
+
+		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
 		if (rc)
 			goto reset;
-		fsg->bulk_in_enabled = 1;
-
-		d = fsg_ep_desc(common->gadget,
-				&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
-		rc = enable_endpoint(common, fsg->bulk_out, d);
+		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
 		if (rc)
 			goto reset;
-		fsg->bulk_out_enabled = 1;
-		common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
-		clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
-		/* Allocate the requests */
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
-			struct fsg_buffhd	*bh = &common->buffhds[i];
-
-			rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
-			if (rc)
-				goto reset;
-			rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
-			if (rc)
-				goto reset;
-			bh->inreq->buf = bh->outreq->buf = bh->buf;
-			bh->inreq->context = bh->outreq->context = bh;
-			bh->inreq->complete = bulk_in_complete;
-			bh->outreq->complete = bulk_out_complete;
-		}
-
-		common->running = 1;
-		for (i = 0; i < common->nluns; ++i)
-			common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-		return rc;
-	} else {
-		return -EIO;
-	}
-}
-
-
-/*
- * Change our operational configuration.  This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions.  Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_common *common, u8 new_config)
-{
-	int	rc = 0;
-
-	/* Disable the single interface */
-	if (common->config != 0) {
-		DBG(common, "reset config\n");
-		common->config = 0;
-		rc = do_set_interface(common, -1);
+		bh->inreq->buf = bh->outreq->buf = bh->buf;
+		bh->inreq->context = bh->outreq->context = bh;
+		bh->inreq->complete = bulk_in_complete;
+		bh->outreq->complete = bulk_out_complete;
 	}
 
-	/* Enable the interface */
-	if (new_config != 0) {
-		common->config = new_config;
-		rc = do_set_interface(common, 0);
-		if (rc != 0)
-			common->config = 0;	/* Reset on errors */
-	}
+	common->running = 1;
+	for (i = 0; i < common->nluns; ++i)
+		common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
 	return rc;
 }
 
@@ -2437,9 +2397,7 @@ static int do_set_config(struct fsg_common *common, u8 new_config)
 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->prev_fsg = fsg->common->fsg;
-	fsg->common->fsg = fsg;
-	fsg->common->new_config = 1;
+	fsg->common->new_fsg = fsg;
 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
 	return 0;
 }
@@ -2447,9 +2405,7 @@ static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 static void fsg_disable(struct usb_function *f)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->prev_fsg = fsg->common->fsg;
-	fsg->common->fsg = fsg;
-	fsg->common->new_config = 0;
+	fsg->common->new_fsg = NULL;
 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
 }
 
@@ -2459,19 +2415,17 @@ static void fsg_disable(struct usb_function *f)
 static void handle_exception(struct fsg_common *common)
 {
 	siginfo_t		info;
-	int			sig;
 	int			i;
 	struct fsg_buffhd	*bh;
 	enum fsg_state		old_state;
-	u8			new_config;
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
-	int			rc;
 
 	/* Clear the existing signals.  Anything but SIGUSR1 is converted
 	 * into a high-priority EXIT exception. */
 	for (;;) {
-		sig = dequeue_signal_lock(current, &current->blocked, &info);
+		int sig =
+			dequeue_signal_lock(current, &current->blocked, &info);
 		if (!sig)
 			break;
 		if (sig != SIGUSR1) {
@@ -2482,7 +2436,7 @@ static void handle_exception(struct fsg_common *common)
 	}
 
 	/* Cancel all the pending transfers */
-	if (fsg_is_set(common)) {
+	if (likely(common->fsg)) {
 		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
 			bh = &common->buffhds[i];
 			if (bh->inreq_busy)
@@ -2523,7 +2477,6 @@ static void handle_exception(struct fsg_common *common)
 	common->next_buffhd_to_fill = &common->buffhds[0];
 	common->next_buffhd_to_drain = &common->buffhds[0];
 	exception_req_tag = common->exception_req_tag;
-	new_config = common->new_config;
 	old_state = common->state;
 
 	if (old_state == FSG_STATE_ABORT_BULK_OUT)
@@ -2573,12 +2526,12 @@ static void handle_exception(struct fsg_common *common)
 		break;
 
 	case FSG_STATE_CONFIG_CHANGE:
-		rc = do_set_config(common, new_config);
+		do_set_interface(common, common->new_fsg);
 		break;
 
 	case FSG_STATE_EXIT:
 	case FSG_STATE_TERMINATED:
-		do_set_config(common, 0);		/* Free resources */
+		do_set_interface(common, NULL);		/* Free resources */
 		spin_lock_irq(&common->lock);
 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
 		spin_unlock_irq(&common->lock);
@@ -2863,6 +2816,7 @@ buffhds_first_it:
 		goto error_release;
 	}
 	init_completion(&common->thread_notifier);
+	init_waitqueue_head(&common->fsg_wait);
 #undef OR
 
 
@@ -2957,9 +2911,17 @@ static void fsg_common_release(struct kref *ref)
 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
 
 	DBG(fsg, "unbind\n");
-	fsg_common_put(fsg->common);
+	if (fsg->common->fsg == fsg) {
+		fsg->common->new_fsg = NULL;
+		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		/* FIXME: make interruptible or killable somehow? */
+		wait_event(common->fsg_wait, common->fsg != fsg);
+	}
+
+	fsg_common_put(common);
 	usb_free_descriptors(fsg->function.descriptors);
 	usb_free_descriptors(fsg->function.hs_descriptors);
 	kfree(fsg);
@@ -2970,7 +2932,6 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_gadget	*gadget = c->cdev->gadget;
-	int			rc;
 	int			i;
 	struct usb_ep		*ep;
 
@@ -2996,6 +2957,11 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 	ep->driver_data = fsg->common;	/* claim the endpoint */
 	fsg->bulk_out = ep;
 
+	/* Copy descriptors */
+	f->descriptors = usb_copy_descriptors(fsg_fs_function);
+	if (unlikely(!f->descriptors))
+		return -ENOMEM;
+
 	if (gadget_is_dualspeed(gadget)) {
 		/* Assume endpoint addresses are the same for both speeds */
 		fsg_hs_bulk_in_desc.bEndpointAddress =
@@ -3003,16 +2969,17 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 		fsg_hs_bulk_out_desc.bEndpointAddress =
 			fsg_fs_bulk_out_desc.bEndpointAddress;
 		f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
-		if (unlikely(!f->hs_descriptors))
+		if (unlikely(!f->hs_descriptors)) {
+			usb_free_descriptors(f->descriptors);
 			return -ENOMEM;
+		}
 	}
 
 	return 0;
 
 autoconf_fail:
 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
-	rc = -ENOTSUPP;
-	return rc;
+	return -ENOTSUPP;
 }
 
 
@@ -3036,11 +3003,6 @@ static int fsg_add(struct usb_composite_dev *cdev,
 
 	fsg->function.name        = FSG_DRIVER_DESC;
 	fsg->function.strings     = fsg_strings_array;
-	fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
-	if (unlikely(!fsg->function.descriptors)) {
-		rc = -ENOMEM;
-		goto error_free_fsg;
-	}
 	fsg->function.bind        = fsg_bind;
 	fsg->function.unbind      = fsg_unbind;
 	fsg->function.setup       = fsg_setup;
@@ -3056,19 +3018,9 @@ static int fsg_add(struct usb_composite_dev *cdev,
 
 	rc = usb_add_function(c, &fsg->function);
 	if (unlikely(rc))
-		goto error_free_all;
-
-	fsg_common_get(fsg->common);
-	return 0;
-
-error_free_all:
-	usb_free_descriptors(fsg->function.descriptors);
-	/* fsg_bind() might have copied those; or maybe not? who cares
-	 * -- free it just in case. */
-	usb_free_descriptors(fsg->function.hs_descriptors);
-error_free_fsg:
-	kfree(fsg);
-
+		kfree(fsg);
+	else
+		fsg_common_get(fsg->common);
 	return rc;
 }
 
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index fc2611f8b32..be446b7e7ea 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -28,7 +28,7 @@
 
 #include "uvc.h"
 
-unsigned int uvc_trace_param;
+unsigned int uvc_gadget_trace_param;
 
 /* --------------------------------------------------------------------------
  * Function descriptors
@@ -61,12 +61,12 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
 #define UVC_INTF_VIDEO_STREAMING		1
 
 static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
-	.bLength		= USB_DT_INTERFACE_ASSOCIATION_SIZE,
+	.bLength		= sizeof(uvc_iad),
 	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
 	.bFirstInterface	= 0,
 	.bInterfaceCount	= 2,
 	.bFunctionClass		= USB_CLASS_VIDEO,
-	.bFunctionSubClass	= 0x03,
+	.bFunctionSubClass	= UVC_SC_VIDEO_INTERFACE_COLLECTION,
 	.bFunctionProtocol	= 0x00,
 	.iFunction		= 0,
 };
@@ -78,7 +78,7 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
 	.bAlternateSetting	= 0,
 	.bNumEndpoints		= 1,
 	.bInterfaceClass	= USB_CLASS_VIDEO,
-	.bInterfaceSubClass	= 0x01,
+	.bInterfaceSubClass	= UVC_SC_VIDEOCONTROL,
 	.bInterfaceProtocol	= 0x00,
 	.iInterface		= 0,
 };
@@ -106,7 +106,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
 	.bAlternateSetting	= 0,
 	.bNumEndpoints		= 0,
 	.bInterfaceClass	= USB_CLASS_VIDEO,
-	.bInterfaceSubClass	= 0x02,
+	.bInterfaceSubClass	= UVC_SC_VIDEOSTREAMING,
 	.bInterfaceProtocol	= 0x00,
 	.iInterface		= 0,
 };
@@ -118,7 +118,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
 	.bAlternateSetting	= 1,
 	.bNumEndpoints		= 1,
 	.bInterfaceClass	= USB_CLASS_VIDEO,
-	.bInterfaceSubClass	= 0x02,
+	.bInterfaceSubClass	= UVC_SC_VIDEOSTREAMING,
 	.bInterfaceProtocol	= 0x00,
 	.iInterface		= 0,
 };
@@ -603,15 +603,15 @@ uvc_bind_config(struct usb_configuration *c,
 
 	/* Validate the descriptors. */
 	if (control == NULL || control[0] == NULL ||
-	    control[0]->bDescriptorSubType != UVC_DT_HEADER)
+	    control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
 	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
-	    fs_streaming[0]->bDescriptorSubType != UVC_DT_INPUT_HEADER)
+	    fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
-	    hs_streaming[0]->bDescriptorSubType != UVC_DT_INPUT_HEADER)
+	    hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	uvc->desc.control = control;
@@ -656,6 +656,6 @@ error:
 	return ret;
 }
 
-module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+module_param_named(trace, uvc_gadget_trace_param, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(trace, "Trace level bitmask");
 
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index 8a5db7c4fe7..e18a6636c28 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -15,357 +15,7 @@
 #define _F_UVC_H_
 
 #include <linux/usb/composite.h>
-
-#define USB_CLASS_VIDEO_CONTROL		1
-#define USB_CLASS_VIDEO_STREAMING	2
-
-struct uvc_descriptor_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-} __attribute__ ((packed));
-
-struct uvc_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u16 bcdUVC;
-	__u16 wTotalLength;
-	__u32 dwClockFrequency;
-	__u8  bInCollection;
-	__u8  baInterfaceNr[];
-} __attribute__((__packed__));
-
-#define UVC_HEADER_DESCRIPTOR(n)	uvc_header_descriptor_##n
-
-#define DECLARE_UVC_HEADER_DESCRIPTOR(n) 			\
-struct UVC_HEADER_DESCRIPTOR(n) {				\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u16 bcdUVC;						\
-	__u16 wTotalLength;					\
-	__u32 dwClockFrequency;					\
-	__u8  bInCollection;					\
-	__u8  baInterfaceNr[n];					\
-} __attribute__ ((packed))
-
-struct uvc_input_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  iTerminal;
-} __attribute__((__packed__));
-
-struct uvc_output_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  bSourceID;
-	__u8  iTerminal;
-} __attribute__((__packed__));
-
-struct uvc_camera_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  iTerminal;
-	__u16 wObjectiveFocalLengthMin;
-	__u16 wObjectiveFocalLengthMax;
-	__u16 wOcularFocalLength;
-	__u8  bControlSize;
-	__u8  bmControls[3];
-} __attribute__((__packed__));
-
-struct uvc_selector_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  bNrInPins;
-	__u8  baSourceID[0];
-	__u8  iSelector;
-} __attribute__((__packed__));
-
-#define UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
-	uvc_selector_unit_descriptor_##n
-
-#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) 		\
-struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bUnitID;						\
-	__u8  bNrInPins;					\
-	__u8  baSourceID[n];					\
-	__u8  iSelector;					\
-} __attribute__ ((packed))
-
-struct uvc_processing_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  bSourceID;
-	__u16 wMaxMultiplier;
-	__u8  bControlSize;
-	__u8  bmControls[2];
-	__u8  iProcessing;
-} __attribute__((__packed__));
-
-struct uvc_extension_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  guidExtensionCode[16];
-	__u8  bNumControls;
-	__u8  bNrInPins;
-	__u8  baSourceID[0];
-	__u8  bControlSize;
-	__u8  bmControls[0];
-	__u8  iExtension;
-} __attribute__((__packed__));
-
-#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
-	uvc_extension_unit_descriptor_##p_##n
-
-#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) 		\
-struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bUnitID;						\
-	__u8  guidExtensionCode[16];				\
-	__u8  bNumControls;					\
-	__u8  bNrInPins;					\
-	__u8  baSourceID[p];					\
-	__u8  bControlSize;					\
-	__u8  bmControls[n];					\
-	__u8  iExtension;					\
-} __attribute__ ((packed))
-
-struct uvc_control_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u16 wMaxTransferSize;
-} __attribute__((__packed__));
-
-#define UVC_DT_HEADER				1
-#define UVC_DT_INPUT_TERMINAL			2
-#define UVC_DT_OUTPUT_TERMINAL			3
-#define UVC_DT_SELECTOR_UNIT			4
-#define UVC_DT_PROCESSING_UNIT			5
-#define UVC_DT_EXTENSION_UNIT			6
-
-#define UVC_DT_HEADER_SIZE(n)			(12+(n))
-#define UVC_DT_INPUT_TERMINAL_SIZE		8
-#define UVC_DT_OUTPUT_TERMINAL_SIZE		9
-#define UVC_DT_CAMERA_TERMINAL_SIZE(n)		(15+(n))
-#define UVC_DT_SELECTOR_UNIT_SIZE(n)		(6+(n))
-#define UVC_DT_PROCESSING_UNIT_SIZE(n)		(9+(n))
-#define UVC_DT_EXTENSION_UNIT_SIZE(p,n)		(24+(p)+(n))
-#define UVC_DT_CONTROL_ENDPOINT_SIZE		5
-
-struct uvc_input_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bNumFormats;
-	__u16 wTotalLength;
-	__u8  bEndpointAddress;
-	__u8  bmInfo;
-	__u8  bTerminalLink;
-	__u8  bStillCaptureMethod;
-	__u8  bTriggerSupport;
-	__u8  bTriggerUsage;
-	__u8  bControlSize;
-	__u8  bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
-	uvc_input_header_descriptor_##n_##p
-
-#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p)		\
-struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bNumFormats;					\
-	__u16 wTotalLength;					\
-	__u8  bEndpointAddress;					\
-	__u8  bmInfo;						\
-	__u8  bTerminalLink;					\
-	__u8  bStillCaptureMethod;				\
-	__u8  bTriggerSupport;					\
-	__u8  bTriggerUsage;					\
-	__u8  bControlSize;					\
-	__u8  bmaControls[p][n];				\
-} __attribute__ ((packed))
-
-struct uvc_output_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bNumFormats;
-	__u16 wTotalLength;
-	__u8  bEndpointAddress;
-	__u8  bTerminalLink;
-	__u8  bControlSize;
-	__u8  bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
-	uvc_output_header_descriptor_##n_##p
-
-#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p)		\
-struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bNumFormats;					\
-	__u16 wTotalLength;					\
-	__u8  bEndpointAddress;					\
-	__u8  bTerminalLink;					\
-	__u8  bControlSize;					\
-	__u8  bmaControls[p][n];				\
-} __attribute__ ((packed))
-
-struct uvc_format_uncompressed {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFormatIndex;
-	__u8  bNumFrameDescriptors;
-	__u8  guidFormat[16];
-	__u8  bBitsPerPixel;
-	__u8  bDefaultFrameIndex;
-	__u8  bAspectRatioX;
-	__u8  bAspectRatioY;
-	__u8  bmInterfaceFlags;
-	__u8  bCopyProtect;
-} __attribute__((__packed__));
-
-struct uvc_frame_uncompressed {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFrameIndex;
-	__u8  bmCapabilities;
-	__u16 wWidth;
-	__u16 wHeight;
-	__u32 dwMinBitRate;
-	__u32 dwMaxBitRate;
-	__u32 dwMaxVideoFrameBufferSize;
-	__u32 dwDefaultFrameInterval;
-	__u8  bFrameIntervalType;
-	__u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_FRAME_UNCOMPRESSED(n) \
-	uvc_frame_uncompressed_##n
-
-#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) 			\
-struct UVC_FRAME_UNCOMPRESSED(n) {				\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bFrameIndex;					\
-	__u8  bmCapabilities;					\
-	__u16 wWidth;						\
-	__u16 wHeight;						\
-	__u32 dwMinBitRate;					\
-	__u32 dwMaxBitRate;					\
-	__u32 dwMaxVideoFrameBufferSize;			\
-	__u32 dwDefaultFrameInterval;				\
-	__u8  bFrameIntervalType;				\
-	__u32 dwFrameInterval[n];				\
-} __attribute__ ((packed))
-
-struct uvc_format_mjpeg {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFormatIndex;
-	__u8  bNumFrameDescriptors;
-	__u8  bmFlags;
-	__u8  bDefaultFrameIndex;
-	__u8  bAspectRatioX;
-	__u8  bAspectRatioY;
-	__u8  bmInterfaceFlags;
-	__u8  bCopyProtect;
-} __attribute__((__packed__));
-
-struct uvc_frame_mjpeg {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFrameIndex;
-	__u8  bmCapabilities;
-	__u16 wWidth;
-	__u16 wHeight;
-	__u32 dwMinBitRate;
-	__u32 dwMaxBitRate;
-	__u32 dwMaxVideoFrameBufferSize;
-	__u32 dwDefaultFrameInterval;
-	__u8  bFrameIntervalType;
-	__u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_FRAME_MJPEG(n) \
-	uvc_frame_mjpeg_##n
-
-#define DECLARE_UVC_FRAME_MJPEG(n) 				\
-struct UVC_FRAME_MJPEG(n) {					\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubType;				\
-	__u8  bFrameIndex;					\
-	__u8  bmCapabilities;					\
-	__u16 wWidth;						\
-	__u16 wHeight;						\
-	__u32 dwMinBitRate;					\
-	__u32 dwMaxBitRate;					\
-	__u32 dwMaxVideoFrameBufferSize;			\
-	__u32 dwDefaultFrameInterval;				\
-	__u8  bFrameIntervalType;				\
-	__u32 dwFrameInterval[n];				\
-} __attribute__ ((packed))
-
-struct uvc_color_matching_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bColorPrimaries;
-	__u8  bTransferCharacteristics;
-	__u8  bMatrixCoefficients;
-} __attribute__((__packed__));
-
-#define UVC_DT_INPUT_HEADER			1
-#define UVC_DT_OUTPUT_HEADER			2
-#define UVC_DT_FORMAT_UNCOMPRESSED		4
-#define UVC_DT_FRAME_UNCOMPRESSED		5
-#define UVC_DT_FORMAT_MJPEG			6
-#define UVC_DT_FRAME_MJPEG			7
-#define UVC_DT_COLOR_MATCHING			13
-
-#define UVC_DT_INPUT_HEADER_SIZE(n, p)		(13+(n*p))
-#define UVC_DT_OUTPUT_HEADER_SIZE(n, p)		(9+(n*p))
-#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE		27
-#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n)	(26+4*(n))
-#define UVC_DT_FORMAT_MJPEG_SIZE		11
-#define UVC_DT_FRAME_MJPEG_SIZE(n)		(26+4*(n))
-#define UVC_DT_COLOR_MATCHING_SIZE		6
+#include <linux/usb/video.h>
 
 extern int uvc_bind_config(struct usb_configuration *c,
 			   const struct uvc_descriptor_header * const *control,
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index d0b8bde59e5..eafa6d2c5ed 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -30,7 +30,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35()) {
+	if (!cpu_is_mx35() && !cpu_is_mx25()) {
 		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
 		if (IS_ERR(mxc_ahb_clk))
 			return PTR_ERR(mxc_ahb_clk);
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 2928523268b..82506ca297d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2400,7 +2400,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
 static struct qe_udc __devinit *qe_udc_config(struct of_device *ofdev)
 {
 	struct qe_udc *udc;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	unsigned int tmp_addr = 0;
 	struct usb_device_para __iomem *usbpram;
 	unsigned int i;
@@ -2525,7 +2525,7 @@ static void qe_udc_release(struct device *dev)
 static int __devinit qe_udc_probe(struct of_device *ofdev,
 			const struct of_device_id *match)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct qe_ep *ep;
 	unsigned int ret = 0;
 	unsigned int i;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 4b0e4a040d6..d1af253a910 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -392,6 +392,17 @@ static int __gfs_do_config(struct usb_configuration *c,
 	if (unlikely(ret < 0))
 		return ret;
 
+	/* After previous do_configs there may be some invalid
+	 * pointers in c->interface array.  This happens every time
+	 * a user space function with fewer interfaces than a user
+	 * space function that was run before the new one is run.  The
+	 * compasit's set_config() assumes that if there is no more
+	 * then MAX_CONFIG_INTERFACES interfaces in a configuration
+	 * then there is a NULL pointer after the last interface in
+	 * c->interface array.  We need to make sure this is true. */
+	if (c->next_interface_id < ARRAY_SIZE(c->interface))
+		c->interface[c->next_interface_id] = NULL;
+
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 8b960deed68..c3caf1ac73c 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -537,35 +537,35 @@ struct m66592 {
 /*-------------------------------------------------------------------------*/
 static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
 {
-	return inw((unsigned long)m66592->reg + offset);
+	return ioread16(m66592->reg + offset);
 }
 
 static inline void m66592_read_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		len = (len + 3) / 4;
-		insl(fifoaddr, buf, len);
+		ioread32_rep(fifoaddr, buf, len);
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void m66592_write(struct m66592 *m66592, u16 val,
 				unsigned long offset)
 {
-	outw(val, (unsigned long)m66592->reg + offset);
+	iowrite16(val, m66592->reg + offset);
 }
 
 static inline void m66592_write_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		unsigned long count;
@@ -573,25 +573,25 @@ static inline void m66592_write_fifo(struct m66592 *m66592,
 		int i;
 
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
-					outb(pb[i], fifoaddr + (3 - i));
+					iowrite8(pb[i], fifoaddr + (3 - i));
 				else
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 			}
 		}
 	} else {
 		unsigned long odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		iowrite16_rep(fifoaddr, buf, len);
 		if (odd) {
 			unsigned char *p = buf + len*2;
-			outb(*p, fifoaddr);
+			iowrite8(*p, fifoaddr);
 		}
 	}
 }
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 43abf55d8c6..4c3ac5c4223 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -82,7 +82,7 @@ static struct class *usb_gadget_class;
 struct printer_dev {
 	spinlock_t		lock;		/* lock this structure */
 	/* lock buffer lists during read/write calls */
-	spinlock_t		lock_printer_io;
+	struct mutex		lock_printer_io;
 	struct usb_gadget	*gadget;
 	struct usb_request	*req;		/* for control responses */
 	u8			config;
@@ -567,7 +567,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* We will use this flag later to check if a printer reset happened
@@ -601,7 +601,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 		 * call or not.
 		 */
 		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -648,7 +648,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 		if (dev->reset_printer) {
 			list_add(&current_rx_req->list, &dev->rx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -673,7 +673,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 	dev->current_rx_buf = current_rx_buf;
 
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
 
@@ -697,7 +697,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	if (len == 0)
 		return -EINVAL;
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* Check if a printer reset happens while we have interrupts on */
@@ -713,7 +713,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		 * a NON-Blocking call or not.
 		 */
 		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -752,7 +752,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 		if (copy_from_user(req->buf, buf, size)) {
 			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return bytes_copied;
 		}
 
@@ -766,14 +766,14 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (dev->reset_printer) {
 			list_add(&req->list, &dev->tx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
 		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
 			list_add(&req->list, &dev->tx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -782,7 +782,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
 
@@ -820,11 +820,11 @@ printer_poll(struct file *fd, poll_table *wait)
 	unsigned long		flags;
 	int			status = 0;
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 	setup_rx_reqs(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	poll_wait(fd, &dev->rx_wait, wait);
 	poll_wait(fd, &dev->tx_wait, wait);
@@ -1461,7 +1461,7 @@ autoconf_fail:
 	}
 
 	spin_lock_init(&dev->lock);
-	spin_lock_init(&dev->lock_printer_io);
+	mutex_init(&dev->lock_printer_io);
 	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->tx_reqs_active);
 	INIT_LIST_HEAD(&dev->rx_reqs);
@@ -1594,7 +1594,7 @@ cleanup(void)
 {
 	int status;
 
-	spin_lock(&usb_printer_gadget.lock_printer_io);
+	mutex_lock(&usb_printer_gadget.lock_printer_io);
 	class_destroy(usb_gadget_class);
 	unregister_chrdev_region(g_printer_devno, 2);
 
@@ -1602,6 +1602,6 @@ cleanup(void)
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	spin_unlock(&usb_printer_gadget.lock_printer_io);
+	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d8921ea..980762453a9 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
 		udc_disable(udc);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()   do {} while (0)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 888d8f166c0..70a81784275 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1500,7 +1500,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
 
 	del_timer_sync(&r8a66597->timer);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 #ifdef CONFIG_HAVE_CLK
@@ -1578,7 +1578,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
 	r8a66597->timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 9a537aa0796..f763b5190af 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -91,7 +91,7 @@ struct r8a66597_ep {
 
 struct r8a66597 {
 	spinlock_t		lock;
-	unsigned long		reg;
+	void __iomem		*reg;
 
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
@@ -127,7 +127,7 @@ struct r8a66597 {
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
@@ -135,7 +135,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned char *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned int data;
 	int i;
 
@@ -144,7 +144,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 
 		/* aligned buf case */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			insl(fifoaddr, buf, len / 4);
+			ioread32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
@@ -152,7 +152,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x03))
-				data = inl(fifoaddr);
+				data = ioread32(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 		}
@@ -161,7 +161,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 
 		/* aligned buf case */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			insw(fifoaddr, buf, len / 2);
+			ioread16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -169,7 +169,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x01))
-				data = inw(fifoaddr);
+				data = ioread16(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
 		}
@@ -179,7 +179,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
@@ -187,21 +187,21 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       unsigned char *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	int adj = 0;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		/* 32-bit access only if buf is 32-bit aligned */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			outsl(fifoaddr, buf, len / 4);
+			iowrite32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
 	} else {
 		/* 16-bit access only if buf is 16-bit aligned */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			outsw(fifoaddr, buf, len / 2);
+			iowrite16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -216,7 +216,7 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 	}
 
 	for (i = 0; i < len; i++)
-		outb(buf[i], fifoaddr + adj - (i & adj));
+		iowrite8(buf[i], fifoaddr + adj - (i & adj));
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1f73b485732..26193eceb32 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -297,6 +297,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
  */
 static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 {
+	unsigned int ep;
+	unsigned int addr;
+	unsigned int size;
+	int timeout;
+	u32 val;
+
 	/* the ryu 2.6.24 release ahs
 	   writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
 	   writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
@@ -310,6 +316,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 	writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
 	       S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
 	       hsotg->regs + S3C_GNPTXFSIZ);
+
+	/* arange all the rest of the TX FIFOs, as some versions of this
+	 * block have overlapping default addresses. This also ensures
+	 * that if the settings have been changed, then they are set to
+	 * known values. */
+
+	/* start at the end of the GNPTXFSIZ, rounded up */
+	addr = 2048 + 1024;
+	size = 768;
+
+	/* currently we allocate TX FIFOs for all possible endpoints,
+	 * and assume that they are all the same size. */
+
+	for (ep = 0; ep <= 15; ep++) {
+		val = addr;
+		val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
+		addr += size;
+
+		writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
+	}
+
+	/* according to p428 of the design guide, we need to ensure that
+	 * all fifos are flushed before continuing */
+
+	writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
+	       S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
+
+	/* wait until the fifos are both flushed */
+	timeout = 100;
+	while (1) {
+		val = readl(hsotg->regs + S3C_GRSTCTL);
+
+		if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
+			break;
+
+		if (--timeout == 0) {
+			dev_err(hsotg->dev,
+				"%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+				__func__, val);
+		}
+
+		udelay(1);
+	}
+
+	dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
 }
 
 /**
@@ -2574,6 +2625,9 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
 	       hsotg->regs + S3C_DCTL);
 
+	/* must be at-least 3ms to allow bus to see disconnect */
+	msleep(3);
+
 	/* remove the soft-disconnect and let's go */
 	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
 
@@ -2730,6 +2784,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 
 	writel(0, hsotg->regs + S3C_DAINTMSK);
 
+	/* Be in disconnected state until gadget is registered */
+	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
 	if (0) {
 		/* post global nak until we're ready */
 		writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d5f4c1d45c9..ea2b3c7ebee 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 	else
 		dev->ep0state = EP0_OUT_DATA_PHASE;
 
+	if (!dev->driver)
+		return;
+
+	/* deliver the request to the gadget driver */
 	ret = dev->driver->setup(&dev->gadget, crq);
 	if (ret < 0) {
 		if (dev->req_config) {
@@ -1700,9 +1704,13 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	if (!driver || driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
-	dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
+	dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
 		driver->driver.name);
 
+	/* report disconnect */
+	if (driver->disconnect)
+		driver->disconnect(&udc->gadget);
+
 	driver->unbind(&udc->gadget);
 
 	device_del(&udc->gadget.dev);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 16bdf77f582..3e8dcb5455e 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -536,17 +536,11 @@ recycle:
 		list_move(&req->list, &port->read_pool);
 	}
 
-	/* Push from tty to ldisc; this is immediate with low_latency, and
-	 * may trigger callbacks to this driver ... so drop the spinlock.
+	/* Push from tty to ldisc; without low_latency set this is handled by
+	 * a workqueue, so we won't get callbacks and can hold port_lock
 	 */
 	if (tty && do_push) {
-		spin_unlock_irq(&port->port_lock);
 		tty_flip_buffer_push(tty);
-		wake_up_interruptible(&tty->read_wait);
-		spin_lock_irq(&port->port_lock);
-
-		/* tty may have been closed */
-		tty = port->port_tty;
 	}
 
 
@@ -784,11 +778,6 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 	port->open_count = 1;
 	port->openclose = false;
 
-	/* low_latency means ldiscs work in tasklet context, without
-	 * needing a workqueue schedule ... easier to keep up.
-	 */
-	tty->low_latency = 1;
-
 	/* if connected, start the I/O stream */
 	if (port->port_usb) {
 		struct gserial	*gser = port->port_usb;
@@ -1195,6 +1184,7 @@ void gserial_cleanup(void)
 	n_ports = 0;
 
 	tty_unregister_driver(gs_tty_driver);
+	put_tty_driver(gs_tty_driver);
 	gs_tty_driver = NULL;
 
 	pr_debug("%s: cleaned up ttyGS* support\n", __func__);
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 0a705e63c93..5b7919460fd 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -48,39 +48,6 @@ struct uvc_event
 #define UVC_INTF_STREAMING		1
 
 /* ------------------------------------------------------------------------
- * UVC constants & structures
- */
-
-/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
-#define UVC_STREAM_EOH				(1 << 7)
-#define UVC_STREAM_ERR				(1 << 6)
-#define UVC_STREAM_STI				(1 << 5)
-#define UVC_STREAM_RES				(1 << 4)
-#define UVC_STREAM_SCR				(1 << 3)
-#define UVC_STREAM_PTS				(1 << 2)
-#define UVC_STREAM_EOF				(1 << 1)
-#define UVC_STREAM_FID				(1 << 0)
-
-struct uvc_streaming_control {
-	__u16 bmHint;
-	__u8  bFormatIndex;
-	__u8  bFrameIndex;
-	__u32 dwFrameInterval;
-	__u16 wKeyFrameRate;
-	__u16 wPFrameRate;
-	__u16 wCompQuality;
-	__u16 wCompWindowSize;
-	__u16 wDelay;
-	__u32 dwMaxVideoFrameSize;
-	__u32 dwMaxPayloadTransferSize;
-	__u32 dwClockFrequency;
-	__u8  bmFramingInfo;
-	__u8  bPreferedVersion;
-	__u8  bMinVersion;
-	__u8  bMaxVersion;
-} __attribute__((__packed__));
-
-/* ------------------------------------------------------------------------
  * Debugging, printing and logging
  */
 
@@ -107,11 +74,11 @@ struct uvc_streaming_control {
 #define UVC_WARN_MINMAX				0
 #define UVC_WARN_PROBE_DEF			1
 
-extern unsigned int uvc_trace_param;
+extern unsigned int uvc_gadget_trace_param;
 
 #define uvc_trace(flag, msg...) \
 	do { \
-		if (uvc_trace_param & flag) \
+		if (uvc_gadget_trace_param & flag) \
 			printk(KERN_DEBUG "uvcvideo: " msg); \
 	} while (0)
 
@@ -137,9 +104,6 @@ extern unsigned int uvc_trace_param;
 #define UVC_MAX_REQUEST_SIZE			64
 #define UVC_MAX_EVENTS				4
 
-#define USB_DT_INTERFACE_ASSOCIATION_SIZE	8
-#define USB_CLASS_MISC				0xef
-
 /* ------------------------------------------------------------------------
  * Structures
  */
@@ -220,16 +184,10 @@ struct uvc_file_handle
 #define to_uvc_file_handle(handle) \
 	container_of(handle, struct uvc_file_handle, vfh)
 
-extern struct v4l2_file_operations uvc_v4l2_fops;
-
 /* ------------------------------------------------------------------------
  * Functions
  */
 
-extern int uvc_video_enable(struct uvc_video *video, int enable);
-extern int uvc_video_init(struct uvc_video *video);
-extern int uvc_video_pump(struct uvc_video *video);
-
 extern void uvc_endpoint_stream(struct uvc_device *dev);
 
 extern void uvc_function_connect(struct uvc_device *uvc);
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 43891991bf2..f7395ac5dc1 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -78,7 +78,8 @@
  *
  */
 
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+static void
+uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 {
 	mutex_init(&queue->mutex);
 	spin_lock_init(&queue->irqlock);
@@ -88,6 +89,28 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 }
 
 /*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	unsigned int i;
+
+	for (i = 0; i < queue->count; ++i) {
+		if (queue->buffer[i].vma_use_count != 0)
+			return -EBUSY;
+	}
+
+	if (queue->count) {
+		vfree(queue->mem);
+		queue->count = 0;
+	}
+
+	return 0;
+}
+
+/*
  * Allocate the video buffers.
  *
  * Pages are reserved to make sure they will not be swapped, as they will be
@@ -95,8 +118,9 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
  *
  * Buffers will be individually mapped, so they must all be page aligned.
  */
-int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
-		unsigned int buflength)
+static int
+uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+		  unsigned int buflength)
 {
 	unsigned int bufsize = PAGE_ALIGN(buflength);
 	unsigned int i;
@@ -150,28 +174,6 @@ done:
 	return ret;
 }
 
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
-	unsigned int i;
-
-	for (i = 0; i < queue->count; ++i) {
-		if (queue->buffer[i].vma_use_count != 0)
-			return -EBUSY;
-	}
-
-	if (queue->count) {
-		vfree(queue->mem);
-		queue->count = 0;
-	}
-
-	return 0;
-}
-
 static void __uvc_query_buffer(struct uvc_buffer *buf,
 		struct v4l2_buffer *v4l2_buf)
 {
@@ -195,8 +197,8 @@ static void __uvc_query_buffer(struct uvc_buffer *buf,
 	}
 }
 
-int uvc_query_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf)
+static int
+uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
 {
 	int ret = 0;
 
@@ -217,8 +219,8 @@ done:
  * Queue a video buffer. Attempting to queue a buffer that has already been
  * queued will return -EINVAL.
  */
-int uvc_queue_buffer(struct uvc_video_queue *queue,
-	struct v4l2_buffer *v4l2_buf)
+static int
+uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
 {
 	struct uvc_buffer *buf;
 	unsigned long flags;
@@ -298,8 +300,9 @@ static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking)
  * Dequeue a video buffer. If nonblocking is false, block until a buffer is
  * available.
  */
-int uvc_dequeue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf, int nonblocking)
+static int
+uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf,
+		   int nonblocking)
 {
 	struct uvc_buffer *buf;
 	int ret = 0;
@@ -359,8 +362,9 @@ done:
  * This function implements video queue polling and is intended to be used by
  * the device poll handler.
  */
-unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
-		poll_table *wait)
+static unsigned int
+uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+	       poll_table *wait)
 {
 	struct uvc_buffer *buf;
 	unsigned int mask = 0;
@@ -407,7 +411,8 @@ static struct vm_operations_struct uvc_vm_ops = {
  * This function implements video buffer memory mapping and is intended to be
  * used by the device mmap handler.
  */
-int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+static int
+uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
 {
 	struct uvc_buffer *uninitialized_var(buffer);
 	struct page *page;
@@ -458,6 +463,42 @@ done:
 }
 
 /*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and removes them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+	struct uvc_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	while (!list_empty(&queue->irqqueue)) {
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+		list_del(&buf->queue);
+		buf->state = UVC_BUF_STATE_ERROR;
+		wake_up(&buf->wait);
+	}
+	/* This must be protected by the irqlock spinlock to avoid race
+	 * conditions between uvc_queue_buffer and the disconnection event that
+	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+	 * state outside the queue code.
+	 */
+	if (disconnect)
+		queue->flags |= UVC_QUEUE_DISCONNECTED;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+/*
  * Enable or disable the video buffers queue.
  *
  * The queue must be enabled before starting video acquisition and must be
@@ -474,7 +515,7 @@ done:
  * This function can't be called from interrupt context. Use
  * uvc_queue_cancel() instead.
  */
-int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
 {
 	unsigned int i;
 	int ret = 0;
@@ -503,44 +544,8 @@ done:
 	return ret;
 }
 
-/*
- * Cancel the video buffers queue.
- *
- * Cancelling the queue marks all buffers on the irq queue as erroneous,
- * wakes them up and removes them from the queue.
- *
- * If the disconnect parameter is set, further calls to uvc_queue_buffer will
- * fail with -ENODEV.
- *
- * This function acquires the irq spinlock and can be called from interrupt
- * context.
- */
-void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
-{
-	struct uvc_buffer *buf;
-	unsigned long flags;
-
-	spin_lock_irqsave(&queue->irqlock, flags);
-	while (!list_empty(&queue->irqqueue)) {
-		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
-				       queue);
-		list_del(&buf->queue);
-		buf->state = UVC_BUF_STATE_ERROR;
-		wake_up(&buf->wait);
-	}
-	/* This must be protected by the irqlock spinlock to avoid race
-	 * conditions between uvc_queue_buffer and the disconnection event that
-	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
-	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
-	 * state outside the queue code.
-	 */
-	if (disconnect)
-		queue->flags |= UVC_QUEUE_DISCONNECTED;
-	spin_unlock_irqrestore(&queue->irqlock, flags);
-}
-
-struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
-		struct uvc_buffer *buf)
+static struct uvc_buffer *
+uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
 	unsigned long flags;
@@ -568,7 +573,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 	return nextbuf;
 }
 
-struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
+static struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
 {
 	struct uvc_buffer *buf = NULL;
 
diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h
index 7f5a33fe7ae..1812a8ecc5d 100644
--- a/drivers/usb/gadget/uvc_queue.h
+++ b/drivers/usb/gadget/uvc_queue.h
@@ -58,30 +58,10 @@ struct uvc_video_queue {
 	struct list_head irqqueue;
 };
 
-extern void uvc_queue_init(struct uvc_video_queue *queue,
-		enum v4l2_buf_type type);
-extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
-		unsigned int nbuffers, unsigned int buflength);
-extern int uvc_free_buffers(struct uvc_video_queue *queue);
-extern int uvc_query_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf);
-extern int uvc_queue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf);
-extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf, int nonblocking);
-extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
-extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
-extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
-		struct uvc_buffer *buf);
-extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
-		struct file *file, poll_table *wait);
-extern int uvc_queue_mmap(struct uvc_video_queue *queue,
-		struct vm_area_struct *vma);
 static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 {
 	return queue->flags & UVC_QUEUE_STREAMING;
 }
-extern struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue);
 
 #endif /* __KERNEL__ */
 
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index a7989f29837..2dcffdac86d 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -363,7 +363,7 @@ uvc_v4l2_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-struct v4l2_file_operations uvc_v4l2_fops = {
+static struct v4l2_file_operations uvc_v4l2_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uvc_v4l2_open,
 	.release	= uvc_v4l2_release,
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index de8cbc46518..b08f35438d7 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -271,7 +271,7 @@ error:
  * This function fills the available USB requests (listed in req_free) with
  * video data from the queued buffers.
  */
-int
+static int
 uvc_video_pump(struct uvc_video *video)
 {
 	struct usb_request *req;
@@ -328,7 +328,7 @@ uvc_video_pump(struct uvc_video *video)
 /*
  * Enable or disable the video stream.
  */
-int
+static int
 uvc_video_enable(struct uvc_video *video, int enable)
 {
 	unsigned int i;
@@ -367,7 +367,7 @@ uvc_video_enable(struct uvc_video *video, int enable)
 /*
  * Initialize the UVC video stream.
  */
-int
+static int
 uvc_video_init(struct uvc_video *video)
 {
 	INIT_LIST_HEAD(&video->req_free);
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 417fd688769..288d21155ab 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -28,10 +28,10 @@
 #include "config.c"
 #include "epautoconf.c"
 
-#include "f_uvc.c"
 #include "uvc_queue.c"
-#include "uvc_v4l2.c"
 #include "uvc_video.c"
+#include "uvc_v4l2.c"
+#include "f_uvc.c"
 
 /* --------------------------------------------------------------------------
  * Device descriptor
@@ -90,7 +90,7 @@ DECLARE_UVC_HEADER_DESCRIPTOR(1);
 static const struct UVC_HEADER_DESCRIPTOR(1) uvc_control_header = {
 	.bLength		= UVC_DT_HEADER_SIZE(1),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_HEADER,
+	.bDescriptorSubType	= UVC_VC_HEADER,
 	.bcdUVC			= cpu_to_le16(0x0100),
 	.wTotalLength		= 0, /* dynamic */
 	.dwClockFrequency	= cpu_to_le32(48000000),
@@ -101,7 +101,7 @@ static const struct UVC_HEADER_DESCRIPTOR(1) uvc_control_header = {
 static const struct uvc_camera_terminal_descriptor uvc_camera_terminal = {
 	.bLength		= UVC_DT_CAMERA_TERMINAL_SIZE(3),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_INPUT_TERMINAL,
+	.bDescriptorSubType	= UVC_VC_INPUT_TERMINAL,
 	.bTerminalID		= 1,
 	.wTerminalType		= cpu_to_le16(0x0201),
 	.bAssocTerminal		= 0,
@@ -118,7 +118,7 @@ static const struct uvc_camera_terminal_descriptor uvc_camera_terminal = {
 static const struct uvc_processing_unit_descriptor uvc_processing = {
 	.bLength		= UVC_DT_PROCESSING_UNIT_SIZE(2),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_PROCESSING_UNIT,
+	.bDescriptorSubType	= UVC_VC_PROCESSING_UNIT,
 	.bUnitID		= 2,
 	.bSourceID		= 1,
 	.wMaxMultiplier		= cpu_to_le16(16*1024),
@@ -131,7 +131,7 @@ static const struct uvc_processing_unit_descriptor uvc_processing = {
 static const struct uvc_output_terminal_descriptor uvc_output_terminal = {
 	.bLength		= UVC_DT_OUTPUT_TERMINAL_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_OUTPUT_TERMINAL,
+	.bDescriptorSubType	= UVC_VC_OUTPUT_TERMINAL,
 	.bTerminalID		= 3,
 	.wTerminalType		= cpu_to_le16(0x0101),
 	.bAssocTerminal		= 0,
@@ -144,7 +144,7 @@ DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(1, 2);
 static const struct UVC_INPUT_HEADER_DESCRIPTOR(1, 2) uvc_input_header = {
 	.bLength		= UVC_DT_INPUT_HEADER_SIZE(1, 2),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_INPUT_HEADER,
+	.bDescriptorSubType	= UVC_VS_INPUT_HEADER,
 	.bNumFormats		= 2,
 	.wTotalLength		= 0, /* dynamic */
 	.bEndpointAddress	= 0, /* dynamic */
@@ -161,7 +161,7 @@ static const struct UVC_INPUT_HEADER_DESCRIPTOR(1, 2) uvc_input_header = {
 static const struct uvc_format_uncompressed uvc_format_yuv = {
 	.bLength		= UVC_DT_FORMAT_UNCOMPRESSED_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FORMAT_UNCOMPRESSED,
+	.bDescriptorSubType	= UVC_VS_FORMAT_UNCOMPRESSED,
 	.bFormatIndex		= 1,
 	.bNumFrameDescriptors	= 2,
 	.guidFormat		=
@@ -181,7 +181,7 @@ DECLARE_UVC_FRAME_UNCOMPRESSED(3);
 static const struct UVC_FRAME_UNCOMPRESSED(3) uvc_frame_yuv_360p = {
 	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(3),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FRAME_UNCOMPRESSED,
+	.bDescriptorSubType	= UVC_VS_FRAME_UNCOMPRESSED,
 	.bFrameIndex		= 1,
 	.bmCapabilities		= 0,
 	.wWidth			= cpu_to_le16(640),
@@ -199,7 +199,7 @@ static const struct UVC_FRAME_UNCOMPRESSED(3) uvc_frame_yuv_360p = {
 static const struct UVC_FRAME_UNCOMPRESSED(1) uvc_frame_yuv_720p = {
 	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(1),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FRAME_UNCOMPRESSED,
+	.bDescriptorSubType	= UVC_VS_FRAME_UNCOMPRESSED,
 	.bFrameIndex		= 2,
 	.bmCapabilities		= 0,
 	.wWidth			= cpu_to_le16(1280),
@@ -215,7 +215,7 @@ static const struct UVC_FRAME_UNCOMPRESSED(1) uvc_frame_yuv_720p = {
 static const struct uvc_format_mjpeg uvc_format_mjpg = {
 	.bLength		= UVC_DT_FORMAT_MJPEG_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FORMAT_MJPEG,
+	.bDescriptorSubType	= UVC_VS_FORMAT_MJPEG,
 	.bFormatIndex		= 2,
 	.bNumFrameDescriptors	= 2,
 	.bmFlags		= 0,
@@ -232,7 +232,7 @@ DECLARE_UVC_FRAME_MJPEG(3);
 static const struct UVC_FRAME_MJPEG(3) uvc_frame_mjpg_360p = {
 	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(3),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FRAME_MJPEG,
+	.bDescriptorSubType	= UVC_VS_FRAME_MJPEG,
 	.bFrameIndex		= 1,
 	.bmCapabilities		= 0,
 	.wWidth			= cpu_to_le16(640),
@@ -250,7 +250,7 @@ static const struct UVC_FRAME_MJPEG(3) uvc_frame_mjpg_360p = {
 static const struct UVC_FRAME_MJPEG(1) uvc_frame_mjpg_720p = {
 	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(1),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_FRAME_MJPEG,
+	.bDescriptorSubType	= UVC_VS_FRAME_MJPEG,
 	.bFrameIndex		= 2,
 	.bmCapabilities		= 0,
 	.wWidth			= cpu_to_le16(1280),
@@ -266,7 +266,7 @@ static const struct UVC_FRAME_MJPEG(1) uvc_frame_mjpg_720p = {
 static const struct uvc_color_matching_descriptor uvc_color_matching = {
 	.bLength		= UVC_DT_COLOR_MATCHING_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubType	= UVC_DT_COLOR_MATCHING,
+	.bDescriptorSubType	= UVC_VS_COLORFORMAT,
 	.bColorPrimaries	= 1,
 	.bTransferCharacteristics	= 1,
 	.bMatrixCoefficients	= 4,
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ef3e88f0b3c..a3ef2a9d9dc 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1135,7 +1135,7 @@ MODULE_LICENSE ("GPL");
 
 #ifdef CONFIG_XPS_USB_HCD_XILINX
 #include "ehci-xilinx-of.c"
-#define OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
+#define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
 #endif
 
 #ifdef CONFIG_PLAT_ORION
@@ -1159,7 +1159,8 @@ MODULE_LICENSE ("GPL");
 #endif
 
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+    !defined(XILINX_OF_PLATFORM_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -1213,10 +1214,20 @@ static int __init ehci_hcd_init(void)
 	if (retval < 0)
 		goto clean3;
 #endif
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	retval = of_register_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean4;
+#endif
 	return retval;
 
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	/* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */
+clean4:
+#endif
 #ifdef OF_PLATFORM_DRIVER
-	/* of_unregister_platform_driver(&OF_PLATFORM_DRIVER); */
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
 clean3:
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
@@ -1243,6 +1254,9 @@ module_init(ehci_hcd_init);
 
 static void __exit ehci_hcd_cleanup(void)
 {
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+#endif
 #ifdef OF_PLATFORM_DRIVER
 	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
 #endif
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 544ccfd7056..a8ad8ac120a 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -182,7 +182,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	}
 	clk_enable(priv->usbclk);
 
-	if (!cpu_is_mx35()) {
+	if (!cpu_is_mx35() && !cpu_is_mx25()) {
 		priv->ahbclk = clk_get(dev, "usb_ahb");
 		if (IS_ERR(priv->ahbclk)) {
 			ret = PTR_ERR(priv->ahbclk);
@@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
-		if (otg_init(pdata->otg) != 0)
-			dev_err(dev, "unable to init transceiver\n");
-		else if (otg_set_vbus(pdata->otg, 1) != 0)
+		ret = otg_init(pdata->otg);
+		if (ret) {
+			dev_err(dev, "unable to init transceiver, probably missing\n");
+			ret = -ENODEV;
+			goto err_add;
+		}
+		ret = otg_set_vbus(pdata->otg, 1);
+		if (ret) {
 			dev_err(dev, "unable to enable vbus on transceiver\n");
+			goto err_add;
+		}
 	}
 
 	priv->hcd = hcd;
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 013972bbde5..4899f451add 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -151,7 +151,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
 static int __devinit
 ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dn = op->node;
+	struct device_node *dn = op->dev.of_node;
 	struct usb_hcd *hcd;
 	struct ehci_hcd	*ehci;
 	struct resource res;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 20a0dfe0fe3..0587ad4ce5c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
 
 /*-------------------------------------------------------------------------*/
 
-static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
 {
 	int tmp = 20;
-	unsigned long flags;
-
-	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 
 	isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
 	isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
@@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
 	}
 	if (!tmp)
 		pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	__isp1362_sw_reset(isp1362_hcd);
 	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
 }
 
@@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
 	if (isp1362_hcd->board && isp1362_hcd->board->reset)
 		isp1362_hcd->board->reset(hcd->self.controller, 1);
 	else
-		isp1362_sw_reset(isp1362_hcd);
+		__isp1362_sw_reset(isp1362_hcd);
 
 	if (isp1362_hcd->board && isp1362_hcd->board->clock)
 		isp1362_hcd->board->clock(hcd->self.controller, 0);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index 5151516ea1d..d995351f9be 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -65,7 +65,7 @@ static inline void delayed_insw(unsigned int addr, void *buf, int len)
 	unsigned short *bp = (unsigned short *)buf;
 	while (len--) {
 		DUMMY_DELAY_ACCESS;
-		*bp++ = inw((void *)addr);
+		*bp++ = inw(addr);
 	}
 }
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debdd79b..41816389477 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
 	__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()	do {} while (0)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 6db57ab6079..77be3c24a42 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
 	else if (speed == LSMODE)
 		rh->port |= USB_PORT_STAT_LOW_SPEED;
 
-	rh->port &= USB_PORT_STAT_RESET;
+	rh->port &= ~USB_PORT_STAT_RESET;
 	rh->port |= USB_PORT_STAT_ENABLE;
 }
 
@@ -2404,7 +2404,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
@@ -2496,7 +2496,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	init_timer(&r8a66597->rh_timer);
 	r8a66597->rh_timer.function = r8a66597_timer;
 	r8a66597->rh_timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 	/* make sure no interrupts are pending */
 	ret = r8a66597_clock_enable(r8a66597);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 228e3fb2385..95d0f5adfdc 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -112,7 +112,7 @@ struct r8a66597_root_hub {
 
 struct r8a66597 {
 	spinlock_t lock;
-	unsigned long reg;
+	void __iomem *reg;
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
@@ -170,67 +170,67 @@ static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597,
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		insl(fifoaddr, buf, count);
+		ioread32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
-			unsigned long tmp = inl(fifoaddr);
+			unsigned long tmp = ioread32(fifoaddr);
 			memcpy((unsigned char *)buf + count * 4, &tmp,
 			       len & 0x03);
 		}
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       unsigned long offset, u16 *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = (unsigned char *)buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 				else
-					outb(pb[i], fifoaddr + 3 - i);
+					iowrite8(pb[i], fifoaddr + 3 - i);
 			}
 		}
 	} else {
 		int odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 		if (unlikely(odd)) {
 			buf = &buf[len];
-			outb((unsigned char)*buf, fifoaddr);
+			iowrite8((unsigned char)*buf, fifoaddr);
 		}
 	}
 }
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91..2eb658d2639 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
 	return 0;
 }
 
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct xhci_ring	*ep_ring;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+	ep_ring = virt_dev->eps[0].ring;
+	/*
+	 * FIXME we don't keep track of the dequeue pointer very well after a
+	 * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+	 * host to our enqueue pointer.  This should only be called after a
+	 * configured device has reset, so all control transfers should have
+	 * been completed or cancelled before the reset.
+	 */
+	ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+	ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 	return EP_INTERVAL(interval);
 }
 
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
  * High speed endpoint descriptors can define "the number of additional
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
-	if (udev->speed != USB_SPEED_SUPER)
+	if (udev->speed != USB_SPEED_SUPER ||
+			!usb_endpoint_xfer_isoc(&ep->desc))
 		return 0;
 	return ep->ss_ep_comp.bmAttributes;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index edffd81fc25..11482b6b938 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -78,6 +78,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_NEC)
+		xhci->quirks |= XHCI_NEC_HOST;
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 36c858e5b52..bfc99a93945 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
  * set, but other sections talk about dealing with the chain bit set.  This was
  * fixed in the 0.96 specification errata, but we have to assume that all 0.95
  * xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
  */
-static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		bool consumer, bool more_trbs_coming)
 {
 	u32 chain;
 	union xhci_trb *next;
@@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 	while (last_trb(xhci, ring, ring->enq_seg, next)) {
 		if (!consumer) {
 			if (ring != xhci->event_ring) {
-				if (chain) {
-					next->link.control |= TRB_CHAIN;
-
-					/* Give this link TRB to the hardware */
-					wmb();
-					next->link.control ^= TRB_CYCLE;
-				} else {
+				/*
+				 * If the caller doesn't plan on enqueueing more
+				 * TDs before ringing the doorbell, then we
+				 * don't want to give the link TRB to the
+				 * hardware just yet.  We'll give the link TRB
+				 * back in prepare_ring() just before we enqueue
+				 * the TD at the top of the ring.
+				 */
+				if (!chain && !more_trbs_coming)
 					break;
+
+				/* If we're not dealing with 0.95 hardware,
+				 * carry over the chain bit of the previous TRB
+				 * (which may mean the chain bit is cleared).
+				 */
+				if (!xhci_link_trb_quirk(xhci)) {
+					next->link.control &= ~TRB_CHAIN;
+					next->link.control |= chain;
 				}
+				/* Give this link TRB to the hardware */
+				wmb();
+				next->link.control ^= TRB_CYCLE;
 			}
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
@@ -1071,6 +1088,15 @@ bandwidth_change:
 			xhci_warn(xhci, "Reset device command completion "
 					"for disabled slot %u\n", slot_id);
 		break;
+	case TRB_TYPE(TRB_NEC_GET_FW):
+		if (!(xhci->quirks & XHCI_NEC_HOST)) {
+			xhci->error_bitmask |= 1 << 6;
+			break;
+		}
+		xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
+				NEC_FW_MAJOR(event->status),
+				NEC_FW_MINOR(event->status));
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -1079,6 +1105,17 @@ bandwidth_change:
 	inc_deq(xhci, xhci->cmd_ring, false);
 }
 
+static void handle_vendor_event(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 trb_type;
+
+	trb_type = TRB_FIELD_TO_TYPE(event->generic.field[3]);
+	xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
+	if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
+		handle_cmd_completion(xhci, &event->event_cmd);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
@@ -1659,7 +1696,10 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 			update_ptrs = 0;
 		break;
 	default:
-		xhci->error_bitmask |= 1 << 3;
+		if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
+			handle_vendor_event(xhci, event);
+		else
+			xhci->error_bitmask |= 1 << 3;
 	}
 	/* Any of the above functions may drop and re-acquire the lock, so check
 	 * to make sure a watchdog timer didn't mark the host as non-responsive.
@@ -1684,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 /*
  * Generic function for queueing a TRB on a ring.
  * The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
  */
 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer,
+		bool consumer, bool more_trbs_coming,
 		u32 field1, u32 field2, u32 field3, u32 field4)
 {
 	struct xhci_generic_trb *trb;
@@ -1696,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	trb->field[1] = field2;
 	trb->field[2] = field3;
 	trb->field[3] = field4;
-	inc_enq(xhci, ring, consumer);
+	inc_enq(xhci, ring, consumer, more_trbs_coming);
 }
 
 /*
@@ -1965,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int trb_buff_len, this_sg_len, running_total;
 	bool first_trb;
 	u64 addr;
+	bool more_trbs_coming;
 
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
@@ -2050,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		length_field = TRB_LEN(trb_buff_len) |
 			remainder |
 			TRB_INTR_TARGET(0);
-		queue_trb(xhci, ep_ring, false,
+		if (num_trbs > 1)
+			more_trbs_coming = true;
+		else
+			more_trbs_coming = false;
+		queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2101,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int num_trbs;
 	struct xhci_generic_trb *start_trb;
 	bool first_trb;
+	bool more_trbs_coming;
 	int start_cycle;
 	u32 field, length_field;
 
@@ -2189,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		length_field = TRB_LEN(trb_buff_len) |
 			remainder |
 			TRB_INTR_TARGET(0);
-		queue_trb(xhci, ep_ring, false,
+		if (num_trbs > 1)
+			more_trbs_coming = true;
+		else
+			more_trbs_coming = false;
+		queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2268,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* Queue setup TRB - see section 6.4.1.2.1 */
 	/* FIXME better way to translate setup_packet into two u32 fields? */
 	setup = (struct usb_ctrlrequest *) urb->setup_packet;
-	queue_trb(xhci, ep_ring, false,
+	queue_trb(xhci, ep_ring, false, true,
 			/* FIXME endianness is probably going to bite my ass here. */
 			setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
 			setup->wIndex | setup->wLength << 16,
@@ -2284,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
-		queue_trb(xhci, ep_ring, false,
+		queue_trb(xhci, ep_ring, false, true,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
 				length_field,
@@ -2301,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		field = 0;
 	else
 		field = TRB_DIR_IN;
-	queue_trb(xhci, ep_ring, false,
+	queue_trb(xhci, ep_ring, false, false,
 			0,
 			0,
 			TRB_INTR_TARGET(0),
@@ -2327,18 +2380,21 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 		u32 field3, u32 field4, bool command_must_succeed)
 {
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+	int ret;
+
 	if (!command_must_succeed)
 		reserved_trbs++;
 
-	if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
-		if (!in_interrupt())
-			xhci_err(xhci, "ERR: No room for command on command ring\n");
+	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+			reserved_trbs, GFP_ATOMIC);
+	if (ret < 0) {
+		xhci_err(xhci, "ERR: No room for command on command ring\n");
 		if (command_must_succeed)
 			xhci_err(xhci, "ERR: Reserved TRB counting for "
 					"unfailable commands failed.\n");
-		return -ENOMEM;
+		return ret;
 	}
-	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+	queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
 			field4 | xhci->cmd_ring->cycle_state);
 	return 0;
 }
@@ -2378,6 +2434,12 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 			false);
 }
 
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+		u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	return queue_command(xhci, field1, field2, field3, field4, false);
+}
+
 /* Queue a reset device command TRB */
 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
 {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 40e0a0c221b..3998f72cd0c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,33 @@ int xhci_halt(struct xhci_hcd *xhci)
 }
 
 /*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	int ret;
+
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	temp |= (CMD_RUN);
+	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+			temp);
+	xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+	/*
+	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
+	 * running.
+	 */
+	ret = handshake(xhci, &xhci->op_regs->status,
+			STS_HALT, 0, XHCI_MAX_HALT_USEC);
+	if (ret == -ETIMEDOUT)
+		xhci_err(xhci, "Host took too long to start, "
+				"waited %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
+	return ret;
+}
+
+/*
  * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
  *
  * This resets pipelines, timers, counters, state machines, etc.
@@ -116,6 +143,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 {
 	u32 command;
 	u32 state;
+	int ret;
 
 	state = xhci_readl(xhci, &xhci->op_regs->status);
 	if ((state & STS_HALT) == 0) {
@@ -130,7 +158,17 @@ int xhci_reset(struct xhci_hcd *xhci)
 	/* XXX: Why does EHCI set this here?  Shouldn't other code do this? */
 	xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 
-	return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+	ret = handshake(xhci, &xhci->op_regs->command,
+			CMD_RESET, 0, 250 * 1000);
+	if (ret)
+		return ret;
+
+	xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n");
+	/*
+	 * xHCI cannot write to any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
 
@@ -448,17 +486,20 @@ int xhci_run(struct usb_hcd *hcd)
 
 	if (NUM_TEST_NOOPS > 0)
 		doorbell = xhci_setup_one_noop(xhci);
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_queue_vendor_command(xhci, 0, 0, 0,
+				TRB_TYPE(TRB_NEC_GET_FW));
+
+	if (xhci_start(xhci)) {
+		xhci_halt(xhci);
+		return -ENODEV;
+	}
 
-	temp = xhci_readl(xhci, &xhci->op_regs->command);
-	temp |= (CMD_RUN);
-	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
-			temp);
-	xhci_writel(xhci, temp, &xhci->op_regs->command);
-	/* Flush PCI posted writes */
-	temp = xhci_readl(xhci, &xhci->op_regs->command);
 	xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
 	if (doorbell)
 		(*doorbell)(xhci);
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_ring_cmd_db(xhci);
 
 	xhci_dbg(xhci, "Finished xhci_run\n");
 	return 0;
@@ -2093,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* If this is a Set Address to an unconfigured device, setup ep 0 */
 	if (!udev->config)
 		xhci_setup_addressable_virt_dev(xhci, udev);
+	else
+		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
 	/* Otherwise, assume the core has the device configured how it wants */
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dada2fb5926..6c7e3430ec9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -925,6 +925,7 @@ union xhci_trb {
 /* TRB bit mask */
 #define	TRB_TYPE_BITMASK	(0xfc00)
 #define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
 /* TRB type IDs */
 /* bulk, interrupt, isoc scatter/gather, and control data stage */
 #define TRB_NORMAL		1
@@ -992,6 +993,14 @@ union xhci_trb {
 #define TRB_MFINDEX_WRAP	39
 /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
 
+/* Nec vendor-specific command completion event. */
+#define	TRB_NEC_CMD_COMP	48
+/* Get NEC firmware revision. */
+#define	TRB_NEC_GET_FW		49
+
+#define NEC_FW_MINOR(p)		(((p) >> 0) & 0xff)
+#define NEC_FW_MAJOR(p)		(((p) >> 8) & 0xff)
+
 /*
  * TRBS_PER_SEGMENT must be a multiple of 4,
  * since the command ring is 64-byte aligned.
@@ -1172,6 +1181,7 @@ struct xhci_hcd {
 	unsigned int		quirks;
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
+#define XHCI_NEC_HOST		(1 << 2)
 };
 
 /* For testing purposes */
@@ -1282,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
@@ -1379,6 +1391,8 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+		u32 field1, u32 field2, u32 field3, u32 field4);
 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d930386b6..d25814c172b 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file)
 	}
 
 	if (!sisusb->devinit) {
-		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+		    sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
 			if (sisusb_init_gfxdevice(sisusb, 0)) {
 				mutex_unlock(&sisusb->lock);
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
 	sisusb->present = 1;
 
-	if (dev->speed == USB_SPEED_HIGH) {
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
 		int initscreen = 1;
 #ifdef INCL_SISUSB_CON
 		if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fad70bc8355..3b795c56221 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -219,8 +219,8 @@ static int musb_ulpi_write(struct otg_transceiver *otg,
 	return 0;
 }
 #else
-#define musb_ulpi_read(a, b)		NULL
-#define musb_ulpi_write(a, b, c)	NULL
+#define musb_ulpi_read		NULL
+#define musb_ulpi_write		NULL
 #endif
 
 static struct otg_io_access_ops musb_ulpi_access = {
@@ -451,10 +451,6 @@ void musb_hnp_stop(struct musb *musb)
  * @param power
  */
 
-#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
-		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
-		| MUSB_INTR_RESET)
-
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl, u8 power)
 {
@@ -642,7 +638,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		handled = IRQ_HANDLED;
 	}
 
-
+#endif
 	if (int_usb & MUSB_INTR_SUSPEND) {
 		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
 				otg_state_string(musb), devctl, power);
@@ -705,6 +701,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		}
 	}
 
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
 		void __iomem *mbase = musb->mregs;
@@ -1597,7 +1594,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
 	/* the core can interrupt us for multiple reasons; docs have
 	 * a generic interrupt flowchart to follow
 	 */
-	if (musb->int_usb & STAGE0_MASK)
+	if (musb->int_usb)
 		retval |= musb_stage0_irq(musb, musb->int_usb,
 				devctl, power);
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b22d02dea7d..91d67794e35 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -470,7 +470,8 @@ struct musb_csr_regs {
 
 struct musb_context_registers {
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
 	u32 otg_sysconfig, otg_forcestandby;
 #endif
 	u8 power;
@@ -484,7 +485,8 @@ struct musb_context_registers {
 	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
 };
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
 extern void musb_platform_save_context(struct musb *musb,
 		struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 1008044a3bb..dc66e4376d4 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel,
 	if (mode) {
 		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
 		BUG_ON(len < packet_sz);
-
-		if (packet_sz >= 64) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR16
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		} else if (packet_sz >= 32) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR8
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		} else if (packet_sz >= 16) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR4
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		}
 	}
+	csr |= MUSB_HSDMA_BURSTMODE_INCR16
+				<< MUSB_HSDMA_BURSTMODE_SHIFT;
 
 	csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
 		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f8f9a..3c48e77a0aa 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on);
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
 
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-#endif
-
 /*
  * Checks the revision. We need to use the DMA register as 3.0 does not
  * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index b1b34693294..d331b222ad2 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -59,12 +59,17 @@ static int ulpi_set_flags(struct otg_transceiver *otg)
 
 static int ulpi_init(struct otg_transceiver *otg)
 {
-	int i, vid, pid;
-
-	vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_VENDOR_ID_LOW);
-	pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
+	int i, vid, pid, ret;
+	u32 ulpi_id = 0;
+
+	for (i = 0; i < 4; i++) {
+		ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
+		if (ret < 0)
+			return ret;
+		ulpi_id = (ulpi_id << 8) | ret;
+	}
+	vid = ulpi_id & 0xffff;
+	pid = ulpi_id >> 16;
 
 	pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 3edda3ed822..fd35f73b572 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1239,8 +1239,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
-		dev_err(&port->dev,
-			"%s: port or port->private is NULL, status=%d\n",
+		pr_err("%s: port or port->private is NULL, status=%d\n",
 			__func__, status);
 		return;
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 050211afc07..e298dc4baed 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -653,7 +653,6 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
-	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
@@ -692,6 +691,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -738,6 +738,14 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -2005,6 +2013,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				"urb failed to set to rts/cts flow control\n");
 		}
 
+		/* raise DTR/RTS */
+		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/*
 		 * Xon/Xoff code
@@ -2052,6 +2062,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 			}
 		}
 
+		/* lower DTR/RTS */
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 	return;
 }
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 94d86c3febc..d01946db8fa 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -501,13 +501,6 @@
 #define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
 
 /*
- * Contec products (http://www.contec.com)
- * Submitted by Daniel Sangorrin
- */
-#define CONTEC_VID		0x06CE	/* Vendor ID */
-#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
-
-/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
@@ -703,6 +696,12 @@
 #define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
 
 /*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID			0x2100	/* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */
@@ -1024,3 +1023,12 @@
 #define MJSG_SR_RADIO_PID	0x9379
 #define MJSG_XM_RADIO_PID	0x937A
 #define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index f8424d1bfc1..585b7e66374 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -730,7 +730,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	mos7840_port = urb->context;
 	if (!mos7840_port) {
 		dbg("%s", "NULL mos7840_port pointer");
-		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8e12f..5cd30e4345c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb);
 #define AMOI_PRODUCT_H01			0x0800
 #define AMOI_PRODUCT_H01A			0x7002
 #define AMOI_PRODUCT_H02			0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2		0x0407
 
 #define DELL_VENDOR_ID				0x413C
 
@@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb);
 #define QISDA_PRODUCT_H21_4512			0x4512
 #define QISDA_PRODUCT_H21_4523			0x4523
 #define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4518			0x4518
 #define QISDA_PRODUCT_H20_4519			0x4519
 
 /* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
 
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },		/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },		/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 04bb759536b..cde67cacb2c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
 	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
@@ -139,6 +141,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 			return retval;
 		}
@@ -155,6 +158,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 			return retval;
 		}
@@ -163,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	default:
 		dev_err(&serial->dev->dev,
 			"unknown number of interfaces: %d\n", nintf);
+		kfree(data);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb08d78..d47b56e9e8c 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
+	{ USB_DEVICE(0x1199, 0x0301) },	/* Sierra Wireless USB Dongle 250U */
 	/* Sierra Wireless C597 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
 	/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 44716427c51..64ec073e89d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 
 	/* fill the common fields in the URB */
 	us->current_urb->context = &urb_done;
-	us->current_urb->actual_length = 0;
-	us->current_urb->error_count = 0;
-	us->current_urb->status = 0;
+	us->current_urb->transfer_flags = 0;
 
 	/* we assume that if transfer_buffer isn't us->iobuf then it
 	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index f13e56babe4..29e850a7a2f 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -872,7 +872,7 @@ static const struct file_operations vhost_net_fops = {
 };
 
 static struct miscdevice vhost_net_misc = {
-	VHOST_NET_MINOR,
+	MISC_DYNAMIC_MINOR,
 	"vhost-net",
 	&vhost_net_fops,
 };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1e6fec48797..3d94a147172 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,6 +8,9 @@ menu "Graphics support"
 config HAVE_FB_ATMEL
 	bool
 
+config HAVE_FB_IMX
+	bool
+
 source "drivers/char/agp/Kconfig"
 
 source "drivers/gpu/vga/Kconfig"
@@ -400,9 +403,6 @@ config FB_SA1100
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
-config HAVE_FB_IMX
-	bool
-
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
 	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 51fcc0a2c94..e45833ce975 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -242,7 +242,7 @@ void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
-	u32 color = rect->color, dx = rect->dx, width = rect->width, rotation = 0;
+	u32 color, dx = rect->dx, width = rect->width, rotation = 0;
 
 	if (par->asleep)
 		return;
@@ -253,8 +253,11 @@ void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 		return;
 	}
 
-	color |= (rect->color << 8);
-	color |= (rect->color << 16);
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+	    info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+		color = ((u32 *)(info->pseudo_palette))[rect->color];
+	else
+		color = rect->color;
 
 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 515cf1978d1..c4e17642d9c 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2872,7 +2872,7 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis
 		}
 
 #if 0
-		/* Power down TV DAC, taht saves a significant amount of power,
+		/* Power down TV DAC, that saves a significant amount of power,
 		 * we'll have something better once we actually have some TVOut
 		 * support
 		 */
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 40f61320ce1..34b2fc472fe 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -95,7 +95,7 @@ struct fb_bitfield rgb_bitfields[][4] =
 	{ { 8, 4, 0 },  { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
 };
 
-static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+static struct fb_fix_screeninfo au1100fb_fix __devinitdata = {
 	.id		= "AU1100 FB",
 	.xpanstep 	= 1,
 	.ypanstep 	= 1,
@@ -103,7 +103,7 @@ static struct fb_fix_screeninfo au1100fb_fix __initdata = {
 	.accel		= FB_ACCEL_NONE,
 };
 
-static struct fb_var_screeninfo au1100fb_var __initdata = {
+static struct fb_var_screeninfo au1100fb_var __devinitdata = {
 	.activate	= FB_ACTIVATE_NOW,
 	.height		= -1,
 	.width		= -1,
@@ -458,7 +458,7 @@ static struct fb_ops au1100fb_ops =
 
 /* AU1100 LCD controller device driver */
 
-static int __init au1100fb_drv_probe(struct platform_device *dev)
+static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 {
 	struct au1100fb_device *fbdev = NULL;
 	struct resource *regs_res;
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 921ca37398f..3ec24609151 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -756,7 +756,6 @@ out:
 out1:
 	backlight_device_unregister(bl);
 out2:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return ret;
@@ -776,7 +775,6 @@ static int __devexit adp8860_remove(struct i2c_client *client)
 			&adp8860_bl_attr_group);
 
 	backlight_device_unregister(data->bl);
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return 0;
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index e03e60bbfd8..2a04b382ec4 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -119,7 +119,6 @@ static int __devinit tosa_bl_probe(struct i2c_client *client,
 
 err_reg:
 	data->bl = NULL;
-	i2c_set_clientdata(client, NULL);
 err_gpio_dir:
 	gpio_free(TOSA_GPIO_BL_C20MA);
 err_gpio_bl:
@@ -133,7 +132,6 @@ static int __devexit tosa_bl_remove(struct i2c_client *client)
 
 	backlight_device_unregister(data->bl);
 	data->bl = NULL;
-	i2c_set_clientdata(client, NULL);
 
 	gpio_free(TOSA_GPIO_BL_C20MA);
 
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 2c371c07f0d..09f1b9b462f 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -275,7 +275,7 @@ static int __devinit bw2_do_default_mode(struct bw2_par *par,
 
 static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct bw2_par *par;
 	int linebytes, err;
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index d12e05b6e63..e5dc2241194 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -465,7 +465,7 @@ static void cg14_unmap_regs(struct of_device *op, struct fb_info *info,
 
 static int __devinit cg14_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct cg14_par *par;
 	int is_8mb, linebytes, i, err;
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index b98f93f7f66..558d73a948a 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -349,7 +349,7 @@ static int __devinit cg3_do_default_mode(struct cg3_par *par)
 static int __devinit cg3_probe(struct of_device *op,
 			       const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct cg3_par *par;
 	int linebytes, err;
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 3a561df2e8a..0c1afd13ddd 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -388,6 +388,7 @@ cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		pseudo_val |= convert_bitfield(red, &var->red);
 		pseudo_val |= convert_bitfield(green, &var->green);
 		pseudo_val |= convert_bitfield(blue, &var->blue);
+		ret = 0;
 		break;
 	}
 
@@ -436,6 +437,8 @@ static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
 	cyber2000fb_writeb(i | 4, 0x3cf, cfb);
 	cyber2000fb_writeb(val, 0x3c6, cfb);
 	cyber2000fb_writeb(i, 0x3cf, cfb);
+	/* prevent card lock-up observed on x86 with CyberPro 2000 */
+	cyber2000fb_readb(0x3cf, cfb);
 }
 
 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 073c9b408cf..6b93ef93cb1 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -100,6 +100,16 @@ static int fb_deferred_io_mkwrite(struct vm_area_struct *vma,
 	/* protect against the workqueue changing the page list */
 	mutex_lock(&fbdefio->lock);
 
+	/*
+	 * We want the page to remain locked from ->page_mkwrite until
+	 * the PTE is marked dirty to avoid page_mkclean() being called
+	 * before the PTE is updated, which would leave the page ignored
+	 * by defio.
+	 * Do this by locking the page here and informing the caller
+	 * about it with VM_FAULT_LOCKED.
+	 */
+	lock_page(page);
+
 	/* we loop through the pagelist before adding in order
 	to keep the pagelist sorted */
 	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
@@ -121,7 +131,7 @@ page_already_added:
 
 	/* come back after delay to process the deferred IO */
 	schedule_delayed_work(&info->deferred_work, fbdefio->delay);
-	return 0;
+	return VM_FAULT_LOCKED;
 }
 
 static const struct vm_operations_struct fb_deferred_io_vm_ops = {
@@ -155,41 +165,25 @@ static void fb_deferred_io_work(struct work_struct *work)
 {
 	struct fb_info *info = container_of(work, struct fb_info,
 						deferred_work.work);
+	struct list_head *node, *next;
+	struct page *cur;
 	struct fb_deferred_io *fbdefio = info->fbdefio;
-	struct page *page, *tmp_page;
-	struct list_head *node, *tmp_node;
-	struct list_head non_dirty;
-
-	INIT_LIST_HEAD(&non_dirty);
 
 	/* here we mkclean the pages, then do all deferred IO */
 	mutex_lock(&fbdefio->lock);
-	list_for_each_entry_safe(page, tmp_page, &fbdefio->pagelist, lru) {
-		lock_page(page);
-		/*
-		 * The workqueue callback can be triggered after a
-		 * ->page_mkwrite() call but before the PTE has been marked
-		 * dirty. In this case page_mkclean() won't "rearm" the page.
-		 *
-		 * To avoid this, remove those "non-dirty" pages from the
-		 * pagelist before calling the driver's callback, then add
-		 * them back to get processed on the next work iteration.
-		 * At that time, their PTEs will hopefully be dirty for real.
-		 */
-		if (!page_mkclean(page))
-			list_move_tail(&page->lru, &non_dirty);
-		unlock_page(page);
+	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+		lock_page(cur);
+		page_mkclean(cur);
+		unlock_page(cur);
 	}
 
 	/* driver's callback with pagelist */
 	fbdefio->deferred_io(info, &fbdefio->pagelist);
 
-	/* clear the list... */
-	list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
+	/* clear the list */
+	list_for_each_safe(node, next, &fbdefio->pagelist) {
 		list_del(node);
 	}
-	/* ... and add back the "non-dirty" pages to the list */
-	list_splice_tail(&non_dirty, &fbdefio->pagelist);
 	mutex_unlock(&fbdefio->lock);
 }
 
@@ -218,7 +212,6 @@ EXPORT_SYMBOL_GPL(fb_deferred_io_open);
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	struct fb_deferred_io *fbdefio = info->fbdefio;
-	struct list_head *node, *tmp_node;
 	struct page *page;
 	int i;
 
@@ -226,13 +219,6 @@ void fb_deferred_io_cleanup(struct fb_info *info)
 	cancel_delayed_work(&info->deferred_work);
 	flush_scheduled_work();
 
-	/*  the list may have still some non-dirty pages at this point */
-	mutex_lock(&fbdefio->lock);
-	list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
-		list_del(node);
-	}
-	mutex_unlock(&fbdefio->lock);
-
 	/* clear out the mapping that we setup */
 	for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
 		page = fb_deferred_io_page(info, i);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 7d8c55d7fd2..ca3355e430b 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -91,10 +91,10 @@ static uint32_t pseudo_palette[16];
 static uint32_t gbe_cmap[256];
 static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
 
 /* default CRT mode */
-static struct fb_var_screeninfo default_var_CRT __initdata = {
+static struct fb_var_screeninfo default_var_CRT __devinitdata = {
 	/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
 	.xres		= 640,
 	.yres		= 480,
@@ -125,7 +125,7 @@ static struct fb_var_screeninfo default_var_CRT __initdata = {
 };
 
 /* default LCD mode */
-static struct fb_var_screeninfo default_var_LCD __initdata = {
+static struct fb_var_screeninfo default_var_LCD __devinitdata = {
 	/* 1600x1024, 8 bpp */
 	.xres		= 1600,
 	.yres		= 1024,
@@ -157,7 +157,7 @@ static struct fb_var_screeninfo default_var_LCD __initdata = {
 
 /* default modedb mode */
 /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
-static struct fb_videomode default_mode_CRT __initdata = {
+static struct fb_videomode default_mode_CRT __devinitdata = {
 	.refresh	= 60,
 	.xres		= 640,
 	.yres		= 480,
@@ -172,7 +172,7 @@ static struct fb_videomode default_mode_CRT __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 /* 1600x1024 SGI flatpanel 1600sw */
-static struct fb_videomode default_mode_LCD __initdata = {
+static struct fb_videomode default_mode_LCD __devinitdata = {
 	/* 1600x1024, 8 bpp */
 	.xres		= 1600,
 	.yres		= 1024,
@@ -186,8 +186,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __devinitdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __devinitdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
@@ -1098,7 +1098,7 @@ static void gbefb_create_sysfs(struct device *dev)
  * Initialization
  */
 
-static int __init gbefb_setup(char *options)
+static int __devinit gbefb_setup(char *options)
 {
 	char *this_opt;
 
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 76e7dac6f25..70b1d9d51c9 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -40,7 +40,7 @@ static int vram;
 static int vt_switch;
 
 /* Modes relevant to the GX (taken from modedb.c) */
-static struct fb_videomode gx_modedb[] __initdata = {
+static struct fb_videomode gx_modedb[] __devinitdata = {
 	/* 640x480-60 VESA */
 	{ NULL, 60, 640, 480, 39682,  48, 16, 33, 10, 96, 2,
 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -110,14 +110,15 @@ static struct fb_videomode gx_modedb[] __initdata = {
 #ifdef CONFIG_OLPC
 #include <asm/olpc.h>
 
-static struct fb_videomode gx_dcon_modedb[] __initdata = {
+static struct fb_videomode gx_dcon_modedb[] __devinitdata = {
 	/* The only mode the DCON has is 1200x900 */
 	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	  FB_VMODE_NONINTERLACED, 0 }
 };
 
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	if (olpc_has_dcon()) {
 		*modedb = (struct fb_videomode *) gx_dcon_modedb;
@@ -129,7 +130,8 @@ static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
 }
 
 #else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	*modedb = (struct fb_videomode *) gx_modedb;
 	*size = ARRAY_SIZE(gx_modedb);
@@ -226,7 +228,8 @@ static int gxfb_blank(int blank_mode, struct fb_info *info)
 	return gx_blank_display(info, blank_mode);
 }
 
-static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+static int __devinit gxfb_map_video_memory(struct fb_info *info,
+		struct pci_dev *dev)
 {
 	struct gxfb_par *par = info->par;
 	int ret;
@@ -290,7 +293,7 @@ static struct fb_ops gxfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+static struct fb_info *__devinit gxfb_init_fbinfo(struct device *dev)
 {
 	struct gxfb_par *par;
 	struct fb_info *info;
@@ -371,7 +374,8 @@ static int gxfb_resume(struct pci_dev *pdev)
 }
 #endif
 
-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit gxfb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
 {
 	struct gxfb_par *par;
 	struct fb_info *info;
@@ -451,7 +455,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	return ret;
 }
 
-static void gxfb_remove(struct pci_dev *pdev)
+static void __devexit gxfb_remove(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct gxfb_par *par = info->par;
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 1a18da86d3f..39bdbedf43b 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -35,7 +35,7 @@ static int vt_switch;
  * we try to make it something sane - 640x480-60 is sane
  */
 
-static struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __devinitdata = {
 	/* 640x480-60 */
 	{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
@@ -219,14 +219,15 @@ static struct fb_videomode geode_modedb[] __initdata = {
 #ifdef CONFIG_OLPC
 #include <asm/olpc.h>
 
-static struct fb_videomode olpc_dcon_modedb[] __initdata = {
+static struct fb_videomode olpc_dcon_modedb[] __devinitdata = {
 	/* The only mode the DCON has is 1200x900 */
 	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	  FB_VMODE_NONINTERLACED, 0 }
 };
 
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	if (olpc_has_dcon()) {
 		*modedb = (struct fb_videomode *) olpc_dcon_modedb;
@@ -238,7 +239,8 @@ static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
 }
 
 #else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	*modedb = (struct fb_videomode *) geode_modedb;
 	*size = ARRAY_SIZE(geode_modedb);
@@ -334,7 +336,7 @@ static int lxfb_blank(int blank_mode, struct fb_info *info)
 }
 
 
-static int __init lxfb_map_video_memory(struct fb_info *info,
+static int __devinit lxfb_map_video_memory(struct fb_info *info,
 					struct pci_dev *dev)
 {
 	struct lxfb_par *par = info->par;
@@ -412,7 +414,7 @@ static struct fb_ops lxfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+static struct fb_info * __devinit lxfb_init_fbinfo(struct device *dev)
 {
 	struct lxfb_par *par;
 	struct fb_info *info;
@@ -496,7 +498,7 @@ static int lxfb_resume(struct pci_dev *pdev)
 #define lxfb_resume NULL
 #endif
 
-static int __init lxfb_probe(struct pci_dev *pdev,
+static int __devinit lxfb_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *id)
 {
 	struct lxfb_par *par;
@@ -588,7 +590,7 @@ err:
 	return ret;
 }
 
-static void lxfb_remove(struct pci_dev *pdev)
+static void __devexit lxfb_remove(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct lxfb_par *par = info->par;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index b4b6deceed1..43f0639b1c1 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,6 +175,7 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+	struct backlight_device *bl;
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -449,6 +450,73 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
+
+
+static int imxfb_bl_get_brightness(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+
+	return readl(fbi->regs + LCDC_PWMR) & 0xFF;
+}
+
+static int imxfb_bl_update_status(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_enable(fbi->clk);
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_disable(fbi->clk);
+
+	return 0;
+}
+
+static const struct backlight_ops imxfb_lcdc_bl_ops = {
+	.update_status = imxfb_bl_update_status,
+	.get_brightness = imxfb_bl_get_brightness,
+};
+
+static void imxfb_init_backlight(struct imxfb_info *fbi)
+{
+	struct backlight_properties props;
+	struct backlight_device	*bl;
+
+	if (fbi->bl)
+		return;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+
+	bl = backlight_device_register("imxfb-bl", &fbi->pdev->dev, fbi,
+				       &imxfb_lcdc_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&fbi->pdev->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+
+	fbi->bl = bl;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.brightness = imxfb_bl_get_brightness(bl);
+}
+
+static void imxfb_exit_backlight(struct imxfb_info *fbi)
+{
+	if (fbi->bl)
+		backlight_device_unregister(fbi->bl);
+}
+
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
 	pr_debug("Enabling LCD controller\n");
@@ -579,7 +647,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
-	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -779,6 +846,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	}
 
 	imxfb_enable_controller(fbi);
+	fbi->pdev = pdev;
+	imxfb_init_backlight(fbi);
 
 	return 0;
 
@@ -816,6 +885,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+	imxfb_exit_backlight(fbi);
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 3d7895316ea..9e8bf7d5e24 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -550,7 +550,7 @@ static void leo_unmap_regs(struct of_device *op, struct fb_info *info,
 static int __devinit leo_probe(struct of_device *op,
 			       const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct leo_par *par;
 	int linebytes, err;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index 0540de4f5cb..4e2b8cc3d46 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -553,7 +553,7 @@ static int mb862xx_gdc_init(struct mb862xxfb_par *par)
 static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
 					       const struct of_device_id *id)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct device *dev = &ofdev->dev;
 	struct mb862xxfb_par *par;
 	struct fb_info *info;
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
index d4cde79ea15..81687ed26ba 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/nuc900fb.c
@@ -596,8 +596,6 @@ static int __devinit nuc900fb_probe(struct platform_device *pdev)
 		goto release_regs;
 	}
 
-	nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
-
 	fbi->clk = clk_get(&pdev->dev, NULL);
 	if (!fbi->clk || IS_ERR(fbi->clk)) {
 		printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 43ab7d8b66b..7767338f8b1 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -572,22 +572,12 @@ static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
 /* PM code called only in internal controller mode */
 static void omap_lcdc_suspend(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		disable_controller();
-		omap_stop_lcd_dma();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
 }
 
 static void omap_lcdc_resume(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		setup_regs();
-		load_palette();
-		setup_lcd_dma();
-		set_load_mode(OMAP_LCDC_LOAD_FRAME);
-		enable_irqs(OMAP_LCDC_IRQ_DONE);
-		enable_controller();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
 }
 
 static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 1162603c72e..eada9f12efc 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include "omapfb.h"
 #include "dispc.h"
@@ -83,13 +84,13 @@ static inline u32 rfbi_read_reg(int idx)
 
 static int rfbi_get_clocks(void)
 {
-	rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
+	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
 	if (IS_ERR(rfbi.dss_ick)) {
 		dev_err(rfbi.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
+	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
 	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 1f8eb70e293..07fbb8a733b 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -592,7 +592,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 	r = omapdss_sdi_display_enable(dssdev);
 	if (r) {
 		pr_err("%s sdi enable failed\n", __func__);
-		return r;
+		goto fail_unlock;
 	}
 
 	/*FIXME tweak me */
@@ -633,6 +633,8 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 	return acx565akm_bl_update_status(md->bl_dev);
 fail:
 	omapdss_sdi_display_disable(dssdev);
+fail_unlock:
+	mutex_unlock(&md->mutex);
 	return r;
 }
 
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 3b1237ad85e..f6fdc2085f3 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -25,7 +25,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/completion.h>
 #include <linux/debugfs.h>
 #include <linux/jiffies.h>
@@ -525,10 +525,8 @@ early_param("vram", omap_vram_early_vram);
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void __init omap_vram_reserve_sdram(void)
+void __init omap_vram_reserve_sdram_memblock(void)
 {
-	struct bootmem_data	*bdata;
-	unsigned long		sdram_start, sdram_size;
 	u32 paddr;
 	u32 size = 0;
 
@@ -555,29 +553,28 @@ void __init omap_vram_reserve_sdram(void)
 
 	size = PAGE_ALIGN(size);
 
-	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-
 	if (paddr) {
-		if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
-				paddr + size > sdram_start + sdram_size) {
+		struct memblock_property res;
+
+		res.base = paddr;
+		res.size = size;
+		if ((paddr & ~PAGE_MASK) || memblock_find(&res) ||
+		    res.base != paddr || res.size != size) {
 			pr_err("Illegal SDRAM region for VRAM\n");
 			return;
 		}
 
-		if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
-			pr_err("FB: failed to reserve VRAM\n");
+		if (memblock_is_region_reserved(paddr, size)) {
+			pr_err("FB: failed to reserve VRAM - busy\n");
 			return;
 		}
-	} else {
-		if (size > sdram_size) {
-			pr_err("Illegal SDRAM size for VRAM\n");
+
+		if (memblock_reserve(paddr, size) < 0) {
+			pr_err("FB: failed to reserve VRAM - no memory\n");
 			return;
 		}
-
-		paddr = virt_to_phys(alloc_bootmem_pages(size));
-		BUG_ON(paddr & ~PAGE_MASK);
+	} else {
+		paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
 	}
 
 	omap_vram_add_region(paddr, size);
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index c85dd408a9b..6552751e81a 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -251,7 +251,7 @@ static void p9100_init_fix(struct fb_info *info, int linebytes, struct device_no
 
 static int __devinit p9100_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct p9100_par *par;
 	int linebytes, err;
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index 0f361b6100d..0c69fa20251 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -44,7 +44,7 @@ struct pmagbafb_par {
 };
 
 
-static struct fb_var_screeninfo pmagbafb_defined __initdata = {
+static struct fb_var_screeninfo pmagbafb_defined __devinitdata = {
 	.xres		= 1024,
 	.yres		= 864,
 	.xres_virtual	= 1024,
@@ -68,7 +68,7 @@ static struct fb_var_screeninfo pmagbafb_defined __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_fix_screeninfo pmagbafb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbafb_fix __devinitdata = {
 	.id		= "PMAG-BA",
 	.smem_len	= (1024 * 1024),
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -142,7 +142,7 @@ static void __init pmagbafb_erase_cursor(struct fb_info *info)
 }
 
 
-static int __init pmagbafb_probe(struct device *dev)
+static int __devinit pmagbafb_probe(struct device *dev)
 {
 	struct tc_dev *tdev = to_tc_dev(dev);
 	resource_size_t start, len;
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 2de0806421b..22fcb9a3d5c 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -45,7 +45,7 @@ struct pmagbbfb_par {
 };
 
 
-static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
+static struct fb_var_screeninfo pmagbbfb_defined __devinitdata = {
 	.bits_per_pixel	= 8,
 	.red.length	= 8,
 	.green.length	= 8,
@@ -58,7 +58,7 @@ static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_fix_screeninfo pmagbbfb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbbfb_fix __devinitdata = {
 	.id		= "PMAGB-BA",
 	.smem_len	= (2048 * 1024),
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -148,7 +148,7 @@ static void __init pmagbbfb_erase_cursor(struct fb_info *info)
 /*
  * Set up screen parameters.
  */
-static void __init pmagbbfb_screen_setup(struct fb_info *info)
+static void __devinit pmagbbfb_screen_setup(struct fb_info *info)
 {
 	struct pmagbbfb_par *par = info->par;
 
@@ -180,9 +180,9 @@ static void __init pmagbbfb_screen_setup(struct fb_info *info)
 /*
  * Determine oscillator configuration.
  */
-static void __init pmagbbfb_osc_setup(struct fb_info *info)
+static void __devinit pmagbbfb_osc_setup(struct fb_info *info)
 {
-	static unsigned int pmagbbfb_freqs[] __initdata = {
+	static unsigned int pmagbbfb_freqs[] __devinitdata = {
 		130808, 119843, 104000, 92980, 74370, 72800,
 		69197, 66000, 65000, 50350, 36000, 32000, 25175
 	};
@@ -247,7 +247,7 @@ static void __init pmagbbfb_osc_setup(struct fb_info *info)
 };
 
 
-static int __init pmagbbfb_probe(struct device *dev)
+static int __devinit pmagbbfb_probe(struct device *dev)
 {
 	struct tc_dev *tdev = to_tc_dev(dev);
 	resource_size_t start, len;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index e8c76994481..12c451a711e 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -991,13 +991,13 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		priv->ch[j].lcdc = priv;
 		memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
 
-		error = sh_mobile_lcdc_check_interface(&priv->ch[i]);
+		error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
 		if (error) {
 			dev_err(&pdev->dev, "unsupported interface type\n");
 			goto err1;
 		}
-		init_waitqueue_head(&priv->ch[i].frame_end_wait);
-		init_completion(&priv->ch[i].vsync_completion);
+		init_waitqueue_head(&priv->ch[j].frame_end_wait);
+		init_completion(&priv->ch[j].vsync_completion);
 		priv->ch[j].pan_offset = 0;
 
 		switch (pdata->ch[i].chan) {
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index ef7a7bd8b50..cc039b33d2d 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -365,7 +365,7 @@ static void tcx_unmap_regs(struct of_device *op, struct fb_info *info,
 static int __devinit tcx_probe(struct of_device *op,
 			       const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct fb_info *info;
 	struct tcx_par *par;
 	int linebytes, i, err;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 95896f38792..ef8d9d558fc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -636,6 +636,9 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 	INIT_LIST_HEAD(&vp_dev->virtqueues);
 	spin_lock_init(&vp_dev->lock);
 
+	/* Disable MSI/MSIX to bring device to a known good state. */
+	pci_msi_off(pci_dev);
+
 	/* enable the device */
 	err = pci_enable_device(pci_dev);
 	if (err)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1ca88908723..1475ed6b575 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -119,7 +119,7 @@ static int vring_add_indirect(struct vring_virtqueue *vq,
 
 	desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
 	if (!desc)
-		return vq->vring.num;
+		return -ENOMEM;
 
 	/* Transfer entries from the sg list into the indirect page */
 	for (i = 0; i < out; i++) {
@@ -164,7 +164,8 @@ int virtqueue_add_buf_gfp(struct virtqueue *_vq,
 			  gfp_t gfp)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
-	unsigned int i, avail, head, uninitialized_var(prev);
+	unsigned int i, avail, uninitialized_var(prev);
+	int head;
 
 	START_USE(vq);
 
@@ -174,7 +175,7 @@ int virtqueue_add_buf_gfp(struct virtqueue *_vq,
 	 * buffers, then go indirect. FIXME: tune this threshold */
 	if (vq->indirect && (out + in) > 1 && vq->num_free) {
 		head = vring_add_indirect(vq, sg, out, in, gfp);
-		if (head != vq->vring.num)
+		if (likely(head >= 0))
 			goto add_head;
 	}
 
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 1cddf92cb9a..750bc5281d7 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -346,9 +346,13 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
 	} else {
 		wdt->users = 0;
 	}
-	wdt->miscdev.minor = WATCHDOG_MINOR;
-	wdt->miscdev.name = "watchdog";
-	wdt->miscdev.fops = &at32_wdt_fops;
+
+	wdt->miscdev.minor	= WATCHDOG_MINOR;
+	wdt->miscdev.name	= "watchdog";
+	wdt->miscdev.fops	= &at32_wdt_fops;
+	wdt->miscdev.parent	= &pdev->dev;
+
+	platform_set_drvdata(pdev, wdt);
 
 	if (at32_wdt_settimeout(timeout)) {
 		at32_wdt_settimeout(TIMEOUT_DEFAULT);
@@ -360,17 +364,17 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
 	ret = misc_register(&wdt->miscdev);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-		goto err_iounmap;
+		goto err_register;
 	}
 
-	platform_set_drvdata(pdev, wdt);
-	wdt->miscdev.parent = &pdev->dev;
 	dev_info(&pdev->dev,
 		"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
 		wdt->regs, wdt->timeout, nowayout);
 
 	return 0;
 
+err_register:
+	platform_set_drvdata(pdev, NULL);
 err_iounmap:
 	iounmap(wdt->regs);
 err_free:
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index ca0f4c6cf5a..1df284f9c2a 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -273,7 +273,7 @@ static int __devinit gef_wdt_probe(struct of_device *dev,
 		bus_clk = freq;
 
 	/* Map devices registers into memory */
-	gef_wdt_regs = of_iomap(dev->node, 0);
+	gef_wdt_regs = of_iomap(dev->dev.of_node, 0);
 	if (gef_wdt_regs == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index ea25885781b..2ee7dac55a3 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -330,7 +330,6 @@ static void imx2_wdt_shutdown(struct platform_device *pdev)
 }
 
 static struct platform_driver imx2_wdt_driver = {
-	.probe		= imx2_wdt_probe,
 	.remove		= __exit_p(imx2_wdt_remove),
 	.shutdown	= imx2_wdt_shutdown,
 	.driver		= {
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 6622335773b..4cda64dd309 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -189,7 +189,7 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
 				       const struct of_device_id *match)
 {
 	int ret;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct mpc8xxx_wdt_type *wdt_type = match->data;
 	u32 freq = fsl_get_sys_freq();
 	bool enabled;
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 89dd7b03529..b68d928c8f9 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -284,7 +284,7 @@ static int __devinit wm8350_wdt_probe(struct platform_device *pdev)
 	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
 
 	if (!wm8350) {
-		dev_err(wm8350->dev, "No driver data supplied\n");
+		pr_err("No driver data supplied\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index eab33f1dbdf..7b547f53f65 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -499,7 +499,7 @@ int xenbus_printf(struct xenbus_transaction t,
 #define PRINTF_BUFFER_SIZE 4096
 	char *printf_buffer;
 
-	printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_KERNEL);
+	printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_NOIO | __GFP_HIGH);
 	if (printf_buffer == NULL)
 		return -ENOMEM;
 
diff --git a/firmware/Makefile b/firmware/Makefile
index 6e0dd3e07a0..b27f09f05d1 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -83,6 +83,7 @@ fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
 					 qlogic/12160.bin
 fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index e8e550fa242..ae5f8a47f29 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -858,3 +858,43 @@ Licence:
 Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
+
+Driver: ib_qib - QLogic Infiniband
+
+File: qlogic/sd7220.fw
+
+Licence:
+
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
diff --git a/firmware/qlogic/sd7220.fw.ihex b/firmware/qlogic/sd7220.fw.ihex
new file mode 100644
index 00000000000..a3363631911
--- /dev/null
+++ b/firmware/qlogic/sd7220.fw.ihex
@@ -0,0 +1,513 @@
+:10000000020A29020A87E5E630E6047F0180027FC2
+:1000100000E5E230E4047E0180027E00EE5F6008CD
+:1000200053F9F7E4F5FE80087F0A121731120EA289
+:1000300075FC08E4F5FDE5E720E70343F908220035
+:1000400001201100042000755101E4F552F553F52B
+:1000500052F57E7F04020438C2360552E552D3942D
+:100060000C4005755201D23690070C7407F0A3744A
+:10007000FFF0E4F50CA3F0900714F0A3F0750B204B
+:10008000F509E4F508E508D39430400302040412AE
+:100090000006150BE50870047F0180027F00E5096A
+:1000A00070047E0180027E00EE5F6005121871D23E
+:1000B0003553E1F7E5084509FFE50B25E025E02488
+:1000C00083F582E43407F583EFF085E220E552D32F
+:1000D0009401400D1219F3E054A064407003020330
+:1000E000FB53F9F8909470E4F0E0F510AF09121E9C
+:1000F000B3AF08EF4408F582758380E0F529EF443B
+:1001000007121A3CF5225440D39400401EE52954AE
+:10011000F070211219F3E04480F0E52254306508B4
+:1001200070091219F3E054BFF080091219F37440FA
+:10013000F00203FB121A127583AE74FFF0AF087E53
+:1001400000EF4407F582E0FDE50B25E025E0248182
+:10015000F582E43407F583EDF090070EE004F0EF4C
+:100160004407F582758398E0F528121A23400C1293
+:1001700019F3E04401121A320203F6AF087E00744C
+:1001800080CDEFCD8D82F583E030E00A1219F3E0E7
+:100190004420F00203FB1219F3E054DFF0EE44AE0A
+:1001A000121A4330E4030203FB749E121A0520E086
+:1001B000030203FB8F828E83E020E0030203FB1225
+:1001C00019F3E04410F0E5E320E708E508121A3AD5
+:1001D0004404F0AF087E00EF121A3A20E2341219FC
+:1001E000F3E04408F0E5E430E6047D0180027D00A0
+:1001F000E57EC3940450047C0180027C00EC4D60D9
+:1002000005C2350203FBEE44D2121A434440F00209
+:1002100003FB1219F3E054F7F0121A127583D2E0BF
+:1002200054BFF0900714E004F0E57E7003757E0182
+:10023000AF087E00121A2340121219F3E044011293
+:1002400019F2E05402121A320203FB1219F3E044CD
+:10025000021219F2E054FEF0C235EE448A8F82F5A4
+:1002600083E0F517548F4440F07490FCE508440790
+:10027000FDF5828C83E0543F900702F0E054C08D7E
+:10028000828C83F07492121A05900703121A197463
+:1002900082121A05900704121A1974B4121A0590E2
+:1002A0000705121A197494FEE5084406121A0AF595
+:1002B0001030E004D2378002C237E510547F8F82BD
+:1002C0008E83F0304430121A035480D394004004DB
+:1002D000D2398002C2398F828E83E04480F0121AB4
+:1002E000035440D394004004D23A8002C23A8F8231
+:1002F0008E83E04440F07492FEE5084406121A0A28
+:1003000030E704D2388002C2388F828E83E0547F77
+:10031000F0121E46E4F50A20030280033043031264
+:1003200019952002028003304203120C8F303006F0
+:10033000121995120C8F120D471219F3E054FBF0AD
+:10034000E50AC39401404643E1081219F3E044046E
+:10035000F0E5E420E72A121A127583D2E05408D39C
+:10036000940040047F0180027F00E50AC3940140AD
+:10037000047E0180027E00EF5E6005121DD78017AB
+:10038000121A127583D2E04408F00203FB121A120B
+:100390007583D2E054F7F0121E467F0812173174AD
+:1003A0008EFE121A128E83E0F51054FEF0E5104412
+:1003B00001FFE508FDED4407F582EFF0E51054FE7E
+:1003C000FFED4407F582EF121A11758386E04410A1
+:1003D000121A11E04410F01219F3E054FD4401FF29
+:1003E0001219F3EF121A3230320CE5084408F58284
+:1003F0007583827405F0AF0B1218D774102508F5B9
+:10040000080200850509E509D3940750030200821C
+:10041000E57ED3940040047F0180027F00E57EC327
+:1004200094FA50047E0180027E00EE5F6002057E39
+:1004300030350B43E1017F0912173102005853E1B7
+:10044000FE0200588E6A8F6B8C6C8D6D756E017517
+:100450006F01757001E4F573F574F57590072FF071
+:10046000F53CF53EF546F547F53DF53FF56FE56F93
+:10047000700FE56B456A12072A758380743AF08025
+:100480000912072A758380741AF0E4F56EC3743F6D
+:10049000956EFF120865758382EFF0121A4D1208EF
+:1004A000C6E533F01208FA1208B140E1E56F700BAF
+:1004B00012072A7583807436F0800912072A758323
+:1004C000807416F0756E0112072A7583B4E56EF01C
+:1004D000121A4D743F256EF582E43400F583E5333E
+:1004E000F074BF256EF582E434001208B140D8E400
+:1004F000F570F546F547F56E1208FAF583E0FE1241
+:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F
+:10051000EE9C50047B0180027B00E57070047A0140
+:1005200080027A00EB5A6006856E46757001D3EF43
+:100530009DEE9C50047F0180027F00E570B40104B1
+:100540007E0180027E00EF5E6003856E47056EE5EA
+:100550006E647F70A3E5466005E547B47E0385467B
+:1005600047E56F7008854676854777800EC3747FB0
+:100570009546F578C3747F9547F579E56F7037E553
+:10058000466547700C757301757401F53CF53D8047
+:1005900035E4F54EC3E5479546F53CC313F57125A3
+:1005A00046F572C3943F4005E4F53D8040C3743F77
+:1005B0009572F53D8037E5466547700F7573017597
+:1005C0007501F53EF53F754E018022E4F54EC3E519
+:1005D000479546F53EC313F5712546F572D3943F12
+:1005E0005005E4F53F8006E57224C1F53F056FE54F
+:1005F0006FC39402500302046EE56D456C70028077
+:1006000004E574457590072FF07F01E53E6004E531
+:100610003C7014E4F53CF53DF53EF53F1208D27010
+:1006200004F00206A4807AE53CC3953E4007E53C11
+:10063000953EFF8006C3E53E953CFFE576D3957970
+:10064000400585767A800385797AE577C395785079
+:100650000585777B800385787BE57BD3957A403071
+:10066000E57B957AF53CF53EC3E57B957A900719D5
+:10067000F0E53CC313F571257AF572C3943F40054C
+:10068000E4F53D801FC3743F9572F53DF53F80143E
+:10069000E4F53CF53E900719F01208D27003F080A3
+:1006A000037401F01208657583D0E0540FFEAD3C71
+:1006B00070027E07BE0F027E80EEFBEFD39B74803C
+:1006C000F898401FE4F53CF53E1208D27003F08024
+:1006D000127401F0E508FBEB4407F5827583D2E064
+:1006E0004410F0E508FBEB4409F58275839EEDF0BC
+:1006F000EB4407F5827583CAEDF01208657583CC6B
+:10070000EFF022E5084407F5827583BCE054F0F071
+:10071000E5084407F5827583BEE054F0F0E508442F
+:1007200007F5827583C0E054F0F0E5084407F582D0
+:1007300022F0900728E0FEA3E0F5828E8322854216
+:100740004285414185404074C02FF58274023EF5D8
+:1007500083E542F074E02FF58274023EF58322E5D2
+:100760004229FDE433FCE53CC39DEC6480F87480D1
+:100770009822F583E0900722541FFDE0FAA3E0F5EC
+:10078000828A83EDF022900722E0FCA3E0F5828CC0
+:100790008322900724FFED4407CFF0A3EFF02285DA
+:1007A0003838853939853A3A74C02FF58274023E5B
+:1007B000F58322900726FFED4407CFF0A3EFF02248
+:1007C000F074A02FF58274023EF5832274C02511C7
+:1007D000F582E43401F5832274002511F582E434B6
+:1007E00002F5832274602511F582E43403F5832237
+:1007F00074802511F582E43403F5832274E0251119
+:10080000F582E43403F5832274402511F582E43443
+:1008100006F5832274802FF58274023EF58322AFA1
+:10082000087E00EF4407F58222F583E5824407F550
+:1008300082E540F02274402511F582E43402F5830C
+:100840002274C02511F582E43403F5832274002557
+:1008500011F582E43406F5832274202511F582E433
+:100860003406F58322E508FDED4407F58222E541D3
+:10087000F0E56564014564227E00FB7A00FD7C00A2
+:100880002274202511F582E434022274A02511F58A
+:1008900082E4340322853E42853F418F4022853CDD
+:1008A00042853D418F402275453F900720E4F0A3EB
+:1008B00022F583E532F0056EE56EC3944022F0E543
+:1008C000084406F582227400256EF582E43400F5B2
+:1008D0008322E56D456C90072F22E4F9E53CD39522
+:1008E0003E2274802EF582E43402F583E02274A067
+:1008F0002EF582E43402F583E0227480256EF582C1
+:10090000E43400222542FDE433FC22854242854145
+:100910004185404022ED4C60030209E5EF4E7037FF
+:10092000900726120789E0FD1207CCEDF09007280A
+:10093000120789E0FD1207D8EDF0120786E0541F78
+:10094000FD120881F583EDF0900724120789E05429
+:100950001FFD120835EDF0EF64044E703790072646
+:10096000120789E0FD1207E4EDF0900728120789CD
+:10097000E0FD1207F0EDF0120786E0541FFD1208AB
+:100980008BF583EDF0900724120789E0541FFD12C8
+:100990000841EDF0EF64014E70047D0180027D009E
+:1009A000EF64024E70047F0180027F00EF4D60789B
+:1009B000900726120735E0FF1207FCEF120731E01F
+:1009C000FF120808EFF0900722120735E0541FFFCE
+:1009D00012084DEFF0900724120735E0541FFF1264
+:1009E0000859EFF0221207CCE4F01207D8E4F01215
+:1009F0000881F583E4F01208357414F01207E4E47A
+:100A0000F01207F0E4F012088BF583E4F0120841CD
+:100A10007414F01207FCE4F0120808E4F012084D18
+:100A2000E4F01208597414F02253F9F775FC10E43D
+:100A3000F5FD75FE30F5FFE5E720E70343F908E52E
+:100A4000E620E70B78FFE4F6D8FD53E6FE80097850
+:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837
+:100A6000C2A9D2AFE5E220E50520E602800343E11A
+:100A700002E5E220E00E9000007F007E08E4F0A393
+:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB
+:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A
+:100AA000E053FAFE32021B55E493A3F8E493A3F655
+:100AB00008DFF98029E493A3F85407240CC8C33352
+:100AC000C4540F4420C8834004F456800146F6DF26
+:100AD000E4800B010204081020408090003FE47E77
+:100AE000019360C1A3FF543F30E509541FFEE49316
+:100AF000A360010ECF54C025E060AD40B880FE8CED
+:100B0000648D658A668B67E4F569EF4E7003021D9C
+:100B100055E4F568E5674566703212072A758390DB
+:100B2000E41207297583C2E41207297583C4E4120D
+:100B30000870702912072A758392E41207297583B9
+:100B4000C6E41207297583C8E4F0801190072612C5
+:100B50000735E41208707005120732E4F0121D55D3
+:100B6000121EBFE5674566703312072A758390E54C
+:100B7000411207297583C2E5411207297583C41202
+:100B8000086E702912072A758392E54012072975AD
+:100B900083C6E5401207297583C8800E9007261288
+:100BA000073512086E7006120732E540F0AF697E15
+:100BB00000AD67AC6612044412072A7583CAE0D3FD
+:100BC0009400500C0568E568C394055003020B14AB
+:100BD000228C608D611208DA7420400D2FF582742A
+:100BE000033EF583E53EF0800B2FF58274033EF55E
+:100BF00083E53CF0E53CD3953E403CE561456070C3
+:100C000010E9120904E53E120768403B120895807E
+:100C100018E53EC39538401D853E38E53E600585A4
+:100C20003F3980038539398F3A120814E53E12079F
+:100C3000C0E53FF0228043E5614560701912075F0F
+:100C4000400512089E802712090B120814E5421273
+:100C500007C0E541F022E53CC39538401D853C388E
+:100C6000E53C6005853D3980038539398F3A1208A6
+:100C700014E53C1207C0E53DF02285383885393946
+:100C8000853A3A120814E5381207C0E539F0227F98
+:100C900006121731121D23120E04120E33E0440AFD
+:100CA000F0748EFE120E04120E0BEFF0E52830E504
+:100CB00003D38001C3400575142080037514081206
+:100CC0000E0475838AE514F0B4FF05751280800662
+:100CD000E514C313F512E4F516F57F121936121355
+:100CE000A3E50AC3940150090516E516C394144000
+:100CF000EAE5E420E728120E047583D2E05408D315
+:100D0000940040047F0180027F00E50AC394014003
+:100D1000047E0180027E00EF5E6003121DD7E57F36
+:100D2000C394114014120E047583D2E04480F0E5A0
+:100D3000E420E70F121DD7800A120E047583D2E05B
+:100D4000547FF0121D2322748A850882F583E517EB
+:100D5000F0120E3AE4F0900702E0120E177583903D
+:100D6000EFF07492FEE5084407FFF5828E83E054AD
+:100D7000C0FD900703E0543F4D8F828E83F09007B3
+:100D800004E0120E17758382EFF0900705E0FFED87
+:100D90004407F5827583B4EF120E03758380E05427
+:100DA000BFF030370A120E91758394E04480F03022
+:100DB000380A120E91758392E04480F0E52830E401
+:100DC0001A20390A120E04758388E0547FF0203A05
+:100DD0000A120E04758388E054BFF0748CFE120E64
+:100DE000048E83E0540F120E03758386E054BFF027
+:100DF000E5084406120DFD75838AE4F022F582753C
+:100E00008382E4F0E5084407F582228E83E0F51042
+:100E100054FEF0E5104401FFE508FDED4407F582BE
+:100E200022E515C45407FFE508FDED4408F5827579
+:100E3000838222758380E04440F0E5084408F5820F
+:100E400075838A22E51625E025E024AFF582E43497
+:100E50001AF583E493F50D2243E11043E18053E159
+:100E6000FD85E11022E51625E025E024B2F582E4B7
+:100E7000341AF583E49322855582855483E515F071
+:100E800022E5E25420D3940022E5E25440D39400BA
+:100E900022E5084406F58222FDE508FBEB4407F550
+:100EA000822253F9F775FE3022EF4E70261207CCDE
+:100EB000E0FD90072612077B1207D8E0FD90072877
+:100EC00012077B120881120772120835E09007247E
+:100ED000120778EF64044E70291207E4E0FD9007D2
+:100EE0002612077B1207F0E0FD90072812077B12FD
+:100EF000088B120772120841E0541FFD900724125C
+:100F0000077BEF64014E70047D0180027D00EF6479
+:100F1000024E70047F0180027F00EF4D60351207A2
+:100F2000FCE0FF900726120789EFF0120808E0FFA7
+:100F3000900728120789EFF012084DE0541FFF12A6
+:100F40000786EFF0120859E0541FFF90072412079C
+:100F500089EFF022E4F553120E8140047F018002F4
+:100F60007F00120E8940047E0180027E00EE4F70E9
+:100F700003020FF685E11043E10253E10F85E11012
+:100F8000E4F551E5E3543FF552120E89401DAD5290
+:100F9000AF51121118EF600885E11043E140800B5A
+:100FA00053E1BF120E5812000680FBE5E3543FF5F3
+:100FB00051E5E4543FF552120E81401DAD52AF5140
+:100FC000121118EF600885E11043E120800B53E116
+:100FD000DF120E5812000680FB120E8140047F01C2
+:100FE00080027F00120E8940047E0180027E00EEA6
+:100FF0004F6003120E5B22120E21EFF012109122AD
+:1010000002110002104002109000000000000000D9
+:1010100001200120E4F5571216BD121644E4121007
+:10102000561214B7900726120735E4120731E4F080
+:101030001210561214B7900726120735E541120711
+:1010400031E540F0AF577E00AD567C00120444AF4E
+:10105000567E000211EEFF900720A3E0FDE4F55656
+:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6
+:1010700056F540FEFCAB56FA121541AF567E0012F3
+:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231
+:1010900022E4F555E508FD74A0F556ED4407F55733
+:1010A000E52830E503D38001C340057F28EF8004A5
+:1010B0007F14EFC313F554E4F9120E1875838EE014
+:1010C000F510CEEFCEEED394004026E51054FE127C
+:1010D0000E9875838EEDF0E5104401FDEB4407F5A5
+:1010E00082EDF0855782855683E030E301091E804A
+:1010F000D4C234E9C395544002D2342202000622FD
+:10110000303011901000E493F510901010E493F536
+:101110001012109012115022E4FCC3ED9FFAEFF56B
+:101120008375820079FFE493CC6CCCA3D9F8DAF60E
+:10113000E5E230E4028CE5ED24FFFFEF7582FFF578
+:1011400083E4936C70037F01227F00222211000050
+:10115000228E588F598C5A8D5B8A5C8B5D755E012F
+:10116000E4F55FF560F56212072A7583D0E0FFC4ED
+:10117000540FF561121EA585595ED3E55E955BE5BA
+:101180005A12076B504B1207037583BCE0455E1281
+:1011900007297583BEE0455E1207297583C0E045C7
+:1011A0005EF0AF5FE560120878120AFFAF627E0062
+:1011B000AD5DAC5C120444E561AF5E7E00B4030536
+:1011C000121E218007AD5DAC5C121317055E021183
+:1011D0007A1207037583BCE045401207297583BE68
+:1011E000E045401207297583C0E04540F0228E5843
+:1011F0008F59755A017901755B01E4FB12072A7555
+:1012000083AEE0541AFF120865E0C4135407FEEFE2
+:10121000700CEE6535700790072FE0B4010DAF3507
+:101220007E00120EA9CFEBCF021E60E55964024585
+:101230005870047F0180027F00E559455870047E94
+:101240000180027E00EE4F602385414985404BE5D9
+:10125000594558702CAF5AFECDE9CDFCAB59AA5870
+:10126000120AFFAF5B7E00121E608015AF5B7E002E
+:10127000121E60900726120735E549120731E54B2B
+:10128000F0E4FDAF35FEFC120915228C648D651269
+:1012900008DA403CE56545647010120904C3E53E78
+:1012A000120769403B1208958018E53EC395384007
+:1012B0001D853E38E53E6005853F39800385393917
+:1012C0008F3A1207A8E53E120753E53FF022803B14
+:1012D000E5654564701112075F400512089E801F86
+:1012E00012073EE541F022E53CC39538401D853CA0
+:1012F00038E53C6005853D3980038539398F3A12E0
+:1013000007A8E53C120753E53DF02212079FE53898
+:10131000120753E539F0228C638D641208DA403CE1
+:10132000E56445637010120904C3E53E1207694085
+:101330003B1208958018E53EC39538401D853E3820
+:10134000E53E6005853F3980038539398F3A1207BC
+:10135000A8E53E120753E53FF022803BE564456374
+:10136000701112075F400512089E801F12073EE5AC
+:1013700041F022E53CC39538401D853C38E53C6092
+:1013800005853D3980038539398F3A1207A8E53C38
+:10139000120753E53DF02212079FE538120753E587
+:1013A00039F022E50DFEE5088E544405F555751516
+:1013B0000FF582120E7A1217A320310575150380DE
+:1013C0000375150BE50AC39401503812142020311F
+:1013D0000605150515800415151515E50AC39401B4
+:1013E0005021121420203104051580021515E50A3C
+:1013F000C39401500E120E771217A3203105051564
+:10140000120E77E515B408047F0180027F00E51510
+:10141000B407047E0180027E00EE4F6002057F2249
+:10142000855582855483E515F01217A32212072AE9
+:101430007583AE74FF120729E0541AF534E0C41323
+:101440005407F53524FE602424FE603C24047063B8
+:1014500075312DE508FD74B612079274BC90072211
+:1014600012079574901207B37492803C75313AE577
+:1014700008FD74BA12079274C09007221207B6745E
+:10148000C41207B374C88020753135E508FD74B8FF
+:1014900012079274BEFFED4407900722CFF0A3EF2E
+:1014A000F074C21207B374C6FFED4407A3CFF0A3D4
+:1014B000EFF022753401228E588F598C5A8D5B8A39
+:1014C0005C8B5D755E01E4F55F121EA585595ED3E8
+:1014D000E55E955BE55A12076B5057E55D455C701C
+:1014E0003012072A758392E55E1207297583C6E5D7
+:1014F0005E1207297583C8E55E120729758390E59A
+:101500005E1207297583C2E55E1207297583C480C0
+:1015100003120732E55EF0AF5F7E00AD5DAC5C129A
+:101520000444AF5E7E00AD5DAC5C120BD1055E0283
+:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81
+:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7
+:1015500062F563121EA58F60D3E560955DE55C12B0
+:10156000076B5061E55F455E702712072A7583B6E9
+:10157000E5601207297583B8E5601207297583BAFB
+:10158000E560F0AF617E00E56212087A120AFF8022
+:1015900019900724120735E56012072975838EE438
+:1015A0001207297401120729E4F0AF637E00AD5FD2
+:1015B000AC5E120444AF607E00AD5FAC5E12128B75
+:1015C00005600215582290114DE49390072EF012F9
+:1015D000081F7583AEE0541AF5347067EF4407F5C1
+:1015E000827583CEE0FF1313135407F536540FD3DF
+:1015F0009400400612142D121BA9E536540F24FE48
+:10160000600C14600C146019240370378010021EE3
+:1016100091121E9112072A7583CEE054EFF0021D3D
+:10162000AE121014E4F555121D850555E555C39409
+:101630000540F412072A7583CEE054C7120729E04B
+:101640004408F022E4F558F559AF08EF4407F58255
+:101650007583D0E0FDC4540FF55AEF4407F5827549
+:1016600083807401F0120821758382E545F0EF4410
+:1016700007F58275838A74FFF0121A4D12072A75D6
+:1016800083BCE054EF1207297583BEE054EF1207C4
+:10169000297583C0E054EF1207297583BCE044101C
+:1016A0001207297583BEE044101207297583C0E034
+:1016B0004410F0AF58E559120878020AFFE4F558D3
+:1016C0007D01F559AF35FEFC12091512072A758305
+:1016D000B674101207297583B87410120729758320
+:1016E000BA74101207297583BC7410120729758308
+:1016F000BE74101207297583C074101207297583F0
+:1017000090E41207297583C2E41207297583C4E4A3
+:10171000120729758392E41207297583C6E412071C
+:10172000297583C8E4F0AF58FEE55912087A020A19
+:10173000FFE5E230E46CE5E754C064407064E5091D
+:10174000C45430FEE50825E025E054C04EFEEF54B9
+:101750003F4EFDE52BAE2A7802C333CE33CED8F907
+:10176000F5828E83EDF0E52BAE2A7802C333CE33BB
+:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB
+:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2
+:10179000E52B94FAE52A94005008052BE52B7002FE
+:1017A000052A22E4FFE4F558F556F5577482FC1239
+:1017B0000E048C83E0F510547FF0E5104480120E87
+:1017C00098EDF07E0A120E047583A0E020E026DE7C
+:1017D000F40557E55770020556E5142401FDE4337E
+:1017E000FCD3E5579DE5569C40D9E50A942050026C
+:1017F000050A43E108C231120E047583A6E05512B2
+:1018000065127003D23122C23122900726E0FAA37A
+:10181000E0F5828A83E0F541E539C395414026E54C
+:10182000399541C39FEE12076B40047C0180027C16
+:1018300000E541643F60047B0180027B00EC5B605B
+:101840002905418028C3E5419539C39FEE12076BF6
+:1018500040047F0180027F00E54160047E01800238
+:101860007E00EF5E600415418003853941853A4072
+:1018700022E5E230E460E5E130E25BE50970047FF7
+:101880000180027F00E50870047E0180027E00EE88
+:101890005F604353F9F8E5E230E43BE5E130E22EE6
+:1018A00043FA0253FAFBE4F510909470E510F0E56A
+:1018B000E130E2E7909470E06510600343FA0405BC
+:1018C00010909470E510F070E612000680E153FA73
+:1018D000FD53FAFB80C0228F54120006E5E130E090
+:1018E000047F0180027F00E57ED3940540047E01E1
+:1018F00080027E00EE4F603D855411E5E220E1322A
+:1019000074CE121A0530E7047D0180027D008F82BB
+:101910008E83E030E6047F0180027F00EF5D70156A
+:101920001215C674CE121A0530E607E04480F04363
+:10193000F98012187122120E44E51625E025E024E4
+:10194000B0F582E4341AF583E493F50FE51625E04B
+:1019500025E024B1F582E4341AF583E493F50E1200
+:101960000E65F510E50F54F0120E1775838CEFF02D
+:10197000E50F30E00C120E04758386E04440F080E1
+:101980000A120E04758386E054BFF0120E9175831F
+:1019900082E50EF0227F05121731120E04120E336B
+:1019A0007402F0748EFE120E04120E0BEFF0751519
+:1019B00070120FF72034057515108003751550123D
+:1019C0000FF72034047410800274F02515F51512F9
+:1019D0000E21EFF0121091203417E5156430600CE1
+:1019E00074102515F515B48003E4F515120E21EFDA
+:1019F000F022F0E50B25E025E02482F582E43407AF
+:101A0000F583227488FEE5084407FFF5828E83E0A3
+:101A100022F0E5084407F58222F0E054C08F828E60
+:101A200083F022EF4407F582758386E05410D39447
+:101A30000022F0900715E004F0224406F582758339
+:101A40009EE022FEEF4407F5828E83E022E49007B9
+:101A50002AF0A3F012072A758382E0547F12072927
+:101A6000E04480F01210FC12081F7583A0E020E013
+:101A70001A90072BE004F0700690072AE004F0901B
+:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA
+:101A90004407F5828C83E0F532EE44A8FEEF44075C
+:101AA000F5828E83E0F5332201201100042000909E
+:101AB00000200F9200210F9400220F9600230F9810
+:101AC00000240F9A00250F9C00260F9E00270FA0D0
+:101AD000012001A2012101A4012201A6012301A8E4
+:101AE000012401AA012501AC012601AE012701B0A4
+:101AF000012801B400280FB640280FB8612801CB97
+:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D
+:101B10008274B6120829E508F58274B8120829E51E
+:101B200008F58274BA1208297E007C00120AFF8030
+:101B300012900726120735E541F090072412073569
+:101B4000E540F012072A75838EE41207297401120A
+:101B50000729E4F022E4F526F52753E1FEF52A757E
+:101B60002B01F5087F0112173130301C901AA9E4BF
+:101B700093F510901FF9E493F510900041E493F56C
+:101B800010901ECAE493F5107F02121731120F5401
+:101B90007F03121731120006E5E230E70912100048
+:101BA00030300312110002004712081F7583D0E085
+:101BB000C4540FFD7543017544FF1208AA7404F064
+:101BC000753B01ED14600C14600B14600F2403705E
+:101BD0000B800980001208A704F080061208A77481
+:101BE00004F0EE4482FEEF4407F5828E83E5451251
+:101BF00008BE758382E531F002114C8E608F611250
+:101C00001EA5E4FFCEEDCEEED39561E56012076B25
+:101C1000403974202EF582E43403F583E07003FF2D
+:101C200080261208E2FDC39F401ECFEDCFEB4A7025
+:101C30000B8D421208EEF5418E40800C1208E2F541
+:101C4000381208EEF5398E3A1E80BC22755801E52F
+:101C500035700C1207CCE0F54A1207D8E0F54CE5D8
+:101C600035B4040C1207E4E0F54A1207F0E0F54C35
+:101C7000E535B401047F0180027F00E535B402043C
+:101C80007E0180027E00EE4F600C1207FCE0F54AF8
+:101C9000120808E0F54C85414985404B22755B01EF
+:101CA000900724120735E0541FFFD3940250048F8D
+:101CB000588005EF24FEF558EFC394184005755978
+:101CC000188004EF04F55985435AAF587E00AD598A
+:101CD0007C00AB5B7A00121541AF5A7E0012180AE5
+:101CE000AF5B7E00021AFFE5E230E70E121003C27E
+:101CF000303030031210FF203328E5E730E70512BB
+:101D00000EA2800DE5FEC394205006120EA243F9E8
+:101D100008E5F230E70353F97FE5F15470D39400FE
+:101D200050D822120E04758380E4F0E508440712AF
+:101D30000DFD758384120E02758386120E02758363
+:101D40008CE054F3120E0375838E120E0275839489
+:101D5000E054FBF02212072A75838EE412072974DF
+:101D600001120729E41208BE75838CE04420120892
+:101D7000BEE054DFF07484850882F583E0547FF080
+:101D8000E04480F022755601E4FDF557AF35FEFCC6
+:101D9000120915121C9D121E7A121C4CAF577E00A0
+:101DA000AD567C00120444AF567E000211EE75560B
+:101DB00001E4FDF557AF35FEFC120915121C9D120A
+:101DC0001E7A121C4CAF577E00AD567C00120444A4
+:101DD000AF567E000211EEE4F516120E44FEE50841
+:101DE0004405FF120E658F828E83F00516E516C33B
+:101DF000941440E6E508120E2BE4F022E4F558F5C1
+:101E000059F55AFFFEAD58FC1209157F047E00AD4E
+:101E1000587C001209157F027E00AD587C00020933
+:101E200015E53C253EFCE5422400FBE433FAECC317
+:101E30009BEA12076B400B8C42E53D253FF5418F35
+:101E4000402212090B227484F5188508198519821D
+:101E5000851883E0547FF0E04480F0E04480F02275
+:101E6000EF4E700B12072A7583D2E054DFF0221276
+:101E7000072A7583D2E04420F02275580190072686
+:101E8000120735E0543FF541120732E0543FF54068
+:101E900022755602E4F557121DFCAF577E00AD5671
+:101EA0007C00020444E4F542F541F540F538F5398B
+:101EB000F53A22EF5407FFE5F954F84FF5F9227F80
+:101EC00001E4FE0F0EBEFFFB2201200001042000F2
+:101ED0000000000000000000000000000000000002
+:101EE00000000000000000000000000000000000F2
+:101EF00000000000000000000000000000000000E2
+:101F000000000000000000000000000000000000D1
+:101F100000000000000000000000000000000000C1
+:101F200000000000000000000000000000000000B1
+:101F300000000000000000000000000000000000A1
+:101F40000000000000000000000000000000000091
+:101F50000000000000000000000000000000000081
+:101F60000000000000000000000000000000000071
+:101F70000000000000000000000000000000000061
+:101F80000000000000000000000000000000000051
+:101F90000000000000000000000000000000000041
+:101FA0000000000000000000000000000000000031
+:101FB0000000000000000000000000000000000021
+:101FC0000000000000000000000000000000000011
+:101FD0000000000000000000000000000000000001
+:101FE00000000000000000000000000000000000F1
+:101FF000000000000000000001201100042000810A
+:00000001FF
diff --git a/fs/9p/Makefile b/fs/9p/Makefile
index 1a940ec7af6..91fba025fcb 100644
--- a/fs/9p/Makefile
+++ b/fs/9p/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_9P_FS) := 9p.o
 	vfs_dir.o \
 	vfs_dentry.o \
 	v9fs.o \
-	fid.o
+	fid.o  \
+	xattr.o \
+	xattr_user.o
 
 9p-$(CONFIG_9P_FSCACHE) += cache.o
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index 7317b39b281..35856368906 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -97,6 +97,34 @@ static struct p9_fid *v9fs_fid_find(struct dentry *dentry, u32 uid, int any)
 	return ret;
 }
 
+/*
+ * We need to hold v9ses->rename_sem as long as we hold references
+ * to returned path array. Array element contain pointers to
+ * dentry names.
+ */
+static int build_path_from_dentry(struct v9fs_session_info *v9ses,
+				  struct dentry *dentry, char ***names)
+{
+	int n = 0, i;
+	char **wnames;
+	struct dentry *ds;
+
+	for (ds = dentry; !IS_ROOT(ds); ds = ds->d_parent)
+		n++;
+
+	wnames = kmalloc(sizeof(char *) * n, GFP_KERNEL);
+	if (!wnames)
+		goto err_out;
+
+	for (ds = dentry, i = (n-1); i >= 0; i--, ds = ds->d_parent)
+		wnames[i] = (char  *)ds->d_name.name;
+
+	*names = wnames;
+	return n;
+err_out:
+	return -ENOMEM;
+}
+
 /**
  * v9fs_fid_lookup - lookup for a fid, try to walk if not found
  * @dentry: dentry to look for fid in
@@ -112,7 +140,7 @@ struct p9_fid *v9fs_fid_lookup(struct dentry *dentry)
 	int i, n, l, clone, any, access;
 	u32 uid;
 	struct p9_fid *fid, *old_fid = NULL;
-	struct dentry *d, *ds;
+	struct dentry *ds;
 	struct v9fs_session_info *v9ses;
 	char **wnames, *uname;
 
@@ -139,49 +167,62 @@ struct p9_fid *v9fs_fid_lookup(struct dentry *dentry)
 	fid = v9fs_fid_find(dentry, uid, any);
 	if (fid)
 		return fid;
-
+	/*
+	 * we don't have a matching fid. To do a TWALK we need
+	 * parent fid. We need to prevent rename when we want to
+	 * look at the parent.
+	 */
+	down_read(&v9ses->rename_sem);
 	ds = dentry->d_parent;
 	fid = v9fs_fid_find(ds, uid, any);
-	if (!fid) { /* walk from the root */
-		n = 0;
-		for (ds = dentry; !IS_ROOT(ds); ds = ds->d_parent)
-			n++;
+	if (fid) {
+		/* Found the parent fid do a lookup with that */
+		fid = p9_client_walk(fid, 1, (char **)&dentry->d_name.name, 1);
+		goto fid_out;
+	}
+	up_read(&v9ses->rename_sem);
 
-		fid = v9fs_fid_find(ds, uid, any);
-		if (!fid) { /* the user is not attached to the fs yet */
-			if (access == V9FS_ACCESS_SINGLE)
-				return ERR_PTR(-EPERM);
+	/* start from the root and try to do a lookup */
+	fid = v9fs_fid_find(dentry->d_sb->s_root, uid, any);
+	if (!fid) {
+		/* the user is not attached to the fs yet */
+		if (access == V9FS_ACCESS_SINGLE)
+			return ERR_PTR(-EPERM);
 
-			if (v9fs_proto_dotu(v9ses))
+		if (v9fs_proto_dotu(v9ses) || v9fs_proto_dotl(v9ses))
 				uname = NULL;
-			else
-				uname = v9ses->uname;
+		else
+			uname = v9ses->uname;
 
-			fid = p9_client_attach(v9ses->clnt, NULL, uname, uid,
-				v9ses->aname);
-
-			if (IS_ERR(fid))
-				return fid;
-
-			v9fs_fid_add(ds, fid);
-		}
-	} else /* walk from the parent */
-		n = 1;
+		fid = p9_client_attach(v9ses->clnt, NULL, uname, uid,
+				       v9ses->aname);
+		if (IS_ERR(fid))
+			return fid;
 
-	if (ds == dentry)
+		v9fs_fid_add(dentry->d_sb->s_root, fid);
+	}
+	/* If we are root ourself just return that */
+	if (dentry->d_sb->s_root == dentry)
 		return fid;
-
-	wnames = kmalloc(sizeof(char *) * n, GFP_KERNEL);
-	if (!wnames)
-		return ERR_PTR(-ENOMEM);
-
-	for (d = dentry, i = (n-1); i >= 0; i--, d = d->d_parent)
-		wnames[i] = (char *) d->d_name.name;
-
+	/*
+	 * Do a multipath walk with attached root.
+	 * When walking parent we need to make sure we
+	 * don't have a parallel rename happening
+	 */
+	down_read(&v9ses->rename_sem);
+	n  = build_path_from_dentry(v9ses, dentry, &wnames);
+	if (n < 0) {
+		fid = ERR_PTR(n);
+		goto err_out;
+	}
 	clone = 1;
 	i = 0;
 	while (i < n) {
 		l = min(n - i, P9_MAXWELEM);
+		/*
+		 * We need to hold rename lock when doing a multipath
+		 * walk to ensure none of the patch component change
+		 */
 		fid = p9_client_walk(fid, l, &wnames[i], clone);
 		if (IS_ERR(fid)) {
 			if (old_fid) {
@@ -193,15 +234,17 @@ struct p9_fid *v9fs_fid_lookup(struct dentry *dentry)
 				p9_client_clunk(old_fid);
 			}
 			kfree(wnames);
-			return fid;
+			goto err_out;
 		}
 		old_fid = fid;
 		i += l;
 		clone = 0;
 	}
-
 	kfree(wnames);
+fid_out:
 	v9fs_fid_add(dentry, fid);
+err_out:
+	up_read(&v9ses->rename_sem);
 	return fid;
 }
 
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index f8b86e92cd6..38dc0e06759 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -237,6 +237,7 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses,
 		__putname(v9ses->uname);
 		return ERR_PTR(-ENOMEM);
 	}
+	init_rwsem(&v9ses->rename_sem);
 
 	rc = bdi_setup_and_register(&v9ses->bdi, "9p", BDI_CAP_MAP_COPY);
 	if (rc) {
@@ -278,7 +279,7 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses,
 	v9ses->maxdata = v9ses->clnt->msize - P9_IOHDRSZ;
 
 	/* for legacy mode, fall back to V9FS_ACCESS_ANY */
-	if (!v9fs_proto_dotu(v9ses) &&
+	if (!(v9fs_proto_dotu(v9ses) || v9fs_proto_dotl(v9ses)) &&
 		((v9ses->flags&V9FS_ACCESS_MASK) == V9FS_ACCESS_USER)) {
 
 		v9ses->flags &= ~V9FS_ACCESS_MASK;
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index bec4d0bcb45..4c963c9fc41 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -104,6 +104,7 @@ struct v9fs_session_info {
 	struct p9_client *clnt;	/* 9p client */
 	struct list_head slist; /* list of sessions registered with v9fs */
 	struct backing_dev_info bdi;
+	struct rw_semaphore rename_sem;
 };
 
 struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 32ef4009d03..f47c6bbb01b 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -55,6 +55,7 @@ struct inode *v9fs_get_inode(struct super_block *sb, int mode);
 void v9fs_clear_inode(struct inode *inode);
 ino_t v9fs_qid2ino(struct p9_qid *qid);
 void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
+void v9fs_stat2inode_dotl(struct p9_stat_dotl *, struct inode *);
 int v9fs_dir_release(struct inode *inode, struct file *filp);
 int v9fs_file_open(struct inode *inode, struct file *file);
 void v9fs_inode2stat(struct inode *inode, struct p9_wstat *stat);
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index d61e3b28ce3..16c8a2a98c1 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -87,29 +87,19 @@ static void p9stat_init(struct p9_wstat *stbuf)
 }
 
 /**
- * v9fs_dir_readdir - read a directory
+ * v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
  * @filp: opened file structure
- * @dirent: directory structure ???
- * @filldir: function to populate directory structure ???
+ * @buflen: Length in bytes of buffer to allocate
  *
  */
 
-static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
+static int v9fs_alloc_rdir_buf(struct file *filp, int buflen)
 {
-	int over;
-	struct p9_wstat st;
-	int err = 0;
-	struct p9_fid *fid;
-	int buflen;
-	int reclen = 0;
 	struct p9_rdir *rdir;
+	struct p9_fid *fid;
+	int err = 0;
 
-	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
 	fid = filp->private_data;
-
-	buflen = fid->clnt->msize - P9_IOHDRSZ;
-
-	/* allocate rdir on demand */
 	if (!fid->rdir) {
 		rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL);
 
@@ -128,6 +118,36 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
 		spin_unlock(&filp->f_dentry->d_lock);
 		kfree(rdir);
 	}
+exit:
+	return err;
+}
+
+/**
+ * v9fs_dir_readdir - read a directory
+ * @filp: opened file structure
+ * @dirent: directory structure ???
+ * @filldir: function to populate directory structure ???
+ *
+ */
+
+static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+	int over;
+	struct p9_wstat st;
+	int err = 0;
+	struct p9_fid *fid;
+	int buflen;
+	int reclen = 0;
+	struct p9_rdir *rdir;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
+	fid = filp->private_data;
+
+	buflen = fid->clnt->msize - P9_IOHDRSZ;
+
+	err = v9fs_alloc_rdir_buf(filp, buflen);
+	if (err)
+		goto exit;
 	rdir = (struct p9_rdir *) fid->rdir;
 
 	err = mutex_lock_interruptible(&rdir->mutex);
@@ -146,7 +166,7 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
 		while (rdir->head < rdir->tail) {
 			p9stat_init(&st);
 			err = p9stat_read(rdir->buf + rdir->head,
-						buflen - rdir->head, &st,
+						rdir->tail - rdir->head, &st,
 						fid->clnt->proto_version);
 			if (err) {
 				P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
@@ -176,6 +196,88 @@ exit:
 	return err;
 }
 
+/**
+ * v9fs_dir_readdir_dotl - read a directory
+ * @filp: opened file structure
+ * @dirent: buffer to fill dirent structures
+ * @filldir: function to populate dirent structures
+ *
+ */
+static int v9fs_dir_readdir_dotl(struct file *filp, void *dirent,
+						filldir_t filldir)
+{
+	int over;
+	int err = 0;
+	struct p9_fid *fid;
+	int buflen;
+	struct p9_rdir *rdir;
+	struct p9_dirent curdirent;
+	u64 oldoffset = 0;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
+	fid = filp->private_data;
+
+	buflen = fid->clnt->msize - P9_READDIRHDRSZ;
+
+	err = v9fs_alloc_rdir_buf(filp, buflen);
+	if (err)
+		goto exit;
+	rdir = (struct p9_rdir *) fid->rdir;
+
+	err = mutex_lock_interruptible(&rdir->mutex);
+	if (err)
+		return err;
+
+	while (err == 0) {
+		if (rdir->tail == rdir->head) {
+			err = p9_client_readdir(fid, rdir->buf, buflen,
+								filp->f_pos);
+			if (err <= 0)
+				goto unlock_and_exit;
+
+			rdir->head = 0;
+			rdir->tail = err;
+		}
+
+		while (rdir->head < rdir->tail) {
+
+			err = p9dirent_read(rdir->buf + rdir->head,
+						buflen - rdir->head, &curdirent,
+						fid->clnt->proto_version);
+			if (err < 0) {
+				P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
+				err = -EIO;
+				goto unlock_and_exit;
+			}
+
+			/* d_off in dirent structure tracks the offset into
+			 * the next dirent in the dir. However, filldir()
+			 * expects offset into the current dirent. Hence
+			 * while calling filldir send the offset from the
+			 * previous dirent structure.
+			 */
+			over = filldir(dirent, curdirent.d_name,
+					strlen(curdirent.d_name),
+					oldoffset, v9fs_qid2ino(&curdirent.qid),
+					curdirent.d_type);
+			oldoffset = curdirent.d_off;
+
+			if (over) {
+				err = 0;
+				goto unlock_and_exit;
+			}
+
+			filp->f_pos = curdirent.d_off;
+			rdir->head += err;
+		}
+	}
+
+unlock_and_exit:
+	mutex_unlock(&rdir->mutex);
+exit:
+	return err;
+}
+
 
 /**
  * v9fs_dir_release - close a directory
@@ -207,7 +309,7 @@ const struct file_operations v9fs_dir_operations = {
 const struct file_operations v9fs_dir_operations_dotl = {
 	.read = generic_read_dir,
 	.llseek = generic_file_llseek,
-	.readdir = v9fs_dir_readdir,
+	.readdir = v9fs_dir_readdir_dotl,
 	.open = v9fs_file_open,
 	.release = v9fs_dir_release,
 };
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 2bedc6c94fc..e97c92bd6f1 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -59,9 +59,13 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 	struct p9_fid *fid;
 	int omode;
 
-	P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p \n", inode, file);
+	P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p\n", inode, file);
 	v9ses = v9fs_inode2v9ses(inode);
-	omode = v9fs_uflags2omode(file->f_flags, v9fs_proto_dotu(v9ses));
+	if (v9fs_proto_dotl(v9ses))
+		omode = file->f_flags;
+	else
+		omode = v9fs_uflags2omode(file->f_flags,
+					v9fs_proto_dotu(v9ses));
 	fid = file->private_data;
 	if (!fid) {
 		fid = v9fs_fid_clone(file->f_path.dentry);
@@ -73,11 +77,12 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 			p9_client_clunk(fid);
 			return err;
 		}
-		if (omode & P9_OTRUNC) {
+		if (file->f_flags & O_TRUNC) {
 			i_size_write(inode, 0);
 			inode->i_blocks = 0;
 		}
-		if ((file->f_flags & O_APPEND) && (!v9fs_proto_dotu(v9ses)))
+		if ((file->f_flags & O_APPEND) &&
+			(!v9fs_proto_dotu(v9ses) && !v9fs_proto_dotl(v9ses)))
 			generic_file_llseek(file, 0, SEEK_END);
 	}
 
@@ -139,7 +144,7 @@ ssize_t
 v9fs_file_readn(struct file *filp, char *data, char __user *udata, u32 count,
 	       u64 offset)
 {
-	int n, total;
+	int n, total, size;
 	struct p9_fid *fid = filp->private_data;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "fid %d offset %llu count %d\n", fid->fid,
@@ -147,6 +152,7 @@ v9fs_file_readn(struct file *filp, char *data, char __user *udata, u32 count,
 
 	n = 0;
 	total = 0;
+	size = fid->iounit ? fid->iounit : fid->clnt->msize - P9_IOHDRSZ;
 	do {
 		n = p9_client_read(fid, data, udata, offset, count);
 		if (n <= 0)
@@ -160,7 +166,7 @@ v9fs_file_readn(struct file *filp, char *data, char __user *udata, u32 count,
 		offset += n;
 		count -= n;
 		total += n;
-	} while (count > 0 && n == (fid->clnt->msize - P9_IOHDRSZ));
+	} while (count > 0 && n == size);
 
 	if (n < 0)
 		total = n;
@@ -183,11 +189,13 @@ v9fs_file_read(struct file *filp, char __user *udata, size_t count,
 {
 	int ret;
 	struct p9_fid *fid;
+	size_t size;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "count %zu offset %lld\n", count, *offset);
 	fid = filp->private_data;
 
-	if (count > (fid->clnt->msize - P9_IOHDRSZ))
+	size = fid->iounit ? fid->iounit : fid->clnt->msize - P9_IOHDRSZ;
+	if (count > size)
 		ret = v9fs_file_readn(filp, NULL, udata, count, *offset);
 	else
 		ret = p9_client_read(fid, NULL, udata, *offset, count);
@@ -224,9 +232,7 @@ v9fs_file_write(struct file *filp, const char __user * data,
 	fid = filp->private_data;
 	clnt = fid->clnt;
 
-	rsize = fid->iounit;
-	if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
-		rsize = clnt->msize - P9_IOHDRSZ;
+	rsize = fid->iounit ? fid->iounit : clnt->msize - P9_IOHDRSZ;
 
 	do {
 		if (count < rsize)
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 4331b3b5ee1..6e94f3247ce 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -35,6 +35,7 @@
 #include <linux/idr.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/xattr.h>
 #include <net/9p/9p.h>
 #include <net/9p/client.h>
 
@@ -42,6 +43,7 @@
 #include "v9fs_vfs.h"
 #include "fid.h"
 #include "cache.h"
+#include "xattr.h"
 
 static const struct inode_operations v9fs_dir_inode_operations;
 static const struct inode_operations v9fs_dir_inode_operations_dotu;
@@ -236,6 +238,41 @@ void v9fs_destroy_inode(struct inode *inode)
 #endif
 
 /**
+ * v9fs_get_fsgid_for_create - Helper function to get the gid for creating a
+ * new file system object. This checks the S_ISGID to determine the owning
+ * group of the new file system object.
+ */
+
+static gid_t v9fs_get_fsgid_for_create(struct inode *dir_inode)
+{
+	BUG_ON(dir_inode == NULL);
+
+	if (dir_inode->i_mode & S_ISGID) {
+		/* set_gid bit is set.*/
+		return dir_inode->i_gid;
+	}
+	return current_fsgid();
+}
+
+/**
+ * v9fs_dentry_from_dir_inode - helper function to get the dentry from
+ * dir inode.
+ *
+ */
+
+static struct dentry *v9fs_dentry_from_dir_inode(struct inode *inode)
+{
+	struct dentry *dentry;
+
+	spin_lock(&dcache_lock);
+	/* Directory should have only one entry. */
+	BUG_ON(S_ISDIR(inode->i_mode) && !list_is_singular(&inode->i_dentry));
+	dentry = list_entry(inode->i_dentry.next, struct dentry, d_alias);
+	spin_unlock(&dcache_lock);
+	return dentry;
+}
+
+/**
  * v9fs_get_inode - helper function to setup an inode
  * @sb: superblock
  * @mode: mode to setup inode with
@@ -267,7 +304,13 @@ struct inode *v9fs_get_inode(struct super_block *sb, int mode)
 	case S_IFBLK:
 	case S_IFCHR:
 	case S_IFSOCK:
-		if (!v9fs_proto_dotu(v9ses)) {
+		if (v9fs_proto_dotl(v9ses)) {
+			inode->i_op = &v9fs_file_inode_operations_dotl;
+			inode->i_fop = &v9fs_file_operations_dotl;
+		} else if (v9fs_proto_dotu(v9ses)) {
+			inode->i_op = &v9fs_file_inode_operations;
+			inode->i_fop = &v9fs_file_operations;
+		} else {
 			P9_DPRINTK(P9_DEBUG_ERROR,
 				   "special files without extended mode\n");
 			err = -EINVAL;
@@ -396,23 +439,14 @@ void v9fs_clear_inode(struct inode *inode)
 #endif
 }
 
-/**
- * v9fs_inode_from_fid - populate an inode by issuing a attribute request
- * @v9ses: session information
- * @fid: fid to issue attribute request for
- * @sb: superblock on which to create inode
- *
- */
-
 static struct inode *
-v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+v9fs_inode(struct v9fs_session_info *v9ses, struct p9_fid *fid,
 	struct super_block *sb)
 {
 	int err, umode;
-	struct inode *ret;
+	struct inode *ret = NULL;
 	struct p9_wstat *st;
 
-	ret = NULL;
 	st = p9_client_stat(fid);
 	if (IS_ERR(st))
 		return ERR_CAST(st);
@@ -433,15 +467,62 @@ v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
 #endif
 	p9stat_free(st);
 	kfree(st);
-
 	return ret;
-
 error:
 	p9stat_free(st);
 	kfree(st);
 	return ERR_PTR(err);
 }
 
+static struct inode *
+v9fs_inode_dotl(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+	struct super_block *sb)
+{
+	struct inode *ret = NULL;
+	int err;
+	struct p9_stat_dotl *st;
+
+	st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+	if (IS_ERR(st))
+		return ERR_CAST(st);
+
+	ret = v9fs_get_inode(sb, st->st_mode);
+	if (IS_ERR(ret)) {
+		err = PTR_ERR(ret);
+		goto error;
+	}
+
+	v9fs_stat2inode_dotl(st, ret);
+	ret->i_ino = v9fs_qid2ino(&st->qid);
+#ifdef CONFIG_9P_FSCACHE
+	v9fs_vcookie_set_qid(ret, &st->qid);
+	v9fs_cache_inode_get_cookie(ret);
+#endif
+	kfree(st);
+	return ret;
+error:
+	kfree(st);
+	return ERR_PTR(err);
+}
+
+/**
+ * v9fs_inode_from_fid - Helper routine to populate an inode by
+ * issuing a attribute request
+ * @v9ses: session information
+ * @fid: fid to issue attribute request for
+ * @sb: superblock on which to create inode
+ *
+ */
+static inline struct inode *
+v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+			struct super_block *sb)
+{
+	if (v9fs_proto_dotl(v9ses))
+		return v9fs_inode_dotl(v9ses, fid, sb);
+	else
+		return v9fs_inode(v9ses, fid, sb);
+}
+
 /**
  * v9fs_remove - helper function to remove files and directories
  * @dir: directory inode that is being deleted
@@ -563,6 +644,118 @@ error:
 }
 
 /**
+ * v9fs_vfs_create_dotl - VFS hook to create files for 9P2000.L protocol.
+ * @dir: directory inode that is being created
+ * @dentry:  dentry that is being deleted
+ * @mode: create permissions
+ * @nd: path information
+ *
+ */
+
+static int
+v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int mode,
+		struct nameidata *nd)
+{
+	int err = 0;
+	char *name = NULL;
+	gid_t gid;
+	int flags;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL;
+	struct p9_fid *dfid, *ofid;
+	struct file *filp;
+	struct p9_qid qid;
+	struct inode *inode;
+
+	v9ses = v9fs_inode2v9ses(dir);
+	if (nd && nd->flags & LOOKUP_OPEN)
+		flags = nd->intent.open.flags - 1;
+	else
+		flags = O_RDWR;
+
+	name = (char *) dentry->d_name.name;
+	P9_DPRINTK(P9_DEBUG_VFS, "v9fs_vfs_create_dotl: name:%s flags:0x%x "
+			"mode:0x%x\n", name, flags, mode);
+
+	dfid = v9fs_fid_lookup(dentry->d_parent);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		return err;
+	}
+
+	/* clone a fid to use for creation */
+	ofid = p9_client_walk(dfid, 0, NULL, 1);
+	if (IS_ERR(ofid)) {
+		err = PTR_ERR(ofid);
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
+		return err;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	err = p9_client_create_dotl(ofid, name, flags, mode, gid, &qid);
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS,
+				"p9_client_open_dotl failed in creat %d\n",
+				err);
+		goto error;
+	}
+
+	/* No need to populate the inode if we are not opening the file AND
+	 * not in cached mode.
+	 */
+	if (!v9ses->cache && !(nd && nd->flags & LOOKUP_OPEN)) {
+		/* Not in cached mode. No need to populate inode with stat */
+		dentry->d_op = &v9fs_dentry_operations;
+		p9_client_clunk(ofid);
+		d_instantiate(dentry, NULL);
+		return 0;
+	}
+
+	/* Now walk from the parent so we can get an unopened fid. */
+	fid = p9_client_walk(dfid, 1, &name, 1);
+	if (IS_ERR(fid)) {
+		err = PTR_ERR(fid);
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
+		fid = NULL;
+		goto error;
+	}
+
+	/* instantiate inode and assign the unopened fid to dentry */
+	inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
+		P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err);
+		goto error;
+	}
+	dentry->d_op = &v9fs_cached_dentry_operations;
+	d_instantiate(dentry, inode);
+	err = v9fs_fid_add(dentry, fid);
+	if (err < 0)
+		goto error;
+
+	/* if we are opening a file, assign the open fid to the file */
+	if (nd && nd->flags & LOOKUP_OPEN) {
+		filp = lookup_instantiate_filp(nd, dentry, v9fs_open_created);
+		if (IS_ERR(filp)) {
+			p9_client_clunk(ofid);
+			return PTR_ERR(filp);
+		}
+		filp->private_data = ofid;
+	} else
+		p9_client_clunk(ofid);
+
+	return 0;
+
+error:
+	if (ofid)
+		p9_client_clunk(ofid);
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
+/**
  * v9fs_vfs_create - VFS hook to create files
  * @dir: directory inode that is being created
  * @dentry:  dentry that is being deleted
@@ -652,6 +845,83 @@ static int v9fs_vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	return err;
 }
 
+
+/**
+ * v9fs_vfs_mkdir_dotl - VFS mkdir hook to create a directory
+ * @dir:  inode that is being unlinked
+ * @dentry: dentry that is being unlinked
+ * @mode: mode for new directory
+ *
+ */
+
+static int v9fs_vfs_mkdir_dotl(struct inode *dir, struct dentry *dentry,
+					int mode)
+{
+	int err;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL, *dfid = NULL;
+	gid_t gid;
+	char *name;
+	struct inode *inode;
+	struct p9_qid qid;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", dentry->d_name.name);
+	err = 0;
+	v9ses = v9fs_inode2v9ses(dir);
+
+	mode |= S_IFDIR;
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		dfid = NULL;
+		goto error;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_fsgid_for_create failed\n");
+		goto error;
+	}
+
+	name = (char *) dentry->d_name.name;
+	err = p9_client_mkdir_dotl(dfid, name, mode, gid, &qid);
+	if (err < 0)
+		goto error;
+
+	/* instantiate inode and assign the unopened fid to the dentry */
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+				err);
+			fid = NULL;
+			goto error;
+		}
+
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+				err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	}
+error:
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
 /**
  * v9fs_vfs_lookup - VFS lookup hook to "walk" to a new inode
  * @dir:  inode that is being walked from
@@ -678,6 +948,7 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 
 	sb = dir->i_sb;
 	v9ses = v9fs_inode2v9ses(dir);
+	/* We can walk d_parent because we hold the dir->i_mutex */
 	dfid = v9fs_fid_lookup(dentry->d_parent);
 	if (IS_ERR(dfid))
 		return ERR_CAST(dfid);
@@ -785,27 +1056,33 @@ v9fs_vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		goto clunk_olddir;
 	}
 
+	down_write(&v9ses->rename_sem);
 	if (v9fs_proto_dotl(v9ses)) {
 		retval = p9_client_rename(oldfid, newdirfid,
 					(char *) new_dentry->d_name.name);
 		if (retval != -ENOSYS)
 			goto clunk_newdir;
 	}
+	if (old_dentry->d_parent != new_dentry->d_parent) {
+		/*
+		 * 9P .u can only handle file rename in the same directory
+		 */
 
-	/* 9P can only handle file rename in the same directory */
-	if (memcmp(&olddirfid->qid, &newdirfid->qid, sizeof(newdirfid->qid))) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 				"old dir and new dir are different\n");
 		retval = -EXDEV;
 		goto clunk_newdir;
 	}
-
 	v9fs_blank_wstat(&wstat);
 	wstat.muid = v9ses->uname;
 	wstat.name = (char *) new_dentry->d_name.name;
 	retval = p9_client_wstat(oldfid, &wstat);
 
 clunk_newdir:
+	if (!retval)
+		/* successful rename */
+		d_move(old_dentry, new_dentry);
+	up_write(&v9ses->rename_sem);
 	p9_client_clunk(newdirfid);
 
 clunk_olddir:
@@ -853,6 +1130,42 @@ v9fs_vfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	return 0;
 }
 
+static int
+v9fs_vfs_getattr_dotl(struct vfsmount *mnt, struct dentry *dentry,
+		 struct kstat *stat)
+{
+	int err;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid;
+	struct p9_stat_dotl *st;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "dentry: %p\n", dentry);
+	err = -EPERM;
+	v9ses = v9fs_inode2v9ses(dentry->d_inode);
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
+		return simple_getattr(mnt, dentry, stat);
+
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	/* Ask for all the fields in stat structure. Server will return
+	 * whatever it supports
+	 */
+
+	st = p9_client_getattr_dotl(fid, P9_STATS_ALL);
+	if (IS_ERR(st))
+		return PTR_ERR(st);
+
+	v9fs_stat2inode_dotl(st, dentry->d_inode);
+	generic_fillattr(dentry->d_inode, stat);
+	/* Change block size to what the server returned */
+	stat->blksize = st->st_blksize;
+
+	kfree(st);
+	return 0;
+}
+
 /**
  * v9fs_vfs_setattr - set file metadata
  * @dentry: file whose metadata to set
@@ -903,6 +1216,49 @@ static int v9fs_vfs_setattr(struct dentry *dentry, struct iattr *iattr)
 }
 
 /**
+ * v9fs_vfs_setattr_dotl - set file metadata
+ * @dentry: file whose metadata to set
+ * @iattr: metadata assignment structure
+ *
+ */
+
+static int v9fs_vfs_setattr_dotl(struct dentry *dentry, struct iattr *iattr)
+{
+	int retval;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid;
+	struct p9_iattr_dotl p9attr;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "\n");
+
+	retval = inode_change_ok(dentry->d_inode, iattr);
+	if (retval)
+		return retval;
+
+	p9attr.valid = iattr->ia_valid;
+	p9attr.mode = iattr->ia_mode;
+	p9attr.uid = iattr->ia_uid;
+	p9attr.gid = iattr->ia_gid;
+	p9attr.size = iattr->ia_size;
+	p9attr.atime_sec = iattr->ia_atime.tv_sec;
+	p9attr.atime_nsec = iattr->ia_atime.tv_nsec;
+	p9attr.mtime_sec = iattr->ia_mtime.tv_sec;
+	p9attr.mtime_nsec = iattr->ia_mtime.tv_nsec;
+
+	retval = -EPERM;
+	v9ses = v9fs_inode2v9ses(dentry->d_inode);
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	retval = p9_client_setattr(fid, &p9attr);
+	if (retval >= 0)
+		retval = inode_setattr(dentry->d_inode, iattr);
+
+	return retval;
+}
+
+/**
  * v9fs_stat2inode - populate an inode structure with mistat info
  * @stat: Plan 9 metadata (mistat) structure
  * @inode: inode to populate
@@ -980,6 +1336,77 @@ v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
 }
 
 /**
+ * v9fs_stat2inode_dotl - populate an inode structure with stat info
+ * @stat: stat structure
+ * @inode: inode to populate
+ * @sb: superblock of filesystem
+ *
+ */
+
+void
+v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode)
+{
+
+	if ((stat->st_result_mask & P9_STATS_BASIC) == P9_STATS_BASIC) {
+		inode->i_atime.tv_sec = stat->st_atime_sec;
+		inode->i_atime.tv_nsec = stat->st_atime_nsec;
+		inode->i_mtime.tv_sec = stat->st_mtime_sec;
+		inode->i_mtime.tv_nsec = stat->st_mtime_nsec;
+		inode->i_ctime.tv_sec = stat->st_ctime_sec;
+		inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
+		inode->i_uid = stat->st_uid;
+		inode->i_gid = stat->st_gid;
+		inode->i_nlink = stat->st_nlink;
+		inode->i_mode = stat->st_mode;
+		inode->i_rdev = new_decode_dev(stat->st_rdev);
+
+		if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode)))
+			init_special_inode(inode, inode->i_mode, inode->i_rdev);
+
+		i_size_write(inode, stat->st_size);
+		inode->i_blocks = stat->st_blocks;
+	} else {
+		if (stat->st_result_mask & P9_STATS_ATIME) {
+			inode->i_atime.tv_sec = stat->st_atime_sec;
+			inode->i_atime.tv_nsec = stat->st_atime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_MTIME) {
+			inode->i_mtime.tv_sec = stat->st_mtime_sec;
+			inode->i_mtime.tv_nsec = stat->st_mtime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_CTIME) {
+			inode->i_ctime.tv_sec = stat->st_ctime_sec;
+			inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_UID)
+			inode->i_uid = stat->st_uid;
+		if (stat->st_result_mask & P9_STATS_GID)
+			inode->i_gid = stat->st_gid;
+		if (stat->st_result_mask & P9_STATS_NLINK)
+			inode->i_nlink = stat->st_nlink;
+		if (stat->st_result_mask & P9_STATS_MODE) {
+			inode->i_mode = stat->st_mode;
+			if ((S_ISBLK(inode->i_mode)) ||
+						(S_ISCHR(inode->i_mode)))
+				init_special_inode(inode, inode->i_mode,
+								inode->i_rdev);
+		}
+		if (stat->st_result_mask & P9_STATS_RDEV)
+			inode->i_rdev = new_decode_dev(stat->st_rdev);
+		if (stat->st_result_mask & P9_STATS_SIZE)
+			i_size_write(inode, stat->st_size);
+		if (stat->st_result_mask & P9_STATS_BLOCKS)
+			inode->i_blocks = stat->st_blocks;
+	}
+	if (stat->st_result_mask & P9_STATS_GEN)
+			inode->i_generation = stat->st_gen;
+
+	/* Currently we don't support P9_STATS_BTIME and P9_STATS_DATA_VERSION
+	 * because the inode structure does not have fields for them.
+	 */
+}
+
+/**
  * v9fs_qid2ino - convert qid into inode number
  * @qid: qid to hash
  *
@@ -1022,7 +1449,7 @@ static int v9fs_readlink(struct dentry *dentry, char *buffer, int buflen)
 	if (IS_ERR(fid))
 		return PTR_ERR(fid);
 
-	if (!v9fs_proto_dotu(v9ses))
+	if (!v9fs_proto_dotu(v9ses) && !v9fs_proto_dotl(v9ses))
 		return -EBADF;
 
 	st = p9_client_stat(fid);
@@ -1128,6 +1555,99 @@ static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry,
 }
 
 /**
+ * v9fs_vfs_symlink_dotl - helper function to create symlinks
+ * @dir: directory inode containing symlink
+ * @dentry: dentry for symlink
+ * @symname: symlink data
+ *
+ * See Also: 9P2000.L RFC for more information
+ *
+ */
+
+static int
+v9fs_vfs_symlink_dotl(struct inode *dir, struct dentry *dentry,
+		const char *symname)
+{
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *dfid;
+	struct p9_fid *fid = NULL;
+	struct inode *inode;
+	struct p9_qid qid;
+	char *name;
+	int err;
+	gid_t gid;
+
+	name = (char *) dentry->d_name.name;
+	P9_DPRINTK(P9_DEBUG_VFS, "v9fs_vfs_symlink_dotl : %lu,%s,%s\n",
+			dir->i_ino, name, symname);
+	v9ses = v9fs_inode2v9ses(dir);
+
+	dfid = v9fs_fid_lookup(dentry->d_parent);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		return err;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_egid failed %d\n", gid);
+		goto error;
+	}
+
+	/* Server doesn't alter fid on TSYMLINK. Hence no need to clone it. */
+	err = p9_client_symlink(dfid, name, (char *)symname, gid, &qid);
+
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_symlink failed %d\n", err);
+		goto error;
+	}
+
+	if (v9ses->cache) {
+		/* Now walk from the parent so we can get an unopened fid. */
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+					err);
+			fid = NULL;
+			goto error;
+		}
+
+		/* instantiate inode and assign the unopened fid to dentry */
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+					err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	} else {
+		/* Not in cached mode. No need to populate inode with stat */
+		inode = v9fs_get_inode(dir->i_sb, S_IFLNK);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			goto error;
+		}
+		dentry->d_op = &v9fs_dentry_operations;
+		d_instantiate(dentry, inode);
+	}
+
+error:
+	if (fid)
+		p9_client_clunk(fid);
+
+	return err;
+}
+
+/**
  * v9fs_vfs_symlink - helper function to create symlinks
  * @dir: directory inode containing symlink
  * @dentry: dentry for symlink
@@ -1186,6 +1706,76 @@ clunk_fid:
 }
 
 /**
+ * v9fs_vfs_link_dotl - create a hardlink for dotl
+ * @old_dentry: dentry for file to link to
+ * @dir: inode destination for new link
+ * @dentry: dentry for link
+ *
+ */
+
+static int
+v9fs_vfs_link_dotl(struct dentry *old_dentry, struct inode *dir,
+		struct dentry *dentry)
+{
+	int err;
+	struct p9_fid *dfid, *oldfid;
+	char *name;
+	struct v9fs_session_info *v9ses;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "dir ino: %lu, old_name: %s, new_name: %s\n",
+			dir->i_ino, old_dentry->d_name.name,
+			dentry->d_name.name);
+
+	v9ses = v9fs_inode2v9ses(dir);
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid))
+		return PTR_ERR(dfid);
+
+	oldfid = v9fs_fid_lookup(old_dentry);
+	if (IS_ERR(oldfid))
+		return PTR_ERR(oldfid);
+
+	name = (char *) dentry->d_name.name;
+
+	err = p9_client_link(dfid, oldfid, (char *)dentry->d_name.name);
+
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_link failed %d\n", err);
+		return err;
+	}
+
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		/* Get the latest stat info from server. */
+		struct p9_fid *fid;
+		struct p9_stat_dotl *st;
+
+		fid = v9fs_fid_lookup(old_dentry);
+		if (IS_ERR(fid))
+			return PTR_ERR(fid);
+
+		st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+		if (IS_ERR(st))
+			return PTR_ERR(st);
+
+		v9fs_stat2inode_dotl(st, old_dentry->d_inode);
+
+		kfree(st);
+	} else {
+		/* Caching disabled. No need to get upto date stat info.
+		 * This dentry will be released immediately. So, just i_count++
+		 */
+		atomic_inc(&old_dentry->d_inode->i_count);
+	}
+
+	dentry->d_op = old_dentry->d_op;
+	d_instantiate(dentry, old_dentry->d_inode);
+
+	return err;
+}
+
+/**
  * v9fs_vfs_mknod - create a special file
  * @dir: inode destination for new link
  * @dentry: dentry for file
@@ -1230,6 +1820,100 @@ v9fs_vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t rdev)
 	return retval;
 }
 
+/**
+ * v9fs_vfs_mknod_dotl - create a special file
+ * @dir: inode destination for new link
+ * @dentry: dentry for file
+ * @mode: mode for creation
+ * @rdev: device associated with special file
+ *
+ */
+static int
+v9fs_vfs_mknod_dotl(struct inode *dir, struct dentry *dentry, int mode,
+		dev_t rdev)
+{
+	int err;
+	char *name;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL, *dfid = NULL;
+	struct inode *inode;
+	gid_t gid;
+	struct p9_qid qid;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS,
+		" %lu,%s mode: %x MAJOR: %u MINOR: %u\n", dir->i_ino,
+		dentry->d_name.name, mode, MAJOR(rdev), MINOR(rdev));
+
+	if (!new_valid_dev(rdev))
+		return -EINVAL;
+
+	v9ses = v9fs_inode2v9ses(dir);
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		dfid = NULL;
+		goto error;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_fsgid_for_create failed\n");
+		goto error;
+	}
+
+	name = (char *) dentry->d_name.name;
+
+	err = p9_client_mknod_dotl(dfid, name, mode, rdev, gid, &qid);
+	if (err < 0)
+		goto error;
+
+	/* instantiate inode and assign the unopened fid to the dentry */
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+				err);
+			fid = NULL;
+			goto error;
+		}
+
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+				err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	} else {
+		/*
+		 * Not in cached mode. No need to populate inode with stat.
+		 * socket syscall returns a fd, so we need instantiate
+		 */
+		inode = v9fs_get_inode(dir->i_sb, mode);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			goto error;
+		}
+		dentry->d_op = &v9fs_dentry_operations;
+		d_instantiate(dentry, inode);
+	}
+
+error:
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
 static const struct inode_operations v9fs_dir_inode_operations_dotu = {
 	.create = v9fs_vfs_create,
 	.lookup = v9fs_vfs_lookup,
@@ -1238,24 +1922,29 @@ static const struct inode_operations v9fs_dir_inode_operations_dotu = {
 	.unlink = v9fs_vfs_unlink,
 	.mkdir = v9fs_vfs_mkdir,
 	.rmdir = v9fs_vfs_rmdir,
-	.mknod = v9fs_vfs_mknod,
+	.mknod = v9fs_vfs_mknod_dotl,
 	.rename = v9fs_vfs_rename,
 	.getattr = v9fs_vfs_getattr,
 	.setattr = v9fs_vfs_setattr,
 };
 
 static const struct inode_operations v9fs_dir_inode_operations_dotl = {
-	.create = v9fs_vfs_create,
+	.create = v9fs_vfs_create_dotl,
 	.lookup = v9fs_vfs_lookup,
-	.symlink = v9fs_vfs_symlink,
-	.link = v9fs_vfs_link,
+	.link = v9fs_vfs_link_dotl,
+	.symlink = v9fs_vfs_symlink_dotl,
 	.unlink = v9fs_vfs_unlink,
-	.mkdir = v9fs_vfs_mkdir,
+	.mkdir = v9fs_vfs_mkdir_dotl,
 	.rmdir = v9fs_vfs_rmdir,
-	.mknod = v9fs_vfs_mknod,
+	.mknod = v9fs_vfs_mknod_dotl,
 	.rename = v9fs_vfs_rename,
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
+
 };
 
 static const struct inode_operations v9fs_dir_inode_operations = {
@@ -1276,8 +1965,12 @@ static const struct inode_operations v9fs_file_inode_operations = {
 };
 
 static const struct inode_operations v9fs_file_inode_operations_dotl = {
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
 };
 
 static const struct inode_operations v9fs_symlink_inode_operations = {
@@ -1292,6 +1985,10 @@ static const struct inode_operations v9fs_symlink_inode_operations_dotl = {
 	.readlink = generic_readlink,
 	.follow_link = v9fs_vfs_follow_link,
 	.put_link = v9fs_vfs_put_link,
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
 };
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index be74d020436..4b9ede0b41b 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -45,6 +45,7 @@
 #include "v9fs.h"
 #include "v9fs_vfs.h"
 #include "fid.h"
+#include "xattr.h"
 
 static const struct super_operations v9fs_super_ops, v9fs_super_ops_dotl;
 
@@ -77,9 +78,10 @@ v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
 	sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
 	sb->s_blocksize = 1 << sb->s_blocksize_bits;
 	sb->s_magic = V9FS_MAGIC;
-	if (v9fs_proto_dotl(v9ses))
+	if (v9fs_proto_dotl(v9ses)) {
 		sb->s_op = &v9fs_super_ops_dotl;
-	else
+		sb->s_xattr = v9fs_xattr_handlers;
+	} else
 		sb->s_op = &v9fs_super_ops;
 	sb->s_bdi = &v9ses->bdi;
 
@@ -107,7 +109,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 	struct inode *inode = NULL;
 	struct dentry *root = NULL;
 	struct v9fs_session_info *v9ses = NULL;
-	struct p9_wstat *st = NULL;
 	int mode = S_IRWXUGO | S_ISVTX;
 	struct p9_fid *fid;
 	int retval = 0;
@@ -124,16 +125,10 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		goto close_session;
 	}
 
-	st = p9_client_stat(fid);
-	if (IS_ERR(st)) {
-		retval = PTR_ERR(st);
-		goto clunk_fid;
-	}
-
 	sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
 	if (IS_ERR(sb)) {
 		retval = PTR_ERR(sb);
-		goto free_stat;
+		goto clunk_fid;
 	}
 	v9fs_fill_super(sb, v9ses, flags, data);
 
@@ -151,22 +146,38 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 	}
 
 	sb->s_root = root;
-	root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
 
-	v9fs_stat2inode(st, root->d_inode, sb);
+	if (v9fs_proto_dotl(v9ses)) {
+		struct p9_stat_dotl *st = NULL;
+		st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+		if (IS_ERR(st)) {
+			retval = PTR_ERR(st);
+			goto clunk_fid;
+		}
+
+		v9fs_stat2inode_dotl(st, root->d_inode);
+		kfree(st);
+	} else {
+		struct p9_wstat *st = NULL;
+		st = p9_client_stat(fid);
+		if (IS_ERR(st)) {
+			retval = PTR_ERR(st);
+			goto clunk_fid;
+		}
+
+		root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
+		v9fs_stat2inode(st, root->d_inode, sb);
+
+		p9stat_free(st);
+		kfree(st);
+	}
 
 	v9fs_fid_add(root, fid);
-	p9stat_free(st);
-	kfree(st);
 
 P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	simple_set_mnt(mnt, sb);
 	return 0;
 
-free_stat:
-	p9stat_free(st);
-	kfree(st);
-
 clunk_fid:
 	p9_client_clunk(fid);
 
@@ -176,8 +187,6 @@ close_session:
 	return retval;
 
 release_sb:
-	p9stat_free(st);
-	kfree(st);
 	deactivate_locked_super(sb);
 	return retval;
 }
@@ -278,4 +287,5 @@ struct file_system_type v9fs_fs_type = {
 	.get_sb = v9fs_get_sb,
 	.kill_sb = v9fs_kill_super,
 	.owner = THIS_MODULE,
+	.fs_flags = FS_RENAME_DOES_D_MOVE,
 };
diff --git a/fs/9p/xattr.c b/fs/9p/xattr.c
new file mode 100644
index 00000000000..f88e5c2dc87
--- /dev/null
+++ b/fs/9p/xattr.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <net/9p/9p.h>
+#include <net/9p/client.h>
+
+#include "fid.h"
+#include "xattr.h"
+
+/*
+ * v9fs_xattr_get()
+ *
+ * Copy an extended attribute into the buffer
+ * provided, or compute the buffer size required.
+ * Buffer is NULL to compute the size of the buffer required.
+ *
+ * Returns a negative error number on failure, or the number of bytes
+ * used / required on success.
+ */
+ssize_t v9fs_xattr_get(struct dentry *dentry, const char *name,
+		       void *buffer, size_t buffer_size)
+{
+	ssize_t retval;
+	int msize, read_count;
+	u64 offset = 0, attr_size;
+	struct p9_fid *fid, *attr_fid;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: name = %s value_len = %zu\n",
+		__func__, name, buffer_size);
+
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	attr_fid = p9_client_xattrwalk(fid, name, &attr_size);
+	if (IS_ERR(attr_fid)) {
+		retval = PTR_ERR(attr_fid);
+		P9_DPRINTK(P9_DEBUG_VFS,
+			"p9_client_attrwalk failed %zd\n", retval);
+		attr_fid = NULL;
+		goto error;
+	}
+	if (!buffer_size) {
+		/* request to get the attr_size */
+		retval = attr_size;
+		goto error;
+	}
+	if (attr_size > buffer_size) {
+		retval = -ERANGE;
+		goto error;
+	}
+	msize = attr_fid->clnt->msize;
+	while (attr_size) {
+		if (attr_size > (msize - P9_IOHDRSZ))
+			read_count = msize - P9_IOHDRSZ;
+		else
+			read_count = attr_size;
+		read_count = p9_client_read(attr_fid, ((char *)buffer)+offset,
+					NULL, offset, read_count);
+		if (read_count < 0) {
+			/* error in xattr read */
+			retval = read_count;
+			goto error;
+		}
+		offset += read_count;
+		attr_size -= read_count;
+	}
+	/* Total read xattr bytes */
+	retval = offset;
+error:
+	if (attr_fid)
+		p9_client_clunk(attr_fid);
+	return retval;
+
+}
+
+/*
+ * v9fs_xattr_set()
+ *
+ * Create, replace or remove an extended attribute for this inode. Buffer
+ * is NULL to remove an existing extended attribute, and non-NULL to
+ * either replace an existing extended attribute, or create a new extended
+ * attribute. The flags XATTR_REPLACE and XATTR_CREATE
+ * specify that an extended attribute must exist and must not exist
+ * previous to the call, respectively.
+ *
+ * Returns 0, or a negative error number on failure.
+ */
+int v9fs_xattr_set(struct dentry *dentry, const char *name,
+		   const void *value, size_t value_len, int flags)
+{
+	u64 offset = 0;
+	int retval, msize, write_count;
+	struct p9_fid *fid = NULL;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: name = %s value_len = %zu flags = %d\n",
+		__func__, name, value_len, flags);
+
+	fid = v9fs_fid_clone(dentry);
+	if (IS_ERR(fid)) {
+		retval = PTR_ERR(fid);
+		fid = NULL;
+		goto error;
+	}
+	/*
+	 * On success fid points to xattr
+	 */
+	retval = p9_client_xattrcreate(fid, name, value_len, flags);
+	if (retval < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS,
+			"p9_client_xattrcreate failed %d\n", retval);
+		goto error;
+	}
+	msize = fid->clnt->msize;;
+	while (value_len) {
+		if (value_len > (msize - P9_IOHDRSZ))
+			write_count = msize - P9_IOHDRSZ;
+		else
+			write_count = value_len;
+		write_count = p9_client_write(fid, ((char *)value)+offset,
+					NULL, offset, write_count);
+		if (write_count < 0) {
+			/* error in xattr write */
+			retval = write_count;
+			goto error;
+		}
+		offset += write_count;
+		value_len -= write_count;
+	}
+	/* Total read xattr bytes */
+	retval = offset;
+error:
+	if (fid)
+		retval = p9_client_clunk(fid);
+	return retval;
+}
+
+ssize_t v9fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
+{
+	return v9fs_xattr_get(dentry, NULL, buffer, buffer_size);
+}
+
+const struct xattr_handler *v9fs_xattr_handlers[] = {
+	&v9fs_xattr_user_handler,
+	NULL
+};
diff --git a/fs/9p/xattr.h b/fs/9p/xattr.h
new file mode 100644
index 00000000000..9ddf672ae5c
--- /dev/null
+++ b/fs/9p/xattr.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#ifndef FS_9P_XATTR_H
+#define FS_9P_XATTR_H
+
+#include <linux/xattr.h>
+
+extern const struct xattr_handler *v9fs_xattr_handlers[];
+extern struct xattr_handler v9fs_xattr_user_handler;
+
+extern ssize_t v9fs_xattr_get(struct dentry *, const char *,
+			      void *, size_t);
+extern int v9fs_xattr_set(struct dentry *, const char *,
+			  const void *, size_t, int);
+extern ssize_t v9fs_listxattr(struct dentry *, char *, size_t);
+#endif /* FS_9P_XATTR_H */
diff --git a/fs/9p/xattr_user.c b/fs/9p/xattr_user.c
new file mode 100644
index 00000000000..d0b701b7208
--- /dev/null
+++ b/fs/9p/xattr_user.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include "xattr.h"
+
+static int v9fs_xattr_user_get(struct dentry *dentry, const char *name,
+			void *buffer, size_t size, int type)
+{
+	int retval;
+	char *full_name;
+	size_t name_len;
+	size_t prefix_len = XATTR_USER_PREFIX_LEN;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	name_len = strlen(name);
+	full_name = kmalloc(prefix_len + name_len + 1 , GFP_KERNEL);
+	if (!full_name)
+		return -ENOMEM;
+	memcpy(full_name, XATTR_USER_PREFIX, prefix_len);
+	memcpy(full_name+prefix_len, name, name_len);
+	full_name[prefix_len + name_len] = '\0';
+
+	retval = v9fs_xattr_get(dentry, full_name, buffer, size);
+	kfree(full_name);
+	return retval;
+}
+
+static int v9fs_xattr_user_set(struct dentry *dentry, const char *name,
+			const void *value, size_t size, int flags, int type)
+{
+	int retval;
+	char *full_name;
+	size_t name_len;
+	size_t prefix_len = XATTR_USER_PREFIX_LEN;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	name_len = strlen(name);
+	full_name = kmalloc(prefix_len + name_len + 1 , GFP_KERNEL);
+	if (!full_name)
+		return -ENOMEM;
+	memcpy(full_name, XATTR_USER_PREFIX, prefix_len);
+	memcpy(full_name + prefix_len, name, name_len);
+	full_name[prefix_len + name_len] = '\0';
+
+	retval = v9fs_xattr_set(dentry, full_name, value, size, flags);
+	kfree(full_name);
+	return retval;
+}
+
+struct xattr_handler v9fs_xattr_user_handler = {
+	.prefix	= XATTR_USER_PREFIX,
+	.get	= v9fs_xattr_user_get,
+	.set	= v9fs_xattr_user_set,
+};
diff --git a/fs/afs/server.c b/fs/afs/server.c
index f4909951667..9fdc7fe3a7b 100644
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -91,9 +91,10 @@ static struct afs_server *afs_alloc_server(struct afs_cell *cell,
 
 		memcpy(&server->addr, addr, sizeof(struct in_addr));
 		server->addr.s_addr = addr->s_addr;
+		_leave(" = %p{%d}", server, atomic_read(&server->usage));
+	} else {
+		_leave(" = NULL [nomem]");
 	}
-
-	_leave(" = %p{%d}", server, atomic_read(&server->usage));
 	return server;
 }
 
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 3dab9e9948d..722743b152d 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -680,7 +680,6 @@ int afs_writeback_all(struct afs_vnode *vnode)
 {
 	struct address_space *mapping = vnode->vfs_inode.i_mapping;
 	struct writeback_control wbc = {
-		.bdi		= mapping->backing_dev_info,
 		.sync_mode	= WB_SYNC_ALL,
 		.nr_to_write	= LONG_MAX,
 		.range_cyclic	= 1,
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 2c5f9a0e5d7..63039ed9576 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -990,10 +990,9 @@ static int elf_fdpic_map_file_constdisp_on_uclinux(
 
 		/* clear any space allocated but not loaded */
 		if (phdr->p_filesz < phdr->p_memsz) {
-			ret = clear_user((void *) (seg->addr + phdr->p_filesz),
-					 phdr->p_memsz - phdr->p_filesz);
-			if (ret)
-				return ret;
+			if (clear_user((void *) (seg->addr + phdr->p_filesz),
+				       phdr->p_memsz - phdr->p_filesz))
+				return -EFAULT;
 		}
 
 		if (mm) {
@@ -1027,7 +1026,7 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
 	struct elf32_fdpic_loadseg *seg;
 	struct elf32_phdr *phdr;
 	unsigned long load_addr, delta_vaddr;
-	int loop, dvset, ret;
+	int loop, dvset;
 
 	load_addr = params->load_addr;
 	delta_vaddr = 0;
@@ -1127,9 +1126,8 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
 		 * PT_LOAD */
 		if (prot & PROT_WRITE && disp > 0) {
 			kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
-			ret = clear_user((void __user *) maddr, disp);
-			if (ret)
-				return ret;
+			if (clear_user((void __user *) maddr, disp))
+				return -EFAULT;
 			maddr += disp;
 		}
 
@@ -1164,19 +1162,17 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
 		if (prot & PROT_WRITE && excess1 > 0) {
 			kdebug("clear[%d] ad=%lx sz=%lx",
 			       loop, maddr + phdr->p_filesz, excess1);
-			ret = clear_user((void __user *) maddr + phdr->p_filesz,
-					 excess1);
-			if (ret)
-				return ret;
+			if (clear_user((void __user *) maddr + phdr->p_filesz,
+				       excess1))
+				return -EFAULT;
 		}
 
 #else
 		if (excess > 0) {
 			kdebug("clear[%d] ad=%lx sz=%lx",
 			       loop, maddr + phdr->p_filesz, excess);
-			ret = clear_user((void *) maddr + phdr->p_filesz, excess);
-			if (ret)
-				return ret;
+			if (clear_user((void *) maddr + phdr->p_filesz, excess))
+				return -EFAULT;
 		}
 #endif
 
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 49566c1687d..811384bec8d 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -56,16 +56,19 @@
 #endif
 
 /*
- * User data (stack, data section and bss) needs to be aligned
- * for the same reasons as SLAB memory is, and to the same amount.
- * Avoid duplicating architecture specific code by using the same
- * macro as with SLAB allocation:
+ * User data (data section and bss) needs to be aligned.
+ * We pick 0x20 here because it is the max value elf2flt has always
+ * used in producing FLAT files, and because it seems to be large
+ * enough to make all the gcc alignment related tests happy.
  */
-#ifdef ARCH_SLAB_MINALIGN
-#define FLAT_DATA_ALIGN	(ARCH_SLAB_MINALIGN)
-#else
-#define FLAT_DATA_ALIGN	(sizeof(void *))
-#endif
+#define FLAT_DATA_ALIGN	(0x20)
+
+/*
+ * User data (stack) also needs to be aligned.
+ * Here we can be a bit looser than the data sections since this
+ * needs to only meet arch ABI requirements.
+ */
+#define FLAT_STACK_ALIGN	max_t(unsigned long, sizeof(void *), ARCH_SLAB_MINALIGN)
 
 #define RELOC_FAILED 0xff00ff01		/* Relocation incorrect somewhere */
 #define UNLOADED_LIB 0x7ff000ff		/* Placeholder for unused library */
@@ -129,7 +132,7 @@ static unsigned long create_flat_tables(
 
 	sp = (unsigned long *)p;
 	sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
-	sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+	sp = (unsigned long *) ((unsigned long)sp & -FLAT_STACK_ALIGN);
 	argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
 	envp = argv + (argc + 1);
 
@@ -589,7 +592,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 		if (IS_ERR_VALUE(result)) {
 			printk("Unable to read data+bss, errno %d\n", (int)-result);
 			do_munmap(current->mm, textpos, text_len);
-			do_munmap(current->mm, realdatastart, data_len + extra);
+			do_munmap(current->mm, realdatastart, len);
 			ret = result;
 			goto err;
 		}
@@ -876,7 +879,7 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	stack_len = TOP_OF_ARGS - bprm->p;             /* the strings */
 	stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
 	stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-	stack_len += FLAT_DATA_ALIGN - 1;  /* reserve for upcoming alignment */
+	stack_len += FLAT_STACK_ALIGN - 1;  /* reserve for upcoming alignment */
 	
 	res = load_flat_file(bprm, &libinfo, 0, &stack_len);
 	if (IS_ERR_VALUE(res))
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7346c96308a..b3171fb0dc9 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -681,8 +681,8 @@ retry:
 	if (!bd_may_claim(bdev, whole, holder))
 		return -EBUSY;
 
-	/* if someone else is claiming, wait for it to finish */
-	if (whole->bd_claiming && whole->bd_claiming != holder) {
+	/* if claiming is already in progress, wait for it to finish */
+	if (whole->bd_claiming) {
 		wait_queue_head_t *wq = bit_waitqueue(&whole->bd_claiming, 0);
 		DEFINE_WAIT(wait);
 
@@ -706,8 +706,13 @@ retry:
  * @bdev is about to be opened exclusively.  Check @bdev can be opened
  * exclusively and mark that an exclusive open is in progress.  Each
  * successful call to this function must be matched with a call to
- * either bd_claim() or bd_abort_claiming().  If this function
- * succeeds, the matching bd_claim() is guaranteed to succeed.
+ * either bd_finish_claiming() or bd_abort_claiming() (which do not
+ * fail).
+ *
+ * This function is used to gain exclusive access to the block device
+ * without actually causing other exclusive open attempts to fail. It
+ * should be used when the open sequence itself requires exclusive
+ * access but may subsequently fail.
  *
  * CONTEXT:
  * Might sleep.
@@ -734,6 +739,7 @@ static struct block_device *bd_start_claiming(struct block_device *bdev,
 		return ERR_PTR(-ENXIO);
 
 	whole = bdget_disk(disk, 0);
+	module_put(disk->fops->owner);
 	put_disk(disk);
 	if (!whole)
 		return ERR_PTR(-ENOMEM);
@@ -782,15 +788,46 @@ static void bd_abort_claiming(struct block_device *whole, void *holder)
 	__bd_abort_claiming(whole, holder);		/* releases bdev_lock */
 }
 
+/* increment holders when we have a legitimate claim. requires bdev_lock */
+static void __bd_claim(struct block_device *bdev, struct block_device *whole,
+					void *holder)
+{
+	/* note that for a whole device bd_holders
+	 * will be incremented twice, and bd_holder will
+	 * be set to bd_claim before being set to holder
+	 */
+	whole->bd_holders++;
+	whole->bd_holder = bd_claim;
+	bdev->bd_holders++;
+	bdev->bd_holder = holder;
+}
+
+/**
+ * bd_finish_claiming - finish claiming a block device
+ * @bdev: block device of interest (passed to bd_start_claiming())
+ * @whole: whole block device returned by bd_start_claiming()
+ * @holder: holder trying to claim @bdev
+ *
+ * Finish a claiming block started by bd_start_claiming().
+ *
+ * CONTEXT:
+ * Grabs and releases bdev_lock.
+ */
+static void bd_finish_claiming(struct block_device *bdev,
+				struct block_device *whole, void *holder)
+{
+	spin_lock(&bdev_lock);
+	BUG_ON(!bd_may_claim(bdev, whole, holder));
+	__bd_claim(bdev, whole, holder);
+	__bd_abort_claiming(whole, holder); /* not actually an abort */
+}
+
 /**
  * bd_claim - claim a block device
  * @bdev: block device to claim
  * @holder: holder trying to claim @bdev
  *
- * Try to claim @bdev which must have been opened successfully.  This
- * function may be called with or without preceding
- * blk_start_claiming().  In the former case, this function is always
- * successful and terminates the claiming block.
+ * Try to claim @bdev which must have been opened successfully.
  *
  * CONTEXT:
  * Might sleep.
@@ -806,23 +843,10 @@ int bd_claim(struct block_device *bdev, void *holder)
 	might_sleep();
 
 	spin_lock(&bdev_lock);
-
 	res = bd_prepare_to_claim(bdev, whole, holder);
-	if (res == 0) {
-		/* note that for a whole device bd_holders
-		 * will be incremented twice, and bd_holder will
-		 * be set to bd_claim before being set to holder
-		 */
-		whole->bd_holders++;
-		whole->bd_holder = bd_claim;
-		bdev->bd_holders++;
-		bdev->bd_holder = holder;
-	}
-
-	if (whole->bd_claiming)
-		__bd_abort_claiming(whole, holder);	/* releases bdev_lock */
-	else
-		spin_unlock(&bdev_lock);
+	if (res == 0)
+		__bd_claim(bdev, whole, holder);
+	spin_unlock(&bdev_lock);
 
 	return res;
 }
@@ -1476,7 +1500,7 @@ static int blkdev_open(struct inode * inode, struct file * filp)
 
 	if (whole) {
 		if (res == 0)
-			BUG_ON(bd_claim(bdev, filp) != 0);
+			bd_finish_claiming(bdev, whole, filp);
 		else
 			bd_abort_claiming(whole, filp);
 	}
@@ -1712,7 +1736,7 @@ struct block_device *open_bdev_exclusive(const char *path, fmode_t mode, void *h
 	if ((mode & FMODE_WRITE) && bdev_read_only(bdev))
 		goto out_blkdev_put;
 
-	BUG_ON(bd_claim(bdev, holder) != 0);
+	bd_finish_claiming(bdev, whole, holder);
 	return bdev;
 
 out_blkdev_put:
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 8d432cd9d58..2222d161c7b 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -60,6 +60,8 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
 		size = __btrfs_getxattr(inode, name, value, size);
 		if (size > 0) {
 			acl = posix_acl_from_xattr(value, size);
+			if (IS_ERR(acl))
+				return acl;
 			set_cached_acl(inode, type, acl);
 		}
 		kfree(value);
@@ -160,6 +162,12 @@ static int btrfs_xattr_acl_set(struct dentry *dentry, const char *name,
 	int ret;
 	struct posix_acl *acl = NULL;
 
+	if (!is_owner_or_cap(dentry->d_inode))
+		return -EPERM;
+
+	if (!IS_POSIXACL(dentry->d_inode))
+		return -EOPNOTSUPP;
+
 	if (value) {
 		acl = posix_acl_from_xattr(value, size);
 		if (acl == NULL) {
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 0d1d966b0fe..c3df14ce2cc 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2304,12 +2304,17 @@ noinline int btrfs_leaf_free_space(struct btrfs_root *root,
 	return ret;
 }
 
+/*
+ * min slot controls the lowest index we're willing to push to the
+ * right.  We'll push up to and including min_slot, but no lower
+ */
 static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 				      struct btrfs_root *root,
 				      struct btrfs_path *path,
 				      int data_size, int empty,
 				      struct extent_buffer *right,
-				      int free_space, u32 left_nritems)
+				      int free_space, u32 left_nritems,
+				      u32 min_slot)
 {
 	struct extent_buffer *left = path->nodes[0];
 	struct extent_buffer *upper = path->nodes[1];
@@ -2327,7 +2332,7 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 	if (empty)
 		nr = 0;
 	else
-		nr = 1;
+		nr = max_t(u32, 1, min_slot);
 
 	if (path->slots[0] >= left_nritems)
 		push_space += data_size;
@@ -2469,10 +2474,14 @@ out_unlock:
  *
  * returns 1 if the push failed because the other node didn't have enough
  * room, 0 if everything worked out and < 0 if there were major errors.
+ *
+ * this will push starting from min_slot to the end of the leaf.  It won't
+ * push any slot lower than min_slot
  */
 static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
-			   *root, struct btrfs_path *path, int data_size,
-			   int empty)
+			   *root, struct btrfs_path *path,
+			   int min_data_size, int data_size,
+			   int empty, u32 min_slot)
 {
 	struct extent_buffer *left = path->nodes[0];
 	struct extent_buffer *right;
@@ -2514,8 +2523,8 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
 	if (left_nritems == 0)
 		goto out_unlock;
 
-	return __push_leaf_right(trans, root, path, data_size, empty,
-				right, free_space, left_nritems);
+	return __push_leaf_right(trans, root, path, min_data_size, empty,
+				right, free_space, left_nritems, min_slot);
 out_unlock:
 	btrfs_tree_unlock(right);
 	free_extent_buffer(right);
@@ -2525,12 +2534,17 @@ out_unlock:
 /*
  * push some data in the path leaf to the left, trying to free up at
  * least data_size bytes.  returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items.  The
+ * item at 'max_slot' won't be touched.  Use (u32)-1 to make us do all the
+ * items
  */
 static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
 				     struct btrfs_root *root,
 				     struct btrfs_path *path, int data_size,
 				     int empty, struct extent_buffer *left,
-				     int free_space, int right_nritems)
+				     int free_space, u32 right_nritems,
+				     u32 max_slot)
 {
 	struct btrfs_disk_key disk_key;
 	struct extent_buffer *right = path->nodes[0];
@@ -2549,9 +2563,9 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
 	slot = path->slots[1];
 
 	if (empty)
-		nr = right_nritems;
+		nr = min(right_nritems, max_slot);
 	else
-		nr = right_nritems - 1;
+		nr = min(right_nritems - 1, max_slot);
 
 	for (i = 0; i < nr; i++) {
 		item = btrfs_item_nr(right, i);
@@ -2712,10 +2726,14 @@ out:
 /*
  * push some data in the path leaf to the left, trying to free up at
  * least data_size bytes.  returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items.  The
+ * item at 'max_slot' won't be touched.  Use (u32)-1 to make us push all the
+ * items
  */
 static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
-			  *root, struct btrfs_path *path, int data_size,
-			  int empty)
+			  *root, struct btrfs_path *path, int min_data_size,
+			  int data_size, int empty, u32 max_slot)
 {
 	struct extent_buffer *right = path->nodes[0];
 	struct extent_buffer *left;
@@ -2761,8 +2779,9 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
 		goto out;
 	}
 
-	return __push_leaf_left(trans, root, path, data_size,
-			       empty, left, free_space, right_nritems);
+	return __push_leaf_left(trans, root, path, min_data_size,
+			       empty, left, free_space, right_nritems,
+			       max_slot);
 out:
 	btrfs_tree_unlock(left);
 	free_extent_buffer(left);
@@ -2855,6 +2874,64 @@ static noinline int copy_for_split(struct btrfs_trans_handle *trans,
 }
 
 /*
+ * double splits happen when we need to insert a big item in the middle
+ * of a leaf.  A double split can leave us with 3 mostly empty leaves:
+ * leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
+ *          A                 B                 C
+ *
+ * We avoid this by trying to push the items on either side of our target
+ * into the adjacent leaves.  If all goes well we can avoid the double split
+ * completely.
+ */
+static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  int data_size)
+{
+	int ret;
+	int progress = 0;
+	int slot;
+	u32 nritems;
+
+	slot = path->slots[0];
+
+	/*
+	 * try to push all the items after our slot into the
+	 * right leaf
+	 */
+	ret = push_leaf_right(trans, root, path, 1, data_size, 0, slot);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0)
+		progress++;
+
+	nritems = btrfs_header_nritems(path->nodes[0]);
+	/*
+	 * our goal is to get our slot at the start or end of a leaf.  If
+	 * we've done so we're done
+	 */
+	if (path->slots[0] == 0 || path->slots[0] == nritems)
+		return 0;
+
+	if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+		return 0;
+
+	/* try to push all the items before our slot into the next leaf */
+	slot = path->slots[0];
+	ret = push_leaf_left(trans, root, path, 1, data_size, 0, slot);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0)
+		progress++;
+
+	if (progress)
+		return 0;
+	return 1;
+}
+
+/*
  * split the path's leaf in two, making sure there is at least data_size
  * available for the resulting leaf level of the path.
  *
@@ -2876,6 +2953,7 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 	int wret;
 	int split;
 	int num_doubles = 0;
+	int tried_avoid_double = 0;
 
 	l = path->nodes[0];
 	slot = path->slots[0];
@@ -2884,12 +2962,14 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 		return -EOVERFLOW;
 
 	/* first try to make some room by pushing left and right */
-	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
-		wret = push_leaf_right(trans, root, path, data_size, 0);
+	if (data_size) {
+		wret = push_leaf_right(trans, root, path, data_size,
+				       data_size, 0, 0);
 		if (wret < 0)
 			return wret;
 		if (wret) {
-			wret = push_leaf_left(trans, root, path, data_size, 0);
+			wret = push_leaf_left(trans, root, path, data_size,
+					      data_size, 0, (u32)-1);
 			if (wret < 0)
 				return wret;
 		}
@@ -2923,6 +3003,8 @@ again:
 				if (mid != nritems &&
 				    leaf_space_used(l, mid, nritems - mid) +
 				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					if (data_size && !tried_avoid_double)
+						goto push_for_double;
 					split = 2;
 				}
 			}
@@ -2939,6 +3021,8 @@ again:
 				if (mid != nritems &&
 				    leaf_space_used(l, mid, nritems - mid) +
 				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					if (data_size && !tried_avoid_double)
+						goto push_for_double;
 					split = 2 ;
 				}
 			}
@@ -3019,6 +3103,13 @@ again:
 	}
 
 	return ret;
+
+push_for_double:
+	push_for_double_split(trans, root, path, data_size);
+	tried_avoid_double = 1;
+	if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+		return 0;
+	goto again;
 }
 
 static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
@@ -3915,13 +4006,15 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 			extent_buffer_get(leaf);
 
 			btrfs_set_path_blocking(path);
-			wret = push_leaf_left(trans, root, path, 1, 1);
+			wret = push_leaf_left(trans, root, path, 1, 1,
+					      1, (u32)-1);
 			if (wret < 0 && wret != -ENOSPC)
 				ret = wret;
 
 			if (path->nodes[0] == leaf &&
 			    btrfs_header_nritems(leaf)) {
-				wret = push_leaf_right(trans, root, path, 1, 1);
+				wret = push_leaf_right(trans, root, path, 1,
+						       1, 1, 0);
 				if (wret < 0 && wret != -ENOSPC)
 					ret = wret;
 			}
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index f3b287c22ca..34f7c375567 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1941,8 +1941,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 		     btrfs_level_size(tree_root,
 				      btrfs_super_log_root_level(disk_super));
 
-		log_tree_root = kzalloc(sizeof(struct btrfs_root),
-						      GFP_NOFS);
+		log_tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+		if (!log_tree_root) {
+			err = -ENOMEM;
+			goto fail_trans_kthread;
+		}
 
 		__setup_root(nodesize, leafsize, sectorsize, stripesize,
 			     log_tree_root, fs_info, BTRFS_TREE_LOG_OBJECTID);
@@ -1982,6 +1985,10 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->fs_root = btrfs_read_fs_root_no_name(fs_info, &location);
 	if (!fs_info->fs_root)
 		goto fail_trans_kthread;
+	if (IS_ERR(fs_info->fs_root)) {
+		err = PTR_ERR(fs_info->fs_root);
+		goto fail_trans_kthread;
+	}
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		down_read(&fs_info->cleanup_work_sem);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index b9080d71991..32d094002a5 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4360,7 +4360,8 @@ void btrfs_free_tree_block(struct btrfs_trans_handle *trans,
 
 	block_rsv = get_block_rsv(trans, root);
 	cache = btrfs_lookup_block_group(root->fs_info, buf->start);
-	BUG_ON(block_rsv->space_info != cache->space_info);
+	if (block_rsv->space_info != cache->space_info)
+		goto out;
 
 	if (btrfs_header_generation(buf) == trans->transid) {
 		if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index a4080c21ec5..d74e6af9b53 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2594,7 +2594,6 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
 		.sync_io = wbc->sync_mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
-		.bdi		= wbc->bdi,
 		.sync_mode	= wbc->sync_mode,
 		.older_than_this = NULL,
 		.nr_to_write	= 64,
@@ -2628,7 +2627,6 @@ int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode,
 		.sync_io = mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
-		.bdi		= inode->i_mapping->backing_dev_info,
 		.sync_mode	= mode,
 		.older_than_this = NULL,
 		.nr_to_write	= nr_pages * 2,
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 787b50a16a1..e354c33df08 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1140,7 +1140,7 @@ int btrfs_sync_file(struct file *file, int datasync)
 	/*
 	 * ok we haven't committed the transaction yet, lets do a commit
 	 */
-	if (file && file->private_data)
+	if (file->private_data)
 		btrfs_ioctl_trans_end(file);
 
 	trans = btrfs_start_transaction(root, 0);
@@ -1190,14 +1190,22 @@ static const struct vm_operations_struct btrfs_file_vm_ops = {
 
 static int btrfs_file_mmap(struct file	*filp, struct vm_area_struct *vma)
 {
-	vma->vm_ops = &btrfs_file_vm_ops;
+	struct address_space *mapping = filp->f_mapping;
+
+	if (!mapping->a_ops->readpage)
+		return -ENOEXEC;
+
 	file_accessed(filp);
+	vma->vm_ops = &btrfs_file_vm_ops;
+	vma->vm_flags |= VM_CAN_NONLINEAR;
+
 	return 0;
 }
 
 const struct file_operations btrfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
+	.write		= do_sync_write,
 	.aio_read       = generic_file_aio_read,
 	.splice_read	= generic_file_splice_read,
 	.aio_write	= btrfs_file_aio_write,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index fa6ccc1bfe2..1bff92ad474 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2673,7 +2673,7 @@ static int check_path_shared(struct btrfs_root *root,
 	struct extent_buffer *eb;
 	int level;
 	int ret;
-	u64 refs;
+	u64 refs = 1;
 
 	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
 		if (!path->nodes[level])
@@ -6884,7 +6884,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		if (em->block_start == EXTENT_MAP_HOLE ||
 		    (cur_offset >= inode->i_size &&
 		     !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-			ret = btrfs_prealloc_file_range(inode, 0, cur_offset,
+			ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
 							last_byte - cur_offset,
 							1 << inode->i_blkbits,
 							offset + len,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 4cdb98cf26d..9254b3d58db 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1280,7 +1280,7 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file,
 	trans = btrfs_start_transaction(root, 0);
 	if (IS_ERR(trans)) {
 		err = PTR_ERR(trans);
-		goto out;
+		goto out_up_write;
 	}
 	trans->block_rsv = &root->fs_info->global_block_rsv;
 
@@ -1458,7 +1458,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 	 */
 
 	/* the destination must be opened for writing */
-	if (!(file->f_mode & FMODE_WRITE))
+	if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND))
 		return -EINVAL;
 
 	ret = mnt_want_write(file->f_path.mnt);
@@ -1511,7 +1511,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 
 	/* determine range to clone */
 	ret = -EINVAL;
-	if (off >= src->i_size || off + len > src->i_size)
+	if (off + len > src->i_size || off + len < off)
 		goto out_unlock;
 	if (len == 0)
 		olen = len = src->i_size - off;
@@ -1578,6 +1578,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 			u64 disko = 0, diskl = 0;
 			u64 datao = 0, datal = 0;
 			u8 comp;
+			u64 endoff;
 
 			size = btrfs_item_size_nr(leaf, slot);
 			read_extent_buffer(leaf, buf,
@@ -1712,9 +1713,18 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 			btrfs_release_path(root, path);
 
 			inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-			if (new_key.offset + datal > inode->i_size)
-				btrfs_i_size_write(inode,
-						   new_key.offset + datal);
+
+			/*
+			 * we round up to the block size at eof when
+			 * determining which extents to clone above,
+			 * but shouldn't round up the file size
+			 */
+			endoff = new_key.offset + datal;
+			if (endoff > off+olen)
+				endoff = off+olen;
+			if (endoff > inode->i_size)
+				btrfs_i_size_write(inode, endoff);
+
 			BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
 			ret = btrfs_update_inode(trans, root, inode);
 			BUG_ON(ret);
@@ -1845,7 +1855,7 @@ static long btrfs_ioctl_default_subvol(struct file *file, void __user *argp)
 	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
 				   dir_id, "default", 7, 1);
-	if (!di) {
+	if (IS_ERR_OR_NULL(di)) {
 		btrfs_free_path(path);
 		btrfs_end_transaction(trans, root);
 		printk(KERN_ERR "Umm, you don't have the default dir item, "
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 05d41e56923..b37d723b9d4 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -784,16 +784,17 @@ again:
 				struct btrfs_extent_ref_v0 *ref0;
 				ref0 = btrfs_item_ptr(eb, path1->slots[0],
 						struct btrfs_extent_ref_v0);
-				root = find_tree_root(rc, eb, ref0);
-				if (!root->ref_cows)
-					cur->cowonly = 1;
 				if (key.objectid == key.offset) {
+					root = find_tree_root(rc, eb, ref0);
 					if (root && !should_ignore_root(root))
 						cur->root = root;
 					else
 						list_add(&cur->list, &useless);
 					break;
 				}
+				if (is_cowonly_root(btrfs_ref_root_v0(eb,
+								      ref0)))
+					cur->cowonly = 1;
 			}
 #else
 		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index b91ccd97264..2d958be761c 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -330,7 +330,6 @@ int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 {
 	struct btrfs_path *path;
 	int ret;
-	u32 refs;
 	struct btrfs_root_item *ri;
 	struct extent_buffer *leaf;
 
@@ -344,8 +343,6 @@ int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 	leaf = path->nodes[0];
 	ri = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_item);
 
-	refs = btrfs_disk_root_refs(leaf, ri);
-	BUG_ON(refs != 0);
 	ret = btrfs_del_item(trans, root, path);
 out:
 	btrfs_free_path(path);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index d34b2dfc962..f2393b39031 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -360,6 +360,8 @@ static struct dentry *get_default_root(struct super_block *sb,
 	 */
 	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
+	if (IS_ERR(di))
+		return ERR_CAST(di);
 	if (!di) {
 		/*
 		 * Ok the default dir item isn't there.  This is weird since
@@ -390,8 +392,8 @@ setup_root:
 	location.offset = 0;
 
 	inode = btrfs_iget(sb, &location, new_root, &new);
-	if (!inode)
-		return ERR_PTR(-ENOMEM);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
 
 	/*
 	 * If we're just mounting the root most subvol put the inode and return
diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig
index 04b8280582a..bc87b9c1d27 100644
--- a/fs/ceph/Kconfig
+++ b/fs/ceph/Kconfig
@@ -2,7 +2,7 @@ config CEPH_FS
         tristate "Ceph distributed file system (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL
 	select LIBCRC32C
-	select CONFIG_CRYPTO_AES
+	select CRYPTO_AES
 	help
 	  Choose Y or M here to include support for mounting the
 	  experimental Ceph distributed file system.  Ceph is an extremely
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index 83d4d2785ff..6d44053ecff 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -493,7 +493,7 @@ static int ceph_x_handle_reply(struct ceph_auth_client *ac, int result,
 		return -EAGAIN;
 	}
 
-	op = le32_to_cpu(head->op);
+	op = le16_to_cpu(head->op);
 	result = le32_to_cpu(head->result);
 	dout("handle_reply op %d result %d\n", op, result);
 	switch (op) {
@@ -613,6 +613,9 @@ static void ceph_x_destroy(struct ceph_auth_client *ac)
 		remove_ticket_handler(ac, th);
 	}
 
+	if (xi->auth_authorizer.buf)
+		ceph_buffer_put(xi->auth_authorizer.buf);
+
 	kfree(ac->private);
 	ac->private = NULL;
 }
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index ae3e3a30644..b81be9a5648 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -244,8 +244,14 @@ static struct ceph_cap *get_cap(struct ceph_cap_reservation *ctx)
 	struct ceph_cap *cap = NULL;
 
 	/* temporary, until we do something about cap import/export */
-	if (!ctx)
-		return kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+	if (!ctx) {
+		cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+		if (cap) {
+			caps_use_count++;
+			caps_total_count++;
+		}
+		return cap;
+	}
 
 	spin_lock(&caps_list_lock);
 	dout("get_cap ctx=%p (%d) %d = %d used + %d resv + %d avail\n",
@@ -621,7 +627,7 @@ retry:
 	if (fmode >= 0)
 		__ceph_get_fmode(ci, fmode);
 	spin_unlock(&inode->i_lock);
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	return 0;
 }
 
@@ -981,6 +987,46 @@ static int send_cap_msg(struct ceph_mds_session *session,
 	return 0;
 }
 
+static void __queue_cap_release(struct ceph_mds_session *session,
+				u64 ino, u64 cap_id, u32 migrate_seq,
+				u32 issue_seq)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_cap_release *head;
+	struct ceph_mds_cap_item *item;
+
+	spin_lock(&session->s_cap_lock);
+	BUG_ON(!session->s_num_cap_releases);
+	msg = list_first_entry(&session->s_cap_releases,
+			       struct ceph_msg, list_head);
+
+	dout(" adding %llx release to mds%d msg %p (%d left)\n",
+	     ino, session->s_mds, msg, session->s_num_cap_releases);
+
+	BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
+	head = msg->front.iov_base;
+	head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
+	item = msg->front.iov_base + msg->front.iov_len;
+	item->ino = cpu_to_le64(ino);
+	item->cap_id = cpu_to_le64(cap_id);
+	item->migrate_seq = cpu_to_le32(migrate_seq);
+	item->seq = cpu_to_le32(issue_seq);
+
+	session->s_num_cap_releases--;
+
+	msg->front.iov_len += sizeof(*item);
+	if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
+		dout(" release msg %p full\n", msg);
+		list_move_tail(&msg->list_head, &session->s_cap_releases_done);
+	} else {
+		dout(" release msg %p at %d/%d (%d)\n", msg,
+		     (int)le32_to_cpu(head->num),
+		     (int)CEPH_CAPS_PER_RELEASE,
+		     (int)msg->front.iov_len);
+	}
+	spin_unlock(&session->s_cap_lock);
+}
+
 /*
  * Queue cap releases when an inode is dropped from our cache.  Since
  * inode is about to be destroyed, there is no need for i_lock.
@@ -994,41 +1040,9 @@ void ceph_queue_caps_release(struct inode *inode)
 	while (p) {
 		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
 		struct ceph_mds_session *session = cap->session;
-		struct ceph_msg *msg;
-		struct ceph_mds_cap_release *head;
-		struct ceph_mds_cap_item *item;
 
-		spin_lock(&session->s_cap_lock);
-		BUG_ON(!session->s_num_cap_releases);
-		msg = list_first_entry(&session->s_cap_releases,
-				       struct ceph_msg, list_head);
-
-		dout(" adding %p release to mds%d msg %p (%d left)\n",
-		     inode, session->s_mds, msg, session->s_num_cap_releases);
-
-		BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
-		head = msg->front.iov_base;
-		head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
-		item = msg->front.iov_base + msg->front.iov_len;
-		item->ino = cpu_to_le64(ceph_ino(inode));
-		item->cap_id = cpu_to_le64(cap->cap_id);
-		item->migrate_seq = cpu_to_le32(cap->mseq);
-		item->seq = cpu_to_le32(cap->issue_seq);
-
-		session->s_num_cap_releases--;
-
-		msg->front.iov_len += sizeof(*item);
-		if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
-			dout(" release msg %p full\n", msg);
-			list_move_tail(&msg->list_head,
-				       &session->s_cap_releases_done);
-		} else {
-			dout(" release msg %p at %d/%d (%d)\n", msg,
-			     (int)le32_to_cpu(head->num),
-			     (int)CEPH_CAPS_PER_RELEASE,
-			     (int)msg->front.iov_len);
-		}
-		spin_unlock(&session->s_cap_lock);
+		__queue_cap_release(session, ceph_ino(inode), cap->cap_id,
+				    cap->mseq, cap->issue_seq);
 		p = rb_next(p);
 		__ceph_remove_cap(cap);
 	}
@@ -1167,7 +1181,7 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 	}
 
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 
 	return delayed;
 }
@@ -2139,7 +2153,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had)
 	else if (flushsnaps)
 		ceph_flush_snaps(ci);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 	if (put)
 		iput(inode);
 }
@@ -2215,7 +2229,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 		iput(inode);
 	} else if (complete_capsnap) {
 		ceph_flush_snaps(ci);
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 	}
 	if (drop_capsnap)
 		iput(inode);
@@ -2391,7 +2405,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	if (queue_invalidate)
 		ceph_queue_invalidate(inode);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 
 	if (check_caps == 1)
 		ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
@@ -2446,7 +2460,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid,
 					 struct ceph_inode_info,
 					 i_flushing_item)->vfs_inode);
 		mdsc->num_cap_flushing--;
-		wake_up(&mdsc->cap_flushing_wq);
+		wake_up_all(&mdsc->cap_flushing_wq);
 		dout(" inode %p now !flushing\n", inode);
 
 		if (ci->i_dirty_caps == 0) {
@@ -2458,7 +2472,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid,
 		}
 	}
 	spin_unlock(&mdsc->cap_dirty_lock);
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 
 out:
 	spin_unlock(&inode->i_lock);
@@ -2655,7 +2669,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 	struct ceph_mds_caps *h;
 	int mds = session->s_mds;
 	int op;
-	u32 seq;
+	u32 seq, mseq;
 	struct ceph_vino vino;
 	u64 cap_id;
 	u64 size, max_size;
@@ -2675,6 +2689,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 	vino.snap = CEPH_NOSNAP;
 	cap_id = le64_to_cpu(h->cap_id);
 	seq = le32_to_cpu(h->seq);
+	mseq = le32_to_cpu(h->migrate_seq);
 	size = le64_to_cpu(h->size);
 	max_size = le64_to_cpu(h->max_size);
 
@@ -2689,6 +2704,18 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 	     vino.snap, inode);
 	if (!inode) {
 		dout(" i don't have ino %llx\n", vino.ino);
+
+		if (op == CEPH_CAP_OP_IMPORT)
+			__queue_cap_release(session, vino.ino, cap_id,
+					    mseq, seq);
+
+		/*
+		 * send any full release message to try to move things
+		 * along for the mds (who clearly thinks we still have this
+		 * cap).
+		 */
+		ceph_add_cap_releases(mdsc, session, -1);
+		ceph_send_cap_releases(mdsc, session);
 		goto done;
 	}
 
@@ -2714,7 +2741,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 	spin_lock(&inode->i_lock);
 	cap = __get_cap_for_mds(ceph_inode(inode), mds);
 	if (!cap) {
-		dout("no cap on %p ino %llx.%llx from mds%d, releasing\n",
+		dout(" no cap on %p ino %llx.%llx from mds%d\n",
 		     inode, ceph_ino(inode), ceph_snap(inode), mds);
 		spin_unlock(&inode->i_lock);
 		goto done;
@@ -2865,18 +2892,19 @@ int ceph_encode_inode_release(void **p, struct inode *inode,
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct ceph_cap *cap;
 	struct ceph_mds_request_release *rel = *p;
+	int used, dirty;
 	int ret = 0;
-	int used = 0;
 
 	spin_lock(&inode->i_lock);
 	used = __ceph_caps_used(ci);
+	dirty = __ceph_caps_dirty(ci);
 
-	dout("encode_inode_release %p mds%d used %s drop %s unless %s\n", inode,
-	     mds, ceph_cap_string(used), ceph_cap_string(drop),
+	dout("encode_inode_release %p mds%d used|dirty %s drop %s unless %s\n",
+	     inode, mds, ceph_cap_string(used|dirty), ceph_cap_string(drop),
 	     ceph_cap_string(unless));
 
-	/* only drop unused caps */
-	drop &= ~used;
+	/* only drop unused, clean caps */
+	drop &= ~(used | dirty);
 
 	cap = __get_cap_for_mds(ci, mds);
 	if (cap && __cap_is_valid(cap)) {
@@ -2956,6 +2984,7 @@ int ceph_encode_dentry_release(void **p, struct dentry *dentry,
 		memcpy(*p, dentry->d_name.name, dentry->d_name.len);
 		*p += dentry->d_name.len;
 		rel->dname_seq = cpu_to_le32(di->lease_seq);
+		__ceph_mdsc_drop_dentry_lease(dentry);
 	}
 	spin_unlock(&dentry->d_lock);
 	return ret;
diff --git a/fs/ceph/crush/mapper.c b/fs/ceph/crush/mapper.c
index 9ba54efb654..a4eec133258 100644
--- a/fs/ceph/crush/mapper.c
+++ b/fs/ceph/crush/mapper.c
@@ -238,7 +238,7 @@ static int bucket_straw_choose(struct crush_bucket_straw *bucket,
 
 static int crush_bucket_choose(struct crush_bucket *in, int x, int r)
 {
-	dprintk("choose %d x=%d r=%d\n", in->id, x, r);
+	dprintk(" crush_bucket_choose %d x=%d r=%d\n", in->id, x, r);
 	switch (in->alg) {
 	case CRUSH_BUCKET_UNIFORM:
 		return bucket_uniform_choose((struct crush_bucket_uniform *)in,
@@ -264,7 +264,7 @@ static int crush_bucket_choose(struct crush_bucket *in, int x, int r)
  */
 static int is_out(struct crush_map *map, __u32 *weight, int item, int x)
 {
-	if (weight[item] >= 0x1000)
+	if (weight[item] >= 0x10000)
 		return 0;
 	if (weight[item] == 0)
 		return 1;
@@ -305,7 +305,9 @@ static int crush_choose(struct crush_map *map,
 	int itemtype;
 	int collide, reject;
 	const int orig_tries = 5; /* attempts before we fall back to search */
-	dprintk("choose bucket %d x %d outpos %d\n", bucket->id, x, outpos);
+
+	dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d\n", recurse_to_leaf ? "_LEAF" : "",
+		bucket->id, x, outpos, numrep);
 
 	for (rep = outpos; rep < numrep; rep++) {
 		/* keep trying until we get a non-out, non-colliding item */
@@ -366,6 +368,7 @@ static int crush_choose(struct crush_map *map,
 					BUG_ON(item >= 0 ||
 					       (-1-item) >= map->max_buckets);
 					in = map->buckets[-1-item];
+					retry_bucket = 1;
 					continue;
 				}
 
@@ -377,15 +380,25 @@ static int crush_choose(struct crush_map *map,
 					}
 				}
 
-				if (recurse_to_leaf &&
-				    item < 0 &&
-				    crush_choose(map, map->buckets[-1-item],
-						 weight,
-						 x, outpos+1, 0,
-						 out2, outpos,
-						 firstn, 0, NULL) <= outpos) {
-					reject = 1;
-				} else {
+				reject = 0;
+				if (recurse_to_leaf) {
+					if (item < 0) {
+						if (crush_choose(map,
+							 map->buckets[-1-item],
+							 weight,
+							 x, outpos+1, 0,
+							 out2, outpos,
+							 firstn, 0,
+							 NULL) <= outpos)
+							/* didn't get leaf */
+							reject = 1;
+					} else {
+						/* we already have a leaf! */
+						out2[outpos] = item;
+					}
+				}
+
+				if (!reject) {
 					/* out? */
 					if (itemtype == 0)
 						reject = is_out(map, weight,
@@ -424,12 +437,12 @@ reject:
 			continue;
 		}
 
-		dprintk("choose got %d\n", item);
+		dprintk("CHOOSE got %d\n", item);
 		out[outpos] = item;
 		outpos++;
 	}
 
-	dprintk("choose returns %d\n", outpos);
+	dprintk("CHOOSE returns %d\n", outpos);
 	return outpos;
 }
 
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
index 3be33fb066c..f2f5332ddbb 100644
--- a/fs/ceph/debugfs.c
+++ b/fs/ceph/debugfs.c
@@ -261,7 +261,7 @@ static int osdc_show(struct seq_file *s, void *pp)
 
 static int caps_show(struct seq_file *s, void *p)
 {
-	struct ceph_client *client = p;
+	struct ceph_client *client = s->private;
 	int total, avail, used, reserved, min;
 
 	ceph_reservation_status(client, &total, &avail, &used, &reserved, &min);
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index f85719310db..f94ed3c7f6a 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -266,6 +266,7 @@ static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir)
 	spin_lock(&inode->i_lock);
 	if ((filp->f_pos == 2 || fi->dentry) &&
 	    !ceph_test_opt(client, NOASYNCREADDIR) &&
+	    ceph_snap(inode) != CEPH_SNAPDIR &&
 	    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
 	    __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
 		err = __dcache_readdir(filp, dirent, filldir);
@@ -1013,18 +1014,22 @@ out_touch:
 
 /*
  * When a dentry is released, clear the dir I_COMPLETE if it was part
- * of the current dir gen.
+ * of the current dir gen or if this is in the snapshot namespace.
  */
 static void ceph_dentry_release(struct dentry *dentry)
 {
 	struct ceph_dentry_info *di = ceph_dentry(dentry);
 	struct inode *parent_inode = dentry->d_parent->d_inode;
+	u64 snapid = ceph_snap(parent_inode);
 
-	if (parent_inode) {
+	dout("dentry_release %p parent %p\n", dentry, parent_inode);
+
+	if (parent_inode && snapid != CEPH_SNAPDIR) {
 		struct ceph_inode_info *ci = ceph_inode(parent_inode);
 
 		spin_lock(&parent_inode->i_lock);
-		if (ci->i_shared_gen == di->lease_shared_gen) {
+		if (ci->i_shared_gen == di->lease_shared_gen ||
+		    snapid <= CEPH_MAXSNAP) {
 			dout(" clearing %p complete (d_release)\n",
 			     parent_inode);
 			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
@@ -1241,7 +1246,9 @@ struct dentry_operations ceph_dentry_ops = {
 
 struct dentry_operations ceph_snapdir_dentry_ops = {
 	.d_revalidate = ceph_snapdir_d_revalidate,
+	.d_release = ceph_dentry_release,
 };
 
 struct dentry_operations ceph_snap_dentry_ops = {
+	.d_release = ceph_dentry_release,
 };
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 6251a1574b9..7c08698fad3 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -265,7 +265,7 @@ int ceph_release(struct inode *inode, struct file *file)
 	kmem_cache_free(ceph_file_cachep, cf);
 
 	/* wake up anyone waiting for caps on this inode */
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	return 0;
 }
 
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 226f5a50d36..389f9dbd994 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -827,7 +827,7 @@ static void ceph_set_dentry_offset(struct dentry *dn)
 
 	spin_lock(&dcache_lock);
 	spin_lock(&dn->d_lock);
-	list_move_tail(&dir->d_subdirs, &dn->d_u.d_child);
+	list_move(&dn->d_u.d_child, &dir->d_subdirs);
 	dout("set_dentry_offset %p %lld (%p %p)\n", dn, di->offset,
 	     dn->d_u.d_child.prev, dn->d_u.d_child.next);
 	spin_unlock(&dn->d_lock);
@@ -854,8 +854,8 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
 		d_drop(dn);
 	realdn = d_materialise_unique(dn, in);
 	if (IS_ERR(realdn)) {
-		pr_err("splice_dentry error %p inode %p ino %llx.%llx\n",
-		       dn, in, ceph_vinop(in));
+		pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n",
+		       PTR_ERR(realdn), dn, in, ceph_vinop(in));
 		if (prehash)
 			*prehash = false; /* don't rehash on error */
 		dn = realdn; /* note realdn contains the error */
@@ -1199,8 +1199,10 @@ retry_lookup:
 				goto out;
 			}
 			err = ceph_init_dentry(dn);
-			if (err < 0)
+			if (err < 0) {
+				dput(dn);
 				goto out;
+			}
 		} else if (dn->d_inode &&
 			   (ceph_ino(dn->d_inode) != vino.ino ||
 			    ceph_snap(dn->d_inode) != vino.snap)) {
@@ -1234,18 +1236,23 @@ retry_lookup:
 				goto out;
 			}
 			dn = splice_dentry(dn, in, NULL);
+			if (IS_ERR(dn))
+				dn = NULL;
 		}
 
 		if (fill_inode(in, &rinfo->dir_in[i], NULL, session,
 			       req->r_request_started, -1,
 			       &req->r_caps_reservation) < 0) {
 			pr_err("fill_inode badness on %p\n", in);
-			dput(dn);
-			continue;
+			goto next_item;
 		}
-		update_dentry_lease(dn, rinfo->dir_dlease[i],
-				    req->r_session, req->r_request_started);
-		dput(dn);
+		if (dn)
+			update_dentry_lease(dn, rinfo->dir_dlease[i],
+					    req->r_session,
+					    req->r_request_started);
+next_item:
+		if (dn)
+			dput(dn);
 	}
 	req->r_did_prepopulate = true;
 
@@ -1494,7 +1501,7 @@ retry:
 	if (wrbuffer_refs == 0)
 		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 }
 
 
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index b49f12822cb..dd440bd438a 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -868,7 +868,7 @@ static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap,
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	if (arg) {
 		spin_lock(&inode->i_lock);
 		ci->i_wanted_max_size = 0;
@@ -1066,9 +1066,9 @@ static int trim_caps(struct ceph_mds_client *mdsc,
  *
  * Called under s_mutex.
  */
-static int add_cap_releases(struct ceph_mds_client *mdsc,
-			    struct ceph_mds_session *session,
-			    int extra)
+int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+			  struct ceph_mds_session *session,
+			  int extra)
 {
 	struct ceph_msg *msg;
 	struct ceph_mds_cap_release *head;
@@ -1176,8 +1176,8 @@ static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq)
 /*
  * called under s_mutex
  */
-static void send_cap_releases(struct ceph_mds_client *mdsc,
-		       struct ceph_mds_session *session)
+void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+			    struct ceph_mds_session *session)
 {
 	struct ceph_msg *msg;
 
@@ -1514,6 +1514,9 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 	ceph_encode_filepath(&p, end, ino1, path1);
 	ceph_encode_filepath(&p, end, ino2, path2);
 
+	/* make note of release offset, in case we need to replay */
+	req->r_request_release_offset = p - msg->front.iov_base;
+
 	/* cap releases */
 	releases = 0;
 	if (req->r_inode_drop)
@@ -1561,7 +1564,7 @@ static void complete_request(struct ceph_mds_client *mdsc,
 	if (req->r_callback)
 		req->r_callback(mdsc, req);
 	else
-		complete(&req->r_completion);
+		complete_all(&req->r_completion);
 }
 
 /*
@@ -1580,6 +1583,32 @@ static int __prepare_send_request(struct ceph_mds_client *mdsc,
 	dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
 	     req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
 
+	if (req->r_got_unsafe) {
+		/*
+		 * Replay.  Do not regenerate message (and rebuild
+		 * paths, etc.); just use the original message.
+		 * Rebuilding paths will break for renames because
+		 * d_move mangles the src name.
+		 */
+		msg = req->r_request;
+		rhead = msg->front.iov_base;
+
+		flags = le32_to_cpu(rhead->flags);
+		flags |= CEPH_MDS_FLAG_REPLAY;
+		rhead->flags = cpu_to_le32(flags);
+
+		if (req->r_target_inode)
+			rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+
+		rhead->num_retry = req->r_attempts - 1;
+
+		/* remove cap/dentry releases from message */
+		rhead->num_releases = 0;
+		msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
+		msg->front.iov_len = req->r_request_release_offset;
+		return 0;
+	}
+
 	if (req->r_request) {
 		ceph_msg_put(req->r_request);
 		req->r_request = NULL;
@@ -1601,13 +1630,9 @@ static int __prepare_send_request(struct ceph_mds_client *mdsc,
 	rhead->flags = cpu_to_le32(flags);
 	rhead->num_fwd = req->r_num_fwd;
 	rhead->num_retry = req->r_attempts - 1;
+	rhead->ino = 0;
 
 	dout(" r_locked_dir = %p\n", req->r_locked_dir);
-
-	if (req->r_target_inode && req->r_got_unsafe)
-		rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
-	else
-		rhead->ino = 0;
 	return 0;
 }
 
@@ -1907,7 +1932,7 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
 	if (head->safe) {
 		req->r_got_safe = true;
 		__unregister_request(mdsc, req);
-		complete(&req->r_safe_completion);
+		complete_all(&req->r_safe_completion);
 
 		if (req->r_got_unsafe) {
 			/*
@@ -1922,7 +1947,7 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
 
 			/* last unsafe request during umount? */
 			if (mdsc->stopping && !__get_oldest_req(mdsc))
-				complete(&mdsc->safe_umount_waiters);
+				complete_all(&mdsc->safe_umount_waiters);
 			mutex_unlock(&mdsc->mutex);
 			goto out;
 		}
@@ -1980,7 +2005,7 @@ out_err:
 	}
 	mutex_unlock(&mdsc->mutex);
 
-	add_cap_releases(mdsc, req->r_session, -1);
+	ceph_add_cap_releases(mdsc, req->r_session, -1);
 	mutex_unlock(&session->s_mutex);
 
 	/* kick calling process */
@@ -2101,7 +2126,7 @@ static void handle_session(struct ceph_mds_session *session,
 			pr_info("mds%d reconnect denied\n", session->s_mds);
 		remove_session_caps(session);
 		wake = 1; /* for good measure */
-		complete(&mdsc->session_close_waiters);
+		complete_all(&mdsc->session_close_waiters);
 		kick_requests(mdsc, mds);
 		break;
 
@@ -2433,6 +2458,7 @@ static void handle_lease(struct ceph_mds_client *mdsc,
 	struct ceph_dentry_info *di;
 	int mds = session->s_mds;
 	struct ceph_mds_lease *h = msg->front.iov_base;
+	u32 seq;
 	struct ceph_vino vino;
 	int mask;
 	struct qstr dname;
@@ -2446,6 +2472,7 @@ static void handle_lease(struct ceph_mds_client *mdsc,
 	vino.ino = le64_to_cpu(h->ino);
 	vino.snap = CEPH_NOSNAP;
 	mask = le16_to_cpu(h->mask);
+	seq = le32_to_cpu(h->seq);
 	dname.name = (void *)h + sizeof(*h) + sizeof(u32);
 	dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
 	if (dname.len != get_unaligned_le32(h+1))
@@ -2456,8 +2483,9 @@ static void handle_lease(struct ceph_mds_client *mdsc,
 
 	/* lookup inode */
 	inode = ceph_find_inode(sb, vino);
-	dout("handle_lease '%s', mask %d, ino %llx %p\n",
-	     ceph_lease_op_name(h->action), mask, vino.ino, inode);
+	dout("handle_lease %s, mask %d, ino %llx %p %.*s\n",
+	     ceph_lease_op_name(h->action), mask, vino.ino, inode,
+	     dname.len, dname.name);
 	if (inode == NULL) {
 		dout("handle_lease no inode %llx\n", vino.ino);
 		goto release;
@@ -2482,7 +2510,8 @@ static void handle_lease(struct ceph_mds_client *mdsc,
 	switch (h->action) {
 	case CEPH_MDS_LEASE_REVOKE:
 		if (di && di->lease_session == session) {
-			h->seq = cpu_to_le32(di->lease_seq);
+			if (ceph_seq_cmp(di->lease_seq, seq) > 0)
+				h->seq = cpu_to_le32(di->lease_seq);
 			__ceph_mdsc_drop_dentry_lease(dentry);
 		}
 		release = 1;
@@ -2496,7 +2525,7 @@ static void handle_lease(struct ceph_mds_client *mdsc,
 			unsigned long duration =
 				le32_to_cpu(h->duration_ms) * HZ / 1000;
 
-			di->lease_seq = le32_to_cpu(h->seq);
+			di->lease_seq = seq;
 			dentry->d_time = di->lease_renew_from + duration;
 			di->lease_renew_after = di->lease_renew_from +
 				(duration >> 1);
@@ -2686,10 +2715,10 @@ static void delayed_work(struct work_struct *work)
 			send_renew_caps(mdsc, s);
 		else
 			ceph_con_keepalive(&s->s_con);
-		add_cap_releases(mdsc, s, -1);
+		ceph_add_cap_releases(mdsc, s, -1);
 		if (s->s_state == CEPH_MDS_SESSION_OPEN ||
 		    s->s_state == CEPH_MDS_SESSION_HUNG)
-			send_cap_releases(mdsc, s);
+			ceph_send_cap_releases(mdsc, s);
 		mutex_unlock(&s->s_mutex);
 		ceph_put_mds_session(s);
 
@@ -2779,6 +2808,12 @@ void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
 	drop_leases(mdsc);
 	ceph_flush_dirty_caps(mdsc);
 	wait_requests(mdsc);
+
+	/*
+	 * wait for reply handlers to drop their request refs and
+	 * their inode/dcache refs
+	 */
+	ceph_msgr_flush();
 }
 
 /*
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index d9936c4f121..952410c60d0 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -188,6 +188,7 @@ struct ceph_mds_request {
 	int r_old_inode_drop, r_old_inode_unless;
 
 	struct ceph_msg  *r_request;  /* original request */
+	int r_request_release_offset;
 	struct ceph_msg  *r_reply;
 	struct ceph_mds_reply_info_parsed r_reply_info;
 	int r_err;
@@ -322,6 +323,12 @@ static inline void ceph_mdsc_put_request(struct ceph_mds_request *req)
 	kref_put(&req->r_kref, ceph_mdsc_release_request);
 }
 
+extern int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+				 struct ceph_mds_session *session,
+				 int extra);
+extern void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+				   struct ceph_mds_session *session);
+
 extern void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc);
 
 extern char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index 64b8b1f7863..15167b2daa5 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -43,7 +43,8 @@ static void ceph_fault(struct ceph_connection *con);
  * nicely render a sockaddr as a string.
  */
 #define MAX_ADDR_STR 20
-static char addr_str[MAX_ADDR_STR][40];
+#define MAX_ADDR_STR_LEN 60
+static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN];
 static DEFINE_SPINLOCK(addr_str_lock);
 static int last_addr_str;
 
@@ -52,7 +53,6 @@ const char *pr_addr(const struct sockaddr_storage *ss)
 	int i;
 	char *s;
 	struct sockaddr_in *in4 = (void *)ss;
-	unsigned char *quad = (void *)&in4->sin_addr.s_addr;
 	struct sockaddr_in6 *in6 = (void *)ss;
 
 	spin_lock(&addr_str_lock);
@@ -64,25 +64,13 @@ const char *pr_addr(const struct sockaddr_storage *ss)
 
 	switch (ss->ss_family) {
 	case AF_INET:
-		sprintf(s, "%u.%u.%u.%u:%u",
-			(unsigned int)quad[0],
-			(unsigned int)quad[1],
-			(unsigned int)quad[2],
-			(unsigned int)quad[3],
-			(unsigned int)ntohs(in4->sin_port));
+		snprintf(s, MAX_ADDR_STR_LEN, "%pI4:%u", &in4->sin_addr,
+			 (unsigned int)ntohs(in4->sin_port));
 		break;
 
 	case AF_INET6:
-		sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
-			in6->sin6_addr.s6_addr16[0],
-			in6->sin6_addr.s6_addr16[1],
-			in6->sin6_addr.s6_addr16[2],
-			in6->sin6_addr.s6_addr16[3],
-			in6->sin6_addr.s6_addr16[4],
-			in6->sin6_addr.s6_addr16[5],
-			in6->sin6_addr.s6_addr16[6],
-			in6->sin6_addr.s6_addr16[7],
-			(unsigned int)ntohs(in6->sin6_port));
+		snprintf(s, MAX_ADDR_STR_LEN, "[%pI6c]:%u", &in6->sin6_addr,
+			 (unsigned int)ntohs(in6->sin6_port));
 		break;
 
 	default:
@@ -215,12 +203,13 @@ static void set_sock_callbacks(struct socket *sock,
  */
 static struct socket *ceph_tcp_connect(struct ceph_connection *con)
 {
-	struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+	struct sockaddr_storage *paddr = &con->peer_addr.in_addr;
 	struct socket *sock;
 	int ret;
 
 	BUG_ON(con->sock);
-	ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+	ret = sock_create_kern(con->peer_addr.in_addr.ss_family, SOCK_STREAM,
+			       IPPROTO_TCP, &sock);
 	if (ret)
 		return ERR_PTR(ret);
 	con->sock = sock;
@@ -234,7 +223,8 @@ static struct socket *ceph_tcp_connect(struct ceph_connection *con)
 
 	dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
 
-	ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+	ret = sock->ops->connect(sock, (struct sockaddr *)paddr, sizeof(*paddr),
+				 O_NONBLOCK);
 	if (ret == -EINPROGRESS) {
 		dout("connect %s EINPROGRESS sk_state = %u\n",
 		     pr_addr(&con->peer_addr.in_addr),
@@ -657,7 +647,7 @@ static void prepare_write_connect(struct ceph_messenger *msgr,
 	dout("prepare_write_connect %p cseq=%d gseq=%d proto=%d\n", con,
 	     con->connect_seq, global_seq, proto);
 
-	con->out_connect.features = CEPH_FEATURE_SUPPORTED_CLIENT;
+	con->out_connect.features = cpu_to_le64(CEPH_FEATURE_SUPPORTED_CLIENT);
 	con->out_connect.host_type = cpu_to_le32(CEPH_ENTITY_TYPE_CLIENT);
 	con->out_connect.connect_seq = cpu_to_le32(con->connect_seq);
 	con->out_connect.global_seq = cpu_to_le32(global_seq);
@@ -1009,19 +999,32 @@ int ceph_parse_ips(const char *c, const char *end,
 		struct sockaddr_in *in4 = (void *)ss;
 		struct sockaddr_in6 *in6 = (void *)ss;
 		int port;
+		char delim = ',';
+
+		if (*p == '[') {
+			delim = ']';
+			p++;
+		}
 
 		memset(ss, 0, sizeof(*ss));
 		if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
-			     ',', &ipend)) {
+			     delim, &ipend))
 			ss->ss_family = AF_INET;
-		} else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
-				    ',', &ipend)) {
+		else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+				  delim, &ipend))
 			ss->ss_family = AF_INET6;
-		} else {
+		else
 			goto bad;
-		}
 		p = ipend;
 
+		if (delim == ']') {
+			if (*p != ']') {
+				dout("missing matching ']'\n");
+				goto bad;
+			}
+			p++;
+		}
+
 		/* port? */
 		if (p < end && *p == ':') {
 			port = 0;
@@ -1055,7 +1058,7 @@ int ceph_parse_ips(const char *c, const char *end,
 	return 0;
 
 bad:
-	pr_err("parse_ips bad ip '%s'\n", c);
+	pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
 	return -EINVAL;
 }
 
@@ -1396,10 +1399,12 @@ static int read_partial_message(struct ceph_connection *con)
 	if (!con->in_msg) {
 		dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
 		     con->in_hdr.front_len, con->in_hdr.data_len);
+		skip = 0;
 		con->in_msg = ceph_alloc_msg(con, &con->in_hdr, &skip);
 		if (skip) {
 			/* skip this message */
 			dout("alloc_msg said skip message\n");
+			BUG_ON(con->in_msg);
 			con->in_base_pos = -front_len - middle_len - data_len -
 				sizeof(m->footer);
 			con->in_tag = CEPH_MSGR_TAG_READY;
@@ -2013,20 +2018,20 @@ void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg)
 {
 	mutex_lock(&con->mutex);
 	if (!list_empty(&msg->list_head)) {
-		dout("con_revoke %p msg %p\n", con, msg);
+		dout("con_revoke %p msg %p - was on queue\n", con, msg);
 		list_del_init(&msg->list_head);
 		ceph_msg_put(msg);
 		msg->hdr.seq = 0;
-		if (con->out_msg == msg) {
-			ceph_msg_put(con->out_msg);
-			con->out_msg = NULL;
-		}
+	}
+	if (con->out_msg == msg) {
+		dout("con_revoke %p msg %p - was sending\n", con, msg);
+		con->out_msg = NULL;
 		if (con->out_kvec_is_msg) {
 			con->out_skip = con->out_kvec_bytes;
 			con->out_kvec_is_msg = false;
 		}
-	} else {
-		dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+		ceph_msg_put(msg);
+		msg->hdr.seq = 0;
 	}
 	mutex_unlock(&con->mutex);
 }
diff --git a/fs/ceph/mon_client.c b/fs/ceph/mon_client.c
index 21c62e9b7d1..54fe01c5070 100644
--- a/fs/ceph/mon_client.c
+++ b/fs/ceph/mon_client.c
@@ -345,7 +345,7 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc,
 
 out:
 	mutex_unlock(&monc->mutex);
-	wake_up(&client->auth_wq);
+	wake_up_all(&client->auth_wq);
 }
 
 /*
@@ -400,6 +400,8 @@ static void release_generic_request(struct kref *kref)
 		ceph_msg_put(req->reply);
 	if (req->request)
 		ceph_msg_put(req->request);
+
+	kfree(req);
 }
 
 static void put_generic_request(struct ceph_mon_generic_request *req)
@@ -460,7 +462,7 @@ static void handle_statfs_reply(struct ceph_mon_client *monc,
 	}
 	mutex_unlock(&monc->mutex);
 	if (req) {
-		complete(&req->completion);
+		complete_all(&req->completion);
 		put_generic_request(req);
 	}
 	return;
@@ -716,14 +718,15 @@ static void handle_auth_reply(struct ceph_mon_client *monc,
 				     monc->m_auth->front_max);
 	if (ret < 0) {
 		monc->client->auth_err = ret;
-		wake_up(&monc->client->auth_wq);
+		wake_up_all(&monc->client->auth_wq);
 	} else if (ret > 0) {
 		__send_prepared_auth_request(monc, ret);
 	} else if (!was_auth && monc->auth->ops->is_authenticated(monc->auth)) {
 		dout("authenticated, starting session\n");
 
 		monc->client->msgr->inst.name.type = CEPH_ENTITY_TYPE_CLIENT;
-		monc->client->msgr->inst.name.num = monc->auth->global_id;
+		monc->client->msgr->inst.name.num =
+					cpu_to_le64(monc->auth->global_id);
 
 		__send_subscribe(monc);
 		__resend_generic_request(monc);
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index d25b4add85b..e3852234789 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -862,12 +862,12 @@ static void handle_reply(struct ceph_osd_client *osdc, struct ceph_msg *msg,
 	if (req->r_callback)
 		req->r_callback(req, msg);
 	else
-		complete(&req->r_completion);
+		complete_all(&req->r_completion);
 
 	if (flags & CEPH_OSD_FLAG_ONDISK) {
 		if (req->r_safe_callback)
 			req->r_safe_callback(req, msg);
-		complete(&req->r_safe_completion);  /* fsync waiter */
+		complete_all(&req->r_safe_completion);  /* fsync waiter */
 	}
 
 done:
@@ -1083,7 +1083,7 @@ done:
 	if (newmap)
 		kick_requests(osdc, NULL);
 	up_read(&osdc->map_sem);
-	wake_up(&osdc->client->auth_wq);
+	wake_up_all(&osdc->client->auth_wq);
 	return;
 
 bad:
@@ -1344,7 +1344,7 @@ static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
 	int type = le16_to_cpu(msg->hdr.type);
 
 	if (!osd)
-		return;
+		goto out;
 	osdc = osd->o_osdc;
 
 	switch (type) {
@@ -1359,6 +1359,7 @@ static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
 		pr_err("received unknown message type %d %s\n", type,
 		       ceph_msg_type_name(type));
 	}
+out:
 	ceph_msg_put(msg);
 }
 
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
index ddc656fb5c0..416d46adbf8 100644
--- a/fs/ceph/osdmap.c
+++ b/fs/ceph/osdmap.c
@@ -568,6 +568,7 @@ struct ceph_osdmap *osdmap_decode(void **p, void *end)
 		if (ev > CEPH_PG_POOL_VERSION) {
 			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
 				   ev, CEPH_PG_POOL_VERSION);
+			kfree(pi);
 			goto bad;
 		}
 		__decode_pool(p, pi);
@@ -707,6 +708,7 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
 		newcrush = crush_decode(*p, min(*p+len, end));
 		if (IS_ERR(newcrush))
 			return ERR_CAST(newcrush);
+		*p += len;
 	}
 
 	/* new flags? */
@@ -829,12 +831,13 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
 		/* remove any? */
 		while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
 						node)->pgid, pgid) <= 0) {
-			struct rb_node *cur = rbp;
+			struct ceph_pg_mapping *cur =
+				rb_entry(rbp, struct ceph_pg_mapping, node);
+			
 			rbp = rb_next(rbp);
-			dout(" removed pg_temp %llx\n",
-			     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
-					       node)->pgid);
-			rb_erase(cur, &map->pg_temp);
+			dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+			rb_erase(&cur->node, &map->pg_temp);
+			kfree(cur);
 		}
 
 		if (pglen) {
@@ -850,19 +853,22 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
 			for (j = 0; j < pglen; j++)
 				pg->osds[j] = ceph_decode_32(p);
 			err = __insert_pg_mapping(pg, &map->pg_temp);
-			if (err)
+			if (err) {
+				kfree(pg);
 				goto bad;
+			}
 			dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
 			     pglen);
 		}
 	}
 	while (rbp) {
-		struct rb_node *cur = rbp;
+		struct ceph_pg_mapping *cur =
+			rb_entry(rbp, struct ceph_pg_mapping, node);
+
 		rbp = rb_next(rbp);
-		dout(" removed pg_temp %llx\n",
-		     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
-				       node)->pgid);
-		rb_erase(cur, &map->pg_temp);
+		dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+		rb_erase(&cur->node, &map->pg_temp);
+		kfree(cur);
 	}
 
 	/* ignore the rest */
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 4e0bee240b9..fa87f51e38e 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -89,7 +89,7 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
 
 	buf->f_files = le64_to_cpu(st.num_objects);
 	buf->f_ffree = -1;
-	buf->f_namelen = PATH_MAX;
+	buf->f_namelen = NAME_MAX;
 	buf->f_frsize = PAGE_CACHE_SIZE;
 
 	/* leave fsid little-endian, regardless of host endianness */
@@ -926,7 +926,7 @@ static int ceph_compare_super(struct super_block *sb, void *data)
 /*
  * construct our own bdi so we can control readahead, etc.
  */
-static atomic_long_t bdi_seq = ATOMIC_INIT(0);
+static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
 
 static int ceph_register_bdi(struct super_block *sb, struct ceph_client *client)
 {
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 80f35259680..5739fd7f88b 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -131,6 +131,15 @@ config CIFS_DFS_UPCALL
 	    IP addresses) which is needed for implicit mounts of DFS junction
 	    points. If unsure, say N.
 
+config CIFS_FSCACHE
+	  bool "Provide CIFS client caching support (EXPERIMENTAL)"
+	  depends on EXPERIMENTAL
+	  depends on CIFS=m && FSCACHE || CIFS=y && FSCACHE=y
+	  help
+	    Makes CIFS FS-Cache capable. Say Y here if you want your CIFS data
+	    to be cached locally on disk through the general filesystem cache
+	    manager. If unsure, say N.
+
 config CIFS_EXPERIMENTAL
 	  bool "CIFS Experimental Features (EXPERIMENTAL)"
 	  depends on CIFS && EXPERIMENTAL
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index 9948c0030e8..adefa60a9bd 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -11,3 +11,5 @@ cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
 cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
 
 cifs-$(CONFIG_CIFS_DFS_UPCALL) += dns_resolve.o cifs_dfs_ref.o
+
+cifs-$(CONFIG_CIFS_FSCACHE) += fscache.o cache.o
diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c
new file mode 100644
index 00000000000..224d7bbd1fc
--- /dev/null
+++ b/fs/cifs/cache.c
@@ -0,0 +1,331 @@
+/*
+ *   fs/cifs/cache.c - CIFS filesystem cache index structure definitions
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Authors(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include "fscache.h"
+#include "cifs_debug.h"
+
+/*
+ * CIFS filesystem definition for FS-Cache
+ */
+struct fscache_netfs cifs_fscache_netfs = {
+	.name = "cifs",
+	.version = 0,
+};
+
+/*
+ * Register CIFS for caching with FS-Cache
+ */
+int cifs_fscache_register(void)
+{
+	return fscache_register_netfs(&cifs_fscache_netfs);
+}
+
+/*
+ * Unregister CIFS for caching
+ */
+void cifs_fscache_unregister(void)
+{
+	fscache_unregister_netfs(&cifs_fscache_netfs);
+}
+
+/*
+ * Key layout of CIFS server cache index object
+ */
+struct cifs_server_key {
+	uint16_t	family;		/* address family */
+	uint16_t	port;		/* IP port */
+	union {
+		struct in_addr	ipv4_addr;
+		struct in6_addr	ipv6_addr;
+	} addr[0];
+};
+
+/*
+ * Server object keyed by {IPaddress,port,family} tuple
+ */
+static uint16_t cifs_server_get_key(const void *cookie_netfs_data,
+				   void *buffer, uint16_t maxbuf)
+{
+	const struct TCP_Server_Info *server = cookie_netfs_data;
+	const struct sockaddr *sa = (struct sockaddr *) &server->addr.sockAddr;
+	struct cifs_server_key *key = buffer;
+	uint16_t key_len = sizeof(struct cifs_server_key);
+
+	memset(key, 0, key_len);
+
+	/*
+	 * Should not be a problem as sin_family/sin6_family overlays
+	 * sa_family field
+	 */
+	switch (sa->sa_family) {
+	case AF_INET:
+		key->family = server->addr.sockAddr.sin_family;
+		key->port = server->addr.sockAddr.sin_port;
+		key->addr[0].ipv4_addr = server->addr.sockAddr.sin_addr;
+		key_len += sizeof(key->addr[0].ipv4_addr);
+		break;
+
+	case AF_INET6:
+		key->family = server->addr.sockAddr6.sin6_family;
+		key->port = server->addr.sockAddr6.sin6_port;
+		key->addr[0].ipv6_addr = server->addr.sockAddr6.sin6_addr;
+		key_len += sizeof(key->addr[0].ipv6_addr);
+		break;
+
+	default:
+		cERROR(1, "CIFS: Unknown network family '%d'", sa->sa_family);
+		key_len = 0;
+		break;
+	}
+
+	return key_len;
+}
+
+/*
+ * Server object for FS-Cache
+ */
+const struct fscache_cookie_def cifs_fscache_server_index_def = {
+	.name = "CIFS.server",
+	.type = FSCACHE_COOKIE_TYPE_INDEX,
+	.get_key = cifs_server_get_key,
+};
+
+/*
+ * Auxiliary data attached to CIFS superblock within the cache
+ */
+struct cifs_fscache_super_auxdata {
+	u64	resource_id;		/* unique server resource id */
+};
+
+static char *extract_sharename(const char *treename)
+{
+	const char *src;
+	char *delim, *dst;
+	int len;
+
+	/* skip double chars at the beginning */
+	src = treename + 2;
+
+	/* share name is always preceded by '\\' now */
+	delim = strchr(src, '\\');
+	if (!delim)
+		return ERR_PTR(-EINVAL);
+	delim++;
+	len = strlen(delim);
+
+	/* caller has to free the memory */
+	dst = kstrndup(delim, len, GFP_KERNEL);
+	if (!dst)
+		return ERR_PTR(-ENOMEM);
+
+	return dst;
+}
+
+/*
+ * Superblock object currently keyed by share name
+ */
+static uint16_t cifs_super_get_key(const void *cookie_netfs_data, void *buffer,
+				   uint16_t maxbuf)
+{
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+	char *sharename;
+	uint16_t len;
+
+	sharename = extract_sharename(tcon->treeName);
+	if (IS_ERR(sharename)) {
+		cFYI(1, "CIFS: couldn't extract sharename\n");
+		sharename = NULL;
+		return 0;
+	}
+
+	len = strlen(sharename);
+	if (len > maxbuf)
+		return 0;
+
+	memcpy(buffer, sharename, len);
+
+	kfree(sharename);
+
+	return len;
+}
+
+static uint16_t
+cifs_fscache_super_get_aux(const void *cookie_netfs_data, void *buffer,
+			   uint16_t maxbuf)
+{
+	struct cifs_fscache_super_auxdata auxdata;
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.resource_id = tcon->resource_id;
+
+	if (maxbuf > sizeof(auxdata))
+		maxbuf = sizeof(auxdata);
+
+	memcpy(buffer, &auxdata, maxbuf);
+
+	return maxbuf;
+}
+
+static enum
+fscache_checkaux cifs_fscache_super_check_aux(void *cookie_netfs_data,
+					      const void *data,
+					      uint16_t datalen)
+{
+	struct cifs_fscache_super_auxdata auxdata;
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+
+	if (datalen != sizeof(auxdata))
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.resource_id = tcon->resource_id;
+
+	if (memcmp(data, &auxdata, datalen) != 0)
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	return FSCACHE_CHECKAUX_OKAY;
+}
+
+/*
+ * Superblock object for FS-Cache
+ */
+const struct fscache_cookie_def cifs_fscache_super_index_def = {
+	.name = "CIFS.super",
+	.type = FSCACHE_COOKIE_TYPE_INDEX,
+	.get_key = cifs_super_get_key,
+	.get_aux = cifs_fscache_super_get_aux,
+	.check_aux = cifs_fscache_super_check_aux,
+};
+
+/*
+ * Auxiliary data attached to CIFS inode within the cache
+ */
+struct cifs_fscache_inode_auxdata {
+	struct timespec	last_write_time;
+	struct timespec	last_change_time;
+	u64		eof;
+};
+
+static uint16_t cifs_fscache_inode_get_key(const void *cookie_netfs_data,
+					   void *buffer, uint16_t maxbuf)
+{
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+	uint16_t keylen;
+
+	/* use the UniqueId as the key */
+	keylen = sizeof(cifsi->uniqueid);
+	if (keylen > maxbuf)
+		keylen = 0;
+	else
+		memcpy(buffer, &cifsi->uniqueid, keylen);
+
+	return keylen;
+}
+
+static void
+cifs_fscache_inode_get_attr(const void *cookie_netfs_data, uint64_t *size)
+{
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	*size = cifsi->vfs_inode.i_size;
+}
+
+static uint16_t
+cifs_fscache_inode_get_aux(const void *cookie_netfs_data, void *buffer,
+			   uint16_t maxbuf)
+{
+	struct cifs_fscache_inode_auxdata auxdata;
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.eof = cifsi->server_eof;
+	auxdata.last_write_time = cifsi->vfs_inode.i_mtime;
+	auxdata.last_change_time = cifsi->vfs_inode.i_ctime;
+
+	if (maxbuf > sizeof(auxdata))
+		maxbuf = sizeof(auxdata);
+
+	memcpy(buffer, &auxdata, maxbuf);
+
+	return maxbuf;
+}
+
+static enum
+fscache_checkaux cifs_fscache_inode_check_aux(void *cookie_netfs_data,
+					      const void *data,
+					      uint16_t datalen)
+{
+	struct cifs_fscache_inode_auxdata auxdata;
+	struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	if (datalen != sizeof(auxdata))
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.eof = cifsi->server_eof;
+	auxdata.last_write_time = cifsi->vfs_inode.i_mtime;
+	auxdata.last_change_time = cifsi->vfs_inode.i_ctime;
+
+	if (memcmp(data, &auxdata, datalen) != 0)
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	return FSCACHE_CHECKAUX_OKAY;
+}
+
+static void cifs_fscache_inode_now_uncached(void *cookie_netfs_data)
+{
+	struct cifsInodeInfo *cifsi = cookie_netfs_data;
+	struct pagevec pvec;
+	pgoff_t first;
+	int loop, nr_pages;
+
+	pagevec_init(&pvec, 0);
+	first = 0;
+
+	cFYI(1, "cifs inode 0x%p now uncached", cifsi);
+
+	for (;;) {
+		nr_pages = pagevec_lookup(&pvec,
+					  cifsi->vfs_inode.i_mapping, first,
+					  PAGEVEC_SIZE - pagevec_count(&pvec));
+		if (!nr_pages)
+			break;
+
+		for (loop = 0; loop < nr_pages; loop++)
+			ClearPageFsCache(pvec.pages[loop]);
+
+		first = pvec.pages[nr_pages - 1]->index + 1;
+
+		pvec.nr = nr_pages;
+		pagevec_release(&pvec);
+		cond_resched();
+	}
+}
+
+const struct fscache_cookie_def cifs_fscache_inode_object_def = {
+	.name		= "CIFS.uniqueid",
+	.type		= FSCACHE_COOKIE_TYPE_DATAFILE,
+	.get_key	= cifs_fscache_inode_get_key,
+	.get_attr	= cifs_fscache_inode_get_attr,
+	.get_aux	= cifs_fscache_inode_get_aux,
+	.check_aux	= cifs_fscache_inode_check_aux,
+	.now_uncached	= cifs_fscache_inode_now_uncached,
+};
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index ac19a6f3dae..dc1ed50ea06 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -230,28 +230,22 @@ compose_mount_options_err:
 	goto compose_mount_options_out;
 }
 
-
-static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent,
-		struct dentry *dentry, const struct dfs_info3_param *ref)
+/**
+ * cifs_dfs_do_refmount - mounts specified path using provided refferal
+ * @cifs_sb:		parent/root superblock
+ * @fullpath:		full path in UNC format
+ * @ref:		server's referral
+ */
+static struct vfsmount *cifs_dfs_do_refmount(struct cifs_sb_info *cifs_sb,
+		const char *fullpath, const struct dfs_info3_param *ref)
 {
-	struct cifs_sb_info *cifs_sb;
 	struct vfsmount *mnt;
 	char *mountdata;
 	char *devname = NULL;
-	char *fullpath;
-
-	cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
-	/*
-	 * this function gives us a path with a double backslash prefix. We
-	 * require a single backslash for DFS.
-	 */
-	fullpath = build_path_from_dentry(dentry);
-	if (!fullpath)
-		return ERR_PTR(-ENOMEM);
 
+	/* strip first '\' from fullpath */
 	mountdata = cifs_compose_mount_options(cifs_sb->mountdata,
 			fullpath + 1, ref, &devname);
-	kfree(fullpath);
 
 	if (IS_ERR(mountdata))
 		return (struct vfsmount *)mountdata;
@@ -357,8 +351,8 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 			rc = -EINVAL;
 			goto out_err;
 		}
-		mnt = cifs_dfs_do_refmount(nd->path.mnt,
-				nd->path.dentry, referrals + i);
+		mnt = cifs_dfs_do_refmount(cifs_sb,
+				full_path, referrals + i);
 		cFYI(1, "%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
 					referrals[i].node_name, mnt);
 
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 246a167cb91..9e771450c3b 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -35,6 +35,7 @@
 #define CIFS_MOUNT_DYNPERM      0x1000 /* allow in-memory only mode setting   */
 #define CIFS_MOUNT_NOPOSIXBRL   0x2000 /* mandatory not posix byte range lock */
 #define CIFS_MOUNT_NOSSYNC      0x4000 /* don't do slow SMBflush on every sync*/
+#define CIFS_MOUNT_FSCACHE	0x8000 /* local caching enabled */
 
 struct cifs_sb_info {
 	struct cifsTconInfo *tcon;	/* primary mount */
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 379bd7d9c05..6effccff85a 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -144,6 +144,9 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
 
 	dp = description + strlen(description);
+	sprintf(dp, ";creduid=0x%x", sesInfo->cred_uid);
+
+	dp = description + strlen(description);
 	sprintf(dp, ";user=%s", sesInfo->userName);
 
 	dp = description + strlen(description);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 78c02eb4cb1..8a2cf129e53 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -47,6 +47,7 @@
 #include <linux/key-type.h>
 #include "dns_resolve.h"
 #include "cifs_spnego.h"
+#include "fscache.h"
 #define CIFS_MAGIC_NUMBER 0xFF534D42	/* the first four bytes of SMB PDUs */
 
 int cifsFYI = 0;
@@ -329,6 +330,12 @@ cifs_destroy_inode(struct inode *inode)
 }
 
 static void
+cifs_clear_inode(struct inode *inode)
+{
+	cifs_fscache_release_inode_cookie(inode);
+}
+
+static void
 cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
 {
 	seq_printf(s, ",addr=");
@@ -473,14 +480,25 @@ static int cifs_remount(struct super_block *sb, int *flags, char *data)
 	return 0;
 }
 
+void cifs_drop_inode(struct inode *inode)
+{
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+		return generic_drop_inode(inode);
+
+	return generic_delete_inode(inode);
+}
+
 static const struct super_operations cifs_super_ops = {
 	.put_super = cifs_put_super,
 	.statfs = cifs_statfs,
 	.alloc_inode = cifs_alloc_inode,
 	.destroy_inode = cifs_destroy_inode,
-/*	.drop_inode	    = generic_delete_inode,
-	.delete_inode	= cifs_delete_inode,  */  /* Do not need above two
-	functions unless later we add lazy close of inodes or unless the
+	.drop_inode	= cifs_drop_inode,
+	.clear_inode	= cifs_clear_inode,
+/*	.delete_inode	= cifs_delete_inode,  */  /* Do not need above
+	function unless later we add lazy close of inodes or unless the
 	kernel forgets to call us with the same number of releases (closes)
 	as opens */
 	.show_options = cifs_show_options,
@@ -892,6 +910,10 @@ init_cifs(void)
 		cFYI(1, "cifs_max_pending set to max of 256");
 	}
 
+	rc = cifs_fscache_register();
+	if (rc)
+		goto out;
+
 	rc = cifs_init_inodecache();
 	if (rc)
 		goto out_clean_proc;
@@ -913,7 +935,7 @@ init_cifs(void)
 		goto out_unregister_filesystem;
 #endif
 #ifdef CONFIG_CIFS_DFS_UPCALL
-	rc = register_key_type(&key_type_dns_resolver);
+	rc = cifs_init_dns_resolver();
 	if (rc)
 		goto out_unregister_key_type;
 #endif
@@ -925,7 +947,7 @@ init_cifs(void)
 
  out_unregister_resolver_key:
 #ifdef CONFIG_CIFS_DFS_UPCALL
-	unregister_key_type(&key_type_dns_resolver);
+	cifs_exit_dns_resolver();
  out_unregister_key_type:
 #endif
 #ifdef CONFIG_CIFS_UPCALL
@@ -941,6 +963,8 @@ init_cifs(void)
 	cifs_destroy_inodecache();
  out_clean_proc:
 	cifs_proc_clean();
+	cifs_fscache_unregister();
+ out:
 	return rc;
 }
 
@@ -949,9 +973,10 @@ exit_cifs(void)
 {
 	cFYI(DBG2, "exit_cifs");
 	cifs_proc_clean();
+	cifs_fscache_unregister();
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	cifs_dfs_release_automount_timer();
-	unregister_key_type(&key_type_dns_resolver);
+	cifs_exit_dns_resolver();
 #endif
 #ifdef CONFIG_CIFS_UPCALL
 	unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index a7eb65c84b1..d82f5fb4761 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -114,5 +114,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.64"
+#define CIFS_VERSION   "1.65"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a88479ceaad..59906146ad3 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -16,6 +16,9 @@
  *   the GNU Lesser General Public License for more details.
  *
  */
+#ifndef _CIFS_GLOB_H
+#define _CIFS_GLOB_H
+
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/slab.h>
@@ -34,7 +37,7 @@
 #define MAX_SHARE_SIZE  64	/* used to be 20, this should still be enough */
 #define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
 				   termination then *2 for unicode versions */
-#define MAX_PASSWORD_SIZE 16
+#define MAX_PASSWORD_SIZE 512  /* max for windows seems to be 256 wide chars */
 
 #define CIFS_MIN_RCV_POOL 4
 
@@ -80,8 +83,7 @@ enum statusEnum {
 };
 
 enum securityEnum {
-	PLAINTXT = 0, 		/* Legacy with Plaintext passwords */
-	LANMAN,			/* Legacy LANMAN auth */
+	LANMAN = 0,			/* Legacy LANMAN auth */
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
@@ -142,7 +144,6 @@ struct TCP_Server_Info {
 	struct list_head pending_mid_q;
 	void *Server_NlsInfo;	/* BB - placeholder for future NLS info  */
 	unsigned short server_codepage;	/* codepage for the server    */
-	unsigned long ip_address;	/* IP addr for the server if known */
 	enum protocolEnum protocolType;
 	char versionMajor;
 	char versionMinor;
@@ -190,19 +191,9 @@ struct TCP_Server_Info {
 	bool	sec_mskerberos;		/* supports legacy MS Kerberos */
 	bool	sec_kerberosu2u;	/* supports U2U Kerberos */
 	bool	sec_ntlmssp;		/* supports NTLMSSP */
-};
-
-/*
- * The following is our shortcut to user information.  We surface the uid,
- * and name. We always get the password on the fly in case it
- * has changed. We also hang a list of sessions owned by this user off here.
- */
-struct cifsUidInfo {
-	struct list_head userList;
-	struct list_head sessionList; /* SMB sessions for this user */
-	uid_t linux_uid;
-	char user[MAX_USERNAME_SIZE + 1];	/* ascii name of user */
-	/* BB may need ptr or callback for PAM or WinBind info */
+#ifdef CONFIG_CIFS_FSCACHE
+	struct fscache_cookie   *fscache; /* client index cache cookie */
+#endif
 };
 
 /*
@@ -212,9 +203,6 @@ struct cifsSesInfo {
 	struct list_head smb_ses_list;
 	struct list_head tcon_list;
 	struct mutex session_mutex;
-#if 0
-	struct cifsUidInfo *uidInfo;	/* pointer to user info */
-#endif
 	struct TCP_Server_Info *server;	/* pointer to server info */
 	int ses_count;		/* reference counter */
 	enum statusEnum status;
@@ -226,7 +214,8 @@ struct cifsSesInfo {
 	char *serverNOS;	/* name of network operating system of server */
 	char *serverDomain;	/* security realm of server */
 	int Suid;		/* remote smb uid  */
-	uid_t linux_uid;        /* local Linux uid */
+	uid_t linux_uid;        /* overriding owner of files on the mount */
+	uid_t cred_uid;		/* owner of credentials */
 	int capabilities;
 	char serverName[SERVER_NAME_LEN_WITH_NULL * 2];	/* BB make bigger for
 				TCP names - will ipv6 and sctp addresses fit? */
@@ -311,6 +300,10 @@ struct cifsTconInfo {
 	bool local_lease:1; /* check leases (only) on local system not remote */
 	bool broken_posix_open; /* e.g. Samba server versions < 3.3.2, 3.2.9 */
 	bool need_reconnect:1; /* connection reset, tid now invalid */
+#ifdef CONFIG_CIFS_FSCACHE
+	u64 resource_id;		/* server resource id */
+	struct fscache_cookie *fscache;	/* cookie for share */
+#endif
 	/* BB add field for back pointer to sb struct(s)? */
 };
 
@@ -398,6 +391,9 @@ struct cifsInodeInfo {
 	bool invalid_mapping:1;		/* pagecache is invalid */
 	u64  server_eof;		/* current file size on server */
 	u64  uniqueid;			/* server inode number */
+#ifdef CONFIG_CIFS_FSCACHE
+	struct fscache_cookie *fscache;
+#endif
 	struct inode vfs_inode;
 };
 
@@ -733,3 +729,5 @@ GLOBAL_EXTERN unsigned int cifs_min_small;  /* min size of small buf pool */
 GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 
 extern const struct slow_work_ops cifs_oplock_break_ops;
+
+#endif	/* _CIFS_GLOB_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index fb1657e0fdb..2eaebbd3113 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -86,7 +86,9 @@ extern unsigned int smbCalcSize(struct smb_hdr *ptr);
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			struct TCP_Server_Info *server);
-extern int cifs_convert_address(char *src, void *dst);
+extern int cifs_convert_address(struct sockaddr *dst, char *src);
+extern int cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+				unsigned short int port);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
 			    const struct cifsTconInfo *, int /* length of
@@ -106,7 +108,6 @@ extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
 				__u16 fileHandle, struct file *file,
 				struct vfsmount *mnt, unsigned int oflags);
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
-				struct vfsmount *mnt,
 				struct super_block *sb,
 				int mode, int oflags,
 				__u32 *poplock, __u16 *pnetfid, int xid);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2208f06e4c4..2a43a0aca96 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -48,6 +48,7 @@
 #include "nterr.h"
 #include "rfc1002pdu.h"
 #include "cn_cifs.h"
+#include "fscache.h"
 
 #define CIFS_PORT 445
 #define RFC1001_PORT 139
@@ -66,6 +67,7 @@ struct smb_vol {
 	char *iocharset;  /* local code page for mapping to and from Unicode */
 	char source_rfc1001_name[16]; /* netbios name of client */
 	char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
+	uid_t cred_uid;
 	uid_t linux_uid;
 	gid_t linux_gid;
 	mode_t file_mode;
@@ -97,6 +99,7 @@ struct smb_vol {
 	bool noblocksnd:1;
 	bool noautotune:1;
 	bool nostrictsync:1; /* do not force expensive SMBflush on every sync */
+	bool fsc:1;	/* enable fscache */
 	unsigned int rsize;
 	unsigned int wsize;
 	bool sockopt_tcp_nodelay:1;
@@ -830,7 +833,8 @@ cifs_parse_mount_options(char *options, const char *devname,
 	/* null target name indicates to use *SMBSERVR default called name
 	   if we end up sending RFC1001 session initialize */
 	vol->target_rfc1001_name[0] = 0;
-	vol->linux_uid = current_uid();  /* use current_euid() instead? */
+	vol->cred_uid = current_uid();
+	vol->linux_uid = current_uid();
 	vol->linux_gid = current_gid();
 
 	/* default to only allowing write access to owner of the mount */
@@ -1257,6 +1261,12 @@ cifs_parse_mount_options(char *options, const char *devname,
 		} else if ((strnicmp(data, "nocase", 6) == 0) ||
 			   (strnicmp(data, "ignorecase", 10)  == 0)) {
 			vol->nocase = 1;
+		} else if (strnicmp(data, "mand", 4) == 0) {
+			/* ignore */
+		} else if (strnicmp(data, "nomand", 6) == 0) {
+			/* ignore */
+		} else if (strnicmp(data, "_netdev", 7) == 0) {
+			/* ignore */
 		} else if (strnicmp(data, "brl", 3) == 0) {
 			vol->nobrl =  0;
 		} else if ((strnicmp(data, "nobrl", 5) == 0) ||
@@ -1331,6 +1341,8 @@ cifs_parse_mount_options(char *options, const char *devname,
 			printk(KERN_WARNING "CIFS: Mount option noac not "
 				"supported. Instead set "
 				"/proc/fs/cifs/LookupCacheEnabled to 0\n");
+		} else if (strnicmp(data, "fsc", 3) == 0) {
+			vol->fsc = true;
 		} else
 			printk(KERN_WARNING "CIFS: Unknown mount option %s\n",
 						data);
@@ -1380,18 +1392,92 @@ cifs_parse_mount_options(char *options, const char *devname,
 	return 0;
 }
 
+static bool
+match_address(struct TCP_Server_Info *server, struct sockaddr *addr)
+{
+	struct sockaddr_in *addr4 = (struct sockaddr_in *)addr;
+	struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *)addr;
+
+	switch (addr->sa_family) {
+	case AF_INET:
+		if (addr4->sin_addr.s_addr !=
+		    server->addr.sockAddr.sin_addr.s_addr)
+			return false;
+		if (addr4->sin_port &&
+		    addr4->sin_port != server->addr.sockAddr.sin_port)
+			return false;
+		break;
+	case AF_INET6:
+		if (!ipv6_addr_equal(&addr6->sin6_addr,
+				     &server->addr.sockAddr6.sin6_addr))
+			return false;
+		if (addr6->sin6_scope_id !=
+		    server->addr.sockAddr6.sin6_scope_id)
+			return false;
+		if (addr6->sin6_port &&
+		    addr6->sin6_port != server->addr.sockAddr6.sin6_port)
+			return false;
+		break;
+	}
+
+	return true;
+}
+
+static bool
+match_security(struct TCP_Server_Info *server, struct smb_vol *vol)
+{
+	unsigned int secFlags;
+
+	if (vol->secFlg & (~(CIFSSEC_MUST_SIGN | CIFSSEC_MUST_SEAL)))
+		secFlags = vol->secFlg;
+	else
+		secFlags = global_secflags | vol->secFlg;
+
+	switch (server->secType) {
+	case LANMAN:
+		if (!(secFlags & (CIFSSEC_MAY_LANMAN|CIFSSEC_MAY_PLNTXT)))
+			return false;
+		break;
+	case NTLMv2:
+		if (!(secFlags & CIFSSEC_MAY_NTLMV2))
+			return false;
+		break;
+	case NTLM:
+		if (!(secFlags & CIFSSEC_MAY_NTLM))
+			return false;
+		break;
+	case Kerberos:
+		if (!(secFlags & CIFSSEC_MAY_KRB5))
+			return false;
+		break;
+	case RawNTLMSSP:
+		if (!(secFlags & CIFSSEC_MAY_NTLMSSP))
+			return false;
+		break;
+	default:
+		/* shouldn't happen */
+		return false;
+	}
+
+	/* now check if signing mode is acceptible */
+	if ((secFlags & CIFSSEC_MAY_SIGN) == 0 &&
+	    (server->secMode & SECMODE_SIGN_REQUIRED))
+			return false;
+	else if (((secFlags & CIFSSEC_MUST_SIGN) == CIFSSEC_MUST_SIGN) &&
+		 (server->secMode &
+		  (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED)) == 0)
+			return false;
+
+	return true;
+}
+
 static struct TCP_Server_Info *
-cifs_find_tcp_session(struct sockaddr_storage *addr, unsigned short int port)
+cifs_find_tcp_session(struct sockaddr *addr, struct smb_vol *vol)
 {
-	struct list_head *tmp;
 	struct TCP_Server_Info *server;
-	struct sockaddr_in *addr4 = (struct sockaddr_in *) addr;
-	struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr;
 
 	write_lock(&cifs_tcp_ses_lock);
-	list_for_each(tmp, &cifs_tcp_ses_list) {
-		server = list_entry(tmp, struct TCP_Server_Info,
-				    tcp_ses_list);
+	list_for_each_entry(server, &cifs_tcp_ses_list, tcp_ses_list) {
 		/*
 		 * the demux thread can exit on its own while still in CifsNew
 		 * so don't accept any sockets in that state. Since the
@@ -1401,37 +1487,11 @@ cifs_find_tcp_session(struct sockaddr_storage *addr, unsigned short int port)
 		if (server->tcpStatus == CifsNew)
 			continue;
 
-		switch (addr->ss_family) {
-		case AF_INET:
-			if (addr4->sin_addr.s_addr ==
-			    server->addr.sockAddr.sin_addr.s_addr) {
-				addr4->sin_port = htons(port);
-				/* user overrode default port? */
-				if (addr4->sin_port) {
-					if (addr4->sin_port !=
-					    server->addr.sockAddr.sin_port)
-						continue;
-				}
-				break;
-			} else
-				continue;
+		if (!match_address(server, addr))
+			continue;
 
-		case AF_INET6:
-			if (ipv6_addr_equal(&addr6->sin6_addr,
-			    &server->addr.sockAddr6.sin6_addr) &&
-			    (addr6->sin6_scope_id ==
-			    server->addr.sockAddr6.sin6_scope_id)) {
-				addr6->sin6_port = htons(port);
-				/* user overrode default port? */
-				if (addr6->sin6_port) {
-					if (addr6->sin6_port !=
-					   server->addr.sockAddr6.sin6_port)
-						continue;
-				}
-				break;
-			} else
-				continue;
-		}
+		if (!match_security(server, vol))
+			continue;
 
 		++server->srv_count;
 		write_unlock(&cifs_tcp_ses_lock);
@@ -1460,6 +1520,8 @@ cifs_put_tcp_session(struct TCP_Server_Info *server)
 	server->tcpStatus = CifsExiting;
 	spin_unlock(&GlobalMid_Lock);
 
+	cifs_fscache_release_client_cookie(server);
+
 	task = xchg(&server->tsk, NULL);
 	if (task)
 		force_sig(SIGKILL, task);
@@ -1479,7 +1541,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 	cFYI(1, "UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip);
 
 	if (volume_info->UNCip && volume_info->UNC) {
-		rc = cifs_convert_address(volume_info->UNCip, &addr);
+		rc = cifs_fill_sockaddr((struct sockaddr *)&addr,
+					volume_info->UNCip,
+					volume_info->port);
 		if (!rc) {
 			/* we failed translating address */
 			rc = -EINVAL;
@@ -1499,7 +1563,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 	}
 
 	/* see if we already have a matching tcp_ses */
-	tcp_ses = cifs_find_tcp_session(&addr, volume_info->port);
+	tcp_ses = cifs_find_tcp_session((struct sockaddr *)&addr, volume_info);
 	if (tcp_ses)
 		return tcp_ses;
 
@@ -1543,12 +1607,10 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 		cFYI(1, "attempting ipv6 connect");
 		/* BB should we allow ipv6 on port 139? */
 		/* other OS never observed in Wild doing 139 with v6 */
-		sin_server6->sin6_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
 			sizeof(struct sockaddr_in6));
 		rc = ipv6_connect(tcp_ses);
 	} else {
-		sin_server->sin_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr, sin_server,
 			sizeof(struct sockaddr_in));
 		rc = ipv4_connect(tcp_ses);
@@ -1577,6 +1639,8 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 	list_add(&tcp_ses->tcp_ses_list, &cifs_tcp_ses_list);
 	write_unlock(&cifs_tcp_ses_lock);
 
+	cifs_fscache_get_client_cookie(tcp_ses);
+
 	return tcp_ses;
 
 out_err:
@@ -1591,17 +1655,27 @@ out_err:
 }
 
 static struct cifsSesInfo *
-cifs_find_smb_ses(struct TCP_Server_Info *server, char *username)
+cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol)
 {
-	struct list_head *tmp;
 	struct cifsSesInfo *ses;
 
 	write_lock(&cifs_tcp_ses_lock);
-	list_for_each(tmp, &server->smb_ses_list) {
-		ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
-		if (strncmp(ses->userName, username, MAX_USERNAME_SIZE))
-			continue;
-
+	list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) {
+		switch (server->secType) {
+		case Kerberos:
+			if (vol->cred_uid != ses->cred_uid)
+				continue;
+			break;
+		default:
+			/* anything else takes username/password */
+			if (strncmp(ses->userName, vol->username,
+				    MAX_USERNAME_SIZE))
+				continue;
+			if (strlen(vol->username) != 0 &&
+			    strncmp(ses->password, vol->password,
+				    MAX_PASSWORD_SIZE))
+				continue;
+		}
 		++ses->ses_count;
 		write_unlock(&cifs_tcp_ses_lock);
 		return ses;
@@ -1643,7 +1717,7 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 
 	xid = GetXid();
 
-	ses = cifs_find_smb_ses(server, volume_info->username);
+	ses = cifs_find_smb_ses(server, volume_info);
 	if (ses) {
 		cFYI(1, "Existing smb sess found (status=%d)", ses->status);
 
@@ -1706,6 +1780,7 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 		if (ses->domainName)
 			strcpy(ses->domainName, volume_info->domainname);
 	}
+	ses->cred_uid = volume_info->cred_uid;
 	ses->linux_uid = volume_info->linux_uid;
 	ses->overrideSecFlg = volume_info->secFlg;
 
@@ -1773,6 +1848,7 @@ cifs_put_tcon(struct cifsTconInfo *tcon)
 	CIFSSMBTDis(xid, tcon);
 	_FreeXid(xid);
 
+	cifs_fscache_release_super_cookie(tcon);
 	tconInfoFree(tcon);
 	cifs_put_smb_ses(ses);
 }
@@ -1843,6 +1919,8 @@ cifs_get_tcon(struct cifsSesInfo *ses, struct smb_vol *volume_info)
 	list_add(&tcon->tcon_list, &ses->tcon_list);
 	write_unlock(&cifs_tcp_ses_lock);
 
+	cifs_fscache_get_super_cookie(tcon);
+
 	return tcon;
 
 out_fail:
@@ -2397,6 +2475,8 @@ static void setup_cifs_sb(struct smb_vol *pvolume_info,
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
 	if (pvolume_info->dynperm)
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
+	if (pvolume_info->fsc)
+		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_FSCACHE;
 	if (pvolume_info->direct_io) {
 		cFYI(1, "mounting share using direct i/o");
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 391816b461c..a7de5e9fff1 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
+#include <linux/file.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -129,12 +130,6 @@ cifs_bp_rename_retry:
 	return full_path;
 }
 
-/*
- * When called with struct file pointer set to NULL, there is no way we could
- * update file->private_data, but getting it stuck on openFileList provides a
- * way to access it from cifs_fill_filedata and thereby set file->private_data
- * from cifs_open.
- */
 struct cifsFileInfo *
 cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 		  struct file *file, struct vfsmount *mnt, unsigned int oflags)
@@ -184,12 +179,13 @@ cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 	}
 	write_unlock(&GlobalSMBSeslock);
 
+	file->private_data = pCifsFile;
+
 	return pCifsFile;
 }
 
 int cifs_posix_open(char *full_path, struct inode **pinode,
-			struct vfsmount *mnt, struct super_block *sb,
-			int mode, int oflags,
+			struct super_block *sb, int mode, int oflags,
 			__u32 *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
@@ -258,19 +254,6 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	/*
-	 * cifs_fill_filedata() takes care of setting cifsFileInfo pointer to
-	 * file->private_data.
-	 */
-	if (mnt) {
-		struct cifsFileInfo *pfile_info;
-
-		pfile_info = cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt,
-					       oflags);
-		if (pfile_info == NULL)
-			rc = -ENOMEM;
-	}
-
 posix_open_ret:
 	kfree(presp_data);
 	return rc;
@@ -298,7 +281,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	int create_options = CREATE_NOT_DIR;
 	__u32 oplock = 0;
 	int oflags;
-	bool posix_create = false;
 	/*
 	 * BB below access is probably too much for mknod to request
 	 *    but we have to do query and setpathinfo so requesting
@@ -339,7 +321,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	    (CIFS_UNIX_POSIX_PATH_OPS_CAP &
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		rc = cifs_posix_open(full_path, &newinode,
-			nd ? nd->path.mnt : NULL,
 			inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
@@ -347,7 +328,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		   handled in posix open */
 
 		if (rc == 0) {
-			posix_create = true;
 			if (newinode == NULL) /* query inode info */
 				goto cifs_create_get_file_info;
 			else /* success, no need to query */
@@ -478,21 +458,28 @@ cifs_create_set_dentry:
 	else
 		cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
 
-	/* nfsd case - nfs srv does not set nd */
-	if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
-		/* mknod case - do not leave file open */
-		CIFSSMBClose(xid, tcon, fileHandle);
-	} else if (!(posix_create) && (newinode)) {
+	if (newinode && nd && (nd->flags & LOOKUP_OPEN)) {
 		struct cifsFileInfo *pfile_info;
-		/*
-		 * cifs_fill_filedata() takes care of setting cifsFileInfo
-		 * pointer to file->private_data.
-		 */
-		pfile_info = cifs_new_fileinfo(newinode, fileHandle, NULL,
+		struct file *filp;
+
+		filp = lookup_instantiate_filp(nd, direntry, generic_file_open);
+		if (IS_ERR(filp)) {
+			rc = PTR_ERR(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
+			goto cifs_create_out;
+		}
+
+		pfile_info = cifs_new_fileinfo(newinode, fileHandle, filp,
 					       nd->path.mnt, oflags);
-		if (pfile_info == NULL)
+		if (pfile_info == NULL) {
+			fput(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
 			rc = -ENOMEM;
+		}
+	} else {
+		CIFSSMBClose(xid, tcon, fileHandle);
 	}
+
 cifs_create_out:
 	kfree(buf);
 	kfree(full_path);
@@ -636,6 +623,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
+	struct cifsFileInfo *cfile;
 	struct inode *newInode = NULL;
 	char *full_path = NULL;
 	struct file *filp;
@@ -703,7 +691,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
-			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
+			rc = cifs_posix_open(full_path, &newInode,
 					parent_dir_inode->i_sb,
 					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
@@ -733,8 +721,25 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		else
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
-		if (posix_open)
-			filp = lookup_instantiate_filp(nd, direntry, NULL);
+		if (posix_open) {
+			filp = lookup_instantiate_filp(nd, direntry,
+						       generic_file_open);
+			if (IS_ERR(filp)) {
+				rc = PTR_ERR(filp);
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				goto lookup_out;
+			}
+
+			cfile = cifs_new_fileinfo(newInode, fileHandle, filp,
+						  nd->path.mnt,
+						  nd->intent.open.flags);
+			if (cfile == NULL) {
+				fput(filp);
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				rc = -ENOMEM;
+				goto lookup_out;
+			}
+		}
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
 		renew_parental_timestamps(direntry);
@@ -755,6 +760,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		is a common return code */
 	}
 
+lookup_out:
 	kfree(full_path);
 	FreeXid(xid);
 	return ERR_PTR(rc);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 4db2c5e7283..3ad7f4300c4 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -24,12 +24,16 @@
  */
 
 #include <linux/slab.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
 #include <keys/user-type.h>
 #include "dns_resolve.h"
 #include "cifsglob.h"
 #include "cifsproto.h"
 #include "cifs_debug.h"
 
+static const struct cred *dns_resolver_cache;
+
 /* Checks if supplied name is IP address
  * returns:
  * 		1 - name is IP
@@ -40,7 +44,7 @@ is_ip(char *name)
 {
 	struct sockaddr_storage ss;
 
-	return cifs_convert_address(name, &ss);
+	return cifs_convert_address((struct sockaddr *)&ss, name);
 }
 
 static int
@@ -94,6 +98,7 @@ struct key_type key_type_dns_resolver = {
 int
 dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
 {
+	const struct cred *saved_cred;
 	int rc = -EAGAIN;
 	struct key *rkey = ERR_PTR(-EAGAIN);
 	char *name;
@@ -133,8 +138,15 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
 		goto skip_upcall;
 	}
 
+	saved_cred = override_creds(dns_resolver_cache);
 	rkey = request_key(&key_type_dns_resolver, name, "");
+	revert_creds(saved_cred);
 	if (!IS_ERR(rkey)) {
+		if (!(rkey->perm & KEY_USR_VIEW)) {
+			down_read(&rkey->sem);
+			rkey->perm |= KEY_USR_VIEW;
+			up_read(&rkey->sem);
+		}
 		len = rkey->type_data.x[0];
 		data = rkey->payload.data;
 	} else {
@@ -165,4 +177,61 @@ out:
 	return rc;
 }
 
+int __init cifs_init_dns_resolver(void)
+{
+	struct cred *cred;
+	struct key *keyring;
+	int ret;
+
+	printk(KERN_NOTICE "Registering the %s key type\n",
+	       key_type_dns_resolver.name);
+
+	/* create an override credential set with a special thread keyring in
+	 * which DNS requests are cached
+	 *
+	 * this is used to prevent malicious redirections from being installed
+	 * with add_key().
+	 */
+	cred = prepare_kernel_cred(NULL);
+	if (!cred)
+		return -ENOMEM;
+
+	keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+			    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+			    KEY_USR_VIEW | KEY_USR_READ,
+			    KEY_ALLOC_NOT_IN_QUOTA);
+	if (IS_ERR(keyring)) {
+		ret = PTR_ERR(keyring);
+		goto failed_put_cred;
+	}
+
+	ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+	if (ret < 0)
+		goto failed_put_key;
+
+	ret = register_key_type(&key_type_dns_resolver);
+	if (ret < 0)
+		goto failed_put_key;
+
+	/* instruct request_key() to use this special keyring as a cache for
+	 * the results it looks up */
+	cred->thread_keyring = keyring;
+	cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+	dns_resolver_cache = cred;
+	return 0;
+
+failed_put_key:
+	key_put(keyring);
+failed_put_cred:
+	put_cred(cred);
+	return ret;
+}
 
+void cifs_exit_dns_resolver(void)
+{
+	key_revoke(dns_resolver_cache->thread_keyring);
+	unregister_key_type(&key_type_dns_resolver);
+	put_cred(dns_resolver_cache);
+	printk(KERN_NOTICE "Unregistered %s key type\n",
+	       key_type_dns_resolver.name);
+}
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 966e9288930..5d7f291df16 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,8 @@
 #define _DNS_RESOLVE_H
 
 #ifdef __KERNEL__
-#include <linux/key-type.h>
-extern struct key_type key_type_dns_resolver;
+extern int __init cifs_init_dns_resolver(void);
+extern void cifs_exit_dns_resolver(void);
 extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
 #endif /* KERNEL */
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index f1ff785b229..fa04a00d126 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -40,6 +40,7 @@
 #include "cifs_unicode.h"
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
+#include "fscache.h"
 
 static inline int cifs_convert_flags(unsigned int flags)
 {
@@ -162,44 +163,12 @@ psx_client_can_cache:
 	return 0;
 }
 
-static struct cifsFileInfo *
-cifs_fill_filedata(struct file *file)
-{
-	struct list_head *tmp;
-	struct cifsFileInfo *pCifsFile = NULL;
-	struct cifsInodeInfo *pCifsInode = NULL;
-
-	/* search inode for this file and fill in file->private_data */
-	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	read_lock(&GlobalSMBSeslock);
-	list_for_each(tmp, &pCifsInode->openFileList) {
-		pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
-		if ((pCifsFile->pfile == NULL) &&
-		    (pCifsFile->pid == current->tgid)) {
-			/* mode set in cifs_create */
-
-			/* needed for writepage */
-			pCifsFile->pfile = file;
-			file->private_data = pCifsFile;
-			break;
-		}
-	}
-	read_unlock(&GlobalSMBSeslock);
-
-	if (file->private_data != NULL) {
-		return pCifsFile;
-	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
-			cERROR(1, "could not find file instance for "
-				   "new file %p", file);
-	return NULL;
-}
-
 /* all arguments to this function must be checked for validity in caller */
-static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
-	struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
+static inline int cifs_open_inode_helper(struct inode *inode,
 	struct cifsTconInfo *pTcon, int *oplock, FILE_ALL_INFO *buf,
 	char *full_path, int xid)
 {
+	struct cifsInodeInfo *pCifsInode = CIFS_I(inode);
 	struct timespec temp;
 	int rc;
 
@@ -213,36 +182,35 @@ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 	/* if not oplocked, invalidate inode pages if mtime or file
 	   size changed */
 	temp = cifs_NTtimeToUnix(buf->LastWriteTime);
-	if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
-			   (file->f_path.dentry->d_inode->i_size ==
+	if (timespec_equal(&inode->i_mtime, &temp) &&
+			   (inode->i_size ==
 			    (loff_t)le64_to_cpu(buf->EndOfFile))) {
 		cFYI(1, "inode unchanged on server");
 	} else {
-		if (file->f_path.dentry->d_inode->i_mapping) {
+		if (inode->i_mapping) {
 			/* BB no need to lock inode until after invalidate
 			since namei code should already have it locked? */
-			rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+			rc = filemap_write_and_wait(inode->i_mapping);
 			if (rc != 0)
-				CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
+				pCifsInode->write_behind_rc = rc;
 		}
 		cFYI(1, "invalidating remote inode since open detected it "
 			 "changed");
-		invalidate_remote_inode(file->f_path.dentry->d_inode);
+		invalidate_remote_inode(inode);
 	}
 
 client_can_cache:
 	if (pTcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&file->f_path.dentry->d_inode,
-			full_path, inode->i_sb, xid);
+		rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
+					      xid);
 	else
-		rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
-			full_path, buf, inode->i_sb, xid, NULL);
+		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
+					 xid, NULL);
 
 	if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 		pCifsInode->clientCanCacheAll = true;
 		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p",
-			 file->f_path.dentry->d_inode);
+		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
 	} else if ((*oplock & 0xF) == OPLOCK_READ)
 		pCifsInode->clientCanCacheRead = true;
 
@@ -256,7 +224,7 @@ int cifs_open(struct inode *inode, struct file *file)
 	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *pCifsFile;
+	struct cifsFileInfo *pCifsFile = NULL;
 	struct cifsInodeInfo *pCifsInode;
 	char *full_path = NULL;
 	int desiredAccess;
@@ -270,12 +238,6 @@ int cifs_open(struct inode *inode, struct file *file)
 	tcon = cifs_sb->tcon;
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	pCifsFile = cifs_fill_filedata(file);
-	if (pCifsFile) {
-		rc = 0;
-		FreeXid(xid);
-		return rc;
-	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -299,8 +261,7 @@ int cifs_open(struct inode *inode, struct file *file)
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		oflags |= SMB_O_CREAT;
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, &inode, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -308,9 +269,23 @@ int cifs_open(struct inode *inode, struct file *file)
 			/* no need for special case handling of setting mode
 			   on read only files needed here */
 
-			pCifsFile = cifs_fill_filedata(file);
-			cifs_posix_open_inode_helper(inode, file, pCifsInode,
-						     oplock, netfid);
+			rc = cifs_posix_open_inode_helper(inode, file,
+					pCifsInode, oplock, netfid);
+			if (rc != 0) {
+				CIFSSMBClose(xid, tcon, netfid);
+				goto out;
+			}
+
+			pCifsFile = cifs_new_fileinfo(inode, netfid, file,
+							file->f_path.mnt,
+							oflags);
+			if (pCifsFile == NULL) {
+				CIFSSMBClose(xid, tcon, netfid);
+				rc = -ENOMEM;
+			}
+
+			cifs_fscache_set_inode_cookie(inode, file);
+
 			goto out;
 		} else if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
 			if (tcon->ses->serverNOS)
@@ -391,16 +366,18 @@ int cifs_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
+	rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
+	if (rc != 0)
+		goto out;
+
 	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
 					file->f_flags);
-	file->private_data = pCifsFile;
-	if (file->private_data == NULL) {
+	if (pCifsFile == NULL) {
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
-				    &oplock, buf, full_path, xid);
+	cifs_fscache_set_inode_cookie(inode, file);
 
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
@@ -456,7 +433,7 @@ static int cifs_reopen_file(struct file *file, bool can_flush)
 	__u16 netfid;
 
 	if (file->private_data)
-		pCifsFile = (struct cifsFileInfo *)file->private_data;
+		pCifsFile = file->private_data;
 	else
 		return -EBADF;
 
@@ -513,8 +490,7 @@ reopen_error_exit:
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, NULL, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -595,8 +571,7 @@ int cifs_close(struct inode *inode, struct file *file)
 	int xid, timeout;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
-	struct cifsFileInfo *pSMBFile =
-		(struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *pSMBFile = file->private_data;
 
 	xid = GetXid();
 
@@ -671,8 +646,7 @@ int cifs_closedir(struct inode *inode, struct file *file)
 {
 	int rc = 0;
 	int xid;
-	struct cifsFileInfo *pCFileStruct =
-	    (struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *pCFileStruct = file->private_data;
 	char *ptmp;
 
 	cFYI(1, "Closedir inode = 0x%p", inode);
@@ -893,8 +867,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 				      length, pfLock,
 				      posix_lock_type, wait_flag);
 	} else {
-		struct cifsFileInfo *fid =
-			(struct cifsFileInfo *)file->private_data;
+		struct cifsFileInfo *fid = file->private_data;
 
 		if (numLock) {
 			rc = CIFSSMBLock(xid, tcon, netfid, length,
@@ -995,7 +968,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 
 	if (file->private_data == NULL)
 		return -EBADF;
-	open_file = (struct cifsFileInfo *) file->private_data;
+	open_file = file->private_data;
 
 	rc = generic_write_checks(file, poffset, &write_size, 0);
 	if (rc)
@@ -1097,7 +1070,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 
 	if (file->private_data == NULL)
 		return -EBADF;
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	xid = GetXid();
 
@@ -1681,8 +1654,7 @@ int cifs_fsync(struct file *file, int datasync)
 	int xid;
 	int rc = 0;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *smbfile =
-		(struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *smbfile = file->private_data;
 	struct inode *inode = file->f_path.dentry->d_inode;
 
 	xid = GetXid();
@@ -1786,7 +1758,7 @@ ssize_t cifs_user_read(struct file *file, char __user *read_data,
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	if ((file->f_flags & O_ACCMODE) == O_WRONLY)
 		cFYI(1, "attempting read on write only file instance");
@@ -1867,7 +1839,7 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size,
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	if ((file->f_flags & O_ACCMODE) == O_WRONLY)
 		cFYI(1, "attempting read on write only file instance");
@@ -1952,6 +1924,7 @@ static void cifs_copy_cache_pages(struct address_space *mapping,
 			bytes_read -= PAGE_CACHE_SIZE;
 			continue;
 		}
+		page_cache_release(page);
 
 		target = kmap_atomic(page, KM_USER0);
 
@@ -1971,6 +1944,9 @@ static void cifs_copy_cache_pages(struct address_space *mapping,
 		SetPageUptodate(page);
 		unlock_page(page);
 		data += PAGE_CACHE_SIZE;
+
+		/* add page to FS-Cache */
+		cifs_readpage_to_fscache(mapping->host, page);
 	}
 	return;
 }
@@ -1997,10 +1973,19 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 	pTcon = cifs_sb->tcon;
 
+	/*
+	 * Reads as many pages as possible from fscache. Returns -ENOBUFS
+	 * immediately if the cookie is negative
+	 */
+	rc = cifs_readpages_from_fscache(mapping->host, mapping, page_list,
+					 &num_pages);
+	if (rc == 0)
+		goto read_complete;
+
 	cFYI(DBG2, "rpages: num pages %d", num_pages);
 	for (i = 0; i < num_pages; ) {
 		unsigned contig_pages;
@@ -2111,6 +2096,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 		smb_read_data = NULL;
 	}
 
+read_complete:
 	FreeXid(xid);
 	return rc;
 }
@@ -2121,6 +2107,11 @@ static int cifs_readpage_worker(struct file *file, struct page *page,
 	char *read_data;
 	int rc;
 
+	/* Is the page cached? */
+	rc = cifs_readpage_from_fscache(file->f_path.dentry->d_inode, page);
+	if (rc == 0)
+		goto read_complete;
+
 	page_cache_get(page);
 	read_data = kmap(page);
 	/* for reads over a certain size could initiate async read ahead */
@@ -2140,11 +2131,17 @@ static int cifs_readpage_worker(struct file *file, struct page *page,
 
 	flush_dcache_page(page);
 	SetPageUptodate(page);
+
+	/* send this page to the cache */
+	cifs_readpage_to_fscache(file->f_path.dentry->d_inode, page);
+
 	rc = 0;
 
 io_error:
 	kunmap(page);
 	page_cache_release(page);
+
+read_complete:
 	return rc;
 }
 
@@ -2294,6 +2291,22 @@ out:
 	return rc;
 }
 
+static int cifs_release_page(struct page *page, gfp_t gfp)
+{
+	if (PagePrivate(page))
+		return 0;
+
+	return cifs_fscache_release_page(page, gfp);
+}
+
+static void cifs_invalidate_page(struct page *page, unsigned long offset)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(page->mapping->host);
+
+	if (offset == 0)
+		cifs_fscache_invalidate_page(page, &cifsi->vfs_inode);
+}
+
 static void
 cifs_oplock_break(struct slow_work *work)
 {
@@ -2367,6 +2380,8 @@ const struct address_space_operations cifs_addr_ops = {
 	.write_begin = cifs_write_begin,
 	.write_end = cifs_write_end,
 	.set_page_dirty = __set_page_dirty_nobuffers,
+	.releasepage = cifs_release_page,
+	.invalidatepage = cifs_invalidate_page,
 	/* .sync_page = cifs_sync_page, */
 	/* .direct_IO = */
 };
@@ -2383,6 +2398,8 @@ const struct address_space_operations cifs_addr_ops_smallbuf = {
 	.write_begin = cifs_write_begin,
 	.write_end = cifs_write_end,
 	.set_page_dirty = __set_page_dirty_nobuffers,
+	.releasepage = cifs_release_page,
+	.invalidatepage = cifs_invalidate_page,
 	/* .sync_page = cifs_sync_page, */
 	/* .direct_IO = */
 };
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
new file mode 100644
index 00000000000..9f3f5c4be16
--- /dev/null
+++ b/fs/cifs/fscache.c
@@ -0,0 +1,236 @@
+/*
+ *   fs/cifs/fscache.c - CIFS filesystem cache interface
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include "fscache.h"
+#include "cifsglob.h"
+#include "cifs_debug.h"
+#include "cifs_fs_sb.h"
+
+void cifs_fscache_get_client_cookie(struct TCP_Server_Info *server)
+{
+	server->fscache =
+		fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
+				&cifs_fscache_server_index_def, server);
+	cFYI(1, "CIFS: get client cookie (0x%p/0x%p)", server,
+				server->fscache);
+}
+
+void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server)
+{
+	cFYI(1, "CIFS: release client cookie (0x%p/0x%p)", server,
+				server->fscache);
+	fscache_relinquish_cookie(server->fscache, 0);
+	server->fscache = NULL;
+}
+
+void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon)
+{
+	struct TCP_Server_Info *server = tcon->ses->server;
+
+	tcon->fscache =
+		fscache_acquire_cookie(server->fscache,
+				&cifs_fscache_super_index_def, tcon);
+	cFYI(1, "CIFS: get superblock cookie (0x%p/0x%p)",
+				server->fscache, tcon->fscache);
+}
+
+void cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon)
+{
+	cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache);
+	fscache_relinquish_cookie(tcon->fscache, 0);
+	tcon->fscache = NULL;
+}
+
+static void cifs_fscache_enable_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+	if (cifsi->fscache)
+		return;
+
+	cifsi->fscache = fscache_acquire_cookie(cifs_sb->tcon->fscache,
+				&cifs_fscache_inode_object_def,
+				cifsi);
+	cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)",
+			cifs_sb->tcon->fscache, cifsi->fscache);
+}
+
+void cifs_fscache_release_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+	if (cifsi->fscache) {
+		cFYI(1, "CIFS releasing inode cookie (0x%p)",
+				cifsi->fscache);
+		fscache_relinquish_cookie(cifsi->fscache, 0);
+		cifsi->fscache = NULL;
+	}
+}
+
+static void cifs_fscache_disable_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+	if (cifsi->fscache) {
+		cFYI(1, "CIFS disabling inode cookie (0x%p)",
+				cifsi->fscache);
+		fscache_relinquish_cookie(cifsi->fscache, 1);
+		cifsi->fscache = NULL;
+	}
+}
+
+void cifs_fscache_set_inode_cookie(struct inode *inode, struct file *filp)
+{
+	if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+		cifs_fscache_disable_inode_cookie(inode);
+	else {
+		cifs_fscache_enable_inode_cookie(inode);
+		cFYI(1, "CIFS: fscache inode cookie set");
+	}
+}
+
+void cifs_fscache_reset_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct fscache_cookie *old = cifsi->fscache;
+
+	if (cifsi->fscache) {
+		/* retire the current fscache cache and get a new one */
+		fscache_relinquish_cookie(cifsi->fscache, 1);
+
+		cifsi->fscache = fscache_acquire_cookie(cifs_sb->tcon->fscache,
+					&cifs_fscache_inode_object_def,
+					cifsi);
+		cFYI(1, "CIFS: new cookie 0x%p oldcookie 0x%p",
+				cifsi->fscache, old);
+	}
+}
+
+int cifs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+	if (PageFsCache(page)) {
+		struct inode *inode = page->mapping->host;
+		struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+		cFYI(1, "CIFS: fscache release page (0x%p/0x%p)",
+				page, cifsi->fscache);
+		if (!fscache_maybe_release_page(cifsi->fscache, page, gfp))
+			return 0;
+	}
+
+	return 1;
+}
+
+static void cifs_readpage_from_fscache_complete(struct page *page, void *ctx,
+						int error)
+{
+	cFYI(1, "CFS: readpage_from_fscache_complete (0x%p/%d)",
+			page, error);
+	if (!error)
+		SetPageUptodate(page);
+	unlock_page(page);
+}
+
+/*
+ * Retrieve a page from FS-Cache
+ */
+int __cifs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+	int ret;
+
+	cFYI(1, "CIFS: readpage_from_fscache(fsc:%p, p:%p, i:0x%p",
+			CIFS_I(inode)->fscache, page, inode);
+	ret = fscache_read_or_alloc_page(CIFS_I(inode)->fscache, page,
+					 cifs_readpage_from_fscache_complete,
+					 NULL,
+					 GFP_KERNEL);
+	switch (ret) {
+
+	case 0: /* page found in fscache, read submitted */
+		cFYI(1, "CIFS: readpage_from_fscache: submitted");
+		return ret;
+	case -ENOBUFS:	/* page won't be cached */
+	case -ENODATA:	/* page not in cache */
+		cFYI(1, "CIFS: readpage_from_fscache %d", ret);
+		return 1;
+
+	default:
+		cERROR(1, "unknown error ret = %d", ret);
+	}
+	return ret;
+}
+
+/*
+ * Retrieve a set of pages from FS-Cache
+ */
+int __cifs_readpages_from_fscache(struct inode *inode,
+				struct address_space *mapping,
+				struct list_head *pages,
+				unsigned *nr_pages)
+{
+	int ret;
+
+	cFYI(1, "CIFS: __cifs_readpages_from_fscache (0x%p/%u/0x%p)",
+			CIFS_I(inode)->fscache, *nr_pages, inode);
+	ret = fscache_read_or_alloc_pages(CIFS_I(inode)->fscache, mapping,
+					  pages, nr_pages,
+					  cifs_readpage_from_fscache_complete,
+					  NULL,
+					  mapping_gfp_mask(mapping));
+	switch (ret) {
+	case 0:	/* read submitted to the cache for all pages */
+		cFYI(1, "CIFS: readpages_from_fscache: submitted");
+		return ret;
+
+	case -ENOBUFS:	/* some pages are not cached and can't be */
+	case -ENODATA:	/* some pages are not cached */
+		cFYI(1, "CIFS: readpages_from_fscache: no page");
+		return 1;
+
+	default:
+		cFYI(1, "unknown error ret = %d", ret);
+	}
+
+	return ret;
+}
+
+void __cifs_readpage_to_fscache(struct inode *inode, struct page *page)
+{
+	int ret;
+
+	cFYI(1, "CIFS: readpage_to_fscache(fsc: %p, p: %p, i: %p",
+			CIFS_I(inode)->fscache, page, inode);
+	ret = fscache_write_page(CIFS_I(inode)->fscache, page, GFP_KERNEL);
+	if (ret != 0)
+		fscache_uncache_page(CIFS_I(inode)->fscache, page);
+}
+
+void __cifs_fscache_invalidate_page(struct page *page, struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct fscache_cookie *cookie = cifsi->fscache;
+
+	cFYI(1, "CIFS: fscache invalidatepage (0x%p/0x%p)", page, cookie);
+	fscache_wait_on_page_write(cookie, page);
+	fscache_uncache_page(cookie, page);
+}
+
diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h
new file mode 100644
index 00000000000..31b88ec2341
--- /dev/null
+++ b/fs/cifs/fscache.h
@@ -0,0 +1,136 @@
+/*
+ *   fs/cifs/fscache.h - CIFS filesystem cache interface definitions
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Authors(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _CIFS_FSCACHE_H
+#define _CIFS_FSCACHE_H
+
+#include <linux/fscache.h>
+
+#include "cifsglob.h"
+
+#ifdef CONFIG_CIFS_FSCACHE
+
+extern struct fscache_netfs cifs_fscache_netfs;
+extern const struct fscache_cookie_def cifs_fscache_server_index_def;
+extern const struct fscache_cookie_def cifs_fscache_super_index_def;
+extern const struct fscache_cookie_def cifs_fscache_inode_object_def;
+
+extern int cifs_fscache_register(void);
+extern void cifs_fscache_unregister(void);
+
+/*
+ * fscache.c
+ */
+extern void cifs_fscache_get_client_cookie(struct TCP_Server_Info *);
+extern void cifs_fscache_release_client_cookie(struct TCP_Server_Info *);
+extern void cifs_fscache_get_super_cookie(struct cifsTconInfo *);
+extern void cifs_fscache_release_super_cookie(struct cifsTconInfo *);
+
+extern void cifs_fscache_release_inode_cookie(struct inode *);
+extern void cifs_fscache_set_inode_cookie(struct inode *, struct file *);
+extern void cifs_fscache_reset_inode_cookie(struct inode *);
+
+extern void __cifs_fscache_invalidate_page(struct page *, struct inode *);
+extern int cifs_fscache_release_page(struct page *page, gfp_t gfp);
+extern int __cifs_readpage_from_fscache(struct inode *, struct page *);
+extern int __cifs_readpages_from_fscache(struct inode *,
+					 struct address_space *,
+					 struct list_head *,
+					 unsigned *);
+
+extern void __cifs_readpage_to_fscache(struct inode *, struct page *);
+
+static inline void cifs_fscache_invalidate_page(struct page *page,
+					       struct inode *inode)
+{
+	if (PageFsCache(page))
+		__cifs_fscache_invalidate_page(page, inode);
+}
+
+static inline int cifs_readpage_from_fscache(struct inode *inode,
+					     struct page *page)
+{
+	if (CIFS_I(inode)->fscache)
+		return __cifs_readpage_from_fscache(inode, page);
+
+	return -ENOBUFS;
+}
+
+static inline int cifs_readpages_from_fscache(struct inode *inode,
+					      struct address_space *mapping,
+					      struct list_head *pages,
+					      unsigned *nr_pages)
+{
+	if (CIFS_I(inode)->fscache)
+		return __cifs_readpages_from_fscache(inode, mapping, pages,
+						     nr_pages);
+	return -ENOBUFS;
+}
+
+static inline void cifs_readpage_to_fscache(struct inode *inode,
+					    struct page *page)
+{
+	if (PageFsCache(page))
+		__cifs_readpage_to_fscache(inode, page);
+}
+
+#else /* CONFIG_CIFS_FSCACHE */
+static inline int cifs_fscache_register(void) { return 0; }
+static inline void cifs_fscache_unregister(void) {}
+
+static inline void
+cifs_fscache_get_client_cookie(struct TCP_Server_Info *server) {}
+static inline void
+cifs_fscache_release_client_cookie(struct TCP_Server_Info *server) {}
+static inline void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon) {}
+static inline void
+cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon) {}
+
+static inline void cifs_fscache_release_inode_cookie(struct inode *inode) {}
+static inline void cifs_fscache_set_inode_cookie(struct inode *inode,
+						 struct file *filp) {}
+static inline void cifs_fscache_reset_inode_cookie(struct inode *inode) {}
+static inline int cifs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+	return 1; /* May release page */
+}
+
+static inline void cifs_fscache_invalidate_page(struct page *page,
+			struct inode *inode) {}
+static inline int
+cifs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+	return -ENOBUFS;
+}
+
+static inline int cifs_readpages_from_fscache(struct inode *inode,
+					      struct address_space *mapping,
+					      struct list_head *pages,
+					      unsigned *nr_pages)
+{
+	return -ENOBUFS;
+}
+
+static inline void cifs_readpage_to_fscache(struct inode *inode,
+			struct page *page) {}
+
+#endif /* CONFIG_CIFS_FSCACHE */
+
+#endif /* _CIFS_FSCACHE_H */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 62b324f26a5..a15b3a9bbff 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -29,6 +29,7 @@
 #include "cifsproto.h"
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
+#include "fscache.h"
 
 
 static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral)
@@ -288,7 +289,7 @@ int cifs_get_file_info_unix(struct file *filp)
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
-	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+	struct cifsFileInfo *cfile = filp->private_data;
 
 	xid = GetXid();
 	rc = CIFSSMBUnixQFileInfo(xid, tcon, cfile->netfid, &find_data);
@@ -515,7 +516,7 @@ int cifs_get_file_info(struct file *filp)
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
-	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+	struct cifsFileInfo *cfile = filp->private_data;
 
 	xid = GetXid();
 	rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data);
@@ -723,9 +724,14 @@ cifs_find_inode(struct inode *inode, void *opaque)
 {
 	struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
 
+	/* don't match inode with different uniqueid */
 	if (CIFS_I(inode)->uniqueid != fattr->cf_uniqueid)
 		return 0;
 
+	/* don't match inode of different type */
+	if ((inode->i_mode & S_IFMT) != (fattr->cf_mode & S_IFMT))
+		return 0;
+
 	/*
 	 * uh oh -- it's a directory. We can't use it since hardlinked dirs are
 	 * verboten. Disable serverino and return it as if it were found, the
@@ -776,6 +782,10 @@ retry_iget5_locked:
 			inode->i_flags |= S_NOATIME | S_NOCMTIME;
 		if (inode->i_state & I_NEW) {
 			inode->i_ino = hash;
+#ifdef CONFIG_CIFS_FSCACHE
+			/* initialize per-inode cache cookie pointer */
+			CIFS_I(inode)->fscache = NULL;
+#endif
 			unlock_new_inode(inode);
 		}
 	}
@@ -807,6 +817,11 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
+#ifdef CONFIG_CIFS_FSCACHE
+	/* populate tcon->resource_id */
+	cifs_sb->tcon->resource_id = CIFS_I(inode)->uniqueid;
+#endif
+
 	if (rc && cifs_sb->tcon->ipc) {
 		cFYI(1, "ipc connection - fake read inode");
 		inode->i_mode |= S_IFDIR;
@@ -1401,6 +1416,10 @@ cifs_do_rename(int xid, struct dentry *from_dentry, const char *fromPath,
 	if (rc == 0 || rc != -ETXTBSY)
 		return rc;
 
+	/* open-file renames don't work across directories */
+	if (to_dentry->d_parent != from_dentry->d_parent)
+		return rc;
+
 	/* open the file to be renamed -- we need DELETE perms */
 	rc = CIFSSMBOpen(xid, pTcon, fromPath, FILE_OPEN, DELETE,
 			 CREATE_NOT_DIR, &srcfid, &oplock, NULL,
@@ -1564,6 +1583,7 @@ cifs_invalidate_mapping(struct inode *inode)
 			cifs_i->write_behind_rc = rc;
 	}
 	invalidate_remote_inode(inode);
+	cifs_fscache_reset_inode_cookie(inode);
 }
 
 int cifs_revalidate_file(struct file *filp)
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 505926f1ee6..9d38a71c8e1 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -41,8 +41,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 	__u64	ExtAttrMask = 0;
 	__u64   caps;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *pSMBFile =
-		(struct cifsFileInfo *)filep->private_data;
+	struct cifsFileInfo *pSMBFile = filep->private_data;
 #endif /* CONFIG_CIFS_POSIX */
 
 	xid = GetXid();
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index d35d52889cb..c6721ee26db 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -61,6 +61,7 @@ static const struct smb_to_posix_error mapping_table_ERRDOS[] = {
 	{ERRremcd, -EACCES},
 	{ERRdiffdevice, -EXDEV},
 	{ERRnofiles, -ENOENT},
+	{ERRwriteprot, -EROFS},
 	{ERRbadshare, -ETXTBSY},
 	{ERRlock, -EACCES},
 	{ERRunsup, -EINVAL},
@@ -164,7 +165,7 @@ cifs_inet_pton(const int address_family, const char *cp, void *dst)
  * Returns 0 on failure.
  */
 int
-cifs_convert_address(char *src, void *dst)
+cifs_convert_address(struct sockaddr *dst, char *src)
 {
 	int rc;
 	char *pct, *endp;
@@ -201,6 +202,27 @@ cifs_convert_address(char *src, void *dst)
 	return rc;
 }
 
+int
+cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+		   const unsigned short int port)
+{
+	if (!cifs_convert_address(dst, src))
+		return 0;
+
+	switch (dst->sa_family) {
+	case AF_INET:
+		((struct sockaddr_in *)dst)->sin_port = htons(port);
+		break;
+	case AF_INET6:
+		((struct sockaddr_in6 *)dst)->sin6_port = htons(port);
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
 /*****************************************************************************
 convert a NT status code to a dos class/code
  *****************************************************************************/
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index daf1753af67..d5e591fab47 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -847,6 +847,11 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 		end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
 
 		tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
+		if (tmp_buf == NULL) {
+			rc = -ENOMEM;
+			break;
+		}
+
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7707389bdf2..0a57cb7db5d 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -730,15 +730,7 @@ ssetup_ntlmssp_authenticate:
 
 		/* calculate session key */
 		setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
-		if (first_time) /* should this be moved into common code
-				   with similar ntlmv2 path? */
-		/*   cifs_calculate_ntlmv2_mac_key(ses->server->mac_signing_key,
-				response BB FIXME, v2_sess_key); */
-
-		/* copy session key */
-
-	/*	memcpy(bcc_ptr, (char *)ntlm_session_key,LM2_SESS_KEY_SIZE);
-		bcc_ptr += LM2_SESS_KEY_SIZE; */
+		/* FIXME: calculate MAC key */
 		memcpy(bcc_ptr, (char *)v2_sess_key,
 		       sizeof(struct ntlmv2_resp));
 		bcc_ptr += sizeof(struct ntlmv2_resp);
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index c5084d27db7..7f16cb825fe 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -76,6 +76,7 @@
 #define ERRnofiles		18	/* A File Search command can find no
 					   more files matching the specified
 					   criteria. */
+#define ERRwriteprot		19	/* media is write protected */
 #define ERRgeneral		31
 #define ERRbadshare		32	/* The sharing mode specified for an
 					   Open conflicts with existing FIDs on
diff --git a/fs/compat.c b/fs/compat.c
index f0b391c5055..6490d2134ff 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -626,7 +626,7 @@ ssize_t compat_rw_copy_check_uvector(int type,
 		tot_len += len;
 		if (tot_len < tmp) /* maths overflow on the compat_ssize_t */
 			goto out;
-		if (!access_ok(vrfy_dir(type), buf, len)) {
+		if (!access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
 			ret = -EFAULT;
 			goto out;
 		}
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 41645142b88..cf78d44a8d6 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -72,10 +72,6 @@ int configfs_setattr(struct dentry * dentry, struct iattr * iattr)
 	if (!sd)
 		return -EINVAL;
 
-	error = simple_setattr(dentry, iattr);
-	if (error)
-		return error;
-
 	sd_iattr = sd->s_iattr;
 	if (!sd_iattr) {
 		/* setting attributes for the first time, allocate now */
@@ -89,9 +85,12 @@ int configfs_setattr(struct dentry * dentry, struct iattr * iattr)
 		sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
 		sd->s_iattr = sd_iattr;
 	}
-
 	/* attributes were changed atleast once in past */
 
+	error = simple_setattr(dentry, iattr);
+	if (error)
+		return error;
+
 	if (ia_valid & ATTR_UID)
 		sd_iattr->ia_uid = iattr->ia_uid;
 	if (ia_valid & ATTR_GID)
diff --git a/fs/dcache.c b/fs/dcache.c
index d96047b4a63..86d4db15473 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -590,6 +590,8 @@ static void prune_dcache(int count)
 			up_read(&sb->s_umount);
 		}
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		count -= pruned;
 		__put_super(sb);
 		/* more work left to do? */
@@ -894,7 +896,7 @@ EXPORT_SYMBOL(shrink_dcache_parent);
  *
  * In this case we return -1 to tell the caller that we baled.
  */
-static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		if (!(gfp_mask & __GFP_FS))
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 7600aacf531..a10cb91cade 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -218,7 +218,7 @@ static struct page *dio_get_page(struct dio *dio)
  * filesystems can use it to hold additional state between get_block calls and
  * dio_complete.
  */
-static int dio_complete(struct dio *dio, loff_t offset, int ret)
+static int dio_complete(struct dio *dio, loff_t offset, int ret, bool is_async)
 {
 	ssize_t transferred = 0;
 
@@ -239,14 +239,6 @@ static int dio_complete(struct dio *dio, loff_t offset, int ret)
 			transferred = dio->i_size - offset;
 	}
 
-	if (dio->end_io && dio->result)
-		dio->end_io(dio->iocb, offset, transferred,
-			    dio->map_bh.b_private);
-
-	if (dio->flags & DIO_LOCKING)
-		/* lockdep: non-owner release */
-		up_read_non_owner(&dio->inode->i_alloc_sem);
-
 	if (ret == 0)
 		ret = dio->page_errors;
 	if (ret == 0)
@@ -254,6 +246,17 @@ static int dio_complete(struct dio *dio, loff_t offset, int ret)
 	if (ret == 0)
 		ret = transferred;
 
+	if (dio->end_io && dio->result) {
+		dio->end_io(dio->iocb, offset, transferred,
+			    dio->map_bh.b_private, ret, is_async);
+	} else if (is_async) {
+		aio_complete(dio->iocb, ret, 0);
+	}
+
+	if (dio->flags & DIO_LOCKING)
+		/* lockdep: non-owner release */
+		up_read_non_owner(&dio->inode->i_alloc_sem);
+
 	return ret;
 }
 
@@ -277,8 +280,7 @@ static void dio_bio_end_aio(struct bio *bio, int error)
 	spin_unlock_irqrestore(&dio->bio_lock, flags);
 
 	if (remaining == 0) {
-		int ret = dio_complete(dio, dio->iocb->ki_pos, 0);
-		aio_complete(dio->iocb, ret, 0);
+		dio_complete(dio, dio->iocb->ki_pos, 0, true);
 		kfree(dio);
 	}
 }
@@ -1126,7 +1128,7 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
 	spin_unlock_irqrestore(&dio->bio_lock, flags);
 
 	if (ret2 == 0) {
-		ret = dio_complete(dio, offset, ret);
+		ret = dio_complete(dio, offset, ret, false);
 		kfree(dio);
 	} else
 		BUG_ON(ret != -EIOCBQUEUED);
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 2d8dbce9d48..46c4dd8dfcc 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -31,9 +31,9 @@ static struct mutex ecryptfs_msg_ctx_lists_mux;
 
 static struct hlist_head *ecryptfs_daemon_hash;
 struct mutex ecryptfs_daemon_hash_mux;
-static int ecryptfs_hash_buckets;
+static int ecryptfs_hash_bits;
 #define ecryptfs_uid_hash(uid) \
-        hash_long((unsigned long)uid, ecryptfs_hash_buckets)
+        hash_long((unsigned long)uid, ecryptfs_hash_bits)
 
 static u32 ecryptfs_msg_counter;
 static struct ecryptfs_msg_ctx *ecryptfs_msg_ctx_arr;
@@ -486,18 +486,19 @@ int ecryptfs_init_messaging(void)
 	}
 	mutex_init(&ecryptfs_daemon_hash_mux);
 	mutex_lock(&ecryptfs_daemon_hash_mux);
-	ecryptfs_hash_buckets = 1;
-	while (ecryptfs_number_of_users >> ecryptfs_hash_buckets)
-		ecryptfs_hash_buckets++;
+	ecryptfs_hash_bits = 1;
+	while (ecryptfs_number_of_users >> ecryptfs_hash_bits)
+		ecryptfs_hash_bits++;
 	ecryptfs_daemon_hash = kmalloc((sizeof(struct hlist_head)
-					* ecryptfs_hash_buckets), GFP_KERNEL);
+					* (1 << ecryptfs_hash_bits)),
+				       GFP_KERNEL);
 	if (!ecryptfs_daemon_hash) {
 		rc = -ENOMEM;
 		printk(KERN_ERR "%s: Failed to allocate memory\n", __func__);
 		mutex_unlock(&ecryptfs_daemon_hash_mux);
 		goto out;
 	}
-	for (i = 0; i < ecryptfs_hash_buckets; i++)
+	for (i = 0; i < (1 << ecryptfs_hash_bits); i++)
 		INIT_HLIST_HEAD(&ecryptfs_daemon_hash[i]);
 	mutex_unlock(&ecryptfs_daemon_hash_mux);
 	ecryptfs_msg_ctx_arr = kmalloc((sizeof(struct ecryptfs_msg_ctx)
@@ -554,7 +555,7 @@ void ecryptfs_release_messaging(void)
 		int i;
 
 		mutex_lock(&ecryptfs_daemon_hash_mux);
-		for (i = 0; i < ecryptfs_hash_buckets; i++) {
+		for (i = 0; i < (1 << ecryptfs_hash_bits); i++) {
 			int rc;
 
 			hlist_for_each_entry(daemon, elem,
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index ca7e2a0ed98..2bcc0431bad 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -200,6 +200,7 @@ ext2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					mark_inode_dirty(inode);
 					if (error == 0)
 						acl = NULL;
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 19214435b75..3675088cb88 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1552,7 +1552,7 @@ int ext2_setattr(struct dentry *dentry, struct iattr *iattr)
 		if (error)
 			return error;
 	}
-	if (iattr->ia_valid & ATTR_SIZE) {
+	if (iattr->ia_valid & ATTR_SIZE && iattr->ia_size != inode->i_size) {
 		error = ext2_setsize(inode, iattr->ia_size);
 		if (error)
 			return error;
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 01552abbca3..8a11fe21218 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -205,6 +205,7 @@ ext3_set_acl(handle_t *handle, struct inode *inode, int type,
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					ext3_mark_inode_dirty(handle, inode);
 					if (error == 0)
 						acl = NULL;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 19df61c321f..0afc8c1d8cf 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3775,7 +3775,8 @@ static ext4_io_end_t *ext4_init_io_end (struct inode *inode, gfp_t flags)
 }
 
 static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
-			    ssize_t size, void *private)
+			    ssize_t size, void *private, int ret,
+			    bool is_async)
 {
         ext4_io_end_t *io_end = iocb->private;
 	struct workqueue_struct *wq;
@@ -3784,7 +3785,7 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
 
 	/* if not async direct IO or dio with 0 bytes write, just return */
 	if (!io_end || !size)
-		return;
+		goto out;
 
 	ext_debug("ext4_end_io_dio(): io_end 0x%p"
 		  "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
@@ -3795,7 +3796,7 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
 	if (io_end->flag != EXT4_IO_UNWRITTEN){
 		ext4_free_io_end(io_end);
 		iocb->private = NULL;
-		return;
+		goto out;
 	}
 
 	io_end->offset = offset;
@@ -3812,6 +3813,9 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
 	list_add_tail(&io_end->list, &ei->i_completed_io_list);
 	spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
 	iocb->private = NULL;
+out:
+	if (is_async)
+		aio_complete(iocb, ret, 0);
 }
 
 static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate)
@@ -4942,20 +4946,26 @@ void ext4_set_inode_flags(struct inode *inode)
 /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */
 void ext4_get_inode_flags(struct ext4_inode_info *ei)
 {
-	unsigned int flags = ei->vfs_inode.i_flags;
-
-	ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
-			EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL);
-	if (flags & S_SYNC)
-		ei->i_flags |= EXT4_SYNC_FL;
-	if (flags & S_APPEND)
-		ei->i_flags |= EXT4_APPEND_FL;
-	if (flags & S_IMMUTABLE)
-		ei->i_flags |= EXT4_IMMUTABLE_FL;
-	if (flags & S_NOATIME)
-		ei->i_flags |= EXT4_NOATIME_FL;
-	if (flags & S_DIRSYNC)
-		ei->i_flags |= EXT4_DIRSYNC_FL;
+	unsigned int vfs_fl;
+	unsigned long old_fl, new_fl;
+
+	do {
+		vfs_fl = ei->vfs_inode.i_flags;
+		old_fl = ei->i_flags;
+		new_fl = old_fl & ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
+				EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|
+				EXT4_DIRSYNC_FL);
+		if (vfs_fl & S_SYNC)
+			new_fl |= EXT4_SYNC_FL;
+		if (vfs_fl & S_APPEND)
+			new_fl |= EXT4_APPEND_FL;
+		if (vfs_fl & S_IMMUTABLE)
+			new_fl |= EXT4_IMMUTABLE_FL;
+		if (vfs_fl & S_NOATIME)
+			new_fl |= EXT4_NOATIME_FL;
+		if (vfs_fl & S_DIRSYNC)
+			new_fl |= EXT4_DIRSYNC_FL;
+	} while (cmpxchg(&ei->i_flags, old_fl, new_fl) != old_fl);
 }
 
 static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
@@ -5191,7 +5201,7 @@ static int ext4_inode_blocks_set(handle_t *handle,
 		 */
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
 		raw_inode->i_blocks_high = 0;
-		ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+		ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 		return 0;
 	}
 	if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE))
@@ -5204,9 +5214,9 @@ static int ext4_inode_blocks_set(handle_t *handle,
 		 */
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
 		raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32);
-		ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+		ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 	} else {
-		ei->i_flags |= EXT4_HUGE_FILE_FL;
+		ext4_set_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 		/* i_block is stored in file system block size */
 		i_blocks = i_blocks >> (inode->i_blkbits - 9);
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 3a6c92ac131..52abfa12762 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -960,6 +960,9 @@ mext_check_arguments(struct inode *orig_inode,
 		return -EINVAL;
 	}
 
+	if (IS_IMMUTABLE(donor_inode) || IS_APPEND(donor_inode))
+		return -EPERM;
+
 	/* Ext4 move extent does not support swapfile */
 	if (IS_SWAPFILE(orig_inode) || IS_SWAPFILE(donor_inode)) {
 		ext4_debug("ext4 move extent: The argument files should "
diff --git a/fs/fcntl.c b/fs/fcntl.c
index f74d270ba15..9d175d623aa 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -274,7 +274,7 @@ static int f_setown_ex(struct file *filp, unsigned long arg)
 
 	ret = copy_from_user(&owner, owner_p, sizeof(owner));
 	if (ret)
-		return ret;
+		return -EFAULT;
 
 	switch (owner.type) {
 	case F_OWNER_TID:
@@ -332,8 +332,11 @@ static int f_getown_ex(struct file *filp, unsigned long arg)
 	}
 	read_unlock(&filp->f_owner.lock);
 
-	if (!ret)
+	if (!ret) {
 		ret = copy_to_user(owner_p, &owner, sizeof(owner));
+		if (ret)
+			ret = -EFAULT;
+	}
 	return ret;
 }
 
@@ -730,12 +733,14 @@ static void kill_fasync_rcu(struct fasync_struct *fa, int sig, int band)
 {
 	while (fa) {
 		struct fown_struct *fown;
+		unsigned long flags;
+
 		if (fa->magic != FASYNC_MAGIC) {
 			printk(KERN_ERR "kill_fasync: bad magic number in "
 			       "fasync_struct!\n");
 			return;
 		}
-		spin_lock(&fa->fa_lock);
+		spin_lock_irqsave(&fa->fa_lock, flags);
 		if (fa->fa_file) {
 			fown = &fa->fa_file->f_owner;
 			/* Don't send SIGURG to processes which have not set a
@@ -744,7 +749,7 @@ static void kill_fasync_rcu(struct fasync_struct *fa, int sig, int band)
 			if (!(sig == SIGURG && fown->signum == 0))
 				send_sigio(fown, fa->fa_fd, band);
 		}
-		spin_unlock(&fa->fa_lock);
+		spin_unlock_irqrestore(&fa->fa_lock, flags);
 		fa = rcu_dereference(fa->fa_next);
 	}
 }
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index ea8592b9069..d5be1693ac9 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -38,52 +38,18 @@ int nr_pdflush_threads;
 /*
  * Passed into wb_writeback(), essentially a subset of writeback_control
  */
-struct wb_writeback_args {
+struct wb_writeback_work {
 	long nr_pages;
 	struct super_block *sb;
 	enum writeback_sync_modes sync_mode;
 	unsigned int for_kupdate:1;
 	unsigned int range_cyclic:1;
 	unsigned int for_background:1;
-	unsigned int sb_pinned:1;
-};
 
-/*
- * Work items for the bdi_writeback threads
- */
-struct bdi_work {
 	struct list_head list;		/* pending work list */
-	struct rcu_head rcu_head;	/* for RCU free/clear of work */
-
-	unsigned long seen;		/* threads that have seen this work */
-	atomic_t pending;		/* number of threads still to do work */
-
-	struct wb_writeback_args args;	/* writeback arguments */
-
-	unsigned long state;		/* flag bits, see WS_* */
+	struct completion *done;	/* set if the caller waits */
 };
 
-enum {
-	WS_USED_B = 0,
-	WS_ONSTACK_B,
-};
-
-#define WS_USED (1 << WS_USED_B)
-#define WS_ONSTACK (1 << WS_ONSTACK_B)
-
-static inline bool bdi_work_on_stack(struct bdi_work *work)
-{
-	return test_bit(WS_ONSTACK_B, &work->state);
-}
-
-static inline void bdi_work_init(struct bdi_work *work,
-				 struct wb_writeback_args *args)
-{
-	INIT_RCU_HEAD(&work->rcu_head);
-	work->args = *args;
-	work->state = WS_USED;
-}
-
 /**
  * writeback_in_progress - determine whether there is writeback in progress
  * @bdi: the device's backing_dev_info structure.
@@ -96,76 +62,11 @@ int writeback_in_progress(struct backing_dev_info *bdi)
 	return !list_empty(&bdi->work_list);
 }
 
-static void bdi_work_clear(struct bdi_work *work)
-{
-	clear_bit(WS_USED_B, &work->state);
-	smp_mb__after_clear_bit();
-	/*
-	 * work can have disappeared at this point. bit waitq functions
-	 * should be able to tolerate this, provided bdi_sched_wait does
-	 * not dereference it's pointer argument.
-	*/
-	wake_up_bit(&work->state, WS_USED_B);
-}
-
-static void bdi_work_free(struct rcu_head *head)
-{
-	struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
-
-	if (!bdi_work_on_stack(work))
-		kfree(work);
-	else
-		bdi_work_clear(work);
-}
-
-static void wb_work_complete(struct bdi_work *work)
-{
-	const enum writeback_sync_modes sync_mode = work->args.sync_mode;
-	int onstack = bdi_work_on_stack(work);
-
-	/*
-	 * For allocated work, we can clear the done/seen bit right here.
-	 * For on-stack work, we need to postpone both the clear and free
-	 * to after the RCU grace period, since the stack could be invalidated
-	 * as soon as bdi_work_clear() has done the wakeup.
-	 */
-	if (!onstack)
-		bdi_work_clear(work);
-	if (sync_mode == WB_SYNC_NONE || onstack)
-		call_rcu(&work->rcu_head, bdi_work_free);
-}
-
-static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
-{
-	/*
-	 * The caller has retrieved the work arguments from this work,
-	 * drop our reference. If this is the last ref, delete and free it
-	 */
-	if (atomic_dec_and_test(&work->pending)) {
-		struct backing_dev_info *bdi = wb->bdi;
-
-		spin_lock(&bdi->wb_lock);
-		list_del_rcu(&work->list);
-		spin_unlock(&bdi->wb_lock);
-
-		wb_work_complete(work);
-	}
-}
-
-static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
+static void bdi_queue_work(struct backing_dev_info *bdi,
+		struct wb_writeback_work *work)
 {
-	work->seen = bdi->wb_mask;
-	BUG_ON(!work->seen);
-	atomic_set(&work->pending, bdi->wb_cnt);
-	BUG_ON(!bdi->wb_cnt);
-
-	/*
-	 * list_add_tail_rcu() contains the necessary barriers to
-	 * make sure the above stores are seen before the item is
-	 * noticed on the list
-	 */
 	spin_lock(&bdi->wb_lock);
-	list_add_tail_rcu(&work->list, &bdi->work_list);
+	list_add_tail(&work->list, &bdi->work_list);
 	spin_unlock(&bdi->wb_lock);
 
 	/*
@@ -182,107 +83,59 @@ static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
 	}
 }
 
-/*
- * Used for on-stack allocated work items. The caller needs to wait until
- * the wb threads have acked the work before it's safe to continue.
- */
-static void bdi_wait_on_work_clear(struct bdi_work *work)
-{
-	wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
-		    TASK_UNINTERRUPTIBLE);
-}
-
-static void bdi_alloc_queue_work(struct backing_dev_info *bdi,
-				 struct wb_writeback_args *args,
-				 int wait)
+static void
+__bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+		bool range_cyclic, bool for_background)
 {
-	struct bdi_work *work;
+	struct wb_writeback_work *work;
 
 	/*
 	 * This is WB_SYNC_NONE writeback, so if allocation fails just
 	 * wakeup the thread for old dirty data writeback
 	 */
-	work = kmalloc(sizeof(*work), GFP_ATOMIC);
-	if (work) {
-		bdi_work_init(work, args);
-		bdi_queue_work(bdi, work);
-		if (wait)
-			bdi_wait_on_work_clear(work);
-	} else {
-		struct bdi_writeback *wb = &bdi->wb;
-
-		if (wb->task)
-			wake_up_process(wb->task);
+	work = kzalloc(sizeof(*work), GFP_ATOMIC);
+	if (!work) {
+		if (bdi->wb.task)
+			wake_up_process(bdi->wb.task);
+		return;
 	}
+
+	work->sync_mode	= WB_SYNC_NONE;
+	work->nr_pages	= nr_pages;
+	work->range_cyclic = range_cyclic;
+	work->for_background = for_background;
+
+	bdi_queue_work(bdi, work);
 }
 
 /**
- * bdi_sync_writeback - start and wait for writeback
+ * bdi_start_writeback - start writeback
  * @bdi: the backing device to write from
- * @sb: write inodes from this super_block
+ * @nr_pages: the number of pages to write
  *
  * Description:
- *   This does WB_SYNC_ALL data integrity writeback and waits for the
- *   IO to complete. Callers must hold the sb s_umount semaphore for
- *   reading, to avoid having the super disappear before we are done.
+ *   This does WB_SYNC_NONE opportunistic writeback. The IO is only
+ *   started when this function returns, we make no guarentees on
+ *   completion. Caller need not hold sb s_umount semaphore.
+ *
  */
-static void bdi_sync_writeback(struct backing_dev_info *bdi,
-			       struct super_block *sb)
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
 {
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.sync_mode	= WB_SYNC_ALL,
-		.nr_pages	= LONG_MAX,
-		.range_cyclic	= 0,
-		/*
-		 * Setting sb_pinned is not necessary for WB_SYNC_ALL, but
-		 * lets make it explicitly clear.
-		 */
-		.sb_pinned	= 1,
-	};
-	struct bdi_work work;
-
-	bdi_work_init(&work, &args);
-	work.state |= WS_ONSTACK;
-
-	bdi_queue_work(bdi, &work);
-	bdi_wait_on_work_clear(&work);
+	__bdi_start_writeback(bdi, nr_pages, true, false);
 }
 
 /**
- * bdi_start_writeback - start writeback
+ * bdi_start_background_writeback - start background writeback
  * @bdi: the backing device to write from
- * @sb: write inodes from this super_block
- * @nr_pages: the number of pages to write
- * @sb_locked: caller already holds sb umount sem.
  *
  * Description:
- *   This does WB_SYNC_NONE opportunistic writeback. The IO is only
+ *   This does WB_SYNC_NONE background writeback. The IO is only
  *   started when this function returns, we make no guarentees on
- *   completion. Caller specifies whether sb umount sem is held already or not.
- *
+ *   completion. Caller need not hold sb s_umount semaphore.
  */
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
-			 long nr_pages, int sb_locked)
+void bdi_start_background_writeback(struct backing_dev_info *bdi)
 {
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.sync_mode	= WB_SYNC_NONE,
-		.nr_pages	= nr_pages,
-		.range_cyclic	= 1,
-		.sb_pinned	= sb_locked,
-	};
-
-	/*
-	 * We treat @nr_pages=0 as the special case to do background writeback,
-	 * ie. to sync pages until the background dirty threshold is reached.
-	 */
-	if (!nr_pages) {
-		args.nr_pages = LONG_MAX;
-		args.for_background = 1;
-	}
-
-	bdi_alloc_queue_work(bdi, &args, sb_locked);
+	__bdi_start_writeback(bdi, LONG_MAX, true, true);
 }
 
 /*
@@ -572,75 +425,69 @@ select_queue:
 	return ret;
 }
 
-static void unpin_sb_for_writeback(struct super_block *sb)
-{
-	up_read(&sb->s_umount);
-	put_super(sb);
-}
-
-enum sb_pin_state {
-	SB_PINNED,
-	SB_NOT_PINNED,
-	SB_PIN_FAILED
-};
-
 /*
- * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * For background writeback the caller does not have the sb pinned
  * before calling writeback. So make sure that we do pin it, so it doesn't
  * go away while we are writing inodes from it.
  */
-static enum sb_pin_state pin_sb_for_writeback(struct writeback_control *wbc,
-					      struct super_block *sb)
+static bool pin_sb_for_writeback(struct super_block *sb)
 {
-	/*
-	 * Caller must already hold the ref for this
-	 */
-	if (wbc->sync_mode == WB_SYNC_ALL || wbc->sb_pinned) {
-		WARN_ON(!rwsem_is_locked(&sb->s_umount));
-		return SB_NOT_PINNED;
-	}
 	spin_lock(&sb_lock);
+	if (list_empty(&sb->s_instances)) {
+		spin_unlock(&sb_lock);
+		return false;
+	}
+
 	sb->s_count++;
+	spin_unlock(&sb_lock);
+
 	if (down_read_trylock(&sb->s_umount)) {
-		if (sb->s_root) {
-			spin_unlock(&sb_lock);
-			return SB_PINNED;
-		}
-		/*
-		 * umounted, drop rwsem again and fall through to failure
-		 */
+		if (sb->s_root)
+			return true;
 		up_read(&sb->s_umount);
 	}
-	sb->s_count--;
-	spin_unlock(&sb_lock);
-	return SB_PIN_FAILED;
+
+	put_super(sb);
+	return false;
 }
 
 /*
  * Write a portion of b_io inodes which belong to @sb.
- * If @wbc->sb != NULL, then find and write all such
+ *
+ * If @only_this_sb is true, then find and write all such
  * inodes. Otherwise write only ones which go sequentially
  * in reverse order.
+ *
  * Return 1, if the caller writeback routine should be
  * interrupted. Otherwise return 0.
  */
-static int writeback_sb_inodes(struct super_block *sb,
-			       struct bdi_writeback *wb,
-			       struct writeback_control *wbc)
+static int writeback_sb_inodes(struct super_block *sb, struct bdi_writeback *wb,
+		struct writeback_control *wbc, bool only_this_sb)
 {
 	while (!list_empty(&wb->b_io)) {
 		long pages_skipped;
 		struct inode *inode = list_entry(wb->b_io.prev,
 						 struct inode, i_list);
-		if (wbc->sb && sb != inode->i_sb) {
-			/* super block given and doesn't
-			   match, skip this inode */
-			redirty_tail(inode);
-			continue;
-		}
-		if (sb != inode->i_sb)
-			/* finish with this superblock */
+
+		if (inode->i_sb != sb) {
+			if (only_this_sb) {
+				/*
+				 * We only want to write back data for this
+				 * superblock, move all inodes not belonging
+				 * to it back onto the dirty list.
+				 */
+				redirty_tail(inode);
+				continue;
+			}
+
+			/*
+			 * The inode belongs to a different superblock.
+			 * Bounce back to the caller to unpin this and
+			 * pin the next superblock.
+			 */
 			return 0;
+		}
+
 		if (inode->i_state & (I_NEW | I_WILL_FREE)) {
 			requeue_io(inode);
 			continue;
@@ -678,8 +525,8 @@ static int writeback_sb_inodes(struct super_block *sb,
 	return 1;
 }
 
-static void writeback_inodes_wb(struct bdi_writeback *wb,
-				struct writeback_control *wbc)
+void writeback_inodes_wb(struct bdi_writeback *wb,
+		struct writeback_control *wbc)
 {
 	int ret = 0;
 
@@ -692,24 +539,14 @@ static void writeback_inodes_wb(struct bdi_writeback *wb,
 		struct inode *inode = list_entry(wb->b_io.prev,
 						 struct inode, i_list);
 		struct super_block *sb = inode->i_sb;
-		enum sb_pin_state state;
-
-		if (wbc->sb && sb != wbc->sb) {
-			/* super block given and doesn't
-			   match, skip this inode */
-			redirty_tail(inode);
-			continue;
-		}
-		state = pin_sb_for_writeback(wbc, sb);
 
-		if (state == SB_PIN_FAILED) {
+		if (!pin_sb_for_writeback(sb)) {
 			requeue_io(inode);
 			continue;
 		}
-		ret = writeback_sb_inodes(sb, wb, wbc);
+		ret = writeback_sb_inodes(sb, wb, wbc, false);
+		drop_super(sb);
 
-		if (state == SB_PINNED)
-			unpin_sb_for_writeback(sb);
 		if (ret)
 			break;
 	}
@@ -717,11 +554,17 @@ static void writeback_inodes_wb(struct bdi_writeback *wb,
 	/* Leave any unwritten inodes on b_io */
 }
 
-void writeback_inodes_wbc(struct writeback_control *wbc)
+static void __writeback_inodes_sb(struct super_block *sb,
+		struct bdi_writeback *wb, struct writeback_control *wbc)
 {
-	struct backing_dev_info *bdi = wbc->bdi;
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
 
-	writeback_inodes_wb(&bdi->wb, wbc);
+	wbc->wb_start = jiffies; /* livelock avoidance */
+	spin_lock(&inode_lock);
+	if (!wbc->for_kupdate || list_empty(&wb->b_io))
+		queue_io(wb, wbc->older_than_this);
+	writeback_sb_inodes(sb, wb, wbc, true);
+	spin_unlock(&inode_lock);
 }
 
 /*
@@ -759,17 +602,14 @@ static inline bool over_bground_thresh(void)
  * all dirty pages if they are all attached to "old" mappings.
  */
 static long wb_writeback(struct bdi_writeback *wb,
-			 struct wb_writeback_args *args)
+			 struct wb_writeback_work *work)
 {
 	struct writeback_control wbc = {
-		.bdi			= wb->bdi,
-		.sb			= args->sb,
-		.sync_mode		= args->sync_mode,
+		.sync_mode		= work->sync_mode,
 		.older_than_this	= NULL,
-		.for_kupdate		= args->for_kupdate,
-		.for_background		= args->for_background,
-		.range_cyclic		= args->range_cyclic,
-		.sb_pinned		= args->sb_pinned,
+		.for_kupdate		= work->for_kupdate,
+		.for_background		= work->for_background,
+		.range_cyclic		= work->range_cyclic,
 	};
 	unsigned long oldest_jif;
 	long wrote = 0;
@@ -789,21 +629,24 @@ static long wb_writeback(struct bdi_writeback *wb,
 		/*
 		 * Stop writeback when nr_pages has been consumed
 		 */
-		if (args->nr_pages <= 0)
+		if (work->nr_pages <= 0)
 			break;
 
 		/*
 		 * For background writeout, stop when we are below the
 		 * background dirty threshold
 		 */
-		if (args->for_background && !over_bground_thresh())
+		if (work->for_background && !over_bground_thresh())
 			break;
 
 		wbc.more_io = 0;
 		wbc.nr_to_write = MAX_WRITEBACK_PAGES;
 		wbc.pages_skipped = 0;
-		writeback_inodes_wb(wb, &wbc);
-		args->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+		if (work->sb)
+			__writeback_inodes_sb(work->sb, wb, &wbc);
+		else
+			writeback_inodes_wb(wb, &wbc);
+		work->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 		wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 
 		/*
@@ -839,31 +682,21 @@ static long wb_writeback(struct bdi_writeback *wb,
 }
 
 /*
- * Return the next bdi_work struct that hasn't been processed by this
- * wb thread yet. ->seen is initially set for each thread that exists
- * for this device, when a thread first notices a piece of work it
- * clears its bit. Depending on writeback type, the thread will notify
- * completion on either receiving the work (WB_SYNC_NONE) or after
- * it is done (WB_SYNC_ALL).
+ * Return the next wb_writeback_work struct that hasn't been processed yet.
  */
-static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
-					   struct bdi_writeback *wb)
+static struct wb_writeback_work *
+get_next_work_item(struct backing_dev_info *bdi, struct bdi_writeback *wb)
 {
-	struct bdi_work *work, *ret = NULL;
+	struct wb_writeback_work *work = NULL;
 
-	rcu_read_lock();
-
-	list_for_each_entry_rcu(work, &bdi->work_list, list) {
-		if (!test_bit(wb->nr, &work->seen))
-			continue;
-		clear_bit(wb->nr, &work->seen);
-
-		ret = work;
-		break;
+	spin_lock(&bdi->wb_lock);
+	if (!list_empty(&bdi->work_list)) {
+		work = list_entry(bdi->work_list.next,
+				  struct wb_writeback_work, list);
+		list_del_init(&work->list);
 	}
-
-	rcu_read_unlock();
-	return ret;
+	spin_unlock(&bdi->wb_lock);
+	return work;
 }
 
 static long wb_check_old_data_flush(struct bdi_writeback *wb)
@@ -888,14 +721,14 @@ static long wb_check_old_data_flush(struct bdi_writeback *wb)
 			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
 
 	if (nr_pages) {
-		struct wb_writeback_args args = {
+		struct wb_writeback_work work = {
 			.nr_pages	= nr_pages,
 			.sync_mode	= WB_SYNC_NONE,
 			.for_kupdate	= 1,
 			.range_cyclic	= 1,
 		};
 
-		return wb_writeback(wb, &args);
+		return wb_writeback(wb, &work);
 	}
 
 	return 0;
@@ -907,36 +740,27 @@ static long wb_check_old_data_flush(struct bdi_writeback *wb)
 long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
 {
 	struct backing_dev_info *bdi = wb->bdi;
-	struct bdi_work *work;
+	struct wb_writeback_work *work;
 	long wrote = 0;
 
 	while ((work = get_next_work_item(bdi, wb)) != NULL) {
-		struct wb_writeback_args args = work->args;
-		int post_clear;
-
 		/*
 		 * Override sync mode, in case we must wait for completion
+		 * because this thread is exiting now.
 		 */
 		if (force_wait)
-			work->args.sync_mode = args.sync_mode = WB_SYNC_ALL;
-
-		post_clear = WB_SYNC_ALL || args.sb_pinned;
-
-		/*
-		 * If this isn't a data integrity operation, just notify
-		 * that we have seen this work and we are now starting it.
-		 */
-		if (!post_clear)
-			wb_clear_pending(wb, work);
+			work->sync_mode = WB_SYNC_ALL;
 
-		wrote += wb_writeback(wb, &args);
+		wrote += wb_writeback(wb, work);
 
 		/*
-		 * This is a data integrity writeback, so only do the
-		 * notification when we have completed the work.
+		 * Notify the caller of completion if this is a synchronous
+		 * work item, otherwise just free it.
 		 */
-		if (post_clear)
-			wb_clear_pending(wb, work);
+		if (work->done)
+			complete(work->done);
+		else
+			kfree(work);
 	}
 
 	/*
@@ -993,42 +817,27 @@ int bdi_writeback_task(struct bdi_writeback *wb)
 }
 
 /*
- * Schedule writeback for all backing devices. This does WB_SYNC_NONE
- * writeback, for integrity writeback see bdi_sync_writeback().
+ * Start writeback of `nr_pages' pages.  If `nr_pages' is zero, write back
+ * the whole world.
  */
-static void bdi_writeback_all(struct super_block *sb, long nr_pages)
+void wakeup_flusher_threads(long nr_pages)
 {
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.nr_pages	= nr_pages,
-		.sync_mode	= WB_SYNC_NONE,
-	};
 	struct backing_dev_info *bdi;
 
-	rcu_read_lock();
+	if (!nr_pages) {
+		nr_pages = global_page_state(NR_FILE_DIRTY) +
+				global_page_state(NR_UNSTABLE_NFS);
+	}
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
 		if (!bdi_has_dirty_io(bdi))
 			continue;
-
-		bdi_alloc_queue_work(bdi, &args, 0);
+		__bdi_start_writeback(bdi, nr_pages, false, false);
 	}
-
 	rcu_read_unlock();
 }
 
-/*
- * Start writeback of `nr_pages' pages.  If `nr_pages' is zero, write back
- * the whole world.
- */
-void wakeup_flusher_threads(long nr_pages)
-{
-	if (nr_pages == 0)
-		nr_pages = global_page_state(NR_FILE_DIRTY) +
-				global_page_state(NR_UNSTABLE_NFS);
-	bdi_writeback_all(NULL, nr_pages);
-}
-
 static noinline void block_dump___mark_inode_dirty(struct inode *inode)
 {
 	if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
@@ -1220,18 +1029,6 @@ static void wait_sb_inodes(struct super_block *sb)
 	iput(old_inode);
 }
 
-static void __writeback_inodes_sb(struct super_block *sb, int sb_locked)
-{
-	unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
-	unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
-	long nr_to_write;
-
-	nr_to_write = nr_dirty + nr_unstable +
-			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
-
-	bdi_start_writeback(sb->s_bdi, sb, nr_to_write, sb_locked);
-}
-
 /**
  * writeback_inodes_sb	-	writeback dirty inodes from given super_block
  * @sb: the superblock
@@ -1243,21 +1040,24 @@ static void __writeback_inodes_sb(struct super_block *sb, int sb_locked)
  */
 void writeback_inodes_sb(struct super_block *sb)
 {
-	__writeback_inodes_sb(sb, 0);
-}
-EXPORT_SYMBOL(writeback_inodes_sb);
+	unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+	unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+	DECLARE_COMPLETION_ONSTACK(done);
+	struct wb_writeback_work work = {
+		.sb		= sb,
+		.sync_mode	= WB_SYNC_NONE,
+		.done		= &done,
+	};
 
-/**
- * writeback_inodes_sb_locked	- writeback dirty inodes from given super_block
- * @sb: the superblock
- *
- * Like writeback_inodes_sb(), except the caller already holds the
- * sb umount sem.
- */
-void writeback_inodes_sb_locked(struct super_block *sb)
-{
-	__writeback_inodes_sb(sb, 1);
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	work.nr_pages = nr_dirty + nr_unstable +
+			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+	bdi_queue_work(sb->s_bdi, &work);
+	wait_for_completion(&done);
 }
+EXPORT_SYMBOL(writeback_inodes_sb);
 
 /**
  * writeback_inodes_sb_if_idle	-	start writeback if none underway
@@ -1269,7 +1069,9 @@ void writeback_inodes_sb_locked(struct super_block *sb)
 int writeback_inodes_sb_if_idle(struct super_block *sb)
 {
 	if (!writeback_in_progress(sb->s_bdi)) {
+		down_read(&sb->s_umount);
 		writeback_inodes_sb(sb);
+		up_read(&sb->s_umount);
 		return 1;
 	} else
 		return 0;
@@ -1285,7 +1087,20 @@ EXPORT_SYMBOL(writeback_inodes_sb_if_idle);
  */
 void sync_inodes_sb(struct super_block *sb)
 {
-	bdi_sync_writeback(sb->s_bdi, sb);
+	DECLARE_COMPLETION_ONSTACK(done);
+	struct wb_writeback_work work = {
+		.sb		= sb,
+		.sync_mode	= WB_SYNC_ALL,
+		.nr_pages	= LONG_MAX,
+		.range_cyclic	= 0,
+		.done		= &done,
+	};
+
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	bdi_queue_work(sb->s_bdi, &work);
+	wait_for_completion(&done);
+
 	wait_sb_inodes(sb);
 }
 EXPORT_SYMBOL(sync_inodes_sb);
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index 47aefd376e5..723b889fd21 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -710,30 +710,26 @@ static void fscache_write_op(struct fscache_operation *_op)
 		goto superseded;
 	}
 
-	if (page) {
-		radix_tree_tag_set(&cookie->stores, page->index,
-				   FSCACHE_COOKIE_STORING_TAG);
-		radix_tree_tag_clear(&cookie->stores, page->index,
-				     FSCACHE_COOKIE_PENDING_TAG);
-	}
+	radix_tree_tag_set(&cookie->stores, page->index,
+			   FSCACHE_COOKIE_STORING_TAG);
+	radix_tree_tag_clear(&cookie->stores, page->index,
+			     FSCACHE_COOKIE_PENDING_TAG);
 
 	spin_unlock(&cookie->stores_lock);
 	spin_unlock(&object->lock);
 
-	if (page) {
-		fscache_set_op_state(&op->op, "Store");
-		fscache_stat(&fscache_n_store_pages);
-		fscache_stat(&fscache_n_cop_write_page);
-		ret = object->cache->ops->write_page(op, page);
-		fscache_stat_d(&fscache_n_cop_write_page);
-		fscache_set_op_state(&op->op, "EndWrite");
-		fscache_end_page_write(object, page);
-		if (ret < 0) {
-			fscache_set_op_state(&op->op, "Abort");
-			fscache_abort_object(object);
-		} else {
-			fscache_enqueue_operation(&op->op);
-		}
+	fscache_set_op_state(&op->op, "Store");
+	fscache_stat(&fscache_n_store_pages);
+	fscache_stat(&fscache_n_cop_write_page);
+	ret = object->cache->ops->write_page(op, page);
+	fscache_stat_d(&fscache_n_cop_write_page);
+	fscache_set_op_state(&op->op, "EndWrite");
+	fscache_end_page_write(object, page);
+	if (ret < 0) {
+		fscache_set_op_state(&op->op, "Abort");
+		fscache_abort_object(object);
+	} else {
+		fscache_enqueue_operation(&op->op);
 	}
 
 	_leave("");
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 3cdc5f78a40..431be0795b6 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1016,7 +1016,7 @@ static int fuse_permission(struct inode *inode, int mask)
 		   exist.  So if permissions are revoked this won't be
 		   noticed immediately, only after the attribute
 		   timeout has expired */
-	} else if (mask & MAY_ACCESS) {
+	} else if (mask & (MAY_ACCESS | MAY_CHDIR)) {
 		err = fuse_access(inode, mask);
 	} else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		if (!(inode->i_mode & S_IXUGO)) {
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 9f8b52500d6..5e96cbd8a45 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -136,10 +136,7 @@ static int gfs2_writeback_writepage(struct page *page,
 	if (ret <= 0)
 		return ret;
 
-	ret = mpage_writepage(page, gfs2_get_block_noalloc, wbc);
-	if (ret == -EAGAIN)
-		ret = block_write_full_page(page, gfs2_get_block_noalloc, wbc);
-	return ret;
+	return nobh_writepage(page, gfs2_get_block_noalloc, wbc);
 }
 
 /**
@@ -637,9 +634,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 		}
 	}
 
-	error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
-	if (error)
-		goto out_unlock;
+	alloc_required = gfs2_write_alloc_required(ip, pos, len);
 
 	if (alloc_required || gfs2_is_jdata(ip))
 		gfs2_write_calc_reserv(ip, len, &data_blocks, &ind_blocks);
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 4a48c0f4b40..6f482809d1a 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1040,7 +1040,8 @@ static int trunc_start(struct gfs2_inode *ip, u64 size)
 		goto out;
 
 	if (gfs2_is_stuffed(ip)) {
-		u64 dsize = size + sizeof(struct gfs2_inode);
+		u64 dsize = size + sizeof(struct gfs2_dinode);
+		ip->i_disksize = size;
 		ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
 		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
 		gfs2_dinode_out(ip, dibh->b_data);
@@ -1243,13 +1244,12 @@ int gfs2_file_dealloc(struct gfs2_inode *ip)
  * @ip: the file being written to
  * @offset: the offset to write to
  * @len: the number of bytes being written
- * @alloc_required: set to 1 if an alloc is required, 0 otherwise
  *
- * Returns: errno
+ * Returns: 1 if an alloc is required, 0 otherwise
  */
 
 int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
-			      unsigned int len, int *alloc_required)
+			      unsigned int len)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct buffer_head bh;
@@ -1257,26 +1257,23 @@ int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
 	u64 lblock, lblock_stop, size;
 	u64 end_of_file;
 
-	*alloc_required = 0;
-
 	if (!len)
 		return 0;
 
 	if (gfs2_is_stuffed(ip)) {
 		if (offset + len >
 		    sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode))
-			*alloc_required = 1;
+			return 1;
 		return 0;
 	}
 
-	*alloc_required = 1;
 	shift = sdp->sd_sb.sb_bsize_shift;
 	BUG_ON(gfs2_is_dir(ip));
 	end_of_file = (ip->i_disksize + sdp->sd_sb.sb_bsize - 1) >> shift;
 	lblock = offset >> shift;
 	lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift;
 	if (lblock_stop > end_of_file)
-		return 0;
+		return 1;
 
 	size = (lblock_stop - lblock) << shift;
 	do {
@@ -1284,12 +1281,11 @@ int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
 		bh.b_size = size;
 		gfs2_block_map(&ip->i_inode, lblock, &bh, 0);
 		if (!buffer_mapped(&bh))
-			return 0;
+			return 1;
 		size -= bh.b_size;
 		lblock += (bh.b_size >> ip->i_inode.i_blkbits);
 	} while(size > 0);
 
-	*alloc_required = 0;
 	return 0;
 }
 
diff --git a/fs/gfs2/bmap.h b/fs/gfs2/bmap.h
index c983177e05a..a20a5213135 100644
--- a/fs/gfs2/bmap.h
+++ b/fs/gfs2/bmap.h
@@ -52,6 +52,6 @@ int gfs2_truncatei(struct gfs2_inode *ip, u64 size);
 int gfs2_truncatei_resume(struct gfs2_inode *ip);
 int gfs2_file_dealloc(struct gfs2_inode *ip);
 int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
-			      unsigned int len, int *alloc_required);
+			      unsigned int len);
 
 #endif /* __BMAP_DOT_H__ */
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 8295c5b5d4a..b9dd88a78dd 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -392,7 +392,7 @@ static int gfs2_dirent_find_space(const struct gfs2_dirent *dent,
 	unsigned totlen = be16_to_cpu(dent->de_rec_len);
 
 	if (gfs2_dirent_sentinel(dent))
-		actual = GFS2_DIRENT_SIZE(0);
+		actual = 0;
 	if (totlen - actual >= required)
 		return 1;
 	return 0;
@@ -955,7 +955,12 @@ static int dir_split_leaf(struct inode *inode, const struct qstr *name)
 	/* Change the pointers.
 	   Don't bother distinguishing stuffed from non-stuffed.
 	   This code is complicated enough already. */
-	lp = kmalloc(half_len * sizeof(__be64), GFP_NOFS | __GFP_NOFAIL);
+	lp = kmalloc(half_len * sizeof(__be64), GFP_NOFS);
+	if (!lp) {
+		error = -ENOMEM;
+		goto fail_brelse;
+	}
+
 	/*  Change the pointers  */
 	for (x = 0; x < half_len; x++)
 		lp[x] = cpu_to_be64(bn);
@@ -1063,7 +1068,9 @@ static int dir_double_exhash(struct gfs2_inode *dip)
 
 	/*  Allocate both the "from" and "to" buffers in one big chunk  */
 
-	buf = kcalloc(3, sdp->sd_hash_bsize, GFP_NOFS | __GFP_NOFAIL);
+	buf = kcalloc(3, sdp->sd_hash_bsize, GFP_NOFS);
+	if (!buf)
+		return -ENOMEM;
 
 	for (block = dip->i_disksize >> sdp->sd_hash_bsize_shift; block--;) {
 		error = gfs2_dir_read_data(dip, (char *)buf,
@@ -1231,6 +1238,25 @@ static int do_filldir_main(struct gfs2_inode *dip, u64 *offset,
 	return 0;
 }
 
+static void *gfs2_alloc_sort_buffer(unsigned size)
+{
+	void *ptr = NULL;
+
+	if (size < KMALLOC_MAX_SIZE)
+		ptr = kmalloc(size, GFP_NOFS | __GFP_NOWARN);
+	if (!ptr)
+		ptr = __vmalloc(size, GFP_NOFS, PAGE_KERNEL);
+	return ptr;
+}
+
+static void gfs2_free_sort_buffer(void *ptr)
+{
+	if (is_vmalloc_addr(ptr))
+		vfree(ptr);
+	else
+		kfree(ptr);
+}
+
 static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 			      filldir_t filldir, int *copied, unsigned *depth,
 			      u64 leaf_no)
@@ -1271,7 +1297,7 @@ static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 	 * 99 is the maximum number of entries that can fit in a single
 	 * leaf block.
 	 */
-	larr = vmalloc((leaves + entries + 99) * sizeof(void *));
+	larr = gfs2_alloc_sort_buffer((leaves + entries + 99) * sizeof(void *));
 	if (!larr)
 		goto out;
 	darr = (const struct gfs2_dirent **)(larr + leaves);
@@ -1282,7 +1308,7 @@ static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 	do {
 		error = get_leaf(ip, lfn, &bh);
 		if (error)
-			goto out_kfree;
+			goto out_free;
 		lf = (struct gfs2_leaf *)bh->b_data;
 		lfn = be64_to_cpu(lf->lf_next);
 		if (lf->lf_entries) {
@@ -1291,7 +1317,7 @@ static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 						gfs2_dirent_gather, NULL, &g);
 			error = PTR_ERR(dent);
 			if (IS_ERR(dent))
-				goto out_kfree;
+				goto out_free;
 			if (entries2 != g.offset) {
 				fs_warn(sdp, "Number of entries corrupt in dir "
 						"leaf %llu, entries2 (%u) != "
@@ -1300,7 +1326,7 @@ static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 					entries2, g.offset);
 					
 				error = -EIO;
-				goto out_kfree;
+				goto out_free;
 			}
 			error = 0;
 			larr[leaf++] = bh;
@@ -1312,10 +1338,10 @@ static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 	BUG_ON(entries2 != entries);
 	error = do_filldir_main(ip, offset, opaque, filldir, darr,
 				entries, copied);
-out_kfree:
+out_free:
 	for(i = 0; i < leaf; i++)
 		brelse(larr[i]);
-	vfree(larr);
+	gfs2_free_sort_buffer(larr);
 out:
 	return error;
 }
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index ed9a94f0ef1..4edd662c823 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -351,7 +351,6 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	unsigned long last_index;
 	u64 pos = page->index << PAGE_CACHE_SHIFT;
 	unsigned int data_blocks, ind_blocks, rblocks;
-	int alloc_required = 0;
 	struct gfs2_holder gh;
 	struct gfs2_alloc *al;
 	int ret;
@@ -364,8 +363,7 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	set_bit(GLF_DIRTY, &ip->i_gl->gl_flags);
 	set_bit(GIF_SW_PAGED, &ip->i_flags);
 
-	ret = gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE, &alloc_required);
-	if (ret || !alloc_required)
+	if (!gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE))
 		goto out_unlock;
 	ret = -ENOMEM;
 	al = gfs2_alloc_get(ip);
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ddcdbf49353..9adf8f924e0 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -328,6 +328,30 @@ static void gfs2_holder_wake(struct gfs2_holder *gh)
 }
 
 /**
+ * do_error - Something unexpected has happened during a lock request
+ *
+ */
+
+static inline void do_error(struct gfs2_glock *gl, const int ret)
+{
+	struct gfs2_holder *gh, *tmp;
+
+	list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
+		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
+			continue;
+		if (ret & LM_OUT_ERROR)
+			gh->gh_error = -EIO;
+		else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
+			gh->gh_error = GLR_TRYFAILED;
+		else
+			continue;
+		list_del_init(&gh->gh_list);
+		trace_gfs2_glock_queue(gh, 0);
+		gfs2_holder_wake(gh);
+	}
+}
+
+/**
  * do_promote - promote as many requests as possible on the current queue
  * @gl: The glock
  * 
@@ -375,36 +399,13 @@ restart:
 		}
 		if (gh->gh_list.prev == &gl->gl_holders)
 			return 1;
+		do_error(gl, 0);
 		break;
 	}
 	return 0;
 }
 
 /**
- * do_error - Something unexpected has happened during a lock request
- *
- */
-
-static inline void do_error(struct gfs2_glock *gl, const int ret)
-{
-	struct gfs2_holder *gh, *tmp;
-
-	list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
-		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
-			continue;
-		if (ret & LM_OUT_ERROR)
-			gh->gh_error = -EIO;
-		else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
-			gh->gh_error = GLR_TRYFAILED;
-		else
-			continue;
-		list_del_init(&gh->gh_list);
-		trace_gfs2_glock_queue(gh, 0);
-		gfs2_holder_wake(gh);
-	}
-}
-
-/**
  * find_first_waiter - find the first gh that's waiting for the glock
  * @gl: the glock
  */
@@ -1062,6 +1063,9 @@ int gfs2_glock_nq(struct gfs2_holder *gh)
 
 	spin_lock(&gl->gl_spin);
 	add_to_queue(gh);
+	if ((LM_FLAG_NOEXP & gh->gh_flags) &&
+	    test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
+		set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
 	run_queue(gl, 1);
 	spin_unlock(&gl->gl_spin);
 
@@ -1319,6 +1323,36 @@ void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state)
 }
 
 /**
+ * gfs2_should_freeze - Figure out if glock should be frozen
+ * @gl: The glock in question
+ *
+ * Glocks are not frozen if (a) the result of the dlm operation is
+ * an error, (b) the locking operation was an unlock operation or
+ * (c) if there is a "noexp" flagged request anywhere in the queue
+ *
+ * Returns: 1 if freezing should occur, 0 otherwise
+ */
+
+static int gfs2_should_freeze(const struct gfs2_glock *gl)
+{
+	const struct gfs2_holder *gh;
+
+	if (gl->gl_reply & ~LM_OUT_ST_MASK)
+		return 0;
+	if (gl->gl_target == LM_ST_UNLOCKED)
+		return 0;
+
+	list_for_each_entry(gh, &gl->gl_holders, gh_list) {
+		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
+			continue;
+		if (LM_FLAG_NOEXP & gh->gh_flags)
+			return 0;
+	}
+
+	return 1;
+}
+
+/**
  * gfs2_glock_complete - Callback used by locking
  * @gl: Pointer to the glock
  * @ret: The return value from the dlm
@@ -1328,18 +1362,17 @@ void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state)
 void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 {
 	struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
+
 	gl->gl_reply = ret;
+
 	if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_flags))) {
-		struct gfs2_holder *gh;
 		spin_lock(&gl->gl_spin);
-		gh = find_first_waiter(gl);
-		if ((!(gh && (gh->gh_flags & LM_FLAG_NOEXP)) &&
-		     (gl->gl_target != LM_ST_UNLOCKED)) ||
-		    ((ret & ~LM_OUT_ST_MASK) != 0))
+		if (gfs2_should_freeze(gl)) {
 			set_bit(GLF_FROZEN, &gl->gl_flags);
-		spin_unlock(&gl->gl_spin);
-		if (test_bit(GLF_FROZEN, &gl->gl_flags))
+			spin_unlock(&gl->gl_spin);
 			return;
+		}
+		spin_unlock(&gl->gl_spin);
 	}
 	set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
 	gfs2_glock_hold(gl);
@@ -1348,7 +1381,7 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 }
 
 
-static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
+static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	struct gfs2_glock *gl;
 	int may_demote;
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index b5d7363b22d..8fcbce48a12 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -460,6 +460,7 @@ enum {
 	SDF_NOBARRIERS		= 3,
 	SDF_NORECOVERY		= 4,
 	SDF_DEMOTE		= 5,
+	SDF_NOJOURNALID		= 6,
 };
 
 #define GFS2_FSNAME_LEN		256
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index b5612cbb62a..f03afd9c44b 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -169,7 +169,7 @@ struct inode *gfs2_inode_lookup(struct super_block *sb,
 {
 	struct inode *inode;
 	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl;
+	struct gfs2_glock *io_gl = NULL;
 	int error;
 
 	inode = gfs2_iget(sb, no_addr);
@@ -198,6 +198,7 @@ struct inode *gfs2_inode_lookup(struct super_block *sb,
 		ip->i_iopen_gh.gh_gl->gl_object = ip;
 
 		gfs2_glock_put(io_gl);
+		io_gl = NULL;
 
 		if ((type == DT_UNKNOWN) && (no_formal_ino == 0))
 			goto gfs2_nfsbypass;
@@ -228,7 +229,8 @@ gfs2_nfsbypass:
 fail_glock:
 	gfs2_glock_dq(&ip->i_iopen_gh);
 fail_iopen:
-	gfs2_glock_put(io_gl);
+	if (io_gl)
+		gfs2_glock_put(io_gl);
 fail_put:
 	if (inode->i_state & I_NEW)
 		ip->i_gl->gl_object = NULL;
@@ -256,7 +258,7 @@ void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
 {
 	struct gfs2_sbd *sdp;
 	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl;
+	struct gfs2_glock *io_gl = NULL;
 	int error;
 	struct gfs2_holder gh;
 	struct inode *inode;
@@ -293,6 +295,7 @@ void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
 
 	ip->i_iopen_gh.gh_gl->gl_object = ip;
 	gfs2_glock_put(io_gl);
+	io_gl = NULL;
 
 	inode->i_mode = DT2IF(DT_UNKNOWN);
 
@@ -319,7 +322,8 @@ void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
 fail_glock:
 	gfs2_glock_dq(&ip->i_iopen_gh);
 fail_iopen:
-	gfs2_glock_put(io_gl);
+	if (io_gl)
+		gfs2_glock_put(io_gl);
 fail_put:
 	ip->i_gl->gl_object = NULL;
 	gfs2_glock_put(ip->i_gl);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3593b3a7290..45a4a36195d 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -76,7 +76,7 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
 
 	sb->s_fs_info = sdp;
 	sdp->sd_vfs = sb;
-
+	set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
 	gfs2_tune_init(&sdp->sd_tune);
 
 	init_waitqueue_head(&sdp->sd_glock_wait);
@@ -1050,7 +1050,8 @@ static int gfs2_lm_mount(struct gfs2_sbd *sdp, int silent)
 			ret = match_int(&tmp[0], &option);
 			if (ret || option < 0) 
 				goto hostdata_error;
-			ls->ls_jid = option;
+			if (test_and_clear_bit(SDF_NOJOURNALID, &sdp->sd_flags))
+				ls->ls_jid = option;
 			break;
 		case Opt_id:
 			/* Obsolete, but left for backward compat purposes */
@@ -1102,6 +1103,24 @@ void gfs2_lm_unmount(struct gfs2_sbd *sdp)
 		lm->lm_unmount(sdp);
 }
 
+static int gfs2_journalid_wait(void *word)
+{
+	if (signal_pending(current))
+		return -EINTR;
+	schedule();
+	return 0;
+}
+
+static int wait_on_journal(struct gfs2_sbd *sdp)
+{
+	if (sdp->sd_args.ar_spectator)
+		return 0;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		return 0;
+
+	return wait_on_bit(&sdp->sd_flags, SDF_NOJOURNALID, gfs2_journalid_wait, TASK_INTERRUPTIBLE);
+}
+
 void gfs2_online_uevent(struct gfs2_sbd *sdp)
 {
 	struct super_block *sb = sdp->sd_vfs;
@@ -1194,6 +1213,10 @@ static int fill_super(struct super_block *sb, struct gfs2_args *args, int silent
 	if (error)
 		goto fail_locking;
 
+	error = wait_on_journal(sdp);
+	if (error)
+		goto fail_sb;
+
 	error = init_inodes(sdp, DO);
 	if (error)
 		goto fail_sb;
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 49667d68769..8bb643cb265 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -77,7 +77,7 @@ static LIST_HEAD(qd_lru_list);
 static atomic_t qd_lru_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(qd_lru_lock);
 
-int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
+int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	struct gfs2_quota_data *qd;
 	struct gfs2_sbd *sdp;
@@ -694,10 +694,8 @@ get_a_page:
 		if (!buffer_mapped(bh))
 			goto unlock_out;
 		/* If it's a newly allocated disk block for quota, zero it */
-		if (buffer_new(bh)) {
-			memset(bh->b_data, 0, bh->b_size);
-			set_buffer_uptodate(bh);
-		}
+		if (buffer_new(bh))
+			zero_user(page, pos - blocksize, bh->b_size);
 	}
 
 	if (PageUptodate(page))
@@ -723,7 +721,7 @@ get_a_page:
 
 	/* If quota straddles page boundary, we need to update the rest of the
 	 * quota at the beginning of the next page */
-	if (offset != 0) { /* first page, offset is closer to PAGE_CACHE_SIZE */
+	if ((offset + sizeof(struct gfs2_quota)) > PAGE_CACHE_SIZE) {
 		ptr = ptr + nbytes;
 		nbytes = sizeof(struct gfs2_quota) - nbytes;
 		offset = 0;
@@ -789,15 +787,9 @@ static int do_sync(unsigned int num_qd, struct gfs2_quota_data **qda)
 		goto out;
 
 	for (x = 0; x < num_qd; x++) {
-		int alloc_required;
-
 		offset = qd2offset(qda[x]);
-		error = gfs2_write_alloc_required(ip, offset,
-						  sizeof(struct gfs2_quota),
-						  &alloc_required);
-		if (error)
-			goto out_gunlock;
-		if (alloc_required)
+		if (gfs2_write_alloc_required(ip, offset,
+					      sizeof(struct gfs2_quota)))
 			nalloc++;
 	}
 
@@ -1586,10 +1578,7 @@ static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id,
 		goto out_i;
 
 	offset = qd2offset(qd);
-	error = gfs2_write_alloc_required(ip, offset, sizeof(struct gfs2_quota),
-					  &alloc_required);
-	if (error)
-		goto out_i;
+	alloc_required = gfs2_write_alloc_required(ip, offset, sizeof(struct gfs2_quota));
 	if (alloc_required) {
 		al = gfs2_alloc_get(ip);
 		if (al == NULL)
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 195f60c8bd1..e7d236ca48b 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -51,7 +51,7 @@ static inline int gfs2_quota_lock_check(struct gfs2_inode *ip)
 	return ret;
 }
 
-extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask);
 extern const struct quotactl_ops gfs2_quotactl_ops;
 
 #endif /* __QUOTA_DOT_H__ */
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 4d1aad38f1b..4140811a921 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -342,8 +342,6 @@ int gfs2_jdesc_check(struct gfs2_jdesc *jd)
 {
 	struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
 	struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
-	int ar;
-	int error;
 
 	if (ip->i_disksize < (8 << 20) || ip->i_disksize > (1 << 30) ||
 	    (ip->i_disksize & (sdp->sd_sb.sb_bsize - 1))) {
@@ -352,13 +350,12 @@ int gfs2_jdesc_check(struct gfs2_jdesc *jd)
 	}
 	jd->jd_blocks = ip->i_disksize >> sdp->sd_sb.sb_bsize_shift;
 
-	error = gfs2_write_alloc_required(ip, 0, ip->i_disksize, &ar);
-	if (!error && ar) {
+	if (gfs2_write_alloc_required(ip, 0, ip->i_disksize)) {
 		gfs2_consist_inode(ip);
-		error = -EIO;
+		return -EIO;
 	}
 
-	return error;
+	return 0;
 }
 
 /**
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 37f5393e68e..d019d0d55e0 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -325,6 +325,30 @@ static ssize_t lkfirst_show(struct gfs2_sbd *sdp, char *buf)
 	return sprintf(buf, "%d\n", ls->ls_first);
 }
 
+static ssize_t lkfirst_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
+{
+	unsigned first;
+	int rv;
+
+	rv = sscanf(buf, "%u", &first);
+	if (rv != 1 || first > 1)
+		return -EINVAL;
+	spin_lock(&sdp->sd_jindex_spin);
+	rv = -EBUSY;
+	if (test_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0)
+		goto out;
+	rv = -EINVAL;
+	if (sdp->sd_args.ar_spectator)
+		goto out;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		goto out;
+        sdp->sd_lockstruct.ls_first = first;
+        rv = 0;
+out:
+        spin_unlock(&sdp->sd_jindex_spin);
+        return rv ? rv : len;
+}
+
 static ssize_t first_done_show(struct gfs2_sbd *sdp, char *buf)
 {
 	struct lm_lockstruct *ls = &sdp->sd_lockstruct;
@@ -377,14 +401,41 @@ static ssize_t jid_show(struct gfs2_sbd *sdp, char *buf)
 	return sprintf(buf, "%u\n", sdp->sd_lockstruct.ls_jid);
 }
 
+static ssize_t jid_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
+{
+        unsigned jid;
+	int rv;
+
+	rv = sscanf(buf, "%u", &jid);
+	if (rv != 1)
+		return -EINVAL;
+
+	spin_lock(&sdp->sd_jindex_spin);
+	rv = -EINVAL;
+	if (sdp->sd_args.ar_spectator)
+		goto out;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		goto out;
+	rv = -EBUSY;
+	if (test_and_clear_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0)
+		goto out;
+	sdp->sd_lockstruct.ls_jid = jid;
+	smp_mb__after_clear_bit();
+	wake_up_bit(&sdp->sd_flags, SDF_NOJOURNALID);
+	rv = 0;
+out:
+	spin_unlock(&sdp->sd_jindex_spin);
+	return rv ? rv : len;
+}
+
 #define GDLM_ATTR(_name,_mode,_show,_store) \
 static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
 
 GDLM_ATTR(proto_name,		0444, proto_name_show,		NULL);
 GDLM_ATTR(block,		0644, block_show,		block_store);
 GDLM_ATTR(withdraw,		0644, withdraw_show,		withdraw_store);
-GDLM_ATTR(jid,			0444, jid_show,			NULL);
-GDLM_ATTR(first,		0444, lkfirst_show,		NULL);
+GDLM_ATTR(jid,			0644, jid_show,			jid_store);
+GDLM_ATTR(first,		0644, lkfirst_show,		lkfirst_store);
 GDLM_ATTR(first_done,		0444, first_done_show,		NULL);
 GDLM_ATTR(recover,		0600, NULL,			recover_store);
 GDLM_ATTR(recover_done,		0444, recover_done_show,	NULL);
@@ -564,7 +615,7 @@ static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
 
 	add_uevent_var(env, "LOCKTABLE=%s", sdp->sd_table_name);
 	add_uevent_var(env, "LOCKPROTO=%s", sdp->sd_proto_name);
-	if (!sdp->sd_args.ar_spectator)
+	if (!test_bit(SDF_NOJOURNALID, &sdp->sd_flags))
 		add_uevent_var(env, "JOURNALID=%u", sdp->sd_lockstruct.ls_jid);
 	if (gfs2_uuid_valid(uuid))
 		add_uevent_var(env, "UUID=%pUB", uuid);
diff --git a/fs/inode.c b/fs/inode.c
index 2bee20ae3d6..722860b323a 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -512,7 +512,7 @@ static void prune_icache(int nr_to_scan)
  * This function is passed the number of inodes to scan, and it returns the
  * total number of remaining possibly-reclaimable inodes.
  */
-static int shrink_icache_memory(int nr, gfp_t gfp_mask)
+static int shrink_icache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		/*
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff593276..036880895bf 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,7 +297,6 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
 	struct page *new_page;
 	unsigned int new_offset;
 	struct buffer_head *bh_in = jh2bh(jh_in);
-	struct jbd2_buffer_trigger_type *triggers;
 	journal_t *journal = transaction->t_journal;
 
 	/*
@@ -328,21 +327,21 @@ repeat:
 		done_copy_out = 1;
 		new_page = virt_to_page(jh_in->b_frozen_data);
 		new_offset = offset_in_page(jh_in->b_frozen_data);
-		triggers = jh_in->b_frozen_triggers;
 	} else {
 		new_page = jh2bh(jh_in)->b_page;
 		new_offset = offset_in_page(jh2bh(jh_in)->b_data);
-		triggers = jh_in->b_triggers;
 	}
 
 	mapped_data = kmap_atomic(new_page, KM_USER0);
 	/*
-	 * Fire any commit trigger.  Do this before checking for escaping,
-	 * as the trigger may modify the magic offset.  If a copy-out
-	 * happens afterwards, it will have the correct data in the buffer.
+	 * Fire data frozen trigger if data already wasn't frozen.  Do this
+	 * before checking for escaping, as the trigger may modify the magic
+	 * offset.  If a copy-out happens afterwards, it will have the correct
+	 * data in the buffer.
 	 */
-	jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
-				   triggers);
+	if (!done_copy_out)
+		jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+					   jh_in->b_triggers);
 
 	/*
 	 * Check for escaping
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e214d68620a..b8e0806681b 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -725,6 +725,9 @@ done:
 		page = jh2bh(jh)->b_page;
 		offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
 		source = kmap_atomic(page, KM_USER0);
+		/* Fire data frozen trigger just before we copy the data */
+		jbd2_buffer_frozen_trigger(jh, source + offset,
+					   jh->b_triggers);
 		memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
 		kunmap_atomic(source, KM_USER0);
 
@@ -963,15 +966,15 @@ void jbd2_journal_set_triggers(struct buffer_head *bh,
 	jh->b_triggers = type;
 }
 
-void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
 				struct jbd2_buffer_trigger_type *triggers)
 {
 	struct buffer_head *bh = jh2bh(jh);
 
-	if (!triggers || !triggers->t_commit)
+	if (!triggers || !triggers->t_frozen)
 		return;
 
-	triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+	triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
 }
 
 void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index a33aab6b5e6..54a92fd02bb 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -234,8 +234,9 @@ static int jffs2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 			if (inode->i_mode != mode) {
 				struct iattr attr;
 
-				attr.ia_valid = ATTR_MODE;
+				attr.ia_valid = ATTR_MODE | ATTR_CTIME;
 				attr.ia_mode = mode;
+				attr.ia_ctime = CURRENT_TIME_SEC;
 				rc = jffs2_do_setattr(inode, &attr);
 				if (rc < 0)
 					return rc;
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 7aa4417e085..166062a6823 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -222,15 +222,18 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(ri->ctime));
 
 	jffs2_free_raw_inode(ri);
-	d_instantiate(dentry, inode);
 
 	D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
 		  inode->i_ino, inode->i_mode, inode->i_nlink,
 		  f->inocache->pino_nlink, inode->i_mapping->nrpages));
+
+	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
 
  fail:
 	make_bad_inode(inode);
+	unlock_new_inode(inode);
 	iput(inode);
 	jffs2_free_raw_inode(ri);
 	return ret;
@@ -360,8 +363,8 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 
 	/* We use f->target field to store the target path. */
@@ -370,8 +373,8 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 		printk(KERN_WARNING "Can't allocate %d bytes of memory\n", targetlen + 1);
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	memcpy(f->target, target, targetlen + 1);
@@ -386,30 +389,24 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -437,8 +434,8 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -453,7 +450,14 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 
@@ -519,8 +523,8 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 	/* No data here. Only a metadata node, which will be
 	   obsoleted by the first data write
@@ -531,30 +535,24 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -582,8 +580,8 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -599,7 +597,14 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
@@ -693,8 +698,8 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 	/* No data here. Only a metadata node, which will be
 	   obsoleted by the first data write
@@ -705,30 +710,24 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -759,8 +758,8 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -775,8 +774,14 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
-
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 8bc2c80ab15..459d39d1ea0 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -465,7 +465,12 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
 	inode->i_blocks = 0;
 	inode->i_size = 0;
 
-	insert_inode_hash(inode);
+	if (insert_inode_locked(inode) < 0) {
+		make_bad_inode(inode);
+		unlock_new_inode(inode);
+		iput(inode);
+		return ERR_PTR(-EINVAL);
+	}
 
 	return inode;
 }
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index a2d58c96f1b..d258e261bdc 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -626,7 +626,7 @@ void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *i
 
 static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
 {
-	/* success of check_xattr_ref_inode() means taht inode (ic) dose not have
+	/* success of check_xattr_ref_inode() means that inode (ic) dose not have
 	 * duplicate name/value pairs. If duplicate name/value pair would be found,
 	 * one will be removed.
 	 */
diff --git a/fs/libfs.c b/fs/libfs.c
index 09e1016eb77..dcaf972cbf1 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -489,7 +489,8 @@ int simple_write_end(struct file *file, struct address_space *mapping,
  * unique inode values later for this filesystem, then you must take care
  * to pass it an appropriate max_reserved value to avoid collisions.
  */
-int simple_fill_super(struct super_block *s, int magic, struct tree_descr *files)
+int simple_fill_super(struct super_block *s, unsigned long magic,
+		      struct tree_descr *files)
 {
 	struct inode *inode;
 	struct dentry *root;
diff --git a/fs/mbcache.c b/fs/mbcache.c
index ec88ff3d04a..e28f21b9534 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -115,7 +115,7 @@ mb_cache_indexes(struct mb_cache *cache)
  * What the mbcache registers as to get shrunk dynamically.
  */
 
-static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
+static int mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
 
 static struct shrinker mb_cache_shrinker = {
 	.shrink = mb_cache_shrink_fn,
@@ -191,13 +191,14 @@ forget:
  * This function is called by the kernel memory management when memory
  * gets low.
  *
+ * @shrink: (ignored)
  * @nr_to_scan: Number of objects to scan
  * @gfp_mask: (ignored)
  *
  * Returns the number of objects which are present in the cache.
  */
 static int
-mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
+mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(free_list);
 	struct list_head *l, *ltmp;
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index 91969589131..1dbf921ca44 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -75,10 +75,6 @@ static struct page * dir_get_page(struct inode *dir, unsigned long n)
 	if (!IS_ERR(page))
 		kmap(page);
 	return page;
-
-fail:
-	dir_put_page(page);
-	return ERR_PTR(-EIO);
 }
 
 static inline void *minix_next_entry(void *de, struct minix_sb_info *sbi)
diff --git a/fs/namei.c b/fs/namei.c
index 868d0cb9d47..42d2d28fb82 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -282,8 +282,7 @@ int inode_permission(struct inode *inode, int mask)
 	if (retval)
 		return retval;
 
-	return security_inode_permission(inode,
-			mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND));
+	return security_inode_permission(inode, mask);
 }
 
 /**
@@ -1484,8 +1483,7 @@ static int handle_truncate(struct path *path)
 	 */
 	error = locks_verify_locked(inode);
 	if (!error)
-		error = security_path_truncate(path, 0,
-				       ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+		error = security_path_truncate(path);
 	if (!error) {
 		error = do_truncate(path->dentry, 0,
 				    ATTR_MTIME|ATTR_CTIME|ATTR_OPEN,
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7ec9b34a59f..d25b5257b7a 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1286,6 +1286,55 @@ static void nfs4_session_set_rwsize(struct nfs_server *server)
 #endif /* CONFIG_NFS_V4_1 */
 }
 
+static int nfs4_server_common_setup(struct nfs_server *server,
+		struct nfs_fh *mntfh)
+{
+	struct nfs_fattr *fattr;
+	int error;
+
+	BUG_ON(!server->nfs_client);
+	BUG_ON(!server->nfs_client->rpc_ops);
+	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
+
+	fattr = nfs_alloc_fattr();
+	if (fattr == NULL)
+		return -ENOMEM;
+
+	/* We must ensure the session is initialised first */
+	error = nfs4_init_session(server);
+	if (error < 0)
+		goto out;
+
+	/* Probe the root fh to retrieve its FSID and filehandle */
+	error = nfs4_get_rootfh(server, mntfh);
+	if (error < 0)
+		goto out;
+
+	dprintk("Server FSID: %llx:%llx\n",
+			(unsigned long long) server->fsid.major,
+			(unsigned long long) server->fsid.minor);
+	dprintk("Mount FH: %d\n", mntfh->size);
+
+	nfs4_session_set_rwsize(server);
+
+	error = nfs_probe_fsinfo(server, mntfh, fattr);
+	if (error < 0)
+		goto out;
+
+	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+		server->namelen = NFS4_MAXNAMLEN;
+
+	spin_lock(&nfs_client_lock);
+	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
+	list_add_tail(&server->master_link, &nfs_volume_list);
+	spin_unlock(&nfs_client_lock);
+
+	server->mount_time = jiffies;
+out:
+	nfs_free_fattr(fattr);
+	return error;
+}
+
 /*
  * Create a version 4 volume record
  */
@@ -1346,7 +1395,6 @@ error:
 struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 				      struct nfs_fh *mntfh)
 {
-	struct nfs_fattr *fattr;
 	struct nfs_server *server;
 	int error;
 
@@ -1356,55 +1404,19 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	/* set up the general RPC client */
 	error = nfs4_init_server(server, data);
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	error = nfs4_init_session(server);
-	if (error < 0)
-		goto error;
-
-	/* Probe the root fh to retrieve its FSID */
-	error = nfs4_get_rootfh(server, mntfh);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	dprintk("Server FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-	dprintk("Mount FH: %d\n", mntfh->size);
-
-	nfs4_session_set_rwsize(server);
-
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
-	if (error < 0)
-		goto error;
-
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
 	dprintk("<-- nfs4_create_server() = %p\n", server);
-	nfs_free_fattr(fattr);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_server() = error %d\n", error);
 	return ERR_PTR(error);
@@ -1418,7 +1430,6 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 {
 	struct nfs_client *parent_client;
 	struct nfs_server *server, *parent_server;
-	struct nfs_fattr *fattr;
 	int error;
 
 	dprintk("--> nfs4_create_referral_server()\n");
@@ -1427,11 +1438,6 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	parent_server = NFS_SB(data->sb);
 	parent_client = parent_server->nfs_client;
 
@@ -1456,40 +1462,14 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	/* Probe the root fh to retrieve its FSID and filehandle */
-	error = nfs4_get_rootfh(server, mntfh);
-	if (error < 0)
-		goto error;
-
-	/* probe the filesystem info for this server filesystem */
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	dprintk("Referral FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
-
-	nfs_free_fattr(fattr);
 	dprintk("<-- nfs_create_referral_server() = %p\n", server);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_referral_server() = error %d\n", error);
 	return ERR_PTR(error);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 782b431ef91..832e9e23932 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1710,7 +1710,7 @@ static void nfs_access_free_list(struct list_head *head)
 	}
 }
 
-int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+int nfs_access_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(head);
 	struct nfs_inode *nfsi;
@@ -1953,7 +1953,7 @@ int nfs_permission(struct inode *inode, int mask)
 	if ((mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		goto out;
 	/* Is this sys_access() ? */
-	if (mask & MAY_ACCESS)
+	if (mask & (MAY_ACCESS | MAY_CHDIR))
 		goto force_lookup;
 
 	switch (inode->i_mode & S_IFMT) {
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 36a5e74f51b..f036153d9f5 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -27,6 +27,7 @@
 #include <linux/pagemap.h>
 #include <linux/aio.h>
 #include <linux/gfp.h>
+#include <linux/swap.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -493,11 +494,19 @@ static void nfs_invalidate_page(struct page *page, unsigned long offset)
  */
 static int nfs_release_page(struct page *page, gfp_t gfp)
 {
+	struct address_space *mapping = page->mapping;
+
 	dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
 
 	/* Only do I/O if gfp is a superset of GFP_KERNEL */
-	if ((gfp & GFP_KERNEL) == GFP_KERNEL)
-		nfs_wb_page(page->mapping->host, page);
+	if (mapping && (gfp & GFP_KERNEL) == GFP_KERNEL) {
+		int how = FLUSH_SYNC;
+
+		/* Don't let kswapd deadlock waiting for OOM RPC calls */
+		if (current_is_kswapd())
+			how = 0;
+		nfs_commit_inode(mapping->host, how);
+	}
 	/* If PagePrivate() is set, then the page is not freeable */
 	if (PagePrivate(page))
 		return 0;
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 7428f7d6273..a70e446e160 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -146,7 +146,7 @@ int nfs4_get_rootfh(struct nfs_server *server, struct nfs_fh *mntfh)
 		goto out;
 	}
 
-	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_MODE)
+	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_TYPE)
 			|| !S_ISDIR(fsinfo.fattr->mode)) {
 		printk(KERN_ERR "nfs4_get_rootfh:"
 		       " getroot encountered non-directory\n");
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index d8bd619e386..e70f44b9b3f 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -205,7 +205,8 @@ extern struct rpc_procinfo nfs4_procedures[];
 void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
 
 /* dir.c */
-extern int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask);
+extern int nfs_access_cache_shrinker(struct shrinker *shrink,
+					int nr_to_scan, gfp_t gfp_mask);
 
 /* inode.c */
 extern struct workqueue_struct *nfsiod_workqueue;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 6bdef28efa3..65c8dae4b26 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -862,8 +862,8 @@ static void encode_attrs(struct xdr_stream *xdr, const struct iattr *iap, const
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
 		*p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
 		*p++ = cpu_to_be32(0);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_sec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_nsec);
 	}
 	else if (iap->ia_valid & ATTR_ATIME) {
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 6bd19d843af..df101d9f546 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -105,7 +105,7 @@ static char nfs_root_name[256] __initdata = "";
 static __be32 servaddr __initdata = 0;
 
 /* Name of directory to mount */
-static char nfs_export_path[NFS_MAXPATHLEN] __initdata = { 0, };
+static char nfs_export_path[NFS_MAXPATHLEN + 1] __initdata = { 0, };
 
 /* NFS-related data */
 static struct nfs_mount_data nfs_data __initdata = { 0, };/* NFS mount info */
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 04214fc5c30..f9df16de4a5 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -570,6 +570,22 @@ static void nfs_show_mountd_options(struct seq_file *m, struct nfs_server *nfss,
 	nfs_show_mountd_netid(m, nfss, showdefaults);
 }
 
+#ifdef CONFIG_NFS_V4
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+	struct nfs_client *clp = nfss->nfs_client;
+
+	seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
+	seq_printf(m, ",minorversion=%u", clp->cl_minorversion);
+}
+#else
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+}
+#endif
+
 /*
  * Describe the mount options in force on this server representation
  */
@@ -631,11 +647,9 @@ static void nfs_show_mount_options(struct seq_file *m, struct nfs_server *nfss,
 
 	if (version != 4)
 		nfs_show_mountd_options(m, nfss, showdefaults);
+	else
+		nfs_show_nfsv4_options(m, nfss, showdefaults);
 
-#ifdef CONFIG_NFS_V4
-	if (clp->rpc_ops->version == 4)
-		seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
-#endif
 	if (nfss->options & NFS_OPTION_FSCACHE)
 		seq_printf(m, ",fsc");
 }
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 91679e2631e..9f81bdd91c5 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -222,7 +222,7 @@ static void nfs_end_page_writeback(struct page *page)
 		clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
 }
 
-static struct nfs_page *nfs_find_and_lock_request(struct page *page)
+static struct nfs_page *nfs_find_and_lock_request(struct page *page, bool nonblock)
 {
 	struct inode *inode = page->mapping->host;
 	struct nfs_page *req;
@@ -241,7 +241,10 @@ static struct nfs_page *nfs_find_and_lock_request(struct page *page)
 		 *	 request as dirty (in which case we don't care).
 		 */
 		spin_unlock(&inode->i_lock);
-		ret = nfs_wait_on_request(req);
+		if (!nonblock)
+			ret = nfs_wait_on_request(req);
+		else
+			ret = -EAGAIN;
 		nfs_release_request(req);
 		if (ret != 0)
 			return ERR_PTR(ret);
@@ -256,12 +259,12 @@ static struct nfs_page *nfs_find_and_lock_request(struct page *page)
  * May return an error if the user signalled nfs_wait_on_request().
  */
 static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
-				struct page *page)
+				struct page *page, bool nonblock)
 {
 	struct nfs_page *req;
 	int ret = 0;
 
-	req = nfs_find_and_lock_request(page);
+	req = nfs_find_and_lock_request(page, nonblock);
 	if (!req)
 		goto out;
 	ret = PTR_ERR(req);
@@ -283,12 +286,20 @@ out:
 static int nfs_do_writepage(struct page *page, struct writeback_control *wbc, struct nfs_pageio_descriptor *pgio)
 {
 	struct inode *inode = page->mapping->host;
+	int ret;
 
 	nfs_inc_stats(inode, NFSIOS_VFSWRITEPAGE);
 	nfs_add_stats(inode, NFSIOS_WRITEPAGES, 1);
 
 	nfs_pageio_cond_complete(pgio, page->index);
-	return nfs_page_async_flush(pgio, page);
+	ret = nfs_page_async_flush(pgio, page,
+			wbc->sync_mode == WB_SYNC_NONE ||
+			wbc->nonblocking != 0);
+	if (ret == -EAGAIN) {
+		redirty_page_for_writepage(wbc, page);
+		ret = 0;
+	}
+	return ret;
 }
 
 /*
@@ -1379,7 +1390,7 @@ static const struct rpc_call_ops nfs_commit_ops = {
 	.rpc_release = nfs_commit_release,
 };
 
-static int nfs_commit_inode(struct inode *inode, int how)
+int nfs_commit_inode(struct inode *inode, int how)
 {
 	LIST_HEAD(head);
 	int may_wait = how & FLUSH_SYNC;
@@ -1443,11 +1454,6 @@ out_mark_dirty:
 	return ret;
 }
 #else
-static int nfs_commit_inode(struct inode *inode, int how)
-{
-	return 0;
-}
-
 static int nfs_commit_unstable_pages(struct inode *inode, struct writeback_control *wbc)
 {
 	return 0;
@@ -1546,7 +1552,7 @@ int nfs_migrate_page(struct address_space *mapping, struct page *newpage,
 
 	nfs_fscache_release_page(page, GFP_KERNEL);
 
-	req = nfs_find_and_lock_request(page);
+	req = nfs_find_and_lock_request(page, false);
 	ret = PTR_ERR(req);
 	if (IS_ERR(req))
 		goto out;
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 12f7109720c..4a273475877 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4122,8 +4122,8 @@ nfs4_state_shutdown(void)
 	nfs4_lock_state();
 	nfs4_release_reclaim();
 	__nfs4_state_shutdown();
-	nfsd4_destroy_callback_queue();
 	nfs4_unlock_state();
+	nfsd4_destroy_callback_queue();
 }
 
 /*
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ebbf3b6b245..3c111120b61 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -443,8 +443,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 	if (size_change)
 		put_write_access(inode);
 	if (!err)
-		if (EX_ISSYNC(fhp->fh_export))
-			write_inode_now(inode, 1);
+		commit_metadata(fhp);
 out:
 	return err;
 
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index af638d59e3b..43c8c5b541f 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -75,8 +75,6 @@ struct nilfs_btree_path {
 
 extern struct kmem_cache *nilfs_btree_path_cache;
 
-int nilfs_btree_path_cache_init(void);
-void nilfs_btree_path_cache_destroy(void);
 int nilfs_btree_init(struct nilfs_bmap *);
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
 				   const __u64 *, const __u64 *, int);
diff --git a/fs/nilfs2/segbuf.h b/fs/nilfs2/segbuf.h
index fdf1c3b6d67..85fbb66455e 100644
--- a/fs/nilfs2/segbuf.h
+++ b/fs/nilfs2/segbuf.h
@@ -127,8 +127,6 @@ struct nilfs_segment_buffer {
 
 extern struct kmem_cache *nilfs_segbuf_cachep;
 
-int __init nilfs_init_segbuf_cache(void);
-void nilfs_destroy_segbuf_cache(void);
 struct nilfs_segment_buffer *nilfs_segbuf_new(struct super_block *);
 void nilfs_segbuf_free(struct nilfs_segment_buffer *);
 void nilfs_segbuf_map(struct nilfs_segment_buffer *, __u64, unsigned long,
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index dca142361cc..01e20dbb217 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -221,8 +221,6 @@ enum {
 extern struct kmem_cache *nilfs_transaction_cachep;
 
 /* segment.c */
-extern int nilfs_init_transaction_cache(void);
-extern void nilfs_destroy_transaction_cache(void);
 extern void nilfs_relax_pressure_in_lock(struct super_block *);
 
 extern int nilfs_construct_segment(struct super_block *);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 03b34b73899..414ef68931c 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -1130,13 +1130,13 @@ static void nilfs_segbuf_init_once(void *obj)
 
 static void nilfs_destroy_cachep(void)
 {
-	 if (nilfs_inode_cachep)
+	if (nilfs_inode_cachep)
 		kmem_cache_destroy(nilfs_inode_cachep);
-	 if (nilfs_transaction_cachep)
+	if (nilfs_transaction_cachep)
 		kmem_cache_destroy(nilfs_transaction_cachep);
-	 if (nilfs_segbuf_cachep)
+	if (nilfs_segbuf_cachep)
 		kmem_cache_destroy(nilfs_segbuf_cachep);
-	 if (nilfs_btree_path_cache)
+	if (nilfs_btree_path_cache)
 		kmem_cache_destroy(nilfs_btree_path_cache);
 }
 
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3623ca20cc1..96337a4fbbd 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -196,15 +196,14 @@ int ocfs2_get_block(struct inode *inode, sector_t iblock,
 			dump_stack();
 			goto bail;
 		}
-
-		past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
-		mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
-		     (unsigned long long)past_eof);
-
-		if (create && (iblock >= past_eof))
-			set_buffer_new(bh_result);
 	}
 
+	past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
+	mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
+	     (unsigned long long)past_eof);
+	if (create && (iblock >= past_eof))
+		set_buffer_new(bh_result);
+
 bail:
 	if (err < 0)
 		err = -EIO;
@@ -459,36 +458,6 @@ int walk_page_buffers(	handle_t *handle,
 	return ret;
 }
 
-handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
-							 struct page *page,
-							 unsigned from,
-							 unsigned to)
-{
-	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-	handle_t *handle;
-	int ret = 0;
-
-	handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
-	if (IS_ERR(handle)) {
-		ret = -ENOMEM;
-		mlog_errno(ret);
-		goto out;
-	}
-
-	if (ocfs2_should_order_data(inode)) {
-		ret = ocfs2_jbd2_file_inode(handle, inode);
-		if (ret < 0)
-			mlog_errno(ret);
-	}
-out:
-	if (ret) {
-		if (!IS_ERR(handle))
-			ocfs2_commit_trans(osb, handle);
-		handle = ERR_PTR(ret);
-	}
-	return handle;
-}
-
 static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
 {
 	sector_t status;
@@ -609,7 +578,9 @@ bail:
 static void ocfs2_dio_end_io(struct kiocb *iocb,
 			     loff_t offset,
 			     ssize_t bytes,
-			     void *private)
+			     void *private,
+			     int ret,
+			     bool is_async)
 {
 	struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
 	int level;
@@ -623,6 +594,9 @@ static void ocfs2_dio_end_io(struct kiocb *iocb,
 	if (!level)
 		up_read(&inode->i_alloc_sem);
 	ocfs2_rw_unlock(inode, level);
+
+	if (is_async)
+		aio_complete(iocb, ret, 0);
 }
 
 /*
@@ -1131,23 +1105,37 @@ out:
  */
 static int ocfs2_grab_pages_for_write(struct address_space *mapping,
 				      struct ocfs2_write_ctxt *wc,
-				      u32 cpos, loff_t user_pos, int new,
+				      u32 cpos, loff_t user_pos,
+				      unsigned user_len, int new,
 				      struct page *mmap_page)
 {
 	int ret = 0, i;
-	unsigned long start, target_index, index;
+	unsigned long start, target_index, end_index, index;
 	struct inode *inode = mapping->host;
+	loff_t last_byte;
 
 	target_index = user_pos >> PAGE_CACHE_SHIFT;
 
 	/*
 	 * Figure out how many pages we'll be manipulating here. For
 	 * non allocating write, we just change the one
-	 * page. Otherwise, we'll need a whole clusters worth.
+	 * page. Otherwise, we'll need a whole clusters worth.  If we're
+	 * writing past i_size, we only need enough pages to cover the
+	 * last page of the write.
 	 */
 	if (new) {
 		wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
 		start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
+		/*
+		 * We need the index *past* the last page we could possibly
+		 * touch.  This is the page past the end of the write or
+		 * i_size, whichever is greater.
+		 */
+		last_byte = max(user_pos + user_len, i_size_read(inode));
+		BUG_ON(last_byte < 1);
+		end_index = ((last_byte - 1) >> PAGE_CACHE_SHIFT) + 1;
+		if ((start + wc->w_num_pages) > end_index)
+			wc->w_num_pages = end_index - start;
 	} else {
 		wc->w_num_pages = 1;
 		start = target_index;
@@ -1620,21 +1608,20 @@ out:
  * write path can treat it as an non-allocating write, which has no
  * special case code for sparse/nonsparse files.
  */
-static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
-					unsigned len,
+static int ocfs2_expand_nonsparse_inode(struct inode *inode,
+					struct buffer_head *di_bh,
+					loff_t pos, unsigned len,
 					struct ocfs2_write_ctxt *wc)
 {
 	int ret;
-	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	loff_t newsize = pos + len;
 
-	if (ocfs2_sparse_alloc(osb))
-		return 0;
+	BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
 
 	if (newsize <= i_size_read(inode))
 		return 0;
 
-	ret = ocfs2_extend_no_holes(inode, newsize, pos);
+	ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
 	if (ret)
 		mlog_errno(ret);
 
@@ -1644,6 +1631,18 @@ static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
 	return ret;
 }
 
+static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
+			   loff_t pos)
+{
+	int ret = 0;
+
+	BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
+	if (pos > i_size_read(inode))
+		ret = ocfs2_zero_extend(inode, di_bh, pos);
+
+	return ret;
+}
+
 int ocfs2_write_begin_nolock(struct address_space *mapping,
 			     loff_t pos, unsigned len, unsigned flags,
 			     struct page **pagep, void **fsdata,
@@ -1679,7 +1678,11 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
 		}
 	}
 
-	ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
+	if (ocfs2_sparse_alloc(osb))
+		ret = ocfs2_zero_tail(inode, di_bh, pos);
+	else
+		ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
+						   wc);
 	if (ret) {
 		mlog_errno(ret);
 		goto out;
@@ -1789,7 +1792,7 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
 	 * that we can zero and flush if we error after adding the
 	 * extent.
 	 */
-	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
+	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
 					 cluster_of_pages, mmap_page);
 	if (ret) {
 		mlog_errno(ret);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6b5a492e174..153abb5abef 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1671,7 +1671,7 @@ struct dlm_ctxt * dlm_register_domain(const char *domain,
 	struct dlm_ctxt *dlm = NULL;
 	struct dlm_ctxt *new_ctxt = NULL;
 
-	if (strlen(domain) > O2NM_MAX_NAME_LEN) {
+	if (strlen(domain) >= O2NM_MAX_NAME_LEN) {
 		ret = -ENAMETOOLONG;
 		mlog(ML_ERROR, "domain name length too long\n");
 		goto leave;
@@ -1709,6 +1709,7 @@ retry:
 		}
 
 		if (dlm_protocol_compare(&dlm->fs_locking_proto, fs_proto)) {
+			spin_unlock(&dlm_domain_lock);
 			mlog(ML_ERROR,
 			     "Requested locking protocol version is not "
 			     "compatible with already registered domain "
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 4a7506a4e31..94b97fc6a88 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2808,14 +2808,8 @@ again:
 		mlog(0, "trying again...\n");
 		goto again;
 	}
-	/* now that we are sure the MIGRATING state is there, drop
-	 * the unneded state which blocked threads trying to DIRTY */
-	spin_lock(&res->spinlock);
-	BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
-	BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
-	res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
-	spin_unlock(&res->spinlock);
 
+	ret = 0;
 	/* did the target go down or die? */
 	spin_lock(&dlm->spinlock);
 	if (!test_bit(target, dlm->domain_map)) {
@@ -2826,9 +2820,21 @@ again:
 	spin_unlock(&dlm->spinlock);
 
 	/*
+	 * if target is down, we need to clear DLM_LOCK_RES_BLOCK_DIRTY for
+	 * another try; otherwise, we are sure the MIGRATING state is there,
+	 * drop the unneded state which blocked threads trying to DIRTY
+	 */
+	spin_lock(&res->spinlock);
+	BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
+	res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
+	if (!ret)
+		BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
+	spin_unlock(&res->spinlock);
+
+	/*
 	 * at this point:
 	 *
-	 *   o the DLM_LOCK_RES_MIGRATING flag is set
+	 *   o the DLM_LOCK_RES_MIGRATING flag is set if target not down
 	 *   o there are no pending asts on this lockres
 	 *   o all processes trying to reserve an ast on this
 	 *     lockres must wait for the MIGRATING flag to clear
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index f8b75ce4be7..9dfaac73b36 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -463,7 +463,7 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm)
 	if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
 		int bit;
 
-		bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES+1, 0);
+		bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES, 0);
 		if (bit >= O2NM_MAX_NODES || bit < 0)
 			dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 		else
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 6a13ea64c44..2b10b36d157 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -724,28 +724,55 @@ leave:
 	return status;
 }
 
+/*
+ * While a write will already be ordering the data, a truncate will not.
+ * Thus, we need to explicitly order the zeroed pages.
+ */
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+{
+	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+	handle_t *handle = NULL;
+	int ret = 0;
+
+	if (!ocfs2_should_order_data(inode))
+		goto out;
+
+	handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+	if (IS_ERR(handle)) {
+		ret = -ENOMEM;
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_jbd2_file_inode(handle, inode);
+	if (ret < 0)
+		mlog_errno(ret);
+
+out:
+	if (ret) {
+		if (!IS_ERR(handle))
+			ocfs2_commit_trans(osb, handle);
+		handle = ERR_PTR(ret);
+	}
+	return handle;
+}
+
 /* Some parts of this taken from generic_cont_expand, which turned out
  * to be too fragile to do exactly what we need without us having to
  * worry about recursive locking in ->write_begin() and ->write_end(). */
-static int ocfs2_write_zero_page(struct inode *inode,
-				 u64 size)
+static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
+				 u64 abs_to)
 {
 	struct address_space *mapping = inode->i_mapping;
 	struct page *page;
-	unsigned long index;
-	unsigned int offset;
+	unsigned long index = abs_from >> PAGE_CACHE_SHIFT;
 	handle_t *handle = NULL;
-	int ret;
+	int ret = 0;
+	unsigned zero_from, zero_to, block_start, block_end;
 
-	offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
-	/* ugh.  in prepare/commit_write, if from==to==start of block, we
-	** skip the prepare.  make sure we never send an offset for the start
-	** of a block
-	*/
-	if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
-		offset++;
-	}
-	index = size >> PAGE_CACHE_SHIFT;
+	BUG_ON(abs_from >= abs_to);
+	BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
+	BUG_ON(abs_from & (inode->i_blkbits - 1));
 
 	page = grab_cache_page(mapping, index);
 	if (!page) {
@@ -754,31 +781,56 @@ static int ocfs2_write_zero_page(struct inode *inode,
 		goto out;
 	}
 
-	ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out_unlock;
-	}
+	/* Get the offsets within the page that we want to zero */
+	zero_from = abs_from & (PAGE_CACHE_SIZE - 1);
+	zero_to = abs_to & (PAGE_CACHE_SIZE - 1);
+	if (!zero_to)
+		zero_to = PAGE_CACHE_SIZE;
 
-	if (ocfs2_should_order_data(inode)) {
-		handle = ocfs2_start_walk_page_trans(inode, page, offset,
-						     offset);
-		if (IS_ERR(handle)) {
-			ret = PTR_ERR(handle);
-			handle = NULL;
+	mlog(0,
+	     "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n",
+	     (unsigned long long)abs_from, (unsigned long long)abs_to,
+	     index, zero_from, zero_to);
+
+	/* We know that zero_from is block aligned */
+	for (block_start = zero_from; block_start < zero_to;
+	     block_start = block_end) {
+		block_end = block_start + (1 << inode->i_blkbits);
+
+		/*
+		 * block_start is block-aligned.  Bump it by one to
+		 * force ocfs2_{prepare,commit}_write() to zero the
+		 * whole block.
+		 */
+		ret = ocfs2_prepare_write_nolock(inode, page,
+						 block_start + 1,
+						 block_start + 1);
+		if (ret < 0) {
+			mlog_errno(ret);
 			goto out_unlock;
 		}
-	}
 
-	/* must not update i_size! */
-	ret = block_commit_write(page, offset, offset);
-	if (ret < 0)
-		mlog_errno(ret);
-	else
-		ret = 0;
+		if (!handle) {
+			handle = ocfs2_zero_start_ordered_transaction(inode);
+			if (IS_ERR(handle)) {
+				ret = PTR_ERR(handle);
+				handle = NULL;
+				break;
+			}
+		}
+
+		/* must not update i_size! */
+		ret = block_commit_write(page, block_start + 1,
+					 block_start + 1);
+		if (ret < 0)
+			mlog_errno(ret);
+		else
+			ret = 0;
+	}
 
 	if (handle)
 		ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+
 out_unlock:
 	unlock_page(page);
 	page_cache_release(page);
@@ -786,22 +838,114 @@ out:
 	return ret;
 }
 
-static int ocfs2_zero_extend(struct inode *inode,
-			     u64 zero_to_size)
+/*
+ * Find the next range to zero.  We do this in terms of bytes because
+ * that's what ocfs2_zero_extend() wants, and it is dealing with the
+ * pagecache.  We may return multiple extents.
+ *
+ * zero_start and zero_end are ocfs2_zero_extend()s current idea of what
+ * needs to be zeroed.  range_start and range_end return the next zeroing
+ * range.  A subsequent call should pass the previous range_end as its
+ * zero_start.  If range_end is 0, there's nothing to do.
+ *
+ * Unwritten extents are skipped over.  Refcounted extents are CoWd.
+ */
+static int ocfs2_zero_extend_get_range(struct inode *inode,
+				       struct buffer_head *di_bh,
+				       u64 zero_start, u64 zero_end,
+				       u64 *range_start, u64 *range_end)
 {
-	int ret = 0;
-	u64 start_off;
-	struct super_block *sb = inode->i_sb;
+	int rc = 0, needs_cow = 0;
+	u32 p_cpos, zero_clusters = 0;
+	u32 zero_cpos =
+		zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+	u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end);
+	unsigned int num_clusters = 0;
+	unsigned int ext_flags = 0;
 
-	start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
-	while (start_off < zero_to_size) {
-		ret = ocfs2_write_zero_page(inode, start_off);
-		if (ret < 0) {
-			mlog_errno(ret);
+	while (zero_cpos < last_cpos) {
+		rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos,
+					&num_clusters, &ext_flags);
+		if (rc) {
+			mlog_errno(rc);
+			goto out;
+		}
+
+		if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
+			zero_clusters = num_clusters;
+			if (ext_flags & OCFS2_EXT_REFCOUNTED)
+				needs_cow = 1;
+			break;
+		}
+
+		zero_cpos += num_clusters;
+	}
+	if (!zero_clusters) {
+		*range_end = 0;
+		goto out;
+	}
+
+	while ((zero_cpos + zero_clusters) < last_cpos) {
+		rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters,
+					&p_cpos, &num_clusters,
+					&ext_flags);
+		if (rc) {
+			mlog_errno(rc);
 			goto out;
 		}
 
-		start_off += sb->s_blocksize;
+		if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN))
+			break;
+		if (ext_flags & OCFS2_EXT_REFCOUNTED)
+			needs_cow = 1;
+		zero_clusters += num_clusters;
+	}
+	if ((zero_cpos + zero_clusters) > last_cpos)
+		zero_clusters = last_cpos - zero_cpos;
+
+	if (needs_cow) {
+		rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters,
+					UINT_MAX);
+		if (rc) {
+			mlog_errno(rc);
+			goto out;
+		}
+	}
+
+	*range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos);
+	*range_end = ocfs2_clusters_to_bytes(inode->i_sb,
+					     zero_cpos + zero_clusters);
+
+out:
+	return rc;
+}
+
+/*
+ * Zero one range returned from ocfs2_zero_extend_get_range().  The caller
+ * has made sure that the entire range needs zeroing.
+ */
+static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
+				   u64 range_end)
+{
+	int rc = 0;
+	u64 next_pos;
+	u64 zero_pos = range_start;
+
+	mlog(0, "range_start = %llu, range_end = %llu\n",
+	     (unsigned long long)range_start,
+	     (unsigned long long)range_end);
+	BUG_ON(range_start >= range_end);
+
+	while (zero_pos < range_end) {
+		next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
+		if (next_pos > range_end)
+			next_pos = range_end;
+		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+		if (rc < 0) {
+			mlog_errno(rc);
+			break;
+		}
+		zero_pos = next_pos;
 
 		/*
 		 * Very large extends have the potential to lock up
@@ -810,16 +954,63 @@ static int ocfs2_zero_extend(struct inode *inode,
 		cond_resched();
 	}
 
-out:
+	return rc;
+}
+
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+		      loff_t zero_to_size)
+{
+	int ret = 0;
+	u64 zero_start, range_start = 0, range_end = 0;
+	struct super_block *sb = inode->i_sb;
+
+	zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
+	mlog(0, "zero_start %llu for i_size %llu\n",
+	     (unsigned long long)zero_start,
+	     (unsigned long long)i_size_read(inode));
+	while (zero_start < zero_to_size) {
+		ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start,
+						  zero_to_size,
+						  &range_start,
+						  &range_end);
+		if (ret) {
+			mlog_errno(ret);
+			break;
+		}
+		if (!range_end)
+			break;
+		/* Trim the ends */
+		if (range_start < zero_start)
+			range_start = zero_start;
+		if (range_end > zero_to_size)
+			range_end = zero_to_size;
+
+		ret = ocfs2_zero_extend_range(inode, range_start,
+					      range_end);
+		if (ret) {
+			mlog_errno(ret);
+			break;
+		}
+		zero_start = range_end;
+	}
+
 	return ret;
 }
 
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+			  u64 new_i_size, u64 zero_to)
 {
 	int ret;
 	u32 clusters_to_add;
 	struct ocfs2_inode_info *oi = OCFS2_I(inode);
 
+	/*
+	 * Only quota files call this without a bh, and they can't be
+	 * refcounted.
+	 */
+	BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL));
+	BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE));
+
 	clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
 	if (clusters_to_add < oi->ip_clusters)
 		clusters_to_add = 0;
@@ -840,7 +1031,7 @@ int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
 	 * still need to zero the area between the old i_size and the
 	 * new i_size.
 	 */
-	ret = ocfs2_zero_extend(inode, zero_to);
+	ret = ocfs2_zero_extend(inode, di_bh, zero_to);
 	if (ret < 0)
 		mlog_errno(ret);
 
@@ -862,27 +1053,15 @@ static int ocfs2_extend_file(struct inode *inode,
 		goto out;
 
 	if (i_size_read(inode) == new_i_size)
-  		goto out;
+		goto out;
 	BUG_ON(new_i_size < i_size_read(inode));
 
 	/*
-	 * Fall through for converting inline data, even if the fs
-	 * supports sparse files.
-	 *
-	 * The check for inline data here is legal - nobody can add
-	 * the feature since we have i_mutex. We must check it again
-	 * after acquiring ip_alloc_sem though, as paths like mmap
-	 * might have raced us to converting the inode to extents.
-	 */
-	if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
-	    && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
-		goto out_update_size;
-
-	/*
 	 * The alloc sem blocks people in read/write from reading our
 	 * allocation until we're done changing it. We depend on
 	 * i_mutex to block other extend/truncate calls while we're
-	 * here.
+	 * here.  We even have to hold it for sparse files because there
+	 * might be some tail zeroing.
 	 */
 	down_write(&oi->ip_alloc_sem);
 
@@ -899,14 +1078,16 @@ static int ocfs2_extend_file(struct inode *inode,
 		ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
 		if (ret) {
 			up_write(&oi->ip_alloc_sem);
-
 			mlog_errno(ret);
 			goto out;
 		}
 	}
 
-	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
-		ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
+	if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+		ret = ocfs2_zero_extend(inode, di_bh, new_i_size);
+	else
+		ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size,
+					    new_i_size);
 
 	up_write(&oi->ip_alloc_sem);
 
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index d66cf4f7c70..97bf761c9e7 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -54,8 +54,10 @@ int ocfs2_add_inode_data(struct ocfs2_super *osb,
 int ocfs2_simple_size_update(struct inode *inode,
 			     struct buffer_head *di_bh,
 			     u64 new_i_size);
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size,
-			  u64 zero_to);
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+			  u64 new_i_size, u64 zero_to);
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+		      loff_t zero_to);
 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
 int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 47878cf1641..625de9d7088 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -472,7 +472,7 @@ static inline struct ocfs2_triggers *to_ocfs2_trigger(struct jbd2_buffer_trigger
 	return container_of(triggers, struct ocfs2_triggers, ot_triggers);
 }
 
-static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -491,7 +491,7 @@ static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
  * Quota blocks have their own trigger because the struct ocfs2_block_check
  * offset depends on the blocksize.
  */
-static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_dq_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -511,7 +511,7 @@ static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
  * Directory blocks also have their own trigger because the
  * struct ocfs2_block_check offset depends on the blocksize.
  */
-static void ocfs2_db_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_db_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -544,7 +544,7 @@ static void ocfs2_abort_trigger(struct jbd2_buffer_trigger_type *triggers,
 
 static struct ocfs2_triggers di_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dinode, i_check),
@@ -552,7 +552,7 @@ static struct ocfs2_triggers di_triggers = {
 
 static struct ocfs2_triggers eb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_extent_block, h_check),
@@ -560,7 +560,7 @@ static struct ocfs2_triggers eb_triggers = {
 
 static struct ocfs2_triggers rb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_refcount_block, rf_check),
@@ -568,7 +568,7 @@ static struct ocfs2_triggers rb_triggers = {
 
 static struct ocfs2_triggers gd_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_group_desc, bg_check),
@@ -576,14 +576,14 @@ static struct ocfs2_triggers gd_triggers = {
 
 static struct ocfs2_triggers db_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_db_commit_trigger,
+		.t_frozen = ocfs2_db_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 };
 
 static struct ocfs2_triggers xb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_xattr_block, xb_check),
@@ -591,14 +591,14 @@ static struct ocfs2_triggers xb_triggers = {
 
 static struct ocfs2_triggers dq_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_dq_commit_trigger,
+		.t_frozen = ocfs2_dq_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 };
 
 static struct ocfs2_triggers dr_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dx_root_block, dr_check),
@@ -606,7 +606,7 @@ static struct ocfs2_triggers dr_triggers = {
 
 static struct ocfs2_triggers dl_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dx_leaf, dl_check),
@@ -1936,7 +1936,7 @@ void ocfs2_orphan_scan_work(struct work_struct *work)
 	mutex_lock(&os->os_lock);
 	ocfs2_queue_orphan_scan(osb);
 	if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
-		schedule_delayed_work(&os->os_orphan_scan_work,
+		queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
 				      ocfs2_orphan_scan_timeout());
 	mutex_unlock(&os->os_lock);
 }
@@ -1976,8 +1976,8 @@ void ocfs2_orphan_scan_start(struct ocfs2_super *osb)
 		atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
 	else {
 		atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
-		schedule_delayed_work(&os->os_orphan_scan_work,
-				      ocfs2_orphan_scan_timeout());
+		queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
+				   ocfs2_orphan_scan_timeout());
 	}
 }
 
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 3d7419682dc..ec6adbf8f55 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -118,6 +118,7 @@ unsigned int ocfs2_la_default_mb(struct ocfs2_super *osb)
 {
 	unsigned int la_mb;
 	unsigned int gd_mb;
+	unsigned int la_max_mb;
 	unsigned int megs_per_slot;
 	struct super_block *sb = osb->sb;
 
@@ -182,6 +183,12 @@ unsigned int ocfs2_la_default_mb(struct ocfs2_super *osb)
 	if (megs_per_slot < la_mb)
 		la_mb = megs_per_slot;
 
+	/* We can't store more bits than we can in a block. */
+	la_max_mb = ocfs2_clusters_to_megabytes(osb->sb,
+						ocfs2_local_alloc_size(sb) * 8);
+	if (la_mb > la_max_mb)
+		la_mb = la_max_mb;
+
 	return la_mb;
 }
 
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 2bb35fe0051..4607923eb24 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -775,7 +775,7 @@ static int ocfs2_acquire_dquot(struct dquot *dquot)
 		 * locking allocators ranks above a transaction start
 		 */
 		WARN_ON(journal_current_handle());
-		status = ocfs2_extend_no_holes(gqinode,
+		status = ocfs2_extend_no_holes(gqinode, NULL,
 			gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
 			gqinode->i_size);
 		if (status < 0)
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 8bd70d4d184..dc78764ccc4 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -971,7 +971,7 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
 	u64 p_blkno;
 
 	/* We are protected by dqio_sem so no locking needed */
-	status = ocfs2_extend_no_holes(lqinode,
+	status = ocfs2_extend_no_holes(lqinode, NULL,
 				       lqinode->i_size + 2 * sb->s_blocksize,
 				       lqinode->i_size);
 	if (status < 0) {
@@ -1114,7 +1114,7 @@ static struct ocfs2_quota_chunk *ocfs2_extend_local_quota_file(
 		return ocfs2_local_quota_add_chunk(sb, type, offset);
 
 	/* We are protected by dqio_sem so no locking needed */
-	status = ocfs2_extend_no_holes(lqinode,
+	status = ocfs2_extend_no_holes(lqinode, NULL,
 				       lqinode->i_size + sb->s_blocksize,
 				       lqinode->i_size);
 	if (status < 0) {
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 4793f36f651..3ac5aa733e9 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2931,6 +2931,12 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle,
 
 	offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits;
 	end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits);
+	/*
+	 * We only duplicate pages until we reach the page contains i_size - 1.
+	 * So trim 'end' to i_size.
+	 */
+	if (end > i_size_read(context->inode))
+		end = i_size_read(context->inode);
 
 	while (offset < end) {
 		page_index = offset >> PAGE_CACHE_SHIFT;
@@ -4166,6 +4172,12 @@ static int __ocfs2_reflink(struct dentry *old_dentry,
 	struct inode *inode = old_dentry->d_inode;
 	struct buffer_head *new_bh = NULL;
 
+	if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) {
+		ret = -EINVAL;
+		mlog_errno(ret);
+		goto out;
+	}
+
 	ret = filemap_fdatawrite(inode->i_mapping);
 	if (ret) {
 		mlog_errno(ret);
diff --git a/fs/ocfs2/reservations.c b/fs/ocfs2/reservations.c
index 40650021fc2..d8b6e4259b8 100644
--- a/fs/ocfs2/reservations.c
+++ b/fs/ocfs2/reservations.c
@@ -26,7 +26,6 @@
 
 #include <linux/fs.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/bitops.h>
 #include <linux/list.h>
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f4c2a9eb8c4..a8e6a95a353 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -741,7 +741,7 @@ static int ocfs2_block_group_alloc(struct ocfs2_super *osb,
 		     le16_to_cpu(bg->bg_free_bits_count));
 	le32_add_cpu(&cl->cl_recs[alloc_rec].c_total,
 		     le16_to_cpu(bg->bg_bits));
-	cl->cl_recs[alloc_rec].c_blkno  = cpu_to_le64(bg->bg_blkno);
+	cl->cl_recs[alloc_rec].c_blkno = bg->bg_blkno;
 	if (le16_to_cpu(cl->cl_next_free_rec) < le16_to_cpu(cl->cl_count))
 		le16_add_cpu(&cl->cl_next_free_rec, 1);
 
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e97b34842cf..d03469f6180 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -709,7 +709,7 @@ static int ocfs2_xattr_extend_allocation(struct inode *inode,
 					 struct ocfs2_xattr_value_buf *vb,
 					 struct ocfs2_xattr_set_ctxt *ctxt)
 {
-	int status = 0;
+	int status = 0, credits;
 	handle_t *handle = ctxt->handle;
 	enum ocfs2_alloc_restarted why;
 	u32 prev_clusters, logical_start = le32_to_cpu(vb->vb_xv->xr_clusters);
@@ -719,38 +719,54 @@ static int ocfs2_xattr_extend_allocation(struct inode *inode,
 
 	ocfs2_init_xattr_value_extent_tree(&et, INODE_CACHE(inode), vb);
 
-	status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
-			      OCFS2_JOURNAL_ACCESS_WRITE);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
+	while (clusters_to_add) {
+		status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
+				       OCFS2_JOURNAL_ACCESS_WRITE);
+		if (status < 0) {
+			mlog_errno(status);
+			break;
+		}
 
-	prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
-	status = ocfs2_add_clusters_in_btree(handle,
-					     &et,
-					     &logical_start,
-					     clusters_to_add,
-					     0,
-					     ctxt->data_ac,
-					     ctxt->meta_ac,
-					     &why);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
+		prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
+		status = ocfs2_add_clusters_in_btree(handle,
+						     &et,
+						     &logical_start,
+						     clusters_to_add,
+						     0,
+						     ctxt->data_ac,
+						     ctxt->meta_ac,
+						     &why);
+		if ((status < 0) && (status != -EAGAIN)) {
+			if (status != -ENOSPC)
+				mlog_errno(status);
+			break;
+		}
 
-	ocfs2_journal_dirty(handle, vb->vb_bh);
+		ocfs2_journal_dirty(handle, vb->vb_bh);
 
-	clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) - prev_clusters;
+		clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) -
+					 prev_clusters;
 
-	/*
-	 * We should have already allocated enough space before the transaction,
-	 * so no need to restart.
-	 */
-	BUG_ON(why != RESTART_NONE || clusters_to_add);
-
-leave:
+		if (why != RESTART_NONE && clusters_to_add) {
+			/*
+			 * We can only fail in case the alloc file doesn't give
+			 * up enough clusters.
+			 */
+			BUG_ON(why == RESTART_META);
+
+			mlog(0, "restarting xattr value extension for %u"
+			     " clusters,.\n", clusters_to_add);
+			credits = ocfs2_calc_extend_credits(inode->i_sb,
+							    &vb->vb_xv->xr_list,
+							    clusters_to_add);
+			status = ocfs2_extend_trans(handle, credits);
+			if (status < 0) {
+				status = -ENOMEM;
+				mlog_errno(status);
+				break;
+			}
+		}
+	}
 
 	return status;
 }
@@ -6788,16 +6804,15 @@ out:
 	return ret;
 }
 
-static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+static int ocfs2_reflink_xattr_bucket(handle_t *handle,
 				u64 blkno, u64 new_blkno, u32 clusters,
+				u32 *cpos, int num_buckets,
 				struct ocfs2_alloc_context *meta_ac,
 				struct ocfs2_alloc_context *data_ac,
 				struct ocfs2_reflink_xattr_tree_args *args)
 {
 	int i, j, ret = 0;
 	struct super_block *sb = args->reflink->old_inode->i_sb;
-	u32 bpc = ocfs2_xattr_buckets_per_cluster(OCFS2_SB(sb));
-	u32 num_buckets = clusters * bpc;
 	int bpb = args->old_bucket->bu_blocks;
 	struct ocfs2_xattr_value_buf vb = {
 		.vb_access = ocfs2_journal_access,
@@ -6816,14 +6831,6 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
 			break;
 		}
 
-		/*
-		 * The real bucket num in this series of blocks is stored
-		 * in the 1st bucket.
-		 */
-		if (i == 0)
-			num_buckets = le16_to_cpu(
-				bucket_xh(args->old_bucket)->xh_num_buckets);
-
 		ret = ocfs2_xattr_bucket_journal_access(handle,
 						args->new_bucket,
 						OCFS2_JOURNAL_ACCESS_CREATE);
@@ -6837,6 +6844,18 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
 			       bucket_block(args->old_bucket, j),
 			       sb->s_blocksize);
 
+		/*
+		 * Record the start cpos so that we can use it to initialize
+		 * our xattr tree we also set the xh_num_bucket for the new
+		 * bucket.
+		 */
+		if (i == 0) {
+			*cpos = le32_to_cpu(bucket_xh(args->new_bucket)->
+					    xh_entries[0].xe_name_hash);
+			bucket_xh(args->new_bucket)->xh_num_buckets =
+				cpu_to_le16(num_buckets);
+		}
+
 		ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
 
 		ret = ocfs2_reflink_xattr_header(handle, args->reflink,
@@ -6866,6 +6885,7 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
 		}
 
 		ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
+
 		ocfs2_xattr_bucket_relse(args->old_bucket);
 		ocfs2_xattr_bucket_relse(args->new_bucket);
 	}
@@ -6874,6 +6894,75 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
 	ocfs2_xattr_bucket_relse(args->new_bucket);
 	return ret;
 }
+
+static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+				struct inode *inode,
+				struct ocfs2_reflink_xattr_tree_args *args,
+				struct ocfs2_extent_tree *et,
+				struct ocfs2_alloc_context *meta_ac,
+				struct ocfs2_alloc_context *data_ac,
+				u64 blkno, u32 cpos, u32 len)
+{
+	int ret, first_inserted = 0;
+	u32 p_cluster, num_clusters, reflink_cpos = 0;
+	u64 new_blkno;
+	unsigned int num_buckets, reflink_buckets;
+	unsigned int bpc =
+		ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb));
+
+	ret = ocfs2_read_xattr_bucket(args->old_bucket, blkno);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+	num_buckets = le16_to_cpu(bucket_xh(args->old_bucket)->xh_num_buckets);
+	ocfs2_xattr_bucket_relse(args->old_bucket);
+
+	while (len && num_buckets) {
+		ret = ocfs2_claim_clusters(handle, data_ac,
+					   1, &p_cluster, &num_clusters);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
+		new_blkno = ocfs2_clusters_to_blocks(inode->i_sb, p_cluster);
+		reflink_buckets = min(num_buckets, bpc * num_clusters);
+
+		ret = ocfs2_reflink_xattr_bucket(handle, blkno,
+						 new_blkno, num_clusters,
+						 &reflink_cpos, reflink_buckets,
+						 meta_ac, data_ac, args);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
+		/*
+		 * For the 1st allocated cluster, we make it use the same cpos
+		 * so that the xattr tree looks the same as the original one
+		 * in the most case.
+		 */
+		if (!first_inserted) {
+			reflink_cpos = cpos;
+			first_inserted = 1;
+		}
+		ret = ocfs2_insert_extent(handle, et, reflink_cpos, new_blkno,
+					  num_clusters, 0, meta_ac);
+		if (ret)
+			mlog_errno(ret);
+
+		mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
+		     (unsigned long long)new_blkno, num_clusters, reflink_cpos);
+
+		len -= num_clusters;
+		blkno += ocfs2_clusters_to_blocks(inode->i_sb, num_clusters);
+		num_buckets -= reflink_buckets;
+	}
+out:
+	return ret;
+}
+
 /*
  * Create the same xattr extent record in the new inode's xattr tree.
  */
@@ -6885,8 +6974,6 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
 				   void *para)
 {
 	int ret, credits = 0;
-	u32 p_cluster, num_clusters;
-	u64 new_blkno;
 	handle_t *handle;
 	struct ocfs2_reflink_xattr_tree_args *args =
 			(struct ocfs2_reflink_xattr_tree_args *)para;
@@ -6895,6 +6982,9 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
 	struct ocfs2_alloc_context *data_ac = NULL;
 	struct ocfs2_extent_tree et;
 
+	mlog(0, "reflink xattr buckets %llu len %u\n",
+	     (unsigned long long)blkno, len);
+
 	ocfs2_init_xattr_tree_extent_tree(&et,
 					  INODE_CACHE(args->reflink->new_inode),
 					  args->new_blk_bh);
@@ -6914,32 +7004,12 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
 		goto out;
 	}
 
-	ret = ocfs2_claim_clusters(handle, data_ac,
-				   len, &p_cluster, &num_clusters);
-	if (ret) {
-		mlog_errno(ret);
-		goto out_commit;
-	}
-
-	new_blkno = ocfs2_clusters_to_blocks(osb->sb, p_cluster);
-
-	mlog(0, "reflink xattr buckets %llu to %llu, len %u\n",
-	     (unsigned long long)blkno, (unsigned long long)new_blkno, len);
-	ret = ocfs2_reflink_xattr_buckets(handle, blkno, new_blkno, len,
-					  meta_ac, data_ac, args);
-	if (ret) {
-		mlog_errno(ret);
-		goto out_commit;
-	}
-
-	mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
-	     (unsigned long long)new_blkno, len, cpos);
-	ret = ocfs2_insert_extent(handle, &et, cpos, new_blkno,
-				  len, 0, meta_ac);
+	ret = ocfs2_reflink_xattr_buckets(handle, inode, args, &et,
+					  meta_ac, data_ac,
+					  blkno, cpos, len);
 	if (ret)
 		mlog_errno(ret);
 
-out_commit:
 	ocfs2_commit_trans(osb, handle);
 
 out:
diff --git a/fs/open.c b/fs/open.c
index 5463266db9e..0d1fa3dc0ef 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -110,7 +110,7 @@ static long do_sys_truncate(const char __user *pathname, loff_t length)
 
 	error = locks_verify_truncate(inode, NULL, length);
 	if (!error)
-		error = security_path_truncate(&path, length, 0);
+		error = security_path_truncate(&path);
 	if (!error)
 		error = do_truncate(path.dentry, length, 0, NULL);
 
@@ -165,8 +165,7 @@ static long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 
 	error = locks_verify_truncate(inode, file, length);
 	if (!error)
-		error = security_path_truncate(&file->f_path, length,
-					       ATTR_MTIME|ATTR_CTIME);
+		error = security_path_truncate(&file->f_path);
 	if (!error)
 		error = do_truncate(dentry, length, ATTR_MTIME|ATTR_CTIME, file);
 out_putf:
@@ -367,7 +366,7 @@ SYSCALL_DEFINE1(chdir, const char __user *, filename)
 	if (error)
 		goto out;
 
-	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_CHDIR);
 	if (error)
 		goto dput_and_out;
 
@@ -396,7 +395,7 @@ SYSCALL_DEFINE1(fchdir, unsigned int, fd)
 	if (!S_ISDIR(inode->i_mode))
 		goto out_putf;
 
-	error = inode_permission(inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(inode, MAY_EXEC | MAY_CHDIR);
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
@@ -414,7 +413,7 @@ SYSCALL_DEFINE1(chroot, const char __user *, filename)
 	if (error)
 		goto out;
 
-	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_CHDIR);
 	if (error)
 		goto dput_and_out;
 
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 3e73de5967f..fc8497643fd 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -74,6 +74,7 @@ int ibm_partition(struct parsed_partitions *state)
 	} *label;
 	unsigned char *data;
 	Sector sect;
+	sector_t labelsect;
 
 	res = 0;
 	blocksize = bdev_logical_block_size(bdev);
@@ -98,10 +99,19 @@ int ibm_partition(struct parsed_partitions *state)
 		goto out_freeall;
 
 	/*
+	 * Special case for FBA disks: label sector does not depend on
+	 * blocksize.
+	 */
+	if ((info->cu_type == 0x6310 && info->dev_type == 0x9336) ||
+	    (info->cu_type == 0x3880 && info->dev_type == 0x3370))
+		labelsect = info->label_block;
+	else
+		labelsect = info->label_block * (blocksize >> 9);
+
+	/*
 	 * Get volume label, extract name and type.
 	 */
-	data = read_part_sector(state, info->label_block*(blocksize/512),
-				&sect);
+	data = read_part_sector(state, labelsect, &sect);
 	if (data == NULL)
 		goto out_readerr;
 
diff --git a/fs/pipe.c b/fs/pipe.c
index db6eaaba0dd..279eef96c51 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -26,9 +26,14 @@
 
 /*
  * The max size that a non-root user is allowed to grow the pipe. Can
- * be set by root in /proc/sys/fs/pipe-max-pages
+ * be set by root in /proc/sys/fs/pipe-max-size
  */
-unsigned int pipe_max_pages = PIPE_DEF_BUFFERS * 16;
+unsigned int pipe_max_size = 1048576;
+
+/*
+ * Minimum pipe size, as required by POSIX
+ */
+unsigned int pipe_min_size = PAGE_SIZE;
 
 /*
  * We use a start+len construction, which provides full use of the 
@@ -1118,26 +1123,20 @@ SYSCALL_DEFINE1(pipe, int __user *, fildes)
  * Allocate a new array of pipe buffers and copy the info over. Returns the
  * pipe size if successful, or return -ERROR on error.
  */
-static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
+static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long nr_pages)
 {
 	struct pipe_buffer *bufs;
 
 	/*
-	 * Must be a power-of-2 currently
-	 */
-	if (!is_power_of_2(arg))
-		return -EINVAL;
-
-	/*
 	 * We can shrink the pipe, if arg >= pipe->nrbufs. Since we don't
 	 * expect a lot of shrink+grow operations, just free and allocate
 	 * again like we would do for growing. If the pipe currently
 	 * contains more buffers than arg, then return busy.
 	 */
-	if (arg < pipe->nrbufs)
+	if (nr_pages < pipe->nrbufs)
 		return -EBUSY;
 
-	bufs = kcalloc(arg, sizeof(struct pipe_buffer), GFP_KERNEL);
+	bufs = kcalloc(nr_pages, sizeof(struct pipe_buffer), GFP_KERNEL);
 	if (unlikely(!bufs))
 		return -ENOMEM;
 
@@ -1146,20 +1145,56 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
 	 * and adjust the indexes.
 	 */
 	if (pipe->nrbufs) {
-		const unsigned int tail = pipe->nrbufs & (pipe->buffers - 1);
-		const unsigned int head = pipe->nrbufs - tail;
+		unsigned int tail;
+		unsigned int head;
+
+		tail = pipe->curbuf + pipe->nrbufs;
+		if (tail < pipe->buffers)
+			tail = 0;
+		else
+			tail &= (pipe->buffers - 1);
 
+		head = pipe->nrbufs - tail;
 		if (head)
 			memcpy(bufs, pipe->bufs + pipe->curbuf, head * sizeof(struct pipe_buffer));
 		if (tail)
-			memcpy(bufs + head, pipe->bufs + pipe->curbuf, tail * sizeof(struct pipe_buffer));
+			memcpy(bufs + head, pipe->bufs, tail * sizeof(struct pipe_buffer));
 	}
 
 	pipe->curbuf = 0;
 	kfree(pipe->bufs);
 	pipe->bufs = bufs;
-	pipe->buffers = arg;
-	return arg;
+	pipe->buffers = nr_pages;
+	return nr_pages * PAGE_SIZE;
+}
+
+/*
+ * Currently we rely on the pipe array holding a power-of-2 number
+ * of pages.
+ */
+static inline unsigned int round_pipe_size(unsigned int size)
+{
+	unsigned long nr_pages;
+
+	nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	return roundup_pow_of_two(nr_pages) << PAGE_SHIFT;
+}
+
+/*
+ * This should work even if CONFIG_PROC_FS isn't set, as proc_dointvec_minmax
+ * will return an error.
+ */
+int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
+		 size_t *lenp, loff_t *ppos)
+{
+	int ret;
+
+	ret = proc_dointvec_minmax(table, write, buf, lenp, ppos);
+	if (ret < 0 || !write)
+		return ret;
+
+	pipe_max_size = round_pipe_size(pipe_max_size);
+	return ret;
 }
 
 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -1174,23 +1209,25 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
 	mutex_lock(&pipe->inode->i_mutex);
 
 	switch (cmd) {
-	case F_SETPIPE_SZ:
-		if (!capable(CAP_SYS_ADMIN) && arg > pipe_max_pages) {
-			ret = -EINVAL;
+	case F_SETPIPE_SZ: {
+		unsigned int size, nr_pages;
+
+		size = round_pipe_size(arg);
+		nr_pages = size >> PAGE_SHIFT;
+
+		ret = -EINVAL;
+		if (!nr_pages)
 			goto out;
-		}
-		/*
-		 * The pipe needs to be at least 2 pages large to
-		 * guarantee POSIX behaviour.
-		 */
-		if (arg < 2) {
-			ret = -EINVAL;
+
+		if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
+			ret = -EPERM;
 			goto out;
 		}
-		ret = pipe_set_size(pipe, arg);
+		ret = pipe_set_size(pipe, nr_pages);
 		break;
+		}
 	case F_GETPIPE_SZ:
-		ret = pipe->buffers;
+		ret = pipe->buffers * PAGE_SIZE;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 9b58d38bc91..fff6572676a 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -176,7 +176,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
 		if (tracer)
 			tpid = task_pid_nr_ns(tracer, ns);
 	}
-	cred = get_cred((struct cred *) __task_cred(p));
+	cred = get_task_cred(p);
 	seq_printf(m,
 		"State:\t%s\n"
 		"Tgid:\t%d\n"
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index ce94801f48c..d9396a4fc7f 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -209,6 +209,9 @@ void proc_device_tree_add_node(struct device_node *np,
 	for (pp = np->properties; pp != NULL; pp = pp->next) {
 		p = pp->name;
 
+		if (strchr(p, '/'))
+			continue;
+
 		if (duplicate_name(de, p))
 			p = fixup_name(np, de, p);
 
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 46d4b5d72bd..cb6306e6384 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -122,11 +122,20 @@ int task_statm(struct mm_struct *mm, int *shared, int *text,
 	return size;
 }
 
+static void pad_len_spaces(struct seq_file *m, int len)
+{
+	len = 25 + sizeof(void*) * 6 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c", len, ' ');
+}
+
 /*
  * display a single VMA to a sequenced file
  */
 static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 {
+	struct mm_struct *mm = vma->vm_mm;
 	unsigned long ino = 0;
 	struct file *file;
 	dev_t dev = 0;
@@ -155,11 +164,14 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 		   MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (file) {
-		len = 25 + sizeof(void *) * 6 - len;
-		if (len < 1)
-			len = 1;
-		seq_printf(m, "%*c", len, ' ');
+		pad_len_spaces(m, len);
 		seq_path(m, &file->f_path, "");
+	} else if (mm) {
+		if (vma->vm_start <= mm->start_stack &&
+			vma->vm_end >= mm->start_stack) {
+			pad_len_spaces(m, len);
+			seq_puts(m, "[stack]");
+		}
 	}
 
 	seq_putc(m, '\n');
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 12c233da1b6..437d2ca2de9 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -676,7 +676,7 @@ static void prune_dqcache(int count)
  * This is called from kswapd when we think we need some
  * more memory
  */
-static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dqcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		spin_lock(&dq_list_lock);
diff --git a/fs/splice.c b/fs/splice.c
index ac22b00d86c..efdbfece993 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -354,7 +354,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos,
 				break;
 
 			error = add_to_page_cache_lru(page, mapping, index,
-						mapping_gfp_mask(mapping));
+						GFP_KERNEL);
 			if (unlikely(error)) {
 				page_cache_release(page);
 				if (error == -EEXIST)
@@ -1282,7 +1282,8 @@ static int direct_splice_actor(struct pipe_inode_info *pipe,
 {
 	struct file *file = sd->u.file;
 
-	return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
+	return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
+			      sd->flags);
 }
 
 /**
@@ -1371,8 +1372,7 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		if (off_in)
 			return -ESPIPE;
 		if (off_out) {
-			if (!out->f_op || !out->f_op->llseek ||
-			    out->f_op->llseek == no_llseek)
+			if (!(out->f_mode & FMODE_PWRITE))
 				return -EINVAL;
 			if (copy_from_user(&offset, off_out, sizeof(loff_t)))
 				return -EFAULT;
@@ -1392,8 +1392,7 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		if (off_out)
 			return -ESPIPE;
 		if (off_in) {
-			if (!in->f_op || !in->f_op->llseek ||
-			    in->f_op->llseek == no_llseek)
+			if (!(in->f_mode & FMODE_PREAD))
 				return -EINVAL;
 			if (copy_from_user(&offset, off_in, sizeof(loff_t)))
 				return -EFAULT;
diff --git a/fs/super.c b/fs/super.c
index 5c35bc7a499..938119ab8dc 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -374,6 +374,8 @@ void sync_supers(void)
 			up_read(&sb->s_umount);
 
 			spin_lock(&sb_lock);
+			/* lock was dropped, must reset next */
+			list_safe_reset_next(sb, n, s_list);
 			__put_super(sb);
 		}
 	}
@@ -405,6 +407,8 @@ void iterate_supers(void (*f)(struct super_block *, void *), void *arg)
 		up_read(&sb->s_umount);
 
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		__put_super(sb);
 	}
 	spin_unlock(&sb_lock);
@@ -585,6 +589,8 @@ static void do_emergency_remount(struct work_struct *work)
 		}
 		up_write(&sb->s_umount);
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		__put_super(sb);
 	}
 	spin_unlock(&sb_lock);
diff --git a/fs/sync.c b/fs/sync.c
index c9f83f480ec..15aa6f03b2d 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -42,7 +42,7 @@ static int __sync_filesystem(struct super_block *sb, int wait)
 	if (wait)
 		sync_inodes_sb(sb);
 	else
-		writeback_inodes_sb_locked(sb);
+		writeback_inodes_sb(sb);
 
 	if (sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, wait);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index bde1a4c3679..0835a3b70e0 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -117,11 +117,13 @@ int sysfs_setattr(struct dentry *dentry, struct iattr *iattr)
 	if (error)
 		goto out;
 
+	error = sysfs_sd_setattr(sd, iattr);
+	if (error)
+		goto out;
+
 	/* this ignores size changes */
 	generic_setattr(inode, iattr);
 
-	error = sysfs_sd_setattr(sd, iattr);
-
 out:
 	mutex_unlock(&sysfs_mutex);
 	return error;
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index f71246bebfe..a7ac78f8e67 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -28,6 +28,7 @@ static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
 	struct sysfs_dirent *target_sd = NULL;
 	struct sysfs_dirent *sd = NULL;
 	struct sysfs_addrm_cxt acxt;
+	enum kobj_ns_type ns_type;
 	int error;
 
 	BUG_ON(!name);
@@ -58,16 +59,29 @@ static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
 	if (!sd)
 		goto out_put;
 
-	if (sysfs_ns_type(parent_sd))
+	ns_type = sysfs_ns_type(parent_sd);
+	if (ns_type)
 		sd->s_ns = target->ktype->namespace(target);
 	sd->s_symlink.target_sd = target_sd;
 	target_sd = NULL;	/* reference is now owned by the symlink */
 
 	sysfs_addrm_start(&acxt, parent_sd);
-	if (warn)
-		error = sysfs_add_one(&acxt, sd);
-	else
-		error = __sysfs_add_one(&acxt, sd);
+	/* Symlinks must be between directories with the same ns_type */
+	if (!ns_type ||
+	    (ns_type == sysfs_ns_type(sd->s_symlink.target_sd->s_parent))) {
+		if (warn)
+			error = sysfs_add_one(&acxt, sd);
+		else
+			error = __sysfs_add_one(&acxt, sd);
+	} else {
+		error = -EINVAL;
+		WARN(1, KERN_WARNING
+			"sysfs: symlink across ns_types %s/%s -> %s/%s\n",
+			parent_sd->s_name,
+			sd->s_name,
+			sd->s_symlink.target_sd->s_parent->s_name,
+			sd->s_symlink.target_sd->s_name);
+	}
 	sysfs_addrm_finish(&acxt);
 
 	if (error)
@@ -122,7 +136,7 @@ void sysfs_delete_link(struct kobject *kobj, struct kobject *targ,
 {
 	const void *ns = NULL;
 	spin_lock(&sysfs_assoc_lock);
-	if (targ->sd)
+	if (targ->sd && sysfs_ns_type(kobj->sd))
 		ns = targ->sd->s_ns;
 	spin_unlock(&sysfs_assoc_lock);
 	sysfs_hash_and_remove(kobj->sd, ns, name);
diff --git a/fs/sysv/ialloc.c b/fs/sysv/ialloc.c
index bbd69bdb0fa..fcc498ec9b3 100644
--- a/fs/sysv/ialloc.c
+++ b/fs/sysv/ialloc.c
@@ -25,6 +25,7 @@
 #include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/buffer_head.h>
+#include <linux/writeback.h>
 #include "sysv.h"
 
 /* We don't trust the value of
@@ -139,6 +140,9 @@ struct inode * sysv_new_inode(const struct inode * dir, mode_t mode)
 	struct inode *inode;
 	sysv_ino_t ino;
 	unsigned count;
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_NONE
+	};
 
 	inode = new_inode(sb);
 	if (!inode)
@@ -168,7 +172,7 @@ struct inode * sysv_new_inode(const struct inode * dir, mode_t mode)
 	insert_inode_hash(inode);
 	mark_inode_dirty(inode);
 
-	sysv_write_inode(inode, 0);	/* ensure inode not allocated again */
+	sysv_write_inode(inode, &wbc);	/* ensure inode not allocated again */
 	mark_inode_dirty(inode);	/* cleared by sysv_write_inode() */
 	/* That's it. */
 	unlock_super(sb);
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 076ca50e993..c8ff0d1ae5d 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -62,7 +62,9 @@
  */
 static void shrink_liability(struct ubifs_info *c, int nr_to_write)
 {
+	down_read(&c->vfs_sb->s_umount);
 	writeback_inodes_sb(c->vfs_sb);
+	up_read(&c->vfs_sb->s_umount);
 }
 
 /**
diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c
index ad7f67b827e..0084a33c4c6 100644
--- a/fs/ubifs/lpt.c
+++ b/fs/ubifs/lpt.c
@@ -1457,13 +1457,13 @@ struct ubifs_lprops *ubifs_lpt_lookup(struct ubifs_info *c, int lnum)
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -1586,7 +1586,7 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
 	nnode = c->nroot;
 	nnode = dirty_cow_nnode(c, nnode);
 	if (IS_ERR(nnode))
-		return ERR_PTR(PTR_ERR(nnode));
+		return ERR_CAST(nnode);
 	i = lnum - c->main_first;
 	shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
 	for (h = 1; h < c->lpt_hght; h++) {
@@ -1594,19 +1594,19 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 		nnode = dirty_cow_nnode(c, nnode);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	pnode = dirty_cow_pnode(c, pnode);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index 13cb7a4237b..d12535b7fc7 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -646,7 +646,7 @@ static struct ubifs_pnode *pnode_lookup(struct ubifs_info *c, int i)
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	return ubifs_get_pnode(c, nnode, iip);
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 109c6ea03bb..daae9e1f538 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -24,7 +24,7 @@
  * This file implements functions needed to recover from unclean un-mounts.
  * When UBIFS is mounted, it checks a flag on the master node to determine if
  * an un-mount was completed successfully. If not, the process of mounting
- * incorparates additional checking and fixing of on-flash data structures.
+ * incorporates additional checking and fixing of on-flash data structures.
  * UBIFS always cleans away all remnants of an unclean un-mount, so that
  * errors do not accumulate. However UBIFS defers recovery if it is mounted
  * read-only, and the flash is not modified in that case.
@@ -1063,8 +1063,21 @@ int ubifs_rcvry_gc_commit(struct ubifs_info *c)
 	}
 	err = ubifs_find_dirty_leb(c, &lp, wbuf->offs, 2);
 	if (err) {
-		if (err == -ENOSPC)
-			dbg_err("could not find a dirty LEB");
+		/*
+		 * There are no dirty or empty LEBs subject to here being
+		 * enough for the index. Try to use
+		 * 'ubifs_find_free_leb_for_idx()', which will return any empty
+		 * LEBs (ignoring index requirements). If the index then
+		 * doesn't have enough LEBs the recovery commit will fail -
+		 * which is the  same result anyway i.e. recovery fails. So
+		 * there is no problem ignoring index  requirements and just
+		 * grabbing a free LEB since we have already established there
+		 * is not a dirty LEB we could have used instead.
+		 */
+		if (err == -ENOSPC) {
+			dbg_rcvry("could not find a dirty LEB");
+			goto find_free;
+		}
 		return err;
 	}
 	ubifs_assert(!(lp.flags & LPROPS_INDEX));
@@ -1139,8 +1152,8 @@ int ubifs_rcvry_gc_commit(struct ubifs_info *c)
 find_free:
 	/*
 	 * There is no GC head LEB or the free space in the GC head LEB is too
-	 * small. Allocate gc_lnum by calling 'ubifs_find_free_leb_for_idx()' so
-	 * GC is not run.
+	 * small, or there are not dirty LEBs. Allocate gc_lnum by calling
+	 * 'ubifs_find_free_leb_for_idx()' so GC is not run.
 	 */
 	lnum = ubifs_find_free_leb_for_idx(c);
 	if (lnum < 0) {
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index 02feb59cefc..0b201114a5a 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -277,7 +277,7 @@ static int kick_a_thread(void)
 	return 0;
 }
 
-int ubifs_shrinker(int nr, gfp_t gfp_mask)
+int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	int freed, contention = 0;
 	long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 4d2f2157dd3..5fc5a098897 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1307,6 +1307,8 @@ static int mount_ubifs(struct ubifs_info *c)
 			if (err)
 				goto out_orphans;
 			err = ubifs_rcvry_gc_commit(c);
+			if (err)
+				goto out_orphans;
 		} else {
 			err = take_gc_lnum(c);
 			if (err)
@@ -1318,7 +1320,7 @@ static int mount_ubifs(struct ubifs_info *c)
 			 */
 			err = ubifs_leb_unmap(c, c->gc_lnum);
 			if (err)
-				return err;
+				goto out_orphans;
 		}
 
 		err = dbg_check_lprops(c);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 2eef553d50c..04310878f44 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1575,7 +1575,7 @@ int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot);
 int ubifs_tnc_end_commit(struct ubifs_info *c);
 
 /* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
 
 /* commit.c */
 int ubifs_bg_thread(void *info);
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index c8fb13f83b3..0dce969d6ca 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -87,11 +87,9 @@ xfs-y				+= xfs_alloc.o \
 				   xfs_trans_buf.o \
 				   xfs_trans_extfree.o \
 				   xfs_trans_inode.o \
-				   xfs_trans_item.o \
 				   xfs_utils.o \
 				   xfs_vnodeops.o \
-				   xfs_rw.o \
-				   xfs_dmops.o
+				   xfs_rw.o
 
 xfs-$(CONFIG_XFS_TRACE)		+= xfs_btree_trace.o
 
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 9f769b5b38f..b2771862fd3 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -225,7 +225,7 @@ xfs_check_acl(struct inode *inode, int mask)
 	struct posix_acl *acl;
 	int error = -EAGAIN;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_check_acl(ip);
 
 	/*
 	 * If there is no attribute fork no ACL exists on this inode and
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 089eaca860b..d24e78f32f3 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -21,19 +21,12 @@
 #include "xfs_inum.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_trans.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
 #include "xfs_iomap.h"
@@ -92,18 +85,15 @@ void
 xfs_count_page_state(
 	struct page		*page,
 	int			*delalloc,
-	int			*unmapped,
 	int			*unwritten)
 {
 	struct buffer_head	*bh, *head;
 
-	*delalloc = *unmapped = *unwritten = 0;
+	*delalloc = *unwritten = 0;
 
 	bh = head = page_buffers(page);
 	do {
-		if (buffer_uptodate(bh) && !buffer_mapped(bh))
-			(*unmapped) = 1;
-		else if (buffer_unwritten(bh))
+		if (buffer_unwritten(bh))
 			(*unwritten) = 1;
 		else if (buffer_delay(bh))
 			(*delalloc) = 1;
@@ -212,23 +202,17 @@ xfs_setfilesize(
 }
 
 /*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
+ * Schedule IO completion handling on the final put of an ioend.
  */
 STATIC void
 xfs_finish_ioend(
-	xfs_ioend_t	*ioend,
-	int		wait)
+	struct xfs_ioend	*ioend)
 {
 	if (atomic_dec_and_test(&ioend->io_remaining)) {
-		struct workqueue_struct *wq;
-
-		wq = (ioend->io_type == IO_UNWRITTEN) ?
-			xfsconvertd_workqueue : xfsdatad_workqueue;
-		queue_work(wq, &ioend->io_work);
-		if (wait)
-			flush_workqueue(wq);
+		if (ioend->io_type == IO_UNWRITTEN)
+			queue_work(xfsconvertd_workqueue, &ioend->io_work);
+		else
+			queue_work(xfsdatad_workqueue, &ioend->io_work);
 	}
 }
 
@@ -272,11 +256,25 @@ xfs_end_io(
 	 */
 	if (error == EAGAIN) {
 		atomic_inc(&ioend->io_remaining);
-		xfs_finish_ioend(ioend, 0);
+		xfs_finish_ioend(ioend);
 		/* ensure we don't spin on blocked ioends */
 		delay(1);
-	} else
+	} else {
+		if (ioend->io_iocb)
+			aio_complete(ioend->io_iocb, ioend->io_result, 0);
 		xfs_destroy_ioend(ioend);
+	}
+}
+
+/*
+ * Call IO completion handling in caller context on the final put of an ioend.
+ */
+STATIC void
+xfs_finish_ioend_sync(
+	struct xfs_ioend	*ioend)
+{
+	if (atomic_dec_and_test(&ioend->io_remaining))
+		xfs_end_io(&ioend->io_work);
 }
 
 /*
@@ -309,6 +307,8 @@ xfs_alloc_ioend(
 	atomic_inc(&XFS_I(ioend->io_inode)->i_iocount);
 	ioend->io_offset = 0;
 	ioend->io_size = 0;
+	ioend->io_iocb = NULL;
+	ioend->io_result = 0;
 
 	INIT_WORK(&ioend->io_work, xfs_end_io);
 	return ioend;
@@ -358,7 +358,7 @@ xfs_end_bio(
 	bio->bi_end_io = NULL;
 	bio_put(bio);
 
-	xfs_finish_ioend(ioend, 0);
+	xfs_finish_ioend(ioend);
 }
 
 STATIC void
@@ -500,7 +500,7 @@ xfs_submit_ioend(
 		}
 		if (bio)
 			xfs_submit_ioend_bio(wbc, ioend, bio);
-		xfs_finish_ioend(ioend, 0);
+		xfs_finish_ioend(ioend);
 	} while ((ioend = next) != NULL);
 }
 
@@ -614,31 +614,30 @@ xfs_map_at_offset(
 STATIC unsigned int
 xfs_probe_page(
 	struct page		*page,
-	unsigned int		pg_offset,
-	int			mapped)
+	unsigned int		pg_offset)
 {
+	struct buffer_head	*bh, *head;
 	int			ret = 0;
 
 	if (PageWriteback(page))
 		return 0;
+	if (!PageDirty(page))
+		return 0;
+	if (!page->mapping)
+		return 0;
+	if (!page_has_buffers(page))
+		return 0;
 
-	if (page->mapping && PageDirty(page)) {
-		if (page_has_buffers(page)) {
-			struct buffer_head	*bh, *head;
-
-			bh = head = page_buffers(page);
-			do {
-				if (!buffer_uptodate(bh))
-					break;
-				if (mapped != buffer_mapped(bh))
-					break;
-				ret += bh->b_size;
-				if (ret >= pg_offset)
-					break;
-			} while ((bh = bh->b_this_page) != head);
-		} else
-			ret = mapped ? 0 : PAGE_CACHE_SIZE;
-	}
+	bh = head = page_buffers(page);
+	do {
+		if (!buffer_uptodate(bh))
+			break;
+		if (!buffer_mapped(bh))
+			break;
+		ret += bh->b_size;
+		if (ret >= pg_offset)
+			break;
+	} while ((bh = bh->b_this_page) != head);
 
 	return ret;
 }
@@ -648,8 +647,7 @@ xfs_probe_cluster(
 	struct inode		*inode,
 	struct page		*startpage,
 	struct buffer_head	*bh,
-	struct buffer_head	*head,
-	int			mapped)
+	struct buffer_head	*head)
 {
 	struct pagevec		pvec;
 	pgoff_t			tindex, tlast, tloff;
@@ -658,7 +656,7 @@ xfs_probe_cluster(
 
 	/* First sum forwards in this page */
 	do {
-		if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
+		if (!buffer_uptodate(bh) || !buffer_mapped(bh))
 			return total;
 		total += bh->b_size;
 	} while ((bh = bh->b_this_page) != head);
@@ -692,7 +690,7 @@ xfs_probe_cluster(
 				pg_offset = PAGE_CACHE_SIZE;
 
 			if (page->index == tindex && trylock_page(page)) {
-				pg_len = xfs_probe_page(page, pg_offset, mapped);
+				pg_len = xfs_probe_page(page, pg_offset);
 				unlock_page(page);
 			}
 
@@ -761,7 +759,6 @@ xfs_convert_page(
 	struct xfs_bmbt_irec	*imap,
 	xfs_ioend_t		**ioendp,
 	struct writeback_control *wbc,
-	int			startio,
 	int			all_bh)
 {
 	struct buffer_head	*bh, *head;
@@ -832,19 +829,14 @@ xfs_convert_page(
 			ASSERT(imap->br_startblock != DELAYSTARTBLOCK);
 
 			xfs_map_at_offset(inode, bh, imap, offset);
-			if (startio) {
-				xfs_add_to_ioend(inode, bh, offset,
-						type, ioendp, done);
-			} else {
-				set_buffer_dirty(bh);
-				unlock_buffer(bh);
-				mark_buffer_dirty(bh);
-			}
+			xfs_add_to_ioend(inode, bh, offset, type,
+					 ioendp, done);
+
 			page_dirty--;
 			count++;
 		} else {
 			type = IO_NEW;
-			if (buffer_mapped(bh) && all_bh && startio) {
+			if (buffer_mapped(bh) && all_bh) {
 				lock_buffer(bh);
 				xfs_add_to_ioend(inode, bh, offset,
 						type, ioendp, done);
@@ -859,14 +851,12 @@ xfs_convert_page(
 	if (uptodate && bh == head)
 		SetPageUptodate(page);
 
-	if (startio) {
-		if (count) {
-			wbc->nr_to_write--;
-			if (wbc->nr_to_write <= 0)
-				done = 1;
-		}
-		xfs_start_page_writeback(page, !page_dirty, count);
+	if (count) {
+		wbc->nr_to_write--;
+		if (wbc->nr_to_write <= 0)
+			done = 1;
 	}
+	xfs_start_page_writeback(page, !page_dirty, count);
 
 	return done;
  fail_unlock_page:
@@ -886,7 +876,6 @@ xfs_cluster_write(
 	struct xfs_bmbt_irec	*imap,
 	xfs_ioend_t		**ioendp,
 	struct writeback_control *wbc,
-	int			startio,
 	int			all_bh,
 	pgoff_t			tlast)
 {
@@ -902,7 +891,7 @@ xfs_cluster_write(
 
 		for (i = 0; i < pagevec_count(&pvec); i++) {
 			done = xfs_convert_page(inode, pvec.pages[i], tindex++,
-					imap, ioendp, wbc, startio, all_bh);
+					imap, ioendp, wbc, all_bh);
 			if (done)
 				break;
 		}
@@ -981,7 +970,7 @@ xfs_aops_discard_page(
 		 */
 		error = xfs_bmapi(NULL, ip, offset_fsb, 1,
 				XFS_BMAPI_ENTIRE,  NULL, 0, &imap,
-				&nimaps, NULL, NULL);
+				&nimaps, NULL);
 
 		if (error) {
 			/* something screwed, just bail */
@@ -1009,7 +998,7 @@ xfs_aops_discard_page(
 		 */
 		xfs_bmap_init(&flist, &firstblock);
 		error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
-					&flist, NULL, &done);
+					&flist, &done);
 
 		ASSERT(!flist.xbf_count && !flist.xbf_first);
 		if (error) {
@@ -1032,50 +1021,66 @@ out_invalidate:
 }
 
 /*
- * Calling this without startio set means we are being asked to make a dirty
- * page ready for freeing it's buffers.  When called with startio set then
- * we are coming from writepage.
+ * Write out a dirty page.
+ *
+ * For delalloc space on the page we need to allocate space and flush it.
+ * For unwritten space on the page we need to start the conversion to
+ * regular allocated space.
+ * For any other dirty buffer heads on the page we should flush them.
  *
- * When called with startio set it is important that we write the WHOLE
- * page if possible.
- * The bh->b_state's cannot know if any of the blocks or which block for
- * that matter are dirty due to mmap writes, and therefore bh uptodate is
- * only valid if the page itself isn't completely uptodate.  Some layers
- * may clear the page dirty flag prior to calling write page, under the
- * assumption the entire page will be written out; by not writing out the
- * whole page the page can be reused before all valid dirty data is
- * written out.  Note: in the case of a page that has been dirty'd by
- * mapwrite and but partially setup by block_prepare_write the
- * bh->b_states's will not agree and only ones setup by BPW/BCW will have
- * valid state, thus the whole page must be written out thing.
+ * If we detect that a transaction would be required to flush the page, we
+ * have to check the process flags first, if we are already in a transaction
+ * or disk I/O during allocations is off, we need to fail the writepage and
+ * redirty the page.
  */
-
 STATIC int
-xfs_page_state_convert(
-	struct inode	*inode,
-	struct page	*page,
-	struct writeback_control *wbc,
-	int		startio,
-	int		unmapped) /* also implies page uptodate */
+xfs_vm_writepage(
+	struct page		*page,
+	struct writeback_control *wbc)
 {
+	struct inode		*inode = page->mapping->host;
+	int			delalloc, unwritten;
 	struct buffer_head	*bh, *head;
 	struct xfs_bmbt_irec	imap;
 	xfs_ioend_t		*ioend = NULL, *iohead = NULL;
 	loff_t			offset;
-	unsigned long           p_offset = 0;
 	unsigned int		type;
 	__uint64_t              end_offset;
 	pgoff_t                 end_index, last_index;
 	ssize_t			size, len;
 	int			flags, err, imap_valid = 0, uptodate = 1;
-	int			page_dirty, count = 0;
-	int			trylock = 0;
-	int			all_bh = unmapped;
+	int			count = 0;
+	int			all_bh = 0;
 
-	if (startio) {
-		if (wbc->sync_mode == WB_SYNC_NONE && wbc->nonblocking)
-			trylock |= BMAPI_TRYLOCK;
-	}
+	trace_xfs_writepage(inode, page, 0);
+
+	ASSERT(page_has_buffers(page));
+
+	/*
+	 * Refuse to write the page out if we are called from reclaim context.
+	 *
+	 * This avoids stack overflows when called from deeply used stacks in
+	 * random callers for direct reclaim or memcg reclaim.  We explicitly
+	 * allow reclaim from kswapd as the stack usage there is relatively low.
+	 *
+	 * This should really be done by the core VM, but until that happens
+	 * filesystems like XFS, btrfs and ext4 have to take care of this
+	 * by themselves.
+	 */
+	if ((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == PF_MEMALLOC)
+		goto out_fail;
+
+	/*
+	 * We need a transaction if there are delalloc or unwritten buffers
+	 * on the page.
+	 *
+	 * If we need a transaction and the process flags say we are already
+	 * in a transaction, or no IO is allowed then mark the page dirty
+	 * again and leave the page as is.
+	 */
+	xfs_count_page_state(page, &delalloc, &unwritten);
+	if ((current->flags & PF_FSTRANS) && (delalloc || unwritten))
+		goto out_fail;
 
 	/* Is this page beyond the end of the file? */
 	offset = i_size_read(inode);
@@ -1084,50 +1089,33 @@ xfs_page_state_convert(
 	if (page->index >= end_index) {
 		if ((page->index >= end_index + 1) ||
 		    !(i_size_read(inode) & (PAGE_CACHE_SIZE - 1))) {
-			if (startio)
-				unlock_page(page);
+			unlock_page(page);
 			return 0;
 		}
 	}
 
-	/*
-	 * page_dirty is initially a count of buffers on the page before
-	 * EOF and is decremented as we move each into a cleanable state.
-	 *
-	 * Derivation:
-	 *
-	 * End offset is the highest offset that this page should represent.
-	 * If we are on the last page, (end_offset & (PAGE_CACHE_SIZE - 1))
-	 * will evaluate non-zero and be less than PAGE_CACHE_SIZE and
-	 * hence give us the correct page_dirty count. On any other page,
-	 * it will be zero and in that case we need page_dirty to be the
-	 * count of buffers on the page.
- 	 */
 	end_offset = min_t(unsigned long long,
-			(xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT, offset);
+			(xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT,
+			offset);
 	len = 1 << inode->i_blkbits;
-	p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1),
-					PAGE_CACHE_SIZE);
-	p_offset = p_offset ? roundup(p_offset, len) : PAGE_CACHE_SIZE;
-	page_dirty = p_offset / len;
 
 	bh = head = page_buffers(page);
 	offset = page_offset(page);
 	flags = BMAPI_READ;
 	type = IO_NEW;
 
-	/* TODO: cleanup count and page_dirty */
-
 	do {
 		if (offset >= end_offset)
 			break;
 		if (!buffer_uptodate(bh))
 			uptodate = 0;
-		if (!(PageUptodate(page) || buffer_uptodate(bh)) && !startio) {
-			/*
-			 * the iomap is actually still valid, but the ioend
-			 * isn't.  shouldn't happen too often.
-			 */
+
+		/*
+		 * A hole may still be marked uptodate because discard_buffer
+		 * leaves the flag set.
+		 */
+		if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
+			ASSERT(!buffer_dirty(bh));
 			imap_valid = 0;
 			continue;
 		}
@@ -1135,19 +1123,7 @@ xfs_page_state_convert(
 		if (imap_valid)
 			imap_valid = xfs_imap_valid(inode, &imap, offset);
 
-		/*
-		 * First case, map an unwritten extent and prepare for
-		 * extent state conversion transaction on completion.
-		 *
-		 * Second case, allocate space for a delalloc buffer.
-		 * We can return EAGAIN here in the release page case.
-		 *
-		 * Third case, an unmapped buffer was found, and we are
-		 * in a path where we need to write the whole page out.
-		 */
-		if (buffer_unwritten(bh) || buffer_delay(bh) ||
-		    ((buffer_uptodate(bh) || PageUptodate(page)) &&
-		     !buffer_mapped(bh) && (unmapped || startio))) {
+		if (buffer_unwritten(bh) || buffer_delay(bh)) {
 			int new_ioend = 0;
 
 			/*
@@ -1161,15 +1137,16 @@ xfs_page_state_convert(
 				flags = BMAPI_WRITE | BMAPI_IGNSTATE;
 			} else if (buffer_delay(bh)) {
 				type = IO_DELAY;
-				flags = BMAPI_ALLOCATE | trylock;
-			} else {
-				type = IO_NEW;
-				flags = BMAPI_WRITE | BMAPI_MMAP;
+				flags = BMAPI_ALLOCATE;
+
+				if (wbc->sync_mode == WB_SYNC_NONE &&
+				    wbc->nonblocking)
+					flags |= BMAPI_TRYLOCK;
 			}
 
 			if (!imap_valid) {
 				/*
-				 * if we didn't have a valid mapping then we
+				 * If we didn't have a valid mapping then we
 				 * need to ensure that we put the new mapping
 				 * in a new ioend structure. This needs to be
 				 * done to ensure that the ioends correctly
@@ -1177,14 +1154,7 @@ xfs_page_state_convert(
 				 * for unwritten extent conversion.
 				 */
 				new_ioend = 1;
-				if (type == IO_NEW) {
-					size = xfs_probe_cluster(inode,
-							page, bh, head, 0);
-				} else {
-					size = len;
-				}
-
-				err = xfs_map_blocks(inode, offset, size,
+				err = xfs_map_blocks(inode, offset, len,
 						&imap, flags);
 				if (err)
 					goto error;
@@ -1193,19 +1163,11 @@ xfs_page_state_convert(
 			}
 			if (imap_valid) {
 				xfs_map_at_offset(inode, bh, &imap, offset);
-				if (startio) {
-					xfs_add_to_ioend(inode, bh, offset,
-							type, &ioend,
-							new_ioend);
-				} else {
-					set_buffer_dirty(bh);
-					unlock_buffer(bh);
-					mark_buffer_dirty(bh);
-				}
-				page_dirty--;
+				xfs_add_to_ioend(inode, bh, offset, type,
+						 &ioend, new_ioend);
 				count++;
 			}
-		} else if (buffer_uptodate(bh) && startio) {
+		} else if (buffer_uptodate(bh)) {
 			/*
 			 * we got here because the buffer is already mapped.
 			 * That means it must already have extents allocated
@@ -1213,8 +1175,7 @@ xfs_page_state_convert(
 			 */
 			if (!imap_valid || flags != BMAPI_READ) {
 				flags = BMAPI_READ;
-				size = xfs_probe_cluster(inode, page, bh,
-								head, 1);
+				size = xfs_probe_cluster(inode, page, bh, head);
 				err = xfs_map_blocks(inode, offset, size,
 						&imap, flags);
 				if (err)
@@ -1233,18 +1194,16 @@ xfs_page_state_convert(
 			 */
 			type = IO_NEW;
 			if (trylock_buffer(bh)) {
-				ASSERT(buffer_mapped(bh));
 				if (imap_valid)
 					all_bh = 1;
 				xfs_add_to_ioend(inode, bh, offset, type,
 						&ioend, !imap_valid);
-				page_dirty--;
 				count++;
 			} else {
 				imap_valid = 0;
 			}
-		} else if ((buffer_uptodate(bh) || PageUptodate(page)) &&
-			   (unmapped || startio)) {
+		} else if (PageUptodate(page)) {
+			ASSERT(buffer_mapped(bh));
 			imap_valid = 0;
 		}
 
@@ -1256,8 +1215,7 @@ xfs_page_state_convert(
 	if (uptodate && bh == head)
 		SetPageUptodate(page);
 
-	if (startio)
-		xfs_start_page_writeback(page, 1, count);
+	xfs_start_page_writeback(page, 1, count);
 
 	if (ioend && imap_valid) {
 		xfs_off_t		end_index;
@@ -1275,124 +1233,27 @@ xfs_page_state_convert(
 			end_index = last_index;
 
 		xfs_cluster_write(inode, page->index + 1, &imap, &ioend,
-					wbc, startio, all_bh, end_index);
+					wbc, all_bh, end_index);
 	}
 
 	if (iohead)
 		xfs_submit_ioend(wbc, iohead);
 
-	return page_dirty;
+	return 0;
 
 error:
 	if (iohead)
 		xfs_cancel_ioend(iohead);
 
-	/*
-	 * If it's delalloc and we have nowhere to put it,
-	 * throw it away, unless the lower layers told
-	 * us to try again.
-	 */
-	if (err != -EAGAIN) {
-		if (!unmapped)
-			xfs_aops_discard_page(page);
-		ClearPageUptodate(page);
-	}
+	xfs_aops_discard_page(page);
+	ClearPageUptodate(page);
+	unlock_page(page);
 	return err;
-}
-
-/*
- * writepage: Called from one of two places:
- *
- * 1. we are flushing a delalloc buffer head.
- *
- * 2. we are writing out a dirty page. Typically the page dirty
- *    state is cleared before we get here. In this case is it
- *    conceivable we have no buffer heads.
- *
- * For delalloc space on the page we need to allocate space and
- * flush it. For unmapped buffer heads on the page we should
- * allocate space if the page is uptodate. For any other dirty
- * buffer heads on the page we should flush them.
- *
- * If we detect that a transaction would be required to flush
- * the page, we have to check the process flags first, if we
- * are already in a transaction or disk I/O during allocations
- * is off, we need to fail the writepage and redirty the page.
- */
-
-STATIC int
-xfs_vm_writepage(
-	struct page		*page,
-	struct writeback_control *wbc)
-{
-	int			error;
-	int			need_trans;
-	int			delalloc, unmapped, unwritten;
-	struct inode		*inode = page->mapping->host;
-
-	trace_xfs_writepage(inode, page, 0);
-
-	/*
-	 * We need a transaction if:
-	 *  1. There are delalloc buffers on the page
-	 *  2. The page is uptodate and we have unmapped buffers
-	 *  3. The page is uptodate and we have no buffers
-	 *  4. There are unwritten buffers on the page
-	 */
-
-	if (!page_has_buffers(page)) {
-		unmapped = 1;
-		need_trans = 1;
-	} else {
-		xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
-		if (!PageUptodate(page))
-			unmapped = 0;
-		need_trans = delalloc + unmapped + unwritten;
-	}
-
-	/*
-	 * If we need a transaction and the process flags say
-	 * we are already in a transaction, or no IO is allowed
-	 * then mark the page dirty again and leave the page
-	 * as is.
-	 */
-	if (current_test_flags(PF_FSTRANS) && need_trans)
-		goto out_fail;
-
-	/*
-	 * Delay hooking up buffer heads until we have
-	 * made our go/no-go decision.
-	 */
-	if (!page_has_buffers(page))
-		create_empty_buffers(page, 1 << inode->i_blkbits, 0);
-
-
-	/*
-	 *  VM calculation for nr_to_write seems off.  Bump it way
-	 *  up, this gets simple streaming writes zippy again.
-	 *  To be reviewed again after Jens' writeback changes.
-	 */
-	wbc->nr_to_write *= 4;
-
-	/*
-	 * Convert delayed allocate, unwritten or unmapped space
-	 * to real space and flush out to disk.
-	 */
-	error = xfs_page_state_convert(inode, page, wbc, 1, unmapped);
-	if (error == -EAGAIN)
-		goto out_fail;
-	if (unlikely(error < 0))
-		goto out_unlock;
-
-	return 0;
 
 out_fail:
 	redirty_page_for_writepage(wbc, page);
 	unlock_page(page);
 	return 0;
-out_unlock:
-	unlock_page(page);
-	return error;
 }
 
 STATIC int
@@ -1406,65 +1267,27 @@ xfs_vm_writepages(
 
 /*
  * Called to move a page into cleanable state - and from there
- * to be released. Possibly the page is already clean. We always
+ * to be released. The page should already be clean. We always
  * have buffer heads in this call.
  *
- * Returns 0 if the page is ok to release, 1 otherwise.
- *
- * Possible scenarios are:
- *
- * 1. We are being called to release a page which has been written
- *    to via regular I/O. buffer heads will be dirty and possibly
- *    delalloc. If no delalloc buffer heads in this case then we
- *    can just return zero.
- *
- * 2. We are called to release a page which has been written via
- *    mmap, all we need to do is ensure there is no delalloc
- *    state in the buffer heads, if not we can let the caller
- *    free them and we should come back later via writepage.
+ * Returns 1 if the page is ok to release, 0 otherwise.
  */
 STATIC int
 xfs_vm_releasepage(
 	struct page		*page,
 	gfp_t			gfp_mask)
 {
-	struct inode		*inode = page->mapping->host;
-	int			dirty, delalloc, unmapped, unwritten;
-	struct writeback_control wbc = {
-		.sync_mode = WB_SYNC_ALL,
-		.nr_to_write = 1,
-	};
+	int			delalloc, unwritten;
 
-	trace_xfs_releasepage(inode, page, 0);
+	trace_xfs_releasepage(page->mapping->host, page, 0);
 
-	if (!page_has_buffers(page))
-		return 0;
-
-	xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
-	if (!delalloc && !unwritten)
-		goto free_buffers;
+	xfs_count_page_state(page, &delalloc, &unwritten);
 
-	if (!(gfp_mask & __GFP_FS))
+	if (WARN_ON(delalloc))
 		return 0;
-
-	/* If we are already inside a transaction or the thread cannot
-	 * do I/O, we cannot release this page.
-	 */
-	if (current_test_flags(PF_FSTRANS))
+	if (WARN_ON(unwritten))
 		return 0;
 
-	/*
-	 * Convert delalloc space to real space, do not flush the
-	 * data out to disk, that will be done by the caller.
-	 * Never need to allocate space here - we will always
-	 * come back to writepage in that case.
-	 */
-	dirty = xfs_page_state_convert(inode, page, &wbc, 0, 0);
-	if (dirty == 0 && !unwritten)
-		goto free_buffers;
-	return 0;
-
-free_buffers:
 	return try_to_free_buffers(page);
 }
 
@@ -1474,9 +1297,9 @@ __xfs_get_blocks(
 	sector_t		iblock,
 	struct buffer_head	*bh_result,
 	int			create,
-	int			direct,
-	bmapi_flags_t		flags)
+	int			direct)
 {
+	int			flags = create ? BMAPI_WRITE : BMAPI_READ;
 	struct xfs_bmbt_irec	imap;
 	xfs_off_t		offset;
 	ssize_t			size;
@@ -1491,8 +1314,11 @@ __xfs_get_blocks(
 	if (!create && direct && offset >= i_size_read(inode))
 		return 0;
 
-	error = xfs_iomap(XFS_I(inode), offset, size,
-			     create ? flags : BMAPI_READ, &imap, &nimap, &new);
+	if (direct && create)
+		flags |= BMAPI_DIRECT;
+
+	error = xfs_iomap(XFS_I(inode), offset, size, flags, &imap, &nimap,
+			  &new);
 	if (error)
 		return -error;
 	if (nimap == 0)
@@ -1572,8 +1398,7 @@ xfs_get_blocks(
 	struct buffer_head	*bh_result,
 	int			create)
 {
-	return __xfs_get_blocks(inode, iblock,
-				bh_result, create, 0, BMAPI_WRITE);
+	return __xfs_get_blocks(inode, iblock, bh_result, create, 0);
 }
 
 STATIC int
@@ -1583,61 +1408,59 @@ xfs_get_blocks_direct(
 	struct buffer_head	*bh_result,
 	int			create)
 {
-	return __xfs_get_blocks(inode, iblock,
-				bh_result, create, 1, BMAPI_WRITE|BMAPI_DIRECT);
+	return __xfs_get_blocks(inode, iblock, bh_result, create, 1);
 }
 
+/*
+ * Complete a direct I/O write request.
+ *
+ * If the private argument is non-NULL __xfs_get_blocks signals us that we
+ * need to issue a transaction to convert the range from unwritten to written
+ * extents.  In case this is regular synchronous I/O we just call xfs_end_io
+ * to do this and we are done.  But in case this was a successfull AIO
+ * request this handler is called from interrupt context, from which we
+ * can't start transactions.  In that case offload the I/O completion to
+ * the workqueues we also use for buffered I/O completion.
+ */
 STATIC void
-xfs_end_io_direct(
-	struct kiocb	*iocb,
-	loff_t		offset,
-	ssize_t		size,
-	void		*private)
+xfs_end_io_direct_write(
+	struct kiocb		*iocb,
+	loff_t			offset,
+	ssize_t			size,
+	void			*private,
+	int			ret,
+	bool			is_async)
 {
-	xfs_ioend_t	*ioend = iocb->private;
+	struct xfs_ioend	*ioend = iocb->private;
 
 	/*
-	 * Non-NULL private data means we need to issue a transaction to
-	 * convert a range from unwritten to written extents.  This needs
-	 * to happen from process context but aio+dio I/O completion
-	 * happens from irq context so we need to defer it to a workqueue.
-	 * This is not necessary for synchronous direct I/O, but we do
-	 * it anyway to keep the code uniform and simpler.
-	 *
-	 * Well, if only it were that simple. Because synchronous direct I/O
-	 * requires extent conversion to occur *before* we return to userspace,
-	 * we have to wait for extent conversion to complete. Look at the
-	 * iocb that has been passed to us to determine if this is AIO or
-	 * not. If it is synchronous, tell xfs_finish_ioend() to kick the
-	 * workqueue and wait for it to complete.
-	 *
-	 * The core direct I/O code might be changed to always call the
-	 * completion handler in the future, in which case all this can
-	 * go away.
+	 * blockdev_direct_IO can return an error even after the I/O
+	 * completion handler was called.  Thus we need to protect
+	 * against double-freeing.
 	 */
+	iocb->private = NULL;
+
 	ioend->io_offset = offset;
 	ioend->io_size = size;
-	if (ioend->io_type == IO_READ) {
-		xfs_finish_ioend(ioend, 0);
-	} else if (private && size > 0) {
-		xfs_finish_ioend(ioend, is_sync_kiocb(iocb));
-	} else {
+	if (private && size > 0)
+		ioend->io_type = IO_UNWRITTEN;
+
+	if (is_async) {
 		/*
-		 * A direct I/O write ioend starts it's life in unwritten
-		 * state in case they map an unwritten extent.  This write
-		 * didn't map an unwritten extent so switch it's completion
-		 * handler.
+		 * If we are converting an unwritten extent we need to delay
+		 * the AIO completion until after the unwrittent extent
+		 * conversion has completed, otherwise do it ASAP.
 		 */
-		ioend->io_type = IO_NEW;
-		xfs_finish_ioend(ioend, 0);
+		if (ioend->io_type == IO_UNWRITTEN) {
+			ioend->io_iocb = iocb;
+			ioend->io_result = ret;
+		} else {
+			aio_complete(iocb, ret, 0);
+		}
+		xfs_finish_ioend(ioend);
+	} else {
+		xfs_finish_ioend_sync(ioend);
 	}
-
-	/*
-	 * blockdev_direct_IO can return an error even after the I/O
-	 * completion handler was called.  Thus we need to protect
-	 * against double-freeing.
-	 */
-	iocb->private = NULL;
 }
 
 STATIC ssize_t
@@ -1648,23 +1471,26 @@ xfs_vm_direct_IO(
 	loff_t			offset,
 	unsigned long		nr_segs)
 {
-	struct file	*file = iocb->ki_filp;
-	struct inode	*inode = file->f_mapping->host;
-	struct block_device *bdev;
-	ssize_t		ret;
-
-	bdev = xfs_find_bdev_for_inode(inode);
-
-	iocb->private = xfs_alloc_ioend(inode, rw == WRITE ?
-					IO_UNWRITTEN : IO_READ);
-
-	ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
-					    offset, nr_segs,
-					    xfs_get_blocks_direct,
-					    xfs_end_io_direct);
+	struct inode		*inode = iocb->ki_filp->f_mapping->host;
+	struct block_device	*bdev = xfs_find_bdev_for_inode(inode);
+	ssize_t			ret;
+
+	if (rw & WRITE) {
+		iocb->private = xfs_alloc_ioend(inode, IO_NEW);
+
+		ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+						    offset, nr_segs,
+						    xfs_get_blocks_direct,
+						    xfs_end_io_direct_write);
+		if (ret != -EIOCBQUEUED && iocb->private)
+			xfs_destroy_ioend(iocb->private);
+	} else {
+		ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+						    offset, nr_segs,
+						    xfs_get_blocks_direct,
+						    NULL);
+	}
 
-	if (unlikely(ret != -EIOCBQUEUED && iocb->private))
-		xfs_destroy_ioend(iocb->private);
 	return ret;
 }
 
@@ -1679,8 +1505,8 @@ xfs_vm_write_begin(
 	void			**fsdata)
 {
 	*pagep = NULL;
-	return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
-								xfs_get_blocks);
+	return block_write_begin(file, mapping, pos, len, flags | AOP_FLAG_NOFS,
+				 pagep, fsdata, xfs_get_blocks);
 }
 
 STATIC sector_t
@@ -1691,7 +1517,7 @@ xfs_vm_bmap(
 	struct inode		*inode = (struct inode *)mapping->host;
 	struct xfs_inode	*ip = XFS_I(inode);
 
-	xfs_itrace_entry(XFS_I(inode));
+	trace_xfs_vm_bmap(XFS_I(inode));
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 	xfs_flush_pages(ip, (xfs_off_t)0, -1, 0, FI_REMAPF);
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 4cfc6ea87df..c5057fb6237 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -37,6 +37,8 @@ typedef struct xfs_ioend {
 	size_t			io_size;	/* size of the extent */
 	xfs_off_t		io_offset;	/* offset in the file */
 	struct work_struct	io_work;	/* xfsdatad work queue */
+	struct kiocb		*io_iocb;
+	int			io_result;
 } xfs_ioend_t;
 
 extern const struct address_space_operations xfs_address_space_operations;
@@ -45,6 +47,6 @@ extern int xfs_get_blocks(struct inode *, sector_t, struct buffer_head *, int);
 extern void xfs_ioend_init(void);
 extern void xfs_ioend_wait(struct xfs_inode *);
 
-extern void xfs_count_page_state(struct page *, int *, int *, int *);
+extern void xfs_count_page_state(struct page *, int *, int *);
 
 #endif /* __XFS_AOPS_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 649ade8ef59..ea79072f521 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -39,13 +39,12 @@
 #include "xfs_inum.h"
 #include "xfs_log.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trace.h"
 
 static kmem_zone_t *xfs_buf_zone;
 STATIC int xfsbufd(void *);
-STATIC int xfsbufd_wakeup(int, gfp_t);
+STATIC int xfsbufd_wakeup(struct shrinker *, int, gfp_t);
 STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
 static struct shrinker xfs_buf_shake = {
 	.shrink = xfsbufd_wakeup,
@@ -340,7 +339,7 @@ _xfs_buf_lookup_pages(
 					__func__, gfp_mask);
 
 			XFS_STATS_INC(xb_page_retries);
-			xfsbufd_wakeup(0, gfp_mask);
+			xfsbufd_wakeup(NULL, 0, gfp_mask);
 			congestion_wait(BLK_RW_ASYNC, HZ/50);
 			goto retry;
 		}
@@ -579,9 +578,9 @@ _xfs_buf_read(
 			XBF_READ_AHEAD | _XBF_RUN_QUEUES);
 
 	status = xfs_buf_iorequest(bp);
-	if (!status && !(flags & XBF_ASYNC))
-		status = xfs_buf_iowait(bp);
-	return status;
+	if (status || XFS_BUF_ISERROR(bp) || (flags & XBF_ASYNC))
+		return status;
+	return xfs_buf_iowait(bp);
 }
 
 xfs_buf_t *
@@ -897,36 +896,6 @@ xfs_buf_unlock(
 	trace_xfs_buf_unlock(bp, _RET_IP_);
 }
 
-
-/*
- *	Pinning Buffer Storage in Memory
- *	Ensure that no attempt to force a buffer to disk will succeed.
- */
-void
-xfs_buf_pin(
-	xfs_buf_t		*bp)
-{
-	trace_xfs_buf_pin(bp, _RET_IP_);
-	atomic_inc(&bp->b_pin_count);
-}
-
-void
-xfs_buf_unpin(
-	xfs_buf_t		*bp)
-{
-	trace_xfs_buf_unpin(bp, _RET_IP_);
-
-	if (atomic_dec_and_test(&bp->b_pin_count))
-		wake_up_all(&bp->b_waiters);
-}
-
-int
-xfs_buf_ispin(
-	xfs_buf_t		*bp)
-{
-	return atomic_read(&bp->b_pin_count);
-}
-
 STATIC void
 xfs_buf_wait_unpin(
 	xfs_buf_t		*bp)
@@ -1018,13 +987,12 @@ xfs_bwrite(
 {
 	int			error;
 
-	bp->b_strat = xfs_bdstrat_cb;
 	bp->b_mount = mp;
 	bp->b_flags |= XBF_WRITE;
 	bp->b_flags &= ~(XBF_ASYNC | XBF_READ);
 
 	xfs_buf_delwri_dequeue(bp);
-	xfs_buf_iostrategy(bp);
+	xfs_bdstrat_cb(bp);
 
 	error = xfs_buf_iowait(bp);
 	if (error)
@@ -1040,7 +1008,6 @@ xfs_bdwrite(
 {
 	trace_xfs_buf_bdwrite(bp, _RET_IP_);
 
-	bp->b_strat = xfs_bdstrat_cb;
 	bp->b_mount = mp;
 
 	bp->b_flags &= ~XBF_READ;
@@ -1075,7 +1042,6 @@ xfs_bioerror(
 	XFS_BUF_UNDONE(bp);
 	XFS_BUF_STALE(bp);
 
-	XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 	xfs_biodone(bp);
 
 	return EIO;
@@ -1105,7 +1071,6 @@ xfs_bioerror_relse(
 	XFS_BUF_DONE(bp);
 	XFS_BUF_STALE(bp);
 	XFS_BUF_CLR_IODONE_FUNC(bp);
-	XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 	if (!(fl & XBF_ASYNC)) {
 		/*
 		 * Mark b_error and B_ERROR _both_.
@@ -1311,8 +1276,19 @@ submit_io:
 		if (size)
 			goto next_chunk;
 	} else {
-		bio_put(bio);
+		/*
+		 * if we get here, no pages were added to the bio. However,
+		 * we can't just error out here - if the pages are locked then
+		 * we have to unlock them otherwise we can hang on a later
+		 * access to the page.
+		 */
 		xfs_buf_ioerror(bp, EIO);
+		if (bp->b_flags & _XBF_PAGE_LOCKED) {
+			int i;
+			for (i = 0; i < bp->b_page_count; i++)
+				unlock_page(bp->b_pages[i]);
+		}
+		bio_put(bio);
 	}
 }
 
@@ -1762,6 +1738,7 @@ xfs_buf_runall_queues(
 
 STATIC int
 xfsbufd_wakeup(
+	struct shrinker		*shrink,
 	int			priority,
 	gfp_t			mask)
 {
@@ -1803,7 +1780,7 @@ xfs_buf_delwri_split(
 		trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		ASSERT(bp->b_flags & XBF_DELWRI);
 
-		if (!xfs_buf_ispin(bp) && !xfs_buf_cond_lock(bp)) {
+		if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
 			if (!force &&
 			    time_before(jiffies, bp->b_queuetime + age)) {
 				xfs_buf_unlock(bp);
@@ -1888,7 +1865,7 @@ xfsbufd(
 			struct xfs_buf *bp;
 			bp = list_first_entry(&tmp, struct xfs_buf, b_list);
 			list_del_init(&bp->b_list);
-			xfs_buf_iostrategy(bp);
+			xfs_bdstrat_cb(bp);
 			count++;
 		}
 		if (count)
@@ -1935,7 +1912,7 @@ xfs_flush_buftarg(
 			bp->b_flags &= ~XBF_ASYNC;
 			list_add(&bp->b_list, &wait_list);
 		}
-		xfs_buf_iostrategy(bp);
+		xfs_bdstrat_cb(bp);
 	}
 
 	if (wait) {
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 5fbecefa5df..d072e5ff923 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -44,57 +44,57 @@ typedef enum {
 	XBRW_ZERO = 3,			/* Zero target memory */
 } xfs_buf_rw_t;
 
-typedef enum {
-	XBF_READ = (1 << 0),	/* buffer intended for reading from device */
-	XBF_WRITE = (1 << 1),	/* buffer intended for writing to device   */
-	XBF_MAPPED = (1 << 2),  /* buffer mapped (b_addr valid)            */
-	XBF_ASYNC = (1 << 4),   /* initiator will not wait for completion  */
-	XBF_DONE = (1 << 5),    /* all pages in the buffer uptodate	   */
-	XBF_DELWRI = (1 << 6),  /* buffer has dirty pages                  */
-	XBF_STALE = (1 << 7),	/* buffer has been staled, do not find it  */
-	XBF_FS_MANAGED = (1 << 8),  /* filesystem controls freeing memory  */
- 	XBF_ORDERED = (1 << 11),    /* use ordered writes		   */
-	XBF_READ_AHEAD = (1 << 12), /* asynchronous read-ahead		   */
-	XBF_LOG_BUFFER = (1 << 13), /* this is a buffer used for the log   */
-
-	/* flags used only as arguments to access routines */
-	XBF_LOCK = (1 << 14),       /* lock requested			   */
-	XBF_TRYLOCK = (1 << 15),    /* lock requested, but do not wait	   */
-	XBF_DONT_BLOCK = (1 << 16), /* do not block in current thread	   */
-
-	/* flags used only internally */
-	_XBF_PAGE_CACHE = (1 << 17),/* backed by pagecache		   */
-	_XBF_PAGES = (1 << 18),	    /* backed by refcounted pages	   */
-	_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue	   */
-	_XBF_DELWRI_Q = (1 << 21),   /* buffer on delwri queue		   */
-
-	/*
-	 * Special flag for supporting metadata blocks smaller than a FSB.
-	 *
-	 * In this case we can have multiple xfs_buf_t on a single page and
-	 * need to lock out concurrent xfs_buf_t readers as they only
-	 * serialise access to the buffer.
-	 *
-	 * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
-	 * between reads of the page. Hence we can have one thread read the
-	 * page and modify it, but then race with another thread that thinks
-	 * the page is not up-to-date and hence reads it again.
-	 *
-	 * The result is that the first modifcation to the page is lost.
-	 * This sort of AGF/AGI reading race can happen when unlinking inodes
-	 * that require truncation and results in the AGI unlinked list
-	 * modifications being lost.
-	 */
-	_XBF_PAGE_LOCKED = (1 << 22),
-
-	/*
-	 * If we try a barrier write, but it fails we have to communicate
-	 * this to the upper layers.  Unfortunately b_error gets overwritten
-	 * when the buffer is re-issued so we have to add another flag to
-	 * keep this information.
-	 */
-	_XFS_BARRIER_FAILED = (1 << 23),
-} xfs_buf_flags_t;
+#define XBF_READ	(1 << 0) /* buffer intended for reading from device */
+#define XBF_WRITE	(1 << 1) /* buffer intended for writing to device */
+#define XBF_MAPPED	(1 << 2) /* buffer mapped (b_addr valid) */
+#define XBF_ASYNC	(1 << 4) /* initiator will not wait for completion */
+#define XBF_DONE	(1 << 5) /* all pages in the buffer uptodate */
+#define XBF_DELWRI	(1 << 6) /* buffer has dirty pages */
+#define XBF_STALE	(1 << 7) /* buffer has been staled, do not find it */
+#define XBF_FS_MANAGED	(1 << 8) /* filesystem controls freeing memory */
+#define XBF_ORDERED	(1 << 11)/* use ordered writes */
+#define XBF_READ_AHEAD	(1 << 12)/* asynchronous read-ahead */
+#define XBF_LOG_BUFFER	(1 << 13)/* this is a buffer used for the log */
+
+/* flags used only as arguments to access routines */
+#define XBF_LOCK	(1 << 14)/* lock requested */
+#define XBF_TRYLOCK	(1 << 15)/* lock requested, but do not wait */
+#define XBF_DONT_BLOCK	(1 << 16)/* do not block in current thread */
+
+/* flags used only internally */
+#define _XBF_PAGE_CACHE	(1 << 17)/* backed by pagecache */
+#define _XBF_PAGES	(1 << 18)/* backed by refcounted pages */
+#define	_XBF_RUN_QUEUES	(1 << 19)/* run block device task queue	*/
+#define _XBF_DELWRI_Q	(1 << 21)/* buffer on delwri queue */
+
+/*
+ * Special flag for supporting metadata blocks smaller than a FSB.
+ *
+ * In this case we can have multiple xfs_buf_t on a single page and
+ * need to lock out concurrent xfs_buf_t readers as they only
+ * serialise access to the buffer.
+ *
+ * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+ * between reads of the page. Hence we can have one thread read the
+ * page and modify it, but then race with another thread that thinks
+ * the page is not up-to-date and hence reads it again.
+ *
+ * The result is that the first modifcation to the page is lost.
+ * This sort of AGF/AGI reading race can happen when unlinking inodes
+ * that require truncation and results in the AGI unlinked list
+ * modifications being lost.
+ */
+#define _XBF_PAGE_LOCKED	(1 << 22)
+
+/*
+ * If we try a barrier write, but it fails we have to communicate
+ * this to the upper layers.  Unfortunately b_error gets overwritten
+ * when the buffer is re-issued so we have to add another flag to
+ * keep this information.
+ */
+#define _XFS_BARRIER_FAILED	(1 << 23)
+
+typedef unsigned int xfs_buf_flags_t;
 
 #define XFS_BUF_FLAGS \
 	{ XBF_READ,		"READ" }, \
@@ -187,7 +187,6 @@ typedef struct xfs_buf {
 	atomic_t		b_io_remaining;	/* #outstanding I/O requests */
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	xfs_buf_relse_t		b_relse;	/* releasing function */
-	xfs_buf_bdstrat_t	b_strat;	/* pre-write function */
 	struct completion	b_iowait;	/* queue for I/O waiters */
 	void			*b_fspriv;
 	void			*b_fspriv2;
@@ -245,11 +244,6 @@ extern int xfs_buf_iowait(xfs_buf_t *);
 extern void xfs_buf_iomove(xfs_buf_t *, size_t, size_t, void *,
 				xfs_buf_rw_t);
 
-static inline int xfs_buf_iostrategy(xfs_buf_t *bp)
-{
-	return bp->b_strat ? bp->b_strat(bp) : xfs_buf_iorequest(bp);
-}
-
 static inline int xfs_buf_geterror(xfs_buf_t *bp)
 {
 	return bp ? bp->b_error : ENOMEM;
@@ -258,11 +252,6 @@ static inline int xfs_buf_geterror(xfs_buf_t *bp)
 /* Buffer Utility Routines */
 extern xfs_caddr_t xfs_buf_offset(xfs_buf_t *, size_t);
 
-/* Pinning Buffer Storage in Memory */
-extern void xfs_buf_pin(xfs_buf_t *);
-extern void xfs_buf_unpin(xfs_buf_t *);
-extern int xfs_buf_ispin(xfs_buf_t *);
-
 /* Delayed Write Buffer Routines */
 extern void xfs_buf_delwri_dequeue(xfs_buf_t *);
 extern void xfs_buf_delwri_promote(xfs_buf_t *);
@@ -326,8 +315,6 @@ extern void xfs_buf_terminate(void);
 #define XFS_BUF_IODONE_FUNC(bp)			((bp)->b_iodone)
 #define XFS_BUF_SET_IODONE_FUNC(bp, func)	((bp)->b_iodone = (func))
 #define XFS_BUF_CLR_IODONE_FUNC(bp)		((bp)->b_iodone = NULL)
-#define XFS_BUF_SET_BDSTRAT_FUNC(bp, func)	((bp)->b_strat = (func))
-#define XFS_BUF_CLR_BDSTRAT_FUNC(bp)		((bp)->b_strat = NULL)
 
 #define XFS_BUF_FSPRIVATE(bp, type)		((type)(bp)->b_fspriv)
 #define XFS_BUF_SET_FSPRIVATE(bp, val)		((bp)->b_fspriv = (void*)(val))
@@ -351,7 +338,7 @@ extern void xfs_buf_terminate(void);
 #define XFS_BUF_SET_VTYPE(bp, type)		do { } while (0)
 #define XFS_BUF_SET_REF(bp, ref)		do { } while (0)
 
-#define XFS_BUF_ISPINNED(bp)	xfs_buf_ispin(bp)
+#define XFS_BUF_ISPINNED(bp)	atomic_read(&((bp)->b_pin_count))
 
 #define XFS_BUF_VALUSEMA(bp)	xfs_buf_lock_value(bp)
 #define XFS_BUF_CPSEMA(bp)	(xfs_buf_cond_lock(bp) == 0)
@@ -370,8 +357,6 @@ static inline void xfs_buf_relse(xfs_buf_t *bp)
 	xfs_buf_rele(bp);
 }
 
-#define xfs_bpin(bp)		xfs_buf_pin(bp)
-#define xfs_bunpin(bp)		xfs_buf_unpin(bp)
 #define xfs_biodone(bp)		xfs_buf_ioend(bp, 0)
 
 #define xfs_biomove(bp, off, len, data, rw) \
diff --git a/fs/xfs/linux-2.6/xfs_dmapi_priv.h b/fs/xfs/linux-2.6/xfs_dmapi_priv.h
deleted file mode 100644
index a8b0b1685ee..00000000000
--- a/fs/xfs/linux-2.6/xfs_dmapi_priv.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2000-2006 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_DMAPI_PRIV_H__
-#define __XFS_DMAPI_PRIV_H__
-
-/*
- *	Based on IO_ISDIRECT, decide which i_ flag is set.
- */
-#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
-			      DM_FLAGS_IMUX : 0)
-#define DM_SEM_FLAG_WR	(DM_FLAGS_IALLOCSEM_WR | DM_FLAGS_IMUX)
-
-#endif /*__XFS_DMAPI_PRIV_H__*/
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 846b75aeb2a..3764d74790e 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -23,13 +23,13 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_export.h"
 #include "xfs_vnodeops.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
+#include "xfs_trace.h"
 
 /*
  * Note that we only accept fileids which are long enough rather than allow
@@ -128,13 +128,11 @@ xfs_nfs_get_inode(
 		return ERR_PTR(-ESTALE);
 
 	/*
-	 * The XFS_IGET_BULKSTAT means that an invalid inode number is just
-	 * fine and not an indication of a corrupted filesystem.  Because
-	 * clients can send any kind of invalid file handle, e.g. after
-	 * a restore on the server we have to deal with this case gracefully.
+	 * The XFS_IGET_UNTRUSTED means that an invalid inode number is just
+	 * fine and not an indication of a corrupted filesystem as clients can
+	 * send invalid file handles and we have to handle it gracefully..
 	 */
-	error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
-			 XFS_ILOCK_SHARED, &ip, 0);
+	error = xfs_iget(mp, NULL, ino, XFS_IGET_UNTRUSTED, 0, &ip);
 	if (error) {
 		/*
 		 * EINVAL means the inode cluster doesn't exist anymore.
@@ -149,11 +147,10 @@ xfs_nfs_get_inode(
 	}
 
 	if (ip->i_d.di_gen != generation) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
+		IRELE(ip);
 		return ERR_PTR(-ENOENT);
 	}
 
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 	return VFS_I(ip);
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 257a56b127c..ba8ad422a16 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -22,23 +22,15 @@
 #include "xfs_inum.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_trans.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 #include "xfs_da_btree.h"
 #include "xfs_ioctl.h"
@@ -108,7 +100,7 @@ xfs_file_fsync(
 	int			error = 0;
 	int			log_flushed = 0;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_fsync(ip);
 
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
 		return -XFS_ERROR(EIO);
@@ -166,8 +158,7 @@ xfs_file_fsync(
 		 * transaction.	 So we play it safe and fire off the
 		 * transaction anyway.
 		 */
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 		xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 		xfs_trans_set_sync(tp);
 		error = _xfs_trans_commit(tp, 0, &log_flushed);
@@ -275,20 +266,6 @@ xfs_file_aio_read(
 		mutex_lock(&inode->i_mutex);
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
-		int dmflags = FILP_DELAY_FLAG(file) | DM_SEM_FLAG_RD(ioflags);
-		int iolock = XFS_IOLOCK_SHARED;
-
-		ret = -XFS_SEND_DATA(mp, DM_EVENT_READ, ip, iocb->ki_pos, size,
-					dmflags, &iolock);
-		if (ret) {
-			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-			if (unlikely(ioflags & IO_ISDIRECT))
-				mutex_unlock(&inode->i_mutex);
-			return ret;
-		}
-	}
-
 	if (unlikely(ioflags & IO_ISDIRECT)) {
 		if (inode->i_mapping->nrpages) {
 			ret = -xfs_flushinval_pages(ip,
@@ -321,7 +298,6 @@ xfs_file_splice_read(
 	unsigned int		flags)
 {
 	struct xfs_inode	*ip = XFS_I(infilp->f_mapping->host);
-	struct xfs_mount	*mp = ip->i_mount;
 	int			ioflags = 0;
 	ssize_t			ret;
 
@@ -335,18 +311,6 @@ xfs_file_splice_read(
 
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
-		int iolock = XFS_IOLOCK_SHARED;
-		int error;
-
-		error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, *ppos, count,
-					FILP_DELAY_FLAG(infilp), &iolock);
-		if (error) {
-			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-			return -error;
-		}
-	}
-
 	trace_xfs_file_splice_read(ip, count, *ppos, ioflags);
 
 	ret = generic_file_splice_read(infilp, ppos, pipe, count, flags);
@@ -367,7 +331,6 @@ xfs_file_splice_write(
 {
 	struct inode		*inode = outfilp->f_mapping->host;
 	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_mount	*mp = ip->i_mount;
 	xfs_fsize_t		isize, new_size;
 	int			ioflags = 0;
 	ssize_t			ret;
@@ -382,18 +345,6 @@ xfs_file_splice_write(
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_WRITE) && !(ioflags & IO_INVIS)) {
-		int iolock = XFS_IOLOCK_EXCL;
-		int error;
-
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, *ppos, count,
-					FILP_DELAY_FLAG(outfilp), &iolock);
-		if (error) {
-			xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-			return -error;
-		}
-	}
-
 	new_size = *ppos + count;
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -463,7 +414,7 @@ xfs_zero_last_block(
 	last_fsb = XFS_B_TO_FSBT(mp, isize);
 	nimaps = 1;
 	error = xfs_bmapi(NULL, ip, last_fsb, 1, 0, NULL, 0, &imap,
-			  &nimaps, NULL, NULL);
+			  &nimaps, NULL);
 	if (error) {
 		return error;
 	}
@@ -558,7 +509,7 @@ xfs_zero_eof(
 		nimaps = 1;
 		zero_count_fsb = end_zero_fsb - start_zero_fsb + 1;
 		error = xfs_bmapi(NULL, ip, start_zero_fsb, zero_count_fsb,
-				  0, NULL, 0, &imap, &nimaps, NULL, NULL);
+				  0, NULL, 0, &imap, &nimaps, NULL);
 		if (error) {
 			ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
 			return error;
@@ -627,7 +578,6 @@ xfs_file_aio_write(
 	int			ioflags = 0;
 	xfs_fsize_t		isize, new_size;
 	int			iolock;
-	int			eventsent = 0;
 	size_t			ocount = 0, count;
 	int			need_i_mutex;
 
@@ -673,33 +623,6 @@ start:
 		goto out_unlock_mutex;
 	}
 
-	if ((DM_EVENT_ENABLED(ip, DM_EVENT_WRITE) &&
-	    !(ioflags & IO_INVIS) && !eventsent)) {
-		int		dmflags = FILP_DELAY_FLAG(file);
-
-		if (need_i_mutex)
-			dmflags |= DM_FLAGS_IMUX;
-
-		xfs_iunlock(ip, XFS_ILOCK_EXCL);
-		error = XFS_SEND_DATA(ip->i_mount, DM_EVENT_WRITE, ip,
-				      pos, count, dmflags, &iolock);
-		if (error) {
-			goto out_unlock_internal;
-		}
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		eventsent = 1;
-
-		/*
-		 * The iolock was dropped and reacquired in XFS_SEND_DATA
-		 * so we have to recheck the size when appending.
-		 * We will only "goto start;" once, since having sent the
-		 * event prevents another call to XFS_SEND_DATA, which is
-		 * what allows the size to change in the first place.
-		 */
-		if ((file->f_flags & O_APPEND) && pos != ip->i_size)
-			goto start;
-	}
-
 	if (ioflags & IO_ISDIRECT) {
 		xfs_buftarg_t	*target =
 			XFS_IS_REALTIME_INODE(ip) ?
@@ -830,22 +753,6 @@ write_retry:
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
 	}
 
-	if (ret == -ENOSPC &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE) && !(ioflags & IO_INVIS)) {
-		xfs_iunlock(ip, iolock);
-		if (need_i_mutex)
-			mutex_unlock(&inode->i_mutex);
-		error = XFS_SEND_NAMESP(ip->i_mount, DM_EVENT_NOSPACE, ip,
-				DM_RIGHT_NULL, ip, DM_RIGHT_NULL, NULL, NULL,
-				0, 0, 0); /* Delay flag intentionally  unused */
-		if (need_i_mutex)
-			mutex_lock(&inode->i_mutex);
-		xfs_ilock(ip, iolock);
-		if (error)
-			goto out_unlock_internal;
-		goto start;
-	}
-
 	error = -ret;
 	if (ret <= 0)
 		goto out_unlock_internal;
@@ -1014,9 +921,6 @@ const struct file_operations xfs_file_operations = {
 	.open		= xfs_file_open,
 	.release	= xfs_file_release,
 	.fsync		= xfs_file_fsync,
-#ifdef HAVE_FOP_OPEN_EXEC
-	.open_exec	= xfs_file_open_exec,
-#endif
 };
 
 const struct file_operations xfs_dir_file_operations = {
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index b6918d76bc7..1f279b012f9 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -21,10 +21,6 @@
 #include "xfs_inode.h"
 #include "xfs_trace.h"
 
-int  fs_noerr(void) { return 0; }
-int  fs_nosys(void) { return ENOSYS; }
-void fs_noval(void) { return; }
-
 /*
  * note: all filemap functions return negative error codes. These
  * need to be inverted before returning to the xfs core functions.
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.h b/fs/xfs/linux-2.6/xfs_fs_subr.h
deleted file mode 100644
index 82bb19b2599..00000000000
--- a/fs/xfs/linux-2.6/xfs_fs_subr.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2000,2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef	__XFS_FS_SUBR_H__
-#define __XFS_FS_SUBR_H__
-
-extern int  fs_noerr(void);
-extern int  fs_nosys(void);
-extern void fs_noval(void);
-
-#endif	/* __XFS_FS_SUBR_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 699b60cbab9..237f5ffb2ee 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -23,24 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ioctl.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_itable.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
 #include "xfs_buf_item.h"
@@ -679,10 +670,9 @@ xfs_ioc_bulkstat(
 		error = xfs_bulkstat_single(mp, &inlast,
 						bulkreq.ubuffer, &done);
 	else	/* XFS_IOC_FSBULKSTAT */
-		error = xfs_bulkstat(mp, &inlast, &count,
-			(bulkstat_one_pf)xfs_bulkstat_one, NULL,
-			sizeof(xfs_bstat_t), bulkreq.ubuffer,
-			BULKSTAT_FG_QUICK, &done);
+		error = xfs_bulkstat(mp, &inlast, &count, xfs_bulkstat_one,
+				     sizeof(xfs_bstat_t), bulkreq.ubuffer,
+				     &done);
 
 	if (error)
 		return -error;
@@ -909,7 +899,7 @@ xfs_ioctl_setattr(
 	struct xfs_dquot	*olddquot = NULL;
 	int			code;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_ioctl_setattr(ip);
 
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
@@ -1044,8 +1034,7 @@ xfs_ioctl_setattr(
 		}
 	}
 
-	xfs_trans_ijoin(tp, ip, lock_flags);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	/*
 	 * Change file ownership.  Must be the owner or privileged.
@@ -1117,16 +1106,7 @@ xfs_ioctl_setattr(
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
 
-	if (code)
-		return code;
-
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0,
-				(mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0);
-	}
-
-	return 0;
+	return code;
 
  error_return:
 	xfs_qm_dqrele(udqp);
@@ -1302,7 +1282,7 @@ xfs_file_ioctl(
 	if (filp->f_mode & FMODE_NOCMTIME)
 		ioflags |= IO_INVIS;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_ioctl(ip);
 
 	switch (cmd) {
 	case XFS_IOC_ALLOCSP:
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 9287135e9bf..6c83f7f62dc 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -28,12 +28,8 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_vnode.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -237,15 +233,12 @@ xfs_bulkstat_one_compat(
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* buffer to place output in */
 	int		ubsize,		/* size of buffer */
-	void		*private_data,	/* my private data */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
 	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
 	int		*stat)		/* BULKSTAT_RV_... */
 {
 	return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
-				    xfs_bulkstat_one_fmt_compat, bno,
-				    ubused, dibuff, stat);
+				    xfs_bulkstat_one_fmt_compat,
+				    ubused, stat);
 }
 
 /* copied from xfs_ioctl.c */
@@ -298,13 +291,11 @@ xfs_compat_ioc_bulkstat(
 		int res;
 
 		error = xfs_bulkstat_one_compat(mp, inlast, bulkreq.ubuffer,
-				sizeof(compat_xfs_bstat_t),
-				NULL, 0, NULL, NULL, &res);
+				sizeof(compat_xfs_bstat_t), 0, &res);
 	} else if (cmd == XFS_IOC_FSBULKSTAT_32) {
 		error = xfs_bulkstat(mp, &inlast, &count,
-			xfs_bulkstat_one_compat, NULL,
-			sizeof(compat_xfs_bstat_t), bulkreq.ubuffer,
-			BULKSTAT_FG_QUICK, &done);
+			xfs_bulkstat_one_compat, sizeof(compat_xfs_bstat_t),
+			bulkreq.ubuffer, &done);
 	} else
 		error = XFS_ERROR(EINVAL);
 	if (error)
@@ -549,7 +540,7 @@ xfs_file_compat_ioctl(
 	if (filp->f_mode & FMODE_NOCMTIME)
 		ioflags |= IO_INVIS;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_compat_ioctl(ip);
 
 	switch (cmd) {
 	/* No size or alignment issues on any arch */
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 9c8019c78c9..536b81e63a3 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -24,21 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
@@ -496,7 +488,7 @@ xfs_vn_getattr(
 	struct xfs_inode	*ip = XFS_I(inode);
 	struct xfs_mount	*mp = ip->i_mount;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_getattr(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -585,11 +577,20 @@ xfs_vn_fallocate(
 	bf.l_len = len;
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
+
+	/* check the new inode size is valid before allocating */
+	if (!(mode & FALLOC_FL_KEEP_SIZE) &&
+	    offset + len > i_size_read(inode)) {
+		new_size = offset + len;
+		error = inode_newsize_ok(inode, new_size);
+		if (error)
+			goto out_unlock;
+	}
+
 	error = -xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf,
 				       0, XFS_ATTR_NOLOCK);
-	if (!error && !(mode & FALLOC_FL_KEEP_SIZE) &&
-	    offset + len > i_size_read(inode))
-		new_size = offset + len;
+	if (error)
+		goto out_unlock;
 
 	/* Change file size if needed */
 	if (new_size) {
@@ -600,6 +601,7 @@ xfs_vn_fallocate(
 		error = -xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK);
 	}
 
+out_unlock:
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
 out_error:
 	return error;
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index facfb323a70..998a9d7fb9c 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -87,7 +87,6 @@
 #include <xfs_aops.h>
 #include <xfs_super.h>
 #include <xfs_globals.h>
-#include <xfs_fs_subr.h>
 #include <xfs_buf.h>
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index 9ac8aea9152..bfd5ac9d1f6 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -16,14 +16,12 @@
  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include "xfs.h"
-#include "xfs_dmapi.h"
 #include "xfs_sb.h"
 #include "xfs_inum.h"
 #include "xfs_log.h"
 #include "xfs_ag.h"
 #include "xfs_mount.h"
 #include "xfs_quota.h"
-#include "xfs_log.h"
 #include "xfs_trans.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inode.h"
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index f2d1718c916..758df94690e 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -25,14 +25,11 @@
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -43,7 +40,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_fsops.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -94,7 +90,6 @@ mempool_t *xfs_ioend_pool;
 #define MNTOPT_BARRIER	"barrier"	/* use writer barriers for log write and
 					 * unwritten extent conversion */
 #define MNTOPT_NOBARRIER "nobarrier"	/* .. disable */
-#define MNTOPT_OSYNCISOSYNC "osyncisosync" /* o_sync is REALLY o_sync */
 #define MNTOPT_64BITINODE   "inode64"	/* inodes can be allocated anywhere */
 #define MNTOPT_IKEEP	"ikeep"		/* do not free empty inode clusters */
 #define MNTOPT_NOIKEEP	"noikeep"	/* free empty inode clusters */
@@ -116,9 +111,6 @@ mempool_t *xfs_ioend_pool;
 #define MNTOPT_GQUOTANOENF "gqnoenforce"/* group quota limit enforcement */
 #define MNTOPT_PQUOTANOENF "pqnoenforce"/* project quota limit enforcement */
 #define MNTOPT_QUOTANOENF  "qnoenforce"	/* same as uqnoenforce */
-#define MNTOPT_DMAPI	"dmapi"		/* DMI enabled (DMAPI / XDSM) */
-#define MNTOPT_XDSM	"xdsm"		/* DMI enabled (DMAPI / XDSM) */
-#define MNTOPT_DMI	"dmi"		/* DMI enabled (DMAPI / XDSM) */
 #define MNTOPT_DELAYLOG   "delaylog"	/* Delayed loging enabled */
 #define MNTOPT_NODELAYLOG "nodelaylog"	/* Delayed loging disabled */
 
@@ -172,15 +164,13 @@ suffix_strtoul(char *s, char **endp, unsigned int base)
 STATIC int
 xfs_parseargs(
 	struct xfs_mount	*mp,
-	char			*options,
-	char			**mtpt)
+	char			*options)
 {
 	struct super_block	*sb = mp->m_super;
 	char			*this_char, *value, *eov;
 	int			dsunit = 0;
 	int			dswidth = 0;
 	int			iosize = 0;
-	int			dmapi_implies_ikeep = 1;
 	__uint8_t		iosizelog = 0;
 
 	/*
@@ -243,15 +233,10 @@ xfs_parseargs(
 			if (!mp->m_logname)
 				return ENOMEM;
 		} else if (!strcmp(this_char, MNTOPT_MTPT)) {
-			if (!value || !*value) {
-				cmn_err(CE_WARN,
-					"XFS: %s option requires an argument",
-					this_char);
-				return EINVAL;
-			}
-			*mtpt = kstrndup(value, MAXNAMELEN, GFP_KERNEL);
-			if (!*mtpt)
-				return ENOMEM;
+			cmn_err(CE_WARN,
+				"XFS: %s option not allowed on this system",
+				this_char);
+			return EINVAL;
 		} else if (!strcmp(this_char, MNTOPT_RTDEV)) {
 			if (!value || !*value) {
 				cmn_err(CE_WARN,
@@ -288,8 +273,6 @@ xfs_parseargs(
 			mp->m_flags &= ~XFS_MOUNT_GRPID;
 		} else if (!strcmp(this_char, MNTOPT_WSYNC)) {
 			mp->m_flags |= XFS_MOUNT_WSYNC;
-		} else if (!strcmp(this_char, MNTOPT_OSYNCISOSYNC)) {
-			mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
 		} else if (!strcmp(this_char, MNTOPT_NORECOVERY)) {
 			mp->m_flags |= XFS_MOUNT_NORECOVERY;
 		} else if (!strcmp(this_char, MNTOPT_NOALIGN)) {
@@ -329,7 +312,6 @@ xfs_parseargs(
 		} else if (!strcmp(this_char, MNTOPT_IKEEP)) {
 			mp->m_flags |= XFS_MOUNT_IKEEP;
 		} else if (!strcmp(this_char, MNTOPT_NOIKEEP)) {
-			dmapi_implies_ikeep = 0;
 			mp->m_flags &= ~XFS_MOUNT_IKEEP;
 		} else if (!strcmp(this_char, MNTOPT_LARGEIO)) {
 			mp->m_flags &= ~XFS_MOUNT_COMPAT_IOSIZE;
@@ -370,12 +352,6 @@ xfs_parseargs(
 		} else if (!strcmp(this_char, MNTOPT_GQUOTANOENF)) {
 			mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
 			mp->m_qflags &= ~XFS_OQUOTA_ENFD;
-		} else if (!strcmp(this_char, MNTOPT_DMAPI)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
-		} else if (!strcmp(this_char, MNTOPT_XDSM)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
-		} else if (!strcmp(this_char, MNTOPT_DMI)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
 		} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
 			mp->m_flags |= XFS_MOUNT_DELAYLOG;
 			cmn_err(CE_WARN,
@@ -387,9 +363,11 @@ xfs_parseargs(
 			cmn_err(CE_WARN,
 	"XFS: ihashsize no longer used, option is deprecated.");
 		} else if (!strcmp(this_char, "osyncisdsync")) {
-			/* no-op, this is now the default */
 			cmn_err(CE_WARN,
-	"XFS: osyncisdsync is now the default, option is deprecated.");
+	"XFS: osyncisdsync has no effect, option is deprecated.");
+		} else if (!strcmp(this_char, "osyncisosync")) {
+			cmn_err(CE_WARN,
+	"XFS: osyncisosync has no effect, option is deprecated.");
 		} else if (!strcmp(this_char, "irixsgid")) {
 			cmn_err(CE_WARN,
 	"XFS: irixsgid is now a sysctl(2) variable, option is deprecated.");
@@ -430,12 +408,6 @@ xfs_parseargs(
 		return EINVAL;
 	}
 
-	if ((mp->m_flags & XFS_MOUNT_DMAPI) && (!*mtpt || *mtpt[0] == '\0')) {
-		printk("XFS: %s option needs the mount point option as well\n",
-			MNTOPT_DMAPI);
-		return EINVAL;
-	}
-
 	if ((dsunit && !dswidth) || (!dsunit && dswidth)) {
 		cmn_err(CE_WARN,
 			"XFS: sunit and swidth must be specified together");
@@ -449,18 +421,6 @@ xfs_parseargs(
 		return EINVAL;
 	}
 
-	/*
-	 * Applications using DMI filesystems often expect the
-	 * inode generation number to be monotonically increasing.
-	 * If we delete inode chunks we break this assumption, so
-	 * keep unused inode chunks on disk for DMI filesystems
-	 * until we come up with a better solution.
-	 * Note that if "ikeep" or "noikeep" mount options are
-	 * supplied, then they are honored.
-	 */
-	if ((mp->m_flags & XFS_MOUNT_DMAPI) && dmapi_implies_ikeep)
-		mp->m_flags |= XFS_MOUNT_IKEEP;
-
 done:
 	if (!(mp->m_flags & XFS_MOUNT_NOALIGN)) {
 		/*
@@ -539,10 +499,8 @@ xfs_showargs(
 		{ XFS_MOUNT_SWALLOC,		"," MNTOPT_SWALLOC },
 		{ XFS_MOUNT_NOUUID,		"," MNTOPT_NOUUID },
 		{ XFS_MOUNT_NORECOVERY,		"," MNTOPT_NORECOVERY },
-		{ XFS_MOUNT_OSYNCISOSYNC,	"," MNTOPT_OSYNCISOSYNC },
 		{ XFS_MOUNT_ATTR2,		"," MNTOPT_ATTR2 },
 		{ XFS_MOUNT_FILESTREAMS,	"," MNTOPT_FILESTREAM },
-		{ XFS_MOUNT_DMAPI,		"," MNTOPT_DMAPI },
 		{ XFS_MOUNT_GRPID,		"," MNTOPT_GRPID },
 		{ XFS_MOUNT_DELAYLOG,		"," MNTOPT_DELAYLOG },
 		{ 0, NULL }
@@ -947,7 +905,7 @@ xfs_fs_destroy_inode(
 {
 	struct xfs_inode	*ip = XFS_I(inode);
 
-	xfs_itrace_entry(ip);
+	trace_xfs_destroy_inode(ip);
 
 	XFS_STATS_INC(vn_reclaim);
 
@@ -1063,10 +1021,8 @@ xfs_log_inode(
 	 * an inode in another recent transaction.  So we play it safe and
 	 * fire off the transaction anyway.
 	 */
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	xfs_trans_set_sync(tp);
 	error = xfs_trans_commit(tp, 0);
 	xfs_ilock_demote(ip, XFS_ILOCK_EXCL);
 
@@ -1082,27 +1038,18 @@ xfs_fs_write_inode(
 	struct xfs_mount	*mp = ip->i_mount;
 	int			error = EAGAIN;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_write_inode(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
 	if (wbc->sync_mode == WB_SYNC_ALL) {
 		/*
-		 * Make sure the inode has hit stable storage.  By using the
-		 * log and the fsync transactions we reduce the IOs we have
-		 * to do here from two (log and inode) to just the log.
-		 *
-		 * Note: We still need to do a delwri write of the inode after
-		 * this to flush it to the backing buffer so that bulkstat
-		 * works properly if this is the first time the inode has been
-		 * written.  Because we hold the ilock atomically over the
-		 * transaction commit and the inode flush we are guaranteed
-		 * that the inode is not pinned when it returns. If the flush
-		 * lock is already held, then the inode has already been
-		 * flushed once and we don't need to flush it again.  Hence
-		 * the code will only flush the inode if it isn't already
-		 * being flushed.
+		 * Make sure the inode has made it it into the log.  Instead
+		 * of forcing it all the way to stable storage using a
+		 * synchronous transaction we let the log force inside the
+		 * ->sync_fs call do that for thus, which reduces the number
+		 * of synchronous log foces dramatically.
 		 */
 		xfs_ioend_wait(ip);
 		xfs_ilock(ip, XFS_ILOCK_SHARED);
@@ -1116,27 +1063,29 @@ xfs_fs_write_inode(
 		 * We make this non-blocking if the inode is contended, return
 		 * EAGAIN to indicate to the caller that they did not succeed.
 		 * This prevents the flush path from blocking on inodes inside
-		 * another operation right now, they get caught later by xfs_sync.
+		 * another operation right now, they get caught later by
+		 * xfs_sync.
 		 */
 		if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED))
 			goto out;
-	}
 
-	if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip))
-		goto out_unlock;
+		if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip))
+			goto out_unlock;
 
-	/*
-	 * Now we have the flush lock and the inode is not pinned, we can check
-	 * if the inode is really clean as we know that there are no pending
-	 * transaction completions, it is not waiting on the delayed write
-	 * queue and there is no IO in progress.
-	 */
-	if (xfs_inode_clean(ip)) {
-		xfs_ifunlock(ip);
-		error = 0;
-		goto out_unlock;
+		/*
+		 * Now we have the flush lock and the inode is not pinned, we
+		 * can check if the inode is really clean as we know that
+		 * there are no pending transaction completions, it is not
+		 * waiting on the delayed write queue and there is no IO in
+		 * progress.
+		 */
+		if (xfs_inode_clean(ip)) {
+			xfs_ifunlock(ip);
+			error = 0;
+			goto out_unlock;
+		}
+		error = xfs_iflush(ip, 0);
 	}
-	error = xfs_iflush(ip, 0);
 
  out_unlock:
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
@@ -1156,7 +1105,8 @@ xfs_fs_clear_inode(
 {
 	xfs_inode_t		*ip = XFS_I(inode);
 
-	xfs_itrace_entry(ip);
+	trace_xfs_clear_inode(ip);
+
 	XFS_STATS_INC(vn_rele);
 	XFS_STATS_INC(vn_remove);
 	XFS_STATS_DEC(vn_active);
@@ -1193,22 +1143,13 @@ xfs_fs_put_super(
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
+	/*
+	 * Unregister the memory shrinker before we tear down the mount
+	 * structure so we don't have memory reclaim racing with us here.
+	 */
+	xfs_inode_shrinker_unregister(mp);
 	xfs_syncd_stop(mp);
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		/*
-		 * XXX(hch): this should be SYNC_WAIT.
-		 *
-		 * Or more likely not needed at all because the VFS is already
-		 * calling ->sync_fs after shutting down all filestem
-		 * operations and just before calling ->put_super.
-		 */
-		xfs_sync_data(mp, 0);
-		xfs_sync_attr(mp, 0);
-	}
-
-	XFS_SEND_PREUNMOUNT(mp);
-
 	/*
 	 * Blow away any referenced inode in the filestreams cache.
 	 * This can and will cause log traffic as inodes go inactive
@@ -1218,14 +1159,10 @@ xfs_fs_put_super(
 
 	XFS_bflush(mp->m_ddev_targp);
 
-	XFS_SEND_UNMOUNT(mp);
-
 	xfs_unmountfs(mp);
 	xfs_freesb(mp);
-	xfs_inode_shrinker_unregister(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
-	xfs_dmops_put(mp);
 	xfs_free_fsname(mp);
 	kfree(mp);
 }
@@ -1543,7 +1480,6 @@ xfs_fs_fill_super(
 	struct inode		*root;
 	struct xfs_mount	*mp = NULL;
 	int			flags = 0, error = ENOMEM;
-	char			*mtpt = NULL;
 
 	mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL);
 	if (!mp)
@@ -1559,7 +1495,7 @@ xfs_fs_fill_super(
 	mp->m_super = sb;
 	sb->s_fs_info = mp;
 
-	error = xfs_parseargs(mp, (char *)data, &mtpt);
+	error = xfs_parseargs(mp, (char *)data);
 	if (error)
 		goto out_free_fsname;
 
@@ -1571,16 +1507,12 @@ xfs_fs_fill_super(
 #endif
 	sb->s_op = &xfs_super_operations;
 
-	error = xfs_dmops_get(mp);
-	if (error)
-		goto out_free_fsname;
-
 	if (silent)
 		flags |= XFS_MFSI_QUIET;
 
 	error = xfs_open_devices(mp);
 	if (error)
-		goto out_put_dmops;
+		goto out_free_fsname;
 
 	if (xfs_icsb_init_counters(mp))
 		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
@@ -1608,8 +1540,6 @@ xfs_fs_fill_super(
 	if (error)
 		goto out_filestream_unmount;
 
-	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, mtpt, mp->m_fsname);
-
 	sb->s_magic = XFS_SB_MAGIC;
 	sb->s_blocksize = mp->m_sb.sb_blocksize;
 	sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
@@ -1638,7 +1568,6 @@ xfs_fs_fill_super(
 
 	xfs_inode_shrinker_register(mp);
 
-	kfree(mtpt);
 	return 0;
 
  out_filestream_unmount:
@@ -1648,11 +1577,8 @@ xfs_fs_fill_super(
  out_destroy_counters:
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
- out_put_dmops:
-	xfs_dmops_put(mp);
  out_free_fsname:
 	xfs_free_fsname(mp);
-	kfree(mtpt);
 	kfree(mp);
  out:
 	return -error;
@@ -1759,6 +1685,12 @@ xfs_init_zones(void)
 	if (!xfs_trans_zone)
 		goto out_destroy_ifork_zone;
 
+	xfs_log_item_desc_zone =
+		kmem_zone_init(sizeof(struct xfs_log_item_desc),
+			       "xfs_log_item_desc");
+	if (!xfs_log_item_desc_zone)
+		goto out_destroy_trans_zone;
+
 	/*
 	 * The size of the zone allocated buf log item is the maximum
 	 * size possible under XFS.  This wastes a little bit of memory,
@@ -1768,7 +1700,7 @@ xfs_init_zones(void)
 				(((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) /
 				  NBWORD) * sizeof(int))), "xfs_buf_item");
 	if (!xfs_buf_item_zone)
-		goto out_destroy_trans_zone;
+		goto out_destroy_log_item_desc_zone;
 
 	xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) +
 			((XFS_EFD_MAX_FAST_EXTENTS - 1) *
@@ -1805,6 +1737,8 @@ xfs_init_zones(void)
 	kmem_zone_destroy(xfs_efd_zone);
  out_destroy_buf_item_zone:
 	kmem_zone_destroy(xfs_buf_item_zone);
+ out_destroy_log_item_desc_zone:
+	kmem_zone_destroy(xfs_log_item_desc_zone);
  out_destroy_trans_zone:
 	kmem_zone_destroy(xfs_trans_zone);
  out_destroy_ifork_zone:
@@ -1835,6 +1769,7 @@ xfs_destroy_zones(void)
 	kmem_zone_destroy(xfs_efi_zone);
 	kmem_zone_destroy(xfs_efd_zone);
 	kmem_zone_destroy(xfs_buf_item_zone);
+	kmem_zone_destroy(xfs_log_item_desc_zone);
 	kmem_zone_destroy(xfs_trans_zone);
 	kmem_zone_destroy(xfs_ifork_zone);
 	kmem_zone_destroy(xfs_dabuf_zone);
@@ -1883,7 +1818,6 @@ init_xfs_fs(void)
 		goto out_cleanup_procfs;
 
 	vfs_initquota();
-	xfs_inode_shrinker_init();
 
 	error = register_filesystem(&xfs_fs_type);
 	if (error)
@@ -1911,7 +1845,6 @@ exit_xfs_fs(void)
 {
 	vfs_exitquota();
 	unregister_filesystem(&xfs_fs_type);
-	xfs_inode_shrinker_destroy();
 	xfs_sysctl_unregister();
 	xfs_cleanup_procfs();
 	xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h
index 519618e9279..1ef4a4d2d99 100644
--- a/fs/xfs/linux-2.6/xfs_super.h
+++ b/fs/xfs/linux-2.6/xfs_super.h
@@ -56,12 +56,6 @@ extern void xfs_qm_exit(void);
 # define XFS_BIGFS_STRING
 #endif
 
-#ifdef CONFIG_XFS_DMAPI
-# define XFS_DMAPI_STRING	"dmapi support, "
-#else
-# define XFS_DMAPI_STRING
-#endif
-
 #ifdef DEBUG
 # define XFS_DBG_STRING		"debug"
 #else
@@ -72,7 +66,6 @@ extern void xfs_qm_exit(void);
 				XFS_SECURITY_STRING \
 				XFS_REALTIME_STRING \
 				XFS_BIGFS_STRING \
-				XFS_DMAPI_STRING \
 				XFS_DBG_STRING /* DBG must be last */
 
 struct xfs_inode;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 3884e20bc14..dfcbd98d159 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -24,25 +24,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_inode.h"
 #include "xfs_dinode.h"
 #include "xfs_error.h"
-#include "xfs_mru_cache.h"
 #include "xfs_filestream.h"
 #include "xfs_vnodeops.h"
-#include "xfs_utils.h"
-#include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
-#include "xfs_rw.h"
 #include "xfs_quota.h"
 #include "xfs_trace.h"
 
@@ -144,6 +133,41 @@ restart:
 	return last_error;
 }
 
+/*
+ * Select the next per-ag structure to iterate during the walk. The reclaim
+ * walk is optimised only to walk AGs with reclaimable inodes in them.
+ */
+static struct xfs_perag *
+xfs_inode_ag_iter_next_pag(
+	struct xfs_mount	*mp,
+	xfs_agnumber_t		*first,
+	int			tag)
+{
+	struct xfs_perag	*pag = NULL;
+
+	if (tag == XFS_ICI_RECLAIM_TAG) {
+		int found;
+		int ref;
+
+		spin_lock(&mp->m_perag_lock);
+		found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
+				(void **)&pag, *first, 1, tag);
+		if (found <= 0) {
+			spin_unlock(&mp->m_perag_lock);
+			return NULL;
+		}
+		*first = pag->pag_agno + 1;
+		/* open coded pag reference increment */
+		ref = atomic_inc_return(&pag->pag_ref);
+		spin_unlock(&mp->m_perag_lock);
+		trace_xfs_perag_get_reclaim(mp, pag->pag_agno, ref, _RET_IP_);
+	} else {
+		pag = xfs_perag_get(mp, *first);
+		(*first)++;
+	}
+	return pag;
+}
+
 int
 xfs_inode_ag_iterator(
 	struct xfs_mount	*mp,
@@ -154,20 +178,15 @@ xfs_inode_ag_iterator(
 	int			exclusive,
 	int			*nr_to_scan)
 {
+	struct xfs_perag	*pag;
 	int			error = 0;
 	int			last_error = 0;
 	xfs_agnumber_t		ag;
 	int			nr;
 
 	nr = nr_to_scan ? *nr_to_scan : INT_MAX;
-	for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
-		struct xfs_perag	*pag;
-
-		pag = xfs_perag_get(mp, ag);
-		if (!pag->pag_ici_init) {
-			xfs_perag_put(pag);
-			continue;
-		}
+	ag = 0;
+	while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag, tag))) {
 		error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
 						exclusive, &nr);
 		xfs_perag_put(pag);
@@ -289,7 +308,7 @@ xfs_sync_inode_attr(
 /*
  * Write out pagecache data for the whole filesystem.
  */
-int
+STATIC int
 xfs_sync_data(
 	struct xfs_mount	*mp,
 	int			flags)
@@ -310,7 +329,7 @@ xfs_sync_data(
 /*
  * Write out inode metadata (attributes) for the whole filesystem.
  */
-int
+STATIC int
 xfs_sync_attr(
 	struct xfs_mount	*mp,
 	int			flags)
@@ -343,8 +362,7 @@ xfs_commit_dummy_trans(
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	error = xfs_trans_commit(tp, 0);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
@@ -644,6 +662,17 @@ __xfs_inode_set_reclaim_tag(
 	radix_tree_tag_set(&pag->pag_ici_root,
 			   XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
 			   XFS_ICI_RECLAIM_TAG);
+
+	if (!pag->pag_ici_reclaimable) {
+		/* propagate the reclaim tag up into the perag radix tree */
+		spin_lock(&ip->i_mount->m_perag_lock);
+		radix_tree_tag_set(&ip->i_mount->m_perag_tree,
+				XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+				XFS_ICI_RECLAIM_TAG);
+		spin_unlock(&ip->i_mount->m_perag_lock);
+		trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
+							-1, _RET_IP_);
+	}
 	pag->pag_ici_reclaimable++;
 }
 
@@ -678,6 +707,16 @@ __xfs_inode_clear_reclaim_tag(
 	radix_tree_tag_clear(&pag->pag_ici_root,
 			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
 	pag->pag_ici_reclaimable--;
+	if (!pag->pag_ici_reclaimable) {
+		/* clear the reclaim tag from the perag radix tree */
+		spin_lock(&ip->i_mount->m_perag_lock);
+		radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
+				XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+				XFS_ICI_RECLAIM_TAG);
+		spin_unlock(&ip->i_mount->m_perag_lock);
+		trace_xfs_perag_clear_reclaim(ip->i_mount, pag->pag_agno,
+							-1, _RET_IP_);
+	}
 }
 
 /*
@@ -816,7 +855,36 @@ out:
 reclaim:
 	xfs_ifunlock(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
-	xfs_ireclaim(ip);
+
+	XFS_STATS_INC(xs_ig_reclaims);
+	/*
+	 * Remove the inode from the per-AG radix tree.
+	 *
+	 * Because radix_tree_delete won't complain even if the item was never
+	 * added to the tree assert that it's been there before to catch
+	 * problems with the inode life time early on.
+	 */
+	write_lock(&pag->pag_ici_lock);
+	if (!radix_tree_delete(&pag->pag_ici_root,
+				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
+		ASSERT(0);
+	write_unlock(&pag->pag_ici_lock);
+
+	/*
+	 * Here we do an (almost) spurious inode lock in order to coordinate
+	 * with inode cache radix tree lookups.  This is because the lookup
+	 * can reference the inodes in the cache without taking references.
+	 *
+	 * We make that OK here by ensuring that we wait until the inode is
+	 * unlocked after the lookup before we go ahead and free it.  We get
+	 * both the ilock and the iolock because the code may need to drop the
+	 * ilock one but will still hold the iolock.
+	 */
+	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_qm_dqdetach(ip);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+
+	xfs_inode_free(ip);
 	return error;
 
 }
@@ -832,88 +900,52 @@ xfs_reclaim_inodes(
 
 /*
  * Shrinker infrastructure.
- *
- * This is all far more complex than it needs to be. It adds a global list of
- * mounts because the shrinkers can only call a global context. We need to make
- * the shrinkers pass a context to avoid the need for global state.
  */
-static LIST_HEAD(xfs_mount_list);
-static struct rw_semaphore xfs_mount_list_lock;
-
 static int
 xfs_reclaim_inode_shrink(
+	struct shrinker	*shrink,
 	int		nr_to_scan,
 	gfp_t		gfp_mask)
 {
 	struct xfs_mount *mp;
 	struct xfs_perag *pag;
 	xfs_agnumber_t	ag;
-	int		reclaimable = 0;
+	int		reclaimable;
 
+	mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
 	if (nr_to_scan) {
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 
-		down_read(&xfs_mount_list_lock);
-		list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
-			xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+		xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
 					XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
-			if (nr_to_scan <= 0)
-				break;
-		}
-		up_read(&xfs_mount_list_lock);
-	}
-
-	down_read(&xfs_mount_list_lock);
-	list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
-		for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
+		/* if we don't exhaust the scan, don't bother coming back */
+		if (nr_to_scan > 0)
+			return -1;
+       }
 
-			pag = xfs_perag_get(mp, ag);
-			if (!pag->pag_ici_init) {
-				xfs_perag_put(pag);
-				continue;
-			}
-			reclaimable += pag->pag_ici_reclaimable;
-			xfs_perag_put(pag);
-		}
+	reclaimable = 0;
+	ag = 0;
+	while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag,
+					XFS_ICI_RECLAIM_TAG))) {
+		reclaimable += pag->pag_ici_reclaimable;
+		xfs_perag_put(pag);
 	}
-	up_read(&xfs_mount_list_lock);
 	return reclaimable;
 }
 
-static struct shrinker xfs_inode_shrinker = {
-	.shrink = xfs_reclaim_inode_shrink,
-	.seeks = DEFAULT_SEEKS,
-};
-
-void __init
-xfs_inode_shrinker_init(void)
-{
-	init_rwsem(&xfs_mount_list_lock);
-	register_shrinker(&xfs_inode_shrinker);
-}
-
-void
-xfs_inode_shrinker_destroy(void)
-{
-	ASSERT(list_empty(&xfs_mount_list));
-	unregister_shrinker(&xfs_inode_shrinker);
-}
-
 void
 xfs_inode_shrinker_register(
 	struct xfs_mount	*mp)
 {
-	down_write(&xfs_mount_list_lock);
-	list_add_tail(&mp->m_mplist, &xfs_mount_list);
-	up_write(&xfs_mount_list_lock);
+	mp->m_inode_shrink.shrink = xfs_reclaim_inode_shrink;
+	mp->m_inode_shrink.seeks = DEFAULT_SEEKS;
+	register_shrinker(&mp->m_inode_shrink);
 }
 
 void
 xfs_inode_shrinker_unregister(
 	struct xfs_mount	*mp)
 {
-	down_write(&xfs_mount_list_lock);
-	list_del(&mp->m_mplist);
-	up_write(&xfs_mount_list_lock);
+	unregister_shrinker(&mp->m_inode_shrink);
 }
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index cdcbaaca988..fe78726196f 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -35,9 +35,6 @@ typedef struct xfs_sync_work {
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
 
-int xfs_sync_attr(struct xfs_mount *mp, int flags);
-int xfs_sync_data(struct xfs_mount *mp, int flags);
-
 int xfs_quiesce_data(struct xfs_mount *mp);
 void xfs_quiesce_attr(struct xfs_mount *mp);
 
@@ -55,8 +52,6 @@ int xfs_inode_ag_iterator(struct xfs_mount *mp,
 	int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
 	int flags, int tag, int write_lock, int *nr_to_scan);
 
-void xfs_inode_shrinker_init(void);
-void xfs_inode_shrinker_destroy(void);
 void xfs_inode_shrinker_register(struct xfs_mount *mp);
 void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
 
diff --git a/fs/xfs/linux-2.6/xfs_trace.c b/fs/xfs/linux-2.6/xfs_trace.c
index 207fa77f63a..88d25d4aa56 100644
--- a/fs/xfs/linux-2.6/xfs_trace.c
+++ b/fs/xfs/linux-2.6/xfs_trace.c
@@ -24,17 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
@@ -50,7 +46,6 @@
 #include "quota/xfs_dquot_item.h"
 #include "quota/xfs_dquot.h"
 #include "xfs_log_recover.h"
-#include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index ff6bc797baf..c657cdca2cd 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -82,33 +82,6 @@ DECLARE_EVENT_CLASS(xfs_attr_list_class,
 	)
 )
 
-#define DEFINE_PERAG_REF_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount, \
-		 unsigned long caller_ip), \
-	TP_ARGS(mp, agno, refcount, caller_ip), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_agnumber_t, agno) \
-		__field(int, refcount) \
-		__field(unsigned long, caller_ip) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = mp->m_super->s_dev; \
-		__entry->agno = agno; \
-		__entry->refcount = refcount; \
-		__entry->caller_ip = caller_ip; \
-	), \
-	TP_printk("dev %d:%d agno %u refcount %d caller %pf", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->agno, \
-		  __entry->refcount, \
-		  (char *)__entry->caller_ip) \
-);
-
-DEFINE_PERAG_REF_EVENT(xfs_perag_get)
-DEFINE_PERAG_REF_EVENT(xfs_perag_put)
-
 #define DEFINE_ATTR_LIST_EVENT(name) \
 DEFINE_EVENT(xfs_attr_list_class, name, \
 	TP_PROTO(struct xfs_attr_list_context *ctx), \
@@ -122,6 +95,40 @@ DEFINE_ATTR_LIST_EVENT(xfs_attr_list_add);
 DEFINE_ATTR_LIST_EVENT(xfs_attr_list_wrong_blk);
 DEFINE_ATTR_LIST_EVENT(xfs_attr_list_notfound);
 
+DECLARE_EVENT_CLASS(xfs_perag_class,
+	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount,
+		 unsigned long caller_ip),
+	TP_ARGS(mp, agno, refcount, caller_ip),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_agnumber_t, agno)
+		__field(int, refcount)
+		__field(unsigned long, caller_ip)
+	),
+	TP_fast_assign(
+		__entry->dev = mp->m_super->s_dev;
+		__entry->agno = agno;
+		__entry->refcount = refcount;
+		__entry->caller_ip = caller_ip;
+	),
+	TP_printk("dev %d:%d agno %u refcount %d caller %pf",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->agno,
+		  __entry->refcount,
+		  (char *)__entry->caller_ip)
+);
+
+#define DEFINE_PERAG_REF_EVENT(name)	\
+DEFINE_EVENT(xfs_perag_class, name,	\
+	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount,	\
+		 unsigned long caller_ip),					\
+	TP_ARGS(mp, agno, refcount, caller_ip))
+DEFINE_PERAG_REF_EVENT(xfs_perag_get);
+DEFINE_PERAG_REF_EVENT(xfs_perag_get_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_put);
+DEFINE_PERAG_REF_EVENT(xfs_perag_set_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_clear_reclaim);
+
 TRACE_EVENT(xfs_attr_list_node_descend,
 	TP_PROTO(struct xfs_attr_list_context *ctx,
 		 struct xfs_da_node_entry *btree),
@@ -310,8 +317,6 @@ DEFINE_BUF_EVENT(xfs_buf_init);
 DEFINE_BUF_EVENT(xfs_buf_free);
 DEFINE_BUF_EVENT(xfs_buf_hold);
 DEFINE_BUF_EVENT(xfs_buf_rele);
-DEFINE_BUF_EVENT(xfs_buf_pin);
-DEFINE_BUF_EVENT(xfs_buf_unpin);
 DEFINE_BUF_EVENT(xfs_buf_iodone);
 DEFINE_BUF_EVENT(xfs_buf_iorequest);
 DEFINE_BUF_EVENT(xfs_buf_bawrite);
@@ -534,7 +539,7 @@ DEFINE_LOCK_EVENT(xfs_ilock_nowait);
 DEFINE_LOCK_EVENT(xfs_ilock_demote);
 DEFINE_LOCK_EVENT(xfs_iunlock);
 
-DECLARE_EVENT_CLASS(xfs_iget_class,
+DECLARE_EVENT_CLASS(xfs_inode_class,
 	TP_PROTO(struct xfs_inode *ip),
 	TP_ARGS(ip),
 	TP_STRUCT__entry(
@@ -550,16 +555,38 @@ DECLARE_EVENT_CLASS(xfs_iget_class,
 		  __entry->ino)
 )
 
-#define DEFINE_IGET_EVENT(name) \
-DEFINE_EVENT(xfs_iget_class, name, \
+#define DEFINE_INODE_EVENT(name) \
+DEFINE_EVENT(xfs_inode_class, name, \
 	TP_PROTO(struct xfs_inode *ip), \
 	TP_ARGS(ip))
-DEFINE_IGET_EVENT(xfs_iget_skip);
-DEFINE_IGET_EVENT(xfs_iget_reclaim);
-DEFINE_IGET_EVENT(xfs_iget_found);
-DEFINE_IGET_EVENT(xfs_iget_alloc);
-
-DECLARE_EVENT_CLASS(xfs_inode_class,
+DEFINE_INODE_EVENT(xfs_iget_skip);
+DEFINE_INODE_EVENT(xfs_iget_reclaim);
+DEFINE_INODE_EVENT(xfs_iget_reclaim_fail);
+DEFINE_INODE_EVENT(xfs_iget_hit);
+DEFINE_INODE_EVENT(xfs_iget_miss);
+
+DEFINE_INODE_EVENT(xfs_getattr);
+DEFINE_INODE_EVENT(xfs_setattr);
+DEFINE_INODE_EVENT(xfs_readlink);
+DEFINE_INODE_EVENT(xfs_alloc_file_space);
+DEFINE_INODE_EVENT(xfs_free_file_space);
+DEFINE_INODE_EVENT(xfs_readdir);
+#ifdef CONFIG_XFS_POSIX_ACL
+DEFINE_INODE_EVENT(xfs_check_acl);
+#endif
+DEFINE_INODE_EVENT(xfs_vm_bmap);
+DEFINE_INODE_EVENT(xfs_file_ioctl);
+DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
+DEFINE_INODE_EVENT(xfs_ioctl_setattr);
+DEFINE_INODE_EVENT(xfs_file_fsync);
+DEFINE_INODE_EVENT(xfs_destroy_inode);
+DEFINE_INODE_EVENT(xfs_write_inode);
+DEFINE_INODE_EVENT(xfs_clear_inode);
+
+DEFINE_INODE_EVENT(xfs_dquot_dqalloc);
+DEFINE_INODE_EVENT(xfs_dquot_dqdetach);
+
+DECLARE_EVENT_CLASS(xfs_iref_class,
 	TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip),
 	TP_ARGS(ip, caller_ip),
 	TP_STRUCT__entry(
@@ -584,20 +611,71 @@ DECLARE_EVENT_CLASS(xfs_inode_class,
 		  (char *)__entry->caller_ip)
 )
 
-#define DEFINE_INODE_EVENT(name) \
-DEFINE_EVENT(xfs_inode_class, name, \
+#define DEFINE_IREF_EVENT(name) \
+DEFINE_EVENT(xfs_iref_class, name, \
 	TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \
 	TP_ARGS(ip, caller_ip))
-DEFINE_INODE_EVENT(xfs_ihold);
-DEFINE_INODE_EVENT(xfs_irele);
-DEFINE_INODE_EVENT(xfs_inode_pin);
-DEFINE_INODE_EVENT(xfs_inode_unpin);
-DEFINE_INODE_EVENT(xfs_inode_unpin_nowait);
+DEFINE_IREF_EVENT(xfs_ihold);
+DEFINE_IREF_EVENT(xfs_irele);
+DEFINE_IREF_EVENT(xfs_inode_pin);
+DEFINE_IREF_EVENT(xfs_inode_unpin);
+DEFINE_IREF_EVENT(xfs_inode_unpin_nowait);
+
+DECLARE_EVENT_CLASS(xfs_namespace_class,
+	TP_PROTO(struct xfs_inode *dp, struct xfs_name *name),
+	TP_ARGS(dp, name),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, dp_ino)
+		__dynamic_array(char, name, name->len)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(dp)->i_sb->s_dev;
+		__entry->dp_ino = dp->i_ino;
+		memcpy(__get_str(name), name->name, name->len);
+	),
+	TP_printk("dev %d:%d dp ino 0x%llx name %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->dp_ino,
+		  __get_str(name))
+)
 
-/* the old xfs_itrace_entry tracer - to be replaced by s.th. in the VFS */
-DEFINE_INODE_EVENT(xfs_inode);
-#define xfs_itrace_entry(ip)    \
-	trace_xfs_inode(ip, _THIS_IP_)
+#define DEFINE_NAMESPACE_EVENT(name) \
+DEFINE_EVENT(xfs_namespace_class, name, \
+	TP_PROTO(struct xfs_inode *dp, struct xfs_name *name), \
+	TP_ARGS(dp, name))
+DEFINE_NAMESPACE_EVENT(xfs_remove);
+DEFINE_NAMESPACE_EVENT(xfs_link);
+DEFINE_NAMESPACE_EVENT(xfs_lookup);
+DEFINE_NAMESPACE_EVENT(xfs_create);
+DEFINE_NAMESPACE_EVENT(xfs_symlink);
+
+TRACE_EVENT(xfs_rename,
+	TP_PROTO(struct xfs_inode *src_dp, struct xfs_inode *target_dp,
+		 struct xfs_name *src_name, struct xfs_name *target_name),
+	TP_ARGS(src_dp, target_dp, src_name, target_name),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, src_dp_ino)
+		__field(xfs_ino_t, target_dp_ino)
+		__dynamic_array(char, src_name, src_name->len)
+		__dynamic_array(char, target_name, target_name->len)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(src_dp)->i_sb->s_dev;
+		__entry->src_dp_ino = src_dp->i_ino;
+		__entry->target_dp_ino = target_dp->i_ino;
+		memcpy(__get_str(src_name), src_name->name, src_name->len);
+		memcpy(__get_str(target_name), target_name->name, target_name->len);
+	),
+	TP_printk("dev %d:%d src dp ino 0x%llx target dp ino 0x%llx"
+		  " src name %s target name %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->src_dp_ino,
+		  __entry->target_dp_ino,
+		  __get_str(src_name),
+		  __get_str(target_name))
+)
 
 DECLARE_EVENT_CLASS(xfs_dquot_class,
 	TP_PROTO(struct xfs_dquot *dqp),
@@ -677,9 +755,6 @@ DEFINE_DQUOT_EVENT(xfs_dqrele);
 DEFINE_DQUOT_EVENT(xfs_dqflush);
 DEFINE_DQUOT_EVENT(xfs_dqflush_force);
 DEFINE_DQUOT_EVENT(xfs_dqflush_done);
-/* not really iget events, but we re-use the format */
-DEFINE_IGET_EVENT(xfs_dquot_dqalloc);
-DEFINE_IGET_EVENT(xfs_dquot_dqdetach);
 
 DECLARE_EVENT_CLASS(xfs_loggrant_class,
 	TP_PROTO(struct log *log, struct xlog_ticket *tic),
@@ -775,165 +850,177 @@ DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_enter);
 DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
 DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
 
-#define DEFINE_RW_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags), \
-	TP_ARGS(ip, count, offset, flags), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(xfs_fsize_t, size) \
-		__field(xfs_fsize_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-		__field(int, flags) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-		__entry->flags = flags; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count 0x%zx ioflags %s", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count, \
-		  __print_flags(__entry->flags, "|", XFS_IO_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_file_class,
+	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),
+	TP_ARGS(ip, count, offset, flags),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(xfs_fsize_t, size)
+		__field(xfs_fsize_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+		__field(int, flags)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->flags = flags;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count 0x%zx ioflags %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count,
+		  __print_flags(__entry->flags, "|", XFS_IO_FLAGS))
 )
+
+#define DEFINE_RW_EVENT(name)		\
+DEFINE_EVENT(xfs_file_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),	\
+	TP_ARGS(ip, count, offset, flags))
 DEFINE_RW_EVENT(xfs_file_read);
 DEFINE_RW_EVENT(xfs_file_buffered_write);
 DEFINE_RW_EVENT(xfs_file_direct_write);
 DEFINE_RW_EVENT(xfs_file_splice_read);
 DEFINE_RW_EVENT(xfs_file_splice_write);
 
-
-#define DEFINE_PAGE_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct inode *inode, struct page *page, unsigned long off), \
-	TP_ARGS(inode, page, off), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(pgoff_t, pgoff) \
-		__field(loff_t, size) \
-		__field(unsigned long, offset) \
-		__field(int, delalloc) \
-		__field(int, unmapped) \
-		__field(int, unwritten) \
-	), \
-	TP_fast_assign( \
-		int delalloc = -1, unmapped = -1, unwritten = -1; \
-	\
-		if (page_has_buffers(page)) \
-			xfs_count_page_state(page, &delalloc, \
-					     &unmapped, &unwritten); \
-		__entry->dev = inode->i_sb->s_dev; \
-		__entry->ino = XFS_I(inode)->i_ino; \
-		__entry->pgoff = page_offset(page); \
-		__entry->size = i_size_read(inode); \
-		__entry->offset = off; \
-		__entry->delalloc = delalloc; \
-		__entry->unmapped = unmapped; \
-		__entry->unwritten = unwritten; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx " \
-		  "delalloc %d unmapped %d unwritten %d", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->pgoff, \
-		  __entry->size, \
-		  __entry->offset, \
-		  __entry->delalloc, \
-		  __entry->unmapped, \
-		  __entry->unwritten) \
+DECLARE_EVENT_CLASS(xfs_page_class,
+	TP_PROTO(struct inode *inode, struct page *page, unsigned long off),
+	TP_ARGS(inode, page, off),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(pgoff_t, pgoff)
+		__field(loff_t, size)
+		__field(unsigned long, offset)
+		__field(int, delalloc)
+		__field(int, unwritten)
+	),
+	TP_fast_assign(
+		int delalloc = -1, unwritten = -1;
+
+		if (page_has_buffers(page))
+			xfs_count_page_state(page, &delalloc, &unwritten);
+		__entry->dev = inode->i_sb->s_dev;
+		__entry->ino = XFS_I(inode)->i_ino;
+		__entry->pgoff = page_offset(page);
+		__entry->size = i_size_read(inode);
+		__entry->offset = off;
+		__entry->delalloc = delalloc;
+		__entry->unwritten = unwritten;
+	),
+	TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx "
+		  "delalloc %d unwritten %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->pgoff,
+		  __entry->size,
+		  __entry->offset,
+		  __entry->delalloc,
+		  __entry->unwritten)
 )
+
+#define DEFINE_PAGE_EVENT(name)		\
+DEFINE_EVENT(xfs_page_class, name,	\
+	TP_PROTO(struct inode *inode, struct page *page, unsigned long off),	\
+	TP_ARGS(inode, page, off))
 DEFINE_PAGE_EVENT(xfs_writepage);
 DEFINE_PAGE_EVENT(xfs_releasepage);
 DEFINE_PAGE_EVENT(xfs_invalidatepage);
 
-#define DEFINE_IOMAP_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count, \
-		 int flags, struct xfs_bmbt_irec *irec), \
-	TP_ARGS(ip, offset, count, flags, irec), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(loff_t, size) \
-		__field(loff_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-		__field(int, flags) \
-		__field(xfs_fileoff_t, startoff) \
-		__field(xfs_fsblock_t, startblock) \
-		__field(xfs_filblks_t, blockcount) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-		__entry->flags = flags; \
-		__entry->startoff = irec ? irec->br_startoff : 0; \
-		__entry->startblock = irec ? irec->br_startblock : 0; \
-		__entry->blockcount = irec ? irec->br_blockcount : 0; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count %zd flags %s " \
-		  "startoff 0x%llx startblock %lld blockcount 0x%llx", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count, \
-		  __print_flags(__entry->flags, "|", BMAPI_FLAGS), \
-		  __entry->startoff, \
-		  (__int64_t)__entry->startblock, \
-		  __entry->blockcount) \
+DECLARE_EVENT_CLASS(xfs_iomap_class,
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count,
+		 int flags, struct xfs_bmbt_irec *irec),
+	TP_ARGS(ip, offset, count, flags, irec),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(loff_t, size)
+		__field(loff_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+		__field(int, flags)
+		__field(xfs_fileoff_t, startoff)
+		__field(xfs_fsblock_t, startblock)
+		__field(xfs_filblks_t, blockcount)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->flags = flags;
+		__entry->startoff = irec ? irec->br_startoff : 0;
+		__entry->startblock = irec ? irec->br_startblock : 0;
+		__entry->blockcount = irec ? irec->br_blockcount : 0;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count %zd flags %s "
+		  "startoff 0x%llx startblock %lld blockcount 0x%llx",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count,
+		  __print_flags(__entry->flags, "|", BMAPI_FLAGS),
+		  __entry->startoff,
+		  (__int64_t)__entry->startblock,
+		  __entry->blockcount)
 )
+
+#define DEFINE_IOMAP_EVENT(name)	\
+DEFINE_EVENT(xfs_iomap_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count,	\
+		 int flags, struct xfs_bmbt_irec *irec),		\
+	TP_ARGS(ip, offset, count, flags, irec))
 DEFINE_IOMAP_EVENT(xfs_iomap_enter);
 DEFINE_IOMAP_EVENT(xfs_iomap_found);
 DEFINE_IOMAP_EVENT(xfs_iomap_alloc);
 
-#define DEFINE_SIMPLE_IO_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count), \
-	TP_ARGS(ip, offset, count), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(loff_t, size) \
-		__field(loff_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count %zd", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count) \
+DECLARE_EVENT_CLASS(xfs_simple_io_class,
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count),
+	TP_ARGS(ip, offset, count),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(loff_t, size)
+		__field(loff_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count %zd",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count)
 );
+
+#define DEFINE_SIMPLE_IO_EVENT(name)	\
+DEFINE_EVENT(xfs_simple_io_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count),	\
+	TP_ARGS(ip, offset, count))
 DEFINE_SIMPLE_IO_EVENT(xfs_delalloc_enospc);
 DEFINE_SIMPLE_IO_EVENT(xfs_unwritten_convert);
 
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 585e7633dfc..e1a2f6800e0 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -64,8 +54,6 @@
    flush lock - ditto.
 */
 
-STATIC void		xfs_qm_dqflush_done(xfs_buf_t *, xfs_dq_logitem_t *);
-
 #ifdef DEBUG
 xfs_buftarg_t *xfs_dqerror_target;
 int xfs_do_dqerror;
@@ -390,21 +378,14 @@ xfs_qm_dqalloc(
 		return (ESRCH);
 	}
 
-	/*
-	 * xfs_trans_commit normally decrements the vnode ref count
-	 * when it unlocks the inode. Since we want to keep the quota
-	 * inode around, we bump the vnode ref count now.
-	 */
-	IHOLD(quotip);
-
-	xfs_trans_ijoin(tp, quotip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, quotip, XFS_ILOCK_EXCL);
 	nmaps = 1;
 	if ((error = xfs_bmapi(tp, quotip,
 			      offset_fsb, XFS_DQUOT_CLUSTER_SIZE_FSB,
 			      XFS_BMAPI_METADATA | XFS_BMAPI_WRITE,
 			      &firstblock,
 			      XFS_QM_DQALLOC_SPACE_RES(mp),
-			      &map, &nmaps, &flist, NULL))) {
+			      &map, &nmaps, &flist))) {
 		goto error0;
 	}
 	ASSERT(map.br_blockcount == XFS_DQUOT_CLUSTER_SIZE_FSB);
@@ -520,7 +501,7 @@ xfs_qm_dqtobp(
 		error = xfs_bmapi(NULL, quotip, dqp->q_fileoffset,
 				  XFS_DQUOT_CLUSTER_SIZE_FSB,
 				  XFS_BMAPI_METADATA,
-				  NULL, 0, &map, &nmaps, NULL, NULL);
+				  NULL, 0, &map, &nmaps, NULL);
 
 		xfs_iunlock(quotip, XFS_ILOCK_SHARED);
 		if (error)
@@ -1141,6 +1122,46 @@ xfs_qm_dqrele(
 	xfs_qm_dqput(dqp);
 }
 
+/*
+ * This is the dquot flushing I/O completion routine.  It is called
+ * from interrupt level when the buffer containing the dquot is
+ * flushed to disk.  It is responsible for removing the dquot logitem
+ * from the AIL if it has not been re-logged, and unlocking the dquot's
+ * flush lock. This behavior is very similar to that of inodes..
+ */
+STATIC void
+xfs_qm_dqflush_done(
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
+{
+	xfs_dq_logitem_t	*qip = (struct xfs_dq_logitem *)lip;
+	xfs_dquot_t		*dqp = qip->qli_dquot;
+	struct xfs_ail		*ailp = lip->li_ailp;
+
+	/*
+	 * We only want to pull the item from the AIL if its
+	 * location in the log has not changed since we started the flush.
+	 * Thus, we only bother if the dquot's lsn has
+	 * not changed. First we check the lsn outside the lock
+	 * since it's cheaper, and then we recheck while
+	 * holding the lock before removing the dquot from the AIL.
+	 */
+	if ((lip->li_flags & XFS_LI_IN_AIL) &&
+	    lip->li_lsn == qip->qli_flush_lsn) {
+
+		/* xfs_trans_ail_delete() drops the AIL lock. */
+		spin_lock(&ailp->xa_lock);
+		if (lip->li_lsn == qip->qli_flush_lsn)
+			xfs_trans_ail_delete(ailp, lip);
+		else
+			spin_unlock(&ailp->xa_lock);
+	}
+
+	/*
+	 * Release the dq's flush lock since we're done with it.
+	 */
+	xfs_dqfunlock(dqp);
+}
 
 /*
  * Write a modified dquot to disk.
@@ -1222,8 +1243,9 @@ xfs_qm_dqflush(
 	 * Attach an iodone routine so that we can remove this dquot from the
 	 * AIL and release the flush lock once the dquot is synced to disk.
 	 */
-	xfs_buf_attach_iodone(bp, (void(*)(xfs_buf_t *, xfs_log_item_t *))
-			      xfs_qm_dqflush_done, &(dqp->q_logitem.qli_item));
+	xfs_buf_attach_iodone(bp, xfs_qm_dqflush_done,
+				  &dqp->q_logitem.qli_item);
+
 	/*
 	 * If the buffer is pinned then push on the log so we won't
 	 * get stuck waiting in the write for too long.
@@ -1247,50 +1269,6 @@ xfs_qm_dqflush(
 
 }
 
-/*
- * This is the dquot flushing I/O completion routine.  It is called
- * from interrupt level when the buffer containing the dquot is
- * flushed to disk.  It is responsible for removing the dquot logitem
- * from the AIL if it has not been re-logged, and unlocking the dquot's
- * flush lock. This behavior is very similar to that of inodes..
- */
-/*ARGSUSED*/
-STATIC void
-xfs_qm_dqflush_done(
-	xfs_buf_t		*bp,
-	xfs_dq_logitem_t	*qip)
-{
-	xfs_dquot_t		*dqp;
-	struct xfs_ail		*ailp;
-
-	dqp = qip->qli_dquot;
-	ailp = qip->qli_item.li_ailp;
-
-	/*
-	 * We only want to pull the item from the AIL if its
-	 * location in the log has not changed since we started the flush.
-	 * Thus, we only bother if the dquot's lsn has
-	 * not changed. First we check the lsn outside the lock
-	 * since it's cheaper, and then we recheck while
-	 * holding the lock before removing the dquot from the AIL.
-	 */
-	if ((qip->qli_item.li_flags & XFS_LI_IN_AIL) &&
-	    qip->qli_item.li_lsn == qip->qli_flush_lsn) {
-
-		/* xfs_trans_ail_delete() drops the AIL lock. */
-		spin_lock(&ailp->xa_lock);
-		if (qip->qli_item.li_lsn == qip->qli_flush_lsn)
-			xfs_trans_ail_delete(ailp, (xfs_log_item_t*)qip);
-		else
-			spin_unlock(&ailp->xa_lock);
-	}
-
-	/*
-	 * Release the dq's flush lock since we're done with it.
-	 */
-	xfs_dqfunlock(dqp);
-}
-
 int
 xfs_qm_dqlock_nowait(
 	xfs_dquot_t *dqp)
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 8d89a24ae32..2a1f3dc10a0 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -23,42 +23,36 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
 #include "xfs_qm.h"
 
+static inline struct xfs_dq_logitem *DQUOT_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_dq_logitem, qli_item);
+}
+
 /*
  * returns the number of iovecs needed to log the given dquot item.
  */
-/* ARGSUSED */
 STATIC uint
 xfs_qm_dquot_logitem_size(
-	xfs_dq_logitem_t	*logitem)
+	struct xfs_log_item	*lip)
 {
 	/*
 	 * we need only two iovecs, one for the format, one for the real thing
 	 */
-	return (2);
+	return 2;
 }
 
 /*
@@ -66,22 +60,21 @@ xfs_qm_dquot_logitem_size(
  */
 STATIC void
 xfs_qm_dquot_logitem_format(
-	xfs_dq_logitem_t	*logitem,
-	xfs_log_iovec_t		*logvec)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*logvec)
 {
-	ASSERT(logitem);
-	ASSERT(logitem->qli_dquot);
+	struct xfs_dq_logitem	*qlip = DQUOT_ITEM(lip);
 
-	logvec->i_addr = (xfs_caddr_t)&logitem->qli_format;
+	logvec->i_addr = &qlip->qli_format;
 	logvec->i_len  = sizeof(xfs_dq_logformat_t);
 	logvec->i_type = XLOG_REG_TYPE_QFORMAT;
 	logvec++;
-	logvec->i_addr = (xfs_caddr_t)&logitem->qli_dquot->q_core;
+	logvec->i_addr = &qlip->qli_dquot->q_core;
 	logvec->i_len  = sizeof(xfs_disk_dquot_t);
 	logvec->i_type = XLOG_REG_TYPE_DQUOT;
 
-	ASSERT(2 == logitem->qli_item.li_desc->lid_size);
-	logitem->qli_format.qlf_size = 2;
+	ASSERT(2 == lip->li_desc->lid_size);
+	qlip->qli_format.qlf_size = 2;
 
 }
 
@@ -90,9 +83,9 @@ xfs_qm_dquot_logitem_format(
  */
 STATIC void
 xfs_qm_dquot_logitem_pin(
-	xfs_dq_logitem_t *logitem)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t *dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	atomic_inc(&dqp->q_pincount);
@@ -104,27 +97,18 @@ xfs_qm_dquot_logitem_pin(
  * dquot must have been previously pinned with a call to
  * xfs_qm_dquot_logitem_pin().
  */
-/* ARGSUSED */
 STATIC void
 xfs_qm_dquot_logitem_unpin(
-	xfs_dq_logitem_t *logitem)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	xfs_dquot_t *dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
 	ASSERT(atomic_read(&dqp->q_pincount) > 0);
 	if (atomic_dec_and_test(&dqp->q_pincount))
 		wake_up(&dqp->q_pinwait);
 }
 
-/* ARGSUSED */
-STATIC void
-xfs_qm_dquot_logitem_unpin_remove(
-	xfs_dq_logitem_t *logitem,
-	xfs_trans_t	 *tp)
-{
-	xfs_qm_dquot_logitem_unpin(logitem);
-}
-
 /*
  * Given the logitem, this writes the corresponding dquot entry to disk
  * asynchronously. This is called with the dquot entry securely locked;
@@ -133,12 +117,10 @@ xfs_qm_dquot_logitem_unpin_remove(
  */
 STATIC void
 xfs_qm_dquot_logitem_push(
-	xfs_dq_logitem_t	*logitem)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
-	int		error;
-
-	dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
+	int			error;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	ASSERT(!completion_done(&dqp->q_flush));
@@ -160,27 +142,25 @@ xfs_qm_dquot_logitem_push(
 	xfs_dqunlock(dqp);
 }
 
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_qm_dquot_logitem_committed(
-	xfs_dq_logitem_t	*l,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
 	/*
 	 * We always re-log the entire dquot when it becomes dirty,
 	 * so, the latest copy _is_ the only one that matters.
 	 */
-	return (lsn);
+	return lsn;
 }
 
-
 /*
  * This is called to wait for the given dquot to be unpinned.
  * Most of these pin/unpin routines are plagiarized from inode code.
  */
 void
 xfs_qm_dqunpin_wait(
-	xfs_dquot_t	*dqp)
+	struct xfs_dquot	*dqp)
 {
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	if (atomic_read(&dqp->q_pincount) == 0)
@@ -206,13 +186,12 @@ xfs_qm_dqunpin_wait(
  */
 STATIC void
 xfs_qm_dquot_logitem_pushbuf(
-	xfs_dq_logitem_t    *qip)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
-	xfs_mount_t	*mp;
-	xfs_buf_t	*bp;
+	struct xfs_dq_logitem	*qlip = DQUOT_ITEM(lip);
+	struct xfs_dquot	*dqp = qlip->qli_dquot;
+	struct xfs_buf		*bp;
 
-	dqp = qip->qli_dquot;
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
 	/*
@@ -220,22 +199,20 @@ xfs_qm_dquot_logitem_pushbuf(
 	 * inode flush completed and the inode was taken off the AIL.
 	 * So, just get out.
 	 */
-	if (completion_done(&dqp->q_flush)  ||
-	    ((qip->qli_item.li_flags & XFS_LI_IN_AIL) == 0)) {
+	if (completion_done(&dqp->q_flush) ||
+	    !(lip->li_flags & XFS_LI_IN_AIL)) {
 		xfs_dqunlock(dqp);
 		return;
 	}
-	mp = dqp->q_mount;
-	bp = xfs_incore(mp->m_ddev_targp, qip->qli_format.qlf_blkno,
-			mp->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
+
+	bp = xfs_incore(dqp->q_mount->m_ddev_targp, qlip->qli_format.qlf_blkno,
+			dqp->q_mount->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
 	xfs_dqunlock(dqp);
 	if (!bp)
 		return;
 	if (XFS_BUF_ISDELAYWRITE(bp))
 		xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
-	return;
-
 }
 
 /*
@@ -250,15 +227,14 @@ xfs_qm_dquot_logitem_pushbuf(
  */
 STATIC uint
 xfs_qm_dquot_logitem_trylock(
-	xfs_dq_logitem_t	*qip)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t		*dqp;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
-	dqp = qip->qli_dquot;
 	if (atomic_read(&dqp->q_pincount) > 0)
 		return XFS_ITEM_PINNED;
 
-	if (! xfs_qm_dqlock_nowait(dqp))
+	if (!xfs_qm_dqlock_nowait(dqp))
 		return XFS_ITEM_LOCKED;
 
 	if (!xfs_dqflock_nowait(dqp)) {
@@ -269,11 +245,10 @@ xfs_qm_dquot_logitem_trylock(
 		return XFS_ITEM_PUSHBUF;
 	}
 
-	ASSERT(qip->qli_item.li_flags & XFS_LI_IN_AIL);
+	ASSERT(lip->li_flags & XFS_LI_IN_AIL);
 	return XFS_ITEM_SUCCESS;
 }
 
-
 /*
  * Unlock the dquot associated with the log item.
  * Clear the fields of the dquot and dquot log item that
@@ -282,12 +257,10 @@ xfs_qm_dquot_logitem_trylock(
  */
 STATIC void
 xfs_qm_dquot_logitem_unlock(
-	xfs_dq_logitem_t    *ql)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
-	ASSERT(ql != NULL);
-	dqp = ql->qli_dquot;
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
 	/*
@@ -304,43 +277,32 @@ xfs_qm_dquot_logitem_unlock(
 	xfs_dqunlock(dqp);
 }
 
-
 /*
  * this needs to stamp an lsn into the dquot, I think.
  * rpc's that look at user dquot's would then have to
  * push on the dependency recorded in the dquot
  */
-/* ARGSUSED */
 STATIC void
 xfs_qm_dquot_logitem_committing(
-	xfs_dq_logitem_t	*l,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	return;
 }
 
-
 /*
  * This is the ops vector for dquots
  */
 static struct xfs_item_ops xfs_dquot_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_dquot_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_qm_dquot_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))
-					xfs_qm_dquot_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_dquot_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))
-					xfs_qm_dquot_logitem_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_dquot_logitem_committing
+	.iop_size	= xfs_qm_dquot_logitem_size,
+	.iop_format	= xfs_qm_dquot_logitem_format,
+	.iop_pin	= xfs_qm_dquot_logitem_pin,
+	.iop_unpin	= xfs_qm_dquot_logitem_unpin,
+	.iop_trylock	= xfs_qm_dquot_logitem_trylock,
+	.iop_unlock	= xfs_qm_dquot_logitem_unlock,
+	.iop_committed	= xfs_qm_dquot_logitem_committed,
+	.iop_push	= xfs_qm_dquot_logitem_push,
+	.iop_pushbuf	= xfs_qm_dquot_logitem_pushbuf,
+	.iop_committing = xfs_qm_dquot_logitem_committing
 };
 
 /*
@@ -350,10 +312,9 @@ static struct xfs_item_ops xfs_dquot_item_ops = {
  */
 void
 xfs_qm_dquot_logitem_init(
-	struct xfs_dquot *dqp)
+	struct xfs_dquot	*dqp)
 {
-	xfs_dq_logitem_t  *lp;
-	lp = &dqp->q_logitem;
+	struct xfs_dq_logitem	*lp = &dqp->q_logitem;
 
 	xfs_log_item_init(dqp->q_mount, &lp->qli_item, XFS_LI_DQUOT,
 					&xfs_dquot_item_ops);
@@ -374,16 +335,22 @@ xfs_qm_dquot_logitem_init(
 
 /*------------------  QUOTAOFF LOG ITEMS  -------------------*/
 
+static inline struct xfs_qoff_logitem *QOFF_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_qoff_logitem, qql_item);
+}
+
+
 /*
  * This returns the number of iovecs needed to log the given quotaoff item.
  * We only need 1 iovec for an quotaoff item.  It just logs the
  * quotaoff_log_format structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_qm_qoff_logitem_size(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_size(
+	struct xfs_log_item	*lip)
 {
-	return (1);
+	return 1;
 }
 
 /*
@@ -394,53 +361,46 @@ xfs_qm_qoff_logitem_size(xfs_qoff_logitem_t *qf)
  * slots in the quotaoff item have been filled.
  */
 STATIC void
-xfs_qm_qoff_logitem_format(xfs_qoff_logitem_t	*qf,
-			   xfs_log_iovec_t	*log_vector)
+xfs_qm_qoff_logitem_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	ASSERT(qf->qql_format.qf_type == XFS_LI_QUOTAOFF);
+	struct xfs_qoff_logitem	*qflip = QOFF_ITEM(lip);
+
+	ASSERT(qflip->qql_format.qf_type == XFS_LI_QUOTAOFF);
 
-	log_vector->i_addr = (xfs_caddr_t)&(qf->qql_format);
+	log_vector->i_addr = &qflip->qql_format;
 	log_vector->i_len = sizeof(xfs_qoff_logitem_t);
 	log_vector->i_type = XLOG_REG_TYPE_QUOTAOFF;
-	qf->qql_format.qf_size = 1;
+	qflip->qql_format.qf_size = 1;
 }
 
-
 /*
  * Pinning has no meaning for an quotaoff item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_pin(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * Since pinning has no meaning for an quotaoff item, unpinning does
  * not either.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_unpin(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	return;
-}
-
-/*ARGSUSED*/
-STATIC void
-xfs_qm_qoff_logitem_unpin_remove(xfs_qoff_logitem_t *qf, xfs_trans_t *tp)
-{
-	return;
 }
 
 /*
  * Quotaoff items have no locking, so just return success.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_qm_qoff_logitem_trylock(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_LOCKED;
 }
@@ -449,53 +409,51 @@ xfs_qm_qoff_logitem_trylock(xfs_qoff_logitem_t *qf)
  * Quotaoff items have no locking or pushing, so return failure
  * so that the caller doesn't bother with us.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_unlock(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_unlock(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
  * The quotaoff-start-item is logged only once and cannot be moved in the log,
  * so simply return the lsn at which it's been logged.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_qm_qoff_logitem_committed(xfs_qoff_logitem_t *qf, xfs_lsn_t lsn)
+xfs_qm_qoff_logitem_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return (lsn);
+	return lsn;
 }
 
 /*
  * There isn't much you can do to push on an quotaoff item.  It is simply
  * stuck waiting for the log to be flushed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_push(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_qm_qoffend_logitem_committed(
-	xfs_qoff_logitem_t *qfe,
-	xfs_lsn_t lsn)
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	xfs_qoff_logitem_t	*qfs;
-	struct xfs_ail		*ailp;
+	struct xfs_qoff_logitem	*qfe = QOFF_ITEM(lip);
+	struct xfs_qoff_logitem	*qfs = qfe->qql_start_lip;
+	struct xfs_ail		*ailp = qfs->qql_item.li_ailp;
 
-	qfs = qfe->qql_start_lip;
-	ailp = qfs->qql_item.li_ailp;
-	spin_lock(&ailp->xa_lock);
 	/*
 	 * Delete the qoff-start logitem from the AIL.
 	 * xfs_trans_ail_delete() drops the AIL lock.
 	 */
+	spin_lock(&ailp->xa_lock);
 	xfs_trans_ail_delete(ailp, (xfs_log_item_t *)qfs);
+
 	kmem_free(qfs);
 	kmem_free(qfe);
 	return (xfs_lsn_t)-1;
@@ -515,71 +473,52 @@ xfs_qm_qoffend_logitem_committed(
  * (truly makes the quotaoff irrevocable).  If we do something else,
  * then maybe we don't need two.
  */
-/* ARGSUSED */
-STATIC void
-xfs_qm_qoff_logitem_committing(xfs_qoff_logitem_t *qip, xfs_lsn_t commit_lsn)
-{
-	return;
-}
-
-/* ARGSUSED */
 STATIC void
-xfs_qm_qoffend_logitem_committing(xfs_qoff_logitem_t *qip, xfs_lsn_t commit_lsn)
+xfs_qm_qoff_logitem_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		commit_lsn)
 {
-	return;
 }
 
 static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_qoff_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*,xfs_trans_t*))
-					xfs_qm_qoff_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoffend_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoffend_logitem_committing
+	.iop_size	= xfs_qm_qoff_logitem_size,
+	.iop_format	= xfs_qm_qoff_logitem_format,
+	.iop_pin	= xfs_qm_qoff_logitem_pin,
+	.iop_unpin	= xfs_qm_qoff_logitem_unpin,
+	.iop_trylock	= xfs_qm_qoff_logitem_trylock,
+	.iop_unlock	= xfs_qm_qoff_logitem_unlock,
+	.iop_committed	= xfs_qm_qoffend_logitem_committed,
+	.iop_push	= xfs_qm_qoff_logitem_push,
+	.iop_committing = xfs_qm_qoff_logitem_committing
 };
 
 /*
  * This is the ops vector shared by all quotaoff-start log items.
  */
 static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_qoff_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*,xfs_trans_t*))
-					xfs_qm_qoff_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoff_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoff_logitem_committing
+	.iop_size	= xfs_qm_qoff_logitem_size,
+	.iop_format	= xfs_qm_qoff_logitem_format,
+	.iop_pin	= xfs_qm_qoff_logitem_pin,
+	.iop_unpin	= xfs_qm_qoff_logitem_unpin,
+	.iop_trylock	= xfs_qm_qoff_logitem_trylock,
+	.iop_unlock	= xfs_qm_qoff_logitem_unlock,
+	.iop_committed	= xfs_qm_qoff_logitem_committed,
+	.iop_push	= xfs_qm_qoff_logitem_push,
+	.iop_committing = xfs_qm_qoff_logitem_committing
 };
 
 /*
  * Allocate and initialize an quotaoff item of the correct quota type(s).
  */
-xfs_qoff_logitem_t *
+struct xfs_qoff_logitem *
 xfs_qm_qoff_logitem_init(
-	struct xfs_mount *mp,
-	xfs_qoff_logitem_t *start,
-	uint flags)
+	struct xfs_mount	*mp,
+	struct xfs_qoff_logitem	*start,
+	uint			flags)
 {
-	xfs_qoff_logitem_t	*qf;
+	struct xfs_qoff_logitem	*qf;
 
-	qf = (xfs_qoff_logitem_t*) kmem_zalloc(sizeof(xfs_qoff_logitem_t), KM_SLEEP);
+	qf = kmem_zalloc(sizeof(struct xfs_qoff_logitem), KM_SLEEP);
 
 	xfs_log_item_init(mp, &qf->qql_item, XFS_LI_QUOTAOFF, start ?
 			&xfs_qm_qoffend_logitem_ops : &xfs_qm_qoff_logitem_ops);
@@ -587,5 +526,5 @@ xfs_qm_qoff_logitem_init(
 	qf->qql_format.qf_type = XFS_LI_QUOTAOFF;
 	qf->qql_format.qf_flags = flags;
 	qf->qql_start_lip = start;
-	return (qf);
+	return qf;
 }
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 38e76414664..9a92407109a 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -23,25 +23,18 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_bmap.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -69,7 +62,7 @@ STATIC void	xfs_qm_list_destroy(xfs_dqlist_t *);
 
 STATIC int	xfs_qm_init_quotainos(xfs_mount_t *);
 STATIC int	xfs_qm_init_quotainfo(xfs_mount_t *);
-STATIC int	xfs_qm_shake(int, gfp_t);
+STATIC int	xfs_qm_shake(struct shrinker *, int, gfp_t);
 
 static struct shrinker xfs_qm_shaker = {
 	.shrink = xfs_qm_shake,
@@ -249,8 +242,10 @@ xfs_qm_hold_quotafs_ref(
 
 	if (!xfs_Gqm) {
 		xfs_Gqm = xfs_Gqm_init();
-		if (!xfs_Gqm)
+		if (!xfs_Gqm) {
+			mutex_unlock(&xfs_Gqm_lock);
 			return ENOMEM;
+		}
 	}
 
 	/*
@@ -1495,7 +1490,7 @@ xfs_qm_dqiterate(
 				  maxlblkcnt - lblkno,
 				  XFS_BMAPI_METADATA,
 				  NULL,
-				  0, map, &nmaps, NULL, NULL);
+				  0, map, &nmaps, NULL);
 		xfs_iunlock(qip, XFS_ILOCK_SHARED);
 		if (error)
 			break;
@@ -1630,10 +1625,7 @@ xfs_qm_dqusage_adjust(
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* not used */
 	int		ubsize,		/* not used */
-	void		*private_data,	/* not used */
-	xfs_daddr_t	bno,		/* starting block of inode cluster */
 	int		*ubused,	/* not used */
-	void		*dip,		/* on-disk inode pointer (not used) */
 	int		*res)		/* result code value */
 {
 	xfs_inode_t	*ip;
@@ -1658,7 +1650,7 @@ xfs_qm_dqusage_adjust(
 	 * the case in all other instances. It's OK that we do this because
 	 * quotacheck is done only at mount time.
 	 */
-	if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip, bno))) {
+	if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip))) {
 		*res = BULKSTAT_RV_NOTHING;
 		return error;
 	}
@@ -1670,7 +1662,8 @@ xfs_qm_dqusage_adjust(
 	 * making us disable quotas for the file system.
 	 */
 	if ((error = xfs_qm_dqget_noattach(ip, &udqp, &gdqp))) {
-		xfs_iput(ip, XFS_ILOCK_EXCL);
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+		IRELE(ip);
 		*res = BULKSTAT_RV_GIVEUP;
 		return error;
 	}
@@ -1683,7 +1676,8 @@ xfs_qm_dqusage_adjust(
 		 * Walk thru the extent list and count the realtime blocks.
 		 */
 		if ((error = xfs_qm_get_rtblks(ip, &rtblks))) {
-			xfs_iput(ip, XFS_ILOCK_EXCL);
+			xfs_iunlock(ip, XFS_ILOCK_EXCL);
+			IRELE(ip);
 			if (udqp)
 				xfs_qm_dqput(udqp);
 			if (gdqp)
@@ -1794,12 +1788,13 @@ xfs_qm_quotacheck(
 		 * Iterate thru all the inodes in the file system,
 		 * adjusting the corresponding dquot counters in core.
 		 */
-		if ((error = xfs_bulkstat(mp, &lastino, &count,
-				     xfs_qm_dqusage_adjust, NULL,
-				     structsz, NULL, BULKSTAT_FG_IGET, &done)))
+		error = xfs_bulkstat(mp, &lastino, &count,
+				     xfs_qm_dqusage_adjust,
+				     structsz, NULL, &done);
+		if (error)
 			break;
 
-	} while (! done);
+	} while (!done);
 
 	/*
 	 * We've made all the changes that we need to make incore.
@@ -1887,14 +1882,14 @@ xfs_qm_init_quotainos(
 		    mp->m_sb.sb_uquotino != NULLFSINO) {
 			ASSERT(mp->m_sb.sb_uquotino > 0);
 			if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
-					     0, 0, &uip, 0)))
+					     0, 0, &uip)))
 				return XFS_ERROR(error);
 		}
 		if (XFS_IS_OQUOTA_ON(mp) &&
 		    mp->m_sb.sb_gquotino != NULLFSINO) {
 			ASSERT(mp->m_sb.sb_gquotino > 0);
 			if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
-					     0, 0, &gip, 0))) {
+					     0, 0, &gip))) {
 				if (uip)
 					IRELE(uip);
 				return XFS_ERROR(error);
@@ -2117,7 +2112,10 @@ xfs_qm_shake_freelist(
  */
 /* ARGSUSED */
 STATIC int
-xfs_qm_shake(int nr_to_scan, gfp_t gfp_mask)
+xfs_qm_shake(
+	struct shrinker	*shrink,
+	int		nr_to_scan,
+	gfp_t		gfp_mask)
 {
 	int	ndqused, nfree, n;
 
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 97b410c1279..bea02d786c5 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/quota/xfs_qm_stats.c
index 3d1fc79532e..8671a0b3264 100644
--- a/fs/xfs/quota/xfs_qm_stats.c
+++ b/fs/xfs/quota/xfs_qm_stats.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 92b002f1805..d257eb8557c 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -26,25 +26,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -248,40 +238,74 @@ out_unlock:
 	return error;
 }
 
+STATIC int
+xfs_qm_scall_trunc_qfile(
+	struct xfs_mount	*mp,
+	xfs_ino_t		ino)
+{
+	struct xfs_inode	*ip;
+	struct xfs_trans	*tp;
+	int			error;
+
+	if (ino == NULLFSINO)
+		return 0;
+
+	error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
+	if (error)
+		return error;
+
+	xfs_ilock(ip, XFS_IOLOCK_EXCL);
+
+	tp = xfs_trans_alloc(mp, XFS_TRANS_TRUNCATE_FILE);
+	error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
+				  XFS_TRANS_PERM_LOG_RES,
+				  XFS_ITRUNCATE_LOG_COUNT);
+	if (error) {
+		xfs_trans_cancel(tp, 0);
+		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
+		goto out_put;
+	}
+
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin(tp, ip);
+
+	error = xfs_itruncate_finish(&tp, ip, 0, XFS_DATA_FORK, 1);
+	if (error) {
+		xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
+				     XFS_TRANS_ABORT);
+		goto out_unlock;
+	}
+
+	xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+
+out_unlock:
+	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+out_put:
+	IRELE(ip);
+	return error;
+}
+
 int
 xfs_qm_scall_trunc_qfiles(
 	xfs_mount_t	*mp,
 	uint		flags)
 {
 	int		error = 0, error2 = 0;
-	xfs_inode_t	*qip;
 
 	if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) {
 		qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags);
 		return XFS_ERROR(EINVAL);
 	}
 
-	if ((flags & XFS_DQ_USER) && mp->m_sb.sb_uquotino != NULLFSINO) {
-		error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino, 0, 0, &qip, 0);
-		if (!error) {
-			error = xfs_truncate_file(mp, qip);
-			IRELE(qip);
-		}
-	}
-
-	if ((flags & (XFS_DQ_GROUP|XFS_DQ_PROJ)) &&
-	    mp->m_sb.sb_gquotino != NULLFSINO) {
-		error2 = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip, 0);
-		if (!error2) {
-			error2 = xfs_truncate_file(mp, qip);
-			IRELE(qip);
-		}
-	}
+	if (flags & XFS_DQ_USER)
+		error = xfs_qm_scall_trunc_qfile(mp, mp->m_sb.sb_uquotino);
+	if (flags & (XFS_DQ_GROUP|XFS_DQ_PROJ))
+		error2 = xfs_qm_scall_trunc_qfile(mp, mp->m_sb.sb_gquotino);
 
 	return error ? error : error2;
 }
 
-
 /*
  * Switch on (a given) quota enforcement for a filesystem.  This takes
  * effect immediately.
@@ -417,12 +441,12 @@ xfs_qm_scall_getqstat(
 	}
 	if (!uip && mp->m_sb.sb_uquotino != NULLFSINO) {
 		if (xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
-					0, 0, &uip, 0) == 0)
+					0, 0, &uip) == 0)
 			tempuqip = B_TRUE;
 	}
 	if (!gip && mp->m_sb.sb_gquotino != NULLFSINO) {
 		if (xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
-					0, 0, &gip, 0) == 0)
+					0, 0, &gip) == 0)
 			tempgqip = B_TRUE;
 	}
 	if (uip) {
@@ -875,8 +899,9 @@ xfs_dqrele_inode(
 		xfs_qm_dqrele(ip->i_gdquot);
 		ip->i_gdquot = NULL;
 	}
-	xfs_iput(ip, XFS_ILOCK_EXCL);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
+	IRELE(ip);
 	return 0;
 }
 
@@ -1109,10 +1134,7 @@ xfs_qm_internalqcheck_adjust(
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* not used */
 	int		ubsize,		/* not used */
-	void		*private_data,	/* not used */
-	xfs_daddr_t	bno,		/* starting block of inode cluster */
 	int		*ubused,	/* not used */
-	void		*dip,		/* not used */
 	int		*res)		/* bulkstat result code */
 {
 	xfs_inode_t		*ip;
@@ -1134,7 +1156,7 @@ xfs_qm_internalqcheck_adjust(
 	ipreleased = B_FALSE;
  again:
 	lock_flags = XFS_ILOCK_SHARED;
-	if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip, bno))) {
+	if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip))) {
 		*res = BULKSTAT_RV_NOTHING;
 		return (error);
 	}
@@ -1146,7 +1168,8 @@ xfs_qm_internalqcheck_adjust(
 	 * of those now.
 	 */
 	if (! ipreleased) {
-		xfs_iput(ip, lock_flags);
+		xfs_iunlock(ip, lock_flags);
+		IRELE(ip);
 		ipreleased = B_TRUE;
 		goto again;
 	}
@@ -1163,7 +1186,8 @@ xfs_qm_internalqcheck_adjust(
 		ASSERT(gd);
 		xfs_qm_internalqcheck_dqadjust(ip, gd);
 	}
-	xfs_iput(ip, lock_flags);
+	xfs_iunlock(ip, lock_flags);
+	IRELE(ip);
 	*res = BULKSTAT_RV_DIDONE;
 	return (0);
 }
@@ -1205,15 +1229,15 @@ xfs_qm_internalqcheck(
 		 * Iterate thru all the inodes in the file system,
 		 * adjusting the corresponding dquot counters
 		 */
-		if ((error = xfs_bulkstat(mp, &lastino, &count,
-				 xfs_qm_internalqcheck_adjust, NULL,
-				 0, NULL, BULKSTAT_FG_IGET, &done))) {
+		error = xfs_bulkstat(mp, &lastino, &count,
+				 xfs_qm_internalqcheck_adjust,
+				 0, NULL, &done);
+		if (error) {
+			cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
 			break;
 		}
-	} while (! done);
-	if (error) {
-		cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
-	}
+	} while (!done);
+
 	cmn_err(CE_DEBUG, "Checking results against system dquots");
 	for (i = 0; i < qmtest_hashmask; i++) {
 		xfs_dqtest_t	*d, *n;
diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/quota/xfs_trans_dquot.c
index 061d827da33..7de91d1b75c 100644
--- a/fs/xfs/quota/xfs_trans_dquot.c
+++ b/fs/xfs/quota/xfs_trans_dquot.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -59,16 +49,14 @@ xfs_trans_dqjoin(
 	xfs_trans_t	*tp,
 	xfs_dquot_t	*dqp)
 {
-	xfs_dq_logitem_t    *lp = &dqp->q_logitem;
-
 	ASSERT(dqp->q_transp != tp);
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(lp->qli_dquot == dqp);
+	ASSERT(dqp->q_logitem.qli_dquot == dqp);
 
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)(lp));
+	xfs_trans_add_item(tp, &dqp->q_logitem.qli_item);
 
 	/*
 	 * Initialize i_transp so we can later determine if this dquot is
@@ -93,16 +81,11 @@ xfs_trans_log_dquot(
 	xfs_trans_t	*tp,
 	xfs_dquot_t	*dqp)
 {
-	xfs_log_item_desc_t	*lidp;
-
 	ASSERT(dqp->q_transp == tp);
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)(&dqp->q_logitem));
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	dqp->q_logitem.qli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 }
 
 /*
@@ -874,9 +857,8 @@ xfs_trans_get_qoff_item(
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)q);
-
-	return (q);
+	xfs_trans_add_item(tp, &q->qql_item);
+	return q;
 }
 
 
@@ -890,13 +872,8 @@ xfs_trans_log_quotaoff_item(
 	xfs_trans_t		*tp,
 	xfs_qoff_logitem_t	*qlp)
 {
-	xfs_log_item_desc_t	*lidp;
-
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t *)qlp);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	qlp->qql_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 }
 
 STATIC void
diff --git a/fs/xfs/support/debug.c b/fs/xfs/support/debug.c
index 3f3610a7ee0..975aa10e1a4 100644
--- a/fs/xfs/support/debug.c
+++ b/fs/xfs/support/debug.c
@@ -22,7 +22,6 @@
 #include "xfs_sb.h"
 #include "xfs_inum.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index 401f364ad36..4917d4eed4e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -227,7 +227,6 @@ typedef struct xfs_perag {
 
 	atomic_t        pagf_fstrms;    /* # of filestreams active in this AG */
 
-	int		pag_ici_init;	/* incore inode cache initialised */
 	rwlock_t	pag_ici_lock;	/* incore inode lock */
 	struct radix_tree_root pag_ici_root;	/* incore inode cache root */
 	int		pag_ici_reclaimable;	/* reclaimable inodes */
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index a7fbe8a99b1..af168faccc7 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -24,18 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
@@ -688,8 +683,6 @@ xfs_alloc_ag_vextent_near(
 	xfs_agblock_t	ltbno;		/* start bno of left side entry */
 	xfs_agblock_t	ltbnoa;		/* aligned ... */
 	xfs_extlen_t	ltdiff;		/* difference to left side entry */
-	/*REFERENCED*/
-	xfs_agblock_t	ltend;		/* end bno of left side entry */
 	xfs_extlen_t	ltlen;		/* length of left side entry */
 	xfs_extlen_t	ltlena;		/* aligned ... */
 	xfs_agblock_t	ltnew;		/* useful start bno of left side */
@@ -814,8 +807,7 @@ xfs_alloc_ag_vextent_near(
 		if ((error = xfs_alloc_get_rec(cnt_cur, &ltbno, &ltlen, &i)))
 			goto error0;
 		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-		ltend = ltbno + ltlen;
-		ASSERT(ltend <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
+		ASSERT(ltbno + ltlen <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
 		args->len = blen;
 		if (!xfs_alloc_fix_minleft(args)) {
 			xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
@@ -828,7 +820,7 @@ xfs_alloc_ag_vextent_near(
 		 */
 		args->agbno = bnew;
 		ASSERT(bnew >= ltbno);
-		ASSERT(bnew + blen <= ltend);
+		ASSERT(bnew + blen <= ltbno + ltlen);
 		/*
 		 * Set up a cursor for the by-bno tree.
 		 */
@@ -1157,7 +1149,6 @@ xfs_alloc_ag_vextent_near(
 	/*
 	 * Fix up the length and compute the useful address.
 	 */
-	ltend = ltbno + ltlen;
 	args->len = XFS_EXTLEN_MIN(ltlena, args->maxlen);
 	xfs_alloc_fix_len(args);
 	if (!xfs_alloc_fix_minleft(args)) {
@@ -1170,7 +1161,7 @@ xfs_alloc_ag_vextent_near(
 	(void)xfs_alloc_compute_diff(args->agbno, rlen, args->alignment, ltbno,
 		ltlen, &ltnew);
 	ASSERT(ltnew >= ltbno);
-	ASSERT(ltnew + rlen <= ltend);
+	ASSERT(ltnew + rlen <= ltbno + ltlen);
 	ASSERT(ltnew + rlen <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
 	args->agbno = ltnew;
 	if ((error = xfs_alloc_fixup_trees(cnt_cur, bno_cur_lt, ltbno, ltlen,
diff --git a/fs/xfs/xfs_alloc.h b/fs/xfs/xfs_alloc.h
index 6d05199b667..895009a9727 100644
--- a/fs/xfs/xfs_alloc.h
+++ b/fs/xfs/xfs_alloc.h
@@ -27,16 +27,16 @@ struct xfs_busy_extent;
 /*
  * Freespace allocation types.  Argument to xfs_alloc_[v]extent.
  */
-typedef enum xfs_alloctype
-{
-	XFS_ALLOCTYPE_ANY_AG,		/* allocate anywhere, use rotor */
-	XFS_ALLOCTYPE_FIRST_AG,		/* ... start at ag 0 */
-	XFS_ALLOCTYPE_START_AG,		/* anywhere, start in this a.g. */
-	XFS_ALLOCTYPE_THIS_AG,		/* anywhere in this a.g. */
-	XFS_ALLOCTYPE_START_BNO,	/* near this block else anywhere */
-	XFS_ALLOCTYPE_NEAR_BNO,		/* in this a.g. and near this block */
-	XFS_ALLOCTYPE_THIS_BNO		/* at exactly this block */
-} xfs_alloctype_t;
+#define XFS_ALLOCTYPE_ANY_AG	0x01	/* allocate anywhere, use rotor */
+#define XFS_ALLOCTYPE_FIRST_AG	0x02	/* ... start at ag 0 */
+#define XFS_ALLOCTYPE_START_AG	0x04	/* anywhere, start in this a.g. */
+#define XFS_ALLOCTYPE_THIS_AG	0x08	/* anywhere in this a.g. */
+#define XFS_ALLOCTYPE_START_BNO	0x10	/* near this block else anywhere */
+#define XFS_ALLOCTYPE_NEAR_BNO	0x20	/* in this a.g. and near this block */
+#define XFS_ALLOCTYPE_THIS_BNO	0x40	/* at exactly this block */
+
+/* this should become an enum again when the tracing code is fixed */
+typedef unsigned int xfs_alloctype_t;
 
 #define XFS_ALLOC_TYPES \
 	{ XFS_ALLOCTYPE_ANY_AG,		"ANY_AG" }, \
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index 83f49421875..97f7328967f 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -24,19 +24,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index b9c196a53c4..c2568242a90 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -25,19 +25,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_attr.h"
@@ -325,8 +319,7 @@ xfs_attr_set_int(
 		return (error);
 	}
 
-	xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(args.trans, dp);
+	xfs_trans_ijoin(args.trans, dp);
 
 	/*
 	 * If the attribute list is non-existent or a shortform list,
@@ -396,10 +389,8 @@ xfs_attr_set_int(
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args.trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args.trans, dp);
 
 		/*
 		 * Commit the leaf transformation.  We'll need another (linked)
@@ -544,8 +535,7 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags)
 	 * No need to make quota reservations here. We expect to release some
 	 * blocks not allocate in the common case.
 	 */
-	xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(args.trans, dp);
+	xfs_trans_ijoin(args.trans, dp);
 
 	/*
 	 * Decide on what work routines to call based on the inode size.
@@ -821,8 +811,7 @@ xfs_attr_inactive(xfs_inode_t *dp)
 	 * No need to make quota reservations here. We expect to release some
 	 * blocks, not allocate, in the common case.
 	 */
-	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(trans, dp);
+	xfs_trans_ijoin(trans, dp);
 
 	/*
 	 * Decide on what work routines to call based on the inode size.
@@ -981,10 +970,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		/*
 		 * Commit the current trans (including the inode) and start
@@ -1085,10 +1072,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		} else
 			xfs_da_buf_done(bp);
 
@@ -1161,10 +1146,8 @@ xfs_attr_leaf_removename(xfs_da_args_t *args)
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 	} else
 		xfs_da_buf_done(bp);
 	return(0);
@@ -1317,10 +1300,8 @@ restart:
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 
 			/*
 			 * Commit the node conversion and start the next
@@ -1356,10 +1337,8 @@ restart:
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 	} else {
 		/*
 		 * Addition succeeded, update Btree hashvals.
@@ -1470,10 +1449,8 @@ restart:
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		}
 
 		/*
@@ -1604,10 +1581,8 @@ xfs_attr_node_removename(xfs_da_args_t *args)
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		/*
 		 * Commit the Btree join operation and start a new trans.
@@ -1658,10 +1633,8 @@ xfs_attr_node_removename(xfs_da_args_t *args)
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		} else
 			xfs_da_brelse(args->trans, bp);
 	}
@@ -2004,7 +1977,7 @@ xfs_attr_rmtval_get(xfs_da_args_t *args)
 		error = xfs_bmapi(args->trans, args->dp, (xfs_fileoff_t)lblkno,
 				  args->rmtblkcnt,
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
-				  NULL, 0, map, &nmap, NULL, NULL);
+				  NULL, 0, map, &nmap, NULL);
 		if (error)
 			return(error);
 		ASSERT(nmap >= 1);
@@ -2083,7 +2056,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA |
 							XFS_BMAPI_WRITE,
 				  args->firstblock, args->total, &map, &nmap,
-				  args->flist, NULL);
+				  args->flist);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
 						&committed);
@@ -2099,10 +2072,8 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		ASSERT(nmap == 1);
 		ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
@@ -2136,7 +2107,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 				  args->rmtblkcnt,
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				  args->firstblock, 0, &map, &nmap,
-				  NULL, NULL);
+				  NULL);
 		if (error) {
 			return(error);
 		}
@@ -2201,7 +2172,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 					args->rmtblkcnt,
 					XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 					args->firstblock, 0, &map, &nmap,
-					args->flist, NULL);
+					args->flist);
 		if (error) {
 			return(error);
 		}
@@ -2239,7 +2210,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 		error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
 				    XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				    1, args->firstblock, args->flist,
-				    NULL, &done);
+				    &done);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
 						&committed);
@@ -2255,10 +2226,8 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, args->dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, args->dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, args->dp);
 
 		/*
 		 * Close out trans and start the next one in the chain.
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index a90ce74fc25..a6cff8edcdb 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -24,8 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
@@ -33,7 +31,6 @@
 #include "xfs_ialloc_btree.h"
 #include "xfs_alloc.h"
 #include "xfs_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -2931,7 +2928,7 @@ xfs_attr_leaf_freextent(xfs_trans_t **trans, xfs_inode_t *dp,
 		nmap = 1;
 		error = xfs_bmapi(*trans, dp, (xfs_fileoff_t)tblkno, tblkcnt,
 					XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
-					NULL, 0, &map, &nmap, NULL, NULL);
+					NULL, 0, &map, &nmap, NULL);
 		if (error) {
 			return(error);
 		}
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 99587ded043..23f14e595c1 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -30,13 +30,10 @@
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_dir2_data.h"
 #include "xfs_dir2_leaf.h"
@@ -104,7 +101,6 @@ xfs_bmap_add_extent(
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
@@ -122,7 +118,6 @@ xfs_bmap_add_extent_delay_real(
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
 /*
@@ -135,7 +130,6 @@ xfs_bmap_add_extent_hole_delay(
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp,/* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
 /*
@@ -149,7 +143,6 @@ xfs_bmap_add_extent_hole_real(
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork); /* data or attr fork */
 
 /*
@@ -162,8 +155,7 @@ xfs_bmap_add_extent_unwritten_real(
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_btree_cur_t		**curp,	/* if *curp is null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
-	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta); /* Change made to incore extents */
+	int			*logflagsp); /* inode logging flags */
 
 /*
  * xfs_bmap_alloc is called by xfs_bmapi to allocate an extent for a file.
@@ -200,7 +192,6 @@ xfs_bmap_del_extent(
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp,/* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd);	 /* OK to allocate reserved blocks */
 
@@ -489,7 +480,6 @@ xfs_bmap_add_extent(
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd)	/* OK to use reserved data blocks */
 {
@@ -524,15 +514,6 @@ xfs_bmap_add_extent(
 			logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else
 			logflags = 0;
-		/* DELTA: single new extent */
-		if (delta) {
-			if (delta->xed_startoff > new->br_startoff)
-				delta->xed_startoff = new->br_startoff;
-			if (delta->xed_blockcount <
-					new->br_startoff + new->br_blockcount)
-				delta->xed_blockcount = new->br_startoff +
-						new->br_blockcount;
-		}
 	}
 	/*
 	 * Any kind of new delayed allocation goes here.
@@ -542,7 +523,7 @@ xfs_bmap_add_extent(
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
 		if ((error = xfs_bmap_add_extent_hole_delay(ip, idx, new,
-				&logflags, delta, rsvd)))
+				&logflags, rsvd)))
 			goto done;
 	}
 	/*
@@ -553,7 +534,7 @@ xfs_bmap_add_extent(
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
 		if ((error = xfs_bmap_add_extent_hole_real(ip, idx, cur, new,
-				&logflags, delta, whichfork)))
+				&logflags, whichfork)))
 			goto done;
 	} else {
 		xfs_bmbt_irec_t	prev;	/* old extent at offset idx */
@@ -578,17 +559,17 @@ xfs_bmap_add_extent(
 						XFS_BTCUR_BPRV_WASDEL);
 				if ((error = xfs_bmap_add_extent_delay_real(ip,
 					idx, &cur, new, &da_new, first, flist,
-					&logflags, delta, rsvd)))
+					&logflags, rsvd)))
 					goto done;
 			} else if (new->br_state == XFS_EXT_NORM) {
 				ASSERT(new->br_state == XFS_EXT_NORM);
 				if ((error = xfs_bmap_add_extent_unwritten_real(
-					ip, idx, &cur, new, &logflags, delta)))
+					ip, idx, &cur, new, &logflags)))
 					goto done;
 			} else {
 				ASSERT(new->br_state == XFS_EXT_UNWRITTEN);
 				if ((error = xfs_bmap_add_extent_unwritten_real(
-					ip, idx, &cur, new, &logflags, delta)))
+					ip, idx, &cur, new, &logflags)))
 					goto done;
 			}
 			ASSERT(*curp == cur || *curp == NULL);
@@ -601,7 +582,7 @@ xfs_bmap_add_extent(
 				ASSERT((cur->bc_private.b.flags &
 					XFS_BTCUR_BPRV_WASDEL) == 0);
 			if ((error = xfs_bmap_add_extent_hole_real(ip, idx, cur,
-					new, &logflags, delta, whichfork)))
+					new, &logflags, whichfork)))
 				goto done;
 		}
 	}
@@ -666,7 +647,6 @@ xfs_bmap_add_extent_delay_real(
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd)	/* OK to use reserved data block allocation */
 {
 	xfs_btree_cur_t		*cur;	/* btree cursor */
@@ -797,11 +777,6 @@ xfs_bmap_add_extent_delay_real(
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Three in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_LEFT_CONTIG:
@@ -832,10 +807,6 @@ xfs_bmap_add_extent_delay_real(
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -867,10 +838,6 @@ xfs_bmap_add_extent_delay_real(
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING:
@@ -900,9 +867,6 @@ xfs_bmap_add_extent_delay_real(
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		*dnew = 0;
-		/* DELTA: The in-core extent described by new changed type. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG:
@@ -942,10 +906,6 @@ xfs_bmap_add_extent_delay_real(
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING:
@@ -990,9 +950,6 @@ xfs_bmap_add_extent_delay_real(
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx + 1, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1031,10 +988,6 @@ xfs_bmap_add_extent_delay_real(
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING:
@@ -1078,9 +1031,6 @@ xfs_bmap_add_extent_delay_real(
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case 0:
@@ -1161,9 +1111,6 @@ xfs_bmap_add_extent_delay_real(
 			nullstartblock((int)temp2));
 		trace_xfs_bmap_post_update(ip, idx + 2, state, _THIS_IP_);
 		*dnew = temp + temp2;
-		/* DELTA: One in-core extent is split in three. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG | BMAP_RIGHT_CONTIG:
@@ -1179,13 +1126,6 @@ xfs_bmap_add_extent_delay_real(
 		ASSERT(0);
 	}
 	*curp = cur;
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -1204,8 +1144,7 @@ xfs_bmap_add_extent_unwritten_real(
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_btree_cur_t		**curp,	/* if *curp is null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
-	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta) /* Change made to incore extents */
+	int			*logflagsp) /* inode logging flags */
 {
 	xfs_btree_cur_t		*cur;	/* btree cursor */
 	xfs_bmbt_rec_host_t	*ep;	/* extent entry for idx */
@@ -1219,8 +1158,6 @@ xfs_bmap_add_extent_unwritten_real(
 					/* left is 0, right is 1, prev is 2 */
 	int			rval=0;	/* return value (logging flags) */
 	int			state = 0;/* state bits, accessed thru macros */
-	xfs_filblks_t		temp=0;
-	xfs_filblks_t		temp2=0;
 
 #define	LEFT		r[0]
 #define	RIGHT		r[1]
@@ -1341,11 +1278,6 @@ xfs_bmap_add_extent_unwritten_real(
 				RIGHT.br_blockcount, LEFT.br_state)))
 				goto done;
 		}
-		/* DELTA: Three in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_LEFT_CONTIG:
@@ -1382,10 +1314,6 @@ xfs_bmap_add_extent_unwritten_real(
 				LEFT.br_state)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1422,10 +1350,6 @@ xfs_bmap_add_extent_unwritten_real(
 				newext)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING:
@@ -1453,9 +1377,6 @@ xfs_bmap_add_extent_unwritten_real(
 				newext)))
 				goto done;
 		}
-		/* DELTA: The in-core extent described by new changed type. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG:
@@ -1501,10 +1422,6 @@ xfs_bmap_add_extent_unwritten_real(
 				LEFT.br_state))
 				goto done;
 		}
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING:
@@ -1544,9 +1461,6 @@ xfs_bmap_add_extent_unwritten_real(
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1587,10 +1501,6 @@ xfs_bmap_add_extent_unwritten_real(
 				newext)))
 				goto done;
 		}
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING:
@@ -1630,9 +1540,6 @@ xfs_bmap_add_extent_unwritten_real(
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case 0:
@@ -1692,9 +1599,6 @@ xfs_bmap_add_extent_unwritten_real(
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in three. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG | BMAP_RIGHT_CONTIG:
@@ -1710,13 +1614,6 @@ xfs_bmap_add_extent_unwritten_real(
 		ASSERT(0);
 	}
 	*curp = cur;
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -1736,7 +1633,6 @@ xfs_bmap_add_extent_hole_delay(
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd)		/* OK to allocate reserved blocks */
 {
 	xfs_bmbt_rec_host_t	*ep;	/* extent record for idx */
@@ -1747,7 +1643,6 @@ xfs_bmap_add_extent_hole_delay(
 	xfs_bmbt_irec_t		right;	/* right neighbor extent entry */
 	int			state;  /* state bits, accessed thru macros */
 	xfs_filblks_t		temp=0;	/* temp for indirect calculations */
-	xfs_filblks_t		temp2=0;
 
 	ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 	ep = xfs_iext_get_ext(ifp, idx);
@@ -1819,9 +1714,6 @@ xfs_bmap_add_extent_hole_delay(
 
 		xfs_iext_remove(ip, idx, 1, state);
 		ip->i_df.if_lastex = idx - 1;
-		/* DELTA: Two in-core extents were replaced by one. */
-		temp2 = temp;
-		temp = left.br_startoff;
 		break;
 
 	case BMAP_LEFT_CONTIG:
@@ -1841,9 +1733,6 @@ xfs_bmap_add_extent_hole_delay(
 		trace_xfs_bmap_post_update(ip, idx - 1, state, _THIS_IP_);
 
 		ip->i_df.if_lastex = idx - 1;
-		/* DELTA: One in-core extent grew into a hole. */
-		temp2 = temp;
-		temp = left.br_startoff;
 		break;
 
 	case BMAP_RIGHT_CONTIG:
@@ -1862,9 +1751,6 @@ xfs_bmap_add_extent_hole_delay(
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 
 		ip->i_df.if_lastex = idx;
-		/* DELTA: One in-core extent grew into a hole. */
-		temp2 = temp;
-		temp = new->br_startoff;
 		break;
 
 	case 0:
@@ -1876,9 +1762,6 @@ xfs_bmap_add_extent_hole_delay(
 		oldlen = newlen = 0;
 		xfs_iext_insert(ip, idx, 1, new, state);
 		ip->i_df.if_lastex = idx;
-		/* DELTA: A new in-core extent was added in a hole. */
-		temp2 = new->br_blockcount;
-		temp = new->br_startoff;
 		break;
 	}
 	if (oldlen != newlen) {
@@ -1889,13 +1772,6 @@ xfs_bmap_add_extent_hole_delay(
 		 * Nothing to do for disk quota accounting here.
 		 */
 	}
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 	*logflagsp = 0;
 	return 0;
 }
@@ -1911,7 +1787,6 @@ xfs_bmap_add_extent_hole_real(
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork) /* data or attr fork */
 {
 	xfs_bmbt_rec_host_t	*ep;	/* pointer to extent entry ins. point */
@@ -1922,8 +1797,6 @@ xfs_bmap_add_extent_hole_real(
 	xfs_bmbt_irec_t		right;	/* right neighbor extent entry */
 	int			rval=0;	/* return value (logging flags) */
 	int			state;	/* state bits, accessed thru macros */
-	xfs_filblks_t		temp=0;
-	xfs_filblks_t		temp2=0;
 
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	ASSERT(idx <= ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t));
@@ -2020,11 +1893,6 @@ xfs_bmap_add_extent_hole_real(
 					left.br_state)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents were replaced by one. */
-		temp = left.br_startoff;
-		temp2 = left.br_blockcount +
-			new->br_blockcount +
-			right.br_blockcount;
 		break;
 
 	case BMAP_LEFT_CONTIG:
@@ -2056,10 +1924,6 @@ xfs_bmap_add_extent_hole_real(
 					left.br_state)))
 				goto done;
 		}
-		/* DELTA: One in-core extent grew. */
-		temp = left.br_startoff;
-		temp2 = left.br_blockcount +
-			new->br_blockcount;
 		break;
 
 	case BMAP_RIGHT_CONTIG:
@@ -2092,10 +1956,6 @@ xfs_bmap_add_extent_hole_real(
 					right.br_state)))
 				goto done;
 		}
-		/* DELTA: One in-core extent grew. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount +
-			right.br_blockcount;
 		break;
 
 	case 0:
@@ -2123,18 +1983,8 @@ xfs_bmap_add_extent_hole_real(
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: A new extent was added in a hole. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 	}
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -2959,7 +2809,6 @@ xfs_bmap_del_extent(
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*del,	/* data to remove from extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd)	/* OK to allocate reserved blocks */
 {
@@ -3265,14 +3114,6 @@ xfs_bmap_del_extent(
 	if (da_old > da_new)
 		xfs_mod_incore_sb(mp, XFS_SBS_FDBLOCKS, (int64_t)(da_old - da_new),
 			rsvd);
-	if (delta) {
-		/* DELTA: report the original extent. */
-		if (delta->xed_startoff > got.br_startoff)
-			delta->xed_startoff = got.br_startoff;
-		if (delta->xed_blockcount < got.br_startoff+got.br_blockcount)
-			delta->xed_blockcount = got.br_startoff +
-							got.br_blockcount;
-	}
 done:
 	*logflagsp = flags;
 	return error;
@@ -3754,9 +3595,10 @@ xfs_bmap_add_attrfork(
 		ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
 	}
 	ASSERT(ip->i_d.di_anextents == 0);
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+
 	switch (ip->i_d.di_format) {
 	case XFS_DINODE_FMT_DEV:
 		ip->i_d.di_forkoff = roundup(sizeof(xfs_dev_t), 8) >> 3;
@@ -4483,8 +4325,7 @@ xfs_bmapi(
 	xfs_extlen_t	total,		/* total blocks needed */
 	xfs_bmbt_irec_t	*mval,		/* output: map values */
 	int		*nmap,		/* i/o: mval size/count */
-	xfs_bmap_free_t	*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t	*delta)		/* o: change made to incore extents */
+	xfs_bmap_free_t	*flist)		/* i/o: list extents to free */
 {
 	xfs_fsblock_t	abno;		/* allocated block number */
 	xfs_extlen_t	alen;		/* allocated extent length */
@@ -4596,10 +4437,7 @@ xfs_bmapi(
 	end = bno + len;
 	obno = bno;
 	bma.ip = NULL;
-	if (delta) {
-		delta->xed_startoff = NULLFILEOFF;
-		delta->xed_blockcount = 0;
-	}
+
 	while (bno < end && n < *nmap) {
 		/*
 		 * Reading past eof, act as though there's a hole
@@ -4620,19 +4458,13 @@ xfs_bmapi(
 			 * allocate the stuff asked for in this bmap call
 			 * but that wouldn't be as good.
 			 */
-			if (wasdelay && !(flags & XFS_BMAPI_EXACT)) {
+			if (wasdelay) {
 				alen = (xfs_extlen_t)got.br_blockcount;
 				aoff = got.br_startoff;
 				if (lastx != NULLEXTNUM && lastx) {
 					ep = xfs_iext_get_ext(ifp, lastx - 1);
 					xfs_bmbt_get_all(ep, &prev);
 				}
-			} else if (wasdelay) {
-				alen = (xfs_extlen_t)
-					XFS_FILBLKS_MIN(len,
-						(got.br_startoff +
-						 got.br_blockcount) - bno);
-				aoff = bno;
 			} else {
 				alen = (xfs_extlen_t)
 					XFS_FILBLKS_MIN(len, MAXEXTLEN);
@@ -4831,7 +4663,7 @@ xfs_bmapi(
 					got.br_state = XFS_EXT_UNWRITTEN;
 			}
 			error = xfs_bmap_add_extent(ip, lastx, &cur, &got,
-				firstblock, flist, &tmp_logflags, delta,
+				firstblock, flist, &tmp_logflags,
 				whichfork, (flags & XFS_BMAPI_RSVBLOCKS));
 			logflags |= tmp_logflags;
 			if (error)
@@ -4927,7 +4759,7 @@ xfs_bmapi(
 			}
 			mval->br_state = XFS_EXT_NORM;
 			error = xfs_bmap_add_extent(ip, lastx, &cur, mval,
-				firstblock, flist, &tmp_logflags, delta,
+				firstblock, flist, &tmp_logflags,
 				whichfork, (flags & XFS_BMAPI_RSVBLOCKS));
 			logflags |= tmp_logflags;
 			if (error)
@@ -5017,14 +4849,6 @@ xfs_bmapi(
 	ASSERT(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE ||
 	       XFS_IFORK_NEXTENTS(ip, whichfork) > ifp->if_ext_max);
 	error = 0;
-	if (delta && delta->xed_startoff != NULLFILEOFF) {
-		/* A change was actually made.
-		 * Note that delta->xed_blockount is an offset at this
-		 * point and needs to be converted to a block count.
-		 */
-		ASSERT(delta->xed_blockcount > delta->xed_startoff);
-		delta->xed_blockcount -= delta->xed_startoff;
-	}
 error0:
 	/*
 	 * Log everything.  Do this after conversion, there's no point in
@@ -5136,8 +4960,6 @@ xfs_bunmapi(
 	xfs_fsblock_t		*firstblock,	/* first allocated block
 						   controls a.g. for allocs */
 	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta,		/* o: change made to incore
-						   extents */
 	int			*done)		/* set if not done yet */
 {
 	xfs_btree_cur_t		*cur;		/* bmap btree cursor */
@@ -5196,10 +5018,7 @@ xfs_bunmapi(
 	bno = start + len - 1;
 	ep = xfs_bmap_search_extents(ip, bno, whichfork, &eof, &lastx, &got,
 		&prev);
-	if (delta) {
-		delta->xed_startoff = NULLFILEOFF;
-		delta->xed_blockcount = 0;
-	}
+
 	/*
 	 * Check to see if the given block number is past the end of the
 	 * file, back up to the last block if so...
@@ -5297,7 +5116,7 @@ xfs_bunmapi(
 			}
 			del.br_state = XFS_EXT_UNWRITTEN;
 			error = xfs_bmap_add_extent(ip, lastx, &cur, &del,
-				firstblock, flist, &logflags, delta,
+				firstblock, flist, &logflags,
 				XFS_DATA_FORK, 0);
 			if (error)
 				goto error0;
@@ -5352,7 +5171,7 @@ xfs_bunmapi(
 				prev.br_state = XFS_EXT_UNWRITTEN;
 				error = xfs_bmap_add_extent(ip, lastx - 1, &cur,
 					&prev, firstblock, flist, &logflags,
-					delta, XFS_DATA_FORK, 0);
+					XFS_DATA_FORK, 0);
 				if (error)
 					goto error0;
 				goto nodelete;
@@ -5361,7 +5180,7 @@ xfs_bunmapi(
 				del.br_state = XFS_EXT_UNWRITTEN;
 				error = xfs_bmap_add_extent(ip, lastx, &cur,
 					&del, firstblock, flist, &logflags,
-					delta, XFS_DATA_FORK, 0);
+					XFS_DATA_FORK, 0);
 				if (error)
 					goto error0;
 				goto nodelete;
@@ -5414,7 +5233,7 @@ xfs_bunmapi(
 			goto error0;
 		}
 		error = xfs_bmap_del_extent(ip, tp, lastx, flist, cur, &del,
-				&tmp_logflags, delta, whichfork, rsvd);
+				&tmp_logflags, whichfork, rsvd);
 		logflags |= tmp_logflags;
 		if (error)
 			goto error0;
@@ -5471,14 +5290,6 @@ nodelete:
 	ASSERT(ifp->if_ext_max ==
 	       XFS_IFORK_SIZE(ip, whichfork) / (uint)sizeof(xfs_bmbt_rec_t));
 	error = 0;
-	if (delta && delta->xed_startoff != NULLFILEOFF) {
-		/* A change was actually made.
-		 * Note that delta->xed_blockount is an offset at this
-		 * point and needs to be converted to a block count.
-		 */
-		ASSERT(delta->xed_blockcount > delta->xed_startoff);
-		delta->xed_blockcount -= delta->xed_startoff;
-	}
 error0:
 	/*
 	 * Log everything.  Do this after conversion, there's no point in
@@ -5605,28 +5416,6 @@ xfs_getbmap(
 		prealloced = 0;
 		fixlen = 1LL << 32;
 	} else {
-		/*
-		 * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
-		 * not generate a DMAPI read event.  Otherwise, if the
-		 * DM_EVENT_READ bit is set for the file, generate a read
-		 * event in order that the DMAPI application may do its thing
-		 * before we return the extents.  Usually this means restoring
-		 * user file data to regions of the file that look like holes.
-		 *
-		 * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
-		 * BMV_IF_NO_DMAPI_READ so that read events are generated.
-		 * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
-		 * could misinterpret holes in a DMAPI file as true holes,
-		 * when in fact they may represent offline user data.
-		 */
-		if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
-		    !(iflags & BMV_IF_NO_DMAPI_READ)) {
-			error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
-					      0, 0, 0, NULL);
-			if (error)
-				return XFS_ERROR(error);
-		}
-
 		if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
 		    ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
@@ -5713,7 +5502,7 @@ xfs_getbmap(
 		error = xfs_bmapi(NULL, ip, XFS_BB_TO_FSBT(mp, bmv->bmv_offset),
 				  XFS_BB_TO_FSB(mp, bmv->bmv_length),
 				  bmapi_flags, NULL, 0, map, &nmap,
-				  NULL, NULL);
+				  NULL);
 		if (error)
 			goto out_free_map;
 		ASSERT(nmap <= subnex);
@@ -5859,66 +5648,34 @@ xfs_bmap_eof(
 }
 
 #ifdef DEBUG
-STATIC
-xfs_buf_t *
+STATIC struct xfs_buf *
 xfs_bmap_get_bp(
-	xfs_btree_cur_t         *cur,
+	struct xfs_btree_cur	*cur,
 	xfs_fsblock_t		bno)
 {
-	int i;
-	xfs_buf_t *bp;
+	struct xfs_log_item_desc *lidp;
+	int			i;
 
 	if (!cur)
-		return(NULL);
-
-	bp = NULL;
-	for(i = 0; i < XFS_BTREE_MAXLEVELS; i++) {
-		bp = cur->bc_bufs[i];
-		if (!bp) break;
-		if (XFS_BUF_ADDR(bp) == bno)
-			break;	/* Found it */
-	}
-	if (i == XFS_BTREE_MAXLEVELS)
-		bp = NULL;
-
-	if (!bp) { /* Chase down all the log items to see if the bp is there */
-		xfs_log_item_chunk_t    *licp;
-		xfs_trans_t		*tp;
-
-		tp = cur->bc_tp;
-		licp = &tp->t_items;
-		while (!bp && licp != NULL) {
-			if (xfs_lic_are_all_free(licp)) {
-				licp = licp->lic_next;
-				continue;
-			}
-			for (i = 0; i < licp->lic_unused; i++) {
-				xfs_log_item_desc_t	*lidp;
-				xfs_log_item_t		*lip;
-				xfs_buf_log_item_t	*bip;
-				xfs_buf_t		*lbp;
-
-				if (xfs_lic_isfree(licp, i)) {
-					continue;
-				}
-
-				lidp = xfs_lic_slot(licp, i);
-				lip = lidp->lid_item;
-				if (lip->li_type != XFS_LI_BUF)
-					continue;
+		return NULL;
 
-				bip = (xfs_buf_log_item_t *)lip;
-				lbp = bip->bli_buf;
+	for (i = 0; i < XFS_BTREE_MAXLEVELS; i++) {
+		if (!cur->bc_bufs[i])
+			break;
+		if (XFS_BUF_ADDR(cur->bc_bufs[i]) == bno)
+			return cur->bc_bufs[i];
+	}
 
-				if (XFS_BUF_ADDR(lbp) == bno) {
-					bp = lbp;
-					break; /* Found it */
-				}
-			}
-			licp = licp->lic_next;
-		}
+	/* Chase down all the log items to see if the bp is there */
+	list_for_each_entry(lidp, &cur->bc_tp->t_items, lid_trans) {
+		struct xfs_buf_log_item	*bip;
+		bip = (struct xfs_buf_log_item *)lidp->lid_item;
+		if (bip->bli_item.li_type == XFS_LI_BUF &&
+		    XFS_BUF_ADDR(bip->bli_buf) == bno)
+			return bip->bli_buf;
 	}
-	return(bp);
+
+	return NULL;
 }
 
 STATIC void
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 419dafb9d87..b13569a6179 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -28,20 +28,6 @@ struct xfs_trans;
 extern kmem_zone_t	*xfs_bmap_free_item_zone;
 
 /*
- * DELTA: describe a change to the in-core extent list.
- *
- * Internally the use of xed_blockount is somewhat funky.
- * xed_blockcount contains an offset much of the time because this
- * makes merging changes easier.  (xfs_fileoff_t and xfs_filblks_t are
- * the same underlying type).
- */
-typedef struct xfs_extdelta
-{
-	xfs_fileoff_t		xed_startoff;	/* offset of range */
-	xfs_filblks_t		xed_blockcount;	/* blocks in range */
-} xfs_extdelta_t;
-
-/*
  * List of extents to be free "later".
  * The list is kept sorted on xbf_startblock.
  */
@@ -82,16 +68,13 @@ typedef	struct xfs_bmap_free
 #define XFS_BMAPI_DELAY		0x002	/* delayed write operation */
 #define XFS_BMAPI_ENTIRE	0x004	/* return entire extent, not trimmed */
 #define XFS_BMAPI_METADATA	0x008	/* mapping metadata not user data */
-#define XFS_BMAPI_EXACT		0x010	/* allocate only to spec'd bounds */
-#define XFS_BMAPI_ATTRFORK	0x020	/* use attribute fork not data */
-#define XFS_BMAPI_ASYNC		0x040	/* bunmapi xactions can be async */
-#define XFS_BMAPI_RSVBLOCKS	0x080	/* OK to alloc. reserved data blocks */
-#define	XFS_BMAPI_PREALLOC	0x100	/* preallocation op: unwritten space */
-#define	XFS_BMAPI_IGSTATE	0x200	/* Ignore state - */
+#define XFS_BMAPI_ATTRFORK	0x010	/* use attribute fork not data */
+#define XFS_BMAPI_RSVBLOCKS	0x020	/* OK to alloc. reserved data blocks */
+#define	XFS_BMAPI_PREALLOC	0x040	/* preallocation op: unwritten space */
+#define	XFS_BMAPI_IGSTATE	0x080	/* Ignore state - */
 					/* combine contig. space */
-#define	XFS_BMAPI_CONTIG	0x400	/* must allocate only one extent */
-/*	XFS_BMAPI_DIRECT_IO	0x800	*/
-#define XFS_BMAPI_CONVERT	0x1000	/* unwritten extent conversion - */
+#define	XFS_BMAPI_CONTIG	0x100	/* must allocate only one extent */
+#define XFS_BMAPI_CONVERT	0x200	/* unwritten extent conversion - */
 					/* need write cache flushing and no */
 					/* additional allocation alignments */
 
@@ -100,9 +83,7 @@ typedef	struct xfs_bmap_free
 	{ XFS_BMAPI_DELAY,	"DELAY" }, \
 	{ XFS_BMAPI_ENTIRE,	"ENTIRE" }, \
 	{ XFS_BMAPI_METADATA,	"METADATA" }, \
-	{ XFS_BMAPI_EXACT,	"EXACT" }, \
 	{ XFS_BMAPI_ATTRFORK,	"ATTRFORK" }, \
-	{ XFS_BMAPI_ASYNC,	"ASYNC" }, \
 	{ XFS_BMAPI_RSVBLOCKS,	"RSVBLOCKS" }, \
 	{ XFS_BMAPI_PREALLOC,	"PREALLOC" }, \
 	{ XFS_BMAPI_IGSTATE,	"IGSTATE" }, \
@@ -310,9 +291,7 @@ xfs_bmapi(
 	xfs_extlen_t		total,		/* total blocks needed */
 	struct xfs_bmbt_irec	*mval,		/* output: map values */
 	int			*nmap,		/* i/o: mval size/count */
-	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta);	/* o: change made to incore
-						   extents */
+	xfs_bmap_free_t		*flist);	/* i/o: list extents to free */
 
 /*
  * Map file blocks to filesystem blocks, simple version.
@@ -346,8 +325,6 @@ xfs_bunmapi(
 	xfs_fsblock_t		*firstblock,	/* first allocated block
 						   controls a.g. for allocs */
 	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta,		/* o: change made to incore
-						   extents */
 	int			*done);		/* set if not done yet */
 
 /*
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 416e47e54b8..87d3c10b695 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -24,21 +24,16 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_alloc.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 96be4b0f249..829af92f0fb 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -24,20 +24,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 02a80984aa0..1b09d7a280d 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -24,7 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -34,6 +33,12 @@
 
 kmem_zone_t	*xfs_buf_item_zone;
 
+static inline struct xfs_buf_log_item *BUF_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_buf_log_item, bli_item);
+}
+
+
 #ifdef XFS_TRANS_DEBUG
 /*
  * This function uses an alternate strategy for tracking the bytes
@@ -151,12 +156,13 @@ STATIC void	xfs_buf_do_callbacks(xfs_buf_t *bp, xfs_log_item_t *lip);
  */
 STATIC uint
 xfs_buf_item_size(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	uint		nvecs;
-	int		next_bit;
-	int		last_bit;
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
+	uint			nvecs;
+	int			next_bit;
+	int			last_bit;
 
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	if (bip->bli_flags & XFS_BLI_STALE) {
@@ -170,7 +176,6 @@ xfs_buf_item_size(
 		return 1;
 	}
 
-	bp = bip->bli_buf;
 	ASSERT(bip->bli_flags & XFS_BLI_LOGGED);
 	nvecs = 1;
 	last_bit = xfs_next_bit(bip->bli_format.blf_data_map,
@@ -219,13 +224,13 @@ xfs_buf_item_size(
  */
 STATIC void
 xfs_buf_item_format(
-	xfs_buf_log_item_t	*bip,
-	xfs_log_iovec_t		*log_vector)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*vecp)
 {
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf	*bp = bip->bli_buf;
 	uint		base_size;
 	uint		nvecs;
-	xfs_log_iovec_t	*vecp;
-	xfs_buf_t	*bp;
 	int		first_bit;
 	int		last_bit;
 	int		next_bit;
@@ -235,8 +240,6 @@ xfs_buf_item_format(
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
 	       (bip->bli_flags & XFS_BLI_STALE));
-	bp = bip->bli_buf;
-	vecp = log_vector;
 
 	/*
 	 * The size of the base structure is the size of the
@@ -248,7 +251,7 @@ xfs_buf_item_format(
 	base_size =
 		(uint)(sizeof(xfs_buf_log_format_t) +
 		       ((bip->bli_format.blf_map_size - 1) * sizeof(uint)));
-	vecp->i_addr = (xfs_caddr_t)&bip->bli_format;
+	vecp->i_addr = &bip->bli_format;
 	vecp->i_len = base_size;
 	vecp->i_type = XLOG_REG_TYPE_BFORMAT;
 	vecp++;
@@ -263,7 +266,7 @@ xfs_buf_item_format(
 	 */
 	if (bip->bli_flags & XFS_BLI_INODE_BUF) {
 		if (!((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) &&
-		      xfs_log_item_in_current_chkpt(&bip->bli_item)))
+		      xfs_log_item_in_current_chkpt(lip)))
 			bip->bli_format.blf_flags |= XFS_BLF_INODE_BUF;
 		bip->bli_flags &= ~XFS_BLI_INODE_BUF;
 	}
@@ -356,66 +359,90 @@ xfs_buf_item_format(
 
 /*
  * This is called to pin the buffer associated with the buf log item in memory
- * so it cannot be written out.  Simply call bpin() on the buffer to do this.
+ * so it cannot be written out.
  *
  * We also always take a reference to the buffer log item here so that the bli
  * is held while the item is pinned in memory. This means that we can
  * unconditionally drop the reference count a transaction holds when the
  * transaction is completed.
  */
-
 STATIC void
 xfs_buf_item_pin(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
 
-	bp = bip->bli_buf;
-	ASSERT(XFS_BUF_ISBUSY(bp));
+	ASSERT(XFS_BUF_ISBUSY(bip->bli_buf));
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
 	       (bip->bli_flags & XFS_BLI_STALE));
-	atomic_inc(&bip->bli_refcount);
+
 	trace_xfs_buf_item_pin(bip);
-	xfs_bpin(bp);
-}
 
+	atomic_inc(&bip->bli_refcount);
+	atomic_inc(&bip->bli_buf->b_pin_count);
+}
 
 /*
  * This is called to unpin the buffer associated with the buf log
  * item which was previously pinned with a call to xfs_buf_item_pin().
- * Just call bunpin() on the buffer to do this.
  *
  * Also drop the reference to the buf item for the current transaction.
  * If the XFS_BLI_STALE flag is set and we are the last reference,
  * then free up the buf log item and unlock the buffer.
+ *
+ * If the remove flag is set we are called from uncommit in the
+ * forced-shutdown path.  If that is true and the reference count on
+ * the log item is going to drop to zero we need to free the item's
+ * descriptor in the transaction.
  */
 STATIC void
 xfs_buf_item_unpin(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_ail	*ailp;
-	xfs_buf_t	*bp;
-	int		freed;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	xfs_buf_t	*bp = bip->bli_buf;
+	struct xfs_ail	*ailp = lip->li_ailp;
 	int		stale = bip->bli_flags & XFS_BLI_STALE;
+	int		freed;
 
-	bp = bip->bli_buf;
-	ASSERT(bp != NULL);
 	ASSERT(XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *) == bip);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
+
 	trace_xfs_buf_item_unpin(bip);
 
 	freed = atomic_dec_and_test(&bip->bli_refcount);
-	ailp = bip->bli_item.li_ailp;
-	xfs_bunpin(bp);
+
+	if (atomic_dec_and_test(&bp->b_pin_count))
+		wake_up_all(&bp->b_waiters);
+
 	if (freed && stale) {
 		ASSERT(bip->bli_flags & XFS_BLI_STALE);
 		ASSERT(XFS_BUF_VALUSEMA(bp) <= 0);
 		ASSERT(!(XFS_BUF_ISDELAYWRITE(bp)));
 		ASSERT(XFS_BUF_ISSTALE(bp));
 		ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+
 		trace_xfs_buf_item_unpin_stale(bip);
 
+		if (remove) {
+			/*
+			 * We have to remove the log item from the transaction
+			 * as we are about to release our reference to the
+			 * buffer.  If we don't, the unlock that occurs later
+			 * in xfs_trans_uncommit() will ry to reference the
+			 * buffer which we no longer have a hold on.
+			 */
+			xfs_trans_del_item(lip);
+
+			/*
+			 * Since the transaction no longer refers to the buffer,
+			 * the buffer should no longer refer to the transaction.
+			 */
+			XFS_BUF_SET_FSPRIVATE2(bp, NULL);
+		}
+
 		/*
 		 * If we get called here because of an IO error, we may
 		 * or may not have the item on the AIL. xfs_trans_ail_delete()
@@ -437,48 +464,6 @@ xfs_buf_item_unpin(
 }
 
 /*
- * this is called from uncommit in the forced-shutdown path.
- * we need to check to see if the reference count on the log item
- * is going to drop to zero.  If so, unpin will free the log item
- * so we need to free the item's descriptor (that points to the item)
- * in the transaction.
- */
-STATIC void
-xfs_buf_item_unpin_remove(
-	xfs_buf_log_item_t	*bip,
-	xfs_trans_t		*tp)
-{
-	/* will xfs_buf_item_unpin() call xfs_buf_item_relse()? */
-	if ((atomic_read(&bip->bli_refcount) == 1) &&
-	    (bip->bli_flags & XFS_BLI_STALE)) {
-		/*
-		 * yes -- We can safely do some work here and then call
-		 * buf_item_unpin to do the rest because we are
-		 * are holding the buffer locked so no one else will be
-		 * able to bump up the refcount. We have to remove the
-		 * log item from the transaction as we are about to release
-		 * our reference to the buffer. If we don't, the unlock that
-		 * occurs later in the xfs_trans_uncommit() will try to
-		 * reference the buffer which we no longer have a hold on.
-		 */
-		struct xfs_log_item_desc *lidp;
-
-		ASSERT(XFS_BUF_VALUSEMA(bip->bli_buf) <= 0);
-		trace_xfs_buf_item_unpin_stale(bip);
-
-		lidp = xfs_trans_find_item(tp, (xfs_log_item_t *)bip);
-		xfs_trans_free_item(tp, lidp);
-
-		/*
-		 * Since the transaction no longer refers to the buffer, the
-		 * buffer should no longer refer to the transaction.
-		 */
-		XFS_BUF_SET_FSPRIVATE2(bip->bli_buf, NULL);
-	}
-	xfs_buf_item_unpin(bip);
-}
-
-/*
  * This is called to attempt to lock the buffer associated with this
  * buf log item.  Don't sleep on the buffer lock.  If we can't get
  * the lock right away, return 0.  If we can get the lock, take a
@@ -488,11 +473,11 @@ xfs_buf_item_unpin_remove(
  */
 STATIC uint
 xfs_buf_item_trylock(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
-	bp = bip->bli_buf;
 	if (XFS_BUF_ISPINNED(bp))
 		return XFS_ITEM_PINNED;
 	if (!XFS_BUF_CPSEMA(bp))
@@ -529,13 +514,12 @@ xfs_buf_item_trylock(
  */
 STATIC void
 xfs_buf_item_unlock(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	int		aborted;
-	xfs_buf_t	*bp;
-	uint		hold;
-
-	bp = bip->bli_buf;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
+	int			aborted;
+	uint			hold;
 
 	/* Clear the buffer's association with this transaction. */
 	XFS_BUF_SET_FSPRIVATE2(bp, NULL);
@@ -546,7 +530,7 @@ xfs_buf_item_unlock(
 	 * (cancelled) buffers at unpin time, but we'll never go through the
 	 * pin/unpin cycle if we abort inside commit.
 	 */
-	aborted = (bip->bli_item.li_flags & XFS_LI_ABORTED) != 0;
+	aborted = (lip->li_flags & XFS_LI_ABORTED) != 0;
 
 	/*
 	 * Before possibly freeing the buf item, determine if we should
@@ -607,16 +591,16 @@ xfs_buf_item_unlock(
  */
 STATIC xfs_lsn_t
 xfs_buf_item_committed(
-	xfs_buf_log_item_t	*bip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+
 	trace_xfs_buf_item_committed(bip);
 
-	if ((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) &&
-	    (bip->bli_item.li_lsn != 0)) {
-		return bip->bli_item.li_lsn;
-	}
-	return (lsn);
+	if ((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) && lip->li_lsn != 0)
+		return lip->li_lsn;
+	return lsn;
 }
 
 /*
@@ -626,15 +610,16 @@ xfs_buf_item_committed(
  */
 STATIC void
 xfs_buf_item_push(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
 	ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
+	ASSERT(!XFS_BUF_ISDELAYWRITE(bp));
+
 	trace_xfs_buf_item_push(bip);
 
-	bp = bip->bli_buf;
-	ASSERT(!XFS_BUF_ISDELAYWRITE(bp));
 	xfs_buf_relse(bp);
 }
 
@@ -646,22 +631,24 @@ xfs_buf_item_push(
  */
 STATIC void
 xfs_buf_item_pushbuf(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
 	ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
+	ASSERT(XFS_BUF_ISDELAYWRITE(bp));
+
 	trace_xfs_buf_item_pushbuf(bip);
 
-	bp = bip->bli_buf;
-	ASSERT(XFS_BUF_ISDELAYWRITE(bp));
 	xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
 }
 
-/* ARGSUSED */
 STATIC void
-xfs_buf_item_committing(xfs_buf_log_item_t *bip, xfs_lsn_t commit_lsn)
+xfs_buf_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		commit_lsn)
 {
 }
 
@@ -669,21 +656,16 @@ xfs_buf_item_committing(xfs_buf_log_item_t *bip, xfs_lsn_t commit_lsn)
  * This is the ops vector shared by all buf log items.
  */
 static struct xfs_item_ops xfs_buf_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_buf_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_buf_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_buf_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_buf_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t *))
-					xfs_buf_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_buf_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_buf_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_buf_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_buf_item_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))xfs_buf_item_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_buf_item_committing
+	.iop_size	= xfs_buf_item_size,
+	.iop_format	= xfs_buf_item_format,
+	.iop_pin	= xfs_buf_item_pin,
+	.iop_unpin	= xfs_buf_item_unpin,
+	.iop_trylock	= xfs_buf_item_trylock,
+	.iop_unlock	= xfs_buf_item_unlock,
+	.iop_committed	= xfs_buf_item_committed,
+	.iop_push	= xfs_buf_item_push,
+	.iop_pushbuf	= xfs_buf_item_pushbuf,
+	.iop_committing = xfs_buf_item_committing
 };
 
 
@@ -712,7 +694,6 @@ xfs_buf_item_init(
 	 */
 	if (bp->b_mount != mp)
 		bp->b_mount = mp;
-	XFS_BUF_SET_BDSTRAT_FUNC(bp, xfs_bdstrat_cb);
 	if (XFS_BUF_FSPRIVATE(bp, void *) != NULL) {
 		lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
 		if (lip->li_type == XFS_LI_BUF) {
@@ -1098,15 +1079,14 @@ xfs_buf_error_relse(
  * It is called by xfs_buf_iodone_callbacks() above which will take
  * care of cleaning up the buffer itself.
  */
-/* ARGSUSED */
 void
 xfs_buf_iodone(
-	xfs_buf_t		*bp,
-	xfs_buf_log_item_t	*bip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
-	struct xfs_ail		*ailp = bip->bli_item.li_ailp;
+	struct xfs_ail		*ailp = lip->li_ailp;
 
-	ASSERT(bip->bli_buf == bp);
+	ASSERT(BUF_ITEM(lip)->bli_buf == bp);
 
 	xfs_buf_rele(bp);
 
@@ -1120,6 +1100,6 @@ xfs_buf_iodone(
 	 * Either way, AIL is useless if we're forcing a shutdown.
 	 */
 	spin_lock(&ailp->xa_lock);
-	xfs_trans_ail_delete(ailp, (xfs_log_item_t *)bip);
-	xfs_buf_item_free(bip);
+	xfs_trans_ail_delete(ailp, lip);
+	xfs_buf_item_free(BUF_ITEM(lip));
 }
diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h
index f20bb472d58..0e2ed43f16c 100644
--- a/fs/xfs/xfs_buf_item.h
+++ b/fs/xfs/xfs_buf_item.h
@@ -124,7 +124,7 @@ void	xfs_buf_attach_iodone(struct xfs_buf *,
 			      void(*)(struct xfs_buf *, xfs_log_item_t *),
 			      xfs_log_item_t *);
 void	xfs_buf_iodone_callbacks(struct xfs_buf *);
-void	xfs_buf_iodone(struct xfs_buf *, xfs_buf_log_item_t *);
+void	xfs_buf_iodone(struct xfs_buf *, struct xfs_log_item *);
 
 #ifdef XFS_TRANS_DEBUG
 void
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 0ca556b4bf3..30fa0e206fb 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -25,19 +25,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_attr.h"
 #include "xfs_attr_leaf.h"
@@ -581,16 +576,14 @@ xfs_da_node_add(xfs_da_state_t *state, xfs_da_state_blk_t *oldblk,
 	xfs_da_intnode_t *node;
 	xfs_da_node_entry_t *btree;
 	int tmp;
-	xfs_mount_t *mp;
 
 	node = oldblk->bp->data;
-	mp = state->mp;
 	ASSERT(be16_to_cpu(node->hdr.info.magic) == XFS_DA_NODE_MAGIC);
 	ASSERT((oldblk->index >= 0) && (oldblk->index <= be16_to_cpu(node->hdr.count)));
 	ASSERT(newblk->blkno != 0);
 	if (state->args->whichfork == XFS_DATA_FORK)
-		ASSERT(newblk->blkno >= mp->m_dirleafblk &&
-		       newblk->blkno < mp->m_dirfreeblk);
+		ASSERT(newblk->blkno >= state->mp->m_dirleafblk &&
+		       newblk->blkno < state->mp->m_dirfreeblk);
 
 	/*
 	 * We may need to make some room before we insert the new node.
@@ -1601,7 +1594,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 			xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
 			XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
-			args->flist, NULL))) {
+			args->flist))) {
 		return error;
 	}
 	ASSERT(nmap <= 1);
@@ -1622,8 +1615,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 					xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
 					XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
-					&mapp[mapi], &nmap, args->flist,
-					NULL))) {
+					&mapp[mapi], &nmap, args->flist))) {
 				kmem_free(mapp);
 				return error;
 			}
@@ -1884,7 +1876,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno,
 		 */
 		if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
 				xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
-				0, args->firstblock, args->flist, NULL,
+				0, args->firstblock, args->flist,
 				&done)) == ENOSPC) {
 			if (w != XFS_DATA_FORK)
 				break;
@@ -1989,7 +1981,7 @@ xfs_da_do_buf(
 					nfsb,
 					XFS_BMAPI_METADATA |
 						xfs_bmapi_aflag(whichfork),
-					NULL, 0, mapp, &nmap, NULL, NULL)))
+					NULL, 0, mapp, &nmap, NULL)))
 				goto exit0;
 		}
 	} else {
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 5bba29a0781..3b9582c60a2 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -24,24 +24,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_dfrag.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 #include "xfs_trace.h"
 
@@ -69,7 +60,9 @@ xfs_swapext(
 		goto out;
 	}
 
-	if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND)) {
+	if (!(file->f_mode & FMODE_WRITE) ||
+	    !(file->f_mode & FMODE_READ) ||
+	    (file->f_flags & O_APPEND)) {
 		error = XFS_ERROR(EBADF);
 		goto out_put_file;
 	}
@@ -81,6 +74,7 @@ xfs_swapext(
 	}
 
 	if (!(tmp_file->f_mode & FMODE_WRITE) ||
+	    !(tmp_file->f_mode & FMODE_READ) ||
 	    (tmp_file->f_flags & O_APPEND)) {
 		error = XFS_ERROR(EBADF);
 		goto out_put_tmp_file;
@@ -422,11 +416,8 @@ xfs_swap_extents(
 	}
 
 
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	IHOLD(tip);
-	xfs_trans_ijoin(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 
 	xfs_trans_log_inode(tp, ip,  ilf_fields);
 	xfs_trans_log_inode(tp, tip, tilf_fields);
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index 42520f04126..a1321bc7f19 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -25,13 +25,11 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -382,7 +380,7 @@ xfs_readdir(
 	int		rval;		/* return value */
 	int		v;		/* type-checking value */
 
-	xfs_itrace_entry(dp);
+	trace_xfs_readdir(dp);
 
 	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
 		return XFS_ERROR(EIO);
@@ -549,7 +547,7 @@ xfs_dir2_grow_inode(
 	if ((error = xfs_bmapi(tp, dp, bno, count,
 			XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
-			args->flist, NULL)))
+			args->flist)))
 		return error;
 	ASSERT(nmap <= 1);
 	if (nmap == 1) {
@@ -581,8 +579,7 @@ xfs_dir2_grow_inode(
 			if ((error = xfs_bmapi(tp, dp, b, c,
 					XFS_BMAPI_WRITE|XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
-					&mapp[mapi], &nmap, args->flist,
-					NULL))) {
+					&mapp[mapi], &nmap, args->flist))) {
 				kmem_free(mapp);
 				return error;
 			}
@@ -715,7 +712,7 @@ xfs_dir2_shrink_inode(
 	 */
 	if ((error = xfs_bunmapi(tp, dp, da, mp->m_dirblkfsbs,
 			XFS_BMAPI_METADATA, 0, args->firstblock, args->flist,
-			NULL, &done))) {
+			&done))) {
 		/*
 		 * ENOSPC actually can happen if we're in a removename with
 		 * no space reservation, and the resulting block removal
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index 779a267b0a8..580d99cef9e 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -1073,10 +1071,10 @@ xfs_dir2_sf_to_block(
 	 */
 
 	buf_len = dp->i_df.if_bytes;
-	buf = kmem_alloc(dp->i_df.if_bytes, KM_SLEEP);
+	buf = kmem_alloc(buf_len, KM_SLEEP);
 
-	memcpy(buf, sfp, dp->i_df.if_bytes);
-	xfs_idata_realloc(dp, -dp->i_df.if_bytes, XFS_DATA_FORK);
+	memcpy(buf, sfp, buf_len);
+	xfs_idata_realloc(dp, -buf_len, XFS_DATA_FORK);
 	dp->i_d.di_size = 0;
 	xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 	/*
diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c
index 498f8d69433..921595b84f5 100644
--- a/fs/xfs/xfs_dir2_data.c
+++ b/fs/xfs/xfs_dir2_data.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_dir2_data.h"
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index e2d89854ec9..504be8640e9 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -25,11 +25,9 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -875,7 +873,7 @@ xfs_dir2_leaf_getdents(
 					xfs_dir2_byte_to_da(mp,
 						XFS_DIR2_LEAF_OFFSET) - map_off,
 					XFS_BMAPI_METADATA, NULL, 0,
-					&map[map_valid], &nmap, NULL, NULL);
+					&map[map_valid], &nmap, NULL);
 				/*
 				 * Don't know if we should ignore this or
 				 * try to return an error.
diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c
index 78fc4d9ae75..f9a0864b696 100644
--- a/fs/xfs/xfs_dir2_node.c
+++ b/fs/xfs/xfs_dir2_node.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index c1a5945d463..b1bae6b1eed 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
deleted file mode 100644
index 2813cdd7237..00000000000
--- a/fs/xfs/xfs_dmapi.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_DMAPI_H__
-#define __XFS_DMAPI_H__
-
-/*	Values used to define the on-disk version of dm_attrname_t. All
- *	on-disk attribute names start with the 8-byte string "SGI_DMI_".
- *
- *      In the on-disk inode, DMAPI attribute names consist of the user-provided
- *      name with the DMATTR_PREFIXSTRING pre-pended.  This string must NEVER be
- *      changed.
- */
-
-#define DMATTR_PREFIXLEN	8
-#define DMATTR_PREFIXSTRING	"SGI_DMI_"
-
-typedef enum {
-	DM_EVENT_INVALID	= -1,
-	DM_EVENT_CANCEL		= 0,		/* not supported */
-	DM_EVENT_MOUNT		= 1,
-	DM_EVENT_PREUNMOUNT	= 2,
-	DM_EVENT_UNMOUNT	= 3,
-	DM_EVENT_DEBUT		= 4,		/* not supported */
-	DM_EVENT_CREATE		= 5,
-	DM_EVENT_CLOSE		= 6,		/* not supported */
-	DM_EVENT_POSTCREATE	= 7,
-	DM_EVENT_REMOVE		= 8,
-	DM_EVENT_POSTREMOVE	= 9,
-	DM_EVENT_RENAME		= 10,
-	DM_EVENT_POSTRENAME	= 11,
-	DM_EVENT_LINK		= 12,
-	DM_EVENT_POSTLINK	= 13,
-	DM_EVENT_SYMLINK	= 14,
-	DM_EVENT_POSTSYMLINK	= 15,
-	DM_EVENT_READ		= 16,
-	DM_EVENT_WRITE		= 17,
-	DM_EVENT_TRUNCATE	= 18,
-	DM_EVENT_ATTRIBUTE	= 19,
-	DM_EVENT_DESTROY	= 20,
-	DM_EVENT_NOSPACE	= 21,
-	DM_EVENT_USER		= 22,
-	DM_EVENT_MAX		= 23
-} dm_eventtype_t;
-#define HAVE_DM_EVENTTYPE_T
-
-typedef enum {
-	DM_RIGHT_NULL,
-	DM_RIGHT_SHARED,
-	DM_RIGHT_EXCL
-} dm_right_t;
-#define HAVE_DM_RIGHT_T
-
-/* Defines for determining if an event message should be sent. */
-#ifdef HAVE_DMAPI
-#define	DM_EVENT_ENABLED(ip, event) ( \
-	unlikely ((ip)->i_mount->m_flags & XFS_MOUNT_DMAPI) && \
-		( ((ip)->i_d.di_dmevmask & (1 << event)) || \
-		  ((ip)->i_mount->m_dmevmask & (1 << event)) ) \
-	)
-#else
-#define DM_EVENT_ENABLED(ip, event)	(0)
-#endif
-
-#define DM_XFS_VALID_FS_EVENTS		( \
-	(1 << DM_EVENT_PREUNMOUNT)	| \
-	(1 << DM_EVENT_UNMOUNT)		| \
-	(1 << DM_EVENT_NOSPACE)		| \
-	(1 << DM_EVENT_DEBUT)		| \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events valid in dm_set_eventlist() when called with a file handle for
-   a regular file or a symlink.  These events are persistent.
-*/
-
-#define	DM_XFS_VALID_FILE_EVENTS	( \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events valid in dm_set_eventlist() when called with a file handle for
-   a directory.  These events are persistent.
-*/
-
-#define	DM_XFS_VALID_DIRECTORY_EVENTS	( \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events supported by the XFS filesystem. */
-#define	DM_XFS_SUPPORTED_EVENTS		( \
-	(1 << DM_EVENT_MOUNT)		| \
-	(1 << DM_EVENT_PREUNMOUNT)	| \
-	(1 << DM_EVENT_UNMOUNT)		| \
-	(1 << DM_EVENT_NOSPACE)		| \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_READ)		| \
-	(1 << DM_EVENT_WRITE)		| \
-	(1 << DM_EVENT_TRUNCATE)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-
-/*
- *	Definitions used for the flags field on dm_send_*_event().
- */
-
-#define DM_FLAGS_NDELAY		0x001	/* return EAGAIN after dm_pending() */
-#define DM_FLAGS_UNWANTED	0x002	/* event not in fsys dm_eventset_t */
-#define DM_FLAGS_IMUX		0x004	/* thread holds i_mutex */
-#define DM_FLAGS_IALLOCSEM_RD	0x010	/* thread holds i_alloc_sem rd */
-#define DM_FLAGS_IALLOCSEM_WR	0x020	/* thread holds i_alloc_sem wr */
-
-/*
- *	Pull in platform specific event flags defines
- */
-#include "xfs_dmapi_priv.h"
-
-/*
- *	Macros to turn caller specified delay/block flags into
- *	dm_send_xxxx_event flag DM_FLAGS_NDELAY.
- */
-
-#define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \
-			DM_FLAGS_NDELAY : 0)
-#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
-
-#endif  /* __XFS_DMAPI_H__ */
diff --git a/fs/xfs/xfs_dmops.c b/fs/xfs/xfs_dmops.c
deleted file mode 100644
index e71e2581c0c..00000000000
--- a/fs/xfs/xfs_dmops.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_trans.h"
-#include "xfs_sb.h"
-#include "xfs_dmapi.h"
-#include "xfs_inum.h"
-#include "xfs_ag.h"
-#include "xfs_mount.h"
-
-
-static struct xfs_dmops xfs_dmcore_stub = {
-	.xfs_send_data		= (xfs_send_data_t)fs_nosys,
-	.xfs_send_mmap		= (xfs_send_mmap_t)fs_noerr,
-	.xfs_send_destroy	= (xfs_send_destroy_t)fs_nosys,
-	.xfs_send_namesp	= (xfs_send_namesp_t)fs_nosys,
-	.xfs_send_mount		= (xfs_send_mount_t)fs_nosys,
-	.xfs_send_unmount	= (xfs_send_unmount_t)fs_noerr,
-};
-
-int
-xfs_dmops_get(struct xfs_mount *mp)
-{
-	if (mp->m_flags & XFS_MOUNT_DMAPI) {
-		cmn_err(CE_WARN,
-			"XFS: dmapi support not available in this kernel.");
-		return EINVAL;
-	}
-
-	mp->m_dm_ops = &xfs_dmcore_stub;
-	return 0;
-}
-
-void
-xfs_dmops_put(struct xfs_mount *mp)
-{
-}
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 047b8a8e5c2..ed999026766 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -23,12 +23,8 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_utils.h"
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index 409fe81585f..a55e687bf56 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -24,7 +24,6 @@
 #include "xfs_buf_item.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_extfree_item.h"
@@ -33,18 +32,19 @@
 kmem_zone_t	*xfs_efi_zone;
 kmem_zone_t	*xfs_efd_zone;
 
-STATIC void	xfs_efi_item_unlock(xfs_efi_log_item_t *);
+static inline struct xfs_efi_log_item *EFI_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_efi_log_item, efi_item);
+}
 
 void
-xfs_efi_item_free(xfs_efi_log_item_t *efip)
+xfs_efi_item_free(
+	struct xfs_efi_log_item	*efip)
 {
-	int nexts = efip->efi_format.efi_nextents;
-
-	if (nexts > XFS_EFI_MAX_FAST_EXTENTS) {
+	if (efip->efi_format.efi_nextents > XFS_EFI_MAX_FAST_EXTENTS)
 		kmem_free(efip);
-	} else {
+	else
 		kmem_zone_free(xfs_efi_zone, efip);
-	}
 }
 
 /*
@@ -52,9 +52,9 @@ xfs_efi_item_free(xfs_efi_log_item_t *efip)
  * We only need 1 iovec for an efi item.  It just logs the efi_log_format
  * structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efi_item_size(xfs_efi_log_item_t *efip)
+xfs_efi_item_size(
+	struct xfs_log_item	*lip)
 {
 	return 1;
 }
@@ -67,10 +67,12 @@ xfs_efi_item_size(xfs_efi_log_item_t *efip)
  * slots in the efi item have been filled.
  */
 STATIC void
-xfs_efi_item_format(xfs_efi_log_item_t	*efip,
-		    xfs_log_iovec_t	*log_vector)
+xfs_efi_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	uint	size;
+	struct xfs_efi_log_item	*efip = EFI_ITEM(lip);
+	uint			size;
 
 	ASSERT(efip->efi_next_extent == efip->efi_format.efi_nextents);
 
@@ -80,7 +82,7 @@ xfs_efi_item_format(xfs_efi_log_item_t	*efip,
 	size += (efip->efi_format.efi_nextents - 1) * sizeof(xfs_extent_t);
 	efip->efi_format.efi_size = 1;
 
-	log_vector->i_addr = (xfs_caddr_t)&(efip->efi_format);
+	log_vector->i_addr = &efip->efi_format;
 	log_vector->i_len = size;
 	log_vector->i_type = XLOG_REG_TYPE_EFI_FORMAT;
 	ASSERT(size >= sizeof(xfs_efi_log_format_t));
@@ -90,60 +92,33 @@ xfs_efi_item_format(xfs_efi_log_item_t	*efip,
 /*
  * Pinning has no meaning for an efi item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_pin(xfs_efi_log_item_t *efip)
+xfs_efi_item_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * While EFIs cannot really be pinned, the unpin operation is the
  * last place at which the EFI is manipulated during a transaction.
  * Here we coordinate with xfs_efi_cancel() to determine who gets to
  * free the EFI.
  */
-/*ARGSUSED*/
-STATIC void
-xfs_efi_item_unpin(xfs_efi_log_item_t *efip)
-{
-	struct xfs_ail		*ailp = efip->efi_item.li_ailp;
-
-	spin_lock(&ailp->xa_lock);
-	if (efip->efi_flags & XFS_EFI_CANCELED) {
-		/* xfs_trans_ail_delete() drops the AIL lock. */
-		xfs_trans_ail_delete(ailp, (xfs_log_item_t *)efip);
-		xfs_efi_item_free(efip);
-	} else {
-		efip->efi_flags |= XFS_EFI_COMMITTED;
-		spin_unlock(&ailp->xa_lock);
-	}
-}
-
-/*
- * like unpin only we have to also clear the xaction descriptor
- * pointing the log item if we free the item.  This routine duplicates
- * unpin because efi_flags is protected by the AIL lock.  Freeing
- * the descriptor and then calling unpin would force us to drop the AIL
- * lock which would open up a race condition.
- */
 STATIC void
-xfs_efi_item_unpin_remove(xfs_efi_log_item_t *efip, xfs_trans_t *tp)
+xfs_efi_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_ail		*ailp = efip->efi_item.li_ailp;
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_efi_log_item	*efip = EFI_ITEM(lip);
+	struct xfs_ail		*ailp = lip->li_ailp;
 
 	spin_lock(&ailp->xa_lock);
 	if (efip->efi_flags & XFS_EFI_CANCELED) {
-		/*
-		 * free the xaction descriptor pointing to this item
-		 */
-		lidp = xfs_trans_find_item(tp, (xfs_log_item_t *) efip);
-		xfs_trans_free_item(tp, lidp);
+		if (remove)
+			xfs_trans_del_item(lip);
 
 		/* xfs_trans_ail_delete() drops the AIL lock. */
-		xfs_trans_ail_delete(ailp, (xfs_log_item_t *)efip);
+		xfs_trans_ail_delete(ailp, lip);
 		xfs_efi_item_free(efip);
 	} else {
 		efip->efi_flags |= XFS_EFI_COMMITTED;
@@ -158,9 +133,9 @@ xfs_efi_item_unpin_remove(xfs_efi_log_item_t *efip, xfs_trans_t *tp)
  * XFS_ITEM_PINNED so that the caller will eventually flush the log.
  * This should help in getting the EFI out of the AIL.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efi_item_trylock(xfs_efi_log_item_t *efip)
+xfs_efi_item_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_PINNED;
 }
@@ -168,13 +143,12 @@ xfs_efi_item_trylock(xfs_efi_log_item_t *efip)
 /*
  * Efi items have no locking, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_unlock(xfs_efi_log_item_t *efip)
+xfs_efi_item_unlock(
+	struct xfs_log_item	*lip)
 {
-	if (efip->efi_item.li_flags & XFS_LI_ABORTED)
-		xfs_efi_item_free(efip);
-	return;
+	if (lip->li_flags & XFS_LI_ABORTED)
+		xfs_efi_item_free(EFI_ITEM(lip));
 }
 
 /*
@@ -183,9 +157,10 @@ xfs_efi_item_unlock(xfs_efi_log_item_t *efip)
  * flag is not paid any attention here.  Checking for that is delayed
  * until the EFI is unpinned.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_efi_item_committed(xfs_efi_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efi_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
 	return lsn;
 }
@@ -195,11 +170,10 @@ xfs_efi_item_committed(xfs_efi_log_item_t *efip, xfs_lsn_t lsn)
  * stuck waiting for all of its corresponding efd items to be
  * committed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_push(xfs_efi_log_item_t *efip)
+xfs_efi_item_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
@@ -209,61 +183,55 @@ xfs_efi_item_push(xfs_efi_log_item_t *efip)
  * example, for inodes, the inode is locked throughout the extent freeing
  * so the dependency should be recorded there.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_committing(xfs_efi_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efi_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return;
 }
 
 /*
  * This is the ops vector shared by all efi log items.
  */
 static struct xfs_item_ops xfs_efi_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_efi_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_efi_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_efi_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_efi_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t *))
-					xfs_efi_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_efi_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_efi_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efi_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_efi_item_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efi_item_committing
+	.iop_size	= xfs_efi_item_size,
+	.iop_format	= xfs_efi_item_format,
+	.iop_pin	= xfs_efi_item_pin,
+	.iop_unpin	= xfs_efi_item_unpin,
+	.iop_trylock	= xfs_efi_item_trylock,
+	.iop_unlock	= xfs_efi_item_unlock,
+	.iop_committed	= xfs_efi_item_committed,
+	.iop_push	= xfs_efi_item_push,
+	.iop_committing = xfs_efi_item_committing
 };
 
 
 /*
  * Allocate and initialize an efi item with the given number of extents.
  */
-xfs_efi_log_item_t *
-xfs_efi_init(xfs_mount_t	*mp,
-	     uint		nextents)
+struct xfs_efi_log_item *
+xfs_efi_init(
+	struct xfs_mount	*mp,
+	uint			nextents)
 
 {
-	xfs_efi_log_item_t	*efip;
+	struct xfs_efi_log_item	*efip;
 	uint			size;
 
 	ASSERT(nextents > 0);
 	if (nextents > XFS_EFI_MAX_FAST_EXTENTS) {
 		size = (uint)(sizeof(xfs_efi_log_item_t) +
 			((nextents - 1) * sizeof(xfs_extent_t)));
-		efip = (xfs_efi_log_item_t*)kmem_zalloc(size, KM_SLEEP);
+		efip = kmem_zalloc(size, KM_SLEEP);
 	} else {
-		efip = (xfs_efi_log_item_t*)kmem_zone_zalloc(xfs_efi_zone,
-							     KM_SLEEP);
+		efip = kmem_zone_zalloc(xfs_efi_zone, KM_SLEEP);
 	}
 
 	xfs_log_item_init(mp, &efip->efi_item, XFS_LI_EFI, &xfs_efi_item_ops);
 	efip->efi_format.efi_nextents = nextents;
 	efip->efi_format.efi_id = (__psint_t)(void*)efip;
 
-	return (efip);
+	return efip;
 }
 
 /*
@@ -276,7 +244,7 @@ xfs_efi_init(xfs_mount_t	*mp,
 int
 xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt)
 {
-	xfs_efi_log_format_t *src_efi_fmt = (xfs_efi_log_format_t *)buf->i_addr;
+	xfs_efi_log_format_t *src_efi_fmt = buf->i_addr;
 	uint i;
 	uint len = sizeof(xfs_efi_log_format_t) + 
 		(src_efi_fmt->efi_nextents - 1) * sizeof(xfs_extent_t);  
@@ -289,8 +257,7 @@ xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt)
 		memcpy((char *)dst_efi_fmt, (char*)src_efi_fmt, len);
 		return 0;
 	} else if (buf->i_len == len32) {
-		xfs_efi_log_format_32_t *src_efi_fmt_32 =
-			(xfs_efi_log_format_32_t *)buf->i_addr;
+		xfs_efi_log_format_32_t *src_efi_fmt_32 = buf->i_addr;
 
 		dst_efi_fmt->efi_type     = src_efi_fmt_32->efi_type;
 		dst_efi_fmt->efi_size     = src_efi_fmt_32->efi_size;
@@ -304,8 +271,7 @@ xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt)
 		}
 		return 0;
 	} else if (buf->i_len == len64) {
-		xfs_efi_log_format_64_t *src_efi_fmt_64 =
-			(xfs_efi_log_format_64_t *)buf->i_addr;
+		xfs_efi_log_format_64_t *src_efi_fmt_64 = buf->i_addr;
 
 		dst_efi_fmt->efi_type     = src_efi_fmt_64->efi_type;
 		dst_efi_fmt->efi_size     = src_efi_fmt_64->efi_size;
@@ -356,16 +322,18 @@ xfs_efi_release(xfs_efi_log_item_t	*efip,
 	}
 }
 
-STATIC void
-xfs_efd_item_free(xfs_efd_log_item_t *efdp)
+static inline struct xfs_efd_log_item *EFD_ITEM(struct xfs_log_item *lip)
 {
-	int nexts = efdp->efd_format.efd_nextents;
+	return container_of(lip, struct xfs_efd_log_item, efd_item);
+}
 
-	if (nexts > XFS_EFD_MAX_FAST_EXTENTS) {
+STATIC void
+xfs_efd_item_free(struct xfs_efd_log_item *efdp)
+{
+	if (efdp->efd_format.efd_nextents > XFS_EFD_MAX_FAST_EXTENTS)
 		kmem_free(efdp);
-	} else {
+	else
 		kmem_zone_free(xfs_efd_zone, efdp);
-	}
 }
 
 /*
@@ -373,9 +341,9 @@ xfs_efd_item_free(xfs_efd_log_item_t *efdp)
  * We only need 1 iovec for an efd item.  It just logs the efd_log_format
  * structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efd_item_size(xfs_efd_log_item_t *efdp)
+xfs_efd_item_size(
+	struct xfs_log_item	*lip)
 {
 	return 1;
 }
@@ -388,10 +356,12 @@ xfs_efd_item_size(xfs_efd_log_item_t *efdp)
  * slots in the efd item have been filled.
  */
 STATIC void
-xfs_efd_item_format(xfs_efd_log_item_t	*efdp,
-		    xfs_log_iovec_t	*log_vector)
+xfs_efd_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	uint	size;
+	struct xfs_efd_log_item	*efdp = EFD_ITEM(lip);
+	uint			size;
 
 	ASSERT(efdp->efd_next_extent == efdp->efd_format.efd_nextents);
 
@@ -401,48 +371,38 @@ xfs_efd_item_format(xfs_efd_log_item_t	*efdp,
 	size += (efdp->efd_format.efd_nextents - 1) * sizeof(xfs_extent_t);
 	efdp->efd_format.efd_size = 1;
 
-	log_vector->i_addr = (xfs_caddr_t)&(efdp->efd_format);
+	log_vector->i_addr = &efdp->efd_format;
 	log_vector->i_len = size;
 	log_vector->i_type = XLOG_REG_TYPE_EFD_FORMAT;
 	ASSERT(size >= sizeof(xfs_efd_log_format_t));
 }
 
-
 /*
  * Pinning has no meaning for an efd item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_pin(xfs_efd_log_item_t *efdp)
+xfs_efd_item_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * Since pinning has no meaning for an efd item, unpinning does
  * not either.
  */
-/*ARGSUSED*/
-STATIC void
-xfs_efd_item_unpin(xfs_efd_log_item_t *efdp)
-{
-	return;
-}
-
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_unpin_remove(xfs_efd_log_item_t *efdp, xfs_trans_t *tp)
+xfs_efd_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	return;
 }
 
 /*
  * Efd items have no locking, so just return success.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efd_item_trylock(xfs_efd_log_item_t *efdp)
+xfs_efd_item_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_LOCKED;
 }
@@ -451,13 +411,12 @@ xfs_efd_item_trylock(xfs_efd_log_item_t *efdp)
  * Efd items have no locking or pushing, so return failure
  * so that the caller doesn't bother with us.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_unlock(xfs_efd_log_item_t *efdp)
+xfs_efd_item_unlock(
+	struct xfs_log_item	*lip)
 {
-	if (efdp->efd_item.li_flags & XFS_LI_ABORTED)
-		xfs_efd_item_free(efdp);
-	return;
+	if (lip->li_flags & XFS_LI_ABORTED)
+		xfs_efd_item_free(EFD_ITEM(lip));
 }
 
 /*
@@ -467,15 +426,18 @@ xfs_efd_item_unlock(xfs_efd_log_item_t *efdp)
  * return -1 to keep the transaction code from further referencing
  * this item.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_efd_item_committed(xfs_efd_log_item_t *efdp, xfs_lsn_t lsn)
+xfs_efd_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
+	struct xfs_efd_log_item	*efdp = EFD_ITEM(lip);
+
 	/*
 	 * If we got a log I/O error, it's always the case that the LR with the
 	 * EFI got unpinned and freed before the EFD got aborted.
 	 */
-	if ((efdp->efd_item.li_flags & XFS_LI_ABORTED) == 0)
+	if (!(lip->li_flags & XFS_LI_ABORTED))
 		xfs_efi_release(efdp->efd_efip, efdp->efd_format.efd_nextents);
 
 	xfs_efd_item_free(efdp);
@@ -486,11 +448,10 @@ xfs_efd_item_committed(xfs_efd_log_item_t *efdp, xfs_lsn_t lsn)
  * There isn't much you can do to push on an efd item.  It is simply
  * stuck waiting for the log to be flushed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_push(xfs_efd_log_item_t *efdp)
+xfs_efd_item_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
@@ -500,55 +461,48 @@ xfs_efd_item_push(xfs_efd_log_item_t *efdp)
  * example, for inodes, the inode is locked throughout the extent freeing
  * so the dependency should be recorded there.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_committing(xfs_efd_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efd_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return;
 }
 
 /*
  * This is the ops vector shared by all efd log items.
  */
 static struct xfs_item_ops xfs_efd_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_efd_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_efd_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_efd_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_efd_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_efd_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_efd_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_efd_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efd_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_efd_item_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efd_item_committing
+	.iop_size	= xfs_efd_item_size,
+	.iop_format	= xfs_efd_item_format,
+	.iop_pin	= xfs_efd_item_pin,
+	.iop_unpin	= xfs_efd_item_unpin,
+	.iop_trylock	= xfs_efd_item_trylock,
+	.iop_unlock	= xfs_efd_item_unlock,
+	.iop_committed	= xfs_efd_item_committed,
+	.iop_push	= xfs_efd_item_push,
+	.iop_committing = xfs_efd_item_committing
 };
 
-
 /*
  * Allocate and initialize an efd item with the given number of extents.
  */
-xfs_efd_log_item_t *
-xfs_efd_init(xfs_mount_t	*mp,
-	     xfs_efi_log_item_t	*efip,
-	     uint		nextents)
+struct xfs_efd_log_item *
+xfs_efd_init(
+	struct xfs_mount	*mp,
+	struct xfs_efi_log_item	*efip,
+	uint			nextents)
 
 {
-	xfs_efd_log_item_t	*efdp;
+	struct xfs_efd_log_item	*efdp;
 	uint			size;
 
 	ASSERT(nextents > 0);
 	if (nextents > XFS_EFD_MAX_FAST_EXTENTS) {
 		size = (uint)(sizeof(xfs_efd_log_item_t) +
 			((nextents - 1) * sizeof(xfs_extent_t)));
-		efdp = (xfs_efd_log_item_t*)kmem_zalloc(size, KM_SLEEP);
+		efdp = kmem_zalloc(size, KM_SLEEP);
 	} else {
-		efdp = (xfs_efd_log_item_t*)kmem_zone_zalloc(xfs_efd_zone,
-							     KM_SLEEP);
+		efdp = kmem_zone_zalloc(xfs_efd_zone, KM_SLEEP);
 	}
 
 	xfs_log_item_init(mp, &efdp->efd_item, XFS_LI_EFD, &xfs_efd_item_ops);
@@ -556,5 +510,5 @@ xfs_efd_init(xfs_mount_t	*mp,
 	efdp->efd_format.efd_nextents = nextents;
 	efdp->efd_format.efd_efi_id = efip->efi_format.efi_id;
 
-	return (efdp);
+	return efdp;
 }
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 390850ee660..9b715dce569 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -18,13 +18,9 @@
 #include "xfs.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inum.h"
-#include "xfs_dir2.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_log.h"
 #include "xfs_trans.h"
 #include "xfs_sb.h"
@@ -127,6 +123,82 @@ typedef struct fstrm_item
 	xfs_inode_t	*pip;	/* Parent directory inode pointer. */
 } fstrm_item_t;
 
+/*
+ * Allocation group filestream associations are tracked with per-ag atomic
+ * counters.  These counters allow _xfs_filestream_pick_ag() to tell whether a
+ * particular AG already has active filestreams associated with it. The mount
+ * point's m_peraglock is used to protect these counters from per-ag array
+ * re-allocation during a growfs operation.  When xfs_growfs_data_private() is
+ * about to reallocate the array, it calls xfs_filestream_flush() with the
+ * m_peraglock held in write mode.
+ *
+ * Since xfs_mru_cache_flush() guarantees that all the free functions for all
+ * the cache elements have finished executing before it returns, it's safe for
+ * the free functions to use the atomic counters without m_peraglock protection.
+ * This allows the implementation of xfs_fstrm_free_func() to be agnostic about
+ * whether it was called with the m_peraglock held in read mode, write mode or
+ * not held at all.  The race condition this addresses is the following:
+ *
+ *  - The work queue scheduler fires and pulls a filestream directory cache
+ *    element off the LRU end of the cache for deletion, then gets pre-empted.
+ *  - A growfs operation grabs the m_peraglock in write mode, flushes all the
+ *    remaining items from the cache and reallocates the mount point's per-ag
+ *    array, resetting all the counters to zero.
+ *  - The work queue thread resumes and calls the free function for the element
+ *    it started cleaning up earlier.  In the process it decrements the
+ *    filestreams counter for an AG that now has no references.
+ *
+ * With a shrinkfs feature, the above scenario could panic the system.
+ *
+ * All other uses of the following macros should be protected by either the
+ * m_peraglock held in read mode, or the cache's internal locking exposed by the
+ * interval between a call to xfs_mru_cache_lookup() and a call to
+ * xfs_mru_cache_done().  In addition, the m_peraglock must be held in read mode
+ * when new elements are added to the cache.
+ *
+ * Combined, these locking rules ensure that no associations will ever exist in
+ * the cache that reference per-ag array elements that have since been
+ * reallocated.
+ */
+static int
+xfs_filestream_peek_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+	int		ret;
+
+	pag = xfs_perag_get(mp, agno);
+	ret = atomic_read(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+	return ret;
+}
+
+static int
+xfs_filestream_get_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+	int		ret;
+
+	pag = xfs_perag_get(mp, agno);
+	ret = atomic_inc_return(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+	return ret;
+}
+
+static void
+xfs_filestream_put_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+
+	pag = xfs_perag_get(mp, agno);
+	atomic_dec(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+}
 
 /*
  * Scan the AGs starting at startag looking for an AG that isn't in use and has
@@ -355,16 +427,14 @@ xfs_fstrm_free_func(
 {
 	fstrm_item_t	*item  = (fstrm_item_t *)data;
 	xfs_inode_t	*ip = item->ip;
-	int ref;
 
 	ASSERT(ip->i_ino == ino);
 
 	xfs_iflags_clear(ip, XFS_IFILESTREAM);
 
 	/* Drop the reference taken on the AG when the item was added. */
-	ref = xfs_filestream_put_ag(ip->i_mount, item->ag);
+	xfs_filestream_put_ag(ip->i_mount, item->ag);
 
-	ASSERT(ref >= 0);
 	TRACE_FREE(ip->i_mount, ip, item->pip, item->ag,
 		xfs_filestream_peek_ag(ip->i_mount, item->ag));
 
diff --git a/fs/xfs/xfs_filestream.h b/fs/xfs/xfs_filestream.h
index 260f757bbc5..09dd9af4543 100644
--- a/fs/xfs/xfs_filestream.h
+++ b/fs/xfs/xfs_filestream.h
@@ -42,88 +42,6 @@ extern ktrace_t *xfs_filestreams_trace_buf;
 
 #endif
 
-/*
- * Allocation group filestream associations are tracked with per-ag atomic
- * counters.  These counters allow _xfs_filestream_pick_ag() to tell whether a
- * particular AG already has active filestreams associated with it. The mount
- * point's m_peraglock is used to protect these counters from per-ag array
- * re-allocation during a growfs operation.  When xfs_growfs_data_private() is
- * about to reallocate the array, it calls xfs_filestream_flush() with the
- * m_peraglock held in write mode.
- *
- * Since xfs_mru_cache_flush() guarantees that all the free functions for all
- * the cache elements have finished executing before it returns, it's safe for
- * the free functions to use the atomic counters without m_peraglock protection.
- * This allows the implementation of xfs_fstrm_free_func() to be agnostic about
- * whether it was called with the m_peraglock held in read mode, write mode or
- * not held at all.  The race condition this addresses is the following:
- *
- *  - The work queue scheduler fires and pulls a filestream directory cache
- *    element off the LRU end of the cache for deletion, then gets pre-empted.
- *  - A growfs operation grabs the m_peraglock in write mode, flushes all the
- *    remaining items from the cache and reallocates the mount point's per-ag
- *    array, resetting all the counters to zero.
- *  - The work queue thread resumes and calls the free function for the element
- *    it started cleaning up earlier.  In the process it decrements the
- *    filestreams counter for an AG that now has no references.
- *
- * With a shrinkfs feature, the above scenario could panic the system.
- *
- * All other uses of the following macros should be protected by either the
- * m_peraglock held in read mode, or the cache's internal locking exposed by the
- * interval between a call to xfs_mru_cache_lookup() and a call to
- * xfs_mru_cache_done().  In addition, the m_peraglock must be held in read mode
- * when new elements are added to the cache.
- *
- * Combined, these locking rules ensure that no associations will ever exist in
- * the cache that reference per-ag array elements that have since been
- * reallocated.
- */
-/*
- * xfs_filestream_peek_ag is only used in tracing code
- */
-static inline int
-xfs_filestream_peek_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_read(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
-static inline int
-xfs_filestream_get_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_inc_return(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
-static inline int
-xfs_filestream_put_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_dec_return(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
 /* allocation selection flags */
 typedef enum xfs_fstrm_alloc {
 	XFS_PICK_USERDATA = 1,
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 37a6f62c57b..dbca5f5c37b 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -626,8 +622,7 @@ xfs_fs_log_dummy(
 	ip = mp->m_rootip;
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	xfs_trans_set_sync(tp);
 	error = xfs_trans_commit(tp, 0);
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 9d884c127bb..abf80ae1e95 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -1203,6 +1199,63 @@ error0:
 	return error;
 }
 
+STATIC int
+xfs_imap_lookup(
+	struct xfs_mount	*mp,
+	struct xfs_trans	*tp,
+	xfs_agnumber_t		agno,
+	xfs_agino_t		agino,
+	xfs_agblock_t		agbno,
+	xfs_agblock_t		*chunk_agbno,
+	xfs_agblock_t		*offset_agbno,
+	int			flags)
+{
+	struct xfs_inobt_rec_incore rec;
+	struct xfs_btree_cur	*cur;
+	struct xfs_buf		*agbp;
+	xfs_agino_t		startino;
+	int			error;
+	int			i;
+
+	error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
+	if (error) {
+		xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
+				"xfs_ialloc_read_agi() returned "
+				"error %d, agno %d",
+				error, agno);
+		return error;
+	}
+
+	/*
+	 * derive and lookup the exact inode record for the given agino. If the
+	 * record cannot be found, then it's an invalid inode number and we
+	 * should abort.
+	 */
+	cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
+	startino = agino & ~(XFS_IALLOC_INODES(mp) - 1);
+	error = xfs_inobt_lookup(cur, startino, XFS_LOOKUP_EQ, &i);
+	if (!error) {
+		if (i)
+			error = xfs_inobt_get_rec(cur, &rec, &i);
+		if (!error && i == 0)
+			error = EINVAL;
+	}
+
+	xfs_trans_brelse(tp, agbp);
+	xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+	if (error)
+		return error;
+
+	/* for untrusted inodes check it is allocated first */
+	if ((flags & XFS_IGET_UNTRUSTED) &&
+	    (rec.ir_free & XFS_INOBT_MASK(agino - rec.ir_startino)))
+		return EINVAL;
+
+	*chunk_agbno = XFS_AGINO_TO_AGBNO(mp, rec.ir_startino);
+	*offset_agbno = agbno - *chunk_agbno;
+	return 0;
+}
+
 /*
  * Return the location of the inode in imap, for mapping it into a buffer.
  */
@@ -1235,8 +1288,11 @@ xfs_imap(
 	if (agno >= mp->m_sb.sb_agcount || agbno >= mp->m_sb.sb_agblocks ||
 	    ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
 #ifdef DEBUG
-		/* no diagnostics for bulkstat, ino comes from userspace */
-		if (flags & XFS_IGET_BULKSTAT)
+		/*
+		 * Don't output diagnostic information for untrusted inodes
+		 * as they can be invalid without implying corruption.
+		 */
+		if (flags & XFS_IGET_UNTRUSTED)
 			return XFS_ERROR(EINVAL);
 		if (agno >= mp->m_sb.sb_agcount) {
 			xfs_fs_cmn_err(CE_ALERT, mp,
@@ -1263,6 +1319,23 @@ xfs_imap(
 		return XFS_ERROR(EINVAL);
 	}
 
+	blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
+
+	/*
+	 * For bulkstat and handle lookups, we have an untrusted inode number
+	 * that we have to verify is valid. We cannot do this just by reading
+	 * the inode buffer as it may have been unlinked and removed leaving
+	 * inodes in stale state on disk. Hence we have to do a btree lookup
+	 * in all cases where an untrusted inode number is passed.
+	 */
+	if (flags & XFS_IGET_UNTRUSTED) {
+		error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+					&chunk_agbno, &offset_agbno, flags);
+		if (error)
+			return error;
+		goto out_map;
+	}
+
 	/*
 	 * If the inode cluster size is the same as the blocksize or
 	 * smaller we get to the buffer by simple arithmetics.
@@ -1277,24 +1350,6 @@ xfs_imap(
 		return 0;
 	}
 
-	blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
-
-	/*
-	 * If we get a block number passed from bulkstat we can use it to
-	 * find the buffer easily.
-	 */
-	if (imap->im_blkno) {
-		offset = XFS_INO_TO_OFFSET(mp, ino);
-		ASSERT(offset < mp->m_sb.sb_inopblock);
-
-		cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
-		offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
-
-		imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
-		imap->im_boffset = (ushort)(offset << mp->m_sb.sb_inodelog);
-		return 0;
-	}
-
 	/*
 	 * If the inode chunks are aligned then use simple maths to
 	 * find the location. Otherwise we have to do a btree
@@ -1304,50 +1359,13 @@ xfs_imap(
 		offset_agbno = agbno & mp->m_inoalign_mask;
 		chunk_agbno = agbno - offset_agbno;
 	} else {
-		xfs_btree_cur_t	*cur;	/* inode btree cursor */
-		xfs_inobt_rec_incore_t chunk_rec;
-		xfs_buf_t	*agbp;	/* agi buffer */
-		int		i;	/* temp state */
-
-		error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_ialloc_read_agi() returned "
-					"error %d, agno %d",
-					error, agno);
-			return error;
-		}
-
-		cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
-		error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_lookup() failed");
-			goto error0;
-		}
-
-		error = xfs_inobt_get_rec(cur, &chunk_rec, &i);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_get_rec() failed");
-			goto error0;
-		}
-		if (i == 0) {
-#ifdef DEBUG
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_get_rec() failed");
-#endif /* DEBUG */
-			error = XFS_ERROR(EINVAL);
-		}
- error0:
-		xfs_trans_brelse(tp, agbp);
-		xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+		error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+					&chunk_agbno, &offset_agbno, flags);
 		if (error)
 			return error;
-		chunk_agbno = XFS_AGINO_TO_AGBNO(mp, chunk_rec.ir_startino);
-		offset_agbno = agbno - chunk_agbno;
 	}
 
+out_map:
 	ASSERT(agbno >= chunk_agbno);
 	cluster_agbno = chunk_agbno +
 		((offset_agbno / blks_per_cluster) * blks_per_cluster);
diff --git a/fs/xfs/xfs_ialloc_btree.c b/fs/xfs/xfs_ialloc_btree.c
index c282a9af539..d352862cefa 100644
--- a/fs/xfs/xfs_ialloc_btree.c
+++ b/fs/xfs/xfs_ialloc_btree.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 6845db90818..b1ecc6f97ad 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -25,14 +25,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -95,7 +91,7 @@ xfs_inode_alloc(
 	return ip;
 }
 
-STATIC void
+void
 xfs_inode_free(
 	struct xfs_inode	*ip)
 {
@@ -212,7 +208,7 @@ xfs_iget_cache_hit(
 			ip->i_flags &= ~XFS_INEW;
 			ip->i_flags |= XFS_IRECLAIMABLE;
 			__xfs_inode_set_reclaim_tag(pag, ip);
-			trace_xfs_iget_reclaim(ip);
+			trace_xfs_iget_reclaim_fail(ip);
 			goto out_error;
 		}
 
@@ -227,6 +223,7 @@ xfs_iget_cache_hit(
 	} else {
 		/* If the VFS inode is being torn down, pause and try again. */
 		if (!igrab(inode)) {
+			trace_xfs_iget_skip(ip);
 			error = EAGAIN;
 			goto out_error;
 		}
@@ -234,6 +231,7 @@ xfs_iget_cache_hit(
 		/* We've got a live one. */
 		spin_unlock(&ip->i_flags_lock);
 		read_unlock(&pag->pag_ici_lock);
+		trace_xfs_iget_hit(ip);
 	}
 
 	if (lock_flags != 0)
@@ -242,7 +240,6 @@ xfs_iget_cache_hit(
 	xfs_iflags_clear(ip, XFS_ISTALE);
 	XFS_STATS_INC(xs_ig_found);
 
-	trace_xfs_iget_found(ip);
 	return 0;
 
 out_error:
@@ -259,24 +256,22 @@ xfs_iget_cache_miss(
 	xfs_trans_t		*tp,
 	xfs_ino_t		ino,
 	struct xfs_inode	**ipp,
-	xfs_daddr_t		bno,
 	int			flags,
 	int			lock_flags)
 {
 	struct xfs_inode	*ip;
 	int			error;
-	unsigned long		first_index, mask;
 	xfs_agino_t		agino = XFS_INO_TO_AGINO(mp, ino);
 
 	ip = xfs_inode_alloc(mp, ino);
 	if (!ip)
 		return ENOMEM;
 
-	error = xfs_iread(mp, tp, ip, bno, flags);
+	error = xfs_iread(mp, tp, ip, flags);
 	if (error)
 		goto out_destroy;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_iget_miss(ip);
 
 	if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
 		error = ENOENT;
@@ -302,8 +297,6 @@ xfs_iget_cache_miss(
 			BUG();
 	}
 
-	mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
-	first_index = agino & mask;
 	write_lock(&pag->pag_ici_lock);
 
 	/* insert the new inode */
@@ -322,7 +315,6 @@ xfs_iget_cache_miss(
 	write_unlock(&pag->pag_ici_lock);
 	radix_tree_preload_end();
 
-	trace_xfs_iget_alloc(ip);
 	*ipp = ip;
 	return 0;
 
@@ -358,8 +350,6 @@ out_destroy:
  *        within the file system for the inode being requested.
  * lock_flags -- flags indicating how to lock the inode.  See the comment
  *		 for xfs_ilock() for a list of valid values.
- * bno -- the block number starting the buffer containing the inode,
- *	  if known (as by bulkstat), else 0.
  */
 int
 xfs_iget(
@@ -368,8 +358,7 @@ xfs_iget(
 	xfs_ino_t	ino,
 	uint		flags,
 	uint		lock_flags,
-	xfs_inode_t	**ipp,
-	xfs_daddr_t	bno)
+	xfs_inode_t	**ipp)
 {
 	xfs_inode_t	*ip;
 	int		error;
@@ -382,9 +371,6 @@ xfs_iget(
 
 	/* get the perag structure and ensure that it's inode capable */
 	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
-	if (!pag->pagi_inodeok)
-		return EINVAL;
-	ASSERT(pag->pag_ici_init);
 	agino = XFS_INO_TO_AGINO(mp, ino);
 
 again:
@@ -400,7 +386,7 @@ again:
 		read_unlock(&pag->pag_ici_lock);
 		XFS_STATS_INC(xs_ig_missed);
 
-		error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip, bno,
+		error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
 							flags, lock_flags);
 		if (error)
 			goto out_error_or_again;
@@ -429,97 +415,6 @@ out_error_or_again:
 }
 
 /*
- * Decrement reference count of an inode structure and unlock it.
- *
- * ip -- the inode being released
- * lock_flags -- this parameter indicates the inode's locks to be
- *       to be released.  See the comment on xfs_iunlock() for a list
- *	 of valid values.
- */
-void
-xfs_iput(xfs_inode_t	*ip,
-	 uint		lock_flags)
-{
-	xfs_itrace_entry(ip);
-	xfs_iunlock(ip, lock_flags);
-	IRELE(ip);
-}
-
-/*
- * Special iput for brand-new inodes that are still locked
- */
-void
-xfs_iput_new(
-	xfs_inode_t	*ip,
-	uint		lock_flags)
-{
-	struct inode	*inode = VFS_I(ip);
-
-	xfs_itrace_entry(ip);
-
-	if ((ip->i_d.di_mode == 0)) {
-		ASSERT(!xfs_iflags_test(ip, XFS_IRECLAIMABLE));
-		make_bad_inode(inode);
-	}
-	if (inode->i_state & I_NEW)
-		unlock_new_inode(inode);
-	if (lock_flags)
-		xfs_iunlock(ip, lock_flags);
-	IRELE(ip);
-}
-
-/*
- * This is called free all the memory associated with an inode.
- * It must free the inode itself and any buffers allocated for
- * if_extents/if_data and if_broot.  It must also free the lock
- * associated with the inode.
- *
- * Note: because we don't initialise everything on reallocation out
- * of the zone, we must ensure we nullify everything correctly before
- * freeing the structure.
- */
-void
-xfs_ireclaim(
-	struct xfs_inode	*ip)
-{
-	struct xfs_mount	*mp = ip->i_mount;
-	struct xfs_perag	*pag;
-	xfs_agino_t		agino = XFS_INO_TO_AGINO(mp, ip->i_ino);
-
-	XFS_STATS_INC(xs_ig_reclaims);
-
-	/*
-	 * Remove the inode from the per-AG radix tree.
-	 *
-	 * Because radix_tree_delete won't complain even if the item was never
-	 * added to the tree assert that it's been there before to catch
-	 * problems with the inode life time early on.
-	 */
-	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
-	write_lock(&pag->pag_ici_lock);
-	if (!radix_tree_delete(&pag->pag_ici_root, agino))
-		ASSERT(0);
-	write_unlock(&pag->pag_ici_lock);
-	xfs_perag_put(pag);
-
-	/*
-	 * Here we do an (almost) spurious inode lock in order to coordinate
-	 * with inode cache radix tree lookups.  This is because the lookup
-	 * can reference the inodes in the cache without taking references.
-	 *
-	 * We make that OK here by ensuring that we wait until the inode is
-	 * unlocked after the lookup before we go ahead and free it.  We get
-	 * both the ilock and the iolock because the code may need to drop the
-	 * ilock one but will still hold the iolock.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_qm_dqdetach(ip);
-	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	xfs_inode_free(ip);
-}
-
-/*
  * This is a wrapper routine around the xfs_ilock() routine
  * used to centralize some grungy code.  It is used in places
  * that wish to lock the inode solely for reading the extents.
@@ -744,30 +639,24 @@ xfs_ilock_demote(
 }
 
 #ifdef DEBUG
-/*
- * Debug-only routine, without additional rw_semaphore APIs, we can
- * now only answer requests regarding whether we hold the lock for write
- * (reader state is outside our visibility, we only track writer state).
- *
- * Note: this means !xfs_isilocked would give false positives, so don't do that.
- */
 int
 xfs_isilocked(
 	xfs_inode_t		*ip,
 	uint			lock_flags)
 {
-	if ((lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) ==
-			XFS_ILOCK_EXCL) {
-		if (!ip->i_lock.mr_writer)
-			return 0;
+	if (lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) {
+		if (!(lock_flags & XFS_ILOCK_SHARED))
+			return !!ip->i_lock.mr_writer;
+		return rwsem_is_locked(&ip->i_lock.mr_lock);
 	}
 
-	if ((lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) ==
-			XFS_IOLOCK_EXCL) {
-		if (!ip->i_iolock.mr_writer)
-			return 0;
+	if (lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) {
+		if (!(lock_flags & XFS_IOLOCK_SHARED))
+			return !!ip->i_iolock.mr_writer;
+		return rwsem_is_locked(&ip->i_iolock.mr_lock);
 	}
 
-	return 1;
+	ASSERT(0);
+	return 0;
 }
 #endif
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 8cd6e8d8fe9..68415cb4f23 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -27,13 +27,10 @@
 #include "xfs_trans_priv.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -44,7 +41,6 @@
 #include "xfs_alloc.h"
 #include "xfs_ialloc.h"
 #include "xfs_bmap.h"
-#include "xfs_rw.h"
 #include "xfs_error.h"
 #include "xfs_utils.h"
 #include "xfs_quota.h"
@@ -177,7 +173,7 @@ xfs_imap_to_bp(
 		if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
 						XFS_ERRTAG_ITOBP_INOTOBP,
 						XFS_RANDOM_ITOBP_INOTOBP))) {
-			if (iget_flags & XFS_IGET_BULKSTAT) {
+			if (iget_flags & XFS_IGET_UNTRUSTED) {
 				xfs_trans_brelse(tp, bp);
 				return XFS_ERROR(EINVAL);
 			}
@@ -426,7 +422,7 @@ xfs_iformat(
 	if (!XFS_DFORK_Q(dip))
 		return 0;
 	ASSERT(ip->i_afp == NULL);
-	ip->i_afp = kmem_zone_zalloc(xfs_ifork_zone, KM_SLEEP);
+	ip->i_afp = kmem_zone_zalloc(xfs_ifork_zone, KM_SLEEP | KM_NOFS);
 	ip->i_afp->if_ext_max =
 		XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
 	switch (dip->di_aformat) {
@@ -509,7 +505,7 @@ xfs_iformat_local(
 		ifp->if_u1.if_data = ifp->if_u2.if_inline_data;
 	else {
 		real_size = roundup(size, 4);
-		ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+		ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP | KM_NOFS);
 	}
 	ifp->if_bytes = size;
 	ifp->if_real_bytes = real_size;
@@ -636,7 +632,7 @@ xfs_iformat_btree(
 	}
 
 	ifp->if_broot_bytes = size;
-	ifp->if_broot = kmem_alloc(size, KM_SLEEP);
+	ifp->if_broot = kmem_alloc(size, KM_SLEEP | KM_NOFS);
 	ASSERT(ifp->if_broot != NULL);
 	/*
 	 * Copy and convert from the on-disk structure
@@ -787,7 +783,6 @@ xfs_iread(
 	xfs_mount_t	*mp,
 	xfs_trans_t	*tp,
 	xfs_inode_t	*ip,
-	xfs_daddr_t	bno,
 	uint		iget_flags)
 {
 	xfs_buf_t	*bp;
@@ -797,11 +792,9 @@ xfs_iread(
 	/*
 	 * Fill in the location information in the in-core inode.
 	 */
-	ip->i_imap.im_blkno = bno;
 	error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags);
 	if (error)
 		return error;
-	ASSERT(bno == 0 || bno == ip->i_imap.im_blkno);
 
 	/*
 	 * Get pointers to the on-disk inode and the buffer containing it.
@@ -925,7 +918,6 @@ xfs_iread_extents(
 	int		error;
 	xfs_ifork_t	*ifp;
 	xfs_extnum_t	nextents;
-	size_t		size;
 
 	if (unlikely(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)) {
 		XFS_ERROR_REPORT("xfs_iread_extents", XFS_ERRLEVEL_LOW,
@@ -933,7 +925,6 @@ xfs_iread_extents(
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 	nextents = XFS_IFORK_NEXTENTS(ip, whichfork);
-	size = nextents * sizeof(xfs_bmbt_rec_t);
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 
 	/*
@@ -1229,7 +1220,7 @@ xfs_isize_check(
 				       (xfs_ufsize_t)XFS_MAXIOFFSET(mp)) -
 			  map_first),
 			 XFS_BMAPI_ENTIRE, NULL, 0, imaps, &nimaps,
-			 NULL, NULL))
+			 NULL))
 	    return;
 	ASSERT(nimaps == 1);
 	ASSERT(imaps[0].br_startblock == HOLESTARTBLOCK);
@@ -1463,7 +1454,7 @@ xfs_itruncate_finish(
 	ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
 	ASSERT(ip->i_transp == *tp);
 	ASSERT(ip->i_itemp != NULL);
-	ASSERT(ip->i_itemp->ili_flags & XFS_ILI_HOLD);
+	ASSERT(ip->i_itemp->ili_lock_flags == 0);
 
 
 	ntp = *tp;
@@ -1592,11 +1583,10 @@ xfs_itruncate_finish(
 		xfs_bmap_init(&free_list, &first_block);
 		error = xfs_bunmapi(ntp, ip,
 				    first_unmap_block, unmap_len,
-				    xfs_bmapi_aflag(fork) |
-				      (sync ? 0 : XFS_BMAPI_ASYNC),
+				    xfs_bmapi_aflag(fork),
 				    XFS_ITRUNC_MAX_EXTENTS,
 				    &first_block, &free_list,
-				    NULL, &done);
+				    &done);
 		if (error) {
 			/*
 			 * If the bunmapi call encounters an error,
@@ -1615,12 +1605,8 @@ xfs_itruncate_finish(
 		 */
 		error = xfs_bmap_finish(tp, &free_list, &committed);
 		ntp = *tp;
-		if (committed) {
-			/* link the inode into the next xact in the chain */
-			xfs_trans_ijoin(ntp, ip,
-					XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-			xfs_trans_ihold(ntp, ip);
-		}
+		if (committed)
+			xfs_trans_ijoin(ntp, ip);
 
 		if (error) {
 			/*
@@ -1649,9 +1635,7 @@ xfs_itruncate_finish(
 		error = xfs_trans_commit(*tp, 0);
 		*tp = ntp;
 
-		/* link the inode into the next transaction in the chain */
-		xfs_trans_ijoin(ntp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-		xfs_trans_ihold(ntp, ip);
+		xfs_trans_ijoin(ntp, ip);
 
 		if (error)
 			return error;
@@ -1940,10 +1924,10 @@ xfs_ifree_cluster(
 	int			blks_per_cluster;
 	int			nbufs;
 	int			ninodes;
-	int			i, j, found, pre_flushed;
+	int			i, j;
 	xfs_daddr_t		blkno;
 	xfs_buf_t		*bp;
-	xfs_inode_t		*ip, **ip_found;
+	xfs_inode_t		*ip;
 	xfs_inode_log_item_t	*iip;
 	xfs_log_item_t		*lip;
 	struct xfs_perag	*pag;
@@ -1960,114 +1944,97 @@ xfs_ifree_cluster(
 		nbufs = XFS_IALLOC_BLOCKS(mp) / blks_per_cluster;
 	}
 
-	ip_found = kmem_alloc(ninodes * sizeof(xfs_inode_t *), KM_NOFS);
-
 	for (j = 0; j < nbufs; j++, inum += ninodes) {
+		int	found = 0;
+
 		blkno = XFS_AGB_TO_DADDR(mp, XFS_INO_TO_AGNO(mp, inum),
 					 XFS_INO_TO_AGBNO(mp, inum));
 
+		/*
+		 * We obtain and lock the backing buffer first in the process
+		 * here, as we have to ensure that any dirty inode that we
+		 * can't get the flush lock on is attached to the buffer.
+		 * If we scan the in-memory inodes first, then buffer IO can
+		 * complete before we get a lock on it, and hence we may fail
+		 * to mark all the active inodes on the buffer stale.
+		 */
+		bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
+					mp->m_bsize * blks_per_cluster,
+					XBF_LOCK);
 
 		/*
-		 * Look for each inode in memory and attempt to lock it,
-		 * we can be racing with flush and tail pushing here.
-		 * any inode we get the locks on, add to an array of
-		 * inode items to process later.
+		 * Walk the inodes already attached to the buffer and mark them
+		 * stale. These will all have the flush locks held, so an
+		 * in-memory inode walk can't lock them.
+		 */
+		lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
+		while (lip) {
+			if (lip->li_type == XFS_LI_INODE) {
+				iip = (xfs_inode_log_item_t *)lip;
+				ASSERT(iip->ili_logged == 1);
+				lip->li_cb = xfs_istale_done;
+				xfs_trans_ail_copy_lsn(mp->m_ail,
+							&iip->ili_flush_lsn,
+							&iip->ili_item.li_lsn);
+				xfs_iflags_set(iip->ili_inode, XFS_ISTALE);
+				found++;
+			}
+			lip = lip->li_bio_list;
+		}
+
+		/*
+		 * For each inode in memory attempt to add it to the inode
+		 * buffer and set it up for being staled on buffer IO
+		 * completion.  This is safe as we've locked out tail pushing
+		 * and flushing by locking the buffer.
 		 *
-		 * The get the buffer lock, we could beat a flush
-		 * or tail pushing thread to the lock here, in which
-		 * case they will go looking for the inode buffer
-		 * and fail, we need some other form of interlock
-		 * here.
+		 * We have already marked every inode that was part of a
+		 * transaction stale above, which means there is no point in
+		 * even trying to lock them.
 		 */
-		found = 0;
 		for (i = 0; i < ninodes; i++) {
 			read_lock(&pag->pag_ici_lock);
 			ip = radix_tree_lookup(&pag->pag_ici_root,
 					XFS_INO_TO_AGINO(mp, (inum + i)));
 
-			/* Inode not in memory or we found it already,
-			 * nothing to do
-			 */
+			/* Inode not in memory or stale, nothing to do */
 			if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
 				read_unlock(&pag->pag_ici_lock);
 				continue;
 			}
 
-			if (xfs_inode_clean(ip)) {
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-
-			/* If we can get the locks then add it to the
-			 * list, otherwise by the time we get the bp lock
-			 * below it will already be attached to the
-			 * inode buffer.
-			 */
-
-			/* This inode will already be locked - by us, lets
-			 * keep it that way.
-			 */
-
-			if (ip == free_ip) {
-				if (xfs_iflock_nowait(ip)) {
-					xfs_iflags_set(ip, XFS_ISTALE);
-					if (xfs_inode_clean(ip)) {
-						xfs_ifunlock(ip);
-					} else {
-						ip_found[found++] = ip;
-					}
-				}
+			/* don't try to lock/unlock the current inode */
+			if (ip != free_ip &&
+			    !xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
 				read_unlock(&pag->pag_ici_lock);
 				continue;
 			}
+			read_unlock(&pag->pag_ici_lock);
 
-			if (xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				if (xfs_iflock_nowait(ip)) {
-					xfs_iflags_set(ip, XFS_ISTALE);
-
-					if (xfs_inode_clean(ip)) {
-						xfs_ifunlock(ip);
-						xfs_iunlock(ip, XFS_ILOCK_EXCL);
-					} else {
-						ip_found[found++] = ip;
-					}
-				} else {
+			if (!xfs_iflock_nowait(ip)) {
+				if (ip != free_ip)
 					xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				}
+				continue;
 			}
-			read_unlock(&pag->pag_ici_lock);
-		}
-
-		bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno, 
-					mp->m_bsize * blks_per_cluster,
-					XBF_LOCK);
 
-		pre_flushed = 0;
-		lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
-		while (lip) {
-			if (lip->li_type == XFS_LI_INODE) {
-				iip = (xfs_inode_log_item_t *)lip;
-				ASSERT(iip->ili_logged == 1);
-				lip->li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*)) xfs_istale_done;
-				xfs_trans_ail_copy_lsn(mp->m_ail,
-							&iip->ili_flush_lsn,
-							&iip->ili_item.li_lsn);
-				xfs_iflags_set(iip->ili_inode, XFS_ISTALE);
-				pre_flushed++;
+			xfs_iflags_set(ip, XFS_ISTALE);
+			if (xfs_inode_clean(ip)) {
+				ASSERT(ip != free_ip);
+				xfs_ifunlock(ip);
+				xfs_iunlock(ip, XFS_ILOCK_EXCL);
+				continue;
 			}
-			lip = lip->li_bio_list;
-		}
 
-		for (i = 0; i < found; i++) {
-			ip = ip_found[i];
 			iip = ip->i_itemp;
-
 			if (!iip) {
+				/* inode with unlogged changes only */
+				ASSERT(ip != free_ip);
 				ip->i_update_core = 0;
 				xfs_ifunlock(ip);
 				xfs_iunlock(ip, XFS_ILOCK_EXCL);
 				continue;
 			}
+			found++;
 
 			iip->ili_last_fields = iip->ili_format.ilf_fields;
 			iip->ili_format.ilf_fields = 0;
@@ -2075,20 +2042,18 @@ xfs_ifree_cluster(
 			xfs_trans_ail_copy_lsn(mp->m_ail, &iip->ili_flush_lsn,
 						&iip->ili_item.li_lsn);
 
-			xfs_buf_attach_iodone(bp,
-				(void(*)(xfs_buf_t*,xfs_log_item_t*))
-				xfs_istale_done, (xfs_log_item_t *)iip);
-			if (ip != free_ip) {
+			xfs_buf_attach_iodone(bp, xfs_istale_done,
+						  &iip->ili_item);
+
+			if (ip != free_ip)
 				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-			}
 		}
 
-		if (found || pre_flushed)
+		if (found)
 			xfs_trans_stale_inode_buf(tp, bp);
 		xfs_trans_binval(tp, bp);
 	}
 
-	kmem_free(ip_found);
 	xfs_perag_put(pag);
 }
 
@@ -2224,7 +2189,7 @@ xfs_iroot_realloc(
 		 */
 		if (ifp->if_broot_bytes == 0) {
 			new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(rec_diff);
-			ifp->if_broot = kmem_alloc(new_size, KM_SLEEP);
+			ifp->if_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS);
 			ifp->if_broot_bytes = (int)new_size;
 			return;
 		}
@@ -2240,7 +2205,7 @@ xfs_iroot_realloc(
 		new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(new_max);
 		ifp->if_broot = kmem_realloc(ifp->if_broot, new_size,
 				(size_t)XFS_BMAP_BROOT_SPACE_CALC(cur_max), /* old size */
-				KM_SLEEP);
+				KM_SLEEP | KM_NOFS);
 		op = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1,
 						     ifp->if_broot_bytes);
 		np = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1,
@@ -2266,7 +2231,7 @@ xfs_iroot_realloc(
 	else
 		new_size = 0;
 	if (new_size > 0) {
-		new_broot = kmem_alloc(new_size, KM_SLEEP);
+		new_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS);
 		/*
 		 * First copy over the btree block header.
 		 */
@@ -2370,7 +2335,8 @@ xfs_idata_realloc(
 		real_size = roundup(new_size, 4);
 		if (ifp->if_u1.if_data == NULL) {
 			ASSERT(ifp->if_real_bytes == 0);
-			ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+			ifp->if_u1.if_data = kmem_alloc(real_size,
+							KM_SLEEP | KM_NOFS);
 		} else if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) {
 			/*
 			 * Only do the realloc if the underlying size
@@ -2381,11 +2347,12 @@ xfs_idata_realloc(
 					kmem_realloc(ifp->if_u1.if_data,
 							real_size,
 							ifp->if_real_bytes,
-							KM_SLEEP);
+							KM_SLEEP | KM_NOFS);
 			}
 		} else {
 			ASSERT(ifp->if_real_bytes == 0);
-			ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+			ifp->if_u1.if_data = kmem_alloc(real_size,
+							KM_SLEEP | KM_NOFS);
 			memcpy(ifp->if_u1.if_data, ifp->if_u2.if_inline_data,
 				ifp->if_bytes);
 		}
@@ -2649,8 +2616,6 @@ xfs_iflush_cluster(
 	int			i;
 
 	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
-	ASSERT(pag->pagi_inodeok);
-	ASSERT(pag->pag_ici_init);
 
 	inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
 	ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
@@ -2754,7 +2719,6 @@ cluster_corrupt_out:
 		 * mark it as stale and brelse.
 		 */
 		if (XFS_BUF_IODONE_FUNC(bp)) {
-			XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 			XFS_BUF_UNDONE(bp);
 			XFS_BUF_STALE(bp);
 			XFS_BUF_ERROR(bp,EIO);
@@ -3092,8 +3056,7 @@ xfs_iflush_int(
 		 * and unlock the inode's flush lock when the inode is
 		 * completely written to disk.
 		 */
-		xfs_buf_attach_iodone(bp, (void(*)(xfs_buf_t*,xfs_log_item_t*))
-				      xfs_iflush_done, (xfs_log_item_t *)iip);
+		xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item);
 
 		ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL);
 		ASSERT(XFS_BUF_IODONE_FUNC(bp) != NULL);
@@ -3537,13 +3500,11 @@ xfs_iext_remove_indirect(
 	xfs_extnum_t	ext_diff;	/* extents to remove in current list */
 	xfs_extnum_t	nex1;		/* number of extents before idx */
 	xfs_extnum_t	nex2;		/* extents after idx + count */
-	int		nlists;		/* entries in indirection array */
 	int		page_idx = idx;	/* index in target extent list */
 
 	ASSERT(ifp->if_flags & XFS_IFEXTIREC);
 	erp = xfs_iext_idx_to_irec(ifp,  &page_idx, &erp_idx, 0);
 	ASSERT(erp != NULL);
-	nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
 	nex1 = page_idx;
 	ext_cnt = count;
 	while (ext_cnt) {
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 9965e40a461..0898c5417d1 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -442,9 +442,7 @@ static inline void xfs_ifunlock(xfs_inode_t *ip)
  * xfs_iget.c prototypes.
  */
 int		xfs_iget(struct xfs_mount *, struct xfs_trans *, xfs_ino_t,
-			 uint, uint, xfs_inode_t **, xfs_daddr_t);
-void		xfs_iput(xfs_inode_t *, uint);
-void		xfs_iput_new(xfs_inode_t *, uint);
+			 uint, uint, xfs_inode_t **);
 void		xfs_ilock(xfs_inode_t *, uint);
 int		xfs_ilock_nowait(xfs_inode_t *, uint);
 void		xfs_iunlock(xfs_inode_t *, uint);
@@ -452,7 +450,7 @@ void		xfs_ilock_demote(xfs_inode_t *, uint);
 int		xfs_isilocked(xfs_inode_t *, uint);
 uint		xfs_ilock_map_shared(xfs_inode_t *);
 void		xfs_iunlock_map_shared(xfs_inode_t *, uint);
-void		xfs_ireclaim(xfs_inode_t *);
+void		xfs_inode_free(struct xfs_inode *ip);
 
 /*
  * xfs_inode.c prototypes.
@@ -500,7 +498,7 @@ do { \
  * Flags for xfs_iget()
  */
 #define XFS_IGET_CREATE		0x1
-#define XFS_IGET_BULKSTAT	0x2
+#define XFS_IGET_UNTRUSTED	0x2
 
 int		xfs_inotobp(struct xfs_mount *, struct xfs_trans *,
 			    xfs_ino_t, struct xfs_dinode **,
@@ -509,7 +507,7 @@ int		xfs_itobp(struct xfs_mount *, struct xfs_trans *,
 			  struct xfs_inode *, struct xfs_dinode **,
 			  struct xfs_buf **, uint);
 int		xfs_iread(struct xfs_mount *, struct xfs_trans *,
-			  struct xfs_inode *, xfs_daddr_t, uint);
+			  struct xfs_inode *, uint);
 void		xfs_dinode_to_disk(struct xfs_dinode *,
 				   struct xfs_icdinode *);
 void		xfs_idestroy_fork(struct xfs_inode *, int);
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index cf8249a6000..fe00777e279 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -22,30 +22,26 @@
 #include "xfs_log.h"
 #include "xfs_inum.h"
 #include "xfs_trans.h"
-#include "xfs_buf_item.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
-#include "xfs_rw.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
 
 
 kmem_zone_t	*xfs_ili_zone;		/* inode log item zone */
 
+static inline struct xfs_inode_log_item *INODE_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_inode_log_item, ili_item);
+}
+
+
 /*
  * This returns the number of iovecs needed to log the given inode item.
  *
@@ -55,13 +51,11 @@ kmem_zone_t	*xfs_ili_zone;		/* inode log item zone */
  */
 STATIC uint
 xfs_inode_item_size(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	uint		nvecs;
-	xfs_inode_t	*ip;
-
-	ip = iip->ili_inode;
-	nvecs = 2;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	uint			nvecs = 2;
 
 	/*
 	 * Only log the data/extents/b-tree root if there is something
@@ -212,21 +206,17 @@ xfs_inode_item_size(
  */
 STATIC void
 xfs_inode_item_format(
-	xfs_inode_log_item_t	*iip,
-	xfs_log_iovec_t		*log_vector)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*vecp)
 {
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 	uint			nvecs;
-	xfs_log_iovec_t		*vecp;
-	xfs_inode_t		*ip;
 	size_t			data_bytes;
 	xfs_bmbt_rec_t		*ext_buffer;
-	int			nrecs;
 	xfs_mount_t		*mp;
 
-	ip = iip->ili_inode;
-	vecp = log_vector;
-
-	vecp->i_addr = (xfs_caddr_t)&iip->ili_format;
+	vecp->i_addr = &iip->ili_format;
 	vecp->i_len  = sizeof(xfs_inode_log_format_t);
 	vecp->i_type = XLOG_REG_TYPE_IFORMAT;
 	vecp++;
@@ -277,7 +267,7 @@ xfs_inode_item_format(
 	 */
 	xfs_synchronize_times(ip);
 
-	vecp->i_addr = (xfs_caddr_t)&ip->i_d;
+	vecp->i_addr = &ip->i_d;
 	vecp->i_len  = sizeof(struct xfs_icdinode);
 	vecp->i_type = XLOG_REG_TYPE_ICORE;
 	vecp++;
@@ -323,18 +313,17 @@ xfs_inode_item_format(
 			ASSERT(ip->i_df.if_u1.if_extents != NULL);
 			ASSERT(ip->i_d.di_nextents > 0);
 			ASSERT(iip->ili_extents_buf == NULL);
-			nrecs = ip->i_df.if_bytes /
-				(uint)sizeof(xfs_bmbt_rec_t);
-			ASSERT(nrecs > 0);
+			ASSERT((ip->i_df.if_bytes /
+				(uint)sizeof(xfs_bmbt_rec_t)) > 0);
 #ifdef XFS_NATIVE_HOST
-			if (nrecs == ip->i_d.di_nextents) {
+                       if (ip->i_d.di_nextents == ip->i_df.if_bytes /
+                                               (uint)sizeof(xfs_bmbt_rec_t)) {
 				/*
 				 * There are no delayed allocation
 				 * extents, so just point to the
 				 * real extents array.
 				 */
-				vecp->i_addr =
-					(char *)(ip->i_df.if_u1.if_extents);
+				vecp->i_addr = ip->i_df.if_u1.if_extents;
 				vecp->i_len = ip->i_df.if_bytes;
 				vecp->i_type = XLOG_REG_TYPE_IEXT;
 			} else
@@ -352,7 +341,7 @@ xfs_inode_item_format(
 				ext_buffer = kmem_alloc(ip->i_df.if_bytes,
 					KM_SLEEP);
 				iip->ili_extents_buf = ext_buffer;
-				vecp->i_addr = (xfs_caddr_t)ext_buffer;
+				vecp->i_addr = ext_buffer;
 				vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
 						XFS_DATA_FORK);
 				vecp->i_type = XLOG_REG_TYPE_IEXT;
@@ -371,7 +360,7 @@ xfs_inode_item_format(
 		if (iip->ili_format.ilf_fields & XFS_ILOG_DBROOT) {
 			ASSERT(ip->i_df.if_broot_bytes > 0);
 			ASSERT(ip->i_df.if_broot != NULL);
-			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_broot;
+			vecp->i_addr = ip->i_df.if_broot;
 			vecp->i_len = ip->i_df.if_broot_bytes;
 			vecp->i_type = XLOG_REG_TYPE_IBROOT;
 			vecp++;
@@ -389,7 +378,7 @@ xfs_inode_item_format(
 			ASSERT(ip->i_df.if_u1.if_data != NULL);
 			ASSERT(ip->i_d.di_size > 0);
 
-			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_u1.if_data;
+			vecp->i_addr = ip->i_df.if_u1.if_data;
 			/*
 			 * Round i_bytes up to a word boundary.
 			 * The underlying memory is guaranteed to
@@ -437,7 +426,7 @@ xfs_inode_item_format(
 	 * Assert that no attribute-related log flags are set.
 	 */
 	if (!XFS_IFORK_Q(ip)) {
-		ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
+		ASSERT(nvecs == lip->li_desc->lid_size);
 		iip->ili_format.ilf_size = nvecs;
 		ASSERT(!(iip->ili_format.ilf_fields &
 			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT | XFS_ILOG_AEXT)));
@@ -449,21 +438,21 @@ xfs_inode_item_format(
 		ASSERT(!(iip->ili_format.ilf_fields &
 			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT)));
 		if (iip->ili_format.ilf_fields & XFS_ILOG_AEXT) {
-			ASSERT(ip->i_afp->if_bytes > 0);
-			ASSERT(ip->i_afp->if_u1.if_extents != NULL);
-			ASSERT(ip->i_d.di_anextents > 0);
 #ifdef DEBUG
-			nrecs = ip->i_afp->if_bytes /
+			int nrecs = ip->i_afp->if_bytes /
 				(uint)sizeof(xfs_bmbt_rec_t);
-#endif
 			ASSERT(nrecs > 0);
 			ASSERT(nrecs == ip->i_d.di_anextents);
+			ASSERT(ip->i_afp->if_bytes > 0);
+			ASSERT(ip->i_afp->if_u1.if_extents != NULL);
+			ASSERT(ip->i_d.di_anextents > 0);
+#endif
 #ifdef XFS_NATIVE_HOST
 			/*
 			 * There are not delayed allocation extents
 			 * for attributes, so just point at the array.
 			 */
-			vecp->i_addr = (char *)(ip->i_afp->if_u1.if_extents);
+			vecp->i_addr = ip->i_afp->if_u1.if_extents;
 			vecp->i_len = ip->i_afp->if_bytes;
 #else
 			ASSERT(iip->ili_aextents_buf == NULL);
@@ -473,7 +462,7 @@ xfs_inode_item_format(
 			ext_buffer = kmem_alloc(ip->i_afp->if_bytes,
 				KM_SLEEP);
 			iip->ili_aextents_buf = ext_buffer;
-			vecp->i_addr = (xfs_caddr_t)ext_buffer;
+			vecp->i_addr = ext_buffer;
 			vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
 					XFS_ATTR_FORK);
 #endif
@@ -490,7 +479,7 @@ xfs_inode_item_format(
 		if (iip->ili_format.ilf_fields & XFS_ILOG_ABROOT) {
 			ASSERT(ip->i_afp->if_broot_bytes > 0);
 			ASSERT(ip->i_afp->if_broot != NULL);
-			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_broot;
+			vecp->i_addr = ip->i_afp->if_broot;
 			vecp->i_len = ip->i_afp->if_broot_bytes;
 			vecp->i_type = XLOG_REG_TYPE_IATTR_BROOT;
 			vecp++;
@@ -506,7 +495,7 @@ xfs_inode_item_format(
 			ASSERT(ip->i_afp->if_bytes > 0);
 			ASSERT(ip->i_afp->if_u1.if_data != NULL);
 
-			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_u1.if_data;
+			vecp->i_addr = ip->i_afp->if_u1.if_data;
 			/*
 			 * Round i_bytes up to a word boundary.
 			 * The underlying memory is guaranteed to
@@ -528,7 +517,7 @@ xfs_inode_item_format(
 		break;
 	}
 
-	ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
+	ASSERT(nvecs == lip->li_desc->lid_size);
 	iip->ili_format.ilf_size = nvecs;
 }
 
@@ -539,12 +528,14 @@ xfs_inode_item_format(
  */
 STATIC void
 xfs_inode_item_pin(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	ASSERT(xfs_isilocked(iip->ili_inode, XFS_ILOCK_EXCL));
+	struct xfs_inode	*ip = INODE_ITEM(lip)->ili_inode;
+
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 
-	trace_xfs_inode_pin(iip->ili_inode, _RET_IP_);
-	atomic_inc(&iip->ili_inode->i_pincount);
+	trace_xfs_inode_pin(ip, _RET_IP_);
+	atomic_inc(&ip->i_pincount);
 }
 
 
@@ -554,12 +545,12 @@ xfs_inode_item_pin(
  *
  * Also wake up anyone in xfs_iunpin_wait() if the count goes to 0.
  */
-/* ARGSUSED */
 STATIC void
 xfs_inode_item_unpin(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_inode	*ip = iip->ili_inode;
+	struct xfs_inode	*ip = INODE_ITEM(lip)->ili_inode;
 
 	trace_xfs_inode_unpin(ip, _RET_IP_);
 	ASSERT(atomic_read(&ip->i_pincount) > 0);
@@ -567,15 +558,6 @@ xfs_inode_item_unpin(
 		wake_up(&ip->i_ipin_wait);
 }
 
-/* ARGSUSED */
-STATIC void
-xfs_inode_item_unpin_remove(
-	xfs_inode_log_item_t	*iip,
-	xfs_trans_t		*tp)
-{
-	xfs_inode_item_unpin(iip);
-}
-
 /*
  * This is called to attempt to lock the inode associated with this
  * inode log item, in preparation for the push routine which does the actual
@@ -591,19 +573,16 @@ xfs_inode_item_unpin_remove(
  */
 STATIC uint
 xfs_inode_item_trylock(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	register xfs_inode_t	*ip;
-
-	ip = iip->ili_inode;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 
-	if (xfs_ipincount(ip) > 0) {
+	if (xfs_ipincount(ip) > 0)
 		return XFS_ITEM_PINNED;
-	}
 
-	if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED)) {
+	if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED))
 		return XFS_ITEM_LOCKED;
-	}
 
 	if (!xfs_iflock_nowait(ip)) {
 		/*
@@ -629,7 +608,7 @@ xfs_inode_item_trylock(
 	if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
 		ASSERT(iip->ili_format.ilf_fields != 0);
 		ASSERT(iip->ili_logged == 0);
-		ASSERT(iip->ili_item.li_flags & XFS_LI_IN_AIL);
+		ASSERT(lip->li_flags & XFS_LI_IN_AIL);
 	}
 #endif
 	return XFS_ITEM_SUCCESS;
@@ -643,26 +622,18 @@ xfs_inode_item_trylock(
  */
 STATIC void
 xfs_inode_item_unlock(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	uint		hold;
-	uint		iolocked;
-	uint		lock_flags;
-	xfs_inode_t	*ip;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	unsigned short		lock_flags;
 
-	ASSERT(iip != NULL);
 	ASSERT(iip->ili_inode->i_itemp != NULL);
 	ASSERT(xfs_isilocked(iip->ili_inode, XFS_ILOCK_EXCL));
-	ASSERT((!(iip->ili_inode->i_itemp->ili_flags &
-		  XFS_ILI_IOLOCKED_EXCL)) ||
-	       xfs_isilocked(iip->ili_inode, XFS_IOLOCK_EXCL));
-	ASSERT((!(iip->ili_inode->i_itemp->ili_flags &
-		  XFS_ILI_IOLOCKED_SHARED)) ||
-	       xfs_isilocked(iip->ili_inode, XFS_IOLOCK_SHARED));
+
 	/*
 	 * Clear the transaction pointer in the inode.
 	 */
-	ip = iip->ili_inode;
 	ip->i_transp = NULL;
 
 	/*
@@ -686,34 +657,11 @@ xfs_inode_item_unlock(
 		iip->ili_aextents_buf = NULL;
 	}
 
-	/*
-	 * Figure out if we should unlock the inode or not.
-	 */
-	hold = iip->ili_flags & XFS_ILI_HOLD;
-
-	/*
-	 * Before clearing out the flags, remember whether we
-	 * are holding the inode's IO lock.
-	 */
-	iolocked = iip->ili_flags & XFS_ILI_IOLOCKED_ANY;
-
-	/*
-	 * Clear out the fields of the inode log item particular
-	 * to the current transaction.
-	 */
-	iip->ili_flags = 0;
-
-	/*
-	 * Unlock the inode if XFS_ILI_HOLD was not set.
-	 */
-	if (!hold) {
-		lock_flags = XFS_ILOCK_EXCL;
-		if (iolocked & XFS_ILI_IOLOCKED_EXCL) {
-			lock_flags |= XFS_IOLOCK_EXCL;
-		} else if (iolocked & XFS_ILI_IOLOCKED_SHARED) {
-			lock_flags |= XFS_IOLOCK_SHARED;
-		}
-		xfs_iput(iip->ili_inode, lock_flags);
+	lock_flags = iip->ili_lock_flags;
+	iip->ili_lock_flags = 0;
+	if (lock_flags) {
+		xfs_iunlock(iip->ili_inode, lock_flags);
+		IRELE(iip->ili_inode);
 	}
 }
 
@@ -725,13 +673,12 @@ xfs_inode_item_unlock(
  * is the only one that matters.  Therefore, simply return the
  * given lsn.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_inode_item_committed(
-	xfs_inode_log_item_t	*iip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	return (lsn);
+	return lsn;
 }
 
 /*
@@ -743,13 +690,12 @@ xfs_inode_item_committed(
  */
 STATIC void
 xfs_inode_item_pushbuf(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	xfs_inode_t	*ip;
-	xfs_mount_t	*mp;
-	xfs_buf_t	*bp;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	struct xfs_buf		*bp;
 
-	ip = iip->ili_inode;
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
 
 	/*
@@ -757,14 +703,13 @@ xfs_inode_item_pushbuf(
 	 * inode was taken off the AIL. So, just get out.
 	 */
 	if (completion_done(&ip->i_flush) ||
-	    ((iip->ili_item.li_flags & XFS_LI_IN_AIL) == 0)) {
+	    !(lip->li_flags & XFS_LI_IN_AIL)) {
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
 		return;
 	}
 
-	mp = ip->i_mount;
-	bp = xfs_incore(mp->m_ddev_targp, iip->ili_format.ilf_blkno,
-		    iip->ili_format.ilf_len, XBF_TRYLOCK);
+	bp = xfs_incore(ip->i_mount->m_ddev_targp, iip->ili_format.ilf_blkno,
+			iip->ili_format.ilf_len, XBF_TRYLOCK);
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 	if (!bp)
@@ -772,10 +717,8 @@ xfs_inode_item_pushbuf(
 	if (XFS_BUF_ISDELAYWRITE(bp))
 		xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
-	return;
 }
 
-
 /*
  * This is called to asynchronously write the inode associated with this
  * inode log item out to disk. The inode will already have been locked by
@@ -783,14 +726,14 @@ xfs_inode_item_pushbuf(
  */
 STATIC void
 xfs_inode_item_push(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	xfs_inode_t	*ip;
-
-	ip = iip->ili_inode;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
 	ASSERT(!completion_done(&ip->i_flush));
+
 	/*
 	 * Since we were able to lock the inode's flush lock and
 	 * we found it on the AIL, the inode must be dirty.  This
@@ -813,43 +756,34 @@ xfs_inode_item_push(
 	 */
 	(void) xfs_iflush(ip, 0);
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	return;
 }
 
 /*
  * XXX rcc - this one really has to do something.  Probably needs
  * to stamp in a new field in the incore inode.
  */
-/* ARGSUSED */
 STATIC void
 xfs_inode_item_committing(
-	xfs_inode_log_item_t	*iip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	iip->ili_last_lsn = lsn;
-	return;
+	INODE_ITEM(lip)->ili_last_lsn = lsn;
 }
 
 /*
  * This is the ops vector shared by all buf log items.
  */
 static struct xfs_item_ops xfs_inode_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_inode_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_inode_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_inode_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_inode_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_inode_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_inode_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_inode_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_inode_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_inode_item_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))xfs_inode_item_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_inode_item_committing
+	.iop_size	= xfs_inode_item_size,
+	.iop_format	= xfs_inode_item_format,
+	.iop_pin	= xfs_inode_item_pin,
+	.iop_unpin	= xfs_inode_item_unpin,
+	.iop_trylock	= xfs_inode_item_trylock,
+	.iop_unlock	= xfs_inode_item_unlock,
+	.iop_committed	= xfs_inode_item_committed,
+	.iop_push	= xfs_inode_item_push,
+	.iop_pushbuf	= xfs_inode_item_pushbuf,
+	.iop_committing = xfs_inode_item_committing
 };
 
 
@@ -858,10 +792,10 @@ static struct xfs_item_ops xfs_inode_item_ops = {
  */
 void
 xfs_inode_item_init(
-	xfs_inode_t	*ip,
-	xfs_mount_t	*mp)
+	struct xfs_inode	*ip,
+	struct xfs_mount	*mp)
 {
-	xfs_inode_log_item_t	*iip;
+	struct xfs_inode_log_item *iip;
 
 	ASSERT(ip->i_itemp == NULL);
 	iip = ip->i_itemp = kmem_zone_zalloc(xfs_ili_zone, KM_SLEEP);
@@ -899,14 +833,14 @@ xfs_inode_item_destroy(
  * from the AIL if it has not been re-logged, and unlocking the inode's
  * flush lock.
  */
-/*ARGSUSED*/
 void
 xfs_iflush_done(
-	xfs_buf_t		*bp,
-	xfs_inode_log_item_t	*iip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
 	xfs_inode_t		*ip = iip->ili_inode;
-	struct xfs_ail		*ailp = iip->ili_item.li_ailp;
+	struct xfs_ail		*ailp = lip->li_ailp;
 
 	/*
 	 * We only want to pull the item from the AIL if it is
@@ -917,12 +851,11 @@ xfs_iflush_done(
 	 * the lock since it's cheaper, and then we recheck while
 	 * holding the lock before removing the inode from the AIL.
 	 */
-	if (iip->ili_logged &&
-	    (iip->ili_item.li_lsn == iip->ili_flush_lsn)) {
+	if (iip->ili_logged && lip->li_lsn == iip->ili_flush_lsn) {
 		spin_lock(&ailp->xa_lock);
-		if (iip->ili_item.li_lsn == iip->ili_flush_lsn) {
+		if (lip->li_lsn == iip->ili_flush_lsn) {
 			/* xfs_trans_ail_delete() drops the AIL lock. */
-			xfs_trans_ail_delete(ailp, (xfs_log_item_t*)iip);
+			xfs_trans_ail_delete(ailp, lip);
 		} else {
 			spin_unlock(&ailp->xa_lock);
 		}
@@ -940,8 +873,6 @@ xfs_iflush_done(
 	 * Release the inode's flush lock since we're done with it.
 	 */
 	xfs_ifunlock(ip);
-
-	return;
 }
 
 /*
@@ -957,10 +888,8 @@ xfs_iflush_abort(
 	xfs_inode_t		*ip)
 {
 	xfs_inode_log_item_t	*iip = ip->i_itemp;
-	xfs_mount_t		*mp;
 
 	iip = ip->i_itemp;
-	mp = ip->i_mount;
 	if (iip) {
 		struct xfs_ail	*ailp = iip->ili_item.li_ailp;
 		if (iip->ili_item.li_flags & XFS_LI_IN_AIL) {
@@ -991,10 +920,10 @@ xfs_iflush_abort(
 
 void
 xfs_istale_done(
-	xfs_buf_t		*bp,
-	xfs_inode_log_item_t	*iip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
-	xfs_iflush_abort(iip->ili_inode);
+	xfs_iflush_abort(INODE_ITEM(lip)->ili_inode);
 }
 
 /*
@@ -1007,9 +936,8 @@ xfs_inode_item_format_convert(
 	xfs_inode_log_format_t	*in_f)
 {
 	if (buf->i_len == sizeof(xfs_inode_log_format_32_t)) {
-		xfs_inode_log_format_32_t *in_f32;
+		xfs_inode_log_format_32_t *in_f32 = buf->i_addr;
 
-		in_f32 = (xfs_inode_log_format_32_t *)buf->i_addr;
 		in_f->ilf_type = in_f32->ilf_type;
 		in_f->ilf_size = in_f32->ilf_size;
 		in_f->ilf_fields = in_f32->ilf_fields;
@@ -1025,9 +953,8 @@ xfs_inode_item_format_convert(
 		in_f->ilf_boffset = in_f32->ilf_boffset;
 		return 0;
 	} else if (buf->i_len == sizeof(xfs_inode_log_format_64_t)){
-		xfs_inode_log_format_64_t *in_f64;
+		xfs_inode_log_format_64_t *in_f64 = buf->i_addr;
 
-		in_f64 = (xfs_inode_log_format_64_t *)buf->i_addr;
 		in_f->ilf_type = in_f64->ilf_type;
 		in_f->ilf_size = in_f64->ilf_size;
 		in_f->ilf_fields = in_f64->ilf_fields;
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index 9a467958ecd..d3dee61e6d9 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -103,12 +103,6 @@ typedef struct xfs_inode_log_format_64 {
 				 XFS_ILOG_ADATA | XFS_ILOG_AEXT | \
 				 XFS_ILOG_ABROOT)
 
-#define	XFS_ILI_HOLD		0x1
-#define	XFS_ILI_IOLOCKED_EXCL	0x2
-#define	XFS_ILI_IOLOCKED_SHARED	0x4
-
-#define	XFS_ILI_IOLOCKED_ANY   (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
-
 static inline int xfs_ilog_fbroot(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
@@ -137,7 +131,7 @@ typedef struct xfs_inode_log_item {
 	struct xfs_inode	*ili_inode;	   /* inode ptr */
 	xfs_lsn_t		ili_flush_lsn;	   /* lsn at last flush */
 	xfs_lsn_t		ili_last_lsn;	   /* lsn at last transaction */
-	unsigned short		ili_flags;	   /* misc flags */
+	unsigned short		ili_lock_flags;	   /* lock flags */
 	unsigned short		ili_logged;	   /* flushed logged data */
 	unsigned int		ili_last_fields;   /* fields when flushed */
 	struct xfs_bmbt_rec	*ili_extents_buf;  /* array of logged
@@ -161,8 +155,8 @@ static inline int xfs_inode_clean(xfs_inode_t *ip)
 
 extern void xfs_inode_item_init(struct xfs_inode *, struct xfs_mount *);
 extern void xfs_inode_item_destroy(struct xfs_inode *);
-extern void xfs_iflush_done(struct xfs_buf *, xfs_inode_log_item_t *);
-extern void xfs_istale_done(struct xfs_buf *, xfs_inode_log_item_t *);
+extern void xfs_iflush_done(struct xfs_buf *, struct xfs_log_item *);
+extern void xfs_istale_done(struct xfs_buf *, struct xfs_log_item *);
 extern void xfs_iflush_abort(struct xfs_inode *);
 extern int xfs_inode_item_format_convert(xfs_log_iovec_t *,
 					 xfs_inode_log_format_t *);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index ef14943829d..20576146369 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -23,19 +23,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
@@ -123,7 +118,7 @@ xfs_iomap(
 	error = xfs_bmapi(NULL, ip, offset_fsb,
 			(xfs_filblks_t)(end_fsb - offset_fsb),
 			bmapi_flags,  NULL, 0, imap,
-			nimaps, NULL, NULL);
+			nimaps, NULL);
 
 	if (error)
 		goto out;
@@ -138,7 +133,7 @@ xfs_iomap(
 			break;
 		}
 
-		if (flags & (BMAPI_DIRECT|BMAPI_MMAP)) {
+		if (flags & BMAPI_DIRECT) {
 			error = xfs_iomap_write_direct(ip, offset, count, flags,
 						       imap, nimaps);
 		} else {
@@ -247,7 +242,7 @@ xfs_iomap_write_direct(
 	xfs_off_t	offset,
 	size_t		count,
 	int		flags,
-	xfs_bmbt_irec_t *ret_imap,
+	xfs_bmbt_irec_t *imap,
 	int		*nmaps)
 {
 	xfs_mount_t	*mp = ip->i_mount;
@@ -261,7 +256,6 @@ xfs_iomap_write_direct(
 	int		quota_flag;
 	int		rt;
 	xfs_trans_t	*tp;
-	xfs_bmbt_irec_t imap;
 	xfs_bmap_free_t free_list;
 	uint		qblocks, resblks, resrtextents;
 	int		committed;
@@ -285,10 +279,10 @@ xfs_iomap_write_direct(
 		if (error)
 			goto error_out;
 	} else {
-		if (*nmaps && (ret_imap->br_startblock == HOLESTARTBLOCK))
+		if (*nmaps && (imap->br_startblock == HOLESTARTBLOCK))
 			last_fsb = MIN(last_fsb, (xfs_fileoff_t)
-					ret_imap->br_blockcount +
-					ret_imap->br_startoff);
+					imap->br_blockcount +
+					imap->br_startoff);
 	}
 	count_fsb = last_fsb - offset_fsb;
 	ASSERT(count_fsb > 0);
@@ -334,20 +328,22 @@ xfs_iomap_write_direct(
 	if (error)
 		goto error1;
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	bmapi_flag = XFS_BMAPI_WRITE;
 	if ((flags & BMAPI_DIRECT) && (offset < ip->i_size || extsz))
 		bmapi_flag |= XFS_BMAPI_PREALLOC;
 
 	/*
-	 * Issue the xfs_bmapi() call to allocate the blocks
+	 * Issue the xfs_bmapi() call to allocate the blocks.
+	 *
+	 * From this point onwards we overwrite the imap pointer that the
+	 * caller gave to us.
 	 */
 	xfs_bmap_init(&free_list, &firstfsb);
 	nimaps = 1;
 	error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
-		&firstfsb, 0, &imap, &nimaps, &free_list, NULL);
+		&firstfsb, 0, imap, &nimaps, &free_list);
 	if (error)
 		goto error0;
 
@@ -369,12 +365,11 @@ xfs_iomap_write_direct(
 		goto error_out;
 	}
 
-	if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip))) {
-		error = xfs_cmn_err_fsblock_zero(ip, &imap);
+	if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip))) {
+		error = xfs_cmn_err_fsblock_zero(ip, imap);
 		goto error_out;
 	}
 
-	*ret_imap = imap;
 	*nmaps = 1;
 	return 0;
 
@@ -425,7 +420,7 @@ xfs_iomap_eof_want_preallocate(
 		imaps = nimaps;
 		firstblock = NULLFSBLOCK;
 		error = xfs_bmapi(NULL, ip, start_fsb, count_fsb, 0,
-				  &firstblock, 0, imap, &imaps, NULL, NULL);
+				  &firstblock, 0, imap, &imaps, NULL);
 		if (error)
 			return error;
 		for (n = 0; n < imaps; n++) {
@@ -500,7 +495,7 @@ retry:
 			  (xfs_filblks_t)(last_fsb - offset_fsb),
 			  XFS_BMAPI_DELAY | XFS_BMAPI_WRITE |
 			  XFS_BMAPI_ENTIRE, &firstblock, 1, imap,
-			  &nimaps, NULL, NULL);
+			  &nimaps, NULL);
 	if (error && (error != ENOSPC))
 		return XFS_ERROR(error);
 
@@ -548,7 +543,7 @@ xfs_iomap_write_allocate(
 	xfs_inode_t	*ip,
 	xfs_off_t	offset,
 	size_t		count,
-	xfs_bmbt_irec_t *map,
+	xfs_bmbt_irec_t *imap,
 	int		*retmap)
 {
 	xfs_mount_t	*mp = ip->i_mount;
@@ -557,7 +552,6 @@ xfs_iomap_write_allocate(
 	xfs_fsblock_t	first_block;
 	xfs_bmap_free_t	free_list;
 	xfs_filblks_t	count_fsb;
-	xfs_bmbt_irec_t	imap;
 	xfs_trans_t	*tp;
 	int		nimaps, committed;
 	int		error = 0;
@@ -573,8 +567,8 @@ xfs_iomap_write_allocate(
 		return XFS_ERROR(error);
 
 	offset_fsb = XFS_B_TO_FSBT(mp, offset);
-	count_fsb = map->br_blockcount;
-	map_start_fsb = map->br_startoff;
+	count_fsb = imap->br_blockcount;
+	map_start_fsb = imap->br_startoff;
 
 	XFS_STATS_ADD(xs_xstrat_bytes, XFS_FSB_TO_B(mp, count_fsb));
 
@@ -602,8 +596,7 @@ xfs_iomap_write_allocate(
 				return XFS_ERROR(error);
 			}
 			xfs_ilock(ip, XFS_ILOCK_EXCL);
-			xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(tp, ip);
+			xfs_trans_ijoin(tp, ip);
 
 			xfs_bmap_init(&free_list, &first_block);
 
@@ -654,10 +647,15 @@ xfs_iomap_write_allocate(
 				}
 			}
 
-			/* Go get the actual blocks */
+			/*
+			 * Go get the actual blocks.
+	 	 	 *
+			 * From this point onwards we overwrite the imap
+			 * pointer that the caller gave to us.
+			 */
 			error = xfs_bmapi(tp, ip, map_start_fsb, count_fsb,
 					XFS_BMAPI_WRITE, &first_block, 1,
-					&imap, &nimaps, &free_list, NULL);
+					imap, &nimaps, &free_list);
 			if (error)
 				goto trans_cancel;
 
@@ -676,13 +674,12 @@ xfs_iomap_write_allocate(
 		 * See if we were able to allocate an extent that
 		 * covers at least part of the callers request
 		 */
-		if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip)))
-			return xfs_cmn_err_fsblock_zero(ip, &imap);
+		if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
+			return xfs_cmn_err_fsblock_zero(ip, imap);
 
-		if ((offset_fsb >= imap.br_startoff) &&
-		    (offset_fsb < (imap.br_startoff +
-				   imap.br_blockcount))) {
-			*map = imap;
+		if ((offset_fsb >= imap->br_startoff) &&
+		    (offset_fsb < (imap->br_startoff +
+				   imap->br_blockcount))) {
 			*retmap = 1;
 			XFS_STATS_INC(xs_xstrat_quick);
 			return 0;
@@ -692,8 +689,8 @@ xfs_iomap_write_allocate(
 		 * So far we have not mapped the requested part of the
 		 * file, just surrounding data, try again.
 		 */
-		count_fsb -= imap.br_blockcount;
-		map_start_fsb = imap.br_startoff + imap.br_blockcount;
+		count_fsb -= imap->br_blockcount;
+		map_start_fsb = imap->br_startoff + imap->br_blockcount;
 	}
 
 trans_cancel:
@@ -766,8 +763,7 @@ xfs_iomap_write_unwritten(
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Modify the unwritten extent state of the buffer.
@@ -776,7 +772,7 @@ xfs_iomap_write_unwritten(
 		nimaps = 1;
 		error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
 				  XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
-				  1, &imap, &nimaps, &free_list, NULL);
+				  1, &imap, &nimaps, &free_list);
 		if (error)
 			goto error_on_bmapi_transaction;
 
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index 81ac4afd45b..7748a430f50 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -18,17 +18,16 @@
 #ifndef __XFS_IOMAP_H__
 #define __XFS_IOMAP_H__
 
-typedef enum {
-	/* base extent manipulation calls */
-	BMAPI_READ = (1 << 0),		/* read extents */
-	BMAPI_WRITE = (1 << 1),		/* create extents */
-	BMAPI_ALLOCATE = (1 << 2),	/* delayed allocate to real extents */
-	/* modifiers */
-	BMAPI_IGNSTATE = (1 << 4),	/* ignore unwritten state on read */
-	BMAPI_DIRECT = (1 << 5),	/* direct instead of buffered write */
-	BMAPI_MMAP = (1 << 6),		/* allocate for mmap write */
-	BMAPI_TRYLOCK = (1 << 7),	/* non-blocking request */
-} bmapi_flags_t;
+/* base extent manipulation calls */
+#define BMAPI_READ	(1 << 0)	/* read extents */
+#define BMAPI_WRITE	(1 << 1)	/* create extents */
+#define BMAPI_ALLOCATE	(1 << 2)	/* delayed allocate to real extents */
+
+/* modifiers */
+#define BMAPI_IGNSTATE	(1 << 4)	/* ignore unwritten state on read */
+#define BMAPI_DIRECT	(1 << 5)	/* direct instead of buffered write */
+#define BMAPI_MMA	(1 << 6)	/* allocate for mmap write */
+#define BMAPI_TRYLOCK	(1 << 7)	/* non-blocking request */
 
 #define BMAPI_FLAGS \
 	{ BMAPI_READ,		"READ" }, \
@@ -36,7 +35,6 @@ typedef enum {
 	{ BMAPI_ALLOCATE,	"ALLOCATE" }, \
 	{ BMAPI_IGNSTATE,	"IGNSTATE" }, \
 	{ BMAPI_DIRECT,		"DIRECT" }, \
-	{ BMAPI_MMAP,		"MMAP" }, \
 	{ BMAPI_TRYLOCK,	"TRYLOCK" }
 
 struct xfs_inode;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index b1b801e4a28..7e3626e5925 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -24,20 +24,17 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_error.h"
 #include "xfs_btree.h"
+#include "xfs_trace.h"
 
 STATIC int
 xfs_internal_inum(
@@ -49,24 +46,40 @@ xfs_internal_inum(
 		 (ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
 }
 
-STATIC int
-xfs_bulkstat_one_iget(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
-	xfs_bstat_t	*buf,		/* return buffer */
-	int		*stat)		/* BULKSTAT_RV_... */
+/*
+ * Return stat information for one inode.
+ * Return 0 if ok, else errno.
+ */
+int
+xfs_bulkstat_one_int(
+	struct xfs_mount	*mp,		/* mount point for filesystem */
+	xfs_ino_t		ino,		/* inode to get data for */
+	void __user		*buffer,	/* buffer to place output in */
+	int			ubsize,		/* size of buffer */
+	bulkstat_one_fmt_pf	formatter,	/* formatter, copy to user */
+	int			*ubused,	/* bytes used by me */
+	int			*stat)		/* BULKSTAT_RV_... */
 {
-	xfs_icdinode_t	*dic;	/* dinode core info pointer */
-	xfs_inode_t	*ip;		/* incore inode pointer */
-	struct inode	*inode;
-	int		error;
+	struct xfs_icdinode	*dic;		/* dinode core info pointer */
+	struct xfs_inode	*ip;		/* incore inode pointer */
+	struct inode		*inode;
+	struct xfs_bstat	*buf;		/* return buffer */
+	int			error = 0;	/* error value */
+
+	*stat = BULKSTAT_RV_NOTHING;
+
+	if (!buffer || xfs_internal_inum(mp, ino))
+		return XFS_ERROR(EINVAL);
+
+	buf = kmem_alloc(sizeof(*buf), KM_SLEEP | KM_MAYFAIL);
+	if (!buf)
+		return XFS_ERROR(ENOMEM);
 
 	error = xfs_iget(mp, NULL, ino,
-			 XFS_IGET_BULKSTAT, XFS_ILOCK_SHARED, &ip, bno);
+			 XFS_IGET_UNTRUSTED, XFS_ILOCK_SHARED, &ip);
 	if (error) {
 		*stat = BULKSTAT_RV_NOTHING;
-		return error;
+		goto out_free;
 	}
 
 	ASSERT(ip != NULL);
@@ -127,77 +140,17 @@ xfs_bulkstat_one_iget(
 		buf->bs_blocks = dic->di_nblocks + ip->i_delayed_blks;
 		break;
 	}
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	IRELE(ip);
 
-	xfs_iput(ip, XFS_ILOCK_SHARED);
-	return error;
-}
-
-STATIC void
-xfs_bulkstat_one_dinode(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	xfs_dinode_t	*dic,		/* dinode inode pointer */
-	xfs_bstat_t	*buf)		/* return buffer */
-{
-	/*
-	 * The inode format changed when we moved the link count and
-	 * made it 32 bits long.  If this is an old format inode,
-	 * convert it in memory to look like a new one.  If it gets
-	 * flushed to disk we will convert back before flushing or
-	 * logging it.  We zero out the new projid field and the old link
-	 * count field.  We'll handle clearing the pad field (the remains
-	 * of the old uuid field) when we actually convert the inode to
-	 * the new format. We don't change the version number so that we
-	 * can distinguish this from a real new format inode.
-	 */
-	if (dic->di_version == 1) {
-		buf->bs_nlink = be16_to_cpu(dic->di_onlink);
-		buf->bs_projid = 0;
-	} else {
-		buf->bs_nlink = be32_to_cpu(dic->di_nlink);
-		buf->bs_projid = be16_to_cpu(dic->di_projid);
-	}
+	error = formatter(buffer, ubsize, ubused, buf);
 
-	buf->bs_ino = ino;
-	buf->bs_mode = be16_to_cpu(dic->di_mode);
-	buf->bs_uid = be32_to_cpu(dic->di_uid);
-	buf->bs_gid = be32_to_cpu(dic->di_gid);
-	buf->bs_size = be64_to_cpu(dic->di_size);
-	buf->bs_atime.tv_sec = be32_to_cpu(dic->di_atime.t_sec);
-	buf->bs_atime.tv_nsec = be32_to_cpu(dic->di_atime.t_nsec);
-	buf->bs_mtime.tv_sec = be32_to_cpu(dic->di_mtime.t_sec);
-	buf->bs_mtime.tv_nsec = be32_to_cpu(dic->di_mtime.t_nsec);
-	buf->bs_ctime.tv_sec = be32_to_cpu(dic->di_ctime.t_sec);
-	buf->bs_ctime.tv_nsec = be32_to_cpu(dic->di_ctime.t_nsec);
-	buf->bs_xflags = xfs_dic2xflags(dic);
-	buf->bs_extsize = be32_to_cpu(dic->di_extsize) << mp->m_sb.sb_blocklog;
-	buf->bs_extents = be32_to_cpu(dic->di_nextents);
-	buf->bs_gen = be32_to_cpu(dic->di_gen);
-	memset(buf->bs_pad, 0, sizeof(buf->bs_pad));
-	buf->bs_dmevmask = be32_to_cpu(dic->di_dmevmask);
-	buf->bs_dmstate = be16_to_cpu(dic->di_dmstate);
-	buf->bs_aextents = be16_to_cpu(dic->di_anextents);
-	buf->bs_forkoff = XFS_DFORK_BOFF(dic);
+	if (!error)
+		*stat = BULKSTAT_RV_DIDONE;
 
-	switch (dic->di_format) {
-	case XFS_DINODE_FMT_DEV:
-		buf->bs_rdev = xfs_dinode_get_rdev(dic);
-		buf->bs_blksize = BLKDEV_IOSIZE;
-		buf->bs_blocks = 0;
-		break;
-	case XFS_DINODE_FMT_LOCAL:
-	case XFS_DINODE_FMT_UUID:
-		buf->bs_rdev = 0;
-		buf->bs_blksize = mp->m_sb.sb_blocksize;
-		buf->bs_blocks = 0;
-		break;
-	case XFS_DINODE_FMT_EXTENTS:
-	case XFS_DINODE_FMT_BTREE:
-		buf->bs_rdev = 0;
-		buf->bs_blksize = mp->m_sb.sb_blocksize;
-		buf->bs_blocks = be64_to_cpu(dic->di_nblocks);
-		break;
-	}
+ out_free:
+	kmem_free(buf);
+	return error;
 }
 
 /* Return 0 on success or positive error */
@@ -217,118 +170,17 @@ xfs_bulkstat_one_fmt(
 	return 0;
 }
 
-/*
- * Return stat information for one inode.
- * Return 0 if ok, else errno.
- */
-int		   	    		/* error status */
-xfs_bulkstat_one_int(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	void		__user *buffer,	/* buffer to place output in */
-	int		ubsize,		/* size of buffer */
-	bulkstat_one_fmt_pf formatter,	/* formatter, copy to user */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
-	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
-	int		*stat)		/* BULKSTAT_RV_... */
-{
-	xfs_bstat_t	*buf;		/* return buffer */
-	int		error = 0;	/* error value */
-	xfs_dinode_t	*dip;		/* dinode inode pointer */
-
-	dip = (xfs_dinode_t *)dibuff;
-	*stat = BULKSTAT_RV_NOTHING;
-
-	if (!buffer || xfs_internal_inum(mp, ino))
-		return XFS_ERROR(EINVAL);
-
-	buf = kmem_alloc(sizeof(*buf), KM_SLEEP);
-
-	if (dip == NULL) {
-		/* We're not being passed a pointer to a dinode.  This happens
-		 * if BULKSTAT_FG_IGET is selected.  Do the iget.
-		 */
-		error = xfs_bulkstat_one_iget(mp, ino, bno, buf, stat);
-		if (error)
-			goto out_free;
-	} else {
-		xfs_bulkstat_one_dinode(mp, ino, dip, buf);
-	}
-
-	error = formatter(buffer, ubsize, ubused, buf);
-	if (error)
-		goto out_free;
-
-	*stat = BULKSTAT_RV_DIDONE;
-
- out_free:
-	kmem_free(buf);
-	return error;
-}
-
 int
 xfs_bulkstat_one(
 	xfs_mount_t	*mp,		/* mount point for filesystem */
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* buffer to place output in */
 	int		ubsize,		/* size of buffer */
-	void		*private_data,	/* my private data */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
 	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
 	int		*stat)		/* BULKSTAT_RV_... */
 {
 	return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
-				    xfs_bulkstat_one_fmt, bno,
-				    ubused, dibuff, stat);
-}
-
-/*
- * Test to see whether we can use the ondisk inode directly, based
- * on the given bulkstat flags, filling in dipp accordingly.
- * Returns zero if the inode is dodgey.
- */
-STATIC int
-xfs_bulkstat_use_dinode(
-	xfs_mount_t	*mp,
-	int		flags,
-	xfs_buf_t	*bp,
-	int		clustidx,
-	xfs_dinode_t	**dipp)
-{
-	xfs_dinode_t	*dip;
-	unsigned int	aformat;
-
-	*dipp = NULL;
-	if (!bp || (flags & BULKSTAT_FG_IGET))
-		return 1;
-	dip = (xfs_dinode_t *)
-			xfs_buf_offset(bp, clustidx << mp->m_sb.sb_inodelog);
-	/*
-	 * Check the buffer containing the on-disk inode for di_mode == 0.
-	 * This is to prevent xfs_bulkstat from picking up just reclaimed
-	 * inodes that have their in-core state initialized but not flushed
-	 * to disk yet. This is a temporary hack that would require a proper
-	 * fix in the future.
-	 */
-	if (be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC ||
-	    !XFS_DINODE_GOOD_VERSION(dip->di_version) ||
-	    !dip->di_mode)
-		return 0;
-	if (flags & BULKSTAT_FG_QUICK) {
-		*dipp = dip;
-		return 1;
-	}
-	/* BULKSTAT_FG_INLINE: if attr fork is local, or not there, use it */
-	aformat = dip->di_aformat;
-	if ((XFS_DFORK_Q(dip) == 0) ||
-	    (aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (aformat == XFS_DINODE_FMT_EXTENTS && !dip->di_anextents)) {
-		*dipp = dip;
-		return 1;
-	}
-	return 1;
+				    xfs_bulkstat_one_fmt, ubused, stat);
 }
 
 #define XFS_BULKSTAT_UBLEFT(ubleft)	((ubleft) >= statstruct_size)
@@ -342,10 +194,8 @@ xfs_bulkstat(
 	xfs_ino_t		*lastinop, /* last inode returned */
 	int			*ubcountp, /* size of buffer/count returned */
 	bulkstat_one_pf		formatter, /* func that'd fill a single buf */
-	void			*private_data,/* private data for formatter */
 	size_t			statstruct_size, /* sizeof struct filling */
 	char			__user *ubuffer, /* buffer with inode stats */
-	int			flags,	/* defined in xfs_itable.h */
 	int			*done)	/* 1 if there are more stats to get */
 {
 	xfs_agblock_t		agbno=0;/* allocation group block number */
@@ -380,14 +230,12 @@ xfs_bulkstat(
 	int			ubelem;	/* spaces used in user's buffer */
 	int			ubused;	/* bytes used by formatter */
 	xfs_buf_t		*bp;	/* ptr to on-disk inode cluster buf */
-	xfs_dinode_t		*dip;	/* ptr into bp for specific inode */
 
 	/*
 	 * Get the last inode value, see if there's nothing to do.
 	 */
 	ino = (xfs_ino_t)*lastinop;
 	lastino = ino;
-	dip = NULL;
 	agno = XFS_INO_TO_AGNO(mp, ino);
 	agino = XFS_INO_TO_AGINO(mp, ino);
 	if (agno >= mp->m_sb.sb_agcount ||
@@ -612,37 +460,6 @@ xfs_bulkstat(
 							irbp->ir_startino) +
 						((chunkidx & nimask) >>
 						 mp->m_sb.sb_inopblog);
-
-					if (flags & (BULKSTAT_FG_QUICK |
-						     BULKSTAT_FG_INLINE)) {
-						int offset;
-
-						ino = XFS_AGINO_TO_INO(mp, agno,
-								       agino);
-						bno = XFS_AGB_TO_DADDR(mp, agno,
-								       agbno);
-
-						/*
-						 * Get the inode cluster buffer
-						 */
-						if (bp)
-							xfs_buf_relse(bp);
-
-						error = xfs_inotobp(mp, NULL, ino, &dip,
-								    &bp, &offset,
-								    XFS_IGET_BULKSTAT);
-
-						if (!error)
-							clustidx = offset / mp->m_sb.sb_inodesize;
-						if (XFS_TEST_ERROR(error != 0,
-								   mp, XFS_ERRTAG_BULKSTAT_READ_CHUNK,
-								   XFS_RANDOM_BULKSTAT_READ_CHUNK)) {
-							bp = NULL;
-							ubleft = 0;
-							rval = error;
-							break;
-						}
-					}
 				}
 				ino = XFS_AGINO_TO_INO(mp, agno, agino);
 				bno = XFS_AGB_TO_DADDR(mp, agno, agbno);
@@ -658,35 +475,13 @@ xfs_bulkstat(
 				 * when the chunk is used up.
 				 */
 				irbp->ir_freecount++;
-				if (!xfs_bulkstat_use_dinode(mp, flags, bp,
-							     clustidx, &dip)) {
-					lastino = ino;
-					continue;
-				}
-				/*
-				 * If we need to do an iget, cannot hold bp.
-				 * Drop it, until starting the next cluster.
-				 */
-				if ((flags & BULKSTAT_FG_INLINE) && !dip) {
-					if (bp)
-						xfs_buf_relse(bp);
-					bp = NULL;
-				}
 
 				/*
 				 * Get the inode and fill in a single buffer.
-				 * BULKSTAT_FG_QUICK uses dip to fill it in.
-				 * BULKSTAT_FG_IGET uses igets.
-				 * BULKSTAT_FG_INLINE uses dip if we have an
-				 * inline attr fork, else igets.
-				 * See: xfs_bulkstat_one & xfs_dm_bulkstat_one.
-				 * This is also used to count inodes/blks, etc
-				 * in xfs_qm_quotacheck.
 				 */
 				ubused = statstruct_size;
-				error = formatter(mp, ino, ubufp,
-						ubleft, private_data,
-						bno, &ubused, dip, &fmterror);
+				error = formatter(mp, ino, ubufp, ubleft,
+						  &ubused, &fmterror);
 				if (fmterror == BULKSTAT_RV_NOTHING) {
 					if (error && error != ENOENT &&
 						error != EINVAL) {
@@ -778,8 +573,7 @@ xfs_bulkstat_single(
 	 */
 
 	ino = (xfs_ino_t)*lastinop;
-	error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t),
-				 NULL, 0, NULL, NULL, &res);
+	error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t), 0, &res);
 	if (error) {
 		/*
 		 * Special case way failed, do it the "long" way
@@ -788,8 +582,7 @@ xfs_bulkstat_single(
 		(*lastinop)--;
 		count = 1;
 		if (xfs_bulkstat(mp, lastinop, &count, xfs_bulkstat_one,
-				NULL, sizeof(xfs_bstat_t), buffer,
-				BULKSTAT_FG_IGET, done))
+				sizeof(xfs_bstat_t), buffer, done))
 			return error;
 		if (count == 0 || (xfs_ino_t)*lastinop != ino)
 			return error == EFSCORRUPTED ?
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index 20792bf4594..97295d91d17 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -27,10 +27,7 @@ typedef int (*bulkstat_one_pf)(struct xfs_mount	*mp,
 			       xfs_ino_t	ino,
 			       void		__user *buffer,
 			       int		ubsize,
-			       void		*private_data,
-			       xfs_daddr_t	bno,
 			       int		*ubused,
-			       void		*dip,
 			       int		*stat);
 
 /*
@@ -41,13 +38,6 @@ typedef int (*bulkstat_one_pf)(struct xfs_mount	*mp,
 #define BULKSTAT_RV_GIVEUP	2
 
 /*
- * Values for bulkstat flag argument.
- */
-#define BULKSTAT_FG_IGET	0x1	/* Go through the buffer cache */
-#define BULKSTAT_FG_QUICK	0x2	/* No iget, walk the dinode cluster */
-#define BULKSTAT_FG_INLINE	0x4	/* No iget if inline attrs */
-
-/*
  * Return stat information in bulk (by-inode) for the filesystem.
  */
 int					/* error status */
@@ -56,10 +46,8 @@ xfs_bulkstat(
 	xfs_ino_t	*lastino,	/* last inode returned */
 	int		*count,		/* size of buffer/count returned */
 	bulkstat_one_pf formatter,	/* func that'd fill a single buf */
-	void		*private_data,	/* private data for formatter */
 	size_t		statstruct_size,/* sizeof struct that we're filling */
 	char		__user *ubuffer,/* buffer with inode stats */
-	int		flags,		/* flag to control access method */
 	int		*done);		/* 1 if there are more stats to get */
 
 int
@@ -82,9 +70,7 @@ xfs_bulkstat_one_int(
 	void			__user *buffer,
 	int			ubsize,
 	bulkstat_one_fmt_pf	formatter,
-	xfs_daddr_t		bno,
 	int			*ubused,
-	void			*dibuff,
 	int			*stat);
 
 int
@@ -93,10 +79,7 @@ xfs_bulkstat_one(
 	xfs_ino_t		ino,
 	void			__user *buffer,
 	int			ubsize,
-	void			*private_data,
-	xfs_daddr_t		bno,
 	int			*ubused,
-	void			*dibuff,
 	int			*stat);
 
 typedef int (*inumbers_fmt_pf)(
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 5215abc8023..925d572bf0f 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -24,8 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_log_priv.h"
@@ -35,8 +33,6 @@
 #include "xfs_ialloc_btree.h"
 #include "xfs_log_recover.h"
 #include "xfs_trans_priv.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_rw.h"
@@ -337,7 +333,6 @@ xfs_log_reserve(
 	int			retval = 0;
 
 	ASSERT(client == XFS_TRANSACTION || client == XFS_LOG);
-	ASSERT((flags & XFS_LOG_NOSLEEP) == 0);
 
 	if (XLOG_FORCED_SHUTDOWN(log))
 		return XFS_ERROR(EIO);
@@ -552,7 +547,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 				.magic = XLOG_UNMOUNT_TYPE,
 			};
 			struct xfs_log_iovec reg = {
-				.i_addr = (void *)&magic,
+				.i_addr = &magic,
 				.i_len = sizeof(magic),
 				.i_type = XLOG_REG_TYPE_UNMOUNT,
 			};
@@ -1047,7 +1042,6 @@ xlog_alloc_log(xfs_mount_t	*mp,
 	xlog_in_core_t		*iclog, *prev_iclog=NULL;
 	xfs_buf_t		*bp;
 	int			i;
-	int			iclogsize;
 	int			error = ENOMEM;
 	uint			log2_size = 0;
 
@@ -1127,7 +1121,6 @@ xlog_alloc_log(xfs_mount_t	*mp,
 	 * with different amounts of memory.  See the definition of
 	 * xlog_in_core_t in xfs_log_priv.h for details.
 	 */
-	iclogsize = log->l_iclog_size;
 	ASSERT(log->l_iclog_size >= 4096);
 	for (i=0; i < log->l_iclog_bufs; i++) {
 		*iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL);
@@ -1428,11 +1421,8 @@ xlog_sync(xlog_t		*log,
 	XFS_BUF_BUSY(bp);
 	XFS_BUF_ASYNC(bp);
 	bp->b_flags |= XBF_LOG_BUFFER;
-	/*
-	 * Do an ordered write for the log block.
-	 * Its unnecessary to flush the first split block in the log wrap case.
-	 */
-	if (!split && (log->l_mp->m_flags & XFS_MOUNT_BARRIER))
+
+	if (log->l_mp->m_flags & XFS_MOUNT_BARRIER)
 		XFS_BUF_ORDERED(bp);
 
 	ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 04c78e642cc..916eb7db14d 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -55,14 +55,10 @@ static inline xfs_lsn_t	_lsn_cmp(xfs_lsn_t lsn1, xfs_lsn_t lsn2)
 /*
  * Flags to xfs_log_reserve()
  *
- *	XFS_LOG_SLEEP:	 If space is not available, sleep (default)
- *	XFS_LOG_NOSLEEP: If space is not available, return error
  *	XFS_LOG_PERM_RESERV: Permanent reservation.  When writes are
  *		performed against this type of reservation, the reservation
  *		is not decreased.  Long running transactions should use this.
  */
-#define XFS_LOG_SLEEP		0x0
-#define XFS_LOG_NOSLEEP		0x1
 #define XFS_LOG_PERM_RESERV	0x2
 
 /*
@@ -104,7 +100,7 @@ static inline xfs_lsn_t	_lsn_cmp(xfs_lsn_t lsn1, xfs_lsn_t lsn2)
 #define XLOG_REG_TYPE_MAX		19
 
 typedef struct xfs_log_iovec {
-	xfs_caddr_t	i_addr;		/* beginning address of region */
+	void		*i_addr;	/* beginning address of region */
 	int		i_len;		/* length in bytes of region */
 	uint		i_type;		/* type of region */
 } xfs_log_iovec_t;
@@ -201,9 +197,4 @@ int	xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp,
 bool	xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);
 
 #endif
-
-
-extern int xlog_debug;		/* set to 1 to enable real log */
-
-
 #endif	/* __XFS_LOG_H__ */
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index bb17cc044bf..31e4ea2d19a 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -26,8 +26,6 @@
 #include "xfs_log_priv.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_alloc.h"
@@ -554,7 +552,7 @@ xlog_cil_push(
 	thdr.th_type = XFS_TRANS_CHECKPOINT;
 	thdr.th_tid = tic->t_tid;
 	thdr.th_num_items = num_iovecs;
-	lhdr.i_addr = (xfs_caddr_t)&thdr;
+	lhdr.i_addr = &thdr;
 	lhdr.i_len = sizeof(xfs_trans_header_t);
 	lhdr.i_type = XLOG_REG_TYPE_TRANSHDR;
 	tic->t_curr_res -= lhdr.i_len + sizeof(xlog_op_header_t);
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 14a69aec2c0..6f3f5fa37ac 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -24,15 +24,11 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -132,15 +128,10 @@ xlog_align(
 	int		nbblks,
 	xfs_buf_t	*bp)
 {
-	xfs_daddr_t	offset;
-	xfs_caddr_t	ptr;
+	xfs_daddr_t	offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1);
 
-	offset = blk_no & ((xfs_daddr_t) log->l_sectBBsize - 1);
-	ptr = XFS_BUF_PTR(bp) + BBTOB(offset);
-
-	ASSERT(ptr + BBTOB(nbblks) <= XFS_BUF_PTR(bp) + XFS_BUF_SIZE(bp));
-
-	return ptr;
+	ASSERT(BBTOB(offset + nbblks) <= XFS_BUF_SIZE(bp));
+	return XFS_BUF_PTR(bp) + BBTOB(offset);
 }
 
 
@@ -1570,9 +1561,7 @@ xlog_recover_reorder_trans(
 
 	list_splice_init(&trans->r_itemq, &sort_list);
 	list_for_each_entry_safe(item, n, &sort_list, ri_list) {
-		xfs_buf_log_format_t	*buf_f;
-
-		buf_f = (xfs_buf_log_format_t *)item->ri_buf[0].i_addr;
+		xfs_buf_log_format_t	*buf_f = item->ri_buf[0].i_addr;
 
 		switch (ITEM_TYPE(item)) {
 		case XFS_LI_BUF:
@@ -1897,9 +1886,8 @@ xlog_recover_do_inode_buffer(
 		 * current di_next_unlinked field.  Extract its value
 		 * and copy it to the buffer copy.
 		 */
-		logged_nextp = (xfs_agino_t *)
-			       ((char *)(item->ri_buf[item_index].i_addr) +
-				(next_unlinked_offset - reg_buf_offset));
+		logged_nextp = item->ri_buf[item_index].i_addr +
+				next_unlinked_offset - reg_buf_offset;
 		if (unlikely(*logged_nextp == 0)) {
 			xfs_fs_cmn_err(CE_ALERT, mp,
 				"bad inode buffer log record (ptr = 0x%p, bp = 0x%p).  XFS trying to replay bad (0) inode di_next_unlinked field",
@@ -1978,8 +1966,7 @@ xlog_recover_do_reg_buffer(
 					item->ri_buf[i].i_len, __func__);
 				goto next;
 			}
-			error = xfs_qm_dqcheck((xfs_disk_dquot_t *)
-					       item->ri_buf[i].i_addr,
+			error = xfs_qm_dqcheck(item->ri_buf[i].i_addr,
 					       -1, 0, XFS_QMOPT_DOWARN,
 					       "dquot_buf_recover");
 			if (error)
@@ -2192,7 +2179,7 @@ xlog_recover_do_buffer_trans(
 	xlog_recover_item_t	*item,
 	int			pass)
 {
-	xfs_buf_log_format_t	*buf_f;
+	xfs_buf_log_format_t	*buf_f = item->ri_buf[0].i_addr;
 	xfs_mount_t		*mp;
 	xfs_buf_t		*bp;
 	int			error;
@@ -2202,8 +2189,6 @@ xlog_recover_do_buffer_trans(
 	ushort			flags;
 	uint			buf_flags;
 
-	buf_f = (xfs_buf_log_format_t *)item->ri_buf[0].i_addr;
-
 	if (pass == XLOG_RECOVER_PASS1) {
 		/*
 		 * In this pass we're only looking for buf items
@@ -2324,10 +2309,9 @@ xlog_recover_do_inode_trans(
 	}
 
 	if (item->ri_buf[0].i_len == sizeof(xfs_inode_log_format_t)) {
-		in_f = (xfs_inode_log_format_t *)item->ri_buf[0].i_addr;
+		in_f = item->ri_buf[0].i_addr;
 	} else {
-		in_f = (xfs_inode_log_format_t *)kmem_alloc(
-			sizeof(xfs_inode_log_format_t), KM_SLEEP);
+		in_f = kmem_alloc(sizeof(xfs_inode_log_format_t), KM_SLEEP);
 		need_free = 1;
 		error = xfs_inode_item_format_convert(&item->ri_buf[0], in_f);
 		if (error)
@@ -2375,7 +2359,7 @@ xlog_recover_do_inode_trans(
 		error = EFSCORRUPTED;
 		goto error;
 	}
-	dicp = (xfs_icdinode_t *)(item->ri_buf[1].i_addr);
+	dicp = item->ri_buf[1].i_addr;
 	if (unlikely(dicp->di_magic != XFS_DINODE_MAGIC)) {
 		xfs_buf_relse(bp);
 		xfs_fs_cmn_err(CE_ALERT, mp,
@@ -2466,7 +2450,7 @@ xlog_recover_do_inode_trans(
 	}
 
 	/* The core is in in-core format */
-	xfs_dinode_to_disk(dip, (xfs_icdinode_t *)item->ri_buf[1].i_addr);
+	xfs_dinode_to_disk(dip, item->ri_buf[1].i_addr);
 
 	/* the rest is in on-disk format */
 	if (item->ri_buf[1].i_len > sizeof(struct xfs_icdinode)) {
@@ -2583,7 +2567,7 @@ xlog_recover_do_quotaoff_trans(
 		return (0);
 	}
 
-	qoff_f = (xfs_qoff_logformat_t *)item->ri_buf[0].i_addr;
+	qoff_f = item->ri_buf[0].i_addr;
 	ASSERT(qoff_f);
 
 	/*
@@ -2627,9 +2611,8 @@ xlog_recover_do_dquot_trans(
 	if (mp->m_qflags == 0)
 		return (0);
 
-	recddq = (xfs_disk_dquot_t *)item->ri_buf[1].i_addr;
-
-	if (item->ri_buf[1].i_addr == NULL) {
+	recddq = item->ri_buf[1].i_addr;
+	if (recddq == NULL) {
 		cmn_err(CE_ALERT,
 			"XFS: NULL dquot in %s.", __func__);
 		return XFS_ERROR(EIO);
@@ -2659,7 +2642,7 @@ xlog_recover_do_dquot_trans(
 	 * The other possibility, of course, is that the quota subsystem was
 	 * removed since the last mount - ENOSYS.
 	 */
-	dq_f = (xfs_dq_logformat_t *)item->ri_buf[0].i_addr;
+	dq_f = item->ri_buf[0].i_addr;
 	ASSERT(dq_f);
 	if ((error = xfs_qm_dqcheck(recddq,
 			   dq_f->qlf_id,
@@ -2726,7 +2709,7 @@ xlog_recover_do_efi_trans(
 		return 0;
 	}
 
-	efi_formatp = (xfs_efi_log_format_t *)item->ri_buf[0].i_addr;
+	efi_formatp = item->ri_buf[0].i_addr;
 
 	mp = log->l_mp;
 	efip = xfs_efi_init(mp, efi_formatp->efi_nextents);
@@ -2772,7 +2755,7 @@ xlog_recover_do_efd_trans(
 		return;
 	}
 
-	efd_formatp = (xfs_efd_log_format_t *)item->ri_buf[0].i_addr;
+	efd_formatp = item->ri_buf[0].i_addr;
 	ASSERT((item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_32_t) +
 		((efd_formatp->efd_nextents - 1) * sizeof(xfs_extent_32_t)))) ||
 	       (item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_64_t) +
@@ -3203,7 +3186,7 @@ xlog_recover_process_one_iunlink(
 	int				error;
 
 	ino = XFS_AGINO_TO_INO(mp, agno, agino);
-	error = xfs_iget(mp, NULL, ino, 0, 0, &ip, 0);
+	error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
 	if (error)
 		goto fail;
 
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index d7bf38c8cd1..aeb9d72ebf6 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -25,13 +25,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -268,10 +265,10 @@ xfs_sb_validate_fsb_count(
 
 #if XFS_BIG_BLKNOS     /* Limited by ULONG_MAX of page cache index */
 	if (nblocks >> (PAGE_CACHE_SHIFT - sbp->sb_blocklog) > ULONG_MAX)
-		return E2BIG;
+		return EFBIG;
 #else                  /* Limited by UINT_MAX of sectors */
 	if (nblocks << (sbp->sb_blocklog - BBSHIFT) > UINT_MAX)
-		return E2BIG;
+		return EFBIG;
 #endif
 	return 0;
 }
@@ -393,7 +390,7 @@ xfs_mount_validate_sb(
 	    xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
 		xfs_fs_mount_cmn_err(flags,
 			"file system too large to be mounted on this system.");
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 
 	if (unlikely(sbp->sb_inprogress)) {
@@ -413,17 +410,6 @@ xfs_mount_validate_sb(
 	return 0;
 }
 
-STATIC void
-xfs_initialize_perag_icache(
-	xfs_perag_t	*pag)
-{
-	if (!pag->pag_ici_init) {
-		rwlock_init(&pag->pag_ici_lock);
-		INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
-		pag->pag_ici_init = 1;
-	}
-}
-
 int
 xfs_initialize_perag(
 	xfs_mount_t	*mp,
@@ -436,13 +422,8 @@ xfs_initialize_perag(
 	xfs_agino_t	agino;
 	xfs_ino_t	ino;
 	xfs_sb_t	*sbp = &mp->m_sb;
-	xfs_ino_t	max_inum = XFS_MAXINUMBER_32;
 	int		error = -ENOMEM;
 
-	/* Check to see if the filesystem can overflow 32 bit inodes */
-	agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
-	ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
-
 	/*
 	 * Walk the current per-ag tree so we don't try to initialise AGs
 	 * that already exist (growfs case). Allocate and insert all the
@@ -456,11 +437,18 @@ xfs_initialize_perag(
 		}
 		if (!first_initialised)
 			first_initialised = index;
+
 		pag = kmem_zalloc(sizeof(*pag), KM_MAYFAIL);
 		if (!pag)
 			goto out_unwind;
+		pag->pag_agno = index;
+		pag->pag_mount = mp;
+		rwlock_init(&pag->pag_ici_lock);
+		INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
+
 		if (radix_tree_preload(GFP_NOFS))
 			goto out_unwind;
+
 		spin_lock(&mp->m_perag_lock);
 		if (radix_tree_insert(&mp->m_perag_tree, index, pag)) {
 			BUG();
@@ -469,25 +457,26 @@ xfs_initialize_perag(
 			error = -EEXIST;
 			goto out_unwind;
 		}
-		pag->pag_agno = index;
-		pag->pag_mount = mp;
 		spin_unlock(&mp->m_perag_lock);
 		radix_tree_preload_end();
 	}
 
-	/* Clear the mount flag if no inode can overflow 32 bits
-	 * on this filesystem, or if specifically requested..
+	/*
+	 * If we mount with the inode64 option, or no inode overflows
+	 * the legacy 32-bit address space clear the inode32 option.
 	 */
-	if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > max_inum) {
+	agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
+	ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
+
+	if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > XFS_MAXINUMBER_32)
 		mp->m_flags |= XFS_MOUNT_32BITINODES;
-	} else {
+	else
 		mp->m_flags &= ~XFS_MOUNT_32BITINODES;
-	}
 
-	/* If we can overflow then setup the ag headers accordingly */
 	if (mp->m_flags & XFS_MOUNT_32BITINODES) {
-		/* Calculate how much should be reserved for inodes to
-		 * meet the max inode percentage.
+		/*
+		 * Calculate how much should be reserved for inodes to meet
+		 * the max inode percentage.
 		 */
 		if (mp->m_maxicount) {
 			__uint64_t	icount;
@@ -500,30 +489,28 @@ xfs_initialize_perag(
 		} else {
 			max_metadata = agcount;
 		}
+
 		for (index = 0; index < agcount; index++) {
 			ino = XFS_AGINO_TO_INO(mp, index, agino);
-			if (ino > max_inum) {
+			if (ino > XFS_MAXINUMBER_32) {
 				index++;
 				break;
 			}
 
-			/* This ag is preferred for inodes */
 			pag = xfs_perag_get(mp, index);
 			pag->pagi_inodeok = 1;
 			if (index < max_metadata)
 				pag->pagf_metadata = 1;
-			xfs_initialize_perag_icache(pag);
 			xfs_perag_put(pag);
 		}
 	} else {
-		/* Setup default behavior for smaller filesystems */
 		for (index = 0; index < agcount; index++) {
 			pag = xfs_perag_get(mp, index);
 			pag->pagi_inodeok = 1;
-			xfs_initialize_perag_icache(pag);
 			xfs_perag_put(pag);
 		}
 	}
+
 	if (maxagi)
 		*maxagi = index;
 	return 0;
@@ -1009,7 +996,7 @@ xfs_check_sizes(xfs_mount_t *mp)
 	d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
 	if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
 		cmn_err(CE_WARN, "XFS: size check 1 failed");
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 	error = xfs_read_buf(mp, mp->m_ddev_targp,
 			     d - XFS_FSS_TO_BB(mp, 1),
@@ -1019,7 +1006,7 @@ xfs_check_sizes(xfs_mount_t *mp)
 	} else {
 		cmn_err(CE_WARN, "XFS: size check 2 failed");
 		if (error == ENOSPC)
-			error = XFS_ERROR(E2BIG);
+			error = XFS_ERROR(EFBIG);
 		return error;
 	}
 
@@ -1027,7 +1014,7 @@ xfs_check_sizes(xfs_mount_t *mp)
 		d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
 		if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
-			return XFS_ERROR(E2BIG);
+			return XFS_ERROR(EFBIG);
 		}
 		error = xfs_read_buf(mp, mp->m_logdev_targp,
 				     d - XFS_FSB_TO_BB(mp, 1),
@@ -1037,7 +1024,7 @@ xfs_check_sizes(xfs_mount_t *mp)
 		} else {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
 			if (error == ENOSPC)
-				error = XFS_ERROR(E2BIG);
+				error = XFS_ERROR(EFBIG);
 			return error;
 		}
 	}
@@ -1254,7 +1241,7 @@ xfs_mountfs(
 	 * Allocate and initialize the per-ag data.
 	 */
 	spin_lock_init(&mp->m_perag_lock);
-	INIT_RADIX_TREE(&mp->m_perag_tree, GFP_NOFS);
+	INIT_RADIX_TREE(&mp->m_perag_tree, GFP_ATOMIC);
 	error = xfs_initialize_perag(mp, sbp->sb_agcount, &mp->m_maxagi);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: Failed per-ag init: %d", error);
@@ -1310,7 +1297,7 @@ xfs_mountfs(
 	 * Get and sanity-check the root inode.
 	 * Save the pointer to it in the mount structure.
 	 */
-	error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: failed to read root inode");
 		goto out_log_dealloc;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d2c7eed4ed..622da2179a5 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -66,65 +66,6 @@ struct xfs_nameops;
 struct xfs_ail;
 struct xfs_quotainfo;
 
-
-/*
- * Prototypes and functions for the Data Migration subsystem.
- */
-
-typedef int	(*xfs_send_data_t)(int, struct xfs_inode *,
-			xfs_off_t, size_t, int, int *);
-typedef int	(*xfs_send_mmap_t)(struct vm_area_struct *, uint);
-typedef int	(*xfs_send_destroy_t)(struct xfs_inode *, dm_right_t);
-typedef int	(*xfs_send_namesp_t)(dm_eventtype_t, struct xfs_mount *,
-			struct xfs_inode *, dm_right_t,
-			struct xfs_inode *, dm_right_t,
-			const unsigned char *, const unsigned char *,
-			mode_t, int, int);
-typedef int	(*xfs_send_mount_t)(struct xfs_mount *, dm_right_t,
-			char *, char *);
-typedef void	(*xfs_send_unmount_t)(struct xfs_mount *, struct xfs_inode *,
-			dm_right_t, mode_t, int, int);
-
-typedef struct xfs_dmops {
-	xfs_send_data_t		xfs_send_data;
-	xfs_send_mmap_t		xfs_send_mmap;
-	xfs_send_destroy_t	xfs_send_destroy;
-	xfs_send_namesp_t	xfs_send_namesp;
-	xfs_send_mount_t	xfs_send_mount;
-	xfs_send_unmount_t	xfs_send_unmount;
-} xfs_dmops_t;
-
-#define XFS_DMAPI_UNMOUNT_FLAGS(mp) \
-	(((mp)->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ? 0 : DM_FLAGS_UNWANTED)
-
-#define XFS_SEND_DATA(mp, ev,ip,off,len,fl,lock) \
-	(*(mp)->m_dm_ops->xfs_send_data)(ev,ip,off,len,fl,lock)
-#define XFS_SEND_MMAP(mp, vma,fl) \
-	(*(mp)->m_dm_ops->xfs_send_mmap)(vma,fl)
-#define XFS_SEND_DESTROY(mp, ip,right) \
-	(*(mp)->m_dm_ops->xfs_send_destroy)(ip,right)
-#define XFS_SEND_NAMESP(mp, ev,b1,r1,b2,r2,n1,n2,mode,rval,fl) \
-	(*(mp)->m_dm_ops->xfs_send_namesp)(ev,NULL,b1,r1,b2,r2,n1,n2,mode,rval,fl)
-#define XFS_SEND_MOUNT(mp,right,path,name) \
-	(*(mp)->m_dm_ops->xfs_send_mount)(mp,right,path,name)
-#define XFS_SEND_PREUNMOUNT(mp) \
-do { \
-	if (mp->m_flags & XFS_MOUNT_DMAPI) { \
-		(*(mp)->m_dm_ops->xfs_send_namesp)(DM_EVENT_PREUNMOUNT, mp, \
-			(mp)->m_rootip, DM_RIGHT_NULL, \
-			(mp)->m_rootip, DM_RIGHT_NULL, \
-			NULL, NULL, 0, 0, XFS_DMAPI_UNMOUNT_FLAGS(mp)); \
-	} \
-} while (0)
-#define XFS_SEND_UNMOUNT(mp) \
-do { \
-	if (mp->m_flags & XFS_MOUNT_DMAPI) { \
-		(*(mp)->m_dm_ops->xfs_send_unmount)(mp, (mp)->m_rootip, \
-			DM_RIGHT_NULL, 0, 0, XFS_DMAPI_UNMOUNT_FLAGS(mp)); \
-	} \
-} while (0)
-
-
 #ifdef HAVE_PERCPU_SB
 
 /*
@@ -241,8 +182,6 @@ typedef struct xfs_mount {
 	uint			m_chsize;	/* size of next field */
 	struct xfs_chash	*m_chash;	/* fs private inode per-cluster
 						 * hash table */
-	struct xfs_dmops	*m_dm_ops;	/* vector of DMI ops */
-	struct xfs_qmops	*m_qm_ops;	/* vector of XQM ops */
 	atomic_t		m_active_trans;	/* number trans frozen */
 #ifdef HAVE_PERCPU_SB
 	xfs_icsb_cnts_t __percpu *m_sb_cnts;	/* per-cpu superblock counters */
@@ -259,7 +198,7 @@ typedef struct xfs_mount {
 	wait_queue_head_t	m_wait_single_sync_task;
 	__int64_t		m_update_flags;	/* sb flags we need to update
 						   on the next remount,rw */
-	struct list_head	m_mplist;	/* inode shrinker mount list */
+	struct shrinker		m_inode_shrink;	/* inode reclaim shrinker */
 } xfs_mount_t;
 
 /*
@@ -269,7 +208,6 @@ typedef struct xfs_mount {
 						   must be synchronous except
 						   for space allocations */
 #define XFS_MOUNT_DELAYLOG	(1ULL << 1)	/* delayed logging is enabled */
-#define XFS_MOUNT_DMAPI		(1ULL << 2)	/* dmapi is enabled */
 #define XFS_MOUNT_WAS_CLEAN	(1ULL << 3)
 #define XFS_MOUNT_FS_SHUTDOWN	(1ULL << 4)	/* atomic stop of all filesystem
 						   operations, typically for
@@ -282,8 +220,6 @@ typedef struct xfs_mount {
 #define XFS_MOUNT_GRPID		(1ULL << 9)	/* group-ID assigned from directory */
 #define XFS_MOUNT_NORECOVERY	(1ULL << 10)	/* no recovery - dirty fs */
 #define XFS_MOUNT_DFLT_IOSIZE	(1ULL << 12)	/* set default i/o size */
-#define XFS_MOUNT_OSYNCISOSYNC	(1ULL << 13)	/* o_sync is REALLY o_sync */
-						/* osyncisdsync is now default*/
 #define XFS_MOUNT_32BITINODES	(1ULL << 14)	/* do not create inodes above
 						 * 32 bits in size */
 #define XFS_MOUNT_SMALL_INUMS	(1ULL << 15)	/* users wants 32bit inodes */
@@ -440,11 +376,6 @@ extern int	xfs_sb_validate_fsb_count(struct xfs_sb *, __uint64_t);
 
 extern int	xfs_dev_is_read_only(struct xfs_mount *, char *);
 
-extern int	xfs_dmops_get(struct xfs_mount *);
-extern void	xfs_dmops_put(struct xfs_mount *);
-
-extern struct xfs_dmops xfs_dmcore_xfs;
-
 #endif	/* __KERNEL__ */
 
 extern void	xfs_mod_sb(struct xfs_trans *, __int64_t);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index fc1cda23b81..8fca957200d 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -24,12 +24,9 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -116,20 +113,7 @@ xfs_rename(
 	int		spaceres;
 	int		num_inodes;
 
-	xfs_itrace_entry(src_dp);
-	xfs_itrace_entry(target_dp);
-
-	if (DM_EVENT_ENABLED(src_dp, DM_EVENT_RENAME) ||
-	    DM_EVENT_ENABLED(target_dp, DM_EVENT_RENAME)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_RENAME,
-					src_dp, DM_RIGHT_NULL,
-					target_dp, DM_RIGHT_NULL,
-					src_name->name, target_name->name,
-					0, 0, 0);
-		if (error)
-			return error;
-	}
-	/* Return through std_return after this point. */
+	trace_xfs_rename(src_dp, target_dp, src_name, target_name);
 
 	new_parent = (src_dp != target_dp);
 	src_is_directory = ((src_ip->i_d.di_mode & S_IFMT) == S_IFDIR);
@@ -184,26 +168,14 @@ xfs_rename(
 	/*
 	 * Join all the inodes to the transaction. From this point on,
 	 * we can rely on either trans_commit or trans_cancel to unlock
-	 * them.  Note that we need to add a vnode reference to the
-	 * directories since trans_commit & trans_cancel will decrement
-	 * them when they unlock the inodes.  Also, we need to be careful
-	 * not to add an inode to the transaction more than once.
+	 * them.
 	 */
-	IHOLD(src_dp);
-	xfs_trans_ijoin(tp, src_dp, XFS_ILOCK_EXCL);
-
-	if (new_parent) {
-		IHOLD(target_dp);
-		xfs_trans_ijoin(tp, target_dp, XFS_ILOCK_EXCL);
-	}
-
-	IHOLD(src_ip);
-	xfs_trans_ijoin(tp, src_ip, XFS_ILOCK_EXCL);
-
-	if (target_ip) {
-		IHOLD(target_ip);
-		xfs_trans_ijoin(tp, target_ip, XFS_ILOCK_EXCL);
-	}
+	xfs_trans_ijoin_ref(tp, src_dp, XFS_ILOCK_EXCL);
+	if (new_parent)
+		xfs_trans_ijoin_ref(tp, target_dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, src_ip, XFS_ILOCK_EXCL);
+	if (target_ip)
+		xfs_trans_ijoin_ref(tp, target_ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * If we are using project inheritance, we only allow renames
@@ -369,26 +341,13 @@ xfs_rename(
 	 * trans_commit will unlock src_ip, target_ip & decrement
 	 * the vnode references.
 	 */
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-
-	/* Fall through to std_return with error = 0 or errno from
-	 * xfs_trans_commit	 */
-std_return:
-	if (DM_EVENT_ENABLED(src_dp, DM_EVENT_POSTRENAME) ||
-	    DM_EVENT_ENABLED(target_dp, DM_EVENT_POSTRENAME)) {
-		(void) XFS_SEND_NAMESP (mp, DM_EVENT_POSTRENAME,
-					src_dp, DM_RIGHT_NULL,
-					target_dp, DM_RIGHT_NULL,
-					src_name->name, target_name->name,
-					0, error, 0);
-	}
-	return error;
+	return xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 
  abort_return:
 	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
  error_return:
 	xfs_bmap_cancel(&free_list);
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 6be05f756d5..891260fea11 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -25,17 +25,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
@@ -129,7 +122,7 @@ xfs_growfs_rt_alloc(
 		cancelflags |= XFS_TRANS_ABORT;
 		error = xfs_bmapi(tp, ip, oblocks, nblocks - oblocks,
 			XFS_BMAPI_WRITE | XFS_BMAPI_METADATA, &firstblock,
-			resblks, &map, &nmap, &flist, NULL);
+			resblks, &map, &nmap, &flist);
 		if (!error && nmap < 1)
 			error = XFS_ERROR(ENOSPC);
 		if (error)
@@ -2247,7 +2240,7 @@ xfs_rtmount_init(
 		cmn_err(CE_WARN, "XFS: realtime mount -- %llu != %llu",
 			(unsigned long long) XFS_BB_TO_FSB(mp, d),
 			(unsigned long long) mp->m_sb.sb_rblocks);
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 	error = xfs_read_buf(mp, mp->m_rtdev_targp,
 				d - XFS_FSB_TO_BB(mp, 1),
@@ -2256,7 +2249,7 @@ xfs_rtmount_init(
 		cmn_err(CE_WARN,
 	"XFS: realtime mount -- xfs_read_buf failed, returned %d", error);
 		if (error == ENOSPC)
-			return XFS_ERROR(E2BIG);
+			return XFS_ERROR(EFBIG);
 		return error;
 	}
 	xfs_buf_relse(bp);
@@ -2277,12 +2270,12 @@ xfs_rtmount_inodes(
 	sbp = &mp->m_sb;
 	if (sbp->sb_rbmino == NULLFSINO)
 		return 0;
-	error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip);
 	if (error)
 		return error;
 	ASSERT(mp->m_rbmip != NULL);
 	ASSERT(sbp->sb_rsumino != NULLFSINO);
-	error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip);
 	if (error) {
 		IRELE(mp->m_rbmip);
 		return error;
diff --git a/fs/xfs/xfs_rtalloc.h b/fs/xfs/xfs_rtalloc.h
index b2d67adb6a0..ff614c29b44 100644
--- a/fs/xfs/xfs_rtalloc.h
+++ b/fs/xfs/xfs_rtalloc.h
@@ -147,7 +147,16 @@ xfs_growfs_rt(
 # define xfs_rtfree_extent(t,b,l)                       (ENOSYS)
 # define xfs_rtpick_extent(m,t,l,rb)                    (ENOSYS)
 # define xfs_growfs_rt(mp,in)                           (ENOSYS)
-# define xfs_rtmount_init(m)    (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
+static inline int		/* error */
+xfs_rtmount_init(
+	xfs_mount_t	*mp)	/* file system mount structure */
+{
+	if (mp->m_sb.sb_rblocks == 0)
+		return 0;
+
+	cmn_err(CE_WARN, "XFS: Not built with CONFIG_XFS_RT");
+	return ENOSYS;
+}
 # define xfs_rtmount_inodes(m)  (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
 # define xfs_rtunmount_inodes(m)
 #endif	/* CONFIG_XFS_RT */
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index e336742a58a..56861d5daae 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -24,27 +24,12 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_inode_item.h"
-#include "xfs_itable.h"
-#include "xfs_btree.h"
-#include "xfs_alloc.h"
-#include "xfs_ialloc.h"
-#include "xfs_attr.h"
-#include "xfs_bmap.h"
 #include "xfs_error.h"
-#include "xfs_buf_item.h"
 #include "xfs_rw.h"
-#include "xfs_trace.h"
 
 /*
  * Force a shutdown of the filesystem instantly while keeping
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index ce558efa2ea..fdca7416c75 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
+ * Copyright (C) 2010 Red Hat, Inc.
  * All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -24,16 +25,12 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -47,135 +44,491 @@
 #include "xfs_trace.h"
 
 kmem_zone_t	*xfs_trans_zone;
+kmem_zone_t	*xfs_log_item_desc_zone;
+
+
+/*
+ * Various log reservation values.
+ *
+ * These are based on the size of the file system block because that is what
+ * most transactions manipulate.  Each adds in an additional 128 bytes per
+ * item logged to try to account for the overhead of the transaction mechanism.
+ *
+ * Note:  Most of the reservations underestimate the number of allocation
+ * groups into which they could free extents in the xfs_bmap_finish() call.
+ * This is because the number in the worst case is quite high and quite
+ * unusual.  In order to fix this we need to change xfs_bmap_finish() to free
+ * extents in only a single AG at a time.  This will require changes to the
+ * EFI code as well, however, so that the EFI for the extents not freed is
+ * logged again in each transaction.  See SGI PV #261917.
+ *
+ * Reservation functions here avoid a huge stack in xfs_trans_init due to
+ * register overflow from temporaries in the calculations.
+ */
+
 
 /*
- * Reservation functions here avoid a huge stack in xfs_trans_init
- * due to register overflow from temporaries in the calculations.
+ * In a write transaction we can allocate a maximum of 2
+ * extents.  This gives:
+ *    the inode getting the new extents: inode size
+ *    the inode's bmap btree: max depth * block size
+ *    the agfs of the ags from which the extents are allocated: 2 * sector
+ *    the superblock free block counter: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ * And the bmap_finish transaction can free bmap blocks in a join:
+ *    the agfs of the ags containing the blocks: 2 * sector size
+ *    the agfls of the ags containing the blocks: 2 * sector size
+ *    the super block free block counter: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
  */
 STATIC uint
-xfs_calc_write_reservation(xfs_mount_t *mp)
+xfs_calc_write_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_WRITE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 2))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * In truncating a file we free up to two extents at once.  We can modify:
+ *    the inode being truncated: inode size
+ *    the inode's bmap btree: (max depth + 1) * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ *    the agf for each of the ags: 4 * sector size
+ *    the agfl for each of the ags: 4 * sector size
+ *    the super block to reflect the freed blocks: sector size
+ *    worst case split in allocation btrees per extent assuming 4 extents:
+ *		4 exts * 2 trees * (2 * max depth - 1) * block size
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_itruncate_reservation(xfs_mount_t *mp)
+xfs_calc_itruncate_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ITRUNCATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) +
+		     128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+		    (4 * mp->m_sb.sb_sectsize +
+		     4 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 4) +
+		     128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4)) +
+		     128 * 5 +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * In renaming a files we can modify:
+ *    the four inodes involved: 4 * inode size
+ *    the two directory btrees: 2 * (max depth + v2) * dir block size
+ *    the two directory bmap btrees: 2 * max depth * block size
+ * And the bmap_finish transaction can free dir and bmap blocks (two sets
+ *	of bmap blocks) giving:
+ *    the agf for the ags in which the blocks live: 3 * sector size
+ *    the agfl for the ags in which the blocks live: 3 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_rename_reservation(xfs_mount_t *mp)
+xfs_calc_rename_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_RENAME_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((4 * mp->m_sb.sb_inodesize +
+		     2 * XFS_DIROP_LOG_RES(mp) +
+		     128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp))),
+		    (3 * mp->m_sb.sb_sectsize +
+		     3 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 3) +
+		     128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))));
 }
 
+/*
+ * For creating a link to an inode:
+ *    the parent directory inode: inode size
+ *    the linked inode: inode size
+ *    the directory btree could split: (max depth + v2) * dir block size
+ *    the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free some bmap blocks giving:
+ *    the agf for the ag in which the blocks live: sector size
+ *    the agfl for the ag in which the blocks live: sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_link_reservation(xfs_mount_t *mp)
+xfs_calc_link_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_LINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+		    (mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * For removing a directory entry we can modify:
+ *    the parent directory inode: inode size
+ *    the removed inode: inode size
+ *    the directory btree could join: (max depth + v2) * dir block size
+ *    the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free the dir and bmap blocks giving:
+ *    the agf for the ag in which the blocks live: 2 * sector size
+ *    the agfl for the ag in which the blocks live: 2 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_remove_reservation(xfs_mount_t *mp)
+xfs_calc_remove_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_REMOVE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * For symlink we can modify:
+ *    the parent directory inode: inode size
+ *    the new inode: inode size
+ *    the inode btree entry: 1 block
+ *    the directory btree: (max depth + v2) * dir block size
+ *    the directory inode's bmap btree: (max depth + v2) * block size
+ *    the blocks for the symlink: 1 kB
+ * Or in the first xact we allocate some inodes giving:
+ *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_symlink_reservation(xfs_mount_t *mp)
+xfs_calc_symlink_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_SYMLINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, 1) +
+		     XFS_DIROP_LOG_RES(mp) +
+		     1024 +
+		     128 * (4 + XFS_DIROP_LOG_COUNT(mp))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+		     XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * For create we can modify:
+ *    the parent directory inode: inode size
+ *    the new inode: inode size
+ *    the inode btree entry: block size
+ *    the superblock for the nlink flag: sector size
+ *    the directory btree: (max depth + v2) * dir block size
+ *    the directory inode's bmap btree: (max depth + v2) * block size
+ * Or in the first xact we allocate some inodes giving:
+ *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ *    the superblock for the nlink flag: sector size
+ *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_create_reservation(xfs_mount_t *mp)
+xfs_calc_create_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_CREATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, 1) +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (3 + XFS_DIROP_LOG_COUNT(mp))),
+		    (3 * mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+		     XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * Making a new directory is the same as creating a new file.
+ */
 STATIC uint
-xfs_calc_mkdir_reservation(xfs_mount_t *mp)
+xfs_calc_mkdir_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_MKDIR_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return xfs_calc_create_reservation(mp);
 }
 
+/*
+ * In freeing an inode we can modify:
+ *    the inode being freed: inode size
+ *    the super block free inode counter: sector size
+ *    the agi hash list and counters: sector size
+ *    the inode btree entry: block size
+ *    the on disk inode before ours in the agi hash list: inode cluster size
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_ifree_reservation(xfs_mount_t *mp)
+xfs_calc_ifree_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_IFREE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, 1) +
+		MAX((__uint16_t)XFS_FSB_TO_B(mp, 1),
+		    XFS_INODE_CLUSTER_SIZE(mp)) +
+		128 * 5 +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * When only changing the inode we log the inode and possibly the superblock
+ * We also add a bit of slop for the transaction stuff.
+ */
 STATIC uint
-xfs_calc_ichange_reservation(xfs_mount_t *mp)
+xfs_calc_ichange_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ICHANGE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		512;
+
 }
 
+/*
+ * Growing the data section of the filesystem.
+ *	superblock
+ *	agi and agf
+ *	allocation btrees
+ */
 STATIC uint
-xfs_calc_growdata_reservation(xfs_mount_t *mp)
+xfs_calc_growdata_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWDATA_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize * 3 +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the first set of transactions (ALLOC) we allocate space to the
+ * bitmap or summary files.
+ *	superblock: sector size
+ *	agf of the ag from which the extent is allocated: sector size
+ *	bmap btree for bitmap/summary inode: max depth * blocksize
+ *	bitmap/summary inode: inode size
+ *	allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
+ */
 STATIC uint
-xfs_calc_growrtalloc_reservation(xfs_mount_t *mp)
+xfs_calc_growrtalloc_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTALLOC_LOG_RES(mp);
+	return 2 * mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+		mp->m_sb.sb_inodesize +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the second set of transactions (ZERO) we zero the new metadata blocks.
+ *	one bitmap/summary block: blocksize
+ */
 STATIC uint
-xfs_calc_growrtzero_reservation(xfs_mount_t *mp)
+xfs_calc_growrtzero_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTZERO_LOG_RES(mp);
+	return mp->m_sb.sb_blocksize + 128;
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the third set of transactions (FREE) we update metadata without
+ * allocating any new blocks.
+ *	superblock: sector size
+ *	bitmap inode: inode size
+ *	summary inode: inode size
+ *	one bitmap block: blocksize
+ *	summary blocks: new summary size
+ */
 STATIC uint
-xfs_calc_growrtfree_reservation(xfs_mount_t *mp)
+xfs_calc_growrtfree_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTFREE_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize +
+		2 * mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_blocksize +
+		mp->m_rsumsize +
+		128 * 5;
 }
 
+/*
+ * Logging the inode modification timestamp on a synchronous write.
+ *	inode
+ */
 STATIC uint
-xfs_calc_swrite_reservation(xfs_mount_t *mp)
+xfs_calc_swrite_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_SWRITE_LOG_RES(mp);
+	return mp->m_sb.sb_inodesize + 128;
 }
 
+/*
+ * Logging the inode mode bits when writing a setuid/setgid file
+ *	inode
+ */
 STATIC uint
 xfs_calc_writeid_reservation(xfs_mount_t *mp)
 {
-	return XFS_CALC_WRITEID_LOG_RES(mp);
+	return mp->m_sb.sb_inodesize + 128;
 }
 
+/*
+ * Converting the inode from non-attributed to attributed.
+ *	the inode being converted: inode size
+ *	agf block and superblock (for block allocation)
+ *	the new block (directory sized)
+ *	bmap blocks for the new directory block
+ *	allocation btrees
+ */
 STATIC uint
-xfs_calc_addafork_reservation(xfs_mount_t *mp)
+xfs_calc_addafork_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ADDAFORK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize * 2 +
+		mp->m_dirblksize +
+		XFS_FSB_TO_B(mp, XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (4 + XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1 +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Removing the attribute fork of a file
+ *    the inode being truncated: inode size
+ *    the inode's bmap btree: max depth * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ *    the agf for each of the ags: 4 * sector size
+ *    the agfl for each of the ags: 4 * sector size
+ *    the super block to reflect the freed blocks: sector size
+ *    worst case split in allocation btrees per extent assuming 4 extents:
+ *		4 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_attrinval_reservation(xfs_mount_t *mp)
+xfs_calc_attrinval_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRINVAL_LOG_RES(mp);
+	return MAX((mp->m_sb.sb_inodesize +
+		    XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+		    128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))),
+		   (4 * mp->m_sb.sb_sectsize +
+		    4 * mp->m_sb.sb_sectsize +
+		    mp->m_sb.sb_sectsize +
+		    XFS_ALLOCFREE_LOG_RES(mp, 4) +
+		    128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))));
 }
 
+/*
+ * Setting an attribute.
+ *	the inode getting the attribute
+ *	the superblock for allocations
+ *	the agfs extents are allocated from
+ *	the attribute btree * max depth
+ *	the inode allocation btree
+ * Since attribute transaction space is dependent on the size of the attribute,
+ * the calculation is done partially at mount time and partially at runtime.
+ */
 STATIC uint
-xfs_calc_attrset_reservation(xfs_mount_t *mp)
+xfs_calc_attrset_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRSET_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+		128 * (2 + XFS_DA_NODE_MAXDEPTH);
 }
 
+/*
+ * Removing an attribute.
+ *    the inode: inode size
+ *    the attribute btree could join: max depth * block size
+ *    the inode bmap btree could join or split: max depth * block size
+ * And the bmap_finish transaction can free the attr blocks freed giving:
+ *    the agf for the ag in which the blocks live: 2 * sector size
+ *    the agfl for the ag in which the blocks live: 2 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_attrrm_reservation(xfs_mount_t *mp)
+xfs_calc_attrrm_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRRM_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+		     128 * (1 + XFS_DA_NODE_MAXDEPTH +
+			    XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * Clearing a bad agino number in an agi hash bucket.
+ */
 STATIC uint
-xfs_calc_clear_agi_bucket_reservation(xfs_mount_t *mp)
+xfs_calc_clear_agi_bucket_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize + 128;
 }
 
 /*
@@ -184,11 +537,10 @@ xfs_calc_clear_agi_bucket_reservation(xfs_mount_t *mp)
  */
 void
 xfs_trans_init(
-	xfs_mount_t	*mp)
+	struct xfs_mount	*mp)
 {
-	xfs_trans_reservations_t	*resp;
+	struct xfs_trans_reservations *resp = &mp->m_reservations;
 
-	resp = &(mp->m_reservations);
 	resp->tr_write = xfs_calc_write_reservation(mp);
 	resp->tr_itruncate = xfs_calc_itruncate_reservation(mp);
 	resp->tr_rename = xfs_calc_rename_reservation(mp);
@@ -243,8 +595,7 @@ _xfs_trans_alloc(
 	tp->t_magic = XFS_TRANS_MAGIC;
 	tp->t_type = type;
 	tp->t_mountp = mp;
-	tp->t_items_free = XFS_LIC_NUM_SLOTS;
-	xfs_lic_init(&(tp->t_items));
+	INIT_LIST_HEAD(&tp->t_items);
 	INIT_LIST_HEAD(&tp->t_busy);
 	return tp;
 }
@@ -289,8 +640,7 @@ xfs_trans_dup(
 	ntp->t_magic = XFS_TRANS_MAGIC;
 	ntp->t_type = tp->t_type;
 	ntp->t_mountp = tp->t_mountp;
-	ntp->t_items_free = XFS_LIC_NUM_SLOTS;
-	xfs_lic_init(&(ntp->t_items));
+	INIT_LIST_HEAD(&ntp->t_items);
 	INIT_LIST_HEAD(&ntp->t_busy);
 
 	ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
@@ -770,6 +1120,108 @@ xfs_trans_unreserve_and_mod_sb(
 }
 
 /*
+ * Add the given log item to the transaction's list of log items.
+ *
+ * The log item will now point to its new descriptor with its li_desc field.
+ */
+void
+xfs_trans_add_item(
+	struct xfs_trans	*tp,
+	struct xfs_log_item	*lip)
+{
+	struct xfs_log_item_desc *lidp;
+
+	ASSERT(lip->li_mountp = tp->t_mountp);
+	ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+
+	lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
+
+	lidp->lid_item = lip;
+	lidp->lid_flags = 0;
+	lidp->lid_size = 0;
+	list_add_tail(&lidp->lid_trans, &tp->t_items);
+
+	lip->li_desc = lidp;
+}
+
+STATIC void
+xfs_trans_free_item_desc(
+	struct xfs_log_item_desc *lidp)
+{
+	list_del_init(&lidp->lid_trans);
+	kmem_zone_free(xfs_log_item_desc_zone, lidp);
+}
+
+/*
+ * Unlink and free the given descriptor.
+ */
+void
+xfs_trans_del_item(
+	struct xfs_log_item	*lip)
+{
+	xfs_trans_free_item_desc(lip->li_desc);
+	lip->li_desc = NULL;
+}
+
+/*
+ * Unlock all of the items of a transaction and free all the descriptors
+ * of that transaction.
+ */
+STATIC void
+xfs_trans_free_items(
+	struct xfs_trans	*tp,
+	xfs_lsn_t		commit_lsn,
+	int			flags)
+{
+	struct xfs_log_item_desc *lidp, *next;
+
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
+		struct xfs_log_item	*lip = lidp->lid_item;
+
+		lip->li_desc = NULL;
+
+		if (commit_lsn != NULLCOMMITLSN)
+			IOP_COMMITTING(lip, commit_lsn);
+		if (flags & XFS_TRANS_ABORT)
+			lip->li_flags |= XFS_LI_ABORTED;
+		IOP_UNLOCK(lip);
+
+		xfs_trans_free_item_desc(lidp);
+	}
+}
+
+/*
+ * Unlock the items associated with a transaction.
+ *
+ * Items which were not logged should be freed.  Those which were logged must
+ * still be tracked so they can be unpinned when the transaction commits.
+ */
+STATIC void
+xfs_trans_unlock_items(
+	struct xfs_trans	*tp,
+	xfs_lsn_t		commit_lsn)
+{
+	struct xfs_log_item_desc *lidp, *next;
+
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
+		struct xfs_log_item	*lip = lidp->lid_item;
+
+		lip->li_desc = NULL;
+
+		if (commit_lsn != NULLCOMMITLSN)
+			IOP_COMMITTING(lip, commit_lsn);
+		IOP_UNLOCK(lip);
+
+		/*
+		 * Free the descriptor if the item is not dirty
+		 * within this transaction.
+		 */
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
+			xfs_trans_free_item_desc(lidp);
+	}
+}
+
+/*
  * Total up the number of log iovecs needed to commit this
  * transaction.  The transaction itself needs one for the
  * transaction header.  Ask each dirty item in turn how many
@@ -780,30 +1232,27 @@ xfs_trans_count_vecs(
 	struct xfs_trans	*tp)
 {
 	int			nvecs;
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 
 	nvecs = 1;
-	lidp = xfs_trans_first_item(tp);
-	ASSERT(lidp != NULL);
 
 	/* In the non-debug case we need to start bailing out if we
 	 * didn't find a log_item here, return zero and let trans_commit
 	 * deal with it.
 	 */
-	if (lidp == NULL)
+	if (list_empty(&tp->t_items)) {
+		ASSERT(0);
 		return 0;
+	}
 
-	while (lidp != NULL) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/*
 		 * Skip items which aren't dirty in this transaction.
 		 */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 		lidp->lid_size = IOP_SIZE(lidp->lid_item);
 		nvecs += lidp->lid_size;
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	return nvecs;
@@ -823,7 +1272,7 @@ xfs_trans_fill_vecs(
 	struct xfs_trans	*tp,
 	struct xfs_log_iovec	*log_vector)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 	struct xfs_log_iovec	*vecp;
 	uint			nitems;
 
@@ -834,14 +1283,11 @@ xfs_trans_fill_vecs(
 	vecp = log_vector + 1;
 
 	nitems = 0;
-	lidp = xfs_trans_first_item(tp);
-	ASSERT(lidp);
-	while (lidp) {
+	ASSERT(!list_empty(&tp->t_items));
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/* Skip items which aren't dirty in this transaction. */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 
 		/*
 		 * The item may be marked dirty but not log anything.  This can
@@ -852,7 +1298,6 @@ xfs_trans_fill_vecs(
 		IOP_FORMAT(lidp->lid_item, vecp);
 		vecp += lidp->lid_size;
 		IOP_PIN(lidp->lid_item);
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	/*
@@ -930,7 +1375,7 @@ xfs_trans_item_committed(
 	 * log item flags, if anyone else stales the buffer we do not want to
 	 * pay any attention to it.
 	 */
-	IOP_UNPIN(lip);
+	IOP_UNPIN(lip, 0);
 }
 
 /*
@@ -947,24 +1392,15 @@ xfs_trans_committed(
 	struct xfs_trans	*tp,
 	int			abortflag)
 {
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
+	struct xfs_log_item_desc *lidp, *next;
 
 	/* Call the transaction's completion callback if there is one. */
 	if (tp->t_callback != NULL)
 		tp->t_callback(tp, tp->t_callarg);
 
-	for (lidp = xfs_trans_first_item(tp);
-	     lidp != NULL;
-	     lidp = xfs_trans_next_item(tp, lidp)) {
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
 		xfs_trans_item_committed(lidp->lid_item, tp->t_lsn, abortflag);
-	}
-
-	/* free the item chunks, ignoring the embedded chunk */
-	for (licp = tp->t_items.lic_next; licp != NULL; licp = next_licp) {
-		next_licp = licp->lic_next;
-		kmem_free(licp);
+		xfs_trans_free_item_desc(lidp);
 	}
 
 	xfs_trans_free(tp);
@@ -979,16 +1415,14 @@ xfs_trans_uncommit(
 	struct xfs_trans	*tp,
 	uint			flags)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 
-	for (lidp = xfs_trans_first_item(tp);
-	     lidp != NULL;
-	     lidp = xfs_trans_next_item(tp, lidp)) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/*
 		 * Unpin all but those that aren't dirty.
 		 */
 		if (lidp->lid_flags & XFS_LID_DIRTY)
-			IOP_UNPIN_REMOVE(lidp->lid_item, tp);
+			IOP_UNPIN(lidp->lid_item, 1);
 	}
 
 	xfs_trans_unreserve_and_mod_sb(tp);
@@ -1154,33 +1588,28 @@ STATIC struct xfs_log_vec *
 xfs_trans_alloc_log_vecs(
 	xfs_trans_t	*tp)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 	struct xfs_log_vec	*lv = NULL;
 	struct xfs_log_vec	*ret_lv = NULL;
 
-	lidp = xfs_trans_first_item(tp);
 
 	/* Bail out if we didn't find a log item.  */
-	if (!lidp) {
+	if (list_empty(&tp->t_items)) {
 		ASSERT(0);
 		return NULL;
 	}
 
-	while (lidp != NULL) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		struct xfs_log_vec *new_lv;
 
 		/* Skip items which aren't dirty in this transaction. */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 
 		/* Skip items that do not have any vectors for writing */
 		lidp->lid_size = IOP_SIZE(lidp->lid_item);
-		if (!lidp->lid_size) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!lidp->lid_size)
 			continue;
-		}
 
 		new_lv = kmem_zalloc(sizeof(*new_lv) +
 				lidp->lid_size * sizeof(struct xfs_log_iovec),
@@ -1195,7 +1624,6 @@ xfs_trans_alloc_log_vecs(
 		else
 			lv->lv_next = new_lv;
 		lv = new_lv;
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	return ret_lv;
@@ -1354,12 +1782,6 @@ xfs_trans_cancel(
 	int			flags)
 {
 	int			log_flags;
-#ifdef DEBUG
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_t		*lip;
-	int			i;
-#endif
 	xfs_mount_t		*mp = tp->t_mountp;
 
 	/*
@@ -1378,21 +1800,11 @@ xfs_trans_cancel(
 		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 	}
 #ifdef DEBUG
-	if (!(flags & XFS_TRANS_ABORT)) {
-		licp = &(tp->t_items);
-		while (licp != NULL) {
-			lidp = licp->lic_descs;
-			for (i = 0; i < licp->lic_unused; i++, lidp++) {
-				if (xfs_lic_isfree(licp, i)) {
-					continue;
-				}
-
-				lip = lidp->lid_item;
-				if (!XFS_FORCED_SHUTDOWN(mp))
-					ASSERT(!(lip->li_type == XFS_LI_EFD));
-			}
-			licp = licp->lic_next;
-		}
+	if (!(flags & XFS_TRANS_ABORT) && !XFS_FORCED_SHUTDOWN(mp)) {
+		struct xfs_log_item_desc *lidp;
+
+		list_for_each_entry(lidp, &tp->t_items, lid_trans)
+			ASSERT(!(lidp->lid_item->li_type == XFS_LI_EFD));
 	}
 #endif
 	xfs_trans_unreserve_and_mod_sb(tp);
@@ -1480,7 +1892,6 @@ xfs_trans_roll(
 	if (error)
 		return error;
 
-	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(trans, dp);
+	xfs_trans_ijoin(trans, dp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 8c69e7824f6..c13c0f97b49 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -161,105 +161,14 @@ typedef struct xfs_trans_header {
  * the amount of space needed to log the item it describes
  * once we get to commit processing (see xfs_trans_commit()).
  */
-typedef struct xfs_log_item_desc {
+struct xfs_log_item_desc {
 	struct xfs_log_item	*lid_item;
-	ushort		lid_size;
-	unsigned char	lid_flags;
-	unsigned char	lid_index;
-} xfs_log_item_desc_t;
+	ushort			lid_size;
+	unsigned char		lid_flags;
+	struct list_head	lid_trans;
+};
 
 #define XFS_LID_DIRTY		0x1
-#define XFS_LID_PINNED		0x2
-
-/*
- * This structure is used to maintain a chunk list of log_item_desc
- * structures. The free field is a bitmask indicating which descriptors
- * in this chunk's array are free.  The unused field is the first value
- * not used since this chunk was allocated.
- */
-#define	XFS_LIC_NUM_SLOTS	15
-typedef struct xfs_log_item_chunk {
-	struct xfs_log_item_chunk	*lic_next;
-	ushort				lic_free;
-	ushort				lic_unused;
-	xfs_log_item_desc_t		lic_descs[XFS_LIC_NUM_SLOTS];
-} xfs_log_item_chunk_t;
-
-#define	XFS_LIC_MAX_SLOT	(XFS_LIC_NUM_SLOTS - 1)
-#define	XFS_LIC_FREEMASK	((1 << XFS_LIC_NUM_SLOTS) - 1)
-
-
-/*
- * Initialize the given chunk.  Set the chunk's free descriptor mask
- * to indicate that all descriptors are free.  The caller gets to set
- * lic_unused to the right value (0 matches all free).  The
- * lic_descs.lid_index values are set up as each desc is allocated.
- */
-static inline void xfs_lic_init(xfs_log_item_chunk_t *cp)
-{
-	cp->lic_free = XFS_LIC_FREEMASK;
-}
-
-static inline void xfs_lic_init_slot(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_descs[slot].lid_index = (unsigned char)(slot);
-}
-
-static inline int xfs_lic_vacancy(xfs_log_item_chunk_t *cp)
-{
-	return cp->lic_free & XFS_LIC_FREEMASK;
-}
-
-static inline void xfs_lic_all_free(xfs_log_item_chunk_t *cp)
-{
-	cp->lic_free = XFS_LIC_FREEMASK;
-}
-
-static inline int xfs_lic_are_all_free(xfs_log_item_chunk_t *cp)
-{
-	return ((cp->lic_free & XFS_LIC_FREEMASK) == XFS_LIC_FREEMASK);
-}
-
-static inline int xfs_lic_isfree(xfs_log_item_chunk_t *cp, int slot)
-{
-	return (cp->lic_free & (1 << slot));
-}
-
-static inline void xfs_lic_claim(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_free &= ~(1 << slot);
-}
-
-static inline void xfs_lic_relse(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_free |= 1 << slot;
-}
-
-static inline xfs_log_item_desc_t *
-xfs_lic_slot(xfs_log_item_chunk_t *cp, int slot)
-{
-	return &(cp->lic_descs[slot]);
-}
-
-static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
-{
-	return (uint)dp->lid_index;
-}
-
-/*
- * Calculate the address of a chunk given a descriptor pointer:
- * dp - dp->lid_index give the address of the start of the lic_descs array.
- * From this we subtract the offset of the lic_descs field in a chunk.
- * All of this yields the address of the chunk, which is
- * cast to a chunk pointer.
- */
-static inline xfs_log_item_chunk_t *
-xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
-{
-	return (xfs_log_item_chunk_t*) \
-		(((xfs_caddr_t)((dp) - (dp)->lid_index)) - \
-		(xfs_caddr_t)(((xfs_log_item_chunk_t*)0)->lic_descs));
-}
 
 #define	XFS_TRANS_MAGIC		0x5452414E	/* 'TRAN' */
 /*
@@ -275,8 +184,6 @@ xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
 /*
  * Values for call flags parameter.
  */
-#define	XFS_TRANS_NOSLEEP		0x1
-#define	XFS_TRANS_WAIT			0x2
 #define	XFS_TRANS_RELEASE_LOG_RES	0x4
 #define	XFS_TRANS_ABORT			0x8
 
@@ -300,24 +207,6 @@ xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
 
 
 /*
- * Various log reservation values.
- * These are based on the size of the file system block
- * because that is what most transactions manipulate.
- * Each adds in an additional 128 bytes per item logged to
- * try to account for the overhead of the transaction mechanism.
- *
- * Note:
- * Most of the reservations underestimate the number of allocation
- * groups into which they could free extents in the xfs_bmap_finish()
- * call.  This is because the number in the worst case is quite high
- * and quite unusual.  In order to fix this we need to change
- * xfs_bmap_finish() to free extents in only a single AG at a time.
- * This will require changes to the EFI code as well, however, so that
- * the EFI for the extents not freed is logged again in each transaction.
- * See bug 261917.
- */
-
-/*
  * Per-extent log reservation for the allocation btree changes
  * involved in freeing or allocating an extent.
  * 2 trees * (2 blocks/level * max depth - 1) * block size
@@ -341,429 +230,36 @@ xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
 	(XFS_DAENTER_BLOCKS(mp, XFS_DATA_FORK) + \
 	 XFS_DAENTER_BMAPS(mp, XFS_DATA_FORK) + 1)
 
-/*
- * In a write transaction we can allocate a maximum of 2
- * extents.  This gives:
- *    the inode getting the new extents: inode size
- *    the inode's bmap btree: max depth * block size
- *    the agfs of the ags from which the extents are allocated: 2 * sector
- *    the superblock free block counter: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- * And the bmap_finish transaction can free bmap blocks in a join:
- *    the agfs of the ags containing the blocks: 2 * sector size
- *    the agfls of the ags containing the blocks: 2 * sector size
- *    the super block free block counter: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_WRITE_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + XFS_ALLOCFREE_LOG_COUNT(mp, 2)))),\
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
 
 #define	XFS_WRITE_LOG_RES(mp)	((mp)->m_reservations.tr_write)
-
-/*
- * In truncating a file we free up to two extents at once.  We can modify:
- *    the inode being truncated: inode size
- *    the inode's bmap btree: (max depth + 1) * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- *    the agf for each of the ags: 4 * sector size
- *    the agfl for each of the ags: 4 * sector size
- *    the super block to reflect the freed blocks: sector size
- *    worst case split in allocation btrees per extent assuming 4 extents:
- *		4 exts * 2 trees * (2 * max depth - 1) * block size
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_ITRUNCATE_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) + \
-	  (128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
-	 ((4 * (mp)->m_sb.sb_sectsize) + \
-	  (4 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 4) + \
-	  (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))) + \
-	  (128 * 5) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	   (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	    XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_ITRUNCATE_LOG_RES(mp)   ((mp)->m_reservations.tr_itruncate)
-
-/*
- * In renaming a files we can modify:
- *    the four inodes involved: 4 * inode size
- *    the two directory btrees: 2 * (max depth + v2) * dir block size
- *    the two directory bmap btrees: 2 * max depth * block size
- * And the bmap_finish transaction can free dir and bmap blocks (two sets
- *	of bmap blocks) giving:
- *    the agf for the ags in which the blocks live: 3 * sector size
- *    the agfl for the ags in which the blocks live: 3 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_RENAME_LOG_RES(mp) \
-	(MAX( \
-	 ((4 * (mp)->m_sb.sb_inodesize) + \
-	  (2 * XFS_DIROP_LOG_RES(mp)) + \
-	  (128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((3 * (mp)->m_sb.sb_sectsize) + \
-	  (3 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 3) + \
-	  (128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))))))
-
 #define	XFS_RENAME_LOG_RES(mp)	((mp)->m_reservations.tr_rename)
-
-/*
- * For creating a link to an inode:
- *    the parent directory inode: inode size
- *    the linked inode: inode size
- *    the directory btree could split: (max depth + v2) * dir block size
- *    the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free some bmap blocks giving:
- *    the agf for the ag in which the blocks live: sector size
- *    the agfl for the ag in which the blocks live: sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_LINK_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((mp)->m_sb.sb_sectsize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_LINK_LOG_RES(mp)	((mp)->m_reservations.tr_link)
-
-/*
- * For removing a directory entry we can modify:
- *    the parent directory inode: inode size
- *    the removed inode: inode size
- *    the directory btree could join: (max depth + v2) * dir block size
- *    the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free the dir and bmap blocks giving:
- *    the agf for the ag in which the blocks live: 2 * sector size
- *    the agfl for the ag in which the blocks live: 2 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_REMOVE_LOG_RES(mp)	\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
 #define	XFS_REMOVE_LOG_RES(mp)	((mp)->m_reservations.tr_remove)
-
-/*
- * For symlink we can modify:
- *    the parent directory inode: inode size
- *    the new inode: inode size
- *    the inode btree entry: 1 block
- *    the directory btree: (max depth + v2) * dir block size
- *    the directory inode's bmap btree: (max depth + v2) * block size
- *    the blocks for the symlink: 1 kB
- * Or in the first xact we allocate some inodes giving:
- *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
- *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_SYMLINK_LOG_RES(mp)		\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B(mp, 1) + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  1024 + \
-	  (128 * (4 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 (2 * (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
-	  XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_SYMLINK_LOG_RES(mp)	((mp)->m_reservations.tr_symlink)
-
-/*
- * For create we can modify:
- *    the parent directory inode: inode size
- *    the new inode: inode size
- *    the inode btree entry: block size
- *    the superblock for the nlink flag: sector size
- *    the directory btree: (max depth + v2) * dir block size
- *    the directory inode's bmap btree: (max depth + v2) * block size
- * Or in the first xact we allocate some inodes giving:
- *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
- *    the superblock for the nlink flag: sector size
- *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_CREATE_LOG_RES(mp)		\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B(mp, 1) + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (3 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 (3 * (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
-	  XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_CREATE_LOG_RES(mp)	((mp)->m_reservations.tr_create)
-
-/*
- * Making a new directory is the same as creating a new file.
- */
-#define	XFS_CALC_MKDIR_LOG_RES(mp)	XFS_CALC_CREATE_LOG_RES(mp)
-
 #define	XFS_MKDIR_LOG_RES(mp)	((mp)->m_reservations.tr_mkdir)
-
-/*
- * In freeing an inode we can modify:
- *    the inode being freed: inode size
- *    the super block free inode counter: sector size
- *    the agi hash list and counters: sector size
- *    the inode btree entry: block size
- *    the on disk inode before ours in the agi hash list: inode cluster size
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_IFREE_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize + \
-	 (mp)->m_sb.sb_sectsize + \
-	 XFS_FSB_TO_B((mp), 1) + \
-	 MAX((__uint16_t)XFS_FSB_TO_B((mp), 1), XFS_INODE_CLUSTER_SIZE(mp)) + \
-	 (128 * 5) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
-
 #define	XFS_IFREE_LOG_RES(mp)	((mp)->m_reservations.tr_ifree)
-
-/*
- * When only changing the inode we log the inode and possibly the superblock
- * We also add a bit of slop for the transaction stuff.
- */
-#define	XFS_CALC_ICHANGE_LOG_RES(mp)	((mp)->m_sb.sb_inodesize + \
-					 (mp)->m_sb.sb_sectsize + 512)
-
 #define	XFS_ICHANGE_LOG_RES(mp)	((mp)->m_reservations.tr_ichange)
-
-/*
- * Growing the data section of the filesystem.
- *	superblock
- *	agi and agf
- *	allocation btrees
- */
-#define	XFS_CALC_GROWDATA_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize * 3 + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_GROWDATA_LOG_RES(mp)    ((mp)->m_reservations.tr_growdata)
-
-/*
- * Growing the rt section of the filesystem.
- * In the first set of transactions (ALLOC) we allocate space to the
- * bitmap or summary files.
- *	superblock: sector size
- *	agf of the ag from which the extent is allocated: sector size
- *	bmap btree for bitmap/summary inode: max depth * blocksize
- *	bitmap/summary inode: inode size
- *	allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
- */
-#define	XFS_CALC_GROWRTALLOC_LOG_RES(mp) \
-	(2 * (mp)->m_sb.sb_sectsize + \
-	 XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
-	 (mp)->m_sb.sb_inodesize + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * \
-	  (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_GROWRTALLOC_LOG_RES(mp)	((mp)->m_reservations.tr_growrtalloc)
-
-/*
- * Growing the rt section of the filesystem.
- * In the second set of transactions (ZERO) we zero the new metadata blocks.
- *	one bitmap/summary block: blocksize
- */
-#define	XFS_CALC_GROWRTZERO_LOG_RES(mp) \
-	((mp)->m_sb.sb_blocksize + 128)
-
 #define	XFS_GROWRTZERO_LOG_RES(mp)	((mp)->m_reservations.tr_growrtzero)
-
-/*
- * Growing the rt section of the filesystem.
- * In the third set of transactions (FREE) we update metadata without
- * allocating any new blocks.
- *	superblock: sector size
- *	bitmap inode: inode size
- *	summary inode: inode size
- *	one bitmap block: blocksize
- *	summary blocks: new summary size
- */
-#define	XFS_CALC_GROWRTFREE_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize + \
-	 2 * (mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_blocksize + \
-	 (mp)->m_rsumsize + \
-	 (128 * 5))
-
 #define	XFS_GROWRTFREE_LOG_RES(mp)	((mp)->m_reservations.tr_growrtfree)
-
-/*
- * Logging the inode modification timestamp on a synchronous write.
- *	inode
- */
-#define	XFS_CALC_SWRITE_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + 128)
-
 #define	XFS_SWRITE_LOG_RES(mp)	((mp)->m_reservations.tr_swrite)
-
 /*
  * Logging the inode timestamps on an fsync -- same as SWRITE
  * as long as SWRITE logs the entire inode core
  */
 #define XFS_FSYNC_TS_LOG_RES(mp)        ((mp)->m_reservations.tr_swrite)
-
-/*
- * Logging the inode mode bits when writing a setuid/setgid file
- *	inode
- */
-#define	XFS_CALC_WRITEID_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + 128)
-
 #define	XFS_WRITEID_LOG_RES(mp)	((mp)->m_reservations.tr_swrite)
-
-/*
- * Converting the inode from non-attributed to attributed.
- *	the inode being converted: inode size
- *	agf block and superblock (for block allocation)
- *	the new block (directory sized)
- *	bmap blocks for the new directory block
- *	allocation btrees
- */
-#define	XFS_CALC_ADDAFORK_LOG_RES(mp)	\
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize * 2 + \
-	 (mp)->m_dirblksize + \
-	 XFS_FSB_TO_B(mp, (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1)) + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * (4 + (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) + \
-		 XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_ADDAFORK_LOG_RES(mp)	((mp)->m_reservations.tr_addafork)
-
-/*
- * Removing the attribute fork of a file
- *    the inode being truncated: inode size
- *    the inode's bmap btree: max depth * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- *    the agf for each of the ags: 4 * sector size
- *    the agfl for each of the ags: 4 * sector size
- *    the super block to reflect the freed blocks: sector size
- *    worst case split in allocation btrees per extent assuming 4 extents:
- *		4 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_ATTRINVAL_LOG_RES(mp)	\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
-	  (128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))), \
-	 ((4 * (mp)->m_sb.sb_sectsize) + \
-	  (4 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 4) + \
-	  (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))))))
-
 #define	XFS_ATTRINVAL_LOG_RES(mp)	((mp)->m_reservations.tr_attrinval)
-
-/*
- * Setting an attribute.
- *	the inode getting the attribute
- *	the superblock for allocations
- *	the agfs extents are allocated from
- *	the attribute btree * max depth
- *	the inode allocation btree
- * Since attribute transaction space is dependent on the size of the attribute,
- * the calculation is done partially at mount time and partially at runtime.
- */
-#define	XFS_CALC_ATTRSET_LOG_RES(mp)	\
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
-	  (128 * (2 + XFS_DA_NODE_MAXDEPTH)))
-
 #define	XFS_ATTRSET_LOG_RES(mp, ext)	\
 	((mp)->m_reservations.tr_attrset + \
 	 (ext * (mp)->m_sb.sb_sectsize) + \
 	 (ext * XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))) + \
 	 (128 * (ext + (ext * XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))))
-
-/*
- * Removing an attribute.
- *    the inode: inode size
- *    the attribute btree could join: max depth * block size
- *    the inode bmap btree could join or split: max depth * block size
- * And the bmap_finish transaction can free the attr blocks freed giving:
- *    the agf for the ag in which the blocks live: 2 * sector size
- *    the agfl for the ag in which the blocks live: 2 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_ATTRRM_LOG_RES(mp)	\
-	(MAX( \
-	  ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
-	  (128 * (1 + XFS_DA_NODE_MAXDEPTH + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
 #define	XFS_ATTRRM_LOG_RES(mp)	((mp)->m_reservations.tr_attrrm)
-
-/*
- * Clearing a bad agino number in an agi hash bucket.
- */
-#define	XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize + 128)
-
 #define	XFS_CLEAR_AGI_BUCKET_LOG_RES(mp)  ((mp)->m_reservations.tr_clearagi)
 
 
@@ -849,8 +345,7 @@ typedef struct xfs_item_ops {
 	uint (*iop_size)(xfs_log_item_t *);
 	void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
 	void (*iop_pin)(xfs_log_item_t *);
-	void (*iop_unpin)(xfs_log_item_t *);
-	void (*iop_unpin_remove)(xfs_log_item_t *, struct xfs_trans *);
+	void (*iop_unpin)(xfs_log_item_t *, int remove);
 	uint (*iop_trylock)(xfs_log_item_t *);
 	void (*iop_unlock)(xfs_log_item_t *);
 	xfs_lsn_t (*iop_committed)(xfs_log_item_t *, xfs_lsn_t);
@@ -862,8 +357,7 @@ typedef struct xfs_item_ops {
 #define IOP_SIZE(ip)		(*(ip)->li_ops->iop_size)(ip)
 #define IOP_FORMAT(ip,vp)	(*(ip)->li_ops->iop_format)(ip, vp)
 #define IOP_PIN(ip)		(*(ip)->li_ops->iop_pin)(ip)
-#define IOP_UNPIN(ip)		(*(ip)->li_ops->iop_unpin)(ip)
-#define IOP_UNPIN_REMOVE(ip,tp) (*(ip)->li_ops->iop_unpin_remove)(ip, tp)
+#define IOP_UNPIN(ip, remove)	(*(ip)->li_ops->iop_unpin)(ip, remove)
 #define IOP_TRYLOCK(ip)		(*(ip)->li_ops->iop_trylock)(ip)
 #define IOP_UNLOCK(ip)		(*(ip)->li_ops->iop_unlock)(ip)
 #define IOP_COMMITTED(ip, lsn)	(*(ip)->li_ops->iop_committed)(ip, lsn)
@@ -927,8 +421,7 @@ typedef struct xfs_trans {
 	int64_t			t_rblocks_delta;/* superblock rblocks change */
 	int64_t			t_rextents_delta;/* superblocks rextents chg */
 	int64_t			t_rextslog_delta;/* superblocks rextslog chg */
-	unsigned int		t_items_free;	/* log item descs free */
-	xfs_log_item_chunk_t	t_items;	/* first log item desc chunk */
+	struct list_head	t_items;	/* log item descriptors */
 	xfs_trans_header_t	t_header;	/* header for in-log trans */
 	struct list_head	t_busy;		/* list of busy extents */
 	unsigned long		t_pflags;	/* saved process flags state */
@@ -980,8 +473,8 @@ void		xfs_trans_dquot_buf(xfs_trans_t *, struct xfs_buf *, uint);
 void		xfs_trans_inode_alloc_buf(xfs_trans_t *, struct xfs_buf *);
 int		xfs_trans_iget(struct xfs_mount *, xfs_trans_t *,
 			       xfs_ino_t , uint, uint, struct xfs_inode **);
-void		xfs_trans_ijoin(xfs_trans_t *, struct xfs_inode *, uint);
-void		xfs_trans_ihold(xfs_trans_t *, struct xfs_inode *);
+void		xfs_trans_ijoin_ref(struct xfs_trans *, struct xfs_inode *, uint);
+void		xfs_trans_ijoin(struct xfs_trans *, struct xfs_inode *);
 void		xfs_trans_log_buf(xfs_trans_t *, struct xfs_buf *, uint, uint);
 void		xfs_trans_log_inode(xfs_trans_t *, struct xfs_inode *, uint);
 struct xfs_efi_log_item	*xfs_trans_get_efi(xfs_trans_t *, uint);
@@ -1006,6 +499,7 @@ int		xfs_trans_ail_init(struct xfs_mount *);
 void		xfs_trans_ail_destroy(struct xfs_mount *);
 
 extern kmem_zone_t	*xfs_trans_zone;
+extern kmem_zone_t	*xfs_log_item_desc_zone;
 
 #endif	/* __KERNEL__ */
 
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index e799824f724..dc9069568ff 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -24,7 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_error.h"
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index 63d81a22f4f..90af025e683 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_buf_item.h"
@@ -51,36 +47,17 @@ xfs_trans_buf_item_match(
 	xfs_daddr_t		blkno,
 	int			len)
 {
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_desc_t	*lidp;
-	xfs_buf_log_item_t	*blip;
-	int			i;
+	struct xfs_log_item_desc *lidp;
+	struct xfs_buf_log_item	*blip;
 
 	len = BBTOB(len);
-	for (licp = &tp->t_items; licp != NULL; licp = licp->lic_next) {
-		if (xfs_lic_are_all_free(licp)) {
-			ASSERT(licp == &tp->t_items);
-			ASSERT(licp->lic_next == NULL);
-			return NULL;
-		}
-
-		for (i = 0; i < licp->lic_unused; i++) {
-			/*
-			 * Skip unoccupied slots.
-			 */
-			if (xfs_lic_isfree(licp, i))
-				continue;
-
-			lidp = xfs_lic_slot(licp, i);
-			blip = (xfs_buf_log_item_t *)lidp->lid_item;
-			if (blip->bli_item.li_type != XFS_LI_BUF)
-				continue;
-
-			if (XFS_BUF_TARGET(blip->bli_buf) == target &&
-			    XFS_BUF_ADDR(blip->bli_buf) == blkno &&
-			    XFS_BUF_COUNT(blip->bli_buf) == len)
-				return blip->bli_buf;
-		}
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
+		blip = (struct xfs_buf_log_item *)lidp->lid_item;
+		if (blip->bli_item.li_type == XFS_LI_BUF &&
+		    XFS_BUF_TARGET(blip->bli_buf) == target &&
+		    XFS_BUF_ADDR(blip->bli_buf) == blkno &&
+		    XFS_BUF_COUNT(blip->bli_buf) == len)
+			return blip->bli_buf;
 	}
 
 	return NULL;
@@ -127,7 +104,7 @@ _xfs_trans_bjoin(
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t *)bip);
+	xfs_trans_add_item(tp, &bip->bli_item);
 
 	/*
 	 * Initialize b_fsprivate2 so we can find it with incore_match()
@@ -483,7 +460,6 @@ xfs_trans_brelse(xfs_trans_t	*tp,
 {
 	xfs_buf_log_item_t	*bip;
 	xfs_log_item_t		*lip;
-	xfs_log_item_desc_t	*lidp;
 
 	/*
 	 * Default to a normal brelse() call if the tp is NULL.
@@ -514,13 +490,6 @@ xfs_trans_brelse(xfs_trans_t	*tp,
 	ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
-	/*
-	 * Find the item descriptor pointing to this buffer's
-	 * log item.  It must be there.
-	 */
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
-
 	trace_xfs_trans_brelse(bip);
 
 	/*
@@ -536,7 +505,7 @@ xfs_trans_brelse(xfs_trans_t	*tp,
 	 * If the buffer is dirty within this transaction, we can't
 	 * release it until we commit.
 	 */
-	if (lidp->lid_flags & XFS_LID_DIRTY)
+	if (bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY)
 		return;
 
 	/*
@@ -553,7 +522,7 @@ xfs_trans_brelse(xfs_trans_t	*tp,
 	/*
 	 * Free up the log item descriptor tracking the released item.
 	 */
-	xfs_trans_free_item(tp, lidp);
+	xfs_trans_del_item(&bip->bli_item);
 
 	/*
 	 * Clear the hold flag in the buf log item if it is set.
@@ -665,7 +634,6 @@ xfs_trans_log_buf(xfs_trans_t	*tp,
 		  uint		last)
 {
 	xfs_buf_log_item_t	*bip;
-	xfs_log_item_desc_t	*lidp;
 
 	ASSERT(XFS_BUF_ISBUSY(bp));
 	ASSERT(XFS_BUF_FSPRIVATE2(bp, xfs_trans_t *) == tp);
@@ -690,7 +658,7 @@ xfs_trans_log_buf(xfs_trans_t	*tp,
 	bip = XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	XFS_BUF_SET_IODONE_FUNC(bp, xfs_buf_iodone_callbacks);
-	bip->bli_item.li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*))xfs_buf_iodone;
+	bip->bli_item.li_cb = xfs_buf_iodone;
 
 	trace_xfs_trans_log_buf(bip);
 
@@ -707,11 +675,8 @@ xfs_trans_log_buf(xfs_trans_t	*tp,
 		bip->bli_format.blf_flags &= ~XFS_BLF_CANCEL;
 	}
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 	bip->bli_flags |= XFS_BLI_LOGGED;
 	xfs_buf_item_log(bip, first, last);
 }
@@ -740,7 +705,6 @@ xfs_trans_binval(
 	xfs_trans_t	*tp,
 	xfs_buf_t	*bp)
 {
-	xfs_log_item_desc_t	*lidp;
 	xfs_buf_log_item_t	*bip;
 
 	ASSERT(XFS_BUF_ISBUSY(bp));
@@ -748,8 +712,6 @@ xfs_trans_binval(
 	ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL);
 
 	bip = XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *);
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
 	trace_xfs_trans_binval(bip);
@@ -764,7 +726,7 @@ xfs_trans_binval(
 		ASSERT(!(bip->bli_flags & (XFS_BLI_LOGGED | XFS_BLI_DIRTY)));
 		ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_INODE_BUF));
 		ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
-		ASSERT(lidp->lid_flags & XFS_LID_DIRTY);
+		ASSERT(bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY);
 		ASSERT(tp->t_flags & XFS_TRANS_DIRTY);
 		return;
 	}
@@ -797,7 +759,7 @@ xfs_trans_binval(
 	bip->bli_format.blf_flags |= XFS_BLF_CANCEL;
 	memset((char *)(bip->bli_format.blf_data_map), 0,
 	      (bip->bli_format.blf_map_size * sizeof(uint)));
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 	tp->t_flags |= XFS_TRANS_DIRTY;
 }
 
@@ -853,12 +815,9 @@ xfs_trans_stale_inode_buf(
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
 	bip->bli_flags |= XFS_BLI_STALE_INODE;
-	bip->bli_item.li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*))
-		xfs_buf_iodone;
+	bip->bli_item.li_cb = xfs_buf_iodone;
 }
 
-
-
 /*
  * Mark the buffer as being one which contains newly allocated
  * inodes.  We need to make sure that even if this buffer is
diff --git a/fs/xfs/xfs_trans_extfree.c b/fs/xfs/xfs_trans_extfree.c
index 27cce2a9c7e..f783d5e9fa7 100644
--- a/fs/xfs/xfs_trans_extfree.c
+++ b/fs/xfs/xfs_trans_extfree.c
@@ -23,7 +23,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_extfree_item.h"
@@ -49,9 +48,8 @@ xfs_trans_get_efi(xfs_trans_t	*tp,
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)efip);
-
-	return (efip);
+	xfs_trans_add_item(tp, &efip->efi_item);
+	return efip;
 }
 
 /*
@@ -65,15 +63,11 @@ xfs_trans_log_efi_extent(xfs_trans_t		*tp,
 			 xfs_fsblock_t		start_block,
 			 xfs_extlen_t		ext_len)
 {
-	xfs_log_item_desc_t	*lidp;
 	uint			next_extent;
 	xfs_extent_t		*extp;
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)efip);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	efip->efi_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	next_extent = efip->efi_next_extent;
 	ASSERT(next_extent < efip->efi_format.efi_nextents);
@@ -106,9 +100,8 @@ xfs_trans_get_efd(xfs_trans_t		*tp,
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)efdp);
-
-	return (efdp);
+	xfs_trans_add_item(tp, &efdp->efd_item);
+	return efdp;
 }
 
 /*
@@ -122,15 +115,11 @@ xfs_trans_log_efd_extent(xfs_trans_t		*tp,
 			 xfs_fsblock_t		start_block,
 			 xfs_extlen_t		ext_len)
 {
-	xfs_log_item_desc_t	*lidp;
 	uint			next_extent;
 	xfs_extent_t		*extp;
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)efdp);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	efdp->efd_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	next_extent = efdp->efd_next_extent;
 	ASSERT(next_extent < efdp->efd_format.efd_nextents);
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 785ff101da0..cdc53a1050c 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -24,20 +24,16 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_trans_priv.h"
 #include "xfs_inode_item.h"
+#include "xfs_trace.h"
 
 #ifdef XFS_TRANS_DEBUG
 STATIC void
@@ -47,7 +43,6 @@ xfs_trans_inode_broot_debug(
 #define	xfs_trans_inode_broot_debug(ip)
 #endif
 
-
 /*
  * Get an inode and join it to the transaction.
  */
@@ -62,78 +57,66 @@ xfs_trans_iget(
 {
 	int			error;
 
-	error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp, 0);
-	if (!error && tp)
-		xfs_trans_ijoin(tp, *ipp, lock_flags);
+	error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp);
+	if (!error && tp) {
+		xfs_trans_ijoin(tp, *ipp);
+		(*ipp)->i_itemp->ili_lock_flags = lock_flags;
+	}
 	return error;
 }
 
 /*
- * Add the locked inode to the transaction.
- * The inode must be locked, and it cannot be associated with any
- * transaction.  The caller must specify the locks already held
- * on the inode.
+ * Add a locked inode to the transaction.
+ *
+ * The inode must be locked, and it cannot be associated with any transaction.
  */
 void
 xfs_trans_ijoin(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	uint		lock_flags)
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip)
 {
 	xfs_inode_log_item_t	*iip;
 
 	ASSERT(ip->i_transp == NULL);
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(lock_flags & XFS_ILOCK_EXCL);
 	if (ip->i_itemp == NULL)
 		xfs_inode_item_init(ip, ip->i_mount);
 	iip = ip->i_itemp;
-	ASSERT(iip->ili_flags == 0);
+	ASSERT(iip->ili_lock_flags == 0);
 
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)(iip));
+	xfs_trans_add_item(tp, &iip->ili_item);
 
 	xfs_trans_inode_broot_debug(ip);
 
 	/*
-	 * If the IO lock is already held, mark that in the inode log item.
-	 */
-	if (lock_flags & XFS_IOLOCK_EXCL) {
-		iip->ili_flags |= XFS_ILI_IOLOCKED_EXCL;
-	} else if (lock_flags & XFS_IOLOCK_SHARED) {
-		iip->ili_flags |= XFS_ILI_IOLOCKED_SHARED;
-	}
-
-	/*
 	 * Initialize i_transp so we can find it with xfs_inode_incore()
 	 * in xfs_trans_iget() above.
 	 */
 	ip->i_transp = tp;
 }
 
-
-
 /*
- * Mark the inode as not needing to be unlocked when the inode item's
- * IOP_UNLOCK() routine is called.  The inode must already be locked
- * and associated with the given transaction.
+ * Add a locked inode to the transaction.
+ *
+ *
+ * Grabs a reference to the inode which will be dropped when the transaction
+ * is commited.  The inode will also be unlocked at that point.  The inode
+ * must be locked, and it cannot be associated with any transaction.
  */
-/*ARGSUSED*/
 void
-xfs_trans_ihold(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip)
+xfs_trans_ijoin_ref(
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	uint			lock_flags)
 {
-	ASSERT(ip->i_transp == tp);
-	ASSERT(ip->i_itemp != NULL);
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-
-	ip->i_itemp->ili_flags |= XFS_ILI_HOLD;
+	xfs_trans_ijoin(tp, ip);
+	IHOLD(ip);
+	ip->i_itemp->ili_lock_flags = lock_flags;
 }
 
-
 /*
  * This is called to mark the fields indicated in fieldmask as needing
  * to be logged when the transaction is committed.  The inode must
@@ -149,17 +132,12 @@ xfs_trans_log_inode(
 	xfs_inode_t	*ip,
 	uint		flags)
 {
-	xfs_log_item_desc_t	*lidp;
-
 	ASSERT(ip->i_transp == tp);
 	ASSERT(ip->i_itemp != NULL);
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)(ip->i_itemp));
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	ip->i_itemp->ili_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	/*
 	 * Always OR in the bits from the ili_last_fields field.
diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c
deleted file mode 100644
index f11d37d06dc..00000000000
--- a/fs/xfs/xfs_trans_item.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_inum.h"
-#include "xfs_trans.h"
-#include "xfs_trans_priv.h"
-/* XXX: from here down needed until struct xfs_trans has its own ailp */
-#include "xfs_bit.h"
-#include "xfs_buf_item.h"
-#include "xfs_sb.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
-#include "xfs_mount.h"
-
-STATIC int	xfs_trans_unlock_chunk(xfs_log_item_chunk_t *,
-					int, int, xfs_lsn_t);
-
-/*
- * This is called to add the given log item to the transaction's
- * list of log items.  It must find a free log item descriptor
- * or allocate a new one and add the item to that descriptor.
- * The function returns a pointer to item descriptor used to point
- * to the new item.  The log item will now point to its new descriptor
- * with its li_desc field.
- */
-xfs_log_item_desc_t *
-xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
-{
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_chunk_t	*licp;
-	int			i=0;
-
-	/*
-	 * If there are no free descriptors, allocate a new chunk
-	 * of them and put it at the front of the chunk list.
-	 */
-	if (tp->t_items_free == 0) {
-		licp = (xfs_log_item_chunk_t*)
-		       kmem_alloc(sizeof(xfs_log_item_chunk_t), KM_SLEEP);
-		ASSERT(licp != NULL);
-		/*
-		 * Initialize the chunk, and then
-		 * claim the first slot in the newly allocated chunk.
-		 */
-		xfs_lic_init(licp);
-		xfs_lic_claim(licp, 0);
-		licp->lic_unused = 1;
-		xfs_lic_init_slot(licp, 0);
-		lidp = xfs_lic_slot(licp, 0);
-
-		/*
-		 * Link in the new chunk and update the free count.
-		 */
-		licp->lic_next = tp->t_items.lic_next;
-		tp->t_items.lic_next = licp;
-		tp->t_items_free = XFS_LIC_NUM_SLOTS - 1;
-
-		/*
-		 * Initialize the descriptor and the generic portion
-		 * of the log item.
-		 *
-		 * Point the new slot at this item and return it.
-		 * Also point the log item at its currently active
-		 * descriptor and set the item's mount pointer.
-		 */
-		lidp->lid_item = lip;
-		lidp->lid_flags = 0;
-		lidp->lid_size = 0;
-		lip->li_desc = lidp;
-		lip->li_mountp = tp->t_mountp;
-		lip->li_ailp = tp->t_mountp->m_ail;
-		return lidp;
-	}
-
-	/*
-	 * Find the free descriptor. It is somewhere in the chunklist
-	 * of descriptors.
-	 */
-	licp = &tp->t_items;
-	while (licp != NULL) {
-		if (xfs_lic_vacancy(licp)) {
-			if (licp->lic_unused <= XFS_LIC_MAX_SLOT) {
-				i = licp->lic_unused;
-				ASSERT(xfs_lic_isfree(licp, i));
-				break;
-			}
-			for (i = 0; i <= XFS_LIC_MAX_SLOT; i++) {
-				if (xfs_lic_isfree(licp, i))
-					break;
-			}
-			ASSERT(i <= XFS_LIC_MAX_SLOT);
-			break;
-		}
-		licp = licp->lic_next;
-	}
-	ASSERT(licp != NULL);
-	/*
-	 * If we find a free descriptor, claim it,
-	 * initialize it, and return it.
-	 */
-	xfs_lic_claim(licp, i);
-	if (licp->lic_unused <= i) {
-		licp->lic_unused = i + 1;
-		xfs_lic_init_slot(licp, i);
-	}
-	lidp = xfs_lic_slot(licp, i);
-	tp->t_items_free--;
-	lidp->lid_item = lip;
-	lidp->lid_flags = 0;
-	lidp->lid_size = 0;
-	lip->li_desc = lidp;
-	lip->li_mountp = tp->t_mountp;
-	lip->li_ailp = tp->t_mountp->m_ail;
-	return lidp;
-}
-
-/*
- * Free the given descriptor.
- *
- * This requires setting the bit in the chunk's free mask corresponding
- * to the given slot.
- */
-void
-xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
-{
-	uint			slot;
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	**licpp;
-
-	slot = xfs_lic_desc_to_slot(lidp);
-	licp = xfs_lic_desc_to_chunk(lidp);
-	xfs_lic_relse(licp, slot);
-	lidp->lid_item->li_desc = NULL;
-	tp->t_items_free++;
-
-	/*
-	 * If there are no more used items in the chunk and this is not
-	 * the chunk embedded in the transaction structure, then free
-	 * the chunk. First pull it from the chunk list and then
-	 * free it back to the heap.  We didn't bother with a doubly
-	 * linked list here because the lists should be very short
-	 * and this is not a performance path.  It's better to save
-	 * the memory of the extra pointer.
-	 *
-	 * Also decrement the transaction structure's count of free items
-	 * by the number in a chunk since we are freeing an empty chunk.
-	 */
-	if (xfs_lic_are_all_free(licp) && (licp != &(tp->t_items))) {
-		licpp = &(tp->t_items.lic_next);
-		while (*licpp != licp) {
-			ASSERT(*licpp != NULL);
-			licpp = &((*licpp)->lic_next);
-		}
-		*licpp = licp->lic_next;
-		kmem_free(licp);
-		tp->t_items_free -= XFS_LIC_NUM_SLOTS;
-	}
-}
-
-/*
- * This is called to find the descriptor corresponding to the given
- * log item.  It returns a pointer to the descriptor.
- * The log item MUST have a corresponding descriptor in the given
- * transaction.  This routine does not return NULL, it panics.
- *
- * The descriptor pointer is kept in the log item's li_desc field.
- * Just return it.
- */
-/*ARGSUSED*/
-xfs_log_item_desc_t *
-xfs_trans_find_item(xfs_trans_t	*tp, xfs_log_item_t *lip)
-{
-	ASSERT(lip->li_desc != NULL);
-
-	return lip->li_desc;
-}
-
-
-/*
- * Return a pointer to the first descriptor in the chunk list.
- * This does not return NULL if there are none, it panics.
- *
- * The first descriptor must be in either the first or second chunk.
- * This is because the only chunk allowed to be empty is the first.
- * All others are freed when they become empty.
- *
- * At some point this and xfs_trans_next_item() should be optimized
- * to quickly look at the mask to determine if there is anything to
- * look at.
- */
-xfs_log_item_desc_t *
-xfs_trans_first_item(xfs_trans_t *tp)
-{
-	xfs_log_item_chunk_t	*licp;
-	int			i;
-
-	licp = &tp->t_items;
-	/*
-	 * If it's not in the first chunk, skip to the second.
-	 */
-	if (xfs_lic_are_all_free(licp)) {
-		licp = licp->lic_next;
-	}
-
-	/*
-	 * Return the first non-free descriptor in the chunk.
-	 */
-	ASSERT(!xfs_lic_are_all_free(licp));
-	for (i = 0; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-	cmn_err(CE_WARN, "xfs_trans_first_item() -- no first item");
-	return NULL;
-}
-
-
-/*
- * Given a descriptor, return the next descriptor in the chunk list.
- * This returns NULL if there are no more used descriptors in the list.
- *
- * We do this by first locating the chunk in which the descriptor resides,
- * and then scanning forward in the chunk and the list for the next
- * used descriptor.
- */
-/*ARGSUSED*/
-xfs_log_item_desc_t *
-xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
-{
-	xfs_log_item_chunk_t	*licp;
-	int			i;
-
-	licp = xfs_lic_desc_to_chunk(lidp);
-
-	/*
-	 * First search the rest of the chunk. The for loop keeps us
-	 * from referencing things beyond the end of the chunk.
-	 */
-	for (i = (int)xfs_lic_desc_to_slot(lidp) + 1; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-
-	/*
-	 * Now search the next chunk.  It must be there, because the
-	 * next chunk would have been freed if it were empty.
-	 * If there is no next chunk, return NULL.
-	 */
-	if (licp->lic_next == NULL) {
-		return NULL;
-	}
-
-	licp = licp->lic_next;
-	ASSERT(!xfs_lic_are_all_free(licp));
-	for (i = 0; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-	ASSERT(0);
-	/* NOTREACHED */
-	return NULL; /* keep gcc quite */
-}
-
-/*
- * This is called to unlock all of the items of a transaction and to free
- * all the descriptors of that transaction.
- *
- * It walks the list of descriptors and unlocks each item.  It frees
- * each chunk except that embedded in the transaction as it goes along.
- */
-void
-xfs_trans_free_items(
-	xfs_trans_t	*tp,
-	xfs_lsn_t	commit_lsn,
-	int		flags)
-{
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
-	int			abort;
-
-	abort = flags & XFS_TRANS_ABORT;
-	licp = &tp->t_items;
-	/*
-	 * Special case the embedded chunk so we don't free it below.
-	 */
-	if (!xfs_lic_are_all_free(licp)) {
-		(void) xfs_trans_unlock_chunk(licp, 1, abort, commit_lsn);
-		xfs_lic_all_free(licp);
-		licp->lic_unused = 0;
-	}
-	licp = licp->lic_next;
-
-	/*
-	 * Unlock each item in each chunk and free the chunks.
-	 */
-	while (licp != NULL) {
-		ASSERT(!xfs_lic_are_all_free(licp));
-		(void) xfs_trans_unlock_chunk(licp, 1, abort, commit_lsn);
-		next_licp = licp->lic_next;
-		kmem_free(licp);
-		licp = next_licp;
-	}
-
-	/*
-	 * Reset the transaction structure's free item count.
-	 */
-	tp->t_items_free = XFS_LIC_NUM_SLOTS;
-	tp->t_items.lic_next = NULL;
-}
-
-
-
-/*
- * This is called to unlock the items associated with a transaction.
- * Items which were not logged should be freed.
- * Those which were logged must still be tracked so they can be unpinned
- * when the transaction commits.
- */
-void
-xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
-{
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
-	xfs_log_item_chunk_t	**licpp;
-	int			freed;
-
-	freed = 0;
-	licp = &tp->t_items;
-
-	/*
-	 * Special case the embedded chunk so we don't free.
-	 */
-	if (!xfs_lic_are_all_free(licp)) {
-		freed = xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
-	}
-	licpp = &(tp->t_items.lic_next);
-	licp = licp->lic_next;
-
-	/*
-	 * Unlock each item in each chunk, free non-dirty descriptors,
-	 * and free empty chunks.
-	 */
-	while (licp != NULL) {
-		ASSERT(!xfs_lic_are_all_free(licp));
-		freed += xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
-		next_licp = licp->lic_next;
-		if (xfs_lic_are_all_free(licp)) {
-			*licpp = next_licp;
-			kmem_free(licp);
-			freed -= XFS_LIC_NUM_SLOTS;
-		} else {
-			licpp = &(licp->lic_next);
-		}
-		ASSERT(*licpp == next_licp);
-		licp = next_licp;
-	}
-
-	/*
-	 * Fix the free descriptor count in the transaction.
-	 */
-	tp->t_items_free += freed;
-}
-
-/*
- * Unlock each item pointed to by a descriptor in the given chunk.
- * Stamp the commit lsn into each item if necessary.
- * Free descriptors pointing to items which are not dirty if freeing_chunk
- * is zero. If freeing_chunk is non-zero, then we need to unlock all
- * items in the chunk.
- * 
- * Return the number of descriptors freed.
- */
-STATIC int
-xfs_trans_unlock_chunk(
-	xfs_log_item_chunk_t	*licp,
-	int			freeing_chunk,
-	int			abort,
-	xfs_lsn_t		commit_lsn)
-{
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_t		*lip;
-	int			i;
-	int			freed;
-
-	freed = 0;
-	lidp = licp->lic_descs;
-	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-		lip = lidp->lid_item;
-		lip->li_desc = NULL;
-
-		if (commit_lsn != NULLCOMMITLSN)
-			IOP_COMMITTING(lip, commit_lsn);
-		if (abort)
-			lip->li_flags |= XFS_LI_ABORTED;
-		IOP_UNLOCK(lip);
-
-		/*
-		 * Free the descriptor if the item is not dirty
-		 * within this transaction and the caller is not
-		 * going to just free the entire thing regardless.
-		 */
-		if (!(freeing_chunk) &&
-		    (!(lidp->lid_flags & XFS_LID_DIRTY) || abort)) {
-			xfs_lic_relse(licp, i);
-			freed++;
-		}
-	}
-
-	return freed;
-}
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index c6e4f2c8de6..e2d93d8ead7 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -23,22 +23,8 @@ struct xfs_log_item_desc;
 struct xfs_mount;
 struct xfs_trans;
 
-/*
- * From xfs_trans_item.c
- */
-struct xfs_log_item_desc	*xfs_trans_add_item(struct xfs_trans *,
-					    struct xfs_log_item *);
-void				xfs_trans_free_item(struct xfs_trans *,
-					    struct xfs_log_item_desc *);
-struct xfs_log_item_desc	*xfs_trans_find_item(struct xfs_trans *,
-					     struct xfs_log_item *);
-struct xfs_log_item_desc	*xfs_trans_first_item(struct xfs_trans *);
-struct xfs_log_item_desc	*xfs_trans_next_item(struct xfs_trans *,
-					     struct xfs_log_item_desc *);
-
-void	xfs_trans_unlock_items(struct xfs_trans *tp, xfs_lsn_t commit_lsn);
-void	xfs_trans_free_items(struct xfs_trans *tp, xfs_lsn_t commit_lsn,
-				int flags);
+void	xfs_trans_add_item(struct xfs_trans *, struct xfs_log_item *);
+void	xfs_trans_del_item(struct xfs_log_item *);
 
 void	xfs_trans_item_committed(struct xfs_log_item *lip,
 				xfs_lsn_t commit_lsn, int aborted);
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 4d88616bde9..b7d5769d2df 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -25,18 +25,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
 #include "xfs_quota.h"
-#include "xfs_rw.h"
 #include "xfs_itable.h"
 #include "xfs_utils.h"
 
@@ -324,86 +320,3 @@ xfs_bumplink(
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	return 0;
 }
-
-/*
- * Try to truncate the given file to 0 length.  Currently called
- * only out of xfs_remove when it has to truncate a file to free
- * up space for the remove to proceed.
- */
-int
-xfs_truncate_file(
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip)
-{
-	xfs_trans_t	*tp;
-	int		error;
-
-#ifdef QUOTADEBUG
-	/*
-	 * This is called to truncate the quotainodes too.
-	 */
-	if (XFS_IS_UQUOTA_ON(mp)) {
-		if (ip->i_ino != mp->m_sb.sb_uquotino)
-			ASSERT(ip->i_udquot);
-	}
-	if (XFS_IS_OQUOTA_ON(mp)) {
-		if (ip->i_ino != mp->m_sb.sb_gquotino)
-			ASSERT(ip->i_gdquot);
-	}
-#endif
-	/*
-	 * Make the call to xfs_itruncate_start before starting the
-	 * transaction, because we cannot make the call while we're
-	 * in a transaction.
-	 */
-	xfs_ilock(ip, XFS_IOLOCK_EXCL);
-	error = xfs_itruncate_start(ip, XFS_ITRUNC_DEFINITE, (xfs_fsize_t)0);
-	if (error) {
-		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-		return error;
-	}
-
-	tp = xfs_trans_alloc(mp, XFS_TRANS_TRUNCATE_FILE);
-	if ((error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
-				      XFS_TRANS_PERM_LOG_RES,
-				      XFS_ITRUNCATE_LOG_COUNT))) {
-		xfs_trans_cancel(tp, 0);
-		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-		return error;
-	}
-
-	/*
-	 * Follow the normal truncate locking protocol.  Since we
-	 * hold the inode in the transaction, we know that its number
-	 * of references will stay constant.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
-	/*
-	 * Signal a sync xaction.  The only case where that isn't
-	 * the case is if we're truncating an already unlinked file
-	 * on a wsync fs.  In that case, we know the blocks can't
-	 * reappear in the file because the links to file are
-	 * permanently toast.  Currently, we're always going to
-	 * want a sync transaction because this code is being
-	 * called from places where nlink is guaranteed to be 1
-	 * but I'm leaving the tests in to protect against future
-	 * changes -- rcc.
-	 */
-	error = xfs_itruncate_finish(&tp, ip, (xfs_fsize_t)0,
-				     XFS_DATA_FORK,
-				     ((ip->i_d.di_nlink != 0 ||
-				       !(mp->m_flags & XFS_MOUNT_WSYNC))
-				      ? 1 : 0));
-	if (error) {
-		xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
-				 XFS_TRANS_ABORT);
-	} else {
-		xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-		error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	}
-	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	return error;
-}
diff --git a/fs/xfs/xfs_utils.h b/fs/xfs/xfs_utils.h
index ef321225d26..f55b9678264 100644
--- a/fs/xfs/xfs_utils.h
+++ b/fs/xfs/xfs_utils.h
@@ -18,7 +18,6 @@
 #ifndef __XFS_UTILS_H__
 #define __XFS_UTILS_H__
 
-extern int xfs_truncate_file(xfs_mount_t *, xfs_inode_t *);
 extern int xfs_dir_ialloc(xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
 				xfs_dev_t, cred_t *, prid_t, int,
 				xfs_inode_t **, int *);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 9d376be0ea3..3ac137dd531 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -26,19 +26,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
@@ -73,7 +68,7 @@ xfs_setattr(
 	struct xfs_dquot	*udqp, *gdqp, *olddquot1, *olddquot2;
 	int			need_iolock = 1;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_setattr(ip);
 
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
@@ -143,16 +138,6 @@ xfs_setattr(
 			goto error_return;
 		}
 	} else {
-		if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
-		    !(flags & XFS_ATTR_DMI)) {
-			int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR;
-			code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip,
-				iattr->ia_size, 0, dmflags, NULL);
-			if (code) {
-				lock_flags = 0;
-				goto error_return;
-			}
-		}
 		if (need_iolock)
 			lock_flags |= XFS_IOLOCK_EXCL;
 	}
@@ -267,7 +252,7 @@ xfs_setattr(
 		if (code) {
 			ASSERT(tp == NULL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
-			ASSERT(lock_flags == XFS_IOLOCK_EXCL);
+			ASSERT(lock_flags == XFS_IOLOCK_EXCL || !need_iolock);
 			goto error_return;
 		}
 		tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
@@ -283,8 +268,7 @@ xfs_setattr(
 		commit_flags = XFS_TRANS_RELEASE_LOG_RES;
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-		xfs_trans_ijoin(tp, ip, lock_flags);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Only change the c/mtime if we are changing the size
@@ -334,8 +318,7 @@ xfs_setattr(
 			xfs_iflags_set(ip, XFS_ITRUNCATED);
 		}
 	} else if (tp) {
-		xfs_trans_ijoin(tp, ip, lock_flags);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	}
 
 	/*
@@ -470,17 +453,10 @@ xfs_setattr(
 			return XFS_ERROR(code);
 	}
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
-	    !(flags & XFS_ATTR_DMI)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, NULL, NULL,
-					0, 0, AT_DELAY_FLAG(flags));
-	}
 	return 0;
 
  abort_return:
 	commit_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
  error_return:
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
@@ -516,7 +492,7 @@ xfs_readlink_bmap(
 	int		error = 0;
 
 	error = xfs_bmapi(NULL, ip, 0, XFS_B_TO_FSB(mp, pathlen), 0, NULL, 0,
-			mval, &nmaps, NULL, NULL);
+			mval, &nmaps, NULL);
 	if (error)
 		goto out;
 
@@ -557,7 +533,7 @@ xfs_readlink(
 	int		pathlen;
 	int		error = 0;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_readlink(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -613,14 +589,14 @@ xfs_free_eofblocks(
 	 */
 	end_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)ip->i_size));
 	last_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp));
-	map_len = last_fsb - end_fsb;
-	if (map_len <= 0)
+	if (last_fsb <= end_fsb)
 		return 0;
+	map_len = last_fsb - end_fsb;
 
 	nimaps = 1;
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 	error = xfs_bmapi(NULL, ip, end_fsb, map_len, 0,
-			  NULL, 0, &imap, &nimaps, NULL, NULL);
+			  NULL, 0, &imap, &nimaps, NULL);
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
 	if (!error && (nimaps != 0) &&
@@ -675,10 +651,7 @@ xfs_free_eofblocks(
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip,
-				XFS_IOLOCK_EXCL |
-				XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		error = xfs_itruncate_finish(&tp, ip,
 					     ip->i_size,
@@ -750,8 +723,7 @@ xfs_inactive_symlink_rmt(
 	xfs_ilock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
 	size = (int)ip->i_d.di_size;
 	ip->i_d.di_size = 0;
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	/*
 	 * Find the block(s) so we can inval and unmap them.
@@ -761,7 +733,7 @@ xfs_inactive_symlink_rmt(
 	nmaps = ARRAY_SIZE(mval);
 	if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
 			XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
-			&free_list, NULL)))
+			&free_list)))
 		goto error0;
 	/*
 	 * Invalidate the block(s).
@@ -776,7 +748,7 @@ xfs_inactive_symlink_rmt(
 	 * Unmap the dead block(s) to the free_list.
 	 */
 	if ((error = xfs_bunmapi(tp, ip, 0, size, XFS_BMAPI_METADATA, nmaps,
-			&first_block, &free_list, NULL, &done)))
+			&first_block, &free_list, &done)))
 		goto error1;
 	ASSERT(done);
 	/*
@@ -795,8 +767,7 @@ xfs_inactive_symlink_rmt(
 	 * Mark it dirty so it will be logged and moved forward in the log as
 	 * part of every commit.
 	 */
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	/*
 	 * Get a new, empty transaction to return to our caller.
@@ -929,8 +900,7 @@ xfs_inactive_attrs(
 		goto error_cancel;
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_idestroy_fork(ip, XFS_ATTR_FORK);
 
 	ASSERT(ip->i_d.di_anextents == 0);
@@ -1035,8 +1005,6 @@ xfs_inactive(
 	int		error;
 	int		truncate;
 
-	xfs_itrace_entry(ip);
-
 	/*
 	 * If the inode is already free, then there can be nothing
 	 * to clean up here.
@@ -1060,9 +1028,6 @@ xfs_inactive(
 
 	mp = ip->i_mount;
 
-	if (ip->i_d.di_nlink == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_DESTROY))
-		XFS_SEND_DESTROY(mp, ip, DM_RIGHT_NULL);
-
 	error = 0;
 
 	/* If this is a read-only mount, don't do this (would generate I/O) */
@@ -1120,8 +1085,7 @@ xfs_inactive(
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * normally, we have to run xfs_itruncate_finish sync.
@@ -1154,8 +1118,7 @@ xfs_inactive(
 			return VN_INACTIVE_CACHE;
 		}
 
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	} else {
 		error = xfs_trans_reserve(tp, 0,
 					  XFS_IFREE_LOG_RES(mp),
@@ -1168,8 +1131,7 @@ xfs_inactive(
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	}
 
 	/*
@@ -1257,7 +1219,7 @@ xfs_lookup(
 	int			error;
 	uint			lock_mode;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_lookup(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
 		return XFS_ERROR(EIO);
@@ -1269,7 +1231,7 @@ xfs_lookup(
 	if (error)
 		goto out;
 
-	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0);
+	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp);
 	if (error)
 		goto out_free_name;
 
@@ -1309,21 +1271,11 @@ xfs_create(
 	uint			log_res;
 	uint			log_count;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_create(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_CREATE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_CREATE,
-				dp, DM_RIGHT_NULL, NULL,
-				DM_RIGHT_NULL, name->name, NULL,
-				mode, 0, 0);
-
-		if (error)
-			return error;
-	}
-
 	if (dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT)
 		prid = dp->i_d.di_projid;
 	else
@@ -1427,8 +1379,7 @@ xfs_create(
 	 * the transaction cancel unlocking dp so don't do it explicitly in the
 	 * error path.
 	 */
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
 	error = xfs_dir_createname(tp, dp, name, ip->i_ino,
@@ -1487,16 +1438,7 @@ xfs_create(
 	xfs_qm_dqrele(gdqp);
 
 	*ipp = ip;
-
-	/* Fallthrough to std_return with error = 0  */
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTCREATE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_POSTCREATE, dp, DM_RIGHT_NULL,
-				ip, DM_RIGHT_NULL, name->name, NULL, mode,
-				error, 0);
-	}
-
-	return error;
+	return 0;
 
  out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
@@ -1510,8 +1452,8 @@ xfs_create(
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-	goto std_return;
+ std_return:
+	return error;
 
  out_abort_rele:
 	/*
@@ -1726,20 +1668,11 @@ xfs_remove(
 	uint			resblks;
 	uint			log_count;
 
-	xfs_itrace_entry(dp);
-	xfs_itrace_entry(ip);
+	trace_xfs_remove(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, name->name, NULL,
-					ip->i_d.di_mode, 0, 0);
-		if (error)
-			return error;
-	}
-
 	error = xfs_qm_dqattach(dp, 0);
 	if (error)
 		goto std_return;
@@ -1782,15 +1715,8 @@ xfs_remove(
 
 	xfs_lock_two_inodes(dp, ip, XFS_ILOCK_EXCL);
 
-	/*
-	 * At this point, we've gotten both the directory and the entry
-	 * inodes locked.
-	 */
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
-
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * If we're removing a directory perform some additional validation.
@@ -1877,21 +1803,15 @@ xfs_remove(
 	if (!is_dir && link_zero && xfs_inode_is_filestream(ip))
 		xfs_filestream_deassociate(ip);
 
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL, name->name, NULL,
-				ip->i_d.di_mode, error, 0);
-	}
-
-	return error;
+	return 0;
 
  out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
 	cancel_flags |= XFS_TRANS_ABORT;
  out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -1909,25 +1829,13 @@ xfs_link(
 	int			committed;
 	int			resblks;
 
-	xfs_itrace_entry(tdp);
-	xfs_itrace_entry(sip);
+	trace_xfs_link(tdp, target_name);
 
 	ASSERT(!S_ISDIR(sip->i_d.di_mode));
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(tdp, DM_EVENT_LINK)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_LINK,
-					tdp, DM_RIGHT_NULL,
-					sip, DM_RIGHT_NULL,
-					target_name->name, NULL, 0, 0, 0);
-		if (error)
-			return error;
-	}
-
-	/* Return through std_return after this point. */
-
 	error = xfs_qm_dqattach(sip, 0);
 	if (error)
 		goto std_return;
@@ -1953,15 +1861,8 @@ xfs_link(
 
 	xfs_lock_two_inodes(sip, tdp, XFS_ILOCK_EXCL);
 
-	/*
-	 * Increment vnode ref counts since xfs_trans_commit &
-	 * xfs_trans_cancel will both unlock the inodes and
-	 * decrement the associated ref counts.
-	 */
-	IHOLD(sip);
-	IHOLD(tdp);
-	xfs_trans_ijoin(tp, sip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, tdp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, sip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, tdp, XFS_ILOCK_EXCL);
 
 	/*
 	 * If the source has too many links, we can't make any more to it.
@@ -2014,27 +1915,14 @@ xfs_link(
 		goto abort_return;
 	}
 
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	if (error)
-		goto std_return;
-
-	/* Fall through to std_return with error = 0. */
-std_return:
-	if (DM_EVENT_ENABLED(sip, DM_EVENT_POSTLINK)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTLINK,
-				tdp, DM_RIGHT_NULL,
-				sip, DM_RIGHT_NULL,
-				target_name->name, NULL, 0, error, 0);
-	}
-	return error;
+	return xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 
  abort_return:
 	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
-
  error_return:
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -2074,7 +1962,7 @@ xfs_symlink(
 	ip = NULL;
 	tp = NULL;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_symlink(dp, link_name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2086,17 +1974,6 @@ xfs_symlink(
 	if (pathlen >= MAXPATHLEN)      /* total string too long */
 		return XFS_ERROR(ENAMETOOLONG);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_SYMLINK)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_SYMLINK, dp,
-					DM_RIGHT_NULL, NULL, DM_RIGHT_NULL,
-					link_name->name,
-					(unsigned char *)target_path, 0, 0, 0);
-		if (error)
-			return error;
-	}
-
-	/* Return through std_return after this point. */
-
 	udqp = gdqp = NULL;
 	if (dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT)
 		prid = dp->i_d.di_projid;
@@ -2180,8 +2057,7 @@ xfs_symlink(
 	 * transaction cancel unlocking dp so don't do it explicitly in the
 	 * error path.
 	 */
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
 	/*
@@ -2215,7 +2091,7 @@ xfs_symlink(
 		error = xfs_bmapi(tp, ip, first_fsb, fs_blocks,
 				  XFS_BMAPI_WRITE | XFS_BMAPI_METADATA,
 				  &first_block, resblks, mval, &nmaps,
-				  &free_list, NULL);
+				  &free_list);
 		if (error) {
 			goto error1;
 		}
@@ -2278,21 +2154,8 @@ xfs_symlink(
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
 
-	/* Fall through to std_return with error = 0 or errno from
-	 * xfs_trans_commit	*/
-std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTSYMLINK)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTSYMLINK,
-					dp, DM_RIGHT_NULL,
-					error ? NULL : ip,
-					DM_RIGHT_NULL, link_name->name,
-					(unsigned char *)target_path,
-					0, error, 0);
-	}
-
-	if (!error)
-		*ipp = ip;
-	return error;
+	*ipp = ip;
+	return 0;
 
  error2:
 	IRELE(ip);
@@ -2306,8 +2169,8 @@ std_return:
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -2333,13 +2196,12 @@ xfs_set_dmattrs(
 		return error;
 	}
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 
 	ip->i_d.di_dmevmask = evmask;
 	ip->i_d.di_dmstate  = state;
 
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	IHOLD(ip);
 	error = xfs_trans_commit(tp, 0);
 
 	return error;
@@ -2390,7 +2252,7 @@ xfs_alloc_file_space(
 	int			committed;
 	int			error;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_alloc_file_space(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2412,25 +2274,9 @@ xfs_alloc_file_space(
 	startoffset_fsb	= XFS_B_TO_FSBT(mp, offset);
 	allocatesize_fsb = XFS_B_TO_FSB(mp, count);
 
-	/*	Generate a DMAPI event if needed.	*/
-	if (alloc_type != 0 && offset < ip->i_size &&
-			(attr_flags & XFS_ATTR_DMI) == 0  &&
-			DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
-		xfs_off_t           end_dmi_offset;
-
-		end_dmi_offset = offset+len;
-		if (end_dmi_offset > ip->i_size)
-			end_dmi_offset = ip->i_size;
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, offset,
-				      end_dmi_offset - offset, 0, NULL);
-		if (error)
-			return error;
-	}
-
 	/*
 	 * Allocate file space until done or until there is an error
 	 */
-retry:
 	while (allocatesize_fsb && !error) {
 		xfs_fileoff_t	s, e;
 
@@ -2488,8 +2334,7 @@ retry:
 		if (error)
 			goto error1;
 
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Issue the xfs_bmapi() call to allocate the blocks
@@ -2498,7 +2343,7 @@ retry:
 		error = xfs_bmapi(tp, ip, startoffset_fsb,
 				  allocatesize_fsb, bmapi_flag,
 				  &firstfsb, 0, imapp, &nimaps,
-				  &free_list, NULL);
+				  &free_list);
 		if (error) {
 			goto error0;
 		}
@@ -2527,17 +2372,6 @@ retry:
 		startoffset_fsb += allocated_fsb;
 		allocatesize_fsb -= allocated_fsb;
 	}
-dmapi_enospc_check:
-	if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE,
-				ip, DM_RIGHT_NULL,
-				ip, DM_RIGHT_NULL,
-				NULL, NULL, 0, 0, 0); /* Delay flag intentionally unused */
-		if (error == 0)
-			goto retry;	/* Maybe DMAPI app. has made space */
-		/* else fall through with error from XFS_SEND_DATA */
-	}
 
 	return error;
 
@@ -2548,7 +2382,7 @@ error0:	/* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
-	goto dmapi_enospc_check;
+	return error;
 }
 
 /*
@@ -2598,7 +2432,7 @@ xfs_zero_remaining_bytes(
 		offset_fsb = XFS_B_TO_FSBT(mp, offset);
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, offset_fsb, 1, 0,
-			NULL, 0, &imap, &nimap, NULL, NULL);
+			NULL, 0, &imap, &nimap, NULL);
 		if (error || nimap < 1)
 			break;
 		ASSERT(imap.br_blockcount >= 1);
@@ -2661,7 +2495,6 @@ xfs_free_file_space(
 {
 	int			committed;
 	int			done;
-	xfs_off_t		end_dmi_offset;
 	xfs_fileoff_t		endoffset_fsb;
 	int			error;
 	xfs_fsblock_t		firstfsb;
@@ -2680,7 +2513,7 @@ xfs_free_file_space(
 
 	mp = ip->i_mount;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_free_file_space(ip);
 
 	error = xfs_qm_dqattach(ip, 0);
 	if (error)
@@ -2691,19 +2524,7 @@ xfs_free_file_space(
 		return error;
 	rt = XFS_IS_REALTIME_INODE(ip);
 	startoffset_fsb	= XFS_B_TO_FSB(mp, offset);
-	end_dmi_offset = offset + len;
-	endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset);
-
-	if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
-		if (end_dmi_offset > ip->i_size)
-			end_dmi_offset = ip->i_size;
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip,
-				offset, end_dmi_offset - offset,
-				AT_DELAY_FLAG(attr_flags), NULL);
-		if (error)
-			return error;
-	}
+	endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);
 
 	if (attr_flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
@@ -2731,7 +2552,7 @@ xfs_free_file_space(
 	if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, startoffset_fsb,
-			1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
+			1, 0, NULL, 0, &imap, &nimap, NULL);
 		if (error)
 			goto out_unlock_iolock;
 		ASSERT(nimap == 0 || nimap == 1);
@@ -2746,7 +2567,7 @@ xfs_free_file_space(
 		}
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, endoffset_fsb - 1,
-			1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
+			1, 0, NULL, 0, &imap, &nimap, NULL);
 		if (error)
 			goto out_unlock_iolock;
 		ASSERT(nimap == 0 || nimap == 1);
@@ -2814,8 +2635,7 @@ xfs_free_file_space(
 		if (error)
 			goto error1;
 
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * issue the bunmapi() call to free the blocks
@@ -2823,7 +2643,7 @@ xfs_free_file_space(
 		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bunmapi(tp, ip, startoffset_fsb,
 				  endoffset_fsb - startoffset_fsb,
-				  0, 2, &firstfsb, &free_list, NULL, &done);
+				  0, 2, &firstfsb, &free_list, &done);
 		if (error) {
 			goto error0;
 		}
@@ -2883,8 +2703,6 @@ xfs_change_file_space(
 	xfs_trans_t	*tp;
 	struct iattr	iattr;
 
-	xfs_itrace_entry(ip);
-
 	if (!S_ISREG(ip->i_d.di_mode))
 		return XFS_ERROR(EINVAL);
 
@@ -2985,8 +2803,7 @@ xfs_change_file_space(
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	if ((attr_flags & XFS_ATTR_DMI) == 0) {
 		ip->i_d.di_mode &= ~S_ISUID;
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 5958d7845bd..17714beb868 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -212,7 +212,7 @@ char const *acpi_gbl_exception_names_env[] = {
 	"AE_NO_GLOBAL_LOCK",
 	"AE_ABORT_METHOD",
 	"AE_SAME_HANDLER",
-	"AE_WAKE_ONLY_GPE",
+	"AE_NO_HANDLER",
 	"AE_OWNER_ID_LIMIT"
 };
 
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 0e4ab1fe596..1371cc99739 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -69,6 +69,7 @@ extern acpi_name acpi_gbl_trace_method_name;
 extern u32 acpi_gbl_trace_flags;
 extern u8 acpi_gbl_enable_aml_debug_object;
 extern u8 acpi_gbl_copy_dsdt_locally;
+extern u8 acpi_gbl_truncate_io_addresses;
 
 extern u32 acpi_current_gpe_count;
 extern struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index bade172cad4..d55f4a7b824 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -663,10 +663,11 @@ typedef u32 acpi_event_status;
 #define ACPI_GPE_MAX                    0xFF
 #define ACPI_NUM_GPE                    256
 
-/* Actions for acpi_set_gpe */
+/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */
 
 #define ACPI_GPE_ENABLE                 0
 #define ACPI_GPE_DISABLE                1
+#define ACPI_GPE_COND_ENABLE            2
 
 /* gpe_types for acpi_enable_gpe and acpi_disable_gpe */
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index da565a48240..a68ca8a11a5 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -48,7 +48,7 @@ struct acpi_power_register {
 	u8 space_id;
 	u8 bit_width;
 	u8 bit_offset;
-	u8 reserved;
+	u8 access_size;
 	u64 address;
 } __attribute__ ((packed));
 
@@ -63,6 +63,7 @@ struct acpi_processor_cx {
 	u32 power;
 	u32 usage;
 	u64 time;
+	u8 bm_sts_skip;
 	char desc[ACPI_CX_DESC_LEN];
 };
 
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index 04f91c2d3f7..b5043a9890d 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -80,7 +80,7 @@ extern void setup_per_cpu_areas(void);
 
 #ifndef PER_CPU_BASE_SECTION
 #ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
+#define PER_CPU_BASE_SECTION ".data..percpu"
 #else
 #define PER_CPU_BASE_SECTION ".data"
 #endif
@@ -92,15 +92,15 @@ extern void setup_per_cpu_areas(void);
 #define PER_CPU_SHARED_ALIGNED_SECTION ""
 #define PER_CPU_ALIGNED_SECTION ""
 #else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
+#define PER_CPU_SHARED_ALIGNED_SECTION "..shared_aligned"
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
 #endif
-#define PER_CPU_FIRST_SECTION ".first"
+#define PER_CPU_FIRST_SECTION "..first"
 
 #else
 
 #define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
 #define PER_CPU_FIRST_SECTION ""
 
 #endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index ef779c6fc3d..030a954ed29 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -63,6 +63,12 @@
 /* Align . to a 8 byte boundary equals to maximum function alignment. */
 #define ALIGN_FUNCTION()  . = ALIGN(8)
 
+/*
+ * Align to a 32 byte boundary equal to the
+ * alignment gcc 4.5 uses for a struct
+ */
+#define STRUCT_ALIGN() . = ALIGN(32)
+
 /* The actual configuration determine if the init/exit sections
  * are handled as text/data or they can be discarded (which
  * often happens at runtime)
@@ -166,7 +172,11 @@
 	LIKELY_PROFILE()		       				\
 	BRANCH_PROFILE()						\
 	TRACE_PRINTKS()							\
+									\
+	STRUCT_ALIGN();							\
 	FTRACE_EVENTS()							\
+									\
+	STRUCT_ALIGN();							\
 	TRACE_SYSCALLS()
 
 /*
@@ -175,25 +185,25 @@
 #define NOSAVE_DATA							\
 	. = ALIGN(PAGE_SIZE);						\
 	VMLINUX_SYMBOL(__nosave_begin) = .;				\
-	*(.data.nosave)							\
+	*(.data..nosave)						\
 	. = ALIGN(PAGE_SIZE);						\
 	VMLINUX_SYMBOL(__nosave_end) = .;
 
 #define PAGE_ALIGNED_DATA(page_align)					\
 	. = ALIGN(page_align);						\
-	*(.data.page_aligned)
+	*(.data..page_aligned)
 
 #define READ_MOSTLY_DATA(align)						\
 	. = ALIGN(align);						\
-	*(.data.read_mostly)
+	*(.data..read_mostly)
 
 #define CACHELINE_ALIGNED_DATA(align)					\
 	. = ALIGN(align);						\
-	*(.data.cacheline_aligned)
+	*(.data..cacheline_aligned)
 
 #define INIT_TASK_DATA(align)						\
 	. = ALIGN(align);						\
-	*(.data.init_task)
+	*(.data..init_task)
 
 /*
  * Read only Data
@@ -435,7 +445,7 @@
  */
 #define INIT_TASK_DATA_SECTION(align)					\
 	. = ALIGN(align);						\
-	.data.init_task : {						\
+	.data..init_task :  AT(ADDR(.data..init_task) - LOAD_OFFSET) {	\
 		INIT_TASK_DATA(align)					\
 	}
 
@@ -499,7 +509,7 @@
 #define BSS(bss_align)							\
 	. = ALIGN(bss_align);						\
 	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
-		*(.bss.page_aligned)					\
+		*(.bss..page_aligned)					\
 		*(.dynbss)						\
 		*(.bss)							\
 		*(COMMON)						\
@@ -666,16 +676,16 @@
  */
 #define PERCPU_VADDR(vaddr, phdr)					\
 	VMLINUX_SYMBOL(__per_cpu_load) = .;				\
-	.data.percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load)		\
+	.data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load)		\
 				- LOAD_OFFSET) {			\
 		VMLINUX_SYMBOL(__per_cpu_start) = .;			\
-		*(.data.percpu.first)					\
-		*(.data.percpu.page_aligned)				\
-		*(.data.percpu)						\
-		*(.data.percpu.shared_aligned)				\
+		*(.data..percpu..first)					\
+		*(.data..percpu..page_aligned)				\
+		*(.data..percpu)					\
+		*(.data..percpu..shared_aligned)			\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\
 	} phdr								\
-	. = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data.percpu);
+	. = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu);
 
 /**
  * PERCPU - define output section for percpu area, simple version
@@ -687,18 +697,18 @@
  *
  * This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
  * that __per_cpu_load is defined as a relative symbol against
- * .data.percpu which is required for relocatable x86_32
+ * .data..percpu which is required for relocatable x86_32
  * configuration.
  */
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
-	.data.percpu	: AT(ADDR(.data.percpu) - LOAD_OFFSET) {	\
+	.data..percpu	: AT(ADDR(.data..percpu) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__per_cpu_load) = .;			\
 		VMLINUX_SYMBOL(__per_cpu_start) = .;			\
-		*(.data.percpu.first)					\
-		*(.data.percpu.page_aligned)				\
-		*(.data.percpu)						\
-		*(.data.percpu.shared_aligned)				\
+		*(.data..percpu..first)					\
+		*(.data..percpu..page_aligned)				\
+		*(.data..percpu)					\
+		*(.data..percpu..shared_aligned)			\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\
 	}
 
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index dc5873c21e4..1121f7799c6 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -130,4 +130,7 @@ extern int drm_helper_resume_force_mode(struct drm_device *dev);
 extern void drm_kms_helper_poll_init(struct drm_device *dev);
 extern void drm_kms_helper_poll_fini(struct drm_device *dev);
 extern void drm_helper_hpd_irq_event(struct drm_device *dev);
+
+extern void drm_kms_helper_poll_disable(struct drm_device *dev);
+extern void drm_kms_helper_poll_enable(struct drm_device *dev);
 #endif
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index b64a8d7cdf6..8f8b072c4c7 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -33,6 +33,15 @@
  * subject to backwards-compatibility constraints.
  */
 
+#ifdef __KERNEL__
+/* For use by IPS driver */
+extern unsigned long i915_read_mch_val(void);
+extern bool i915_gpu_raise(void);
+extern bool i915_gpu_lower(void);
+extern bool i915_gpu_busy(void);
+extern bool i915_gpu_turbo_disable(void);
+#endif
+
 /* Each region is a minimum of 16k, and there are at most 255 of them.
  */
 #define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
@@ -275,6 +284,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_OVERLAY           7
 #define I915_PARAM_HAS_PAGEFLIPPING	 8
 #define I915_PARAM_HAS_EXECBUF2          9
+#define I915_PARAM_HAS_BSD		 10
 
 typedef struct drm_i915_getparam {
 	int param;
@@ -616,7 +626,9 @@ struct drm_i915_gem_execbuffer2 {
 	__u32 num_cliprects;
 	/** This is a struct drm_clip_rect *cliprects */
 	__u64 cliprects_ptr;
-	__u64 flags; /* currently unused */
+#define I915_EXEC_RENDER                 (1<<0)
+#define I915_EXEC_BSD                    (1<<1)
+	__u64 flags;
 	__u64 rsvd1;
 	__u64 rsvd2;
 };
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
index a6a9f4af5eb..fe917dee723 100644
--- a/include/drm/nouveau_drm.h
+++ b/include/drm/nouveau_drm.h
@@ -79,6 +79,7 @@ struct drm_nouveau_gpuobj_free {
 #define NOUVEAU_GETPARAM_CHIPSET_ID      11
 #define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
 #define NOUVEAU_GETPARAM_GRAPH_UNITS     13
+#define NOUVEAU_GETPARAM_PTIMER_TIME     14
 struct drm_nouveau_getparam {
 	uint64_t param;
 	uint64_t value;
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 3ff9fc071df..5347063e9d5 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -903,6 +903,7 @@ struct drm_radeon_cs {
 #define RADEON_INFO_NUM_Z_PIPES 	0x02
 #define RADEON_INFO_ACCEL_WORKING	0x03
 #define RADEON_INFO_CRTC_FROM_ID	0x04
+#define RADEON_INFO_ACCEL_WORKING2	0x05
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/include/drm/ttm/ttm_page_alloc.h b/include/drm/ttm/ttm_page_alloc.h
index 8bb4de567b2..116821448c3 100644
--- a/include/drm/ttm/ttm_page_alloc.h
+++ b/include/drm/ttm/ttm_page_alloc.h
@@ -56,10 +56,6 @@ void ttm_put_pages(struct list_head *pages,
 		   enum ttm_caching_state cstate);
 /**
  * Initialize pool allocator.
- *
- * Pool allocator is internaly reference counted so it can be initialized
- * multiple times but ttm_page_alloc_fini has to be called same number of
- * times.
  */
 int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages);
 /**
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index c7645f480d1..4d0842391ed 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -50,6 +50,8 @@
 #define DRM_VMW_EXECBUF              12
 #define DRM_VMW_FIFO_DEBUG           13
 #define DRM_VMW_FENCE_WAIT           14
+/* guarded by minor version >= 2 */
+#define DRM_VMW_UPDATE_LAYOUT        15
 
 
 /*************************************************************************/
@@ -585,4 +587,28 @@ struct drm_vmw_stream_arg {
  * sure that the stream has been stopped.
  */
 
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the prefered modes and connection status for connectors. The
+ * command conisits of one drm_vmw_update_layout_arg pointing out a array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active
+ * @rects: pointer to array of drm_vmw_rect
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+
+struct drm_vmw_update_layout_arg {
+	uint32_t num_outputs;
+	uint32_t pad64;
+	uint64_t rects;
+};
+
 #endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 224a38c960d..ccf94dc5acd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -253,7 +253,7 @@ int acpi_resources_are_enforced(void);
 #ifdef CONFIG_PM_SLEEP
 void __init acpi_no_s4_hw_signature(void);
 void __init acpi_old_suspend_ordering(void);
-void __init acpi_s4_no_nvs(void);
+void __init acpi_nvs_nosave(void);
 #endif /* CONFIG_PM_SLEEP */
 
 struct acpi_osc_context {
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 9101ed64f80..09ea4a1e950 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -79,7 +79,6 @@ struct agp_memory {
 	u32 physical;
 	bool is_bound;
 	bool is_flushed;
-	bool vmalloc_flag;
 	/* list of agp_memory mapped to the aperture */
 	struct list_head mapped_list;
 	/* DMA-mapped addresses */
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 8b103860783..b0c17401243 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -14,14 +14,19 @@
 #ifndef ASMARM_AMBA_H
 #define ASMARM_AMBA_H
 
+#include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/resource.h>
 
 #define AMBA_NR_IRQS	2
 
+struct clk;
+
 struct amba_device {
 	struct device		dev;
 	struct resource		res;
+	struct clk		*pclk;
 	u64			dma_mask;
 	unsigned int		periphid;
 	unsigned int		irq[AMBA_NR_IRQS];
@@ -59,6 +64,12 @@ struct amba_device *amba_find_device(const char *, struct device *, unsigned int
 int amba_request_regions(struct amba_device *, const char *);
 void amba_release_regions(struct amba_device *);
 
+#define amba_pclk_enable(d)	\
+	(IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
+
+#define amba_pclk_disable(d)	\
+	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
+
 #define amba_config(d)	(((d)->periphid >> 24) & 0xff)
 #define amba_rev(d)	(((d)->periphid >> 20) & 0x0f)
 #define amba_manf(d)	(((d)->periphid >> 12) & 0xff)
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 7e466fe7202..ca84ce70d5d 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -15,9 +15,10 @@
  * @ocr_mask: available voltages on the 4 pins from the block, this
  * is ignored if a regulator is used, see the MMC_VDD_* masks in
  * mmc/host.h
- * @translate_vdd: a callback function to translate a MMC_VDD_*
- * mask into a value to be binary or:ed and written into the
- * MMCIPWR register of the block
+ * @vdd_handler: a callback function to translate a MMC_VDD_*
+ * mask into a value to be binary (or set some other custom bits
+ * in MMCIPWR) or:ed and written into the MMCIPWR register of the
+ * block.  May also control external power based on the power_mode.
  * @status: if no GPIO read function was given to the block in
  * gpio_wp (below) this function will be called to determine
  * whether a card is present in the MMC slot or not
@@ -29,7 +30,8 @@
 struct mmci_platform_data {
 	unsigned int f_max;
 	unsigned int ocr_mask;
-	u32 (*translate_vdd)(struct device *, unsigned int);
+	u32 (*vdd_handler)(struct device *, unsigned int vdd,
+			   unsigned char power_mode);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 5a5a7fd6249..e1b634b635f 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -38,10 +38,12 @@
 #define UART01x_FR		0x18	/* Flag register (Read only). */
 #define UART010_IIR		0x1C	/* Interrupt indentification register (Read). */
 #define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
+#define ST_UART011_LCRH_RX	0x1C    /* Rx line control register. */
 #define UART01x_ILPR		0x20	/* IrDA low power counter register. */
 #define UART011_IBRD		0x24	/* Integer baud rate divisor register. */
 #define UART011_FBRD		0x28	/* Fractional baud rate divisor register. */
 #define UART011_LCRH		0x2c	/* Line control register. */
+#define ST_UART011_LCRH_TX	0x2c    /* Tx Line control register. */
 #define UART011_CR		0x30	/* Control register. */
 #define UART011_IFLS		0x34	/* Interrupt fifo level select. */
 #define UART011_IMSC		0x38	/* Interrupt mask. */
@@ -84,6 +86,7 @@
 #define UART010_CR_TIE 		0x0020
 #define UART010_CR_RIE 		0x0010
 #define UART010_CR_MSIE		0x0008
+#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
 #define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
 #define UART01x_CR_SIREN	0x0002	/* SIR enable */
 #define UART01x_CR_UARTEN	0x0001	/* UART enable */
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index e6e0cb5437e..e9aec0d099d 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -82,8 +82,6 @@ struct backing_dev_info {
 	struct bdi_writeback wb;  /* default writeback info for this bdi */
 	spinlock_t wb_lock;	  /* protects update side of wb_list */
 	struct list_head wb_list; /* the flusher threads hanging off this bdi */
-	unsigned long wb_mask;	  /* bitmask of registered tasks */
-	unsigned int wb_cnt;	  /* number of registered tasks */
 
 	struct list_head work_list;
 
@@ -105,8 +103,8 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
 int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
 void bdi_unregister(struct backing_dev_info *bdi);
 int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
-				long nr_pages, int sb_locked);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_background_writeback(struct backing_dev_info *bdi);
 int bdi_writeback_task(struct bdi_writeback *wb);
 int bdi_has_dirty_io(struct backing_dev_info *bdi);
 void bdi_arm_supers_timer(void);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8b7f5e0914a..09a840264d6 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1211,14 +1211,23 @@ struct work_struct;
 int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
 
 #ifdef CONFIG_BLK_CGROUP
+/*
+ * This should not be using sched_clock(). A real patch is in progress
+ * to fix this up, until that is in place we need to disable preemption
+ * around sched_clock() in this function and set_io_start_time_ns().
+ */
 static inline void set_start_time_ns(struct request *req)
 {
+	preempt_disable();
 	req->start_time_ns = sched_clock();
+	preempt_enable();
 }
 
 static inline void set_io_start_time_ns(struct request *req)
 {
+	preempt_disable();
 	req->io_start_time_ns = sched_clock();
+	preempt_enable();
 }
 
 static inline uint64_t rq_start_time_ns(struct request *req)
diff --git a/include/linux/cache.h b/include/linux/cache.h
index 97e24881c4c..4c570653ab8 100644
--- a/include/linux/cache.h
+++ b/include/linux/cache.h
@@ -31,7 +31,7 @@
 #ifndef __cacheline_aligned
 #define __cacheline_aligned					\
   __attribute__((__aligned__(SMP_CACHE_BYTES),			\
-		 __section__(".data.cacheline_aligned")))
+		 __section__(".data..cacheline_aligned")))
 #endif /* __cacheline_aligned */
 
 #ifndef __cacheline_aligned_in_smp
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 39e5ff512fb..90012b9ddbf 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -49,9 +49,6 @@ typedef struct __user_cap_data_struct {
 } __user *cap_user_data_t;
 
 
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
 #define VFS_CAP_REVISION_MASK	0xFF000000
 #define VFS_CAP_REVISION_SHIFT	24
 #define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e0aa067d1b1..ed3e92e41c6 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -525,13 +525,21 @@ static inline struct cgroup_subsys_state *cgroup_subsys_state(
 	return cgrp->subsys[subsys_id];
 }
 
-static inline struct cgroup_subsys_state *task_subsys_state(
-	struct task_struct *task, int subsys_id)
+/*
+ * function to get the cgroup_subsys_state which allows for extra
+ * rcu_dereference_check() conditions, such as locks used during the
+ * cgroup_subsys::attach() methods.
+ */
+#define task_subsys_state_check(task, subsys_id, __c)			\
+	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
+			      rcu_read_lock_held() ||			\
+			      lockdep_is_held(&task->alloc_lock) ||	\
+			      cgroup_lock_is_held() || (__c))
+
+static inline struct cgroup_subsys_state *
+task_subsys_state(struct task_struct *task, int subsys_id)
 {
-	return rcu_dereference_check(task->cgroups->subsys[subsys_id],
-				     rcu_read_lock_held() ||
-				     lockdep_is_held(&task->alloc_lock) ||
-				     cgroup_lock_is_held());
+	return task_subsys_state_check(task, subsys_id, false);
 }
 
 static inline struct cgroup* task_cgroup(struct task_struct *task,
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 73dcf804bc9..0da5b187f12 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -58,8 +58,12 @@
  * naked functions because then mcount is called without stack and frame pointer
  * being set up and there is no chance to restore the lr register to the value
  * before mcount was called.
+ *
+ * The asm() bodies of naked functions often depend on standard calling conventions,
+ * therefore they must be noinline and noclone.  GCC 4.[56] currently fail to enforce
+ * this, so we must do so ourselves.  See GCC PR44290.
  */
-#define __naked				__attribute__((naked)) notrace
+#define __naked				__attribute__((naked)) noinline __noclone notrace
 
 #define __noreturn			__attribute__((noreturn))
 
@@ -85,3 +89,7 @@
 #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
 #define gcc_header(x) _gcc_header(x)
 #include gcc_header(__GNUC__)
+
+#if !defined(__noclone)
+#define __noclone	/* not needed */
+#endif
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 94dea3ffbfa..fcfa5b9a431 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -48,6 +48,10 @@
  * unreleased.  Really, we need to have autoconf for the kernel.
  */
 #define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone	__attribute__((__noclone__))
+
 #endif
 
 #endif
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9f15150ce8d..c3e9de8321c 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -196,11 +196,6 @@ extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy,
 int cpufreq_register_governor(struct cpufreq_governor *governor);
 void cpufreq_unregister_governor(struct cpufreq_governor *governor);
 
-int lock_policy_rwsem_read(int cpu);
-int lock_policy_rwsem_write(int cpu);
-void unlock_policy_rwsem_read(int cpu);
-void unlock_policy_rwsem_write(int cpu);
-
 
 /*********************************************************************
  *                      CPUFREQ DRIVER INTERFACE                     *
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 75c0fa88130..4d2c39573f3 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -153,6 +153,7 @@ struct cred {
 extern void __put_cred(struct cred *);
 extern void exit_creds(struct task_struct *);
 extern int copy_creds(struct task_struct *, unsigned long);
+extern const struct cred *get_task_cred(struct task_struct *);
 extern struct cred *cred_alloc_blank(void);
 extern struct cred *prepare_creds(void);
 extern struct cred *prepare_exec_creds(void);
@@ -273,33 +274,18 @@ static inline void put_cred(const struct cred *_cred)
  * @task: The task to query
  *
  * Access the objective credentials of a task.  The caller must hold the RCU
- * readlock.
+ * readlock or the task must be dead and unable to change its own credentials.
  *
- * The caller must make sure task doesn't go away, either by holding a ref on
- * task or by holding tasklist_lock to prevent it from being unlinked.
+ * The result of this function should not be passed directly to get_cred();
+ * rather get_task_cred() should be used instead.
  */
-#define __task_cred(task) \
-	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_tasklist_lock_is_held())))
-
-/**
- * get_task_cred - Get another task's objective credentials
- * @task: The task to query
- *
- * Get the objective credentials of a task, pinning them so that they can't go
- * away.  Accessing a task's credentials directly is not permitted.
- *
- * The caller must make sure task doesn't go away, either by holding a ref on
- * task or by holding tasklist_lock to prevent it from being unlinked.
- */
-#define get_task_cred(task)				\
-({							\
-	struct cred *__cred;				\
-	rcu_read_lock();				\
-	__cred = (struct cred *) __task_cred((task));	\
-	get_cred(__cred);				\
-	rcu_read_unlock();				\
-	__cred;						\
-})
+#define __task_cred(task)						\
+	({								\
+		const struct task_struct *__t = (task);			\
+		rcu_dereference_check(__t->real_cred,			\
+				      rcu_read_lock_held() ||		\
+				      task_is_dead(__t));		\
+	})
 
 /**
  * get_current_cred - Get the current task's subjective credentials
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index 68530521ad0..b8d2516668a 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
 
 
 extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.8rc1"
+#define REL_VERSION "8.3.8"
 #define API_VERSION 88
 #define PRO_VERSION_MIN 86
 #define PRO_VERSION_MAX 94
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index b6cb5425cde..493a2bf85f6 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -62,6 +62,7 @@ typedef enum fe_caps {
 	FE_CAN_8VSB			= 0x200000,
 	FE_CAN_16VSB			= 0x400000,
 	FE_HAS_EXTENDED_CAPS		= 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+	FE_CAN_TURBO_FEC		= 0x8000000,  /* frontend supports "turbo fec modulation" */
 	FE_CAN_2G_MODULATION		= 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
 	FE_NEEDS_BENDING		= 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
 	FE_CAN_RECOVER			= 0x40000000, /* frontend can recover from a cable unplug automatically */
diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
index 540b0583d9f..5a7546c1268 100644
--- a/include/linux/dvb/version.h
+++ b/include/linux/dvb/version.h
@@ -24,6 +24,6 @@
 #define _DVBVERSION_H_
 
 #define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 1
+#define DVB_API_VERSION_MINOR 2
 
 #endif /*_DVBVERSION_H_*/
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index b3cd4de9432..52c0da4bdd1 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -40,7 +40,7 @@ int ddebug_add_module(struct _ddebug *tab, unsigned int n,
 				const char *modname);
 
 #if defined(CONFIG_DYNAMIC_DEBUG)
-extern int ddebug_remove_module(char *mod_name);
+extern int ddebug_remove_module(const char *mod_name);
 
 #define __dynamic_dbg_enabled(dd)  ({	     \
 	int __ret = 0;							     \
@@ -73,7 +73,7 @@ extern int ddebug_remove_module(char *mod_name);
 
 #else
 
-static inline int ddebug_remove_module(char *mod)
+static inline int ddebug_remove_module(const char *mod)
 {
 	return 0;
 }
diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h
new file mode 100644
index 00000000000..f974fc03536
--- /dev/null
+++ b/include/linux/edac_mce.h
@@ -0,0 +1,31 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#if defined(CONFIG_EDAC_MCE) || \
+			(defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
+
+#include <asm/mce.h>
+#include <linux/list.h>
+
+struct edac_mce {
+	struct list_head list;
+
+	void *priv;
+	int (*check_error)(void *priv, struct mce *mce);
+};
+
+int edac_mce_register(struct edac_mce *edac_mce);
+void edac_mce_unregister(struct edac_mce *edac_mce);
+int edac_mce_parse(struct mce *mce);
+
+#else
+#define edac_mce_parse(mce) (0)
+#endif
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 907ace3a64c..e7445df44d6 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -786,8 +786,6 @@ struct fb_tile_ops {
 #define FBINFO_MISC_USEREVENT          0x10000 /* event request
 						  from userspace */
 #define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
-#define FBINFO_MISC_FIRMWARE           0x40000 /* a replaceable firmware
-						  inited framebuffer */
 
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
@@ -801,6 +799,8 @@ struct fb_tile_ops {
  */
 #define FBINFO_MISC_ALWAYS_SETPAR   0x40000
 
+/* where the fb is a firmware driver, and can be replaced with a proper one */
+#define FBINFO_MISC_FIRMWARE        0x80000
 /*
  * Host and GPU endianness differ.
  */
@@ -873,6 +873,8 @@ struct fb_info {
 static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
 	struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
 			+ max_num * sizeof(struct aperture), GFP_KERNEL);
+	if (!a)
+		return NULL;
 	a->count = max_num;
 	return a;
 }
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index 013dc529e95..d147461bc27 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -61,7 +61,8 @@ struct files_struct {
 	(rcu_dereference_check((fdtfd), \
 			       rcu_read_lock_held() || \
 			       lockdep_is_held(&(files)->file_lock) || \
-			       atomic_read(&(files)->count) == 1))
+			       atomic_read(&(files)->count) == 1 || \
+			       rcu_my_thread_group_empty()))
 
 #define files_fdtable(files) \
 		(rcu_dereference_check_fdtable((files), (files)->fdt))
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3428393942a..e5106e49bd2 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -53,6 +53,7 @@ struct inodes_stat_t {
 #define MAY_APPEND 8
 #define MAY_ACCESS 16
 #define MAY_OPEN 32
+#define MAY_CHDIR 64
 
 /*
  * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
@@ -415,7 +416,8 @@ struct buffer_head;
 typedef int (get_block_t)(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create);
 typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
-			ssize_t bytes, void *private);
+			ssize_t bytes, void *private, int ret,
+			bool is_async);
 
 /*
  * Attribute flags.  These should be or-ed together to figure out what
@@ -1783,6 +1785,19 @@ extern int get_sb_pseudo(struct file_system_type *, char *,
 	struct vfsmount *mnt);
 extern void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
 
+static inline void sb_mark_dirty(struct super_block *sb)
+{
+	sb->s_dirt = 1;
+}
+static inline void sb_mark_clean(struct super_block *sb)
+{
+	sb->s_dirt = 0;
+}
+static inline int sb_is_dirty(struct super_block *sb)
+{
+	return sb->s_dirt;
+}
+
 /* Alas, no aliases. Too much hassle with bringing module.h everywhere */
 #define fops_get(fops) \
 	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
@@ -2388,7 +2403,7 @@ extern const struct file_operations simple_dir_operations;
 extern const struct inode_operations simple_dir_inode_operations;
 struct tree_descr { char *name; const struct file_operations *ops; int mode; };
 struct dentry *d_alloc_name(struct dentry *, const char *);
-extern int simple_fill_super(struct super_block *, int, struct tree_descr *);
+extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
 extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
 extern void simple_release_fs(struct vfsmount **mount, int *count);
 
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index 02c9af37474..269181b8f62 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -78,6 +78,40 @@
 
 #define ADP5588_KEYMAPSIZE	80
 
+#define GPI_PIN_ROW0 97
+#define GPI_PIN_ROW1 98
+#define GPI_PIN_ROW2 99
+#define GPI_PIN_ROW3 100
+#define GPI_PIN_ROW4 101
+#define GPI_PIN_ROW5 102
+#define GPI_PIN_ROW6 103
+#define GPI_PIN_ROW7 104
+#define GPI_PIN_COL0 105
+#define GPI_PIN_COL1 106
+#define GPI_PIN_COL2 107
+#define GPI_PIN_COL3 108
+#define GPI_PIN_COL4 109
+#define GPI_PIN_COL5 110
+#define GPI_PIN_COL6 111
+#define GPI_PIN_COL7 112
+#define GPI_PIN_COL8 113
+#define GPI_PIN_COL9 114
+
+#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
+#define GPI_PIN_ROW_END GPI_PIN_ROW7
+#define GPI_PIN_COL_BASE GPI_PIN_COL0
+#define GPI_PIN_COL_END GPI_PIN_COL9
+
+#define GPI_PIN_BASE GPI_PIN_ROW_BASE
+#define GPI_PIN_END GPI_PIN_COL_END
+
+#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
+
+struct adp5588_gpi_map {
+	unsigned short pin;
+	unsigned short sw_evt;
+};
+
 struct adp5588_kpad_platform_data {
 	int rows;			/* Number of rows */
 	int cols;			/* Number of columns */
@@ -87,6 +121,9 @@ struct adp5588_kpad_platform_data {
 	unsigned en_keylock:1;		/* Enable Key Lock feature */
 	unsigned short unlock_key1;	/* Unlock Key 1 */
 	unsigned short unlock_key2;	/* Unlock Key 2 */
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	const struct adp5588_gpio_platform_data *gpio_data;
 };
 
 struct adp5588_gpio_platform_data {
diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h
new file mode 100644
index 00000000000..725ae7c313f
--- /dev/null
+++ b/include/linux/i2c/mcs.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS_H
+#define __LINUX_MCS_H
+
+#define MCS_KEY_MAP(v, c)	((((v) & 0xff) << 16) | ((c) & 0xffff))
+#define MCS_KEY_VAL(v)		(((v) >> 16) & 0xff)
+#define MCS_KEY_CODE(v)		((v) & 0xffff)
+
+struct mcs_platform_data {
+	void (*cfg_pin)(void);
+
+	/* touchscreen */
+	unsigned int x_size;
+	unsigned int y_size;
+
+	/* touchkey */
+	const u32 *keymap;
+	unsigned int keymap_size;
+	unsigned int key_maxval;
+	bool no_autorepeat;
+};
+
+#endif	/* __LINUX_MCS_H */
diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h
deleted file mode 100644
index 5a117b5ca15..00000000000
--- a/include/linux/i2c/mcs5000_ts.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * mcs5000_ts.h
- *
- * Copyright (C) 2009 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MCS5000_TS_H
-#define __LINUX_MCS5000_TS_H
-
-/* platform data for the MELFAS MCS-5000 touchscreen driver */
-struct mcs5000_ts_platform_data {
-	void (*cfg_pin)(void);
-	int x_size;
-	int y_size;
-};
-
-#endif	/* __LINUX_MCS5000_TS_H */
diff --git a/include/linux/i2c/qt602240_ts.h b/include/linux/i2c/qt602240_ts.h
new file mode 100644
index 00000000000..c5033e10109
--- /dev/null
+++ b/include/linux/i2c/qt602240_ts.h
@@ -0,0 +1,38 @@
+/*
+ * AT42QT602240/ATMXT224 Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_QT602240_TS_H
+#define __LINUX_QT602240_TS_H
+
+/* Orient */
+#define QT602240_NORMAL			0x0
+#define QT602240_DIAGONAL		0x1
+#define QT602240_HORIZONTAL_FLIP	0x2
+#define QT602240_ROTATED_90_COUNTER	0x3
+#define QT602240_VERTICAL_FLIP		0x4
+#define QT602240_ROTATED_90		0x5
+#define QT602240_ROTATED_180		0x6
+#define QT602240_DIAGONAL_COUNTER	0x7
+
+/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */
+struct qt602240_platform_data {
+	unsigned int x_line;
+	unsigned int y_line;
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int blen;
+	unsigned int threshold;
+	unsigned int voltage;
+	unsigned char orient;
+};
+
+#endif /* __LINUX_QT602240_TS_H */
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 9bf6870ee5f..a986ff58894 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -46,31 +46,31 @@ int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
 
 #else
 
-void i8042_lock_chip(void)
+static inline void i8042_lock_chip(void)
 {
 }
 
-void i8042_unlock_chip(void)
+static inline void i8042_unlock_chip(void)
 {
 }
 
-int i8042_command(unsigned char *param, int command)
+static inline int i8042_command(unsigned char *param, int command)
 {
 	return -ENODEV;
 }
 
-bool i8042_check_port_owner(const struct serio *serio)
+static inline bool i8042_check_port_owner(const struct serio *serio)
 {
 	return false;
 }
 
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio))
 {
 	return -ENODEV;
 }
 
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
 				       struct serio *serio))
 {
 	return -ENODEV;
diff --git a/include/linux/init.h b/include/linux/init.h
index ab1d31f9352..de994304e0b 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -301,7 +301,7 @@ void __init parse_early_options(char *cmdline);
 #endif
 
 /* Data marked not to be saved by software suspend */
-#define __nosavedata __section(.data.nosave)
+#define __nosavedata __section(.data..nosave)
 
 /* This means "can be init if no module support, otherwise module load
    may call it." */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 2beaa13492b..1f43fa56f60 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -183,7 +183,7 @@ extern struct cred init_cred;
 }
 
 /* Attach to the init_task data structure for proper alignment */
-#define __init_task_data __attribute__((__section__(".data.init_task")))
+#define __init_task_data __attribute__((__section__(".data..init_task")))
 
 
 #endif
diff --git a/include/linux/input.h b/include/linux/input.h
index 6fcc9101bee..339d043ccb5 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -691,9 +691,12 @@ struct input_absinfo {
 #define ABS_TILT_X		0x1a
 #define ABS_TILT_Y		0x1b
 #define ABS_TOOL_WIDTH		0x1c
+
 #define ABS_VOLUME		0x20
+
 #define ABS_MISC		0x28
 
+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
 #define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
 #define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
 #define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
@@ -706,6 +709,12 @@ struct input_absinfo {
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
 
+#ifdef __KERNEL__
+/* Implementation details, userspace should not care about these */
+#define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
+#define ABS_MT_LAST		ABS_MT_PRESSURE
+#endif
+
 #define ABS_MAX			0x3f
 #define ABS_CNT			(ABS_MAX+1)
 
@@ -1048,6 +1057,14 @@ struct ff_effect {
 #include <linux/mod_devicetable.h>
 
 /**
+ * struct input_mt_slot - represents the state of an input MT slot
+ * @abs: holds current values of ABS_MT axes for this slot
+ */
+struct input_mt_slot {
+	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
+};
+
+/**
  * struct input_dev - represents an input device
  * @name: name of the device
  * @phys: physical path to the device in the system hierarchy
@@ -1063,6 +1080,10 @@ struct ff_effect {
  * @sndbit: bitmap of sound effects supported by the device
  * @ffbit: bitmap of force feedback effects supported by the device
  * @swbit: bitmap of switches present on the device
+ * @hint_events_per_packet: average number of events generated by the
+ *	device in a packet (between EV_SYN/SYN_REPORT events). Used by
+ *	event handlers to estimate size of the buffer needed to hold
+ *	events.
  * @keycodemax: size of keycode table
  * @keycodesize: size of elements in keycode table
  * @keycode: map of scancodes to keycodes for this device
@@ -1078,9 +1099,12 @@ struct ff_effect {
  * @repeat_key: stores key code of the last key pressed; used to implement
  *	software autorepeat
  * @timer: timer for software autorepeat
- * @sync: set to 1 when there were no new events since last EV_SYNC
  * @abs: current values for reports from absolute axes
  * @rep: current values for autorepeat parameters (delay, rate)
+ * @mt: pointer to array of struct input_mt_slot holding current values
+ *	of tracked contacts
+ * @mtsize: number of MT slots the device uses
+ * @slot: MT slot currently being transmitted
  * @key: reflects current state of device's keys/buttons
  * @led: reflects current state of device's LEDs
  * @snd: reflects current state of sound effects
@@ -1119,6 +1143,7 @@ struct ff_effect {
  *	last user closes the device
  * @going_away: marks devices that are in a middle of unregistering and
  *	causes input_open_device*() fail with -ENODEV.
+ * @sync: set to %true when there were no new events since last EV_SYN
  * @dev: driver model's view of this device
  * @h_list: list of input handles associated with the device. When
  *	accessing the list dev->mutex must be held
@@ -1140,6 +1165,8 @@ struct input_dev {
 	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
 	unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
 
+	unsigned int hint_events_per_packet;
+
 	unsigned int keycodemax;
 	unsigned int keycodesize;
 	void *keycode;
@@ -1153,11 +1180,13 @@ struct input_dev {
 	unsigned int repeat_key;
 	struct timer_list timer;
 
-	int sync;
-
 	int abs[ABS_CNT];
 	int rep[REP_MAX + 1];
 
+	struct input_mt_slot *mt;
+	int mtsize;
+	int slot;
+
 	unsigned long key[BITS_TO_LONGS(KEY_CNT)];
 	unsigned long led[BITS_TO_LONGS(LED_CNT)];
 	unsigned long snd[BITS_TO_LONGS(SND_CNT)];
@@ -1182,6 +1211,8 @@ struct input_dev {
 	unsigned int users;
 	bool going_away;
 
+	bool sync;
+
 	struct device dev;
 
 	struct list_head	h_list;
@@ -1406,8 +1437,28 @@ static inline void input_mt_sync(struct input_dev *dev)
 	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
 }
 
+static inline void input_mt_slot(struct input_dev *dev, int slot)
+{
+	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
+}
+
 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
 
+/**
+ * input_set_events_per_packet - tell handlers about the driver event rate
+ * @dev: the input device used by the driver
+ * @n_events: the average number of events between calls to input_sync()
+ *
+ * If the event rate sent from a device is unusually large, use this
+ * function to set the expected event rate. This will allow handlers
+ * to set up an appropriate buffer size for the event stream, in order
+ * to minimize information loss.
+ */
+static inline void input_set_events_per_packet(struct input_dev *dev, int n_events)
+{
+	dev->hint_events_per_packet = n_events;
+}
+
 static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
 {
 	dev->absmin[axis] = min;
@@ -1485,5 +1536,8 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
 int input_ff_create_memless(struct input_dev *dev, void *data,
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
+int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots);
+void input_mt_destroy_slots(struct input_dev *dev);
+
 #endif
 #endif
diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h
new file mode 100644
index 00000000000..df00d998a44
--- /dev/null
+++ b/include/linux/input/adxl34x.h
@@ -0,0 +1,349 @@
+/*
+ * include/linux/input/adxl34x.h
+ *
+ * Digital Accelerometer characteristics are highly application specific
+ * and may vary between boards and models. The platform_data for the
+ * device's "struct device" holds this information.
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_INPUT_ADXL34X_H__
+#define __LINUX_INPUT_ADXL34X_H__
+
+struct adxl34x_platform_data {
+
+	/*
+	 * X,Y,Z Axis Offset:
+	 * offer user offset adjustments in twoscompliment
+	 * form with a scale factor of 15.6 mg/LSB (i.e. 0x7F = +2 g)
+	 */
+
+	s8 x_axis_offset;
+	s8 y_axis_offset;
+	s8 z_axis_offset;
+
+	/*
+	 * TAP_X/Y/Z Enable: Setting TAP_X, Y, or Z Enable enables X,
+	 * Y, or Z participation in Tap detection. A '0' excludes the
+	 * selected axis from participation in Tap detection.
+	 * Setting the SUPPRESS bit suppresses Double Tap detection if
+	 * acceleration greater than tap_threshold is present between
+	 * taps.
+	 */
+
+#define ADXL_SUPPRESS	(1 << 3)
+#define ADXL_TAP_X_EN	(1 << 2)
+#define ADXL_TAP_Y_EN	(1 << 1)
+#define ADXL_TAP_Z_EN	(1 << 0)
+
+	u8 tap_axis_control;
+
+	/*
+	 * tap_threshold:
+	 * holds the threshold value for tap detection/interrupts.
+	 * The data format is unsigned. The scale factor is 62.5 mg/LSB
+	 * (i.e. 0xFF = +16 g). A zero value may result in undesirable
+	 * behavior if Tap/Double Tap is enabled.
+	 */
+
+	u8 tap_threshold;
+
+	/*
+	 * tap_duration:
+	 * is an unsigned time value representing the maximum
+	 * time that an event must be above the tap_threshold threshold
+	 * to qualify as a tap event. The scale factor is 625 us/LSB. A zero
+	 * value will prevent Tap/Double Tap functions from working.
+	 */
+
+	u8 tap_duration;
+
+	/*
+	 * tap_latency:
+	 * is an unsigned time value representing the wait time
+	 * from the detection of a tap event to the opening of the time
+	 * window tap_window for a possible second tap event. The scale
+	 * factor is 1.25 ms/LSB. A zero value will disable the Double Tap
+	 * function.
+	 */
+
+	u8 tap_latency;
+
+	/*
+	 * tap_window:
+	 * is an unsigned time value representing the amount
+	 * of time after the expiration of tap_latency during which a second
+	 * tap can begin. The scale factor is 1.25 ms/LSB. A zero value will
+	 * disable the Double Tap function.
+	 */
+
+	u8 tap_window;
+
+	/*
+	 * act_axis_control:
+	 * X/Y/Z Enable: A '1' enables X, Y, or Z participation in activity
+	 * or inactivity detection. A '0' excludes the selected axis from
+	 * participation. If all of the axes are excluded, the function is
+	 * disabled.
+	 * AC/DC: A '0' = DC coupled operation and a '1' = AC coupled
+	 * operation. In DC coupled operation, the current acceleration is
+	 * compared with activity_threshold and inactivity_threshold directly
+	 * to determine whether activity or inactivity is detected. In AC
+	 * coupled operation for activity detection, the acceleration value
+	 * at the start of activity detection is taken as a reference value.
+	 * New samples of acceleration are then compared to this
+	 * reference value and if the magnitude of the difference exceeds
+	 * activity_threshold the device will trigger an activity interrupt. In
+	 * AC coupled operation for inactivity detection, a reference value
+	 * is used again for comparison and is updated whenever the
+	 * device exceeds the inactivity threshold. Once the reference
+	 * value is selected, the device compares the magnitude of the
+	 * difference between the reference value and the current
+	 * acceleration with inactivity_threshold. If the difference is below
+	 * inactivity_threshold for a total of inactivity_time, the device is
+	 * considered inactive and the inactivity interrupt is triggered.
+	 */
+
+#define ADXL_ACT_ACDC		(1 << 7)
+#define ADXL_ACT_X_EN		(1 << 6)
+#define ADXL_ACT_Y_EN		(1 << 5)
+#define ADXL_ACT_Z_EN		(1 << 4)
+#define ADXL_INACT_ACDC		(1 << 3)
+#define ADXL_INACT_X_EN		(1 << 2)
+#define ADXL_INACT_Y_EN		(1 << 1)
+#define ADXL_INACT_Z_EN		(1 << 0)
+
+	u8 act_axis_control;
+
+	/*
+	 * activity_threshold:
+	 * holds the threshold value for activity detection.
+	 * The data format is unsigned. The scale factor is
+	 * 62.5 mg/LSB. A zero value may result in undesirable behavior if
+	 * Activity interrupt is enabled.
+	 */
+
+	u8 activity_threshold;
+
+	/*
+	 * inactivity_threshold:
+	 * holds the threshold value for inactivity
+	 * detection. The data format is unsigned. The scale
+	 * factor is 62.5 mg/LSB. A zero value may result in undesirable
+	 * behavior if Inactivity interrupt is enabled.
+	 */
+
+	u8 inactivity_threshold;
+
+	/*
+	 * inactivity_time:
+	 * is an unsigned time value representing the
+	 * amount of time that acceleration must be below the value in
+	 * inactivity_threshold for inactivity to be declared. The scale factor
+	 * is 1 second/LSB. Unlike the other interrupt functions, which
+	 * operate on unfiltered data, the inactivity function operates on the
+	 * filtered output data. At least one output sample must be
+	 * generated for the inactivity interrupt to be triggered. This will
+	 * result in the function appearing un-responsive if the
+	 * inactivity_time register is set with a value less than the time
+	 * constant of the Output Data Rate. A zero value will result in an
+	 * interrupt when the output data is below inactivity_threshold.
+	 */
+
+	u8 inactivity_time;
+
+	/*
+	 * free_fall_threshold:
+	 * holds the threshold value for Free-Fall detection.
+	 * The data format is unsigned. The root-sum-square(RSS) value
+	 * of all axes is calculated and compared to the value in
+	 * free_fall_threshold to determine if a free fall event may be
+	 * occurring.  The scale factor is 62.5 mg/LSB. A zero value may
+	 * result in undesirable behavior if Free-Fall interrupt is
+	 * enabled. Values between 300 and 600 mg (0x05 to 0x09) are
+	 * recommended.
+	 */
+
+	u8 free_fall_threshold;
+
+	/*
+	 * free_fall_time:
+	 * is an unsigned time value representing the minimum
+	 * time that the RSS value of all axes must be less than
+	 * free_fall_threshold to generate a Free-Fall interrupt. The
+	 * scale factor is 5 ms/LSB. A zero value may result in
+	 * undesirable behavior if Free-Fall interrupt is enabled.
+	 * Values between 100 to 350 ms (0x14 to 0x46) are recommended.
+	 */
+
+	u8 free_fall_time;
+
+	/*
+	 * data_rate:
+	 * Selects device bandwidth and output data rate.
+	 * RATE = 3200 Hz / (2^(15 - x)). Default value is 0x0A, or 100 Hz
+	 * Output Data Rate. An Output Data Rate should be selected that
+	 * is appropriate for the communication protocol and frequency
+	 * selected. Selecting too high of an Output Data Rate with a low
+	 * communication speed will result in samples being discarded.
+	 */
+
+	u8 data_rate;
+
+	/*
+	 * data_range:
+	 * FULL_RES: When this bit is set with the device is
+	 * in Full-Resolution Mode, where the output resolution increases
+	 * with RANGE to maintain a 4 mg/LSB scale factor. When this
+	 * bit is cleared the device is in 10-bit Mode and RANGE determine the
+	 * maximum g-Range and scale factor.
+	 */
+
+#define ADXL_FULL_RES		(1 << 3)
+#define ADXL_RANGE_PM_2g	0
+#define ADXL_RANGE_PM_4g	1
+#define ADXL_RANGE_PM_8g	2
+#define ADXL_RANGE_PM_16g	3
+
+	u8 data_range;
+
+	/*
+	 * low_power_mode:
+	 * A '0' = Normal operation and a '1' = Reduced
+	 * power operation with somewhat higher noise.
+	 */
+
+	u8 low_power_mode;
+
+	/*
+	 * power_mode:
+	 * LINK: A '1' with both the activity and inactivity functions
+	 * enabled will delay the start of the activity function until
+	 * inactivity is detected. Once activity is detected, inactivity
+	 * detection will begin and prevent the detection of activity. This
+	 * bit serially links the activity and inactivity functions. When '0'
+	 * the inactivity and activity functions are concurrent. Additional
+	 * information can be found in the Application section under Link
+	 * Mode.
+	 * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode
+	 * when inactivity (acceleration has been below inactivity_threshold
+	 * for at least inactivity_time) is detected and the LINK bit is set.
+	 * A '0' disables automatic switching to Sleep Mode. See SLEEP
+	 * for further description.
+	 */
+
+#define ADXL_LINK	(1 << 5)
+#define ADXL_AUTO_SLEEP	(1 << 4)
+
+	u8 power_mode;
+
+	/*
+	 * fifo_mode:
+	 * BYPASS The FIFO is bypassed
+	 * FIFO   FIFO collects up to 32 values then stops collecting data
+	 * STREAM FIFO holds the last 32 data values. Once full, the FIFO's
+	 *        oldest data is lost as it is replaced with newer data
+	 *
+	 * DEFAULT should be ADXL_FIFO_STREAM
+	 */
+
+#define ADXL_FIFO_BYPASS	0
+#define ADXL_FIFO_FIFO		1
+#define ADXL_FIFO_STREAM	2
+
+	u8 fifo_mode;
+
+	/*
+	 * watermark:
+	 * The Watermark feature can be used to reduce the interrupt load
+	 * of the system. The FIFO fills up to the value stored in watermark
+	 * [1..32] and then generates an interrupt.
+	 * A '0' disables the watermark feature.
+	 */
+
+	u8 watermark;
+
+	u32 ev_type;	/* EV_ABS or EV_REL */
+
+	u32 ev_code_x;	/* ABS_X,Y,Z or REL_X,Y,Z */
+	u32 ev_code_y;	/* ABS_X,Y,Z or REL_X,Y,Z */
+	u32 ev_code_z;	/* ABS_X,Y,Z or REL_X,Y,Z */
+
+	/*
+	 * A valid BTN or KEY Code; use tap_axis_control to disable
+	 * event reporting
+	 */
+
+	u32 ev_code_tap[3];	/* EV_KEY {X-Axis, Y-Axis, Z-Axis} */
+
+	/*
+	 * A valid BTN or KEY Code for Free-Fall or Activity enables
+	 * input event reporting. A '0' disables the Free-Fall or
+	 * Activity reporting.
+	 */
+
+	u32 ev_code_ff;	/* EV_KEY */
+	u32 ev_code_act_inactivity;	/* EV_KEY */
+
+	/*
+	 * Use ADXL34x INT2 instead of INT1
+	 */
+	u8 use_int2;
+
+	/*
+	 * ADXL346 only ORIENTATION SENSING feature
+	 * The orientation function of the ADXL346 reports both 2-D and
+	 * 3-D orientation concurrently.
+	 */
+
+#define ADXL_EN_ORIENTATION_2D		1
+#define ADXL_EN_ORIENTATION_3D		2
+#define ADXL_EN_ORIENTATION_2D_3D	3
+
+	u8 orientation_enable;
+
+	/*
+	 * The width of the deadzone region between two or more
+	 * orientation positions is determined by setting the Deadzone
+	 * value. The deadzone region size can be specified with a
+	 * resolution of 3.6deg. The deadzone angle represents the total
+	 * angle where the orientation is considered invalid.
+	 */
+
+#define ADXL_DEADZONE_ANGLE_0p0		0	/* !!!0.0 [deg] */
+#define ADXL_DEADZONE_ANGLE_3p6		1	/* 3.6 [deg] */
+#define ADXL_DEADZONE_ANGLE_7p2		2	/* 7.2 [deg] */
+#define ADXL_DEADZONE_ANGLE_10p8	3	/* 10.8 [deg] */
+#define ADXL_DEADZONE_ANGLE_14p4	4	/* 14.4 [deg] */
+#define ADXL_DEADZONE_ANGLE_18p0	5	/* 18.0 [deg] */
+#define ADXL_DEADZONE_ANGLE_21p6	6	/* 21.6 [deg] */
+#define ADXL_DEADZONE_ANGLE_25p2	7	/* 25.2 [deg] */
+
+	u8 deadzone_angle;
+
+	/*
+	 * To eliminate most human motion such as walking or shaking,
+	 * a Divisor value should be selected to effectively limit the
+	 * orientation bandwidth. Set the depth of the filter used to
+	 * low-pass filter the measured acceleration for stable
+	 * orientation sensing
+	 */
+
+#define ADXL_LP_FILTER_DIVISOR_2	0
+#define ADXL_LP_FILTER_DIVISOR_4	1
+#define ADXL_LP_FILTER_DIVISOR_8	2
+#define ADXL_LP_FILTER_DIVISOR_16	3
+#define ADXL_LP_FILTER_DIVISOR_32	4
+#define ADXL_LP_FILTER_DIVISOR_64	5
+#define ADXL_LP_FILTER_DIVISOR_128	6
+#define ADXL_LP_FILTER_DIVISOR_256	7
+
+	u8 divisor_length;
+
+	u32 ev_codes_orient_2d[4];	/* EV_KEY {+X, -X, +Y, -Y} */
+	u32 ev_codes_orient_3d[6];	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+};
+#endif
diff --git a/include/linux/input/cy8ctmg110_pdata.h b/include/linux/input/cy8ctmg110_pdata.h
new file mode 100644
index 00000000000..09522cb5991
--- /dev/null
+++ b/include/linux/input/cy8ctmg110_pdata.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_CY8CTMG110_PDATA_H
+#define _LINUX_CY8CTMG110_PDATA_H
+
+struct cy8ctmg110_pdata
+{
+	int reset_pin;		/* Reset pin is wired to this GPIO (optional) */
+	int irq_pin;		/* IRQ pin is wired to this GPIO */
+};
+
+#endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index c964cd7f436..80352ad6581 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -41,6 +41,9 @@ struct matrix_keymap_data {
  * @col_scan_delay_us: delay, measured in microseconds, that is
  *	needed before we can keypad after activating column gpio
  * @debounce_ms: debounce interval in milliseconds
+ * @clustered_irq: may be specified if interrupts of all row/column GPIOs
+ *	are bundled to one single irq
+ * @clustered_irq_flags: flags that are needed for the clustered irq
  * @active_low: gpio polarity
  * @wakeup: controls whether the device should be set up as wakeup
  *	source
@@ -63,6 +66,9 @@ struct matrix_keypad_platform_data {
 	/* key debounce interval in milli-second */
 	unsigned int	debounce_ms;
 
+	unsigned int	clustered_irq;
+	unsigned int	clustered_irq_flags;
+
 	bool		active_low;
 	bool		wakeup;
 	bool		no_autorepeat;
diff --git a/include/linux/intel_pmic_gpio.h b/include/linux/intel_pmic_gpio.h
new file mode 100644
index 00000000000..920109a2919
--- /dev/null
+++ b/include/linux/intel_pmic_gpio.h
@@ -0,0 +1,15 @@
+#ifndef LINUX_INTEL_PMIC_H
+#define LINUX_INTEL_PMIC_H
+
+struct intel_pmic_gpio_platform_data {
+	/* the first IRQ of the chip */
+	unsigned	irq_base;
+	/* number assigned to the first GPIO */
+	unsigned	gpio_base;
+	/* sram address for gpiointr register, the langwell chip will map
+	 * the PMIC spi GPIO expander's GPIOINTR register in sram.
+	 */
+	unsigned	gpiointr;
+};
+
+#endif
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index a0bb301afac..64d52913303 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -7,7 +7,6 @@
 struct cfq_queue;
 struct cfq_io_context {
 	void *key;
-	unsigned long dead_key;
 
 	struct cfq_queue *cfqq[2];
 
diff --git a/include/linux/iscsi_boot_sysfs.h b/include/linux/iscsi_boot_sysfs.h
new file mode 100644
index 00000000000..f1e6c184f14
--- /dev/null
+++ b/include/linux/iscsi_boot_sysfs.h
@@ -0,0 +1,123 @@
+/*
+ * Export the iSCSI boot info to userland via sysfs.
+ *
+ * Copyright (C) 2010 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2010 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _ISCSI_BOOT_SYSFS_
+#define _ISCSI_BOOT_SYSFS_
+
+/*
+ * The text attributes names for each of the kobjects.
+*/
+enum iscsi_boot_eth_properties_enum {
+	ISCSI_BOOT_ETH_INDEX,
+	ISCSI_BOOT_ETH_FLAGS,
+	ISCSI_BOOT_ETH_IP_ADDR,
+	ISCSI_BOOT_ETH_SUBNET_MASK,
+	ISCSI_BOOT_ETH_ORIGIN,
+	ISCSI_BOOT_ETH_GATEWAY,
+	ISCSI_BOOT_ETH_PRIMARY_DNS,
+	ISCSI_BOOT_ETH_SECONDARY_DNS,
+	ISCSI_BOOT_ETH_DHCP,
+	ISCSI_BOOT_ETH_VLAN,
+	ISCSI_BOOT_ETH_MAC,
+	/* eth_pci_bdf - this is replaced by link to the device itself. */
+	ISCSI_BOOT_ETH_HOSTNAME,
+	ISCSI_BOOT_ETH_END_MARKER,
+};
+
+enum iscsi_boot_tgt_properties_enum {
+	ISCSI_BOOT_TGT_INDEX,
+	ISCSI_BOOT_TGT_FLAGS,
+	ISCSI_BOOT_TGT_IP_ADDR,
+	ISCSI_BOOT_TGT_PORT,
+	ISCSI_BOOT_TGT_LUN,
+	ISCSI_BOOT_TGT_CHAP_TYPE,
+	ISCSI_BOOT_TGT_NIC_ASSOC,
+	ISCSI_BOOT_TGT_NAME,
+	ISCSI_BOOT_TGT_CHAP_NAME,
+	ISCSI_BOOT_TGT_CHAP_SECRET,
+	ISCSI_BOOT_TGT_REV_CHAP_NAME,
+	ISCSI_BOOT_TGT_REV_CHAP_SECRET,
+	ISCSI_BOOT_TGT_END_MARKER,
+};
+
+enum iscsi_boot_initiator_properties_enum {
+	ISCSI_BOOT_INI_INDEX,
+	ISCSI_BOOT_INI_FLAGS,
+	ISCSI_BOOT_INI_ISNS_SERVER,
+	ISCSI_BOOT_INI_SLP_SERVER,
+	ISCSI_BOOT_INI_PRI_RADIUS_SERVER,
+	ISCSI_BOOT_INI_SEC_RADIUS_SERVER,
+	ISCSI_BOOT_INI_INITIATOR_NAME,
+	ISCSI_BOOT_INI_END_MARKER,
+};
+
+struct attribute_group;
+
+struct iscsi_boot_kobj {
+	struct kobject kobj;
+	struct attribute_group *attr_group;
+	struct list_head list;
+
+	/*
+	 * Pointer to store driver specific info. If set this will
+	 * be freed for the LLD when the kobj release function is called.
+	 */
+	void *data;
+	/*
+	 * Driver specific show function.
+	 *
+	 * The enum of the type. This can be any value of the above
+	 * properties.
+	 */
+	ssize_t (*show) (void *data, int type, char *buf);
+
+	/*
+	 * Drivers specific visibility function.
+	 * The function should return if they the attr should be readable
+	 * writable or should not be shown.
+	 *
+	 * The enum of the type. This can be any value of the above
+	 * properties.
+	 */
+	mode_t (*is_visible) (void *data, int type);
+};
+
+struct iscsi_boot_kset {
+	struct list_head kobj_list;
+	struct kset *kset;
+};
+
+struct iscsi_boot_kobj *
+iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
+			    void *data,
+			    ssize_t (*show) (void *data, int type, char *buf),
+			    mode_t (*is_visible) (void *data, int type));
+
+struct iscsi_boot_kobj *
+iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
+			   void *data,
+			   ssize_t (*show) (void *data, int type, char *buf),
+			   mode_t (*is_visible) (void *data, int type));
+struct iscsi_boot_kobj *
+iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
+			 void *data,
+			 ssize_t (*show) (void *data, int type, char *buf),
+			 mode_t (*is_visible) (void *data, int type));
+
+struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name);
+struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno);
+void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset);
+
+#endif
diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h
index d2e4042f8f5..8ba7e5b9d62 100644
--- a/include/linux/iscsi_ibft.h
+++ b/include/linux/iscsi_ibft.h
@@ -21,21 +21,13 @@
 #ifndef ISCSI_IBFT_H
 #define ISCSI_IBFT_H
 
-struct ibft_table_header {
-	char signature[4];
-	u32 length;
-	u8 revision;
-	u8 checksum;
-	char oem_id[6];
-	char oem_table_id[8];
-	char reserved[24];
-} __attribute__((__packed__));
+#include <acpi/acpi.h>
 
 /*
  * Logical location of iSCSI Boot Format Table.
  * If the value is NULL there is no iBFT on the machine.
  */
-extern struct ibft_table_header *ibft_addr;
+extern struct acpi_table_ibft *ibft_addr;
 
 /*
  * Routine used to find and reserve the iSCSI Boot Format Table. The
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index a4d2e9f7088..adf832dec3f 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1026,11 +1026,12 @@ void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
 
 struct jbd2_buffer_trigger_type {
 	/*
-	 * Fired just before a buffer is written to the journal.
-	 * mapped_data is a mapped buffer that is the frozen data for
-	 * commit.
+	 * Fired a the moment data to write to the journal are known to be
+	 * stable - so either at the moment b_frozen_data is created or just
+	 * before a buffer is written to the journal.  mapped_data is a mapped
+	 * buffer that is the frozen data for commit.
 	 */
-	void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+	void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
 			 struct buffer_head *bh, void *mapped_data,
 			 size_t size);
 
@@ -1042,7 +1043,7 @@ struct jbd2_buffer_trigger_type {
 			struct buffer_head *bh);
 };
 
-extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
 				       void *mapped_data,
 				       struct jbd2_buffer_trigger_type *triggers);
 extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 23ea0225390..636fc381c89 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -524,6 +524,12 @@ struct kvm_enable_cap {
 #define KVM_CAP_PPC_OSI 52
 #define KVM_CAP_PPC_UNSET_IRQ 53
 #define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -613,6 +619,7 @@ struct kvm_clock_data {
  */
 #define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
 #define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
 #define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
 #define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
 #define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
@@ -714,6 +721,12 @@ struct kvm_clock_data {
 #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
 #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
 #define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 7cb116afa1c..c13cc48697a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -81,13 +81,14 @@ struct kvm_vcpu {
 	int vcpu_id;
 	struct mutex mutex;
 	int   cpu;
+	atomic_t guest_mode;
 	struct kvm_run *run;
 	unsigned long requests;
 	unsigned long guest_debug;
 	int srcu_idx;
 
 	int fpu_active;
-	int guest_fpu_loaded;
+	int guest_fpu_loaded, guest_xcr0_loaded;
 	wait_queue_head_t wq;
 	int sigset_active;
 	sigset_t sigset;
@@ -123,6 +124,7 @@ struct kvm_memory_slot {
 	} *lpage_info[KVM_NR_PAGE_SIZES - 1];
 	unsigned long userspace_addr;
 	int user_alloc;
+	int id;
 };
 
 static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
@@ -266,6 +268,8 @@ extern pfn_t bad_pfn;
 
 int is_error_page(struct page *page);
 int is_error_pfn(pfn_t pfn);
+int is_hwpoison_pfn(pfn_t pfn);
+int is_fault_pfn(pfn_t pfn);
 int kvm_is_error_hva(unsigned long addr);
 int kvm_set_memory_region(struct kvm *kvm,
 			  struct kvm_userspace_memory_region *mem,
@@ -284,8 +288,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 				int user_alloc);
 void kvm_disable_largepages(void);
 void kvm_arch_flush_shadow(struct kvm *kvm);
-gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn);
-gfn_t unalias_gfn_instantiation(struct kvm *kvm, gfn_t gfn);
 
 struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
 unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn);
@@ -445,7 +447,8 @@ void kvm_register_irq_mask_notifier(struct kvm *kvm, int irq,
 				    struct kvm_irq_mask_notifier *kimn);
 void kvm_unregister_irq_mask_notifier(struct kvm *kvm, int irq,
 				      struct kvm_irq_mask_notifier *kimn);
-void kvm_fire_mask_notifiers(struct kvm *kvm, int irq, bool mask);
+void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin,
+			     bool mask);
 
 #ifdef __KVM_HAVE_IOAPIC
 void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic,
@@ -562,10 +565,6 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se
 }
 #endif
 
-#ifndef KVM_ARCH_HAS_UNALIAS_INSTANTIATION
-#define unalias_gfn_instantiation unalias_gfn
-#endif
-
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
 
 #define KVM_MAX_IRQ_ROUTES 1024
@@ -628,5 +627,25 @@ static inline long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
 
 #endif
 
+static inline void kvm_make_request(int req, struct kvm_vcpu *vcpu)
+{
+	set_bit(req, &vcpu->requests);
+}
+
+static inline bool kvm_make_check_request(int req, struct kvm_vcpu *vcpu)
+{
+	return test_and_set_bit(req, &vcpu->requests);
+}
+
+static inline bool kvm_check_request(int req, struct kvm_vcpu *vcpu)
+{
+	if (test_bit(req, &vcpu->requests)) {
+		clear_bit(req, &vcpu->requests);
+		return true;
+	} else {
+		return false;
+	}
+}
+
 #endif
 
diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h
index fb46efbeabe..7ac0d4eee43 100644
--- a/include/linux/kvm_types.h
+++ b/include/linux/kvm_types.h
@@ -32,11 +32,11 @@
 
 typedef unsigned long  gva_t;
 typedef u64            gpa_t;
-typedef unsigned long  gfn_t;
+typedef u64            gfn_t;
 
 typedef unsigned long  hva_t;
 typedef u64            hpa_t;
-typedef unsigned long  hfn_t;
+typedef u64            hfn_t;
 
 typedef hfn_t pfn_t;
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3bad2701bfa..b85f3ff34d7 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1023,6 +1023,7 @@ extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 extern int ata_std_bios_param(struct scsi_device *sdev,
 			      struct block_device *bdev,
 			      sector_t capacity, int geom[]);
+extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
 extern int ata_scsi_slave_config(struct scsi_device *sdev);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1174,6 +1175,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
 	.slave_configure	= ata_scsi_slave_config,	\
 	.slave_destroy		= ata_scsi_slave_destroy,	\
 	.bios_param		= ata_std_bios_param,		\
+	.unlock_native_capacity	= ata_scsi_unlock_native_capacity, \
 	.sdev_attrs		= ata_common_sdev_attrs
 
 #define ATA_NCQ_SHT(drv_name)					\
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 5126cceb6ae..7135ebc8428 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -18,8 +18,8 @@
 # define asmregparm
 #endif
 
-#define __page_aligned_data	__section(.data.page_aligned) __aligned(PAGE_SIZE)
-#define __page_aligned_bss	__section(.bss.page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_data	__section(.data..page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_bss	__section(.bss..page_aligned) __aligned(PAGE_SIZE)
 
 /*
  * For assembly routines.
@@ -27,8 +27,8 @@
  * Note when using these that you must specify the appropriate
  * alignment directives yourself
  */
-#define __PAGE_ALIGNED_DATA	.section ".data.page_aligned", "aw"
-#define __PAGE_ALIGNED_BSS	.section ".bss.page_aligned", "aw"
+#define __PAGE_ALIGNED_DATA	.section ".data..page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS	.section ".bss..page_aligned", "aw"
 
 /*
  * This is used by architectures to keep arguments on the stack
diff --git a/include/linux/list.h b/include/linux/list.h
index 8392884a297..5d57a3a1fa1 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -544,6 +544,21 @@ static inline void list_splice_tail_init(struct list_head *list,
 	     &pos->member != (head); 					\
 	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
 
+/**
+ * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
+ * @pos:	the loop cursor used in the list_for_each_entry_safe loop
+ * @n:		temporary storage used in list_for_each_entry_safe
+ * @member:	the name of the list_struct within the struct.
+ *
+ * list_safe_reset_next is not safe to use in general if the list may be
+ * modified concurrently (eg. the lock is dropped in the loop body). An
+ * exception to this is if the cursor element (pos) is pinned in the list,
+ * and list_safe_reset_next is called after re-taking the lock and before
+ * completing the current iteration of the loop body.
+ */
+#define list_safe_reset_next(pos, n, member)				\
+	n = list_entry(pos->member.next, typeof(*pos), member)
+
 /*
  * Double linked lists with a single pointer list head.
  * Mostly useful for hash tables where the two pointer list head is
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
deleted file mode 100644
index f3d14333ebe..00000000000
--- a/include/linux/lmb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_LMB_H
-#define _LINUX_LMB_H
-#ifdef __KERNEL__
-
-/*
- * Logical memory blocks.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#define MAX_LMB_REGIONS 128
-
-struct lmb_property {
-	u64 base;
-	u64 size;
-};
-
-struct lmb_region {
-	unsigned long cnt;
-	u64 size;
-	struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
-	unsigned long debug;
-	u64 rmo_size;
-	struct lmb_region memory;
-	struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long lmb_add(u64 base, u64 size);
-extern long lmb_remove(u64 base, u64 size);
-extern long __init lmb_free(u64 base, u64 size);
-extern long __init lmb_reserve(u64 base, u64 size);
-extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
-				u64 (*nid_range)(u64, u64, int *));
-extern u64 __init lmb_alloc(u64 size, u64 align);
-extern u64 __init lmb_alloc_base(u64 size,
-		u64, u64 max_addr);
-extern u64 __init __lmb_alloc_base(u64 size,
-		u64 align, u64 max_addr);
-extern u64 __init lmb_phys_mem_size(void);
-extern u64 lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(u64 memory_limit);
-extern int __init lmb_is_reserved(u64 addr);
-extern int lmb_is_region_reserved(u64 base, u64 size);
-extern int lmb_find(struct lmb_property *res);
-
-extern void lmb_dump_all(void);
-
-static inline u64
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].size;
-}
-static inline u64
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline u64
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline u64
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_start_pfn(type, region_nr) +
-	       lmb_size_pages(type, region_nr);
-}
-
-#include <asm/lmb.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_LMB_H */
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index 6907251d520..112a5503335 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -90,10 +90,42 @@ struct common_audit_data {
 			u32 requested;
 			u32 audited;
 			u32 denied;
+			/*
+			 * auditdeny is a bit tricky and unintuitive.  See the
+			 * comments in avc.c for it's meaning and usage.
+			 */
+			u32 auditdeny;
 			struct av_decision *avd;
 			int result;
 		} selinux_audit_data;
 #endif
+#ifdef CONFIG_SECURITY_APPARMOR
+		struct {
+			int error;
+			int op;
+			int type;
+			void *profile;
+			const char *name;
+			const char *info;
+			union {
+				void *target;
+				struct {
+					long pos;
+					void *target;
+				} iface;
+				struct {
+					int rlim;
+					unsigned long max;
+				} rlim;
+				struct {
+					const char *target;
+					u32 request;
+					u32 denied;
+					uid_t ouid;
+				} fs;
+			};
+		} apparmor_audit_data;
+#endif
 	};
 	/* these callback will be implemented by a specific LSM */
 	void (*lsm_pre_audit)(struct audit_buffer *, void *);
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
new file mode 100644
index 00000000000..d0f08018335
--- /dev/null
+++ b/include/linux/marvell_phy.h
@@ -0,0 +1,21 @@
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK		0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101		0x01410c60
+#define MARVELL_PHY_ID_88E1112		0x01410c90
+#define MARVELL_PHY_ID_88E1111		0x01410cc0
+#define MARVELL_PHY_ID_88E1118		0x01410e10
+#define MARVELL_PHY_ID_88E1121R		0x01410cb0
+#define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1240		0x01410e30
+#define MARVELL_PHY_ID_88EC048		0x01410e90
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
+
+#endif /* _MARVELL_PHY_H */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
new file mode 100644
index 00000000000..a59faf2b5ed
--- /dev/null
+++ b/include/linux/memblock.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_MEMBLOCK_H
+#define _LINUX_MEMBLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_MEMBLOCK_REGIONS 128
+
+struct memblock_property {
+	u64 base;
+	u64 size;
+};
+
+struct memblock_region {
+	unsigned long cnt;
+	u64 size;
+	struct memblock_property region[MAX_MEMBLOCK_REGIONS+1];
+};
+
+struct memblock {
+	unsigned long debug;
+	u64 rmo_size;
+	struct memblock_region memory;
+	struct memblock_region reserved;
+};
+
+extern struct memblock memblock;
+
+extern void __init memblock_init(void);
+extern void __init memblock_analyze(void);
+extern long memblock_add(u64 base, u64 size);
+extern long memblock_remove(u64 base, u64 size);
+extern long __init memblock_free(u64 base, u64 size);
+extern long __init memblock_reserve(u64 base, u64 size);
+extern u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+				u64 (*nid_range)(u64, u64, int *));
+extern u64 __init memblock_alloc(u64 size, u64 align);
+extern u64 __init memblock_alloc_base(u64 size,
+		u64, u64 max_addr);
+extern u64 __init __memblock_alloc_base(u64 size,
+		u64 align, u64 max_addr);
+extern u64 __init memblock_phys_mem_size(void);
+extern u64 memblock_end_of_DRAM(void);
+extern void __init memblock_enforce_memory_limit(u64 memory_limit);
+extern int __init memblock_is_reserved(u64 addr);
+extern int memblock_is_region_reserved(u64 base, u64 size);
+extern int memblock_find(struct memblock_property *res);
+
+extern void memblock_dump_all(void);
+
+static inline u64
+memblock_size_bytes(struct memblock_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].size;
+}
+static inline u64
+memblock_size_pages(struct memblock_region *type, unsigned long region_nr)
+{
+	return memblock_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+memblock_start_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+memblock_end_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+	return memblock_start_pfn(type, region_nr) +
+	       memblock_size_pages(type, region_nr);
+}
+
+#include <asm/memblock.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MEMBLOCK_H */
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index b631c46cffd..f6c9b7dcb9f 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -3,6 +3,12 @@
 #include <linux/module.h>
 #include <linux/major.h>
 
+/*
+ *	These allocations are managed by device@lanana.org. If you use an
+ *	entry that is not in assigned your entry may well be moved and
+ *	reassigned, or set dynamic if a fixed value is not justified.
+ */
+
 #define PSMOUSE_MINOR		1
 #define MS_BUSMOUSE_MINOR	2
 #define ATIXL_BUSMOUSE_MINOR	3
@@ -30,7 +36,6 @@
 #define HPET_MINOR		228
 #define FUSE_MINOR		229
 #define KVM_MINOR		232
-#define VHOST_NET_MINOR		233
 #define BTRFS_MINOR		234
 #define AUTOFS_MINOR		235
 #define MISC_DYNAMIC_MINOR	255
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b969efb0378..7a9ab7db197 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -999,7 +999,7 @@ static inline void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
  * querying the cache size, so a fastpath for that case is appropriate.
  */
 struct shrinker {
-	int (*shrink)(int nr_to_scan, gfp_t gfp_mask);
+	int (*shrink)(struct shrinker *, int nr_to_scan, gfp_t gfp_mask);
 	int seeks;	/* seeks to recreate an obj */
 
 	/* These are for internal use */
@@ -1465,6 +1465,14 @@ extern int sysctl_memory_failure_recovery;
 extern void shake_page(struct page *p, int access);
 extern atomic_long_t mce_bad_pages;
 extern int soft_offline_page(struct page *page, int flags);
+#ifdef CONFIG_MEMORY_FAILURE
+int is_hwpoison_address(unsigned long addr);
+#else
+static inline int is_hwpoison_address(unsigned long addr)
+{
+	return 0;
+}
+#endif
 
 extern void dump_page(struct page *page);
 
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index aafe832f18a..d4a2ebbdab4 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -14,6 +14,9 @@
 #ifndef __SH_MMCIF_H__
 #define __SH_MMCIF_H__
 
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
 /*
  * MMCIF : CE_CLK_CTRL [19:16]
  * 1000 : Peripheral clock / 512
@@ -36,4 +39,162 @@ struct sh_mmcif_plat_data {
 	u32	ocr;
 };
 
+#define MMCIF_CE_CMD_SET	0x00000000
+#define MMCIF_CE_ARG		0x00000008
+#define MMCIF_CE_ARG_CMD12	0x0000000C
+#define MMCIF_CE_CMD_CTRL	0x00000010
+#define MMCIF_CE_BLOCK_SET	0x00000014
+#define MMCIF_CE_CLK_CTRL	0x00000018
+#define MMCIF_CE_BUF_ACC	0x0000001C
+#define MMCIF_CE_RESP3		0x00000020
+#define MMCIF_CE_RESP2		0x00000024
+#define MMCIF_CE_RESP1		0x00000028
+#define MMCIF_CE_RESP0		0x0000002C
+#define MMCIF_CE_RESP_CMD12	0x00000030
+#define MMCIF_CE_DATA		0x00000034
+#define MMCIF_CE_INT		0x00000040
+#define MMCIF_CE_INT_MASK	0x00000044
+#define MMCIF_CE_HOST_STS1	0x00000048
+#define MMCIF_CE_HOST_STS2	0x0000004C
+#define MMCIF_CE_VERSION	0x0000007C
+
+extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+	return readl(addr + reg);
+}
+
+extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+	writel(val, addr + reg);
+}
+
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+					  unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+	unsigned long tmp;
+	int cnt;
+
+	for (cnt = 0; cnt < 1000000; cnt++) {
+		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+		if (tmp & mask) {
+			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+				    unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_boot_cmd_send(base, cmd, arg);
+	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+					       unsigned int block_nr,
+					       unsigned long *buf)
+{
+	int k;
+
+	/* CMD13 - Status */
+	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+		return -1;
+
+	/* CMD17 - Read */
+	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+		return -1;
+
+	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+	return 0;
+}
+
+extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+					unsigned long first_block,
+					unsigned long nr_blocks,
+					void *buf)
+{
+	unsigned long k;
+	int ret = 0;
+
+	/* CMD16 - Set the block size */
+	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+	for (k = 0; !ret && k < nr_blocks; k++)
+		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+						   buf + (k * SH_MMCIF_BBS));
+
+	return ret;
+}
+
+extern inline void sh_mmcif_boot_init(void __iomem *base)
+{
+	unsigned long tmp;
+
+	/* reset */
+	tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+
+	/* byte swap */
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+
+	/* Set block size in MMCIF hardware */
+	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+
+	/* CMD0 */
+	sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+	/* CMD1 - Get OCR */
+	do {
+		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+		 != 0x80000000);
+
+	/* CMD2 - Get CID */
+	sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+	/* CMD3 - Set card relative address */
+	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+				       unsigned char *buf,
+				       unsigned long no_bytes)
+{
+	unsigned long tmp;
+
+	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+
+	/* CMD9 - Get CSD */
+	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+	/* CMD7 - Select the card */
+	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+	tmp = no_bytes / SH_MMCIF_BBS;
+	tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0;
+
+	sh_mmcif_boot_do_read(base, 512, tmp, buf);
+}
+
 #endif /* __SH_MMCIF_H__ */
diff --git a/include/linux/module.h b/include/linux/module.h
index 6914fcad467..8a6b9fdc7ff 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -181,6 +181,13 @@ void *__symbol_get(const char *symbol);
 void *__symbol_get_gpl(const char *symbol);
 #define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
 
+/* modules using other modules: kdb wants to see this. */
+struct module_use {
+	struct list_head source_list;
+	struct list_head target_list;
+	struct module *source, *target;
+};
+
 #ifndef __GENKSYMS__
 #ifdef CONFIG_MODVERSIONS
 /* Mark the CRC weak since genksyms apparently decides not to
@@ -359,7 +366,9 @@ struct module
 
 #ifdef CONFIG_MODULE_UNLOAD
 	/* What modules depend on me? */
-	struct list_head modules_which_use_me;
+	struct list_head source_list;
+	/* What modules do I depend on? */
+	struct list_head target_list;
 
 	/* Who is waiting for us to be unloaded */
 	struct task_struct *waiter;
@@ -663,43 +672,10 @@ static inline int module_get_iter_tracepoints(struct tracepoint_iter *iter)
 
 #endif /* CONFIG_MODULES */
 
-struct device_driver;
 #ifdef CONFIG_SYSFS
-struct module;
-
 extern struct kset *module_kset;
 extern struct kobj_type module_ktype;
 extern int module_sysfs_initialized;
-
-int mod_sysfs_init(struct module *mod);
-int mod_sysfs_setup(struct module *mod,
-			   struct kernel_param *kparam,
-			   unsigned int num_params);
-int module_add_modinfo_attrs(struct module *mod);
-void module_remove_modinfo_attrs(struct module *mod);
-
-#else /* !CONFIG_SYSFS */
-
-static inline int mod_sysfs_init(struct module *mod)
-{
-	return 0;
-}
-
-static inline int mod_sysfs_setup(struct module *mod,
-			   struct kernel_param *kparam,
-			   unsigned int num_params)
-{
-	return 0;
-}
-
-static inline int module_add_modinfo_attrs(struct module *mod)
-{
-	return 0;
-}
-
-static inline void module_remove_modinfo_attrs(struct module *mod)
-{ }
-
 #endif /* CONFIG_SYSFS */
 
 #define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 1bca6171b1a..d52b570569b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -794,7 +794,7 @@ struct net_device {
 	 */
 	char			name[IFNAMSIZ];
 
-	struct pm_qos_request_list *pm_qos_req;
+	struct pm_qos_request_list pm_qos_req;
 
 	/* device name hash chain */
 	struct hlist_node	name_hlist;
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 77c2ae53431..bad4d121b16 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -493,8 +493,15 @@ extern int nfs_wb_all(struct inode *inode);
 extern int nfs_wb_page(struct inode *inode, struct page* page);
 extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
 #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+extern int  nfs_commit_inode(struct inode *, int);
 extern struct nfs_write_data *nfs_commitdata_alloc(void);
 extern void nfs_commit_free(struct nfs_write_data *wdata);
+#else
+static inline int
+nfs_commit_inode(struct inode *inode, int how)
+{
+	return 0;
+}
 #endif
 
 static inline int
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 9bdd91486b4..7e4cd616bcb 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -253,7 +253,7 @@ struct omapfb_platform_data {
 /* in arch/arm/plat-omap/fb.c */
 extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
 extern void omapfb_set_ctrl_platform_data(void *pdata);
-extern void omapfb_reserve_sdram(void);
+extern void omapfb_reserve_sdram_memblock(void);
 
 #endif
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6a471aba3b0..f26fda76b87 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -288,6 +288,7 @@ struct pci_dev {
 	 */
 	unsigned int	irq;
 	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+	resource_size_t	fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
 
 	/* These fields are used by common fixups */
 	unsigned int	transparent:1;	/* Transparent PCI bridge */
@@ -632,6 +633,7 @@ void pci_fixup_cardbus(struct pci_bus *);
 
 /* Generic PCI functions used internally */
 
+void pcibios_scan_specific_bus(int busn);
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
 void pci_bus_add_devices(const struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 384c2a25db1..e69612cace6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1261,6 +1261,7 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
@@ -2321,6 +2322,7 @@
 #define PCI_VENDOR_ID_JMICRON		0x197B
 #define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
 #define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
 #define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
 #define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
@@ -2532,11 +2534,63 @@
 #define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
 #define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
 #define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 68567c0b3a5..ce2dc655cd1 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -131,11 +131,11 @@
  * Declaration/definition used for per-CPU variables that must be page aligned.
  */
 #define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)			\
-	DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")		\
+	DECLARE_PER_CPU_SECTION(type, name, "..page_aligned")		\
 	__aligned(PAGE_SIZE)
 
 #define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")		\
+	DEFINE_PER_CPU_SECTION(type, name, "..page_aligned")		\
 	__aligned(PAGE_SIZE)
 
 /*
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index fb6c91eac7e..5d0266d9498 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -585,6 +585,7 @@ enum perf_event_active_state {
 struct file;
 
 struct perf_mmap_data {
+	atomic_t			refcount;
 	struct rcu_head			rcu_head;
 #ifdef CONFIG_PERF_USE_VMALLOC
 	struct work_struct		work;
@@ -592,7 +593,6 @@ struct perf_mmap_data {
 #endif
 	int				nr_pages;	/* nr of data pages  */
 	int				writable;	/* are we writable   */
-	int				nr_locked;	/* nr pages mlocked  */
 
 	atomic_t			poll;		/* POLL_ for wakeups */
 
@@ -631,6 +631,9 @@ struct swevent_hlist {
 	struct rcu_head		rcu_head;
 };
 
+#define PERF_ATTACH_CONTEXT	0x01
+#define PERF_ATTACH_GROUP	0x02
+
 /**
  * struct perf_event - performance event kernel representation:
  */
@@ -643,10 +646,10 @@ struct perf_event {
 	int				nr_siblings;
 	int				group_flags;
 	struct perf_event		*group_leader;
-	struct perf_event		*output;
 	const struct pmu		*pmu;
 
 	enum perf_event_active_state	state;
+	unsigned int			attach_state;
 	atomic64_t			count;
 
 	/*
@@ -704,6 +707,8 @@ struct perf_event {
 	/* mmap bits */
 	struct mutex			mmap_mutex;
 	atomic_t			mmap_count;
+	int				mmap_locked;
+	struct user_struct		*mmap_user;
 	struct perf_mmap_data		*data;
 
 	/* poll related */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 126120819a0..eec3bae164d 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -12,7 +12,7 @@ struct pt_regs;
 
 extern int		register_exec_domain(struct exec_domain *);
 extern int		unregister_exec_domain(struct exec_domain *);
-extern int		__set_personality(unsigned long);
+extern int		__set_personality(unsigned int);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 16de3933c45..445796945ac 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -139,7 +139,9 @@ void pipe_lock(struct pipe_inode_info *);
 void pipe_unlock(struct pipe_inode_info *);
 void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
 
-extern unsigned int pipe_max_pages;
+extern unsigned int pipe_max_size, pipe_min_size;
+int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+
 
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe);
diff --git a/include/linux/plist.h b/include/linux/plist.h
index 6898985e7b3..7254eda078e 100644
--- a/include/linux/plist.h
+++ b/include/linux/plist.h
@@ -260,6 +260,23 @@ static inline int plist_node_empty(const struct plist_node *node)
 #endif
 
 /**
+ * plist_last_entry - get the struct for the last entry
+ * @head:	the &struct plist_head pointer
+ * @type:	the type of the struct this is embedded in
+ * @member:	the name of the list_struct within the struct
+ */
+#ifdef CONFIG_DEBUG_PI_LIST
+# define plist_last_entry(head, type, member)	\
+({ \
+	WARN_ON(plist_head_empty(head)); \
+	container_of(plist_last(head), type, member); \
+})
+#else
+# define plist_last_entry(head, type, member)	\
+	container_of(plist_last(head), type, member)
+#endif
+
+/**
  * plist_first - return the first node (and thus, highest priority)
  * @head:	the &struct plist_head pointer
  *
@@ -271,4 +288,16 @@ static inline struct plist_node *plist_first(const struct plist_head *head)
 			  struct plist_node, plist.node_list);
 }
 
+/**
+ * plist_last - return the last node (and thus, lowest priority)
+ * @head:	the &struct plist_head pointer
+ *
+ * Assumes the plist is _not_ empty.
+ */
+static inline struct plist_node *plist_last(const struct plist_head *head)
+{
+	return list_entry(head->node_list.prev,
+			  struct plist_node, plist.node_list);
+}
+
 #endif
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 8e258c72797..52e8c55ff31 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -457,6 +457,7 @@ struct dev_pm_info {
 #ifdef CONFIG_PM_SLEEP
 	struct list_head	entry;
 	struct completion	completion;
+	unsigned long		wakeup_count;
 #endif
 #ifdef CONFIG_PM_RUNTIME
 	struct timer_list	suspend_timer;
@@ -476,9 +477,15 @@ struct dev_pm_info {
 	enum rpm_request	request;
 	enum rpm_status		runtime_status;
 	int			runtime_error;
+	unsigned long		active_jiffies;
+	unsigned long		suspended_jiffies;
+	unsigned long		accounting_timestamp;
 #endif
 };
 
+extern void update_pm_runtime_accounting(struct device *dev);
+
+
 /*
  * The PM_EVENT_ messages are also used by drivers implementing the legacy
  * suspend framework, based on the ->suspend() and ->resume() callbacks common
@@ -552,6 +559,11 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 	} while (0)
 
 extern void device_pm_wait_for_dev(struct device *sub, struct device *dev);
+
+/* drivers/base/power/wakeup.c */
+extern void pm_wakeup_event(struct device *dev, unsigned int msec);
+extern void pm_stay_awake(struct device *dev);
+extern void pm_relax(void);
 #else /* !CONFIG_PM_SLEEP */
 
 #define device_pm_lock() do {} while (0)
@@ -565,6 +577,10 @@ static inline int dpm_suspend_start(pm_message_t state)
 #define suspend_report_result(fn, ret)		do {} while (0)
 
 static inline void device_pm_wait_for_dev(struct device *a, struct device *b) {}
+
+static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {}
+static inline void pm_stay_awake(struct device *dev) {}
+static inline void pm_relax(void) {}
 #endif /* !CONFIG_PM_SLEEP */
 
 /* How to reorder dpm_list after device_move() */
diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h
index 8ba440e5eb7..77cbddb3784 100644
--- a/include/linux/pm_qos_params.h
+++ b/include/linux/pm_qos_params.h
@@ -1,8 +1,10 @@
+#ifndef _LINUX_PM_QOS_PARAMS_H
+#define _LINUX_PM_QOS_PARAMS_H
 /* interface for the pm_qos_power infrastructure of the linux kernel.
  *
  * Mark Gross <mgross@linux.intel.com>
  */
-#include <linux/list.h>
+#include <linux/plist.h>
 #include <linux/notifier.h>
 #include <linux/miscdevice.h>
 
@@ -14,9 +16,12 @@
 #define PM_QOS_NUM_CLASSES 4
 #define PM_QOS_DEFAULT_VALUE -1
 
-struct pm_qos_request_list;
+struct pm_qos_request_list {
+	struct plist_node list;
+	int pm_qos_class;
+};
 
-struct pm_qos_request_list *pm_qos_add_request(int pm_qos_class, s32 value);
+void pm_qos_add_request(struct pm_qos_request_list *l, int pm_qos_class, s32 value);
 void pm_qos_update_request(struct pm_qos_request_list *pm_qos_req,
 		s32 new_value);
 void pm_qos_remove_request(struct pm_qos_request_list *pm_qos_req);
@@ -24,4 +29,6 @@ void pm_qos_remove_request(struct pm_qos_request_list *pm_qos_req);
 int pm_qos_request(int pm_qos_class);
 int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier);
 int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier);
+int pm_qos_request_active(struct pm_qos_request_list *req);
 
+#endif
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index 22d64c18056..76aca48722a 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -29,8 +29,11 @@
 
 #ifdef CONFIG_PM
 
-/* changes to device_may_wakeup take effect on the next pm state change.
- * by default, devices should wakeup if they can.
+/* Changes to device_may_wakeup take effect on the next pm state change.
+ *
+ * By default, most devices should leave wakeup disabled.  The exceptions
+ * are devices that everyone expects to be wakeup sources: keyboards,
+ * power buttons, possibly network interfaces, etc.
  */
 static inline void device_init_wakeup(struct device *dev, bool val)
 {
@@ -59,7 +62,7 @@ static inline bool device_may_wakeup(struct device *dev)
 
 #else /* !CONFIG_PM */
 
-/* For some reason the next two routines work even without CONFIG_PM */
+/* For some reason the following routines work even without CONFIG_PM */
 static inline void device_init_wakeup(struct device *dev, bool val)
 {
 	dev->power.can_wakeup = val;
@@ -67,6 +70,7 @@ static inline void device_init_wakeup(struct device *dev, bool val)
 
 static inline void device_set_wakeup_capable(struct device *dev, bool capable)
 {
+	dev->power.can_wakeup = capable;
 }
 
 static inline bool device_can_wakeup(struct device *dev)
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 7c4193eb007..1bc1338b817 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -414,6 +414,7 @@ struct pnp_protocol {
 	int (*disable) (struct pnp_dev *dev);
 
 	/* protocol specific suspend/resume */
+	bool (*can_wakeup) (struct pnp_dev *dev);
 	int (*suspend) (struct pnp_dev * dev, pm_message_t state);
 	int (*resume) (struct pnp_dev * dev);
 
diff --git a/drivers/staging/rar_register/rar_register.h b/include/linux/rar_register.h
index ffa805780f8..ffa805780f8 100644
--- a/drivers/staging/rar_register/rar_register.h
+++ b/include/linux/rar_register.h
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index fe1872e5b37..7066acb2c53 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -110,7 +110,6 @@ struct rb_node
 struct rb_root
 {
 	struct rb_node *rb_node;
-	void (*augment_cb)(struct rb_node *node);
 };
 
 
@@ -130,9 +129,7 @@ static inline void rb_set_color(struct rb_node *rb, int color)
 	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
 }
 
-#define RB_ROOT	(struct rb_root) { NULL, NULL, }
-#define RB_AUGMENT_ROOT(x)	(struct rb_root) { NULL, x}
-
+#define RB_ROOT	(struct rb_root) { NULL, }
 #define	rb_entry(ptr, type, member) container_of(ptr, type, member)
 
 #define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
@@ -142,6 +139,14 @@ static inline void rb_set_color(struct rb_node *rb, int color)
 extern void rb_insert_color(struct rb_node *, struct rb_root *);
 extern void rb_erase(struct rb_node *, struct rb_root *);
 
+typedef void (*rb_augment_f)(struct rb_node *node, void *data);
+
+extern void rb_augment_insert(struct rb_node *node,
+			      rb_augment_f func, void *data);
+extern struct rb_node *rb_augment_erase_begin(struct rb_node *node);
+extern void rb_augment_erase_end(struct rb_node *node,
+				 rb_augment_f func, void *data);
+
 /* Find logical next and previous nodes in a tree */
 extern struct rb_node *rb_next(const struct rb_node *);
 extern struct rb_node *rb_prev(const struct rb_node *);
diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644
index 00000000000..4892f591bab
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h  --  Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ *	output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+	bool defdcdc_default;
+};
+
+#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index f118809c953..0478888c689 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -139,7 +139,7 @@ extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
@@ -214,6 +214,7 @@ extern char ___assert_task_state[1 - 2*!!(
 
 #define task_is_traced(task)	((task->state & __TASK_TRACED) != 0)
 #define task_is_stopped(task)	((task->state & __TASK_STOPPED) != 0)
+#define task_is_dead(task)	((task)->exit_state != 0)
 #define task_is_stopped_or_traced(task)	\
 			((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
 #define task_contributes_to_load(task)	\
diff --git a/include/linux/security.h b/include/linux/security.h
index 0c881917046..723a93df756 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -470,8 +470,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
  * @path_truncate:
  *	Check permission before truncating a file.
  *	@path contains the path structure for the file.
- *	@length is the new length of the file.
- *	@time_attrs is the flags passed to do_truncate().
  *	Return 0 if permission is granted.
  * @inode_getattr:
  *	Check permission before obtaining file attributes.
@@ -1412,8 +1410,7 @@ struct security_operations {
 	int (*path_rmdir) (struct path *dir, struct dentry *dentry);
 	int (*path_mknod) (struct path *dir, struct dentry *dentry, int mode,
 			   unsigned int dev);
-	int (*path_truncate) (struct path *path, loff_t length,
-			      unsigned int time_attrs);
+	int (*path_truncate) (struct path *path);
 	int (*path_symlink) (struct path *dir, struct dentry *dentry,
 			     const char *old_name);
 	int (*path_link) (struct dentry *old_dentry, struct path *new_dir,
@@ -2806,8 +2803,7 @@ int security_path_mkdir(struct path *dir, struct dentry *dentry, int mode);
 int security_path_rmdir(struct path *dir, struct dentry *dentry);
 int security_path_mknod(struct path *dir, struct dentry *dentry, int mode,
 			unsigned int dev);
-int security_path_truncate(struct path *path, loff_t length,
-			   unsigned int time_attrs);
+int security_path_truncate(struct path *path);
 int security_path_symlink(struct path *dir, struct dentry *dentry,
 			  const char *old_name);
 int security_path_link(struct dentry *old_dentry, struct path *new_dir,
@@ -2841,8 +2837,7 @@ static inline int security_path_mknod(struct path *dir, struct dentry *dentry,
 	return 0;
 }
 
-static inline int security_path_truncate(struct path *path, loff_t length,
-					 unsigned int time_attrs)
+static inline int security_path_truncate(struct path *path)
 {
 	return 0;
 }
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index f5364a1de68..baed2122c5a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -2,9 +2,7 @@
 #define __LINUX_SERIAL_SCI_H
 
 #include <linux/serial_core.h>
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-#include <asm/dmaengine.h>
-#endif
+#include <linux/sh_dma.h>
 
 /*
  * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index b4ae570d3c9..92bd0839d5b 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -48,11 +48,12 @@ struct ads7846_platform_data {
 					 * state if get_pendown_state == NULL
 					 */
 	int	(*get_pendown_state)(void);
-	int	(*filter_init)	(struct ads7846_platform_data *pdata,
+	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
 				 void **filter_data);
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
 	void	(*wait_for_sync)(void);
 	bool	wakeup;
+	unsigned long irq_flags;
 };
 
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 89fac6a3f78..f8854655860 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -60,7 +60,7 @@
 /*
  * Must define these before including other files, inline functions need them
  */
-#define LOCK_SECTION_NAME ".text.lock."KBUILD_BASENAME
+#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME
 
 #define LOCK_SECTION_START(extra)               \
         ".subsection 1\n\t"                     \
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5e781d824e6..4af270ec220 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -61,14 +61,15 @@ typedef int __bitwise suspend_state_t;
  *	before device drivers' late suspend callbacks are executed.  It returns
  *	0 on success or a negative error code otherwise, in which case the
  *	system cannot enter the desired sleep state (@prepare_late(), @enter(),
- *	@wake(), and @finish() will not be called in that case).
+ *	and @wake() will not be called in that case).
  *
  * @prepare_late: Finish preparing the platform for entering the system sleep
  *	state indicated by @begin().
  *	@prepare_late is called before disabling nonboot CPUs and after
  *	device drivers' late suspend callbacks have been executed.  It returns
  *	0 on success or a negative error code otherwise, in which case the
- *	system cannot enter the desired sleep state (@enter() and @wake()).
+ *	system cannot enter the desired sleep state (@enter() will not be
+ *	executed).
  *
  * @enter: Enter the system sleep state indicated by @begin() or represented by
  *	the argument if @begin() is not implemented.
@@ -81,14 +82,15 @@ typedef int __bitwise suspend_state_t;
  *	resume callbacks are executed.
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @prepare_late().  If implemented, it is always called
- *	after @enter(), even if @enter() fails.
+ *	after @prepare_late and @enter(), even if one of them fails.
  *
  * @finish: Finish wake-up of the platform.
  *	@finish is called right prior to calling device drivers' regular suspend
  *	callbacks.
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @prepare().  If implemented, it is always called after
- *	@enter() and @wake(), if implemented, even if any of them fails.
+ *	@enter() and @wake(), even if any of them fails.  It is executed after
+ *	a failing @prepare.
  *
  * @end: Called by the PM core right after resuming devices, to indicate to
  *	the platform that the system has returned to the working state or
@@ -256,22 +258,22 @@ static inline int hibernate(void) { return -ENOSYS; }
 static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
-#ifdef CONFIG_HIBERNATION_NVS
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
-#else /* CONFIG_HIBERNATION_NVS */
-static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
+#ifdef CONFIG_SUSPEND_NVS
+extern int suspend_nvs_register(unsigned long start, unsigned long size);
+extern int suspend_nvs_alloc(void);
+extern void suspend_nvs_free(void);
+extern void suspend_nvs_save(void);
+extern void suspend_nvs_restore(void);
+#else /* CONFIG_SUSPEND_NVS */
+static inline int suspend_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
 }
-static inline int hibernate_nvs_alloc(void) { return 0; }
-static inline void hibernate_nvs_free(void) {}
-static inline void hibernate_nvs_save(void) {}
-static inline void hibernate_nvs_restore(void) {}
-#endif /* CONFIG_HIBERNATION_NVS */
+static inline int suspend_nvs_alloc(void) { return 0; }
+static inline void suspend_nvs_free(void) {}
+static inline void suspend_nvs_save(void) {}
+static inline void suspend_nvs_restore(void) {}
+#endif /* CONFIG_SUSPEND_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
@@ -286,6 +288,13 @@ extern int unregister_pm_notifier(struct notifier_block *nb);
 		{ .notifier_call = fn, .priority = pri };	\
 	register_pm_notifier(&fn##_nb);			\
 }
+
+/* drivers/base/power/wakeup.c */
+extern bool events_check_enabled;
+
+extern bool pm_check_wakeup_events(void);
+extern bool pm_get_wakeup_count(unsigned long *count);
+extern bool pm_save_wakeup_count(unsigned long count);
 #else /* !CONFIG_PM_SLEEP */
 
 static inline int register_pm_notifier(struct notifier_block *nb)
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index 81a4e213c6c..8c0e349f4a6 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -23,6 +23,29 @@ extern int swiotlb_force;
 #define IO_TLB_SHIFT 11
 
 extern void swiotlb_init(int verbose);
+extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
+
+/*
+ * Enumeration for sync targets
+ */
+enum dma_sync_target {
+	SYNC_FOR_CPU = 0,
+	SYNC_FOR_DEVICE = 1,
+};
+extern void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr,
+				    phys_addr_t phys, size_t size,
+				    enum dma_data_direction dir);
+
+extern void swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr,
+				     size_t size, enum dma_data_direction dir);
+
+extern void swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr,
+				    size_t size, enum dma_data_direction dir,
+				    enum dma_sync_target target);
+
+/* Accessory functions. */
+extern void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
+			   enum dma_data_direction dir);
 
 extern void
 *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -42,11 +65,11 @@ extern void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 
 extern int
 swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-	       int direction);
+	       enum dma_data_direction dir);
 
 extern void
 swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-		 int direction);
+		 enum dma_data_direction dir);
 
 extern int
 swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a1a86a53bc7..13ebb5413a7 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -124,7 +124,8 @@ extern struct trace_event_functions enter_syscall_print_funcs;
 extern struct trace_event_functions exit_syscall_print_funcs;
 
 #define SYSCALL_TRACE_ENTER_EVENT(sname)				\
-	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct syscall_metadata					\
+	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
 	static struct ftrace_event_call					\
 	__attribute__((__aligned__(4))) event_enter_##sname;		\
 	static struct ftrace_event_call __used				\
@@ -138,7 +139,8 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 	}
 
 #define SYSCALL_TRACE_EXIT_EVENT(sname)					\
-	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct syscall_metadata					\
+	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
 	static struct ftrace_event_call					\
 	__attribute__((__aligned__(4))) event_exit_##sname;		\
 	static struct ftrace_event_call __used				\
@@ -289,7 +291,7 @@ asmlinkage long sys_capget(cap_user_header_t header,
 				cap_user_data_t dataptr);
 asmlinkage long sys_capset(cap_user_header_t header,
 				const cap_user_data_t data);
-asmlinkage long sys_personality(u_long personality);
+asmlinkage long sys_personality(unsigned int personality);
 
 asmlinkage long sys_sigpending(old_sigset_t __user *set);
 asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 4496322e28d..609e8ca5f53 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -45,6 +45,7 @@ struct sysrq_key_op {
  */
 
 void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
 int register_sysrq_key(int key, struct sysrq_key_op *op);
 int unregister_sysrq_key(int key, struct sysrq_key_op *op);
 struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ea965b857a5..38cf093ef62 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -100,6 +100,13 @@ void init_timer_deferrable_key(struct timer_list *timer,
 		setup_timer_on_stack_key((timer), #timer, &__key,	\
 					 (fn), (data));			\
 	} while (0)
+#define setup_deferrable_timer_on_stack(timer, fn, data)		\
+	do {								\
+		static struct lock_class_key __key;			\
+		setup_deferrable_timer_on_stack_key((timer), #timer,	\
+						    &__key, (fn),	\
+						    (data));		\
+	} while (0)
 #else
 #define init_timer(timer)\
 	init_timer_key((timer), NULL, NULL)
@@ -111,6 +118,8 @@ void init_timer_deferrable_key(struct timer_list *timer,
 	setup_timer_key((timer), NULL, NULL, (fn), (data))
 #define setup_timer_on_stack(timer, fn, data)\
 	setup_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
+#define setup_deferrable_timer_on_stack(timer, fn, data)\
+	setup_deferrable_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
 #endif
 
 #ifdef CONFIG_DEBUG_OBJECTS_TIMERS
@@ -150,6 +159,12 @@ static inline void setup_timer_on_stack_key(struct timer_list *timer,
 	init_timer_on_stack_key(timer, name, key);
 }
 
+extern void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
+						const char *name,
+						struct lock_class_key *key,
+						void (*function)(unsigned long),
+						unsigned long data);
+
 /**
  * timer_pending - is a timer pending?
  * @timer: the timer in question
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 9a59d1f98cd..103d1b61aac 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -14,6 +14,7 @@
  * See the file COPYING for more details.
  */
 
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/rcupdate.h>
 
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 92f1d99f0f1..383b94ba8c2 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,16 @@
 /* v1.0 and v2.0 of this standard have many things in common. For the rest
  * of the definitions, please refer to audio.h */
 
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x2;
+}
+
 /* 4.7.2.1 Clock Source Descriptor */
 
 struct uac_clock_source_descriptor {
@@ -31,6 +41,13 @@ struct uac_clock_source_descriptor {
 	__u8 iClockSource;
 } __attribute__((packed));
 
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT	0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED	0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR	0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG	0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF	(1 << 2)
+
 /* 4.7.2.2 Clock Source Descriptor */
 
 struct uac_clock_selector_descriptor {
@@ -39,8 +56,20 @@ struct uac_clock_selector_descriptor {
 	__u8 bDescriptorSubtype;
 	__u8 bClockID;
 	__u8 bNrInPins;
-	__u8 bmControls;
 	__u8 baCSourceID[];
+	/* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bClockID;
+	__u8 bCSourceID;
+	__u8 bmControls;
+	__u8 iClockMultiplier;
 } __attribute__((packed));
 
 /* 4.7.2.4 Input terminal descriptor */
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 5d646c38875..c51200c715e 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -47,6 +47,15 @@
 #define UAC_FORMAT_TYPE			0x02
 #define UAC_FORMAT_SPECIFIC		0x03
 
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED		0x00
+#define UAC_PROCESS_UP_DOWNMIX		0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC	0x02
+#define UAC_PROCESS_STEREO_EXTENDER	0x03
+#define UAC_PROCESS_REVERB		0x04
+#define UAC_PROCESS_CHORUS		0x05
+#define UAC_PROCESS_DYN_RANGE_COMP	0x06
+
 /* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
 #define UAC_EP_GENERAL			0x01
 
@@ -73,6 +82,60 @@
 
 #define UAC_GET_STAT			0xff
 
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT		0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE			0x01
+#define UAC_FU_VOLUME			0x02
+#define UAC_FU_BASS			0x03
+#define UAC_FU_MID			0x04
+#define UAC_FU_TREBLE			0x05
+#define UAC_FU_GRAPHIC_EQUALIZER	0x06
+#define UAC_FU_AUTOMATIC_GAIN		0x07
+#define UAC_FU_DELAY			0x08
+#define UAC_FU_BASS_BOOST		0x09
+#define UAC_FU_LOUDNESS			0x0a
+
+#define UAC_CONTROL_BIT(CS)	(1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE			0x01
+#define UAC_UD_MODE_SELECT		0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE			0x01
+#define UAC_DP_MODE_SELECT		0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE			0x01
+#define UAC_3D_SPACE			0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE		0x01
+#define UAC_REVERB_LEVEL		0x02
+#define UAC_REVERB_TIME			0x03
+#define UAC_REVERB_FEEDBACK		0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE		0x01
+#define UAC_CHORUS_LEVEL		0x02
+#define UAC_CHORUS_RATE			0x03
+#define UAC_CHORUS_DEPTH		0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE			0x01
+#define UAC_DCR_RATE			0x02
+#define UAC_DCR_MAXAMPL			0x03
+#define UAC_DCR_THRESHOLD		0x04
+#define UAC_DCR_ATTACK_TIME		0x05
+#define UAC_DCR_RELEASE_TIME		0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE			0x01
+
 /* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
 #define UAC_MS_HEADER			0x01
 #define UAC_MIDI_IN_JACK		0x02
@@ -244,7 +307,7 @@ struct uac_selector_unit_descriptor {
 static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
 {
 	__u8 *raw = (__u8 *) desc;
-	return raw[9 + desc->bLength - 1];
+	return raw[desc->bLength - 1];
 }
 
 /* 4.3.2.5 Feature Unit Descriptor */
@@ -463,31 +526,6 @@ struct uac_iso_endpoint_descriptor {
 #define UAC_EP_CS_ATTR_PITCH_CONTROL	0x02
 #define UAC_EP_CS_ATTR_FILL_MAX		0x80
 
-/* A.10.2 Feature Unit Control Selectors */
-
-#define UAC_FU_CONTROL_UNDEFINED	0x00
-#define UAC_MUTE_CONTROL		0x01
-#define UAC_VOLUME_CONTROL		0x02
-#define UAC_BASS_CONTROL		0x03
-#define UAC_MID_CONTROL			0x04
-#define UAC_TREBLE_CONTROL		0x05
-#define UAC_GRAPHIC_EQUALIZER_CONTROL	0x06
-#define UAC_AUTOMATIC_GAIN_CONTROL	0x07
-#define UAC_DELAY_CONTROL		0x08
-#define UAC_BASS_BOOST_CONTROL		0x09
-#define UAC_LOUDNESS_CONTROL		0x0a
-
-#define UAC_FU_MUTE		(1 << (UAC_MUTE_CONTROL - 1))
-#define UAC_FU_VOLUME		(1 << (UAC_VOLUME_CONTROL - 1))
-#define UAC_FU_BASS		(1 << (UAC_BASS_CONTROL - 1))
-#define UAC_FU_MID		(1 << (UAC_MID_CONTROL - 1))
-#define UAC_FU_TREBLE		(1 << (UAC_TREBLE_CONTROL - 1))
-#define UAC_FU_GRAPHIC_EQ	(1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
-#define UAC_FU_AUTO_GAIN	(1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
-#define UAC_FU_DELAY		(1 << (UAC_DELAY_CONTROL - 1))
-#define UAC_FU_BASS_BOOST	(1 << (UAC_BASS_BOOST_CONTROL - 1))
-#define UAC_FU_LOUDNESS		(1 << (UAC_LOUDNESS_CONTROL - 1))
-
 /* status word format (3.7.1.1) */
 
 #define UAC1_STATUS_TYPE_ORIG_MASK		0x0f
diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h
index be436d9ee47..3b3b95e01f7 100644
--- a/include/linux/usb/video.h
+++ b/include/linux/usb/video.h
@@ -160,5 +160,409 @@
 #define UVC_STATUS_TYPE_CONTROL				1
 #define UVC_STATUS_TYPE_STREAMING			2
 
+/* 2.4.3.3. Payload Header Information */
+#define UVC_STREAM_EOH					(1 << 7)
+#define UVC_STREAM_ERR					(1 << 6)
+#define UVC_STREAM_STI					(1 << 5)
+#define UVC_STREAM_RES					(1 << 4)
+#define UVC_STREAM_SCR					(1 << 3)
+#define UVC_STREAM_PTS					(1 << 2)
+#define UVC_STREAM_EOF					(1 << 1)
+#define UVC_STREAM_FID					(1 << 0)
+
+/* 4.1.2. Control Capabilities */
+#define UVC_CONTROL_CAP_GET				(1 << 0)
+#define UVC_CONTROL_CAP_SET				(1 << 1)
+#define UVC_CONTROL_CAP_DISABLED			(1 << 2)
+#define UVC_CONTROL_CAP_AUTOUPDATE			(1 << 3)
+#define UVC_CONTROL_CAP_ASYNCHRONOUS			(1 << 4)
+
+/* ------------------------------------------------------------------------
+ * UVC structures
+ */
+
+/* All UVC descriptors have these 3 fields at the beginning */
+struct uvc_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+} __attribute__((packed));
+
+/* 3.7.2. Video Control Interface Header Descriptor */
+struct uvc_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 bcdUVC;
+	__u16 wTotalLength;
+	__u32 dwClockFrequency;
+	__u8  bInCollection;
+	__u8  baInterfaceNr[];
+} __attribute__((__packed__));
+
+#define UVC_DT_HEADER_SIZE(n)				(12+(n))
+
+#define UVC_HEADER_DESCRIPTOR(n) \
+	uvc_header_descriptor_##n
+
+#define DECLARE_UVC_HEADER_DESCRIPTOR(n)		\
+struct UVC_HEADER_DESCRIPTOR(n) {			\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u16 bcdUVC;					\
+	__u16 wTotalLength;				\
+	__u32 dwClockFrequency;				\
+	__u8  bInCollection;				\
+	__u8  baInterfaceNr[n];				\
+} __attribute__ ((packed))
+
+/* 3.7.2.1. Input Terminal Descriptor */
+struct uvc_input_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_TERMINAL_SIZE			8
+
+/* 3.7.2.2. Output Terminal Descriptor */
+struct uvc_output_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  bSourceID;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_TERMINAL_SIZE			9
+
+/* 3.7.2.3. Camera Terminal Descriptor */
+struct uvc_camera_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+	__u16 wObjectiveFocalLengthMin;
+	__u16 wObjectiveFocalLengthMax;
+	__u16 wOcularFocalLength;
+	__u8  bControlSize;
+	__u8  bmControls[3];
+} __attribute__((__packed__));
+
+#define UVC_DT_CAMERA_TERMINAL_SIZE(n)			(15+(n))
+
+/* 3.7.2.4. Selector Unit Descriptor */
+struct uvc_selector_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  iSelector;
+} __attribute__((__packed__));
+
+#define UVC_DT_SELECTOR_UNIT_SIZE(n)			(6+(n))
+
+#define UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
+	uvc_selector_unit_descriptor_##n
+
+#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
+struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bUnitID;					\
+	__u8  bNrInPins;				\
+	__u8  baSourceID[n];				\
+	__u8  iSelector;				\
+} __attribute__ ((packed))
+
+/* 3.7.2.5. Processing Unit Descriptor */
+struct uvc_processing_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bSourceID;
+	__u16 wMaxMultiplier;
+	__u8  bControlSize;
+	__u8  bmControls[2];
+	__u8  iProcessing;
+} __attribute__((__packed__));
+
+#define UVC_DT_PROCESSING_UNIT_SIZE(n)			(9+(n))
+
+/* 3.7.2.6. Extension Unit Descriptor */
+struct uvc_extension_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  guidExtensionCode[16];
+	__u8  bNumControls;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  bControlSize;
+	__u8  bmControls[0];
+	__u8  iExtension;
+} __attribute__((__packed__));
+
+#define UVC_DT_EXTENSION_UNIT_SIZE(p, n)		(24+(p)+(n))
+
+#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+	uvc_extension_unit_descriptor_##p_##n
+
+#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n)	\
+struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bUnitID;					\
+	__u8  guidExtensionCode[16];			\
+	__u8  bNumControls;				\
+	__u8  bNrInPins;				\
+	__u8  baSourceID[p];				\
+	__u8  bControlSize;				\
+	__u8  bmControls[n];				\
+	__u8  iExtension;				\
+} __attribute__ ((packed))
+
+/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
+struct uvc_control_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 wMaxTransferSize;
+} __attribute__((__packed__));
+
+#define UVC_DT_CONTROL_ENDPOINT_SIZE			5
+
+/* 3.9.2.1. Input Header Descriptor */
+struct uvc_input_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bmInfo;
+	__u8  bTerminalLink;
+	__u8  bStillCaptureMethod;
+	__u8  bTriggerSupport;
+	__u8  bTriggerUsage;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_HEADER_SIZE(n, p)			(13+(n*p))
+
+#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_input_header_descriptor_##n_##p
+
+#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p)	\
+struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bNumFormats;				\
+	__u16 wTotalLength;				\
+	__u8  bEndpointAddress;				\
+	__u8  bmInfo;					\
+	__u8  bTerminalLink;				\
+	__u8  bStillCaptureMethod;			\
+	__u8  bTriggerSupport;				\
+	__u8  bTriggerUsage;				\
+	__u8  bControlSize;				\
+	__u8  bmaControls[p][n];			\
+} __attribute__ ((packed))
+
+/* 3.9.2.2. Output Header Descriptor */
+struct uvc_output_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bTerminalLink;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_HEADER_SIZE(n, p)			(9+(n*p))
+
+#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_output_header_descriptor_##n_##p
+
+#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p)	\
+struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bNumFormats;				\
+	__u16 wTotalLength;				\
+	__u8  bEndpointAddress;				\
+	__u8  bTerminalLink;				\
+	__u8  bControlSize;				\
+	__u8  bmaControls[p][n];			\
+} __attribute__ ((packed))
+
+/* 3.9.2.6. Color matching descriptor */
+struct uvc_color_matching_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bColorPrimaries;
+	__u8  bTransferCharacteristics;
+	__u8  bMatrixCoefficients;
+} __attribute__((__packed__));
+
+#define UVC_DT_COLOR_MATCHING_SIZE			6
+
+/* 4.3.1.1. Video Probe and Commit Controls */
+struct uvc_streaming_control {
+	__u16 bmHint;
+	__u8  bFormatIndex;
+	__u8  bFrameIndex;
+	__u32 dwFrameInterval;
+	__u16 wKeyFrameRate;
+	__u16 wPFrameRate;
+	__u16 wCompQuality;
+	__u16 wCompWindowSize;
+	__u16 wDelay;
+	__u32 dwMaxVideoFrameSize;
+	__u32 dwMaxPayloadTransferSize;
+	__u32 dwClockFrequency;
+	__u8  bmFramingInfo;
+	__u8  bPreferedVersion;
+	__u8  bMinVersion;
+	__u8  bMaxVersion;
+} __attribute__((__packed__));
+
+/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
+struct uvc_format_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  guidFormat[16];
+	__u8  bBitsPerPixel;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE			27
+
+/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
+struct uvc_frame_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n)		(26+4*(n))
+
+#define UVC_FRAME_UNCOMPRESSED(n) \
+	uvc_frame_uncompressed_##n
+
+#define DECLARE_UVC_FRAME_UNCOMPRESSED(n)		\
+struct UVC_FRAME_UNCOMPRESSED(n) {			\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bFrameIndex;				\
+	__u8  bmCapabilities;				\
+	__u16 wWidth;					\
+	__u16 wHeight;					\
+	__u32 dwMinBitRate;				\
+	__u32 dwMaxBitRate;				\
+	__u32 dwMaxVideoFrameBufferSize;		\
+	__u32 dwDefaultFrameInterval;			\
+	__u8  bFrameIntervalType;			\
+	__u32 dwFrameInterval[n];			\
+} __attribute__ ((packed))
+
+/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
+struct uvc_format_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  bmFlags;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_MJPEG_SIZE			11
+
+/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
+struct uvc_frame_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_MJPEG_SIZE(n)			(26+4*(n))
+
+#define UVC_FRAME_MJPEG(n) \
+	uvc_frame_mjpeg_##n
+
+#define DECLARE_UVC_FRAME_MJPEG(n)			\
+struct UVC_FRAME_MJPEG(n) {				\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bFrameIndex;				\
+	__u8  bmCapabilities;				\
+	__u16 wWidth;					\
+	__u16 wHeight;					\
+	__u32 dwMinBitRate;				\
+	__u32 dwMaxBitRate;				\
+	__u32 dwMaxVideoFrameBufferSize;		\
+	__u32 dwDefaultFrameInterval;			\
+	__u8  bFrameIntervalType;			\
+	__u32 dwFrameInterval[n];			\
+} __attribute__ ((packed))
+
 #endif /* __LINUX_USB_VIDEO_H */
 
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index 2dfaa293ae8..814f294d4cd 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -5,9 +5,31 @@
  * (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
  * (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
  * (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS
+ * IN THE SOFTWARE.
+ *
  */
 
 #ifndef LINUX_VGA_H
+#define LINUX_VGA_H
 
 #include <asm/vga.h>
 
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 5cf11765146..395c38a47ad 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -4,6 +4,7 @@
  * compatible drivers/servers. */
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
+#include <linux/types.h>
 
 /* The feature bitmap for virtio 9P */
 
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index cc97d6caf2b..c24eca71e80 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -27,10 +27,6 @@ enum writeback_sync_modes {
  * in a manner such that unspecified fields are set to zero.
  */
 struct writeback_control {
-	struct backing_dev_info *bdi;	/* If !NULL, only write back this
-					   queue */
-	struct super_block *sb;		/* if !NULL, only write inodes from
-					   this super_block */
 	enum writeback_sync_modes sync_mode;
 	unsigned long *older_than_this;	/* If !NULL, only write back inodes
 					   older than this */
@@ -56,24 +52,6 @@ struct writeback_control {
 	unsigned for_reclaim:1;		/* Invoked from the page allocator */
 	unsigned range_cyclic:1;	/* range_start is cyclic */
 	unsigned more_io:1;		/* more io to be dispatched */
-	/*
-	 * write_cache_pages() won't update wbc->nr_to_write and
-	 * mapping->writeback_index if no_nrwrite_index_update
-	 * is set.  write_cache_pages() may write more than we
-	 * requested and we want to make sure nr_to_write and
-	 * writeback_index are updated in a consistent manner
-	 * so we use a single control to update them
-	 */
-	unsigned no_nrwrite_index_update:1;
-
-	/*
-	 * For WB_SYNC_ALL, the sb must always be pinned. For WB_SYNC_NONE,
-	 * the writeback code will pin the sb for the caller. However,
-	 * for eg umount, the caller does WB_SYNC_NONE but already has
-	 * the sb pinned. If the below is set, caller already has the
-	 * sb pinned.
-	 */
-	unsigned sb_pinned:1;
 };
 
 /*
@@ -82,10 +60,10 @@ struct writeback_control {
 struct bdi_writeback;
 int inode_wait(void *);
 void writeback_inodes_sb(struct super_block *);
-void writeback_inodes_sb_locked(struct super_block *);
 int writeback_inodes_sb_if_idle(struct super_block *);
 void sync_inodes_sb(struct super_block *);
-void writeback_inodes_wbc(struct writeback_control *wbc);
+void writeback_inodes_wb(struct bdi_writeback *wb,
+		struct writeback_control *wbc);
 long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
 void wakeup_flusher_threads(long nr_pages);
 
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index 0cfa1e9c4cc..f1e5bde4b35 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -33,6 +33,20 @@
 #define XATTR_USER_PREFIX "user."
 #define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
 
+/* Security namespace */
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
 struct inode;
 struct dentry;
 
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index fd882261225..9696a5e2c43 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -799,7 +799,7 @@ do {									\
 		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
 	X##_e = rsize - X##_e - 1;					\
 									\
-	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e)	\
+	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e)	\
 	  __FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
 	_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize);			\
 	if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0)			\
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index ad1303f20e0..513e60dd101 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -47,15 +47,21 @@ enum rc_driver_type {
  *	is opened.
  * @close: callback to allow drivers to disable polling/irq when IR input device
  *	is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @tx_ir: transmit IR
  */
 struct ir_dev_props {
 	enum rc_driver_type	driver_type;
 	unsigned long		allowed_protos;
 	u32			scanmask;
-	void 			*priv;
+	void			*priv;
 	int			(*change_protocol)(void *priv, u64 ir_type);
 	int			(*open)(void *priv);
 	void			(*close)(void *priv);
+	int			(*s_tx_mask)(void *priv, u32 mask);
+	int			(*s_tx_carrier)(void *priv, u32 carrier);
+	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
 };
 
 struct ir_input_dev {
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 0506e45c9a4..5e96d7a430b 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -11,7 +11,7 @@ struct IR_i2c {
 	struct i2c_client      *c;
 	struct input_dev       *input;
 	struct ir_input_state  ir;
-
+	u64                    ir_type;
 	/* Used to avoid fast repeating */
 	unsigned char          old;
 
diff --git a/include/media/lirc.h b/include/media/lirc.h
new file mode 100644
index 00000000000..42c467c5051
--- /dev/null
+++ b/include/media/lirc.h
@@ -0,0 +1,165 @@
+/*
+ * lirc.h - linux infrared remote control header file
+ * last modified 2010/07/13 by Jarod Wilson
+ */
+
+#ifndef _LINUX_LIRC_H
+#define _LINUX_LIRC_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define PULSE_BIT       0x01000000
+#define PULSE_MASK      0x00FFFFFF
+
+#define LIRC_MODE2_SPACE     0x00000000
+#define LIRC_MODE2_PULSE     0x01000000
+#define LIRC_MODE2_FREQUENCY 0x02000000
+#define LIRC_MODE2_TIMEOUT   0x03000000
+
+#define LIRC_VALUE_MASK      0x00FFFFFF
+#define LIRC_MODE2_MASK      0xFF000000
+
+#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
+#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
+#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
+#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+
+#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
+#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
+
+#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
+#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
+#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
+#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+
+/* used heavily by lirc userspace */
+#define lirc_t int
+
+/*** lirc compatible hardware features ***/
+
+#define LIRC_MODE2SEND(x) (x)
+#define LIRC_SEND2MODE(x) (x)
+#define LIRC_MODE2REC(x) ((x) << 16)
+#define LIRC_REC2MODE(x) ((x) >> 16)
+
+#define LIRC_MODE_RAW                  0x00000001
+#define LIRC_MODE_PULSE                0x00000002
+#define LIRC_MODE_MODE2                0x00000004
+#define LIRC_MODE_LIRCCODE             0x00000010
+
+
+#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
+#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
+#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
+#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_SEND_MASK             0x0000003f
+
+#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
+#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
+#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
+
+#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
+#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
+#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
+#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
+
+#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
+#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
+
+#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
+#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
+#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
+#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
+#define LIRC_CAN_SET_REC_FILTER           0x08000000
+
+#define LIRC_CAN_MEASURE_CARRIER          0x02000000
+
+#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
+#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
+
+#define LIRC_CAN_NOTIFY_DECODE            0x01000000
+
+/*** IOCTL commands for lirc driver ***/
+
+#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
+
+#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
+#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
+#define LIRC_GET_SEND_CARRIER          _IOR('i', 0x00000003, __u32)
+#define LIRC_GET_REC_CARRIER           _IOR('i', 0x00000004, __u32)
+#define LIRC_GET_SEND_DUTY_CYCLE       _IOR('i', 0x00000005, __u32)
+#define LIRC_GET_REC_DUTY_CYCLE        _IOR('i', 0x00000006, __u32)
+#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
+
+#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
+#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
+
+#define LIRC_GET_MIN_FILTER_PULSE      _IOR('i', 0x0000000a, __u32)
+#define LIRC_GET_MAX_FILTER_PULSE      _IOR('i', 0x0000000b, __u32)
+#define LIRC_GET_MIN_FILTER_SPACE      _IOR('i', 0x0000000c, __u32)
+#define LIRC_GET_MAX_FILTER_SPACE      _IOR('i', 0x0000000d, __u32)
+
+/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
+#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
+
+#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
+#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
+/* Note: these can reset the according pulse_width */
+#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
+#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
+#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
+#define LIRC_SET_REC_DUTY_CYCLE        _IOW('i', 0x00000016, __u32)
+#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
+
+/*
+ * when a timeout != 0 is set the driver will send a
+ * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
+ * never sent, timeout is disabled by default
+ */
+#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
+
+/* 1 enables, 0 disables timeout reports in MODE2 */
+#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
+
+/*
+ * pulses shorter than this are filtered out by hardware (software
+ * emulation in lirc_dev?)
+ */
+#define LIRC_SET_REC_FILTER_PULSE      _IOW('i', 0x0000001a, __u32)
+/*
+ * spaces shorter than this are filtered out by hardware (software
+ * emulation in lirc_dev?)
+ */
+#define LIRC_SET_REC_FILTER_SPACE      _IOW('i', 0x0000001b, __u32)
+/*
+ * if filter cannot be set independantly for pulse/space, this should
+ * be used
+ */
+#define LIRC_SET_REC_FILTER            _IOW('i', 0x0000001c, __u32)
+
+/*
+ * if enabled from the next key press on the driver will send
+ * LIRC_MODE2_FREQUENCY packets
+ */
+#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, __u32)
+
+/*
+ * to set a range use
+ * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the
+ * lower bound first and later
+ * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound
+ */
+
+#define LIRC_SET_REC_DUTY_CYCLE_RANGE  _IOW('i', 0x0000001e, __u32)
+#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
+
+#define LIRC_NOTIFY_DECODE             _IO('i', 0x00000020)
+
+#define LIRC_SETUP_START               _IO('i', 0x00000021)
+#define LIRC_SETUP_END                 _IO('i', 0x00000022)
+
+#endif
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
new file mode 100644
index 00000000000..b1f60663cb3
--- /dev/null
+++ b/include/media/lirc_dev.h
@@ -0,0 +1,225 @@
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ *        This code is licensed under GNU GPL
+ *
+ */
+
+#ifndef _LINUX_LIRC_DEV_H
+#define _LINUX_LIRC_DEV_H
+
+#define MAX_IRCTL_DEVICES 4
+#define BUFLEN            16
+
+#define mod(n, div) ((n) % (div))
+
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/kfifo.h>
+#include <media/lirc.h>
+
+struct lirc_buffer {
+	wait_queue_head_t wait_poll;
+	spinlock_t fifo_lock;
+	unsigned int chunk_size;
+	unsigned int size; /* in chunks */
+	/* Using chunks instead of bytes pretends to simplify boundary checking
+	 * And should allow for some performance fine tunning later */
+	struct kfifo fifo;
+	u8 fifo_initialized;
+};
+
+static inline void lirc_buffer_clear(struct lirc_buffer *buf)
+{
+	unsigned long flags;
+
+	if (buf->fifo_initialized) {
+		spin_lock_irqsave(&buf->fifo_lock, flags);
+		kfifo_reset(&buf->fifo);
+		spin_unlock_irqrestore(&buf->fifo_lock, flags);
+	} else
+		WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+		     __func__);
+}
+
+static inline int lirc_buffer_init(struct lirc_buffer *buf,
+				    unsigned int chunk_size,
+				    unsigned int size)
+{
+	int ret;
+
+	init_waitqueue_head(&buf->wait_poll);
+	spin_lock_init(&buf->fifo_lock);
+	buf->chunk_size = chunk_size;
+	buf->size = size;
+	ret = kfifo_alloc(&buf->fifo, size * chunk_size, GFP_KERNEL);
+	if (ret == 0)
+		buf->fifo_initialized = 1;
+
+	return ret;
+}
+
+static inline void lirc_buffer_free(struct lirc_buffer *buf)
+{
+	if (buf->fifo_initialized) {
+		kfifo_free(&buf->fifo);
+		buf->fifo_initialized = 0;
+	} else
+		WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+		     __func__);
+}
+
+static inline int lirc_buffer_len(struct lirc_buffer *buf)
+{
+	int len;
+	unsigned long flags;
+
+	spin_lock_irqsave(&buf->fifo_lock, flags);
+	len = kfifo_len(&buf->fifo);
+	spin_unlock_irqrestore(&buf->fifo_lock, flags);
+
+	return len;
+}
+
+static inline int lirc_buffer_full(struct lirc_buffer *buf)
+{
+	return lirc_buffer_len(buf) == buf->size * buf->chunk_size;
+}
+
+static inline int lirc_buffer_empty(struct lirc_buffer *buf)
+{
+	return !lirc_buffer_len(buf);
+}
+
+static inline int lirc_buffer_available(struct lirc_buffer *buf)
+{
+	return buf->size - (lirc_buffer_len(buf) / buf->chunk_size);
+}
+
+static inline unsigned int lirc_buffer_read(struct lirc_buffer *buf,
+					    unsigned char *dest)
+{
+	unsigned int ret = 0;
+
+	if (lirc_buffer_len(buf) >= buf->chunk_size)
+		ret = kfifo_out_locked(&buf->fifo, dest, buf->chunk_size,
+				       &buf->fifo_lock);
+	return ret;
+
+}
+
+static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
+					     unsigned char *orig)
+{
+	unsigned int ret;
+
+	ret = kfifo_in_locked(&buf->fifo, orig, buf->chunk_size,
+			      &buf->fifo_lock);
+
+	return ret;
+}
+
+struct lirc_driver {
+	char name[40];
+	int minor;
+	unsigned long code_length;
+	unsigned int buffer_size; /* in chunks holding one code each */
+	int sample_rate;
+	unsigned long features;
+
+	unsigned int chunk_size;
+
+	void *data;
+	int min_timeout;
+	int max_timeout;
+	int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+	struct lirc_buffer *rbuf;
+	int (*set_use_inc) (void *data);
+	void (*set_use_dec) (void *data);
+	struct file_operations *fops;
+	struct device *dev;
+	struct module *owner;
+};
+
+/* name:
+ * this string will be used for logs
+ *
+ * minor:
+ * indicates minor device (/dev/lirc) number for registered driver
+ * if caller fills it with negative value, then the first free minor
+ * number will be used (if available)
+ *
+ * code_length:
+ * length of the remote control key code expressed in bits
+ *
+ * sample_rate:
+ *
+ * data:
+ * it may point to any driver data and this pointer will be passed to
+ * all callback functions
+ *
+ * add_to_buf:
+ * add_to_buf will be called after specified period of the time or
+ * triggered by the external event, this behavior depends on value of
+ * the sample_rate this function will be called in user context. This
+ * routine should return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ *
+ * rbuf:
+ * if not NULL, it will be used as a read buffer, you will have to
+ * write to the buffer by other means, like irq's (see also
+ * lirc_serial.c).
+ *
+ * set_use_inc:
+ * set_use_inc will be called after device is opened
+ *
+ * set_use_dec:
+ * set_use_dec will be called after device is closed
+ *
+ * fops:
+ * file_operations for drivers which don't fit the current driver model.
+ *
+ * Some ioctl's can be directly handled by lirc_dev if the driver's
+ * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
+ * lirc_serial.c).
+ *
+ * owner:
+ * the module owning this struct
+ *
+ */
+
+
+/* following functions can be called ONLY from user context
+ *
+ * returns negative value on error or minor number
+ * of the registered device if success
+ * contents of the structure pointed by p is copied
+ */
+extern int lirc_register_driver(struct lirc_driver *d);
+
+/* returns negative value on error or 0 if success
+*/
+extern int lirc_unregister_driver(int minor);
+
+/* Returns the private data stored in the lirc_driver
+ * associated with the given device file pointer.
+ */
+void *lirc_get_pdata(struct file *file);
+
+/* default file operations
+ * used by drivers if they override only some operations
+ */
+int lirc_dev_fop_open(struct inode *inode, struct file *file);
+int lirc_dev_fop_close(struct inode *inode, struct file *file);
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
+			  loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
+			   loff_t *ppos);
+
+#endif
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 5833966a710..9569d0863f8 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -17,8 +17,13 @@
 #define IR_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
 #define IR_TYPE_JVC	(1  << 3)	/* JVC protocol */
 #define IR_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
+#define IR_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
 #define IR_TYPE_OTHER	(1u << 31)
 
+#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC  | IR_TYPE_RC6  | \
+		     IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
+		     IR_TYPE_OTHER)
+
 struct ir_scancode {
 	u32	scancode;
 	u32	keycode;
@@ -55,7 +60,8 @@ void rc_map_init(void);
 #define RC_MAP_AVERMEDIA_A16D            "rc-avermedia-a16d"
 #define RC_MAP_AVERMEDIA_CARDBUS         "rc-avermedia-cardbus"
 #define RC_MAP_AVERMEDIA_DVBT            "rc-avermedia-dvbt"
-#define RC_MAP_AVERMEDIA_M135A_RM_JX     "rc-avermedia-m135a-rm-jx"
+#define RC_MAP_AVERMEDIA_M135A           "rc-avermedia-m135a"
+#define RC_MAP_AVERMEDIA_M733A_RM_K6     "rc-avermedia-m733a-rm-k6"
 #define RC_MAP_AVERMEDIA                 "rc-avermedia"
 #define RC_MAP_AVERTV_303                "rc-avertv-303"
 #define RC_MAP_BEHOLD_COLUMBUS           "rc-behold-columbus"
@@ -63,6 +69,8 @@ void rc_map_init(void);
 #define RC_MAP_BUDGET_CI_OLD             "rc-budget-ci-old"
 #define RC_MAP_CINERGY_1400              "rc-cinergy-1400"
 #define RC_MAP_CINERGY                   "rc-cinergy"
+#define RC_MAP_DIB0700_NEC_TABLE         "rc-dib0700-nec"
+#define RC_MAP_DIB0700_RC5_TABLE         "rc-dib0700-rc5"
 #define RC_MAP_DM1105_NEC                "rc-dm1105-nec"
 #define RC_MAP_DNTV_LIVE_DVBT_PRO        "rc-dntv-live-dvbt-pro"
 #define RC_MAP_DNTV_LIVE_DVB_T           "rc-dntv-live-dvb-t"
@@ -86,6 +94,7 @@ void rc_map_init(void);
 #define RC_MAP_KAIOMY                    "rc-kaiomy"
 #define RC_MAP_KWORLD_315U               "rc-kworld-315u"
 #define RC_MAP_KWORLD_PLUS_TV_ANALOG     "rc-kworld-plus-tv-analog"
+#define RC_MAP_LIRC                      "rc-lirc"
 #define RC_MAP_MANLI                     "rc-manli"
 #define RC_MAP_MSI_TVANYWHERE_PLUS       "rc-msi-tvanywhere-plus"
 #define RC_MAP_MSI_TVANYWHERE            "rc-msi-tvanywhere"
@@ -106,6 +115,7 @@ void rc_map_init(void);
 #define RC_MAP_PV951                     "rc-pv951"
 #define RC_MAP_RC5_HAUPPAUGE_NEW         "rc-rc5-hauppauge-new"
 #define RC_MAP_RC5_TV                    "rc-rc5-tv"
+#define RC_MAP_RC6_MCE                   "rc-rc6-mce"
 #define RC_MAP_REAL_AUDIO_220_32_KEYS    "rc-real-audio-220-32-keys"
 #define RC_MAP_TBS_NEC                   "rc-tbs-nec"
 #define RC_MAP_TERRATEC_CINERGY_XS       "rc-terratec-cinergy-xs"
@@ -115,6 +125,7 @@ void rc_map_init(void);
 #define RC_MAP_VIDEOMATE_TV_PVR          "rc-videomate-tv-pvr"
 #define RC_MAP_WINFAST                   "rc-winfast"
 #define RC_MAP_WINFAST_USBII_DELUXE      "rc-winfast-usbii-deluxe"
+
 /*
  * Please, do not just append newer Remote Controller names at the end.
  * The names should be ordered in alphabetical order
diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
index b6774783687..80346a6d28a 100644
--- a/include/media/sh_mobile_ceu.h
+++ b/include/media/sh_mobile_ceu.h
@@ -6,8 +6,11 @@
 #define SH_CEU_FLAG_HSYNC_LOW		(1 << 2) /* default High if possible */
 #define SH_CEU_FLAG_VSYNC_LOW		(1 << 3) /* default High if possible */
 
+struct device;
+
 struct sh_mobile_ceu_info {
 	unsigned long flags;
+	struct device *csi2_dev;
 };
 
 #endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h
new file mode 100644
index 00000000000..4d261517446
--- /dev/null
+++ b/include/media/sh_mobile_csi2.h
@@ -0,0 +1,46 @@
+/*
+ * Driver header for the SH-Mobile MIPI CSI-2 unit
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SH_MIPI_CSI
+#define SH_MIPI_CSI
+
+enum sh_csi2_phy {
+	SH_CSI2_PHY_MAIN,
+	SH_CSI2_PHY_SUB,
+};
+
+enum sh_csi2_type {
+	SH_CSI2C,
+	SH_CSI2I,
+};
+
+#define SH_CSI2_CRC	(1 << 0)
+#define SH_CSI2_ECC	(1 << 1)
+
+struct platform_device;
+
+struct sh_csi2_client_config {
+	enum sh_csi2_phy phy;
+	unsigned char lanes;		/* bitmask[3:0] */
+	unsigned char channel;		/* 0..3 */
+	struct platform_device *pdev;	/* client platform device */
+};
+
+struct sh_csi2_pdata {
+	enum sh_csi2_type type;
+	unsigned int flags;
+	struct sh_csi2_client_config *clients;
+	int num_clients;
+};
+
+struct device;
+struct v4l2_device;
+
+#endif
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index c9a5bbfa6ab..2ce957301f7 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -12,12 +12,15 @@
 #ifndef SOC_CAMERA_H
 #define SOC_CAMERA_H
 
+#include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/pm.h>
 #include <linux/videodev2.h>
 #include <media/videobuf-core.h>
 #include <media/v4l2-device.h>
 
+extern struct bus_type soc_camera_bus_type;
+
 struct soc_camera_device {
 	struct list_head list;
 	struct device dev;
@@ -66,7 +69,7 @@ struct soc_camera_host_ops {
 	 * .get_formats() fail, .put_formats() will not be called at all, the
 	 * failing .get_formats() must then clean up internally.
 	 */
-	int (*get_formats)(struct soc_camera_device *, int,
+	int (*get_formats)(struct soc_camera_device *, unsigned int,
 			   struct soc_camera_format_xlate *);
 	void (*put_formats)(struct soc_camera_device *);
 	int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *);
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 5505c5360ca..51811eac46f 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -130,6 +130,7 @@
 #define TUNER_PHILIPS_CU1216L           82
 #define TUNER_NXP_TDA18271		83
 #define TUNER_SONY_BTF_PXN01Z		84
+#define TUNER_PHILIPS_FQ1236_MK5	85	/* NTSC, TDA9885, no FM radio */
 
 /* tv card specific */
 #define TDA9887_PRESENT 		(1<<0)
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 0dbe02ada25..f0cf2e7def0 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -24,10 +24,10 @@
  */
 enum v4l2_mbus_pixelcode {
 	V4L2_MBUS_FMT_FIXED = 1,
-	V4L2_MBUS_FMT_YUYV8_2X8_LE,
-	V4L2_MBUS_FMT_YVYU8_2X8_LE,
-	V4L2_MBUS_FMT_YUYV8_2X8_BE,
-	V4L2_MBUS_FMT_YVYU8_2X8_BE,
+	V4L2_MBUS_FMT_YUYV8_2X8,
+	V4L2_MBUS_FMT_YVYU8_2X8,
+	V4L2_MBUS_FMT_UYVY8_2X8,
+	V4L2_MBUS_FMT_VYUY8_2X8,
 	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
 	V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE,
 	V4L2_MBUS_FMT_RGB565_2X8_LE,
@@ -40,6 +40,12 @@ enum v4l2_mbus_pixelcode {
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE,
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE,
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE,
+	V4L2_MBUS_FMT_SGRBG8_1X8,
+	V4L2_MBUS_FMT_SBGGR12_1X12,
+	V4L2_MBUS_FMT_YUYV8_1_5X8,
+	V4L2_MBUS_FMT_YVYU8_1_5X8,
+	V4L2_MBUS_FMT_UYVY8_1_5X8,
+	V4L2_MBUS_FMT_VYUY8_1_5X8,
 };
 
 /**
@@ -58,4 +64,24 @@ struct v4l2_mbus_framefmt {
 	enum v4l2_colorspace		colorspace;
 };
 
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_fmt->width = mbus_fmt->width;
+	pix_fmt->height = mbus_fmt->height;
+	pix_fmt->field = mbus_fmt->field;
+	pix_fmt->colorspace = mbus_fmt->colorspace;
+}
+
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+			   const struct v4l2_pix_format *pix_fmt,
+			   enum v4l2_mbus_pixelcode code)
+{
+	mbus_fmt->width = pix_fmt->width;
+	mbus_fmt->height = pix_fmt->height;
+	mbus_fmt->field = pix_fmt->field;
+	mbus_fmt->colorspace = pix_fmt->colorspace;
+	mbus_fmt->code = code;
+}
+
 #endif
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a88889355ae..02c6f4d11ed 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -246,7 +246,7 @@ struct v4l2_subdev_video_ops {
 			struct v4l2_dv_timings *timings);
 	int (*g_dv_timings)(struct v4l2_subdev *sd,
 			struct v4l2_dv_timings *timings);
-	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, int index,
+	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
 			     enum v4l2_mbus_pixelcode *code);
 	int (*g_mbus_fmt)(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *fmt);
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index f91a736c133..f2c41cebf45 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -54,8 +54,6 @@ struct videobuf_queue;
 
 struct videobuf_mapping {
 	unsigned int count;
-	unsigned long start;
-	unsigned long end;
 	struct videobuf_queue *q;
 };
 
@@ -127,7 +125,7 @@ struct videobuf_queue_ops {
 struct videobuf_qtype_ops {
 	u32                     magic;
 
-	struct videobuf_buffer *(*alloc)(size_t size);
+	struct videobuf_buffer *(*alloc_vb)(size_t size);
 	void *(*vaddr)		(struct videobuf_buffer *buf);
 	int (*iolock)		(struct videobuf_queue *q,
 				 struct videobuf_buffer *vb,
@@ -173,7 +171,7 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
 int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		struct v4l2_framebuffer *fbuf);
 
-struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q);
+struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q);
 
 /* Used on videobuf-dvb */
 void *videobuf_queue_to_vaddr(struct videobuf_queue *q,
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index a195f3b9c00..97e07f46a0f 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -25,23 +25,6 @@
 /* --------------------------------------------------------------------- */
 
 /*
- * Return a scatterlist for some page-aligned vmalloc()'ed memory
- * block (NULL on errors).  Memory for the scatterlist is allocated
- * using kmalloc.  The caller must free the memory.
- */
-struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages);
-
-/*
- * Return a scatterlist for a an array of userpages (NULL on errors).
- * Memory for the scatterlist is allocated using kmalloc.  The caller
- * must free the memory.
- */
-struct scatterlist *videobuf_pages_to_sg(struct page **pages, int nr_pages,
-					 int offset);
-
-/* --------------------------------------------------------------------- */
-
-/*
  * A small set of helper functions to manage buffers (both userland
  * and kernel) for DMA.
  *
@@ -68,7 +51,7 @@ struct videobuf_dmabuf {
 	struct page         **pages;
 
 	/* for kernel buffers */
-	void                *vmalloc;
+	void                *vaddr;
 
 	/* for overlay buffers (pci-pci dma) */
 	dma_addr_t          bus_addr;
@@ -87,6 +70,16 @@ struct videobuf_dma_sg_memory {
 	struct videobuf_dmabuf  dma;
 };
 
+/*
+ * Scatter-gather DMA buffer API.
+ *
+ * These functions provide a simple way to create a page list and a
+ * scatter-gather list from a kernel, userspace of physical address and map the
+ * memory for DMA operation.
+ *
+ * Despite the name, this is totally unrelated to videobuf, except that
+ * videobuf-dma-sg uses the same API internally.
+ */
 void videobuf_dma_init(struct videobuf_dmabuf *dma);
 int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
 			   unsigned long data, unsigned long size);
@@ -96,8 +89,8 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
 			      dma_addr_t addr, int nr_pages);
 int videobuf_dma_free(struct videobuf_dmabuf *dma);
 
-int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma);
-int videobuf_dma_unmap(struct videobuf_queue *q, struct videobuf_dmabuf *dma);
+int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma);
+int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma);
 struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
 
 void *videobuf_sg_alloc(size_t size);
@@ -111,11 +104,5 @@ void videobuf_queue_sg_init(struct videobuf_queue *q,
 			 unsigned int msize,
 			 void *priv);
 
-/*FIXME: these variants are used only on *-alsa code, where videobuf is
- * used without queue
- */
-int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma);
-int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma);
-
 #endif /* _VIDEOBUF_DMA_SG_H */
 
diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h
index 851eb1a2ff2..e19403c18da 100644
--- a/include/media/videobuf-vmalloc.h
+++ b/include/media/videobuf-vmalloc.h
@@ -22,7 +22,7 @@
 struct videobuf_vmalloc_memory {
 	u32                 magic;
 
-	void                *vmalloc;
+	void                *vaddr;
 
 	/* remap_vmalloc_range seems to need to run
 	 * after mmap() on some cases */
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index 156c26bb8bd..a8de812ccbc 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -88,8 +88,16 @@ do { \
  * enum p9_msg_t - 9P message types
  * @P9_TSTATFS: file system status request
  * @P9_RSTATFS: file system status response
+ * @P9_TSYMLINK: make symlink request
+ * @P9_RSYMLINK: make symlink response
+ * @P9_TMKNOD: create a special file object request
+ * @P9_RMKNOD: create a special file object response
+ * @P9_TLCREATE: prepare a handle for I/O on an new file for 9P2000.L
+ * @P9_RLCREATE: response with file access information for 9P2000.L
  * @P9_TRENAME: rename request
  * @P9_RRENAME: rename response
+ * @P9_TMKDIR: create a directory request
+ * @P9_RMKDIR: create a directory response
  * @P9_TVERSION: version handshake request
  * @P9_RVERSION: version handshake response
  * @P9_TAUTH: request to establish authentication channel
@@ -131,8 +139,30 @@ do { \
 enum p9_msg_t {
 	P9_TSTATFS = 8,
 	P9_RSTATFS,
+	P9_TLOPEN = 12,
+	P9_RLOPEN,
+	P9_TLCREATE = 14,
+	P9_RLCREATE,
+	P9_TSYMLINK = 16,
+	P9_RSYMLINK,
+	P9_TMKNOD = 18,
+	P9_RMKNOD,
 	P9_TRENAME = 20,
 	P9_RRENAME,
+	P9_TGETATTR = 24,
+	P9_RGETATTR,
+	P9_TSETATTR = 26,
+	P9_RSETATTR,
+	P9_TXATTRWALK = 30,
+	P9_RXATTRWALK,
+	P9_TXATTRCREATE = 32,
+	P9_RXATTRCREATE,
+	P9_TREADDIR = 40,
+	P9_RREADDIR,
+	P9_TLINK = 70,
+	P9_RLINK,
+	P9_TMKDIR = 72,
+	P9_RMKDIR,
 	P9_TVERSION = 100,
 	P9_RVERSION,
 	P9_TAUTH = 102,
@@ -275,6 +305,9 @@ enum p9_qid_t {
 /* ample room for Twrite/Rread header */
 #define P9_IOHDRSZ	24
 
+/* Room for readdir header */
+#define P9_READDIRHDRSZ	24
+
 /**
  * struct p9_str - length prefixed string type
  * @len: length of the string
@@ -357,6 +390,74 @@ struct p9_wstat {
 	u32 n_muid;		/* 9p2000.u extensions */
 };
 
+struct p9_stat_dotl {
+	u64 st_result_mask;
+	struct p9_qid qid;
+	u32 st_mode;
+	u32 st_uid;
+	u32 st_gid;
+	u64 st_nlink;
+	u64 st_rdev;
+	u64 st_size;
+	u64 st_blksize;
+	u64 st_blocks;
+	u64 st_atime_sec;
+	u64 st_atime_nsec;
+	u64 st_mtime_sec;
+	u64 st_mtime_nsec;
+	u64 st_ctime_sec;
+	u64 st_ctime_nsec;
+	u64 st_btime_sec;
+	u64 st_btime_nsec;
+	u64 st_gen;
+	u64 st_data_version;
+};
+
+#define P9_STATS_MODE		0x00000001ULL
+#define P9_STATS_NLINK		0x00000002ULL
+#define P9_STATS_UID		0x00000004ULL
+#define P9_STATS_GID		0x00000008ULL
+#define P9_STATS_RDEV		0x00000010ULL
+#define P9_STATS_ATIME		0x00000020ULL
+#define P9_STATS_MTIME		0x00000040ULL
+#define P9_STATS_CTIME		0x00000080ULL
+#define P9_STATS_INO		0x00000100ULL
+#define P9_STATS_SIZE		0x00000200ULL
+#define P9_STATS_BLOCKS		0x00000400ULL
+
+#define P9_STATS_BTIME		0x00000800ULL
+#define P9_STATS_GEN		0x00001000ULL
+#define P9_STATS_DATA_VERSION	0x00002000ULL
+
+#define P9_STATS_BASIC		0x000007ffULL /* Mask for fields up to BLOCKS */
+#define P9_STATS_ALL		0x00003fffULL /* Mask for All fields above */
+
+/**
+ * struct p9_iattr_dotl - P9 inode attribute for setattr
+ * @valid: bitfield specifying which fields are valid
+ *         same as in struct iattr
+ * @mode: File permission bits
+ * @uid: user id of owner
+ * @gid: group id
+ * @size: File size
+ * @atime_sec: Last access time, seconds
+ * @atime_nsec: Last access time, nanoseconds
+ * @mtime_sec: Last modification time, seconds
+ * @mtime_nsec: Last modification time, nanoseconds
+ */
+
+struct p9_iattr_dotl {
+	u32 valid;
+	u32 mode;
+	u32 uid;
+	u32 gid;
+	u64 size;
+	u64 atime_sec;
+	u64 atime_nsec;
+	u64 mtime_sec;
+	u64 mtime_nsec;
+};
+
 /* Structures for Protocol Operations */
 struct p9_tstatfs {
 	u32 fid;
@@ -485,6 +586,18 @@ struct p9_rwrite {
 	u32 count;
 };
 
+struct p9_treaddir {
+	u32 fid;
+	u64 offset;
+	u32 count;
+};
+
+struct p9_rreaddir {
+	u32 count;
+	u8 *data;
+};
+
+
 struct p9_tclunk {
 	u32 fid;
 };
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 7dd3ed85c78..d1aa2cfb30f 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -195,6 +195,21 @@ struct p9_fid {
 	struct list_head dlist;	/* list of all fids attached to a dentry */
 };
 
+/**
+ * struct p9_dirent - directory entry structure
+ * @qid: The p9 server qid for this dirent
+ * @d_off: offset to the next dirent
+ * @d_type: type of file
+ * @d_name: file name
+ */
+
+struct p9_dirent {
+	struct p9_qid qid;
+	u64 d_off;
+	unsigned char d_type;
+	char d_name[256];
+};
+
 int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb);
 int p9_client_rename(struct p9_fid *fid, struct p9_fid *newdirfid, char *name);
 int p9_client_version(struct p9_client *);
@@ -211,15 +226,31 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
 int p9_client_open(struct p9_fid *fid, int mode);
 int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
 							char *extension);
+int p9_client_link(struct p9_fid *fid, struct p9_fid *oldfid, char *newname);
+int p9_client_symlink(struct p9_fid *fid, char *name, char *symname, gid_t gid,
+							struct p9_qid *qid);
+int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
+		gid_t gid, struct p9_qid *qid);
 int p9_client_clunk(struct p9_fid *fid);
 int p9_client_remove(struct p9_fid *fid);
 int p9_client_read(struct p9_fid *fid, char *data, char __user *udata,
 							u64 offset, u32 count);
 int p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
 							u64 offset, u32 count);
+int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset);
+int p9dirent_read(char *buf, int len, struct p9_dirent *dirent,
+							int proto_version);
 struct p9_wstat *p9_client_stat(struct p9_fid *fid);
 int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst);
+int p9_client_setattr(struct p9_fid *fid, struct p9_iattr_dotl *attr);
+
+struct p9_stat_dotl *p9_client_getattr_dotl(struct p9_fid *fid,
+							u64 request_mask);
 
+int p9_client_mknod_dotl(struct p9_fid *oldfid, char *name, int mode,
+			dev_t rdev, gid_t gid, struct p9_qid *);
+int p9_client_mkdir_dotl(struct p9_fid *fid, char *name, int mode,
+				gid_t gid, struct p9_qid *);
 struct p9_req_t *p9_tag_lookup(struct p9_client *, u16);
 void p9_client_cb(struct p9_client *c, struct p9_req_t *req);
 
@@ -229,5 +260,7 @@ void p9stat_free(struct p9_wstat *);
 
 int p9_is_proto_dotu(struct p9_client *clnt);
 int p9_is_proto_dotl(struct p9_client *clnt);
+struct p9_fid *p9_client_xattrwalk(struct p9_fid *, const char *, u64 *);
+int p9_client_xattrcreate(struct p9_fid *, const char *, u64, int);
 
 #endif /* NET_9P_CLIENT_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index c50a97fc76f..b7bdecb7b76 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -327,6 +327,14 @@ struct scsi_host_template {
 			sector_t, int []);
 
 	/*
+	 * This function is called when one or more partitions on the
+	 * device reach beyond the end of the device.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (*unlock_native_capacity)(struct scsi_device *);
+
+	/*
 	 * Can be used to export driver statistics and other infos to the
 	 * world outside the kernel ie. userspace and it also provides an
 	 * interface to feed the driver with information.
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index dd76cdede64..6e3a29732dc 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -366,7 +366,7 @@ struct snd_pcm_substream {
 	int number;
 	char name[32];			/* substream name */
 	int stream;			/* stream (direction) */
-	struct pm_qos_request_list *latency_pm_qos_req; /* pm_qos request */
+	struct pm_qos_request_list latency_pm_qos_req; /* pm_qos request */
 	size_t buffer_bytes_max;	/* limit ring buffer size */
 	struct snd_dma_buffer dma_buffer;
 	unsigned int dma_buf_id;
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index f5b1ba90e95..f3865c7b416 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -306,7 +306,6 @@ TRACE_EVENT(ext4_da_writepages_result,
 		__field(	int,	pages_written		)
 		__field(	long,	pages_skipped		)
 		__field(	char,	more_io			)	
-		__field(	char,	no_nrwrite_index_update )
 		__field(       pgoff_t,	writeback_index		)
 	),
 
@@ -317,16 +316,14 @@ TRACE_EVENT(ext4_da_writepages_result,
 		__entry->pages_written	= pages_written;
 		__entry->pages_skipped	= wbc->pages_skipped;
 		__entry->more_io	= wbc->more_io;
-		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
 		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d no_nrwrite_index_update %d writeback_index %lu",
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->ret,
 		  __entry->pages_written, __entry->pages_skipped,
 		  __entry->more_io,
-		  __entry->no_nrwrite_index_update,
 		  (unsigned long) __entry->writeback_index)
 );
 
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index c4efe9b8280..35a2a6e7bf1 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -18,52 +18,55 @@ enum {
 
 DECLARE_EVENT_CLASS(power,
 
-	TP_PROTO(unsigned int type, unsigned int state),
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
 
-	TP_ARGS(type, state),
+	TP_ARGS(type, state, cpu_id),
 
 	TP_STRUCT__entry(
 		__field(	u64,		type		)
 		__field(	u64,		state		)
+		__field(	u64,		cpu_id		)
 	),
 
 	TP_fast_assign(
 		__entry->type = type;
 		__entry->state = state;
+		__entry->cpu_id = cpu_id;
 	),
 
-	TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long)__entry->state)
+	TP_printk("type=%lu state=%lu cpu_id=%lu", (unsigned long)__entry->type,
+		(unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
 );
 
 DEFINE_EVENT(power, power_start,
 
-	TP_PROTO(unsigned int type, unsigned int state),
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
 
-	TP_ARGS(type, state)
+	TP_ARGS(type, state, cpu_id)
 );
 
 DEFINE_EVENT(power, power_frequency,
 
-	TP_PROTO(unsigned int type, unsigned int state),
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
 
-	TP_ARGS(type, state)
+	TP_ARGS(type, state, cpu_id)
 );
 
 TRACE_EVENT(power_end,
 
-	TP_PROTO(int dummy),
+	TP_PROTO(unsigned int cpu_id),
 
-	TP_ARGS(dummy),
+	TP_ARGS(cpu_id),
 
 	TP_STRUCT__entry(
-		__field(	u64,		dummy		)
+		__field(	u64,		cpu_id		)
 	),
 
 	TP_fast_assign(
-		__entry->dummy = 0xffff;
+		__entry->cpu_id = cpu_id;
 	),
 
-	TP_printk("dummy=%lu", (unsigned long)__entry->dummy)
+	TP_printk("cpu_id=%lu", (unsigned long)__entry->cpu_id)
 
 );
 
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 4f733ecea46..b9e1dd6c620 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -115,6 +115,23 @@ DEFINE_EVENT(sched_wakeup_template, sched_wakeup_new,
 	     TP_PROTO(struct task_struct *p, int success),
 	     TP_ARGS(p, success));
 
+#ifdef CREATE_TRACE_POINTS
+static inline long __trace_sched_switch_state(struct task_struct *p)
+{
+	long state = p->state;
+
+#ifdef CONFIG_PREEMPT
+	/*
+	 * For all intents and purposes a preempted task is a running task.
+	 */
+	if (task_thread_info(p)->preempt_count & PREEMPT_ACTIVE)
+		state = TASK_RUNNING;
+#endif
+
+	return state;
+}
+#endif
+
 /*
  * Tracepoint for task switches, performed by the scheduler:
  */
@@ -139,7 +156,7 @@ TRACE_EVENT(sched_switch,
 		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
 		__entry->prev_pid	= prev->pid;
 		__entry->prev_prio	= prev->prio;
-		__entry->prev_state	= prev->state;
+		__entry->prev_state	= __trace_sched_switch_state(prev);
 		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
 		__entry->next_pid	= next->pid;
 		__entry->next_prio	= next->prio;
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
index 814566c99d2..17df43464df 100644
--- a/include/trace/events/signal.h
+++ b/include/trace/events/signal.h
@@ -10,7 +10,8 @@
 
 #define TP_STORE_SIGINFO(__entry, info)				\
 	do {							\
-		if (info == SEND_SIG_NOINFO) {			\
+		if (info == SEND_SIG_NOINFO ||			\
+		    info == SEND_SIG_FORCED) {			\
 			__entry->errno	= 0;			\
 			__entry->code	= SI_USER;		\
 		} else if (info == SEND_SIG_PRIV) {		\
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 3d685d1f2a0..5a64905d727 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -725,7 +725,7 @@ perf_trace_##call(void *__data, proto)					\
 									\
 	{ assign; }							\
 									\
-	head = per_cpu_ptr(event_call->perf_events, smp_processor_id());\
+	head = this_cpu_ptr(event_call->perf_events);			\
 	perf_trace_buf_submit(entry, __entry_size, rctx, __addr,	\
 		__count, &__regs, head);				\
 }
diff --git a/init/Kconfig b/init/Kconfig
index 2cce9f343ad..5cff9a980c3 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -76,6 +76,14 @@ config INIT_ENV_ARG_LIMIT
 	  variables passed to init from the kernel command line.
 
 
+config CROSS_COMPILE
+	string "Cross-compiler tool prefix"
+	help
+	  Same as running 'make CROSS_COMPILE=prefix-' but stored for
+	  default make runs in this kernel build directory.  You don't
+	  need to set this unless you want the configured kernel build
+	  directory to select the cross-compiler automatically.
+
 config LOCALVERSION
 	string "Local version - append to kernel release"
 	help
diff --git a/init/main.c b/init/main.c
index 3bdb152f412..a42fdf4aeba 100644
--- a/init/main.c
+++ b/init/main.c
@@ -125,7 +125,9 @@ static char *ramdisk_execute_command;
 
 #ifdef CONFIG_SMP
 /* Setup configured maximum number of CPUs to activate */
-unsigned int __initdata setup_max_cpus = NR_CPUS;
+unsigned int setup_max_cpus = NR_CPUS;
+EXPORT_SYMBOL(setup_max_cpus);
+
 
 /*
  * Setup routine for controlling SMP activation
@@ -422,18 +424,26 @@ static void __init setup_command_line(char *command_line)
  * gcc-3.4 accidentally inlines this function, so use noinline.
  */
 
+static __initdata DECLARE_COMPLETION(kthreadd_done);
+
 static noinline void __init_refok rest_init(void)
 	__releases(kernel_lock)
 {
 	int pid;
 
 	rcu_scheduler_starting();
+	/*
+	 * We need to spawn init first so that it obtains pid 1, however
+	 * the init task will end up wanting to create kthreads, which, if
+	 * we schedule it before we create kthreadd, will OOPS.
+	 */
 	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
 	numa_default_policy();
 	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
 	rcu_read_lock();
 	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
 	rcu_read_unlock();
+	complete(&kthreadd_done);
 	unlock_kernel();
 
 	/*
@@ -855,6 +865,10 @@ static noinline int init_post(void)
 
 static int __init kernel_init(void * unused)
 {
+	/*
+	 * Wait until kthreadd is all set-up.
+	 */
+	wait_for_completion(&kthreadd_done);
 	lock_kernel();
 
 	/*
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 5108232f93d..c93fd3faac2 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -176,7 +176,6 @@ static struct inode *mqueue_get_inode(struct super_block *sb,
 	}
 	return inode;
 out_inode:
-	make_bad_inode(inode);
 	iput(inode);
 	return NULL;
 }
diff --git a/ipc/sem.c b/ipc/sem.c
index 506c8491a8d..40a8f462a82 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1256,6 +1256,33 @@ out:
 	return un;
 }
 
+
+/**
+ * get_queue_result - Retrieve the result code from sem_queue
+ * @q: Pointer to queue structure
+ *
+ * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
+ * q->status, then we must loop until the value is replaced with the final
+ * value: This may happen if a task is woken up by an unrelated event (e.g.
+ * signal) and in parallel the task is woken up by another task because it got
+ * the requested semaphores.
+ *
+ * The function can be called with or without holding the semaphore spinlock.
+ */
+static int get_queue_result(struct sem_queue *q)
+{
+	int error;
+
+	error = q->status;
+	while (unlikely(error == IN_WAKEUP)) {
+		cpu_relax();
+		error = q->status;
+	}
+
+	return error;
+}
+
+
 SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 		unsigned, nsops, const struct timespec __user *, timeout)
 {
@@ -1409,15 +1436,18 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 	else
 		schedule();
 
-	error = queue.status;
-	while(unlikely(error == IN_WAKEUP)) {
-		cpu_relax();
-		error = queue.status;
-	}
+	error = get_queue_result(&queue);
 
 	if (error != -EINTR) {
 		/* fast path: update_queue already obtained all requested
-		 * resources */
+		 * resources.
+		 * Perform a smp_mb(): User space could assume that semop()
+		 * is a memory barrier: Without the mb(), the cpu could
+		 * speculatively read in user space stale data that was
+		 * overwritten by the previous owner of the semaphore.
+		 */
+		smp_mb();
+
 		goto out_free;
 	}
 
@@ -1427,10 +1457,12 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 		goto out_free;
 	}
 
+	error = get_queue_result(&queue);
+
 	/*
 	 * If queue.status != -EINTR we are woken up by another process
 	 */
-	error = queue.status;
+
 	if (error != -EINTR) {
 		goto out_unlock_free;
 	}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 37642ad9cca..a8ce0995440 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4621,7 +4621,7 @@ static int alloc_css_id(struct cgroup_subsys *ss, struct cgroup *parent,
 	parent_css = parent->subsys[subsys_id];
 	child_css = child->subsys[subsys_id];
 	parent_id = parent_css->id;
-	depth = parent_id->depth;
+	depth = parent_id->depth + 1;
 
 	child_id = get_new_cssid(ss, depth);
 	if (IS_ERR(child_id))
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 8b92539b475..97d1b426a4a 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -34,7 +34,7 @@ void cpu_maps_update_done(void)
 	mutex_unlock(&cpu_add_remove_lock);
 }
 
-static __cpuinitdata RAW_NOTIFIER_HEAD(cpu_chain);
+static RAW_NOTIFIER_HEAD(cpu_chain);
 
 /* If set, cpu_up and cpu_down will return -EBUSY and do nothing.
  * Should always be manipulated under cpu_add_remove_lock
diff --git a/kernel/cred.c b/kernel/cred.c
index a2d5504fbcc..60bc8b1e32e 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -209,6 +209,31 @@ void exit_creds(struct task_struct *tsk)
 	}
 }
 
+/**
+ * get_task_cred - Get another task's objective credentials
+ * @task: The task to query
+ *
+ * Get the objective credentials of a task, pinning them so that they can't go
+ * away.  Accessing a task's credentials directly is not permitted.
+ *
+ * The caller must also make sure task doesn't get deleted, either by holding a
+ * ref on task or by holding tasklist_lock to prevent it from being unlinked.
+ */
+const struct cred *get_task_cred(struct task_struct *task)
+{
+	const struct cred *cred;
+
+	rcu_read_lock();
+
+	do {
+		cred = __task_cred((task));
+		BUG_ON(!cred);
+	} while (!atomic_inc_not_zero(&((struct cred *)cred)->usage));
+
+	rcu_read_unlock();
+	return cred;
+}
+
 /*
  * Allocate blank credentials, such that the credentials can be filled in at a
  * later date without risk of ENOMEM.
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cb7cd1de10..8bc5eeffec8 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,13 +605,13 @@ cpu_master_loop:
 		if (dbg_kdb_mode) {
 			kgdb_connected = 1;
 			error = kdb_stub(ks);
+			kgdb_connected = 0;
 		} else {
 			error = gdb_serial_stub(ks);
 		}
 
 		if (error == DBG_PASS_EVENT) {
 			dbg_kdb_mode = !dbg_kdb_mode;
-			kgdb_connected = 0;
 		} else if (error == DBG_SWITCH_CPU_EVENT) {
 			dbg_cpu_switch(cpu, dbg_switch_cpu);
 			goto cpu_loop;
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4b17b326952..e8fd6868682 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -621,10 +621,8 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 	switch (remcom_in_buffer[1]) {
 	case 's':
 	case 'f':
-		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
-			error_packet(remcom_out_buffer, -EINVAL);
+		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
 			break;
-		}
 
 		i = 0;
 		remcom_out_buffer[0] = 'm';
@@ -665,10 +663,9 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 		pack_threadid(remcom_out_buffer + 2, thref);
 		break;
 	case 'T':
-		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
-			error_packet(remcom_out_buffer, -EINVAL);
+		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
 			break;
-		}
+
 		ks->threadid = 0;
 		ptr = remcom_in_buffer + 17;
 		kgdb_hex2long(&ptr, &ks->threadid);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index b724c791b6d..ebe4a287419 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1820,9 +1820,8 @@ static int kdb_sr(int argc, const char **argv)
 {
 	if (argc != 1)
 		return KDB_ARGCOUNT;
-	sysrq_toggle_support(1);
 	kdb_trap_printk++;
-	handle_sysrq(*argv[1], NULL);
+	__handle_sysrq(*argv[1], NULL, 0);
 	kdb_trap_printk--;
 
 	return 0;
@@ -1857,12 +1856,6 @@ static int kdb_ef(int argc, const char **argv)
 }
 
 #if defined(CONFIG_MODULES)
-/* modules using other modules */
-struct module_use {
-	struct list_head list;
-	struct module *module_which_uses;
-};
-
 /*
  * kdb_lsmod - This function implements the 'lsmod' command.  Lists
  *	currently loaded kernel modules.
@@ -1889,14 +1882,15 @@ static int kdb_lsmod(int argc, const char **argv)
 			kdb_printf(" (Loading)");
 		else
 			kdb_printf(" (Live)");
+		kdb_printf(" 0x%p", mod->module_core);
 
 #ifdef CONFIG_MODULE_UNLOAD
 		{
 			struct module_use *use;
 			kdb_printf(" [ ");
-			list_for_each_entry(use, &mod->modules_which_use_me,
-					    list)
-				kdb_printf("%s ", use->module_which_uses->name);
+			list_for_each_entry(use, &mod->source_list,
+					    source_list)
+				kdb_printf("%s ", use->target->name);
 			kdb_printf("]\n");
 		}
 #endif
@@ -2297,6 +2291,9 @@ static int kdb_ll(int argc, const char **argv)
 	while (va) {
 		char buf[80];
 
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+
 		sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
 		diag = kdb_parse(buf);
 		if (diag)
diff --git a/kernel/early_res.c b/kernel/early_res.c
index 31aa9332ef3..7bfae887f21 100644
--- a/kernel/early_res.c
+++ b/kernel/early_res.c
@@ -7,6 +7,8 @@
 #include <linux/bootmem.h>
 #include <linux/mm.h>
 #include <linux/early_res.h>
+#include <linux/slab.h>
+#include <linux/kmemleak.h>
 
 /*
  * Early reserved memory areas.
@@ -319,6 +321,8 @@ void __init free_early(u64 start, u64 end)
 	struct early_res *r;
 	int i;
 
+	kmemleak_free_part(__va(start), end - start);
+
 	i = find_overlapped_early(start, end);
 	r = &early_res[i];
 	if (i >= max_early_res || r->end != end || r->start != start)
@@ -333,6 +337,8 @@ void __init free_early_partial(u64 start, u64 end)
 	struct early_res *r;
 	int i;
 
+	kmemleak_free_part(__va(start), end - start);
+
 	if (start == end)
 		return;
 
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c35452cadde..dd62f8e714c 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -27,7 +27,7 @@ static struct exec_domain *exec_domains = &default_exec_domain;
 static DEFINE_RWLOCK(exec_domains_lock);
 
 
-static u_long ident_map[32] = {
+static unsigned long ident_map[32] = {
 	0,	1,	2,	3,	4,	5,	6,	7,
 	8,	9,	10,	11,	12,	13,	14,	15,
 	16,	17,	18,	19,	20,	21,	22,	23,
@@ -56,10 +56,10 @@ default_handler(int segment, struct pt_regs *regp)
 }
 
 static struct exec_domain *
-lookup_exec_domain(u_long personality)
+lookup_exec_domain(unsigned int personality)
 {
-	struct exec_domain *	ep;
-	u_long			pers = personality(personality);
+	unsigned int pers = personality(personality);
+	struct exec_domain *ep;
 
 	read_lock(&exec_domains_lock);
 	for (ep = exec_domains; ep; ep = ep->next) {
@@ -70,7 +70,7 @@ lookup_exec_domain(u_long personality)
 
 #ifdef CONFIG_MODULES
 	read_unlock(&exec_domains_lock);
-	request_module("personality-%ld", pers);
+	request_module("personality-%d", pers);
 	read_lock(&exec_domains_lock);
 
 	for (ep = exec_domains; ep; ep = ep->next) {
@@ -135,7 +135,7 @@ unregister:
 }
 
 int
-__set_personality(u_long personality)
+__set_personality(unsigned int personality)
 {
 	struct exec_domain	*ep, *oep;
 
@@ -188,9 +188,9 @@ static int __init proc_execdomains_init(void)
 module_init(proc_execdomains_init);
 #endif
 
-SYSCALL_DEFINE1(personality, u_long, personality)
+SYSCALL_DEFINE1(personality, unsigned int, personality)
 {
-	u_long old = current->personality;
+	unsigned int old = current->personality;
 
 	if (personality != 0xffffffff) {
 		set_personality(personality);
@@ -198,7 +198,7 @@ SYSCALL_DEFINE1(personality, u_long, personality)
 			return -EINVAL;
 	}
 
-	return (long)old;
+	return old;
 }
 
 
diff --git a/kernel/futex.c b/kernel/futex.c
index e7a35f1039e..6a3a5fa1526 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -429,20 +429,11 @@ static void free_pi_state(struct futex_pi_state *pi_state)
 static struct task_struct * futex_find_get_task(pid_t pid)
 {
 	struct task_struct *p;
-	const struct cred *cred = current_cred(), *pcred;
 
 	rcu_read_lock();
 	p = find_task_by_vpid(pid);
-	if (!p) {
-		p = ERR_PTR(-ESRCH);
-	} else {
-		pcred = __task_cred(p);
-		if (cred->euid != pcred->euid &&
-		    cred->euid != pcred->uid)
-			p = ERR_PTR(-ESRCH);
-		else
-			get_task_struct(p);
-	}
+	if (p)
+		get_task_struct(p);
 
 	rcu_read_unlock();
 
@@ -564,8 +555,8 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb,
 	if (!pid)
 		return -ESRCH;
 	p = futex_find_get_task(pid);
-	if (IS_ERR(p))
-		return PTR_ERR(p);
+	if (!p)
+		return -ESRCH;
 
 	/*
 	 * We need to look at the task state flags to figure out,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3164ba7ce15..e1497481fe8 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -456,6 +456,9 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
 		/* note that IRQF_TRIGGER_MASK == IRQ_TYPE_SENSE_MASK */
 		desc->status &= ~(IRQ_LEVEL | IRQ_TYPE_SENSE_MASK);
 		desc->status |= flags;
+
+		if (chip != desc->chip)
+			irq_chip_set_defaults(desc->chip);
 	}
 
 	return ret;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 474a84715ea..131b1703936 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1089,9 +1089,10 @@ void crash_kexec(struct pt_regs *regs)
 
 size_t crash_get_memory_size(void)
 {
-	size_t size;
+	size_t size = 0;
 	mutex_lock(&kexec_mutex);
-	size = crashk_res.end - crashk_res.start + 1;
+	if (crashk_res.end != crashk_res.start)
+		size = crashk_res.end - crashk_res.start + 1;
 	mutex_unlock(&kexec_mutex);
 	return size;
 }
@@ -1134,7 +1135,7 @@ int crash_shrink_memory(unsigned long new_size)
 
 	free_reserved_phys_range(end, crashk_res.end);
 
-	if (start == end)
+	if ((start == end) && (crashk_res.parent != NULL))
 		release_resource(&crashk_res);
 	crashk_res.end = end - 1;
 
diff --git a/kernel/module.c b/kernel/module.c
index 333fbcc9697..6c562828c85 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -72,7 +72,11 @@
 /* If this is set, the section belongs in the init part of the module */
 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
 
-/* List of modules, protected by module_mutex or preempt_disable
+/*
+ * Mutex protects:
+ * 1) List of modules (also safely readable with preempt_disable),
+ * 2) module_use links,
+ * 3) module_addr_min/module_addr_max.
  * (delete uses stop_machine/add uses RCU list operations). */
 DEFINE_MUTEX(module_mutex);
 EXPORT_SYMBOL_GPL(module_mutex);
@@ -90,7 +94,8 @@ static DECLARE_WAIT_QUEUE_HEAD(module_wq);
 
 static BLOCKING_NOTIFIER_HEAD(module_notify_list);
 
-/* Bounds of module allocation, for speeding __module_address */
+/* Bounds of module allocation, for speeding __module_address.
+ * Protected by module_mutex. */
 static unsigned long module_addr_min = -1UL, module_addr_max = 0;
 
 int register_module_notifier(struct notifier_block * nb)
@@ -329,7 +334,7 @@ static bool find_symbol_in_section(const struct symsearch *syms,
 }
 
 /* Find a symbol and return it, along with, (optional) crc and
- * (optional) module which owns it */
+ * (optional) module which owns it.  Needs preempt disabled or module_mutex. */
 const struct kernel_symbol *find_symbol(const char *name,
 					struct module **owner,
 					const unsigned long **crc,
@@ -403,7 +408,7 @@ static unsigned int find_pcpusec(Elf_Ehdr *hdr,
 				 Elf_Shdr *sechdrs,
 				 const char *secstrings)
 {
-	return find_sec(hdr, sechdrs, secstrings, ".data.percpu");
+	return find_sec(hdr, sechdrs, secstrings, ".data..percpu");
 }
 
 static void percpu_modcopy(struct module *mod,
@@ -523,7 +528,8 @@ static void module_unload_init(struct module *mod)
 {
 	int cpu;
 
-	INIT_LIST_HEAD(&mod->modules_which_use_me);
+	INIT_LIST_HEAD(&mod->source_list);
+	INIT_LIST_HEAD(&mod->target_list);
 	for_each_possible_cpu(cpu) {
 		per_cpu_ptr(mod->refptr, cpu)->incs = 0;
 		per_cpu_ptr(mod->refptr, cpu)->decs = 0;
@@ -535,20 +541,13 @@ static void module_unload_init(struct module *mod)
 	mod->waiter = current;
 }
 
-/* modules using other modules */
-struct module_use
-{
-	struct list_head list;
-	struct module *module_which_uses;
-};
-
 /* Does a already use b? */
 static int already_uses(struct module *a, struct module *b)
 {
 	struct module_use *use;
 
-	list_for_each_entry(use, &b->modules_which_use_me, list) {
-		if (use->module_which_uses == a) {
+	list_for_each_entry(use, &b->source_list, source_list) {
+		if (use->source == a) {
 			DEBUGP("%s uses %s!\n", a->name, b->name);
 			return 1;
 		}
@@ -557,62 +556,68 @@ static int already_uses(struct module *a, struct module *b)
 	return 0;
 }
 
-/* Module a uses b */
-int use_module(struct module *a, struct module *b)
+/*
+ * Module a uses b
+ *  - we add 'a' as a "source", 'b' as a "target" of module use
+ *  - the module_use is added to the list of 'b' sources (so
+ *    'b' can walk the list to see who sourced them), and of 'a'
+ *    targets (so 'a' can see what modules it targets).
+ */
+static int add_module_usage(struct module *a, struct module *b)
 {
 	struct module_use *use;
-	int no_warn, err;
 
-	if (b == NULL || already_uses(a, b)) return 1;
+	DEBUGP("Allocating new usage for %s.\n", a->name);
+	use = kmalloc(sizeof(*use), GFP_ATOMIC);
+	if (!use) {
+		printk(KERN_WARNING "%s: out of memory loading\n", a->name);
+		return -ENOMEM;
+	}
 
-	/* If we're interrupted or time out, we fail. */
-	if (wait_event_interruptible_timeout(
-		    module_wq, (err = strong_try_module_get(b)) != -EBUSY,
-		    30 * HZ) <= 0) {
-		printk("%s: gave up waiting for init of module %s.\n",
-		       a->name, b->name);
+	use->source = a;
+	use->target = b;
+	list_add(&use->source_list, &b->source_list);
+	list_add(&use->target_list, &a->target_list);
+	return 0;
+}
+
+/* Module a uses b: caller needs module_mutex() */
+int ref_module(struct module *a, struct module *b)
+{
+	int err;
+
+	if (b == NULL || already_uses(a, b))
 		return 0;
-	}
 
-	/* If strong_try_module_get() returned a different error, we fail. */
+	/* If module isn't available, we fail. */
+	err = strong_try_module_get(b);
 	if (err)
-		return 0;
+		return err;
 
-	DEBUGP("Allocating new usage for %s.\n", a->name);
-	use = kmalloc(sizeof(*use), GFP_ATOMIC);
-	if (!use) {
-		printk("%s: out of memory loading\n", a->name);
+	err = add_module_usage(a, b);
+	if (err) {
 		module_put(b);
-		return 0;
+		return err;
 	}
-
-	use->module_which_uses = a;
-	list_add(&use->list, &b->modules_which_use_me);
-	no_warn = sysfs_create_link(b->holders_dir, &a->mkobj.kobj, a->name);
-	return 1;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(use_module);
+EXPORT_SYMBOL_GPL(ref_module);
 
 /* Clear the unload stuff of the module. */
 static void module_unload_free(struct module *mod)
 {
-	struct module *i;
+	struct module_use *use, *tmp;
 
-	list_for_each_entry(i, &modules, list) {
-		struct module_use *use;
-
-		list_for_each_entry(use, &i->modules_which_use_me, list) {
-			if (use->module_which_uses == mod) {
-				DEBUGP("%s unusing %s\n", mod->name, i->name);
-				module_put(i);
-				list_del(&use->list);
-				kfree(use);
-				sysfs_remove_link(i->holders_dir, mod->name);
-				/* There can be at most one match. */
-				break;
-			}
-		}
+	mutex_lock(&module_mutex);
+	list_for_each_entry_safe(use, tmp, &mod->target_list, target_list) {
+		struct module *i = use->target;
+		DEBUGP("%s unusing %s\n", mod->name, i->name);
+		module_put(i);
+		list_del(&use->source_list);
+		list_del(&use->target_list);
+		kfree(use);
 	}
+	mutex_unlock(&module_mutex);
 }
 
 #ifdef CONFIG_MODULE_FORCE_UNLOAD
@@ -735,7 +740,7 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
 		goto out;
 	}
 
-	if (!list_empty(&mod->modules_which_use_me)) {
+	if (!list_empty(&mod->source_list)) {
 		/* Other modules depend on us: get rid of them first. */
 		ret = -EWOULDBLOCK;
 		goto out;
@@ -779,13 +784,13 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
 	blocking_notifier_call_chain(&module_notify_list,
 				     MODULE_STATE_GOING, mod);
 	async_synchronize_full();
-	mutex_lock(&module_mutex);
+
 	/* Store the name of the last unloaded module for diagnostic purposes */
 	strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
-	ddebug_remove_module(mod->name);
-	free_module(mod);
 
- out:
+	free_module(mod);
+	return 0;
+out:
 	mutex_unlock(&module_mutex);
 	return ret;
 }
@@ -799,9 +804,9 @@ static inline void print_unload_info(struct seq_file *m, struct module *mod)
 
 	/* Always include a trailing , so userspace can differentiate
            between this and the old multi-field proc format. */
-	list_for_each_entry(use, &mod->modules_which_use_me, list) {
+	list_for_each_entry(use, &mod->source_list, source_list) {
 		printed_something = 1;
-		seq_printf(m, "%s,", use->module_which_uses->name);
+		seq_printf(m, "%s,", use->source->name);
 	}
 
 	if (mod->init != NULL && mod->exit == NULL) {
@@ -880,11 +885,11 @@ static inline void module_unload_free(struct module *mod)
 {
 }
 
-int use_module(struct module *a, struct module *b)
+int ref_module(struct module *a, struct module *b)
 {
-	return strong_try_module_get(b) == 0;
+	return strong_try_module_get(b);
 }
-EXPORT_SYMBOL_GPL(use_module);
+EXPORT_SYMBOL_GPL(ref_module);
 
 static inline void module_unload_init(struct module *mod)
 {
@@ -1001,6 +1006,8 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs,
 {
 	const unsigned long *crc;
 
+	/* Since this should be found in kernel (which can't be removed),
+	 * no locking is necessary. */
 	if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
 			 &crc, true, false))
 		BUG();
@@ -1043,29 +1050,62 @@ static inline int same_magic(const char *amagic, const char *bmagic,
 }
 #endif /* CONFIG_MODVERSIONS */
 
-/* Resolve a symbol for this module.  I.e. if we find one, record usage.
-   Must be holding module_mutex. */
+/* Resolve a symbol for this module.  I.e. if we find one, record usage. */
 static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
 						  unsigned int versindex,
 						  const char *name,
-						  struct module *mod)
+						  struct module *mod,
+						  char ownername[])
 {
 	struct module *owner;
 	const struct kernel_symbol *sym;
 	const unsigned long *crc;
+	int err;
 
+	mutex_lock(&module_mutex);
 	sym = find_symbol(name, &owner, &crc,
 			  !(mod->taints & (1 << TAINT_PROPRIETARY_MODULE)), true);
-	/* use_module can fail due to OOM,
-	   or module initialization or unloading */
-	if (sym) {
-		if (!check_version(sechdrs, versindex, name, mod, crc, owner)
-		    || !use_module(mod, owner))
-			sym = NULL;
+	if (!sym)
+		goto unlock;
+
+	if (!check_version(sechdrs, versindex, name, mod, crc, owner)) {
+		sym = ERR_PTR(-EINVAL);
+		goto getname;
 	}
+
+	err = ref_module(mod, owner);
+	if (err) {
+		sym = ERR_PTR(err);
+		goto getname;
+	}
+
+getname:
+	/* We must make copy under the lock if we failed to get ref. */
+	strncpy(ownername, module_name(owner), MODULE_NAME_LEN);
+unlock:
+	mutex_unlock(&module_mutex);
 	return sym;
 }
 
+static const struct kernel_symbol *resolve_symbol_wait(Elf_Shdr *sechdrs,
+						       unsigned int versindex,
+						       const char *name,
+						       struct module *mod)
+{
+	const struct kernel_symbol *ksym;
+	char ownername[MODULE_NAME_LEN];
+
+	if (wait_event_interruptible_timeout(module_wq,
+			!IS_ERR(ksym = resolve_symbol(sechdrs, versindex, name,
+						      mod, ownername)) ||
+			PTR_ERR(ksym) != -EBUSY,
+					     30 * HZ) <= 0) {
+		printk(KERN_WARNING "%s: gave up waiting for init of module %s.\n",
+		       mod->name, ownername);
+	}
+	return ksym;
+}
+
 /*
  * /sys/module/foo/sections stuff
  * J. Corbet <corbet@lwn.net>
@@ -1295,7 +1335,34 @@ static inline void remove_notes_attrs(struct module *mod)
 #endif
 
 #ifdef CONFIG_SYSFS
-int module_add_modinfo_attrs(struct module *mod)
+static void add_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+	struct module_use *use;
+	int nowarn;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry(use, &mod->target_list, target_list) {
+		nowarn = sysfs_create_link(use->target->holders_dir,
+					   &mod->mkobj.kobj, mod->name);
+	}
+	mutex_unlock(&module_mutex);
+#endif
+}
+
+static void del_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+	struct module_use *use;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry(use, &mod->target_list, target_list)
+		sysfs_remove_link(use->target->holders_dir, mod->name);
+	mutex_unlock(&module_mutex);
+#endif
+}
+
+static int module_add_modinfo_attrs(struct module *mod)
 {
 	struct module_attribute *attr;
 	struct module_attribute *temp_attr;
@@ -1321,7 +1388,7 @@ int module_add_modinfo_attrs(struct module *mod)
 	return error;
 }
 
-void module_remove_modinfo_attrs(struct module *mod)
+static void module_remove_modinfo_attrs(struct module *mod)
 {
 	struct module_attribute *attr;
 	int i;
@@ -1337,7 +1404,7 @@ void module_remove_modinfo_attrs(struct module *mod)
 	kfree(mod->modinfo_attrs);
 }
 
-int mod_sysfs_init(struct module *mod)
+static int mod_sysfs_init(struct module *mod)
 {
 	int err;
 	struct kobject *kobj;
@@ -1371,12 +1438,16 @@ out:
 	return err;
 }
 
-int mod_sysfs_setup(struct module *mod,
+static int mod_sysfs_setup(struct module *mod,
 			   struct kernel_param *kparam,
 			   unsigned int num_params)
 {
 	int err;
 
+	err = mod_sysfs_init(mod);
+	if (err)
+		goto out;
+
 	mod->holders_dir = kobject_create_and_add("holders", &mod->mkobj.kobj);
 	if (!mod->holders_dir) {
 		err = -ENOMEM;
@@ -1391,6 +1462,8 @@ int mod_sysfs_setup(struct module *mod,
 	if (err)
 		goto out_unreg_param;
 
+	add_usage_links(mod);
+
 	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
 	return 0;
 
@@ -1400,6 +1473,7 @@ out_unreg_holders:
 	kobject_put(mod->holders_dir);
 out_unreg:
 	kobject_put(&mod->mkobj.kobj);
+out:
 	return err;
 }
 
@@ -1410,14 +1484,40 @@ static void mod_sysfs_fini(struct module *mod)
 
 #else /* CONFIG_SYSFS */
 
+static inline int mod_sysfs_init(struct module *mod)
+{
+	return 0;
+}
+
+static inline int mod_sysfs_setup(struct module *mod,
+			   struct kernel_param *kparam,
+			   unsigned int num_params)
+{
+	return 0;
+}
+
+static inline int module_add_modinfo_attrs(struct module *mod)
+{
+	return 0;
+}
+
+static inline void module_remove_modinfo_attrs(struct module *mod)
+{
+}
+
 static void mod_sysfs_fini(struct module *mod)
 {
 }
 
+static void del_usage_links(struct module *mod)
+{
+}
+
 #endif /* CONFIG_SYSFS */
 
 static void mod_kobject_remove(struct module *mod)
 {
+	del_usage_links(mod);
 	module_remove_modinfo_attrs(mod);
 	module_param_sysfs_remove(mod);
 	kobject_put(mod->mkobj.drivers_dir);
@@ -1436,17 +1536,22 @@ static int __unlink_module(void *_mod)
 	return 0;
 }
 
-/* Free a module, remove from lists, etc (must hold module_mutex). */
+/* Free a module, remove from lists, etc. */
 static void free_module(struct module *mod)
 {
 	trace_module_free(mod);
 
 	/* Delete from various lists */
+	mutex_lock(&module_mutex);
 	stop_machine(__unlink_module, mod, NULL);
+	mutex_unlock(&module_mutex);
 	remove_notes_attrs(mod);
 	remove_sect_attrs(mod);
 	mod_kobject_remove(mod);
 
+	/* Remove dynamic debug info */
+	ddebug_remove_module(mod->name);
+
 	/* Arch-specific cleanup. */
 	module_arch_cleanup(mod);
 
@@ -1493,6 +1598,8 @@ EXPORT_SYMBOL_GPL(__symbol_get);
 /*
  * Ensure that an exported symbol [global namespace] does not already exist
  * in the kernel or in some other module's exported symbol table.
+ *
+ * You must hold the module_mutex.
  */
 static int verify_export_symbols(struct module *mod)
 {
@@ -1558,21 +1665,23 @@ static int simplify_symbols(Elf_Shdr *sechdrs,
 			break;
 
 		case SHN_UNDEF:
-			ksym = resolve_symbol(sechdrs, versindex,
-					      strtab + sym[i].st_name, mod);
+			ksym = resolve_symbol_wait(sechdrs, versindex,
+						   strtab + sym[i].st_name,
+						   mod);
 			/* Ok if resolved.  */
-			if (ksym) {
+			if (ksym && !IS_ERR(ksym)) {
 				sym[i].st_value = ksym->value;
 				break;
 			}
 
 			/* Ok if weak.  */
-			if (ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
+			if (!ksym && ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
 				break;
 
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       mod->name, strtab + sym[i].st_name);
-			ret = -ENOENT;
+			printk(KERN_WARNING "%s: Unknown symbol %s (err %li)\n",
+			       mod->name, strtab + sym[i].st_name,
+			       PTR_ERR(ksym));
+			ret = PTR_ERR(ksym) ?: -ENOENT;
 			break;
 
 		default:
@@ -1955,16 +2064,24 @@ static void dynamic_debug_setup(struct _ddebug *debug, unsigned int num)
 #endif
 }
 
+static void dynamic_debug_remove(struct _ddebug *debug)
+{
+	if (debug)
+		ddebug_remove_module(debug->modname);
+}
+
 static void *module_alloc_update_bounds(unsigned long size)
 {
 	void *ret = module_alloc(size);
 
 	if (ret) {
+		mutex_lock(&module_mutex);
 		/* Update module bounds. */
 		if ((unsigned long)ret < module_addr_min)
 			module_addr_min = (unsigned long)ret;
 		if ((unsigned long)ret + size > module_addr_max)
 			module_addr_max = (unsigned long)ret + size;
+		mutex_unlock(&module_mutex);
 	}
 	return ret;
 }
@@ -2014,6 +2131,9 @@ static noinline struct module *load_module(void __user *umod,
 	long err = 0;
 	void *ptr = NULL; /* Stops spurious gcc warning */
 	unsigned long symoffs, stroffs, *strmap;
+	void __percpu *percpu;
+	struct _ddebug *debug = NULL;
+	unsigned int num_debug = 0;
 
 	mm_segment_t old_fs;
 
@@ -2138,11 +2258,6 @@ static noinline struct module *load_module(void __user *umod,
 		goto free_mod;
 	}
 
-	if (find_module(mod->name)) {
-		err = -EEXIST;
-		goto free_mod;
-	}
-
 	mod->state = MODULE_STATE_COMING;
 
 	/* Allow arches to frob section contents and sizes.  */
@@ -2158,6 +2273,8 @@ static noinline struct module *load_module(void __user *umod,
 			goto free_mod;
 		sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
 	}
+	/* Keep this around for failure path. */
+	percpu = mod_percpu(mod);
 
 	/* Determine total sizes, and put offsets in sh_entsize.  For now
 	   this is done generically; there doesn't appear to be any
@@ -2231,11 +2348,6 @@ static noinline struct module *load_module(void __user *umod,
 	/* Now we've moved module, initialize linked lists, etc. */
 	module_unload_init(mod);
 
-	/* add kobject, so we can reference it. */
-	err = mod_sysfs_init(mod);
-	if (err)
-		goto free_unload;
-
 	/* Set up license info based on the info section */
 	set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
 
@@ -2360,11 +2472,6 @@ static noinline struct module *load_module(void __user *umod,
 			goto cleanup;
 	}
 
-        /* Find duplicate symbols */
-	err = verify_export_symbols(mod);
-	if (err < 0)
-		goto cleanup;
-
   	/* Set up and sort exception table */
 	mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table",
 				    sizeof(*mod->extable), &mod->num_exentries);
@@ -2379,15 +2486,9 @@ static noinline struct module *load_module(void __user *umod,
 	kfree(strmap);
 	strmap = NULL;
 
-	if (!mod->taints) {
-		struct _ddebug *debug;
-		unsigned int num_debug;
-
+	if (!mod->taints)
 		debug = section_objs(hdr, sechdrs, secstrings, "__verbose",
 				     sizeof(*debug), &num_debug);
-		if (debug)
-			dynamic_debug_setup(debug, num_debug);
-	}
 
 	err = module_finalize(hdr, sechdrs, mod);
 	if (err < 0)
@@ -2423,7 +2524,22 @@ static noinline struct module *load_module(void __user *umod,
 	 * function to insert in a way safe to concurrent readers.
 	 * The mutex protects against concurrent writers.
 	 */
+	mutex_lock(&module_mutex);
+	if (find_module(mod->name)) {
+		err = -EEXIST;
+		goto unlock;
+	}
+
+	if (debug)
+		dynamic_debug_setup(debug, num_debug);
+
+	/* Find duplicate symbols */
+	err = verify_export_symbols(mod);
+	if (err < 0)
+		goto ddebug;
+
 	list_add_rcu(&mod->list, &modules);
+	mutex_unlock(&module_mutex);
 
 	err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL);
 	if (err < 0)
@@ -2432,6 +2548,7 @@ static noinline struct module *load_module(void __user *umod,
 	err = mod_sysfs_setup(mod, mod->kp, mod->num_kp);
 	if (err < 0)
 		goto unlink;
+
 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
 	add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
 
@@ -2444,15 +2561,17 @@ static noinline struct module *load_module(void __user *umod,
 	return mod;
 
  unlink:
+	mutex_lock(&module_mutex);
 	/* Unlink carefully: kallsyms could be walking list. */
 	list_del_rcu(&mod->list);
+ ddebug:
+	dynamic_debug_remove(debug);
+ unlock:
+	mutex_unlock(&module_mutex);
 	synchronize_sched();
 	module_arch_cleanup(mod);
  cleanup:
 	free_modinfo(mod);
-	kobject_del(&mod->mkobj.kobj);
-	kobject_put(&mod->mkobj.kobj);
- free_unload:
 	module_unload_free(mod);
 #if defined(CONFIG_MODULE_UNLOAD)
 	free_percpu(mod->refptr);
@@ -2463,7 +2582,7 @@ static noinline struct module *load_module(void __user *umod,
 	module_free(mod, mod->module_core);
 	/* mod will be freed with core. Don't access it beyond this line! */
  free_percpu:
-	percpu_modfree(mod);
+	free_percpu(percpu);
  free_mod:
 	kfree(args);
 	kfree(strmap);
@@ -2499,19 +2618,10 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	if (!capable(CAP_SYS_MODULE) || modules_disabled)
 		return -EPERM;
 
-	/* Only one module load at a time, please */
-	if (mutex_lock_interruptible(&module_mutex) != 0)
-		return -EINTR;
-
 	/* Do all the hard work */
 	mod = load_module(umod, len, uargs);
-	if (IS_ERR(mod)) {
-		mutex_unlock(&module_mutex);
+	if (IS_ERR(mod))
 		return PTR_ERR(mod);
-	}
-
-	/* Drop lock so they can recurse */
-	mutex_unlock(&module_mutex);
 
 	blocking_notifier_call_chain(&module_notify_list,
 			MODULE_STATE_COMING, mod);
@@ -2528,9 +2638,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 		module_put(mod);
 		blocking_notifier_call_chain(&module_notify_list,
 					     MODULE_STATE_GOING, mod);
-		mutex_lock(&module_mutex);
 		free_module(mod);
-		mutex_unlock(&module_mutex);
 		wake_up(&module_wq);
 		return ret;
 	}
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index bd7ce8ca5bb..ff86c558af4 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -283,14 +283,15 @@ ctx_group_list(struct perf_event *event, struct perf_event_context *ctx)
 static void
 list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 {
-	struct perf_event *group_leader = event->group_leader;
+	WARN_ON_ONCE(event->attach_state & PERF_ATTACH_CONTEXT);
+	event->attach_state |= PERF_ATTACH_CONTEXT;
 
 	/*
-	 * Depending on whether it is a standalone or sibling event,
-	 * add it straight to the context's event list, or to the group
-	 * leader's sibling list:
+	 * If we're a stand alone event or group leader, we go to the context
+	 * list, group events are kept attached to the group so that
+	 * perf_group_detach can, at all times, locate all siblings.
 	 */
-	if (group_leader == event) {
+	if (event->group_leader == event) {
 		struct list_head *list;
 
 		if (is_software_event(event))
@@ -298,13 +299,6 @@ list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 
 		list = ctx_group_list(event, ctx);
 		list_add_tail(&event->group_entry, list);
-	} else {
-		if (group_leader->group_flags & PERF_GROUP_SOFTWARE &&
-		    !is_software_event(event))
-			group_leader->group_flags &= ~PERF_GROUP_SOFTWARE;
-
-		list_add_tail(&event->group_entry, &group_leader->sibling_list);
-		group_leader->nr_siblings++;
 	}
 
 	list_add_rcu(&event->event_entry, &ctx->event_list);
@@ -313,6 +307,24 @@ list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 		ctx->nr_stat++;
 }
 
+static void perf_group_attach(struct perf_event *event)
+{
+	struct perf_event *group_leader = event->group_leader;
+
+	WARN_ON_ONCE(event->attach_state & PERF_ATTACH_GROUP);
+	event->attach_state |= PERF_ATTACH_GROUP;
+
+	if (group_leader == event)
+		return;
+
+	if (group_leader->group_flags & PERF_GROUP_SOFTWARE &&
+			!is_software_event(event))
+		group_leader->group_flags &= ~PERF_GROUP_SOFTWARE;
+
+	list_add_tail(&event->group_entry, &group_leader->sibling_list);
+	group_leader->nr_siblings++;
+}
+
 /*
  * Remove a event from the lists for its context.
  * Must be called with ctx->mutex and ctx->lock held.
@@ -320,17 +332,22 @@ list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 static void
 list_del_event(struct perf_event *event, struct perf_event_context *ctx)
 {
-	if (list_empty(&event->group_entry))
+	/*
+	 * We can have double detach due to exit/hot-unplug + close.
+	 */
+	if (!(event->attach_state & PERF_ATTACH_CONTEXT))
 		return;
+
+	event->attach_state &= ~PERF_ATTACH_CONTEXT;
+
 	ctx->nr_events--;
 	if (event->attr.inherit_stat)
 		ctx->nr_stat--;
 
-	list_del_init(&event->group_entry);
 	list_del_rcu(&event->event_entry);
 
-	if (event->group_leader != event)
-		event->group_leader->nr_siblings--;
+	if (event->group_leader == event)
+		list_del_init(&event->group_entry);
 
 	update_group_times(event);
 
@@ -345,21 +362,39 @@ list_del_event(struct perf_event *event, struct perf_event_context *ctx)
 		event->state = PERF_EVENT_STATE_OFF;
 }
 
-static void
-perf_destroy_group(struct perf_event *event, struct perf_event_context *ctx)
+static void perf_group_detach(struct perf_event *event)
 {
 	struct perf_event *sibling, *tmp;
+	struct list_head *list = NULL;
+
+	/*
+	 * We can have double detach due to exit/hot-unplug + close.
+	 */
+	if (!(event->attach_state & PERF_ATTACH_GROUP))
+		return;
+
+	event->attach_state &= ~PERF_ATTACH_GROUP;
+
+	/*
+	 * If this is a sibling, remove it from its group.
+	 */
+	if (event->group_leader != event) {
+		list_del_init(&event->group_entry);
+		event->group_leader->nr_siblings--;
+		return;
+	}
+
+	if (!list_empty(&event->group_entry))
+		list = &event->group_entry;
 
 	/*
 	 * If this was a group event with sibling events then
 	 * upgrade the siblings to singleton events by adding them
-	 * to the context list directly:
+	 * to whatever list we are on.
 	 */
 	list_for_each_entry_safe(sibling, tmp, &event->sibling_list, group_entry) {
-		struct list_head *list;
-
-		list = ctx_group_list(event, ctx);
-		list_move_tail(&sibling->group_entry, list);
+		if (list)
+			list_move_tail(&sibling->group_entry, list);
 		sibling->group_leader = sibling;
 
 		/* Inherit group flags from the previous leader */
@@ -652,8 +687,11 @@ group_sched_in(struct perf_event *group_event,
 	if (txn)
 		pmu->start_txn(pmu);
 
-	if (event_sched_in(group_event, cpuctx, ctx))
+	if (event_sched_in(group_event, cpuctx, ctx)) {
+		if (txn)
+			pmu->cancel_txn(pmu);
 		return -EAGAIN;
+	}
 
 	/*
 	 * Schedule in siblings as one group (if any):
@@ -675,9 +713,6 @@ group_sched_in(struct perf_event *group_event,
 	}
 
 group_error:
-	if (txn)
-		pmu->cancel_txn(pmu);
-
 	/*
 	 * Groups can be scheduled in as one unit only, so undo any
 	 * partial group before returning:
@@ -689,6 +724,9 @@ group_error:
 	}
 	event_sched_out(group_event, cpuctx, ctx);
 
+	if (txn)
+		pmu->cancel_txn(pmu);
+
 	return -EAGAIN;
 }
 
@@ -727,6 +765,7 @@ static void add_event_to_ctx(struct perf_event *event,
 			       struct perf_event_context *ctx)
 {
 	list_add_event(event, ctx);
+	perf_group_attach(event);
 	event->tstamp_enabled = ctx->time;
 	event->tstamp_running = ctx->time;
 	event->tstamp_stopped = ctx->time;
@@ -1468,6 +1507,9 @@ do {					\
 		divisor = nsec * frequency;
 	}
 
+	if (!divisor)
+		return dividend;
+
 	return div64_u64(dividend, divisor);
 }
 
@@ -1490,7 +1532,7 @@ static int perf_event_start(struct perf_event *event)
 static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
 {
 	struct hw_perf_event *hwc = &event->hw;
-	u64 period, sample_period;
+	s64 period, sample_period;
 	s64 delta;
 
 	period = perf_calculate_period(event, nsec, count);
@@ -1841,6 +1883,7 @@ static void free_event_rcu(struct rcu_head *head)
 }
 
 static void perf_pending_sync(struct perf_event *event);
+static void perf_mmap_data_put(struct perf_mmap_data *data);
 
 static void free_event(struct perf_event *event)
 {
@@ -1856,9 +1899,9 @@ static void free_event(struct perf_event *event)
 			atomic_dec(&nr_task_events);
 	}
 
-	if (event->output) {
-		fput(event->output->filp);
-		event->output = NULL;
+	if (event->data) {
+		perf_mmap_data_put(event->data);
+		event->data = NULL;
 	}
 
 	if (event->destroy)
@@ -1893,8 +1936,8 @@ int perf_event_release_kernel(struct perf_event *event)
 	 */
 	mutex_lock_nested(&ctx->mutex, SINGLE_DEPTH_NESTING);
 	raw_spin_lock_irq(&ctx->lock);
+	perf_group_detach(event);
 	list_del_event(event, ctx);
-	perf_destroy_group(event, ctx);
 	raw_spin_unlock_irq(&ctx->lock);
 	mutex_unlock(&ctx->mutex);
 
@@ -2175,7 +2218,27 @@ unlock:
 	return ret;
 }
 
-static int perf_event_set_output(struct perf_event *event, int output_fd);
+static const struct file_operations perf_fops;
+
+static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+{
+	struct file *file;
+
+	file = fget_light(fd, fput_needed);
+	if (!file)
+		return ERR_PTR(-EBADF);
+
+	if (file->f_op != &perf_fops) {
+		fput_light(file, *fput_needed);
+		*fput_needed = 0;
+		return ERR_PTR(-EBADF);
+	}
+
+	return file->private_data;
+}
+
+static int perf_event_set_output(struct perf_event *event,
+				 struct perf_event *output_event);
 static int perf_event_set_filter(struct perf_event *event, void __user *arg);
 
 static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -2202,7 +2265,23 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return perf_event_period(event, (u64 __user *)arg);
 
 	case PERF_EVENT_IOC_SET_OUTPUT:
-		return perf_event_set_output(event, arg);
+	{
+		struct perf_event *output_event = NULL;
+		int fput_needed = 0;
+		int ret;
+
+		if (arg != -1) {
+			output_event = perf_fget_light(arg, &fput_needed);
+			if (IS_ERR(output_event))
+				return PTR_ERR(output_event);
+		}
+
+		ret = perf_event_set_output(event, output_event);
+		if (output_event)
+			fput_light(output_event->filp, fput_needed);
+
+		return ret;
+	}
 
 	case PERF_EVENT_IOC_SET_FILTER:
 		return perf_event_set_filter(event, (void __user *)arg);
@@ -2335,8 +2414,6 @@ perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
 	unsigned long size;
 	int i;
 
-	WARN_ON(atomic_read(&event->mmap_count));
-
 	size = sizeof(struct perf_mmap_data);
 	size += nr_pages * sizeof(void *);
 
@@ -2452,8 +2529,6 @@ perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
 	unsigned long size;
 	void *all_buf;
 
-	WARN_ON(atomic_read(&event->mmap_count));
-
 	size = sizeof(struct perf_mmap_data);
 	size += sizeof(void *);
 
@@ -2536,7 +2611,7 @@ perf_mmap_data_init(struct perf_event *event, struct perf_mmap_data *data)
 	if (!data->watermark)
 		data->watermark = max_size / 2;
 
-
+	atomic_set(&data->refcount, 1);
 	rcu_assign_pointer(event->data, data);
 }
 
@@ -2548,13 +2623,26 @@ static void perf_mmap_data_free_rcu(struct rcu_head *rcu_head)
 	perf_mmap_data_free(data);
 }
 
-static void perf_mmap_data_release(struct perf_event *event)
+static struct perf_mmap_data *perf_mmap_data_get(struct perf_event *event)
 {
-	struct perf_mmap_data *data = event->data;
+	struct perf_mmap_data *data;
+
+	rcu_read_lock();
+	data = rcu_dereference(event->data);
+	if (data) {
+		if (!atomic_inc_not_zero(&data->refcount))
+			data = NULL;
+	}
+	rcu_read_unlock();
+
+	return data;
+}
 
-	WARN_ON(atomic_read(&event->mmap_count));
+static void perf_mmap_data_put(struct perf_mmap_data *data)
+{
+	if (!atomic_dec_and_test(&data->refcount))
+		return;
 
-	rcu_assign_pointer(event->data, NULL);
 	call_rcu(&data->rcu_head, perf_mmap_data_free_rcu);
 }
 
@@ -2569,15 +2657,18 @@ static void perf_mmap_close(struct vm_area_struct *vma)
 {
 	struct perf_event *event = vma->vm_file->private_data;
 
-	WARN_ON_ONCE(event->ctx->parent_ctx);
 	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
 		unsigned long size = perf_data_size(event->data);
-		struct user_struct *user = current_user();
+		struct user_struct *user = event->mmap_user;
+		struct perf_mmap_data *data = event->data;
 
 		atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
-		vma->vm_mm->locked_vm -= event->data->nr_locked;
-		perf_mmap_data_release(event);
+		vma->vm_mm->locked_vm -= event->mmap_locked;
+		rcu_assign_pointer(event->data, NULL);
 		mutex_unlock(&event->mmap_mutex);
+
+		perf_mmap_data_put(data);
+		free_uid(user);
 	}
 }
 
@@ -2629,13 +2720,10 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
 	mutex_lock(&event->mmap_mutex);
-	if (event->output) {
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	if (atomic_inc_not_zero(&event->mmap_count)) {
-		if (nr_pages != event->data->nr_pages)
+	if (event->data) {
+		if (event->data->nr_pages == nr_pages)
+			atomic_inc(&event->data->refcount);
+		else
 			ret = -EINVAL;
 		goto unlock;
 	}
@@ -2667,21 +2755,23 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	WARN_ON(event->data);
 
 	data = perf_mmap_data_alloc(event, nr_pages);
-	ret = -ENOMEM;
-	if (!data)
+	if (!data) {
+		ret = -ENOMEM;
 		goto unlock;
+	}
 
-	ret = 0;
 	perf_mmap_data_init(event, data);
-
-	atomic_set(&event->mmap_count, 1);
-	atomic_long_add(user_extra, &user->locked_vm);
-	vma->vm_mm->locked_vm += extra;
-	event->data->nr_locked = extra;
 	if (vma->vm_flags & VM_WRITE)
 		event->data->writable = 1;
 
+	atomic_long_add(user_extra, &user->locked_vm);
+	event->mmap_locked = extra;
+	event->mmap_user = get_current_user();
+	vma->vm_mm->locked_vm += event->mmap_locked;
+
 unlock:
+	if (!ret)
+		atomic_inc(&event->mmap_count);
 	mutex_unlock(&event->mmap_mutex);
 
 	vma->vm_flags |= VM_RESERVED;
@@ -2977,6 +3067,7 @@ __always_inline void perf_output_copy(struct perf_output_handle *handle,
 
 		len -= size;
 		handle->addr += size;
+		buf += size;
 		handle->size -= size;
 		if (!handle->size) {
 			struct perf_mmap_data *data = handle->data;
@@ -2993,7 +3084,6 @@ int perf_output_begin(struct perf_output_handle *handle,
 		      struct perf_event *event, unsigned int size,
 		      int nmi, int sample)
 {
-	struct perf_event *output_event;
 	struct perf_mmap_data *data;
 	unsigned long tail, offset, head;
 	int have_lost;
@@ -3010,10 +3100,6 @@ int perf_output_begin(struct perf_output_handle *handle,
 	if (event->parent)
 		event = event->parent;
 
-	output_event = rcu_dereference(event->output);
-	if (output_event)
-		event = output_event;
-
 	data = rcu_dereference(event->data);
 	if (!data)
 		goto out;
@@ -3972,13 +4058,6 @@ static void perf_swevent_overflow(struct perf_event *event, u64 overflow,
 	}
 }
 
-static void perf_swevent_unthrottle(struct perf_event *event)
-{
-	/*
-	 * Nothing to do, we already reset hwc->interrupts.
-	 */
-}
-
 static void perf_swevent_add(struct perf_event *event, u64 nr,
 			       int nmi, struct perf_sample_data *data,
 			       struct pt_regs *regs)
@@ -4193,11 +4272,22 @@ static void perf_swevent_disable(struct perf_event *event)
 	hlist_del_rcu(&event->hlist_entry);
 }
 
+static void perf_swevent_void(struct perf_event *event)
+{
+}
+
+static int perf_swevent_int(struct perf_event *event)
+{
+	return 0;
+}
+
 static const struct pmu perf_ops_generic = {
 	.enable		= perf_swevent_enable,
 	.disable	= perf_swevent_disable,
+	.start		= perf_swevent_int,
+	.stop		= perf_swevent_void,
 	.read		= perf_swevent_read,
-	.unthrottle	= perf_swevent_unthrottle,
+	.unthrottle	= perf_swevent_void, /* hwc->interrupts already reset */
 };
 
 /*
@@ -4478,8 +4568,10 @@ static int swevent_hlist_get(struct perf_event *event)
 static const struct pmu perf_ops_tracepoint = {
 	.enable		= perf_trace_enable,
 	.disable	= perf_trace_disable,
+	.start		= perf_swevent_int,
+	.stop		= perf_swevent_void,
 	.read		= perf_swevent_read,
-	.unthrottle	= perf_swevent_unthrottle,
+	.unthrottle	= perf_swevent_void,
 };
 
 static int perf_tp_filter_match(struct perf_event *event,
@@ -4912,39 +5004,17 @@ err_size:
 	goto out;
 }
 
-static int perf_event_set_output(struct perf_event *event, int output_fd)
+static int
+perf_event_set_output(struct perf_event *event, struct perf_event *output_event)
 {
-	struct perf_event *output_event = NULL;
-	struct file *output_file = NULL;
-	struct perf_event *old_output;
-	int fput_needed = 0;
+	struct perf_mmap_data *data = NULL, *old_data = NULL;
 	int ret = -EINVAL;
 
-	/*
-	 * Don't allow output of inherited per-task events. This would
-	 * create performance issues due to cross cpu access.
-	 */
-	if (event->cpu == -1 && event->attr.inherit)
-		return -EINVAL;
-
-	if (!output_fd)
+	if (!output_event)
 		goto set;
 
-	output_file = fget_light(output_fd, &fput_needed);
-	if (!output_file)
-		return -EBADF;
-
-	if (output_file->f_op != &perf_fops)
-		goto out;
-
-	output_event = output_file->private_data;
-
-	/* Don't chain output fds */
-	if (output_event->output)
-		goto out;
-
-	/* Don't set an output fd when we already have an output channel */
-	if (event->data)
+	/* don't allow circular references */
+	if (event == output_event)
 		goto out;
 
 	/*
@@ -4959,26 +5029,28 @@ static int perf_event_set_output(struct perf_event *event, int output_fd)
 	if (output_event->cpu == -1 && output_event->ctx != event->ctx)
 		goto out;
 
-	atomic_long_inc(&output_file->f_count);
-
 set:
 	mutex_lock(&event->mmap_mutex);
-	old_output = event->output;
-	rcu_assign_pointer(event->output, output_event);
-	mutex_unlock(&event->mmap_mutex);
+	/* Can't redirect output if we've got an active mmap() */
+	if (atomic_read(&event->mmap_count))
+		goto unlock;
 
-	if (old_output) {
-		/*
-		 * we need to make sure no existing perf_output_*()
-		 * is still referencing this event.
-		 */
-		synchronize_rcu();
-		fput(old_output->filp);
+	if (output_event) {
+		/* get the buffer we want to redirect to */
+		data = perf_mmap_data_get(output_event);
+		if (!data)
+			goto unlock;
 	}
 
+	old_data = event->data;
+	rcu_assign_pointer(event->data, data);
 	ret = 0;
+unlock:
+	mutex_unlock(&event->mmap_mutex);
+
+	if (old_data)
+		perf_mmap_data_put(old_data);
 out:
-	fput_light(output_file, fput_needed);
 	return ret;
 }
 
@@ -4994,7 +5066,7 @@ SYSCALL_DEFINE5(perf_event_open,
 		struct perf_event_attr __user *, attr_uptr,
 		pid_t, pid, int, cpu, int, group_fd, unsigned long, flags)
 {
-	struct perf_event *event, *group_leader;
+	struct perf_event *event, *group_leader = NULL, *output_event = NULL;
 	struct perf_event_attr attr;
 	struct perf_event_context *ctx;
 	struct file *event_file = NULL;
@@ -5034,19 +5106,25 @@ SYSCALL_DEFINE5(perf_event_open,
 		goto err_fd;
 	}
 
+	if (group_fd != -1) {
+		group_leader = perf_fget_light(group_fd, &fput_needed);
+		if (IS_ERR(group_leader)) {
+			err = PTR_ERR(group_leader);
+			goto err_put_context;
+		}
+		group_file = group_leader->filp;
+		if (flags & PERF_FLAG_FD_OUTPUT)
+			output_event = group_leader;
+		if (flags & PERF_FLAG_FD_NO_GROUP)
+			group_leader = NULL;
+	}
+
 	/*
 	 * Look up the group leader (we will attach this event to it):
 	 */
-	group_leader = NULL;
-	if (group_fd != -1 && !(flags & PERF_FLAG_FD_NO_GROUP)) {
+	if (group_leader) {
 		err = -EINVAL;
-		group_file = fget_light(group_fd, &fput_needed);
-		if (!group_file)
-			goto err_put_context;
-		if (group_file->f_op != &perf_fops)
-			goto err_put_context;
 
-		group_leader = group_file->private_data;
 		/*
 		 * Do not allow a recursive hierarchy (this new sibling
 		 * becoming part of another group-sibling):
@@ -5068,9 +5146,16 @@ SYSCALL_DEFINE5(perf_event_open,
 
 	event = perf_event_alloc(&attr, cpu, ctx, group_leader,
 				     NULL, NULL, GFP_KERNEL);
-	err = PTR_ERR(event);
-	if (IS_ERR(event))
+	if (IS_ERR(event)) {
+		err = PTR_ERR(event);
 		goto err_put_context;
+	}
+
+	if (output_event) {
+		err = perf_event_set_output(event, output_event);
+		if (err)
+			goto err_free_put_context;
+	}
 
 	event_file = anon_inode_getfile("[perf_event]", &perf_fops, event, O_RDWR);
 	if (IS_ERR(event_file)) {
@@ -5078,12 +5163,6 @@ SYSCALL_DEFINE5(perf_event_open,
 		goto err_free_put_context;
 	}
 
-	if (flags & PERF_FLAG_FD_OUTPUT) {
-		err = perf_event_set_output(event, group_fd);
-		if (err)
-			goto err_fput_free_put_context;
-	}
-
 	event->filp = event_file;
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
@@ -5097,12 +5176,16 @@ SYSCALL_DEFINE5(perf_event_open,
 	list_add_tail(&event->owner_entry, &current->perf_event_list);
 	mutex_unlock(&current->perf_event_mutex);
 
+	/*
+	 * Drop the reference on the group_event after placing the
+	 * new event on the sibling_list. This ensures destruction
+	 * of the group leader will find the pointer to itself in
+	 * perf_group_detach().
+	 */
 	fput_light(group_file, fput_needed);
 	fd_install(event_fd, event_file);
 	return event_fd;
 
-err_fput_free_put_context:
-	fput(event_file);
 err_free_put_context:
 	free_event(event);
 err_put_context:
@@ -5420,6 +5503,7 @@ static void perf_free_event(struct perf_event *event,
 
 	fput(parent->filp);
 
+	perf_group_detach(event);
 	list_del_event(event, ctx);
 	free_event(event);
 }
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index f42d3f737a3..996a4dec5f9 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -48,59 +48,49 @@
  * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
  * held, taken with _irqsave.  One lock to rule them all
  */
-struct pm_qos_request_list {
-	struct list_head list;
-	union {
-		s32 value;
-		s32 usec;
-		s32 kbps;
-	};
-	int pm_qos_class;
+enum pm_qos_type {
+	PM_QOS_MAX,		/* return the largest value */
+	PM_QOS_MIN		/* return the smallest value */
 };
 
-static s32 max_compare(s32 v1, s32 v2);
-static s32 min_compare(s32 v1, s32 v2);
-
 struct pm_qos_object {
-	struct pm_qos_request_list requests;
+	struct plist_head requests;
 	struct blocking_notifier_head *notifiers;
 	struct miscdevice pm_qos_power_miscdev;
 	char *name;
 	s32 default_value;
-	atomic_t target_value;
-	s32 (*comparitor)(s32, s32);
+	enum pm_qos_type type;
 };
 
+static DEFINE_SPINLOCK(pm_qos_lock);
+
 static struct pm_qos_object null_pm_qos;
 static BLOCKING_NOTIFIER_HEAD(cpu_dma_lat_notifier);
 static struct pm_qos_object cpu_dma_pm_qos = {
-	.requests = {LIST_HEAD_INIT(cpu_dma_pm_qos.requests.list)},
+	.requests = PLIST_HEAD_INIT(cpu_dma_pm_qos.requests, pm_qos_lock),
 	.notifiers = &cpu_dma_lat_notifier,
 	.name = "cpu_dma_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
-	.comparitor = min_compare
+	.type = PM_QOS_MIN,
 };
 
 static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
 static struct pm_qos_object network_lat_pm_qos = {
-	.requests = {LIST_HEAD_INIT(network_lat_pm_qos.requests.list)},
+	.requests = PLIST_HEAD_INIT(network_lat_pm_qos.requests, pm_qos_lock),
 	.notifiers = &network_lat_notifier,
 	.name = "network_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
-	.comparitor = min_compare
+	.type = PM_QOS_MIN
 };
 
 
 static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier);
 static struct pm_qos_object network_throughput_pm_qos = {
-	.requests = {LIST_HEAD_INIT(network_throughput_pm_qos.requests.list)},
+	.requests = PLIST_HEAD_INIT(network_throughput_pm_qos.requests, pm_qos_lock),
 	.notifiers = &network_throughput_notifier,
 	.name = "network_throughput",
 	.default_value = 0,
-	.target_value = ATOMIC_INIT(0),
-	.comparitor = max_compare
+	.type = PM_QOS_MAX,
 };
 
 
@@ -111,8 +101,6 @@ static struct pm_qos_object *pm_qos_array[] = {
 	&network_throughput_pm_qos
 };
 
-static DEFINE_SPINLOCK(pm_qos_lock);
-
 static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
 		size_t count, loff_t *f_pos);
 static int pm_qos_power_open(struct inode *inode, struct file *filp);
@@ -124,46 +112,55 @@ static const struct file_operations pm_qos_power_fops = {
 	.release = pm_qos_power_release,
 };
 
-/* static helper functions */
-static s32 max_compare(s32 v1, s32 v2)
+/* unlocked internal variant */
+static inline int pm_qos_get_value(struct pm_qos_object *o)
 {
-	return max(v1, v2);
-}
+	if (plist_head_empty(&o->requests))
+		return o->default_value;
 
-static s32 min_compare(s32 v1, s32 v2)
-{
-	return min(v1, v2);
-}
+	switch (o->type) {
+	case PM_QOS_MIN:
+		return plist_last(&o->requests)->prio;
 
+	case PM_QOS_MAX:
+		return plist_first(&o->requests)->prio;
 
-static void update_target(int pm_qos_class)
+	default:
+		/* runtime check for not using enum */
+		BUG();
+	}
+}
+
+static void update_target(struct pm_qos_object *o, struct plist_node *node,
+			  int del, int value)
 {
-	s32 extreme_value;
-	struct pm_qos_request_list *node;
 	unsigned long flags;
-	int call_notifier = 0;
+	int prev_value, curr_value;
 
 	spin_lock_irqsave(&pm_qos_lock, flags);
-	extreme_value = pm_qos_array[pm_qos_class]->default_value;
-	list_for_each_entry(node,
-			&pm_qos_array[pm_qos_class]->requests.list, list) {
-		extreme_value = pm_qos_array[pm_qos_class]->comparitor(
-				extreme_value, node->value);
-	}
-	if (atomic_read(&pm_qos_array[pm_qos_class]->target_value) !=
-			extreme_value) {
-		call_notifier = 1;
-		atomic_set(&pm_qos_array[pm_qos_class]->target_value,
-				extreme_value);
-		pr_debug(KERN_ERR "new target for qos %d is %d\n", pm_qos_class,
-			atomic_read(&pm_qos_array[pm_qos_class]->target_value));
+	prev_value = pm_qos_get_value(o);
+	/* PM_QOS_DEFAULT_VALUE is a signal that the value is unchanged */
+	if (value != PM_QOS_DEFAULT_VALUE) {
+		/*
+		 * to change the list, we atomically remove, reinit
+		 * with new value and add, then see if the extremal
+		 * changed
+		 */
+		plist_del(node, &o->requests);
+		plist_node_init(node, value);
+		plist_add(node, &o->requests);
+	} else if (del) {
+		plist_del(node, &o->requests);
+	} else {
+		plist_add(node, &o->requests);
 	}
+	curr_value = pm_qos_get_value(o);
 	spin_unlock_irqrestore(&pm_qos_lock, flags);
 
-	if (call_notifier)
-		blocking_notifier_call_chain(
-				pm_qos_array[pm_qos_class]->notifiers,
-					(unsigned long) extreme_value, NULL);
+	if (prev_value != curr_value)
+		blocking_notifier_call_chain(o->notifiers,
+					     (unsigned long)curr_value,
+					     NULL);
 }
 
 static int register_pm_qos_misc(struct pm_qos_object *qos)
@@ -196,10 +193,23 @@ static int find_pm_qos_object_by_minor(int minor)
  */
 int pm_qos_request(int pm_qos_class)
 {
-	return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
+	unsigned long flags;
+	int value;
+
+	spin_lock_irqsave(&pm_qos_lock, flags);
+	value = pm_qos_get_value(pm_qos_array[pm_qos_class]);
+	spin_unlock_irqrestore(&pm_qos_lock, flags);
+
+	return value;
 }
 EXPORT_SYMBOL_GPL(pm_qos_request);
 
+int pm_qos_request_active(struct pm_qos_request_list *req)
+{
+	return req->pm_qos_class != 0;
+}
+EXPORT_SYMBOL_GPL(pm_qos_request_active);
+
 /**
  * pm_qos_add_request - inserts new qos request into the list
  * @pm_qos_class: identifies which list of qos request to us
@@ -211,27 +221,23 @@ EXPORT_SYMBOL_GPL(pm_qos_request);
  * element as a handle for use in updating and removal.  Call needs to save
  * this handle for later use.
  */
-struct pm_qos_request_list *pm_qos_add_request(int pm_qos_class, s32 value)
+void pm_qos_add_request(struct pm_qos_request_list *dep,
+			int pm_qos_class, s32 value)
 {
-	struct pm_qos_request_list *dep;
-	unsigned long flags;
+	struct pm_qos_object *o =  pm_qos_array[pm_qos_class];
+	int new_value;
 
-	dep = kzalloc(sizeof(struct pm_qos_request_list), GFP_KERNEL);
-	if (dep) {
-		if (value == PM_QOS_DEFAULT_VALUE)
-			dep->value = pm_qos_array[pm_qos_class]->default_value;
-		else
-			dep->value = value;
-		dep->pm_qos_class = pm_qos_class;
-
-		spin_lock_irqsave(&pm_qos_lock, flags);
-		list_add(&dep->list,
-			&pm_qos_array[pm_qos_class]->requests.list);
-		spin_unlock_irqrestore(&pm_qos_lock, flags);
-		update_target(pm_qos_class);
+	if (pm_qos_request_active(dep)) {
+		WARN(1, KERN_ERR "pm_qos_add_request() called for already added request\n");
+		return;
 	}
-
-	return dep;
+	if (value == PM_QOS_DEFAULT_VALUE)
+		new_value = o->default_value;
+	else
+		new_value = value;
+	plist_node_init(&dep->list, new_value);
+	dep->pm_qos_class = pm_qos_class;
+	update_target(o, &dep->list, 0, PM_QOS_DEFAULT_VALUE);
 }
 EXPORT_SYMBOL_GPL(pm_qos_add_request);
 
@@ -246,27 +252,28 @@ EXPORT_SYMBOL_GPL(pm_qos_add_request);
  * Attempts are made to make this code callable on hot code paths.
  */
 void pm_qos_update_request(struct pm_qos_request_list *pm_qos_req,
-		s32 new_value)
+			   s32 new_value)
 {
-	unsigned long flags;
-	int pending_update = 0;
 	s32 temp;
+	struct pm_qos_object *o;
+
+	if (!pm_qos_req) /*guard against callers passing in null */
+		return;
 
-	if (pm_qos_req) { /*guard against callers passing in null */
-		spin_lock_irqsave(&pm_qos_lock, flags);
-		if (new_value == PM_QOS_DEFAULT_VALUE)
-			temp = pm_qos_array[pm_qos_req->pm_qos_class]->default_value;
-		else
-			temp = new_value;
-
-		if (temp != pm_qos_req->value) {
-			pending_update = 1;
-			pm_qos_req->value = temp;
-		}
-		spin_unlock_irqrestore(&pm_qos_lock, flags);
-		if (pending_update)
-			update_target(pm_qos_req->pm_qos_class);
+	if (!pm_qos_request_active(pm_qos_req)) {
+		WARN(1, KERN_ERR "pm_qos_update_request() called for unknown object\n");
+		return;
 	}
+
+	o = pm_qos_array[pm_qos_req->pm_qos_class];
+
+	if (new_value == PM_QOS_DEFAULT_VALUE)
+		temp = o->default_value;
+	else
+		temp = new_value;
+
+	if (temp != pm_qos_req->list.prio)
+		update_target(o, &pm_qos_req->list, 0, temp);
 }
 EXPORT_SYMBOL_GPL(pm_qos_update_request);
 
@@ -280,19 +287,20 @@ EXPORT_SYMBOL_GPL(pm_qos_update_request);
  */
 void pm_qos_remove_request(struct pm_qos_request_list *pm_qos_req)
 {
-	unsigned long flags;
-	int qos_class;
+	struct pm_qos_object *o;
 
 	if (pm_qos_req == NULL)
 		return;
 		/* silent return to keep pcm code cleaner */
 
-	qos_class = pm_qos_req->pm_qos_class;
-	spin_lock_irqsave(&pm_qos_lock, flags);
-	list_del(&pm_qos_req->list);
-	kfree(pm_qos_req);
-	spin_unlock_irqrestore(&pm_qos_lock, flags);
-	update_target(qos_class);
+	if (!pm_qos_request_active(pm_qos_req)) {
+		WARN(1, KERN_ERR "pm_qos_remove_request() called for unknown object\n");
+		return;
+	}
+
+	o = pm_qos_array[pm_qos_req->pm_qos_class];
+	update_target(o, &pm_qos_req->list, 1, PM_QOS_DEFAULT_VALUE);
+	memset(pm_qos_req, 0, sizeof(*pm_qos_req));
 }
 EXPORT_SYMBOL_GPL(pm_qos_remove_request);
 
@@ -340,8 +348,12 @@ static int pm_qos_power_open(struct inode *inode, struct file *filp)
 
 	pm_qos_class = find_pm_qos_object_by_minor(iminor(inode));
 	if (pm_qos_class >= 0) {
-		filp->private_data = (void *) pm_qos_add_request(pm_qos_class,
-				PM_QOS_DEFAULT_VALUE);
+		struct pm_qos_request_list *req = kzalloc(GFP_KERNEL, sizeof(*req));
+		if (!req)
+			return -ENOMEM;
+
+		pm_qos_add_request(req, pm_qos_class, PM_QOS_DEFAULT_VALUE);
+		filp->private_data = req;
 
 		if (filp->private_data)
 			return 0;
@@ -353,8 +365,9 @@ static int pm_qos_power_release(struct inode *inode, struct file *filp)
 {
 	struct pm_qos_request_list *req;
 
-	req = (struct pm_qos_request_list *)filp->private_data;
+	req = filp->private_data;
 	pm_qos_remove_request(req);
+	kfree(req);
 
 	return 0;
 }
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5c36ea9d55d..ca6066a6952 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -99,9 +99,13 @@ config PM_SLEEP_ADVANCED_DEBUG
 	depends on PM_ADVANCED_DEBUG
 	default n
 
+config SUSPEND_NVS
+       bool
+
 config SUSPEND
 	bool "Suspend to RAM and standby"
 	depends on PM && ARCH_SUSPEND_POSSIBLE
+	select SUSPEND_NVS if HAS_IOMEM
 	default y
 	---help---
 	  Allow the system to enter sleep states in which main memory is
@@ -130,13 +134,10 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
-config HIBERNATION_NVS
-	bool
-
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
-	select HIBERNATION_NVS if HAS_IOMEM
+	select SUSPEND_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 524e058dcf0..f9063c6b185 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -10,6 +10,6 @@ obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o user.o \
 				   block_io.o
-obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
+obj-$(CONFIG_SUSPEND_NVS)	+= nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index aa9e916da4d..d26f04e9274 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -277,7 +277,7 @@ static int create_image(int platform_mode)
 		goto Enable_irqs;
 	}
 
-	if (hibernation_test(TEST_CORE))
+	if (hibernation_test(TEST_CORE) || !pm_check_wakeup_events())
 		goto Power_up;
 
 	in_suspend = 1;
@@ -288,8 +288,10 @@ static int create_image(int platform_mode)
 			error);
 	/* Restore control flow magically appears here */
 	restore_processor_state();
-	if (!in_suspend)
+	if (!in_suspend) {
+		events_check_enabled = false;
 		platform_leave(platform_mode);
+	}
 
  Power_up:
 	sysdev_resume();
@@ -328,7 +330,7 @@ int hibernation_snapshot(int platform_mode)
 
 	error = platform_begin(platform_mode);
 	if (error)
-		return error;
+		goto Close;
 
 	/* Preallocate image memory before shutting down devices. */
 	error = hibernate_preallocate_memory();
@@ -511,18 +513,24 @@ int hibernation_platform_enter(void)
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_HIBERNATE);
+	if (!pm_check_wakeup_events()) {
+		error = -EAGAIN;
+		goto Power_up;
+	}
+
 	hibernation_ops->enter();
 	/* We should never get here */
 	while (1);
 
-	/*
-	 * We don't need to reenable the nonboot CPUs or resume consoles, since
-	 * the system is going to be halted anyway.
-	 */
+ Power_up:
+	sysdev_resume();
+	local_irq_enable();
+	enable_nonboot_cpus();
+
  Platform_finish:
 	hibernation_ops->finish();
 
-	dpm_suspend_noirq(PMSG_RESTORE);
+	dpm_resume_noirq(PMSG_RESTORE);
 
  Resume_devices:
 	entering_platform_hibernation = false;
diff --git a/kernel/power/main.c b/kernel/power/main.c
index b58800b21fc..62b0bc6e498 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -204,6 +204,60 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr,
 
 power_attr(state);
 
+#ifdef CONFIG_PM_SLEEP
+/*
+ * The 'wakeup_count' attribute, along with the functions defined in
+ * drivers/base/power/wakeup.c, provides a means by which wakeup events can be
+ * handled in a non-racy way.
+ *
+ * If a wakeup event occurs when the system is in a sleep state, it simply is
+ * woken up.  In turn, if an event that would wake the system up from a sleep
+ * state occurs when it is undergoing a transition to that sleep state, the
+ * transition should be aborted.  Moreover, if such an event occurs when the
+ * system is in the working state, an attempt to start a transition to the
+ * given sleep state should fail during certain period after the detection of
+ * the event.  Using the 'state' attribute alone is not sufficient to satisfy
+ * these requirements, because a wakeup event may occur exactly when 'state'
+ * is being written to and may be delivered to user space right before it is
+ * frozen, so the event will remain only partially processed until the system is
+ * woken up by another event.  In particular, it won't cause the transition to
+ * a sleep state to be aborted.
+ *
+ * This difficulty may be overcome if user space uses 'wakeup_count' before
+ * writing to 'state'.  It first should read from 'wakeup_count' and store
+ * the read value.  Then, after carrying out its own preparations for the system
+ * transition to a sleep state, it should write the stored value to
+ * 'wakeup_count'.  If that fails, at least one wakeup event has occured since
+ * 'wakeup_count' was read and 'state' should not be written to.  Otherwise, it
+ * is allowed to write to 'state', but the transition will be aborted if there
+ * are any wakeup events detected after 'wakeup_count' was written to.
+ */
+
+static ssize_t wakeup_count_show(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				char *buf)
+{
+	unsigned long val;
+
+	return pm_get_wakeup_count(&val) ? sprintf(buf, "%lu\n", val) : -EINTR;
+}
+
+static ssize_t wakeup_count_store(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				const char *buf, size_t n)
+{
+	unsigned long val;
+
+	if (sscanf(buf, "%lu", &val) == 1) {
+		if (pm_save_wakeup_count(val))
+			return n;
+	}
+	return -EINVAL;
+}
+
+power_attr(wakeup_count);
+#endif /* CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_PM_TRACE
 int pm_trace_enabled;
 
@@ -236,6 +290,7 @@ static struct attribute * g[] = {
 #endif
 #ifdef CONFIG_PM_SLEEP
 	&pm_async_attr.attr,
+	&wakeup_count_attr.attr,
 #ifdef CONFIG_PM_DEBUG
 	&pm_test_attr.attr,
 #endif
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/nvs.c
index fdcad9ed5a7..1836db60bbb 100644
--- a/kernel/power/hibernate_nvs.c
+++ b/kernel/power/nvs.c
@@ -15,7 +15,7 @@
 
 /*
  * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
+ * suspend and to restore the contents of this memory during the subsequent
  * resume.  The code below implements a mechanism allowing us to do that.
  */
 
@@ -30,7 +30,7 @@ struct nvs_page {
 static LIST_HEAD(nvs_list);
 
 /**
- *	hibernate_nvs_register - register platform NVS memory region to save
+ *	suspend_nvs_register - register platform NVS memory region to save
  *	@start - physical address of the region
  *	@size - size of the region
  *
@@ -38,7 +38,7 @@ static LIST_HEAD(nvs_list);
  *	things so that the data from page-aligned addresses in this region will
  *	be copied into separate RAM pages.
  */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
+int suspend_nvs_register(unsigned long start, unsigned long size)
 {
 	struct nvs_page *entry, *next;
 
@@ -68,9 +68,9 @@ int hibernate_nvs_register(unsigned long start, unsigned long size)
 }
 
 /**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
+ *	suspend_nvs_free - free data pages allocated for saving NVS regions
  */
-void hibernate_nvs_free(void)
+void suspend_nvs_free(void)
 {
 	struct nvs_page *entry;
 
@@ -86,16 +86,16 @@ void hibernate_nvs_free(void)
 }
 
 /**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ *	suspend_nvs_alloc - allocate memory necessary for saving NVS regions
  */
-int hibernate_nvs_alloc(void)
+int suspend_nvs_alloc(void)
 {
 	struct nvs_page *entry;
 
 	list_for_each_entry(entry, &nvs_list, node) {
 		entry->data = (void *)__get_free_page(GFP_KERNEL);
 		if (!entry->data) {
-			hibernate_nvs_free();
+			suspend_nvs_free();
 			return -ENOMEM;
 		}
 	}
@@ -103,9 +103,9 @@ int hibernate_nvs_alloc(void)
 }
 
 /**
- *	hibernate_nvs_save - save NVS memory regions
+ *	suspend_nvs_save - save NVS memory regions
  */
-void hibernate_nvs_save(void)
+void suspend_nvs_save(void)
 {
 	struct nvs_page *entry;
 
@@ -119,12 +119,12 @@ void hibernate_nvs_save(void)
 }
 
 /**
- *	hibernate_nvs_restore - restore NVS memory regions
+ *	suspend_nvs_restore - restore NVS memory regions
  *
  *	This function is going to be called with interrupts disabled, so it
  *	cannot iounmap the virtual addresses used to access the NVS region.
  */
-void hibernate_nvs_restore(void)
+void suspend_nvs_restore(void)
 {
 	struct nvs_page *entry;
 
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 56e7dbb8b99..7335952ee47 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -16,6 +16,12 @@
 #include <linux/cpu.h>
 #include <linux/syscalls.h>
 #include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
 
 #include "power.h"
 
@@ -130,19 +136,19 @@ static int suspend_enter(suspend_state_t state)
 	if (suspend_ops->prepare) {
 		error = suspend_ops->prepare();
 		if (error)
-			return error;
+			goto Platform_finish;
 	}
 
 	error = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down\n");
-		goto Platfrom_finish;
+		goto Platform_finish;
 	}
 
 	if (suspend_ops->prepare_late) {
 		error = suspend_ops->prepare_late();
 		if (error)
-			goto Power_up_devices;
+			goto Platform_wake;
 	}
 
 	if (suspend_test(TEST_PLATFORM))
@@ -157,8 +163,10 @@ static int suspend_enter(suspend_state_t state)
 
 	error = sysdev_suspend(PMSG_SUSPEND);
 	if (!error) {
-		if (!suspend_test(TEST_CORE))
+		if (!suspend_test(TEST_CORE) && pm_check_wakeup_events()) {
 			error = suspend_ops->enter(state);
+			events_check_enabled = false;
+		}
 		sysdev_resume();
 	}
 
@@ -172,10 +180,9 @@ static int suspend_enter(suspend_state_t state)
 	if (suspend_ops->wake)
 		suspend_ops->wake();
 
- Power_up_devices:
 	dpm_resume_noirq(PMSG_RESUME);
 
- Platfrom_finish:
+ Platform_finish:
 	if (suspend_ops->finish)
 		suspend_ops->finish();
 
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b0bb2177839..7c3ae83e41d 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -32,7 +32,7 @@
 /*
  *	The swap map is a data structure used for keeping track of each page
  *	written to a swap partition.  It consists of many swap_map_page
- *	structures that contain each an array of MAP_PAGE_SIZE swap entries.
+ *	structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
  *	These structures are stored on the swap and linked together with the
  *	help of the .next_swap member.
  *
@@ -148,7 +148,7 @@ sector_t alloc_swapdev_block(int swap)
 
 /**
  *	free_all_swap_pages - free swap pages allocated for saving image data.
- *	It also frees the extents used to register which swap entres had been
+ *	It also frees the extents used to register which swap entries had been
  *	allocated.
  */
 
diff --git a/kernel/sched.c b/kernel/sched.c
index d4840814250..f52a8801b7a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -306,52 +306,6 @@ static int init_task_group_load = INIT_TASK_GROUP_LOAD;
  */
 struct task_group init_task_group;
 
-/* return group to which a task belongs */
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	struct task_group *tg;
-
-#ifdef CONFIG_CGROUP_SCHED
-	tg = container_of(task_subsys_state(p, cpu_cgroup_subsys_id),
-				struct task_group, css);
-#else
-	tg = &init_task_group;
-#endif
-	return tg;
-}
-
-/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
-{
-	/*
-	 * Strictly speaking this rcu_read_lock() is not needed since the
-	 * task_group is tied to the cgroup, which in turn can never go away
-	 * as long as there are tasks attached to it.
-	 *
-	 * However since task_group() uses task_subsys_state() which is an
-	 * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
-	 */
-	rcu_read_lock();
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
-	p->se.parent = task_group(p)->se[cpu];
-#endif
-
-#ifdef CONFIG_RT_GROUP_SCHED
-	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
-	p->rt.parent = task_group(p)->rt_se[cpu];
-#endif
-	rcu_read_unlock();
-}
-
-#else
-
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	return NULL;
-}
-
 #endif	/* CONFIG_CGROUP_SCHED */
 
 /* CFS-related fields in a runqueue */
@@ -544,6 +498,8 @@ struct rq {
 	struct root_domain *rd;
 	struct sched_domain *sd;
 
+	unsigned long cpu_power;
+
 	unsigned char idle_at_tick;
 	/* For active balancing */
 	int post_schedule;
@@ -642,6 +598,49 @@ static inline int cpu_of(struct rq *rq)
 #define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
 #define raw_rq()		(&__raw_get_cpu_var(runqueues))
 
+#ifdef CONFIG_CGROUP_SCHED
+
+/*
+ * Return the group to which this tasks belongs.
+ *
+ * We use task_subsys_state_check() and extend the RCU verification
+ * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * holds that lock for each task it moves into the cgroup. Therefore
+ * by holding that lock, we pin the task to the current cgroup.
+ */
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	struct cgroup_subsys_state *css;
+
+	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
+			lockdep_is_held(&task_rq(p)->lock));
+	return container_of(css, struct task_group, css);
+}
+
+/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
+{
+#ifdef CONFIG_FAIR_GROUP_SCHED
+	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
+	p->se.parent = task_group(p)->se[cpu];
+#endif
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
+	p->rt.parent = task_group(p)->rt_se[cpu];
+#endif
+}
+
+#else /* CONFIG_CGROUP_SCHED */
+
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_CGROUP_SCHED */
+
 inline void update_rq_clock(struct rq *rq)
 {
 	if (!rq->skip_clock_update)
@@ -1255,6 +1254,12 @@ static void sched_avg_update(struct rq *rq)
 	s64 period = sched_avg_period();
 
 	while ((s64)(rq->clock - rq->age_stamp) > period) {
+		/*
+		 * Inline assembly required to prevent the compiler
+		 * optimising this loop into a divmod call.
+		 * See __iter_div_u64_rem() for another example of this.
+		 */
+		asm("" : "+rm" (rq->age_stamp));
 		rq->age_stamp += period;
 		rq->rt_avg /= 2;
 	}
@@ -1499,24 +1504,9 @@ static unsigned long target_load(int cpu, int type)
 	return max(rq->cpu_load[type-1], total);
 }
 
-static struct sched_group *group_of(int cpu)
-{
-	struct sched_domain *sd = rcu_dereference_sched(cpu_rq(cpu)->sd);
-
-	if (!sd)
-		return NULL;
-
-	return sd->groups;
-}
-
 static unsigned long power_of(int cpu)
 {
-	struct sched_group *group = group_of(cpu);
-
-	if (!group)
-		return SCHED_LOAD_SCALE;
-
-	return group->cpu_power;
+	return cpu_rq(cpu)->cpu_power;
 }
 
 static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
@@ -1673,9 +1663,6 @@ static void update_shares(struct sched_domain *sd)
 
 static void update_h_load(long cpu)
 {
-	if (root_task_group_empty())
-		return;
-
 	walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
 }
 
@@ -1854,8 +1841,8 @@ static void dec_nr_running(struct rq *rq)
 static void set_load_weight(struct task_struct *p)
 {
 	if (task_has_rt_policy(p)) {
-		p->se.load.weight = prio_to_weight[0] * 2;
-		p->se.load.inv_weight = prio_to_wmult[0] >> 1;
+		p->se.load.weight = 0;
+		p->se.load.inv_weight = WMULT_CONST;
 		return;
 	}
 
@@ -2507,7 +2494,16 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	if (p->sched_class->task_fork)
 		p->sched_class->task_fork(p);
 
+	/*
+	 * The child is not yet in the pid-hash so no cgroup attach races,
+	 * and the cgroup is pinned to this child due to cgroup_fork()
+	 * is ran before sched_fork().
+	 *
+	 * Silence PROVE_RCU.
+	 */
+	rcu_read_lock();
 	set_task_cpu(p, cpu);
+	rcu_read_unlock();
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
@@ -2877,9 +2873,9 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
@@ -4478,16 +4474,6 @@ recheck:
 	}
 
 	if (user) {
-#ifdef CONFIG_RT_GROUP_SCHED
-		/*
-		 * Do not allow realtime tasks into groups that have no runtime
-		 * assigned.
-		 */
-		if (rt_bandwidth_enabled() && rt_policy(policy) &&
-				task_group(p)->rt_bandwidth.rt_runtime == 0)
-			return -EPERM;
-#endif
-
 		retval = security_task_setscheduler(p, policy, param);
 		if (retval)
 			return retval;
@@ -4503,6 +4489,22 @@ recheck:
 	 * runqueue lock must be held.
 	 */
 	rq = __task_rq_lock(p);
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	if (user) {
+		/*
+		 * Do not allow realtime tasks into groups that have no runtime
+		 * assigned.
+		 */
+		if (rt_bandwidth_enabled() && rt_policy(policy) &&
+				task_group(p)->rt_bandwidth.rt_runtime == 0) {
+			__task_rq_unlock(rq);
+			raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+			return -EPERM;
+		}
+	}
+#endif
+
 	/* recheck policy now with rq lock held */
 	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
 		policy = oldpolicy = -1;
@@ -7605,6 +7607,7 @@ void __init sched_init(void)
 #ifdef CONFIG_SMP
 		rq->sd = NULL;
 		rq->rd = NULL;
+		rq->cpu_power = SCHED_LOAD_SCALE;
 		rq->post_schedule = 0;
 		rq->active_balance = 0;
 		rq->next_balance = jiffies;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 217e4a9393e..a878b5332da 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1225,7 +1225,6 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 	unsigned long this_load, load;
 	int idx, this_cpu, prev_cpu;
 	unsigned long tl_per_task;
-	unsigned int imbalance;
 	struct task_group *tg;
 	unsigned long weight;
 	int balanced;
@@ -1241,6 +1240,7 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 	 * effect of the currently running task from the load
 	 * of the current CPU:
 	 */
+	rcu_read_lock();
 	if (sync) {
 		tg = task_group(current);
 		weight = current->se.load.weight;
@@ -1252,8 +1252,6 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 	tg = task_group(p);
 	weight = p->se.load.weight;
 
-	imbalance = 100 + (sd->imbalance_pct - 100) / 2;
-
 	/*
 	 * In low-load situations, where prev_cpu is idle and this_cpu is idle
 	 * due to the sync cause above having dropped this_load to 0, we'll
@@ -1263,9 +1261,22 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 	 * Otherwise check if either cpus are near enough in load to allow this
 	 * task to be woken on this_cpu.
 	 */
-	balanced = !this_load ||
-		100*(this_load + effective_load(tg, this_cpu, weight, weight)) <=
-		imbalance*(load + effective_load(tg, prev_cpu, 0, weight));
+	if (this_load) {
+		unsigned long this_eff_load, prev_eff_load;
+
+		this_eff_load = 100;
+		this_eff_load *= power_of(prev_cpu);
+		this_eff_load *= this_load +
+			effective_load(tg, this_cpu, weight, weight);
+
+		prev_eff_load = 100 + (sd->imbalance_pct - 100) / 2;
+		prev_eff_load *= power_of(this_cpu);
+		prev_eff_load *= load + effective_load(tg, prev_cpu, 0, weight);
+
+		balanced = this_eff_load <= prev_eff_load;
+	} else
+		balanced = true;
+	rcu_read_unlock();
 
 	/*
 	 * If the currently running task will sleep within
@@ -2298,6 +2309,7 @@ static void update_cpu_power(struct sched_domain *sd, int cpu)
 	if (!power)
 		power = 1;
 
+	cpu_rq(cpu)->cpu_power = power;
 	sdg->cpu_power = power;
 }
 
diff --git a/kernel/signal.c b/kernel/signal.c
index 906ae5a1779..bded6518778 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -637,7 +637,7 @@ static inline bool si_fromuser(const struct siginfo *info)
 
 /*
  * Bad permissions for sending the signal
- * - the caller must hold at least the RCU read lock
+ * - the caller must hold the RCU read lock
  */
 static int check_kill_permission(int sig, struct siginfo *info,
 				 struct task_struct *t)
@@ -1127,11 +1127,14 @@ struct sighand_struct *lock_task_sighand(struct task_struct *tsk, unsigned long
 
 /*
  * send signal info to all the members of a group
- * - the caller must hold the RCU read lock at least
  */
 int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
 {
-	int ret = check_kill_permission(sig, info, p);
+	int ret;
+
+	rcu_read_lock();
+	ret = check_kill_permission(sig, info, p);
+	rcu_read_unlock();
 
 	if (!ret && sig)
 		ret = do_send_sig_info(sig, info, p, true);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 825e1126008..07b4f1b1a73 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -850,7 +850,7 @@ static __init int spawn_ksoftirqd(void)
 	void *cpu = (void *)(long)smp_processor_id();
 	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
 
-	BUG_ON(err == NOTIFY_BAD);
+	BUG_ON(err != NOTIFY_OK);
 	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
 	register_cpu_notifier(&cpu_nfb);
 	return 0;
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index b4e7431e7c7..70f8d90331e 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -321,7 +321,7 @@ static int __cpuinit cpu_stop_cpu_callback(struct notifier_block *nfb,
 
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_UP_CANCELED:
-	case CPU_DEAD:
+	case CPU_POST_DEAD:
 	{
 		struct cpu_stop_work *work;
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 997080f00e0..d24f761f487 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1471,12 +1471,12 @@ static struct ctl_table fs_table[] = {
 	},
 #endif
 	{
-		.procname	= "pipe-max-pages",
-		.data		= &pipe_max_pages,
+		.procname	= "pipe-max-size",
+		.data		= &pipe_max_size,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.extra1		= &two,
+		.proc_handler	= &pipe_proc_fn,
+		.extra1		= &pipe_min_size,
 	},
 /*
  * NOTE: do not add new entries to this table unless you have read
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1d7b9bc1c03..813993b5fb6 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -154,14 +154,14 @@ static void tick_nohz_update_jiffies(ktime_t now)
  * Updates the per cpu time idle statistics counters
  */
 static void
-update_ts_time_stats(struct tick_sched *ts, ktime_t now, u64 *last_update_time)
+update_ts_time_stats(int cpu, struct tick_sched *ts, ktime_t now, u64 *last_update_time)
 {
 	ktime_t delta;
 
 	if (ts->idle_active) {
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
 		ts->idle_entrytime = now;
 	}
@@ -175,19 +175,19 @@ static void tick_nohz_stop_idle(int cpu, ktime_t now)
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
 
-	update_ts_time_stats(ts, now, NULL);
+	update_ts_time_stats(cpu, ts, now, NULL);
 	ts->idle_active = 0;
 
 	sched_clock_idle_wakeup_event(0);
 }
 
-static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
+static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts)
 {
 	ktime_t now;
 
 	now = ktime_get();
 
-	update_ts_time_stats(ts, now, NULL);
+	update_ts_time_stats(cpu, ts, now, NULL);
 
 	ts->idle_entrytime = now;
 	ts->idle_active = 1;
@@ -216,7 +216,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time)
 	if (!tick_nohz_enabled)
 		return -1;
 
-	update_ts_time_stats(ts, ktime_get(), last_update_time);
+	update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
 
 	return ktime_to_us(ts->idle_sleeptime);
 }
@@ -242,7 +242,7 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time)
 	if (!tick_nohz_enabled)
 		return -1;
 
-	update_ts_time_stats(ts, ktime_get(), last_update_time);
+	update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
 
 	return ktime_to_us(ts->iowait_sleeptime);
 }
@@ -284,7 +284,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	 */
 	ts->inidle = 1;
 
-	now = tick_nohz_start_idle(ts);
+	now = tick_nohz_start_idle(cpu, ts);
 
 	/*
 	 * If this cpu is offline and it is the one which updates
@@ -315,9 +315,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 		goto end;
 	}
 
-	if (nohz_ratelimit(cpu))
-		goto end;
-
 	ts->idle_calls++;
 	/* Read jiffies and the time when jiffies were updated last */
 	do {
@@ -328,7 +325,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	} while (read_seqretry(&xtime_lock, seq));
 
 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
-	    arch_needs_cpu(cpu)) {
+	    arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
 	} else {
diff --git a/kernel/timer.c b/kernel/timer.c
index 2454172a80d..efde11e197c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -577,6 +577,19 @@ static void __init_timer(struct timer_list *timer,
 	lockdep_init_map(&timer->lockdep_map, name, key, 0);
 }
 
+void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
+					 const char *name,
+					 struct lock_class_key *key,
+					 void (*function)(unsigned long),
+					 unsigned long data)
+{
+	timer->function = function;
+	timer->data = data;
+	init_timer_on_stack_key(timer, name, key);
+	timer_set_deferrable(timer);
+}
+EXPORT_SYMBOL_GPL(setup_deferrable_timer_on_stack_key);
+
 /**
  * init_timer_key - initialize a timer
  * @timer: the timer to be initialized
@@ -1717,7 +1730,7 @@ void __init init_timers(void)
 
 	init_timer_stats();
 
-	BUG_ON(err == NOTIFY_BAD);
+	BUG_ON(err != NOTIFY_OK);
 	register_cpu_notifier(&timers_nb);
 	open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
 }
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 36ea2b65dcd..638711c1750 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -842,6 +842,7 @@ static void blk_add_trace_split(void *ignore,
 
 /**
  * blk_add_trace_remap - Add a trace for a remap operation
+ * @ignore:	trace callback data parameter (not used)
  * @q:		queue the io is for
  * @bio:	the source bio
  * @dev:	target device
@@ -873,6 +874,7 @@ static void blk_add_trace_remap(void *ignore,
 
 /**
  * blk_add_trace_rq_remap - Add a trace for a request-remap operation
+ * @ignore:	trace callback data parameter (not used)
  * @q:		queue the io is for
  * @rq:		the source request
  * @dev:	target device
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index cb6f365016e..8a2b73f7c06 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -96,7 +96,9 @@ int perf_trace_init(struct perf_event *p_event)
 	mutex_lock(&event_mutex);
 	list_for_each_entry(tp_event, &ftrace_events, list) {
 		if (tp_event->event.type == event_id &&
-		    tp_event->class && tp_event->class->perf_probe &&
+		    tp_event->class &&
+		    (tp_event->class->perf_probe ||
+		     tp_event->class->reg) &&
 		    try_module_get(tp_event->mod)) {
 			ret = perf_trace_event_init(tp_event, p_event);
 			break;
@@ -116,7 +118,7 @@ int perf_trace_enable(struct perf_event *p_event)
 	if (WARN_ON_ONCE(!list))
 		return -EINVAL;
 
-	list = per_cpu_ptr(list, smp_processor_id());
+	list = this_cpu_ptr(list);
 	hlist_add_head_rcu(&p_event->hlist_entry, list);
 
 	return 0;
@@ -132,8 +134,9 @@ void perf_trace_destroy(struct perf_event *p_event)
 	struct ftrace_event_call *tp_event = p_event->tp_event;
 	int i;
 
+	mutex_lock(&event_mutex);
 	if (--tp_event->perf_refcount > 0)
-		return;
+		goto out;
 
 	if (tp_event->class->reg)
 		tp_event->class->reg(tp_event, TRACE_REG_PERF_UNREGISTER);
@@ -142,6 +145,12 @@ void perf_trace_destroy(struct perf_event *p_event)
 					    tp_event->class->perf_probe,
 					    tp_event);
 
+	/*
+	 * Ensure our callback won't be called anymore. See
+	 * tracepoint_probe_unregister() and __DO_TRACE().
+	 */
+	synchronize_sched();
+
 	free_percpu(tp_event->perf_events);
 	tp_event->perf_events = NULL;
 
@@ -151,6 +160,8 @@ void perf_trace_destroy(struct perf_event *p_event)
 			perf_trace_buf[i] = NULL;
 		}
 	}
+out:
+	mutex_unlock(&event_mutex);
 }
 
 __kprobes void *perf_trace_buf_prepare(int size, unsigned short type,
@@ -169,7 +180,7 @@ __kprobes void *perf_trace_buf_prepare(int size, unsigned short type,
 	if (*rctxp < 0)
 		return NULL;
 
-	raw_data = per_cpu_ptr(perf_trace_buf[*rctxp], smp_processor_id());
+	raw_data = this_cpu_ptr(perf_trace_buf[*rctxp]);
 
 	/* zero the dead bytes from align to not leak stack to user */
 	memset(&raw_data[size - sizeof(u64)], 0, sizeof(u64));
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index faf7cefd15d..f52b5f50299 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1359,7 +1359,7 @@ static __kprobes void kprobe_perf_func(struct kprobe *kp,
 	for (i = 0; i < tp->nr_args; i++)
 		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
 
-	head = per_cpu_ptr(call->perf_events, smp_processor_id());
+	head = this_cpu_ptr(call->perf_events);
 	perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head);
 }
 
@@ -1392,7 +1392,7 @@ static __kprobes void kretprobe_perf_func(struct kretprobe_instance *ri,
 	for (i = 0; i < tp->nr_args; i++)
 		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
 
-	head = per_cpu_ptr(call->perf_events, smp_processor_id());
+	head = this_cpu_ptr(call->perf_events);
 	perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1, regs, head);
 }
 
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index d2c859cec9e..34e35804304 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -519,7 +519,7 @@ static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id)
 	syscall_get_arguments(current, regs, 0, sys_data->nb_args,
 			       (unsigned long *)&rec->args);
 
-	head = per_cpu_ptr(sys_data->enter_event->perf_events, smp_processor_id());
+	head = this_cpu_ptr(sys_data->enter_event->perf_events);
 	perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
 }
 
@@ -595,7 +595,7 @@ static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
 	rec->nr = syscall_nr;
 	rec->ret = syscall_get_return_value(current, regs);
 
-	head = per_cpu_ptr(sys_data->exit_event->perf_events, smp_processor_id());
+	head = this_cpu_ptr(sys_data->exit_event->perf_events);
 	perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
 }
 
diff --git a/lib/Kconfig b/lib/Kconfig
index 170d8ca901d..5b916bc0fba 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -181,9 +181,6 @@ config HAS_DMA
 config CHECK_SIGNATURE
 	bool
 
-config HAVE_LMB
-	boolean
-
 config CPUMASK_OFFSTACK
 	bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
 	help
diff --git a/lib/Makefile b/lib/Makefile
index 3f1062cbbff..0bfabba1bb3 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -89,8 +89,6 @@ obj-$(CONFIG_CPU_NOTIFIER_ERROR_INJECT) += cpu-notifier-error-inject.o
 
 lib-$(CONFIG_GENERIC_BUG) += bug.o
 
-obj-$(CONFIG_HAVE_LMB) += lmb.o
-
 obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
 
 obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index 9087d71537d..44524cc8c32 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -113,7 +113,8 @@ static __init int test_atomic64(void)
 	r += one;
 	BUG_ON(v.counter != r);
 
-#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(_ASM_GENERIC_ATOMIC64_H)
+#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+    defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H) || defined(CONFIG_ARM)
 	INIT(onestwos);
 	BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1));
 	r -= one;
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 3df8eb17a60..02afc253372 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -692,7 +692,7 @@ static void ddebug_table_free(struct ddebug_table *dt)
  * Called in response to a module being unloaded.  Removes
  * any ddebug_table's which point at the module.
  */
-int ddebug_remove_module(char *mod_name)
+int ddebug_remove_module(const char *mod_name)
 {
 	struct ddebug_table *dt, *nextdt;
 	int ret = -ENOENT;
diff --git a/lib/genalloc.c b/lib/genalloc.c
index 736c3b06398..1923f1490e7 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -128,7 +128,6 @@ unsigned long gen_pool_alloc(struct gen_pool *pool, size_t size)
 		chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
 
 		end_bit = (chunk->end_addr - chunk->start_addr) >> order;
-		end_bit -= nbits + 1;
 
 		spin_lock_irqsave(&chunk->lock, flags);
 		start_bit = bitmap_find_next_zero_area(chunk->bits, end_bit, 0,
diff --git a/lib/idr.c b/lib/idr.c
index c1a20690176..7f1a4f0acf5 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -602,7 +602,7 @@ void *idr_get_next(struct idr *idp, int *nextidp)
 	/* find first ent */
 	n = idp->layers * IDR_BITS;
 	max = 1 << n;
-	p = rcu_dereference(idp->top);
+	p = rcu_dereference_raw(idp->top);
 	if (!p)
 		return NULL;
 
@@ -610,7 +610,7 @@ void *idr_get_next(struct idr *idp, int *nextidp)
 		while (n > 0 && p) {
 			n -= IDR_BITS;
 			*paa++ = p;
-			p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
+			p = rcu_dereference_raw(p->ary[(id >> n) & IDR_MASK]);
 		}
 
 		if (p) {
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 59c15511d58..b93579504df 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -83,6 +83,7 @@ out:
 	return ret;
 }
 
+#ifdef CONFIG_NET
 static int kobj_bcast_filter(struct sock *dsk, struct sk_buff *skb, void *data)
 {
 	struct kobject *kobj = data;
@@ -98,6 +99,7 @@ static int kobj_bcast_filter(struct sock *dsk, struct sk_buff *skb, void *data)
 
 	return 0;
 }
+#endif
 
 static int kobj_usermode_filter(struct kobject *kobj)
 {
@@ -378,6 +380,7 @@ static int uevent_net_init(struct net *net)
 	if (!ue_sk->sk) {
 		printk(KERN_ERR
 		       "kobject_uevent: unable to create netlink socket!\n");
+		kfree(ue_sk);
 		return -ENODEV;
 	}
 	mutex_lock(&uevent_sock_mutex);
diff --git a/lib/lmb.c b/lib/lmb.c
deleted file mode 100644
index b1fc5260652..00000000000
--- a/lib/lmb.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp.	June 2001.
- * Copyright (C) 2001 Peter Bergner.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/lmb.h>
-
-#define LMB_ALLOC_ANYWHERE	0
-
-struct lmb lmb;
-
-static int lmb_debug;
-
-static int __init early_lmb(char *p)
-{
-	if (p && strstr(p, "debug"))
-		lmb_debug = 1;
-	return 0;
-}
-early_param("lmb", early_lmb);
-
-static void lmb_dump(struct lmb_region *region, char *name)
-{
-	unsigned long long base, size;
-	int i;
-
-	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
-
-	for (i = 0; i < region->cnt; i++) {
-		base = region->region[i].base;
-		size = region->region[i].size;
-
-		pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
-		    name, i, base, base + size - 1, size);
-	}
-}
-
-void lmb_dump_all(void)
-{
-	if (!lmb_debug)
-		return;
-
-	pr_info("LMB configuration:\n");
-	pr_info(" rmo_size    = 0x%llx\n", (unsigned long long)lmb.rmo_size);
-	pr_info(" memory.size = 0x%llx\n", (unsigned long long)lmb.memory.size);
-
-	lmb_dump(&lmb.memory, "memory");
-	lmb_dump(&lmb.reserved, "reserved");
-}
-
-static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,
-					u64 size2)
-{
-	return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
-}
-
-static long lmb_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
-{
-	if (base2 == base1 + size1)
-		return 1;
-	else if (base1 == base2 + size2)
-		return -1;
-
-	return 0;
-}
-
-static long lmb_regions_adjacent(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	u64 base1 = rgn->region[r1].base;
-	u64 size1 = rgn->region[r1].size;
-	u64 base2 = rgn->region[r2].base;
-	u64 size2 = rgn->region[r2].size;
-
-	return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
-	unsigned long i;
-
-	for (i = r; i < rgn->cnt - 1; i++) {
-		rgn->region[i].base = rgn->region[i + 1].base;
-		rgn->region[i].size = rgn->region[i + 1].size;
-	}
-	rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void lmb_coalesce_regions(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	rgn->region[r1].size += rgn->region[r2].size;
-	lmb_remove_region(rgn, r2);
-}
-
-void __init lmb_init(void)
-{
-	/* Create a dummy zero size LMB which will get coalesced away later.
-	 * This simplifies the lmb_add() code below...
-	 */
-	lmb.memory.region[0].base = 0;
-	lmb.memory.region[0].size = 0;
-	lmb.memory.cnt = 1;
-
-	/* Ditto. */
-	lmb.reserved.region[0].base = 0;
-	lmb.reserved.region[0].size = 0;
-	lmb.reserved.cnt = 1;
-}
-
-void __init lmb_analyze(void)
-{
-	int i;
-
-	lmb.memory.size = 0;
-
-	for (i = 0; i < lmb.memory.cnt; i++)
-		lmb.memory.size += lmb.memory.region[i].size;
-}
-
-static long lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
-{
-	unsigned long coalesced = 0;
-	long adjacent, i;
-
-	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
-		rgn->region[0].base = base;
-		rgn->region[0].size = size;
-		return 0;
-	}
-
-	/* First try and coalesce this LMB with another. */
-	for (i = 0; i < rgn->cnt; i++) {
-		u64 rgnbase = rgn->region[i].base;
-		u64 rgnsize = rgn->region[i].size;
-
-		if ((rgnbase == base) && (rgnsize == size))
-			/* Already have this region, so we're done */
-			return 0;
-
-		adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
-		if (adjacent > 0) {
-			rgn->region[i].base -= size;
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		} else if (adjacent < 0) {
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		}
-	}
-
-	if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
-		lmb_coalesce_regions(rgn, i, i+1);
-		coalesced++;
-	}
-
-	if (coalesced)
-		return coalesced;
-	if (rgn->cnt >= MAX_LMB_REGIONS)
-		return -1;
-
-	/* Couldn't coalesce the LMB, so add it to the sorted table. */
-	for (i = rgn->cnt - 1; i >= 0; i--) {
-		if (base < rgn->region[i].base) {
-			rgn->region[i+1].base = rgn->region[i].base;
-			rgn->region[i+1].size = rgn->region[i].size;
-		} else {
-			rgn->region[i+1].base = base;
-			rgn->region[i+1].size = size;
-			break;
-		}
-	}
-
-	if (base < rgn->region[0].base) {
-		rgn->region[0].base = base;
-		rgn->region[0].size = size;
-	}
-	rgn->cnt++;
-
-	return 0;
-}
-
-long lmb_add(u64 base, u64 size)
-{
-	struct lmb_region *_rgn = &lmb.memory;
-
-	/* On pSeries LPAR systems, the first LMB is our RMO region. */
-	if (base == 0)
-		lmb.rmo_size = size;
-
-	return lmb_add_region(_rgn, base, size);
-
-}
-
-static long __lmb_remove(struct lmb_region *rgn, u64 base, u64 size)
-{
-	u64 rgnbegin, rgnend;
-	u64 end = base + size;
-	int i;
-
-	rgnbegin = rgnend = 0; /* supress gcc warnings */
-
-	/* Find the region where (base, size) belongs to */
-	for (i=0; i < rgn->cnt; i++) {
-		rgnbegin = rgn->region[i].base;
-		rgnend = rgnbegin + rgn->region[i].size;
-
-		if ((rgnbegin <= base) && (end <= rgnend))
-			break;
-	}
-
-	/* Didn't find the region */
-	if (i == rgn->cnt)
-		return -1;
-
-	/* Check to see if we are removing entire region */
-	if ((rgnbegin == base) && (rgnend == end)) {
-		lmb_remove_region(rgn, i);
-		return 0;
-	}
-
-	/* Check to see if region is matching at the front */
-	if (rgnbegin == base) {
-		rgn->region[i].base = end;
-		rgn->region[i].size -= size;
-		return 0;
-	}
-
-	/* Check to see if the region is matching at the end */
-	if (rgnend == end) {
-		rgn->region[i].size -= size;
-		return 0;
-	}
-
-	/*
-	 * We need to split the entry -  adjust the current one to the
-	 * beginging of the hole and add the region after hole.
-	 */
-	rgn->region[i].size = base - rgn->region[i].base;
-	return lmb_add_region(rgn, end, rgnend - end);
-}
-
-long lmb_remove(u64 base, u64 size)
-{
-	return __lmb_remove(&lmb.memory, base, size);
-}
-
-long __init lmb_free(u64 base, u64 size)
-{
-	return __lmb_remove(&lmb.reserved, base, size);
-}
-
-long __init lmb_reserve(u64 base, u64 size)
-{
-	struct lmb_region *_rgn = &lmb.reserved;
-
-	BUG_ON(0 == size);
-
-	return lmb_add_region(_rgn, base, size);
-}
-
-long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
-{
-	unsigned long i;
-
-	for (i = 0; i < rgn->cnt; i++) {
-		u64 rgnbase = rgn->region[i].base;
-		u64 rgnsize = rgn->region[i].size;
-		if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
-			break;
-	}
-
-	return (i < rgn->cnt) ? i : -1;
-}
-
-static u64 lmb_align_down(u64 addr, u64 size)
-{
-	return addr & ~(size - 1);
-}
-
-static u64 lmb_align_up(u64 addr, u64 size)
-{
-	return (addr + (size - 1)) & ~(size - 1);
-}
-
-static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
-					   u64 size, u64 align)
-{
-	u64 base, res_base;
-	long j;
-
-	base = lmb_align_down((end - size), align);
-	while (start <= base) {
-		j = lmb_overlaps_region(&lmb.reserved, base, size);
-		if (j < 0) {
-			/* this area isn't reserved, take it */
-			if (lmb_add_region(&lmb.reserved, base, size) < 0)
-				base = ~(u64)0;
-			return base;
-		}
-		res_base = lmb.reserved.region[j].base;
-		if (res_base < size)
-			break;
-		base = lmb_align_down(res_base - size, align);
-	}
-
-	return ~(u64)0;
-}
-
-static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
-				       u64 (*nid_range)(u64, u64, int *),
-				       u64 size, u64 align, int nid)
-{
-	u64 start, end;
-
-	start = mp->base;
-	end = start + mp->size;
-
-	start = lmb_align_up(start, align);
-	while (start < end) {
-		u64 this_end;
-		int this_nid;
-
-		this_end = nid_range(start, end, &this_nid);
-		if (this_nid == nid) {
-			u64 ret = lmb_alloc_nid_unreserved(start, this_end,
-							   size, align);
-			if (ret != ~(u64)0)
-				return ret;
-		}
-		start = this_end;
-	}
-
-	return ~(u64)0;
-}
-
-u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
-			 u64 (*nid_range)(u64 start, u64 end, int *nid))
-{
-	struct lmb_region *mem = &lmb.memory;
-	int i;
-
-	BUG_ON(0 == size);
-
-	size = lmb_align_up(size, align);
-
-	for (i = 0; i < mem->cnt; i++) {
-		u64 ret = lmb_alloc_nid_region(&mem->region[i],
-					       nid_range,
-					       size, align, nid);
-		if (ret != ~(u64)0)
-			return ret;
-	}
-
-	return lmb_alloc(size, align);
-}
-
-u64 __init lmb_alloc(u64 size, u64 align)
-{
-	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
-	u64 alloc;
-
-	alloc = __lmb_alloc_base(size, align, max_addr);
-
-	if (alloc == 0)
-		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
-		      (unsigned long long) size, (unsigned long long) max_addr);
-
-	return alloc;
-}
-
-u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
-	long i, j;
-	u64 base = 0;
-	u64 res_base;
-
-	BUG_ON(0 == size);
-
-	size = lmb_align_up(size, align);
-
-	/* On some platforms, make sure we allocate lowmem */
-	/* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
-	if (max_addr == LMB_ALLOC_ANYWHERE)
-		max_addr = LMB_REAL_LIMIT;
-
-	for (i = lmb.memory.cnt - 1; i >= 0; i--) {
-		u64 lmbbase = lmb.memory.region[i].base;
-		u64 lmbsize = lmb.memory.region[i].size;
-
-		if (lmbsize < size)
-			continue;
-		if (max_addr == LMB_ALLOC_ANYWHERE)
-			base = lmb_align_down(lmbbase + lmbsize - size, align);
-		else if (lmbbase < max_addr) {
-			base = min(lmbbase + lmbsize, max_addr);
-			base = lmb_align_down(base - size, align);
-		} else
-			continue;
-
-		while (base && lmbbase <= base) {
-			j = lmb_overlaps_region(&lmb.reserved, base, size);
-			if (j < 0) {
-				/* this area isn't reserved, take it */
-				if (lmb_add_region(&lmb.reserved, base, size) < 0)
-					return 0;
-				return base;
-			}
-			res_base = lmb.reserved.region[j].base;
-			if (res_base < size)
-				break;
-			base = lmb_align_down(res_base - size, align);
-		}
-	}
-	return 0;
-}
-
-/* You must call lmb_analyze() before this. */
-u64 __init lmb_phys_mem_size(void)
-{
-	return lmb.memory.size;
-}
-
-u64 lmb_end_of_DRAM(void)
-{
-	int idx = lmb.memory.cnt - 1;
-
-	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(u64 memory_limit)
-{
-	unsigned long i;
-	u64 limit;
-	struct lmb_property *p;
-
-	if (!memory_limit)
-		return;
-
-	/* Truncate the lmb regions to satisfy the memory limit. */
-	limit = memory_limit;
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		if (limit > lmb.memory.region[i].size) {
-			limit -= lmb.memory.region[i].size;
-			continue;
-		}
-
-		lmb.memory.region[i].size = limit;
-		lmb.memory.cnt = i + 1;
-		break;
-	}
-
-	if (lmb.memory.region[0].size < lmb.rmo_size)
-		lmb.rmo_size = lmb.memory.region[0].size;
-
-	memory_limit = lmb_end_of_DRAM();
-
-	/* And truncate any reserves above the limit also. */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		p = &lmb.reserved.region[i];
-
-		if (p->base > memory_limit)
-			p->size = 0;
-		else if ((p->base + p->size) > memory_limit)
-			p->size = memory_limit - p->base;
-
-		if (p->size == 0) {
-			lmb_remove_region(&lmb.reserved, i);
-			i--;
-		}
-	}
-}
-
-int __init lmb_is_reserved(u64 addr)
-{
-	int i;
-
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		u64 upper = lmb.reserved.region[i].base +
-			lmb.reserved.region[i].size - 1;
-		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
-			return 1;
-	}
-	return 0;
-}
-
-int lmb_is_region_reserved(u64 base, u64 size)
-{
-	return lmb_overlaps_region(&lmb.reserved, base, size);
-}
-
-/*
- * Given a <base, len>, find which memory regions belong to this range.
- * Adjust the request and return a contiguous chunk.
- */
-int lmb_find(struct lmb_property *res)
-{
-	int i;
-	u64 rstart, rend;
-
-	rstart = res->base;
-	rend = rstart + res->size - 1;
-
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		u64 start = lmb.memory.region[i].base;
-		u64 end = start + lmb.memory.region[i].size - 1;
-
-		if (start > rend)
-			return -1;
-
-		if ((end >= rstart) && (start < rend)) {
-			/* adjust the request */
-			if (rstart < start)
-				rstart = start;
-			if (rend > end)
-				rend = end;
-			res->base = rstart;
-			res->size = rend - rstart + 1;
-			return 0;
-		}
-	}
-	return -1;
-}
diff --git a/lib/rbtree.c b/lib/rbtree.c
index 15e10b1afdd..4693f79195d 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -44,11 +44,6 @@ static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
 	else
 		root->rb_node = right;
 	rb_set_parent(node, right);
-
-	if (root->augment_cb) {
-		root->augment_cb(node);
-		root->augment_cb(right);
-	}
 }
 
 static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
@@ -72,20 +67,12 @@ static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
 	else
 		root->rb_node = left;
 	rb_set_parent(node, left);
-
-	if (root->augment_cb) {
-		root->augment_cb(node);
-		root->augment_cb(left);
-	}
 }
 
 void rb_insert_color(struct rb_node *node, struct rb_root *root)
 {
 	struct rb_node *parent, *gparent;
 
-	if (root->augment_cb)
-		root->augment_cb(node);
-
 	while ((parent = rb_parent(node)) && rb_is_red(parent))
 	{
 		gparent = rb_parent(parent);
@@ -240,15 +227,12 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 	else
 	{
 		struct rb_node *old = node, *left;
-		int old_parent_cb = 0;
-		int successor_parent_cb = 0;
 
 		node = node->rb_right;
 		while ((left = node->rb_left) != NULL)
 			node = left;
 
 		if (rb_parent(old)) {
-			old_parent_cb = 1;
 			if (rb_parent(old)->rb_left == old)
 				rb_parent(old)->rb_left = node;
 			else
@@ -263,10 +247,8 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 		if (parent == old) {
 			parent = node;
 		} else {
-			successor_parent_cb = 1;
 			if (child)
 				rb_set_parent(child, parent);
-
 			parent->rb_left = child;
 
 			node->rb_right = old->rb_right;
@@ -277,24 +259,6 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 		node->rb_left = old->rb_left;
 		rb_set_parent(old->rb_left, node);
 
-		if (root->augment_cb) {
-			/*
-			 * Here, three different nodes can have new children.
-			 * The parent of the successor node that was selected
-			 * to replace the node to be erased.
-			 * The node that is getting erased and is now replaced
-			 * by its successor.
-			 * The parent of the node getting erased-replaced.
-			 */
-			if (successor_parent_cb)
-				root->augment_cb(parent);
-
-			root->augment_cb(node);
-
-			if (old_parent_cb)
-				root->augment_cb(rb_parent(old));
-		}
-
 		goto color;
 	}
 
@@ -303,19 +267,15 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 
 	if (child)
 		rb_set_parent(child, parent);
-
-	if (parent) {
+	if (parent)
+	{
 		if (parent->rb_left == node)
 			parent->rb_left = child;
 		else
 			parent->rb_right = child;
-
-		if (root->augment_cb)
-			root->augment_cb(parent);
-
-	} else {
-		root->rb_node = child;
 	}
+	else
+		root->rb_node = child;
 
  color:
 	if (color == RB_BLACK)
@@ -323,6 +283,74 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 }
 EXPORT_SYMBOL(rb_erase);
 
+static void rb_augment_path(struct rb_node *node, rb_augment_f func, void *data)
+{
+	struct rb_node *parent;
+
+up:
+	func(node, data);
+	parent = rb_parent(node);
+	if (!parent)
+		return;
+
+	if (node == parent->rb_left && parent->rb_right)
+		func(parent->rb_right, data);
+	else if (parent->rb_left)
+		func(parent->rb_left, data);
+
+	node = parent;
+	goto up;
+}
+
+/*
+ * after inserting @node into the tree, update the tree to account for
+ * both the new entry and any damage done by rebalance
+ */
+void rb_augment_insert(struct rb_node *node, rb_augment_f func, void *data)
+{
+	if (node->rb_left)
+		node = node->rb_left;
+	else if (node->rb_right)
+		node = node->rb_right;
+
+	rb_augment_path(node, func, data);
+}
+
+/*
+ * before removing the node, find the deepest node on the rebalance path
+ * that will still be there after @node gets removed
+ */
+struct rb_node *rb_augment_erase_begin(struct rb_node *node)
+{
+	struct rb_node *deepest;
+
+	if (!node->rb_right && !node->rb_left)
+		deepest = rb_parent(node);
+	else if (!node->rb_right)
+		deepest = node->rb_left;
+	else if (!node->rb_left)
+		deepest = node->rb_right;
+	else {
+		deepest = rb_next(node);
+		if (deepest->rb_right)
+			deepest = deepest->rb_right;
+		else if (rb_parent(deepest) != node)
+			deepest = rb_parent(deepest);
+	}
+
+	return deepest;
+}
+
+/*
+ * after removal, update the tree to account for the removed entry
+ * and any rebalance damage.
+ */
+void rb_augment_erase_end(struct rb_node *node, rb_augment_f func, void *data)
+{
+	if (node)
+		rb_augment_path(node, func, data);
+}
+
 /*
  * This function returns the first node (in sort order) of the tree.
  */
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index a009055140e..34e3082632d 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -50,19 +50,11 @@
  */
 #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
 
-/*
- * Enumeration for sync targets
- */
-enum dma_sync_target {
-	SYNC_FOR_CPU = 0,
-	SYNC_FOR_DEVICE = 1,
-};
-
 int swiotlb_force;
 
 /*
- * Used to do a quick range check in unmap_single and
- * sync_single_*, to see if the memory was in fact allocated by this
+ * Used to do a quick range check in swiotlb_tbl_unmap_single and
+ * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
  * API.
  */
 static char *io_tlb_start, *io_tlb_end;
@@ -140,28 +132,14 @@ void swiotlb_print_info(void)
 	       (unsigned long long)pend);
 }
 
-/*
- * Statically reserve bounce buffer space and initialize bounce buffer data
- * structures for the software IO TLB used to implement the DMA API.
- */
-void __init
-swiotlb_init_with_default_size(size_t default_size, int verbose)
+void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 {
 	unsigned long i, bytes;
 
-	if (!io_tlb_nslabs) {
-		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
-		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
-	}
-
-	bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+	bytes = nslabs << IO_TLB_SHIFT;
 
-	/*
-	 * Get IO TLB memory from the low pages
-	 */
-	io_tlb_start = alloc_bootmem_low_pages(bytes);
-	if (!io_tlb_start)
-		panic("Cannot allocate SWIOTLB buffer");
+	io_tlb_nslabs = nslabs;
+	io_tlb_start = tlb;
 	io_tlb_end = io_tlb_start + bytes;
 
 	/*
@@ -185,6 +163,32 @@ swiotlb_init_with_default_size(size_t default_size, int verbose)
 		swiotlb_print_info();
 }
 
+/*
+ * Statically reserve bounce buffer space and initialize bounce buffer data
+ * structures for the software IO TLB used to implement the DMA API.
+ */
+void __init
+swiotlb_init_with_default_size(size_t default_size, int verbose)
+{
+	unsigned long bytes;
+
+	if (!io_tlb_nslabs) {
+		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+	}
+
+	bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+
+	/*
+	 * Get IO TLB memory from the low pages
+	 */
+	io_tlb_start = alloc_bootmem_low_pages(bytes);
+	if (!io_tlb_start)
+		panic("Cannot allocate SWIOTLB buffer");
+
+	swiotlb_init_with_tbl(io_tlb_start, io_tlb_nslabs, verbose);
+}
+
 void __init
 swiotlb_init(int verbose)
 {
@@ -323,8 +327,8 @@ static int is_swiotlb_buffer(phys_addr_t paddr)
 /*
  * Bounce: copy the swiotlb buffer back to the original dma location
  */
-static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
-			   enum dma_data_direction dir)
+void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
+		    enum dma_data_direction dir)
 {
 	unsigned long pfn = PFN_DOWN(phys);
 
@@ -360,26 +364,25 @@ static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
 			memcpy(phys_to_virt(phys), dma_addr, size);
 	}
 }
+EXPORT_SYMBOL_GPL(swiotlb_bounce);
 
-/*
- * Allocates bounce buffer and returns its kernel virtual address.
- */
-static void *
-map_single(struct device *hwdev, phys_addr_t phys, size_t size, int dir)
+void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr,
+			     phys_addr_t phys, size_t size,
+			     enum dma_data_direction dir)
 {
 	unsigned long flags;
 	char *dma_addr;
 	unsigned int nslots, stride, index, wrap;
 	int i;
-	unsigned long start_dma_addr;
 	unsigned long mask;
 	unsigned long offset_slots;
 	unsigned long max_slots;
 
 	mask = dma_get_seg_boundary(hwdev);
-	start_dma_addr = swiotlb_virt_to_bus(hwdev, io_tlb_start) & mask;
 
-	offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
+	tbl_dma_addr &= mask;
+
+	offset_slots = ALIGN(tbl_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
 
 	/*
  	 * Carefully handle integer overflow which can occur when mask == ~0UL.
@@ -466,12 +469,27 @@ found:
 
 	return dma_addr;
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_map_single);
+
+/*
+ * Allocates bounce buffer and returns its kernel virtual address.
+ */
+
+static void *
+map_single(struct device *hwdev, phys_addr_t phys, size_t size,
+	   enum dma_data_direction dir)
+{
+	dma_addr_t start_dma_addr = swiotlb_virt_to_bus(hwdev, io_tlb_start);
+
+	return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size, dir);
+}
 
 /*
  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
  */
-static void
-do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
+void
+swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr, size_t size,
+			enum dma_data_direction dir)
 {
 	unsigned long flags;
 	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
@@ -509,10 +527,12 @@ do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
 	}
 	spin_unlock_irqrestore(&io_tlb_lock, flags);
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_unmap_single);
 
-static void
-sync_single(struct device *hwdev, char *dma_addr, size_t size,
-	    int dir, int target)
+void
+swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr, size_t size,
+			enum dma_data_direction dir,
+			enum dma_sync_target target)
 {
 	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
 	phys_addr_t phys = io_tlb_orig_addr[index];
@@ -536,6 +556,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size,
 		BUG();
 	}
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_sync_single);
 
 void *
 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -559,8 +580,8 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	}
 	if (!ret) {
 		/*
-		 * We are either out of memory or the device can't DMA
-		 * to GFP_DMA memory; fall back on map_single(), which
+		 * We are either out of memory or the device can't DMA to
+		 * GFP_DMA memory; fall back on map_single(), which
 		 * will grab memory from the lowest available address range.
 		 */
 		ret = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
@@ -578,7 +599,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		       (unsigned long long)dev_addr);
 
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		do_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
+		swiotlb_tbl_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
 		return NULL;
 	}
 	*dma_handle = dev_addr;
@@ -596,13 +617,14 @@ swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	if (!is_swiotlb_buffer(paddr))
 		free_pages((unsigned long)vaddr, get_order(size));
 	else
-		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
+		/* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
+		swiotlb_tbl_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL(swiotlb_free_coherent);
 
 static void
-swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
+swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
+	     int do_panic)
 {
 	/*
 	 * Ran out of IOMMU space for this operation. This is very bad.
@@ -680,14 +702,14 @@ EXPORT_SYMBOL_GPL(swiotlb_map_page);
  * whatever the device wrote there.
  */
 static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
-			 size_t size, int dir)
+			 size_t size, enum dma_data_direction dir)
 {
 	phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
 	if (is_swiotlb_buffer(paddr)) {
-		do_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
+		swiotlb_tbl_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
 		return;
 	}
 
@@ -723,14 +745,16 @@ EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
  */
 static void
 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
-		    size_t size, int dir, int target)
+		    size_t size, enum dma_data_direction dir,
+		    enum dma_sync_target target)
 {
 	phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
 	if (is_swiotlb_buffer(paddr)) {
-		sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
+		swiotlb_tbl_sync_single(hwdev, phys_to_virt(paddr), size, dir,
+				       target);
 		return;
 	}
 
@@ -809,7 +833,7 @@ EXPORT_SYMBOL(swiotlb_map_sg_attrs);
 
 int
 swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-	       int dir)
+	       enum dma_data_direction dir)
 {
 	return swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, NULL);
 }
@@ -836,7 +860,7 @@ EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
 
 void
 swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-		 int dir)
+		 enum dma_data_direction dir)
 {
 	return swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, NULL);
 }
@@ -851,7 +875,8 @@ EXPORT_SYMBOL(swiotlb_unmap_sg);
  */
 static void
 swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
-		int nelems, int dir, int target)
+		int nelems, enum dma_data_direction dir,
+		enum dma_sync_target target)
 {
 	struct scatterlist *sg;
 	int i;
diff --git a/mm/Kconfig b/mm/Kconfig
index 527136b2238..f4e516e9c37 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -128,6 +128,9 @@ config SPARSEMEM_VMEMMAP
 	 pfn_to_page and page_to_pfn operations.  This is the most
 	 efficient option when sufficient kernel resources are available.
 
+config HAVE_MEMBLOCK
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/Makefile b/mm/Makefile
index 8982504bd03..34b2546a9e3 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -15,6 +15,8 @@ obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   $(mmu-y)
 obj-y += init-mm.o
 
+obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
+
 obj-$(CONFIG_BOUNCE)	+= bounce.o
 obj-$(CONFIG_SWAP)	+= page_io.o swap_state.o swapfile.o thrash.o
 obj-$(CONFIG_HAS_DMA)	+= dmapool.o
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 660a87a2251..123bcef13e5 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -104,15 +104,13 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
 		   "b_more_io:        %8lu\n"
 		   "bdi_list:         %8u\n"
 		   "state:            %8lx\n"
-		   "wb_mask:          %8lx\n"
-		   "wb_list:          %8u\n"
-		   "wb_cnt:           %8u\n",
+		   "wb_list:          %8u\n",
 		   (unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
 		   (unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
 		   K(bdi_thresh), K(dirty_thresh),
 		   K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
-		   !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
-		   !list_empty(&bdi->wb_list), bdi->wb_cnt);
+		   !list_empty(&bdi->bdi_list), bdi->state,
+		   !list_empty(&bdi->wb_list));
 #undef K
 
 	return 0;
@@ -340,14 +338,13 @@ int bdi_has_dirty_io(struct backing_dev_info *bdi)
 static void bdi_flush_io(struct backing_dev_info *bdi)
 {
 	struct writeback_control wbc = {
-		.bdi			= bdi,
 		.sync_mode		= WB_SYNC_NONE,
 		.older_than_this	= NULL,
 		.range_cyclic		= 1,
 		.nr_to_write		= 1024,
 	};
 
-	writeback_inodes_wbc(&wbc);
+	writeback_inodes_wb(&bdi->wb, &wbc);
 }
 
 /*
@@ -675,12 +672,6 @@ int bdi_init(struct backing_dev_info *bdi)
 
 	bdi_wb_init(&bdi->wb, bdi);
 
-	/*
-	 * Just one thread support for now, hard code mask and count
-	 */
-	bdi->wb_mask = 1;
-	bdi->wb_cnt = 1;
-
 	for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
 		err = percpu_counter_init(&bdi->bdi_stat[i], 0);
 		if (err)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 58c66cc5056..142c84a5499 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -833,15 +833,24 @@ static void * __init ___alloc_bootmem_node(bootmem_data_t *bdata,
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+					 goal, -1ULL);
+	if (ptr)
+		return ptr;
+
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 					 goal, -1ULL);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
 #endif
+
+	return ptr;
 }
 
 void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+				goal, ARCH_LOW_ADDRESS_LIMIT);
+	if (ptr)
+		return ptr;
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align,
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #endif
+	return ptr;
 }
diff --git a/mm/memblock.c b/mm/memblock.c
new file mode 100644
index 00000000000..3024eb30fc2
--- /dev/null
+++ b/mm/memblock.c
@@ -0,0 +1,541 @@
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp.	June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/memblock.h>
+
+#define MEMBLOCK_ALLOC_ANYWHERE	0
+
+struct memblock memblock;
+
+static int memblock_debug;
+
+static int __init early_memblock(char *p)
+{
+	if (p && strstr(p, "debug"))
+		memblock_debug = 1;
+	return 0;
+}
+early_param("memblock", early_memblock);
+
+static void memblock_dump(struct memblock_region *region, char *name)
+{
+	unsigned long long base, size;
+	int i;
+
+	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
+
+	for (i = 0; i < region->cnt; i++) {
+		base = region->region[i].base;
+		size = region->region[i].size;
+
+		pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
+		    name, i, base, base + size - 1, size);
+	}
+}
+
+void memblock_dump_all(void)
+{
+	if (!memblock_debug)
+		return;
+
+	pr_info("MEMBLOCK configuration:\n");
+	pr_info(" rmo_size    = 0x%llx\n", (unsigned long long)memblock.rmo_size);
+	pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size);
+
+	memblock_dump(&memblock.memory, "memory");
+	memblock_dump(&memblock.reserved, "reserved");
+}
+
+static unsigned long memblock_addrs_overlap(u64 base1, u64 size1, u64 base2,
+					u64 size2)
+{
+	return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
+}
+
+static long memblock_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
+{
+	if (base2 == base1 + size1)
+		return 1;
+	else if (base1 == base2 + size2)
+		return -1;
+
+	return 0;
+}
+
+static long memblock_regions_adjacent(struct memblock_region *rgn,
+		unsigned long r1, unsigned long r2)
+{
+	u64 base1 = rgn->region[r1].base;
+	u64 size1 = rgn->region[r1].size;
+	u64 base2 = rgn->region[r2].base;
+	u64 size2 = rgn->region[r2].size;
+
+	return memblock_addrs_adjacent(base1, size1, base2, size2);
+}
+
+static void memblock_remove_region(struct memblock_region *rgn, unsigned long r)
+{
+	unsigned long i;
+
+	for (i = r; i < rgn->cnt - 1; i++) {
+		rgn->region[i].base = rgn->region[i + 1].base;
+		rgn->region[i].size = rgn->region[i + 1].size;
+	}
+	rgn->cnt--;
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void memblock_coalesce_regions(struct memblock_region *rgn,
+		unsigned long r1, unsigned long r2)
+{
+	rgn->region[r1].size += rgn->region[r2].size;
+	memblock_remove_region(rgn, r2);
+}
+
+void __init memblock_init(void)
+{
+	/* Create a dummy zero size MEMBLOCK which will get coalesced away later.
+	 * This simplifies the memblock_add() code below...
+	 */
+	memblock.memory.region[0].base = 0;
+	memblock.memory.region[0].size = 0;
+	memblock.memory.cnt = 1;
+
+	/* Ditto. */
+	memblock.reserved.region[0].base = 0;
+	memblock.reserved.region[0].size = 0;
+	memblock.reserved.cnt = 1;
+}
+
+void __init memblock_analyze(void)
+{
+	int i;
+
+	memblock.memory.size = 0;
+
+	for (i = 0; i < memblock.memory.cnt; i++)
+		memblock.memory.size += memblock.memory.region[i].size;
+}
+
+static long memblock_add_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+	unsigned long coalesced = 0;
+	long adjacent, i;
+
+	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+		return 0;
+	}
+
+	/* First try and coalesce this MEMBLOCK with another. */
+	for (i = 0; i < rgn->cnt; i++) {
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
+
+		if ((rgnbase == base) && (rgnsize == size))
+			/* Already have this region, so we're done */
+			return 0;
+
+		adjacent = memblock_addrs_adjacent(base, size, rgnbase, rgnsize);
+		if (adjacent > 0) {
+			rgn->region[i].base -= size;
+			rgn->region[i].size += size;
+			coalesced++;
+			break;
+		} else if (adjacent < 0) {
+			rgn->region[i].size += size;
+			coalesced++;
+			break;
+		}
+	}
+
+	if ((i < rgn->cnt - 1) && memblock_regions_adjacent(rgn, i, i+1)) {
+		memblock_coalesce_regions(rgn, i, i+1);
+		coalesced++;
+	}
+
+	if (coalesced)
+		return coalesced;
+	if (rgn->cnt >= MAX_MEMBLOCK_REGIONS)
+		return -1;
+
+	/* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */
+	for (i = rgn->cnt - 1; i >= 0; i--) {
+		if (base < rgn->region[i].base) {
+			rgn->region[i+1].base = rgn->region[i].base;
+			rgn->region[i+1].size = rgn->region[i].size;
+		} else {
+			rgn->region[i+1].base = base;
+			rgn->region[i+1].size = size;
+			break;
+		}
+	}
+
+	if (base < rgn->region[0].base) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+	}
+	rgn->cnt++;
+
+	return 0;
+}
+
+long memblock_add(u64 base, u64 size)
+{
+	struct memblock_region *_rgn = &memblock.memory;
+
+	/* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */
+	if (base == 0)
+		memblock.rmo_size = size;
+
+	return memblock_add_region(_rgn, base, size);
+
+}
+
+static long __memblock_remove(struct memblock_region *rgn, u64 base, u64 size)
+{
+	u64 rgnbegin, rgnend;
+	u64 end = base + size;
+	int i;
+
+	rgnbegin = rgnend = 0; /* supress gcc warnings */
+
+	/* Find the region where (base, size) belongs to */
+	for (i=0; i < rgn->cnt; i++) {
+		rgnbegin = rgn->region[i].base;
+		rgnend = rgnbegin + rgn->region[i].size;
+
+		if ((rgnbegin <= base) && (end <= rgnend))
+			break;
+	}
+
+	/* Didn't find the region */
+	if (i == rgn->cnt)
+		return -1;
+
+	/* Check to see if we are removing entire region */
+	if ((rgnbegin == base) && (rgnend == end)) {
+		memblock_remove_region(rgn, i);
+		return 0;
+	}
+
+	/* Check to see if region is matching at the front */
+	if (rgnbegin == base) {
+		rgn->region[i].base = end;
+		rgn->region[i].size -= size;
+		return 0;
+	}
+
+	/* Check to see if the region is matching at the end */
+	if (rgnend == end) {
+		rgn->region[i].size -= size;
+		return 0;
+	}
+
+	/*
+	 * We need to split the entry -  adjust the current one to the
+	 * beginging of the hole and add the region after hole.
+	 */
+	rgn->region[i].size = base - rgn->region[i].base;
+	return memblock_add_region(rgn, end, rgnend - end);
+}
+
+long memblock_remove(u64 base, u64 size)
+{
+	return __memblock_remove(&memblock.memory, base, size);
+}
+
+long __init memblock_free(u64 base, u64 size)
+{
+	return __memblock_remove(&memblock.reserved, base, size);
+}
+
+long __init memblock_reserve(u64 base, u64 size)
+{
+	struct memblock_region *_rgn = &memblock.reserved;
+
+	BUG_ON(0 == size);
+
+	return memblock_add_region(_rgn, base, size);
+}
+
+long memblock_overlaps_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+	unsigned long i;
+
+	for (i = 0; i < rgn->cnt; i++) {
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
+		if (memblock_addrs_overlap(base, size, rgnbase, rgnsize))
+			break;
+	}
+
+	return (i < rgn->cnt) ? i : -1;
+}
+
+static u64 memblock_align_down(u64 addr, u64 size)
+{
+	return addr & ~(size - 1);
+}
+
+static u64 memblock_align_up(u64 addr, u64 size)
+{
+	return (addr + (size - 1)) & ~(size - 1);
+}
+
+static u64 __init memblock_alloc_nid_unreserved(u64 start, u64 end,
+					   u64 size, u64 align)
+{
+	u64 base, res_base;
+	long j;
+
+	base = memblock_align_down((end - size), align);
+	while (start <= base) {
+		j = memblock_overlaps_region(&memblock.reserved, base, size);
+		if (j < 0) {
+			/* this area isn't reserved, take it */
+			if (memblock_add_region(&memblock.reserved, base, size) < 0)
+				base = ~(u64)0;
+			return base;
+		}
+		res_base = memblock.reserved.region[j].base;
+		if (res_base < size)
+			break;
+		base = memblock_align_down(res_base - size, align);
+	}
+
+	return ~(u64)0;
+}
+
+static u64 __init memblock_alloc_nid_region(struct memblock_property *mp,
+				       u64 (*nid_range)(u64, u64, int *),
+				       u64 size, u64 align, int nid)
+{
+	u64 start, end;
+
+	start = mp->base;
+	end = start + mp->size;
+
+	start = memblock_align_up(start, align);
+	while (start < end) {
+		u64 this_end;
+		int this_nid;
+
+		this_end = nid_range(start, end, &this_nid);
+		if (this_nid == nid) {
+			u64 ret = memblock_alloc_nid_unreserved(start, this_end,
+							   size, align);
+			if (ret != ~(u64)0)
+				return ret;
+		}
+		start = this_end;
+	}
+
+	return ~(u64)0;
+}
+
+u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+			 u64 (*nid_range)(u64 start, u64 end, int *nid))
+{
+	struct memblock_region *mem = &memblock.memory;
+	int i;
+
+	BUG_ON(0 == size);
+
+	size = memblock_align_up(size, align);
+
+	for (i = 0; i < mem->cnt; i++) {
+		u64 ret = memblock_alloc_nid_region(&mem->region[i],
+					       nid_range,
+					       size, align, nid);
+		if (ret != ~(u64)0)
+			return ret;
+	}
+
+	return memblock_alloc(size, align);
+}
+
+u64 __init memblock_alloc(u64 size, u64 align)
+{
+	return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE);
+}
+
+u64 __init memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+	u64 alloc;
+
+	alloc = __memblock_alloc_base(size, align, max_addr);
+
+	if (alloc == 0)
+		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+		      (unsigned long long) size, (unsigned long long) max_addr);
+
+	return alloc;
+}
+
+u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+	long i, j;
+	u64 base = 0;
+	u64 res_base;
+
+	BUG_ON(0 == size);
+
+	size = memblock_align_up(size, align);
+
+	/* On some platforms, make sure we allocate lowmem */
+	/* Note that MEMBLOCK_REAL_LIMIT may be MEMBLOCK_ALLOC_ANYWHERE */
+	if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+		max_addr = MEMBLOCK_REAL_LIMIT;
+
+	for (i = memblock.memory.cnt - 1; i >= 0; i--) {
+		u64 memblockbase = memblock.memory.region[i].base;
+		u64 memblocksize = memblock.memory.region[i].size;
+
+		if (memblocksize < size)
+			continue;
+		if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+			base = memblock_align_down(memblockbase + memblocksize - size, align);
+		else if (memblockbase < max_addr) {
+			base = min(memblockbase + memblocksize, max_addr);
+			base = memblock_align_down(base - size, align);
+		} else
+			continue;
+
+		while (base && memblockbase <= base) {
+			j = memblock_overlaps_region(&memblock.reserved, base, size);
+			if (j < 0) {
+				/* this area isn't reserved, take it */
+				if (memblock_add_region(&memblock.reserved, base, size) < 0)
+					return 0;
+				return base;
+			}
+			res_base = memblock.reserved.region[j].base;
+			if (res_base < size)
+				break;
+			base = memblock_align_down(res_base - size, align);
+		}
+	}
+	return 0;
+}
+
+/* You must call memblock_analyze() before this. */
+u64 __init memblock_phys_mem_size(void)
+{
+	return memblock.memory.size;
+}
+
+u64 memblock_end_of_DRAM(void)
+{
+	int idx = memblock.memory.cnt - 1;
+
+	return (memblock.memory.region[idx].base + memblock.memory.region[idx].size);
+}
+
+/* You must call memblock_analyze() after this. */
+void __init memblock_enforce_memory_limit(u64 memory_limit)
+{
+	unsigned long i;
+	u64 limit;
+	struct memblock_property *p;
+
+	if (!memory_limit)
+		return;
+
+	/* Truncate the memblock regions to satisfy the memory limit. */
+	limit = memory_limit;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		if (limit > memblock.memory.region[i].size) {
+			limit -= memblock.memory.region[i].size;
+			continue;
+		}
+
+		memblock.memory.region[i].size = limit;
+		memblock.memory.cnt = i + 1;
+		break;
+	}
+
+	if (memblock.memory.region[0].size < memblock.rmo_size)
+		memblock.rmo_size = memblock.memory.region[0].size;
+
+	memory_limit = memblock_end_of_DRAM();
+
+	/* And truncate any reserves above the limit also. */
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		p = &memblock.reserved.region[i];
+
+		if (p->base > memory_limit)
+			p->size = 0;
+		else if ((p->base + p->size) > memory_limit)
+			p->size = memory_limit - p->base;
+
+		if (p->size == 0) {
+			memblock_remove_region(&memblock.reserved, i);
+			i--;
+		}
+	}
+}
+
+int __init memblock_is_reserved(u64 addr)
+{
+	int i;
+
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		u64 upper = memblock.reserved.region[i].base +
+			memblock.reserved.region[i].size - 1;
+		if ((addr >= memblock.reserved.region[i].base) && (addr <= upper))
+			return 1;
+	}
+	return 0;
+}
+
+int memblock_is_region_reserved(u64 base, u64 size)
+{
+	return memblock_overlaps_region(&memblock.reserved, base, size);
+}
+
+/*
+ * Given a <base, len>, find which memory regions belong to this range.
+ * Adjust the request and return a contiguous chunk.
+ */
+int memblock_find(struct memblock_property *res)
+{
+	int i;
+	u64 rstart, rend;
+
+	rstart = res->base;
+	rend = rstart + res->size - 1;
+
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		u64 start = memblock.memory.region[i].base;
+		u64 end = start + memblock.memory.region[i].size - 1;
+
+		if (start > rend)
+			return -1;
+
+		if ((end >= rstart) && (start < rend)) {
+			/* adjust the request */
+			if (rstart < start)
+				rstart = start;
+			if (rend > end)
+				rend = end;
+			res->base = rstart;
+			res->size = rend - rstart + 1;
+			return 0;
+		}
+	}
+	return -1;
+}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c6ece0a5759..20a8193a7af 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1370,7 +1370,7 @@ static void memcg_wakeup_oom(struct mem_cgroup *mem)
 
 static void memcg_oom_recover(struct mem_cgroup *mem)
 {
-	if (mem->oom_kill_disable && atomic_read(&mem->oom_lock))
+	if (atomic_read(&mem->oom_lock))
 		memcg_wakeup_oom(mem);
 }
 
@@ -3781,6 +3781,8 @@ static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
 		return -EINVAL;
 	}
 	mem->oom_kill_disable = val;
+	if (!val)
+		memcg_oom_recover(mem);
 	cgroup_unlock();
 	return 0;
 }
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 620b0b46159..6b44e52caca 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -45,6 +45,7 @@
 #include <linux/page-isolation.h>
 #include <linux/suspend.h>
 #include <linux/slab.h>
+#include <linux/swapops.h>
 #include "internal.h"
 
 int sysctl_memory_failure_early_kill __read_mostly = 0;
@@ -1296,3 +1297,35 @@ done:
 	/* keep elevated page count for bad page */
 	return ret;
 }
+
+/*
+ * The caller must hold current->mm->mmap_sem in read mode.
+ */
+int is_hwpoison_address(unsigned long addr)
+{
+	pgd_t *pgdp;
+	pud_t pud, *pudp;
+	pmd_t pmd, *pmdp;
+	pte_t pte, *ptep;
+	swp_entry_t entry;
+
+	pgdp = pgd_offset(current->mm, addr);
+	if (!pgd_present(*pgdp))
+		return 0;
+	pudp = pud_offset(pgdp, addr);
+	pud = *pudp;
+	if (!pud_present(pud) || pud_large(pud))
+		return 0;
+	pmdp = pmd_offset(pudp, addr);
+	pmd = *pmdp;
+	if (!pmd_present(pmd) || pmd_large(pmd))
+		return 0;
+	ptep = pte_offset_map(pmdp, addr);
+	pte = *ptep;
+	pte_unmap(ptep);
+	if (!is_swap_pte(pte))
+		return 0;
+	entry = pte_to_swp_entry(pte);
+	return is_hwpoison_entry(entry);
+}
+EXPORT_SYMBOL_GPL(is_hwpoison_address);
diff --git a/mm/memory.c b/mm/memory.c
index 119b7ccdf39..bde42c6d363 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1394,10 +1394,20 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				return i ? : -EFAULT;
 			}
 			if (pages) {
-				struct page *page = vm_normal_page(gate_vma, start, *pte);
+				struct page *page;
+
+				page = vm_normal_page(gate_vma, start, *pte);
+				if (!page) {
+					if (!(gup_flags & FOLL_DUMP) &&
+					     is_zero_pfn(pte_pfn(*pte)))
+						page = pte_page(*pte);
+					else {
+						pte_unmap(pte);
+						return i ? : -EFAULT;
+					}
+				}
 				pages[i] = page;
-				if (page)
-					get_page(page);
+				get_page(page);
 			}
 			pte_unmap(pte);
 			if (vmas)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5d6fb339de0..5bc0a96beb5 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2094,7 +2094,7 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 		NODEMASK_SCRATCH(scratch);
 
 		if (!scratch)
-			return;
+			goto put_mpol;
 		/* contextualize the tmpfs mount point mempolicy */
 		new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
 		if (IS_ERR(new))
@@ -2103,19 +2103,20 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 		task_lock(current);
 		ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
 		task_unlock(current);
-		mpol_put(mpol);	/* drop our ref on sb mpol */
 		if (ret)
-			goto put_free;
+			goto put_new;
 
 		/* Create pseudo-vma that contains just the policy */
 		memset(&pvma, 0, sizeof(struct vm_area_struct));
 		pvma.vm_end = TASK_SIZE;	/* policy covers entire file */
 		mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
 
-put_free:
+put_new:
 		mpol_put(new);			/* drop initial ref */
 free_scratch:
 		NODEMASK_SCRATCH_FREE(scratch);
+put_mpol:
+		mpol_put(mpol);	/* drop our incoming ref on sb mpol */
 	}
 }
 
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b289310e2c8..37498ef6154 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -495,7 +495,6 @@ static void balance_dirty_pages(struct address_space *mapping,
 
 	for (;;) {
 		struct writeback_control wbc = {
-			.bdi		= bdi,
 			.sync_mode	= WB_SYNC_NONE,
 			.older_than_this = NULL,
 			.nr_to_write	= write_chunk,
@@ -537,7 +536,7 @@ static void balance_dirty_pages(struct address_space *mapping,
 		 * up.
 		 */
 		if (bdi_nr_reclaimable > bdi_thresh) {
-			writeback_inodes_wbc(&wbc);
+			writeback_inodes_wb(&bdi->wb, &wbc);
 			pages_written += write_chunk - wbc.nr_to_write;
 			get_dirty_limits(&background_thresh, &dirty_thresh,
 				       &bdi_thresh, bdi);
@@ -597,7 +596,7 @@ static void balance_dirty_pages(struct address_space *mapping,
 	    (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
 			       + global_page_state(NR_UNSTABLE_NFS))
 					  > background_thresh)))
-		bdi_start_writeback(bdi, NULL, 0, 0);
+		bdi_start_background_writeback(bdi);
 }
 
 void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -705,9 +704,8 @@ void laptop_mode_timer_fn(unsigned long data)
 	 * We want to write everything out, not just down to the dirty
 	 * threshold
 	 */
-
 	if (bdi_has_dirty_io(&q->backing_dev_info))
-		bdi_start_writeback(&q->backing_dev_info, NULL, nr_pages, 0);
+		bdi_start_writeback(&q->backing_dev_info, nr_pages);
 }
 
 /*
@@ -835,7 +833,6 @@ int write_cache_pages(struct address_space *mapping,
 	pgoff_t done_index;
 	int cycled;
 	int range_whole = 0;
-	long nr_to_write = wbc->nr_to_write;
 
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
@@ -852,7 +849,22 @@ int write_cache_pages(struct address_space *mapping,
 		if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 			range_whole = 1;
 		cycled = 1; /* ignore range_cyclic tests */
+
+		/*
+		 * If this is a data integrity sync, cap the writeback to the
+		 * current end of file. Any extension to the file that occurs
+		 * after this is a new write and we don't need to write those
+		 * pages out to fulfil our data integrity requirements. If we
+		 * try to write them out, we can get stuck in this scan until
+		 * the concurrent writer stops adding dirty pages and extending
+		 * EOF.
+		 */
+		if (wbc->sync_mode == WB_SYNC_ALL &&
+		    wbc->range_end == LLONG_MAX) {
+			end = i_size_read(mapping->host) >> PAGE_CACHE_SHIFT;
+		}
 	}
+
 retry:
 	done_index = index;
 	while (!done && (index <= end)) {
@@ -935,11 +947,10 @@ continue_unlock:
 					done = 1;
 					break;
 				}
- 			}
+			}
 
-			if (nr_to_write > 0) {
-				nr_to_write--;
-				if (nr_to_write == 0 &&
+			if (wbc->nr_to_write > 0) {
+				if (--wbc->nr_to_write == 0 &&
 				    wbc->sync_mode == WB_SYNC_NONE) {
 					/*
 					 * We stop writing back only if we are
@@ -970,11 +981,8 @@ continue_unlock:
 		end = writeback_index - 1;
 		goto retry;
 	}
-	if (!wbc->no_nrwrite_index_update) {
-		if (wbc->range_cyclic || (range_whole && nr_to_write > 0))
-			mapping->writeback_index = done_index;
-		wbc->nr_to_write = nr_to_write;
-	}
+	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+		mapping->writeback_index = done_index;
 
 	return ret;
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 431214b941a..9bd339eb04c 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3634,6 +3634,9 @@ void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
 	int i;
 	void *ptr;
 
+	if (limit > get_max_mapped())
+		limit = get_max_mapped();
+
 	/* need to go over early_node_map to find out good range for node */
 	for_each_active_range_index_in_nid(i, nid) {
 		u64 addr;
@@ -3659,6 +3662,11 @@ void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
 		ptr = phys_to_virt(addr);
 		memset(ptr, 0, size);
 		reserve_early_without_check(addr, addr + size, "BOOTMEM");
+		/*
+		 * The min_count is set to 0 so that bootmem allocated blocks
+		 * are never reported as leaks.
+		 */
+		kmemleak_alloc(ptr, size, 0, 0);
 		return ptr;
 	}
 
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6c0081441a3..5bffada7cde 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -9,6 +9,7 @@
 #include <linux/vmalloc.h>
 #include <linux/cgroup.h>
 #include <linux/swapops.h>
+#include <linux/kmemleak.h>
 
 static void __meminit
 __init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -126,6 +127,12 @@ static int __init_refok init_section_page_cgroup(unsigned long pfn)
 			if (!base)
 				base = vmalloc(table_size);
 		}
+		/*
+		 * The value stored in section->page_cgroup is (base - pfn)
+		 * and it does not point to the memory block allocated above,
+		 * causing kmemleak false positives.
+		 */
+		kmemleak_not_leak(base);
 	} else {
 		/*
  		 * We don't have to allocate page_cgroup again, but
diff --git a/mm/percpu.c b/mm/percpu.c
index 39f7dfd5958..6470e771023 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -229,8 +229,8 @@ static int __maybe_unused pcpu_page_idx(unsigned int cpu, int page_idx)
 	return pcpu_unit_map[cpu] * pcpu_unit_pages + page_idx;
 }
 
-static unsigned long __maybe_unused pcpu_chunk_addr(struct pcpu_chunk *chunk,
-						unsigned int cpu, int page_idx)
+static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
+				     unsigned int cpu, int page_idx)
 {
 	return (unsigned long)chunk->base_addr + pcpu_unit_offsets[cpu] +
 		(page_idx << PAGE_SHIFT);
@@ -978,7 +978,32 @@ bool is_kernel_percpu_address(unsigned long addr)
  */
 phys_addr_t per_cpu_ptr_to_phys(void *addr)
 {
-	if (pcpu_addr_in_first_chunk(addr)) {
+	void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
+	bool in_first_chunk = false;
+	unsigned long first_start, first_end;
+	unsigned int cpu;
+
+	/*
+	 * The following test on first_start/end isn't strictly
+	 * necessary but will speed up lookups of addresses which
+	 * aren't in the first chunk.
+	 */
+	first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0);
+	first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu,
+				    pcpu_unit_pages);
+	if ((unsigned long)addr >= first_start &&
+	    (unsigned long)addr < first_end) {
+		for_each_possible_cpu(cpu) {
+			void *start = per_cpu_ptr(base, cpu);
+
+			if (addr >= start && addr < start + pcpu_unit_size) {
+				in_first_chunk = true;
+				break;
+			}
+		}
+	}
+
+	if (in_first_chunk) {
 		if ((unsigned long)addr < VMALLOC_START ||
 		    (unsigned long)addr >= VMALLOC_END)
 			return __pa(addr);
@@ -1086,7 +1111,7 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 	static int group_map[NR_CPUS] __initdata;
 	static int group_cnt[NR_CPUS] __initdata;
 	const size_t static_size = __per_cpu_end - __per_cpu_start;
-	int group_cnt_max = 0, nr_groups = 1, nr_units = 0;
+	int nr_groups = 1, nr_units = 0;
 	size_t size_sum, min_unit_size, alloc_size;
 	int upa, max_upa, uninitialized_var(best_upa);	/* units_per_alloc */
 	int last_allocs, group, unit;
@@ -1096,7 +1121,7 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 
 	/* this function may be called multiple times */
 	memset(group_map, 0, sizeof(group_map));
-	memset(group_cnt, 0, sizeof(group_map));
+	memset(group_cnt, 0, sizeof(group_cnt));
 
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
@@ -1130,7 +1155,6 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 		}
 		group_map[cpu] = group;
 		group_cnt[group]++;
-		group_cnt_max = max(group_cnt_max, group_cnt[group]);
 	}
 
 	/*
diff --git a/mm/shmem.c b/mm/shmem.c
index 7e5030ae18f..f65f84062db 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -764,10 +764,11 @@ done2:
 static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
 {
 	struct inode *inode = dentry->d_inode;
+	loff_t newsize = attr->ia_size;
 	int error;
 
-	if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
-		loff_t newsize = attr->ia_size;
+	if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
+					&& newsize != inode->i_size) {
 		struct page *page = NULL;
 
 		if (newsize < inode->i_size) {
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 915dceb487c..b94fe1b3da4 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -213,8 +213,9 @@ unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
 	list_for_each_entry(shrinker, &shrinker_list, list) {
 		unsigned long long delta;
 		unsigned long total_scan;
-		unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
+		unsigned long max_pass;
 
+		max_pass = (*shrinker->shrink)(shrinker, 0, gfp_mask);
 		delta = (4 * scanned) / shrinker->seeks;
 		delta *= max_pass;
 		do_div(delta, lru_pages + 1);
@@ -242,8 +243,9 @@ unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
 			int shrink_ret;
 			int nr_before;
 
-			nr_before = (*shrinker->shrink)(0, gfp_mask);
-			shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
+			nr_before = (*shrinker->shrink)(shrinker, 0, gfp_mask);
+			shrink_ret = (*shrinker->shrink)(shrinker, this_scan,
+								gfp_mask);
 			if (shrink_ret == -1)
 				break;
 			if (shrink_ret < nr_before)
@@ -296,7 +298,7 @@ static int may_write_to_queue(struct backing_dev_info *bdi)
 static void handle_write_error(struct address_space *mapping,
 				struct page *page, int error)
 {
-	lock_page(page);
+	lock_page_nosync(page);
 	if (page_mapping(page) == mapping)
 		mapping_set_error(mapping, error);
 	unlock_page(page);
@@ -1724,13 +1726,13 @@ static void shrink_zone(int priority, struct zone *zone,
  * If a zone is deemed to be full of pinned pages then just give it a light
  * scan then give up on it.
  */
-static int shrink_zones(int priority, struct zonelist *zonelist,
+static bool shrink_zones(int priority, struct zonelist *zonelist,
 					struct scan_control *sc)
 {
 	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 	struct zoneref *z;
 	struct zone *zone;
-	int progress = 0;
+	bool all_unreclaimable = true;
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
 					sc->nodemask) {
@@ -1757,9 +1759,9 @@ static int shrink_zones(int priority, struct zonelist *zonelist,
 		}
 
 		shrink_zone(priority, zone, sc);
-		progress = 1;
+		all_unreclaimable = false;
 	}
-	return progress;
+	return all_unreclaimable;
 }
 
 /*
@@ -1782,7 +1784,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 					struct scan_control *sc)
 {
 	int priority;
-	unsigned long ret = 0;
+	bool all_unreclaimable;
 	unsigned long total_scanned = 0;
 	struct reclaim_state *reclaim_state = current->reclaim_state;
 	unsigned long lru_pages = 0;
@@ -1813,7 +1815,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		sc->nr_scanned = 0;
 		if (!priority)
 			disable_swap_token();
-		ret = shrink_zones(priority, zonelist, sc);
+		all_unreclaimable = shrink_zones(priority, zonelist, sc);
 		/*
 		 * Don't shrink slabs when reclaiming memory from
 		 * over limit cgroups
@@ -1826,10 +1828,8 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 			}
 		}
 		total_scanned += sc->nr_scanned;
-		if (sc->nr_reclaimed >= sc->nr_to_reclaim) {
-			ret = sc->nr_reclaimed;
+		if (sc->nr_reclaimed >= sc->nr_to_reclaim)
 			goto out;
-		}
 
 		/*
 		 * Try to write back as many pages as we just scanned.  This
@@ -1849,9 +1849,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		    priority < DEF_PRIORITY - 2)
 			congestion_wait(BLK_RW_ASYNC, HZ/10);
 	}
-	/* top priority shrink_zones still had more to do? don't OOM, then */
-	if (ret && scanning_global_lru(sc))
-		ret = sc->nr_reclaimed;
+
 out:
 	/*
 	 * Now that we've scanned all the zones at this priority level, note
@@ -1877,7 +1875,14 @@ out:
 	delayacct_freepages_end();
 	put_mems_allowed();
 
-	return ret;
+	if (sc->nr_reclaimed)
+		return sc->nr_reclaimed;
+
+	/* top priority shrink_zones still had more to do? don't OOM, then */
+	if (scanning_global_lru(sc) && !all_unreclaimable)
+		return 1;
+
+	return 0;
 }
 
 unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
diff --git a/net/9p/client.c b/net/9p/client.c
index 37c8da07a80..dc6f2f26d02 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -460,7 +460,8 @@ static int p9_check_errors(struct p9_client *c, struct p9_req_t *req)
 			return err;
 		}
 
-		if (p9_is_proto_dotu(c))
+		if (p9_is_proto_dotu(c) ||
+			p9_is_proto_dotl(c))
 			err = -ecode;
 
 		if (!err || !IS_ERR_VALUE(err))
@@ -1015,14 +1016,18 @@ int p9_client_open(struct p9_fid *fid, int mode)
 	struct p9_qid qid;
 	int iounit;
 
-	P9_DPRINTK(P9_DEBUG_9P, ">>> TOPEN fid %d mode %d\n", fid->fid, mode);
-	err = 0;
 	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> %s fid %d mode %d\n",
+		p9_is_proto_dotl(clnt) ? "TLOPEN" : "TOPEN", fid->fid, mode);
+	err = 0;
 
 	if (fid->mode != -1)
 		return -EINVAL;
 
-	req = p9_client_rpc(clnt, P9_TOPEN, "db", fid->fid, mode);
+	if (p9_is_proto_dotl(clnt))
+		req = p9_client_rpc(clnt, P9_TLOPEN, "dd", fid->fid, mode);
+	else
+		req = p9_client_rpc(clnt, P9_TOPEN, "db", fid->fid, mode);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		goto error;
@@ -1034,10 +1039,9 @@ int p9_client_open(struct p9_fid *fid, int mode)
 		goto free_and_error;
 	}
 
-	P9_DPRINTK(P9_DEBUG_9P, "<<< ROPEN qid %x.%llx.%x iounit %x\n",
-				qid.type,
-				(unsigned long long)qid.path,
-				qid.version, iounit);
+	P9_DPRINTK(P9_DEBUG_9P, "<<< %s qid %x.%llx.%x iounit %x\n",
+		p9_is_proto_dotl(clnt) ? "RLOPEN" : "ROPEN",  qid.type,
+		(unsigned long long)qid.path, qid.version, iounit);
 
 	fid->mode = mode;
 	fid->iounit = iounit;
@@ -1049,6 +1053,50 @@ error:
 }
 EXPORT_SYMBOL(p9_client_open);
 
+int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
+		gid_t gid, struct p9_qid *qid)
+{
+	int err = 0;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+	int iounit;
+
+	P9_DPRINTK(P9_DEBUG_9P,
+			">>> TLCREATE fid %d name %s flags %d mode %d gid %d\n",
+			ofid->fid, name, flags, mode, gid);
+	clnt = ofid->clnt;
+
+	if (ofid->mode != -1)
+		return -EINVAL;
+
+	req = p9_client_rpc(clnt, P9_TLCREATE, "dsddd", ofid->fid, name, flags,
+			mode, gid);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Qd", qid, &iounit);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RLCREATE qid %x.%llx.%x iounit %x\n",
+			qid->type,
+			(unsigned long long)qid->path,
+			qid->version, iounit);
+
+	ofid->mode = mode;
+	ofid->iounit = iounit;
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_create_dotl);
+
 int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
 		     char *extension)
 {
@@ -1094,6 +1142,59 @@ error:
 }
 EXPORT_SYMBOL(p9_client_fcreate);
 
+int p9_client_symlink(struct p9_fid *dfid, char *name, char *symtgt, gid_t gid,
+		struct p9_qid *qid)
+{
+	int err = 0;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TSYMLINK dfid %d name %s  symtgt %s\n",
+			dfid->fid, name, symtgt);
+	clnt = dfid->clnt;
+
+	req = p9_client_rpc(clnt, P9_TSYMLINK, "dssd", dfid->fid, name, symtgt,
+			gid);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RSYMLINK qid %x.%llx.%x\n",
+			qid->type, (unsigned long long)qid->path, qid->version);
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_symlink);
+
+int p9_client_link(struct p9_fid *dfid, struct p9_fid *oldfid, char *newname)
+{
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TLINK dfid %d oldfid %d newname %s\n",
+			dfid->fid, oldfid->fid, newname);
+	clnt = dfid->clnt;
+	req = p9_client_rpc(clnt, P9_TLINK, "dds", dfid->fid, oldfid->fid,
+			newname);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RLINK\n");
+	p9_free_req(clnt, req);
+	return 0;
+}
+EXPORT_SYMBOL(p9_client_link);
+
 int p9_client_clunk(struct p9_fid *fid)
 {
 	int err;
@@ -1139,9 +1240,8 @@ int p9_client_remove(struct p9_fid *fid)
 	P9_DPRINTK(P9_DEBUG_9P, "<<< RREMOVE fid %d\n", fid->fid);
 
 	p9_free_req(clnt, req);
-	p9_fid_destroy(fid);
-
 error:
+	p9_fid_destroy(fid);
 	return err;
 }
 EXPORT_SYMBOL(p9_client_remove);
@@ -1302,6 +1402,65 @@ error:
 }
 EXPORT_SYMBOL(p9_client_stat);
 
+struct p9_stat_dotl *p9_client_getattr_dotl(struct p9_fid *fid,
+							u64 request_mask)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_stat_dotl *ret = kmalloc(sizeof(struct p9_stat_dotl),
+								GFP_KERNEL);
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TGETATTR fid %d, request_mask %lld\n",
+							fid->fid, request_mask);
+
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	err = 0;
+	clnt = fid->clnt;
+
+	req = p9_client_rpc(clnt, P9_TGETATTR, "dq", fid->fid, request_mask);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "A", ret);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		p9_free_req(clnt, req);
+		goto error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P,
+		"<<< RGETATTR st_result_mask=%lld\n"
+		"<<< qid=%x.%llx.%x\n"
+		"<<< st_mode=%8.8x st_nlink=%llu\n"
+		"<<< st_uid=%d st_gid=%d\n"
+		"<<< st_rdev=%llx st_size=%llx st_blksize=%llu st_blocks=%llu\n"
+		"<<< st_atime_sec=%lld st_atime_nsec=%lld\n"
+		"<<< st_mtime_sec=%lld st_mtime_nsec=%lld\n"
+		"<<< st_ctime_sec=%lld st_ctime_nsec=%lld\n"
+		"<<< st_btime_sec=%lld st_btime_nsec=%lld\n"
+		"<<< st_gen=%lld st_data_version=%lld",
+		ret->st_result_mask, ret->qid.type, ret->qid.path,
+		ret->qid.version, ret->st_mode, ret->st_nlink, ret->st_uid,
+		ret->st_gid, ret->st_rdev, ret->st_size, ret->st_blksize,
+		ret->st_blocks, ret->st_atime_sec, ret->st_atime_nsec,
+		ret->st_mtime_sec, ret->st_mtime_nsec, ret->st_ctime_sec,
+		ret->st_ctime_nsec, ret->st_btime_sec, ret->st_btime_nsec,
+		ret->st_gen, ret->st_data_version);
+
+	p9_free_req(clnt, req);
+	return ret;
+
+error:
+	kfree(ret);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL(p9_client_getattr_dotl);
+
 static int p9_client_statsize(struct p9_wstat *wst, int proto_version)
 {
 	int ret;
@@ -1366,6 +1525,36 @@ error:
 }
 EXPORT_SYMBOL(p9_client_wstat);
 
+int p9_client_setattr(struct p9_fid *fid, struct p9_iattr_dotl *p9attr)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TSETATTR fid %d\n", fid->fid);
+	P9_DPRINTK(P9_DEBUG_9P,
+		"    valid=%x mode=%x uid=%d gid=%d size=%lld\n"
+		"    atime_sec=%lld atime_nsec=%lld\n"
+		"    mtime_sec=%lld mtime_nsec=%lld\n",
+		p9attr->valid, p9attr->mode, p9attr->uid, p9attr->gid,
+		p9attr->size, p9attr->atime_sec, p9attr->atime_nsec,
+		p9attr->mtime_sec, p9attr->mtime_nsec);
+
+	req = p9_client_rpc(clnt, P9_TSETATTR, "dI", fid->fid, p9attr);
+
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RSETATTR fid %d\n", fid->fid);
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_setattr);
+
 int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb)
 {
 	int err;
@@ -1432,3 +1621,187 @@ error:
 }
 EXPORT_SYMBOL(p9_client_rename);
 
+/*
+ * An xattrwalk without @attr_name gives the fid for the lisxattr namespace
+ */
+struct p9_fid *p9_client_xattrwalk(struct p9_fid *file_fid,
+				const char *attr_name, u64 *attr_size)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+	struct p9_fid *attr_fid;
+
+	err = 0;
+	clnt = file_fid->clnt;
+	attr_fid = p9_fid_create(clnt);
+	if (IS_ERR(attr_fid)) {
+		err = PTR_ERR(attr_fid);
+		attr_fid = NULL;
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P,
+		">>> TXATTRWALK file_fid %d, attr_fid %d name %s\n",
+		file_fid->fid, attr_fid->fid, attr_name);
+
+	req = p9_client_rpc(clnt, P9_TXATTRWALK, "dds",
+			file_fid->fid, attr_fid->fid, attr_name);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	err = p9pdu_readf(req->rc, clnt->proto_version, "q", attr_size);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		p9_free_req(clnt, req);
+		goto clunk_fid;
+	}
+	p9_free_req(clnt, req);
+	P9_DPRINTK(P9_DEBUG_9P, "<<<  RXATTRWALK fid %d size %llu\n",
+		attr_fid->fid, *attr_size);
+	return attr_fid;
+clunk_fid:
+	p9_client_clunk(attr_fid);
+	attr_fid = NULL;
+error:
+	if (attr_fid && (attr_fid != file_fid))
+		p9_fid_destroy(attr_fid);
+
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(p9_client_xattrwalk);
+
+int p9_client_xattrcreate(struct p9_fid *fid, const char *name,
+			u64 attr_size, int flags)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+
+	P9_DPRINTK(P9_DEBUG_9P,
+		">>> TXATTRCREATE fid %d name  %s size %lld flag %d\n",
+		fid->fid, name, (long long)attr_size, flags);
+	err = 0;
+	clnt = fid->clnt;
+	req = p9_client_rpc(clnt, P9_TXATTRCREATE, "dsqd",
+			fid->fid, name, attr_size, flags);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RXATTRCREATE fid %d\n", fid->fid);
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL_GPL(p9_client_xattrcreate);
+
+int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset)
+{
+	int err, rsize, total;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+	char *dataptr;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TREADDIR fid %d offset %llu count %d\n",
+				fid->fid, (long long unsigned) offset, count);
+
+	err = 0;
+	clnt = fid->clnt;
+	total = 0;
+
+	rsize = fid->iounit;
+	if (!rsize || rsize > clnt->msize-P9_READDIRHDRSZ)
+		rsize = clnt->msize - P9_READDIRHDRSZ;
+
+	if (count < rsize)
+		rsize = count;
+
+	req = p9_client_rpc(clnt, P9_TREADDIR, "dqd", fid->fid, offset, rsize);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "D", &count, &dataptr);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RREADDIR count %d\n", count);
+
+	if (data)
+		memmove(data, dataptr, count);
+
+	p9_free_req(clnt, req);
+	return count;
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_readdir);
+
+int p9_client_mknod_dotl(struct p9_fid *fid, char *name, int mode,
+			dev_t rdev, gid_t gid, struct p9_qid *qid)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TMKNOD fid %d name %s mode %d major %d "
+		"minor %d\n", fid->fid, name, mode, MAJOR(rdev), MINOR(rdev));
+	req = p9_client_rpc(clnt, P9_TMKNOD, "dsdddd", fid->fid, name, mode,
+		MAJOR(rdev), MINOR(rdev), gid);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RMKNOD qid %x.%llx.%x\n", qid->type,
+				(unsigned long long)qid->path, qid->version);
+
+error:
+	p9_free_req(clnt, req);
+	return err;
+
+}
+EXPORT_SYMBOL(p9_client_mknod_dotl);
+
+int p9_client_mkdir_dotl(struct p9_fid *fid, char *name, int mode,
+				gid_t gid, struct p9_qid *qid)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TMKDIR fid %d name %s mode %d gid %d\n",
+		 fid->fid, name, mode, gid);
+	req = p9_client_rpc(clnt, P9_TMKDIR, "dsdd", fid->fid, name, mode,
+		gid);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RMKDIR qid %x.%llx.%x\n", qid->type,
+				(unsigned long long)qid->path, qid->version);
+
+error:
+	p9_free_req(clnt, req);
+	return err;
+
+}
+EXPORT_SYMBOL(p9_client_mkdir_dotl);
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 149f8216013..3acd3afb20c 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -141,6 +141,7 @@ pdu_write_u(struct p9_fcall *pdu, const char __user *udata, size_t size)
 	D - data blob (int32_t size followed by void *, results are not freed)
 	T - array of strings (int16_t count, followed by strings)
 	R - array of qids (int16_t count, followed by qids)
+	A - stat for 9p2000.L (p9_stat_dotl)
 	? - if optional = 1, continue parsing
 */
 
@@ -340,6 +341,33 @@ p9pdu_vreadf(struct p9_fcall *pdu, int proto_version, const char *fmt,
 				}
 			}
 			break;
+		case 'A': {
+				struct p9_stat_dotl *stbuf =
+				    va_arg(ap, struct p9_stat_dotl *);
+
+				memset(stbuf, 0, sizeof(struct p9_stat_dotl));
+				errcode =
+				    p9pdu_readf(pdu, proto_version,
+					"qQdddqqqqqqqqqqqqqqq",
+					&stbuf->st_result_mask,
+					&stbuf->qid,
+					&stbuf->st_mode,
+					&stbuf->st_uid, &stbuf->st_gid,
+					&stbuf->st_nlink,
+					&stbuf->st_rdev, &stbuf->st_size,
+					&stbuf->st_blksize, &stbuf->st_blocks,
+					&stbuf->st_atime_sec,
+					&stbuf->st_atime_nsec,
+					&stbuf->st_mtime_sec,
+					&stbuf->st_mtime_nsec,
+					&stbuf->st_ctime_sec,
+					&stbuf->st_ctime_nsec,
+					&stbuf->st_btime_sec,
+					&stbuf->st_btime_nsec,
+					&stbuf->st_gen,
+					&stbuf->st_data_version);
+			}
+			break;
 		case '?':
 			if ((proto_version != p9_proto_2000u) &&
 				(proto_version != p9_proto_2000L))
@@ -488,6 +516,23 @@ p9pdu_vwritef(struct p9_fcall *pdu, int proto_version, const char *fmt,
 				}
 			}
 			break;
+		case 'I':{
+				struct p9_iattr_dotl *p9attr = va_arg(ap,
+							struct p9_iattr_dotl *);
+
+				errcode = p9pdu_writef(pdu, proto_version,
+							"ddddqqqqq",
+							p9attr->valid,
+							p9attr->mode,
+							p9attr->uid,
+							p9attr->gid,
+							p9attr->size,
+							p9attr->atime_sec,
+							p9attr->atime_nsec,
+							p9attr->mtime_sec,
+							p9attr->mtime_nsec);
+			}
+			break;
 		case '?':
 			if ((proto_version != p9_proto_2000u) &&
 				(proto_version != p9_proto_2000L))
@@ -580,3 +625,30 @@ void p9pdu_reset(struct p9_fcall *pdu)
 	pdu->offset = 0;
 	pdu->size = 0;
 }
+
+int p9dirent_read(char *buf, int len, struct p9_dirent *dirent,
+						int proto_version)
+{
+	struct p9_fcall fake_pdu;
+	int ret;
+	char *nameptr;
+
+	fake_pdu.size = len;
+	fake_pdu.capacity = len;
+	fake_pdu.sdata = buf;
+	fake_pdu.offset = 0;
+
+	ret = p9pdu_readf(&fake_pdu, proto_version, "Qqbs", &dirent->qid,
+			&dirent->d_off, &dirent->d_type, &nameptr);
+	if (ret) {
+		P9_DPRINTK(P9_DEBUG_9P, "<<< p9dirent_read failed: %d\n", ret);
+		p9pdu_dump(1, &fake_pdu);
+		goto out;
+	}
+
+	strcpy(dirent->d_name, nameptr);
+
+out:
+	return fake_pdu.offset;
+}
+EXPORT_SYMBOL(p9dirent_read);
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 73affb8624f..8dc47f1d000 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -267,7 +267,7 @@ rpcauth_prune_expired(struct list_head *free, int nr_to_scan)
  * Run memory cache shrinker.
  */
 static int
-rpcauth_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+rpcauth_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(free);
 	int res;
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 2a9675136c6..7ca65c7005e 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -210,7 +210,8 @@ struct sock_xprt {
 	 * State of TCP reply receive
 	 */
 	__be32			tcp_fraghdr,
-				tcp_xid;
+				tcp_xid,
+				tcp_calldir;
 
 	u32			tcp_offset,
 				tcp_reclen;
@@ -927,7 +928,7 @@ static inline void xs_tcp_read_calldir(struct sock_xprt *transport,
 {
 	size_t len, used;
 	u32 offset;
-	__be32	calldir;
+	char *p;
 
 	/*
 	 * We want transport->tcp_offset to be 8 at the end of this routine
@@ -936,26 +937,33 @@ static inline void xs_tcp_read_calldir(struct sock_xprt *transport,
 	 * transport->tcp_offset is 4 (after having already read the xid).
 	 */
 	offset = transport->tcp_offset - sizeof(transport->tcp_xid);
-	len = sizeof(calldir) - offset;
+	len = sizeof(transport->tcp_calldir) - offset;
 	dprintk("RPC:       reading CALL/REPLY flag (%Zu bytes)\n", len);
-	used = xdr_skb_read_bits(desc, &calldir, len);
+	p = ((char *) &transport->tcp_calldir) + offset;
+	used = xdr_skb_read_bits(desc, p, len);
 	transport->tcp_offset += used;
 	if (used != len)
 		return;
 	transport->tcp_flags &= ~TCP_RCV_READ_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_DATA;
 	/*
 	 * We don't yet have the XDR buffer, so we will write the calldir
 	 * out after we get the buffer from the 'struct rpc_rqst'
 	 */
-	if (ntohl(calldir) == RPC_REPLY)
+	switch (ntohl(transport->tcp_calldir)) {
+	case RPC_REPLY:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags |= TCP_RPC_REPLY;
-	else
+		break;
+	case RPC_CALL:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags &= ~TCP_RPC_REPLY;
-	dprintk("RPC:       reading %s CALL/REPLY flag %08x\n",
-			(transport->tcp_flags & TCP_RPC_REPLY) ?
-				"reply for" : "request with", calldir);
+		break;
+	default:
+		dprintk("RPC:       invalid request message type\n");
+		xprt_force_disconnect(&transport->xprt);
+	}
 	xs_tcp_check_fraghdr(transport);
 }
 
@@ -975,12 +983,10 @@ static inline void xs_tcp_read_common(struct rpc_xprt *xprt,
 		/*
 		 * Save the RPC direction in the XDR buffer
 		 */
-		__be32	calldir = transport->tcp_flags & TCP_RPC_REPLY ?
-					htonl(RPC_REPLY) : 0;
-
 		memcpy(rcvbuf->head[0].iov_base + transport->tcp_copied,
-			&calldir, sizeof(calldir));
-		transport->tcp_copied += sizeof(calldir);
+			&transport->tcp_calldir,
+			sizeof(transport->tcp_calldir));
+		transport->tcp_copied += sizeof(transport->tcp_calldir);
 		transport->tcp_flags &= ~TCP_RCV_COPY_CALLDIR;
 	}
 
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 0b94d2fa3a8..e4deb73e9a8 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -82,7 +82,7 @@ ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
 lib-target := $(obj)/lib.a
 endif
 
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
 builtin-target := $(obj)/built-in.o
 endif
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index cbcd654215e..54fd1b70013 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -241,7 +241,7 @@ cmd_lzma = (cat $(filter-out FORCE,$^) | \
 	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 	(rm -f $@ ; false)
 
-quiet_cmd_lzo = LZO    $@
+quiet_cmd_lzo = LZO     $@
 cmd_lzo = (cat $(filter-out FORCE,$^) | \
 	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 	(rm -f $@ ; false)
diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin
index 102a276f6ee..1adb974e695 100644
--- a/scripts/Makefile.modbuiltin
+++ b/scripts/Makefile.modbuiltin
@@ -14,6 +14,11 @@ __modbuiltin:
 
 include scripts/Kbuild.include
 
+ifneq ($(KBUILD_SRC),)
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+endif
+
 # The filename Kbuild has precedence over Makefile
 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
diff --git a/scripts/checkincludes.pl b/scripts/checkincludes.pl
index 676ddc07d6f..97b2c6143fe 100755
--- a/scripts/checkincludes.pl
+++ b/scripts/checkincludes.pl
@@ -11,6 +11,8 @@
 # you do have real dups and do not have them under #ifdef's. You
 # could also just review the results.
 
+use strict;
+
 sub usage {
 	print "Usage: checkincludes.pl [-r]\n";
 	print "By default we just warn of duplicates\n";
@@ -35,23 +37,24 @@ if ($#ARGV >= 1) {
 	}
 }
 
-foreach $file (@ARGV) {
-	open(FILE, $file) or die "Cannot open $file: $!.\n";
+foreach my $file (@ARGV) {
+	open(my $f, '<', $file)
+	    or die "Cannot open $file: $!.\n";
 
 	my %includedfiles = ();
 	my @file_lines = ();
 
-	while (<FILE>) {
+	while (<$f>) {
 		if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
 			++$includedfiles{$1};
 		}
 		push(@file_lines, $_);
 	}
 
-	close(FILE);
+	close($f);
 
 	if (!$remove) {
-		foreach $filename (keys %includedfiles) {
+		foreach my $filename (keys %includedfiles) {
 			if ($includedfiles{$filename} > 1) {
 				print "$file: $filename is included more than once.\n";
 			}
@@ -59,27 +62,28 @@ foreach $file (@ARGV) {
 		next;
 	}
 
-	open(FILE,">$file") || die("Cannot write to $file: $!");
+	open($f, '>', $file)
+	    or die("Cannot write to $file: $!");
 
 	my $dups = 0;
 	foreach (@file_lines) {
 		if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
-			foreach $filename (keys %includedfiles) {
+			foreach my $filename (keys %includedfiles) {
 				if ($1 eq $filename) {
 					if ($includedfiles{$filename} > 1) {
 						$includedfiles{$filename}--;
 						$dups++;
 					} else {
-						print FILE $_;
+						print {$f} $_;
 					}
 				}
 			}
 		} else {
-			print FILE $_;
+			print {$f} $_;
 		}
 	}
 	if ($dups > 0) {
 		print "$file: removed $dups duplicate includes\n";
 	}
-	close(FILE);
+	close($f);
 }
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 14ee68e991d..1afff6658a7 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -21,6 +21,8 @@
 #
 #	TODO :	Port to all architectures (one regex per arch)
 
+use strict;
+
 # check for arch
 #
 # $re is used for two matches:
@@ -104,19 +106,11 @@ my (@stack, $re, $dre, $x, $xs);
 	}
 }
 
-sub bysize($) {
-	my ($asize, $bsize);
-	($asize = $a) =~ s/.*:	*(.*)$/$1/;
-	($bsize = $b) =~ s/.*:	*(.*)$/$1/;
-	$bsize <=> $asize
-}
-
 #
 # main()
 #
 my $funcre = qr/^$x* <(.*)>:$/;
-my $func;
-my $file, $lastslash;
+my ($func, $file, $lastslash);
 
 while (my $line = <STDIN>) {
 	if ($line =~ m/$funcre/) {
@@ -173,4 +167,6 @@ while (my $line = <STDIN>) {
 	}
 }
 
-print sort bysize @stack;
+# Sort output by size (last field)
+print sort { ($b =~ /:\t*(\d+)$/)[0] <=> ($a =~ /:\t*(\d+)$/)[0] } @stack;
+
diff --git a/scripts/checkversion.pl b/scripts/checkversion.pl
index ec7d21161bd..b444e89a009 100755
--- a/scripts/checkversion.pl
+++ b/scripts/checkversion.pl
@@ -5,23 +5,22 @@
 # including <linux/version.h> that don't need it.
 # Copyright (C) 2003, Randy Dunlap <rdunlap@xenotime.net>
 
+use strict;
+
 $| = 1;
 
-my $debugging = 0;
+my $debugging;
 
-foreach $file (@ARGV)
-{
+foreach my $file (@ARGV) {
     # Open this file.
-    open(FILE, $file) || die "Can't open $file: $!\n";
+    open( my $f, '<', $file )
+      or die "Can't open $file: $!\n";
 
     # Initialize variables.
-    my $fInComment   = 0;
-    my $fInString    = 0;
-    my $fUseVersion   = 0;
+    my ($fInComment, $fInString, $fUseVersion);
     my $iLinuxVersion = 0;
 
-    LINE: while ( <FILE> )
-    {
+    while (<$f>) {
 	# Strip comments.
 	$fInComment && (s+^.*?\*/+ +o ? ($fInComment = 0) : next);
 	m+/\*+o && (s+/\*.*?\*/+ +go, (s+/\*.*$+ +o && ($fInComment = 1)));
@@ -43,8 +42,8 @@ foreach $file (@ARGV)
 	# Look for uses: LINUX_VERSION_CODE, KERNEL_VERSION, UTS_RELEASE
 	if (($_ =~ /LINUX_VERSION_CODE/) || ($_ =~ /\WKERNEL_VERSION/)) {
 	    $fUseVersion = 1;
-	    last LINE if $iLinuxVersion;
-	}
+            last if $iLinuxVersion;
+        }
     }
 
     # Report used version IDs without include?
@@ -67,5 +66,5 @@ foreach $file (@ARGV)
         }
     }
 
-    close(FILE);
+    close($f);
 }
diff --git a/scripts/decodecode b/scripts/decodecode
index 4b00647814b..8b30cc36744 100755
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -7,7 +7,7 @@
 # AFLAGS=--32 decodecode < 386.oops
 
 cleanup() {
-	rm -f $T $T.s $T.o $T.oo $T.aa  $T.aaa
+	rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
 	exit 1
 }
 
@@ -39,6 +39,29 @@ fi
 echo $code
 code=`echo $code | sed -e 's/.*Code: //'`
 
+width=`expr index "$code" ' '`
+width=$[($width-1)/2]
+case $width in
+1) type=byte ;;
+2) type=2byte ;;
+4) type=4byte ;;
+esac
+
+disas() {
+	${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s &> /dev/null
+
+	if [ "$ARCH" == "arm" ]; then
+		if [ $width == 2 ]; then
+			OBJDUMPFLAGS="-M force-thumb"
+		fi
+
+		${CROSS_COMPILE}strip $1.o
+	fi
+
+	${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $1.o | \
+		grep -v "/tmp\|Disassembly\|\.text\|^$" &> $1.dis
+}
+
 marker=`expr index "$code" "\<"`
 if [ $marker -eq 0 ]; then
 	marker=`expr index "$code" "\("`
@@ -49,26 +72,25 @@ if [ $marker -ne 0 ]; then
 	echo All code >> $T.oo
 	echo ======== >> $T.oo
 	beforemark=`echo "$code"`
-	echo -n "	.byte 0x" > $T.s
-	echo $beforemark | sed -e 's/ /,0x/g' | sed -e 's/<//g' | sed -e 's/>//g' >> $T.s
-	as $AFLAGS -o $T.o $T.s &> /dev/null
-	objdump -S $T.o | grep -v "/tmp" | grep -v "Disassembly" | grep -v "\.text" | grep -v "^$" &> $T.ooo
-	cat $T.ooo >> $T.oo
-	rm -f $T.o $T.s  $T.ooo
+	echo -n "	.$type 0x" > $T.s
+	echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
+	disas $T
+	cat $T.dis >> $T.oo
+	rm -f $T.o $T.s $T.dis
 
 # and fix code at-and-after marker
 	code=`echo "$code" | cut -c$((${marker} + 1))-`
 fi
 echo Code starting with the faulting instruction  > $T.aa
 echo =========================================== >> $T.aa
-code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g'`
-echo -n "	.byte 0x" > $T.s
+code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
+echo -n "	.$type 0x" > $T.s
 echo $code >> $T.s
-as $AFLAGS -o $T.o $T.s &> /dev/null
-objdump -S $T.o | grep -v "Disassembly" | grep -v "/tmp" | grep -v "\.text" | grep -v "^$" &> $T.aaa
-cat $T.aaa >> $T.aa
+disas $T
+cat $T.dis >> $T.aa
 
-faultline=`cat $T.aaa | head -1 | cut -d":" -f2`
+faultline=`cat $T.dis | head -1 | cut -d":" -f2`
+faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
 
 cat $T.oo | sed -e "s/\($faultline\)/\*\1     <-- trapping instruction/g"
 echo
diff --git a/scripts/export_report.pl b/scripts/export_report.pl
index 705b5ba7c15..04dce7c15f8 100644
--- a/scripts/export_report.pl
+++ b/scripts/export_report.pl
@@ -49,10 +49,10 @@ sub usage {
 }
 
 sub collectcfiles {
-        my @file = `cat .tmp_versions/*.mod | grep '.*\.ko\$'`;
-        @file = grep {s/\.ko/.mod.c/} @file;
-	chomp @file;
-        return @file;
+    my @file
+	= `cat .tmp_versions/*.mod | grep '.*\.ko\$' | sed s/\.ko$/.mod.c/`;
+    chomp @file;
+    return @file;
 }
 
 my (%SYMBOL, %MODULE, %opt, @allcfiles);
@@ -71,37 +71,40 @@ if (not defined $opt{'k'}) {
 	$opt{'k'} = "Module.symvers";
 }
 
-unless (open(MODULE_SYMVERS, $opt{'k'})) {
-	die "Sorry, cannot open $opt{'k'}: $!\n";
-}
+open (my $module_symvers, '<', $opt{'k'})
+    or die "Sorry, cannot open $opt{'k'}: $!\n";
 
 if (defined $opt{'o'}) {
-	unless (open(OUTPUT_HANDLE, ">$opt{'o'}")) {
-		die "Sorry, cannot open $opt{'o'} $!\n";
-	}
-	select OUTPUT_HANDLE;
+    open (my $out, '>', $opt{'o'})
+	or die "Sorry, cannot open $opt{'o'} $!\n";
+
+    select $out;
 }
+
 #
 # collect all the symbols and their attributes from the
 # Module.symvers file
 #
-while ( <MODULE_SYMVERS> ) {
+while ( <$module_symvers> ) {
 	chomp;
 	my (undef, $symbol, $module, $gpl) = split;
 	$SYMBOL { $symbol } =  [ $module , "0" , $symbol, $gpl];
 }
-close(MODULE_SYMVERS);
+close($module_symvers);
 
 #
 # collect the usage count of each symbol.
 #
 foreach my $thismod (@allcfiles) {
-	unless (open(MODULE_MODULE, $thismod)) {
-		print "Sorry, cannot open $thismod: $!\n";
+	my $module;
+
+	unless (open ($module, '<', $thismod)) {
+		warn "Sorry, cannot open $thismod: $!\n";
 		next;
 	}
+
 	my $state=0;
-	while ( <MODULE_MODULE> ) {
+	while ( <$module> ) {
 		chomp;
 		if ($state == 0) {
 			$state = 1 if ($_ =~ /static const struct modversion_info/);
@@ -124,7 +127,7 @@ foreach my $thismod (@allcfiles) {
 	if ($state != 2) {
 		print "WARNING:$thismod is not built with CONFIG_MODVERSION enabled\n";
 	}
-	close(MODULE_MODULE);
+	close($module);
 }
 
 print "\tThis file reports the exported symbols usage patterns by in-tree\n",
diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh
index a932ae52f92..5958fffb211 100644
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -202,6 +202,7 @@ input_file() {
 			print_mtime "$1" >> ${output}
 			cat "$1"         >> ${output}
 		else
+		        echo "$1 \\"
 			cat "$1" | while read type dir file perm ; do
 				if [ "$type" == "file" ]; then
 					echo "$file \\";
@@ -231,7 +232,7 @@ arg="$1"
 case "$arg" in
 	"-l")	# files included in initramfs - used by kbuild
 		dep_list="list_"
-		echo "deps_initramfs := \\"
+		echo "deps_initramfs := $0 \\"
 		shift
 		;;
 	"-o")	# generate compressed cpio image named $1
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index af6b8363a2d..f99115ebe92 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -758,8 +758,10 @@ int main(int argc, char **argv)
 		/* setlinebuf(debugfile); */
 	}
 
-	if (flag_reference)
+	if (flag_reference) {
 		read_reference(ref_file);
+		fclose(ref_file);
+	}
 
 	yyparse();
 
diff --git a/scripts/headerdep.pl b/scripts/headerdep.pl
index b7f6c560e24..8dd019bc5a7 100755
--- a/scripts/headerdep.pl
+++ b/scripts/headerdep.pl
@@ -80,8 +80,7 @@ sub search {
 		my $path = "$i/$filename";
 		return $path if -f $path;
 	}
-
-	return undef;
+	return;
 }
 
 sub parse_all {
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
index db1dd7a549f..50d6cfd1fa7 100644
--- a/scripts/headers_check.pl
+++ b/scripts/headers_check.pl
@@ -28,11 +28,12 @@ my $lineno = 0;
 my $filename;
 
 foreach my $file (@files) {
-	local *FH;
 	$filename = $file;
-	open(FH, "<$filename") or die "$filename: $!\n";
+
+	open(my $fh, '<', $filename)
+		or die "$filename: $!\n";
 	$lineno = 0;
-	while ($line = <FH>) {
+	while ($line = <$fh>) {
 		$lineno++;
 		&check_include();
 		&check_asm_types();
@@ -40,7 +41,7 @@ foreach my $file (@files) {
 		&check_declarations();
 		# Dropped for now. Too much noise &check_config();
 	}
-	close FH;
+	close $fh;
 }
 exit $ret;
 
@@ -78,7 +79,7 @@ sub check_config
 }
 
 my $linux_asm_types;
-sub check_asm_types()
+sub check_asm_types
 {
 	if ($filename =~ /types.h|int-l64.h|int-ll64.h/o) {
 		return;
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
index b89ca2c58fd..4ca3be3b2e5 100644
--- a/scripts/headers_install.pl
+++ b/scripts/headers_install.pl
@@ -23,13 +23,13 @@ my ($readdir, $installdir, $arch, @files) = @ARGV;
 my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__";
 
 foreach my $file (@files) {
-	local *INFILE;
-	local *OUTFILE;
 	my $tmpfile = "$installdir/$file.tmp";
-	open(INFILE, "<$readdir/$file")
-		or die "$readdir/$file: $!\n";
-	open(OUTFILE, ">$tmpfile") or die "$tmpfile: $!\n";
-	while (my $line = <INFILE>) {
+
+	open(my $in, '<', "$readdir/$file")
+	    or die "$readdir/$file: $!\n";
+	open(my $out, '>', $tmpfile)
+	    or die "$tmpfile: $!\n";
+	while (my $line = <$in>) {
 		$line =~ s/([\s(])__user\s/$1/g;
 		$line =~ s/([\s(])__force\s/$1/g;
 		$line =~ s/([\s(])__iomem\s/$1/g;
@@ -39,10 +39,11 @@ foreach my $file (@files) {
 		$line =~ s/(^|\s)(inline)\b/$1__$2__/g;
 		$line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g;
 		$line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g;
-		printf OUTFILE "%s", $line;
+		printf {$out} "%s", $line;
 	}
-	close OUTFILE;
-	close INFILE;
+	close $out;
+	close $in;
+
 	system $unifdef . " $tmpfile > $installdir/$file";
 	unlink $tmpfile;
 }
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 86c3896a1e0..e3902fb39af 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -108,8 +108,10 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	rc = fscanf(in, "%llx %c %499s\n", &s->addr, &stype, str);
 	if (rc != 3) {
 		if (rc != EOF) {
-			/* skip line */
-			fgets(str, 500, in);
+			/* skip line. sym is used as dummy to
+			 * shut of "warn_unused_result" warning.
+			 */
+			sym = fgets(str, 500, in);
 		}
 		return -1;
 	}
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 186c46604d0..7ea649da194 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -23,6 +23,9 @@ menuconfig: $(obj)/mconf
 config: $(obj)/conf
 	$< $(Kconfig)
 
+nconfig: $(obj)/nconf
+	$< $(Kconfig)
+
 oldconfig: $(obj)/conf
 	$< -o $(Kconfig)
 
@@ -120,6 +123,7 @@ endif
 # Help text used by make help
 help:
 	@echo  '  config	  - Update current config utilising a line-oriented program'
+	@echo  '  nconfig         - Update current config utilising a ncurses menu based program'
 	@echo  '  menuconfig	  - Update current config utilising a menu based program'
 	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
 	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
@@ -147,6 +151,8 @@ HOST_EXTRACFLAGS += -DLOCALE
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
 # conf:	  Used for defconfig, oldconfig and related targets
+# nconf:  Used for the nconfig target.
+#         Utilizes ncurses
 # mconf:  Used for the menuconfig target
 #         Utilizes the lxdialog package
 # qconf:  Used for the xconfig target
@@ -159,11 +165,16 @@ lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
 lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
 
 conf-objs	:= conf.o  zconf.tab.o
-mconf-objs	:= mconf.o zconf.tab.o $(lxdialog)
+mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
+nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
 kxgettext-objs	:= kxgettext.o zconf.tab.o
 
 hostprogs-y := conf qconf gconf kxgettext
 
+ifeq ($(MAKECMDGOALS),nconfig)
+	hostprogs-y += nconf
+endif
+
 ifeq ($(MAKECMDGOALS),menuconfig)
 	hostprogs-y += mconf
 endif
@@ -187,7 +198,7 @@ endif
 
 clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck \
 		   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
-clean-files     += mconf qconf gconf
+clean-files     += mconf qconf gconf nconf
 clean-files     += config.pot linux.pot
 
 # Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
@@ -208,10 +219,11 @@ HOSTCFLAGS_zconf.tab.o	:= -I$(src)
 HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
 HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
 
-HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
 HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                           -D LKC_DIRECT_LINK
 
+HOSTLOADLIBES_nconf	= -lmenu -lpanel -lncurses
 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
 
 ifeq ($(qconf-target),1)
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index edd3f39a080..d83f2322893 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -1097,9 +1097,32 @@ void expr_fprint(struct expr *e, FILE *out)
 
 static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str)
 {
-	str_append((struct gstr*)data, str);
+	struct gstr *gs = (struct gstr*)data;
+	const char *sym_str = NULL;
+
+	if (sym)
+		sym_str = sym_get_string_value(sym);
+
+	if (gs->max_width) {
+		unsigned extra_length = strlen(str);
+		const char *last_cr = strrchr(gs->s, '\n');
+		unsigned last_line_length;
+
+		if (sym_str)
+			extra_length += 4 + strlen(sym_str);
+
+		if (!last_cr)
+			last_cr = gs->s;
+
+		last_line_length = strlen(gs->s) - (last_cr - gs->s);
+
+		if ((last_line_length + extra_length) > gs->max_width)
+			str_append(gs, "\\\n");
+	}
+
+	str_append(gs, str);
 	if (sym)
-		str_printf((struct gstr*)data, " [=%s]", sym_get_string_value(sym));
+		str_printf(gs, " [=%s]", sym_str);
 }
 
 void expr_gstr_print(struct expr *e, struct gstr *gs)
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 6408fefae08..891cd9ce9ba 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -86,7 +86,7 @@ struct symbol {
 	struct expr_value rev_dep;
 };
 
-#define for_all_symbols(i, sym) for (i = 0; i < 257; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
+#define for_all_symbols(i, sym) for (i = 0; i < SYMBOL_HASHSIZE; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
 
 #define SYMBOL_CONST      0x0001  /* symbol is const */
 #define SYMBOL_CHECK      0x0008  /* used during dependency checking */
@@ -108,8 +108,7 @@ struct symbol {
 #define SYMBOL_DEF4       0x80000  /* symbol.def[S_DEF_4] is valid */
 
 #define SYMBOL_MAXLENGTH	256
-#define SYMBOL_HASHSIZE		257
-#define SYMBOL_HASHMASK		0xff
+#define SYMBOL_HASHSIZE		9973
 
 /* A property represent the config options that can be associated
  * with a config "symbol".
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index 65464366fe3..bef10411837 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -30,13 +30,16 @@ enum {
 	SINGLE_VIEW, SPLIT_VIEW, FULL_VIEW
 };
 
+enum {
+	OPT_NORMAL, OPT_ALL, OPT_PROMPT
+};
+
 static gint view_mode = FULL_VIEW;
 static gboolean show_name = TRUE;
 static gboolean show_range = TRUE;
 static gboolean show_value = TRUE;
-static gboolean show_all = FALSE;
-static gboolean show_debug = FALSE;
 static gboolean resizeable = FALSE;
+static int opt_mode = OPT_NORMAL;
 
 GtkWidget *main_wnd = NULL;
 GtkWidget *tree1_w = NULL;	// left  frame
@@ -76,36 +79,7 @@ static void conf_changed(void);
 
 /* Helping/Debugging Functions */
 
-
-const char *dbg_print_stype(int val)
-{
-	static char buf[256];
-
-	bzero(buf, 256);
-
-	if (val == S_UNKNOWN)
-		strcpy(buf, "unknown");
-	if (val == S_BOOLEAN)
-		strcpy(buf, "boolean");
-	if (val == S_TRISTATE)
-		strcpy(buf, "tristate");
-	if (val == S_INT)
-		strcpy(buf, "int");
-	if (val == S_HEX)
-		strcpy(buf, "hex");
-	if (val == S_STRING)
-		strcpy(buf, "string");
-	if (val == S_OTHER)
-		strcpy(buf, "other");
-
-#ifdef DEBUG
-	printf("%s", buf);
-#endif
-
-	return buf;
-}
-
-const char *dbg_print_flags(int val)
+const char *dbg_sym_flags(int val)
 {
 	static char buf[256];
 
@@ -131,40 +105,10 @@ const char *dbg_print_flags(int val)
 		strcat(buf, "auto/");
 
 	buf[strlen(buf) - 1] = '\0';
-#ifdef DEBUG
-	printf("%s", buf);
-#endif
-
-	return buf;
-}
-
-const char *dbg_print_ptype(int val)
-{
-	static char buf[256];
-
-	bzero(buf, 256);
-
-	if (val == P_UNKNOWN)
-		strcpy(buf, "unknown");
-	if (val == P_PROMPT)
-		strcpy(buf, "prompt");
-	if (val == P_COMMENT)
-		strcpy(buf, "comment");
-	if (val == P_MENU)
-		strcpy(buf, "menu");
-	if (val == P_DEFAULT)
-		strcpy(buf, "default");
-	if (val == P_CHOICE)
-		strcpy(buf, "choice");
-
-#ifdef DEBUG
-	printf("%s", buf);
-#endif
 
 	return buf;
 }
 
-
 void replace_button_icon(GladeXML * xml, GdkDrawable * window,
 			 GtkStyle * style, gchar * btn_name, gchar ** xpm)
 {
@@ -697,20 +641,29 @@ void on_show_data1_activate(GtkMenuItem * menuitem, gpointer user_data)
 
 
 void
-on_show_all_options1_activate(GtkMenuItem * menuitem, gpointer user_data)
+on_set_option_mode1_activate(GtkMenuItem *menuitem, gpointer user_data)
 {
-	show_all = GTK_CHECK_MENU_ITEM(menuitem)->active;
+	opt_mode = OPT_NORMAL;
+	gtk_tree_store_clear(tree2);
+	display_tree(&rootmenu);	/* instead of update_tree to speed-up */
+}
+
 
+void
+on_set_option_mode2_activate(GtkMenuItem *menuitem, gpointer user_data)
+{
+	opt_mode = OPT_ALL;
 	gtk_tree_store_clear(tree2);
-	display_tree(&rootmenu);	// instead of update_tree to speed-up
+	display_tree(&rootmenu);	/* instead of update_tree to speed-up */
 }
 
 
 void
-on_show_debug_info1_activate(GtkMenuItem * menuitem, gpointer user_data)
+on_set_option_mode3_activate(GtkMenuItem *menuitem, gpointer user_data)
 {
-	show_debug = GTK_CHECK_MENU_ITEM(menuitem)->active;
-	update_tree(&rootmenu, NULL);
+	opt_mode = OPT_PROMPT;
+	gtk_tree_store_clear(tree2);
+	display_tree(&rootmenu);	/* instead of update_tree to speed-up */
 }
 
 
@@ -1163,7 +1116,10 @@ static gchar **fill_row(struct menu *menu)
 	    g_strdup_printf("%s %s", _(menu_get_prompt(menu)),
 			    sym && sym_has_value(sym) ? "(NEW)" : "");
 
-	if (show_all && !menu_is_visible(menu))
+	if (opt_mode == OPT_ALL && !menu_is_visible(menu))
+		row[COL_COLOR] = g_strdup("DarkGray");
+	else if (opt_mode == OPT_PROMPT &&
+			menu_has_prompt(menu) && !menu_is_visible(menu))
 		row[COL_COLOR] = g_strdup("DarkGray");
 	else
 		row[COL_COLOR] = g_strdup("Black");
@@ -1386,16 +1342,19 @@ static void update_tree(struct menu *src, GtkTreeIter * dst)
 		       menu2 ? menu_get_prompt(menu2) : "nil");
 #endif
 
-		if (!menu_is_visible(child1) && !show_all) {	// remove node
+		if ((opt_mode == OPT_NORMAL && !menu_is_visible(child1)) ||
+		    (opt_mode == OPT_PROMPT && !menu_has_prompt(child1))) {
+
+			/* remove node */
 			if (gtktree_iter_find_node(dst, menu1) != NULL) {
 				memcpy(&tmp, child2, sizeof(GtkTreeIter));
 				valid = gtk_tree_model_iter_next(model2,
 								 child2);
 				gtk_tree_store_remove(tree2, &tmp);
 				if (!valid)
-					return;	// next parent
+					return;		/* next parent */
 				else
-					goto reparse;	// next child
+					goto reparse;	/* next child */
 			} else
 				continue;
 		}
@@ -1464,17 +1423,19 @@ static void display_tree(struct menu *menu)
 		    && (tree == tree2))
 			continue;
 
-		if (menu_is_visible(child) || show_all)
+		if ((opt_mode == OPT_NORMAL && menu_is_visible(child)) ||
+		    (opt_mode == OPT_PROMPT && menu_has_prompt(child)) ||
+		    (opt_mode == OPT_ALL))
 			place_node(child, fill_row(child));
 #ifdef DEBUG
 		printf("%*c%s: ", indent, ' ', menu_get_prompt(child));
 		printf("%s", child->flags & MENU_ROOT ? "rootmenu | " : "");
-		dbg_print_ptype(ptype);
+		printf("%s", prop_get_type_name(ptype));
 		printf(" | ");
 		if (sym) {
-			dbg_print_stype(sym->type);
+			printf("%s", sym_type_name(sym->type));
 			printf(" | ");
-			dbg_print_flags(sym->flags);
+			printf("%s", dbg_sym_flags(sym->flags));
 			printf("\n");
 		} else
 			printf("\n");
diff --git a/scripts/kconfig/gconf.glade b/scripts/kconfig/gconf.glade
index b1c86c19292..d52b0a75d82 100644
--- a/scripts/kconfig/gconf.glade
+++ b/scripts/kconfig/gconf.glade
@@ -190,26 +190,40 @@
 		  </child>
 
 		  <child>
-		    <widget class="GtkCheckMenuItem" id="show_all_options1">
+		    <widget class="GtkRadioMenuItem" id="set_option_mode1">
+		      <property name="visible">True</property>
+		      <property name="tooltip" translatable="yes">Show normal options</property>
+		      <property name="label" translatable="yes">Show normal options</property>
+		      <property name="use_underline">True</property>
+		      <property name="active">True</property>
+		      <signal name="activate" handler="on_set_option_mode1_activate"/>
+		    </widget>
+		  </child>
+
+		  <child>
+		    <widget class="GtkRadioMenuItem" id="set_option_mode2">
 		      <property name="visible">True</property>
 		      <property name="tooltip" translatable="yes">Show all options</property>
 		      <property name="label" translatable="yes">Show all _options</property>
 		      <property name="use_underline">True</property>
 		      <property name="active">False</property>
-		      <signal name="activate" handler="on_show_all_options1_activate"/>
+		      <property name="group">set_option_mode1</property>
+		      <signal name="activate" handler="on_set_option_mode2_activate"/>
 		    </widget>
 		  </child>
 
 		  <child>
-		    <widget class="GtkCheckMenuItem" id="show_debug_info1">
+		    <widget class="GtkRadioMenuItem" id="set_option_mode3">
 		      <property name="visible">True</property>
-		      <property name="tooltip" translatable="yes">Show masked options</property>
-		      <property name="label" translatable="yes">Show _debug info</property>
+		      <property name="tooltip" translatable="yes">Show all options with prompts</property>
+		      <property name="label" translatable="yes">Show all prompt options</property>
 		      <property name="use_underline">True</property>
 		      <property name="active">False</property>
-		      <signal name="activate" handler="on_show_debug_info1_activate"/>
+		      <property name="group">set_option_mode1</property>
+		      <signal name="activate" handler="on_set_option_mode3_activate"/>
 		    </widget>
 		  </child>
+
 		</widget>
 	      </child>
 	    </widget>
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index f379b0bf8c9..ce6549cdacc 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -84,7 +84,7 @@ void conf_set_all_new_symbols(enum conf_def_mode mode);
 void kconfig_load(void);
 
 /* menu.c */
-void menu_init(void);
+void _menu_init(void);
 void menu_warn(struct menu *menu, const char *fmt, ...);
 struct menu *menu_add_menu(void);
 void menu_end_menu(void);
@@ -106,6 +106,11 @@ int file_write_dep(const char *name);
 struct gstr {
 	size_t len;
 	char  *s;
+	/*
+	* when max_width is not zero long lines in string s (if any) get
+	* wrapped not to exceed the max_width value
+	*/
+	int max_width;
 };
 struct gstr str_new(void);
 struct gstr str_assign(const char *s);
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index ffeb532b2cf..7cadcad8233 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -11,13 +11,15 @@ P(conf_set_changed_callback, void,(void (*fn)(void)));
 /* menu.c */
 P(rootmenu,struct menu,);
 
-P(menu_is_visible,bool,(struct menu *menu));
+P(menu_is_visible, bool, (struct menu *menu));
+P(menu_has_prompt, bool, (struct menu *menu));
 P(menu_get_prompt,const char *,(struct menu *menu));
 P(menu_get_root_menu,struct menu *,(struct menu *menu));
 P(menu_get_parent_menu,struct menu *,(struct menu *menu));
 P(menu_has_help,bool,(struct menu *menu));
 P(menu_get_help,const char *,(struct menu *menu));
-P(get_symbol_str,void,(struct gstr *r, struct symbol *sym));
+P(get_symbol_str, void, (struct gstr *r, struct symbol *sym));
+P(get_relations_str, struct gstr, (struct symbol **sym_arr));
 P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
 
 /* symbol.c */
diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c
index 616c6013818..dd8e587c50e 100644
--- a/scripts/kconfig/lxdialog/inputbox.c
+++ b/scripts/kconfig/lxdialog/inputbox.c
@@ -180,7 +180,7 @@ do_resize:
 		case KEY_LEFT:
 			switch (button) {
 			case -1:
-				button = 1;	/* Indicates "Cancel" button is selected */
+				button = 1;	/* Indicates "Help" button is selected */
 				print_buttons(dialog, height, width, 1);
 				break;
 			case 0:
@@ -204,7 +204,7 @@ do_resize:
 				print_buttons(dialog, height, width, 0);
 				break;
 			case 0:
-				button = 1;	/* Indicates "Cancel" button is selected */
+				button = 1;	/* Indicates "Help" button is selected */
 				print_buttons(dialog, height, width, 1);
 				break;
 			case 1:
diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c
index fa9d633f293..1d604738fa1 100644
--- a/scripts/kconfig/lxdialog/menubox.c
+++ b/scripts/kconfig/lxdialog/menubox.c
@@ -383,6 +383,10 @@ do_resize:
 		case 'n':
 		case 'm':
 		case '/':
+		case 'h':
+		case '?':
+		case 'z':
+		case '\n':
 			/* save scroll info */
 			*s_scroll = scroll;
 			delwin(menu);
@@ -390,8 +394,10 @@ do_resize:
 			item_set(scroll + choice);
 			item_set_selected(1);
 			switch (key) {
+			case 'h':
+			case '?':
+				return 2;
 			case 's':
-				return 3;
 			case 'y':
 				return 3;
 			case 'n':
@@ -402,18 +408,12 @@ do_resize:
 				return 6;
 			case '/':
 				return 7;
+			case 'z':
+				return 8;
+			case '\n':
+				return button;
 			}
 			return 0;
-		case 'h':
-		case '?':
-			button = 2;
-		case '\n':
-			*s_scroll = scroll;
-			delwin(menu);
-			delwin(dialog);
-			item_set(scroll + choice);
-			item_set_selected(1);
-			return button;
 		case 'e':
 		case 'x':
 			key = KEY_ESC;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 8413cf38ed2..2c83d3234d3 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -67,13 +67,15 @@ static const char mconf_readme[] = N_(
 "             there is a delayed response which you may find annoying.\n"
 "\n"
 "   Also, the <TAB> and cursor keys will cycle between <Select>,\n"
-"   <Exit> and <Help>\n"
+"   <Exit> and <Help>.\n"
 "\n"
 "o  To get help with an item, use the cursor keys to highlight <Help>\n"
-"   and Press <ENTER>.\n"
+"   and press <ENTER>.\n"
 "\n"
 "   Shortcut: Press <H> or <?>.\n"
 "\n"
+"o  To show hidden options, press <Z>.\n"
+"\n"
 "\n"
 "Radiolists  (Choice lists)\n"
 "-----------\n"
@@ -272,6 +274,7 @@ static int indent;
 static struct menu *current_menu;
 static int child_count;
 static int single_menu_mode;
+static int show_all_options;
 
 static void conf(struct menu *menu);
 static void conf_choice(struct menu *menu);
@@ -282,19 +285,6 @@ static void show_textbox(const char *title, const char *text, int r, int c);
 static void show_helptext(const char *title, const char *text);
 static void show_help(struct menu *menu);
 
-static struct gstr get_relations_str(struct symbol **sym_arr)
-{
-	struct symbol *sym;
-	struct gstr res = str_new();
-	int i;
-
-	for (i = 0; sym_arr && (sym = sym_arr[i]); i++)
-		get_symbol_str(&res, sym);
-	if (!i)
-		str_append(&res, _("No matches found.\n"));
-	return res;
-}
-
 static char filename[PATH_MAX+1];
 static void set_config_filename(const char *config_filename)
 {
@@ -359,8 +349,16 @@ static void build_conf(struct menu *menu)
 	int type, tmp, doint = 2;
 	tristate val;
 	char ch;
-
-	if (!menu_is_visible(menu))
+	bool visible;
+
+	/*
+	 * note: menu_is_visible() has side effect that it will
+	 * recalc the value of the symbol.
+	 */
+	visible = menu_is_visible(menu);
+	if (show_all_options && !menu_has_prompt(menu))
+		return;
+	else if (!show_all_options && !visible)
 		return;
 
 	sym = menu->sym;
@@ -619,6 +617,9 @@ static void conf(struct menu *menu)
 		case 7:
 			search_conf();
 			break;
+		case 8:
+			show_all_options = !show_all_options;
+			break;
 		}
 	}
 }
@@ -638,6 +639,7 @@ static void show_help(struct menu *menu)
 {
 	struct gstr help = str_new();
 
+	help.max_width = getmaxx(stdscr) - 10;
 	menu_get_ext_help(menu, &help);
 
 	show_helptext(_(menu_get_prompt(menu)), str_get(&help));
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 059a2465c57..203632cc30b 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -38,7 +38,7 @@ static void prop_warn(struct property *prop, const char *fmt, ...)
 	va_end(ap);
 }
 
-void menu_init(void)
+void _menu_init(void)
 {
 	current_entry = current_menu = &rootmenu;
 	last_entry_ptr = &rootmenu.list;
@@ -197,7 +197,7 @@ static void sym_check_prop(struct symbol *sym)
 			if ((sym->type == S_STRING || sym->type == S_INT || sym->type == S_HEX) &&
 			    prop->expr->type != E_SYMBOL)
 				prop_warn(prop,
-				    "default for config symbol '%'"
+				    "default for config symbol '%s'"
 				    " must be a single symbol", sym->name);
 			break;
 		case P_SELECT:
@@ -390,6 +390,13 @@ void menu_finalize(struct menu *parent)
 	}
 }
 
+bool menu_has_prompt(struct menu *menu)
+{
+	if (!menu->prompt)
+		return false;
+	return true;
+}
+
 bool menu_is_visible(struct menu *menu)
 {
 	struct menu *child;
@@ -398,6 +405,7 @@ bool menu_is_visible(struct menu *menu)
 
 	if (!menu->prompt)
 		return false;
+
 	sym = menu->sym;
 	if (sym) {
 		sym_calc_value(sym);
@@ -407,12 +415,14 @@ bool menu_is_visible(struct menu *menu)
 
 	if (visible != no)
 		return true;
+
 	if (!sym || sym_get_tristate_value(menu->sym) == no)
 		return false;
 
 	for (child = menu->list; child; child = child->next)
 		if (menu_is_visible(child))
 			return true;
+
 	return false;
 }
 
@@ -515,6 +525,20 @@ void get_symbol_str(struct gstr *r, struct symbol *sym)
 	str_append(r, "\n\n");
 }
 
+struct gstr get_relations_str(struct symbol **sym_arr)
+{
+	struct symbol *sym;
+	struct gstr res = str_new();
+	int i;
+
+	for (i = 0; sym_arr && (sym = sym_arr[i]); i++)
+		get_symbol_str(&res, sym);
+	if (!i)
+		str_append(&res, _("No matches found.\n"));
+	return res;
+}
+
+
 void menu_get_ext_help(struct menu *menu, struct gstr *help)
 {
 	struct symbol *sym = menu->sym;
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
new file mode 100644
index 00000000000..762caf80ce3
--- /dev/null
+++ b/scripts/kconfig/nconf.c
@@ -0,0 +1,1568 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+#include "nconf.h"
+
+static const char nconf_readme[] = N_(
+"Overview\n"
+"--------\n"
+"Some kernel features may be built directly into the kernel.\n"
+"Some may be made into loadable runtime modules.  Some features\n"
+"may be completely removed altogether.  There are also certain\n"
+"kernel parameters which are not really features, but must be\n"
+"entered in as decimal or hexadecimal numbers or possibly text.\n"
+"\n"
+"Menu items beginning with following braces represent features that\n"
+"  [ ] can be built in or removed\n"
+"  < > can be built in, modularized or removed\n"
+"  { } can be built in or modularized (selected by other feature)\n"
+"  - - are selected by other feature,\n"
+"  XXX cannot be selected. use Symbol Info to find out why,\n"
+"while *, M or whitespace inside braces means to build in, build as\n"
+"a module or to exclude the feature respectively.\n"
+"\n"
+"To change any of these features, highlight it with the cursor\n"
+"keys and press <Y> to build it in, <M> to make it a module or\n"
+"<N> to removed it.  You may also press the <Space Bar> to cycle\n"
+"through the available options (ie. Y->N->M->Y).\n"
+"\n"
+"Some additional keyboard hints:\n"
+"\n"
+"Menus\n"
+"----------\n"
+"o  Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
+"   you wish to change use <Enter> or <Space>. Goto submenu by \n"
+"   pressing <Enter> of <right-arrow>. Use <Esc> or <left-arrow> to go back.\n"
+"   Submenus are designated by \"--->\".\n"
+"\n"
+"   Shortcut: Press the option's highlighted letter (hotkey).\n"
+"             Pressing a hotkey more than once will sequence\n"
+"             through all visible items which use that hotkey.\n"
+"\n"
+"   You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n"
+"   unseen options into view.\n"
+"\n"
+"o  To exit a menu use the just press <ESC> <F5> <F8> or <left-arrow>.\n"
+"\n"
+"o  To get help with an item, press <F1>\n"
+"   Shortcut: Press <h> or <?>.\n"
+"\n"
+"\n"
+"Radiolists  (Choice lists)\n"
+"-----------\n"
+"o  Use the cursor keys to select the option you wish to set and press\n"
+"   <S> or the <SPACE BAR>.\n"
+"\n"
+"   Shortcut: Press the first letter of the option you wish to set then\n"
+"             press <S> or <SPACE BAR>.\n"
+"\n"
+"o  To see available help for the item, press <F1>\n"
+"   Shortcut: Press <H> or <?>.\n"
+"\n"
+"\n"
+"Data Entry\n"
+"-----------\n"
+"o  Enter the requested information and press <ENTER>\n"
+"   If you are entering hexadecimal values, it is not necessary to\n"
+"   add the '0x' prefix to the entry.\n"
+"\n"
+"o  For help, press <F1>.\n"
+"\n"
+"\n"
+"Text Box    (Help Window)\n"
+"--------\n"
+"o  Use the cursor keys to scroll up/down/left/right.  The VI editor\n"
+"   keys h,j,k,l function here as do <SPACE BAR> for those\n"
+"   who are familiar with less and lynx.\n"
+"\n"
+"o  Press <Enter>, <F1>, <F5>, <F7> or <Esc> to exit.\n"
+"\n"
+"\n"
+"Alternate Configuration Files\n"
+"-----------------------------\n"
+"nconfig supports the use of alternate configuration files for\n"
+"those who, for various reasons, find it necessary to switch\n"
+"between different kernel configurations.\n"
+"\n"
+"At the end of the main menu you will find two options.  One is\n"
+"for saving the current configuration to a file of your choosing.\n"
+"The other option is for loading a previously saved alternate\n"
+"configuration.\n"
+"\n"
+"Even if you don't use alternate configuration files, but you\n"
+"find during a nconfig session that you have completely messed\n"
+"up your settings, you may use the \"Load Alternate...\" option to\n"
+"restore your previously saved settings from \".config\" without\n"
+"restarting nconfig.\n"
+"\n"
+"Other information\n"
+"-----------------\n"
+"If you use nconfig in an XTERM window make sure you have your\n"
+"$TERM variable set to point to a xterm definition which supports color.\n"
+"Otherwise, nconfig will look rather bad.  nconfig will not\n"
+"display correctly in a RXVT window because rxvt displays only one\n"
+"intensity of color, bright.\n"
+"\n"
+"nconfig will display larger menus on screens or xterms which are\n"
+"set to display more than the standard 25 row by 80 column geometry.\n"
+"In order for this to work, the \"stty size\" command must be able to\n"
+"display the screen's current row and column geometry.  I STRONGLY\n"
+"RECOMMEND that you make sure you do NOT have the shell variables\n"
+"LINES and COLUMNS exported into your environment.  Some distributions\n"
+"export those variables via /etc/profile.  Some ncurses programs can\n"
+"become confused when those variables (LINES & COLUMNS) don't reflect\n"
+"the true screen size.\n"
+"\n"
+"Optional personality available\n"
+"------------------------------\n"
+"If you prefer to have all of the kernel options listed in a single\n"
+"menu, rather than the default multimenu hierarchy, run the nconfig\n"
+"with NCONFIG_MODE environment variable set to single_menu. Example:\n"
+"\n"
+"make NCONFIG_MODE=single_menu nconfig\n"
+"\n"
+"<Enter> will then unroll the appropriate category, or enfold it if it\n"
+"is already unrolled.\n"
+"\n"
+"Note that this mode can eventually be a little more CPU expensive\n"
+"(especially with a larger number of unrolled categories) than the\n"
+"default mode.\n"
+"\n"),
+menu_no_f_instructions[] = N_(
+" You do not have function keys support. Please follow the\n"
+" following instructions:\n"
+" Arrow keys navigate the menu.\n"
+" <Enter> or <right-arrow> selects submenus --->.\n"
+" Capital Letters are hotkeys.\n"
+" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
+" Pressing SpaceBar toggles between the above options\n"
+" Press <Esc> or <left-arrow> to go back one menu, \n"
+" <?> or <h> for Help, </> for Search.\n"
+" <1> is interchangable with <F1>, <2> with <F2>, etc.\n"
+" Legend: [*] built-in  [ ] excluded  <M> module  < > module capable.\n"
+" <Esc> always leaves the current window\n"),
+menu_instructions[] = N_(
+" Arrow keys navigate the menu.\n"
+" <Enter> or <right-arrow> selects submenus --->.\n"
+" Capital Letters are hotkeys.\n"
+" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
+" Pressing SpaceBar toggles between the above options\n"
+" Press <Esc>, <F3> or <left-arrow> to go back one menu, \n"
+" <?>, <F1> or <h> for Help, </> for Search.\n"
+" <1> is interchangable with <F1>, <2> with <F2>, etc.\n"
+" Legend: [*] built-in  [ ] excluded  <M> module  < > module capable.\n"
+" <Esc> always leaves the current window\n"),
+radiolist_instructions[] = N_(
+" Use the arrow keys to navigate this window or\n"
+" press the hotkey of the item you wish to select\n"
+" followed by the <SPACE BAR>.\n"
+" Press <?>, <F1> or <h> for additional information about this option.\n"),
+inputbox_instructions_int[] = N_(
+"Please enter a decimal value.\n"
+"Fractions will not be accepted.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+inputbox_instructions_hex[] = N_(
+"Please enter a hexadecimal value.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+inputbox_instructions_string[] = N_(
+"Please enter a string value.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+setmod_text[] = N_(
+"This feature depends on another which\n"
+"has been configured as a module.\n"
+"As a result, this feature will be built as a module."),
+nohelp_text[] = N_(
+"There is no help available for this kernel option.\n"),
+load_config_text[] = N_(
+"Enter the name of the configuration file you wish to load.\n"
+"Accept the name shown to restore the configuration you\n"
+"last retrieved.  Leave blank to abort."),
+load_config_help[] = N_(
+"\n"
+"For various reasons, one may wish to keep several different kernel\n"
+"configurations available on a single machine.\n"
+"\n"
+"If you have saved a previous configuration in a file other than the\n"
+"kernel's default, entering the name of the file here will allow you\n"
+"to modify that configuration.\n"
+"\n"
+"If you are uncertain, then you have probably never used alternate\n"
+"configuration files.  You should therefor leave this blank to abort.\n"),
+save_config_text[] = N_(
+"Enter a filename to which this configuration should be saved\n"
+"as an alternate.  Leave blank to abort."),
+save_config_help[] = N_(
+"\n"
+"For various reasons, one may wish to keep different kernel\n"
+"configurations available on a single machine.\n"
+"\n"
+"Entering a file name here will allow you to later retrieve, modify\n"
+"and use the current configuration as an alternate to whatever\n"
+"configuration options you have selected at that time.\n"
+"\n"
+"If you are uncertain what all this means then you should probably\n"
+"leave this blank.\n"),
+search_help[] = N_(
+"\n"
+"Search for CONFIG_ symbols and display their relations.\n"
+"Regular expressions are allowed.\n"
+"Example: search for \"^FOO\"\n"
+"Result:\n"
+"-----------------------------------------------------------------\n"
+"Symbol: FOO [ = m]\n"
+"Prompt: Foo bus is used to drive the bar HW\n"
+"Defined at drivers/pci/Kconfig:47\n"
+"Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
+"Location:\n"
+"  -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n"
+"    -> PCI support (PCI [ = y])\n"
+"      -> PCI access mode (<choice> [ = y])\n"
+"Selects: LIBCRC32\n"
+"Selected by: BAR\n"
+"-----------------------------------------------------------------\n"
+"o The line 'Prompt:' shows the text used in the menu structure for\n"
+"  this CONFIG_ symbol\n"
+"o The 'Defined at' line tell at what file / line number the symbol\n"
+"  is defined\n"
+"o The 'Depends on:' line tell what symbols needs to be defined for\n"
+"  this symbol to be visible in the menu (selectable)\n"
+"o The 'Location:' lines tell where in the menu structure this symbol\n"
+"  is located\n"
+"    A location followed by a [ = y] indicate that this is a selectable\n"
+"    menu item - and current value is displayed inside brackets.\n"
+"o The 'Selects:' line tell what symbol will be automatically\n"
+"  selected if this symbol is selected (y or m)\n"
+"o The 'Selected by' line tell what symbol has selected this symbol\n"
+"\n"
+"Only relevant lines are shown.\n"
+"\n\n"
+"Search examples:\n"
+"Examples: USB   = > find all CONFIG_ symbols containing USB\n"
+"          ^USB => find all CONFIG_ symbols starting with USB\n"
+"          USB$ => find all CONFIG_ symbols ending with USB\n"
+"\n");
+
+struct mitem {
+	char str[256];
+	char tag;
+	void *usrptr;
+	int is_hot;
+	int is_visible;
+};
+
+#define MAX_MENU_ITEMS 4096
+static int show_all_items;
+static int indent;
+static struct menu *current_menu;
+static int child_count;
+static int single_menu_mode;
+/* the window in which all information appears */
+static WINDOW *main_window;
+/* the largest size of the menu window */
+static int mwin_max_lines;
+static int mwin_max_cols;
+/* the window in which we show option buttons */
+static MENU *curses_menu;
+static ITEM *curses_menu_items[MAX_MENU_ITEMS];
+static struct mitem k_menu_items[MAX_MENU_ITEMS];
+static int items_num;
+static int global_exit;
+/* the currently selected button */
+const char *current_instructions = menu_instructions;
+/* this array is used to implement hot keys. it is updated in item_make and
+ * resetted in clean_items. It would be better to use a hash, but lets keep it
+ * simple... */
+#define MAX_SAME_KEY MAX_MENU_ITEMS
+struct {
+	int count;
+	int ptrs[MAX_MENU_ITEMS];
+} hotkeys[1<<(sizeof(char)*8)];
+
+static void conf(struct menu *menu);
+static void conf_choice(struct menu *menu);
+static void conf_string(struct menu *menu);
+static void conf_load(void);
+static void conf_save(void);
+static void show_help(struct menu *menu);
+static int do_exit(void);
+static void setup_windows(void);
+
+typedef void (*function_key_handler_t)(int *key, struct menu *menu);
+static void handle_f1(int *key, struct menu *current_item);
+static void handle_f2(int *key, struct menu *current_item);
+static void handle_f3(int *key, struct menu *current_item);
+static void handle_f4(int *key, struct menu *current_item);
+static void handle_f5(int *key, struct menu *current_item);
+static void handle_f6(int *key, struct menu *current_item);
+static void handle_f7(int *key, struct menu *current_item);
+static void handle_f8(int *key, struct menu *current_item);
+
+struct function_keys {
+	const char *key_str;
+	const char *func;
+	function_key key;
+	function_key_handler_t handler;
+};
+
+static const int function_keys_num = 8;
+struct function_keys function_keys[] = {
+	{
+		.key_str = "F1",
+		.func = "Help",
+		.key = F_HELP,
+		.handler = handle_f1,
+	},
+	{
+		.key_str = "F2",
+		.func = "Symbol Info",
+		.key = F_SYMBOL,
+		.handler = handle_f2,
+	},
+	{
+		.key_str = "F3",
+		.func = "Instructions",
+		.key = F_INSTS,
+		.handler = handle_f3,
+	},
+	{
+		.key_str = "F4",
+		.func = "Config",
+		.key = F_CONF,
+		.handler = handle_f4,
+	},
+	{
+		.key_str = "F5",
+		.func = "Back",
+		.key = F_BACK,
+		.handler = handle_f5,
+	},
+	{
+		.key_str = "F6",
+		.func = "Save",
+		.key = F_SAVE,
+		.handler = handle_f6,
+	},
+	{
+		.key_str = "F7",
+		.func = "Load",
+		.key = F_LOAD,
+		.handler = handle_f7,
+	},
+	{
+		.key_str = "F8",
+		.func = "Exit",
+		.key = F_EXIT,
+		.handler = handle_f8,
+	},
+};
+
+static void print_function_line(void)
+{
+	int i;
+	int offset = 1;
+	const int skip = 1;
+
+	for (i = 0; i < function_keys_num; i++) {
+		wattrset(main_window, attributes[FUNCTION_HIGHLIGHT]);
+		mvwprintw(main_window, LINES-3, offset,
+				"%s",
+				function_keys[i].key_str);
+		wattrset(main_window, attributes[FUNCTION_TEXT]);
+		offset += strlen(function_keys[i].key_str);
+		mvwprintw(main_window, LINES-3,
+				offset, "%s",
+				function_keys[i].func);
+		offset += strlen(function_keys[i].func) + skip;
+	}
+	wattrset(main_window, attributes[NORMAL]);
+}
+
+/* help */
+static void handle_f1(int *key, struct menu *current_item)
+{
+	show_scroll_win(main_window,
+			_("README"), _(nconf_readme));
+	return;
+}
+
+/* symbole help */
+static void handle_f2(int *key, struct menu *current_item)
+{
+	show_help(current_item);
+	return;
+}
+
+/* instructions */
+static void handle_f3(int *key, struct menu *current_item)
+{
+	show_scroll_win(main_window,
+			_("Instructions"),
+			_(current_instructions));
+	return;
+}
+
+/* config */
+static void handle_f4(int *key, struct menu *current_item)
+{
+	int res = btn_dialog(main_window,
+			_("Show all symbols?"),
+			2,
+			"   <Show All>   ",
+			"<Don't show all>");
+	if (res == 0)
+		show_all_items = 1;
+	else if (res == 1)
+		show_all_items = 0;
+
+	return;
+}
+
+/* back */
+static void handle_f5(int *key, struct menu *current_item)
+{
+	*key = KEY_LEFT;
+	return;
+}
+
+/* save */
+static void handle_f6(int *key, struct menu *current_item)
+{
+	conf_save();
+	return;
+}
+
+/* load */
+static void handle_f7(int *key, struct menu *current_item)
+{
+	conf_load();
+	return;
+}
+
+/* exit */
+static void handle_f8(int *key, struct menu *current_item)
+{
+	do_exit();
+	return;
+}
+
+/* return != 0 to indicate the key was handles */
+static int process_special_keys(int *key, struct menu *menu)
+{
+	int i;
+
+	if (*key == KEY_RESIZE) {
+		setup_windows();
+		return 1;
+	}
+
+	for (i = 0; i < function_keys_num; i++) {
+		if (*key == KEY_F(function_keys[i].key) ||
+		    *key == '0' + function_keys[i].key){
+			function_keys[i].handler(key, menu);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void clean_items(void)
+{
+	int i;
+	for (i = 0; curses_menu_items[i]; i++)
+		free_item(curses_menu_items[i]);
+	bzero(curses_menu_items, sizeof(curses_menu_items));
+	bzero(k_menu_items, sizeof(k_menu_items));
+	bzero(hotkeys, sizeof(hotkeys));
+	items_num = 0;
+}
+
+/* return the index of the next hot item, or -1 if no such item exists */
+static int get_next_hot(int c)
+{
+	static int hot_index;
+	static int hot_char;
+
+	if (c < 0 || c > 255 || hotkeys[c].count <= 0)
+		return -1;
+
+	if (hot_char == c) {
+		hot_index = (hot_index+1)%hotkeys[c].count;
+		return hotkeys[c].ptrs[hot_index];
+	} else {
+		hot_char = c;
+		hot_index = 0;
+		return hotkeys[c].ptrs[0];
+	}
+}
+
+/* can the char c be a hot key? no, if c is a common shortcut used elsewhere */
+static int canbhot(char c)
+{
+	c = tolower(c);
+	return isalnum(c) && c != 'y' && c != 'm' && c != 'h' &&
+		c != 'n' && c != '?';
+}
+
+/* check if str already contains a hot key. */
+static int is_hot(int index)
+{
+	return k_menu_items[index].is_hot;
+}
+
+/* find the first possible hot key, and mark it.
+ * index is the index of the item in the menu
+ * return 0 on success*/
+static int make_hot(char *dest, int len, const char *org, int index)
+{
+	int position = -1;
+	int i;
+	int tmp;
+	int c;
+	int org_len = strlen(org);
+
+	if (org == NULL || is_hot(index))
+		return 1;
+
+	/* make sure not to make hot keys out of markers.
+	 * find where to start looking for a hot key
+	 */
+	i = 0;
+	/* skip white space */
+	while (i < org_len && org[i] == ' ')
+		i++;
+	if (i == org_len)
+		return -1;
+	/* if encountering '(' or '<' or '[', find the match and look from there
+	 **/
+	if (org[i] == '[' || org[i] == '<' || org[i] == '(') {
+		i++;
+		for (; i < org_len; i++)
+			if (org[i] == ']' || org[i] == '>' || org[i] == ')')
+				break;
+	}
+	if (i == org_len)
+		return -1;
+	for (; i < org_len; i++) {
+		if (canbhot(org[i]) && org[i-1] != '<' && org[i-1] != '(') {
+			position = i;
+			break;
+		}
+	}
+	if (position == -1)
+		return 1;
+
+	/* ok, char at org[position] should be a hot key to this item */
+	c = tolower(org[position]);
+	tmp = hotkeys[c].count;
+	hotkeys[c].ptrs[tmp] = index;
+	hotkeys[c].count++;
+	/*
+	   snprintf(dest, len, "%.*s(%c)%s", position, org, org[position],
+	   &org[position+1]);
+	   */
+	/* make org[position] uppercase, and all leading letter small case */
+	strncpy(dest, org, len);
+	for (i = 0; i < position; i++)
+		dest[i] = tolower(dest[i]);
+	dest[position] = toupper(dest[position]);
+	k_menu_items[index].is_hot = 1;
+	return 0;
+}
+
+/* Make a new item. Add a hotkey mark in the first possible letter.
+ * As ncurses does not allow any attributes inside menue item, we mark the
+ * hot key as the first capitalized letter in the string */
+static void item_make(struct menu *menu, char tag, const char *fmt, ...)
+{
+	va_list ap;
+	char tmp_str[256];
+
+	if (items_num > MAX_MENU_ITEMS-1)
+		return;
+
+	bzero(&k_menu_items[items_num], sizeof(k_menu_items[0]));
+	k_menu_items[items_num].tag = tag;
+	k_menu_items[items_num].usrptr = menu;
+	if (menu != NULL)
+		k_menu_items[items_num].is_visible =
+			menu_is_visible(menu);
+	else
+		k_menu_items[items_num].is_visible = 1;
+
+	va_start(ap, fmt);
+	vsnprintf(tmp_str, sizeof(tmp_str), fmt, ap);
+	if (!k_menu_items[items_num].is_visible)
+		memcpy(tmp_str, "XXX", 3);
+	va_end(ap);
+	if (make_hot(
+		k_menu_items[items_num].str,
+		sizeof(k_menu_items[items_num].str), tmp_str, items_num) != 0)
+		strncpy(k_menu_items[items_num].str,
+			tmp_str,
+			sizeof(k_menu_items[items_num].str));
+
+	curses_menu_items[items_num] = new_item(
+			k_menu_items[items_num].str,
+			k_menu_items[items_num].str);
+	set_item_userptr(curses_menu_items[items_num],
+			&k_menu_items[items_num]);
+	/*
+	if (!k_menu_items[items_num].is_visible)
+		item_opts_off(curses_menu_items[items_num], O_SELECTABLE);
+	*/
+
+	items_num++;
+	curses_menu_items[items_num] = NULL;
+}
+
+/* very hackish. adds a string to the last item added */
+static void item_add_str(const char *fmt, ...)
+{
+	va_list ap;
+	int index = items_num-1;
+	char new_str[256];
+	char tmp_str[256];
+
+	if (index < 0)
+		return;
+
+	va_start(ap, fmt);
+	vsnprintf(new_str, sizeof(new_str), fmt, ap);
+	va_end(ap);
+	snprintf(tmp_str, sizeof(tmp_str), "%s%s",
+			k_menu_items[index].str, new_str);
+	if (make_hot(k_menu_items[index].str,
+			sizeof(k_menu_items[index].str), tmp_str, index) != 0)
+		strncpy(k_menu_items[index].str,
+			tmp_str,
+			sizeof(k_menu_items[index].str));
+
+	free_item(curses_menu_items[index]);
+	curses_menu_items[index] = new_item(
+			k_menu_items[index].str,
+			k_menu_items[index].str);
+	set_item_userptr(curses_menu_items[index],
+			&k_menu_items[index]);
+}
+
+/* get the tag of the currently selected item */
+static char item_tag(void)
+{
+	ITEM *cur;
+	struct mitem *mcur;
+
+	cur = current_item(curses_menu);
+	if (cur == NULL)
+		return 0;
+	mcur = (struct mitem *) item_userptr(cur);
+	return mcur->tag;
+}
+
+static int curses_item_index(void)
+{
+	return  item_index(current_item(curses_menu));
+}
+
+static void *item_data(void)
+{
+	ITEM *cur;
+	struct mitem *mcur;
+
+	cur = current_item(curses_menu);
+	mcur = (struct mitem *) item_userptr(cur);
+	return mcur->usrptr;
+
+}
+
+static int item_is_tag(char tag)
+{
+	return item_tag() == tag;
+}
+
+static char filename[PATH_MAX+1];
+static char menu_backtitle[PATH_MAX+128];
+static const char *set_config_filename(const char *config_filename)
+{
+	int size;
+	struct symbol *sym;
+
+	sym = sym_lookup("KERNELVERSION", 0);
+	sym_calc_value(sym);
+	size = snprintf(menu_backtitle, sizeof(menu_backtitle),
+			_("%s - Linux Kernel v%s Configuration"),
+			config_filename, sym_get_string_value(sym));
+	if (size >= sizeof(menu_backtitle))
+		menu_backtitle[sizeof(menu_backtitle)-1] = '\0';
+
+	size = snprintf(filename, sizeof(filename), "%s", config_filename);
+	if (size >= sizeof(filename))
+		filename[sizeof(filename)-1] = '\0';
+	return menu_backtitle;
+}
+
+/* command = 0 is supress, 1 is restore */
+static void supress_stdout(int command)
+{
+	static FILE *org_stdout;
+	static FILE *org_stderr;
+
+	if (command == 0) {
+		org_stdout = stdout;
+		org_stderr = stderr;
+		stdout = fopen("/dev/null", "a");
+		stderr = fopen("/dev/null", "a");
+	} else {
+		fclose(stdout);
+		fclose(stderr);
+		stdout = org_stdout;
+		stderr = org_stderr;
+	}
+}
+
+/* return = 0 means we are successful.
+ * -1 means go on doing what you were doing
+ */
+static int do_exit(void)
+{
+	int res;
+	if (!conf_get_changed()) {
+		global_exit = 1;
+		return 0;
+	}
+	res = btn_dialog(main_window,
+			_("Do you wish to save your "
+				"new kernel configuration?\n"
+				"<ESC> to cancel and resume nconfig."),
+			2,
+			"   <save>   ",
+			"<don't save>");
+	if (res == KEY_EXIT) {
+		global_exit = 0;
+		return -1;
+	}
+
+	/* if we got here, the user really wants to exit */
+	switch (res) {
+	case 0:
+		supress_stdout(0);
+		res = conf_write(filename);
+		supress_stdout(1);
+		if (res)
+			btn_dialog(
+				main_window,
+				_("Error during writing of the kernel "
+				  "configuration.\n"
+				  "Your kernel configuration "
+				  "changes were NOT saved."),
+				  1,
+				  "<OK>");
+		else {
+			char buf[1024];
+			snprintf(buf, 1024,
+				_("Configuration written to %s\n"
+				  "End of Linux kernel configuration.\n"
+				  "Execute 'make' to build the kernel or try"
+				  " 'make help'."), filename);
+			btn_dialog(
+				main_window,
+				buf,
+				1,
+				"<OK>");
+		}
+		break;
+	default:
+		btn_dialog(
+			main_window,
+			_("Your kernel configuration changes were NOT saved."),
+			1,
+			"<OK>");
+		break;
+	}
+	global_exit = 1;
+	return 0;
+}
+
+
+static void search_conf(void)
+{
+	struct symbol **sym_arr;
+	struct gstr res;
+	char dialog_input_result[100];
+	char *dialog_input;
+	int dres;
+again:
+	dres = dialog_inputbox(main_window,
+			_("Search Configuration Parameter"),
+			_("Enter CONFIG_ (sub)string to search for "
+				"(with or without \"CONFIG\")"),
+			"", dialog_input_result, 99);
+	switch (dres) {
+	case 0:
+		break;
+	case 1:
+		show_scroll_win(main_window,
+				_("Search Configuration"), search_help);
+		goto again;
+	default:
+		return;
+	}
+
+	/* strip CONFIG_ if necessary */
+	dialog_input = dialog_input_result;
+	if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0)
+		dialog_input += 7;
+
+	sym_arr = sym_re_search(dialog_input);
+	res = get_relations_str(sym_arr);
+	free(sym_arr);
+	show_scroll_win(main_window,
+			_("Search Results"), str_get(&res));
+	str_free(&res);
+}
+
+
+static void build_conf(struct menu *menu)
+{
+	struct symbol *sym;
+	struct property *prop;
+	struct menu *child;
+	int type, tmp, doint = 2;
+	tristate val;
+	char ch;
+
+	if (!menu || (!show_all_items && !menu_is_visible(menu)))
+		return;
+
+	sym = menu->sym;
+	prop = menu->prompt;
+	if (!sym) {
+		if (prop && menu != current_menu) {
+			const char *prompt = menu_get_prompt(menu);
+			enum prop_type ptype;
+			ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+			switch (ptype) {
+			case P_MENU:
+				child_count++;
+				prompt = _(prompt);
+				if (single_menu_mode) {
+					item_make(menu, 'm',
+						"%s%*c%s",
+						menu->data ? "-->" : "++>",
+						indent + 1, ' ', prompt);
+				} else
+					item_make(menu, 'm',
+						"   %*c%s  --->",
+						indent + 1,
+						' ', prompt);
+
+				if (single_menu_mode && menu->data)
+					goto conf_childs;
+				return;
+			case P_COMMENT:
+				if (prompt) {
+					child_count++;
+					item_make(menu, ':',
+						"   %*c*** %s ***",
+						indent + 1, ' ',
+						_(prompt));
+				}
+				break;
+			default:
+				if (prompt) {
+					child_count++;
+					item_make(menu, ':', "---%*c%s",
+						indent + 1, ' ',
+						_(prompt));
+				}
+			}
+		} else
+			doint = 0;
+		goto conf_childs;
+	}
+
+	type = sym_get_type(sym);
+	if (sym_is_choice(sym)) {
+		struct symbol *def_sym = sym_get_choice_value(sym);
+		struct menu *def_menu = NULL;
+
+		child_count++;
+		for (child = menu->list; child; child = child->next) {
+			if (menu_is_visible(child) && child->sym == def_sym)
+				def_menu = child;
+		}
+
+		val = sym_get_tristate_value(sym);
+		if (sym_is_changable(sym)) {
+			switch (type) {
+			case S_BOOLEAN:
+				item_make(menu, 't', "[%c]",
+						val == no ? ' ' : '*');
+				break;
+			case S_TRISTATE:
+				switch (val) {
+				case yes:
+					ch = '*';
+					break;
+				case mod:
+					ch = 'M';
+					break;
+				default:
+					ch = ' ';
+					break;
+				}
+				item_make(menu, 't', "<%c>", ch);
+				break;
+			}
+		} else {
+			item_make(menu, def_menu ? 't' : ':', "   ");
+		}
+
+		item_add_str("%*c%s", indent + 1,
+				' ', _(menu_get_prompt(menu)));
+		if (val == yes) {
+			if (def_menu) {
+				item_add_str(" (%s)",
+					_(menu_get_prompt(def_menu)));
+				item_add_str("  --->");
+				if (def_menu->list) {
+					indent += 2;
+					build_conf(def_menu);
+					indent -= 2;
+				}
+			}
+			return;
+		}
+	} else {
+		if (menu == current_menu) {
+			item_make(menu, ':',
+				"---%*c%s", indent + 1,
+				' ', _(menu_get_prompt(menu)));
+			goto conf_childs;
+		}
+		child_count++;
+		val = sym_get_tristate_value(sym);
+		if (sym_is_choice_value(sym) && val == yes) {
+			item_make(menu, ':', "   ");
+		} else {
+			switch (type) {
+			case S_BOOLEAN:
+				if (sym_is_changable(sym))
+					item_make(menu, 't', "[%c]",
+						val == no ? ' ' : '*');
+				else
+					item_make(menu, 't', "-%c-",
+						val == no ? ' ' : '*');
+				break;
+			case S_TRISTATE:
+				switch (val) {
+				case yes:
+					ch = '*';
+					break;
+				case mod:
+					ch = 'M';
+					break;
+				default:
+					ch = ' ';
+					break;
+				}
+				if (sym_is_changable(sym)) {
+					if (sym->rev_dep.tri == mod)
+						item_make(menu,
+							't', "{%c}", ch);
+					else
+						item_make(menu,
+							't', "<%c>", ch);
+				} else
+					item_make(menu, 't', "-%c-", ch);
+				break;
+			default:
+				tmp = 2 + strlen(sym_get_string_value(sym));
+				item_make(menu, 's', "    (%s)",
+						sym_get_string_value(sym));
+				tmp = indent - tmp + 4;
+				if (tmp < 0)
+					tmp = 0;
+				item_add_str("%*c%s%s", tmp, ' ',
+						_(menu_get_prompt(menu)),
+						(sym_has_value(sym) ||
+						 !sym_is_changable(sym)) ? "" :
+						_(" (NEW)"));
+				goto conf_childs;
+			}
+		}
+		item_add_str("%*c%s%s", indent + 1, ' ',
+				_(menu_get_prompt(menu)),
+				(sym_has_value(sym) || !sym_is_changable(sym)) ?
+				"" : _(" (NEW)"));
+		if (menu->prompt && menu->prompt->type == P_MENU) {
+			item_add_str("  --->");
+			return;
+		}
+	}
+
+conf_childs:
+	indent += doint;
+	for (child = menu->list; child; child = child->next)
+		build_conf(child);
+	indent -= doint;
+}
+
+static void reset_menu(void)
+{
+	unpost_menu(curses_menu);
+	clean_items();
+}
+
+/* adjust the menu to show this item.
+ * prefer not to scroll the menu if possible*/
+static void center_item(int selected_index, int *last_top_row)
+{
+	int toprow;
+	int maxy, maxx;
+
+	scale_menu(curses_menu, &maxy, &maxx);
+	set_top_row(curses_menu, *last_top_row);
+	toprow = top_row(curses_menu);
+	if (selected_index >= toprow && selected_index < toprow+maxy) {
+		/* we can only move the selected item. no need to scroll */
+		set_current_item(curses_menu,
+				curses_menu_items[selected_index]);
+	} else {
+		toprow = max(selected_index-maxy/2, 0);
+		if (toprow >= item_count(curses_menu)-maxy)
+			toprow = item_count(curses_menu)-mwin_max_lines;
+		set_top_row(curses_menu, toprow);
+		set_current_item(curses_menu,
+				curses_menu_items[selected_index]);
+	}
+	*last_top_row = toprow;
+	post_menu(curses_menu);
+	refresh_all_windows(main_window);
+}
+
+/* this function assumes reset_menu has been called before */
+static void show_menu(const char *prompt, const char *instructions,
+		int selected_index, int *last_top_row)
+{
+	int maxx, maxy;
+	WINDOW *menu_window;
+
+	current_instructions = instructions;
+
+	clear();
+	wattrset(main_window, attributes[NORMAL]);
+	print_in_middle(stdscr, 1, 0, COLS,
+			menu_backtitle,
+			attributes[MAIN_HEADING]);
+
+	wattrset(main_window, attributes[MAIN_MENU_BOX]);
+	box(main_window, 0, 0);
+	wattrset(main_window, attributes[MAIN_MENU_HEADING]);
+	mvwprintw(main_window, 0, 3, " %s ", prompt);
+	wattrset(main_window, attributes[NORMAL]);
+
+	set_menu_items(curses_menu, curses_menu_items);
+
+	/* position the menu at the middle of the screen */
+	scale_menu(curses_menu, &maxy, &maxx);
+	maxx = min(maxx, mwin_max_cols-2);
+	maxy = mwin_max_lines-2;
+	menu_window = derwin(main_window,
+			maxy,
+			maxx,
+			2,
+			(mwin_max_cols-maxx)/2);
+	keypad(menu_window, TRUE);
+	set_menu_win(curses_menu, menu_window);
+	set_menu_sub(curses_menu, menu_window);
+
+	/* must reassert this after changing items, otherwise returns to a
+	 * default of 16
+	 */
+	set_menu_format(curses_menu, maxy, 1);
+	center_item(selected_index, last_top_row);
+	set_menu_format(curses_menu, maxy, 1);
+
+	print_function_line();
+
+	/* Post the menu */
+	post_menu(curses_menu);
+	refresh_all_windows(main_window);
+}
+
+
+static void conf(struct menu *menu)
+{
+	char pattern[256];
+	struct menu *submenu = 0;
+	const char *prompt = menu_get_prompt(menu);
+	struct symbol *sym;
+	struct menu *active_menu = NULL;
+	int res;
+	int current_index = 0;
+	int last_top_row = 0;
+
+	bzero(pattern, sizeof(pattern));
+
+	while (!global_exit) {
+		reset_menu();
+		current_menu = menu;
+		build_conf(menu);
+		if (!child_count)
+			break;
+
+		show_menu(prompt ? _(prompt) : _("Main Menu"),
+				_(menu_instructions),
+				current_index, &last_top_row);
+		keypad((menu_win(curses_menu)), TRUE);
+		while (!global_exit && (res = wgetch(menu_win(curses_menu)))) {
+			if (process_special_keys(&res,
+						(struct menu *) item_data()))
+				break;
+			switch (res) {
+			case KEY_DOWN:
+				menu_driver(curses_menu, REQ_DOWN_ITEM);
+				break;
+			case KEY_UP:
+				menu_driver(curses_menu, REQ_UP_ITEM);
+				break;
+			case KEY_NPAGE:
+				menu_driver(curses_menu, REQ_SCR_DPAGE);
+				break;
+			case KEY_PPAGE:
+				menu_driver(curses_menu, REQ_SCR_UPAGE);
+				break;
+			case KEY_HOME:
+				menu_driver(curses_menu, REQ_FIRST_ITEM);
+				break;
+			case KEY_END:
+				menu_driver(curses_menu, REQ_LAST_ITEM);
+				break;
+			case 'h':
+			case '?':
+				show_help((struct menu *) item_data());
+				break;
+			}
+			if (res == 10 || res == 27 ||
+				res == 32 || res == 'n' || res == 'y' ||
+				res == KEY_LEFT || res == KEY_RIGHT ||
+				res == 'm' || res == '/')
+				break;
+			else if (canbhot(res)) {
+				/* check for hot keys: */
+				int tmp = get_next_hot(res);
+				if (tmp != -1)
+					center_item(tmp, &last_top_row);
+			}
+			refresh_all_windows(main_window);
+		}
+
+		refresh_all_windows(main_window);
+		/* if ESC  or left*/
+		if (res == 27 || (menu != &rootmenu && res == KEY_LEFT))
+			break;
+
+		/* remember location in the menu */
+		last_top_row = top_row(curses_menu);
+		current_index = curses_item_index();
+
+		if (!item_tag())
+			continue;
+
+		submenu = (struct menu *) item_data();
+		active_menu = (struct menu *)item_data();
+		if (!submenu || !menu_is_visible(submenu))
+			continue;
+		if (submenu)
+			sym = submenu->sym;
+		else
+			sym = NULL;
+
+		switch (res) {
+		case ' ':
+			if (item_is_tag('t'))
+				sym_toggle_tristate_value(sym);
+			else if (item_is_tag('m'))
+				conf(submenu);
+			break;
+		case KEY_RIGHT:
+		case 10: /* ENTER WAS PRESSED */
+			switch (item_tag()) {
+			case 'm':
+				if (single_menu_mode)
+					submenu->data =
+						(void *) (long) !submenu->data;
+				else
+					conf(submenu);
+				break;
+			case 't':
+				if (sym_is_choice(sym) &&
+				    sym_get_tristate_value(sym) == yes)
+					conf_choice(submenu);
+				else if (submenu->prompt &&
+					 submenu->prompt->type == P_MENU)
+					conf(submenu);
+				else if (res == 10)
+					sym_toggle_tristate_value(sym);
+				break;
+			case 's':
+				conf_string(submenu);
+				break;
+			}
+			break;
+		case 'y':
+			if (item_is_tag('t')) {
+				if (sym_set_tristate_value(sym, yes))
+					break;
+				if (sym_set_tristate_value(sym, mod))
+					btn_dialog(main_window, setmod_text, 0);
+			}
+			break;
+		case 'n':
+			if (item_is_tag('t'))
+				sym_set_tristate_value(sym, no);
+			break;
+		case 'm':
+			if (item_is_tag('t'))
+				sym_set_tristate_value(sym, mod);
+			break;
+		case '/':
+			search_conf();
+			break;
+		}
+	}
+}
+
+static void show_help(struct menu *menu)
+{
+	struct gstr help = str_new();
+
+	if (menu && menu->sym && menu_has_help(menu)) {
+		if (menu->sym->name) {
+			str_printf(&help, "CONFIG_%s:\n\n", menu->sym->name);
+			str_append(&help, _(menu_get_help(menu)));
+			str_append(&help, "\n");
+			get_symbol_str(&help, menu->sym);
+		}
+	} else {
+		str_append(&help, nohelp_text);
+	}
+	show_scroll_win(main_window, _(menu_get_prompt(menu)), str_get(&help));
+	str_free(&help);
+}
+
+static void conf_choice(struct menu *menu)
+{
+	const char *prompt = _(menu_get_prompt(menu));
+	struct menu *child = 0;
+	struct symbol *active;
+	int selected_index = 0;
+	int last_top_row = 0;
+	int res, i = 0;
+
+	active = sym_get_choice_value(menu->sym);
+	/* this is mostly duplicated from the conf() function. */
+	while (!global_exit) {
+		reset_menu();
+
+		for (i = 0, child = menu->list; child; child = child->next) {
+			if (!show_all_items && !menu_is_visible(child))
+				continue;
+
+			if (child->sym == sym_get_choice_value(menu->sym))
+				item_make(child, ':', "<X> %s",
+						_(menu_get_prompt(child)));
+			else
+				item_make(child, ':', "    %s",
+						_(menu_get_prompt(child)));
+			if (child->sym == active){
+				last_top_row = top_row(curses_menu);
+				selected_index = i;
+			}
+			i++;
+		}
+		show_menu(prompt ? _(prompt) : _("Choice Menu"),
+				_(radiolist_instructions),
+				selected_index,
+				&last_top_row);
+		while (!global_exit && (res = wgetch(menu_win(curses_menu)))) {
+			if (process_special_keys(
+						&res,
+						(struct menu *) item_data()))
+				break;
+			switch (res) {
+			case KEY_DOWN:
+				menu_driver(curses_menu, REQ_DOWN_ITEM);
+				break;
+			case KEY_UP:
+				menu_driver(curses_menu, REQ_UP_ITEM);
+				break;
+			case KEY_NPAGE:
+				menu_driver(curses_menu, REQ_SCR_DPAGE);
+				break;
+			case KEY_PPAGE:
+				menu_driver(curses_menu, REQ_SCR_UPAGE);
+				break;
+			case KEY_HOME:
+				menu_driver(curses_menu, REQ_FIRST_ITEM);
+				break;
+			case KEY_END:
+				menu_driver(curses_menu, REQ_LAST_ITEM);
+				break;
+			case 'h':
+			case '?':
+				show_help((struct menu *) item_data());
+				break;
+			}
+			if (res == 10 || res == 27 || res == ' ' ||
+				res == KEY_LEFT)
+				break;
+			else if (canbhot(res)) {
+				/* check for hot keys: */
+				int tmp = get_next_hot(res);
+				if (tmp != -1)
+					center_item(tmp, &last_top_row);
+			}
+			refresh_all_windows(main_window);
+		}
+		/* if ESC or left */
+		if (res == 27 || res == KEY_LEFT)
+			break;
+
+		child = item_data();
+		if (!child || !menu_is_visible(child))
+			continue;
+		switch (res) {
+		case ' ':
+		case  10:
+		case KEY_RIGHT:
+			sym_set_tristate_value(child->sym, yes);
+			return;
+		case 'h':
+		case '?':
+			show_help(child);
+			active = child->sym;
+			break;
+		case KEY_EXIT:
+			return;
+		}
+	}
+}
+
+static void conf_string(struct menu *menu)
+{
+	const char *prompt = menu_get_prompt(menu);
+	char dialog_input_result[256];
+
+	while (1) {
+		int res;
+		const char *heading;
+
+		switch (sym_get_type(menu->sym)) {
+		case S_INT:
+			heading = _(inputbox_instructions_int);
+			break;
+		case S_HEX:
+			heading = _(inputbox_instructions_hex);
+			break;
+		case S_STRING:
+			heading = _(inputbox_instructions_string);
+			break;
+		default:
+			heading = _("Internal nconf error!");
+		}
+		res = dialog_inputbox(main_window,
+				prompt ? _(prompt) : _("Main Menu"),
+				heading,
+				sym_get_string_value(menu->sym),
+				dialog_input_result,
+				sizeof(dialog_input_result));
+		switch (res) {
+		case 0:
+			if (sym_set_string_value(menu->sym,
+						dialog_input_result))
+				return;
+			btn_dialog(main_window,
+				_("You have made an invalid entry."), 0);
+			break;
+		case 1:
+			show_help(menu);
+			break;
+		case KEY_EXIT:
+			return;
+		}
+	}
+}
+
+static void conf_load(void)
+{
+	char dialog_input_result[256];
+	while (1) {
+		int res;
+		res = dialog_inputbox(main_window,
+				NULL, load_config_text,
+				filename,
+				dialog_input_result,
+				sizeof(dialog_input_result));
+		switch (res) {
+		case 0:
+			if (!dialog_input_result[0])
+				return;
+			if (!conf_read(dialog_input_result)) {
+				set_config_filename(dialog_input_result);
+				sym_set_change_count(1);
+				return;
+			}
+			btn_dialog(main_window, _("File does not exist!"), 0);
+			break;
+		case 1:
+			show_scroll_win(main_window,
+					_("Load Alternate Configuration"),
+					load_config_help);
+			break;
+		case KEY_EXIT:
+			return;
+		}
+	}
+}
+
+static void conf_save(void)
+{
+	char dialog_input_result[256];
+	while (1) {
+		int res;
+		res = dialog_inputbox(main_window,
+				NULL, save_config_text,
+				filename,
+				dialog_input_result,
+				sizeof(dialog_input_result));
+		switch (res) {
+		case 0:
+			if (!dialog_input_result[0])
+				return;
+			supress_stdout(0);
+			res = conf_write(dialog_input_result);
+			supress_stdout(1);
+			if (!res) {
+				char buf[1024];
+				sprintf(buf, "%s %s",
+					_("configuration file saved to: "),
+					dialog_input_result);
+				btn_dialog(main_window,
+					   buf, 1, "<OK>");
+				set_config_filename(dialog_input_result);
+				return;
+			}
+			btn_dialog(main_window, _("Can't create file! "
+				"Probably a nonexistent directory."),
+				1, "<OK>");
+			break;
+		case 1:
+			show_scroll_win(main_window,
+				_("Save Alternate Configuration"),
+				save_config_help);
+			break;
+		case KEY_EXIT:
+			return;
+		}
+	}
+}
+
+void setup_windows(void)
+{
+	if (main_window != NULL)
+		delwin(main_window);
+
+	/* set up the menu and menu window */
+	main_window = newwin(LINES-2, COLS-2, 2, 1);
+	keypad(main_window, TRUE);
+	mwin_max_lines = LINES-6;
+	mwin_max_cols = COLS-6;
+
+	/* panels order is from bottom to top */
+	new_panel(main_window);
+}
+
+int main(int ac, char **av)
+{
+	char *mode;
+
+	setlocale(LC_ALL, "");
+	bindtextdomain(PACKAGE, LOCALEDIR);
+	textdomain(PACKAGE);
+
+	conf_parse(av[1]);
+	conf_read(NULL);
+
+	mode = getenv("NCONFIG_MODE");
+	if (mode) {
+		if (!strcasecmp(mode, "single_menu"))
+			single_menu_mode = 1;
+	}
+
+	/* Initialize curses */
+	initscr();
+	/* set color theme */
+	set_colors();
+
+	cbreak();
+	noecho();
+	keypad(stdscr, TRUE);
+	curs_set(0);
+
+	if (COLS < 75 || LINES < 20) {
+		endwin();
+		printf("Your terminal should have at "
+			"least 20 lines and 75 columns\n");
+		return 1;
+	}
+
+	notimeout(stdscr, FALSE);
+	ESCDELAY = 1;
+
+	/* set btns menu */
+	curses_menu = new_menu(curses_menu_items);
+	menu_opts_off(curses_menu, O_SHOWDESC);
+	menu_opts_off(curses_menu, O_SHOWMATCH);
+	menu_opts_on(curses_menu, O_ONEVALUE);
+	menu_opts_on(curses_menu, O_NONCYCLIC);
+	set_menu_mark(curses_menu, " ");
+	set_menu_fore(curses_menu, attributes[MAIN_MENU_FORE]);
+	set_menu_back(curses_menu, attributes[MAIN_MENU_BACK]);
+	set_menu_grey(curses_menu, attributes[MAIN_MENU_GREY]);
+
+	set_config_filename(conf_get_configname());
+	setup_windows();
+
+	/* check for KEY_FUNC(1) */
+	if (has_key(KEY_F(1)) == FALSE) {
+		show_scroll_win(main_window,
+				_("Instructions"),
+				_(menu_no_f_instructions));
+	}
+
+
+
+	/* do the work */
+	while (!global_exit) {
+		conf(&rootmenu);
+		if (!global_exit && do_exit() == 0)
+			break;
+	}
+	/* ok, we are done */
+	unpost_menu(curses_menu);
+	free_menu(curses_menu);
+	delwin(main_window);
+	clear();
+	refresh();
+	endwin();
+	return 0;
+}
+
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
new file mode 100644
index 00000000000..a9d9344e136
--- /dev/null
+++ b/scripts/kconfig/nconf.gui.c
@@ -0,0 +1,617 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+#include "nconf.h"
+
+/* a list of all the different widgets we use */
+attributes_t attributes[ATTR_MAX+1] = {0};
+
+/* available colors:
+   COLOR_BLACK   0
+   COLOR_RED     1
+   COLOR_GREEN   2
+   COLOR_YELLOW  3
+   COLOR_BLUE    4
+   COLOR_MAGENTA 5
+   COLOR_CYAN    6
+   COLOR_WHITE   7
+   */
+static void set_normal_colors(void)
+{
+	init_pair(NORMAL, -1, -1);
+	init_pair(MAIN_HEADING, COLOR_MAGENTA, -1);
+
+	/* FORE is for the selected item */
+	init_pair(MAIN_MENU_FORE, -1, -1);
+	/* BACK for all the rest */
+	init_pair(MAIN_MENU_BACK, -1, -1);
+	init_pair(MAIN_MENU_GREY, -1, -1);
+	init_pair(MAIN_MENU_HEADING, COLOR_GREEN, -1);
+	init_pair(MAIN_MENU_BOX, COLOR_YELLOW, -1);
+
+	init_pair(SCROLLWIN_TEXT, -1, -1);
+	init_pair(SCROLLWIN_HEADING, COLOR_GREEN, -1);
+	init_pair(SCROLLWIN_BOX, COLOR_YELLOW, -1);
+
+	init_pair(DIALOG_TEXT, -1, -1);
+	init_pair(DIALOG_BOX, COLOR_YELLOW, -1);
+	init_pair(DIALOG_MENU_BACK, COLOR_YELLOW, -1);
+	init_pair(DIALOG_MENU_FORE, COLOR_RED, -1);
+
+	init_pair(INPUT_BOX, COLOR_YELLOW, -1);
+	init_pair(INPUT_HEADING, COLOR_GREEN, -1);
+	init_pair(INPUT_TEXT, -1, -1);
+	init_pair(INPUT_FIELD, -1, -1);
+
+	init_pair(FUNCTION_HIGHLIGHT, -1, -1);
+	init_pair(FUNCTION_TEXT, COLOR_BLUE, -1);
+}
+
+/* available attributes:
+   A_NORMAL        Normal display (no highlight)
+   A_STANDOUT      Best highlighting mode of the terminal.
+   A_UNDERLINE     Underlining
+   A_REVERSE       Reverse video
+   A_BLINK         Blinking
+   A_DIM           Half bright
+   A_BOLD          Extra bright or bold
+   A_PROTECT       Protected mode
+   A_INVIS         Invisible or blank mode
+   A_ALTCHARSET    Alternate character set
+   A_CHARTEXT      Bit-mask to extract a character
+   COLOR_PAIR(n)   Color-pair number n
+   */
+static void normal_color_theme(void)
+{
+	/* automatically add color... */
+#define mkattr(name, attr) do { \
+attributes[name] = attr | COLOR_PAIR(name); } while (0)
+	mkattr(NORMAL, NORMAL);
+	mkattr(MAIN_HEADING, A_BOLD | A_UNDERLINE);
+
+	mkattr(MAIN_MENU_FORE, A_REVERSE);
+	mkattr(MAIN_MENU_BACK, A_NORMAL);
+	mkattr(MAIN_MENU_GREY, A_NORMAL);
+	mkattr(MAIN_MENU_HEADING, A_BOLD);
+	mkattr(MAIN_MENU_BOX, A_NORMAL);
+
+	mkattr(SCROLLWIN_TEXT, A_NORMAL);
+	mkattr(SCROLLWIN_HEADING, A_BOLD);
+	mkattr(SCROLLWIN_BOX, A_BOLD);
+
+	mkattr(DIALOG_TEXT, A_BOLD);
+	mkattr(DIALOG_BOX, A_BOLD);
+	mkattr(DIALOG_MENU_FORE, A_STANDOUT);
+	mkattr(DIALOG_MENU_BACK, A_NORMAL);
+
+	mkattr(INPUT_BOX, A_NORMAL);
+	mkattr(INPUT_HEADING, A_BOLD);
+	mkattr(INPUT_TEXT, A_NORMAL);
+	mkattr(INPUT_FIELD, A_UNDERLINE);
+
+	mkattr(FUNCTION_HIGHLIGHT, A_BOLD);
+	mkattr(FUNCTION_TEXT, A_REVERSE);
+}
+
+static void no_colors_theme(void)
+{
+	/* automatically add highlight, no color */
+#define mkattrn(name, attr) { attributes[name] = attr; }
+
+	mkattrn(NORMAL, NORMAL);
+	mkattrn(MAIN_HEADING, A_BOLD | A_UNDERLINE);
+
+	mkattrn(MAIN_MENU_FORE, A_STANDOUT);
+	mkattrn(MAIN_MENU_BACK, A_NORMAL);
+	mkattrn(MAIN_MENU_GREY, A_NORMAL);
+	mkattrn(MAIN_MENU_HEADING, A_BOLD);
+	mkattrn(MAIN_MENU_BOX, A_NORMAL);
+
+	mkattrn(SCROLLWIN_TEXT, A_NORMAL);
+	mkattrn(SCROLLWIN_HEADING, A_BOLD);
+	mkattrn(SCROLLWIN_BOX, A_BOLD);
+
+	mkattrn(DIALOG_TEXT, A_NORMAL);
+	mkattrn(DIALOG_BOX, A_BOLD);
+	mkattrn(DIALOG_MENU_FORE, A_STANDOUT);
+	mkattrn(DIALOG_MENU_BACK, A_NORMAL);
+
+	mkattrn(INPUT_BOX, A_BOLD);
+	mkattrn(INPUT_HEADING, A_BOLD);
+	mkattrn(INPUT_TEXT, A_NORMAL);
+	mkattrn(INPUT_FIELD, A_UNDERLINE);
+
+	mkattrn(FUNCTION_HIGHLIGHT, A_BOLD);
+	mkattrn(FUNCTION_TEXT, A_REVERSE);
+}
+
+void set_colors()
+{
+	start_color();
+	use_default_colors();
+	set_normal_colors();
+	if (has_colors()) {
+		normal_color_theme();
+	} else {
+		/* give deafults */
+		no_colors_theme();
+	}
+}
+
+
+/* this changes the windows attributes !!! */
+void print_in_middle(WINDOW *win,
+		int starty,
+		int startx,
+		int width,
+		const char *string,
+		chtype color)
+{      int length, x, y;
+	float temp;
+
+
+	if (win == NULL)
+		win = stdscr;
+	getyx(win, y, x);
+	if (startx != 0)
+		x = startx;
+	if (starty != 0)
+		y = starty;
+	if (width == 0)
+		width = 80;
+
+	length = strlen(string);
+	temp = (width - length) / 2;
+	x = startx + (int)temp;
+	wattrset(win, color);
+	mvwprintw(win, y, x, "%s", string);
+	refresh();
+}
+
+int get_line_no(const char *text)
+{
+	int i;
+	int total = 1;
+
+	if (!text)
+		return 0;
+
+	for (i = 0; text[i] != '\0'; i++)
+		if (text[i] == '\n')
+			total++;
+	return total;
+}
+
+const char *get_line(const char *text, int line_no)
+{
+	int i;
+	int lines = 0;
+
+	if (!text)
+		return 0;
+
+	for (i = 0; text[i] != '\0' && lines < line_no; i++)
+		if (text[i] == '\n')
+			lines++;
+	return text+i;
+}
+
+int get_line_length(const char *line)
+{
+	int res = 0;
+	while (*line != '\0' && *line != '\n') {
+		line++;
+		res++;
+	}
+	return res;
+}
+
+/* print all lines to the window. */
+void fill_window(WINDOW *win, const char *text)
+{
+	int x, y;
+	int total_lines = get_line_no(text);
+	int i;
+
+	getmaxyx(win, y, x);
+	/* do not go over end of line */
+	total_lines = min(total_lines, y);
+	for (i = 0; i < total_lines; i++) {
+		char tmp[x+10];
+		const char *line = get_line(text, i);
+		int len = get_line_length(line);
+		strncpy(tmp, line, min(len, x));
+		tmp[len] = '\0';
+		mvwprintw(win, i, 0, "%s", tmp);
+	}
+}
+
+/* get the message, and buttons.
+ * each button must be a char*
+ * return the selected button
+ *
+ * this dialog is used for 2 different things:
+ * 1) show a text box, no buttons.
+ * 2) show a dialog, with horizontal buttons
+ */
+int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...)
+{
+	va_list ap;
+	char *btn;
+	int btns_width = 0;
+	int msg_lines = 0;
+	int msg_width = 0;
+	int total_width;
+	int win_rows = 0;
+	WINDOW *win;
+	WINDOW *msg_win;
+	WINDOW *menu_win;
+	MENU *menu;
+	ITEM *btns[btn_num+1];
+	int i, x, y;
+	int res = -1;
+
+
+	va_start(ap, btn_num);
+	for (i = 0; i < btn_num; i++) {
+		btn = va_arg(ap, char *);
+		btns[i] = new_item(btn, "");
+		btns_width += strlen(btn)+1;
+	}
+	va_end(ap);
+	btns[btn_num] = NULL;
+
+	/* find the widest line of msg: */
+	msg_lines = get_line_no(msg);
+	for (i = 0; i < msg_lines; i++) {
+		const char *line = get_line(msg, i);
+		int len = get_line_length(line);
+		if (msg_width < len)
+			msg_width = len;
+	}
+
+	total_width = max(msg_width, btns_width);
+	/* place dialog in middle of screen */
+	y = (LINES-(msg_lines+4))/2;
+	x = (COLS-(total_width+4))/2;
+
+
+	/* create the windows */
+	if (btn_num > 0)
+		win_rows = msg_lines+4;
+	else
+		win_rows = msg_lines+2;
+
+	win = newwin(win_rows, total_width+4, y, x);
+	keypad(win, TRUE);
+	menu_win = derwin(win, 1, btns_width, win_rows-2,
+			1+(total_width+2-btns_width)/2);
+	menu = new_menu(btns);
+	msg_win = derwin(win, win_rows-2, msg_width, 1,
+			1+(total_width+2-msg_width)/2);
+
+	set_menu_fore(menu, attributes[DIALOG_MENU_FORE]);
+	set_menu_back(menu, attributes[DIALOG_MENU_BACK]);
+
+	wattrset(win, attributes[DIALOG_BOX]);
+	box(win, 0, 0);
+
+	/* print message */
+	wattrset(msg_win, attributes[DIALOG_TEXT]);
+	fill_window(msg_win, msg);
+
+	set_menu_win(menu, win);
+	set_menu_sub(menu, menu_win);
+	set_menu_format(menu, 1, btn_num);
+	menu_opts_off(menu, O_SHOWDESC);
+	menu_opts_off(menu, O_SHOWMATCH);
+	menu_opts_on(menu, O_ONEVALUE);
+	menu_opts_on(menu, O_NONCYCLIC);
+	set_menu_mark(menu, "");
+	post_menu(menu);
+
+
+	touchwin(win);
+	refresh_all_windows(main_window);
+	while ((res = wgetch(win))) {
+		switch (res) {
+		case KEY_LEFT:
+			menu_driver(menu, REQ_LEFT_ITEM);
+			break;
+		case KEY_RIGHT:
+			menu_driver(menu, REQ_RIGHT_ITEM);
+			break;
+		case 10: /* ENTER */
+		case 27: /* ESCAPE */
+		case ' ':
+		case KEY_F(F_BACK):
+		case KEY_F(F_EXIT):
+			break;
+		}
+		touchwin(win);
+		refresh_all_windows(main_window);
+
+		if (res == 10 || res == ' ') {
+			res = item_index(current_item(menu));
+			break;
+		} else if (res == 27 || res == KEY_F(F_BACK) ||
+				res == KEY_F(F_EXIT)) {
+			res = KEY_EXIT;
+			break;
+		}
+	}
+
+	unpost_menu(menu);
+	free_menu(menu);
+	for (i = 0; i < btn_num; i++)
+		free_item(btns[i]);
+
+	delwin(win);
+	return res;
+}
+
+int dialog_inputbox(WINDOW *main_window,
+		const char *title, const char *prompt,
+		const char *init, char *result, int result_len)
+{
+	int prompt_lines = 0;
+	int prompt_width = 0;
+	WINDOW *win;
+	WINDOW *prompt_win;
+	WINDOW *form_win;
+	PANEL *panel;
+	int i, x, y;
+	int res = -1;
+	int cursor_position = strlen(init);
+
+
+	/* find the widest line of msg: */
+	prompt_lines = get_line_no(prompt);
+	for (i = 0; i < prompt_lines; i++) {
+		const char *line = get_line(prompt, i);
+		int len = get_line_length(line);
+		prompt_width = max(prompt_width, len);
+	}
+
+	if (title)
+		prompt_width = max(prompt_width, strlen(title));
+
+	/* place dialog in middle of screen */
+	y = (LINES-(prompt_lines+4))/2;
+	x = (COLS-(prompt_width+4))/2;
+
+	strncpy(result, init, result_len);
+
+	/* create the windows */
+	win = newwin(prompt_lines+6, prompt_width+7, y, x);
+	prompt_win = derwin(win, prompt_lines+1, prompt_width, 2, 2);
+	form_win = derwin(win, 1, prompt_width, prompt_lines+3, 2);
+	keypad(form_win, TRUE);
+
+	wattrset(form_win, attributes[INPUT_FIELD]);
+
+	wattrset(win, attributes[INPUT_BOX]);
+	box(win, 0, 0);
+	wattrset(win, attributes[INPUT_HEADING]);
+	if (title)
+		mvwprintw(win, 0, 3, "%s", title);
+
+	/* print message */
+	wattrset(prompt_win, attributes[INPUT_TEXT]);
+	fill_window(prompt_win, prompt);
+
+	mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
+	mvwprintw(form_win, 0, 0, "%s", result);
+
+	/* create panels */
+	panel = new_panel(win);
+
+	/* show the cursor */
+	curs_set(1);
+
+	touchwin(win);
+	refresh_all_windows(main_window);
+	while ((res = wgetch(form_win))) {
+		int len = strlen(result);
+		switch (res) {
+		case 10: /* ENTER */
+		case 27: /* ESCAPE */
+		case KEY_F(F_HELP):
+		case KEY_F(F_EXIT):
+		case KEY_F(F_BACK):
+			break;
+		case 127:
+		case KEY_BACKSPACE:
+			if (cursor_position > 0) {
+				memmove(&result[cursor_position-1],
+						&result[cursor_position],
+						len-cursor_position+1);
+				cursor_position--;
+			}
+			break;
+		case KEY_DC:
+			if (cursor_position >= 0 && cursor_position < len) {
+				memmove(&result[cursor_position],
+						&result[cursor_position+1],
+						len-cursor_position+1);
+			}
+			break;
+		case KEY_UP:
+		case KEY_RIGHT:
+			if (cursor_position < len &&
+			    cursor_position < min(result_len, prompt_width))
+				cursor_position++;
+			break;
+		case KEY_DOWN:
+		case KEY_LEFT:
+			if (cursor_position > 0)
+				cursor_position--;
+			break;
+		default:
+			if ((isgraph(res) || isspace(res)) &&
+					len-2 < result_len) {
+				/* insert the char at the proper position */
+				memmove(&result[cursor_position+1],
+						&result[cursor_position],
+						len+1);
+				result[cursor_position] = res;
+				cursor_position++;
+			} else {
+				mvprintw(0, 0, "unknow key: %d\n", res);
+			}
+			break;
+		}
+		wmove(form_win, 0, 0);
+		wclrtoeol(form_win);
+		mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
+		mvwprintw(form_win, 0, 0, "%s", result);
+		wmove(form_win, 0, cursor_position);
+		touchwin(win);
+		refresh_all_windows(main_window);
+
+		if (res == 10) {
+			res = 0;
+			break;
+		} else if (res == 27 || res == KEY_F(F_BACK) ||
+				res == KEY_F(F_EXIT)) {
+			res = KEY_EXIT;
+			break;
+		} else if (res == KEY_F(F_HELP)) {
+			res = 1;
+			break;
+		}
+	}
+
+	/* hide the cursor */
+	curs_set(0);
+	del_panel(panel);
+	delwin(prompt_win);
+	delwin(form_win);
+	delwin(win);
+	return res;
+}
+
+/* refresh all windows in the correct order */
+void refresh_all_windows(WINDOW *main_window)
+{
+	update_panels();
+	touchwin(main_window);
+	refresh();
+}
+
+/* layman's scrollable window... */
+void show_scroll_win(WINDOW *main_window,
+		const char *title,
+		const char *text)
+{
+	int res;
+	int total_lines = get_line_no(text);
+	int x, y;
+	int start_x = 0, start_y = 0;
+	int text_lines = 0, text_cols = 0;
+	int total_cols = 0;
+	int win_cols = 0;
+	int win_lines = 0;
+	int i = 0;
+	WINDOW *win;
+	WINDOW *pad;
+	PANEL *panel;
+
+	/* find the widest line of msg: */
+	total_lines = get_line_no(text);
+	for (i = 0; i < total_lines; i++) {
+		const char *line = get_line(text, i);
+		int len = get_line_length(line);
+		total_cols = max(total_cols, len+2);
+	}
+
+	/* create the pad */
+	pad = newpad(total_lines+10, total_cols+10);
+	wattrset(pad, attributes[SCROLLWIN_TEXT]);
+	fill_window(pad, text);
+
+	win_lines = min(total_lines+4, LINES-2);
+	win_cols = min(total_cols+2, COLS-2);
+	text_lines = max(win_lines-4, 0);
+	text_cols = max(win_cols-2, 0);
+
+	/* place window in middle of screen */
+	y = (LINES-win_lines)/2;
+	x = (COLS-win_cols)/2;
+
+	win = newwin(win_lines, win_cols, y, x);
+	keypad(win, TRUE);
+	/* show the help in the help window, and show the help panel */
+	wattrset(win, attributes[SCROLLWIN_BOX]);
+	box(win, 0, 0);
+	wattrset(win, attributes[SCROLLWIN_HEADING]);
+	mvwprintw(win, 0, 3, " %s ", title);
+	panel = new_panel(win);
+
+	/* handle scrolling */
+	do {
+
+		copywin(pad, win, start_y, start_x, 2, 2, text_lines,
+				text_cols, 0);
+		print_in_middle(win,
+				text_lines+2,
+				0,
+				text_cols,
+				"<OK>",
+				attributes[DIALOG_MENU_FORE]);
+		wrefresh(win);
+
+		res = wgetch(win);
+		switch (res) {
+		case KEY_NPAGE:
+		case ' ':
+			start_y += text_lines-2;
+			break;
+		case KEY_PPAGE:
+			start_y -= text_lines+2;
+			break;
+		case KEY_HOME:
+			start_y = 0;
+			break;
+		case KEY_END:
+			start_y = total_lines-text_lines;
+			break;
+		case KEY_DOWN:
+		case 'j':
+			start_y++;
+			break;
+		case KEY_UP:
+		case 'k':
+			start_y--;
+			break;
+		case KEY_LEFT:
+		case 'h':
+			start_x--;
+			break;
+		case KEY_RIGHT:
+		case 'l':
+			start_x++;
+			break;
+		}
+		if (res == 10 || res == 27 || res == 'q'
+		    || res == KEY_F(F_BACK) || res == KEY_F(F_EXIT)) {
+			break;
+		}
+		if (start_y < 0)
+			start_y = 0;
+		if (start_y >= total_lines-text_lines)
+			start_y = total_lines-text_lines;
+		if (start_x < 0)
+			start_x = 0;
+		if (start_x >= total_cols-text_cols)
+			start_x = total_cols-text_cols;
+	} while (res);
+
+	del_panel(panel);
+	delwin(win);
+	refresh_all_windows(main_window);
+}
diff --git a/scripts/kconfig/nconf.h b/scripts/kconfig/nconf.h
new file mode 100644
index 00000000000..fb429666600
--- /dev/null
+++ b/scripts/kconfig/nconf.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <locale.h>
+#include <curses.h>
+#include <menu.h>
+#include <panel.h>
+#include <form.h>
+
+#include <stdio.h>
+#include <time.h>
+#include <sys/time.h>
+
+#include "ncurses.h"
+
+#define max(a, b) ({\
+		typeof(a) _a = a;\
+		typeof(b) _b = b;\
+		_a > _b ? _a : _b; })
+
+#define min(a, b) ({\
+		typeof(a) _a = a;\
+		typeof(b) _b = b;\
+		_a < _b ? _a : _b; })
+
+typedef enum {
+	NORMAL = 1,
+	MAIN_HEADING,
+	MAIN_MENU_BOX,
+	MAIN_MENU_FORE,
+	MAIN_MENU_BACK,
+	MAIN_MENU_GREY,
+	MAIN_MENU_HEADING,
+	SCROLLWIN_TEXT,
+	SCROLLWIN_HEADING,
+	SCROLLWIN_BOX,
+	DIALOG_TEXT,
+	DIALOG_MENU_FORE,
+	DIALOG_MENU_BACK,
+	DIALOG_BOX,
+	INPUT_BOX,
+	INPUT_HEADING,
+	INPUT_TEXT,
+	INPUT_FIELD,
+	FUNCTION_TEXT,
+	FUNCTION_HIGHLIGHT,
+	ATTR_MAX
+} attributes_t;
+extern attributes_t attributes[];
+
+typedef enum {
+	F_HELP = 1,
+	F_SYMBOL = 2,
+	F_INSTS = 3,
+	F_CONF = 4,
+	F_BACK = 5,
+	F_SAVE = 6,
+	F_LOAD = 7,
+	F_EXIT = 8
+} function_key;
+
+void set_colors(void);
+
+/* this changes the windows attributes !!! */
+void print_in_middle(WINDOW *win,
+		int starty,
+		int startx,
+		int width,
+		const char *string,
+		chtype color);
+int get_line_length(const char *line);
+int get_line_no(const char *text);
+const char *get_line(const char *text, int line_no);
+void fill_window(WINDOW *win, const char *text);
+int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...);
+int dialog_inputbox(WINDOW *main_window,
+		const char *title, const char *prompt,
+		const char *init, char *result, int result_len);
+void refresh_all_windows(WINDOW *main_window);
+void show_scroll_win(WINDOW *main_window,
+		const char *title,
+		const char *text);
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 6c8fbbb66eb..2e7a048e0cf 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -651,12 +651,20 @@ bool sym_is_changable(struct symbol *sym)
 	return sym->visible > sym->rev_dep.tri;
 }
 
+static unsigned strhash(const char *s)
+{
+	/* fnv32 hash */
+	unsigned hash = 2166136261U;
+	for (; *s; s++)
+		hash = (hash ^ *s) * 0x01000193;
+	return hash;
+}
+
 struct symbol *sym_lookup(const char *name, int flags)
 {
 	struct symbol *symbol;
-	const char *ptr;
 	char *new_name;
-	int hash = 0;
+	int hash;
 
 	if (name) {
 		if (name[0] && !name[1]) {
@@ -666,12 +674,11 @@ struct symbol *sym_lookup(const char *name, int flags)
 			case 'n': return &symbol_no;
 			}
 		}
-		for (ptr = name; *ptr; ptr++)
-			hash += *ptr;
-		hash &= 0xff;
+		hash = strhash(name) % SYMBOL_HASHSIZE;
 
 		for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
-			if (!strcmp(symbol->name, name) &&
+			if (symbol->name &&
+			    !strcmp(symbol->name, name) &&
 			    (flags ? symbol->flags & flags
 				   : !(symbol->flags & (SYMBOL_CONST|SYMBOL_CHOICE))))
 				return symbol;
@@ -679,7 +686,7 @@ struct symbol *sym_lookup(const char *name, int flags)
 		new_name = strdup(name);
 	} else {
 		new_name = NULL;
-		hash = 256;
+		hash = 0;
 	}
 
 	symbol = malloc(sizeof(*symbol));
@@ -697,7 +704,6 @@ struct symbol *sym_lookup(const char *name, int flags)
 struct symbol *sym_find(const char *name)
 {
 	struct symbol *symbol = NULL;
-	const char *ptr;
 	int hash = 0;
 
 	if (!name)
@@ -710,12 +716,11 @@ struct symbol *sym_find(const char *name)
 		case 'n': return &symbol_no;
 		}
 	}
-	for (ptr = name; *ptr; ptr++)
-		hash += *ptr;
-	hash &= 0xff;
+	hash = strhash(name) % SYMBOL_HASHSIZE;
 
 	for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
-		if (!strcmp(symbol->name, name) &&
+		if (symbol->name &&
+		    !strcmp(symbol->name, name) &&
 		    !(symbol->flags & SYMBOL_CONST))
 				break;
 	}
@@ -750,6 +755,7 @@ struct symbol **sym_re_search(const char *pattern)
 				return NULL;
 			}
 		}
+		sym_calc_value(sym);
 		sym_arr[cnt++] = sym;
 	}
 	if (sym_arr)
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index 25d1ec4ca28..78b5c04e736 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -78,6 +78,7 @@ struct gstr str_new(void)
 	struct gstr gs;
 	gs.s = malloc(sizeof(char) * 64);
 	gs.len = 64;
+	gs.max_width = 0;
 	strcpy(gs.s, "\0");
 	return gs;
 }
@@ -88,6 +89,7 @@ struct gstr str_assign(const char *s)
 	struct gstr gs;
 	gs.s = strdup(s);
 	gs.len = strlen(s) + 1;
+	gs.max_width = 0;
 	return gs;
 }
 
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index 6e9dcd59aa8..32a9eefd842 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -104,7 +104,7 @@ static void zconf_error(const char *err, ...);
 static void zconferror(const char *err);
 static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
 
-struct symbol *symbol_hash[257];
+struct symbol *symbol_hash[SYMBOL_HASHSIZE];
 
 static struct menu *current_menu, *current_entry;
 
@@ -2220,7 +2220,7 @@ void conf_parse(const char *name)
 	zconf_initscan(name);
 
 	sym_init();
-	menu_init();
+	_menu_init();
 	modules_sym = sym_lookup(NULL, 0);
 	modules_sym->type = S_BOOLEAN;
 	modules_sym->flags |= SYMBOL_AUTO;
@@ -2336,9 +2336,9 @@ static void print_symbol(FILE *out, struct menu *menu)
 	struct property *prop;
 
 	if (sym_is_choice(sym))
-		fprintf(out, "choice\n");
+		fprintf(out, "\nchoice\n");
 	else
-		fprintf(out, "config %s\n", sym->name);
+		fprintf(out, "\nconfig %s\n", sym->name);
 	switch (sym->type) {
 	case S_BOOLEAN:
 		fputs("  boolean\n", out);
@@ -2384,6 +2384,21 @@ static void print_symbol(FILE *out, struct menu *menu)
 		case P_CHOICE:
 			fputs("  #choice value\n", out);
 			break;
+		case P_SELECT:
+			fputs( "  select ", out);
+			expr_fprint(prop->expr, out);
+			fputc('\n', out);
+			break;
+		case P_RANGE:
+			fputs( "  range ", out);
+			expr_fprint(prop->expr, out);
+			fputc('\n', out);
+			break;
+		case P_MENU:
+			fputs( "  menu ", out);
+			print_quoted_string(out, prop->text);
+			fputc('\n', out);
+			break;
 		default:
 			fprintf(out, "  unknown prop %d!\n", prop->type);
 			break;
@@ -2395,7 +2410,6 @@ static void print_symbol(FILE *out, struct menu *menu)
 			menu->help[len] = 0;
 		fprintf(out, "  help\n%s\n", menu->help);
 	}
-	fputc('\n', out);
 }
 
 void zconfdump(FILE *out)
@@ -2428,7 +2442,6 @@ void zconfdump(FILE *out)
 				expr_fprint(prop->visible.expr, out);
 				fputc('\n', out);
 			}
-			fputs("\n", out);
 		}
 
 		if (menu->list)
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 8c43491f8cc..23dfd3baa7a 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -27,7 +27,7 @@ static void zconf_error(const char *err, ...);
 static void zconferror(const char *err);
 static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
 
-struct symbol *symbol_hash[257];
+struct symbol *symbol_hash[SYMBOL_HASHSIZE];
 
 static struct menu *current_menu, *current_entry;
 
@@ -475,7 +475,7 @@ void conf_parse(const char *name)
 	zconf_initscan(name);
 
 	sym_init();
-	menu_init();
+	_menu_init();
 	modules_sym = sym_lookup(NULL, 0);
 	modules_sym->type = S_BOOLEAN;
 	modules_sym->flags |= SYMBOL_AUTO;
@@ -591,9 +591,9 @@ static void print_symbol(FILE *out, struct menu *menu)
 	struct property *prop;
 
 	if (sym_is_choice(sym))
-		fprintf(out, "choice\n");
+		fprintf(out, "\nchoice\n");
 	else
-		fprintf(out, "config %s\n", sym->name);
+		fprintf(out, "\nconfig %s\n", sym->name);
 	switch (sym->type) {
 	case S_BOOLEAN:
 		fputs("  boolean\n", out);
@@ -639,6 +639,21 @@ static void print_symbol(FILE *out, struct menu *menu)
 		case P_CHOICE:
 			fputs("  #choice value\n", out);
 			break;
+		case P_SELECT:
+			fputs( "  select ", out);
+			expr_fprint(prop->expr, out);
+			fputc('\n', out);
+			break;
+		case P_RANGE:
+			fputs( "  range ", out);
+			expr_fprint(prop->expr, out);
+			fputc('\n', out);
+			break;
+		case P_MENU:
+			fputs( "  menu ", out);
+			print_quoted_string(out, prop->text);
+			fputc('\n', out);
+			break;
 		default:
 			fprintf(out, "  unknown prop %d!\n", prop->type);
 			break;
@@ -650,7 +665,6 @@ static void print_symbol(FILE *out, struct menu *menu)
 			menu->help[len] = 0;
 		fprintf(out, "  help\n%s\n", menu->help);
 	}
-	fputc('\n', out);
 }
 
 void zconfdump(FILE *out)
@@ -683,7 +697,6 @@ void zconfdump(FILE *out)
 				expr_fprint(prop->visible.expr, out);
 				fputc('\n', out);
 			}
-			fputs("\n", out);
 		}
 
 		if (menu->list)
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index e950f9cde01..827896f5650 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -2,6 +2,7 @@
 
 use File::Basename;
 use Math::BigInt;
+use Getopt::Long;
 
 # Copyright 2008, Intel Corporation
 #
@@ -15,6 +16,16 @@ use Math::BigInt;
 # 	Arjan van de Ven <arjan@linux.intel.com>
 
 
+my $cross_compile = "";
+my $vmlinux_name = "";
+my $modulefile = "";
+
+# Get options
+Getopt::Long::GetOptions(
+	'cross-compile|c=s'	=> \$cross_compile,
+	'module|m=s'		=> \$modulefile,
+	'help|h'		=> \&usage,
+) || usage ();
 my $vmlinux_name = $ARGV[0];
 if (!defined($vmlinux_name)) {
 	my $kerver = `uname -r`;
@@ -23,9 +34,8 @@ if (!defined($vmlinux_name)) {
 	print "No vmlinux specified, assuming $vmlinux_name\n";
 }
 my $filename = $vmlinux_name;
-#
-# Step 1: Parse the oops to find the EIP value
-#
+
+# Parse the oops to find the EIP value
 
 my $target = "0";
 my $function;
@@ -177,26 +187,26 @@ my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("
 my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
 if ($target eq "0") {
 	print "No oops found!\n";
-	print "Usage: \n";
-	print "    dmesg | perl scripts/markup_oops.pl vmlinux\n";
-	exit;
+	usage();
 }
 
 # if it's a module, we need to find the .ko file and calculate a load offset
 if ($module ne "") {
-	my $modulefile = `modinfo $module | grep '^filename:' | awk '{ print \$2 }'`;
-	chomp($modulefile);
+	if ($modulefile eq "") {
+		$modulefile = `modinfo -F filename $module`;
+		chomp($modulefile);
+	}
 	$filename = $modulefile;
 	if ($filename eq "") {
 		print "Module .ko file for $module not found. Aborting\n";
 		exit;
 	}
 	# ok so we found the module, now we need to calculate the vma offset
-	open(FILE, "objdump -dS $filename |") || die "Cannot start objdump";
+	open(FILE, $cross_compile."objdump -dS $filename |") || die "Cannot start objdump";
 	while (<FILE>) {
 		if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) {
 			my $fu = $1;
-			$vmaoffset = hex($target) - hex($fu) - hex($func_offset);
+			$vmaoffset = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$fu") - Math::BigInt->from_hex("0x$func_offset");
 		}
 	}
 	close(FILE);
@@ -204,7 +214,7 @@ if ($module ne "") {
 
 my $counter = 0;
 my $state   = 0;
-my $center  = 0;
+my $center  = -1;
 my @lines;
 my @reglines;
 
@@ -212,7 +222,7 @@ sub InRange {
 	my ($address, $target) = @_;
 	my $ad = "0x".$address;
 	my $ta = "0x".$target;
-	my $delta = hex($ad) - hex($ta);
+	my $delta = Math::BigInt->from_hex($ad) - Math::BigInt->from_hex($ta);
 
 	if (($delta > -4096) && ($delta < 4096)) {
 		return 1;
@@ -225,7 +235,7 @@ sub InRange {
 # first, parse the input into the lines array, but to keep size down,
 # we only do this for 4Kb around the sweet spot
 
-open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
+open(FILE, $cross_compile."objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
 
 while (<FILE>) {
 	my $line = $_;
@@ -236,7 +246,8 @@ while (<FILE>) {
 				$state = 1;
 			}
 		}
-	} else {
+	}
+	if ($state == 1) {
 		if ($line =~ /^([a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]+)\:/) {
 			my $val = $1;
 			if (!InRange($val, $target)) {
@@ -259,7 +270,7 @@ if ($counter == 0) {
 	exit;
 }
 
-if ($center == 0) {
+if ($center == -1) {
 	print "No matching code found \n";
 	exit;
 }
@@ -344,3 +355,16 @@ while ($i < $finish) {
 	$i = $i +1;
 }
 
+sub usage {
+	print <<EOT;
+Usage:
+  dmesg | perl $0 [OPTION] [VMLINUX]
+
+OPTION:
+  -c, --cross-compile CROSS_COMPILE	Specify the prefix used for toolchain.
+  -m, --module MODULE_DIRNAME		Specify the module filename.
+  -h, --help				Help.
+EOT
+	exit;
+}
+
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 23dbad80cce..50ad317a4bf 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -67,9 +67,8 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
   echo \#define LINUX_COMPILE_BY \"`whoami`\"
   echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
 
-  if [ -x /bin/dnsdomainname ]; then
-    domain=`dnsdomainname 2> /dev/null`
-  elif [ -x /bin/domainname ]; then
+  domain=`dnsdomainname 2> /dev/null`
+  if [ -z "$domain" ]; then
     domain=`domainname 2> /dev/null`
   fi
 
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 20923613467..f6127b9f5ac 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -503,6 +503,11 @@ static int ignore_undef_symbol(struct elf_info *info, const char *symname)
 		    strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
 		    strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
 			return 1;
+	if (info->hdr->e_machine == EM_PPC64)
+		/* Special register function linked on all modules during final link of .ko */
+		if (strncmp(symname, "_restgpr0_", sizeof("_restgpr0_") - 1) == 0 ||
+		    strncmp(symname, "_savegpr0_", sizeof("_savegpr0_") - 1) == 0)
+			return 1;
 	/* Do not ignore this symbol */
 	return 0;
 }
@@ -781,10 +786,13 @@ static void check_section(const char *modname, struct elf_info *elf,
 #define ALL_EXIT_TEXT_SECTIONS \
 	".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
 
-#define ALL_INIT_SECTIONS INIT_SECTIONS, DEV_INIT_SECTIONS, \
-	CPU_INIT_SECTIONS, MEM_INIT_SECTIONS
-#define ALL_EXIT_SECTIONS EXIT_SECTIONS, DEV_EXIT_SECTIONS, \
-	CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS
+#define ALL_XXXINIT_SECTIONS DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, \
+	MEM_INIT_SECTIONS
+#define ALL_XXXEXIT_SECTIONS DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, \
+	MEM_EXIT_SECTIONS
+
+#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
+#define ALL_EXIT_SECTIONS EXIT_SECTIONS, ALL_XXXEXIT_SECTIONS
 
 #define DATA_SECTIONS ".data$", ".data.rel$"
 #define TEXT_SECTIONS ".text$"
@@ -814,33 +822,29 @@ static const char *data_sections[] = { DATA_SECTIONS, NULL };
 
 
 /* symbols in .data that may refer to init/exit sections */
-static const char *symbol_white_list[] =
-{
-	"*driver",
-	"*_template", /* scsi uses *_template a lot */
-	"*_timer",    /* arm uses ops structures named _timer a lot */
-	"*_sht",      /* scsi also used *_sht to some extent */
-	"*_ops",
-	"*_probe",
-	"*_probe_one",
-	"*_console",
-	NULL
-};
+#define DEFAULT_SYMBOL_WHITE_LIST					\
+	"*driver",							\
+	"*_template", /* scsi uses *_template a lot */			\
+	"*_timer",    /* arm uses ops structures named _timer a lot */	\
+	"*_sht",      /* scsi also used *_sht to some extent */		\
+	"*_ops",							\
+	"*_probe",							\
+	"*_probe_one",							\
+	"*_console"
 
 static const char *head_sections[] = { ".head.text*", NULL };
 static const char *linker_symbols[] =
 	{ "__init_begin", "_sinittext", "_einittext", NULL };
 
 enum mismatch {
-	NO_MISMATCH,
-	TEXT_TO_INIT,
-	DATA_TO_INIT,
-	TEXT_TO_EXIT,
-	DATA_TO_EXIT,
-	XXXINIT_TO_INIT,
-	XXXEXIT_TO_EXIT,
-	INIT_TO_EXIT,
-	EXIT_TO_INIT,
+	TEXT_TO_ANY_INIT,
+	DATA_TO_ANY_INIT,
+	TEXT_TO_ANY_EXIT,
+	DATA_TO_ANY_EXIT,
+	XXXINIT_TO_SOME_INIT,
+	XXXEXIT_TO_SOME_EXIT,
+	ANY_INIT_TO_ANY_EXIT,
+	ANY_EXIT_TO_ANY_INIT,
 	EXPORT_TO_INIT_EXIT,
 };
 
@@ -848,6 +852,7 @@ struct sectioncheck {
 	const char *fromsec[20];
 	const char *tosec[20];
 	enum mismatch mismatch;
+	const char *symbol_white_list[20];
 };
 
 const struct sectioncheck sectioncheck[] = {
@@ -857,80 +862,103 @@ const struct sectioncheck sectioncheck[] = {
 {
 	.fromsec = { TEXT_SECTIONS, NULL },
 	.tosec   = { ALL_INIT_SECTIONS, NULL },
-	.mismatch = TEXT_TO_INIT,
+	.mismatch = TEXT_TO_ANY_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 {
 	.fromsec = { DATA_SECTIONS, NULL },
-	.tosec   = { ALL_INIT_SECTIONS, NULL },
-	.mismatch = DATA_TO_INIT,
+	.tosec   = { ALL_XXXINIT_SECTIONS, NULL },
+	.mismatch = DATA_TO_ANY_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
+},
+{
+	.fromsec = { DATA_SECTIONS, NULL },
+	.tosec   = { INIT_SECTIONS, NULL },
+	.mismatch = DATA_TO_ANY_INIT,
+	.symbol_white_list = {
+		"*_template", "*_timer", "*_sht", "*_ops",
+		"*_probe", "*_probe_one", "*_console", NULL
+	},
 },
 {
 	.fromsec = { TEXT_SECTIONS, NULL },
 	.tosec   = { ALL_EXIT_SECTIONS, NULL },
-	.mismatch = TEXT_TO_EXIT,
+	.mismatch = TEXT_TO_ANY_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 {
 	.fromsec = { DATA_SECTIONS, NULL },
 	.tosec   = { ALL_EXIT_SECTIONS, NULL },
-	.mismatch = DATA_TO_EXIT,
+	.mismatch = DATA_TO_ANY_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference init code/data from devinit/cpuinit/meminit code/data */
 {
-	.fromsec = { DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, MEM_INIT_SECTIONS, NULL },
+	.fromsec = { ALL_XXXINIT_SECTIONS, NULL },
 	.tosec   = { INIT_SECTIONS, NULL },
-	.mismatch = XXXINIT_TO_INIT,
+	.mismatch = XXXINIT_TO_SOME_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference cpuinit code/data from meminit code/data */
 {
 	.fromsec = { MEM_INIT_SECTIONS, NULL },
 	.tosec   = { CPU_INIT_SECTIONS, NULL },
-	.mismatch = XXXINIT_TO_INIT,
+	.mismatch = XXXINIT_TO_SOME_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference meminit code/data from cpuinit code/data */
 {
 	.fromsec = { CPU_INIT_SECTIONS, NULL },
 	.tosec   = { MEM_INIT_SECTIONS, NULL },
-	.mismatch = XXXINIT_TO_INIT,
+	.mismatch = XXXINIT_TO_SOME_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference exit code/data from devexit/cpuexit/memexit code/data */
 {
-	.fromsec = { DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS, NULL },
+	.fromsec = { ALL_XXXEXIT_SECTIONS, NULL },
 	.tosec   = { EXIT_SECTIONS, NULL },
-	.mismatch = XXXEXIT_TO_EXIT,
+	.mismatch = XXXEXIT_TO_SOME_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference cpuexit code/data from memexit code/data */
 {
 	.fromsec = { MEM_EXIT_SECTIONS, NULL },
 	.tosec   = { CPU_EXIT_SECTIONS, NULL },
-	.mismatch = XXXEXIT_TO_EXIT,
+	.mismatch = XXXEXIT_TO_SOME_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not reference memexit code/data from cpuexit code/data */
 {
 	.fromsec = { CPU_EXIT_SECTIONS, NULL },
 	.tosec   = { MEM_EXIT_SECTIONS, NULL },
-	.mismatch = XXXEXIT_TO_EXIT,
+	.mismatch = XXXEXIT_TO_SOME_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not use exit code/data from init code */
 {
 	.fromsec = { ALL_INIT_SECTIONS, NULL },
 	.tosec   = { ALL_EXIT_SECTIONS, NULL },
-	.mismatch = INIT_TO_EXIT,
+	.mismatch = ANY_INIT_TO_ANY_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not use init code/data from exit code */
 {
 	.fromsec = { ALL_EXIT_SECTIONS, NULL },
 	.tosec   = { ALL_INIT_SECTIONS, NULL },
-	.mismatch = EXIT_TO_INIT,
+	.mismatch = ANY_EXIT_TO_ANY_INIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 },
 /* Do not export init/exit functions or data */
 {
 	.fromsec = { "__ksymtab*", NULL },
 	.tosec   = { INIT_SECTIONS, EXIT_SECTIONS, NULL },
-	.mismatch = EXPORT_TO_INIT_EXIT
+	.mismatch = EXPORT_TO_INIT_EXIT,
+	.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
 }
 };
 
-static int section_mismatch(const char *fromsec, const char *tosec)
+static const struct sectioncheck *section_mismatch(
+		const char *fromsec, const char *tosec)
 {
 	int i;
 	int elems = sizeof(sectioncheck) / sizeof(struct sectioncheck);
@@ -939,10 +967,10 @@ static int section_mismatch(const char *fromsec, const char *tosec)
 	for (i = 0; i < elems; i++) {
 		if (match(fromsec, check->fromsec) &&
 		    match(tosec, check->tosec))
-			return check->mismatch;
+			return check;
 		check++;
 	}
-	return NO_MISMATCH;
+	return NULL;
 }
 
 /**
@@ -961,7 +989,7 @@ static int section_mismatch(const char *fromsec, const char *tosec)
  * Pattern 2:
  *   Many drivers utilise a *driver container with references to
  *   add, remove, probe functions etc.
- *   These functions may often be marked __init and we do not want to
+ *   These functions may often be marked __devinit and we do not want to
  *   warn here.
  *   the pattern is identified by:
  *   tosec   = init or exit section
@@ -982,7 +1010,8 @@ static int section_mismatch(const char *fromsec, const char *tosec)
  *   refsymname = __init_begin, _sinittext, _einittext
  *
  **/
-static int secref_whitelist(const char *fromsec, const char *fromsym,
+static int secref_whitelist(const struct sectioncheck *mismatch,
+			    const char *fromsec, const char *fromsym,
 			    const char *tosec, const char *tosym)
 {
 	/* Check for pattern 1 */
@@ -994,7 +1023,7 @@ static int secref_whitelist(const char *fromsec, const char *fromsym,
 	/* Check for pattern 2 */
 	if (match(tosec, init_exit_sections) &&
 	    match(fromsec, data_sections) &&
-	    match(fromsym, symbol_white_list))
+	    match(fromsym, mismatch->symbol_white_list))
 		return 0;
 
 	/* Check for pattern 3 */
@@ -1155,7 +1184,8 @@ static int is_function(Elf_Sym *sym)
  * Try to find symbols near it so user can find it.
  * Check whitelist before warning - it may be a false positive.
  */
-static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
+static void report_sec_mismatch(const char *modname,
+				const struct sectioncheck *mismatch,
                                 const char *fromsec,
                                 unsigned long long fromaddr,
                                 const char *fromsym,
@@ -1186,8 +1216,8 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 	     modname, fromsec, fromaddr, from, fromsym, from_p, to, tosec,
 	     tosym, to_p);
 
-	switch (mismatch) {
-	case TEXT_TO_INIT:
+	switch (mismatch->mismatch) {
+	case TEXT_TO_ANY_INIT:
 		fprintf(stderr,
 		"The function %s%s() references\n"
 		"the %s %s%s%s.\n"
@@ -1197,8 +1227,8 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		to, sec2annotation(tosec), tosym, to_p,
 		fromsym, sec2annotation(tosec), tosym);
 		break;
-	case DATA_TO_INIT: {
-		const char **s = symbol_white_list;
+	case DATA_TO_ANY_INIT: {
+		const char *const *s = mismatch->symbol_white_list;
 		fprintf(stderr,
 		"The variable %s references\n"
 		"the %s %s%s%s\n"
@@ -1211,15 +1241,15 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		fprintf(stderr, "\n");
 		break;
 	}
-	case TEXT_TO_EXIT:
+	case TEXT_TO_ANY_EXIT:
 		fprintf(stderr,
 		"The function %s() references a %s in an exit section.\n"
 		"Often the %s %s%s has valid usage outside the exit section\n"
 		"and the fix is to remove the %sannotation of %s.\n",
 		fromsym, to, to, tosym, to_p, sec2annotation(tosec), tosym);
 		break;
-	case DATA_TO_EXIT: {
-		const char **s = symbol_white_list;
+	case DATA_TO_ANY_EXIT: {
+		const char *const *s = mismatch->symbol_white_list;
 		fprintf(stderr,
 		"The variable %s references\n"
 		"the %s %s%s%s\n"
@@ -1232,8 +1262,8 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		fprintf(stderr, "\n");
 		break;
 	}
-	case XXXINIT_TO_INIT:
-	case XXXEXIT_TO_EXIT:
+	case XXXINIT_TO_SOME_INIT:
+	case XXXEXIT_TO_SOME_EXIT:
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
@@ -1243,7 +1273,7 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		to, sec2annotation(tosec), tosym, to_p,
 		tosym, fromsym, tosym);
 		break;
-	case INIT_TO_EXIT:
+	case ANY_INIT_TO_ANY_EXIT:
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
@@ -1256,7 +1286,7 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		to, sec2annotation(tosec), tosym, to_p,
 		sec2annotation(tosec), tosym, to_p);
 		break;
-	case EXIT_TO_INIT:
+	case ANY_EXIT_TO_ANY_INIT:
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
@@ -1275,8 +1305,6 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		"Fix this by removing the %sannotation of %s "
 		"or drop the export.\n",
 		tosym, sec2annotation(tosec), sec2annotation(tosec), tosym);
-	case NO_MISMATCH:
-		/* To get warnings on missing members */
 		break;
 	}
 	fprintf(stderr, "\n");
@@ -1286,11 +1314,11 @@ static void check_section_mismatch(const char *modname, struct elf_info *elf,
                                    Elf_Rela *r, Elf_Sym *sym, const char *fromsec)
 {
 	const char *tosec;
-	enum mismatch mismatch;
+	const struct sectioncheck *mismatch;
 
 	tosec = sec_name(elf, sym->st_shndx);
 	mismatch = section_mismatch(fromsec, tosec);
-	if (mismatch != NO_MISMATCH) {
+	if (mismatch) {
 		Elf_Sym *to;
 		Elf_Sym *from;
 		const char *tosym;
@@ -1302,7 +1330,8 @@ static void check_section_mismatch(const char *modname, struct elf_info *elf,
 		tosym = sym_name(elf, to);
 
 		/* check whitelist - we may ignore it */
-		if (secref_whitelist(fromsec, fromsym, tosec, tosym)) {
+		if (secref_whitelist(mismatch,
+					fromsec, fromsym, tosec, tosym)) {
 			report_sec_mismatch(modname, mismatch,
 			   fromsec, r->r_offset, fromsym,
 			   is_function(from), tosec, tosym,
@@ -1318,7 +1347,7 @@ static unsigned int *reloc_location(struct elf_info *elf,
 	int section = sechdr->sh_info;
 
 	return (void *)elf->hdr + sechdrs[section].sh_offset +
-		(r->r_offset - sechdrs[section].sh_addr);
+		r->r_offset - sechdrs[section].sh_addr;
 }
 
 static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
diff --git a/scripts/namespace.pl b/scripts/namespace.pl
index c6e88c652c2..361d0f71184 100755
--- a/scripts/namespace.pl
+++ b/scripts/namespace.pl
@@ -175,12 +175,11 @@ sub do_nm
 	}
 	if (! -e "$source.c" && ! -e "$source.S") {
 		# No obvious source, exclude the object if it is conglomerate
-		if (! open(OBJDUMPDATA, "$objdump $basename|")) {
-			printf STDERR "$objdump $fullname failed $!\n";
-			return;
-		}
+	        open(my $objdumpdata, "$objdump $basename|")
+		    or die "$objdump $fullname failed $!\n";
+
 		my $comment;
-		while (<OBJDUMPDATA>) {
+		while (<$objdumpdata>) {
 			chomp();
 			if (/^In archive/) {
 				# Archives are always conglomerate
@@ -190,18 +189,18 @@ sub do_nm
 			next if (! /^[ 0-9a-f]{5,} /);
 			$comment .= substr($_, 43);
 		}
-		close(OBJDUMPDATA);
+		close($objdumpdata);
+
 		if (!defined($comment) || $comment !~ /GCC\:.*GCC\:/m) {
 			printf STDERR "No source file found for $fullname\n";
 		}
 		return;
 	}
-	if (! open(NMDATA, "$nm $basename|")) {
-		printf STDERR "$nm $fullname failed $!\n";
-		return;
-	}
+	open (my $nmdata, "$nm $basename|")
+	    or die "$nm $fullname failed $!\n";
+
 	my @nmdata;
-	while (<NMDATA>) {
+	while (<$nmdata>) {
 		chop;
 		($type, $name) = (split(/ +/, $_, 3))[1..2];
 		# Expected types
@@ -268,7 +267,8 @@ sub do_nm
 			}
 		}
 	}
-	close(NMDATA);
+	close($nmdata);
+
 	if ($#nmdata < 0) {
 		if (
 			$fullname ne "lib/brlock.o"
@@ -316,8 +316,7 @@ sub drop_def
 
 sub list_multiply_defined
 {
-	my ($name, $module);
-	foreach $name (keys(%def)) {
+	foreach my $name (keys(%def)) {
 		if ($#{$def{$name}} > 0) {
 			# Special case for cond_syscall
 			if ($#{$def{$name}} == 1 && $name =~ /^sys_/ &&
@@ -333,8 +332,9 @@ sub list_multiply_defined
 				&drop_def("arch/x86/kernel/vsyscall-sysenter_32.o", $name);
 				next;
 			}
+
 			printf "$name is multiply defined in :-\n";
-			foreach $module (@{$def{$name}}) {
+			foreach my $module (@{$def{$name}}) {
 				printf "\t$module\n";
 			}
 		}
@@ -343,12 +343,13 @@ sub list_multiply_defined
 
 sub resolve_external_references
 {
-	my ($object, $type, $name, $i, $j, $kstrtab, $ksymtab, $export);
+	my ($kstrtab, $ksymtab, $export);
+
 	printf "\n";
-	foreach $object (keys(%nmdata)) {
+	foreach my $object (keys(%nmdata)) {
 		my $nmdata = $nmdata{$object};
-		for ($i = 0; $i <= $#{$nmdata}; ++$i) {
-			($type, $name) = split(' ', $nmdata->[$i], 2);
+		for (my $i = 0; $i <= $#{$nmdata}; ++$i) {
+			my ($type, $name) = split(' ', $nmdata->[$i], 2);
 			if ($type eq "U" || $type eq "w") {
 				if (exists($def{$name}) || exists($ksymtab{$name})) {
 					# add the owning object to the nmdata
@@ -357,7 +358,7 @@ sub resolve_external_references
 					$kstrtab = "R __kstrtab_$name";
 					$ksymtab = "R __ksymtab_$name";
 					$export = 0;
-					for ($j = 0; $j <= $#{$nmdata}; ++$j) {
+					for (my $j = 0; $j <= $#{$nmdata}; ++$j) {
 						if ($nmdata->[$j] eq $kstrtab ||
 						    $nmdata->[$j] eq $ksymtab) {
 							$export = 1;
@@ -424,11 +425,11 @@ sub resolve_external_references
 sub list_extra_externals
 {
 	my %noref = ();
-	my ($name, @module, $module, $export);
-	foreach $name (keys(%def)) {
+
+	foreach my $name (keys(%def)) {
 		if (! exists($ref{$name})) {
-			@module = @{$def{$name}};
-			foreach $module (@module) {
+			my @module = @{$def{$name}};
+			foreach my $module (@module) {
 				if (! exists($noref{$module})) {
 					$noref{$module} = [];
 				}
@@ -438,16 +439,16 @@ sub list_extra_externals
 	}
 	if (%noref) {
 		printf "\nExternally defined symbols with no external references\n";
-		foreach $module (sort(keys(%noref))) {
+		foreach my $module (sort(keys(%noref))) {
 			printf "  $module\n";
 			foreach (sort(@{$noref{$module}})) {
-				if (exists($export{$_})) {
-					$export = " (export only)";
-				}
-				else {
-					$export = "";
-				}
-				printf "    $_$export\n";
+			    my $export;
+			    if (exists($export{$_})) {
+				$export = " (export only)";
+			    } else {
+				$export = "";
+			    }
+			    printf "    $_$export\n";
 			}
 		}
 	}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 62fcc3a7f4d..d2c29b63add 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -44,7 +44,7 @@ rpm-pkg rpm: $(objtree)/kernel.spec FORCE
 	fi
 	$(MAKE) clean
 	$(PREV) ln -sf $(srctree) $(KERNELPATH)
-	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
+	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
 	$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
 	$(PREV) rm $(KERNELPATH)
 	rm -f $(objtree)/.scmversion
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 8b357b0bd25..07f2fbde2ab 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -18,6 +18,8 @@ create_package() {
 	cp debian/copyright "$pdir/usr/share/doc/$pname/"
 	cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
 	gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
+	sh -c "cd '$pdir'; find . -type f ! -path './DEBIAN/*' -printf '%P\0' \
+		| xargs -r0 md5sum > DEBIAN/md5sums"
 
 	# Fix ownership and permissions
 	chown -R root:root "$pdir"
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index fa27f3dac76..15440f55aef 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -39,7 +39,7 @@ if ! $PREBUILT; then
 echo "Source: kernel-$__KERNELRELEASE.tar.gz"
 fi
 
-echo "BuildRoot: /var/tmp/%{name}-%{PACKAGE_VERSION}-root"
+echo "BuildRoot: %{_tmppath}/%{name}-%{PACKAGE_VERSION}-root"
 echo "Provides: $PROVIDES"
 echo "%define __spec_install_post /usr/lib/rpm/brp-compress || :"
 echo "%define debug_package %{nil}"
diff --git a/scripts/profile2linkerlist.pl b/scripts/profile2linkerlist.pl
index cb4260ebdb9..6943fa7cc95 100644
--- a/scripts/profile2linkerlist.pl
+++ b/scripts/profile2linkerlist.pl
@@ -7,15 +7,13 @@
 # usage:
 #	 readprofile | sort -rn | perl profile2linkerlist.pl > functionlist
 #
+use strict;
 
 while (<>) {
   my $line = $_;
 
   $_ =~ /\W*[0-9]+\W*([a-zA-Z\_0-9]+)\W*[0-9]+/;
 
-  if ( ($line =~ /unknown/) || ($line =~ /total/)) {
-
-  } else {
-    print "*(.text.$1)\n";
-  }
+  print "*(.text.$1)\n"
+      unless ($line =~ /unknown/) || ($line =~ /total/);
 }
diff --git a/scripts/rt-tester/rt-tester.py b/scripts/rt-tester/rt-tester.py
index 4c79660793c..44423b4dcb8 100644
--- a/scripts/rt-tester/rt-tester.py
+++ b/scripts/rt-tester/rt-tester.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 #
 # rt-mutex tester
 #
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 46989b88d73..64a9cb5556c 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,73 +10,162 @@
 #
 
 usage() {
-	echo "Usage: $0 [srctree]" >&2
+	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
 	exit 1
 }
 
-cd "${1:-.}" || usage
+scm_only=false
+srctree=.
+if test "$1" = "--save-scmversion"; then
+	scm_only=true
+	shift
+fi
+if test $# -gt 0; then
+	srctree=$1
+	shift
+fi
+if test $# -gt 0 -o ! -d "$srctree"; then
+	usage
+fi
 
-# Check for git and a git repo.
-if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
+scm_version()
+{
+	local short
+	short=false
 
-	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
-	# because this version is defined in the top level Makefile.
-	if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+	cd "$srctree"
+	if test -e .scmversion; then
+		cat .scmversion
+		return
+	fi
+	if test "$1" = "--short"; then
+		short=true
+	fi
 
-		# If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
-		# we pretty print it.
-		if atag="`git describe 2>/dev/null`"; then
-			echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+	# Check for git and a git repo.
+	if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
+
+		# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore
+		# it, because this version is defined in the top level Makefile.
+		if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+			# If only the short version is requested, don't bother
+			# running further git commands
+			if $short; then
+				echo "+"
+				return
+			fi
+			# If we are past a tagged commit (like
+			# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
+			if atag="`git describe 2>/dev/null`"; then
+				echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+			# If we don't have a tag at all we print -g{commitish}.
+			else
+				printf '%s%s' -g $head
+			fi
+		fi
 
-		# If we don't have a tag at all we print -g{commitish}.
-		else
-			printf '%s%s' -g $head
+		# Is this git on svn?
+		if git config --get svn-remote.svn.url >/dev/null; then
+			printf -- '-svn%s' "`git svn find-rev $head`"
 		fi
-	fi
 
-	# Is this git on svn?
-	if git config --get svn-remote.svn.url >/dev/null; then
-	        printf -- '-svn%s' "`git svn find-rev $head`"
-	fi
+		# Update index only on r/w media
+		[ -w . ] && git update-index --refresh --unmerged > /dev/null
 
-	# Update index only on r/w media
-	[ -w . ] && git update-index --refresh --unmerged > /dev/null
+		# Check for uncommitted changes
+		if git diff-index --name-only HEAD | grep -v "^scripts/package" \
+		    | read dummy; then
+			printf '%s' -dirty
+		fi
 
-	# Check for uncommitted changes
-	if git diff-index --name-only HEAD | grep -v "^scripts/package" \
-	    | read dummy; then
-		printf '%s' -dirty
+		# All done with git
+		return
 	fi
 
-	# All done with git
-	exit
-fi
+	# Check for mercurial and a mercurial repo.
+	if hgid=`hg id 2>/dev/null`; then
+		tag=`printf '%s' "$hgid" | cut -d' ' -f2`
 
-# Check for mercurial and a mercurial repo.
-if hgid=`hg id 2>/dev/null`; then
-	tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+		# Do we have an untagged version?
+		if [ -z "$tag" -o "$tag" = tip ]; then
+			id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
+			printf '%s%s' -hg "$id"
+		fi
+
+		# Are there uncommitted changes?
+		# These are represented by + after the changeset id.
+		case "$hgid" in
+			*+|*+\ *) printf '%s' -dirty ;;
+		esac
 
-	# Do we have an untagged version?
-	if [ -z "$tag" -o "$tag" = tip ]; then
-		id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
-		printf '%s%s' -hg "$id"
+		# All done with mercurial
+		return
 	fi
 
-	# Are there uncommitted changes?
-	# These are represented by + after the changeset id.
-	case "$hgid" in
-		*+|*+\ *) printf '%s' -dirty ;;
-	esac
+	# Check for svn and a svn repo.
+	if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
+		rev=`echo $rev | awk '{print $NF}'`
+		printf -- '-svn%s' "$rev"
 
-	# All done with mercurial
+		# All done with svn
+		return
+	fi
+}
+
+collect_files()
+{
+	local file res
+
+	for file; do
+		case "$file" in
+		*\~*)
+			continue
+			;;
+		esac
+		if test -e "$file"; then
+			res="$res$(cat "$file")"
+		fi
+	done
+	echo "$res"
+}
+
+if $scm_only; then
+	if test ! -e .scmversion; then
+		res=$(scm_version)
+		echo "$res" >.scmversion
+	fi
 	exit
 fi
 
-# Check for svn and a svn repo.
-if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
-	rev=`echo $rev | awk '{print $NF}'`
-	printf -- '-svn%s' "$rev"
+if test -e include/config/auto.conf; then
+	. include/config/auto.conf
+else
+	echo "Error: kernelrelease not valid - run 'make prepare' to update it"
+	exit 1
+fi
 
-	# All done with svn
-	exit
+# localversion* files in the build and source directory
+res="$(collect_files localversion*)"
+if test ! "$srctree" -ef .; then
+	res="$res$(collect_files "$srctree"/localversion*)"
+fi
+
+# CONFIG_LOCALVERSION and LOCALVERSION (if set)
+res="${res}${CONFIG_LOCALVERSION}${LOCALVERSION}"
+
+# scm version string if not at a tagged commit
+if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then
+	# full scm version string
+	res="$res$(scm_version)"
+else
+	# apped a plus sign if the repository is not in a clean tagged
+	# state and  LOCALVERSION= is not specified
+	if test "${LOCALVERSION+set}" != "set"; then
+		scm=$(scm_version --short)
+		res="$res${scm:++}"
+	fi
 fi
+
+echo "$res"
diff --git a/scripts/show_delta b/scripts/show_delta
index 48a706ab3d0..17df3051747 100755
--- a/scripts/show_delta
+++ b/scripts/show_delta
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 #
 # show_deltas: Read list of printk messages instrumented with
 # time data, and format with time deltas.
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 1a0c44d7c4a..8509bb51293 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -5,7 +5,7 @@
 # mode may be any of: tags, TAGS, cscope
 #
 # Uses the following environment variables:
-# ARCH, SUBARCH, srctree, src, obj
+# ARCH, SUBARCH, SRCARCH, srctree, src, obj
 
 if [ "$KBUILD_VERBOSE" = "1" ]; then
 	set -x
@@ -17,28 +17,48 @@ ignore="( -name SCCS -o -name BitKeeper -o -name .svn -o \
           -name .git )                                   \
           -prune -o"
 
-# Do not use full path is we do not use O=.. builds
+# Do not use full path if we do not use O=.. builds
+# Use make O=. {tags|cscope}
+# to force full paths for a non-O= build
 if [ "${KBUILD_SRC}" = "" ]; then
 	tree=
 else
 	tree=${srctree}/
 fi
 
+# Find all available archs
+find_all_archs()
+{
+	ALLSOURCE_ARCHS=""
+	for arch in `ls ${tree}arch`; do
+		ALLSOURCE_ARCHS="${ALLSOURCE_ARCHS} "${arch##\/}
+	done
+}
+
 # Detect if ALLSOURCE_ARCHS is set. If not, we assume SRCARCH
 if [ "${ALLSOURCE_ARCHS}" = "" ]; then
 	ALLSOURCE_ARCHS=${SRCARCH}
+elif [ "${ALLSOURCE_ARCHS}" = "all" ]; then
+	find_all_archs
 fi
 
 # find sources in arch/$ARCH
 find_arch_sources()
 {
-	find ${tree}arch/$1 $ignore -name "$2" -print;
+	for i in $archincludedir; do
+		prune="$prune -wholename $i -prune -o"
+	done
+	find ${tree}arch/$1 $ignore $prune -name "$2" -print;
 }
 
 # find sources in arch/$1/include
 find_arch_include_sources()
 {
-	find ${tree}arch/$1/include $ignore -name "$2" -print;
+	include=$(find ${tree}arch/$1/ -name include -type d);
+	if [ -n "$include" ]; then
+		archincludedir="$archincludedir $include"
+		find $include $ignore -name "$2" -print;
+	fi
 }
 
 # find sources in include/
@@ -63,14 +83,15 @@ find_sources()
 
 all_sources()
 {
-	for arch in $ALLSOURCE_ARCHS
-	do
-		find_sources $arch '*.[chS]'
-	done
+	find_arch_include_sources ${SRCARCH} '*.[chS]'
 	if [ ! -z "$archinclude" ]; then
 		find_arch_include_sources $archinclude '*.[chS]'
 	fi
 	find_include_sources '*.[chS]'
+	for arch in $ALLSOURCE_ARCHS
+	do
+		find_sources $arch '*.[chS]'
+	done
 	find_other_sources '*.[chS]'
 }
 
@@ -89,13 +110,7 @@ all_defconfigs()
 
 docscope()
 {
-	# always use absolute paths for cscope, as recommended by cscope
-	# upstream
-	case "$tree" in
-		/*) ;;
-		*) tree=$PWD/$tree ;;
-	esac
-	(cd /; echo \-k; echo \-q; all_sources) > cscope.files
+	(echo \-k; echo \-q; all_sources) > cscope.files
 	cscope -b -f cscope.out
 }
 
diff --git a/security/Kconfig b/security/Kconfig
index 226b9556b25..bd72ae62349 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -140,6 +140,7 @@ config LSM_MMAP_MIN_ADDR
 source security/selinux/Kconfig
 source security/smack/Kconfig
 source security/tomoyo/Kconfig
+source security/apparmor/Kconfig
 
 source security/integrity/ima/Kconfig
 
@@ -148,6 +149,7 @@ choice
 	default DEFAULT_SECURITY_SELINUX if SECURITY_SELINUX
 	default DEFAULT_SECURITY_SMACK if SECURITY_SMACK
 	default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
+	default DEFAULT_SECURITY_APPARMOR if SECURITY_APPARMOR
 	default DEFAULT_SECURITY_DAC
 
 	help
@@ -163,6 +165,9 @@ choice
 	config DEFAULT_SECURITY_TOMOYO
 		bool "TOMOYO" if SECURITY_TOMOYO=y
 
+	config DEFAULT_SECURITY_APPARMOR
+		bool "AppArmor" if SECURITY_APPARMOR=y
+
 	config DEFAULT_SECURITY_DAC
 		bool "Unix Discretionary Access Controls"
 
@@ -173,6 +178,7 @@ config DEFAULT_SECURITY
 	default "selinux" if DEFAULT_SECURITY_SELINUX
 	default "smack" if DEFAULT_SECURITY_SMACK
 	default "tomoyo" if DEFAULT_SECURITY_TOMOYO
+	default "apparmor" if DEFAULT_SECURITY_APPARMOR
 	default "" if DEFAULT_SECURITY_DAC
 
 endmenu
diff --git a/security/Makefile b/security/Makefile
index da20a193c8d..8bb0fe9e1ca 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_KEYS)			+= keys/
 subdir-$(CONFIG_SECURITY_SELINUX)	+= selinux
 subdir-$(CONFIG_SECURITY_SMACK)		+= smack
 subdir-$(CONFIG_SECURITY_TOMOYO)        += tomoyo
+subdir-$(CONFIG_SECURITY_APPARMOR)	+= apparmor
 
 # always enable default capabilities
 obj-y					+= commoncap.o
@@ -19,6 +20,7 @@ obj-$(CONFIG_SECURITY_SELINUX)		+= selinux/built-in.o
 obj-$(CONFIG_SECURITY_SMACK)		+= smack/built-in.o
 obj-$(CONFIG_AUDIT)			+= lsm_audit.o
 obj-$(CONFIG_SECURITY_TOMOYO)		+= tomoyo/built-in.o
+obj-$(CONFIG_SECURITY_APPARMOR)		+= apparmor/built-in.o
 obj-$(CONFIG_CGROUP_DEVICE)		+= device_cgroup.o
 
 # Object integrity file lists
diff --git a/security/apparmor/.gitignore b/security/apparmor/.gitignore
new file mode 100644
index 00000000000..0a0a99f3b08
--- /dev/null
+++ b/security/apparmor/.gitignore
@@ -0,0 +1,5 @@
+#
+# Generated include files
+#
+af_names.h
+capability_names.h
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
new file mode 100644
index 00000000000..72555b9ca7d
--- /dev/null
+++ b/security/apparmor/Kconfig
@@ -0,0 +1,31 @@
+config SECURITY_APPARMOR
+	bool "AppArmor support"
+	depends on SECURITY
+	select AUDIT
+	select SECURITY_PATH
+	select SECURITYFS
+	select SECURITY_NETWORK
+	default n
+	help
+	  This enables the AppArmor security module.
+	  Required userspace tools (if they are not included in your
+	  distribution) and further information may be found at
+	  http://apparmor.wiki.kernel.org
+
+	  If you are unsure how to answer this question, answer N.
+
+config SECURITY_APPARMOR_BOOTPARAM_VALUE
+	int "AppArmor boot parameter default value"
+	depends on SECURITY_APPARMOR
+	range 0 1
+	default 1
+	help
+	  This option sets the default value for the kernel parameter
+	  'apparmor', which allows AppArmor to be enabled or disabled
+          at boot.  If this option is set to 0 (zero), the AppArmor
+	  kernel parameter will default to 0, disabling AppArmor at
+	  boot.  If this option is set to 1 (one), the AppArmor
+	  kernel parameter will default to 1, enabling AppArmor at
+	  boot.
+
+	  If you are unsure how to answer this question, answer 1.
diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile
new file mode 100644
index 00000000000..f204869399e
--- /dev/null
+++ b/security/apparmor/Makefile
@@ -0,0 +1,24 @@
+# Makefile for AppArmor Linux Security Module
+#
+obj-$(CONFIG_SECURITY_APPARMOR) += apparmor.o
+
+apparmor-y := apparmorfs.o audit.o capability.o context.o ipc.o lib.o match.o \
+              path.o domain.o policy.o policy_unpack.o procattr.o lsm.o \
+              resource.o sid.o file.o
+
+clean-files: capability_names.h af_names.h
+
+quiet_cmd_make-caps = GEN     $@
+cmd_make-caps = echo "static const char *capability_names[] = {" > $@ ; sed -n -e "/CAP_FS_MASK/d" -e "s/^\#define[ \\t]\\+CAP_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\$$/[\\2]  = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
+
+quiet_cmd_make-rlim = GEN     $@
+cmd_make-rlim = echo "static const char *rlim_names[] = {" > $@ ; sed -n --e "/AF_MAX/d" -e "s/^\# \\?define[ \\t]\\+RLIMIT_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/[\\2]  = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@ ; echo "static const int rlim_map[] = {" >> $@ ; sed -n -e "/AF_MAX/d" -e "s/^\# \\?define[ \\t]\\+\\(RLIMIT_[A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/\\1,/p" $< >> $@ ; echo "};" >> $@
+
+$(obj)/capability.o : $(obj)/capability_names.h
+$(obj)/resource.o : $(obj)/rlim_names.h
+$(obj)/capability_names.h : $(srctree)/include/linux/capability.h
+	$(call cmd,make-caps)
+$(obj)/af_names.h : $(srctree)/include/linux/socket.h
+	$(call cmd,make-af)
+$(obj)/rlim_names.h : $(srctree)/include/asm-generic/resource.h
+	$(call cmd,make-rlim)
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
new file mode 100644
index 00000000000..7320331b44a
--- /dev/null
+++ b/security/apparmor/apparmorfs.c
@@ -0,0 +1,239 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /sys/kernel/security/apparmor interface functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/security.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/namei.h>
+
+#include "include/apparmor.h"
+#include "include/apparmorfs.h"
+#include "include/audit.h"
+#include "include/context.h"
+#include "include/policy.h"
+
+/**
+ * aa_simple_write_to_buffer - common routine for getting policy from user
+ * @op: operation doing the user buffer copy
+ * @userbuf: user buffer to copy data from  (NOT NULL)
+ * @alloc_size: size of user buffer
+ * @copy_size: size of data to copy from user buffer
+ * @pos: position write is at in the file (NOT NULL)
+ *
+ * Returns: kernel buffer containing copy of user buffer data or an
+ *          ERR_PTR on failure.
+ */
+static char *aa_simple_write_to_buffer(int op, const char __user *userbuf,
+				       size_t alloc_size, size_t copy_size,
+				       loff_t *pos)
+{
+	char *data;
+
+	if (*pos != 0)
+		/* only writes from pos 0, that is complete writes */
+		return ERR_PTR(-ESPIPE);
+
+	/*
+	 * Don't allow profile load/replace/remove from profiles that don't
+	 * have CAP_MAC_ADMIN
+	 */
+	if (!aa_may_manage_policy(op))
+		return ERR_PTR(-EACCES);
+
+	/* freed by caller to simple_write_to_buffer */
+	data = kvmalloc(alloc_size);
+	if (data == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	if (copy_from_user(data, userbuf, copy_size)) {
+		kvfree(data);
+		return ERR_PTR(-EFAULT);
+	}
+
+	return data;
+}
+
+
+/* .load file hook fn to load policy */
+static ssize_t profile_load(struct file *f, const char __user *buf, size_t size,
+			    loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	data = aa_simple_write_to_buffer(OP_PROF_LOAD, buf, size, size, pos);
+
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		error = aa_replace_profiles(data, size, PROF_ADD);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_load = {
+	.write = profile_load
+};
+
+/* .replace file hook fn to load and/or replace policy */
+static ssize_t profile_replace(struct file *f, const char __user *buf,
+			       size_t size, loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	data = aa_simple_write_to_buffer(OP_PROF_REPL, buf, size, size, pos);
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		error = aa_replace_profiles(data, size, PROF_REPLACE);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_replace = {
+	.write = profile_replace
+};
+
+/* .remove file hook fn to remove loaded policy */
+static ssize_t profile_remove(struct file *f, const char __user *buf,
+			      size_t size, loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	/*
+	 * aa_remove_profile needs a null terminated string so 1 extra
+	 * byte is allocated and the copied data is null terminated.
+	 */
+	data = aa_simple_write_to_buffer(OP_PROF_RM, buf, size + 1, size, pos);
+
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		data[size] = 0;
+		error = aa_remove_profiles(data, size);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_remove = {
+	.write = profile_remove
+};
+
+/** Base file system setup **/
+
+static struct dentry *aa_fs_dentry __initdata;
+
+static void __init aafs_remove(const char *name)
+{
+	struct dentry *dentry;
+
+	dentry = lookup_one_len(name, aa_fs_dentry, strlen(name));
+	if (!IS_ERR(dentry)) {
+		securityfs_remove(dentry);
+		dput(dentry);
+	}
+}
+
+/**
+ * aafs_create - create an entry in the apparmor filesystem
+ * @name: name of the entry (NOT NULL)
+ * @mask: file permission mask of the file
+ * @fops: file operations for the file (NOT NULL)
+ *
+ * Used aafs_remove to remove entries created with this fn.
+ */
+static int __init aafs_create(const char *name, int mask,
+			      const struct file_operations *fops)
+{
+	struct dentry *dentry;
+
+	dentry = securityfs_create_file(name, S_IFREG | mask, aa_fs_dentry,
+					NULL, fops);
+
+	return IS_ERR(dentry) ? PTR_ERR(dentry) : 0;
+}
+
+/**
+ * aa_destroy_aafs - cleanup and free aafs
+ *
+ * releases dentries allocated by aa_create_aafs
+ */
+void __init aa_destroy_aafs(void)
+{
+	if (aa_fs_dentry) {
+		aafs_remove(".remove");
+		aafs_remove(".replace");
+		aafs_remove(".load");
+
+		securityfs_remove(aa_fs_dentry);
+		aa_fs_dentry = NULL;
+	}
+}
+
+/**
+ * aa_create_aafs - create the apparmor security filesystem
+ *
+ * dentries created here are released by aa_destroy_aafs
+ *
+ * Returns: error on failure
+ */
+int __init aa_create_aafs(void)
+{
+	int error;
+
+	if (!apparmor_initialized)
+		return 0;
+
+	if (aa_fs_dentry) {
+		AA_ERROR("%s: AppArmor securityfs already exists\n", __func__);
+		return -EEXIST;
+	}
+
+	aa_fs_dentry = securityfs_create_dir("apparmor", NULL);
+	if (IS_ERR(aa_fs_dentry)) {
+		error = PTR_ERR(aa_fs_dentry);
+		aa_fs_dentry = NULL;
+		goto error;
+	}
+
+	error = aafs_create(".load", 0640, &aa_fs_profile_load);
+	if (error)
+		goto error;
+	error = aafs_create(".replace", 0640, &aa_fs_profile_replace);
+	if (error)
+		goto error;
+	error = aafs_create(".remove", 0640, &aa_fs_profile_remove);
+	if (error)
+		goto error;
+
+	/* TODO: add support for apparmorfs_null and apparmorfs_mnt */
+
+	/* Report that AppArmor fs is enabled */
+	aa_info_message("AppArmor Filesystem Enabled");
+	return 0;
+
+error:
+	aa_destroy_aafs();
+	AA_ERROR("Error creating AppArmor securityfs\n");
+	return error;
+}
+
+fs_initcall(aa_create_aafs);
diff --git a/security/apparmor/audit.c b/security/apparmor/audit.c
new file mode 100644
index 00000000000..96502b22b26
--- /dev/null
+++ b/security/apparmor/audit.c
@@ -0,0 +1,215 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor auditing functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/audit.h>
+#include <linux/socket.h>
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/policy.h"
+
+const char *op_table[] = {
+	"null",
+
+	"sysctl",
+	"capable",
+
+	"unlink",
+	"mkdir",
+	"rmdir",
+	"mknod",
+	"truncate",
+	"link",
+	"symlink",
+	"rename_src",
+	"rename_dest",
+	"chmod",
+	"chown",
+	"getattr",
+	"open",
+
+	"file_perm",
+	"file_lock",
+	"file_mmap",
+	"file_mprotect",
+
+	"create",
+	"post_create",
+	"bind",
+	"connect",
+	"listen",
+	"accept",
+	"sendmsg",
+	"recvmsg",
+	"getsockname",
+	"getpeername",
+	"getsockopt",
+	"setsockopt",
+	"socket_shutdown",
+
+	"ptrace",
+
+	"exec",
+	"change_hat",
+	"change_profile",
+	"change_onexec",
+
+	"setprocattr",
+	"setrlimit",
+
+	"profile_replace",
+	"profile_load",
+	"profile_remove"
+};
+
+const char *audit_mode_names[] = {
+	"normal",
+	"quiet_denied",
+	"quiet",
+	"noquiet",
+	"all"
+};
+
+static char *aa_audit_type[] = {
+	"AUDIT",
+	"ALLOWED",
+	"DENIED",
+	"HINT",
+	"STATUS",
+	"ERROR",
+	"KILLED"
+};
+
+/*
+ * Currently AppArmor auditing is fed straight into the audit framework.
+ *
+ * TODO:
+ * netlink interface for complain mode
+ * user auditing, - send user auditing to netlink interface
+ * system control of whether user audit messages go to system log
+ */
+
+/**
+ * audit_base - core AppArmor function.
+ * @ab: audit buffer to fill (NOT NULL)
+ * @ca: audit structure containing data to audit (NOT NULL)
+ *
+ * Record common AppArmor audit data from @sa
+ */
+static void audit_pre(struct audit_buffer *ab, void *ca)
+{
+	struct common_audit_data *sa = ca;
+	struct task_struct *tsk = sa->tsk ? sa->tsk : current;
+
+	if (aa_g_audit_header) {
+		audit_log_format(ab, "apparmor=");
+		audit_log_string(ab, aa_audit_type[sa->aad.type]);
+	}
+
+	if (sa->aad.op) {
+		audit_log_format(ab, " operation=");
+		audit_log_string(ab, op_table[sa->aad.op]);
+	}
+
+	if (sa->aad.info) {
+		audit_log_format(ab, " info=");
+		audit_log_string(ab, sa->aad.info);
+		if (sa->aad.error)
+			audit_log_format(ab, " error=%d", sa->aad.error);
+	}
+
+	if (sa->aad.profile) {
+		struct aa_profile *profile = sa->aad.profile;
+		pid_t pid;
+		rcu_read_lock();
+		pid = tsk->real_parent->pid;
+		rcu_read_unlock();
+		audit_log_format(ab, " parent=%d", pid);
+		if (profile->ns != root_ns) {
+			audit_log_format(ab, " namespace=");
+			audit_log_untrustedstring(ab, profile->ns->base.hname);
+		}
+		audit_log_format(ab, " profile=");
+		audit_log_untrustedstring(ab, profile->base.hname);
+	}
+
+	if (sa->aad.name) {
+		audit_log_format(ab, " name=");
+		audit_log_untrustedstring(ab, sa->aad.name);
+	}
+}
+
+/**
+ * aa_audit_msg - Log a message to the audit subsystem
+ * @sa: audit event structure (NOT NULL)
+ * @cb: optional callback fn for type specific fields (MAYBE NULL)
+ */
+void aa_audit_msg(int type, struct common_audit_data *sa,
+		  void (*cb) (struct audit_buffer *, void *))
+{
+	sa->aad.type = type;
+	sa->lsm_pre_audit = audit_pre;
+	sa->lsm_post_audit = cb;
+	common_lsm_audit(sa);
+}
+
+/**
+ * aa_audit - Log a profile based audit event to the audit subsystem
+ * @type: audit type for the message
+ * @profile: profile to check against (NOT NULL)
+ * @gfp: allocation flags to use
+ * @sa: audit event (NOT NULL)
+ * @cb: optional callback fn for type specific fields (MAYBE NULL)
+ *
+ * Handle default message switching based off of audit mode flags
+ *
+ * Returns: error on failure
+ */
+int aa_audit(int type, struct aa_profile *profile, gfp_t gfp,
+	     struct common_audit_data *sa,
+	     void (*cb) (struct audit_buffer *, void *))
+{
+	BUG_ON(!profile);
+
+	if (type == AUDIT_APPARMOR_AUTO) {
+		if (likely(!sa->aad.error)) {
+			if (AUDIT_MODE(profile) != AUDIT_ALL)
+				return 0;
+			type = AUDIT_APPARMOR_AUDIT;
+		} else if (COMPLAIN_MODE(profile))
+			type = AUDIT_APPARMOR_ALLOWED;
+		else
+			type = AUDIT_APPARMOR_DENIED;
+	}
+	if (AUDIT_MODE(profile) == AUDIT_QUIET ||
+	    (type == AUDIT_APPARMOR_DENIED &&
+	     AUDIT_MODE(profile) == AUDIT_QUIET))
+		return sa->aad.error;
+
+	if (KILL_MODE(profile) && type == AUDIT_APPARMOR_DENIED)
+		type = AUDIT_APPARMOR_KILL;
+
+	if (!unconfined(profile))
+		sa->aad.profile = profile;
+
+	aa_audit_msg(type, sa, cb);
+
+	if (sa->aad.type == AUDIT_APPARMOR_KILL)
+		(void)send_sig_info(SIGKILL, NULL, sa->tsk ? sa->tsk : current);
+
+	if (sa->aad.type == AUDIT_APPARMOR_ALLOWED)
+		return complain_error(sa->aad.error);
+
+	return sa->aad.error;
+}
diff --git a/security/apparmor/capability.c b/security/apparmor/capability.c
new file mode 100644
index 00000000000..9982c48def4
--- /dev/null
+++ b/security/apparmor/capability.c
@@ -0,0 +1,141 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor capability mediation functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+
+#include "include/apparmor.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/policy.h"
+#include "include/audit.h"
+
+/*
+ * Table of capability names: we generate it from capabilities.h.
+ */
+#include "capability_names.h"
+
+struct audit_cache {
+	struct aa_profile *profile;
+	kernel_cap_t caps;
+};
+
+static DEFINE_PER_CPU(struct audit_cache, audit_cache);
+
+/**
+ * audit_cb - call back for capability components of audit struct
+ * @ab - audit buffer   (NOT NULL)
+ * @va - audit struct to audit data from  (NOT NULL)
+ */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	audit_log_format(ab, " capname=");
+	audit_log_untrustedstring(ab, capability_names[sa->u.cap]);
+}
+
+/**
+ * audit_caps - audit a capability
+ * @profile: profile confining task (NOT NULL)
+ * @task: task capability test was performed against (NOT NULL)
+ * @cap: capability tested
+ * @error: error code returned by test
+ *
+ * Do auditing of capability and handle, audit/complain/kill modes switching
+ * and duplicate message elimination.
+ *
+ * Returns: 0 or sa->error on success,  error code on failure
+ */
+static int audit_caps(struct aa_profile *profile, struct task_struct *task,
+		      int cap, int error)
+{
+	struct audit_cache *ent;
+	int type = AUDIT_APPARMOR_AUTO;
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, CAP);
+	sa.tsk = task;
+	sa.u.cap = cap;
+	sa.aad.op = OP_CAPABLE;
+	sa.aad.error = error;
+
+	if (likely(!error)) {
+		/* test if auditing is being forced */
+		if (likely((AUDIT_MODE(profile) != AUDIT_ALL) &&
+			   !cap_raised(profile->caps.audit, cap)))
+			return 0;
+		type = AUDIT_APPARMOR_AUDIT;
+	} else if (KILL_MODE(profile) ||
+		   cap_raised(profile->caps.kill, cap)) {
+		type = AUDIT_APPARMOR_KILL;
+	} else if (cap_raised(profile->caps.quiet, cap) &&
+		   AUDIT_MODE(profile) != AUDIT_NOQUIET &&
+		   AUDIT_MODE(profile) != AUDIT_ALL) {
+		/* quiet auditing */
+		return error;
+	}
+
+	/* Do simple duplicate message elimination */
+	ent = &get_cpu_var(audit_cache);
+	if (profile == ent->profile && cap_raised(ent->caps, cap)) {
+		put_cpu_var(audit_cache);
+		if (COMPLAIN_MODE(profile))
+			return complain_error(error);
+		return error;
+	} else {
+		aa_put_profile(ent->profile);
+		ent->profile = aa_get_profile(profile);
+		cap_raise(ent->caps, cap);
+	}
+	put_cpu_var(audit_cache);
+
+	return aa_audit(type, profile, GFP_ATOMIC, &sa, audit_cb);
+}
+
+/**
+ * profile_capable - test if profile allows use of capability @cap
+ * @profile: profile being enforced    (NOT NULL, NOT unconfined)
+ * @cap: capability to test if allowed
+ *
+ * Returns: 0 if allowed else -EPERM
+ */
+static int profile_capable(struct aa_profile *profile, int cap)
+{
+	return cap_raised(profile->caps.allow, cap) ? 0 : -EPERM;
+}
+
+/**
+ * aa_capable - test permission to use capability
+ * @task: task doing capability test against (NOT NULL)
+ * @profile: profile confining @task (NOT NULL)
+ * @cap: capability to be tested
+ * @audit: whether an audit record should be generated
+ *
+ * Look up capability in profile capability set.
+ *
+ * Returns: 0 on success, or else an error code.
+ */
+int aa_capable(struct task_struct *task, struct aa_profile *profile, int cap,
+	       int audit)
+{
+	int error = profile_capable(profile, cap);
+
+	if (!audit) {
+		if (COMPLAIN_MODE(profile))
+			return complain_error(error);
+		return error;
+	}
+
+	return audit_caps(profile, task, cap, error);
+}
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
new file mode 100644
index 00000000000..8a9b5027c81
--- /dev/null
+++ b/security/apparmor/context.c
@@ -0,0 +1,216 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor functions used to manipulate object security
+ * contexts.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * the aa_task_cxt.profile, both of which are required and are not allowed
+ * to be NULL.  The aa_task_cxt is not reference counted and is unique
+ * to each cred (which is reference count).  The profile pointed to by
+ * the task_cxt is reference counted.
+ *
+ * TODO
+ * If a task uses change_hat it currently does not return to the old
+ * cred or task context but instead creates a new one.  Ideally the task
+ * should return to the previous cred if it has not been modified.
+ *
+ */
+
+#include "include/context.h"
+#include "include/policy.h"
+
+/**
+ * aa_alloc_task_context - allocate a new task_cxt
+ * @flags: gfp flags for allocation
+ *
+ * Returns: allocated buffer or NULL on failure
+ */
+struct aa_task_cxt *aa_alloc_task_context(gfp_t flags)
+{
+	return kzalloc(sizeof(struct aa_task_cxt), flags);
+}
+
+/**
+ * aa_free_task_context - free a task_cxt
+ * @cxt: task_cxt to free (MAYBE NULL)
+ */
+void aa_free_task_context(struct aa_task_cxt *cxt)
+{
+	if (cxt) {
+		aa_put_profile(cxt->profile);
+		aa_put_profile(cxt->previous);
+		aa_put_profile(cxt->onexec);
+
+		kzfree(cxt);
+	}
+}
+
+/**
+ * aa_dup_task_context - duplicate a task context, incrementing reference counts
+ * @new: a blank task context      (NOT NULL)
+ * @old: the task context to copy  (NOT NULL)
+ */
+void aa_dup_task_context(struct aa_task_cxt *new, const struct aa_task_cxt *old)
+{
+	*new = *old;
+	aa_get_profile(new->profile);
+	aa_get_profile(new->previous);
+	aa_get_profile(new->onexec);
+}
+
+/**
+ * aa_replace_current_profile - replace the current tasks profiles
+ * @profile: new profile  (NOT NULL)
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_replace_current_profile(struct aa_profile *profile)
+{
+	struct aa_task_cxt *cxt = current_cred()->security;
+	struct cred *new;
+	BUG_ON(!profile);
+
+	if (cxt->profile == profile)
+		return 0;
+
+	new  = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	if (unconfined(profile) || (cxt->profile->ns != profile->ns)) {
+		/* if switching to unconfined or a different profile namespace
+		 * clear out context state
+		 */
+		aa_put_profile(cxt->previous);
+		aa_put_profile(cxt->onexec);
+		cxt->previous = NULL;
+		cxt->onexec = NULL;
+		cxt->token = 0;
+	}
+	/* be careful switching cxt->profile, when racing replacement it
+	 * is possible that cxt->profile->replacedby is the reference keeping
+	 * @profile valid, so make sure to get its reference before dropping
+	 * the reference on cxt->profile */
+	aa_get_profile(profile);
+	aa_put_profile(cxt->profile);
+	cxt->profile = profile;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_set_current_onexec - set the tasks change_profile to happen onexec
+ * @profile: system profile to set at exec  (MAYBE NULL to clear value)
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_set_current_onexec(struct aa_profile *profile)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	aa_get_profile(profile);
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = profile;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_set_current_hat - set the current tasks hat
+ * @profile: profile to set as the current hat  (NOT NULL)
+ * @token: token value that must be specified to change from the hat
+ *
+ * Do switch of tasks hat.  If the task is currently in a hat
+ * validate the token to match.
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_set_current_hat(struct aa_profile *profile, u64 token)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+	BUG_ON(!profile);
+
+	cxt = new->security;
+	if (!cxt->previous) {
+		/* transfer refcount */
+		cxt->previous = cxt->profile;
+		cxt->token = token;
+	} else if (cxt->token == token) {
+		aa_put_profile(cxt->profile);
+	} else {
+		/* previous_profile && cxt->token != token */
+		abort_creds(new);
+		return -EACCES;
+	}
+	cxt->profile = aa_get_profile(aa_newest_version(profile));
+	/* clear exec on switching context */
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = NULL;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_restore_previous_profile - exit from hat context restoring the profile
+ * @token: the token that must be matched to exit hat context
+ *
+ * Attempt to return out of a hat to the previous profile.  The token
+ * must match the stored token value.
+ *
+ * Returns: 0 or error of failure
+ */
+int aa_restore_previous_profile(u64 token)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	if (cxt->token != token) {
+		abort_creds(new);
+		return -EACCES;
+	}
+	/* ignore restores when there is no saved profile */
+	if (!cxt->previous) {
+		abort_creds(new);
+		return 0;
+	}
+
+	aa_put_profile(cxt->profile);
+	cxt->profile = aa_newest_version(cxt->previous);
+	BUG_ON(!cxt->profile);
+	if (unlikely(cxt->profile != cxt->previous)) {
+		aa_get_profile(cxt->profile);
+		aa_put_profile(cxt->previous);
+	}
+	/* clear exec && prev information when restoring to previous context */
+	cxt->previous = NULL;
+	cxt->token = 0;
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = NULL;
+
+	commit_creds(new);
+	return 0;
+}
diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c
new file mode 100644
index 00000000000..c825c6e0b63
--- /dev/null
+++ b/security/apparmor/domain.c
@@ -0,0 +1,823 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy attachment and domain transitions
+ *
+ * Copyright (C) 2002-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/errno.h>
+#include <linux/fdtable.h>
+#include <linux/file.h>
+#include <linux/mount.h>
+#include <linux/syscalls.h>
+#include <linux/tracehook.h>
+#include <linux/personality.h>
+
+#include "include/audit.h"
+#include "include/apparmorfs.h"
+#include "include/context.h"
+#include "include/domain.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+/**
+ * aa_free_domain_entries - free entries in a domain table
+ * @domain: the domain table to free  (MAYBE NULL)
+ */
+void aa_free_domain_entries(struct aa_domain *domain)
+{
+	int i;
+	if (domain) {
+		if (!domain->table)
+			return;
+
+		for (i = 0; i < domain->size; i++)
+			kzfree(domain->table[i]);
+		kzfree(domain->table);
+		domain->table = NULL;
+	}
+}
+
+/**
+ * may_change_ptraced_domain - check if can change profile on ptraced task
+ * @task: task we want to change profile of   (NOT NULL)
+ * @to_profile: profile to change to  (NOT NULL)
+ *
+ * Check if the task is ptraced and if so if the tracing task is allowed
+ * to trace the new domain
+ *
+ * Returns: %0 or error if change not allowed
+ */
+static int may_change_ptraced_domain(struct task_struct *task,
+				     struct aa_profile *to_profile)
+{
+	struct task_struct *tracer;
+	const struct cred *cred = NULL;
+	struct aa_profile *tracerp = NULL;
+	int error = 0;
+
+	rcu_read_lock();
+	tracer = tracehook_tracer_task(task);
+	if (tracer) {
+		/* released below */
+		cred = get_task_cred(tracer);
+		tracerp = aa_cred_profile(cred);
+	}
+	rcu_read_unlock();
+
+	/* not ptraced */
+	if (!tracer || unconfined(tracerp))
+		goto out;
+
+	error = aa_may_ptrace(tracer, tracerp, to_profile, PTRACE_MODE_ATTACH);
+
+out:
+	if (cred)
+		put_cred(cred);
+
+	return error;
+}
+
+/**
+ * change_profile_perms - find permissions for change_profile
+ * @profile: the current profile  (NOT NULL)
+ * @ns: the namespace being switched to  (NOT NULL)
+ * @name: the name of the profile to change to  (NOT NULL)
+ * @request: requested perms
+ * @start: state to start matching in
+ *
+ * Returns: permission set
+ */
+static struct file_perms change_profile_perms(struct aa_profile *profile,
+					      struct aa_namespace *ns,
+					      const char *name, u32 request,
+					      unsigned int start)
+{
+	struct file_perms perms;
+	struct path_cond cond = { };
+	unsigned int state;
+
+	if (unconfined(profile)) {
+		perms.allow = AA_MAY_CHANGE_PROFILE | AA_MAY_ONEXEC;
+		perms.audit = perms.quiet = perms.kill = 0;
+		return perms;
+	} else if (!profile->file.dfa) {
+		return nullperms;
+	} else if ((ns == profile->ns)) {
+		/* try matching against rules with out namespace prepended */
+		aa_str_perms(profile->file.dfa, start, name, &cond, &perms);
+		if (COMBINED_PERM_MASK(perms) & request)
+			return perms;
+	}
+
+	/* try matching with namespace name and then profile */
+	state = aa_dfa_match(profile->file.dfa, start, ns->base.name);
+	state = aa_dfa_match_len(profile->file.dfa, state, ":", 1);
+	aa_str_perms(profile->file.dfa, state, name, &cond, &perms);
+
+	return perms;
+}
+
+/**
+ * __attach_match_ - find an attachment match
+ * @name - to match against  (NOT NULL)
+ * @head - profile list to walk  (NOT NULL)
+ *
+ * Do a linear search on the profiles in the list.  There is a matching
+ * preference where an exact match is preferred over a name which uses
+ * expressions to match, and matching expressions with the greatest
+ * xmatch_len are preferred.
+ *
+ * Requires: @head not be shared or have appropriate locks held
+ *
+ * Returns: profile or NULL if no match found
+ */
+static struct aa_profile *__attach_match(const char *name,
+					 struct list_head *head)
+{
+	int len = 0;
+	struct aa_profile *profile, *candidate = NULL;
+
+	list_for_each_entry(profile, head, base.list) {
+		if (profile->flags & PFLAG_NULL)
+			continue;
+		if (profile->xmatch && profile->xmatch_len > len) {
+			unsigned int state = aa_dfa_match(profile->xmatch,
+							  DFA_START, name);
+			u32 perm = dfa_user_allow(profile->xmatch, state);
+			/* any accepting state means a valid match. */
+			if (perm & MAY_EXEC) {
+				candidate = profile;
+				len = profile->xmatch_len;
+			}
+		} else if (!strcmp(profile->base.name, name))
+			/* exact non-re match, no more searching required */
+			return profile;
+	}
+
+	return candidate;
+}
+
+/**
+ * find_attach - do attachment search for unconfined processes
+ * @ns: the current namespace  (NOT NULL)
+ * @list: list to search  (NOT NULL)
+ * @name: the executable name to match against  (NOT NULL)
+ *
+ * Returns: profile or NULL if no match found
+ */
+static struct aa_profile *find_attach(struct aa_namespace *ns,
+				      struct list_head *list, const char *name)
+{
+	struct aa_profile *profile;
+
+	read_lock(&ns->lock);
+	profile = aa_get_profile(__attach_match(name, list));
+	read_unlock(&ns->lock);
+
+	return profile;
+}
+
+/**
+ * separate_fqname - separate the namespace and profile names
+ * @fqname: the fqname name to split  (NOT NULL)
+ * @ns_name: the namespace name if it exists  (NOT NULL)
+ *
+ * This is the xtable equivalent routine of aa_split_fqname.  It finds the
+ * split in an xtable fqname which contains an embedded \0 instead of a :
+ * if a namespace is specified.  This is done so the xtable is constant and
+ * isn't re-split on every lookup.
+ *
+ * Either the profile or namespace name may be optional but if the namespace
+ * is specified the profile name termination must be present.  This results
+ * in the following possible encodings:
+ * profile_name\0
+ * :ns_name\0profile_name\0
+ * :ns_name\0\0
+ *
+ * NOTE: the xtable fqname is pre-validated at load time in unpack_trans_table
+ *
+ * Returns: profile name if it is specified else NULL
+ */
+static const char *separate_fqname(const char *fqname, const char **ns_name)
+{
+	const char *name;
+
+	if (fqname[0] == ':') {
+		/* In this case there is guaranteed to be two \0 terminators
+		 * in the string.  They are verified at load time by
+		 * by unpack_trans_table
+		 */
+		*ns_name = fqname + 1;		/* skip : */
+		name = *ns_name + strlen(*ns_name) + 1;
+		if (!*name)
+			name = NULL;
+	} else {
+		*ns_name = NULL;
+		name = fqname;
+	}
+
+	return name;
+}
+
+static const char *next_name(int xtype, const char *name)
+{
+	return NULL;
+}
+
+/**
+ * x_table_lookup - lookup an x transition name via transition table
+ * @profile: current profile (NOT NULL)
+ * @xindex: index into x transition table
+ *
+ * Returns: refcounted profile, or NULL on failure (MAYBE NULL)
+ */
+static struct aa_profile *x_table_lookup(struct aa_profile *profile, u32 xindex)
+{
+	struct aa_profile *new_profile = NULL;
+	struct aa_namespace *ns = profile->ns;
+	u32 xtype = xindex & AA_X_TYPE_MASK;
+	int index = xindex & AA_X_INDEX_MASK;
+	const char *name;
+
+	/* index is guaranteed to be in range, validated at load time */
+	for (name = profile->file.trans.table[index]; !new_profile && name;
+	     name = next_name(xtype, name)) {
+		struct aa_namespace *new_ns;
+		const char *xname = NULL;
+
+		new_ns = NULL;
+		if (xindex & AA_X_CHILD) {
+			/* release by caller */
+			new_profile = aa_find_child(profile, name);
+			continue;
+		} else if (*name == ':') {
+			/* switching namespace */
+			const char *ns_name;
+			xname = name = separate_fqname(name, &ns_name);
+			if (!xname)
+				/* no name so use profile name */
+				xname = profile->base.hname;
+			if (*ns_name == '@') {
+				/* TODO: variable support */
+				;
+			}
+			/* released below */
+			new_ns = aa_find_namespace(ns, ns_name);
+			if (!new_ns)
+				continue;
+		} else if (*name == '@') {
+			/* TODO: variable support */
+			continue;
+		} else {
+			/* basic namespace lookup */
+			xname = name;
+		}
+
+		/* released by caller */
+		new_profile = aa_lookup_profile(new_ns ? new_ns : ns, xname);
+		aa_put_namespace(new_ns);
+	}
+
+	/* released by caller */
+	return new_profile;
+}
+
+/**
+ * x_to_profile - get target profile for a given xindex
+ * @profile: current profile  (NOT NULL)
+ * @name: name to lookup (NOT NULL)
+ * @xindex: index into x transition table
+ *
+ * find profile for a transition index
+ *
+ * Returns: refcounted profile or NULL if not found available
+ */
+static struct aa_profile *x_to_profile(struct aa_profile *profile,
+				       const char *name, u32 xindex)
+{
+	struct aa_profile *new_profile = NULL;
+	struct aa_namespace *ns = profile->ns;
+	u32 xtype = xindex & AA_X_TYPE_MASK;
+
+	switch (xtype) {
+	case AA_X_NONE:
+		/* fail exec unless ix || ux fallback - handled by caller */
+		return NULL;
+	case AA_X_NAME:
+		if (xindex & AA_X_CHILD)
+			/* released by caller */
+			new_profile = find_attach(ns, &profile->base.profiles,
+						  name);
+		else
+			/* released by caller */
+			new_profile = find_attach(ns, &ns->base.profiles,
+						  name);
+		break;
+	case AA_X_TABLE:
+		/* released by caller */
+		new_profile = x_table_lookup(profile, xindex);
+		break;
+	}
+
+	/* released by caller */
+	return new_profile;
+}
+
+/**
+ * apparmor_bprm_set_creds - set the new creds on the bprm struct
+ * @bprm: binprm for the exec  (NOT NULL)
+ *
+ * Returns: %0 or error on failure
+ */
+int apparmor_bprm_set_creds(struct linux_binprm *bprm)
+{
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *new_profile = NULL;
+	struct aa_namespace *ns;
+	char *buffer = NULL;
+	unsigned int state;
+	struct file_perms perms = {};
+	struct path_cond cond = {
+		bprm->file->f_path.dentry->d_inode->i_uid,
+		bprm->file->f_path.dentry->d_inode->i_mode
+	};
+	const char *name = NULL, *target = NULL, *info = NULL;
+	int error = cap_bprm_set_creds(bprm);
+	if (error)
+		return error;
+
+	if (bprm->cred_prepared)
+		return 0;
+
+	cxt = bprm->cred->security;
+	BUG_ON(!cxt);
+
+	profile = aa_get_profile(aa_newest_version(cxt->profile));
+	/*
+	 * get the namespace from the replacement profile as replacement
+	 * can change the namespace
+	 */
+	ns = profile->ns;
+	state = profile->file.start;
+
+	/* buffer freed below, name is pointer into buffer */
+	error = aa_get_name(&bprm->file->f_path, profile->path_flags, &buffer,
+			    &name);
+	if (error) {
+		if (profile->flags &
+		    (PFLAG_IX_ON_NAME_ERROR | PFLAG_UNCONFINED))
+			error = 0;
+		info = "Exec failed name resolution";
+		name = bprm->filename;
+		goto audit;
+	}
+
+	/* Test for onexec first as onexec directives override other
+	 * x transitions.
+	 */
+	if (unconfined(profile)) {
+		/* unconfined task */
+		if (cxt->onexec)
+			/* change_profile on exec already been granted */
+			new_profile = aa_get_profile(cxt->onexec);
+		else
+			new_profile = find_attach(ns, &ns->base.profiles, name);
+		if (!new_profile)
+			goto cleanup;
+		goto apply;
+	}
+
+	/* find exec permissions for name */
+	state = aa_str_perms(profile->file.dfa, state, name, &cond, &perms);
+	if (cxt->onexec) {
+		struct file_perms cp;
+		info = "change_profile onexec";
+		if (!(perms.allow & AA_MAY_ONEXEC))
+			goto audit;
+
+		/* test if this exec can be paired with change_profile onexec.
+		 * onexec permission is linked to exec with a standard pairing
+		 * exec\0change_profile
+		 */
+		state = aa_dfa_null_transition(profile->file.dfa, state);
+		cp = change_profile_perms(profile, cxt->onexec->ns, name,
+					  AA_MAY_ONEXEC, state);
+
+		if (!(cp.allow & AA_MAY_ONEXEC))
+			goto audit;
+		new_profile = aa_get_profile(aa_newest_version(cxt->onexec));
+		goto apply;
+	}
+
+	if (perms.allow & MAY_EXEC) {
+		/* exec permission determine how to transition */
+		new_profile = x_to_profile(profile, name, perms.xindex);
+		if (!new_profile) {
+			if (perms.xindex & AA_X_INHERIT) {
+				/* (p|c|n)ix - don't change profile but do
+				 * use the newest version, which was picked
+				 * up above when getting profile
+				 */
+				info = "ix fallback";
+				new_profile = aa_get_profile(profile);
+				goto x_clear;
+			} else if (perms.xindex & AA_X_UNCONFINED) {
+				new_profile = aa_get_profile(ns->unconfined);
+				info = "ux fallback";
+			} else {
+				error = -ENOENT;
+				info = "profile not found";
+			}
+		}
+	} else if (COMPLAIN_MODE(profile)) {
+		/* no exec permission - are we in learning mode */
+		new_profile = aa_new_null_profile(profile, 0);
+		if (!new_profile) {
+			error = -ENOMEM;
+			info = "could not create null profile";
+		} else {
+			error = -EACCES;
+			target = new_profile->base.hname;
+		}
+		perms.xindex |= AA_X_UNSAFE;
+	} else
+		/* fail exec */
+		error = -EACCES;
+
+	if (!new_profile)
+		goto audit;
+
+	if (bprm->unsafe & LSM_UNSAFE_SHARE) {
+		/* FIXME: currently don't mediate shared state */
+		;
+	}
+
+	if (bprm->unsafe & (LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)) {
+		error = may_change_ptraced_domain(current, new_profile);
+		if (error) {
+			aa_put_profile(new_profile);
+			goto audit;
+		}
+	}
+
+	/* Determine if secure exec is needed.
+	 * Can be at this point for the following reasons:
+	 * 1. unconfined switching to confined
+	 * 2. confined switching to different confinement
+	 * 3. confined switching to unconfined
+	 *
+	 * Cases 2 and 3 are marked as requiring secure exec
+	 * (unless policy specified "unsafe exec")
+	 *
+	 * bprm->unsafe is used to cache the AA_X_UNSAFE permission
+	 * to avoid having to recompute in secureexec
+	 */
+	if (!(perms.xindex & AA_X_UNSAFE)) {
+		AA_DEBUG("scrubbing environment variables for %s profile=%s\n",
+			 name, new_profile->base.hname);
+		bprm->unsafe |= AA_SECURE_X_NEEDED;
+	}
+apply:
+	target = new_profile->base.hname;
+	/* when transitioning profiles clear unsafe personality bits */
+	bprm->per_clear |= PER_CLEAR_ON_SETID;
+
+x_clear:
+	aa_put_profile(cxt->profile);
+	/* transfer new profile reference will be released when cxt is freed */
+	cxt->profile = new_profile;
+
+	/* clear out all temporary/transitional state from the context */
+	aa_put_profile(cxt->previous);
+	aa_put_profile(cxt->onexec);
+	cxt->previous = NULL;
+	cxt->onexec = NULL;
+	cxt->token = 0;
+
+audit:
+	error = aa_audit_file(profile, &perms, GFP_KERNEL, OP_EXEC, MAY_EXEC,
+			      name, target, cond.uid, info, error);
+
+cleanup:
+	aa_put_profile(profile);
+	kfree(buffer);
+
+	return error;
+}
+
+/**
+ * apparmor_bprm_secureexec - determine if secureexec is needed
+ * @bprm: binprm for exec  (NOT NULL)
+ *
+ * Returns: %1 if secureexec is needed else %0
+ */
+int apparmor_bprm_secureexec(struct linux_binprm *bprm)
+{
+	int ret = cap_bprm_secureexec(bprm);
+
+	/* the decision to use secure exec is computed in set_creds
+	 * and stored in bprm->unsafe.
+	 */
+	if (!ret && (bprm->unsafe & AA_SECURE_X_NEEDED))
+		ret = 1;
+
+	return ret;
+}
+
+/**
+ * apparmor_bprm_committing_creds - do task cleanup on committing new creds
+ * @bprm: binprm for the exec  (NOT NULL)
+ */
+void apparmor_bprm_committing_creds(struct linux_binprm *bprm)
+{
+	struct aa_profile *profile = __aa_current_profile();
+	struct aa_task_cxt *new_cxt = bprm->cred->security;
+
+	/* bail out if unconfined or not changing profile */
+	if ((new_cxt->profile == profile) ||
+	    (unconfined(new_cxt->profile)))
+		return;
+
+	current->pdeath_signal = 0;
+
+	/* reset soft limits and set hard limits for the new profile */
+	__aa_transition_rlimits(profile, new_cxt->profile);
+}
+
+/**
+ * apparmor_bprm_commited_cred - do cleanup after new creds committed
+ * @bprm: binprm for the exec  (NOT NULL)
+ */
+void apparmor_bprm_committed_creds(struct linux_binprm *bprm)
+{
+	/* TODO: cleanup signals - ipc mediation */
+	return;
+}
+
+/*
+ * Functions for self directed profile change
+ */
+
+/**
+ * new_compound_name - create an hname with @n2 appended to @n1
+ * @n1: base of hname  (NOT NULL)
+ * @n2: name to append (NOT NULL)
+ *
+ * Returns: new name or NULL on error
+ */
+static char *new_compound_name(const char *n1, const char *n2)
+{
+	char *name = kmalloc(strlen(n1) + strlen(n2) + 3, GFP_KERNEL);
+	if (name)
+		sprintf(name, "%s//%s", n1, n2);
+	return name;
+}
+
+/**
+ * aa_change_hat - change hat to/from subprofile
+ * @hats: vector of hat names to try changing into (MAYBE NULL if @count == 0)
+ * @count: number of hat names in @hats
+ * @token: magic value to validate the hat change
+ * @permtest: true if this is just a permission test
+ *
+ * Change to the first profile specified in @hats that exists, and store
+ * the @hat_magic in the current task context.  If the count == 0 and the
+ * @token matches that stored in the current task context, return to the
+ * top level profile.
+ *
+ * Returns %0 on success, error otherwise.
+ */
+int aa_change_hat(const char *hats[], int count, u64 token, bool permtest)
+{
+	const struct cred *cred;
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *previous_profile, *hat = NULL;
+	char *name = NULL;
+	int i;
+	struct file_perms perms = {};
+	const char *target = NULL, *info = NULL;
+	int error = 0;
+
+	/* released below */
+	cred = get_current_cred();
+	cxt = cred->security;
+	profile = aa_cred_profile(cred);
+	previous_profile = cxt->previous;
+
+	if (unconfined(profile)) {
+		info = "unconfined";
+		error = -EPERM;
+		goto audit;
+	}
+
+	if (count) {
+		/* attempting to change into a new hat or switch to a sibling */
+		struct aa_profile *root;
+		root = PROFILE_IS_HAT(profile) ? profile->parent : profile;
+
+		/* find first matching hat */
+		for (i = 0; i < count && !hat; i++)
+			/* released below */
+			hat = aa_find_child(root, hats[i]);
+		if (!hat) {
+			if (!COMPLAIN_MODE(root) || permtest) {
+				if (list_empty(&root->base.profiles))
+					error = -ECHILD;
+				else
+					error = -ENOENT;
+				goto out;
+			}
+
+			/*
+			 * In complain mode and failed to match any hats.
+			 * Audit the failure is based off of the first hat
+			 * supplied.  This is done due how userspace
+			 * interacts with change_hat.
+			 *
+			 * TODO: Add logging of all failed hats
+			 */
+
+			/* freed below */
+			name = new_compound_name(root->base.hname, hats[0]);
+			target = name;
+			/* released below */
+			hat = aa_new_null_profile(profile, 1);
+			if (!hat) {
+				info = "failed null profile create";
+				error = -ENOMEM;
+				goto audit;
+			}
+		} else {
+			target = hat->base.hname;
+			if (!PROFILE_IS_HAT(hat)) {
+				info = "target not hat";
+				error = -EPERM;
+				goto audit;
+			}
+		}
+
+		error = may_change_ptraced_domain(current, hat);
+		if (error) {
+			info = "ptraced";
+			error = -EPERM;
+			goto audit;
+		}
+
+		if (!permtest) {
+			error = aa_set_current_hat(hat, token);
+			if (error == -EACCES)
+				/* kill task in case of brute force attacks */
+				perms.kill = AA_MAY_CHANGEHAT;
+			else if (name && !error)
+				/* reset error for learning of new hats */
+				error = -ENOENT;
+		}
+	} else if (previous_profile) {
+		/* Return to saved profile.  Kill task if restore fails
+		 * to avoid brute force attacks
+		 */
+		target = previous_profile->base.hname;
+		error = aa_restore_previous_profile(token);
+		perms.kill = AA_MAY_CHANGEHAT;
+	} else
+		/* ignore restores when there is no saved profile */
+		goto out;
+
+audit:
+	if (!permtest)
+		error = aa_audit_file(profile, &perms, GFP_KERNEL,
+				      OP_CHANGE_HAT, AA_MAY_CHANGEHAT, NULL,
+				      target, 0, info, error);
+
+out:
+	aa_put_profile(hat);
+	kfree(name);
+	put_cred(cred);
+
+	return error;
+}
+
+/**
+ * aa_change_profile - perform a one-way profile transition
+ * @ns_name: name of the profile namespace to change to (MAYBE NULL)
+ * @hname: name of profile to change to (MAYBE NULL)
+ * @onexec: whether this transition is to take place immediately or at exec
+ * @permtest: true if this is just a permission test
+ *
+ * Change to new profile @name.  Unlike with hats, there is no way
+ * to change back.  If @name isn't specified the current profile name is
+ * used.
+ * If @onexec then the transition is delayed until
+ * the next exec.
+ *
+ * Returns %0 on success, error otherwise.
+ */
+int aa_change_profile(const char *ns_name, const char *hname, bool onexec,
+		      bool permtest)
+{
+	const struct cred *cred;
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *target = NULL;
+	struct aa_namespace *ns = NULL;
+	struct file_perms perms = {};
+	const char *name = NULL, *info = NULL;
+	int op, error = 0;
+	u32 request;
+
+	if (!hname && !ns_name)
+		return -EINVAL;
+
+	if (onexec) {
+		request = AA_MAY_ONEXEC;
+		op = OP_CHANGE_ONEXEC;
+	} else {
+		request = AA_MAY_CHANGE_PROFILE;
+		op = OP_CHANGE_PROFILE;
+	}
+
+	cred = get_current_cred();
+	cxt = cred->security;
+	profile = aa_cred_profile(cred);
+
+	if (ns_name) {
+		/* released below */
+		ns = aa_find_namespace(profile->ns, ns_name);
+		if (!ns) {
+			/* we don't create new namespace in complain mode */
+			name = ns_name;
+			info = "namespace not found";
+			error = -ENOENT;
+			goto audit;
+		}
+	} else
+		/* released below */
+		ns = aa_get_namespace(profile->ns);
+
+	/* if the name was not specified, use the name of the current profile */
+	if (!hname) {
+		if (unconfined(profile))
+			hname = ns->unconfined->base.hname;
+		else
+			hname = profile->base.hname;
+	}
+
+	perms = change_profile_perms(profile, ns, hname, request,
+				     profile->file.start);
+	if (!(perms.allow & request)) {
+		error = -EACCES;
+		goto audit;
+	}
+
+	/* released below */
+	target = aa_lookup_profile(ns, hname);
+	if (!target) {
+		info = "profile not found";
+		error = -ENOENT;
+		if (permtest || !COMPLAIN_MODE(profile))
+			goto audit;
+		/* released below */
+		target = aa_new_null_profile(profile, 0);
+		if (!target) {
+			info = "failed null profile create";
+			error = -ENOMEM;
+			goto audit;
+		}
+	}
+
+	/* check if tracing task is allowed to trace target domain */
+	error = may_change_ptraced_domain(current, target);
+	if (error) {
+		info = "ptrace prevents transition";
+		goto audit;
+	}
+
+	if (permtest)
+		goto audit;
+
+	if (onexec)
+		error = aa_set_current_onexec(target);
+	else
+		error = aa_replace_current_profile(target);
+
+audit:
+	if (!permtest)
+		error = aa_audit_file(profile, &perms, GFP_KERNEL, op, request,
+				      name, hname, 0, info, error);
+
+	aa_put_namespace(ns);
+	aa_put_profile(target);
+	put_cred(cred);
+
+	return error;
+}
diff --git a/security/apparmor/file.c b/security/apparmor/file.c
new file mode 100644
index 00000000000..7312db74121
--- /dev/null
+++ b/security/apparmor/file.c
@@ -0,0 +1,457 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor mediation of files
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/file.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+struct file_perms nullperms;
+
+
+/**
+ * audit_file_mask - convert mask to permission string
+ * @buffer: buffer to write string to (NOT NULL)
+ * @mask: permission mask to convert
+ */
+static void audit_file_mask(struct audit_buffer *ab, u32 mask)
+{
+	char str[10];
+
+	char *m = str;
+
+	if (mask & AA_EXEC_MMAP)
+		*m++ = 'm';
+	if (mask & (MAY_READ | AA_MAY_META_READ))
+		*m++ = 'r';
+	if (mask & (MAY_WRITE | AA_MAY_META_WRITE | AA_MAY_CHMOD |
+		    AA_MAY_CHOWN))
+		*m++ = 'w';
+	else if (mask & MAY_APPEND)
+		*m++ = 'a';
+	if (mask & AA_MAY_CREATE)
+		*m++ = 'c';
+	if (mask & AA_MAY_DELETE)
+		*m++ = 'd';
+	if (mask & AA_MAY_LINK)
+		*m++ = 'l';
+	if (mask & AA_MAY_LOCK)
+		*m++ = 'k';
+	if (mask & MAY_EXEC)
+		*m++ = 'x';
+	*m = '\0';
+
+	audit_log_string(ab, str);
+}
+
+/**
+ * file_audit_cb - call back for file specific audit fields
+ * @ab: audit_buffer  (NOT NULL)
+ * @va: audit struct to audit values of  (NOT NULL)
+ */
+static void file_audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	uid_t fsuid = current_fsuid();
+
+	if (sa->aad.fs.request & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " requested_mask=");
+		audit_file_mask(ab, sa->aad.fs.request);
+	}
+	if (sa->aad.fs.denied & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " denied_mask=");
+		audit_file_mask(ab, sa->aad.fs.denied);
+	}
+	if (sa->aad.fs.request & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " fsuid=%d", fsuid);
+		audit_log_format(ab, " ouid=%d", sa->aad.fs.ouid);
+	}
+
+	if (sa->aad.fs.target) {
+		audit_log_format(ab, " target=");
+		audit_log_untrustedstring(ab, sa->aad.fs.target);
+	}
+}
+
+/**
+ * aa_audit_file - handle the auditing of file operations
+ * @profile: the profile being enforced  (NOT NULL)
+ * @perms: the permissions computed for the request (NOT NULL)
+ * @gfp: allocation flags
+ * @op: operation being mediated
+ * @request: permissions requested
+ * @name: name of object being mediated (MAYBE NULL)
+ * @target: name of target (MAYBE NULL)
+ * @ouid: object uid
+ * @info: extra information message (MAYBE NULL)
+ * @error: 0 if operation allowed else failure error code
+ *
+ * Returns: %0 or error on failure
+ */
+int aa_audit_file(struct aa_profile *profile, struct file_perms *perms,
+		  gfp_t gfp, int op, u32 request, const char *name,
+		  const char *target, uid_t ouid, const char *info, int error)
+{
+	int type = AUDIT_APPARMOR_AUTO;
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = op,
+	sa.aad.fs.request = request;
+	sa.aad.name = name;
+	sa.aad.fs.target = target;
+	sa.aad.fs.ouid = ouid;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	if (likely(!sa.aad.error)) {
+		u32 mask = perms->audit;
+
+		if (unlikely(AUDIT_MODE(profile) == AUDIT_ALL))
+			mask = 0xffff;
+
+		/* mask off perms that are not being force audited */
+		sa.aad.fs.request &= mask;
+
+		if (likely(!sa.aad.fs.request))
+			return 0;
+		type = AUDIT_APPARMOR_AUDIT;
+	} else {
+		/* only report permissions that were denied */
+		sa.aad.fs.request = sa.aad.fs.request & ~perms->allow;
+
+		if (sa.aad.fs.request & perms->kill)
+			type = AUDIT_APPARMOR_KILL;
+
+		/* quiet known rejects, assumes quiet and kill do not overlap */
+		if ((sa.aad.fs.request & perms->quiet) &&
+		    AUDIT_MODE(profile) != AUDIT_NOQUIET &&
+		    AUDIT_MODE(profile) != AUDIT_ALL)
+			sa.aad.fs.request &= ~perms->quiet;
+
+		if (!sa.aad.fs.request)
+			return COMPLAIN_MODE(profile) ? 0 : sa.aad.error;
+	}
+
+	sa.aad.fs.denied = sa.aad.fs.request & ~perms->allow;
+	return aa_audit(type, profile, gfp, &sa, file_audit_cb);
+}
+
+/**
+ * map_old_perms - map old file perms layout to the new layout
+ * @old: permission set in old mapping
+ *
+ * Returns: new permission mapping
+ */
+static u32 map_old_perms(u32 old)
+{
+	u32 new = old & 0xf;
+	if (old & MAY_READ)
+		new |= AA_MAY_META_READ;
+	if (old & MAY_WRITE)
+		new |= AA_MAY_META_WRITE | AA_MAY_CREATE | AA_MAY_DELETE |
+			AA_MAY_CHMOD | AA_MAY_CHOWN;
+	if (old & 0x10)
+		new |= AA_MAY_LINK;
+	/* the old mapping lock and link_subset flags where overlaid
+	 * and use was determined by part of a pair that they were in
+	 */
+	if (old & 0x20)
+		new |= AA_MAY_LOCK | AA_LINK_SUBSET;
+	if (old & 0x40)	/* AA_EXEC_MMAP */
+		new |= AA_EXEC_MMAP;
+
+	new |= AA_MAY_META_READ;
+
+	return new;
+}
+
+/**
+ * compute_perms - convert dfa compressed perms to internal perms
+ * @dfa: dfa to compute perms for   (NOT NULL)
+ * @state: state in dfa
+ * @cond:  conditions to consider  (NOT NULL)
+ *
+ * TODO: convert from dfa + state to permission entry, do computation conversion
+ *       at load time.
+ *
+ * Returns: computed permission set
+ */
+static struct file_perms compute_perms(struct aa_dfa *dfa, unsigned int state,
+				       struct path_cond *cond)
+{
+	struct file_perms perms;
+
+	/* FIXME: change over to new dfa format
+	 * currently file perms are encoded in the dfa, new format
+	 * splits the permissions from the dfa.  This mapping can be
+	 * done at profile load
+	 */
+	perms.kill = 0;
+
+	if (current_fsuid() == cond->uid) {
+		perms.allow = map_old_perms(dfa_user_allow(dfa, state));
+		perms.audit = map_old_perms(dfa_user_audit(dfa, state));
+		perms.quiet = map_old_perms(dfa_user_quiet(dfa, state));
+		perms.xindex = dfa_user_xindex(dfa, state);
+	} else {
+		perms.allow = map_old_perms(dfa_other_allow(dfa, state));
+		perms.audit = map_old_perms(dfa_other_audit(dfa, state));
+		perms.quiet = map_old_perms(dfa_other_quiet(dfa, state));
+		perms.xindex = dfa_other_xindex(dfa, state);
+	}
+
+	/* change_profile wasn't determined by ownership in old mapping */
+	if (ACCEPT_TABLE(dfa)[state] & 0x80000000)
+		perms.allow |= AA_MAY_CHANGE_PROFILE;
+
+	return perms;
+}
+
+/**
+ * aa_str_perms - find permission that match @name
+ * @dfa: to match against  (MAYBE NULL)
+ * @state: state to start matching in
+ * @name: string to match against dfa  (NOT NULL)
+ * @cond: conditions to consider for permission set computation  (NOT NULL)
+ * @perms: Returns - the permissions found when matching @name
+ *
+ * Returns: the final state in @dfa when beginning @start and walking @name
+ */
+unsigned int aa_str_perms(struct aa_dfa *dfa, unsigned int start,
+			  const char *name, struct path_cond *cond,
+			  struct file_perms *perms)
+{
+	unsigned int state;
+	if (!dfa) {
+		*perms = nullperms;
+		return DFA_NOMATCH;
+	}
+
+	state = aa_dfa_match(dfa, start, name);
+	*perms = compute_perms(dfa, state, cond);
+
+	return state;
+}
+
+/**
+ * is_deleted - test if a file has been completely unlinked
+ * @dentry: dentry of file to test for deletion  (NOT NULL)
+ *
+ * Returns: %1 if deleted else %0
+ */
+static inline bool is_deleted(struct dentry *dentry)
+{
+	if (d_unlinked(dentry) && dentry->d_inode->i_nlink == 0)
+		return 1;
+	return 0;
+}
+
+/**
+ * aa_path_perm - do permissions check & audit for @path
+ * @op: operation being checked
+ * @profile: profile being enforced  (NOT NULL)
+ * @path: path to check permissions of  (NOT NULL)
+ * @flags: any additional path flags beyond what the profile specifies
+ * @request: requested permissions
+ * @cond: conditional info for this request  (NOT NULL)
+ *
+ * Returns: %0 else error if access denied or other error
+ */
+int aa_path_perm(int op, struct aa_profile *profile, struct path *path,
+		 int flags, u32 request, struct path_cond *cond)
+{
+	char *buffer = NULL;
+	struct file_perms perms = {};
+	const char *name, *info = NULL;
+	int error;
+
+	flags |= profile->path_flags | (S_ISDIR(cond->mode) ? PATH_IS_DIR : 0);
+	error = aa_get_name(path, flags, &buffer, &name);
+	if (error) {
+		if (error == -ENOENT && is_deleted(path->dentry)) {
+			/* Access to open files that are deleted are
+			 * give a pass (implicit delegation)
+			 */
+			error = 0;
+			perms.allow = request;
+		} else if (error == -ENOENT)
+			info = "Failed name lookup - deleted entry";
+		else if (error == -ESTALE)
+			info = "Failed name lookup - disconnected path";
+		else if (error == -ENAMETOOLONG)
+			info = "Failed name lookup - name too long";
+		else
+			info = "Failed name lookup";
+	} else {
+		aa_str_perms(profile->file.dfa, profile->file.start, name, cond,
+			     &perms);
+		if (request & ~perms.allow)
+			error = -EACCES;
+	}
+	error = aa_audit_file(profile, &perms, GFP_KERNEL, op, request, name,
+			      NULL, cond->uid, info, error);
+	kfree(buffer);
+
+	return error;
+}
+
+/**
+ * xindex_is_subset - helper for aa_path_link
+ * @link: link permission set
+ * @target: target permission set
+ *
+ * test target x permissions are equal OR a subset of link x permissions
+ * this is done as part of the subset test, where a hardlink must have
+ * a subset of permissions that the target has.
+ *
+ * Returns: %1 if subset else %0
+ */
+static inline bool xindex_is_subset(u32 link, u32 target)
+{
+	if (((link & ~AA_X_UNSAFE) != (target & ~AA_X_UNSAFE)) ||
+	    ((link & AA_X_UNSAFE) && !(target & AA_X_UNSAFE)))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * aa_path_link - Handle hard link permission check
+ * @profile: the profile being enforced  (NOT NULL)
+ * @old_dentry: the target dentry  (NOT NULL)
+ * @new_dir: directory the new link will be created in  (NOT NULL)
+ * @new_dentry: the link being created  (NOT NULL)
+ *
+ * Handle the permission test for a link & target pair.  Permission
+ * is encoded as a pair where the link permission is determined
+ * first, and if allowed, the target is tested.  The target test
+ * is done from the point of the link match (not start of DFA)
+ * making the target permission dependent on the link permission match.
+ *
+ * The subset test if required forces that permissions granted
+ * on link are a subset of the permission granted to target.
+ *
+ * Returns: %0 if allowed else error
+ */
+int aa_path_link(struct aa_profile *profile, struct dentry *old_dentry,
+		 struct path *new_dir, struct dentry *new_dentry)
+{
+	struct path link = { new_dir->mnt, new_dentry };
+	struct path target = { new_dir->mnt, old_dentry };
+	struct path_cond cond = {
+		old_dentry->d_inode->i_uid,
+		old_dentry->d_inode->i_mode
+	};
+	char *buffer = NULL, *buffer2 = NULL;
+	const char *lname, *tname = NULL, *info = NULL;
+	struct file_perms lperms, perms;
+	u32 request = AA_MAY_LINK;
+	unsigned int state;
+	int error;
+
+	lperms = nullperms;
+
+	/* buffer freed below, lname is pointer in buffer */
+	error = aa_get_name(&link, profile->path_flags, &buffer, &lname);
+	if (error)
+		goto audit;
+
+	/* buffer2 freed below, tname is pointer in buffer2 */
+	error = aa_get_name(&target, profile->path_flags, &buffer2, &tname);
+	if (error)
+		goto audit;
+
+	error = -EACCES;
+	/* aa_str_perms - handles the case of the dfa being NULL */
+	state = aa_str_perms(profile->file.dfa, profile->file.start, lname,
+			     &cond, &lperms);
+
+	if (!(lperms.allow & AA_MAY_LINK))
+		goto audit;
+
+	/* test to see if target can be paired with link */
+	state = aa_dfa_null_transition(profile->file.dfa, state);
+	aa_str_perms(profile->file.dfa, state, tname, &cond, &perms);
+
+	/* force audit/quiet masks for link are stored in the second entry
+	 * in the link pair.
+	 */
+	lperms.audit = perms.audit;
+	lperms.quiet = perms.quiet;
+	lperms.kill = perms.kill;
+
+	if (!(perms.allow & AA_MAY_LINK)) {
+		info = "target restricted";
+		goto audit;
+	}
+
+	/* done if link subset test is not required */
+	if (!(perms.allow & AA_LINK_SUBSET))
+		goto done_tests;
+
+	/* Do link perm subset test requiring allowed permission on link are a
+	 * subset of the allowed permissions on target.
+	 */
+	aa_str_perms(profile->file.dfa, profile->file.start, tname, &cond,
+		     &perms);
+
+	/* AA_MAY_LINK is not considered in the subset test */
+	request = lperms.allow & ~AA_MAY_LINK;
+	lperms.allow &= perms.allow | AA_MAY_LINK;
+
+	request |= AA_AUDIT_FILE_MASK & (lperms.allow & ~perms.allow);
+	if (request & ~lperms.allow) {
+		goto audit;
+	} else if ((lperms.allow & MAY_EXEC) &&
+		   !xindex_is_subset(lperms.xindex, perms.xindex)) {
+		lperms.allow &= ~MAY_EXEC;
+		request |= MAY_EXEC;
+		info = "link not subset of target";
+		goto audit;
+	}
+
+done_tests:
+	error = 0;
+
+audit:
+	error = aa_audit_file(profile, &lperms, GFP_KERNEL, OP_LINK, request,
+			      lname, tname, cond.uid, info, error);
+	kfree(buffer);
+	kfree(buffer2);
+
+	return error;
+}
+
+/**
+ * aa_file_perm - do permission revalidation check & audit for @file
+ * @op: operation being checked
+ * @profile: profile being enforced   (NOT NULL)
+ * @file: file to revalidate access permissions on  (NOT NULL)
+ * @request: requested permissions
+ *
+ * Returns: %0 if access allowed else error
+ */
+int aa_file_perm(int op, struct aa_profile *profile, struct file *file,
+		 u32 request)
+{
+	struct path_cond cond = {
+		.uid = file->f_path.dentry->d_inode->i_uid,
+		.mode = file->f_path.dentry->d_inode->i_mode
+	};
+
+	return aa_path_perm(op, profile, &file->f_path, PATH_DELEGATE_DELETED,
+			    request, &cond);
+}
diff --git a/security/apparmor/include/apparmor.h b/security/apparmor/include/apparmor.h
new file mode 100644
index 00000000000..38ccaea0820
--- /dev/null
+++ b/security/apparmor/include/apparmor.h
@@ -0,0 +1,92 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor basic global and lib definitions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __APPARMOR_H
+#define __APPARMOR_H
+
+#include <linux/fs.h>
+
+#include "match.h"
+
+/* Control parameters settable through module/boot flags */
+extern enum audit_mode aa_g_audit;
+extern int aa_g_audit_header;
+extern int aa_g_debug;
+extern int aa_g_lock_policy;
+extern int aa_g_logsyscall;
+extern int aa_g_paranoid_load;
+extern unsigned int aa_g_path_max;
+
+/*
+ * DEBUG remains global (no per profile flag) since it is mostly used in sysctl
+ * which is not related to profile accesses.
+ */
+
+#define AA_DEBUG(fmt, args...)						\
+	do {								\
+		if (aa_g_debug && printk_ratelimit())			\
+			printk(KERN_DEBUG "AppArmor: " fmt, ##args);	\
+	} while (0)
+
+#define AA_ERROR(fmt, args...)						\
+	do {								\
+		if (printk_ratelimit())					\
+			printk(KERN_ERR "AppArmor: " fmt, ##args);	\
+	} while (0)
+
+/* Flag indicating whether initialization completed */
+extern int apparmor_initialized __initdata;
+
+/* fn's in lib */
+char *aa_split_fqname(char *args, char **ns_name);
+void aa_info_message(const char *str);
+void *kvmalloc(size_t size);
+void kvfree(void *buffer);
+
+
+/**
+ * aa_strneq - compare null terminated @str to a non null terminated substring
+ * @str: a null terminated string
+ * @sub: a substring, not necessarily null terminated
+ * @len: length of @sub to compare
+ *
+ * The @str string must be full consumed for this to be considered a match
+ */
+static inline bool aa_strneq(const char *str, const char *sub, int len)
+{
+	return !strncmp(str, sub, len) && !str[len];
+}
+
+/**
+ * aa_dfa_null_transition - step to next state after null character
+ * @dfa: the dfa to match against
+ * @start: the state of the dfa to start matching in
+ *
+ * aa_dfa_null_transition transitions to the next state after a null
+ * character which is not used in standard matching and is only
+ * used to separate pairs.
+ */
+static inline unsigned int aa_dfa_null_transition(struct aa_dfa *dfa,
+						  unsigned int start)
+{
+	/* the null transition only needs the string's null terminator byte */
+	return aa_dfa_match_len(dfa, start, "", 1);
+}
+
+static inline bool mediated_filesystem(struct inode *inode)
+{
+	return !(inode->i_sb->s_flags & MS_NOUSER);
+}
+
+#endif /* __APPARMOR_H */
diff --git a/security/apparmor/include/apparmorfs.h b/security/apparmor/include/apparmorfs.h
new file mode 100644
index 00000000000..cb1e93a114d
--- /dev/null
+++ b/security/apparmor/include/apparmorfs.h
@@ -0,0 +1,20 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor filesystem definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_APPARMORFS_H
+#define __AA_APPARMORFS_H
+
+extern void __init aa_destroy_aafs(void);
+
+#endif /* __AA_APPARMORFS_H */
diff --git a/security/apparmor/include/audit.h b/security/apparmor/include/audit.h
new file mode 100644
index 00000000000..1951786d32e
--- /dev/null
+++ b/security/apparmor/include/audit.h
@@ -0,0 +1,123 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor auditing function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_AUDIT_H
+#define __AA_AUDIT_H
+
+#include <linux/audit.h>
+#include <linux/fs.h>
+#include <linux/lsm_audit.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "file.h"
+
+struct aa_profile;
+
+extern const char *audit_mode_names[];
+#define AUDIT_MAX_INDEX 5
+
+#define AUDIT_APPARMOR_AUTO 0	/* auto choose audit message type */
+
+enum audit_mode {
+	AUDIT_NORMAL,		/* follow normal auditing of accesses */
+	AUDIT_QUIET_DENIED,	/* quiet all denied access messages */
+	AUDIT_QUIET,		/* quiet all messages */
+	AUDIT_NOQUIET,		/* do not quiet audit messages */
+	AUDIT_ALL		/* audit all accesses */
+};
+
+enum audit_type {
+	AUDIT_APPARMOR_AUDIT,
+	AUDIT_APPARMOR_ALLOWED,
+	AUDIT_APPARMOR_DENIED,
+	AUDIT_APPARMOR_HINT,
+	AUDIT_APPARMOR_STATUS,
+	AUDIT_APPARMOR_ERROR,
+	AUDIT_APPARMOR_KILL
+};
+
+extern const char *op_table[];
+enum aa_ops {
+	OP_NULL,
+
+	OP_SYSCTL,
+	OP_CAPABLE,
+
+	OP_UNLINK,
+	OP_MKDIR,
+	OP_RMDIR,
+	OP_MKNOD,
+	OP_TRUNC,
+	OP_LINK,
+	OP_SYMLINK,
+	OP_RENAME_SRC,
+	OP_RENAME_DEST,
+	OP_CHMOD,
+	OP_CHOWN,
+	OP_GETATTR,
+	OP_OPEN,
+
+	OP_FPERM,
+	OP_FLOCK,
+	OP_FMMAP,
+	OP_FMPROT,
+
+	OP_CREATE,
+	OP_POST_CREATE,
+	OP_BIND,
+	OP_CONNECT,
+	OP_LISTEN,
+	OP_ACCEPT,
+	OP_SENDMSG,
+	OP_RECVMSG,
+	OP_GETSOCKNAME,
+	OP_GETPEERNAME,
+	OP_GETSOCKOPT,
+	OP_SETSOCKOPT,
+	OP_SOCK_SHUTDOWN,
+
+	OP_PTRACE,
+
+	OP_EXEC,
+	OP_CHANGE_HAT,
+	OP_CHANGE_PROFILE,
+	OP_CHANGE_ONEXEC,
+
+	OP_SETPROCATTR,
+	OP_SETRLIMIT,
+
+	OP_PROF_REPL,
+	OP_PROF_LOAD,
+	OP_PROF_RM,
+};
+
+
+/* define a short hand for apparmor_audit_data portion of common_audit_data */
+#define aad apparmor_audit_data
+
+void aa_audit_msg(int type, struct common_audit_data *sa,
+		  void (*cb) (struct audit_buffer *, void *));
+int aa_audit(int type, struct aa_profile *profile, gfp_t gfp,
+	     struct common_audit_data *sa,
+	     void (*cb) (struct audit_buffer *, void *));
+
+static inline int complain_error(int error)
+{
+	if (error == -EPERM || error == -EACCES)
+		return 0;
+	return error;
+}
+
+#endif /* __AA_AUDIT_H */
diff --git a/security/apparmor/include/capability.h b/security/apparmor/include/capability.h
new file mode 100644
index 00000000000..c24d2959ea0
--- /dev/null
+++ b/security/apparmor/include/capability.h
@@ -0,0 +1,45 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor capability mediation definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_CAPABILITY_H
+#define __AA_CAPABILITY_H
+
+#include <linux/sched.h>
+
+struct aa_profile;
+
+/* aa_caps - confinement data for capabilities
+ * @allowed: capabilities mask
+ * @audit: caps that are to be audited
+ * @quiet: caps that should not be audited
+ * @kill: caps that when requested will result in the task being killed
+ * @extended: caps that are subject finer grained mediation
+ */
+struct aa_caps {
+	kernel_cap_t allow;
+	kernel_cap_t audit;
+	kernel_cap_t quiet;
+	kernel_cap_t kill;
+	kernel_cap_t extended;
+};
+
+int aa_capable(struct task_struct *task, struct aa_profile *profile, int cap,
+	       int audit);
+
+static inline void aa_free_cap_rules(struct aa_caps *caps)
+{
+	/* NOP */
+}
+
+#endif /* __AA_CAPBILITY_H */
diff --git a/security/apparmor/include/context.h b/security/apparmor/include/context.h
new file mode 100644
index 00000000000..a9cbee4d9e4
--- /dev/null
+++ b/security/apparmor/include/context.h
@@ -0,0 +1,154 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor contexts used to associate "labels" to objects.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_CONTEXT_H
+#define __AA_CONTEXT_H
+
+#include <linux/cred.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include "policy.h"
+
+/* struct aa_file_cxt - the AppArmor context the file was opened in
+ * @perms: the permission the file was opened with
+ *
+ * The file_cxt could currently be directly stored in file->f_security
+ * as the profile reference is now stored in the f_cred.  However the
+ * cxt struct will expand in the future so we keep the struct.
+ */
+struct aa_file_cxt {
+	u16 allow;
+};
+
+/**
+ * aa_alloc_file_context - allocate file_cxt
+ * @gfp: gfp flags for allocation
+ *
+ * Returns: file_cxt or NULL on failure
+ */
+static inline struct aa_file_cxt *aa_alloc_file_context(gfp_t gfp)
+{
+	return kzalloc(sizeof(struct aa_file_cxt), gfp);
+}
+
+/**
+ * aa_free_file_context - free a file_cxt
+ * @cxt: file_cxt to free  (MAYBE_NULL)
+ */
+static inline void aa_free_file_context(struct aa_file_cxt *cxt)
+{
+	if (cxt)
+		kzfree(cxt);
+}
+
+/**
+ * struct aa_task_cxt - primary label for confined tasks
+ * @profile: the current profile   (NOT NULL)
+ * @exec: profile to transition to on next exec  (MAYBE NULL)
+ * @previous: profile the task may return to     (MAYBE NULL)
+ * @token: magic value the task must know for returning to @previous_profile
+ *
+ * Contains the task's current profile (which could change due to
+ * change_hat).  Plus the hat_magic needed during change_hat.
+ *
+ * TODO: make so a task can be confined by a stack of contexts
+ */
+struct aa_task_cxt {
+	struct aa_profile *profile;
+	struct aa_profile *onexec;
+	struct aa_profile *previous;
+	u64 token;
+};
+
+struct aa_task_cxt *aa_alloc_task_context(gfp_t flags);
+void aa_free_task_context(struct aa_task_cxt *cxt);
+void aa_dup_task_context(struct aa_task_cxt *new,
+			 const struct aa_task_cxt *old);
+int aa_replace_current_profile(struct aa_profile *profile);
+int aa_set_current_onexec(struct aa_profile *profile);
+int aa_set_current_hat(struct aa_profile *profile, u64 token);
+int aa_restore_previous_profile(u64 cookie);
+
+/**
+ * __aa_task_is_confined - determine if @task has any confinement
+ * @task: task to check confinement of  (NOT NULL)
+ *
+ * If @task != current needs to be called in RCU safe critical section
+ */
+static inline bool __aa_task_is_confined(struct task_struct *task)
+{
+	struct aa_task_cxt *cxt = __task_cred(task)->security;
+
+	BUG_ON(!cxt || !cxt->profile);
+	if (unconfined(aa_newest_version(cxt->profile)))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * aa_cred_profile - obtain cred's profiles
+ * @cred: cred to obtain profiles from  (NOT NULL)
+ *
+ * Returns: confining profile
+ *
+ * does NOT increment reference count
+ */
+static inline struct aa_profile *aa_cred_profile(const struct cred *cred)
+{
+	struct aa_task_cxt *cxt = cred->security;
+	BUG_ON(!cxt || !cxt->profile);
+	return aa_newest_version(cxt->profile);
+}
+
+/**
+ * __aa_current_profile - find the current tasks confining profile
+ *
+ * Returns: up to date confining profile or the ns unconfined profile (NOT NULL)
+ *
+ * This fn will not update the tasks cred to the most up to date version
+ * of the profile so it is safe to call when inside of locks.
+ */
+static inline struct aa_profile *__aa_current_profile(void)
+{
+	return aa_cred_profile(current_cred());
+}
+
+/**
+ * aa_current_profile - find the current tasks confining profile and do updates
+ *
+ * Returns: up to date confining profile or the ns unconfined profile (NOT NULL)
+ *
+ * This fn will update the tasks cred structure if the profile has been
+ * replaced.  Not safe to call inside locks
+ */
+static inline struct aa_profile *aa_current_profile(void)
+{
+	const struct aa_task_cxt *cxt = current_cred()->security;
+	struct aa_profile *profile;
+	BUG_ON(!cxt || !cxt->profile);
+
+	profile = aa_newest_version(cxt->profile);
+	/*
+	 * Whether or not replacement succeeds, use newest profile so
+	 * there is no need to update it after replacement.
+	 */
+	if (unlikely((cxt->profile != profile)))
+		aa_replace_current_profile(profile);
+
+	return profile;
+}
+
+#endif /* __AA_CONTEXT_H */
diff --git a/security/apparmor/include/domain.h b/security/apparmor/include/domain.h
new file mode 100644
index 00000000000..de04464f0a3
--- /dev/null
+++ b/security/apparmor/include/domain.h
@@ -0,0 +1,36 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security domain transition function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/binfmts.h>
+#include <linux/types.h>
+
+#ifndef __AA_DOMAIN_H
+#define __AA_DOMAIN_H
+
+struct aa_domain {
+	int size;
+	char **table;
+};
+
+int apparmor_bprm_set_creds(struct linux_binprm *bprm);
+int apparmor_bprm_secureexec(struct linux_binprm *bprm);
+void apparmor_bprm_committing_creds(struct linux_binprm *bprm);
+void apparmor_bprm_committed_creds(struct linux_binprm *bprm);
+
+void aa_free_domain_entries(struct aa_domain *domain);
+int aa_change_hat(const char *hats[], int count, u64 token, bool permtest);
+int aa_change_profile(const char *ns_name, const char *name, bool onexec,
+		      bool permtest);
+
+#endif /* __AA_DOMAIN_H */
diff --git a/security/apparmor/include/file.h b/security/apparmor/include/file.h
new file mode 100644
index 00000000000..be36feabb16
--- /dev/null
+++ b/security/apparmor/include/file.h
@@ -0,0 +1,217 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor file mediation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_FILE_H
+#define __AA_FILE_H
+
+#include <linux/path.h>
+
+#include "domain.h"
+#include "match.h"
+
+struct aa_profile;
+
+/*
+ * We use MAY_EXEC, MAY_WRITE, MAY_READ, MAY_APPEND and the following flags
+ * for profile permissions
+ */
+#define AA_MAY_CREATE                  0x0010
+#define AA_MAY_DELETE                  0x0020
+#define AA_MAY_META_WRITE              0x0040
+#define AA_MAY_META_READ               0x0080
+
+#define AA_MAY_CHMOD                   0x0100
+#define AA_MAY_CHOWN                   0x0200
+#define AA_MAY_LOCK                    0x0400
+#define AA_EXEC_MMAP                   0x0800
+
+#define AA_MAY_LINK			0x1000
+#define AA_LINK_SUBSET			AA_MAY_LOCK	/* overlaid */
+#define AA_MAY_ONEXEC			0x40000000	/* exec allows onexec */
+#define AA_MAY_CHANGE_PROFILE		0x80000000
+#define AA_MAY_CHANGEHAT		0x80000000	/* ctrl auditing only */
+
+#define AA_AUDIT_FILE_MASK	(MAY_READ | MAY_WRITE | MAY_EXEC | MAY_APPEND |\
+				 AA_MAY_CREATE | AA_MAY_DELETE |	\
+				 AA_MAY_META_READ | AA_MAY_META_WRITE | \
+				 AA_MAY_CHMOD | AA_MAY_CHOWN | AA_MAY_LOCK | \
+				 AA_EXEC_MMAP | AA_MAY_LINK)
+
+/*
+ * The xindex is broken into 3 parts
+ * - index - an index into either the exec name table or the variable table
+ * - exec type - which determines how the executable name and index are used
+ * - flags - which modify how the destination name is applied
+ */
+#define AA_X_INDEX_MASK		0x03ff
+
+#define AA_X_TYPE_MASK		0x0c00
+#define AA_X_TYPE_SHIFT		10
+#define AA_X_NONE		0x0000
+#define AA_X_NAME		0x0400	/* use executable name px */
+#define AA_X_TABLE		0x0800	/* use a specified name ->n# */
+
+#define AA_X_UNSAFE		0x1000
+#define AA_X_CHILD		0x2000	/* make >AA_X_NONE apply to children */
+#define AA_X_INHERIT		0x4000
+#define AA_X_UNCONFINED		0x8000
+
+/* AA_SECURE_X_NEEDED - is passed in the bprm->unsafe field */
+#define AA_SECURE_X_NEEDED	0x8000
+
+/* need to make conditional which ones are being set */
+struct path_cond {
+	uid_t uid;
+	umode_t mode;
+};
+
+/* struct file_perms - file permission
+ * @allow: mask of permissions that are allowed
+ * @audit: mask of permissions to force an audit message for
+ * @quiet: mask of permissions to quiet audit messages for
+ * @kill: mask of permissions that when matched will kill the task
+ * @xindex: exec transition index if @allow contains MAY_EXEC
+ *
+ * The @audit and @queit mask should be mutually exclusive.
+ */
+struct file_perms {
+	u32 allow;
+	u32 audit;
+	u32 quiet;
+	u32 kill;
+	u16 xindex;
+};
+
+extern struct file_perms nullperms;
+
+#define COMBINED_PERM_MASK(X) ((X).allow | (X).audit | (X).quiet | (X).kill)
+
+/* FIXME: split perms from dfa and match this to description
+ *        also add delegation info.
+ */
+static inline u16 dfa_map_xindex(u16 mask)
+{
+	u16 old_index = (mask >> 10) & 0xf;
+	u16 index = 0;
+
+	if (mask & 0x100)
+		index |= AA_X_UNSAFE;
+	if (mask & 0x200)
+		index |= AA_X_INHERIT;
+	if (mask & 0x80)
+		index |= AA_X_UNCONFINED;
+
+	if (old_index == 1) {
+		index |= AA_X_UNCONFINED;
+	} else if (old_index == 2) {
+		index |= AA_X_NAME;
+	} else if (old_index == 3) {
+		index |= AA_X_NAME | AA_X_CHILD;
+	} else {
+		index |= AA_X_TABLE;
+		index |= old_index - 4;
+	}
+
+	return index;
+}
+
+/*
+ * map old dfa inline permissions to new format
+ */
+#define dfa_user_allow(dfa, state) (((ACCEPT_TABLE(dfa)[state]) & 0x7f) | \
+				    ((ACCEPT_TABLE(dfa)[state]) & 0x80000000))
+#define dfa_user_audit(dfa, state) ((ACCEPT_TABLE2(dfa)[state]) & 0x7f)
+#define dfa_user_quiet(dfa, state) (((ACCEPT_TABLE2(dfa)[state]) >> 7) & 0x7f)
+#define dfa_user_xindex(dfa, state) \
+	(dfa_map_xindex(ACCEPT_TABLE(dfa)[state] & 0x3fff))
+
+#define dfa_other_allow(dfa, state) ((((ACCEPT_TABLE(dfa)[state]) >> 14) & \
+				      0x7f) |				\
+				     ((ACCEPT_TABLE(dfa)[state]) & 0x80000000))
+#define dfa_other_audit(dfa, state) (((ACCEPT_TABLE2(dfa)[state]) >> 14) & 0x7f)
+#define dfa_other_quiet(dfa, state) \
+	((((ACCEPT_TABLE2(dfa)[state]) >> 7) >> 14) & 0x7f)
+#define dfa_other_xindex(dfa, state) \
+	dfa_map_xindex((ACCEPT_TABLE(dfa)[state] >> 14) & 0x3fff)
+
+int aa_audit_file(struct aa_profile *profile, struct file_perms *perms,
+		  gfp_t gfp, int op, u32 request, const char *name,
+		  const char *target, uid_t ouid, const char *info, int error);
+
+/**
+ * struct aa_file_rules - components used for file rule permissions
+ * @dfa: dfa to match path names and conditionals against
+ * @perms: permission table indexed by the matched state accept entry of @dfa
+ * @trans: transition table for indexed by named x transitions
+ *
+ * File permission are determined by matching a path against @dfa and then
+ * then using the value of the accept entry for the matching state as
+ * an index into @perms.  If a named exec transition is required it is
+ * looked up in the transition table.
+ */
+struct aa_file_rules {
+	unsigned int start;
+	struct aa_dfa *dfa;
+	/* struct perms perms; */
+	struct aa_domain trans;
+	/* TODO: add delegate table */
+};
+
+unsigned int aa_str_perms(struct aa_dfa *dfa, unsigned int start,
+			  const char *name, struct path_cond *cond,
+			  struct file_perms *perms);
+
+int aa_path_perm(int op, struct aa_profile *profile, struct path *path,
+		 int flags, u32 request, struct path_cond *cond);
+
+int aa_path_link(struct aa_profile *profile, struct dentry *old_dentry,
+		 struct path *new_dir, struct dentry *new_dentry);
+
+int aa_file_perm(int op, struct aa_profile *profile, struct file *file,
+		 u32 request);
+
+static inline void aa_free_file_rules(struct aa_file_rules *rules)
+{
+	aa_put_dfa(rules->dfa);
+	aa_free_domain_entries(&rules->trans);
+}
+
+#define ACC_FMODE(x) (("\000\004\002\006"[(x)&O_ACCMODE]) | (((x) << 1) & 0x40))
+
+/* from namei.c */
+#define MAP_OPEN_FLAGS(x) ((((x) + 1) & O_ACCMODE) ? (x) + 1 : (x))
+
+/**
+ * aa_map_file_perms - map file flags to AppArmor permissions
+ * @file: open file to map flags to AppArmor permissions
+ *
+ * Returns: apparmor permission set for the file
+ */
+static inline u32 aa_map_file_to_perms(struct file *file)
+{
+	int flags = MAP_OPEN_FLAGS(file->f_flags);
+	u32 perms = ACC_FMODE(file->f_mode);
+
+	if ((flags & O_APPEND) && (perms & MAY_WRITE))
+		perms = (perms & ~MAY_WRITE) | MAY_APPEND;
+	/* trunc implies write permission */
+	if (flags & O_TRUNC)
+		perms |= MAY_WRITE;
+	if (flags & O_CREAT)
+		perms |= AA_MAY_CREATE;
+
+	return perms;
+}
+
+#endif /* __AA_FILE_H */
diff --git a/security/apparmor/include/ipc.h b/security/apparmor/include/ipc.h
new file mode 100644
index 00000000000..aeda0fbc8b2
--- /dev/null
+++ b/security/apparmor/include/ipc.h
@@ -0,0 +1,28 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor ipc mediation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_IPC_H
+#define __AA_IPC_H
+
+#include <linux/sched.h>
+
+struct aa_profile;
+
+int aa_may_ptrace(struct task_struct *tracer_task, struct aa_profile *tracer,
+		  struct aa_profile *tracee, unsigned int mode);
+
+int aa_ptrace(struct task_struct *tracer, struct task_struct *tracee,
+	      unsigned int mode);
+
+#endif /* __AA_IPC_H */
diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h
new file mode 100644
index 00000000000..734a6d35112
--- /dev/null
+++ b/security/apparmor/include/match.h
@@ -0,0 +1,132 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy dfa matching engine definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_MATCH_H
+#define __AA_MATCH_H
+
+#include <linux/workqueue.h>
+
+#define DFA_NOMATCH			0
+#define DFA_START			1
+
+#define DFA_VALID_PERM_MASK		0xffffffff
+#define DFA_VALID_PERM2_MASK		0xffffffff
+
+/**
+ * The format used for transition tables is based on the GNU flex table
+ * file format (--tables-file option; see Table File Format in the flex
+ * info pages and the flex sources for documentation). The magic number
+ * used in the header is 0x1B5E783D insted of 0xF13C57B1 though, because
+ * the YY_ID_CHK (check) and YY_ID_DEF (default) tables are used
+ * slightly differently (see the apparmor-parser package).
+ */
+
+#define YYTH_MAGIC	0x1B5E783D
+#define YYTH_DEF_RECURSE 0x1			/* DEF Table is recursive */
+
+struct table_set_header {
+	u32 th_magic;		/* YYTH_MAGIC */
+	u32 th_hsize;
+	u32 th_ssize;
+	u16 th_flags;
+	char th_version[];
+};
+
+/* The YYTD_ID are one less than flex table mappings.  The flex id
+ * has 1 subtracted at table load time, this allows us to directly use the
+ * ID's as indexes.
+ */
+#define	YYTD_ID_ACCEPT	0
+#define YYTD_ID_BASE	1
+#define YYTD_ID_CHK	2
+#define YYTD_ID_DEF	3
+#define YYTD_ID_EC	4
+#define YYTD_ID_META	5
+#define YYTD_ID_ACCEPT2 6
+#define YYTD_ID_NXT	7
+#define YYTD_ID_TSIZE	8
+
+#define YYTD_DATA8	1
+#define YYTD_DATA16	2
+#define YYTD_DATA32	4
+#define YYTD_DATA64	8
+
+/* Each ACCEPT2 table gets 6 dedicated flags, YYTD_DATAX define the
+ * first flags
+ */
+#define ACCEPT1_FLAGS(X) ((X) & 0x3f)
+#define ACCEPT2_FLAGS(X) ACCEPT1_FLAGS((X) >> YYTD_ID_ACCEPT2)
+#define TO_ACCEPT1_FLAG(X) ACCEPT1_FLAGS(X)
+#define TO_ACCEPT2_FLAG(X) (ACCEPT1_FLAGS(X) << YYTD_ID_ACCEPT2)
+#define DFA_FLAG_VERIFY_STATES 0x1000
+
+struct table_header {
+	u16 td_id;
+	u16 td_flags;
+	u32 td_hilen;
+	u32 td_lolen;
+	char td_data[];
+};
+
+#define DEFAULT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_DEF]->td_data))
+#define BASE_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_BASE]->td_data))
+#define NEXT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_NXT]->td_data))
+#define CHECK_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_CHK]->td_data))
+#define EQUIV_TABLE(DFA) ((u8 *)((DFA)->tables[YYTD_ID_EC]->td_data))
+#define ACCEPT_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT]->td_data))
+#define ACCEPT_TABLE2(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT2]->td_data))
+
+struct aa_dfa {
+	struct kref count;
+	u16 flags;
+	struct table_header *tables[YYTD_ID_TSIZE];
+};
+
+#define byte_to_byte(X) (X)
+
+#define UNPACK_ARRAY(TABLE, BLOB, LEN, TYPE, NTOHX) \
+	do { \
+		typeof(LEN) __i; \
+		TYPE *__t = (TYPE *) TABLE; \
+		TYPE *__b = (TYPE *) BLOB; \
+		for (__i = 0; __i < LEN; __i++) { \
+			__t[__i] = NTOHX(__b[__i]); \
+		} \
+	} while (0)
+
+static inline size_t table_size(size_t len, size_t el_size)
+{
+	return ALIGN(sizeof(struct table_header) + len * el_size, 8);
+}
+
+struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags);
+unsigned int aa_dfa_match_len(struct aa_dfa *dfa, unsigned int start,
+			      const char *str, int len);
+unsigned int aa_dfa_match(struct aa_dfa *dfa, unsigned int start,
+			  const char *str);
+void aa_dfa_free_kref(struct kref *kref);
+
+/**
+ * aa_put_dfa - put a dfa refcount
+ * @dfa: dfa to put refcount   (MAYBE NULL)
+ *
+ * Requires: if @dfa != NULL that a valid refcount be held
+ */
+static inline void aa_put_dfa(struct aa_dfa *dfa)
+{
+	if (dfa)
+		kref_put(&dfa->count, aa_dfa_free_kref);
+}
+
+#endif /* __AA_MATCH_H */
diff --git a/security/apparmor/include/path.h b/security/apparmor/include/path.h
new file mode 100644
index 00000000000..27b327a7fae
--- /dev/null
+++ b/security/apparmor/include/path.h
@@ -0,0 +1,31 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor basic path manipulation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_PATH_H
+#define __AA_PATH_H
+
+
+enum path_flags {
+	PATH_IS_DIR = 0x1,		/* path is a directory */
+	PATH_CONNECT_PATH = 0x4,	/* connect disconnected paths to / */
+	PATH_CHROOT_REL = 0x8,		/* do path lookup relative to chroot */
+	PATH_CHROOT_NSCONNECT = 0x10,	/* connect paths that are at ns root */
+
+	PATH_DELEGATE_DELETED = 0x08000, /* delegate deleted files */
+	PATH_MEDIATE_DELETED = 0x10000,	/* mediate deleted paths */
+};
+
+int aa_get_name(struct path *path, int flags, char **buffer, const char **name);
+
+#endif /* __AA_PATH_H */
diff --git a/security/apparmor/include/policy.h b/security/apparmor/include/policy.h
new file mode 100644
index 00000000000..aeda5cf5690
--- /dev/null
+++ b/security/apparmor/include/policy.h
@@ -0,0 +1,305 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_POLICY_H
+#define __AA_POLICY_H
+
+#include <linux/capability.h>
+#include <linux/cred.h>
+#include <linux/kref.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/socket.h>
+
+#include "apparmor.h"
+#include "audit.h"
+#include "capability.h"
+#include "domain.h"
+#include "file.h"
+#include "resource.h"
+
+extern const char *profile_mode_names[];
+#define APPARMOR_NAMES_MAX_INDEX 3
+
+#define COMPLAIN_MODE(_profile)	\
+	((aa_g_profile_mode == APPARMOR_COMPLAIN) || \
+	 ((_profile)->mode == APPARMOR_COMPLAIN))
+
+#define KILL_MODE(_profile) \
+	((aa_g_profile_mode == APPARMOR_KILL) || \
+	 ((_profile)->mode == APPARMOR_KILL))
+
+#define PROFILE_IS_HAT(_profile) ((_profile)->flags & PFLAG_HAT)
+
+/*
+ * FIXME: currently need a clean way to replace and remove profiles as a
+ * set.  It should be done at the namespace level.
+ * Either, with a set of profiles loaded at the namespace level or via
+ * a mark and remove marked interface.
+ */
+enum profile_mode {
+	APPARMOR_ENFORCE,	/* enforce access rules */
+	APPARMOR_COMPLAIN,	/* allow and log access violations */
+	APPARMOR_KILL,		/* kill task on access violation */
+};
+
+enum profile_flags {
+	PFLAG_HAT = 1,			/* profile is a hat */
+	PFLAG_UNCONFINED = 2,		/* profile is an unconfined profile */
+	PFLAG_NULL = 4,			/* profile is null learning profile */
+	PFLAG_IX_ON_NAME_ERROR = 8,	/* fallback to ix on name lookup fail */
+	PFLAG_IMMUTABLE = 0x10,		/* don't allow changes/replacement */
+	PFLAG_USER_DEFINED = 0x20,	/* user based profile - lower privs */
+	PFLAG_NO_LIST_REF = 0x40,	/* list doesn't keep profile ref */
+	PFLAG_OLD_NULL_TRANS = 0x100,	/* use // as the null transition */
+
+	/* These flags must correspond with PATH_flags */
+	PFLAG_MEDIATE_DELETED = 0x10000, /* mediate instead delegate deleted */
+};
+
+struct aa_profile;
+
+/* struct aa_policy - common part of both namespaces and profiles
+ * @name: name of the object
+ * @hname - The hierarchical name
+ * @count: reference count of the obj
+ * @list: list policy object is on
+ * @profiles: head of the profiles list contained in the object
+ */
+struct aa_policy {
+	char *name;
+	char *hname;
+	struct kref count;
+	struct list_head list;
+	struct list_head profiles;
+};
+
+/* struct aa_ns_acct - accounting of profiles in namespace
+ * @max_size: maximum space allowed for all profiles in namespace
+ * @max_count: maximum number of profiles that can be in this namespace
+ * @size: current size of profiles
+ * @count: current count of profiles (includes null profiles)
+ */
+struct aa_ns_acct {
+	int max_size;
+	int max_count;
+	int size;
+	int count;
+};
+
+/* struct aa_namespace - namespace for a set of profiles
+ * @base: common policy
+ * @parent: parent of namespace
+ * @lock: lock for modifying the object
+ * @acct: accounting for the namespace
+ * @unconfined: special unconfined profile for the namespace
+ * @sub_ns: list of namespaces under the current namespace.
+ *
+ * An aa_namespace defines the set profiles that are searched to determine
+ * which profile to attach to a task.  Profiles can not be shared between
+ * aa_namespaces and profile names within a namespace are guaranteed to be
+ * unique.  When profiles in separate namespaces have the same name they
+ * are NOT considered to be equivalent.
+ *
+ * Namespaces are hierarchical and only namespaces and profiles below the
+ * current namespace are visible.
+ *
+ * Namespace names must be unique and can not contain the characters :/\0
+ *
+ * FIXME TODO: add vserver support of namespaces (can it all be done in
+ *             userspace?)
+ */
+struct aa_namespace {
+	struct aa_policy base;
+	struct aa_namespace *parent;
+	rwlock_t lock;
+	struct aa_ns_acct acct;
+	struct aa_profile *unconfined;
+	struct list_head sub_ns;
+};
+
+/* struct aa_profile - basic confinement data
+ * @base - base components of the profile (name, refcount, lists, lock ...)
+ * @parent: parent of profile
+ * @ns: namespace the profile is in
+ * @replacedby: is set to the profile that replaced this profile
+ * @rename: optional profile name that this profile renamed
+ * @xmatch: optional extended matching for unconfined executables names
+ * @xmatch_len: xmatch prefix len, used to determine xmatch priority
+ * @sid: the unique security id number of this profile
+ * @audit: the auditing mode of the profile
+ * @mode: the enforcement mode of the profile
+ * @flags: flags controlling profile behavior
+ * @path_flags: flags controlling path generation behavior
+ * @size: the memory consumed by this profiles rules
+ * @file: The set of rules governing basic file access and domain transitions
+ * @caps: capabilities for the profile
+ * @rlimits: rlimits for the profile
+ *
+ * The AppArmor profile contains the basic confinement data.  Each profile
+ * has a name, and exists in a namespace.  The @name and @exec_match are
+ * used to determine profile attachment against unconfined tasks.  All other
+ * attachments are determined by profile X transition rules.
+ *
+ * The @replacedby field is write protected by the profile lock.  Reads
+ * are assumed to be atomic, and are done without locking.
+ *
+ * Profiles have a hierarchy where hats and children profiles keep
+ * a reference to their parent.
+ *
+ * Profile names can not begin with a : and can not contain the \0
+ * character.  If a profile name begins with / it will be considered when
+ * determining profile attachment on "unconfined" tasks.
+ */
+struct aa_profile {
+	struct aa_policy base;
+	struct aa_profile *parent;
+
+	struct aa_namespace *ns;
+	struct aa_profile *replacedby;
+	const char *rename;
+
+	struct aa_dfa *xmatch;
+	int xmatch_len;
+	u32 sid;
+	enum audit_mode audit;
+	enum profile_mode mode;
+	u32 flags;
+	u32 path_flags;
+	int size;
+
+	struct aa_file_rules file;
+	struct aa_caps caps;
+	struct aa_rlimit rlimits;
+};
+
+extern struct aa_namespace *root_ns;
+extern enum profile_mode aa_g_profile_mode;
+
+void aa_add_profile(struct aa_policy *common, struct aa_profile *profile);
+
+bool aa_ns_visible(struct aa_namespace *curr, struct aa_namespace *view);
+const char *aa_ns_name(struct aa_namespace *parent, struct aa_namespace *child);
+int aa_alloc_root_ns(void);
+void aa_free_root_ns(void);
+void aa_free_namespace_kref(struct kref *kref);
+
+struct aa_namespace *aa_find_namespace(struct aa_namespace *root,
+				       const char *name);
+
+static inline struct aa_policy *aa_get_common(struct aa_policy *c)
+{
+	if (c)
+		kref_get(&c->count);
+
+	return c;
+}
+
+/**
+ * aa_get_namespace - increment references count on @ns
+ * @ns: namespace to increment reference count of (MAYBE NULL)
+ *
+ * Returns: pointer to @ns, if @ns is NULL returns NULL
+ * Requires: @ns must be held with valid refcount when called
+ */
+static inline struct aa_namespace *aa_get_namespace(struct aa_namespace *ns)
+{
+	if (ns)
+		kref_get(&(ns->base.count));
+
+	return ns;
+}
+
+/**
+ * aa_put_namespace - decrement refcount on @ns
+ * @ns: namespace to put reference of
+ *
+ * Decrement reference count of @ns and if no longer in use free it
+ */
+static inline void aa_put_namespace(struct aa_namespace *ns)
+{
+	if (ns)
+		kref_put(&ns->base.count, aa_free_namespace_kref);
+}
+
+struct aa_profile *aa_alloc_profile(const char *name);
+struct aa_profile *aa_new_null_profile(struct aa_profile *parent, int hat);
+void aa_free_profile_kref(struct kref *kref);
+struct aa_profile *aa_find_child(struct aa_profile *parent, const char *name);
+struct aa_profile *aa_lookup_profile(struct aa_namespace *ns, const char *name);
+struct aa_profile *aa_match_profile(struct aa_namespace *ns, const char *name);
+
+ssize_t aa_replace_profiles(void *udata, size_t size, bool noreplace);
+ssize_t aa_remove_profiles(char *name, size_t size);
+
+#define PROF_ADD 1
+#define PROF_REPLACE 0
+
+#define unconfined(X) ((X)->flags & PFLAG_UNCONFINED)
+
+/**
+ * aa_newest_version - find the newest version of @profile
+ * @profile: the profile to check for newer versions of (NOT NULL)
+ *
+ * Returns: newest version of @profile, if @profile is the newest version
+ *          return @profile.
+ *
+ * NOTE: the profile returned is not refcounted, The refcount on @profile
+ * must be held until the caller decides what to do with the returned newest
+ * version.
+ */
+static inline struct aa_profile *aa_newest_version(struct aa_profile *profile)
+{
+	while (profile->replacedby)
+		profile = profile->replacedby;
+
+	return profile;
+}
+
+/**
+ * aa_get_profile - increment refcount on profile @p
+ * @p: profile  (MAYBE NULL)
+ *
+ * Returns: pointer to @p if @p is NULL will return NULL
+ * Requires: @p must be held with valid refcount when called
+ */
+static inline struct aa_profile *aa_get_profile(struct aa_profile *p)
+{
+	if (p)
+		kref_get(&(p->base.count));
+
+	return p;
+}
+
+/**
+ * aa_put_profile - decrement refcount on profile @p
+ * @p: profile  (MAYBE NULL)
+ */
+static inline void aa_put_profile(struct aa_profile *p)
+{
+	if (p)
+		kref_put(&p->base.count, aa_free_profile_kref);
+}
+
+static inline int AUDIT_MODE(struct aa_profile *profile)
+{
+	if (aa_g_audit != AUDIT_NORMAL)
+		return aa_g_audit;
+
+	return profile->audit;
+}
+
+bool aa_may_manage_policy(int op);
+
+#endif /* __AA_POLICY_H */
diff --git a/security/apparmor/include/policy_unpack.h b/security/apparmor/include/policy_unpack.h
new file mode 100644
index 00000000000..a2dcccac45a
--- /dev/null
+++ b/security/apparmor/include/policy_unpack.h
@@ -0,0 +1,20 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy loading interface function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __POLICY_INTERFACE_H
+#define __POLICY_INTERFACE_H
+
+struct aa_profile *aa_unpack(void *udata, size_t size, const char **ns);
+
+#endif /* __POLICY_INTERFACE_H */
diff --git a/security/apparmor/include/procattr.h b/security/apparmor/include/procattr.h
new file mode 100644
index 00000000000..544aa6b766a
--- /dev/null
+++ b/security/apparmor/include/procattr.h
@@ -0,0 +1,26 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /proc/<pid>/attr/ interface function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_PROCATTR_H
+#define __AA_PROCATTR_H
+
+#define AA_DO_TEST 1
+#define AA_ONEXEC  1
+
+int aa_getprocattr(struct aa_profile *profile, char **string);
+int aa_setprocattr_changehat(char *args, size_t size, int test);
+int aa_setprocattr_changeprofile(char *fqname, bool onexec, int test);
+int aa_setprocattr_permipc(char *fqname);
+
+#endif /* __AA_PROCATTR_H */
diff --git a/security/apparmor/include/resource.h b/security/apparmor/include/resource.h
new file mode 100644
index 00000000000..3c88be94649
--- /dev/null
+++ b/security/apparmor/include/resource.h
@@ -0,0 +1,46 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor resource limits function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_RESOURCE_H
+#define __AA_RESOURCE_H
+
+#include <linux/resource.h>
+#include <linux/sched.h>
+
+struct aa_profile;
+
+/* struct aa_rlimit - rlimit settings for the profile
+ * @mask: which hard limits to set
+ * @limits: rlimit values that override task limits
+ *
+ * AppArmor rlimits are used to set confined task rlimits.  Only the
+ * limits specified in @mask will be controlled by apparmor.
+ */
+struct aa_rlimit {
+	unsigned int mask;
+	struct rlimit limits[RLIM_NLIMITS];
+};
+
+int aa_map_resource(int resource);
+int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
+		      struct rlimit *new_rlim);
+
+void __aa_transition_rlimits(struct aa_profile *old, struct aa_profile *new);
+
+static inline void aa_free_rlimit_rules(struct aa_rlimit *rlims)
+{
+	/* NOP */
+}
+
+#endif /* __AA_RESOURCE_H */
diff --git a/security/apparmor/include/sid.h b/security/apparmor/include/sid.h
new file mode 100644
index 00000000000..020db35c301
--- /dev/null
+++ b/security/apparmor/include/sid.h
@@ -0,0 +1,24 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security identifier (sid) definitions
+ *
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_SID_H
+#define __AA_SID_H
+
+#include <linux/types.h>
+
+struct aa_profile;
+
+u32 aa_alloc_sid(void);
+void aa_free_sid(u32 sid);
+
+#endif /* __AA_SID_H */
diff --git a/security/apparmor/ipc.c b/security/apparmor/ipc.c
new file mode 100644
index 00000000000..649fad88869
--- /dev/null
+++ b/security/apparmor/ipc.c
@@ -0,0 +1,114 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor ipc mediation
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/gfp.h>
+#include <linux/ptrace.h>
+
+#include "include/audit.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/policy.h"
+
+/* call back to audit ptrace fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	audit_log_format(ab, " target=");
+	audit_log_untrustedstring(ab, sa->aad.target);
+}
+
+/**
+ * aa_audit_ptrace - do auditing for ptrace
+ * @profile: profile being enforced  (NOT NULL)
+ * @target: profile being traced (NOT NULL)
+ * @error: error condition
+ *
+ * Returns: %0 or error code
+ */
+static int aa_audit_ptrace(struct aa_profile *profile,
+			   struct aa_profile *target, int error)
+{
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = OP_PTRACE;
+	sa.aad.target = target;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_AUTO, profile, GFP_ATOMIC, &sa,
+			audit_cb);
+}
+
+/**
+ * aa_may_ptrace - test if tracer task can trace the tracee
+ * @tracer_task: task who will do the tracing  (NOT NULL)
+ * @tracer: profile of the task doing the tracing  (NOT NULL)
+ * @tracee: task to be traced
+ * @mode: whether PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+ *
+ * Returns: %0 else error code if permission denied or error
+ */
+int aa_may_ptrace(struct task_struct *tracer_task, struct aa_profile *tracer,
+		  struct aa_profile *tracee, unsigned int mode)
+{
+	/* TODO: currently only based on capability, not extended ptrace
+	 *       rules,
+	 *       Test mode for PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+	 */
+
+	if (unconfined(tracer) || tracer == tracee)
+		return 0;
+	/* log this capability request */
+	return aa_capable(tracer_task, tracer, CAP_SYS_PTRACE, 1);
+}
+
+/**
+ * aa_ptrace - do ptrace permission check and auditing
+ * @tracer: task doing the tracing (NOT NULL)
+ * @tracee: task being traced (NOT NULL)
+ * @mode: ptrace mode either PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+ *
+ * Returns: %0 else error code if permission denied or error
+ */
+int aa_ptrace(struct task_struct *tracer, struct task_struct *tracee,
+	      unsigned int mode)
+{
+	/*
+	 * tracer can ptrace tracee when
+	 * - tracer is unconfined ||
+	 *   - tracer is in complain mode
+	 *   - tracer has rules allowing it to trace tracee currently this is:
+	 *       - confined by the same profile ||
+	 *       - tracer profile has CAP_SYS_PTRACE
+	 */
+
+	struct aa_profile *tracer_p;
+	/* cred released below */
+	const struct cred *cred = get_task_cred(tracer);
+	int error = 0;
+	tracer_p = aa_cred_profile(cred);
+
+	if (!unconfined(tracer_p)) {
+		/* lcred released below */
+		const struct cred *lcred = get_task_cred(tracee);
+		struct aa_profile *tracee_p = aa_cred_profile(lcred);
+
+		error = aa_may_ptrace(tracer, tracer_p, tracee_p, mode);
+		error = aa_audit_ptrace(tracer_p, tracee_p, error);
+
+		put_cred(lcred);
+	}
+	put_cred(cred);
+
+	return error;
+}
diff --git a/security/apparmor/lib.c b/security/apparmor/lib.c
new file mode 100644
index 00000000000..6e85cdb4303
--- /dev/null
+++ b/security/apparmor/lib.c
@@ -0,0 +1,133 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains basic common functions used in AppArmor
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+
+#include "include/audit.h"
+
+
+/**
+ * aa_split_fqname - split a fqname into a profile and namespace name
+ * @fqname: a full qualified name in namespace profile format (NOT NULL)
+ * @ns_name: pointer to portion of the string containing the ns name (NOT NULL)
+ *
+ * Returns: profile name or NULL if one is not specified
+ *
+ * Split a namespace name from a profile name (see policy.c for naming
+ * description).  If a portion of the name is missing it returns NULL for
+ * that portion.
+ *
+ * NOTE: may modify the @fqname string.  The pointers returned point
+ *       into the @fqname string.
+ */
+char *aa_split_fqname(char *fqname, char **ns_name)
+{
+	char *name = strim(fqname);
+
+	*ns_name = NULL;
+	if (name[0] == ':') {
+		char *split = strchr(&name[1], ':');
+		if (split) {
+			/* overwrite ':' with \0 */
+			*split = 0;
+			name = skip_spaces(split + 1);
+		} else
+			/* a ns name without a following profile is allowed */
+			name = NULL;
+		*ns_name = &name[1];
+	}
+	if (name && *name == 0)
+		name = NULL;
+
+	return name;
+}
+
+/**
+ * aa_info_message - log a none profile related status message
+ * @str: message to log
+ */
+void aa_info_message(const char *str)
+{
+	if (audit_enabled) {
+		struct common_audit_data sa;
+		COMMON_AUDIT_DATA_INIT(&sa, NONE);
+		sa.aad.info = str;
+		aa_audit_msg(AUDIT_APPARMOR_STATUS, &sa, NULL);
+	}
+	printk(KERN_INFO "AppArmor: %s\n", str);
+}
+
+/**
+ * kvmalloc - do allocation preferring kmalloc but falling back to vmalloc
+ * @size: size of allocation
+ *
+ * Return: allocated buffer or NULL if failed
+ *
+ * It is possible that policy being loaded from the user is larger than
+ * what can be allocated by kmalloc, in those cases fall back to vmalloc.
+ */
+void *kvmalloc(size_t size)
+{
+	void *buffer = NULL;
+
+	if (size == 0)
+		return NULL;
+
+	/* do not attempt kmalloc if we need more than 16 pages at once */
+	if (size <= (16*PAGE_SIZE))
+		buffer = kmalloc(size, GFP_NOIO | __GFP_NOWARN);
+	if (!buffer) {
+		/* see kvfree for why size must be at least work_struct size
+		 * when allocated via vmalloc
+		 */
+		if (size < sizeof(struct work_struct))
+			size = sizeof(struct work_struct);
+		buffer = vmalloc(size);
+	}
+	return buffer;
+}
+
+/**
+ * do_vfree - workqueue routine for freeing vmalloced memory
+ * @work: data to be freed
+ *
+ * The work_struct is overlaid to the data being freed, as at the point
+ * the work is scheduled the data is no longer valid, be its freeing
+ * needs to be delayed until safe.
+ */
+static void do_vfree(struct work_struct *work)
+{
+	vfree(work);
+}
+
+/**
+ * kvfree - free an allocation do by kvmalloc
+ * @buffer: buffer to free (MAYBE_NULL)
+ *
+ * Free a buffer allocated by kvmalloc
+ */
+void kvfree(void *buffer)
+{
+	if (is_vmalloc_addr(buffer)) {
+		/* Data is no longer valid so just use the allocated space
+		 * as the work_struct
+		 */
+		struct work_struct *work = (struct work_struct *) buffer;
+		INIT_WORK(work, do_vfree);
+		schedule_work(work);
+	} else
+		kfree(buffer);
+}
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
new file mode 100644
index 00000000000..8db33a8b50c
--- /dev/null
+++ b/security/apparmor/lsm.c
@@ -0,0 +1,938 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor LSM hooks.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/security.h>
+#include <linux/moduleparam.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/ptrace.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+#include <linux/audit.h>
+#include <net/sock.h>
+
+#include "include/apparmor.h"
+#include "include/apparmorfs.h"
+#include "include/audit.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/path.h"
+#include "include/policy.h"
+#include "include/procattr.h"
+
+/* Flag indicating whether initialization completed */
+int apparmor_initialized __initdata;
+
+/*
+ * LSM hook functions
+ */
+
+/*
+ * free the associated aa_task_cxt and put its profiles
+ */
+static void apparmor_cred_free(struct cred *cred)
+{
+	aa_free_task_context(cred->security);
+	cred->security = NULL;
+}
+
+/*
+ * allocate the apparmor part of blank credentials
+ */
+static int apparmor_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+	/* freed by apparmor_cred_free */
+	struct aa_task_cxt *cxt = aa_alloc_task_context(gfp);
+	if (!cxt)
+		return -ENOMEM;
+
+	cred->security = cxt;
+	return 0;
+}
+
+/*
+ * prepare new aa_task_cxt for modification by prepare_cred block
+ */
+static int apparmor_cred_prepare(struct cred *new, const struct cred *old,
+				 gfp_t gfp)
+{
+	/* freed by apparmor_cred_free */
+	struct aa_task_cxt *cxt = aa_alloc_task_context(gfp);
+	if (!cxt)
+		return -ENOMEM;
+
+	aa_dup_task_context(cxt, old->security);
+	new->security = cxt;
+	return 0;
+}
+
+/*
+ * transfer the apparmor data to a blank set of creds
+ */
+static void apparmor_cred_transfer(struct cred *new, const struct cred *old)
+{
+	const struct aa_task_cxt *old_cxt = old->security;
+	struct aa_task_cxt *new_cxt = new->security;
+
+	aa_dup_task_context(new_cxt, old_cxt);
+}
+
+static int apparmor_ptrace_access_check(struct task_struct *child,
+					unsigned int mode)
+{
+	int error = cap_ptrace_access_check(child, mode);
+	if (error)
+		return error;
+
+	return aa_ptrace(current, child, mode);
+}
+
+static int apparmor_ptrace_traceme(struct task_struct *parent)
+{
+	int error = cap_ptrace_traceme(parent);
+	if (error)
+		return error;
+
+	return aa_ptrace(parent, current, PTRACE_MODE_ATTACH);
+}
+
+/* Derived from security/commoncap.c:cap_capget */
+static int apparmor_capget(struct task_struct *target, kernel_cap_t *effective,
+			   kernel_cap_t *inheritable, kernel_cap_t *permitted)
+{
+	struct aa_profile *profile;
+	const struct cred *cred;
+
+	rcu_read_lock();
+	cred = __task_cred(target);
+	profile = aa_cred_profile(cred);
+
+	*effective = cred->cap_effective;
+	*inheritable = cred->cap_inheritable;
+	*permitted = cred->cap_permitted;
+
+	if (!unconfined(profile)) {
+		*effective = cap_intersect(*effective, profile->caps.allow);
+		*permitted = cap_intersect(*permitted, profile->caps.allow);
+	}
+	rcu_read_unlock();
+
+	return 0;
+}
+
+static int apparmor_capable(struct task_struct *task, const struct cred *cred,
+			    int cap, int audit)
+{
+	struct aa_profile *profile;
+	/* cap_capable returns 0 on success, else -EPERM */
+	int error = cap_capable(task, cred, cap, audit);
+	if (!error) {
+		profile = aa_cred_profile(cred);
+		if (!unconfined(profile))
+			error = aa_capable(task, profile, cap, audit);
+	}
+	return error;
+}
+
+/**
+ * common_perm - basic common permission check wrapper fn for paths
+ * @op: operation being checked
+ * @path: path to check permission of  (NOT NULL)
+ * @mask: requested permissions mask
+ * @cond: conditional info for the permission request  (NOT NULL)
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm(int op, struct path *path, u32 mask,
+		       struct path_cond *cond)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	profile = __aa_current_profile();
+	if (!unconfined(profile))
+		error = aa_path_perm(op, profile, path, 0, mask, cond);
+
+	return error;
+}
+
+/**
+ * common_perm_dir_dentry - common permission wrapper when path is dir, dentry
+ * @op: operation being checked
+ * @dir: directory of the dentry  (NOT NULL)
+ * @dentry: dentry to check  (NOT NULL)
+ * @mask: requested permissions mask
+ * @cond: conditional info for the permission request  (NOT NULL)
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_dir_dentry(int op, struct path *dir,
+				  struct dentry *dentry, u32 mask,
+				  struct path_cond *cond)
+{
+	struct path path = { dir->mnt, dentry };
+
+	return common_perm(op, &path, mask, cond);
+}
+
+/**
+ * common_perm_mnt_dentry - common permission wrapper when mnt, dentry
+ * @op: operation being checked
+ * @mnt: mount point of dentry (NOT NULL)
+ * @dentry: dentry to check  (NOT NULL)
+ * @mask: requested permissions mask
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_mnt_dentry(int op, struct vfsmount *mnt,
+				  struct dentry *dentry, u32 mask)
+{
+	struct path path = { mnt, dentry };
+	struct path_cond cond = { dentry->d_inode->i_uid,
+				  dentry->d_inode->i_mode
+	};
+
+	return common_perm(op, &path, mask, &cond);
+}
+
+/**
+ * common_perm_rm - common permission wrapper for operations doing rm
+ * @op: operation being checked
+ * @dir: directory that the dentry is in  (NOT NULL)
+ * @dentry: dentry being rm'd  (NOT NULL)
+ * @mask: requested permission mask
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_rm(int op, struct path *dir,
+			  struct dentry *dentry, u32 mask)
+{
+	struct inode *inode = dentry->d_inode;
+	struct path_cond cond = { };
+
+	if (!inode || !dir->mnt || !mediated_filesystem(inode))
+		return 0;
+
+	cond.uid = inode->i_uid;
+	cond.mode = inode->i_mode;
+
+	return common_perm_dir_dentry(op, dir, dentry, mask, &cond);
+}
+
+/**
+ * common_perm_create - common permission wrapper for operations doing create
+ * @op: operation being checked
+ * @dir: directory that dentry will be created in  (NOT NULL)
+ * @dentry: dentry to create   (NOT NULL)
+ * @mask: request permission mask
+ * @mode: created file mode
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_create(int op, struct path *dir, struct dentry *dentry,
+			      u32 mask, umode_t mode)
+{
+	struct path_cond cond = { current_fsuid(), mode };
+
+	if (!dir->mnt || !mediated_filesystem(dir->dentry->d_inode))
+		return 0;
+
+	return common_perm_dir_dentry(op, dir, dentry, mask, &cond);
+}
+
+static int apparmor_path_unlink(struct path *dir, struct dentry *dentry)
+{
+	return common_perm_rm(OP_UNLINK, dir, dentry, AA_MAY_DELETE);
+}
+
+static int apparmor_path_mkdir(struct path *dir, struct dentry *dentry,
+			       int mode)
+{
+	return common_perm_create(OP_MKDIR, dir, dentry, AA_MAY_CREATE,
+				  S_IFDIR);
+}
+
+static int apparmor_path_rmdir(struct path *dir, struct dentry *dentry)
+{
+	return common_perm_rm(OP_RMDIR, dir, dentry, AA_MAY_DELETE);
+}
+
+static int apparmor_path_mknod(struct path *dir, struct dentry *dentry,
+			       int mode, unsigned int dev)
+{
+	return common_perm_create(OP_MKNOD, dir, dentry, AA_MAY_CREATE, mode);
+}
+
+static int apparmor_path_truncate(struct path *path)
+{
+	struct path_cond cond = { path->dentry->d_inode->i_uid,
+				  path->dentry->d_inode->i_mode
+	};
+
+	if (!path->mnt || !mediated_filesystem(path->dentry->d_inode))
+		return 0;
+
+	return common_perm(OP_TRUNC, path, MAY_WRITE | AA_MAY_META_WRITE,
+			   &cond);
+}
+
+static int apparmor_path_symlink(struct path *dir, struct dentry *dentry,
+				 const char *old_name)
+{
+	return common_perm_create(OP_SYMLINK, dir, dentry, AA_MAY_CREATE,
+				  S_IFLNK);
+}
+
+static int apparmor_path_link(struct dentry *old_dentry, struct path *new_dir,
+			      struct dentry *new_dentry)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(old_dentry->d_inode))
+		return 0;
+
+	profile = aa_current_profile();
+	if (!unconfined(profile))
+		error = aa_path_link(profile, old_dentry, new_dir, new_dentry);
+	return error;
+}
+
+static int apparmor_path_rename(struct path *old_dir, struct dentry *old_dentry,
+				struct path *new_dir, struct dentry *new_dentry)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(old_dentry->d_inode))
+		return 0;
+
+	profile = aa_current_profile();
+	if (!unconfined(profile)) {
+		struct path old_path = { old_dir->mnt, old_dentry };
+		struct path new_path = { new_dir->mnt, new_dentry };
+		struct path_cond cond = { old_dentry->d_inode->i_uid,
+					  old_dentry->d_inode->i_mode
+		};
+
+		error = aa_path_perm(OP_RENAME_SRC, profile, &old_path, 0,
+				     MAY_READ | AA_MAY_META_READ | MAY_WRITE |
+				     AA_MAY_META_WRITE | AA_MAY_DELETE,
+				     &cond);
+		if (!error)
+			error = aa_path_perm(OP_RENAME_DEST, profile, &new_path,
+					     0, MAY_WRITE | AA_MAY_META_WRITE |
+					     AA_MAY_CREATE, &cond);
+
+	}
+	return error;
+}
+
+static int apparmor_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
+			       mode_t mode)
+{
+	if (!mediated_filesystem(dentry->d_inode))
+		return 0;
+
+	return common_perm_mnt_dentry(OP_CHMOD, mnt, dentry, AA_MAY_CHMOD);
+}
+
+static int apparmor_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	struct path_cond cond =  { path->dentry->d_inode->i_uid,
+				   path->dentry->d_inode->i_mode
+	};
+
+	if (!mediated_filesystem(path->dentry->d_inode))
+		return 0;
+
+	return common_perm(OP_CHOWN, path, AA_MAY_CHOWN, &cond);
+}
+
+static int apparmor_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
+{
+	if (!mediated_filesystem(dentry->d_inode))
+		return 0;
+
+	return common_perm_mnt_dentry(OP_GETATTR, mnt, dentry,
+				      AA_MAY_META_READ);
+}
+
+static int apparmor_dentry_open(struct file *file, const struct cred *cred)
+{
+	struct aa_file_cxt *fcxt = file->f_security;
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(file->f_path.dentry->d_inode))
+		return 0;
+
+	/* If in exec, permission is handled by bprm hooks.
+	 * Cache permissions granted by the previous exec check, with
+	 * implicit read and executable mmap which are required to
+	 * actually execute the image.
+	 */
+	if (current->in_execve) {
+		fcxt->allow = MAY_EXEC | MAY_READ | AA_EXEC_MMAP;
+		return 0;
+	}
+
+	profile = aa_cred_profile(cred);
+	if (!unconfined(profile)) {
+		struct inode *inode = file->f_path.dentry->d_inode;
+		struct path_cond cond = { inode->i_uid, inode->i_mode };
+
+		error = aa_path_perm(OP_OPEN, profile, &file->f_path, 0,
+				     aa_map_file_to_perms(file), &cond);
+		/* todo cache full allowed permissions set and state */
+		fcxt->allow = aa_map_file_to_perms(file);
+	}
+
+	return error;
+}
+
+static int apparmor_file_alloc_security(struct file *file)
+{
+	/* freed by apparmor_file_free_security */
+	file->f_security = aa_alloc_file_context(GFP_KERNEL);
+	if (!file->f_security)
+		return -ENOMEM;
+	return 0;
+
+}
+
+static void apparmor_file_free_security(struct file *file)
+{
+	struct aa_file_cxt *cxt = file->f_security;
+
+	aa_free_file_context(cxt);
+}
+
+static int common_file_perm(int op, struct file *file, u32 mask)
+{
+	struct aa_file_cxt *fcxt = file->f_security;
+	struct aa_profile *profile, *fprofile = aa_cred_profile(file->f_cred);
+	int error = 0;
+
+	BUG_ON(!fprofile);
+
+	if (!file->f_path.mnt ||
+	    !mediated_filesystem(file->f_path.dentry->d_inode))
+		return 0;
+
+	profile = __aa_current_profile();
+
+	/* revalidate access, if task is unconfined, or the cached cred
+	 * doesn't match or if the request is for more permissions than
+	 * was granted.
+	 *
+	 * Note: the test for !unconfined(fprofile) is to handle file
+	 *       delegation from unconfined tasks
+	 */
+	if (!unconfined(profile) && !unconfined(fprofile) &&
+	    ((fprofile != profile) || (mask & ~fcxt->allow)))
+		error = aa_file_perm(op, profile, file, mask);
+
+	return error;
+}
+
+static int apparmor_file_permission(struct file *file, int mask)
+{
+	return common_file_perm(OP_FPERM, file, mask);
+}
+
+static int apparmor_file_lock(struct file *file, unsigned int cmd)
+{
+	u32 mask = AA_MAY_LOCK;
+
+	if (cmd == F_WRLCK)
+		mask |= MAY_WRITE;
+
+	return common_file_perm(OP_FLOCK, file, mask);
+}
+
+static int common_mmap(int op, struct file *file, unsigned long prot,
+		       unsigned long flags)
+{
+	struct dentry *dentry;
+	int mask = 0;
+
+	if (!file || !file->f_security)
+		return 0;
+
+	if (prot & PROT_READ)
+		mask |= MAY_READ;
+	/*
+	 * Private mappings don't require write perms since they don't
+	 * write back to the files
+	 */
+	if ((prot & PROT_WRITE) && !(flags & MAP_PRIVATE))
+		mask |= MAY_WRITE;
+	if (prot & PROT_EXEC)
+		mask |= AA_EXEC_MMAP;
+
+	dentry = file->f_path.dentry;
+	return common_file_perm(op, file, mask);
+}
+
+static int apparmor_file_mmap(struct file *file, unsigned long reqprot,
+			      unsigned long prot, unsigned long flags,
+			      unsigned long addr, unsigned long addr_only)
+{
+	int rc = 0;
+
+	/* do DAC check */
+	rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
+	if (rc || addr_only)
+		return rc;
+
+	return common_mmap(OP_FMMAP, file, prot, flags);
+}
+
+static int apparmor_file_mprotect(struct vm_area_struct *vma,
+				  unsigned long reqprot, unsigned long prot)
+{
+	return common_mmap(OP_FMPROT, vma->vm_file, prot,
+			   !(vma->vm_flags & VM_SHARED) ? MAP_PRIVATE : 0);
+}
+
+static int apparmor_getprocattr(struct task_struct *task, char *name,
+				char **value)
+{
+	int error = -ENOENT;
+	struct aa_profile *profile;
+	/* released below */
+	const struct cred *cred = get_task_cred(task);
+	struct aa_task_cxt *cxt = cred->security;
+	profile = aa_cred_profile(cred);
+
+	if (strcmp(name, "current") == 0)
+		error = aa_getprocattr(aa_newest_version(cxt->profile),
+				       value);
+	else if (strcmp(name, "prev") == 0  && cxt->previous)
+		error = aa_getprocattr(aa_newest_version(cxt->previous),
+				       value);
+	else if (strcmp(name, "exec") == 0 && cxt->onexec)
+		error = aa_getprocattr(aa_newest_version(cxt->onexec),
+				       value);
+	else
+		error = -EINVAL;
+
+	put_cred(cred);
+
+	return error;
+}
+
+static int apparmor_setprocattr(struct task_struct *task, char *name,
+				void *value, size_t size)
+{
+	char *command, *args = value;
+	size_t arg_size;
+	int error;
+
+	if (size == 0)
+		return -EINVAL;
+	/* args points to a PAGE_SIZE buffer, AppArmor requires that
+	 * the buffer must be null terminated or have size <= PAGE_SIZE -1
+	 * so that AppArmor can null terminate them
+	 */
+	if (args[size - 1] != '\0') {
+		if (size == PAGE_SIZE)
+			return -EINVAL;
+		args[size] = '\0';
+	}
+
+	/* task can only write its own attributes */
+	if (current != task)
+		return -EACCES;
+
+	args = value;
+	args = strim(args);
+	command = strsep(&args, " ");
+	if (!args)
+		return -EINVAL;
+	args = skip_spaces(args);
+	if (!*args)
+		return -EINVAL;
+
+	arg_size = size - (args - (char *) value);
+	if (strcmp(name, "current") == 0) {
+		if (strcmp(command, "changehat") == 0) {
+			error = aa_setprocattr_changehat(args, arg_size,
+							 !AA_DO_TEST);
+		} else if (strcmp(command, "permhat") == 0) {
+			error = aa_setprocattr_changehat(args, arg_size,
+							 AA_DO_TEST);
+		} else if (strcmp(command, "changeprofile") == 0) {
+			error = aa_setprocattr_changeprofile(args, !AA_ONEXEC,
+							     !AA_DO_TEST);
+		} else if (strcmp(command, "permprofile") == 0) {
+			error = aa_setprocattr_changeprofile(args, !AA_ONEXEC,
+							     AA_DO_TEST);
+		} else if (strcmp(command, "permipc") == 0) {
+			error = aa_setprocattr_permipc(args);
+		} else {
+			struct common_audit_data sa;
+			COMMON_AUDIT_DATA_INIT(&sa, NONE);
+			sa.aad.op = OP_SETPROCATTR;
+			sa.aad.info = name;
+			sa.aad.error = -EINVAL;
+			return aa_audit(AUDIT_APPARMOR_DENIED, NULL, GFP_KERNEL,
+					&sa, NULL);
+		}
+	} else if (strcmp(name, "exec") == 0) {
+		error = aa_setprocattr_changeprofile(args, AA_ONEXEC,
+						     !AA_DO_TEST);
+	} else {
+		/* only support the "current" and "exec" process attributes */
+		return -EINVAL;
+	}
+	if (!error)
+		error = size;
+	return error;
+}
+
+static int apparmor_task_setrlimit(unsigned int resource,
+				   struct rlimit *new_rlim)
+{
+	struct aa_profile *profile = aa_current_profile();
+	int error = 0;
+
+	if (!unconfined(profile))
+		error = aa_task_setrlimit(profile, resource, new_rlim);
+
+	return error;
+}
+
+static struct security_operations apparmor_ops = {
+	.name =				"apparmor",
+
+	.ptrace_access_check =		apparmor_ptrace_access_check,
+	.ptrace_traceme =		apparmor_ptrace_traceme,
+	.capget =			apparmor_capget,
+	.capable =			apparmor_capable,
+
+	.path_link =			apparmor_path_link,
+	.path_unlink =			apparmor_path_unlink,
+	.path_symlink =			apparmor_path_symlink,
+	.path_mkdir =			apparmor_path_mkdir,
+	.path_rmdir =			apparmor_path_rmdir,
+	.path_mknod =			apparmor_path_mknod,
+	.path_rename =			apparmor_path_rename,
+	.path_chmod =			apparmor_path_chmod,
+	.path_chown =			apparmor_path_chown,
+	.path_truncate =		apparmor_path_truncate,
+	.dentry_open =			apparmor_dentry_open,
+	.inode_getattr =                apparmor_inode_getattr,
+
+	.file_permission =		apparmor_file_permission,
+	.file_alloc_security =		apparmor_file_alloc_security,
+	.file_free_security =		apparmor_file_free_security,
+	.file_mmap =			apparmor_file_mmap,
+	.file_mprotect =		apparmor_file_mprotect,
+	.file_lock =			apparmor_file_lock,
+
+	.getprocattr =			apparmor_getprocattr,
+	.setprocattr =			apparmor_setprocattr,
+
+	.cred_alloc_blank =		apparmor_cred_alloc_blank,
+	.cred_free =			apparmor_cred_free,
+	.cred_prepare =			apparmor_cred_prepare,
+	.cred_transfer =		apparmor_cred_transfer,
+
+	.bprm_set_creds =		apparmor_bprm_set_creds,
+	.bprm_committing_creds =	apparmor_bprm_committing_creds,
+	.bprm_committed_creds =		apparmor_bprm_committed_creds,
+	.bprm_secureexec =		apparmor_bprm_secureexec,
+
+	.task_setrlimit =		apparmor_task_setrlimit,
+};
+
+/*
+ * AppArmor sysfs module parameters
+ */
+
+static int param_set_aabool(const char *val, struct kernel_param *kp);
+static int param_get_aabool(char *buffer, struct kernel_param *kp);
+#define param_check_aabool(name, p) __param_check(name, p, int)
+
+static int param_set_aauint(const char *val, struct kernel_param *kp);
+static int param_get_aauint(char *buffer, struct kernel_param *kp);
+#define param_check_aauint(name, p) __param_check(name, p, int)
+
+static int param_set_aalockpolicy(const char *val, struct kernel_param *kp);
+static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp);
+#define param_check_aalockpolicy(name, p) __param_check(name, p, int)
+
+static int param_set_audit(const char *val, struct kernel_param *kp);
+static int param_get_audit(char *buffer, struct kernel_param *kp);
+#define param_check_audit(name, p) __param_check(name, p, int)
+
+static int param_set_mode(const char *val, struct kernel_param *kp);
+static int param_get_mode(char *buffer, struct kernel_param *kp);
+#define param_check_mode(name, p) __param_check(name, p, int)
+
+/* Flag values, also controllable via /sys/module/apparmor/parameters
+ * We define special types as we want to do additional mediation.
+ */
+
+/* AppArmor global enforcement switch - complain, enforce, kill */
+enum profile_mode aa_g_profile_mode = APPARMOR_ENFORCE;
+module_param_call(mode, param_set_mode, param_get_mode,
+		  &aa_g_profile_mode, S_IRUSR | S_IWUSR);
+
+/* Debug mode */
+int aa_g_debug;
+module_param_named(debug, aa_g_debug, aabool, S_IRUSR | S_IWUSR);
+
+/* Audit mode */
+enum audit_mode aa_g_audit;
+module_param_call(audit, param_set_audit, param_get_audit,
+		  &aa_g_audit, S_IRUSR | S_IWUSR);
+
+/* Determines if audit header is included in audited messages.  This
+ * provides more context if the audit daemon is not running
+ */
+int aa_g_audit_header = 1;
+module_param_named(audit_header, aa_g_audit_header, aabool,
+		   S_IRUSR | S_IWUSR);
+
+/* lock out loading/removal of policy
+ * TODO: add in at boot loading of policy, which is the only way to
+ *       load policy, if lock_policy is set
+ */
+int aa_g_lock_policy;
+module_param_named(lock_policy, aa_g_lock_policy, aalockpolicy,
+		   S_IRUSR | S_IWUSR);
+
+/* Syscall logging mode */
+int aa_g_logsyscall;
+module_param_named(logsyscall, aa_g_logsyscall, aabool, S_IRUSR | S_IWUSR);
+
+/* Maximum pathname length before accesses will start getting rejected */
+unsigned int aa_g_path_max = 2 * PATH_MAX;
+module_param_named(path_max, aa_g_path_max, aauint, S_IRUSR | S_IWUSR);
+
+/* Determines how paranoid loading of policy is and how much verification
+ * on the loaded policy is done.
+ */
+int aa_g_paranoid_load = 1;
+module_param_named(paranoid_load, aa_g_paranoid_load, aabool,
+		   S_IRUSR | S_IWUSR);
+
+/* Boot time disable flag */
+static unsigned int apparmor_enabled = CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE;
+module_param_named(enabled, apparmor_enabled, aabool, S_IRUSR);
+
+static int __init apparmor_enabled_setup(char *str)
+{
+	unsigned long enabled;
+	int error = strict_strtoul(str, 0, &enabled);
+	if (!error)
+		apparmor_enabled = enabled ? 1 : 0;
+	return 1;
+}
+
+__setup("apparmor=", apparmor_enabled_setup);
+
+/* set global flag turning off the ability to load policy */
+static int param_set_aalockpolicy(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	if (aa_g_lock_policy)
+		return -EACCES;
+	return param_set_bool(val, kp);
+}
+
+static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_bool(buffer, kp);
+}
+
+static int param_set_aabool(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_set_bool(val, kp);
+}
+
+static int param_get_aabool(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_bool(buffer, kp);
+}
+
+static int param_set_aauint(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_set_uint(val, kp);
+}
+
+static int param_get_aauint(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_uint(buffer, kp);
+}
+
+static int param_get_audit(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	return sprintf(buffer, "%s", audit_mode_names[aa_g_audit]);
+}
+
+static int param_set_audit(const char *val, struct kernel_param *kp)
+{
+	int i;
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	if (!val)
+		return -EINVAL;
+
+	for (i = 0; i < AUDIT_MAX_INDEX; i++) {
+		if (strcmp(val, audit_mode_names[i]) == 0) {
+			aa_g_audit = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int param_get_mode(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	return sprintf(buffer, "%s", profile_mode_names[aa_g_profile_mode]);
+}
+
+static int param_set_mode(const char *val, struct kernel_param *kp)
+{
+	int i;
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	if (!val)
+		return -EINVAL;
+
+	for (i = 0; i < APPARMOR_NAMES_MAX_INDEX; i++) {
+		if (strcmp(val, profile_mode_names[i]) == 0) {
+			aa_g_profile_mode = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * AppArmor init functions
+ */
+
+/**
+ * set_init_cxt - set a task context and profile on the first task.
+ *
+ * TODO: allow setting an alternate profile than unconfined
+ */
+static int __init set_init_cxt(void)
+{
+	struct cred *cred = (struct cred *)current->real_cred;
+	struct aa_task_cxt *cxt;
+
+	cxt = aa_alloc_task_context(GFP_KERNEL);
+	if (!cxt)
+		return -ENOMEM;
+
+	cxt->profile = aa_get_profile(root_ns->unconfined);
+	cred->security = cxt;
+
+	return 0;
+}
+
+static int __init apparmor_init(void)
+{
+	int error;
+
+	if (!apparmor_enabled || !security_module_enable(&apparmor_ops)) {
+		aa_info_message("AppArmor disabled by boot time parameter");
+		apparmor_enabled = 0;
+		return 0;
+	}
+
+	error = aa_alloc_root_ns();
+	if (error) {
+		AA_ERROR("Unable to allocate default profile namespace\n");
+		goto alloc_out;
+	}
+
+	error = set_init_cxt();
+	if (error) {
+		AA_ERROR("Failed to set context on init task\n");
+		goto register_security_out;
+	}
+
+	error = register_security(&apparmor_ops);
+	if (error) {
+		AA_ERROR("Unable to register AppArmor\n");
+		goto register_security_out;
+	}
+
+	/* Report that AppArmor successfully initialized */
+	apparmor_initialized = 1;
+	if (aa_g_profile_mode == APPARMOR_COMPLAIN)
+		aa_info_message("AppArmor initialized: complain mode enabled");
+	else if (aa_g_profile_mode == APPARMOR_KILL)
+		aa_info_message("AppArmor initialized: kill mode enabled");
+	else
+		aa_info_message("AppArmor initialized");
+
+	return error;
+
+register_security_out:
+	aa_free_root_ns();
+
+alloc_out:
+	aa_destroy_aafs();
+
+	apparmor_enabled = 0;
+	return error;
+
+}
+
+security_initcall(apparmor_init);
diff --git a/security/apparmor/match.c b/security/apparmor/match.c
new file mode 100644
index 00000000000..5cb4dc1f699
--- /dev/null
+++ b/security/apparmor/match.c
@@ -0,0 +1,353 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor dfa based regular expression matching engine
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/err.h>
+#include <linux/kref.h>
+
+#include "include/apparmor.h"
+#include "include/match.h"
+
+/**
+ * unpack_table - unpack a dfa table (one of accept, default, base, next check)
+ * @blob: data to unpack (NOT NULL)
+ * @bsize: size of blob
+ *
+ * Returns: pointer to table else NULL on failure
+ *
+ * NOTE: must be freed by kvfree (not kmalloc)
+ */
+static struct table_header *unpack_table(char *blob, size_t bsize)
+{
+	struct table_header *table = NULL;
+	struct table_header th;
+	size_t tsize;
+
+	if (bsize < sizeof(struct table_header))
+		goto out;
+
+	/* loaded td_id's start at 1, subtract 1 now to avoid doing
+	 * it every time we use td_id as an index
+	 */
+	th.td_id = be16_to_cpu(*(u16 *) (blob)) - 1;
+	th.td_flags = be16_to_cpu(*(u16 *) (blob + 2));
+	th.td_lolen = be32_to_cpu(*(u32 *) (blob + 8));
+	blob += sizeof(struct table_header);
+
+	if (!(th.td_flags == YYTD_DATA16 || th.td_flags == YYTD_DATA32 ||
+	      th.td_flags == YYTD_DATA8))
+		goto out;
+
+	tsize = table_size(th.td_lolen, th.td_flags);
+	if (bsize < tsize)
+		goto out;
+
+	table = kvmalloc(tsize);
+	if (table) {
+		*table = th;
+		if (th.td_flags == YYTD_DATA8)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u8, byte_to_byte);
+		else if (th.td_flags == YYTD_DATA16)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u16, be16_to_cpu);
+		else if (th.td_flags == YYTD_DATA32)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u32, be32_to_cpu);
+		else
+			goto fail;
+	}
+
+out:
+	/* if table was vmalloced make sure the page tables are synced
+	 * before it is used, as it goes live to all cpus.
+	 */
+	if (is_vmalloc_addr(table))
+		vm_unmap_aliases();
+	return table;
+fail:
+	kvfree(table);
+	return NULL;
+}
+
+/**
+ * verify_dfa - verify that transitions and states in the tables are in bounds.
+ * @dfa: dfa to test  (NOT NULL)
+ * @flags: flags controlling what type of accept table are acceptable
+ *
+ * Assumes dfa has gone through the first pass verification done by unpacking
+ * NOTE: this does not valid accept table values
+ *
+ * Returns: %0 else error code on failure to verify
+ */
+static int verify_dfa(struct aa_dfa *dfa, int flags)
+{
+	size_t i, state_count, trans_count;
+	int error = -EPROTO;
+
+	/* check that required tables exist */
+	if (!(dfa->tables[YYTD_ID_DEF] &&
+	      dfa->tables[YYTD_ID_BASE] &&
+	      dfa->tables[YYTD_ID_NXT] && dfa->tables[YYTD_ID_CHK]))
+		goto out;
+
+	/* accept.size == default.size == base.size */
+	state_count = dfa->tables[YYTD_ID_BASE]->td_lolen;
+	if (ACCEPT1_FLAGS(flags)) {
+		if (!dfa->tables[YYTD_ID_ACCEPT])
+			goto out;
+		if (state_count != dfa->tables[YYTD_ID_ACCEPT]->td_lolen)
+			goto out;
+	}
+	if (ACCEPT2_FLAGS(flags)) {
+		if (!dfa->tables[YYTD_ID_ACCEPT2])
+			goto out;
+		if (state_count != dfa->tables[YYTD_ID_ACCEPT2]->td_lolen)
+			goto out;
+	}
+	if (state_count != dfa->tables[YYTD_ID_DEF]->td_lolen)
+		goto out;
+
+	/* next.size == chk.size */
+	trans_count = dfa->tables[YYTD_ID_NXT]->td_lolen;
+	if (trans_count != dfa->tables[YYTD_ID_CHK]->td_lolen)
+		goto out;
+
+	/* if equivalence classes then its table size must be 256 */
+	if (dfa->tables[YYTD_ID_EC] &&
+	    dfa->tables[YYTD_ID_EC]->td_lolen != 256)
+		goto out;
+
+	if (flags & DFA_FLAG_VERIFY_STATES) {
+		for (i = 0; i < state_count; i++) {
+			if (DEFAULT_TABLE(dfa)[i] >= state_count)
+				goto out;
+			/* TODO: do check that DEF state recursion terminates */
+			if (BASE_TABLE(dfa)[i] + 255 >= trans_count) {
+				printk(KERN_ERR "AppArmor DFA next/check upper "
+				       "bounds error\n");
+				goto out;
+			}
+		}
+
+		for (i = 0; i < trans_count; i++) {
+			if (NEXT_TABLE(dfa)[i] >= state_count)
+				goto out;
+			if (CHECK_TABLE(dfa)[i] >= state_count)
+				goto out;
+		}
+	}
+
+	error = 0;
+out:
+	return error;
+}
+
+/**
+ * dfa_free - free a dfa allocated by aa_dfa_unpack
+ * @dfa: the dfa to free  (MAYBE NULL)
+ *
+ * Requires: reference count to dfa == 0
+ */
+static void dfa_free(struct aa_dfa *dfa)
+{
+	if (dfa) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(dfa->tables); i++) {
+			kvfree(dfa->tables[i]);
+			dfa->tables[i] = NULL;
+		}
+		kfree(dfa);
+	}
+}
+
+/**
+ * aa_dfa_free_kref - free aa_dfa by kref (called by aa_put_dfa)
+ * @kr: kref callback for freeing of a dfa  (NOT NULL)
+ */
+void aa_dfa_free_kref(struct kref *kref)
+{
+	struct aa_dfa *dfa = container_of(kref, struct aa_dfa, count);
+	dfa_free(dfa);
+}
+
+/**
+ * aa_dfa_unpack - unpack the binary tables of a serialized dfa
+ * @blob: aligned serialized stream of data to unpack  (NOT NULL)
+ * @size: size of data to unpack
+ * @flags: flags controlling what type of accept tables are acceptable
+ *
+ * Unpack a dfa that has been serialized.  To find information on the dfa
+ * format look in Documentation/apparmor.txt
+ * Assumes the dfa @blob stream has been aligned on a 8 byte boundry
+ *
+ * Returns: an unpacked dfa ready for matching or ERR_PTR on failure
+ */
+struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags)
+{
+	int hsize;
+	int error = -ENOMEM;
+	char *data = blob;
+	struct table_header *table = NULL;
+	struct aa_dfa *dfa = kzalloc(sizeof(struct aa_dfa), GFP_KERNEL);
+	if (!dfa)
+		goto fail;
+
+	kref_init(&dfa->count);
+
+	error = -EPROTO;
+
+	/* get dfa table set header */
+	if (size < sizeof(struct table_set_header))
+		goto fail;
+
+	if (ntohl(*(u32 *) data) != YYTH_MAGIC)
+		goto fail;
+
+	hsize = ntohl(*(u32 *) (data + 4));
+	if (size < hsize)
+		goto fail;
+
+	dfa->flags = ntohs(*(u16 *) (data + 12));
+	data += hsize;
+	size -= hsize;
+
+	while (size > 0) {
+		table = unpack_table(data, size);
+		if (!table)
+			goto fail;
+
+		switch (table->td_id) {
+		case YYTD_ID_ACCEPT:
+			if (!(table->td_flags & ACCEPT1_FLAGS(flags)))
+				goto fail;
+			break;
+		case YYTD_ID_ACCEPT2:
+			if (!(table->td_flags & ACCEPT2_FLAGS(flags)))
+				goto fail;
+			break;
+		case YYTD_ID_BASE:
+			if (table->td_flags != YYTD_DATA32)
+				goto fail;
+			break;
+		case YYTD_ID_DEF:
+		case YYTD_ID_NXT:
+		case YYTD_ID_CHK:
+			if (table->td_flags != YYTD_DATA16)
+				goto fail;
+			break;
+		case YYTD_ID_EC:
+			if (table->td_flags != YYTD_DATA8)
+				goto fail;
+			break;
+		default:
+			goto fail;
+		}
+		/* check for duplicate table entry */
+		if (dfa->tables[table->td_id])
+			goto fail;
+		dfa->tables[table->td_id] = table;
+		data += table_size(table->td_lolen, table->td_flags);
+		size -= table_size(table->td_lolen, table->td_flags);
+		table = NULL;
+	}
+
+	error = verify_dfa(dfa, flags);
+	if (error)
+		goto fail;
+
+	return dfa;
+
+fail:
+	kvfree(table);
+	dfa_free(dfa);
+	return ERR_PTR(error);
+}
+
+/**
+ * aa_dfa_match_len - traverse @dfa to find state @str stops at
+ * @dfa: the dfa to match @str against  (NOT NULL)
+ * @start: the state of the dfa to start matching in
+ * @str: the string of bytes to match against the dfa  (NOT NULL)
+ * @len: length of the string of bytes to match
+ *
+ * aa_dfa_match_len will match @str against the dfa and return the state it
+ * finished matching in. The final state can be used to look up the accepting
+ * label, or as the start state of a continuing match.
+ *
+ * This function will happily match again the 0 byte and only finishes
+ * when @len input is consumed.
+ *
+ * Returns: final state reached after input is consumed
+ */
+unsigned int aa_dfa_match_len(struct aa_dfa *dfa, unsigned int start,
+			      const char *str, int len)
+{
+	u16 *def = DEFAULT_TABLE(dfa);
+	u32 *base = BASE_TABLE(dfa);
+	u16 *next = NEXT_TABLE(dfa);
+	u16 *check = CHECK_TABLE(dfa);
+	unsigned int state = start, pos;
+
+	if (state == 0)
+		return 0;
+
+	/* current state is <state>, matching character *str */
+	if (dfa->tables[YYTD_ID_EC]) {
+		/* Equivalence class table defined */
+		u8 *equiv = EQUIV_TABLE(dfa);
+		/* default is direct to next state */
+		for (; len; len--) {
+			pos = base[state] + equiv[(u8) *str++];
+			if (check[pos] == state)
+				state = next[pos];
+			else
+				state = def[state];
+		}
+	} else {
+		/* default is direct to next state */
+		for (; len; len--) {
+			pos = base[state] + (u8) *str++;
+			if (check[pos] == state)
+				state = next[pos];
+			else
+				state = def[state];
+		}
+	}
+
+	return state;
+}
+
+/**
+ * aa_dfa_next_state - traverse @dfa to find state @str stops at
+ * @dfa: the dfa to match @str against  (NOT NULL)
+ * @start: the state of the dfa to start matching in
+ * @str: the null terminated string of bytes to match against the dfa (NOT NULL)
+ *
+ * aa_dfa_next_state will match @str against the dfa and return the state it
+ * finished matching in. The final state can be used to look up the accepting
+ * label, or as the start state of a continuing match.
+ *
+ * Returns: final state reached after input is consumed
+ */
+unsigned int aa_dfa_match(struct aa_dfa *dfa, unsigned int start,
+			  const char *str)
+{
+	return aa_dfa_match_len(dfa, start, str, strlen(str));
+}
diff --git a/security/apparmor/path.c b/security/apparmor/path.c
new file mode 100644
index 00000000000..96bab9469d4
--- /dev/null
+++ b/security/apparmor/path.c
@@ -0,0 +1,235 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor function for pathnames
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/magic.h>
+#include <linux/mnt_namespace.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/nsproxy.h>
+#include <linux/path.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/fs_struct.h>
+
+#include "include/apparmor.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+
+/* modified from dcache.c */
+static int prepend(char **buffer, int buflen, const char *str, int namelen)
+{
+	buflen -= namelen;
+	if (buflen < 0)
+		return -ENAMETOOLONG;
+	*buffer -= namelen;
+	memcpy(*buffer, str, namelen);
+	return 0;
+}
+
+#define CHROOT_NSCONNECT (PATH_CHROOT_REL | PATH_CHROOT_NSCONNECT)
+
+/**
+ * d_namespace_path - lookup a name associated with a given path
+ * @path: path to lookup  (NOT NULL)
+ * @buf:  buffer to store path to  (NOT NULL)
+ * @buflen: length of @buf
+ * @name: Returns - pointer for start of path name with in @buf (NOT NULL)
+ * @flags: flags controlling path lookup
+ *
+ * Handle path name lookup.
+ *
+ * Returns: %0 else error code if path lookup fails
+ *          When no error the path name is returned in @name which points to
+ *          to a position in @buf
+ */
+static int d_namespace_path(struct path *path, char *buf, int buflen,
+			    char **name, int flags)
+{
+	struct path root, tmp;
+	char *res;
+	int deleted, connected;
+	int error = 0;
+
+	/* Get the root we want to resolve too */
+	if (flags & PATH_CHROOT_REL) {
+		/* resolve paths relative to chroot */
+		read_lock(&current->fs->lock);
+		root = current->fs->root;
+		/* released below */
+		path_get(&root);
+		read_unlock(&current->fs->lock);
+	} else {
+		/* resolve paths relative to namespace */
+		root.mnt = current->nsproxy->mnt_ns->root;
+		root.dentry = root.mnt->mnt_root;
+		/* released below */
+		path_get(&root);
+	}
+
+	spin_lock(&dcache_lock);
+	/* There is a race window between path lookup here and the
+	 * need to strip the " (deleted) string that __d_path applies
+	 * Detect the race and relookup the path
+	 *
+	 * The stripping of (deleted) is a hack that could be removed
+	 * with an updated __d_path
+	 */
+	do {
+		tmp = root;
+		deleted = d_unlinked(path->dentry);
+		res = __d_path(path, &tmp, buf, buflen);
+
+	} while (deleted != d_unlinked(path->dentry));
+	spin_unlock(&dcache_lock);
+
+	*name = res;
+	/* handle error conditions - and still allow a partial path to
+	 * be returned.
+	 */
+	if (IS_ERR(res)) {
+		error = PTR_ERR(res);
+		*name = buf;
+		goto out;
+	}
+	if (deleted) {
+		/* On some filesystems, newly allocated dentries appear to the
+		 * security_path hooks as a deleted dentry except without an
+		 * inode allocated.
+		 *
+		 * Remove the appended deleted text and return as string for
+		 * normal mediation, or auditing.  The (deleted) string is
+		 * guaranteed to be added in this case, so just strip it.
+		 */
+		buf[buflen - 11] = 0;	/* - (len(" (deleted)") +\0) */
+
+		if (path->dentry->d_inode && !(flags & PATH_MEDIATE_DELETED)) {
+			error = -ENOENT;
+			goto out;
+		}
+	}
+
+	/* Determine if the path is connected to the expected root */
+	connected = tmp.dentry == root.dentry && tmp.mnt == root.mnt;
+
+	/* If the path is not connected,
+	 * check if it is a sysctl and handle specially else remove any
+	 * leading / that __d_path may have returned.
+	 * Unless
+	 *     specifically directed to connect the path,
+	 * OR
+	 *     if in a chroot and doing chroot relative paths and the path
+	 *     resolves to the namespace root (would be connected outside
+	 *     of chroot) and specifically directed to connect paths to
+	 *     namespace root.
+	 */
+	if (!connected) {
+		/* is the disconnect path a sysctl? */
+		if (tmp.dentry->d_sb->s_magic == PROC_SUPER_MAGIC &&
+		    strncmp(*name, "/sys/", 5) == 0) {
+			/* TODO: convert over to using a per namespace
+			 * control instead of hard coded /proc
+			 */
+			error = prepend(name, *name - buf, "/proc", 5);
+		} else if (!(flags & PATH_CONNECT_PATH) &&
+			   !(((flags & CHROOT_NSCONNECT) == CHROOT_NSCONNECT) &&
+			     (tmp.mnt == current->nsproxy->mnt_ns->root &&
+			      tmp.dentry == tmp.mnt->mnt_root))) {
+			/* disconnected path, don't return pathname starting
+			 * with '/'
+			 */
+			error = -ESTALE;
+			if (*res == '/')
+				*name = res + 1;
+		}
+	}
+
+out:
+	path_put(&root);
+
+	return error;
+}
+
+/**
+ * get_name_to_buffer - get the pathname to a buffer ensure dir / is appended
+ * @path: path to get name for  (NOT NULL)
+ * @flags: flags controlling path lookup
+ * @buffer: buffer to put name in  (NOT NULL)
+ * @size: size of buffer
+ * @name: Returns - contains position of path name in @buffer (NOT NULL)
+ *
+ * Returns: %0 else error on failure
+ */
+static int get_name_to_buffer(struct path *path, int flags, char *buffer,
+			      int size, char **name)
+{
+	int adjust = (flags & PATH_IS_DIR) ? 1 : 0;
+	int error = d_namespace_path(path, buffer, size - adjust, name, flags);
+
+	if (!error && (flags & PATH_IS_DIR) && (*name)[1] != '\0')
+		/*
+		 * Append "/" to the pathname.  The root directory is a special
+		 * case; it already ends in slash.
+		 */
+		strcpy(&buffer[size - 2], "/");
+
+	return error;
+}
+
+/**
+ * aa_get_name - compute the pathname of a file
+ * @path: path the file  (NOT NULL)
+ * @flags: flags controlling path name generation
+ * @buffer: buffer that aa_get_name() allocated  (NOT NULL)
+ * @name: Returns - the generated path name if !error (NOT NULL)
+ *
+ * @name is a pointer to the beginning of the pathname (which usually differs
+ * from the beginning of the buffer), or NULL.  If there is an error @name
+ * may contain a partial or invalid name that can be used for audit purposes,
+ * but it can not be used for mediation.
+ *
+ * We need PATH_IS_DIR to indicate whether the file is a directory or not
+ * because the file may not yet exist, and so we cannot check the inode's
+ * file type.
+ *
+ * Returns: %0 else error code if could retrieve name
+ */
+int aa_get_name(struct path *path, int flags, char **buffer, const char **name)
+{
+	char *buf, *str = NULL;
+	int size = 256;
+	int error;
+
+	*name = NULL;
+	*buffer = NULL;
+	for (;;) {
+		/* freed by caller */
+		buf = kmalloc(size, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+
+		error = get_name_to_buffer(path, flags, buf, size, &str);
+		if (error != -ENAMETOOLONG)
+			break;
+
+		kfree(buf);
+		size <<= 1;
+		if (size > aa_g_path_max)
+			return -ENAMETOOLONG;
+	}
+	*buffer = buf;
+	*name = str;
+
+	return error;
+}
diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
new file mode 100644
index 00000000000..3cdc1ad0787
--- /dev/null
+++ b/security/apparmor/policy.c
@@ -0,0 +1,1184 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy manipulation functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor policy is based around profiles, which contain the rules a
+ * task is confined by.  Every task in the system has a profile attached
+ * to it determined either by matching "unconfined" tasks against the
+ * visible set of profiles or by following a profiles attachment rules.
+ *
+ * Each profile exists in a profile namespace which is a container of
+ * visible profiles.  Each namespace contains a special "unconfined" profile,
+ * which doesn't enforce any confinement on a task beyond DAC.
+ *
+ * Namespace and profile names can be written together in either
+ * of two syntaxes.
+ *	:namespace:profile - used by kernel interfaces for easy detection
+ *	namespace://profile - used by policy
+ *
+ * Profile names can not start with : or @ or ^ and may not contain \0
+ *
+ * Reserved profile names
+ *	unconfined - special automatically generated unconfined profile
+ *	inherit - special name to indicate profile inheritance
+ *	null-XXXX-YYYY - special automatically generated learning profiles
+ *
+ * Namespace names may not start with / or @ and may not contain \0 or :
+ * Reserved namespace names
+ *	user-XXXX - user defined profiles
+ *
+ * a // in a profile or namespace name indicates a hierarchical name with the
+ * name before the // being the parent and the name after the child.
+ *
+ * Profile and namespace hierarchies serve two different but similar purposes.
+ * The namespace contains the set of visible profiles that are considered
+ * for attachment.  The hierarchy of namespaces allows for virtualizing
+ * the namespace so that for example a chroot can have its own set of profiles
+ * which may define some local user namespaces.
+ * The profile hierarchy severs two distinct purposes,
+ * -  it allows for sub profiles or hats, which allows an application to run
+ *    subprograms under its own profile with different restriction than it
+ *    self, and not have it use the system profile.
+ *    eg. if a mail program starts an editor, the policy might make the
+ *        restrictions tighter on the editor tighter than the mail program,
+ *        and definitely different than general editor restrictions
+ * - it allows for binary hierarchy of profiles, so that execution history
+ *   is preserved.  This feature isn't exploited by AppArmor reference policy
+ *   but is allowed.  NOTE: this is currently suboptimal because profile
+ *   aliasing is not currently implemented so that a profile for each
+ *   level must be defined.
+ *   eg. /bin/bash///bin/ls as a name would indicate /bin/ls was started
+ *       from /bin/bash
+ *
+ *   A profile or namespace name that can contain one or more // separators
+ *   is referred to as an hname (hierarchical).
+ *   eg.  /bin/bash//bin/ls
+ *
+ *   An fqname is a name that may contain both namespace and profile hnames.
+ *   eg. :ns:/bin/bash//bin/ls
+ *
+ * NOTES:
+ *   - locking of profile lists is currently fairly coarse.  All profile
+ *     lists within a namespace use the namespace lock.
+ * FIXME: move profile lists to using rcu_lists
+ */
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include "include/apparmor.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+#include "include/policy_unpack.h"
+#include "include/resource.h"
+#include "include/sid.h"
+
+
+/* root profile namespace */
+struct aa_namespace *root_ns;
+
+const char *profile_mode_names[] = {
+	"enforce",
+	"complain",
+	"kill",
+};
+
+/**
+ * hname_tail - find the last component of an hname
+ * @name: hname to find the base profile name component of  (NOT NULL)
+ *
+ * Returns: the tail (base profile name) name component of an hname
+ */
+static const char *hname_tail(const char *hname)
+{
+	char *split;
+	hname = strim((char *)hname);
+	for (split = strstr(hname, "//"); split; split = strstr(hname, "//"))
+		hname = split + 2;
+
+	return hname;
+}
+
+/**
+ * policy_init - initialize a policy structure
+ * @policy: policy to initialize  (NOT NULL)
+ * @prefix: prefix name if any is required.  (MAYBE NULL)
+ * @name: name of the policy, init will make a copy of it  (NOT NULL)
+ *
+ * Note: this fn creates a copy of strings passed in
+ *
+ * Returns: true if policy init successful
+ */
+static bool policy_init(struct aa_policy *policy, const char *prefix,
+			const char *name)
+{
+	/* freed by policy_free */
+	if (prefix) {
+		policy->hname = kmalloc(strlen(prefix) + strlen(name) + 3,
+					GFP_KERNEL);
+		if (policy->hname)
+			sprintf(policy->hname, "%s//%s", prefix, name);
+	} else
+		policy->hname = kstrdup(name, GFP_KERNEL);
+	if (!policy->hname)
+		return 0;
+	/* base.name is a substring of fqname */
+	policy->name = (char *)hname_tail(policy->hname);
+	INIT_LIST_HEAD(&policy->list);
+	INIT_LIST_HEAD(&policy->profiles);
+	kref_init(&policy->count);
+
+	return 1;
+}
+
+/**
+ * policy_destroy - free the elements referenced by @policy
+ * @policy: policy that is to have its elements freed  (NOT NULL)
+ */
+static void policy_destroy(struct aa_policy *policy)
+{
+	/* still contains profiles -- invalid */
+	if (!list_empty(&policy->profiles)) {
+		AA_ERROR("%s: internal error, "
+			 "policy '%s' still contains profiles\n",
+			 __func__, policy->name);
+		BUG();
+	}
+	if (!list_empty(&policy->list)) {
+		AA_ERROR("%s: internal error, policy '%s' still on list\n",
+			 __func__, policy->name);
+		BUG();
+	}
+
+	/* don't free name as its a subset of hname */
+	kzfree(policy->hname);
+}
+
+/**
+ * __policy_find - find a policy by @name on a policy list
+ * @head: list to search  (NOT NULL)
+ * @name: name to search for  (NOT NULL)
+ *
+ * Requires: correct locks for the @head list be held
+ *
+ * Returns: unrefcounted policy that match @name or NULL if not found
+ */
+static struct aa_policy *__policy_find(struct list_head *head, const char *name)
+{
+	struct aa_policy *policy;
+
+	list_for_each_entry(policy, head, list) {
+		if (!strcmp(policy->name, name))
+			return policy;
+	}
+	return NULL;
+}
+
+/**
+ * __policy_strn_find - find a policy that's name matches @len chars of @str
+ * @head: list to search  (NOT NULL)
+ * @str: string to search for  (NOT NULL)
+ * @len: length of match required
+ *
+ * Requires: correct locks for the @head list be held
+ *
+ * Returns: unrefcounted policy that match @str or NULL if not found
+ *
+ * if @len == strlen(@strlen) then this is equiv to __policy_find
+ * other wise it allows searching for policy by a partial match of name
+ */
+static struct aa_policy *__policy_strn_find(struct list_head *head,
+					    const char *str, int len)
+{
+	struct aa_policy *policy;
+
+	list_for_each_entry(policy, head, list) {
+		if (aa_strneq(policy->name, str, len))
+			return policy;
+	}
+
+	return NULL;
+}
+
+/*
+ * Routines for AppArmor namespaces
+ */
+
+static const char *hidden_ns_name = "---";
+/**
+ * aa_ns_visible - test if @view is visible from @curr
+ * @curr: namespace to treat as the parent (NOT NULL)
+ * @view:  namespace to test if visible from @curr (NOT NULL)
+ *
+ * Returns: true if @view is visible from @curr else false
+ */
+bool aa_ns_visible(struct aa_namespace *curr, struct aa_namespace *view)
+{
+	if (curr == view)
+		return true;
+
+	for ( ; view; view = view->parent) {
+		if (view->parent == curr)
+			return true;
+	}
+	return false;
+}
+
+/**
+ * aa_na_name - Find the ns name to display for @view from @curr
+ * @curr - current namespace (NOT NULL)
+ * @view - namespace attempting to view (NOT NULL)
+ *
+ * Returns: name of @view visible from @curr
+ */
+const char *aa_ns_name(struct aa_namespace *curr, struct aa_namespace *view)
+{
+	/* if view == curr then the namespace name isn't displayed */
+	if (curr == view)
+		return "";
+
+	if (aa_ns_visible(curr, view)) {
+		/* at this point if a ns is visible it is in a view ns
+		 * thus the curr ns.hname is a prefix of its name.
+		 * Only output the virtualized portion of the name
+		 * Add + 2 to skip over // separating curr hname prefix
+		 * from the visible tail of the views hname
+		 */
+		return view->base.hname + strlen(curr->base.hname) + 2;
+	} else
+		return hidden_ns_name;
+}
+
+/**
+ * alloc_namespace - allocate, initialize and return a new namespace
+ * @prefix: parent namespace name (MAYBE NULL)
+ * @name: a preallocated name  (NOT NULL)
+ *
+ * Returns: refcounted namespace or NULL on failure.
+ */
+static struct aa_namespace *alloc_namespace(const char *prefix,
+					    const char *name)
+{
+	struct aa_namespace *ns;
+
+	ns = kzalloc(sizeof(*ns), GFP_KERNEL);
+	AA_DEBUG("%s(%p)\n", __func__, ns);
+	if (!ns)
+		return NULL;
+	if (!policy_init(&ns->base, prefix, name))
+		goto fail_ns;
+
+	INIT_LIST_HEAD(&ns->sub_ns);
+	rwlock_init(&ns->lock);
+
+	/* released by free_namespace */
+	ns->unconfined = aa_alloc_profile("unconfined");
+	if (!ns->unconfined)
+		goto fail_unconfined;
+
+	ns->unconfined->sid = aa_alloc_sid();
+	ns->unconfined->flags = PFLAG_UNCONFINED | PFLAG_IX_ON_NAME_ERROR |
+	    PFLAG_IMMUTABLE;
+
+	/*
+	 * released by free_namespace, however __remove_namespace breaks
+	 * the cyclic references (ns->unconfined, and unconfined->ns) and
+	 * replaces with refs to parent namespace unconfined
+	 */
+	ns->unconfined->ns = aa_get_namespace(ns);
+
+	return ns;
+
+fail_unconfined:
+	kzfree(ns->base.name);
+fail_ns:
+	kzfree(ns);
+	return NULL;
+}
+
+/**
+ * free_namespace - free a profile namespace
+ * @ns: the namespace to free  (MAYBE NULL)
+ *
+ * Requires: All references to the namespace must have been put, if the
+ *           namespace was referenced by a profile confining a task,
+ */
+static void free_namespace(struct aa_namespace *ns)
+{
+	if (!ns)
+		return;
+
+	policy_destroy(&ns->base);
+	aa_put_namespace(ns->parent);
+
+	if (ns->unconfined && ns->unconfined->ns == ns)
+		ns->unconfined->ns = NULL;
+
+	aa_put_profile(ns->unconfined);
+	kzfree(ns);
+}
+
+/**
+ * aa_free_namespace_kref - free aa_namespace by kref (see aa_put_namespace)
+ * @kr: kref callback for freeing of a namespace  (NOT NULL)
+ */
+void aa_free_namespace_kref(struct kref *kref)
+{
+	free_namespace(container_of(kref, struct aa_namespace, base.count));
+}
+
+/**
+ * __aa_find_namespace - find a namespace on a list by @name
+ * @head: list to search for namespace on  (NOT NULL)
+ * @name: name of namespace to look for  (NOT NULL)
+ *
+ * Returns: unrefcounted namespace
+ *
+ * Requires: ns lock be held
+ */
+static struct aa_namespace *__aa_find_namespace(struct list_head *head,
+						const char *name)
+{
+	return (struct aa_namespace *)__policy_find(head, name);
+}
+
+/**
+ * aa_find_namespace  -  look up a profile namespace on the namespace list
+ * @root: namespace to search in  (NOT NULL)
+ * @name: name of namespace to find  (NOT NULL)
+ *
+ * Returns: a refcounted namespace on the list, or NULL if no namespace
+ *          called @name exists.
+ *
+ * refcount released by caller
+ */
+struct aa_namespace *aa_find_namespace(struct aa_namespace *root,
+				       const char *name)
+{
+	struct aa_namespace *ns = NULL;
+
+	read_lock(&root->lock);
+	ns = aa_get_namespace(__aa_find_namespace(&root->sub_ns, name));
+	read_unlock(&root->lock);
+
+	return ns;
+}
+
+/**
+ * aa_prepare_namespace - find an existing or create a new namespace of @name
+ * @name: the namespace to find or add  (MAYBE NULL)
+ *
+ * Returns: refcounted namespace or NULL if failed to create one
+ */
+static struct aa_namespace *aa_prepare_namespace(const char *name)
+{
+	struct aa_namespace *ns, *root;
+
+	root = aa_current_profile()->ns;
+
+	write_lock(&root->lock);
+
+	/* if name isn't specified the profile is loaded to the current ns */
+	if (!name) {
+		/* released by caller */
+		ns = aa_get_namespace(root);
+		goto out;
+	}
+
+	/* try and find the specified ns and if it doesn't exist create it */
+	/* released by caller */
+	ns = aa_get_namespace(__aa_find_namespace(&root->sub_ns, name));
+	if (!ns) {
+		/* namespace not found */
+		struct aa_namespace *new_ns;
+		write_unlock(&root->lock);
+		new_ns = alloc_namespace(root->base.hname, name);
+		if (!new_ns)
+			return NULL;
+		write_lock(&root->lock);
+		/* test for race when new_ns was allocated */
+		ns = __aa_find_namespace(&root->sub_ns, name);
+		if (!ns) {
+			/* add parent ref */
+			new_ns->parent = aa_get_namespace(root);
+
+			list_add(&new_ns->base.list, &root->sub_ns);
+			/* add list ref */
+			ns = aa_get_namespace(new_ns);
+		} else {
+			/* raced so free the new one */
+			free_namespace(new_ns);
+			/* get reference on namespace */
+			aa_get_namespace(ns);
+		}
+	}
+out:
+	write_unlock(&root->lock);
+
+	/* return ref */
+	return ns;
+}
+
+/**
+ * __list_add_profile - add a profile to a list
+ * @list: list to add it to  (NOT NULL)
+ * @profile: the profile to add  (NOT NULL)
+ *
+ * refcount @profile, should be put by __list_remove_profile
+ *
+ * Requires: namespace lock be held, or list not be shared
+ */
+static void __list_add_profile(struct list_head *list,
+			       struct aa_profile *profile)
+{
+	list_add(&profile->base.list, list);
+	/* get list reference */
+	aa_get_profile(profile);
+}
+
+/**
+ * __list_remove_profile - remove a profile from the list it is on
+ * @profile: the profile to remove  (NOT NULL)
+ *
+ * remove a profile from the list, warning generally removal should
+ * be done with __replace_profile as most profile removals are
+ * replacements to the unconfined profile.
+ *
+ * put @profile list refcount
+ *
+ * Requires: namespace lock be held, or list not have been live
+ */
+static void __list_remove_profile(struct aa_profile *profile)
+{
+	list_del_init(&profile->base.list);
+	if (!(profile->flags & PFLAG_NO_LIST_REF))
+		/* release list reference */
+		aa_put_profile(profile);
+}
+
+/**
+ * __replace_profile - replace @old with @new on a list
+ * @old: profile to be replaced  (NOT NULL)
+ * @new: profile to replace @old with  (NOT NULL)
+ *
+ * Will duplicate and refcount elements that @new inherits from @old
+ * and will inherit @old children.
+ *
+ * refcount @new for list, put @old list refcount
+ *
+ * Requires: namespace list lock be held, or list not be shared
+ */
+static void __replace_profile(struct aa_profile *old, struct aa_profile *new)
+{
+	struct aa_policy *policy;
+	struct aa_profile *child, *tmp;
+
+	if (old->parent)
+		policy = &old->parent->base;
+	else
+		policy = &old->ns->base;
+
+	/* released when @new is freed */
+	new->parent = aa_get_profile(old->parent);
+	new->ns = aa_get_namespace(old->ns);
+	new->sid = old->sid;
+	__list_add_profile(&policy->profiles, new);
+	/* inherit children */
+	list_for_each_entry_safe(child, tmp, &old->base.profiles, base.list) {
+		aa_put_profile(child->parent);
+		child->parent = aa_get_profile(new);
+		/* list refcount transferred to @new*/
+		list_move(&child->base.list, &new->base.profiles);
+	}
+
+	/* released by free_profile */
+	old->replacedby = aa_get_profile(new);
+	__list_remove_profile(old);
+}
+
+static void __profile_list_release(struct list_head *head);
+
+/**
+ * __remove_profile - remove old profile, and children
+ * @profile: profile to be replaced  (NOT NULL)
+ *
+ * Requires: namespace list lock be held, or list not be shared
+ */
+static void __remove_profile(struct aa_profile *profile)
+{
+	/* release any children lists first */
+	__profile_list_release(&profile->base.profiles);
+	/* released by free_profile */
+	profile->replacedby = aa_get_profile(profile->ns->unconfined);
+	__list_remove_profile(profile);
+}
+
+/**
+ * __profile_list_release - remove all profiles on the list and put refs
+ * @head: list of profiles  (NOT NULL)
+ *
+ * Requires: namespace lock be held
+ */
+static void __profile_list_release(struct list_head *head)
+{
+	struct aa_profile *profile, *tmp;
+	list_for_each_entry_safe(profile, tmp, head, base.list)
+		__remove_profile(profile);
+}
+
+static void __ns_list_release(struct list_head *head);
+
+/**
+ * destroy_namespace - remove everything contained by @ns
+ * @ns: namespace to have it contents removed  (NOT NULL)
+ */
+static void destroy_namespace(struct aa_namespace *ns)
+{
+	if (!ns)
+		return;
+
+	write_lock(&ns->lock);
+	/* release all profiles in this namespace */
+	__profile_list_release(&ns->base.profiles);
+
+	/* release all sub namespaces */
+	__ns_list_release(&ns->sub_ns);
+
+	write_unlock(&ns->lock);
+}
+
+/**
+ * __remove_namespace - remove a namespace and all its children
+ * @ns: namespace to be removed  (NOT NULL)
+ *
+ * Requires: ns->parent->lock be held and ns removed from parent.
+ */
+static void __remove_namespace(struct aa_namespace *ns)
+{
+	struct aa_profile *unconfined = ns->unconfined;
+
+	/* remove ns from namespace list */
+	list_del_init(&ns->base.list);
+
+	/*
+	 * break the ns, unconfined profile cyclic reference and forward
+	 * all new unconfined profiles requests to the parent namespace
+	 * This will result in all confined tasks that have a profile
+	 * being removed, inheriting the parent->unconfined profile.
+	 */
+	if (ns->parent)
+		ns->unconfined = aa_get_profile(ns->parent->unconfined);
+
+	destroy_namespace(ns);
+
+	/* release original ns->unconfined ref */
+	aa_put_profile(unconfined);
+	/* release ns->base.list ref, from removal above */
+	aa_put_namespace(ns);
+}
+
+/**
+ * __ns_list_release - remove all profile namespaces on the list put refs
+ * @head: list of profile namespaces  (NOT NULL)
+ *
+ * Requires: namespace lock be held
+ */
+static void __ns_list_release(struct list_head *head)
+{
+	struct aa_namespace *ns, *tmp;
+	list_for_each_entry_safe(ns, tmp, head, base.list)
+		__remove_namespace(ns);
+
+}
+
+/**
+ * aa_alloc_root_ns - allocate the root profile namespace
+ *
+ * Returns: %0 on success else error
+ *
+ */
+int __init aa_alloc_root_ns(void)
+{
+	/* released by aa_free_root_ns - used as list ref*/
+	root_ns = alloc_namespace(NULL, "root");
+	if (!root_ns)
+		return -ENOMEM;
+
+	return 0;
+}
+
+ /**
+  * aa_free_root_ns - free the root profile namespace
+  */
+void __init aa_free_root_ns(void)
+ {
+	 struct aa_namespace *ns = root_ns;
+	 root_ns = NULL;
+
+	 destroy_namespace(ns);
+	 aa_put_namespace(ns);
+}
+
+/**
+ * aa_alloc_profile - allocate, initialize and return a new profile
+ * @hname: name of the profile  (NOT NULL)
+ *
+ * Returns: refcount profile or NULL on failure
+ */
+struct aa_profile *aa_alloc_profile(const char *hname)
+{
+	struct aa_profile *profile;
+
+	/* freed by free_profile - usually through aa_put_profile */
+	profile = kzalloc(sizeof(*profile), GFP_KERNEL);
+	if (!profile)
+		return NULL;
+
+	if (!policy_init(&profile->base, NULL, hname)) {
+		kzfree(profile);
+		return NULL;
+	}
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * aa_new_null_profile - create a new null-X learning profile
+ * @parent: profile that caused this profile to be created (NOT NULL)
+ * @hat: true if the null- learning profile is a hat
+ *
+ * Create a null- complain mode profile used in learning mode.  The name of
+ * the profile is unique and follows the format of parent//null-sid.
+ *
+ * null profiles are added to the profile list but the list does not
+ * hold a count on them so that they are automatically released when
+ * not in use.
+ *
+ * Returns: new refcounted profile else NULL on failure
+ */
+struct aa_profile *aa_new_null_profile(struct aa_profile *parent, int hat)
+{
+	struct aa_profile *profile = NULL;
+	char *name;
+	u32 sid = aa_alloc_sid();
+
+	/* freed below */
+	name = kmalloc(strlen(parent->base.hname) + 2 + 7 + 8, GFP_KERNEL);
+	if (!name)
+		goto fail;
+	sprintf(name, "%s//null-%x", parent->base.hname, sid);
+
+	profile = aa_alloc_profile(name);
+	kfree(name);
+	if (!profile)
+		goto fail;
+
+	profile->sid = sid;
+	profile->mode = APPARMOR_COMPLAIN;
+	profile->flags = PFLAG_NULL;
+	if (hat)
+		profile->flags |= PFLAG_HAT;
+
+	/* released on free_profile */
+	profile->parent = aa_get_profile(parent);
+	profile->ns = aa_get_namespace(parent->ns);
+
+	write_lock(&profile->ns->lock);
+	__list_add_profile(&parent->base.profiles, profile);
+	write_unlock(&profile->ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+
+fail:
+	aa_free_sid(sid);
+	return NULL;
+}
+
+/**
+ * free_profile - free a profile
+ * @profile: the profile to free  (MAYBE NULL)
+ *
+ * Free a profile, its hats and null_profile. All references to the profile,
+ * its hats and null_profile must have been put.
+ *
+ * If the profile was referenced from a task context, free_profile() will
+ * be called from an rcu callback routine, so we must not sleep here.
+ */
+static void free_profile(struct aa_profile *profile)
+{
+	AA_DEBUG("%s(%p)\n", __func__, profile);
+
+	if (!profile)
+		return;
+
+	if (!list_empty(&profile->base.list)) {
+		AA_ERROR("%s: internal error, "
+			 "profile '%s' still on ns list\n",
+			 __func__, profile->base.name);
+		BUG();
+	}
+
+	/* free children profiles */
+	policy_destroy(&profile->base);
+	aa_put_profile(profile->parent);
+
+	aa_put_namespace(profile->ns);
+	kzfree(profile->rename);
+
+	aa_free_file_rules(&profile->file);
+	aa_free_cap_rules(&profile->caps);
+	aa_free_rlimit_rules(&profile->rlimits);
+
+	aa_free_sid(profile->sid);
+	aa_put_dfa(profile->xmatch);
+
+	aa_put_profile(profile->replacedby);
+
+	kzfree(profile);
+}
+
+/**
+ * aa_free_profile_kref - free aa_profile by kref (called by aa_put_profile)
+ * @kr: kref callback for freeing of a profile  (NOT NULL)
+ */
+void aa_free_profile_kref(struct kref *kref)
+{
+	struct aa_profile *p = container_of(kref, struct aa_profile,
+					    base.count);
+
+	free_profile(p);
+}
+
+/* TODO: profile accounting - setup in remove */
+
+/**
+ * __find_child - find a profile on @head list with a name matching @name
+ * @head: list to search  (NOT NULL)
+ * @name: name of profile (NOT NULL)
+ *
+ * Requires: ns lock protecting list be held
+ *
+ * Returns: unrefcounted profile ptr, or NULL if not found
+ */
+static struct aa_profile *__find_child(struct list_head *head, const char *name)
+{
+	return (struct aa_profile *)__policy_find(head, name);
+}
+
+/**
+ * __strn_find_child - find a profile on @head list using substring of @name
+ * @head: list to search  (NOT NULL)
+ * @name: name of profile (NOT NULL)
+ * @len: length of @name substring to match
+ *
+ * Requires: ns lock protecting list be held
+ *
+ * Returns: unrefcounted profile ptr, or NULL if not found
+ */
+static struct aa_profile *__strn_find_child(struct list_head *head,
+					    const char *name, int len)
+{
+	return (struct aa_profile *)__policy_strn_find(head, name, len);
+}
+
+/**
+ * aa_find_child - find a profile by @name in @parent
+ * @parent: profile to search  (NOT NULL)
+ * @name: profile name to search for  (NOT NULL)
+ *
+ * Returns: a refcounted profile or NULL if not found
+ */
+struct aa_profile *aa_find_child(struct aa_profile *parent, const char *name)
+{
+	struct aa_profile *profile;
+
+	read_lock(&parent->ns->lock);
+	profile = aa_get_profile(__find_child(&parent->base.profiles, name));
+	read_unlock(&parent->ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * __lookup_parent - lookup the parent of a profile of name @hname
+ * @ns: namespace to lookup profile in  (NOT NULL)
+ * @hname: hierarchical profile name to find parent of  (NOT NULL)
+ *
+ * Lookups up the parent of a fully qualified profile name, the profile
+ * that matches hname does not need to exist, in general this
+ * is used to load a new profile.
+ *
+ * Requires: ns->lock be held
+ *
+ * Returns: unrefcounted policy or NULL if not found
+ */
+static struct aa_policy *__lookup_parent(struct aa_namespace *ns,
+					 const char *hname)
+{
+	struct aa_policy *policy;
+	struct aa_profile *profile = NULL;
+	char *split;
+
+	policy = &ns->base;
+
+	for (split = strstr(hname, "//"); split;) {
+		profile = __strn_find_child(&policy->profiles, hname,
+					    split - hname);
+		if (!profile)
+			return NULL;
+		policy = &profile->base;
+		hname = split + 2;
+		split = strstr(hname, "//");
+	}
+	if (!profile)
+		return &ns->base;
+	return &profile->base;
+}
+
+/**
+ * __lookup_profile - lookup the profile matching @hname
+ * @base: base list to start looking up profile name from  (NOT NULL)
+ * @hname: hierarchical profile name  (NOT NULL)
+ *
+ * Requires: ns->lock be held
+ *
+ * Returns: unrefcounted profile pointer or NULL if not found
+ *
+ * Do a relative name lookup, recursing through profile tree.
+ */
+static struct aa_profile *__lookup_profile(struct aa_policy *base,
+					   const char *hname)
+{
+	struct aa_profile *profile = NULL;
+	char *split;
+
+	for (split = strstr(hname, "//"); split;) {
+		profile = __strn_find_child(&base->profiles, hname,
+					    split - hname);
+		if (!profile)
+			return NULL;
+
+		base = &profile->base;
+		hname = split + 2;
+		split = strstr(hname, "//");
+	}
+
+	profile = __find_child(&base->profiles, hname);
+
+	return profile;
+}
+
+/**
+ * aa_lookup_profile - find a profile by its full or partial name
+ * @ns: the namespace to start from (NOT NULL)
+ * @hname: name to do lookup on.  Does not contain namespace prefix (NOT NULL)
+ *
+ * Returns: refcounted profile or NULL if not found
+ */
+struct aa_profile *aa_lookup_profile(struct aa_namespace *ns, const char *hname)
+{
+	struct aa_profile *profile;
+
+	read_lock(&ns->lock);
+	profile = aa_get_profile(__lookup_profile(&ns->base, hname));
+	read_unlock(&ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * replacement_allowed - test to see if replacement is allowed
+ * @profile: profile to test if it can be replaced  (MAYBE NULL)
+ * @noreplace: true if replacement shouldn't be allowed but addition is okay
+ * @info: Returns - info about why replacement failed (NOT NULL)
+ *
+ * Returns: %0 if replacement allowed else error code
+ */
+static int replacement_allowed(struct aa_profile *profile, int noreplace,
+			       const char **info)
+{
+	if (profile) {
+		if (profile->flags & PFLAG_IMMUTABLE) {
+			*info = "cannot replace immutible profile";
+			return -EPERM;
+		} else if (noreplace) {
+			*info = "profile already exists";
+			return -EEXIST;
+		}
+	}
+	return 0;
+}
+
+/**
+ * __add_new_profile - simple wrapper around __list_add_profile
+ * @ns: namespace that profile is being added to  (NOT NULL)
+ * @policy: the policy container to add the profile to  (NOT NULL)
+ * @profile: profile to add  (NOT NULL)
+ *
+ * add a profile to a list and do other required basic allocations
+ */
+static void __add_new_profile(struct aa_namespace *ns, struct aa_policy *policy,
+			      struct aa_profile *profile)
+{
+	if (policy != &ns->base)
+		/* released on profile replacement or free_profile */
+		profile->parent = aa_get_profile((struct aa_profile *) policy);
+	__list_add_profile(&policy->profiles, profile);
+	/* released on free_profile */
+	profile->sid = aa_alloc_sid();
+	profile->ns = aa_get_namespace(ns);
+}
+
+/**
+ * aa_audit_policy - Do auditing of policy changes
+ * @op: policy operation being performed
+ * @gfp: memory allocation flags
+ * @name: name of profile being manipulated (NOT NULL)
+ * @info: any extra information to be audited (MAYBE NULL)
+ * @error: error code
+ *
+ * Returns: the error to be returned after audit is done
+ */
+static int audit_policy(int op, gfp_t gfp, const char *name, const char *info,
+			int error)
+{
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = op;
+	sa.aad.name = name;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_STATUS, __aa_current_profile(), gfp,
+			&sa, NULL);
+}
+
+/**
+ * aa_may_manage_policy - can the current task manage policy
+ * @op: the policy manipulation operation being done
+ *
+ * Returns: true if the task is allowed to manipulate policy
+ */
+bool aa_may_manage_policy(int op)
+{
+	/* check if loading policy is locked out */
+	if (aa_g_lock_policy) {
+		audit_policy(op, GFP_KERNEL, NULL, "policy_locked", -EACCES);
+		return 0;
+	}
+
+	if (!capable(CAP_MAC_ADMIN)) {
+		audit_policy(op, GFP_KERNEL, NULL, "not policy admin", -EACCES);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * aa_replace_profiles - replace profile(s) on the profile list
+ * @udata: serialized data stream  (NOT NULL)
+ * @size: size of the serialized data stream
+ * @noreplace: true if only doing addition, no replacement allowed
+ *
+ * unpack and replace a profile on the profile list and uses of that profile
+ * by any aa_task_cxt.  If the profile does not exist on the profile list
+ * it is added.
+ *
+ * Returns: size of data consumed else error code on failure.
+ */
+ssize_t aa_replace_profiles(void *udata, size_t size, bool noreplace)
+{
+	struct aa_policy *policy;
+	struct aa_profile *old_profile = NULL, *new_profile = NULL;
+	struct aa_profile *rename_profile = NULL;
+	struct aa_namespace *ns = NULL;
+	const char *ns_name, *name = NULL, *info = NULL;
+	int op = OP_PROF_REPL;
+	ssize_t error;
+
+	/* released below */
+	new_profile = aa_unpack(udata, size, &ns_name);
+	if (IS_ERR(new_profile)) {
+		error = PTR_ERR(new_profile);
+		new_profile = NULL;
+		goto fail;
+	}
+
+	/* released below */
+	ns = aa_prepare_namespace(ns_name);
+	if (!ns) {
+		info = "failed to prepare namespace";
+		error = -ENOMEM;
+		name = ns_name;
+		goto fail;
+	}
+
+	name = new_profile->base.hname;
+
+	write_lock(&ns->lock);
+	/* no ref on policy only use inside lock */
+	policy = __lookup_parent(ns, new_profile->base.hname);
+
+	if (!policy) {
+		info = "parent does not exist";
+		error = -ENOENT;
+		goto audit;
+	}
+
+	old_profile = __find_child(&policy->profiles, new_profile->base.name);
+	/* released below */
+	aa_get_profile(old_profile);
+
+	if (new_profile->rename) {
+		rename_profile = __lookup_profile(&ns->base,
+						  new_profile->rename);
+		/* released below */
+		aa_get_profile(rename_profile);
+
+		if (!rename_profile) {
+			info = "profile to rename does not exist";
+			name = new_profile->rename;
+			error = -ENOENT;
+			goto audit;
+		}
+	}
+
+	error = replacement_allowed(old_profile, noreplace, &info);
+	if (error)
+		goto audit;
+
+	error = replacement_allowed(rename_profile, noreplace, &info);
+	if (error)
+		goto audit;
+
+audit:
+	if (!old_profile && !rename_profile)
+		op = OP_PROF_LOAD;
+
+	error = audit_policy(op, GFP_ATOMIC, name, info, error);
+
+	if (!error) {
+		if (rename_profile)
+			__replace_profile(rename_profile, new_profile);
+		if (old_profile) {
+			/* when there are both rename and old profiles
+			 * inherit old profiles sid
+			 */
+			if (rename_profile)
+				aa_free_sid(new_profile->sid);
+			__replace_profile(old_profile, new_profile);
+		}
+		if (!(old_profile || rename_profile))
+			__add_new_profile(ns, policy, new_profile);
+	}
+	write_unlock(&ns->lock);
+
+out:
+	aa_put_namespace(ns);
+	aa_put_profile(rename_profile);
+	aa_put_profile(old_profile);
+	aa_put_profile(new_profile);
+	if (error)
+		return error;
+	return size;
+
+fail:
+	error = audit_policy(op, GFP_KERNEL, name, info, error);
+	goto out;
+}
+
+/**
+ * aa_remove_profiles - remove profile(s) from the system
+ * @fqname: name of the profile or namespace to remove  (NOT NULL)
+ * @size: size of the name
+ *
+ * Remove a profile or sub namespace from the current namespace, so that
+ * they can not be found anymore and mark them as replaced by unconfined
+ *
+ * NOTE: removing confinement does not restore rlimits to preconfinemnet values
+ *
+ * Returns: size of data consume else error code if fails
+ */
+ssize_t aa_remove_profiles(char *fqname, size_t size)
+{
+	struct aa_namespace *root, *ns = NULL;
+	struct aa_profile *profile = NULL;
+	const char *name = fqname, *info = NULL;
+	ssize_t error = 0;
+
+	if (*fqname == 0) {
+		info = "no profile specified";
+		error = -ENOENT;
+		goto fail;
+	}
+
+	root = aa_current_profile()->ns;
+
+	if (fqname[0] == ':') {
+		char *ns_name;
+		name = aa_split_fqname(fqname, &ns_name);
+		if (ns_name) {
+			/* released below */
+			ns = aa_find_namespace(root, ns_name);
+			if (!ns) {
+				info = "namespace does not exist";
+				error = -ENOENT;
+				goto fail;
+			}
+		}
+	} else
+		/* released below */
+		ns = aa_get_namespace(root);
+
+	write_lock(&ns->lock);
+	if (!name) {
+		/* remove namespace - can only happen if fqname[0] == ':' */
+		__remove_namespace(ns);
+	} else {
+		/* remove profile */
+		profile = aa_get_profile(__lookup_profile(&ns->base, name));
+		if (!profile) {
+			error = -ENOENT;
+			info = "profile does not exist";
+			goto fail_ns_lock;
+		}
+		name = profile->base.hname;
+		__remove_profile(profile);
+	}
+	write_unlock(&ns->lock);
+
+	/* don't fail removal if audit fails */
+	(void) audit_policy(OP_PROF_RM, GFP_KERNEL, name, info, error);
+	aa_put_namespace(ns);
+	aa_put_profile(profile);
+	return size;
+
+fail_ns_lock:
+	write_unlock(&ns->lock);
+	aa_put_namespace(ns);
+
+fail:
+	(void) audit_policy(OP_PROF_RM, GFP_KERNEL, name, info, error);
+	return error;
+}
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
new file mode 100644
index 00000000000..eb3700e9fd3
--- /dev/null
+++ b/security/apparmor/policy_unpack.c
@@ -0,0 +1,703 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor functions for unpacking policy loaded from
+ * userspace.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ * AppArmor uses a serialized binary format for loading policy.
+ * To find policy format documentation look in Documentation/apparmor.txt
+ * All policy is validated before it is used.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/context.h"
+#include "include/match.h"
+#include "include/policy.h"
+#include "include/policy_unpack.h"
+#include "include/sid.h"
+
+/*
+ * The AppArmor interface treats data as a type byte followed by the
+ * actual data.  The interface has the notion of a a named entry
+ * which has a name (AA_NAME typecode followed by name string) followed by
+ * the entries typecode and data.  Named types allow for optional
+ * elements and extensions to be added and tested for without breaking
+ * backwards compatibility.
+ */
+
+enum aa_code {
+	AA_U8,
+	AA_U16,
+	AA_U32,
+	AA_U64,
+	AA_NAME,		/* same as string except it is items name */
+	AA_STRING,
+	AA_BLOB,
+	AA_STRUCT,
+	AA_STRUCTEND,
+	AA_LIST,
+	AA_LISTEND,
+	AA_ARRAY,
+	AA_ARRAYEND,
+};
+
+/*
+ * aa_ext is the read of the buffer containing the serialized profile.  The
+ * data is copied into a kernel buffer in apparmorfs and then handed off to
+ * the unpack routines.
+ */
+struct aa_ext {
+	void *start;
+	void *end;
+	void *pos;		/* pointer to current position in the buffer */
+	u32 version;
+};
+
+/* audit callback for unpack fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	if (sa->aad.iface.target) {
+		struct aa_profile *name = sa->aad.iface.target;
+		audit_log_format(ab, " name=");
+		audit_log_untrustedstring(ab, name->base.hname);
+	}
+	if (sa->aad.iface.pos)
+		audit_log_format(ab, " offset=%ld", sa->aad.iface.pos);
+}
+
+/**
+ * audit_iface - do audit message for policy unpacking/load/replace/remove
+ * @new: profile if it has been allocated (MAYBE NULL)
+ * @name: name of the profile being manipulated (MAYBE NULL)
+ * @info: any extra info about the failure (MAYBE NULL)
+ * @e: buffer position info (NOT NULL)
+ * @error: error code
+ *
+ * Returns: %0 or error
+ */
+static int audit_iface(struct aa_profile *new, const char *name,
+		       const char *info, struct aa_ext *e, int error)
+{
+	struct aa_profile *profile = __aa_current_profile();
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.iface.pos = e->pos - e->start;
+	sa.aad.iface.target = new;
+	sa.aad.name = name;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_STATUS, profile, GFP_KERNEL, &sa,
+			audit_cb);
+}
+
+/* test if read will be in packed data bounds */
+static bool inbounds(struct aa_ext *e, size_t size)
+{
+	return (size <= e->end - e->pos);
+}
+
+/**
+ * aa_u16_chunck - test and do bounds checking for a u16 size based chunk
+ * @e: serialized data read head (NOT NULL)
+ * @chunk: start address for chunk of data (NOT NULL)
+ *
+ * Returns: the size of chunk found with the read head at the end of the chunk.
+ */
+static size_t unpack_u16_chunk(struct aa_ext *e, char **chunk)
+{
+	size_t size = 0;
+
+	if (!inbounds(e, sizeof(u16)))
+		return 0;
+	size = le16_to_cpu(get_unaligned((u16 *) e->pos));
+	e->pos += sizeof(u16);
+	if (!inbounds(e, size))
+		return 0;
+	*chunk = e->pos;
+	e->pos += size;
+	return size;
+}
+
+/* unpack control byte */
+static bool unpack_X(struct aa_ext *e, enum aa_code code)
+{
+	if (!inbounds(e, 1))
+		return 0;
+	if (*(u8 *) e->pos != code)
+		return 0;
+	e->pos++;
+	return 1;
+}
+
+/**
+ * unpack_nameX - check is the next element is of type X with a name of @name
+ * @e: serialized data extent information  (NOT NULL)
+ * @code: type code
+ * @name: name to match to the serialized element.  (MAYBE NULL)
+ *
+ * check that the next serialized data element is of type X and has a tag
+ * name @name.  If @name is specified then there must be a matching
+ * name element in the stream.  If @name is NULL any name element will be
+ * skipped and only the typecode will be tested.
+ *
+ * Returns 1 on success (both type code and name tests match) and the read
+ * head is advanced past the headers
+ *
+ * Returns: 0 if either match fails, the read head does not move
+ */
+static bool unpack_nameX(struct aa_ext *e, enum aa_code code, const char *name)
+{
+	/*
+	 * May need to reset pos if name or type doesn't match
+	 */
+	void *pos = e->pos;
+	/*
+	 * Check for presence of a tagname, and if present name size
+	 * AA_NAME tag value is a u16.
+	 */
+	if (unpack_X(e, AA_NAME)) {
+		char *tag = NULL;
+		size_t size = unpack_u16_chunk(e, &tag);
+		/* if a name is specified it must match. otherwise skip tag */
+		if (name && (!size || strcmp(name, tag)))
+			goto fail;
+	} else if (name) {
+		/* if a name is specified and there is no name tag fail */
+		goto fail;
+	}
+
+	/* now check if type code matches */
+	if (unpack_X(e, code))
+		return 1;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+static bool unpack_u32(struct aa_ext *e, u32 *data, const char *name)
+{
+	if (unpack_nameX(e, AA_U32, name)) {
+		if (!inbounds(e, sizeof(u32)))
+			return 0;
+		if (data)
+			*data = le32_to_cpu(get_unaligned((u32 *) e->pos));
+		e->pos += sizeof(u32);
+		return 1;
+	}
+	return 0;
+}
+
+static bool unpack_u64(struct aa_ext *e, u64 *data, const char *name)
+{
+	if (unpack_nameX(e, AA_U64, name)) {
+		if (!inbounds(e, sizeof(u64)))
+			return 0;
+		if (data)
+			*data = le64_to_cpu(get_unaligned((u64 *) e->pos));
+		e->pos += sizeof(u64);
+		return 1;
+	}
+	return 0;
+}
+
+static size_t unpack_array(struct aa_ext *e, const char *name)
+{
+	if (unpack_nameX(e, AA_ARRAY, name)) {
+		int size;
+		if (!inbounds(e, sizeof(u16)))
+			return 0;
+		size = (int)le16_to_cpu(get_unaligned((u16 *) e->pos));
+		e->pos += sizeof(u16);
+		return size;
+	}
+	return 0;
+}
+
+static size_t unpack_blob(struct aa_ext *e, char **blob, const char *name)
+{
+	if (unpack_nameX(e, AA_BLOB, name)) {
+		u32 size;
+		if (!inbounds(e, sizeof(u32)))
+			return 0;
+		size = le32_to_cpu(get_unaligned((u32 *) e->pos));
+		e->pos += sizeof(u32);
+		if (inbounds(e, (size_t) size)) {
+			*blob = e->pos;
+			e->pos += size;
+			return size;
+		}
+	}
+	return 0;
+}
+
+static int unpack_str(struct aa_ext *e, const char **string, const char *name)
+{
+	char *src_str;
+	size_t size = 0;
+	void *pos = e->pos;
+	*string = NULL;
+	if (unpack_nameX(e, AA_STRING, name)) {
+		size = unpack_u16_chunk(e, &src_str);
+		if (size) {
+			/* strings are null terminated, length is size - 1 */
+			if (src_str[size - 1] != 0)
+				goto fail;
+			*string = src_str;
+		}
+	}
+	return size;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+static int unpack_strdup(struct aa_ext *e, char **string, const char *name)
+{
+	const char *tmp;
+	void *pos = e->pos;
+	int res = unpack_str(e, &tmp, name);
+	*string = NULL;
+
+	if (!res)
+		return 0;
+
+	*string = kmemdup(tmp, res, GFP_KERNEL);
+	if (!*string) {
+		e->pos = pos;
+		return 0;
+	}
+
+	return res;
+}
+
+/**
+ * verify_accept - verify the accept tables of a dfa
+ * @dfa: dfa to verify accept tables of (NOT NULL)
+ * @flags: flags governing dfa
+ *
+ * Returns: 1 if valid accept tables else 0 if error
+ */
+static bool verify_accept(struct aa_dfa *dfa, int flags)
+{
+	int i;
+
+	/* verify accept permissions */
+	for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) {
+		int mode = ACCEPT_TABLE(dfa)[i];
+
+		if (mode & ~DFA_VALID_PERM_MASK)
+			return 0;
+
+		if (ACCEPT_TABLE2(dfa)[i] & ~DFA_VALID_PERM2_MASK)
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * unpack_dfa - unpack a file rule dfa
+ * @e: serialized data extent information (NOT NULL)
+ *
+ * returns dfa or ERR_PTR or NULL if no dfa
+ */
+static struct aa_dfa *unpack_dfa(struct aa_ext *e)
+{
+	char *blob = NULL;
+	size_t size;
+	struct aa_dfa *dfa = NULL;
+
+	size = unpack_blob(e, &blob, "aadfa");
+	if (size) {
+		/*
+		 * The dfa is aligned with in the blob to 8 bytes
+		 * from the beginning of the stream.
+		 */
+		size_t sz = blob - (char *)e->start;
+		size_t pad = ALIGN(sz, 8) - sz;
+		int flags = TO_ACCEPT1_FLAG(YYTD_DATA32) |
+			TO_ACCEPT2_FLAG(YYTD_DATA32);
+
+
+		if (aa_g_paranoid_load)
+			flags |= DFA_FLAG_VERIFY_STATES;
+
+		dfa = aa_dfa_unpack(blob + pad, size - pad, flags);
+
+		if (IS_ERR(dfa))
+			return dfa;
+
+		if (!verify_accept(dfa, flags))
+			goto fail;
+	}
+
+	return dfa;
+
+fail:
+	aa_put_dfa(dfa);
+	return ERR_PTR(-EPROTO);
+}
+
+/**
+ * unpack_trans_table - unpack a profile transition table
+ * @e: serialized data extent information  (NOT NULL)
+ * @profile: profile to add the accept table to (NOT NULL)
+ *
+ * Returns: 1 if table succesfully unpacked
+ */
+static bool unpack_trans_table(struct aa_ext *e, struct aa_profile *profile)
+{
+	void *pos = e->pos;
+
+	/* exec table is optional */
+	if (unpack_nameX(e, AA_STRUCT, "xtable")) {
+		int i, size;
+
+		size = unpack_array(e, NULL);
+		/* currently 4 exec bits and entries 0-3 are reserved iupcx */
+		if (size > 16 - 4)
+			goto fail;
+		profile->file.trans.table = kzalloc(sizeof(char *) * size,
+						    GFP_KERNEL);
+		if (!profile->file.trans.table)
+			goto fail;
+
+		profile->file.trans.size = size;
+		for (i = 0; i < size; i++) {
+			char *str;
+			int c, j, size = unpack_strdup(e, &str, NULL);
+			/* unpack_strdup verifies that the last character is
+			 * null termination byte.
+			 */
+			if (!size)
+				goto fail;
+			profile->file.trans.table[i] = str;
+			/* verify that name doesn't start with space */
+			if (isspace(*str))
+				goto fail;
+
+			/* count internal #  of internal \0 */
+			for (c = j = 0; j < size - 2; j++) {
+				if (!str[j])
+					c++;
+			}
+			if (*str == ':') {
+				/* beginning with : requires an embedded \0,
+				 * verify that exactly 1 internal \0 exists
+				 * trailing \0 already verified by unpack_strdup
+				 */
+				if (c != 1)
+					goto fail;
+				/* first character after : must be valid */
+				if (!str[1])
+					goto fail;
+			} else if (c)
+				/* fail - all other cases with embedded \0 */
+				goto fail;
+		}
+		if (!unpack_nameX(e, AA_ARRAYEND, NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+	return 1;
+
+fail:
+	aa_free_domain_entries(&profile->file.trans);
+	e->pos = pos;
+	return 0;
+}
+
+static bool unpack_rlimits(struct aa_ext *e, struct aa_profile *profile)
+{
+	void *pos = e->pos;
+
+	/* rlimits are optional */
+	if (unpack_nameX(e, AA_STRUCT, "rlimits")) {
+		int i, size;
+		u32 tmp = 0;
+		if (!unpack_u32(e, &tmp, NULL))
+			goto fail;
+		profile->rlimits.mask = tmp;
+
+		size = unpack_array(e, NULL);
+		if (size > RLIM_NLIMITS)
+			goto fail;
+		for (i = 0; i < size; i++) {
+			u64 tmp = 0;
+			int a = aa_map_resource(i);
+			if (!unpack_u64(e, &tmp, NULL))
+				goto fail;
+			profile->rlimits.limits[a].rlim_max = tmp;
+		}
+		if (!unpack_nameX(e, AA_ARRAYEND, NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+	return 1;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+/**
+ * unpack_profile - unpack a serialized profile
+ * @e: serialized data extent information (NOT NULL)
+ *
+ * NOTE: unpack profile sets audit struct if there is a failure
+ */
+static struct aa_profile *unpack_profile(struct aa_ext *e)
+{
+	struct aa_profile *profile = NULL;
+	const char *name = NULL;
+	int error = -EPROTO;
+	kernel_cap_t tmpcap;
+	u32 tmp;
+
+	/* check that we have the right struct being passed */
+	if (!unpack_nameX(e, AA_STRUCT, "profile"))
+		goto fail;
+	if (!unpack_str(e, &name, NULL))
+		goto fail;
+
+	profile = aa_alloc_profile(name);
+	if (!profile)
+		return ERR_PTR(-ENOMEM);
+
+	/* profile renaming is optional */
+	(void) unpack_str(e, &profile->rename, "rename");
+
+	/* xmatch is optional and may be NULL */
+	profile->xmatch = unpack_dfa(e);
+	if (IS_ERR(profile->xmatch)) {
+		error = PTR_ERR(profile->xmatch);
+		profile->xmatch = NULL;
+		goto fail;
+	}
+	/* xmatch_len is not optional if xmatch is set */
+	if (profile->xmatch) {
+		if (!unpack_u32(e, &tmp, NULL))
+			goto fail;
+		profile->xmatch_len = tmp;
+	}
+
+	/* per profile debug flags (complain, audit) */
+	if (!unpack_nameX(e, AA_STRUCT, "flags"))
+		goto fail;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->flags |= PFLAG_HAT;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->mode = APPARMOR_COMPLAIN;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->audit = AUDIT_ALL;
+
+	if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+		goto fail;
+
+	/* path_flags is optional */
+	if (unpack_u32(e, &profile->path_flags, "path_flags"))
+		profile->path_flags |= profile->flags & PFLAG_MEDIATE_DELETED;
+	else
+		/* set a default value if path_flags field is not present */
+		profile->path_flags = PFLAG_MEDIATE_DELETED;
+
+	if (!unpack_u32(e, &(profile->caps.allow.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &(profile->caps.audit.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &(profile->caps.quiet.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &tmpcap.cap[0], NULL))
+		goto fail;
+
+	if (unpack_nameX(e, AA_STRUCT, "caps64")) {
+		/* optional upper half of 64 bit caps */
+		if (!unpack_u32(e, &(profile->caps.allow.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.audit.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.quiet.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(tmpcap.cap[1]), NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+
+	if (unpack_nameX(e, AA_STRUCT, "capsx")) {
+		/* optional extended caps mediation mask */
+		if (!unpack_u32(e, &(profile->caps.extended.cap[0]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.extended.cap[1]), NULL))
+			goto fail;
+	}
+
+	if (!unpack_rlimits(e, profile))
+		goto fail;
+
+	/* get file rules */
+	profile->file.dfa = unpack_dfa(e);
+	if (IS_ERR(profile->file.dfa)) {
+		error = PTR_ERR(profile->file.dfa);
+		profile->file.dfa = NULL;
+		goto fail;
+	}
+
+	if (!unpack_u32(e, &profile->file.start, "dfa_start"))
+		/* default start state */
+		profile->file.start = DFA_START;
+
+	if (!unpack_trans_table(e, profile))
+		goto fail;
+
+	if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+		goto fail;
+
+	return profile;
+
+fail:
+	if (profile)
+		name = NULL;
+	else if (!name)
+		name = "unknown";
+	audit_iface(profile, name, "failed to unpack profile", e, error);
+	aa_put_profile(profile);
+
+	return ERR_PTR(error);
+}
+
+/**
+ * verify_head - unpack serialized stream header
+ * @e: serialized data read head (NOT NULL)
+ * @ns: Returns - namespace if one is specified else NULL (NOT NULL)
+ *
+ * Returns: error or 0 if header is good
+ */
+static int verify_header(struct aa_ext *e, const char **ns)
+{
+	int error = -EPROTONOSUPPORT;
+	/* get the interface version */
+	if (!unpack_u32(e, &e->version, "version")) {
+		audit_iface(NULL, NULL, "invalid profile format", e, error);
+		return error;
+	}
+
+	/* check that the interface version is currently supported */
+	if (e->version != 5) {
+		audit_iface(NULL, NULL, "unsupported interface version", e,
+			    error);
+		return error;
+	}
+
+	/* read the namespace if present */
+	if (!unpack_str(e, ns, "namespace"))
+		*ns = NULL;
+
+	return 0;
+}
+
+static bool verify_xindex(int xindex, int table_size)
+{
+	int index, xtype;
+	xtype = xindex & AA_X_TYPE_MASK;
+	index = xindex & AA_X_INDEX_MASK;
+	if (xtype == AA_X_TABLE && index > table_size)
+		return 0;
+	return 1;
+}
+
+/* verify dfa xindexes are in range of transition tables */
+static bool verify_dfa_xindex(struct aa_dfa *dfa, int table_size)
+{
+	int i;
+	for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) {
+		if (!verify_xindex(dfa_user_xindex(dfa, i), table_size))
+			return 0;
+		if (!verify_xindex(dfa_other_xindex(dfa, i), table_size))
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * verify_profile - Do post unpack analysis to verify profile consistency
+ * @profile: profile to verify (NOT NULL)
+ *
+ * Returns: 0 if passes verification else error
+ */
+static int verify_profile(struct aa_profile *profile)
+{
+	if (aa_g_paranoid_load) {
+		if (profile->file.dfa &&
+		    !verify_dfa_xindex(profile->file.dfa,
+				       profile->file.trans.size)) {
+			audit_iface(profile, NULL, "Invalid named transition",
+				    NULL, -EPROTO);
+			return -EPROTO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * aa_unpack - unpack packed binary profile data loaded from user space
+ * @udata: user data copied to kmem  (NOT NULL)
+ * @size: the size of the user data
+ * @ns: Returns namespace profile is in if specified else NULL (NOT NULL)
+ *
+ * Unpack user data and return refcounted allocated profile or ERR_PTR
+ *
+ * Returns: profile else error pointer if fails to unpack
+ */
+struct aa_profile *aa_unpack(void *udata, size_t size, const char **ns)
+{
+	struct aa_profile *profile = NULL;
+	int error;
+	struct aa_ext e = {
+		.start = udata,
+		.end = udata + size,
+		.pos = udata,
+	};
+
+	error = verify_header(&e, ns);
+	if (error)
+		return ERR_PTR(error);
+
+	profile = unpack_profile(&e);
+	if (IS_ERR(profile))
+		return profile;
+
+	error = verify_profile(profile);
+	if (error) {
+		aa_put_profile(profile);
+		profile = ERR_PTR(error);
+	}
+
+	/* return refcount */
+	return profile;
+}
diff --git a/security/apparmor/procattr.c b/security/apparmor/procattr.c
new file mode 100644
index 00000000000..04a2cf8d1b6
--- /dev/null
+++ b/security/apparmor/procattr.c
@@ -0,0 +1,170 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /proc/<pid>/attr/ interface functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include "include/apparmor.h"
+#include "include/context.h"
+#include "include/policy.h"
+#include "include/domain.h"
+
+
+/**
+ * aa_getprocattr - Return the profile information for @profile
+ * @profile: the profile to print profile info about  (NOT NULL)
+ * @string: Returns - string containing the profile info (NOT NULL)
+ *
+ * Returns: length of @string on success else error on failure
+ *
+ * Requires: profile != NULL
+ *
+ * Creates a string containing the namespace_name://profile_name for
+ * @profile.
+ *
+ * Returns: size of string placed in @string else error code on failure
+ */
+int aa_getprocattr(struct aa_profile *profile, char **string)
+{
+	char *str;
+	int len = 0, mode_len = 0, ns_len = 0, name_len;
+	const char *mode_str = profile_mode_names[profile->mode];
+	const char *ns_name = NULL;
+	struct aa_namespace *ns = profile->ns;
+	struct aa_namespace *current_ns = __aa_current_profile()->ns;
+	char *s;
+
+	if (!aa_ns_visible(current_ns, ns))
+		return -EACCES;
+
+	ns_name = aa_ns_name(current_ns, ns);
+	ns_len = strlen(ns_name);
+
+	/* if the visible ns_name is > 0 increase size for : :// seperator */
+	if (ns_len)
+		ns_len += 4;
+
+	/* unconfined profiles don't have a mode string appended */
+	if (!unconfined(profile))
+		mode_len = strlen(mode_str) + 3;	/* + 3 for _() */
+
+	name_len = strlen(profile->base.hname);
+	len = mode_len + ns_len + name_len + 1;	    /* + 1 for \n */
+	s = str = kmalloc(len + 1, GFP_KERNEL);	    /* + 1 \0 */
+	if (!str)
+		return -ENOMEM;
+
+	if (ns_len) {
+		/* skip over prefix current_ns->base.hname and separating // */
+		sprintf(s, ":%s://", ns_name);
+		s += ns_len;
+	}
+	if (unconfined(profile))
+		/* mode string not being appended */
+		sprintf(s, "%s\n", profile->base.hname);
+	else
+		sprintf(s, "%s (%s)\n", profile->base.hname, mode_str);
+	*string = str;
+
+	/* NOTE: len does not include \0 of string, not saved as part of file */
+	return len;
+}
+
+/**
+ * split_token_from_name - separate a string of form  <token>^<name>
+ * @op: operation being checked
+ * @args: string to parse  (NOT NULL)
+ * @token: stores returned parsed token value  (NOT NULL)
+ *
+ * Returns: start position of name after token else NULL on failure
+ */
+static char *split_token_from_name(int op, char *args, u64 * token)
+{
+	char *name;
+
+	*token = simple_strtoull(args, &name, 16);
+	if ((name == args) || *name != '^') {
+		AA_ERROR("%s: Invalid input '%s'", op_table[op], args);
+		return ERR_PTR(-EINVAL);
+	}
+
+	name++;			/* skip ^ */
+	if (!*name)
+		name = NULL;
+	return name;
+}
+
+/**
+ * aa_setprocattr_chagnehat - handle procattr interface to change_hat
+ * @args: args received from writing to /proc/<pid>/attr/current (NOT NULL)
+ * @size: size of the args
+ * @test: true if this is a test of change_hat permissions
+ *
+ * Returns: %0 or error code if change_hat fails
+ */
+int aa_setprocattr_changehat(char *args, size_t size, int test)
+{
+	char *hat;
+	u64 token;
+	const char *hats[16];		/* current hard limit on # of names */
+	int count = 0;
+
+	hat = split_token_from_name(OP_CHANGE_HAT, args, &token);
+	if (IS_ERR(hat))
+		return PTR_ERR(hat);
+
+	if (!hat && !token) {
+		AA_ERROR("change_hat: Invalid input, NULL hat and NULL magic");
+		return -EINVAL;
+	}
+
+	if (hat) {
+		/* set up hat name vector, args guaranteed null terminated
+		 * at args[size] by setprocattr.
+		 *
+		 * If there are multiple hat names in the buffer each is
+		 * separated by a \0.  Ie. userspace writes them pre tokenized
+		 */
+		char *end = args + size;
+		for (count = 0; (hat < end) && count < 16; ++count) {
+			char *next = hat + strlen(hat) + 1;
+			hats[count] = hat;
+			hat = next;
+		}
+	}
+
+	AA_DEBUG("%s: Magic 0x%llx Hat '%s'\n",
+		 __func__, token, hat ? hat : NULL);
+
+	return aa_change_hat(hats, count, token, test);
+}
+
+/**
+ * aa_setprocattr_changeprofile - handle procattr interface to changeprofile
+ * @fqname: args received from writting to /proc/<pid>/attr/current (NOT NULL)
+ * @onexec: true if change_profile should be delayed until exec
+ * @test: true if this is a test of change_profile permissions
+ *
+ * Returns: %0 or error code if change_profile fails
+ */
+int aa_setprocattr_changeprofile(char *fqname, bool onexec, int test)
+{
+	char *name, *ns_name;
+
+	name = aa_split_fqname(fqname, &ns_name);
+	return aa_change_profile(ns_name, name, onexec, test);
+}
+
+int aa_setprocattr_permipc(char *fqname)
+{
+	/* TODO: add ipc permission querying */
+	return -ENOTSUPP;
+}
diff --git a/security/apparmor/resource.c b/security/apparmor/resource.c
new file mode 100644
index 00000000000..4a368f1fd36
--- /dev/null
+++ b/security/apparmor/resource.c
@@ -0,0 +1,134 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor resource mediation and attachment
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/audit.h>
+
+#include "include/audit.h"
+#include "include/resource.h"
+#include "include/policy.h"
+
+/*
+ * Table of rlimit names: we generate it from resource.h.
+ */
+#include "rlim_names.h"
+
+/* audit callback for resource specific fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+
+	audit_log_format(ab, " rlimit=%s value=%lu",
+			 rlim_names[sa->aad.rlim.rlim], sa->aad.rlim.max);
+}
+
+/**
+ * audit_resource - audit setting resource limit
+ * @profile: profile being enforced  (NOT NULL)
+ * @resoure: rlimit being auditing
+ * @value: value being set
+ * @error: error value
+ *
+ * Returns: 0 or sa->error else other error code on failure
+ */
+static int audit_resource(struct aa_profile *profile, unsigned int resource,
+			  unsigned long value, int error)
+{
+	struct common_audit_data sa;
+
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = OP_SETRLIMIT,
+	sa.aad.rlim.rlim = resource;
+	sa.aad.rlim.max = value;
+	sa.aad.error = error;
+	return aa_audit(AUDIT_APPARMOR_AUTO, profile, GFP_KERNEL, &sa,
+			audit_cb);
+}
+
+/**
+ * aa_map_resouce - map compiled policy resource to internal #
+ * @resource: flattened policy resource number
+ *
+ * Returns: resource # for the current architecture.
+ *
+ * rlimit resource can vary based on architecture, map the compiled policy
+ * resource # to the internal representation for the architecture.
+ */
+int aa_map_resource(int resource)
+{
+	return rlim_map[resource];
+}
+
+/**
+ * aa_task_setrlimit - test permission to set an rlimit
+ * @profile - profile confining the task  (NOT NULL)
+ * @resource - the resource being set
+ * @new_rlim - the new resource limit  (NOT NULL)
+ *
+ * Control raising the processes hard limit.
+ *
+ * Returns: 0 or error code if setting resource failed
+ */
+int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
+		      struct rlimit *new_rlim)
+{
+	int error = 0;
+
+	if (profile->rlimits.mask & (1 << resource) &&
+	    new_rlim->rlim_max > profile->rlimits.limits[resource].rlim_max)
+
+		error = audit_resource(profile, resource, new_rlim->rlim_max,
+			-EACCES);
+
+	return error;
+}
+
+/**
+ * __aa_transition_rlimits - apply new profile rlimits
+ * @old: old profile on task  (NOT NULL)
+ * @new: new profile with rlimits to apply  (NOT NULL)
+ */
+void __aa_transition_rlimits(struct aa_profile *old, struct aa_profile *new)
+{
+	unsigned int mask = 0;
+	struct rlimit *rlim, *initrlim;
+	int i;
+
+	/* for any rlimits the profile controlled reset the soft limit
+	 * to the less of the tasks hard limit and the init tasks soft limit
+	 */
+	if (old->rlimits.mask) {
+		for (i = 0, mask = 1; i < RLIM_NLIMITS; i++, mask <<= 1) {
+			if (old->rlimits.mask & mask) {
+				rlim = current->signal->rlim + i;
+				initrlim = init_task.signal->rlim + i;
+				rlim->rlim_cur = min(rlim->rlim_max,
+						     initrlim->rlim_cur);
+			}
+		}
+	}
+
+	/* set any new hard limits as dictated by the new profile */
+	if (!new->rlimits.mask)
+		return;
+	for (i = 0, mask = 1; i < RLIM_NLIMITS; i++, mask <<= 1) {
+		if (!(new->rlimits.mask & mask))
+			continue;
+
+		rlim = current->signal->rlim + i;
+		rlim->rlim_max = min(rlim->rlim_max,
+				     new->rlimits.limits[i].rlim_max);
+		/* soft limit should not exceed hard limit */
+		rlim->rlim_cur = min(rlim->rlim_cur, rlim->rlim_max);
+	}
+}
diff --git a/security/apparmor/sid.c b/security/apparmor/sid.c
new file mode 100644
index 00000000000..f0b34f76ebe
--- /dev/null
+++ b/security/apparmor/sid.c
@@ -0,0 +1,55 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security identifier (sid) manipulation fns
+ *
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor allocates a unique sid for every profile loaded.  If a profile
+ * is replaced it receives the sid of the profile it is replacing.
+ *
+ * The sid value of 0 is invalid.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include "include/sid.h"
+
+/* global counter from which sids are allocated */
+static u32 global_sid;
+static DEFINE_SPINLOCK(sid_lock);
+
+/* TODO FIXME: add sid to profile mapping, and sid recycling */
+
+/**
+ * aa_alloc_sid - allocate a new sid for a profile
+ */
+u32 aa_alloc_sid(void)
+{
+	u32 sid;
+
+	/*
+	 * TODO FIXME: sid recycling - part of profile mapping table
+	 */
+	spin_lock(&sid_lock);
+	sid = (++global_sid);
+	spin_unlock(&sid_lock);
+	return sid;
+}
+
+/**
+ * aa_free_sid - free a sid
+ * @sid: sid to free
+ */
+void aa_free_sid(u32 sid)
+{
+	;			/* NOP ATM */
+}
diff --git a/security/capability.c b/security/capability.c
index 8168e3ecd5b..a0bbf30fb6d 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -27,7 +27,7 @@ static int cap_quota_on(struct dentry *dentry)
 	return 0;
 }
 
-static int cap_bprm_check_security (struct linux_binprm *bprm)
+static int cap_bprm_check_security(struct linux_binprm *bprm)
 {
 	return 0;
 }
@@ -268,8 +268,7 @@ static int cap_path_rename(struct path *old_path, struct dentry *old_dentry,
 	return 0;
 }
 
-static int cap_path_truncate(struct path *path, loff_t length,
-			     unsigned int time_attrs)
+static int cap_path_truncate(struct path *path)
 {
 	return 0;
 }
diff --git a/security/inode.c b/security/inode.c
index 1c812e87450..8c777f022ad 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -86,7 +86,7 @@ static int mknod(struct inode *dir, struct dentry *dentry,
 			 int mode, dev_t dev)
 {
 	struct inode *inode;
-	int error = -EPERM;
+	int error = -ENOMEM;
 
 	if (dentry->d_inode)
 		return -EEXIST;
@@ -166,6 +166,8 @@ static int create_by_name(const char *name, mode_t mode,
 			error = mkdir(parent->d_inode, *dentry, mode);
 		else
 			error = create(parent->d_inode, *dentry, mode);
+		if (error)
+			dput(*dentry);
 	} else
 		error = PTR_ERR(*dentry);
 	mutex_unlock(&parent->d_inode->i_mutex);
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 8fe736aabe7..ef21b96a0b4 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -45,7 +45,8 @@ static ssize_t ima_show_htable_violations(struct file *filp,
 }
 
 static const struct file_operations ima_htable_violations_ops = {
-	.read = ima_show_htable_violations
+	.read = ima_show_htable_violations,
+	.llseek = generic_file_llseek,
 };
 
 static ssize_t ima_show_measurements_count(struct file *filp,
@@ -57,7 +58,8 @@ static ssize_t ima_show_measurements_count(struct file *filp,
 }
 
 static const struct file_operations ima_measurements_count_ops = {
-	.read = ima_show_measurements_count
+	.read = ima_show_measurements_count,
+	.llseek = generic_file_llseek,
 };
 
 /* returns pointer to hlist_node */
@@ -319,7 +321,8 @@ static int ima_release_policy(struct inode *inode, struct file *file)
 static const struct file_operations ima_measure_policy_ops = {
 	.open = ima_open_policy,
 	.write = ima_write_policy,
-	.release = ima_release_policy
+	.release = ima_release_policy,
+	.llseek = generic_file_llseek,
 };
 
 int __init ima_fs_init(void)
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 38783dcf6c6..addb67b169f 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -114,6 +114,10 @@ extern key_ref_t keyring_search_aux(key_ref_t keyring_ref,
 				    const void *description,
 				    key_match_func_t match);
 
+extern key_ref_t search_my_process_keyrings(struct key_type *type,
+					    const void *description,
+					    key_match_func_t match,
+					    const struct cred *cred);
 extern key_ref_t search_process_keyrings(struct key_type *type,
 					 const void *description,
 					 key_match_func_t match,
@@ -134,6 +138,7 @@ extern struct key *request_key_and_link(struct key_type *type,
 					struct key *dest_keyring,
 					unsigned long flags);
 
+extern int lookup_user_key_possessed(const struct key *key, const void *target);
 extern key_ref_t lookup_user_key(key_serial_t id, unsigned long flags,
 				 key_perm_t perm);
 #define KEY_LOOKUP_CREATE	0x01
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 13074b45474..b2b0998d6ab 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -33,7 +33,7 @@ static int key_get_type_from_user(char *type,
 	ret = strncpy_from_user(type, _type, len);
 
 	if (ret < 0)
-		return -EFAULT;
+		return ret;
 
 	if (ret == 0 || ret >= len)
 		return -EINVAL;
@@ -505,13 +505,11 @@ okay:
 
 	ret = snprintf(tmpbuf, PAGE_SIZE - 1,
 		       "%s;%d;%d;%08x;%s",
-		       key_ref_to_ptr(key_ref)->type->name,
-		       key_ref_to_ptr(key_ref)->uid,
-		       key_ref_to_ptr(key_ref)->gid,
-		       key_ref_to_ptr(key_ref)->perm,
-		       key_ref_to_ptr(key_ref)->description ?
-		       key_ref_to_ptr(key_ref)->description : ""
-		       );
+		       key->type->name,
+		       key->uid,
+		       key->gid,
+		       key->perm,
+		       key->description ?: "");
 
 	/* include a NUL char at the end of the data */
 	if (ret > PAGE_SIZE - 1)
@@ -1080,7 +1078,7 @@ set:
 	return old_setting;
 error:
 	abort_creds(new);
-	return -EINVAL;
+	return ret;
 
 } /* end keyctl_set_reqkey_keyring() */
 
@@ -1091,7 +1089,7 @@ error:
 long keyctl_set_timeout(key_serial_t id, unsigned timeout)
 {
 	struct timespec now;
-	struct key *key;
+	struct key *key, *instkey;
 	key_ref_t key_ref;
 	time_t expiry;
 	long ret;
@@ -1099,10 +1097,25 @@ long keyctl_set_timeout(key_serial_t id, unsigned timeout)
 	key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
 				  KEY_SETATTR);
 	if (IS_ERR(key_ref)) {
+		/* setting the timeout on a key under construction is permitted
+		 * if we have the authorisation token handy */
+		if (PTR_ERR(key_ref) == -EACCES) {
+			instkey = key_get_instantiation_authkey(id);
+			if (!IS_ERR(instkey)) {
+				key_put(instkey);
+				key_ref = lookup_user_key(id,
+							  KEY_LOOKUP_PARTIAL,
+							  0);
+				if (!IS_ERR(key_ref))
+					goto okay;
+			}
+		}
+
 		ret = PTR_ERR(key_ref);
 		goto error;
 	}
 
+okay:
 	key = key_ref_to_ptr(key_ref);
 
 	/* make the changes with the locks held to prevent races */
diff --git a/security/keys/proc.c b/security/keys/proc.c
index 068b66ea2f1..70373966816 100644
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -184,20 +184,36 @@ static void proc_keys_stop(struct seq_file *p, void *v)
 
 static int proc_keys_show(struct seq_file *m, void *v)
 {
+	const struct cred *cred = current_cred();
 	struct rb_node *_p = v;
 	struct key *key = rb_entry(_p, struct key, serial_node);
 	struct timespec now;
 	unsigned long timo;
+	key_ref_t key_ref, skey_ref;
 	char xbuf[12];
 	int rc;
 
+	key_ref = make_key_ref(key, 0);
+
+	/* determine if the key is possessed by this process (a test we can
+	 * skip if the key does not indicate the possessor can view it
+	 */
+	if (key->perm & KEY_POS_VIEW) {
+		skey_ref = search_my_process_keyrings(key->type, key,
+						      lookup_user_key_possessed,
+						      cred);
+		if (!IS_ERR(skey_ref)) {
+			key_ref_put(skey_ref);
+			key_ref = make_key_ref(key, 1);
+		}
+	}
+
 	/* check whether the current task is allowed to view the key (assuming
 	 * non-possession)
 	 * - the caller holds a spinlock, and thus the RCU read lock, making our
 	 *   access to __current_cred() safe
 	 */
-	rc = key_task_permission(make_key_ref(key, 0), current_cred(),
-				 KEY_VIEW);
+	rc = key_task_permission(key_ref, cred, KEY_VIEW);
 	if (rc < 0)
 		return 0;
 
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 6b8e4ff4cc6..f8e7251ae2c 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -309,22 +309,19 @@ void key_fsgid_changed(struct task_struct *tsk)
 
 /*****************************************************************************/
 /*
- * search the process keyrings for the first matching key
+ * search only my process keyrings for the first matching key
  * - we use the supplied match function to see if the description (or other
  *   feature of interest) matches
  * - we return -EAGAIN if we didn't find any matching key
  * - we return -ENOKEY if we found only negative matching keys
  */
-key_ref_t search_process_keyrings(struct key_type *type,
-				  const void *description,
-				  key_match_func_t match,
-				  const struct cred *cred)
+key_ref_t search_my_process_keyrings(struct key_type *type,
+				     const void *description,
+				     key_match_func_t match,
+				     const struct cred *cred)
 {
-	struct request_key_auth *rka;
 	key_ref_t key_ref, ret, err;
 
-	might_sleep();
-
 	/* we want to return -EAGAIN or -ENOKEY if any of the keyrings were
 	 * searchable, but we failed to find a key or we found a negative key;
 	 * otherwise we want to return a sample error (probably -EACCES) if
@@ -424,6 +421,36 @@ key_ref_t search_process_keyrings(struct key_type *type,
 		}
 	}
 
+	/* no key - decide on the error we're going to go for */
+	key_ref = ret ? ret : err;
+
+found:
+	return key_ref;
+}
+
+/*****************************************************************************/
+/*
+ * search the process keyrings for the first matching key
+ * - we use the supplied match function to see if the description (or other
+ *   feature of interest) matches
+ * - we return -EAGAIN if we didn't find any matching key
+ * - we return -ENOKEY if we found only negative matching keys
+ */
+key_ref_t search_process_keyrings(struct key_type *type,
+				  const void *description,
+				  key_match_func_t match,
+				  const struct cred *cred)
+{
+	struct request_key_auth *rka;
+	key_ref_t key_ref, ret = ERR_PTR(-EACCES), err;
+
+	might_sleep();
+
+	key_ref = search_my_process_keyrings(type, description, match, cred);
+	if (!IS_ERR(key_ref))
+		goto found;
+	err = key_ref;
+
 	/* if this process has an instantiation authorisation key, then we also
 	 * search the keyrings of the process mentioned there
 	 * - we don't permit access to request_key auth keys via this method
@@ -446,24 +473,19 @@ key_ref_t search_process_keyrings(struct key_type *type,
 			if (!IS_ERR(key_ref))
 				goto found;
 
-			switch (PTR_ERR(key_ref)) {
-			case -EAGAIN: /* no key */
-				if (ret)
-					break;
-			case -ENOKEY: /* negative key */
-				ret = key_ref;
-				break;
-			default:
-				err = key_ref;
-				break;
-			}
+			ret = key_ref;
 		} else {
 			up_read(&cred->request_key_auth->sem);
 		}
 	}
 
 	/* no key - decide on the error we're going to go for */
-	key_ref = ret ? ret : err;
+	if (err == ERR_PTR(-ENOKEY) || ret == ERR_PTR(-ENOKEY))
+		key_ref = ERR_PTR(-ENOKEY);
+	else if (err == ERR_PTR(-EACCES))
+		key_ref = ret;
+	else
+		key_ref = err;
 
 found:
 	return key_ref;
@@ -474,7 +496,7 @@ found:
 /*
  * see if the key we're looking at is the target key
  */
-static int lookup_user_key_possessed(const struct key *key, const void *target)
+int lookup_user_key_possessed(const struct key *key, const void *target)
 {
 	return key == target;
 
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index f5ec9ac5d57..0d26f689bd7 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -144,6 +144,7 @@ static int call_sbin_request_key(struct key_construction *cons,
 	prkey = 0;
 	if (cred->tgcred->process_keyring)
 		prkey = cred->tgcred->process_keyring->serial;
+	sprintf(keyring_str[1], "%d", prkey);
 
 	rcu_read_lock();
 	session = rcu_dereference(cred->tgcred->session_keyring);
diff --git a/security/security.c b/security/security.c
index 351942a4ca0..e8c87b8601b 100644
--- a/security/security.c
+++ b/security/security.c
@@ -417,12 +417,11 @@ int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
 					 new_dentry);
 }
 
-int security_path_truncate(struct path *path, loff_t length,
-			   unsigned int time_attrs)
+int security_path_truncate(struct path *path)
 {
 	if (unlikely(IS_PRIVATE(path->dentry->d_inode)))
 		return 0;
-	return security_ops->path_truncate(path, length, time_attrs);
+	return security_ops->path_truncate(path);
 }
 
 int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 7f1a304712a..9da6420e205 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -288,7 +288,6 @@ static struct avc_node *avc_alloc_node(void)
 	if (!node)
 		goto out;
 
-	INIT_RCU_HEAD(&node->rhead);
 	INIT_HLIST_NODE(&node->list);
 	avc_cache_stats_incr(allocations);
 
@@ -489,9 +488,29 @@ void avc_audit(u32 ssid, u32 tsid,
 	struct common_audit_data stack_data;
 	u32 denied, audited;
 	denied = requested & ~avd->allowed;
-	if (denied)
+	if (denied) {
 		audited = denied & avd->auditdeny;
-	else if (result)
+		/*
+		 * a->selinux_audit_data.auditdeny is TRICKY!  Setting a bit in
+		 * this field means that ANY denials should NOT be audited if
+		 * the policy contains an explicit dontaudit rule for that
+		 * permission.  Take notice that this is unrelated to the
+		 * actual permissions that were denied.  As an example lets
+		 * assume:
+		 *
+		 * denied == READ
+		 * avd.auditdeny & ACCESS == 0 (not set means explicit rule)
+		 * selinux_audit_data.auditdeny & ACCESS == 1
+		 *
+		 * We will NOT audit the denial even though the denied
+		 * permission was READ and the auditdeny checks were for
+		 * ACCESS
+		 */
+		if (a &&
+		    a->selinux_audit_data.auditdeny &&
+		    !(a->selinux_audit_data.auditdeny & avd->auditdeny))
+			audited = 0;
+	} else if (result)
 		audited = denied = requested;
 	else
 		audited = requested & avd->auditallow;
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 5c9f25ba1c9..9b40f4c0ac7 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -87,9 +87,6 @@
 #include "netlabel.h"
 #include "audit.h"
 
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
 #define NUM_SEL_MNT_OPTS 5
 
 extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm);
@@ -188,7 +185,7 @@ static inline u32 task_sid(const struct task_struct *task)
  */
 static inline u32 current_sid(void)
 {
-	const struct task_security_struct *tsec = current_cred()->security;
+	const struct task_security_struct *tsec = current_security();
 
 	return tsec->sid;
 }
@@ -279,32 +276,6 @@ static void superblock_free_security(struct super_block *sb)
 	kfree(sbsec);
 }
 
-static int sk_alloc_security(struct sock *sk, int family, gfp_t priority)
-{
-	struct sk_security_struct *sksec;
-
-	sksec = kzalloc(sizeof(*sksec), priority);
-	if (!sksec)
-		return -ENOMEM;
-
-	sksec->peer_sid = SECINITSID_UNLABELED;
-	sksec->sid = SECINITSID_UNLABELED;
-	sk->sk_security = sksec;
-
-	selinux_netlbl_sk_security_reset(sksec);
-
-	return 0;
-}
-
-static void sk_free_security(struct sock *sk)
-{
-	struct sk_security_struct *sksec = sk->sk_security;
-
-	sk->sk_security = NULL;
-	selinux_netlbl_sk_security_free(sksec);
-	kfree(sksec);
-}
-
 /* The security server must be initialized before
    any labeling or access decisions can be provided. */
 extern int ss_initialized;
@@ -1584,8 +1555,7 @@ static int may_create(struct inode *dir,
 		      struct dentry *dentry,
 		      u16 tclass)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	struct inode_security_struct *dsec;
 	struct superblock_security_struct *sbsec;
 	u32 sid, newsid;
@@ -1806,27 +1776,9 @@ static inline u32 open_file_to_av(struct file *file)
 {
 	u32 av = file_to_av(file);
 
-	if (selinux_policycap_openperm) {
-		mode_t mode = file->f_path.dentry->d_inode->i_mode;
-		/*
-		 * lnk files and socks do not really have an 'open'
-		 */
-		if (S_ISREG(mode))
-			av |= FILE__OPEN;
-		else if (S_ISCHR(mode))
-			av |= CHR_FILE__OPEN;
-		else if (S_ISBLK(mode))
-			av |= BLK_FILE__OPEN;
-		else if (S_ISFIFO(mode))
-			av |= FIFO_FILE__OPEN;
-		else if (S_ISDIR(mode))
-			av |= DIR__OPEN;
-		else if (S_ISSOCK(mode))
-			av |= SOCK_FILE__OPEN;
-		else
-			printk(KERN_ERR "SELinux: WARNING: inside %s with "
-				"unknown mode:%o\n", __func__, mode);
-	}
+	if (selinux_policycap_openperm)
+		av |= FILE__OPEN;
+
 	return av;
 }
 
@@ -2183,8 +2135,7 @@ static int selinux_bprm_set_creds(struct linux_binprm *bprm)
 
 static int selinux_bprm_secureexec(struct linux_binprm *bprm)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	u32 sid, osid;
 	int atsecure = 0;
 
@@ -2559,8 +2510,7 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir,
 				       char **name, void **value,
 				       size_t *len)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	struct inode_security_struct *dsec;
 	struct superblock_security_struct *sbsec;
 	u32 sid, newsid, clen;
@@ -2676,14 +2626,26 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *na
 static int selinux_inode_permission(struct inode *inode, int mask)
 {
 	const struct cred *cred = current_cred();
+	struct common_audit_data ad;
+	u32 perms;
+	bool from_access;
 
-	if (!mask) {
-		/* No permission to check.  Existence test. */
+	from_access = mask & MAY_ACCESS;
+	mask &= (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND);
+
+	/* No permission to check.  Existence test. */
+	if (!mask)
 		return 0;
-	}
 
-	return inode_has_perm(cred, inode,
-			      file_mask_to_av(inode->i_mode, mask), NULL);
+	COMMON_AUDIT_DATA_INIT(&ad, FS);
+	ad.u.fs.inode = inode;
+
+	if (from_access)
+		ad.selinux_audit_data.auditdeny |= FILE__AUDIT_ACCESS;
+
+	perms = file_mask_to_av(inode->i_mode, mask);
+
+	return inode_has_perm(cred, inode, perms, &ad);
 }
 
 static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
@@ -3671,71 +3633,54 @@ static int selinux_skb_peerlbl_sid(struct sk_buff *skb, u16 family, u32 *sid)
 }
 
 /* socket security operations */
-static int socket_has_perm(struct task_struct *task, struct socket *sock,
-			   u32 perms)
+
+static u32 socket_sockcreate_sid(const struct task_security_struct *tsec)
 {
-	struct inode_security_struct *isec;
-	struct common_audit_data ad;
-	u32 sid;
-	int err = 0;
+	return tsec->sockcreate_sid ? : tsec->sid;
+}
 
-	isec = SOCK_INODE(sock)->i_security;
+static int sock_has_perm(struct task_struct *task, struct sock *sk, u32 perms)
+{
+	struct sk_security_struct *sksec = sk->sk_security;
+	struct common_audit_data ad;
+	u32 tsid = task_sid(task);
 
-	if (isec->sid == SECINITSID_KERNEL)
-		goto out;
-	sid = task_sid(task);
+	if (sksec->sid == SECINITSID_KERNEL)
+		return 0;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
-	ad.u.net.sk = sock->sk;
-	err = avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
+	ad.u.net.sk = sk;
 
-out:
-	return err;
+	return avc_has_perm(tsid, sksec->sid, sksec->sclass, perms, &ad);
 }
 
 static int selinux_socket_create(int family, int type,
 				 int protocol, int kern)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
-	u32 sid, newsid;
+	const struct task_security_struct *tsec = current_security();
+	u32 newsid;
 	u16 secclass;
-	int err = 0;
 
 	if (kern)
-		goto out;
-
-	sid = tsec->sid;
-	newsid = tsec->sockcreate_sid ?: sid;
+		return 0;
 
+	newsid = socket_sockcreate_sid(tsec);
 	secclass = socket_type_to_security_class(family, type, protocol);
-	err = avc_has_perm(sid, newsid, secclass, SOCKET__CREATE, NULL);
-
-out:
-	return err;
+	return avc_has_perm(tsec->sid, newsid, secclass, SOCKET__CREATE, NULL);
 }
 
 static int selinux_socket_post_create(struct socket *sock, int family,
 				      int type, int protocol, int kern)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
-	struct inode_security_struct *isec;
+	const struct task_security_struct *tsec = current_security();
+	struct inode_security_struct *isec = SOCK_INODE(sock)->i_security;
 	struct sk_security_struct *sksec;
-	u32 sid, newsid;
 	int err = 0;
 
-	sid = tsec->sid;
-	newsid = tsec->sockcreate_sid;
-
-	isec = SOCK_INODE(sock)->i_security;
-
 	if (kern)
 		isec->sid = SECINITSID_KERNEL;
-	else if (newsid)
-		isec->sid = newsid;
 	else
-		isec->sid = sid;
+		isec->sid = socket_sockcreate_sid(tsec);
 
 	isec->sclass = socket_type_to_security_class(family, type, protocol);
 	isec->initialized = 1;
@@ -3756,10 +3701,11 @@ static int selinux_socket_post_create(struct socket *sock, int family,
 
 static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, int addrlen)
 {
+	struct sock *sk = sock->sk;
 	u16 family;
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__BIND);
+	err = sock_has_perm(current, sk, SOCKET__BIND);
 	if (err)
 		goto out;
 
@@ -3768,19 +3714,16 @@ static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, in
 	 * Multiple address binding for SCTP is not supported yet: we just
 	 * check the first address now.
 	 */
-	family = sock->sk->sk_family;
+	family = sk->sk_family;
 	if (family == PF_INET || family == PF_INET6) {
 		char *addrp;
-		struct inode_security_struct *isec;
+		struct sk_security_struct *sksec = sk->sk_security;
 		struct common_audit_data ad;
 		struct sockaddr_in *addr4 = NULL;
 		struct sockaddr_in6 *addr6 = NULL;
 		unsigned short snum;
-		struct sock *sk = sock->sk;
 		u32 sid, node_perm;
 
-		isec = SOCK_INODE(sock)->i_security;
-
 		if (family == PF_INET) {
 			addr4 = (struct sockaddr_in *)address;
 			snum = ntohs(addr4->sin_port);
@@ -3804,15 +3747,15 @@ static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, in
 				COMMON_AUDIT_DATA_INIT(&ad, NET);
 				ad.u.net.sport = htons(snum);
 				ad.u.net.family = family;
-				err = avc_has_perm(isec->sid, sid,
-						   isec->sclass,
+				err = avc_has_perm(sksec->sid, sid,
+						   sksec->sclass,
 						   SOCKET__NAME_BIND, &ad);
 				if (err)
 					goto out;
 			}
 		}
 
-		switch (isec->sclass) {
+		switch (sksec->sclass) {
 		case SECCLASS_TCP_SOCKET:
 			node_perm = TCP_SOCKET__NODE_BIND;
 			break;
@@ -3843,8 +3786,8 @@ static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, in
 		else
 			ipv6_addr_copy(&ad.u.net.v6info.saddr, &addr6->sin6_addr);
 
-		err = avc_has_perm(isec->sid, sid,
-				   isec->sclass, node_perm, &ad);
+		err = avc_has_perm(sksec->sid, sid,
+				   sksec->sclass, node_perm, &ad);
 		if (err)
 			goto out;
 	}
@@ -3855,19 +3798,18 @@ out:
 static int selinux_socket_connect(struct socket *sock, struct sockaddr *address, int addrlen)
 {
 	struct sock *sk = sock->sk;
-	struct inode_security_struct *isec;
+	struct sk_security_struct *sksec = sk->sk_security;
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__CONNECT);
+	err = sock_has_perm(current, sk, SOCKET__CONNECT);
 	if (err)
 		return err;
 
 	/*
 	 * If a TCP or DCCP socket, check name_connect permission for the port.
 	 */
-	isec = SOCK_INODE(sock)->i_security;
-	if (isec->sclass == SECCLASS_TCP_SOCKET ||
-	    isec->sclass == SECCLASS_DCCP_SOCKET) {
+	if (sksec->sclass == SECCLASS_TCP_SOCKET ||
+	    sksec->sclass == SECCLASS_DCCP_SOCKET) {
 		struct common_audit_data ad;
 		struct sockaddr_in *addr4 = NULL;
 		struct sockaddr_in6 *addr6 = NULL;
@@ -3890,13 +3832,13 @@ static int selinux_socket_connect(struct socket *sock, struct sockaddr *address,
 		if (err)
 			goto out;
 
-		perm = (isec->sclass == SECCLASS_TCP_SOCKET) ?
+		perm = (sksec->sclass == SECCLASS_TCP_SOCKET) ?
 		       TCP_SOCKET__NAME_CONNECT : DCCP_SOCKET__NAME_CONNECT;
 
 		COMMON_AUDIT_DATA_INIT(&ad, NET);
 		ad.u.net.dport = htons(snum);
 		ad.u.net.family = sk->sk_family;
-		err = avc_has_perm(isec->sid, sid, isec->sclass, perm, &ad);
+		err = avc_has_perm(sksec->sid, sid, sksec->sclass, perm, &ad);
 		if (err)
 			goto out;
 	}
@@ -3909,7 +3851,7 @@ out:
 
 static int selinux_socket_listen(struct socket *sock, int backlog)
 {
-	return socket_has_perm(current, sock, SOCKET__LISTEN);
+	return sock_has_perm(current, sock->sk, SOCKET__LISTEN);
 }
 
 static int selinux_socket_accept(struct socket *sock, struct socket *newsock)
@@ -3918,7 +3860,7 @@ static int selinux_socket_accept(struct socket *sock, struct socket *newsock)
 	struct inode_security_struct *isec;
 	struct inode_security_struct *newisec;
 
-	err = socket_has_perm(current, sock, SOCKET__ACCEPT);
+	err = sock_has_perm(current, sock->sk, SOCKET__ACCEPT);
 	if (err)
 		return err;
 
@@ -3935,30 +3877,30 @@ static int selinux_socket_accept(struct socket *sock, struct socket *newsock)
 static int selinux_socket_sendmsg(struct socket *sock, struct msghdr *msg,
 				  int size)
 {
-	return socket_has_perm(current, sock, SOCKET__WRITE);
+	return sock_has_perm(current, sock->sk, SOCKET__WRITE);
 }
 
 static int selinux_socket_recvmsg(struct socket *sock, struct msghdr *msg,
 				  int size, int flags)
 {
-	return socket_has_perm(current, sock, SOCKET__READ);
+	return sock_has_perm(current, sock->sk, SOCKET__READ);
 }
 
 static int selinux_socket_getsockname(struct socket *sock)
 {
-	return socket_has_perm(current, sock, SOCKET__GETATTR);
+	return sock_has_perm(current, sock->sk, SOCKET__GETATTR);
 }
 
 static int selinux_socket_getpeername(struct socket *sock)
 {
-	return socket_has_perm(current, sock, SOCKET__GETATTR);
+	return sock_has_perm(current, sock->sk, SOCKET__GETATTR);
 }
 
 static int selinux_socket_setsockopt(struct socket *sock, int level, int optname)
 {
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__SETOPT);
+	err = sock_has_perm(current, sock->sk, SOCKET__SETOPT);
 	if (err)
 		return err;
 
@@ -3968,68 +3910,58 @@ static int selinux_socket_setsockopt(struct socket *sock, int level, int optname
 static int selinux_socket_getsockopt(struct socket *sock, int level,
 				     int optname)
 {
-	return socket_has_perm(current, sock, SOCKET__GETOPT);
+	return sock_has_perm(current, sock->sk, SOCKET__GETOPT);
 }
 
 static int selinux_socket_shutdown(struct socket *sock, int how)
 {
-	return socket_has_perm(current, sock, SOCKET__SHUTDOWN);
+	return sock_has_perm(current, sock->sk, SOCKET__SHUTDOWN);
 }
 
 static int selinux_socket_unix_stream_connect(struct socket *sock,
 					      struct socket *other,
 					      struct sock *newsk)
 {
-	struct sk_security_struct *sksec;
-	struct inode_security_struct *isec;
-	struct inode_security_struct *other_isec;
+	struct sk_security_struct *sksec_sock = sock->sk->sk_security;
+	struct sk_security_struct *sksec_other = other->sk->sk_security;
+	struct sk_security_struct *sksec_new = newsk->sk_security;
 	struct common_audit_data ad;
 	int err;
 
-	isec = SOCK_INODE(sock)->i_security;
-	other_isec = SOCK_INODE(other)->i_security;
-
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
 	ad.u.net.sk = other->sk;
 
-	err = avc_has_perm(isec->sid, other_isec->sid,
-			   isec->sclass,
+	err = avc_has_perm(sksec_sock->sid, sksec_other->sid,
+			   sksec_other->sclass,
 			   UNIX_STREAM_SOCKET__CONNECTTO, &ad);
 	if (err)
 		return err;
 
-	/* connecting socket */
-	sksec = sock->sk->sk_security;
-	sksec->peer_sid = other_isec->sid;
-
 	/* server child socket */
-	sksec = newsk->sk_security;
-	sksec->peer_sid = isec->sid;
-	err = security_sid_mls_copy(other_isec->sid, sksec->peer_sid, &sksec->sid);
+	sksec_new->peer_sid = sksec_sock->sid;
+	err = security_sid_mls_copy(sksec_other->sid, sksec_sock->sid,
+				    &sksec_new->sid);
+	if (err)
+		return err;
 
-	return err;
+	/* connecting socket */
+	sksec_sock->peer_sid = sksec_new->sid;
+
+	return 0;
 }
 
 static int selinux_socket_unix_may_send(struct socket *sock,
 					struct socket *other)
 {
-	struct inode_security_struct *isec;
-	struct inode_security_struct *other_isec;
+	struct sk_security_struct *ssec = sock->sk->sk_security;
+	struct sk_security_struct *osec = other->sk->sk_security;
 	struct common_audit_data ad;
-	int err;
-
-	isec = SOCK_INODE(sock)->i_security;
-	other_isec = SOCK_INODE(other)->i_security;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
 	ad.u.net.sk = other->sk;
 
-	err = avc_has_perm(isec->sid, other_isec->sid,
-			   isec->sclass, SOCKET__SENDTO, &ad);
-	if (err)
-		return err;
-
-	return 0;
+	return avc_has_perm(ssec->sid, osec->sid, osec->sclass, SOCKET__SENDTO,
+			    &ad);
 }
 
 static int selinux_inet_sys_rcv_skb(int ifindex, char *addrp, u16 family,
@@ -4168,26 +4100,18 @@ static int selinux_socket_getpeersec_stream(struct socket *sock, char __user *op
 	int err = 0;
 	char *scontext;
 	u32 scontext_len;
-	struct sk_security_struct *sksec;
-	struct inode_security_struct *isec;
+	struct sk_security_struct *sksec = sock->sk->sk_security;
 	u32 peer_sid = SECSID_NULL;
 
-	isec = SOCK_INODE(sock)->i_security;
-
-	if (isec->sclass == SECCLASS_UNIX_STREAM_SOCKET ||
-	    isec->sclass == SECCLASS_TCP_SOCKET) {
-		sksec = sock->sk->sk_security;
+	if (sksec->sclass == SECCLASS_UNIX_STREAM_SOCKET ||
+	    sksec->sclass == SECCLASS_TCP_SOCKET)
 		peer_sid = sksec->peer_sid;
-	}
-	if (peer_sid == SECSID_NULL) {
-		err = -ENOPROTOOPT;
-		goto out;
-	}
+	if (peer_sid == SECSID_NULL)
+		return -ENOPROTOOPT;
 
 	err = security_sid_to_context(peer_sid, &scontext, &scontext_len);
-
 	if (err)
-		goto out;
+		return err;
 
 	if (scontext_len > len) {
 		err = -ERANGE;
@@ -4200,9 +4124,7 @@ static int selinux_socket_getpeersec_stream(struct socket *sock, char __user *op
 out_len:
 	if (put_user(scontext_len, optlen))
 		err = -EFAULT;
-
 	kfree(scontext);
-out:
 	return err;
 }
 
@@ -4234,12 +4156,27 @@ out:
 
 static int selinux_sk_alloc_security(struct sock *sk, int family, gfp_t priority)
 {
-	return sk_alloc_security(sk, family, priority);
+	struct sk_security_struct *sksec;
+
+	sksec = kzalloc(sizeof(*sksec), priority);
+	if (!sksec)
+		return -ENOMEM;
+
+	sksec->peer_sid = SECINITSID_UNLABELED;
+	sksec->sid = SECINITSID_UNLABELED;
+	selinux_netlbl_sk_security_reset(sksec);
+	sk->sk_security = sksec;
+
+	return 0;
 }
 
 static void selinux_sk_free_security(struct sock *sk)
 {
-	sk_free_security(sk);
+	struct sk_security_struct *sksec = sk->sk_security;
+
+	sk->sk_security = NULL;
+	selinux_netlbl_sk_security_free(sksec);
+	kfree(sksec);
 }
 
 static void selinux_sk_clone_security(const struct sock *sk, struct sock *newsk)
@@ -4399,8 +4336,7 @@ static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
 	int err = 0;
 	u32 perm;
 	struct nlmsghdr *nlh;
-	struct socket *sock = sk->sk_socket;
-	struct inode_security_struct *isec = SOCK_INODE(sock)->i_security;
+	struct sk_security_struct *sksec = sk->sk_security;
 
 	if (skb->len < NLMSG_SPACE(0)) {
 		err = -EINVAL;
@@ -4408,13 +4344,13 @@ static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
 	}
 	nlh = nlmsg_hdr(skb);
 
-	err = selinux_nlmsg_lookup(isec->sclass, nlh->nlmsg_type, &perm);
+	err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
 	if (err) {
 		if (err == -EINVAL) {
 			audit_log(current->audit_context, GFP_KERNEL, AUDIT_SELINUX_ERR,
 				  "SELinux:  unrecognized netlink message"
 				  " type=%hu for sclass=%hu\n",
-				  nlh->nlmsg_type, isec->sclass);
+				  nlh->nlmsg_type, sksec->sclass);
 			if (!selinux_enforcing || security_get_allow_unknown())
 				err = 0;
 		}
@@ -4425,7 +4361,7 @@ static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
 		goto out;
 	}
 
-	err = socket_has_perm(current, sock, perm);
+	err = sock_has_perm(current, sk, perm);
 out:
 	return err;
 }
diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h
index 8b32e959bb2..b4c9eb4bd6f 100644
--- a/security/selinux/include/classmap.h
+++ b/security/selinux/include/classmap.h
@@ -2,7 +2,8 @@
     "getattr", "setattr", "lock", "relabelfrom", "relabelto", "append"
 
 #define COMMON_FILE_PERMS COMMON_FILE_SOCK_PERMS, "unlink", "link", \
-    "rename", "execute", "swapon", "quotaon", "mounton"
+    "rename", "execute", "swapon", "quotaon", "mounton", "audit_access", \
+    "open", "execmod"
 
 #define COMMON_SOCK_PERMS COMMON_FILE_SOCK_PERMS, "bind", "connect", \
     "listen", "accept", "getopt", "setopt", "shutdown", "recvfrom",  \
@@ -43,22 +44,21 @@ struct security_class_mapping secclass_map[] = {
 	    "quotaget", NULL } },
 	{ "file",
 	  { COMMON_FILE_PERMS,
-	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	    "execute_no_trans", "entrypoint", NULL } },
 	{ "dir",
 	  { COMMON_FILE_PERMS, "add_name", "remove_name",
-	    "reparent", "search", "rmdir", "open", NULL } },
+	    "reparent", "search", "rmdir", NULL } },
 	{ "fd", { "use", NULL } },
 	{ "lnk_file",
 	  { COMMON_FILE_PERMS, NULL } },
 	{ "chr_file",
-	  { COMMON_FILE_PERMS,
-	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "blk_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "sock_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "fifo_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "socket",
 	  { COMMON_SOCK_PERMS, NULL } },
 	{ "tcp_socket",
diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c
index dc92792271f..65ebfe954f8 100644
--- a/security/selinux/netnode.c
+++ b/security/selinux/netnode.c
@@ -183,8 +183,6 @@ static void sel_netnode_insert(struct sel_netnode *node)
 		BUG();
 	}
 
-	INIT_RCU_HEAD(&node->rcu);
-
 	/* we need to impose a limit on the growth of the hash table so check
 	 * this bucket to make sure it is within the specified bounds */
 	list_add_rcu(&node->list, &sel_netnode_hash[idx].list);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 0293843f7ed..79a1bb63566 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -184,6 +184,7 @@ out:
 static const struct file_operations sel_enforce_ops = {
 	.read		= sel_read_enforce,
 	.write		= sel_write_enforce,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_handle_unknown(struct file *filp, char __user *buf,
@@ -201,6 +202,7 @@ static ssize_t sel_read_handle_unknown(struct file *filp, char __user *buf,
 
 static const struct file_operations sel_handle_unknown_ops = {
 	.read		= sel_read_handle_unknown,
+	.llseek		= generic_file_llseek,
 };
 
 #ifdef CONFIG_SECURITY_SELINUX_DISABLE
@@ -251,6 +253,7 @@ out:
 
 static const struct file_operations sel_disable_ops = {
 	.write		= sel_write_disable,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_policyvers(struct file *filp, char __user *buf,
@@ -265,6 +268,7 @@ static ssize_t sel_read_policyvers(struct file *filp, char __user *buf,
 
 static const struct file_operations sel_policyvers_ops = {
 	.read		= sel_read_policyvers,
+	.llseek		= generic_file_llseek,
 };
 
 /* declaration for sel_write_load */
@@ -289,6 +293,7 @@ static ssize_t sel_read_mls(struct file *filp, char __user *buf,
 
 static const struct file_operations sel_mls_ops = {
 	.read		= sel_read_mls,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_write_load(struct file *file, const char __user *buf,
@@ -356,6 +361,7 @@ out:
 
 static const struct file_operations sel_load_ops = {
 	.write		= sel_write_load,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_write_context(struct file *file, char *buf, size_t size)
@@ -437,6 +443,7 @@ out:
 static const struct file_operations sel_checkreqprot_ops = {
 	.read		= sel_read_checkreqprot,
 	.write		= sel_write_checkreqprot,
+	.llseek		= generic_file_llseek,
 };
 
 /*
@@ -482,6 +489,7 @@ static const struct file_operations transaction_ops = {
 	.write		= selinux_transaction_write,
 	.read		= simple_transaction_read,
 	.release	= simple_transaction_release,
+	.llseek		= generic_file_llseek,
 };
 
 /*
@@ -883,6 +891,7 @@ out:
 static const struct file_operations sel_bool_ops = {
 	.read		= sel_read_bool,
 	.write		= sel_write_bool,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_commit_bools_write(struct file *filep,
@@ -935,6 +944,7 @@ out:
 
 static const struct file_operations sel_commit_bools_ops = {
 	.write		= sel_commit_bools_write,
+	.llseek		= generic_file_llseek,
 };
 
 static void sel_remove_entries(struct dentry *de)
@@ -1127,10 +1137,12 @@ out:
 static const struct file_operations sel_avc_cache_threshold_ops = {
 	.read		= sel_read_avc_cache_threshold,
 	.write		= sel_write_avc_cache_threshold,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations sel_avc_hash_stats_ops = {
 	.read		= sel_read_avc_hash_stats,
+	.llseek		= generic_file_llseek,
 };
 
 #ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
@@ -1255,6 +1267,7 @@ static ssize_t sel_read_initcon(struct file *file, char __user *buf,
 
 static const struct file_operations sel_initcon_ops = {
 	.read		= sel_read_initcon,
+	.llseek		= generic_file_llseek,
 };
 
 static int sel_make_initcon_files(struct dentry *dir)
@@ -1330,6 +1343,7 @@ out:
 
 static const struct file_operations sel_class_ops = {
 	.read		= sel_read_class,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_perm(struct file *file, char __user *buf,
@@ -1354,6 +1368,7 @@ out:
 
 static const struct file_operations sel_perm_ops = {
 	.read		= sel_read_perm,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_policycap(struct file *file, char __user *buf,
@@ -1372,6 +1387,7 @@ static ssize_t sel_read_policycap(struct file *file, char __user *buf,
 
 static const struct file_operations sel_policycap_ops = {
 	.read		= sel_read_policycap,
+	.llseek		= generic_file_llseek,
 };
 
 static int sel_make_perm_files(char *objclass, int classvalue,
diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c
index 1215b8e47db..929480c6c43 100644
--- a/security/selinux/ss/avtab.c
+++ b/security/selinux/ss/avtab.c
@@ -342,20 +342,20 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 
 	if (vers < POLICYDB_VERSION_AVTAB) {
 		rc = next_entry(buf32, fp, sizeof(u32));
-		if (rc < 0) {
+		if (rc) {
 			printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-			return -1;
+			return rc;
 		}
 		items2 = le32_to_cpu(buf32[0]);
 		if (items2 > ARRAY_SIZE(buf32)) {
 			printk(KERN_ERR "SELinux: avtab: entry overflow\n");
-			return -1;
+			return -EINVAL;
 
 		}
 		rc = next_entry(buf32, fp, sizeof(u32)*items2);
-		if (rc < 0) {
+		if (rc) {
 			printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-			return -1;
+			return rc;
 		}
 		items = 0;
 
@@ -363,19 +363,19 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 		key.source_type = (u16)val;
 		if (key.source_type != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated source type\n");
-			return -1;
+			return -EINVAL;
 		}
 		val = le32_to_cpu(buf32[items++]);
 		key.target_type = (u16)val;
 		if (key.target_type != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated target type\n");
-			return -1;
+			return -EINVAL;
 		}
 		val = le32_to_cpu(buf32[items++]);
 		key.target_class = (u16)val;
 		if (key.target_class != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated target class\n");
-			return -1;
+			return -EINVAL;
 		}
 
 		val = le32_to_cpu(buf32[items++]);
@@ -383,12 +383,12 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 
 		if (!(val & (AVTAB_AV | AVTAB_TYPE))) {
 			printk(KERN_ERR "SELinux: avtab: null entry\n");
-			return -1;
+			return -EINVAL;
 		}
 		if ((val & AVTAB_AV) &&
 		    (val & AVTAB_TYPE)) {
 			printk(KERN_ERR "SELinux: avtab: entry has both access vectors and types\n");
-			return -1;
+			return -EINVAL;
 		}
 
 		for (i = 0; i < ARRAY_SIZE(spec_order); i++) {
@@ -403,15 +403,15 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 
 		if (items != items2) {
 			printk(KERN_ERR "SELinux: avtab: entry only had %d items, expected %d\n", items2, items);
-			return -1;
+			return -EINVAL;
 		}
 		return 0;
 	}
 
 	rc = next_entry(buf16, fp, sizeof(u16)*4);
-	if (rc < 0) {
+	if (rc) {
 		printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-		return -1;
+		return rc;
 	}
 
 	items = 0;
@@ -424,7 +424,7 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 	    !policydb_type_isvalid(pol, key.target_type) ||
 	    !policydb_class_isvalid(pol, key.target_class)) {
 		printk(KERN_ERR "SELinux: avtab: invalid type or class\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	set = 0;
@@ -434,19 +434,19 @@ int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 	}
 	if (!set || set > 1) {
 		printk(KERN_ERR "SELinux:  avtab:  more than one specifier\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	rc = next_entry(buf32, fp, sizeof(u32));
-	if (rc < 0) {
+	if (rc) {
 		printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-		return -1;
+		return rc;
 	}
 	datum.data = le32_to_cpu(*buf32);
 	if ((key.specified & AVTAB_TYPE) &&
 	    !policydb_type_isvalid(pol, datum.data)) {
 		printk(KERN_ERR "SELinux: avtab: invalid type\n");
-		return -1;
+		return -EINVAL;
 	}
 	return insertf(a, &key, &datum, p);
 }
@@ -487,8 +487,7 @@ int avtab_read(struct avtab *a, void *fp, struct policydb *pol)
 				printk(KERN_ERR "SELinux: avtab: out of memory\n");
 			else if (rc == -EEXIST)
 				printk(KERN_ERR "SELinux: avtab: duplicate entry\n");
-			else
-				rc = -EINVAL;
+
 			goto bad;
 		}
 	}
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 4a4e35cac22..c91e150c308 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -117,10 +117,14 @@ int evaluate_cond_node(struct policydb *p, struct cond_node *node)
 
 int cond_policydb_init(struct policydb *p)
 {
+	int rc;
+
 	p->bool_val_to_struct = NULL;
 	p->cond_list = NULL;
-	if (avtab_init(&p->te_cond_avtab))
-		return -1;
+
+	rc = avtab_init(&p->te_cond_avtab);
+	if (rc)
+		return rc;
 
 	return 0;
 }
@@ -219,34 +223,37 @@ int cond_read_bool(struct policydb *p, struct hashtab *h, void *fp)
 
 	booldatum = kzalloc(sizeof(struct cond_bool_datum), GFP_KERNEL);
 	if (!booldatum)
-		return -1;
+		return -ENOMEM;
 
 	rc = next_entry(buf, fp, sizeof buf);
-	if (rc < 0)
+	if (rc)
 		goto err;
 
 	booldatum->value = le32_to_cpu(buf[0]);
 	booldatum->state = le32_to_cpu(buf[1]);
 
+	rc = -EINVAL;
 	if (!bool_isvalid(booldatum))
 		goto err;
 
 	len = le32_to_cpu(buf[2]);
 
+	rc = -ENOMEM;
 	key = kmalloc(len + 1, GFP_KERNEL);
 	if (!key)
 		goto err;
 	rc = next_entry(key, fp, len);
-	if (rc < 0)
+	if (rc)
 		goto err;
 	key[len] = '\0';
-	if (hashtab_insert(h, key, booldatum))
+	rc = hashtab_insert(h, key, booldatum);
+	if (rc)
 		goto err;
 
 	return 0;
 err:
 	cond_destroy_bool(key, booldatum, NULL);
-	return -1;
+	return rc;
 }
 
 struct cond_insertf_data {
@@ -263,7 +270,7 @@ static int cond_insertf(struct avtab *a, struct avtab_key *k, struct avtab_datum
 	struct cond_av_list *other = data->other, *list, *cur;
 	struct avtab_node *node_ptr;
 	u8 found;
-
+	int rc = -EINVAL;
 
 	/*
 	 * For type rules we have to make certain there aren't any
@@ -313,12 +320,15 @@ static int cond_insertf(struct avtab *a, struct avtab_key *k, struct avtab_datum
 	node_ptr = avtab_insert_nonunique(&p->te_cond_avtab, k, d);
 	if (!node_ptr) {
 		printk(KERN_ERR "SELinux: could not insert rule.\n");
+		rc = -ENOMEM;
 		goto err;
 	}
 
 	list = kzalloc(sizeof(struct cond_av_list), GFP_KERNEL);
-	if (!list)
+	if (!list) {
+		rc = -ENOMEM;
 		goto err;
+	}
 
 	list->node = node_ptr;
 	if (!data->head)
@@ -331,7 +341,7 @@ static int cond_insertf(struct avtab *a, struct avtab_key *k, struct avtab_datum
 err:
 	cond_av_list_destroy(data->head);
 	data->head = NULL;
-	return -1;
+	return rc;
 }
 
 static int cond_read_av_list(struct policydb *p, void *fp, struct cond_av_list **ret_list, struct cond_av_list *other)
@@ -345,8 +355,8 @@ static int cond_read_av_list(struct policydb *p, void *fp, struct cond_av_list *
 
 	len = 0;
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	len = le32_to_cpu(buf[0]);
 	if (len == 0)
@@ -361,7 +371,6 @@ static int cond_read_av_list(struct policydb *p, void *fp, struct cond_av_list *
 				     &data);
 		if (rc)
 			return rc;
-
 	}
 
 	*ret_list = data.head;
@@ -390,24 +399,25 @@ static int cond_read_node(struct policydb *p, struct cond_node *node, void *fp)
 	struct cond_expr *expr = NULL, *last = NULL;
 
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	node->cur_state = le32_to_cpu(buf[0]);
 
 	len = 0;
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	/* expr */
 	len = le32_to_cpu(buf[0]);
 
 	for (i = 0; i < len; i++) {
 		rc = next_entry(buf, fp, sizeof(u32) * 2);
-		if (rc < 0)
+		if (rc)
 			goto err;
 
+		rc = -ENOMEM;
 		expr = kzalloc(sizeof(struct cond_expr), GFP_KERNEL);
 		if (!expr)
 			goto err;
@@ -416,6 +426,7 @@ static int cond_read_node(struct policydb *p, struct cond_node *node, void *fp)
 		expr->bool = le32_to_cpu(buf[1]);
 
 		if (!expr_isvalid(p, expr)) {
+			rc = -EINVAL;
 			kfree(expr);
 			goto err;
 		}
@@ -427,14 +438,16 @@ static int cond_read_node(struct policydb *p, struct cond_node *node, void *fp)
 		last = expr;
 	}
 
-	if (cond_read_av_list(p, fp, &node->true_list, NULL) != 0)
+	rc = cond_read_av_list(p, fp, &node->true_list, NULL);
+	if (rc)
 		goto err;
-	if (cond_read_av_list(p, fp, &node->false_list, node->true_list) != 0)
+	rc = cond_read_av_list(p, fp, &node->false_list, node->true_list);
+	if (rc)
 		goto err;
 	return 0;
 err:
 	cond_node_destroy(node);
-	return -1;
+	return rc;
 }
 
 int cond_read_list(struct policydb *p, void *fp)
@@ -445,8 +458,8 @@ int cond_read_list(struct policydb *p, void *fp)
 	int rc;
 
 	rc = next_entry(buf, fp, sizeof buf);
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	len = le32_to_cpu(buf[0]);
 
@@ -455,11 +468,13 @@ int cond_read_list(struct policydb *p, void *fp)
 		goto err;
 
 	for (i = 0; i < len; i++) {
+		rc = -ENOMEM;
 		node = kzalloc(sizeof(struct cond_node), GFP_KERNEL);
 		if (!node)
 			goto err;
 
-		if (cond_read_node(p, node, fp) != 0)
+		rc = cond_read_node(p, node, fp);
+		if (rc)
 			goto err;
 
 		if (i == 0)
@@ -472,7 +487,7 @@ int cond_read_list(struct policydb *p, void *fp)
 err:
 	cond_list_destroy(p->cond_list);
 	p->cond_list = NULL;
-	return -1;
+	return rc;
 }
 
 /* Determine whether additional permissions are granted by the conditional
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index c57802a164d..3a29704be8c 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -31,6 +31,7 @@
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/audit.h>
+#include <linux/flex_array.h>
 #include "security.h"
 
 #include "policydb.h"
@@ -655,6 +656,9 @@ static int range_tr_destroy(void *key, void *datum, void *p)
 
 static void ocontext_destroy(struct ocontext *c, int i)
 {
+	if (!c)
+		return;
+
 	context_destroy(&c->context[0]);
 	context_destroy(&c->context[1]);
 	if (i == OCON_ISID || i == OCON_FS ||
@@ -736,11 +740,17 @@ void policydb_destroy(struct policydb *p)
 	hashtab_map(p->range_tr, range_tr_destroy, NULL);
 	hashtab_destroy(p->range_tr);
 
-	if (p->type_attr_map) {
-		for (i = 0; i < p->p_types.nprim; i++)
-			ebitmap_destroy(&p->type_attr_map[i]);
+	if (p->type_attr_map_array) {
+		for (i = 0; i < p->p_types.nprim; i++) {
+			struct ebitmap *e;
+
+			e = flex_array_get(p->type_attr_map_array, i);
+			if (!e)
+				continue;
+			ebitmap_destroy(e);
+		}
+		flex_array_free(p->type_attr_map_array);
 	}
-	kfree(p->type_attr_map);
 	ebitmap_destroy(&p->policycaps);
 	ebitmap_destroy(&p->permissive_map);
 
@@ -1701,6 +1711,333 @@ u32 string_to_av_perm(struct policydb *p, u16 tclass, const char *name)
 	return 1U << (perdatum->value-1);
 }
 
+static int range_read(struct policydb *p, void *fp)
+{
+	struct range_trans *rt = NULL;
+	struct mls_range *r = NULL;
+	int i, rc;
+	__le32 buf[2];
+	u32 nel;
+
+	if (p->policyvers < POLICYDB_VERSION_MLS)
+		return 0;
+
+	rc = next_entry(buf, fp, sizeof(u32));
+	if (rc)
+		goto out;
+
+	nel = le32_to_cpu(buf[0]);
+	for (i = 0; i < nel; i++) {
+		rc = -ENOMEM;
+		rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+		if (!rt)
+			goto out;
+
+		rc = next_entry(buf, fp, (sizeof(u32) * 2));
+		if (rc)
+			goto out;
+
+		rt->source_type = le32_to_cpu(buf[0]);
+		rt->target_type = le32_to_cpu(buf[1]);
+		if (p->policyvers >= POLICYDB_VERSION_RANGETRANS) {
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+			rt->target_class = le32_to_cpu(buf[0]);
+		} else
+			rt->target_class = p->process_class;
+
+		rc = -EINVAL;
+		if (!policydb_type_isvalid(p, rt->source_type) ||
+		    !policydb_type_isvalid(p, rt->target_type) ||
+		    !policydb_class_isvalid(p, rt->target_class))
+			goto out;
+
+		rc = -ENOMEM;
+		r = kzalloc(sizeof(*r), GFP_KERNEL);
+		if (!r)
+			goto out;
+
+		rc = mls_read_range_helper(r, fp);
+		if (rc)
+			goto out;
+
+		rc = -EINVAL;
+		if (!mls_range_isvalid(p, r)) {
+			printk(KERN_WARNING "SELinux:  rangetrans:  invalid range\n");
+			goto out;
+		}
+
+		rc = hashtab_insert(p->range_tr, rt, r);
+		if (rc)
+			goto out;
+
+		rt = NULL;
+		r = NULL;
+	}
+	rangetr_hash_eval(p->range_tr);
+	rc = 0;
+out:
+	kfree(rt);
+	kfree(r);
+	return rc;
+}
+
+static int genfs_read(struct policydb *p, void *fp)
+{
+	int i, j, rc;
+	u32 nel, nel2, len, len2;
+	__le32 buf[1];
+	struct ocontext *l, *c;
+	struct ocontext *newc = NULL;
+	struct genfs *genfs_p, *genfs;
+	struct genfs *newgenfs = NULL;
+
+	rc = next_entry(buf, fp, sizeof(u32));
+	if (rc)
+		goto out;
+	nel = le32_to_cpu(buf[0]);
+
+	for (i = 0; i < nel; i++) {
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+		len = le32_to_cpu(buf[0]);
+
+		rc = -ENOMEM;
+		newgenfs = kzalloc(sizeof(*newgenfs), GFP_KERNEL);
+		if (!newgenfs)
+			goto out;
+
+		rc = -ENOMEM;
+		newgenfs->fstype = kmalloc(len + 1, GFP_KERNEL);
+		if (!newgenfs->fstype)
+			goto out;
+
+		rc = next_entry(newgenfs->fstype, fp, len);
+		if (rc)
+			goto out;
+
+		newgenfs->fstype[len] = 0;
+
+		for (genfs_p = NULL, genfs = p->genfs; genfs;
+		     genfs_p = genfs, genfs = genfs->next) {
+			rc = -EINVAL;
+			if (strcmp(newgenfs->fstype, genfs->fstype) == 0) {
+				printk(KERN_ERR "SELinux:  dup genfs fstype %s\n",
+				       newgenfs->fstype);
+				goto out;
+			}
+			if (strcmp(newgenfs->fstype, genfs->fstype) < 0)
+				break;
+		}
+		newgenfs->next = genfs;
+		if (genfs_p)
+			genfs_p->next = newgenfs;
+		else
+			p->genfs = newgenfs;
+		genfs = newgenfs;
+		newgenfs = NULL;
+
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+
+		nel2 = le32_to_cpu(buf[0]);
+		for (j = 0; j < nel2; j++) {
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+			len = le32_to_cpu(buf[0]);
+
+			rc = -ENOMEM;
+			newc = kzalloc(sizeof(*newc), GFP_KERNEL);
+			if (!newc)
+				goto out;
+
+			rc = -ENOMEM;
+			newc->u.name = kmalloc(len + 1, GFP_KERNEL);
+			if (!newc->u.name)
+				goto out;
+
+			rc = next_entry(newc->u.name, fp, len);
+			if (rc)
+				goto out;
+			newc->u.name[len] = 0;
+
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+
+			newc->v.sclass = le32_to_cpu(buf[0]);
+			rc = context_read_and_validate(&newc->context[0], p, fp);
+			if (rc)
+				goto out;
+
+			for (l = NULL, c = genfs->head; c;
+			     l = c, c = c->next) {
+				rc = -EINVAL;
+				if (!strcmp(newc->u.name, c->u.name) &&
+				    (!c->v.sclass || !newc->v.sclass ||
+				     newc->v.sclass == c->v.sclass)) {
+					printk(KERN_ERR "SELinux:  dup genfs entry (%s,%s)\n",
+					       genfs->fstype, c->u.name);
+					goto out;
+				}
+				len = strlen(newc->u.name);
+				len2 = strlen(c->u.name);
+				if (len > len2)
+					break;
+			}
+
+			newc->next = c;
+			if (l)
+				l->next = newc;
+			else
+				genfs->head = newc;
+			newc = NULL;
+		}
+	}
+	rc = 0;
+out:
+	if (newgenfs)
+		kfree(newgenfs->fstype);
+	kfree(newgenfs);
+	ocontext_destroy(newc, OCON_FSUSE);
+
+	return rc;
+}
+
+static int ocontext_read(struct policydb *p, struct policydb_compat_info *info,
+			 void *fp)
+{
+	int i, j, rc;
+	u32 nel, len;
+	__le32 buf[3];
+	struct ocontext *l, *c;
+	u32 nodebuf[8];
+
+	for (i = 0; i < info->ocon_num; i++) {
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+		nel = le32_to_cpu(buf[0]);
+
+		l = NULL;
+		for (j = 0; j < nel; j++) {
+			rc = -ENOMEM;
+			c = kzalloc(sizeof(*c), GFP_KERNEL);
+			if (!c)
+				goto out;
+			if (l)
+				l->next = c;
+			else
+				p->ocontexts[i] = c;
+			l = c;
+
+			switch (i) {
+			case OCON_ISID:
+				rc = next_entry(buf, fp, sizeof(u32));
+				if (rc)
+					goto out;
+
+				c->sid[0] = le32_to_cpu(buf[0]);
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_FS:
+			case OCON_NETIF:
+				rc = next_entry(buf, fp, sizeof(u32));
+				if (rc)
+					goto out;
+				len = le32_to_cpu(buf[0]);
+
+				rc = -ENOMEM;
+				c->u.name = kmalloc(len + 1, GFP_KERNEL);
+				if (!c->u.name)
+					goto out;
+
+				rc = next_entry(c->u.name, fp, len);
+				if (rc)
+					goto out;
+
+				c->u.name[len] = 0;
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				rc = context_read_and_validate(&c->context[1], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_PORT:
+				rc = next_entry(buf, fp, sizeof(u32)*3);
+				if (rc)
+					goto out;
+				c->u.port.protocol = le32_to_cpu(buf[0]);
+				c->u.port.low_port = le32_to_cpu(buf[1]);
+				c->u.port.high_port = le32_to_cpu(buf[2]);
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_NODE:
+				rc = next_entry(nodebuf, fp, sizeof(u32) * 2);
+				if (rc)
+					goto out;
+				c->u.node.addr = nodebuf[0]; /* network order */
+				c->u.node.mask = nodebuf[1]; /* network order */
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_FSUSE:
+				rc = next_entry(buf, fp, sizeof(u32)*2);
+				if (rc)
+					goto out;
+
+				rc = -EINVAL;
+				c->v.behavior = le32_to_cpu(buf[0]);
+				if (c->v.behavior > SECURITY_FS_USE_NONE)
+					goto out;
+
+				rc = -ENOMEM;
+				len = le32_to_cpu(buf[1]);
+				c->u.name = kmalloc(len + 1, GFP_KERNEL);
+				if (!c->u.name)
+					goto out;
+
+				rc = next_entry(c->u.name, fp, len);
+				if (rc)
+					goto out;
+				c->u.name[len] = 0;
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_NODE6: {
+				int k;
+
+				rc = next_entry(nodebuf, fp, sizeof(u32) * 8);
+				if (rc)
+					goto out;
+				for (k = 0; k < 4; k++)
+					c->u.node6.addr[k] = nodebuf[k];
+				for (k = 0; k < 4; k++)
+					c->u.node6.mask[k] = nodebuf[k+4];
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			}
+			}
+		}
+	}
+	rc = 0;
+out:
+	return rc;
+}
+
 /*
  * Read the configuration data from a policy database binary
  * representation file into a policy database structure.
@@ -1709,16 +2046,12 @@ int policydb_read(struct policydb *p, void *fp)
 {
 	struct role_allow *ra, *lra;
 	struct role_trans *tr, *ltr;
-	struct ocontext *l, *c, *newc;
-	struct genfs *genfs_p, *genfs, *newgenfs;
 	int i, j, rc;
 	__le32 buf[4];
-	u32 nodebuf[8];
-	u32 len, len2, nprim, nel, nel2;
+	u32 len, nprim, nel;
+
 	char *policydb_str;
 	struct policydb_compat_info *info;
-	struct range_trans *rt;
-	struct mls_range *r;
 
 	rc = policydb_init(p);
 	if (rc)
@@ -1919,294 +2252,45 @@ int policydb_read(struct policydb *p, void *fp)
 	if (!p->process_trans_perms)
 		goto bad;
 
-	for (i = 0; i < info->ocon_num; i++) {
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel = le32_to_cpu(buf[0]);
-		l = NULL;
-		for (j = 0; j < nel; j++) {
-			c = kzalloc(sizeof(*c), GFP_KERNEL);
-			if (!c) {
-				rc = -ENOMEM;
-				goto bad;
-			}
-			if (l)
-				l->next = c;
-			else
-				p->ocontexts[i] = c;
-			l = c;
-			rc = -EINVAL;
-			switch (i) {
-			case OCON_ISID:
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0)
-					goto bad;
-				c->sid[0] = le32_to_cpu(buf[0]);
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_FS:
-			case OCON_NETIF:
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0)
-					goto bad;
-				len = le32_to_cpu(buf[0]);
-				c->u.name = kmalloc(len + 1, GFP_KERNEL);
-				if (!c->u.name) {
-					rc = -ENOMEM;
-					goto bad;
-				}
-				rc = next_entry(c->u.name, fp, len);
-				if (rc < 0)
-					goto bad;
-				c->u.name[len] = 0;
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				rc = context_read_and_validate(&c->context[1], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_PORT:
-				rc = next_entry(buf, fp, sizeof(u32)*3);
-				if (rc < 0)
-					goto bad;
-				c->u.port.protocol = le32_to_cpu(buf[0]);
-				c->u.port.low_port = le32_to_cpu(buf[1]);
-				c->u.port.high_port = le32_to_cpu(buf[2]);
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_NODE:
-				rc = next_entry(nodebuf, fp, sizeof(u32) * 2);
-				if (rc < 0)
-					goto bad;
-				c->u.node.addr = nodebuf[0]; /* network order */
-				c->u.node.mask = nodebuf[1]; /* network order */
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_FSUSE:
-				rc = next_entry(buf, fp, sizeof(u32)*2);
-				if (rc < 0)
-					goto bad;
-				c->v.behavior = le32_to_cpu(buf[0]);
-				if (c->v.behavior > SECURITY_FS_USE_NONE)
-					goto bad;
-				len = le32_to_cpu(buf[1]);
-				c->u.name = kmalloc(len + 1, GFP_KERNEL);
-				if (!c->u.name) {
-					rc = -ENOMEM;
-					goto bad;
-				}
-				rc = next_entry(c->u.name, fp, len);
-				if (rc < 0)
-					goto bad;
-				c->u.name[len] = 0;
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_NODE6: {
-				int k;
-
-				rc = next_entry(nodebuf, fp, sizeof(u32) * 8);
-				if (rc < 0)
-					goto bad;
-				for (k = 0; k < 4; k++)
-					c->u.node6.addr[k] = nodebuf[k];
-				for (k = 0; k < 4; k++)
-					c->u.node6.mask[k] = nodebuf[k+4];
-				if (context_read_and_validate(&c->context[0], p, fp))
-					goto bad;
-				break;
-			}
-			}
-		}
-	}
-
-	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
+	rc = ocontext_read(p, info, fp);
+	if (rc)
 		goto bad;
-	nel = le32_to_cpu(buf[0]);
-	genfs_p = NULL;
-	rc = -EINVAL;
-	for (i = 0; i < nel; i++) {
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		len = le32_to_cpu(buf[0]);
-		newgenfs = kzalloc(sizeof(*newgenfs), GFP_KERNEL);
-		if (!newgenfs) {
-			rc = -ENOMEM;
-			goto bad;
-		}
 
-		newgenfs->fstype = kmalloc(len + 1, GFP_KERNEL);
-		if (!newgenfs->fstype) {
-			rc = -ENOMEM;
-			kfree(newgenfs);
-			goto bad;
-		}
-		rc = next_entry(newgenfs->fstype, fp, len);
-		if (rc < 0) {
-			kfree(newgenfs->fstype);
-			kfree(newgenfs);
-			goto bad;
-		}
-		newgenfs->fstype[len] = 0;
-		for (genfs_p = NULL, genfs = p->genfs; genfs;
-		     genfs_p = genfs, genfs = genfs->next) {
-			if (strcmp(newgenfs->fstype, genfs->fstype) == 0) {
-				printk(KERN_ERR "SELinux:  dup genfs "
-				       "fstype %s\n", newgenfs->fstype);
-				kfree(newgenfs->fstype);
-				kfree(newgenfs);
-				goto bad;
-			}
-			if (strcmp(newgenfs->fstype, genfs->fstype) < 0)
-				break;
-		}
-		newgenfs->next = genfs;
-		if (genfs_p)
-			genfs_p->next = newgenfs;
-		else
-			p->genfs = newgenfs;
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel2 = le32_to_cpu(buf[0]);
-		for (j = 0; j < nel2; j++) {
-			rc = next_entry(buf, fp, sizeof(u32));
-			if (rc < 0)
-				goto bad;
-			len = le32_to_cpu(buf[0]);
-
-			newc = kzalloc(sizeof(*newc), GFP_KERNEL);
-			if (!newc) {
-				rc = -ENOMEM;
-				goto bad;
-			}
-
-			newc->u.name = kmalloc(len + 1, GFP_KERNEL);
-			if (!newc->u.name) {
-				rc = -ENOMEM;
-				goto bad_newc;
-			}
-			rc = next_entry(newc->u.name, fp, len);
-			if (rc < 0)
-				goto bad_newc;
-			newc->u.name[len] = 0;
-			rc = next_entry(buf, fp, sizeof(u32));
-			if (rc < 0)
-				goto bad_newc;
-			newc->v.sclass = le32_to_cpu(buf[0]);
-			if (context_read_and_validate(&newc->context[0], p, fp))
-				goto bad_newc;
-			for (l = NULL, c = newgenfs->head; c;
-			     l = c, c = c->next) {
-				if (!strcmp(newc->u.name, c->u.name) &&
-				    (!c->v.sclass || !newc->v.sclass ||
-				     newc->v.sclass == c->v.sclass)) {
-					printk(KERN_ERR "SELinux:  dup genfs "
-					       "entry (%s,%s)\n",
-					       newgenfs->fstype, c->u.name);
-					goto bad_newc;
-				}
-				len = strlen(newc->u.name);
-				len2 = strlen(c->u.name);
-				if (len > len2)
-					break;
-			}
+	rc = genfs_read(p, fp);
+	if (rc)
+		goto bad;
 
-			newc->next = c;
-			if (l)
-				l->next = newc;
-			else
-				newgenfs->head = newc;
-		}
-	}
+	rc = range_read(p, fp);
+	if (rc)
+		goto bad;
 
-	if (p->policyvers >= POLICYDB_VERSION_MLS) {
-		int new_rangetr = p->policyvers >= POLICYDB_VERSION_RANGETRANS;
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel = le32_to_cpu(buf[0]);
-		for (i = 0; i < nel; i++) {
-			rt = kzalloc(sizeof(*rt), GFP_KERNEL);
-			if (!rt) {
-				rc = -ENOMEM;
-				goto bad;
-			}
-			rc = next_entry(buf, fp, (sizeof(u32) * 2));
-			if (rc < 0) {
-				kfree(rt);
-				goto bad;
-			}
-			rt->source_type = le32_to_cpu(buf[0]);
-			rt->target_type = le32_to_cpu(buf[1]);
-			if (new_rangetr) {
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0) {
-					kfree(rt);
-					goto bad;
-				}
-				rt->target_class = le32_to_cpu(buf[0]);
-			} else
-				rt->target_class = p->process_class;
-			if (!policydb_type_isvalid(p, rt->source_type) ||
-			    !policydb_type_isvalid(p, rt->target_type) ||
-			    !policydb_class_isvalid(p, rt->target_class)) {
-				kfree(rt);
-				rc = -EINVAL;
-				goto bad;
-			}
-			r = kzalloc(sizeof(*r), GFP_KERNEL);
-			if (!r) {
-				kfree(rt);
-				rc = -ENOMEM;
-				goto bad;
-			}
-			rc = mls_read_range_helper(r, fp);
-			if (rc) {
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-			if (!mls_range_isvalid(p, r)) {
-				printk(KERN_WARNING "SELinux:  rangetrans:  invalid range\n");
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-			rc = hashtab_insert(p->range_tr, rt, r);
-			if (rc) {
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-		}
-		rangetr_hash_eval(p->range_tr);
-	}
+	rc = -ENOMEM;
+	p->type_attr_map_array = flex_array_alloc(sizeof(struct ebitmap),
+						  p->p_types.nprim,
+						  GFP_KERNEL | __GFP_ZERO);
+	if (!p->type_attr_map_array)
+		goto bad;
 
-	p->type_attr_map = kmalloc(p->p_types.nprim * sizeof(struct ebitmap), GFP_KERNEL);
-	if (!p->type_attr_map)
+	/* preallocate so we don't have to worry about the put ever failing */
+	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim - 1,
+				 GFP_KERNEL | __GFP_ZERO);
+	if (rc)
 		goto bad;
 
 	for (i = 0; i < p->p_types.nprim; i++) {
-		ebitmap_init(&p->type_attr_map[i]);
+		struct ebitmap *e = flex_array_get(p->type_attr_map_array, i);
+
+		BUG_ON(!e);
+		ebitmap_init(e);
 		if (p->policyvers >= POLICYDB_VERSION_AVTAB) {
-			if (ebitmap_read(&p->type_attr_map[i], fp))
+			rc = ebitmap_read(e, fp);
+			if (rc)
 				goto bad;
 		}
 		/* add the type itself as the degenerate case */
-		if (ebitmap_set_bit(&p->type_attr_map[i], i, 1))
-				goto bad;
+		rc = ebitmap_set_bit(e, i, 1);
+		if (rc)
+			goto bad;
 	}
 
 	rc = policydb_bounds_sanity_check(p);
@@ -2216,8 +2300,6 @@ int policydb_read(struct policydb *p, void *fp)
 	rc = 0;
 out:
 	return rc;
-bad_newc:
-	ocontext_destroy(newc, OCON_FSUSE);
 bad:
 	if (!rc)
 		rc = -EINVAL;
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 26d9adf8542..310e94442cb 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -24,6 +24,8 @@
 #ifndef _SS_POLICYDB_H_
 #define _SS_POLICYDB_H_
 
+#include <linux/flex_array.h>
+
 #include "symtab.h"
 #include "avtab.h"
 #include "sidtab.h"
@@ -246,7 +248,7 @@ struct policydb {
 	struct hashtab *range_tr;
 
 	/* type -> attribute reverse mapping */
-	struct ebitmap *type_attr_map;
+	struct flex_array *type_attr_map_array;
 
 	struct ebitmap policycaps;
 
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 1de60ce90d9..9ea2feca3cd 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -50,6 +50,7 @@
 #include <linux/audit.h>
 #include <linux/mutex.h>
 #include <linux/selinux.h>
+#include <linux/flex_array.h>
 #include <net/netlabel.h>
 
 #include "flask.h"
@@ -626,8 +627,10 @@ static void context_struct_compute_av(struct context *scontext,
 	 */
 	avkey.target_class = tclass;
 	avkey.specified = AVTAB_AV;
-	sattr = &policydb.type_attr_map[scontext->type - 1];
-	tattr = &policydb.type_attr_map[tcontext->type - 1];
+	sattr = flex_array_get(policydb.type_attr_map_array, scontext->type - 1);
+	BUG_ON(!sattr);
+	tattr = flex_array_get(policydb.type_attr_map_array, tcontext->type - 1);
+	BUG_ON(!tattr);
 	ebitmap_for_each_positive_bit(sattr, snode, i) {
 		ebitmap_for_each_positive_bit(tattr, tnode, j) {
 			avkey.source_type = i + 1;
diff --git a/security/selinux/ss/symtab.c b/security/selinux/ss/symtab.c
index bcf9f620426..160326ee99e 100644
--- a/security/selinux/ss/symtab.c
+++ b/security/selinux/ss/symtab.c
@@ -36,7 +36,7 @@ int symtab_init(struct symtab *s, unsigned int size)
 {
 	s->table = hashtab_create(symhash, symcmp, size);
 	if (!s->table)
-		return -1;
+		return -ENOMEM;
 	s->nprim = 0;
 	return 0;
 }
diff --git a/security/smack/smack.h b/security/smack/smack.h
index c6e9acae72e..43ae747a5aa 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -123,16 +123,6 @@ struct smack_known {
 #define SMK_FSHAT	"smackfshat="
 #define SMK_FSROOT	"smackfsroot="
 
-/*
- * xattr names
- */
-#define XATTR_SMACK_SUFFIX	"SMACK64"
-#define XATTR_SMACK_IPIN	"SMACK64IPIN"
-#define XATTR_SMACK_IPOUT	"SMACK64IPOUT"
-#define XATTR_NAME_SMACK	XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-
 #define SMACK_CIPSO_OPTION 	"-CIPSO"
 
 /*
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0f2fc480fc6..9192ba366a4 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -598,6 +598,8 @@ static int smack_inode_rename(struct inode *old_inode,
 static int smack_inode_permission(struct inode *inode, int mask)
 {
 	struct smk_audit_info ad;
+
+	mask &= (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND);
 	/*
 	 * No permission to check. Existence test. Yup, it's there.
 	 */
@@ -2191,7 +2193,7 @@ static void smack_ipc_getsecid(struct kern_ipc_perm *ipp, u32 *secid)
 
 /**
  * smack_d_instantiate - Make sure the blob is correct on an inode
- * @opt_dentry: unused
+ * @opt_dentry: dentry where inode will be attached
  * @inode: the object
  *
  * Set the inode's security blob if it hasn't been done already.
@@ -2310,20 +2312,10 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode)
 		/*
 		 * Get the dentry for xattr.
 		 */
-		if (opt_dentry == NULL) {
-			dp = d_find_alias(inode);
-			if (dp == NULL)
-				break;
-		} else {
-			dp = dget(opt_dentry);
-			if (dp == NULL)
-				break;
-		}
-
+		dp = dget(opt_dentry);
 		fetched = smk_fetch(inode, dp);
 		if (fetched != NULL)
 			final = fetched;
-
 		dput(dp);
 		break;
 	}
diff --git a/security/tomoyo/Makefile b/security/tomoyo/Makefile
index 4fb39030f6b..91640e96bd0 100644
--- a/security/tomoyo/Makefile
+++ b/security/tomoyo/Makefile
@@ -1 +1 @@
-obj-y = common.o realpath.o tomoyo.o domain.o file.o gc.o path_group.o
+obj-y = common.o domain.o file.o gc.o group.o load_policy.o memory.o mount.o realpath.o securityfs_if.o tomoyo.o util.o
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index b5dbdc9ff73..ef43995119a 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -3,974 +3,424 @@
  *
  * Common functions for TOMOYO.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 #include <linux/security.h>
-#include <linux/hardirq.h>
 #include "common.h"
 
-/* Lock for protecting policy. */
-DEFINE_MUTEX(tomoyo_policy_lock);
+static struct tomoyo_profile tomoyo_default_profile = {
+	.learning = &tomoyo_default_profile.preference,
+	.permissive = &tomoyo_default_profile.preference,
+	.enforcing = &tomoyo_default_profile.preference,
+	.preference.enforcing_verbose = true,
+	.preference.learning_max_entry = 2048,
+	.preference.learning_verbose = false,
+	.preference.permissive_verbose = true
+};
+
+/* Profile version. Currently only 20090903 is defined. */
+static unsigned int tomoyo_profile_version;
 
-/* Has loading policy done? */
-bool tomoyo_policy_loaded;
+/* Profile table. Memory is allocated as needed. */
+static struct tomoyo_profile *tomoyo_profile_ptr[TOMOYO_MAX_PROFILES];
 
 /* String table for functionality that takes 4 modes. */
-static const char *tomoyo_mode_4[4] = {
+static const char *tomoyo_mode[4] = {
 	"disabled", "learning", "permissive", "enforcing"
 };
-/* String table for functionality that takes 2 modes. */
-static const char *tomoyo_mode_2[4] = {
-	"disabled", "enabled", "enabled", "enabled"
-};
 
-/*
- * tomoyo_control_array is a static data which contains
- *
- *  (1) functionality name used by /sys/kernel/security/tomoyo/profile .
- *  (2) initial values for "struct tomoyo_profile".
- *  (3) max values for "struct tomoyo_profile".
- */
-static struct {
-	const char *keyword;
-	unsigned int current_value;
-	const unsigned int max_value;
-} tomoyo_control_array[TOMOYO_MAX_CONTROL_INDEX] = {
-	[TOMOYO_MAC_FOR_FILE]     = { "MAC_FOR_FILE",        0,       3 },
-	[TOMOYO_MAX_ACCEPT_ENTRY] = { "MAX_ACCEPT_ENTRY", 2048, INT_MAX },
-	[TOMOYO_VERBOSE]          = { "TOMOYO_VERBOSE",      1,       1 },
+/* String table for /sys/kernel/security/tomoyo/profile */
+static const char *tomoyo_mac_keywords[TOMOYO_MAX_MAC_INDEX
+				       + TOMOYO_MAX_MAC_CATEGORY_INDEX] = {
+	[TOMOYO_MAC_FILE_EXECUTE]    = "file::execute",
+	[TOMOYO_MAC_FILE_OPEN]       = "file::open",
+	[TOMOYO_MAC_FILE_CREATE]     = "file::create",
+	[TOMOYO_MAC_FILE_UNLINK]     = "file::unlink",
+	[TOMOYO_MAC_FILE_MKDIR]      = "file::mkdir",
+	[TOMOYO_MAC_FILE_RMDIR]      = "file::rmdir",
+	[TOMOYO_MAC_FILE_MKFIFO]     = "file::mkfifo",
+	[TOMOYO_MAC_FILE_MKSOCK]     = "file::mksock",
+	[TOMOYO_MAC_FILE_TRUNCATE]   = "file::truncate",
+	[TOMOYO_MAC_FILE_SYMLINK]    = "file::symlink",
+	[TOMOYO_MAC_FILE_REWRITE]    = "file::rewrite",
+	[TOMOYO_MAC_FILE_MKBLOCK]    = "file::mkblock",
+	[TOMOYO_MAC_FILE_MKCHAR]     = "file::mkchar",
+	[TOMOYO_MAC_FILE_LINK]       = "file::link",
+	[TOMOYO_MAC_FILE_RENAME]     = "file::rename",
+	[TOMOYO_MAC_FILE_CHMOD]      = "file::chmod",
+	[TOMOYO_MAC_FILE_CHOWN]      = "file::chown",
+	[TOMOYO_MAC_FILE_CHGRP]      = "file::chgrp",
+	[TOMOYO_MAC_FILE_IOCTL]      = "file::ioctl",
+	[TOMOYO_MAC_FILE_CHROOT]     = "file::chroot",
+	[TOMOYO_MAC_FILE_MOUNT]      = "file::mount",
+	[TOMOYO_MAC_FILE_UMOUNT]     = "file::umount",
+	[TOMOYO_MAC_FILE_PIVOT_ROOT] = "file::pivot_root",
+	[TOMOYO_MAX_MAC_INDEX + TOMOYO_MAC_CATEGORY_FILE] = "file",
 };
 
-/*
- * tomoyo_profile is a structure which is used for holding the mode of access
- * controls. TOMOYO has 4 modes: disabled, learning, permissive, enforcing.
- * An administrator can define up to 256 profiles.
- * The ->profile of "struct tomoyo_domain_info" is used for remembering
- * the profile's number (0 - 255) assigned to that domain.
- */
-static struct tomoyo_profile {
-	unsigned int value[TOMOYO_MAX_CONTROL_INDEX];
-	const struct tomoyo_path_info *comment;
-} *tomoyo_profile_ptr[TOMOYO_MAX_PROFILES];
-
 /* Permit policy management by non-root user? */
 static bool tomoyo_manage_by_non_root;
 
 /* Utility functions. */
 
-/* Open operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_open_control(const u8 type, struct file *file);
-/* Close /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_close_control(struct file *file);
-/* Read operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_read_control(struct file *file, char __user *buffer,
-			       const int buffer_len);
-/* Write operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_write_control(struct file *file, const char __user *buffer,
-				const int buffer_len);
-
 /**
- * tomoyo_parse_name_union - Parse a tomoyo_name_union.
+ * tomoyo_yesno - Return "yes" or "no".
  *
- * @filename: Name or name group.
- * @ptr:      Pointer to "struct tomoyo_name_union".
- *
- * Returns true on success, false otherwise.
+ * @value: Bool value.
  */
-bool tomoyo_parse_name_union(const char *filename,
-			     struct tomoyo_name_union *ptr)
+static const char *tomoyo_yesno(const unsigned int value)
 {
-	if (!tomoyo_is_correct_path(filename, 0, 0, 0))
-		return false;
-	if (filename[0] == '@') {
-		ptr->group = tomoyo_get_path_group(filename + 1);
-		ptr->is_group = true;
-		return ptr->group != NULL;
-	}
-	ptr->filename = tomoyo_get_name(filename);
-	ptr->is_group = false;
-	return ptr->filename != NULL;
+	return value ? "yes" : "no";
 }
 
-/**
- * tomoyo_print_name_union - Print a tomoyo_name_union.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to "struct tomoyo_name_union".
- *
- * Returns true on success, false otherwise.
- */
-static bool tomoyo_print_name_union(struct tomoyo_io_buffer *head,
-				 const struct tomoyo_name_union *ptr)
+static void tomoyo_addprintf(char *buffer, int len, const char *fmt, ...)
 {
-	int pos = head->read_avail;
-	if (pos && head->read_buf[pos - 1] == ' ')
-		head->read_avail--;
-	if (ptr->is_group)
-		return tomoyo_io_printf(head, " @%s",
-					ptr->group->group_name->name);
-	return tomoyo_io_printf(head, " %s", ptr->filename->name);
+	va_list args;
+	const int pos = strlen(buffer);
+	va_start(args, fmt);
+	vsnprintf(buffer + pos, len - pos - 1, fmt, args);
+	va_end(args);
 }
 
 /**
- * tomoyo_is_byte_range - Check whether the string isa \ooo style octal value.
- *
- * @str: Pointer to the string.
+ * tomoyo_flush - Flush queued string to userspace's buffer.
  *
- * Returns true if @str is a \ooo style octal value, false otherwise.
+ * @head:   Pointer to "struct tomoyo_io_buffer".
  *
- * TOMOYO uses \ooo style representation for 0x01 - 0x20 and 0x7F - 0xFF.
- * This function verifies that \ooo is in valid range.
+ * Returns true if all data was flushed, false otherwise.
  */
-static inline bool tomoyo_is_byte_range(const char *str)
+static bool tomoyo_flush(struct tomoyo_io_buffer *head)
 {
-	return *str >= '0' && *str++ <= '3' &&
-		*str >= '0' && *str++ <= '7' &&
-		*str >= '0' && *str <= '7';
+	while (head->r.w_pos) {
+		const char *w = head->r.w[0];
+		int len = strlen(w);
+		if (len) {
+			if (len > head->read_user_buf_avail)
+				len = head->read_user_buf_avail;
+			if (!len)
+				return false;
+			if (copy_to_user(head->read_user_buf, w, len))
+				return false;
+			head->read_user_buf_avail -= len;
+			head->read_user_buf += len;
+			w += len;
+		}
+		if (*w) {
+			head->r.w[0] = w;
+			return false;
+		}
+		/* Add '\0' for query. */
+		if (head->poll) {
+			if (!head->read_user_buf_avail ||
+			    copy_to_user(head->read_user_buf, "", 1))
+				return false;
+			head->read_user_buf_avail--;
+			head->read_user_buf++;
+		}
+		head->r.w_pos--;
+		for (len = 0; len < head->r.w_pos; len++)
+			head->r.w[len] = head->r.w[len + 1];
+	}
+	head->r.avail = 0;
+	return true;
 }
 
 /**
- * tomoyo_is_alphabet_char - Check whether the character is an alphabet.
+ * tomoyo_set_string - Queue string to "struct tomoyo_io_buffer" structure.
  *
- * @c: The character to check.
+ * @head:   Pointer to "struct tomoyo_io_buffer".
+ * @string: String to print.
  *
- * Returns true if @c is an alphabet character, false otherwise.
+ * Note that @string has to be kept valid until @head is kfree()d.
+ * This means that char[] allocated on stack memory cannot be passed to
+ * this function. Use tomoyo_io_printf() for char[] allocated on stack memory.
  */
-static inline bool tomoyo_is_alphabet_char(const char c)
+static void tomoyo_set_string(struct tomoyo_io_buffer *head, const char *string)
 {
-	return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z');
+	if (head->r.w_pos < TOMOYO_MAX_IO_READ_QUEUE) {
+		head->r.w[head->r.w_pos++] = string;
+		tomoyo_flush(head);
+	} else
+		WARN_ON(1);
 }
 
 /**
- * tomoyo_make_byte - Make byte value from three octal characters.
+ * tomoyo_io_printf - printf() to "struct tomoyo_io_buffer" structure.
  *
- * @c1: The first character.
- * @c2: The second character.
- * @c3: The third character.
- *
- * Returns byte value.
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ * @fmt:  The printf()'s format string, followed by parameters.
  */
-static inline u8 tomoyo_make_byte(const u8 c1, const u8 c2, const u8 c3)
+void tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
 {
-	return ((c1 - '0') << 6) + ((c2 - '0') << 3) + (c3 - '0');
+	va_list args;
+	int len;
+	int pos = head->r.avail;
+	int size = head->readbuf_size - pos;
+	if (size <= 0)
+		return;
+	va_start(args, fmt);
+	len = vsnprintf(head->read_buf + pos, size, fmt, args) + 1;
+	va_end(args);
+	if (pos + len >= head->readbuf_size) {
+		WARN_ON(1);
+		return;
+	}
+	head->r.avail += len;
+	tomoyo_set_string(head, head->read_buf + pos);
 }
 
-/**
- * tomoyo_str_starts - Check whether the given string starts with the given keyword.
- *
- * @src:  Pointer to pointer to the string.
- * @find: Pointer to the keyword.
- *
- * Returns true if @src starts with @find, false otherwise.
- *
- * The @src is updated to point the first character after the @find
- * if @src starts with @find.
- */
-static bool tomoyo_str_starts(char **src, const char *find)
+static void tomoyo_set_space(struct tomoyo_io_buffer *head)
 {
-	const int len = strlen(find);
-	char *tmp = *src;
-
-	if (strncmp(tmp, find, len))
-		return false;
-	tmp += len;
-	*src = tmp;
-	return true;
+	tomoyo_set_string(head, " ");
 }
 
-/**
- * tomoyo_normalize_line - Format string.
- *
- * @buffer: The line to normalize.
- *
- * Leading and trailing whitespaces are removed.
- * Multiple whitespaces are packed into single space.
- *
- * Returns nothing.
- */
-static void tomoyo_normalize_line(unsigned char *buffer)
+static bool tomoyo_set_lf(struct tomoyo_io_buffer *head)
 {
-	unsigned char *sp = buffer;
-	unsigned char *dp = buffer;
-	bool first = true;
-
-	while (tomoyo_is_invalid(*sp))
-		sp++;
-	while (*sp) {
-		if (!first)
-			*dp++ = ' ';
-		first = false;
-		while (tomoyo_is_valid(*sp))
-			*dp++ = *sp++;
-		while (tomoyo_is_invalid(*sp))
-			sp++;
-	}
-	*dp = '\0';
+	tomoyo_set_string(head, "\n");
+	return !head->r.w_pos;
 }
 
 /**
- * tomoyo_tokenize - Tokenize string.
- *
- * @buffer: The line to tokenize.
- * @w:      Pointer to "char *".
- * @size:   Sizeof @w .
+ * tomoyo_print_name_union - Print a tomoyo_name_union.
  *
- * Returns true on success, false otherwise.
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ * @ptr:  Pointer to "struct tomoyo_name_union".
  */
-bool tomoyo_tokenize(char *buffer, char *w[], size_t size)
+static void tomoyo_print_name_union(struct tomoyo_io_buffer *head,
+				    const struct tomoyo_name_union *ptr)
 {
-	int count = size / sizeof(char *);
-	int i;
-	for (i = 0; i < count; i++)
-		w[i] = "";
-	for (i = 0; i < count; i++) {
-		char *cp = strchr(buffer, ' ');
-		if (cp)
-			*cp = '\0';
-		w[i] = buffer;
-		if (!cp)
-			break;
-		buffer = cp + 1;
+	tomoyo_set_space(head);
+	if (ptr->is_group) {
+		tomoyo_set_string(head, "@");
+		tomoyo_set_string(head, ptr->group->group_name->name);
+	} else {
+		tomoyo_set_string(head, ptr->filename->name);
 	}
-	return i < count || !*buffer;
 }
 
 /**
- * tomoyo_is_correct_path - Validate a pathname.
- * @filename:     The pathname to check.
- * @start_type:   Should the pathname start with '/'?
- *                1 = must / -1 = must not / 0 = don't care
- * @pattern_type: Can the pathname contain a wildcard?
- *                1 = must / -1 = must not / 0 = don't care
- * @end_type:     Should the pathname end with '/'?
- *                1 = must / -1 = must not / 0 = don't care
- *
- * Check whether the given filename follows the naming rules.
- * Returns true if @filename follows the naming rules, false otherwise.
+ * tomoyo_print_number_union - Print a tomoyo_number_union.
+ *
+ * @head:       Pointer to "struct tomoyo_io_buffer".
+ * @ptr:        Pointer to "struct tomoyo_number_union".
  */
-bool tomoyo_is_correct_path(const char *filename, const s8 start_type,
-			    const s8 pattern_type, const s8 end_type)
+static void tomoyo_print_number_union(struct tomoyo_io_buffer *head,
+				      const struct tomoyo_number_union *ptr)
 {
-	const char *const start = filename;
-	bool in_repetition = false;
-	bool contains_pattern = false;
-	unsigned char c;
-	unsigned char d;
-	unsigned char e;
-
-	if (!filename)
-		goto out;
-	c = *filename;
-	if (start_type == 1) { /* Must start with '/' */
-		if (c != '/')
-			goto out;
-	} else if (start_type == -1) { /* Must not start with '/' */
-		if (c == '/')
-			goto out;
-	}
-	if (c)
-		c = *(filename + strlen(filename) - 1);
-	if (end_type == 1) { /* Must end with '/' */
-		if (c != '/')
-			goto out;
-	} else if (end_type == -1) { /* Must not end with '/' */
-		if (c == '/')
-			goto out;
-	}
-	while (1) {
-		c = *filename++;
-		if (!c)
-			break;
-		if (c == '\\') {
-			c = *filename++;
-			switch (c) {
-			case '\\':  /* "\\" */
-				continue;
-			case '$':   /* "\$" */
-			case '+':   /* "\+" */
-			case '?':   /* "\?" */
-			case '*':   /* "\*" */
-			case '@':   /* "\@" */
-			case 'x':   /* "\x" */
-			case 'X':   /* "\X" */
-			case 'a':   /* "\a" */
-			case 'A':   /* "\A" */
-			case '-':   /* "\-" */
-				if (pattern_type == -1)
-					break; /* Must not contain pattern */
-				contains_pattern = true;
-				continue;
-			case '{':   /* "/\{" */
-				if (filename - 3 < start ||
-				    *(filename - 3) != '/')
-					break;
-				if (pattern_type == -1)
-					break; /* Must not contain pattern */
-				contains_pattern = true;
-				in_repetition = true;
-				continue;
-			case '}':   /* "\}/" */
-				if (*filename != '/')
-					break;
-				if (!in_repetition)
-					break;
-				in_repetition = false;
-				continue;
-			case '0':   /* "\ooo" */
-			case '1':
-			case '2':
-			case '3':
-				d = *filename++;
-				if (d < '0' || d > '7')
-					break;
-				e = *filename++;
-				if (e < '0' || e > '7')
-					break;
-				c = tomoyo_make_byte(c, d, e);
-				if (tomoyo_is_invalid(c))
-					continue; /* pattern is not \000 */
+	tomoyo_set_space(head);
+	if (ptr->is_group) {
+		tomoyo_set_string(head, "@");
+		tomoyo_set_string(head, ptr->group->group_name->name);
+	} else {
+		int i;
+		unsigned long min = ptr->values[0];
+		const unsigned long max = ptr->values[1];
+		u8 min_type = ptr->min_type;
+		const u8 max_type = ptr->max_type;
+		char buffer[128];
+		buffer[0] = '\0';
+		for (i = 0; i < 2; i++) {
+			switch (min_type) {
+			case TOMOYO_VALUE_TYPE_HEXADECIMAL:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "0x%lX", min);
+				break;
+			case TOMOYO_VALUE_TYPE_OCTAL:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "0%lo", min);
+				break;
+			default:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "%lu", min);
+				break;
 			}
-			goto out;
-		} else if (in_repetition && c == '/') {
-			goto out;
-		} else if (tomoyo_is_invalid(c)) {
-			goto out;
+			if (min == max && min_type == max_type)
+				break;
+			tomoyo_addprintf(buffer, sizeof(buffer), "-");
+			min_type = max_type;
+			min = max;
 		}
+		tomoyo_io_printf(head, "%s", buffer);
 	}
-	if (pattern_type == 1) { /* Must contain pattern */
-		if (!contains_pattern)
-			goto out;
-	}
-	if (in_repetition)
-		goto out;
-	return true;
- out:
-	return false;
 }
 
 /**
- * tomoyo_is_correct_domain - Check whether the given domainname follows the naming rules.
- * @domainname:   The domainname to check.
+ * tomoyo_assign_profile - Create a new profile.
  *
- * Returns true if @domainname follows the naming rules, false otherwise.
+ * @profile: Profile number to create.
+ *
+ * Returns pointer to "struct tomoyo_profile" on success, NULL otherwise.
  */
-bool tomoyo_is_correct_domain(const unsigned char *domainname)
+static struct tomoyo_profile *tomoyo_assign_profile(const unsigned int profile)
 {
-	unsigned char c;
-	unsigned char d;
-	unsigned char e;
-
-	if (!domainname || strncmp(domainname, TOMOYO_ROOT_NAME,
-				   TOMOYO_ROOT_NAME_LEN))
+	struct tomoyo_profile *ptr;
+	struct tomoyo_profile *entry;
+	if (profile >= TOMOYO_MAX_PROFILES)
+		return NULL;
+	ptr = tomoyo_profile_ptr[profile];
+	if (ptr)
+		return ptr;
+	entry = kzalloc(sizeof(*entry), GFP_NOFS);
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		goto out;
-	domainname += TOMOYO_ROOT_NAME_LEN;
-	if (!*domainname)
-		return true;
-	do {
-		if (*domainname++ != ' ')
-			goto out;
-		if (*domainname++ != '/')
-			goto out;
-		while ((c = *domainname) != '\0' && c != ' ') {
-			domainname++;
-			if (c == '\\') {
-				c = *domainname++;
-				switch ((c)) {
-				case '\\':  /* "\\" */
-					continue;
-				case '0':   /* "\ooo" */
-				case '1':
-				case '2':
-				case '3':
-					d = *domainname++;
-					if (d < '0' || d > '7')
-						break;
-					e = *domainname++;
-					if (e < '0' || e > '7')
-						break;
-					c = tomoyo_make_byte(c, d, e);
-					if (tomoyo_is_invalid(c))
-						/* pattern is not \000 */
-						continue;
-				}
-				goto out;
-			} else if (tomoyo_is_invalid(c)) {
-				goto out;
-			}
-		}
-	} while (*domainname);
-	return true;
+	ptr = tomoyo_profile_ptr[profile];
+	if (!ptr && tomoyo_memory_ok(entry)) {
+		ptr = entry;
+		ptr->learning = &tomoyo_default_profile.preference;
+		ptr->permissive = &tomoyo_default_profile.preference;
+		ptr->enforcing = &tomoyo_default_profile.preference;
+		ptr->default_config = TOMOYO_CONFIG_DISABLED;
+		memset(ptr->config, TOMOYO_CONFIG_USE_DEFAULT,
+		       sizeof(ptr->config));
+		mb(); /* Avoid out-of-order execution. */
+		tomoyo_profile_ptr[profile] = ptr;
+		entry = NULL;
+	}
+	mutex_unlock(&tomoyo_policy_lock);
  out:
-	return false;
+	kfree(entry);
+	return ptr;
 }
 
 /**
- * tomoyo_is_domain_def - Check whether the given token can be a domainname.
+ * tomoyo_profile - Find a profile.
  *
- * @buffer: The token to check.
+ * @profile: Profile number to find.
  *
- * Returns true if @buffer possibly be a domainname, false otherwise.
+ * Returns pointer to "struct tomoyo_profile".
  */
-bool tomoyo_is_domain_def(const unsigned char *buffer)
+struct tomoyo_profile *tomoyo_profile(const u8 profile)
 {
-	return !strncmp(buffer, TOMOYO_ROOT_NAME, TOMOYO_ROOT_NAME_LEN);
+	struct tomoyo_profile *ptr = tomoyo_profile_ptr[profile];
+	if (!tomoyo_policy_loaded)
+		return &tomoyo_default_profile;
+	BUG_ON(!ptr);
+	return ptr;
 }
 
-/**
- * tomoyo_find_domain - Find a domain by the given name.
- *
- * @domainname: The domainname to find.
- *
- * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname)
+static s8 tomoyo_find_yesno(const char *string, const char *find)
 {
-	struct tomoyo_domain_info *domain;
-	struct tomoyo_path_info name;
-
-	name.name = domainname;
-	tomoyo_fill_path_info(&name);
-	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-		if (!domain->is_deleted &&
-		    !tomoyo_pathcmp(&name, domain->domainname))
-			return domain;
+	const char *cp = strstr(string, find);
+	if (cp) {
+		cp += strlen(find);
+		if (!strncmp(cp, "=yes", 4))
+			return 1;
+		else if (!strncmp(cp, "=no", 3))
+			return 0;
 	}
-	return NULL;
+	return -1;
 }
 
-/**
- * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token.
- *
- * @filename: The string to evaluate.
- *
- * Returns the initial length without a pattern in @filename.
- */
-static int tomoyo_const_part_length(const char *filename)
+static void tomoyo_set_bool(bool *b, const char *string, const char *find)
 {
-	char c;
-	int len = 0;
-
-	if (!filename)
-		return 0;
-	while ((c = *filename++) != '\0') {
-		if (c != '\\') {
-			len++;
-			continue;
-		}
-		c = *filename++;
-		switch (c) {
-		case '\\':  /* "\\" */
-			len += 2;
-			continue;
-		case '0':   /* "\ooo" */
-		case '1':
-		case '2':
-		case '3':
-			c = *filename++;
-			if (c < '0' || c > '7')
-				break;
-			c = *filename++;
-			if (c < '0' || c > '7')
-				break;
-			len += 4;
-			continue;
-		}
+	switch (tomoyo_find_yesno(string, find)) {
+	case 1:
+		*b = true;
+		break;
+	case 0:
+		*b = false;
 		break;
 	}
-	return len;
 }
 
-/**
- * tomoyo_fill_path_info - Fill in "struct tomoyo_path_info" members.
- *
- * @ptr: Pointer to "struct tomoyo_path_info" to fill in.
- *
- * The caller sets "struct tomoyo_path_info"->name.
- */
-void tomoyo_fill_path_info(struct tomoyo_path_info *ptr)
+static void tomoyo_set_uint(unsigned int *i, const char *string,
+			    const char *find)
 {
-	const char *name = ptr->name;
-	const int len = strlen(name);
-
-	ptr->const_len = tomoyo_const_part_length(name);
-	ptr->is_dir = len && (name[len - 1] == '/');
-	ptr->is_patterned = (ptr->const_len < len);
-	ptr->hash = full_name_hash(name, len);
+	const char *cp = strstr(string, find);
+	if (cp)
+		sscanf(cp + strlen(find), "=%u", i);
 }
 
-/**
- * tomoyo_file_matches_pattern2 - Pattern matching without '/' character
- * and "\-" pattern.
- *
- * @filename:     The start of string to check.
- * @filename_end: The end of string to check.
- * @pattern:      The start of pattern to compare.
- * @pattern_end:  The end of pattern to compare.
- *
- * Returns true if @filename matches @pattern, false otherwise.
- */
-static bool tomoyo_file_matches_pattern2(const char *filename,
-					 const char *filename_end,
-					 const char *pattern,
-					 const char *pattern_end)
+static void tomoyo_set_pref(const char *name, const char *value,
+			    const bool use_default,
+			    struct tomoyo_profile *profile)
 {
-	while (filename < filename_end && pattern < pattern_end) {
-		char c;
-		if (*pattern != '\\') {
-			if (*filename++ != *pattern++)
-				return false;
-			continue;
+	struct tomoyo_preference **pref;
+	bool *verbose;
+	if (!strcmp(name, "enforcing")) {
+		if (use_default) {
+			pref = &profile->enforcing;
+			goto set_default;
 		}
-		c = *filename;
-		pattern++;
-		switch (*pattern) {
-			int i;
-			int j;
-		case '?':
-			if (c == '/') {
-				return false;
-			} else if (c == '\\') {
-				if (filename[1] == '\\')
-					filename++;
-				else if (tomoyo_is_byte_range(filename + 1))
-					filename += 3;
-				else
-					return false;
-			}
-			break;
-		case '\\':
-			if (c != '\\')
-				return false;
-			if (*++filename != '\\')
-				return false;
-			break;
-		case '+':
-			if (!isdigit(c))
-				return false;
-			break;
-		case 'x':
-			if (!isxdigit(c))
-				return false;
-			break;
-		case 'a':
-			if (!tomoyo_is_alphabet_char(c))
-				return false;
-			break;
-		case '0':
-		case '1':
-		case '2':
-		case '3':
-			if (c == '\\' && tomoyo_is_byte_range(filename + 1)
-			    && strncmp(filename + 1, pattern, 3) == 0) {
-				filename += 3;
-				pattern += 2;
-				break;
-			}
-			return false; /* Not matched. */
-		case '*':
-		case '@':
-			for (i = 0; i <= filename_end - filename; i++) {
-				if (tomoyo_file_matches_pattern2(
-						    filename + i, filename_end,
-						    pattern + 1, pattern_end))
-					return true;
-				c = filename[i];
-				if (c == '.' && *pattern == '@')
-					break;
-				if (c != '\\')
-					continue;
-				if (filename[i + 1] == '\\')
-					i++;
-				else if (tomoyo_is_byte_range(filename + i + 1))
-					i += 3;
-				else
-					break; /* Bad pattern. */
-			}
-			return false; /* Not matched. */
-		default:
-			j = 0;
-			c = *pattern;
-			if (c == '$') {
-				while (isdigit(filename[j]))
-					j++;
-			} else if (c == 'X') {
-				while (isxdigit(filename[j]))
-					j++;
-			} else if (c == 'A') {
-				while (tomoyo_is_alphabet_char(filename[j]))
-					j++;
-			}
-			for (i = 1; i <= j; i++) {
-				if (tomoyo_file_matches_pattern2(
-						    filename + i, filename_end,
-						    pattern + 1, pattern_end))
-					return true;
-			}
-			return false; /* Not matched or bad pattern. */
-		}
-		filename++;
-		pattern++;
-	}
-	while (*pattern == '\\' &&
-	       (*(pattern + 1) == '*' || *(pattern + 1) == '@'))
-		pattern += 2;
-	return filename == filename_end && pattern == pattern_end;
-}
-
-/**
- * tomoyo_file_matches_pattern - Pattern matching without without '/' character.
- *
- * @filename:     The start of string to check.
- * @filename_end: The end of string to check.
- * @pattern:      The start of pattern to compare.
- * @pattern_end:  The end of pattern to compare.
- *
- * Returns true if @filename matches @pattern, false otherwise.
- */
-static bool tomoyo_file_matches_pattern(const char *filename,
-					   const char *filename_end,
-					   const char *pattern,
-					   const char *pattern_end)
-{
-	const char *pattern_start = pattern;
-	bool first = true;
-	bool result;
-
-	while (pattern < pattern_end - 1) {
-		/* Split at "\-" pattern. */
-		if (*pattern++ != '\\' || *pattern++ != '-')
-			continue;
-		result = tomoyo_file_matches_pattern2(filename,
-						      filename_end,
-						      pattern_start,
-						      pattern - 2);
-		if (first)
-			result = !result;
-		if (result)
-			return false;
-		first = false;
-		pattern_start = pattern;
+		profile->enforcing = &profile->preference;
+		verbose = &profile->preference.enforcing_verbose;
+		goto set_verbose;
 	}
-	result = tomoyo_file_matches_pattern2(filename, filename_end,
-					      pattern_start, pattern_end);
-	return first ? result : !result;
-}
-
-/**
- * tomoyo_path_matches_pattern2 - Do pathname pattern matching.
- *
- * @f: The start of string to check.
- * @p: The start of pattern to compare.
- *
- * Returns true if @f matches @p, false otherwise.
- */
-static bool tomoyo_path_matches_pattern2(const char *f, const char *p)
-{
-	const char *f_delimiter;
-	const char *p_delimiter;
-
-	while (*f && *p) {
-		f_delimiter = strchr(f, '/');
-		if (!f_delimiter)
-			f_delimiter = f + strlen(f);
-		p_delimiter = strchr(p, '/');
-		if (!p_delimiter)
-			p_delimiter = p + strlen(p);
-		if (*p == '\\' && *(p + 1) == '{')
-			goto recursive;
-		if (!tomoyo_file_matches_pattern(f, f_delimiter, p,
-						 p_delimiter))
-			return false;
-		f = f_delimiter;
-		if (*f)
-			f++;
-		p = p_delimiter;
-		if (*p)
-			p++;
+	if (!strcmp(name, "permissive")) {
+		if (use_default) {
+			pref = &profile->permissive;
+			goto set_default;
+		}
+		profile->permissive = &profile->preference;
+		verbose = &profile->preference.permissive_verbose;
+		goto set_verbose;
 	}
-	/* Ignore trailing "\*" and "\@" in @pattern. */
-	while (*p == '\\' &&
-	       (*(p + 1) == '*' || *(p + 1) == '@'))
-		p += 2;
-	return !*f && !*p;
- recursive:
-	/*
-	 * The "\{" pattern is permitted only after '/' character.
-	 * This guarantees that below "*(p - 1)" is safe.
-	 * Also, the "\}" pattern is permitted only before '/' character
-	 * so that "\{" + "\}" pair will not break the "\-" operator.
-	 */
-	if (*(p - 1) != '/' || p_delimiter <= p + 3 || *p_delimiter != '/' ||
-	    *(p_delimiter - 1) != '}' || *(p_delimiter - 2) != '\\')
-		return false; /* Bad pattern. */
-	do {
-		/* Compare current component with pattern. */
-		if (!tomoyo_file_matches_pattern(f, f_delimiter, p + 2,
-						 p_delimiter - 2))
-			break;
-		/* Proceed to next component. */
-		f = f_delimiter;
-		if (!*f)
-			break;
-		f++;
-		/* Continue comparison. */
-		if (tomoyo_path_matches_pattern2(f, p_delimiter + 1))
-			return true;
-		f_delimiter = strchr(f, '/');
-	} while (f_delimiter);
-	return false; /* Not matched. */
-}
-
-/**
- * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
- *
- * @filename: The filename to check.
- * @pattern:  The pattern to compare.
- *
- * Returns true if matches, false otherwise.
- *
- * The following patterns are available.
- *   \\     \ itself.
- *   \ooo   Octal representation of a byte.
- *   \*     Zero or more repetitions of characters other than '/'.
- *   \@     Zero or more repetitions of characters other than '/' or '.'.
- *   \?     1 byte character other than '/'.
- *   \$     One or more repetitions of decimal digits.
- *   \+     1 decimal digit.
- *   \X     One or more repetitions of hexadecimal digits.
- *   \x     1 hexadecimal digit.
- *   \A     One or more repetitions of alphabet characters.
- *   \a     1 alphabet character.
- *
- *   \-     Subtraction operator.
- *
- *   /\{dir\}/   '/' + 'One or more repetitions of dir/' (e.g. /dir/ /dir/dir/
- *               /dir/dir/dir/ ).
- */
-bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
-				 const struct tomoyo_path_info *pattern)
-{
-	const char *f = filename->name;
-	const char *p = pattern->name;
-	const int len = pattern->const_len;
-
-	/* If @pattern doesn't contain pattern, I can use strcmp(). */
-	if (!pattern->is_patterned)
-		return !tomoyo_pathcmp(filename, pattern);
-	/* Don't compare directory and non-directory. */
-	if (filename->is_dir != pattern->is_dir)
-		return false;
-	/* Compare the initial length without patterns. */
-	if (strncmp(f, p, len))
-		return false;
-	f += len;
-	p += len;
-	return tomoyo_path_matches_pattern2(f, p);
-}
-
-/**
- * tomoyo_io_printf - Transactional printf() to "struct tomoyo_io_buffer" structure.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @fmt:  The printf()'s format string, followed by parameters.
- *
- * Returns true if output was written, false otherwise.
- *
- * The snprintf() will truncate, but tomoyo_io_printf() won't.
- */
-bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
-{
-	va_list args;
-	int len;
-	int pos = head->read_avail;
-	int size = head->readbuf_size - pos;
-
-	if (size <= 0)
-		return false;
-	va_start(args, fmt);
-	len = vsnprintf(head->read_buf + pos, size, fmt, args);
-	va_end(args);
-	if (pos + len >= head->readbuf_size)
-		return false;
-	head->read_avail += len;
-	return true;
-}
-
-/**
- * tomoyo_get_exe - Get tomoyo_realpath() of current process.
- *
- * Returns the tomoyo_realpath() of current process on success, NULL otherwise.
- *
- * This function uses kzalloc(), so the caller must call kfree()
- * if this function didn't return NULL.
- */
-static const char *tomoyo_get_exe(void)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	const char *cp = NULL;
-
-	if (!mm)
-		return NULL;
-	down_read(&mm->mmap_sem);
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file) {
-			cp = tomoyo_realpath_from_path(&vma->vm_file->f_path);
-			break;
+	if (!strcmp(name, "learning")) {
+		if (use_default) {
+			pref = &profile->learning;
+			goto set_default;
 		}
+		profile->learning = &profile->preference;
+		tomoyo_set_uint(&profile->preference.learning_max_entry, value,
+			     "max_entry");
+		verbose = &profile->preference.learning_verbose;
+		goto set_verbose;
 	}
-	up_read(&mm->mmap_sem);
-	return cp;
+	return;
+ set_default:
+	*pref = &tomoyo_default_profile.preference;
+	return;
+ set_verbose:
+	tomoyo_set_bool(verbose, value, "verbose");
 }
 
-/**
- * tomoyo_get_msg - Get warning message.
- *
- * @is_enforce: Is it enforcing mode?
- *
- * Returns "ERROR" or "WARNING".
- */
-const char *tomoyo_get_msg(const bool is_enforce)
+static int tomoyo_set_mode(char *name, const char *value,
+			   const bool use_default,
+			   struct tomoyo_profile *profile)
 {
-	if (is_enforce)
-		return "ERROR";
-	else
-		return "WARNING";
-}
-
-/**
- * tomoyo_check_flags - Check mode for specified functionality.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- * @index:  The functionality to check mode.
- *
- * TOMOYO checks only process context.
- * This code disables TOMOYO's enforcement in case the function is called from
- * interrupt context.
- */
-unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain,
-				const u8 index)
-{
-	const u8 profile = domain->profile;
-
-	if (WARN_ON(in_interrupt()))
-		return 0;
-	return tomoyo_policy_loaded && index < TOMOYO_MAX_CONTROL_INDEX
-#if TOMOYO_MAX_PROFILES != 256
-		&& profile < TOMOYO_MAX_PROFILES
-#endif
-		&& tomoyo_profile_ptr[profile] ?
-		tomoyo_profile_ptr[profile]->value[index] : 0;
-}
-
-/**
- * tomoyo_verbose_mode - Check whether TOMOYO is verbose mode.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns true if domain policy violation warning should be printed to
- * console.
- */
-bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain)
-{
-	return tomoyo_check_flags(domain, TOMOYO_VERBOSE) != 0;
-}
-
-/**
- * tomoyo_domain_quota_is_ok - Check for domain's quota.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns true if the domain is not exceeded quota, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain)
-{
-	unsigned int count = 0;
-	struct tomoyo_acl_info *ptr;
-
-	if (!domain)
-		return true;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		switch (ptr->type) {
-			struct tomoyo_path_acl *acl;
-			u32 perm;
-			u8 i;
-		case TOMOYO_TYPE_PATH_ACL:
-			acl = container_of(ptr, struct tomoyo_path_acl, head);
-			perm = acl->perm | (((u32) acl->perm_high) << 16);
-			for (i = 0; i < TOMOYO_MAX_PATH_OPERATION; i++)
-				if (perm & (1 << i))
-					count++;
-			if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
-				count -= 2;
-			break;
-		case TOMOYO_TYPE_PATH2_ACL:
-			perm = container_of(ptr, struct tomoyo_path2_acl, head)
-				->perm;
-			for (i = 0; i < TOMOYO_MAX_PATH2_OPERATION; i++)
-				if (perm & (1 << i))
-					count++;
+	u8 i;
+	u8 config;
+	if (!strcmp(name, "CONFIG")) {
+		i = TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX;
+		config = profile->default_config;
+	} else if (tomoyo_str_starts(&name, "CONFIG::")) {
+		config = 0;
+		for (i = 0; i < TOMOYO_MAX_MAC_INDEX
+			     + TOMOYO_MAX_MAC_CATEGORY_INDEX; i++) {
+			if (strcmp(name, tomoyo_mac_keywords[i]))
+				continue;
+			config = profile->config[i];
 			break;
 		}
+		if (i == TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX)
+			return -EINVAL;
+	} else {
+		return -EINVAL;
 	}
-	if (count < tomoyo_check_flags(domain, TOMOYO_MAX_ACCEPT_ENTRY))
-		return true;
-	if (!domain->quota_warned) {
-		domain->quota_warned = true;
-		printk(KERN_WARNING "TOMOYO-WARNING: "
-		       "Domain '%s' has so many ACLs to hold. "
-		       "Stopped learning mode.\n", domain->domainname->name);
-	}
-	return false;
-}
-
-/**
- * tomoyo_find_or_assign_new_profile - Create a new profile.
- *
- * @profile: Profile number to create.
- *
- * Returns pointer to "struct tomoyo_profile" on success, NULL otherwise.
- */
-static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned
-								int profile)
-{
-	struct tomoyo_profile *ptr = NULL;
-	int i;
-
-	if (profile >= TOMOYO_MAX_PROFILES)
-		return NULL;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		return NULL;
-	ptr = tomoyo_profile_ptr[profile];
-	if (ptr)
-		goto ok;
-	ptr = kmalloc(sizeof(*ptr), GFP_NOFS);
-	if (!tomoyo_memory_ok(ptr)) {
-		kfree(ptr);
-		ptr = NULL;
-		goto ok;
+	if (use_default) {
+		config = TOMOYO_CONFIG_USE_DEFAULT;
+	} else {
+		u8 mode;
+		for (mode = 0; mode < 4; mode++)
+			if (strstr(value, tomoyo_mode[mode]))
+				/*
+				 * Update lower 3 bits in order to distinguish
+				 * 'config' from 'TOMOYO_CONFIG_USE_DEAFULT'.
+				 */
+				config = (config & ~7) | mode;
 	}
-	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++)
-		ptr->value[i] = tomoyo_control_array[i].current_value;
-	mb(); /* Avoid out-of-order execution. */
-	tomoyo_profile_ptr[profile] = ptr;
- ok:
-	mutex_unlock(&tomoyo_policy_lock);
-	return ptr;
+	if (i < TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX)
+		profile->config[i] = config;
+	else if (config != TOMOYO_CONFIG_USE_DEFAULT)
+		profile->default_config = config;
+	return 0;
 }
 
 /**
- * tomoyo_write_profile - Write to profile table.
+ * tomoyo_write_profile - Write profile table.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -980,153 +430,165 @@ static int tomoyo_write_profile(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	unsigned int i;
-	unsigned int value;
+	bool use_default = false;
 	char *cp;
 	struct tomoyo_profile *profile;
-	unsigned long num;
-
-	cp = strchr(data, '-');
-	if (cp)
-		*cp = '\0';
-	if (strict_strtoul(data, 10, &num))
-		return -EINVAL;
-	if (cp)
+	if (sscanf(data, "PROFILE_VERSION=%u", &tomoyo_profile_version) == 1)
+		return 0;
+	i = simple_strtoul(data, &cp, 10);
+	if (data == cp) {
+		profile = &tomoyo_default_profile;
+	} else {
+		if (*cp != '-')
+			return -EINVAL;
 		data = cp + 1;
-	profile = tomoyo_find_or_assign_new_profile(num);
-	if (!profile)
-		return -EINVAL;
+		profile = tomoyo_assign_profile(i);
+		if (!profile)
+			return -EINVAL;
+	}
 	cp = strchr(data, '=');
 	if (!cp)
 		return -EINVAL;
-	*cp = '\0';
+	*cp++ = '\0';
+	if (profile != &tomoyo_default_profile)
+		use_default = strstr(cp, "use_default") != NULL;
+	if (tomoyo_str_starts(&data, "PREFERENCE::")) {
+		tomoyo_set_pref(data, cp, use_default, profile);
+		return 0;
+	}
+	if (profile == &tomoyo_default_profile)
+		return -EINVAL;
 	if (!strcmp(data, "COMMENT")) {
 		const struct tomoyo_path_info *old_comment = profile->comment;
-		profile->comment = tomoyo_get_name(cp + 1);
+		profile->comment = tomoyo_get_name(cp);
 		tomoyo_put_name(old_comment);
 		return 0;
 	}
-	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++) {
-		if (strcmp(data, tomoyo_control_array[i].keyword))
-			continue;
-		if (sscanf(cp + 1, "%u", &value) != 1) {
-			int j;
-			const char **modes;
-			switch (i) {
-			case TOMOYO_VERBOSE:
-				modes = tomoyo_mode_2;
-				break;
-			default:
-				modes = tomoyo_mode_4;
-				break;
-			}
-			for (j = 0; j < 4; j++) {
-				if (strcmp(cp + 1, modes[j]))
-					continue;
-				value = j;
-				break;
-			}
-			if (j == 4)
-				return -EINVAL;
-		} else if (value > tomoyo_control_array[i].max_value) {
-			value = tomoyo_control_array[i].max_value;
-		}
-		profile->value[i] = value;
-		return 0;
+	return tomoyo_set_mode(data, cp, use_default, profile);
+}
+
+static void tomoyo_print_preference(struct tomoyo_io_buffer *head,
+				    const int idx)
+{
+	struct tomoyo_preference *pref = &tomoyo_default_profile.preference;
+	const struct tomoyo_profile *profile = idx >= 0 ?
+		tomoyo_profile_ptr[idx] : NULL;
+	char buffer[16] = "";
+	if (profile) {
+		buffer[sizeof(buffer) - 1] = '\0';
+		snprintf(buffer, sizeof(buffer) - 1, "%u-", idx);
 	}
-	return -EINVAL;
+	if (profile) {
+		pref = profile->learning;
+		if (pref == &tomoyo_default_profile.preference)
+			goto skip1;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ "
+			 "verbose=%s max_entry=%u }\n",
+			 buffer, "learning",
+			 tomoyo_yesno(pref->learning_verbose),
+			 pref->learning_max_entry);
+ skip1:
+	if (profile) {
+		pref = profile->permissive;
+		if (pref == &tomoyo_default_profile.preference)
+			goto skip2;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ verbose=%s }\n",
+			 buffer, "permissive",
+			 tomoyo_yesno(pref->permissive_verbose));
+ skip2:
+	if (profile) {
+		pref = profile->enforcing;
+		if (pref == &tomoyo_default_profile.preference)
+			return;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ verbose=%s }\n",
+			 buffer, "enforcing",
+			 tomoyo_yesno(pref->enforcing_verbose));
+}
+
+static void tomoyo_print_config(struct tomoyo_io_buffer *head, const u8 config)
+{
+	tomoyo_io_printf(head, "={ mode=%s }\n", tomoyo_mode[config & 3]);
 }
 
 /**
- * tomoyo_read_profile - Read from profile table.
+ * tomoyo_read_profile - Read profile table.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns 0.
  */
-static int tomoyo_read_profile(struct tomoyo_io_buffer *head)
+static void tomoyo_read_profile(struct tomoyo_io_buffer *head)
 {
-	static const int total = TOMOYO_MAX_CONTROL_INDEX + 1;
-	int step;
-
-	if (head->read_eof)
-		return 0;
-	for (step = head->read_step; step < TOMOYO_MAX_PROFILES * total;
-	     step++) {
-		const u8 index = step / total;
-		u8 type = step % total;
-		const struct tomoyo_profile *profile
-			= tomoyo_profile_ptr[index];
-		head->read_step = step;
-		if (!profile)
-			continue;
-		if (!type) { /* Print profile' comment tag. */
-			if (!tomoyo_io_printf(head, "%u-COMMENT=%s\n",
-					      index, profile->comment ?
-					      profile->comment->name : ""))
+	u8 index;
+	const struct tomoyo_profile *profile;
+ next:
+	index = head->r.index;
+	profile = tomoyo_profile_ptr[index];
+	switch (head->r.step) {
+	case 0:
+		tomoyo_io_printf(head, "PROFILE_VERSION=%s\n", "20090903");
+		tomoyo_print_preference(head, -1);
+		head->r.step++;
+		break;
+	case 1:
+		for ( ; head->r.index < TOMOYO_MAX_PROFILES;
+		      head->r.index++)
+			if (tomoyo_profile_ptr[head->r.index])
 				break;
-			continue;
+		if (head->r.index == TOMOYO_MAX_PROFILES)
+			return;
+		head->r.step++;
+		break;
+	case 2:
+		{
+			const struct tomoyo_path_info *comment =
+				profile->comment;
+			tomoyo_io_printf(head, "%u-COMMENT=", index);
+			tomoyo_set_string(head, comment ? comment->name : "");
+			tomoyo_set_lf(head);
+			head->r.step++;
 		}
-		type--;
-		if (type < TOMOYO_MAX_CONTROL_INDEX) {
-			const unsigned int value = profile->value[type];
-			const char **modes = NULL;
-			const char *keyword
-				= tomoyo_control_array[type].keyword;
-			switch (tomoyo_control_array[type].max_value) {
-			case 3:
-				modes = tomoyo_mode_4;
-				break;
-			case 1:
-				modes = tomoyo_mode_2;
-				break;
-			}
-			if (modes) {
-				if (!tomoyo_io_printf(head, "%u-%s=%s\n", index,
-						      keyword, modes[value]))
-					break;
-			} else {
-				if (!tomoyo_io_printf(head, "%u-%s=%u\n", index,
-						      keyword, value))
-					break;
-			}
+		break;
+	case 3:
+		{
+			tomoyo_io_printf(head, "%u-%s", index, "CONFIG");
+			tomoyo_print_config(head, profile->default_config);
+			head->r.bit = 0;
+			head->r.step++;
+		}
+		break;
+	case 4:
+		for ( ; head->r.bit < TOMOYO_MAX_MAC_INDEX
+			      + TOMOYO_MAX_MAC_CATEGORY_INDEX; head->r.bit++) {
+			const u8 i = head->r.bit;
+			const u8 config = profile->config[i];
+			if (config == TOMOYO_CONFIG_USE_DEFAULT)
+				continue;
+			tomoyo_io_printf(head, "%u-%s%s", index, "CONFIG::",
+					 tomoyo_mac_keywords[i]);
+			tomoyo_print_config(head, config);
+			head->r.bit++;
+			break;
+		}
+		if (head->r.bit == TOMOYO_MAX_MAC_INDEX
+		    + TOMOYO_MAX_MAC_CATEGORY_INDEX) {
+			tomoyo_print_preference(head, index);
+			head->r.index++;
+			head->r.step = 1;
 		}
+		break;
 	}
-	if (step == TOMOYO_MAX_PROFILES * total)
-		head->read_eof = true;
-	return 0;
+	if (tomoyo_flush(head))
+		goto next;
 }
 
-/*
- * tomoyo_policy_manager_list is used for holding list of domainnames or
- * programs which are permitted to modify configuration via
- * /sys/kernel/security/tomoyo/ interface.
- *
- * An entry is added by
- *
- * # echo '<kernel> /sbin/mingetty /bin/login /bin/bash' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *  (if you want to specify by a domainname)
- *
- *  or
- *
- * # echo '/usr/lib/ccs/editpolicy' > /sys/kernel/security/tomoyo/manager
- *  (if you want to specify by a program's location)
- *
- * and is deleted by
- *
- * # echo 'delete <kernel> /sbin/mingetty /bin/login /bin/bash' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *
- *  or
- *
- * # echo 'delete /usr/lib/ccs/editpolicy' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *
- * and all entries are retrieved by
- *
- * # cat /sys/kernel/security/tomoyo/manager
- */
-LIST_HEAD(tomoyo_policy_manager_list);
+static bool tomoyo_same_manager(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_manager, head)->manager ==
+		container_of(b, struct tomoyo_manager, head)->manager;
+}
 
 /**
  * tomoyo_update_manager_entry - Add a manager entry.
@@ -1141,47 +603,29 @@ LIST_HEAD(tomoyo_policy_manager_list);
 static int tomoyo_update_manager_entry(const char *manager,
 				       const bool is_delete)
 {
-	struct tomoyo_policy_manager_entry *ptr;
-	struct tomoyo_policy_manager_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_manager e = { };
+	int error;
 
-	if (tomoyo_is_domain_def(manager)) {
-		if (!tomoyo_is_correct_domain(manager))
+	if (tomoyo_domain_def(manager)) {
+		if (!tomoyo_correct_domain(manager))
 			return -EINVAL;
 		e.is_domain = true;
 	} else {
-		if (!tomoyo_is_correct_path(manager, 1, -1, -1))
+		if (!tomoyo_correct_path(manager))
 			return -EINVAL;
 	}
 	e.manager = tomoyo_get_name(manager);
 	if (!e.manager)
 		return -ENOMEM;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (ptr->manager != e.manager)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_policy_manager_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_policy_manager_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				     tomoyo_same_manager);
 	tomoyo_put_name(e.manager);
 	return error;
 }
 
 /**
- * tomoyo_write_manager_policy - Write manager policy.
+ * tomoyo_write_manager - Write manager policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1189,7 +633,7 @@ static int tomoyo_update_manager_entry(const char *manager,
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_manager_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_manager(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE);
@@ -1202,47 +646,41 @@ static int tomoyo_write_manager_policy(struct tomoyo_io_buffer *head)
 }
 
 /**
- * tomoyo_read_manager_policy - Read manager policy.
+ * tomoyo_read_manager - Read manager policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
- * Returns 0.
- *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_manager_policy(struct tomoyo_io_buffer *head)
+static void tomoyo_read_manager(struct tomoyo_io_buffer *head)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_policy_manager_list) {
-		struct tomoyo_policy_manager_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_policy_manager_entry,
-				 list);
-		if (ptr->is_deleted)
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.acl,
+			     &tomoyo_policy_list[TOMOYO_ID_MANAGER]) {
+		struct tomoyo_manager *ptr =
+			list_entry(head->r.acl, typeof(*ptr), head.list);
+		if (ptr->head.is_deleted)
 			continue;
-		done = tomoyo_io_printf(head, "%s\n", ptr->manager->name);
-		if (!done)
-			break;
+		if (!tomoyo_flush(head))
+			return;
+		tomoyo_set_string(head, ptr->manager->name);
+		tomoyo_set_lf(head);
 	}
-	head->read_eof = done;
-	return 0;
+	head->r.eof = true;
 }
 
 /**
- * tomoyo_is_policy_manager - Check whether the current process is a policy manager.
+ * tomoyo_manager - Check whether the current process is a policy manager.
  *
  * Returns true if the current process is permitted to modify policy
  * via /sys/kernel/security/tomoyo/ interface.
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_policy_manager(void)
+static bool tomoyo_manager(void)
 {
-	struct tomoyo_policy_manager_entry *ptr;
+	struct tomoyo_manager *ptr;
 	const char *exe;
 	const struct task_struct *task = current;
 	const struct tomoyo_path_info *domainname = tomoyo_domain()->domainname;
@@ -1252,8 +690,9 @@ static bool tomoyo_is_policy_manager(void)
 		return true;
 	if (!tomoyo_manage_by_non_root && (task->cred->uid || task->cred->euid))
 		return false;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (!ptr->is_deleted && ptr->is_domain
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				head.list) {
+		if (!ptr->head.is_deleted && ptr->is_domain
 		    && !tomoyo_pathcmp(domainname, ptr->manager)) {
 			found = true;
 			break;
@@ -1264,8 +703,9 @@ static bool tomoyo_is_policy_manager(void)
 	exe = tomoyo_get_exe();
 	if (!exe)
 		return false;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (!ptr->is_deleted && !ptr->is_domain
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				head.list) {
+		if (!ptr->head.is_deleted && !ptr->is_domain
 		    && !strcmp(exe, ptr->manager->name)) {
 			found = true;
 			break;
@@ -1285,7 +725,7 @@ static bool tomoyo_is_policy_manager(void)
 }
 
 /**
- * tomoyo_is_select_one - Parse select command.
+ * tomoyo_select_one - Parse select command.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  * @data: String to parse.
@@ -1294,23 +734,31 @@ static bool tomoyo_is_policy_manager(void)
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head,
-				 const char *data)
+static bool tomoyo_select_one(struct tomoyo_io_buffer *head, const char *data)
 {
 	unsigned int pid;
 	struct tomoyo_domain_info *domain = NULL;
+	bool global_pid = false;
 
-	if (sscanf(data, "pid=%u", &pid) == 1) {
+	if (!strcmp(data, "allow_execute")) {
+		head->r.print_execute_only = true;
+		return true;
+	}
+	if (sscanf(data, "pid=%u", &pid) == 1 ||
+	    (global_pid = true, sscanf(data, "global-pid=%u", &pid) == 1)) {
 		struct task_struct *p;
 		rcu_read_lock();
 		read_lock(&tasklist_lock);
-		p = find_task_by_vpid(pid);
+		if (global_pid)
+			p = find_task_by_pid_ns(pid, &init_pid_ns);
+		else
+			p = find_task_by_vpid(pid);
 		if (p)
 			domain = tomoyo_real_domain(p);
 		read_unlock(&tasklist_lock);
 		rcu_read_unlock();
 	} else if (!strncmp(data, "domain=", 7)) {
-		if (tomoyo_is_domain_def(data + 7))
+		if (tomoyo_domain_def(data + 7))
 			domain = tomoyo_find_domain(data + 7);
 	} else
 		return false;
@@ -1318,24 +766,13 @@ static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head,
 	/* Accessing read_buf is safe because head->io_sem is held. */
 	if (!head->read_buf)
 		return true; /* Do nothing if open(O_WRONLY). */
-	head->read_avail = 0;
+	memset(&head->r, 0, sizeof(head->r));
+	head->r.print_this_domain_only = true;
+	head->r.eof = !domain;
+	head->r.domain = &domain->list;
 	tomoyo_io_printf(head, "# select %s\n", data);
-	head->read_single_domain = true;
-	head->read_eof = !domain;
-	if (domain) {
-		struct tomoyo_domain_info *d;
-		head->read_var1 = NULL;
-		list_for_each_entry_rcu(d, &tomoyo_domain_list, list) {
-			if (d == domain)
-				break;
-			head->read_var1 = &d->list;
-		}
-		head->read_var2 = NULL;
-		head->read_bit = 0;
-		head->read_step = 0;
-		if (domain->is_deleted)
-			tomoyo_io_printf(head, "# This is a deleted domain.\n");
-	}
+	if (domain && domain->is_deleted)
+		tomoyo_io_printf(head, "# This is a deleted domain.\n");
 	return true;
 }
 
@@ -1373,7 +810,7 @@ static int tomoyo_delete_domain(char *domainname)
 }
 
 /**
- * tomoyo_write_domain_policy - Write domain policy.
+ * tomoyo_write_domain2 - Write domain policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1381,7 +818,24 @@ static int tomoyo_delete_domain(char *domainname)
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_domain_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_domain2(char *data, struct tomoyo_domain_info *domain,
+				const bool is_delete)
+{
+	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALLOW_MOUNT))
+		return tomoyo_write_mount(data, domain, is_delete);
+	return tomoyo_write_file(data, domain, is_delete);
+}
+
+/**
+ * tomoyo_write_domain - Write domain policy.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static int tomoyo_write_domain(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	struct tomoyo_domain_info *domain = head->write_var1;
@@ -1393,19 +847,19 @@ static int tomoyo_write_domain_policy(struct tomoyo_io_buffer *head)
 		is_delete = true;
 	else if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_SELECT))
 		is_select = true;
-	if (is_select && tomoyo_is_select_one(head, data))
+	if (is_select && tomoyo_select_one(head, data))
 		return 0;
 	/* Don't allow updating policies by non manager programs. */
-	if (!tomoyo_is_policy_manager())
+	if (!tomoyo_manager())
 		return -EPERM;
-	if (tomoyo_is_domain_def(data)) {
+	if (tomoyo_domain_def(data)) {
 		domain = NULL;
 		if (is_delete)
 			tomoyo_delete_domain(data);
 		else if (is_select)
 			domain = tomoyo_find_domain(data);
 		else
-			domain = tomoyo_find_or_assign_new_domain(data, 0);
+			domain = tomoyo_assign_domain(data, 0);
 		head->write_var1 = domain;
 		return 0;
 	}
@@ -1422,179 +876,198 @@ static int tomoyo_write_domain_policy(struct tomoyo_io_buffer *head)
 		domain->ignore_global_allow_read = !is_delete;
 		return 0;
 	}
-	return tomoyo_write_file_policy(data, domain, is_delete);
+	if (!strcmp(data, TOMOYO_KEYWORD_QUOTA_EXCEEDED)) {
+		domain->quota_warned = !is_delete;
+		return 0;
+	}
+	if (!strcmp(data, TOMOYO_KEYWORD_TRANSITION_FAILED)) {
+		domain->transition_failed = !is_delete;
+		return 0;
+	}
+	return tomoyo_write_domain2(data, domain, is_delete);
 }
 
 /**
- * tomoyo_print_path_acl - Print a single path ACL entry.
+ * tomoyo_fns - Find next set bit.
  *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to "struct tomoyo_path_acl".
+ * @perm: 8 bits value.
+ * @bit:  First bit to find.
  *
- * Returns true on success, false otherwise.
+ * Returns next on-bit on success, 8 otherwise.
  */
-static bool tomoyo_print_path_acl(struct tomoyo_io_buffer *head,
-				  struct tomoyo_path_acl *ptr)
+static u8 tomoyo_fns(const u8 perm, u8 bit)
 {
-	int pos;
-	u8 bit;
-	const u32 perm = ptr->perm | (((u32) ptr->perm_high) << 16);
-
-	for (bit = head->read_bit; bit < TOMOYO_MAX_PATH_OPERATION; bit++) {
-		if (!(perm & (1 << bit)))
-			continue;
-		/* Print "read/write" instead of "read" and "write". */
-		if ((bit == TOMOYO_TYPE_READ || bit == TOMOYO_TYPE_WRITE)
-		    && (perm & (1 << TOMOYO_TYPE_READ_WRITE)))
-			continue;
-		pos = head->read_avail;
-		if (!tomoyo_io_printf(head, "allow_%s ",
-				      tomoyo_path2keyword(bit)) ||
-		    !tomoyo_print_name_union(head, &ptr->name) ||
-		    !tomoyo_io_printf(head, "\n"))
-			goto out;
-	}
-	head->read_bit = 0;
-	return true;
- out:
-	head->read_bit = bit;
-	head->read_avail = pos;
-	return false;
+	for ( ; bit < 8; bit++)
+		if (perm & (1 << bit))
+			break;
+	return bit;
 }
 
 /**
- * tomoyo_print_path2_acl - Print a double path ACL entry.
+ * tomoyo_print_entry - Print an ACL entry.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to "struct tomoyo_path2_acl".
+ * @acl:  Pointer to an ACL entry.
  *
  * Returns true on success, false otherwise.
  */
-static bool tomoyo_print_path2_acl(struct tomoyo_io_buffer *head,
-				   struct tomoyo_path2_acl *ptr)
+static bool tomoyo_print_entry(struct tomoyo_io_buffer *head,
+			       struct tomoyo_acl_info *acl)
 {
-	int pos;
-	const u8 perm = ptr->perm;
+	const u8 acl_type = acl->type;
 	u8 bit;
 
-	for (bit = head->read_bit; bit < TOMOYO_MAX_PATH2_OPERATION; bit++) {
-		if (!(perm & (1 << bit)))
-			continue;
-		pos = head->read_avail;
-		if (!tomoyo_io_printf(head, "allow_%s ",
-				      tomoyo_path22keyword(bit)) ||
-		    !tomoyo_print_name_union(head, &ptr->name1) ||
-		    !tomoyo_print_name_union(head, &ptr->name2) ||
-		    !tomoyo_io_printf(head, "\n"))
-			goto out;
+	if (acl->is_deleted)
+		return true;
+ next:
+	bit = head->r.bit;
+	if (!tomoyo_flush(head))
+		return false;
+	else if (acl_type == TOMOYO_TYPE_PATH_ACL) {
+		struct tomoyo_path_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		const u16 perm = ptr->perm;
+		for ( ; bit < TOMOYO_MAX_PATH_OPERATION; bit++) {
+			if (!(perm & (1 << bit)))
+				continue;
+			if (head->r.print_execute_only &&
+			    bit != TOMOYO_TYPE_EXECUTE)
+				continue;
+			/* Print "read/write" instead of "read" and "write". */
+			if ((bit == TOMOYO_TYPE_READ ||
+			     bit == TOMOYO_TYPE_WRITE)
+			    && (perm & (1 << TOMOYO_TYPE_READ_WRITE)))
+				continue;
+			break;
+		}
+		if (bit >= TOMOYO_MAX_PATH_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_path_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+	} else if (head->r.print_execute_only) {
+		return true;
+	} else if (acl_type == TOMOYO_TYPE_PATH2_ACL) {
+		struct tomoyo_path2_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_PATH2_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_path2_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name1);
+		tomoyo_print_name_union(head, &ptr->name2);
+	} else if (acl_type == TOMOYO_TYPE_PATH_NUMBER_ACL) {
+		struct tomoyo_path_number_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_PATH_NUMBER_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s",
+				 tomoyo_path_number_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+		tomoyo_print_number_union(head, &ptr->number);
+	} else if (acl_type == TOMOYO_TYPE_MKDEV_ACL) {
+		struct tomoyo_mkdev_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_MKDEV_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_mkdev_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+		tomoyo_print_number_union(head, &ptr->mode);
+		tomoyo_print_number_union(head, &ptr->major);
+		tomoyo_print_number_union(head, &ptr->minor);
+	} else if (acl_type == TOMOYO_TYPE_MOUNT_ACL) {
+		struct tomoyo_mount_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		tomoyo_io_printf(head, "allow_mount");
+		tomoyo_print_name_union(head, &ptr->dev_name);
+		tomoyo_print_name_union(head, &ptr->dir_name);
+		tomoyo_print_name_union(head, &ptr->fs_type);
+		tomoyo_print_number_union(head, &ptr->flags);
 	}
-	head->read_bit = 0;
+	head->r.bit = bit + 1;
+	tomoyo_io_printf(head, "\n");
+	if (acl_type != TOMOYO_TYPE_MOUNT_ACL)
+		goto next;
+ done:
+	head->r.bit = 0;
 	return true;
- out:
-	head->read_bit = bit;
-	head->read_avail = pos;
-	return false;
 }
 
 /**
- * tomoyo_print_entry - Print an ACL entry.
+ * tomoyo_read_domain2 - Read domain policy.
  *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to an ACL entry.
+ * @head:   Pointer to "struct tomoyo_io_buffer".
+ * @domain: Pointer to "struct tomoyo_domain_info".
+ *
+ * Caller holds tomoyo_read_lock().
  *
  * Returns true on success, false otherwise.
  */
-static bool tomoyo_print_entry(struct tomoyo_io_buffer *head,
-			       struct tomoyo_acl_info *ptr)
+static bool tomoyo_read_domain2(struct tomoyo_io_buffer *head,
+				struct tomoyo_domain_info *domain)
 {
-	const u8 acl_type = ptr->type;
-
-	if (acl_type == TOMOYO_TYPE_PATH_ACL) {
-		struct tomoyo_path_acl *acl
-			= container_of(ptr, struct tomoyo_path_acl, head);
-		return tomoyo_print_path_acl(head, acl);
-	}
-	if (acl_type == TOMOYO_TYPE_PATH2_ACL) {
-		struct tomoyo_path2_acl *acl
-			= container_of(ptr, struct tomoyo_path2_acl, head);
-		return tomoyo_print_path2_acl(head, acl);
+	list_for_each_cookie(head->r.acl, &domain->acl_info_list) {
+		struct tomoyo_acl_info *ptr =
+			list_entry(head->r.acl, typeof(*ptr), list);
+		if (!tomoyo_print_entry(head, ptr))
+			return false;
 	}
-	BUG(); /* This must not happen. */
-	return false;
+	head->r.acl = NULL;
+	return true;
 }
 
 /**
- * tomoyo_read_domain_policy - Read domain policy.
+ * tomoyo_read_domain - Read domain policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
- * Returns 0.
- *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_domain_policy(struct tomoyo_io_buffer *head)
+static void tomoyo_read_domain(struct tomoyo_io_buffer *head)
 {
-	struct list_head *dpos;
-	struct list_head *apos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	if (head->read_step == 0)
-		head->read_step = 1;
-	list_for_each_cookie(dpos, head->read_var1, &tomoyo_domain_list) {
-		struct tomoyo_domain_info *domain;
-		const char *quota_exceeded = "";
-		const char *transition_failed = "";
-		const char *ignore_global_allow_read = "";
-		domain = list_entry(dpos, struct tomoyo_domain_info, list);
-		if (head->read_step != 1)
-			goto acl_loop;
-		if (domain->is_deleted && !head->read_single_domain)
-			continue;
-		/* Print domainname and flags. */
-		if (domain->quota_warned)
-			quota_exceeded = "quota_exceeded\n";
-		if (domain->transition_failed)
-			transition_failed = "transition_failed\n";
-		if (domain->ignore_global_allow_read)
-			ignore_global_allow_read
-				= TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "\n";
-		done = tomoyo_io_printf(head, "%s\n" TOMOYO_KEYWORD_USE_PROFILE
-					"%u\n%s%s%s\n",
-					domain->domainname->name,
-					domain->profile, quota_exceeded,
-					transition_failed,
-					ignore_global_allow_read);
-		if (!done)
-			break;
-		head->read_step = 2;
-acl_loop:
-		if (head->read_step == 3)
-			goto tail_mark;
-		/* Print ACL entries in the domain. */
-		list_for_each_cookie(apos, head->read_var2,
-				     &domain->acl_info_list) {
-			struct tomoyo_acl_info *ptr
-				= list_entry(apos, struct tomoyo_acl_info,
-					     list);
-			done = tomoyo_print_entry(head, ptr);
-			if (!done)
-				break;
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.domain, &tomoyo_domain_list) {
+		struct tomoyo_domain_info *domain =
+			list_entry(head->r.domain, typeof(*domain), list);
+		switch (head->r.step) {
+		case 0:
+			if (domain->is_deleted &&
+			    !head->r.print_this_domain_only)
+				continue;
+			/* Print domainname and flags. */
+			tomoyo_set_string(head, domain->domainname->name);
+			tomoyo_set_lf(head);
+			tomoyo_io_printf(head,
+					 TOMOYO_KEYWORD_USE_PROFILE "%u\n",
+					 domain->profile);
+			if (domain->quota_warned)
+				tomoyo_set_string(head, "quota_exceeded\n");
+			if (domain->transition_failed)
+				tomoyo_set_string(head, "transition_failed\n");
+			if (domain->ignore_global_allow_read)
+				tomoyo_set_string(head,
+				       TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ
+						  "\n");
+			head->r.step++;
+			tomoyo_set_lf(head);
+			/* fall through */
+		case 1:
+			if (!tomoyo_read_domain2(head, domain))
+				return;
+			head->r.step++;
+			if (!tomoyo_set_lf(head))
+				return;
+			/* fall through */
+		case 2:
+			head->r.step = 0;
+			if (head->r.print_this_domain_only)
+				goto done;
 		}
-		if (!done)
-			break;
-		head->read_step = 3;
-tail_mark:
-		done = tomoyo_io_printf(head, "\n");
-		if (!done)
-			break;
-		head->read_step = 1;
-		if (head->read_single_domain)
-			break;
 	}
-	head->read_eof = done;
-	return 0;
+ done:
+	head->r.eof = true;
 }
 
 /**
@@ -1607,7 +1080,7 @@ tail_mark:
  * This is equivalent to doing
  *
  *     ( echo "select " $domainname; echo "use_profile " $profile ) |
- *     /usr/lib/ccs/loadpolicy -d
+ *     /usr/sbin/tomoyo-loadpolicy -d
  *
  * Caller holds tomoyo_read_lock().
  */
@@ -1646,25 +1119,22 @@ static int tomoyo_write_domain_profile(struct tomoyo_io_buffer *head)
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
+static void tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	list_for_each_cookie(pos, head->read_var1, &tomoyo_domain_list) {
-		struct tomoyo_domain_info *domain;
-		domain = list_entry(pos, struct tomoyo_domain_info, list);
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.domain, &tomoyo_domain_list) {
+		struct tomoyo_domain_info *domain =
+			list_entry(head->r.domain, typeof(*domain), list);
 		if (domain->is_deleted)
 			continue;
-		done = tomoyo_io_printf(head, "%u %s\n", domain->profile,
-					domain->domainname->name);
-		if (!done)
-			break;
+		if (!tomoyo_flush(head))
+			return;
+		tomoyo_io_printf(head, "%u ", domain->profile);
+		tomoyo_set_string(head, domain->domainname->name);
+		tomoyo_set_lf(head);
 	}
-	head->read_eof = done;
-	return 0;
+	head->r.eof = true;
 }
 
 /**
@@ -1676,11 +1146,7 @@ static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
  */
 static int tomoyo_write_pid(struct tomoyo_io_buffer *head)
 {
-	unsigned long pid;
-	/* No error check. */
-	strict_strtoul(head->write_buf, 10, &pid);
-	head->read_step = (int) pid;
-	head->read_eof = false;
+	head->r.eof = false;
 	return 0;
 }
 
@@ -1694,29 +1160,57 @@ static int tomoyo_write_pid(struct tomoyo_io_buffer *head)
  * The PID is specified by tomoyo_write_pid() so that the user can obtain
  * using read()/write() interface rather than sysctl() interface.
  */
-static int tomoyo_read_pid(struct tomoyo_io_buffer *head)
+static void tomoyo_read_pid(struct tomoyo_io_buffer *head)
 {
-	if (head->read_avail == 0 && !head->read_eof) {
-		const int pid = head->read_step;
-		struct task_struct *p;
-		struct tomoyo_domain_info *domain = NULL;
-		rcu_read_lock();
-		read_lock(&tasklist_lock);
-		p = find_task_by_vpid(pid);
-		if (p)
-			domain = tomoyo_real_domain(p);
-		read_unlock(&tasklist_lock);
-		rcu_read_unlock();
-		if (domain)
-			tomoyo_io_printf(head, "%d %u %s", pid, domain->profile,
-					 domain->domainname->name);
-		head->read_eof = true;
+	char *buf = head->write_buf;
+	bool global_pid = false;
+	unsigned int pid;
+	struct task_struct *p;
+	struct tomoyo_domain_info *domain = NULL;
+
+	/* Accessing write_buf is safe because head->io_sem is held. */
+	if (!buf) {
+		head->r.eof = true;
+		return; /* Do nothing if open(O_RDONLY). */
 	}
-	return 0;
+	if (head->r.w_pos || head->r.eof)
+		return;
+	head->r.eof = true;
+	if (tomoyo_str_starts(&buf, "global-pid "))
+		global_pid = true;
+	pid = (unsigned int) simple_strtoul(buf, NULL, 10);
+	rcu_read_lock();
+	read_lock(&tasklist_lock);
+	if (global_pid)
+		p = find_task_by_pid_ns(pid, &init_pid_ns);
+	else
+		p = find_task_by_vpid(pid);
+	if (p)
+		domain = tomoyo_real_domain(p);
+	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
+	if (!domain)
+		return;
+	tomoyo_io_printf(head, "%u %u ", pid, domain->profile);
+	tomoyo_set_string(head, domain->domainname->name);
 }
 
+static const char *tomoyo_transition_type[TOMOYO_MAX_TRANSITION_TYPE] = {
+	[TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE]
+	= TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_INITIALIZE]
+	= TOMOYO_KEYWORD_INITIALIZE_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_NO_KEEP] = TOMOYO_KEYWORD_NO_KEEP_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_KEEP] = TOMOYO_KEYWORD_KEEP_DOMAIN
+};
+
+static const char *tomoyo_group_name[TOMOYO_MAX_GROUP] = {
+	[TOMOYO_PATH_GROUP] = TOMOYO_KEYWORD_PATH_GROUP,
+	[TOMOYO_NUMBER_GROUP] = TOMOYO_KEYWORD_NUMBER_GROUP
+};
+
 /**
- * tomoyo_write_exception_policy - Write exception policy.
+ * tomoyo_write_exception - Write exception policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1724,186 +1218,523 @@ static int tomoyo_read_pid(struct tomoyo_io_buffer *head)
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_exception_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_exception(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE);
-
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_KEEP_DOMAIN))
-		return tomoyo_write_domain_keeper_policy(data, false,
-							 is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_KEEP_DOMAIN))
-		return tomoyo_write_domain_keeper_policy(data, true, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_INITIALIZE_DOMAIN))
-		return tomoyo_write_domain_initializer_policy(data, false,
-							      is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN))
-		return tomoyo_write_domain_initializer_policy(data, true,
-							      is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALIAS))
-		return tomoyo_write_alias_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALLOW_READ))
-		return tomoyo_write_globally_readable_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_FILE_PATTERN))
-		return tomoyo_write_pattern_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_DENY_REWRITE))
-		return tomoyo_write_no_rewrite_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_PATH_GROUP))
-		return tomoyo_write_path_group_policy(data, is_delete);
+	u8 i;
+	static const struct {
+		const char *keyword;
+		int (*write) (char *, const bool);
+	} tomoyo_callback[4] = {
+		{ TOMOYO_KEYWORD_AGGREGATOR, tomoyo_write_aggregator },
+		{ TOMOYO_KEYWORD_FILE_PATTERN, tomoyo_write_pattern },
+		{ TOMOYO_KEYWORD_DENY_REWRITE, tomoyo_write_no_rewrite },
+		{ TOMOYO_KEYWORD_ALLOW_READ, tomoyo_write_globally_readable },
+	};
+
+	for (i = 0; i < TOMOYO_MAX_TRANSITION_TYPE; i++)
+		if (tomoyo_str_starts(&data, tomoyo_transition_type[i]))
+			return tomoyo_write_transition_control(data, is_delete,
+							       i);
+	for (i = 0; i < 4; i++)
+		if (tomoyo_str_starts(&data, tomoyo_callback[i].keyword))
+			return tomoyo_callback[i].write(data, is_delete);
+	for (i = 0; i < TOMOYO_MAX_GROUP; i++)
+		if (tomoyo_str_starts(&data, tomoyo_group_name[i]))
+			return tomoyo_write_group(data, is_delete, i);
 	return -EINVAL;
 }
 
 /**
- * tomoyo_read_exception_policy - Read exception policy.
+ * tomoyo_read_group - Read "struct tomoyo_path_group"/"struct tomoyo_number_group" list.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
+ * @idx:  Index number.
  *
- * Returns 0 on success, -EINVAL otherwise.
+ * Returns true on success, false otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_exception_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_read_group(struct tomoyo_io_buffer *head, const int idx)
 {
-	if (!head->read_eof) {
-		switch (head->read_step) {
-		case 0:
-			head->read_var2 = NULL;
-			head->read_step = 1;
-		case 1:
-			if (!tomoyo_read_domain_keeper_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 2;
-		case 2:
-			if (!tomoyo_read_globally_readable_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 3;
-		case 3:
-			head->read_var2 = NULL;
-			head->read_step = 4;
-		case 4:
-			if (!tomoyo_read_domain_initializer_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 5;
-		case 5:
-			if (!tomoyo_read_alias_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 6;
-		case 6:
-			head->read_var2 = NULL;
-			head->read_step = 7;
-		case 7:
-			if (!tomoyo_read_file_pattern(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 8;
-		case 8:
-			if (!tomoyo_read_no_rewrite_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 9;
-		case 9:
-			if (!tomoyo_read_path_group_policy(head))
-				break;
-			head->read_var1 = NULL;
-			head->read_var2 = NULL;
-			head->read_step = 10;
-		case 10:
-			head->read_eof = true;
+	list_for_each_cookie(head->r.group, &tomoyo_group_list[idx]) {
+		struct tomoyo_group *group =
+			list_entry(head->r.group, typeof(*group), list);
+		list_for_each_cookie(head->r.acl, &group->member_list) {
+			struct tomoyo_acl_head *ptr =
+				list_entry(head->r.acl, typeof(*ptr), list);
+			if (ptr->is_deleted)
+				continue;
+			if (!tomoyo_flush(head))
+				return false;
+			tomoyo_set_string(head, tomoyo_group_name[idx]);
+			tomoyo_set_string(head, group->group_name->name);
+			if (idx == TOMOYO_PATH_GROUP) {
+				tomoyo_set_space(head);
+				tomoyo_set_string(head, container_of
+					       (ptr, struct tomoyo_path_group,
+						head)->member_name->name);
+			} else if (idx == TOMOYO_NUMBER_GROUP) {
+				tomoyo_print_number_union(head, &container_of
+							  (ptr,
+						   struct tomoyo_number_group,
+							   head)->number);
+			}
+			tomoyo_set_lf(head);
+		}
+		head->r.acl = NULL;
+	}
+	head->r.group = NULL;
+	return true;
+}
+
+/**
+ * tomoyo_read_policy - Read "struct tomoyo_..._entry" list.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ * @idx:  Index number.
+ *
+ * Returns true on success, false otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static bool tomoyo_read_policy(struct tomoyo_io_buffer *head, const int idx)
+{
+	list_for_each_cookie(head->r.acl, &tomoyo_policy_list[idx]) {
+		struct tomoyo_acl_head *acl =
+			container_of(head->r.acl, typeof(*acl), list);
+		if (acl->is_deleted)
+			continue;
+		if (!tomoyo_flush(head))
+			return false;
+		switch (idx) {
+		case TOMOYO_ID_TRANSITION_CONTROL:
+			{
+				struct tomoyo_transition_control *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  tomoyo_transition_type
+						  [ptr->type]);
+				if (ptr->program)
+					tomoyo_set_string(head,
+							  ptr->program->name);
+				if (ptr->program && ptr->domainname)
+					tomoyo_set_string(head, " from ");
+				if (ptr->domainname)
+					tomoyo_set_string(head,
+							  ptr->domainname->
+							  name);
+			}
+			break;
+		case TOMOYO_ID_GLOBALLY_READABLE:
+			{
+				struct tomoyo_readable_file *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_ALLOW_READ);
+				tomoyo_set_string(head, ptr->filename->name);
+			}
+			break;
+		case TOMOYO_ID_AGGREGATOR:
+			{
+				struct tomoyo_aggregator *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_AGGREGATOR);
+				tomoyo_set_string(head,
+						  ptr->original_name->name);
+				tomoyo_set_space(head);
+				tomoyo_set_string(head,
+					       ptr->aggregated_name->name);
+			}
+			break;
+		case TOMOYO_ID_PATTERN:
+			{
+				struct tomoyo_no_pattern *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_FILE_PATTERN);
+				tomoyo_set_string(head, ptr->pattern->name);
+			}
+			break;
+		case TOMOYO_ID_NO_REWRITE:
+			{
+				struct tomoyo_no_rewrite *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_DENY_REWRITE);
+				tomoyo_set_string(head, ptr->pattern->name);
+			}
 			break;
 		default:
-			return -EINVAL;
+			continue;
 		}
+		tomoyo_set_lf(head);
 	}
-	return 0;
+	head->r.acl = NULL;
+	return true;
 }
 
-/* path to policy loader */
-static const char *tomoyo_loader = "/sbin/tomoyo-init";
+/**
+ * tomoyo_read_exception - Read exception policy.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static void tomoyo_read_exception(struct tomoyo_io_buffer *head)
+{
+	if (head->r.eof)
+		return;
+	while (head->r.step < TOMOYO_MAX_POLICY &&
+	       tomoyo_read_policy(head, head->r.step))
+		head->r.step++;
+	if (head->r.step < TOMOYO_MAX_POLICY)
+		return;
+	while (head->r.step < TOMOYO_MAX_POLICY + TOMOYO_MAX_GROUP &&
+	       tomoyo_read_group(head, head->r.step - TOMOYO_MAX_POLICY))
+		head->r.step++;
+	if (head->r.step < TOMOYO_MAX_POLICY + TOMOYO_MAX_GROUP)
+		return;
+	head->r.eof = true;
+}
 
 /**
- * tomoyo_policy_loader_exists - Check whether /sbin/tomoyo-init exists.
+ * tomoyo_print_header - Get header line of audit log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
  *
- * Returns true if /sbin/tomoyo-init exists, false otherwise.
+ * Returns string representation.
+ *
+ * This function uses kmalloc(), so caller must kfree() if this function
+ * didn't return NULL.
  */
-static bool tomoyo_policy_loader_exists(void)
+static char *tomoyo_print_header(struct tomoyo_request_info *r)
 {
-	/*
-	 * Don't activate MAC if the policy loader doesn't exist.
-	 * If the initrd includes /sbin/init but real-root-dev has not
-	 * mounted on / yet, activating MAC will block the system since
-	 * policies are not loaded yet.
-	 * Thus, let do_execve() call this function everytime.
-	 */
-	struct path path;
+	struct timeval tv;
+	const pid_t gpid = task_pid_nr(current);
+	static const int tomoyo_buffer_len = 4096;
+	char *buffer = kmalloc(tomoyo_buffer_len, GFP_NOFS);
+	if (!buffer)
+		return NULL;
+	do_gettimeofday(&tv);
+	snprintf(buffer, tomoyo_buffer_len - 1,
+		 "#timestamp=%lu profile=%u mode=%s (global-pid=%u)"
+		 " task={ pid=%u ppid=%u uid=%u gid=%u euid=%u"
+		 " egid=%u suid=%u sgid=%u fsuid=%u fsgid=%u }",
+		 tv.tv_sec, r->profile, tomoyo_mode[r->mode], gpid,
+		 (pid_t) sys_getpid(), (pid_t) sys_getppid(),
+		 current_uid(), current_gid(), current_euid(),
+		 current_egid(), current_suid(), current_sgid(),
+		 current_fsuid(), current_fsgid());
+	return buffer;
+}
 
-	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
-		printk(KERN_INFO "Not activating Mandatory Access Control now "
-		       "since %s doesn't exist.\n", tomoyo_loader);
-		return false;
+/**
+ * tomoyo_init_audit_log - Allocate buffer for audit logs.
+ *
+ * @len: Required size.
+ * @r:   Pointer to "struct tomoyo_request_info".
+ *
+ * Returns pointer to allocated memory.
+ *
+ * The @len is updated to add the header lines' size on success.
+ *
+ * This function uses kzalloc(), so caller must kfree() if this function
+ * didn't return NULL.
+ */
+static char *tomoyo_init_audit_log(int *len, struct tomoyo_request_info *r)
+{
+	char *buf = NULL;
+	const char *header;
+	const char *domainname;
+	if (!r->domain)
+		r->domain = tomoyo_domain();
+	domainname = r->domain->domainname->name;
+	header = tomoyo_print_header(r);
+	if (!header)
+		return NULL;
+	*len += strlen(domainname) + strlen(header) + 10;
+	buf = kzalloc(*len, GFP_NOFS);
+	if (buf)
+		snprintf(buf, (*len) - 1, "%s\n%s\n", header, domainname);
+	kfree(header);
+	return buf;
+}
+
+/* Wait queue for tomoyo_query_list. */
+static DECLARE_WAIT_QUEUE_HEAD(tomoyo_query_wait);
+
+/* Lock for manipulating tomoyo_query_list. */
+static DEFINE_SPINLOCK(tomoyo_query_list_lock);
+
+/* Structure for query. */
+struct tomoyo_query {
+	struct list_head list;
+	char *query;
+	int query_len;
+	unsigned int serial;
+	int timer;
+	int answer;
+};
+
+/* The list for "struct tomoyo_query". */
+static LIST_HEAD(tomoyo_query_list);
+
+/*
+ * Number of "struct file" referring /sys/kernel/security/tomoyo/query
+ * interface.
+ */
+static atomic_t tomoyo_query_observers = ATOMIC_INIT(0);
+
+/**
+ * tomoyo_supervisor - Ask for the supervisor's decision.
+ *
+ * @r:       Pointer to "struct tomoyo_request_info".
+ * @fmt:     The printf()'s format string, followed by parameters.
+ *
+ * Returns 0 if the supervisor decided to permit the access request which
+ * violated the policy in enforcing mode, TOMOYO_RETRY_REQUEST if the
+ * supervisor decided to retry the access request which violated the policy in
+ * enforcing mode, 0 if it is not in enforcing mode, -EPERM otherwise.
+ */
+int tomoyo_supervisor(struct tomoyo_request_info *r, const char *fmt, ...)
+{
+	va_list args;
+	int error = -EPERM;
+	int pos;
+	int len;
+	static unsigned int tomoyo_serial;
+	struct tomoyo_query *entry = NULL;
+	bool quota_exceeded = false;
+	char *header;
+	switch (r->mode) {
+		char *buffer;
+	case TOMOYO_CONFIG_LEARNING:
+		if (!tomoyo_domain_quota_is_ok(r))
+			return 0;
+		va_start(args, fmt);
+		len = vsnprintf((char *) &pos, sizeof(pos) - 1, fmt, args) + 4;
+		va_end(args);
+		buffer = kmalloc(len, GFP_NOFS);
+		if (!buffer)
+			return 0;
+		va_start(args, fmt);
+		vsnprintf(buffer, len - 1, fmt, args);
+		va_end(args);
+		tomoyo_normalize_line(buffer);
+		tomoyo_write_domain2(buffer, r->domain, false);
+		kfree(buffer);
+		/* fall through */
+	case TOMOYO_CONFIG_PERMISSIVE:
+		return 0;
 	}
-	path_put(&path);
-	return true;
+	if (!r->domain)
+		r->domain = tomoyo_domain();
+	if (!atomic_read(&tomoyo_query_observers))
+		return -EPERM;
+	va_start(args, fmt);
+	len = vsnprintf((char *) &pos, sizeof(pos) - 1, fmt, args) + 32;
+	va_end(args);
+	header = tomoyo_init_audit_log(&len, r);
+	if (!header)
+		goto out;
+	entry = kzalloc(sizeof(*entry), GFP_NOFS);
+	if (!entry)
+		goto out;
+	entry->query = kzalloc(len, GFP_NOFS);
+	if (!entry->query)
+		goto out;
+	len = ksize(entry->query);
+	spin_lock(&tomoyo_query_list_lock);
+	if (tomoyo_quota_for_query && tomoyo_query_memory_size + len +
+	    sizeof(*entry) >= tomoyo_quota_for_query) {
+		quota_exceeded = true;
+	} else {
+		tomoyo_query_memory_size += len + sizeof(*entry);
+		entry->serial = tomoyo_serial++;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (quota_exceeded)
+		goto out;
+	pos = snprintf(entry->query, len - 1, "Q%u-%hu\n%s",
+		       entry->serial, r->retry, header);
+	kfree(header);
+	header = NULL;
+	va_start(args, fmt);
+	vsnprintf(entry->query + pos, len - 1 - pos, fmt, args);
+	entry->query_len = strlen(entry->query) + 1;
+	va_end(args);
+	spin_lock(&tomoyo_query_list_lock);
+	list_add_tail(&entry->list, &tomoyo_query_list);
+	spin_unlock(&tomoyo_query_list_lock);
+	/* Give 10 seconds for supervisor's opinion. */
+	for (entry->timer = 0;
+	     atomic_read(&tomoyo_query_observers) && entry->timer < 100;
+	     entry->timer++) {
+		wake_up(&tomoyo_query_wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ / 10);
+		if (entry->answer)
+			break;
+	}
+	spin_lock(&tomoyo_query_list_lock);
+	list_del(&entry->list);
+	tomoyo_query_memory_size -= len + sizeof(*entry);
+	spin_unlock(&tomoyo_query_list_lock);
+	switch (entry->answer) {
+	case 3: /* Asked to retry by administrator. */
+		error = TOMOYO_RETRY_REQUEST;
+		r->retry++;
+		break;
+	case 1:
+		/* Granted by administrator. */
+		error = 0;
+		break;
+	case 0:
+		/* Timed out. */
+		break;
+	default:
+		/* Rejected by administrator. */
+		break;
+	}
+ out:
+	if (entry)
+		kfree(entry->query);
+	kfree(entry);
+	kfree(header);
+	return error;
 }
 
 /**
- * tomoyo_load_policy - Run external policy loader to load policy.
+ * tomoyo_poll_query - poll() for /sys/kernel/security/tomoyo/query.
  *
- * @filename: The program about to start.
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
  *
- * This function checks whether @filename is /sbin/init , and if so
- * invoke /sbin/tomoyo-init and wait for the termination of /sbin/tomoyo-init
- * and then continues invocation of /sbin/init.
- * /sbin/tomoyo-init reads policy files in /etc/tomoyo/ directory and
- * writes to /sys/kernel/security/tomoyo/ interfaces.
+ * Returns POLLIN | POLLRDNORM when ready to read, 0 otherwise.
  *
- * Returns nothing.
+ * Waits for access requests which violated policy in enforcing mode.
  */
-void tomoyo_load_policy(const char *filename)
+static int tomoyo_poll_query(struct file *file, poll_table *wait)
 {
-	char *argv[2];
-	char *envp[3];
+	struct list_head *tmp;
+	bool found = false;
+	u8 i;
+	for (i = 0; i < 2; i++) {
+		spin_lock(&tomoyo_query_list_lock);
+		list_for_each(tmp, &tomoyo_query_list) {
+			struct tomoyo_query *ptr =
+				list_entry(tmp, typeof(*ptr), list);
+			if (ptr->answer)
+				continue;
+			found = true;
+			break;
+		}
+		spin_unlock(&tomoyo_query_list_lock);
+		if (found)
+			return POLLIN | POLLRDNORM;
+		if (i)
+			break;
+		poll_wait(file, &tomoyo_query_wait, wait);
+	}
+	return 0;
+}
 
-	if (tomoyo_policy_loaded)
+/**
+ * tomoyo_read_query - Read access requests which violated policy in enforcing mode.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ */
+static void tomoyo_read_query(struct tomoyo_io_buffer *head)
+{
+	struct list_head *tmp;
+	int pos = 0;
+	int len = 0;
+	char *buf;
+	if (head->r.w_pos)
 		return;
-	/*
-	 * Check filename is /sbin/init or /sbin/tomoyo-start.
-	 * /sbin/tomoyo-start is a dummy filename in case where /sbin/init can't
-	 * be passed.
-	 * You can create /sbin/tomoyo-start by
-	 * "ln -s /bin/true /sbin/tomoyo-start".
-	 */
-	if (strcmp(filename, "/sbin/init") &&
-	    strcmp(filename, "/sbin/tomoyo-start"))
+	if (head->read_buf) {
+		kfree(head->read_buf);
+		head->read_buf = NULL;
+	}
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->answer)
+			continue;
+		if (pos++ != head->r.query_index)
+			continue;
+		len = ptr->query_len;
+		break;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (!len) {
+		head->r.query_index = 0;
 		return;
-	if (!tomoyo_policy_loader_exists())
+	}
+	buf = kzalloc(len, GFP_NOFS);
+	if (!buf)
 		return;
+	pos = 0;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->answer)
+			continue;
+		if (pos++ != head->r.query_index)
+			continue;
+		/*
+		 * Some query can be skipped because tomoyo_query_list
+		 * can change, but I don't care.
+		 */
+		if (len == ptr->query_len)
+			memmove(buf, ptr->query, len);
+		break;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (buf[0]) {
+		head->read_buf = buf;
+		head->r.w[head->r.w_pos++] = buf;
+		head->r.query_index++;
+	} else {
+		kfree(buf);
+	}
+}
 
-	printk(KERN_INFO "Calling %s to load policy. Please wait.\n",
-	       tomoyo_loader);
-	argv[0] = (char *) tomoyo_loader;
-	argv[1] = NULL;
-	envp[0] = "HOME=/";
-	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-	envp[2] = NULL;
-	call_usermodehelper(argv[0], argv, envp, 1);
-
-	printk(KERN_INFO "TOMOYO: 2.2.0   2009/04/01\n");
-	printk(KERN_INFO "Mandatory Access Control activated.\n");
-	tomoyo_policy_loaded = true;
-	{ /* Check all profiles currently assigned to domains are defined. */
-		struct tomoyo_domain_info *domain;
-		list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-			const u8 profile = domain->profile;
-			if (tomoyo_profile_ptr[profile])
-				continue;
-			panic("Profile %u (used by '%s') not defined.\n",
-			      profile, domain->domainname->name);
-		}
+/**
+ * tomoyo_write_answer - Write the supervisor's decision.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0 on success, -EINVAL otherwise.
+ */
+static int tomoyo_write_answer(struct tomoyo_io_buffer *head)
+{
+	char *data = head->write_buf;
+	struct list_head *tmp;
+	unsigned int serial;
+	unsigned int answer;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		ptr->timer = 0;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (sscanf(data, "A%u=%u", &serial, &answer) != 2)
+		return -EINVAL;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->serial != serial)
+			continue;
+		if (!ptr->answer)
+			ptr->answer = answer;
+		break;
 	}
+	spin_unlock(&tomoyo_query_list_lock);
+	return 0;
 }
 
 /**
@@ -1913,13 +1744,12 @@ void tomoyo_load_policy(const char *filename)
  *
  * Returns version information.
  */
-static int tomoyo_read_version(struct tomoyo_io_buffer *head)
+static void tomoyo_read_version(struct tomoyo_io_buffer *head)
 {
-	if (!head->read_eof) {
-		tomoyo_io_printf(head, "2.2.0");
-		head->read_eof = true;
+	if (!head->r.eof) {
+		tomoyo_io_printf(head, "2.3.0");
+		head->r.eof = true;
 	}
-	return 0;
 }
 
 /**
@@ -1929,18 +1759,17 @@ static int tomoyo_read_version(struct tomoyo_io_buffer *head)
  *
  * Returns the current process's domainname.
  */
-static int tomoyo_read_self_domain(struct tomoyo_io_buffer *head)
+static void tomoyo_read_self_domain(struct tomoyo_io_buffer *head)
 {
-	if (!head->read_eof) {
+	if (!head->r.eof) {
 		/*
 		 * tomoyo_domain()->domainname != NULL
 		 * because every process belongs to a domain and
 		 * the domain's name cannot be NULL.
 		 */
 		tomoyo_io_printf(head, "%s", tomoyo_domain()->domainname->name);
-		head->read_eof = true;
+		head->r.eof = true;
 	}
-	return 0;
 }
 
 /**
@@ -1953,23 +1782,24 @@ static int tomoyo_read_self_domain(struct tomoyo_io_buffer *head)
  *
  * Caller acquires tomoyo_read_lock().
  */
-static int tomoyo_open_control(const u8 type, struct file *file)
+int tomoyo_open_control(const u8 type, struct file *file)
 {
 	struct tomoyo_io_buffer *head = kzalloc(sizeof(*head), GFP_NOFS);
 
 	if (!head)
 		return -ENOMEM;
 	mutex_init(&head->io_sem);
+	head->type = type;
 	switch (type) {
 	case TOMOYO_DOMAINPOLICY:
 		/* /sys/kernel/security/tomoyo/domain_policy */
-		head->write = tomoyo_write_domain_policy;
-		head->read = tomoyo_read_domain_policy;
+		head->write = tomoyo_write_domain;
+		head->read = tomoyo_read_domain;
 		break;
 	case TOMOYO_EXCEPTIONPOLICY:
 		/* /sys/kernel/security/tomoyo/exception_policy */
-		head->write = tomoyo_write_exception_policy;
-		head->read = tomoyo_read_exception_policy;
+		head->write = tomoyo_write_exception;
+		head->read = tomoyo_read_exception;
 		break;
 	case TOMOYO_SELFDOMAIN:
 		/* /sys/kernel/security/tomoyo/self_domain */
@@ -2001,10 +1831,15 @@ static int tomoyo_open_control(const u8 type, struct file *file)
 		head->write = tomoyo_write_profile;
 		head->read = tomoyo_read_profile;
 		break;
+	case TOMOYO_QUERY: /* /sys/kernel/security/tomoyo/query */
+		head->poll = tomoyo_poll_query;
+		head->write = tomoyo_write_answer;
+		head->read = tomoyo_read_query;
+		break;
 	case TOMOYO_MANAGER:
 		/* /sys/kernel/security/tomoyo/manager */
-		head->write = tomoyo_write_manager_policy;
-		head->read = tomoyo_read_manager_policy;
+		head->write = tomoyo_write_manager;
+		head->read = tomoyo_read_manager;
 		break;
 	}
 	if (!(file->f_mode & FMODE_READ)) {
@@ -2013,7 +1848,9 @@ static int tomoyo_open_control(const u8 type, struct file *file)
 		 * for reading.
 		 */
 		head->read = NULL;
-	} else {
+		head->poll = NULL;
+	} else if (!head->poll) {
+		/* Don't allocate read_buf for poll() access. */
 		if (!head->readbuf_size)
 			head->readbuf_size = 4096 * 2;
 		head->read_buf = kzalloc(head->readbuf_size, GFP_NOFS);
@@ -2037,7 +1874,8 @@ static int tomoyo_open_control(const u8 type, struct file *file)
 			return -ENOMEM;
 		}
 	}
-	head->reader_idx = tomoyo_read_lock();
+	if (type != TOMOYO_QUERY)
+		head->reader_idx = tomoyo_read_lock();
 	file->private_data = head;
 	/*
 	 * Call the handler now if the file is
@@ -2048,10 +1886,35 @@ static int tomoyo_open_control(const u8 type, struct file *file)
 	 */
 	if (type == TOMOYO_SELFDOMAIN)
 		tomoyo_read_control(file, NULL, 0);
+	/*
+	 * If the file is /sys/kernel/security/tomoyo/query , increment the
+	 * observer counter.
+	 * The obserber counter is used by tomoyo_supervisor() to see if
+	 * there is some process monitoring /sys/kernel/security/tomoyo/query.
+	 */
+	else if (type == TOMOYO_QUERY)
+		atomic_inc(&tomoyo_query_observers);
 	return 0;
 }
 
 /**
+ * tomoyo_poll_control - poll() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
+ *
+ * Waits for read readiness.
+ * /sys/kernel/security/tomoyo/query is handled by /usr/sbin/tomoyo-queryd .
+ */
+int tomoyo_poll_control(struct file *file, poll_table *wait)
+{
+	struct tomoyo_io_buffer *head = file->private_data;
+	if (!head->poll)
+		return -ENOSYS;
+	return head->poll(file, wait);
+}
+
+/**
  * tomoyo_read_control - read() for /sys/kernel/security/tomoyo/ interface.
  *
  * @file:       Pointer to "struct file".
@@ -2062,36 +1925,23 @@ static int tomoyo_open_control(const u8 type, struct file *file)
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_control(struct file *file, char __user *buffer,
-			       const int buffer_len)
+int tomoyo_read_control(struct file *file, char __user *buffer,
+			const int buffer_len)
 {
-	int len = 0;
+	int len;
 	struct tomoyo_io_buffer *head = file->private_data;
-	char *cp;
 
 	if (!head->read)
 		return -ENOSYS;
 	if (mutex_lock_interruptible(&head->io_sem))
 		return -EINTR;
-	/* Call the policy handler. */
-	len = head->read(head);
-	if (len < 0)
-		goto out;
-	/* Write to buffer. */
-	len = head->read_avail;
-	if (len > buffer_len)
-		len = buffer_len;
-	if (!len)
-		goto out;
-	/* head->read_buf changes by some functions. */
-	cp = head->read_buf;
-	if (copy_to_user(buffer, cp, len)) {
-		len = -EFAULT;
-		goto out;
-	}
-	head->read_avail -= len;
-	memmove(cp, cp + len, head->read_avail);
- out:
+	head->read_user_buf = buffer;
+	head->read_user_buf_avail = buffer_len;
+	if (tomoyo_flush(head))
+		/* Call the policy handler. */
+		head->read(head);
+	tomoyo_flush(head);
+	len = head->read_user_buf - buffer;
 	mutex_unlock(&head->io_sem);
 	return len;
 }
@@ -2107,8 +1957,8 @@ static int tomoyo_read_control(struct file *file, char __user *buffer,
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_control(struct file *file, const char __user *buffer,
-				const int buffer_len)
+int tomoyo_write_control(struct file *file, const char __user *buffer,
+			 const int buffer_len)
 {
 	struct tomoyo_io_buffer *head = file->private_data;
 	int error = buffer_len;
@@ -2121,8 +1971,7 @@ static int tomoyo_write_control(struct file *file, const char __user *buffer,
 		return -EFAULT;
 	/* Don't allow updating policies by non manager programs. */
 	if (head->write != tomoyo_write_pid &&
-	    head->write != tomoyo_write_domain_policy &&
-	    !tomoyo_is_policy_manager())
+	    head->write != tomoyo_write_domain && !tomoyo_manager())
 		return -EPERM;
 	if (mutex_lock_interruptible(&head->io_sem))
 		return -EINTR;
@@ -2159,12 +2008,19 @@ static int tomoyo_write_control(struct file *file, const char __user *buffer,
  *
  * Caller looses tomoyo_read_lock().
  */
-static int tomoyo_close_control(struct file *file)
+int tomoyo_close_control(struct file *file)
 {
 	struct tomoyo_io_buffer *head = file->private_data;
 	const bool is_write = !!head->write_buf;
 
-	tomoyo_read_unlock(head->reader_idx);
+	/*
+	 * If the file is /sys/kernel/security/tomoyo/query , decrement the
+	 * observer counter.
+	 */
+	if (head->type == TOMOYO_QUERY)
+		atomic_dec(&tomoyo_query_observers);
+	else
+		tomoyo_read_unlock(head->reader_idx);
 	/* Release memory used for policy I/O. */
 	kfree(head->read_buf);
 	head->read_buf = NULL;
@@ -2179,129 +2035,25 @@ static int tomoyo_close_control(struct file *file)
 }
 
 /**
- * tomoyo_open - open() for /sys/kernel/security/tomoyo/ interface.
- *
- * @inode: Pointer to "struct inode".
- * @file:  Pointer to "struct file".
- *
- * Returns 0 on success, negative value otherwise.
- */
-static int tomoyo_open(struct inode *inode, struct file *file)
-{
-	const int key = ((u8 *) file->f_path.dentry->d_inode->i_private)
-		- ((u8 *) NULL);
-	return tomoyo_open_control(key, file);
-}
-
-/**
- * tomoyo_release - close() for /sys/kernel/security/tomoyo/ interface.
- *
- * @inode: Pointer to "struct inode".
- * @file:  Pointer to "struct file".
- *
- * Returns 0 on success, negative value otherwise.
- */
-static int tomoyo_release(struct inode *inode, struct file *file)
-{
-	return tomoyo_close_control(file);
-}
-
-/**
- * tomoyo_read - read() for /sys/kernel/security/tomoyo/ interface.
- *
- * @file:  Pointer to "struct file".
- * @buf:   Pointer to buffer.
- * @count: Size of @buf.
- * @ppos:  Unused.
- *
- * Returns bytes read on success, negative value otherwise.
+ * tomoyo_check_profile - Check all profiles currently assigned to domains are defined.
  */
-static ssize_t tomoyo_read(struct file *file, char __user *buf, size_t count,
-			   loff_t *ppos)
+void tomoyo_check_profile(void)
 {
-	return tomoyo_read_control(file, buf, count);
-}
-
-/**
- * tomoyo_write - write() for /sys/kernel/security/tomoyo/ interface.
- *
- * @file:  Pointer to "struct file".
- * @buf:   Pointer to buffer.
- * @count: Size of @buf.
- * @ppos:  Unused.
- *
- * Returns @count on success, negative value otherwise.
- */
-static ssize_t tomoyo_write(struct file *file, const char __user *buf,
-			    size_t count, loff_t *ppos)
-{
-	return tomoyo_write_control(file, buf, count);
-}
-
-/*
- * tomoyo_operations is a "struct file_operations" which is used for handling
- * /sys/kernel/security/tomoyo/ interface.
- *
- * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR).
- * See tomoyo_io_buffer for internals.
- */
-static const struct file_operations tomoyo_operations = {
-	.open    = tomoyo_open,
-	.release = tomoyo_release,
-	.read    = tomoyo_read,
-	.write   = tomoyo_write,
-};
-
-/**
- * tomoyo_create_entry - Create interface files under /sys/kernel/security/tomoyo/ directory.
- *
- * @name:   The name of the interface file.
- * @mode:   The permission of the interface file.
- * @parent: The parent directory.
- * @key:    Type of interface.
- *
- * Returns nothing.
- */
-static void __init tomoyo_create_entry(const char *name, const mode_t mode,
-				       struct dentry *parent, const u8 key)
-{
-	securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,
-			       &tomoyo_operations);
-}
-
-/**
- * tomoyo_initerface_init - Initialize /sys/kernel/security/tomoyo/ interface.
- *
- * Returns 0.
- */
-static int __init tomoyo_initerface_init(void)
-{
-	struct dentry *tomoyo_dir;
-
-	/* Don't create securityfs entries unless registered. */
-	if (current_cred()->security != &tomoyo_kernel_domain)
-		return 0;
-
-	tomoyo_dir = securityfs_create_dir("tomoyo", NULL);
-	tomoyo_create_entry("domain_policy",    0600, tomoyo_dir,
-			    TOMOYO_DOMAINPOLICY);
-	tomoyo_create_entry("exception_policy", 0600, tomoyo_dir,
-			    TOMOYO_EXCEPTIONPOLICY);
-	tomoyo_create_entry("self_domain",      0400, tomoyo_dir,
-			    TOMOYO_SELFDOMAIN);
-	tomoyo_create_entry(".domain_status",   0600, tomoyo_dir,
-			    TOMOYO_DOMAIN_STATUS);
-	tomoyo_create_entry(".process_status",  0600, tomoyo_dir,
-			    TOMOYO_PROCESS_STATUS);
-	tomoyo_create_entry("meminfo",          0600, tomoyo_dir,
-			    TOMOYO_MEMINFO);
-	tomoyo_create_entry("profile",          0600, tomoyo_dir,
-			    TOMOYO_PROFILE);
-	tomoyo_create_entry("manager",          0600, tomoyo_dir,
-			    TOMOYO_MANAGER);
-	tomoyo_create_entry("version",          0400, tomoyo_dir,
-			    TOMOYO_VERSION);
-	return 0;
+	struct tomoyo_domain_info *domain;
+	const int idx = tomoyo_read_lock();
+	tomoyo_policy_loaded = true;
+	/* Check all profiles currently assigned to domains are defined. */
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+		const u8 profile = domain->profile;
+		if (tomoyo_profile_ptr[profile])
+			continue;
+		panic("Profile %u (used by '%s') not defined.\n",
+		      profile, domain->domainname->name);
+	}
+	tomoyo_read_unlock(idx);
+	if (tomoyo_profile_version != 20090903)
+		panic("Profile version %u is not supported.\n",
+		      tomoyo_profile_version);
+	printk(KERN_INFO "TOMOYO: 2.3.0\n");
+	printk(KERN_INFO "Mandatory Access Control activated.\n");
 }
-
-fs_initcall(tomoyo_initerface_init);
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 9f1ae5e3ba5..04454cb7b24 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -20,6 +20,7 @@
 #include <linux/mount.h>
 #include <linux/list.h>
 #include <linux/cred.h>
+#include <linux/poll.h>
 struct linux_binprm;
 
 /********** Constants definitions. **********/
@@ -32,20 +33,44 @@ struct linux_binprm;
 #define TOMOYO_HASH_BITS  8
 #define TOMOYO_MAX_HASH (1u<<TOMOYO_HASH_BITS)
 
-/*
- * This is the max length of a token.
- *
- * A token consists of only ASCII printable characters.
- * Non printable characters in a token is represented in \ooo style
- * octal string. Thus, \ itself is represented as \\.
- */
-#define TOMOYO_MAX_PATHNAME_LEN 4000
+#define TOMOYO_EXEC_TMPSIZE     4096
 
 /* Profile number is an integer between 0 and 255. */
 #define TOMOYO_MAX_PROFILES 256
 
+enum tomoyo_mode_index {
+	TOMOYO_CONFIG_DISABLED,
+	TOMOYO_CONFIG_LEARNING,
+	TOMOYO_CONFIG_PERMISSIVE,
+	TOMOYO_CONFIG_ENFORCING,
+	TOMOYO_CONFIG_USE_DEFAULT = 255
+};
+
+enum tomoyo_policy_id {
+	TOMOYO_ID_GROUP,
+	TOMOYO_ID_PATH_GROUP,
+	TOMOYO_ID_NUMBER_GROUP,
+	TOMOYO_ID_TRANSITION_CONTROL,
+	TOMOYO_ID_AGGREGATOR,
+	TOMOYO_ID_GLOBALLY_READABLE,
+	TOMOYO_ID_PATTERN,
+	TOMOYO_ID_NO_REWRITE,
+	TOMOYO_ID_MANAGER,
+	TOMOYO_ID_NAME,
+	TOMOYO_ID_ACL,
+	TOMOYO_ID_DOMAIN,
+	TOMOYO_MAX_POLICY
+};
+
+enum tomoyo_group_id {
+	TOMOYO_PATH_GROUP,
+	TOMOYO_NUMBER_GROUP,
+	TOMOYO_MAX_GROUP
+};
+
 /* Keywords for ACLs. */
-#define TOMOYO_KEYWORD_ALIAS                     "alias "
+#define TOMOYO_KEYWORD_AGGREGATOR                "aggregator "
+#define TOMOYO_KEYWORD_ALLOW_MOUNT               "allow_mount "
 #define TOMOYO_KEYWORD_ALLOW_READ                "allow_read "
 #define TOMOYO_KEYWORD_DELETE                    "delete "
 #define TOMOYO_KEYWORD_DENY_REWRITE              "deny_rewrite "
@@ -55,36 +80,51 @@ struct linux_binprm;
 #define TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN      "no_initialize_domain "
 #define TOMOYO_KEYWORD_NO_KEEP_DOMAIN            "no_keep_domain "
 #define TOMOYO_KEYWORD_PATH_GROUP                "path_group "
+#define TOMOYO_KEYWORD_NUMBER_GROUP              "number_group "
 #define TOMOYO_KEYWORD_SELECT                    "select "
 #define TOMOYO_KEYWORD_USE_PROFILE               "use_profile "
 #define TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ  "ignore_global_allow_read"
+#define TOMOYO_KEYWORD_QUOTA_EXCEEDED            "quota_exceeded"
+#define TOMOYO_KEYWORD_TRANSITION_FAILED         "transition_failed"
 /* A domain definition starts with <kernel>. */
 #define TOMOYO_ROOT_NAME                         "<kernel>"
 #define TOMOYO_ROOT_NAME_LEN                     (sizeof(TOMOYO_ROOT_NAME) - 1)
 
-/* Index numbers for Access Controls. */
-enum tomoyo_mac_index {
-	TOMOYO_MAC_FOR_FILE,  /* domain_policy.conf */
-	TOMOYO_MAX_ACCEPT_ENTRY,
-	TOMOYO_VERBOSE,
-	TOMOYO_MAX_CONTROL_INDEX
+/* Value type definition. */
+#define TOMOYO_VALUE_TYPE_INVALID     0
+#define TOMOYO_VALUE_TYPE_DECIMAL     1
+#define TOMOYO_VALUE_TYPE_OCTAL       2
+#define TOMOYO_VALUE_TYPE_HEXADECIMAL 3
+
+enum tomoyo_transition_type {
+	/* Do not change this order, */
+	TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE,
+	TOMOYO_TRANSITION_CONTROL_INITIALIZE,
+	TOMOYO_TRANSITION_CONTROL_NO_KEEP,
+	TOMOYO_TRANSITION_CONTROL_KEEP,
+	TOMOYO_MAX_TRANSITION_TYPE
 };
 
 /* Index numbers for Access Controls. */
 enum tomoyo_acl_entry_type_index {
 	TOMOYO_TYPE_PATH_ACL,
 	TOMOYO_TYPE_PATH2_ACL,
+	TOMOYO_TYPE_PATH_NUMBER_ACL,
+	TOMOYO_TYPE_MKDEV_ACL,
+	TOMOYO_TYPE_MOUNT_ACL,
 };
 
 /* Index numbers for File Controls. */
 
 /*
- * TYPE_READ_WRITE_ACL is special. TYPE_READ_WRITE_ACL is automatically set
- * if both TYPE_READ_ACL and TYPE_WRITE_ACL are set. Both TYPE_READ_ACL and
- * TYPE_WRITE_ACL are automatically set if TYPE_READ_WRITE_ACL is set.
- * TYPE_READ_WRITE_ACL is automatically cleared if either TYPE_READ_ACL or
- * TYPE_WRITE_ACL is cleared. Both TYPE_READ_ACL and TYPE_WRITE_ACL are
- * automatically cleared if TYPE_READ_WRITE_ACL is cleared.
+ * TOMOYO_TYPE_READ_WRITE is special. TOMOYO_TYPE_READ_WRITE is automatically
+ * set if both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are set.
+ * Both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are automatically set if
+ * TOMOYO_TYPE_READ_WRITE is set.
+ * TOMOYO_TYPE_READ_WRITE is automatically cleared if either TOMOYO_TYPE_READ
+ * or TOMOYO_TYPE_WRITE is cleared.
+ * Both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are automatically cleared if
+ * TOMOYO_TYPE_READ_WRITE is cleared.
  */
 
 enum tomoyo_path_acl_index {
@@ -92,27 +132,24 @@ enum tomoyo_path_acl_index {
 	TOMOYO_TYPE_EXECUTE,
 	TOMOYO_TYPE_READ,
 	TOMOYO_TYPE_WRITE,
-	TOMOYO_TYPE_CREATE,
 	TOMOYO_TYPE_UNLINK,
-	TOMOYO_TYPE_MKDIR,
 	TOMOYO_TYPE_RMDIR,
-	TOMOYO_TYPE_MKFIFO,
-	TOMOYO_TYPE_MKSOCK,
-	TOMOYO_TYPE_MKBLOCK,
-	TOMOYO_TYPE_MKCHAR,
 	TOMOYO_TYPE_TRUNCATE,
 	TOMOYO_TYPE_SYMLINK,
 	TOMOYO_TYPE_REWRITE,
-	TOMOYO_TYPE_IOCTL,
-	TOMOYO_TYPE_CHMOD,
-	TOMOYO_TYPE_CHOWN,
-	TOMOYO_TYPE_CHGRP,
 	TOMOYO_TYPE_CHROOT,
-	TOMOYO_TYPE_MOUNT,
 	TOMOYO_TYPE_UMOUNT,
 	TOMOYO_MAX_PATH_OPERATION
 };
 
+#define TOMOYO_RW_MASK ((1 << TOMOYO_TYPE_READ) | (1 << TOMOYO_TYPE_WRITE))
+
+enum tomoyo_mkdev_acl_index {
+	TOMOYO_TYPE_MKBLOCK,
+	TOMOYO_TYPE_MKCHAR,
+	TOMOYO_MAX_MKDEV_OPERATION
+};
+
 enum tomoyo_path2_acl_index {
 	TOMOYO_TYPE_LINK,
 	TOMOYO_TYPE_RENAME,
@@ -120,6 +157,18 @@ enum tomoyo_path2_acl_index {
 	TOMOYO_MAX_PATH2_OPERATION
 };
 
+enum tomoyo_path_number_acl_index {
+	TOMOYO_TYPE_CREATE,
+	TOMOYO_TYPE_MKDIR,
+	TOMOYO_TYPE_MKFIFO,
+	TOMOYO_TYPE_MKSOCK,
+	TOMOYO_TYPE_IOCTL,
+	TOMOYO_TYPE_CHMOD,
+	TOMOYO_TYPE_CHOWN,
+	TOMOYO_TYPE_CHGRP,
+	TOMOYO_MAX_PATH_NUMBER_OPERATION
+};
+
 enum tomoyo_securityfs_interface_index {
 	TOMOYO_DOMAINPOLICY,
 	TOMOYO_EXCEPTIONPOLICY,
@@ -129,20 +178,109 @@ enum tomoyo_securityfs_interface_index {
 	TOMOYO_SELFDOMAIN,
 	TOMOYO_VERSION,
 	TOMOYO_PROFILE,
+	TOMOYO_QUERY,
 	TOMOYO_MANAGER
 };
 
+enum tomoyo_mac_index {
+	TOMOYO_MAC_FILE_EXECUTE,
+	TOMOYO_MAC_FILE_OPEN,
+	TOMOYO_MAC_FILE_CREATE,
+	TOMOYO_MAC_FILE_UNLINK,
+	TOMOYO_MAC_FILE_MKDIR,
+	TOMOYO_MAC_FILE_RMDIR,
+	TOMOYO_MAC_FILE_MKFIFO,
+	TOMOYO_MAC_FILE_MKSOCK,
+	TOMOYO_MAC_FILE_TRUNCATE,
+	TOMOYO_MAC_FILE_SYMLINK,
+	TOMOYO_MAC_FILE_REWRITE,
+	TOMOYO_MAC_FILE_MKBLOCK,
+	TOMOYO_MAC_FILE_MKCHAR,
+	TOMOYO_MAC_FILE_LINK,
+	TOMOYO_MAC_FILE_RENAME,
+	TOMOYO_MAC_FILE_CHMOD,
+	TOMOYO_MAC_FILE_CHOWN,
+	TOMOYO_MAC_FILE_CHGRP,
+	TOMOYO_MAC_FILE_IOCTL,
+	TOMOYO_MAC_FILE_CHROOT,
+	TOMOYO_MAC_FILE_MOUNT,
+	TOMOYO_MAC_FILE_UMOUNT,
+	TOMOYO_MAC_FILE_PIVOT_ROOT,
+	TOMOYO_MAX_MAC_INDEX
+};
+
+enum tomoyo_mac_category_index {
+	TOMOYO_MAC_CATEGORY_FILE,
+	TOMOYO_MAX_MAC_CATEGORY_INDEX
+};
+
+#define TOMOYO_RETRY_REQUEST 1 /* Retry this request. */
+
 /********** Structure definitions. **********/
 
 /*
- * tomoyo_page_buffer is a structure which is used for holding a pathname
- * obtained from "struct dentry" and "struct vfsmount" pair.
- * As of now, it is 4096 bytes. If users complain that 4096 bytes is too small
- * (because TOMOYO escapes non ASCII printable characters using \ooo format),
- * we will make the buffer larger.
+ * tomoyo_acl_head is a structure which is used for holding elements not in
+ * domain policy.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_policy_list[] .
+ *  (2) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
  */
-struct tomoyo_page_buffer {
-	char buffer[4096];
+struct tomoyo_acl_head {
+	struct list_head list;
+	bool is_deleted;
+} __packed;
+
+/*
+ * tomoyo_request_info is a structure which is used for holding
+ *
+ * (1) Domain information of current process.
+ * (2) How many retries are made for this request.
+ * (3) Profile number used for this request.
+ * (4) Access control mode of the profile.
+ */
+struct tomoyo_request_info {
+	struct tomoyo_domain_info *domain;
+	/* For holding parameters. */
+	union {
+		struct {
+			const struct tomoyo_path_info *filename;
+			/* For using wildcards at tomoyo_find_next_domain(). */
+			const struct tomoyo_path_info *matched_path;
+			u8 operation;
+		} path;
+		struct {
+			const struct tomoyo_path_info *filename1;
+			const struct tomoyo_path_info *filename2;
+			u8 operation;
+		} path2;
+		struct {
+			const struct tomoyo_path_info *filename;
+			unsigned int mode;
+			unsigned int major;
+			unsigned int minor;
+			u8 operation;
+		} mkdev;
+		struct {
+			const struct tomoyo_path_info *filename;
+			unsigned long number;
+			u8 operation;
+		} path_number;
+		struct {
+			const struct tomoyo_path_info *type;
+			const struct tomoyo_path_info *dir;
+			const struct tomoyo_path_info *dev;
+			unsigned long flags;
+			int need_dev;
+		} mount;
+	} param;
+	u8 param_type;
+	bool granted;
+	u8 retry;
+	u8 profile;
+	u8 mode; /* One of tomoyo_mode_index . */
+	u8 type;
 };
 
 /*
@@ -174,45 +312,31 @@ struct tomoyo_path_info {
 };
 
 /*
- * tomoyo_name_entry is a structure which is used for linking
+ * tomoyo_name is a structure which is used for linking
  * "struct tomoyo_path_info" into tomoyo_name_list .
  */
-struct tomoyo_name_entry {
+struct tomoyo_name {
 	struct list_head list;
 	atomic_t users;
 	struct tomoyo_path_info entry;
 };
 
-/*
- * tomoyo_path_info_with_data is a structure which is used for holding a
- * pathname obtained from "struct dentry" and "struct vfsmount" pair.
- *
- * "struct tomoyo_path_info_with_data" consists of "struct tomoyo_path_info"
- * and buffer for the pathname, while "struct tomoyo_page_buffer" consists of
- * buffer for the pathname only.
- *
- * "struct tomoyo_path_info_with_data" is intended to allow TOMOYO to release
- * both "struct tomoyo_path_info" and buffer for the pathname by single kfree()
- * so that we don't need to return two pointers to the caller. If the caller
- * puts "struct tomoyo_path_info" on stack memory, we will be able to remove
- * "struct tomoyo_path_info_with_data".
- */
-struct tomoyo_path_info_with_data {
-	/* Keep "head" first, for this pointer is passed to kfree(). */
-	struct tomoyo_path_info head;
-	char barrier1[16]; /* Safeguard for overrun. */
-	char body[TOMOYO_MAX_PATHNAME_LEN];
-	char barrier2[16]; /* Safeguard for overrun. */
-};
-
 struct tomoyo_name_union {
 	const struct tomoyo_path_info *filename;
-	struct tomoyo_path_group *group;
+	struct tomoyo_group *group;
 	u8 is_group;
 };
 
-/* Structure for "path_group" directive. */
-struct tomoyo_path_group {
+struct tomoyo_number_union {
+	unsigned long values[2];
+	struct tomoyo_group *group;
+	u8 min_type;
+	u8 max_type;
+	u8 is_group;
+};
+
+/* Structure for "path_group"/"number_group" directive. */
+struct tomoyo_group {
 	struct list_head list;
 	const struct tomoyo_path_info *group_name;
 	struct list_head member_list;
@@ -220,28 +344,35 @@ struct tomoyo_path_group {
 };
 
 /* Structure for "path_group" directive. */
-struct tomoyo_path_group_member {
-	struct list_head list;
-	bool is_deleted;
+struct tomoyo_path_group {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *member_name;
 };
 
+/* Structure for "number_group" directive. */
+struct tomoyo_number_group {
+	struct tomoyo_acl_head head;
+	struct tomoyo_number_union number;
+};
+
 /*
  * tomoyo_acl_info is a structure which is used for holding
  *
  *  (1) "list" which is linked to the ->acl_info_list of
  *      "struct tomoyo_domain_info"
- *  (2) "type" which tells type of the entry (either
- *      "struct tomoyo_path_acl" or "struct tomoyo_path2_acl").
+ *  (2) "is_deleted" is a bool which is true if this domain is marked as
+ *      "deleted", false otherwise.
+ *  (3) "type" which tells type of the entry.
  *
  * Packing "struct tomoyo_acl_info" allows
- * "struct tomoyo_path_acl" to embed "u8" + "u16" and
- * "struct tomoyo_path2_acl" to embed "u8"
- * without enlarging their structure size.
+ * "struct tomoyo_path_acl" to embed "u16" and "struct tomoyo_path2_acl"
+ * "struct tomoyo_path_number_acl" "struct tomoyo_mkdev_acl" to embed
+ * "u8" without enlarging their structure size.
  */
 struct tomoyo_acl_info {
 	struct list_head list;
-	u8 type;
+	bool is_deleted;
+	u8 type; /* = one of values in "enum tomoyo_acl_entry_type_index". */
 } __packed;
 
 /*
@@ -299,20 +430,62 @@ struct tomoyo_domain_info {
  *  (3) "name" is the pathname.
  *
  * Directives held by this structure are "allow_read/write", "allow_execute",
- * "allow_read", "allow_write", "allow_create", "allow_unlink", "allow_mkdir",
- * "allow_rmdir", "allow_mkfifo", "allow_mksock", "allow_mkblock",
- * "allow_mkchar", "allow_truncate", "allow_symlink", "allow_rewrite",
- * "allow_chmod", "allow_chown", "allow_chgrp", "allow_chroot", "allow_mount"
- * and "allow_unmount".
+ * "allow_read", "allow_write", "allow_unlink", "allow_rmdir",
+ * "allow_truncate", "allow_symlink", "allow_rewrite", "allow_chroot" and
+ * "allow_unmount".
  */
 struct tomoyo_path_acl {
 	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_PATH_ACL */
-	u8 perm_high;
 	u16 perm;
 	struct tomoyo_name_union name;
 };
 
 /*
+ * tomoyo_path_number_acl is a structure which is used for holding an
+ * entry with one pathname and one number operation.
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "name" is the pathname.
+ *  (4) "number" is the numeric value.
+ *
+ * Directives held by this structure are "allow_create", "allow_mkdir",
+ * "allow_ioctl", "allow_mkfifo", "allow_mksock", "allow_chmod", "allow_chown"
+ * and "allow_chgrp".
+ *
+ */
+struct tomoyo_path_number_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_PATH_NUMBER_ACL */
+	u8 perm;
+	struct tomoyo_name_union name;
+	struct tomoyo_number_union number;
+};
+
+/*
+ * tomoyo_mkdev_acl is a structure which is used for holding an
+ * entry with one pathname and three numbers operation.
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "mode" is the create mode.
+ *  (4) "major" is the major number of device node.
+ *  (5) "minor" is the minor number of device node.
+ *
+ * Directives held by this structure are "allow_mkchar", "allow_mkblock".
+ *
+ */
+struct tomoyo_mkdev_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_MKDEV_ACL */
+	u8 perm;
+	struct tomoyo_name_union name;
+	struct tomoyo_number_union mode;
+	struct tomoyo_number_union major;
+	struct tomoyo_number_union minor;
+};
+
+/*
  * tomoyo_path2_acl is a structure which is used for holding an
  * entry with two pathnames operation (i.e. link(), rename() and pivot_root()).
  * It has following fields.
@@ -333,53 +506,61 @@ struct tomoyo_path2_acl {
 };
 
 /*
- * tomoyo_io_buffer is a structure which is used for reading and modifying
- * configuration via /sys/kernel/security/tomoyo/ interface.
- * It has many fields. ->read_var1 , ->read_var2 , ->write_var1 are used as
- * cursors.
+ * tomoyo_mount_acl is a structure which is used for holding an
+ * entry for mount operation.
+ * It has following fields.
  *
- * Since the content of /sys/kernel/security/tomoyo/domain_policy is a list of
- * "struct tomoyo_domain_info" entries and each "struct tomoyo_domain_info"
- * entry has a list of "struct tomoyo_acl_info", we need two cursors when
- * reading (one is for traversing tomoyo_domain_list and the other is for
- * traversing "struct tomoyo_acl_info"->acl_info_list ).
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "dev_name" is the device name.
+ *  (3) "dir_name" is the mount point.
+ *  (4) "fs_type" is the filesystem type.
+ *  (5) "flags" is the mount flags.
  *
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * "select ", TOMOYO seeks the cursor ->read_var1 and ->write_var1 to the
- * domain with the domainname specified by the rest of that line (NULL is set
- * if seek failed).
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * "delete ", TOMOYO deletes an entry or a domain specified by the rest of that
- * line (->write_var1 is set to NULL if a domain was deleted).
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * neither "select " nor "delete ", an entry or a domain specified by that line
- * is appended.
+ * Directive held by this structure is "allow_mount".
+ */
+struct tomoyo_mount_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_MOUNT_ACL */
+	struct tomoyo_name_union dev_name;
+	struct tomoyo_name_union dir_name;
+	struct tomoyo_name_union fs_type;
+	struct tomoyo_number_union flags;
+};
+
+#define TOMOYO_MAX_IO_READ_QUEUE 32
+
+/*
+ * Structure for reading/writing policy via /sys/kernel/security/tomoyo
+ * interfaces.
  */
 struct tomoyo_io_buffer {
-	int (*read) (struct tomoyo_io_buffer *);
+	void (*read) (struct tomoyo_io_buffer *);
 	int (*write) (struct tomoyo_io_buffer *);
+	int (*poll) (struct file *file, poll_table *wait);
 	/* Exclusive lock for this structure.   */
 	struct mutex io_sem;
 	/* Index returned by tomoyo_read_lock(). */
 	int reader_idx;
-	/* The position currently reading from. */
-	struct list_head *read_var1;
-	/* Extra variables for reading.         */
-	struct list_head *read_var2;
+	char __user *read_user_buf;
+	int read_user_buf_avail;
+	struct {
+		struct list_head *domain;
+		struct list_head *group;
+		struct list_head *acl;
+		int avail;
+		int step;
+		int query_index;
+		u16 index;
+		u8 bit;
+		u8 w_pos;
+		bool eof;
+		bool print_this_domain_only;
+		bool print_execute_only;
+		const char *w[TOMOYO_MAX_IO_READ_QUEUE];
+	} r;
 	/* The position currently writing to.   */
 	struct tomoyo_domain_info *write_var1;
-	/* The step for reading.                */
-	int read_step;
 	/* Buffer for reading.                  */
 	char *read_buf;
-	/* EOF flag for reading.                */
-	bool read_eof;
-	/* Read domain ACL of specified PID?    */
-	bool read_single_domain;
-	/* Extra variable for reading.          */
-	u8 read_bit;
-	/* Bytes available for reading.         */
-	int read_avail;
 	/* Size of read buffer.                 */
 	int readbuf_size;
 	/* Buffer for writing.                  */
@@ -388,215 +569,203 @@ struct tomoyo_io_buffer {
 	int write_avail;
 	/* Size of write buffer.                */
 	int writebuf_size;
+	/* Type of this interface.              */
+	u8 type;
 };
 
 /*
- * tomoyo_globally_readable_file_entry is a structure which is used for holding
+ * tomoyo_readable_file is a structure which is used for holding
  * "allow_read" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_globally_readable_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "filename" is a pathname which is allowed to open(O_RDONLY).
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_globally_readable_file_entry {
-	struct list_head list;
+struct tomoyo_readable_file {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *filename;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_pattern_entry is a structure which is used for holding
- * "tomoyo_pattern_list" entries.
+ * tomoyo_no_pattern is a structure which is used for holding
+ * "file_pattern" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_pattern_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "pattern" is a pathname pattern which is used for converting pathnames
  *      to pathname patterns during learning mode.
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_pattern_entry {
-	struct list_head list;
+struct tomoyo_no_pattern {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *pattern;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_no_rewrite_entry is a structure which is used for holding
+ * tomoyo_no_rewrite is a structure which is used for holding
  * "deny_rewrite" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_no_rewrite_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "pattern" is a pathname which is by default not permitted to modify
  *      already existing content.
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_no_rewrite_entry {
-	struct list_head list;
+struct tomoyo_no_rewrite {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *pattern;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_domain_initializer_entry is a structure which is used for holding
- * "initialize_domain" and "no_initialize_domain" entries.
+ * tomoyo_transition_control is a structure which is used for holding
+ * "initialize_domain"/"no_initialize_domain"/"keep_domain"/"no_keep_domain"
+ * entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_domain_initializer_list .
- *  (2) "domainname" which is "a domainname" or "the last component of a
- *      domainname". This field is NULL if "from" clause is not specified.
- *  (3) "program" which is a program's pathname.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
- *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
- *      otherwise.
- *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "type" is type of this entry.
+ *  (3) "is_last_name" is a bool which is true if "domainname" is "the last
  *      component of a domainname", false otherwise.
- */
-struct tomoyo_domain_initializer_entry {
-	struct list_head list;
-	const struct tomoyo_path_info *domainname;    /* This may be NULL */
-	const struct tomoyo_path_info *program;
-	bool is_deleted;
-	bool is_not;       /* True if this entry is "no_initialize_domain".  */
-	/* True if the domainname is tomoyo_get_last_name(). */
-	bool is_last_name;
-};
-
-/*
- * tomoyo_domain_keeper_entry is a structure which is used for holding
- * "keep_domain" and "no_keep_domain" entries.
- * It has following fields.
- *
- *  (1) "list" which is linked to tomoyo_domain_keeper_list .
- *  (2) "domainname" which is "a domainname" or "the last component of a
+ *  (4) "domainname" which is "a domainname" or "the last component of a
  *      domainname".
- *  (3) "program" which is a program's pathname.
- *      This field is NULL if "from" clause is not specified.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
- *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
- *      otherwise.
- *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
- *      component of a domainname", false otherwise.
+ *  (5) "program" which is a program's pathname.
  */
-struct tomoyo_domain_keeper_entry {
-	struct list_head list;
-	const struct tomoyo_path_info *domainname;
-	const struct tomoyo_path_info *program;       /* This may be NULL */
-	bool is_deleted;
-	bool is_not;       /* True if this entry is "no_keep_domain".        */
+struct tomoyo_transition_control {
+	struct tomoyo_acl_head head;
+	u8 type; /* One of values in "enum tomoyo_transition_type".  */
 	/* True if the domainname is tomoyo_get_last_name(). */
 	bool is_last_name;
+	const struct tomoyo_path_info *domainname; /* Maybe NULL */
+	const struct tomoyo_path_info *program;    /* Maybe NULL */
 };
 
 /*
- * tomoyo_alias_entry is a structure which is used for holding "alias" entries.
+ * tomoyo_aggregator is a structure which is used for holding
+ * "aggregator" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_alias_list .
- *  (2) "original_name" which is a dereferenced pathname.
- *  (3) "aliased_name" which is a symlink's pathname.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "original_name" which is originally requested name.
+ *  (3) "aggregated_name" which is name to rewrite.
  */
-struct tomoyo_alias_entry {
-	struct list_head list;
+struct tomoyo_aggregator {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *original_name;
-	const struct tomoyo_path_info *aliased_name;
-	bool is_deleted;
+	const struct tomoyo_path_info *aggregated_name;
 };
 
 /*
- * tomoyo_policy_manager_entry is a structure which is used for holding list of
+ * tomoyo_manager is a structure which is used for holding list of
  * domainnames or programs which are permitted to modify configuration via
  * /sys/kernel/security/tomoyo/ interface.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_policy_manager_list .
- *  (2) "manager" is a domainname or a program's pathname.
- *  (3) "is_domain" is a bool which is true if "manager" is a domainname, false
- *      otherwise.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "is_domain" is a bool which is true if "manager" is a domainname, false
  *      otherwise.
+ *  (3) "manager" is a domainname or a program's pathname.
  */
-struct tomoyo_policy_manager_entry {
-	struct list_head list;
+struct tomoyo_manager {
+	struct tomoyo_acl_head head;
+	bool is_domain;  /* True if manager is a domainname. */
 	/* A path to program or a domainname. */
 	const struct tomoyo_path_info *manager;
-	bool is_domain;  /* True if manager is a domainname. */
-	bool is_deleted; /* True if this entry is deleted. */
+};
+
+struct tomoyo_preference {
+	unsigned int learning_max_entry;
+	bool enforcing_verbose;
+	bool learning_verbose;
+	bool permissive_verbose;
+};
+
+struct tomoyo_profile {
+	const struct tomoyo_path_info *comment;
+	struct tomoyo_preference *learning;
+	struct tomoyo_preference *permissive;
+	struct tomoyo_preference *enforcing;
+	struct tomoyo_preference preference;
+	u8 default_config;
+	u8 config[TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX];
 };
 
 /********** Function prototypes. **********/
 
-/* Check whether the given name matches the given name_union. */
-bool tomoyo_compare_name_union(const struct tomoyo_path_info *name,
-			       const struct tomoyo_name_union *ptr);
+extern asmlinkage long sys_getpid(void);
+extern asmlinkage long sys_getppid(void);
+
+/* Check whether the given string starts with the given keyword. */
+bool tomoyo_str_starts(char **src, const char *find);
+/* Get tomoyo_realpath() of current process. */
+const char *tomoyo_get_exe(void);
+/* Format string. */
+void tomoyo_normalize_line(unsigned char *buffer);
+/* Print warning or error message on console. */
+void tomoyo_warn_log(struct tomoyo_request_info *r, const char *fmt, ...)
+     __attribute__ ((format(printf, 2, 3)));
+/* Check all profiles currently assigned to domains are defined. */
+void tomoyo_check_profile(void);
+/* Open operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_open_control(const u8 type, struct file *file);
+/* Close /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_close_control(struct file *file);
+/* Poll operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_poll_control(struct file *file, poll_table *wait);
+/* Read operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_read_control(struct file *file, char __user *buffer,
+			const int buffer_len);
+/* Write operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_write_control(struct file *file, const char __user *buffer,
+			 const int buffer_len);
 /* Check whether the domain has too many ACL entries to hold. */
-bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain);
-/* Transactional sprintf() for policy dump. */
-bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
+bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r);
+/* Print out of memory warning message. */
+void tomoyo_warn_oom(const char *function);
+/* Check whether the given name matches the given name_union. */
+const struct tomoyo_path_info *
+tomoyo_compare_name_union(const struct tomoyo_path_info *name,
+			  const struct tomoyo_name_union *ptr);
+/* Check whether the given number matches the given number_union. */
+bool tomoyo_compare_number_union(const unsigned long value,
+				 const struct tomoyo_number_union *ptr);
+int tomoyo_get_mode(const u8 profile, const u8 index);
+void tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
 	__attribute__ ((format(printf, 2, 3)));
 /* Check whether the domainname is correct. */
-bool tomoyo_is_correct_domain(const unsigned char *domainname);
+bool tomoyo_correct_domain(const unsigned char *domainname);
 /* Check whether the token is correct. */
-bool tomoyo_is_correct_path(const char *filename, const s8 start_type,
-			    const s8 pattern_type, const s8 end_type);
+bool tomoyo_correct_path(const char *filename);
+bool tomoyo_correct_word(const char *string);
 /* Check whether the token can be a domainname. */
-bool tomoyo_is_domain_def(const unsigned char *buffer);
+bool tomoyo_domain_def(const unsigned char *buffer);
 bool tomoyo_parse_name_union(const char *filename,
 			     struct tomoyo_name_union *ptr);
 /* Check whether the given filename matches the given path_group. */
-bool tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
-			       const struct tomoyo_path_group *group,
-			       const bool may_use_pattern);
+const struct tomoyo_path_info *
+tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
+			  const struct tomoyo_group *group);
+/* Check whether the given value matches the given number_group. */
+bool tomoyo_number_matches_group(const unsigned long min,
+				 const unsigned long max,
+				 const struct tomoyo_group *group);
 /* Check whether the given filename matches the given pattern. */
 bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
 				 const struct tomoyo_path_info *pattern);
-/* Read "alias" entry in exception policy. */
-bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head);
-/*
- * Read "initialize_domain" and "no_initialize_domain" entry
- * in exception policy.
- */
-bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head);
-/* Read "keep_domain" and "no_keep_domain" entry in exception policy. */
-bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head);
-/* Read "file_pattern" entry in exception policy. */
-bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head);
-/* Read "path_group" entry in exception policy. */
-bool tomoyo_read_path_group_policy(struct tomoyo_io_buffer *head);
-/* Read "allow_read" entry in exception policy. */
-bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head);
-/* Read "deny_rewrite" entry in exception policy. */
-bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head);
+
+bool tomoyo_parse_number_union(char *data, struct tomoyo_number_union *num);
 /* Tokenize a line. */
 bool tomoyo_tokenize(char *buffer, char *w[], size_t size);
 /* Write domain policy violation warning message to console? */
 bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain);
-/* Convert double path operation to operation name. */
-const char *tomoyo_path22keyword(const u8 operation);
-/* Get the last component of the given domainname. */
-const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain);
-/* Get warning message. */
-const char *tomoyo_get_msg(const bool is_enforce);
-/* Convert single path operation to operation name. */
-const char *tomoyo_path2keyword(const u8 operation);
-/* Create "alias" entry in exception policy. */
-int tomoyo_write_alias_policy(char *data, const bool is_delete);
-/*
- * Create "initialize_domain" and "no_initialize_domain" entry
- * in exception policy.
- */
-int tomoyo_write_domain_initializer_policy(char *data, const bool is_not,
-					   const bool is_delete);
-/* Create "keep_domain" and "no_keep_domain" entry in exception policy. */
-int tomoyo_write_domain_keeper_policy(char *data, const bool is_not,
-				      const bool is_delete);
+/* Fill "struct tomoyo_request_info". */
+int tomoyo_init_request_info(struct tomoyo_request_info *r,
+			     struct tomoyo_domain_info *domain,
+			     const u8 index);
+/* Check permission for mount operation. */
+int tomoyo_mount_permission(char *dev_name, struct path *path, char *type,
+			    unsigned long flags, void *data_page);
+/* Create "aggregator" entry in exception policy. */
+int tomoyo_write_aggregator(char *data, const bool is_delete);
+int tomoyo_write_transition_control(char *data, const bool is_delete,
+				    const u8 type);
 /*
  * Create "allow_read/write", "allow_execute", "allow_read", "allow_write",
  * "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir",
@@ -604,25 +773,31 @@ int tomoyo_write_domain_keeper_policy(char *data, const bool is_not,
  * "allow_truncate", "allow_symlink", "allow_rewrite", "allow_rename" and
  * "allow_link" entry in domain policy.
  */
-int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain,
-			     const bool is_delete);
+int tomoyo_write_file(char *data, struct tomoyo_domain_info *domain,
+		      const bool is_delete);
 /* Create "allow_read" entry in exception policy. */
-int tomoyo_write_globally_readable_policy(char *data, const bool is_delete);
+int tomoyo_write_globally_readable(char *data, const bool is_delete);
+/* Create "allow_mount" entry in domain policy. */
+int tomoyo_write_mount(char *data, struct tomoyo_domain_info *domain,
+		       const bool is_delete);
 /* Create "deny_rewrite" entry in exception policy. */
-int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete);
+int tomoyo_write_no_rewrite(char *data, const bool is_delete);
 /* Create "file_pattern" entry in exception policy. */
-int tomoyo_write_pattern_policy(char *data, const bool is_delete);
-/* Create "path_group" entry in exception policy. */
-int tomoyo_write_path_group_policy(char *data, const bool is_delete);
+int tomoyo_write_pattern(char *data, const bool is_delete);
+/* Create "path_group"/"number_group" entry in exception policy. */
+int tomoyo_write_group(char *data, const bool is_delete, const u8 type);
+int tomoyo_supervisor(struct tomoyo_request_info *r, const char *fmt, ...)
+     __attribute__ ((format(printf, 2, 3)));
 /* Find a domain by the given name. */
 struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname);
 /* Find or create a domain by the given name. */
-struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
-							    domainname,
-							    const u8 profile);
-
-/* Allocate memory for "struct tomoyo_path_group". */
-struct tomoyo_path_group *tomoyo_get_path_group(const char *group_name);
+struct tomoyo_domain_info *tomoyo_assign_domain(const char *domainname,
+						const u8 profile);
+struct tomoyo_profile *tomoyo_profile(const u8 profile);
+/*
+ * Allocate memory for "struct tomoyo_path_group"/"struct tomoyo_number_group".
+ */
+struct tomoyo_group *tomoyo_get_group(const char *group_name, const u8 type);
 
 /* Check mode for specified functionality. */
 unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain,
@@ -632,25 +807,23 @@ void tomoyo_fill_path_info(struct tomoyo_path_info *ptr);
 /* Run policy loader when /sbin/init starts. */
 void tomoyo_load_policy(const char *filename);
 
-/* Convert binary string to ascii string. */
-int tomoyo_encode(char *buffer, int buflen, const char *str);
+void tomoyo_put_number_union(struct tomoyo_number_union *ptr);
 
-/* Returns realpath(3) of the given pathname but ignores chroot'ed root. */
-int tomoyo_realpath_from_path2(struct path *path, char *newname,
-			       int newname_len);
+/* Convert binary string to ascii string. */
+char *tomoyo_encode(const char *str);
 
 /*
- * Returns realpath(3) of the given pathname but ignores chroot'ed root.
- * These functions use kzalloc(), so the caller must call kfree()
- * if these functions didn't return NULL.
+ * Returns realpath(3) of the given pathname except that
+ * ignores chroot'ed root and does not follow the final symlink.
  */
-char *tomoyo_realpath(const char *pathname);
+char *tomoyo_realpath_nofollow(const char *pathname);
 /*
- * Same with tomoyo_realpath() except that it doesn't follow the final symlink.
+ * Returns realpath(3) of the given pathname except that
+ * ignores chroot'ed root and the pathname is already solved.
  */
-char *tomoyo_realpath_nofollow(const char *pathname);
-/* Same with tomoyo_realpath() except that the pathname is already solved. */
 char *tomoyo_realpath_from_path(struct path *path);
+/* Get patterned pathname. */
+const char *tomoyo_pattern(const struct tomoyo_path_info *filename);
 
 /* Check memory quota. */
 bool tomoyo_memory_ok(void *ptr);
@@ -663,23 +836,29 @@ void *tomoyo_commit_ok(void *data, const unsigned int size);
 const struct tomoyo_path_info *tomoyo_get_name(const char *name);
 
 /* Check for memory usage. */
-int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head);
+void tomoyo_read_memory_counter(struct tomoyo_io_buffer *head);
 
 /* Set memory quota. */
 int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head);
 
-/* Initialize realpath related code. */
-void __init tomoyo_realpath_init(void);
-int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
+/* Initialize mm related code. */
+void __init tomoyo_mm_init(void);
+int tomoyo_path_permission(struct tomoyo_request_info *r, u8 operation,
 			   const struct tomoyo_path_info *filename);
 int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 				 struct path *path, const int flag);
+int tomoyo_path_number_perm(const u8 operation, struct path *path,
+			    unsigned long number);
+int tomoyo_mkdev_perm(const u8 operation, struct path *path,
+		      const unsigned int mode, unsigned int dev);
 int tomoyo_path_perm(const u8 operation, struct path *path);
 int tomoyo_path2_perm(const u8 operation, struct path *path1,
 		      struct path *path2);
-int tomoyo_check_rewrite_permission(struct file *filp);
 int tomoyo_find_next_domain(struct linux_binprm *bprm);
 
+void tomoyo_print_ulong(char *buffer, const int buffer_len,
+			const unsigned long value, const u8 type);
+
 /* Drop refcount on tomoyo_name_union. */
 void tomoyo_put_name_union(struct tomoyo_name_union *ptr);
 
@@ -688,6 +867,25 @@ void tomoyo_run_gc(void);
 
 void tomoyo_memory_free(void *ptr);
 
+int tomoyo_update_domain(struct tomoyo_acl_info *new_entry, const int size,
+			 bool is_delete, struct tomoyo_domain_info *domain,
+			 bool (*check_duplicate) (const struct tomoyo_acl_info
+						  *,
+						  const struct tomoyo_acl_info
+						  *),
+			 bool (*merge_duplicate) (struct tomoyo_acl_info *,
+						  struct tomoyo_acl_info *,
+						  const bool));
+int tomoyo_update_policy(struct tomoyo_acl_head *new_entry, const int size,
+			 bool is_delete, struct list_head *list,
+			 bool (*check_duplicate) (const struct tomoyo_acl_head
+						  *,
+						  const struct tomoyo_acl_head
+						  *));
+void tomoyo_check_acl(struct tomoyo_request_info *r,
+		      bool (*check_entry) (struct tomoyo_request_info *,
+					   const struct tomoyo_acl_info *));
+
 /********** External variable definitions. **********/
 
 /* Lock for GC. */
@@ -696,14 +894,8 @@ extern struct srcu_struct tomoyo_ss;
 /* The list for "struct tomoyo_domain_info". */
 extern struct list_head tomoyo_domain_list;
 
-extern struct list_head tomoyo_path_group_list;
-extern struct list_head tomoyo_domain_initializer_list;
-extern struct list_head tomoyo_domain_keeper_list;
-extern struct list_head tomoyo_alias_list;
-extern struct list_head tomoyo_globally_readable_list;
-extern struct list_head tomoyo_pattern_list;
-extern struct list_head tomoyo_no_rewrite_list;
-extern struct list_head tomoyo_policy_manager_list;
+extern struct list_head tomoyo_policy_list[TOMOYO_MAX_POLICY];
+extern struct list_head tomoyo_group_list[TOMOYO_MAX_GROUP];
 extern struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
 
 /* Lock for protecting policy. */
@@ -715,6 +907,14 @@ extern bool tomoyo_policy_loaded;
 /* The kernel's domain. */
 extern struct tomoyo_domain_info tomoyo_kernel_domain;
 
+extern const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION];
+extern const char *tomoyo_mkdev_keyword[TOMOYO_MAX_MKDEV_OPERATION];
+extern const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION];
+extern const char *tomoyo_path_number_keyword[TOMOYO_MAX_PATH_NUMBER_OPERATION];
+
+extern unsigned int tomoyo_quota_for_query;
+extern unsigned int tomoyo_query_memory_size;
+
 /********** Inlined functions. **********/
 
 static inline int tomoyo_read_lock(void)
@@ -735,25 +935,25 @@ static inline bool tomoyo_pathcmp(const struct tomoyo_path_info *a,
 }
 
 /**
- * tomoyo_is_valid - Check whether the character is a valid char.
+ * tomoyo_valid - Check whether the character is a valid char.
  *
  * @c: The character to check.
  *
  * Returns true if @c is a valid character, false otherwise.
  */
-static inline bool tomoyo_is_valid(const unsigned char c)
+static inline bool tomoyo_valid(const unsigned char c)
 {
 	return c > ' ' && c < 127;
 }
 
 /**
- * tomoyo_is_invalid - Check whether the character is an invalid char.
+ * tomoyo_invalid - Check whether the character is an invalid char.
  *
  * @c: The character to check.
  *
  * Returns true if @c is an invalid character, false otherwise.
  */
-static inline bool tomoyo_is_invalid(const unsigned char c)
+static inline bool tomoyo_invalid(const unsigned char c)
 {
 	return c && (c <= ' ' || c >= 127);
 }
@@ -761,13 +961,13 @@ static inline bool tomoyo_is_invalid(const unsigned char c)
 static inline void tomoyo_put_name(const struct tomoyo_path_info *name)
 {
 	if (name) {
-		struct tomoyo_name_entry *ptr =
-			container_of(name, struct tomoyo_name_entry, entry);
+		struct tomoyo_name *ptr =
+			container_of(name, typeof(*ptr), entry);
 		atomic_dec(&ptr->users);
 	}
 }
 
-static inline void tomoyo_put_path_group(struct tomoyo_path_group *group)
+static inline void tomoyo_put_group(struct tomoyo_group *group)
 {
 	if (group)
 		atomic_dec(&group->users);
@@ -784,75 +984,35 @@ static inline struct tomoyo_domain_info *tomoyo_real_domain(struct task_struct
 	return task_cred_xxx(task, security);
 }
 
-static inline bool tomoyo_is_same_acl_head(const struct tomoyo_acl_info *p1,
+static inline bool tomoyo_same_acl_head(const struct tomoyo_acl_info *p1,
 					   const struct tomoyo_acl_info *p2)
 {
 	return p1->type == p2->type;
 }
 
-static inline bool tomoyo_is_same_name_union
+static inline bool tomoyo_same_name_union
 (const struct tomoyo_name_union *p1, const struct tomoyo_name_union *p2)
 {
 	return p1->filename == p2->filename && p1->group == p2->group &&
 		p1->is_group == p2->is_group;
 }
 
-static inline bool tomoyo_is_same_path_acl(const struct tomoyo_path_acl *p1,
-					   const struct tomoyo_path_acl *p2)
-{
-	return tomoyo_is_same_acl_head(&p1->head, &p2->head) &&
-		tomoyo_is_same_name_union(&p1->name, &p2->name);
-}
-
-static inline bool tomoyo_is_same_path2_acl(const struct tomoyo_path2_acl *p1,
-					    const struct tomoyo_path2_acl *p2)
+static inline bool tomoyo_same_number_union
+(const struct tomoyo_number_union *p1, const struct tomoyo_number_union *p2)
 {
-	return tomoyo_is_same_acl_head(&p1->head, &p2->head) &&
-		tomoyo_is_same_name_union(&p1->name1, &p2->name1) &&
-		tomoyo_is_same_name_union(&p1->name2, &p2->name2);
-}
-
-static inline bool tomoyo_is_same_domain_initializer_entry
-(const struct tomoyo_domain_initializer_entry *p1,
- const struct tomoyo_domain_initializer_entry *p2)
-{
-	return p1->is_not == p2->is_not && p1->is_last_name == p2->is_last_name
-		&& p1->domainname == p2->domainname
-		&& p1->program == p2->program;
-}
-
-static inline bool tomoyo_is_same_domain_keeper_entry
-(const struct tomoyo_domain_keeper_entry *p1,
- const struct tomoyo_domain_keeper_entry *p2)
-{
-	return p1->is_not == p2->is_not && p1->is_last_name == p2->is_last_name
-		&& p1->domainname == p2->domainname
-		&& p1->program == p2->program;
-}
-
-static inline bool tomoyo_is_same_alias_entry
-(const struct tomoyo_alias_entry *p1, const struct tomoyo_alias_entry *p2)
-{
-	return p1->original_name == p2->original_name &&
-		p1->aliased_name == p2->aliased_name;
+	return p1->values[0] == p2->values[0] && p1->values[1] == p2->values[1]
+		&& p1->group == p2->group && p1->min_type == p2->min_type &&
+		p1->max_type == p2->max_type && p1->is_group == p2->is_group;
 }
 
 /**
  * list_for_each_cookie - iterate over a list with cookie.
  * @pos:        the &struct list_head to use as a loop cursor.
- * @cookie:     the &struct list_head to use as a cookie.
  * @head:       the head for your list.
- *
- * Same with list_for_each_rcu() except that this primitive uses @cookie
- * so that we can continue iteration.
- * @cookie must be NULL when iteration starts, and @cookie will become
- * NULL when iteration finishes.
  */
-#define list_for_each_cookie(pos, cookie, head)				\
-	for (({ if (!cookie)						\
-				     cookie = head; }),			\
-		     pos = rcu_dereference((cookie)->next);		\
-	     prefetch(pos->next), pos != (head) || ((cookie) = NULL);	\
-	     (cookie) = pos, pos = rcu_dereference(pos->next))
+#define list_for_each_cookie(pos, head)					\
+	if (!pos)							\
+		pos =  srcu_dereference((head)->next, &tomoyo_ss);	\
+	for ( ; pos != (head); pos = srcu_dereference(pos->next, &tomoyo_ss))
 
 #endif /* !defined(_SECURITY_TOMOYO_COMMON_H) */
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index cd8ba444676..35388408e47 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -1,12 +1,9 @@
 /*
  * security/tomoyo/domain.c
  *
- * Implementation of the Domain-Based Mandatory Access Control.
- *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
+ * Domain transition functions for TOMOYO.
  *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include "common.h"
@@ -18,366 +15,191 @@
 /* The initial domain. */
 struct tomoyo_domain_info tomoyo_kernel_domain;
 
-/*
- * tomoyo_domain_list is used for holding list of domains.
- * The ->acl_info_list of "struct tomoyo_domain_info" is used for holding
- * permissions (e.g. "allow_read /lib/libc-2.5.so") given to each domain.
- *
- * An entry is added by
- *
- * # ( echo "<kernel>"; echo "allow_execute /sbin/init" ) > \
- *                                  /sys/kernel/security/tomoyo/domain_policy
- *
- * and is deleted by
- *
- * # ( echo "<kernel>"; echo "delete allow_execute /sbin/init" ) > \
- *                                  /sys/kernel/security/tomoyo/domain_policy
- *
- * and all entries are retrieved by
- *
- * # cat /sys/kernel/security/tomoyo/domain_policy
- *
- * A domain is added by
- *
- * # echo "<kernel>" > /sys/kernel/security/tomoyo/domain_policy
- *
- * and is deleted by
- *
- * # echo "delete <kernel>" > /sys/kernel/security/tomoyo/domain_policy
- *
- * and all domains are retrieved by
- *
- * # grep '^<kernel>' /sys/kernel/security/tomoyo/domain_policy
- *
- * Normally, a domainname is monotonically getting longer because a domainname
- * which the process will belong to if an execve() operation succeeds is
- * defined as a concatenation of "current domainname" + "pathname passed to
- * execve()".
- * See tomoyo_domain_initializer_list and tomoyo_domain_keeper_list for
- * exceptions.
- */
-LIST_HEAD(tomoyo_domain_list);
-
 /**
- * tomoyo_get_last_name - Get last component of a domainname.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns the last component of the domainname.
- */
-const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain)
-{
-	const char *cp0 = domain->domainname->name;
-	const char *cp1 = strrchr(cp0, ' ');
-
-	if (cp1)
-		return cp1 + 1;
-	return cp0;
-}
-
-/*
- * tomoyo_domain_initializer_list is used for holding list of programs which
- * triggers reinitialization of domainname. Normally, a domainname is
- * monotonically getting longer. But sometimes, we restart daemon programs.
- * It would be convenient for us that "a daemon started upon system boot" and
- * "the daemon restarted from console" belong to the same domain. Thus, TOMOYO
- * provides a way to shorten domainnames.
+ * tomoyo_update_policy - Update an entry for exception policy.
  *
- * An entry is added by
- *
- * # echo 'initialize_domain /usr/sbin/httpd' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete initialize_domain /usr/sbin/httpd' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^initialize_domain /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, /usr/sbin/httpd will belong to
- * "<kernel> /usr/sbin/httpd" domain.
- *
- * You may specify a domainname using "from" keyword.
- * "initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
- * will cause "/usr/sbin/httpd" executed from "<kernel> /etc/rc.d/init.d/httpd"
- * domain to belong to "<kernel> /usr/sbin/httpd" domain.
- *
- * You may add "no_" prefix to "initialize_domain".
- * "initialize_domain /usr/sbin/httpd" and
- * "no_initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
- * will cause "/usr/sbin/httpd" to belong to "<kernel> /usr/sbin/httpd" domain
- * unless executed from "<kernel> /etc/rc.d/init.d/httpd" domain.
- */
-LIST_HEAD(tomoyo_domain_initializer_list);
-
-/**
- * tomoyo_update_domain_initializer_entry - Update "struct tomoyo_domain_initializer_entry" list.
- *
- * @domainname: The name of domain. May be NULL.
- * @program:    The name of program.
- * @is_not:     True if it is "no_initialize_domain" entry.
- * @is_delete:  True if it is a delete request.
+ * @new_entry:       Pointer to "struct tomoyo_acl_info".
+ * @size:            Size of @new_entry in bytes.
+ * @is_delete:       True if it is a delete request.
+ * @list:            Pointer to "struct list_head".
+ * @check_duplicate: Callback function to find duplicated entry.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_domain_initializer_entry(const char *domainname,
-						  const char *program,
-						  const bool is_not,
-						  const bool is_delete)
+int tomoyo_update_policy(struct tomoyo_acl_head *new_entry, const int size,
+			 bool is_delete, struct list_head *list,
+			 bool (*check_duplicate) (const struct tomoyo_acl_head
+						  *,
+						  const struct tomoyo_acl_head
+						  *))
 {
-	struct tomoyo_domain_initializer_entry *ptr;
-	struct tomoyo_domain_initializer_entry e = { .is_not = is_not };
 	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_acl_head *entry;
 
-	if (!tomoyo_is_correct_path(program, 1, -1, -1))
-		return -EINVAL; /* No patterns allowed. */
-	if (domainname) {
-		if (!tomoyo_is_domain_def(domainname) &&
-		    tomoyo_is_correct_path(domainname, 1, -1, -1))
-			e.is_last_name = true;
-		else if (!tomoyo_is_correct_domain(domainname))
-			return -EINVAL;
-		e.domainname = tomoyo_get_name(domainname);
-		if (!e.domainname)
-			goto out;
-	}
-	e.program = tomoyo_get_name(program);
-	if (!e.program)
-		goto out;
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list, list) {
-		if (!tomoyo_is_same_domain_initializer_entry(ptr, &e))
+		return -ENOMEM;
+	list_for_each_entry_rcu(entry, list, list) {
+		if (!check_duplicate(entry, new_entry))
 			continue;
-		ptr->is_deleted = is_delete;
+		entry->is_deleted = is_delete;
 		error = 0;
 		break;
 	}
-	if (!is_delete && error) {
-		struct tomoyo_domain_initializer_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
+	if (error && !is_delete) {
+		entry = tomoyo_commit_ok(new_entry, size);
 		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_domain_initializer_list);
+			list_add_tail_rcu(&entry->list, list);
 			error = 0;
 		}
 	}
 	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(e.domainname);
-	tomoyo_put_name(e.program);
 	return error;
 }
 
 /**
- * tomoyo_read_domain_initializer_policy - Read "struct tomoyo_domain_initializer_entry" list.
+ * tomoyo_update_domain - Update an entry for domain policy.
  *
- * @head: Pointer to "struct tomoyo_io_buffer".
+ * @new_entry:       Pointer to "struct tomoyo_acl_info".
+ * @size:            Size of @new_entry in bytes.
+ * @is_delete:       True if it is a delete request.
+ * @domain:          Pointer to "struct tomoyo_domain_info".
+ * @check_duplicate: Callback function to find duplicated entry.
+ * @merge_duplicate: Callback function to merge duplicated entry.
  *
- * Returns true on success, false otherwise.
+ * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head)
+int tomoyo_update_domain(struct tomoyo_acl_info *new_entry, const int size,
+			 bool is_delete, struct tomoyo_domain_info *domain,
+			 bool (*check_duplicate) (const struct tomoyo_acl_info
+						  *,
+						  const struct tomoyo_acl_info
+						  *),
+			 bool (*merge_duplicate) (struct tomoyo_acl_info *,
+						  struct tomoyo_acl_info *,
+						  const bool))
 {
-	struct list_head *pos;
-	bool done = true;
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_acl_info *entry;
 
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_domain_initializer_list) {
-		const char *no;
-		const char *from = "";
-		const char *domain = "";
-		struct tomoyo_domain_initializer_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_domain_initializer_entry,
-				  list);
-		if (ptr->is_deleted)
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		return error;
+	list_for_each_entry_rcu(entry, &domain->acl_info_list, list) {
+		if (!check_duplicate(entry, new_entry))
 			continue;
-		no = ptr->is_not ? "no_" : "";
-		if (ptr->domainname) {
-			from = " from ";
-			domain = ptr->domainname->name;
+		if (merge_duplicate)
+			entry->is_deleted = merge_duplicate(entry, new_entry,
+							    is_delete);
+		else
+			entry->is_deleted = is_delete;
+		error = 0;
+		break;
+	}
+	if (error && !is_delete) {
+		entry = tomoyo_commit_ok(new_entry, size);
+		if (entry) {
+			list_add_tail_rcu(&entry->list, &domain->acl_info_list);
+			error = 0;
 		}
-		done = tomoyo_io_printf(head,
-					"%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN
-					"%s%s%s\n", no, ptr->program->name,
-					from, domain);
-		if (!done)
-			break;
 	}
-	return done;
+	mutex_unlock(&tomoyo_policy_lock);
+	return error;
 }
 
-/**
- * tomoyo_write_domain_initializer_policy - Write "struct tomoyo_domain_initializer_entry" list.
- *
- * @data:      String to parse.
- * @is_not:    True if it is "no_initialize_domain" entry.
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-int tomoyo_write_domain_initializer_policy(char *data, const bool is_not,
-					   const bool is_delete)
+void tomoyo_check_acl(struct tomoyo_request_info *r,
+		      bool (*check_entry) (struct tomoyo_request_info *,
+					   const struct tomoyo_acl_info *))
 {
-	char *cp = strstr(data, " from ");
+	const struct tomoyo_domain_info *domain = r->domain;
+	struct tomoyo_acl_info *ptr;
 
-	if (cp) {
-		*cp = '\0';
-		return tomoyo_update_domain_initializer_entry(cp + 6, data,
-							      is_not,
-							      is_delete);
+	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
+		if (ptr->is_deleted || ptr->type != r->param_type)
+			continue;
+		if (check_entry(r, ptr)) {
+			r->granted = true;
+			return;
+		}
 	}
-	return tomoyo_update_domain_initializer_entry(NULL, data, is_not,
-						      is_delete);
+	r->granted = false;
 }
 
+/* The list for "struct tomoyo_domain_info". */
+LIST_HEAD(tomoyo_domain_list);
+
+struct list_head tomoyo_policy_list[TOMOYO_MAX_POLICY];
+struct list_head tomoyo_group_list[TOMOYO_MAX_GROUP];
+
 /**
- * tomoyo_is_domain_initializer - Check whether the given program causes domainname reinitialization.
- *
- * @domainname: The name of domain.
- * @program:    The name of program.
- * @last_name:  The last component of @domainname.
+ * tomoyo_last_word - Get last component of a domainname.
  *
- * Returns true if executing @program reinitializes domain transition,
- * false otherwise.
+ * @domainname: Domainname to check.
  *
- * Caller holds tomoyo_read_lock().
+ * Returns the last word of @domainname.
  */
-static bool tomoyo_is_domain_initializer(const struct tomoyo_path_info *
-					 domainname,
-					 const struct tomoyo_path_info *program,
-					 const struct tomoyo_path_info *
-					 last_name)
+static const char *tomoyo_last_word(const char *name)
 {
-	struct tomoyo_domain_initializer_entry *ptr;
-	bool flag = false;
-
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list, list) {
-		if (ptr->is_deleted)
-			continue;
-		if (ptr->domainname) {
-			if (!ptr->is_last_name) {
-				if (ptr->domainname != domainname)
-					continue;
-			} else {
-				if (tomoyo_pathcmp(ptr->domainname, last_name))
-					continue;
-			}
-		}
-		if (tomoyo_pathcmp(ptr->program, program))
-			continue;
-		if (ptr->is_not) {
-			flag = false;
-			break;
-		}
-		flag = true;
-	}
-	return flag;
+        const char *cp = strrchr(name, ' ');
+        if (cp)
+                return cp + 1;
+        return name;
 }
 
-/*
- * tomoyo_domain_keeper_list is used for holding list of domainnames which
- * suppresses domain transition. Normally, a domainname is monotonically
- * getting longer. But sometimes, we want to suppress domain transition.
- * It would be convenient for us that programs executed from a login session
- * belong to the same domain. Thus, TOMOYO provides a way to suppress domain
- * transition.
- *
- * An entry is added by
- *
- * # echo 'keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^keep_domain /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, any process which belongs to
- * "<kernel> /usr/sbin/sshd /bin/bash" domain will remain in that domain,
- * unless explicitly specified by "initialize_domain" or "no_keep_domain".
- *
- * You may specify a program using "from" keyword.
- * "keep_domain /bin/pwd from <kernel> /usr/sbin/sshd /bin/bash"
- * will cause "/bin/pwd" executed from "<kernel> /usr/sbin/sshd /bin/bash"
- * domain to remain in "<kernel> /usr/sbin/sshd /bin/bash" domain.
- *
- * You may add "no_" prefix to "keep_domain".
- * "keep_domain <kernel> /usr/sbin/sshd /bin/bash" and
- * "no_keep_domain /usr/bin/passwd from <kernel> /usr/sbin/sshd /bin/bash" will
- * cause "/usr/bin/passwd" to belong to
- * "<kernel> /usr/sbin/sshd /bin/bash /usr/bin/passwd" domain, unless
- * explicitly specified by "initialize_domain".
- */
-LIST_HEAD(tomoyo_domain_keeper_list);
+static bool tomoyo_same_transition_control(const struct tomoyo_acl_head *a,
+					   const struct tomoyo_acl_head *b)
+{
+	const struct tomoyo_transition_control *p1 = container_of(a,
+								  typeof(*p1),
+								  head);
+	const struct tomoyo_transition_control *p2 = container_of(b,
+								  typeof(*p2),
+								  head);
+	return p1->type == p2->type && p1->is_last_name == p2->is_last_name
+		&& p1->domainname == p2->domainname
+		&& p1->program == p2->program;
+}
 
 /**
- * tomoyo_update_domain_keeper_entry - Update "struct tomoyo_domain_keeper_entry" list.
+ * tomoyo_update_transition_control_entry - Update "struct tomoyo_transition_control" list.
  *
- * @domainname: The name of domain.
- * @program:    The name of program. May be NULL.
- * @is_not:     True if it is "no_keep_domain" entry.
+ * @domainname: The name of domain. Maybe NULL.
+ * @program:    The name of program. Maybe NULL.
+ * @type:       Type of transition.
  * @is_delete:  True if it is a delete request.
  *
  * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_domain_keeper_entry(const char *domainname,
-					     const char *program,
-					     const bool is_not,
-					     const bool is_delete)
+static int tomoyo_update_transition_control_entry(const char *domainname,
+						  const char *program,
+						  const u8 type,
+						  const bool is_delete)
 {
-	struct tomoyo_domain_keeper_entry *ptr;
-	struct tomoyo_domain_keeper_entry e = { .is_not = is_not };
+	struct tomoyo_transition_control e = { .type = type };
 	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (!tomoyo_is_domain_def(domainname) &&
-	    tomoyo_is_correct_path(domainname, 1, -1, -1))
-		e.is_last_name = true;
-	else if (!tomoyo_is_correct_domain(domainname))
-		return -EINVAL;
 	if (program) {
-		if (!tomoyo_is_correct_path(program, 1, -1, -1))
+		if (!tomoyo_correct_path(program))
 			return -EINVAL;
 		e.program = tomoyo_get_name(program);
 		if (!e.program)
 			goto out;
 	}
-	e.domainname = tomoyo_get_name(domainname);
-	if (!e.domainname)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-		if (!tomoyo_is_same_domain_keeper_entry(ptr, &e))
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_domain_keeper_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_domain_keeper_list);
-			error = 0;
+	if (domainname) {
+		if (!tomoyo_correct_domain(domainname)) {
+			if (!tomoyo_correct_path(domainname))
+				goto out;
+			e.is_last_name = true;
 		}
+		e.domainname = tomoyo_get_name(domainname);
+		if (!e.domainname)
+			goto out;
 	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list
+				     [TOMOYO_ID_TRANSITION_CONTROL],
+				     tomoyo_same_transition_control);
  out:
 	tomoyo_put_name(e.domainname);
 	tomoyo_put_name(e.program);
@@ -385,219 +207,133 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname,
 }
 
 /**
- * tomoyo_write_domain_keeper_policy - Write "struct tomoyo_domain_keeper_entry" list.
+ * tomoyo_write_transition_control - Write "struct tomoyo_transition_control" list.
  *
  * @data:      String to parse.
- * @is_not:    True if it is "no_keep_domain" entry.
  * @is_delete: True if it is a delete request.
+ * @type:      Type of this entry.
  *
- * Caller holds tomoyo_read_lock().
- */
-int tomoyo_write_domain_keeper_policy(char *data, const bool is_not,
-				      const bool is_delete)
-{
-	char *cp = strstr(data, " from ");
-
-	if (cp) {
-		*cp = '\0';
-		return tomoyo_update_domain_keeper_entry(cp + 6, data, is_not,
-							 is_delete);
-	}
-	return tomoyo_update_domain_keeper_entry(data, NULL, is_not, is_delete);
-}
-
-/**
- * tomoyo_read_domain_keeper_policy - Read "struct tomoyo_domain_keeper_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
+ * Returns 0 on success, negative value otherwise.
  */
-bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head)
+int tomoyo_write_transition_control(char *data, const bool is_delete,
+				    const u8 type)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_domain_keeper_list) {
-		struct tomoyo_domain_keeper_entry *ptr;
-		const char *no;
-		const char *from = "";
-		const char *program = "";
-
-		ptr = list_entry(pos, struct tomoyo_domain_keeper_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		no = ptr->is_not ? "no_" : "";
-		if (ptr->program) {
-			from = " from ";
-			program = ptr->program->name;
-		}
-		done = tomoyo_io_printf(head,
-					"%s" TOMOYO_KEYWORD_KEEP_DOMAIN
-					"%s%s%s\n", no, program, from,
-					ptr->domainname->name);
-		if (!done)
-			break;
+	char *domainname = strstr(data, " from ");
+	if (domainname) {
+		*domainname = '\0';
+		domainname += 6;
+	} else if (type == TOMOYO_TRANSITION_CONTROL_NO_KEEP ||
+		   type == TOMOYO_TRANSITION_CONTROL_KEEP) {
+		domainname = data;
+		data = NULL;
 	}
-	return done;
+	return tomoyo_update_transition_control_entry(domainname, data, type,
+						      is_delete);
 }
 
 /**
- * tomoyo_is_domain_keeper - Check whether the given program causes domain transition suppression.
+ * tomoyo_transition_type - Get domain transition type.
  *
  * @domainname: The name of domain.
  * @program:    The name of program.
- * @last_name:  The last component of @domainname.
  *
- * Returns true if executing @program supresses domain transition,
- * false otherwise.
+ * Returns TOMOYO_TRANSITION_CONTROL_INITIALIZE if executing @program
+ * reinitializes domain transition, TOMOYO_TRANSITION_CONTROL_KEEP if executing
+ * @program suppresses domain transition, others otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_domain_keeper(const struct tomoyo_path_info *domainname,
-				    const struct tomoyo_path_info *program,
-				    const struct tomoyo_path_info *last_name)
+static u8 tomoyo_transition_type(const struct tomoyo_path_info *domainname,
+				 const struct tomoyo_path_info *program)
 {
-	struct tomoyo_domain_keeper_entry *ptr;
-	bool flag = false;
-
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-		if (ptr->is_deleted)
-			continue;
-		if (!ptr->is_last_name) {
-			if (ptr->domainname != domainname)
+	const struct tomoyo_transition_control *ptr;
+	const char *last_name = tomoyo_last_word(domainname->name);
+	u8 type;
+	for (type = 0; type < TOMOYO_MAX_TRANSITION_TYPE; type++) {
+ next:
+		list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+					[TOMOYO_ID_TRANSITION_CONTROL],
+					head.list) {
+			if (ptr->head.is_deleted || ptr->type != type)
 				continue;
-		} else {
-			if (tomoyo_pathcmp(ptr->domainname, last_name))
+			if (ptr->domainname) {
+				if (!ptr->is_last_name) {
+					if (ptr->domainname != domainname)
+						continue;
+				} else {
+					/*
+					 * Use direct strcmp() since this is
+					 * unlikely used.
+					 */
+					if (strcmp(ptr->domainname->name,
+						   last_name))
+						continue;
+				}
+			}
+			if (ptr->program &&
+			    tomoyo_pathcmp(ptr->program, program))
 				continue;
+			if (type == TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE) {
+				/*
+				 * Do not check for initialize_domain if
+				 * no_initialize_domain matched.
+				 */
+				type = TOMOYO_TRANSITION_CONTROL_NO_KEEP;
+				goto next;
+			}
+			goto done;
 		}
-		if (ptr->program && tomoyo_pathcmp(ptr->program, program))
-			continue;
-		if (ptr->is_not) {
-			flag = false;
-			break;
-		}
-		flag = true;
 	}
-	return flag;
+ done:
+	return type;
 }
 
-/*
- * tomoyo_alias_list is used for holding list of symlink's pathnames which are
- * allowed to be passed to an execve() request. Normally, the domainname which
- * the current process will belong to after execve() succeeds is calculated
- * using dereferenced pathnames. But some programs behave differently depending
- * on the name passed to argv[0]. For busybox, calculating domainname using
- * dereferenced pathnames will cause all programs in the busybox to belong to
- * the same domain. Thus, TOMOYO provides a way to allow use of symlink's
- * pathname for checking execve()'s permission and calculating domainname which
- * the current process will belong to after execve() succeeds.
- *
- * An entry is added by
- *
- * # echo 'alias /bin/busybox /bin/cat' > \
- *                            /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete alias /bin/busybox /bin/cat' > \
- *                            /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^alias /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if /bin/cat is a symlink to /bin/busybox and execution
- * of /bin/cat is requested, permission is checked for /bin/cat rather than
- * /bin/busybox and domainname which the current process will belong to after
- * execve() succeeds is calculated using /bin/cat rather than /bin/busybox .
- */
-LIST_HEAD(tomoyo_alias_list);
+static bool tomoyo_same_aggregator(const struct tomoyo_acl_head *a,
+				   const struct tomoyo_acl_head *b)
+{
+	const struct tomoyo_aggregator *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_aggregator *p2 = container_of(b, typeof(*p2), head);
+	return p1->original_name == p2->original_name &&
+		p1->aggregated_name == p2->aggregated_name;
+}
 
 /**
- * tomoyo_update_alias_entry - Update "struct tomoyo_alias_entry" list.
+ * tomoyo_update_aggregator_entry - Update "struct tomoyo_aggregator" list.
  *
- * @original_name: The original program's real name.
- * @aliased_name:  The symbolic program's symbolic link's name.
- * @is_delete:     True if it is a delete request.
+ * @original_name:   The original program's name.
+ * @aggregated_name: The program name to use.
+ * @is_delete:       True if it is a delete request.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_alias_entry(const char *original_name,
-				     const char *aliased_name,
-				     const bool is_delete)
+static int tomoyo_update_aggregator_entry(const char *original_name,
+					  const char *aggregated_name,
+					  const bool is_delete)
 {
-	struct tomoyo_alias_entry *ptr;
-	struct tomoyo_alias_entry e = { };
+	struct tomoyo_aggregator e = { };
 	int error = is_delete ? -ENOENT : -ENOMEM;
 
-	if (!tomoyo_is_correct_path(original_name, 1, -1, -1) ||
-	    !tomoyo_is_correct_path(aliased_name, 1, -1, -1))
-		return -EINVAL; /* No patterns allowed. */
+	if (!tomoyo_correct_path(original_name) ||
+	    !tomoyo_correct_path(aggregated_name))
+		return -EINVAL;
 	e.original_name = tomoyo_get_name(original_name);
-	e.aliased_name = tomoyo_get_name(aliased_name);
-	if (!e.original_name || !e.aliased_name)
+	e.aggregated_name = tomoyo_get_name(aggregated_name);
+	if (!e.original_name || !e.aggregated_name ||
+	    e.aggregated_name->is_patterned) /* No patterns allowed. */
 		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-		if (!tomoyo_is_same_alias_entry(ptr, &e))
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_alias_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &tomoyo_alias_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_AGGREGATOR],
+				     tomoyo_same_aggregator);
  out:
 	tomoyo_put_name(e.original_name);
-	tomoyo_put_name(e.aliased_name);
+	tomoyo_put_name(e.aggregated_name);
 	return error;
 }
 
 /**
- * tomoyo_read_alias_policy - Read "struct tomoyo_alias_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_alias_list) {
-		struct tomoyo_alias_entry *ptr;
-
-		ptr = list_entry(pos, struct tomoyo_alias_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n",
-					ptr->original_name->name,
-					ptr->aliased_name->name);
-		if (!done)
-			break;
-	}
-	return done;
-}
-
-/**
- * tomoyo_write_alias_policy - Write "struct tomoyo_alias_entry" list.
+ * tomoyo_write_aggregator - Write "struct tomoyo_aggregator" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -606,18 +342,18 @@ bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head)
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_alias_policy(char *data, const bool is_delete)
+int tomoyo_write_aggregator(char *data, const bool is_delete)
 {
 	char *cp = strchr(data, ' ');
 
 	if (!cp)
 		return -EINVAL;
 	*cp++ = '\0';
-	return tomoyo_update_alias_entry(data, cp, is_delete);
+	return tomoyo_update_aggregator_entry(data, cp, is_delete);
 }
 
 /**
- * tomoyo_find_or_assign_new_domain - Create a domain.
+ * tomoyo_assign_domain - Create a domain.
  *
  * @domainname: The name of domain.
  * @profile:    Profile number to assign if the domain was newly created.
@@ -626,16 +362,15 @@ int tomoyo_write_alias_policy(char *data, const bool is_delete)
  *
  * Caller holds tomoyo_read_lock().
  */
-struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
-							    domainname,
-							    const u8 profile)
+struct tomoyo_domain_info *tomoyo_assign_domain(const char *domainname,
+						const u8 profile)
 {
 	struct tomoyo_domain_info *entry;
 	struct tomoyo_domain_info *domain = NULL;
 	const struct tomoyo_path_info *saved_domainname;
 	bool found = false;
 
-	if (!tomoyo_is_correct_domain(domainname))
+	if (!tomoyo_correct_domain(domainname))
 		return NULL;
 	saved_domainname = tomoyo_get_name(domainname);
 	if (!saved_domainname)
@@ -678,116 +413,118 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
  */
 int tomoyo_find_next_domain(struct linux_binprm *bprm)
 {
-	/*
-	 * This function assumes that the size of buffer returned by
-	 * tomoyo_realpath() = TOMOYO_MAX_PATHNAME_LEN.
-	 */
-	struct tomoyo_page_buffer *tmp = kzalloc(sizeof(*tmp), GFP_NOFS);
+	struct tomoyo_request_info r;
+	char *tmp = kzalloc(TOMOYO_EXEC_TMPSIZE, GFP_NOFS);
 	struct tomoyo_domain_info *old_domain = tomoyo_domain();
 	struct tomoyo_domain_info *domain = NULL;
-	const char *old_domain_name = old_domain->domainname->name;
 	const char *original_name = bprm->filename;
-	char *new_domain_name = NULL;
-	char *real_program_name = NULL;
-	char *symlink_program_name = NULL;
-	const u8 mode = tomoyo_check_flags(old_domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	u8 mode;
+	bool is_enforce;
 	int retval = -ENOMEM;
-	struct tomoyo_path_info r; /* real name */
-	struct tomoyo_path_info s; /* symlink name */
-	struct tomoyo_path_info l; /* last name */
-	static bool initialized;
+	bool need_kfree = false;
+	struct tomoyo_path_info rn = { }; /* real name */
 
+	mode = tomoyo_init_request_info(&r, NULL, TOMOYO_MAC_FILE_EXECUTE);
+	is_enforce = (mode == TOMOYO_CONFIG_ENFORCING);
 	if (!tmp)
 		goto out;
 
-	if (!initialized) {
-		/*
-		 * Built-in initializers. This is needed because policies are
-		 * not loaded until starting /sbin/init.
-		 */
-		tomoyo_update_domain_initializer_entry(NULL, "/sbin/hotplug",
-						       false, false);
-		tomoyo_update_domain_initializer_entry(NULL, "/sbin/modprobe",
-						       false, false);
-		initialized = true;
+ retry:
+	if (need_kfree) {
+		kfree(rn.name);
+		need_kfree = false;
 	}
-
-	/* Get tomoyo_realpath of program. */
+	/* Get symlink's pathname of program. */
 	retval = -ENOENT;
-	/* I hope tomoyo_realpath() won't fail with -ENOMEM. */
-	real_program_name = tomoyo_realpath(original_name);
-	if (!real_program_name)
-		goto out;
-	/* Get tomoyo_realpath of symbolic link. */
-	symlink_program_name = tomoyo_realpath_nofollow(original_name);
-	if (!symlink_program_name)
+	rn.name = tomoyo_realpath_nofollow(original_name);
+	if (!rn.name)
 		goto out;
-
-	r.name = real_program_name;
-	tomoyo_fill_path_info(&r);
-	s.name = symlink_program_name;
-	tomoyo_fill_path_info(&s);
-	l.name = tomoyo_get_last_name(old_domain);
-	tomoyo_fill_path_info(&l);
-
-	/* Check 'alias' directive. */
-	if (tomoyo_pathcmp(&r, &s)) {
-		struct tomoyo_alias_entry *ptr;
-		/* Is this program allowed to be called via symbolic links? */
-		list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-			if (ptr->is_deleted ||
-			    tomoyo_pathcmp(&r, ptr->original_name) ||
-			    tomoyo_pathcmp(&s, ptr->aliased_name))
+	tomoyo_fill_path_info(&rn);
+	need_kfree = true;
+
+	/* Check 'aggregator' directive. */
+	{
+		struct tomoyo_aggregator *ptr;
+		list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+					[TOMOYO_ID_AGGREGATOR], head.list) {
+			if (ptr->head.is_deleted ||
+			    !tomoyo_path_matches_pattern(&rn,
+							 ptr->original_name))
 				continue;
-			memset(real_program_name, 0, TOMOYO_MAX_PATHNAME_LEN);
-			strncpy(real_program_name, ptr->aliased_name->name,
-				TOMOYO_MAX_PATHNAME_LEN - 1);
-			tomoyo_fill_path_info(&r);
+			kfree(rn.name);
+			need_kfree = false;
+			/* This is OK because it is read only. */
+			rn = *ptr->aggregated_name;
 			break;
 		}
 	}
 
 	/* Check execute permission. */
-	retval = tomoyo_check_exec_perm(old_domain, &r);
+	retval = tomoyo_path_permission(&r, TOMOYO_TYPE_EXECUTE, &rn);
+	if (retval == TOMOYO_RETRY_REQUEST)
+		goto retry;
 	if (retval < 0)
 		goto out;
+	/*
+	 * To be able to specify domainnames with wildcards, use the
+	 * pathname specified in the policy (which may contain
+	 * wildcard) rather than the pathname passed to execve()
+	 * (which never contains wildcard).
+	 */
+	if (r.param.path.matched_path) {
+		if (need_kfree)
+			kfree(rn.name);
+		need_kfree = false;
+		/* This is OK because it is read only. */
+		rn = *r.param.path.matched_path;
+	}
 
-	new_domain_name = tmp->buffer;
-	if (tomoyo_is_domain_initializer(old_domain->domainname, &r, &l)) {
+	/* Calculate domain to transit to. */
+	switch (tomoyo_transition_type(old_domain->domainname, &rn)) {
+	case TOMOYO_TRANSITION_CONTROL_INITIALIZE:
 		/* Transit to the child of tomoyo_kernel_domain domain. */
-		snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1,
-			 TOMOYO_ROOT_NAME " " "%s", real_program_name);
-	} else if (old_domain == &tomoyo_kernel_domain &&
-		   !tomoyo_policy_loaded) {
-		/*
-		 * Needn't to transit from kernel domain before starting
-		 * /sbin/init. But transit from kernel domain if executing
-		 * initializers because they might start before /sbin/init.
-		 */
-		domain = old_domain;
-	} else if (tomoyo_is_domain_keeper(old_domain->domainname, &r, &l)) {
+		snprintf(tmp, TOMOYO_EXEC_TMPSIZE - 1, TOMOYO_ROOT_NAME " "
+			 "%s", rn.name);
+		break;
+	case TOMOYO_TRANSITION_CONTROL_KEEP:
 		/* Keep current domain. */
 		domain = old_domain;
-	} else {
-		/* Normal domain transition. */
-		snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1,
-			 "%s %s", old_domain_name, real_program_name);
+		break;
+	default:
+		if (old_domain == &tomoyo_kernel_domain &&
+		    !tomoyo_policy_loaded) {
+			/*
+			 * Needn't to transit from kernel domain before
+			 * starting /sbin/init. But transit from kernel domain
+			 * if executing initializers because they might start
+			 * before /sbin/init.
+			 */
+			domain = old_domain;
+		} else {
+			/* Normal domain transition. */
+			snprintf(tmp, TOMOYO_EXEC_TMPSIZE - 1, "%s %s",
+				 old_domain->domainname->name, rn.name);
+		}
+		break;
 	}
-	if (domain || strlen(new_domain_name) >= TOMOYO_MAX_PATHNAME_LEN)
+	if (domain || strlen(tmp) >= TOMOYO_EXEC_TMPSIZE - 10)
 		goto done;
-	domain = tomoyo_find_domain(new_domain_name);
+	domain = tomoyo_find_domain(tmp);
 	if (domain)
 		goto done;
-	if (is_enforce)
-		goto done;
-	domain = tomoyo_find_or_assign_new_domain(new_domain_name,
-						  old_domain->profile);
+	if (is_enforce) {
+		int error = tomoyo_supervisor(&r, "# wants to create domain\n"
+					      "%s\n", tmp);
+		if (error == TOMOYO_RETRY_REQUEST)
+			goto retry;
+		if (error < 0)
+			goto done;
+	}
+	domain = tomoyo_assign_domain(tmp, old_domain->profile);
  done:
 	if (domain)
 		goto out;
-	printk(KERN_WARNING "TOMOYO-ERROR: Domain '%s' not defined.\n",
-	       new_domain_name);
+	printk(KERN_WARNING "TOMOYO-ERROR: Domain '%s' not defined.\n", tmp);
 	if (is_enforce)
 		retval = -EPERM;
 	else
@@ -798,8 +535,8 @@ int tomoyo_find_next_domain(struct linux_binprm *bprm)
 	/* Update reference count on "struct tomoyo_domain_info". */
 	atomic_inc(&domain->users);
 	bprm->cred->security = domain;
-	kfree(real_program_name);
-	kfree(symlink_program_name);
+	if (need_kfree)
+		kfree(rn.name);
 	kfree(tmp);
 	return retval;
 }
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 1c6f8238ec4..9d32f182301 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -1,48 +1,88 @@
 /*
  * security/tomoyo/file.c
  *
- * Implementation of the Domain-Based Mandatory Access Control.
- *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
+ * Pathname restriction functions.
  *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include "common.h"
 #include <linux/slab.h>
 
-/* Keyword array for single path operations. */
-static const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION] = {
+/* Keyword array for operations with one pathname. */
+const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION] = {
 	[TOMOYO_TYPE_READ_WRITE] = "read/write",
 	[TOMOYO_TYPE_EXECUTE]    = "execute",
 	[TOMOYO_TYPE_READ]       = "read",
 	[TOMOYO_TYPE_WRITE]      = "write",
-	[TOMOYO_TYPE_CREATE]     = "create",
 	[TOMOYO_TYPE_UNLINK]     = "unlink",
-	[TOMOYO_TYPE_MKDIR]      = "mkdir",
 	[TOMOYO_TYPE_RMDIR]      = "rmdir",
-	[TOMOYO_TYPE_MKFIFO]     = "mkfifo",
-	[TOMOYO_TYPE_MKSOCK]     = "mksock",
-	[TOMOYO_TYPE_MKBLOCK]    = "mkblock",
-	[TOMOYO_TYPE_MKCHAR]     = "mkchar",
 	[TOMOYO_TYPE_TRUNCATE]   = "truncate",
 	[TOMOYO_TYPE_SYMLINK]    = "symlink",
 	[TOMOYO_TYPE_REWRITE]    = "rewrite",
+	[TOMOYO_TYPE_CHROOT]     = "chroot",
+	[TOMOYO_TYPE_UMOUNT]     = "unmount",
+};
+
+/* Keyword array for operations with one pathname and three numbers. */
+const char *tomoyo_mkdev_keyword[TOMOYO_MAX_MKDEV_OPERATION] = {
+	[TOMOYO_TYPE_MKBLOCK]    = "mkblock",
+	[TOMOYO_TYPE_MKCHAR]     = "mkchar",
+};
+
+/* Keyword array for operations with two pathnames. */
+const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION] = {
+	[TOMOYO_TYPE_LINK]       = "link",
+	[TOMOYO_TYPE_RENAME]     = "rename",
+	[TOMOYO_TYPE_PIVOT_ROOT] = "pivot_root",
+};
+
+/* Keyword array for operations with one pathname and one number. */
+const char *tomoyo_path_number_keyword[TOMOYO_MAX_PATH_NUMBER_OPERATION] = {
+	[TOMOYO_TYPE_CREATE]     = "create",
+	[TOMOYO_TYPE_MKDIR]      = "mkdir",
+	[TOMOYO_TYPE_MKFIFO]     = "mkfifo",
+	[TOMOYO_TYPE_MKSOCK]     = "mksock",
 	[TOMOYO_TYPE_IOCTL]      = "ioctl",
 	[TOMOYO_TYPE_CHMOD]      = "chmod",
 	[TOMOYO_TYPE_CHOWN]      = "chown",
 	[TOMOYO_TYPE_CHGRP]      = "chgrp",
-	[TOMOYO_TYPE_CHROOT]     = "chroot",
-	[TOMOYO_TYPE_MOUNT]      = "mount",
-	[TOMOYO_TYPE_UMOUNT]     = "unmount",
 };
 
-/* Keyword array for double path operations. */
-static const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION] = {
-	[TOMOYO_TYPE_LINK]    = "link",
-	[TOMOYO_TYPE_RENAME]  = "rename",
-	[TOMOYO_TYPE_PIVOT_ROOT] = "pivot_root",
+static const u8 tomoyo_p2mac[TOMOYO_MAX_PATH_OPERATION] = {
+	[TOMOYO_TYPE_READ_WRITE] = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_EXECUTE]    = TOMOYO_MAC_FILE_EXECUTE,
+	[TOMOYO_TYPE_READ]       = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_WRITE]      = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_UNLINK]     = TOMOYO_MAC_FILE_UNLINK,
+	[TOMOYO_TYPE_RMDIR]      = TOMOYO_MAC_FILE_RMDIR,
+	[TOMOYO_TYPE_TRUNCATE]   = TOMOYO_MAC_FILE_TRUNCATE,
+	[TOMOYO_TYPE_SYMLINK]    = TOMOYO_MAC_FILE_SYMLINK,
+	[TOMOYO_TYPE_REWRITE]    = TOMOYO_MAC_FILE_REWRITE,
+	[TOMOYO_TYPE_CHROOT]     = TOMOYO_MAC_FILE_CHROOT,
+	[TOMOYO_TYPE_UMOUNT]     = TOMOYO_MAC_FILE_UMOUNT,
+};
+
+static const u8 tomoyo_pnnn2mac[TOMOYO_MAX_MKDEV_OPERATION] = {
+	[TOMOYO_TYPE_MKBLOCK] = TOMOYO_MAC_FILE_MKBLOCK,
+	[TOMOYO_TYPE_MKCHAR]  = TOMOYO_MAC_FILE_MKCHAR,
+};
+
+static const u8 tomoyo_pp2mac[TOMOYO_MAX_PATH2_OPERATION] = {
+	[TOMOYO_TYPE_LINK]       = TOMOYO_MAC_FILE_LINK,
+	[TOMOYO_TYPE_RENAME]     = TOMOYO_MAC_FILE_RENAME,
+	[TOMOYO_TYPE_PIVOT_ROOT] = TOMOYO_MAC_FILE_PIVOT_ROOT,
+};
+
+static const u8 tomoyo_pn2mac[TOMOYO_MAX_PATH_NUMBER_OPERATION] = {
+	[TOMOYO_TYPE_CREATE] = TOMOYO_MAC_FILE_CREATE,
+	[TOMOYO_TYPE_MKDIR]  = TOMOYO_MAC_FILE_MKDIR,
+	[TOMOYO_TYPE_MKFIFO] = TOMOYO_MAC_FILE_MKFIFO,
+	[TOMOYO_TYPE_MKSOCK] = TOMOYO_MAC_FILE_MKSOCK,
+	[TOMOYO_TYPE_IOCTL]  = TOMOYO_MAC_FILE_IOCTL,
+	[TOMOYO_TYPE_CHMOD]  = TOMOYO_MAC_FILE_CHMOD,
+	[TOMOYO_TYPE_CHOWN]  = TOMOYO_MAC_FILE_CHOWN,
+	[TOMOYO_TYPE_CHGRP]  = TOMOYO_MAC_FILE_CHGRP,
 };
 
 void tomoyo_put_name_union(struct tomoyo_name_union *ptr)
@@ -50,56 +90,45 @@ void tomoyo_put_name_union(struct tomoyo_name_union *ptr)
 	if (!ptr)
 		return;
 	if (ptr->is_group)
-		tomoyo_put_path_group(ptr->group);
+		tomoyo_put_group(ptr->group);
 	else
 		tomoyo_put_name(ptr->filename);
 }
 
-bool tomoyo_compare_name_union(const struct tomoyo_path_info *name,
-			       const struct tomoyo_name_union *ptr)
+const struct tomoyo_path_info *
+tomoyo_compare_name_union(const struct tomoyo_path_info *name,
+			  const struct tomoyo_name_union *ptr)
 {
 	if (ptr->is_group)
-		return tomoyo_path_matches_group(name, ptr->group, 1);
-	return tomoyo_path_matches_pattern(name, ptr->filename);
+		return tomoyo_path_matches_group(name, ptr->group);
+	if (tomoyo_path_matches_pattern(name, ptr->filename))
+		return ptr->filename;
+	return NULL;
 }
 
-static bool tomoyo_compare_name_union_pattern(const struct tomoyo_path_info
-					      *name,
-					      const struct tomoyo_name_union
-					      *ptr, const bool may_use_pattern)
+void tomoyo_put_number_union(struct tomoyo_number_union *ptr)
 {
-	if (ptr->is_group)
-		return tomoyo_path_matches_group(name, ptr->group,
-						 may_use_pattern);
-	if (may_use_pattern || !ptr->filename->is_patterned)
-		return tomoyo_path_matches_pattern(name, ptr->filename);
-	return false;
+	if (ptr && ptr->is_group)
+		tomoyo_put_group(ptr->group);
 }
 
-/**
- * tomoyo_path2keyword - Get the name of single path operation.
- *
- * @operation: Type of operation.
- *
- * Returns the name of single path operation.
- */
-const char *tomoyo_path2keyword(const u8 operation)
+bool tomoyo_compare_number_union(const unsigned long value,
+				 const struct tomoyo_number_union *ptr)
 {
-	return (operation < TOMOYO_MAX_PATH_OPERATION)
-		? tomoyo_path_keyword[operation] : NULL;
+	if (ptr->is_group)
+		return tomoyo_number_matches_group(value, value, ptr->group);
+	return value >= ptr->values[0] && value <= ptr->values[1];
 }
 
-/**
- * tomoyo_path22keyword - Get the name of double path operation.
- *
- * @operation: Type of operation.
- *
- * Returns the name of double path operation.
- */
-const char *tomoyo_path22keyword(const u8 operation)
+static void tomoyo_add_slash(struct tomoyo_path_info *buf)
 {
-	return (operation < TOMOYO_MAX_PATH2_OPERATION)
-		? tomoyo_path2_keyword[operation] : NULL;
+	if (buf->is_dir)
+		return;
+	/*
+	 * This is OK because tomoyo_encode() reserves space for appending "/".
+	 */
+	strcat((char *) buf->name, "/");
+	tomoyo_fill_path_info(buf);
 }
 
 /**
@@ -121,69 +150,134 @@ static bool tomoyo_strendswith(const char *name, const char *tail)
 }
 
 /**
- * tomoyo_get_path - Get realpath.
+ * tomoyo_get_realpath - Get realpath.
  *
+ * @buf:  Pointer to "struct tomoyo_path_info".
  * @path: Pointer to "struct path".
  *
- * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
+ * Returns true on success, false otherwise.
  */
-static struct tomoyo_path_info *tomoyo_get_path(struct path *path)
+static bool tomoyo_get_realpath(struct tomoyo_path_info *buf, struct path *path)
 {
-	int error;
-	struct tomoyo_path_info_with_data *buf = kzalloc(sizeof(*buf),
-							 GFP_NOFS);
-
-	if (!buf)
-		return NULL;
-	/* Reserve one byte for appending "/". */
-	error = tomoyo_realpath_from_path2(path, buf->body,
-					   sizeof(buf->body) - 2);
-	if (!error) {
-		buf->head.name = buf->body;
-		tomoyo_fill_path_info(&buf->head);
-		return &buf->head;
+	buf->name = tomoyo_realpath_from_path(path);
+	if (buf->name) {
+		tomoyo_fill_path_info(buf);
+		return true;
 	}
-	kfree(buf);
-	return NULL;
+        return false;
 }
 
-static int tomoyo_update_path2_acl(const u8 type, const char *filename1,
-				   const char *filename2,
-				   struct tomoyo_domain_info *const domain,
-				   const bool is_delete);
-static int tomoyo_update_path_acl(const u8 type, const char *filename,
-				  struct tomoyo_domain_info *const domain,
-				  const bool is_delete);
-
-/*
- * tomoyo_globally_readable_list is used for holding list of pathnames which
- * are by default allowed to be open()ed for reading by any process.
+/**
+ * tomoyo_audit_path_log - Audit path request log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
  *
- * An entry is added by
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_path_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_path_keyword[r->param.path.operation];
+	const struct tomoyo_path_info *filename = r->param.path.filename;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s", operation, filename->name);
+	return tomoyo_supervisor(r, "allow_%s %s\n", operation,
+				 tomoyo_pattern(filename));
+}
+
+/**
+ * tomoyo_audit_path2_log - Audit path/path request log.
  *
- * # echo 'allow_read /lib/libc-2.5.so' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
+ * @r: Pointer to "struct tomoyo_request_info".
  *
- * and is deleted by
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_path2_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_path2_keyword[r->param.path2.operation];
+	const struct tomoyo_path_info *filename1 = r->param.path2.filename1;
+	const struct tomoyo_path_info *filename2 = r->param.path2.filename2;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s %s", operation, filename1->name,
+			filename2->name);
+	return tomoyo_supervisor(r, "allow_%s %s %s\n", operation,
+				 tomoyo_pattern(filename1),
+				 tomoyo_pattern(filename2));
+}
+
+/**
+ * tomoyo_audit_mkdev_log - Audit path/number/number/number request log.
  *
- * # echo 'delete allow_read /lib/libc-2.5.so' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
+ * @r: Pointer to "struct tomoyo_request_info".
  *
- * and all entries are retrieved by
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_mkdev_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_mkdev_keyword[r->param.mkdev.operation];
+	const struct tomoyo_path_info *filename = r->param.mkdev.filename;
+	const unsigned int major = r->param.mkdev.major;
+	const unsigned int minor = r->param.mkdev.minor;
+	const unsigned int mode = r->param.mkdev.mode;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s 0%o %u %u", operation, filename->name, mode,
+			major, minor);
+	return tomoyo_supervisor(r, "allow_%s %s 0%o %u %u\n", operation,
+				 tomoyo_pattern(filename), mode, major, minor);
+}
+
+/**
+ * tomoyo_audit_path_number_log - Audit path/number request log.
  *
- * # grep ^allow_read /sys/kernel/security/tomoyo/exception_policy
+ * @r:     Pointer to "struct tomoyo_request_info".
+ * @error: Error code.
  *
- * In the example above, any process is allowed to
- * open("/lib/libc-2.5.so", O_RDONLY).
- * One exception is, if the domain which current process belongs to is marked
- * as "ignore_global_allow_read", current process can't do so unless explicitly
- * given "allow_read /lib/libc-2.5.so" to the domain which current process
- * belongs to.
+ * Returns 0 on success, negative value otherwise.
  */
-LIST_HEAD(tomoyo_globally_readable_list);
+static int tomoyo_audit_path_number_log(struct tomoyo_request_info *r)
+{
+	const u8 type = r->param.path_number.operation;
+	u8 radix;
+	const struct tomoyo_path_info *filename = r->param.path_number.filename;
+	const char *operation = tomoyo_path_number_keyword[type];
+	char buffer[64];
+	if (r->granted)
+		return 0;
+	switch (type) {
+	case TOMOYO_TYPE_CREATE:
+	case TOMOYO_TYPE_MKDIR:
+	case TOMOYO_TYPE_MKFIFO:
+	case TOMOYO_TYPE_MKSOCK:
+	case TOMOYO_TYPE_CHMOD:
+		radix = TOMOYO_VALUE_TYPE_OCTAL;
+		break;
+	case TOMOYO_TYPE_IOCTL:
+		radix = TOMOYO_VALUE_TYPE_HEXADECIMAL;
+		break;
+	default:
+		radix = TOMOYO_VALUE_TYPE_DECIMAL;
+		break;
+	}
+	tomoyo_print_ulong(buffer, sizeof(buffer), r->param.path_number.number,
+			   radix);
+	tomoyo_warn_log(r, "%s %s %s", operation, filename->name, buffer);
+	return tomoyo_supervisor(r, "allow_%s %s %s\n", operation,
+				 tomoyo_pattern(filename), buffer);
+}
+
+static bool tomoyo_same_globally_readable(const struct tomoyo_acl_head *a,
+					  const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_readable_file,
+			    head)->filename ==
+		container_of(b, struct tomoyo_readable_file,
+			     head)->filename;
+}
 
 /**
- * tomoyo_update_globally_readable_entry - Update "struct tomoyo_globally_readable_file_entry" list.
+ * tomoyo_update_globally_readable_entry - Update "struct tomoyo_readable_file" list.
  *
  * @filename:  Filename unconditionally permitted to open() for reading.
  * @is_delete: True if it is a delete request.
@@ -195,41 +289,24 @@ LIST_HEAD(tomoyo_globally_readable_list);
 static int tomoyo_update_globally_readable_entry(const char *filename,
 						 const bool is_delete)
 {
-	struct tomoyo_globally_readable_file_entry *ptr;
-	struct tomoyo_globally_readable_file_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_readable_file e = { };
+	int error;
 
-	if (!tomoyo_is_correct_path(filename, 1, 0, -1))
+	if (!tomoyo_correct_word(filename))
 		return -EINVAL;
 	e.filename = tomoyo_get_name(filename);
 	if (!e.filename)
 		return -ENOMEM;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list, list) {
-		if (ptr->filename != e.filename)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_globally_readable_file_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_globally_readable_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list
+				     [TOMOYO_ID_GLOBALLY_READABLE],
+				     tomoyo_same_globally_readable);
 	tomoyo_put_name(e.filename);
 	return error;
 }
 
 /**
- * tomoyo_is_globally_readable_file - Check if the file is unconditionnaly permitted to be open()ed for reading.
+ * tomoyo_globally_readable_file - Check if the file is unconditionnaly permitted to be open()ed for reading.
  *
  * @filename: The filename to check.
  *
@@ -237,14 +314,15 @@ static int tomoyo_update_globally_readable_entry(const char *filename,
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_globally_readable_file(const struct tomoyo_path_info *
+static bool tomoyo_globally_readable_file(const struct tomoyo_path_info *
 					     filename)
 {
-	struct tomoyo_globally_readable_file_entry *ptr;
+	struct tomoyo_readable_file *ptr;
 	bool found = false;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list, list) {
-		if (!ptr->is_deleted &&
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+				[TOMOYO_ID_GLOBALLY_READABLE], head.list) {
+		if (!ptr->head.is_deleted &&
 		    tomoyo_path_matches_pattern(filename, ptr->filename)) {
 			found = true;
 			break;
@@ -254,7 +332,7 @@ static bool tomoyo_is_globally_readable_file(const struct tomoyo_path_info *
 }
 
 /**
- * tomoyo_write_globally_readable_policy - Write "struct tomoyo_globally_readable_file_entry" list.
+ * tomoyo_write_globally_readable - Write "struct tomoyo_readable_file" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -263,74 +341,20 @@ static bool tomoyo_is_globally_readable_file(const struct tomoyo_path_info *
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_globally_readable_policy(char *data, const bool is_delete)
+int tomoyo_write_globally_readable(char *data, const bool is_delete)
 {
 	return tomoyo_update_globally_readable_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_globally_readable_policy - Read "struct tomoyo_globally_readable_file_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_same_pattern(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_globally_readable_list) {
-		struct tomoyo_globally_readable_file_entry *ptr;
-		ptr = list_entry(pos,
-				 struct tomoyo_globally_readable_file_entry,
-				 list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n",
-					ptr->filename->name);
-		if (!done)
-			break;
-	}
-	return done;
+	return container_of(a, struct tomoyo_no_pattern, head)->pattern ==
+		container_of(b, struct tomoyo_no_pattern, head)->pattern;
 }
 
-/* tomoyo_pattern_list is used for holding list of pathnames which are used for
- * converting pathnames to pathname patterns during learning mode.
- *
- * An entry is added by
- *
- * # echo 'file_pattern /proc/\$/mounts' > \
- *                             /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete file_pattern /proc/\$/mounts' > \
- *                             /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^file_pattern /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if a process which belongs to a domain which is in
- * learning mode requested open("/proc/1/mounts", O_RDONLY),
- * "allow_read /proc/\$/mounts" is automatically added to the domain which that
- * process belongs to.
- *
- * It is not a desirable behavior that we have to use /proc/\$/ instead of
- * /proc/self/ when current process needs to access only current process's
- * information. As of now, LSM version of TOMOYO is using __d_path() for
- * calculating pathname. Non LSM version of TOMOYO is using its own function
- * which pretends as if /proc/self/ is not a symlink; so that we can forbid
- * current process from accessing other process's information.
- */
-LIST_HEAD(tomoyo_pattern_list);
-
 /**
- * tomoyo_update_file_pattern_entry - Update "struct tomoyo_pattern_entry" list.
+ * tomoyo_update_file_pattern_entry - Update "struct tomoyo_no_pattern" list.
  *
  * @pattern:   Pathname pattern.
  * @is_delete: True if it is a delete request.
@@ -342,39 +366,23 @@ LIST_HEAD(tomoyo_pattern_list);
 static int tomoyo_update_file_pattern_entry(const char *pattern,
 					    const bool is_delete)
 {
-	struct tomoyo_pattern_entry *ptr;
-	struct tomoyo_pattern_entry e = { .pattern = tomoyo_get_name(pattern) };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_no_pattern e = { };
+	int error;
 
+	if (!tomoyo_correct_word(pattern))
+		return -EINVAL;
+	e.pattern = tomoyo_get_name(pattern);
 	if (!e.pattern)
-		return error;
-	if (!e.pattern->is_patterned)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-		if (e.pattern != ptr->pattern)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_pattern_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &tomoyo_pattern_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+		return -ENOMEM;
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_PATTERN],
+				     tomoyo_same_pattern);
 	tomoyo_put_name(e.pattern);
 	return error;
 }
 
 /**
- * tomoyo_get_file_pattern - Get patterned pathname.
+ * tomoyo_pattern - Get patterned pathname.
  *
  * @filename: The filename to find patterned pathname.
  *
@@ -382,14 +390,14 @@ static int tomoyo_update_file_pattern_entry(const char *pattern,
  *
  * Caller holds tomoyo_read_lock().
  */
-static const struct tomoyo_path_info *
-tomoyo_get_file_pattern(const struct tomoyo_path_info *filename)
+const char *tomoyo_pattern(const struct tomoyo_path_info *filename)
 {
-	struct tomoyo_pattern_entry *ptr;
+	struct tomoyo_no_pattern *ptr;
 	const struct tomoyo_path_info *pattern = NULL;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-		if (ptr->is_deleted)
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_PATTERN],
+				head.list) {
+		if (ptr->head.is_deleted)
 			continue;
 		if (!tomoyo_path_matches_pattern(filename, ptr->pattern))
 			continue;
@@ -403,11 +411,11 @@ tomoyo_get_file_pattern(const struct tomoyo_path_info *filename)
 	}
 	if (pattern)
 		filename = pattern;
-	return filename;
+	return filename->name;
 }
 
 /**
- * tomoyo_write_pattern_policy - Write "struct tomoyo_pattern_entry" list.
+ * tomoyo_write_pattern - Write "struct tomoyo_no_pattern" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -416,71 +424,21 @@ tomoyo_get_file_pattern(const struct tomoyo_path_info *filename)
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_pattern_policy(char *data, const bool is_delete)
+int tomoyo_write_pattern(char *data, const bool is_delete)
 {
 	return tomoyo_update_file_pattern_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_file_pattern - Read "struct tomoyo_pattern_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head)
+static bool tomoyo_same_no_rewrite(const struct tomoyo_acl_head *a,
+				   const struct tomoyo_acl_head *b)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_pattern_list) {
-		struct tomoyo_pattern_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_pattern_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN
-					"%s\n", ptr->pattern->name);
-		if (!done)
-			break;
-	}
-	return done;
+	return container_of(a, struct tomoyo_no_rewrite, head)->pattern
+		== container_of(b, struct tomoyo_no_rewrite, head)
+		->pattern;
 }
 
-/*
- * tomoyo_no_rewrite_list is used for holding list of pathnames which are by
- * default forbidden to modify already written content of a file.
- *
- * An entry is added by
- *
- * # echo 'deny_rewrite /var/log/messages' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete deny_rewrite /var/log/messages' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^deny_rewrite /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if a process requested to rewrite /var/log/messages ,
- * the process can't rewrite unless the domain which that process belongs to
- * has "allow_rewrite /var/log/messages" entry.
- *
- * It is not a desirable behavior that we have to add "\040(deleted)" suffix
- * when we want to allow rewriting already unlink()ed file. As of now,
- * LSM version of TOMOYO is using __d_path() for calculating pathname.
- * Non LSM version of TOMOYO is using its own function which doesn't append
- * " (deleted)" suffix if the file is already unlink()ed; so that we don't
- * need to worry whether the file is already unlink()ed or not.
- */
-LIST_HEAD(tomoyo_no_rewrite_list);
-
 /**
- * tomoyo_update_no_rewrite_entry - Update "struct tomoyo_no_rewrite_entry" list.
+ * tomoyo_update_no_rewrite_entry - Update "struct tomoyo_no_rewrite" list.
  *
  * @pattern:   Pathname pattern that are not rewritable by default.
  * @is_delete: True if it is a delete request.
@@ -492,41 +450,23 @@ LIST_HEAD(tomoyo_no_rewrite_list);
 static int tomoyo_update_no_rewrite_entry(const char *pattern,
 					  const bool is_delete)
 {
-	struct tomoyo_no_rewrite_entry *ptr;
-	struct tomoyo_no_rewrite_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_no_rewrite e = { };
+	int error;
 
-	if (!tomoyo_is_correct_path(pattern, 0, 0, 0))
+	if (!tomoyo_correct_word(pattern))
 		return -EINVAL;
 	e.pattern = tomoyo_get_name(pattern);
 	if (!e.pattern)
-		return error;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-		if (ptr->pattern != e.pattern)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_no_rewrite_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_no_rewrite_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+		return -ENOMEM;
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_NO_REWRITE],
+				     tomoyo_same_no_rewrite);
 	tomoyo_put_name(e.pattern);
 	return error;
 }
 
 /**
- * tomoyo_is_no_rewrite_file - Check if the given pathname is not permitted to be rewrited.
+ * tomoyo_no_rewrite_file - Check if the given pathname is not permitted to be rewrited.
  *
  * @filename: Filename to check.
  *
@@ -535,13 +475,14 @@ static int tomoyo_update_no_rewrite_entry(const char *pattern,
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_no_rewrite_file(const struct tomoyo_path_info *filename)
+static bool tomoyo_no_rewrite_file(const struct tomoyo_path_info *filename)
 {
-	struct tomoyo_no_rewrite_entry *ptr;
+	struct tomoyo_no_rewrite *ptr;
 	bool found = false;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-		if (ptr->is_deleted)
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_NO_REWRITE],
+				head.list) {
+		if (ptr->head.is_deleted)
 			continue;
 		if (!tomoyo_path_matches_pattern(filename, ptr->pattern))
 			continue;
@@ -552,7 +493,7 @@ static bool tomoyo_is_no_rewrite_file(const struct tomoyo_path_info *filename)
 }
 
 /**
- * tomoyo_write_no_rewrite_policy - Write "struct tomoyo_no_rewrite_entry" list.
+ * tomoyo_write_no_rewrite - Write "struct tomoyo_no_rewrite" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -561,214 +502,103 @@ static bool tomoyo_is_no_rewrite_file(const struct tomoyo_path_info *filename)
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete)
+int tomoyo_write_no_rewrite(char *data, const bool is_delete)
 {
 	return tomoyo_update_no_rewrite_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_no_rewrite_policy - Read "struct tomoyo_no_rewrite_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_check_path_acl(struct tomoyo_request_info *r,
+				  const struct tomoyo_acl_info *ptr)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_no_rewrite_list) {
-		struct tomoyo_no_rewrite_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_no_rewrite_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE
-					"%s\n", ptr->pattern->name);
-		if (!done)
-			break;
+	const struct tomoyo_path_acl *acl = container_of(ptr, typeof(*acl),
+							 head);
+	if (acl->perm & (1 << r->param.path.operation)) {
+		r->param.path.matched_path =
+			tomoyo_compare_name_union(r->param.path.filename,
+						  &acl->name);
+		return r->param.path.matched_path != NULL;
 	}
-	return done;
+	return false;
 }
 
-/**
- * tomoyo_update_file_acl - Update file's read/write/execute ACL.
- *
- * @filename:  Filename.
- * @perm:      Permission (between 1 to 7).
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * This is legacy support interface for older policy syntax.
- * Current policy syntax uses "allow_read/write" instead of "6",
- * "allow_read" instead of "4", "allow_write" instead of "2",
- * "allow_execute" instead of "1".
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_update_file_acl(const char *filename, u8 perm,
-				  struct tomoyo_domain_info * const domain,
-				  const bool is_delete)
+static bool tomoyo_check_path_number_acl(struct tomoyo_request_info *r,
+					 const struct tomoyo_acl_info *ptr)
 {
-	if (perm > 7 || !perm) {
-		printk(KERN_DEBUG "%s: Invalid permission '%d %s'\n",
-		       __func__, perm, filename);
-		return -EINVAL;
-	}
-	if (filename[0] != '@' && tomoyo_strendswith(filename, "/"))
-		/*
-		 * Only 'allow_mkdir' and 'allow_rmdir' are valid for
-		 * directory permissions.
-		 */
-		return 0;
-	if (perm & 4)
-		tomoyo_update_path_acl(TOMOYO_TYPE_READ, filename, domain,
-				       is_delete);
-	if (perm & 2)
-		tomoyo_update_path_acl(TOMOYO_TYPE_WRITE, filename, domain,
-				       is_delete);
-	if (perm & 1)
-		tomoyo_update_path_acl(TOMOYO_TYPE_EXECUTE, filename, domain,
-				       is_delete);
-	return 0;
+	const struct tomoyo_path_number_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.path_number.operation)) &&
+		tomoyo_compare_number_union(r->param.path_number.number,
+					    &acl->number) &&
+		tomoyo_compare_name_union(r->param.path_number.filename,
+					  &acl->name);
 }
 
-/**
- * tomoyo_path_acl2 - Check permission for single path operation.
- *
- * @domain:          Pointer to "struct tomoyo_domain_info".
- * @filename:        Filename to check.
- * @perm:            Permission.
- * @may_use_pattern: True if patterned ACL is permitted.
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path_acl2(const struct tomoyo_domain_info *domain,
-			    const struct tomoyo_path_info *filename,
-			    const u32 perm, const bool may_use_pattern)
+static bool tomoyo_check_path2_acl(struct tomoyo_request_info *r,
+				   const struct tomoyo_acl_info *ptr)
 {
-	struct tomoyo_acl_info *ptr;
-	int error = -EPERM;
-
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path_acl *acl;
-		if (ptr->type != TOMOYO_TYPE_PATH_ACL)
-			continue;
-		acl = container_of(ptr, struct tomoyo_path_acl, head);
-		if (perm <= 0xFFFF) {
-			if (!(acl->perm & perm))
-				continue;
-		} else {
-			if (!(acl->perm_high & (perm >> 16)))
-				continue;
-		}
-		if (!tomoyo_compare_name_union_pattern(filename, &acl->name,
-                                                       may_use_pattern))
-			continue;
-		error = 0;
-		break;
-	}
-	return error;
+	const struct tomoyo_path2_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.path2.operation)) &&
+		tomoyo_compare_name_union(r->param.path2.filename1, &acl->name1)
+		&& tomoyo_compare_name_union(r->param.path2.filename2,
+					     &acl->name2);
 }
 
-/**
- * tomoyo_check_file_acl - Check permission for opening files.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @filename:  Filename to check.
- * @operation: Mode ("read" or "write" or "read/write" or "execute").
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_check_file_acl(const struct tomoyo_domain_info *domain,
-				 const struct tomoyo_path_info *filename,
-				 const u8 operation)
+static bool tomoyo_check_mkdev_acl(struct tomoyo_request_info *r,
+				const struct tomoyo_acl_info *ptr)
 {
-	u32 perm = 0;
-
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	if (operation == 6)
-		perm = 1 << TOMOYO_TYPE_READ_WRITE;
-	else if (operation == 4)
-		perm = 1 << TOMOYO_TYPE_READ;
-	else if (operation == 2)
-		perm = 1 << TOMOYO_TYPE_WRITE;
-	else if (operation == 1)
-		perm = 1 << TOMOYO_TYPE_EXECUTE;
-	else
-		BUG();
-	return tomoyo_path_acl2(domain, filename, perm, operation != 1);
+	const struct tomoyo_mkdev_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.mkdev.operation)) &&
+		tomoyo_compare_number_union(r->param.mkdev.mode,
+					    &acl->mode) &&
+		tomoyo_compare_number_union(r->param.mkdev.major,
+					    &acl->major) &&
+		tomoyo_compare_number_union(r->param.mkdev.minor,
+					    &acl->minor) &&
+		tomoyo_compare_name_union(r->param.mkdev.filename,
+					  &acl->name);
 }
 
-/**
- * tomoyo_check_file_perm2 - Check permission for opening files.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @filename:  Filename to check.
- * @perm:      Mode ("read" or "write" or "read/write" or "execute").
- * @operation: Operation name passed used for verbose mode.
- * @mode:      Access control mode.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_check_file_perm2(struct tomoyo_domain_info * const domain,
-				   const struct tomoyo_path_info *filename,
-				   const u8 perm, const char *operation,
-				   const u8 mode)
+static bool tomoyo_same_path_acl(const struct tomoyo_acl_info *a,
+				 const struct tomoyo_acl_info *b)
 {
-	const bool is_enforce = (mode == 3);
-	const char *msg = "<unknown>";
-	int error = 0;
+	const struct tomoyo_path_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_path_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head) &&
+		tomoyo_same_name_union(&p1->name, &p2->name);
+}
 
-	if (!filename)
-		return 0;
-	error = tomoyo_check_file_acl(domain, filename, perm);
-	if (error && perm == 4 && !domain->ignore_global_allow_read
-	    && tomoyo_is_globally_readable_file(filename))
-		error = 0;
-	if (perm == 6)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_READ_WRITE);
-	else if (perm == 4)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_READ);
-	else if (perm == 2)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_WRITE);
-	else if (perm == 1)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_EXECUTE);
-	else
-		BUG();
-	if (!error)
-		return 0;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s(%s) %s' denied "
-		       "for %s\n", tomoyo_get_msg(is_enforce), msg, operation,
-		       filename->name, tomoyo_get_last_name(domain));
-	if (is_enforce)
-		return error;
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		/* Don't use patterns for execute permission. */
-		const struct tomoyo_path_info *patterned_file = (perm != 1) ?
-			tomoyo_get_file_pattern(filename) : filename;
-		tomoyo_update_file_acl(patterned_file->name, perm,
-				       domain, false);
+static bool tomoyo_merge_path_acl(struct tomoyo_acl_info *a,
+				  struct tomoyo_acl_info *b,
+				  const bool is_delete)
+{
+	u16 * const a_perm = &container_of(a, struct tomoyo_path_acl, head)
+		->perm;
+	u16 perm = *a_perm;
+	const u16 b_perm = container_of(b, struct tomoyo_path_acl, head)->perm;
+	if (is_delete) {
+		perm &= ~b_perm;
+		if ((perm & TOMOYO_RW_MASK) != TOMOYO_RW_MASK)
+			perm &= ~(1 << TOMOYO_TYPE_READ_WRITE);
+		else if (!(perm & (1 << TOMOYO_TYPE_READ_WRITE)))
+			perm &= ~TOMOYO_RW_MASK;
+	} else {
+		perm |= b_perm;
+		if ((perm & TOMOYO_RW_MASK) == TOMOYO_RW_MASK)
+			perm |= (1 << TOMOYO_TYPE_READ_WRITE);
+		else if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
+			perm |= TOMOYO_RW_MASK;
 	}
-	return 0;
+	*a_perm = perm;
+	return !perm;
 }
 
 /**
- * tomoyo_write_file_policy - Update file related list.
+ * tomoyo_update_path_acl - Update "struct tomoyo_path_acl" list.
  *
- * @data:      String to parse.
+ * @type:      Type of operation.
+ * @filename:  Filename.
  * @domain:    Pointer to "struct tomoyo_domain_info".
  * @is_delete: True if it is a delete request.
  *
@@ -776,48 +606,65 @@ static int tomoyo_check_file_perm2(struct tomoyo_domain_info * const domain,
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain,
-			     const bool is_delete)
+static int tomoyo_update_path_acl(const u8 type, const char *filename,
+				  struct tomoyo_domain_info * const domain,
+				  const bool is_delete)
 {
-	char *filename = strchr(data, ' ');
-	char *filename2;
-	unsigned int perm;
-	u8 type;
-
-	if (!filename)
+	struct tomoyo_path_acl e = {
+		.head.type = TOMOYO_TYPE_PATH_ACL,
+		.perm = 1 << type
+	};
+	int error;
+	if (e.perm == (1 << TOMOYO_TYPE_READ_WRITE))
+		e.perm |= TOMOYO_RW_MASK;
+	if (!tomoyo_parse_name_union(filename, &e.name))
 		return -EINVAL;
-	*filename++ = '\0';
-	if (sscanf(data, "%u", &perm) == 1)
-		return tomoyo_update_file_acl(filename, (u8) perm, domain,
-					      is_delete);
-	if (strncmp(data, "allow_", 6))
-		goto out;
-	data += 6;
-	for (type = 0; type < TOMOYO_MAX_PATH_OPERATION; type++) {
-		if (strcmp(data, tomoyo_path_keyword[type]))
-			continue;
-		return tomoyo_update_path_acl(type, filename, domain,
-					      is_delete);
-	}
-	filename2 = strchr(filename, ' ');
-	if (!filename2)
-		goto out;
-	*filename2++ = '\0';
-	for (type = 0; type < TOMOYO_MAX_PATH2_OPERATION; type++) {
-		if (strcmp(data, tomoyo_path2_keyword[type]))
-			continue;
-		return tomoyo_update_path2_acl(type, filename, filename2,
-					       domain, is_delete);
-	}
- out:
-	return -EINVAL;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path_acl,
+				     tomoyo_merge_path_acl);
+	tomoyo_put_name_union(&e.name);
+	return error;
+}
+
+static bool tomoyo_same_mkdev_acl(const struct tomoyo_acl_info *a,
+					 const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_mkdev_acl *p1 = container_of(a, typeof(*p1),
+								head);
+	const struct tomoyo_mkdev_acl *p2 = container_of(b, typeof(*p2),
+								head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name, &p2->name)
+		&& tomoyo_same_number_union(&p1->mode, &p2->mode)
+		&& tomoyo_same_number_union(&p1->major, &p2->major)
+		&& tomoyo_same_number_union(&p1->minor, &p2->minor);
+}
+
+static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
+					  struct tomoyo_acl_info *b,
+					  const bool is_delete)
+{
+	u8 *const a_perm = &container_of(a, struct tomoyo_mkdev_acl,
+					 head)->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_mkdev_acl, head)
+		->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
 }
 
 /**
- * tomoyo_update_path_acl - Update "struct tomoyo_path_acl" list.
+ * tomoyo_update_mkdev_acl - Update "struct tomoyo_mkdev_acl" list.
  *
  * @type:      Type of operation.
  * @filename:  Filename.
+ * @mode:      Create mode.
+ * @major:     Device major number.
+ * @minor:     Device minor number.
  * @domain:    Pointer to "struct tomoyo_domain_info".
  * @is_delete: True if it is a delete request.
  *
@@ -825,71 +672,58 @@ int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain,
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_path_acl(const u8 type, const char *filename,
-				  struct tomoyo_domain_info *const domain,
-				  const bool is_delete)
+static int tomoyo_update_mkdev_acl(const u8 type, const char *filename,
+					  char *mode, char *major, char *minor,
+					  struct tomoyo_domain_info * const
+					  domain, const bool is_delete)
 {
-	static const u32 tomoyo_rw_mask =
-		(1 << TOMOYO_TYPE_READ) | (1 << TOMOYO_TYPE_WRITE);
-	const u32 perm = 1 << type;
-	struct tomoyo_acl_info *ptr;
-	struct tomoyo_path_acl e = {
-		.head.type = TOMOYO_TYPE_PATH_ACL,
-		.perm_high = perm >> 16,
-		.perm = perm
+	struct tomoyo_mkdev_acl e = {
+		.head.type = TOMOYO_TYPE_MKDEV_ACL,
+		.perm = 1 << type
 	};
 	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (type == TOMOYO_TYPE_READ_WRITE)
-		e.perm |= tomoyo_rw_mask;
-	if (!domain)
-		return -EINVAL;
-	if (!tomoyo_parse_name_union(filename, &e.name))
-		return -EINVAL;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+	if (!tomoyo_parse_name_union(filename, &e.name) ||
+	    !tomoyo_parse_number_union(mode, &e.mode) ||
+	    !tomoyo_parse_number_union(major, &e.major) ||
+	    !tomoyo_parse_number_union(minor, &e.minor))
 		goto out;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path_acl *acl =
-			container_of(ptr, struct tomoyo_path_acl, head);
-		if (!tomoyo_is_same_path_acl(acl, &e))
-			continue;
-		if (is_delete) {
-			if (perm <= 0xFFFF)
-				acl->perm &= ~perm;
-			else
-				acl->perm_high &= ~(perm >> 16);
-			if ((acl->perm & tomoyo_rw_mask) != tomoyo_rw_mask)
-				acl->perm &= ~(1 << TOMOYO_TYPE_READ_WRITE);
-			else if (!(acl->perm & (1 << TOMOYO_TYPE_READ_WRITE)))
-				acl->perm &= ~tomoyo_rw_mask;
-		} else {
-			if (perm <= 0xFFFF)
-				acl->perm |= perm;
-			else
-				acl->perm_high |= (perm >> 16);
-			if ((acl->perm & tomoyo_rw_mask) == tomoyo_rw_mask)
-				acl->perm |= 1 << TOMOYO_TYPE_READ_WRITE;
-			else if (acl->perm & (1 << TOMOYO_TYPE_READ_WRITE))
-				acl->perm |= tomoyo_rw_mask;
-		}
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path_acl *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->head.list,
-					  &domain->acl_info_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_mkdev_acl,
+				     tomoyo_merge_mkdev_acl);
  out:
 	tomoyo_put_name_union(&e.name);
+	tomoyo_put_number_union(&e.mode);
+	tomoyo_put_number_union(&e.major);
+	tomoyo_put_number_union(&e.minor);
 	return error;
 }
 
+static bool tomoyo_same_path2_acl(const struct tomoyo_acl_info *a,
+				  const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_path2_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_path2_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name1, &p2->name1)
+		&& tomoyo_same_name_union(&p1->name2, &p2->name2);
+}
+
+static bool tomoyo_merge_path2_acl(struct tomoyo_acl_info *a,
+				   struct tomoyo_acl_info *b,
+				   const bool is_delete)
+{
+	u8 * const a_perm = &container_of(a, struct tomoyo_path2_acl, head)
+		->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_path2_acl, head)->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
+}
+
 /**
  * tomoyo_update_path2_acl - Update "struct tomoyo_path2_acl" list.
  *
@@ -905,46 +739,20 @@ static int tomoyo_update_path_acl(const u8 type, const char *filename,
  */
 static int tomoyo_update_path2_acl(const u8 type, const char *filename1,
 				   const char *filename2,
-				   struct tomoyo_domain_info *const domain,
+				   struct tomoyo_domain_info * const domain,
 				   const bool is_delete)
 {
-	const u8 perm = 1 << type;
 	struct tomoyo_path2_acl e = {
 		.head.type = TOMOYO_TYPE_PATH2_ACL,
-		.perm = perm
+		.perm = 1 << type
 	};
-	struct tomoyo_acl_info *ptr;
 	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (!domain)
-		return -EINVAL;
 	if (!tomoyo_parse_name_union(filename1, &e.name1) ||
 	    !tomoyo_parse_name_union(filename2, &e.name2))
 		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path2_acl *acl =
-			container_of(ptr, struct tomoyo_path2_acl, head);
-		if (!tomoyo_is_same_path2_acl(acl, &e))
-			continue;
-		if (is_delete)
-			acl->perm &= ~perm;
-		else
-			acl->perm |= perm;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path2_acl *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->head.list,
-					  &domain->acl_info_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path2_acl,
+				     tomoyo_merge_path2_acl);
  out:
 	tomoyo_put_name_union(&e.name1);
 	tomoyo_put_name_union(&e.name2);
@@ -952,134 +760,158 @@ static int tomoyo_update_path2_acl(const u8 type, const char *filename1,
 }
 
 /**
- * tomoyo_path_acl - Check permission for single path operation.
- *
- * @domain:   Pointer to "struct tomoyo_domain_info".
- * @type:     Type of operation.
- * @filename: Filename to check.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path_acl(struct tomoyo_domain_info *domain, const u8 type,
-			   const struct tomoyo_path_info *filename)
-{
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	return tomoyo_path_acl2(domain, filename, 1 << type, 1);
-}
-
-/**
- * tomoyo_path2_acl - Check permission for double path operation.
+ * tomoyo_path_permission - Check permission for single path operation.
  *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @type:      Type of operation.
- * @filename1: First filename to check.
- * @filename2: Second filename to check.
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path2_acl(const struct tomoyo_domain_info *domain,
-			    const u8 type,
-			    const struct tomoyo_path_info *filename1,
-			    const struct tomoyo_path_info *filename2)
-{
-	struct tomoyo_acl_info *ptr;
-	const u8 perm = 1 << type;
-	int error = -EPERM;
-
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path2_acl *acl;
-		if (ptr->type != TOMOYO_TYPE_PATH2_ACL)
-			continue;
-		acl = container_of(ptr, struct tomoyo_path2_acl, head);
-		if (!(acl->perm & perm))
-			continue;
-		if (!tomoyo_compare_name_union(filename1, &acl->name1))
-			continue;
-		if (!tomoyo_compare_name_union(filename2, &acl->name2))
-			continue;
-		error = 0;
-		break;
-	}
-	return error;
-}
-
-/**
- * tomoyo_path_permission2 - Check permission for single path operation.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @r:         Pointer to "struct tomoyo_request_info".
  * @operation: Type of operation.
  * @filename:  Filename to check.
- * @mode:      Access control mode.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_path_permission2(struct tomoyo_domain_info *const domain,
-				   u8 operation,
-				   const struct tomoyo_path_info *filename,
-				   const u8 mode)
+int tomoyo_path_permission(struct tomoyo_request_info *r, u8 operation,
+			   const struct tomoyo_path_info *filename)
 {
-	const char *msg;
 	int error;
-	const bool is_enforce = (mode == 3);
 
-	if (!mode)
-		return 0;
  next:
-	error = tomoyo_path_acl(domain, operation, filename);
-	msg = tomoyo_path2keyword(operation);
-	if (!error)
-		goto ok;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s %s' denied for %s\n",
-		       tomoyo_get_msg(is_enforce), msg, filename->name,
-		       tomoyo_get_last_name(domain));
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		const char *name = tomoyo_get_file_pattern(filename)->name;
-		tomoyo_update_path_acl(operation, name, domain, false);
-	}
-	if (!is_enforce)
-		error = 0;
- ok:
+	r->type = tomoyo_p2mac[operation];
+	r->mode = tomoyo_get_mode(r->profile, r->type);
+	if (r->mode == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	r->param_type = TOMOYO_TYPE_PATH_ACL;
+	r->param.path.filename = filename;
+	r->param.path.operation = operation;
+	do {
+		tomoyo_check_acl(r, tomoyo_check_path_acl);
+		if (!r->granted && operation == TOMOYO_TYPE_READ &&
+		    !r->domain->ignore_global_allow_read &&
+		    tomoyo_globally_readable_file(filename))
+			r->granted = true;
+		error = tomoyo_audit_path_log(r);
+		/*
+		 * Do not retry for execute request, for alias may have
+		 * changed.
+		 */
+	} while (error == TOMOYO_RETRY_REQUEST &&
+		 operation != TOMOYO_TYPE_EXECUTE);
 	/*
 	 * Since "allow_truncate" doesn't imply "allow_rewrite" permission,
 	 * we need to check "allow_rewrite" permission if the filename is
 	 * specified by "deny_rewrite" keyword.
 	 */
 	if (!error && operation == TOMOYO_TYPE_TRUNCATE &&
-	    tomoyo_is_no_rewrite_file(filename)) {
+	    tomoyo_no_rewrite_file(filename)) {
 		operation = TOMOYO_TYPE_REWRITE;
 		goto next;
 	}
 	return error;
 }
 
+static bool tomoyo_same_path_number_acl(const struct tomoyo_acl_info *a,
+					const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_path_number_acl *p1 = container_of(a, typeof(*p1),
+							       head);
+	const struct tomoyo_path_number_acl *p2 = container_of(b, typeof(*p2),
+							       head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name, &p2->name)
+		&& tomoyo_same_number_union(&p1->number, &p2->number);
+}
+
+static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
+					 struct tomoyo_acl_info *b,
+					 const bool is_delete)
+{
+	u8 * const a_perm = &container_of(a, struct tomoyo_path_number_acl,
+					  head)->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_path_number_acl, head)
+		->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
+}
+
 /**
- * tomoyo_check_exec_perm - Check permission for "execute".
+ * tomoyo_update_path_number_acl - Update ioctl/chmod/chown/chgrp ACL.
+ *
+ * @type:      Type of operation.
+ * @filename:  Filename.
+ * @number:    Number.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
  *
- * @domain:   Pointer to "struct tomoyo_domain_info".
- * @filename: Check permission for "execute".
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_update_path_number_acl(const u8 type, const char *filename,
+					 char *number,
+					 struct tomoyo_domain_info * const
+					 domain,
+					 const bool is_delete)
+{
+	struct tomoyo_path_number_acl e = {
+		.head.type = TOMOYO_TYPE_PATH_NUMBER_ACL,
+		.perm = 1 << type
+	};
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	if (!tomoyo_parse_name_union(filename, &e.name))
+		return -EINVAL;
+	if (!tomoyo_parse_number_union(number, &e.number))
+		goto out;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path_number_acl,
+				     tomoyo_merge_path_number_acl);
+ out:
+	tomoyo_put_name_union(&e.name);
+	tomoyo_put_number_union(&e.number);
+	return error;
+}
+
+/**
+ * tomoyo_path_number_perm - Check permission for "create", "mkdir", "mkfifo", "mksock", "ioctl", "chmod", "chown", "chgrp".
  *
- * Returns 0 on success, negativevalue otherwise.
+ * @type:   Type of operation.
+ * @path:   Pointer to "struct path".
+ * @number: Number.
  *
- * Caller holds tomoyo_read_lock().
+ * Returns 0 on success, negative value otherwise.
  */
-int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
-			   const struct tomoyo_path_info *filename)
+int tomoyo_path_number_perm(const u8 type, struct path *path,
+			    unsigned long number)
 {
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
+	struct tomoyo_request_info r;
+	int error = -ENOMEM;
+	struct tomoyo_path_info buf;
+	int idx;
 
-	if (!mode)
+	if (tomoyo_init_request_info(&r, NULL, tomoyo_pn2mac[type])
+	    == TOMOYO_CONFIG_DISABLED || !path->mnt || !path->dentry)
 		return 0;
-	return tomoyo_check_file_perm2(domain, filename, 1, "do_execve", mode);
+	idx = tomoyo_read_lock();
+	if (!tomoyo_get_realpath(&buf, path))
+		goto out;
+	if (type == TOMOYO_TYPE_MKDIR)
+		tomoyo_add_slash(&buf);
+	r.param_type = TOMOYO_TYPE_PATH_NUMBER_ACL;
+	r.param.path_number.operation = type;
+	r.param.path_number.filename = &buf;
+	r.param.path_number.number = number;
+	do {
+		tomoyo_check_acl(&r, tomoyo_check_path_number_acl);
+		error = tomoyo_audit_path_number_log(&r);
+	} while (error == TOMOYO_RETRY_REQUEST);
+	kfree(buf.name);
+ out:
+	tomoyo_read_unlock(idx);
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
+		error = 0;
+	return error;
 }
 
 /**
@@ -1096,24 +928,17 @@ int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 {
 	const u8 acc_mode = ACC_MODE(flag);
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf;
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	struct tomoyo_path_info buf;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path->mnt)
-		return 0;
-	if (acc_mode == 0)
-		return 0;
-	if (path->dentry->d_inode && S_ISDIR(path->dentry->d_inode->i_mode))
-		/*
-		 * I don't check directories here because mkdir() and rmdir()
-		 * don't call me.
-		 */
+	if (!path->mnt ||
+	    (path->dentry->d_inode && S_ISDIR(path->dentry->d_inode->i_mode)))
 		return 0;
+	buf.name = NULL;
+	r.mode = TOMOYO_CONFIG_DISABLED;
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(path);
-	if (!buf)
+	if (!tomoyo_get_realpath(&buf, path))
 		goto out;
 	error = 0;
 	/*
@@ -1121,28 +946,43 @@ int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 	 * we need to check "allow_rewrite" permission when the filename is not
 	 * opened for append mode or the filename is truncated at open time.
 	 */
-	if ((acc_mode & MAY_WRITE) &&
-	    ((flag & O_TRUNC) || !(flag & O_APPEND)) &&
-	    (tomoyo_is_no_rewrite_file(buf))) {
-		error = tomoyo_path_permission2(domain, TOMOYO_TYPE_REWRITE,
-						buf, mode);
+	if ((acc_mode & MAY_WRITE) && !(flag & O_APPEND)
+	    && tomoyo_init_request_info(&r, domain, TOMOYO_MAC_FILE_REWRITE)
+	    != TOMOYO_CONFIG_DISABLED) {
+		if (!tomoyo_get_realpath(&buf, path)) {
+			error = -ENOMEM;
+			goto out;
+		}
+		if (tomoyo_no_rewrite_file(&buf))
+			error = tomoyo_path_permission(&r, TOMOYO_TYPE_REWRITE,
+						       &buf);
+	}
+	if (!error && acc_mode &&
+	    tomoyo_init_request_info(&r, domain, TOMOYO_MAC_FILE_OPEN)
+	    != TOMOYO_CONFIG_DISABLED) {
+		u8 operation;
+		if (!buf.name && !tomoyo_get_realpath(&buf, path)) {
+			error = -ENOMEM;
+			goto out;
+		}
+		if (acc_mode == (MAY_READ | MAY_WRITE))
+			operation = TOMOYO_TYPE_READ_WRITE;
+		else if (acc_mode == MAY_READ)
+			operation = TOMOYO_TYPE_READ;
+		else
+			operation = TOMOYO_TYPE_WRITE;
+		error = tomoyo_path_permission(&r, operation, &buf);
 	}
-	if (!error)
-		error = tomoyo_check_file_perm2(domain, buf, acc_mode, "open",
-						mode);
-	if (!error && (flag & O_TRUNC))
-		error = tomoyo_path_permission2(domain, TOMOYO_TYPE_TRUNCATE,
-						buf, mode);
  out:
-	kfree(buf);
+	kfree(buf.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
 
 /**
- * tomoyo_path_perm - Check permission for "create", "unlink", "mkdir", "rmdir", "mkfifo", "mksock", "mkblock", "mkchar", "truncate", "symlink", "ioctl", "chmod", "chown", "chgrp", "chroot", "mount" and "unmount".
+ * tomoyo_path_perm - Check permission for "unlink", "rmdir", "truncate", "symlink", "rewrite", "chroot" and "unmount".
  *
  * @operation: Type of operation.
  * @path:      Pointer to "struct path".
@@ -1152,71 +992,79 @@ int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 int tomoyo_path_perm(const u8 operation, struct path *path)
 {
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	struct tomoyo_path_info buf;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path->mnt)
+	if (!path->mnt)
 		return 0;
+	if (tomoyo_init_request_info(&r, NULL, tomoyo_p2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	buf.name = NULL;
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(path);
-	if (!buf)
+	if (!tomoyo_get_realpath(&buf, path))
 		goto out;
 	switch (operation) {
-	case TOMOYO_TYPE_MKDIR:
+	case TOMOYO_TYPE_REWRITE:
+		if (!tomoyo_no_rewrite_file(&buf)) {
+			error = 0;
+			goto out;
+		}
+		break;
 	case TOMOYO_TYPE_RMDIR:
 	case TOMOYO_TYPE_CHROOT:
-		if (!buf->is_dir) {
-			/*
-			 * tomoyo_get_path() reserves space for appending "/."
-			 */
-			strcat((char *) buf->name, "/");
-			tomoyo_fill_path_info(buf);
-		}
+	case TOMOYO_TYPE_UMOUNT:
+		tomoyo_add_slash(&buf);
+		break;
 	}
-	error = tomoyo_path_permission2(domain, operation, buf, mode);
+	error = tomoyo_path_permission(&r, operation, &buf);
  out:
-	kfree(buf);
+	kfree(buf.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
 
 /**
- * tomoyo_check_rewrite_permission - Check permission for "rewrite".
+ * tomoyo_mkdev_perm - Check permission for "mkblock" and "mkchar".
  *
- * @filp: Pointer to "struct file".
+ * @operation: Type of operation. (TOMOYO_TYPE_MKCHAR or TOMOYO_TYPE_MKBLOCK)
+ * @path:      Pointer to "struct path".
+ * @mode:      Create mode.
+ * @dev:       Device number.
  *
  * Returns 0 on success, negative value otherwise.
  */
-int tomoyo_check_rewrite_permission(struct file *filp)
+int tomoyo_mkdev_perm(const u8 operation, struct path *path,
+			     const unsigned int mode, unsigned int dev)
 {
+	struct tomoyo_request_info r;
 	int error = -ENOMEM;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
-	struct tomoyo_path_info *buf;
+	struct tomoyo_path_info buf;
 	int idx;
 
-	if (!mode || !filp->f_path.mnt)
+	if (!path->mnt ||
+	    tomoyo_init_request_info(&r, NULL, tomoyo_pnnn2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
 		return 0;
-
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(&filp->f_path);
-	if (!buf)
-		goto out;
-	if (!tomoyo_is_no_rewrite_file(buf)) {
-		error = 0;
-		goto out;
+	error = -ENOMEM;
+	if (tomoyo_get_realpath(&buf, path)) {
+		dev = new_decode_dev(dev);
+		r.param_type = TOMOYO_TYPE_MKDEV_ACL;
+		r.param.mkdev.filename = &buf;
+		r.param.mkdev.operation = operation;
+		r.param.mkdev.mode = mode;
+		r.param.mkdev.major = MAJOR(dev);
+		r.param.mkdev.minor = MINOR(dev);
+		tomoyo_check_acl(&r, tomoyo_check_mkdev_acl);
+		error = tomoyo_audit_mkdev_log(&r);
+		kfree(buf.name);
 	}
-	error = tomoyo_path_permission2(domain, TOMOYO_TYPE_REWRITE, buf, mode);
- out:
-	kfree(buf);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
@@ -1234,56 +1082,99 @@ int tomoyo_path2_perm(const u8 operation, struct path *path1,
 		      struct path *path2)
 {
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf1, *buf2;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
-	const char *msg;
+	struct tomoyo_path_info buf1;
+	struct tomoyo_path_info buf2;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path1->mnt || !path2->mnt)
+	if (!path1->mnt || !path2->mnt ||
+	    tomoyo_init_request_info(&r, NULL, tomoyo_pp2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
 		return 0;
+	buf1.name = NULL;
+	buf2.name = NULL;
 	idx = tomoyo_read_lock();
-	buf1 = tomoyo_get_path(path1);
-	buf2 = tomoyo_get_path(path2);
-	if (!buf1 || !buf2)
-		goto out;
-	{
-		struct dentry *dentry = path1->dentry;
-		if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) {
-			/*
-			 * tomoyo_get_path() reserves space for appending "/."
-			 */
-			if (!buf1->is_dir) {
-				strcat((char *) buf1->name, "/");
-				tomoyo_fill_path_info(buf1);
-			}
-			if (!buf2->is_dir) {
-				strcat((char *) buf2->name, "/");
-				tomoyo_fill_path_info(buf2);
-			}
-		}
-	}
-	error = tomoyo_path2_acl(domain, operation, buf1, buf2);
-	msg = tomoyo_path22keyword(operation);
-	if (!error)
+	if (!tomoyo_get_realpath(&buf1, path1) ||
+	    !tomoyo_get_realpath(&buf2, path2))
 		goto out;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s %s %s' "
-		       "denied for %s\n", tomoyo_get_msg(is_enforce),
-		       msg, buf1->name, buf2->name,
-		       tomoyo_get_last_name(domain));
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		const char *name1 = tomoyo_get_file_pattern(buf1)->name;
-		const char *name2 = tomoyo_get_file_pattern(buf2)->name;
-		tomoyo_update_path2_acl(operation, name1, name2, domain,
-					false);
-	}
+	switch (operation) {
+		struct dentry *dentry;
+	case TOMOYO_TYPE_RENAME:
+        case TOMOYO_TYPE_LINK:
+		dentry = path1->dentry;
+	        if (!dentry->d_inode || !S_ISDIR(dentry->d_inode->i_mode))
+                        break;
+                /* fall through */
+        case TOMOYO_TYPE_PIVOT_ROOT:
+                tomoyo_add_slash(&buf1);
+                tomoyo_add_slash(&buf2);
+		break;
+        }
+	r.param_type = TOMOYO_TYPE_PATH2_ACL;
+	r.param.path2.operation = operation;
+	r.param.path2.filename1 = &buf1;
+	r.param.path2.filename2 = &buf2;
+	do {
+		tomoyo_check_acl(&r, tomoyo_check_path2_acl);
+		error = tomoyo_audit_path2_log(&r);
+	} while (error == TOMOYO_RETRY_REQUEST);
  out:
-	kfree(buf1);
-	kfree(buf2);
+	kfree(buf1.name);
+	kfree(buf2.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
+
+/**
+ * tomoyo_write_file - Update file related list.
+ *
+ * @data:      String to parse.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+int tomoyo_write_file(char *data, struct tomoyo_domain_info *domain,
+		      const bool is_delete)
+{
+	char *w[5];
+	u8 type;
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
+		return -EINVAL;
+	if (strncmp(w[0], "allow_", 6))
+		goto out;
+	w[0] += 6;
+	for (type = 0; type < TOMOYO_MAX_PATH_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path_keyword[type]))
+			continue;
+		return tomoyo_update_path_acl(type, w[1], domain, is_delete);
+	}
+	if (!w[2][0])
+		goto out;
+	for (type = 0; type < TOMOYO_MAX_PATH2_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path2_keyword[type]))
+			continue;
+		return tomoyo_update_path2_acl(type, w[1], w[2], domain,
+					       is_delete);
+	}
+	for (type = 0; type < TOMOYO_MAX_PATH_NUMBER_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path_number_keyword[type]))
+			continue;
+		return tomoyo_update_path_number_acl(type, w[1], w[2], domain,
+						     is_delete);
+	}
+	if (!w[3][0] || !w[4][0])
+		goto out;
+	for (type = 0; type < TOMOYO_MAX_MKDEV_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_mkdev_keyword[type]))
+			continue;
+		return tomoyo_update_mkdev_acl(type, w[1], w[2], w[3],
+					       w[4], domain, is_delete);
+	}
+ out:
+	return -EINVAL;
+}
diff --git a/security/tomoyo/gc.c b/security/tomoyo/gc.c
index b9cc71b0431..a877e4c3b10 100644
--- a/security/tomoyo/gc.c
+++ b/security/tomoyo/gc.c
@@ -11,83 +11,75 @@
 #include <linux/kthread.h>
 #include <linux/slab.h>
 
-enum tomoyo_gc_id {
-	TOMOYO_ID_PATH_GROUP,
-	TOMOYO_ID_PATH_GROUP_MEMBER,
-	TOMOYO_ID_DOMAIN_INITIALIZER,
-	TOMOYO_ID_DOMAIN_KEEPER,
-	TOMOYO_ID_ALIAS,
-	TOMOYO_ID_GLOBALLY_READABLE,
-	TOMOYO_ID_PATTERN,
-	TOMOYO_ID_NO_REWRITE,
-	TOMOYO_ID_MANAGER,
-	TOMOYO_ID_NAME,
-	TOMOYO_ID_ACL,
-	TOMOYO_ID_DOMAIN
-};
-
-struct tomoyo_gc_entry {
+struct tomoyo_gc {
 	struct list_head list;
 	int type;
-	void *element;
+	struct list_head *element;
 };
 static LIST_HEAD(tomoyo_gc_queue);
 static DEFINE_MUTEX(tomoyo_gc_mutex);
 
 /* Caller holds tomoyo_policy_lock mutex. */
-static bool tomoyo_add_to_gc(const int type, void *element)
+static bool tomoyo_add_to_gc(const int type, struct list_head *element)
 {
-	struct tomoyo_gc_entry *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
+	struct tomoyo_gc *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
 	if (!entry)
 		return false;
 	entry->type = type;
 	entry->element = element;
 	list_add(&entry->list, &tomoyo_gc_queue);
+	list_del_rcu(element);
 	return true;
 }
 
-static void tomoyo_del_allow_read
-(struct tomoyo_globally_readable_file_entry *ptr)
+static void tomoyo_del_allow_read(struct list_head *element)
 {
+	struct tomoyo_readable_file *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->filename);
 }
 
-static void tomoyo_del_file_pattern(struct tomoyo_pattern_entry *ptr)
+static void tomoyo_del_file_pattern(struct list_head *element)
 {
+	struct tomoyo_no_pattern *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->pattern);
 }
 
-static void tomoyo_del_no_rewrite(struct tomoyo_no_rewrite_entry *ptr)
+static void tomoyo_del_no_rewrite(struct list_head *element)
 {
+	struct tomoyo_no_rewrite *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->pattern);
 }
 
-static void tomoyo_del_domain_initializer
-(struct tomoyo_domain_initializer_entry *ptr)
+static void tomoyo_del_transition_control(struct list_head *element)
 {
+	struct tomoyo_transition_control *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->domainname);
 	tomoyo_put_name(ptr->program);
 }
 
-static void tomoyo_del_domain_keeper(struct tomoyo_domain_keeper_entry *ptr)
-{
-	tomoyo_put_name(ptr->domainname);
-	tomoyo_put_name(ptr->program);
-}
-
-static void tomoyo_del_alias(struct tomoyo_alias_entry *ptr)
+static void tomoyo_del_aggregator(struct list_head *element)
 {
+	struct tomoyo_aggregator *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->original_name);
-	tomoyo_put_name(ptr->aliased_name);
+	tomoyo_put_name(ptr->aggregated_name);
 }
 
-static void tomoyo_del_manager(struct tomoyo_policy_manager_entry *ptr)
+static void tomoyo_del_manager(struct list_head *element)
 {
+	struct tomoyo_manager *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->manager);
 }
 
-static void tomoyo_del_acl(struct tomoyo_acl_info *acl)
+static void tomoyo_del_acl(struct list_head *element)
 {
+	struct tomoyo_acl_info *acl =
+		container_of(element, typeof(*acl), list);
 	switch (acl->type) {
 	case TOMOYO_TYPE_PATH_ACL:
 		{
@@ -104,14 +96,41 @@ static void tomoyo_del_acl(struct tomoyo_acl_info *acl)
 			tomoyo_put_name_union(&entry->name2);
 		}
 		break;
-	default:
-		printk(KERN_WARNING "Unknown type\n");
+	case TOMOYO_TYPE_PATH_NUMBER_ACL:
+		{
+			struct tomoyo_path_number_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->name);
+			tomoyo_put_number_union(&entry->number);
+		}
+		break;
+	case TOMOYO_TYPE_MKDEV_ACL:
+		{
+			struct tomoyo_mkdev_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->name);
+			tomoyo_put_number_union(&entry->mode);
+			tomoyo_put_number_union(&entry->major);
+			tomoyo_put_number_union(&entry->minor);
+		}
+		break;
+	case TOMOYO_TYPE_MOUNT_ACL:
+		{
+			struct tomoyo_mount_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->dev_name);
+			tomoyo_put_name_union(&entry->dir_name);
+			tomoyo_put_name_union(&entry->fs_type);
+			tomoyo_put_number_union(&entry->flags);
+		}
 		break;
 	}
 }
 
-static bool tomoyo_del_domain(struct tomoyo_domain_info *domain)
+static bool tomoyo_del_domain(struct list_head *element)
 {
+	struct tomoyo_domain_info *domain =
+		container_of(element, typeof(*domain), list);
 	struct tomoyo_acl_info *acl;
 	struct tomoyo_acl_info *tmp;
 	/*
@@ -139,7 +158,7 @@ static bool tomoyo_del_domain(struct tomoyo_domain_info *domain)
 	if (atomic_read(&domain->users))
 		return false;
 	list_for_each_entry_safe(acl, tmp, &domain->acl_info_list, list) {
-		tomoyo_del_acl(acl);
+		tomoyo_del_acl(&acl->list);
 		tomoyo_memory_free(acl);
 	}
 	tomoyo_put_name(domain->domainname);
@@ -147,135 +166,70 @@ static bool tomoyo_del_domain(struct tomoyo_domain_info *domain)
 }
 
 
-static void tomoyo_del_name(const struct tomoyo_name_entry *ptr)
+static void tomoyo_del_name(struct list_head *element)
 {
+	const struct tomoyo_name *ptr =
+		container_of(element, typeof(*ptr), list);
 }
 
-static void tomoyo_del_path_group_member(struct tomoyo_path_group_member
-					 *member)
+static void tomoyo_del_path_group(struct list_head *element)
 {
+	struct tomoyo_path_group *member =
+		container_of(element, typeof(*member), head.list);
 	tomoyo_put_name(member->member_name);
 }
 
-static void tomoyo_del_path_group(struct tomoyo_path_group *group)
+static void tomoyo_del_group(struct list_head *element)
 {
+	struct tomoyo_group *group =
+		container_of(element, typeof(*group), list);
 	tomoyo_put_name(group->group_name);
 }
 
+static void tomoyo_del_number_group(struct list_head *element)
+{
+	struct tomoyo_number_group *member =
+		container_of(element, typeof(*member), head.list);
+}
+
+static bool tomoyo_collect_member(struct list_head *member_list, int id)
+{
+	struct tomoyo_acl_head *member;
+	list_for_each_entry(member, member_list, list) {
+		if (!member->is_deleted)
+			continue;
+		if (!tomoyo_add_to_gc(id, &member->list))
+			return false;
+	}
+        return true;
+}
+
+static bool tomoyo_collect_acl(struct tomoyo_domain_info *domain)
+{
+	struct tomoyo_acl_info *acl;
+	list_for_each_entry(acl, &domain->acl_info_list, list) {
+		if (!acl->is_deleted)
+			continue;
+		if (!tomoyo_add_to_gc(TOMOYO_ID_ACL, &acl->list))
+			return false;
+	}
+	return true;
+}
+
 static void tomoyo_collect_entry(void)
 {
+	int i;
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		return;
-	{
-		struct tomoyo_globally_readable_file_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_GLOBALLY_READABLE, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_pattern_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_PATTERN, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_no_rewrite_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_NO_REWRITE, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_domain_initializer_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN_INITIALIZER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_domain_keeper_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN_KEEPER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_alias_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_ALIAS, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_policy_manager_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_MANAGER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
+	for (i = 0; i < TOMOYO_MAX_POLICY; i++) {
+		if (!tomoyo_collect_member(&tomoyo_policy_list[i], i))
+			goto unlock;
 	}
 	{
 		struct tomoyo_domain_info *domain;
 		list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-			struct tomoyo_acl_info *acl;
-			list_for_each_entry_rcu(acl, &domain->acl_info_list,
-						list) {
-				switch (acl->type) {
-				case TOMOYO_TYPE_PATH_ACL:
-					if (container_of(acl,
-					 struct tomoyo_path_acl,
-							 head)->perm ||
-					    container_of(acl,
-					 struct tomoyo_path_acl,
-							 head)->perm_high)
-						continue;
-					break;
-				case TOMOYO_TYPE_PATH2_ACL:
-					if (container_of(acl,
-					 struct tomoyo_path2_acl,
-							 head)->perm)
-						continue;
-					break;
-				default:
-					continue;
-				}
-				if (tomoyo_add_to_gc(TOMOYO_ID_ACL, acl))
-					list_del_rcu(&acl->list);
-				else
-					break;
-			}
+			if (!tomoyo_collect_acl(domain))
+				goto unlock;
 			if (!domain->is_deleted || atomic_read(&domain->users))
 				continue;
 			/*
@@ -283,104 +237,92 @@ static void tomoyo_collect_entry(void)
 			 * refer this domain after successful execve().
 			 * We recheck domain->users after SRCU synchronization.
 			 */
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN, domain))
-				list_del_rcu(&domain->list);
-			else
-				break;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_DOMAIN, &domain->list))
+				goto unlock;
 		}
 	}
-	{
-		int i;
-		for (i = 0; i < TOMOYO_MAX_HASH; i++) {
-			struct tomoyo_name_entry *ptr;
-			list_for_each_entry_rcu(ptr, &tomoyo_name_list[i],
-						list) {
-				if (atomic_read(&ptr->users))
-					continue;
-				if (tomoyo_add_to_gc(TOMOYO_ID_NAME, ptr))
-					list_del_rcu(&ptr->list);
-				else {
-					i = TOMOYO_MAX_HASH;
-					break;
-				}
-			}
+	for (i = 0; i < TOMOYO_MAX_HASH; i++) {
+		struct tomoyo_name *ptr;
+		list_for_each_entry_rcu(ptr, &tomoyo_name_list[i], list) {
+			if (atomic_read(&ptr->users))
+				continue;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_NAME, &ptr->list))
+				goto unlock;
 		}
 	}
-	{
-		struct tomoyo_path_group *group;
-		list_for_each_entry_rcu(group, &tomoyo_path_group_list, list) {
-			struct tomoyo_path_group_member *member;
-			list_for_each_entry_rcu(member, &group->member_list,
-						list) {
-				if (!member->is_deleted)
-					continue;
-				if (tomoyo_add_to_gc(TOMOYO_ID_PATH_GROUP_MEMBER,
-						     member))
-					list_del_rcu(&member->list);
-				else
-					break;
-			}
+	for (i = 0; i < TOMOYO_MAX_GROUP; i++) {
+		struct list_head *list = &tomoyo_group_list[i];
+		int id;
+		struct tomoyo_group *group;
+		switch (i) {
+		case 0:
+			id = TOMOYO_ID_PATH_GROUP;
+			break;
+		default:
+			id = TOMOYO_ID_NUMBER_GROUP;
+			break;
+		}
+		list_for_each_entry(group, list, list) {
+			if (!tomoyo_collect_member(&group->member_list, id))
+				goto unlock;
 			if (!list_empty(&group->member_list) ||
 			    atomic_read(&group->users))
 				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_PATH_GROUP, group))
-				list_del_rcu(&group->list);
-			else
-				break;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_GROUP, &group->list))
+				goto unlock;
 		}
 	}
+ unlock:
 	mutex_unlock(&tomoyo_policy_lock);
 }
 
 static void tomoyo_kfree_entry(void)
 {
-	struct tomoyo_gc_entry *p;
-	struct tomoyo_gc_entry *tmp;
+	struct tomoyo_gc *p;
+	struct tomoyo_gc *tmp;
 
 	list_for_each_entry_safe(p, tmp, &tomoyo_gc_queue, list) {
+		struct list_head *element = p->element;
 		switch (p->type) {
-		case TOMOYO_ID_DOMAIN_INITIALIZER:
-			tomoyo_del_domain_initializer(p->element);
-			break;
-		case TOMOYO_ID_DOMAIN_KEEPER:
-			tomoyo_del_domain_keeper(p->element);
+		case TOMOYO_ID_TRANSITION_CONTROL:
+			tomoyo_del_transition_control(element);
 			break;
-		case TOMOYO_ID_ALIAS:
-			tomoyo_del_alias(p->element);
+		case TOMOYO_ID_AGGREGATOR:
+			tomoyo_del_aggregator(element);
 			break;
 		case TOMOYO_ID_GLOBALLY_READABLE:
-			tomoyo_del_allow_read(p->element);
+			tomoyo_del_allow_read(element);
 			break;
 		case TOMOYO_ID_PATTERN:
-			tomoyo_del_file_pattern(p->element);
+			tomoyo_del_file_pattern(element);
 			break;
 		case TOMOYO_ID_NO_REWRITE:
-			tomoyo_del_no_rewrite(p->element);
+			tomoyo_del_no_rewrite(element);
 			break;
 		case TOMOYO_ID_MANAGER:
-			tomoyo_del_manager(p->element);
+			tomoyo_del_manager(element);
 			break;
 		case TOMOYO_ID_NAME:
-			tomoyo_del_name(p->element);
+			tomoyo_del_name(element);
 			break;
 		case TOMOYO_ID_ACL:
-			tomoyo_del_acl(p->element);
+			tomoyo_del_acl(element);
 			break;
 		case TOMOYO_ID_DOMAIN:
-			if (!tomoyo_del_domain(p->element))
+			if (!tomoyo_del_domain(element))
 				continue;
 			break;
-		case TOMOYO_ID_PATH_GROUP_MEMBER:
-			tomoyo_del_path_group_member(p->element);
-			break;
 		case TOMOYO_ID_PATH_GROUP:
-			tomoyo_del_path_group(p->element);
+			tomoyo_del_path_group(element);
 			break;
-		default:
-			printk(KERN_WARNING "Unknown type\n");
+		case TOMOYO_ID_GROUP:
+			tomoyo_del_group(element);
+			break;
+		case TOMOYO_ID_NUMBER_GROUP:
+			tomoyo_del_number_group(element);
 			break;
 		}
-		tomoyo_memory_free(p->element);
+		tomoyo_memory_free(element);
 		list_del(&p->list);
 		kfree(p);
 	}
diff --git a/security/tomoyo/group.c b/security/tomoyo/group.c
new file mode 100644
index 00000000000..e94352ce723
--- /dev/null
+++ b/security/tomoyo/group.c
@@ -0,0 +1,130 @@
+/*
+ * security/tomoyo/group.c
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+static bool tomoyo_same_path_group(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_path_group, head)->member_name ==
+		container_of(b, struct tomoyo_path_group, head)->member_name;
+}
+
+static bool tomoyo_same_number_group(const struct tomoyo_acl_head *a,
+				  const struct tomoyo_acl_head *b)
+{
+	return !memcmp(&container_of(a, struct tomoyo_number_group, head)
+		       ->number,
+		       &container_of(b, struct tomoyo_number_group, head)
+		       ->number,
+		       sizeof(container_of(a, struct tomoyo_number_group, head)
+			      ->number));
+}
+
+/**
+ * tomoyo_write_group - Write "struct tomoyo_path_group"/"struct tomoyo_number_group" list.
+ *
+ * @data:      String to parse.
+ * @is_delete: True if it is a delete request.
+ * @type:      Type of this group.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+int tomoyo_write_group(char *data, const bool is_delete, const u8 type)
+{
+	struct tomoyo_group *group;
+	struct list_head *member;
+	char *w[2];
+	int error = -EINVAL;
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
+		return -EINVAL;
+	group = tomoyo_get_group(w[0], type);
+	if (!group)
+		return -ENOMEM;
+	member = &group->member_list;
+	if (type == TOMOYO_PATH_GROUP) {
+		struct tomoyo_path_group e = { };
+		e.member_name = tomoyo_get_name(w[1]);
+		if (!e.member_name) {
+			error = -ENOMEM;
+			goto out;
+		}
+		error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+					     member, tomoyo_same_path_group);
+		tomoyo_put_name(e.member_name);
+	} else if (type == TOMOYO_NUMBER_GROUP) {
+		struct tomoyo_number_group e = { };
+		if (w[1][0] == '@'
+		    || !tomoyo_parse_number_union(w[1], &e.number)
+		    || e.number.values[0] > e.number.values[1])
+			goto out;
+		error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+					     member, tomoyo_same_number_group);
+		/*
+		 * tomoyo_put_number_union() is not needed because
+		 * w[1][0] != '@'.
+		 */
+	}
+ out:
+	tomoyo_put_group(group);
+	return error;
+}
+
+/**
+ * tomoyo_path_matches_group - Check whether the given pathname matches members of the given pathname group.
+ *
+ * @pathname:        The name of pathname.
+ * @group:           Pointer to "struct tomoyo_path_group".
+ *
+ * Returns matched member's pathname if @pathname matches pathnames in @group,
+ * NULL otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+const struct tomoyo_path_info *
+tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
+			  const struct tomoyo_group *group)
+{
+	struct tomoyo_path_group *member;
+	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+		if (member->head.is_deleted)
+			continue;
+		if (!tomoyo_path_matches_pattern(pathname, member->member_name))
+			continue;
+		return member->member_name;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_number_matches_group - Check whether the given number matches members of the given number group.
+ *
+ * @min:   Min number.
+ * @max:   Max number.
+ * @group: Pointer to "struct tomoyo_number_group".
+ *
+ * Returns true if @min and @max partially overlaps @group, false otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+bool tomoyo_number_matches_group(const unsigned long min,
+				 const unsigned long max,
+				 const struct tomoyo_group *group)
+{
+	struct tomoyo_number_group *member;
+	bool matched = false;
+	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+		if (member->head.is_deleted)
+			continue;
+		if (min > member->number.values[1] ||
+		    max < member->number.values[0])
+			continue;
+		matched = true;
+		break;
+	}
+	return matched;
+}
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
new file mode 100644
index 00000000000..bbada7ca1b9
--- /dev/null
+++ b/security/tomoyo/load_policy.c
@@ -0,0 +1,81 @@
+/*
+ * security/tomoyo/load_policy.c
+ *
+ * Policy loader launcher for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include "common.h"
+
+/* path to policy loader */
+static const char *tomoyo_loader = "/sbin/tomoyo-init";
+
+/**
+ * tomoyo_policy_loader_exists - Check whether /sbin/tomoyo-init exists.
+ *
+ * Returns true if /sbin/tomoyo-init exists, false otherwise.
+ */
+static bool tomoyo_policy_loader_exists(void)
+{
+	/*
+	 * Don't activate MAC if the policy loader doesn't exist.
+	 * If the initrd includes /sbin/init but real-root-dev has not
+	 * mounted on / yet, activating MAC will block the system since
+	 * policies are not loaded yet.
+	 * Thus, let do_execve() call this function everytime.
+	 */
+	struct path path;
+
+	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
+		printk(KERN_INFO "Not activating Mandatory Access Control now "
+		       "since %s doesn't exist.\n", tomoyo_loader);
+		return false;
+	}
+	path_put(&path);
+	return true;
+}
+
+/**
+ * tomoyo_load_policy - Run external policy loader to load policy.
+ *
+ * @filename: The program about to start.
+ *
+ * This function checks whether @filename is /sbin/init , and if so
+ * invoke /sbin/tomoyo-init and wait for the termination of /sbin/tomoyo-init
+ * and then continues invocation of /sbin/init.
+ * /sbin/tomoyo-init reads policy files in /etc/tomoyo/ directory and
+ * writes to /sys/kernel/security/tomoyo/ interfaces.
+ *
+ * Returns nothing.
+ */
+void tomoyo_load_policy(const char *filename)
+{
+	char *argv[2];
+	char *envp[3];
+
+	if (tomoyo_policy_loaded)
+		return;
+	/*
+	 * Check filename is /sbin/init or /sbin/tomoyo-start.
+	 * /sbin/tomoyo-start is a dummy filename in case where /sbin/init can't
+	 * be passed.
+	 * You can create /sbin/tomoyo-start by
+	 * "ln -s /bin/true /sbin/tomoyo-start".
+	 */
+	if (strcmp(filename, "/sbin/init") &&
+	    strcmp(filename, "/sbin/tomoyo-start"))
+		return;
+	if (!tomoyo_policy_loader_exists())
+		return;
+
+	printk(KERN_INFO "Calling %s to load policy. Please wait.\n",
+	       tomoyo_loader);
+	argv[0] = (char *) tomoyo_loader;
+	argv[1] = NULL;
+	envp[0] = "HOME=/";
+	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+	envp[2] = NULL;
+	call_usermodehelper(argv[0], argv, envp, 1);
+	tomoyo_check_profile();
+}
diff --git a/security/tomoyo/memory.c b/security/tomoyo/memory.c
new file mode 100644
index 00000000000..297612669c7
--- /dev/null
+++ b/security/tomoyo/memory.c
@@ -0,0 +1,282 @@
+/*
+ * security/tomoyo/memory.c
+ *
+ * Memory management functions for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/hash.h>
+#include <linux/slab.h>
+#include "common.h"
+
+/**
+ * tomoyo_warn_oom - Print out of memory warning message.
+ *
+ * @function: Function's name.
+ */
+void tomoyo_warn_oom(const char *function)
+{
+	/* Reduce error messages. */
+	static pid_t tomoyo_last_pid;
+	const pid_t pid = current->pid;
+	if (tomoyo_last_pid != pid) {
+		printk(KERN_WARNING "ERROR: Out of memory at %s.\n",
+		       function);
+		tomoyo_last_pid = pid;
+	}
+	if (!tomoyo_policy_loaded)
+		panic("MAC Initialization failed.\n");
+}
+
+/* Memory allocated for policy. */
+static atomic_t tomoyo_policy_memory_size;
+/* Quota for holding policy. */
+static unsigned int tomoyo_quota_for_policy;
+
+/**
+ * tomoyo_memory_ok - Check memory quota.
+ *
+ * @ptr: Pointer to allocated memory.
+ *
+ * Returns true on success, false otherwise.
+ *
+ * Returns true if @ptr is not NULL and quota not exceeded, false otherwise.
+ */
+bool tomoyo_memory_ok(void *ptr)
+{
+	size_t s = ptr ? ksize(ptr) : 0;
+	atomic_add(s, &tomoyo_policy_memory_size);
+	if (ptr && (!tomoyo_quota_for_policy ||
+		    atomic_read(&tomoyo_policy_memory_size)
+		    <= tomoyo_quota_for_policy)) {
+		memset(ptr, 0, s);
+		return true;
+	}
+	atomic_sub(s, &tomoyo_policy_memory_size);
+	tomoyo_warn_oom(__func__);
+	return false;
+}
+
+/**
+ * tomoyo_commit_ok - Check memory quota.
+ *
+ * @data:   Data to copy from.
+ * @size:   Size in byte.
+ *
+ * Returns pointer to allocated memory on success, NULL otherwise.
+ * @data is zero-cleared on success.
+ */
+void *tomoyo_commit_ok(void *data, const unsigned int size)
+{
+	void *ptr = kzalloc(size, GFP_NOFS);
+	if (tomoyo_memory_ok(ptr)) {
+		memmove(ptr, data, size);
+		memset(data, 0, size);
+		return ptr;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_memory_free - Free memory for elements.
+ *
+ * @ptr:  Pointer to allocated memory.
+ */
+void tomoyo_memory_free(void *ptr)
+{
+	atomic_sub(ksize(ptr), &tomoyo_policy_memory_size);
+	kfree(ptr);
+}
+
+/**
+ * tomoyo_get_group - Allocate memory for "struct tomoyo_path_group"/"struct tomoyo_number_group".
+ *
+ * @group_name: The name of address group.
+ * @idx:        Index number.
+ *
+ * Returns pointer to "struct tomoyo_group" on success, NULL otherwise.
+ */
+struct tomoyo_group *tomoyo_get_group(const char *group_name, const u8 idx)
+{
+	struct tomoyo_group e = { };
+	struct tomoyo_group *group = NULL;
+	bool found = false;
+	if (!tomoyo_correct_word(group_name) || idx >= TOMOYO_MAX_GROUP)
+		return NULL;
+	e.group_name = tomoyo_get_name(group_name);
+	if (!e.group_name)
+		return NULL;
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		goto out;
+	list_for_each_entry(group, &tomoyo_group_list[idx], list) {
+		if (e.group_name != group->group_name)
+			continue;
+		atomic_inc(&group->users);
+		found = true;
+		break;
+	}
+	if (!found) {
+		struct tomoyo_group *entry = tomoyo_commit_ok(&e, sizeof(e));
+		if (entry) {
+			INIT_LIST_HEAD(&entry->member_list);
+			atomic_set(&entry->users, 1);
+			list_add_tail_rcu(&entry->list,
+					  &tomoyo_group_list[idx]);
+			group = entry;
+			found = true;
+		}
+	}
+	mutex_unlock(&tomoyo_policy_lock);
+ out:
+	tomoyo_put_name(e.group_name);
+	return found ? group : NULL;
+}
+
+/*
+ * tomoyo_name_list is used for holding string data used by TOMOYO.
+ * Since same string data is likely used for multiple times (e.g.
+ * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of
+ * "const struct tomoyo_path_info *".
+ */
+struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
+
+/**
+ * tomoyo_get_name - Allocate permanent memory for string data.
+ *
+ * @name: The string to store into the permernent memory.
+ *
+ * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
+ */
+const struct tomoyo_path_info *tomoyo_get_name(const char *name)
+{
+	struct tomoyo_name *ptr;
+	unsigned int hash;
+	int len;
+	int allocated_len;
+	struct list_head *head;
+
+	if (!name)
+		return NULL;
+	len = strlen(name) + 1;
+	hash = full_name_hash((const unsigned char *) name, len - 1);
+	head = &tomoyo_name_list[hash_long(hash, TOMOYO_HASH_BITS)];
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		return NULL;
+	list_for_each_entry(ptr, head, list) {
+		if (hash != ptr->entry.hash || strcmp(name, ptr->entry.name))
+			continue;
+		atomic_inc(&ptr->users);
+		goto out;
+	}
+	ptr = kzalloc(sizeof(*ptr) + len, GFP_NOFS);
+	allocated_len = ptr ? ksize(ptr) : 0;
+	if (!ptr || (tomoyo_quota_for_policy &&
+		     atomic_read(&tomoyo_policy_memory_size) + allocated_len
+		     > tomoyo_quota_for_policy)) {
+		kfree(ptr);
+		ptr = NULL;
+		tomoyo_warn_oom(__func__);
+		goto out;
+	}
+	atomic_add(allocated_len, &tomoyo_policy_memory_size);
+	ptr->entry.name = ((char *) ptr) + sizeof(*ptr);
+	memmove((char *) ptr->entry.name, name, len);
+	atomic_set(&ptr->users, 1);
+	tomoyo_fill_path_info(&ptr->entry);
+	list_add_tail(&ptr->list, head);
+ out:
+	mutex_unlock(&tomoyo_policy_lock);
+	return ptr ? &ptr->entry : NULL;
+}
+
+/**
+ * tomoyo_mm_init - Initialize mm related code.
+ */
+void __init tomoyo_mm_init(void)
+{
+	int idx;
+
+	for (idx = 0; idx < TOMOYO_MAX_POLICY; idx++)
+		INIT_LIST_HEAD(&tomoyo_policy_list[idx]);
+	for (idx = 0; idx < TOMOYO_MAX_GROUP; idx++)
+		INIT_LIST_HEAD(&tomoyo_group_list[idx]);
+	for (idx = 0; idx < TOMOYO_MAX_HASH; idx++)
+		INIT_LIST_HEAD(&tomoyo_name_list[idx]);
+	INIT_LIST_HEAD(&tomoyo_kernel_domain.acl_info_list);
+	tomoyo_kernel_domain.domainname = tomoyo_get_name(TOMOYO_ROOT_NAME);
+	list_add_tail_rcu(&tomoyo_kernel_domain.list, &tomoyo_domain_list);
+	idx = tomoyo_read_lock();
+	if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain)
+		panic("Can't register tomoyo_kernel_domain");
+	{
+		/* Load built-in policy. */
+		tomoyo_write_transition_control("/sbin/hotplug", false,
+					TOMOYO_TRANSITION_CONTROL_INITIALIZE);
+		tomoyo_write_transition_control("/sbin/modprobe", false,
+					TOMOYO_TRANSITION_CONTROL_INITIALIZE);
+	}
+	tomoyo_read_unlock(idx);
+}
+
+
+/* Memory allocated for query lists. */
+unsigned int tomoyo_query_memory_size;
+/* Quota for holding query lists. */
+unsigned int tomoyo_quota_for_query;
+
+/**
+ * tomoyo_read_memory_counter - Check for memory usage in bytes.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns memory usage.
+ */
+void tomoyo_read_memory_counter(struct tomoyo_io_buffer *head)
+{
+	if (!head->r.eof) {
+		const unsigned int policy
+			= atomic_read(&tomoyo_policy_memory_size);
+		const unsigned int query = tomoyo_query_memory_size;
+		char buffer[64];
+
+		memset(buffer, 0, sizeof(buffer));
+		if (tomoyo_quota_for_policy)
+			snprintf(buffer, sizeof(buffer) - 1,
+				 "   (Quota: %10u)",
+				 tomoyo_quota_for_policy);
+		else
+			buffer[0] = '\0';
+		tomoyo_io_printf(head, "Policy:       %10u%s\n", policy,
+				 buffer);
+		if (tomoyo_quota_for_query)
+			snprintf(buffer, sizeof(buffer) - 1,
+				 "   (Quota: %10u)",
+				 tomoyo_quota_for_query);
+		else
+			buffer[0] = '\0';
+		tomoyo_io_printf(head, "Query lists:  %10u%s\n", query,
+				 buffer);
+		tomoyo_io_printf(head, "Total:        %10u\n", policy + query);
+		head->r.eof = true;
+	}
+}
+
+/**
+ * tomoyo_write_memory_quota - Set memory quota.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0.
+ */
+int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head)
+{
+	char *data = head->write_buf;
+	unsigned int size;
+
+	if (sscanf(data, "Policy: %u", &size) == 1)
+		tomoyo_quota_for_policy = size;
+	else if (sscanf(data, "Query lists: %u", &size) == 1)
+		tomoyo_quota_for_query = size;
+	return 0;
+}
diff --git a/security/tomoyo/mount.c b/security/tomoyo/mount.c
new file mode 100644
index 00000000000..82bf8c2390b
--- /dev/null
+++ b/security/tomoyo/mount.c
@@ -0,0 +1,284 @@
+/*
+ * security/tomoyo/mount.c
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+/* Keywords for mount restrictions. */
+
+/* Allow to call 'mount --bind /source_dir /dest_dir' */
+#define TOMOYO_MOUNT_BIND_KEYWORD                        "--bind"
+/* Allow to call 'mount --move /old_dir    /new_dir ' */
+#define TOMOYO_MOUNT_MOVE_KEYWORD                        "--move"
+/* Allow to call 'mount -o remount /dir             ' */
+#define TOMOYO_MOUNT_REMOUNT_KEYWORD                     "--remount"
+/* Allow to call 'mount --make-unbindable /dir'       */
+#define TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD             "--make-unbindable"
+/* Allow to call 'mount --make-private /dir'          */
+#define TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD                "--make-private"
+/* Allow to call 'mount --make-slave /dir'            */
+#define TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD                  "--make-slave"
+/* Allow to call 'mount --make-shared /dir'           */
+#define TOMOYO_MOUNT_MAKE_SHARED_KEYWORD                 "--make-shared"
+
+/**
+ * tomoyo_audit_mount_log - Audit mount log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_mount_log(struct tomoyo_request_info *r)
+{
+	const char *dev = r->param.mount.dev->name;
+	const char *dir = r->param.mount.dir->name;
+	const char *type = r->param.mount.type->name;
+	const unsigned long flags = r->param.mount.flags;
+	if (r->granted)
+		return 0;
+	if (!strcmp(type, TOMOYO_MOUNT_REMOUNT_KEYWORD))
+		tomoyo_warn_log(r, "mount -o remount %s 0x%lX", dir, flags);
+	else if (!strcmp(type, TOMOYO_MOUNT_BIND_KEYWORD)
+		 || !strcmp(type, TOMOYO_MOUNT_MOVE_KEYWORD))
+		tomoyo_warn_log(r, "mount %s %s %s 0x%lX", type, dev, dir,
+				flags);
+	else if (!strcmp(type, TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_SHARED_KEYWORD))
+		tomoyo_warn_log(r, "mount %s %s 0x%lX", type, dir, flags);
+	else
+		tomoyo_warn_log(r, "mount -t %s %s %s 0x%lX", type, dev, dir,
+				flags);
+	return tomoyo_supervisor(r,
+				 TOMOYO_KEYWORD_ALLOW_MOUNT "%s %s %s 0x%lX\n",
+				 tomoyo_pattern(r->param.mount.dev),
+				 tomoyo_pattern(r->param.mount.dir), type,
+				 flags);
+}
+
+static bool tomoyo_check_mount_acl(struct tomoyo_request_info *r,
+				   const struct tomoyo_acl_info *ptr)
+{
+	const struct tomoyo_mount_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return tomoyo_compare_number_union(r->param.mount.flags, &acl->flags) &&
+		tomoyo_compare_name_union(r->param.mount.type, &acl->fs_type) &&
+		tomoyo_compare_name_union(r->param.mount.dir, &acl->dir_name) &&
+		(!r->param.mount.need_dev ||
+		 tomoyo_compare_name_union(r->param.mount.dev, &acl->dev_name));
+}
+
+/**
+ * tomoyo_mount_acl - Check permission for mount() operation.
+ *
+ * @r:        Pointer to "struct tomoyo_request_info".
+ * @dev_name: Name of device file.
+ * @dir:      Pointer to "struct path".
+ * @type:     Name of filesystem type.
+ * @flags:    Mount options.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static int tomoyo_mount_acl(struct tomoyo_request_info *r, char *dev_name,
+			    struct path *dir, char *type, unsigned long flags)
+{
+	struct path path;
+	struct file_system_type *fstype = NULL;
+	const char *requested_type = NULL;
+	const char *requested_dir_name = NULL;
+	const char *requested_dev_name = NULL;
+	struct tomoyo_path_info rtype;
+	struct tomoyo_path_info rdev;
+	struct tomoyo_path_info rdir;
+	int need_dev = 0;
+	int error = -ENOMEM;
+
+	/* Get fstype. */
+	requested_type = tomoyo_encode(type);
+	if (!requested_type)
+		goto out;
+	rtype.name = requested_type;
+	tomoyo_fill_path_info(&rtype);
+
+	/* Get mount point. */
+	requested_dir_name = tomoyo_realpath_from_path(dir);
+	if (!requested_dir_name) {
+		error = -ENOMEM;
+		goto out;
+	}
+	rdir.name = requested_dir_name;
+	tomoyo_fill_path_info(&rdir);
+
+	/* Compare fs name. */
+	if (!strcmp(type, TOMOYO_MOUNT_REMOUNT_KEYWORD)) {
+		/* dev_name is ignored. */
+	} else if (!strcmp(type, TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_SHARED_KEYWORD)) {
+		/* dev_name is ignored. */
+	} else if (!strcmp(type, TOMOYO_MOUNT_BIND_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MOVE_KEYWORD)) {
+		need_dev = -1; /* dev_name is a directory */
+	} else {
+		fstype = get_fs_type(type);
+		if (!fstype) {
+			error = -ENODEV;
+			goto out;
+		}
+		if (fstype->fs_flags & FS_REQUIRES_DEV)
+			/* dev_name is a block device file. */
+			need_dev = 1;
+	}
+	if (need_dev) {
+		/* Get mount point or device file. */
+		if (kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
+			error = -ENOENT;
+			goto out;
+		}
+		requested_dev_name = tomoyo_realpath_from_path(&path);
+		if (!requested_dev_name) {
+			error = -ENOENT;
+			goto out;
+		}
+	} else {
+		/* Map dev_name to "<NULL>" if no dev_name given. */
+		if (!dev_name)
+			dev_name = "<NULL>";
+		requested_dev_name = tomoyo_encode(dev_name);
+		if (!requested_dev_name) {
+			error = -ENOMEM;
+			goto out;
+		}
+	}
+	rdev.name = requested_dev_name;
+	tomoyo_fill_path_info(&rdev);
+	r->param_type = TOMOYO_TYPE_MOUNT_ACL;
+	r->param.mount.need_dev = need_dev;
+	r->param.mount.dev = &rdev;
+	r->param.mount.dir = &rdir;
+	r->param.mount.type = &rtype;
+	r->param.mount.flags = flags;
+	do {
+		tomoyo_check_acl(r, tomoyo_check_mount_acl);
+		error = tomoyo_audit_mount_log(r);
+	} while (error == TOMOYO_RETRY_REQUEST);
+ out:
+	kfree(requested_dev_name);
+	kfree(requested_dir_name);
+	if (fstype)
+		put_filesystem(fstype);
+	kfree(requested_type);
+	return error;
+}
+
+/**
+ * tomoyo_mount_permission - Check permission for mount() operation.
+ *
+ * @dev_name:  Name of device file.
+ * @path:      Pointer to "struct path".
+ * @type:      Name of filesystem type. May be NULL.
+ * @flags:     Mount options.
+ * @data_page: Optional data. May be NULL.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+int tomoyo_mount_permission(char *dev_name, struct path *path, char *type,
+			    unsigned long flags, void *data_page)
+{
+	struct tomoyo_request_info r;
+	int error;
+	int idx;
+
+	if (tomoyo_init_request_info(&r, NULL, TOMOYO_MAC_FILE_MOUNT)
+	    == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	if ((flags & MS_MGC_MSK) == MS_MGC_VAL)
+		flags &= ~MS_MGC_MSK;
+	if (flags & MS_REMOUNT) {
+		type = TOMOYO_MOUNT_REMOUNT_KEYWORD;
+		flags &= ~MS_REMOUNT;
+	}
+	if (flags & MS_MOVE) {
+		type = TOMOYO_MOUNT_MOVE_KEYWORD;
+		flags &= ~MS_MOVE;
+	}
+	if (flags & MS_BIND) {
+		type = TOMOYO_MOUNT_BIND_KEYWORD;
+		flags &= ~MS_BIND;
+	}
+	if (flags & MS_UNBINDABLE) {
+		type = TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD;
+		flags &= ~MS_UNBINDABLE;
+	}
+	if (flags & MS_PRIVATE) {
+		type = TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD;
+		flags &= ~MS_PRIVATE;
+	}
+	if (flags & MS_SLAVE) {
+		type = TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD;
+		flags &= ~MS_SLAVE;
+	}
+	if (flags & MS_SHARED) {
+		type = TOMOYO_MOUNT_MAKE_SHARED_KEYWORD;
+		flags &= ~MS_SHARED;
+	}
+	if (!type)
+		type = "<NULL>";
+	idx = tomoyo_read_lock();
+	error = tomoyo_mount_acl(&r, dev_name, path, type, flags);
+	tomoyo_read_unlock(idx);
+	return error;
+}
+
+static bool tomoyo_same_mount_acl(const struct tomoyo_acl_info *a,
+				  const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_mount_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_mount_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head) &&
+		tomoyo_same_name_union(&p1->dev_name, &p2->dev_name) &&
+		tomoyo_same_name_union(&p1->dir_name, &p2->dir_name) &&
+		tomoyo_same_name_union(&p1->fs_type, &p2->fs_type) &&
+		tomoyo_same_number_union(&p1->flags, &p2->flags);
+}
+
+/**
+ * tomoyo_write_mount - Write "struct tomoyo_mount_acl" list.
+ *
+ * @data:      String to parse.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+int tomoyo_write_mount(char *data, struct tomoyo_domain_info *domain,
+		       const bool is_delete)
+{
+	struct tomoyo_mount_acl e = { .head.type = TOMOYO_TYPE_MOUNT_ACL };
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	char *w[4];
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[3][0])
+		return -EINVAL;
+	if (!tomoyo_parse_name_union(w[0], &e.dev_name) ||
+	    !tomoyo_parse_name_union(w[1], &e.dir_name) ||
+	    !tomoyo_parse_name_union(w[2], &e.fs_type) ||
+	    !tomoyo_parse_number_union(w[3], &e.flags))
+		goto out;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_mount_acl, NULL);
+ out:
+	tomoyo_put_name_union(&e.dev_name);
+	tomoyo_put_name_union(&e.dir_name);
+	tomoyo_put_name_union(&e.fs_type);
+	tomoyo_put_number_union(&e.flags);
+	return error;
+}
diff --git a/security/tomoyo/path_group.c b/security/tomoyo/path_group.c
deleted file mode 100644
index c988041c8e1..00000000000
--- a/security/tomoyo/path_group.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * security/tomoyo/path_group.c
- *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- */
-
-#include <linux/slab.h>
-#include "common.h"
-/* The list for "struct ccs_path_group". */
-LIST_HEAD(tomoyo_path_group_list);
-
-/**
- * tomoyo_get_path_group - Allocate memory for "struct tomoyo_path_group".
- *
- * @group_name: The name of pathname group.
- *
- * Returns pointer to "struct tomoyo_path_group" on success, NULL otherwise.
- */
-struct tomoyo_path_group *tomoyo_get_path_group(const char *group_name)
-{
-	struct tomoyo_path_group *entry = NULL;
-	struct tomoyo_path_group *group = NULL;
-	const struct tomoyo_path_info *saved_group_name;
-	int error = -ENOMEM;
-	if (!tomoyo_is_correct_path(group_name, 0, 0, 0) ||
-	    !group_name[0])
-		return NULL;
-	saved_group_name = tomoyo_get_name(group_name);
-	if (!saved_group_name)
-		return NULL;
-	entry = kzalloc(sizeof(*entry), GFP_NOFS);
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(group, &tomoyo_path_group_list, list) {
-		if (saved_group_name != group->group_name)
-			continue;
-		atomic_inc(&group->users);
-		error = 0;
-		break;
-	}
-	if (error && tomoyo_memory_ok(entry)) {
-		INIT_LIST_HEAD(&entry->member_list);
-		entry->group_name = saved_group_name;
-		saved_group_name = NULL;
-		atomic_set(&entry->users, 1);
-		list_add_tail_rcu(&entry->list, &tomoyo_path_group_list);
-		group = entry;
-		entry = NULL;
-		error = 0;
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(saved_group_name);
-	kfree(entry);
-	return !error ? group : NULL;
-}
-
-/**
- * tomoyo_write_path_group_policy - Write "struct tomoyo_path_group" list.
- *
- * @data:      String to parse.
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, nagative value otherwise.
- */
-int tomoyo_write_path_group_policy(char *data, const bool is_delete)
-{
-	struct tomoyo_path_group *group;
-	struct tomoyo_path_group_member *member;
-	struct tomoyo_path_group_member e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
-	char *w[2];
-	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
-		return -EINVAL;
-	group = tomoyo_get_path_group(w[0]);
-	if (!group)
-		return -ENOMEM;
-	e.member_name = tomoyo_get_name(w[1]);
-	if (!e.member_name)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(member, &group->member_list, list) {
-		if (member->member_name != e.member_name)
-			continue;
-		member->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path_group_member *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &group->member_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(e.member_name);
-	tomoyo_put_path_group(group);
-	return error;
-}
-
-/**
- * tomoyo_read_path_group_policy - Read "struct tomoyo_path_group" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_path_group_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *gpos;
-	struct list_head *mpos;
-	list_for_each_cookie(gpos, head->read_var1, &tomoyo_path_group_list) {
-		struct tomoyo_path_group *group;
-		group = list_entry(gpos, struct tomoyo_path_group, list);
-		list_for_each_cookie(mpos, head->read_var2,
-				     &group->member_list) {
-			struct tomoyo_path_group_member *member;
-			member = list_entry(mpos,
-					    struct tomoyo_path_group_member,
-					    list);
-			if (member->is_deleted)
-				continue;
-			if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_PATH_GROUP
-					      "%s %s\n",
-					      group->group_name->name,
-					      member->member_name->name))
-				return false;
-		}
-	}
-	return true;
-}
-
-/**
- * tomoyo_path_matches_group - Check whether the given pathname matches members of the given pathname group.
- *
- * @pathname:        The name of pathname.
- * @group:           Pointer to "struct tomoyo_path_group".
- * @may_use_pattern: True if wild card is permitted.
- *
- * Returns true if @pathname matches pathnames in @group, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
-			       const struct tomoyo_path_group *group,
-			       const bool may_use_pattern)
-{
-	struct tomoyo_path_group_member *member;
-	bool matched = false;
-	list_for_each_entry_rcu(member, &group->member_list, list) {
-		if (member->is_deleted)
-			continue;
-		if (!member->member_name->is_patterned) {
-			if (tomoyo_pathcmp(pathname, member->member_name))
-				continue;
-		} else if (may_use_pattern) {
-			if (!tomoyo_path_matches_pattern(pathname,
-							 member->member_name))
-				continue;
-		} else
-			continue;
-		matched = true;
-		break;
-	}
-	return matched;
-}
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index d1b96f01962..ed8ccd68010 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -1,174 +1,164 @@
 /*
  * security/tomoyo/realpath.c
  *
- * Get the canonicalized absolute pathnames. The basis for TOMOYO.
- *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
+ * Pathname calculation functions for TOMOYO.
  *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/types.h>
 #include <linux/mount.h>
 #include <linux/mnt_namespace.h>
 #include <linux/fs_struct.h>
-#include <linux/hash.h>
 #include <linux/magic.h>
 #include <linux/slab.h>
+#include <net/sock.h>
 #include "common.h"
 
 /**
  * tomoyo_encode: Convert binary string to ascii string.
  *
- * @buffer:  Buffer for ASCII string.
- * @buflen:  Size of @buffer.
- * @str:     Binary string.
+ * @str: String in binary format.
+ *
+ * Returns pointer to @str in ascii format on success, NULL otherwise.
  *
- * Returns 0 on success, -ENOMEM otherwise.
+ * This function uses kzalloc(), so caller must kfree() if this function
+ * didn't return NULL.
  */
-int tomoyo_encode(char *buffer, int buflen, const char *str)
+char *tomoyo_encode(const char *str)
 {
-	while (1) {
-		const unsigned char c = *(unsigned char *) str++;
+	int len = 0;
+	const char *p = str;
+	char *cp;
+	char *cp0;
 
-		if (tomoyo_is_valid(c)) {
-			if (--buflen <= 0)
-				break;
-			*buffer++ = (char) c;
-			if (c != '\\')
-				continue;
-			if (--buflen <= 0)
-				break;
-			*buffer++ = (char) c;
-			continue;
-		}
-		if (!c) {
-			if (--buflen <= 0)
-				break;
-			*buffer = '\0';
-			return 0;
+	if (!p)
+		return NULL;
+	while (*p) {
+		const unsigned char c = *p++;
+		if (c == '\\')
+			len += 2;
+		else if (c > ' ' && c < 127)
+			len++;
+		else
+			len += 4;
+	}
+	len++;
+	/* Reserve space for appending "/". */
+	cp = kzalloc(len + 10, GFP_NOFS);
+	if (!cp)
+		return NULL;
+	cp0 = cp;
+	p = str;
+	while (*p) {
+		const unsigned char c = *p++;
+
+		if (c == '\\') {
+			*cp++ = '\\';
+			*cp++ = '\\';
+		} else if (c > ' ' && c < 127) {
+			*cp++ = c;
+		} else {
+			*cp++ = '\\';
+			*cp++ = (c >> 6) + '0';
+			*cp++ = ((c >> 3) & 7) + '0';
+			*cp++ = (c & 7) + '0';
 		}
-		buflen -= 4;
-		if (buflen <= 0)
-			break;
-		*buffer++ = '\\';
-		*buffer++ = (c >> 6) + '0';
-		*buffer++ = ((c >> 3) & 7) + '0';
-		*buffer++ = (c & 7) + '0';
 	}
-	return -ENOMEM;
+	return cp0;
 }
 
 /**
- * tomoyo_realpath_from_path2 - Returns realpath(3) of the given dentry but ignores chroot'ed root.
+ * tomoyo_realpath_from_path - Returns realpath(3) of the given pathname but ignores chroot'ed root.
  *
- * @path:        Pointer to "struct path".
- * @newname:     Pointer to buffer to return value in.
- * @newname_len: Size of @newname.
+ * @path: Pointer to "struct path".
  *
- * Returns 0 on success, negative value otherwise.
+ * Returns the realpath of the given @path on success, NULL otherwise.
  *
  * If dentry is a directory, trailing '/' is appended.
  * Characters out of 0x20 < c < 0x7F range are converted to
  * \ooo style octal string.
  * Character \ is converted to \\ string.
+ *
+ * These functions use kzalloc(), so the caller must call kfree()
+ * if these functions didn't return NULL.
  */
-int tomoyo_realpath_from_path2(struct path *path, char *newname,
-			       int newname_len)
+char *tomoyo_realpath_from_path(struct path *path)
 {
-	int error = -ENOMEM;
+	char *buf = NULL;
+	char *name = NULL;
+	unsigned int buf_len = PAGE_SIZE / 2;
 	struct dentry *dentry = path->dentry;
-	char *sp;
-
-	if (!dentry || !path->mnt || !newname || newname_len <= 2048)
-		return -EINVAL;
-	if (dentry->d_op && dentry->d_op->d_dname) {
+	bool is_dir;
+	if (!dentry)
+		return NULL;
+	is_dir = dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode);
+	while (1) {
+		struct path ns_root = { .mnt = NULL, .dentry = NULL };
+		char *pos;
+		buf_len <<= 1;
+		kfree(buf);
+		buf = kmalloc(buf_len, GFP_NOFS);
+		if (!buf)
+			break;
+		/* Get better name for socket. */
+		if (dentry->d_sb && dentry->d_sb->s_magic == SOCKFS_MAGIC) {
+			struct inode *inode = dentry->d_inode;
+			struct socket *sock = inode ? SOCKET_I(inode) : NULL;
+			struct sock *sk = sock ? sock->sk : NULL;
+			if (sk) {
+				snprintf(buf, buf_len - 1, "socket:[family=%u:"
+					 "type=%u:protocol=%u]", sk->sk_family,
+					 sk->sk_type, sk->sk_protocol);
+			} else {
+				snprintf(buf, buf_len - 1, "socket:[unknown]");
+			}
+			name = tomoyo_encode(buf);
+			break;
+		}
 		/* For "socket:[\$]" and "pipe:[\$]". */
-		static const int offset = 1536;
-		sp = dentry->d_op->d_dname(dentry, newname + offset,
-					   newname_len - offset);
-	} else {
-		struct path ns_root = {.mnt = NULL, .dentry = NULL};
-
+		if (dentry->d_op && dentry->d_op->d_dname) {
+			pos = dentry->d_op->d_dname(dentry, buf, buf_len - 1);
+			if (IS_ERR(pos))
+				continue;
+			name = tomoyo_encode(pos);
+			break;
+		}
+		/* If we don't have a vfsmount, we can't calculate. */
+		if (!path->mnt)
+			break;
 		spin_lock(&dcache_lock);
 		/* go to whatever namespace root we are under */
-		sp = __d_path(path, &ns_root, newname, newname_len);
+		pos = __d_path(path, &ns_root, buf, buf_len);
 		spin_unlock(&dcache_lock);
 		/* Prepend "/proc" prefix if using internal proc vfs mount. */
-		if (!IS_ERR(sp) && (path->mnt->mnt_flags & MNT_INTERNAL) &&
+		if (!IS_ERR(pos) && (path->mnt->mnt_flags & MNT_INTERNAL) &&
 		    (path->mnt->mnt_sb->s_magic == PROC_SUPER_MAGIC)) {
-			sp -= 5;
-			if (sp >= newname)
-				memcpy(sp, "/proc", 5);
+			pos -= 5;
+			if (pos >= buf)
+				memcpy(pos, "/proc", 5);
 			else
-				sp = ERR_PTR(-ENOMEM);
-		}
-	}
-	if (IS_ERR(sp))
-		error = PTR_ERR(sp);
-	else
-		error = tomoyo_encode(newname, sp - newname, sp);
-	/* Append trailing '/' if dentry is a directory. */
-	if (!error && dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)
-	    && *newname) {
-		sp = newname + strlen(newname);
-		if (*(sp - 1) != '/') {
-			if (sp < newname + newname_len - 4) {
-				*sp++ = '/';
-				*sp = '\0';
-			} else {
-				error = -ENOMEM;
-			}
+				pos = ERR_PTR(-ENOMEM);
 		}
+		if (IS_ERR(pos))
+			continue;
+		name = tomoyo_encode(pos);
+		break;
 	}
-	if (error)
-		printk(KERN_WARNING "tomoyo_realpath: Pathname too long.\n");
-	return error;
-}
-
-/**
- * tomoyo_realpath_from_path - Returns realpath(3) of the given pathname but ignores chroot'ed root.
- *
- * @path: Pointer to "struct path".
- *
- * Returns the realpath of the given @path on success, NULL otherwise.
- *
- * These functions use kzalloc(), so the caller must call kfree()
- * if these functions didn't return NULL.
- */
-char *tomoyo_realpath_from_path(struct path *path)
-{
-	char *buf = kzalloc(sizeof(struct tomoyo_page_buffer), GFP_NOFS);
-
-	BUILD_BUG_ON(sizeof(struct tomoyo_page_buffer)
-		     <= TOMOYO_MAX_PATHNAME_LEN - 1);
-	if (!buf)
-		return NULL;
-	if (tomoyo_realpath_from_path2(path, buf,
-				       TOMOYO_MAX_PATHNAME_LEN - 1) == 0)
-		return buf;
 	kfree(buf);
-	return NULL;
-}
-
-/**
- * tomoyo_realpath - Get realpath of a pathname.
- *
- * @pathname: The pathname to solve.
- *
- * Returns the realpath of @pathname on success, NULL otherwise.
- */
-char *tomoyo_realpath(const char *pathname)
-{
-	struct path path;
-
-	if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
-		char *buf = tomoyo_realpath_from_path(&path);
-		path_put(&path);
-		return buf;
+	if (!name)
+		tomoyo_warn_oom(__func__);
+	else if (is_dir && *name) {
+		/* Append trailing '/' if dentry is a directory. */
+		char *pos = name + strlen(name) - 1;
+		if (*pos != '/')
+			/*
+			 * This is OK because tomoyo_encode() reserves space
+			 * for appending "/".
+			 */
+			*++pos = '/';
 	}
-	return NULL;
+	return name;
 }
 
 /**
@@ -189,191 +179,3 @@ char *tomoyo_realpath_nofollow(const char *pathname)
 	}
 	return NULL;
 }
-
-/* Memory allocated for non-string data. */
-static atomic_t tomoyo_policy_memory_size;
-/* Quota for holding policy. */
-static unsigned int tomoyo_quota_for_policy;
-
-/**
- * tomoyo_memory_ok - Check memory quota.
- *
- * @ptr: Pointer to allocated memory.
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_policy_lock.
- * Memory pointed by @ptr will be zeroed on success.
- */
-bool tomoyo_memory_ok(void *ptr)
-{
-	int allocated_len = ptr ? ksize(ptr) : 0;
-	atomic_add(allocated_len, &tomoyo_policy_memory_size);
-	if (ptr && (!tomoyo_quota_for_policy ||
-		    atomic_read(&tomoyo_policy_memory_size)
-		    <= tomoyo_quota_for_policy)) {
-		memset(ptr, 0, allocated_len);
-		return true;
-	}
-	printk(KERN_WARNING "ERROR: Out of memory "
-	       "for tomoyo_alloc_element().\n");
-	if (!tomoyo_policy_loaded)
-		panic("MAC Initialization failed.\n");
-	return false;
-}
-
-/**
- * tomoyo_commit_ok - Check memory quota.
- *
- * @data:   Data to copy from.
- * @size:   Size in byte.
- *
- * Returns pointer to allocated memory on success, NULL otherwise.
- */
-void *tomoyo_commit_ok(void *data, const unsigned int size)
-{
-	void *ptr = kzalloc(size, GFP_NOFS);
-	if (tomoyo_memory_ok(ptr)) {
-		memmove(ptr, data, size);
-		memset(data, 0, size);
-		return ptr;
-	}
-	return NULL;
-}
-
-/**
- * tomoyo_memory_free - Free memory for elements.
- *
- * @ptr:  Pointer to allocated memory.
- */
-void tomoyo_memory_free(void *ptr)
-{
-	atomic_sub(ksize(ptr), &tomoyo_policy_memory_size);
-	kfree(ptr);
-}
-
-/*
- * tomoyo_name_list is used for holding string data used by TOMOYO.
- * Since same string data is likely used for multiple times (e.g.
- * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of
- * "const struct tomoyo_path_info *".
- */
-struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
-
-/**
- * tomoyo_get_name - Allocate permanent memory for string data.
- *
- * @name: The string to store into the permernent memory.
- *
- * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
- */
-const struct tomoyo_path_info *tomoyo_get_name(const char *name)
-{
-	struct tomoyo_name_entry *ptr;
-	unsigned int hash;
-	int len;
-	int allocated_len;
-	struct list_head *head;
-
-	if (!name)
-		return NULL;
-	len = strlen(name) + 1;
-	hash = full_name_hash((const unsigned char *) name, len - 1);
-	head = &tomoyo_name_list[hash_long(hash, TOMOYO_HASH_BITS)];
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		return NULL;
-	list_for_each_entry(ptr, head, list) {
-		if (hash != ptr->entry.hash || strcmp(name, ptr->entry.name))
-			continue;
-		atomic_inc(&ptr->users);
-		goto out;
-	}
-	ptr = kzalloc(sizeof(*ptr) + len, GFP_NOFS);
-	allocated_len = ptr ? ksize(ptr) : 0;
-	if (!ptr || (tomoyo_quota_for_policy &&
-		     atomic_read(&tomoyo_policy_memory_size) + allocated_len
-		     > tomoyo_quota_for_policy)) {
-		kfree(ptr);
-		printk(KERN_WARNING "ERROR: Out of memory "
-		       "for tomoyo_get_name().\n");
-		if (!tomoyo_policy_loaded)
-			panic("MAC Initialization failed.\n");
-		ptr = NULL;
-		goto out;
-	}
-	atomic_add(allocated_len, &tomoyo_policy_memory_size);
-	ptr->entry.name = ((char *) ptr) + sizeof(*ptr);
-	memmove((char *) ptr->entry.name, name, len);
-	atomic_set(&ptr->users, 1);
-	tomoyo_fill_path_info(&ptr->entry);
-	list_add_tail(&ptr->list, head);
- out:
-	mutex_unlock(&tomoyo_policy_lock);
-	return ptr ? &ptr->entry : NULL;
-}
-
-/**
- * tomoyo_realpath_init - Initialize realpath related code.
- */
-void __init tomoyo_realpath_init(void)
-{
-	int i;
-
-	BUILD_BUG_ON(TOMOYO_MAX_PATHNAME_LEN > PATH_MAX);
-	for (i = 0; i < TOMOYO_MAX_HASH; i++)
-		INIT_LIST_HEAD(&tomoyo_name_list[i]);
-	INIT_LIST_HEAD(&tomoyo_kernel_domain.acl_info_list);
-	tomoyo_kernel_domain.domainname = tomoyo_get_name(TOMOYO_ROOT_NAME);
-	/*
-	 * tomoyo_read_lock() is not needed because this function is
-	 * called before the first "delete" request.
-	 */
-	list_add_tail_rcu(&tomoyo_kernel_domain.list, &tomoyo_domain_list);
-	if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain)
-		panic("Can't register tomoyo_kernel_domain");
-}
-
-/**
- * tomoyo_read_memory_counter - Check for memory usage in bytes.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns memory usage.
- */
-int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head)
-{
-	if (!head->read_eof) {
-		const unsigned int policy
-			= atomic_read(&tomoyo_policy_memory_size);
-		char buffer[64];
-
-		memset(buffer, 0, sizeof(buffer));
-		if (tomoyo_quota_for_policy)
-			snprintf(buffer, sizeof(buffer) - 1,
-				 "   (Quota: %10u)",
-				 tomoyo_quota_for_policy);
-		else
-			buffer[0] = '\0';
-		tomoyo_io_printf(head, "Policy:  %10u%s\n", policy, buffer);
-		tomoyo_io_printf(head, "Total:   %10u\n", policy);
-		head->read_eof = true;
-	}
-	return 0;
-}
-
-/**
- * tomoyo_write_memory_quota - Set memory quota.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns 0.
- */
-int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head)
-{
-	char *data = head->write_buf;
-	unsigned int size;
-
-	if (sscanf(data, "Policy: %u", &size) == 1)
-		tomoyo_quota_for_policy = size;
-	return 0;
-}
diff --git a/security/tomoyo/securityfs_if.c b/security/tomoyo/securityfs_if.c
new file mode 100644
index 00000000000..e43d5554b50
--- /dev/null
+++ b/security/tomoyo/securityfs_if.c
@@ -0,0 +1,155 @@
+/*
+ * security/tomoyo/common.c
+ *
+ * Securityfs interface for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/security.h>
+#include "common.h"
+
+/**
+ * tomoyo_open - open() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @inode: Pointer to "struct inode".
+ * @file:  Pointer to "struct file".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_open(struct inode *inode, struct file *file)
+{
+	const int key = ((u8 *) file->f_path.dentry->d_inode->i_private)
+		- ((u8 *) NULL);
+	return tomoyo_open_control(key, file);
+}
+
+/**
+ * tomoyo_release - close() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @inode: Pointer to "struct inode".
+ * @file:  Pointer to "struct file".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_release(struct inode *inode, struct file *file)
+{
+	return tomoyo_close_control(file);
+}
+
+/**
+ * tomoyo_poll - poll() for /proc/ccs/ interface.
+ *
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static unsigned int tomoyo_poll(struct file *file, poll_table *wait)
+{
+	return tomoyo_poll_control(file, wait);
+}
+
+/**
+ * tomoyo_read - read() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file:  Pointer to "struct file".
+ * @buf:   Pointer to buffer.
+ * @count: Size of @buf.
+ * @ppos:  Unused.
+ *
+ * Returns bytes read on success, negative value otherwise.
+ */
+static ssize_t tomoyo_read(struct file *file, char __user *buf, size_t count,
+			   loff_t *ppos)
+{
+	return tomoyo_read_control(file, buf, count);
+}
+
+/**
+ * tomoyo_write - write() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file:  Pointer to "struct file".
+ * @buf:   Pointer to buffer.
+ * @count: Size of @buf.
+ * @ppos:  Unused.
+ *
+ * Returns @count on success, negative value otherwise.
+ */
+static ssize_t tomoyo_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	return tomoyo_write_control(file, buf, count);
+}
+
+/*
+ * tomoyo_operations is a "struct file_operations" which is used for handling
+ * /sys/kernel/security/tomoyo/ interface.
+ *
+ * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR).
+ * See tomoyo_io_buffer for internals.
+ */
+static const struct file_operations tomoyo_operations = {
+	.open    = tomoyo_open,
+	.release = tomoyo_release,
+	.poll    = tomoyo_poll,
+	.read    = tomoyo_read,
+	.write   = tomoyo_write,
+	.llseek  = noop_llseek,
+};
+
+/**
+ * tomoyo_create_entry - Create interface files under /sys/kernel/security/tomoyo/ directory.
+ *
+ * @name:   The name of the interface file.
+ * @mode:   The permission of the interface file.
+ * @parent: The parent directory.
+ * @key:    Type of interface.
+ *
+ * Returns nothing.
+ */
+static void __init tomoyo_create_entry(const char *name, const mode_t mode,
+				       struct dentry *parent, const u8 key)
+{
+	securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,
+			       &tomoyo_operations);
+}
+
+/**
+ * tomoyo_initerface_init - Initialize /sys/kernel/security/tomoyo/ interface.
+ *
+ * Returns 0.
+ */
+static int __init tomoyo_initerface_init(void)
+{
+	struct dentry *tomoyo_dir;
+
+	/* Don't create securityfs entries unless registered. */
+	if (current_cred()->security != &tomoyo_kernel_domain)
+		return 0;
+
+	tomoyo_dir = securityfs_create_dir("tomoyo", NULL);
+	tomoyo_create_entry("query",            0600, tomoyo_dir,
+			    TOMOYO_QUERY);
+	tomoyo_create_entry("domain_policy",    0600, tomoyo_dir,
+			    TOMOYO_DOMAINPOLICY);
+	tomoyo_create_entry("exception_policy", 0600, tomoyo_dir,
+			    TOMOYO_EXCEPTIONPOLICY);
+	tomoyo_create_entry("self_domain",      0400, tomoyo_dir,
+			    TOMOYO_SELFDOMAIN);
+	tomoyo_create_entry(".domain_status",   0600, tomoyo_dir,
+			    TOMOYO_DOMAIN_STATUS);
+	tomoyo_create_entry(".process_status",  0600, tomoyo_dir,
+			    TOMOYO_PROCESS_STATUS);
+	tomoyo_create_entry("meminfo",          0600, tomoyo_dir,
+			    TOMOYO_MEMINFO);
+	tomoyo_create_entry("profile",          0600, tomoyo_dir,
+			    TOMOYO_PROFILE);
+	tomoyo_create_entry("manager",          0600, tomoyo_dir,
+			    TOMOYO_MANAGER);
+	tomoyo_create_entry("version",          0400, tomoyo_dir,
+			    TOMOYO_VERSION);
+	return 0;
+}
+
+fs_initcall(tomoyo_initerface_init);
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index dedd97d0c16..95d3f957223 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -3,10 +3,7 @@
  *
  * LSM hooks for TOMOYO Linux.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/security.h>
@@ -96,8 +93,7 @@ static int tomoyo_bprm_check_security(struct linux_binprm *bprm)
 	return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
 }
 
-static int tomoyo_path_truncate(struct path *path, loff_t length,
-				unsigned int time_attrs)
+static int tomoyo_path_truncate(struct path *path)
 {
 	return tomoyo_path_perm(TOMOYO_TYPE_TRUNCATE, path);
 }
@@ -112,7 +108,8 @@ static int tomoyo_path_mkdir(struct path *parent, struct dentry *dentry,
 			     int mode)
 {
 	struct path path = { parent->mnt, dentry };
-	return tomoyo_path_perm(TOMOYO_TYPE_MKDIR, &path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_MKDIR, &path,
+				       mode & S_IALLUGO);
 }
 
 static int tomoyo_path_rmdir(struct path *parent, struct dentry *dentry)
@@ -133,6 +130,7 @@ static int tomoyo_path_mknod(struct path *parent, struct dentry *dentry,
 {
 	struct path path = { parent->mnt, dentry };
 	int type = TOMOYO_TYPE_CREATE;
+	const unsigned int perm = mode & S_IALLUGO;
 
 	switch (mode & S_IFMT) {
 	case S_IFCHR:
@@ -141,6 +139,12 @@ static int tomoyo_path_mknod(struct path *parent, struct dentry *dentry,
 	case S_IFBLK:
 		type = TOMOYO_TYPE_MKBLOCK;
 		break;
+	default:
+		goto no_dev;
+	}
+	return tomoyo_mkdev_perm(type, &path, perm, dev);
+ no_dev:
+	switch (mode & S_IFMT) {
 	case S_IFIFO:
 		type = TOMOYO_TYPE_MKFIFO;
 		break;
@@ -148,7 +152,7 @@ static int tomoyo_path_mknod(struct path *parent, struct dentry *dentry,
 		type = TOMOYO_TYPE_MKSOCK;
 		break;
 	}
-	return tomoyo_path_perm(type, &path);
+	return tomoyo_path_number_perm(type, &path, perm);
 }
 
 static int tomoyo_path_link(struct dentry *old_dentry, struct path *new_dir,
@@ -173,7 +177,7 @@ static int tomoyo_file_fcntl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
 {
 	if (cmd == F_SETFL && ((arg ^ file->f_flags) & O_APPEND))
-		return tomoyo_check_rewrite_permission(file);
+		return tomoyo_path_perm(TOMOYO_TYPE_REWRITE, &file->f_path);
 	return 0;
 }
 
@@ -189,23 +193,24 @@ static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
 static int tomoyo_file_ioctl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
 {
-	return tomoyo_path_perm(TOMOYO_TYPE_IOCTL, &file->f_path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_IOCTL, &file->f_path, cmd);
 }
 
 static int tomoyo_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
 			     mode_t mode)
 {
 	struct path path = { mnt, dentry };
-	return tomoyo_path_perm(TOMOYO_TYPE_CHMOD, &path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_CHMOD, &path,
+				       mode & S_IALLUGO);
 }
 
 static int tomoyo_path_chown(struct path *path, uid_t uid, gid_t gid)
 {
 	int error = 0;
 	if (uid != (uid_t) -1)
-		error = tomoyo_path_perm(TOMOYO_TYPE_CHOWN, path);
+		error = tomoyo_path_number_perm(TOMOYO_TYPE_CHOWN, path, uid);
 	if (!error && gid != (gid_t) -1)
-		error = tomoyo_path_perm(TOMOYO_TYPE_CHGRP, path);
+		error = tomoyo_path_number_perm(TOMOYO_TYPE_CHGRP, path, gid);
 	return error;
 }
 
@@ -217,7 +222,7 @@ static int tomoyo_path_chroot(struct path *path)
 static int tomoyo_sb_mount(char *dev_name, struct path *path,
 			   char *type, unsigned long flags, void *data)
 {
-	return tomoyo_path_perm(TOMOYO_TYPE_MOUNT, path);
+	return tomoyo_mount_permission(dev_name, path, type, flags, data);
 }
 
 static int tomoyo_sb_umount(struct vfsmount *mnt, int flags)
@@ -277,7 +282,7 @@ static int __init tomoyo_init(void)
 		panic("Failure registering TOMOYO Linux");
 	printk(KERN_INFO "TOMOYO Linux initialized\n");
 	cred->security = &tomoyo_kernel_domain;
-	tomoyo_realpath_init();
+	tomoyo_mm_init();
 	return 0;
 }
 
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c
new file mode 100644
index 00000000000..9bfc1ee8222
--- /dev/null
+++ b/security/tomoyo/util.c
@@ -0,0 +1,963 @@
+/*
+ * security/tomoyo/util.c
+ *
+ * Utility functions for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+/* Lock for protecting policy. */
+DEFINE_MUTEX(tomoyo_policy_lock);
+
+/* Has /sbin/init started? */
+bool tomoyo_policy_loaded;
+
+/**
+ * tomoyo_parse_ulong - Parse an "unsigned long" value.
+ *
+ * @result: Pointer to "unsigned long".
+ * @str:    Pointer to string to parse.
+ *
+ * Returns value type on success, 0 otherwise.
+ *
+ * The @src is updated to point the first character after the value
+ * on success.
+ */
+static u8 tomoyo_parse_ulong(unsigned long *result, char **str)
+{
+	const char *cp = *str;
+	char *ep;
+	int base = 10;
+	if (*cp == '0') {
+		char c = *(cp + 1);
+		if (c == 'x' || c == 'X') {
+			base = 16;
+			cp += 2;
+		} else if (c >= '0' && c <= '7') {
+			base = 8;
+			cp++;
+		}
+	}
+	*result = simple_strtoul(cp, &ep, base);
+	if (cp == ep)
+		return 0;
+	*str = ep;
+	switch (base) {
+	case 16:
+		return TOMOYO_VALUE_TYPE_HEXADECIMAL;
+	case 8:
+		return TOMOYO_VALUE_TYPE_OCTAL;
+	default:
+		return TOMOYO_VALUE_TYPE_DECIMAL;
+	}
+}
+
+/**
+ * tomoyo_print_ulong - Print an "unsigned long" value.
+ *
+ * @buffer:     Pointer to buffer.
+ * @buffer_len: Size of @buffer.
+ * @value:      An "unsigned long" value.
+ * @type:       Type of @value.
+ *
+ * Returns nothing.
+ */
+void tomoyo_print_ulong(char *buffer, const int buffer_len,
+			const unsigned long value, const u8 type)
+{
+	if (type == TOMOYO_VALUE_TYPE_DECIMAL)
+		snprintf(buffer, buffer_len, "%lu", value);
+	else if (type == TOMOYO_VALUE_TYPE_OCTAL)
+		snprintf(buffer, buffer_len, "0%lo", value);
+	else if (type == TOMOYO_VALUE_TYPE_HEXADECIMAL)
+		snprintf(buffer, buffer_len, "0x%lX", value);
+	else
+		snprintf(buffer, buffer_len, "type(%u)", type);
+}
+
+/**
+ * tomoyo_parse_name_union - Parse a tomoyo_name_union.
+ *
+ * @filename: Name or name group.
+ * @ptr:      Pointer to "struct tomoyo_name_union".
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_parse_name_union(const char *filename,
+			     struct tomoyo_name_union *ptr)
+{
+	if (!tomoyo_correct_word(filename))
+		return false;
+	if (filename[0] == '@') {
+		ptr->group = tomoyo_get_group(filename + 1, TOMOYO_PATH_GROUP);
+		ptr->is_group = true;
+		return ptr->group != NULL;
+	}
+	ptr->filename = tomoyo_get_name(filename);
+	ptr->is_group = false;
+	return ptr->filename != NULL;
+}
+
+/**
+ * tomoyo_parse_number_union - Parse a tomoyo_number_union.
+ *
+ * @data: Number or number range or number group.
+ * @ptr:  Pointer to "struct tomoyo_number_union".
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_parse_number_union(char *data, struct tomoyo_number_union *num)
+{
+	u8 type;
+	unsigned long v;
+	memset(num, 0, sizeof(*num));
+	if (data[0] == '@') {
+		if (!tomoyo_correct_word(data))
+			return false;
+		num->group = tomoyo_get_group(data + 1, TOMOYO_NUMBER_GROUP);
+		num->is_group = true;
+		return num->group != NULL;
+	}
+	type = tomoyo_parse_ulong(&v, &data);
+	if (!type)
+		return false;
+	num->values[0] = v;
+	num->min_type = type;
+	if (!*data) {
+		num->values[1] = v;
+		num->max_type = type;
+		return true;
+	}
+	if (*data++ != '-')
+		return false;
+	type = tomoyo_parse_ulong(&v, &data);
+	if (!type || *data)
+		return false;
+	num->values[1] = v;
+	num->max_type = type;
+	return true;
+}
+
+/**
+ * tomoyo_byte_range - Check whether the string is a \ooo style octal value.
+ *
+ * @str: Pointer to the string.
+ *
+ * Returns true if @str is a \ooo style octal value, false otherwise.
+ *
+ * TOMOYO uses \ooo style representation for 0x01 - 0x20 and 0x7F - 0xFF.
+ * This function verifies that \ooo is in valid range.
+ */
+static inline bool tomoyo_byte_range(const char *str)
+{
+	return *str >= '0' && *str++ <= '3' &&
+		*str >= '0' && *str++ <= '7' &&
+		*str >= '0' && *str <= '7';
+}
+
+/**
+ * tomoyo_alphabet_char - Check whether the character is an alphabet.
+ *
+ * @c: The character to check.
+ *
+ * Returns true if @c is an alphabet character, false otherwise.
+ */
+static inline bool tomoyo_alphabet_char(const char c)
+{
+	return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z');
+}
+
+/**
+ * tomoyo_make_byte - Make byte value from three octal characters.
+ *
+ * @c1: The first character.
+ * @c2: The second character.
+ * @c3: The third character.
+ *
+ * Returns byte value.
+ */
+static inline u8 tomoyo_make_byte(const u8 c1, const u8 c2, const u8 c3)
+{
+	return ((c1 - '0') << 6) + ((c2 - '0') << 3) + (c3 - '0');
+}
+
+/**
+ * tomoyo_str_starts - Check whether the given string starts with the given keyword.
+ *
+ * @src:  Pointer to pointer to the string.
+ * @find: Pointer to the keyword.
+ *
+ * Returns true if @src starts with @find, false otherwise.
+ *
+ * The @src is updated to point the first character after the @find
+ * if @src starts with @find.
+ */
+bool tomoyo_str_starts(char **src, const char *find)
+{
+	const int len = strlen(find);
+	char *tmp = *src;
+
+	if (strncmp(tmp, find, len))
+		return false;
+	tmp += len;
+	*src = tmp;
+	return true;
+}
+
+/**
+ * tomoyo_normalize_line - Format string.
+ *
+ * @buffer: The line to normalize.
+ *
+ * Leading and trailing whitespaces are removed.
+ * Multiple whitespaces are packed into single space.
+ *
+ * Returns nothing.
+ */
+void tomoyo_normalize_line(unsigned char *buffer)
+{
+	unsigned char *sp = buffer;
+	unsigned char *dp = buffer;
+	bool first = true;
+
+	while (tomoyo_invalid(*sp))
+		sp++;
+	while (*sp) {
+		if (!first)
+			*dp++ = ' ';
+		first = false;
+		while (tomoyo_valid(*sp))
+			*dp++ = *sp++;
+		while (tomoyo_invalid(*sp))
+			sp++;
+	}
+	*dp = '\0';
+}
+
+/**
+ * tomoyo_tokenize - Tokenize string.
+ *
+ * @buffer: The line to tokenize.
+ * @w:      Pointer to "char *".
+ * @size:   Sizeof @w .
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_tokenize(char *buffer, char *w[], size_t size)
+{
+	int count = size / sizeof(char *);
+	int i;
+	for (i = 0; i < count; i++)
+		w[i] = "";
+	for (i = 0; i < count; i++) {
+		char *cp = strchr(buffer, ' ');
+		if (cp)
+			*cp = '\0';
+		w[i] = buffer;
+		if (!cp)
+			break;
+		buffer = cp + 1;
+	}
+	return i < count || !*buffer;
+}
+
+/**
+ * tomoyo_correct_word2 - Validate a string.
+ *
+ * @string: The string to check. May be non-'\0'-terminated.
+ * @len:    Length of @string.
+ *
+ * Check whether the given string follows the naming rules.
+ * Returns true if @string follows the naming rules, false otherwise.
+ */
+static bool tomoyo_correct_word2(const char *string, size_t len)
+{
+	const char *const start = string;
+	bool in_repetition = false;
+	unsigned char c;
+	unsigned char d;
+	unsigned char e;
+	if (!len)
+		goto out;
+	while (len--) {
+		c = *string++;
+		if (c == '\\') {
+			if (!len--)
+				goto out;
+			c = *string++;
+			switch (c) {
+			case '\\':  /* "\\" */
+				continue;
+			case '$':   /* "\$" */
+			case '+':   /* "\+" */
+			case '?':   /* "\?" */
+			case '*':   /* "\*" */
+			case '@':   /* "\@" */
+			case 'x':   /* "\x" */
+			case 'X':   /* "\X" */
+			case 'a':   /* "\a" */
+			case 'A':   /* "\A" */
+			case '-':   /* "\-" */
+				continue;
+			case '{':   /* "/\{" */
+				if (string - 3 < start || *(string - 3) != '/')
+					break;
+				in_repetition = true;
+				continue;
+			case '}':   /* "\}/" */
+				if (*string != '/')
+					break;
+				if (!in_repetition)
+					break;
+				in_repetition = false;
+				continue;
+			case '0':   /* "\ooo" */
+			case '1':
+			case '2':
+			case '3':
+				if (!len-- || !len--)
+					break;
+				d = *string++;
+				e = *string++;
+				if (d < '0' || d > '7' || e < '0' || e > '7')
+					break;
+				c = tomoyo_make_byte(c, d, e);
+				if (tomoyo_invalid(c))
+					continue; /* pattern is not \000 */
+			}
+			goto out;
+		} else if (in_repetition && c == '/') {
+			goto out;
+		} else if (tomoyo_invalid(c)) {
+			goto out;
+		}
+	}
+	if (in_repetition)
+		goto out;
+	return true;
+ out:
+	return false;
+}
+
+/**
+ * tomoyo_correct_word - Validate a string.
+ *
+ * @string: The string to check.
+ *
+ * Check whether the given string follows the naming rules.
+ * Returns true if @string follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_word(const char *string)
+{
+	return tomoyo_correct_word2(string, strlen(string));
+}
+
+/**
+ * tomoyo_correct_path - Validate a pathname.
+ *
+ * @filename: The pathname to check.
+ *
+ * Check whether the given pathname follows the naming rules.
+ * Returns true if @filename follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_path(const char *filename)
+{
+	return *filename == '/' && tomoyo_correct_word(filename);
+}
+
+/**
+ * tomoyo_correct_domain - Check whether the given domainname follows the naming rules.
+ *
+ * @domainname: The domainname to check.
+ *
+ * Returns true if @domainname follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_domain(const unsigned char *domainname)
+{
+	if (!domainname || strncmp(domainname, TOMOYO_ROOT_NAME,
+				   TOMOYO_ROOT_NAME_LEN))
+		goto out;
+	domainname += TOMOYO_ROOT_NAME_LEN;
+	if (!*domainname)
+		return true;
+	if (*domainname++ != ' ')
+		goto out;
+	while (1) {
+		const unsigned char *cp = strchr(domainname, ' ');
+		if (!cp)
+			break;
+		if (*domainname != '/' ||
+		    !tomoyo_correct_word2(domainname, cp - domainname - 1))
+			goto out;
+		domainname = cp + 1;
+	}
+	return tomoyo_correct_path(domainname);
+ out:
+	return false;
+}
+
+/**
+ * tomoyo_domain_def - Check whether the given token can be a domainname.
+ *
+ * @buffer: The token to check.
+ *
+ * Returns true if @buffer possibly be a domainname, false otherwise.
+ */
+bool tomoyo_domain_def(const unsigned char *buffer)
+{
+	return !strncmp(buffer, TOMOYO_ROOT_NAME, TOMOYO_ROOT_NAME_LEN);
+}
+
+/**
+ * tomoyo_find_domain - Find a domain by the given name.
+ *
+ * @domainname: The domainname to find.
+ *
+ * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname)
+{
+	struct tomoyo_domain_info *domain;
+	struct tomoyo_path_info name;
+
+	name.name = domainname;
+	tomoyo_fill_path_info(&name);
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+		if (!domain->is_deleted &&
+		    !tomoyo_pathcmp(&name, domain->domainname))
+			return domain;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token.
+ *
+ * @filename: The string to evaluate.
+ *
+ * Returns the initial length without a pattern in @filename.
+ */
+static int tomoyo_const_part_length(const char *filename)
+{
+	char c;
+	int len = 0;
+
+	if (!filename)
+		return 0;
+	while ((c = *filename++) != '\0') {
+		if (c != '\\') {
+			len++;
+			continue;
+		}
+		c = *filename++;
+		switch (c) {
+		case '\\':  /* "\\" */
+			len += 2;
+			continue;
+		case '0':   /* "\ooo" */
+		case '1':
+		case '2':
+		case '3':
+			c = *filename++;
+			if (c < '0' || c > '7')
+				break;
+			c = *filename++;
+			if (c < '0' || c > '7')
+				break;
+			len += 4;
+			continue;
+		}
+		break;
+	}
+	return len;
+}
+
+/**
+ * tomoyo_fill_path_info - Fill in "struct tomoyo_path_info" members.
+ *
+ * @ptr: Pointer to "struct tomoyo_path_info" to fill in.
+ *
+ * The caller sets "struct tomoyo_path_info"->name.
+ */
+void tomoyo_fill_path_info(struct tomoyo_path_info *ptr)
+{
+	const char *name = ptr->name;
+	const int len = strlen(name);
+
+	ptr->const_len = tomoyo_const_part_length(name);
+	ptr->is_dir = len && (name[len - 1] == '/');
+	ptr->is_patterned = (ptr->const_len < len);
+	ptr->hash = full_name_hash(name, len);
+}
+
+/**
+ * tomoyo_file_matches_pattern2 - Pattern matching without '/' character and "\-" pattern.
+ *
+ * @filename:     The start of string to check.
+ * @filename_end: The end of string to check.
+ * @pattern:      The start of pattern to compare.
+ * @pattern_end:  The end of pattern to compare.
+ *
+ * Returns true if @filename matches @pattern, false otherwise.
+ */
+static bool tomoyo_file_matches_pattern2(const char *filename,
+					 const char *filename_end,
+					 const char *pattern,
+					 const char *pattern_end)
+{
+	while (filename < filename_end && pattern < pattern_end) {
+		char c;
+		if (*pattern != '\\') {
+			if (*filename++ != *pattern++)
+				return false;
+			continue;
+		}
+		c = *filename;
+		pattern++;
+		switch (*pattern) {
+			int i;
+			int j;
+		case '?':
+			if (c == '/') {
+				return false;
+			} else if (c == '\\') {
+				if (filename[1] == '\\')
+					filename++;
+				else if (tomoyo_byte_range(filename + 1))
+					filename += 3;
+				else
+					return false;
+			}
+			break;
+		case '\\':
+			if (c != '\\')
+				return false;
+			if (*++filename != '\\')
+				return false;
+			break;
+		case '+':
+			if (!isdigit(c))
+				return false;
+			break;
+		case 'x':
+			if (!isxdigit(c))
+				return false;
+			break;
+		case 'a':
+			if (!tomoyo_alphabet_char(c))
+				return false;
+			break;
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+			if (c == '\\' && tomoyo_byte_range(filename + 1)
+			    && strncmp(filename + 1, pattern, 3) == 0) {
+				filename += 3;
+				pattern += 2;
+				break;
+			}
+			return false; /* Not matched. */
+		case '*':
+		case '@':
+			for (i = 0; i <= filename_end - filename; i++) {
+				if (tomoyo_file_matches_pattern2(
+						    filename + i, filename_end,
+						    pattern + 1, pattern_end))
+					return true;
+				c = filename[i];
+				if (c == '.' && *pattern == '@')
+					break;
+				if (c != '\\')
+					continue;
+				if (filename[i + 1] == '\\')
+					i++;
+				else if (tomoyo_byte_range(filename + i + 1))
+					i += 3;
+				else
+					break; /* Bad pattern. */
+			}
+			return false; /* Not matched. */
+		default:
+			j = 0;
+			c = *pattern;
+			if (c == '$') {
+				while (isdigit(filename[j]))
+					j++;
+			} else if (c == 'X') {
+				while (isxdigit(filename[j]))
+					j++;
+			} else if (c == 'A') {
+				while (tomoyo_alphabet_char(filename[j]))
+					j++;
+			}
+			for (i = 1; i <= j; i++) {
+				if (tomoyo_file_matches_pattern2(
+						    filename + i, filename_end,
+						    pattern + 1, pattern_end))
+					return true;
+			}
+			return false; /* Not matched or bad pattern. */
+		}
+		filename++;
+		pattern++;
+	}
+	while (*pattern == '\\' &&
+	       (*(pattern + 1) == '*' || *(pattern + 1) == '@'))
+		pattern += 2;
+	return filename == filename_end && pattern == pattern_end;
+}
+
+/**
+ * tomoyo_file_matches_pattern - Pattern matching without '/' character.
+ *
+ * @filename:     The start of string to check.
+ * @filename_end: The end of string to check.
+ * @pattern:      The start of pattern to compare.
+ * @pattern_end:  The end of pattern to compare.
+ *
+ * Returns true if @filename matches @pattern, false otherwise.
+ */
+static bool tomoyo_file_matches_pattern(const char *filename,
+					const char *filename_end,
+					const char *pattern,
+					const char *pattern_end)
+{
+	const char *pattern_start = pattern;
+	bool first = true;
+	bool result;
+
+	while (pattern < pattern_end - 1) {
+		/* Split at "\-" pattern. */
+		if (*pattern++ != '\\' || *pattern++ != '-')
+			continue;
+		result = tomoyo_file_matches_pattern2(filename,
+						      filename_end,
+						      pattern_start,
+						      pattern - 2);
+		if (first)
+			result = !result;
+		if (result)
+			return false;
+		first = false;
+		pattern_start = pattern;
+	}
+	result = tomoyo_file_matches_pattern2(filename, filename_end,
+					      pattern_start, pattern_end);
+	return first ? result : !result;
+}
+
+/**
+ * tomoyo_path_matches_pattern2 - Do pathname pattern matching.
+ *
+ * @f: The start of string to check.
+ * @p: The start of pattern to compare.
+ *
+ * Returns true if @f matches @p, false otherwise.
+ */
+static bool tomoyo_path_matches_pattern2(const char *f, const char *p)
+{
+	const char *f_delimiter;
+	const char *p_delimiter;
+
+	while (*f && *p) {
+		f_delimiter = strchr(f, '/');
+		if (!f_delimiter)
+			f_delimiter = f + strlen(f);
+		p_delimiter = strchr(p, '/');
+		if (!p_delimiter)
+			p_delimiter = p + strlen(p);
+		if (*p == '\\' && *(p + 1) == '{')
+			goto recursive;
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p,
+						 p_delimiter))
+			return false;
+		f = f_delimiter;
+		if (*f)
+			f++;
+		p = p_delimiter;
+		if (*p)
+			p++;
+	}
+	/* Ignore trailing "\*" and "\@" in @pattern. */
+	while (*p == '\\' &&
+	       (*(p + 1) == '*' || *(p + 1) == '@'))
+		p += 2;
+	return !*f && !*p;
+ recursive:
+	/*
+	 * The "\{" pattern is permitted only after '/' character.
+	 * This guarantees that below "*(p - 1)" is safe.
+	 * Also, the "\}" pattern is permitted only before '/' character
+	 * so that "\{" + "\}" pair will not break the "\-" operator.
+	 */
+	if (*(p - 1) != '/' || p_delimiter <= p + 3 || *p_delimiter != '/' ||
+	    *(p_delimiter - 1) != '}' || *(p_delimiter - 2) != '\\')
+		return false; /* Bad pattern. */
+	do {
+		/* Compare current component with pattern. */
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p + 2,
+						 p_delimiter - 2))
+			break;
+		/* Proceed to next component. */
+		f = f_delimiter;
+		if (!*f)
+			break;
+		f++;
+		/* Continue comparison. */
+		if (tomoyo_path_matches_pattern2(f, p_delimiter + 1))
+			return true;
+		f_delimiter = strchr(f, '/');
+	} while (f_delimiter);
+	return false; /* Not matched. */
+}
+
+/**
+ * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
+ *
+ * @filename: The filename to check.
+ * @pattern:  The pattern to compare.
+ *
+ * Returns true if matches, false otherwise.
+ *
+ * The following patterns are available.
+ *   \\     \ itself.
+ *   \ooo   Octal representation of a byte.
+ *   \*     Zero or more repetitions of characters other than '/'.
+ *   \@     Zero or more repetitions of characters other than '/' or '.'.
+ *   \?     1 byte character other than '/'.
+ *   \$     One or more repetitions of decimal digits.
+ *   \+     1 decimal digit.
+ *   \X     One or more repetitions of hexadecimal digits.
+ *   \x     1 hexadecimal digit.
+ *   \A     One or more repetitions of alphabet characters.
+ *   \a     1 alphabet character.
+ *
+ *   \-     Subtraction operator.
+ *
+ *   /\{dir\}/   '/' + 'One or more repetitions of dir/' (e.g. /dir/ /dir/dir/
+ *               /dir/dir/dir/ ).
+ */
+bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
+				 const struct tomoyo_path_info *pattern)
+{
+	const char *f = filename->name;
+	const char *p = pattern->name;
+	const int len = pattern->const_len;
+
+	/* If @pattern doesn't contain pattern, I can use strcmp(). */
+	if (!pattern->is_patterned)
+		return !tomoyo_pathcmp(filename, pattern);
+	/* Don't compare directory and non-directory. */
+	if (filename->is_dir != pattern->is_dir)
+		return false;
+	/* Compare the initial length without patterns. */
+	if (strncmp(f, p, len))
+		return false;
+	f += len;
+	p += len;
+	return tomoyo_path_matches_pattern2(f, p);
+}
+
+/**
+ * tomoyo_get_exe - Get tomoyo_realpath() of current process.
+ *
+ * Returns the tomoyo_realpath() of current process on success, NULL otherwise.
+ *
+ * This function uses kzalloc(), so the caller must call kfree()
+ * if this function didn't return NULL.
+ */
+const char *tomoyo_get_exe(void)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	const char *cp = NULL;
+
+	if (!mm)
+		return NULL;
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file) {
+			cp = tomoyo_realpath_from_path(&vma->vm_file->f_path);
+			break;
+		}
+	}
+	up_read(&mm->mmap_sem);
+	return cp;
+}
+
+/**
+ * tomoyo_get_mode - Get MAC mode.
+ *
+ * @profile: Profile number.
+ * @index:   Index number of functionality.
+ *
+ * Returns mode.
+ */
+int tomoyo_get_mode(const u8 profile, const u8 index)
+{
+	u8 mode;
+	const u8 category = TOMOYO_MAC_CATEGORY_FILE;
+	if (!tomoyo_policy_loaded)
+		return TOMOYO_CONFIG_DISABLED;
+	mode = tomoyo_profile(profile)->config[index];
+	if (mode == TOMOYO_CONFIG_USE_DEFAULT)
+		mode = tomoyo_profile(profile)->config[category];
+	if (mode == TOMOYO_CONFIG_USE_DEFAULT)
+		mode = tomoyo_profile(profile)->default_config;
+	return mode & 3;
+}
+
+/**
+ * tomoyo_init_request_info - Initialize "struct tomoyo_request_info" members.
+ *
+ * @r:      Pointer to "struct tomoyo_request_info" to initialize.
+ * @domain: Pointer to "struct tomoyo_domain_info". NULL for tomoyo_domain().
+ * @index:  Index number of functionality.
+ *
+ * Returns mode.
+ */
+int tomoyo_init_request_info(struct tomoyo_request_info *r,
+			     struct tomoyo_domain_info *domain, const u8 index)
+{
+	u8 profile;
+	memset(r, 0, sizeof(*r));
+	if (!domain)
+		domain = tomoyo_domain();
+	r->domain = domain;
+	profile = domain->profile;
+	r->profile = profile;
+	r->type = index;
+	r->mode = tomoyo_get_mode(profile, index);
+	return r->mode;
+}
+
+/**
+ * tomoyo_last_word - Get last component of a line.
+ *
+ * @line: A line.
+ *
+ * Returns the last word of a line.
+ */
+const char *tomoyo_last_word(const char *name)
+{
+	const char *cp = strrchr(name, ' ');
+	if (cp)
+		return cp + 1;
+	return name;
+}
+
+/**
+ * tomoyo_warn_log - Print warning or error message on console.
+ *
+ * @r:   Pointer to "struct tomoyo_request_info".
+ * @fmt: The printf()'s format string, followed by parameters.
+ */
+void tomoyo_warn_log(struct tomoyo_request_info *r, const char *fmt, ...)
+{
+	va_list args;
+	char *buffer;
+	const struct tomoyo_domain_info * const domain = r->domain;
+	const struct tomoyo_profile *profile = tomoyo_profile(domain->profile);
+	switch (r->mode) {
+	case TOMOYO_CONFIG_ENFORCING:
+		if (!profile->enforcing->enforcing_verbose)
+			return;
+		break;
+	case TOMOYO_CONFIG_PERMISSIVE:
+		if (!profile->permissive->permissive_verbose)
+			return;
+		break;
+	case TOMOYO_CONFIG_LEARNING:
+		if (!profile->learning->learning_verbose)
+			return;
+		break;
+	}
+	buffer = kmalloc(4096, GFP_NOFS);
+	if (!buffer)
+		return;
+	va_start(args, fmt);
+	vsnprintf(buffer, 4095, fmt, args);
+	va_end(args);
+	buffer[4095] = '\0';
+	printk(KERN_WARNING "%s: Access %s denied for %s\n",
+	       r->mode == TOMOYO_CONFIG_ENFORCING ? "ERROR" : "WARNING", buffer,
+	       tomoyo_last_word(domain->domainname->name));
+	kfree(buffer);
+}
+
+/**
+ * tomoyo_domain_quota_is_ok - Check for domain's quota.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns true if the domain is not exceeded quota, false otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
+{
+	unsigned int count = 0;
+	struct tomoyo_domain_info *domain = r->domain;
+	struct tomoyo_acl_info *ptr;
+
+	if (r->mode != TOMOYO_CONFIG_LEARNING)
+		return false;
+	if (!domain)
+		return true;
+	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
+		if (ptr->is_deleted)
+			continue;
+		switch (ptr->type) {
+			u16 perm;
+			u8 i;
+		case TOMOYO_TYPE_PATH_ACL:
+			perm = container_of(ptr, struct tomoyo_path_acl, head)
+				->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
+				count -= 2;
+			break;
+		case TOMOYO_TYPE_PATH2_ACL:
+			perm = container_of(ptr, struct tomoyo_path2_acl, head)
+				->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH2_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		case TOMOYO_TYPE_PATH_NUMBER_ACL:
+			perm = container_of(ptr, struct tomoyo_path_number_acl,
+					    head)->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH_NUMBER_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		case TOMOYO_TYPE_MKDEV_ACL:
+			perm = container_of(ptr, struct tomoyo_mkdev_acl,
+					    head)->perm;
+			for (i = 0; i < TOMOYO_MAX_MKDEV_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		default:
+			count++;
+		}
+	}
+	if (count < tomoyo_profile(domain->profile)->learning->
+	    learning_max_entry)
+		return true;
+	if (!domain->quota_warned) {
+		domain->quota_warned = true;
+		printk(KERN_WARNING "TOMOYO-WARNING: "
+		       "Domain '%s' has so many ACLs to hold. "
+		       "Stopped learning mode.\n", domain->domainname->name);
+	}
+	return false;
+}
diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index 67893372173..3ff8cc5f487 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -437,9 +437,11 @@ static int i2sbus_shutdown(struct macio_dev* dev)
 }
 
 static struct macio_driver i2sbus_drv = {
-	.name = "soundbus-i2s",
-	.owner = THIS_MODULE,
-	.match_table = i2sbus_match,
+	.driver = {
+		.name = "soundbus-i2s",
+		.owner = THIS_MODULE,
+		.of_match_table = i2sbus_match,
+	},
 	.probe = i2sbus_probe,
 	.remove = i2sbus_remove,
 #ifdef CONFIG_PM
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 428121a7e70..10c3a871a12 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -657,7 +657,7 @@ static irqreturn_t atmel_ac97c_interrupt(int irq, void *dev)
 	if (sr & AC97C_SR_CAEVT) {
 		struct snd_pcm_runtime *runtime;
 		int offset, next_period, block_size;
-		dev_info(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
+		dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
 				casr & AC97C_CSR_OVRUN   ? " OVRUN"   : "",
 				casr & AC97C_CSR_RXRDY   ? " RXRDY"   : "",
 				casr & AC97C_CSR_UNRUN   ? " UNRUN"   : "",
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 303ac04ff6e..a3b2a647924 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -451,13 +451,11 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
 	snd_pcm_timer_resolution_change(substream);
 	runtime->status->state = SNDRV_PCM_STATE_SETUP;
 
-	if (substream->latency_pm_qos_req) {
-		pm_qos_remove_request(substream->latency_pm_qos_req);
-		substream->latency_pm_qos_req = NULL;
-	}
+	if (pm_qos_request_active(&substream->latency_pm_qos_req))
+		pm_qos_remove_request(&substream->latency_pm_qos_req);
 	if ((usecs = period_to_usecs(runtime)) >= 0)
-		substream->latency_pm_qos_req = pm_qos_add_request(
-					PM_QOS_CPU_DMA_LATENCY, usecs);
+		pm_qos_add_request(&substream->latency_pm_qos_req,
+				   PM_QOS_CPU_DMA_LATENCY, usecs);
 	return 0;
  _error:
 	/* hardware might be unuseable from this time,
@@ -512,8 +510,7 @@ static int snd_pcm_hw_free(struct snd_pcm_substream *substream)
 	if (substream->ops->hw_free)
 		result = substream->ops->hw_free(substream);
 	runtime->status->state = SNDRV_PCM_STATE_OPEN;
-	pm_qos_remove_request(substream->latency_pm_qos_req);
-	substream->latency_pm_qos_req = NULL;
+	pm_qos_remove_request(&substream->latency_pm_qos_req);
 	return result;
 }
 
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f74c7372b3d..1db586af4f9 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2578,6 +2578,9 @@ static int __devinit snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
 	if (err)
 		return -err;
 
+	memset(&prev_ctl, 0, sizeof(prev_ctl));
+	prev_ctl.control_type = -1;
+
 	for (idx = 0; idx < 2000; idx++) {
 		err = hpi_mixer_get_control_by_index(
 				ss, asihpi->h_mixer,
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index e89991ea354..3b441344822 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -941,11 +941,11 @@ static void outstream_host_buffer_free(struct hpi_adapter_obj *pao,
 
 }
 
-static long outstream_get_space_available(struct hpi_hostbuffer_status
+static u32 outstream_get_space_available(struct hpi_hostbuffer_status
 	*status)
 {
-	return status->size_in_bytes - ((long)(status->host_index) -
-		(long)(status->dSP_index));
+	return status->size_in_bytes - (status->host_index -
+		status->dSP_index);
 }
 
 static void outstream_write(struct hpi_adapter_obj *pao,
@@ -954,7 +954,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long space_available;
+	u32 space_available;
 
 	if (!phw->outstream_host_buffer_size[phm->obj_index]) {
 		/* there  is no BBM buffer, write via message */
@@ -1007,7 +1007,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 	}
 
 	space_available = outstream_get_space_available(status);
-	if (space_available < (long)phm->u.d.u.data.data_size) {
+	if (space_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
@@ -1018,7 +1018,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 		&& hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
 				obj_index])) {
 		u8 *p_bbm_data;
-		long l_first_write;
+		u32 l_first_write;
 		u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 		if (hpios_locked_mem_get_virt_addr(&phw->
@@ -1248,9 +1248,9 @@ static void instream_start(struct hpi_adapter_obj *pao,
 	hw_message(pao, phm, phr);
 }
 
-static long instream_get_bytes_available(struct hpi_hostbuffer_status *status)
+static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status)
 {
-	return (long)(status->dSP_index) - (long)(status->host_index);
+	return status->dSP_index - status->host_index;
 }
 
 static void instream_read(struct hpi_adapter_obj *pao,
@@ -1259,9 +1259,9 @@ static void instream_read(struct hpi_adapter_obj *pao,
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long data_available;
+	u32 data_available;
 	u8 *p_bbm_data;
-	long l_first_read;
+	u32 l_first_read;
 	u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 	if (!phw->instream_host_buffer_size[phm->obj_index]) {
@@ -1272,7 +1272,7 @@ static void instream_read(struct hpi_adapter_obj *pao,
 
 	status = &interface->instream_host_buffer_status[phm->obj_index];
 	data_available = instream_get_bytes_available(status);
-	if (data_available < (long)phm->u.d.u.data.data_size) {
+	if (data_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a3d638c8c1f..ba2098d20cc 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -784,6 +784,9 @@ static int read_pin_defaults(struct hda_codec *codec)
 		pin->nid = nid;
 		pin->cfg = snd_hda_codec_read(codec, nid, 0,
 					      AC_VERB_GET_CONFIG_DEFAULT, 0);
+		pin->ctrl = snd_hda_codec_read(codec, nid, 0,
+					       AC_VERB_GET_PIN_WIDGET_CONTROL,
+					       0);
 	}
 	return 0;
 }
@@ -912,15 +915,38 @@ static void restore_pincfgs(struct hda_codec *codec)
 void snd_hda_shutup_pins(struct hda_codec *codec)
 {
 	int i;
+	/* don't shut up pins when unloading the driver; otherwise it breaks
+	 * the default pin setup at the next load of the driver
+	 */
+	if (codec->bus->shutdown)
+		return;
 	for (i = 0; i < codec->init_pins.used; i++) {
 		struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
 		/* use read here for syncing after issuing each verb */
 		snd_hda_codec_read(codec, pin->nid, 0,
 				   AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
 	}
+	codec->pins_shutup = 1;
 }
 EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
 
+/* Restore the pin controls cleared previously via snd_hda_shutup_pins() */
+static void restore_shutup_pins(struct hda_codec *codec)
+{
+	int i;
+	if (!codec->pins_shutup)
+		return;
+	if (codec->bus->shutdown)
+		return;
+	for (i = 0; i < codec->init_pins.used; i++) {
+		struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
+		snd_hda_codec_write(codec, pin->nid, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    pin->ctrl);
+	}
+	codec->pins_shutup = 0;
+}
+
 static void init_hda_cache(struct hda_cache_rec *cache,
 			   unsigned int record_size);
 static void free_hda_cache(struct hda_cache_rec *cache);
@@ -2907,6 +2933,7 @@ static void hda_call_codec_resume(struct hda_codec *codec)
 			    codec->afg ? codec->afg : codec->mfg,
 			    AC_PWRST_D0);
 	restore_pincfgs(codec); /* restore all current pin configs */
+	restore_shutup_pins(codec);
 	hda_exec_init_verbs(codec);
 	if (codec->patch_ops.resume)
 		codec->patch_ops.resume(codec);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 49e939e7e5c..5991d14e1ec 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -821,6 +821,7 @@ struct hda_codec {
 	unsigned int pin_amp_workaround:1; /* pin out-amp takes index
 					    * (e.g. Conexant codecs)
 					    */
+	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
@@ -897,7 +898,9 @@ void snd_hda_codec_resume_cache(struct hda_codec *codec);
 /* the struct for codec->pin_configs */
 struct hda_pincfg {
 	hda_nid_t nid;
-	unsigned int cfg;
+	unsigned char ctrl;	/* current pin control value */
+	unsigned char pad;	/* reserved */
+	unsigned int cfg;	/* default configuration */
 };
 
 unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index dc79564fea3..1df25cf5ce3 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1913,11 +1913,11 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
 	if (WARN_ONCE(!azx_dev->period_bytes,
 		      "hda-intel: zero azx_dev->period_bytes"))
 		return -1; /* this shouldn't happen! */
-	if (wallclk <= azx_dev->period_wallclk &&
+	if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
 	    pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
 		/* NG - it's below the first next period boundary */
 		return bdl_pos_adj[chip->dev_index] ? 0 : -1;
-	azx_dev->start_wallclk = wallclk;
+	azx_dev->start_wallclk += wallclk;
 	return 1; /* OK, it's fine */
 }
 
@@ -2288,6 +2288,8 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
@@ -2296,6 +2298,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
 	{}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 86067ee7863..2fc53961054 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -52,6 +52,10 @@ struct hdmi_spec {
 	 */
 	struct hda_multi_out multiout;
 	unsigned int codec_type;
+
+	/* misc flags */
+	/* PD bit indicates only the update, not the current state */
+	unsigned int old_pin_detect:1;
 };
 
 
@@ -616,6 +620,9 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
  * Unsolicited events
  */
 
+static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
+			       struct hdmi_eld *eld);
+
 static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
 	struct hdmi_spec *spec = codec->spec;
@@ -632,6 +639,12 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 	if (index < 0)
 		return;
 
+	if (spec->old_pin_detect) {
+		if (pind)
+			hdmi_present_sense(codec, tag, &spec->sink_eld[index]);
+		pind = spec->sink_eld[index].monitor_present;
+	}
+
 	spec->sink_eld[index].monitor_present = pind;
 	spec->sink_eld[index].eld_valid = eldv;
 
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 3c10c0b149f..b0652acee9b 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -478,6 +478,7 @@ static int patch_nvhdmi_8ch_89(struct hda_codec *codec)
 
 	codec->spec = spec;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP89;
+	spec->old_pin_detect = 1;
 
 	if (hdmi_parse_codec(codec) < 0) {
 		codec->spec = NULL;
@@ -508,6 +509,7 @@ static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
 	spec->multiout.max_channels = 8;
 	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
+	spec->old_pin_detect = 1;
 
 	codec->patch_ops = nvhdmi_patch_ops_8ch_7x;
 
@@ -528,6 +530,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec)
 	spec->multiout.max_channels = 2;
 	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
+	spec->old_pin_detect = 1;
 
 	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 17d4548cc35..596ea2f12cf 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1267,6 +1267,8 @@ static int alc_auto_parse_customize_define(struct hda_codec *codec)
 	unsigned nid = 0;
 	struct alc_spec *spec = codec->spec;
 
+	spec->cdefine.enable_pcbeep = 1; /* assume always enabled */
+
 	ass = codec->subsystem_id & 0xffff;
 	if (ass != codec->bus->pci->subsystem_device && (ass & 1))
 		goto do_sku;
@@ -2547,7 +2549,7 @@ static struct snd_kcontrol_new alc_beep_mixer[] = {
 static int alc_build_controls(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	struct snd_kcontrol *kctl;
+	struct snd_kcontrol *kctl = NULL;
 	struct snd_kcontrol_new *knew;
 	int i, j, err;
 	unsigned int u;
@@ -2619,16 +2621,18 @@ static int alc_build_controls(struct hda_codec *codec)
 	}
 
 	/* assign Capture Source enums to NID */
-	kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
-	if (!kctl)
-		kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
-	for (i = 0; kctl && i < kctl->count; i++) {
-		hda_nid_t *nids = spec->capsrc_nids;
-		if (!nids)
-			nids = spec->adc_nids;
-		err = snd_hda_add_nid(codec, kctl, i, nids[i]);
-		if (err < 0)
-			return err;
+	if (spec->capsrc_nids || spec->adc_nids) {
+		kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+		if (!kctl)
+			kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+		for (i = 0; kctl && i < kctl->count; i++) {
+			hda_nid_t *nids = spec->capsrc_nids;
+			if (!nids)
+				nids = spec->adc_nids;
+			err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+			if (err < 0)
+				return err;
+		}
 	}
 	if (spec->cap_mixer) {
 		const char *kname = kctl ? kctl->id.name : NULL;
@@ -5176,8 +5180,24 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nids,
 #ifdef CONFIG_SND_HDA_INPUT_BEEP
 #define set_beep_amp(spec, nid, idx, dir) \
 	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
+
+static struct snd_pci_quirk beep_white_list[] = {
+	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
+	{}
+};
+
+static inline int has_cdefine_beep(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	const struct snd_pci_quirk *q;
+	q = snd_pci_quirk_lookup(codec->bus->pci, beep_white_list);
+	if (q)
+		return q->value;
+	return spec->cdefine.enable_pcbeep;
+}
 #else
 #define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#define has_cdefine_beep(codec)		0
 #endif
 
 /*
@@ -6948,7 +6968,7 @@ static struct hda_input_mux mb5_capture_source = {
 	.num_items = 3,
 	.items = {
 		{ "Mic", 0x1 },
-		{ "Line", 0x2 },
+		{ "Line", 0x7 },
 		{ "CD", 0x4 },
 	},
 };
@@ -7469,8 +7489,8 @@ static struct snd_kcontrol_new alc885_mb5_mixer[] = {
 	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
 	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
@@ -7853,10 +7873,9 @@ static struct hda_verb alc885_mb5_init_verbs[] = {
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0x1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x7)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x4)},
 	{ }
 };
 
@@ -9476,11 +9495,16 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+	SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
+	SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_ASUS_A7M),
+	SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3),
+	SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21),
 	SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
 	SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
 	SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC885_IMAC91),
 	SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
+	SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC885_MB5),
 	/* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
 	 * so apparently no perfect solution yet
 	 */
@@ -10558,10 +10582,12 @@ static int patch_alc882(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC882_AUTO)
@@ -10611,7 +10637,7 @@ static int patch_alc882(struct hda_codec *codec)
 
 	set_capture_mixer(codec);
 
-	if (spec->cdefine.enable_pcbeep)
+	if (has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	if (board_config == ALC882_AUTO)
@@ -12427,7 +12453,7 @@ static int patch_alc262(struct hda_codec *codec)
 		}
 	}
 
-	if (!spec->no_analog) {
+	if (!spec->no_analog && has_cdefine_beep(codec)) {
 		err = snd_hda_attach_beep_device(codec, 0x1);
 		if (err < 0) {
 			alc_free(codec);
@@ -12478,7 +12504,7 @@ static int patch_alc262(struct hda_codec *codec)
 	}
 	if (!spec->cap_mixer && !spec->no_analog)
 		set_capture_mixer(codec);
-	if (!spec->no_analog && spec->cdefine.enable_pcbeep)
+	if (!spec->no_analog && has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
@@ -14450,10 +14476,12 @@ static int patch_alc269(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC269_AUTO)
@@ -14486,7 +14514,7 @@ static int patch_alc269(struct hda_codec *codec)
 
 	if (!spec->cap_mixer)
 		set_capture_mixer(codec);
-	if (spec->cdefine.enable_pcbeep)
+	if (has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
 
 	if (board_config == ALC269_AUTO)
@@ -18683,10 +18711,12 @@ static int patch_alc662(struct hda_codec *codec)
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC662_AUTO)
@@ -18708,7 +18738,7 @@ static int patch_alc662(struct hda_codec *codec)
 	if (!spec->cap_mixer)
 		set_capture_mixer(codec);
 
-	if (spec->cdefine.enable_pcbeep) {
+	if (has_cdefine_beep(codec)) {
 		switch (codec->vendor_id) {
 		case 0x10ec0662:
 			set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index 495be6e7193..24454c98d0e 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -300,7 +300,7 @@ struct snd_soc_dai au1xpsc_i2s_dai = {
 };
 EXPORT_SYMBOL(au1xpsc_i2s_dai);
 
-static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev)
+static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
 {
 	struct resource *r;
 	unsigned long sel;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 31ac5538fe7..5da30eb6ad0 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,8 +83,8 @@ config SND_SOC_ALL_CODECS
 
 config SND_SOC_WM_HUBS
 	tristate
-	default y if SND_SOC_WM8993=y
-	default m if SND_SOC_WM8993=m
+	default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
+	default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
 
 config SND_SOC_AC97_CODEC
 	tristate
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index 1072621e93f..9d1df262813 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -127,6 +127,8 @@ static __devinit int wm8727_platform_probe(struct platform_device *pdev)
 		goto err_codec;
 	}
 
+	return 0;
+
 err_codec:
 	snd_soc_unregister_codec(codec);
 err:
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 7e4a627b4c7..4e212ed62ea 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -94,7 +94,6 @@ SOC_DAPM_SINGLE("Bypass Switch", WM8776_OUTMUX, 2, 1, 0),
 
 static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
 SND_SOC_DAPM_INPUT("AUX"),
-SND_SOC_DAPM_INPUT("AUX"),
 
 SND_SOC_DAPM_INPUT("AIN1"),
 SND_SOC_DAPM_INPUT("AIN2"),
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 0417dae32e6..19ad590ca0b 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -885,7 +885,6 @@ static int wm8988_register(struct wm8988_priv *wm8988,
 	ret = snd_soc_register_dai(&wm8988_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
 		goto err_codec;
 	}
 
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 79f0f4ad242..d3955096d87 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -612,7 +612,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
 				((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
 	}
 
 	if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -623,7 +622,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
 				((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
 	}
 }
 
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 22208b373fb..e1ec6d91ea3 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -73,7 +73,7 @@ struct psc_dma {
 };
 
 /* Utility for retrieving psc_dma_stream structure from a substream */
-inline struct psc_dma_stream *
+static inline struct psc_dma_stream *
 to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
 {
 	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index eba9b9d257a..252defea93b 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -13,9 +13,18 @@ config SND_MXC_SOC_SSI
 
 config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
-	depends on SND_IMX_SOC && EXPERIMENTAL
+	depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
 	select SND_MXC_SOC_SSI
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
+
+config SND_SOC_PHYCORE_AC97
+	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+	depends on MACH_PCM043 || MACH_PCA100
+	select SND_MXC_SOC_SSI
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for SoC audio on Phytec phyCORE
+	  and phyCARD boards in AC97 mode
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a357e8c..d256f5f313b 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8750,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-		(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *spitz_snd_device;
 
 static int __init spitz_init(void)
@@ -369,10 +337,6 @@ static int __init spitz_init(void)
 	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
 		return -ENODEV;
 
-	ret = wm8750_i2c_setup();
-	if (ret != 0)
-		return ret;
-
 	spitz_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!spitz_snd_device)
 		return -ENOMEM;
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3396a0db06b..ec4acac49eb 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -683,20 +683,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
 
 	/* clock inversion (CKG2) */
 	data = 0;
-	switch (SH_FSI_INVERSION_MASK & flags) {
-	case SH_FSI_LRM_INV:
-		data = 1 << 12;
-		break;
-	case SH_FSI_BRM_INV:
-		data = 1 << 8;
-		break;
-	case SH_FSI_LRS_INV:
-		data = 1 << 4;
-		break;
-	case SH_FSI_BRS_INV:
-		data = 1 << 0;
-		break;
-	}
+	if (SH_FSI_LRM_INV & flags)
+		data |= 1 << 12;
+	if (SH_FSI_BRM_INV & flags)
+		data |= 1 << 8;
+	if (SH_FSI_LRS_INV & flags)
+		data |= 1 << 4;
+	if (SH_FSI_BRS_INV & flags)
+		data |= 1 << 0;
+
 	fsi_reg_write(fsi, CKG2, data);
 
 	/* do fmt, di fmt */
@@ -726,15 +721,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
 		break;
 	case SH_FSI_FMT_TDM:
 		msg = "TDM";
-		data = CR_FMT(CR_TDM) | (fsi->chan - 1);
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+		data = CR_FMT(CR_TDM) | (fsi->chan - 1);
 		break;
 	case SH_FSI_FMT_TDM_DELAY:
 		msg = "TDM Delay";
-		data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+		data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
 		break;
 	default:
 		dev_err(dai->dev, "unknown format.\n");
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 4c7b051f9d1..1bc56b2b94e 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -69,7 +69,6 @@ struct snd_at73c213 {
 	int				irq;
 	int				period;
 	unsigned long			bitrate;
-	struct clk			*bitclk;
 	struct ssc_device		*ssc;
 	struct spi_device		*spi;
 	u8				spi_wbuffer[2];
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index e7ac7f493a8..1e362bf8834 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -11,7 +11,8 @@ snd-usb-audio-objs := 	card.o \
 			endpoint.o \
 			urb.o \
 			pcm.o \
-			helper.o
+			helper.o \
+			clock.o
 
 snd-usbmidi-lib-objs := midi.o
 
diff --git a/sound/usb/card.c b/sound/usb/card.c
index da1346bd485..7a8ac1d81be 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -236,7 +236,6 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
 	}
 
 	case UAC_VERSION_2: {
-		struct uac_clock_source_descriptor *cs;
 		struct usb_interface_assoc_descriptor *assoc =
 			usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
 
@@ -245,21 +244,6 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
 			return -EINVAL;
 		}
 
-		/* FIXME: for now, we expect there is at least one clock source
-		 * descriptor and we always take the first one.
-		 * We should properly support devices with multiple clock sources,
-		 * clock selectors and sample rate conversion units. */
-
-		cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
-						NULL, UAC2_CLOCK_SOURCE);
-
-		if (!cs) {
-			snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
-			return -EINVAL;
-		}
-
-		chip->clock_id = cs->bClockID;
-
 		for (i = 0; i < assoc->bInterfaceCount; i++) {
 			int intf = assoc->bFirstInterface + i;
 
@@ -481,6 +465,8 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
 			goto __error;
 	}
 
+	chip->ctrl_intf = alts;
+
 	if (err > 0) {
 		/* create normal USB audio interfaces */
 		if (snd_usb_create_streams(chip, ifnum) < 0 ||
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ed92420c109..1febf2f2375 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -25,6 +25,7 @@ struct audioformat {
 	unsigned int rate_min, rate_max;	/* min/max rates */
 	unsigned int nr_rates;		/* number of rate table entries */
 	unsigned int *rate_table;	/* rate table */
+	unsigned char clock;		/* associated clock */
 };
 
 struct snd_usb_substream;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
new file mode 100644
index 00000000000..b5855114667
--- /dev/null
+++ b/sound/usb/clock.c
@@ -0,0 +1,315 @@
+/*
+ *   Clock domain and sample rate management functions
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "midi.h"
+#include "mixer.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "helper.h"
+#include "debug.h"
+#include "pcm.h"
+#include "urb.h"
+#include "format.h"
+
+static struct uac_clock_source_descriptor *
+	snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
+				  int clock_id)
+{
+	struct uac_clock_source_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_SOURCE))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static struct uac_clock_selector_descriptor *
+	snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
+				    int clock_id)
+{
+	struct uac_clock_selector_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_SELECTOR))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static struct uac_clock_multiplier_descriptor *
+	snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
+				      int clock_id)
+{
+	struct uac_clock_multiplier_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_MULTIPLIER))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+			      UAC2_CS_CUR,
+			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+			      UAC2_CX_CLOCK_SELECTOR << 8,
+			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
+			      &buf, sizeof(buf), 1000);
+
+	if (ret < 0)
+		return ret;
+
+	return buf;
+}
+
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+{
+	int err;
+	unsigned char data;
+	struct usb_device *dev = chip->dev;
+
+	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			      UAC2_CS_CONTROL_CLOCK_VALID << 8,
+			      snd_usb_ctrl_intf(chip) | (source_id << 8),
+			      &data, sizeof(data), 1000);
+
+	if (err < 0) {
+		snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+			   __func__, source_id);
+		return err;
+	}
+
+	return !!data;
+}
+
+/* Try to find the clock source ID of a given clock entity */
+
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+				   struct usb_host_interface *host_iface,
+				   int entity_id, unsigned long *visited)
+{
+	struct uac_clock_source_descriptor *source;
+	struct uac_clock_selector_descriptor *selector;
+	struct uac_clock_multiplier_descriptor *multiplier;
+
+	entity_id &= 0xff;
+
+	if (test_and_set_bit(entity_id, visited)) {
+		snd_printk(KERN_WARNING
+			"%s(): recursive clock topology detected, id %d.\n",
+			__func__, entity_id);
+		return -EINVAL;
+	}
+
+	/* first, see if the ID we're looking for is a clock source already */
+	source = snd_usb_find_clock_source(host_iface, entity_id);
+	if (source)
+		return source->bClockID;
+
+	selector = snd_usb_find_clock_selector(host_iface, entity_id);
+	if (selector) {
+		int ret;
+
+		/* the entity ID we are looking for is a selector.
+		 * find out what it currently selects */
+		ret = uac_clock_selector_get_val(chip, selector->bClockID);
+		if (ret < 0)
+			return ret;
+
+		if (ret > selector->bNrInPins || ret < 1) {
+			printk(KERN_ERR
+				"%s(): selector reported illegal value, id %d, ret %d\n",
+				__func__, selector->bClockID, ret);
+
+			return -EINVAL;
+		}
+
+		return __uac_clock_find_source(chip, host_iface,
+					       selector->baCSourceID[ret-1],
+					       visited);
+	}
+
+	/* FIXME: multipliers only act as pass-thru element for now */
+	multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+	if (multiplier)
+		return __uac_clock_find_source(chip, host_iface,
+					       multiplier->bCSourceID, visited);
+
+	return -EINVAL;
+}
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+			      struct usb_host_interface *host_iface,
+			      int entity_id)
+{
+	DECLARE_BITMAP(visited, 256);
+	memset(visited, 0, sizeof(visited));
+	return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+}
+
+static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
+			      struct usb_host_interface *alts,
+			      struct audioformat *fmt, int rate)
+{
+	struct usb_device *dev = chip->dev;
+	unsigned int ep;
+	unsigned char data[3];
+	int err, crate;
+
+	ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+	/* if endpoint doesn't have sampling rate control, bail out */
+	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
+		snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
+				   dev->devnum, iface, fmt->altsetting);
+		return 0;
+	}
+
+	data[0] = rate;
+	data[1] = rate >> 8;
+	data[2] = rate >> 16;
+	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
+			   dev->devnum, iface, fmt->altsetting, rate, ep);
+		return err;
+	}
+
+	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
+				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
+			   dev->devnum, iface, fmt->altsetting, ep);
+		return 0; /* some devices don't support reading */
+	}
+
+	crate = data[0] | (data[1] << 8) | (data[2] << 16);
+	if (crate != rate) {
+		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+		// runtime->rate = crate;
+	}
+
+	return 0;
+}
+
+static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+			      struct usb_host_interface *alts,
+			      struct audioformat *fmt, int rate)
+{
+	struct usb_device *dev = chip->dev;
+	unsigned char data[4];
+	int err, crate;
+	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+
+	if (clock < 0)
+		return clock;
+
+	if (!uac_clock_source_is_valid(chip, clock)) {
+		snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
+			   dev->devnum, iface, fmt->altsetting, clock);
+		return -ENXIO;
+	}
+
+	data[0] = rate;
+	data[1] = rate >> 8;
+	data[2] = rate >> 16;
+	data[3] = rate >> 24;
+	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
+			   dev->devnum, iface, fmt->altsetting, rate);
+		return err;
+	}
+
+	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+			   dev->devnum, iface, fmt->altsetting);
+		return err;
+	}
+
+	crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+	if (crate != rate)
+		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+
+	return 0;
+}
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+			     struct usb_host_interface *alts,
+			     struct audioformat *fmt, int rate)
+{
+	struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+
+	switch (altsd->bInterfaceProtocol) {
+	case UAC_VERSION_1:
+		return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+
+	case UAC_VERSION_2:
+		return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+	}
+
+	return -EINVAL;
+}
+
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
new file mode 100644
index 00000000000..beb253684e2
--- /dev/null
+++ b/sound/usb/clock.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_CLOCK_H
+#define __USBAUDIO_CLOCK_H
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+			     struct usb_host_interface *alts,
+			     struct audioformat *fmt, int rate);
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+			      struct usb_host_interface *host_iface,
+			      int entity_id);
+
+#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 28ee1ce3971..6f6596cf2b1 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -190,6 +190,38 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
 	return attributes;
 }
 
+static struct uac2_input_terminal_descriptor *
+	snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+					       int terminal_id)
+{
+	struct uac2_input_terminal_descriptor *term = NULL;
+
+	while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+					       ctrl_iface->extralen,
+					       term, UAC_INPUT_TERMINAL))) {
+		if (term->bTerminalID == terminal_id)
+			return term;
+	}
+
+	return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+	snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+						int terminal_id)
+{
+	struct uac2_output_terminal_descriptor *term = NULL;
+
+	while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+					       ctrl_iface->extralen,
+					       term, UAC_OUTPUT_TERMINAL))) {
+		if (term->bTerminalID == terminal_id)
+			return term;
+	}
+
+	return NULL;
+}
+
 int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 {
 	struct usb_device *dev;
@@ -199,7 +231,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 	int i, altno, err, stream;
 	int format = 0, num_channels = 0;
 	struct audioformat *fp = NULL;
-	int num, protocol;
+	int num, protocol, clock = 0;
 	struct uac_format_type_i_continuous_descriptor *fmt;
 
 	dev = chip->dev;
@@ -263,6 +295,8 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 		}
 
 		case UAC_VERSION_2: {
+			struct uac2_input_terminal_descriptor *input_term;
+			struct uac2_output_terminal_descriptor *output_term;
 			struct uac_as_header_descriptor_v2 *as =
 				snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
 
@@ -281,7 +315,25 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 			num_channels = as->bNrChannels;
 			format = le32_to_cpu(as->bmFormats);
 
-			break;
+			/* lookup the terminal associated to this interface
+			 * to extract the clock */
+			input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+									    as->bTerminalLink);
+			if (input_term) {
+				clock = input_term->bCSourceID;
+				break;
+			}
+
+			output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+									      as->bTerminalLink);
+			if (output_term) {
+				clock = output_term->bCSourceID;
+				break;
+			}
+
+			snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+				   dev->devnum, iface_no, altno, as->bTerminalLink);
+			continue;
 		}
 
 		default:
@@ -338,6 +390,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 			fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
 					* (fp->maxpacksize & 0x7ff);
 		fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+		fp->clock = clock;
 
 		/* some quirks for attributes here */
 
@@ -374,6 +427,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 		if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
 			kfree(fp->rate_table);
 			kfree(fp);
+			fp = NULL;
 			continue;
 		}
 
diff --git a/sound/usb/format.c b/sound/usb/format.c
index fe29d61de19..30364aba79c 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -29,6 +29,7 @@
 #include "quirks.h"
 #include "helper.h"
 #include "debug.h"
+#include "clock.h"
 
 /*
  * parse the audio format type I descriptor
@@ -205,6 +206,60 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 }
 
 /*
+ * Helper function to walk the array of sample rate triplets reported by
+ * the device. The problem is that we need to parse whole array first to
+ * get to know how many sample rates we have to expect.
+ * Then fp->rate_table can be allocated and filled.
+ */
+static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
+					const unsigned char *data)
+{
+	int i, nr_rates = 0;
+
+	fp->rates = fp->rate_min = fp->rate_max = 0;
+
+	for (i = 0; i < nr_triplets; i++) {
+		int min = combine_quad(&data[2 + 12 * i]);
+		int max = combine_quad(&data[6 + 12 * i]);
+		int res = combine_quad(&data[10 + 12 * i]);
+		int rate;
+
+		if ((max < 0) || (min < 0) || (res < 0) || (max < min))
+			continue;
+
+		/*
+		 * for ranges with res == 1, we announce a continuous sample
+		 * rate range, and this function should return 0 for no further
+		 * parsing.
+		 */
+		if (res == 1) {
+			fp->rate_min = min;
+			fp->rate_max = max;
+			fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
+			return 0;
+		}
+
+		for (rate = min; rate <= max; rate += res) {
+			if (fp->rate_table)
+				fp->rate_table[nr_rates] = rate;
+			if (!fp->rate_min || rate < fp->rate_min)
+				fp->rate_min = rate;
+			if (!fp->rate_max || rate > fp->rate_max)
+				fp->rate_max = rate;
+			fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+
+			nr_rates++;
+
+			/* avoid endless loop */
+			if (res == 0)
+				break;
+		}
+	}
+
+	return nr_rates;
+}
+
+/*
  * parse the format descriptor and stores the possible sample rates
  * on the audioformat table (audio class v2).
  */
@@ -214,21 +269,30 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 {
 	struct usb_device *dev = chip->dev;
 	unsigned char tmp[2], *data;
-	int i, nr_rates, data_size, ret = 0;
+	int nr_triplets, data_size, ret = 0;
+	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
+
+	if (clock < 0) {
+		snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
+				__func__, clock);
+		goto err;
+	}
 
 	/* get the number of sample rates first by only fetching 2 bytes */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
 			      tmp, sizeof(tmp), 1000);
 
 	if (ret < 0) {
-		snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+		snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+				__func__, clock);
 		goto err;
 	}
 
-	nr_rates = (tmp[1] << 8) | tmp[0];
-	data_size = 2 + 12 * nr_rates;
+	nr_triplets = (tmp[1] << 8) | tmp[0];
+	data_size = 2 + 12 * nr_triplets;
 	data = kzalloc(data_size, GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -237,36 +301,40 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 
 	/* now get the full information */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
-			       USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			       UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-			       data, data_size, 1000);
+			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      data, data_size, 1000);
 
 	if (ret < 0) {
-		snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+		snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+				__func__, clock);
 		ret = -EINVAL;
 		goto err_free;
 	}
 
-	fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+	/* Call the triplet parser, and make sure fp->rate_table is NULL.
+	 * We just use the return value to know how many sample rates we
+	 * will have to deal with. */
+	kfree(fp->rate_table);
+	fp->rate_table = NULL;
+	fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
+
+	if (fp->nr_rates == 0) {
+		/* SNDRV_PCM_RATE_CONTINUOUS */
+		ret = 0;
+		goto err_free;
+	}
+
+	fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
 	if (!fp->rate_table) {
 		ret = -ENOMEM;
 		goto err_free;
 	}
 
-	fp->nr_rates = 0;
-	fp->rate_min = fp->rate_max = 0;
-
-	for (i = 0; i < nr_rates; i++) {
-		int rate = combine_quad(&data[2 + 12 * i]);
-
-		fp->rate_table[fp->nr_rates] = rate;
-		if (!fp->rate_min || rate < fp->rate_min)
-			fp->rate_min = rate;
-		if (!fp->rate_max || rate > fp->rate_max)
-			fp->rate_max = rate;
-		fp->rates |= snd_pcm_rate_to_rate_bit(rate);
-		fp->nr_rates++;
-	}
+	/* Call the triplet parser again, but this time, fp->rate_table is
+	 * allocated, so the rates will be stored */
+	parse_uac2_sample_rate_range(fp, nr_triplets, data);
 
 err_free:
 	kfree(data);
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index a6b0e51b3a9..09bd943c43b 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -28,5 +28,9 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
 #define snd_usb_get_speed(dev) ((dev)->speed)
 #endif
 
+static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+{
+	return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+}
 
 #endif /* __USBAUDIO_HELPER_H */
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 03ce971e002..736d134cc03 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -78,39 +78,6 @@ enum {
 	USB_MIXER_U16,
 };
 
-enum {
-	USB_PROC_UPDOWN = 1,
-	USB_PROC_UPDOWN_SWITCH = 1,
-	USB_PROC_UPDOWN_MODE_SEL = 2,
-
-	USB_PROC_PROLOGIC = 2,
-	USB_PROC_PROLOGIC_SWITCH = 1,
-	USB_PROC_PROLOGIC_MODE_SEL = 2,
-
-	USB_PROC_3DENH = 3,
-	USB_PROC_3DENH_SWITCH = 1,
-	USB_PROC_3DENH_SPACE = 2,
-
-	USB_PROC_REVERB = 4,
-	USB_PROC_REVERB_SWITCH = 1,
-	USB_PROC_REVERB_LEVEL = 2,
-	USB_PROC_REVERB_TIME = 3,
-	USB_PROC_REVERB_DELAY = 4,
-
-	USB_PROC_CHORUS = 5,
-	USB_PROC_CHORUS_SWITCH = 1,
-	USB_PROC_CHORUS_LEVEL = 2,
-	USB_PROC_CHORUS_RATE = 3,
-	USB_PROC_CHORUS_DEPTH = 4,
-
-	USB_PROC_DCR = 6,
-	USB_PROC_DCR_SWITCH = 1,
-	USB_PROC_DCR_RATIO = 2,
-	USB_PROC_DCR_MAX_AMP = 3,
-	USB_PROC_DCR_THRESHOLD = 4,
-	USB_PROC_DCR_ATTACK = 5,
-	USB_PROC_DCR_RELEASE = 6,
-};
 
 /*E-mu 0202(0404) eXtension Unit(XU) control*/
 enum {
@@ -198,22 +165,24 @@ static int check_mapped_selector_name(struct mixer_build *state, int unitid,
 
 /*
  * find an audio control unit with the given unit id
- * this doesn't return any clock related units, so they need to be handled elsewhere
  */
 static void *find_audio_control_unit(struct mixer_build *state, unsigned char unit)
 {
-	unsigned char *p;
+	/* we just parse the header */
+	struct uac_feature_unit_descriptor *hdr = NULL;
 
-	p = NULL;
-	while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
-				      USB_DT_CS_INTERFACE)) != NULL) {
-		if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC2_EXTENSION_UNIT_V2 && p[3] == unit)
-			return p;
+	while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
+					USB_DT_CS_INTERFACE)) != NULL) {
+		if (hdr->bLength >= 4 &&
+		    hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
+		    hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+		    hdr->bUnitID == unit)
+			return hdr;
 	}
+
 	return NULL;
 }
 
-
 /*
  * copy a string with the given id
  */
@@ -328,27 +297,36 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v
 
 static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
 {
-	unsigned char buf[14]; /* enough space for one range of 4 bytes */
+	unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
 	unsigned char *val;
-	int ret;
+	int ret, size;
 	__u8 bRequest;
 
-	bRequest = (request == UAC_GET_CUR) ?
-		UAC2_CS_CUR : UAC2_CS_RANGE;
+	if (request == UAC_GET_CUR) {
+		bRequest = UAC2_CS_CUR;
+		size = sizeof(__u16);
+	} else {
+		bRequest = UAC2_CS_RANGE;
+		size = sizeof(buf);
+	}
+
+	memset(buf, 0, sizeof(buf));
 
 	ret = snd_usb_ctl_msg(cval->mixer->chip->dev,
 			      usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
 			      bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      validx, cval->mixer->ctrlif | (cval->id << 8),
-			      buf, sizeof(buf), 1000);
+			      buf, size, 1000);
 
 	if (ret < 0) {
-		snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
-			    request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+		snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+			   request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
 		return ret;
 	}
 
+	/* FIXME: how should we handle multiple triplets here? */
+
 	switch (request) {
 	case UAC_GET_CUR:
 		val = buf;
@@ -462,6 +440,16 @@ static int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel,
 			     int index, int value)
 {
 	int err;
+	unsigned int read_only = (channel == 0) ?
+		cval->master_readonly :
+		cval->ch_readonly & (1 << (channel - 1));
+
+	if (read_only) {
+		snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+			    __func__, channel, cval->control);
+		return 0;
+	}
+
 	err = snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
 			    value);
 	if (err < 0)
@@ -631,6 +619,7 @@ static int get_term_name(struct mixer_build *state, struct usb_audio_term *iterm
  */
 static int check_input_term(struct mixer_build *state, int id, struct usb_audio_term *term)
 {
+	int err;
 	void *p1;
 
 	memset(term, 0, sizeof(*term));
@@ -651,6 +640,11 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
 				term->channels = d->bNrChannels;
 				term->chconfig = le32_to_cpu(d->bmChannelConfig);
 				term->name = d->iTerminal;
+
+				/* call recursively to get the clock selectors */
+				err = check_input_term(state, d->bCSourceID, term);
+				if (err < 0)
+					return err;
 			}
 			return 0;
 		case UAC_FEATURE_UNIT: {
@@ -667,7 +661,8 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
 			term->name = uac_mixer_unit_iMixer(d);
 			return 0;
 		}
-		case UAC_SELECTOR_UNIT: {
+		case UAC_SELECTOR_UNIT:
+		case UAC2_CLOCK_SELECTOR: {
 			struct uac_selector_unit_descriptor *d = p1;
 			/* call recursively to retrieve the channel info */
 			if (check_input_term(state, d->baSourceID[0], term) < 0)
@@ -690,6 +685,13 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
 			term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
 			return 0;
 		}
+		case UAC2_CLOCK_SOURCE: {
+			struct uac_clock_source_descriptor *d = p1;
+			term->type = d->bDescriptorSubtype << 16; /* virtual type */
+			term->id = id;
+			term->name = d->iClockSource;
+			return 0;
+		}
 		default:
 			return -ENODEV;
 		}
@@ -709,16 +711,20 @@ struct usb_feature_control_info {
 };
 
 static struct usb_feature_control_info audio_feature_info[] = {
-	{ "Mute",		USB_MIXER_INV_BOOLEAN },
-	{ "Volume",		USB_MIXER_S16 },
+	{ "Mute",			USB_MIXER_INV_BOOLEAN },
+	{ "Volume",			USB_MIXER_S16 },
 	{ "Tone Control - Bass",	USB_MIXER_S8 },
 	{ "Tone Control - Mid",		USB_MIXER_S8 },
 	{ "Tone Control - Treble",	USB_MIXER_S8 },
 	{ "Graphic Equalizer",		USB_MIXER_S8 }, /* FIXME: not implemeted yet */
-	{ "Auto Gain Control",	USB_MIXER_BOOLEAN },
-	{ "Delay Control",	USB_MIXER_U16 },
-	{ "Bass Boost",		USB_MIXER_BOOLEAN },
-	{ "Loudness",		USB_MIXER_BOOLEAN },
+	{ "Auto Gain Control",		USB_MIXER_BOOLEAN },
+	{ "Delay Control",		USB_MIXER_U16 },
+	{ "Bass Boost",			USB_MIXER_BOOLEAN },
+	{ "Loudness",			USB_MIXER_BOOLEAN },
+	/* UAC2 specific */
+	{ "Input Gain Control",		USB_MIXER_U16 },
+	{ "Input Gain Pad Control",	USB_MIXER_BOOLEAN },
+	{ "Phase Inverter Control",	USB_MIXER_BOOLEAN },
 };
 
 
@@ -958,7 +964,7 @@ static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
 static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 			      unsigned int ctl_mask, int control,
 			      struct usb_audio_term *iterm, int unitid,
-			      int read_only)
+			      int readonly_mask)
 {
 	struct uac_feature_unit_descriptor *desc = raw_desc;
 	unsigned int len = 0;
@@ -970,7 +976,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 
 	control++; /* change from zero-based to 1-based value */
 
-	if (control == UAC_GRAPHIC_EQUALIZER_CONTROL) {
+	if (control == UAC_FU_GRAPHIC_EQUALIZER) {
 		/* FIXME: not supported yet */
 		return;
 	}
@@ -989,20 +995,25 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 	cval->control = control;
 	cval->cmask = ctl_mask;
 	cval->val_type = audio_feature_info[control-1].type;
-	if (ctl_mask == 0)
+	if (ctl_mask == 0) {
 		cval->channels = 1;	/* master channel */
-	else {
+		cval->master_readonly = readonly_mask;
+	} else {
 		int i, c = 0;
 		for (i = 0; i < 16; i++)
 			if (ctl_mask & (1 << i))
 				c++;
 		cval->channels = c;
+		cval->ch_readonly = readonly_mask;
 	}
 
 	/* get min/max values */
 	get_min_max(cval, 0);
 
-	if (read_only)
+	/* if all channels in the mask are marked read-only, make the control
+	 * read-only. set_cur_mix_value() will check the mask again and won't
+	 * issue write commands to read-only channels. */
+	if (cval->channels == readonly_mask)
 		kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
 	else
 		kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
@@ -1021,8 +1032,8 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 				kctl->id.name, sizeof(kctl->id.name));
 
 	switch (control) {
-	case UAC_MUTE_CONTROL:
-	case UAC_VOLUME_CONTROL:
+	case UAC_FU_MUTE:
+	case UAC_FU_VOLUME:
 		/* determine the control name.  the rule is:
 		 * - if a name id is given in descriptor, use it.
 		 * - if the connected input can be determined, then use the name
@@ -1049,9 +1060,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 				len = append_ctl_name(kctl, " Playback");
 			}
 		}
-		append_ctl_name(kctl, control == UAC_MUTE_CONTROL ?
+		append_ctl_name(kctl, control == UAC_FU_MUTE ?
 				" Switch" : " Volume");
-		if (control == UAC_VOLUME_CONTROL) {
+		if (control == UAC_FU_VOLUME) {
 			kctl->tlv.c = mixer_vol_tlv;
 			kctl->vd[0].access |= 
 				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1096,6 +1107,19 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 		}
 		break;
 
+	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x0991):
+	/* Most audio usb devices lie about volume resolution.
+	 * Most Logitech webcams have res = 384.
+	 * Proboly there is some logitech magic behind this number --fishor
+	 */
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set resolution quirk: cval->res = 384\n");
+			cval->res = 384;
+		}
+		break;
+
 	}
 
 	snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
@@ -1150,7 +1174,7 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
 		snd_printk(KERN_INFO
 			   "usbmixer: master volume quirk for PCM2702 chip\n");
 		/* disable non-functional volume control */
-		master_bits &= ~UAC_FU_VOLUME;
+		master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
 		break;
 	}
 	if (channels > 0)
@@ -1188,19 +1212,22 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
 
 			for (j = 0; j < channels; j++) {
 				unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize);
-				if (mask & (1 << (i * 2))) {
+				if (uac2_control_is_readable(mask, i)) {
 					ch_bits |= (1 << j);
-					if (~mask & (1 << ((i * 2) + 1)))
+					if (!uac2_control_is_writeable(mask, i))
 						ch_read_only |= (1 << j);
 				}
 			}
 
-			/* FIXME: the whole unit is read-only if any of the channels is marked read-only */
+			/* NOTE: build_feature_ctl() will mark the control read-only if all channels
+			 * are marked read-only in the descriptors. Otherwise, the control will be
+			 * reported as writeable, but the driver will not actually issue a write
+			 * command for read-only channels */
 			if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
-				build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, !!ch_read_only);
-			if (master_bits & (1 << i * 2))
+				build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only);
+			if (uac2_control_is_readable(master_bits, i))
 				build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
-						  ~master_bits & (1 << ((i * 2) + 1)));
+						  !uac2_control_is_writeable(master_bits, i));
 		}
 	}
 
@@ -1392,51 +1419,51 @@ struct procunit_info {
 };
 
 static struct procunit_value_info updown_proc_info[] = {
-	{ USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+	{ UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
 	{ 0 }
 };
 static struct procunit_value_info prologic_proc_info[] = {
-	{ USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+	{ UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
 	{ 0 }
 };
 static struct procunit_value_info threed_enh_proc_info[] = {
-	{ USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 },
+	{ UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
 	{ 0 }
 };
 static struct procunit_value_info reverb_proc_info[] = {
-	{ USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
-	{ USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 },
-	{ USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 },
+	{ UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
+	{ UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
+	{ UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
 	{ 0 }
 };
 static struct procunit_value_info chorus_proc_info[] = {
-	{ USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
-	{ USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
-	{ USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
+	{ UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
+	{ UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
+	{ UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
 	{ 0 }
 };
 static struct procunit_value_info dcr_proc_info[] = {
-	{ USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 },
-	{ USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 },
-	{ USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
-	{ USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 },
-	{ USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 },
+	{ UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
+	{ UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
+	{ UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
+	{ UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
+	{ UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
 	{ 0 }
 };
 
 static struct procunit_info procunits[] = {
-	{ USB_PROC_UPDOWN, "Up Down", updown_proc_info },
-	{ USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info },
-	{ USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info },
-	{ USB_PROC_REVERB, "Reverb", reverb_proc_info },
-	{ USB_PROC_CHORUS, "Chorus", chorus_proc_info },
-	{ USB_PROC_DCR, "DCR", dcr_proc_info },
+	{ UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
+	{ UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
+	{ UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
+	{ UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
+	{ UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
+	{ UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
 	{ 0 },
 };
 /*
@@ -1524,7 +1551,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
 		cval->channels = 1;
 
 		/* get min/max values */
-		if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) {
+		if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
 			__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
 			/* FIXME: hard-coded */
 			cval->min = 1;
@@ -1619,7 +1646,7 @@ static int mixer_ctl_selector_get(struct snd_kcontrol *kcontrol, struct snd_ctl_
 	struct usb_mixer_elem_info *cval = kcontrol->private_data;
 	int val, err;
 
-	err = get_cur_ctl_value(cval, 0, &val);
+	err = get_cur_ctl_value(cval, cval->control << 8, &val);
 	if (err < 0) {
 		if (cval->mixer->ignore_ctl_error) {
 			ucontrol->value.enumerated.item[0] = 0;
@@ -1638,7 +1665,7 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 	struct usb_mixer_elem_info *cval = kcontrol->private_data;
 	int val, oval, err;
 
-	err = get_cur_ctl_value(cval, 0, &oval);
+	err = get_cur_ctl_value(cval, cval->control << 8, &oval);
 	if (err < 0) {
 		if (cval->mixer->ignore_ctl_error)
 			return 0;
@@ -1647,7 +1674,7 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 	val = ucontrol->value.enumerated.item[0];
 	val = get_abs_value(cval, val);
 	if (val != oval) {
-		set_cur_ctl_value(cval, 0, val);
+		set_cur_ctl_value(cval, cval->control << 8, val);
 		return 1;
 	}
 	return 0;
@@ -1729,6 +1756,11 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
 	cval->res = 1;
 	cval->initialized = 1;
 
+	if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+		cval->control = UAC2_CX_CLOCK_SELECTOR;
+	else
+		cval->control = 0;
+
 	namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
 	if (! namelist) {
 		snd_printk(KERN_ERR "cannot malloc\n");
@@ -1778,7 +1810,9 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
 		if (! len)
 			strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
 
-		if ((state->oterm.type & 0xff00) == 0x0100)
+		if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+			append_ctl_name(kctl, " Clock Source");
+		else if ((state->oterm.type & 0xff00) == 0x0100)
 			append_ctl_name(kctl, " Capture Source");
 		else
 			append_ctl_name(kctl, " Playback Source");
@@ -1812,10 +1846,12 @@ static int parse_audio_unit(struct mixer_build *state, int unitid)
 
 	switch (p1[2]) {
 	case UAC_INPUT_TERMINAL:
+	case UAC2_CLOCK_SOURCE:
 		return 0; /* NOP */
 	case UAC_MIXER_UNIT:
 		return parse_audio_mixer_unit(state, unitid, p1);
 	case UAC_SELECTOR_UNIT:
+	case UAC2_CLOCK_SELECTOR:
 		return parse_audio_selector_unit(state, unitid, p1);
 	case UAC_FEATURE_UNIT:
 		return parse_audio_feature_unit(state, unitid, p1);
@@ -1912,6 +1948,11 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 			err = parse_audio_unit(&state, desc->bSourceID);
 			if (err < 0)
 				return err;
+
+			/* for UAC2, use the same approach to also add the clock selectors */
+			err = parse_audio_unit(&state, desc->bCSourceID);
+			if (err < 0)
+				return err;
 		}
 	}
 
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 130123854a6..a7cf1007fbb 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -34,6 +34,8 @@ struct usb_mixer_elem_info {
 	unsigned int id;
 	unsigned int control;	/* CS or ICN (high byte) */
 	unsigned int cmask; /* channel mask bitmap: 0 = master */
+	unsigned int ch_readonly;
+	unsigned int master_readonly;
 	int channels;
 	int val_type;
 	int min, max, res;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d93fc89beba..f1324c42383 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -85,8 +85,8 @@ static struct usbmix_name_map extigy_map[] = {
 	/* 16: MU (w/o controls) */
 	{ 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */
 	{ 17, "Channel Routing", 2 },	/* PU: mode select */
-	{ 18, "Tone Control - Bass", UAC_BASS_CONTROL }, /* FU */
-	{ 18, "Tone Control - Treble", UAC_TREBLE_CONTROL }, /* FU */
+	{ 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */
+	{ 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */
 	{ 18, "Master Playback" }, /* FU; others */
 	/* 19: OT speaker */
 	/* 20: OT headphone */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 056587de7be..456829882f4 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -31,6 +31,7 @@
 #include "urb.h"
 #include "helper.h"
 #include "pcm.h"
+#include "clock.h"
 
 /*
  * return the current pcm pointer.  just based on the hwptr_done value.
@@ -181,103 +182,6 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
 	return -EINVAL;
 }
 
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
-			      struct usb_host_interface *alts,
-			      struct audioformat *fmt, int rate)
-{
-	struct usb_device *dev = chip->dev;
-	unsigned int ep;
-	unsigned char data[3];
-	int err, crate;
-
-	ep = get_endpoint(alts, 0)->bEndpointAddress;
-	/* if endpoint doesn't have sampling rate control, bail out */
-	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
-		snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
-				   dev->devnum, iface, fmt->altsetting);
-		return 0;
-	}
-
-	data[0] = rate;
-	data[1] = rate >> 8;
-	data[2] = rate >> 16;
-	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
-				   USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
-				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
-			   dev->devnum, iface, fmt->altsetting, rate, ep);
-		return err;
-	}
-	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
-				   USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
-				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
-			   dev->devnum, iface, fmt->altsetting, ep);
-		return 0; /* some devices don't support reading */
-	}
-	crate = data[0] | (data[1] << 8) | (data[2] << 16);
-	if (crate != rate) {
-		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-		// runtime->rate = crate;
-	}
-
-	return 0;
-}
-
-static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
-			      struct usb_host_interface *alts,
-			      struct audioformat *fmt, int rate)
-{
-	struct usb_device *dev = chip->dev;
-	unsigned char data[4];
-	int err, crate;
-
-	data[0] = rate;
-	data[1] = rate >> 8;
-	data[2] = rate >> 16;
-	data[3] = rate >> 24;
-	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
-				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
-			   dev->devnum, iface, fmt->altsetting, rate);
-		return err;
-	}
-	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
-				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
-			   dev->devnum, iface, fmt->altsetting);
-		return err;
-	}
-	crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
-	if (crate != rate)
-		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-
-	return 0;
-}
-
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
-			     struct usb_host_interface *alts,
-			     struct audioformat *fmt, int rate)
-{
-	struct usb_interface_descriptor *altsd = get_iface_desc(alts);
-
-	switch (altsd->bInterfaceProtocol) {
-	case UAC_VERSION_1:
-		return set_sample_rate_v1(chip, iface, alts, fmt, rate);
-
-	case UAC_VERSION_2:
-		return set_sample_rate_v2(chip, iface, alts, fmt, rate);
-	}
-
-	return -EINVAL;
-}
-
 /*
  * find a matching format and set up the interface
  */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 06ebf24d3a4..24d3319cc34 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,9 +40,6 @@ struct snd_usb_audio {
 	int num_interfaces;
 	int num_suspended_intf;
 
-	/* for audio class v2 */
-	int clock_id;
-
 	struct list_head pcm_list;	/* list of pcm streams */
 	int pcm_devs;
 
@@ -53,6 +50,8 @@ struct snd_usb_audio {
 	int setup;			/* from the 'device_setup' module param */
 	int nrpacks;			/* from the 'nrpacks' module param */
 	int async_unlink;		/* from the 'async_unlink' module param */
+
+	struct usb_host_interface *ctrl_intf;	/* the audio control interface */
 };
 
 /*
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3d8f31ed771..d75c28a825f 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -600,30 +600,32 @@ endif
 
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
-else ifdef HAVE_CPLUS_DEMANGLE
-	EXTLIBS += -liberty
-	BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
 else
-	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
-
-	ifeq ($(has_bfd),y)
-		EXTLIBS += -lbfd
+	ifdef HAVE_CPLUS_DEMANGLE
+		EXTLIBS += -liberty
+		BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
 	else
-		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
-		ifeq ($(has_bfd_iberty),y)
-			EXTLIBS += -lbfd -liberty
+		has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+
+		ifeq ($(has_bfd),y)
+			EXTLIBS += -lbfd
 		else
-			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
-			ifeq ($(has_bfd_iberty_z),y)
-				EXTLIBS += -lbfd -liberty -lz
+			has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+			ifeq ($(has_bfd_iberty),y)
+				EXTLIBS += -lbfd -liberty
 			else
-				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
-				ifeq ($(has_cplus_demangle),y)
-					EXTLIBS += -liberty
-					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+				has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+				ifeq ($(has_bfd_iberty_z),y)
+					EXTLIBS += -lbfd -liberty -lz
 				else
-					msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
-					BASIC_CFLAGS += -DNO_DEMANGLE
+					has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+					ifeq ($(has_cplus_demangle),y)
+						EXTLIBS += -liberty
+						BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+					else
+						msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
+						BASIC_CFLAGS += -DNO_DEMANGLE
+					endif
 				endif
 			endif
 		endif
diff --git a/tools/perf/arch/arm/Makefile b/tools/perf/arch/arm/Makefile
new file mode 100644
index 00000000000..15130b50dfe
--- /dev/null
+++ b/tools/perf/arch/arm/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/arm/util/dwarf-regs.c b/tools/perf/arch/arm/util/dwarf-regs.c
new file mode 100644
index 00000000000..fff6450c8c9
--- /dev/null
+++ b/tools/perf/arch/arm/util/dwarf-regs.c
@@ -0,0 +1,64 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+struct pt_regs_dwarfnum {
+	const char *name;
+	unsigned int dwarfnum;
+};
+
+#define STR(s) #s
+#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
+#define GPR_DWARFNUM_NAME(num) \
+	{.name = STR(%r##num), .dwarfnum = num}
+#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
+
+/*
+ * Reference:
+ * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0040a/IHI0040A_aadwarf.pdf
+ */
+static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
+	GPR_DWARFNUM_NAME(0),
+	GPR_DWARFNUM_NAME(1),
+	GPR_DWARFNUM_NAME(2),
+	GPR_DWARFNUM_NAME(3),
+	GPR_DWARFNUM_NAME(4),
+	GPR_DWARFNUM_NAME(5),
+	GPR_DWARFNUM_NAME(6),
+	GPR_DWARFNUM_NAME(7),
+	GPR_DWARFNUM_NAME(8),
+	GPR_DWARFNUM_NAME(9),
+	GPR_DWARFNUM_NAME(10),
+	REG_DWARFNUM_NAME("%fp", 11),
+	REG_DWARFNUM_NAME("%ip", 12),
+	REG_DWARFNUM_NAME("%sp", 13),
+	REG_DWARFNUM_NAME("%lr", 14),
+	REG_DWARFNUM_NAME("%pc", 15),
+	REG_DWARFNUM_END,
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n:	the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+	const struct pt_regs_dwarfnum *roff;
+	for (roff = regdwarfnum_table; roff->name != NULL; roff++)
+		if (roff->dwarfnum == n)
+			return roff->name;
+	return NULL;
+}
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
new file mode 100644
index 00000000000..15130b50dfe
--- /dev/null
+++ b/tools/perf/arch/sparc/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/sparc/util/dwarf-regs.c b/tools/perf/arch/sparc/util/dwarf-regs.c
new file mode 100644
index 00000000000..0ab88483720
--- /dev/null
+++ b/tools/perf/arch/sparc/util/dwarf-regs.c
@@ -0,0 +1,43 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define SPARC_MAX_REGS	96
+
+const char *sparc_regs_table[SPARC_MAX_REGS] = {
+	"%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+	"%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7",
+	"%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+	"%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7",
+	"%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
+	"%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15",
+	"%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23",
+	"%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31",
+	"%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39",
+	"%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47",
+	"%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55",
+	"%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63",
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n:	the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+	return (n <= SPARC_MAX_REGS) ? sparc_regs_table[n] : NULL;
+}
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 44a47e13bd6..99890728409 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -43,8 +43,10 @@ static int __cmd_buildid_list(void)
 	if (session == NULL)
 		return -1;
 
-	if (with_hits)
+	if (with_hits) {
+		symbol_conf.full_paths = true;
 		perf_session__process_events(session, &build_id__mark_dso_hit_ops);
+	}
 
 	perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
 
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 9bc89050e6f..711745f56bb 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -193,7 +193,7 @@ static void sig_handler(int sig)
 
 static void sig_atexit(void)
 {
-	if (child_pid != -1)
+	if (child_pid > 0)
 		kill(child_pid, SIGTERM);
 
 	if (signr == -1)
@@ -503,7 +503,6 @@ static int __cmd_record(int argc, const char **argv)
 {
 	int i, counter;
 	struct stat st;
-	pid_t pid = 0;
 	int flags;
 	int err;
 	unsigned long waking = 0;
@@ -572,7 +571,7 @@ static int __cmd_record(int argc, const char **argv)
 
 	if (forks) {
 		child_pid = fork();
-		if (pid < 0) {
+		if (child_pid < 0) {
 			perror("failed to fork");
 			exit(-1);
 		}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 35920578296..fd7407c7205 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -107,7 +107,7 @@ static int perf_session__add_hist_entry(struct perf_session *self,
 		goto out_free_syms;
 	err = 0;
 	if (symbol_conf.use_callchain) {
-		err = append_chain(he->callchain, data->callchain, syms);
+		err = append_chain(he->callchain, data->callchain, syms, data->period);
 		if (err)
 			goto out_free_syms;
 	}
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index f67bce2a83b..55f3b5dcc73 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1645,6 +1645,7 @@ static struct perf_event_ops event_ops = {
 	.sample			= process_sample_event,
 	.comm			= event__process_comm,
 	.lost			= event__process_lost,
+	.fork			= event__process_task,
 	.ordered_samples	= true,
 };
 
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 5a52ed9fc10..5161619d471 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -300,8 +300,9 @@ struct trace_entry {
 
 struct power_entry {
 	struct trace_entry te;
-	s64	type;
-	s64	value;
+	u64	type;
+	u64	value;
+	u64	cpu_id;
 };
 
 #define TASK_COMM_LEN 16
@@ -498,13 +499,13 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 			return 0;
 
 		if (strcmp(event_str, "power:power_start") == 0)
-			c_state_start(data.cpu, data.time, pe->value);
+			c_state_start(pe->cpu_id, data.time, pe->value);
 
 		if (strcmp(event_str, "power:power_end") == 0)
-			c_state_end(data.cpu, data.time);
+			c_state_end(pe->cpu_id, data.time);
 
 		if (strcmp(event_str, "power:power_frequency") == 0)
-			p_state_change(data.cpu, data.time, pe->value);
+			p_state_change(pe->cpu_id, data.time, pe->value);
 
 		if (strcmp(event_str, "sched:sched_wakeup") == 0)
 			sched_wakeup(data.cpu, data.time, data.pid, te);
diff --git a/tools/perf/scripts/python/check-perf-trace.py b/tools/perf/scripts/python/check-perf-trace.py
index 964d934395f..d9f7893e315 100644
--- a/tools/perf/scripts/python/check-perf-trace.py
+++ b/tools/perf/scripts/python/check-perf-trace.py
@@ -51,8 +51,7 @@ def kmem__kmalloc(event_name, context, common_cpu,
 
 		flag_str("kmem__kmalloc", "gfp_flags", gfp_flags)),
 
-def trace_unhandled(event_name, context, common_cpu, common_secs, common_nsecs,
-		common_pid, common_comm):
+def trace_unhandled(event_name, context, event_fields_dict):
     try:
         unhandled[event_name] += 1
     except TypeError:
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 49ece792191..97d76562a1a 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -5,17 +5,13 @@ if [ $# -eq 1 ]  ; then
 fi
 
 GVF=${OUTPUT}PERF-VERSION-FILE
-DEF_VER=v0.0.2.PERF
 
 LF='
 '
 
-# First see if there is a version file (included in release tarballs),
-# then try git-describe, then default.
-if test -f version
-then
-	VN=$(cat version) || VN="$DEF_VER"
-elif test -d .git -o -f .git &&
+# First check if there is a .git to get the version from git describe
+# otherwise try to get the version from the kernel makefile
+if test -d ../../.git -o -f ../../.git &&
 	VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
 	case "$VN" in
 	*$LF*) (exit 1) ;;
@@ -27,7 +23,12 @@ elif test -d .git -o -f .git &&
 then
 	VN=$(echo "$VN" | sed -e 's/-/./g');
 else
-	VN="$DEF_VER"
+	eval `grep '^VERSION\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^PATCHLEVEL\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^SUBLEVEL\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^EXTRAVERSION\s*=' ../../Makefile|tr -d ' '`
+
+	VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
 fi
 
 VN=$(expr "$VN" : v*'\(.*\)')
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 62b69ad4aa7..52c777e451e 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -230,7 +230,7 @@ fill_node(struct callchain_node *node, struct resolved_chain *chain, int start)
 
 static void
 add_child(struct callchain_node *parent, struct resolved_chain *chain,
-	  int start)
+	  int start, u64 period)
 {
 	struct callchain_node *new;
 
@@ -238,7 +238,7 @@ add_child(struct callchain_node *parent, struct resolved_chain *chain,
 	fill_node(new, chain, start);
 
 	new->children_hit = 0;
-	new->hit = 1;
+	new->hit = period;
 }
 
 /*
@@ -248,7 +248,8 @@ add_child(struct callchain_node *parent, struct resolved_chain *chain,
  */
 static void
 split_add_child(struct callchain_node *parent, struct resolved_chain *chain,
-		struct callchain_list *to_split, int idx_parents, int idx_local)
+		struct callchain_list *to_split, int idx_parents, int idx_local,
+		u64 period)
 {
 	struct callchain_node *new;
 	struct list_head *old_tail;
@@ -275,41 +276,41 @@ split_add_child(struct callchain_node *parent, struct resolved_chain *chain,
 	/* create a new child for the new branch if any */
 	if (idx_total < chain->nr) {
 		parent->hit = 0;
-		add_child(parent, chain, idx_total);
-		parent->children_hit++;
+		add_child(parent, chain, idx_total, period);
+		parent->children_hit += period;
 	} else {
-		parent->hit = 1;
+		parent->hit = period;
 	}
 }
 
 static int
 __append_chain(struct callchain_node *root, struct resolved_chain *chain,
-	       unsigned int start);
+	       unsigned int start, u64 period);
 
 static void
 __append_chain_children(struct callchain_node *root,
 			struct resolved_chain *chain,
-			unsigned int start)
+			unsigned int start, u64 period)
 {
 	struct callchain_node *rnode;
 
 	/* lookup in childrens */
 	chain_for_each_child(rnode, root) {
-		unsigned int ret = __append_chain(rnode, chain, start);
+		unsigned int ret = __append_chain(rnode, chain, start, period);
 
 		if (!ret)
 			goto inc_children_hit;
 	}
 	/* nothing in children, add to the current node */
-	add_child(root, chain, start);
+	add_child(root, chain, start, period);
 
 inc_children_hit:
-	root->children_hit++;
+	root->children_hit += period;
 }
 
 static int
 __append_chain(struct callchain_node *root, struct resolved_chain *chain,
-	       unsigned int start)
+	       unsigned int start, u64 period)
 {
 	struct callchain_list *cnode;
 	unsigned int i = start;
@@ -345,18 +346,18 @@ __append_chain(struct callchain_node *root, struct resolved_chain *chain,
 
 	/* we match only a part of the node. Split it and add the new chain */
 	if (i - start < root->val_nr) {
-		split_add_child(root, chain, cnode, start, i - start);
+		split_add_child(root, chain, cnode, start, i - start, period);
 		return 0;
 	}
 
 	/* we match 100% of the path, increment the hit */
 	if (i - start == root->val_nr && i == chain->nr) {
-		root->hit++;
+		root->hit += period;
 		return 0;
 	}
 
 	/* We match the node and still have a part remaining */
-	__append_chain_children(root, chain, i);
+	__append_chain_children(root, chain, i, period);
 
 	return 0;
 }
@@ -380,7 +381,7 @@ static void filter_context(struct ip_callchain *old, struct resolved_chain *new,
 
 
 int append_chain(struct callchain_node *root, struct ip_callchain *chain,
-		 struct map_symbol *syms)
+		 struct map_symbol *syms, u64 period)
 {
 	struct resolved_chain *filtered;
 
@@ -397,7 +398,7 @@ int append_chain(struct callchain_node *root, struct ip_callchain *chain,
 	if (!filtered->nr)
 		goto end;
 
-	__append_chain_children(root, filtered, 0);
+	__append_chain_children(root, filtered, 0, period);
 end:
 	free(filtered);
 
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 1ca73e4a272..f2e9ee164bd 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -49,6 +49,9 @@ static inline void callchain_init(struct callchain_node *node)
 	INIT_LIST_HEAD(&node->brothers);
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->val);
+
+	node->parent = NULL;
+	node->hit = 0;
 }
 
 static inline u64 cumul_hits(struct callchain_node *node)
@@ -58,7 +61,7 @@ static inline u64 cumul_hits(struct callchain_node *node)
 
 int register_callchain_param(struct callchain_param *param);
 int append_chain(struct callchain_node *root, struct ip_callchain *chain,
-		 struct map_symbol *syms);
+		 struct map_symbol *syms, u64 period);
 
 bool ip_callchain__valid(struct ip_callchain *chain, event_t *event);
 #endif	/* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 50771b5813e..2fbf6a463c8 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -370,9 +370,9 @@ static int thread__set_comm_adjust(struct thread *self, const char *comm)
 
 int event__process_comm(event_t *self, struct perf_session *session)
 {
-	struct thread *thread = perf_session__findnew(session, self->comm.pid);
+	struct thread *thread = perf_session__findnew(session, self->comm.tid);
 
-	dump_printf(": %s:%d\n", self->comm.comm, self->comm.pid);
+	dump_printf(": %s:%d\n", self->comm.comm, self->comm.tid);
 
 	if (thread == NULL || thread__set_comm_adjust(thread, self->comm.comm)) {
 		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
@@ -532,19 +532,16 @@ out_problem:
 
 int event__process_task(event_t *self, struct perf_session *session)
 {
-	struct thread *thread = perf_session__findnew(session, self->fork.pid);
-	struct thread *parent = perf_session__findnew(session, self->fork.ppid);
+	struct thread *thread = perf_session__findnew(session, self->fork.tid);
+	struct thread *parent = perf_session__findnew(session, self->fork.ptid);
 
 	dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
 		    self->fork.ppid, self->fork.ptid);
-	/*
-	 * A thread clone will have the same PID for both parent and child.
-	 */
-	if (thread == parent)
-		return 0;
 
-	if (self->header.type == PERF_RECORD_EXIT)
+	if (self->header.type == PERF_RECORD_EXIT) {
+		perf_session__remove_thread(session, thread);
 		return 0;
+	}
 
 	if (thread == NULL || parent == NULL ||
 	    thread__fork(thread, parent) < 0) {
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index cbf7eae2ce0..784ee0bdda7 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -631,9 +631,14 @@ int hist_entry__fprintf(struct hist_entry *self, struct hists *pair_hists,
 			u64 session_total)
 {
 	char bf[512];
-	hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
-			     show_displacement, displacement,
-			     true, session_total);
+	int ret;
+
+	ret = hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
+				   show_displacement, displacement,
+				   true, session_total);
+	if (!ret)
+		return 0;
+
 	return fprintf(fp, "%s\n", bf);
 }
 
@@ -762,6 +767,7 @@ size_t hists__fprintf(struct hists *self, struct hists *pair,
 print_entries:
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+		int cnt;
 
 		if (show_displacement) {
 			if (h->pair != NULL)
@@ -771,8 +777,13 @@ print_entries:
 				displacement = 0;
 			++position;
 		}
-		ret += hist_entry__fprintf(h, pair, show_displacement,
-					   displacement, fp, self->stats.total_period);
+		cnt = hist_entry__fprintf(h, pair, show_displacement,
+					  displacement, fp, self->stats.total_period);
+		/* Ignore those that didn't match the parent filter */
+		if (!cnt)
+			continue;
+
+		ret += cnt;
 
 		if (symbol_conf.use_callchain)
 			ret += hist_entry__fprintf_callchain(h, fp, self->stats.total_period);
@@ -965,13 +976,17 @@ static int hist_entry__parse_objdump_line(struct hist_entry *self, FILE *file,
 		 * Parse hexa addresses followed by ':'
 		 */
 		line_ip = strtoull(tmp, &tmp2, 16);
-		if (*tmp2 != ':')
+		if (*tmp2 != ':' || tmp == tmp2 || tmp2[1] == '\0')
 			line_ip = -1;
 	}
 
 	if (line_ip != -1) {
-		u64 start = map__rip_2objdump(self->ms.map, sym->start);
+		u64 start = map__rip_2objdump(self->ms.map, sym->start),
+		    end = map__rip_2objdump(self->ms.map, sym->end);
+
 		offset = line_ip - start;
+		if (offset < 0 || (u64)line_ip > end)
+			offset = -1;
 	}
 
 	objdump_line = objdump_line__new(offset, line);
diff --git a/tools/perf/util/newt.c b/tools/perf/util/newt.c
index cf182ca132f..7537ca15900 100644
--- a/tools/perf/util/newt.c
+++ b/tools/perf/util/newt.c
@@ -43,6 +43,9 @@ struct ui_progress *ui_progress__new(const char *title, u64 total)
 
 	if (self != NULL) {
 		int cols;
+
+		if (use_browser <= 0)	
+			return self;
 		newtGetScreenSize(&cols, NULL);
 		cols -= 4;
 		newtCenteredWindow(cols, 1, title);
@@ -67,14 +70,22 @@ out_free_self:
 
 void ui_progress__update(struct ui_progress *self, u64 curr)
 {
+	/*
+	 * FIXME: We should have a per UI backend way of showing progress,
+	 * stdio will just show a percentage as NN%, etc.
+	 */
+	if (use_browser <= 0)
+		return;
 	newtScaleSet(self->scale, curr);
 	newtRefresh();
 }
 
 void ui_progress__delete(struct ui_progress *self)
 {
-	newtFormDestroy(self->form);
-	newtPopWindow();
+	if (use_browser > 0) {
+		newtFormDestroy(self->form);
+		newtPopWindow();
+	}
 	free(self);
 }
 
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 81f39cab3aa..33a63252374 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -208,7 +208,7 @@ static void python_process_event(int cpu, void *data,
 				 int size __unused,
 				 unsigned long long nsecs, char *comm)
 {
-	PyObject *handler, *retval, *context, *t, *obj;
+	PyObject *handler, *retval, *context, *t, *obj, *dict = NULL;
 	static char handler_name[256];
 	struct format_field *field;
 	unsigned long long val;
@@ -232,6 +232,14 @@ static void python_process_event(int cpu, void *data,
 
 	sprintf(handler_name, "%s__%s", event->system, event->name);
 
+	handler = PyDict_GetItemString(main_dict, handler_name);
+	if (handler && !PyCallable_Check(handler))
+		handler = NULL;
+	if (!handler) {
+		dict = PyDict_New();
+		if (!dict)
+			Py_FatalError("couldn't create Python dict");
+	}
 	s = nsecs / NSECS_PER_SEC;
 	ns = nsecs - s * NSECS_PER_SEC;
 
@@ -242,12 +250,20 @@ static void python_process_event(int cpu, void *data,
 	PyTuple_SetItem(t, n++, PyString_FromString(handler_name));
 	PyTuple_SetItem(t, n++,
 			PyCObject_FromVoidPtr(scripting_context, NULL));
-	PyTuple_SetItem(t, n++, PyInt_FromLong(cpu));
-	PyTuple_SetItem(t, n++, PyInt_FromLong(s));
-	PyTuple_SetItem(t, n++, PyInt_FromLong(ns));
-	PyTuple_SetItem(t, n++, PyInt_FromLong(pid));
-	PyTuple_SetItem(t, n++, PyString_FromString(comm));
 
+	if (handler) {
+		PyTuple_SetItem(t, n++, PyInt_FromLong(cpu));
+		PyTuple_SetItem(t, n++, PyInt_FromLong(s));
+		PyTuple_SetItem(t, n++, PyInt_FromLong(ns));
+		PyTuple_SetItem(t, n++, PyInt_FromLong(pid));
+		PyTuple_SetItem(t, n++, PyString_FromString(comm));
+	} else {
+		PyDict_SetItemString(dict, "common_cpu", PyInt_FromLong(cpu));
+		PyDict_SetItemString(dict, "common_s", PyInt_FromLong(s));
+		PyDict_SetItemString(dict, "common_ns", PyInt_FromLong(ns));
+		PyDict_SetItemString(dict, "common_pid", PyInt_FromLong(pid));
+		PyDict_SetItemString(dict, "common_comm", PyString_FromString(comm));
+	}
 	for (field = event->format.fields; field; field = field->next) {
 		if (field->flags & FIELD_IS_STRING) {
 			int offset;
@@ -272,27 +288,31 @@ static void python_process_event(int cpu, void *data,
 					obj = PyLong_FromUnsignedLongLong(val);
 			}
 		}
-		PyTuple_SetItem(t, n++, obj);
+		if (handler)
+			PyTuple_SetItem(t, n++, obj);
+		else
+			PyDict_SetItemString(dict, field->name, obj);
+
 	}
+	if (!handler)
+		PyTuple_SetItem(t, n++, dict);
 
 	if (_PyTuple_Resize(&t, n) == -1)
 		Py_FatalError("error resizing Python tuple");
 
-	handler = PyDict_GetItemString(main_dict, handler_name);
-	if (handler && PyCallable_Check(handler)) {
+	if (handler) {
 		retval = PyObject_CallObject(handler, t);
 		if (retval == NULL)
 			handler_call_die(handler_name);
 	} else {
 		handler = PyDict_GetItemString(main_dict, "trace_unhandled");
 		if (handler && PyCallable_Check(handler)) {
-			if (_PyTuple_Resize(&t, N_COMMON_FIELDS) == -1)
-				Py_FatalError("error resizing Python tuple");
 
 			retval = PyObject_CallObject(handler, t);
 			if (retval == NULL)
 				handler_call_die("trace_unhandled");
 		}
+		Py_DECREF(dict);
 	}
 
 	Py_DECREF(t);
@@ -548,12 +568,10 @@ static int python_generate_script(const char *outfile)
 	}
 
 	fprintf(ofp, "def trace_unhandled(event_name, context, "
-		"common_cpu, common_secs, common_nsecs,\n\t\t"
-		"common_pid, common_comm):\n");
+		"event_fields_dict):\n");
 
-	fprintf(ofp, "\t\tprint_header(event_name, common_cpu, "
-		"common_secs, common_nsecs,\n\t\tcommon_pid, "
-		"common_comm)\n\n");
+	fprintf(ofp, "\t\tprint ' '.join(['%%s=%%s'%%(k,str(v))"
+		"for k,v in sorted(event_fields_dict.items())])\n\n");
 
 	fprintf(ofp, "def print_header("
 		"event_name, cpu, secs, nsecs, pid, comm):\n"
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 8f83a183576..c422cd67631 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -90,6 +90,7 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 
 	memcpy(self->filename, filename, len);
 	self->threads = RB_ROOT;
+	INIT_LIST_HEAD(&self->dead_threads);
 	self->hists_tree = RB_ROOT;
 	self->last_match = NULL;
 	self->mmap_window = 32;
@@ -131,6 +132,16 @@ void perf_session__delete(struct perf_session *self)
 	free(self);
 }
 
+void perf_session__remove_thread(struct perf_session *self, struct thread *th)
+{
+	rb_erase(&th->rb_node, &self->threads);
+	/*
+	 * We may have references to this thread, for instance in some hist_entry
+	 * instances, so just move them to a separate list.
+	 */
+	list_add_tail(&th->node, &self->dead_threads);
+}
+
 static bool symbol__match_parent_regex(struct symbol *sym)
 {
 	if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 55c6881b218..9fa0fc2a863 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -26,6 +26,7 @@ struct perf_session {
 	unsigned long		size;
 	unsigned long		mmap_window;
 	struct rb_root		threads;
+	struct list_head	dead_threads;
 	struct thread		*last_match;
 	struct machine		host_machine;
 	struct rb_root		machines;
@@ -99,6 +100,7 @@ int perf_session__create_kernel_maps(struct perf_session *self);
 
 int do_read(int fd, void *buf, size_t size);
 void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__remove_thread(struct perf_session *self, struct thread *th);
 
 static inline
 struct machine *perf_session__find_host_machine(struct perf_session *self)
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 7fd6b151feb..5b276833e2b 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1443,6 +1443,7 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 {
 	struct dirent *dent;
 	DIR *dir = opendir(dir_name);
+	int ret = 0;
 
 	if (!dir) {
 		pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
@@ -1465,8 +1466,9 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 
 			snprintf(path, sizeof(path), "%s/%s",
 				 dir_name, dent->d_name);
-			if (map_groups__set_modules_path_dir(self, path) < 0)
-				goto failure;
+			ret = map_groups__set_modules_path_dir(self, path);
+			if (ret < 0)
+				goto out;
 		} else {
 			char *dot = strrchr(dent->d_name, '.'),
 			     dso_name[PATH_MAX];
@@ -1487,17 +1489,18 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 				 dir_name, dent->d_name);
 
 			long_name = strdup(path);
-			if (long_name == NULL)
-				goto failure;
+			if (long_name == NULL) {
+				ret = -1;
+				goto out;
+			}
 			dso__set_long_name(map->dso, long_name);
 			dso__kernel_module_get_build_id(map->dso, "");
 		}
 	}
 
-	return 0;
-failure:
+out:
 	closedir(dir);
-	return -1;
+	return ret;
 }
 
 static char *get_kernel_version(const char *root_dir)
@@ -1745,7 +1748,12 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	if (symbol_conf.vmlinux_name != NULL) {
 		err = dso__load_vmlinux(self, map,
 					symbol_conf.vmlinux_name, filter);
-		goto out_try_fixup;
+		if (err > 0) {
+			dso__set_long_name(self,
+					   strdup(symbol_conf.vmlinux_name));
+			goto out_fixup;
+		}
+		return err;
 	}
 
 	if (vmlinux_path != NULL) {
@@ -1806,7 +1814,6 @@ do_kallsyms:
 		pr_debug("Using %s for symbols\n", kallsyms_filename);
 	free(kallsyms_allocated_filename);
 
-out_try_fixup:
 	if (err > 0) {
 out_fixup:
 		if (kallsyms_filename != NULL)
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 1f7ecd47f49..9a448b47400 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -7,6 +7,15 @@
 #include "util.h"
 #include "debug.h"
 
+/* Skip "." and ".." directories */
+static int filter(const struct dirent *dir)
+{
+	if (dir->d_name[0] == '.')
+		return 0;
+	else
+		return 1;
+}
+
 int find_all_tid(int pid, pid_t ** all_tid)
 {
 	char name[256];
@@ -16,7 +25,7 @@ int find_all_tid(int pid, pid_t ** all_tid)
 	int i;
 
 	sprintf(name, "/proc/%d/task", pid);
-	items = scandir(name, &namelist, NULL, NULL);
+	items = scandir(name, &namelist, filter, NULL);
 	if (items <= 0)
                 return -ENOENT;
 	*all_tid = malloc(sizeof(pid_t) * items);
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 1dfd9ff8bdc..ee6bbcf277c 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -6,7 +6,10 @@
 #include "symbol.h"
 
 struct thread {
-	struct rb_node		rb_node;
+	union {
+		struct rb_node	 rb_node;
+		struct list_head node;
+	};
 	struct map_groups	mg;
 	pid_t			pid;
 	char			shortname[3];
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index 4d10b1e047f..7c98928b09d 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -1,7 +1,7 @@
 /*
  * Kernel-based Virtual Machine - device assignment support
  *
- * Copyright (C) 2006-9 Red Hat, Inc
+ * Copyright (C) 2010 Red Hat, Inc. and/or its affiliates.
  *
  * This work is licensed under the terms of the GNU GPL, version 2.  See
  * the COPYING file in the top-level directory.
@@ -58,12 +58,10 @@ static int find_index_from_host_irq(struct kvm_assigned_dev_kernel
 static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work)
 {
 	struct kvm_assigned_dev_kernel *assigned_dev;
-	struct kvm *kvm;
 	int i;
 
 	assigned_dev = container_of(work, struct kvm_assigned_dev_kernel,
 				    interrupt_work);
-	kvm = assigned_dev->kvm;
 
 	spin_lock_irq(&assigned_dev->assigned_dev_lock);
 	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
@@ -448,9 +446,6 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 	struct kvm_assigned_dev_kernel *match;
 	unsigned long host_irq_type, guest_irq_type;
 
-	if (!capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
 	if (!irqchip_in_kernel(kvm))
 		return r;
 
diff --git a/virt/kvm/coalesced_mmio.c b/virt/kvm/coalesced_mmio.c
index 53850177163..fc8487564d1 100644
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -2,6 +2,7 @@
  * KVM coalesced MMIO
  *
  * Copyright (c) 2008 Bull S.A.S.
+ * Copyright 2009 Red Hat, Inc. and/or its affiliates.
  *
  *  Author: Laurent Vivier <Laurent.Vivier@bull.net>
  *
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index b81f0ebbaaa..66cf65b510b 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -2,6 +2,7 @@
  * kvm eventfd support - use eventfd objects to signal various KVM events
  *
  * Copyright 2009 Novell.  All Rights Reserved.
+ * Copyright 2010 Red Hat, Inc. and/or its affiliates.
  *
  * Author:
  *	Gregory Haskins <ghaskins@novell.com>
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 7c79c1d76d0..0b9df8303dc 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 2001  MandrakeSoft S.A.
+ *  Copyright 2010 Red Hat, Inc. and/or its affiliates.
  *
  *    MandrakeSoft S.A.
  *    43, rue d'Aboukir
@@ -151,7 +152,7 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 		update_handled_vectors(ioapic);
 		mask_after = e->fields.mask;
 		if (mask_before != mask_after)
-			kvm_fire_mask_notifiers(ioapic->kvm, index, mask_after);
+			kvm_fire_mask_notifiers(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index, mask_after);
 		if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG
 		    && ioapic->irr & (1 << index))
 			ioapic_service(ioapic, index);
@@ -192,12 +193,13 @@ static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
 
 int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
 {
-	u32 old_irr = ioapic->irr;
+	u32 old_irr;
 	u32 mask = 1 << irq;
 	union kvm_ioapic_redirect_entry entry;
 	int ret = 1;
 
 	spin_lock(&ioapic->lock);
+	old_irr = ioapic->irr;
 	if (irq >= 0 && irq < IOAPIC_NUM_PINS) {
 		entry = ioapic->redirtbl[irq];
 		level ^= entry.fields.polarity;
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index d2f06be6335..62a9caf0563 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -16,6 +16,8 @@
  *
  * Copyright (C) 2006-2008 Intel Corporation
  * Copyright IBM Corporation, 2008
+ * Copyright 2010 Red Hat, Inc. and/or its affiliates.
+ *
  * Author: Allen M. Kay <allen.m.kay@intel.com>
  * Author: Weidong Han <weidong.han@intel.com>
  * Author: Ben-Ami Yassour <benami@il.ibm.com>
@@ -106,7 +108,7 @@ int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
 			      get_order(page_size), flags);
 		if (r) {
 			printk(KERN_ERR "kvm_iommu_map_address:"
-			       "iommu failed to map pfn=%lx\n", pfn);
+			       "iommu failed to map pfn=%llx\n", pfn);
 			goto unmap_pages;
 		}
 
@@ -124,9 +126,10 @@ unmap_pages:
 
 static int kvm_iommu_map_memslots(struct kvm *kvm)
 {
-	int i, r = 0;
+	int i, idx, r = 0;
 	struct kvm_memslots *slots;
 
+	idx = srcu_read_lock(&kvm->srcu);
 	slots = kvm_memslots(kvm);
 
 	for (i = 0; i < slots->nmemslots; i++) {
@@ -134,6 +137,7 @@ static int kvm_iommu_map_memslots(struct kvm *kvm)
 		if (r)
 			break;
 	}
+	srcu_read_unlock(&kvm->srcu, idx);
 
 	return r;
 }
@@ -271,7 +275,7 @@ static void kvm_iommu_put_pages(struct kvm *kvm,
 		pfn  = phys >> PAGE_SHIFT;
 
 		/* Unmap address from IO address space */
-		order       = iommu_unmap(domain, gfn_to_gpa(gfn), PAGE_SIZE);
+		order       = iommu_unmap(domain, gfn_to_gpa(gfn), 0);
 		unmap_pages = 1ULL << order;
 
 		/* Unpin all pages we just unmapped to not leak any memory */
@@ -283,15 +287,17 @@ static void kvm_iommu_put_pages(struct kvm *kvm,
 
 static int kvm_iommu_unmap_memslots(struct kvm *kvm)
 {
-	int i;
+	int i, idx;
 	struct kvm_memslots *slots;
 
+	idx = srcu_read_lock(&kvm->srcu);
 	slots = kvm_memslots(kvm);
 
 	for (i = 0; i < slots->nmemslots; i++) {
 		kvm_iommu_put_pages(kvm, slots->memslots[i].base_gfn,
 				    slots->memslots[i].npages);
 	}
+	srcu_read_unlock(&kvm->srcu, idx);
 
 	return 0;
 }
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index a0e88809e45..369e38010ad 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -17,6 +17,7 @@
  * Authors:
  *   Yaozu (Eddie) Dong <Eddie.dong@intel.com>
  *
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  */
 
 #include <linux/kvm_host.h>
@@ -99,7 +100,7 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
 			if (r < 0)
 				r = 0;
 			r += kvm_apic_set_irq(vcpu, irq);
-		} else {
+		} else if (kvm_lapic_enabled(vcpu)) {
 			if (!lowest)
 				lowest = vcpu;
 			else if (kvm_apic_compare_prio(vcpu, lowest) < 0)
@@ -278,15 +279,19 @@ void kvm_unregister_irq_mask_notifier(struct kvm *kvm, int irq,
 	synchronize_rcu();
 }
 
-void kvm_fire_mask_notifiers(struct kvm *kvm, int irq, bool mask)
+void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin,
+			     bool mask)
 {
 	struct kvm_irq_mask_notifier *kimn;
 	struct hlist_node *n;
+	int gsi;
 
 	rcu_read_lock();
-	hlist_for_each_entry_rcu(kimn, n, &kvm->mask_notifier_list, link)
-		if (kimn->irq == irq)
-			kimn->func(kimn, mask);
+	gsi = rcu_dereference(kvm->irq_routing)->chip[irqchip][pin];
+	if (gsi != -1)
+		hlist_for_each_entry_rcu(kimn, n, &kvm->mask_notifier_list, link)
+			if (kimn->irq == gsi)
+				kimn->func(kimn, mask);
 	rcu_read_unlock();
 }
 
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index f032806a212..b78b794c103 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -5,6 +5,7 @@
  * machines without emulation or binary translation.
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright 2010 Red Hat, Inc. and/or its affilates.
  *
  * Authors:
  *   Avi Kivity   <avi@qumranet.com>
@@ -92,6 +93,12 @@ static bool kvm_rebooting;
 
 static bool largepages_enabled = true;
 
+static struct page *hwpoison_page;
+static pfn_t hwpoison_pfn;
+
+static struct page *fault_page;
+static pfn_t fault_pfn;
+
 inline int kvm_is_mmio_pfn(pfn_t pfn)
 {
 	if (pfn_valid(pfn)) {
@@ -141,7 +148,7 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req)
 	raw_spin_lock(&kvm->requests_lock);
 	me = smp_processor_id();
 	kvm_for_each_vcpu(i, vcpu, kvm) {
-		if (test_and_set_bit(req, &vcpu->requests))
+		if (kvm_make_check_request(req, vcpu))
 			continue;
 		cpu = vcpu->cpu;
 		if (cpus != NULL && cpu != -1 && cpu != me)
@@ -566,6 +573,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 
 	new = old = *memslot;
 
+	new.id = mem->slot;
 	new.base_gfn = base_gfn;
 	new.npages = npages;
 	new.flags = mem->flags;
@@ -596,7 +604,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	/* Allocate if a slot is being created */
 #ifndef CONFIG_S390
 	if (npages && !new.rmap) {
-		new.rmap = vmalloc(npages * sizeof(struct page *));
+		new.rmap = vmalloc(npages * sizeof(*new.rmap));
 
 		if (!new.rmap)
 			goto out_free;
@@ -621,9 +629,9 @@ int __kvm_set_memory_region(struct kvm *kvm,
 		if (new.lpage_info[i])
 			continue;
 
-		lpages = 1 + (base_gfn + npages - 1) /
-			     KVM_PAGES_PER_HPAGE(level);
-		lpages -= base_gfn / KVM_PAGES_PER_HPAGE(level);
+		lpages = 1 + ((base_gfn + npages - 1)
+			     >> KVM_HPAGE_GFN_SHIFT(level));
+		lpages -= base_gfn >> KVM_HPAGE_GFN_SHIFT(level);
 
 		new.lpage_info[i] = vmalloc(lpages * sizeof(*new.lpage_info[i]));
 
@@ -633,9 +641,9 @@ int __kvm_set_memory_region(struct kvm *kvm,
 		memset(new.lpage_info[i], 0,
 		       lpages * sizeof(*new.lpage_info[i]));
 
-		if (base_gfn % KVM_PAGES_PER_HPAGE(level))
+		if (base_gfn & (KVM_PAGES_PER_HPAGE(level) - 1))
 			new.lpage_info[i][0].write_count = 1;
-		if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE(level))
+		if ((base_gfn+npages) & (KVM_PAGES_PER_HPAGE(level) - 1))
 			new.lpage_info[i][lpages - 1].write_count = 1;
 		ugfn = new.userspace_addr >> PAGE_SHIFT;
 		/*
@@ -810,16 +818,28 @@ EXPORT_SYMBOL_GPL(kvm_disable_largepages);
 
 int is_error_page(struct page *page)
 {
-	return page == bad_page;
+	return page == bad_page || page == hwpoison_page || page == fault_page;
 }
 EXPORT_SYMBOL_GPL(is_error_page);
 
 int is_error_pfn(pfn_t pfn)
 {
-	return pfn == bad_pfn;
+	return pfn == bad_pfn || pfn == hwpoison_pfn || pfn == fault_pfn;
 }
 EXPORT_SYMBOL_GPL(is_error_pfn);
 
+int is_hwpoison_pfn(pfn_t pfn)
+{
+	return pfn == hwpoison_pfn;
+}
+EXPORT_SYMBOL_GPL(is_hwpoison_pfn);
+
+int is_fault_pfn(pfn_t pfn)
+{
+	return pfn == fault_pfn;
+}
+EXPORT_SYMBOL_GPL(is_fault_pfn);
+
 static inline unsigned long bad_hva(void)
 {
 	return PAGE_OFFSET;
@@ -831,7 +851,7 @@ int kvm_is_error_hva(unsigned long addr)
 }
 EXPORT_SYMBOL_GPL(kvm_is_error_hva);
 
-struct kvm_memory_slot *gfn_to_memslot_unaliased(struct kvm *kvm, gfn_t gfn)
+struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn)
 {
 	int i;
 	struct kvm_memslots *slots = kvm_memslots(kvm);
@@ -845,20 +865,13 @@ struct kvm_memory_slot *gfn_to_memslot_unaliased(struct kvm *kvm, gfn_t gfn)
 	}
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(gfn_to_memslot_unaliased);
-
-struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn)
-{
-	gfn = unalias_gfn(kvm, gfn);
-	return gfn_to_memslot_unaliased(kvm, gfn);
-}
+EXPORT_SYMBOL_GPL(gfn_to_memslot);
 
 int kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	int i;
 	struct kvm_memslots *slots = kvm_memslots(kvm);
 
-	gfn = unalias_gfn_instantiation(kvm, gfn);
 	for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
 		struct kvm_memory_slot *memslot = &slots->memslots[i];
 
@@ -903,7 +916,6 @@ int memslot_id(struct kvm *kvm, gfn_t gfn)
 	struct kvm_memslots *slots = kvm_memslots(kvm);
 	struct kvm_memory_slot *memslot = NULL;
 
-	gfn = unalias_gfn(kvm, gfn);
 	for (i = 0; i < slots->nmemslots; ++i) {
 		memslot = &slots->memslots[i];
 
@@ -924,8 +936,7 @@ unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn)
 {
 	struct kvm_memory_slot *slot;
 
-	gfn = unalias_gfn_instantiation(kvm, gfn);
-	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	slot = gfn_to_memslot(kvm, gfn);
 	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
 		return bad_hva();
 	return gfn_to_hva_memslot(slot, gfn);
@@ -946,13 +957,19 @@ static pfn_t hva_to_pfn(struct kvm *kvm, unsigned long addr)
 		struct vm_area_struct *vma;
 
 		down_read(&current->mm->mmap_sem);
+		if (is_hwpoison_address(addr)) {
+			up_read(&current->mm->mmap_sem);
+			get_page(hwpoison_page);
+			return page_to_pfn(hwpoison_page);
+		}
+
 		vma = find_vma(current->mm, addr);
 
 		if (vma == NULL || addr < vma->vm_start ||
 		    !(vma->vm_flags & VM_PFNMAP)) {
 			up_read(&current->mm->mmap_sem);
-			get_page(bad_page);
-			return page_to_pfn(bad_page);
+			get_page(fault_page);
+			return page_to_pfn(fault_page);
 		}
 
 		pfn = ((addr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
@@ -1187,8 +1204,7 @@ void mark_page_dirty(struct kvm *kvm, gfn_t gfn)
 {
 	struct kvm_memory_slot *memslot;
 
-	gfn = unalias_gfn(kvm, gfn);
-	memslot = gfn_to_memslot_unaliased(kvm, gfn);
+	memslot = gfn_to_memslot(kvm, gfn);
 	if (memslot && memslot->dirty_bitmap) {
 		unsigned long rel_gfn = gfn - memslot->base_gfn;
 
@@ -1207,7 +1223,7 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 		prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
 
 		if (kvm_arch_vcpu_runnable(vcpu)) {
-			set_bit(KVM_REQ_UNHALT, &vcpu->requests);
+			kvm_make_request(KVM_REQ_UNHALT, vcpu);
 			break;
 		}
 		if (kvm_cpu_has_pending_timer(vcpu))
@@ -1378,6 +1394,18 @@ static long kvm_vcpu_ioctl(struct file *filp,
 
 	if (vcpu->kvm->mm != current->mm)
 		return -EIO;
+
+#if defined(CONFIG_S390) || defined(CONFIG_PPC)
+	/*
+	 * Special cases: vcpu ioctls that are asynchronous to vcpu execution,
+	 * so vcpu_load() would break it.
+	 */
+	if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT)
+		return kvm_arch_vcpu_ioctl(filp, ioctl, arg);
+#endif
+
+
+	vcpu_load(vcpu);
 	switch (ioctl) {
 	case KVM_RUN:
 		r = -EINVAL;
@@ -1520,7 +1548,7 @@ out_free2:
 				goto out;
 			p = &sigset;
 		}
-		r = kvm_vcpu_ioctl_set_sigmask(vcpu, &sigset);
+		r = kvm_vcpu_ioctl_set_sigmask(vcpu, p);
 		break;
 	}
 	case KVM_GET_FPU: {
@@ -1555,6 +1583,7 @@ out_free2:
 		r = kvm_arch_vcpu_ioctl(filp, ioctl, arg);
 	}
 out:
+	vcpu_put(vcpu);
 	kfree(fpu);
 	kfree(kvm_sregs);
 	return r;
@@ -2197,6 +2226,24 @@ int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align,
 
 	bad_pfn = page_to_pfn(bad_page);
 
+	hwpoison_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+
+	if (hwpoison_page == NULL) {
+		r = -ENOMEM;
+		goto out_free_0;
+	}
+
+	hwpoison_pfn = page_to_pfn(hwpoison_page);
+
+	fault_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+
+	if (fault_page == NULL) {
+		r = -ENOMEM;
+		goto out_free_0;
+	}
+
+	fault_pfn = page_to_pfn(fault_page);
+
 	if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
 		r = -ENOMEM;
 		goto out_free_0;
@@ -2269,6 +2316,10 @@ out_free_1:
 out_free_0a:
 	free_cpumask_var(cpus_hardware_enabled);
 out_free_0:
+	if (fault_page)
+		__free_page(fault_page);
+	if (hwpoison_page)
+		__free_page(hwpoison_page);
 	__free_page(bad_page);
 out:
 	kvm_arch_exit();
@@ -2290,6 +2341,7 @@ void kvm_exit(void)
 	kvm_arch_hardware_unsetup();
 	kvm_arch_exit();
 	free_cpumask_var(cpus_hardware_enabled);
+	__free_page(hwpoison_page);
 	__free_page(bad_page);
 }
 EXPORT_SYMBOL_GPL(kvm_exit);